diff options
Diffstat (limited to 'Documentation/mtd/nand_ecc.txt')
| -rw-r--r-- | Documentation/mtd/nand_ecc.txt | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt index e129b2479ea8..f8c3284bf6a7 100644 --- a/Documentation/mtd/nand_ecc.txt +++ b/Documentation/mtd/nand_ecc.txt @@ -107,7 +107,7 @@ for (i = 0; i < 256; i++) if (i & 0x01) rp1 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp1; else - rp0 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp1; + rp0 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp0; if (i & 0x02) rp3 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp3; else @@ -127,7 +127,7 @@ for (i = 0; i < 256; i++) if (i & 0x20) rp11 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp11; else - rp10 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp10; + rp10 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp10; if (i & 0x40) rp13 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp13; else @@ -158,7 +158,7 @@ the values in any order. So instead of calculating all the bits individually, let us try to rearrange things. For the column parity this is easy. We can just xor the bytes and in the end filter out the relevant bits. This is pretty nice as it will bring -all cp calculation out of the if loop. +all cp calculation out of the for loop. Similarly we can first xor the bytes for the various rows. This leads to: @@ -271,11 +271,11 @@ to write our code in such a way that we process data in 32 bit chunks. Of course this means some modification as the row parity is byte by byte. A quick analysis: for the column parity we use the par variable. When extending to 32 bits -we can in the end easily calculate p0 and p1 from it. +we can in the end easily calculate rp0 and rp1 from it. (because par now consists of 4 bytes, contributing to rp1, rp0, rp1, rp0 -respectively) +respectively, from MSB to LSB) also rp2 and rp3 can be easily retrieved from par as rp3 covers the -first two bytes and rp2 the last two bytes. +first two MSBs and rp2 covers the last two LSBs. Note that of course now the loop is executed only 64 times (256/4). And note that care must taken wrt byte ordering. The way bytes are @@ -387,11 +387,11 @@ Analysis 2 The code (of course) works, and hurray: we are a little bit faster than the linux driver code (about 15%). But wait, don't cheer too quickly. -THere is more to be gained. +There is more to be gained. If we look at e.g. rp14 and rp15 we see that we either xor our data with rp14 or with rp15. However we also have par which goes over all data. This means there is no need to calculate rp14 as it can be calculated from -rp15 through rp14 = par ^ rp15; +rp15 through rp14 = par ^ rp15, because par = rp14 ^ rp15; (or if desired we can avoid calculating rp15 and calculate it from rp14). That is why some places refer to inverse parity. Of course the same thing holds for rp4/5, rp6/7, rp8/9, rp10/11 and rp12/13. @@ -419,12 +419,12 @@ with if (i & 0x20) rp15 ^= cur; and outside the loop added: - rp4 = par ^ rp5; - rp6 = par ^ rp7; - rp8 = par ^ rp9; - rp10 = par ^ rp11; - rp12 = par ^ rp13; - rp14 = par ^ rp15; + rp4 = par ^ rp5; + rp6 = par ^ rp7; + rp8 = par ^ rp9; + rp10 = par ^ rp11; + rp12 = par ^ rp13; + rp14 = par ^ rp15; And after that the code takes about 30% more time, although the number of statements is reduced. This is also reflected in the assembly code. @@ -524,12 +524,12 @@ THe code within the for loop was changed to: cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; - cur = *bp++; tmppar ^= cur; rp10 ^= tmppar; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; + cur = *bp++; tmppar ^= cur; rp10 ^= tmppar; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur; rp8 ^= cur; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur; rp8 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; rp8 ^= cur; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp8 ^= cur; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp8 ^= cur; cur = *bp++; tmppar ^= cur; rp8 ^= cur; cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur; @@ -537,7 +537,7 @@ THe code within the for loop was changed to: cur = *bp++; tmppar ^= cur; rp4 ^= cur; cur = *bp++; tmppar ^= cur; - par ^= tmppar; + par ^= tmppar; if ((i & 0x1) == 0) rp12 ^= tmppar; if ((i & 0x2) == 0) rp14 ^= tmppar; } @@ -548,8 +548,8 @@ to rp12 and rp14. While making the changes I also found that I could exploit that tmppar contains the running parity for this iteration. So instead of having: -rp4 ^= cur; rp6 = cur; -I removed the rp6 = cur; statement and did rp6 ^= tmppar; on next +rp4 ^= cur; rp6 ^= cur; +I removed the rp6 ^= cur; statement and did rp6 ^= tmppar; on next statement. A similar change was done for rp8 and rp10 @@ -593,22 +593,22 @@ The new code now looks like: cur = *bp++; tmppar ^= cur; rp4_6 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; - cur = *bp++; tmppar ^= cur; rp10 ^= tmppar; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; + cur = *bp++; tmppar ^= cur; rp10 ^= tmppar; - notrp8 = tmppar; - cur = *bp++; tmppar ^= cur; rp4_6 ^= cur; + notrp8 = tmppar; + cur = *bp++; tmppar ^= cur; rp4_6 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; cur = *bp++; tmppar ^= cur; - rp8 = rp8 ^ tmppar ^ notrp8; + rp8 = rp8 ^ tmppar ^ notrp8; cur = *bp++; tmppar ^= cur; rp4_6 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; cur = *bp++; tmppar ^= cur; rp4 ^= cur; cur = *bp++; tmppar ^= cur; - par ^= tmppar; + par ^= tmppar; if ((i & 0x1) == 0) rp12 ^= tmppar; if ((i & 0x2) == 0) rp14 ^= tmppar; } @@ -700,7 +700,7 @@ Conclusion The gain when calculating the ecc is tremendous. Om my development hardware a speedup of a factor of 18 for ecc calculation was achieved. On a test on an embedded system with a MIPS core a factor 7 was obtained. -On a test with a Linksys NSLU2 (ARMv5TE processor) the speedup was a factor +On a test with a Linksys NSLU2 (ARMv5TE processor) the speedup was a factor 5 (big endian mode, gcc 4.1.2, -O3) For correction not much gain could be obtained (as bitflips are rare). Then again there are also much less cycles spent there. |
