1 files changed, 0 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
deleted file mode 100644
index 59a40f18d551..000000000000
--- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Freescale MXS Application UART (AUART)
-
-Required properties:
-- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
-  imx23 and imx28.
-- reg : Address and length of the register set for the device
-- interrupts : Should contain the auart interrupt numbers
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
-  and AUART DMA channel ID.
-  Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: "rx" for RX channel, "tx" for TX channel.
-
-Optional properties:
-- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines,
-	it also means you enable the DMA support for this UART.
-
-Example:
-auart0: serial@8006a000 {
-	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-	reg = <0x8006a000 0x2000>;
-	interrupts = <112>;
-	dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-	dma-names = "rx", "tx";
-};
-
-Note: Each auart port should have an alias correctly numbered in "aliases"
-node.
-
-Example:
-
-aliases {
-	serial0 = &auart0;
-	serial1 = &auart1;
-	serial2 = &auart2;
-	serial3 = &auart3;
-	serial4 = &auart4;
-};