diff options
Diffstat (limited to 'arch/arm/include')
-rw-r--r-- | arch/arm/include/asm/hardware/arm_timer.h | 39 | ||||
-rw-r--r-- | arch/arm/include/asm/hardware/cache-l2x0.h | 3 | ||||
-rw-r--r-- | arch/arm/include/asm/hardware/icst.h | 59 | ||||
-rw-r--r-- | arch/arm/include/asm/hardware/icst307.h | 38 | ||||
-rw-r--r-- | arch/arm/include/asm/hardware/icst525.h | 36 | ||||
-rw-r--r-- | arch/arm/include/asm/hardware/pl330.h | 217 | ||||
-rw-r--r-- | arch/arm/include/asm/hardware/sp810.h | 59 | ||||
-rw-r--r-- | arch/arm/include/asm/ioctls.h | 3 | ||||
-rw-r--r-- | arch/arm/include/asm/mach/pci.h | 11 | ||||
-rw-r--r-- | arch/arm/include/asm/mach/time.h | 2 | ||||
-rw-r--r-- | arch/arm/include/asm/pci.h | 15 | ||||
-rw-r--r-- | arch/arm/include/asm/perf_event.h | 17 | ||||
-rw-r--r-- | arch/arm/include/asm/pgtable.h | 2 | ||||
-rw-r--r-- | arch/arm/include/asm/pmu.h | 32 | ||||
-rw-r--r-- | arch/arm/include/asm/scatterlist.h | 20 | ||||
-rw-r--r-- | arch/arm/include/asm/smp.h | 2 | ||||
-rw-r--r-- | arch/arm/include/asm/system.h | 2 |
17 files changed, 431 insertions, 126 deletions
diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h index 04be3bdf46b8..c0f4e7bf22de 100644 --- a/arch/arm/include/asm/hardware/arm_timer.h +++ b/arch/arm/include/asm/hardware/arm_timer.h @@ -1,21 +1,30 @@ #ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H #define __ASM_ARM_HARDWARE_ARM_TIMER_H -#define TIMER_LOAD 0x00 -#define TIMER_VALUE 0x04 -#define TIMER_CTRL 0x08 -#define TIMER_CTRL_ONESHOT (1 << 0) -#define TIMER_CTRL_32BIT (1 << 1) -#define TIMER_CTRL_DIV1 (0 << 2) -#define TIMER_CTRL_DIV16 (1 << 2) -#define TIMER_CTRL_DIV256 (2 << 2) -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ -#define TIMER_CTRL_PERIODIC (1 << 6) -#define TIMER_CTRL_ENABLE (1 << 7) +/* + * ARM timer implementation, found in Integrator, Versatile and Realview + * platforms. Not all platforms support all registers and bits in these + * registers, so we mark them with A for Integrator AP, C for Integrator + * CP, V for Versatile and R for Realview. + * + * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview + * can have 16-bit or 32-bit selectable via a bit in the control register. + */ +#define TIMER_LOAD 0x00 /* ACVR rw */ +#define TIMER_VALUE 0x04 /* ACVR ro */ +#define TIMER_CTRL 0x08 /* ACVR rw */ +#define TIMER_CTRL_ONESHOT (1 << 0) /* CVR */ +#define TIMER_CTRL_32BIT (1 << 1) /* CVR */ +#define TIMER_CTRL_DIV1 (0 << 2) /* ACVR */ +#define TIMER_CTRL_DIV16 (1 << 2) /* ACVR */ +#define TIMER_CTRL_DIV256 (2 << 2) /* ACVR */ +#define TIMER_CTRL_IE (1 << 5) /* VR */ +#define TIMER_CTRL_PERIODIC (1 << 6) /* ACVR */ +#define TIMER_CTRL_ENABLE (1 << 7) /* ACVR */ -#define TIMER_INTCLR 0x0c -#define TIMER_RIS 0x10 -#define TIMER_MIS 0x14 -#define TIMER_BGLOAD 0x18 +#define TIMER_INTCLR 0x0c /* ACVR wo */ +#define TIMER_RIS 0x10 /* CVR ro */ +#define TIMER_MIS 0x14 /* CVR ro */ +#define TIMER_BGLOAD 0x18 /* CVR rw */ #endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index cdb9022716fd..6bcba48800fe 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -21,6 +21,9 @@ #define __ASM_ARM_HARDWARE_L2X0_H #define L2X0_CACHE_ID 0x000 +#define L2X0_CACHE_ID_PART_MASK (0xf << 6) +#define L2X0_CACHE_ID_PART_L210 (1 << 6) +#define L2X0_CACHE_ID_PART_L310 (3 << 6) #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 #define L2X0_AUX_CTRL 0x104 diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h new file mode 100644 index 000000000000..10382a3dcec9 --- /dev/null +++ b/arch/arm/include/asm/hardware/icst.h @@ -0,0 +1,59 @@ +/* + * arch/arm/include/asm/hardware/icst.h + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST + * clock generators. See http://www.icst.com/ for more information + * on these devices. + */ +#ifndef ASMARM_HARDWARE_ICST_H +#define ASMARM_HARDWARE_ICST_H + +struct icst_params { + unsigned long ref; + unsigned long vco_max; /* inclusive */ + unsigned long vco_min; /* exclusive */ + unsigned short vd_min; /* inclusive */ + unsigned short vd_max; /* inclusive */ + unsigned char rd_min; /* inclusive */ + unsigned char rd_max; /* inclusive */ + const unsigned char *s2div; /* chip specific s2div array */ + const unsigned char *idx2s; /* chip specific idx2s array */ +}; + +struct icst_vco { + unsigned short v; + unsigned char r; + unsigned char s; +}; + +unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco); +struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq); + +/* + * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V). + * This frequency is pre-output divider. + */ +#define ICST307_VCO_MIN 6000000 +#define ICST307_VCO_MAX 200000000 + +extern const unsigned char icst307_s2div[]; +extern const unsigned char icst307_idx2s[]; + +/* + * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V). + * This frequency is pre-output divider. + */ +#define ICST525_VCO_MIN 10000000 +#define ICST525_VCO_MAX_3V 200000000 +#define ICST525_VCO_MAX_5V 320000000 + +extern const unsigned char icst525_s2div[]; +extern const unsigned char icst525_idx2s[]; + +#endif diff --git a/arch/arm/include/asm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h deleted file mode 100644 index 554f128a1046..000000000000 --- a/arch/arm/include/asm/hardware/icst307.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/arm/include/asm/hardware/icst307.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICS307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This file is similar to the icst525.h file - */ -#ifndef ASMARM_HARDWARE_ICST307_H -#define ASMARM_HARDWARE_ICST307_H - -struct icst307_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst307_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco); -struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq); -struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period); - -#endif diff --git a/arch/arm/include/asm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h deleted file mode 100644 index 58f0dc43e2ed..000000000000 --- a/arch/arm/include/asm/hardware/icst525.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/include/asm/hardware/icst525.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#ifndef ASMARM_HARDWARE_ICST525_H -#define ASMARM_HARDWARE_ICST525_H - -struct icst525_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst525_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco); -struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq); -struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period); - -#endif diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h new file mode 100644 index 000000000000..575fa8186ca0 --- /dev/null +++ b/arch/arm/include/asm/hardware/pl330.h @@ -0,0 +1,217 @@ +/* linux/include/asm/hardware/pl330.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __PL330_CORE_H +#define __PL330_CORE_H + +#define PL330_MAX_CHAN 8 +#define PL330_MAX_IRQS 32 +#define PL330_MAX_PERI 32 + +enum pl330_srccachectrl { + SCCTRL0 = 0, /* Noncacheable and nonbufferable */ + SCCTRL1, /* Bufferable only */ + SCCTRL2, /* Cacheable, but do not allocate */ + SCCTRL3, /* Cacheable and bufferable, but do not allocate */ + SINVALID1, + SINVALID2, + SCCTRL6, /* Cacheable write-through, allocate on reads only */ + SCCTRL7, /* Cacheable write-back, allocate on reads only */ +}; + +enum pl330_dstcachectrl { + DCCTRL0 = 0, /* Noncacheable and nonbufferable */ + DCCTRL1, /* Bufferable only */ + DCCTRL2, /* Cacheable, but do not allocate */ + DCCTRL3, /* Cacheable and bufferable, but do not allocate */ + DINVALID1 = 8, + DINVALID2, + DCCTRL6, /* Cacheable write-through, allocate on writes only */ + DCCTRL7, /* Cacheable write-back, allocate on writes only */ +}; + +/* Populated by the PL330 core driver for DMA API driver's info */ +struct pl330_config { + u32 periph_id; + u32 pcell_id; +#define DMAC_MODE_NS (1 << 0) + unsigned int mode; + unsigned int data_bus_width:10; /* In number of bits */ + unsigned int data_buf_dep:10; + unsigned int num_chan:4; + unsigned int num_peri:6; + u32 peri_ns; + unsigned int num_events:6; + u32 irq_ns; +}; + +/* Handle to the DMAC provided to the PL330 core */ +struct pl330_info { + /* Owning device */ + struct device *dev; + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Client can freely use it. */ + void *client_data; + /* PL330 core data, Client must not touch it. */ + void *pl330_data; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + /* + * If the DMAC has some reset mechanism, then the + * client may want to provide pointer to the method. + */ + void (*dmac_reset)(struct pl330_info *pi); +}; + +enum pl330_byteswap { + SWAP_NO = 0, + SWAP_2, + SWAP_4, + SWAP_8, + SWAP_16, +}; + +/** + * Request Configuration. + * The PL330 core does not modify this and uses the last + * working configuration if the request doesn't provide any. + * + * The Client may want to provide this info only for the + * first request and a request with new settings. + */ +struct pl330_reqcfg { + /* Address Incrementing */ + unsigned dst_inc:1; + unsigned src_inc:1; + + /* + * For now, the SRC & DST protection levels + * and burst size/length are assumed same. + */ + bool nonsecure; + bool privileged; + bool insnaccess; + unsigned brst_len:5; + unsigned brst_size:3; /* in power of 2 */ + + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + enum pl330_byteswap swap; +}; + +/* + * One cycle of DMAC operation. + * There may be more than one xfer in a request. + */ +struct pl330_xfer { + u32 src_addr; + u32 dst_addr; + /* Size to xfer */ + u32 bytes; + /* + * Pointer to next xfer in the list. + * The last xfer in the req must point to NULL. + */ + struct pl330_xfer *next; +}; + +/* The xfer callbacks are made with one of these arguments. */ +enum pl330_op_err { + /* The all xfers in the request were success. */ + PL330_ERR_NONE, + /* If req aborted due to global error. */ + PL330_ERR_ABORT, + /* If req failed due to problem with Channel. */ + PL330_ERR_FAIL, +}; + +enum pl330_reqtype { + MEMTOMEM, + MEMTODEV, + DEVTOMEM, + DEVTODEV, +}; + +/* A request defining Scatter-Gather List ending with NULL xfer. */ +struct pl330_req { + enum pl330_reqtype rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Unique token for this xfer, set by the client. */ + void *token; + /* Callback to be called after xfer. */ + void (*xfer_cb)(void *token, enum pl330_op_err err); + /* If NULL, req will be done at last set parameters. */ + struct pl330_reqcfg *cfg; + /* Pointer to first xfer in the request. */ + struct pl330_xfer *x; +}; + +/* + * To know the status of the channel and DMAC, the client + * provides a pointer to this structure. The PL330 core + * fills it with current information. + */ +struct pl330_chanstatus { + /* + * If the DMAC engine halted due to some error, + * the client should remove-add DMAC. + */ + bool dmac_halted; + /* + * If channel is halted due to some error, + * the client should ABORT/FLUSH and START the channel. + */ + bool faulting; + /* Location of last load */ + u32 src_addr; + /* Location of last store */ + u32 dst_addr; + /* + * Pointer to the currently active req, NULL if channel is + * inactive, even though the requests may be present. + */ + struct pl330_req *top_req; + /* Pointer to req waiting second in the queue if any. */ + struct pl330_req *wait_req; +}; + +enum pl330_chan_op { + /* Start the channel */ + PL330_OP_START, + /* Abort the active xfer */ + PL330_OP_ABORT, + /* Stop xfer and flush queue */ + PL330_OP_FLUSH, +}; + +extern int pl330_add(struct pl330_info *); +extern void pl330_del(struct pl330_info *pi); +extern int pl330_update(const struct pl330_info *pi); +extern void pl330_release_channel(void *ch_id); +extern void *pl330_request_channel(const struct pl330_info *pi); +extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus); +extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op); +extern int pl330_submit_req(void *ch_id, struct pl330_req *r); + +#endif /* __PL330_CORE_H */ diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h new file mode 100644 index 000000000000..a101f10bb5b1 --- /dev/null +++ b/arch/arm/include/asm/hardware/sp810.h @@ -0,0 +1,59 @@ +/* + * arch/arm/include/asm/hardware/sp810.h + * + * ARM PrimeXsys System Controller SP810 header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARM_SP810_H +#define __ASM_ARM_SP810_H + +#include <linux/io.h> + +/* sysctl registers offset */ +#define SCCTRL 0x000 +#define SCSYSSTAT 0x004 +#define SCIMCTRL 0x008 +#define SCIMSTAT 0x00C +#define SCXTALCTRL 0x010 +#define SCPLLCTRL 0x014 +#define SCPLLFCTRL 0x018 +#define SCPERCTRL0 0x01C +#define SCPERCTRL1 0x020 +#define SCPEREN 0x024 +#define SCPERDIS 0x028 +#define SCPERCLKEN 0x02C +#define SCPERSTAT 0x030 +#define SCSYSID0 0xEE0 +#define SCSYSID1 0xEE4 +#define SCSYSID2 0xEE8 +#define SCSYSID3 0xEEC +#define SCITCR 0xF00 +#define SCITIR0 0xF04 +#define SCITIR1 0xF08 +#define SCITOR 0xF0C +#define SCCNTCTRL 0xF10 +#define SCCNTDATA 0xF14 +#define SCCNTSTEP 0xF18 +#define SCPERIPHID0 0xFE0 +#define SCPERIPHID1 0xFE4 +#define SCPERIPHID2 0xFE8 +#define SCPERIPHID3 0xFEC +#define SCPCELLID0 0xFF0 +#define SCPCELLID1 0xFF4 +#define SCPCELLID2 0xFF8 +#define SCPCELLID3 0xFFC + +static inline void sysctl_soft_reset(void __iomem *base) +{ + /* writing any value to SCSYSSTAT reg will reset system */ + writel(0, base + SCSYSSTAT); +} + +#endif /* __ASM_ARM_SP810_H */ diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h index a91d8a1523cf..7f0b6d13296a 100644 --- a/arch/arm/include/asm/ioctls.h +++ b/arch/arm/include/asm/ioctls.h @@ -53,6 +53,9 @@ #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCGRS485 0x542E +#define TIOCSRS485 0x542F + #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 #define FIOASYNC 0x5452 diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index a38bdc7afa34..52f0da1e97df 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -8,10 +8,16 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_MACH_PCI_H +#define __ASM_MACH_PCI_H + struct pci_sys_data; struct pci_bus; struct hw_pci { +#ifdef CONFIG_PCI_DOMAINS + int domain; +#endif struct list_head buses; int nr_controllers; int (*setup)(int nr, struct pci_sys_data *); @@ -26,6 +32,9 @@ struct hw_pci { * Per-controller structure */ struct pci_sys_data { +#ifdef CONFIG_PCI_DOMAINS + int domain; +#endif struct list_head node; int busnr; /* primary bus number */ u64 mem_offset; /* bus->cpu memory mapping offset */ @@ -70,3 +79,5 @@ extern int pci_v3_setup(int nr, struct pci_sys_data *); extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *); extern void pci_v3_preinit(void); extern void pci_v3_postinit(void); + +#endif /* __ASM_MACH_PCI_H */ diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index 8bffc3ff3acf..35d408f6dccf 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -38,7 +38,7 @@ struct sys_timer { void (*init)(void); void (*suspend)(void); void (*resume)(void); -#ifndef CONFIG_GENERIC_TIME +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET unsigned long (*offset)(void); #endif }; diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 47980118d0a5..92e2a833693d 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -4,8 +4,23 @@ #ifdef __KERNEL__ #include <asm-generic/pci-dma-compat.h> +#include <asm/mach/pci.h> /* for pci_sys_data */ #include <mach/hardware.h> /* for PCIBIOS_MIN_* */ +#ifdef CONFIG_PCI_DOMAINS +static inline int pci_domain_nr(struct pci_bus *bus) +{ + struct pci_sys_data *root = bus->sysdata; + + return root->domain; +} + +static inline int pci_proc_domain(struct pci_bus *bus) +{ + return pci_domain_nr(bus); +} +#endif /* CONFIG_PCI_DOMAINS */ + #ifdef CONFIG_PCI_HOST_ITE8152 /* ITE bridge requires setting latency timer to avoid early bus access termination by PIC bus mater devices diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 49e3049aba32..48837e6d8887 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -28,4 +28,21 @@ set_perf_event_pending(void) * same indexes here for consistency. */ #define PERF_EVENT_INDEX_OFFSET 1 +/* ARM perf PMU IDs for use by internal perf clients. */ +enum arm_perf_pmu_ids { + ARM_PERF_PMU_ID_XSCALE1 = 0, + ARM_PERF_PMU_ID_XSCALE2, + ARM_PERF_PMU_ID_V6, + ARM_PERF_PMU_ID_V6MP, + ARM_PERF_PMU_ID_CA8, + ARM_PERF_PMU_ID_CA9, + ARM_NUM_PMU_IDS, +}; + +extern enum arm_perf_pmu_ids +armpmu_get_pmu_id(void); + +extern int +armpmu_get_max_events(void); + #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 11397687f42c..ab68cf1ef80f 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -314,7 +314,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED) #define pgprot_writecombine(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE) -#if __LINUX_ARM_ARCH__ >= 7 +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE) #else diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 2829b9f981a1..8ccea012722c 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -12,33 +12,33 @@ #ifndef __ARM_PMU_H__ #define __ARM_PMU_H__ -#ifdef CONFIG_CPU_HAS_PMU - -struct pmu_irqs { - const int *irqs; - int num_irqs; +enum arm_pmu_type { + ARM_PMU_DEVICE_CPU = 0, + ARM_NUM_PMU_DEVICES, }; +#ifdef CONFIG_CPU_HAS_PMU + /** * reserve_pmu() - reserve the hardware performance counters * * Reserve the hardware performance counters in the system for exclusive use. - * The 'struct pmu_irqs' for the system is returned on success, ERR_PTR() + * The platform_device for the system is returned on success, ERR_PTR() * encoded error on failure. */ -extern const struct pmu_irqs * -reserve_pmu(void); +extern struct platform_device * +reserve_pmu(enum arm_pmu_type device); /** * release_pmu() - Relinquish control of the performance counters * * Release the performance counters and allow someone else to use them. * Callers must have disabled the counters and released IRQs before calling - * this. The 'struct pmu_irqs' returned from reserve_pmu() must be passed as + * this. The platform_device returned from reserve_pmu() must be passed as * a cookie. */ extern int -release_pmu(const struct pmu_irqs *irqs); +release_pmu(struct platform_device *pdev); /** * init_pmu() - Initialise the PMU. @@ -48,24 +48,26 @@ release_pmu(const struct pmu_irqs *irqs); * the actual hardware initialisation. */ extern int -init_pmu(void); +init_pmu(enum arm_pmu_type device); #else /* CONFIG_CPU_HAS_PMU */ -static inline const struct pmu_irqs * -reserve_pmu(void) +#include <linux/err.h> + +static inline struct platform_device * +reserve_pmu(enum arm_pmu_type device) { return ERR_PTR(-ENODEV); } static inline int -release_pmu(const struct pmu_irqs *irqs) +release_pmu(struct platform_device *pdev) { return -ENODEV; } static inline int -init_pmu(void) +init_pmu(enum arm_pmu_type device) { return -ENODEV; } diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h index ca0a37d03400..bcda59f39941 100644 --- a/arch/arm/include/asm/scatterlist.h +++ b/arch/arm/include/asm/scatterlist.h @@ -4,24 +4,8 @@ #include <asm/memory.h> #include <asm/types.h> -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* buffer offset */ - dma_addr_t dma_address; /* dma address */ - unsigned int length; /* length */ -}; +#include <asm-generic/scatterlist.h> -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#undef ARCH_HAS_SG_CHAIN #endif /* _ASMARM_SCATTERLIST_H */ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index e0d763be1846..3d05190797cb 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -82,7 +82,7 @@ struct secondary_data { extern struct secondary_data secondary_data; extern int __cpu_disable(void); -extern int mach_cpu_disable(unsigned int cpu); +extern int platform_cpu_disable(unsigned int cpu); extern void __cpu_die(unsigned int cpu); extern void cpu_die(void); diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 4ace45ec3ef8..5f4f48002734 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -141,7 +141,7 @@ extern unsigned int user_debug; #ifdef CONFIG_ARCH_HAS_BARRIERS #include <mach/barriers.h> -#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) +#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) #define mb() do { dsb(); outer_sync(); } while (0) #define rmb() dmb() #define wmb() mb() |