diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/twl4030-power.txt | 17 | ||||
| -rw-r--r-- | drivers/mfd/twl4030-power.c | 286 | ||||
| -rw-r--r-- | include/linux/i2c/twl.h | 4 |
3 files changed, 281 insertions, 26 deletions
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt index 8e15ec35ac99..b9ee7b98d3e2 100644 --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt @@ -5,7 +5,22 @@ to control the power resources, including power scripts. For now, the binding only supports the complete shutdown of the system after poweroff. Required properties: -- compatible : must be "ti,twl4030-power" +- compatible : must be one of the following + "ti,twl4030-power" + "ti,twl4030-power-reset" + "ti,twl4030-power-idle" + "ti,twl4030-power-idle-osc-off" + +The use of ti,twl4030-power-reset is recommended at least on +3530 that needs a special configuration for warm reset to work. + +When using ti,twl4030-power-idle, the TI recommended configuration +for idle modes is loaded to the tlw4030 PMIC. + +When using ti,twl4030-power-idle-osc-off, the TI recommended +configuration is used with the external oscillator being shut +down during off-idle. Note that this does not work on all boards +depending on how the external oscillator is wired. Optional properties: - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 96162b62f3c0..3bc969a5916b 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -29,13 +29,21 @@ #include <linux/i2c/twl.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/of_device.h> #include <asm/mach-types.h> static u8 twl4030_start_script_address = 0x2b; -#define PWR_P1_SW_EVENTS 0x10 -#define PWR_DEVOFF (1 << 0) +/* Register bits for P1, P2 and P3_SW_EVENTS */ +#define PWR_STOPON_PRWON BIT(6) +#define PWR_STOPON_SYSEN BIT(5) +#define PWR_ENABLE_WARMRESET BIT(4) +#define PWR_LVL_WAKEUP BIT(3) +#define PWR_DEVACT BIT(2) +#define PWR_DEVSLP BIT(1) +#define PWR_DEVOFF BIT(0) + #define SEQ_OFFSYNC (1 << 0) #define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) @@ -52,10 +60,6 @@ static u8 twl4030_start_script_address = 0x2b; #define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37) #define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38) -#define LVL_WAKEUP 0x08 - -#define ENABLE_WARMRESET (1<<4) - #define END_OF_SCRIPT 0x3f #define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55) @@ -125,6 +129,53 @@ static u8 res_config_addrs[] = { [RES_MAIN_REF] = 0x94, }; +/* + * Usable values for .remap_sleep and .remap_off + * Based on table "5.3.3 Resource Operating modes" + */ +enum { + TWL_REMAP_OFF = 0, + TWL_REMAP_SLEEP = 8, + TWL_REMAP_ACTIVE = 9, +}; + +/* + * Macros to configure the PM register states for various resources. + * Note that we can make MSG_SINGULAR etc private to this driver once + * omap3 has been made DT only. + */ +#define TWL_DFLT_DELAY 2 /* typically 2 32 KiHz cycles */ +#define TWL_DEV_GRP_P123 (DEV_GRP_P1 | DEV_GRP_P2 | DEV_GRP_P3) +#define TWL_RESOURCE_SET(res, state) \ + { MSG_SINGULAR(DEV_GRP_NULL, (res), (state)), TWL_DFLT_DELAY } +#define TWL_RESOURCE_ON(res) TWL_RESOURCE_SET(res, RES_STATE_ACTIVE) +#define TWL_RESOURCE_OFF(res) TWL_RESOURCE_SET(res, RES_STATE_OFF) +#define TWL_RESOURCE_RESET(res) TWL_RESOURCE_SET(res, RES_STATE_WRST) +/* + * It seems that type1 and type2 is just the resource init order + * number for the type1 and type2 group. + */ +#define TWL_RESOURCE_SET_ACTIVE(res, state) \ + { MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), (state) } +#define TWL_RESOURCE_GROUP_RESET(group, type1, type2) \ + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2), \ + RES_STATE_WRST), TWL_DFLT_DELAY } +#define TWL_RESOURCE_GROUP_SLEEP(group, type, type2) \ + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \ + RES_STATE_SLEEP), TWL_DFLT_DELAY } +#define TWL_RESOURCE_GROUP_ACTIVE(group, type, type2) \ + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \ + RES_STATE_ACTIVE), TWL_DFLT_DELAY } +#define TWL_REMAP_SLEEP(res, devgrp, typ, typ2) \ + { .resource = (res), .devgroup = (devgrp), \ + .type = (typ), .type2 = (typ2), \ + .remap_off = TWL_REMAP_OFF, \ + .remap_sleep = TWL_REMAP_SLEEP, } +#define TWL_REMAP_OFF(res, devgrp, typ, typ2) \ + { .resource = (res), .devgroup = (devgrp), \ + .type = (typ), .type2 = (typ2), \ + .remap_off = TWL_REMAP_OFF, .remap_sleep = TWL_REMAP_OFF, } + static int twl4030_write_script_byte(u8 address, u8 byte) { int err; @@ -196,7 +247,7 @@ static int twl4030_config_wakeup3_sequence(u8 address) err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &data, R_P3_SW_EVENTS); if (err) goto out; - data |= LVL_WAKEUP; + data |= PWR_LVL_WAKEUP; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P3_SW_EVENTS); out: if (err) @@ -219,7 +270,7 @@ static int twl4030_config_wakeup12_sequence(u8 address) if (err) goto out; - data |= LVL_WAKEUP; + data |= PWR_LVL_WAKEUP; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P1_SW_EVENTS); if (err) goto out; @@ -228,7 +279,7 @@ static int twl4030_config_wakeup12_sequence(u8 address) if (err) goto out; - data |= LVL_WAKEUP; + data |= PWR_LVL_WAKEUP; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P2_SW_EVENTS); if (err) goto out; @@ -281,7 +332,7 @@ static int twl4030_config_warmreset_sequence(u8 address) if (err) goto out; - rd_data |= ENABLE_WARMRESET; + rd_data |= PWR_ENABLE_WARMRESET; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P1_SW_EVENTS); if (err) goto out; @@ -290,7 +341,7 @@ static int twl4030_config_warmreset_sequence(u8 address) if (err) goto out; - rd_data |= ENABLE_WARMRESET; + rd_data |= PWR_ENABLE_WARMRESET; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P2_SW_EVENTS); if (err) goto out; @@ -299,7 +350,7 @@ static int twl4030_config_warmreset_sequence(u8 address) if (err) goto out; - rd_data |= ENABLE_WARMRESET; + rd_data |= PWR_ENABLE_WARMRESET; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P3_SW_EVENTS); out: if (err) @@ -421,6 +472,12 @@ static int load_twl4030_script(struct twl4030_script *tscript, goto out; } if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) { + /* Reset any existing sleep script to avoid hangs on reboot */ + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, END_OF_SCRIPT, + R_SEQ_ADD_A2S); + if (err) + goto out; + err = twl4030_config_wakeup12_sequence(address); if (err) goto out; @@ -493,7 +550,8 @@ int twl4030_remove_script(u8 flags) return err; } -static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) +static int +twl4030_power_configure_scripts(const struct twl4030_power_data *pdata) { int err; int i; @@ -509,12 +567,34 @@ static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) return 0; } -static int twl4030_power_configure_resources(struct twl4030_power_data *pdata) +static void twl4030_patch_rconfig(struct twl4030_resconfig *common, + struct twl4030_resconfig *board) +{ + while (common->resource) { + struct twl4030_resconfig *b = board; + + while (b->resource) { + if (b->resource == common->resource) { + *common = *b; + break; + } + b++; + } + common++; + } +} + +static int +twl4030_power_configure_resources(const struct twl4030_power_data *pdata) { struct twl4030_resconfig *resconfig = pdata->resource_config; + struct twl4030_resconfig *boardconf = pdata->board_config; int err; if (resconfig) { + if (boardconf) + twl4030_patch_rconfig(resconfig, boardconf); + while (resconfig->resource) { err = twl4030_configure_resource(resconfig); if (err) @@ -541,7 +621,7 @@ void twl4030_power_off(void) pr_err("TWL4030 Unable to power off\n"); } -static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata, +static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata, struct device_node *node) { if (pdata && pdata->use_poweroff) @@ -553,10 +633,170 @@ static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata, return false; } +#ifdef CONFIG_OF + +/* Generic warm reset configuration for omap3 */ + +static struct twl4030_ins omap3_wrst_seq[] = { + TWL_RESOURCE_OFF(RES_NRES_PWRON), + TWL_RESOURCE_OFF(RES_RESET), + TWL_RESOURCE_RESET(RES_MAIN_REF), + TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2), + TWL_RESOURCE_RESET(RES_VUSB_3V1), + TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R1), + TWL_RESOURCE_GROUP_RESET(RES_GRP_RC, RES_TYPE_ALL, RES_TYPE2_R0), + TWL_RESOURCE_ON(RES_RESET), + TWL_RESOURCE_ON(RES_NRES_PWRON), +}; + +static struct twl4030_script omap3_wrst_script = { + .script = omap3_wrst_seq, + .size = ARRAY_SIZE(omap3_wrst_seq), + .flags = TWL4030_WRST_SCRIPT, +}; + +static struct twl4030_script *omap3_reset_scripts[] = { + &omap3_wrst_script, +}; + +static struct twl4030_resconfig omap3_rconfig[] = { + TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, -1, -1), + TWL_REMAP_SLEEP(RES_VDD1, DEV_GRP_P1, -1, -1), + TWL_REMAP_SLEEP(RES_VDD2, DEV_GRP_P1, -1, -1), + { 0, 0 }, +}; + +static struct twl4030_power_data omap3_reset = { + .scripts = omap3_reset_scripts, + .num = ARRAY_SIZE(omap3_reset_scripts), + .resource_config = omap3_rconfig, +}; + +/* Recommended generic default idle configuration for off-idle */ + +/* Broadcast message to put res to sleep */ +static struct twl4030_ins omap3_idle_sleep_on_seq[] = { + TWL_RESOURCE_GROUP_SLEEP(RES_GRP_ALL, RES_TYPE_ALL, 0), +}; + +static struct twl4030_script omap3_idle_sleep_on_script = { + .script = omap3_idle_sleep_on_seq, + .size = ARRAY_SIZE(omap3_idle_sleep_on_seq), + .flags = TWL4030_SLEEP_SCRIPT, +}; + +/* Broadcast message to put res to active */ +static struct twl4030_ins omap3_idle_wakeup_p12_seq[] = { + TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0), +}; + +static struct twl4030_script omap3_idle_wakeup_p12_script = { + .script = omap3_idle_wakeup_p12_seq, + .size = ARRAY_SIZE(omap3_idle_wakeup_p12_seq), + .flags = TWL4030_WAKEUP12_SCRIPT, +}; + +/* Broadcast message to put res to active */ +static struct twl4030_ins omap3_idle_wakeup_p3_seq[] = { + TWL_RESOURCE_SET_ACTIVE(RES_CLKEN, 0x37), + TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0), +}; + +static struct twl4030_script omap3_idle_wakeup_p3_script = { + .script = omap3_idle_wakeup_p3_seq, + .size = ARRAY_SIZE(omap3_idle_wakeup_p3_seq), + .flags = TWL4030_WAKEUP3_SCRIPT, +}; + +static struct twl4030_script *omap3_idle_scripts[] = { + &omap3_idle_wakeup_p12_script, + &omap3_idle_wakeup_p3_script, + &omap3_wrst_script, + &omap3_idle_sleep_on_script, +}; + +/* + * Recommended configuration based on "Recommended Sleep + * Sequences for the Zoom Platform": + * http://omappedia.com/wiki/File:Recommended_Sleep_Sequences_Zoom.pdf + * Note that the type1 and type2 seem to be just the init order number + * for type1 and type2 groups as specified in the document mentioned + * above. + */ +static struct twl4030_resconfig omap3_idle_rconfig[] = { + TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0), + TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1), + TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0), + TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2), + TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2), + TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2), + TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2), + TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1), + TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1), + TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0), + /* Resource #20 USB charge pump skipped */ + TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1), + TWL_REMAP_SLEEP(RES_NRES_PWRON, TWL_DEV_GRP_P123, 0, 1), + TWL_REMAP_SLEEP(RES_CLKEN, TWL_DEV_GRP_P123, 3, 2), + TWL_REMAP_SLEEP(RES_SYSEN, TWL_DEV_GRP_P123, 6, 1), + TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, 0, 2), + TWL_REMAP_SLEEP(RES_32KCLKOUT, TWL_DEV_GRP_P123, 0, 0), + TWL_REMAP_SLEEP(RES_RESET, TWL_DEV_GRP_P123, 6, 0), + TWL_REMAP_SLEEP(RES_MAIN_REF, TWL_DEV_GRP_P123, 0, 0), + { /* Terminator */ }, +}; + +static struct twl4030_power_data omap3_idle = { + .scripts = omap3_idle_scripts, + .num = ARRAY_SIZE(omap3_idle_scripts), + .resource_config = omap3_idle_rconfig, +}; + +/* Disable 32 KiHz oscillator during idle */ +static struct twl4030_resconfig osc_off_rconfig[] = { + TWL_REMAP_OFF(RES_CLKEN, DEV_GRP_P1 | DEV_GRP_P3, 3, 2), + { /* Terminator */ }, +}; + +static struct twl4030_power_data osc_off_idle = { + .scripts = omap3_idle_scripts, + .num = ARRAY_SIZE(omap3_idle_scripts), + .resource_config = omap3_idle_rconfig, + .board_config = osc_off_rconfig, +}; + +static struct of_device_id twl4030_power_of_match[] = { + { + .compatible = "ti,twl4030-power-reset", + .data = &omap3_reset, + }, + { + .compatible = "ti,twl4030-power-idle", + .data = &omap3_idle, + }, + { + .compatible = "ti,twl4030-power-idle-osc-off", + .data = &osc_off_idle, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl4030_power_of_match); +#endif /* CONFIG_OF */ + static int twl4030_power_probe(struct platform_device *pdev) { - struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev); + const struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev); struct device_node *node = pdev->dev.of_node; + const struct of_device_id *match; int err = 0; int err2 = 0; u8 val; @@ -577,8 +817,12 @@ static int twl4030_power_probe(struct platform_device *pdev) return err; } + match = of_match_device(of_match_ptr(twl4030_power_of_match), + &pdev->dev); + if (match && match->data) + pdata = match->data; + if (pdata) { - /* TODO: convert to device tree */ err = twl4030_power_configure_scripts(pdata); if (err) { pr_err("TWL4030 failed to load scripts\n"); @@ -628,14 +872,6 @@ static int twl4030_power_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF -static const struct of_device_id twl4030_power_of_match[] = { - {.compatible = "ti,twl4030-power", }, - { }, -}; -MODULE_DEVICE_TABLE(of, twl4030_power_of_match); -#endif - static struct platform_driver twl4030_power_driver = { .driver = { .name = "twl4030_power", diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index d2b16704624c..8cfb50f38529 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -498,7 +498,10 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot) #define RES_GRP_ALL 0x7 /* All resource groups */ #define RES_TYPE2_R0 0x0 +#define RES_TYPE2_R1 0x1 +#define RES_TYPE2_R2 0x2 +#define RES_TYPE_R0 0x0 #define RES_TYPE_ALL 0x7 /* Resource states */ @@ -671,6 +674,7 @@ struct twl4030_power_data { struct twl4030_script **scripts; unsigned num; struct twl4030_resconfig *resource_config; + struct twl4030_resconfig *board_config; #define TWL4030_RESCONFIG_UNDEF ((u8)-1) bool use_poweroff; /* Board is wired for TWL poweroff */ }; |
