diff options
Diffstat (limited to 'Documentation/video4linux/cx2341x/fw-decoder-api.txt')
| -rw-r--r-- | Documentation/video4linux/cx2341x/fw-decoder-api.txt | 319 |
1 files changed, 319 insertions, 0 deletions
diff --git a/Documentation/video4linux/cx2341x/fw-decoder-api.txt b/Documentation/video4linux/cx2341x/fw-decoder-api.txt new file mode 100644 index 000000000000..9df4fb3ea0f2 --- /dev/null +++ b/Documentation/video4linux/cx2341x/fw-decoder-api.txt @@ -0,0 +1,319 @@ +Decoder firmware API description +================================ + +Note: this API is part of the decoder firmware, so it's cx23415 only. + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_PING_FW +Enum 0/0x00 +Description + This API call does nothing. It may be used to check if the firmware + is responding. + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_START_PLAYBACK +Enum 1/0x01 +Description + Begin or resume playback. +Param[0] + 0 based frame number in GOP to begin playback from. +Param[1] + Specifies the number of muted audio frames to play before normal + audio resumes. + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_STOP_PLAYBACK +Enum 2/0x02 +Description + Ends playback and clears all decoder buffers. If PTS is not zero, + playback stops at specified PTS. +Param[0] + Display 0=last frame, 1=black +Param[1] + PTS low +Param[2] + PTS high + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_PLAYBACK_SPEED +Enum 3/0x03 +Description + Playback stream at speed other than normal. There are two modes of + operation: + Smooth: host transfers entire stream and firmware drops unused + frames. + Coarse: host drops frames based on indexing as required to achieve + desired speed. +Param[0] + Bitmap: + 0:7 0 normal + 1 fast only "1.5 times" + n nX fast, 1/nX slow + 30 Framedrop: + '0' during 1.5 times play, every other B frame is dropped + '1' during 1.5 times play, stream is unchanged (bitrate + must not exceed 8mbps) + 31 Speed: + '0' slow + '1' fast +Param[1] + Direction: 0=forward, 1=reverse +Param[2] + Picture mask: + 1=I frames + 3=I, P frames + 7=I, P, B frames +Param[3] + B frames per GOP (for reverse play only) +Param[4] + Mute audio: 0=disable, 1=enable +Param[5] + Display 0=frame, 1=field +Param[6] + Specifies the number of muted audio frames to play before normal audio + resumes. + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_STEP_VIDEO +Enum 5/0x05 +Description + Each call to this API steps the playback to the next unit defined below + in the current playback direction. +Param[0] + 0=frame, 1=top field, 2=bottom field + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_DMA_BLOCK_SIZE +Enum 8/0x08 +Description + Set DMA transfer block size. Counterpart to API 0xC9 +Param[0] + DMA transfer block size in bytes. A different size may be specified + when issuing the DMA transfer command. + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_GET_XFER_INFO +Enum 9/0x09 +Description + This API call may be used to detect an end of stream condtion. +Result[0] + Stream type +Result[1] + Address offset +Result[2] + Maximum bytes to transfer +Result[3] + Buffer fullness + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_GET_DMA_STATUS +Enum 10/0x0A +Description + Status of the last DMA transfer +Result[0] + Bit 1 set means transfer complete + Bit 2 set means DMA error + Bit 3 set means linked list error +Result[1] + DMA type: 0=MPEG, 1=OSD, 2=YUV + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SCHED_DMA_FROM_HOST +Enum 11/0x0B +Description + Setup DMA from host operation. Counterpart to API 0xCC +Param[0] + Memory address of link list +Param[1] + Total # of bytes to transfer +Param[2] + DMA type (0=MPEG, 1=OSD, 2=YUV) + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_PAUSE_PLAYBACK +Enum 13/0x0D +Description + Freeze playback immediately. In this mode, when internal buffers are + full, no more data will be accepted and data request IRQs will be + masked. +Param[0] + Display: 0=last frame, 1=black + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_HALT_FW +Enum 14/0x0E +Description + The firmware is halted and no further API calls are serviced until + the firmware is uploaded again. + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_STANDARD +Enum 16/0x10 +Description + Selects display standard +Param[0] + 0=NTSC, 1=PAL + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_GET_VERSION +Enum 17/0x11 +Description + Returns decoder firmware version information +Result[0] + Version bitmask: + Bits 0:15 build + Bits 16:23 minor + Bits 24:31 major + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_STREAM_INPUT +Enum 20/0x14 +Description + Select decoder stream input port +Param[0] + 0=memory (default), 1=streaming + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_GET_TIMING_INFO +Enum 21/0x15 +Description + Returns timing information from start of playback +Result[0] + Frame count by decode order +Result[1] + Video PTS bits 0:31 by display order +Result[2] + Video PTS bit 32 by display order +Result[3] + SCR bits 0:31 by display order +Result[4] + SCR bit 32 by display order + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_AUDIO_MODE +Enum 22/0x16 +Description + Select audio mode +Param[0] + Dual mono mode action +Param[1] + Stereo mode action: + 0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_EVENT_NOTIFICATION +Enum 23/0x17 +Description + Setup firmware to notify the host about a particular event. + Counterpart to API 0xD5 +Param[0] + Event: 0=Audio mode change between stereo and dual channel +Param[1] + Notification 0=disabled, 1=enabled +Param[2] + Interrupt bit +Param[3] + Mailbox slot, -1 if no mailbox required. + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_DISPLAY_BUFFERS +Enum 24/0x18 +Description + Number of display buffers. To decode all frames in reverse playback you + must use nine buffers. +Param[0] + 0=six buffers, 1=nine buffers + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_EXTRACT_VBI +Enum 25/0x19 +Description + Extracts VBI data +Param[0] + 0=extract from extension & user data, 1=extract from private packets +Result[0] + VBI table location +Result[1] + VBI table size + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_DECODER_SOURCE +Enum 26/0x1A +Description + Selects decoder source. Ensure that the parameters passed to this + API match the encoder settings. +Param[0] + Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host +Param[1] + YUV picture width +Param[2] + YUV picture height +Param[3] + Bitmap: see Param[0] of API 0xBD + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_AUDIO_OUTPUT +Enum 27/0x1B +Description + Select audio output format +Param[0] + Bitmask: + 0:1 Data size: + '00' 16 bit + '01' 20 bit + '10' 24 bit + 2:7 Unused + 8:9 Mode: + '00' 2 channels + '01' 4 channels + '10' 6 channels + '11' 6 channels with one line data mode + (for left justified MSB first mode, 20 bit only) + 10:11 Unused + 12:13 Channel format: + '00' right justified MSB first mode + '01' left justified MSB first mode + '10' I2S mode + 14:15 Unused + 16:21 Right justify bit count + 22:31 Unused + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_AV_DELAY +Enum 28/0x1C +Description + Set audio/video delay in 90Khz ticks +Param[0] + 0=A/V in sync, negative=audio lags, positive=video lags + +------------------------------------------------------------------------------- + +Name CX2341X_DEC_SET_PREBUFFERING +Enum 30/0x1E +Description + Decoder prebuffering, when enabled up to 128KB are buffered for + streams <8mpbs or 640KB for streams >8mbps +Param[0] + 0=off, 1=on |
