diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
11 files changed, 286 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 2b7b3fa588d7..606da38c0959 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -1,11 +1,14 @@ -* Amlogic Meson8b Clock and Reset Unit +* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit -The Amlogic Meson8b clock controller generates and supplies clock to various -controllers within the SoC. +The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and +supplies clock to various controllers within the SoC. Required Properties: -- compatible: should be "amlogic,meson8b-clkc" +- compatible: must be one of: + - "amlogic,meson8-clkc" for Meson8 (S802) SoCs + - "amlogic,meson8b-clkc" for Meson8 (S805) SoCs + - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs - reg: it must be composed by two tuples: 0) physical base address of the xtal register and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt index 6f66e9aa354c..f2c5f0e4a363 100644 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -219,3 +219,79 @@ BCM63138 -------- PLL and leaf clock compatible strings for BCM63138 are: "brcm,bcm63138-armpll" + +Stingray +----------- +PLL and leaf clock compatible strings for Stingray are: + "brcm,sr-genpll0" + "brcm,sr-genpll1" + "brcm,sr-genpll2" + "brcm,sr-genpll3" + "brcm,sr-genpll4" + "brcm,sr-genpll5" + "brcm,sr-genpll6" + + "brcm,sr-lcpll0" + "brcm,sr-lcpll1" + "brcm,sr-lcpll-pcie" + + +The following table defines the set of PLL/clock index and ID for Stingray. +These clock IDs are defined in: + "include/dt-bindings/clock/bcm-sr.h" + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + crmu_ref25m crystal N/A N/A + + genpll0 crystal 0 BCM_SR_GENPLL0 + clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK + clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK + clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK + clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK + clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK + clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK + + genpll1 crystal 0 BCM_SR_GENPLL1 + clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK + clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK + + genpll2 crystal 0 BCM_SR_GENPLL2 + clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK + clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK + clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK + clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK + clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH + + genpll3 crystal 0 BCM_SR_GENPLL3 + clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK + clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK + + genpll4 crystal 0 BCM_SR_GENPLL4 + ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK + clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK + noc_clk genpll4 3 BCM_SR_GENPLL4_NOC_CLK + clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK + clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK + + + genpll5 crystal 0 BCM_SR_GENPLL5 + fs4_hf_clk genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK + crypto_ae_clk genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK + raid_ae_clk genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK + + genpll6 crystal 0 BCM_SR_GENPLL6 + 48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK + + lcpll0 crystal 0 BCM_SR_LCPLL0 + clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK + clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK + clk_usb_ref lcpll0 3 BCM_SR_LCPLL0_USB_REF_CLK + sata_refpn lcpll0 3 BCM_SR_LCPLL0_SATA_REFPN_CLK + + lcpll1 crystal 0 BCM_SR_LCPLL1 + wan lcpll1 1 BCM_SR_LCPLL0_WAN_CLK + + lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE + pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt index e4d5feaebc29..ef3deb7b86ea 100644 --- a/Documentation/devicetree/bindings/clock/hi6220-clock.txt +++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt @@ -11,6 +11,7 @@ Required Properties: - compatible: the compatible should be one of the following strings to indicate the clock controller functionality. + - "hisilicon,hi6220-acpu-sctrl" - "hisilicon,hi6220-aoctrl" - "hisilicon,hi6220-sysctrl" - "hisilicon,hi6220-mediactrl" diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 5b4dfc1ea54f..551d03be9665 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -8,6 +8,7 @@ Required properties : "qcom,gcc-apq8084" "qcom,gcc-ipq8064" "qcom,gcc-ipq4019" + "qcom,gcc-ipq8074" "qcom,gcc-msm8660" "qcom,gcc-msm8916" "qcom,gcc-msm8960" diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 6ed469c66b32..6498e1fdbb33 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -57,6 +57,11 @@ Optional properties: - clocks: If clock-frequency is not specified, sysclk may be provided as an input clock. Either clock-frequency or clocks must be provided. + A second input clock, called "coreclk", may be provided if + core PLLs are based on a different input clock from the + platform PLL. +- clock-names: Required if a coreclk is present. Valid names are + "sysclk" and "coreclk". 2. Clock Provider @@ -73,6 +78,7 @@ second cell is the clock index for the specified type. 2 hwaccel index (n in CLKCGnHWACSR) 3 fman 0 for fm1, 1 for fm2 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4 + 5 coreclk must be 0 3. Example diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index f4f944d81308..0cd894f987a3 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -15,6 +15,11 @@ Required Properties: - compatible: Must be one of: - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M) - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E) + - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2) + - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W) + - "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H) + - "renesas,r8a7793-cpg-mssr" for the r8a7793 SoC (R-Car M2-N) + - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W) @@ -24,9 +29,10 @@ Required Properties: - clocks: References to external parent clocks, one entry for each entry in clock-names - clock-names: List of external parent clock names. Valid names are: - - "extal" (r8a7743, r8a7745, r8a7795, r8a7796) + - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794, + r8a7795, r8a7796) - "extalr" (r8a7795, r8a7796) - - "usb_extal" (r8a7743, r8a7745) + - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794) - #clock-cells: Must be 2 - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt new file mode 100644 index 000000000000..455a9a00a623 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt @@ -0,0 +1,56 @@ +* Rockchip RK3128 Clock and Reset Unit + +The RK3128 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: should be "rockchip,rk3128-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "ext_i2s" - external I2S clock - optional, + - "gmac_clkin" - external GMAC clock - optional + +Example: Clock controller node: + + cru: cru@20000000 { + compatible = "rockchip,rk3128-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart2: serial@20068000 { + compatible = "rockchip,serial"; + reg = <0x20068000 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "sclk_uart", "pclk_uart"; + }; diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt new file mode 100644 index 000000000000..631d27cd89d6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt @@ -0,0 +1,31 @@ +Allwinner Display Engine 2.0 Clock Control Binding +-------------------------------------------------- + +Required properties : +- compatible: must contain one of the following compatibles: + - "allwinner,sun8i-a83t-de2-clk" + - "allwinner,sun8i-v3s-de2-clk" + - "allwinner,sun50i-h5-de2-clk" + +- reg: Must contain the registers base address and length +- clocks: phandle to the clocks feeding the display engine subsystem. + Three are needed: + - "mod": the display engine module clock + - "bus": the bus clock for the whole display engine subsystem +- clock-names: Must contain the clock names described just above +- resets: phandle to the reset control for the display engine subsystem. +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example: +de2_clocks: clock@1000000 { + compatible = "allwinner,sun8i-a83t-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index e9c5a1d9834a..df9fad58facd 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -6,6 +6,8 @@ Required properties : - "allwinner,sun6i-a31-ccu" - "allwinner,sun8i-a23-ccu" - "allwinner,sun8i-a33-ccu" + - "allwinner,sun8i-a83t-ccu" + - "allwinner,sun8i-a83t-r-ccu" - "allwinner,sun8i-h3-ccu" - "allwinner,sun8i-h3-r-ccu" - "allwinner,sun8i-v3s-ccu" @@ -18,11 +20,13 @@ Required properties : - clocks: phandle to the oscillators feeding the CCU. Two are needed: - "hosc": the high frequency oscillator (usually at 24MHz) - "losc": the low frequency oscillator (usually at 32kHz) + On the A83T, this is the internal 16MHz oscillator divided by 512 - clock-names: Must contain the clock names described just above - #clock-cells : must contain 1 - #reset-cells : must contain 1 -For the PRCM CCUs on H3/A64, one more clock is needed: +For the PRCM CCUs on A83T/H3/A64, two more clocks are needed: +- "pll-periph": the SoC's peripheral PLL from the main CCU - "iosc": the SoC's internal frequency oscillator Example for generic CCU: @@ -39,8 +43,8 @@ Example for PRCM CCU: r_ccu: clock@01f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>; - clock-names = "hosc", "losc", "iosc"; + clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt new file mode 100644 index 000000000000..1e884c40ab50 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt @@ -0,0 +1,37 @@ +Texas Instruments TI-SCI Clocks +=============================== + +All clocks on Texas Instruments' SoCs that contain a System Controller, +are only controlled by this entity. Communication between a host processor +running an OS and the System Controller happens through a protocol known +as TI-SCI[1]. This clock implementation plugs into the common clock +framework and makes use of the TI-SCI protocol on clock API requests. + +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt + +Required properties: +------------------- +- compatible: Must be "ti,k2g-sci-clk" +- #clock-cells: Shall be 2. + In clock consumers, this cell represents the device ID and clock ID + exposed by the PM firmware. The assignments can be found in the header + files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and + <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc> + is the SoC involved, for example 'k2g'. + +Examples: +-------- + +pmmc: pmmc { + compatible = "ti,k2g-sci"; + + k2g_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; +}; + +uart0: serial@2530c00 { + compatible = "ns16550a"; + clocks = <&k2g_clks 0x2c 0>; +}; diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt new file mode 100644 index 000000000000..48ee6991f2cc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt @@ -0,0 +1,56 @@ +Texas Instruments clkctrl clock binding + +Texas Instruments SoCs can have a clkctrl clock controller for each +interconnect target module. The clkctrl clock controller manages functional +and interface clocks for each module. Each clkctrl controller can also +gate one or more optional functional clocks for a module, and can have one +or more clock muxes. There is a clkctrl clock controller typically for each +interconnect target module on omap4 and later variants. + +The clock consumers can specify the index of the clkctrl clock using +the hardware offset from the clkctrl instance register space. The optional +clocks can be specified by clkctrl hardware offset and the index of the +optional clock. + +For more information, please see the Linux clock framework binding at +Documentation/devicetree/bindings/clock/clock-bindings.txt. + +Required properties : +- compatible : shall be "ti,clkctrl" +- #clock-cells : shall contain 2 with the first entry being the instance + offset from the clock domain base and the second being the + clock index + +Example: Clock controller node on omap 4430: + +&cm2 { + l4per: cm@1400 { + cm_l4per@0 { + cm_l4per_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x1b0>; + #clock-cells = <2>; + }; + }; + }; +}; + +Example: Preprocessor helper macros in dt-bindings/clock/ti-clkctrl.h + +#define OMAP4_CLKCTRL_OFFSET 0x20 +#define OMAP4_CLKCTRL_INDEX(offset) ((offset) - OMAP4_CLKCTRL_OFFSET) +#define MODULEMODE_HWCTRL 1 +#define MODULEMODE_SWCTRL 2 + +#define OMAP4_GPTIMER10_CLKTRL OMAP4_CLKCTRL_INDEX(0x28) +#define OMAP4_GPTIMER11_CLKTRL OMAP4_CLKCTRL_INDEX(0x30) +#define OMAP4_GPTIMER2_CLKTRL OMAP4_CLKCTRL_INDEX(0x38) +... +#define OMAP4_GPIO2_CLKCTRL OMAP_CLKCTRL_INDEX(0x60) + +Example: Clock consumer node for GPIO2: + +&gpio2 { + clocks = <&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 0 + &cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 8>; +}; |
