summaryrefslogtreecommitdiffstats
path: root/arch/arm/Kconfig.debug
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/Kconfig.debug')
-rw-r--r--arch/arm/Kconfig.debug180
1 files changed, 98 insertions, 82 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e0d236d7ff73..85348a09d655 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -81,47 +81,14 @@ choice
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
- config DEBUG_LL_UART_NONE
- bool "No low-level debugging UART"
- help
- Say Y here if your platform doesn't provide a UART option
- below. This relies on your platform choosing the right UART
- definition internally in order for low-level debugging to
- work.
-
- config DEBUG_ICEDCC
- bool "Kernel low-level debugging via EmbeddedICE DCC channel"
- help
- Say Y here if you want the debug print routines to direct
- their output to the EmbeddedICE macrocell's DCC channel using
- co-processor 14. This is known to work on the ARM9 style ICE
- channel and on the XScale with the PEEDI.
-
- Note that the system will appear to hang during boot if there
- is nothing connected to read from the DCC.
-
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config AT91_DEBUG_LL_DBGU1
- bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+ bool "Kernel low-level debugging on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
- config DEBUG_FOOTBRIDGE_COM1
- bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the 8250 at PCI COM1.
-
- config DEBUG_DC21285_PORT
- bool "Kernel low-level debugging messages via footbridge serial port"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port in the DC21285 (Footbridge).
-
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
@@ -136,6 +103,20 @@ choice
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_DC21285_PORT
+ bool "Kernel low-level debugging messages via footbridge serial port"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port in the DC21285 (Footbridge).
+
+ config DEBUG_FOOTBRIDGE_COM1
+ bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the 8250 at PCI COM1.
+
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
@@ -199,45 +180,49 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
- config DEBUG_IMX6Q_UART
- bool "i.MX6Q Debug UART"
+ config DEBUG_IMX6Q_UART4
+ bool "i.MX6Q Debug UART4"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
- on i.MX6Q.
+ on i.MX6Q UART4.
- config DEBUG_S3C_UART0
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 0 for low-level debug"
+ config DEBUG_MSM_UART1
+ bool "Kernel low-level debugging messages via MSM UART1"
+ depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
- their output to UART 0. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ their output to the first serial port on MSM devices.
- config DEBUG_S3C_UART1
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 1 for low-level debug"
+ config DEBUG_MSM_UART2
+ bool "Kernel low-level debugging messages via MSM UART2"
+ depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
- their output to UART 1. The port must have been initialised
- by the boot-loader before use.
+ their output to the second serial port on MSM devices.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ config DEBUG_MSM_UART3
+ bool "Kernel low-level debugging messages via MSM UART3"
+ depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the third serial port on MSM devices.
- config DEBUG_S3C_UART2
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 2 for low-level debug"
+ config DEBUG_MSM8660_UART
+ bool "Kernel low-level debugging messages via MSM 8660 UART"
+ depends on ARCH_MSM8X60
+ select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
- their output to UART 2. The port must have been initialised
- by the boot-loader before use.
+ their output to the serial port on MSM 8660 devices.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ config DEBUG_MSM8960_UART
+ bool "Kernel low-level debugging messages via MSM 8960 UART"
+ depends on ARCH_MSM8960
+ select MSM_HAS_DEBUG_UART_HS
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on MSM 8960 devices.
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
@@ -255,42 +240,73 @@ choice
their output to the standard serial port on the RealView
PB1176 platform.
- config DEBUG_MSM_UART1
- bool "Kernel low-level debugging messages via MSM UART1"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
- their output to the first serial port on MSM devices.
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
- config DEBUG_MSM_UART2
- bool "Kernel low-level debugging messages via MSM UART2"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
- their output to the second serial port on MSM devices.
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
- config DEBUG_MSM_UART3
- bool "Kernel low-level debugging messages via MSM UART3"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
- their output to the third serial port on MSM devices.
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
- config DEBUG_MSM8660_UART
- bool "Kernel low-level debugging messages via MSM 8660 UART"
- depends on ARCH_MSM8X60
- select MSM_HAS_DEBUG_UART_HS
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_LL_UART_NONE
+ bool "No low-level debugging UART"
help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM 8660 devices.
+ Say Y here if your platform doesn't provide a UART option
+ below. This relies on your platform choosing the right UART
+ definition internally in order for low-level debugging to
+ work.
- config DEBUG_MSM8960_UART
- bool "Kernel low-level debugging messages via MSM 8960 UART"
- depends on ARCH_MSM8960
- select MSM_HAS_DEBUG_UART_HS
+ config DEBUG_ICEDCC
+ bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM 8960 devices.
+ their output to the EmbeddedICE macrocell's DCC channel using
+ co-processor 14. This is known to work on the ARM9 style ICE
+ channel and on the XScale with the PEEDI.
+
+ Note that the system will appear to hang during boot if there
+ is nothing connected to read from the DCC.
+
+ config DEBUG_SEMIHOSTING
+ bool "Kernel low-level debug output via semihosting I"
+ help
+ Semihosting enables code running on an ARM target to use
+ the I/O facilities on a host debugger/emulator through a
+ simple SVC calls. The host debugger or emulator must have
+ semihosting enabled for the special svc call to be trapped
+ otherwise the kernel will crash.
+
+ This is known to work with OpenOCD, as wellas
+ ARM's Fast Models, or any other controlling environment
+ that implements semihosting.
+
+ For more details about semihosting, please see
+ chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
endchoice
OpenPOWER on IntegriCloud