summaryrefslogtreecommitdiffstats
path: root/arch/arm/common
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/common')
-rw-r--r--arch/arm/common/Makefile1
-rw-r--r--arch/arm/common/pl330.c4
-rw-r--r--arch/arm/common/timer-sp.c82
-rw-r--r--arch/arm/common/vic.c69
4 files changed, 78 insertions, 78 deletions
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e7521bca2c35..6ea9b6f3607a 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -16,5 +16,4 @@ obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_ARCH_IXP2000) += uengine.o
obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
-obj-$(CONFIG_COMMON_CLKDEV) += clkdev.o
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 8f0f86db3602..97912fa48782 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[],
unsigned lcnt0, lcnt1, ljmp0, ljmp1;
struct _arg_LPEND lpend;
- /* Max iterations possibile in DMALP is 256 */
+ /* Max iterations possible in DMALP is 256 */
if (*bursts >= 256*256) {
lcnt1 = 256;
lcnt0 = 256;
@@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi)
}
for (ev = 0; ev < pi->pcfg.num_events; ev++) {
- if (val & (1 << ev)) { /* Event occured */
+ if (val & (1 << ev)) { /* Event occurred */
struct pl330_thread *thrd;
u32 inten = readl(regs + INTEN);
int active;
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 6ef3342153b9..41df47875122 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -18,53 +18,67 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/clk.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/arm_timer.h>
-/*
- * These timers are currently always setup to be clocked at 1MHz.
- */
-#define TIMER_FREQ_KHZ (1000)
-#define TIMER_RELOAD (TIMER_FREQ_KHZ * 1000 / HZ)
+static long __init sp804_get_clock_rate(const char *name)
+{
+ struct clk *clk;
+ long rate;
+ int err;
+
+ clk = clk_get_sys("sp804", name);
+ if (IS_ERR(clk)) {
+ pr_err("sp804: %s clock not found: %d\n", name,
+ (int)PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
-static void __iomem *clksrc_base;
+ err = clk_enable(clk);
+ if (err) {
+ pr_err("sp804: %s clock failed to enable: %d\n", name, err);
+ clk_put(clk);
+ return err;
+ }
-static cycle_t sp804_read(struct clocksource *cs)
-{
- return ~readl(clksrc_base + TIMER_VALUE);
-}
+ rate = clk_get_rate(clk);
+ if (rate < 0) {
+ pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
+ clk_disable(clk);
+ clk_put(clk);
+ }
-static struct clocksource clocksource_sp804 = {
- .name = "timer3",
- .rating = 200,
- .read = sp804_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
+ return rate;
+}
-void __init sp804_clocksource_init(void __iomem *base)
+void __init sp804_clocksource_init(void __iomem *base, const char *name)
{
- struct clocksource *cs = &clocksource_sp804;
+ long rate = sp804_get_clock_rate(name);
- clksrc_base = base;
+ if (rate < 0)
+ return;
/* setup timer 0 as free-running clocksource */
- writel(0, clksrc_base + TIMER_CTRL);
- writel(0xffffffff, clksrc_base + TIMER_LOAD);
- writel(0xffffffff, clksrc_base + TIMER_VALUE);
+ writel(0, base + TIMER_CTRL);
+ writel(0xffffffff, base + TIMER_LOAD);
+ writel(0xffffffff, base + TIMER_VALUE);
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
- clksrc_base + TIMER_CTRL);
+ base + TIMER_CTRL);
- clocksource_register_khz(cs, TIMER_FREQ_KHZ);
+ clocksource_mmio_init(base + TIMER_VALUE, name,
+ rate, 200, 32, clocksource_mmio_readl_down);
}
static void __iomem *clkevt_base;
+static unsigned long clkevt_reload;
/*
* IRQ handler for the timer
@@ -90,7 +104,7 @@ static void sp804_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD);
+ writel(clkevt_reload, clkevt_base + TIMER_LOAD);
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
break;
@@ -120,7 +134,6 @@ static int sp804_set_next_event(unsigned long next,
}
static struct clock_event_device sp804_clockevent = {
- .name = "timer0",
.shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sp804_set_mode,
@@ -136,17 +149,24 @@ static struct irqaction sp804_timer_irq = {
.dev_id = &sp804_clockevent,
};
-void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq)
+void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
+ const char *name)
{
struct clock_event_device *evt = &sp804_clockevent;
+ long rate = sp804_get_clock_rate(name);
+
+ if (rate < 0)
+ return;
clkevt_base = base;
+ clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
- evt->irq = timer_irq;
- evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift);
+ evt->name = name;
+ evt->irq = irq;
+ evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
- setup_irq(timer_irq, &sp804_timer_irq);
+ setup_irq(irq, &sp804_timer_irq);
clockevents_register_device(evt);
}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 113085a77123..7aa4262ada7a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,17 +22,16 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-#if defined(CONFIG_PM)
+#ifdef CONFIG_PM
/**
* struct vic_device - VIC PM device
- * @sysdev: The system device which is registered.
* @irq: The IRQ number for the base of the VIC.
* @base: The register base for the VIC.
* @resume_sources: A bitmask of interrupts for resume.
@@ -43,8 +42,6 @@
* @protect: Save for VIC_PROTECT.
*/
struct vic_device {
- struct sys_device sysdev;
-
void __iomem *base;
int irq;
u32 resume_sources;
@@ -59,11 +56,6 @@ struct vic_device {
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static int vic_id;
-
-static inline struct vic_device *to_vic(struct sys_device *sys)
-{
- return container_of(sys, struct vic_device, sysdev);
-}
#endif /* CONFIG_PM */
/**
@@ -85,10 +77,9 @@ static void vic_init2(void __iomem *base)
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
-#if defined(CONFIG_PM)
-static int vic_class_resume(struct sys_device *dev)
+#ifdef CONFIG_PM
+static void resume_one_vic(struct vic_device *vic)
{
- struct vic_device *vic = to_vic(dev);
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
@@ -107,13 +98,18 @@ static int vic_class_resume(struct sys_device *dev)
writel(vic->soft_int, base + VIC_INT_SOFT);
writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+}
- return 0;
+static void vic_resume(void)
+{
+ int id;
+
+ for (id = vic_id - 1; id >= 0; id--)
+ resume_one_vic(vic_devices + id);
}
-static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+static void suspend_one_vic(struct vic_device *vic)
{
- struct vic_device *vic = to_vic(dev);
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
@@ -128,14 +124,21 @@ static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
writel(vic->resume_irqs, base + VIC_INT_ENABLE);
writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static int vic_suspend(void)
+{
+ int id;
+
+ for (id = 0; id < vic_id; id++)
+ suspend_one_vic(vic_devices + id);
return 0;
}
-struct sysdev_class vic_class = {
- .name = "vic",
- .suspend = vic_class_suspend,
- .resume = vic_class_resume,
+struct syscore_ops vic_syscore_ops = {
+ .suspend = vic_suspend,
+ .resume = vic_resume,
};
/**
@@ -147,30 +150,8 @@ struct sysdev_class vic_class = {
*/
static int __init vic_pm_init(void)
{
- struct vic_device *dev = vic_devices;
- int err;
- int id;
-
- if (vic_id == 0)
- return 0;
-
- err = sysdev_class_register(&vic_class);
- if (err) {
- printk(KERN_ERR "%s: cannot register class\n", __func__);
- return err;
- }
-
- for (id = 0; id < vic_id; id++, dev++) {
- dev->sysdev.id = id;
- dev->sysdev.cls = &vic_class;
-
- err = sysdev_register(&dev->sysdev);
- if (err) {
- printk(KERN_ERR "%s: failed to register device\n",
- __func__);
- return err;
- }
- }
+ if (vic_id > 0)
+ register_syscore_ops(&vic_syscore_ops);
return 0;
}
OpenPOWER on IntegriCloud