diff options
Diffstat (limited to 'arch/arm/boot/dts/meson8b-odroidc1.dts')
| -rw-r--r-- | arch/arm/boot/dts/meson8b-odroidc1.dts | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 9ff6ca4e20d0..3a5603d95b70 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -54,6 +54,7 @@ aliases { serial0 = &uart_AO; + mmc0 = &sd_card_slot; }; memory { @@ -69,6 +70,37 @@ default-state = "off"; }; }; + + tflash_vdd: regulator-tflash_vdd { + /* + * signal name from schematics: TFLASH_VDD_EN + */ + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + /* + * signal name from schematics: TF_3V3N_1V8_EN + */ + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0 + 1800000 1>; + }; }; &uart_AO { @@ -99,3 +131,59 @@ &usb1 { status = "okay"; }; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + }; +}; + +ðmac { + status = "okay"; + + snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + phy-handle = <ð_phy>; + amlogic,tx-delay-ns = <4>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Realtek RTL8211F (0x001cc916) */ + eth_phy: ethernet-phy@0 { + reg = <0>; + eee-broken-1000t; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; |
