summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/armada-370-rd.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/armada-370-rd.dts')
-rw-r--r--arch/arm/boot/dts/armada-370-rd.dts47
1 files changed, 46 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 4169f4096ea3..f57a8f841498 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -9,6 +9,15 @@
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
*/
/dts-v1/;
@@ -30,7 +39,7 @@
};
soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
pcie-controller {
@@ -50,6 +59,18 @@
};
internal-regs {
+ pinctrl {
+ fan_pins: fan-pins {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+
+ led_pins: led-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+ };
+
serial@12000 {
status = "okay";
};
@@ -59,6 +80,8 @@
};
mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
@@ -74,6 +97,8 @@
phy-mode = "sgmii";
};
ethernet@74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
@@ -106,6 +131,26 @@
};
};
+ gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0 3000 1>;
+ pinctrl-0 = <&fan_pins>;
+ pinctrl-names = "default";
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ sw_led {
+ label = "370rd:green:sw";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+
nand@d0000 {
status = "okay";
num-cs = <1>;
OpenPOWER on IntegriCloud