diff options
Diffstat (limited to 'arch/arm/mach-integrator')
| -rw-r--r-- | arch/arm/mach-integrator/headsmp.S | 37 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/platsmp.c | 192 |
2 files changed, 229 insertions, 0 deletions
diff --git a/arch/arm/mach-integrator/headsmp.S b/arch/arm/mach-integrator/headsmp.S new file mode 100644 index 000000000000..ceaa88e30d70 --- /dev/null +++ b/arch/arm/mach-integrator/headsmp.S @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/mach-integrator/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Integrator specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(integrator_secondary_startup) + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + ldr r6, [r6, r4] +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long phys_pen_release diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c new file mode 100644 index 000000000000..ead15dfcb53d --- /dev/null +++ b/arch/arm/mach-integrator/platsmp.c @@ -0,0 +1,192 @@ +/* + * linux/arch/arm/mach-cintegrator/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/mm.h> + +#include <asm/atomic.h> +#include <asm/delay.h> +#include <asm/mmu_context.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> +#include <asm/smp.h> + +extern void integrator_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __initdata pen_release = -1; +unsigned long __initdata phys_pen_release = 0; + +static DEFINE_SPINLOCK(boot_lock); + +void __init platform_secondary_init(unsigned int cpu) +{ + /* + * the primary core may have used a "cross call" soft interrupt + * to get this processor out of WFI in the BootMonitor - make + * sure that we are no longer being sent this soft interrupt + */ + smp_cross_call_done(cpumask_of_cpu(cpu)); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + secondary_scan_irqs(); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __init boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu; + + /* + * XXX + * + * This is a later addition to the booting protocol: the + * bootMonitor now puts secondary cores into WFI, so + * poke_milo() no longer gets the cores moving; we need + * to send a soft interrupt to wake the secondary core. + * Use smp_cross_call() for this, since there's little + * point duplicating the code here + */ + smp_cross_call(cpumask_of_cpu(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init poke_milo(void) +{ + extern void secondary_startup(void); + + /* nobody is to be released from the pen yet */ + pen_release = -1; + + phys_pen_release = virt_to_phys(&pen_release); + + /* + * write the address of secondary startup into the system-wide + * flags register, then clear the bottom two bits, which is what + * BootMonitor is waiting for + */ +#if 1 +#define CINTEGRATOR_HDR_FLAGSS_OFFSET 0x30 + __raw_writel(virt_to_phys(integrator_secondary_startup), + (IO_ADDRESS(INTEGRATOR_HDR_BASE) + + CINTEGRATOR_HDR_FLAGSS_OFFSET)); +#define CINTEGRATOR_HDR_FLAGSC_OFFSET 0x34 + __raw_writel(3, + (IO_ADDRESS(INTEGRATOR_HDR_BASE) + + CINTEGRATOR_HDR_FLAGSC_OFFSET)); +#endif + + mb(); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "Integrator/CP: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "Integrator/CP: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + /* + * start with some more config for the Boot CPU, now that + * the world is a bit more alive (which was not the case + * when smp_prepare_boot_cpu() was called) + */ + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present mask - this tells us which CPUs should + * be present. + */ + for (i = 0; i < max_cpus; i++) { + cpu_set(i, cpu_present_mask); + } + + /* + * Do we need any more CPUs? If so, then let them know where + * to start. Note that, on modern versions of MILO, the "poke" + * doesn't actually do anything until each individual core is + * sent a soft interrupt to get it out of WFI + */ + if (max_cpus > 1) + poke_milo(); +} |
