diff options
Diffstat (limited to 'arch/arm/boot')
222 files changed, 5972 insertions, 1560 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0a65a7f86c8c..7edcf006b739 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -603,6 +603,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ + qcom-msm8974-lge-nexus5-hammerhead.dtb \ qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb \ @@ -653,6 +654,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ + r7s72100-rskrza1.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ @@ -661,6 +663,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r8a7791-koelsch.dtb \ r8a7791-porter.dtb \ r8a7792-blanche.dtb \ + r8a7792-wheat.dtb \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ @@ -688,6 +691,7 @@ dtb-$(CONFIG_ARCH_SPEAR6XX) += \ dtb-$(CONFIG_ARCH_STI) += \ stih407-b2120.dtb \ stih410-b2120.dtb \ + stih410-b2260.dtb \ stih415-b2000.dtb \ stih415-b2020.dtb \ stih416-b2000.dtb \ @@ -729,6 +733,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-wobo-i5.dtb \ sun5i-a13-difrnce-dit4350.dtb \ sun5i-a13-empire-electronix-d709.dtb \ + sun5i-a13-empire-electronix-m712.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \ @@ -745,6 +750,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-mele-a1000g-quad.dtb \ sun6i-a31s-colorfly-e708-q1.dtb \ sun6i-a31s-cs908.dtb \ + sun6i-a31s-inet-q972.dtb \ sun6i-a31s-primo81.dtb \ sun6i-a31s-sina31s.dtb \ sun6i-a31s-sinovoip-bpi-m2.dtb \ @@ -784,16 +790,22 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-q8-tablet.dtb \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ + sun8i-a33-inet-d978-rev2.dtb \ sun8i-a33-ippo-q8h-v1.2.dtb \ + sun8i-a33-olinuxino.dtb \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-nanopi-neo.dtb \ sun8i-h3-orangepi-2.dtb \ + sun8i-h3-orangepi-lite.dtb \ sun8i-h3-orangepi-one.dtb \ sun8i-h3-orangepi-pc.dtb \ + sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ + sun8i-h3-orangepi-plus2e.dtb \ sun8i-r16-parrot.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ @@ -838,15 +850,15 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-ccu8540.dtb \ ste-ccu9540.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ - uniphier-ph1-ld4-ref.dtb \ - uniphier-ph1-ld6b-ref.dtb \ - uniphier-ph1-pro4-ace.dtb \ - uniphier-ph1-pro4-ref.dtb \ - uniphier-ph1-pro4-sanji.dtb \ - uniphier-ph1-sld3-ref.dtb \ - uniphier-ph1-sld8-ref.dtb \ - uniphier-proxstream2-gentil.dtb \ - uniphier-proxstream2-vodka.dtb + uniphier-ld4-ref.dtb \ + uniphier-ld6b-ref.dtb \ + uniphier-pro4-ace.dtb \ + uniphier-pro4-ref.dtb \ + uniphier-pro4-sanji.dtb \ + uniphier-pxs2-gentil.dtb \ + uniphier-pxs2-vodka.dtb \ + uniphier-sld3-ref.dtb \ + uniphier-sld8-ref.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ versatile-pb.dtb diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index c8609d8d2c55..dd45d172a892 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -24,12 +24,12 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -37,7 +37,7 @@ regulator-boot-on; }; - wl12xx_vmmc: fixedregulator@2 { + wl12xx_vmmc: fixedregulator2 { pinctrl-names = "default"; pinctrl-0 = <&wl12xx_gpio>; compatible = "regulator-fixed"; @@ -226,7 +226,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; }; }; diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 58a05f7d0b7c..c2bee452dab8 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -29,13 +29,13 @@ compatible = "gpio-leds"; - led@0 { + led0 { label = "base:red:user"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ default-state = "off"; }; - led@1 { + led1 { label = "base:green:user"; gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ default-state = "off"; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index e247c15e5176..007b5e5a51a9 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -13,7 +13,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; @@ -28,28 +28,28 @@ compatible = "gpio-leds"; - led@2 { + led2 { label = "beaglebone:green:heartbeat"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; - led@3 { + led3 { label = "beaglebone:green:mmc0"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@4 { + led4 { label = "beaglebone:green:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@5 { + led5 { label = "beaglebone:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc1"; @@ -57,7 +57,7 @@ }; }; - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index 1d647358f1c1..f9ee5859c154 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -19,7 +19,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 817b1dec0683..947c81b7aaaf 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -17,7 +17,7 @@ model = "CompuLab CM-T335"; compatible = "compulab,cm-t335", "ti,am33xx"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; @@ -26,7 +26,7 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&gpio_led_pins>; - led@0 { + led0 { label = "cm_t335:green"; gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */ linux,default-trigger = "heartbeat"; @@ -34,7 +34,7 @@ }; /* regulator for mmc */ - vmmc_fixed: fixedregulator@0 { + vmmc_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmc_fixed"; regulator-min-microvolt = <3300000>; @@ -42,7 +42,7 @@ }; /* Regulator for WiFi */ - vwlan_fixed: fixedregulator@2 { + vwlan_fixed: fixedregulator2 { compatible = "regulator-fixed"; regulator-name = "vwlan_fixed"; gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */ diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 5d28712ad253..3cf896a2a204 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -20,12 +20,12 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -33,13 +33,13 @@ regulator-boot-on; }; - lis3_reg: fixedregulator@1 { + lis3_reg: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "lis3_reg"; regulator-boot-on; }; - wlan_en_reg: fixedregulator@2 { + wlan_en_reg: fixedregulator2 { compatible = "regulator-fixed"; regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; @@ -53,7 +53,7 @@ enable-active-high; }; - matrix_keypad: matrix_keypad@0 { + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; col-scan-delay-us = <2>; @@ -73,20 +73,20 @@ 0x0201006c>; /* DOWN */ }; - gpio_keys: volume_keys@0 { + gpio_keys: volume_keys0 { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; autorepeat; - switch@9 { + switch9 { label = "volume-up"; linux,code = <115>; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; wakeup-source; }; - switch@10 { + switch10 { label = "volume-down"; linux,code = <114>; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 09308d66645b..0e5e8dcdcc24 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -27,12 +27,12 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -40,13 +40,13 @@ regulator-boot-on; }; - lis3_reg: fixedregulator@1 { + lis3_reg: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "lis3_reg"; regulator-boot-on; }; - wl12xx_vmmc: fixedregulator@2 { + wl12xx_vmmc: fixedregulator2 { pinctrl-names = "default"; pinctrl-0 = <&wl12xx_gpio>; compatible = "regulator-fixed"; @@ -58,7 +58,7 @@ enable-active-high; }; - vtt_fixed: fixedregulator@3 { + vtt_fixed: fixedregulator3 { compatible = "regulator-fixed"; regulator-name = "vtt"; regulator-min-microvolt = <1500000>; @@ -75,26 +75,26 @@ compatible = "gpio-leds"; - led@1 { + led1 { label = "evmsk:green:usr0"; gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led2 { label = "evmsk:green:usr1"; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led3 { label = "evmsk:green:mmc0"; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@4 { + led4 { label = "evmsk:green:heartbeat"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -102,31 +102,31 @@ }; }; - gpio_buttons: gpio_buttons@0 { + gpio_buttons: gpio_buttons0 { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - switch@1 { + switch1 { label = "button0"; linux,code = <0x100>; gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; }; - switch@2 { + switch2 { label = "button1"; linux,code = <0x101>; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; }; - switch@3 { + switch3 { label = "button2"; linux,code = <0x102>; gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; wakeup-source; }; - switch@4 { + switch4 { label = "button3"; linux,code = <0x103>; gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 7d8b8fefdf08..85e04c205542 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -19,12 +19,12 @@ model = "TI AM3359 ICE-V2"; compatible = "ti,am3359-icev2", "ti,am33xx"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -32,7 +32,7 @@ regulator-boot-on; }; - vtt_fixed: fixedregulator@1 { + vtt_fixed: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "vtt"; regulator-min-microvolt = <1500000>; @@ -43,52 +43,52 @@ enable-active-high; }; - leds@0 { + leds0 { compatible = "gpio-leds"; - led@0 { + led0 { label = "out0"; gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@1 { + led1 { label = "out1"; gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led2 { label = "out2"; gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led3 { label = "out3"; gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@4 { + led4 { label = "out4"; gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@5 { + led5 { label = "out5"; gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@6 { + led6 { label = "out6"; gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@7 { + led7 { label = "out7"; gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -96,49 +96,58 @@ }; /* Tricolor status LEDs */ - leds@1 { + leds1 { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds>; - led@0 { + led0 { label = "status0:red:cpu0"; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "cpu0"; }; - led@1 { + led1 { label = "status0:green:usr"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led2 { label = "status0:yellow:usr"; gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led3 { label = "status1:red:mmc0"; gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "mmc0"; }; - led@4 { + led4 { label = "status1:green:usr"; gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@5 { + led5 { label = "status1:yellow:usr"; gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; + gpio-decoder { + compatible = "gpio-decoder"; + gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>, + <&pca9536 2 GPIO_ACTIVE_HIGH>, + <&pca9536 1 GPIO_ACTIVE_HIGH>, + <&pca9536 0 GPIO_ACTIVE_HIGH>; + linux,axis = <0>; /* ABS_X */ + decoder-max-value = <9>; + }; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index df63484ef9b3..a5769a8f5fc8 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -20,7 +20,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; @@ -31,14 +31,14 @@ compatible = "gpio-leds"; - led@0 { + led0 { label = "com:green:user"; gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -46,7 +46,7 @@ regulator-boot-on; }; - vmmc: fixedregulator@0 { + vmmc: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "vmmc"; regulator-min-microvolt = <3300000>; @@ -161,7 +161,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; /* MTD partition table */ partition@0 { diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index d97b0efa43f3..1d6c6fa703e4 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -19,13 +19,13 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; /* Power supply provides a fixed 5V @2A */ - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -34,7 +34,7 @@ }; /* Power supply provides a fixed 3.3V @3A */ - vmmcsd_fixed: fixedregulator@1 { + vmmcsd_fixed: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index f313999c503e..483d585c8908 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -19,7 +19,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; @@ -27,7 +27,7 @@ leds { compatible = "gpio-leds"; - led@0 { + led0 { label = "nanobone:green:usr1"; gpios = <&gpio1 5 0>; default-state = "off"; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 8867aaaec54d..30e2f8770aaf 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -20,7 +20,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; @@ -41,15 +41,15 @@ compatible = "ti,da830-evm-audio"; }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; }; - v3v3c_reg: fixedregulator@1 { + v3v3c_reg: fixedregulator1 { compatible = "regulator-fixed"; }; - vdd5_reg: fixedregulator@2 { + vdd5_reg: fixedregulator2 { compatible = "regulator-fixed"; }; }; @@ -595,14 +595,14 @@ pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; - led@0 { + led0 { label = "pepper:user0:blue"; gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; default-state = "off"; }; - led@1 { + led1 { label = "pepper:user1:red"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; @@ -616,21 +616,21 @@ #address-cells = <1>; #size-cells = <0>; - button@0 { + button0 { label = "home"; linux,code = <KEY_HOME>; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; wakeup-source; }; - button@1 { + button1 { label = "menu"; linux,code = <KEY_MENU>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; wakeup-source; }; - buttons@2 { + buttons2 { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 86f773165d5c..75e24add3f13 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -25,7 +25,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; @@ -33,7 +33,7 @@ regulators { compatible = "simple-bus"; - vcc5v: fixedregulator@0 { + vcc5v: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vcc5v"; regulator-min-microvolt = <5000000>; @@ -197,7 +197,7 @@ gpmc,wr-access-ns = <30>; gpmc,wr-data-mux-bus-ns = <0>; - elm_id = <&elm>; + ti,elm-id = <&elm>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 837d5b80ea1d..bf8727a19ece 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -64,50 +64,50 @@ compatible = "gpio-leds"; - led@1 { + led1 { label = "shc:power:red"; gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led2 { label = "shc:power:bl"; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "timer"; default-state = "on"; }; - led@3 { + led3 { label = "shc:lan:red"; gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@4 { + led4 { label = "shc:lan:bl"; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@5 { + led5 { label = "shc:cloud:red"; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@6 { + led6 { label = "shc:cloud:bl"; gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index a6efbe6eda3b..b0dfa6f14cd5 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -19,6 +19,11 @@ }; }; + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + chosen { stdout-path = &uart0; }; @@ -28,25 +33,25 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - led@0 { + led0 { label = "sl50:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@1 { + led1 { label = "sl50:red:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@2 { + led2 { label = "sl50:green:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@3 { + led3 { label = "sl50:red:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -103,7 +108,7 @@ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; }; - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 282f6d4b27bc..02c67365c4e1 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -11,10 +11,14 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; + sound: sound_iface { + compatible = "ti,da830-evm-audio"; + }; + regulators { compatible = "simple-bus"; - vcc3v3: fixedregulator@1 { + vcc3v3: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; regulator-min-microvolt = <3300000>; @@ -24,6 +28,58 @@ }; }; +/* Audio */ +&am33xx_pinmux { + mcasp0_pins: pinmux_mcasp0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ + >; + }; +}; + +&i2c0 { + tlv320aic3007: tlv320aic3007@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + AVDD-supply = <&vcc3v3>; + IOVDD-supply = <&vcc3v3>; + DRVDD-supply = <&vcc3v3>; + DVDD-supply = <&vdig1_reg>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < + 2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */ + >; + tx-num-evt = <16>; + rt-num-evt = <16>; + status = "okay"; +}; + +&sound { + ti,model = "AM335x-Wega"; + ti,audio-codec = <&tlv320aic3007>; + ti,mcasp-controller = <&mcasp0>; + ti,audio-routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + clocks = <&mcasp0_fck>; + clock-names = "mclk"; + status = "okay"; +}; + /* CAN Busses */ &am33xx_pinmux { dcan1_pins: pinmux_dcan1 { @@ -99,6 +155,12 @@ status = "okay"; }; +/* Power */ +&vdig1_reg { + regulator-boot-on; + regulator-always-on; +}; + /* UARTs */ &am33xx_pinmux { uart0_pins: pinmux_uart0 { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 98748c61ed99..eeef6bc8e410 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -11,11 +11,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/am33xx.h> -#include "skeleton.dtsi" - / { compatible = "ti,am33xx"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c0; diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts index f9d8f3948c4a..083ff5073435 100644 --- a/arch/arm/boot/dts/am3517-craneboard.dts +++ b/arch/arm/boot/dts/am3517-craneboard.dts @@ -15,7 +15,7 @@ model = "TI AM3517 CraneBoard (TMDSEVM3517)"; compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index b4127c6493a2..0e4a125f78e3 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -13,7 +13,7 @@ model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 5e3f5e86ffcf..0db19d39d24c 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -15,7 +15,7 @@ serial3 = &uart4; }; - ocp { + ocp@68000000 { am35x_otg_hs: am35x_otg_hs@5c040000 { compatible = "ti,omap3-musb"; ti,hwmods = "am35x_otg_hs"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index fdf5ce63c8e6..3395783c5b4e 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -13,7 +13,7 @@ model = "TeeJet Mt.Ventoux"; compatible = "teejet,mt_ventoux", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 0fadae5396e1..a275fa956813 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -11,12 +11,16 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "ti,am4372", "ti,am43"; interrupt-parent = <&wakeupgen>; + #address-cells = <1>; + #size-cells = <1>; + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; aliases { i2c0 = &i2c0; @@ -132,7 +136,7 @@ cache-level = <2>; }; - ocp { + ocp@44000000 { compatible = "ti,am4372-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 9551c4713173..9e92d480576b 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -209,7 +209,6 @@ #interrupt-cells = <2>; dcdc1: regulator-dcdc1 { - compatible = "ti,tps65218-dcdc1"; regulator-name = "vdd_core"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1144000>; @@ -218,7 +217,6 @@ }; dcdc2: regulator-dcdc2 { - compatible = "ti,tps65218-dcdc2"; regulator-name = "vdd_mpu"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1378000>; @@ -227,7 +225,6 @@ }; dcdc3: regulator-dcdc3 { - compatible = "ti,tps65218-dcdc3"; regulator-name = "vdcdc3"; regulator-suspend-enable; regulator-min-microvolt = <1500000>; @@ -237,7 +234,6 @@ }; dcdc5: regulator-dcdc5 { - compatible = "ti,tps65218-dcdc5"; regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -246,7 +242,6 @@ }; dcdc6: regulator-dcdc6 { - compatible = "ti,tps65218-dcdc6"; regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -255,7 +250,6 @@ }; ldo1: regulator-ldo1 { - compatible = "ti,tps65218-ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 14677d599595..957840cc7b78 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -58,7 +58,7 @@ default-brightness-level = <8>; }; - matrix_keypad: matrix_keypad@0 { + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; col-scan-delay-us = <2>; @@ -513,7 +513,6 @@ #interrupt-cells = <2>; dcdc1: regulator-dcdc1 { - compatible = "ti,tps65218-dcdc1"; regulator-name = "vdd_core"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1144000>; @@ -522,7 +521,6 @@ }; dcdc2: regulator-dcdc2 { - compatible = "ti,tps65218-dcdc2"; regulator-name = "vdd_mpu"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1378000>; @@ -531,33 +529,42 @@ }; dcdc3: regulator-dcdc3 { - compatible = "ti,tps65218-dcdc3"; regulator-name = "vdcdc3"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + regulator-state-disk { + regulator-off-in-suspend; + }; }; + dcdc5: regulator-dcdc5 { - compatible = "ti,tps65218-dcdc5"; regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; dcdc6: regulator-dcdc6 { - compatible = "ti,tps65218-dcdc6"; regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo1: regulator-ldo1 { - compatible = "ti,tps65218-ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 12a69518383e..25ce611c6568 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -104,7 +104,7 @@ #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch0 { label = "power-button"; linux,code = <KEY_POWER>; gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 5687d6b4da60..319d94205350 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -64,7 +64,7 @@ }; }; - matrix_keypad: matrix_keypad@0 { + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; pinctrl-names = "default"; @@ -93,28 +93,28 @@ pinctrl-names = "default"; pinctrl-0 = <&leds_pins>; - led@0 { + led0 { label = "am437x-sk:red:heartbeat"; gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */ linux,default-trigger = "heartbeat"; default-state = "off"; }; - led@1 { + led1 { label = "am437x-sk:green:mmc1"; gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */ linux,default-trigger = "mmc0"; default-state = "off"; }; - led@2 { + led2 { label = "am437x-sk:blue:cpu0"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */ linux,default-trigger = "cpu0"; default-state = "off"; }; - led@3 { + led3 { label = "am437x-sk:blue:usr3"; gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */ default-state = "off"; @@ -428,7 +428,6 @@ #interrupt-cells = <2>; dcdc1: regulator-dcdc1 { - compatible = "ti,tps65218-dcdc1"; /* VDD_CORE limits min of OPP50 and max of OPP100 */ regulator-name = "vdd_core"; regulator-min-microvolt = <912000>; @@ -438,7 +437,6 @@ }; dcdc2: regulator-dcdc2 { - compatible = "ti,tps65218-dcdc2"; /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912000>; @@ -448,16 +446,20 @@ }; dcdc3: regulator-dcdc3 { - compatible = "ti,tps65218-dcdc3"; regulator-name = "vdds_ddr"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + regulator-state-disk { + regulator-off-in-suspend; + }; }; dcdc4: regulator-dcdc4 { - compatible = "ti,tps65218-dcdc4"; regulator-name = "v3_3d"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -465,8 +467,31 @@ regulator-always-on; }; + dcdc5: regulator-dcdc5 { + compatible = "ti,tps65218-dcdc5"; + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + dcdc6: regulator-dcdc6 { + compatible = "ti,tps65218-dcdc6"; + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + ldo1: regulator-ldo1 { - compatible = "ti,tps65218-ldo1"; regulator-name = "v1_8d"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index ad32e55532f8..9d35c3f07cad 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -32,7 +32,7 @@ enable-active-high; }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -67,7 +67,7 @@ }; }; - matrix_keypad: matrix_keypad@0 { + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; col-scan-delay-us = <2>; @@ -421,7 +421,6 @@ #interrupt-cells = <2>; dcdc1: regulator-dcdc1 { - compatible = "ti,tps65218-dcdc1"; regulator-name = "vdd_core"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1144000>; @@ -430,7 +429,6 @@ }; dcdc2: regulator-dcdc2 { - compatible = "ti,tps65218-dcdc2"; regulator-name = "vdd_mpu"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1378000>; @@ -439,7 +437,6 @@ }; dcdc3: regulator-dcdc3 { - compatible = "ti,tps65218-dcdc3"; regulator-name = "vdcdc3"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; @@ -448,7 +445,6 @@ }; dcdc4: regulator-dcdc4 { - compatible = "ti,tps65218-dcdc4"; regulator-name = "vdcdc4"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -457,21 +453,18 @@ }; dcdc5: regulator-dcdc5 { - compatible = "ti,tps65218-dcdc5"; regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; dcdc6: regulator-dcdc6 { - compatible = "ti,tps65218-dcdc6"; regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo1: regulator-ldo1 { - compatible = "ti,tps65218-ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index e3acb99703e1..87bbc66f0f21 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -18,7 +18,7 @@ compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index c4d04c5293b9..9067ca092dc5 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -23,7 +23,7 @@ display0 = &hdmi0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; }; @@ -62,28 +62,28 @@ pinctrl-names = "default"; pinctrl-0 = <&leds_pins_default>; - led@0 { + led0 { label = "beagle-x15:usr0"; gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; - led@1 { + led1 { label = "beagle-x15:usr1"; gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@2 { + led2 { label = "beagle-x15:usr2"; gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@3 { + led3 { label = "beagle-x15:usr3"; gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; linux,default-trigger = "disk-activity"; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 378b142ef88c..203266f88480 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -19,7 +19,7 @@ model = "CompuLab CL-SOM-AM57x"; compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */ }; @@ -29,7 +29,7 @@ pinctrl-names = "default"; pinctrl-0 = <&leds_pins_default>; - led@0 { + led0 { label = "cl-som-am57x:green"; gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 0e63b9dff6e7..03cec62260e1 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -304,3 +304,52 @@ ti,non-removable; max-frequency = <96000000>; }; + +&qspi { + status = "okay"; + + spi-max-frequency = <76800000>; + m25p80@0 { + compatible = "s25fl256s1", "jedec,spi-nor"; + spi-max-frequency = <76800000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000040000>; + }; + partition@1 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@2 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00080000>; + }; + partition@3 { + label = "QSPI.u-boot-env"; + reg = <0x001c0000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x001d0000 0x0010000>; + }; + partition@5 { + label = "QSPI.kernel"; + reg = <0x001e0000 0x0800000>; + }; + partition@6 { + label = "QSPI.file-system"; + reg = <0x009e0000 0x01620000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts index db808f92dd79..90d00b407f85 100644 --- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts +++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts @@ -70,13 +70,12 @@ * associativity as these may be erroneously set * up by boot loader(s). */ - cache-size = <1048576>; // 1MB - cache-sets = <4096>; + cache-size = <131072>; // 128KB + cache-sets = <512>; cache-line-size = <32>; arm,parity-disable; - arm,tag-latency = <1>; - arm,data-latency = <1 1>; - arm,dirty-latency = <1>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; }; scu: scu@1f000000 { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 2364fc56ae13..033fa63544f7 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -155,20 +155,6 @@ status = "okay"; }; - spi0: spi@10600 { - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l25635e", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - }; - }; - nand@d0000 { status = "okay"; num-cs = <1>; @@ -274,3 +260,18 @@ compatible = "linux,spdif-dir"; }; }; + +&spi0 { + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + }; +}; + diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi index 1aba08e4377c..01cded310cbc 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -68,26 +68,6 @@ phy-mode = "rgmii-id"; }; - spi@10600 { - status = "okay"; - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - /* MX25L8006E */ - compatible = "mxicy,mx25l8005", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x100000>; - }; - }; - }; - usb@50000 { status = "okay"; }; @@ -176,3 +156,23 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + /* MX25L8006E */ + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 8ca7a4340c0f..a9cc42776874 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -87,62 +87,6 @@ status = "disabled"; }; - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q064", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; - - /* - * Warning! - * - * Synology u-boot uses its compiled-in environment - * and it seems Synology did not care to change u-boot - * default configuration in order to allow saving a - * modified environment at a sensible location. So, - * if you do a 'saveenv' under u-boot, your modified - * environment will be saved at 1MB after the start - * of the flash, i.e. in the middle of the uImage. - * For that reason, it is strongly advised not to - * change the default environment, unless you know - * what you are doing. - */ - partition@00000000 { /* u-boot */ - label = "RedBoot"; - reg = <0x00000000 0x000c0000>; /* 768KB */ - }; - - partition@000c0000 { /* uImage */ - label = "zImage"; - reg = <0x000c0000 0x002d0000>; /* 2880KB */ - }; - - partition@00390000 { /* uInitramfs */ - label = "rd.gz"; - reg = <0x00390000 0x00440000>; /* 4250KB */ - }; - - partition@007d0000 { /* MAC address and serial number */ - label = "vendor"; - reg = <0x007d0000 0x00010000>; /* 64KB */ - }; - - partition@007e0000 { - label = "RedBoot config"; - reg = <0x007e0000 0x00010000>; /* 64KB */ - }; - - partition@007f0000 { - label = "FIS directory"; - reg = <0x007f0000 0x00010000>; /* 64KB */ - }; - }; - }; - i2c@11000 { compatible = "marvell,mv64xxx-i2c"; pinctrl-0 = <&i2c0_pins>; @@ -347,3 +291,59 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q064", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + + /* + * Warning! + * + * Synology u-boot uses its compiled-in environment + * and it seems Synology did not care to change u-boot + * default configuration in order to allow saving a + * modified environment at a sensible location. So, + * if you do a 'saveenv' under u-boot, your modified + * environment will be saved at 1MB after the start + * of the flash, i.e. in the middle of the uImage. + * For that reason, it is strongly advised not to + * change the default environment, unless you know + * what you are doing. + */ + partition@00000000 { /* u-boot */ + label = "RedBoot"; + reg = <0x00000000 0x000c0000>; /* 768KB */ + }; + + partition@000c0000 { /* uImage */ + label = "zImage"; + reg = <0x000c0000 0x002d0000>; /* 2880KB */ + }; + + partition@00390000 { /* uInitramfs */ + label = "rd.gz"; + reg = <0x00390000 0x00440000>; /* 4250KB */ + }; + + partition@007d0000 { /* MAC address and serial number */ + label = "vendor"; + reg = <0x007d0000 0x00010000>; /* 64KB */ + }; + + partition@007e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; /* 64KB */ + }; + + partition@007f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; /* 64KB */ + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index a718866ba52d..3ccedc9dffb2 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -148,26 +148,6 @@ interrupts = <50>; }; - spi0: spi@10600 { - reg = <0x10600 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <30>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - reg = <0x10680 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <92>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - i2c0: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; #address-cells = <1>; @@ -320,6 +300,42 @@ status = "disabled"; }; }; + + spi0: spi@10600 { + reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */ + <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */ + <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */ + <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */ + <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */ + <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */ + <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */ + <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */ + <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */ + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <30>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */ + <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */ + <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */ + <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */ + <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */ + <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */ + <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */ + <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */ + <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */ + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 3b06aa835448..b4258105e91f 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -134,24 +134,6 @@ wt-override; }; - /* - * Default SPI pinctrl setting, can be overwritten on - * board level if a different configuration is used. - */ - spi0: spi@10600 { - compatible = "marvell,armada-370-spi", - "marvell,orion-spi"; - pinctrl-0 = <&spi0_pins1>; - pinctrl-names = "default"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-370-spi", - "marvell,orion-spi"; - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - }; - i2c0: i2c@11000 { reg = <0x11000 0x20>; }; @@ -447,3 +429,19 @@ marvell,function = "ge1"; }; }; + +/* + * Default SPI pinctrl setting, can be overwritten on + * board level if a different configuration is used. + */ +&spi0 { + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi0_pins1>; + pinctrl-names = "default"; +}; + +&spi1 { + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 2d3fd6e76e2c..db5b9f6b615d 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -65,20 +65,6 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { - spi1: spi@10680 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <54000000>; - }; - }; - i2c0: i2c@11000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -155,6 +141,10 @@ bm,pool-short = <3>; }; + usb@58000 { + status = "okay"; + }; + /* CON4 */ ethernet@70000 { pinctrl-names = "default"; @@ -178,15 +168,35 @@ nfc: flash@d0000 { status = "okay"; - #address-cells = <1>; - #size-cells = <1>; - num-cs = <1>; nand-ecc-strength = <4>; nand-ecc-step-size = <512>; marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x00000000 0x00800000>; + read-only; + }; + + partition@800000 { + label = "uImage"; + reg = <0x00800000 0x00400000>; + read-only; + }; + + partition@c00000 { + label = "Root"; + reg = <0x00c00000 0x3f400000>; + }; + }; }; usb3@f0000 { @@ -239,3 +249,17 @@ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; }; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <54000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 22f7a13e20b4..8f0e508f64ae 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -62,11 +62,6 @@ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { - - spi@10600 { - status = "disabled"; - }; - i2c@11000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -332,3 +327,7 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 2e0556af6e5e..2d2593023fd0 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -315,30 +315,6 @@ status = "okay"; }; - spi@10680 { - /* - * We don't seem to have the W25Q32 on the - * A1 Rev 2.0 boards, so disable SPI. - * CS0: W25Q32 (doesn't appear to be present) - * CS1: - * CS2: mikrobus - */ - pinctrl-0 = <&spi1_pins - &clearfog_spi1_cs_pins - &mikro_spi_pins>; - pinctrl-names = "default"; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "w25q32", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <3000000>; - status = "disabled"; - }; - }; - usb@58000 { /* CON3, nearest power. */ status = "okay"; @@ -444,3 +420,27 @@ }; }; }; + +&spi1 { + /* + * We don't seem to have the W25Q32 on the + * A1 Rev 2.0 boards, so disable SPI. + * CS0: W25Q32 (doesn't appear to be present) + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins + &clearfog_spi1_cs_pins + &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index ea93ed727030..de26c762239c 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -70,18 +70,6 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { - spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25q32", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - i2c@11000 { status = "okay"; clock-frequency = <100000>; @@ -201,3 +189,16 @@ }; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; + diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index fd75e5e9550f..895fa6cfa15a 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -64,21 +64,6 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { - spi@10600 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - m25p,fast-read; - }; - }; - i2c@11000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -433,3 +418,18 @@ marvell,function = "gpio"; }; }; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index 853f9735cc70..dd3462ddb6b9 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -70,18 +70,6 @@ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { - spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - i2c@11000 { status = "okay"; clock-frequency = <100000>; @@ -142,3 +130,16 @@ }; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; + diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3312be6c82cc..2d7668848c5a 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -170,30 +170,6 @@ <0xc100 0x100>; }; - spi0: spi@10600 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - i2c0: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; @@ -287,6 +263,15 @@ marvell,function = "spi1"; }; + nand_pins: nand-pins { + marvell,pins = "mpp22", "mpp34", "mpp23", + "mpp33", "mpp38", "mpp28", + "mpp40", "mpp42", "mpp35", + "mpp36", "mpp25", "mpp30", + "mpp32"; + marvell,function = "dev"; + }; + uart0_pins: uart-pins-0 { marvell,pins = "mpp0", "mpp1"; marvell,function = "ua0"; @@ -649,6 +634,30 @@ no-memory-wc; status = "disabled"; }; + + spi0: spi@10600 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts new file mode 100644 index 000000000000..34e279d973c8 --- /dev/null +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -0,0 +1,175 @@ +/* + * Device Tree file for Marvell Armada 390 Development Board + * (DB-88F6920) + * + * Copyright (C) 2016 Marvell + * + * Grzegorz Jaszczyk <jaz@semihalf.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-390.dtsi" + +/ { + model = "Marvell Armada 390 Development Board"; + compatible = "marvell,a390-db", "marvell,armada390"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + i2c@11000 { + status = "okay"; + clock-frequency = <100000>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + /* CON104 */ + serial@12000 { + status = "okay"; + }; + + /* CON97 */ + usb@58000 { + status = "okay"; + }; + + flash@d0000 { + status = "okay"; + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; + + /* CON98 */ + usb3@f8000 { + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + + /* CON30 */ + pcie@1,0 { + status = "okay"; + }; + + /* CON44 */ + pcie@2,0 { + status = "okay"; + }; + + /* CON61 */ + pcie@3,0 { + status = "okay"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + spi-flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", + "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x400000>; + }; + partition@400000 { + label = "Filesystem"; + reg = <0x400000 0xc00000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi index 094e39c66039..6cd18d8aaac7 100644 --- a/arch/arm/boot/dts/armada-390.dtsi +++ b/arch/arm/boot/dts/armada-390.dtsi @@ -47,6 +47,8 @@ #include "armada-39x.dtsi" / { + compatible = "marvell,armada390"; + soc { internal-regs { pinctrl@18000 { @@ -54,4 +56,5 @@ reg = <0x18000 0x20>; }; }; + }; }; diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts new file mode 100644 index 000000000000..2cdbba804c1e --- /dev/null +++ b/arch/arm/boot/dts/armada-395-gp.dts @@ -0,0 +1,163 @@ +/* + * Device Tree file for Marvell Armada 395 GP board + * + * Copyright (C) 2016 Marvell + * + * Grzegorz Jaszczyk <jaz@semihalf.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-395.dtsi" + +/ { + model = "Marvell Armada 395 GP Board"; + compatible = "marvell,a395-gp", "marvell,armada395", + "marvell,armada390"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + i2c@11000 { + status = "okay"; + clock-frequency = <100000>; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + serial@12000 { + /* + * Exported on the micro USB connector CON17 + * through an FTDI + */ + status = "okay"; + }; + + /* CON1 */ + usb@58000 { + status = "okay"; + }; + + /* CON2 */ + sata@a8000 { + status = "okay"; + }; + + flash@d0000 { + status = "okay"; + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x00000000 0x00600000>; + read-only; + }; + + partition@800000 { + label = "uImage"; + reg = <0x00600000 0x00400000>; + read-only; + }; + + partition@1000000 { + label = "Root"; + reg = <0x00a00000 0x3f600000>; + }; + }; + }; + + /* CON18 */ + sdhci@d8000 { + clock-frequency = <200000000>; + broken-cd; + wp-inverted; + bus-width = <8>; + status = "okay"; + no-1-8-v; + }; + + /* CON4 */ + usb3@f0000 { + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * The two PCIe units are accessible through + * mini PCIe slot on the board. + */ + + /* CON7 */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + + /* CON8 */ + pcie@4,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi new file mode 100644 index 000000000000..ab5dc49f2bff --- /dev/null +++ b/arch/arm/boot/dts/armada-395.dtsi @@ -0,0 +1,76 @@ +/* + * Device Tree Include file for Marvell Armada 395 SoC. + * + * Copyright (C) 2016 Marvell + * + * Grzegorz Jaszczyk <jaz@semihalf.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-39x.dtsi" + +/ { + compatible = "marvell,armada395", "marvell,armada390"; + + soc { + internal-regs { + pinctrl@18000 { + compatible = "marvell,mv88f6925-pinctrl"; + reg = <0x18000 0x20>; + }; + + sata@a8000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xa8000 0x2000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 15>; + status = "disabled"; + }; + + usb3@f0000 { + compatible = "marvell,armada-380-xhci"; + reg = <0xf0000 0x4000>,<0xf4000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index 788c3badb681..268c8349c884 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -65,30 +65,6 @@ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; internal-regs { - spi@10680 { - status = "okay"; - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <108000000>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x400000>; - }; - - partition@400000 { - label = "Filesystem"; - reg = <0x400000 0x1000000>; - }; - }; - }; - i2c@11000 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; @@ -108,6 +84,10 @@ status = "okay"; }; + usb@58000 { + status = "okay"; + }; + flash@d0000 { status = "okay"; pinctrl-0 = <&nand_pins>; @@ -132,6 +112,10 @@ reg = <0x1000000 0x3f000000>; }; }; + + usb3@f8000 { + status = "okay"; + }; }; pcie-controller { @@ -151,3 +135,27 @@ }; }; }; + +&spi1 { + status = "okay"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x400000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x400000 0x1000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi index fdc25914e3a3..234a99891a29 100644 --- a/arch/arm/boot/dts/armada-398.dtsi +++ b/arch/arm/boot/dts/armada-398.dtsi @@ -44,7 +44,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "armada-39x.dtsi" +#include "armada-395.dtsi" / { compatible = "marvell,armada398", "marvell,armada390"; @@ -55,6 +55,14 @@ compatible = "marvell,mv88f6928-pinctrl"; reg = <0x18000 0x20>; }; + + sata@e0000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xe0000 0x2000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 30>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index dc6efd386dbc..34cba87f9200 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -55,6 +55,8 @@ compatible = "marvell,armada390"; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -78,6 +80,11 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts-extended = <&mpic 3>; + }; + soc { compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus", "simple-bus"; @@ -131,30 +138,6 @@ <0xc100 0x100>; }; - spi0: spi@10600 { - compatible = "marvell,armada-390-spi", - "marvell,orion-spi"; - reg = <0x10600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-390-spi", - "marvell,orion-spi"; - reg = <0x10680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - i2c0: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; @@ -269,6 +252,34 @@ }; }; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <28>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + }; + system-controller@18200 { compatible = "marvell,armada-390-system-controller", "marvell,armada-370-xp-system-controller"; @@ -317,11 +328,29 @@ clock-names = "nbclk", "fixed"; }; + watchdog@20300 { + compatible = "marvell,armada-380-wdt"; + reg = <0x20300 0x34>, <0x20704 0x4>, + <0x18260 0x4>; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; + }; + cpurst@20800 { compatible = "marvell,armada-370-cpu-reset"; reg = <0x20800 0x10>; }; + mpcore-soc-ctrl@20d20 { + compatible = "marvell,armada-380-mpcore-soc-ctrl"; + reg = <0x20d20 0x6c>; + }; + + coherency-fabric@21010 { + compatible = "marvell,armada-380-coherency-fabric"; + reg = <0x21010 0x1c>; + }; + pmsu@22000 { compatible = "marvell,armada-390-pmsu", "marvell,armada-380-pmsu"; @@ -368,6 +397,13 @@ }; }; + rtc@a3800 { + compatible = "marvell,armada-380-rtc"; + reg = <0xa3800 0x20>, <0x184a0 0x0c>; + reg-names = "rtc", "rtc-soc"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + }; + flash@d0000 { compatible = "marvell,armada370-nand"; reg = <0xd0000 0x54>; @@ -380,7 +416,10 @@ sdhci@d8000 { compatible = "marvell,armada-380-sdhci"; - reg = <0xd8000 0x1000>, <0xdc000 0x100>; + reg-names = "sdhci", "mbus", "conf-sdio3"; + reg = <0xd8000 0x1000>, + <0xdc000 0x100>, + <0x18454 0x4>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 17>; mrvl,clk-delay-cycles = <0x1F>; @@ -395,6 +434,12 @@ clocks = <&mainpll>; clock-output-names = "nand"; }; + + thermal@e8078 { + compatible = "marvell,armada380-thermal"; + reg = <0xe4078 0x4>, <0xe4074 0x4>; + status = "okay"; + }; }; pcie-controller { @@ -501,6 +546,30 @@ status = "disabled"; }; }; + + spi0: spi@10600 { + compatible = "marvell,armada-390-spi", + "marvell,orion-spi"; + reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,armada-390-spi", + "marvell,orion-spi"; + reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; clocks { @@ -510,5 +579,12 @@ #clock-cells = <0>; clock-frequency = <1000000000>; }; + + /* 25 MHz reference crystal */ + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 5c21b236721f..ce152719bc28 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -135,18 +135,6 @@ phy = <&phy1>; phy-mode = "rgmii-id"; }; - - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; }; }; @@ -179,3 +167,15 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 62422a90aeb2..075120bc3ec4 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -231,18 +231,6 @@ status = "okay"; }; - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p64", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; - }; - }; - nand@d0000 { status = "okay"; num-cs = <1>; @@ -277,3 +265,15 @@ }; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 061f4237760e..190e4eccb180 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -232,18 +232,6 @@ status = "okay"; }; - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - bm@c0000 { status = "okay"; }; @@ -262,3 +250,15 @@ }; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 7a461541ce50..076f27f22c3b 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -279,18 +279,6 @@ reg = <0x180000 0x780000>; /* 7.5MB */ }; }; - - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "everspin,mr25h256"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <40000000>; - }; - }; }; }; @@ -398,3 +386,15 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <40000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index d17dab0a6f51..ae286736b90a 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -110,62 +110,6 @@ status = "disabled"; }; - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q064", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; - - /* - * Warning! - * - * Synology u-boot uses its compiled-in environment - * and it seems Synology did not care to change u-boot - * default configuration in order to allow saving a - * modified environment at a sensible location. So, - * if you do a 'saveenv' under u-boot, your modified - * environment will be saved at 1MB after the start - * of the flash, i.e. in the middle of the uImage. - * For that reason, it is strongly advised not to - * change the default environment, unless you know - * what you are doing. - */ - partition@00000000 { /* u-boot */ - label = "RedBoot"; - reg = <0x00000000 0x000d0000>; /* 832KB */ - }; - - partition@000c0000 { /* uImage */ - label = "zImage"; - reg = <0x000d0000 0x002d0000>; /* 2880KB */ - }; - - partition@003a0000 { /* uInitramfs */ - label = "rd.gz"; - reg = <0x003a0000 0x00430000>; /* 4250KB */ - }; - - partition@007d0000 { /* MAC address and serial number */ - label = "vendor"; - reg = <0x007d0000 0x00010000>; /* 64KB */ - }; - - partition@007e0000 { - label = "RedBoot config"; - reg = <0x007e0000 0x00010000>; /* 64KB */ - }; - - partition@007f0000 { - label = "FIS directory"; - reg = <0x007f0000 0x00010000>; /* 64KB */ - }; - }; - }; - i2c@11000 { clock-frequency = <400000>; status = "okay"; @@ -362,3 +306,59 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q064", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + + /* + * Warning! + * + * Synology u-boot uses its compiled-in environment + * and it seems Synology did not care to change u-boot + * default configuration in order to allow saving a + * modified environment at a sensible location. So, + * if you do a 'saveenv' under u-boot, your modified + * environment will be saved at 1MB after the start + * of the flash, i.e. in the middle of the uImage. + * For that reason, it is strongly advised not to + * change the default environment, unless you know + * what you are doing. + */ + partition@00000000 { /* u-boot */ + label = "RedBoot"; + reg = <0x00000000 0x000d0000>; /* 832KB */ + }; + + partition@000c0000 { /* uImage */ + label = "zImage"; + reg = <0x000d0000 0x002d0000>; /* 2880KB */ + }; + + partition@003a0000 { /* uInitramfs */ + label = "rd.gz"; + reg = <0x003a0000 0x00430000>; /* 4250KB */ + }; + + partition@007d0000 { /* MAC address and serial number */ + label = "vendor"; + reg = <0x007d0000 0x00010000>; /* 64KB */ + }; + + partition@007e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; /* 64KB */ + }; + + partition@007f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; /* 64KB */ + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 553349c07f28..4a5f99e65b51 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -84,19 +84,6 @@ wt-override; }; - spi0: spi@10600 { - compatible = "marvell,armada-xp-spi", - "marvell,orion-spi"; - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-xp-spi", - "marvell,orion-spi"; - }; - - i2c0: i2c@11000 { compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x100>; @@ -362,6 +349,12 @@ marvell,function = "spi0"; }; + spi1_pins: spi1-pins { + marvell,pins = "mpp13", "mpp14", + "mpp16", "mpp17"; + marvell,function = "spi1"; + }; + uart2_pins: uart2-pins { marvell,pins = "mpp42", "mpp43"; marvell,function = "uart2"; @@ -372,3 +365,15 @@ marvell,function = "uart3"; }; }; + +&spi0 { + compatible = "marvell,armada-xp-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; +}; + +&spi1 { + compatible = "marvell,armada-xp-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi index 16331aa79775..ba332e399be4 100644 --- a/arch/arm/boot/dts/armv7-m.dtsi +++ b/arch/arm/boot/dts/armv7-m.dtsi @@ -1,5 +1,3 @@ -#include "skeleton.dtsi" - / { nvic: interrupt-controller@e000e100 { compatible = "arm,armv7m-nvic"; diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi index 3fac4c4d0007..3489019cc0dc 100644 --- a/arch/arm/boot/dts/artpec6.dtsi +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -41,6 +41,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axis,artpec6-clkctrl.h> #include "skeleton.dtsi" / { @@ -109,14 +110,14 @@ compatible = "arm,cortex-a9-global-timer"; reg = <0xfaf00200 0x20>; interrupts = <GIC_PPI 11 0xf01>; - clocks = <&clkctrl 1>; + clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>; }; timer@faf00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xfaf00600 0x20>; interrupts = <GIC_PPI 13 0xf04>; - clocks = <&clkctrl 1>; + clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>; status = "disabled"; }; @@ -136,12 +137,20 @@ arm,data-latency = <1 1 1>; arm,tag-latency = <1 1 1>; arm,filter-ranges = <0x0 0x80000000>; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <0>; + prefetch-data = <1>; + prefetch-instr = <1>; + arm,prefetch-offset = <0>; + arm,prefetch-drop = <1>; }; pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; interrupt-parent = <&intc>; }; @@ -157,7 +166,7 @@ ethernet: ethernet@f8010000 { clock-names = "phy_ref_clk", "apb_pclk"; clocks = <ð_phy_ref_clk>, - <&clkctrl 4>; + <&clkctrl ARTPEC6_CLK_ETH_ACLK>; compatible = "snps,dwc-qos-ethernet-4.10"; interrupt-parent = <&intc>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -175,8 +184,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xf8036000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkctrl 13>, - <&clkctrl 12>; + clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, + <&clkctrl ARTPEC6_CLK_UART_PCLK>; clock-names = "uart_clk", "apb_pclk"; status = "disabled"; }; @@ -184,8 +193,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xf8037000 0x1000>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkctrl 13>, - <&clkctrl 12>; + clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, + <&clkctrl ARTPEC6_CLK_UART_PCLK>; clock-names = "uart_clk", "apb_pclk"; status = "disabled"; }; @@ -193,8 +202,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xf8038000 0x1000>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkctrl 13>, - <&clkctrl 12>; + clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, + <&clkctrl ARTPEC6_CLK_UART_PCLK>; clock-names = "uart_clk", "apb_pclk"; status = "disabled"; }; @@ -202,8 +211,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xf8039000 0x1000>; interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkctrl 13>, - <&clkctrl 12>; + clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, + <&clkctrl ARTPEC6_CLK_UART_PCLK>; clock-names = "uart_clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index afbe89c01df5..675bb0f30825 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -53,6 +53,12 @@ interrupt-controller; #interrupt-cells = <1>; + axp_gpio: gpio { + compatible = "x-powers,axp209-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <1500>; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1a15db8e376b..5fd4c37680fd 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -136,7 +136,7 @@ pinctrl-names = "default"; pinctrl-0 = <&nand_cs3_pins>; }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index 4128fa91823c..d6657b3bae84 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -12,13 +12,13 @@ model = "DM8148 EVM"; compatible = "ti,dm8148-evm", "ti,dm8148"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; /* MIC94060YC6 controlled by SD1_POW pin */ - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 3f184863e0c5..63883b3479f9 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -11,7 +11,7 @@ model = "HP t410 Smart Zero Client"; compatible = "hp,t410", "ti,dm8148"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; @@ -27,7 +27,7 @@ regulator-always-on; }; - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 68e412c9863c..ff90a6ce6bdc 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -7,11 +7,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/dm814x.h> -#include "skeleton.dtsi" - / { compatible = "ti,dm814"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index f50348bdd857..0bf55fa72dea 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -12,14 +12,14 @@ model = "DM8168 EVM"; compatible = "ti,dm8168-evm", "ti,dm8168"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000 /* 1 GB */ 0xc0000000 0x40000000>; /* 1 GB */ }; /* FDC6331L controlled by SD_POW pin */ - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 44e39c743b53..f1e0f771ff29 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -7,11 +7,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { compatible = "ti,dm816"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index f820573f4a4a..155eb32ee213 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -12,13 +12,13 @@ model = "DRA62x J5 Eco EVM"; compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; /* MIC94060YC6 controlled by SD1_POW pin */ - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index bafcfac067ec..132f2be10889 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -16,7 +16,7 @@ model = "TI DRA742"; compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; @@ -105,25 +105,25 @@ leds { compatible = "gpio-leds"; - led@0 { + led0 { label = "dra7:usr1"; gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@1 { + led1 { label = "dra7:usr2"; gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@2 { + led2 { label = "dra7:usr3"; gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@3 { + led3 { label = "dra7:usr4"; gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -664,10 +664,10 @@ &qspi { status = "okay"; - spi-max-frequency = <64000000>; + spi-max-frequency = <76800000>; m25p80@0 { compatible = "s25fl256s1"; - spi-max-frequency = <64000000>; + spi-max-frequency = <76800000>; reg = <0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d9bfb94a2992..147df90d2126 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -10,8 +10,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/dra.h> -#include "skeleton.dtsi" - #define MAX_SOURCES 400 / { @@ -301,6 +299,7 @@ 0x82000000 0 0x20013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <0>; ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; @@ -336,6 +335,7 @@ 0x82000000 0 0x30013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <1>; ti,hwmods = "pcie2"; phys = <&pcie2_phy>; phy-names = "pcie-phy0"; @@ -1413,7 +1413,7 @@ ti,hwmods = "ocp2scp1"; usb2_phy1: phy@4a084000 { - compatible = "ti,omap-usb2"; + compatible = "ti,dra7x-usb2", "ti,omap-usb2"; reg = <0x4a084000 0x400>; syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, @@ -1717,7 +1717,7 @@ mac: ethernet@48484000 { compatible = "ti,dra7-cpsw","ti,cpsw"; ti,hwmods = "gmac"; - clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; + clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>; clock-names = "fck", "cpts"; cpdma_channels = <8>; ale_entries = <1024>; @@ -1726,7 +1726,7 @@ mac_control = <0x20>; slaves = <2>; active_slave = <0>; - cpts_clock_mult = <0x80000000>; + cpts_clock_mult = <0x784CFE14>; cpts_clock_shift = <29>; reg = <0x48484000 0x1000 0x48485200 0x2E00>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 9d3cf50ca37e..c94d8d64710d 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -681,10 +681,10 @@ &qspi { status = "okay"; - spi-max-frequency = <64000000>; + spi-max-frequency = <76800000>; m25p80@0 { compatible = "s25fl256s1"; - spi-max-frequency = <64000000>; + spi-max-frequency = <76800000>; reg = <0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index f9cfd3bb4dc2..064b322a7a04 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -11,7 +11,7 @@ / { model = "TI DRA722 Rev C EVM"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index cc1d32ca4a8a..e3a9b6985693 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -9,7 +9,7 @@ / { model = "TI DRA722"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 8378b44ee567..3330738e4c6e 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1003,6 +1003,14 @@ ti,index-power-of-two; }; + gmac_main_clk: gmac_main_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&gmac_250m_dclk_div>; + clock-mult = <1>; + clock-div = <2>; + }; + l3init_480m_dclk_div: l3init_480m_dclk_div@1ac { #clock-cells = <0>; compatible = "ti,divider-clock"; @@ -1718,13 +1726,12 @@ reg = <0x0c00>; }; - gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@13d0 { + rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 { #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll_gmac_m2_ck>; + compatible = "ti,mux-clock"; + clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>; ti,bit-shift = <24>; reg = <0x13d0>; - ti,dividers = <2>; }; gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 { diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts index 504cf45d3cb8..98fc667d22c7 100644 --- a/arch/arm/boot/dts/efm32gg-dk3750.dts +++ b/arch/arm/boot/dts/efm32gg-dk3750.dts @@ -16,7 +16,8 @@ bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0"; }; - memory { + memory@88000000 { + device_type = "memory"; reg = <0x88000000 0x400000>; }; @@ -74,7 +75,7 @@ status = "ok"; }; - boardfpga: boardfpga { + boardfpga: boardfpga@80000000 { compatible = "efm32board"; reg = <0x80000000 0x400>; irq-gpios = <&gpio 64 1>; diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi index c747983771c7..b78c57e51ed5 100644 --- a/arch/arm/boot/dts/efm32gg.dtsi +++ b/arch/arm/boot/dts/efm32gg.dtsi @@ -4,10 +4,14 @@ * Documentation available from * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf */ + #include "armv7-m.dtsi" #include "dt-bindings/clock/efm32-cmu.h" / { + #address-cells = <1>; + #size-cells = <1>; + aliases { i2c0 = &i2c0; i2c1 = &i2c1; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 9a75e3effbc9..cf95202fa310 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -269,7 +269,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; hdmi-en-supply = <&hdmi_en>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 58ad48e7b8f7..be644fe6a0fd 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -227,7 +227,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; vdd-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index ea70603f660d..3d981f32874d 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -152,7 +152,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 381af134c4c8..7f27263728a1 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -116,7 +116,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; }; &i2c_0 { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index fadbea744e1a..1055d25c0ccc 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -260,7 +260,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; phy = <&hdmiphy>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 44f4292bfef6..1d52a79b2f18 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -91,7 +91,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; phy = <&hdmiphy>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index d9499310a301..3912969ec223 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -26,7 +26,7 @@ }; chosen { - linux,stdout-path = &serial_2; + stdout-path = "serial2:115200n8"; }; emmc_pwrseq: pwrseq { diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index fe4e0915c0c6..f6f256fd9b5e 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -179,7 +179,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index ed8f3426911b..29546465d3da 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -130,7 +130,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index d56253049ccb..7bb8a370072a 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -26,7 +26,7 @@ }; chosen { - linux,stdout-path = &serial_2; + stdout-path = "serial2:115200n8"; }; firmware@02073000 { @@ -250,7 +250,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 5ec71e2400fd..51a8bca4691c 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -179,7 +179,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index cf06e32ee108..4b34b54e09a1 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -42,7 +42,7 @@ }; syscon { - compatible = "arm,integrator-ap-syscon"; + compatible = "arm,integrator-ap-syscon", "syscon"; reg = <0x11000000 0x100>; interrupt-parent = <&pic>; /* These are the logical module IRQs */ diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index d43f15b4f79a..79430fbfec3b 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -94,7 +94,7 @@ }; syscon { - compatible = "arm,integrator-cp-syscon"; + compatible = "arm,integrator-cp-syscon", "syscon"; reg = <0xcb000000 0x100>; }; diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 4c32ebc1425a..ae1ebe7ee021 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -47,18 +47,26 @@ status = "okay"; }; -&usb { +&keystone_usb0 { status = "okay"; }; +&usb0 { + dr_mode = "host"; +}; + &usb1_phy { status = "okay"; }; -&usb1 { +&keystone_usb1 { status = "okay"; }; +&usb1 { + dr_mode = "peripheral"; +}; + &i2c0 { dtt@50 { compatible = "at,24c1024"; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 9a51b8c88581..497c417db5b6 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -61,7 +61,7 @@ status = "disabled"; }; - usb1: usb@25000000 { + keystone_usb1: usb@25000000 { compatible = "ti,keystone-dwc3"; #address-cells = <1>; #size-cells = <1>; @@ -74,7 +74,7 @@ dma-ranges; status = "disabled"; - dwc3@25010000 { + usb1: dwc3@25010000 { compatible = "synopsys,dwc3"; reg = <0x25010000 0x70000>; interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 3372615b885c..2919c5190653 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -83,6 +83,11 @@ pinctrl-single,function-mask = <0x001b0007>; }; + devctrl: device-state-control@02620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; + }; + uart0: serial@02530c00 { compatible = "ns16550a"; current-speed = <115200>; @@ -93,5 +98,32 @@ clock-frequency = <200000000>; status = "disabled"; }; + + kirq0: keystone_irq@026202a0 { + compatible = "ti,keystone-irq"; + interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <1>; + ti,syscon-dev = <&devctrl 0x2a0>; + }; + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; + + msgmgr: msgmgr@02a00000 { + compatible = "ti,k2g-message-manager"; + #mbox-cells = <2>; + reg-names = "queue_proxy_region", + "queue_state_debug_region"; + reg = <0x02a00000 0x400000>, <0x028c3400 0x400>; + interrupt-names = "rx_005", + "rx_057"; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index b38b3441818b..2156ff92d08f 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -83,10 +83,14 @@ status = "okay"; }; -&usb { +&keystone_usb0 { status = "okay"; }; +&usb0 { + dr_mode = "host"; +}; + &aemif { cs0 { #address-cells = <2>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index 7f9c2e94d605..056b42f99d7a 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -32,10 +32,14 @@ status = "okay"; }; -&usb { +&keystone_usb0 { status = "okay"; }; +&usb0 { + dr_mode = "host"; +}; + &i2c0 { dtt@50 { compatible = "at,24c1024"; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 00cb314d5e4d..02708ba2d4f4 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -70,14 +70,6 @@ cpu_on = <0x84000003>; }; - psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -196,7 +188,7 @@ status = "disabled"; }; - usb: usb@2680000 { + keystone_usb0: usb@2680000 { compatible = "ti,keystone-dwc3"; #address-cells = <1>; #size-cells = <1>; @@ -209,7 +201,7 @@ dma-ranges; status = "disabled"; - dwc3@2690000 { + usb0: dwc3@2690000 { compatible = "synopsys,dwc3"; reg = <0x2690000 0x70000>; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 0db0e3edc88f..94e49f32d5f9 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -41,7 +41,7 @@ }; pinctrl: pin-controller@10000 { - pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; + pinctrl-0 = <&pmx_dip_switches>; pinctrl-names = "default"; pmx_uart0: pmx-uart0 { @@ -174,3 +174,10 @@ phy-handle = <ðphy0>; }; }; + +&gpio0 { + status = "okay"; + + pinctrl-0 = <&pmx_gpio_header>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 365f39ff58bb..0ff1c2de95bf 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -35,10 +35,15 @@ ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - linux,mtd-name = "micron,mt29f4g16abbda3w"; + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; @@ -54,10 +59,6 @@ gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; gpmc,device-width = <2>; - - gpmc,page-burst-access-ns = <5>; - gpmc,cycle2cycle-delay-ns = <50>; - #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 5e9a13c0eaf7..731ec37aed5b 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -13,6 +13,11 @@ }; }; + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; + leds { compatible = "gpio-leds"; user0 { @@ -46,6 +51,7 @@ linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index fdb736c82045..7cae9c5e27db 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -20,6 +20,9 @@ #define LPC_GPIO(port, pin) (port * 32 + pin) / { + #address-cells = <1>; + #size-cells = <1>; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -186,6 +189,10 @@ clock-names = "stmmaceth"; resets = <&rgu 22>; reset-names = "stmmaceth"; + rx-fifo-depth = <256>; + tx-fifo-depth = <256>; + snps,pbl = <4>; /* 32 (8x mode) */ + snps,force_thresh_dma_mode; status = "disabled"; }; diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts index 5cfadb06c8df..7c16d639a1b4 100644 --- a/arch/arm/boot/dts/lpc4337-ciaa.dts +++ b/arch/arm/boot/dts/lpc4337-ciaa.dts @@ -30,7 +30,7 @@ stdout-path = &uart2; }; - memory { + memory@28000000 { device_type = "memory"; reg = <0x28000000 0x0800000>; /* 8 MB */ }; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 6c9048d4d03c..874c75d44013 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -33,7 +33,7 @@ stdout-path = &uart0; }; - memory { + memory@28000000 { device_type = "memory"; reg = <0x28000000 0x800000>; /* 8 MB */ }; @@ -424,7 +424,7 @@ /* NXP SE97BTP with temperature sensor + eeprom */ sensor@18 { - compatible = "nxp,jc42"; + compatible = "nxp,se97", "jedec,jc-42.4-temp"; reg = <0x18>; }; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 1919be4dab2b..9b5fad622522 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -33,7 +33,7 @@ stdout-path = &uart0; }; - memory { + memory@28000000 { device_type = "memory"; reg = <0x28000000 0x2000000>; /* 32 MB */ }; diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi index e3fed8d34558..efb8a03cb970 100644 --- a/arch/arm/boot/dts/mps2.dtsi +++ b/arch/arm/boot/dts/mps2.dtsi @@ -42,6 +42,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include "skeleton.dtsi" #include "armv7-m.dtsi" / { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 578fa2a54dce..4f793a025a72 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -12,11 +12,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 34cdecb4fdda..9265c0b9c3f3 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -13,7 +13,7 @@ model = "TI OMAP2420 H4 board"; compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; /* 64 MB */ }; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index db95aadcca70..7e5ffc583c90 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -1,7 +1,7 @@ #include "omap2420.dtsi" / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts index 6b36ede58488..4f7d9d7c00c7 100644 --- a/arch/arm/boot/dts/omap2430-sdp.dts +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -13,7 +13,7 @@ model = "TI OMAP2430 SDP"; compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 8ffde06281ad..85e297ed0ea1 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -19,7 +19,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index a19d907d4850..4be85ce59dd1 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -19,7 +19,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 6a0df13fa0f3..57b9a028a49a 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -4,7 +4,7 @@ / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 586010179752..f330c69cc683 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -10,7 +10,7 @@ #include "omap34xx.dtsi" / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index ed449827c3d3..4f9a76544602 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -15,7 +15,7 @@ model = "TI OMAP37XX EVM (TMDSEVM3730)"; compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index e10dcd0fa539..99b2bfcd1059 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -14,7 +14,7 @@ model = "TI OMAP35XX EVM (TMDSEVM3530)"; compatible = "ti,omap3-evm", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index c09a0574af90..5563e2533ebd 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -21,7 +21,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index f4f2ce46d681..54c4c07bbe4a 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -13,7 +13,7 @@ #include "omap36xx.dtsi" / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 2f353dadfa40..e28fe13cb007 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -15,7 +15,7 @@ model = "TI OMAP3430 LDP (Zoom1 Labrador)"; compatible = "ti,omap3-ldp", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index eff816e0bc0a..fa611a5e4850 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -17,7 +17,7 @@ bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 2a6078a8422c..87ca50b53002 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -54,7 +54,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 927b17fc4ed8..5d8c4b4a4205 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -24,12 +24,12 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; - vemmc: fixedregulator@0 { + vemmc: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "VEMMC"; regulator-min-microvolt = <2900000>; @@ -39,7 +39,7 @@ enable-active-high; }; - vwlan_fixed: fixedregulator@2 { + vwlan_fixed: fixedregulator2 { compatible = "regulator-fixed"; regulator-name = "VWLAN"; gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */ diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi index 3b3a75997f81..99a7eee6e61f 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi @@ -44,7 +44,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&button_pins>; - button0@10 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */ diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index de256fa8da48..401fae838fe9 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -11,6 +11,12 @@ */ / { + + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; + pwmleds { compatible = "pwm-leds"; @@ -223,7 +229,9 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>; + ranges = <0 0 0x30000000 0x1000000>, /* CS0 */ + <4 0 0x2b000000 0x1000000>, /* CS4 */ + <5 0 0x2c000000 0x1000000>; /* CS5 */ nand@0,0 { compatible = "ti,omap2-nand"; diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 7df27926ead2..56dbd113430e 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -37,13 +37,13 @@ pinctrl-0 = <&button_pins>; #address-cells = <1>; #size-cells = <0>; - button0@23 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ wakeup-source; }; - button1@14 { + button1 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ @@ -55,8 +55,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index ca86da68220c..854117dc0b77 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - lcd0: display { + lcd0: display@1 { compatible = "lgphilips,lb035q02"; label = "lcd35"; diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi index 250cc7fe5d5e..286f5baddf07 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi @@ -37,13 +37,13 @@ pinctrl-0 = <&button_pins>; #address-cells = <1>; #size-cells = <0>; - button0@23 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ wakeup-source; }; - button1@14 { + button1 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi index 8df7ec35d17d..a8020fb42464 100644 --- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi @@ -37,13 +37,13 @@ pinctrl-0 = <&button_pins>; #address-cells = <1>; #size-cells = <0>; - button0@23 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ wakeup-source; }; - button1@14 { + button1 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi index 0ea2c451c809..11965737e2c9 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi @@ -37,13 +37,13 @@ pinctrl-0 = <&button_pins>; #address-cells = <1>; #size-cells = <0>; - button0@23 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ wakeup-source; }; - button1@14 { + button1 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 9e24b6a1d07b..1b304e2f1bd2 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -27,8 +27,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index 334109e14613..82e98ee3023a 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -15,9 +15,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */ - <5 0 0x2c000000 0x1000000>; /* CS5 */ - smsc1: ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index dbc4dc721cc2..53e007abdc71 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -18,7 +18,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; @@ -45,28 +45,28 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - led@1 { + led1 { label = "pandora::sd1"; gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */ linux,default-trigger = "mmc0"; default-state = "off"; }; - led@2 { + led2 { label = "pandora::sd2"; gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */ linux,default-trigger = "mmc1"; default-state = "off"; }; - led@3 { + led3 { label = "pandora::bluetooth"; gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */ linux,default-trigger = "heartbeat"; default-state = "off"; }; - led@4 { + led4 { label = "pandora::wifi"; gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */ linux,default-trigger = "mmc2"; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index 78a1184cb312..bc4498e77bc9 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -20,7 +20,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 644d3c8ea66a..dc80886b5329 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -26,7 +26,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index c29b41dc7b95..45e2ce0803de 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -20,7 +20,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4c3c471d2a83..353d818ce5a6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -12,11 +12,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { compatible = "ti,omap3430", "ti,omap3"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c1; @@ -78,7 +78,7 @@ * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ - ocp { + ocp@68000000 { compatible = "ti,omap3-l3-smx", "simple-bus"; reg = <0x68000000 0x10000>; interrupts = <9 10>; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index a0dc8d854142..abd6921143be 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -13,7 +13,7 @@ model = "TI OMAP3430 SDP"; compatible = "ti,omap3430-sdp", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index e44656258225..e41c52d3b113 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -28,7 +28,7 @@ }; }; - ocp { + ocp@68000000 { omap3_pmx_core2: pinmux@480025d8 { compatible = "ti,omap3-padconf", "pinctrl-single"; reg = <0x480025d8 0x24>; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 8b7979153008..718fa88407cd 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -30,7 +30,7 @@ }; }; - ocp { + ocp@68000000 { uart4: serial@49042000 { compatible = "ti,omap3-uart"; reg = <0x49042000 0x400>; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 6b39808b8313..1b825128a7b9 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -32,7 +32,7 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - button0@121 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index a90b582e4c3f..ec0bd9779e1a 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -12,7 +12,7 @@ model = "Gumstix Duovero"; compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts index 2251bd54e4e6..e3763ac75719 100644 --- a/arch/arm/boot/dts/omap4-kc1.dts +++ b/arch/arm/boot/dts/omap4-kc1.dts @@ -13,7 +13,7 @@ model = "Amazon Kindle Fire (first generation)"; compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index f8f13952cfeb..d48e45bd4b3d 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -8,7 +8,7 @@ #include "elpida_ecb240abacn.dtsi" / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 10d73a784050..d728ec963111 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -14,7 +14,7 @@ model = "TI OMAP4 SDP board"; compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 873cfc87260c..758b6eb7ae43 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -12,7 +12,7 @@ model = "Variscite VAR-SOM-OM44"; compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3fdc51cd0fad..0ced079b7ae3 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -10,11 +10,11 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { compatible = "ti,omap4430", "ti,omap4"; interrupt-parent = <&wakeupgen>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 5196113202a2..d1f5ce3d3651 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -79,7 +79,7 @@ leds { compatible = "gpio-leds"; - led@1 { + led1 { label = "omap5:blue:usr1"; gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index a9765605d53b..c9390fa9c362 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -11,7 +11,7 @@ model = "CompuLab CM-T54"; compatible = "compulab,omap5-cm-t54", "ti,omap5"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x7F000000>; /* 2048 MB */ }; @@ -72,7 +72,7 @@ leds { compatible = "gpio-leds"; - led@1 { + led1 { label = "Heartbeat"; gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */ linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index f75ce02fb398..7aa2b0c813ab 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -13,7 +13,7 @@ model = "IGEPv5"; compatible = "isee,omap5-igep0050", "ti,omap5"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x7f000000>; /* 2032 MB */ }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index a51e60518eb6..5230ca00913a 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -13,7 +13,7 @@ model = "TI OMAP5 uEVM board"; compatible = "ti,omap5-uevm", "ti,omap5"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 84c10195e79b..71a8f5492c8b 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -11,8 +11,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 0abc93e5bb00..6c0038398ef2 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -239,6 +239,45 @@ }; }; }; + + led@48 { + /* + * The keypad LED @0x48 is routed to + * the sensor board where it is + * connected to an infrared LED + * SFH4650 (60mW, @850nm) next to the + * ambient light and proximity sensor + * Capella Microsystems CM3605. + */ + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + label = "pm8058:infrared:proximitysensor"; + default-state = "off"; + }; + led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + label = "pm8058:red"; + default-state = "off"; + }; + led@132 { + /* + * This is actually green too on my + * board, but documented as yellow. + */ + compatible = "qcom,pm8058-led"; + reg = <0x132>; + label = "pm8058:yellow"; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + label = "pm8058:green"; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index 7b05f072bfc2..b72e09506448 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -253,6 +253,7 @@ vddcx-supply = <&pm8921_s3>; v3p3-supply = <&pm8921_l3>; v1p8-supply = <&pm8921_l4>; + dr_mode = "otg"; }; gadget@12500000 { @@ -272,5 +273,19 @@ vqmmc-supply = <&pm8921_s4>; }; }; + + imem@2a03f000 { + compatible = "syscon", "simple-mfd"; + reg = <0x2a03f000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 74a9b6c394f5..1dbe697b2e90 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm APQ8064"; @@ -86,6 +87,92 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&gcc 7>; + coefficients = <1199 0>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&gcc 8>; + coefficients = <1132 0>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&gcc 9>; + coefficients = <1199 0>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&gcc 10>; + coefficients = <1132 0>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 10 0x304>; @@ -559,22 +646,50 @@ compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupts = <192 1>, <193 1>, <194 1>, - <195 1>, <196 1>, <197 1>, - <198 1>, <199 1>, <200 1>, - <201 1>, <202 1>, <203 1>, - <204 1>, <205 1>, <206 1>, - <207 1>, <208 1>, <209 1>, - <210 1>, <211 1>, <212 1>, - <213 1>, <214 1>, <215 1>, - <216 1>, <217 1>, <218 1>, - <219 1>, <220 1>, <221 1>, - <222 1>, <223 1>, <224 1>, - <225 1>, <226 1>, <227 1>, - <228 1>, <229 1>, <230 1>, - <231 1>, <232 1>, <233 1>, - <234 1>, <235 1>; - + interrupts = <192 IRQ_TYPE_NONE>, + <193 IRQ_TYPE_NONE>, + <194 IRQ_TYPE_NONE>, + <195 IRQ_TYPE_NONE>, + <196 IRQ_TYPE_NONE>, + <197 IRQ_TYPE_NONE>, + <198 IRQ_TYPE_NONE>, + <199 IRQ_TYPE_NONE>, + <200 IRQ_TYPE_NONE>, + <201 IRQ_TYPE_NONE>, + <202 IRQ_TYPE_NONE>, + <203 IRQ_TYPE_NONE>, + <204 IRQ_TYPE_NONE>, + <205 IRQ_TYPE_NONE>, + <206 IRQ_TYPE_NONE>, + <207 IRQ_TYPE_NONE>, + <208 IRQ_TYPE_NONE>, + <209 IRQ_TYPE_NONE>, + <210 IRQ_TYPE_NONE>, + <211 IRQ_TYPE_NONE>, + <212 IRQ_TYPE_NONE>, + <213 IRQ_TYPE_NONE>, + <214 IRQ_TYPE_NONE>, + <215 IRQ_TYPE_NONE>, + <216 IRQ_TYPE_NONE>, + <217 IRQ_TYPE_NONE>, + <218 IRQ_TYPE_NONE>, + <219 IRQ_TYPE_NONE>, + <220 IRQ_TYPE_NONE>, + <221 IRQ_TYPE_NONE>, + <222 IRQ_TYPE_NONE>, + <223 IRQ_TYPE_NONE>, + <224 IRQ_TYPE_NONE>, + <225 IRQ_TYPE_NONE>, + <226 IRQ_TYPE_NONE>, + <227 IRQ_TYPE_NONE>, + <228 IRQ_TYPE_NONE>, + <229 IRQ_TYPE_NONE>, + <230 IRQ_TYPE_NONE>, + <231 IRQ_TYPE_NONE>, + <232 IRQ_TYPE_NONE>, + <233 IRQ_TYPE_NONE>, + <234 IRQ_TYPE_NONE>, + <235 IRQ_TYPE_NONE>; gpio-controller; #gpio-cells = <2>; @@ -587,9 +702,18 @@ gpio-controller; #gpio-cells = <2>; interrupts = - <128 1>, <129 1>, <130 1>, <131 1>, - <132 1>, <133 1>, <134 1>, <135 1>, - <136 1>, <137 1>, <138 1>, <139 1>; + <128 IRQ_TYPE_NONE>, + <129 IRQ_TYPE_NONE>, + <130 IRQ_TYPE_NONE>, + <131 IRQ_TYPE_NONE>, + <132 IRQ_TYPE_NONE>, + <133 IRQ_TYPE_NONE>, + <134 IRQ_TYPE_NONE>, + <135 IRQ_TYPE_NONE>, + <136 IRQ_TYPE_NONE>, + <137 IRQ_TYPE_NONE>, + <138 IRQ_TYPE_NONE>, + <139 IRQ_TYPE_NONE>; }; rtc@11d { @@ -611,11 +735,28 @@ }; }; + qfprom: qfprom@700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + tsens_calib: calib { + reg = <0x404 0x10>; + }; + tsens_backup: backup_calib { + reg = <0x414 0x10>; + }; + }; + gcc: clock-controller@900000 { compatible = "qcom,gcc-apq8064"; reg = <0x00900000 0x4000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; #clock-cells = <1>; #reset-cells = <1>; + #thermal-sensor-cells = <1>; }; lcc: clock-controller@28000000 { @@ -712,7 +853,6 @@ reg = <0x12500000 0x400>; interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; status = "disabled"; - dr_mode = "host"; clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 7c2df062a025..39eb7a4ed16a 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -94,6 +94,88 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 7 0xf04>; @@ -150,6 +232,27 @@ reg = <0xf9011000 0x1000>; }; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; + + tsens: thermal-sensor@fc4a8000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a8000 0x2000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #thermal-sensor-cells = <1>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index d501382493e3..348503d1a1c1 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -95,6 +95,7 @@ }; sata@29000000 { + ports-implemented = <0x1>; status = "ok"; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index acbe71febe13..8c65e0d82559 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -159,21 +160,50 @@ "qcom,ssbi-gpio"; reg = <0x150>; interrupt-parent = <&pmicintc>; - interrupts = <192 1>, <193 1>, <194 1>, - <195 1>, <196 1>, <197 1>, - <198 1>, <199 1>, <200 1>, - <201 1>, <202 1>, <203 1>, - <204 1>, <205 1>, <206 1>, - <207 1>, <208 1>, <209 1>, - <210 1>, <211 1>, <212 1>, - <213 1>, <214 1>, <215 1>, - <216 1>, <217 1>, <218 1>, - <219 1>, <220 1>, <221 1>, - <222 1>, <223 1>, <224 1>, - <225 1>, <226 1>, <227 1>, - <228 1>, <229 1>, <230 1>, - <231 1>, <232 1>, <233 1>, - <234 1>, <235 1>; + interrupts = <192 IRQ_TYPE_NONE>, + <193 IRQ_TYPE_NONE>, + <194 IRQ_TYPE_NONE>, + <195 IRQ_TYPE_NONE>, + <196 IRQ_TYPE_NONE>, + <197 IRQ_TYPE_NONE>, + <198 IRQ_TYPE_NONE>, + <199 IRQ_TYPE_NONE>, + <200 IRQ_TYPE_NONE>, + <201 IRQ_TYPE_NONE>, + <202 IRQ_TYPE_NONE>, + <203 IRQ_TYPE_NONE>, + <204 IRQ_TYPE_NONE>, + <205 IRQ_TYPE_NONE>, + <206 IRQ_TYPE_NONE>, + <207 IRQ_TYPE_NONE>, + <208 IRQ_TYPE_NONE>, + <209 IRQ_TYPE_NONE>, + <210 IRQ_TYPE_NONE>, + <211 IRQ_TYPE_NONE>, + <212 IRQ_TYPE_NONE>, + <213 IRQ_TYPE_NONE>, + <214 IRQ_TYPE_NONE>, + <215 IRQ_TYPE_NONE>, + <216 IRQ_TYPE_NONE>, + <217 IRQ_TYPE_NONE>, + <218 IRQ_TYPE_NONE>, + <219 IRQ_TYPE_NONE>, + <220 IRQ_TYPE_NONE>, + <221 IRQ_TYPE_NONE>, + <222 IRQ_TYPE_NONE>, + <223 IRQ_TYPE_NONE>, + <224 IRQ_TYPE_NONE>, + <225 IRQ_TYPE_NONE>, + <226 IRQ_TYPE_NONE>, + <227 IRQ_TYPE_NONE>, + <228 IRQ_TYPE_NONE>, + <229 IRQ_TYPE_NONE>, + <230 IRQ_TYPE_NONE>, + <231 IRQ_TYPE_NONE>, + <232 IRQ_TYPE_NONE>, + <233 IRQ_TYPE_NONE>, + <234 IRQ_TYPE_NONE>, + <235 IRQ_TYPE_NONE>; gpio-controller; #gpio-cells = <2>; @@ -187,9 +217,18 @@ #gpio-cells = <2>; interrupt-parent = <&pmicintc>; interrupts = - <128 1>, <129 1>, <130 1>, <131 1>, - <132 1>, <133 1>, <134 1>, <135 1>, - <136 1>, <137 1>, <138 1>, <139 1>; + <128 IRQ_TYPE_NONE>, + <129 IRQ_TYPE_NONE>, + <130 IRQ_TYPE_NONE>, + <131 IRQ_TYPE_NONE>, + <132 IRQ_TYPE_NONE>, + <133 IRQ_TYPE_NONE>, + <134 IRQ_TYPE_NONE>, + <135 IRQ_TYPE_NONE>, + <136 IRQ_TYPE_NONE>, + <137 IRQ_TYPE_NONE>, + <138 IRQ_TYPE_NONE>, + <139 IRQ_TYPE_NONE>; }; pwrkey@1c { diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts new file mode 100644 index 000000000000..c0fb4a698c56 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -0,0 +1,262 @@ +#include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "LGE MSM 8974 HAMMERHEAD"; + compatible = "lge,hammerhead", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + smd { + rpm { + rpm_requests { + pm8841-regulators { + s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; + }; + }; + + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; +}; + +&soc { + serial@f991d000 { + status = "ok"; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; +}; + +&spmi_bus { + pm8941@0 { + gpios@c000 { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 3fb4dada6b0d..e7c1577d56f4 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -257,23 +257,6 @@ }; }; }; - - vreg_boost: vreg-boost { - compatible = "regulator-fixed"; - - regulator-name = "vreg-boost"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - regulator-always-on; - regulator-boot-on; - - gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&boost_bypass_n_pin>; - }; }; &soc { @@ -311,6 +294,45 @@ pinctrl-0 = <&blsp1_uart2_pin_a>; }; + i2c@f9924000 { + status = "ok"; + + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; + }; + pinctrl@fd510000 { blsp1_uart2_pin_a: blsp1-uart2-pin-active { rx { @@ -330,6 +352,16 @@ }; }; + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + sdhc1_pin_a: sdhc1-pin-active { clk { pins = "sdc1_clk"; @@ -366,6 +398,16 @@ }; }; + ts_int_pin: touch-int { + pin { + pins = "gpio61"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; }; dma-controller@f9944000 { @@ -387,11 +429,6 @@ }; gpios@c000 { - boost_bypass_n_pin: boost-bypass { - pins = "gpio21"; - function = "normal"; - }; - gpio_keys_pin_a: gpio-keys-active { pins = "gpio2", "gpio3", "gpio4", "gpio5"; function = "normal"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 561d4d136762..d2109475bdfd 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -2,6 +2,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/gpio/gpio.h> #include "skeleton.dtsi" / { @@ -131,6 +132,88 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 7 0xf04>; @@ -287,6 +370,27 @@ reg = <0xf9011000 0x1000>; }; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; + + tsens: thermal-sensor@fc4a8000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a8000 0x2000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #thermal-sensor-cells = <1>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -430,6 +534,15 @@ reg = <0xfc428000 0x4000>; }; + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = <0 107 0x0>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; @@ -615,4 +728,30 @@ }; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index d95edb6f6265..f8eb5e31c920 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -88,6 +88,11 @@ <0 0xe1 0 IRQ_TYPE_NONE>, <0 0xe2 0 IRQ_TYPE_NONE>, <0 0xe3 0 IRQ_TYPE_NONE>; + + boost_bypass_n_pin: boost-bypass { + pins = "gpio21"; + function = "normal"; + }; }; pm8941_mpps: mpps@a000 { diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts new file mode 100644 index 000000000000..e5dea5bb4032 --- /dev/null +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -0,0 +1,61 @@ +/* + * Device Tree Source for the RZ/A1H RSK board + * + * Copyright (C) 2016 Renesas Electronics + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r7s72100.dtsi" + +/ { + model = "RSKRZA1"; + compatible = "renesas,rskrza1", "renesas,r7s72100"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + memory@8000000 { + device_type = "memory"; + reg = <0x08000000 0x02000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&extal_clk { + clock-frequency = <13330000>; +}; + +&usb_x1_clk { + clock-frequency = <48000000>; +}; + +&mtu2 { + status = "okay"; +}; + +ðer { + status = "okay"; + renesas,no-ether-link; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&scif2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index e8e2a5d71976..fb9ef9ca120e 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -108,6 +108,15 @@ clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7"; }; + mstp7_clks: mstp7_clks@fcfe0430 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0430 4>; + clocks = <&p0_clk>; + clock-indices = <R7S72100_CLK_ETHER>; + clock-output-names = "ether"; + }; + mstp9_clks: mstp9_clks@fcfe0438 { #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -419,4 +428,17 @@ power-domains = <&cpg_clocks>; status = "disabled"; }; + + ether: ethernet@e8203000 { + compatible = "renesas,ether-r7s72100"; + reg = <0xe8203000 0x800>, + <0xe8204800 0x200>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R7S72100_CLK_ETHER>; + power-domains = <&cpg_clocks>; + phy-mode = "mii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index d18558f21102..351fcc2f87df 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -944,11 +944,6 @@ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - - renesas,has-sru; - renesas,#rpf = <5>; - renesas,#uds = <1>; - renesas,#wpf = <4>; }; vsp1@fe928000 { @@ -957,12 +952,6 @@ interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - - renesas,has-lut; - renesas,has-sru; - renesas,#rpf = <5>; - renesas,#uds = <3>; - renesas,#wpf = <4>; }; vsp1@fe930000 { @@ -971,12 +960,6 @@ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - - renesas,has-lif; - renesas,has-lut; - renesas,#rpf = <4>; - renesas,#uds = <1>; - renesas,#wpf = <4>; }; vsp1@fe938000 { @@ -985,12 +968,6 @@ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - - renesas,has-lif; - renesas,has-lut; - renesas,#rpf = <4>; - renesas,#uds = <1>; - renesas,#wpf = <4>; }; du: display@feb00000 { diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 8f0086bbd96b..162b55c665a3 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -983,12 +983,6 @@ interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - - renesas,has-lut; - renesas,has-sru; - renesas,#rpf = <5>; - renesas,#uds = <3>; - renesas,#wpf = <4>; }; vsp1@fe930000 { @@ -997,12 +991,6 @@ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - - renesas,has-lif; - renesas,has-lut; - renesas,#rpf = <4>; - renesas,#uds = <1>; - renesas,#wpf = <4>; }; vsp1@fe938000 { @@ -1011,12 +999,6 @@ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - - renesas,has-lif; - renesas,has-lut; - renesas,#rpf = <4>; - renesas,#uds = <1>; - renesas,#wpf = <4>; }; du: display@feb00000 { diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index e7b40f0e7da6..f3ea43b7b724 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -11,6 +11,8 @@ /dts-v1/; #include "r8a7792.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Blanche"; @@ -50,6 +52,139 @@ reg-io-width = <4>; vddvario-supply = <&d3_3v>; vdd33a-supply = <&d3_3v>; + + pinctrl-0 = <&lan89218_pins>; + pinctrl-names = "default"; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + x1_clk: x1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x2_clk: x2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <65000000>; + }; + + keyboard { + compatible = "gpio-keys"; + + key-1 { + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; + }; + key-2 { + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + }; + key-3 { + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + }; + key-4 { + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + }; + key-a { + linux,code = <KEY_A>; + label = "SW24"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + }; + key-b { + linux,code = <KEY_B>; + label = "SW25"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio11 2 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led17 { + gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>; + }; + led18 { + gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>; + }; + led19 { + gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>; + }; + led20 { + gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -57,10 +192,139 @@ clock-frequency = <20000000>; }; +&can_clk { + clock-frequency = <48000000>; +}; + +&pfc { + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif3_pins: scif3 { + groups = "scif3_data"; + function = "scif3"; + }; + + lan89218_pins: lan89218 { + intc { + groups = "intc_irq0"; + function = "intc"; + }; + lbsc { + groups = "lbsc_ex_cs0"; + function = "lbsc"; + }; + }; + + can0_pins: can0 { + groups = "can0_data", "can_clk"; + function = "can0"; + }; + + sdhi0_pins: sdhi0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + }; + + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp"; + function = "du0"; + }; + + du1_pins: du1 { + groups = "du1_rgb666", "du1_sync", "du1_disp"; + function = "du1"; + }; +}; + &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; &scif3 { + pinctrl-0 = <&scif3_pins>; + pinctrl-names = "default"; + status = "okay"; }; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&irqc>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins &du1_pins>; + pinctrl-names = "default"; + + clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>, + <&x1_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts new file mode 100644 index 000000000000..6dbb94114a93 --- /dev/null +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -0,0 +1,199 @@ +/* + * Device Tree Source for the Wheat board + * + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7792.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Wheat"; + compatible = "renesas,wheat", "renesas,r8a7792"; + + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + smsc,save-mac-address; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + + pinctrl-0 = <&lan89218_pins>; + pinctrl-names = "default"; + }; + + keyboard { + compatible = "gpio-keys"; + + key-a { + linux,code = <KEY_A>; + label = "SW2"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + }; + key-b { + linux,code = <KEY_B>; + label = "SW3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio11 2 GPIO_ACTIVE_LOW>; + }; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + lan89218_pins: lan89218 { + intc { + groups = "intc_irq0"; + function = "intc"; + }; + lbsc { + groups = "lbsc_ex_cs0"; + function = "lbsc"; + }; + }; + + can0_pins: can0 { + groups = "can0_data"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data"; + function = "can1"; + }; + + sdhi0_pins: sdhi0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash"; + reg = <0x00440000 0x03bc0000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 3fd61d7ab906..713141d38b3e 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -18,6 +18,22 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + spi0 = &qspi; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; + vin3 = &vin3; + vin4 = &vin4; + vin5 = &vin5; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -108,6 +124,179 @@ #power-domain-cells = <1>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7792"; + reg = <0 0xe6060000 0 0x144>; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO0>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 23>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO1>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO2>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO3>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO4>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO5>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio6: gpio@e6055100 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6055100 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO6>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio7: gpio@e6055200 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6055200 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO7>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio8: gpio@e6055300 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6055300 0 0x50>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 256 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO8>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio9: gpio@e6055400 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 288 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO9>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio10: gpio@e6055500 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6055500 0 0x50>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 320 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO10>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + gpio11: gpio@e6055600 { + compatible = "renesas,gpio-r8a7792", + "renesas,gpio-rcar"; + reg = <0 0xe6055600 0 0x50>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 352 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7792_CLK_GPIO11>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7792", "renesas,rcar-dmac"; @@ -262,6 +451,18 @@ status = "disabled"; }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7792"; + reg = <0 0xee100000 0 0x328>; + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + clocks = <&mstp3_clks R8A7792_CLK_SDHI0>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + jpu: jpeg-codec@fe980000 { compatible = "renesas,jpu-r8a7792", "renesas,rcar-gen2-jpu"; @@ -271,6 +472,242 @@ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7792", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7792_CLK_ETHERAVB>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* I2C doesn't need pinmux */ + i2c0: i2c@e6508000 { + compatible = "renesas,i2c-r8a7792"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7792_CLK_I2C0>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + compatible = "renesas,i2c-r8a7792"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7792_CLK_I2C1>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + compatible = "renesas,i2c-r8a7792"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7792_CLK_I2C2>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + compatible = "renesas,i2c-r8a7792"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7792_CLK_I2C3>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + compatible = "renesas,i2c-r8a7792"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7792_CLK_I2C4>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + compatible = "renesas,i2c-r8a7792"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7792_CLK_I2C5>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7792", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7792_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7792"; + reg = <0 0xfeb00000 0 0x40000>; + reg-names = "du"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_DU0>, + <&mstp7_clks R8A7792_CLK_DU1>; + clock-names = "du.0", "du.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; + }; + }; + + can0: can@e6e80000 { + compatible = "renesas,can-r8a7792", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7792_CLK_CAN0>, + <&rcan_clk>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7792", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7792_CLK_CAN1>, + <&rcan_clk>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7792", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7792_CLK_VIN0>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7792", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7792_CLK_VIN1>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7792", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7792_CLK_VIN2>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a7792", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7792_CLK_VIN3>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a7792", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7792_CLK_VIN4>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a7792", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7792_CLK_VIN5>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vsp1@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7792_CLK_VSP1_SY>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + vsp1@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7792_CLK_VSP1DU0>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + vsp1@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7792_CLK_VSP1DU1>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7792-cpg-clocks", @@ -291,6 +728,13 @@ clock-div = <2>; clock-mult = <1>; }; + zx_clk: zx { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + }; zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7792_CLK_PLL1>; @@ -298,6 +742,13 @@ clock-div = <6>; clock-mult = <1>; }; + hp_clk: hp { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + }; p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7792_CLK_PLL1>; @@ -319,16 +770,42 @@ clock-div = <8>; clock-mult = <1>; }; + sd_clk: sd { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + }; + rcan_clk: rcan { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <49>; + clock-mult = <1>; + }; + zg_clk: zg { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <5>; + clock-mult = <1>; + }; /* Gate clocks */ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7792-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&m2_clk>; + clocks = <&m2_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - clock-indices = <R8A7792_CLK_JPU>; - clock-output-names = "jpu"; + clock-indices = < + R8A7792_CLK_JPU + R8A7792_CLK_VSP1DU1 R8A7792_CLK_VSP1DU0 + R8A7792_CLK_VSP1_SY + >; + clock-output-names = "jpu", "vsp1du1", "vsp1du0", + "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7792-mstp-clocks", @@ -341,6 +818,15 @@ >; clock-output-names = "sys-dmac1", "sys-dmac0"; }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&sd_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7792_CLK_SDHI0>; + clock-output-names = "sdhi0"; + }; mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a7792-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -355,15 +841,65 @@ "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, - <&p_clk>, <&p_clk>; + <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; clock-indices = < R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0 R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2 R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0 + R8A7792_CLK_DU1 R8A7792_CLK_DU0 >; clock-output-names = "hscif1", "hscif0", "scif3", - "scif2", "scif1", "scif0"; + "scif2", "scif1", "scif0", + "du1", "du0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, + <&zg_clk>, <&zg_clk>, <&hp_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7792_CLK_VIN5 R8A7792_CLK_VIN4 + R8A7792_CLK_VIN3 R8A7792_CLK_VIN2 + R8A7792_CLK_VIN1 R8A7792_CLK_VIN0 + R8A7792_CLK_ETHERAVB + >; + clock-output-names = "vin5", "vin4", "vin3", "vin2", + "vin1", "vin0", "etheravb"; + }; + mstp9_clks: mstp9_clks@e6150994 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>, + <&cpg_clocks R8A7792_CLK_QSPI>, + <&cp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7792_CLK_GPIO7 R8A7792_CLK_GPIO6 + R8A7792_CLK_GPIO5 R8A7792_CLK_GPIO4 + R8A7792_CLK_GPIO3 R8A7792_CLK_GPIO2 + R8A7792_CLK_GPIO1 R8A7792_CLK_GPIO0 + R8A7792_CLK_GPIO11 R8A7792_CLK_GPIO10 + R8A7792_CLK_CAN1 R8A7792_CLK_CAN0 + R8A7792_CLK_QSPI_MOD + R8A7792_CLK_GPIO9 R8A7792_CLK_GPIO8 + R8A7792_CLK_I2C5 R8A7792_CLK_I2C4 + R8A7792_CLK_I2C3 R8A7792_CLK_I2C2 + R8A7792_CLK_I2C1 R8A7792_CLK_I2C0 + >; + clock-output-names = + "gpio7", "gpio6", "gpio5", "gpio4", + "gpio3", "gpio2", "gpio1", "gpio0", + "gpio11", "gpio10", "can1", "can0", + "qspi_mod", "gpio9", "gpio8", + "i2c5", "i2c4", "i2c3", "i2c2", + "i2c1", "i2c0"; }; }; @@ -382,4 +918,12 @@ /* This value must be overridden by the board. */ clock-frequency = <0>; }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 1ad37d431a2a..8d1b35afaf82 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "r8a7794.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Alt"; @@ -29,6 +30,63 @@ reg = <0 0x40000000 0 0x40000000>; }; + d3_3v: regulator-d3-3v { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + lbsc { #address-cells = <1>; #size-cells = <1>; @@ -140,6 +198,21 @@ groups = "vin0_data8", "vin0_clk"; function = "vin0"; }; + + mmcif0_pins: mmcif0 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + }; }; &cmt0 { @@ -169,6 +242,39 @@ }; }; +&mmcif0 { + pinctrl-0 = <&mmcif0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&d3_3v>; + vqmmc-supply = <&d3_3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &i2c1 { pinctrl-0 = <&i2c1_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index cf24f45fff22..cf880ac06f4b 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -10,6 +10,17 @@ * kind, whether express or implied. */ +/* + * SSI-AK4643 + * + * SW1: 2-1: AK4643 + * 2-3: ADV7511 + * + * This command is required before playback/capture: + * + * amixer set "LINEOUT Mixer DACL" on + */ + /dts-v1/; #include "r8a7794.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -119,6 +130,29 @@ #clock-cells = <0>; clock-frequency = <74250000>; }; + + x9_clk: audio_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&soundcodec>; + simple-audio-card,frame-master = <&soundcodec>; + + simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + soundcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + clocks = <&x9_clk>; + }; + }; }; &extal_clk { @@ -193,6 +227,16 @@ groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out"; function = "du1"; }; + + ssi_pins: sound { + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; + }; + + audio_clk_pins: audio_clk { + groups = "audio_clkc"; + function = "audio_clk"; + }; }; &scif2 { @@ -230,6 +274,12 @@ status = "okay"; clock-frequency = <400000>; + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; @@ -392,3 +442,23 @@ }; }; }; + +&rcar_sound { + pinctrl-0 = <&ssi_pins &audio_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0>; + capture = <&ssi1>; + }; + }; +}; + +&ssi1 { + shared-pin; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 685f986cf962..9365580a194f 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -296,6 +296,34 @@ dma-channels = <15>; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", + "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + #dma-cells = <1>; + dma-channels = <13>; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7794", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -697,7 +725,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7794"; - reg = <0 0xee100000 0 0x200>; + reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, @@ -866,6 +894,22 @@ }; }; + vsp1@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7794_CLK_VSP1_S>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + }; + + vsp1@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7794_CLK_VSP1_DU0>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + }; + du: display@feb00000 { compatible = "renesas,du-r8a7794"; reg = <0 0xfeb00000 0 0x40000>; @@ -952,6 +996,27 @@ clock-frequency = <0>; }; + /* + * The external audio clocks are configured as 0 Hz fixed + * frequency clocks by default. Boards that provide audio + * clocks should override them. + */ + audio_clka: audio_clka { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkb: audio_clkb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkc: audio_clkc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7794-cpg-clocks", @@ -1183,6 +1248,15 @@ clock-indices = <R8A7794_CLK_IRQC>; clock-output-names = "irqc"; }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; + clocks = <&hp_clk>, <&p_clk>; + #clock-cells = <1>; + clock-indices = <R8A7794_CLK_AUDIO_DMAC0 + R8A7794_CLK_PWM>; + clock-output-names = "audmac0", "pwm"; + }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; @@ -1237,6 +1311,58 @@ "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; + mstp10_clks: mstp10_clks@e6150998 { + compatible = "renesas,r8a7794-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; + clocks = <&p_clk>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&p_clk>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>, + <&mstp10_clks R8A7794_CLK_SCU_ALL>; + #clock-cells = <1>; + clock-indices = <R8A7794_CLK_SSI_ALL + R8A7794_CLK_SSI9 R8A7794_CLK_SSI8 + R8A7794_CLK_SSI7 R8A7794_CLK_SSI6 + R8A7794_CLK_SSI5 R8A7794_CLK_SSI4 + R8A7794_CLK_SSI3 R8A7794_CLK_SSI2 + R8A7794_CLK_SSI1 R8A7794_CLK_SSI0 + R8A7794_CLK_SCU_ALL + R8A7794_CLK_SCU_DVC1 + R8A7794_CLK_SCU_DVC0 + R8A7794_CLK_SCU_CTU1_MIX1 + R8A7794_CLK_SCU_CTU0_MIX0 + R8A7794_CLK_SCU_SRC6 + R8A7794_CLK_SCU_SRC5 + R8A7794_CLK_SCU_SRC4 + R8A7794_CLK_SCU_SRC3 + R8A7794_CLK_SCU_SRC2 + R8A7794_CLK_SCU_SRC1>; + clock-output-names = "ssi-all", "ssi9", "ssi8", "ssi7", + "ssi6", "ssi5", "ssi4", "ssi3", + "ssi2", "ssi1", "ssi0", + "scu-all", "scu-dvc1", "scu-dvc0", + "scu-ctu1-mix1", "scu-ctu0-mix0", + "scu-src6", "scu-src5", "scu-src4", + "scu-src3", "scu-src2", "scu-src1"; + }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; @@ -1306,4 +1432,185 @@ #iommu-cells = <1>; status = "disabled"; }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7794", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>, + <&mstp10_clks R8A7794_CLK_SSI9>, + <&mstp10_clks R8A7794_CLK_SSI8>, + <&mstp10_clks R8A7794_CLK_SSI7>, + <&mstp10_clks R8A7794_CLK_SSI6>, + <&mstp10_clks R8A7794_CLK_SSI5>, + <&mstp10_clks R8A7794_CLK_SSI4>, + <&mstp10_clks R8A7794_CLK_SSI3>, + <&mstp10_clks R8A7794_CLK_SSI2>, + <&mstp10_clks R8A7794_CLK_SSI1>, + <&mstp10_clks R8A7794_CLK_SSI0>, + <&mstp10_clks R8A7794_CLK_SCU_SRC6>, + <&mstp10_clks R8A7794_CLK_SCU_SRC5>, + <&mstp10_clks R8A7794_CLK_SCU_SRC4>, + <&mstp10_clks R8A7794_CLK_SCU_SRC3>, + <&mstp10_clks R8A7794_CLK_SCU_SRC2>, + <&mstp10_clks R8A7794_CLK_SCU_SRC1>, + <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>, + <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>, + <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>, + <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>, + <&mstp10_clks R8A7794_CLK_SCU_DVC0>, + <&mstp10_clks R8A7794_CLK_SCU_DVC1>, + <&audio_clka>, <&audio_clkb>, <&audio_clkc>, + <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.6", "src.5", "src.4", "src.3", "src.2", + "src.1", + "ctu.0", "ctu.1", + "mix.0", "mix.1", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&cpg_clocks>; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix@0 { }; + mix1: mix@1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu@0 { }; + ctu01: ctu@1 { }; + ctu02: ctu@2 { }; + ctu03: ctu@3 { }; + ctu10: ctu@4 { }; + ctu11: ctu@5 { }; + ctu12: ctu@6 { }; + ctu13: ctu@7 { }; + }; + + rcar_sound,src { + src@0 { + status = "disabled"; + }; + src1: src@1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma0 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma0 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma0 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma0 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma0 0x02>, + <&audma0 0x15>, <&audma0 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi@1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma0 0x04>, + <&audma0 0x49>, <&audma0 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi@2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma0 0x06>, + <&audma0 0x63>, <&audma0 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi@3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi@4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi@5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma0 0x0c>, + <&audma0 0x73>, <&audma0 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi@6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma0 0x0e>, + <&audma0 0x75>, <&audma0 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi@7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma0 0x10>, + <&audma0 0x79>, <&audma0 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi@8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma0 0x12>, + <&audma0 0x7b>, <&audma0 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi@9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma0 0x14>, + <&audma0 0x7d>, <&audma0 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/skeleton.dtsi b/arch/arm/boot/dts/skeleton.dtsi index b41d241de2cd..28b81d60b407 100644 --- a/arch/arm/boot/dts/skeleton.dtsi +++ b/arch/arm/boot/dts/skeleton.dtsi @@ -1,4 +1,8 @@ /* + * This file is deprecated, and will be removed once existing users have been + * updated. New dts{,i} files should *not* include skeleton.dtsi, and should + * instead explicitly provide the below nodes only as required. + * * Skeleton device tree; the bare minimum needed to boot; just include and * add a compatible value. The bootloader will typically populate the memory * node. diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index d294e82447a2..55ecfbea905d 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -553,7 +553,6 @@ clock-names = "mmc"; clocks = <&clk_s_c0_flexgen CLK_MMC_0>; bus-width = <8>; - non-removable; }; mmc1: sdhci@09080000 { @@ -608,6 +607,8 @@ clock-names = "ahci_clk"; clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; + ports-implemented = <0x1>; + status = "disabled"; }; @@ -631,6 +632,8 @@ clock-names = "ahci_clk"; clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; + ports-implemented = <0x1>; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index a538ae52d32b..4be681aaf773 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -58,7 +58,7 @@ pio0: gpio@09610000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x100>; @@ -66,7 +66,7 @@ }; pio1: gpio@09611000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x100>; @@ -74,7 +74,7 @@ }; pio2: gpio@09612000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x100>; @@ -82,7 +82,7 @@ }; pio3: gpio@09613000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x100>; @@ -90,7 +90,7 @@ }; pio4: gpio@09614000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x100>; @@ -99,7 +99,7 @@ pio5: gpio@09615000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x100>; @@ -230,6 +230,13 @@ }; }; + pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 { + st,pins { + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + }; + }; + pinctrl_mii1: mii1 { st,pins { txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; @@ -373,7 +380,7 @@ pio10: pio@09200000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x100>; @@ -381,7 +388,7 @@ }; pio11: pio@09201000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x100>; @@ -389,7 +396,7 @@ }; pio12: pio@09202000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x100>; @@ -397,7 +404,7 @@ }; pio13: pio@09203000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x100>; @@ -405,7 +412,7 @@ }; pio14: pio@09204000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x100>; @@ -413,7 +420,7 @@ }; pio15: pio@09205000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x100>; @@ -421,7 +428,7 @@ }; pio16: pio@09206000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x6000 0x100>; @@ -429,7 +436,7 @@ }; pio17: pio@09207000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x7000 0x100>; @@ -437,7 +444,7 @@ }; pio18: pio@09208000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x8000 0x100>; @@ -445,7 +452,7 @@ }; pio19: pio@09209000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x9000 0x100>; @@ -523,6 +530,13 @@ scl = <&pio15 5 ALT2 BIDIR>; }; }; + + pinctrl_i2c2_alt2_1: i2c2-alt2-1 { + st,pins { + sda = <&pio12 6 ALT2 BIDIR>; + scl = <&pio12 5 ALT2 BIDIR>; + }; + }; }; i2c3 { @@ -916,6 +930,15 @@ interrupt-names = "irqmux"; ranges = <0 0x09210000 0x10000>; + pio20: pio@09210000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO20"; + }; + tsin4 { pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 { st,pins { @@ -927,15 +950,6 @@ }; }; }; - - pio20: pio@09210000 { - gpio-controller; - #gpio-cells = <1>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0x100>; - st,bank-name = "PIO20"; - }; }; pin-controller-rear { @@ -951,7 +965,7 @@ pio30: gpio@09220000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x100>; @@ -959,7 +973,7 @@ }; pio31: gpio@09221000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x100>; @@ -967,7 +981,7 @@ }; pio32: gpio@09222000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x100>; @@ -975,7 +989,7 @@ }; pio33: gpio@09223000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x100>; @@ -983,7 +997,7 @@ }; pio34: gpio@09224000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x100>; @@ -991,7 +1005,7 @@ }; pio35: gpio@09225000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x100>; @@ -1090,7 +1104,7 @@ pio40: gpio@09230000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0 0x100>; @@ -1098,7 +1112,7 @@ }; pio41: gpio@09231000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x100>; @@ -1106,7 +1120,7 @@ }; pio42: gpio@09232000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x100>; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts new file mode 100644 index 000000000000..94e064f193b2 --- /dev/null +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -0,0 +1,190 @@ +/* + * Copyright (C) 2016 STMicroelectronics (R&D) Limited. + * Author: Patrice Chotard <patrice.chotard@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "stih410.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "STiH410 B2260"; + compatible = "st,stih410-b2260", "st,stih410"; + + chosen { + bootargs = "console=ttyAS1,115200"; + linux,stdout-path = &uart1; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + + aliases { + ttyAS1 = &uart1; + ethernet0 = ðernet0; + }; + + soc { + + leds { + compatible = "gpio-leds"; + user_green_1 { + label = "User_green_1"; + gpios = <&pio1 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + user_green_2 { + label = "User_green_2"; + gpios = <&pio4 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + user_green_3 { + label = "User_green_3"; + gpios = <&pio2 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + user_green_4 { + label = "User_green_4"; + gpios = <&pio2 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + /* Low speed expansion connector */ + uart0: serial@9830000 { + label = "LS-UART0"; + status = "okay"; + }; + + /* Low speed expansion connector */ + uart1: serial@9831000 { + label = "LS-UART1"; + status = "okay"; + }; + + /* Low speed expansion connector */ + spi0: spi@9844000 { + label = "LS-SPI0"; + cs-gpio = <&pio30 3 0>; + status = "okay"; + }; + + /* Low speed expansion connector */ + i2c0: i2c@9840000 { + label = "LS-I2C0"; + status = "okay"; + }; + + /* Low speed expansion connector */ + i2c1: i2c@9841000 { + label = "LS-I2C1"; + status = "okay"; + }; + + /* high speed expansion connector */ + i2c2: i2c@9842000 { + label = "HS-I2C2"; + pinctrl-0 = <&pinctrl_i2c2_alt2_1>; + status = "okay"; + }; + + /* high speed expansion connector */ + i2c3: i2c@9843000 { + label = "HS-I2C3"; + pinctrl-0 = <&pinctrl_i2c3_alt3_0>; + status = "okay"; + }; + + mmc0: sdhci@09060000 { + pinctrl-0 = <&pinctrl_sd0>; + bus-width = <4>; + status = "okay"; + }; + + /* high speed expansion connector */ + mmc1: sdhci@09080000 { + status = "okay"; + }; + + pwm0: pwm@9810000 { + status = "okay"; + }; + + pwm1: pwm@9510000 { + status = "okay"; + }; + + usb2_picophy1: phy2 { + status = "okay"; + }; + + usb2_picophy2: phy3 { + status = "okay"; + }; + + ohci0: usb@9a03c00 { + status = "okay"; + }; + + ehci0: usb@9a03e00 { + status = "okay"; + }; + + ohci1: usb@9a83c00 { + status = "okay"; + }; + + ehci1: usb@9a83e00 { + status = "okay"; + }; + + ethernet0: dwmac@9630000 { + phy-mode = "rgmii"; + pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>; + + snps,phy-bus-name = "stmmac"; + snps,phy-bus-id = <0>; + snps,phy-addr = <0>; + snps,reset-gpio = <&pio0 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + + status = "okay"; + }; + + /* SSC11 to HDMI */ + hdmiddc: i2c@9541000 { + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; + status = "okay"; + }; + + sti-display-subsystem { + sti_hdmi: sti-hdmi@8d04000 { + status = "okay"; + }; + }; + + miphy28lp_phy: miphy28lp@9b22000 { + + phy_port1: port@9b2a000 { + st,osc-force-ext; + }; + }; + + sata1: sata@9b28000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 18ed1ad10d32..7590721e9e97 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -227,5 +227,13 @@ clock-names = "bdisp"; clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; }; + + thermal@91a0000 { + compatible = "st,stih407-thermal"; + reg = <0x91a0000 0x28>; + clock-names = "thermal"; + clocks = <&clk_sysin>; + interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + }; }; }; diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 772d2bb07e5f..438e54c585b1 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "stih418.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "STiH418 B2199"; compatible = "st,stih418-b2199", "st,stih418"; @@ -35,14 +36,12 @@ leds { compatible = "gpio-leds"; red { - #gpio-cells = <2>; label = "Front Panel LED"; - gpios = <&pio4 1 0>; + gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; green { - #gpio-cells = <2>; - gpios = <&pio1 3 0>; + gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; @@ -86,6 +85,7 @@ sd-uhs-sdr50; sd-uhs-sdr104; sd-uhs-ddr50; + non-removable; }; miphy28lp_phy: miphy28lp@9b22000 { diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index 487d7d87dbef..322e0e95176c 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -7,6 +7,7 @@ * publishhed by the Free Software Foundation. */ #include "stih41x-b2020x.dtsi" +#include <dt-bindings/gpio/gpio.h> / { memory{ device_type = "memory"; @@ -30,13 +31,12 @@ leds { compatible = "gpio-leds"; red { - #gpio-cells = <1>; label = "Front Panel LED"; - gpios = <&pio4 1>; + gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; green { - gpios = <&pio4 7>; + gpios = <&pio4 7 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 133375bc8aa5..0b0dd024f72d 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -65,6 +65,7 @@ }; mmc0: sdhci@09060000 { + non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 35df462559ca..8e69328c00e4 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -45,6 +45,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index f3cb297fd1db..5f98582232d6 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -121,10 +121,6 @@ status = "okay"; }; -&ohci1 { - status = "okay"; -}; - &otg_sram { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts new file mode 100644 index 000000000000..b1e2afd9de52 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts @@ -0,0 +1,51 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sun5i-reference-design-tablet.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Empire Electronix M712 tablet"; + compatible = "empire-electronix,m712", "allwinner,sun5i-a13"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts index 1b11ec95ae53..439ae3b537df 100644 --- a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts +++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts @@ -42,171 +42,9 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun5i-reference-design-tablet.dtsi" / { model = "INet-98V Rev 02"; compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13"; - - aliases { - serial0 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -®_usb0_vbus { - gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_ldo3>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index f694482bdeb6..b68a12374b35 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -64,6 +64,16 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + status { + label = "chip:white:status"; + gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; }; &be0 { diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts index e182eec6d878..882a4d89fa22 100644 --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts @@ -42,32 +42,11 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun6i-reference-design-tablet.dtsi" / { model = "Colorfly E708 Q1 tablet"; compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc3>; -}; - -&ehci0 { - /* rtl8188etv wifi is connected here */ - status = "okay"; }; &lradc { @@ -82,103 +61,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; - status = "okay"; -}; - -&pio { - mma8452_int_e708_q1: mma8452_int_pin@0 { - allwinner,pins = "PA9"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&p2wi { - status = "okay"; - - axp22x: pmic@68 { - compatible = "x-powers,axp221"; - reg = <0x68>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -#include "axp22x.dtsi" - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpus"; /* This is an educated guess */ -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-gpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc4 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-sys-dll"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_dldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - ®_dldo2 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -186,23 +68,5 @@ }; &simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; vcc-pg-supply = <®_dldo2>; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp221 pmic on the board. - * - * Once we have axp221 power-supply and vbus-usb support we should switch - * to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_dldo1>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts new file mode 100644 index 000000000000..e584e6b186a7 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts @@ -0,0 +1,100 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sun6i-reference-design-tablet.dtsi" + +/ { + model = "iNet Q972 tablet"; + compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ + touchscreen-size-x = <768>; + touchscreen-size-y = <1024>; + touchscreen-swapped-x-y; + }; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@200 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <200000>; + }; + + button@900 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <900000>; + }; + + button@1200 { + label = "Back"; + linux,code = <KEY_BACK>; + channel = <0>; + voltage = <1200000>; + }; +}; + +&ohci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi new file mode 100644 index 000000000000..0c434304e040 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -0,0 +1,193 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +&ehci0 { + /* Wifi is connected here */ + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + drivevbus-supply = <®_vcc5v0>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_dldo1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 7e05e09e61c7..6d6509c71009 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -239,6 +239,14 @@ "mmc2_sample"; }; + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>; + clock-output-names = "nand"; + }; + usb_clk: clk@01c200cc { #clock-cells = <1>; #reset-cells = <1>; @@ -322,6 +330,19 @@ #size-cells = <0>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + resets = <&ahb1_rst 13>; + reset-names = "ahb"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ehci0: usb@01c1a000 { compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts index b2ce284a65a2..f27ebbbeac09 100644 --- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts +++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts @@ -42,70 +42,18 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "Allwinner GT90H Dual Core Tablet (v4)"; compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_gt90h>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ehci0 { status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - &lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; - button@600 { label = "Back"; linux,code = <KEY_BACK>; @@ -114,144 +62,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>; - vmmc-supply = <®_aldo1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - bl_en_pin_gt90h: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_gt90h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_dldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - &usbphy { usb1_vbus-supply = <®_dldo1>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts index e3004428e7a7..4789aac89955 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -47,4 +47,46 @@ / { model = "Polaroid MID2407PXE03 tablet"; compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23"; + + aliases { + ethernet0 = &esp8089; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwrseq_pin_mid2407>; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ + /* The esp8089 needs 200 ms after driving wifi-en high */ + post-power-on-delay-ms = <200>; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + esp8089: sdio_wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + esp,crystal-26M-en = <2>; + }; +}; + +&mmc1_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&r_pio { + wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 { + allwinner,pins = "PL6"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts index 6d06e24d446b..c9213caf7424 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -47,4 +47,46 @@ / { model = "Polaroid MID2809PXE04 tablet"; compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23"; + + aliases { + ethernet0 = &esp8089; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwrseq_pin_mid2809>; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ + /* The esp8089 needs 200 ms after driving wifi-en high */ + post-power-on-delay-ms = <200>; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + esp8089: sdio_wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + esp,crystal-26M-en = <2>; + }; +}; + +&mmc1_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&r_pio { + wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 { + allwinner,pins = "PL6"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts index 65660324005c..de6269dcac3a 100644 --- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts @@ -47,6 +47,11 @@ / { model = "Allwinner GA10H Quad Core Tablet (v1.1)"; compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33"; + + aliases { + /* Make u-boot set mac-address for rtl8703as (no eeprom) */ + ethernet0 = &rtl8703as; + }; }; &ehci0 { @@ -62,6 +67,19 @@ }; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_dldo1>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8703as: sdio_wifi@1 { + reg = <1>; + }; +}; + &ohci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts new file mode 100644 index 000000000000..0f52cd9dfa41 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts @@ -0,0 +1,88 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sun8i-reference-design-tablet.dtsi" + +/ { + model = "INet-D978 Rev 02"; + compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_d978>; + + home { + label = "d978:blue:home"; + gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + }; + }; +}; + +&mmc1_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_dldo1>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: sdio_wifi@1 { + reg = <1>; + }; +}; + +&r_pio { + led_pin_d978: led_pin_d978@0 { + allwinner,pins = "PL5"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts new file mode 100644 index 000000000000..9ea637e82b2d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2016 - Stefan Mavrodiev <stefan.mavrodiev@gmail.com> + * Olimex LTD. <support@olimex.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Olimex A33-OLinuXino"; + compatible = "olimex,a33-olinuxino","allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_olinuxino>; + + green { + label = "a33-olinuxino:green:usr"; + gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + led_pin_olinuxino: led_pins@0 { + allwinner,pins = "PB7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts new file mode 100644 index 000000000000..3d64cafc1e90 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2016 James Pettigrew <james@innovum.com.au> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "FriendlyARM NanoPi NEO"; + compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + pwr { + label = "nanopi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status { + label = "nanopi:blue:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ + }; + }; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&pio { + leds_opc: led-pins { + allwinner,pins = "PA10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led-pins { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index f93f5d1695c4..f89fe00ddec5 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -54,6 +54,8 @@ aliases { serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &rtl8189; }; chosen { @@ -131,6 +133,14 @@ bus-width = <4>; non-removable; status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + rtl8189: sdio_wifi@1 { + reg = <1>; + }; }; &pio { diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts new file mode 100644 index 000000000000..1550fee1ec68 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi Lite"; + compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3"; + + aliases { + /* The H3 emac is not used so the wifi is ethernet0 */ + ethernet0 = &rtl8189ftv; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + pwr_led { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw4 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + rtl8189ftv: sdio_wifi@1 { + reg = <1>; + }; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts new file mode 100644 index 000000000000..851fd2c2cc8c --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* The Orange Pi PC Plus is an extended version of the regular PC */ +#include "sun8i-h3-orangepi-pc.dts" + +/ { + model = "Xunlong Orange Pi PC Plus"; + compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3"; + + aliases { + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &rtl8189ftv; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + rtl8189ftv: sdio_wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + /* eMMC is missing pull-ups */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index b0cb41787e09..bb585918cf54 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -44,7 +44,7 @@ #include "sun8i-h3-orangepi-2.dts" / { - model = "Xunlong Orange Pi Plus"; + model = "Xunlong Orange Pi Plus / Plus 2"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; reg_usb3_vbus: usb3-vbus { diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts new file mode 100644 index 000000000000..5851a47a3089 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The Orange Pi Plus 2E is an extended version of the Orange Pi PC Plus, + * with 2G RAM and an external gbit ethernet phy. + */ + +#include "sun8i-h3-orangepi-pc-plus.dts" + +/ { + model = "Xunlong Orange Pi Plus 2E"; + compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index fdf9fdbda267..6d83b8674201 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -389,6 +389,14 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; }; + pwm: pwm@01c21400 { + compatible = "allwinner,sun8i-h3-pwm"; + reg = <0x01c21400 0x8>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 60fa9585022b..29f837a47771 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -42,10 +42,59 @@ #include "sunxi-reference-design-tablet.dtsi" #include "sun8i-reference-design-tablet.dtsi" +/ { + aliases { + serial0 = &r_uart; + /* Make u-boot set mac-address for wifi without an eeprom */ + ethernet0 = &sdio_wifi; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + /* + * Q8 boards use various PL# pins as wifi-en. On other boards + * these may be connected to a wifi module output pin. To avoid + * short-circuits we configure these as inputs with pull-ups via + * pinctrl, instead of listing them as active-low reset-gpios. + */ + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwrseq_pin_q8>; + /* The esp8089 needs 200 ms after driving wifi-en high */ + post-power-on-delay-ms = <200>; + }; +}; + &ehci0 { status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: sdio_wifi@1 { + reg = <1>; + }; +}; + +&mmc1_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&r_pio { + wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { + allwinner,pins = "PL6", "PL7", "PL11"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + &usbphy { usb1_vbus-supply = <®_dldo1>; }; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 9d9036140511..08cd00143635 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -63,6 +63,25 @@ }; }; +&i2c0 { + /* + * The gsl1680 is rated at 400KHz and it will not work reliable at + * 100KHz, this has been confirmed on multiple different q8 tablets. + * The gsl1680 is the only device on this bus. + */ + clock-frequency = <400000>; + + touchscreen: touchscreen@0 { + interrupt-parent = <&pio>; + interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_power_pin>; + power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + /* Tablet dts must provide reg and compatible */ + status = "disabled"; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; @@ -88,6 +107,13 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + ts_power_pin: ts_power_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { allwinner,pins = "PH8"; allwinner,function = "gpio_in"; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 1526b41c70f1..04b014603659 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -103,6 +103,11 @@ allwinner,drive = <SUN4I_PINCTRL_40_MA>; }; +&osc32k { + /* osc32k input is from AC100 */ + clocks = <&ac100_rtc 0>; +}; + &pio { led_pins_cubieboard4: led-pins@0 { allwinner,pins = "PH6", "PH17"; @@ -250,6 +255,30 @@ }; }; }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; + }; + }; }; #include "axp809.dtsi" diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 7fd22e888602..fd874ded890e 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -152,6 +152,11 @@ status = "okay"; }; +&osc32k { + /* osc32k input is from AC100 */ + clocks = <&ac100_rtc 0>; +}; + &pio { led_pins_optimus: led-pins@0 { allwinner,pins = "PH0", "PH1"; @@ -322,6 +327,30 @@ }; }; }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; + }; + }; }; #include "axp809.dtsi" diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index f68b3242b33a..3c5214cbe4e6 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -148,15 +148,14 @@ /* * The 32k clock is from an external source, normally the - * AC100 codec/RTC chip. This clock is by default enabled - * and clocked at 32768 Hz, from the oscillator connected - * to the AC100. It is configurable, but no such driver or - * bindings exist yet. + * AC100 codec/RTC chip. This serves as a placeholder for + * board dts files to specify the source. */ osc32k: osc32k_clk { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; clock-output-names = "osc32k"; }; @@ -899,8 +898,7 @@ resets = <&apbs_rst 0>; gpio-controller; interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; + #interrupt-cells = <3>; #gpio-cells = <3>; r_ir_pins: r_ir { diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index e52b82449a79..6403e0de540e 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1382,7 +1382,7 @@ * Pin 41: BR_UART1_TXD * Pin 44: BR_UART1_RXD */ - serial@70006000 { + serial@0,70006000 { compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; status = "okay"; }; @@ -1394,7 +1394,7 @@ * Pin 71: UART2_CTS_L * Pin 74: UART2_RTS_L */ - serial@70006040 { + serial@0,70006040 { compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi index 03f60ec340b5..8c8a85176b64 100644 --- a/arch/arm/boot/dts/uniphier-common32.dtsi +++ b/arch/arm/boot/dts/uniphier-common32.dtsi @@ -1,7 +1,8 @@ /* * Device Tree Source commonly used by UniPhier ARM SoCs * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -45,6 +46,11 @@ /include/ "skeleton.dtsi" / { + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { refclk: ref { #clock-cells = <0>; @@ -66,7 +72,7 @@ interrupts = <0 33 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart_clk>; + clocks = <&peri_clk 0>; }; serial1: serial@54006900 { @@ -76,7 +82,7 @@ interrupts = <0 35 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart_clk>; + clocks = <&peri_clk 1>; }; serial2: serial@54006a00 { @@ -86,7 +92,7 @@ interrupts = <0 37 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - clocks = <&uart_clk>; + clocks = <&peri_clk 2>; }; serial3: serial@54006b00 { @@ -96,7 +102,7 @@ interrupts = <0 177 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - clocks = <&uart_clk>; + clocks = <&peri_clk 3>; }; system_bus: system-bus@58c00000 { @@ -114,6 +120,34 @@ reg = <0x59801000 0x400>; }; + mioctrl@59810000 { + compatible = "socionext,uniphier-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + mio_clk: clock { + #clock-cells = <1>; + }; + + mio_rst: reset { + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + #clock-cells = <1>; + }; + + peri_rst: reset { + #reset-cells = <1>; + }; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; @@ -137,11 +171,26 @@ }; soc-glue@5f800000 { - compatible = "simple-mfd", "syscon"; + compatible = "socionext,uniphier-soc-glue", + "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; pinctrl: pinctrl { - /* specify compatible in each SoC DTSI */ + /* specify compatible in each SoC DTSI */ + }; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + sys_clk: clock { + #clock-cells = <1>; + }; + + sys_rst: reset { + #reset-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index ec94b7a661f2..110031bc0e7e 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-LD4 Reference Board + * Device Tree Source for UniPhier LD4 Reference Board * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,13 +44,13 @@ */ /dts-v1/; -/include/ "uniphier-ph1-ld4.dtsi" +/include/ "uniphier-ld4.dtsi" /include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { - model = "UniPhier PH1-LD4 Reference Board"; - compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4"; + model = "UniPhier LD4 Reference Board"; + compatible = "socionext,uniphier-ld4-ref", "socionext,uniphier-ld4"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index debad7ffef05..95f342c9d9c1 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-LD4 SoC + * Device Tree Source for UniPhier LD4 SoC * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -45,7 +46,7 @@ /include/ "uniphier-common32.dtsi" / { - compatible = "socionext,ph1-ld4"; + compatible = "socionext,uniphier-ld4"; cpus { #address-cells = <1>; @@ -55,6 +56,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + enable-method = "psci"; next-level-cache = <&l2>; }; }; @@ -65,18 +67,6 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; - - uart_clk: uart_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <36864000>; - }; - - iobus_clk: iobus_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; }; }; @@ -101,7 +91,7 @@ interrupts = <0 41 1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&iobus_clk>; + clocks = <&peri_clk 4>; clock-frequency = <100000>; }; @@ -114,7 +104,7 @@ interrupts = <0 42 1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&iobus_clk>; + clocks = <&peri_clk 5>; clock-frequency = <100000>; }; @@ -127,7 +117,7 @@ interrupts = <0 43 1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&iobus_clk>; + clocks = <&peri_clk 6>; clock-frequency = <400000>; }; @@ -140,7 +130,7 @@ interrupts = <0 44 1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&iobus_clk>; + clocks = <&peri_clk 7>; clock-frequency = <100000>; }; @@ -151,6 +141,8 @@ interrupts = <0 80 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; }; usb1: usb@5a810100 { @@ -160,6 +152,8 @@ interrupts = <0 81 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; }; usb2: usb@5a820100 { @@ -169,6 +163,8 @@ interrupts = <0 82 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; + resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>; }; }; @@ -181,6 +177,31 @@ interrupts = <0 29 4>; }; +&mio_clk { + compatible = "socionext,uniphier-ld4-mio-clock"; +}; + +&mio_rst { + compatible = "socionext,uniphier-ld4-mio-reset"; + resets = <&sys_rst 7>; +}; + +&peri_clk { + compatible = "socionext,uniphier-ld4-peri-clock"; +}; + +&peri_rst { + compatible = "socionext,uniphier-ld4-peri-reset"; +}; + &pinctrl { compatible = "socionext,uniphier-ld4-pinctrl"; }; + +&sys_clk { + compatible = "socionext,uniphier-ld4-clock"; +}; + +&sys_rst { + compatible = "socionext,uniphier-ld4-reset"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index b8134c6e094b..c05d631dcf02 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-LD6b Reference Board + * Device Tree Source for UniPhier LD6b Reference Board * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,13 +44,13 @@ */ /dts-v1/; -/include/ "uniphier-ph1-ld6b.dtsi" +/include/ "uniphier-ld6b.dtsi" /include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { - model = "UniPhier PH1-LD6b Reference Board"; - compatible = "socionext,ph1-ld6b-ref", "socionext,ph1-ld6b"; + model = "UniPhier LD6b Reference Board"; + compatible = "socionext,uniphier-ld6b-ref", "socionext,uniphier-ld6b"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ld6b.dtsi index 19c107c66bae..905c77d499eb 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi +++ b/arch/arm/boot/dts/uniphier-ld6b.dtsi @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-LD6b SoC + * Device Tree Source for UniPhier LD6b SoC * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,14 +44,14 @@ */ /* - * PH1-LD6b consists of two silicon dies: D-chip and A-chip. - * The D-chip (digital chip) is the same as the ProXstream2 die. - * Reuse the ProXstream2 device tree with some properties overridden. + * LD6b consists of two silicon dies: D-chip and A-chip. + * The D-chip (digital chip) is the same as the PXs2 die. + * Reuse the PXs2 device tree with some properties overridden. */ -/include/ "uniphier-proxstream2.dtsi" +/include/ "uniphier-pxs2.dtsi" / { - compatible = "socionext,ph1-ld6b"; + compatible = "socionext,uniphier-ld6b"; }; /* UART3 unavailable: the pads are not wired to the package balls */ @@ -59,7 +60,7 @@ }; /* - * PH1-LD6b and ProXstream2 have completely different packages, + * LD6b and PXs2 have completely different packages, * which makes the pinctrl driver unshareable. */ &pinctrl { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index d34358632bec..0ab0a40c041e 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-Pro4 Ace Board + * Device Tree Source for UniPhier Pro4 Ace Board * - * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,11 +44,11 @@ */ /dts-v1/; -/include/ "uniphier-ph1-pro4.dtsi" +/include/ "uniphier-pro4.dtsi" / { - model = "UniPhier PH1-Pro4 Ace Board"; - compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4"; + model = "UniPhier Pro4 Ace Board"; + compatible = "socionext,uniphier-pro4-ace", "socionext,uniphier-pro4"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 95f631a3de35..9e92e60d25ce 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-Pro4 Reference Board + * Device Tree Source for UniPhier Pro4 Reference Board * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,13 +44,13 @@ */ /dts-v1/; -/include/ "uniphier-ph1-pro4.dtsi" +/include/ "uniphier-pro4.dtsi" /include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { - model = "UniPhier PH1-Pro4 Reference Board"; - compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4"; + model = "UniPhier Pro4 Reference Board"; + compatible = "socionext,uniphier-pro4-ref", "socionext,uniphier-pro4"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index 7c3a1fcc9f3c..dc4ea8832ce2 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-Pro4 Sanji Board + * Device Tree Source for UniPhier Pro4 Sanji Board * - * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,11 +44,11 @@ */ /dts-v1/; -/include/ "uniphier-ph1-pro4.dtsi" +/include/ "uniphier-pro4.dtsi" / { - model = "UniPhier PH1-Pro4 Sanji Board"; - compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4"; + model = "UniPhier Pro4 Sanji Board"; + compatible = "socionext,uniphier-pro4-sanji", "socionext,uniphier-pro4"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 7b9da0852005..ba700267ad66 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-Pro4 SoC + * Device Tree Source for UniPhier Pro4 SoC * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -45,17 +46,17 @@ /include/ "uniphier-common32.dtsi" / { - compatible = "socionext,ph1-pro4"; + compatible = "socionext,uniphier-pro4"; cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "socionext,uniphier-smp"; cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + enable-method = "psci"; next-level-cache = <&l2>; }; @@ -63,6 +64,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + enable-method = "psci"; next-level-cache = <&l2>; }; }; @@ -73,18 +75,6 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; - - uart_clk: uart_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <73728000>; - }; - - i2c_clk: i2c_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; - }; }; }; @@ -109,7 +99,7 @@ interrupts = <0 41 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 4>; clock-frequency = <100000>; }; @@ -122,7 +112,7 @@ interrupts = <0 42 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 5>; clock-frequency = <100000>; }; @@ -135,7 +125,7 @@ interrupts = <0 43 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 6>; clock-frequency = <100000>; }; @@ -148,7 +138,7 @@ interrupts = <0 44 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 7>; clock-frequency = <100000>; }; @@ -161,7 +151,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 25 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 9>; clock-frequency = <400000>; }; @@ -172,7 +162,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 26 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 10>; clock-frequency = <400000>; }; @@ -183,6 +173,8 @@ interrupts = <0 80 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; }; usb3: usb@5a810100 { @@ -192,6 +184,8 @@ interrupts = <0 81 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb3>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; }; }; @@ -199,6 +193,31 @@ clock-frequency = <25000000>; }; +&mio_clk { + compatible = "socionext,uniphier-pro4-mio-clock"; +}; + +&mio_rst { + compatible = "socionext,uniphier-pro4-mio-reset"; + resets = <&sys_rst 7>; +}; + +&peri_clk { + compatible = "socionext,uniphier-pro4-peri-clock"; +}; + +&peri_rst { + compatible = "socionext,uniphier-pro4-peri-reset"; +}; + &pinctrl { compatible = "socionext,uniphier-pro4-pinctrl"; }; + +&sys_clk { + compatible = "socionext,uniphier-pro4-clock"; +}; + +&sys_rst { + compatible = "socionext,uniphier-pro4-reset"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 7e4aa2fde719..2c49c3614bda 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-Pro5 SoC + * Device Tree Source for UniPhier Pro5 SoC * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -45,17 +46,17 @@ /include/ "uniphier-common32.dtsi" / { - compatible = "socionext,ph1-pro5"; + compatible = "socionext,uniphier-pro5"; cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "socionext,uniphier-smp"; cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + enable-method = "psci"; next-level-cache = <&l2>; }; @@ -63,6 +64,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + enable-method = "psci"; next-level-cache = <&l2>; }; }; @@ -73,18 +75,6 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; - - uart_clk: uart_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <73728000>; - }; - - i2c_clk: i2c_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; - }; }; }; @@ -121,7 +111,7 @@ interrupts = <0 41 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 4>; clock-frequency = <100000>; }; @@ -134,7 +124,7 @@ interrupts = <0 42 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 5>; clock-frequency = <100000>; }; @@ -147,7 +137,7 @@ interrupts = <0 43 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 6>; clock-frequency = <100000>; }; @@ -160,7 +150,7 @@ interrupts = <0 44 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 7>; clock-frequency = <100000>; }; @@ -173,7 +163,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 25 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 9>; clock-frequency = <400000>; }; @@ -184,7 +174,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 26 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 10>; clock-frequency = <400000>; }; }; @@ -193,6 +183,30 @@ clock-frequency = <20000000>; }; +&mio_clk { + compatible = "socionext,uniphier-pro5-mio-clock"; +}; + +&mio_rst { + compatible = "socionext,uniphier-pro5-mio-reset"; +}; + +&peri_clk { + compatible = "socionext,uniphier-pro5-peri-clock"; +}; + +&peri_rst { + compatible = "socionext,uniphier-pro5-peri-reset"; +}; + &pinctrl { compatible = "socionext,uniphier-pro5-pinctrl"; }; + +&sys_clk { + compatible = "socionext,uniphier-pro5-clock"; +}; + +&sys_rst { + compatible = "socionext,uniphier-pro5-reset"; +}; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 98d895b7af1d..373818ace086 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier ProXstream2 Gentil Board + * Device Tree Source for UniPhier PXs2 Gentil Board * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,11 +44,12 @@ */ /dts-v1/; -/include/ "uniphier-proxstream2.dtsi" +/include/ "uniphier-pxs2.dtsi" / { - model = "UniPhier ProXstream2 Gentil Board"; - compatible = "socionext,proxstream2-gentil", "socionext,proxstream2"; + model = "UniPhier PXs2 Gentil Board"; + compatible = "socionext,uniphier-pxs2-gentil", + "socionext,uniphier-pxs2"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 1fb8bd7bb686..51a3eacddfc6 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier ProXstream2 Vodka Board + * Device Tree Source for UniPhier PXs2 Vodka Board * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,11 +44,11 @@ */ /dts-v1/; -/include/ "uniphier-proxstream2.dtsi" +/include/ "uniphier-pxs2.dtsi" / { - model = "UniPhier ProXstream2 Vodka Board"; - compatible = "socionext,proxstream2-vodka", "socionext,proxstream2"; + model = "UniPhier PXs2 Vodka Board"; + compatible = "socionext,uniphier-pxs2-vodka", "socionext,uniphier-pxs2"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index d00d6f5c2668..8789cd518933 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier ProXstream2 SoC + * Device Tree Source for UniPhier PXs2 SoC * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -45,17 +46,17 @@ /include/ "uniphier-common32.dtsi" / { - compatible = "socionext,proxstream2"; + compatible = "socionext,uniphier-pxs2"; cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "socionext,uniphier-smp"; cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + enable-method = "psci"; next-level-cache = <&l2>; }; @@ -63,6 +64,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + enable-method = "psci"; next-level-cache = <&l2>; }; @@ -70,6 +72,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + enable-method = "psci"; next-level-cache = <&l2>; }; @@ -77,6 +80,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + enable-method = "psci"; next-level-cache = <&l2>; }; }; @@ -87,18 +91,6 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; - - uart_clk: uart_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <88900000>; - }; - - i2c_clk: i2c_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; - }; }; }; @@ -123,7 +115,7 @@ interrupts = <0 41 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 4>; clock-frequency = <100000>; }; @@ -136,7 +128,7 @@ interrupts = <0 42 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 5>; clock-frequency = <100000>; }; @@ -149,7 +141,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; interrupts = <0 43 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 6>; clock-frequency = <100000>; }; @@ -162,7 +154,7 @@ interrupts = <0 44 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 7>; clock-frequency = <100000>; }; @@ -173,7 +165,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 45 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 8>; clock-frequency = <400000>; }; @@ -184,7 +176,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 25 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 9>; clock-frequency = <400000>; }; @@ -195,7 +187,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 26 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 10>; clock-frequency = <400000>; }; }; @@ -204,6 +196,30 @@ clock-frequency = <25000000>; }; +&mio_clk { + compatible = "socionext,uniphier-pxs2-mio-clock"; +}; + +&mio_rst { + compatible = "socionext,uniphier-pxs2-mio-reset"; +}; + +&peri_clk { + compatible = "socionext,uniphier-pxs2-peri-clock"; +}; + +&peri_rst { + compatible = "socionext,uniphier-pxs2-peri-reset"; +}; + &pinctrl { compatible = "socionext,uniphier-pxs2-pinctrl"; }; + +&sys_clk { + compatible = "socionext,uniphier-pxs2-clock"; +}; + +&sys_rst { + compatible = "socionext,uniphier-pxs2-reset"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-sld3-ref.dts index acb420492b36..ac792ae07ae0 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld3-ref.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-sLD3 Reference Board + * Device Tree Source for UniPhier sLD3 Reference Board * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,13 +44,13 @@ */ /dts-v1/; -/include/ "uniphier-ph1-sld3.dtsi" +/include/ "uniphier-sld3.dtsi" /include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { - model = "UniPhier PH1-sLD3 Reference Board"; - compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3"; + model = "UniPhier sLD3 Reference Board"; + compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi index 03292f443305..5fa96c939b5c 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-sld3.dtsi @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-sLD3 SoC + * Device Tree Source for UniPhier sLD3 SoC * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -45,17 +46,17 @@ /include/ "skeleton.dtsi" / { - compatible = "socionext,ph1-sld3"; + compatible = "socionext,uniphier-sld3"; cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "socionext,uniphier-smp"; cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + enable-method = "psci"; next-level-cache = <&l2>; }; @@ -63,10 +64,16 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + enable-method = "psci"; next-level-cache = <&l2>; }; }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { refclk: ref { #clock-cells = <0>; @@ -79,18 +86,6 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; - - uart_clk: uart_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <36864000>; - }; - - iobus_clk: iobus_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; }; soc { @@ -139,7 +134,7 @@ status = "disabled"; reg = <0x54006800 0x40>; interrupts = <0 33 4>; - clocks = <&uart_clk>; + clocks = <&sys_clk 0>; fifo-size = <64>; }; @@ -148,7 +143,7 @@ status = "disabled"; reg = <0x54006900 0x40>; interrupts = <0 35 4>; - clocks = <&uart_clk>; + clocks = <&sys_clk 0>; fifo-size = <64>; }; @@ -157,7 +152,7 @@ status = "disabled"; reg = <0x54006a00 0x40>; interrupts = <0 37 4>; - clocks = <&uart_clk>; + clocks = <&sys_clk 0>; fifo-size = <64>; }; @@ -168,7 +163,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 41 1>; - clocks = <&iobus_clk>; + clocks = <&sys_clk 1>; clock-frequency = <100000>; }; @@ -179,7 +174,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 42 1>; - clocks = <&iobus_clk>; + clocks = <&sys_clk 1>; clock-frequency = <100000>; }; @@ -190,7 +185,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 43 1>; - clocks = <&iobus_clk>; + clocks = <&sys_clk 1>; clock-frequency = <100000>; }; @@ -201,7 +196,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 44 1>; - clocks = <&iobus_clk>; + clocks = <&sys_clk 1>; clock-frequency = <100000>; }; @@ -212,7 +207,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 45 1>; - clocks = <&iobus_clk>; + clocks = <&sys_clk 1>; clock-frequency = <400000>; }; @@ -229,6 +224,22 @@ reg = <0x59801000 0x400>; }; + mioctrl@59810000 { + compatible = "socionext,uniphier-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + mio_clk: clock { + compatible = "socionext,uniphier-sld3-mio-clock"; + #clock-cells = <1>; + }; + + mio_rst: reset { + compatible = "socionext,uniphier-sld3-mio-reset"; + #reset-cells = <1>; + }; + }; + usb0: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -256,5 +267,21 @@ reg = <0x5a830100 0x100>; interrupts = <0 83 4>; }; + + sysctrl@f1840000 { + compatible = "socionext,uniphier-sysctrl", + "simple-mfd", "syscon"; + reg = <0xf1840000 0x4000>; + + sys_clk: clock { + compatible = "socionext,uniphier-sld3-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-sld3-reset"; + #reset-cells = <1>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index d594f40e7f76..a8291f988066 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-sLD8 Reference Board + * Device Tree Source for UniPhier sLD8 Reference Board * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,13 +44,13 @@ */ /dts-v1/; -/include/ "uniphier-ph1-sld8.dtsi" +/include/ "uniphier-sld8.dtsi" /include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { - model = "UniPhier PH1-sLD8 Reference Board"; - compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8"; + model = "UniPhier sLD8 Reference Board"; + compatible = "socionext,uniphier-sld8-ref", "socionext,uniphier-sld8"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 467f9d8e9873..d8cf0e7e11ea 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-sLD8 SoC + * Device Tree Source for UniPhier sLD8 SoC * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -45,7 +46,7 @@ /include/ "uniphier-common32.dtsi" / { - compatible = "socionext,ph1-sld8"; + compatible = "socionext,uniphier-sld8"; cpus { #address-cells = <1>; @@ -55,6 +56,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + enable-method = "psci"; next-level-cache = <&l2>; }; }; @@ -65,18 +67,6 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; - - uart_clk: uart_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <80000000>; - }; - - iobus_clk: iobus_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; }; }; @@ -101,7 +91,7 @@ interrupts = <0 41 1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&iobus_clk>; + clocks = <&peri_clk 4>; clock-frequency = <100000>; }; @@ -114,7 +104,7 @@ interrupts = <0 42 1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&iobus_clk>; + clocks = <&peri_clk 5>; clock-frequency = <100000>; }; @@ -127,7 +117,7 @@ interrupts = <0 43 1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&iobus_clk>; + clocks = <&peri_clk 6>; clock-frequency = <400000>; }; @@ -140,7 +130,7 @@ interrupts = <0 44 1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&iobus_clk>; + clocks = <&peri_clk 7>; clock-frequency = <100000>; }; @@ -151,6 +141,8 @@ interrupts = <0 80 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; }; usb1: usb@5a810100 { @@ -160,6 +152,8 @@ interrupts = <0 81 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; }; usb2: usb@5a820100 { @@ -169,6 +163,8 @@ interrupts = <0 82 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; + resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>; }; }; @@ -180,6 +176,31 @@ interrupts = <0 29 4>; }; +&mio_clk { + compatible = "socionext,uniphier-sld8-mio-clock"; +}; + +&mio_rst { + compatible = "socionext,uniphier-sld8-mio-reset"; + resets = <&sys_rst 7>; +}; + +&peri_clk { + compatible = "socionext,uniphier-sld8-peri-clock"; +}; + +&peri_rst { + compatible = "socionext,uniphier-sld8-peri-reset"; +}; + &pinctrl { compatible = "socionext,uniphier-sld8-pinctrl"; }; + +&sys_clk { + compatible = "socionext,uniphier-sld8-clock"; +}; + +&sys_rst { + compatible = "socionext,uniphier-sld8-reset"; +}; diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi index 9ffe2eb68ed4..9f2c731839f2 100644 --- a/arch/arm/boot/dts/vf610m4.dtsi +++ b/arch/arm/boot/dts/vf610m4.dtsi @@ -42,6 +42,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include "skeleton.dtsi" #include "armv7-m.dtsi" #include "vfxxx.dtsi" |
