diff options
Diffstat (limited to 'arch/arm/boot/dts/omap4-sdp.dts')
| -rw-r--r-- | arch/arm/boot/dts/omap4-sdp.dts | 127 |
1 files changed, 125 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 72216e932fc0..94a23b39033d 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 SDP board"; @@ -18,7 +19,7 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - vdd_eth: fixedregulator@0 { + vdd_eth: fixedregulator-vdd-eth { compatible = "regulator-fixed"; regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; @@ -28,7 +29,7 @@ regulator-boot-on; }; - vbat: fixedregulator@2 { + vbat: fixedregulator-vbat { compatible = "regulator-fixed"; regulator-name = "VBAT"; regulator-min-microvolt = <3750000>; @@ -115,6 +116,33 @@ }; }; +&omap4_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ + 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */ + 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */ + 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */ + 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */ + 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */ + 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */ + 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ + >; + }; +}; + &i2c1 { clock-frequency = <400000>; @@ -226,3 +254,98 @@ bus-width = <4>; ti,non-removable; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x00000012 /* KEY_E */ + 0x00010013 /* KEY_R */ + 0x00020014 /* KEY_T */ + 0x00030066 /* KEY_HOME */ + 0x0004003f /* KEY_F5 */ + 0x000500f0 /* KEY_UNKNOWN */ + 0x00060017 /* KEY_I */ + 0x0007002a /* KEY_LEFTSHIFT */ + 0x01000020 /* KEY_D*/ + 0x01010021 /* KEY_F */ + 0x01020022 /* KEY_G */ + 0x010300e7 /* KEY_SEND */ + 0x01040040 /* KEY_F6 */ + 0x010500f0 /* KEY_UNKNOWN */ + 0x01060025 /* KEY_K */ + 0x0107001c /* KEY_ENTER */ + 0x0200002d /* KEY_X */ + 0x0201002e /* KEY_C */ + 0x0202002f /* KEY_V */ + 0x0203006b /* KEY_END */ + 0x02040041 /* KEY_F7 */ + 0x020500f0 /* KEY_UNKNOWN */ + 0x02060034 /* KEY_DOT */ + 0x0207003a /* KEY_CAPSLOCK */ + 0x0300002c /* KEY_Z */ + 0x0301004e /* KEY_KPLUS */ + 0x03020030 /* KEY_B */ + 0x0303003b /* KEY_F1 */ + 0x03040042 /* KEY_F8 */ + 0x030500f0 /* KEY_UNKNOWN */ + 0x03060018 /* KEY_O */ + 0x03070039 /* KEY_SPACE */ + 0x04000011 /* KEY_W */ + 0x04010015 /* KEY_Y */ + 0x04020016 /* KEY_U */ + 0x0403003c /* KEY_F2 */ + 0x04040073 /* KEY_VOLUMEUP */ + 0x040500f0 /* KEY_UNKNOWN */ + 0x04060026 /* KEY_L */ + 0x04070069 /* KEY_LEFT */ + 0x0500001f /* KEY_S */ + 0x05010023 /* KEY_H */ + 0x05020024 /* KEY_J */ + 0x0503003d /* KEY_F3 */ + 0x05040043 /* KEY_F9 */ + 0x05050072 /* KEY_VOLUMEDOWN */ + 0x05060032 /* KEY_M */ + 0x0507006a /* KEY_RIGHT */ + 0x06000010 /* KEY_Q */ + 0x0601001e /* KEY_A */ + 0x06020031 /* KEY_N */ + 0x0603009e /* KEY_BACK */ + 0x0604000e /* KEY_BACKSPACE */ + 0x060500f0 /* KEY_UNKNOWN */ + 0x06060019 /* KEY_P */ + 0x06070067 /* KEY_UP */ + 0x07000094 /* KEY_PROG1 */ + 0x07010095 /* KEY_PROG2 */ + 0x070200ca /* KEY_PROG3 */ + 0x070300cb /* KEY_PROG4 */ + 0x0704003e /* KEY_F4 */ + 0x070500f0 /* KEY_UNKNOWN */ + 0x07060160 /* KEY_OK */ + 0x0707006c>; /* KEY_DOWN */ + linux,input-no-autorepeat; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; +}; |
