diff options
Diffstat (limited to 'arch/arm/mach-ixp2000/enp2611.c')
| -rw-r--r-- | arch/arm/mach-ixp2000/enp2611.c | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c deleted file mode 100644 index 73df2f688813..000000000000 --- a/arch/arm/mach-ixp2000/enp2611.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * arch/arm/mach-ixp2000/enp2611.c - * - * Radisys ENP-2611 support. - * - * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The - * original version carries the following notices: - * - * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002-2003 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -/************************************************************************* - * ENP-2611 timer tick configuration - *************************************************************************/ -static void __init enp2611_timer_init(void) -{ - ixp2000_init_time(50 * 1000 * 1000); -} - -static struct sys_timer enp2611_timer = { - .init = enp2611_timer_init, - .offset = ixp2000_gettimeoffset, -}; - - -/************************************************************************* - * ENP-2611 I/O - *************************************************************************/ -static struct map_desc enp2611_io_desc[] __initdata = { - { - .virtual = ENP2611_CALEB_VIRT_BASE, - .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE), - .length = ENP2611_CALEB_SIZE, - .type = MT_DEVICE, - }, { - .virtual = ENP2611_PM3386_0_VIRT_BASE, - .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE), - .length = ENP2611_PM3386_0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = ENP2611_PM3386_1_VIRT_BASE, - .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE), - .length = ENP2611_PM3386_1_SIZE, - .type = MT_DEVICE, - } -}; - -void __init enp2611_map_io(void) -{ - ixp2000_map_io(); - iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc)); -} - - -/************************************************************************* - * ENP-2611 PCI - *************************************************************************/ -static int enp2611_pci_setup(int nr, struct pci_sys_data *sys) -{ - sys->mem_offset = 0xe0000000; - ixp2000_pci_setup(nr, sys); - return 1; -} - -static void __init enp2611_pci_preinit(void) -{ - ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); - ixp2000_pci_preinit(); - pcibios_setup("firmware"); -} - -static inline int enp2611_pci_valid_device(struct pci_bus *bus, - unsigned int devfn) -{ - /* The 82559 ethernet controller appears at both PCI:1:0:0 and - * PCI:1:2:0, so let's pretend the second one isn't there. - */ - if (bus->number == 0x01 && devfn == 0x10) - return 0; - - return 1; -} - -static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *value) -{ - if (enp2611_pci_valid_device(bus, devfn)) - return ixp2000_pci_read_config(bus, devfn, where, size, value); - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 value) -{ - if (enp2611_pci_valid_device(bus, devfn)) - return ixp2000_pci_write_config(bus, devfn, where, size, value); - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static struct pci_ops enp2611_pci_ops = { - .read = enp2611_pci_read_config, - .write = enp2611_pci_write_config -}; - -static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - int irq; - - if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) { - /* IXP2400. */ - irq = IRQ_IXP2000_PCIA; - } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) { - /* 21555 non-transparent bridge. */ - irq = IRQ_IXP2000_PCIB; - } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) { - /* PCI2050B transparent bridge. */ - irq = -1; - } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) { - /* 82559 ethernet. */ - irq = IRQ_IXP2000_PCIA; - } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) { - /* SPI-3 option board. */ - irq = IRQ_IXP2000_PCIB; - } else { - printk(KERN_ERR "enp2611_pci_map_irq() called for unknown " - "device PCI:%d:%d:%d\n", dev->bus->number, - PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - irq = -1; - } - - return irq; -} - -struct hw_pci enp2611_pci __initdata = { - .nr_controllers = 1, - .ops = &enp2611_pci_ops, - .setup = enp2611_pci_setup, - .preinit = enp2611_pci_preinit, - .map_irq = enp2611_pci_map_irq, -}; - -int __init enp2611_pci_init(void) -{ - if (machine_is_enp2611()) - pci_common_init(&enp2611_pci); - - return 0; -} - -subsys_initcall(enp2611_pci_init); - - -/************************************************************************* - * ENP-2611 Machine Initialization - *************************************************************************/ -static struct flash_platform_data enp2611_flash_platform_data = { - .map_name = "cfi_probe", - .width = 1, -}; - -static struct ixp2000_flash_data enp2611_flash_data = { - .platform_data = &enp2611_flash_platform_data, - .nr_banks = 1 -}; - -static struct resource enp2611_flash_resource = { - .start = 0xc4000000, - .end = 0xc4000000 + 0x00ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device enp2611_flash = { - .name = "IXP2000-Flash", - .id = 0, - .dev = { - .platform_data = &enp2611_flash_data, - }, - .num_resources = 1, - .resource = &enp2611_flash_resource, -}; - -static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = { - .sda_pin = ENP2611_GPIO_SDA, - .scl_pin = ENP2611_GPIO_SCL, -}; - -static struct platform_device enp2611_i2c_controller = { - .name = "IXP2000-I2C", - .id = 0, - .dev = { - .platform_data = &enp2611_i2c_gpio_pins - }, - .num_resources = 0 -}; - -static struct platform_device *enp2611_devices[] __initdata = { - &enp2611_flash, - &enp2611_i2c_controller -}; - -static void __init enp2611_init_machine(void) -{ - platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices)); - ixp2000_uart_init(); -} - - -MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .map_io = enp2611_map_io, - .init_irq = ixp2000_init_irq, - .timer = &enp2611_timer, - .init_machine = enp2611_init_machine, - .restart = ixp2000_restart, -MACHINE_END - - |
