diff options
Diffstat (limited to 'arch/arm/mach-davinci/board-mityomapl138.c')
| -rw-r--r-- | arch/arm/mach-davinci/board-mityomapl138.c | 167 |
1 files changed, 159 insertions, 8 deletions
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 0bb5f0ce4fdc..2aa79c54f98e 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -17,6 +17,8 @@ #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/etherdevice.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -25,6 +27,7 @@ #include <mach/da8xx.h> #include <mach/nand.h> #include <mach/mux.h> +#include <mach/spi.h> #define MITYOMAPL138_PHY_ID "0:03" @@ -44,38 +47,109 @@ struct factory_config { static struct factory_config factory_config; +struct part_no_info { + const char *part_no; /* part number string of interest */ + int max_freq; /* khz */ +}; + +static struct part_no_info mityomapl138_pn_info[] = { + { + .part_no = "L138-C", + .max_freq = 300000, + }, + { + .part_no = "L138-D", + .max_freq = 375000, + }, + { + .part_no = "L138-F", + .max_freq = 456000, + }, + { + .part_no = "1808-C", + .max_freq = 300000, + }, + { + .part_no = "1808-D", + .max_freq = 375000, + }, + { + .part_no = "1808-F", + .max_freq = 456000, + }, + { + .part_no = "1810-D", + .max_freq = 375000, + }, +}; + +#ifdef CONFIG_CPU_FREQ +static void mityomapl138_cpufreq_init(const char *partnum) +{ + int i, ret; + + for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) { + /* + * the part number has additional characters beyond what is + * stored in the table. This information is not needed for + * determining the speed grade, and would require several + * more table entries. Only check the first N characters + * for a match. + */ + if (!strncmp(partnum, mityomapl138_pn_info[i].part_no, + strlen(mityomapl138_pn_info[i].part_no))) { + da850_max_speed = mityomapl138_pn_info[i].max_freq; + break; + } + } + + ret = da850_register_cpufreq("pll0_sysclk3"); + if (ret) + pr_warning("cpufreq registration failed: %d\n", ret); +} +#else +static void mityomapl138_cpufreq_init(const char *partnum) { } +#endif + static void read_factory_config(struct memory_accessor *a, void *context) { int ret; + const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); if (ret != sizeof(struct factory_config)) { pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n", ret); - return; + goto bad_config; } if (factory_config.magic != FACTORY_CONFIG_MAGIC) { pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n", factory_config.magic); - return; + goto bad_config; } if (factory_config.version != FACTORY_CONFIG_VERSION) { pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n", factory_config.version); - return; + goto bad_config; } pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac); - pr_info("MityOMAPL138: Part Number = %s\n", factory_config.partnum); if (is_valid_ether_addr(factory_config.mac)) memcpy(soc_info->emac_pdata->mac_addr, factory_config.mac, ETH_ALEN); else pr_warning("MityOMAPL138: Invalid MAC found " "in factory config block\n"); + + partnum = factory_config.partnum; + pr_info("MityOMAPL138: Part Number = %s\n", partnum); + +bad_config: + /* default maximum speed is valid for all platforms */ + mityomapl138_cpufreq_init(partnum); } static struct at24_platform_data mityomapl138_fd_chip = { @@ -223,6 +297,82 @@ static int __init pmic_tps65023_init(void) } /* + * SPI Devices: + * SPI1_CS0: 8M Flash ST-M25P64-VME6G + */ +static struct mtd_partition spi_flash_partitions[] = { + [0] = { + .name = "ubl", + .offset = 0, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "u-boot", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, + }, + [2] = { + .name = "u-boot-env", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [3] = { + .name = "periph-config", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [4] = { + .name = "reserved", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K + SZ_64K, + }, + [5] = { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M + SZ_1M, + }, + [6] = { + .name = "fpga", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + }, + [7] = { + .name = "spare", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data mityomapl138_spi_flash_data = { + .name = "m25p80", + .parts = spi_flash_partitions, + .nr_parts = ARRAY_SIZE(spi_flash_partitions), + .type = "m24p64", +}; + +static struct davinci_spi_config spi_eprom_config = { + .io_type = SPI_IO_TYPE_DMA, + .c2tdelay = 8, + .t2cdelay = 8, +}; + +static struct spi_board_info mityomapl138_spi_flash_info[] = { + { + .modalias = "m25p80", + .platform_data = &mityomapl138_spi_flash_data, + .controller_data = &spi_eprom_config, + .mode = SPI_MODE_0, + .max_speed_hz = 30000000, + .bus_num = 1, + .chip_select = 0, + }, +}; + +/* * MityDSP-L138 includes a 256 MByte large-page NAND flash * (128K blocks). */ @@ -377,16 +527,17 @@ static void __init mityomapl138_init(void) mityomapl138_setup_nand(); + ret = da8xx_register_spi(1, mityomapl138_spi_flash_info, + ARRAY_SIZE(mityomapl138_spi_flash_info)); + if (ret) + pr_warning("spi 1 registration failed: %d\n", ret); + mityomapl138_config_emac(); ret = da8xx_register_rtc(); if (ret) pr_warning("rtc setup failed: %d\n", ret); - ret = da850_register_cpufreq("pll0_sysclk3"); - if (ret) - pr_warning("cpufreq registration failed: %d\n", ret); - ret = da8xx_register_cpuidle(); if (ret) pr_warning("cpuidle registration failed: %d\n", ret); |
