diff options
Diffstat (limited to 'arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts')
| -rw-r--r-- | arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts | 47 |
1 files changed, 19 insertions, 28 deletions
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts index 0dbdb29a8fff..e1c75f7fa3ca 100644 --- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts @@ -91,6 +91,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -103,13 +105,13 @@ }; &cpu0_opp_table { - opp@1104000000 { + opp-1104000000 { opp-hz = /bits/ 64 <1104000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -124,30 +126,7 @@ status = "okay"; }; -/* This is the i2c bus exposed on the DSI connector for the touch panel */ -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "disabled"; -}; - -/* This is the i2c bus exposed on the GPIO header */ -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "disabled"; -}; - -/* This is the i2c bus exposed on the CSI connector to control the sensor */ -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "disabled"; -}; - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -156,7 +135,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -292,14 +271,26 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo1>; + vddio-supply = <®_aldo3>; + device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + }; }; &usb_otg { |
