diff options
Diffstat (limited to 'arch/arm/mach-davinci/board-tnetv107x-evm.c')
| -rw-r--r-- | arch/arm/mach-davinci/board-tnetv107x-evm.c | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c new file mode 100644 index 000000000000..fe2a9d9c8bb7 --- /dev/null +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -0,0 +1,174 @@ +/* + * Texas Instruments TNETV107X EVM Board Support + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/ratelimit.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/irqs.h> +#include <mach/edma.h> +#include <mach/mux.h> +#include <mach/cp_intc.h> +#include <mach/tnetv107x.h> + +#define EVM_MMC_WP_GPIO 21 +#define EVM_MMC_CD_GPIO 24 + +static int initialize_gpio(int gpio, char *desc) +{ + int ret; + + ret = gpio_request(gpio, desc); + if (ret < 0) { + pr_err_ratelimited("cannot open %s gpio\n", desc); + return -ENOSYS; + } + gpio_direction_input(gpio); + return gpio; +} + +static int mmc_get_cd(int index) +{ + static int gpio; + + if (!gpio) + gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect"); + + if (gpio < 0) + return gpio; + + return gpio_get_value(gpio) ? 0 : 1; +} + +static int mmc_get_ro(int index) +{ + static int gpio; + + if (!gpio) + gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect"); + + if (gpio < 0) + return gpio; + + return gpio_get_value(gpio) ? 1 : 0; +} + +static struct davinci_mmc_config mmc_config = { + .get_cd = mmc_get_cd, + .get_ro = mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_1, +}; + +static const short sdio1_pins[] __initdata = { + TNETV107X_SDIO1_CLK_1, TNETV107X_SDIO1_CMD_1, + TNETV107X_SDIO1_DATA0_1, TNETV107X_SDIO1_DATA1_1, + TNETV107X_SDIO1_DATA2_1, TNETV107X_SDIO1_DATA3_1, + TNETV107X_GPIO21, TNETV107X_GPIO24, + -1 +}; + +static const short uart1_pins[] __initdata = { + TNETV107X_UART1_RD, TNETV107X_UART1_TD, + -1 +}; + +static struct mtd_partition nand_partitions[] = { + /* bootloader (U-Boot, etc) in first 12 sectors */ + { + .name = "bootloader", + .offset = 0, + .size = (12*SZ_128K), + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M, + .mask_flags = 0, + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; + +static struct davinci_nand_pdata nand_config = { + .mask_cle = 0x4000, + .mask_ale = 0x2000, + .parts = nand_partitions, + .nr_parts = ARRAY_SIZE(nand_partitions), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, + .ecc_bits = 1, +}; + +static struct davinci_uart_config serial_config __initconst = { + .enabled_uarts = BIT(1), +}; + +static struct tnetv107x_device_info evm_device_info __initconst = { + .serial_config = &serial_config, + .mmc_config[1] = &mmc_config, /* controller 1 */ + .nand_config[0] = &nand_config, /* chip select 0 */ +}; + +static __init void tnetv107x_evm_board_init(void) +{ + davinci_cfg_reg_list(sdio1_pins); + davinci_cfg_reg_list(uart1_pins); + + tnetv107x_devices_init(&evm_device_info); +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init tnetv107x_evm_console_init(void) +{ + return add_preferred_console("ttyS", 0, "115200"); +} +console_initcall(tnetv107x_evm_console_init); +#endif + +MACHINE_START(TNETV107X, "TNETV107X EVM") + .phys_io = TNETV107X_IO_BASE, + .io_pg_offst = (TNETV107X_IO_VIRT >> 18) & 0xfffc, + .boot_params = (TNETV107X_DDR_BASE + 0x100), + .map_io = tnetv107x_init, + .init_irq = cp_intc_init, + .timer = &davinci_timer, + .init_machine = tnetv107x_evm_board_init, +MACHINE_END |
