summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-integrator/integrator_ap.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-integrator/integrator_ap.c')
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c166
1 files changed, 159 insertions, 7 deletions
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 8138a7e24562..227cf4d05088 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -27,9 +27,14 @@
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <asm/hardware/arm_timer.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/param.h> /* HZ */
@@ -43,8 +48,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include "common.h"
-
/*
* All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
* is the (PA >> 12).
@@ -55,7 +58,7 @@
#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE)
#define VA_SC_BASE IO_ADDRESS(INTEGRATOR_SC_BASE)
#define VA_EBI_BASE IO_ADDRESS(INTEGRATOR_EBI_BASE)
-#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_IC_OFFSET
+#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_IC)
/*
* Logical Physical
@@ -117,8 +120,8 @@ static struct map_desc ap_io_desc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+ .virtual = IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
@@ -334,14 +337,163 @@ static void __init ap_init(void)
}
}
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
+#else
+#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
+#endif
+
+static unsigned long timer_reload;
+
+static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
+
+static cycle_t timersp_read(struct clocksource *cs)
+{
+ return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
+}
+
+static struct clocksource clocksource_timersp = {
+ .name = "timer2",
+ .rating = 200,
+ .read = timersp_read,
+ .mask = CLOCKSOURCE_MASK(16),
+ .shift = 16,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void integrator_clocksource_init(u32 khz)
+{
+ struct clocksource *cs = &clocksource_timersp;
+ void __iomem *base = clksrc_base;
+ u32 ctrl = TIMER_CTRL_ENABLE;
+
+ if (khz >= 1500) {
+ khz /= 16;
+ ctrl = TIMER_CTRL_DIV16;
+ }
+
+ writel(ctrl, base + TIMER_CTRL);
+ writel(0xffff, base + TIMER_LOAD);
+
+ cs->mult = clocksource_khz2mult(khz, cs->shift);
+ clocksource_register(cs);
+}
+
+static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ /* clear the interrupt */
+ writel(1, clkevt_base + TIMER_INTCLR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
+{
+ u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
+
+ BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT);
+
+ if (mode == CLOCK_EVT_MODE_PERIODIC) {
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+ writel(timer_reload, clkevt_base + TIMER_LOAD);
+ ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+ }
+
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+}
+
+static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
+{
+ unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+
+ writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+ writel(next, clkevt_base + TIMER_LOAD);
+ writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+
+ return 0;
+}
+
+static struct clock_event_device integrator_clockevent = {
+ .name = "timer1",
+ .shift = 34,
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .set_mode = clkevt_set_mode,
+ .set_next_event = clkevt_set_next_event,
+ .rating = 300,
+ .cpumask = cpu_all_mask,
+};
+
+static struct irqaction integrator_timer_irq = {
+ .name = "timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = integrator_timer_interrupt,
+ .dev_id = &integrator_clockevent,
+};
+
+static void integrator_clockevent_init(u32 khz)
+{
+ struct clock_event_device *evt = &integrator_clockevent;
+ unsigned int ctrl = 0;
+
+ if (khz * 1000 > 0x100000 * HZ) {
+ khz /= 256;
+ ctrl |= TIMER_CTRL_DIV256;
+ } else if (khz * 1000 > 0x10000 * HZ) {
+ khz /= 16;
+ ctrl |= TIMER_CTRL_DIV16;
+ }
+
+ timer_reload = khz * 1000 / HZ;
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+
+ evt->irq = IRQ_TIMERINT1;
+ evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift);
+ evt->max_delta_ns = clockevent_delta2ns(0xffff, evt);
+ evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
+
+ setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
+ clockevents_register_device(evt);
+}
+
+/*
+ * Set up timer(s).
+ */
static void __init ap_init_timer(void)
{
- integrator_time_init(1000000 * TICKS_PER_uSEC / HZ, 0);
+ u32 khz = TICKS_PER_uSEC * 1000;
+
+ writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+
+ integrator_clocksource_init(khz);
+ integrator_clockevent_init(khz);
}
static struct sys_timer ap_timer = {
.init = ap_init_timer,
- .offset = integrator_gettimeoffset,
};
MACHINE_START(INTEGRATOR, "ARM-Integrator")
OpenPOWER on IntegriCloud