diff options
Diffstat (limited to 'Documentation/filesystems')
23 files changed, 4001 insertions, 1108 deletions
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 52cd611277a3..8dd6db76171d 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -68,6 +68,8 @@ ncpfs.txt - info on Novell Netware(tm) filesystem using NCP protocol. nfsroot.txt - short guide on setting up a diskless box with NFS root filesystem. +nilfs2.txt + - info and mount options for the NILFS2 filesystem. ntfs.txt - info and mount options for the NTFS filesystem (Windows NT). ocfs2.txt diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index ec6a9392a173..3120f8dd2c31 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -437,8 +437,11 @@ grab BKL for cases when we close a file that had been opened r/w, but that can and should be done using the internal locking with smaller critical areas). Current worst offender is ext2_get_block()... -->fasync() is a mess. This area needs a big cleanup and that will probably -affect locking. +->fasync() is called without BKL protection, and is responsible for +maintaining the FASYNC bit in filp->f_flags. Most instances call +fasync_helper(), which does that maintenance, so it's not normally +something one needs to worry about. Return values > 0 will be mapped to +zero in the VFS layer. ->readdir() and ->ioctl() on directories must be changed. Ideally we would move ->readdir() to inode_operations and use a separate method for directory @@ -502,23 +505,31 @@ prototypes: void (*open)(struct vm_area_struct*); void (*close)(struct vm_area_struct*); int (*fault)(struct vm_area_struct*, struct vm_fault *); - int (*page_mkwrite)(struct vm_area_struct *, struct page *); + int (*page_mkwrite)(struct vm_area_struct *, struct vm_fault *); int (*access)(struct vm_area_struct *, unsigned long, void*, int, int); locking rules: BKL mmap_sem PageLocked(page) open: no yes close: no yes -fault: no yes -page_mkwrite: no yes no +fault: no yes can return with page locked +page_mkwrite: no yes can return with page locked access: no yes - ->page_mkwrite() is called when a previously read-only page is -about to become writeable. The file system is responsible for -protecting against truncate races. Once appropriate action has been -taking to lock out truncate, the page range should be verified to be -within i_size. The page mapping should also be checked that it is not -NULL. + ->fault() is called when a previously not present pte is about +to be faulted in. The filesystem must find and return the page associated +with the passed in "pgoff" in the vm_fault structure. If it is possible that +the page may be truncated and/or invalidated, then the filesystem must lock +the page, then ensure it is not already truncated (the page lock will block +subsequent truncate), and then return with VM_FAULT_LOCKED, and the page +locked. The VM will unlock the page. + + ->page_mkwrite() is called when a previously read-only pte is +about to become writeable. The filesystem again must ensure that there are +no truncate/invalidate races, and then return with the page locked. If +the page has been truncated, the filesystem should not look up a new page +like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which +will cause the VM to retry the fault. ->access() is called when get_user_pages() fails in acces_process_vm(), typically used to debug a process through diff --git a/Documentation/filesystems/caching/backend-api.txt b/Documentation/filesystems/caching/backend-api.txt new file mode 100644 index 000000000000..382d52cdaf2d --- /dev/null +++ b/Documentation/filesystems/caching/backend-api.txt @@ -0,0 +1,658 @@ + ========================== + FS-CACHE CACHE BACKEND API + ========================== + +The FS-Cache system provides an API by which actual caches can be supplied to +FS-Cache for it to then serve out to network filesystems and other interested +parties. + +This API is declared in <linux/fscache-cache.h>. + + +==================================== +INITIALISING AND REGISTERING A CACHE +==================================== + +To start off, a cache definition must be initialised and registered for each +cache the backend wants to make available. For instance, CacheFS does this in +the fill_super() operation on mounting. + +The cache definition (struct fscache_cache) should be initialised by calling: + + void fscache_init_cache(struct fscache_cache *cache, + struct fscache_cache_ops *ops, + const char *idfmt, + ...); + +Where: + + (*) "cache" is a pointer to the cache definition; + + (*) "ops" is a pointer to the table of operations that the backend supports on + this cache; and + + (*) "idfmt" is a format and printf-style arguments for constructing a label + for the cache. + + +The cache should then be registered with FS-Cache by passing a pointer to the +previously initialised cache definition to: + + int fscache_add_cache(struct fscache_cache *cache, + struct fscache_object *fsdef, + const char *tagname); + +Two extra arguments should also be supplied: + + (*) "fsdef" which should point to the object representation for the FS-Cache + master index in this cache. Netfs primary index entries will be created + here. FS-Cache keeps the caller's reference to the index object if + successful and will release it upon withdrawal of the cache. + + (*) "tagname" which, if given, should be a text string naming this cache. If + this is NULL, the identifier will be used instead. For CacheFS, the + identifier is set to name the underlying block device and the tag can be + supplied by mount. + +This function may return -ENOMEM if it ran out of memory or -EEXIST if the tag +is already in use. 0 will be returned on success. + + +===================== +UNREGISTERING A CACHE +===================== + +A cache can be withdrawn from the system by calling this function with a +pointer to the cache definition: + + void fscache_withdraw_cache(struct fscache_cache *cache); + +In CacheFS's case, this is called by put_super(). + + +======== +SECURITY +======== + +The cache methods are executed one of two contexts: + + (1) that of the userspace process that issued the netfs operation that caused + the cache method to be invoked, or + + (2) that of one of the processes in the FS-Cache thread pool. + +In either case, this may not be an appropriate context in which to access the +cache. + +The calling process's fsuid, fsgid and SELinux security identities may need to +be masqueraded for the duration of the cache driver's access to the cache. +This is left to the cache to handle; FS-Cache makes no effort in this regard. + + +=================================== +CONTROL AND STATISTICS PRESENTATION +=================================== + +The cache may present data to the outside world through FS-Cache's interfaces +in sysfs and procfs - the former for control and the latter for statistics. + +A sysfs directory called /sys/fs/fscache/<cachetag>/ is created if CONFIG_SYSFS +is enabled. This is accessible through the kobject struct fscache_cache::kobj +and is for use by the cache as it sees fit. + + +======================== +RELEVANT DATA STRUCTURES +======================== + + (*) Index/Data file FS-Cache representation cookie: + + struct fscache_cookie { + struct fscache_object_def *def; + struct fscache_netfs *netfs; + void *netfs_data; + ... + }; + + The fields that might be of use to the backend describe the object + definition, the netfs definition and the netfs's data for this cookie. + The object definition contain functions supplied by the netfs for loading + and matching index entries; these are required to provide some of the + cache operations. + + + (*) In-cache object representation: + + struct fscache_object { + int debug_id; + enum { + FSCACHE_OBJECT_RECYCLING, + ... + } state; + spinlock_t lock + struct fscache_cache *cache; + struct fscache_cookie *cookie; + ... + }; + + Structures of this type should be allocated by the cache backend and + passed to FS-Cache when requested by the appropriate cache operation. In + the case of CacheFS, they're embedded in CacheFS's internal object + structures. + + The debug_id is a simple integer that can be used in debugging messages + that refer to a particular object. In such a case it should be printed + using "OBJ%x" to be consistent with FS-Cache. + + Each object contains a pointer to the cookie that represents the object it + is backing. An object should retired when put_object() is called if it is + in state FSCACHE_OBJECT_RECYCLING. The fscache_object struct should be + initialised by calling fscache_object_init(object). + + + (*) FS-Cache operation record: + + struct fscache_operation { + atomic_t usage; + struct fscache_object *object; + unsigned long flags; + #define FSCACHE_OP_EXCLUSIVE + void (*processor)(struct fscache_operation *op); + void (*release)(struct fscache_operation *op); + ... + }; + + FS-Cache has a pool of threads that it uses to give CPU time to the + various asynchronous operations that need to be done as part of driving + the cache. These are represented by the above structure. The processor + method is called to give the op CPU time, and the release method to get + rid of it when its usage count reaches 0. + + An operation can be made exclusive upon an object by setting the + appropriate flag before enqueuing it with fscache_enqueue_operation(). If + an operation needs more processing time, it should be enqueued again. + + + (*) FS-Cache retrieval operation record: + + struct fscache_retrieval { + struct fscache_operation op; + struct address_space *mapping; + struct list_head *to_do; + ... + }; + + A structure of this type is allocated by FS-Cache to record retrieval and + allocation requests made by the netfs. This struct is then passed to the + backend to do the operation. The backend may get extra refs to it by + calling fscache_get_retrieval() and refs may be discarded by calling + fscache_put_retrieval(). + + A retrieval operation can be used by the backend to do retrieval work. To + do this, the retrieval->op.processor method pointer should be set + appropriately by the backend and fscache_enqueue_retrieval() called to + submit it to the thread pool. CacheFiles, for example, uses this to queue + page examination when it detects PG_lock being cleared. + + The to_do field is an empty list available for the cache backend to use as + it sees fit. + + + (*) FS-Cache storage operation record: + + struct fscache_storage { + struct fscache_operation op; + pgoff_t store_limit; + ... + }; + + A structure of this type is allocated by FS-Cache to record outstanding + writes to be made. FS-Cache itself enqueues this operation and invokes + the write_page() method on the object at appropriate times to effect + storage. + + +================ +CACHE OPERATIONS +================ + +The cache backend provides FS-Cache with a table of operations that can be +performed on the denizens of the cache. These are held in a structure of type: + + struct fscache_cache_ops + + (*) Name of cache provider [mandatory]: + + const char *name + + This isn't strictly an operation, but should be pointed at a string naming + the backend. + + + (*) Allocate a new object [mandatory]: + + struct fscache_object *(*alloc_object)(struct fscache_cache *cache, + struct fscache_cookie *cookie) + + This method is used to allocate a cache object representation to back a + cookie in a particular cache. fscache_object_init() should be called on + the object to initialise it prior to returning. + + This function may also be used to parse the index key to be used for + multiple lookup calls to turn it into a more convenient form. FS-Cache + will call the lookup_complete() method to allow the cache to release the + form once lookup is complete or aborted. + + + (*) Look up and create object [mandatory]: + + void (*lookup_object)(struct fscache_object *object) + + This method is used to look up an object, given that the object is already + allocated and attached to the cookie. This should instantiate that object + in the cache if it can. + + The method should call fscache_object_lookup_negative() as soon as + possible if it determines the object doesn't exist in the cache. If the + object is found to exist and the netfs indicates that it is valid then + fscache_obtained_object() should be called once the object is in a + position to have data stored in it. Similarly, fscache_obtained_object() + should also be called once a non-present object has been created. + + If a lookup error occurs, fscache_object_lookup_error() should be called + to abort the lookup of that object. + + + (*) Release lookup data [mandatory]: + + void (*lookup_complete)(struct fscache_object *object) + + This method is called to ask the cache to release any resources it was + using to perform a lookup. + + + (*) Increment object refcount [mandatory]: + + struct fscache_object *(*grab_object)(struct fscache_object *object) + + This method is called to increment the reference count on an object. It + may fail (for instance if the cache is being withdrawn) by returning NULL. + It should return the object pointer if successful. + + + (*) Lock/Unlock object [mandatory]: + + void (*lock_object)(struct fscache_object *object) + void (*unlock_object)(struct fscache_object *object) + + These methods are used to exclusively lock an object. It must be possible + to schedule with the lock held, so a spinlock isn't sufficient. + + + (*) Pin/Unpin object [optional]: + + int (*pin_object)(struct fscache_object *object) + void (*unpin_object)(struct fscache_object *object) + + These methods are used to pin an object into the cache. Once pinned an + object cannot be reclaimed to make space. Return -ENOSPC if there's not + enough space in the cache to permit this. + + + (*) Update object [mandatory]: + + int (*update_object)(struct fscache_object *object) + + This is called to update the index entry for the specified object. The + new information should be in object->cookie->netfs_data. This can be + obtained by calling object->cookie->def->get_aux()/get_attr(). + + + (*) Discard object [mandatory]: + + void (*drop_object)(struct fscache_object *object) + + This method is called to indicate that an object has been unbound from its + cookie, and that the cache should release the object's resources and + retire it if it's in state FSCACHE_OBJECT_RECYCLING. + + This method should not attempt to release any references held by the + caller. The caller will invoke the put_object() method as appropriate. + + + (*) Release object reference [mandatory]: + + void (*put_object)(struct fscache_object *object) + + This method is used to discard a reference to an object. The object may + be freed when all the references to it are released. + + + (*) Synchronise a cache [mandatory]: + + void (*sync)(struct fscache_cache *cache) + + This is called to ask the backend to synchronise a cache with its backing + device. + + + (*) Dissociate a cache [mandatory]: + + void (*dissociate_pages)(struct fscache_cache *cache) + + This is called to ask a cache to perform any page dissociations as part of + cache withdrawal. + + + (*) Notification that the attributes on a netfs file changed [mandatory]: + + int (*attr_changed)(struct fscache_object *object); + + This is called to indicate to the cache that certain attributes on a netfs + file have changed (for example the maximum size a file may reach). The + cache can read these from the netfs by calling the cookie's get_attr() + method. + + The cache may use the file size information to reserve space on the cache. + It should also call fscache_set_store_limit() to indicate to FS-Cache the + highest byte it's willing to store for an object. + + This method may return -ve if an error occurred or the cache object cannot + be expanded. In such a case, the object will be withdrawn from service. + + This operation is run asynchronously from FS-Cache's thread pool, and + storage and retrieval operations from the netfs are excluded during the + execution of this operation. + + + (*) Reserve cache space for an object's data [optional]: + + int (*reserve_space)(struct fscache_object *object, loff_t size); + + This is called to request that cache space be reserved to hold the data + for an object and the metadata used to track it. Zero size should be + taken as request to cancel a reservation. + + This should return 0 if successful, -ENOSPC if there isn't enough space + available, or -ENOMEM or -EIO on other errors. + + The reservation may exceed the current size of the object, thus permitting + future expansion. If the amount of space consumed by an object would + exceed the reservation, it's permitted to refuse requests to allocate + pages, but not required. An object may be pruned down to its reservation + size if larger than that already. + + + (*) Request page be read from cache [mandatory]: + + int (*read_or_alloc_page)(struct fscache_retrieval *op, + struct page *page, + gfp_t gfp) + + This is called to attempt to read a netfs page from the cache, or to + reserve a backing block if not. FS-Cache will have done as much checking + as it can before calling, but most of the work belongs to the backend. + + If there's no page in the cache, then -ENODATA should be returned if the + backend managed to reserve a backing block; -ENOBUFS or -ENOMEM if it + didn't. + + If there is suitable data in the cache, then a read operation should be + queued and 0 returned. When the read finishes, fscache_end_io() should be + called. + + The fscache_mark_pages_cached() should be called for the page if any cache + metadata is retained. This will indicate to the netfs that the page needs + explicit uncaching. This operation takes a pagevec, thus allowing several + pages to be marked at once. + + The retrieval record pointed to by op should be retained for each page + queued and released when I/O on the page has been formally ended. + fscache_get/put_retrieval() are available for this purpose. + + The retrieval record may be used to get CPU time via the FS-Cache thread + pool. If this is desired, the op->op.processor should be set to point to + the appropriate processing routine, and fscache_enqueue_retrieval() should + be called at an appropriate point to request CPU time. For instance, the + retrieval routine could be enqueued upon the completion of a disk read. + The to_do field in the retrieval record is provided to aid in this. + + If an I/O error occurs, fscache_io_error() should be called and -ENOBUFS + returned if possible or fscache_end_io() called with a suitable error + code.. + + + (*) Request pages be read from cache [mandatory]: + + int (*read_or_alloc_pages)(struct fscache_retrieval *op, + struct list_head *pages, + unsigned *nr_pages, + gfp_t gfp) + + This is like the read_or_alloc_page() method, except it is handed a list + of pages instead of one page. Any pages on which a read operation is + started must be added to the page cache for the specified mapping and also + to the LRU. Such pages must also be removed from the pages list and + *nr_pages decremented per page. + + If there was an error such as -ENOMEM, then that should be returned; else + if one or more pages couldn't be read or allocated, then -ENOBUFS should + be returned; else if one or more pages couldn't be read, then -ENODATA + should be returned. If all the pages are dispatched then 0 should be + returned. + + + (*) Request page be allocated in the cache [mandatory]: + + int (*allocate_page)(struct fscache_retrieval *op, + struct page *page, + gfp_t gfp) + + This is like the read_or_alloc_page() method, except that it shouldn't + read from the cache, even if there's data there that could be retrieved. + It should, however, set up any internal metadata required such that + the write_page() method can write to the cache. + + If there's no backing block available, then -ENOBUFS should be returned + (or -ENOMEM if there were other problems). If a block is successfully + allocated, then the netfs page should be marked and 0 returned. + + + (*) Request pages be allocated in the cache [mandatory]: + + int (*allocate_pages)(struct fscache_retrieval *op, + struct list_head *pages, + unsigned *nr_pages, + gfp_t gfp) + + This is an multiple page version of the allocate_page() method. pages and + nr_pages should be treated as for the read_or_alloc_pages() method. + + + (*) Request page be written to cache [mandatory]: + + int (*write_page)(struct fscache_storage *op, + struct page *page); + + This is called to write from a page on which there was a previously + successful read_or_alloc_page() call or similar. FS-Cache filters out + pages that don't have mappings. + + This method is called asynchronously from the FS-Cache thread pool. It is + not required to actually store anything, provided -ENODATA is then + returned to the next read of this page. + + If an error occurred, then a negative error code should be returned, + otherwise zero should be returned. FS-Cache will take appropriate action + in response to an error, such as withdrawing this object. + + If this method returns success then FS-Cache will inform the netfs + appropriately. + + + (*) Discard retained per-page metadata [mandatory]: + + void (*uncache_page)(struct fscache_object *object, struct page *page) + + This is called when a netfs page is being evicted from the pagecache. The + cache backend should tear down any internal representation or tracking it + maintains for this page. + + +================== +FS-CACHE UTILITIES +================== + +FS-Cache provides some utilities that a cache backend may make use of: + + (*) Note occurrence of an I/O error in a cache: + + void fscache_io_error(struct fscache_cache *cache) + + This tells FS-Cache that an I/O error occurred in the cache. After this + has been called, only resource dissociation operations (object and page + release) will be passed from the netfs to the cache backend for the + specified cache. + + This does not actually withdraw the cache. That must be done separately. + + + (*) Invoke the retrieval I/O completion function: + + void fscache_end_io(struct fscache_retrieval *op, struct page *page, + int error); + + This is called to note the end of an attempt to retrieve a page. The + error value should be 0 if successful and an error otherwise. + + + (*) Set highest store limit: + + void fscache_set_store_limit(struct fscache_object *object, + loff_t i_size); + + This sets the limit FS-Cache imposes on the highest byte it's willing to + try and store for a netfs. Any page over this limit is automatically + rejected by fscache_read_alloc_page() and co with -ENOBUFS. + + + (*) Mark pages as being cached: + + void fscache_mark_pages_cached(struct fscache_retrieval *op, + struct pagevec *pagevec); + + This marks a set of pages as being cached. After this has been called, + the netfs must call fscache_uncache_page() to unmark the pages. + + + (*) Perform coherency check on an object: + + enum fscache_checkaux fscache_check_aux(struct fscache_object *object, + const void *data, + uint16_t datalen); + + This asks the netfs to perform a coherency check on an object that has + just been looked up. The cookie attached to the object will determine the + netfs to use. data and datalen should specify where the auxiliary data + retrieved from the cache can be found. + + One of three values will be returned: + + (*) FSCACHE_CHECKAUX_OKAY + + The coherency data indicates the object is valid as is. + + (*) FSCACHE_CHECKAUX_NEEDS_UPDATE + + The coherency data needs updating, but otherwise the object is + valid. + + (*) FSCACHE_CHECKAUX_OBSOLETE + + The coherency data indicates that the object is obsolete and should + be discarded. + + + (*) Initialise a freshly allocated object: + + void fscache_object_init(struct fscache_object *object); + + This initialises all the fields in an object representation. + + + (*) Indicate the destruction of an object: + + void fscache_object_destroyed(struct fscache_cache *cache); + + This must be called to inform FS-Cache that an object that belonged to a + cache has been destroyed and deallocated. This will allow continuation + of the cache withdrawal process when it is stopped pending destruction of + all the objects. + + + (*) Indicate negative lookup on an object: + + void fscache_object_lookup_negative(struct fscache_object *object); + + This is called to indicate to FS-Cache that a lookup process for an object + found a negative result. + + This changes the state of an object to permit reads pending on lookup + completion to go off and start fetching data from the netfs server as it's + known at this point that there can't be any data in the cache. + + This may be called multiple times on an object. Only the first call is + significant - all subsequent calls are ignored. + + + (*) Indicate an object has been obtained: + + void fscache_obtained_object(struct fscache_object *object); + + This is called to indicate to FS-Cache that a lookup process for an object + produced a positive result, or that an object was created. This should + only be called once for any particular object. + + This changes the state of an object to indicate: + + (1) if no call to fscache_object_lookup_negative() has been made on + this object, that there may be data available, and that reads can + now go and look for it; and + + (2) that writes may now proceed against this object. + + + (*) Indicate that object lookup failed: + + void fscache_object_lookup_error(struct fscache_object *object); + + This marks an object as having encountered a fatal error (usually EIO) + and causes it to move into a state whereby it will be withdrawn as soon + as possible. + + + (*) Get and release references on a retrieval record: + + void fscache_get_retrieval(struct fscache_retrieval *op); + void fscache_put_retrieval(struct fscache_retrieval *op); + + These two functions are used to retain a retrieval record whilst doing + asynchronous data retrieval and block allocation. + + + (*) Enqueue a retrieval record for processing. + + void fscache_enqueue_retrieval(struct fscache_retrieval *op); + + This enqueues a retrieval record for processing by the FS-Cache thread + pool. One of the threads in the pool will invoke the retrieval record's + op->op.processor callback function. This function may be called from + within the callback function. + + + (*) List of object state names: + + const char *fscache_object_states[]; + + For debugging purposes, this may be used to turn the state that an object + is in into a text string for display purposes. diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt new file mode 100644 index 000000000000..748a1ae49e12 --- /dev/null +++ b/Documentation/filesystems/caching/cachefiles.txt @@ -0,0 +1,501 @@ + =============================================== + CacheFiles: CACHE ON ALREADY MOUNTED FILESYSTEM + =============================================== + +Contents: + + (*) Overview. + + (*) Requirements. + + (*) Configuration. + + (*) Starting the cache. + + (*) Things to avoid. + + (*) Cache culling. + + (*) Cache structure. + + (*) Security model and SELinux. + + (*) A note on security. + + (*) Statistical information. + + (*) Debugging. + + +======== +OVERVIEW +======== + +CacheFiles is a caching backend that's meant to use as a cache a directory on +an already mounted filesystem of a local type (such as Ext3). + +CacheFiles uses a userspace daemon to do some of the cache management - such as +reaping stale nodes and culling. This is called cachefilesd and lives in +/sbin. + +The filesystem and data integrity of the cache are only as good as those of the +filesystem providing the backing services. Note that CacheFiles does not +attempt to journal anything since the journalling interfaces of the various +filesystems are very specific in nature. + +CacheFiles creates a misc character device - "/dev/cachefiles" - that is used +to communication with the daemon. Only one thing may have this open at once, +and whilst it is open, a cache is at least partially in existence. The daemon +opens this and sends commands down it to control the cache. + +CacheFiles is currently limited to a single cache. + +CacheFiles attempts to maintain at least a certain percentage of free space on +the filesystem, shrinking the cache by culling the objects it contains to make +space if necessary - see the "Cache Culling" section. This means it can be +placed on the same medium as a live set of data, and will expand to make use of +spare space and automatically contract when the set of data requires more +space. + + +============ +REQUIREMENTS +============ + +The use of CacheFiles and its daemon requires the following features to be +available in the system and in the cache filesystem: + + - dnotify. + + - extended attributes (xattrs). + + - openat() and friends. + + - bmap() support on files in the filesystem (FIBMAP ioctl). + + - The use of bmap() to detect a partial page at the end of the file. + +It is strongly recommended that the "dir_index" option is enabled on Ext3 +filesystems being used as a cache. + + +============= +CONFIGURATION +============= + +The cache is configured by a script in /etc/cachefilesd.conf. These commands +set up cache ready for use. The following script commands are available: + + (*) brun <N>% + (*) bcull <N>% + (*) bstop <N>% + (*) frun <N>% + (*) fcull <N>% + (*) fstop <N>% + + Configure the culling limits. Optional. See the section on culling + The defaults are 7% (run), 5% (cull) and 1% (stop) respectively. + + The commands beginning with a 'b' are file space (block) limits, those + beginning with an 'f' are file count limits. + + (*) dir <path> + + Specify the directory containing the root of the cache. Mandatory. + + (*) tag <name> + + Specify a tag to FS-Cache to use in distinguishing multiple caches. + Optional. The default is "CacheFiles". + + (*) debug <mask> + + Specify a numeric bitmask to control debugging in the kernel module. + Optional. The default is zero (all off). The following values can be + OR'd into the mask to collect various information: + + 1 Turn on trace of function entry (_enter() macros) + 2 Turn on trace of function exit (_leave() macros) + 4 Turn on trace of internal debug points (_debug()) + + This mask can also be set through sysfs, eg: + + echo 5 >/sys/modules/cachefiles/parameters/debug + + +================== +STARTING THE CACHE +================== + +The cache is started by running the daemon. The daemon opens the cache device, +configures the cache and tells it to begin caching. At that point the cache +binds to fscache and the cache becomes live. + +The daemon is run as follows: + + /sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>] + +The flags are: + + (*) -d + + Increase the debugging level. This can be specified multiple times and + is cumulative with itself. + + (*) -s + + Send messages to stderr instead of syslog. + + (*) -n + + Don't daemonise and go into background. + + (*) -f <configfile> + + Use an alternative configuration file rather than the default one. + + +=============== +THINGS TO AVOID +=============== + +Do not mount other things within the cache as this will cause problems. The +kernel module contains its own very cut-down path walking facility that ignores +mountpoints, but the daemon can't avoid them. + +Do not create, rename or unlink files and directories in the cache whilst the +cache is active, as this may cause the state to become uncertain. + +Renaming files in the cache might make objects appear to be other objects (the +filename is part of the lookup key). + +Do not change or remove the extended attributes attached to cache files by the +cache as this will cause the cache state management to get confused. + +Do not create files or directories in the cache, lest the cache get confused or +serve incorrect data. + +Do not chmod files in the cache. The module creates things with minimal +permissions to prevent random users being able to access them directly. + + +============= +CACHE CULLING +============= + +The cache may need culling occasionally to make space. This involves +discarding objects from the cache that have been used less recently than +anything else. Culling is based on the access time of data objects. Empty +directories are culled if not in use. + +Cache culling is done on the basis of the percentage of blocks and the +percentage of files available in the underlying filesystem. There are six +"limits": + + (*) brun + (*) frun + + If the amount of free space and the number of available files in the cache + rises above both these limits, then culling is turned off. + + (*) bcull + (*) fcull + + If the amount of available space or the number of available files in the + cache falls below either of these limits, then culling is started. + + (*) bstop + (*) fstop + + If the amount of available space or the number of available files in the + cache falls below either of these limits, then no further allocation of + disk space or files is permitted until culling has raised things above + these limits again. + +These must be configured thusly: + + 0 <= bstop < bcull < brun < 100 + 0 <= fstop < fcull < frun < 100 + +Note that these are percentages of available space and available files, and do +_not_ appear as 100 minus the percentage displayed by the "df" program. + +The userspace daemon scans the cache to build up a table of cullable objects. +These are then culled in least recently used order. A new scan of the cache is +started as soon as space is made in the table. Objects will be skipped if +their atimes have changed or if the kernel module says it is still using them. + + +=============== +CACHE STRUCTURE +=============== + +The CacheFiles module will create two directories in the directory it was +given: + + (*) cache/ + + (*) graveyard/ + +The active cache objects all reside in the first directory. The CacheFiles +kernel module moves any retired or culled objects that it can't simply unlink +to the graveyard from which the daemon will actually delete them. + +The daemon uses dnotify to monitor the graveyard directory, and will delete +anything that appears therein. + + +The module represents index objects as directories with the filename "I..." or +"J...". Note that the "cache/" directory is itself a special index. + +Data objects are represented as files if they have no children, or directories +if they do. Their filenames all begin "D..." or "E...". If represented as a +directory, data objects will have a file in the directory called "data" that +actually holds the data. + +Special objects are similar to data objects, except their filenames begin +"S..." or "T...". + + +If an object has children, then it will be represented as a directory. +Immediately in the representative directory are a collection of directories +named for hash values of the child object keys with an '@' prepended. Into +this directory, if possible, will be placed the representations of the child +objects: + + INDEX INDEX INDEX DATA FILES + ========= ========== ================================= ================ + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400 + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry + + +If the key is so long that it exceeds NAME_MAX with the decorations added on to +it, then it will be cut into pieces, the first few of which will be used to +make a nest of directories, and the last one of which will be the objects +inside the last directory. The names of the intermediate directories will have +'+' prepended: + + J1223/@23/+xy...z/+kl...m/Epqr + + +Note that keys are raw data, and not only may they exceed NAME_MAX in size, +they may also contain things like '/' and NUL characters, and so they may not +be suitable for turning directly into a filename. + +To handle this, CacheFiles will use a suitably printable filename directly and +"base-64" encode ones that aren't directly suitable. The two versions of +object filenames indicate the encoding: + + OBJECT TYPE PRINTABLE ENCODED + =============== =============== =============== + Index "I..." "J..." + Data "D..." "E..." + Special "S..." "T..." + +Intermediate directories are always "@" or "+" as appropriate. + + +Each object in the cache has an extended attribute label that holds the object +type ID (required to distinguish special objects) and the auxiliary data from +the netfs. The latter is used to detect stale objects in the cache and update +or retire them. + + +Note that CacheFiles will erase from the cache any file it doesn't recognise or +any file of an incorrect type (such as a FIFO file or a device file). + + +========================== +SECURITY MODEL AND SELINUX +========================== + +CacheFiles is implemented to deal properly with the LSM security features of +the Linux kernel and the SELinux facility. + +One of the problems that CacheFiles faces is that it is generally acting on +behalf of a process, and running in that process's context, and that includes a +security context that is not appropriate for accessing the cache - either +because the files in the cache are inaccessible to that process, or because if +the process creates a file in the cache, that file may be inaccessible to other +processes. + +The way CacheFiles works is to temporarily change the security context (fsuid, +fsgid and actor security label) that the process acts as - without changing the +security context of the process when it the target of an operation performed by +some other process (so signalling and suchlike still work correctly). + + +When the CacheFiles module is asked to bind to its cache, it: + + (1) Finds the security label attached to the root cache directory and uses + that as the security label with which it will create files. By default, + this is: + + cachefiles_var_t + + (2) Finds the security label of the process which issued the bind request + (presumed to be the cachefilesd daemon), which by default will be: + + cachefilesd_t + + and asks LSM to supply a security ID as which it should act given the + daemon's label. By default, this will be: + + cachefiles_kernel_t + + SELinux transitions the daemon's security ID to the module's security ID + based on a rule of this form in the policy. + + type_transition <daemon's-ID> kernel_t : process <module's-ID>; + + For instance: + + type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t; + + +The module's security ID gives it permission to create, move and remove files +and directories in the cache, to find and access directories and files in the +cache, to set and access extended attributes on cache objects, and to read and +write files in the cache. + +The daemon's security ID gives it only a very restricted set of permissions: it +may scan directories, stat files and erase files and directories. It may +not read or write files in the cache, and so it is precluded from accessing the +data cached therein; nor is it permitted to create new files in the cache. + + +There are policy source files available in: + + http://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2 + +and later versions. In that tarball, see the files: + + cachefilesd.te + cachefilesd.fc + cachefilesd.if + +They are built and installed directly by the RPM. + +If a non-RPM based system is being used, then copy the above files to their own +directory and run: + + make -f /usr/share/selinux/devel/Makefile + semodule -i cachefilesd.pp + +You will need checkpolicy and selinux-policy-devel installed prior to the +build. + + +By default, the cache is located in /var/fscache, but if it is desirable that +it should be elsewhere, than either the above policy files must be altered, or +an auxiliary policy must be installed to label the alternate location of the +cache. + +For instructions on how to add an auxiliary policy to enable the cache to be +located elsewhere when SELinux is in enforcing mode, please see: + + /usr/share/doc/cachefilesd-*/move-cache.txt + +When the cachefilesd rpm is installed; alternatively, the document can be found +in the sources. + + +================== +A NOTE ON SECURITY +================== + +CacheFiles makes use of the split security in the task_struct. It allocates +its own task_security structure, and redirects current->cred to point to it +when it acts on behalf of another process, in that process's context. + +The reason it does this is that it calls vfs_mkdir() and suchlike rather than +bypassing security and calling inode ops directly. Therefore the VFS and LSM +may deny the CacheFiles access to the cache data because under some +circumstances the caching code is running in the security context of whatever +process issued the original syscall on the netfs. + +Furthermore, should CacheFiles create a file or directory, the security +parameters with that object is created (UID, GID, security label) would be +derived from that process that issued the system call, thus potentially +preventing other processes from accessing the cache - including CacheFiles's +cache management daemon (cachefilesd). + +What is required is to temporarily override the security of the process that +issued the system call. We can't, however, just do an in-place change of the +security data as that affects the process as an object, not just as a subject. +This means it may lose signals or ptrace events for example, and affects what +the process looks like in /proc. + +So CacheFiles makes use of a logical split in the security between the +objective security (task->real_cred) and the subjective security (task->cred). +The objective security holds the intrinsic security properties of a process and +is never overridden. This is what appears in /proc, and is what is used when a +process is the target of an operation by some other process (SIGKILL for +example). + +The subjective security holds the active security properties of a process, and +may be overridden. This is not seen externally, and is used whan a process +acts upon another object, for example SIGKILLing another process or opening a +file. + +LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request +for CacheFiles to run in a context of a specific security label, or to create +files and directories with another security label. + + +======================= +STATISTICAL INFORMATION +======================= + +If FS-Cache is compiled with the following option enabled: + + CONFIG_CACHEFILES_HISTOGRAM=y + +then it will gather certain statistics and display them through a proc file. + + (*) /proc/fs/cachefiles/histogram + + cat /proc/fs/cachefiles/histogram + JIFS SECS LOOKUPS MKDIRS CREATES + ===== ===== ========= ========= ========= + + This shows the breakdown of the number of times each amount of time + between 0 jiffies and HZ-1 jiffies a variety of tasks took to run. The + columns are as follows: + + COLUMN TIME MEASUREMENT + ======= ======================================================= + LOOKUPS Length of time to perform a lookup on the backing fs + MKDIRS Length of time to perform a mkdir on the backing fs + CREATES Length of time to perform a create on the backing fs + + Each row shows the number of events that took a particular range of times. + Each step is 1 jiffy in size. The JIFS column indicates the particular + jiffy range covered, and the SECS field the equivalent number of seconds. + + +========= +DEBUGGING +========= + +If CONFIG_CACHEFILES_DEBUG is enabled, the CacheFiles facility can have runtime +debugging enabled by adjusting the value in: + + /sys/module/cachefiles/parameters/debug + +This is a bitmask of debugging streams to enable: + + BIT VALUE STREAM POINT + ======= ======= =============================== ======================= + 0 1 General Function entry trace + 1 2 Function exit trace + 2 4 General + +The appropriate set of values should be OR'd together and the result written to +the control file. For example: + + echo $((1|4|8)) >/sys/module/cachefiles/parameters/debug + +will turn on all function entry debugging. diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt new file mode 100644 index 000000000000..9e94b9491d89 --- /dev/null +++ b/Documentation/filesystems/caching/fscache.txt @@ -0,0 +1,333 @@ + ========================== + General Filesystem Caching + ========================== + +======== +OVERVIEW +======== + +This facility is a general purpose cache for network filesystems, though it +could be used for caching other things such as ISO9660 filesystems too. + +FS-Cache mediates between cache backends (such as CacheFS) and network +filesystems: + + +---------+ + | | +--------------+ + | NFS |--+ | | + | | | +-->| CacheFS | + +---------+ | +----------+ | | /dev/hda5 | + | | | | +--------------+ + +---------+ +-->| | | + | | | |--+ + | AFS |----->| FS-Cache | + | | | |--+ + +---------+ +-->| | | + | | | | +--------------+ + +---------+ | +----------+ | | | + | | | +-->| CacheFiles | + | ISOFS |--+ | /var/cache | + | | +--------------+ + +---------+ + +Or to look at it another way, FS-Cache is a module that provides a caching +facility to a network filesystem such that the cache is transparent to the +user: + + +---------+ + | | + | Server | + | | + +---------+ + | NETWORK + ~~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + | + | +----------+ + V | | + +---------+ | | + | | | | + | NFS |----->| FS-Cache | + | | | |--+ + +---------+ | | | +--------------+ +--------------+ + | | | | | | | | + V +----------+ +-->| CacheFiles |-->| Ext3 | + +---------+ | /var/cache | | /dev/sda6 | + | | +--------------+ +--------------+ + | VFS | ^ ^ + | | | | + +---------+ +--------------+ | + | KERNEL SPACE | | + ~~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|~~~~~~|~~~~ + | USER SPACE | | + V | | + +---------+ +--------------+ + | | | | + | Process | | cachefilesd | + | | | | + +---------+ +--------------+ + + +FS-Cache does not follow the idea of completely loading every netfs file +opened in its entirety into a cache before permitting it to be accessed and +then serving the pages out of that cache rather than the netfs inode because: + + (1) It must be practical to operate without a cache. + + (2) The size of any accessible file must not be limited to the size of the + cache. + + (3) The combined size of all opened files (this includes mapped libraries) + must not be limited to the size of the cache. + + (4) The user should not be forced to download an entire file just to do a + one-off access of a small portion of it (such as might be done with the + "file" program). + +It instead serves the cache out in PAGE_SIZE chunks as and when requested by +the netfs('s) using it. + + +FS-Cache provides the following facilities: + + (1) More than one cache can be used at once. Caches can be selected + explicitly by use of tags. + + (2) Caches can be added / removed at any time. + + (3) The netfs is provided with an interface that allows either party to + withdraw caching facilities from a file (required for (2)). + + (4) The interface to the netfs returns as few errors as possible, preferring + rather to let the netfs remain oblivious. + + (5) Cookies are used to represent indices, files and other objects to the + netfs. The simplest cookie is just a NULL pointer - indicating nothing + cached there. + + (6) The netfs is allowed to propose - dynamically - any index hierarchy it + desires, though it must be aware that the index search function is + recursive, stack space is limited, and indices can only be children of + indices. + + (7) Data I/O is done direct to and from the netfs's pages. The netfs + indicates that page A is at index B of the data-file represented by cookie + C, and that it should be read or written. The cache backend may or may + not start I/O on that page, but if it does, a netfs callback will be + invoked to indicate completion. The I/O may be either synchronous or + asynchronous. + + (8) Cookies can be "retired" upon release. At this point FS-Cache will mark + them as obsolete and the index hierarchy rooted at that point will get + recycled. + + (9) The netfs provides a "match" function for index searches. In addition to + saying whether a match was made or not, this can also specify that an + entry should be updated or deleted. + +(10) As much as possible is done asynchronously. + + +FS-Cache maintains a virtual indexing tree in which all indices, files, objects +and pages are kept. Bits of this tree may actually reside in one or more +caches. + + FSDEF + | + +------------------------------------+ + | | + NFS AFS + | | + +--------------------------+ +-----------+ + | | | | + homedir mirror afs.org redhat.com + | | | + +------------+ +---------------+ +----------+ + | | | | | | + 00001 00002 00007 00125 vol00001 vol00002 + | | | | | + +---+---+ +-----+ +---+ +------+------+ +-----+----+ + | | | | | | | | | | | | | +PG0 PG1 PG2 PG0 XATTR PG0 PG1 DIRENT DIRENT DIRENT R/W R/O Bak + | | + PG0 +-------+ + | | + 00001 00003 + | + +---+---+ + | | | + PG0 PG1 PG2 + +In the example above, you can see two netfs's being backed: NFS and AFS. These +have different index hierarchies: + + (*) The NFS primary index contains per-server indices. Each server index is + indexed by NFS file handles to get data file objects. Each data file + objects can have an array of pages, but may also have further child + objects, such as extended attributes and directory entries. Extended + attribute objects themselves have page-array contents. + + (*) The AFS primary index contains per-cell indices. Each cell index contains + per-logical-volume indices. Each of volume index contains up to three + indices for the read-write, read-only and backup mirrors of those volumes. + Each of these contains vnode data file objects, each of which contains an + array of pages. + +The very top index is the FS-Cache master index in which individual netfs's +have entries. + +Any index object may reside in more than one cache, provided it only has index +children. Any index with non-index object children will be assumed to only +reside in one cache. + + +The netfs API to FS-Cache can be found in: + + Documentation/filesystems/caching/netfs-api.txt + +The cache backend API to FS-Cache can be found in: + + Documentation/filesystems/caching/backend-api.txt + +A description of the internal representations and object state machine can be +found in: + + Documentation/filesystems/caching/object.txt + + +======================= +STATISTICAL INFORMATION +======================= + +If FS-Cache is compiled with the following options enabled: + + CONFIG_FSCACHE_STATS=y + CONFIG_FSCACHE_HISTOGRAM=y + +then it will gather certain statistics and display them through a number of +proc files. + + (*) /proc/fs/fscache/stats + + This shows counts of a number of events that can happen in FS-Cache: + + CLASS EVENT MEANING + ======= ======= ======================================================= + Cookies idx=N Number of index cookies allocated + dat=N Number of data storage cookies allocated + spc=N Number of special cookies allocated + Objects alc=N Number of objects allocated + nal=N Number of object allocation failures + avl=N Number of objects that reached the available state + ded=N Number of objects that reached the dead state + ChkAux non=N Number of objects that didn't have a coherency check + ok=N Number of objects that passed a coherency check + upd=N Number of objects that needed a coherency data update + obs=N Number of objects that were declared obsolete + Pages mrk=N Number of pages marked as being cached + unc=N Number of uncache page requests seen + Acquire n=N Number of acquire cookie requests seen + nul=N Number of acq reqs given a NULL parent + noc=N Number of acq reqs rejected due to no cache available + ok=N Number of acq reqs succeeded + nbf=N Number of acq reqs rejected due to error + oom=N Number of acq reqs failed on ENOMEM + Lookups n=N Number of lookup calls made on cache backends + neg=N Number of negative lookups made + pos=N Number of positive lookups made + crt=N Number of objects created by lookup + Updates n=N Number of update cookie requests seen + nul=N Number of upd reqs given a NULL parent + run=N Number of upd reqs granted CPU time + Relinqs n=N Number of relinquish cookie requests seen + nul=N Number of rlq reqs given a NULL parent + wcr=N Number of rlq reqs waited on completion of creation + AttrChg n=N Number of attribute changed requests seen + ok=N Number of attr changed requests queued + nbf=N Number of attr changed rejected -ENOBUFS + oom=N Number of attr changed failed -ENOMEM + run=N Number of attr changed ops given CPU time + Allocs n=N Number of allocation requests seen + ok=N Number of successful alloc reqs + wt=N Number of alloc reqs that waited on lookup completion + nbf=N Number of alloc reqs rejected -ENOBUFS + ops=N Number of alloc reqs submitted + owt=N Number of alloc reqs waited for CPU time + Retrvls n=N Number of retrieval (read) requests seen + ok=N Number of successful retr reqs + wt=N Number of retr reqs that waited on lookup completion + nod=N Number of retr reqs returned -ENODATA + nbf=N Number of retr reqs rejected -ENOBUFS + int=N Number of retr reqs aborted -ERESTARTSYS + oom=N Number of retr reqs failed -ENOMEM + ops=N Number of retr reqs submitted + owt=N Number of retr reqs waited for CPU time + Stores n=N Number of storage (write) requests seen + ok=N Number of successful store reqs + agn=N Number of store reqs on a page already pending storage + nbf=N Number of store reqs rejected -ENOBUFS + oom=N Number of store reqs failed -ENOMEM + ops=N Number of store reqs submitted + run=N Number of store reqs granted CPU time + Ops pend=N Number of times async ops added to pending queues + run=N Number of times async ops given CPU time + enq=N Number of times async ops queued for processing + dfr=N Number of async ops queued for deferred release + rel=N Number of async ops released + gc=N Number of deferred-release async ops garbage collected + + + (*) /proc/fs/fscache/histogram + + cat /proc/fs/fscache/histogram + JIFS SECS OBJ INST OP RUNS OBJ RUNS RETRV DLY RETRIEVLS + ===== ===== ========= ========= ========= ========= ========= + + This shows the breakdown of the number of times each amount of time + between 0 jiffies and HZ-1 jiffies a variety of tasks took to run. The + columns are as follows: + + COLUMN TIME MEASUREMENT + ======= ======================================================= + OBJ INST Length of time to instantiate an object + OP RUNS Length of time a call to process an operation took + OBJ RUNS Length of time a call to process an object event took + RETRV DLY Time between an requesting a read and lookup completing + RETRIEVLS Time between beginning and end of a retrieval + + Each row shows the number of events that took a particular range of times. + Each step is 1 jiffy in size. The JIFS column indicates the particular + jiffy range covered, and the SECS field the equivalent number of seconds. + + +========= +DEBUGGING +========= + +If CONFIG_FSCACHE_DEBUG is enabled, the FS-Cache facility can have runtime +debugging enabled by adjusting the value in: + + /sys/module/fscache/parameters/debug + +This is a bitmask of debugging streams to enable: + + BIT VALUE STREAM POINT + ======= ======= =============================== ======================= + 0 1 Cache management Function entry trace + 1 2 Function exit trace + 2 4 General + 3 8 Cookie management Function entry trace + 4 16 Function exit trace + 5 32 General + 6 64 Page handling Function entry trace + 7 128 Function exit trace + 8 256 General + 9 512 Operation management Function entry trace + 10 1024 Function exit trace + 11 2048 General + +The appropriate set of values should be OR'd together and the result written to +the control file. For example: + + echo $((1|8|64)) >/sys/module/fscache/parameters/debug + +will turn on all function entry debugging. diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt new file mode 100644 index 000000000000..4db125b3a5c6 --- /dev/null +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -0,0 +1,778 @@ + =============================== + FS-CACHE NETWORK FILESYSTEM API + =============================== + +There's an API by which a network filesystem can make use of the FS-Cache +facilities. This is based around a number of principles: + + (1) Caches can store a number of different object types. There are two main + object types: indices and files. The first is a special type used by + FS-Cache to make finding objects faster and to make retiring of groups of + objects easier. + + (2) Every index, file or other object is represented by a cookie. This cookie + may or may not have anything associated with it, but the netfs doesn't + need to care. + + (3) Barring the top-level index (one entry per cached netfs), the index + hierarchy for each netfs is structured according the whim of the netfs. + +This API is declared in <linux/fscache.h>. + +This document contains the following sections: + + (1) Network filesystem definition + (2) Index definition + (3) Object definition + (4) Network filesystem (un)registration + (5) Cache tag lookup + (6) Index registration + (7) Data file registration + (8) Miscellaneous object registration + (9) Setting the data file size + (10) Page alloc/read/write + (11) Page uncaching + (12) Index and data file update + (13) Miscellaneous cookie operations + (14) Cookie unregistration + (15) Index and data file invalidation + (16) FS-Cache specific page flags. + + +============================= +NETWORK FILESYSTEM DEFINITION +============================= + +FS-Cache needs a description of the network filesystem. This is specified +using a record of the following structure: + + struct fscache_netfs { + uint32_t version; + const char *name; + struct fscache_cookie *primary_index; + ... + }; + +This first two fields should be filled in before registration, and the third +will be filled in by the registration function; any other fields should just be +ignored and are for internal use only. + +The fields are: + + (1) The name of the netfs (used as the key in the toplevel index). + + (2) The version of the netfs (if the name matches but the version doesn't, the + entire in-cache hierarchy for this netfs will be scrapped and begun + afresh). + + (3) The cookie representing the primary index will be allocated according to + another parameter passed into the registration function. + +For example, kAFS (linux/fs/afs/) uses the following definitions to describe +itself: + + struct fscache_netfs afs_cache_netfs = { + .version = 0, + .name = "afs", + }; + + +================ +INDEX DEFINITION +================ + +Indices are used for two purposes: + + (1) To aid the finding of a file based on a series of keys (such as AFS's + "cell", "volume ID", "vnode ID"). + + (2) To make it easier to discard a subset of all the files cached based around + a particular key - for instance to mirror the removal of an AFS volume. + +However, since it's unlikely that any two netfs's are going to want to define +their index hierarchies in quite the same way, FS-Cache tries to impose as few +restraints as possible on how an index is structured and where it is placed in +the tree. The netfs can even mix indices and data files at the same level, but +it's not recommended. + +Each index entry consists of a key of indeterminate length plus some auxilliary +data, also of indeterminate length. + +There are some limits on indices: + + (1) Any index containing non-index objects should be restricted to a single + cache. Any such objects created within an index will be created in the + first cache only. The cache in which an index is created can be + controlled by cache tags (see below). + + (2) The entry data must be atomically journallable, so it is limited to about + 400 bytes at present. At least 400 bytes will be available. + + (3) The depth of the index tree should be judged with care as the search + function is recursive. Too many layers will run the kernel out of stack. + + +================= +OBJECT DEFINITION +================= + +To define an object, a structure of the following type should be filled out: + + struct fscache_cookie_def + { + uint8_t name[16]; + uint8_t type; + + struct fscache_cache_tag *(*select_cache)( + const void *parent_netfs_data, + const void *cookie_netfs_data); + + uint16_t (*get_key)(const void *cookie_netfs_data, + void *buffer, + uint16_t bufmax); + + void (*get_attr)(const void *cookie_netfs_data, + uint64_t *size); + + uint16_t (*get_aux)(const void *cookie_netfs_data, + void *buffer, + uint16_t bufmax); + + enum fscache_checkaux (*check_aux)(void *cookie_netfs_data, + const void *data, + uint16_t datalen); + + void (*get_context)(void *cookie_netfs_data, void *context); + + void (*put_context)(void *cookie_netfs_data, void *context); + + void (*mark_pages_cached)(void *cookie_netfs_data, + struct address_space *mapping, + struct pagevec *cached_pvec); + + void (*now_uncached)(void *cookie_netfs_data); + }; + +This has the following fields: + + (1) The type of the object [mandatory]. + + This is one of the following values: + + (*) FSCACHE_COOKIE_TYPE_INDEX + + This defines an index, which is a special FS-Cache type. + + (*) FSCACHE_COOKIE_TYPE_DATAFILE + + This defines an ordinary data file. + + (*) Any other value between 2 and 255 + + This defines an extraordinary object such as an XATTR. + + (2) The name of the object type (NUL terminated unless all 16 chars are used) + [optional]. + + (3) A function to select the cache in which to store an index [optional]. + + This function is invoked when an index needs to be instantiated in a cache + during the instantiation of a non-index object. Only the immediate index + parent for the non-index object will be queried. Any indices above that + in the hierarchy may be stored in multiple caches. This function does not + need to be supplied for any non-index object or any index that will only + have index children. + + If this function is not supplied or if it returns NULL then the first + cache in the parent's list will be chosed, or failing that, the first + cache in the master list. + + (4) A function to retrieve an object's key from the netfs [mandatory]. + + This function will be called with the netfs data that was passed to the + cookie acquisition function and the maximum length of key data that it may + provide. It should write the required key data into the given buffer and + return the quantity it wrote. + + (5) A function to retrieve attribute data from the netfs [optional]. + + This function will be called with the netfs data that was passed to the + cookie acquisition function. It should return the size of the file if + this is a data file. The size may be used to govern how much cache must + be reserved for this file in the cache. + + If the function is absent, a file size of 0 is assumed. + + (6) A function to retrieve auxilliary data from the netfs [optional]. + + This function will be called with the netfs data that was passed to the + cookie acquisition function and the maximum length of auxilliary data that + it may provide. It should write the auxilliary data into the given buffer + and return the quantity it wrote. + + If this function is absent, the auxilliary data length will be set to 0. + + The length of the auxilliary data buffer may be dependent on the key + length. A netfs mustn't rely on being able to provide more than 400 bytes + for both. + + (7) A function to check the auxilliary data [optional]. + + This function will be called to check that a match found in the cache for + this object is valid. For instance with AFS it could check the auxilliary + data against the data version number returned by the server to determine + whether the index entry in a cache is still valid. + + If this function is absent, it will be assumed that matching objects in a + cache are always valid. + + If present, the function should return one of the following values: + + (*) FSCACHE_CHECKAUX_OKAY - the entry is okay as is + (*) FSCACHE_CHECKAUX_NEEDS_UPDATE - the entry requires update + (*) FSCACHE_CHECKAUX_OBSOLETE - the entry should be deleted + + This function can also be used to extract data from the auxilliary data in + the cache and copy it into the netfs's structures. + + (8) A pair of functions to manage contexts for the completion callback + [optional]. + + The cache read/write functions are passed a context which is then passed + to the I/O completion callback function. To ensure this context remains + valid until after the I/O completion is called, two functions may be + provided: one to get an extra reference on the context, and one to drop a + reference to it. + + If the context is not used or is a type of object that won't go out of + scope, then these functions are not required. These functions are not + required for indices as indices may not contain data. These functions may + be called in interrupt context and so may not sleep. + + (9) A function to mark a page as retaining cache metadata [optional]. + + This is called by the cache to indicate that it is retaining in-memory + information for this page and that the netfs should uncache the page when + it has finished. This does not indicate whether there's data on the disk + or not. Note that several pages at once may be presented for marking. + + The PG_fscache bit is set on the pages before this function would be + called, so the function need not be provided if this is sufficient. + + This function is not required for indices as they're not permitted data. + +(10) A function to unmark all the pages retaining cache metadata [mandatory]. + + This is called by FS-Cache to indicate that a backing store is being + unbound from a cookie and that all the marks on the pages should be + cleared to prevent confusion. Note that the cache will have torn down all + its tracking information so that the pages don't need to be explicitly + uncached. + + This function is not required for indices as they're not permitted data. + + +=================================== +NETWORK FILESYSTEM (UN)REGISTRATION +=================================== + +The first step is to declare the network filesystem to the cache. This also +involves specifying the layout of the primary index (for AFS, this would be the +"cell" level). + +The registration function is: + + int fscache_register_netfs(struct fscache_netfs *netfs); + +It just takes a pointer to the netfs definition. It returns 0 or an error as +appropriate. + +For kAFS, registration is done as follows: + + ret = fscache_register_netfs(&afs_cache_netfs); + +The last step is, of course, unregistration: + + void fscache_unregister_netfs(struct fscache_netfs *netfs); + + +================ +CACHE TAG LOOKUP +================ + +FS-Cache permits the use of more than one cache. To permit particular index +subtrees to be bound to particular caches, the second step is to look up cache +representation tags. This step is optional; it can be left entirely up to +FS-Cache as to which cache should be used. The problem with doing that is that +FS-Cache will always pick the first cache that was registered. + +To get the representation for a named tag: + + struct fscache_cache_tag *fscache_lookup_cache_tag(const char *name); + +This takes a text string as the name and returns a representation of a tag. It +will never return an error. It may return a dummy tag, however, if it runs out +of memory; this will inhibit caching with this tag. + +Any representation so obtained must be released by passing it to this function: + + void fscache_release_cache_tag(struct fscache_cache_tag *tag); + +The tag will be retrieved by FS-Cache when it calls the object definition +operation select_cache(). + + +================== +INDEX REGISTRATION +================== + +The third step is to inform FS-Cache about part of an index hierarchy that can +be used to locate files. This is done by requesting a cookie for each index in +the path to the file: + + struct fscache_cookie * + fscache_acquire_cookie(struct fscache_cookie *parent, + const struct fscache_object_def *def, + void *netfs_data); + +This function creates an index entry in the index represented by parent, +filling in the index entry by calling the operations pointed to by def. + +Note that this function never returns an error - all errors are handled +internally. It may, however, return NULL to indicate no cookie. It is quite +acceptable to pass this token back to this function as the parent to another +acquisition (or even to the relinquish cookie, read page and write page +functions - see below). + +Note also that no indices are actually created in a cache until a non-index +object needs to be created somewhere down the hierarchy. Furthermore, an index +may be created in several different caches independently at different times. +This is all handled transparently, and the netfs doesn't see any of it. + +For example, with AFS, a cell would be added to the primary index. This index +entry would have a dependent inode containing a volume location index for the +volume mappings within this cell: + + cell->cache = + fscache_acquire_cookie(afs_cache_netfs.primary_index, + &afs_cell_cache_index_def, + cell); + +Then when a volume location was accessed, it would be entered into the cell's +index and an inode would be allocated that acts as a volume type and hash chain +combination: + + vlocation->cache = + fscache_acquire_cookie(cell->cache, + &afs_vlocation_cache_index_def, + vlocation); + +And then a particular flavour of volume (R/O for example) could be added to +that index, creating another index for vnodes (AFS inode equivalents): + + volume->cache = + fscache_acquire_cookie(vlocation->cache, + &afs_volume_cache_index_def, + volume); + + +====================== +DATA FILE REGISTRATION +====================== + +The fourth step is to request a data file be created in the cache. This is +identical to index cookie acquisition. The only difference is that the type in +the object definition should be something other than index type. + + vnode->cache = + fscache_acquire_cookie(volume->cache, + &afs_vnode_cache_object_def, + vnode); + + +================================= +MISCELLANEOUS OBJECT REGISTRATION +================================= + +An optional step is to request an object of miscellaneous type be created in +the cache. This is almost identical to index cookie acquisition. The only +difference is that the type in the object definition should be something other +than index type. Whilst the parent object could be an index, it's more likely +it would be some other type of object such as a data file. + + xattr->cache = + fscache_acquire_cookie(vnode->cache, + &afs_xattr_cache_object_def, + xattr); + +Miscellaneous objects might be used to store extended attributes or directory +entries for example. + + +========================== +SETTING THE DATA FILE SIZE +========================== + +The fifth step is to set the physical attributes of the file, such as its size. +This doesn't automatically reserve any space in the cache, but permits the +cache to adjust its metadata for data tracking appropriately: + + int fscache_attr_changed(struct fscache_cookie *cookie); + +The cache will return -ENOBUFS if there is no backing cache or if there is no +space to allocate any extra metadata required in the cache. The attributes +will be accessed with the get_attr() cookie definition operation. + +Note that attempts to read or write data pages in the cache over this size may +be rebuffed with -ENOBUFS. + +This operation schedules an attribute adjustment to happen asynchronously at +some point in the future, and as such, it may happen after the function returns +to the caller. The attribute adjustment excludes read and write operations. + + +===================== +PAGE READ/ALLOC/WRITE +===================== + +And the sixth step is to store and retrieve pages in the cache. There are +three functions that are used to do this. + +Note: + + (1) A page should not be re-read or re-allocated without uncaching it first. + + (2) A read or allocated page must be uncached when the netfs page is released + from the pagecache. + + (3) A page should only be written to the cache if previous read or allocated. + +This permits the cache to maintain its page tracking in proper order. + + +PAGE READ +--------- + +Firstly, the netfs should ask FS-Cache to examine the caches and read the +contents cached for a particular page of a particular file if present, or else +allocate space to store the contents if not: + + typedef + void (*fscache_rw_complete_t)(struct page *page, + void *context, + int error); + + int fscache_read_or_alloc_page(struct fscache_cookie *cookie, + struct page *page, + fscache_rw_complete_t end_io_func, + void *context, + gfp_t gfp); + +The cookie argument must specify a cookie for an object that isn't an index, +the page specified will have the data loaded into it (and is also used to +specify the page number), and the gfp argument is used to control how any +memory allocations made are satisfied. + +If the cookie indicates the inode is not cached: + + (1) The function will return -ENOBUFS. + +Else if there's a copy of the page resident in the cache: + + (1) The mark_pages_cached() cookie operation will be called on that page. + + (2) The function will submit a request to read the data from the cache's + backing device directly into the page specified. + + (3) The function will return 0. + + (4) When the read is complete, end_io_func() will be invoked with: + + (*) The netfs data supplied when the cookie was created. + + (*) The page descriptor. + + (*) The context argument passed to the above function. This will be + maintained with the get_context/put_context functions mentioned above. + + (*) An argument that's 0 on success or negative for an error code. + + If an error occurs, it should be assumed that the page contains no usable + data. + + end_io_func() will be called in process context if the read is results in + an error, but it might be called in interrupt context if the read is + successful. + +Otherwise, if there's not a copy available in cache, but the cache may be able +to store the page: + + (1) The mark_pages_cached() cookie operation will be called on that page. + + (2) A block may be reserved in the cache and attached to the object at the + appropriate place. + + (3) The function will return -ENODATA. + +This function may also return -ENOMEM or -EINTR, in which case it won't have +read any data from the cache. + + +PAGE ALLOCATE +------------- + +Alternatively, if there's not expected to be any data in the cache for a page +because the file has been extended, a block can simply be allocated instead: + + int fscache_alloc_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp); + +This is similar to the fscache_read_or_alloc_page() function, except that it +never reads from the cache. It will return 0 if a block has been allocated, +rather than -ENODATA as the other would. One or the other must be performed +before writing to the cache. + +The mark_pages_cached() cookie operation will be called on the page if +successful. + + +PAGE WRITE +---------- + +Secondly, if the netfs changes the contents of the page (either due to an +initial download or if a user performs a write), then the page should be +written back to the cache: + + int fscache_write_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp); + +The cookie argument must specify a data file cookie, the page specified should +contain the data to be written (and is also used to specify the page number), +and the gfp argument is used to control how any memory allocations made are +satisfied. + +The page must have first been read or allocated successfully and must not have +been uncached before writing is performed. + +If the cookie indicates the inode is not cached then: + + (1) The function will return -ENOBUFS. + +Else if space can be allocated in the cache to hold this page: + + (1) PG_fscache_write will be set on the page. + + (2) The function will submit a request to write the data to cache's backing + device directly from the page specified. + + (3) The function will return 0. + + (4) When the write is complete PG_fscache_write is cleared on the page and + anyone waiting for that bit will be woken up. + +Else if there's no space available in the cache, -ENOBUFS will be returned. It +is also possible for the PG_fscache_write bit to be cleared when no write took +place if unforeseen circumstances arose (such as a disk error). + +Writing takes place asynchronously. + + +MULTIPLE PAGE READ +------------------ + +A facility is provided to read several pages at once, as requested by the +readpages() address space operation: + + int fscache_read_or_alloc_pages(struct fscache_cookie *cookie, + struct address_space *mapping, + struct list_head *pages, + int *nr_pages, + fscache_rw_complete_t end_io_func, + void *context, + gfp_t gfp); + +This works in a similar way to fscache_read_or_alloc_page(), except: + + (1) Any page it can retrieve data for is removed from pages and nr_pages and + dispatched for reading to the disk. Reads of adjacent pages on disk may + be merged for greater efficiency. + + (2) The mark_pages_cached() cookie operation will be called on several pages + at once if they're being read or allocated. + + (3) If there was an general error, then that error will be returned. + + Else if some pages couldn't be allocated or read, then -ENOBUFS will be + returned. + + Else if some pages couldn't be read but were allocated, then -ENODATA will + be returned. + + Otherwise, if all pages had reads dispatched, then 0 will be returned, the + list will be empty and *nr_pages will be 0. + + (4) end_io_func will be called once for each page being read as the reads + complete. It will be called in process context if error != 0, but it may + be called in interrupt context if there is no error. + +Note that a return of -ENODATA, -ENOBUFS or any other error does not preclude +some of the pages being read and some being allocated. Those pages will have +been marked appropriately and will need uncaching. + + +============== +PAGE UNCACHING +============== + +To uncache a page, this function should be called: + + void fscache_uncache_page(struct fscache_cookie *cookie, + struct page *page); + +This function permits the cache to release any in-memory representation it +might be holding for this netfs page. This function must be called once for +each page on which the read or write page functions above have been called to +make sure the cache's in-memory tracking information gets torn down. + +Note that pages can't be explicitly deleted from the a data file. The whole +data file must be retired (see the relinquish cookie function below). + +Furthermore, note that this does not cancel the asynchronous read or write +operation started by the read/alloc and write functions, so the page +invalidation and release functions must use: + + bool fscache_check_page_write(struct fscache_cookie *cookie, + struct page *page); + +to see if a page is being written to the cache, and: + + void fscache_wait_on_page_write(struct fscache_cookie *cookie, + struct page *page); + +to wait for it to finish if it is. + + +========================== +INDEX AND DATA FILE UPDATE +========================== + +To request an update of the index data for an index or other object, the +following function should be called: + + void fscache_update_cookie(struct fscache_cookie *cookie); + +This function will refer back to the netfs_data pointer stored in the cookie by +the acquisition function to obtain the data to write into each revised index +entry. The update method in the parent index definition will be called to +transfer the data. + +Note that partial updates may happen automatically at other times, such as when +data blocks are added to a data file object. + + +=============================== +MISCELLANEOUS COOKIE OPERATIONS +=============================== + +There are a number of operations that can be used to control cookies: + + (*) Cookie pinning: + + int fscache_pin_cookie(struct fscache_cookie *cookie); + void fscache_unpin_cookie(struct fscache_cookie *cookie); + + These operations permit data cookies to be pinned into the cache and to + have the pinning removed. They are not permitted on index cookies. + + The pinning function will return 0 if successful, -ENOBUFS in the cookie + isn't backed by a cache, -EOPNOTSUPP if the cache doesn't support pinning, + -ENOSPC if there isn't enough space to honour the operation, -ENOMEM or + -EIO if there's any other problem. + + (*) Data space reservation: + + int fscache_reserve_space(struct fscache_cookie *cookie, loff_t size); + + This permits a netfs to request cache space be reserved to store up to the + given amount of a file. It is permitted to ask for more than the current + size of the file to allow for future file expansion. + + If size is given as zero then the reservation will be cancelled. + + The function will return 0 if successful, -ENOBUFS in the cookie isn't + backed by a cache, -EOPNOTSUPP if the cache doesn't support reservations, + -ENOSPC if there isn't enough space to honour the operation, -ENOMEM or + -EIO if there's any other problem. + + Note that this doesn't pin an object in a cache; it can still be culled to + make space if it's not in use. + + +===================== +COOKIE UNREGISTRATION +===================== + +To get rid of a cookie, this function should be called. + + void fscache_relinquish_cookie(struct fscache_cookie *cookie, + int retire); + +If retire is non-zero, then the object will be marked for recycling, and all +copies of it will be removed from all active caches in which it is present. +Not only that but all child objects will also be retired. + +If retire is zero, then the object may be available again when next the +acquisition function is called. Retirement here will overrule the pinning on a +cookie. + +One very important note - relinquish must NOT be called for a cookie unless all +the cookies for "child" indices, objects and pages have been relinquished +first. + + +================================ +INDEX AND DATA FILE INVALIDATION +================================ + +There is no direct way to invalidate an index subtree or a data file. To do +this, the caller should relinquish and retire the cookie they have, and then +acquire a new one. + + +=========================== +FS-CACHE SPECIFIC PAGE FLAG +=========================== + +FS-Cache makes use of a page flag, PG_private_2, for its own purpose. This is +given the alternative name PG_fscache. + +PG_fscache is used to indicate that the page is known by the cache, and that +the cache must be informed if the page is going to go away. It's an indication +to the netfs that the cache has an interest in this page, where an interest may +be a pointer to it, resources allocated or reserved for it, or I/O in progress +upon it. + +The netfs can use this information in methods such as releasepage() to +determine whether it needs to uncache a page or update it. + +Furthermore, if this bit is set, releasepage() and invalidatepage() operations +will be called on a page to get rid of it, even if PG_private is not set. This +allows caching to attempted on a page before read_cache_pages() to be called +after fscache_read_or_alloc_pages() as the former will try and release pages it +was given under certain circumstances. + +This bit does not overlap with such as PG_private. This means that FS-Cache +can be used with a filesystem that uses the block buffering code. + +There are a number of operations defined on this flag: + + int PageFsCache(struct page *page); + void SetPageFsCache(struct page *page) + void ClearPageFsCache(struct page *page) + int TestSetPageFsCache(struct page *page) + int TestClearPageFsCache(struct page *page) + +These functions are bit test, bit set, bit clear, bit test and set and bit +test and clear operations on PG_fscache. diff --git a/Documentation/filesystems/caching/object.txt b/Documentation/filesystems/caching/object.txt new file mode 100644 index 000000000000..e8b0a35d8fe5 --- /dev/null +++ b/Documentation/filesystems/caching/object.txt @@ -0,0 +1,313 @@ + ==================================================== + IN-KERNEL CACHE OBJECT REPRESENTATION AND MANAGEMENT + ==================================================== + +By: David Howells <dhowells@redhat.com> + +Contents: + + (*) Representation + + (*) Object management state machine. + + - Provision of cpu time. + - Locking simplification. + + (*) The set of states. + + (*) The set of events. + + +============== +REPRESENTATION +============== + +FS-Cache maintains an in-kernel representation of each object that a netfs is +currently interested in. Such objects are represented by the fscache_cookie +struct and are referred to as cookies. + +FS-Cache also maintains a separate in-kernel representation of the objects that +a cache backend is currently actively caching. Such objects are represented by +the fscache_object struct. The cache backends allocate these upon request, and +are expected to embed them in their own representations. These are referred to +as objects. + +There is a 1:N relationship between cookies and objects. A cookie may be +represented by multiple objects - an index may exist in more than one cache - +or even by no objects (it may not be cached). + +Furthermore, both cookies and objects are hierarchical. The two hierarchies +correspond, but the cookies tree is a superset of the union of the object trees +of multiple caches: + + NETFS INDEX TREE : CACHE 1 : CACHE 2 + : : + : +-----------+ : + +----------->| IObject | : + +-----------+ | : +-----------+ : + | ICookie |-------+ : | : + +-----------+ | : | : +-----------+ + | +------------------------------>| IObject | + | : | : +-----------+ + | : V : | + | : +-----------+ : | + V +----------->| IObject | : | + +-----------+ | : +-----------+ : | + | ICookie |-------+ : | : V + +-----------+ | : | : +-----------+ + | +------------------------------>| IObject | + +-----+-----+ : | : +-----------+ + | | : | : | + V | : V : | + +-----------+ | : +-----------+ : | + | ICookie |------------------------->| IObject | : | + +-----------+ | : +-----------+ : | + | V : | : V + | +-----------+ : | : +-----------+ + | | ICookie |-------------------------------->| IObject | + | +-----------+ : | : +-----------+ + V | : V : | + +-----------+ | : +-----------+ : | + | DCookie |------------------------->| DObject | : | + +-----------+ | : +-----------+ : | + | : : | + +-------+-------+ : : | + | | : : | + V V : : V + +-----------+ +-----------+ : : +-----------+ + | DCookie | | DCookie |------------------------>| DObject | + +-----------+ +-----------+ : : +-----------+ + : : + +In the above illustration, ICookie and IObject represent indices and DCookie +and DObject represent data storage objects. Indices may have representation in +multiple caches, but currently, non-index objects may not. Objects of any type +may also be entirely unrepresented. + +As far as the netfs API goes, the netfs is only actually permitted to see +pointers to the cookies. The cookies themselves and any objects attached to +those cookies are hidden from it. + + +=============================== +OBJECT MANAGEMENT STATE MACHINE +=============================== + +Within FS-Cache, each active object is managed by its own individual state +machine. The state for an object is kept in the fscache_object struct, in +object->state. A cookie may point to a set of objects that are in different +states. + +Each state has an action associated with it that is invoked when the machine +wakes up in that state. There are four logical sets of states: + + (1) Preparation: states that wait for the parent objects to become ready. The + representations are hierarchical, and it is expected that an object must + be created or accessed with respect to its parent object. + + (2) Initialisation: states that perform lookups in the cache and validate + what's found and that create on disk any missing metadata. + + (3) Normal running: states that allow netfs operations on objects to proceed + and that update the state of objects. + + (4) Termination: states that detach objects from their netfs cookies, that + delete objects from disk, that handle disk and system errors and that free + up in-memory resources. + + +In most cases, transitioning between states is in response to signalled events. +When a state has finished processing, it will usually set the mask of events in +which it is interested (object->event_mask) and relinquish the worker thread. +Then when an event is raised (by calling fscache_raise_event()), if the event +is not masked, the object will be queued for processing (by calling +fscache_enqueue_object()). + + +PROVISION OF CPU TIME +--------------------- + +The work to be done by the various states is given CPU time by the threads of +the slow work facility (see Documentation/slow-work.txt). This is used in +preference to the workqueue facility because: + + (1) Threads may be completely occupied for very long periods of time by a + particular work item. These state actions may be doing sequences of + synchronous, journalled disk accesses (lookup, mkdir, create, setxattr, + getxattr, truncate, unlink, rmdir, rename). + + (2) Threads may do little actual work, but may rather spend a lot of time + sleeping on I/O. This means that single-threaded and 1-per-CPU-threaded + workqueues don't necessarily have the right numbers of threads. + + +LOCKING SIMPLIFICATION +---------------------- + +Because only one worker thread may be operating on any particular object's +state machine at once, this simplifies the locking, particularly with respect +to disconnecting the netfs's representation of a cache object (fscache_cookie) +from the cache backend's representation (fscache_object) - which may be +requested from either end. + + +================= +THE SET OF STATES +================= + +The object state machine has a set of states that it can be in. There are +preparation states in which the object sets itself up and waits for its parent +object to transit to a state that allows access to its children: + + (1) State FSCACHE_OBJECT_INIT. + + Initialise the object and wait for the parent object to become active. In + the cache, it is expected that it will not be possible to look an object + up from the parent object, until that parent object itself has been looked + up. + +There are initialisation states in which the object sets itself up and accesses +disk for the object metadata: + + (2) State FSCACHE_OBJECT_LOOKING_UP. + + Look up the object on disk, using the parent as a starting point. + FS-Cache expects the cache backend to probe the cache to see whether this + object is represented there, and if it is, to see if it's valid (coherency + management). + + The cache should call fscache_object_lookup_negative() to indicate lookup + failure for whatever reason, and should call fscache_obtained_object() to + indicate success. + + At the completion of lookup, FS-Cache will let the netfs go ahead with + read operations, no matter whether the file is yet cached. If not yet + cached, read operations will be immediately rejected with ENODATA until + the first known page is uncached - as to that point there can be no data + to be read out of the cache for that file that isn't currently also held + in the pagecache. + + (3) State FSCACHE_OBJECT_CREATING. + + Create an object on disk, using the parent as a starting point. This + happens if the lookup failed to find the object, or if the object's + coherency data indicated what's on disk is out of date. In this state, + FS-Cache expects the cache to create + + The cache should call fscache_obtained_object() if creation completes + successfully, fscache_object_lookup_negative() otherwise. + + At the completion of creation, FS-Cache will start processing write + operations the netfs has queued for an object. If creation failed, the + write ops will be transparently discarded, and nothing recorded in the + cache. + +There are some normal running states in which the object spends its time +servicing netfs requests: + + (4) State FSCACHE_OBJECT_AVAILABLE. + + A transient state in which pending operations are started, child objects + are permitted to advance from FSCACHE_OBJECT_INIT state, and temporary + lookup data is freed. + + (5) State FSCACHE_OBJECT_ACTIVE. + + The normal running state. In this state, requests the netfs makes will be + passed on to the cache. + + (6) State FSCACHE_OBJECT_UPDATING. + + The state machine comes here to update the object in the cache from the + netfs's records. This involves updating the auxiliary data that is used + to maintain coherency. + +And there are terminal states in which an object cleans itself up, deallocates +memory and potentially deletes stuff from disk: + + (7) State FSCACHE_OBJECT_LC_DYING. + + The object comes here if it is dying because of a lookup or creation + error. This would be due to a disk error or system error of some sort. + Temporary data is cleaned up, and the parent is released. + + (8) State FSCACHE_OBJECT_DYING. + + The object comes here if it is dying due to an error, because its parent + cookie has been relinquished by the netfs or because the cache is being + withdrawn. + + Any child objects waiting on this one are given CPU time so that they too + can destroy themselves. This object waits for all its children to go away + before advancing to the next state. + + (9) State FSCACHE_OBJECT_ABORT_INIT. + + The object comes to this state if it was waiting on its parent in + FSCACHE_OBJECT_INIT, but its parent died. The object will destroy itself + so that the parent may proceed from the FSCACHE_OBJECT_DYING state. + +(10) State FSCACHE_OBJECT_RELEASING. +(11) State FSCACHE_OBJECT_RECYCLING. + + The object comes to one of these two states when dying once it is rid of + all its children, if it is dying because the netfs relinquished its + cookie. In the first state, the cached data is expected to persist, and + in the second it will be deleted. + +(12) State FSCACHE_OBJECT_WITHDRAWING. + + The object transits to this state if the cache decides it wants to + withdraw the object from service, perhaps to make space, but also due to + error or just because the whole cache is being withdrawn. + +(13) State FSCACHE_OBJECT_DEAD. + + The object transits to this state when the in-memory object record is + ready to be deleted. The object processor shouldn't ever see an object in + this state. + + +THE SET OF EVENTS +----------------- + +There are a number of events that can be raised to an object state machine: + + (*) FSCACHE_OBJECT_EV_UPDATE + + The netfs requested that an object be updated. The state machine will ask + the cache backend to update the object, and the cache backend will ask the + netfs for details of the change through its cookie definition ops. + + (*) FSCACHE_OBJECT_EV_CLEARED + + This is signalled in two circumstances: + + (a) when an object's last child object is dropped and + + (b) when the last operation outstanding on an object is completed. + + This is used to proceed from the dying state. + + (*) FSCACHE_OBJECT_EV_ERROR + + This is signalled when an I/O error occurs during the processing of some + object. + + (*) FSCACHE_OBJECT_EV_RELEASE + (*) FSCACHE_OBJECT_EV_RETIRE + + These are signalled when the netfs relinquishes a cookie it was using. + The event selected depends on whether the netfs asks for the backing + object to be retired (deleted) or retained. + + (*) FSCACHE_OBJECT_EV_WITHDRAW + + This is signalled when the cache backend wants to withdraw an object. + This means that the object will have to be detached from the netfs's + cookie. + +Because the withdrawing releasing/retiring events are all handled by the object +state machine, it doesn't matter if there's a collision with both ends trying +to sever the connection at the same time. The state machine can just pick +which one it wants to honour, and that effects the other. diff --git a/Documentation/filesystems/caching/operations.txt b/Documentation/filesystems/caching/operations.txt new file mode 100644 index 000000000000..b6b070c57cbf --- /dev/null +++ b/Documentation/filesystems/caching/operations.txt @@ -0,0 +1,213 @@ + ================================ + ASYNCHRONOUS OPERATIONS HANDLING + ================================ + +By: David Howells <dhowells@redhat.com> + +Contents: + + (*) Overview. + + (*) Operation record initialisation. + + (*) Parameters. + + (*) Procedure. + + (*) Asynchronous callback. + + +======== +OVERVIEW +======== + +FS-Cache has an asynchronous operations handling facility that it uses for its +data storage and retrieval routines. Its operations are represented by +fscache_operation structs, though these are usually embedded into some other +structure. + +This facility is available to and expected to be be used by the cache backends, +and FS-Cache will create operations and pass them off to the appropriate cache +backend for completion. + +To make use of this facility, <linux/fscache-cache.h> should be #included. + + +=============================== +OPERATION RECORD INITIALISATION +=============================== + +An operation is recorded in an fscache_operation struct: + + struct fscache_operation { + union { + struct work_struct fast_work; + struct slow_work slow_work; + }; + unsigned long flags; + fscache_operation_processor_t processor; + ... + }; + +Someone wanting to issue an operation should allocate something with this +struct embedded in it. They should initialise it by calling: + + void fscache_operation_init(struct fscache_operation *op, + fscache_operation_release_t release); + +with the operation to be initialised and the release function to use. + +The op->flags parameter should be set to indicate the CPU time provision and +the exclusivity (see the Parameters section). + +The op->fast_work, op->slow_work and op->processor flags should be set as +appropriate for the CPU time provision (see the Parameters section). + +FSCACHE_OP_WAITING may be set in op->flags prior to each submission of the +operation and waited for afterwards. + + +========== +PARAMETERS +========== + +There are a number of parameters that can be set in the operation record's flag +parameter. There are three options for the provision of CPU time in these +operations: + + (1) The operation may be done synchronously (FSCACHE_OP_MYTHREAD). A thread + may decide it wants to handle an operation itself without deferring it to + another thread. + + This is, for example, used in read operations for calling readpages() on + the backing filesystem in CacheFiles. Although readpages() does an + asynchronous data fetch, the determination of whether pages exist is done + synchronously - and the netfs does not proceed until this has been + determined. + + If this option is to be used, FSCACHE_OP_WAITING must be set in op->flags + before submitting the operation, and the operating thread must wait for it + to be cleared before proceeding: + + wait_on_bit(&op->flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + + + (2) The operation may be fast asynchronous (FSCACHE_OP_FAST), in which case it + will be given to keventd to process. Such an operation is not permitted + to sleep on I/O. + + This is, for example, used by CacheFiles to copy data from a backing fs + page to a netfs page after the backing fs has read the page in. + + If this option is used, op->fast_work and op->processor must be + initialised before submitting the operation: + + INIT_WORK(&op->fast_work, do_some_work); + + + (3) The operation may be slow asynchronous (FSCACHE_OP_SLOW), in which case it + will be given to the slow work facility to process. Such an operation is + permitted to sleep on I/O. + + This is, for example, used by FS-Cache to handle background writes of + pages that have just been fetched from a remote server. + + If this option is used, op->slow_work and op->processor must be + initialised before submitting the operation: + + fscache_operation_init_slow(op, processor) + + +Furthermore, operations may be one of two types: + + (1) Exclusive (FSCACHE_OP_EXCLUSIVE). Operations of this type may not run in + conjunction with any other operation on the object being operated upon. + + An example of this is the attribute change operation, in which the file + being written to may need truncation. + + (2) Shareable. Operations of this type may be running simultaneously. It's + up to the operation implementation to prevent interference between other + operations running at the same time. + + +========= +PROCEDURE +========= + +Operations are used through the following procedure: + + (1) The submitting thread must allocate the operation and initialise it + itself. Normally this would be part of a more specific structure with the + generic op embedded within. + + (2) The submitting thread must then submit the operation for processing using + one of the following two functions: + + int fscache_submit_op(struct fscache_object *object, + struct fscache_operation *op); + + int fscache_submit_exclusive_op(struct fscache_object *object, + struct fscache_operation *op); + + The first function should be used to submit non-exclusive ops and the + second to submit exclusive ones. The caller must still set the + FSCACHE_OP_EXCLUSIVE flag. + + If successful, both functions will assign the operation to the specified + object and return 0. -ENOBUFS will be returned if the object specified is + permanently unavailable. + + The operation manager will defer operations on an object that is still + undergoing lookup or creation. The operation will also be deferred if an + operation of conflicting exclusivity is in progress on the object. + + If the operation is asynchronous, the manager will retain a reference to + it, so the caller should put their reference to it by passing it to: + + void fscache_put_operation(struct fscache_operation *op); + + (3) If the submitting thread wants to do the work itself, and has marked the + operation with FSCACHE_OP_MYTHREAD, then it should monitor + FSCACHE_OP_WAITING as described above and check the state of the object if + necessary (the object might have died whilst the thread was waiting). + + When it has finished doing its processing, it should call + fscache_put_operation() on it. + + (4) The operation holds an effective lock upon the object, preventing other + exclusive ops conflicting until it is released. The operation can be + enqueued for further immediate asynchronous processing by adjusting the + CPU time provisioning option if necessary, eg: + + op->flags &= ~FSCACHE_OP_TYPE; + op->flags |= ~FSCACHE_OP_FAST; + + and calling: + + void fscache_enqueue_operation(struct fscache_operation *op) + + This can be used to allow other things to have use of the worker thread + pools. + + +===================== +ASYNCHRONOUS CALLBACK +===================== + +When used in asynchronous mode, the worker thread pool will invoke the +processor method with a pointer to the operation. This should then get at the +container struct by using container_of(): + + static void fscache_write_op(struct fscache_operation *_op) + { + struct fscache_storage *op = + container_of(_op, struct fscache_storage, op); + ... + } + +The caller holds a reference on the operation, and will invoke +fscache_put_operation() when the processor function returns. The processor +function is at liberty to call fscache_enqueue_operation() or to take extra +references. diff --git a/Documentation/filesystems/exofs.txt b/Documentation/filesystems/exofs.txt new file mode 100644 index 000000000000..0ced74c2f73c --- /dev/null +++ b/Documentation/filesystems/exofs.txt @@ -0,0 +1,176 @@ +=============================================================================== +WHAT IS EXOFS? +=============================================================================== + +exofs is a file system that uses an OSD and exports the API of a normal Linux +file system. Users access exofs like any other local file system, and exofs +will in turn issue commands to the local OSD initiator. + +OSD is a new T10 command set that views storage devices not as a large/flat +array of sectors but as a container of objects, each having a length, quota, +time attributes and more. Each object is addressed by a 64bit ID, and is +contained in a 64bit ID partition. Each object has associated attributes +attached to it, which are integral part of the object and provide metadata about +the object. The standard defines some common obligatory attributes, but user +attributes can be added as needed. + +=============================================================================== +ENVIRONMENT +=============================================================================== + +To use this file system, you need to have an object store to run it on. You +may download a target from: +http://open-osd.org + +See Documentation/scsi/osd.txt for how to setup a working osd environment. + +=============================================================================== +USAGE +=============================================================================== + +1. Download and compile exofs and open-osd initiator: + You need an external Kernel source tree or kernel headers from your + distribution. (anything based on 2.6.26 or later). + + a. download open-osd including exofs source using: + [parent-directory]$ git clone git://git.open-osd.org/open-osd.git + + b. Build the library module like this: + [parent-directory]$ make -C KSRC=$(KER_DIR) open-osd + + This will build both the open-osd initiator as well as the exofs kernel + module. Use whatever parameters you compiled your Kernel with and + $(KER_DIR) above pointing to the Kernel you compile against. See the file + open-osd/top-level-Makefile for an example. + +2. Get the OSD initiator and target set up properly, and login to the target. + See Documentation/scsi/osd.txt for farther instructions. Also see ./do-osd + for example script that does all these steps. + +3. Insmod the exofs.ko module: + [exofs]$ insmod exofs.ko + +4. Make sure the directory where you want to mount exists. If not, create it. + (For example, mkdir /mnt/exofs) + +5. At first run you will need to invoke the mkfs.exofs application + + As an example, this will create the file system on: + /dev/osd0 partition ID 65536 + + mkfs.exofs --pid=65536 --format /dev/osd0 + + The --format is optional if not specified no OSD_FORMAT will be + preformed and a clean file system will be created in the specified pid, + in the available space of the target. (Use --format=size_in_meg to limit + the total LUN space available) + + If pid already exist it will be deleted and a new one will be created in it's + place. Be careful. + + An exofs lives inside a single OSD partition. You can create multiple exofs + filesystems on the same device using multiple pids. + + (run mkfs.exofs without any parameters for usage help message) + +6. Mount the file system. + + For example, to mount /dev/osd0, partition ID 0x10000 on /mnt/exofs: + + mount -t exofs -o pid=65536 /dev/osd0 /mnt/exofs/ + +7. For reference (See do-exofs example script): + do-exofs start - an example of how to perform the above steps. + do-exofs stop - an example of how to unmount the file system. + do-exofs format - an example of how to format and mkfs a new exofs. + +8. Extra compilation flags (uncomment in fs/exofs/Kbuild): + CONFIG_EXOFS_DEBUG - for debug messages and extra checks. + +=============================================================================== +exofs mount options +=============================================================================== +Similar to any mount command: + mount -t exofs -o exofs_options /dev/osdX mount_exofs_directory + +Where: + -t exofs: specifies the exofs file system + + /dev/osdX: X is a decimal number. /dev/osdX was created after a successful + login into an OSD target. + + mount_exofs_directory: The directory to mount the file system on + + exofs specific options: Options are separated by commas (,) + pid=<integer> - The partition number to mount/create as + container of the filesystem. + This option is mandatory + to=<integer> - Timeout in ticks for a single command + default is (60 * HZ) [for debugging only] + +=============================================================================== +DESIGN +=============================================================================== + +* The file system control block (AKA on-disk superblock) resides in an object + with a special ID (defined in common.h). + Information included in the file system control block is used to fill the + in-memory superblock structure at mount time. This object is created before + the file system is used by mkexofs.c It contains information such as: + - The file system's magic number + - The next inode number to be allocated + +* Each file resides in its own object and contains the data (and it will be + possible to extend the file over multiple objects, though this has not been + implemented yet). + +* A directory is treated as a file, and essentially contains a list of <file + name, inode #> pairs for files that are found in that directory. The object + IDs correspond to the files' inode numbers and will be allocated according to + a bitmap (stored in a separate object). Now they are allocated using a + counter. + +* Each file's control block (AKA on-disk inode) is stored in its object's + attributes. This applies to both regular files and other types (directories, + device files, symlinks, etc.). + +* Credentials are generated per object (inode and superblock) when they is + created in memory (read off disk or created). The credential works for all + operations and is used as long as the object remains in memory. + +* Async OSD operations are used whenever possible, but the target may execute + them out of order. The operations that concern us are create, delete, + readpage, writepage, update_inode, and truncate. The following pairs of + operations should execute in the order written, and we need to prevent them + from executing in reverse order: + - The following are handled with the OBJ_CREATED and OBJ_2BCREATED + flags. OBJ_CREATED is set when we know the object exists on the OSD - + in create's callback function, and when we successfully do a read_inode. + OBJ_2BCREATED is set in the beginning of the create function, so we + know that we should wait. + - create/delete: delete should wait until the object is created + on the OSD. + - create/readpage: readpage should be able to return a page + full of zeroes in this case. If there was a write already + en-route (i.e. create, writepage, readpage) then the page + would be locked, and so it would really be the same as + create/writepage. + - create/writepage: if writepage is called for a sync write, it + should wait until the object is created on the OSD. + Otherwise, it should just return. + - create/truncate: truncate should wait until the object is + created on the OSD. + - create/update_inode: update_inode should wait until the + object is created on the OSD. + - Handled by VFS locks: + - readpage/delete: shouldn't happen because of page lock. + - writepage/delete: shouldn't happen because of page lock. + - readpage/writepage: shouldn't happen because of page lock. + +=============================================================================== +LICENSE/COPYRIGHT +=============================================================================== +The exofs file system is based on ext2 v0.5b (distributed with the Linux kernel +version 2.6.10). All files include the original copyrights, and the license +is GPL version 2 (only version 2, as is true for the Linux kernel). The +Linux kernel can be downloaded from www.kernel.org. diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt index 4333e836c495..e055acb6b2d4 100644 --- a/Documentation/filesystems/ext2.txt +++ b/Documentation/filesystems/ext2.txt @@ -373,10 +373,11 @@ Filesystem Resizing http://ext2resize.sourceforge.net/ Compression (*) http://e2compr.sourceforge.net/ Implementations for: -Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm -Windows 95 (*) http://www.yipton.demon.co.uk/content.html#FSDEXT2 +Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs +Windows 95 (*) http://www.yipton.net/content.html#FSDEXT2 DOS client (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ -OS/2 http://perso.wanadoo.fr/matthieu.willm/ext2-os2/ -RISC OS client ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/ +OS/2 (+) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ +RISC OS client http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/ (*) no longer actively developed/supported (as of Apr 2001) +(+) no longer actively developed/supported (as of Mar 2009) diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index 9dd2a3bb2acc..570f9bd9be2b 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -14,6 +14,11 @@ Options When mounting an ext3 filesystem, the following option are accepted: (*) == default +ro Mount filesystem read only. Note that ext3 will replay + the journal (and thus write to the partition) even when + mounted "read only". Mount options "ro,noload" can be + used to prevent writes to the filesystem. + journal=update Update the ext3 file system's journal to the current format. @@ -27,7 +32,9 @@ journal_dev=devnum When the external journal device's major/minor numbers identified through its new major/minor numbers encoded in devnum. -noload Don't load the journal on mounting. +noload Don't load the journal on mounting. Note that this forces + mount of inconsistent filesystem, which can lead to + various problems. data=journal All data are committed into the journal prior to being written into the main file system. @@ -92,9 +99,12 @@ nocheck debug Extra debugging information is sent to syslog. -errors=remount-ro(*) Remount the filesystem read-only on an error. +errors=remount-ro Remount the filesystem read-only on an error. errors=continue Keep going on a filesystem error. errors=panic Panic and halt the machine if an error occurs. + (These mount options override the errors behavior + specified in the superblock, which can be + configured using tune2fs.) data_err=ignore(*) Just print an error message if an error occurs in a file data buffer in ordered mode. @@ -198,5 +208,5 @@ kernel source: <file:fs/ext3/> programs: http://e2fsprogs.sourceforge.net/ http://ext2resize.sourceforge.net -useful links: http://www-106.ibm.com/developerworks/linux/library/l-fs7/ - http://www-106.ibm.com/developerworks/linux/library/l-fs8/ +useful links: http://www.ibm.com/developerworks/library/l-fs7.html + http://www.ibm.com/developerworks/library/l-fs8.html diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index cec829bc7291..97882df04865 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -85,7 +85,7 @@ Note: More extensive information for getting started with ext4 can be * extent format more robust in face of on-disk corruption due to magics, * internal redundancy in tree * improved file allocation (multi-block alloc) -* fix 32000 subdirectory limit +* lift 32000 subdirectory limit imposed by i_links_count[1] * nsec timestamps for mtime, atime, ctime, create time * inode version field on disk (NFSv4, Lustre) * reduced e2fsck time via uninit_bg feature @@ -100,6 +100,9 @@ Note: More extensive information for getting started with ext4 can be * efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force the ordering) +[1] Filesystems with a block size of 1k may see a limit imposed by the +directory hash tree having a maximum depth of two. + 2.2 Candidate features for future inclusion * Online defrag (patches available but not well tested) @@ -180,8 +183,8 @@ commit=nrsec (*) Ext4 can be told to sync all its data and metadata performance. barrier=<0|1(*)> This enables/disables the use of write barriers in - the jbd code. barrier=0 disables, barrier=1 enables. - This also requires an IO stack which can support +barrier(*) the jbd code. barrier=0 disables, barrier=1 enables. +nobarrier This also requires an IO stack which can support barriers, and if jbd gets an error on a barrier write, it will disable again with a warning. Write barriers enforce proper on-disk ordering @@ -189,6 +192,9 @@ barrier=<0|1(*)> This enables/disables the use of write barriers in safe to use, at some performance penalty. If your disks are battery-backed in one way or another, disabling barriers may safely improve performance. + The mount options "barrier" and "nobarrier" can + also be used to enable or disable barriers, for + consistency with other ext4 mount options. inode_readahead=n This tuning parameter controls the maximum number of inode table blocks that ext4's inode @@ -310,6 +316,24 @@ journal_ioprio=prio The I/O priority (from 0 to 7, where 0 is the a slightly higher priority than the default I/O priority. +auto_da_alloc(*) Many broken applications don't use fsync() when +noauto_da_alloc replacing existing files via patterns such as + fd = open("foo.new")/write(fd,..)/close(fd)/ + rename("foo.new", "foo"), or worse yet, + fd = open("foo", O_TRUNC)/write(fd,..)/close(fd). + If auto_da_alloc is enabled, ext4 will detect + the replace-via-rename and replace-via-truncate + patterns and force that any delayed allocation + blocks are allocated such that at the next + journal commit, in the default data=ordered + mode, the data blocks of the new file are forced + to disk before the rename() operation is + commited. This provides roughly the same level + of guarantees as ext3, and avoids the + "zero-length" problem that can happen when a + system crashes before the delayed allocation + blocks are forced to disk. + Data Mode ========= There are 3 different data modes: diff --git a/Documentation/filesystems/knfsd-stats.txt b/Documentation/filesystems/knfsd-stats.txt new file mode 100644 index 000000000000..64ced5149d37 --- /dev/null +++ b/Documentation/filesystems/knfsd-stats.txt @@ -0,0 +1,159 @@ + +Kernel NFS Server Statistics +============================ + +This document describes the format and semantics of the statistics +which the kernel NFS server makes available to userspace. These +statistics are available in several text form pseudo files, each of +which is described separately below. + +In most cases you don't need to know these formats, as the nfsstat(8) +program from the nfs-utils distribution provides a helpful command-line +interface for extracting and printing them. + +All the files described here are formatted as a sequence of text lines, +separated by newline '\n' characters. Lines beginning with a hash +'#' character are comments intended for humans and should be ignored +by parsing routines. All other lines contain a sequence of fields +separated by whitespace. + +/proc/fs/nfsd/pool_stats +------------------------ + +This file is available in kernels from 2.6.30 onwards, if the +/proc/fs/nfsd filesystem is mounted (it almost always should be). + +The first line is a comment which describes the fields present in +all the other lines. The other lines present the following data as +a sequence of unsigned decimal numeric fields. One line is shown +for each NFS thread pool. + +All counters are 64 bits wide and wrap naturally. There is no way +to zero these counters, instead applications should do their own +rate conversion. + +pool + The id number of the NFS thread pool to which this line applies. + This number does not change. + + Thread pool ids are a contiguous set of small integers starting + at zero. The maximum value depends on the thread pool mode, but + currently cannot be larger than the number of CPUs in the system. + Note that in the default case there will be a single thread pool + which contains all the nfsd threads and all the CPUs in the system, + and thus this file will have a single line with a pool id of "0". + +packets-arrived + Counts how many NFS packets have arrived. More precisely, this + is the number of times that the network stack has notified the + sunrpc server layer that new data may be available on a transport + (e.g. an NFS or UDP socket or an NFS/RDMA endpoint). + + Depending on the NFS workload patterns and various network stack + effects (such as Large Receive Offload) which can combine packets + on the wire, this may be either more or less than the number + of NFS calls received (which statistic is available elsewhere). + However this is a more accurate and less workload-dependent measure + of how much CPU load is being placed on the sunrpc server layer + due to NFS network traffic. + +sockets-enqueued + Counts how many times an NFS transport is enqueued to wait for + an nfsd thread to service it, i.e. no nfsd thread was considered + available. + + The circumstance this statistic tracks indicates that there was NFS + network-facing work to be done but it couldn't be done immediately, + thus introducing a small delay in servicing NFS calls. The ideal + rate of change for this counter is zero; significantly non-zero + values may indicate a performance limitation. + + This can happen either because there are too few nfsd threads in the + thread pool for the NFS workload (the workload is thread-limited), + or because the NFS workload needs more CPU time than is available in + the thread pool (the workload is CPU-limited). In the former case, + configuring more nfsd threads will probably improve the performance + of the NFS workload. In the latter case, the sunrpc server layer is + already choosing not to wake idle nfsd threads because there are too + many nfsd threads which want to run but cannot, so configuring more + nfsd threads will make no difference whatsoever. The overloads-avoided + statistic (see below) can be used to distinguish these cases. + +threads-woken + Counts how many times an idle nfsd thread is woken to try to + receive some data from an NFS transport. + + This statistic tracks the circumstance where incoming + network-facing NFS work is being handled quickly, which is a good + thing. The ideal rate of change for this counter will be close + to but less than the rate of change of the packets-arrived counter. + +overloads-avoided + Counts how many times the sunrpc server layer chose not to wake an + nfsd thread, despite the presence of idle nfsd threads, because + too many nfsd threads had been recently woken but could not get + enough CPU time to actually run. + + This statistic counts a circumstance where the sunrpc layer + heuristically avoids overloading the CPU scheduler with too many + runnable nfsd threads. The ideal rate of change for this counter + is zero. Significant non-zero values indicate that the workload + is CPU limited. Usually this is associated with heavy CPU usage + on all the CPUs in the nfsd thread pool. + + If a sustained large overloads-avoided rate is detected on a pool, + the top(1) utility should be used to check for the following + pattern of CPU usage on all the CPUs associated with the given + nfsd thread pool. + + - %us ~= 0 (as you're *NOT* running applications on your NFS server) + + - %wa ~= 0 + + - %id ~= 0 + + - %sy + %hi + %si ~= 100 + + If this pattern is seen, configuring more nfsd threads will *not* + improve the performance of the workload. If this patten is not + seen, then something more subtle is wrong. + +threads-timedout + Counts how many times an nfsd thread triggered an idle timeout, + i.e. was not woken to handle any incoming network packets for + some time. + + This statistic counts a circumstance where there are more nfsd + threads configured than can be used by the NFS workload. This is + a clue that the number of nfsd threads can be reduced without + affecting performance. Unfortunately, it's only a clue and not + a strong indication, for a couple of reasons: + + - Currently the rate at which the counter is incremented is quite + slow; the idle timeout is 60 minutes. Unless the NFS workload + remains constant for hours at a time, this counter is unlikely + to be providing information that is still useful. + + - It is usually a wise policy to provide some slack, + i.e. configure a few more nfsds than are currently needed, + to allow for future spikes in load. + + +Note that incoming packets on NFS transports will be dealt with in +one of three ways. An nfsd thread can be woken (threads-woken counts +this case), or the transport can be enqueued for later attention +(sockets-enqueued counts this case), or the packet can be temporarily +deferred because the transport is currently being used by an nfsd +thread. This last case is not very interesting and is not explicitly +counted, but can be inferred from the other counters thus: + +packets-deferred = packets-arrived - ( sockets-enqueued + threads-woken ) + + +More +---- +Descriptions of the other statistics file should go here. + + +Greg Banks <gnb@sgi.com> +26 Mar 2009 diff --git a/Documentation/filesystems/nfs41-server.txt b/Documentation/filesystems/nfs41-server.txt new file mode 100644 index 000000000000..05d81cbcb2e1 --- /dev/null +++ b/Documentation/filesystems/nfs41-server.txt @@ -0,0 +1,161 @@ +NFSv4.1 Server Implementation + +Server support for minorversion 1 can be controlled using the +/proc/fs/nfsd/versions control file. The string output returned +by reading this file will contain either "+4.1" or "-4.1" +correspondingly. + +Currently, server support for minorversion 1 is disabled by default. +It can be enabled at run time by writing the string "+4.1" to +the /proc/fs/nfsd/versions control file. Note that to write this +control file, the nfsd service must be taken down. Use your user-mode +nfs-utils to set this up; see rpc.nfsd(8) + +The NFSv4 minorversion 1 (NFSv4.1) implementation in nfsd is based +on the latest NFSv4.1 Internet Draft: +http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-29 + +From the many new features in NFSv4.1 the current implementation +focuses on the mandatory-to-implement NFSv4.1 Sessions, providing +"exactly once" semantics and better control and throttling of the +resources allocated for each client. + +Other NFSv4.1 features, Parallel NFS operations in particular, +are still under development out of tree. +See http://wiki.linux-nfs.org/wiki/index.php/PNFS_prototype_design +for more information. + +The table below, taken from the NFSv4.1 document, lists +the operations that are mandatory to implement (REQ), optional +(OPT), and NFSv4.0 operations that are required not to implement (MNI) +in minor version 1. The first column indicates the operations that +are not supported yet by the linux server implementation. + +The OPTIONAL features identified and their abbreviations are as follows: + pNFS Parallel NFS + FDELG File Delegations + DDELG Directory Delegations + +The following abbreviations indicate the linux server implementation status. + I Implemented NFSv4.1 operations. + NS Not Supported. + NS* unimplemented optional feature. + P pNFS features implemented out of tree. + PNS pNFS features that are not supported yet (out of tree). + +Operations + + +----------------------+------------+--------------+----------------+ + | Operation | REQ, REC, | Feature | Definition | + | | OPT, or | (REQ, REC, | | + | | MNI | or OPT) | | + +----------------------+------------+--------------+----------------+ + | ACCESS | REQ | | Section 18.1 | +NS | BACKCHANNEL_CTL | REQ | | Section 18.33 | +NS | BIND_CONN_TO_SESSION | REQ | | Section 18.34 | + | CLOSE | REQ | | Section 18.2 | + | COMMIT | REQ | | Section 18.3 | + | CREATE | REQ | | Section 18.4 | +I | CREATE_SESSION | REQ | | Section 18.36 | +NS*| DELEGPURGE | OPT | FDELG (REQ) | Section 18.5 | + | DELEGRETURN | OPT | FDELG, | Section 18.6 | + | | | DDELG, pNFS | | + | | | (REQ) | | +NS | DESTROY_CLIENTID | REQ | | Section 18.50 | +I | DESTROY_SESSION | REQ | | Section 18.37 | +I | EXCHANGE_ID | REQ | | Section 18.35 | +NS | FREE_STATEID | REQ | | Section 18.38 | + | GETATTR | REQ | | Section 18.7 | +P | GETDEVICEINFO | OPT | pNFS (REQ) | Section 18.40 | +P | GETDEVICELIST | OPT | pNFS (OPT) | Section 18.41 | + | GETFH | REQ | | Section 18.8 | +NS*| GET_DIR_DELEGATION | OPT | DDELG (REQ) | Section 18.39 | +P | LAYOUTCOMMIT | OPT | pNFS (REQ) | Section 18.42 | +P | LAYOUTGET | OPT | pNFS (REQ) | Section 18.43 | +P | LAYOUTRETURN | OPT | pNFS (REQ) | Section 18.44 | + | LINK | OPT | | Section 18.9 | + | LOCK | REQ | | Section 18.10 | + | LOCKT | REQ | | Section 18.11 | + | LOCKU | REQ | | Section 18.12 | + | LOOKUP | REQ | | Section 18.13 | + | LOOKUPP | REQ | | Section 18.14 | + | NVERIFY | REQ | | Section 18.15 | + | OPEN | REQ | | Section 18.16 | +NS*| OPENATTR | OPT | | Section 18.17 | + | OPEN_CONFIRM | MNI | | N/A | + | OPEN_DOWNGRADE | REQ | | Section 18.18 | + | PUTFH | REQ | | Section 18.19 | + | PUTPUBFH | REQ | | Section 18.20 | + | PUTROOTFH | REQ | | Section 18.21 | + | READ | REQ | | Section 18.22 | + | READDIR | REQ | | Section 18.23 | + | READLINK | OPT | | Section 18.24 | +NS | RECLAIM_COMPLETE | REQ | | Section 18.51 | + | RELEASE_LOCKOWNER | MNI | | N/A | + | REMOVE | REQ | | Section 18.25 | + | RENAME | REQ | | Section 18.26 | + | RENEW | MNI | | N/A | + | RESTOREFH | REQ | | Section 18.27 | + | SAVEFH | REQ | | Section 18.28 | + | SECINFO | REQ | | Section 18.29 | +NS | SECINFO_NO_NAME | REC | pNFS files | Section 18.45, | + | | | layout (REQ) | Section 13.12 | +I | SEQUENCE | REQ | | Section 18.46 | + | SETATTR | REQ | | Section 18.30 | + | SETCLIENTID | MNI | | N/A | + | SETCLIENTID_CONFIRM | MNI | | N/A | +NS | SET_SSV | REQ | | Section 18.47 | +NS | TEST_STATEID | REQ | | Section 18.48 | + | VERIFY | REQ | | Section 18.31 | +NS*| WANT_DELEGATION | OPT | FDELG (OPT) | Section 18.49 | + | WRITE | REQ | | Section 18.32 | + +Callback Operations + + +-------------------------+-----------+-------------+---------------+ + | Operation | REQ, REC, | Feature | Definition | + | | OPT, or | (REQ, REC, | | + | | MNI | or OPT) | | + +-------------------------+-----------+-------------+---------------+ + | CB_GETATTR | OPT | FDELG (REQ) | Section 20.1 | +P | CB_LAYOUTRECALL | OPT | pNFS (REQ) | Section 20.3 | +NS*| CB_NOTIFY | OPT | DDELG (REQ) | Section 20.4 | +P | CB_NOTIFY_DEVICEID | OPT | pNFS (OPT) | Section 20.12 | +NS*| CB_NOTIFY_LOCK | OPT | | Section 20.11 | +NS*| CB_PUSH_DELEG | OPT | FDELG (OPT) | Section 20.5 | + | CB_RECALL | OPT | FDELG, | Section 20.2 | + | | | DDELG, pNFS | | + | | | (REQ) | | +NS*| CB_RECALL_ANY | OPT | FDELG, | Section 20.6 | + | | | DDELG, pNFS | | + | | | (REQ) | | +NS | CB_RECALL_SLOT | REQ | | Section 20.8 | +NS*| CB_RECALLABLE_OBJ_AVAIL | OPT | DDELG, pNFS | Section 20.7 | + | | | (REQ) | | +I | CB_SEQUENCE | OPT | FDELG, | Section 20.9 | + | | | DDELG, pNFS | | + | | | (REQ) | | +NS*| CB_WANTS_CANCELLED | OPT | FDELG, | Section 20.10 | + | | | DDELG, pNFS | | + | | | (REQ) | | + +-------------------------+-----------+-------------+---------------+ + +Implementation notes: + +EXCHANGE_ID: +* only SP4_NONE state protection supported +* implementation ids are ignored + +CREATE_SESSION: +* backchannel attributes are ignored +* backchannel security parameters are ignored + +SEQUENCE: +* no support for dynamic slot table renegotiation (optional) + +nfsv4.1 COMPOUND rules: +The following cases aren't supported yet: +* Enforcing of NFS4ERR_NOT_ONLY_OP for: BIND_CONN_TO_SESSION, CREATE_SESSION, + DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID. +* DESTROY_SESSION MUST be the final operation in the COMPOUND request. + diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt new file mode 100644 index 000000000000..55c4300abfcb --- /dev/null +++ b/Documentation/filesystems/nilfs2.txt @@ -0,0 +1,200 @@ +NILFS2 +------ + +NILFS2 is a log-structured file system (LFS) supporting continuous +snapshotting. In addition to versioning capability of the entire file +system, users can even restore files mistakenly overwritten or +destroyed just a few seconds ago. Since NILFS2 can keep consistency +like conventional LFS, it achieves quick recovery after system +crashes. + +NILFS2 creates a number of checkpoints every few seconds or per +synchronous write basis (unless there is no change). Users can select +significant versions among continuously created checkpoints, and can +change them into snapshots which will be preserved until they are +changed back to checkpoints. + +There is no limit on the number of snapshots until the volume gets +full. Each snapshot is mountable as a read-only file system +concurrently with its writable mount, and this feature is convenient +for online backup. + +The userland tools are included in nilfs-utils package, which is +available from the following download page. At least "mkfs.nilfs2", +"mount.nilfs2", "umount.nilfs2", and "nilfs_cleanerd" (so called +cleaner or garbage collector) are required. Details on the tools are +described in the man pages included in the package. + +Project web page: http://www.nilfs.org/en/ +Download page: http://www.nilfs.org/en/download.html +Git tree web page: http://www.nilfs.org/git/ +NILFS mailing lists: http://www.nilfs.org/mailman/listinfo/users + +Caveats +======= + +Features which NILFS2 does not support yet: + + - atime + - extended attributes + - POSIX ACLs + - quotas + - writable snapshots + - remote backup (CDP) + - data integrity + - defragmentation + +Mount options +============= + +NILFS2 supports the following mount options: +(*) == default + +barrier=on(*) This enables/disables barriers. barrier=off disables + it, barrier=on enables it. +errors=continue(*) Keep going on a filesystem error. +errors=remount-ro Remount the filesystem read-only on an error. +errors=panic Panic and halt the machine if an error occurs. +cp=n Specify the checkpoint-number of the snapshot to be + mounted. Checkpoints and snapshots are listed by lscp + user command. Only the checkpoints marked as snapshot + are mountable with this option. Snapshot is read-only, + so a read-only mount option must be specified together. +order=relaxed(*) Apply relaxed order semantics that allows modified data + blocks to be written to disk without making a + checkpoint if no metadata update is going. This mode + is equivalent to the ordered data mode of the ext3 + filesystem except for the updates on data blocks still + conserve atomicity. This will improve synchronous + write performance for overwriting. +order=strict Apply strict in-order semantics that preserves sequence + of all file operations including overwriting of data + blocks. That means, it is guaranteed that no + overtaking of events occurs in the recovered file + system after a crash. + +NILFS2 usage +============ + +To use nilfs2 as a local file system, simply: + + # mkfs -t nilfs2 /dev/block_device + # mount -t nilfs2 /dev/block_device /dir + +This will also invoke the cleaner through the mount helper program +(mount.nilfs2). + +Checkpoints and snapshots are managed by the following commands. +Their manpages are included in the nilfs-utils package above. + + lscp list checkpoints or snapshots. + mkcp make a checkpoint or a snapshot. + chcp change an existing checkpoint to a snapshot or vice versa. + rmcp invalidate specified checkpoint(s). + +To mount a snapshot, + + # mount -t nilfs2 -r -o cp=<cno> /dev/block_device /snap_dir + +where <cno> is the checkpoint number of the snapshot. + +To unmount the NILFS2 mount point or snapshot, simply: + + # umount /dir + +Then, the cleaner daemon is automatically shut down by the umount +helper program (umount.nilfs2). + +Disk format +=========== + +A nilfs2 volume is equally divided into a number of segments except +for the super block (SB) and segment #0. A segment is the container +of logs. Each log is composed of summary information blocks, payload +blocks, and an optional super root block (SR): + + ______________________________________________________ + | |SB| | Segment | Segment | Segment | ... | Segment | | + |_|__|_|____0____|____1____|____2____|_____|____N____|_| + 0 +1K +4K +8M +16M +24M +(8MB x N) + . . (Typical offsets for 4KB-block) + . . + .______________________. + | log | log |... | log | + |__1__|__2__|____|__m__| + . . + . . + . . + .______________________________. + | Summary | Payload blocks |SR| + |_blocks__|_________________|__| + +The payload blocks are organized per file, and each file consists of +data blocks and B-tree node blocks: + + |<--- File-A --->|<--- File-B --->| + _______________________________________________________________ + | Data blocks | B-tree blocks | Data blocks | B-tree blocks | ... + _|_____________|_______________|_____________|_______________|_ + + +Since only the modified blocks are written in the log, it may have +files without data blocks or B-tree node blocks. + +The organization of the blocks is recorded in the summary information +blocks, which contains a header structure (nilfs_segment_summary), per +file structures (nilfs_finfo), and per block structures (nilfs_binfo): + + _________________________________________________________________________ + | Summary | finfo | binfo | ... | binfo | finfo | binfo | ... | binfo |... + |_blocks__|___A___|_(A,1)_|_____|(A,Na)_|___B___|_(B,1)_|_____|(B,Nb)_|___ + + +The logs include regular files, directory files, symbolic link files +and several meta data files. The mata data files are the files used +to maintain file system meta data. The current version of NILFS2 uses +the following meta data files: + + 1) Inode file (ifile) -- Stores on-disk inodes + 2) Checkpoint file (cpfile) -- Stores checkpoints + 3) Segment usage file (sufile) -- Stores allocation state of segments + 4) Data address translation file -- Maps virtual block numbers to usual + (DAT) block numbers. This file serves to + make on-disk blocks relocatable. + +The following figure shows a typical organization of the logs: + + _________________________________________________________________________ + | Summary | regular file | file | ... | ifile | cpfile | sufile | DAT |SR| + |_blocks__|_or_directory_|_______|_____|_______|________|________|_____|__| + + +To stride over segment boundaries, this sequence of files may be split +into multiple logs. The sequence of logs that should be treated as +logically one log, is delimited with flags marked in the segment +summary. The recovery code of nilfs2 looks this boundary information +to ensure atomicity of updates. + +The super root block is inserted for every checkpoints. It includes +three special inodes, inodes for the DAT, cpfile, and sufile. Inodes +of regular files, directories, symlinks and other special files, are +included in the ifile. The inode of ifile itself is included in the +corresponding checkpoint entry in the cpfile. Thus, the hierarchy +among NILFS2 files can be depicted as follows: + + Super block (SB) + | + v + Super root block (the latest cno=xx) + |-- DAT + |-- sufile + `-- cpfile + |-- ifile (cno=c1) + |-- ifile (cno=c2) ---- file (ino=i1) + : : |-- file (ino=i2) + `-- ifile (cno=xx) |-- file (ino=i3) + : : + `-- file (ino=yy) + ( regular file, directory, or symlink ) + +For detail on the format of each file, please see include/linux/nilfs2_fs.h. diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt new file mode 100644 index 000000000000..dcf833587162 --- /dev/null +++ b/Documentation/filesystems/pohmelfs/design_notes.txt @@ -0,0 +1,71 @@ +POHMELFS: Parallel Optimized Host Message Exchange Layered File System. + + Evgeniy Polyakov <zbr@ioremap.net> + +Homepage: http://www.ioremap.net/projects/pohmelfs + +POHMELFS first began as a network filesystem with coherent local data and +metadata caches but is now evolving into a parallel distributed filesystem. + +Main features of this FS include: + * Locally coherent cache for data and metadata with (potentially) byte-range locks. + Since all Linux filesystems lock the whole inode during writing, algorithm + is very simple and does not use byte-ranges, although they are sent in + locking messages. + * Completely async processing of all events except creation of hard and symbolic + links, and rename events. + Object creation and data reading and writing are processed asynchronously. + * Flexible object architecture optimized for network processing. + Ability to create long paths to objects and remove arbitrarily huge + directories with a single network command. + (like removing the whole kernel tree via a single network command). + * Very high performance. + * Fast and scalable multithreaded userspace server. Being in userspace it works + with any underlying filesystem and still is much faster than async in-kernel NFS one. + * Client is able to switch between different servers (if one goes down, client + automatically reconnects to second and so on). + * Transactions support. Full failover for all operations. + Resending transactions to different servers on timeout or error. + * Read request (data read, directory listing, lookup requests) balancing between multiple servers. + * Write requests are replicated to multiple servers and completed only when all of them are acked. + * Ability to add and/or remove servers from the working set at run-time. + * Strong authentification and possible data encryption in network channel. + * Extended attributes support. + +POHMELFS is based on transactions, which are potentially long-standing objects that live +in the client's memory. Each transaction contains all the information needed to process a given +command (or set of commands, which is frequently used during data writing: single transactions +can contain creation and data writing commands). Transactions are committed by all the servers +to which they are sent and, in case of failures, are eventually resent or dropped with an error. +For example, reading will return an error if no servers are available. + +POHMELFS uses a asynchronous approach to data processing. Courtesy of transactions, it is +possible to detach replies from requests and, if the command requires data to be received, the +caller sleeps waiting for it. Thus, it is possible to issue multiple read commands to different +servers and async threads will pick up replies in parallel, find appropriate transactions in the +system and put the data where it belongs (like the page or inode cache). + +The main feature of POHMELFS is writeback data and the metadata cache. +Only a few non-performance critical operations use the write-through cache and +are synchronous: hard and symbolic link creation, and object rename. Creation, +removal of objects and data writing are asynchronous and are sent to +the server during system writeback. Only one writer at a time is allowed for any +given inode, which is guarded by an appropriate locking protocol. +Because of this feature, POHMELFS is extremely fast at metadata intensive +workloads and can fully utilize the bandwidth to the servers when doing bulk +data transfers. + +POHMELFS clients operate with a working set of servers and are capable of balancing read-only +operations (like lookups or directory listings) between them according to IO priorities. +Administrators can add or remove servers from the set at run-time via special commands (described +in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected +with write permission turned on. IO priority and permissions can be changed in run-time. + +POHMELFS is capable of full data channel encryption and/or strong crypto hashing. +One can select any kernel supported cipher, encryption mode, hash type and operation mode +(hmac or digest). It is also possible to use both or neither (default). Crypto configuration +is checked during mount time and, if the server does not support it, appropriate capabilities +will be disabled or mount will fail (if 'crypto_fail_unsupported' mount option is specified). +Crypto performance heavily depends on the number of crypto threads, which asynchronously perform +crypto operations and send the resulting data to server or submit it up the stack. This number +can be controlled via a mount option. diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt new file mode 100644 index 000000000000..db2e41393626 --- /dev/null +++ b/Documentation/filesystems/pohmelfs/info.txt @@ -0,0 +1,99 @@ +POHMELFS usage information. + +Mount options. +All but index, number of crypto threads and maximum IO size can changed via remount. + +idx=%u + Each mountpoint is associated with a special index via this option. + Administrator can add or remove servers from the given index, so all mounts, + which were attached to it, are updated. + Default it is 0. + +trans_scan_timeout=%u + This timeout, expressed in milliseconds, specifies time to scan transaction + trees looking for stale requests, which have to be resent, or if number of + retries exceed specified limit, dropped with error. + Default is 5 seconds. + +drop_scan_timeout=%u + Internal timeout, expressed in milliseconds, which specifies how frequently + inodes marked to be dropped are freed. It also specifies how frequently + the system checks that servers have to be added or removed from current working set. + Default is 1 second. + +wait_on_page_timeout=%u + Number of milliseconds to wait for reply from remote server for data reading command. + If this timeout is exceeded, reading returns an error. + Default is 5 seconds. + +trans_retries=%u + This is the number of times that a transaction will be resent to a server that did + not answer for the last @trans_scan_timeout milliseconds. + When the number of resends exceeds this limit, the transaction is completed with error. + Default is 5 resends. + +crypto_thread_num=%u + Number of crypto processing threads. Threads are used both for RX and TX traffic. + Default is 2, or no threads if crypto operations are not supported. + +trans_max_pages=%u + Maximum number of pages in a single transaction. This parameter also controls + the number of pages, allocated for crypto processing (each crypto thread has + pool of pages, the number of which is equal to 'trans_max_pages'. + Default is 100 pages. + +crypto_fail_unsupported + If specified, mount will fail if the server does not support requested crypto operations. + By default mount will disable non-matching crypto operations. + +mcache_timeout=%u + Maximum number of milliseconds to wait for the mcache objects to be processed. + Mcache includes locks (given lock should be granted by server), attributes (they should be + fully received in the given timeframe). + Default is 5 seconds. + +Usage examples. + +Add server server1.net:1025 into the working set with index $idx +with appropriate hash algorithm and key file and cipher algorithm, mode and key file: +$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key + +Mount filesystem with given index $idx to /mnt mountpoint. +Client will connect to all servers specified in the working set via previous command: +mount -t pohmel -o idx=$idx q /mnt + +Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw): +$cfg A modify -a server1.net -p 1025 -i $idx -I 1 + +Change IO priority to 123 (node with the highest priority gets read requests). +$cfg A modify -a server1.net -p 1025 -i $idx -P 123 + +One can check currect status of all connections in the mountstats file: +# cat /proc/$PID/mountstats +... +device none mounted on /mnt with fstype pohmel +idx addr(:port) socket_type protocol active priority permissions +0 server1.net:1026 1 6 1 250 1 +0 server2.net:1025 1 6 1 123 3 + +Server installation. + +Creating a server, which listens at port 1025 and 0.0.0.0 address. +Working root directory (note, that server chroots there, so you have to have appropriate permissions) +is set to /mnt, server will negotiate hash/cipher with client, in case client requested it, there +are appropriate key files. +Number of working threads is set to 10. + +# ./fserver -a 0.0.0.0 -p 1025 -r /mnt -w 10 -K hash_key -k cipher_key + + -A 6 - listen on ipv6 address. Default: Disabled. + -r root - path to root directory. Default: /tmp. + -a addr - listen address. Default: 0.0.0.0. + -p port - listen port. Default: 1025. + -w workers - number of workers per connected client. Default: 1. + -K file - hash key size. Default: none. + -k file - cipher key size. Default: none. + -h - this help. + +Number of worker threads specifies how many workers will be created for each client. +Bulk single-client transafers usually are better handled with smaller number (like 1-3). diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt new file mode 100644 index 000000000000..40ea6c295afb --- /dev/null +++ b/Documentation/filesystems/pohmelfs/network_protocol.txt @@ -0,0 +1,227 @@ +POHMELFS network protocol. + +Basic structure used in network communication is following command: + +struct netfs_cmd +{ + __u16 cmd; /* Command number */ + __u16 csize; /* Attached crypto information size */ + __u16 cpad; /* Attached padding size */ + __u16 ext; /* External flags */ + __u32 size; /* Size of the attached data */ + __u32 trans; /* Transaction id */ + __u64 id; /* Object ID to operate on. Used for feedback.*/ + __u64 start; /* Start of the object. */ + __u64 iv; /* IV sequence */ + __u8 data[0]; +}; + +Commands can be embedded into transaction command (which in turn has own command), +so one can extend protocol as needed without breaking backward compatibility as long +as old commands are supported. All string lengths include tail 0 byte. + +All commans are transfered over the network in big-endian. CPU endianess is used at the end peers. + +@cmd - command number, which specifies command to be processed. Following + commands are used currently: + + NETFS_READDIR = 1, /* Read directory for given inode number */ + NETFS_READ_PAGE, /* Read data page from the server */ + NETFS_WRITE_PAGE, /* Write data page to the server */ + NETFS_CREATE, /* Create directory entry */ + NETFS_REMOVE, /* Remove directory entry */ + NETFS_LOOKUP, /* Lookup single object */ + NETFS_LINK, /* Create a link */ + NETFS_TRANS, /* Transaction */ + NETFS_OPEN, /* Open intent */ + NETFS_INODE_INFO, /* Metadata cache coherency synchronization message */ + NETFS_PAGE_CACHE, /* Page cache invalidation message */ + NETFS_READ_PAGES, /* Read multiple contiguous pages in one go */ + NETFS_RENAME, /* Rename object */ + NETFS_CAPABILITIES, /* Capabilities of the client, for example supported crypto */ + NETFS_LOCK, /* Distributed lock message */ + NETFS_XATTR_SET, /* Set extended attribute */ + NETFS_XATTR_GET, /* Get extended attribute */ + +@ext - external flags. Used by different commands to specify some extra arguments + like partial size of the embedded objects or creation flags. + +@size - size of the attached data. For NETFS_READ_PAGE and NETFS_READ_PAGES no data is attached, + but size of the requested data is incorporated here. It does not include size of the command + header (struct netfs_cmd) itself. + +@id - id of the object this command operates on. Each command can use it for own purpose. + +@start - start of the object this command operates on. Each command can use it for own purpose. + +@csize, @cpad - size and padding size of the (attached if needed) crypto information. + +Command specifications. + +@NETFS_READDIR +This command is used to sync content of the remote dir to the client. + +@ext - length of the path to object. +@size - the same. +@id - local inode number of the directory to read. +@start - zero. + + +@NETFS_READ_PAGE +This command is used to read data from remote server. +Data size does not exceed local page cache size. + +@id - inode number. +@start - first byte offset. +@size - number of bytes to read plus length of the path to object. +@ext - object path length. + + +@NETFS_CREATE +Used to create object. +It does not require that all directories on top of the object were +already created, it will create them automatically. Each object has +associated @netfs_path_entry data structure, which contains creation +mode (permissions and type) and length of the name as long as name itself. + +@start - 0 +@size - size of the all data structures needed to create a path +@id - local inode number +@ext - 0 + + +@NETFS_REMOVE +Used to remove object. + +@ext - length of the path to object. +@size - the same. +@id - local inode number. +@start - zero. + + +@NETFS_LOOKUP +Lookup information about object on server. + +@ext - length of the path to object. +@size - the same. +@id - local inode number of the directory to look object in. +@start - local inode number of the object to look at. + + +@NETFS_LINK +Create hard of symlink. +Command is sent as "object_path|target_path". + +@size - size of the above string. +@id - parent local inode number. +@start - 1 for symlink, 0 for hardlink. +@ext - size of the "object_path" above. + + +@NETFS_TRANS +Transaction header. + +@size - incorporates all embedded command sizes including theirs header sizes. +@start - transaction generation number - unique id used to find transaction. +@ext - transaction flags. Unused at the moment. +@id - 0. + + +@NETFS_OPEN +Open intent for given transaction. + +@id - local inode number. +@start - 0. +@size - path length to the object. +@ext - open flags (O_RDWR and so on). + + +@NETFS_INODE_INFO +Metadata update command. +It is sent to servers when attributes of the object are changed and received +when data or metadata were updated. It operates with the following structure: + +struct netfs_inode_info +{ + unsigned int mode; + unsigned int nlink; + unsigned int uid; + unsigned int gid; + unsigned int blocksize; + unsigned int padding; + __u64 ino; + __u64 blocks; + __u64 rdev; + __u64 size; + __u64 version; +}; + +It effectively mirrors stat(2) returned data. + + +@ext - path length to the object. +@size - the same plus size of the netfs_inode_info structure. +@id - local inode number. +@start - 0. + + +@NETFS_PAGE_CACHE +Command is only received by clients. It contains information about +page to be marked as not up-to-date. + +@id - client's inode number. +@start - last byte of the page to be invalidated. If it is not equal to + current inode size, it will be vmtruncated(). +@size - 0 +@ext - 0 + + +@NETFS_READ_PAGES +Used to read multiple contiguous pages in one go. + +@start - first byte of the contiguous region to read. +@size - contains of two fields: lower 8 bits are used to represent page cache shift + used by client, another 3 bytes are used to get number of pages. +@id - local inode number. +@ext - path length to the object. + + +@NETFS_RENAME +Used to rename object. +Attached data is formed into following string: "old_path|new_path". + +@id - local inode number. +@start - parent inode number. +@size - length of the above string. +@ext - length of the old path part. + + +@NETFS_CAPABILITIES +Used to exchange crypto capabilities with server. +If crypto capabilities are not supported by server, then client will disable it +or fail (if 'crypto_fail_unsupported' mount options was specified). + +@id - superblock index. Used to specify crypto information for group of servers. +@size - size of the attached capabilities structure. +@start - 0. +@size - 0. +@scsize - 0. + +@NETFS_LOCK +Used to send lock request/release messages. Although it sends byte range request +and is capable of flushing pages based on that, it is not used, since all Linux +filesystems lock the whole inode. + +@id - lock generation number. +@start - start of the locked range. +@size - size of the locked range. +@ext - lock type: read/write. Not used actually. 15'th bit is used to determine, + if it is lock request (1) or release (0). + +@NETFS_XATTR_SET +@NETFS_XATTR_GET +Used to set/get extended attributes for given inode. +@id - attribute generation number or xattr setting type +@start - size of the attribute (request or attached) +@size - name length, path len and data size for given attribute +@ext - path length for given object diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index a87be42f8211..ce84cfc9eae0 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -5,6 +5,7 @@ Bodo Bauer <bb@ricochet.net> 2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000 +move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009 ------------------------------------------------------------------------------ Version 1.3 Kernel version 2.2.12 Kernel version 2.4.0-test11-pre4 @@ -26,25 +27,17 @@ Table of Contents 1.6 Parallel port info in /proc/parport 1.7 TTY info in /proc/tty 1.8 Miscellaneous kernel statistics in /proc/stat + 1.9 Ext4 file system parameters 2 Modifying System Parameters - 2.1 /proc/sys/fs - File system data - 2.2 /proc/sys/fs/binfmt_misc - Miscellaneous binary formats - 2.3 /proc/sys/kernel - general kernel parameters - 2.4 /proc/sys/vm - The virtual memory subsystem - 2.5 /proc/sys/dev - Device specific parameters - 2.6 /proc/sys/sunrpc - Remote procedure calls - 2.7 /proc/sys/net - Networking stuff - 2.8 /proc/sys/net/ipv4 - IPV4 settings - 2.9 Appletalk - 2.10 IPX - 2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem - 2.12 /proc/<pid>/oom_adj - Adjust the oom-killer score - 2.13 /proc/<pid>/oom_score - Display current oom-killer score - 2.14 /proc/<pid>/io - Display the IO accounting fields - 2.15 /proc/<pid>/coredump_filter - Core dump filtering settings - 2.16 /proc/<pid>/mountinfo - Information about mounts - 2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface + + 3 Per-Process Parameters + 3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score + 3.2 /proc/<pid>/oom_score - Display current oom-killer score + 3.3 /proc/<pid>/io - Display the IO accounting fields + 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings + 3.5 /proc/<pid>/mountinfo - Information about mounts + ------------------------------------------------------------------------------ Preface @@ -940,27 +933,6 @@ Table 1-10: Files in /proc/fs/ext4/<devname> File Content mb_groups details of multiblock allocator buddy cache of free blocks mb_history multiblock allocation history - stats controls whether the multiblock allocator should start - collecting statistics, which are shown during the unmount - group_prealloc the multiblock allocator will round up allocation - requests to a multiple of this tuning parameter if the - stripe size is not set in the ext4 superblock - max_to_scan The maximum number of extents the multiblock allocator - will search to find the best extent - min_to_scan The minimum number of extents the multiblock allocator - will search to find the best extent - order2_req Tuning parameter which controls the minimum size for - requests (as a power of 2) where the buddy cache is - used - stream_req Files which have fewer blocks than this tunable - parameter will have their blocks allocated out of a - block group specific preallocation pool, so that small - files are packed closely together. Each large file - will have its blocks allocated out of its own unique - preallocation pool. -inode_readahead Tuning parameter which controls the maximum number of - inode table blocks that ext4's inode table readahead - algorithm will pre-read into the buffer cache .............................................................................. @@ -1011,1014 +983,24 @@ review the kernel documentation in the directory /usr/src/linux/Documentation. This chapter is heavily based on the documentation included in the pre 2.2 kernels, and became part of it in version 2.2.1 of the Linux kernel. -2.1 /proc/sys/fs - File system data ------------------------------------ - -This subdirectory contains specific file system, file handle, inode, dentry -and quota information. - -Currently, these files are in /proc/sys/fs: - -dentry-state ------------- - -Status of the directory cache. Since directory entries are dynamically -allocated and deallocated, this file indicates the current status. It holds -six values, in which the last two are not used and are always zero. The others -are listed in table 2-1. - - -Table 2-1: Status files of the directory cache -.............................................................................. - File Content - nr_dentry Almost always zero - nr_unused Number of unused cache entries - age_limit - in seconds after the entry may be reclaimed, when memory is short - want_pages internally -.............................................................................. - -dquot-nr and dquot-max ----------------------- - -The file dquot-max shows the maximum number of cached disk quota entries. - -The file dquot-nr shows the number of allocated disk quota entries and the -number of free disk quota entries. - -If the number of available cached disk quotas is very low and you have a large -number of simultaneous system users, you might want to raise the limit. - -file-nr and file-max --------------------- - -The kernel allocates file handles dynamically, but doesn't free them again at -this time. - -The value in file-max denotes the maximum number of file handles that the -Linux kernel will allocate. When you get a lot of error messages about running -out of file handles, you might want to raise this limit. The default value is -10% of RAM in kilobytes. To change it, just write the new number into the -file: - - # cat /proc/sys/fs/file-max - 4096 - # echo 8192 > /proc/sys/fs/file-max - # cat /proc/sys/fs/file-max - 8192 - - -This method of revision is useful for all customizable parameters of the -kernel - simply echo the new value to the corresponding file. - -Historically, the three values in file-nr denoted the number of allocated file -handles, the number of allocated but unused file handles, and the maximum -number of file handles. Linux 2.6 always reports 0 as the number of free file -handles -- this is not an error, it just means that the number of allocated -file handles exactly matches the number of used file handles. - -Attempts to allocate more file descriptors than file-max are reported with -printk, look for "VFS: file-max limit <number> reached". - -inode-state and inode-nr ------------------------- - -The file inode-nr contains the first two items from inode-state, so we'll skip -to that file... - -inode-state contains two actual numbers and five dummy values. The numbers -are nr_inodes and nr_free_inodes (in order of appearance). - -nr_inodes -~~~~~~~~~ - -Denotes the number of inodes the system has allocated. This number will -grow and shrink dynamically. - -nr_open -------- - -Denotes the maximum number of file-handles a process can -allocate. Default value is 1024*1024 (1048576) which should be -enough for most machines. Actual limit depends on RLIMIT_NOFILE -resource limit. - -nr_free_inodes --------------- - -Represents the number of free inodes. Ie. The number of inuse inodes is -(nr_inodes - nr_free_inodes). - -aio-nr and aio-max-nr ---------------------- - -aio-nr is the running total of the number of events specified on the -io_setup system call for all currently active aio contexts. If aio-nr -reaches aio-max-nr then io_setup will fail with EAGAIN. Note that -raising aio-max-nr does not result in the pre-allocation or re-sizing -of any kernel data structures. - -2.2 /proc/sys/fs/binfmt_misc - Miscellaneous binary formats ------------------------------------------------------------ - -Besides these files, there is the subdirectory /proc/sys/fs/binfmt_misc. This -handles the kernel support for miscellaneous binary formats. - -Binfmt_misc provides the ability to register additional binary formats to the -Kernel without compiling an additional module/kernel. Therefore, binfmt_misc -needs to know magic numbers at the beginning or the filename extension of the -binary. - -It works by maintaining a linked list of structs that contain a description of -a binary format, including a magic with size (or the filename extension), -offset and mask, and the interpreter name. On request it invokes the given -interpreter with the original program as argument, as binfmt_java and -binfmt_em86 and binfmt_mz do. Since binfmt_misc does not define any default -binary-formats, you have to register an additional binary-format. - -There are two general files in binfmt_misc and one file per registered format. -The two general files are register and status. - -Registering a new binary format -------------------------------- - -To register a new binary format you have to issue the command - - echo :name:type:offset:magic:mask:interpreter: > /proc/sys/fs/binfmt_misc/register - - - -with appropriate name (the name for the /proc-dir entry), offset (defaults to -0, if omitted), magic, mask (which can be omitted, defaults to all 0xff) and -last but not least, the interpreter that is to be invoked (for example and -testing /bin/echo). Type can be M for usual magic matching or E for filename -extension matching (give extension in place of magic). - -Check or reset the status of the binary format handler ------------------------------------------------------- - -If you do a cat on the file /proc/sys/fs/binfmt_misc/status, you will get the -current status (enabled/disabled) of binfmt_misc. Change the status by echoing -0 (disables) or 1 (enables) or -1 (caution: this clears all previously -registered binary formats) to status. For example echo 0 > status to disable -binfmt_misc (temporarily). - -Status of a single handler --------------------------- - -Each registered handler has an entry in /proc/sys/fs/binfmt_misc. These files -perform the same function as status, but their scope is limited to the actual -binary format. By cating this file, you also receive all related information -about the interpreter/magic of the binfmt. - -Example usage of binfmt_misc (emulate binfmt_java) --------------------------------------------------- - - cd /proc/sys/fs/binfmt_misc - echo ':Java:M::\xca\xfe\xba\xbe::/usr/local/java/bin/javawrapper:' > register - echo ':HTML:E::html::/usr/local/java/bin/appletviewer:' > register - echo ':Applet:M::<!--applet::/usr/local/java/bin/appletviewer:' > register - echo ':DEXE:M::\x0eDEX::/usr/bin/dosexec:' > register - - -These four lines add support for Java executables and Java applets (like -binfmt_java, additionally recognizing the .html extension with no need to put -<!--applet> to every applet file). You have to install the JDK and the -shell-script /usr/local/java/bin/javawrapper too. It works around the -brokenness of the Java filename handling. To add a Java binary, just create a -link to the class-file somewhere in the path. - -2.3 /proc/sys/kernel - general kernel parameters ------------------------------------------------- - -This directory reflects general kernel behaviors. As I've said before, the -contents depend on your configuration. Here you'll find the most important -files, along with descriptions of what they mean and how to use them. - -acct ----- - -The file contains three values; highwater, lowwater, and frequency. - -It exists only when BSD-style process accounting is enabled. These values -control its behavior. If the free space on the file system where the log lives -goes below lowwater percentage, accounting suspends. If it goes above -highwater percentage, accounting resumes. Frequency determines how often you -check the amount of free space (value is in seconds). Default settings are: 4, -2, and 30. That is, suspend accounting if there is less than 2 percent free; -resume it if we have a value of 3 or more percent; consider information about -the amount of free space valid for 30 seconds - -ctrl-alt-del ------------- - -When the value in this file is 0, ctrl-alt-del is trapped and sent to the init -program to handle a graceful restart. However, when the value is greater that -zero, Linux's reaction to this key combination will be an immediate reboot, -without syncing its dirty buffers. - -[NOTE] - When a program (like dosemu) has the keyboard in raw mode, the - ctrl-alt-del is intercepted by the program before it ever reaches the - kernel tty layer, and it is up to the program to decide what to do with - it. - -domainname and hostname ------------------------ - -These files can be controlled to set the NIS domainname and hostname of your -box. For the classic darkstar.frop.org a simple: - - # echo "darkstar" > /proc/sys/kernel/hostname - # echo "frop.org" > /proc/sys/kernel/domainname - - -would suffice to set your hostname and NIS domainname. - -osrelease, ostype and version ------------------------------ - -The names make it pretty obvious what these fields contain: - - > cat /proc/sys/kernel/osrelease - 2.2.12 - - > cat /proc/sys/kernel/ostype - Linux - - > cat /proc/sys/kernel/version - #4 Fri Oct 1 12:41:14 PDT 1999 - - -The files osrelease and ostype should be clear enough. Version needs a little -more clarification. The #4 means that this is the 4th kernel built from this -source base and the date after it indicates the time the kernel was built. The -only way to tune these values is to rebuild the kernel. - -panic ------ - -The value in this file represents the number of seconds the kernel waits -before rebooting on a panic. When you use the software watchdog, the -recommended setting is 60. If set to 0, the auto reboot after a kernel panic -is disabled, which is the default setting. - -printk ------- - -The four values in printk denote -* console_loglevel, -* default_message_loglevel, -* minimum_console_loglevel and -* default_console_loglevel -respectively. - -These values influence printk() behavior when printing or logging error -messages, which come from inside the kernel. See syslog(2) for more -information on the different log levels. - -console_loglevel ----------------- - -Messages with a higher priority than this will be printed to the console. - -default_message_level ---------------------- - -Messages without an explicit priority will be printed with this priority. - -minimum_console_loglevel ------------------------- - -Minimum (highest) value to which the console_loglevel can be set. - -default_console_loglevel ------------------------- - -Default value for console_loglevel. - -sg-big-buff ------------ - -This file shows the size of the generic SCSI (sg) buffer. At this point, you -can't tune it yet, but you can change it at compile time by editing -include/scsi/sg.h and changing the value of SG_BIG_BUFF. - -If you use a scanner with SANE (Scanner Access Now Easy) you might want to set -this to a higher value. Refer to the SANE documentation on this issue. - -modprobe --------- - -The location where the modprobe binary is located. The kernel uses this -program to load modules on demand. - -unknown_nmi_panic ------------------ - -The value in this file affects behavior of handling NMI. When the value is -non-zero, unknown NMI is trapped and then panic occurs. At that time, kernel -debugging information is displayed on console. - -NMI switch that most IA32 servers have fires unknown NMI up, for example. -If a system hangs up, try pressing the NMI switch. - -panic_on_unrecovered_nmi ------------------------- - -The default Linux behaviour on an NMI of either memory or unknown is to continue -operation. For many environments such as scientific computing it is preferable -that the box is taken out and the error dealt with than an uncorrected -parity/ECC error get propogated. - -A small number of systems do generate NMI's for bizarre random reasons such as -power management so the default is off. That sysctl works like the existing -panic controls already in that directory. - -nmi_watchdog ------------- - -Enables/Disables the NMI watchdog on x86 systems. When the value is non-zero -the NMI watchdog is enabled and will continuously test all online cpus to -determine whether or not they are still functioning properly. Currently, -passing "nmi_watchdog=" parameter at boot time is required for this function -to work. - -If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the -NMI watchdog shares registers with oprofile. By disabling the NMI watchdog, -oprofile may have more registers to utilize. - -msgmni ------- - -Maximum number of message queue ids on the system. -This value scales to the amount of lowmem. It is automatically recomputed -upon memory add/remove or ipc namespace creation/removal. -When a value is written into this file, msgmni's value becomes fixed, i.e. it -is not recomputed anymore when one of the above events occurs. -Use auto_msgmni to change this behavior. - -auto_msgmni ------------ - -Enables/Disables automatic recomputing of msgmni upon memory add/remove or -upon ipc namespace creation/removal (see the msgmni description above). -Echoing "1" into this file enables msgmni automatic recomputing. -Echoing "0" turns it off. -auto_msgmni default value is 1. - - -2.4 /proc/sys/vm - The virtual memory subsystem ------------------------------------------------ - -Please see: Documentation/sysctls/vm.txt for a description of these +Please see: Documentation/sysctls/ directory for descriptions of these entries. +------------------------------------------------------------------------------ +Summary +------------------------------------------------------------------------------ +Certain aspects of kernel behavior can be modified at runtime, without the +need to recompile the kernel, or even to reboot the system. The files in the +/proc/sys tree can not only be read, but also modified. You can use the echo +command to write value into these files, thereby changing the default settings +of the kernel. +------------------------------------------------------------------------------ -2.5 /proc/sys/dev - Device specific parameters ----------------------------------------------- - -Currently there is only support for CDROM drives, and for those, there is only -one read-only file containing information about the CD-ROM drives attached to -the system: - - >cat /proc/sys/dev/cdrom/info - CD-ROM information, Id: cdrom.c 2.55 1999/04/25 - - drive name: sr0 hdb - drive speed: 32 40 - drive # of slots: 1 0 - Can close tray: 1 1 - Can open tray: 1 1 - Can lock tray: 1 1 - Can change speed: 1 1 - Can select disk: 0 1 - Can read multisession: 1 1 - Can read MCN: 1 1 - Reports media changed: 1 1 - Can play audio: 1 1 - - -You see two drives, sr0 and hdb, along with a list of their features. - -2.6 /proc/sys/sunrpc - Remote procedure calls ---------------------------------------------- - -This directory contains four files, which enable or disable debugging for the -RPC functions NFS, NFS-daemon, RPC and NLM. The default values are 0. They can -be set to one to turn debugging on. (The default value is 0 for each) - -2.7 /proc/sys/net - Networking stuff ------------------------------------- - -The interface to the networking parts of the kernel is located in -/proc/sys/net. Table 2-3 shows all possible subdirectories. You may see only -some of them, depending on your kernel's configuration. - - -Table 2-3: Subdirectories in /proc/sys/net -.............................................................................. - Directory Content Directory Content - core General parameter appletalk Appletalk protocol - unix Unix domain sockets netrom NET/ROM - 802 E802 protocol ax25 AX25 - ethernet Ethernet protocol rose X.25 PLP layer - ipv4 IP version 4 x25 X.25 protocol - ipx IPX token-ring IBM token ring - bridge Bridging decnet DEC net - ipv6 IP version 6 -.............................................................................. - -We will concentrate on IP networking here. Since AX15, X.25, and DEC Net are -only minor players in the Linux world, we'll skip them in this chapter. You'll -find some short info on Appletalk and IPX further on in this chapter. Review -the online documentation and the kernel source to get a detailed view of the -parameters for those protocols. In this section we'll discuss the -subdirectories printed in bold letters in the table above. As default values -are suitable for most needs, there is no need to change these values. - -/proc/sys/net/core - Network core options ------------------------------------------ - -rmem_default ------------- - -The default setting of the socket receive buffer in bytes. - -rmem_max --------- - -The maximum receive socket buffer size in bytes. - -wmem_default ------------- - -The default setting (in bytes) of the socket send buffer. - -wmem_max --------- - -The maximum send socket buffer size in bytes. - -message_burst and message_cost ------------------------------- - -These parameters are used to limit the warning messages written to the kernel -log from the networking code. They enforce a rate limit to make a -denial-of-service attack impossible. A higher message_cost factor, results in -fewer messages that will be written. Message_burst controls when messages will -be dropped. The default settings limit warning messages to one every five -seconds. - -warnings --------- - -This controls console messages from the networking stack that can occur because -of problems on the network like duplicate address or bad checksums. Normally, -this should be enabled, but if the problem persists the messages can be -disabled. - - -netdev_max_backlog ------------------- - -Maximum number of packets, queued on the INPUT side, when the interface -receives packets faster than kernel can process them. - -optmem_max ----------- - -Maximum ancillary buffer size allowed per socket. Ancillary data is a sequence -of struct cmsghdr structures with appended data. - -/proc/sys/net/unix - Parameters for Unix domain sockets -------------------------------------------------------- - -There are only two files in this subdirectory. They control the delays for -deleting and destroying socket descriptors. - -2.8 /proc/sys/net/ipv4 - IPV4 settings --------------------------------------- - -IP version 4 is still the most used protocol in Unix networking. It will be -replaced by IP version 6 in the next couple of years, but for the moment it's -the de facto standard for the internet and is used in most networking -environments around the world. Because of the importance of this protocol, -we'll have a deeper look into the subtree controlling the behavior of the IPv4 -subsystem of the Linux kernel. - -Let's start with the entries in /proc/sys/net/ipv4. - -ICMP settings -------------- - -icmp_echo_ignore_all and icmp_echo_ignore_broadcasts ----------------------------------------------------- - -Turn on (1) or off (0), if the kernel should ignore all ICMP ECHO requests, or -just those to broadcast and multicast addresses. - -Please note that if you accept ICMP echo requests with a broadcast/multi\-cast -destination address your network may be used as an exploder for denial of -service packet flooding attacks to other hosts. - -icmp_destunreach_rate, icmp_echoreply_rate, icmp_paramprob_rate and icmp_timeexeed_rate ---------------------------------------------------------------------------------------- - -Sets limits for sending ICMP packets to specific targets. A value of zero -disables all limiting. Any positive value sets the maximum package rate in -hundredth of a second (on Intel systems). - -IP settings ------------ - -ip_autoconfig -------------- - -This file contains the number one if the host received its IP configuration by -RARP, BOOTP, DHCP or a similar mechanism. Otherwise it is zero. - -ip_default_ttl --------------- - -TTL (Time To Live) for IPv4 interfaces. This is simply the maximum number of -hops a packet may travel. - -ip_dynaddr ----------- - -Enable dynamic socket address rewriting on interface address change. This is -useful for dialup interface with changing IP addresses. - -ip_forward ----------- - -Enable or disable forwarding of IP packages between interfaces. Changing this -value resets all other parameters to their default values. They differ if the -kernel is configured as host or router. - -ip_local_port_range -------------------- - -Range of ports used by TCP and UDP to choose the local port. Contains two -numbers, the first number is the lowest port, the second number the highest -local port. Default is 1024-4999. Should be changed to 32768-61000 for -high-usage systems. - -ip_no_pmtu_disc ---------------- - -Global switch to turn path MTU discovery off. It can also be set on a per -socket basis by the applications or on a per route basis. - -ip_masq_debug -------------- - -Enable/disable debugging of IP masquerading. - -IP fragmentation settings -------------------------- - -ipfrag_high_trash and ipfrag_low_trash --------------------------------------- - -Maximum memory used to reassemble IP fragments. When ipfrag_high_thresh bytes -of memory is allocated for this purpose, the fragment handler will toss -packets until ipfrag_low_thresh is reached. - -ipfrag_time ------------ - -Time in seconds to keep an IP fragment in memory. - -TCP settings ------------- - -tcp_ecn -------- - -This file controls the use of the ECN bit in the IPv4 headers. This is a new -feature about Explicit Congestion Notification, but some routers and firewalls -block traffic that has this bit set, so it could be necessary to echo 0 to -/proc/sys/net/ipv4/tcp_ecn if you want to talk to these sites. For more info -you could read RFC2481. - -tcp_retrans_collapse --------------------- - -Bug-to-bug compatibility with some broken printers. On retransmit, try to send -larger packets to work around bugs in certain TCP stacks. Can be turned off by -setting it to zero. - -tcp_keepalive_probes --------------------- - -Number of keep alive probes TCP sends out, until it decides that the -connection is broken. - -tcp_keepalive_time ------------------- - -How often TCP sends out keep alive messages, when keep alive is enabled. The -default is 2 hours. - -tcp_syn_retries ---------------- - -Number of times initial SYNs for a TCP connection attempt will be -retransmitted. Should not be higher than 255. This is only the timeout for -outgoing connections, for incoming connections the number of retransmits is -defined by tcp_retries1. - -tcp_sack --------- - -Enable select acknowledgments after RFC2018. - -tcp_timestamps --------------- - -Enable timestamps as defined in RFC1323. - -tcp_stdurg ----------- - -Enable the strict RFC793 interpretation of the TCP urgent pointer field. The -default is to use the BSD compatible interpretation of the urgent pointer -pointing to the first byte after the urgent data. The RFC793 interpretation is -to have it point to the last byte of urgent data. Enabling this option may -lead to interoperability problems. Disabled by default. - -tcp_syncookies --------------- - -Only valid when the kernel was compiled with CONFIG_SYNCOOKIES. Send out -syncookies when the syn backlog queue of a socket overflows. This is to ward -off the common 'syn flood attack'. Disabled by default. - -Note that the concept of a socket backlog is abandoned. This means the peer -may not receive reliable error messages from an over loaded server with -syncookies enabled. - -tcp_window_scaling ------------------- - -Enable window scaling as defined in RFC1323. - -tcp_fin_timeout ---------------- - -The length of time in seconds it takes to receive a final FIN before the -socket is always closed. This is strictly a violation of the TCP -specification, but required to prevent denial-of-service attacks. - -tcp_max_ka_probes ------------------ - -Indicates how many keep alive probes are sent per slow timer run. Should not -be set too high to prevent bursts. - -tcp_max_syn_backlog -------------------- - -Length of the per socket backlog queue. Since Linux 2.2 the backlog specified -in listen(2) only specifies the length of the backlog queue of already -established sockets. When more connection requests arrive Linux starts to drop -packets. When syncookies are enabled the packets are still answered and the -maximum queue is effectively ignored. - -tcp_retries1 ------------- - -Defines how often an answer to a TCP connection request is retransmitted -before giving up. - -tcp_retries2 ------------- - -Defines how often a TCP packet is retransmitted before giving up. - -Interface specific settings ---------------------------- - -In the directory /proc/sys/net/ipv4/conf you'll find one subdirectory for each -interface the system knows about and one directory calls all. Changes in the -all subdirectory affect all interfaces, whereas changes in the other -subdirectories affect only one interface. All directories have the same -entries: - -accept_redirects ----------------- - -This switch decides if the kernel accepts ICMP redirect messages or not. The -default is 'yes' if the kernel is configured for a regular host and 'no' for a -router configuration. - -accept_source_route -------------------- - -Should source routed packages be accepted or declined. The default is -dependent on the kernel configuration. It's 'yes' for routers and 'no' for -hosts. - -bootp_relay -~~~~~~~~~~~ - -Accept packets with source address 0.b.c.d with destinations not to this host -as local ones. It is supposed that a BOOTP relay daemon will catch and forward -such packets. - -The default is 0, since this feature is not implemented yet (kernel version -2.2.12). - -forwarding ----------- - -Enable or disable IP forwarding on this interface. - -log_martians ------------- - -Log packets with source addresses with no known route to kernel log. - -mc_forwarding -------------- - -Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE and a -multicast routing daemon is required. - -proxy_arp ---------- - -Does (1) or does not (0) perform proxy ARP. - -rp_filter ---------- - -Integer value determines if a source validation should be made. 1 means yes, 0 -means no. Disabled by default, but local/broadcast address spoofing is always -on. - -If you set this to 1 on a router that is the only connection for a network to -the net, it will prevent spoofing attacks against your internal networks -(external addresses can still be spoofed), without the need for additional -firewall rules. - -secure_redirects ----------------- - -Accept ICMP redirect messages only for gateways, listed in default gateway -list. Enabled by default. - -shared_media ------------- - -If it is not set the kernel does not assume that different subnets on this -device can communicate directly. Default setting is 'yes'. - -send_redirects --------------- - -Determines whether to send ICMP redirects to other hosts. - -Routing settings ----------------- - -The directory /proc/sys/net/ipv4/route contains several file to control -routing issues. - -error_burst and error_cost --------------------------- - -These parameters are used to limit how many ICMP destination unreachable to -send from the host in question. ICMP destination unreachable messages are -sent when we cannot reach the next hop while trying to transmit a packet. -It will also print some error messages to kernel logs if someone is ignoring -our ICMP redirects. The higher the error_cost factor is, the fewer -destination unreachable and error messages will be let through. Error_burst -controls when destination unreachable messages and error messages will be -dropped. The default settings limit warning messages to five every second. - -flush ------ - -Writing to this file results in a flush of the routing cache. - -gc_elasticity, gc_interval, gc_min_interval_ms, gc_timeout, gc_thresh ---------------------------------------------------------------------- - -Values to control the frequency and behavior of the garbage collection -algorithm for the routing cache. gc_min_interval is deprecated and replaced -by gc_min_interval_ms. - - -max_size --------- - -Maximum size of the routing cache. Old entries will be purged once the cache -reached has this size. - -redirect_load, redirect_number ------------------------------- - -Factors which determine if more ICPM redirects should be sent to a specific -host. No redirects will be sent once the load limit or the maximum number of -redirects has been reached. - -redirect_silence ----------------- - -Timeout for redirects. After this period redirects will be sent again, even if -this has been stopped, because the load or number limit has been reached. - -Network Neighbor handling -------------------------- - -Settings about how to handle connections with direct neighbors (nodes attached -to the same link) can be found in the directory /proc/sys/net/ipv4/neigh. - -As we saw it in the conf directory, there is a default subdirectory which -holds the default values, and one directory for each interface. The contents -of the directories are identical, with the single exception that the default -settings contain additional options to set garbage collection parameters. - -In the interface directories you'll find the following entries: - -base_reachable_time, base_reachable_time_ms -------------------------------------------- - -A base value used for computing the random reachable time value as specified -in RFC2461. - -Expression of base_reachable_time, which is deprecated, is in seconds. -Expression of base_reachable_time_ms is in milliseconds. - -retrans_time, retrans_time_ms ------------------------------ - -The time between retransmitted Neighbor Solicitation messages. -Used for address resolution and to determine if a neighbor is -unreachable. - -Expression of retrans_time, which is deprecated, is in 1/100 seconds (for -IPv4) or in jiffies (for IPv6). -Expression of retrans_time_ms is in milliseconds. - -unres_qlen ----------- - -Maximum queue length for a pending arp request - the number of packets which -are accepted from other layers while the ARP address is still resolved. - -anycast_delay -------------- - -Maximum for random delay of answers to neighbor solicitation messages in -jiffies (1/100 sec). Not yet implemented (Linux does not have anycast support -yet). - -ucast_solicit -------------- - -Maximum number of retries for unicast solicitation. - -mcast_solicit -------------- - -Maximum number of retries for multicast solicitation. - -delay_first_probe_time ----------------------- - -Delay for the first time probe if the neighbor is reachable. (see -gc_stale_time) - -locktime --------- - -An ARP/neighbor entry is only replaced with a new one if the old is at least -locktime old. This prevents ARP cache thrashing. - -proxy_delay ------------ - -Maximum time (real time is random [0..proxytime]) before answering to an ARP -request for which we have an proxy ARP entry. In some cases, this is used to -prevent network flooding. - -proxy_qlen ----------- - -Maximum queue length of the delayed proxy arp timer. (see proxy_delay). - -app_solicit ----------- - -Determines the number of requests to send to the user level ARP daemon. Use 0 -to turn off. - -gc_stale_time -------------- - -Determines how often to check for stale ARP entries. After an ARP entry is -stale it will be resolved again (which is useful when an IP address migrates -to another machine). When ucast_solicit is greater than 0 it first tries to -send an ARP packet directly to the known host When that fails and -mcast_solicit is greater than 0, an ARP request is broadcasted. - -2.9 Appletalk -------------- - -The /proc/sys/net/appletalk directory holds the Appletalk configuration data -when Appletalk is loaded. The configurable parameters are: - -aarp-expiry-time ----------------- - -The amount of time we keep an ARP entry before expiring it. Used to age out -old hosts. - -aarp-resolve-time ------------------ - -The amount of time we will spend trying to resolve an Appletalk address. - -aarp-retransmit-limit ---------------------- - -The number of times we will retransmit a query before giving up. - -aarp-tick-time --------------- - -Controls the rate at which expires are checked. - -The directory /proc/net/appletalk holds the list of active Appletalk sockets -on a machine. - -The fields indicate the DDP type, the local address (in network:node format) -the remote address, the size of the transmit pending queue, the size of the -received queue (bytes waiting for applications to read) the state and the uid -owning the socket. - -/proc/net/atalk_iface lists all the interfaces configured for appletalk.It -shows the name of the interface, its Appletalk address, the network range on -that address (or network number for phase 1 networks), and the status of the -interface. - -/proc/net/atalk_route lists each known network route. It lists the target -(network) that the route leads to, the router (may be directly connected), the -route flags, and the device the route is using. - -2.10 IPX --------- - -The IPX protocol has no tunable values in proc/sys/net. - -The IPX protocol does, however, provide proc/net/ipx. This lists each IPX -socket giving the local and remote addresses in Novell format (that is -network:node:port). In accordance with the strange Novell tradition, -everything but the port is in hex. Not_Connected is displayed for sockets that -are not tied to a specific remote address. The Tx and Rx queue sizes indicate -the number of bytes pending for transmission and reception. The state -indicates the state the socket is in and the uid is the owning uid of the -socket. - -The /proc/net/ipx_interface file lists all IPX interfaces. For each interface -it gives the network number, the node number, and indicates if the network is -the primary network. It also indicates which device it is bound to (or -Internal for internal networks) and the Frame Type if appropriate. Linux -supports 802.3, 802.2, 802.2 SNAP and DIX (Blue Book) ethernet framing for -IPX. - -The /proc/net/ipx_route table holds a list of IPX routes. For each route it -gives the destination network, the router node (or Directly) and the network -address of the router (or Connected) for internal networks. - -2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem ----------------------------------------------------------- - -The "mqueue" filesystem provides the necessary kernel features to enable the -creation of a user space library that implements the POSIX message queues -API (as noted by the MSG tag in the POSIX 1003.1-2001 version of the System -Interfaces specification.) - -The "mqueue" filesystem contains values for determining/setting the amount of -resources used by the file system. - -/proc/sys/fs/mqueue/queues_max is a read/write file for setting/getting the -maximum number of message queues allowed on the system. - -/proc/sys/fs/mqueue/msg_max is a read/write file for setting/getting the -maximum number of messages in a queue value. In fact it is the limiting value -for another (user) limit which is set in mq_open invocation. This attribute of -a queue must be less or equal then msg_max. - -/proc/sys/fs/mqueue/msgsize_max is a read/write file for setting/getting the -maximum message size value (it is every message queue's attribute set during -its creation). +------------------------------------------------------------------------------ +CHAPTER 3: PER-PROCESS PARAMETERS +------------------------------------------------------------------------------ -2.12 /proc/<pid>/oom_adj - Adjust the oom-killer score +3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score ------------------------------------------------------ This file can be used to adjust the score used to select which processes @@ -2055,25 +1037,15 @@ The task with the highest badness score is then selected and its children are killed, process itself will be killed in an OOM situation when it does not have children or some of them disabled oom like described above. -2.13 /proc/<pid>/oom_score - Display current oom-killer score +3.2 /proc/<pid>/oom_score - Display current oom-killer score ------------------------------------------------------------- ------------------------------------------------------------------------------- This file can be used to check the current score used by the oom-killer is for any given <pid>. Use it together with /proc/<pid>/oom_adj to tune which process should be killed in an out-of-memory situation. ------------------------------------------------------------------------------- -Summary ------------------------------------------------------------------------------- -Certain aspects of kernel behavior can be modified at runtime, without the -need to recompile the kernel, or even to reboot the system. The files in the -/proc/sys tree can not only be read, but also modified. You can use the echo -command to write value into these files, thereby changing the default settings -of the kernel. ------------------------------------------------------------------------------- -2.14 /proc/<pid>/io - Display the IO accounting fields +3.3 /proc/<pid>/io - Display the IO accounting fields ------------------------------------------------------- This file contains IO statistics for each running process @@ -2175,7 +1147,7 @@ those 64-bit counters, process A could see an intermediate result. More information about this can be found within the taskstats documentation in Documentation/accounting. -2.15 /proc/<pid>/coredump_filter - Core dump filtering settings +3.4 /proc/<pid>/coredump_filter - Core dump filtering settings --------------------------------------------------------------- When a process is dumped, all anonymous memory is written to a core file as long as the size of the core file isn't limited. But sometimes we don't want @@ -2219,7 +1191,7 @@ For example: $ echo 0x7 > /proc/self/coredump_filter $ ./some_program -2.16 /proc/<pid>/mountinfo - Information about mounts +3.5 /proc/<pid>/mountinfo - Information about mounts -------------------------------------------------------- This file contains lines of the form: @@ -2256,30 +1228,3 @@ For more information on mount propagation see: Documentation/filesystems/sharedsubtree.txt -2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface --------------------------------------------------------- - -This directory contains configuration options for the epoll(7) interface. - -max_user_instances ------------------- - -This is the maximum number of epoll file descriptors that a single user can -have open at a given time. The default value is 128, and should be enough -for normal users. - -max_user_watches ----------------- - -Every epoll file descriptor can store a number of files to be monitored -for event readiness. Each one of these monitored files constitutes a "watch". -This configuration option sets the maximum number of "watches" that are -allowed for each user. -Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes -on a 64bit one. -The current default value for max_user_watches is the 1/32 of the available -low memory, divided for the "watch" cost in bytes. - - ------------------------------------------------------------------------------- - diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt index 3e79e4a7a392..b324c033035a 100644 --- a/Documentation/filesystems/squashfs.txt +++ b/Documentation/filesystems/squashfs.txt @@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs: Squashfs Cramfs -Max filesystem size: 2^64 16 MiB +Max filesystem size: 2^64 256 MiB Max file size: ~ 2 TiB 16 MiB Max files: unlimited unlimited Max directories: unlimited unlimited diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt index 9f8740ca3f3b..26e4b8bc53ee 100644 --- a/Documentation/filesystems/sysfs-pci.txt +++ b/Documentation/filesystems/sysfs-pci.txt @@ -12,6 +12,7 @@ that support it. For example, a given bus might look like this: | |-- enable | |-- irq | |-- local_cpus + | |-- remove | |-- resource | |-- resource0 | |-- resource1 @@ -36,6 +37,7 @@ files, each with their own function. enable Whether the device is enabled (ascii, rw) irq IRQ number (ascii, ro) local_cpus nearby CPU mask (cpumask, ro) + remove remove device from kernel's list (ascii, wo) resource PCI resource host addresses (ascii, ro) resource0..N PCI resource N, if present (binary, mmap) resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap) @@ -46,6 +48,7 @@ files, each with their own function. ro - read only file rw - file is readable and writable + wo - write only file mmap - file is mmapable ascii - file contains ascii text binary - file contains binary data @@ -73,6 +76,13 @@ that the device must be enabled for a rom read to return data succesfully. In the event a driver is not bound to the device, it can be enabled using the 'enable' file, documented above. +The 'remove' file is used to remove the PCI device, by writing a non-zero +integer to the file. This does not involve any kind of hot-plug functionality, +e.g. powering off the device. The device is removed from the kernel's list of +PCI devices, the sysfs directory for it is removed, and the device will be +removed from any drivers attached to it. Removal of PCI root buses is +disallowed. + Accessing legacy resources through sysfs ---------------------------------------- diff --git a/Documentation/filesystems/udf.txt b/Documentation/filesystems/udf.txt index fde829a756e6..902b95d0ee51 100644 --- a/Documentation/filesystems/udf.txt +++ b/Documentation/filesystems/udf.txt @@ -24,6 +24,8 @@ The following mount options are supported: gid= Set the default group. umask= Set the default umask. + mode= Set the default file permissions. + dmode= Set the default directory permissions. uid= Set the default user. bs= Set the block size. unhide Show otherwise hidden files. diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index deeeed0faa8f..f49eecf2e573 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -277,8 +277,7 @@ or bottom half). unfreeze_fs: called when VFS is unlocking a filesystem and making it writable again. - statfs: called when the VFS needs to get filesystem statistics. This - is called with the kernel lock held + statfs: called when the VFS needs to get filesystem statistics. remount_fs: called when the filesystem is remounted. This is called with the kernel lock held |
