diff options
Diffstat (limited to 'arch/arm/include/asm')
| -rw-r--r-- | arch/arm/include/asm/hardware/pl330.h | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h new file mode 100644 index 000000000000..575fa8186ca0 --- /dev/null +++ b/arch/arm/include/asm/hardware/pl330.h @@ -0,0 +1,217 @@ +/* linux/include/asm/hardware/pl330.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __PL330_CORE_H +#define __PL330_CORE_H + +#define PL330_MAX_CHAN 8 +#define PL330_MAX_IRQS 32 +#define PL330_MAX_PERI 32 + +enum pl330_srccachectrl { + SCCTRL0 = 0, /* Noncacheable and nonbufferable */ + SCCTRL1, /* Bufferable only */ + SCCTRL2, /* Cacheable, but do not allocate */ + SCCTRL3, /* Cacheable and bufferable, but do not allocate */ + SINVALID1, + SINVALID2, + SCCTRL6, /* Cacheable write-through, allocate on reads only */ + SCCTRL7, /* Cacheable write-back, allocate on reads only */ +}; + +enum pl330_dstcachectrl { + DCCTRL0 = 0, /* Noncacheable and nonbufferable */ + DCCTRL1, /* Bufferable only */ + DCCTRL2, /* Cacheable, but do not allocate */ + DCCTRL3, /* Cacheable and bufferable, but do not allocate */ + DINVALID1 = 8, + DINVALID2, + DCCTRL6, /* Cacheable write-through, allocate on writes only */ + DCCTRL7, /* Cacheable write-back, allocate on writes only */ +}; + +/* Populated by the PL330 core driver for DMA API driver's info */ +struct pl330_config { + u32 periph_id; + u32 pcell_id; +#define DMAC_MODE_NS (1 << 0) + unsigned int mode; + unsigned int data_bus_width:10; /* In number of bits */ + unsigned int data_buf_dep:10; + unsigned int num_chan:4; + unsigned int num_peri:6; + u32 peri_ns; + unsigned int num_events:6; + u32 irq_ns; +}; + +/* Handle to the DMAC provided to the PL330 core */ +struct pl330_info { + /* Owning device */ + struct device *dev; + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Client can freely use it. */ + void *client_data; + /* PL330 core data, Client must not touch it. */ + void *pl330_data; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + /* + * If the DMAC has some reset mechanism, then the + * client may want to provide pointer to the method. + */ + void (*dmac_reset)(struct pl330_info *pi); +}; + +enum pl330_byteswap { + SWAP_NO = 0, + SWAP_2, + SWAP_4, + SWAP_8, + SWAP_16, +}; + +/** + * Request Configuration. + * The PL330 core does not modify this and uses the last + * working configuration if the request doesn't provide any. + * + * The Client may want to provide this info only for the + * first request and a request with new settings. + */ +struct pl330_reqcfg { + /* Address Incrementing */ + unsigned dst_inc:1; + unsigned src_inc:1; + + /* + * For now, the SRC & DST protection levels + * and burst size/length are assumed same. + */ + bool nonsecure; + bool privileged; + bool insnaccess; + unsigned brst_len:5; + unsigned brst_size:3; /* in power of 2 */ + + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + enum pl330_byteswap swap; +}; + +/* + * One cycle of DMAC operation. + * There may be more than one xfer in a request. + */ +struct pl330_xfer { + u32 src_addr; + u32 dst_addr; + /* Size to xfer */ + u32 bytes; + /* + * Pointer to next xfer in the list. + * The last xfer in the req must point to NULL. + */ + struct pl330_xfer *next; +}; + +/* The xfer callbacks are made with one of these arguments. */ +enum pl330_op_err { + /* The all xfers in the request were success. */ + PL330_ERR_NONE, + /* If req aborted due to global error. */ + PL330_ERR_ABORT, + /* If req failed due to problem with Channel. */ + PL330_ERR_FAIL, +}; + +enum pl330_reqtype { + MEMTOMEM, + MEMTODEV, + DEVTOMEM, + DEVTODEV, +}; + +/* A request defining Scatter-Gather List ending with NULL xfer. */ +struct pl330_req { + enum pl330_reqtype rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Unique token for this xfer, set by the client. */ + void *token; + /* Callback to be called after xfer. */ + void (*xfer_cb)(void *token, enum pl330_op_err err); + /* If NULL, req will be done at last set parameters. */ + struct pl330_reqcfg *cfg; + /* Pointer to first xfer in the request. */ + struct pl330_xfer *x; +}; + +/* + * To know the status of the channel and DMAC, the client + * provides a pointer to this structure. The PL330 core + * fills it with current information. + */ +struct pl330_chanstatus { + /* + * If the DMAC engine halted due to some error, + * the client should remove-add DMAC. + */ + bool dmac_halted; + /* + * If channel is halted due to some error, + * the client should ABORT/FLUSH and START the channel. + */ + bool faulting; + /* Location of last load */ + u32 src_addr; + /* Location of last store */ + u32 dst_addr; + /* + * Pointer to the currently active req, NULL if channel is + * inactive, even though the requests may be present. + */ + struct pl330_req *top_req; + /* Pointer to req waiting second in the queue if any. */ + struct pl330_req *wait_req; +}; + +enum pl330_chan_op { + /* Start the channel */ + PL330_OP_START, + /* Abort the active xfer */ + PL330_OP_ABORT, + /* Stop xfer and flush queue */ + PL330_OP_FLUSH, +}; + +extern int pl330_add(struct pl330_info *); +extern void pl330_del(struct pl330_info *pi); +extern int pl330_update(const struct pl330_info *pi); +extern void pl330_release_channel(void *ch_id); +extern void *pl330_request_channel(const struct pl330_info *pi); +extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus); +extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op); +extern int pl330_submit_req(void *ch_id, struct pl330_req *r); + +#endif /* __PL330_CORE_H */ |
