diff options
Diffstat (limited to 'arch/arm/mach-at91/include')
-rw-r--r-- | arch/arm/mach-at91/include/mach/at91_pmc.h | 18 | ||||
-rw-r--r-- | arch/arm/mach-at91/include/mach/cpu.h | 20 | ||||
-rw-r--r-- | arch/arm/mach-at91/include/mach/sama5d3.h | 73 |
3 files changed, 107 insertions, 4 deletions
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index ea2c57a86ca6..31df12029c4e 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -75,6 +75,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ #define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff) +#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */ +#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f) #define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ #define AT91_PMC_USBDIV_1 (0 << 28) #define AT91_PMC_USBDIV_2 (1 << 28) @@ -167,11 +170,18 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ #define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ -#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */ +#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/ +#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */ +#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */ + +#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */ #define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ -#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */ -#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */ -#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV) +#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ +#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ +#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ +#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index b6504c19d55c..0f3379fe645f 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -36,6 +36,8 @@ #define ARCH_ID_AT91M40807 0x14080745 #define ARCH_ID_AT91R40008 0x44000840 +#define ARCH_ID_SAMA5D3 0x8A5C07C0 + #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9G46 0x00000003 @@ -47,6 +49,11 @@ #define ARCH_EXID_AT91SAM9G25 0x00000003 #define ARCH_EXID_AT91SAM9X25 0x00000004 +#define ARCH_EXID_SAMA5D31 0x00444300 +#define ARCH_EXID_SAMA5D33 0x00414300 +#define ARCH_EXID_SAMA5D34 0x00414301 +#define ARCH_EXID_SAMA5D35 0x00584300 + #define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 @@ -75,6 +82,9 @@ enum at91_soc_type { /* SAM9N12 */ AT91_SOC_SAM9N12, + /* SAMA5D3 */ + AT91_SOC_SAMA5D3, + /* Unknown type */ AT91_SOC_NONE }; @@ -93,6 +103,10 @@ enum at91_soc_subtype { AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35, AT91_SOC_SAM9G25, AT91_SOC_SAM9X25, + /* SAMA5D3 */ + AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34, + AT91_SOC_SAMA5D35, + /* Unknown subtype */ AT91_SOC_SUBTYPE_NONE }; @@ -187,6 +201,12 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91sam9n12() (0) #endif +#ifdef CONFIG_SOC_SAMA5D3 +#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3) +#else +#define cpu_is_sama5d3() (0) +#endif + /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h new file mode 100644 index 000000000000..6dc81ee38048 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -0,0 +1,73 @@ +/* + * Chip-specific header file for the SAMA5D3 family + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Common definitions. + * Based on SAMA5D3 datasheet. + * + * Licensed under GPLv2 or later. + */ + +#ifndef SAMA5D3_H +#define SAMA5D3_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */ +#define AT91_ID_PIT 3 /* PIT */ +#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */ +#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */ +#define SAMA5D3_ID_PIOA 6 /* PIOA */ +#define SAMA5D3_ID_PIOB 7 /* PIOB */ +#define SAMA5D3_ID_PIOC 8 /* PIOC */ +#define SAMA5D3_ID_PIOD 9 /* PIOD */ +#define SAMA5D3_ID_PIOE 10 /* PIOE */ +#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */ +#define SAMA5D3_ID_USART0 12 /* USART0 */ +#define SAMA5D3_ID_USART1 13 /* USART1 */ +#define SAMA5D3_ID_USART2 14 /* USART2 */ +#define SAMA5D3_ID_USART3 15 /* USART3 */ +#define SAMA5D3_ID_UART0 16 /* UART 0 */ +#define SAMA5D3_ID_UART1 17 /* UART 1 */ +#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */ +#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */ +#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */ +#define SAMA5D3_ID_HSMCI0 21 /* MCI */ +#define SAMA5D3_ID_HSMCI1 22 /* MCI */ +#define SAMA5D3_ID_HSMCI2 23 /* MCI */ +#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */ +#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */ +#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */ +#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */ +#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */ +#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */ +#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */ +#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */ +#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */ +#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */ +#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */ +#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */ +#define SAMA5D3_ID_LCDC 36 /* LCD Controller */ +#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */ +#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */ +#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */ +#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */ +#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */ +#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */ +#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */ +#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */ +#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */ +#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */ + +/* + * Internal Memory + */ +#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */ + +#endif |