diff options
-rw-r--r-- | drivers/serial/serial_txx9.c | 113 |
1 files changed, 92 insertions, 21 deletions
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index 7313c2edcb83..54dd16d66a4b 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -461,6 +461,94 @@ static void serial_txx9_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&up->port.lock, flags); } +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL) +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_txx9_port *up) +{ + unsigned int tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + while (--tmout && + !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) + udelay(1); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) + udelay(1); + } +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial_txx9_get_poll_char(struct uart_port *port) +{ + unsigned int ier; + unsigned char c; + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID) + ; + + c = sio_in(up, TXX9_SIRFIFO); + + /* + * Finally, clear RX interrupt status + * and restore the IER + */ + sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS); + sio_out(up, TXX9_SIDICR, ier); + return c; +} + + +static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) +{ + unsigned int ier; + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + wait_for_xmitr(up); + /* + * Send the character out. + * If a LF, also do CR... + */ + sio_out(up, TXX9_SITFIFO, c); + if (c == 10) { + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIDICR, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + static int serial_txx9_startup(struct uart_port *port) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; @@ -781,6 +869,10 @@ static struct uart_ops serial_txx9_pops = { .release_port = serial_txx9_release_port, .request_port = serial_txx9_request_port, .config_port = serial_txx9_config_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial_txx9_get_poll_char, + .poll_put_char = serial_txx9_put_poll_char, +#endif }; static struct uart_txx9_port serial_txx9_ports[UART_NR]; @@ -803,27 +895,6 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv, #ifdef CONFIG_SERIAL_TXX9_CONSOLE -/* - * Wait for transmitter & holding register to empty - */ -static inline void wait_for_xmitr(struct uart_txx9_port *up) -{ - unsigned int tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - while (--tmout && - !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) - udelay(1); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) - udelay(1); - } -} - static void serial_txx9_console_putchar(struct uart_port *port, int ch) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; |