diff options
Diffstat (limited to 'arch/arm/boot/dts')
24 files changed, 189 insertions, 84 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..5b31c3f6d8e5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -164,6 +164,9 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb +dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \ + pxa910-dkb.dtb \ + mmp2-brownstone.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx1-ads.dtb \ diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index d68b3c4862bc..51416c7d0625 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -122,9 +122,10 @@ interrupts-extended = <&pmc AT91_PMC_LOCKB>; clocks = <&main>; reg = <1>; - atmel,clk-input-range = <1000000 5000000>; + atmel,clk-input-range = <1000000 32000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, + <190000000 240000000 2 1>; }; mck: masterck { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 09664fcf5afb..0e13b4b10a92 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -193,7 +193,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 7f70a39459f6..350208c5e1ed 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "mmp2.dtsi" +#include "mmp2.dtsi" / { model = "Marvell MMP2 Brownstone Development Board"; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 4e8b08c628c7..766bbb8495b6 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -7,7 +7,8 @@ * publishhed by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/clock/marvell,mmp2.h> / { aliases { @@ -135,6 +136,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4030000 0x1000>; interrupts = <27>; + clocks = <&soc_clocks MMP2_CLK_UART0>; + resets = <&soc_clocks MMP2_CLK_UART0>; status = "disabled"; }; @@ -142,6 +145,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4017000 0x1000>; interrupts = <28>; + clocks = <&soc_clocks MMP2_CLK_UART1>; + resets = <&soc_clocks MMP2_CLK_UART1>; status = "disabled"; }; @@ -149,6 +154,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4018000 0x1000>; interrupts = <24>; + clocks = <&soc_clocks MMP2_CLK_UART2>; + resets = <&soc_clocks MMP2_CLK_UART2>; status = "disabled"; }; @@ -156,6 +163,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4016000 0x1000>; interrupts = <46>; + clocks = <&soc_clocks MMP2_CLK_UART3>; + resets = <&soc_clocks MMP2_CLK_UART3>; status = "disabled"; }; @@ -168,6 +177,8 @@ #gpio-cells = <2>; interrupts = <49>; interrupt-names = "gpio_mux"; + clocks = <&soc_clocks MMP2_CLK_GPIO>; + resets = <&soc_clocks MMP2_CLK_GPIO>; interrupt-controller; #interrupt-cells = <1>; ranges; @@ -201,6 +212,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; + clocks = <&soc_clocks MMP2_CLK_TWSI0>; + resets = <&soc_clocks MMP2_CLK_TWSI0>; #address-cells = <1>; #size-cells = <0>; mrvl,i2c-fast-mode; @@ -211,6 +224,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4025000 0x1000>; interrupts = <58>; + clocks = <&soc_clocks MMP2_CLK_TWSI1>; + resets = <&soc_clocks MMP2_CLK_TWSI1>; status = "disabled"; }; @@ -220,8 +235,20 @@ interrupts = <1 0>; interrupt-names = "rtc 1Hz", "rtc alarm"; interrupt-parent = <&intcmux5>; + clocks = <&soc_clocks MMP2_CLK_RTC>; + resets = <&soc_clocks MMP2_CLK_RTC>; status = "disabled"; }; }; + + soc_clocks: clocks{ + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 739fcf29c643..bc82a12d4c2c 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -668,6 +668,8 @@ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; + power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */ + reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */ gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts index e762facb3fa4..0a988b3fb248 100644 --- a/arch/arm/boot/dts/pxa168-aspenite.dts +++ b/arch/arm/boot/dts/pxa168-aspenite.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "pxa168.dtsi" +#include "pxa168.dtsi" / { model = "Marvell PXA168 Aspenite Development Board"; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 975dad21ac38..b899e25cbb1b 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -7,7 +7,8 @@ * publishhed by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/clock/marvell,pxa168.h> / { aliases { @@ -59,6 +60,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4017000 0x1000>; interrupts = <27>; + clocks = <&soc_clocks PXA168_CLK_UART0>; + resets = <&soc_clocks PXA168_CLK_UART0>; status = "disabled"; }; @@ -66,6 +69,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4018000 0x1000>; interrupts = <28>; + clocks = <&soc_clocks PXA168_CLK_UART1>; + resets = <&soc_clocks PXA168_CLK_UART1>; status = "disabled"; }; @@ -73,6 +78,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4026000 0x1000>; interrupts = <29>; + clocks = <&soc_clocks PXA168_CLK_UART2>; + resets = <&soc_clocks PXA168_CLK_UART2>; status = "disabled"; }; @@ -84,6 +91,8 @@ gpio-controller; #gpio-cells = <2>; interrupts = <49>; + clocks = <&soc_clocks PXA168_CLK_GPIO>; + resets = <&soc_clocks PXA168_CLK_GPIO>; interrupt-names = "gpio_mux"; interrupt-controller; #interrupt-cells = <1>; @@ -110,6 +119,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; + clocks = <&soc_clocks PXA168_CLK_TWSI0>; + resets = <&soc_clocks PXA168_CLK_TWSI0>; mrvl,i2c-fast-mode; status = "disabled"; }; @@ -118,6 +129,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4025000 0x1000>; interrupts = <58>; + clocks = <&soc_clocks PXA168_CLK_TWSI1>; + resets = <&soc_clocks PXA168_CLK_TWSI1>; status = "disabled"; }; @@ -126,8 +139,20 @@ reg = <0xd4010000 0x1000>; interrupts = <5 6>; interrupt-names = "rtc 1Hz", "rtc alarm"; + clocks = <&soc_clocks PXA168_CLK_RTC>; + resets = <&soc_clocks PXA168_CLK_RTC>; status = "disabled"; }; }; + + soc_clocks: clocks{ + compatible = "marvell,pxa168-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts index 595492aa5053..c82f2810ec73 100644 --- a/arch/arm/boot/dts/pxa910-dkb.dts +++ b/arch/arm/boot/dts/pxa910-dkb.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "pxa910.dtsi" +#include "pxa910.dtsi" / { model = "Marvell PXA910 DKB Development Board"; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index 0247c622f580..0868f6729be1 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -7,7 +7,8 @@ * publishhed by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/clock/marvell,pxa910.h> / { aliases { @@ -71,6 +72,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4017000 0x1000>; interrupts = <27>; + clocks = <&soc_clocks PXA910_CLK_UART0>; + resets = <&soc_clocks PXA910_CLK_UART0>; status = "disabled"; }; @@ -78,6 +81,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4018000 0x1000>; interrupts = <28>; + clocks = <&soc_clocks PXA910_CLK_UART1>; + resets = <&soc_clocks PXA910_CLK_UART1>; status = "disabled"; }; @@ -85,6 +90,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4036000 0x1000>; interrupts = <59>; + clocks = <&soc_clocks PXA910_CLK_UART2>; + resets = <&soc_clocks PXA910_CLK_UART2>; status = "disabled"; }; @@ -97,6 +104,8 @@ #gpio-cells = <2>; interrupts = <49>; interrupt-names = "gpio_mux"; + clocks = <&soc_clocks PXA910_CLK_GPIO>; + resets = <&soc_clocks PXA910_CLK_GPIO>; interrupt-controller; #interrupt-cells = <1>; ranges; @@ -124,6 +133,8 @@ #size-cells = <0>; reg = <0xd4011000 0x1000>; interrupts = <7>; + clocks = <&soc_clocks PXA910_CLK_TWSI0>; + resets = <&soc_clocks PXA910_CLK_TWSI0>; mrvl,i2c-fast-mode; status = "disabled"; }; @@ -134,6 +145,8 @@ #size-cells = <0>; reg = <0xd4037000 0x1000>; interrupts = <54>; + clocks = <&soc_clocks PXA910_CLK_TWSI1>; + resets = <&soc_clocks PXA910_CLK_TWSI1>; status = "disabled"; }; @@ -142,8 +155,21 @@ reg = <0xd4010000 0x1000>; interrupts = <5 6>; interrupt-names = "rtc 1Hz", "rtc alarm"; + clocks = <&soc_clocks PXA910_CLK_RTC>; + resets = <&soc_clocks PXA910_CLK_RTC>; status = "disabled"; }; }; + + soc_clocks: clocks{ + compatible = "marvell,pxa910-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>, + <0xd403b000 0x1000>; + reg-names = "mpmu", "apmu", "apbc", "apbcp"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 45fce2cf6fed..4472fd92685c 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -547,7 +547,7 @@ status = "disabled"; }; - gpio@ff708000 { + gpio0: gpio@ff708000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -555,7 +555,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio0: gpio-controller@0 { + porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -567,7 +567,7 @@ }; }; - gpio@ff709000 { + gpio1: gpio@ff709000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -575,7 +575,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio1: gpio-controller@0 { + portb: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -587,7 +587,7 @@ }; }; - gpio@ff70a000 { + gpio2: gpio@ff70a000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -595,7 +595,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio2: gpio-controller@0 { + portc: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 03e8268ae219..1907cc600452 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -29,7 +29,7 @@ }; }; - dwmmc0@ff704000 { + mmc0: dwmmc0@ff704000 { num-slots = <1>; broken-cd; bus-width = <4>; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 27d551c384d0..ccaf41742fc3 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -68,6 +75,11 @@ }; }; +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index d7296a5f750c..258865da8f6a 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -53,6 +60,10 @@ rxc-skew-ps = <2000>; }; +&gpio1 { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -69,7 +80,9 @@ }; &mmc0 { - cd-gpios = <&gpio1 18 0>; + cd-gpios = <&portb 18 0>; + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; }; &usb1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index d26f155f5fd9..16ea6f5f2ab8 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: vcc3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -53,6 +60,11 @@ rxc-skew-ps = <2000>; }; +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 380f914b226d..5e2ec2dd8333 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -174,19 +174,11 @@ "apb0_ir1", "apb0_keypad"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 531272c0e526..d2a85144d2d9 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -162,19 +162,11 @@ "apb0_ir", "apb0_keypad"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index b131068f4f35..c35217ea1f64 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -161,19 +161,11 @@ clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 543f895d18d3..4083201e93c8 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -217,19 +217,11 @@ "apb1_daudio1"; }; - apb2_mux: apb2_mux@01c20058 { + apb2: clk@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; - clock-output-names = "apb2_mux"; - }; - - apb2: apb2@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-apb2-div-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb2_mux>; clock-output-names = "apb2"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 82097c905c48..6d996c9e282a 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -222,19 +222,11 @@ "apb0_iis2", "apb0_keypad"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 6146ef15efbe..701960e9d033 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -189,19 +189,11 @@ "apb1_daudio0", "apb1_daudio1"; }; - apb2_mux: apb2_mux_clk@01c20058 { + apb2: clk@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; - clock-output-names = "apb2_mux"; - }; - - apb2: apb2_clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-apb2-div-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb2_mux>; clock-output-names = "apb2"; }; diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index 3fd1b74e1216..de1b453c2932 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -33,6 +33,13 @@ }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + &fec1 { phy-mode = "rmii"; pinctrl-names = "default"; @@ -42,6 +49,18 @@ &iomuxc { vf610-cosmic { + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 24036c440440..ce2ef5bec4f2 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -30,7 +30,6 @@ /* kHz uV */ 666667 1000000 333334 1000000 - 222223 1000000 >; }; @@ -65,7 +64,7 @@ interrupt-parent = <&intc>; ranges; - adc@f8007100 { + adc: adc@f8007100 { compatible = "xlnx,zynq-xadc-1.00.a"; reg = <0xf8007100 0x20>; interrupts = <0 7 4>; @@ -137,7 +136,7 @@ <0xF8F00100 0x100>; }; - L2: cache-controller { + L2: cache-controller@f8f02000 { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; arm,data-latency = <3 2 2>; @@ -146,10 +145,10 @@ cache-level = <2>; }; - memory-controller@f8006000 { + mc: memory-controller@f8006000 { compatible = "xlnx,zynq-ddrc-a05"; reg = <0xf8006000 0x1000>; - } ; + }; uart0: serial@e0000000 { compatible = "xlnx,xuartps", "cdns,uart-r1p8"; @@ -195,7 +194,7 @@ gem0: ethernet@e000b000 { compatible = "cdns,gem"; - reg = <0xe000b000 0x4000>; + reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; @@ -206,7 +205,7 @@ gem1: ethernet@e000c000 { compatible = "cdns,gem"; - reg = <0xe000c000 0x4000>; + reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; @@ -315,5 +314,16 @@ reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; }; + + watchdog0: watchdog@f8005000 { + clocks = <&clkc 45>; + compatible = "xlnx,zynq-wdt-r1p2"; + device_type = "watchdog"; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + reset = <0>; + timeout-sec = <10>; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index e1f51ca127fe..0429bbd89fba 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -34,6 +34,10 @@ }; }; +&clkc { + fclk-enable = <0xf>; +}; + &gem0 { status = "okay"; phy-mode = "rgmii-id"; |
