diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma')
4 files changed, 100 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt index 040f365954cc..e7780a186a36 100644 --- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt @@ -1,7 +1,13 @@ * Renesas USB DMA Controller Device Tree bindings Required Properties: -- compatible: must contain "renesas,usb-dmac" +-compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback. + Examples with soctypes are: + - "renesas,r8a7790-usb-dmac" (R-Car H2) + - "renesas,r8a7791-usb-dmac" (R-Car M2-W) + - "renesas,r8a7793-usb-dmac" (R-Car M2-N) + - "renesas,r8a7794-usb-dmac" (R-Car E2) + - "renesas,r8a7795-usb-dmac" (R-Car H3) - reg: base address and length of the registers block for the DMAC - interrupts: interrupt specifiers for the DMAC, one for each entry in interrupt-names. @@ -15,7 +21,7 @@ Required Properties: Example: R8A7790 (R-Car H2) USB-DMACs usb_dmac0: dma-controller@e65a0000 { - compatible = "renesas,usb-dmac"; + compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH 0 109 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt new file mode 100644 index 000000000000..70cd13f1588a --- /dev/null +++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt @@ -0,0 +1,82 @@ +* STMicroelectronics STM32 DMA controller + +The STM32 DMA is a general-purpose direct memory access controller capable of +supporting 8 independent DMA channels. Each channel can have up to 8 requests. + +Required properties: +- compatible: Should be "st,stm32-dma" +- reg: Should contain DMA registers location and length. This should include + all of the per-channel registers. +- interrupts: Should contain all of the per-channel DMA interrupts in + ascending order with respect to the DMA channel index. +- clocks: Should contain the input clock of the DMA instance. +- #dma-cells : Must be <4>. See DMA client paragraph for more details. + +Optional properties: +- resets: Reference to a reset controller asserting the DMA controller +- st,mem2mem: boolean; if defined, it indicates that the controller supports + memory-to-memory transfer + +Example: + + dma2: dma-controller@40026400 { + compatible = "st,stm32-dma"; + reg = <0x40026400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&clk_hclk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + }; + +* DMA client + +DMA clients connected to the STM32 DMA controller must use the format +described in the dma.txt file, using a five-cell specifier for each +channel: a phandle plus four integer cells. +The four cells in order are: + +1. The channel id +2. The request line number +3. A 32bit mask specifying the DMA channel configuration which are device + dependent: + -bit 9: Peripheral Increment Address + 0x0: no address increment between transfers + 0x1: increment address between transfers + -bit 10: Memory Increment Address + 0x0: no address increment between transfers + 0x1: increment address between transfers + -bit 15: Peripheral Increment Offset Size + 0x0: offset size is linked to the peripheral bus width + 0x1: offset size is fixed to 4 (32-bit alignment) + -bit 16-17: Priority level + 0x0: low + 0x1: medium + 0x2: high + 0x3: very high +5. A 32bit mask specifying the DMA FIFO threshold configuration which are device + dependent: + -bit 0-1: Fifo threshold + 0x0: 1/4 full FIFO + 0x1: 1/2 full FIFO + 0x2: 3/4 full FIFO + 0x3: full FIFO + +Example: + + usart1: serial@40011000 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&clk_pclk2>; + dmas = <&dma2 2 4 0x10400 0x3>, + <&dma2 7 5 0x10200 0x3>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt index b152a75dceae..aead5869a28d 100644 --- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt +++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt @@ -14,6 +14,10 @@ The DMA controller node need to have the following poroperties: Optional properties: - ti,dma-safe-map: Safe routing value for unused request lines +- ti,reserved-dma-request-ranges: DMA request ranges which should not be used + when mapping xbar input to DMA request, they are either + allocated to be used by for example the DSP or they are used as + memcpy channels in eDMA. Notes: When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request @@ -46,6 +50,8 @@ sdma_xbar: dma-router@4a002b78 { #dma-cells = <1>; dma-requests = <205>; ti,dma-safe-map = <0>; + /* Protect the sDMA request ranges: 10-14 and 100-126 */ + ti,reserved-dma-request-ranges = <10 5>, <100 27>; dma-masters = <&sdma>; }; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index d3d0a4fb1c73..079b42a81d7c 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -22,8 +22,7 @@ Required properties: Optional properties: - ti,hwmods: Name of the hwmods associated to the eDMA CC - ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow - these channels will be SW triggered channels. The list must - contain 16 bits numbers, see example. + these channels will be SW triggered channels. See example. - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by the driver, they are allocated to be used by for example the DSP. See example. @@ -56,10 +55,9 @@ edma: edma@49000000 { ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>; /* Channel 20 and 21 is allocated for memcpy */ - ti,edma-memcpy-channels = /bits/ 16 <20 21>; - /* The following PaRAM slots are reserved: 35-45 and 100-110 */ - ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>, - /bits/ 16 <100 10>; + ti,edma-memcpy-channels = <20 21>; + /* The following PaRAM slots are reserved: 35-44 and 100-109 */ + ti,edma-reserved-slot-ranges = <35 10>, <100 10>; }; edma_tptc0: tptc@49800000 { |
