1963 files changed, 105912 insertions, 35817 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
index 0a92a7c93a62..4f29e5f1ebfa 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -31,3 +31,31 @@ Date:		March 2009
 Kernel Version: 2.6.30
 Contact:	iss_storagedev@hp.com
 Description:	A symbolic link to /sys/block/cciss!cXdY
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
+Date:		August 2009
+Kernel Version:	2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Kicks of a rescan of the controller to discover logical
+		drive topology changes.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the 8-byte LUN ID used to address logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the RAID level of logical drive Y of
+		controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the usage count (number of opens) of logical drive Y
+		of controller X.
diff --git a/Documentation/ABI/testing/sysfs-class-usb_host b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
index 46b66ad1f1b4..4e8106f7cfd9 100644
--- a/Documentation/ABI/testing/sysfs-class-usb_host
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -1,4 +1,4 @@
-What:           /sys/class/usb_host/usb_hostN/wusb_chid
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
@@ -9,7 +9,7 @@ Description:
 
                 Set an all zero CHID to stop the host controller.
 
-What:           /sys/class/usb_host/usb_hostN/wusb_trust_timeout
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index b7f9d3b4bbf6..72651f788f4e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -232,7 +232,7 @@ your e-mail client so that it sends your patches untouched.
 When sending patches to Linus, always follow step #7.
 
 Large changes are not appropriate for mailing lists, and some
-maintainers.  If your patch, uncompressed, exceeds 40 kB in size,
+maintainers.  If your patch, uncompressed, exceeds 300 kB in size,
 it is preferred that you store your patch on an Internet-accessible
 server, and provide instead a URL (link) pointing to your patch.
 
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt
index 074f4be6667f..77fd9376e6d7 100644
--- a/Documentation/arm/tcm.txt
+++ b/Documentation/arm/tcm.txt
@@ -29,11 +29,13 @@ TCM location and size. Notice that this is not a MMU table: you
 actually move the physical location of the TCM around. At the
 place you put it, it will mask any underlying RAM from the
 CPU so it is usually wise not to overlap any physical RAM with
-the TCM. The TCM memory exists totally outside the MMU and will
-override any MMU mappings.
+the TCM.
 
-Code executing inside the ITCM does not "see" any MMU mappings
-and e.g. register accesses must be made to physical addresses.
+The TCM memory can then be remapped to another address again using
+the MMU, but notice that the TCM if often used in situations where
+the MMU is turned off. To avoid confusion the current Linux
+implementation will map the TCM 1 to 1 from physical to virtual
+memory in the location specified by the machine.
 
 TCM is used for a few things:
 
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 455d4e6d346d..0b33bfe7dde9 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -227,7 +227,14 @@ as the path relative to the root of the cgroup file system.
 Each cgroup is represented by a directory in the cgroup file system
 containing the following files describing that cgroup:
 
- - tasks: list of tasks (by pid) attached to that cgroup
+ - tasks: list of tasks (by pid) attached to that cgroup.  This list
+   is not guaranteed to be sorted.  Writing a thread id into this file
+   moves the thread into this cgroup.
+ - cgroup.procs: list of tgids in the cgroup.  This list is not
+   guaranteed to be sorted or free of duplicate tgids, and userspace
+   should sort/uniquify the list if this property is required.
+   Writing a tgid into this file moves all threads with that tgid into
+   this cgroup.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)
@@ -374,7 +381,7 @@ Now you want to do something with this cgroup.
 
 In this directory you can find several files:
 # ls
-notify_on_release tasks
+cgroup.procs notify_on_release tasks
 (plus whatever files added by the attached subsystems)
 
 Now attach your shell to this cgroup:
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index 1711adc33373..b07add3467f1 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -34,7 +34,7 @@ static char cn_test_name[] = "cn_test";
 static struct sock *nls;
 static struct timer_list cn_test_timer;
 
-static void cn_test_callback(struct cn_msg *msg)
+static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
 	pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
 	        __func__, jiffies, msg->id.idx, msg->id.val,
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt
index 81e6bf6ead57..78c9466a9aa8 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/connector/connector.txt
@@ -23,7 +23,7 @@ handling, etc...  The Connector driver allows any kernelspace agents to use
 netlink based networking for inter-process communication in a significantly
 easier way:
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
 
 struct cb_id
@@ -53,15 +53,15 @@ struct cn_msg
 Connector interfaces.
 /*****************************************/
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 
  Registers new callback with connector core.
 
  struct cb_id *id		- unique connector's user identifier.
 				  It must be registered in connector.h for legal in-kernel users.
  char *name			- connector's callback symbolic name.
- void (*callback) (void *)	- connector's callback.
-				  Argument must be dereferenced to struct cn_msg *.
+ void (*callback) (struct cn..)	- connector's callback.
+				  cn_msg and the sender's credentials
 
 
 void cn_del_callback(struct cb_id *id);
diff --git a/Documentation/debugging-via-ohci1394.txt b/Documentation/debugging-via-ohci1394.txt
index 59a91e5c6909..611f5a5499b1 100644
--- a/Documentation/debugging-via-ohci1394.txt
+++ b/Documentation/debugging-via-ohci1394.txt
@@ -64,14 +64,14 @@ be used to view the printk buffer of a remote machine, even with live update.
 
 Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
 from 32-bit firescope and vice versa:
-- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2
+- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
 
 and he implemented fast system dump (alpha version - read README.txt):
-- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2
+- http://halobates.de/firewire/firedump-0.1.tar.bz2
 
 There is also a gdb proxy for firewire which allows to use gdb to access
 data which can be referenced from symbols found by gdb in vmlinux:
-- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2
+- http://halobates.de/firewire/fireproxy-0.33.tar.bz2
 
 The latest version of this gdb proxy (fireproxy-0.34) can communicate (not
 yet stable) with kgdb over an memory-based communication module (kgdbom).
@@ -178,7 +178,7 @@ Step-by-step instructions for using firescope with early OHCI initialization:
 
 Notes
 -----
-Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs
+Documentation and specifications: http://halobates.de/firewire/
 
 FireWire is a trademark of Apple Inc. - for more information please refer to:
 http://en.wikipedia.org/wiki/FireWire
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 89a47b5aff07..bc693fffabe0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -418,6 +418,14 @@ When:	2.6.33
 Why:	Should be implemented in userspace, policy daemon.
 Who:	Johannes Berg <johannes@sipsolutions.net>
 
+---------------------------
+
+What:	CONFIG_INOTIFY
+When:	2.6.33
+Why:	last user (audit) will be converted to the newer more generic
+	and more easily maintained fsnotify subsystem
+Who:	Eric Paris <eparis@redhat.com>
+
 ----------------------------
 
 What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
@@ -451,3 +459,33 @@ Why:	OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
 	will also allow making ALSA OSS emulation independent of
 	sound_core.  The dependency will be broken then too.
 Who:	Tejun Heo <tj@kernel.org>
+
+----------------------------
+
+What:	Support for VMware's guest paravirtuliazation technique [VMI] will be
+	dropped.
+When:	2.6.37 or earlier.
+Why:	With the recent innovations in CPU hardware acceleration technologies
+	from Intel and AMD, VMware ran a few experiments to compare these
+	techniques to guest paravirtualization technique on VMware's platform.
+	These hardware assisted virtualization techniques have outperformed the
+	performance benefits provided by VMI in most of the workloads. VMware
+	expects that these hardware features will be ubiquitous in a couple of
+	years, as a result, VMware has started a phased retirement of this
+	feature from the hypervisor. We will be removing this feature from the
+	Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
+	technical reasons (read opportunity to remove major chunk of pvops)
+	arise.
+
+	Please note that VMI has always been an optimization and non-VMI kernels
+	still work fine on VMware's platform.
+	Latest versions of VMware's product which support VMI are,
+	Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
+	releases for these products will continue supporting VMI.
+
+	For more details about VMI retirement take a look at this,
+	http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
+
+Who:	Alok N Kataria <akataria@vmware.com>
+
+----------------------------
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 570f9bd9be2b..05d5cf1d743f 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -123,10 +123,18 @@ resuid=n		The user ID which may use the reserved blocks.
 
 sb=n			Use alternate superblock at this location.
 
-quota
-noquota
-grpquota
-usrquota
+quota			These options are ignored by the filesystem. They
+noquota			are used only by quota tools to recognize volumes
+grpquota		where quota should be turned on. See documentation
+usrquota		in the quota-tools package for more details
+			(http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>	These options tell filesystem details about quota
+usrjquota=<file>	so that quota information can be properly updated
+grpjquota=<file>	during journal replay. They replace the above
+			quota options. See documentation in the quota-tools
+			package for more details
+			(http://sourceforge.net/projects/linuxquota).
 
 bh		(*)	ext3 associates buffer heads to data pages to
 nobh			(a) cache disk block mapping information
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 18b5ec8cea45..bf4f4b7e11b3 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -282,9 +282,16 @@ stripe=n		Number of filesystem blocks that mballoc will try
 			to use for allocation size and alignment. For RAID5/6
 			systems this should be the number of data
 			disks *  RAID chunk size in file system blocks.
-delalloc	(*)	Deferring block allocation until write-out time.
-nodelalloc		Disable delayed allocation. Blocks are allocation
-			when data is copied from user to page cache.
+
+delalloc	(*)	Defer block allocation until just before ext4
+			writes out the block(s) in question.  This
+			allows ext4 to better allocation decisions
+			more efficiently.
+nodelalloc		Disable delayed allocation.  Blocks are allocated
+			when the data is copied from userspace to the
+			page cache, either via the write(2) system call
+			or when an mmap'ed page which was previously
+			unallocated is written for the first time.
 
 max_batch_time=usec	Maximum amount of time ext4 should wait for
 			additional filesystem operations to be batch
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index b5aee7838a00..2c48f945546b 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1113,7 +1113,6 @@ Table 1-12: Files in /proc/fs/ext4/<devname>
 ..............................................................................
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
- mb_history      multiblock allocation history
 ..............................................................................
 
 
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index b58b84b50fa2..eed520fd0c8e 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -102,7 +102,7 @@ shortname=lower|win95|winnt|mixed
 		 winnt: emulate the Windows NT rule for display/create.
 		 mixed: emulate the Windows NT rule for display,
 			emulate the Windows 95 rule for create.
-		 Default setting is `lower'.
+		 Default setting is `mixed'.
 
 tz=UTC        -- Interpret timestamps as UTC rather than local time.
                  This option disables the conversion of timestamps
diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt
index 84eb26808dee..cb8a3a00cc92 100644
--- a/Documentation/flexible-arrays.txt
+++ b/Documentation/flexible-arrays.txt
@@ -1,5 +1,5 @@
 Using flexible arrays in the kernel
-Last updated for 2.6.31
+Last updated for 2.6.32
 Jonathan Corbet <corbet@lwn.net>
 
 Large contiguous memory allocations can be unreliable in the Linux kernel.
@@ -40,6 +40,13 @@ argument is passed directly to the internal memory allocation calls.  With
 the current code, using flags to ask for high memory is likely to lead to
 notably unpleasant side effects.
 
+It is also possible to define flexible arrays at compile time with:
+
+    DEFINE_FLEX_ARRAY(name, element_size, total);
+
+This macro will result in a definition of an array with the given name; the
+element size and total will be checked for validity at compile time.
+
 Storing data into a flexible array is accomplished with a call to:
 
     int flex_array_put(struct flex_array *array, unsigned int element_nr,
@@ -76,16 +83,30 @@ particular element has never been allocated.
 Note that it is possible to get back a valid pointer for an element which
 has never been stored in the array.  Memory for array elements is allocated
 one page at a time; a single allocation could provide memory for several
-adjacent elements.  The flexible array code does not know if a specific
-element has been written; it only knows if the associated memory is
-present.  So a flex_array_get() call on an element which was never stored
-in the array has the potential to return a pointer to random data.  If the
-caller does not have a separate way to know which elements were actually
-stored, it might be wise, at least, to add GFP_ZERO to the flags argument
-to ensure that all elements are zeroed.
-
-There is no way to remove a single element from the array.  It is possible,
-though, to remove all elements with a call to:
+adjacent elements.  Flexible array elements are normally initialized to the
+value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors
+involving that number probably result from use of unstored array entries.
+Note that, if array elements are allocated with __GFP_ZERO, they will be
+initialized to zero and this poisoning will not happen.
+
+Individual elements in the array can be cleared with:
+
+    int flex_array_clear(struct flex_array *array, unsigned int element_nr);
+
+This function will set the given element to FLEX_ARRAY_FREE and return
+zero.  If storage for the indicated element is not allocated for the array,
+flex_array_clear() will return -EINVAL instead.  Note that clearing an
+element does not release the storage associated with it; to reduce the
+allocated size of an array, call:
+
+    int flex_array_shrink(struct flex_array *array);
+
+The return value will be the number of pages of memory actually freed.
+This function works by scanning the array for pages containing nothing but
+FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
+if the array's pages are allocated with __GFP_ZERO.
+
+It is possible to remove all elements of an array with a call to:
 
     void flex_array_free_parts(struct flex_array *array);
 
diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215
index 2e6a21eb656c..c196a1846259 100644
--- a/Documentation/hwmon/ltc4215
+++ b/Documentation/hwmon/ltc4215
@@ -22,12 +22,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4215 at address 0x44
 on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
 
 
 Sysfs entries
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index bae7a3adc5d8..02838a47d862 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -23,12 +23,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4245 at address 0x23
 on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
 
 
 Sysfs entries
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index dcbd502c8792..82def883361b 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -353,10 +353,20 @@ power[1-*]_average		Average power use
 				Unit: microWatt
 				RO
 
-power[1-*]_average_interval	Power use averaging interval
+power[1-*]_average_interval	Power use averaging interval.  A poll
+				notification is sent to this file if the
+				hardware changes the averaging interval.
 				Unit: milliseconds
 				RW
 
+power[1-*]_average_interval_max	Maximum power use averaging interval
+				Unit: milliseconds
+				RO
+
+power[1-*]_average_interval_min	Minimum power use averaging interval
+				Unit: milliseconds
+				RO
+
 power[1-*]_average_highest	Historical average maximum power use
 				Unit: microWatt
 				RO
@@ -365,6 +375,18 @@ power[1-*]_average_lowest	Historical average minimum power use
 				Unit: microWatt
 				RO
 
+power[1-*]_average_max		A poll notification is sent to
+				power[1-*]_average when power use
+				rises above this value.
+				Unit: microWatt
+				RW
+
+power[1-*]_average_min		A poll notification is sent to
+				power[1-*]_average when power use
+				sinks below this value.
+				Unit: microWatt
+				RW
+
 power[1-*]_input		Instantaneous power use
 				Unit: microWatt
 				RO
@@ -381,6 +403,39 @@ power[1-*]_reset_history	Reset input_highest, input_lowest,
 				average_highest and average_lowest.
 				WO
 
+power[1-*]_accuracy		Accuracy of the power meter.
+				Unit: Percent
+				RO
+
+power[1-*]_alarm		1 if the system is drawing more power than the
+				cap allows; 0 otherwise.  A poll notification is
+				sent to this file when the power use exceeds the
+				cap.  This file only appears if the cap is known
+				to be enforced by hardware.
+				RO
+
+power[1-*]_cap			If power use rises above this limit, the
+				system should take action to reduce power use.
+				A poll notification is sent to this file if the
+				cap is changed by the hardware.  The *_cap
+				files only appear if the cap is known to be
+				enforced by hardware.
+				Unit: microWatt
+				RW
+
+power[1-*]_cap_hyst		Margin of hysteresis built around capping and
+				notification.
+				Unit: microWatt
+				RW
+
+power[1-*]_cap_max		Maximum cap that can be set.
+				Unit: microWatt
+				RO
+
+power[1-*]_cap_min		Minimum cap that can be set.
+				Unit: microWatt
+				RO
+
 **********
 * Energy *
 **********
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index c740b7b41088..e89490270aba 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -188,7 +188,7 @@ segment, the address is sufficient to uniquely identify the device to be
 deleted.
 
 Example:
-# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
 
 While this interface should only be used when in-kernel device declaration
 can't be done, there is a variety of cases where it can be helpful:
diff --git a/Documentation/infiniband/user_mad.txt b/Documentation/infiniband/user_mad.txt
index 744687dd195b..8a366959f5cc 100644
--- a/Documentation/infiniband/user_mad.txt
+++ b/Documentation/infiniband/user_mad.txt
@@ -128,8 +128,8 @@ Setting IsSM Capability Bit
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="umad*", NAME="infiniband/%k"
-    KERNEL="issm*", NAME="infiniband/%k"
+    KERNEL=="umad*", NAME="infiniband/%k"
+    KERNEL=="issm*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 
diff --git a/Documentation/infiniband/user_verbs.txt b/Documentation/infiniband/user_verbs.txt
index f847501e50b5..afe3f8da9018 100644
--- a/Documentation/infiniband/user_verbs.txt
+++ b/Documentation/infiniband/user_verbs.txt
@@ -58,7 +58,7 @@ Memory pinning
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="uverbs*", NAME="infiniband/%k"
+    KERNEL=="uverbs*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index 686e107923ec..5fe8de5cc727 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -60,10 +60,9 @@ open() operation on regular files or character devices.
 
 After a successful return from register_appl(), CAPI messages from the
 application may be passed to the driver for the device via calls to the
-send_message() callback function. The CAPI message to send is stored in the
-data portion of an skb. Conversely, the driver may call Kernel CAPI's
-capi_ctr_handle_message() function to pass a received CAPI message to Kernel
-CAPI for forwarding to an application, specifying its ApplID.
+send_message() callback function. Conversely, the driver may call Kernel
+CAPI's capi_ctr_handle_message() function to pass a received CAPI message to
+Kernel CAPI for forwarding to an application, specifying its ApplID.
 
 Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
 forwarded as calls to the release_appl() callback function, passing the same
@@ -142,6 +141,7 @@ u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
 	to accepting or queueing the message. Errors occurring during the
 	actual processing of the message should be signaled with an
 	appropriate reply message.
+	May be called in process or interrupt context.
 	Calls to this function are not serialized by Kernel CAPI, ie. it must
 	be prepared to be re-entered.
 
@@ -154,7 +154,8 @@ read_proc_t *ctr_read_proc
 	system entry, /proc/capi/controllers/<n>; will be called with a
 	pointer to the device's capi_ctr structure as the last (data) argument
 
-Note: Callback functions are never called in interrupt context.
+Note: Callback functions except send_message() are never called in interrupt
+context.
 
 - to be filled in before calling capi_ctr_ready():
 
@@ -171,14 +172,40 @@ u8 serial[CAPI_SERIAL_LEN]
 	value to return for CAPI_GET_SERIAL
 
 
-4.3 The _cmsg Structure
+4.3 SKBs
+
+CAPI messages are passed between Kernel CAPI and the driver via send_message()
+and capi_ctr_handle_message(), stored in the data portion of a socket buffer
+(skb).  Each skb contains a single CAPI message coded according to the CAPI 2.0
+standard.
+
+For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual
+payload data immediately follows the CAPI message itself within the same skb.
+The Data and Data64 parameters are not used for processing. The Data64
+parameter may be omitted by setting the length field of the CAPI message to 22
+instead of 30.
+
+
+4.4 The _cmsg Structure
 
 (declared in <linux/isdn/capiutil.h>)
 
 The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
-accessible form. It contains members for all possible CAPI 2.0 parameters, of
-which only those appearing in the message type currently being processed are
-actually used. Unused members should be set to zero.
+accessible form. It contains members for all possible CAPI 2.0 parameters,
+including subparameters of the Additional Info and B Protocol structured
+parameters, with the following exceptions:
+
+* second Calling party number (CONNECT_IND)
+
+* Data64 (DATA_B3_REQ and DATA_B3_IND)
+
+* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ)
+
+* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP
+  and SELECT_B_PROTOCOL_REQ)
+
+Only those parameters appearing in the message type currently being processed
+are actually used. Unused members should be set to zero.
 
 Members are named after the CAPI 2.0 standard names of the parameters they
 represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
@@ -190,18 +217,19 @@ u16         for CAPI parameters of type 'word'
 
 u32         for CAPI parameters of type 'dword'
 
-_cstruct    for CAPI parameters of type 'struct' not containing any
-	    variably-sized (struct) subparameters (eg. 'Called Party Number')
+_cstruct    for CAPI parameters of type 'struct'
 	    The member is a pointer to a buffer containing the parameter in
 	    CAPI encoding (length + content). It may also be NULL, which will
 	    be taken to represent an empty (zero length) parameter.
+	    Subparameters are stored in encoded form within the content part.
 
-_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
-	    subparameters ('Additional Info' and 'B Protocol')
+_cmstruct   alternative representation for CAPI parameters of type 'struct'
+	    (used only for the 'Additional Info' and 'B Protocol' parameters)
 	    The representation is a single byte containing one of the values:
-	    CAPI_DEFAULT: the parameter is empty
-	    CAPI_COMPOSE: the values of the subparameters are stored
-	    individually in the corresponding _cmsg structure members
+	    CAPI_DEFAULT: The parameter is empty/absent.
+	    CAPI_COMPOSE: The parameter is present.
+	    Subparameter values are stored individually in the corresponding
+	    _cmsg structure members.
 
 Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
 messages between their transport encoding described in the CAPI 2.0 standard
@@ -297,3 +325,26 @@ char *capi_cmd2str(u8 Command, u8 Subcommand)
 	be NULL if the command/subcommand is not one of those defined in the
 	CAPI 2.0 standard.
 
+
+7. Debugging
+
+The module kernelcapi has a module parameter showcapimsgs controlling some
+debugging output produced by the module. It can only be set when the module is
+loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on
+the command line or in the configuration file.
+
+If the lowest bit of showcapimsgs is set, kernelcapi logs controller and
+application up and down events.
+
+In addition, every registered CAPI controller has an associated traceflag
+parameter controlling how CAPI messages sent from and to tha controller are
+logged. The traceflag parameter is initialized with the value of the
+showcapimsgs parameter when the controller is registered, but can later be
+changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
+
+If the value of traceflag is non-zero, CAPI messages are logged.
+DATA_B3 messages are only logged if the value of traceflag is > 2.
+
+If the lowest bit of traceflag is set, only the command/subcommand and message
+length are logged. Otherwise, kernelcapi logs a readable representation of
+the entire message.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6fa7292947e5..9107b387e91f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
+			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
 
 			Append ",keep" to not disable it when the real console
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index ba9373f82ab5..098de5bce00a 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -42,7 +42,6 @@
 #include <signal.h>
 #include "linux/lguest_launcher.h"
 #include "linux/virtio_config.h"
-#include <linux/virtio_ids.h>
 #include "linux/virtio_net.h"
 #include "linux/virtio_blk.h"
 #include "linux/virtio_console.h"
diff --git a/Documentation/i2c/chips/eeprom b/Documentation/misc-devices/eeprom
index f7e8104b5764..f7e8104b5764 100644
--- a/Documentation/i2c/chips/eeprom
+++ b/Documentation/misc-devices/eeprom
diff --git a/Documentation/i2c/chips/max6875 b/Documentation/misc-devices/max6875
index 10ca43cd1a72..1e89ee3ccc1b 100644
--- a/Documentation/i2c/chips/max6875
+++ b/Documentation/misc-devices/max6875
@@ -42,10 +42,12 @@ General Remarks
 
 Valid addresses for the MAX6875 are 0x50 and 0x52.
 Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
-The driver does not probe any address, so you must force the address.
+The driver does not probe any address, so you explicitly instantiate the
+devices.
 
 Example:
-$ modprobe max6875 force=0,0x50
+$ modprobe max6875
+$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
 
 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
 addresses.  For example, for address 0x50, it also reserves 0x51.
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index c6cf4a3c16e0..61bb645d50e0 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -90,6 +90,11 @@ Examples:
  pgset "dstmac 00:00:00:00:00:00"    sets MAC destination address
  pgset "srcmac 00:00:00:00:00:00"    sets MAC source address
 
+ pgset "queue_map_min 0" Sets the min value of tx queue interval
+ pgset "queue_map_max 7" Sets the max value of tx queue interval, for multiqueue devices
+                         To select queue 1 of a given device,
+                         use queue_map_min=1 and queue_map_max=1
+
  pgset "src_mac_count 1" Sets the number of MACs we'll range through.  
                          The 'minimum' MAC is what you set with srcmac.
 
@@ -101,6 +106,9 @@ Examples:
                               IPDST_RND, UDPSRC_RND,
                               UDPDST_RND, MACSRC_RND, MACDST_RND 
                               MPLS_RND, VID_RND, SVID_RND
+                              QUEUE_MAP_RND # queue map random
+                              QUEUE_MAP_CPU # queue map mirrors smp_processor_id()
+
 
  pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
                          cycle through the port range.
diff --git a/Documentation/networking/timestamping/timestamping.c b/Documentation/networking/timestamping/timestamping.c
index 43d143104210..a7936fe8444a 100644
--- a/Documentation/networking/timestamping/timestamping.c
+++ b/Documentation/networking/timestamping/timestamping.c
@@ -381,7 +381,7 @@ int main(int argc, char **argv)
 	memset(&hwtstamp, 0, sizeof(hwtstamp));
 	strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
 	hwtstamp.ifr_data = (void *)&hwconfig;
-	memset(&hwconfig, 0, sizeof(&hwconfig));
+	memset(&hwconfig, 0, sizeof(hwconfig));
 	hwconfig.tx_type =
 		(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
 		HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt
index a6eb4add1be6..9605179711f4 100644
--- a/Documentation/scsi/hptiop.txt
+++ b/Documentation/scsi/hptiop.txt
@@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
 Controller Register Map
 -------------------------
 
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
 For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
 
      BAR0 offset    Register
@@ -93,7 +112,7 @@ The driver exposes following sysfs attributes:
 
 
 -----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
 
   This file is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index f1708b79f963..4c7f9aee5c4e 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -209,6 +209,7 @@ AD1884A / AD1883 / AD1984A / AD1984B
   laptop	laptop with HP jack sensing
   mobile	mobile devices with HP jack sensing
   thinkpad	Lenovo Thinkpad X300
+  touchsmart	HP Touchsmart
 
 AD1884
 ======
@@ -358,6 +359,7 @@ STAC9227/9228/9229/927x
   5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
+  volknob	Fixes with volume-knob widget 0x24
   auto		BIOS setup (default)
 
 STAC92HD71B*
diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt
new file mode 100644
index 000000000000..3ffadf8da61f
--- /dev/null
+++ b/Documentation/vm/hwpoison.txt
@@ -0,0 +1,136 @@
+What is hwpoison?
+
+Upcoming Intel CPUs have support for recovering from some memory errors
+(``MCA recovery''). This requires the OS to declare a page "poisoned",
+kill the processes associated with it and avoid using it in the future.
+
+This patchkit implements the necessary infrastructure in the VM.
+
+To quote the overview comment:
+
+ * High level machine check handler. Handles pages reported by the
+ * hardware as being corrupted usually due to a 2bit ECC memory or cache
+ * failure.
+ *
+ * This focusses on pages detected as corrupted in the background.
+ * When the current CPU tries to consume corruption the currently
+ * running process can just be killed directly instead. This implies
+ * that if the error cannot be handled for some reason it's safe to
+ * just ignore it because no corruption has been consumed yet. Instead
+ * when that happens another machine check will happen.
+ *
+ * Handles page cache pages in various states. The tricky part
+ * here is that we can access any page asynchronous to other VM
+ * users, because memory failures could happen anytime and anywhere,
+ * possibly violating some of their assumptions. This is why this code
+ * has to be extremely careful. Generally it tries to use normal locking
+ * rules, as in get the standard locks, even if that means the
+ * error handling takes potentially a long time.
+ *
+ * Some of the operations here are somewhat inefficient and have non
+ * linear algorithmic complexity, because the data structures have not
+ * been optimized for this case. This is in particular the case
+ * for the mapping from a vma to a process. Since this case is expected
+ * to be rare we hope we can get away with this.
+
+The code consists of a the high level handler in mm/memory-failure.c,
+a new page poison bit and various checks in the VM to handle poisoned
+pages.
+
+The main target right now is KVM guests, but it works for all kinds
+of applications. KVM support requires a recent qemu-kvm release.
+
+For the KVM use there was need for a new signal type so that
+KVM can inject the machine check into the guest with the proper
+address. This in theory allows other applications to handle
+memory failures too. The expection is that near all applications
+won't do that, but some very specialized ones might.
+
+---
+
+There are two (actually three) modi memory failure recovery can be in:
+
+vm.memory_failure_recovery sysctl set to zero:
+	All memory failures cause a panic. Do not attempt recovery.
+	(on x86 this can be also affected by the tolerant level of the
+	MCE subsystem)
+
+early kill
+	(can be controlled globally and per process)
+	Send SIGBUS to the application as soon as the error is detected
+	This allows applications who can process memory errors in a gentle
+	way (e.g. drop affected object)
+	This is the mode used by KVM qemu.
+
+late kill
+	Send SIGBUS when the application runs into the corrupted page.
+	This is best for memory error unaware applications and default
+	Note some pages are always handled as late kill.
+
+---
+
+User control:
+
+vm.memory_failure_recovery
+	See sysctl.txt
+
+vm.memory_failure_early_kill
+	Enable early kill mode globally
+
+PR_MCE_KILL
+	Set early/late kill mode/revert to system default
+	arg1: PR_MCE_KILL_CLEAR: Revert to system default
+	arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode
+		PR_MCE_KILL_EARLY: Early kill
+		PR_MCE_KILL_LATE:  Late kill
+		PR_MCE_KILL_DEFAULT: Use system global default
+PR_MCE_KILL_GET
+	return current mode
+
+
+---
+
+Testing:
+
+madvise(MADV_POISON, ....)
+	(as root)
+	Poison a page in the process for testing
+
+
+hwpoison-inject module through debugfs
+	/sys/debug/hwpoison/corrupt-pfn
+
+Inject hwpoison fault at PFN echoed into this file
+
+
+Architecture specific MCE injector
+
+x86 has mce-inject, mce-test
+
+Some portable hwpoison test programs in mce-test, see blow.
+
+---
+
+References:
+
+http://halobates.de/mce-lc09-2.pdf
+	Overview presentation from LinuxCon 09
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git
+	Test suite (hwpoison specific portable tests in tsrc)
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git
+	x86 specific injector
+
+
+---
+
+Limitations:
+
+- Not all page types are supported and never will. Most kernel internal
+objects cannot be recovered, only LRU pages for now.
+- Right now hugepage support is missing.
+
+---
+Andi Kleen, Oct 2009
+
diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt
index 72a22f65960e..262d8e6793a3 100644
--- a/Documentation/vm/ksm.txt
+++ b/Documentation/vm/ksm.txt
@@ -52,15 +52,15 @@ The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
 readable by all but writable only by root:
 
 max_kernel_pages - set to maximum number of kernel pages that KSM may use
-                   e.g. "echo 2000 > /sys/kernel/mm/ksm/max_kernel_pages"
+                   e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
                    Value 0 imposes no limit on the kernel pages KSM may use;
                    but note that any process using MADV_MERGEABLE can cause
                    KSM to allocate these pages, unswappable until it exits.
-                   Default: 2000 (chosen for demonstration purposes)
+                   Default: quarter of memory (chosen to not pin too much)
 
 pages_to_scan    - how many present pages to scan before ksmd goes to sleep
-                   e.g. "echo 200 > /sys/kernel/mm/ksm/pages_to_scan"
-                   Default: 200 (chosen for demonstration purposes)
+                   e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
+                   Default: 100 (chosen for demonstration purposes)
 
 sleep_millisecs  - how many milliseconds ksmd should sleep before next scan
                    e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs"
@@ -70,7 +70,8 @@ run              - set 0 to stop ksmd from running but keep merged pages,
                    set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run",
                    set 2 to stop ksmd and unmerge all pages currently merged,
                          but leave mergeable areas registered for next run
-                   Default: 1 (for immediate use by apps which register)
+                   Default: 0 (must be changed to 1 to activate KSM,
+                               except if CONFIG_SYSFS is disabled)
 
 The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
 
@@ -86,4 +87,4 @@ pages_volatile embraces several different kinds of activity, but a high
 proportion there would also indicate poor use of madvise MADV_MERGEABLE.
 
 Izik Eidus,
-Hugh Dickins, 30 July 2009
+Hugh Dickins, 24 Sept 2009
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index fa1a30d9e9d5..3ec4f2a22585 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -2,7 +2,10 @@
  * page-types: Tool for querying page flags
  *
  * Copyright (C) 2009 Intel corporation
- * Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Authors: Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Released under the General Public License (GPL).
  */
 
 #define _LARGEFILE64_SOURCE
@@ -69,7 +72,9 @@
 #define KPF_COMPOUND_TAIL	16
 #define KPF_HUGE		17
 #define KPF_UNEVICTABLE		18
+#define KPF_HWPOISON		19
 #define KPF_NOPAGE		20
+#define KPF_KSM			21
 
 /* [32-] kernel hacking assistances */
 #define KPF_RESERVED		32
@@ -116,7 +121,9 @@ static char *page_flag_names[] = {
 	[KPF_COMPOUND_TAIL]	= "T:compound_tail",
 	[KPF_HUGE]		= "G:huge",
 	[KPF_UNEVICTABLE]	= "u:unevictable",
+	[KPF_HWPOISON]		= "X:hwpoison",
 	[KPF_NOPAGE]		= "n:nopage",
+	[KPF_KSM]		= "x:ksm",
 
 	[KPF_RESERVED]		= "r:reserved",
 	[KPF_MLOCKED]		= "m:mlocked",
@@ -152,9 +159,6 @@ static unsigned long	opt_size[MAX_ADDR_RANGES];
 static int		nr_vmas;
 static unsigned long	pg_start[MAX_VMAS];
 static unsigned long	pg_end[MAX_VMAS];
-static unsigned long	voffset;
-
-static int		pagemap_fd;
 
 #define MAX_BIT_FILTERS	64
 static int		nr_bit_filters;
@@ -163,9 +167,16 @@ static uint64_t		opt_bits[MAX_BIT_FILTERS];
 
 static int		page_size;
 
-#define PAGES_BATCH	(64 << 10)	/* 64k pages */
+static int		pagemap_fd;
 static int		kpageflags_fd;
 
+static int		opt_hwpoison;
+static int		opt_unpoison;
+
+static char		*hwpoison_debug_fs = "/debug/hwpoison";
+static int		hwpoison_inject_fd;
+static int		hwpoison_forget_fd;
+
 #define HASH_SHIFT	13
 #define HASH_SIZE	(1 << HASH_SHIFT)
 #define HASH_MASK	(HASH_SIZE - 1)
@@ -207,6 +218,74 @@ static void fatal(const char *x, ...)
 	exit(EXIT_FAILURE);
 }
 
+int checked_open(const char *pathname, int flags)
+{
+	int fd = open(pathname, flags);
+
+	if (fd < 0) {
+		perror(pathname);
+		exit(EXIT_FAILURE);
+	}
+
+	return fd;
+}
+
+/*
+ * pagemap/kpageflags routines
+ */
+
+static unsigned long do_u64_read(int fd, char *name,
+				 uint64_t *buf,
+				 unsigned long index,
+				 unsigned long count)
+{
+	long bytes;
+
+	if (index > ULONG_MAX / 8)
+		fatal("index overflow: %lu\n", index);
+
+	if (lseek(fd, index * 8, SEEK_SET) < 0) {
+		perror(name);
+		exit(EXIT_FAILURE);
+	}
+
+	bytes = read(fd, buf, count * 8);
+	if (bytes < 0) {
+		perror(name);
+		exit(EXIT_FAILURE);
+	}
+	if (bytes % 8)
+		fatal("partial read: %lu bytes\n", bytes);
+
+	return bytes / 8;
+}
+
+static unsigned long kpageflags_read(uint64_t *buf,
+				     unsigned long index,
+				     unsigned long pages)
+{
+	return do_u64_read(kpageflags_fd, PROC_KPAGEFLAGS, buf, index, pages);
+}
+
+static unsigned long pagemap_read(uint64_t *buf,
+				  unsigned long index,
+				  unsigned long pages)
+{
+	return do_u64_read(pagemap_fd, "/proc/pid/pagemap", buf, index, pages);
+}
+
+static unsigned long pagemap_pfn(uint64_t val)
+{
+	unsigned long pfn;
+
+	if (val & PM_PRESENT)
+		pfn = PM_PFRAME(val);
+	else
+		pfn = 0;
+
+	return pfn;
+}
+
 
 /*
  * page flag names
@@ -255,7 +334,8 @@ static char *page_flag_longname(uint64_t flags)
  * page list and summary
  */
 
-static void show_page_range(unsigned long offset, uint64_t flags)
+static void show_page_range(unsigned long voffset,
+			    unsigned long offset, uint64_t flags)
 {
 	static uint64_t      flags0;
 	static unsigned long voff;
@@ -281,7 +361,8 @@ static void show_page_range(unsigned long offset, uint64_t flags)
 	count  = 1;
 }
 
-static void show_page(unsigned long offset, uint64_t flags)
+static void show_page(unsigned long voffset,
+		      unsigned long offset, uint64_t flags)
 {
 	if (opt_pid)
 		printf("%lx\t", voffset);
@@ -362,6 +443,62 @@ static uint64_t well_known_flags(uint64_t flags)
 	return flags;
 }
 
+static uint64_t kpageflags_flags(uint64_t flags)
+{
+	flags = expand_overloaded_flags(flags);
+
+	if (!opt_raw)
+		flags = well_known_flags(flags);
+
+	return flags;
+}
+
+/*
+ * page actions
+ */
+
+static void prepare_hwpoison_fd(void)
+{
+	char buf[100];
+
+	if (opt_hwpoison && !hwpoison_inject_fd) {
+		sprintf(buf, "%s/corrupt-pfn", hwpoison_debug_fs);
+		hwpoison_inject_fd = checked_open(buf, O_WRONLY);
+	}
+
+	if (opt_unpoison && !hwpoison_forget_fd) {
+		sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+		hwpoison_forget_fd = checked_open(buf, O_WRONLY);
+	}
+}
+
+static int hwpoison_page(unsigned long offset)
+{
+	char buf[100];
+	int len;
+
+	len = sprintf(buf, "0x%lx\n", offset);
+	len = write(hwpoison_inject_fd, buf, len);
+	if (len < 0) {
+		perror("hwpoison inject");
+		return len;
+	}
+	return 0;
+}
+
+static int unpoison_page(unsigned long offset)
+{
+	char buf[100];
+	int len;
+
+	len = sprintf(buf, "0x%lx\n", offset);
+	len = write(hwpoison_forget_fd, buf, len);
+	if (len < 0) {
+		perror("hwpoison forget");
+		return len;
+	}
+	return 0;
+}
 
 /*
  * page frame walker
@@ -394,104 +531,83 @@ static int hash_slot(uint64_t flags)
 	exit(EXIT_FAILURE);
 }
 
-static void add_page(unsigned long offset, uint64_t flags)
+static void add_page(unsigned long voffset,
+		     unsigned long offset, uint64_t flags)
 {
-	flags = expand_overloaded_flags(flags);
-
-	if (!opt_raw)
-		flags = well_known_flags(flags);
+	flags = kpageflags_flags(flags);
 
 	if (!bit_mask_ok(flags))
 		return;
 
+	if (opt_hwpoison)
+		hwpoison_page(offset);
+	if (opt_unpoison)
+		unpoison_page(offset);
+
 	if (opt_list == 1)
-		show_page_range(offset, flags);
+		show_page_range(voffset, offset, flags);
 	else if (opt_list == 2)
-		show_page(offset, flags);
+		show_page(voffset, offset, flags);
 
 	nr_pages[hash_slot(flags)]++;
 	total_pages++;
 }
 
-static void walk_pfn(unsigned long index, unsigned long count)
+#define KPAGEFLAGS_BATCH	(64 << 10)	/* 64k pages */
+static void walk_pfn(unsigned long voffset,
+		     unsigned long index,
+		     unsigned long count)
 {
+	uint64_t buf[KPAGEFLAGS_BATCH];
 	unsigned long batch;
-	unsigned long n;
+	unsigned long pages;
 	unsigned long i;
 
-	if (index > ULONG_MAX / KPF_BYTES)
-		fatal("index overflow: %lu\n", index);
-
-	lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
-
 	while (count) {
-		uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
-
-		batch = min_t(unsigned long, count, PAGES_BATCH);
-		n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
-		if (n == 0)
+		batch = min_t(unsigned long, count, KPAGEFLAGS_BATCH);
+		pages = kpageflags_read(buf, index, batch);
+		if (pages == 0)
 			break;
-		if (n < 0) {
-			perror(PROC_KPAGEFLAGS);
-			exit(EXIT_FAILURE);
-		}
 
-		if (n % KPF_BYTES != 0)
-			fatal("partial read: %lu bytes\n", n);
-		n = n / KPF_BYTES;
+		for (i = 0; i < pages; i++)
+			add_page(voffset + i, index + i, buf[i]);
 
-		for (i = 0; i < n; i++)
-			add_page(index + i, kpageflags_buf[i]);
-
-		index += batch;
-		count -= batch;
+		index += pages;
+		count -= pages;
 	}
 }
 
-
-#define PAGEMAP_BATCH	4096
-static unsigned long task_pfn(unsigned long pgoff)
+#define PAGEMAP_BATCH	(64 << 10)
+static void walk_vma(unsigned long index, unsigned long count)
 {
-	static uint64_t buf[PAGEMAP_BATCH];
-	static unsigned long start;
-	static long count;
-	uint64_t pfn;
+	uint64_t buf[PAGEMAP_BATCH];
+	unsigned long batch;
+	unsigned long pages;
+	unsigned long pfn;
+	unsigned long i;
 
-	if (pgoff < start || pgoff >= start + count) {
-		if (lseek64(pagemap_fd,
-			    (uint64_t)pgoff * PM_ENTRY_BYTES,
-			    SEEK_SET) < 0) {
-			perror("pagemap seek");
-			exit(EXIT_FAILURE);
-		}
-		count = read(pagemap_fd, buf, sizeof(buf));
-		if (count == 0)
-			return 0;
-		if (count < 0) {
-			perror("pagemap read");
-			exit(EXIT_FAILURE);
-		}
-		if (count % PM_ENTRY_BYTES) {
-			fatal("pagemap read not aligned.\n");
-			exit(EXIT_FAILURE);
-		}
-		count /= PM_ENTRY_BYTES;
-		start = pgoff;
-	}
+	while (count) {
+		batch = min_t(unsigned long, count, PAGEMAP_BATCH);
+		pages = pagemap_read(buf, index, batch);
+		if (pages == 0)
+			break;
 
-	pfn = buf[pgoff - start];
-	if (pfn & PM_PRESENT)
-		pfn = PM_PFRAME(pfn);
-	else
-		pfn = 0;
+		for (i = 0; i < pages; i++) {
+			pfn = pagemap_pfn(buf[i]);
+			if (pfn)
+				walk_pfn(index + i, pfn, 1);
+		}
 
-	return pfn;
+		index += pages;
+		count -= pages;
+	}
 }
 
 static void walk_task(unsigned long index, unsigned long count)
 {
-	int i = 0;
 	const unsigned long end = index + count;
+	unsigned long start;
+	int i = 0;
 
 	while (index < end) {
 
@@ -501,15 +617,11 @@ static void walk_task(unsigned long index, unsigned long count)
 		if (pg_start[i] >= end)
 			return;
 
-		voffset = max_t(unsigned long, pg_start[i], index);
-		index   = min_t(unsigned long, pg_end[i], end);
+		start = max_t(unsigned long, pg_start[i], index);
+		index = min_t(unsigned long, pg_end[i], end);
 
-		assert(voffset < index);
-		for (; voffset < index; voffset++) {
-			unsigned long pfn = task_pfn(voffset);
-			if (pfn)
-				walk_pfn(pfn, 1);
-		}
+		assert(start < index);
+		walk_vma(start, index - start);
 	}
 }
 
@@ -527,18 +639,14 @@ static void walk_addr_ranges(void)
 {
 	int i;
 
-	kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
-	if (kpageflags_fd < 0) {
-		perror(PROC_KPAGEFLAGS);
-		exit(EXIT_FAILURE);
-	}
+	kpageflags_fd = checked_open(PROC_KPAGEFLAGS, O_RDONLY);
 
 	if (!nr_addr_ranges)
 		add_addr_range(0, ULONG_MAX);
 
 	for (i = 0; i < nr_addr_ranges; i++)
 		if (!opt_pid)
-			walk_pfn(opt_offset[i], opt_size[i]);
+			walk_pfn(0, opt_offset[i], opt_size[i]);
 		else
 			walk_task(opt_offset[i], opt_size[i]);
 
@@ -575,6 +683,8 @@ static void usage(void)
 "            -l|--list                 Show page details in ranges\n"
 "            -L|--list-each            Show page details one by one\n"
 "            -N|--no-summary           Don't show summay info\n"
+"            -X|--hwpoison             hwpoison pages\n"
+"            -x|--unpoison             unpoison pages\n"
 "            -h|--help                 Show this usage message\n"
 "addr-spec:\n"
 "            N                         one page at offset N (unit: pages)\n"
@@ -624,11 +734,7 @@ static void parse_pid(const char *str)
 	opt_pid = parse_number(str);
 
 	sprintf(buf, "/proc/%d/pagemap", opt_pid);
-	pagemap_fd = open(buf, O_RDONLY);
-	if (pagemap_fd < 0) {
-		perror(buf);
-		exit(EXIT_FAILURE);
-	}
+	pagemap_fd = checked_open(buf, O_RDONLY);
 
 	sprintf(buf, "/proc/%d/maps", opt_pid);
 	file = fopen(buf, "r");
@@ -788,6 +894,8 @@ static struct option opts[] = {
 	{ "list"      , 0, NULL, 'l' },
 	{ "list-each" , 0, NULL, 'L' },
 	{ "no-summary", 0, NULL, 'N' },
+	{ "hwpoison"  , 0, NULL, 'X' },
+	{ "unpoison"  , 0, NULL, 'x' },
 	{ "help"      , 0, NULL, 'h' },
 	{ NULL        , 0, NULL, 0 }
 };
@@ -799,7 +907,7 @@ int main(int argc, char *argv[])
 	page_size = getpagesize();
 
 	while ((c = getopt_long(argc, argv,
-				"rp:f:a:b:lLNh", opts, NULL)) != -1) {
+				"rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
 		switch (c) {
 		case 'r':
 			opt_raw = 1;
@@ -825,6 +933,14 @@ int main(int argc, char *argv[])
 		case 'N':
 			opt_no_summary = 1;
 			break;
+		case 'X':
+			opt_hwpoison = 1;
+			prepare_hwpoison_fd();
+			break;
+		case 'x':
+			opt_unpoison = 1;
+			prepare_hwpoison_fd();
+			break;
 		case 'h':
 			usage();
 			exit(0);
@@ -844,7 +960,7 @@ int main(int argc, char *argv[])
 	walk_addr_ranges();
 
 	if (opt_list == 1)
-		show_page_range(0, 0);  /* drain the buffer */
+		show_page_range(0, 0, 0);  /* drain the buffer */
 
 	if (opt_no_summary)
 		return 0;
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
index 600a304a828c..df09b9650a81 100644
--- a/Documentation/vm/pagemap.txt
+++ b/Documentation/vm/pagemap.txt
@@ -57,7 +57,9 @@ There are three components to pagemap:
     16. COMPOUND_TAIL
     16. HUGE
     18. UNEVICTABLE
+    19. HWPOISON
     20. NOPAGE
+    21. KSM
 
 Short descriptions to the page flags:
 
@@ -86,9 +88,15 @@ Short descriptions to the page flags:
 17. HUGE
     this is an integral part of a HugeTLB page
 
+19. HWPOISON
+    hardware detected memory corruption on this page: don't touch the data!
+
 20. NOPAGE
     no page frame exists at the requested address
 
+21. KSM
+    identical memory pages dynamically shared between one or more processes
+
     [IO related page flags]
  1. ERROR     IO error occurred
  3. UPTODATE  page has up-to-date data
diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482
index 9210d6fa5024..299b91c7609f 100644
--- a/Documentation/w1/masters/ds2482
+++ b/Documentation/w1/masters/ds2482
@@ -24,8 +24,8 @@ General Remarks
 
 Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
 However, the device cannot be detected without writing to the i2c bus, so no
-detection is done.
-You should force the device address.
+detection is done. You should instantiate the device explicitly.
 
-$ modprobe ds2482 force=0,0x18
+$ modprobe ds2482
+$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
 
diff --git a/MAINTAINERS b/MAINTAINERS
index c450f3abb8c9..a1a2aceca5bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -65,43 +65,51 @@ trivial patch so apply some common sense.
 
 8.	Happy hacking.
 
-		-----------------------------------
-
-Maintainers List (try to look for most precise areas first)
+Descriptions of section entries:
+
+	P: Person (obsolete)
+	M: Mail patches to: FullName <address@domain>
+	L: Mailing list that is relevant to this area
+	W: Web-page with status/info
+	T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
+	S: Status, one of the following:
+	   Supported:	Someone is actually paid to look after this.
+	   Maintained:	Someone actually looks after it.
+	   Odd Fixes:	It has a maintainer but they don't have time to do
+			much other than throw the odd patch in. See below..
+	   Orphan:	No current maintainer [but maybe you could take the
+			role as you write your new code].
+	   Obsolete:	Old code. Something tagged obsolete generally means
+			it has been replaced by a better system and you
+			should be using that.
+	F: Files and directories with wildcard patterns.
+	   A trailing slash includes all files and subdirectory files.
+	   F:	drivers/net/	all files in and below drivers/net
+	   F:	drivers/net/*	all files in drivers/net, but not below
+	   F:	*/net/*		all files in "any top level directory"/net
+	   One pattern per line.  Multiple F: lines acceptable.
+	X: Files and directories that are NOT maintained, same rules as F:
+	   Files exclusions are tested before file matches.
+	   Can be useful for excluding a specific subdirectory, for instance:
+	   F:	net/
+	   X:	net/ipv6/
+	   matches all files in and below net excluding net/ipv6/
+	K: Keyword perl extended regex pattern to match content in a
+	   patch or file.  For instance:
+	   K: of_get_profile
+	      matches patches or files that contain "of_get_profile"
+	   K: \b(printk|pr_(info|err))\b
+	      matches patches or files that contain one or more of the words
+	      printk, pr_info or pr_err
+	   One regex pattern per line.  Multiple K: lines acceptable.
 
 Note: For the hard of thinking, this list is meant to remain in alphabetical
 order. If you could add yourselves to it in alphabetical order that would be
 so much easier [Ed]
 
-P: Person (obsolete)
-M: Mail patches to: FullName <address@domain>
-L: Mailing list that is relevant to this area
-W: Web-page with status/info
-T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
-S: Status, one of the following:
-
-	Supported:	Someone is actually paid to look after this.
-	Maintained:	Someone actually looks after it.
-	Odd Fixes:	It has a maintainer but they don't have time to do
-			much other than throw the odd patch in. See below..
-	Orphan:		No current maintainer [but maybe you could take the
-			role as you write your new code].
-	Obsolete:	Old code. Something tagged obsolete generally means
-			it has been replaced by a better system and you
-			should be using that.
+Maintainers List (try to look for most precise areas first)
 
-F: Files and directories with wildcard patterns.
-   A trailing slash includes all files and subdirectory files.
-	F:	drivers/net/	all files in and below drivers/net
-	F:	drivers/net/*	all files in drivers/net, but not below
-	F:	*/net/*		all files in "any top level directory"/net
-   One pattern per line.  Multiple F: lines acceptable.
-X: Files and directories that are NOT maintained, same rules as F:
-   Files exclusions are tested before file matches.
-   Can be useful for excluding a specific subdirectory, for instance:
-	F:	net/
-	X:	net/ipv6/
-   matches all files in and below net excluding net/ipv6/
+		-----------------------------------
 
 3C505 NETWORK DRIVER
 M:	Philip Blundell <philb@gnu.org>
@@ -257,6 +265,13 @@ W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/fan.c
 
+ACPI PROCESSOR AGGREGATOR DRIVER
+M:	Shaohua Li <shaohua.li@intel.com>
+L:	linux-acpi@vger.kernel.org
+W:	http://www.lesswatts.org/projects/acpi/
+S:	Supported
+F:	drivers/acpi/acpi_pad.c
+
 ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
@@ -570,6 +585,11 @@ M:	Mike Rapoport <mike@compulab.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/CONTEC MICRO9 MACHINE SUPPORT
+M:	Hubert Feurstein <hubert.feurstein@contec.at>
+S:	Maintained
+F:	arch/arm/mach-ep93xx/micro9.c
+
 ARM/CORGI MACHINE SUPPORT
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
@@ -646,24 +666,24 @@ ARM/INTEL IOP32X ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IOP33X ARM ARCHITECTURE
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IOP13XX ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IQ81342EX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IXP2000 ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -691,7 +711,7 @@ ARM/INTEL XSC3 (MANZANO) ARM CORE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -741,23 +761,36 @@ M:	Dirk Opfer <dirk@opfer-online.de>
 S:	Maintained
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
-P:	Marek Vasut
-M:	marek.vasut@gmail.com
+M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/palmtx.h
+F:	arch/arm/mach-pxa/palmtx.c
+F:	arch/arm/mach-pxa/include/mach/palmt5.h
+F:	arch/arm/mach-pxa/palmt5.c
+F:	arch/arm/mach-pxa/include/mach/palmld.h
+F:	arch/arm/mach-pxa/palmld.c
+F:	arch/arm/mach-pxa/include/mach/palmte2.h
+F:	arch/arm/mach-pxa/palmte2.c
+F:	arch/arm/mach-pxa/include/mach/palmtc.h
+F:	arch/arm/mach-pxa/palmtc.c
 
 ARM/PALM TREO 680 SUPPORT
 M:	Tomas Cech <sleep_walker@suse.cz>
 L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/treo680.h
+F:	arch/arm/mach-pxa/treo680.c
 
 ARM/PALMZ72 SUPPORT
 M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/palmz72.h
+F:	arch/arm/mach-pxa/palmz72.c
 
 ARM/PLEB SUPPORT
 M:	Peter Chubb <pleb@gelato.unsw.edu.au>
@@ -967,7 +1000,7 @@ F:	drivers/net/atlx/
 
 ATM
 M:	Chas Williams <chas@cmf.nrl.navy.mil>
-L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
+L:	linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
@@ -1211,6 +1244,13 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
+BROCADE BFA FC SCSI DRIVER
+P:      Jing Huang
+M:      huangj@brocade.com
+L:      linux-scsi@vger.kernel.org
+S:      Supported
+F:      drivers/scsi/bfa/
+
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
@@ -1448,6 +1488,7 @@ F:	mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
 M:	Rudolf Marek <r.marek@assembler.cz>
+M:	Huaxu Wan <huaxu.wan@intel.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/coretemp
@@ -2038,7 +2079,7 @@ S:	Maintained
 F:	fs/*
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-M:	Riku Voipio <riku.vipio@iki.fi>
+M:	Riku Voipio <riku.voipio@iki.fi>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/f75375s.c
@@ -2119,7 +2160,7 @@ S:	Supported
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
-FREESCALE USB PERIPHERIAL DRIVERS
+FREESCALE USB PERIPHERAL DRIVERS
 M:	Li Yang <leoli@freescale.com>
 L:	linux-usb@vger.kernel.org
 L:	linuxppc-dev@ozlabs.org
@@ -2170,18 +2211,6 @@ F:	Documentation/filesystems/caching/
 F:	fs/fscache/
 F:	include/linux/fscache*.h
 
-TRACING
-M:	Steven Rostedt <rostedt@goodmis.org>
-M:	Frederic Weisbecker <fweisbec@gmail.com>
-M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
-S:	Maintained
-F:	Documentation/trace/ftrace.txt
-F:	arch/*/*/*/ftrace.h
-F:	arch/*/kernel/ftrace.c
-F:	include/*/ftrace.h include/trace/ include/linux/trace*.h
-F:	kernel/trace/
-
 FUJITSU FR-V (FRV) PORT
 M:	David Howells <dhowells@redhat.com>
 S:	Maintained
@@ -2240,9 +2269,8 @@ S:	Maintained
 F:	include/asm-generic
 
 GENERIC UIO DRIVER FOR PCI DEVICES
-M:	Michael S. Tsirkin <mst@redhat.com>
+M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/uio/uio_pci_generic.c
 
@@ -2583,6 +2611,7 @@ L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
 S:	Maintained
+F:	Documentation/debugging-via-ohci1394.txt
 F:	drivers/ieee1394/
 
 IEEE 1394 RAW I/O DRIVER
@@ -2682,7 +2711,7 @@ F:	include/linux/intel-iommu.h
 
 INTEL IOP-ADMA DMA DRIVER
 M:	Dan Williams <dan.j.williams@intel.com>
-S:	Supported
+S:	Maintained
 F:	drivers/dma/iop-adma.c
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
@@ -2971,8 +3000,8 @@ F:	scripts/Makefile.*
 
 KERNEL JANITORS
 L:	kernel-janitors@vger.kernel.org
-W:	http://www.kerneljanitors.org/
-S:	Maintained
+W:	http://janitor.kernelnewbies.org/
+S:	Odd Fixes
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 M:	"J. Bruce Fields" <bfields@fieldses.org>
@@ -3623,10 +3652,18 @@ F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
+NETWORK DROP MONITOR
+M:	Neil Horman <nhorman@tuxdriver.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+W:	https://fedorahosted.org/dropwatch/
+F:	net/core/drop_monitor.c
+
 NETWORKING [GENERAL]
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
+W:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
@@ -3744,7 +3781,7 @@ F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
 OMAP SUPPORT
-M:	"Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
+M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 W:	http://www.muru.com/linux/omap/
 W:	http://linux.omap.com/
@@ -3849,6 +3886,15 @@ S:	Maintained
 F:	Documentation/i2c/busses/i2c-ocores
 F:	drivers/i2c/busses/i2c-ocores.c
 
+OPEN FIRMWARE AND FLATTENED DEVICE TREE
+M:	Grant Likely <grant.likely@secretlab.ca>
+L:	devicetree-discuss@lists.ozlabs.org
+W:	http://fdt.secretlab.ca
+S:	Maintained
+F:	drivers/of
+F:	include/linux/of*.h
+K:	of_get_property
+
 OPROFILE
 M:	Robert Richter <robert.richter@amd.com>
 L:	oprofile-list@lists.sf.net
@@ -3953,6 +3999,7 @@ F:	drivers/block/paride/
 PARISC ARCHITECTURE
 M:	Kyle McMartin <kyle@mcmartin.ca>
 M:	Helge Deller <deller@gmx.de>
+M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -4036,6 +4083,13 @@ M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 S:	Supported
+F:	kernel/perf_event.c
+F:	include/linux/perf_event.h
+F:	arch/*/*/kernel/perf_event.c
+F:	arch/*/include/asm/perf_event.h
+F:	arch/*/lib/perf_event.c
+F:	arch/*/kernel/perf_callchain.c
+F:	tools/perf/
 
 PERSONALITY HANDLING
 M:	Christoph Hellwig <hch@infradead.org>
@@ -4276,7 +4330,7 @@ F:	drivers/video/aty/aty128fb.c
 RALINK RT2X00 WIRELESS LAN DRIVER
 P:	rt2x00 project
 L:	linux-wireless@vger.kernel.org
-L:	users@rt2x00.serialmonkey.com
+L:	users@rt2x00.serialmonkey.com (moderated for non-subscribers)
 W:	http://rt2x00.serialmonkey.com/
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
@@ -4485,12 +4539,11 @@ F:	kernel/sched*
 F:	include/linux/sched.h
 
 SCORE ARCHITECTURE
-P:	Chen Liqin
-M:	liqin.chen@sunplusct.com
-P:	Lennox Wu
-M:	lennox.wu@gmail.com
+M:	Chen Liqin <liqin.chen@sunplusct.com>
+M:	Lennox Wu <lennox.wu@gmail.com>
 W:	http://www.sunplusct.com
 S:	Supported
+F:	arch/score/
 
 SCSI CDROM DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
@@ -4563,20 +4616,20 @@ S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S:     Orphan
-L:     linux-mmc@vger.kernel.org
-F:     drivers/mmc/host/sdhci.*
+S:	Orphan
+L:	linux-mmc@vger.kernel.org
+F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
 M:	Anton Vorontsov <avorontsov@ru.mvista.com>
 L:	linuxppc-dev@ozlabs.org
-L:     linux-mmc@vger.kernel.org
+L:	linux-mmc@vger.kernel.org
 S:	Maintained
-F:     drivers/mmc/host/sdhci-of.*
+F:	drivers/mmc/host/sdhci-of.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
 M:	Ben Dooks <ben-linux@fluff.org>
-L:     linux-mmc@vger.kernel.org
+L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/sdhci-s3c.c
 
@@ -4618,6 +4671,14 @@ F:	drivers/ata/
 F:	include/linux/ata.h
 F:	include/linux/libata.h
 
+SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
+P:     Jayamohan Kallickal
+M:     jayamohank@serverengines.com
+L:     linux-scsi@vger.kernel.org
+W:     http://www.serverengines.com
+S:     Supported
+F:     drivers/scsi/be2iscsi/
+
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
 M:	Sathya Perla <sathyap@serverengines.com>
 M:	Subbu Seetharaman <subbus@serverengines.com>
@@ -4671,8 +4732,7 @@ F:	drivers/usb/gadget/lh7a40*
 F:	drivers/usb/host/ohci-lh7a40*
 
 SIMPLE FIRMWARE INTERFACE (SFI)
-P:	Len Brown
-M:	lenb@kernel.org
+M:	Len Brown <lenb@kernel.org>
 L:	sfi-devel@simplefirmware.org
 W:	http://simplefirmware.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git
@@ -5120,6 +5180,20 @@ L:	tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/char/tpm/
 
+TRACING
+M:	Steven Rostedt <rostedt@goodmis.org>
+M:	Frederic Weisbecker <fweisbec@gmail.com>
+M:	Ingo Molnar <mingo@redhat.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
+S:	Maintained
+F:	Documentation/trace/ftrace.txt
+F:	arch/*/*/*/ftrace.h
+F:	arch/*/kernel/ftrace.c
+F:	include/*/ftrace.h
+F:	include/linux/trace*.h
+F:	include/trace/
+F:	kernel/trace/
+
 TRIVIAL PATCHES
 M:	Jiri Kosina <trivial@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
@@ -5608,6 +5682,13 @@ S:	Maintained
 F:	drivers/vlynq/vlynq.c
 F:	include/linux/vlynq.h
 
+VMWARE VMXNET3 ETHERNET DRIVER
+M:     Shreyas Bhatewara <sbhatewara@vmware.com>
+M:     VMware, Inc. <pv-drivers@vmware.com>
+L:     netdev@vger.kernel.org
+S:     Maintained
+F:     drivers/net/vmxnet3/
+
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
 M:	Liam Girdwood <lrg@slimlogic.co.uk>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
@@ -5679,8 +5760,7 @@ S:	Maintained
 F:	drivers/scsi/wd7000.c
 
 WINBOND CIR DRIVER
-P:	David Härdeman
-M:	david@hardeman.nu
+M:	David Härdeman <david@hardeman.nu>
 S:	Maintained
 F:	drivers/input/misc/winbond-cir.c
 
@@ -5737,9 +5817,7 @@ F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
 WOLFSON MICROELECTRONICS PMIC DRIVERS
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
-L:	linux-kernel@vger.kernel.org
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
 W:	http://opensource.wolfsonmicro.com/node/8
 S:	Supported
diff --git a/Makefile b/Makefile
index 00444a8e304f..9425d1de54c7 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -179,46 +179,9 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 # Alternatively CROSS_COMPILE can be set in the environment.
 # Default value for CROSS_COMPILE is not to prefix executables
 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-#
-# To force ARCH and CROSS_COMPILE settings include kernel.* files
-# in the kernel tree - do not patch this file.
 export KBUILD_BUILDHOST := $(SUBARCH)
-
-# Kbuild save the ARCH and CROSS_COMPILE setting in kernel.* files.
-# Restore these settings and check that user did not specify
-# conflicting values.
-
-saved_arch  := $(shell cat include/generated/kernel.arch  2> /dev/null)
-saved_cross := $(shell cat include/generated/kernel.cross 2> /dev/null)
-
-ifneq ($(CROSS_COMPILE),)
-        ifneq ($(saved_cross),)
-                ifneq ($(CROSS_COMPILE),$(saved_cross))
-                        $(error CROSS_COMPILE changed from \
-                                "$(saved_cross)" to \
-                                 to "$(CROSS_COMPILE)". \
-                                 Use "make mrproper" to fix it up)
-                endif
-        endif
-else
-    CROSS_COMPILE := $(saved_cross)
-endif
-
-ifneq ($(ARCH),)
-        ifneq ($(saved_arch),)
-                ifneq ($(saved_arch),$(ARCH))
-                        $(error ARCH changed from \
-                                "$(saved_arch)" to "$(ARCH)". \
-                                 Use "make mrproper" to fix it up)
-                endif
-        endif
-else
-        ifneq ($(saved_arch),)
-                ARCH := $(saved_arch)
-        else
-                ARCH := $(SUBARCH)
-        endif
-endif
+ARCH		?= $(SUBARCH)
+CROSS_COMPILE	?=
 
 # Architecture as present in compile.h
 UTS_MACHINE 	:= $(ARCH)
@@ -483,11 +446,6 @@ ifeq ($(config-targets),1)
 include $(srctree)/arch/$(SRCARCH)/Makefile
 export KBUILD_DEFCONFIG KBUILD_KCONFIG
 
-# save ARCH & CROSS_COMPILE settings
-$(shell mkdir -p include/generated &&                            \
-        echo $(ARCH)          > include/generated/kernel.arch && \
-        echo $(CROSS_COMPILE) > include/generated/kernel.cross)
-
 config: scripts_basic outputmakefile FORCE
 	$(Q)mkdir -p include/linux include/config
 	$(Q)$(MAKE) $(build)=scripts/kconfig $@
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index ef12794c3c68..8ba7044c554d 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -1032,6 +1032,7 @@ unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip);
 }
+EXPORT_SYMBOL(sa1111_pll_clock);
 
 /**
  *	sa1111_select_audio_mode - select I2S or AC link mode
@@ -1059,6 +1060,7 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_select_audio_mode);
 
 /**
  *	sa1111_set_audio_rate - set the audio sample rate
@@ -1083,6 +1085,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
 
 	return 0;
 }
+EXPORT_SYMBOL(sa1111_set_audio_rate);
 
 /**
  *	sa1111_get_audio_rate - get the audio sample rate
@@ -1100,6 +1103,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip) / (256 * div);
 }
+EXPORT_SYMBOL(sa1111_get_audio_rate);
 
 void sa1111_set_io_dir(struct sa1111_dev *sadev,
 		       unsigned int bits, unsigned int dir,
@@ -1128,6 +1132,7 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev,
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io_dir);
 
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1142,6 +1147,7 @@ void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 	MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io);
 
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1156,6 +1162,7 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_sleep_io);
 
 /*
  * Individual device operations.
@@ -1176,6 +1183,7 @@ void sa1111_enable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_enable_device);
 
 /**
  *	sa1111_disable_device - disable an on-chip SA1111 function block
@@ -1192,6 +1200,7 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_disable_device);
 
 /*
  *	SA1111 "Register Access Bus."
@@ -1259,17 +1268,20 @@ struct bus_type sa1111_bus_type = {
 	.suspend	= sa1111_bus_suspend,
 	.resume		= sa1111_bus_resume,
 };
+EXPORT_SYMBOL(sa1111_bus_type);
 
 int sa1111_driver_register(struct sa1111_driver *driver)
 {
 	driver->drv.bus = &sa1111_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_register);
 
 void sa1111_driver_unregister(struct sa1111_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_unregister);
 
 static int __init sa1111_init(void)
 {
@@ -1290,16 +1302,3 @@ module_exit(sa1111_exit);
 
 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
 MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sa1111_select_audio_mode);
-EXPORT_SYMBOL(sa1111_set_audio_rate);
-EXPORT_SYMBOL(sa1111_get_audio_rate);
-EXPORT_SYMBOL(sa1111_set_io_dir);
-EXPORT_SYMBOL(sa1111_set_io);
-EXPORT_SYMBOL(sa1111_set_sleep_io);
-EXPORT_SYMBOL(sa1111_enable_device);
-EXPORT_SYMBOL(sa1111_disable_device);
-EXPORT_SYMBOL(sa1111_pll_clock);
-EXPORT_SYMBOL(sa1111_bus_type);
-EXPORT_SYMBOL(sa1111_driver_register);
-EXPORT_SYMBOL(sa1111_driver_unregister);
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 1502957db2c3..f6aed7747d4d 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index eec488298267..ed2d59d01829 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,29 +1,26 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:27 2007
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 13:41:41 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,21 +37,39 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -67,29 +82,48 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +137,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -112,15 +147,15 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 CONFIG_ARCH_IOP33X=y
@@ -128,19 +163,26 @@ CONFIG_ARCH_IOP33X=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_IOP3XX_ATU=y
 
 #
 # IOP33x Implementation Options
@@ -151,14 +193,6 @@ CONFIG_IOP3XX_ATU=y
 #
 CONFIG_ARCH_IQ80331=y
 CONFIG_MACH_IQ80332=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_PLAT_IOP=y
 
 #
@@ -168,6 +202,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -178,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_ARM_THUMB is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 # CONFIG_IWMMXT is not set
 CONFIG_XSCALE_PMU=y
 
@@ -190,41 +224,55 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -239,6 +287,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -247,11 +297,7 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -264,6 +310,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -310,6 +357,7 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -317,6 +365,7 @@ CONFIG_IPV6=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -326,24 +375,31 @@ CONFIG_IPV6=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -357,7 +413,9 @@ CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -366,12 +424,14 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -421,9 +481,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -447,6 +505,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -463,14 +526,29 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -492,10 +570,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -512,6 +586,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -520,13 +596,18 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -543,15 +624,18 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
@@ -568,27 +652,34 @@ CONFIG_BLK_DEV_DM=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -596,23 +687,34 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -620,13 +722,16 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -670,10 +775,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -692,11 +800,12 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -705,16 +814,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -722,50 +829,82 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IOP3XX=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IOP3XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -773,13 +912,17 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -794,16 +937,23 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -812,28 +962,38 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -854,15 +1014,16 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -870,14 +1031,21 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
@@ -893,6 +1061,12 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -901,10 +1075,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
@@ -913,17 +1088,23 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -941,15 +1122,13 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -959,29 +1138,31 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1013,9 +1194,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1023,6 +1201,7 @@ CONFIG_INSTRUMENTATION=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1030,10 +1209,17 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1047,16 +1233,41 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1065,24 +1276,117 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=y
 CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 8da75dede52e..264f52b5c52d 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 357d4021e2d0..b3c8cce0f8fb 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -969,7 +969,6 @@ CONFIG_USB_ETH_RNDIS=y
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 7d61ae6e75da..953ba0297fc4 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 16 23:36:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 17 23:32:24 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -80,17 +81,15 @@ CONFIG_SHMEM=y
 # CONFIG_AIO is not set
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
 # CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
 
 #
 # All the settings below must match the bootloader's settings
@@ -207,7 +211,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
@@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -313,6 +321,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 CONFIG_MMC_ARMMMCI=y
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
 # CONFIG_RTC_DEBUG is not set
 
 #
@@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
 
 #
 # DMA Devices
 #
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -913,6 +947,7 @@ CONFIG_REGULATOR=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 63a481fbbed4..338ff19ae447 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res | mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res & ~mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res ^ mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c3b911ee9151..6aac3f5bb2f3 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *);
 extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
 
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
 #define USE_ELF_CORE_DUMP
 #define ELF_EXEC_PAGESIZE	4096
 
diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
index a0e39d5d00c9..234a3fc1c78e 100644
--- a/arch/arm/include/asm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -120,25 +120,39 @@
 #endif
 
 /*
- * Prefetch abort handler.  If the CPU has an IFAR use that, otherwise
- * use the address of the aborted instruction
+ *	Prefetch Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  legacy	- no IFSR, no IFAR
+ *	  v6		- ARMv6: IFSR, no IFAR
+ *	  v7		- ARMv7: IFSR and IFAR
  */
+
 #undef CPU_PABORT_HANDLER
 #undef MULTI_PABORT
 
-#ifdef CONFIG_CPU_PABRT_IFAR
+#ifdef CONFIG_CPU_PABRT_LEGACY
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER legacy_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V6
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mrc p15, 0, reg, cr6, cr0, 2
+#  define CPU_PABORT_HANDLER v6_pabort
 # endif
 #endif
 
-#ifdef CONFIG_CPU_PABRT_NOIFAR
+#ifdef CONFIG_CPU_PABRT_V7
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mov reg, insn
+#  define CPU_PABORT_HANDLER v7_pabort
 # endif
 #endif
 
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 4b8e7f559929..8d60ad267e3a 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -215,6 +215,7 @@ extern int iop3xx_get_init_atu(void);
  * IOP3XX I/O and Mem space regions for PCI autoconfiguration
  */
 #define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
 
 #define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
 #define IOP3XX_PCI_LOWER_IO_PA		0x90000000
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
new file mode 100644
index 000000000000..59303e200845
--- /dev/null
+++ b/arch/arm/include/asm/smp_plat.h
@@ -0,0 +1,16 @@
+/*
+ * ARM specific SMP header, this contains our implementation
+ * details.
+ */
+#ifndef __ASMARM_SMP_PLAT_H
+#define __ASMARM_SMP_PLAT_H
+
+#include <asm/cputype.h>
+
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
+#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a45ab5dd8255..c2f1605de359 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
+	if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
 		if (tlb_flag(TLB_V3_FULL))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
 		if (tlb_flag(TLB_V4_U_FULL))
@@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		if (tlb_flag(TLB_V4_I_FULL))
 			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
 	}
+	put_cpu();
 
 	if (tlb_flag(TLB_V6_U_ASID))
 		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 89f7eade20af..7020217fc49f 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -456,6 +456,7 @@
  * Unimplemented (or alternatively implemented) syscalls
  */
 #define __IGNORE_fadvise64_64		1
+#define __IGNORE_migrate_pages		1
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0a2ba51cf35d..0022b4d57f8b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -311,22 +311,16 @@ __pabt_svc:
 	tst	r3, #PSR_I_BIT
 	biceq	r9, r9, #PSR_I_BIT
 
-	@
-	@ set args, then call main handler
-	@
-	@  r0 - address of faulting instruction
-	@  r1 - pointer to registers on stack
-	@
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	msr	cpsr_c, r9			@ Maybe enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
 
 	@
@@ -614,33 +608,33 @@ call_fpe:
  THUMB(	add	pc, r8			)
 	nop
 
-	W(mov)	pc, lr				@ CP#0
+	movw_pc	lr				@ CP#0
 	W(b)	do_fpe				@ CP#1 (FPE)
 	W(b)	do_fpe				@ CP#2 (FPE)
-	W(mov)	pc, lr				@ CP#3
+	movw_pc	lr				@ CP#3
 #ifdef CONFIG_CRUNCH
 	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
 #else
-	W(mov)	pc, lr				@ CP#4
-	W(mov)	pc, lr				@ CP#5
-	W(mov)	pc, lr				@ CP#6
+	movw_pc	lr				@ CP#4
+	movw_pc	lr				@ CP#5
+	movw_pc	lr				@ CP#6
 #endif
-	W(mov)	pc, lr				@ CP#7
-	W(mov)	pc, lr				@ CP#8
-	W(mov)	pc, lr				@ CP#9
+	movw_pc	lr				@ CP#7
+	movw_pc	lr				@ CP#8
+	movw_pc	lr				@ CP#9
 #ifdef CONFIG_VFP
 	W(b)	do_vfp				@ CP#10 (VFP)
 	W(b)	do_vfp				@ CP#11 (VFP)
 #else
-	W(mov)	pc, lr				@ CP#10 (VFP)
-	W(mov)	pc, lr				@ CP#11 (VFP)
+	movw_pc	lr				@ CP#10 (VFP)
+	movw_pc	lr				@ CP#11 (VFP)
 #endif
-	W(mov)	pc, lr				@ CP#12
-	W(mov)	pc, lr				@ CP#13
-	W(mov)	pc, lr				@ CP#14 (Debug)
-	W(mov)	pc, lr				@ CP#15 (Control)
+	movw_pc	lr				@ CP#12
+	movw_pc	lr				@ CP#13
+	movw_pc	lr				@ CP#14 (Debug)
+	movw_pc	lr				@ CP#15 (Control)
 
 #ifdef CONFIG_NEON
 	.align	6
@@ -701,16 +695,16 @@ ENDPROC(__und_usr_unknown)
 __pabt_usr:
 	usr_entry
 
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	enable_irq				@ Enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
  UNWIND(.fnend		)
 	/* fall through */
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 807cfebb0f44..f0fe95b7085d 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -126,7 +126,7 @@ ENTRY(__gnu_mcount_nc)
 	cmp r0, r2
 	bne gnu_trace
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 gnu_trace:
 	ldr r1, [sp, #20]			@ lr of instrumented routine
@@ -135,7 +135,7 @@ gnu_trace:
 	mov lr, pc
 	mov pc, r2
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
@@ -425,13 +425,6 @@ sys_mmap2:
 #endif
 ENDPROC(sys_mmap2)
 
-ENTRY(pabort_ifar)
-		mrc	p15, 0, r0, cr6, cr0, 2
-ENTRY(pabort_noifar)
-		mov	pc, lr
-ENDPROC(pabort_ifar)
-ENDPROC(pabort_noifar)
-
 #ifdef CONFIG_OABI_COMPAT
 
 /*
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index ac34c0d9384b..7e9ed1eea40a 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -110,6 +110,13 @@
 	mov	\rd, sp, lsr #13
 	mov	\rd, \rd, lsl #13
 	.endm
+
+	@
+	@ 32-bit wide "mov pc, reg"
+	@
+	.macro	movw_pc, reg
+	mov	pc, \reg
+	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
 	clrex					@ clear the exclusive monitor
@@ -146,6 +153,14 @@
 	lsr	\rd, \rd, #13
 	mov	\rd, \rd, lsl #13
 	.endm
+
+	@
+	@ 32-bit wide "mov pc, reg"
+	@
+	.macro	movw_pc, reg
+	mov	pc, \reg
+	nop
+	.endm
 #endif	/* !CONFIG_THUMB2_KERNEL */
 
 /*
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 93ad576b2d74..885a7214418d 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -13,6 +13,7 @@
 
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
 
 	.align	2
 	.type	__switch_data, %object
@@ -251,7 +252,8 @@ __vet_atags:
 	bne	1f
 
 	ldr	r5, [r2, #0]			@ is first tag ATAG_CORE?
-	subs	r5, r5, #ATAG_CORE_SIZE
+	cmp	r5, #ATAG_CORE_SIZE
+	cmpne	r5, #ATAG_CORE_SIZE_EMPTY
 	bne	1f
 	ldr	r5, [r2, #4]
 	ldr	r6, =ATAG_CORE
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 790fbee92ec5..0d96d0171c05 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -328,6 +328,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 }
 
 /*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+	elf_core_copy_regs(elfregs, task_pt_regs(t));
+	return 1;
+}
+
+/*
  * fill in the fpe structure for a core dump...
  */
 int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index e0d32770bb3d..57162af53dc9 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -36,6 +36,7 @@
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
+#include <asm/smp_plat.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -153,7 +154,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpuexit __cpu_disable(void)
+int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct task_struct *p;
@@ -200,7 +201,7 @@ int __cpuexit __cpu_disable(void)
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpuexit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	if (!platform_cpu_kill(cpu))
 		printk("CPU%u: unable to kill\n", cpu);
@@ -214,7 +215,7 @@ void __cpuexit __cpu_die(unsigned int cpu)
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void __cpuexit cpu_die(void)
+void __ref cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
 
@@ -586,12 +587,6 @@ struct tlb_args {
 	unsigned long ta_end;
 };
 
-/* all SMP configurations have the extended CPUID registers */
-static inline int tlb_ops_need_broadcast(void)
-{
-	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
-}
-
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index d8c88c633c6f..a73a34dccf2a 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -166,10 +166,12 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clockevents_register_device(clk);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 /*
  * take a local timer down
  */
-void __cpuexit twd_timer_stop(void)
+void twd_timer_stop(void)
 {
 	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
 }
+#endif
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 4cdc4a0bd02d..d38cdf2c8276 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/timex.h>
 #include <linux/errno.h>
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 57eb0f6f6005..f838f36eb702 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	printk("[<%08lx>] ", where);
-	print_symbol("(%s) ", where);
-	printk("from [<%08lx>] ", from);
-	print_symbol("(%s)\n", from);
+	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+	sprint_symbol(sym1, where);
+	sprint_symbol(sym2, from);
+	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
 
 	if (in_exception_text(where))
-		dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
 #ifndef CONFIG_ARM_UNWIND
@@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top)
 {
-	unsigned long p = bottom & ~31;
+	unsigned long first;
 	mm_segment_t fs;
 	int i;
 
@@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+	printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
 
-	for (p = bottom & ~31; p < top;) {
-		printk("%04lx: ", p & 0xffff);
+	for (first = bottom & ~31; first < top; first += 32) {
+		unsigned long p;
+		char str[sizeof(" 12345678") * 8 + 1];
 
-		for (i = 0; i < 8; i++, p += 4) {
-			unsigned int val;
+		memset(str, ' ', sizeof(str));
+		str[sizeof(str) - 1] = '\0';
 
-			if (p < bottom || p >= top)
-				printk("         ");
-			else {
-				__get_user(val, (unsigned long *)p);
-				printk("%08x ", val);
+		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+			if (p >= bottom && p < top) {
+				unsigned long val;
+				if (__get_user(val, (unsigned long *)p) == 0)
+					sprintf(str + i * 9, " %08lx", val);
+				else
+					sprintf(str + i * 9, " ????????");
 			}
 		}
-		printk ("\n");
+		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
 	}
 
 	set_fs(fs);
 }
 
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
 	const int width = thumb ? 4 : 8;
 	mm_segment_t fs;
+	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
 	/*
@@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("Code: ");
 	for (i = -4; i < 1; i++) {
 		unsigned int val, bad;
 
@@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs)
 			bad = __get_user(val, &((u32 *)addr)[i]);
 
 		if (!bad)
-			printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+					width, val);
 		else {
-			printk("bad PC value.");
+			p += sprintf(p, "bad PC value");
 			break;
 		}
 	}
-	printk("\n");
+	printk("%sCode: %s\n", lvl, str);
 
 	set_fs(fs);
 }
@@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
 	struct task_struct *tsk = thread->task;
 	static int die_counter;
 
-	printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
 	       str, err, ++die_counter);
+	sysfs_printk_last_file();
 	print_modules();
 	__show_regs(regs);
-	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-		tsk->comm, task_pid_nr(tsk), thread + 1);
+	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
 
 	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->ARM_sp,
+		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
 			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
 		dump_backtrace(regs, tsk);
-		dump_instr(regs);
+		dump_instr(KERN_EMERG, regs);
 	}
 }
 
@@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 
 	oops_enter();
 
-	console_verbose();
 	spin_lock_irq(&die_lock);
+	console_verbose();
 	bust_spinlocks(1);
 	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
+	oops_exit();
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
@@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
-	oops_exit();
 	do_exit(SIGSEGV);
 }
 
@@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
-		dump_instr(regs);
+		dump_instr(KERN_INFO, regs);
 	}
 #endif
 
@@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
 			task_pid_nr(current), current->comm, n);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 	}
 #endif
 
@@ -418,12 +424,14 @@ static int bad_syscall(int n, struct pt_regs *regs)
 static inline void
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {
+	struct mm_struct *mm = current->active_mm;
 	struct vm_area_struct *vma;
 
 	if (end < start || flags)
 		return;
 
-	vma = find_vma(current->active_mm, start);
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, start);
 	if (vma && vma->vm_start < end) {
 		if (start < vma->vm_start)
 			start = vma->vm_start;
@@ -432,6 +440,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 
 		flush_cache_user_range(vma, start, end);
 	}
+	up_read(&mm->mmap_sem);
 }
 
 /*
@@ -576,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk("[%d] %s: arm syscall %d\n",
 		       task_pid_nr(current), current->comm, no);
-		dump_instr(regs);
+		dump_instr("", regs);
 		if (user_mode(regs)) {
 			__show_regs(regs);
 			c_backtrace(regs->ARM_fp, processor_mode(regs));
@@ -653,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	if (user_debug & UDBG_BADABORT) {
 		printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
 			task_pid_nr(current), current->comm, code, instr);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 		show_pte(current->mm, addr);
 	}
 #endif
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d581cff80c4c..332b784050b2 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9g45_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 492c649f451e..e590bbe0a7b4 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -31,7 +31,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <linux/amba/bus.h>
 #include <mach/csp/mm_addr.h>
 #include <mach/hardware.h>
 #include <asm/clkdev.h>
@@ -45,7 +44,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include <cfg_global.h>
 
@@ -273,12 +271,12 @@ static struct irqaction bcmring_timer_irq = {
 	.handler = bcmring_timer_interrupt,
 };
 
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
 {
 	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
 }
 
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
 {
 	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
index cdbf93c694a6..38b37060d426 100644
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -29,7 +29,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
 
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index a1d5e7dac741..52dd8046b305 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -35,7 +35,6 @@
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
-#include <mach/common.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
 
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index d7291c682a64..9167c3d2a5ed 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "0x00000000 - SDCE3/SyncBoot"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0x00000000
+	  first SDRAM bank at 0x00000000.
 
 config EP93XX_SDCE0_PHYS_OFFSET
 	bool "0xc0000000 - SDCEO"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xc0000000
+	  first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+	bool "0xd0000000 - SDCE1"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+	bool "0xe0000000 - SDCE2"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	bool "0xf0000000 - SDCE3/AsyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xf0000000.
 
 endchoice
 
@@ -112,28 +130,36 @@ config MACH_MICRO9
 	bool
 
 config MACH_MICRO9H
-	bool "Support Contec Hypercontrol Micro9-H"
+	bool "Support Contec Micro9-High"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-H board.
+	  Contec Micro9-High board.
 
 config MACH_MICRO9M
-	bool "Support Contec Hypercontrol Micro9-M"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "Support Contec Micro9-Mid"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-M board.
+	  Contec Micro9-Mid board.
 
 config MACH_MICRO9L
-	bool "Support Contec Hypercontrol Micro9-L"
+	bool "Support Contec Micro9-Lite"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-L board.
+	  Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+	bool "Support Contec Micro9-Slim"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Micro9-Slim board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index 27a085a8f12a..0ad33f15c622 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
 
    zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index dda19cd76194..1d0f9d8aff2e 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,13 +16,16 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
 
 #include <asm/clkdev.h>
 #include <asm/div64.h>
-#include <mach/hardware.h>
 
 
 struct clk {
+	struct clk	*parent;
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
@@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk);
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
 
+
+static struct clk clk_xtali = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_uart1 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+	.parent		= &clk_xtali,
+};
+static struct clk clk_f = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_h = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_p = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_pll2 = {
+	.parent		= &clk_xtali,
+};
 static struct clk clk_usb_host = {
+	.parent		= &clk_pll2,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 static struct clk clk_keypad = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
 static struct clk clk_pwm = {
+	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
 };
 
@@ -85,50 +108,62 @@ static struct clk clk_video = {
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
@@ -137,6 +172,7 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
+	INIT_CK(NULL,			"xtali",	&clk_xtali),
 	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
 	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
 	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
@@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk->users++) {
+		if (clk->parent)
+			__clk_enable(clk->parent);
+
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v |= clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
+	}
+}
 
 int clk_enable(struct clk *clk)
 {
-	if (!clk->users++ && clk->enable_reg) {
-		u32 value;
+	unsigned long flags;
 
-		value = __raw_readl(clk->enable_reg);
-		value |= clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
-	}
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
 
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
-void clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
-	if (!--clk->users && clk->enable_reg) {
-		u32 value;
+	if (!--clk->users) {
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v &= ~clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
 
-		value = __raw_readl(clk->enable_reg);
-		value &= ~clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
+		if (clk->parent)
+			__clk_disable(clk->parent);
 	}
 }
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
 EXPORT_SYMBOL(clk_disable);
 
 static unsigned long get_uart_rate(struct clk *clk)
 {
+	unsigned long rate = clk_get_rate(clk->parent);
 	u32 value;
 
 	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
 	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		return EP93XX_EXT_CLK_RATE;
+		return rate;
 	else
-		return EP93XX_EXT_CLK_RATE / 2;
+		return rate / 2;
 }
 
 unsigned long clk_get_rate(struct clk *clk)
@@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
-				  int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+			int *psel, int *esel, int *pdiv, int *div)
 {
-	unsigned long max_rate, best_rate = 0,
-		actual_rate = 0, mclk_rate = 0, rate_err = -1;
+	struct clk *mclk;
+	unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
 	int i, found = 0, __div = 0, __pdiv = 0;
 
 	/* Don't exceed the maximum rate */
 	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
-		       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+		       clk_xtali.rate / 4);
 	rate = min(rate, max_rate);
 
 	/*
@@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	 */
 	for (i = 0; i < 3; i++) {
 		if (i == 0)
-			mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+			mclk = &clk_xtali;
 		else if (i == 1)
-			mclk_rate = clk_pll1.rate * 2;
-		else if (i == 2)
-			mclk_rate = clk_pll2.rate * 2;
+			mclk = &clk_pll1;
+		else
+			mclk = &clk_pll2;
+		mclk_rate = mclk->rate * 2;
 
 		/* Try each predivider value */
 		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 				*div = __div;
 				*psel = (i == 2);
 				*esel = (i != 0);
-				best_rate = actual_rate;
+				clk->parent = mclk;
+				clk->rate = actual_rate;
 				rate_err = abs(actual_rate - rate);
 				found = 1;
 			}
@@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	}
 
 	if (!found)
-		return 0;
+		return -EINVAL;
 
-	return best_rate;
+	return 0;
 }
 
 static int set_div_rate(struct clk *clk, unsigned long rate)
 {
-	unsigned long actual_rate;
-	int psel = 0, esel = 0, pdiv = 0, div = 0;
+	int err, psel = 0, esel = 0, pdiv = 0, div = 0;
 	u32 val;
 
-	actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
-	if (actual_rate == 0)
-		return -EINVAL;
-	clk->rate = actual_rate;
+	err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+	if (err)
+		return err;
 
 	/* Clear the esel, psel, pdiv and div bits */
 	val = __raw_readl(clk->enable_reg);
@@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = EP93XX_EXT_CLK_RATE;
+	rate = clk_xtali.rate;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll1.rate = clk_xtali.rate;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll2.rate = clk_xtali.rate;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f7ebed942f66..b4357c388d2e 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 	for (i = 0; i < 8; i++) {
 		if (status & (1 << i)) {
 			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
-			desc = irq_desc + gpio_irq;
 			generic_handle_irq(gpio_irq);
 		}
 	}
@@ -550,13 +549,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 	platform_device_register(&ep93xx_eth_device);
 }
 
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
 	.name			= "i2c-gpio",
@@ -564,8 +561,25 @@ static struct platform_device ep93xx_i2c_device = {
 	.dev.platform_data	= &ep93xx_i2c_data,
 };
 
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+				struct i2c_board_info *devices, int num)
 {
+	/*
+	 * Set the EEPROM interface pin drive type control.
+	 * Defines the driver type for the EECLK and EEDAT pins as either
+	 * open drain, which will require an external pull-up, or a normal
+	 * CMOS driver.
+	 */
+	if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+		pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+	if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+		pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+	__raw_writel((data->sda_is_open_drain << 1) |
+		     (data->scl_is_open_drain << 0),
+		     EP93XX_GPIO_EEDRIVE);
+
+	ep93xx_i2c_data = *data;
 	i2c_register_board_info(0, devices, num);
 	platform_device_register(&ep93xx_i2c_device);
 }
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 73145ae5d3fa..a4a7be308000 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,8 +27,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
 
@@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
 	.phy_id		= 1,
 };
 
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+	.scl_is_open_drain	= 0,
+	.udelay			= 0,	/* default to 100 kHz */
+	.timeout		= 0,	/* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ds1337", 0x68),
 	},
@@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void)
 {
 	if (machine_is_edb9302a() || machine_is_edb9307a() ||
 	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(edb93xxa_i2c_data,
-				ARRAY_SIZE(edb93xxa_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+				    edb93xxa_i2c_board_info,
+				    ARRAY_SIZE(edb93xxa_i2c_board_info));
 	} else if (machine_is_edb9307() || machine_is_edb9312() ||
 		   machine_is_edb9315()) {
-		ep93xx_register_i2c(edb93xx_i2c_data,
-				ARRAY_SIZE(edb93xx_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+				    edb93xx_i2c_board_info,
+				    ARRAY_SIZE(edb93xx_i2c_board_info));
 	}
 }
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 0fbf87b16338..b1f937eda29c 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,25 +52,27 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_PHYS(x)		(EP93XX_AHB_PHYS_BASE + (x))
 #define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
 
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
 #define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
 
 
 /* AHB peripherals */
 #define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
 #define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
 #define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
 #define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
@@ -112,21 +114,10 @@
 
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
 #define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
 #define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
@@ -134,13 +125,13 @@
 
 #define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
 #define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE		EP93XX_APB_PHYS(0x000d0000)
 #define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
@@ -148,10 +139,10 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
 #define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
 #define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
@@ -218,6 +209,17 @@
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
+#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index 0a1498ae899a..c991b149bdf2 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
  *          B0..B7  (7..15) to irq 72..79, and
  *          F0..F7 (16..24) to irq 80..87.
  */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-		return 64 + gpio;
-
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - gpio_to_irq(0);
-}
+#define gpio_to_irq(gpio)	\
+	(((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
+
+#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 925b12ea0990..554064e90307 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -9,6 +9,12 @@
 #define PHYS_OFFSET		UL(0x00000000)
 #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xf0000000)
 #else
 #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 01a0f0838e5b..469fd968d517 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,6 +4,7 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
@@ -16,7 +17,6 @@ struct ep93xx_eth_data
 
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
 
 /* EP93xx System Controller software locked register write */
 void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
@@ -33,7 +33,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 }
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+			 struct i2c_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 0a313e82fb74..d83b80478b09 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -2,7 +2,9 @@
  *  linux/arch/arm/mach-ep93xx/micro9.c
  *
  * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                   Manfred Gruber <manfred.gruber@contec.at>
+ *                    Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ *                    Hubert Feurstein <hubert.feurstein@contec.at>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,104 +22,124 @@
 #include <asm/mach/arch.h>
 
 
-static struct ep93xx_eth_data micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
-
-static void __init micro9_init(void)
-{
-	ep93xx_register_eth(&micro9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
-	.width		= 4,
-};
-
-static struct resource micro9h_flash_resource = {
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
+
+static struct resource micro9_flash_resource = {
 	.start		= EP93XX_CS1_PHYS_BASE,
 	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &micro9h_flash_data,
+		.platform_data	= &micro9_flash_data,
 	},
 	.num_resources	= 1,
-	.resource	= &micro9h_flash_resource,
+	.resource	= &micro9_flash_resource,
 };
 
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
+{
+	micro9_flash_data.width = width;
+
+	platform_device_register(&micro9_flash);
+}
+
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+	u32 v;
+
+	/* Detect the bus width of the external flash memory */
+	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+		return 4; /* 32-bit */
+	else
+		return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
 {
-	platform_device_register(&micro9h_flash);
+	if (machine_is_micro9())
+		__micro9_register_flash(4);
+	else if (machine_is_micro9m() || machine_is_micro9s())
+		__micro9_register_flash(micro9_detect_bootwidth());
 }
 
-static void __init micro9h_init_machine(void)
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+	.phy_id		= 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
 {
 	ep93xx_init_devices();
-	micro9_init();
-	micro9h_init();
+	ep93xx_register_eth(&micro9_eth_data, 1);
+	micro9_register_flash();
 }
 
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9h_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-M
- */
 #ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9m_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-L
- */
 #ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9l_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index f1d72b225450..148d25fc636f 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/signal.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
 #include <asm/irq_regs.h>
@@ -486,7 +487,7 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 	return ret;
 }
 
-struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
 }
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index abd9eb49f103..941f363aca56 100644
--- a/arch/arm/mach-iop32x/include/mach/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -31,7 +31,5 @@
 #define IOP32X_MAX_RAM_SIZE            0x40000000UL
 #define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
 
 #endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index 24567316ec88..a89c0a234bff 100644
--- a/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -36,8 +36,6 @@
 #define IOP33X_MAX_RAM_SIZE		0x80000000UL
 #define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
 
 
 #endif
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 4089951acb47..ff5e33298914 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
 	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
-	_REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
-	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
@@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index ee65dda584cf..906d59b0a7aa 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -23,6 +23,10 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,6 +39,7 @@
 #include <mach/iomux.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -78,8 +83,6 @@ static int pcm038_pins[] = {
 	PC6_PF_I2C2_SCL,
 	/* SPI1 */
 	PD25_PF_CSPI1_RDY,
-	PD27_PF_CSPI1_SS1,
-	PD28_PF_CSPI1_SS0,
 	PD29_PF_CSPI1_SCLK,
 	PD30_PF_CSPI1_MISO,
 	PD31_PF_CSPI1_MOSI,
@@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 	}
 };
 
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+	.chipselect = pcm038_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+	{
+		.dev	= &mxc_sdhc_device1.dev,
+		.supply	= "sdhc_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc1_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+	.consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= NULL,
+		.supply	= "imx_cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_data,
+	}, {
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc1_data,
+	},
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+	.regulators = pcm038_regulators,
+	.num_regulators = ARRAY_SIZE(pcm038_regulators),
+	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+		 MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IRQ_GPIOB(23),
+		.max_speed_hz = 300000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = &pcm038_pmic,
+		.mode = SPI_CS_HIGH,
+	}
+};
+
 static void __init pcm038_init(void)
 {
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -219,6 +302,15 @@ static void __init pcm038_init(void)
 	/* PE18 for user-LED D40 */
 	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
 
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+	/* MC13783 IRQ */
+	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+	spi_register_board_info(pcm038_spi_board_info,
+				ARRAY_SIZE(pcm038_spi_board_info));
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index c261f59b0b4c..3cb7f457e5d0 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -39,7 +39,6 @@ static int pcm970_pins[] = {
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
-	GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
 	/* display */
 	PA5_PF_LSCLK,
 	PA6_PF_LD0,
@@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void)
 			"PCM970");
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 	platform_device_register(&pcm970_sja1000);
 }
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index eb12de1da42d..63511de3a559 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -1,4 +1,23 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <mach/mx25.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 92aa4fd19d99..d23ae571c03f 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -1,3 +1,21 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
 static void __init mx25pdk_init(void)
 {
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
-	mxc_register_device(&mxc_nand_device, &nand_board_info);
 }
 
-
 static void __init mx25pdk_timer_init(void)
 {
 	mx25_clocks_init(26000000);
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index fe5c4217322e..c595260ec1f9 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "admux", admux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 06bd6180bfc3..b2a3bcf8266e 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 8a577f367250..e6abe181b967 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = {
  * SPI master controller
  * 3 channels
  */
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
 	{
 	       .start = CSPI1_BASE_ADDR,
 	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
@@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = {
 	},
 };
 
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
 	{
 		.start = CSPI2_BASE_ADDR,
 		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
@@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = {
 	},
 };
 
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
 	{
 		.start = CSPI3_BASE_ADDR,
 		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
@@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = {
 	},
 };
 
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
 	.name = "spi_imx",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_spi_0_resources),
-	.resource = imx_spi_0_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_0_resources),
+	.resource = mxc_spi_0_resources,
 };
 
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
 	.name = "spi_imx",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_spi_1_resources),
-	.resource = imx_spi_1_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_1_resources),
+	.resource = mxc_spi_1_resources,
 };
 
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
 	.name = "spi_imx",
 	.id = 2,
-	.num_resources = ARRAY_SIZE(imx_spi_2_resources),
-	.resource = imx_spi_2_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_2_resources),
+	.resource = mxc_spi_2_resources,
 };
 
 #ifdef CONFIG_ARCH_MX35
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 79f2be45d139..ab87419dc9a0 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
-extern struct platform_device imx_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index ad5a1122d765..bedf5b8d976a 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -81,6 +81,7 @@ void __init mx31_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+#ifdef CONFIG_ARCH_MX35
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
@@ -89,6 +90,7 @@ void __init mx35_map_io(void)
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+#endif
 
 void __init mx31_init_irq(void)
 {
diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
index 44ed20d4a388..cf81cbc57544 100644
--- a/arch/arm/mach-ns9xxx/clock.c
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -195,7 +195,7 @@ static int clk_debugfs_open(struct inode *inode, struct file *file)
 	return single_open(file, clk_debugfs_show, NULL);
 }
 
-static struct file_operations clk_debugfs_operations = {
+static const struct file_operations clk_debugfs_operations = {
 	.open = clk_debugfs_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 42920f9c1a11..8ad5cc3e83e3 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = {
 
 static void __init ams_delta_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 
 	omap_board_config = ams_delta_config;
@@ -231,6 +235,8 @@ static void __init ams_delta_init(void)
 
 	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index fb47239da72f..6c8a41f20e51 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -64,6 +64,14 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
 		omap_usb_init(&generic1510_usb_config);
 	}
 #endif
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cc2abbb2d0f4..cd6c39514826 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -376,6 +376,26 @@ static void __init innovator_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
+		unsigned char reg;
+
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM1_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM2_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 		spi_register_board_info(innovator1510_boardinfo,
 				ARRAY_SIZE(innovator1510_boardinfo));
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 90dd0431b0dc..4de258420f39 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void)
 
 static void __init omap_palmte_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	omap_board_config = palmte_config;
 	omap_board_config_size = ARRAY_SIZE(palmte_config);
 
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8256139891ff..d972cf941b76 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) {
 
 static void __init omap_palmtt_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	omap_mpu_wdt_mode(0);
 
 	omap_board_config = palmtt_config;
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 81b6bde1c5a3..986bd4df0e97 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -307,6 +307,14 @@ palmz71_gpio_setup(int early)
 static void __init
 omap_palmz71_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	palmz71_gpio_setup(1);
 	omap_mpu_wdt_mode(0);
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 02c85ca2e1df..056ae64e0f55 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = {
 
 static void __init omap_sx1_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
 
 	omap_board_config = sx1_config;
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index c06e7a553472..07b07522d5bf 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void)
 
 static void __init voiceblue_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	/* Watchdog */
 	gpio_request(0, "Watchdog");
 	/* smc91x reset */
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 4ef26faf083e..e5dcdf764c91 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -38,7 +38,7 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
-	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
+	{ .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index d496e50fec40..d23979bc0fd5 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -131,8 +131,6 @@ void __init omap_serial_init(void)
 	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		unsigned char reg;
-
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
@@ -143,16 +141,6 @@ void __init omap_serial_init(void)
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart1_ck, 12000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART1_TX);
-				omap_cfg_reg(UART1_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM1_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
 			break;
 		case 1:
 			uart2_ck = clk_get(NULL, "uart2_ck");
@@ -165,16 +153,6 @@ void __init omap_serial_init(void)
 				else
 					clk_set_rate(uart2_ck, 48000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART2_TX);
-				omap_cfg_reg(UART2_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM2_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
 			break;
 		case 2:
 			uart3_ck = clk_get(NULL, "uart3_ck");
@@ -185,10 +163,6 @@ void __init omap_serial_init(void)
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart3_ck, 12000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART3_TX);
-				omap_cfg_reg(UART3_RX);
-			}
 			break;
 		}
 		omap_serial_reset(&serial_platform_data[i]);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 75b1c7efae7e..aad194f61a33 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_NOKIA_N800
+       bool
+
+config MACH_NOKIA_N810
+       bool
+
+config MACH_NOKIA_N810_WIMAX
+       bool
+
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on ARCH_OMAP2420
+	select MACH_NOKIA_N800
+	select MACH_NOKIA_N810
+	select MACH_NOKIA_N810_WIMAX
 
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd57ec76dc5e..0acb5560229c 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
@@ -38,7 +39,6 @@
 #include <mach/gpmc.h>
 
 #include <mach/control.h>
-#include <mach/keypad.h>
 #include <mach/gpmc-smc91x.h>
 
 #include "sdram-qimonda-hyb18m512160af-6.h"
@@ -54,7 +54,7 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static int sdp3430_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -88,11 +88,15 @@ static int sdp3430_keymap[] = {
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data sdp3430_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 5,
 	.cols		= 6,
-	.keymap		= sdp3430_keymap,
-	.keymapsize	= ARRAY_SIZE(sdp3430_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index eb37c40ea83a..609a5a4a7e29 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -58,6 +58,8 @@ static void __init gic_init_irq(void)
 
 static void __init omap_4430sdp_init_irq(void)
 {
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
@@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void)
 static void __init omap_4430sdp_init(void)
 {
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-	omap_board_config = sdp4430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ec6854cbdd9f..d57ec2f4d0a9 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
@@ -41,7 +42,6 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
@@ -80,7 +80,7 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static int ldp_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
 	KEY(2, 0, KEY_3),
@@ -101,11 +101,15 @@ static int ldp_twl4030_keymap[] = {
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 6,
 	.cols		= 6,
-	.keymap		= ldp_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 500c9956876d..70df6b4dbcd4 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -139,8 +139,13 @@ static struct gpio_led gpio_leds[];
 static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+		omap_cfg_reg(AG9_34XX_GPIO23);
+		mmc[0].gpio_wp = 23;
+	} else {
+		omap_cfg_reg(AH8_34XX_GPIO29);
+	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_cfg_reg(AH8_34XX_GPIO29);
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d50b9be90580..4c4d7f8dbd72 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
 
 #include <linux/spi/spi.h>
@@ -37,7 +38,6 @@
 #include <mach/usb.h>
 #include <mach/common.h>
 #include <mach/mcspi.h>
-#include <mach/keypad.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
@@ -159,7 +159,7 @@ static struct twl4030_usb_data omap3evm_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static int omap3evm_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -178,11 +178,15 @@ static int omap3evm_keymap[] = {
 	KEY(3, 3, KEY_P)
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data omap3evm_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 4,
 	.cols		= 4,
-	.keymap		= omap3evm_keymap,
-	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b43f6e36b6d9..5326e0d61597 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -27,6 +27,7 @@
 #include <linux/i2c/twl4030.h>
 #include <linux/leds.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
@@ -39,7 +40,6 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 #include <mach/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -133,7 +133,7 @@ static void __init pandora_keys_gpio_init(void)
 	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
 }
 
-static int pandora_keypad_map[] = {
+static int board_keymap[] = {
 	/* col, row, code */
 	KEY(0, 0, KEY_9),
 	KEY(0, 1, KEY_0),
@@ -180,11 +180,15 @@ static int pandora_keypad_map[] = {
 	KEY(5, 2, KEY_FN),
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data pandora_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 6,
-	.keymap		= pandora_keypad_map,
-	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e6e8290b7828..e34d96a825e3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
@@ -27,7 +28,6 @@
 #include <mach/common.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
-#include <mach/keypad.h>
 #include <mach/onenand.h>
 #include <mach/gpmc-smc91x.h>
 
@@ -36,58 +36,62 @@
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
 
-static int rx51_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
-	KEY(0, 1, KEY_W),
-	KEY(0, 2, KEY_E),
-	KEY(0, 3, KEY_R),
-	KEY(0, 4, KEY_T),
-	KEY(0, 5, KEY_Y),
-	KEY(0, 6, KEY_U),
-	KEY(0, 7, KEY_I),
-	KEY(1, 0, KEY_O),
+	KEY(0, 1, KEY_O),
+	KEY(0, 2, KEY_P),
+	KEY(0, 3, KEY_COMMA),
+	KEY(0, 4, KEY_BACKSPACE),
+	KEY(0, 6, KEY_A),
+	KEY(0, 7, KEY_S),
+	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
-	KEY(1, 2, KEY_DOT),
-	KEY(1, 3, KEY_V),
-	KEY(1, 4, KEY_DOWN),
-	KEY(2, 0, KEY_P),
-	KEY(2, 1, KEY_F),
+	KEY(1, 2, KEY_F),
+	KEY(1, 3, KEY_G),
+	KEY(1, 4, KEY_H),
+	KEY(1, 5, KEY_J),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_L),
+	KEY(2, 0, KEY_E),
+	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_B),
-	KEY(2, 4, KEY_RIGHT),
-	KEY(3, 0, KEY_COMMA),
-	KEY(3, 1, KEY_G),
-	KEY(3, 2, KEY_ENTER),
+	KEY(2, 3, KEY_ENTER),
+	KEY(2, 5, KEY_Z),
+	KEY(2, 6, KEY_X),
+	KEY(2, 7, KEY_C),
+	KEY(3, 0, KEY_R),
+	KEY(3, 1, KEY_V),
+	KEY(3, 2, KEY_B),
 	KEY(3, 3, KEY_N),
-	KEY(4, 0, KEY_BACKSPACE),
-	KEY(4, 1, KEY_H),
-	KEY(4, 3, KEY_M),
+	KEY(3, 4, KEY_M),
+	KEY(3, 5, KEY_SPACE),
+	KEY(3, 6, KEY_SPACE),
+	KEY(3, 7, KEY_LEFT),
+	KEY(4, 0, KEY_T),
+	KEY(4, 1, KEY_DOWN),
+	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
-	KEY(5, 1, KEY_J),
-	KEY(5, 2, KEY_Z),
-	KEY(5, 3, KEY_SPACE),
-	KEY(5, 4, KEY_LEFTSHIFT),
-	KEY(6, 0, KEY_A),
-	KEY(6, 1, KEY_K),
-	KEY(6, 2, KEY_X),
-	KEY(6, 3, KEY_SPACE),
-	KEY(6, 4, KEY_FN),
-	KEY(7, 0, KEY_S),
-	KEY(7, 1, KEY_L),
-	KEY(7, 2, KEY_C),
-	KEY(7, 3, KEY_LEFT),
-	KEY(0xff, 0, KEY_F6),
-	KEY(0xff, 1, KEY_F7),
-	KEY(0xff, 2, KEY_F8),
-	KEY(0xff, 4, KEY_F9),
-	KEY(0xff, 5, KEY_F10),
+	KEY(4, 5, KEY_RIGHTALT),
+	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(5, 0, KEY_Y),
+	KEY(6, 0, KEY_U),
+	KEY(7, 0, KEY_I),
+	KEY(7, 1, KEY_F7),
+	KEY(7, 2, KEY_F8),
+	KEY(0xff, 2, KEY_F9),
+	KEY(0xff, 4, KEY_F10),
+	KEY(0xff, 5, KEY_F11),
+};
+
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
 };
 
 static struct twl4030_keypad_data rx51_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= rx51_keymap,
-	.keymapsize	= ARRAY_SIZE(rx51_keymap),
 	.rep		= 1,
 };
 
@@ -440,7 +444,7 @@ static int __init rx51_i2c_init(void)
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
 		rx51_twldata.vmmc2 = &rx51_vmmc2;
 	}
-	omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
+	omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
 			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
 	omap_register_i2c_bus(2, 100, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index f9196c3b1a7b..78869a9a1cc2 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -26,7 +26,6 @@
 #include <mach/mux.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 324009edbd53..ea00486a5e53 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/regulator/machine.h>
@@ -22,12 +23,12 @@
 
 #include <mach/common.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
 
 /* Zoom2 has Qwerty keyboard*/
-static int zoom2_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_E),
 	KEY(1, 0, KEY_R),
 	KEY(2, 0, KEY_T),
@@ -82,11 +83,15 @@ static int zoom2_twl4030_keymap[] = {
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= zoom2_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
 	.rep		= 1,
 };
 
@@ -209,7 +214,8 @@ static void __init omap_zoom2_init_irq(void)
 {
 	omap_board_config = zoom2_config;
 	omap_board_config_size = ARRAY_SIZE(zoom2_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+				 mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index bc5d3ac66611..e2dbedd581e8 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -769,6 +769,7 @@ int __init omap2_clk_init(void)
 		if (c->cpu & cpu_mask) {
 			clkdev_add(&c->lk);
 			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
 		}
 
 	/* Check the MPU rate set by bootloader */
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index fafcd32e6907..489556eecbd1 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -338,6 +338,13 @@ static struct omap_clk omap34xx_clks[] = {
  */
 #define SDRC_MPURATE_LOOPS		96
 
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST		120000000
+
 /**
  * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
  * @clk: struct clk * being enabled
@@ -1056,6 +1063,28 @@ void omap2_clk_prepare_for_reboot(void)
 #endif
 }
 
+static void omap3_clk_lock_dpll5(void)
+{
+	struct clk *dpll5_clk;
+	struct clk *dpll5_m2_clk;
+
+	dpll5_clk = clk_get(NULL, "dpll5_ck");
+	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+	clk_enable(dpll5_clk);
+
+	/* Enable autoidle to allow it to enter low power bypass */
+	omap3_dpll_allow_idle(dpll5_clk);
+
+	/* Program dpll5_m2_clk divider for no division */
+	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+	clk_enable(dpll5_m2_clk);
+	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+	clk_disable(dpll5_m2_clk);
+	clk_disable(dpll5_clk);
+	return;
+}
+
 /* REVISIT: Move this init stuff out into clock.c */
 
 /*
@@ -1148,6 +1177,12 @@ int __init omap2_clk_init(void)
 	 */
 	clk_enable_init_clocks();
 
+	/*
+	 * Lock DPLL5 and put it in autoidle.
+	 */
+	if (omap_rev() >= OMAP3430_REV_ES2_0)
+		omap3_clk_lock_dpll5();
+
 	/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
 	/* REVISIT: not yet ready for 343x */
 #if 0
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 4ef7b4f5474e..58aff8485df9 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -137,6 +137,36 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
 	}
 }
 
+/*
+ * _omap2_clkdm_set_hwsup - set the hwsup idle transition bit
+ * @clkdm: struct clockdomain *
+ * @enable: int 0 to disable, 1 to enable
+ *
+ * Internal helper for actually switching the bit that controls hwsup
+ * idle transitions for clkdm.
+ */
+static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
+{
+	u32 v;
+
+	if (cpu_is_omap24xx()) {
+		if (enable)
+			v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
+		else
+			v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
+	} else if (cpu_is_omap34xx()) {
+		if (enable)
+			v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
+		else
+			v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
+	} else {
+		BUG();
+	}
+
+	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
+			    v << __ffs(clkdm->clktrctrl_mask),
+			    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+}
 
 static struct clockdomain *_clkdm_lookup(const char *name)
 {
@@ -456,8 +486,6 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
  */
 void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 {
-	u32 v;
-
 	if (!clkdm)
 		return;
 
@@ -473,18 +501,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 	if (atomic_read(&clkdm->usecount) > 0)
 		_clkdm_add_autodeps(clkdm);
 
-	if (cpu_is_omap24xx())
-		v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
-	else if (cpu_is_omap34xx())
-		v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
-	else
-		BUG();
-
-
-	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
-			    v << __ffs(clkdm->clktrctrl_mask),
-			    clkdm->pwrdm.ptr->prcm_offs,
-			    CM_CLKSTCTRL);
+	_omap2_clkdm_set_hwsup(clkdm, 1);
 
 	pwrdm_clkdm_state_switch(clkdm);
 }
@@ -500,8 +517,6 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
  */
 void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 {
-	u32 v;
-
 	if (!clkdm)
 		return;
 
@@ -514,16 +529,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 	pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
 		 clkdm->name);
 
-	if (cpu_is_omap24xx())
-		v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
-	else if (cpu_is_omap34xx())
-		v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
-	else
-		BUG();
-
-	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
-			    v << __ffs(clkdm->clktrctrl_mask),
-			    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+	_omap2_clkdm_set_hwsup(clkdm, 0);
 
 	if (atomic_read(&clkdm->usecount) > 0)
 		_clkdm_del_autodeps(clkdm);
@@ -569,10 +575,14 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	v = omap2_clkdm_clktrctrl_read(clkdm);
 
 	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
-	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+		/* Disable HW transitions when we are changing deps */
+		_omap2_clkdm_set_hwsup(clkdm, 0);
 		_clkdm_add_autodeps(clkdm);
-	else
+		_omap2_clkdm_set_hwsup(clkdm, 1);
+	} else {
 		omap2_clkdm_wakeup(clkdm);
+	}
 
 	pwrdm_wait_transition(clkdm->pwrdm.ptr);
 	pwrdm_clkdm_state_switch(clkdm);
@@ -623,10 +633,14 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	v = omap2_clkdm_clktrctrl_read(clkdm);
 
 	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
-	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+		/* Disable HW transitions when we are changing deps */
+		_omap2_clkdm_set_hwsup(clkdm, 0);
 		_clkdm_del_autodeps(clkdm);
-	else
+		_omap2_clkdm_set_hwsup(clkdm, 1);
+	} else {
 		omap2_clkdm_sleep(clkdm);
+	}
 
 	pwrdm_clkdm_state_switch(clkdm);
 
diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
index e4ebd6d53135..4af76bb1003a 100644
--- a/arch/arm/mach-omap2/cm4xxx.c
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -22,7 +22,6 @@
 #include <asm/atomic.h>
 
 #include "cm.h"
-#include "cm-regbits-4xxx.h"
 
 /* XXX move this to cm.h */
 /* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
@@ -50,19 +49,7 @@
  */
 int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
 {
-	int i = 0;
-	u8 cm_id;
-	u16 prcm_mod_offs;
-	u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
-
-	cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
-	prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
-
-	while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
-				       OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
-	       (i++ < MAX_MODULE_READY_TIME))
-		udelay(1);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+	/* FIXME: Add clock manager related code */
+	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index bcfcfc7fdb9b..faf7a1e0c525 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -355,29 +355,60 @@ static struct platform_device omap2_mcspi4 = {
 };
 #endif
 
-static void omap_init_mcspi(void)
+#ifdef CONFIG_ARCH_OMAP4
+static inline void omap4_mcspi_fixup(void)
 {
-	if (cpu_is_omap44xx()) {
-		omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
-		omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
-		omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
-		omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
-		omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
-		omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
-		omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
-		omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
-	}
-	platform_device_register(&omap2_mcspi1);
-	platform_device_register(&omap2_mcspi2);
+	omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
+	omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
+	omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
+	omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
+	omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
+	omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
+	omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
+	omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
+}
+#else
+static inline void omap4_mcspi_fixup(void)
+{
+}
+#endif
+
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
 	defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi3);
+static inline void omap2_mcspi3_init(void)
+{
+	platform_device_register(&omap2_mcspi3);
+}
+#else
+static inline void omap2_mcspi3_init(void)
+{
+}
 #endif
+
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi4);
+static inline void omap2_mcspi4_init(void)
+{
+	platform_device_register(&omap2_mcspi4);
+}
+#else
+static inline void omap2_mcspi4_init(void)
+{
+}
 #endif
+
+static void omap_init_mcspi(void)
+{
+	if (cpu_is_omap44xx())
+		omap4_mcspi_fixup();
+
+	platform_device_register(&omap2_mcspi1);
+	platform_device_register(&omap2_mcspi2);
+
+	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi3_init();
+
+	if (cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi4_init();
 }
 
 #else
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7574b6f20e8e..56be87d13edb 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -294,15 +294,17 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	else if (cpu_is_omap34xx())
 		hwmods = omap34xx_hwmods;
 
-	omap_hwmod_init(hwmods);
-	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	/* The OPP tables have to be registered before a clk init */
+	omap_hwmod_init(hwmods);
+	omap2_mux_init();
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+#endif
 	omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
 	omap_hwmod_late_init();
 	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 2d9b5cc981cd..4a0e1cd5c1f4 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -79,7 +79,7 @@ static int omap2_iommu_enable(struct iommu *obj)
 		l = iommu_read_reg(obj, MMU_SYSSTATUS);
 		if (l & MMU_SYS_RESETDONE)
 			break;
-	} while (time_after(jiffies, timeout));
+	} while (!time_after(jiffies, timeout));
 
 	if (!(l & MMU_SYS_RESETDONE)) {
 		dev_err(obj->dev, "can't take mmu out of reset\n");
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 6f71f3730c97..c035ad3426d0 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -30,6 +30,14 @@
 #define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
 #define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
 
+/* SYSCONFIG: register bit definition */
+#define AUTOIDLE	(1 << 0)
+#define SOFTRESET	(1 << 1)
+#define SMARTIDLE	(2 << 3)
+
+/* SYSSTATUS: register bit definition */
+#define RESETDONE	(1 << 0)
+
 #define MBOX_REG_SIZE			0x120
 #define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
 
@@ -69,21 +77,33 @@ static inline void mbox_write_reg(u32 val, size_t ofs)
 /* Mailbox H/W preparations */
 static int omap2_mbox_startup(struct omap_mbox *mbox)
 {
-	unsigned int l;
+	u32 l;
+	unsigned long timeout;
 
 	mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
 	if (IS_ERR(mbox_ick_handle)) {
-		printk("Could not get mailboxes_ick\n");
+		pr_err("Can't get mailboxes_ick\n");
 		return -ENODEV;
 	}
 	clk_enable(mbox_ick_handle);
 
+	mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
+	timeout = jiffies + msecs_to_jiffies(20);
+	do {
+		l = mbox_read_reg(MAILBOX_SYSSTATUS);
+		if (l & RESETDONE)
+			break;
+	} while (!time_after(jiffies, timeout));
+
+	if (!(l & RESETDONE)) {
+		pr_err("Can't take mmu out of reset\n");
+		return -ENODEV;
+	}
+
 	l = mbox_read_reg(MAILBOX_REVISION);
 	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
 
-	/* set smart-idle & autoidle */
-	l = mbox_read_reg(MAILBOX_SYSCONFIG);
-	l |= 0x00000011;
+	l = SMARTIDLE | AUTOIDLE;
 	mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
 	omap2_mbox_enable_irq(mbox, IRQ_RX);
@@ -156,6 +176,9 @@ static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
 
 	mbox_write_reg(bit, p->irqstatus);
+
+	/* Flush posted write for irq status to avoid spurious interrupts */
+	mbox_read_reg(p->irqstatus);
 }
 
 static int omap2_mbox_is_irq(struct omap_mbox *mbox,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 2daa595aaff4..b5fac32aae70 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -460,6 +460,8 @@ MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
@@ -472,6 +474,8 @@ MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 1b4c1600f8d8..2fc4d6abbd0a 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -541,7 +541,7 @@ static int __init pm_dbg_init(void)
 		printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
 		return -ENODEV;
 	}
-		
+
 	d = debugfs_create_dir("pm_debug", NULL);
 	if (IS_ERR(d))
 		return PTR_ERR(d);
@@ -551,7 +551,7 @@ static int __init pm_dbg_init(void)
 	(void) debugfs_create_file("time", S_IRUGO,
 		d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
 
-	pwrdm_for_each(pwrdms_setup, (void *)d);
+	pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
 
 	pm_dbg_dir = debugfs_create_dir("registers", d);
 	if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0ff5a6c53aa0..89463190923a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -51,97 +51,112 @@ static void (*_omap_sram_idle)(u32 *addr, int save_state);
 
 static struct powerdomain *mpu_pwrdm;
 
-/* PRCM Interrupt Handler for wakeups */
-static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+/*
+ * PRCM Interrupt Handler Helper Function
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+static int prcm_clear_mod_irqs(s16 module, u8 regs)
 {
-	u32 wkst, irqstatus_mpu;
-	u32 fclk, iclk;
-
-	/* WKUP */
-	wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+	u32 wkst, fclk, iclk, clken;
+	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+	u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+	u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+	u16 grpsel_off = (regs == 3) ?
+		OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+	int c = 0;
+
+	wkst = prm_read_mod_reg(module, wkst_off);
+	wkst &= prm_read_mod_reg(module, grpsel_off);
 	if (wkst) {
-		iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
-		fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
-		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
-		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
-		prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
-		while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
-			cpu_relax();
-		cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
-		cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+		iclk = cm_read_mod_reg(module, iclk_off);
+		fclk = cm_read_mod_reg(module, fclk_off);
+		while (wkst) {
+			clken = wkst;
+			cm_set_mod_reg_bits(clken, module, iclk_off);
+			/*
+			 * For USBHOST, we don't know whether HOST1 or
+			 * HOST2 woke us up, so enable both f-clocks
+			 */
+			if (module == OMAP3430ES2_USBHOST_MOD)
+				clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+			cm_set_mod_reg_bits(clken, module, fclk_off);
+			prm_write_mod_reg(wkst, module, wkst_off);
+			wkst = prm_read_mod_reg(module, wkst_off);
+			c++;
+		}
+		cm_write_mod_reg(iclk, module, iclk_off);
+		cm_write_mod_reg(fclk, module, fclk_off);
 	}
 
-	/* CORE */
-	wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
-	if (wkst) {
-		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
-		fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
-		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
-		prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
-		while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
-			cpu_relax();
-		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
-		cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
-	}
-	wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
-	if (wkst) {
-		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
-		fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
-		cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-		prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
-		while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
-			cpu_relax();
-		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
-		cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-	}
+	return c;
+}
 
-	/* PER */
-	wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
-	if (wkst) {
-		iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
-		fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
-		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
-		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
-		prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
-		while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
-			cpu_relax();
-		cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
-		cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
-	}
+static int _prcm_int_handle_wakeup(void)
+{
+	int c;
 
+	c = prcm_clear_mod_irqs(WKUP_MOD, 1);
+	c += prcm_clear_mod_irqs(CORE_MOD, 1);
+	c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		/* USBHOST */
-		wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
-		if (wkst) {
-			iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-					       CM_ICLKEN);
-			fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-					       CM_FCLKEN);
-			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
-					    CM_ICLKEN);
-			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
-					    CM_FCLKEN);
-			prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
-					  PM_WKST);
-			while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-						PM_WKST))
-				cpu_relax();
-			cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
-					 CM_ICLKEN);
-			cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
-					 CM_FCLKEN);
-		}
+		c += prcm_clear_mod_irqs(CORE_MOD, 3);
+		c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
 	}
 
-	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
-					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-	prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
-			  OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	return c;
+}
+
+/*
+ * PRCM Interrupt Handler
+ *
+ * The PRM_IRQSTATUS_MPU register indicates if there are any pending
+ * interrupts from the PRCM for the MPU. These bits must be cleared in
+ * order to clear the PRCM interrupt. The PRCM interrupt handler is
+ * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
+ * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
+ * register indicates that a wake-up event is pending for the MPU and
+ * this bit can only be cleared if the all the wake-up events latched
+ * in the various PM_WKST_x registers have been cleared. The interrupt
+ * handler is implemented using a do-while loop so that if a wake-up
+ * event occurred during the processing of the prcm interrupt handler
+ * (setting a bit in the corresponding PM_WKST_x register and thus
+ * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
+ * this would be handled.
+ */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+	u32 irqstatus_mpu;
+	int c = 0;
+
+	do {
+		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+		if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
+			c = _prcm_int_handle_wakeup();
+
+			/*
+			 * Is the MPU PRCM interrupt handler racing with the
+			 * IVA2 PRCM interrupt handler ?
+			 */
+			WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
+			     "but no wakeup sources are marked\n");
+		} else {
+			/* XXX we need to expand our PRCM interrupt handler */
+			WARN(1, "prcm: WARNING: PRCM interrupt received, but "
+			     "no code to handle it (%08x)\n", irqstatus_mpu);
+		}
+
+		prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
-		cpu_relax();
+	} while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
 
 	return IRQ_HANDLED;
 }
@@ -624,6 +639,17 @@ static void __init prcm_setup_regs(void)
 	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
+	/* Enable wakeups in PER */
+	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
+			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
+			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_PER_MOD, PM_WKEN);
+	/* and allow them to wake up MPU */
+	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
+			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
+			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
 	/* Don't attach IVA interrupts */
 	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
 	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2594cbff3947..f00289abd30f 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -273,35 +273,50 @@ struct powerdomain *pwrdm_lookup(const char *name)
 }
 
 /**
- * pwrdm_for_each - call function on each registered clockdomain
+ * pwrdm_for_each_nolock - call function on each registered clockdomain
  * @fn: callback function *
  *
  * Call the supplied function for each registered powerdomain.  The
  * callback function can return anything but 0 to bail out early from
- * the iterator.  The callback function is called with the pwrdm_rwlock
- * held for reading, so no powerdomain structure manipulation
- * functions should be called from the callback, although hardware
- * powerdomain control functions are fine.  Returns the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure; or -EINVAL if the function
- * pointer is null.
+ * the iterator.  Returns the last return value of the callback function, which
+ * should be 0 for success or anything else to indicate failure; or -EINVAL if
+ * the function pointer is null.
  */
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
-			void *user)
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+				void *user)
 {
 	struct powerdomain *temp_pwrdm;
-	unsigned long flags;
 	int ret = 0;
 
 	if (!fn)
 		return -EINVAL;
 
-	read_lock_irqsave(&pwrdm_rwlock, flags);
 	list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
 		ret = (*fn)(temp_pwrdm, user);
 		if (ret)
 			break;
 	}
+
+	return ret;
+}
+
+/**
+ * pwrdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * This function is the same as 'pwrdm_for_each_nolock()', but keeps the
+ * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
+ * functions should be called from the callback, although hardware powerdomain
+ * control functions are fine.
+ */
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user)
+{
+	unsigned long flags;
+	int ret;
+
+	read_lock_irqsave(&pwrdm_rwlock, flags);
+	ret = pwrdm_for_each_nolock(fn, user);
 	read_unlock_irqrestore(&pwrdm_rwlock, flags);
 
 	return ret;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3a529c77daa8..54dfeb5d5667 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
-#ifdef CONFIG_ARCH_OMAP4
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
-		.mapbase	= OMAP_UART4_BASE,
-		.irq		= 70,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-#endif
 		.flags		= 0
 	}
 };
@@ -126,7 +116,7 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 #ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -579,7 +569,7 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 	{
 		.pdev = {
 			.name			= "serial8250",
-			.id			= 3
+			.id			= 3,
 			.dev			= {
 				.platform_data	= serial_platform_data3,
 			},
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index aac2cda60e09..102916f1e465 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -43,10 +43,10 @@
 
 #define CM_X300_ETH_PHYS	0x08000010
 
-#define GPIO82_MMC2_IRQ		(82)
-#define GPIO85_MMC2_WP		(85)
+#define GPIO82_MMC_IRQ		(82)
+#define GPIO85_MMC_WP		(85)
 
-#define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define	CM_X300_MMC_IRQ		IRQ_GPIO(GPIO82_MMC_IRQ)
 
 #define GPIO95_RTC_CS		(95)
 #define GPIO96_RTC_WR		(96)
@@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {}
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO82_MMC_IRQ,
+	.gpio_card_ro		= GPIO85_MMC_WP,
+	.gpio_power		= -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
    no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
-			    irq_handler_t cm_x300_detect_int,
-			    void *data)
+static int cm_x300_mci2_init(struct device *dev,
+			     irq_handler_t cm_x300_detect_int,
+	void *data)
 {
 	return 0;
 }
 
-static void cm_x300_mci_exit(struct device *dev, void *data)
+static void cm_x300_mci2_exit(struct device *dev, void *data)
 {
 }
 
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
 	.detect_delay		= 20,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= cm_x300_mci_init,
-	.exit			= cm_x300_mci_exit,
+	.init 			= cm_x300_mci2_init,
+	.exit			= cm_x300_mci2_exit,
 	.gpio_card_detect	= -1,
 	.gpio_card_ro		= -1,
 	.gpio_power		= -1,
 };
 
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay		= 20,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO82_MMC2_IRQ,
-	.gpio_card_ro		= GPIO85_MMC2_WP,
-	.gpio_power		= -1,
-};
-
 static void __init cm_x300_init_mmc(void)
 {
 	pxa_set_mci_info(&cm_x300_mci_platform_data);
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 3a8ee2272add..983cc8c20081 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
 
 static pxa_freqs_t pxa27x_freqs[] = {
 	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
 	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
 	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
 	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 79141f862728..965480eb4fe6 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = {
 };
 
 struct smsc911x_platform_config csb726_lan_config = {
-	.irq_type	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index ee8d6038ce82..82ff5733e4dc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/mtd/physmap.h>
@@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = {
 };
 
 
+static struct gpio_keys_button spitz_gpio_keys[] = {
+	{
+		.type	= EV_PWR,
+		.code	= KEY_SUSPEND,
+		.gpio	= SPITZ_GPIO_ON_KEY,
+		.desc	= "On/Off",
+		.wakeup	= 1,
+	},
+	/* Two buttons detecting the lid state */
+	{
+		.type	= EV_SW,
+		.code	= 0,
+		.gpio	= SPITZ_GPIO_SWA,
+		.desc	= "Display Down",
+	},
+	{
+		.type	= EV_SW,
+		.code	= 1,
+		.gpio	= SPITZ_GPIO_SWB,
+		.desc	= "Lid Closed",
+	},
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+	.buttons	= spitz_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &spitz_gpio_keys_platform_data,
+	},
+};
+
+
 /*
  * Spitz LEDs
  */
@@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = {
 static struct platform_device *devices[] __initdata = {
 	&spitzscoop_device,
 	&spitzkbd_device,
+	&spitz_gpio_keys_device,
 	&spitzled_device,
 	&sharpsl_nand_device,
 	&sharpsl_rom_device,
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 81ffff7ed498..4e5c07f4e456 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -71,11 +71,6 @@ config SA1100_H3600
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
 	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
-config SA1100_H3XXX
-	bool
-	depends on SA1100_H3100 || SA1100_H3600
-	default y
-
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
 	select SA1111
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8a5546e6d547..bb7b8198d0c4 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
+obj-$(CONFIG_SA1100_H3100)		+= h3600.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 95d92e8e56a8..b9cbb56d6e9d 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -77,7 +77,7 @@ static struct clock_event_device ckevt_sa1100_osmr0 = {
 	.set_mode	= sa1100_osmr0_set_mode,
 };
 
-static cycle_t sa1100_read_oscr(void)
+static cycle_t sa1100_read_oscr(struct clocksource *s)
 {
 	return OSCR;
 }
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 63c8f27fb15a..0b35826b7d1d 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -281,6 +281,16 @@ int gpio_unregister_callback(unsigned gpio)
 }
 EXPORT_SYMBOL(gpio_unregister_callback);
 
+/* Non-zero means valid */
+int gpio_is_valid(int number)
+{
+	if (number >= 0 &&
+	    number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
+		return 1;
+	return 0;
+}
+EXPORT_SYMBOL(gpio_is_valid);
+
 int gpio_request(unsigned gpio, const char *label)
 {
 	if (gpio_pin[gpio].users)
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index c8174128d7eb..7b1fc984abb6 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -258,6 +258,7 @@
 #define PIN_TO_PORT(val) (val >> 3)
 
 /* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_is_valid(int number);
 extern int gpio_request(unsigned gpio, const char *label);
 extern void gpio_free(unsigned gpio);
 extern int gpio_direction_input(unsigned gpio);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 8d43e58f9244..9264d814cd7a 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -17,7 +17,7 @@ config CPU_ARM610
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	help
 	  The ARM610 is the successor to the ARM3 processor
 	  and was produced by VLSI Technology Inc.
@@ -31,7 +31,7 @@ config CPU_ARM7TDMI
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
@@ -49,7 +49,7 @@ config CPU_ARM710
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
 	  designed by Advanced RISC Machines Ltd. The ARM710 is the
@@ -64,7 +64,7 @@ config CPU_ARM720T
 	bool "Support ARM720T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -83,7 +83,7 @@ config CPU_ARM740T
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V3	# although the core is v4t
 	select CPU_CP15_MPU
 	help
@@ -100,7 +100,7 @@ config CPU_ARM9TDMI
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	help
 	  A 32-bit RISC microprocessor based on the ARM9 processor core
@@ -114,7 +114,7 @@ config CPU_ARM920T
 	bool "Support ARM920T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -122,10 +122,7 @@ config CPU_ARM920T
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM920T is licensed to be produced by numerous vendors,
-	  and is used in the Maverick EP9312 and the Samsung S3C2410.
-
-	  More information on the Maverick EP9312 at
-	  <http://linuxdevices.com/products/PD2382866068.html>.
+	  and is used in the Cirrus EP93xx and the Samsung S3C2410.
 
 	  Say Y if you want support for the ARM920T processor.
 	  Otherwise, say N.
@@ -135,7 +132,7 @@ config CPU_ARM922T
 	bool "Support ARM922T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -154,7 +151,7 @@ config CPU_ARM925T
  	bool "Support ARM925T processor" if ARCH_OMAP1
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -173,7 +170,7 @@ config CPU_ARM926T
 	bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
@@ -191,7 +188,7 @@ config CPU_FA526
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_CACHE_FA
@@ -210,7 +207,7 @@ config CPU_ARM940T
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	help
@@ -228,7 +225,7 @@ config CPU_ARM946E
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	help
@@ -244,7 +241,7 @@ config CPU_ARM1020
 	bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -262,7 +259,7 @@ config CPU_ARM1020E
 	bool "Support ARM1020E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -275,7 +272,7 @@ config CPU_ARM1022
 	bool "Support ARM1022E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -293,7 +290,7 @@ config CPU_ARM1026
 	bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -311,7 +308,7 @@ config CPU_SA110
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -331,7 +328,7 @@ config CPU_SA1100
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -342,7 +339,7 @@ config CPU_XSCALE
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -352,7 +349,7 @@ config CPU_XSC3
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -363,7 +360,7 @@ config CPU_MOHAWK
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -374,7 +371,7 @@ config CPU_FEROCEON
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_FEROCEON if MMU
@@ -394,7 +391,7 @@ config CPU_V6
 	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_V6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -420,7 +417,7 @@ config CPU_V7
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
-	select CPU_PABRT_IFAR
+	select CPU_PABRT_V7
 	select CPU_CACHE_V7
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -482,10 +479,13 @@ config CPU_ABRT_EV6
 config CPU_ABRT_EV7
 	bool
 
-config CPU_PABRT_IFAR
+config CPU_PABRT_LEGACY
+	bool
+
+config CPU_PABRT_V6
 	bool
 
-config CPU_PABRT_NOIFAR
+config CPU_PABRT_V7
 	bool
 
 # The cache model
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 63e3f6dd0e21..055cb2aa8134 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -27,6 +27,10 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ)	+= abort-ev5tj.o
 obj-$(CONFIG_CPU_ABRT_EV6)	+= abort-ev6.o
 obj-$(CONFIG_CPU_ABRT_EV7)	+= abort-ev7.o
 
+obj-$(CONFIG_CPU_PABRT_LEGACY)	+= pabort-legacy.o
+obj-$(CONFIG_CPU_PABRT_V6)	+= pabort-v6.o
+obj-$(CONFIG_CPU_PABRT_V7)	+= pabort-v7.o
+
 obj-$(CONFIG_CPU_CACHE_V3)	+= cache-v3.o
 obj-$(CONFIG_CPU_CACHE_V4)	+= cache-v4.o
 obj-$(CONFIG_CPU_CACHE_V4WT)	+= cache-v4wt.o
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 8f5c13f4c936..295e25dd6381 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -12,6 +12,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v6_coherent_user_range)
-
+ UNWIND(.fnstart		)
 #ifdef HARVARD_CACHE
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
+1:
+ USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
 	add	r0, r0, #CACHE_LINE_SIZE
+2:
 	cmp	r0, r1
 	blo	1b
 #endif
@@ -143,6 +146,19 @@ ENTRY(v6_coherent_user_range)
 	mov	pc, lr
 
 /*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
+/*
  *	v6_flush_kern_dcache_page(kaddr)
  *
  *	Ensure that the data held in the page kaddr is written back
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index bda0ec31a4e2..e1bd9759617f 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v7_coherent_user_range)
+ UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
-1:	mcr	p15, 0, r0, c7, c11, 1		@ clean D line to the point of unification
+1:
+ USER(	mcr	p15, 0, r0, c7, c11, 1	)	@ clean D line to the point of unification
 	dsb
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I line
+ USER(	mcr	p15, 0, r0, c7, c5, 1	)	@ invalidate I line
 	add	r0, r0, r2
+2:
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
@@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range)
 	dsb
 	isb
 	mov	pc, lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index bc0099d5ae85..d0d17b6a3703 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 
 	page = pfn_to_page(pfn);
 	mapping = page_mapping(page);
-	if (mapping) {
 #ifndef CONFIG_SMP
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
-		if (dirty)
-			__flush_dcache_page(mapping, page);
+	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+		__flush_dcache_page(mapping, page);
 #endif
-
+	if (mapping) {
 		if (cache_is_vivt())
 			make_coherent(mapping, vma, addr, pfn);
 		else if (vma->vm_flags & VM_EXEC)
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 379f78556055..10e06801afb3 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		 * down_read()
 		 */
 		might_sleep();
+#ifdef CONFIG_DEBUG_VM
+		if (!user_mode(regs) &&
+		    !search_exception_tables(regs->ARM_pc))
+			goto no_context;
+#endif
 	}
 
 	fault = __do_page_fault(mm, addr, fsr, tsk);
@@ -519,9 +524,58 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	arm_notify_die("", regs, &info, fsr, 0);
 }
 
+
+static struct fsr_info ifsr_info[] = {
+	{ do_bad,		SIGBUS,  0,		"unknown 0"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 1"			   },
+	{ do_bad,		SIGBUS,  0,		"debug event"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section access flag fault"	   },
+	{ do_bad,		SIGBUS,  0,		"unknown 4"			   },
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page access flag fault"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 10"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 20"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 22"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 24"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
+};
+
 asmlinkage void __exception
-do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
+do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 {
-	do_translation_fault(addr, FSR_LNX_PF, regs);
+	const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr);
+	struct siginfo info;
+
+	if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
+		return;
+
+	printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
+		inf->name, ifsr, addr);
+
+	info.si_signo = inf->sig;
+	info.si_errno = 0;
+	info.si_code  = inf->code;
+	info.si_addr  = (void __user *)addr;
+	arm_notify_die("", regs, &info, ifsr, 0);
 }
 
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 73cae57fa707..30f82fb5918c 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -46,6 +46,8 @@ void *kmap_atomic(struct page *page, enum km_type type)
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	debug_kmap_atomic(type);
+
 	kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 877c492f8e10..40940d7ce4ff 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -483,7 +483,7 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
 	/*
 	 * Convert start_pfn/end_pfn to a struct page pointer.
 	 */
-	start_pg = pfn_to_page(start_pfn);
+	start_pg = pfn_to_page(start_pfn - 1) + 1;
 	end_pg = pfn_to_page(end_pfn);
 
 	/*
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index f7457fea6de8..2b7996401b0f 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size)
 {
 	if (addr < PHYS_OFFSET)
 		return 0;
-	if (addr + size >= __pa(high_memory - 1))
+	if (addr + size > __pa(high_memory - 1) + 1)
 		return 0;
 
 	return 1;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4426ee67ceca..02243eeccf50 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -21,6 +21,7 @@
 #include <asm/cachetype.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
+#include <asm/smp_plat.h>
 #include <asm/tlb.h>
 #include <asm/highmem.h>
 
@@ -709,10 +710,6 @@ static void __init sanity_check_meminfo(void)
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
 						 "ignoring high memory\n");
-			} else if (cache_is_vipt_aliasing()) {
-				printk(KERN_CRIT "HIGHMEM is not yet supported "
-						 "with VIPT aliasing cache, "
-						 "ignoring high memory\n");
 			} else {
 				memmove(bank + 1, bank,
 					(meminfo.nr_banks - i) * sizeof(*bank));
@@ -726,6 +723,8 @@ static void __init sanity_check_meminfo(void)
 			bank->size = VMALLOC_MIN - __va(bank->start);
 		}
 #else
+		bank->highmem = highmem;
+
 		/*
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
@@ -754,6 +753,38 @@ static void __init sanity_check_meminfo(void)
 #endif
 		j++;
 	}
+#ifdef CONFIG_HIGHMEM
+	if (highmem) {
+		const char *reason = NULL;
+
+		if (cache_is_vipt_aliasing()) {
+			/*
+			 * Interactions between kmap and other mappings
+			 * make highmem support with aliasing VIPT caches
+			 * rather difficult.
+			 */
+			reason = "with VIPT aliasing cache";
+#ifdef CONFIG_SMP
+		} else if (tlb_ops_need_broadcast()) {
+			/*
+			 * kmap_high needs to occasionally flush TLB entries,
+			 * however, if the TLB entries need to be broadcast
+			 * we may deadlock:
+			 *  kmap_high(irqs off)->flush_all_zero_pkmaps->
+			 *  flush_tlb_kernel_range->smp_call_function_many
+			 *   (must not be called with irqs off)
+			 */
+			reason = "without hardware TLB ops broadcasting";
+#endif
+		}
+		if (reason) {
+			printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
+				reason);
+			while (j > 0 && meminfo.bank[j - 1].highmem)
+				j--;
+		}
+	}
+#endif
 	meminfo.nr_banks = j;
 }
 
diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S
new file mode 100644
index 000000000000..87970eba88ea
--- /dev/null
+++ b/arch/arm/mm/pabort-legacy.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: legacy_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = Simulated IFSR with section translation fault status
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(legacy_pabort)
+	mov	r1, #5
+	mov	pc, lr
+ENDPROC(legacy_pabort)
diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S
new file mode 100644
index 000000000000..06e3d1ef2115
--- /dev/null
+++ b/arch/arm/mm/pabort-v6.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(v6_pabort)
+	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
+	mov	pc, lr
+ENDPROC(v6_pabort)
diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S
new file mode 100644
index 000000000000..a8b3b300a18d
--- /dev/null
+++ b/arch/arm/mm/pabort-v7.S
@@ -0,0 +1,20 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(v7_pabort)
+	mrc	p15, 0, r0, c6, c0, 2		@ get IFAR
+	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
+	mov	pc, lr
+ENDPROC(v7_pabort)
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index b5551bf010aa..d9fb4b98c49f 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -449,7 +449,7 @@ arm1020_crval:
 	.type	arm1020_processor_functions, #object
 arm1020_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1020_proc_init
 	.word	cpu_arm1020_proc_fin
 	.word	cpu_arm1020_reset
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 8bc6740c29eb..7453b75dcea5 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -430,7 +430,7 @@ arm1020e_crval:
 	.type	arm1020e_processor_functions, #object
 arm1020e_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1020e_proc_init
 	.word	cpu_arm1020e_proc_fin
 	.word	cpu_arm1020e_reset
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 2cd03e66c0a3..8eb72d75a8b6 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -413,7 +413,7 @@ arm1022_crval:
 	.type	arm1022_processor_functions, #object
 arm1022_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1022_proc_init
 	.word	cpu_arm1022_proc_fin
 	.word	cpu_arm1022_reset
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index ad961a897f6e..3b59f0d67139 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -408,7 +408,7 @@ arm1026_crval:
 	.type	arm1026_processor_functions, #object
 arm1026_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1026_proc_init
 	.word	cpu_arm1026_proc_fin
 	.word	cpu_arm1026_reset
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 80d6e1de069a..3f9cd3d8f6d5 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -278,7 +278,7 @@ __arm7_setup:	mov	r0, #0
 		.type	arm6_processor_functions, #object
 ENTRY(arm6_processor_functions)
 		.word	cpu_arm6_data_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm6_proc_init
 		.word	cpu_arm6_proc_fin
 		.word	cpu_arm6_reset
@@ -295,7 +295,7 @@ ENTRY(arm6_processor_functions)
 		.type	arm7_processor_functions, #object
 ENTRY(arm7_processor_functions)
 		.word	cpu_arm7_data_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm7_proc_init
 		.word	cpu_arm7_proc_fin
 		.word	cpu_arm7_reset
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 85ae18695f10..0b62de244666 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -181,7 +181,7 @@ arm720_crval:
 		.type	arm720_processor_functions, #object
 ENTRY(arm720_processor_functions)
 		.word	v4t_late_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm720_proc_init
 		.word	cpu_arm720_proc_fin
 		.word	cpu_arm720_reset
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 4f95bee63e95..01860cdeb2ec 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -126,7 +126,7 @@ __arm740_setup:
 	.type	arm740_processor_functions, #object
 ENTRY(arm740_processor_functions)
 	.word	v4t_late_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm740_proc_init
 	.word	cpu_arm740_proc_fin
 	.word	cpu_arm740_reset
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 93e05fa7bed4..1201b9863829 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -64,7 +64,7 @@ __arm7tdmi_setup:
 		.type	arm7tdmi_processor_functions, #object
 ENTRY(arm7tdmi_processor_functions)
 		.word	v4t_late_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm7tdmi_proc_init
 		.word	cpu_arm7tdmi_proc_fin
 		.word	cpu_arm7tdmi_reset
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 914d688394fc..2b7c197cc58d 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -395,7 +395,7 @@ arm920_crval:
 	.type	arm920_processor_functions, #object
 arm920_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm920_proc_init
 	.word	cpu_arm920_proc_fin
 	.word	cpu_arm920_reset
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 51c9c9859e58..06a1aa4e3398 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -399,7 +399,7 @@ arm922_crval:
 	.type	arm922_processor_functions, #object
 arm922_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm922_proc_init
 	.word	cpu_arm922_proc_fin
 	.word	cpu_arm922_reset
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 2724526d89c1..cb53435a85ae 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -462,7 +462,7 @@ arm925_crval:
 	.type	arm925_processor_functions, #object
 arm925_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm925_proc_init
 	.word	cpu_arm925_proc_fin
 	.word	cpu_arm925_reset
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 54466937bff9..1c4848704bb3 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -415,7 +415,7 @@ arm926_crval:
 	.type	arm926_processor_functions, #object
 arm926_processor_functions:
 	.word	v5tj_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm926_proc_init
 	.word	cpu_arm926_proc_fin
 	.word	cpu_arm926_reset
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index f595117caf55..5b0f8464c8f2 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -322,7 +322,7 @@ __arm940_setup:
 	.type	arm940_processor_functions, #object
 ENTRY(arm940_processor_functions)
 	.word	nommu_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm940_proc_init
 	.word	cpu_arm940_proc_fin
 	.word	cpu_arm940_reset
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index e03f6ff1fb26..40c0449a139b 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -377,7 +377,7 @@ __arm946_setup:
 	.type	arm946_processor_functions, #object
 ENTRY(arm946_processor_functions)
 	.word	nommu_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm946_proc_init
 	.word	cpu_arm946_proc_fin
 	.word	cpu_arm946_reset
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index be6c11d2b3fb..28545c29dbcd 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -64,7 +64,7 @@ __arm9tdmi_setup:
 		.type	arm9tdmi_processor_functions, #object
 ENTRY(arm9tdmi_processor_functions)
 		.word	nommu_early_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm9tdmi_proc_init
 		.word	cpu_arm9tdmi_proc_fin
 		.word	cpu_arm9tdmi_reset
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 08b8a955d5d7..08f5ac237ad4 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -191,7 +191,7 @@ fa526_cr1_set:
 	.type	fa526_processor_functions, #object
 fa526_processor_functions:
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_fa526_proc_init
 	.word	cpu_fa526_proc_fin
 	.word	cpu_fa526_reset
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 0fe1f8fc3488..d0d7795200fc 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -499,7 +499,7 @@ feroceon_crval:
 	.type	feroceon_processor_functions, #object
 feroceon_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_feroceon_proc_init
 	.word	cpu_feroceon_proc_fin
 	.word	cpu_feroceon_reset
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 540f5078496b..52b5fd74fbb3 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -359,7 +359,7 @@ mohawk_crval:
 	.type	mohawk_processor_functions, #object
 mohawk_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_mohawk_proc_init
 	.word	cpu_mohawk_proc_fin
 	.word	cpu_mohawk_reset
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 90a7e5279f29..7b706b389906 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -199,7 +199,7 @@ sa110_crval:
 	.type	sa110_processor_functions, #object
 ENTRY(sa110_processor_functions)
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_sa110_proc_init
 	.word	cpu_sa110_proc_fin
 	.word	cpu_sa110_reset
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 451e2d953e2a..ee7700242c19 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -214,7 +214,7 @@ sa1100_crval:
 	.type	sa1100_processor_functions, #object
 ENTRY(sa1100_processor_functions)
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_sa1100_proc_init
 	.word	cpu_sa1100_proc_fin
 	.word	cpu_sa1100_reset
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 524ddae92595..194737d60a22 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -191,7 +191,7 @@ v6_crval:
 	.type	v6_processor_functions, #object
 ENTRY(v6_processor_functions)
 	.word	v6_early_abort
-	.word	pabort_noifar
+	.word	v6_pabort
 	.word	cpu_v6_proc_init
 	.word	cpu_v6_proc_fin
 	.word	cpu_v6_reset
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index f3fa1c32fe92..23ebcf6eab9f 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -295,7 +295,7 @@ __v7_setup_stack:
 	.type	v7_processor_functions, #object
 ENTRY(v7_processor_functions)
 	.word	v7_early_abort
-	.word	pabort_ifar
+	.word	v7_pabort
 	.word	cpu_v7_proc_init
 	.word	cpu_v7_proc_fin
 	.word	cpu_v7_reset
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 33515c214b92..2028f3702881 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -428,7 +428,7 @@ xsc3_crval:
 	.type	xsc3_processor_functions, #object
 ENTRY(xsc3_processor_functions)
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_xsc3_proc_init
 	.word	cpu_xsc3_proc_fin
 	.word	cpu_xsc3_reset
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 423394260bcb..f056c283682d 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -511,7 +511,7 @@ xscale_crval:
 	.type	xscale_processor_functions, #object
 ENTRY(xscale_processor_functions)
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_xscale_proc_init
 	.word	cpu_xscale_proc_fin
 	.word	cpu_xscale_reset
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
index fe581383d3e2..f7d2ec5ee9a1 100644
--- a/arch/arm/oprofile/op_model_v6.c
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -33,6 +33,9 @@ static int irqs[] = {
 #ifdef CONFIG_ARCH_OMAP2
 	3,
 #endif
+#ifdef CONFIG_ARCH_BCMRING
+	IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
+#endif
 };
 
 static void armv6_pmu_stop(void)
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 77fa7cc7d162..ce31f316ac75 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -257,7 +257,8 @@ void __init iop3xx_atu_setup(void)
 	*IOP3XX_OUMWTVR0 = 0;
 
 	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE;
+	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
+			  IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
 	*IOP3XX_OUMWTVR1 = 0;
 
 	/* BAR 3 ( Disabled ) */
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 3695bbe3ee28..8da95d57c21f 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -85,7 +85,7 @@ void __init iop_init_time(unsigned long tick_rate)
 {
 	u32 timer_ctl;
 
-	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
 	ticks_per_usec = tick_rate / 1000000;
 	next_jiffy_time = 0xffffffff;
 	iop_tick_rate = tick_rate;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index fd3154ae69b1..b53125f41293 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -829,10 +829,10 @@ EXPORT_SYMBOL(omap_free_dma);
  *
  * @param arb_rate
  * @param max_fifo_depth
- * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
- * 						    DMA_THREAD_RESERVE_ONET
- * 						    DMA_THREAD_RESERVE_TWOT
- * 						    DMA_THREAD_RESERVE_THREET
+ * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
+ * 						   DMA_THREAD_RESERVE_ONET
+ * 						   DMA_THREAD_RESERVE_TWOT
+ * 						   DMA_THREAD_RESERVE_THREET
  */
 void
 omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
@@ -844,11 +844,14 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
 		return;
 	}
 
+	if (max_fifo_depth == 0)
+		max_fifo_depth = 1;
 	if (arb_rate == 0)
 		arb_rate = 1;
 
-	reg = (arb_rate & 0xff) << 16;
-	reg |= (0xff & max_fifo_depth);
+	reg = 0xff & max_fifo_depth;
+	reg |= (0x3 & tparams) << 12;
+	reg |= (arb_rate & 0xff) << 16;
 
 	dma_write(reg, GCR);
 }
@@ -975,6 +978,14 @@ void omap_stop_dma(int lch)
 {
 	u32 l;
 
+	/* Disable all interrupts on the channel */
+	if (cpu_class_is_omap1())
+		dma_write(0, CICR(lch));
+
+	l = dma_read(CCR(lch));
+	l &= ~OMAP_DMA_CCR_EN;
+	dma_write(l, CCR(lch));
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
@@ -992,18 +1003,8 @@ void omap_stop_dma(int lch)
 			next_lch = dma_chan[cur_lch].next_lch;
 			cur_lch = next_lch;
 		} while (next_lch != -1);
-
-		return;
 	}
 
-	/* Disable all interrupts on the channel */
-	if (cpu_class_is_omap1())
-		dma_write(0, CICR(lch));
-
-	l = dma_read(CCR(lch));
-	l &= ~OMAP_DMA_CCR_EN;
-	dma_write(l, CCR(lch));
-
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 EXPORT_SYMBOL(omap_stop_dma);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 693839c89ad0..71ebd7fcfea1 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -250,7 +250,7 @@ static struct gpio_bank gpio_bank_730[7] = {
 
 #ifdef CONFIG_ARCH_OMAP850
 static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP1_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 11e73d9e8928..f129efb3075e 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -303,32 +303,21 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_is_omap2430()		0
 #define cpu_is_omap3430()		0
 
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		is_omap730()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap850
-#  define cpu_is_omap850()		is_omap850()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		1
-# endif
-#endif
-#else
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap850
-#  define cpu_is_omap850()		1
-# endif
-#endif
-
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
  */
+
+#if defined(CONFIG_ARCH_OMAP730)
+# undef  cpu_is_omap730
+# define cpu_is_omap730()		is_omap730()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP850)
+# undef  cpu_is_omap850
+# define cpu_is_omap850()		is_omap850()
+#endif
+
 #if defined(CONFIG_ARCH_OMAP15XX)
 # undef  cpu_is_omap310
 # undef  cpu_is_omap1510
@@ -433,3 +422,5 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 45ea3ae3c995..3ae52ccc793c 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,6 +10,8 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
+#warning: Please update the board to use matrix_keypad.h instead
+
 struct omap_kp_platform_data {
 	int rows;
 	int cols;
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 98dfab651dfc..0f49d2d563d9 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -840,12 +840,14 @@ enum omap34xx_index {
 	 */
 	AF26_34XX_GPIO0,
 	AF22_34XX_GPIO9,
+	AG9_34XX_GPIO23,
 	AH8_34XX_GPIO29,
 	U8_34XX_GPIO54_OUT,
 	U8_34XX_GPIO54_DOWN,
 	L8_34XX_GPIO63,
 	G25_34XX_GPIO86_OUT,
 	AG4_34XX_GPIO134_OUT,
+	AF4_34XX_GPIO135_OUT,
 	AE4_34XX_GPIO136_OUT,
 	AF6_34XX_GPIO140_UP,
 	AE6_34XX_GPIO141,
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 6271d8556a40..fa6461423bd0 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -135,6 +135,8 @@ struct powerdomain *pwrdm_lookup(const char *name);
 
 int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
 			void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user);
 
 int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
 int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4b6012707307..94584f167a82 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
 		nent = 1; /* for the next L1 entry */
 	} else {
 		bytes = IOPGD_SIZE;
-		if (*iopgd & IOPGD_SUPER) {
+		if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
 			nent *= 16;
 			/* rewind to the 1st entry */
 			iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 6fc52fcbdc03..dc3fac3dd0ea 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -47,7 +47,7 @@
  *	'va':	mpu virtual address
  *
  *	'c':	contiguous memory area
- *	'd':	dicontiguous memory area
+ *	'd':	discontiguous memory area
  *	'a':	anonymous memory allocation
  *	'()':	optional feature
  *
@@ -199,7 +199,8 @@ static void *vmap_sg(const struct sg_table *sgt)
 		va += bytes;
 	}
 
-	flush_cache_vmap(new->addr, new->addr + total);
+	flush_cache_vmap((unsigned long)new->addr,
+				(unsigned long)(new->addr + total));
 	return new->addr;
 
 err_out:
@@ -362,8 +363,9 @@ void *da_to_va(struct iommu *obj, u32 da)
 		goto out;
 	}
 	va = area->va;
-	mutex_unlock(&obj->mmap_lock);
 out:
+	mutex_unlock(&obj->mmap_lock);
+
 	return va;
 }
 EXPORT_SYMBOL_GPL(da_to_va);
@@ -390,14 +392,14 @@ static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
 	}
 
 	va_end = _va + PAGE_SIZE * i;
-	flush_cache_vmap(_va, va_end);
+	flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
 }
 
 static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
 {
 	/*
 	 * Actually this is not necessary at all, just exists for
-	 * consistency of the code readibility.
+	 * consistency of the code readability.
 	 */
 	BUG_ON(!sgt);
 }
@@ -433,7 +435,7 @@ static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
 {
 	/*
 	 * Actually this is not necessary at all, just exists for
-	 * consistency of the code readibility
+	 * consistency of the code readability
 	 */
 	BUG_ON(!sgt);
 }
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 88ac9768f1c1..e664b912d7bb 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -595,7 +595,7 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 	rx &= 1;
 	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 		w = OMAP_MCBSP_READ(io_base, RCCR);
-		w |= (tx ? RDISABLE : 0);
+		w |= (rx ? RDISABLE : 0);
 		OMAP_MCBSP_WRITE(io_base, RCCR, w);
 	}
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 925f64711c37..75d1f26e5b17 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -270,7 +270,8 @@ void * omap_sram_push(void * start, unsigned long size)
 	omap_sram_ceil -= size;
 	omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
 	memcpy((void *)omap_sram_ceil, start, size);
-	flush_icache_range((unsigned long)start, (unsigned long)(start + size));
+	flush_icache_range((unsigned long)omap_sram_ceil,
+		(unsigned long)(omap_sram_ceil + size));
 
 	return (void *)omap_sram_ceil;
 }
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 11117a7ba911..4d36b784fb8b 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/clk.h>
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 2d0852ac3b27..c2cef6139683 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -2,8 +2,11 @@
 #define _ARCH_MCI_H
 
 struct s3c24xx_mci_pdata {
+	unsigned int	no_wprotect : 1;
+	unsigned int	no_detect : 1;
 	unsigned int	wprotect_invert : 1;
 	unsigned int	detect_invert : 1;   /* set => detect active high. */
+	unsigned int	use_dma : 1;
 
 	unsigned int	gpio_detect;
 	unsigned int	gpio_wprotect;
diff --git a/arch/blackfin/ADI_BSD.txt b/arch/blackfin/ADI_BSD.txt
new file mode 100644
index 000000000000..501d0b645943
--- /dev/null
+++ b/arch/blackfin/ADI_BSD.txt
@@ -0,0 +1,41 @@
+This BSD-Style License applies to a few files in ./arch/blackfin directory,
+and is included here, so people understand which code they can use outside
+the Linux kernel, in non-GPL based projects.
+
+Using the files released under the "ADI BSD" license, must comply with
+these license terms.
+
+--------------------------------------------------------------------------
+
+Copyright Analog Devices, Inc.
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+  - Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+  - Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+  - Neither the name of Analog Devices, Inc. nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+  - The use of this software may or may not infringe the patent rights
+    of one or more patent holders.  This license does not release you
+    from the requirement that you obtain separate licenses from these
+    patent holders to use this software.
+
+THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 9a01d445eca8..ae6a60f10120 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -47,6 +47,9 @@ config GENERIC_HARDIRQS
 config GENERIC_IRQ_PROBE
 	def_bool y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	def_bool y
+
 config GENERIC_GPIO
 	def_bool y
 
@@ -229,7 +232,7 @@ endchoice
 
 config SMP
 	depends on BF561
-	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU,
@@ -613,12 +616,10 @@ comment "Kernel Timer/Scheduler"
 source kernel/Kconfig.hz
 
 config GENERIC_TIME
-	bool "Generic time"
-	default y
+	def_bool y
 
 config GENERIC_CLOCKEVENTS
 	bool "Generic clock events"
-	depends on GENERIC_TIME
 	default y
 
 choice
@@ -653,6 +654,10 @@ config GPTMR0_CLOCKSOURCE
 	depends on GENERIC_CLOCKEVENTS
 	depends on !TICKSOURCE_GPTMR0
 
+config ARCH_USES_GETTIMEOFFSET
+	depends on !GENERIC_CLOCKEVENTS
+	def_bool y
+
 source kernel/time/Kconfig
 
 comment "Misc"
diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h
index 88f36d599fe8..d27c6274247d 100644
--- a/arch/blackfin/include/asm/atomic.h
+++ b/arch/blackfin/include/asm/atomic.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ARCH_BLACKFIN_ATOMIC__
 #define __ARCH_BLACKFIN_ATOMIC__
 
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index aef0594e7865..10064f902d20 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -1,29 +1,9 @@
 /*
- * File:         include/asm-blackfin/bfin-global.h
- * Based on:
- * Author: *
- * Created:
- * Description:  Global extern defines for blackfin
+ * Global extern defines for blackfin
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BFIN_GLOBAL_H_
diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
index c281c6328276..ed4f8c6db0cd 100644
--- a/arch/blackfin/include/asm/bfin5xx_spi.h
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
@@ -3,8 +3,6 @@
  *
  * Copyright 2004-2008 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h
index 425ece64fd5e..abdb2af52902 100644
--- a/arch/blackfin/include/asm/bfin_rotary.h
+++ b/arch/blackfin/include/asm/bfin_rotary.h
@@ -1,6 +1,10 @@
 /*
  * board initialization should put one of these structures into platform_data
  * and place the bfin-rotary onto platform_bus named "bfin-rotary".
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BFIN_ROTARY_H
diff --git a/arch/blackfin/include/asm/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h
index fccbb595464a..5248c133bc68 100644
--- a/arch/blackfin/include/asm/bfin_simple_timer.h
+++ b/arch/blackfin/include/asm/bfin_simple_timer.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _bfin_simple_timer_h_
 #define _bfin_simple_timer_h_
 
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index daffa71576d4..a2ff3fb3568d 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_BITOPS_H
 #define _BLACKFIN_BITOPS_H
 
diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h
index 4d4439583396..eb7c1441d8f9 100644
--- a/arch/blackfin/include/asm/blackfin.h
+++ b/arch/blackfin/include/asm/blackfin.h
@@ -1,6 +1,9 @@
 /*
- * Common header file for blackfin family of processors.
+ * Common header file for Blackfin family of processors.
  *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BLACKFIN_H_
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
index 655e49540e41..6f4548a13555 100644
--- a/arch/blackfin/include/asm/bug.h
+++ b/arch/blackfin/include/asm/bug.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_BUG_H
 #define _BLACKFIN_BUG_H
 
diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h
index 3e69106a4d37..9558416d578b 100644
--- a/arch/blackfin/include/asm/byteorder.h
+++ b/arch/blackfin/include/asm/byteorder.h
@@ -1,6 +1 @@
-#ifndef _BLACKFIN_BYTEORDER_H
-#define _BLACKFIN_BYTEORDER_H
-
 #include <linux/byteorder/little_endian.h>
-
-#endif				/* _BLACKFIN_BYTEORDER_H */
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index 477050ad5c53..8542bc31f63c 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -1,6 +1,9 @@
 /*
- * include/asm-blackfin/cache.h
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
+
 #ifndef __ARCH_BLACKFIN_CACHE_H
 #define __ARCH_BLACKFIN_CACHE_H
 
@@ -35,10 +38,10 @@
 
 #if defined(CONFIG_SMP) && \
     !defined(CONFIG_BFIN_CACHE_COHERENT)
-# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
+# if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
 # define __ARCH_SYNC_CORE_ICACHE
 # endif
-# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
+# if defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
 # define __ARCH_SYNC_CORE_DCACHE
 # endif
 #ifndef __ASSEMBLY__
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 7e55549e180f..af03a36c7a4e 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/cacheflush.h
- * Based on:	 include/asm-m68knommu/cacheflush.h
- * Author:       LG Soft India
- *               Copyright (C) 2004 Analog Devices Inc.
- * Created:      Tue Sep 21 2004
- * Description:  Blackfin low-level cache routines adapted from the i386
- * 		 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ * Blackfin low-level cache routines
  *
- * Modified:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BLACKFIN_CACHEFLUSH_H
diff --git a/arch/blackfin/include/asm/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h
index 35f841bce57d..8778e0f03730 100644
--- a/arch/blackfin/include/asm/cdef_LPBlackfin.h
+++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -1,30 +1,8 @@
- /*
-  * File:        include/asm-blackfin/mach-common/cdef_LPBlackfin.h
-  * Based on:
-  * Author:      unknown
-  *              COPYRIGHT 2005 Analog Devices
-  * Created:     ?
-  * Description:
-  *
-  * Modified:
-  *
-  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2, or (at your option)
-  * any later version.
-  *
-  * This program is distributed in the hope that it will be useful,
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-  * along with this program; see the file COPYING.
-  * If not, write to the Free Software Foundation,
-  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-  */
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef _CDEF_LPBLACKFIN_H
 #define _CDEF_LPBLACKFIN_H
diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h
index 793581fc9556..a23415be0de1 100644
--- a/arch/blackfin/include/asm/checksum.h
+++ b/arch/blackfin/include/asm/checksum.h
@@ -1,9 +1,14 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                     akbar.hussain@lineo.com
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_CHECKSUM_H
 #define _BFIN_CHECKSUM_H
 
 /*
- * MODIFIED FOR BFIN April 30, 2001 akbar.hussain@lineo.com
- *
  * computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit)
  *
diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h
index 033bba92d61c..f80dad5ff257 100644
--- a/arch/blackfin/include/asm/clocks.h
+++ b/arch/blackfin/include/asm/clocks.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-common/clocks.h
- * Based on:     include/asm-blackfin/mach-bf537/bf537.h
- * Author:	 Robin Getz <rgetz@blackfin.uclinux.org>
+ * Common Clock definitions for various kernel files
  *
- * Created:      25Jul07
- * Description:  Common Clock definitions for various kernel files
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BFIN_CLOCKS_H
diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index f8a664f022b1..5dffaf582a22 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/context.S
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 /*
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
index d18d16837a6d..fda96261ed62 100644
--- a/arch/blackfin/include/asm/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/cplb.h
- * Based on:     include/asm-blackfin/mach-bf537/bf537.h
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org>
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:      2000
- * Description:  Common CPLB definitions for CPLB init
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CPLB_H
diff --git a/arch/blackfin/include/asm/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h
index 05b14a631d0c..f315c83a015d 100644
--- a/arch/blackfin/include/asm/cplbinit.h
+++ b/arch/blackfin/include/asm/cplbinit.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/cplbinit.h
- * Based on:
- * Author:
+ * Common CPLB definitions for CPLB init
  *
- * Created:
- * Description:
+ * Copyright 2006-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_CPLBINIT_H__
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index fadfa82f93b2..b191dc662bd8 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/include/asm/cpu.h.
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_BLACKFIN_CPU_H
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index 6341eebff3dc..25906468622f 100644
--- a/arch/blackfin/include/asm/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -1,32 +1,10 @@
- /*
-  * File:        include/asm-blackfin/mach-common/def_LPBlackfin.h
-  * Based on:
-  * Author:      unknown
-  *              COPYRIGHT 2005 Analog Devices
-  * Created:     ?
-  * Description:
-  *
-  * Modified:
-  *
-  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2, or (at your option)
-  * any later version.
-  *
-  * This program is distributed in the hope that it will be useful,
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-  * along with this program; see the file COPYING.
-  * If not, write to the Free Software Foundation,
-  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-  */
-
-/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532/33 */
+/*
+ * Blackfin core register bit & address definitions
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or GPL-2 (or later).
+ */
 
 #ifndef _DEF_LPBLACKFIN_H
 #define _DEF_LPBLACKFIN_H
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index ed6b1f3cccce..7a23d824ac96 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_DMA_MAPPING_H
 #define _BLACKFIN_DMA_MAPPING_H
 
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index 96e8208f929a..925e66cb2d49 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -1,9 +1,11 @@
 /*
- * include/asm-blackfin/dpmc.h -  Miscellaneous IOCTL commands for Dynamic Power
- *   			 	Management Controller Driver.
+ * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
+ *
  * Copyright (C) 2004-2008 Analog Device Inc.
  *
+ * Licensed under the GPL-2
  */
+
 #ifndef _BLACKFIN_DPMC_H_
 #define _BLACKFIN_DPMC_H_
 
diff --git a/arch/blackfin/include/asm/early_printk.h b/arch/blackfin/include/asm/early_printk.h
index 53a762b6fcd2..68a910db8864 100644
--- a/arch/blackfin/include/asm/early_printk.h
+++ b/arch/blackfin/include/asm/early_printk.h
@@ -1,27 +1,11 @@
 /*
- * File:         include/asm-blackfin/early_printk.h
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org
+ * function prototpyes for early printk
  *
- * Created:      14Aug2007
- * Description:  function prototpyes for early printk
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2 or later.
  */
 
-
 #ifndef __ASM_EARLY_PRINTK_H__
 #define __ASM_EARLY_PRINTK_H__
 
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index c823e8ebbfa1..8e0764c81eaf 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -1,4 +1,8 @@
-/* Changes made by  LG Soft Oct 2004*/
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef __ASMBFIN_ELF_H
 #define __ASMBFIN_ELF_H
diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h
index 55b808fced71..a6886f6e4819 100644
--- a/arch/blackfin/include/asm/entry.h
+++ b/arch/blackfin/include/asm/entry.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __BFIN_ENTRY_H
 #define __BFIN_ENTRY_H
 
diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/asm/fcntl.h
index 9c4037127857..8727b2b382f1 100644
--- a/arch/blackfin/include/asm/fcntl.h
+++ b/arch/blackfin/include/asm/fcntl.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_FCNTL_H
 #define _BFIN_FCNTL_H
 
diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h
index 32c4d495d847..73fe53e7fd24 100644
--- a/arch/blackfin/include/asm/fixed_code.h
+++ b/arch/blackfin/include/asm/fixed_code.h
@@ -1,5 +1,11 @@
-/* This file defines the fixed addresses where userspace programs can find
-   atomic code sequences.  */
+/*
+ * This file defines the fixed addresses where userspace programs
+ * can find atomic code sequences.
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef __BFIN_ASM_FIXED_CODE_H__
 #define __BFIN_ASM_FIXED_CODE_H__
diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h
index 733a178d782d..c1314c56dd18 100644
--- a/arch/blackfin/include/asm/flat.h
+++ b/arch/blackfin/include/asm/flat.h
@@ -1,8 +1,9 @@
 /*
- * include/asm-blackfin/flat.h -- uClinux flat-format executables
+ * uClinux flat-format executables
  *
- * Copyright (C) 2003,
+ * Copyright 2003-2009 Analog Devices Inc.
  *
+ * Licensed under the GPL-2
  */
 
 #ifndef __BLACKFIN_FLAT_H__
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index fe139619351f..5b44d05ca53e 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/bfin_gpio.h
- * Based on:
- * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ARCH_BLACKFIN_GPIO_H__
diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index 0b78b873df51..c078dd78d998 100644
--- a/arch/blackfin/include/asm/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __BFIN_HARDIRQ_H
 #define __BFIN_HARDIRQ_H
 
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 37053eca200e..d1f5029189a7 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_IO_H
 #define _BFIN_IO_H
 
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 42a15f5ce0d0..e7c0623f9091 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -1,17 +1,10 @@
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2003 HuTao
+ *                2002 Arcturus Networks Inc. (www.arcturusnetworks.com
+ *                       Ted Ma <mated@sympatico.ca>
  *
- * Changed by HuTao Apr18, 2003
- *
- * Copyright was missing when I got the code so took from MIPS arch ...MaTed---
- * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
- * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle
- *
- * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca>
- * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com)
- * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com>
+ * Licensed under the GPL-2
  */
 
 #ifndef _BFIN_IRQ_H_
@@ -19,6 +12,8 @@
 
 #include <linux/irqflags.h>
 
+#include <mach/anomaly.h>
+
 /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
 #include <mach/irq.h>
 
diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h
index 7d9e2d3bbede..7fbe42307b9a 100644
--- a/arch/blackfin/include/asm/irq_handler.h
+++ b/arch/blackfin/include/asm/irq_handler.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _IRQ_HANDLER_H
 #define _IRQ_HANDLER_H
 
diff --git a/arch/blackfin/include/asm/l1layout.h b/arch/blackfin/include/asm/l1layout.h
index 79dbefaa5bef..c87e68647a2b 100644
--- a/arch/blackfin/include/asm/l1layout.h
+++ b/arch/blackfin/include/asm/l1layout.h
@@ -1,6 +1,9 @@
 /*
- * l1layout.h
  * Defines a layout of L1 scratchpad memory that userspace can rely on.
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _L1LAYOUT_H_
diff --git a/arch/blackfin/include/asm/linkage.h b/arch/blackfin/include/asm/linkage.h
index 5a822bb790f7..f7d6d47a048d 100644
--- a/arch/blackfin/include/asm/linkage.h
+++ b/arch/blackfin/include/asm/linkage.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_LINKAGE_H
 #define __ASM_LINKAGE_H
 
diff --git a/arch/blackfin/include/asm/mmu.h b/arch/blackfin/include/asm/mmu.h
index dbfd686360e6..26f6b70b11e2 100644
--- a/arch/blackfin/include/asm/mmu.h
+++ b/arch/blackfin/include/asm/mmu.h
@@ -1,8 +1,13 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2002 David McCullough <davidm@snapgear.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
 #ifndef __MMU_H
 #define __MMU_H
 
-/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
-
 struct sram_list_struct {
 	struct sram_list_struct *next;
 	void *addr;
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index 040410bb07e1..4a3be376ad5b 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/mmu_context.h
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BLACKFIN_MMU_CONTEXT_H__
diff --git a/arch/blackfin/include/asm/module.h b/arch/blackfin/include/asm/module.h
index e3128df139d6..9c1cfffddd9b 100644
--- a/arch/blackfin/include/asm/module.h
+++ b/arch/blackfin/include/asm/module.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _ASM_BFIN_MODULE_H
 #define _ASM_BFIN_MODULE_H
 
diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h
index 5cc641c50834..f726e3a80ad0 100644
--- a/arch/blackfin/include/asm/mutex.h
+++ b/arch/blackfin/include/asm/mutex.h
@@ -4,6 +4,10 @@
  * TODO: implement optimized primitives instead, or leave the generic
  * implementation in place, or pick the atomic_xchg() based generic
  * implementation. (see asm-generic/mutex-xchg.h for details)
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _ASM_MUTEX_H
diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h
index afbaafa793f1..3ae8b569edfc 100644
--- a/arch/blackfin/include/asm/nand.h
+++ b/arch/blackfin/include/asm/nand.h
@@ -1,13 +1,9 @@
-/* linux/include/asm-blackfin/nand.h
- *
- * Copyright (c) 2007 Analog Devices, Inc.
- *	Bryan Wu <bryan.wu@analog.com>
- *
+/*
  * BF5XX - NAND flash controller platfrom_device info
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright 2007-2008 Analog Devices, Inc.
+ *
+ * Licensed under the GPL-2
  */
 
 /* struct bf5xx_nand_platform
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
index 29dcf75c6112..944a07c6cfd6 100644
--- a/arch/blackfin/include/asm/page.h
+++ b/arch/blackfin/include/asm/page.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_PAGE_H
 #define _BLACKFIN_PAGE_H
 
diff --git a/arch/blackfin/include/asm/page_offset.h b/arch/blackfin/include/asm/page_offset.h
index cbaff24b4b25..d06a89b89d20 100644
--- a/arch/blackfin/include/asm/page_offset.h
+++ b/arch/blackfin/include/asm/page_offset.h
@@ -1,5 +1,10 @@
-
-/* This handles the memory map.. */
+/*
+ * This handles the memory map
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifdef CONFIG_BLACKFIN
 #define PAGE_OFFSET_RAW		0x00000000
diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h
index a6f95695731d..d49bb261d9b7 100644
--- a/arch/blackfin/include/asm/pda.h
+++ b/arch/blackfin/include/asm/pda.h
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/include/asm/pda.h
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _ASM_BLACKFIN_PDA_H
diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h
index 783c8f7f8f8c..821c699c2238 100644
--- a/arch/blackfin/include/asm/pgtable.h
+++ b/arch/blackfin/include/asm/pgtable.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_PGTABLE_H
 #define _BLACKFIN_PGTABLE_H
 
@@ -92,6 +98,12 @@ extern unsigned int kobjsize(const void *objp);
 #define	VMALLOC_START	0
 #define	VMALLOC_END	0xffffffff
 
+/* provide a special get_unmapped_area for framebuffer mmaps of nommu */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+					  unsigned long, unsigned long,
+					  unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
 #include <asm-generic/pgtable.h>
 
 #endif				/* _BLACKFIN_PGTABLE_H */
diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/asm/poll.h
index a0556671357b..072d8966c5c3 100644
--- a/arch/blackfin/include/asm/poll.h
+++ b/arch/blackfin/include/asm/poll.h
@@ -1,3 +1,10 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
 #ifndef __BFIN_POLL_H
 #define __BFIN_POLL_H
 
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
index 88eb5c07cc24..edd8ef3a3788 100644
--- a/arch/blackfin/include/asm/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -1,6 +1,9 @@
 /*
- * Common header file for blackfin family of processors.
+ * Common header file for Blackfin family of processors
  *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _PORTMUX_H_
diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h
index 80c9d64eb26c..41bc1875c4d7 100644
--- a/arch/blackfin/include/asm/posix_types.h
+++ b/arch/blackfin/include/asm/posix_types.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ARCH_BFIN_POSIX_TYPES_H
 #define __ARCH_BFIN_POSIX_TYPES_H
 
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index a36ad8dac068..aea880274de7 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_BFIN_PROCESSOR_H
 #define __ASM_BFIN_PROCESSOR_H
 
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index e3f086dc7268..27290c955a7a 100644
--- a/arch/blackfin/include/asm/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_PTRACE_H
 #define _BFIN_PTRACE_H
 
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index ae4dae1e370b..1f5381fbb4a7 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_SECTIONS_H
 #define _BLACKFIN_SECTIONS_H
 
diff --git a/arch/blackfin/include/asm/segment.h b/arch/blackfin/include/asm/segment.h
index 02cfd09b5a99..f8e1984ffc7e 100644
--- a/arch/blackfin/include/asm/segment.h
+++ b/arch/blackfin/include/asm/segment.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_SEGMENT_H
 #define _BFIN_SEGMENT_H
 
diff --git a/arch/blackfin/include/asm/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h
index ce00b03c2775..ce4081a4d815 100644
--- a/arch/blackfin/include/asm/sigcontext.h
+++ b/arch/blackfin/include/asm/sigcontext.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _ASM_BLACKFIN_SIGCONTEXT_H
 #define _ASM_BLACKFIN_SIGCONTEXT_H
 
diff --git a/arch/blackfin/include/asm/siginfo.h b/arch/blackfin/include/asm/siginfo.h
index eca4565cea37..3e81306394e2 100644
--- a/arch/blackfin/include/asm/siginfo.h
+++ b/arch/blackfin/include/asm/siginfo.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_SIGINFO_H
 #define _BFIN_SIGINFO_H
 
diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h
index 118deeeae7c0..6a0fe94b84a6 100644
--- a/arch/blackfin/include/asm/smp.h
+++ b/arch/blackfin/include/asm/smp.h
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/include/asm/smp.h
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                          Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_BLACKFIN_SMP_H
diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h
index d6ff4b59fcb1..b0c7f0ee4b03 100644
--- a/arch/blackfin/include/asm/spinlock.h
+++ b/arch/blackfin/include/asm/spinlock.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __BFIN_SPINLOCK_H
 #define __BFIN_SPINLOCK_H
 
diff --git a/arch/blackfin/include/asm/spinlock_types.h b/arch/blackfin/include/asm/spinlock_types.h
index b1e3c4c7b382..be75762c0610 100644
--- a/arch/blackfin/include/asm/spinlock_types.h
+++ b/arch/blackfin/include/asm/spinlock_types.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_SPINLOCK_TYPES_H
 #define __ASM_SPINLOCK_TYPES_H
 
diff --git a/arch/blackfin/include/asm/stat.h b/arch/blackfin/include/asm/stat.h
index d2b6f11ec231..2e27665c4e91 100644
--- a/arch/blackfin/include/asm/stat.h
+++ b/arch/blackfin/include/asm/stat.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
 #ifndef _BFIN_STAT_H
 #define _BFIN_STAT_H
 
diff --git a/arch/blackfin/include/asm/string.h b/arch/blackfin/include/asm/string.h
index 321f4d96e4ae..d7f0ccb418c3 100644
--- a/arch/blackfin/include/asm/string.h
+++ b/arch/blackfin/include/asm/string.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_STRING_H_
 #define _BLACKFIN_STRING_H_
 
diff --git a/arch/blackfin/include/asm/swab.h b/arch/blackfin/include/asm/swab.h
index d442113de515..89de6507ca2b 100644
--- a/arch/blackfin/include/asm/swab.h
+++ b/arch/blackfin/include/asm/swab.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_SWAB_H
 #define _BLACKFIN_SWAB_H
 
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
index 85e8f16cf8c2..dde19b1d25f5 100644
--- a/arch/blackfin/include/asm/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -1,34 +1,8 @@
 /*
- * File:        include/asm/system.h
- * Based on:
- * Author:      Tony Kou (tonyko@lineo.ca)
- *              Copyright (c) 2002 Arcturus Networks Inc.
- *                    (www.arcturusnetworks.com)
- *              Copyright (c) 2003 Metrowerks (www.metrowerks.com)
- *              Copyright (c) 2004 Analog Device Inc.
- * Created:     25Jan2001 - Tony Kou
- * Description: system.h include file
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               Tony Kou (tonyko@lineo.ca)
  *
- * Modified:     22Sep2006 - Robin Getz
- *                - move include blackfin.h down, so I can get access to
- *                   irq functions in other include files.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BLACKFIN_SYSTEM_H
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 2bbfdd950afc..afb3a8626380 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -1,27 +1,7 @@
 /*
- * File:         include/asm-blackfin/thread_info.h
- * Based on:     include/asm-m68knommu/thread_info.h
- * Author:       LG Soft India
- *               Copyright (C) 2004-2005 Analog Devices Inc.
- * Created:      Tue Sep 21 2004
- * Description:  Blackfin low-level thread information
- * Modified:
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _ASM_THREAD_INFO_H
diff --git a/arch/blackfin/include/asm/tlb.h b/arch/blackfin/include/asm/tlb.h
index 89a12ee916d8..a74ae08af1a7 100644
--- a/arch/blackfin/include/asm/tlb.h
+++ b/arch/blackfin/include/asm/tlb.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_TLB_H
 #define _BLACKFIN_TLB_H
 
diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h
index 312b596b9731..609ad3c84189 100644
--- a/arch/blackfin/include/asm/trace.h
+++ b/arch/blackfin/include/asm/trace.h
@@ -1,6 +1,9 @@
 /*
- * Common header file for blackfin family of processors.
+ * header file for hardware trace functions
  *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BLACKFIN_TRACE_
diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h
index 3cdc454cde23..9fe0da612c09 100644
--- a/arch/blackfin/include/asm/traps.h
+++ b/arch/blackfin/include/asm/traps.h
@@ -1,13 +1,10 @@
 /*
- *  linux/include/asm/traps.h
+ *  Copyright 2004-2009 Analog Devices Inc.
+ *                 2001 Lineo, Inc
+ *                        Tony Kou
+ *                 1993 Hamish Macdonald
  *
- *  Copyright (C) 1993        Hamish Macdonald
- *
- *  Lineo, Inc    Jul 2001    Tony Kou
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
+ * Licensed under the GPL-2
  */
 
 #ifndef _BFIN_TRAPS_H
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index 2f469a1f80fb..c03b8532aad3 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -1,4 +1,7 @@
-/* Changes made by Lineo Inc.    May 2001
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  *
  * Based on: include/asm-m68knommu/uaccess.h
  */
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index 02b1529dad57..779be02a910a 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_BFIN_UNISTD_H
 #define __ASM_BFIN_UNISTD_H
 /*
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
index f05d1b99b0ef..bd32c09b9349 100644
--- a/arch/blackfin/kernel/asm-offsets.c
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/kernel/asm-offsets.c
- * Based on:
- * Author:
+ * generate definitions needed by assembly language modules
  *
- * Created:
- * Description:  generate definitions needed by assembly language modules.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/stddef.h>
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 384868dedac3..1f170216d2f9 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -2,6 +2,7 @@
  * bfin_dma_5xx.c - Blackfin DMA implementation
  *
  * Copyright 2004-2008 Analog Devices Inc.
+ *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index fc4681c0170e..22705eeff34f 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/kernel/bfin_gpio.c
- * Based on:
- * Author:       Michael Hennerich (hennerich@blackfin.uclinux.org)
+ * GPIO Abstraction Layer
  *
- * Created:
- * Description:  GPIO Abstraction Layer
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/delay.h>
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index 36193eed9a1f..f7b9cdce8239 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -1,25 +1,11 @@
 /*
  * Blackfin CPLB initialization
  *
- *               Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 8e1e9e9e9632..69e0e530d70f 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -1,22 +1,11 @@
 /*
- *               Blackfin CPLB exception handling.
- *               Copyright 2004-2007 Analog Devices Inc.
+ * Blackfin CPLB exception handling for when MPU in on
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 #include <linux/mm.h>
 
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 5d8ad503f82a..fd9a2f31e686 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -1,24 +1,9 @@
 /*
  * Blackfin CPLB initialization
  *
- *               Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
index d9ea46c6e41a..5b88861d6183 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
@@ -1,26 +1,14 @@
 /*
- * File:         arch/blackfin/kernel/cplb-nompu-c/cplbmgr.c
  * Based on:     arch/blackfin/kernel/cplb-mpu/cplbmgr.c
  * Author:       Michael McTernan <mmcternan@airvana.com>
  *
- * Created:      01Nov2008
  * Description:  CPLB miss handler.
  *
  * Modified:
  *               Copyright 2008 Airvana Inc.
- *               Copyright 2004-2007 Analog Devices Inc.
+ *               Copyright 2008-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/kernel.h>
diff --git a/arch/blackfin/kernel/cplbinfo.c b/arch/blackfin/kernel/cplbinfo.c
index 64d78300dd08..0bdaa517a501 100644
--- a/arch/blackfin/kernel/cplbinfo.c
+++ b/arch/blackfin/kernel/cplbinfo.c
@@ -2,6 +2,7 @@
  * arch/blackfin/kernel/cplbinfo.c - display CPLB status
  *
  * Copyright 2004-2008 Analog Devices Inc.
+ *
  * Licensed under the GPL-2 or later.
  */
 
@@ -111,24 +112,21 @@ static const struct seq_operations cplbinfo_sops = {
 	.show  = cplbinfo_show,
 };
 
+#define CPLBINFO_DCPLB_FLAG 0x80000000
+
 static int cplbinfo_open(struct inode *inode, struct file *file)
 {
-	char buf[256], *path, *p;
+	struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
+	char cplb_type;
 	unsigned int cpu;
-	char *s_cpu, *s_cplb;
 	int ret;
 	struct seq_file *m;
 	struct cplbinfo_data *cdata;
 
-	path = d_path(&file->f_path, buf, sizeof(buf));
-	if (IS_ERR(path))
-		return PTR_ERR(path);
-	s_cpu = strstr(path, "/cpu");
-	s_cplb = strrchr(path, '/');
-	if (!s_cpu || !s_cplb)
-		return -EINVAL;
+	cpu = (unsigned int)pde->data;
+	cplb_type = cpu & CPLBINFO_DCPLB_FLAG ? 'D' : 'I';
+	cpu &= ~CPLBINFO_DCPLB_FLAG;
 
-	cpu = simple_strtoul(s_cpu + 4, &p, 10);
 	if (!cpu_online(cpu))
 		return -ENODEV;
 
@@ -139,7 +137,7 @@ static int cplbinfo_open(struct inode *inode, struct file *file)
 	cdata = m->private;
 
 	cdata->pos = 0;
-	cdata->cplb_type = toupper(s_cplb[1]);
+	cdata->cplb_type = cplb_type;
 	cplbinfo_seq_init(cdata, cpu);
 
 	return 0;
@@ -168,8 +166,10 @@ static int __init cplbinfo_init(void)
 		if (!cpu_dir)
 			return -ENOMEM;
 
-		proc_create("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops);
-		proc_create("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops);
+		proc_create_data("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
+			(void *)cpu);
+		proc_create_data("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
+			(void *)(cpu | CPLBINFO_DCPLB_FLAG));
 	}
 
 	return 0;
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index 2f62a9f4058a..e74e74d7733f 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/kernel/dma-mapping.c
- * Based on:
- * Author:
+ * Dynamic DMA mapping support
  *
- * Created:
- * Description:  Dynamic DMA mapping support.
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/types.h>
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index 931c78b5ea1f..84ed8375113c 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -1,25 +1,10 @@
 /*
- * File:         arch/blackfin/kernel/early_printk.c
- * Based on:     arch/x86_64/kernel/early_printk.c
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org
+ * allow a console to be used for early printk
+ * derived from arch/x86/kernel/early_printk.c
  *
- * Created:      14Aug2007
- * Description:  allow a console to be used for early printk
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2
  */
 
 #include <linux/kernel.h>
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 3f8769b7db54..f27dc2292e1b 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/entry.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
index 0d2d9e0968c8..0565917f23ba 100644
--- a/arch/blackfin/kernel/fixed_code.S
+++ b/arch/blackfin/kernel/fixed_code.S
@@ -6,7 +6,12 @@
  * These are aligned to 16 bytes, so that we have some space to replace
  * these sequences with something else (e.g. kernel traps if we ever do
  * BF561 SMP).
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/unistd.h>
diff --git a/arch/blackfin/kernel/flat.c b/arch/blackfin/kernel/flat.c
index d188b2430536..a88daddbf074 100644
--- a/arch/blackfin/kernel/flat.c
+++ b/arch/blackfin/kernel/flat.c
@@ -1,21 +1,7 @@
 /*
- *  arch/blackfin/kernel/flat.c
+ * Copyright 2007 Analog Devices Inc.
  *
- *  Copyright (C) 2007 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Licensed under the GPL-2.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index c26c34de9f3c..118c5b9dedac 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/init_task.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/mm.h>
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 4b5fd36187d9..db9f9c91f11f 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/irqchip.c
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/kernel_stat.h>
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 67fc7a56c865..a6dfa6b71e63 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/module.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #define pr_fmt(fmt) "module %s: " fmt
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index f5b286189647..430ae39456e8 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/kernel/process.c
- * Based on:
- * Author:
+ * Blackfin architecture-dependent process handling
  *
- * Created:
- * Description:  Blackfin architecture-dependent process handling.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 30f4828277ad..0982b5d5af10 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -1,30 +1,8 @@
 /*
- * File:         arch/blackfin/kernel/ptrace.c
- * Based on:     Taken from linux/kernel/ptrace.c
- * Author:       linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ * these modifications are Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:      1/23/92
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2
  */
 
 #include <linux/kernel.h>
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 369535b61ed1..c202a44d1416 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -1,9 +1,5 @@
 /*
- * arch/blackfin/kernel/setup.c
- *
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2009 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/kernel/shadow_console.c b/arch/blackfin/kernel/shadow_console.c
index 8b8c7107a162..557e9fef406a 100644
--- a/arch/blackfin/kernel/shadow_console.c
+++ b/arch/blackfin/kernel/shadow_console.c
@@ -4,8 +4,6 @@
  *
  * Copyright 2009 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index dbc3bbf846be..9d90c18fab23 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/signal.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/signal.h>
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index 3da60fb13ce4..afcef129d4e8 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -1,32 +1,10 @@
 /*
- * File:         arch/blackfin/kernel/sys_bfin.c
- * Based on:
- * Author:
+ * contains various random system calls that have a non-standard
+ * calling sequence on the Linux/Blackfin platform.
  *
- * Created:
- * Description:  This file contains various random system calls that
- *               have a non-standard calling sequence on the Linux/bfin
- *               platform.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/spinlock.h>
@@ -91,3 +69,14 @@ asmlinkage void *sys_dma_memcpy(void *dest, const void *src, size_t len)
 {
 	return safe_dma_memcpy(dest, src, len);
 }
+
+#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
+#include <linux/fb.h>
+unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
+	unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+	struct fb_info *info = filp->private_data;
+	return (unsigned long)info->screen_base;
+}
+EXPORT_SYMBOL(get_fb_unmapped_area);
+#endif
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index f9715764383e..359cfb1815ca 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -1,13 +1,13 @@
 /*
- * linux/arch/kernel/time-ts.c
- *
  * Based on arm clockevents implementation and old bfin time tick.
  *
- * Copyright(C) 2008, GeoTechnologies, Vitja Makarov
+ * Copyright 2008-2009 Analog Devics Inc.
+ *                2008 GeoTechnologies
+ *                     Vitja Makarov
  *
- * This code is licenced under the GPL version 2. For details see
- * kernel-base/COPYING.
+ * Licensed under the GPL-2
  */
+
 #include <linux/module.h>
 #include <linux/profile.h>
 #include <linux/interrupt.h>
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index adb54aa7d7c8..bd3b53da295e 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -14,6 +14,7 @@
 #include <linux/time.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 
 #include <asm/blackfin.h>
 #include <asm/time.h>
@@ -81,11 +82,11 @@ time_sched_init(irqreturn_t(*timer_routine) (int, void *))
 #endif
 }
 
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 /*
  * Should return useconds since last timer tick
  */
-#ifndef CONFIG_GENERIC_TIME
-static unsigned long gettimeoffset(void)
+u32 arch_gettimeoffset(void)
 {
 	unsigned long offset;
 	unsigned long clocks_per_jiffy;
@@ -184,65 +185,6 @@ void __init time_init(void)
 	time_sched_init(timer_interrupt);
 }
 
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = gettimeoffset();
-		sec = xtime.tv_sec;
-		usec += (xtime.tv_nsec / NSEC_PER_USEC);
-	}
-	while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	while (usec >= USEC_PER_SEC) {
-		usec -= USEC_PER_SEC;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set the xtime.tv_usec
-	 * correctly. However, the value in this location is
-	 * is value at the last tick.
-	 * Discover what correction gettimeofday
-	 * would have done, and then undo it!
-	 */
-	nsec -= (gettimeoffset() * NSEC_PER_USEC);
-
-	wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-
-	return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
-
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 56464cb8edf3..6b7325d634af 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/traps.c
- * Based on:
- * Author:       Hamish Macdonald
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  uses S/W interrupt 15 for the system calls
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/bug.h>
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index ffd90fbbc8f9..10e12539000e 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/vmlinux.lds.S
- * Based on:     none - original work
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:      Tue Sep 21 2004
- * Description:  Master linker script for blackfin architecture
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #define VMLINUX_SYMBOL(_sym_) _##_sym_
diff --git a/arch/blackfin/lib/ashldi3.c b/arch/blackfin/lib/ashldi3.c
index a8c279e9b192..ab69d8768afc 100644
--- a/arch/blackfin/lib/ashldi3.c
+++ b/arch/blackfin/lib/ashldi3.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/ashldi3.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include "gcclib.h"
diff --git a/arch/blackfin/lib/ashrdi3.c b/arch/blackfin/lib/ashrdi3.c
index a0d3419329ca..b5b351e82e10 100644
--- a/arch/blackfin/lib/ashrdi3.c
+++ b/arch/blackfin/lib/ashrdi3.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/ashrdi3.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include "gcclib.h"
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
index cd605e7d8518..c62969dc1bbb 100644
--- a/arch/blackfin/lib/checksum.c
+++ b/arch/blackfin/lib/checksum.c
@@ -1,32 +1,12 @@
 /*
- * File:         arch/blackfin/lib/checksum.c
- * Based on:     none - original work
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  An implementation of the TCP/IP protocol suite for the LINUX
- *               operating system.  INET is implemented using the  BSD Socket
- *               interface as the means of communication with the user level.
+ * Licensed under the GPL-2 or later.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ * An implementation of the TCP/IP protocol suite for the LINUX operating
+ * system. INET is implemented using the BSD Socket interface as the
+ * means of communication with the user level.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/lib/divsi3.S b/arch/blackfin/lib/divsi3.S
index 2ac59c70dd94..f89c5a49c47b 100644
--- a/arch/blackfin/lib/divsi3.S
+++ b/arch/blackfin/lib/divsi3.S
@@ -1,10 +1,9 @@
 /*
- * File:         arch/blackfin/lib/divsi3.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  16 / 32 bit signed division.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ *
+ * 16 / 32 bit signed division.
  *                 Special cases :
  *                      1)  If(numerator == 0)
  *                             return 0
@@ -22,25 +21,6 @@
  *                                   R0 - Quotient    (o)
  *                 Registers Used : R2-R7,P0-P2
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 .global   ___divsi3;
diff --git a/arch/blackfin/lib/gcclib.h b/arch/blackfin/lib/gcclib.h
index 9ccd39a135ee..724f07f14f8d 100644
--- a/arch/blackfin/lib/gcclib.h
+++ b/arch/blackfin/lib/gcclib.h
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/gcclib.h
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #define BITS_PER_UNIT  8
diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c
index e57bf6fbdf3f..53f1741047e5 100644
--- a/arch/blackfin/lib/lshrdi3.c
+++ b/arch/blackfin/lib/lshrdi3.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/lshrdi3.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include "gcclib.h"
diff --git a/arch/blackfin/lib/memchr.S b/arch/blackfin/lib/memchr.S
index 5da428134d32..542e40f8775f 100644
--- a/arch/blackfin/lib/memchr.S
+++ b/arch/blackfin/lib/memchr.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/memchr.S
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S
index 219fa2877c62..ce5b9f1a8267 100644
--- a/arch/blackfin/lib/memcmp.S
+++ b/arch/blackfin/lib/memcmp.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/memcmp.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S
index e654a18a0754..c31bf22aab19 100644
--- a/arch/blackfin/lib/memcpy.S
+++ b/arch/blackfin/lib/memcpy.S
@@ -1,36 +1,13 @@
 /*
- * File:         arch/blackfin/lib/memcpy.S
- * Based on:
- * Author:
+ * internal version of memcpy(), issued by the compiler to copy blocks of
+ * data around. This is really memmove() - it has to be able to deal with
+ * possible overlaps, because that ambiguity is when the compiler gives up
+ * and calls a function. We have our own, internal version so that we get
+ * something we trust, even if the user has redefined the normal symbol.
  *
- * Created:
- * Description:  internal version of memcpy(), issued by the compiler
- *               to copy blocks of data around.
- *               This is really memmove() - it has to be able to deal with
- *               possible overlaps, because that ambiguity is when the compiler
- *               gives up and calls a function. We have our own, internal version
- *               so that we get something we trust, even if the user has redefined
- *               the normal symbol.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S
index 33f8653145b7..80c240acac60 100644
--- a/arch/blackfin/lib/memmove.S
+++ b/arch/blackfin/lib/memmove.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/memmove.S
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S
index 8159136a29ea..c30d99b10969 100644
--- a/arch/blackfin/lib/memset.S
+++ b/arch/blackfin/lib/memset.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/memset.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/modsi3.S b/arch/blackfin/lib/modsi3.S
index ca1dd3973b39..8b0c7d4052af 100644
--- a/arch/blackfin/lib/modsi3.S
+++ b/arch/blackfin/lib/modsi3.S
@@ -1,36 +1,12 @@
 /*
- * File:         arch/blackfin/lib/modsi3.S
- * Based on:
- * Author:
+ * This program computes 32 bit signed remainder. It calls div32 function
+ * for quotient estimation.
+ *   Registers in:  R0, R1 = Numerator/ Denominator
+ *   Registers out: R0     = Remainder
  *
- * Created:
- * Description:  This program computes 32 bit signed remainder. It calls div32 function
- *               for quotient estimation.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- *               Registers used :
- *               Numerator/ Denominator in  R0, R1
- *                 R0  -  returns remainder.
- *                 R2-R7
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 .global ___modsi3;
diff --git a/arch/blackfin/lib/muldi3.S b/arch/blackfin/lib/muldi3.S
index abde120ee230..953a38a1d1d1 100644
--- a/arch/blackfin/lib/muldi3.S
+++ b/arch/blackfin/lib/muldi3.S
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
 .align 2
 .global ___muldi3;
 .type ___muldi3, STT_FUNC;
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
index 4685b7aa0080..250f4d4b9436 100644
--- a/arch/blackfin/lib/outs.S
+++ b/arch/blackfin/lib/outs.S
@@ -1,30 +1,11 @@
 /*
- * File:         arch/blackfin/lib/outs.S
- * Based on:
- * Author:       Bas Vermeulen <bas@buyways.nl>
+ * Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
  *
- * Created:      Tue Mar 22 15:27:24 CEST 2005
- * Description:  Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
+ * Copyright 2005-2009 Analog Devices Inc.
+ *                2005 BuyWays BV
+ *                      Bas Vermeulen <bas@buyways.nl>
  *
- * Modified:     Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/smulsi3_highpart.S b/arch/blackfin/lib/smulsi3_highpart.S
index e383cd3eca5d..99ee8c5de38b 100644
--- a/arch/blackfin/lib/smulsi3_highpart.S
+++ b/arch/blackfin/lib/smulsi3_highpart.S
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
 .align 2
 .global ___smulsi3_highpart;
 .type ___smulsi3_highpart, STT_FUNC;
diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S
index 58fd96d74766..97e904315ec6 100644
--- a/arch/blackfin/lib/udivsi3.S
+++ b/arch/blackfin/lib/udivsi3.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/udivsi3.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/umodsi3.S b/arch/blackfin/lib/umodsi3.S
index 4f2b76ee7626..168eba7c64c8 100644
--- a/arch/blackfin/lib/umodsi3.S
+++ b/arch/blackfin/lib/umodsi3.S
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/lib/umodsi3.S
- * Based on:
- * Author:
+ * libgcc1 routines for Blackfin 5xx
  *
- * Created:
- * Description:  libgcc1 routines for Blackfin 5xx
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifdef CONFIG_ARITHMETIC_OPS_L1
diff --git a/arch/blackfin/lib/umulsi3_highpart.S b/arch/blackfin/lib/umulsi3_highpart.S
index 67b799351e3e..051824a6ed00 100644
--- a/arch/blackfin/lib/umulsi3_highpart.S
+++ b/arch/blackfin/lib/umulsi3_highpart.S
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
 .align 2
 .global ___umulsi3_highpart;
 .type ___umulsi3_highpart, STT_FUNC;
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 03e4a9941f01..01975c017116 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf518/boards/ezbrd.c
- * Based on:     arch/blackfin/mach-bf527/boards/ezbrd.c
- * Author:       Bryan Wu <cooloney@kernel.org>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -571,19 +549,6 @@ static struct platform_device bf51x_sdh_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_100, 400000000),
@@ -660,8 +625,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezbrd_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init ezbrd_init(void)
diff --git a/arch/blackfin/mach-bf518/dma.c b/arch/blackfin/mach-bf518/dma.c
index 698e88ca5104..78b43605a0b5 100644
--- a/arch/blackfin/mach-bf518/dma.c
+++ b/arch/blackfin/mach-bf518/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf518/dma.c
- * Based on:
- * Author:       Bryan Wu <cooloney@kernel.org>
+ * the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf518/include/mach/bf518.h b/arch/blackfin/mach-bf518/include/mach/bf518.h
index 78da1a07ee73..856b330ecf0b 100644
--- a/arch/blackfin/mach-bf518/include/mach/bf518.h
+++ b/arch/blackfin/mach-bf518/include/mach/bf518.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/bf518.h
- * Based on:	include/asm-blackfin/mach-bf527/bf527.h
- * Author:	Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF518
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF518_H__
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index dbade93395eb..970d310021e7 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf518/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *	blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index 83421d393148..6cfb246aebec 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h
index 820c13c4daaa..493020d0a65a 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefbf512.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _CDEF_BF512_H
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
index dfe492dfe54e..e1d99911025d 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefbf514.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF514_H
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
index 14df43d4677a..6b364eda4947 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefbf516.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF516_H
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
index bafb370cfb3c..929b90650bd4 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefbf518.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF518_H
@@ -211,6 +186,47 @@
 #define bfin_read_EMAC_TXC_ABORT()		bfin_read32(EMAC_TXC_ABORT)
 #define bfin_write_EMAC_TXC_ABORT(val)		bfin_write32(EMAC_TXC_ABORT, val)
 
+#define bfin_read_EMAC_PTP_CTL()                bfin_read16(EMAC_PTP_CTL)
+#define bfin_write_EMAC_PTP_CTL(val)            bfin_write16(EMAC_PTP_CTL, val)
+#define bfin_read_EMAC_PTP_IE()                 bfin_read16(EMAC_PTP_IE)
+#define bfin_write_EMAC_PTP_IE(val)             bfin_write16(EMAC_PTP_IE, val)
+#define bfin_read_EMAC_PTP_ISTAT()              bfin_read16(EMAC_PTP_ISTAT)
+#define bfin_write_EMAC_PTP_ISTAT(val)          bfin_write16(EMAC_PTP_ISTAT, val)
+#define bfin_read_EMAC_PTP_FOFF()               bfin_read32(EMAC_PTP_FOFF)
+#define bfin_write_EMAC_PTP_FOFF(val)           bfin_write32(EMAC_PTP_FOFF, val)
+#define bfin_read_EMAC_PTP_FV1()                bfin_read32(EMAC_PTP_FV1)
+#define bfin_write_EMAC_PTP_FV1(val)            bfin_write32(EMAC_PTP_FV1, val)
+#define bfin_read_EMAC_PTP_FV2()                bfin_read32(EMAC_PTP_FV2)
+#define bfin_write_EMAC_PTP_FV2(val)            bfin_write32(EMAC_PTP_FV2, val)
+#define bfin_read_EMAC_PTP_FV3()                bfin_read32(EMAC_PTP_FV3)
+#define bfin_write_EMAC_PTP_FV3(val)            bfin_write32(EMAC_PTP_FV3, val)
+#define bfin_read_EMAC_PTP_ADDEND()             bfin_read32(EMAC_PTP_ADDEND)
+#define bfin_write_EMAC_PTP_ADDEND(val)         bfin_write32(EMAC_PTP_ADDEND, val)
+#define bfin_read_EMAC_PTP_ACCR()               bfin_read32(EMAC_PTP_ACCR)
+#define bfin_write_EMAC_PTP_ACCR(val)           bfin_write32(EMAC_PTP_ACCR, val)
+#define bfin_read_EMAC_PTP_OFFSET()             bfin_read32(EMAC_PTP_OFFSET)
+#define bfin_write_EMAC_PTP_OFFSET(val)         bfin_write32(EMAC_PTP_OFFSET, val)
+#define bfin_read_EMAC_PTP_TIMELO()             bfin_read32(EMAC_PTP_TIMELO)
+#define bfin_write_EMAC_PTP_TIMELO(val)         bfin_write32(EMAC_PTP_TIMELO, val)
+#define bfin_read_EMAC_PTP_TIMEHI()             bfin_read32(EMAC_PTP_TIMEHI)
+#define bfin_write_EMAC_PTP_TIMEHI(val)         bfin_write32(EMAC_PTP_TIMEHI, val)
+#define bfin_read_EMAC_PTP_RXSNAPLO()           bfin_read32(EMAC_PTP_RXSNAPLO)
+#define bfin_read_EMAC_PTP_RXSNAPHI()           bfin_read32(EMAC_PTP_RXSNAPHI)
+#define bfin_read_EMAC_PTP_TXSNAPLO()           bfin_read32(EMAC_PTP_TXSNAPLO)
+#define bfin_read_EMAC_PTP_TXSNAPHI()           bfin_read32(EMAC_PTP_TXSNAPHI)
+#define bfin_read_EMAC_PTP_ALARMLO()            bfin_read32(EMAC_PTP_ALARMLO)
+#define bfin_write_EMAC_PTP_ALARMLO(val)        bfin_write32(EMAC_PTP_ALARMLO, val)
+#define bfin_read_EMAC_PTP_ALARMHI()            bfin_read32(EMAC_PTP_ALARMHI)
+#define bfin_write_EMAC_PTP_ALARMHI(val)        bfin_write32(EMAC_PTP_ALARMHI, val)
+#define bfin_read_EMAC_PTP_ID_OFF()             bfin_read16(EMAC_PTP_ID_OFF)
+#define bfin_write_EMAC_PTP_ID_OFF(val)         bfin_write16(EMAC_PTP_ID_OFF, val)
+#define bfin_read_EMAC_PTP_ID_SNAP()            bfin_read32(EMAC_PTP_ID_SNAP)
+#define bfin_write_EMAC_PTP_ID_SNAP(val)        bfin_write32(EMAC_PTP_ID_SNAP, val)
+#define bfin_read_EMAC_PTP_PPS_STARTHI()        bfin_read32(EMAC_PTP_PPS_STARTHI)
+#define bfin_write_EMAC_PTP_PPS_STARTHI(val)    bfin_write32(EMAC_PTP_PPS_STARTHI, val)
+#define bfin_read_EMAC_PTP_PPS_PERIOD()         bfin_read32(EMAC_PTP_PPS_PERIOD)
+#define bfin_write_EMAC_PTP_PPS_PERIOD(val)     bfin_write32(EMAC_PTP_PPS_PERIOD, val)
+
 /* Removable Storage Interface Registers */
 
 #define bfin_read_RSI_PWR_CTL()        bfin_read16(RSI_PWR_CONTROL)
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
index ee3d4733369c..1d970df7aee9 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefBF51x_base.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF52X_H
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF512.h b/arch/blackfin/mach-bf518/include/mach/defBF512.h
index a96ca90154dd..9b505bb0cb2d 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF512.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF512.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF512.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF512_H
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index 56ee5a7c2007..b5adca23a788 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF514.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF514_H
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF516.h b/arch/blackfin/mach-bf518/include/mach/defBF516.h
index dfc93843517d..7eb18774d727 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF516.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF516.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF516_H
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF518.h b/arch/blackfin/mach-bf518/include/mach/defBF518.h
index 6e982abf4ede..794cf06eb5ba 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF518.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF518.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF518.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF518_H
@@ -648,4 +624,32 @@
 
 #define                       RWR  0x1        /* Read Wait Request */
 
+/* Bit masks for EMAC_PTP_CTL */
+
+#define                    PTP_EN  0x1        /* Enable the PTP_TSYNC module */
+#define                        TL  0x2        /* Timestamp lock control */
+#define                      ASEN  0x10       /* Auxiliary snapshot control */
+#define                     PPSEN  0x80       /* Pulse-per-second (PPS) control */
+#define                     CKOEN  0x2000     /* Clock output control */
+
+/* Bit masks for EMAC_PTP_IE */
+
+#define                      ALIE  0x1        /* Alarm interrupt enable */
+#define                     RXEIE  0x2        /* Receive event interrupt enable */
+#define                     RXGIE  0x4        /* Receive general interrupt enable */
+#define                      TXIE  0x8        /* Transmit interrupt enable */
+#define                     RXOVE  0x10       /* Receive overrun error interrupt enable */
+#define                     TXOVE  0x20       /* Transmit overrun error interrupt enable */
+#define                      ASIE  0x40       /* Auxiliary snapshot interrupt enable */
+
+/* Bit masks for EMAC_PTP_ISTAT */
+
+#define                       ALS  0x1        /* Alarm status */
+#define                      RXEL  0x2        /* Receive event interrupt status */
+#define                      RXGL  0x4        /* Receive general interrupt status */
+#define                      TXTL  0x8        /* Transmit snapshot status */
+#define                      RXOV  0x10       /* Receive snapshot overrun status */
+#define                      TXOV  0x20       /* Transmit snapshot overrun status */
+#define                       ASL  0x40       /* Auxiliary snapshot interrupt status */
+
 #endif /* _DEF_BF518_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index 1bec8d1c2a73..e06f4112c695 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF51x_base.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF51X_H
diff --git a/arch/blackfin/mach-bf518/include/mach/gpio.h b/arch/blackfin/mach-bf518/include/mach/gpio.h
index 9757683c3948..bbab2d76499c 100644
--- a/arch/blackfin/mach-bf518/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf518/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf518/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf518/include/mach/irq.h b/arch/blackfin/mach-bf518/include/mach/irq.h
index 3ff0f093313d..14e52ec7afa5 100644
--- a/arch/blackfin/mach-bf518/include/mach/irq.h
+++ b/arch/blackfin/mach-bf518/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:	include/asm-blackfin/mach-bf518/irq.h
- * based on:	include/asm-blackfin/mach-bf527/irq.h
- * author:	Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2008 Analog Devices Inc.
  *
- * created:
- * description:
- *	system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BF518_IRQ_H_
diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h
index a0fc77fd3315..e352910f7f99 100644
--- a/arch/blackfin/mach-bf518/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf518/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf518/ints-priority.c b/arch/blackfin/mach-bf518/ints-priority.c
index 3151fd5501ca..bb05bef34ec0 100644
--- a/arch/blackfin/mach-bf518/ints-priority.c
+++ b/arch/blackfin/mach-bf518/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf518/ints-priority.c
- * Based on:     arch/blackfin/mach-bf527/ints-priority.c
- * Author:       Bryan Wu <cooloney@kernel.org>
+ * Set up the interrupt priorities
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 08a3f01c9886..f1996b13a3da 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf527/boards/cm-bf527.c
- * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -616,12 +595,6 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-	.name = "bfin-adv7393",
-};
-#endif
-
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
 	{
@@ -786,6 +759,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = IRQ_PF8,
 	},
 #endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -821,19 +799,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_100, 400000000),
@@ -909,10 +874,6 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 	&bfin_spi0_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-	&bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 	&bfin_uart_device,
 #endif
@@ -942,8 +903,6 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 	&cm_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init cm_init(void)
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 68b4c804364c..cad23b15d83c 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf527/boards/ezbrd.c
- * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -611,19 +589,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_100, 400000000),
@@ -732,8 +697,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezbrd_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init ezbrd_init(void)
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 2849b09abe99..f09665f74ba0 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf527/boards/ezkit.c
- * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -716,12 +694,6 @@ static struct platform_device bfin_fb_device = {
 };
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-	.name = "bfin-adv7393",
-};
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -837,6 +809,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = IRQ_PF8,
 	},
 #endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -905,19 +882,6 @@ static struct platform_device bfin_rotary_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_100, 400000000),
@@ -1001,10 +965,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bf52x_t350mcqb_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-	&bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 	&bfin_uart_device,
 #endif
@@ -1038,8 +998,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init ezkit_init(void)
diff --git a/arch/blackfin/mach-bf527/dma.c b/arch/blackfin/mach-bf527/dma.c
index 231877578243..7bc7577d6c4f 100644
--- a/arch/blackfin/mach-bf527/dma.c
+++ b/arch/blackfin/mach-bf527/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf527/dma.c
- * Based on:
- * Author:
+ * This file contains the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
index 3832aab11e9a..ff68c8897087 100644
--- a/arch/blackfin/mach-bf527/include/mach/bf527.h
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/bf527.h
- * Based on:	include/asm-blackfin/mach-bf537/bf537.h
- * Author:	Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF527_H__
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index ebd6cebc1fbc..c1d55b878b45 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *	blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index ea9cb0fef8bc..e7d6034f268f 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
index 663c2bbdfd91..1079af8c7aef 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/cdefbf522.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF522_H
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
index 00377eb59b75..dc3119e9f663 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/cdefbf525.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF525_H
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
index fca8db708119..d6579449ee46 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/cdefbf527.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF527_H
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 1fe76d8e0403..7014dde10dd6 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/cdefBF52x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF52X_H
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h
index 0a8cdcdf0b49..cb139a254810 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/defBF522.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF522_H
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
index 5cd7576fef76..82abefc1ef6c 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/defBF525.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF525_H
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
index f040f364afa3..570a125df025 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/defBF527.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF527_H
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 68b55d03fedf..f821700716ee 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/defBF52x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF52X_H
diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h
index 06b6eebf0d49..104bff85290d 100644
--- a/arch/blackfin/mach-bf527/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf527/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf527/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
index 8ea660d8151f..aa6579a64a2f 100644
--- a/arch/blackfin/mach-bf527/include/mach/irq.h
+++ b/arch/blackfin/mach-bf527/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:	include/asm-blackfin/mach-bf527/irq.h
- * based on:	include/asm-blackfin/mach-bf537/irq.h
- * author:	Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * created:
- * description:
- *	system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BF527_IRQ_H_
diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
index 72b1652be4da..d4518b6f4adf 100644
--- a/arch/blackfin/mach-bf527/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf527/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c
index f8c8acd73e30..44ca215bf164 100644
--- a/arch/blackfin/mach-bf527/ints-priority.c
+++ b/arch/blackfin/mach-bf527/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/ints-priority.c
- * Based on:     arch/blackfin/mach-bf533/ints-priority.c
- * Author:       Michael Hennerich (michael.hennerich@analog.com)
+ * Set up the interrupt priorities
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 6c2b47fe4fe4..43f43a095a99 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -1,32 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf533/H8606.c
- * Based on:     arch/blackfin/mach-bf533/stamp.c
- * Author:       Javier Herrero <jherrero@hvsistemas.es>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2007-2008 HV Sistemas S.L.
+ *                      Javier Herrero <jherrero@hvsistemas.es>
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2007
- * Description:  Board Info File for the HV Sistemas H8606 board
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc
- *		 Copyright 2007,2008 HV Sistemas S.L.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 8208d67e2c97..b580884848d4 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -1,16 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf533/blackstamp.c
- * Based on:     arch/blackfin/mach-bf533/stamp.c
- * Author:       Benjamin Matthews <bmat@lle.rochester.edu>
- *               Aidan Williams <aidan@nicta.com.au>
+ * Board Info File for the BlackStamp
  *
- * Created:      2008
- * Description:  Board Info File for the BlackStamp
- *
- * Copyright 2005 National ICT Australia (NICTA)
  * Copyright 2004-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
+ *                2008 Benjamin Matthews <bmat@lle.rochester.edu>
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
  * More info about the BlackStamp at:
  * 	http://blackfin.uclinux.org/gf/project/blackstamp/
@@ -281,19 +275,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -384,8 +365,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init blackstamp_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 7443b26c80c5..7fc3b860d4ae 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -1,30 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf533/boards/cm_bf533.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au> Copyright 2005
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -261,19 +241,6 @@ static struct platform_device smsc911x_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 	{
@@ -506,8 +473,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&para_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init cm_bf533_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index fd518e383b79..d4689dcc198e 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf533/ezkit.c
- * Based on:     Original Work
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:
- *
- * Modified:     Robin Getz <rgetz@blackfin.uclinux.org> - Named the boards
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -33,12 +11,14 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/irq.h>
+#include <linux/i2c.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
@@ -56,12 +36,6 @@ static struct platform_device rtc_device = {
 };
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-	.name = "bfin-adv7393",
-};
-#endif
-
 /*
  *  USB-LAN EzExtender board
  *  Driver needs to know address, irq and flag pin.
@@ -98,54 +72,69 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
-static const char *map_probes[] = {
-	"stm_flash",
-	NULL,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions_a[] = {
+	{
+		.name       = "bootloader(nor a)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor a)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	},
 };
 
-static struct platdata_mtd_ram stm_pri_data_a = {
-	.mapname    = "Flash A Primary",
-	.map_probes = map_probes,
-	.bankwidth  = 2,
+static struct physmap_flash_data ezkit_flash_data_a = {
+	.width      = 2,
+	.parts      = ezkit_partitions_a,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions_a),
 };
 
-static struct resource stm_pri_resource_a = {
+static struct resource ezkit_flash_resource_a = {
 	.start = 0x20000000,
 	.end   = 0x200fffff,
 	.flags = IORESOURCE_MEM,
 };
 
-static struct platform_device stm_pri_device_a = {
-	.name          = "mtd-ram",
+static struct platform_device ezkit_flash_device_a = {
+	.name          = "physmap-flash",
 	.id            = 0,
 	.dev = {
-		.platform_data = &stm_pri_data_a,
+		.platform_data = &ezkit_flash_data_a,
 	},
 	.num_resources = 1,
-	.resource      = &stm_pri_resource_a,
+	.resource      = &ezkit_flash_resource_a,
+};
+
+static struct mtd_partition ezkit_partitions_b[] = {
+	{
+		.name   = "file system(nor b)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
 };
 
-static struct platdata_mtd_ram stm_pri_data_b = {
-	.mapname    = "Flash B Primary",
-	.map_probes = map_probes,
-	.bankwidth  = 2,
+static struct physmap_flash_data ezkit_flash_data_b = {
+	.width      = 2,
+	.parts      = ezkit_partitions_b,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions_b),
 };
 
-static struct resource stm_pri_resource_b = {
+static struct resource ezkit_flash_resource_b = {
 	.start = 0x20100000,
 	.end   = 0x201fffff,
 	.flags = IORESOURCE_MEM,
 };
 
-static struct platform_device stm_pri_device_b = {
-	.name          = "mtd-ram",
+static struct platform_device ezkit_flash_device_b = {
+	.name          = "physmap-flash",
 	.id            = 4,
 	.dev = {
-		.platform_data = &stm_pri_data_b,
+		.platform_data = &ezkit_flash_data_b,
 	},
 	.num_resources = 1,
-	.resource      = &stm_pri_resource_b,
+	.resource      = &ezkit_flash_resource_b,
 };
 #endif
 
@@ -400,19 +389,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -460,13 +436,21 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+};
+
 static struct platform_device *ezkit_devices[] __initdata = {
 
 	&bfin_dpmc,
 
-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
-	&stm_pri_device_a,
-	&stm_pri_device_b,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezkit_flash_device_a,
+	&ezkit_flash_device_b,
 #endif
 
 #if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
@@ -482,10 +466,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_spi0_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-	&bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 	&rtc_device,
 #endif
@@ -507,8 +487,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init ezkit_init(void)
@@ -516,6 +494,8 @@ static int __init ezkit_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index f19b63378b12..644be5e5ab6f 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -1,34 +1,12 @@
 /*
- * File:         arch/blackfin/mach-bf533/ip0x.c
- * Based on:     arch/blackfin/mach-bf533/bf1.c
- * Based on:     arch/blackfin/mach-bf533/stamp.c
- * Author:       Ivan Danov <idanov@gmail.com>
- *               Modified for IP0X David Rowe
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2007 David Rowe
+ *                2006 Intratrade Ltd.
+ *                     Ivan Danov <idanov@gmail.com>
+ *                2005 National ICT Australia (NICTA)
+ *                     Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2007
- * Description:  Board info file for the IP04/IP08 boards, which
- *               are derived from the BlackfinOne V2.0 boards.
- *
- * Modified:
- *               COpyright 2007 David Rowe
- *               Copyright 2006 Intratrade Ltd.
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -145,7 +123,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.ctl_reg = 0x1000,		/* CPOL=0,CPHA=0,Sandisk 1G work */
 	.enable_dma = 0,		/* if 1 - block!!! */
 	.bits_per_word = 8,
-	.cs_change_per_word = 0,
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 729fd7c26336..82f70efd66e7 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf533/stamp.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board Info File for the BF533-STAMP
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -95,12 +73,6 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-	.name = "bfin-adv7393",
-};
-#endif
-
 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 static struct resource net2272_bfin_resources[] = {
 	{
@@ -436,19 +408,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -487,6 +446,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = 39,
 	},
 #endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
 };
 
 static const unsigned int cclk_vlev_datasheet[] =
@@ -528,10 +492,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&smc91x_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-	&bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 	&net2272_bfin_device,
 #endif
@@ -563,8 +523,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&i2c_gpio_device,
 #endif
 
-	&bfin_gpios_device,
-
 #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 	&stamp_flash_device,
 #endif
diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c
index 7a443c37fb9f..4a14a46a9a68 100644
--- a/arch/blackfin/mach-bf533/dma.c
+++ b/arch/blackfin/mach-bf533/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf533/dma.c
- * Based on:
- * Author:
+ * simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h
index cf4427cd3f72..e3e05f8f7af9 100644
--- a/arch/blackfin/mach-bf533/include/mach/bf533.h
+++ b/arch/blackfin/mach-bf533/include/mach/bf533.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/bf533.h
- * Based on:
- * Author:
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF533_H__
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 6965b4088c44..9e1f3defb6bc 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *	blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index 499e897a4f4f..f4bd6df5d968 100644
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
index bbc3c8386d48..feb2392c43ea 100644
--- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/cdefBF532.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF532_H
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 7f4633223e6d..02b328eb0e07 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -1,48 +1,10 @@
-/************************************************************************
- *
- * This file is subject to the terms and conditions of the GNU Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Non-GPL License also available as part of VisualDSP++
- * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
- *
- * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
- *
- * This file under source code control, please send bugs or changes to:
- * dsptools.support@analog.com
- *
- ************************************************************************/
 /*
- * File:         include/asm-blackfin/mach-bf533/defBF532.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
+ * System & MMR bit and Address definitions for ADSP-BF532
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
-/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */
 
 #ifndef _DEF_BF532_H
 #define _DEF_BF532_H
diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h
index e45c17077aff..2af19d69a7a7 100644
--- a/arch/blackfin/mach-bf533/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf533/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf533/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
index db1e346cd1aa..c31498be0bbb 100644
--- a/arch/blackfin/mach-bf533/include/mach/irq.h
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/defBF532.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BF533_IRQ_H_
diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
index 2f59ce0b0cb5..075dae1af164 100644
--- a/arch/blackfin/mach-bf533/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
index f51994b7a2b9..8f714cf8135b 100644
--- a/arch/blackfin/mach-bf533/ints-priority.c
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf533/ints-priority.c
- * Based on:
- * Author:       Michael Hennerich
+ * Set up the interrupt priorities
  *
- * Created:      ?
- * Description:  Set up the interrupt priorities
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index 87acb7dd2df3..c85f4d770535 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -297,19 +276,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
 	{
@@ -699,8 +665,6 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 	&cm_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init cm_bf537e_init(void)
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index 8219dc3d65bd..ea11aa81340d 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/cm_bf537u.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -298,19 +277,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
 	{
@@ -605,8 +571,6 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 	&cm_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init cm_bf537u_init(void)
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 399f81da7b93..0da927252701 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -1,4 +1,10 @@
 /*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Cambridge Signal Processing
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 10b35b838bac..9ba290466b56 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/stamp.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -302,7 +280,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-	.cs_change_per_word = 0,
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9db6b40743e0..c46baa5e6d9b 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/stamp.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -121,19 +99,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
 	{
@@ -1078,12 +1043,6 @@ static struct platform_device bfin_fb_device = {
 };
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-	.name = "bfin-adv7393",
-};
-#endif
-
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 #include <asm/bfin-lq035q1.h>
 
@@ -1498,6 +1457,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&adp5588_gpio_data,
 	},
 #endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -1668,10 +1632,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_lq035q1_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-	&bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 	&bfin_uart_device,
 #endif
@@ -1702,8 +1662,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
-	&bfin_gpios_device,
-
 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 	&bfin_async_nand_device,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 61353f7bcb9e..57163b65a4f5 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/tcm_bf537.c
- * Based on:     arch/blackfin/mach-bf533/boards/cm_bf537.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -298,19 +277,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
 	{
@@ -607,8 +573,6 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 	&cm_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init tcm_bf537_init(void)
diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c
index d23fc0edf2b9..5c8c4ed517bb 100644
--- a/arch/blackfin/mach-bf537/dma.c
+++ b/arch/blackfin/mach-bf537/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf537/dma.c
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Licensed under the GPL-2 or later.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * This file contains the simple DMA Implementation for Blackfin
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
index f194a848ae8e..17fab4474669 100644
--- a/arch/blackfin/mach-bf537/include/mach/bf537.h
+++ b/arch/blackfin/mach-bf537/include/mach/bf537.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/bf537.h
- * Based on:
- * Author:
+ * System MMR Register and memory map for ADSP-BF537
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF537
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF537_H__
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index e95d54f9af6c..635c91c526a3 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:         include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *	blackfin serial driver header files
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index 9ee8834c8f1a..eab006d260c5 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
index 5f8b5f845be6..91825c9bd226 100644
--- a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/cdefbf534.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF534_H
diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF537.h b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
index b8fc949a991f..9363c3990421 100644
--- a/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/cdefBF537.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *	System MMR Register Map
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF537_H
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index a3227f9003ff..cebb14feb1ba 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/cdefBF537.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF534_H
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h
index 3d6c83e31b1e..8cb5d5cf0c94 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF537.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h
@@ -1,32 +1,7 @@
 /*
- * file:         include/asm-blackfin/mach-bf537/defbf537.h
- * based on:
- * author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * created:
- * description:
- *	system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF537_H
diff --git a/arch/blackfin/mach-bf537/include/mach/gpio.h b/arch/blackfin/mach-bf537/include/mach/gpio.h
index d77a31e45a30..104bff85290d 100644
--- a/arch/blackfin/mach-bf537/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf537/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf537/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
index b2a71d5d4e5f..0defa9457e7f 100644
--- a/arch/blackfin/mach-bf537/include/mach/irq.h
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:         include/asm-blackfin/mach-bf537/irq.h
- * based on:
- * author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * created:
- * description:
- *	system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BF537_IRQ_H_
diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h
index 87285e75e903..da9760329e49 100644
--- a/arch/blackfin/mach-bf537/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf537/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
index 51c48087e03b..f6500622b35d 100644
--- a/arch/blackfin/mach-bf537/ints-priority.c
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/ints-priority.c
- * Based on:     arch/blackfin/mach-bf533/ints-priority.c
- * Author:       Michael Hennerich
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Licensed under the GPL-2 or later.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Set up the interrupt priorities
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index f2ac3b0ebf24..14af5c2088d4 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf538/boards/ezkit.c
- * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2
  */
 
 #include <linux/device.h>
@@ -237,7 +215,6 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 	.bits_per_word = 8,
-	.cs_change_per_word = 0,
 };
 #endif
 
@@ -506,19 +483,6 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>
 
@@ -658,8 +622,6 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
-	&bfin_gpios_device,
-
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
diff --git a/arch/blackfin/mach-bf538/dma.c b/arch/blackfin/mach-bf538/dma.c
index d6837fbf94ea..5dc022589214 100644
--- a/arch/blackfin/mach-bf538/dma.c
+++ b/arch/blackfin/mach-bf538/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf538/dma.c
- * Based on:
- * Author:
+ * the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf538/include/mach/bf538.h b/arch/blackfin/mach-bf538/include/mach/bf538.h
index 9c8abb307908..0cf5bf8dab84 100644
--- a/arch/blackfin/mach-bf538/include/mach/bf538.h
+++ b/arch/blackfin/mach-bf538/include/mach/bf538.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf538/bf538.h
- * Based on:	include/asm-blackfin/mach-bf537/bf537.h
- * Author:	Michael Hennerich (michael.hennerich@analog.com)
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF538
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF538_H__
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index 999f239fe1a6..5c148142f041 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:         include/asm-blackfin/mach-bf538/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *	blackfin serial driver header files
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 5ecee1690957..278e8942eef2 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf538/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
index 1de67515dc9d..401ebd79d0aa 100644
--- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
+++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf538/cdefBF538.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF538_H
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 1c58914a8740..5f6c34dfd08e 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -1,47 +1,9 @@
-/************************************************************************
- *
- * This file is subject to the terms and conditions of the GNU Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Non-GPL License also available as part of VisualDSP++
- * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
- *
- * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
- *
- * This file under source code control, please send bugs or changes to:
- * dsptools.support@analog.com
- *
- ************************************************************************/
 /*
- * File:         include/asm-blackfin/mach-bf538/defBF539.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
+
 /* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF538/9 */
 
 #ifndef _DEF_BF539_H
diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h
index 30f4f723f7cc..295c78a465c2 100644
--- a/arch/blackfin/mach-bf538/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf538/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf538/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf538/include/mach/irq.h b/arch/blackfin/mach-bf538/include/mach/irq.h
index fdc87fe2c174..a4b7fcbc556b 100644
--- a/arch/blackfin/mach-bf538/include/mach/irq.h
+++ b/arch/blackfin/mach-bf538/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:	include/asm-blackfin/mach-bf538/irq.h
- * based on:	include/asm-blackfin/mach-bf537/irq.h
- * author:	Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2008 Analog Devices Inc.
  *
- * created:
- * description:
- *	system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BF538_IRQ_H_
diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h
index c8db264e3e4d..6121cf8b5872 100644
--- a/arch/blackfin/mach-bf538/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf538/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf538/ints-priority.c b/arch/blackfin/mach-bf538/ints-priority.c
index 70d17e550e05..1fa793ced347 100644
--- a/arch/blackfin/mach-bf538/ints-priority.c
+++ b/arch/blackfin/mach-bf538/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf538/ints-priority.c
- * Based on:     arch/blackfin/mach-bf533/ints-priority.c
- * Author:       Michael Hennerich
+ * Set up the interrupt priorities
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index e565aae11d72..ccdcd6da2e9f 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf548/boards/cm_bf548.c
- * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -380,19 +359,6 @@ static struct platform_device musb_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 static struct resource bfin_atapi_resources[] = {
 	{
@@ -546,13 +512,11 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 	.bits_per_word = 8,
-	.cs_change_per_word = 0,
 };
 #endif
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-	.cs_change_per_word = 0,
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
@@ -853,8 +817,6 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&para_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init cm_bf548_init(void)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index c66f3801274f..1a5286bbb3fa 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf548/boards/ezkit.c
- * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -208,7 +186,6 @@ static struct platform_device bfin_rotary_device = {
 #endif
 
 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
-#include <linux/input.h>
 #include <linux/spi/adxl34x.h>
 static const struct adxl34x_platform_data adxl34x_info = {
 	.x_axis_offset = 0,
@@ -636,7 +613,6 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 	.bits_per_word = 8,
-	.cs_change_per_word = 0,
 };
 #endif
 
@@ -650,7 +626,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-	.cs_change_per_word = 0,
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
@@ -681,7 +656,6 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 	.bits_per_word = 8,
-	.cs_change_per_word = 0,
 };
 #endif
 
@@ -908,19 +882,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 /*
@@ -1028,8 +989,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
-	&bfin_gpios_device,
-
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
index d9239bc05dd4..039a6d9d38f3 100644
--- a/arch/blackfin/mach-bf548/dma.c
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf548/dma.c
- * Based on:
- * Author:
+ * the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index cd31f72bdd82..7bead5ce0f3b 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/bf548.h
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  System MMR register and memory map for ADSP-BF548
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF548_H__
diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
index 9c7ca62a45eb..8821efe57fbc 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef BF54X_LQ043_H
 #define BF54X_LQ043_H
 
diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
index 1fb4ec77cc25..49338ae299ab 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_KPAD_H
 #define _BFIN_KPAD_H
 
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 2d1b5fa3cca0..dd44aa75fe72 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *	blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index 318667b2f036..13302b67857a 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF542.h b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
index 07aefb9ed79b..42f4a9469549 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF542.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF542_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF544.h b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
index 431a69278991..2207799575ff 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF544.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF544_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
index 93376e90dfc5..423421515134 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF547.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF548_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
index 9cd74384136f..df84180410c4 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF548.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF548_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
index ead360b69dea..34c84c7fb256 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf549/cdefBF549.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF549_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
index 6e636c418cb0..a2e9d9849eba 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF54x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF54X_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
index b1316541b8d6..d3bc6d1df547 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF542.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF542_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index c2c785bdc5fc..dd414ae4ba4c 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF544.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF544_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 661f0d877bd1..5a9dbabe0a68 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF547.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF548_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index 85d4bade911d..82cd593f7391 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF548.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF548_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index 096734541644..6fc6e39ab61b 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF549.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF549_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index e022e896cb18..8590c8c78336 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF54x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF54X_H
diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
index 3a2051709787..850e39d193e3 100644
--- a/arch/blackfin/mach-bf548/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf548/include/mach/gpio.h
@@ -1,34 +1,8 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/gpio.h
- * Based on:
- * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-
-
 #define GPIO_PA0	0
 #define GPIO_PA1	1
 #define GPIO_PA2	2
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index f194625f6821..106db05684ae 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:	include/asm-blackfin/mach-bf548/irq.h
- * based on:	include/asm-blackfin/mach-bf537/irq.h
- * author:	Roy Huang (roy.huang@analog.com)
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *	system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BF548_IRQ_H_
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index ce372ba0f046..89ad6a886362 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c
index 9dd0fa3ac4de..48dd3a4bc4a5 100644
--- a/arch/blackfin/mach-bf548/ints-priority.c
+++ b/arch/blackfin/mach-bf548/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/ints-priority.c
- * Based on:     arch/blackfin/mach-bf533/ints-priority.c
- * Author:       Michael Hennerich
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Licensed under the GPL-2 or later.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Set up the interrupt priorities
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S
index 9439bc6bd01f..0261a5e751b3 100644
--- a/arch/blackfin/mach-bf561/atomic.S
+++ b/arch/blackfin/mach-bf561/atomic.S
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/mach-bf561/atomic.S
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2008 Analog Devices Inc.
+ *              Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6577ecfcf11e..dfc8d5b77986 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -1,30 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf533/boards/cm_bf561.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au> Copyright 2005
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               2008-2009 Bluetechnix
+ *               2005 National ICT Australia (NICTA)
+ *                    Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2006
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -285,19 +265,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 static struct resource isp1362_hcd_resources[] = {
 	{
@@ -532,8 +499,6 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&para_flash_device,
 #endif
-
-	&bfin_gpios_device,
 };
 
 static int __init cm_bf561_init(void)
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index caed96bb957e..9e2d8cfba546 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf561/ezkit.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               2005 National ICT Australia (NICTA)
+ *                    Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -387,19 +366,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -493,8 +459,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&isp1362_hcd_device,
 #endif
 
-	&bfin_gpios_device,
-
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index 6f77dbe952f5..8ba7252455e1 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -1,15 +1,13 @@
 /*
- *  File: arch/blackfin/mach-bf561/tepla.c
+ * Copyright 2004-2007 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- *  Copyright 2004-2007 Analog Devices Inc.
- *  Only SMSC91C1111 was registered, may do more later.
+ * Thanks to Jamey Hicks.
  *
- *  Copyright 2005 National ICT Australia (NICTA), Aidan Williams <aidan@nicta.com.au>
- *  Thanks to Jamey Hicks.
+ * Only SMSC91C1111 was registered, may do more later.
  *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
+ * Licensed under the GPL-2
  */
 
 #include <linux/device.h>
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 93635a766f9c..1e60a92dd602 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -48,7 +48,7 @@ coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned l
 	return ret;
 }
 
-static struct file_operations coreb_fops = {
+static const struct file_operations coreb_fops = {
 	.owner   = THIS_MODULE,
 	.ioctl   = coreb_ioctl,
 };
diff --git a/arch/blackfin/mach-bf561/dma.c b/arch/blackfin/mach-bf561/dma.c
index 42b0037afe61..c938c3c7355d 100644
--- a/arch/blackfin/mach-bf561/dma.c
+++ b/arch/blackfin/mach-bf561/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf561/dma.c
- * Based on:
- * Author:
+ * the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf561/include/mach/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h
index 9968362a2ee4..9f9a367e6a24 100644
--- a/arch/blackfin/mach-bf561/include/mach/bf561.h
+++ b/arch/blackfin/mach-bf561/include/mach/bf561.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf561/bf561.h
- * Based on:
- * Author:
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF561_H__
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index fd5e8878b8c4..e33e158bc16d 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *	blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
index 8be31358ef88..67d6bdcd3fa8 100644
--- a/arch/blackfin/mach-bf561/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf561/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
index 9d9858c2be68..81ecdb71c6af 100644
--- a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf561/cdefBF561.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF561_H
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index 5fc0f05026e0..a31e509553fb 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -1,32 +1,7 @@
-
 /*
- * File:         include/asm-blackfin/mach-bf561/defBF561.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF561_H
diff --git a/arch/blackfin/mach-bf561/include/mach/gpio.h b/arch/blackfin/mach-bf561/include/mach/gpio.h
index 7882f79e1ade..a651a8cf805f 100644
--- a/arch/blackfin/mach-bf561/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf561/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf561/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h
index 6698389c5564..7b208db267bf 100644
--- a/arch/blackfin/mach-bf561/include/mach/irq.h
+++ b/arch/blackfin/mach-bf561/include/mach/irq.h
@@ -1,32 +1,7 @@
-
 /*
- * File:         include/asm-blackfin/mach-bf561/irq.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BF561_IRQ_H_
diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h
index 2e5ad6347dea..3a7b46bbe849 100644
--- a/arch/blackfin/mach-bf561/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf561/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf561/include/mach/smp.h b/arch/blackfin/mach-bf561/include/mach/smp.h
index f9e65ebe81b2..390c7f4ae7b3 100644
--- a/arch/blackfin/mach-bf561/include/mach/smp.h
+++ b/arch/blackfin/mach-bf561/include/mach/smp.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _MACH_BF561_SMP
 #define _MACH_BF561_SMP
 
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
index 9d2f23344720..b4424172ad9e 100644
--- a/arch/blackfin/mach-bf561/ints-priority.c
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf561/ints-priority.c
- * Based on:     arch/blackfin/mach-bf537/ints-priority.c
- * Author:       Michael Hennerich
+ * Set up the interrupt priorities
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S
index f72a6af20c4f..8e6050369c06 100644
--- a/arch/blackfin/mach-bf561/secondary.S
+++ b/arch/blackfin/mach-bf561/secondary.S
@@ -1,26 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf561/secondary.S
- * Based on:     arch/blackfin/mach-bf561/head.S
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * BF561 coreB bootstrap file
  *
- *               Copyright 2007 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Philippe Gerum <rpm@xenomai.org>
  *
- * Description:  BF561 coreB bootstrap file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 8c10701c251f..510f57641495 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/mach-bf561/smp.c
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/init.h>
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 5998d8632a73..9dbafcdcf479 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-common/arch_checks.c
- * Based on:
- * Author:	 Robin Getz <rgetz@blackfin.uclinux.org>
+ * Do some checking to make sure things are OK
  *
- * Created:      25Jul07
- * Description:  Do some checking to make sure things are OK
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <asm/fixed_code.h>
diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c
index 4ebbd78db3a4..a60a24f5035d 100644
--- a/arch/blackfin/mach-common/cache-c.c
+++ b/arch/blackfin/mach-common/cache-c.c
@@ -3,8 +3,6 @@
  *
  * Copyright 2004-2009 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index d9666fe6c3d6..ea540318a228 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -3,8 +3,6 @@
  *
  * Copyright 2004-2008 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 85c658083279..01506504e6d0 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -1,30 +1,9 @@
 /*
- * File:	 arch/blackfin/mach-common/cpufreq.c
- * Based on:
- * Author:
+ * Blackfin core clock scaling
  *
- * Created:
- * Description:	 Blackfin core clock scaling
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Modified:
- *		 Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:	 Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA	02110-1301	USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 1e7cac23e25f..94a0375cbdcf 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1,32 +1,11 @@
 /*
- * File:         arch/blackfin/mach-common/entry.S
- * Based on:
- * Author:       Linus Torvalds
+ * Contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all
+ * interrupts and faults that can result in a task-switch.
  *
- * Created:      ?
- * Description:  contains the system-call and fault low-level handling routines.
- *               This also contains the timer-interrupt handler, as well as all
- *               interrupts and faults that can result in a task-switch.
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 /* NOTE: This code handles signal-recognition, which happens every time
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index 9c79dfea2a53..cab0a0031eee 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -3,8 +3,6 @@
  *
  * Copyright 2004-2008 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 82d417ef4b5b..8085ff1cce00 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-common/interrupt.S
- * Based on:
- * Author:       D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
- *               Kenneth Albanowski <kjahds@kjahds.com>
- *
- * Created:      ?
- * Description:  Interrupt Entries
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ * Interrupt Entries
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright 2005-2009 Analog Devices Inc.
+ *               D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
+ *               Kenneth Albanowski <kjahds@kjahds.com>
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 6ffda78aaf9d..660ea1bec54c 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1,33 +1,14 @@
 /*
- * File:         arch/blackfin/mach-common/ints-priority.c
+ * Set up the interrupt priorities
  *
- * Description:  Set up the interrupt priorities
+ * Copyright  2004-2009 Analog Devices Inc.
+ *                 2003 Bas Vermeulen <bas@buyways.nl>
+ *                 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ *            2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ *                 1999 D. Jeff Dionne <jeff@uclinux.org>
+ *                 1996 Roman Zippel
  *
- * Modified:
- *               1996 Roman Zippel
- *               1999 D. Jeff Dionne <jeff@uclinux.org>
- *               2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
- *               2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
- *               2003 Metrowerks/Motorola
- *               2003 Bas Vermeulen <bas@buyways.nl>
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c
index 883e3241b17e..c6496249e2bc 100644
--- a/arch/blackfin/mach-common/irqpanic.c
+++ b/arch/blackfin/mach-common/irqpanic.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-common/irqpanic.c
- * Based on:
- * Author:
+ * panic kernel with dump information
  *
- * Created:      ?
- * Description:  panic kernel with dump information
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:     rgetz - added cache checking code 14Feb06
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 0e3d4ff9d8b6..8837be4edb4a 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -1,35 +1,11 @@
 /*
- * File:         arch/blackfin/mach-common/pm.c
- * Based on:     arm/mach-omap/pm.c
- * Author:       Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
+ * Blackfin power management
  *
- * Created:      2001
- * Description:  Blackfin power management
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Modified:     Nicolas Pitre - PXA250 support
- *                Copyright (c) 2002 Monta Vista Software, Inc.
- *               David Singleton - OMAP1510
- *                Copyright (c) 2002 Monta Vista Software, Inc.
- *               Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
- *                Copyright 2004
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2
+ * based on arm/mach-omap/pm.c
+ *    Copyright 2001, Cliff Brake <cbrake@accelent.com> and others
  */
 
 #include <linux/suspend.h>
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 349ee3f5466a..d98585f3237d 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -1,24 +1,10 @@
 /*
- * File:         arch/blackfin/kernel/smp.c
- * Author:       Philippe Gerum <rpm@xenomai.org>
- * IPI management based on arch/arm/kernel/smp.c.
+ * IPI management based on arch/arm/kernel/smp.c (Copyright 2002 ARM Limited)
  *
- *               Copyright 2007 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
index bc0062884fde..fb0b1599cfb7 100644
--- a/arch/blackfin/mm/blackfin_sram.h
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mm/blackfin_sram.h
- * Based on:     arch/blackfin/mm/blackfin_sram.c
- * Author:       Mike Frysinger
+ * Local prototypes meant for internal use only
  *
- * Created:      Aug 2006
- * Description:  Local prototypes meant for internal use only
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BLACKFIN_SRAM_H__
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index b88ce7fda548..bb9c98f9cb5b 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/mm/init.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/swap.h>
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index beb1a608824c..84cdc5a1c139 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -1,19 +1,9 @@
 /*
- * Description: Instruction SRAM accessor functions for the Blackfin
+ * Instruction SRAM accessor functions for the Blackfin
  *
  * Copyright 2008 Analog Devices Inc.
  *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #define pr_fmt(fmt) "isram: " fmt
diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index eb63ab353e5a..f068c11ea98f 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mm/sram-alloc.c
- * Based on:
- * Author:
+ * SRAM allocator for Blackfin on-chip memory
  *
- * Created:
- * Description:  SRAM allocator for Blackfin L1 and L2 memory
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 6cc1a0319a5d..562b9a7feae7 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -244,7 +244,7 @@ static unsigned sync_serial_prescale_shadow;
 
 #define NUMBER_OF_PORTS 2
 
-static struct file_operations sync_serial_fops = {
+static const struct file_operations sync_serial_fops = {
 	.owner   = THIS_MODULE,
 	.write   = sync_serial_write,
 	.read    = sync_serial_read,
diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
index fe1fde893887..d89ab80498ed 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
@@ -855,7 +855,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
 	return 0;
 }
 
-struct file_operations gpio_fops = {
+static const struct file_operations gpio_fops = {
 	.owner       = THIS_MODULE,
 	.poll        = gpio_poll,
 	.ioctl       = gpio_ioctl,
diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 6b0a2b6fed6a..0974c0ecc594 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -527,7 +527,7 @@ static void do_signal(void)
 
 no_signal:
 	/* Did we come from a system call? */
-	if (__frame->syscallno >= 0) {
+	if (__frame->syscallno != -1) {
 		/* Restart the system call - no handlers present */
 		switch (__frame->gr8) {
 		case -ERESTARTNOHAND:
diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h
index d06933bd6318..4010f1fc5b65 100644
--- a/arch/m32r/include/asm/io.h
+++ b/arch/m32r/include/asm/io.h
@@ -162,6 +162,13 @@ static inline void _writel(unsigned long l, unsigned long addr)
 #define __raw_writew writew
 #define __raw_writel writel
 
+#define ioread8 read
+#define ioread16 readw
+#define ioread32 readl
+#define iowrite8 writeb
+#define iowrite16 writew
+#define iowrite32 writel
+
 #define mmiowb()
 
 #define flush_write_buffers() do { } while (0)  /* M32R_FIXME */
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index 22624b51d4d3..700570747a90 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -23,12 +23,6 @@ EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(iounmap);
 EXPORT_SYMBOL(kernel_thread);
 
-/* Networking helper routines. */
-/* Delay loops */
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(__const_udelay);
-
 EXPORT_SYMBOL(strncpy_from_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(clear_user);
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 1b7598e6f6e8..8a88f1f0a3e2 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -17,6 +17,7 @@
 
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index ba61c4c73202..e7fee0f198d5 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -33,6 +33,15 @@
 
 #include <asm/hw_irq.h>
 
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
+/* this needs a better home */
+DEFINE_SPINLOCK(rtc_lock);
+
+#ifdef CONFIG_RTC_DRV_CMOS_MODULE
+EXPORT_SYMBOL(rtc_lock);
+#endif
+#endif  /* pc-style 'CMOS' RTC support */
+
 #ifdef CONFIG_SMP
 extern void smp_local_timer_interrupt(void);
 #endif
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 03b14e55cd89..fbd109031df3 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -104,8 +104,8 @@ static void set_eit_vector_entries(void)
 	eit_vector[186] = (unsigned long)smp_call_function_interrupt;
 	eit_vector[187] = (unsigned long)smp_ipi_timer_interrupt;
 	eit_vector[188] = (unsigned long)smp_flush_cache_all_interrupt;
-	eit_vector[189] = (unsigned long)smp_call_function_single_interrupt;
-	eit_vector[190] = 0;
+	eit_vector[189] = 0;	/* CPU_BOOT_IPI */
+	eit_vector[190] = (unsigned long)smp_call_function_single_interrupt;
 	eit_vector[191] = 0;
 #endif
 	_flush_cache_copyback_all();
diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c
index ced549be80f5..940f4837e42b 100644
--- a/arch/m32r/lib/delay.c
+++ b/arch/m32r/lib/delay.c
@@ -122,4 +122,8 @@ void __ndelay(unsigned long nsecs)
 {
 	__const_udelay(nsecs * 0x00005);  /* 2**32 / 1000000000 (rounded up) */
 }
+
+EXPORT_SYMBOL(__delay);
+EXPORT_SYMBOL(__const_udelay);
+EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index b7a78ad429b7..5d2858f6eede 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -32,6 +32,9 @@ typedef struct {
 } mem_prof_t;
 static mem_prof_t mem_prof[MAX_NUMNODES];
 
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
 static void __init mem_prof_init(void)
 {
 	unsigned long start_pfn, holes, free_pfn;
@@ -42,7 +45,7 @@ static void __init mem_prof_init(void)
 	/* Node#0 SDRAM */
 	mp = &mem_prof[0];
 	mp->start_pfn = PFN_UP(CONFIG_MEMORY_START);
-	mp->pages = PFN_DOWN(CONFIG_MEMORY_SIZE);
+	mp->pages = PFN_DOWN(memory_end - memory_start);
 	mp->holes = 0;
 	mp->free_pfn = PFN_UP(__pa(_end));
 
diff --git a/arch/m32r/mm/mmu.S b/arch/m32r/mm/mmu.S
index 49a6d16a3d58..e9491a5ae827 100644
--- a/arch/m32r/mm/mmu.S
+++ b/arch/m32r/mm/mmu.S
@@ -150,9 +150,13 @@ ENTRY(tme_handler)
 
 	; pmd = pmd_offset(pgd, address);
 	ld	r3, @r3			; r3: pmd data
-	ldi	r2, #-4096
 	beqz	r3, 3f			; pmd_none(*pmd) ?
 
+	and3	r2, r3, #0xfff
+	add3	r2, r2, #-355		; _KERNPG_TABLE(=0x163)
+	bnez	r2, 3f			; pmd_bad(*pmd) ?
+	ldi	r2, #-4096
+
 	; pte = pte_offset(pmd, address);
 	and	r2, r3			; r2: pte base addr
 	srl3	r3, r0, #10
@@ -263,9 +267,9 @@ ENTRY(tme_handler)
 	ld	r1, @r3			; r1: pmd
 	beqz	r1, 3f			; pmd_none(*pmd) ?
 ;
-	and3	r1, r1, #0xeff
-	ldi	r4, #611		; _KERNPG_TABLE(=611)
-	bne	r1, r4, 3f		; !pmd_bad(*pmd) ?
+	and3	r1, r1, #0x3ff
+	ldi	r4, #0x163		; _KERNPG_TABLE(=0x163)
+	bne	r1, r4, 3f		; pmd_bad(*pmd) ?
 
 	.fillinsn
 4:
diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h
index 554f65b6cd3b..394ee946015c 100644
--- a/arch/m68k/include/asm/hardirq_mm.h
+++ b/arch/m68k/include/asm/hardirq_mm.h
@@ -1,8 +1,16 @@
 #ifndef __M68K_HARDIRQ_H
 #define __M68K_HARDIRQ_H
 
-#define HARDIRQ_BITS	8
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
 
-#include <asm-generic/hardirq.h>
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
 
 #endif
diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index 594ee0e657fe..9a8876f715d8 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -45,25 +45,25 @@ int main(void)
 	DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate));
 
 	/* offsets into the pt_regs */
-	DEFINE(PT_D0, offsetof(struct pt_regs, d0));
-	DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0));
-	DEFINE(PT_D1, offsetof(struct pt_regs, d1));
-	DEFINE(PT_D2, offsetof(struct pt_regs, d2));
-	DEFINE(PT_D3, offsetof(struct pt_regs, d3));
-	DEFINE(PT_D4, offsetof(struct pt_regs, d4));
-	DEFINE(PT_D5, offsetof(struct pt_regs, d5));
-	DEFINE(PT_A0, offsetof(struct pt_regs, a0));
-	DEFINE(PT_A1, offsetof(struct pt_regs, a1));
-	DEFINE(PT_A2, offsetof(struct pt_regs, a2));
-	DEFINE(PT_PC, offsetof(struct pt_regs, pc));
-	DEFINE(PT_SR, offsetof(struct pt_regs, sr));
+	DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0));
+	DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0));
+	DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1));
+	DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2));
+	DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3));
+	DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4));
+	DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5));
+	DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0));
+	DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1));
+	DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2));
+	DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc));
+	DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr));
 
 #ifdef CONFIG_COLDFIRE
 	/* bitfields are a bit difficult */
-	DEFINE(PT_FORMATVEC, offsetof(struct pt_regs, sr) - 2);
+	DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2);
 #else
 	/* bitfields are a bit difficult */
-	DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
+	DEFINE(PT_OFF_VECTOR, offsetof(struct pt_regs, pc) + 4);
 #endif
 
 	/* signal defines */
diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S
index f56faa5c9cd9..56043ade3941 100644
--- a/arch/m68knommu/kernel/entry.S
+++ b/arch/m68knommu/kernel/entry.S
@@ -46,7 +46,7 @@
 ENTRY(buserr)
 	SAVE_ALL
 	moveq	#-1,%d0
-	movel	%d0,%sp@(PT_ORIG_D0)
+	movel	%d0,%sp@(PT_OFF_ORIG_D0)
 	movel	%sp,%sp@- 		/* stack frame pointer argument */
 	jsr	buserr_c
 	addql	#4,%sp
@@ -55,7 +55,7 @@ ENTRY(buserr)
 ENTRY(trap)
 	SAVE_ALL
 	moveq	#-1,%d0
-	movel	%d0,%sp@(PT_ORIG_D0)
+	movel	%d0,%sp@(PT_OFF_ORIG_D0)
 	movel	%sp,%sp@- 		/* stack frame pointer argument */
 	jsr	trap_c
 	addql	#4,%sp
@@ -67,7 +67,7 @@ ENTRY(trap)
 ENTRY(dbginterrupt)
 	SAVE_ALL
 	moveq	#-1,%d0
-	movel	%d0,%sp@(PT_ORIG_D0)
+	movel	%d0,%sp@(PT_OFF_ORIG_D0)
 	movel	%sp,%sp@- 		/* stack frame pointer argument */
 	jsr	dbginterrupt_c
 	addql	#4,%sp
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index b1703c67a4f1..f3236d0b522d 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -162,7 +162,7 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 		totalram_pages++;
 		pages++;
 	}
-	printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+	printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages * (PAGE_SIZE / 1024));
 }
 #endif
 
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index 0f41ba82a3b5..942397984c66 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -17,7 +17,6 @@
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 #include <asm/mcfdma.h>
-#include <asm/mcfuart.h>
 
 /***************************************************************************/
 
diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S
index b1aef72f3baf..9d80d2c42866 100644
--- a/arch/m68knommu/platform/68328/entry.S
+++ b/arch/m68knommu/platform/68328/entry.S
@@ -39,17 +39,17 @@
 .globl inthandler7
 
 badsys:
-	movel	#-ENOSYS,%sp@(PT_D0)
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)
 	jra	ret_from_exception
 
 do_trace:
-	movel	#-ENOSYS,%sp@(PT_D0)	/* needed for strace*/
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)	/* needed for strace*/
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
-	movel	%sp@(PT_ORIG_D0),%d1
+	movel	%sp@(PT_OFF_ORIG_D0),%d1
 	movel	#-ENOSYS,%d0
 	cmpl	#NR_syscalls,%d1
 	jcc	1f
@@ -57,7 +57,7 @@ do_trace:
 	lea	sys_call_table, %a0
 	jbsr	%a0@(%d1)
 
-1:	movel	%d0,%sp@(PT_D0)		/* save the return value */
+1:	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
@@ -75,7 +75,7 @@ ENTRY(system_call)
 	jbsr    set_esp0
 	addql   #4,%sp
 
-	movel	%sp@(PT_ORIG_D0),%d0
+	movel	%sp@(PT_OFF_ORIG_D0),%d0
 
 	movel	%sp,%d1			/* get thread_info pointer */
 	andl	#-THREAD_SIZE,%d1
@@ -88,10 +88,10 @@ ENTRY(system_call)
 	lea	sys_call_table,%a0
 	movel	%a0@(%d0), %a0
 	jbsr	%a0@
-	movel	%d0,%sp@(PT_D0)		/* save the return value*/
+	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value*/
 
 ret_from_exception:
-	btst	#5,%sp@(PT_SR)		/* check if returning to kernel*/
+	btst	#5,%sp@(PT_OFF_SR)		/* check if returning to kernel*/
 	jeq	Luser_return		/* if so, skip resched, signals*/
 
 Lkernel_return:
@@ -133,7 +133,7 @@ Lreturn:
  */
 inthandler1:
 	SAVE_ALL
-	movew	%sp@(PT_VECTOR), %d0
+	movew	%sp@(PT_OFF_VECTOR), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -144,7 +144,7 @@ inthandler1:
 
 inthandler2:
 	SAVE_ALL
-	movew	%sp@(PT_VECTOR), %d0
+	movew	%sp@(PT_OFF_VECTOR), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -155,7 +155,7 @@ inthandler2:
 
 inthandler3:
 	SAVE_ALL
-	movew	%sp@(PT_VECTOR), %d0
+	movew	%sp@(PT_OFF_VECTOR), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -166,7 +166,7 @@ inthandler3:
 
 inthandler4:
 	SAVE_ALL
-	movew	%sp@(PT_VECTOR), %d0
+	movew	%sp@(PT_OFF_VECTOR), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -177,7 +177,7 @@ inthandler4:
 
 inthandler5:
 	SAVE_ALL
-	movew	%sp@(PT_VECTOR), %d0
+	movew	%sp@(PT_OFF_VECTOR), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -188,7 +188,7 @@ inthandler5:
 
 inthandler6:
 	SAVE_ALL
-	movew	%sp@(PT_VECTOR), %d0
+	movew	%sp@(PT_OFF_VECTOR), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -199,7 +199,7 @@ inthandler6:
 
 inthandler7:
 	SAVE_ALL
-	movew	%sp@(PT_VECTOR), %d0
+	movew	%sp@(PT_OFF_VECTOR), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -210,7 +210,7 @@ inthandler7:
 
 inthandler:
 	SAVE_ALL
-	movew	%sp@(PT_VECTOR), %d0
+	movew	%sp@(PT_OFF_VECTOR), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -224,7 +224,7 @@ ret_from_interrupt:
 2:
 	RESTORE_ALL
 1:
-	moveb	%sp@(PT_SR), %d0
+	moveb	%sp@(PT_OFF_SR), %d0
 	and	#7, %d0
 	jhi	2b
 
diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S
index 55dfefe38642..6d3460a39cac 100644
--- a/arch/m68knommu/platform/68360/entry.S
+++ b/arch/m68knommu/platform/68360/entry.S
@@ -35,17 +35,17 @@
 .globl inthandler
 
 badsys:
-	movel	#-ENOSYS,%sp@(PT_D0)
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)
 	jra	ret_from_exception
 
 do_trace:
-	movel	#-ENOSYS,%sp@(PT_D0)	/* needed for strace*/
+	movel	#-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
-	movel	%sp@(PT_ORIG_D0),%d1
+	movel	%sp@(PT_OFF_ORIG_D0),%d1
 	movel	#-ENOSYS,%d0
 	cmpl	#NR_syscalls,%d1
 	jcc	1f
@@ -53,7 +53,7 @@ do_trace:
 	lea	sys_call_table, %a0
 	jbsr	%a0@(%d1)
 
-1:	movel	%d0,%sp@(PT_D0)		/* save the return value */
+1:	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
@@ -79,10 +79,10 @@ ENTRY(system_call)
 	lea	sys_call_table,%a0
 	movel	%a0@(%d0), %a0
 	jbsr	%a0@
-	movel	%d0,%sp@(PT_D0)		/* save the return value*/
+	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value*/
 
 ret_from_exception:
-	btst	#5,%sp@(PT_SR)		/* check if returning to kernel*/
+	btst	#5,%sp@(PT_OFF_SR)	/* check if returning to kernel*/
 	jeq	Luser_return		/* if so, skip resched, signals*/
 
 Lkernel_return:
@@ -124,7 +124,7 @@ Lreturn:
  */
 inthandler:
 	SAVE_ALL
-	movew	%sp@(PT_VECTOR), %d0
+	movew	%sp@(PT_OFF_VECTOR), %d0
 	and.l	#0x3ff, %d0
 	lsr.l   #0x02,  %d0
 
@@ -139,7 +139,7 @@ ret_from_interrupt:
 2:
 	RESTORE_ALL
 1:
-	moveb	%sp@(PT_SR), %d0
+	moveb	%sp@(PT_OFF_SR), %d0
 	and	#7, %d0
 	jhi	2b
 	/* check if we need to do software interrupts */
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index 3b471c0da24a..dd7d591f70ea 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -81,11 +81,11 @@ ENTRY(system_call)
 
 	movel	%d3,%a0
 	jbsr	%a0@
-	movel	%d0,%sp@(PT_D0)		/* save the return value */
+	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
 	jra	ret_from_exception
 1:
-	movel	#-ENOSYS,%d2		/* strace needs -ENOSYS in PT_D0 */
-	movel	%d2,PT_D0(%sp)		/* on syscall entry */
+	movel	#-ENOSYS,%d2		/* strace needs -ENOSYS in PT_OFF_D0 */
+	movel	%d2,PT_OFF_D0(%sp)	/* on syscall entry */
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
@@ -93,7 +93,7 @@ ENTRY(system_call)
 	addql	#4,%sp
 	movel	%d3,%a0
 	jbsr	%a0@
-	movel	%d0,%sp@(PT_D0)		/* save the return value */
+	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
@@ -104,7 +104,7 @@ ret_from_signal:
 
 ret_from_exception:
 	move	#0x2700,%sr		/* disable intrs */
-	btst	#5,%sp@(PT_SR)		/* check if returning to kernel */
+	btst	#5,%sp@(PT_OFF_SR)	/* check if returning to kernel */
 	jeq	Luser_return		/* if so, skip resched, signals */
 
 #ifdef CONFIG_PREEMPT
@@ -142,8 +142,8 @@ Luser_return:
 Lreturn:
 	move	#0x2700,%sr		/* disable intrs */
 	movel	sw_usp,%a0		/* get usp */
-	movel	%sp@(PT_PC),%a0@-	/* copy exception program counter */
-	movel	%sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+	movel	%sp@(PT_OFF_PC),%a0@-	/* copy exception program counter */
+	movel	%sp@(PT_OFF_FORMATVEC),%a0@- /* copy exception format/vector/sr */
 	moveml	%sp@,%d1-%d5/%a0-%a2
 	lea	%sp@(32),%sp		/* space for 8 regs */
 	movel	%sp@+,%d0
@@ -181,9 +181,9 @@ Lsignal_return:
 ENTRY(inthandler)
 	SAVE_ALL
 	moveq	#-1,%d0
-	movel	%d0,%sp@(PT_ORIG_D0)
+	movel	%d0,%sp@(PT_OFF_ORIG_D0)
 
-	movew	%sp@(PT_FORMATVEC),%d0	/* put exception # in d0 */
+	movew	%sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
 	andl	#0x03fc,%d0		/* mask out vector only */
 
 	movel	%sp,%sp@-		/* push regs arg */
@@ -203,7 +203,7 @@ ENTRY(inthandler)
 ENTRY(fasthandler)
 	SAVE_LOCAL
 
-	movew	%sp@(PT_FORMATVEC),%d0
+	movew	%sp@(PT_OFF_FORMATVEC),%d0
 	andl	#0x03fc,%d0		/* mask out vector only */
 
 	movel	%sp,%sp@-		/* push regs arg */
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index acc1f05d1e2c..e3ecb36dd554 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -592,6 +592,8 @@ C_ENTRY(full_exception_trap):
 	nop
 	mfs	r7, rfsr;		/* save FSR */
 	nop
+	mts	rfsr, r0;	/* Clear sticky fsr */
+	nop
 	la	r12, r0, full_exception
 	set_vms;
 	rtbd	r12, 0;
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 6b0288ebccd6..2b86c03aa841 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -384,7 +384,7 @@ handle_other_ex: /* Handle Other exceptions here */
 	addk	r8, r17, r0; /* Load exception address */
 	bralid	r15, full_exception; /* Branch to the handler */
 	nop;
-	mts	r0, rfsr;	/* Clear sticky fsr */
+	mts	rfsr, r0;	/* Clear sticky fsr */
 	nop
 
 	/*
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 4201c743cc9f..c592d475b3d8 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -235,7 +235,9 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
 	regs->pc = pc;
 	regs->r1 = usp;
 	regs->pt_mode = 0;
+#ifdef CONFIG_MMU
 	regs->msr |= MSR_UMS;
+#endif
 }
 
 #ifdef CONFIG_MMU
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 3ab6d80d150d..19c1c82849ff 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -175,7 +175,7 @@ static dbdev_tab_t dbdev_tab[] = {
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
 #ifdef CONFIG_PM
-static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
+static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
 #endif
 
 
@@ -993,14 +993,13 @@ void au1xxx_dbdma_suspend(void)
 	au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
 
 	/* save channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
 		au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
 		au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
 		au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
 		au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
 		au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
 		au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
-		au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
 
 		/* halt channel */
 		au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
@@ -1027,14 +1026,13 @@ void au1xxx_dbdma_resume(void)
 	au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
 
 	/* restore channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
 		au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
 		au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
 		au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
 		au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
 		au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
 		au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
-		au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
 		au_sync();
 		addr += 0x100;	/* next channel base */
 	}
diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
index dfbfd7e2ac08..938b1d0b7652 100644
--- a/arch/mips/basler/excite/excite_iodev.c
+++ b/arch/mips/basler/excite/excite_iodev.c
@@ -112,10 +112,8 @@ static int iodev_open(struct inode *i, struct file *f)
 {
 	int ret;
 
-	lock_kernel();
 	ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
 			   iodev_name, &miscdev);
-	unlock_kernel();
 
 	return ret;
 }
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index aaa585cf26e3..c146d1ededed 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,5 +1,5 @@
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-		   dev-dsp.o dev-enet.o
+		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index fd77f548207a..78e155d21be6 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -20,10 +20,11 @@
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
-#include <bcm63xx_board.h>
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_dev_uart.h>
 #include <board_bcm963xx.h>
 
 #define PFX	"board_bcm963xx: "
@@ -793,6 +794,11 @@ int __init board_register_devices(void)
 {
 	u32 val;
 
+	bcm63xx_uart_register();
+
+	if (board.has_pccard)
+		bcm63xx_pcmcia_register();
+
 	if (board.has_enet0 &&
 	    !board_get_mac_address(board.enet0.mac_addr))
 		bcm63xx_enet_register(0, &board.enet0);
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
new file mode 100644
index 000000000000..de4d917fd54d
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-pcmcia.c
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/bootinfo.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cs.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static struct resource pcmcia_resources[] = {
+	/* pcmcia registers */
+	{
+		/* start & end filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+
+	/* pcmcia memory zone resources */
+	{
+		.start		= BCM_PCMCIA_COMMON_BASE_PA,
+		.end		= BCM_PCMCIA_COMMON_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= BCM_PCMCIA_ATTR_BASE_PA,
+		.end		= BCM_PCMCIA_ATTR_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= BCM_PCMCIA_IO_BASE_PA,
+		.end		= BCM_PCMCIA_IO_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+
+	/* PCMCIA irq */
+	{
+		/* start filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+
+	/* declare PCMCIA IO resource also */
+	{
+		.start		= BCM_PCMCIA_IO_BASE_PA,
+		.end		= BCM_PCMCIA_IO_END_PA,
+		.flags		= IORESOURCE_IO,
+	},
+};
+
+static struct bcm63xx_pcmcia_platform_data pd;
+
+static struct platform_device bcm63xx_pcmcia_device = {
+	.name		= "bcm63xx_pcmcia",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(pcmcia_resources),
+	.resource	= pcmcia_resources,
+	.dev		= {
+		.platform_data = &pd,
+	},
+};
+
+static int __init config_pcmcia_cs(unsigned int cs,
+				   u32 base, unsigned int size)
+{
+	int ret;
+
+	ret = bcm63xx_set_cs_status(cs, 0);
+	if (!ret)
+		ret = bcm63xx_set_cs_base(cs, base, size);
+	if (!ret)
+		ret = bcm63xx_set_cs_status(cs, 1);
+	return ret;
+}
+
+static const __initdata struct {
+	unsigned int	cs;
+	unsigned int	base;
+	unsigned int	size;
+} pcmcia_cs[3] = {
+	{
+		.cs	= MPI_CS_PCMCIA_COMMON,
+		.base	= BCM_PCMCIA_COMMON_BASE_PA,
+		.size	= BCM_PCMCIA_COMMON_SIZE
+	},
+	{
+		.cs	= MPI_CS_PCMCIA_ATTR,
+		.base	= BCM_PCMCIA_ATTR_BASE_PA,
+		.size	= BCM_PCMCIA_ATTR_SIZE
+	},
+	{
+		.cs	= MPI_CS_PCMCIA_IO,
+		.base	= BCM_PCMCIA_IO_BASE_PA,
+		.size	= BCM_PCMCIA_IO_SIZE
+	},
+};
+
+int __init bcm63xx_pcmcia_register(void)
+{
+	int ret, i;
+
+	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+		return 0;
+
+	/* use correct pcmcia ready gpio depending on processor */
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6348_CPU_ID:
+		pd.ready_gpio = 22;
+		break;
+
+	case BCM6358_CPU_ID:
+		pd.ready_gpio = 18;
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
+	pcmcia_resources[0].end = pcmcia_resources[0].start +
+		RSET_PCMCIA_SIZE - 1;
+	pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA);
+
+	/* configure pcmcia chip selects */
+	for (i = 0; i < 3; i++) {
+		ret = config_pcmcia_cs(pcmcia_cs[i].cs,
+				       pcmcia_cs[i].base,
+				       pcmcia_cs[i].size);
+		if (ret)
+			goto out_err;
+	}
+
+	return platform_device_register(&bcm63xx_pcmcia_device);
+
+out_err:
+	printk(KERN_ERR "unable to set pcmcia chip select\n");
+	return ret;
+}
diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c
new file mode 100644
index 000000000000..5f3d89c4a988
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-uart.c
@@ -0,0 +1,41 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
+
+static struct resource uart_resources[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bcm63xx_uart_device = {
+	.name		= "bcm63xx_uart",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(uart_resources),
+	.resource	= uart_resources,
+};
+
+int __init bcm63xx_uart_register(void)
+{
+	uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+	uart_resources[0].end = uart_resources[0].start;
+	uart_resources[0].end += RSET_UART_SIZE - 1;
+	uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+	return platform_device_register(&bcm63xx_uart_device);
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
new file mode 100644
index 000000000000..2beb3969ce3b
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
@@ -0,0 +1,13 @@
+#ifndef BCM63XX_DEV_PCMCIA_H_
+#define BCM63XX_DEV_PCMCIA_H_
+
+/*
+ * PCMCIA driver platform data
+ */
+struct bcm63xx_pcmcia_platform_data {
+	unsigned int ready_gpio;
+};
+
+int bcm63xx_pcmcia_register(void);
+
+#endif /* BCM63XX_DEV_PCMCIA_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
new file mode 100644
index 000000000000..bf348f573bbc
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_UART_H_
+#define BCM63XX_DEV_UART_H_
+
+int bcm63xx_uart_register(void);
+
+#endif /* BCM63XX_DEV_UART_H_ */
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index e15f11a09311..af42385245d5 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -77,7 +77,18 @@ extern void play_dead(void);
 
 extern asmlinkage void smp_call_function_interrupt(void);
 
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
+}
+
+static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
+}
 
 #endif /* __ASM_SMP_H */
diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h
index 792404948571..42f66c311473 100644
--- a/arch/mips/include/asm/unaligned.h
+++ b/arch/mips/include/asm/unaligned.h
@@ -12,17 +12,17 @@
 #if defined(__MIPSEB__)
 # include <linux/unaligned/be_struct.h>
 # include <linux/unaligned/le_byteshift.h>
-# include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_be
 # define put_unaligned	__put_unaligned_be
 #elif defined(__MIPSEL__)
 # include <linux/unaligned/le_struct.h>
 # include <linux/unaligned/be_byteshift.h>
-# include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_le
 # define put_unaligned	__put_unaligned_le
 #else
 #  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
 #endif
 
+# include <linux/unaligned/generic.h>
+
 #endif /* _ASM_MIPS_UNALIGNED_H */
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index f2397f00db43..ad4e017ed2f3 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -172,13 +172,20 @@ static unsigned int translate_open_flags(int flags)
 }
 
 
-static void sp_setfsuidgid( uid_t uid, gid_t gid)
+static int sp_setfsuidgid(uid_t uid, gid_t gid)
 {
-	current->cred->fsuid = uid;
-	current->cred->fsgid = gid;
+	struct cred *new;
 
-	key_fsuid_changed(current);
-	key_fsgid_changed(current);
+	new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	new->fsuid = uid;
+	new->fsgid = gid;
+
+	commit_creds(new);
+
+	return 0;
 }
 
 /*
@@ -196,7 +203,7 @@ void sp_work_handle_request(void)
 	mm_segment_t old_fs;
 	struct timeval tv;
 	struct timezone tz;
-	int cmd;
+	int err, cmd;
 
 	char *vcwd;
 	int size;
@@ -225,8 +232,11 @@ void sp_work_handle_request(void)
 	/* Run the syscall at the privilege of the user who loaded the
 	   SP program */
 
-	if (vpe_getuid(tclimit))
-		sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+	if (vpe_getuid(tclimit)) {
+		err = sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+		if (!err)
+			pr_err("Change of creds failed\n");
+	}
 
 	switch (sc.cmd) {
 	/* needs the flags argument translating from SDE kit to
@@ -283,8 +293,11 @@ void sp_work_handle_request(void)
 		break;
  	} /* switch */
 
-	if (vpe_getuid(tclimit))
-		sp_setfsuidgid( 0, 0);
+	if (vpe_getuid(tclimit)) {
+		err = sp_setfsuidgid(0, 0);
+		if (!err)
+			pr_err("restoring old creds failed\n");
+	}
 
 	old_fs = get_fs();
 	set_fs(KERNEL_DS);
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index a10ebfdc28ae..364f066cb497 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -72,8 +72,9 @@ static void rtlx_dispatch(void)
 */
 static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
 {
+	unsigned int vpeflags;
+	unsigned long flags;
 	int i;
-	unsigned int flags, vpeflags;
 
 	/* Ought not to be strictly necessary for SMTC builds */
 	local_irq_save(flags);
@@ -392,20 +393,12 @@ out:
 
 static int file_open(struct inode *inode, struct file *filp)
 {
-	int minor = iminor(inode);
-	int err;
-
-	lock_kernel();
-	err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1);
-	unlock_kernel();
-	return err;
+	return rtlx_open(iminor(inode), (filp->f_flags & O_NONBLOCK) ? 0 : 1);
 }
 
 static int file_release(struct inode *inode, struct file *filp)
 {
-	int minor = iminor(inode);
-
-	return rtlx_release(minor);
+	return rtlx_release(iminor(inode));
 }
 
 static unsigned int file_poll(struct file *file, poll_table * wait)
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 4eb106c6a3ec..e72e6844d134 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -32,7 +32,6 @@
 #include <linux/cpumask.h>
 #include <linux/cpu.h>
 #include <linux/err.h>
-#include <linux/smp.h>
 
 #include <asm/atomic.h>
 #include <asm/cpu.h>
@@ -128,19 +127,6 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu_idle();
 }
 
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
-	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
-}
-
-/*
- * We reuse the same vector for the single IPI
- */
-void arch_send_call_function_single_ipi(int cpu)
-{
-	mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
-}
-
 /*
  * Call into both interrupt handlers, as we share the IPI for them
  */
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 67153a0dc267..4d181df44a40 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1098,9 +1098,8 @@ static void ipi_irq_dispatch(void)
 
 static struct irqaction irq_ipi = {
 	.handler	= ipi_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "SMTC_IPI",
-	.flags		= IRQF_PERCPU
+	.flags		= IRQF_DISABLED | IRQF_PERCPU,
+	.name		= "SMTC_IPI"
 };
 
 static void setup_cross_vpe_interrupts(unsigned int nvpe)
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index eb6c4c5b7fbe..03092ab2a296 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -144,14 +144,15 @@ struct tc {
 };
 
 struct {
-	/* Virtual processing elements */
-	struct list_head vpe_list;
-
-	/* Thread contexts */
-	struct list_head tc_list;
+	spinlock_t vpe_list_lock;
+	struct list_head vpe_list;	/* Virtual processing elements */
+	spinlock_t tc_list_lock;
+	struct list_head tc_list;	/* Thread contexts */
 } vpecontrol = {
-	.vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
-	.tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
+	.vpe_list_lock	= SPIN_LOCK_UNLOCKED,
+	.vpe_list	= LIST_HEAD_INIT(vpecontrol.vpe_list),
+	.tc_list_lock	= SPIN_LOCK_UNLOCKED,
+	.tc_list	= LIST_HEAD_INIT(vpecontrol.tc_list)
 };
 
 static void release_progmem(void *ptr);
@@ -159,28 +160,38 @@ static void release_progmem(void *ptr);
 /* get the vpe associated with this minor */
 static struct vpe *get_vpe(int minor)
 {
-	struct vpe *v;
+	struct vpe *res, *v;
 
 	if (!cpu_has_mipsmt)
 		return NULL;
 
+	res = NULL;
+	spin_lock(&vpecontrol.vpe_list_lock);
 	list_for_each_entry(v, &vpecontrol.vpe_list, list) {
-		if (v->minor == minor)
-			return v;
+		if (v->minor == minor) {
+			res = v;
+			break;
+		}
 	}
+	spin_unlock(&vpecontrol.vpe_list_lock);
 
-	return NULL;
+	return res;
 }
 
 /* get the vpe associated with this minor */
 static struct tc *get_tc(int index)
 {
-	struct tc *t;
+	struct tc *res, *t;
 
+	res = NULL;
+	spin_lock(&vpecontrol.tc_list_lock);
 	list_for_each_entry(t, &vpecontrol.tc_list, list) {
-		if (t->index == index)
-			return t;
+		if (t->index == index) {
+			res = t;
+			break;
+		}
 	}
+	spin_unlock(&vpecontrol.tc_list_lock);
 
 	return NULL;
 }
@@ -190,15 +201,17 @@ static struct vpe *alloc_vpe(int minor)
 {
 	struct vpe *v;
 
-	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
 		return NULL;
-	}
 
 	INIT_LIST_HEAD(&v->tc);
+	spin_lock(&vpecontrol.vpe_list_lock);
 	list_add_tail(&v->list, &vpecontrol.vpe_list);
+	spin_unlock(&vpecontrol.vpe_list_lock);
 
 	INIT_LIST_HEAD(&v->notify);
 	v->minor = minor;
+
 	return v;
 }
 
@@ -212,7 +225,10 @@ static struct tc *alloc_tc(int index)
 
 	INIT_LIST_HEAD(&tc->tc);
 	tc->index = index;
+
+	spin_lock(&vpecontrol.tc_list_lock);
 	list_add_tail(&tc->list, &vpecontrol.tc_list);
+	spin_unlock(&vpecontrol.tc_list_lock);
 
 out:
 	return tc;
@@ -227,7 +243,7 @@ static void release_vpe(struct vpe *v)
 	kfree(v);
 }
 
-static void dump_mtregs(void)
+static void __maybe_unused dump_mtregs(void)
 {
 	unsigned long val;
 
@@ -1048,20 +1064,19 @@ static int vpe_open(struct inode *inode, struct file *filp)
 	enum vpe_state state;
 	struct vpe_notifications *not;
 	struct vpe *v;
-	int ret, err = 0;
+	int ret;
 
-	lock_kernel();
 	if (minor != iminor(inode)) {
 		/* assume only 1 device at the moment. */
-		printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
-		err = -ENODEV;
-		goto out;
+		pr_warning("VPE loader: only vpe1 is supported\n");
+
+		return -ENODEV;
 	}
 
 	if ((v = get_vpe(tclimit)) == NULL) {
-		printk(KERN_WARNING "VPE loader: unable to get vpe\n");
-		err = -ENODEV;
-		goto out;
+		pr_warning("VPE loader: unable to get vpe\n");
+
+		return -ENODEV;
 	}
 
 	state = xchg(&v->state, VPE_STATE_INUSE);
@@ -1101,8 +1116,8 @@ static int vpe_open(struct inode *inode, struct file *filp)
 	v->shared_ptr = NULL;
 	v->__start = 0;
 
-out:
 	unlock_kernel();
+
 	return 0;
 }
 
@@ -1594,14 +1609,14 @@ static void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
+	device_del(&vpe_device);
+	unregister_chrdev(major, module_name);
+
+	/* No locking needed here */
 	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
-		if (v->state != VPE_STATE_UNUSED) {
+		if (v->state != VPE_STATE_UNUSED)
 			release_vpe(v);
-		}
 	}
-
-	device_del(&vpe_device);
-	unregister_chrdev(major, module_name);
 }
 
 module_init(vpe_module_init);
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index b55c2d1b998f..5ab5fa8c1d82 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -32,6 +32,11 @@ static void mips_sc_wback_inv(unsigned long addr, unsigned long size)
  */
 static void mips_sc_inv(unsigned long addr, unsigned long size)
 {
+	unsigned long lsize = cpu_scache_line_size();
+	unsigned long almask = ~(lsize - 1);
+
+	cache_op(Hit_Writeback_Inv_SD, addr & almask);
+	cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
 	blast_inv_scache_range(addr, addr + size);
 }
 
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index 655cb8dec340..deed1d5d4982 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -44,7 +44,7 @@ static struct loongson2_register_config {
 	unsigned int ctrl;
 	unsigned long long reset_counter1;
 	unsigned long long reset_counter2;
-	int cnt1_enalbed, cnt2_enalbed;
+	int cnt1_enabled, cnt2_enabled;
 } reg;
 
 DEFINE_SPINLOCK(sample_lock);
@@ -81,8 +81,8 @@ static void loongson2_reg_setup(struct op_counter_config *cfg)
 
 	reg.ctrl = ctrl;
 
-	reg.cnt1_enalbed = cfg[0].enabled;
-	reg.cnt2_enalbed = cfg[1].enabled;
+	reg.cnt1_enabled = cfg[0].enabled;
+	reg.cnt2_enabled = cfg[1].enabled;
 
 }
 
@@ -99,7 +99,7 @@ static void loongson2_cpu_setup(void *args)
 static void loongson2_cpu_start(void *args)
 {
 	/* Start all counters on current CPU */
-	if (reg.cnt1_enalbed || reg.cnt2_enalbed)
+	if (reg.cnt1_enabled || reg.cnt2_enabled)
 		write_c0_perfctrl(reg.ctrl);
 }
 
@@ -125,7 +125,7 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 	 */
 
 	/* Check whether the irq belongs to me */
-	enabled = reg.cnt1_enalbed | reg.cnt2_enalbed;
+	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
 	if (!enabled)
 		return IRQ_NONE;
 
@@ -136,12 +136,12 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 	spin_lock_irqsave(&sample_lock, flags);
 
 	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt1_enalbed)
+		if (reg.cnt1_enabled)
 			oprofile_add_sample(regs, 0);
 		counter1 = reg.reset_counter1;
 	}
 	if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt2_enalbed)
+		if (reg.cnt2_enabled)
 			oprofile_add_sample(regs, 1);
 		counter2 = reg.reset_counter2;
 	}
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 109c95ca698b..32548b5d68d6 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -385,6 +385,7 @@ int msp_pcibios_config_access(unsigned char access_type,
 	unsigned long intr;
 	unsigned long value;
 	static char pciirqflag;
+	int ret;
 #if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
 	unsigned int	vpe_status;
 #endif
@@ -402,11 +403,13 @@ int msp_pcibios_config_access(unsigned char access_type,
 	 * allocation assigns an interrupt handler to the interrupt.
 	 */
 	if (pciirqflag == 0) {
-		request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
+		ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
 				bpci_interrupt,
 				IRQF_SHARED | IRQF_DISABLED,
 				"PMC MSP PCI Host",
 				preg);
+		if (ret != 0)
+			return ret;
 		pciirqflag = ~0;
 	}
 
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 9aa8f2951df6..c6851df9ab74 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -165,7 +165,7 @@ static void ip27_send_ipi_single(int destid, unsigned int action)
 	REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
 }
 
-static void ip27_send_ipi(const struct cpumask *mask, unsigned int action)
+static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index ba59839a021e..4070268aa769 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -117,10 +117,6 @@ static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 	unsigned long flags;
 	unsigned int irq_dirty;
 
-	if (cpumask_weight(mask) != 1) {
-		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return -1;
-	}
 	i = cpumask_first(mask);
 
 	/* Convert logical CPU to physical CPU */
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 637a194e5cd5..15ea778b5e66 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -403,36 +403,31 @@ static int sbprof_zbprof_stop(void)
 static int sbprof_tb_open(struct inode *inode, struct file *filp)
 {
 	int minor;
-	int err = 0;
 
-	lock_kernel();
 	minor = iminor(inode);
-	if (minor != 0) {
-		err = -ENODEV;
-		goto out;
-	}
+	if (minor != 0)
+		return -ENODEV;
 
-	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) {
-		err = -EBUSY;
-		goto out;
-	}
+	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
+		return -EBUSY;
 
 	memset(&sbp, 0, sizeof(struct sbprof_tb));
 	sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
 	if (!sbp.sbprof_tbbuf) {
-		err = -ENOMEM;
-		goto out;
+		sbp.open = SB_CLOSED;
+		wmb();
+		return -ENOMEM;
 	}
+
 	memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
 	init_waitqueue_head(&sbp.tb_sync);
 	init_waitqueue_head(&sbp.tb_read);
 	mutex_init(&sbp.lock);
 
 	sbp.open = SB_OPEN;
+	wmb();
 
-  out:
-	unlock_kernel();
-	return err;
+	return 0;
 }
 
 static int sbprof_tb_release(struct inode *inode, struct file *filp)
@@ -440,7 +435,7 @@ static int sbprof_tb_release(struct inode *inode, struct file *filp)
 	int minor;
 
 	minor = iminor(inode);
-	if (minor != 0 || !sbp.open)
+	if (minor != 0 || sbp.open != SB_CLOSED)
 		return -ENODEV;
 
 	mutex_lock(&sbp.lock);
@@ -449,7 +444,8 @@ static int sbprof_tb_release(struct inode *inode, struct file *filp)
 		sbprof_zbprof_stop();
 
 	vfree(sbp.sbprof_tbbuf);
-	sbp.open = 0;
+	sbp.open = SB_CLOSED;
+	wmb();
 
 	mutex_unlock(&sbp.lock);
 
@@ -583,7 +579,8 @@ static int __init sbprof_tb_init(void)
 	}
 	tb_dev = dev;
 
-	sbp.open = 0;
+	sbp.open = SB_CLOSED;
+	wmb();
 	tb_period = zbbus_mhz * 10000LL;
 	pr_info(DEVNAME ": initialized - tb_period = %lld\n",
 		(long long) tb_period);
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 623ffc933c4c..5277aac96b0f 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -106,7 +106,7 @@ void read_persistent_clock(struct timespec *ts)
 		break;
 	}
 	ts->tv_sec = sec;
-	tv->tv_nsec = 0;
+	ts->tv_nsec = 0;
 }
 
 int rtc_mips_set_time(unsigned long sec)
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index 8a3a4dd55763..167e10ff06d9 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -129,42 +129,47 @@ extern int fixup_exception(struct pt_regs *regs);
 struct __large_struct { unsigned long buf[100]; };
 #define __m(x) (*(struct __large_struct *)(x))
 
-#define __get_user_nocheck(x, ptr, size)	\
-({						\
-	__typeof(*(ptr)) __gu_val;		\
-	unsigned long __gu_addr;		\
-	int __gu_err;				\
-	__gu_addr = (unsigned long) (ptr);	\
-	switch (size) {				\
-	case 1:  __get_user_asm("bu"); break;	\
-	case 2:  __get_user_asm("hu"); break;	\
-	case 4:  __get_user_asm(""  ); break;	\
-	default: __get_user_unknown(); break;	\
-	}					\
-	x = (__typeof__(*(ptr))) __gu_val;	\
-	__gu_err;				\
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	unsigned long __gu_addr;					\
+	int __gu_err;							\
+	__gu_addr = (unsigned long) (ptr);				\
+	switch (size) {							\
+	case 1: {							\
+		unsigned char __gu_val;					\
+		__get_user_asm("bu");					\
+		(x) = *(__force __typeof__(*(ptr))*) &__gu_val;		\
+		break;							\
+	}								\
+	case 2: {							\
+		unsigned short __gu_val;				\
+		__get_user_asm("hu");					\
+		(x) = *(__force __typeof__(*(ptr))*) &__gu_val;		\
+		break;							\
+	}								\
+	case 4: {							\
+		unsigned int __gu_val;					\
+		__get_user_asm("");					\
+		(x) = *(__force __typeof__(*(ptr))*) &__gu_val;		\
+		break;							\
+	}								\
+	default:							\
+		__get_user_unknown();					\
+		break;							\
+	}								\
+	__gu_err;							\
 })
 
-#define __get_user_check(x, ptr, size)			\
-({							\
-	__typeof__(*(ptr)) __gu_val;			\
-	unsigned long __gu_addr;			\
-	int __gu_err;					\
-	__gu_addr = (unsigned long) (ptr);		\
-	if (likely(__access_ok(__gu_addr,size))) {	\
-		switch (size) {				\
-		case 1:  __get_user_asm("bu"); break;	\
-		case 2:  __get_user_asm("hu"); break;	\
-		case 4:  __get_user_asm(""  ); break;	\
-		default: __get_user_unknown(); break;	\
-		}					\
-	}						\
-	else {						\
-		__gu_err = -EFAULT;			\
-		__gu_val = 0;				\
-	}						\
-	x = (__typeof__(*(ptr))) __gu_val;		\
-	__gu_err;					\
+#define __get_user_check(x, ptr, size)					\
+({									\
+	int _e;								\
+	if (likely(__access_ok((unsigned long) (ptr), (size))))		\
+		_e = __get_user_nocheck((x), (ptr), (size));		\
+	else {								\
+		_e = -EFAULT;						\
+		(x) = (__typeof__(x))0;					\
+	}								\
+	_e;								\
 })
 
 #define __get_user_asm(INSN)					\
diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h
index 8b450e920af1..2a0bf79ab968 100644
--- a/arch/mn10300/unit-asb2303/include/unit/clock.h
+++ b/arch/mn10300/unit-asb2303/include/unit/clock.h
@@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk;	/* IOCLK (crystal speed) in HZ */
 extern unsigned long mn10300_iobclk;
 extern unsigned long mn10300_tsc_per_HZ;
 
-#define MN10300_IOCLK		((unsigned long)mn10300_ioclk)
+#define MN10300_IOCLK		mn10300_ioclk
 /* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK	((unsigned long)mn10300_iobclk) */
+/* #define MN10300_IOBCLK	mn10300_iobclk */
 
 #else /* !CONFIG_MN10300_RTC */
 
@@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ;
 #define MN10300_TSCCLK		MN10300_IOCLK
 
 #ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ	((unsigned long)mn10300_tsc_per_HZ)
+#define MN10300_TSC_PER_HZ	mn10300_tsc_per_HZ
 #else /* !CONFIG_MN10300_RTC */
 #define MN10300_TSC_PER_HZ	(MN10300_TSCCLK/HZ)
 #endif /* !CONFIG_MN10300_RTC */
diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h
index 7d514841ffda..67be3f2eb18e 100644
--- a/arch/mn10300/unit-asb2305/include/unit/clock.h
+++ b/arch/mn10300/unit-asb2305/include/unit/clock.h
@@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk;	/* IOCLK (crystal speed) in HZ */
 extern unsigned long mn10300_iobclk;
 extern unsigned long mn10300_tsc_per_HZ;
 
-#define MN10300_IOCLK		((unsigned long)mn10300_ioclk)
+#define MN10300_IOCLK		mn10300_ioclk
 /* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK	((unsigned long)mn10300_iobclk) */
+/* #define MN10300_IOBCLK	mn10300_iobclk */
 
 #else /* !CONFIG_MN10300_RTC */
 
@@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ;
 #define MN10300_TSCCLK		MN10300_IOCLK
 
 #ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ	((unsigned long)mn10300_tsc_per_HZ)
+#define MN10300_TSC_PER_HZ	mn10300_tsc_per_HZ
 #else /* !CONFIG_MN10300_RTC */
 #define MN10300_TSC_PER_HZ	(MN10300_TSCCLK/HZ)
 #endif /* !CONFIG_MN10300_RTC */
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index f388dc68f605..524d9352f17e 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -18,6 +18,7 @@ config PARISC
 	select BUG
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
+	select HAVE_ARCH_TRACEHOOK
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/fixmap.h b/arch/parisc/include/asm/fixmap.h
index de3fe3a18229..6fec4d4a1a18 100644
--- a/arch/parisc/include/asm/fixmap.h
+++ b/arch/parisc/include/asm/fixmap.h
@@ -21,9 +21,9 @@
 #define KERNEL_MAP_END		(TMPALIAS_MAP_START)
 
 #ifndef __ASSEMBLY__
-extern void *vmalloc_start;
+extern void *parisc_vmalloc_start;
 #define PCXL_DMA_MAP_SIZE	(8*1024*1024)
-#define VMALLOC_START		((unsigned long)vmalloc_start)
+#define VMALLOC_START		((unsigned long)parisc_vmalloc_start)
 #define VMALLOC_END		(KERNEL_MAP_END)
 #endif /*__ASSEMBLY__*/
 
diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h
index ce93133d5112..0d68184a76cb 100644
--- a/arch/parisc/include/asm/hardirq.h
+++ b/arch/parisc/include/asm/hardirq.h
@@ -1,29 +1,11 @@
 /* hardirq.h: PA-RISC hard IRQ support.
  *
  * Copyright (C) 2001 Matthew Wilcox <matthew@wil.cx>
- *
- * The locking is really quite interesting.  There's a cpu-local
- * count of how many interrupts are being handled, and a global
- * lock.  An interrupt can only be serviced if the global lock
- * is free.  You can't be sure no more interrupts are being
- * serviced until you've acquired the lock and then checked
- * all the per-cpu interrupt counts are all zero.  It's a specialised
- * br_lock, and that's exactly how Sparc does it.  We don't because
- * it's more locking for us.  This way is lock-free in the interrupt path.
  */
 
 #ifndef _PARISC_HARDIRQ_H
 #define _PARISC_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
-	unsigned long __softirq_pending; /* set_bit is used on this */
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-void ack_bad_irq(unsigned int irq);
+#include <asm-generic/hardirq.h>
 
 #endif /* _PARISC_HARDIRQ_H */
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index 302f68dc889c..aead40b16dd8 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -59,8 +59,11 @@ void user_enable_block_step(struct task_struct *task);
 #define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
 #define user_space(regs)		(((regs)->iasq[1] != 0) ? 1 : 0)
 #define instruction_pointer(regs)	((regs)->iaoq[0] & ~3)
+#define user_stack_pointer(regs)	((regs)->gr[30])
 unsigned long profile_pc(struct pt_regs *);
 extern void show_regs(struct pt_regs *);
-#endif
+
+
+#endif /* __KERNEL__ */
 
 #endif
diff --git a/arch/parisc/include/asm/syscall.h b/arch/parisc/include/asm/syscall.h
new file mode 100644
index 000000000000..8bdfd2c8c39f
--- /dev/null
+++ b/arch/parisc/include/asm/syscall.h
@@ -0,0 +1,40 @@
+/* syscall.h */
+
+#ifndef _ASM_PARISC_SYSCALL_H_
+#define _ASM_PARISC_SYSCALL_H_
+
+#include <linux/err.h>
+#include <asm/ptrace.h>
+
+static inline long syscall_get_nr(struct task_struct *tsk,
+				  struct pt_regs *regs)
+{
+	return regs->gr[20];
+}
+
+static inline void syscall_get_arguments(struct task_struct *tsk,
+					 struct pt_regs *regs, unsigned int i,
+					 unsigned int n, unsigned long *args)
+{
+	BUG_ON(i);
+
+	switch (n) {
+	case 6:
+		args[5] = regs->gr[21];
+	case 5:
+		args[4] = regs->gr[22];
+	case 4:
+		args[3] = regs->gr[23];
+	case 3:
+		args[2] = regs->gr[24];
+	case 2:
+		args[1] = regs->gr[25];
+	case 1:
+		args[0] = regs->gr[26];
+		break;
+	default:
+		BUG();
+	}
+}
+
+#endif /*_ASM_PARISC_SYSCALL_H_*/
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index ac775a76bff7..7ecc1039cfed 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -32,6 +32,11 @@ struct thread_info {
 #define init_thread_info        (init_thread_union.thread_info)
 #define init_stack              (init_thread_union.stack)
 
+/* how to get the thread information struct from C */
+#define current_thread_info()	((struct thread_info *)mfctl(30))
+
+#endif /* !__ASSEMBLY */
+
 /* thread information allocation */
 
 #define THREAD_SIZE_ORDER            2
@@ -40,11 +45,6 @@ struct thread_info {
 #define THREAD_SIZE             (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_SHIFT            (PAGE_SHIFT + THREAD_SIZE_ORDER)
 
-/* how to get the thread information struct from C */
-#define current_thread_info()	((struct thread_info *)mfctl(30))
-
-#endif /* !__ASSEMBLY */
-
 #define PREEMPT_ACTIVE_BIT	28
 #define PREEMPT_ACTIVE		(1 << PREEMPT_ACTIVE_BIT)
 
@@ -60,6 +60,8 @@ struct thread_info {
 #define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
 #define TIF_FREEZE		7	/* is freezing for suspend */
 #define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
+#define TIF_SINGLESTEP		9	/* single stepping? */
+#define TIF_BLOCKSTEP		10	/* branch stepping? */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
@@ -69,6 +71,8 @@ struct thread_info {
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
 
 #define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
                                  _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 699cf8ef2118..fcd3c707bf12 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -270,8 +270,8 @@ int main(void)
 	DEFINE(DTLB_OFF_COUNT, offsetof(struct pdc_cache_info, dt_off_count));
 	DEFINE(DTLB_LOOP, offsetof(struct pdc_cache_info, dt_loop));
 	BLANK();
-	DEFINE(PA_BLOCKSTEP_BIT, 31-PT_BLOCKSTEP_BIT);
-	DEFINE(PA_SINGLESTEP_BIT, 31-PT_SINGLESTEP_BIT);
+	DEFINE(TIF_BLOCKSTEP_PA_BIT, 31-TIF_BLOCKSTEP);
+	DEFINE(TIF_SINGLESTEP_PA_BIT, 31-TIF_SINGLESTEP);
 	BLANK();
 	DEFINE(ASM_PMD_SHIFT, PMD_SHIFT);
 	DEFINE(ASM_PGDIR_SHIFT, PGDIR_SHIFT);
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 8c4712b74dc1..3a44f7f704fa 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -2047,12 +2047,13 @@ syscall_do_signal:
 	b,n     syscall_check_sig
 
 syscall_restore:
-	/* Are we being ptraced? */
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
 
-	ldw	TASK_PTRACE(%r1), %r19
-	bb,<	%r19,31,syscall_restore_rfi
-	nop
+	/* Are we being ptraced? */
+	ldw	TASK_FLAGS(%r1),%r19
+	ldi	(_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2
+	and,COND(=)	%r19,%r2,%r0
+	b,n	syscall_restore_rfi
 
 	ldo	TASK_PT_FR31(%r1),%r19		   /* reload fpregs */
 	rest_fp	%r19
@@ -2113,16 +2114,16 @@ syscall_restore_rfi:
 	ldi	0x0b,%r20			   /* Create new PSW */
 	depi	-1,13,1,%r20			   /* C, Q, D, and I bits */
 
-	/* The values of PA_SINGLESTEP_BIT and PA_BLOCKSTEP_BIT are
-	 * set in include/linux/ptrace.h and converted to PA bitmap
+	/* The values of SINGLESTEP_BIT and BLOCKSTEP_BIT are
+	 * set in thread_info.h and converted to PA bitmap
 	 * numbers in asm-offsets.c */
 
-	/* if ((%r19.PA_SINGLESTEP_BIT)) { %r20.27=1} */
-	extru,=	%r19,PA_SINGLESTEP_BIT,1,%r0
+	/* if ((%r19.SINGLESTEP_BIT)) { %r20.27=1} */
+	extru,=	%r19,TIF_SINGLESTEP_PA_BIT,1,%r0
 	depi	-1,27,1,%r20			   /* R bit */
 
-	/* if ((%r19.PA_BLOCKSTEP_BIT)) { %r20.7=1} */
-	extru,= %r19,PA_BLOCKSTEP_BIT,1,%r0
+	/* if ((%r19.BLOCKSTEP_BIT)) { %r20.7=1} */
+	extru,= %r19,TIF_BLOCKSTEP_PA_BIT,1,%r0
 	depi	-1,7,1,%r20			   /* T bit */
 
 	STREG	%r20,TASK_PT_PSW(%r1)
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 330f536a9324..2e7610cb33d5 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -423,8 +423,3 @@ void __init init_IRQ(void)
         set_eiem(cpu_eiem);	/* EIEM : enable all external intr */
 
 }
-
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_WARNING "unexpected IRQ %d\n", irq);
-}
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index 61ee0eec4e69..212074653df7 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -893,7 +893,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 	 * ourselves */
 	for (i = 1; i < hdr->e_shnum; i++) {
 		if(sechdrs[i].sh_type == SHT_SYMTAB
-		   && (sechdrs[i].sh_type & SHF_ALLOC)) {
+		   && (sechdrs[i].sh_flags & SHF_ALLOC)) {
 			int strindex = sechdrs[i].sh_link;
 			/* FIXME: AWFUL HACK
 			 * The cast is to drop the const from
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 927db3668b6f..c4f49e45129d 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/user.h>
 #include <linux/personality.h>
 #include <linux/security.h>
@@ -35,7 +36,8 @@
  */
 void ptrace_disable(struct task_struct *task)
 {
-	task->ptrace &= ~(PT_SINGLESTEP|PT_BLOCKSTEP);
+	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+	clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
 
 	/* make sure the trap bits are not set */
 	pa_psw(task)->r = 0;
@@ -55,8 +57,8 @@ void user_disable_single_step(struct task_struct *task)
 
 void user_enable_single_step(struct task_struct *task)
 {
-	task->ptrace &= ~PT_BLOCKSTEP;
-	task->ptrace |= PT_SINGLESTEP;
+	clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
+	set_tsk_thread_flag(task, TIF_SINGLESTEP);
 
 	if (pa_psw(task)->n) {
 		struct siginfo si;
@@ -98,8 +100,8 @@ void user_enable_single_step(struct task_struct *task)
 
 void user_enable_block_step(struct task_struct *task)
 {
-	task->ptrace &= ~PT_SINGLESTEP;
-	task->ptrace |= PT_BLOCKSTEP;
+	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+	set_tsk_thread_flag(task, TIF_BLOCKSTEP);
 
 	/* Enable taken branch trap. */
 	pa_psw(task)->r = 0;
@@ -263,22 +265,20 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 }
 #endif
 
+long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		return -1L;
+
+	return regs->gr[20];
+}
 
-void syscall_trace(void)
+void do_syscall_trace_exit(struct pt_regs *regs)
 {
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	int stepping = test_thread_flag(TIF_SINGLESTEP) ||
+		test_thread_flag(TIF_BLOCKSTEP);
+
+	if (stepping || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, stepping);
 }
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 8eb3c63c407a..e8467e4aa8d1 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/wait.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/unistd.h>
 #include <linux/stddef.h>
 #include <linux/compat.h>
@@ -34,7 +35,6 @@
 #include <asm/asm-offsets.h>
 
 #ifdef CONFIG_COMPAT
-#include <linux/compat.h>
 #include "signal32.h"
 #endif
 
@@ -468,6 +468,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 		sigaddset(&current->blocked,sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	tracehook_signal_handler(sig, info, ka, regs, 0);
+
 	return 1;
 }
 
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 59fc1a43ec3e..f5f96021caa0 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -288,18 +288,23 @@ tracesys:
 	STREG	%r18,PT_GR18(%r2)
 	/* Finished saving things for the debugger */
 
-	ldil	L%syscall_trace,%r1
+	copy	%r2,%r26
+	ldil	L%do_syscall_trace_enter,%r1
 	ldil	L%tracesys_next,%r2
-	be	R%syscall_trace(%sr7,%r1)
+	be	R%do_syscall_trace_enter(%sr7,%r1)
 	ldo	R%tracesys_next(%r2),%r2
 	
-tracesys_next:	
+tracesys_next:
+	/* do_syscall_trace_enter either returned the syscallno, or -1L,
+	 *  so we skip restoring the PT_GR20 below, since we pulled it from
+	 *  task->thread.regs.gr[20] above.
+	 */
+	copy	%ret0,%r20
 	ldil	L%sys_call_table,%r1
 	ldo     R%sys_call_table(%r1), %r19
 
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	TI_TASK(%r1), %r1
-	LDREG   TASK_PT_GR20(%r1), %r20
 	LDREG   TASK_PT_GR26(%r1), %r26		/* Restore the users args */
 	LDREG   TASK_PT_GR25(%r1), %r25
 	LDREG   TASK_PT_GR24(%r1), %r24
@@ -336,7 +341,8 @@ tracesys_exit:
 #ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
-	bl	syscall_trace, %r2
+	ldo	TASK_REGS(%r1),%r26
+	bl	do_syscall_trace_exit,%r2
 	STREG   %r28,TASK_PT_GR28(%r1)          /* save return value now */
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	TI_TASK(%r1), %r1
@@ -353,12 +359,12 @@ tracesys_exit:
 
 tracesys_sigexit:
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
-	LDREG	0(%r1), %r1
+	LDREG	TI_TASK(%r1), %r1
 #ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
-	bl	syscall_trace, %r2
-	nop
+	bl	do_syscall_trace_exit,%r2
+	ldo	TASK_REGS(%r1),%r26
 
 	ldil	L%syscall_exit_rfi,%r1
 	be,n	R%syscall_exit_rfi(%sr7,%r1)
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 775be2791bc2..fda4baa059b5 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -28,6 +28,7 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
 	
 /* ld script to make hppa Linux kernel */
 #ifndef CONFIG_64BIT
@@ -134,6 +135,15 @@ SECTIONS
 	__init_begin = .;
 	INIT_TEXT_SECTION(16384)
 	INIT_DATA_SECTION(16)
+	/* we have to discard exit text and such at runtime, not link time */
+	.exit.text :
+	{
+		EXIT_TEXT
+	}
+	.exit.data :
+	{
+		EXIT_DATA
+	}
 
 	PERCPU(PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index d5aca31fddbb..13b6e3e59b99 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -434,8 +434,8 @@ void mark_rodata_ro(void)
 #define SET_MAP_OFFSET(x) ((void *)(((unsigned long)(x) + VM_MAP_OFFSET) \
 				     & ~(VM_MAP_OFFSET-1)))
 
-void *vmalloc_start __read_mostly;
-EXPORT_SYMBOL(vmalloc_start);
+void *parisc_vmalloc_start __read_mostly;
+EXPORT_SYMBOL(parisc_vmalloc_start);
 
 #ifdef CONFIG_PA11
 unsigned long pcxl_dma_start __read_mostly;
@@ -496,13 +496,14 @@ void __init mem_init(void)
 #ifdef CONFIG_PA11
 	if (hppa_dma_ops == &pcxl_dma_ops) {
 		pcxl_dma_start = (unsigned long)SET_MAP_OFFSET(MAP_START);
-		vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start + PCXL_DMA_MAP_SIZE);
+		parisc_vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start
+						+ PCXL_DMA_MAP_SIZE);
 	} else {
 		pcxl_dma_start = 0;
-		vmalloc_start = SET_MAP_OFFSET(MAP_START);
+		parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
 	}
 #else
-	vmalloc_start = SET_MAP_OFFSET(MAP_START);
+	parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
 #endif
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index cee8080aa245..dd3860846f15 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -210,7 +210,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 4c36186ef946..8e9be6bfe23e 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -199,7 +199,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 
 			rtc@50 {
 				compatible = "at,24c08";
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index de30b3f9eb26..82ff2b13bc37 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -247,7 +247,6 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -256,7 +255,6 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index d13cb11ce623..e45a63be3a86 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -251,7 +251,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -260,7 +259,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index e297d8b41875..0c3902bc5b6a 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -223,7 +223,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -232,7 +231,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 7be8ca038676..6ca4fc144a33 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -222,7 +222,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 
 			rtc@68 {
 				compatible = "dallas,ds1339";
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c2b8dbfab79e..c353dac33416 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -209,7 +209,6 @@
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
 			interrupt-parent = < &ipic >;
-			fsl5200-clocking;
 		};
 
 		i2c@1720 {
@@ -220,7 +219,6 @@
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
 			interrupt-parent = < &ipic >;
-			fsl5200-clocking;
 		};
 
 		i2c@1740 {
@@ -231,7 +229,6 @@
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
 			interrupt-parent = < &ipic >;
-			fsl5200-clocking;
 		};
 
 		i2ccontrol@1760 {
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
new file mode 100644
index 000000000000..b72a7581d798
--- /dev/null
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -0,0 +1,332 @@
+/*
+ * Manroland mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "manroland,mucmc52";
+	compatible = "manroland,mucmc52";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		gpt0: timer@600 {	// GPT 0 in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 { /* PSC1 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 { /* PSC2 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>; 	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>; 	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IDSEL 0x10 */
+				0x8000 0 0 1 &mpc5200_pic 0 3 3
+				0x8000 0 0 2 &mpc5200_pic 0 3 3
+				0x8000 0 0 3 &mpc5200_pic 0 2 3
+				0x8000 0 0 4 &mpc5200_pic 0 1 3
+				>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00020000>;
+			};
+			partition@760000 {
+				label = "red. Env";
+				reg = <0x00760000 0x00020000>;
+			};
+			partition@780000 {
+				label = "reserve";
+				reg = <0x00780000 0x00080000>;
+			};
+		};
+
+		simple100: gpio-controller-100@3,600100 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600100 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple104: gpio-controller-104@3,600104 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600104 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple200: gpio-controller-200@3,600200 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600200 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple201: gpio-controller-201@3,600201 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600201 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple202: gpio-controller-202@3,600202 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600202 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple203: gpio-controller-203@3,600203 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600203 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple204: gpio-controller-204@3,600204 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600204 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple206: gpio-controller-206@3,600206 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600206 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple207: gpio-controller-207@3,600207 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600207 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple20f: gpio-controller-20f@3,60020f {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x0060020f 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 30bfdc04c6df..8a4ec30b21ae 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -244,7 +244,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -253,7 +252,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 030042678392..85d857a5d46e 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -244,7 +244,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -253,7 +252,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c9590b58b7b0..1db07f6cf133 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -160,7 +160,6 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 
 			 rtc@68 {
 				compatible = "dallas,ds1307";
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
new file mode 100644
index 000000000000..019264c62904
--- /dev/null
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -0,0 +1,284 @@
+/*
+ * Manroland uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "manroland,uc101";
+	compatible = "manroland,uc101";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		gpt0: timer@600 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 { /* PSC1 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 { /* PSC2 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2c00 {		/* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			fsl,preserve-clocking;
+			clock-frequency = <400000>;
+
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00010000>;
+			};
+			partition@750000 {
+				label = "red. Env";
+				reg = <0x00750000 0x00010000>;
+			};
+			partition@760000 {
+				label = "reserve";
+				reg = <0x00760000 0x000a0000>;
+			};
+		};
+
+	};
+};
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 3838b77b8116..0396ce7bffc6 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:47:44 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:22 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -118,6 +124,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -140,7 +158,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -219,11 +237,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -239,9 +259,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -252,6 +273,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -328,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -342,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -367,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -457,6 +482,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -495,10 +521,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -519,7 +541,6 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -558,14 +579,14 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -636,6 +657,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -646,6 +668,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -666,23 +689,23 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -713,25 +736,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -775,11 +785,12 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
@@ -866,6 +877,10 @@ CONFIG_USB_STORAGE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -885,10 +900,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -959,12 +977,12 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1064,6 +1082,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1073,6 +1092,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1090,10 +1110,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1105,11 +1129,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1118,23 +1143,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1159,7 +1186,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1200,11 +1226,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 29b0f34488f5..f5c07fd72239 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:04 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:24 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,12 +56,14 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -78,11 +84,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -106,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,6 +125,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -127,14 +140,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -228,11 +246,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -248,9 +268,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -264,6 +285,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -348,6 +370,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -362,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -387,6 +411,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -397,6 +422,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -431,7 +457,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -454,10 +482,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -475,6 +499,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -483,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -502,7 +529,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -514,11 +540,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -540,6 +569,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -568,6 +598,7 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -586,14 +617,17 @@ CONFIG_PATA_MPC52xx=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -640,9 +674,12 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -661,6 +698,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -686,10 +725,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -759,6 +795,7 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -787,6 +824,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -812,23 +850,23 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -847,30 +885,18 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -913,6 +939,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -932,10 +962,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -992,12 +1025,12 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1041,6 +1074,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1050,6 +1084,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1067,10 +1102,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1082,11 +1121,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1095,23 +1135,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1136,7 +1178,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1178,11 +1219,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 07b6b266ea95..4f77a1bdc8f9 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:22 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:22 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -118,6 +124,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -140,7 +158,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,11 +238,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -240,9 +260,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -253,6 +274,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -329,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -343,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -368,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -458,6 +483,7 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -483,6 +509,7 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -506,10 +533,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -532,6 +555,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -540,7 +564,6 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -579,14 +602,14 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -647,6 +670,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -657,6 +681,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -676,22 +701,28 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -738,6 +769,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -747,9 +780,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -775,25 +806,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -817,7 +835,7 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -866,6 +884,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -893,6 +912,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -912,10 +935,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -986,12 +1012,12 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1091,6 +1117,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1100,6 +1127,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1117,10 +1145,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1132,11 +1164,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1145,23 +1178,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1186,7 +1221,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1227,11 +1261,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index afb1a3d1ef0a..f9168c1a2fa5 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:42 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -79,11 +85,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -105,7 +112,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -118,6 +124,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_PCI_QUIRKS=y
 CONFIG_COMPAT_BRK=y
@@ -125,7 +138,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -133,7 +145,13 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +164,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -227,11 +245,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -247,9 +267,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -336,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -350,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -375,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -382,9 +406,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -467,6 +491,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -492,10 +517,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -515,6 +536,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -536,6 +558,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -564,6 +587,7 @@ CONFIG_PATA_MPC52xx=m
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -582,14 +606,17 @@ CONFIG_PATA_MPC52xx=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -636,16 +663,16 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -722,6 +749,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -750,6 +778,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -776,23 +805,23 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -811,30 +840,18 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -871,15 +888,17 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_SOC is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 # CONFIG_USB_OHCI_HCD_PCI is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -995,6 +1014,7 @@ CONFIG_RTC_DRV_PCF8563=m
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1022,6 +1042,10 @@ CONFIG_RTC_DRV_PCF8563=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1041,12 +1065,16 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1114,7 +1142,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1210,6 +1238,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1223,23 +1252,12 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 8585c7c12861..75c835c2ae66 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:57 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:23 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -118,6 +124,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -145,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -225,11 +243,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -245,9 +265,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -258,6 +279,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -334,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -348,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,6 +397,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -382,9 +407,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -464,6 +489,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -502,10 +528,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -529,6 +551,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -538,7 +561,6 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -577,14 +599,14 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -654,6 +676,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -664,6 +687,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -685,22 +709,28 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -747,6 +777,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -756,9 +788,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -789,25 +819,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -851,11 +868,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
@@ -969,6 +987,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -996,6 +1015,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1015,10 +1038,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1089,12 +1115,12 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1194,6 +1220,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1203,6 +1230,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1220,10 +1248,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1235,11 +1267,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1248,23 +1281,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1289,7 +1324,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1331,11 +1365,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index aaa4416660e9..523d5fe18c0e 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Mon Apr 20 11:06:25 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:21 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,12 +57,14 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -79,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -103,7 +110,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -116,6 +122,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -124,14 +137,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -205,7 +223,7 @@ CONFIG_RTAS_PROC=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_PPC_BESTCOMM_ATA=y
 CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=y
 
 #
 # Kernel options
@@ -229,11 +247,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -249,9 +269,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -265,6 +286,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -349,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -363,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -388,6 +412,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -397,9 +422,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -458,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -493,6 +519,7 @@ CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -529,7 +556,9 @@ CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -552,10 +581,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -572,6 +597,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -580,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -599,7 +627,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -611,11 +638,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -637,6 +667,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -665,6 +696,7 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -684,14 +716,17 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -739,16 +774,17 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -854,6 +890,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
@@ -883,6 +920,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -910,10 +948,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -935,6 +969,11 @@ CONFIG_SPI_MPC52xx_PSC=m
 #
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -957,16 +996,27 @@ CONFIG_GPIOLIB=y
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -1019,6 +1069,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1031,9 +1083,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1073,31 +1123,20 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 CONFIG_DRM=y
 # CONFIG_DRM_TDFX is not set
 # CONFIG_DRM_R128 is not set
@@ -1167,6 +1206,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_TDO24M is not set
@@ -1198,7 +1238,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1217,10 +1256,11 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 # CONFIG_HID_CHICONY is not set
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1231,10 +1271,11 @@ CONFIG_HID_EZKEY=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1261,15 +1302,17 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1400,6 +1443,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1411,6 +1455,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1434,6 +1479,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1453,10 +1502,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1533,12 +1585,12 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1624,6 +1676,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1633,6 +1686,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1650,10 +1704,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1665,11 +1723,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1678,23 +1737,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1719,7 +1780,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1761,11 +1821,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
new file mode 100644
index 000000000000..18af46036258
--- /dev/null
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -0,0 +1,2199 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc5
+# Fri Oct 16 11:37:15 2009
+#
+CONFIG_PPC64=y
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_64 is not set
+CONFIG_PPC_BOOK3E_64=y
+CONFIG_PPC_BOOK3E=y
+CONFIG_PPC_FPU=y
+CONFIG_BOOKE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_64=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+CONFIG_PPC_PERF_CTRS=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
+CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_TASK_XACCT is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_U3_DART is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPU Frequency drivers
+#
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
+CONFIG_MAX_ACTIVE_REGIONS=256
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_PPC_HAS_HASH_64K is not set
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
+# CONFIG_SCHED_SMT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HAS_RAPIDIO is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
+CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+# CONFIG_NF_CONNTRACK_SANE is not set
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+# CONFIG_IEEE1394_PCILYNX is not set
+CONFIG_IEEE1394_SBP2=m
+CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+CONFIG_WINDFARM=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=m
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=y
+CONFIG_ACENIC_OMIT_TIGON_I=y
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+CONFIG_IXGB=m
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+CONFIG_TR=y
+CONFIG_IBMOL=y
+# CONFIG_3C359 is not set
+# CONFIG_TMS380TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+CONFIG_I2C_AMD8111=y
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_IBM_GXT4500=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_PCMCIA=y
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+CONFIG_USB_APPLEDISPLAY=m
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+# CONFIG_INFINIBAND_AMSO1100 is not set
+# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+# CONFIG_EDAC_CPC925 is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
+CONFIG_CODE_PATCHING_SELFTEST=y
+CONFIG_FTR_FIXUP_SELFTEST=y
+CONFIG_MSI_BITMAP_SELFTEST=y
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
+CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 3a179827528d..20778a405d7a 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -37,7 +37,7 @@
 #define FW_FEATURE_VIO		ASM_CONST(0x0000000000004000)
 #define FW_FEATURE_RDMA		ASM_CONST(0x0000000000008000)
 #define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK		ASM_CONST(0x0000000000020000)
+#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000000020000)
 #define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
 #define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
 #define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
@@ -45,8 +45,7 @@
 #define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
 #define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
 #define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_CMO		ASM_CONST(0x0000000004000000)
+#define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
 
 #ifndef __ASSEMBLY__
 
@@ -58,8 +57,9 @@ enum {
 		FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
 		FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
 		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
-		FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
-		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
+		FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
+		FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
+		FW_FEATURE_CMO,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
 	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 0b9c9135922e..03c862b6a9c4 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -711,6 +711,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_750,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
+		.oprofile_cpu_type      = "ppc/750",
+		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 745/755 */
 		.pvr_mask		= 0xfffff000,
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 900e0eea0099..9763267e38b4 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -658,42 +658,43 @@ do_work:
 	cmpdi	r0,0
 	crandc	eq,cr1*4+eq,eq
 	bne	restore
-	/* here we are preempting the current task */
-1:
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	.trace_hardirqs_on
-	/* Note: we just clobbered r10 which used to contain the previous
-	 * MSR before the hard-disabling done by the caller of do_work.
-	 * We don't have that value anymore, but it doesn't matter as
-	 * we will hard-enable unconditionally, we can just reload the
-	 * current MSR into r10
+
+	/* Here we are preempting the current task.
+	 *
+	 * Ensure interrupts are soft-disabled. We also properly mark
+	 * the PACA to reflect the fact that they are hard-disabled
+	 * and trace the change
 	 */
-	mfmsr	r10
-#endif /* CONFIG_TRACE_IRQFLAGS */
-	li	r0,1
+	li	r0,0
 	stb	r0,PACASOFTIRQEN(r13)
 	stb	r0,PACAHARDIRQEN(r13)
+	TRACE_DISABLE_INTS
+
+	/* Call the scheduler with soft IRQs off */
+1:	bl	.preempt_schedule_irq
+
+	/* Hard-disable interrupts again (and update PACA) */
 #ifdef CONFIG_PPC_BOOK3E
-	wrteei	1
-	bl	.preempt_schedule
 	wrteei	0
 #else
-	ori	r10,r10,MSR_EE
-	mtmsrd	r10,1		/* reenable interrupts */
-	bl	.preempt_schedule
 	mfmsr	r10
-	clrrdi	r9,r1,THREAD_SHIFT
-	rldicl	r10,r10,48,1	/* disable interrupts again */
+	rldicl	r10,r10,48,1
 	rotldi	r10,r10,16
 	mtmsrd	r10,1
 #endif /* CONFIG_PPC_BOOK3E */
+	li	r0,0
+	stb	r0,PACAHARDIRQEN(r13)
+
+	/* Re-test flags and eventually loop */
+	clrrdi	r9,r1,THREAD_SHIFT
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
 	b	restore
 
 user_work:
-#endif
+#endif /* CONFIG_PREEMPT */
+
 	/* Enable interrupts */
 #ifdef CONFIG_PPC_BOOK3E
 	wrteei	1
@@ -1038,8 +1039,7 @@ _GLOBAL(mod_return_to_handler)
 	 * We are in a module using the module's TOC.
 	 * Switch to our TOC to run inside the core kernel.
 	 */
-	LOAD_REG_IMMEDIATE(r4,ftrace_return_to_handler)
-	ld	r2, 8(r4)
+	ld	r2, PACATOC(r13)
 
 	bl	.ftrace_return_to_handler
 	nop
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index fe8f71dd0b3f..641c74bb8e27 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -282,12 +282,6 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
 	unsigned long *ptr = gdb_regs;
 	int reg;
-#ifdef CONFIG_SPE
-	union {
-		u32 v32[2];
-		u64 v64;
-	} acc;
-#endif
 
 	for (reg = 0; reg < 32; reg++)
 		UNPACK64(regs->gpr[reg], ptr);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index bb8209e34931..e8dfdbd9327a 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1190,7 +1190,7 @@ EXPORT_SYMBOL(pcibios_align_resource);
  * Reparent resource children of pr that conflict with res
  * under res, and make res replace those children.
  */
-static int __init reparent_resources(struct resource *parent,
+static int reparent_resources(struct resource *parent,
 				     struct resource *res)
 {
 	struct resource *p, **pp;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ba949a2c93ac..ccf56ac92de5 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -97,7 +97,9 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
 	 * to do an appropriate TLB flush here too
 	 */
 	if (bus->self) {
+#ifdef CONFIG_PPC_STD_MMU_64
 		struct resource *res = bus->resource[0];
+#endif
 
 		pr_debug("IO unmapping for PCI-PCI bridge %s\n",
 			 pci_name(bus->self));
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index bbcbae183e92..87f1663584b0 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -116,20 +116,23 @@ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
 static inline u32 perf_get_misc_flags(struct pt_regs *regs)
 {
 	unsigned long mmcra = regs->dsisr;
+	unsigned long sihv = MMCRA_SIHV;
+	unsigned long sipr = MMCRA_SIPR;
 
 	if (TRAP(regs) != 0xf00)
 		return 0;	/* not a PMU interrupt */
 
 	if (ppmu->flags & PPMU_ALT_SIPR) {
-		if (mmcra & POWER6_MMCRA_SIHV)
-			return PERF_RECORD_MISC_HYPERVISOR;
-		return (mmcra & POWER6_MMCRA_SIPR) ?
-			PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL;
+		sihv = POWER6_MMCRA_SIHV;
+		sipr = POWER6_MMCRA_SIPR;
 	}
-	if (mmcra & MMCRA_SIHV)
+
+	/* PR has priority over HV, so order below is important */
+	if (mmcra & sipr)
+		return PERF_RECORD_MISC_USER;
+	if ((mmcra & sihv) && (freeze_events_kernel != MMCR0_FCHV))
 		return PERF_RECORD_MISC_HYPERVISOR;
-	return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER :
-		PERF_RECORD_MISC_KERNEL;
+	return PERF_RECORD_MISC_KERNEL;
 }
 
 /*
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 1168c5f440ab..c930ac38e59f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1016,9 +1016,13 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	int curr_frame = current->curr_ret_stack;
 	extern void return_to_handler(void);
-	unsigned long addr = (unsigned long)return_to_handler;
+	unsigned long rth = (unsigned long)return_to_handler;
+	unsigned long mrth = -1;
 #ifdef CONFIG_PPC64
-	addr = *(unsigned long*)addr;
+	extern void mod_return_to_handler(void);
+	rth = *(unsigned long *)rth;
+	mrth = (unsigned long)mod_return_to_handler;
+	mrth = *(unsigned long *)mrth;
 #endif
 #endif
 
@@ -1044,7 +1048,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		if (!firstframe || ip != lr) {
 			printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-			if (ip == addr && curr_frame >= 0) {
+			if ((ip == rth || ip == mrth) && curr_frame >= 0) {
 				printk(" (%pS)",
 				       (void *)current->ret_stack[curr_frame].ret);
 				curr_frame--;
@@ -1168,7 +1172,7 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 	unsigned long base = mm->brk;
 	unsigned long ret;
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
 	/*
 	 * If we are using 1TB segments and we are allowed to randomise
 	 * the heap, we can put it above 1TB so it is backed by a 1TB
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 797ea95aae2e..04f638d82fb3 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -57,7 +57,6 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/mmu-hash64.h>
 #include <asm/firmware.h>
 #include <asm/xmon.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 94e2df3cae07..137dc22afa42 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -50,6 +50,9 @@
 /* Max supported size for symbol names */
 #define MAX_SYMNAME	64
 
+/* The alignment of the vDSO */
+#define VDSO_ALIGNMENT	(1 << 16)
+
 extern char vdso32_start, vdso32_end;
 static void *vdso32_kbase = &vdso32_start;
 static unsigned int vdso32_pages;
@@ -231,15 +234,21 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	 * pick a base address for the vDSO in process space. We try to put it
 	 * at vdso_base which is the "natural" base for it, but we might fail
 	 * and end up putting it elsewhere.
+	 * Add enough to the size so that the result can be aligned.
 	 */
 	down_write(&mm->mmap_sem);
 	vdso_base = get_unmapped_area(NULL, vdso_base,
-				      vdso_pages << PAGE_SHIFT, 0, 0);
+				      (vdso_pages << PAGE_SHIFT) +
+				      ((VDSO_ALIGNMENT - 1) & PAGE_MASK),
+				      0, 0);
 	if (IS_ERR_VALUE(vdso_base)) {
 		rc = vdso_base;
 		goto fail_mmapsem;
 	}
 
+	/* Add required alignment. */
+	vdso_base = ALIGN(vdso_base, VDSO_ALIGNMENT);
+
 	/*
 	 * Put vDSO base into mm struct. We need to do this before calling
 	 * install_special_mapping or the perf counter mmap tracking code
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 904ef1360dd7..0546bcd49cd0 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -25,7 +25,7 @@ SECTIONS
 	. = ALIGN(16);
 	.text		: {
 		*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
-	}
+	}		      	      			:text
 	PROVIDE(__etext = .);
 	PROVIDE(_etext = .);
 	PROVIDE(etext = .);
@@ -56,7 +56,7 @@ SECTIONS
 	.fixup		: { *(.fixup) }
 
 	.dynamic	: { *(.dynamic) }		:text	:dynamic
-	.got		: { *(.got) }
+	.got		: { *(.got) }			:text
 	.plt		: { *(.plt) }
 
 	_end = .;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index f56429362a12..27735a7ac12b 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -236,6 +236,7 @@ SECTIONS
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 	}
 
+	. = ALIGN(PAGE_SIZE);
 	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
 		NOSAVE_DATA
 	}
diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c
index 47ee603f558e..2aa371e30079 100644
--- a/arch/powerpc/kvm/timing.c
+++ b/arch/powerpc/kvm/timing.c
@@ -201,7 +201,7 @@ static int kvmppc_exit_timing_open(struct inode *inode, struct file *file)
 	return single_open(file, kvmppc_exit_timing_show, inode->i_private);
 }
 
-static struct file_operations kvmppc_exit_timing_fops = {
+static const struct file_operations kvmppc_exit_timing_fops = {
 	.owner   = THIS_MODULE,
 	.open    = kvmppc_exit_timing_open,
 	.read    = seq_read,
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index bc44dc4b5c67..95ce35581696 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -72,19 +72,17 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
 1:
 #endif /* CONFIG_SPARSEMEM_VMEMMAP */
 
-	/* vmalloc/ioremap mapping encoding bits, the "li" instructions below
-	 * will be patched by the kernel at boot
+	/* vmalloc mapping gets the encoding from the PACA as the mapping
+	 * can be demoted from 64K -> 4K dynamically on some machines
 	 */
-BEGIN_FTR_SECTION
-	/* check whether this is in vmalloc or ioremap space */
 	clrldi	r11,r10,48
 	cmpldi	r11,(VMALLOC_SIZE >> 28) - 1
 	bgt	5f
 	lhz	r11,PACAVMALLOCSLLP(r13)
 	b	6f
 5:
-END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
-_GLOBAL(slb_miss_kernel_load_io)
+	/* IO mapping */
+	_GLOBAL(slb_miss_kernel_load_io)
 	li	r11,0
 6:
 BEGIN_FTR_SECTION
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index c31e5b534f0a..d45be5b5ad49 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -51,6 +51,8 @@ static void __init mpc5200_simple_setup_arch(void)
 /* list of the supported boards */
 static char *board[] __initdata = {
 	"intercontrol,digsy-mtc",
+	"manroland,mucmc52",
+	"manroland,uc101",
 	"phytec,pcm030",
 	"phytec,pcm032",
 	"promess,motionpro",
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index aca5741ddc67..a86c34b3bb84 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -365,7 +365,7 @@ static int axon_msi_probe(struct of_device *device,
 		printk(KERN_ERR
 		       "axon_msi: couldn't parse dcr properties on %s\n",
 			dn->full_name);
-		goto out;
+		goto out_free_msic;
 	}
 
 	msic->dcr_host = dcr_map(dn, dcr_base, dcr_len);
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 961309446170..884e8bcec499 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -147,7 +147,7 @@ static int __fops ## _open(struct inode *inode, struct file *file)	\
 	__simple_attr_check_format(__fmt, 0ull);			\
 	return spufs_attr_open(inode, file, __get, __set, __fmt);	\
 }									\
-static struct file_operations __fops = {				\
+static const struct file_operations __fops = {				\
 	.owner	 = THIS_MODULE,						\
 	.open	 = __fops ## _open,					\
 	.release = spufs_attr_release,					\
diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile
index cc7161ff1666..ce014928d460 100644
--- a/arch/powerpc/platforms/iseries/Makefile
+++ b/arch/powerpc/platforms/iseries/Makefile
@@ -1,18 +1,9 @@
 EXTRA_CFLAGS	+= -mno-minimal-toc
 
-extra-y += dt.o
-
 obj-y += exception.o
-obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \
+obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt.o mf.o lpevents.o \
 	hvcall.o proc.o htab.o iommu.o misc.o irq.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_VIOPATH) += viopath.o vio.o
 obj-$(CONFIG_MODULES) += ksyms.o
-
-quiet_cmd_dt_strings = DT_STR  $@
-      cmd_dt_strings = $(OBJCOPY) --rename-section .rodata.str1.8=.dt_strings \
-				$< $@
-
-$(obj)/dt_mod.o:	$(obj)/dt.o
-	$(call if_changed,dt_strings)
diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c
index c5a87a72057b..7f45a51fe793 100644
--- a/arch/powerpc/platforms/iseries/dt.c
+++ b/arch/powerpc/platforms/iseries/dt.c
@@ -51,11 +51,16 @@
 
 /*
  * These are created by the linker script at the start and end
- * of the section containing all the strings from this file.
+ * of the section containing all the strings marked with the DS macro.
  */
 extern char __dt_strings_start[];
 extern char __dt_strings_end[];
 
+#define DS(s)	({	\
+	static const char __s[] __attribute__((section(".dt_strings"))) = s; \
+	__s;		\
+})
+
 struct iseries_flat_dt {
 	struct boot_param_header header;
 	u64 reserve_map[2];
@@ -64,9 +69,8 @@ struct iseries_flat_dt {
 static void * __initdata dt_data;
 
 /*
- * Putting these strings here keeps them out of the section
- * that we rename to .dt_strings using objcopy and capture
- * for the strings blob of the flattened device tree.
+ * Putting these strings here keeps them out of the .dt_strings section
+ * that we capture for the strings blob of the flattened device tree.
  */
 static char __initdata device_type_cpu[] = "cpu";
 static char __initdata device_type_memory[] = "memory";
@@ -173,7 +177,7 @@ static void __init dt_start_node(struct iseries_flat_dt *dt, const char *name)
 
 #define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE)
 
-static void __init dt_prop(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop(struct iseries_flat_dt *dt, const char *name,
 		const void *data, int len)
 {
 	unsigned long offset;
@@ -191,44 +195,32 @@ static void __init dt_prop(struct iseries_flat_dt *dt, const char *name,
 	/* The actual data. */
 	dt_push_bytes(dt, data, len);
 }
+#define dt_prop(dt, name, data, len)	__dt_prop((dt), DS(name), (data), (len))
 
-static void __init dt_prop_str(struct iseries_flat_dt *dt, const char *name,
-		const char *data)
-{
-	dt_prop(dt, name, data, strlen(data) + 1); /* + 1 for NULL */
-}
+#define dt_prop_str(dt, name, data)	\
+	dt_prop((dt), name, (data), strlen((data)) + 1); /* + 1 for NULL */
 
-static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
 		u32 data)
 {
-	dt_prop(dt, name, &data, sizeof(u32));
+	__dt_prop(dt, name, &data, sizeof(u32));
 }
+#define dt_prop_u32(dt, name, data)	__dt_prop_u32((dt), DS(name), (data))
 
-static void __init __maybe_unused dt_prop_u64(struct iseries_flat_dt *dt,
-					      const char *name,
-		u64 data)
+static void __init __maybe_unused __dt_prop_u64(struct iseries_flat_dt *dt,
+		const char *name, u64 data)
 {
-	dt_prop(dt, name, &data, sizeof(u64));
+	__dt_prop(dt, name, &data, sizeof(u64));
 }
+#define dt_prop_u64(dt, name, data)	__dt_prop_u64((dt), DS(name), (data))
 
-static void __init dt_prop_u64_list(struct iseries_flat_dt *dt,
-		const char *name, u64 *data, int n)
-{
-	dt_prop(dt, name, data, sizeof(u64) * n);
-}
+#define dt_prop_u64_list(dt, name, data, n)	\
+	dt_prop((dt), name, (data), sizeof(u64) * (n))
 
-static void __init dt_prop_u32_list(struct iseries_flat_dt *dt,
-		const char *name, u32 *data, int n)
-{
-	dt_prop(dt, name, data, sizeof(u32) * n);
-}
+#define dt_prop_u32_list(dt, name, data, n)	\
+	dt_prop((dt), name, (data), sizeof(u32) * (n))
 
-#ifdef notyet
-static void __init dt_prop_empty(struct iseries_flat_dt *dt, const char *name)
-{
-	dt_prop(dt, name, NULL, 0);
-}
-#endif
+#define dt_prop_empty(dt, name)		dt_prop((dt), name, NULL, 0)
 
 static void __init dt_cpus(struct iseries_flat_dt *dt)
 {
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 21226b74c9b2..414ca9849f23 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -540,8 +540,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
 	/* Make sure IRQ is disabled */
 	kw_write_reg(reg_ier, 0);
 
-	/* Request chip interrupt */
-	if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
+	/* Request chip interrupt. We set IRQF_TIMER because we don't
+	 * want that interrupt disabled between the 2 passes of driver
+	 * suspend or we'll have issues running the pfuncs
+	 */
+	if (request_irq(host->irq, kw_i2c_irq, IRQF_TIMER, "keywest i2c", host))
 		host->irq = NO_IRQ;
 
 	printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index ab69925d579b..937a544a236d 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -209,7 +209,7 @@ static ssize_t dtl_file_read(struct file *filp, char __user *buf, size_t len,
 	return n_read * sizeof(struct dtl_entry);
 }
 
-static struct file_operations dtl_fops = {
+static const struct file_operations dtl_fops = {
 	.open		= dtl_file_open,
 	.release	= dtl_file_release,
 	.read		= dtl_file_read,
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 5a707da3f5c2..0a14d8cd314f 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -51,11 +51,10 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = {
 	{FW_FEATURE_VIO,		"hcall-vio"},
 	{FW_FEATURE_RDMA,		"hcall-rdma"},
 	{FW_FEATURE_LLAN,		"hcall-lLAN"},
-	{FW_FEATURE_BULK,		"hcall-bulk"},
+	{FW_FEATURE_BULK_REMOVE,	"hcall-bulk"},
 	{FW_FEATURE_XDABR,		"hcall-xdabr"},
 	{FW_FEATURE_MULTITCE,		"hcall-multi-tce"},
 	{FW_FEATURE_SPLPAR,		"hcall-splpar"},
-	{FW_FEATURE_BULK_REMOVE,	"hcall-bulk"},
 };
 
 /* Build up the firmware features bitmask using the contents of
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index c6f0a71b405e..bdbe96c8a7e4 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -517,6 +517,15 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 	in_xmon = 0;
 #endif
 
+#ifdef CONFIG_BOOKE
+	if (regs->msr & MSR_DE) {
+		bp = at_breakpoint(regs->nip);
+		if (bp != NULL) {
+			regs->nip = (unsigned long) &bp->instr[0];
+			atomic_inc(&bp->ref_count);
+		}
+	}
+#else
 	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) {
 		bp = at_breakpoint(regs->nip);
 		if (bp != NULL) {
@@ -530,7 +539,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 			}
 		}
 	}
-
+#endif
 	insert_cpu_bpts();
 
 	local_irq_restore(flags);
@@ -894,6 +903,14 @@ cmds(struct pt_regs *excp)
 	}
 }
 
+#ifdef CONFIG_BOOKE
+static int do_step(struct pt_regs *regs)
+{
+	regs->msr |= MSR_DE;
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+	return 1;
+}
+#else
 /*
  * Step a single instruction.
  * Some instructions we emulate, others we execute with MSR_SE set.
@@ -924,6 +941,7 @@ static int do_step(struct pt_regs *regs)
 	regs->msr |= MSR_SE;
 	return 1;
 }
+#endif
 
 static void bootcmds(void)
 {
diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c
index 704dd396257b..77df726180ba 100644
--- a/arch/s390/hypfs/hypfs_diag.c
+++ b/arch/s390/hypfs/hypfs_diag.c
@@ -438,7 +438,7 @@ static int diag204_probe(void)
 		}
 		if (diag204((unsigned long)SUBC_STIB6 |
 			    (unsigned long)INFO_EXT, pages, buf) >= 0) {
-			diag204_store_sc = SUBC_STIB7;
+			diag204_store_sc = SUBC_STIB6;
 			diag204_info_type = INFO_EXT;
 			goto out;
 		}
diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h
index a356c958e260..8a096b83f51f 100644
--- a/arch/s390/include/asm/delay.h
+++ b/arch/s390/include/asm/delay.h
@@ -14,10 +14,11 @@
 #ifndef _S390_DELAY_H
 #define _S390_DELAY_H
 
-extern void __udelay(unsigned long usecs);
-extern void udelay_simple(unsigned long usecs);
+extern void __udelay(unsigned long long usecs);
+extern void udelay_simple(unsigned long long usecs);
 extern void __delay(unsigned long loops);
 
-#define udelay(n) __udelay(n)
+#define udelay(n) __udelay((unsigned long long) (n))
+#define mdelay(n) __udelay((unsigned long long) (n) * 1000)
 
 #endif /* defined(_S390_DELAY_H) */
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 74d0bbb7d955..e885442c1dfe 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -92,6 +92,18 @@
 /* Keep this the last entry.  */
 #define R_390_NUM	61
 
+/* Bits present in AT_HWCAP. */
+#define HWCAP_S390_ESAN3	1
+#define HWCAP_S390_ZARCH	2
+#define HWCAP_S390_STFLE	4
+#define HWCAP_S390_MSA		8
+#define HWCAP_S390_LDISP	16
+#define HWCAP_S390_EIMM		32
+#define HWCAP_S390_DFP		64
+#define HWCAP_S390_HPAGE	128
+#define HWCAP_S390_ETF3EH	256
+#define HWCAP_S390_HIGH_GPRS	512
+
 /*
  * These are used to set parameters in the core dumps.
  */
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index 539263fc9ab9..95dcf183a28d 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -311,6 +311,10 @@ typedef struct
 	__u32		orig_gpr2;
 } s390_compat_regs;
 
+typedef struct
+{
+	__u32		gprs_high[NUM_GPRS];
+} s390_compat_regs_high;
 
 #ifdef __KERNEL__
 
diff --git a/arch/s390/include/asm/ucontext.h b/arch/s390/include/asm/ucontext.h
index d69bec0b03f5..cfb874e66c9a 100644
--- a/arch/s390/include/asm/ucontext.h
+++ b/arch/s390/include/asm/ucontext.h
@@ -9,6 +9,21 @@
 #ifndef _ASM_S390_UCONTEXT_H
 #define _ASM_S390_UCONTEXT_H
 
+#define UC_EXTENDED	0x00000001
+
+#ifndef __s390x__
+
+struct ucontext_extended {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	_sigregs	  uc_mcontext;
+	unsigned long	  uc_sigmask[2];
+	unsigned long	  uc_gprs_high[16];
+};
+
+#endif
+
 struct ucontext {
 	unsigned long	  uc_flags;
 	struct ucontext  *uc_link;
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index b537cb0e9b55..eee999853a7c 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -39,6 +39,7 @@ typedef struct
 	struct sigcontext32 sc;
 	_sigregs32 sregs;
 	int signo;
+	__u32 gprs_high[NUM_GPRS];
 	__u8 retcode[S390_SYSCALL_SIZE];
 } sigframe32;
 
@@ -48,6 +49,7 @@ typedef struct
 	__u8 retcode[S390_SYSCALL_SIZE];
 	compat_siginfo_t info;
 	struct ucontext32 uc;
+	__u32 gprs_high[NUM_GPRS];
 } rt_sigframe32;
 
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
@@ -344,6 +346,30 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
 	return 0;
 }
 
+static int save_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
+{
+	__u32 gprs_high[NUM_GPRS];
+	int i;
+
+	for (i = 0; i < NUM_GPRS; i++)
+		gprs_high[i] = regs->gprs[i] >> 32;
+
+	return __copy_to_user(uregs, &gprs_high, sizeof(gprs_high));
+}
+
+static int restore_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
+{
+	__u32 gprs_high[NUM_GPRS];
+	int err, i;
+
+	err = __copy_from_user(&gprs_high, uregs, sizeof(gprs_high));
+	if (err)
+		return err;
+	for (i = 0; i < NUM_GPRS; i++)
+		*(__u32 *)&regs->gprs[i] = gprs_high[i];
+	return 0;
+}
+
 asmlinkage long sys32_sigreturn(void)
 {
 	struct pt_regs *regs = task_pt_regs(current);
@@ -363,6 +389,8 @@ asmlinkage long sys32_sigreturn(void)
 
 	if (restore_sigregs32(regs, &frame->sregs))
 		goto badframe;
+	if (restore_sigregs_gprs_high(regs, frame->gprs_high))
+		goto badframe;
 
 	return regs->gprs[2];
 
@@ -394,6 +422,8 @@ asmlinkage long sys32_rt_sigreturn(void)
 
 	if (restore_sigregs32(regs, &frame->uc.uc_mcontext))
 		goto badframe;
+	if (restore_sigregs_gprs_high(regs, frame->gprs_high))
+		goto badframe;
 
 	err = __get_user(ss_sp, &frame->uc.uc_stack.ss_sp);
 	st.ss_sp = compat_ptr(ss_sp);
@@ -474,6 +504,8 @@ static int setup_frame32(int sig, struct k_sigaction *ka,
 
 	if (save_sigregs32(regs, &frame->sregs))
 		goto give_sigsegv;
+	if (save_sigregs_gprs_high(regs, frame->gprs_high))
+		goto give_sigsegv;
 	if (__put_user((unsigned long) &frame->sregs, &frame->sc.sregs))
 		goto give_sigsegv;
 
@@ -529,13 +561,14 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
 		goto give_sigsegv;
 
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(UC_EXTENDED, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->gprs[15]),
 	                  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
 	err |= save_sigregs32(regs, &frame->uc.uc_mcontext);
+	err |= save_sigregs_gprs_high(regs, frame->gprs_high);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
 		goto give_sigsegv;
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 682fb69dba21..cbd9901dc0f8 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -409,7 +409,7 @@ sys32_munmap_wrapper:
 	.globl	sys32_truncate_wrapper
 sys32_truncate_wrapper:
 	llgtr	%r2,%r2			# const char *
-	llgfr	%r3,%r3			# unsigned long
+	lgfr	%r3,%r3			# long
 	jg	sys_truncate		# branch to system call
 
 	.globl	sys32_ftruncate_wrapper
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 57bdcb1e3cdf..f5fe34dd821b 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -185,9 +185,6 @@ unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent)
 {
 	struct ftrace_graph_ent trace;
 
-	/* Nmi's are currently unsupported. */
-	if (unlikely(in_nmi()))
-		goto out;
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
 	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index ab2e3ed28abc..639380a0c45c 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -55,6 +55,8 @@ void *module_alloc(unsigned long size)
 /* Free memory returned from module_alloc */
 void module_free(struct module *mod, void *module_region)
 {
+	vfree(mod->arch.syminfo);
+	mod->arch.syminfo = NULL;
 	vfree(module_region);
 }
 
@@ -402,6 +404,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    struct module *me)
 {
 	vfree(me->arch.syminfo);
+	me->arch.syminfo = NULL;
 	return module_bug_finalize(hdr, sechdrs, me);
 }
 
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 802c8ab247f3..0729f36c2fe3 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -31,9 +31,9 @@ void __cpuinit print_cpu_info(void)
 
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
-	static const char *hwcap_str[9] = {
+	static const char *hwcap_str[10] = {
 		"esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp",
-		"edat", "etf3eh"
+		"edat", "etf3eh", "highgprs"
 	};
 	struct _lowcore *lc;
 	unsigned long n = (unsigned long) v - 1;
@@ -48,7 +48,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			   num_online_cpus(), loops_per_jiffy/(500000/HZ),
 			   (loops_per_jiffy/(5000/HZ))%100);
 		seq_puts(m, "features\t: ");
-		for (i = 0; i < 9; i++)
+		for (i = 0; i < 10; i++)
 			if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
 				seq_printf(m, "%s ", hwcap_str[i]);
 		seq_puts(m, "\n");
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index a8738676b26c..653c6a178740 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -57,6 +57,7 @@
 enum s390_regset {
 	REGSET_GENERAL,
 	REGSET_FP,
+	REGSET_GENERAL_EXTENDED,
 };
 
 static void
@@ -879,6 +880,67 @@ static int s390_compat_regs_set(struct task_struct *target,
 	return rc;
 }
 
+static int s390_compat_regs_high_get(struct task_struct *target,
+				     const struct user_regset *regset,
+				     unsigned int pos, unsigned int count,
+				     void *kbuf, void __user *ubuf)
+{
+	compat_ulong_t *gprs_high;
+
+	gprs_high = (compat_ulong_t *)
+		&task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)];
+	if (kbuf) {
+		compat_ulong_t *k = kbuf;
+		while (count > 0) {
+			*k++ = *gprs_high;
+			gprs_high += 2;
+			count -= sizeof(*k);
+		}
+	} else {
+		compat_ulong_t __user *u = ubuf;
+		while (count > 0) {
+			if (__put_user(*gprs_high, u++))
+				return -EFAULT;
+			gprs_high += 2;
+			count -= sizeof(*u);
+		}
+	}
+	return 0;
+}
+
+static int s390_compat_regs_high_set(struct task_struct *target,
+				     const struct user_regset *regset,
+				     unsigned int pos, unsigned int count,
+				     const void *kbuf, const void __user *ubuf)
+{
+	compat_ulong_t *gprs_high;
+	int rc = 0;
+
+	gprs_high = (compat_ulong_t *)
+		&task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)];
+	if (kbuf) {
+		const compat_ulong_t *k = kbuf;
+		while (count > 0) {
+			*gprs_high = *k++;
+			*gprs_high += 2;
+			count -= sizeof(*k);
+		}
+	} else {
+		const compat_ulong_t  __user *u = ubuf;
+		while (count > 0 && !rc) {
+			unsigned long word;
+			rc = __get_user(word, u++);
+			if (rc)
+				break;
+			*gprs_high = word;
+			*gprs_high += 2;
+			count -= sizeof(*u);
+		}
+	}
+
+	return rc;
+}
+
 static const struct user_regset s390_compat_regsets[] = {
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
@@ -896,6 +958,14 @@ static const struct user_regset s390_compat_regsets[] = {
 		.get = s390_fpregs_get,
 		.set = s390_fpregs_set,
 	},
+	[REGSET_GENERAL_EXTENDED] = {
+		.core_note_type = NT_PRXSTATUS,
+		.n = sizeof(s390_compat_regs_high) / sizeof(compat_long_t),
+		.size = sizeof(compat_long_t),
+		.align = sizeof(compat_long_t),
+		.get = s390_compat_regs_high_get,
+		.set = s390_compat_regs_high_set,
+	},
 };
 
 static const struct user_regset_view user_s390_compat_view = {
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 9ed13a1ed376..061479ff029f 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -729,7 +729,7 @@ static void __init setup_hwcaps(void)
 
 	if ((facility_list & (1UL << (31 - 22)))
 	    && (facility_list & (1UL << (31 - 30))))
-		elf_hwcap |= 1UL << 8;
+		elf_hwcap |= HWCAP_S390_ETF3EH;
 
 	/*
 	 * Check for additional facilities with store-facility-list-extended.
@@ -748,11 +748,20 @@ static void __init setup_hwcaps(void)
 	    __stfle(&facility_list_extended, 1) > 0) {
 		if ((facility_list_extended & (1ULL << (63 - 42)))
 		    && (facility_list_extended & (1ULL << (63 - 44))))
-			elf_hwcap |= 1UL << 6;
+			elf_hwcap |= HWCAP_S390_DFP;
 	}
 
+	/*
+	 * Huge page support HWCAP_S390_HPAGE is bit 7.
+	 */
 	if (MACHINE_HAS_HPAGE)
-		elf_hwcap |= 1UL << 7;
+		elf_hwcap |= HWCAP_S390_HPAGE;
+
+	/*
+	 * 64-bit register support for 31-bit processes
+	 * HWCAP_S390_HIGH_GPRS is bit 9.
+	 */
+	elf_hwcap |= HWCAP_S390_HIGH_GPRS;
 
 	switch (S390_lowcore.cpu_id.machine) {
 	case 0x9672:
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index fe927d0bc20b..7c8653e27db6 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -43,7 +43,7 @@ swsusp_arch_suspend:
 	lghi	%r1,0x1000
 
 	/* Save CPU address */
-	stap	__LC_CPU_ADDRESS(%r1)
+	stap	__LC_CPU_ADDRESS(%r0)
 
 	/* Store registers */
 	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
@@ -69,8 +69,21 @@ swsusp_arch_suspend:
 	stmg	%r0,%r15,0x280(%r1)		/* store general registers */
 
 	stpt	0x328(%r1)			/* store timer */
+	stck	__SF_EMPTY(%r15)		/* store clock */
 	stckc	0x330(%r1)			/* store clock comparator */
 
+	/* Update cputime accounting before going to sleep */
+	lg	%r0,__LC_LAST_UPDATE_TIMER
+	slg	%r0,0x328(%r1)
+	alg	%r0,__LC_SYSTEM_TIMER
+	stg	%r0,__LC_SYSTEM_TIMER
+	mvc	__LC_LAST_UPDATE_TIMER(8),0x328(%r1)
+	lg	%r0,__LC_LAST_UPDATE_CLOCK
+	slg	%r0,__SF_EMPTY(%r15)
+	alg	%r0,__LC_STEAL_TIMER
+	stg	%r0,__LC_STEAL_TIMER
+	mvc	__LC_LAST_UPDATE_CLOCK(8),__SF_EMPTY(%r15)
+
 	/* Activate DAT */
 	stosm	__SF_EMPTY(%r15),0x04
 
@@ -159,8 +172,7 @@ pgm_check_entry:
 	larl	%r1,.Lresume_cpu		/* Resume CPU address: r2 */
 	stap	0(%r1)
 	llgh	%r2,0(%r1)
-	lghi	%r3,0x1000
-	llgh	%r1,__LC_CPU_ADDRESS(%r3)	/* Suspend CPU address: r1 */
+	llgh	%r1,__LC_CPU_ADDRESS(%r0)	/* Suspend CPU address: r1 */
 	cgr	%r1,%r2
 	je	restore_registers		/* r1 = r2 -> nothing to do */
 	larl	%r4,.Lrestart_suspend_psw	/* Set new restart PSW */
@@ -200,8 +212,11 @@ restart_suspend:
 
 restore_registers:
 	/* Restore registers */
-	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
+	lghi	%r13,0x1000		/* %r1 = pointer to save area */
 
+	/* Ignore time spent in suspended state. */
+	llgf	%r1,0x318(%r13)
+	stck	__LC_LAST_UPDATE_CLOCK(%r1)
 	spt	0x328(%r13)		/* reprogram timer */
 	//sckc	0x330(%r13)		/* set clock comparator */
 
@@ -229,9 +244,6 @@ restore_registers:
 	/* Load old stack */
 	lg	%r15,0x2f8(%r13)
 
-	/* Pointer to save area */
-	lghi	%r13,0x1000
-
 	/* Restore prefix register */
 	spx	0x318(%r13)
 
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 45a3e9a7ae21..adfb32aa6d59 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -247,6 +247,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	}
 
 	/*
+	 * Put vDSO base into mm struct. We need to do this before calling
+	 * install_special_mapping or the perf counter mmap tracking code
+	 * will fail to recognise it as a vDSO (since arch_vma_name fails).
+	 */
+	current->mm->context.vdso_base = vdso_base;
+
+	/*
 	 * our vma flags don't have VM_WRITE so by default, the process
 	 * isn't allowed to write those pages.
 	 * gdb can break that with ptrace interface, and thus trigger COW
@@ -267,14 +274,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 				     VM_ALWAYSDUMP,
 				     vdso_pagelist);
 	if (rc)
-		goto out_up;
-
-	/* Put vDSO base into mm struct */
-	current->mm->context.vdso_base = vdso_base;
-
-	up_write(&mm->mmap_sem);
-	return 0;
-
+		current->mm->context.vdso_base = 0;
 out_up:
 	up_write(&mm->mmap_sem);
 	return rc;
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index bc15ef93e656..a68ac10213b2 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -51,6 +51,7 @@ SECTIONS
 
 	. = ALIGN(PAGE_SIZE);
 	_eshared = .;		/* End of shareable data */
+	_sdata = .;		/* Start of data section */
 
 	EXCEPTION_TABLE(16) :data
 
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index ec5eee7c25d8..06cce8285ba0 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -58,7 +58,7 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code);
 int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action);
 
-static inline int kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
+static inline long kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.sie_block->gmslm
 		- vcpu->arch.sie_block->gmsor
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 97c1eca83cc2..752b362bf651 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -25,13 +25,13 @@ void __delay(unsigned long loops)
 	asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1));
 }
 
-static void __udelay_disabled(unsigned long usecs)
+static void __udelay_disabled(unsigned long long usecs)
 {
 	unsigned long mask, cr0, cr0_saved;
 	u64 clock_saved;
 
 	clock_saved = local_tick_disable();
-	set_clock_comparator(get_clock() + ((u64) usecs << 12));
+	set_clock_comparator(get_clock() + (usecs << 12));
 	__ctl_store(cr0_saved, 0, 0);
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
@@ -46,20 +46,25 @@ static void __udelay_disabled(unsigned long usecs)
 	set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
-static void __udelay_enabled(unsigned long usecs)
+static void __udelay_enabled(unsigned long long usecs)
 {
 	unsigned long mask;
-	u64 end, time;
+	u64 clock_saved;
+	u64 end;
 
 	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO;
-	end = get_clock() + ((u64) usecs << 12);
+	end = get_clock() + (usecs << 12);
 	do {
-		time = end < S390_lowcore.clock_comparator ?
-			end : S390_lowcore.clock_comparator;
-		set_clock_comparator(time);
+		clock_saved = 0;
+		if (end < S390_lowcore.clock_comparator) {
+			clock_saved = local_tick_disable();
+			set_clock_comparator(end);
+		}
 		trace_hardirqs_on();
 		__load_psw_mask(mask);
 		local_irq_disable();
+		if (clock_saved)
+			local_tick_enable(clock_saved);
 	} while (get_clock() < end);
 	set_clock_comparator(S390_lowcore.clock_comparator);
 }
@@ -67,7 +72,7 @@ static void __udelay_enabled(unsigned long usecs)
 /*
  * Waits for 'usecs' microseconds using the TOD clock comparator.
  */
-void __udelay(unsigned long usecs)
+void __udelay(unsigned long long usecs)
 {
 	unsigned long flags;
 
@@ -101,11 +106,11 @@ EXPORT_SYMBOL(__udelay);
  * Simple udelay variant. To be used on startup and reboot
  * when the interrupt handler isn't working.
  */
-void udelay_simple(unsigned long usecs)
+void udelay_simple(unsigned long long usecs)
 {
 	u64 end;
 
-	end = get_clock() + ((u64) usecs << 12);
+	end = get_clock() + (usecs << 12);
 	while (get_clock() < end)
 		cpu_relax();
 }
diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c
index 3f15aaf54855..58da3f461214 100644
--- a/arch/s390/lib/uaccess_mvcos.c
+++ b/arch/s390/lib/uaccess_mvcos.c
@@ -36,7 +36,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
 	tmp1 = -4096UL;
 	asm volatile(
 		"0: .insn ss,0xc80000000000,0(%0,%2),0(%1),0\n"
-		"   jz    7f\n"
+		"9: jz    7f\n"
 		"1:"ALR"  %0,%3\n"
 		"  "SLR"  %1,%3\n"
 		"  "SLR"  %2,%3\n"
@@ -47,7 +47,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
 		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
 		"   jnh   4f\n"
 		"3: .insn ss,0xc80000000000,0(%4,%2),0(%1),0\n"
-		"  "SLR"  %0,%4\n"
+		"10:"SLR"  %0,%4\n"
 		"  "ALR"  %2,%4\n"
 		"4:"LHI"  %4,-1\n"
 		"  "ALR"  %4,%0\n"	/* copy remaining size, subtract 1 */
@@ -61,7 +61,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
 		"   j     8f\n"
 		"7:"SLR"  %0,%0\n"
 		"8: \n"
-		EX_TABLE(0b,2b) EX_TABLE(3b,4b)
+		EX_TABLE(0b,2b) EX_TABLE(3b,4b) EX_TABLE(9b,2b) EX_TABLE(10b,4b)
 		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
 		: "d" (reg0) : "cc", "memory");
 	return size;
@@ -82,7 +82,7 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
 	tmp1 = -4096UL;
 	asm volatile(
 		"0: .insn ss,0xc80000000000,0(%0,%1),0(%2),0\n"
-		"   jz    4f\n"
+		"6: jz    4f\n"
 		"1:"ALR"  %0,%3\n"
 		"  "SLR"  %1,%3\n"
 		"  "SLR"  %2,%3\n"
@@ -93,11 +93,11 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
 		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
 		"   jnh   5f\n"
 		"3: .insn ss,0xc80000000000,0(%4,%1),0(%2),0\n"
-		"  "SLR"  %0,%4\n"
+		"7:"SLR"  %0,%4\n"
 		"   j     5f\n"
 		"4:"SLR"  %0,%0\n"
 		"5: \n"
-		EX_TABLE(0b,2b) EX_TABLE(3b,5b)
+		EX_TABLE(0b,2b) EX_TABLE(3b,5b) EX_TABLE(6b,2b) EX_TABLE(7b,5b)
 		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
 		: "d" (reg0) : "cc", "memory");
 	return size;
diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c
index d2ffbadb51a7..07deaeee14c8 100644
--- a/arch/s390/lib/uaccess_std.c
+++ b/arch/s390/lib/uaccess_std.c
@@ -36,12 +36,12 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
 	tmp1 = -256UL;
 	asm volatile(
 		"0: mvcp  0(%0,%2),0(%1),%3\n"
-		"   jz    8f\n"
+		"10:jz    8f\n"
 		"1:"ALR"  %0,%3\n"
 		"   la    %1,256(%1)\n"
 		"   la    %2,256(%2)\n"
 		"2: mvcp  0(%0,%2),0(%1),%3\n"
-		"   jnz   1b\n"
+		"11:jnz   1b\n"
 		"   j     8f\n"
 		"3: la    %4,255(%1)\n"	/* %4 = ptr + 255 */
 		"  "LHI"  %3,-4096\n"
@@ -50,7 +50,7 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
 		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
 		"   jnh   5f\n"
 		"4: mvcp  0(%4,%2),0(%1),%3\n"
-		"  "SLR"  %0,%4\n"
+		"12:"SLR"  %0,%4\n"
 		"  "ALR"  %2,%4\n"
 		"5:"LHI"  %4,-1\n"
 		"  "ALR"  %4,%0\n"	/* copy remaining size, subtract 1 */
@@ -65,6 +65,7 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
 		"8:"SLR"  %0,%0\n"
 		"9: \n"
 		EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b)
+		EX_TABLE(10b,3b) EX_TABLE(11b,3b) EX_TABLE(12b,5b)
 		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
 		: : "cc", "memory");
 	return size;
@@ -85,12 +86,12 @@ size_t copy_to_user_std(size_t size, void __user *ptr, const void *x)
 	tmp1 = -256UL;
 	asm volatile(
 		"0: mvcs  0(%0,%1),0(%2),%3\n"
-		"   jz    5f\n"
+		"7: jz    5f\n"
 		"1:"ALR"  %0,%3\n"
 		"   la    %1,256(%1)\n"
 		"   la    %2,256(%2)\n"
 		"2: mvcs  0(%0,%1),0(%2),%3\n"
-		"   jnz   1b\n"
+		"8: jnz   1b\n"
 		"   j     5f\n"
 		"3: la    %4,255(%1)\n" /* %4 = ptr + 255 */
 		"  "LHI"  %3,-4096\n"
@@ -99,11 +100,12 @@ size_t copy_to_user_std(size_t size, void __user *ptr, const void *x)
 		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
 		"   jnh   6f\n"
 		"4: mvcs  0(%4,%1),0(%2),%3\n"
-		"  "SLR"  %0,%4\n"
+		"9:"SLR"  %0,%4\n"
 		"   j     6f\n"
 		"5:"SLR"  %0,%0\n"
 		"6: \n"
 		EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b)
+		EX_TABLE(7b,3b) EX_TABLE(8b,3b) EX_TABLE(9b,6b)
 		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
 		: : "cc", "memory");
 	return size;
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index c60bfb309ce6..2757c5616a07 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -279,7 +279,10 @@ int s390_enable_sie(void)
 	/* lets check if we are allowed to replace the mm */
 	task_lock(tsk);
 	if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
-	    tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) {
+#ifdef CONFIG_AIO
+	    !hlist_empty(&tsk->mm->ioctx_list) ||
+#endif
+	    tsk->mm != tsk->active_mm) {
 		task_unlock(tsk);
 		return -EINVAL;
 	}
@@ -295,7 +298,10 @@ int s390_enable_sie(void)
 	/* Now lets check again if something happened */
 	task_lock(tsk);
 	if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
-	    tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) {
+#ifdef CONFIG_AIO
+	    !hlist_empty(&tsk->mm->ioctx_list) ||
+#endif
+	    tsk->mm != tsk->active_mm) {
 		mmput(mm);
 		task_unlock(tsk);
 		return -EINVAL;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b940424f8ccc..88cdeb9f72d9 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -37,7 +37,6 @@ config SUPERH32
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	select HAVE_FTRACE_SYSCALLS
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_ARCH_KGDB
 	select ARCH_HIBERNATION_POSSIBLE if MMU
@@ -122,6 +121,9 @@ config SYS_SUPPORTS_APM_EMULATION
 	bool
 	select ARCH_SUSPEND_POSSIBLE
 
+config SYS_SUPPORTS_HUGETLBFS
+	bool
+
 config SYS_SUPPORTS_SMP
 	bool
 
@@ -196,6 +198,7 @@ config CPU_SH4
 	select CPU_HAS_SR_RB
 	select CPU_HAS_FPU if !CPU_SH4AL_DSP
 	select SYS_SUPPORTS_TMU
+	select SYS_SUPPORTS_HUGETLBFS if MMU
 
 config CPU_SH4A
 	bool
@@ -210,6 +213,7 @@ config CPU_SH5
 	bool
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_TMU
+	select SYS_SUPPORTS_HUGETLBFS if MMU
 
 config CPU_SHX2
 	bool
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fc51a918b31a..66e40aabc600 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -199,7 +199,7 @@ endif
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \
 	       zImage vmlinux.srec romImage
 PHONY += maketools $(BOOT_TARGETS) FORCE
 
@@ -225,6 +225,7 @@ define archhelp
 	@echo '  vmlinux.srec	           - Create an ELF S-record'
 	@echo '* uImage  	           - Alias to bootable U-Boot image'
 	@echo '  uImage.srec	           - Create an S-record for U-Boot'
+	@echo '  uImage.bin	           - Kernel-only image for U-Boot (bin)'
 	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
 	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
 	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 0a37c8bfc959..99ffc5f1c0dd 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -205,8 +205,6 @@ static void __init setup_port_multiplexing(void)
 
 static void __init mpr2_setup(char **cmdline_p)
 {
-	__set_io_port_base(0xa0000000);
-
 	/* set Pin Select Register A:
 	 * /PCC_CD1, /PCC_CD2,  PCC_BVD1, PCC_BVD2,
 	 * /IOIS16,  IRQ4,	IRQ5,	  USB1d_SUSPEND
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index ebe99227d4e6..a4b7402d6176 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -42,8 +42,6 @@ static void __init dreamcast_setup(char **cmdline_p)
 	/* Acknowledge any previous events */
 	/* XXX */
 
-	__set_io_port_base(0xa0000000);
-
 	/* Assign all virtual IRQs to the System ASIC int. handler */
 	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
 		set_irq_chip_and_handler(i, &systemasic_int,
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 5f9881e16e2f..3b1ceb46fa54 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
 #include <linux/input.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -38,6 +39,20 @@
  *  0x1800_0000  MFI              16bit
  */
 
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect  ON     : write protect
+ *                                  OFF    : No write protect
+ * DS2[2] = RMII / TS, SCIF         ON     : RMII
+ *                                  OFF    : TS, SCIF3
+ * DS2[3] = Camera / Video          ON     : Camera
+ *                                  OFF    : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
+ *                                  OFF    : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD              ON-OFF : SD
+ *                                  OFF-ON : MMC
+ */
+
 /* Heartbeat */
 static unsigned char led_pos[] = { 0, 1, 2, 3 };
 static struct heartbeat_data heartbeat_data = {
@@ -70,7 +85,7 @@ static struct mtd_partition nor_flash_partitions[] = {
 		.name = "boot loader",
 		.offset = 0,
 		.size = (5 * 1024 * 1024),
-		.mask_flags = MTD_CAP_ROM,
+		.mask_flags = MTD_WRITEABLE,  /* force read-only */
 	}, {
 		.name = "free-area",
 		.offset = MTDPART_OFS_APPEND,
@@ -376,6 +391,43 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* TouchScreen */
+#define IRQ0 32
+static int ts_get_pendown_state(void)
+{
+	int val = 0;
+	gpio_free(GPIO_FN_INTC_IRQ0);
+	gpio_request(GPIO_PTZ0, NULL);
+	gpio_direction_input(GPIO_PTZ0);
+
+	val = gpio_get_value(GPIO_PTZ0);
+
+	gpio_free(GPIO_PTZ0);
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+	return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	return 0;
+}
+
+struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+	I2C_BOARD_INFO("tsc2007", 0x48),
+	.type		= "tsc2007",
+	.platform_data	= &tsc2007_info,
+	.irq		= IRQ0,
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -460,6 +512,11 @@ static void __init sh_eth_init(void)
 #define IODRIVEA  0xA405018A
 static int __init arch_setup(void)
 {
+	/* enable STATUS0, STATUS2 and PDSTATUS */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+	gpio_request(GPIO_FN_STATUS2, NULL);
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
 	/* enable SCIFA0 */
 	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
 	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
@@ -590,6 +647,10 @@ static int __init arch_setup(void)
 		 */
 		gpio_request(GPIO_PTF4, NULL);
 		gpio_direction_output(GPIO_PTF4, 1);
+
+		/* enable TouchScreen */
+		i2c_register_board_info(0, &ts_i2c_clients, 1);
+		set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
 	}
 
 	/* enable CEU0 */
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 25cdf7358000..528013188196 100644
--- a/arch/sh/boards/mach-landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -14,7 +14,6 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/kdev_t.h>
 #include <linux/cdev.h>
 #include <linux/fs.h>
@@ -35,7 +34,7 @@ static int gio_open(struct inode *inode, struct file *filp)
 	int minor;
 	int ret = -ENOENT;
 
-	lock_kernel();
+	preempt_disable();
 	minor = MINOR(inode->i_rdev);
 	if (minor < DEVCOUNT) {
 		if (openCnt > 0) {
@@ -45,7 +44,7 @@ static int gio_open(struct inode *inode, struct file *filp)
 			ret = 0;
 		}
 	}
-	unlock_kernel();
+	preempt_enable();
 	return ret;
 }
 
@@ -60,8 +59,7 @@ static int gio_close(struct inode *inode, struct file *filp)
 	return 0;
 }
 
-static int gio_ioctl(struct inode *inode, struct file *filp,
-			     unsigned int cmd, unsigned long arg)
+static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	unsigned int data;
 	static unsigned int addr = 0;
@@ -129,7 +127,7 @@ static const struct file_operations gio_fops = {
 	.owner = THIS_MODULE,
 	.open = gio_open,	/* open */
 	.release = gio_close,	/* release */
-	.ioctl = gio_ioctl,	/* ioctl */
+	.unlocked_ioctl = gio_ioctl,
 };
 
 static int __init gio_init(void)
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 4af3a771c058..c37617e63220 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -11,10 +11,6 @@
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
index af64d030a5c7..a5c0df785bfe 100644
--- a/arch/sh/boards/mach-rsk/setup.c
+++ b/arch/sh/boards/mach-rsk/setup.c
@@ -15,14 +15,12 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#ifdef CONFIG_MTD
 #include <linux/mtd/map.h>
+#endif
 #include <asm/machvec.h>
 #include <asm/io.h>
 
-static const char *probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition *parsed_partitions;
-
 static struct mtd_partition rsk_partitions[] = {
 	{
 		.name		= "Bootloader",
@@ -41,6 +39,8 @@ static struct mtd_partition rsk_partitions[] = {
 };
 
 static struct physmap_flash_data flash_data = {
+	.parts		= rsk_partitions,
+	.nr_parts	= ARRAY_SIZE(rsk_partitions),
 	.width		= 2,
 };
 
@@ -60,7 +60,8 @@ static struct platform_device flash_device = {
 	},
 };
 
-static struct mtd_info *flash_mtd;
+#ifdef CONFIG_MTD
+static const char *probes[] = { "cmdlinepart", NULL };
 
 static struct map_info rsk_flash_map = {
 	.name		= "RSK+ Flash",
@@ -68,6 +69,10 @@ static struct map_info rsk_flash_map = {
 	.bankwidth	= 2,
 };
 
+static struct mtd_info *flash_mtd;
+
+static struct mtd_partition *parsed_partitions;
+
 static void __init set_mtd_partitions(void)
 {
 	int nr_parts = 0;
@@ -77,14 +82,14 @@ static void __init set_mtd_partitions(void)
 	nr_parts = parse_mtd_partitions(flash_mtd, probes,
 					&parsed_partitions, 0);
 	/* If there is no partition table, used the hard coded table */
-	if (nr_parts <= 0) {
-		flash_data.parts = rsk_partitions;
-		flash_data.nr_parts = ARRAY_SIZE(rsk_partitions);
-	} else {
+	if (nr_parts > 0) {
 		flash_data.nr_parts = nr_parts;
 		flash_data.parts = parsed_partitions;
 	}
 }
+#else
+static inline void set_mtd_partitions(void) {}
+#endif
 
 static struct platform_device *rsk_devices[] __initdata = {
 	&flash_device,
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index a1316872be6f..cb8cf5572e79 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -20,11 +20,12 @@ CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
 CONFIG_ENTRY_OFFSET	?= 0x00001000
 
+suffix-y := bin
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
 
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma uImage.bin
 extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 subdir- := compressed romimage
 
@@ -88,6 +89,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+	$(call if_changed,uimage,none)
+
 OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
 $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
 	$(call if_changed,objcopy)
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 0151933e5253..bb407ef0b91e 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -152,8 +152,6 @@ call_do_page_fault:
 	mov.l	1f, r0
 	mov.l	@r0, r6
 
-	sti
-
 	mov.l	3f, r0
 	mov.l	4f, r1
 	mov	r15, r4
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 03b3616c80a5..2d07084e4882 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -20,6 +20,7 @@
 #include <linux/list.h>
 #include <linux/mempool.h>
 #include <linux/mm.h>
+#include <linux/ftrace.h>
 #include <asm/dwarf.h>
 #include <asm/unwinder.h>
 #include <asm/sections.h>
@@ -557,6 +558,27 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 	if (!pc && !prev)
 		pc = (unsigned long)current_text_addr();
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/*
+	 * If our stack has been patched by the function graph tracer
+	 * then we might see the address of return_to_handler() where we
+	 * expected to find the real return address.
+	 */
+	if (pc == (unsigned long)&return_to_handler) {
+		int index = current->curr_ret_stack;
+
+		/*
+		 * We currently have no way of tracking how many
+		 * return_to_handler()'s we've seen. If there is more
+		 * than one patched return address on our stack,
+		 * complain loudly.
+		 */
+		WARN_ON(index > 0);
+
+		pc = current->ret_stack[index].ret;
+	}
+#endif
+
 	frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
 	if (!frame) {
 		printk(KERN_ERR "Unable to allocate a dwarf frame\n");
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 68d9223b145e..3eb84931d2aa 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -121,7 +121,7 @@ noresched:
 ENTRY(resume_userspace)
 	! r8: current_thread_info
 	cli
-	TRACE_IRQS_OfF
+	TRACE_IRQS_OFF
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
 	tst	#(_TIF_WORK_MASK & 0xff), r0
 	bt/s	__restore_all
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index a3dcc6d5d253..2c48e267256e 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -291,31 +291,48 @@ struct syscall_metadata *syscall_nr_to_meta(int nr)
 	return syscalls_metadata[nr];
 }
 
-void arch_init_ftrace_syscalls(void)
+int syscall_name_to_nr(char *name)
+{
+	int i;
+
+	if (!syscalls_metadata)
+		return -1;
+	for (i = 0; i < NR_syscalls; i++)
+		if (syscalls_metadata[i])
+			if (!strcmp(syscalls_metadata[i]->name, name))
+				return i;
+	return -1;
+}
+
+void set_syscall_enter_id(int num, int id)
+{
+	syscalls_metadata[num]->enter_id = id;
+}
+
+void set_syscall_exit_id(int num, int id)
+{
+	syscalls_metadata[num]->exit_id = id;
+}
+
+static int __init arch_init_ftrace_syscalls(void)
 {
 	int i;
 	struct syscall_metadata *meta;
 	unsigned long **psys_syscall_table = &sys_call_table;
-	static atomic_t refs;
-
-	if (atomic_inc_return(&refs) != 1)
-		goto end;
 
 	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
 					FTRACE_SYSCALL_MAX, GFP_KERNEL);
 	if (!syscalls_metadata) {
 		WARN_ON(1);
-		return;
+		return -ENOMEM;
 	}
 
 	for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
 		meta = find_syscall_meta(psys_syscall_table[i]);
 		syscalls_metadata[i] = meta;
 	}
-	return;
 
-	/* Paranoid: avoid overflow */
-end:
-	atomic_dec(&refs);
+	return 0;
 }
+arch_initcall(arch_init_ftrace_syscalls);
 #endif /* CONFIG_FTRACE_SYSCALLS */
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index 4ff507239286..b8fa6524760a 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -147,6 +147,9 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count)
 
 void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
 {
+	if (PXSEG(addr) >= P1SEG)
+		return (void __iomem *)addr;
+
 	return (void __iomem *)(addr + generic_io_base);
 }
 
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 7cb933ba4957..eac7da772fc2 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
+#include <linux/ftrace.h>
 #include <asm/processor.h>
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
@@ -106,7 +107,7 @@ static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
 #endif
 
-asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
+asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 #ifdef CONFIG_IRQSTACKS
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 548f6607fd0f..cbce639b108a 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <asm/machvec.h>
 #include <asm/sections.h>
+#include <asm/addrspace.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -133,4 +134,6 @@ void __init sh_mv_setup(void)
 
 	if (!sh_mv.mv_nr_irqs)
 		sh_mv.mv_nr_irqs = NR_IRQS;
+
+	__set_io_port_base(P2SEG);
 }
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index f9d44f8e0df6..99b4fb553bf1 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -549,6 +549,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	if (cpu == 0)
 		seq_printf(m, "machine\t\t: %s\n", get_system_type());
+	else
+		seq_printf(m, "\n");
 
 	seq_printf(m, "processor\t: %d\n", cpu);
 	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 8dbe26b17c44..444cce3ae921 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -84,6 +84,21 @@ DECLARE_EXPORT(__movstrSI60);
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
 DECLARE_EXPORT(__movstrSI12_i4);
+DECLARE_EXPORT(__movmem);
+DECLARE_EXPORT(__movmemSI8);
+DECLARE_EXPORT(__movmemSI12);
+DECLARE_EXPORT(__movmemSI16);
+DECLARE_EXPORT(__movmemSI20);
+DECLARE_EXPORT(__movmemSI24);
+DECLARE_EXPORT(__movmemSI28);
+DECLARE_EXPORT(__movmemSI32);
+DECLARE_EXPORT(__movmemSI36);
+DECLARE_EXPORT(__movmemSI40);
+DECLARE_EXPORT(__movmemSI44);
+DECLARE_EXPORT(__movmemSI48);
+DECLARE_EXPORT(__movmemSI52);
+DECLARE_EXPORT(__movmemSI56);
+DECLARE_EXPORT(__movmemSI60);
 DECLARE_EXPORT(__movmem_i4_even);
 DECLARE_EXPORT(__movmem_i4_odd);
 DECLARE_EXPORT(__movmemSI12_i4);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 6729703547a1..3db37425210d 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -145,7 +145,7 @@ static inline int restore_sigcontext_fpu(struct sigcontext __user *sc)
 {
 	struct task_struct *tsk = current;
 
-	if (!(current_cpu_data.flags & CPU_HAS_FPU))
+	if (!(boot_cpu_data.flags & CPU_HAS_FPU))
 		return 0;
 
 	set_used_math();
@@ -158,7 +158,7 @@ static inline int save_sigcontext_fpu(struct sigcontext __user *sc,
 {
 	struct task_struct *tsk = current;
 
-	if (!(current_cpu_data.flags & CPU_HAS_FPU))
+	if (!(boot_cpu_data.flags & CPU_HAS_FPU))
 		return 0;
 
 	if (!used_math()) {
@@ -199,7 +199,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p
 #undef COPY
 
 #ifdef CONFIG_SH_FPU
-	if (current_cpu_data.flags & CPU_HAS_FPU) {
+	if (boot_cpu_data.flags & CPU_HAS_FPU) {
 		int owned_fp;
 		struct task_struct *tsk = current;
 
@@ -472,6 +472,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		err |= __put_user(OR_R0_R0, &frame->retcode[6]);
 		err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
 		regs->pr = (unsigned long) frame->retcode;
+		flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 	}
 
 	if (err)
@@ -497,8 +498,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
-
 	return 0;
 
 give_sigsegv:
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 442d8d47a41e..160db1003cfb 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -35,6 +35,8 @@ static inline void __init smp_store_cpu_info(unsigned int cpu)
 {
 	struct sh_cpuinfo *c = cpu_data + cpu;
 
+	memcpy(c, &boot_cpu_data, sizeof(struct sh_cpuinfo));
+
 	c->loops_per_jiffy = loops_per_jiffy;
 }
 
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 69bb1652eccd..7a2ee3a6b8e7 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -25,6 +25,7 @@
 #include <linux/kexec.h>
 #include <linux/limits.h>
 #include <linux/proc_fs.h>
+#include <linux/sysfs.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/fpu.h>
@@ -54,8 +55,8 @@ static unsigned long se_multi;
 /* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
    valid! */
 static int se_usermode = 3;
-/* 0: no warning 1: print a warning message */
-static int se_kernmode_warn = 1;
+/* 0: no warning 1: print a warning message, disabled by default */
+static int se_kernmode_warn;
 
 #ifdef CONFIG_PROC_FS
 static const char *se_usermode_action[] = {
@@ -159,12 +160,12 @@ void die(const char * str, struct pt_regs * regs, long err)
 
 	oops_enter();
 
-	console_verbose();
 	spin_lock_irq(&die_lock);
+	console_verbose();
 	bust_spinlocks(1);
 
 	printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
-
+	sysfs_printk_last_file();
 	print_modules();
 	show_regs(regs);
 
@@ -180,6 +181,7 @@ void die(const char * str, struct pt_regs * regs, long err)
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
+	oops_exit();
 
 	if (kexec_should_crash(current))
 		crash_kexec(regs);
@@ -190,7 +192,6 @@ void die(const char * str, struct pt_regs * regs, long err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
-	oops_exit();
 	do_exit(SIGSEGV);
 }
 
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 64dc1ad59801..7f7b52f9beba 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -227,7 +227,7 @@ endchoice
 
 choice
 	prompt "HugeTLB page size"
-	depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+	depends on HUGETLB_PAGE
 	default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
 	default HUGETLB_PAGE_SIZE_64K
 
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index b2453bbef4cd..519e2d16cd06 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -26,7 +26,7 @@
 #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
 #define MAX_ICACHE_PAGES	32
 
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
 			       unsigned long exec_offset);
 
 /*
@@ -43,7 +43,7 @@ static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
  * Called from kernel/module.c:sys_init_module and routine for a.out format,
  * signal handler code and kprobes code
  */
-static void sh4_flush_icache_range(void *args)
+static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
 {
 	struct flusher_data *data = args;
 	unsigned long start, end;
@@ -89,8 +89,7 @@ static void sh4_flush_icache_range(void *args)
 	local_irq_restore(flags);
 }
 
-static inline void flush_cache_4096(unsigned long start,
-				    unsigned long phys)
+static inline void flush_cache_one(unsigned long start, unsigned long phys)
 {
 	unsigned long flags, exec_offset = 0;
 
@@ -103,8 +102,7 @@ static inline void flush_cache_4096(unsigned long start,
 		exec_offset = 0x20000000;
 
 	local_irq_save(flags);
-	__flush_cache_4096(start | SH_CACHE_ASSOC,
-			   P1SEGADDR(phys), exec_offset);
+	__flush_cache_one(start | SH_CACHE_ASSOC, P1SEGADDR(phys), exec_offset);
 	local_irq_restore(flags);
 }
 
@@ -129,8 +127,8 @@ static void sh4_flush_dcache_page(void *arg)
 
 		/* Loop all the D-cache */
 		n = boot_cpu_data.dcache.n_aliases;
-		for (i = 0; i < n; i++, addr += 4096)
-			flush_cache_4096(addr, phys);
+		for (i = 0; i < n; i++, addr += PAGE_SIZE)
+			flush_cache_one(addr, phys);
 	}
 
 	wmb();
@@ -318,11 +316,11 @@ static void sh4_flush_cache_page(void *args)
 	/* We only need to flush D-cache when we have alias */
 	if ((address^phys) & alias_mask) {
 		/* Loop 4K of the D-cache */
-		flush_cache_4096(
+		flush_cache_one(
 			CACHE_OC_ADDRESS_ARRAY | (address & alias_mask),
 			phys);
 		/* Loop another 4K of the D-cache */
-		flush_cache_4096(
+		flush_cache_one(
 			CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask),
 			phys);
 	}
@@ -337,7 +335,7 @@ static void sh4_flush_cache_page(void *args)
 		 * kernel has never executed the code through its identity
 		 * translation.
 		 */
-		flush_cache_4096(
+		flush_cache_one(
 			CACHE_IC_ADDRESS_ARRAY | (address & alias_mask),
 			phys);
 	}
@@ -393,7 +391,7 @@ static void sh4_flush_cache_range(void *args)
 }
 
 /**
- * __flush_cache_4096
+ * __flush_cache_one
  *
  * @addr:  address in memory mapped cache array
  * @phys:  P1 address to flush (has to match tags if addr has 'A' bit
@@ -406,7 +404,7 @@ static void sh4_flush_cache_range(void *args)
  * operation (purge/write-back) is selected by the lower 2 bits of
  * 'phys'.
  */
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
 			       unsigned long exec_offset)
 {
 	int way_count;
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 2cadee2037ac..2601935eb589 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -78,7 +78,7 @@ static void sh7705_flush_icache_range(void *args)
 /*
  * Writeback&Invalidate the D-cache of the page
  */
-static void __flush_dcache_page(unsigned long phys)
+static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
 {
 	unsigned long ways, waysize, addrstart;
 	unsigned long flags;
@@ -144,7 +144,7 @@ static void sh7705_flush_dcache_page(void *arg)
 		__flush_dcache_page(PHYSADDR(page_address(page)));
 }
 
-static void sh7705_flush_cache_all(void *args)
+static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
 {
 	unsigned long flags;
 
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 35c37b7f717a..a2dc7f9ecc51 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -128,7 +128,7 @@ void __update_cache(struct vm_area_struct *vma,
 		return;
 
 	page = pfn_to_page(pfn);
-	if (pfn_valid(pfn) && page_mapping(page)) {
+	if (pfn_valid(pfn)) {
 		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
 		if (dirty) {
 			unsigned long addr = (unsigned long)page_address(page);
@@ -265,6 +265,8 @@ static void __init emit_cache_params(void)
 
 void __init cpu_cache_init(void)
 {
+	unsigned int cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+
 	compute_alias(&boot_cpu_data.icache);
 	compute_alias(&boot_cpu_data.dcache);
 	compute_alias(&boot_cpu_data.scache);
@@ -273,6 +275,13 @@ void __init cpu_cache_init(void)
 	__flush_purge_region		= noop__flush_region;
 	__flush_invalidate_region	= noop__flush_region;
 
+	/*
+	 * No flushing is necessary in the disabled cache case so we can
+	 * just keep the noop functions in local_flush_..() and __flush_..()
+	 */
+	if (unlikely(cache_disabled))
+		goto skip;
+
 	if (boot_cpu_data.family == CPU_FAMILY_SH2) {
 		extern void __weak sh2_cache_init(void);
 
@@ -312,5 +321,6 @@ void __init cpu_cache_init(void)
 		sh5_cache_init();
 	}
 
+skip:
 	emit_cache_params();
 }
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index c3250614e3ae..a86eaa9d75a5 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -83,7 +83,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	 *
 	 * PMB entries are all pre-faulted.
 	 */
-	if (unlikely(size >= 0x1000000)) {
+	if (unlikely(phys_addr >= P1SEG)) {
 		unsigned long mapped = pmb_remap(addr, phys_addr, size, flags);
 
 		if (likely(mapped)) {
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index b1a714a92b14..aade31102112 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -33,6 +33,8 @@
 
 #define NR_PMB_ENTRIES	16
 
+static void __pmb_unmap(struct pmb_entry *);
+
 static struct kmem_cache *pmb_cache;
 static unsigned long pmb_map;
 
@@ -218,9 +220,10 @@ static struct {
 long pmb_remap(unsigned long vaddr, unsigned long phys,
 	       unsigned long size, unsigned long flags)
 {
-	struct pmb_entry *pmbp;
+	struct pmb_entry *pmbp, *pmbe;
 	unsigned long wanted;
 	int pmb_flags, i;
+	long err;
 
 	/* Convert typical pgprot value to the PMB equivalent */
 	if (flags & _PAGE_CACHABLE) {
@@ -236,20 +239,22 @@ long pmb_remap(unsigned long vaddr, unsigned long phys,
 
 again:
 	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
-		struct pmb_entry *pmbe;
 		int ret;
 
 		if (size < pmb_sizes[i].size)
 			continue;
 
 		pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
-		if (IS_ERR(pmbe))
-			return PTR_ERR(pmbe);
+		if (IS_ERR(pmbe)) {
+			err = PTR_ERR(pmbe);
+			goto out;
+		}
 
 		ret = set_pmb_entry(pmbe);
 		if (ret != 0) {
 			pmb_free(pmbe);
-			return -EBUSY;
+			err = -EBUSY;
+			goto out;
 		}
 
 		phys	+= pmb_sizes[i].size;
@@ -264,12 +269,25 @@ again:
 			pmbp->link = pmbe;
 
 		pmbp = pmbe;
+
+		/*
+		 * Instead of trying smaller sizes on every iteration
+		 * (even if we succeed in allocating space), try using
+		 * pmb_sizes[i].size again.
+		 */
+		i--;
 	}
 
 	if (size >= 0x1000000)
 		goto again;
 
 	return wanted - size;
+
+out:
+	if (pmbp)
+		__pmb_unmap(pmbp);
+
+	return err;
 }
 
 void pmb_unmap(unsigned long addr)
@@ -283,12 +301,19 @@ void pmb_unmap(unsigned long addr)
 	if (unlikely(!pmbe))
 		return;
 
+	__pmb_unmap(pmbe);
+}
+
+static void __pmb_unmap(struct pmb_entry *pmbe)
+{
 	WARN_ON(!test_bit(pmbe->entry, &pmb_map));
 
 	do {
 		struct pmb_entry *pmblink = pmbe;
 
-		clear_pmb_entry(pmbe);
+		if (pmbe->entry != PMB_NO_ENTRY)
+			clear_pmb_entry(pmbe);
+
 		pmbe = pmblink->link;
 
 		pmb_free(pmblink);
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index ac45aab741a5..05ef5380a687 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -26,6 +26,7 @@ config SPARC
 	select RTC_CLASS
 	select RTC_DRV_M48T59
 	select HAVE_PERF_EVENTS
+	select PERF_USE_VMALLOC
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 
@@ -48,6 +49,7 @@ config SPARC64
 	select RTC_DRV_SUN4V
 	select RTC_DRV_STARFIRE
 	select HAVE_PERF_EVENTS
+	select PERF_USE_VMALLOC
 
 config ARCH_DEFCONFIG
 	string
diff --git a/arch/sparc/include/asm/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h
index 4f63ed8df551..162007643cdc 100644
--- a/arch/sparc/include/asm/hardirq_32.h
+++ b/arch/sparc/include/asm/hardirq_32.h
@@ -7,17 +7,7 @@
 #ifndef __SPARC_HARDIRQ_H
 #define __SPARC_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-
-/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 #define HARDIRQ_BITS    8
+#include <asm-generic/hardirq.h>
 
 #endif /* __SPARC_HARDIRQ_H */
diff --git a/arch/sparc/include/asm/irq_32.h b/arch/sparc/include/asm/irq_32.h
index ea43057d4763..cbf4801deaaf 100644
--- a/arch/sparc/include/asm/irq_32.h
+++ b/arch/sparc/include/asm/irq_32.h
@@ -6,10 +6,10 @@
 #ifndef _SPARC_IRQ_H
 #define _SPARC_IRQ_H
 
-#include <linux/interrupt.h>
-
 #define NR_IRQS    16
 
+#include <linux/interrupt.h>
+
 #define irq_canonicalize(irq)	(irq)
 
 extern void __init init_IRQ(void);
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index 0ff92fa22064..f3cb790fa2ae 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -41,8 +41,8 @@
 #define LOW_OBP_ADDRESS		_AC(0x00000000f0000000,UL)
 #define HI_OBP_ADDRESS		_AC(0x0000000100000000,UL)
 #define VMALLOC_START		_AC(0x0000000100000000,UL)
-#define VMALLOC_END		_AC(0x0000000200000000,UL)
-#define VMEMMAP_BASE		_AC(0x0000000200000000,UL)
+#define VMALLOC_END		_AC(0x0000010000000000,UL)
+#define VMEMMAP_BASE		_AC(0x0000010000000000,UL)
 
 #define vmemmap			((struct page *)VMEMMAP_BASE)
 
diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S
index 3ea6e8cde8c5..1d361477d7d6 100644
--- a/arch/sparc/kernel/ktlb.S
+++ b/arch/sparc/kernel/ktlb.S
@@ -280,8 +280,8 @@ kvmap_dtlb_nonlinear:
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 	/* Do not use the TSB for vmemmap.  */
-	mov		(VMEMMAP_BASE >> 24), %g5
-	sllx		%g5, 24, %g5
+	mov		(VMEMMAP_BASE >> 40), %g5
+	sllx		%g5, 40, %g5
 	cmp		%g4,%g5
 	bgeu,pn		%xcc, kvmap_vmemmap
 	 nop
@@ -293,8 +293,8 @@ kvmap_dtlb_tsbmiss:
 	sethi		%hi(MODULES_VADDR), %g5
 	cmp		%g4, %g5
 	blu,pn		%xcc, kvmap_dtlb_longpath
-	 mov		(VMALLOC_END >> 24), %g5
-	sllx		%g5, 24, %g5
+	 mov		(VMALLOC_END >> 40), %g5
+	sllx		%g5, 40, %g5
 	cmp		%g4, %g5
 	bgeu,pn		%xcc, kvmap_dtlb_longpath
 	 nop
diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c
index adf5f273868a..cb3c72c45aab 100644
--- a/arch/sparc/kernel/ldc.c
+++ b/arch/sparc/kernel/ldc.c
@@ -1242,13 +1242,13 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 	snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name);
 
 	err = request_irq(lp->cfg.rx_irq, ldc_rx,
-			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
+			  IRQF_SAMPLE_RANDOM | IRQF_DISABLED | IRQF_SHARED,
 			  lp->rx_irq_name, lp);
 	if (err)
 		return err;
 
 	err = request_irq(lp->cfg.tx_irq, ldc_tx,
-			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
+			  IRQF_SAMPLE_RANDOM | IRQF_DISABLED | IRQF_SHARED,
 			  lp->tx_irq_name, lp);
 	if (err) {
 		free_irq(lp->cfg.rx_irq, lp);
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 2d6a1b10c81d..fa5936e1c3b9 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -56,7 +56,8 @@ struct cpu_hw_events {
 	struct perf_event	*events[MAX_HWEVENTS];
 	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
 	unsigned long		active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
-	int enabled;
+	u64			pcr;
+	int			enabled;
 };
 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
 
@@ -68,8 +69,30 @@ struct perf_event_map {
 #define PIC_LOWER	0x02
 };
 
+static unsigned long perf_event_encode(const struct perf_event_map *pmap)
+{
+	return ((unsigned long) pmap->encoding << 16) | pmap->pic_mask;
+}
+
+static void perf_event_decode(unsigned long val, u16 *enc, u8 *msk)
+{
+	*msk = val & 0xff;
+	*enc = val >> 16;
+}
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+#define CACHE_OP_UNSUPPORTED	0xfffe
+#define CACHE_OP_NONSENSE	0xffff
+
+typedef struct perf_event_map cache_map_t
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX];
+
 struct sparc_pmu {
 	const struct perf_event_map	*(*event_map)(int);
+	const cache_map_t		*cache_map;
 	int				max_events;
 	int				upper_shift;
 	int				lower_shift;
@@ -80,21 +103,109 @@ struct sparc_pmu {
 	int				lower_nop;
 };
 
-static const struct perf_event_map ultra3i_perfmon_event_map[] = {
+static const struct perf_event_map ultra3_perfmon_event_map[] = {
 	[PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER },
 	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER },
 	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0009, PIC_LOWER },
 	[PERF_COUNT_HW_CACHE_MISSES] = { 0x0009, PIC_UPPER },
 };
 
-static const struct perf_event_map *ultra3i_event_map(int event_id)
+static const struct perf_event_map *ultra3_event_map(int event_id)
 {
-	return &ultra3i_perfmon_event_map[event_id];
+	return &ultra3_perfmon_event_map[event_id];
 }
 
-static const struct sparc_pmu ultra3i_pmu = {
-	.event_map	= ultra3i_event_map,
-	.max_events	= ARRAY_SIZE(ultra3i_perfmon_event_map),
+static const cache_map_t ultra3_cache_map = {
+[C(L1D)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { 0x09, PIC_LOWER, },
+		[C(RESULT_MISS)] = { 0x09, PIC_UPPER, },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)] = { 0x0a, PIC_LOWER },
+		[C(RESULT_MISS)] = { 0x0a, PIC_UPPER },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { 0x09, PIC_LOWER, },
+		[C(RESULT_MISS)] = { 0x09, PIC_UPPER, },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_NONSENSE },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(LL)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { 0x0c, PIC_LOWER, },
+		[C(RESULT_MISS)] = { 0x0c, PIC_UPPER, },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)] = { 0x0c, PIC_LOWER },
+		[C(RESULT_MISS)] = { 0x0c, PIC_UPPER },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(DTLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0x12, PIC_UPPER, },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0x11, PIC_UPPER, },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(BPU)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+};
+
+static const struct sparc_pmu ultra3_pmu = {
+	.event_map	= ultra3_event_map,
+	.cache_map	= &ultra3_cache_map,
+	.max_events	= ARRAY_SIZE(ultra3_perfmon_event_map),
 	.upper_shift	= 11,
 	.lower_shift	= 4,
 	.event_mask	= 0x3f,
@@ -102,6 +213,121 @@ static const struct sparc_pmu ultra3i_pmu = {
 	.lower_nop	= 0x14,
 };
 
+/* Niagara1 is very limited.  The upper PIC is hard-locked to count
+ * only instructions, so it is free running which creates all kinds of
+ * problems.  Some hardware designs make one wonder if the creator
+ * even looked at how this stuff gets used by software.
+ */
+static const struct perf_event_map niagara1_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x00, PIC_UPPER },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, PIC_UPPER },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0, PIC_NONE },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x03, PIC_LOWER },
+};
+
+static const struct perf_event_map *niagara1_event_map(int event_id)
+{
+	return &niagara1_perfmon_event_map[event_id];
+}
+
+static const cache_map_t niagara1_cache_map = {
+[C(L1D)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0x03, PIC_LOWER, },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0x03, PIC_LOWER, },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { 0x00, PIC_UPPER },
+		[C(RESULT_MISS)] = { 0x02, PIC_LOWER, },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_NONSENSE },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(LL)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0x07, PIC_LOWER, },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0x07, PIC_LOWER, },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(DTLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0x05, PIC_LOWER, },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0x04, PIC_LOWER, },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(BPU)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+};
+
+static const struct sparc_pmu niagara1_pmu = {
+	.event_map	= niagara1_event_map,
+	.cache_map	= &niagara1_cache_map,
+	.max_events	= ARRAY_SIZE(niagara1_perfmon_event_map),
+	.upper_shift	= 0,
+	.lower_shift	= 4,
+	.event_mask	= 0x7,
+	.upper_nop	= 0x0,
+	.lower_nop	= 0x0,
+};
+
 static const struct perf_event_map niagara2_perfmon_event_map[] = {
 	[PERF_COUNT_HW_CPU_CYCLES] = { 0x02ff, PIC_UPPER | PIC_LOWER },
 	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x02ff, PIC_UPPER | PIC_LOWER },
@@ -116,14 +342,102 @@ static const struct perf_event_map *niagara2_event_map(int event_id)
 	return &niagara2_perfmon_event_map[event_id];
 }
 
+static const cache_map_t niagara2_cache_map = {
+[C(L1D)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { 0x0208, PIC_UPPER | PIC_LOWER, },
+		[C(RESULT_MISS)] = { 0x0302, PIC_UPPER | PIC_LOWER, },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)] = { 0x0210, PIC_UPPER | PIC_LOWER, },
+		[C(RESULT_MISS)] = { 0x0302, PIC_UPPER | PIC_LOWER, },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { 0x02ff, PIC_UPPER | PIC_LOWER, },
+		[C(RESULT_MISS)] = { 0x0301, PIC_UPPER | PIC_LOWER, },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_NONSENSE },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(LL)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { 0x0208, PIC_UPPER | PIC_LOWER, },
+		[C(RESULT_MISS)] = { 0x0330, PIC_UPPER | PIC_LOWER, },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)] = { 0x0210, PIC_UPPER | PIC_LOWER, },
+		[C(RESULT_MISS)] = { 0x0320, PIC_UPPER | PIC_LOWER, },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(DTLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0x0b08, PIC_UPPER | PIC_LOWER, },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { 0xb04, PIC_UPPER | PIC_LOWER, },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(BPU)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+};
+
 static const struct sparc_pmu niagara2_pmu = {
 	.event_map	= niagara2_event_map,
+	.cache_map	= &niagara2_cache_map,
 	.max_events	= ARRAY_SIZE(niagara2_perfmon_event_map),
 	.upper_shift	= 19,
 	.lower_shift	= 6,
 	.event_mask	= 0xfff,
 	.hv_bit		= 0x8,
-	.irq_bit	= 0x03,
+	.irq_bit	= 0x30,
 	.upper_nop	= 0x220,
 	.lower_nop	= 0x220,
 };
@@ -151,23 +465,30 @@ static u64 nop_for_index(int idx)
 			      sparc_pmu->lower_nop, idx);
 }
 
-static inline void sparc_pmu_enable_event(struct hw_perf_event *hwc,
-					    int idx)
+static inline void sparc_pmu_enable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx)
 {
 	u64 val, mask = mask_for_index(idx);
 
-	val = pcr_ops->read();
-	pcr_ops->write((val & ~mask) | hwc->config);
+	val = cpuc->pcr;
+	val &= ~mask;
+	val |= hwc->config;
+	cpuc->pcr = val;
+
+	pcr_ops->write(cpuc->pcr);
 }
 
-static inline void sparc_pmu_disable_event(struct hw_perf_event *hwc,
-					     int idx)
+static inline void sparc_pmu_disable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx)
 {
 	u64 mask = mask_for_index(idx);
 	u64 nop = nop_for_index(idx);
-	u64 val = pcr_ops->read();
+	u64 val;
 
-	pcr_ops->write((val & ~mask) | nop);
+	val = cpuc->pcr;
+	val &= ~mask;
+	val |= nop;
+	cpuc->pcr = val;
+
+	pcr_ops->write(cpuc->pcr);
 }
 
 void hw_perf_enable(void)
@@ -182,7 +503,7 @@ void hw_perf_enable(void)
 	cpuc->enabled = 1;
 	barrier();
 
-	val = pcr_ops->read();
+	val = cpuc->pcr;
 
 	for (i = 0; i < MAX_HWEVENTS; i++) {
 		struct perf_event *cp = cpuc->events[i];
@@ -194,7 +515,9 @@ void hw_perf_enable(void)
 		val |= hwc->config_base;
 	}
 
-	pcr_ops->write(val);
+	cpuc->pcr = val;
+
+	pcr_ops->write(cpuc->pcr);
 }
 
 void hw_perf_disable(void)
@@ -207,10 +530,12 @@ void hw_perf_disable(void)
 
 	cpuc->enabled = 0;
 
-	val = pcr_ops->read();
+	val = cpuc->pcr;
 	val &= ~(PCR_UTRACE | PCR_STRACE |
 		 sparc_pmu->hv_bit | sparc_pmu->irq_bit);
-	pcr_ops->write(val);
+	cpuc->pcr = val;
+
+	pcr_ops->write(cpuc->pcr);
 }
 
 static u32 read_pmc(int idx)
@@ -242,7 +567,7 @@ static void write_pmc(int idx, u64 val)
 }
 
 static int sparc_perf_event_set_period(struct perf_event *event,
-					 struct hw_perf_event *hwc, int idx)
+				       struct hw_perf_event *hwc, int idx)
 {
 	s64 left = atomic64_read(&hwc->period_left);
 	s64 period = hwc->sample_period;
@@ -282,19 +607,19 @@ static int sparc_pmu_enable(struct perf_event *event)
 	if (test_and_set_bit(idx, cpuc->used_mask))
 		return -EAGAIN;
 
-	sparc_pmu_disable_event(hwc, idx);
+	sparc_pmu_disable_event(cpuc, hwc, idx);
 
 	cpuc->events[idx] = event;
 	set_bit(idx, cpuc->active_mask);
 
 	sparc_perf_event_set_period(event, hwc, idx);
-	sparc_pmu_enable_event(hwc, idx);
+	sparc_pmu_enable_event(cpuc, hwc, idx);
 	perf_event_update_userpage(event);
 	return 0;
 }
 
 static u64 sparc_perf_event_update(struct perf_event *event,
-				     struct hw_perf_event *hwc, int idx)
+				   struct hw_perf_event *hwc, int idx)
 {
 	int shift = 64 - 32;
 	u64 prev_raw_count, new_raw_count;
@@ -324,7 +649,7 @@ static void sparc_pmu_disable(struct perf_event *event)
 	int idx = hwc->idx;
 
 	clear_bit(idx, cpuc->active_mask);
-	sparc_pmu_disable_event(hwc, idx);
+	sparc_pmu_disable_event(cpuc, hwc, idx);
 
 	barrier();
 
@@ -338,18 +663,29 @@ static void sparc_pmu_disable(struct perf_event *event)
 static void sparc_pmu_read(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
+
 	sparc_perf_event_update(event, hwc, hwc->idx);
 }
 
 static void sparc_pmu_unthrottle(struct perf_event *event)
 {
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
-	sparc_pmu_enable_event(hwc, hwc->idx);
+
+	sparc_pmu_enable_event(cpuc, hwc, hwc->idx);
 }
 
 static atomic_t active_events = ATOMIC_INIT(0);
 static DEFINE_MUTEX(pmc_grab_mutex);
 
+static void perf_stop_nmi_watchdog(void *unused)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	stop_nmi_watchdog(NULL);
+	cpuc->pcr = pcr_ops->read();
+}
+
 void perf_event_grab_pmc(void)
 {
 	if (atomic_inc_not_zero(&active_events))
@@ -358,7 +694,7 @@ void perf_event_grab_pmc(void)
 	mutex_lock(&pmc_grab_mutex);
 	if (atomic_read(&active_events) == 0) {
 		if (atomic_read(&nmi_active) > 0) {
-			on_each_cpu(stop_nmi_watchdog, NULL, 1);
+			on_each_cpu(perf_stop_nmi_watchdog, NULL, 1);
 			BUG_ON(atomic_read(&nmi_active) != 0);
 		}
 		atomic_inc(&active_events);
@@ -375,30 +711,160 @@ void perf_event_release_pmc(void)
 	}
 }
 
+static const struct perf_event_map *sparc_map_cache_event(u64 config)
+{
+	unsigned int cache_type, cache_op, cache_result;
+	const struct perf_event_map *pmap;
+
+	if (!sparc_pmu->cache_map)
+		return ERR_PTR(-ENOENT);
+
+	cache_type = (config >>  0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return ERR_PTR(-EINVAL);
+
+	cache_op = (config >>  8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return ERR_PTR(-EINVAL);
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return ERR_PTR(-EINVAL);
+
+	pmap = &((*sparc_pmu->cache_map)[cache_type][cache_op][cache_result]);
+
+	if (pmap->encoding == CACHE_OP_UNSUPPORTED)
+		return ERR_PTR(-ENOENT);
+
+	if (pmap->encoding == CACHE_OP_NONSENSE)
+		return ERR_PTR(-EINVAL);
+
+	return pmap;
+}
+
 static void hw_perf_event_destroy(struct perf_event *event)
 {
 	perf_event_release_pmc();
 }
 
+/* Make sure all events can be scheduled into the hardware at
+ * the same time.  This is simplified by the fact that we only
+ * need to support 2 simultaneous HW events.
+ */
+static int sparc_check_constraints(unsigned long *events, int n_ev)
+{
+	if (n_ev <= perf_max_events) {
+		u8 msk1, msk2;
+		u16 dummy;
+
+		if (n_ev == 1)
+			return 0;
+		BUG_ON(n_ev != 2);
+		perf_event_decode(events[0], &dummy, &msk1);
+		perf_event_decode(events[1], &dummy, &msk2);
+
+		/* If both events can go on any counter, OK.  */
+		if (msk1 == (PIC_UPPER | PIC_LOWER) &&
+		    msk2 == (PIC_UPPER | PIC_LOWER))
+			return 0;
+
+		/* If one event is limited to a specific counter,
+		 * and the other can go on both, OK.
+		 */
+		if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) &&
+		    msk2 == (PIC_UPPER | PIC_LOWER))
+			return 0;
+		if ((msk2 == PIC_UPPER || msk2 == PIC_LOWER) &&
+		    msk1 == (PIC_UPPER | PIC_LOWER))
+			return 0;
+
+		/* If the events are fixed to different counters, OK.  */
+		if ((msk1 == PIC_UPPER && msk2 == PIC_LOWER) ||
+		    (msk1 == PIC_LOWER && msk2 == PIC_UPPER))
+			return 0;
+
+		/* Otherwise, there is a conflict.  */
+	}
+
+	return -1;
+}
+
+static int check_excludes(struct perf_event **evts, int n_prev, int n_new)
+{
+	int eu = 0, ek = 0, eh = 0;
+	struct perf_event *event;
+	int i, n, first;
+
+	n = n_prev + n_new;
+	if (n <= 1)
+		return 0;
+
+	first = 1;
+	for (i = 0; i < n; i++) {
+		event = evts[i];
+		if (first) {
+			eu = event->attr.exclude_user;
+			ek = event->attr.exclude_kernel;
+			eh = event->attr.exclude_hv;
+			first = 0;
+		} else if (event->attr.exclude_user != eu ||
+			   event->attr.exclude_kernel != ek ||
+			   event->attr.exclude_hv != eh) {
+			return -EAGAIN;
+		}
+	}
+
+	return 0;
+}
+
+static int collect_events(struct perf_event *group, int max_count,
+			  struct perf_event *evts[], unsigned long *events)
+{
+	struct perf_event *event;
+	int n = 0;
+
+	if (!is_software_event(group)) {
+		if (n >= max_count)
+			return -1;
+		evts[n] = group;
+		events[n++] = group->hw.event_base;
+	}
+	list_for_each_entry(event, &group->sibling_list, group_entry) {
+		if (!is_software_event(event) &&
+		    event->state != PERF_EVENT_STATE_OFF) {
+			if (n >= max_count)
+				return -1;
+			evts[n] = event;
+			events[n++] = event->hw.event_base;
+		}
+	}
+	return n;
+}
+
 static int __hw_perf_event_init(struct perf_event *event)
 {
 	struct perf_event_attr *attr = &event->attr;
+	struct perf_event *evts[MAX_HWEVENTS];
 	struct hw_perf_event *hwc = &event->hw;
+	unsigned long events[MAX_HWEVENTS];
 	const struct perf_event_map *pmap;
 	u64 enc;
+	int n;
 
 	if (atomic_read(&nmi_active) < 0)
 		return -ENODEV;
 
-	if (attr->type != PERF_TYPE_HARDWARE)
+	if (attr->type == PERF_TYPE_HARDWARE) {
+		if (attr->config >= sparc_pmu->max_events)
+			return -EINVAL;
+		pmap = sparc_pmu->event_map(attr->config);
+	} else if (attr->type == PERF_TYPE_HW_CACHE) {
+		pmap = sparc_map_cache_event(attr->config);
+		if (IS_ERR(pmap))
+			return PTR_ERR(pmap);
+	} else
 		return -EOPNOTSUPP;
 
-	if (attr->config >= sparc_pmu->max_events)
-		return -EINVAL;
-
-	perf_event_grab_pmc();
-	event->destroy = hw_perf_event_destroy;
-
 	/* We save the enable bits in the config_base.  So to
 	 * turn off sampling just write 'config', and to enable
 	 * things write 'config | config_base'.
@@ -411,15 +877,39 @@ static int __hw_perf_event_init(struct perf_event *event)
 	if (!attr->exclude_hv)
 		hwc->config_base |= sparc_pmu->hv_bit;
 
+	hwc->event_base = perf_event_encode(pmap);
+
+	enc = pmap->encoding;
+
+	n = 0;
+	if (event->group_leader != event) {
+		n = collect_events(event->group_leader,
+				   perf_max_events - 1,
+				   evts, events);
+		if (n < 0)
+			return -EINVAL;
+	}
+	events[n] = hwc->event_base;
+	evts[n] = event;
+
+	if (check_excludes(evts, n, 1))
+		return -EINVAL;
+
+	if (sparc_check_constraints(events, n + 1))
+		return -EINVAL;
+
+	/* Try to do all error checking before this point, as unwinding
+	 * state after grabbing the PMC is difficult.
+	 */
+	perf_event_grab_pmc();
+	event->destroy = hw_perf_event_destroy;
+
 	if (!hwc->sample_period) {
 		hwc->sample_period = MAX_PERIOD;
 		hwc->last_period = hwc->sample_period;
 		atomic64_set(&hwc->period_left, hwc->sample_period);
 	}
 
-	pmap = sparc_pmu->event_map(attr->config);
-
-	enc = pmap->encoding;
 	if (pmap->pic_mask & PIC_UPPER) {
 		hwc->idx = PIC_UPPER_INDEX;
 		enc <<= sparc_pmu->upper_shift;
@@ -472,7 +962,7 @@ void perf_event_print_debug(void)
 }
 
 static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
-					      unsigned long cmd, void *__args)
+					    unsigned long cmd, void *__args)
 {
 	struct die_args *args = __args;
 	struct perf_sample_data data;
@@ -513,7 +1003,7 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
 			continue;
 
 		if (perf_event_overflow(event, 1, &data, regs))
-			sparc_pmu_disable_event(hwc, idx);
+			sparc_pmu_disable_event(cpuc, hwc, idx);
 	}
 
 	return NOTIFY_STOP;
@@ -525,8 +1015,15 @@ static __read_mostly struct notifier_block perf_event_nmi_notifier = {
 
 static bool __init supported_pmu(void)
 {
-	if (!strcmp(sparc_pmu_type, "ultra3i")) {
-		sparc_pmu = &ultra3i_pmu;
+	if (!strcmp(sparc_pmu_type, "ultra3") ||
+	    !strcmp(sparc_pmu_type, "ultra3+") ||
+	    !strcmp(sparc_pmu_type, "ultra3i") ||
+	    !strcmp(sparc_pmu_type, "ultra4+")) {
+		sparc_pmu = &ultra3_pmu;
+		return true;
+	}
+	if (!strcmp(sparc_pmu_type, "niagara")) {
+		sparc_pmu = &niagara1_pmu;
 		return true;
 	}
 	if (!strcmp(sparc_pmu_type, "niagara2")) {
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index a70a5e1904d9..1886d37d411b 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -265,7 +265,7 @@ static void flush_dcache(unsigned long pfn)
 	struct page *page;
 
 	page = pfn_to_page(pfn);
-	if (page && page_mapping(page)) {
+	if (page) {
 		unsigned long pg_flags;
 
 		pg_flags = page->flags;
diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index f97cb8b6ee5f..f9024bccff16 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -11,6 +11,7 @@
 #include <linux/oprofile.h>
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/param.h>	/* for HZ */
  
 #ifdef CONFIG_SPARC64
 #include <linux/notifier.h>
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 14a102e877d6..cf8a97f34518 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -5,6 +5,7 @@
 
 #include "linux/irqreturn.h"
 #include "linux/kd.h"
+#include "linux/sched.h"
 #include "chan_kern.h"
 #include "irq_kern.h"
 #include "irq_user.h"
diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c
index 19930081d3d8..4ebc8a34738f 100644
--- a/arch/um/drivers/port_kern.c
+++ b/arch/um/drivers/port_kern.c
@@ -7,6 +7,7 @@
 #include "linux/interrupt.h"
 #include "linux/list.h"
 #include "linux/mutex.h"
+#include "linux/workqueue.h"
 #include "asm/atomic.h"
 #include "init.h"
 #include "irq_kern.h"
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 454cdb43e351..039270b9b73b 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -10,6 +10,7 @@
 #include "linux/interrupt.h"
 #include "linux/kernel_stat.h"
 #include "linux/module.h"
+#include "linux/sched.h"
 #include "linux/seq_file.h"
 #include "as-layout.h"
 #include "kern_util.h"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8da93745c087..07e01149e3bf 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -86,10 +86,6 @@ config STACKTRACE_SUPPORT
 config HAVE_LATENCYTOP_SUPPORT
 	def_bool y
 
-config FAST_CMPXCHG_LOCAL
-	bool
-	default y
-
 config MMU
 	def_bool y
 
@@ -495,7 +491,7 @@ if PARAVIRT_GUEST
 source "arch/x86/xen/Kconfig"
 
 config VMI
-	bool "VMI Guest support"
+	bool "VMI Guest support (DEPRECATED)"
 	select PARAVIRT
 	depends on X86_32
 	---help---
@@ -504,6 +500,15 @@ config VMI
 	  at the moment), by linking the kernel to a GPL-ed ROM module
 	  provided by the hypervisor.
 
+	  As of September 2009, VMware has started a phased retirement
+	  of this feature from VMware's products. Please see
+	  feature-removal-schedule.txt for details.  If you are
+	  planning to enable this option, please note that you cannot
+	  live migrate a VMI enabled VM to a future VMware product,
+	  which doesn't support VMI. So if you expect your kernel to
+	  seamlessly migrate to newer VMware products, keep this
+	  disabled.
+
 config KVM_CLOCK
 	bool "KVM paravirtualized clock"
 	select PARAVIRT
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 527519b8a9f9..f2824fb8c79c 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -400,7 +400,7 @@ config X86_TSC
 
 config X86_CMPXCHG64
 	def_bool y
-	depends on X86_PAE || X86_64
+	depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM
 
 # this should be set for all -march=.. options where the compiler
 # generates cmov.
@@ -412,6 +412,7 @@ config X86_MINIMUM_CPU_FAMILY
 	int
 	default "64" if X86_64
 	default "6" if X86_32 && X86_P6_NOP
+	default "5" if X86_32 && X86_CMPXCHG64
 	default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
 	default "3"
 
diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld
index 0f6ec455a2b1..03c0683636b6 100644
--- a/arch/x86/boot/setup.ld
+++ b/arch/x86/boot/setup.ld
@@ -53,6 +53,9 @@ SECTIONS
 
 	/DISCARD/ : { *(.note*) }
 
+	/*
+	 * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+	 */
 	. = ASSERT(_end <= 0x8000, "Setup too big!");
 	. = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
 	/* Necessary for the very-old-loader check to work... */
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 585edebe12cf..49c552c060e9 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -82,7 +82,7 @@ static int aes_set_key_common(struct crypto_tfm *tfm, void *raw_ctx,
 		return -EINVAL;
 	}
 
-	if (irq_fpu_usable())
+	if (!irq_fpu_usable())
 		err = crypto_aes_expand_key(ctx, in_key, key_len);
 	else {
 		kernel_fpu_begin();
@@ -103,7 +103,7 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
 	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
 
-	if (irq_fpu_usable())
+	if (!irq_fpu_usable())
 		crypto_aes_encrypt_x86(ctx, dst, src);
 	else {
 		kernel_fpu_begin();
@@ -116,7 +116,7 @@ static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
 	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
 
-	if (irq_fpu_usable())
+	if (!irq_fpu_usable())
 		crypto_aes_decrypt_x86(ctx, dst, src);
 	else {
 		kernel_fpu_begin();
@@ -342,7 +342,7 @@ static int ablk_encrypt(struct ablkcipher_request *req)
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (irq_fpu_usable()) {
+	if (!irq_fpu_usable()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 		memcpy(cryptd_req, req, sizeof(*req));
@@ -363,7 +363,7 @@ static int ablk_decrypt(struct ablkcipher_request *req)
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (irq_fpu_usable()) {
+	if (!irq_fpu_usable()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 		memcpy(cryptd_req, req, sizeof(*req));
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 74619c4f9fda..1733f9f65e82 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -21,8 +21,8 @@
 #define __AUDIT_ARCH_LE	   0x40000000
 
 #ifndef CONFIG_AUDITSYSCALL
-#define sysexit_audit int_ret_from_sys_call
-#define sysretl_audit int_ret_from_sys_call
+#define sysexit_audit ia32_ret_from_sys_call
+#define sysretl_audit ia32_ret_from_sys_call
 #endif
 
 #define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8)
@@ -39,12 +39,12 @@
 	.endm 
 
 	/* clobbers %eax */	
-	.macro  CLEAR_RREGS _r9=rax
+	.macro  CLEAR_RREGS offset=0, _r9=rax
 	xorl 	%eax,%eax
-	movq	%rax,R11(%rsp)
-	movq	%rax,R10(%rsp)
-	movq	%\_r9,R9(%rsp)
-	movq	%rax,R8(%rsp)
+	movq	%rax,\offset+R11(%rsp)
+	movq	%rax,\offset+R10(%rsp)
+	movq	%\_r9,\offset+R9(%rsp)
+	movq	%rax,\offset+R8(%rsp)
 	.endm
 
 	/*
@@ -172,6 +172,10 @@ sysexit_from_sys_call:
 	movl	RIP-R11(%rsp),%edx		/* User %eip */
 	CFI_REGISTER rip,rdx
 	RESTORE_ARGS 1,24,1,1,1,1
+	xorq	%r8,%r8
+	xorq	%r9,%r9
+	xorq	%r10,%r10
+	xorq	%r11,%r11
 	popfq
 	CFI_ADJUST_CFA_OFFSET -8
 	/*CFI_RESTORE rflags*/
@@ -202,7 +206,7 @@ sysexit_from_sys_call:
 
 	.macro auditsys_exit exit,ebpsave=RBP
 	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
-	jnz int_ret_from_sys_call
+	jnz ia32_ret_from_sys_call
 	TRACE_IRQS_ON
 	sti
 	movl %eax,%esi		/* second arg, syscall return value */
@@ -218,8 +222,9 @@ sysexit_from_sys_call:
 	cli
 	TRACE_IRQS_OFF
 	testl %edi,TI_flags(%r10)
-	jnz int_with_check
-	jmp \exit
+	jz \exit
+	CLEAR_RREGS -ARGOFFSET
+	jmp int_with_check
 	.endm
 
 sysenter_auditsys:
@@ -329,6 +334,9 @@ sysretl_from_sys_call:
 	CFI_REGISTER rip,rcx
 	movl EFLAGS-ARGOFFSET(%rsp),%r11d	
 	/*CFI_REGISTER rflags,r11*/
+	xorq	%r10,%r10
+	xorq	%r9,%r9
+	xorq	%r8,%r8
 	TRACE_IRQS_ON
 	movl RSP-ARGOFFSET(%rsp),%esp
 	CFI_RESTORE rsp
@@ -353,7 +361,7 @@ cstar_tracesys:
 #endif
 	xchgl %r9d,%ebp
 	SAVE_REST
-	CLEAR_RREGS r9
+	CLEAR_RREGS 0, r9
 	movq $-ENOSYS,RAX(%rsp)	/* ptrace can change this for a bad syscall */
 	movq %rsp,%rdi        /* &pt_regs -> arg1 */
 	call syscall_trace_enter
@@ -425,6 +433,8 @@ ia32_do_call:
 	call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
 ia32_sysret:
 	movq %rax,RAX-ARGOFFSET(%rsp)
+ia32_ret_from_sys_call:
+	CLEAR_RREGS -ARGOFFSET
 	jmp int_ret_from_sys_call 
 
 ia32_tracesys:			 
@@ -442,8 +452,8 @@ END(ia32_syscall)
 
 ia32_badsys:
 	movq $0,ORIG_RAX-ARGOFFSET(%rsp)
-	movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
-	jmp int_ret_from_sys_call
+	movq $-ENOSYS,%rax
+	jmp ia32_sysret
 
 quiet_ni_syscall:
 	movq $-ENOSYS,%rax
diff --git a/arch/x86/include/asm/checksum_32.h b/arch/x86/include/asm/checksum_32.h
index 7c5ef8b14d92..46fc474fd819 100644
--- a/arch/x86/include/asm/checksum_32.h
+++ b/arch/x86/include/asm/checksum_32.h
@@ -161,7 +161,8 @@ static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 	    "adcl $0, %0	;\n"
 	    : "=&r" (sum)
 	    : "r" (saddr), "r" (daddr),
-	      "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+	      "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+	    : "memory");
 
 	return csum_fold(sum);
 }
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index 82ceb788a981..ee1931be6593 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -312,19 +312,23 @@ static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old,
 
 extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
 
-#define cmpxchg64(ptr, o, n)						\
-({									\
-	__typeof__(*(ptr)) __ret;					\
-	if (likely(boot_cpu_data.x86 > 4))				\
-		__ret = (__typeof__(*(ptr)))__cmpxchg64((ptr),		\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	else								\
-		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	__ret;								\
-})
+#define cmpxchg64(ptr, o, n)					\
+({								\
+	__typeof__(*(ptr)) __ret;				\
+	__typeof__(*(ptr)) __old = (o);				\
+	__typeof__(*(ptr)) __new = (n);				\
+	alternative_io("call cmpxchg8b_emu",			\
+			"lock; cmpxchg8b (%%esi)" ,		\
+		       X86_FEATURE_CX8,				\
+		       "=A" (__ret),				\
+		       "S" ((ptr)), "0" (__old),		\
+		       "b" ((unsigned int)__new),		\
+		       "c" ((unsigned int)(__new>>32))		\
+		       : "memory");				\
+	__ret; })
+
+
+
 #define cmpxchg64_local(ptr, o, n)					\
 ({									\
 	__typeof__(*(ptr)) __ret;					\
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 3be000435fad..d83892226f73 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -796,6 +796,7 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 #define KVM_ARCH_WANT_MMU_NOTIFIER
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_age_hva(struct kvm *kvm, unsigned long hva);
+void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
 int cpuid_maxphyaddr(struct kvm_vcpu *vcpu);
 int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu);
 int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index b608a64c5814..f1363b72364f 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -133,6 +133,8 @@ static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
 static inline void enable_p5_mce(void) {}
 #endif
 
+extern void (*x86_mce_decode_callback)(struct mce *m);
+
 void mce_setup(struct mce *m);
 void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, mce_dev);
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 8aebcc41041d..efb38994859c 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -840,42 +840,22 @@ static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock)
 
 static inline unsigned long __raw_local_save_flags(void)
 {
-	unsigned long f;
-
-	asm volatile(paravirt_alt(PARAVIRT_CALL)
-		     : "=a"(f)
-		     : paravirt_type(pv_irq_ops.save_fl),
-		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc");
-	return f;
+	return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl);
 }
 
 static inline void raw_local_irq_restore(unsigned long f)
 {
-	asm volatile(paravirt_alt(PARAVIRT_CALL)
-		     : "=a"(f)
-		     : PV_FLAGS_ARG(f),
-		       paravirt_type(pv_irq_ops.restore_fl),
-		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc");
+	PVOP_VCALLEE1(pv_irq_ops.restore_fl, f);
 }
 
 static inline void raw_local_irq_disable(void)
 {
-	asm volatile(paravirt_alt(PARAVIRT_CALL)
-		     :
-		     : paravirt_type(pv_irq_ops.irq_disable),
-		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc");
+	PVOP_VCALLEE0(pv_irq_ops.irq_disable);
 }
 
 static inline void raw_local_irq_enable(void)
 {
-	asm volatile(paravirt_alt(PARAVIRT_CALL)
-		     :
-		     : paravirt_type(pv_irq_ops.irq_enable),
-		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc");
+	PVOP_VCALLEE0(pv_irq_ops.irq_enable);
 }
 
 static inline unsigned long __raw_local_irq_save(void)
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index dd0f5b32489d..9357473c8da0 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -494,10 +494,11 @@ int paravirt_disable_iospace(void);
 #define EXTRA_CLOBBERS
 #define VEXTRA_CLOBBERS
 #else  /* CONFIG_X86_64 */
+/* [re]ax isn't an arg, but the return val */
 #define PVOP_VCALL_ARGS					\
 	unsigned long __edi = __edi, __esi = __esi,	\
-		__edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
+		__edx = __edx, __ecx = __ecx, __eax = __eax
+#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS
 
 #define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
 #define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
@@ -509,6 +510,7 @@ int paravirt_disable_iospace(void);
 				"=c" (__ecx)
 #define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
 
+/* void functions are still allowed [re]ax for scratch */
 #define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
 #define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
 
@@ -583,8 +585,8 @@ int paravirt_disable_iospace(void);
 		       VEXTRA_CLOBBERS,					\
 		       pre, post, ##__VA_ARGS__)
 
-#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+#define __PVOP_VCALLEESAVE(op, pre, post, ...)				\
+	____PVOP_VCALL(op.func, CLBR_RET_REG,				\
 		      PVOP_VCALLEE_CLOBBERS, ,				\
 		      pre, post, ##__VA_ARGS__)
 
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 25a92842dd99..d823c245f63b 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -143,6 +143,7 @@ extern unsigned long node_remap_size[];
 				| 1*SD_BALANCE_FORK			\
 				| 0*SD_BALANCE_WAKE			\
 				| 1*SD_WAKE_AFFINE			\
+				| 1*SD_PREFER_LOCAL			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_POWERSAVINGS_BALANCE		\
 				| 0*SD_SHARE_PKG_RESOURCES		\
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 04eb6c958b9d..d1414af98559 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -19,6 +19,8 @@
 #include <asm/types.h>
 #include <asm/percpu.h>
 #include <asm/uv/uv_mmrs.h>
+#include <asm/irq_vectors.h>
+#include <asm/io_apic.h>
 
 
 /*
@@ -114,7 +116,7 @@
 /*
  * The largest possible NASID of a C or M brick (+ 2)
  */
-#define UV_MAX_NASID_VALUE	(UV_MAX_NUMALINK_NODES * 2)
+#define UV_MAX_NASID_VALUE	(UV_MAX_NUMALINK_BLADES * 2)
 
 struct uv_scir_s {
 	struct timer_list timer;
@@ -230,6 +232,20 @@ static inline unsigned long uv_gpa(void *v)
 	return uv_soc_phys_ram_to_gpa(__pa(v));
 }
 
+/* gnode -> pnode */
+static inline unsigned long uv_gpa_to_gnode(unsigned long gpa)
+{
+	return gpa >> uv_hub_info->m_val;
+}
+
+/* gpa -> pnode */
+static inline int uv_gpa_to_pnode(unsigned long gpa)
+{
+	unsigned long n_mask = (1UL << uv_hub_info->n_val) - 1;
+
+	return uv_gpa_to_gnode(gpa) & n_mask;
+}
+
 /* pnode, offset --> socket virtual */
 static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
 {
@@ -421,9 +437,14 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
 static inline void uv_hub_send_ipi(int pnode, int apicid, int vector)
 {
 	unsigned long val;
+	unsigned long dmode = dest_Fixed;
+
+	if (vector == NMI_VECTOR)
+		dmode = dest_NMI;
 
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 			((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
+			(dmode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
 			(vector << UVH_IPI_INT_VECTOR_SHFT);
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
index 7da00b799cda..060fff8f5c5b 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -57,5 +57,8 @@ SECTIONS
 		*(.note*)
 	}
 
+	/*
+	 * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+	 */
 	. = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!");
 }
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index f5f5886a6b53..326c25477d3d 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -352,14 +352,14 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 
 	for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
 		alias.v = uv_read_local_mmr(redir_addrs[i].alias);
-		if (alias.s.base == 0) {
+		if (alias.s.enable && alias.s.base == 0) {
 			*size = (1UL << alias.s.m_alias);
 			redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
 			*base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
 			return;
 		}
 	}
-	BUG();
+	*base = *size = 0;
 }
 
 enum map_type {map_wb, map_uc};
@@ -619,12 +619,12 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
 		uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
 		uv_cpu_hub_info(cpu)->m_val = m_val;
-		uv_cpu_hub_info(cpu)->n_val = m_val;
+		uv_cpu_hub_info(cpu)->n_val = n_val;
 		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
 		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
 		uv_cpu_hub_info(cpu)->pnode = pnode;
 		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
-		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+		uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1;
 		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
 		uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
 		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 4b2af86e3e8d..721a77ca8115 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -85,6 +85,18 @@ static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
 static DEFINE_PER_CPU(struct mce, mces_seen);
 static int			cpu_missing;
 
+static void default_decode_mce(struct mce *m)
+{
+	pr_emerg("No human readable MCE decoding support on this CPU type.\n");
+	pr_emerg("Run the message through 'mcelog --ascii' to decode.\n");
+}
+
+/*
+ * CPU/chipset specific EDAC code can register a callback here to print
+ * MCE errors in a human-readable form:
+ */
+void (*x86_mce_decode_callback)(struct mce *m) = default_decode_mce;
+EXPORT_SYMBOL(x86_mce_decode_callback);
 
 /* MCA banks polled by the period polling timer for corrected events */
 DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
@@ -165,49 +177,46 @@ void mce_log(struct mce *mce)
 	set_bit(0, &mce_need_notify);
 }
 
-void __weak decode_mce(struct mce *m)
-{
-	return;
-}
-
 static void print_mce(struct mce *m)
 {
-	printk(KERN_EMERG
-	       "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
+	pr_emerg("CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
 	       m->extcpu, m->mcgstatus, m->bank, m->status);
+
 	if (m->ip) {
-		printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
-		       !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
-		       m->cs, m->ip);
+		pr_emerg("RIP%s %02x:<%016Lx> ",
+			!(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
+				m->cs, m->ip);
+
 		if (m->cs == __KERNEL_CS)
 			print_symbol("{%s}", m->ip);
-		printk(KERN_CONT "\n");
+		pr_cont("\n");
 	}
-	printk(KERN_EMERG "TSC %llx ", m->tsc);
+
+	pr_emerg("TSC %llx ", m->tsc);
 	if (m->addr)
-		printk(KERN_CONT "ADDR %llx ", m->addr);
+		pr_cont("ADDR %llx ", m->addr);
 	if (m->misc)
-		printk(KERN_CONT "MISC %llx ", m->misc);
-	printk(KERN_CONT "\n");
-	printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
-			m->cpuvendor, m->cpuid, m->time, m->socketid,
-			m->apicid);
+		pr_cont("MISC %llx ", m->misc);
+
+	pr_cont("\n");
+	pr_emerg("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+		m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid);
 
-	decode_mce(m);
+	/*
+	 * Print out human-readable details about the MCE error,
+	 * (if the CPU has an implementation for that):
+	 */
+	x86_mce_decode_callback(m);
 }
 
 static void print_mce_head(void)
 {
-	printk(KERN_EMERG "\nHARDWARE ERROR\n");
+	pr_emerg("\nHARDWARE ERROR\n");
 }
 
 static void print_mce_tail(void)
 {
-	printk(KERN_EMERG "This is not a software problem!\n"
-#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD))
-	       "Run through mcelog --ascii to decode and contact your hardware vendor\n"
-#endif
-	       );
+	pr_emerg("This is not a software problem!\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -221,6 +230,7 @@ static atomic_t mce_fake_paniced;
 static void wait_for_panic(void)
 {
 	long timeout = PANIC_TIMEOUT*USEC_PER_SEC;
+
 	preempt_disable();
 	local_irq_enable();
 	while (timeout-- > 0)
@@ -288,6 +298,7 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 static int msr_to_offset(u32 msr)
 {
 	unsigned bank = __get_cpu_var(injectm.bank);
+
 	if (msr == rip_msr)
 		return offsetof(struct mce, ip);
 	if (msr == MSR_IA32_MCx_STATUS(bank))
@@ -1203,7 +1214,8 @@ static int __cpuinit mce_cap_init(void)
 	rdmsrl(MSR_IA32_MCG_CAP, cap);
 
 	b = cap & MCG_BANKCNT_MASK;
-	printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+	if (!banks)
+		printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
 
 	if (b > MAX_NR_BANKS) {
 		printk(KERN_WARNING
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 889f665fe93d..7c785634af2b 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -8,6 +8,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
+#include <linux/sched.h>
 #include <asm/apic.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index f04e72527604..3c1b12d461d1 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -96,17 +96,24 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 	unsigned long long base, size;
 	char *ptr;
 	char line[LINE_SIZE];
+	int length;
 	size_t linelen;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
-	if (!len)
-		return -EINVAL;
 
 	memset(line, 0, LINE_SIZE);
-	if (len > LINE_SIZE)
-		len = LINE_SIZE;
-	if (copy_from_user(line, buf, len - 1))
+
+	length = len;
+	length--;
+
+	if (length > LINE_SIZE - 1)
+		length = LINE_SIZE - 1;
+
+	if (length < 0)
+		return -EINVAL;
+
+	if (copy_from_user(line, buf, length))
 		return -EFAULT;
 
 	linelen = strlen(line);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 85419bb7d4ab..d17d482a04f4 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1378,8 +1378,8 @@ static unsigned long ram_alignment(resource_size_t pos)
 	if (mb < 16)
 		return 1024*1024;
 
-	/* To 32MB for anything above that */
-	return 32*1024*1024;
+	/* To 64MB for anything above that */
+	return 64*1024*1024;
 }
 
 #define MAX_RESOURCE_SIZE ((resource_size_t)-1)
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 41fd965c80c6..b9c830c12b4a 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -206,8 +206,11 @@ static int __init setup_early_printk(char *buf)
 
 	while (*buf != '\0') {
 		if (!strncmp(buf, "serial", 6)) {
-			early_serial_init(buf + 6);
+			buf += 6;
+			early_serial_init(buf);
 			early_console_register(&early_serial_console, keep);
+			if (!strncmp(buf, ",ttyS", 5))
+				buf += 5;
 		}
 		if (!strncmp(buf, "ttyS", 4)) {
 			early_serial_init(buf + 4);
diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c
index 43cec6bdda63..9c3bd4a2050e 100644
--- a/arch/x86/kernel/i386_ksyms_32.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
@@ -10,6 +10,16 @@
 EXPORT_SYMBOL(mcount);
 #endif
 
+/*
+ * Note, this is a prototype to get at the symbol for
+ * the export, but dont use it from C code, it is used
+ * by assembly code and is not using C calling convention!
+ */
+#ifndef CONFIG_X86_CMPXCHG64
+extern void cmpxchg8b_emu(void);
+EXPORT_SYMBOL(cmpxchg8b_emu);
+#endif
+
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_partial_copy_generic);
 
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 74656d1d4e30..04bbd5278568 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -63,10 +63,10 @@ static int show_other_interrupts(struct seq_file *p, int prec)
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_spurious_count);
 	seq_printf(p, "  Spurious interrupts\n");
-	seq_printf(p, "%*s: ", prec, "CNT");
+	seq_printf(p, "%*s: ", prec, "PMI");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->apic_perf_irqs);
-	seq_printf(p, "  Performance counter interrupts\n");
+	seq_printf(p, "  Performance monitoring interrupts\n");
 	seq_printf(p, "%*s: ", prec, "PND");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->apic_pending_irqs);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 64b838eac18c..b2a71dca5642 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -35,7 +35,7 @@ int iommu_detected __read_mostly = 0;
 
 /*
  * This variable becomes 1 if iommu=pt is passed on the kernel command line.
- * If this variable is 1, IOMMU implementations do no DMA ranslation for
+ * If this variable is 1, IOMMU implementations do no DMA translation for
  * devices and allow every device to access to whole physical memory. This is
  * useful if a user want to use an IOMMU only for KVM device assignment to
  * guests and not for driver dma translation.
@@ -311,7 +311,7 @@ void pci_iommu_shutdown(void)
 	amd_iommu_shutdown();
 }
 /* Must execute after PCI subsystem */
-fs_initcall(pci_iommu_init);
+rootfs_initcall(pci_iommu_init);
 
 #ifdef CONFIG_PCI
 /* Many VIA bridges seem to corrupt data for DAC. Disable it here */
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 98a827ee9ed7..a7f1b64f86e0 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -16,6 +16,7 @@
 #include <linux/agp_backend.h>
 #include <linux/init.h>
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/spinlock.h>
 #include <linux/pci.h>
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 27349f92a6d7..a1a3cdda06e1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -4,6 +4,7 @@
 #include <linux/pm.h>
 #include <linux/efi.h>
 #include <linux/dmi.h>
+#include <linux/sched.h>
 #include <linux/tboot.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index dcb00d278512..be2573448ed9 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -38,7 +38,8 @@ unsigned long profile_pc(struct pt_regs *regs)
 #ifdef CONFIG_FRAME_POINTER
 		return *(unsigned long *)(regs->bp + sizeof(long));
 #else
-		unsigned long *sp = (unsigned long *)regs->sp;
+		unsigned long *sp =
+			(unsigned long *)kernel_stack_pointer(regs);
 		/*
 		 * Return address is either directly at stack pointer
 		 * or above a saved flags. Eflags has bits 22-31 zero,
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 503c1f2e8835..1740c85e24bb 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -23,8 +23,6 @@
 static struct bau_control	**uv_bau_table_bases __read_mostly;
 static int			uv_bau_retry_limit __read_mostly;
 
-/* position of pnode (which is nasid>>1): */
-static int			uv_nshift __read_mostly;
 /* base pnode in this partition */
 static int			uv_partition_base_pnode __read_mostly;
 
@@ -723,7 +721,7 @@ uv_activation_descriptor_init(int node, int pnode)
 	BUG_ON(!adp);
 
 	pa = uv_gpa(adp); /* need the real nasid*/
-	n = pa >> uv_nshift;
+	n = uv_gpa_to_pnode(pa);
 	m = pa & uv_mmask;
 
 	uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
@@ -778,7 +776,7 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
 	 * need the pnode of where the memory was really allocated
 	 */
 	pa = uv_gpa(pqp);
-	pn = pa >> uv_nshift;
+	pn = uv_gpa_to_pnode(pa);
 	uv_write_global_mmr64(pnode,
 			      UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
 			      ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
@@ -843,8 +841,7 @@ static int __init uv_bau_init(void)
 				       GFP_KERNEL, cpu_to_node(cur_cpu));
 
 	uv_bau_retry_limit = 1;
-	uv_nshift = uv_hub_info->n_val;
-	uv_mmask = (1UL << uv_hub_info->n_val) - 1;
+	uv_mmask = (1UL << uv_hub_info->m_val) - 1;
 	nblades = uv_num_possible_blades();
 
 	uv_bau_table_bases = (struct bau_control **)
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index 699f7eeb896a..cd022121cab6 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -3,8 +3,16 @@
 #include <asm/trampoline.h>
 #include <asm/e820.h>
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_ACPI_SLEEP)
+#define __trampinit
+#define __trampinitdata
+#else
+#define __trampinit __cpuinit
+#define __trampinitdata __cpuinitdata
+#endif
+
 /* ready for x86_64 and x86 */
-unsigned char *__cpuinitdata trampoline_base = __va(TRAMPOLINE_BASE);
+unsigned char *__trampinitdata trampoline_base = __va(TRAMPOLINE_BASE);
 
 void __init reserve_trampoline_memory(void)
 {
@@ -26,7 +34,7 @@ void __init reserve_trampoline_memory(void)
  * bootstrap into the page concerned. The caller
  * has made sure it's suitably aligned.
  */
-unsigned long __cpuinit setup_trampoline(void)
+unsigned long __trampinit setup_trampoline(void)
 {
 	memcpy(trampoline_base, trampoline_data, TRAMPOLINE_SIZE);
 	return virt_to_phys(trampoline_base);
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
index 596d54c660a5..3af2dff58b21 100644
--- a/arch/x86/kernel/trampoline_64.S
+++ b/arch/x86/kernel/trampoline_64.S
@@ -32,8 +32,12 @@
 #include <asm/segment.h>
 #include <asm/processor-flags.h>
 
+#ifdef CONFIG_ACPI_SLEEP
+.section .rodata, "a", @progbits
+#else
 /* We can free up the trampoline after bootup if cpu hotplug is not supported. */
 __CPUINITRODATA
+#endif
 .code16
 
 ENTRY(trampoline_data)
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 31e6f6cfe53e..d430e4c30193 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -648,7 +648,7 @@ static inline int __init activate_vmi(void)
 
 	pv_info.paravirt_enabled = 1;
 	pv_info.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK;
-	pv_info.name = "vmi";
+	pv_info.name = "vmi [deprecated]";
 
 	pv_init_ops.patch = vmi_patch;
 
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 92929fb3f9fa..3c68fe2d46cf 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -305,6 +305,9 @@ SECTIONS
 
 
 #ifdef CONFIG_X86_32
+/*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
 . = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
 	   "kernel image bigger than KERNEL_IMAGE_SIZE");
 #else
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 82ad523b4901..144e7f60b5e2 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -116,7 +116,7 @@ static s64 __kpit_elapsed(struct kvm *kvm)
 	 * itself with the initial count and continues counting
 	 * from there.
 	 */
-	remaining = hrtimer_expires_remaining(&ps->pit_timer.timer);
+	remaining = hrtimer_get_remaining(&ps->pit_timer.timer);
 	elapsed = ps->pit_timer.period - ktime_to_ns(remaining);
 	elapsed = mod_64(elapsed, ps->pit_timer.period);
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 1ae5ceba7eb2..23c217692ea9 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -521,7 +521,7 @@ static u32 apic_get_tmcct(struct kvm_lapic *apic)
 	if (apic_get_reg(apic, APIC_TMICT) == 0)
 		return 0;
 
-	remaining = hrtimer_expires_remaining(&apic->lapic_timer.timer);
+	remaining = hrtimer_get_remaining(&apic->lapic_timer.timer);
 	if (ktime_to_ns(remaining) < 0)
 		remaining = ktime_set(0, 0);
 
@@ -664,7 +664,7 @@ static void start_apic_timer(struct kvm_lapic *apic)
 {
 	ktime_t now = apic->lapic_timer.timer.base->get_time();
 
-	apic->lapic_timer.period = apic_get_reg(apic, APIC_TMICT) *
+	apic->lapic_timer.period = (u64)apic_get_reg(apic, APIC_TMICT) *
 		    APIC_BUS_CYCLE_NS * apic->divide_count;
 	atomic_set(&apic->lapic_timer.pending, 0);
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index eca41ae9f453..818b92ad82cf 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -156,6 +156,8 @@ module_param(oos_shadow, bool, 0644);
 #define CREATE_TRACE_POINTS
 #include "mmutrace.h"
 
+#define SPTE_HOST_WRITEABLE (1ULL << PT_FIRST_AVAIL_BITS_SHIFT)
+
 #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
 
 struct kvm_rmap_desc {
@@ -634,9 +636,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 	if (*spte & shadow_accessed_mask)
 		kvm_set_pfn_accessed(pfn);
 	if (is_writeble_pte(*spte))
-		kvm_release_pfn_dirty(pfn);
-	else
-		kvm_release_pfn_clean(pfn);
+		kvm_set_pfn_dirty(pfn);
 	rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], sp->role.level);
 	if (!*rmapp) {
 		printk(KERN_ERR "rmap_remove: %p %llx 0->BUG\n", spte, *spte);
@@ -748,7 +748,8 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 	return write_protected;
 }
 
-static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
+static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp,
+			   unsigned long data)
 {
 	u64 *spte;
 	int need_tlb_flush = 0;
@@ -763,8 +764,47 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
 	return need_tlb_flush;
 }
 
+static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
+			     unsigned long data)
+{
+	int need_flush = 0;
+	u64 *spte, new_spte;
+	pte_t *ptep = (pte_t *)data;
+	pfn_t new_pfn;
+
+	WARN_ON(pte_huge(*ptep));
+	new_pfn = pte_pfn(*ptep);
+	spte = rmap_next(kvm, rmapp, NULL);
+	while (spte) {
+		BUG_ON(!is_shadow_present_pte(*spte));
+		rmap_printk("kvm_set_pte_rmapp: spte %p %llx\n", spte, *spte);
+		need_flush = 1;
+		if (pte_write(*ptep)) {
+			rmap_remove(kvm, spte);
+			__set_spte(spte, shadow_trap_nonpresent_pte);
+			spte = rmap_next(kvm, rmapp, NULL);
+		} else {
+			new_spte = *spte &~ (PT64_BASE_ADDR_MASK);
+			new_spte |= (u64)new_pfn << PAGE_SHIFT;
+
+			new_spte &= ~PT_WRITABLE_MASK;
+			new_spte &= ~SPTE_HOST_WRITEABLE;
+			if (is_writeble_pte(*spte))
+				kvm_set_pfn_dirty(spte_to_pfn(*spte));
+			__set_spte(spte, new_spte);
+			spte = rmap_next(kvm, rmapp, spte);
+		}
+	}
+	if (need_flush)
+		kvm_flush_remote_tlbs(kvm);
+
+	return 0;
+}
+
 static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
-			  int (*handler)(struct kvm *kvm, unsigned long *rmapp))
+			  unsigned long data,
+			  int (*handler)(struct kvm *kvm, unsigned long *rmapp,
+					 unsigned long data))
 {
 	int i, j;
 	int retval = 0;
@@ -786,13 +826,15 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 		if (hva >= start && hva < end) {
 			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
 
-			retval |= handler(kvm, &memslot->rmap[gfn_offset]);
+			retval |= handler(kvm, &memslot->rmap[gfn_offset],
+					  data);
 
 			for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) {
 				int idx = gfn_offset;
 				idx /= KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL + j);
 				retval |= handler(kvm,
-					&memslot->lpage_info[j][idx].rmap_pde);
+					&memslot->lpage_info[j][idx].rmap_pde,
+					data);
 			}
 		}
 	}
@@ -802,10 +844,16 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
 {
-	return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp);
+	return kvm_handle_hva(kvm, hva, 0, kvm_unmap_rmapp);
 }
 
-static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
+void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte)
+{
+	kvm_handle_hva(kvm, hva, (unsigned long)&pte, kvm_set_pte_rmapp);
+}
+
+static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
+			 unsigned long data)
 {
 	u64 *spte;
 	int young = 0;
@@ -841,13 +889,13 @@ static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 	gfn = unalias_gfn(vcpu->kvm, gfn);
 	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
 
-	kvm_unmap_rmapp(vcpu->kvm, rmapp);
+	kvm_unmap_rmapp(vcpu->kvm, rmapp, 0);
 	kvm_flush_remote_tlbs(vcpu->kvm);
 }
 
 int kvm_age_hva(struct kvm *kvm, unsigned long hva)
 {
-	return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
+	return kvm_handle_hva(kvm, hva, 0, kvm_age_rmapp);
 }
 
 #ifdef MMU_DEBUG
@@ -1756,7 +1804,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		    unsigned pte_access, int user_fault,
 		    int write_fault, int dirty, int level,
 		    gfn_t gfn, pfn_t pfn, bool speculative,
-		    bool can_unsync)
+		    bool can_unsync, bool reset_host_protection)
 {
 	u64 spte;
 	int ret = 0;
@@ -1783,6 +1831,9 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
 			kvm_is_mmio_pfn(pfn));
 
+	if (reset_host_protection)
+		spte |= SPTE_HOST_WRITEABLE;
+
 	spte |= (u64)pfn << PAGE_SHIFT;
 
 	if ((pte_access & ACC_WRITE_MASK)
@@ -1828,7 +1879,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 			 unsigned pt_access, unsigned pte_access,
 			 int user_fault, int write_fault, int dirty,
 			 int *ptwrite, int level, gfn_t gfn,
-			 pfn_t pfn, bool speculative)
+			 pfn_t pfn, bool speculative,
+			 bool reset_host_protection)
 {
 	int was_rmapped = 0;
 	int was_writeble = is_writeble_pte(*sptep);
@@ -1860,7 +1912,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	}
 
 	if (set_spte(vcpu, sptep, pte_access, user_fault, write_fault,
-		      dirty, level, gfn, pfn, speculative, true)) {
+		      dirty, level, gfn, pfn, speculative, true,
+		      reset_host_protection)) {
 		if (write_fault)
 			*ptwrite = 1;
 		kvm_x86_ops->tlb_flush(vcpu);
@@ -1877,8 +1930,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	page_header_update_slot(vcpu->kvm, sptep, gfn);
 	if (!was_rmapped) {
 		rmap_count = rmap_add(vcpu, sptep, gfn);
-		if (!is_rmap_spte(*sptep))
-			kvm_release_pfn_clean(pfn);
+		kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
 			rmap_recycle(vcpu, sptep, gfn);
 	} else {
@@ -1909,7 +1961,7 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 		if (iterator.level == level) {
 			mmu_set_spte(vcpu, iterator.sptep, ACC_ALL, ACC_ALL,
 				     0, write, 1, &pt_write,
-				     level, gfn, pfn, false);
+				     level, gfn, pfn, false, true);
 			++vcpu->stat.pf_fixed;
 			break;
 		}
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index d2fec9c12d22..72558f8ff3f5 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -273,9 +273,13 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq))
 		return;
 	kvm_get_pfn(pfn);
+	/*
+	 * we call mmu_set_spte() with reset_host_protection = true beacuse that
+	 * vcpu->arch.update_pte.pfn was fetched from get_user_pages(write = 1).
+	 */
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
 		     gpte & PT_DIRTY_MASK, NULL, PT_PAGE_TABLE_LEVEL,
-		     gpte_to_gfn(gpte), pfn, true);
+		     gpte_to_gfn(gpte), pfn, true, true);
 }
 
 /*
@@ -308,7 +312,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 				     user_fault, write_fault,
 				     gw->ptes[gw->level-1] & PT_DIRTY_MASK,
 				     ptwrite, level,
-				     gw->gfn, pfn, false);
+				     gw->gfn, pfn, false, true);
 			break;
 		}
 
@@ -558,6 +562,7 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 {
 	int i, offset, nr_present;
+	bool reset_host_protection;
 
 	offset = nr_present = 0;
 
@@ -595,9 +600,16 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 
 		nr_present++;
 		pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
+		if (!(sp->spt[i] & SPTE_HOST_WRITEABLE)) {
+			pte_access &= ~ACC_WRITE_MASK;
+			reset_host_protection = 0;
+		} else {
+			reset_host_protection = 1;
+		}
 		set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
 			 is_dirty_gpte(gpte), PT_PAGE_TABLE_LEVEL, gfn,
-			 spte_to_pfn(sp->spt[i]), true, false);
+			 spte_to_pfn(sp->spt[i]), true, false,
+			 reset_host_protection);
 	}
 
 	return !nr_present;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 944cc9c04b3c..c17404add91f 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -767,6 +767,8 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		rdtscll(tsc_this);
 		delta = vcpu->arch.host_tsc - tsc_this;
 		svm->vmcb->control.tsc_offset += delta;
+		if (is_nested(svm))
+			svm->nested.hsave->control.tsc_offset += delta;
 		vcpu->cpu = cpu;
 		kvm_migrate_timers(vcpu);
 		svm->asid_generation = 0;
@@ -2057,10 +2059,14 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 
 	switch (ecx) {
 	case MSR_IA32_TSC: {
-		u64 tsc;
+		u64 tsc_offset;
+
+		if (is_nested(svm))
+			tsc_offset = svm->nested.hsave->control.tsc_offset;
+		else
+			tsc_offset = svm->vmcb->control.tsc_offset;
 
-		rdtscll(tsc);
-		*data = svm->vmcb->control.tsc_offset + tsc;
+		*data = tsc_offset + native_read_tsc();
 		break;
 	}
 	case MSR_K6_STAR:
@@ -2146,10 +2152,17 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 
 	switch (ecx) {
 	case MSR_IA32_TSC: {
-		u64 tsc;
+		u64 tsc_offset = data - native_read_tsc();
+		u64 g_tsc_offset = 0;
+
+		if (is_nested(svm)) {
+			g_tsc_offset = svm->vmcb->control.tsc_offset -
+				       svm->nested.hsave->control.tsc_offset;
+			svm->nested.hsave->control.tsc_offset = tsc_offset;
+		}
+
+		svm->vmcb->control.tsc_offset = tsc_offset + g_tsc_offset;
 
-		rdtscll(tsc);
-		svm->vmcb->control.tsc_offset = data - tsc;
 		break;
 	}
 	case MSR_K6_STAR:
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f3812014bd0b..ed53b42caba1 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -709,7 +709,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	if (vcpu->cpu != cpu) {
 		vcpu_clear(vmx);
 		kvm_migrate_timers(vcpu);
-		vpid_sync_vcpu_all(vmx);
+		set_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests);
 		local_irq_disable();
 		list_add(&vmx->local_vcpus_link,
 			 &per_cpu(vcpus_on_cpu, cpu));
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index be451ee44249..9b9695322f56 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1591,6 +1591,8 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 
 	if (cpuid->nent < 1)
 		goto out;
+	if (cpuid->nent > KVM_MAX_CPUID_ENTRIES)
+		cpuid->nent = KVM_MAX_CPUID_ENTRIES;
 	r = -ENOMEM;
 	cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry2) * cpuid->nent);
 	if (!cpuid_entries)
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 9e609206fac9..85f5db95c60f 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -16,7 +16,9 @@ ifeq ($(CONFIG_X86_32),y)
         lib-y += checksum_32.o
         lib-y += strstr_32.o
         lib-y += semaphore_32.o string_32.o
-
+ifneq ($(CONFIG_X86_CMPXCHG64),y)
+        lib-y += cmpxchg8b_emu.o
+endif
         lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
 else
         obj-y += io_64.o iomap_copy_64.o
diff --git a/arch/x86/lib/cmpxchg8b_emu.S b/arch/x86/lib/cmpxchg8b_emu.S
new file mode 100644
index 000000000000..828cb710dec2
--- /dev/null
+++ b/arch/x86/lib/cmpxchg8b_emu.S
@@ -0,0 +1,57 @@
+/*
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; version 2
+ *	of the License.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative-asm.h>
+#include <asm/frame.h>
+#include <asm/dwarf2.h>
+
+
+.text
+
+/*
+ * Inputs:
+ * %esi : memory location to compare
+ * %eax : low 32 bits of old value
+ * %edx : high 32 bits of old value
+ * %ebx : low 32 bits of new value
+ * %ecx : high 32 bits of new value
+ */
+ENTRY(cmpxchg8b_emu)
+CFI_STARTPROC
+
+#
+# Emulate 'cmpxchg8b (%esi)' on UP except we don't
+# set the whole ZF thing (caller will just compare
+# eax:edx with the expected value)
+#
+cmpxchg8b_emu:
+	pushfl
+	cli
+
+	cmpl  (%esi), %eax
+	jne not_same
+	cmpl 4(%esi), %edx
+	jne half_same
+
+	movl %ebx,  (%esi)
+	movl %ecx, 4(%esi)
+
+	popfl
+	ret
+
+ not_same:
+	movl  (%esi), %eax
+ half_same:
+	movl 4(%esi), %edx
+
+	popfl
+	ret
+
+CFI_ENDPROC
+ENDPROC(cmpxchg8b_emu)
diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c
index b53225d2cac3..e133ce25e290 100644
--- a/arch/x86/xen/debugfs.c
+++ b/arch/x86/xen/debugfs.c
@@ -100,7 +100,7 @@ static int xen_array_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct file_operations u32_array_fops = {
+static const struct file_operations u32_array_fops = {
 	.owner	= THIS_MODULE,
 	.open	= u32_array_open,
 	.release= xen_array_release,
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 19085ff0484a..19f7df30937f 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/clocksource.h>
 #include <linux/interrupt.h>
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 6593ab39cfe9..8873b9b439ff 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -350,6 +350,7 @@ static void blkdev_discard_end_io(struct bio *bio, int err)
 
 	if (bio->bi_private)
 		complete(bio->bi_private);
+	__free_page(bio_page(bio));
 
 	bio_put(bio);
 }
@@ -372,30 +373,50 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 	struct request_queue *q = bdev_get_queue(bdev);
 	int type = flags & DISCARD_FL_BARRIER ?
 		DISCARD_BARRIER : DISCARD_NOBARRIER;
+	struct bio *bio;
+	struct page *page;
 	int ret = 0;
 
 	if (!q)
 		return -ENXIO;
 
-	if (!q->prepare_discard_fn)
+	if (!blk_queue_discard(q))
 		return -EOPNOTSUPP;
 
 	while (nr_sects && !ret) {
-		struct bio *bio = bio_alloc(gfp_mask, 0);
-		if (!bio)
-			return -ENOMEM;
+		unsigned int sector_size = q->limits.logical_block_size;
+		unsigned int max_discard_sectors =
+			min(q->limits.max_discard_sectors, UINT_MAX >> 9);
 
+		bio = bio_alloc(gfp_mask, 1);
+		if (!bio)
+			goto out;
+		bio->bi_sector = sector;
 		bio->bi_end_io = blkdev_discard_end_io;
 		bio->bi_bdev = bdev;
 		if (flags & DISCARD_FL_WAIT)
 			bio->bi_private = &wait;
 
-		bio->bi_sector = sector;
+		/*
+		 * Add a zeroed one-sector payload as that's what
+		 * our current implementations need.  If we'll ever need
+		 * more the interface will need revisiting.
+		 */
+		page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+		if (!page)
+			goto out_free_bio;
+		if (bio_add_pc_page(q, bio, page, sector_size, 0) < sector_size)
+			goto out_free_page;
 
-		if (nr_sects > queue_max_hw_sectors(q)) {
-			bio->bi_size = queue_max_hw_sectors(q) << 9;
-			nr_sects -= queue_max_hw_sectors(q);
-			sector += queue_max_hw_sectors(q);
+		/*
+		 * And override the bio size - the way discard works we
+		 * touch many more blocks on disk than the actual payload
+		 * length.
+		 */
+		if (nr_sects > max_discard_sectors) {
+			bio->bi_size = max_discard_sectors << 9;
+			nr_sects -= max_discard_sectors;
+			sector += max_discard_sectors;
 		} else {
 			bio->bi_size = nr_sects << 9;
 			nr_sects = 0;
@@ -414,5 +435,11 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 		bio_put(bio);
 	}
 	return ret;
+out_free_page:
+	__free_page(page);
+out_free_bio:
+	bio_put(bio);
+out:
+	return -ENOMEM;
 }
 EXPORT_SYMBOL(blkdev_issue_discard);
diff --git a/block/blk-core.c b/block/blk-core.c
index 8135228e4b29..71da5111120c 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -34,6 +34,7 @@
 #include "blk.h"
 
 EXPORT_TRACEPOINT_SYMBOL_GPL(block_remap);
+EXPORT_TRACEPOINT_SYMBOL_GPL(block_rq_remap);
 EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_complete);
 
 static int __make_request(struct request_queue *q, struct bio *bio);
@@ -1029,7 +1030,7 @@ static void part_round_stats_single(int cpu, struct hd_struct *part,
 	if (now == part->stamp)
 		return;
 
-	if (part->in_flight) {
+	if (part_in_flight(part)) {
 		__part_stat_add(cpu, part, time_in_queue,
 				part_in_flight(part) * (now - part->stamp));
 		__part_stat_add(cpu, part, io_ticks, (now - part->stamp));
@@ -1124,7 +1125,6 @@ void init_request_from_bio(struct request *req, struct bio *bio)
 		req->cmd_flags |= REQ_DISCARD;
 		if (bio_rw_flagged(bio, BIO_RW_BARRIER))
 			req->cmd_flags |= REQ_SOFTBARRIER;
-		req->q->prepare_discard_fn(req->q, req);
 	} else if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER)))
 		req->cmd_flags |= REQ_HARDBARRIER;
 
@@ -1161,7 +1161,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 	const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK;
 	int rw_flags;
 
-	if (bio_rw_flagged(bio, BIO_RW_BARRIER) && bio_has_data(bio) &&
+	if (bio_rw_flagged(bio, BIO_RW_BARRIER) &&
 	    (q->next_ordered == QUEUE_ORDERED_NONE)) {
 		bio_endio(bio, -EOPNOTSUPP);
 		return 0;
@@ -1437,7 +1437,8 @@ static inline void __generic_make_request(struct bio *bio)
 			goto end_io;
 		}
 
-		if (unlikely(nr_sectors > queue_max_hw_sectors(q))) {
+		if (unlikely(!bio_rw_flagged(bio, BIO_RW_DISCARD) &&
+			     nr_sectors > queue_max_hw_sectors(q))) {
 			printk(KERN_ERR "bio too big device %s (%u > %u)\n",
 			       bdevname(bio->bi_bdev, b),
 			       bio_sectors(bio),
@@ -1470,7 +1471,7 @@ static inline void __generic_make_request(struct bio *bio)
 			goto end_io;
 
 		if (bio_rw_flagged(bio, BIO_RW_DISCARD) &&
-		    !q->prepare_discard_fn) {
+		    !blk_queue_discard(q)) {
 			err = -EOPNOTSUPP;
 			goto end_io;
 		}
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 83413ff83739..66d4aa8799b7 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -34,23 +34,6 @@ void blk_queue_prep_rq(struct request_queue *q, prep_rq_fn *pfn)
 EXPORT_SYMBOL(blk_queue_prep_rq);
 
 /**
- * blk_queue_set_discard - set a discard_sectors function for queue
- * @q:		queue
- * @dfn:	prepare_discard function
- *
- * It's possible for a queue to register a discard callback which is used
- * to transform a discard request into the appropriate type for the
- * hardware. If none is registered, then discard requests are failed
- * with %EOPNOTSUPP.
- *
- */
-void blk_queue_set_discard(struct request_queue *q, prepare_discard_fn *dfn)
-{
-	q->prepare_discard_fn = dfn;
-}
-EXPORT_SYMBOL(blk_queue_set_discard);
-
-/**
  * blk_queue_merge_bvec - set a merge_bvec function for queue
  * @q:		queue
  * @mbfn:	merge_bvec_fn
@@ -111,7 +94,9 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->max_hw_segments = MAX_HW_SEGMENTS;
 	lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
 	lim->max_segment_size = MAX_SEGMENT_SIZE;
-	lim->max_sectors = lim->max_hw_sectors = SAFE_MAX_SECTORS;
+	lim->max_sectors = BLK_DEF_MAX_SECTORS;
+	lim->max_hw_sectors = INT_MAX;
+	lim->max_discard_sectors = SAFE_MAX_SECTORS;
 	lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
 	lim->bounce_pfn = (unsigned long)(BLK_BOUNCE_ANY >> PAGE_SHIFT);
 	lim->alignment_offset = 0;
@@ -164,6 +149,7 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	q->unplug_timer.data = (unsigned long)q;
 
 	blk_set_default_limits(&q->limits);
+	blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
 
 	/*
 	 * If the caller didn't supply a lock, fall back to our embedded
@@ -254,6 +240,18 @@ void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_sectors)
 EXPORT_SYMBOL(blk_queue_max_hw_sectors);
 
 /**
+ * blk_queue_max_discard_sectors - set max sectors for a single discard
+ * @q:  the request queue for the device
+ * @max_discard_sectors: maximum number of sectors to discard
+ **/
+void blk_queue_max_discard_sectors(struct request_queue *q,
+		unsigned int max_discard_sectors)
+{
+	q->limits.max_discard_sectors = max_discard_sectors;
+}
+EXPORT_SYMBOL(blk_queue_max_discard_sectors);
+
+/**
  * blk_queue_max_phys_segments - set max phys segments for a request for this queue
  * @q:  the request queue for the device
  * @max_segments:  max number of segments
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index b78c9c3e2670..8a6d81afb284 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -452,6 +452,7 @@ int blk_register_queue(struct gendisk *disk)
 	if (ret) {
 		kobject_uevent(&q->kobj, KOBJ_REMOVE);
 		kobject_del(&q->kobj);
+		blk_trace_remove_sysfs(disk_to_dev(disk));
 		return ret;
 	}
 
@@ -465,11 +466,11 @@ void blk_unregister_queue(struct gendisk *disk)
 	if (WARN_ON(!q))
 		return;
 
-	if (q->request_fn) {
+	if (q->request_fn)
 		elv_unregister_queue(q);
 
-		kobject_uevent(&q->kobj, KOBJ_REMOVE);
-		kobject_del(&q->kobj);
-		kobject_put(&disk_to_dev(disk)->kobj);
-	}
+	kobject_uevent(&q->kobj, KOBJ_REMOVE);
+	kobject_del(&q->kobj);
+	blk_trace_remove_sysfs(disk_to_dev(disk));
+	kobject_put(&disk_to_dev(disk)->kobj);
 }
diff --git a/block/blk-tag.c b/block/blk-tag.c
index 2e5cfeb59333..6b0f52c20964 100644
--- a/block/blk-tag.c
+++ b/block/blk-tag.c
@@ -359,7 +359,7 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq)
 		max_depth -= 2;
 		if (!max_depth)
 			max_depth = 1;
-		if (q->in_flight[0] > max_depth)
+		if (q->in_flight[BLK_RW_ASYNC] > max_depth)
 			return 1;
 	}
 
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 1ca813b16e78..069a61017c02 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -173,6 +173,7 @@ struct cfq_data {
 	unsigned int cfq_slice[2];
 	unsigned int cfq_slice_async_rq;
 	unsigned int cfq_slice_idle;
+	unsigned int cfq_latency;
 
 	struct list_head cic_list;
 
@@ -180,6 +181,8 @@ struct cfq_data {
 	 * Fallback dummy cfqq for extreme OOM conditions
 	 */
 	struct cfq_queue oom_cfqq;
+
+	unsigned long last_end_sync_rq;
 };
 
 enum cfqq_state_flags {
@@ -227,7 +230,7 @@ CFQ_CFQQ_FNS(coop);
 	blk_add_trace_msg((cfqd)->queue, "cfq " fmt, ##args)
 
 static void cfq_dispatch_insert(struct request_queue *, struct request *);
-static struct cfq_queue *cfq_get_queue(struct cfq_data *, int,
+static struct cfq_queue *cfq_get_queue(struct cfq_data *, bool,
 				       struct io_context *, gfp_t);
 static struct cfq_io_context *cfq_cic_lookup(struct cfq_data *,
 						struct io_context *);
@@ -238,27 +241,24 @@ static inline int rq_in_driver(struct cfq_data *cfqd)
 }
 
 static inline struct cfq_queue *cic_to_cfqq(struct cfq_io_context *cic,
-					    int is_sync)
+					    bool is_sync)
 {
-	return cic->cfqq[!!is_sync];
+	return cic->cfqq[is_sync];
 }
 
 static inline void cic_set_cfqq(struct cfq_io_context *cic,
-				struct cfq_queue *cfqq, int is_sync)
+				struct cfq_queue *cfqq, bool is_sync)
 {
-	cic->cfqq[!!is_sync] = cfqq;
+	cic->cfqq[is_sync] = cfqq;
 }
 
 /*
  * We regard a request as SYNC, if it's either a read or has the SYNC bit
  * set (in which case it could also be direct WRITE).
  */
-static inline int cfq_bio_sync(struct bio *bio)
+static inline bool cfq_bio_sync(struct bio *bio)
 {
-	if (bio_data_dir(bio) == READ || bio_rw_flagged(bio, BIO_RW_SYNCIO))
-		return 1;
-
-	return 0;
+	return bio_data_dir(bio) == READ || bio_rw_flagged(bio, BIO_RW_SYNCIO);
 }
 
 /*
@@ -285,7 +285,7 @@ static int cfq_queue_empty(struct request_queue *q)
  * if a queue is marked sync and has sync io queued. A sync queue with async
  * io only, should not get full sync slice length.
  */
-static inline int cfq_prio_slice(struct cfq_data *cfqd, int sync,
+static inline int cfq_prio_slice(struct cfq_data *cfqd, bool sync,
 				 unsigned short prio)
 {
 	const int base_slice = cfqd->cfq_slice[sync];
@@ -313,7 +313,7 @@ cfq_set_prio_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq)
  * isn't valid until the first request from the dispatch is activated
  * and the slice time set.
  */
-static inline int cfq_slice_used(struct cfq_queue *cfqq)
+static inline bool cfq_slice_used(struct cfq_queue *cfqq)
 {
 	if (cfq_cfqq_slice_new(cfqq))
 		return 0;
@@ -488,7 +488,7 @@ static unsigned long cfq_slice_offset(struct cfq_data *cfqd,
  * we will service the queues.
  */
 static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
-				 int add_front)
+				 bool add_front)
 {
 	struct rb_node **p, *parent;
 	struct cfq_queue *__cfqq;
@@ -504,11 +504,20 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 		} else
 			rb_key += jiffies;
 	} else if (!add_front) {
+		/*
+		 * Get our rb key offset. Subtract any residual slice
+		 * value carried from last service. A negative resid
+		 * count indicates slice overrun, and this should position
+		 * the next service time further away in the tree.
+		 */
 		rb_key = cfq_slice_offset(cfqd, cfqq) + jiffies;
-		rb_key += cfqq->slice_resid;
+		rb_key -= cfqq->slice_resid;
 		cfqq->slice_resid = 0;
-	} else
-		rb_key = 0;
+	} else {
+		rb_key = -HZ;
+		__cfqq = cfq_rb_first(&cfqd->service_tree);
+		rb_key += __cfqq ? __cfqq->rb_key : jiffies;
+	}
 
 	if (!RB_EMPTY_NODE(&cfqq->rb_node)) {
 		/*
@@ -542,7 +551,7 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 			n = &(*p)->rb_left;
 		else if (cfq_class_idle(cfqq) > cfq_class_idle(__cfqq))
 			n = &(*p)->rb_right;
-		else if (rb_key < __cfqq->rb_key)
+		else if (time_before(rb_key, __cfqq->rb_key))
 			n = &(*p)->rb_left;
 		else
 			n = &(*p)->rb_right;
@@ -822,8 +831,10 @@ cfq_merged_requests(struct request_queue *q, struct request *rq,
 	 * reposition in fifo if next is older than rq
 	 */
 	if (!list_empty(&rq->queuelist) && !list_empty(&next->queuelist) &&
-	    time_before(next->start_time, rq->start_time))
+	    time_before(rq_fifo_time(next), rq_fifo_time(rq))) {
 		list_move(&rq->queuelist, &next->queuelist);
+		rq_set_fifo_time(rq, rq_fifo_time(next));
+	}
 
 	cfq_remove_request(next);
 }
@@ -839,7 +850,7 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq,
 	 * Disallow merge of a sync bio into an async request.
 	 */
 	if (cfq_bio_sync(bio) && !rq_is_sync(rq))
-		return 0;
+		return false;
 
 	/*
 	 * Lookup the cfqq that this bio will be queued with. Allow
@@ -847,13 +858,10 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq,
 	 */
 	cic = cfq_cic_lookup(cfqd, current->io_context);
 	if (!cic)
-		return 0;
+		return false;
 
 	cfqq = cic_to_cfqq(cic, cfq_bio_sync(bio));
-	if (cfqq == RQ_CFQQ(rq))
-		return 1;
-
-	return 0;
+	return cfqq == RQ_CFQQ(rq);
 }
 
 static void __cfq_set_active_queue(struct cfq_data *cfqd,
@@ -881,7 +889,7 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd,
  */
 static void
 __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
-		    int timed_out)
+		    bool timed_out)
 {
 	cfq_log_cfqq(cfqd, cfqq, "slice expired t=%d", timed_out);
 
@@ -909,7 +917,7 @@ __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 	}
 }
 
-static inline void cfq_slice_expired(struct cfq_data *cfqd, int timed_out)
+static inline void cfq_slice_expired(struct cfq_data *cfqd, bool timed_out)
 {
 	struct cfq_queue *cfqq = cfqd->active_queue;
 
@@ -1021,7 +1029,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
  */
 static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd,
 					      struct cfq_queue *cur_cfqq,
-					      int probe)
+					      bool probe)
 {
 	struct cfq_queue *cfqq;
 
@@ -1085,6 +1093,15 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 	if (!cic || !atomic_read(&cic->ioc->nr_tasks))
 		return;
 
+	/*
+	 * If our average think time is larger than the remaining time
+	 * slice, then don't idle. This avoids overrunning the allotted
+	 * time slice.
+	 */
+	if (sample_valid(cic->ttime_samples) &&
+	    (cfqq->slice_end - jiffies < cic->ttime_mean))
+		return;
+
 	cfq_mark_cfqq_wait_request(cfqq);
 
 	/*
@@ -1124,9 +1141,7 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq)
  */
 static struct request *cfq_check_fifo(struct cfq_queue *cfqq)
 {
-	struct cfq_data *cfqd = cfqq->cfqd;
-	struct request *rq;
-	int fifo;
+	struct request *rq = NULL;
 
 	if (cfq_cfqq_fifo_expire(cfqq))
 		return NULL;
@@ -1136,13 +1151,11 @@ static struct request *cfq_check_fifo(struct cfq_queue *cfqq)
 	if (list_empty(&cfqq->fifo))
 		return NULL;
 
-	fifo = cfq_cfqq_sync(cfqq);
 	rq = rq_entry_fifo(cfqq->fifo.next);
-
-	if (time_before(jiffies, rq->start_time + cfqd->cfq_fifo_expire[fifo]))
+	if (time_before(jiffies, rq_fifo_time(rq)))
 		rq = NULL;
 
-	cfq_log_cfqq(cfqd, cfqq, "fifo=%p", rq);
+	cfq_log_cfqq(cfqq->cfqd, cfqq, "fifo=%p", rq);
 	return rq;
 }
 
@@ -1243,16 +1256,83 @@ static int cfq_forced_dispatch(struct cfq_data *cfqd)
 	return dispatched;
 }
 
+static bool cfq_may_dispatch(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+	unsigned int max_dispatch;
+
+	/*
+	 * Drain async requests before we start sync IO
+	 */
+	if (cfq_cfqq_idle_window(cfqq) && cfqd->rq_in_driver[BLK_RW_ASYNC])
+		return false;
+
+	/*
+	 * If this is an async queue and we have sync IO in flight, let it wait
+	 */
+	if (cfqd->sync_flight && !cfq_cfqq_sync(cfqq))
+		return false;
+
+	max_dispatch = cfqd->cfq_quantum;
+	if (cfq_class_idle(cfqq))
+		max_dispatch = 1;
+
+	/*
+	 * Does this cfqq already have too much IO in flight?
+	 */
+	if (cfqq->dispatched >= max_dispatch) {
+		/*
+		 * idle queue must always only have a single IO in flight
+		 */
+		if (cfq_class_idle(cfqq))
+			return false;
+
+		/*
+		 * We have other queues, don't allow more IO from this one
+		 */
+		if (cfqd->busy_queues > 1)
+			return false;
+
+		/*
+		 * Sole queue user, allow bigger slice
+		 */
+		max_dispatch *= 4;
+	}
+
+	/*
+	 * Async queues must wait a bit before being allowed dispatch.
+	 * We also ramp up the dispatch depth gradually for async IO,
+	 * based on the last sync IO we serviced
+	 */
+	if (!cfq_cfqq_sync(cfqq) && cfqd->cfq_latency) {
+		unsigned long last_sync = jiffies - cfqd->last_end_sync_rq;
+		unsigned int depth;
+
+		depth = last_sync / cfqd->cfq_slice[1];
+		if (!depth && !cfqq->dispatched)
+			depth = 1;
+		if (depth < max_dispatch)
+			max_dispatch = depth;
+	}
+
+	/*
+	 * If we're below the current max, allow a dispatch
+	 */
+	return cfqq->dispatched < max_dispatch;
+}
+
 /*
  * Dispatch a request from cfqq, moving them to the request queue
  * dispatch list.
  */
-static void cfq_dispatch_request(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+static bool cfq_dispatch_request(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
 	struct request *rq;
 
 	BUG_ON(RB_EMPTY_ROOT(&cfqq->sort_list));
 
+	if (!cfq_may_dispatch(cfqd, cfqq))
+		return false;
+
 	/*
 	 * follow expired path, else get first next available
 	 */
@@ -1271,6 +1351,8 @@ static void cfq_dispatch_request(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 		atomic_long_inc(&cic->ioc->refcount);
 		cfqd->active_cic = cic;
 	}
+
+	return true;
 }
 
 /*
@@ -1281,7 +1363,6 @@ static int cfq_dispatch_requests(struct request_queue *q, int force)
 {
 	struct cfq_data *cfqd = q->elevator->elevator_data;
 	struct cfq_queue *cfqq;
-	unsigned int max_dispatch;
 
 	if (!cfqd->busy_queues)
 		return 0;
@@ -1294,48 +1375,11 @@ static int cfq_dispatch_requests(struct request_queue *q, int force)
 		return 0;
 
 	/*
-	 * Drain async requests before we start sync IO
+	 * Dispatch a request from this cfqq, if it is allowed
 	 */
-	if (cfq_cfqq_idle_window(cfqq) && cfqd->rq_in_driver[BLK_RW_ASYNC])
+	if (!cfq_dispatch_request(cfqd, cfqq))
 		return 0;
 
-	/*
-	 * If this is an async queue and we have sync IO in flight, let it wait
-	 */
-	if (cfqd->sync_flight && !cfq_cfqq_sync(cfqq))
-		return 0;
-
-	max_dispatch = cfqd->cfq_quantum;
-	if (cfq_class_idle(cfqq))
-		max_dispatch = 1;
-
-	/*
-	 * Does this cfqq already have too much IO in flight?
-	 */
-	if (cfqq->dispatched >= max_dispatch) {
-		/*
-		 * idle queue must always only have a single IO in flight
-		 */
-		if (cfq_class_idle(cfqq))
-			return 0;
-
-		/*
-		 * We have other queues, don't allow more IO from this one
-		 */
-		if (cfqd->busy_queues > 1)
-			return 0;
-
-		/*
-		 * we are the only queue, allow up to 4 times of 'quantum'
-		 */
-		if (cfqq->dispatched >= 4 * max_dispatch)
-			return 0;
-	}
-
-	/*
-	 * Dispatch a request from this cfqq
-	 */
-	cfq_dispatch_request(cfqd, cfqq);
 	cfqq->slice_dispatch++;
 	cfq_clear_cfqq_must_dispatch(cfqq);
 
@@ -1635,7 +1679,7 @@ static void cfq_ioc_set_ioprio(struct io_context *ioc)
 }
 
 static void cfq_init_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq,
-			  pid_t pid, int is_sync)
+			  pid_t pid, bool is_sync)
 {
 	RB_CLEAR_NODE(&cfqq->rb_node);
 	RB_CLEAR_NODE(&cfqq->p_node);
@@ -1655,7 +1699,7 @@ static void cfq_init_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 }
 
 static struct cfq_queue *
-cfq_find_alloc_queue(struct cfq_data *cfqd, int is_sync,
+cfq_find_alloc_queue(struct cfq_data *cfqd, bool is_sync,
 		     struct io_context *ioc, gfp_t gfp_mask)
 {
 	struct cfq_queue *cfqq, *new_cfqq = NULL;
@@ -1719,7 +1763,7 @@ cfq_async_queue_prio(struct cfq_data *cfqd, int ioprio_class, int ioprio)
 }
 
 static struct cfq_queue *
-cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct io_context *ioc,
+cfq_get_queue(struct cfq_data *cfqd, bool is_sync, struct io_context *ioc,
 	      gfp_t gfp_mask)
 {
 	const int ioprio = task_ioprio(ioc);
@@ -1951,10 +1995,13 @@ cfq_update_idle_window(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 	enable_idle = old_idle = cfq_cfqq_idle_window(cfqq);
 
 	if (!atomic_read(&cic->ioc->nr_tasks) || !cfqd->cfq_slice_idle ||
-	    (cfqd->hw_tag && CIC_SEEKY(cic)))
+	    (!cfqd->cfq_latency && cfqd->hw_tag && CIC_SEEKY(cic)))
 		enable_idle = 0;
 	else if (sample_valid(cic->ttime_samples)) {
-		if (cic->ttime_mean > cfqd->cfq_slice_idle)
+		unsigned int slice_idle = cfqd->cfq_slice_idle;
+		if (sample_valid(cic->seek_samples) && CIC_SEEKY(cic))
+			slice_idle = msecs_to_jiffies(CFQ_MIN_TT);
+		if (cic->ttime_mean > slice_idle)
 			enable_idle = 0;
 		else
 			enable_idle = 1;
@@ -1973,7 +2020,7 @@ cfq_update_idle_window(struct cfq_data *cfqd, struct cfq_queue *cfqq,
  * Check if new_cfqq should preempt the currently active queue. Return 0 for
  * no or if we aren't sure, a 1 will cause a preempt.
  */
-static int
+static bool
 cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
 		   struct request *rq)
 {
@@ -1981,48 +2028,48 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
 
 	cfqq = cfqd->active_queue;
 	if (!cfqq)
-		return 0;
+		return false;
 
 	if (cfq_slice_used(cfqq))
-		return 1;
+		return true;
 
 	if (cfq_class_idle(new_cfqq))
-		return 0;
+		return false;
 
 	if (cfq_class_idle(cfqq))
-		return 1;
+		return true;
 
 	/*
 	 * if the new request is sync, but the currently running queue is
 	 * not, let the sync request have priority.
 	 */
 	if (rq_is_sync(rq) && !cfq_cfqq_sync(cfqq))
-		return 1;
+		return true;
 
 	/*
 	 * So both queues are sync. Let the new request get disk time if
 	 * it's a metadata request and the current queue is doing regular IO.
 	 */
 	if (rq_is_meta(rq) && !cfqq->meta_pending)
-		return 1;
+		return false;
 
 	/*
 	 * Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice.
 	 */
 	if (cfq_class_rt(new_cfqq) && !cfq_class_rt(cfqq))
-		return 1;
+		return true;
 
 	if (!cfqd->active_cic || !cfq_cfqq_wait_request(cfqq))
-		return 0;
+		return false;
 
 	/*
 	 * if this request is as-good as one we would expect from the
 	 * current cfqq, let it preempt
 	 */
 	if (cfq_rq_close(cfqd, rq))
-		return 1;
+		return true;
 
-	return 0;
+	return false;
 }
 
 /*
@@ -2107,6 +2154,7 @@ static void cfq_insert_request(struct request_queue *q, struct request *rq)
 
 	cfq_add_rq_rb(rq);
 
+	rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
 	list_add_tail(&rq->queuelist, &cfqq->fifo);
 
 	cfq_rq_enqueued(cfqd, cfqq, rq);
@@ -2157,8 +2205,10 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
 	if (cfq_cfqq_sync(cfqq))
 		cfqd->sync_flight--;
 
-	if (sync)
+	if (sync) {
 		RQ_CIC(rq)->last_end_request = now;
+		cfqd->last_end_sync_rq = now;
+	}
 
 	/*
 	 * If this is the active queue, check if it needs to be expired,
@@ -2284,7 +2334,7 @@ cfq_set_request(struct request_queue *q, struct request *rq, gfp_t gfp_mask)
 	struct cfq_data *cfqd = q->elevator->elevator_data;
 	struct cfq_io_context *cic;
 	const int rw = rq_data_dir(rq);
-	const int is_sync = rq_is_sync(rq);
+	const bool is_sync = rq_is_sync(rq);
 	struct cfq_queue *cfqq;
 	unsigned long flags;
 
@@ -2480,8 +2530,9 @@ static void *cfq_init_queue(struct request_queue *q)
 	cfqd->cfq_slice[1] = cfq_slice_sync;
 	cfqd->cfq_slice_async_rq = cfq_slice_async_rq;
 	cfqd->cfq_slice_idle = cfq_slice_idle;
+	cfqd->cfq_latency = 1;
 	cfqd->hw_tag = 1;
-
+	cfqd->last_end_sync_rq = jiffies;
 	return cfqd;
 }
 
@@ -2549,6 +2600,7 @@ SHOW_FUNCTION(cfq_slice_idle_show, cfqd->cfq_slice_idle, 1);
 SHOW_FUNCTION(cfq_slice_sync_show, cfqd->cfq_slice[1], 1);
 SHOW_FUNCTION(cfq_slice_async_show, cfqd->cfq_slice[0], 1);
 SHOW_FUNCTION(cfq_slice_async_rq_show, cfqd->cfq_slice_async_rq, 0);
+SHOW_FUNCTION(cfq_low_latency_show, cfqd->cfq_latency, 0);
 #undef SHOW_FUNCTION
 
 #define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, __CONV)			\
@@ -2580,6 +2632,7 @@ STORE_FUNCTION(cfq_slice_sync_store, &cfqd->cfq_slice[1], 1, UINT_MAX, 1);
 STORE_FUNCTION(cfq_slice_async_store, &cfqd->cfq_slice[0], 1, UINT_MAX, 1);
 STORE_FUNCTION(cfq_slice_async_rq_store, &cfqd->cfq_slice_async_rq, 1,
 		UINT_MAX, 0);
+STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0);
 #undef STORE_FUNCTION
 
 #define CFQ_ATTR(name) \
@@ -2595,6 +2648,7 @@ static struct elv_fs_entry cfq_attrs[] = {
 	CFQ_ATTR(slice_async),
 	CFQ_ATTR(slice_async_rq),
 	CFQ_ATTR(slice_idle),
+	CFQ_ATTR(low_latency),
 	__ATTR_NULL
 };
 
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 7865a34e0faa..9bd086c1a4d5 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -21,6 +21,11 @@ static int compat_put_int(unsigned long arg, int val)
 	return put_user(val, (compat_int_t __user *)compat_ptr(arg));
 }
 
+static int compat_put_uint(unsigned long arg, unsigned int val)
+{
+	return put_user(val, (compat_uint_t __user *)compat_ptr(arg));
+}
+
 static int compat_put_long(unsigned long arg, long val)
 {
 	return put_user(val, (compat_long_t __user *)compat_ptr(arg));
@@ -734,6 +739,14 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 	switch (cmd) {
 	case HDIO_GETGEO:
 		return compat_hdio_getgeo(disk, bdev, compat_ptr(arg));
+	case BLKPBSZGET:
+		return compat_put_uint(arg, bdev_physical_block_size(bdev));
+	case BLKIOMIN:
+		return compat_put_uint(arg, bdev_io_min(bdev));
+	case BLKIOOPT:
+		return compat_put_uint(arg, bdev_io_opt(bdev));
+	case BLKALIGNOFF:
+		return compat_put_int(arg, bdev_alignment_offset(bdev));
 	case BLKFLSBUF:
 	case BLKROSET:
 	case BLKDISCARD:
diff --git a/block/elevator.c b/block/elevator.c
index 1975b619c86d..a847046c6e53 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -1059,9 +1059,7 @@ ssize_t elv_iosched_store(struct request_queue *q, const char *name,
 		return count;
 
 	strlcpy(elevator_name, name, sizeof(elevator_name));
-	strstrip(elevator_name);
-
-	e = elevator_get(elevator_name);
+	e = elevator_get(strstrip(elevator_name));
 	if (!e) {
 		printk(KERN_ERR "elevator: type %s not found\n", elevator_name);
 		return -EINVAL;
diff --git a/block/ioctl.c b/block/ioctl.c
index d3e6b5827a34..1f4d1de12b09 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -138,6 +138,11 @@ static int put_int(unsigned long arg, int val)
 	return put_user(val, (int __user *)arg);
 }
 
+static int put_uint(unsigned long arg, unsigned int val)
+{
+	return put_user(val, (unsigned int __user *)arg);
+}
+
 static int put_long(unsigned long arg, long val)
 {
 	return put_user(val, (long __user *)arg);
@@ -263,10 +268,18 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 		return put_long(arg, (bdi->ra_pages * PAGE_CACHE_SIZE) / 512);
 	case BLKROGET:
 		return put_int(arg, bdev_read_only(bdev) != 0);
-	case BLKBSZGET: /* get the logical block size (cf. BLKSSZGET) */
+	case BLKBSZGET: /* get block device soft block size (cf. BLKSSZGET) */
 		return put_int(arg, block_size(bdev));
-	case BLKSSZGET: /* get block device hardware sector size */
+	case BLKSSZGET: /* get block device logical block size */
 		return put_int(arg, bdev_logical_block_size(bdev));
+	case BLKPBSZGET: /* get block device physical block size */
+		return put_uint(arg, bdev_physical_block_size(bdev));
+	case BLKIOMIN:
+		return put_uint(arg, bdev_io_min(bdev));
+	case BLKIOOPT:
+		return put_uint(arg, bdev_io_opt(bdev));
+	case BLKALIGNOFF:
+		return put_int(arg, bdev_alignment_offset(bdev));
 	case BLKSECTGET:
 		return put_ushort(arg, queue_max_sectors(bdev_get_queue(bdev)));
 	case BLKRASET:
diff --git a/crypto/aead.c b/crypto/aead.c
index d9aa733db164..0a55da70845e 100644
--- a/crypto/aead.c
+++ b/crypto/aead.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/rtnetlink.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/seq_file.h>
 
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index dd8729d674e5..93d2c7971df6 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -211,6 +211,18 @@ config ACPI_HOTPLUG_CPU
 	select ACPI_CONTAINER
 	default y
 
+config ACPI_PROCESSOR_AGGREGATOR
+	tristate "Processor Aggregator"
+	depends on ACPI_PROCESSOR
+	depends on EXPERIMENTAL
+	depends on X86
+	help
+	  ACPI 4.0 defines processor Aggregator, which enables OS to perform
+	  specific processor configuration and control that applies to all
+	  processors in the platform. Currently only logical processor idling
+	  is defined, which is to reduce power consumption. This driver
+	  supports the new device.
+
 config ACPI_THERMAL
 	tristate "Thermal Zone"
 	depends on ACPI_PROCESSOR
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 82cd49dc603b..7702118509a0 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -62,3 +62,5 @@ obj-$(CONFIG_ACPI_POWER_METER)	+= power_meter.o
 processor-y			:= processor_core.o processor_throttling.o
 processor-y			+= processor_idle.o processor_thermal.o
 processor-$(CONFIG_CPU_FREQ)	+= processor_perflib.o
+
+obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 98b9690b0159..b6ed60b57b0d 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -245,6 +245,7 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event)
 		acpi_bus_generate_netlink_event(device->pnp.device_class,
 						  dev_name(&device->dev), event,
 						  (u32) ac->state);
+		acpi_notifier_call_chain(device, event, (u32) ac->state);
 #ifdef CONFIG_ACPI_SYSFS_POWER
 		kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
 #endif
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
new file mode 100644
index 000000000000..0d2cdb86158b
--- /dev/null
+++ b/drivers/acpi/acpi_pad.c
@@ -0,0 +1,514 @@
+/*
+ * acpi_pad.c ACPI Processor Aggregator Driver
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/cpu.h>
+#include <linux/clockchips.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+#define ACPI_PROCESSOR_AGGREGATOR_CLASS	"processor_aggregator"
+#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
+#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
+static DEFINE_MUTEX(isolated_cpus_lock);
+
+#define MWAIT_SUBSTATE_MASK	(0xf)
+#define MWAIT_CSTATE_MASK	(0xf)
+#define MWAIT_SUBSTATE_SIZE	(4)
+#define CPUID_MWAIT_LEAF (5)
+#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
+#define CPUID5_ECX_INTERRUPT_BREAK	(0x2)
+static unsigned long power_saving_mwait_eax;
+static void power_saving_mwait_init(void)
+{
+	unsigned int eax, ebx, ecx, edx;
+	unsigned int highest_cstate = 0;
+	unsigned int highest_subcstate = 0;
+	int i;
+
+	if (!boot_cpu_has(X86_FEATURE_MWAIT))
+		return;
+	if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
+		return;
+
+	cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
+
+	if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
+	    !(ecx & CPUID5_ECX_INTERRUPT_BREAK))
+		return;
+
+	edx >>= MWAIT_SUBSTATE_SIZE;
+	for (i = 0; i < 7 && edx; i++, edx >>= MWAIT_SUBSTATE_SIZE) {
+		if (edx & MWAIT_SUBSTATE_MASK) {
+			highest_cstate = i;
+			highest_subcstate = edx & MWAIT_SUBSTATE_MASK;
+		}
+	}
+	power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
+		(highest_subcstate - 1);
+
+	for_each_online_cpu(i)
+		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i);
+
+#if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86)
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+	case X86_VENDOR_INTEL:
+		/*
+		 * AMD Fam10h TSC will tick in all
+		 * C/P/S0/S1 states when this bit is set.
+		 */
+		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+			return;
+
+		/*FALL THROUGH*/
+	default:
+		/* TSC could halt in idle, so notify users */
+		mark_tsc_unstable("TSC halts in idle");
+	}
+#endif
+}
+
+static unsigned long cpu_weight[NR_CPUS];
+static int tsk_in_cpu[NR_CPUS] = {[0 ... NR_CPUS-1] = -1};
+static DECLARE_BITMAP(pad_busy_cpus_bits, NR_CPUS);
+static void round_robin_cpu(unsigned int tsk_index)
+{
+	struct cpumask *pad_busy_cpus = to_cpumask(pad_busy_cpus_bits);
+	cpumask_var_t tmp;
+	int cpu;
+	unsigned long min_weight = -1, preferred_cpu;
+
+	if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
+		return;
+
+	mutex_lock(&isolated_cpus_lock);
+	cpumask_clear(tmp);
+	for_each_cpu(cpu, pad_busy_cpus)
+		cpumask_or(tmp, tmp, topology_thread_cpumask(cpu));
+	cpumask_andnot(tmp, cpu_online_mask, tmp);
+	/* avoid HT sibilings if possible */
+	if (cpumask_empty(tmp))
+		cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
+	if (cpumask_empty(tmp)) {
+		mutex_unlock(&isolated_cpus_lock);
+		return;
+	}
+	for_each_cpu(cpu, tmp) {
+		if (cpu_weight[cpu] < min_weight) {
+			min_weight = cpu_weight[cpu];
+			preferred_cpu = cpu;
+		}
+	}
+
+	if (tsk_in_cpu[tsk_index] != -1)
+		cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus);
+	tsk_in_cpu[tsk_index] = preferred_cpu;
+	cpumask_set_cpu(preferred_cpu, pad_busy_cpus);
+	cpu_weight[preferred_cpu]++;
+	mutex_unlock(&isolated_cpus_lock);
+
+	set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
+}
+
+static void exit_round_robin(unsigned int tsk_index)
+{
+	struct cpumask *pad_busy_cpus = to_cpumask(pad_busy_cpus_bits);
+	cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus);
+	tsk_in_cpu[tsk_index] = -1;
+}
+
+static unsigned int idle_pct = 5; /* percentage */
+static unsigned int round_robin_time = 10; /* second */
+static int power_saving_thread(void *data)
+{
+	struct sched_param param = {.sched_priority = 1};
+	int do_sleep;
+	unsigned int tsk_index = (unsigned long)data;
+	u64 last_jiffies = 0;
+
+	sched_setscheduler(current, SCHED_RR, &param);
+
+	while (!kthread_should_stop()) {
+		int cpu;
+		u64 expire_time;
+
+		try_to_freeze();
+
+		/* round robin to cpus */
+		if (last_jiffies + round_robin_time * HZ < jiffies) {
+			last_jiffies = jiffies;
+			round_robin_cpu(tsk_index);
+		}
+
+		do_sleep = 0;
+
+		current_thread_info()->status &= ~TS_POLLING;
+		/*
+		 * TS_POLLING-cleared state must be visible before we test
+		 * NEED_RESCHED:
+		 */
+		smp_mb();
+
+		expire_time = jiffies + HZ * (100 - idle_pct) / 100;
+
+		while (!need_resched()) {
+			local_irq_disable();
+			cpu = smp_processor_id();
+			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
+				&cpu);
+			stop_critical_timings();
+
+			__monitor((void *)&current_thread_info()->flags, 0, 0);
+			smp_mb();
+			if (!need_resched())
+				__mwait(power_saving_mwait_eax, 1);
+
+			start_critical_timings();
+			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
+				&cpu);
+			local_irq_enable();
+
+			if (jiffies > expire_time) {
+				do_sleep = 1;
+				break;
+			}
+		}
+
+		current_thread_info()->status |= TS_POLLING;
+
+		/*
+		 * current sched_rt has threshold for rt task running time.
+		 * When a rt task uses 95% CPU time, the rt thread will be
+		 * scheduled out for 5% CPU time to not starve other tasks. But
+		 * the mechanism only works when all CPUs have RT task running,
+		 * as if one CPU hasn't RT task, RT task from other CPUs will
+		 * borrow CPU time from this CPU and cause RT task use > 95%
+		 * CPU time. To make 'avoid staration' work, takes a nap here.
+		 */
+		if (do_sleep)
+			schedule_timeout_killable(HZ * idle_pct / 100);
+	}
+
+	exit_round_robin(tsk_index);
+	return 0;
+}
+
+static struct task_struct *ps_tsks[NR_CPUS];
+static unsigned int ps_tsk_num;
+static int create_power_saving_task(void)
+{
+	ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
+		(void *)(unsigned long)ps_tsk_num,
+		"power_saving/%d", ps_tsk_num);
+	if (ps_tsks[ps_tsk_num]) {
+		ps_tsk_num++;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static void destroy_power_saving_task(void)
+{
+	if (ps_tsk_num > 0) {
+		ps_tsk_num--;
+		kthread_stop(ps_tsks[ps_tsk_num]);
+	}
+}
+
+static void set_power_saving_task_num(unsigned int num)
+{
+	if (num > ps_tsk_num) {
+		while (ps_tsk_num < num) {
+			if (create_power_saving_task())
+				return;
+		}
+	} else if (num < ps_tsk_num) {
+		while (ps_tsk_num > num)
+			destroy_power_saving_task();
+	}
+}
+
+static int acpi_pad_idle_cpus(unsigned int num_cpus)
+{
+	get_online_cpus();
+
+	num_cpus = min_t(unsigned int, num_cpus, num_online_cpus());
+	set_power_saving_task_num(num_cpus);
+
+	put_online_cpus();
+	return 0;
+}
+
+static uint32_t acpi_pad_idle_cpus_num(void)
+{
+	return ps_tsk_num;
+}
+
+static ssize_t acpi_pad_rrtime_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	unsigned long num;
+	if (strict_strtoul(buf, 0, &num))
+		return -EINVAL;
+	if (num < 1 || num >= 100)
+		return -EINVAL;
+	mutex_lock(&isolated_cpus_lock);
+	round_robin_time = num;
+	mutex_unlock(&isolated_cpus_lock);
+	return count;
+}
+
+static ssize_t acpi_pad_rrtime_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%d", round_robin_time);
+}
+static DEVICE_ATTR(rrtime, S_IRUGO|S_IWUSR,
+	acpi_pad_rrtime_show,
+	acpi_pad_rrtime_store);
+
+static ssize_t acpi_pad_idlepct_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	unsigned long num;
+	if (strict_strtoul(buf, 0, &num))
+		return -EINVAL;
+	if (num < 1 || num >= 100)
+		return -EINVAL;
+	mutex_lock(&isolated_cpus_lock);
+	idle_pct = num;
+	mutex_unlock(&isolated_cpus_lock);
+	return count;
+}
+
+static ssize_t acpi_pad_idlepct_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%d", idle_pct);
+}
+static DEVICE_ATTR(idlepct, S_IRUGO|S_IWUSR,
+	acpi_pad_idlepct_show,
+	acpi_pad_idlepct_store);
+
+static ssize_t acpi_pad_idlecpus_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	unsigned long num;
+	if (strict_strtoul(buf, 0, &num))
+		return -EINVAL;
+	mutex_lock(&isolated_cpus_lock);
+	acpi_pad_idle_cpus(num);
+	mutex_unlock(&isolated_cpus_lock);
+	return count;
+}
+
+static ssize_t acpi_pad_idlecpus_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return cpumask_scnprintf(buf, PAGE_SIZE,
+		to_cpumask(pad_busy_cpus_bits));
+}
+static DEVICE_ATTR(idlecpus, S_IRUGO|S_IWUSR,
+	acpi_pad_idlecpus_show,
+	acpi_pad_idlecpus_store);
+
+static int acpi_pad_add_sysfs(struct acpi_device *device)
+{
+	int result;
+
+	result = device_create_file(&device->dev, &dev_attr_idlecpus);
+	if (result)
+		return -ENODEV;
+	result = device_create_file(&device->dev, &dev_attr_idlepct);
+	if (result) {
+		device_remove_file(&device->dev, &dev_attr_idlecpus);
+		return -ENODEV;
+	}
+	result = device_create_file(&device->dev, &dev_attr_rrtime);
+	if (result) {
+		device_remove_file(&device->dev, &dev_attr_idlecpus);
+		device_remove_file(&device->dev, &dev_attr_idlepct);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void acpi_pad_remove_sysfs(struct acpi_device *device)
+{
+	device_remove_file(&device->dev, &dev_attr_idlecpus);
+	device_remove_file(&device->dev, &dev_attr_idlepct);
+	device_remove_file(&device->dev, &dev_attr_rrtime);
+}
+
+/* Query firmware how many CPUs should be idle */
+static int acpi_pad_pur(acpi_handle handle, int *num_cpus)
+{
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	acpi_status status;
+	union acpi_object *package;
+	int rev, num, ret = -EINVAL;
+
+	status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+	package = buffer.pointer;
+	if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2)
+		goto out;
+	rev = package->package.elements[0].integer.value;
+	num = package->package.elements[1].integer.value;
+	if (rev != 1)
+		goto out;
+	*num_cpus = num;
+	ret = 0;
+out:
+	kfree(buffer.pointer);
+	return ret;
+}
+
+/* Notify firmware how many CPUs are idle */
+static void acpi_pad_ost(acpi_handle handle, int stat,
+	uint32_t idle_cpus)
+{
+	union acpi_object params[3] = {
+		{.type = ACPI_TYPE_INTEGER,},
+		{.type = ACPI_TYPE_INTEGER,},
+		{.type = ACPI_TYPE_BUFFER,},
+	};
+	struct acpi_object_list arg_list = {3, params};
+
+	params[0].integer.value = ACPI_PROCESSOR_AGGREGATOR_NOTIFY;
+	params[1].integer.value =  stat;
+	params[2].buffer.length = 4;
+	params[2].buffer.pointer = (void *)&idle_cpus;
+	acpi_evaluate_object(handle, "_OST", &arg_list, NULL);
+}
+
+static void acpi_pad_handle_notify(acpi_handle handle)
+{
+	int num_cpus, ret;
+	uint32_t idle_cpus;
+
+	mutex_lock(&isolated_cpus_lock);
+	if (acpi_pad_pur(handle, &num_cpus)) {
+		mutex_unlock(&isolated_cpus_lock);
+		return;
+	}
+	ret = acpi_pad_idle_cpus(num_cpus);
+	idle_cpus = acpi_pad_idle_cpus_num();
+	if (!ret)
+		acpi_pad_ost(handle, 0, idle_cpus);
+	else
+		acpi_pad_ost(handle, 1, 0);
+	mutex_unlock(&isolated_cpus_lock);
+}
+
+static void acpi_pad_notify(acpi_handle handle, u32 event,
+	void *data)
+{
+	struct acpi_device *device = data;
+
+	switch (event) {
+	case ACPI_PROCESSOR_AGGREGATOR_NOTIFY:
+		acpi_pad_handle_notify(handle);
+		acpi_bus_generate_proc_event(device, event, 0);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+			dev_name(&device->dev), event, 0);
+		break;
+	default:
+		printk(KERN_WARNING"Unsupported event [0x%x]\n", event);
+		break;
+	}
+}
+
+static int acpi_pad_add(struct acpi_device *device)
+{
+	acpi_status status;
+
+	strcpy(acpi_device_name(device), ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_PROCESSOR_AGGREGATOR_CLASS);
+
+	if (acpi_pad_add_sysfs(device))
+		return -ENODEV;
+
+	status = acpi_install_notify_handler(device->handle,
+		ACPI_DEVICE_NOTIFY, acpi_pad_notify, device);
+	if (ACPI_FAILURE(status)) {
+		acpi_pad_remove_sysfs(device);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int acpi_pad_remove(struct acpi_device *device,
+	int type)
+{
+	mutex_lock(&isolated_cpus_lock);
+	acpi_pad_idle_cpus(0);
+	mutex_unlock(&isolated_cpus_lock);
+
+	acpi_remove_notify_handler(device->handle,
+		ACPI_DEVICE_NOTIFY, acpi_pad_notify);
+	acpi_pad_remove_sysfs(device);
+	return 0;
+}
+
+static const struct acpi_device_id pad_device_ids[] = {
+	{"ACPI000C", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, pad_device_ids);
+
+static struct acpi_driver acpi_pad_driver = {
+	.name = "processor_aggregator",
+	.class = ACPI_PROCESSOR_AGGREGATOR_CLASS,
+	.ids = pad_device_ids,
+	.ops = {
+		.add = acpi_pad_add,
+		.remove = acpi_pad_remove,
+	},
+};
+
+static int __init acpi_pad_init(void)
+{
+	power_saving_mwait_init();
+	if (power_saving_mwait_eax == 0)
+		return -EINVAL;
+
+	return acpi_bus_register_driver(&acpi_pad_driver);
+}
+
+static void __exit acpi_pad_exit(void)
+{
+	acpi_bus_unregister_driver(&acpi_pad_driver);
+}
+
+module_init(acpi_pad_init);
+module_exit(acpi_pad_exit);
+MODULE_AUTHOR("Shaohua Li<shaohua.li@intel.com>");
+MODULE_DESCRIPTION("ACPI Processor Aggregator Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 9335b87c5174..0c9c6a9a002c 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -251,6 +251,9 @@ int acpi_lid_open(void)
 	acpi_status status;
 	unsigned long long state;
 
+	if (!lid_device)
+		return -ENODEV;
+
 	status = acpi_evaluate_integer(lid_device->handle, "_LID", NULL,
 				       &state);
 	if (ACPI_FAILURE(status))
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 3a2cfefc71ab..7338b6a3e049 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -67,7 +67,7 @@ struct dock_station {
 	struct list_head dependent_devices;
 	struct list_head hotplug_devices;
 
-	struct list_head sibiling;
+	struct list_head sibling;
 	struct platform_device *dock_device;
 };
 static LIST_HEAD(dock_stations);
@@ -275,7 +275,7 @@ int is_dock_device(acpi_handle handle)
 
 	if (is_dock(handle))
 		return 1;
-	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		if (find_dock_dependent_device(dock_station, handle))
 			return 1;
 	}
@@ -619,7 +619,7 @@ register_hotplug_dock_device(acpi_handle handle, struct acpi_dock_ops *ops,
 	 * make sure this handle is for a device dependent on the dock,
 	 * this would include the dock station itself
 	 */
-	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		/*
 		 * An ATA bay can be in a dock and itself can be ejected
 		 * seperately, so there are two 'dock stations' which need the
@@ -651,7 +651,7 @@ void unregister_hotplug_dock_device(acpi_handle handle)
 	if (!dock_station_count)
 		return;
 
-	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		dd = find_dock_dependent_device(dock_station, handle);
 		if (dd)
 			dock_del_hotplug_device(dock_station, dd);
@@ -787,7 +787,7 @@ static int acpi_dock_notifier_call(struct notifier_block *this,
 	if (event != ACPI_NOTIFY_BUS_CHECK && event != ACPI_NOTIFY_DEVICE_CHECK
 	   && event != ACPI_NOTIFY_EJECT_REQUEST)
 		return 0;
-	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		if (dock_station->handle == handle) {
 			struct dock_data *dock_data;
 
@@ -958,7 +958,7 @@ static int dock_add(acpi_handle handle)
 	dock_station->last_dock_time = jiffies - HZ;
 	INIT_LIST_HEAD(&dock_station->dependent_devices);
 	INIT_LIST_HEAD(&dock_station->hotplug_devices);
-	INIT_LIST_HEAD(&dock_station->sibiling);
+	INIT_LIST_HEAD(&dock_station->sibling);
 	spin_lock_init(&dock_station->dd_lock);
 	mutex_init(&dock_station->hp_lock);
 	ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
@@ -1044,7 +1044,7 @@ static int dock_add(acpi_handle handle)
 	add_dock_dependent_device(dock_station, dd);
 
 	dock_station_count++;
-	list_add(&dock_station->sibiling, &dock_stations);
+	list_add(&dock_station->sibling, &dock_stations);
 	return 0;
 
 dock_add_err_unregister:
@@ -1149,7 +1149,7 @@ static void __exit dock_exit(void)
 	struct dock_station *tmp;
 
 	unregister_acpi_bus_notifier(&dock_acpi_notifier);
-	list_for_each_entry_safe(dock_station, tmp, &dock_stations, sibiling)
+	list_for_each_entry_safe(dock_station, tmp, &dock_stations, sibling)
 		dock_remove(dock_station);
 }
 
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index f70796081c4c..baef28c1e630 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -119,6 +119,8 @@ static struct acpi_ec {
 } *boot_ec, *first_ec;
 
 static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
+static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
+static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
 
 /* --------------------------------------------------------------------------
                              Transaction Management
@@ -232,10 +234,8 @@ static int ec_poll(struct acpi_ec *ec)
 			}
 			advance_transaction(ec, acpi_ec_read_status(ec));
 		} while (time_before(jiffies, delay));
-		if (!ec->curr->irq_count ||
-		    (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF))
+		if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
 			break;
-		/* try restart command if we get any false interrupts */
 		pr_debug(PREFIX "controller reset, restart transaction\n");
 		spin_lock_irqsave(&ec->curr_lock, flags);
 		start_transaction(ec);
@@ -899,6 +899,44 @@ static const struct acpi_device_id ec_device_ids[] = {
 	{"", 0},
 };
 
+/* Some BIOS do not survive early DSDT scan, skip it */
+static int ec_skip_dsdt_scan(const struct dmi_system_id *id)
+{
+	EC_FLAGS_SKIP_DSDT_SCAN = 1;
+	return 0;
+}
+
+/* ASUStek often supplies us with broken ECDT, validate it */
+static int ec_validate_ecdt(const struct dmi_system_id *id)
+{
+	EC_FLAGS_VALIDATE_ECDT = 1;
+	return 0;
+}
+
+/* MSI EC needs special treatment, enable it */
+static int ec_flag_msi(const struct dmi_system_id *id)
+{
+	EC_FLAGS_MSI = 1;
+	EC_FLAGS_VALIDATE_ECDT = 1;
+	return 0;
+}
+
+static struct dmi_system_id __initdata ec_dmi_table[] = {
+	{
+	ec_skip_dsdt_scan, "Compal JFL92", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
+	DMI_MATCH(DMI_BOARD_NAME, "JFL92") }, NULL},
+	{
+	ec_flag_msi, "MSI hardware", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Micro-Star"),
+	DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star") }, NULL},
+	{
+	ec_validate_ecdt, "ASUS hardware", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
+	{},
+};
+
+
 int __init acpi_ec_ecdt_probe(void)
 {
 	acpi_status status;
@@ -911,11 +949,7 @@ int __init acpi_ec_ecdt_probe(void)
 	/*
 	 * Generate a boot ec context
 	 */
-	if (dmi_name_in_vendors("Micro-Star") ||
-	    dmi_name_in_vendors("Notebook")) {
-		pr_info(PREFIX "Enabling special treatment for EC from MSI.\n");
-		EC_FLAGS_MSI = 1;
-	}
+	dmi_check_system(ec_dmi_table);
 	status = acpi_get_table(ACPI_SIG_ECDT, 1,
 				(struct acpi_table_header **)&ecdt_ptr);
 	if (ACPI_SUCCESS(status)) {
@@ -926,7 +960,7 @@ int __init acpi_ec_ecdt_probe(void)
 		boot_ec->handle = ACPI_ROOT_OBJECT;
 		acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
 		/* Don't trust ECDT, which comes from ASUSTek */
-		if (!dmi_name_in_vendors("ASUS") && EC_FLAGS_MSI == 0)
+		if (!EC_FLAGS_VALIDATE_ECDT)
 			goto install;
 		saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
 		if (!saved_ec)
@@ -934,6 +968,10 @@ int __init acpi_ec_ecdt_probe(void)
 		memcpy(saved_ec, boot_ec, sizeof(struct acpi_ec));
 	/* fall through */
 	}
+
+	if (EC_FLAGS_SKIP_DSDT_SCAN)
+		return -ENODEV;
+
 	/* This workaround is needed only on some broken machines,
 	 * which require early EC, but fail to provide ECDT */
 	printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 31122214e0ec..1af808171d46 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -389,6 +389,17 @@ struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
 
 		pbus = pdev->subordinate;
 		pci_dev_put(pdev);
+
+		/*
+		 * This function may be called for a non-PCI device that has a
+		 * PCI parent (eg. a disk under a PCI SATA controller).  In that
+		 * case pdev->subordinate will be NULL for the parent.
+		 */
+		if (!pbus) {
+			dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
+			pdev = NULL;
+			break;
+		}
 	}
 out:
 	list_for_each_entry_safe(node, tmp, &device_list, node)
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index d0d550d22a6d..f8b6f555ba52 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -398,6 +398,8 @@ acpi_system_write_wakeup_device(struct file *file,
 
 	if (len > 4)
 		len = 4;
+	if (len < 0)
+		return -EFAULT;
 
 	if (copy_from_user(strbuf, buffer, len))
 		return -EFAULT;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index c2d4d6e09364..c567b46dfa0f 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -863,13 +863,6 @@ static int acpi_processor_add(struct acpi_device *device)
 		goto err_remove_sysfs;
 	}
 
-	if (pr->flags.throttling) {
-		printk(KERN_INFO PREFIX "%s [%s] (supports",
-		       acpi_device_name(device), acpi_device_bid(device));
-		printk(" %d throttling states", pr->throttling.state_count);
-		printk(")\n");
-	}
-
 	return 0;
 
 err_remove_sysfs:
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 468921bed22f..14a7481c97d7 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1052,6 +1052,8 @@ static void acpi_device_set_id(struct acpi_device *device)
 			device->flags.bus_address = 1;
 		}
 
+		kfree(info);
+
 		/*
 		 * Some devices don't reliably have _HIDs & _CIDs, so add
 		 * synthetic HIDs to make sure drivers can find them.
@@ -1325,13 +1327,8 @@ static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops,
 			 struct acpi_device **child)
 {
 	acpi_status status;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	void *device = NULL;
 
-	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
-	printk(KERN_INFO PREFIX "Enumerating devices from [%s]\n",
-	       (char *) buffer.pointer);
-
 	status = acpi_bus_check_add(handle, 0, ops, &device);
 	if (ACPI_SUCCESS(status))
 		acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index a4fddb24476f..64e3c581b7a9 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -285,7 +285,7 @@ static int acpi_video_device_brightness_open_fs(struct inode *inode,
 						struct file *file);
 static ssize_t acpi_video_device_write_brightness(struct file *file,
 	const char __user *buffer, size_t count, loff_t *data);
-static struct file_operations acpi_video_device_brightness_fops = {
+static const struct file_operations acpi_video_device_brightness_fops = {
 	.owner = THIS_MODULE,
 	.open = acpi_video_device_brightness_open_fs,
 	.read = seq_read,
@@ -1109,7 +1109,12 @@ static int acpi_video_bus_check(struct acpi_video_bus *video)
 	 */
 
 	/* Does this device support video switching? */
-	if (video->cap._DOS) {
+	if (video->cap._DOS || video->cap._DOD) {
+		if (!video->cap._DOS) {
+			printk(KERN_WARNING FW_BUG
+				"ACPI(%s) defines _DOD but not _DOS\n",
+				acpi_device_bid(video->device));
+		}
 		video->flags.multihead = 1;
 		status = 0;
 	}
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 7032f25da9b5..575593a8b4e6 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -84,7 +84,7 @@ long acpi_is_video_device(struct acpi_device *device)
 		return 0;
 
 	/* Does this device able to support video switching ? */
-	if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) &&
+	if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) ||
 	    ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
 		video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index acd1162712b1..a06f5d6375a8 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -122,6 +122,7 @@ enum {
 	HOST_VERSION		= 0x10, /* AHCI spec. version compliancy */
 	HOST_EM_LOC		= 0x1c, /* Enclosure Management location */
 	HOST_EM_CTL		= 0x20, /* Enclosure Management Control */
+	HOST_CAP2		= 0x24, /* host capabilities, extended */
 
 	/* HOST_CTL bits */
 	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
@@ -129,16 +130,29 @@ enum {
 	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
 
 	/* HOST_CAP bits */
+	HOST_CAP_SXS		= (1 << 5),  /* Supports External SATA */
 	HOST_CAP_EMS		= (1 << 6),  /* Enclosure Management support */
-	HOST_CAP_SSC		= (1 << 14), /* Slumber capable */
+	HOST_CAP_CCC		= (1 << 7),  /* Command Completion Coalescing */
+	HOST_CAP_PART		= (1 << 13), /* Partial state capable */
+	HOST_CAP_SSC		= (1 << 14), /* Slumber state capable */
+	HOST_CAP_PIO_MULTI	= (1 << 15), /* PIO multiple DRQ support */
+	HOST_CAP_FBS		= (1 << 16), /* FIS-based switching support */
 	HOST_CAP_PMP		= (1 << 17), /* Port Multiplier support */
+	HOST_CAP_ONLY		= (1 << 18), /* Supports AHCI mode only */
 	HOST_CAP_CLO		= (1 << 24), /* Command List Override support */
+	HOST_CAP_LED		= (1 << 25), /* Supports activity LED */
 	HOST_CAP_ALPM		= (1 << 26), /* Aggressive Link PM support */
 	HOST_CAP_SSS		= (1 << 27), /* Staggered Spin-up */
+	HOST_CAP_MPS		= (1 << 28), /* Mechanical presence switch */
 	HOST_CAP_SNTF		= (1 << 29), /* SNotification register */
 	HOST_CAP_NCQ		= (1 << 30), /* Native Command Queueing */
 	HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */
 
+	/* HOST_CAP2 bits */
+	HOST_CAP2_BOH		= (1 << 0),  /* BIOS/OS handoff supported */
+	HOST_CAP2_NVMHCI	= (1 << 1),  /* NVMHCI supported */
+	HOST_CAP2_APST		= (1 << 2),  /* Automatic partial to slumber */
+
 	/* registers for each SATA port */
 	PORT_LST_ADDR		= 0x00, /* command list DMA addr */
 	PORT_LST_ADDR_HI	= 0x04, /* command list DMA addr hi */
@@ -267,8 +281,10 @@ struct ahci_em_priv {
 struct ahci_host_priv {
 	unsigned int		flags;		/* AHCI_HFLAG_* */
 	u32			cap;		/* cap to use */
+	u32			cap2;		/* cap2 to use */
 	u32			port_map;	/* port map to use */
 	u32			saved_cap;	/* saved initial cap */
+	u32			saved_cap2;	/* saved initial cap2 */
 	u32			saved_port_map;	/* saved initial port_map */
 	u32 			em_loc; /* enclosure management location */
 };
@@ -331,12 +347,15 @@ static void ahci_init_sw_activity(struct ata_link *link);
 
 static ssize_t ahci_show_host_caps(struct device *dev,
 				   struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_cap2(struct device *dev,
+				   struct device_attribute *attr, char *buf);
 static ssize_t ahci_show_host_version(struct device *dev,
 				      struct device_attribute *attr, char *buf);
 static ssize_t ahci_show_port_cmd(struct device *dev,
 				  struct device_attribute *attr, char *buf);
 
 DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
+DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
 DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
 DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
 
@@ -345,6 +364,7 @@ static struct device_attribute *ahci_shost_attrs[] = {
 	&dev_attr_em_message_type,
 	&dev_attr_em_message,
 	&dev_attr_ahci_host_caps,
+	&dev_attr_ahci_host_cap2,
 	&dev_attr_ahci_host_version,
 	&dev_attr_ahci_port_cmd,
 	NULL
@@ -447,7 +467,8 @@ static const struct ata_port_info ahci_port_info[] = {
 	[board_ahci_sb600] =
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL |
-				 AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255),
+				 AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
+				 AHCI_HFLAG_32BIT_ONLY),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
@@ -554,7 +575,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
 
 	/* AMD */
-	{ PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD SB900 */
+	{ PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
 	/* AMD is using RAID class only for ahci controllers */
 	{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
@@ -584,6 +605,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq },	/* MCP67 */
 	{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq },	/* MCP67 */
 	{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq },	/* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq },	/* Linux ID */
 	{ PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq },	/* MCP73 */
 	{ PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq },	/* MCP73 */
 	{ PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq },	/* MCP73 */
@@ -732,6 +754,16 @@ static ssize_t ahci_show_host_caps(struct device *dev,
 	return sprintf(buf, "%x\n", hpriv->cap);
 }
 
+static ssize_t ahci_show_host_cap2(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+
+	return sprintf(buf, "%x\n", hpriv->cap2);
+}
+
 static ssize_t ahci_show_host_version(struct device *dev,
 				   struct device_attribute *attr, char *buf)
 {
@@ -771,7 +803,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 				     struct ahci_host_priv *hpriv)
 {
 	void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
-	u32 cap, port_map;
+	u32 cap, cap2, vers, port_map;
 	int i;
 	int mv;
 
@@ -784,6 +816,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 	hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
 	hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
 
+	/* CAP2 register is only defined for AHCI 1.2 and later */
+	vers = readl(mmio + HOST_VERSION);
+	if ((vers >> 16) > 1 ||
+	   ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
+		hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
+	else
+		hpriv->saved_cap2 = cap2 = 0;
+
 	/* some chips have errata preventing 64bit use */
 	if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
 		dev_printk(KERN_INFO, &pdev->dev,
@@ -869,6 +909,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 
 	/* record values to use during operation */
 	hpriv->cap = cap;
+	hpriv->cap2 = cap2;
 	hpriv->port_map = port_map;
 }
 
@@ -887,6 +928,8 @@ static void ahci_restore_initial_config(struct ata_host *host)
 	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 
 	writel(hpriv->saved_cap, mmio + HOST_CAP);
+	if (hpriv->saved_cap2)
+		writel(hpriv->saved_cap2, mmio + HOST_CAP2);
 	writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
 	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
 }
@@ -2534,13 +2577,14 @@ static void ahci_print_info(struct ata_host *host)
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct pci_dev *pdev = to_pci_dev(host->dev);
 	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-	u32 vers, cap, impl, speed;
+	u32 vers, cap, cap2, impl, speed;
 	const char *speed_s;
 	u16 cc;
 	const char *scc_s;
 
 	vers = readl(mmio + HOST_VERSION);
 	cap = hpriv->cap;
+	cap2 = hpriv->cap2;
 	impl = hpriv->port_map;
 
 	speed = (cap >> 20) & 0xf;
@@ -2583,25 +2627,29 @@ static void ahci_print_info(struct ata_host *host)
 		"flags: "
 		"%s%s%s%s%s%s%s"
 		"%s%s%s%s%s%s%s"
-		"%s\n"
+		"%s%s%s%s%s%s\n"
 		,
 
-		cap & (1 << 31) ? "64bit " : "",
-		cap & (1 << 30) ? "ncq " : "",
-		cap & (1 << 29) ? "sntf " : "",
-		cap & (1 << 28) ? "ilck " : "",
-		cap & (1 << 27) ? "stag " : "",
-		cap & (1 << 26) ? "pm " : "",
-		cap & (1 << 25) ? "led " : "",
-
-		cap & (1 << 24) ? "clo " : "",
-		cap & (1 << 19) ? "nz " : "",
-		cap & (1 << 18) ? "only " : "",
-		cap & (1 << 17) ? "pmp " : "",
-		cap & (1 << 15) ? "pio " : "",
-		cap & (1 << 14) ? "slum " : "",
-		cap & (1 << 13) ? "part " : "",
-		cap & (1 << 6) ? "ems ": ""
+		cap & HOST_CAP_64 ? "64bit " : "",
+		cap & HOST_CAP_NCQ ? "ncq " : "",
+		cap & HOST_CAP_SNTF ? "sntf " : "",
+		cap & HOST_CAP_MPS ? "ilck " : "",
+		cap & HOST_CAP_SSS ? "stag " : "",
+		cap & HOST_CAP_ALPM ? "pm " : "",
+		cap & HOST_CAP_LED ? "led " : "",
+		cap & HOST_CAP_CLO ? "clo " : "",
+		cap & HOST_CAP_ONLY ? "only " : "",
+		cap & HOST_CAP_PMP ? "pmp " : "",
+		cap & HOST_CAP_FBS ? "fbs " : "",
+		cap & HOST_CAP_PIO_MULTI ? "pio " : "",
+		cap & HOST_CAP_SSC ? "slum " : "",
+		cap & HOST_CAP_PART ? "part " : "",
+		cap & HOST_CAP_CCC ? "ccc " : "",
+		cap & HOST_CAP_EMS ? "ems " : "",
+		cap & HOST_CAP_SXS ? "sxs " : "",
+		cap2 & HOST_CAP2_APST ? "apst " : "",
+		cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
+		cap2 & HOST_CAP2_BOH ? "boh " : ""
 		);
 }
 
@@ -2650,17 +2698,15 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
 	}
 }
 
-/*
- * SB600 ahci controller on certain boards can't do 64bit DMA with
- * older BIOS.
- */
-static bool ahci_sb600_32bit_only(struct pci_dev *pdev)
+/* only some SB600 ahci controllers can do 64bit DMA */
+static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
 {
 	static const struct dmi_system_id sysids[] = {
 		/*
 		 * The oldest version known to be broken is 0901 and
 		 * working is 1501 which was released on 2007-10-26.
-		 * Force 32bit DMA on anything older than 1501.
+		 * Enable 64bit DMA on 1501 and anything newer.
+		 *
 		 * Please read bko#9412 for more info.
 		 */
 		{
@@ -2672,48 +2718,29 @@ static bool ahci_sb600_32bit_only(struct pci_dev *pdev)
 			},
 			.driver_data = "20071026",	/* yyyymmdd */
 		},
-		/*
-		 * It's yet unknown whether more recent BIOS fixes the
-		 * problem.  Blacklist the whole board for the time
-		 * being.  Please read the following thread for more
-		 * info.
-		 *
-		 * http://thread.gmane.org/gmane.linux.ide/42326
-		 */
-		{
-			.ident = "Gigabyte GA-MA69VM-S2",
-			.matches = {
-				DMI_MATCH(DMI_BOARD_VENDOR,
-					  "Gigabyte Technology Co., Ltd."),
-				DMI_MATCH(DMI_BOARD_NAME, "GA-MA69VM-S2"),
-			},
-		},
 		{ }
 	};
 	const struct dmi_system_id *match;
+	int year, month, date;
+	char buf[9];
 
 	match = dmi_first_match(sysids);
 	if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
 	    !match)
 		return false;
 
-	if (match->driver_data) {
-		int year, month, date;
-		char buf[9];
-
-		dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
-		snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
-
-		if (strcmp(buf, match->driver_data) >= 0)
-			return false;
+	dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
+	snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
 
+	if (strcmp(buf, match->driver_data) >= 0) {
+		dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
+			   match->ident);
+		return true;
+	} else {
 		dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
 			   "forcing 32bit DMA, update BIOS\n", match->ident);
-	} else
-		dev_printk(KERN_WARNING, &pdev->dev, "%s: this board can't "
-			   "do 64bit DMA, forcing 32bit\n", match->ident);
-
-	return true;
+		return false;
+	}
 }
 
 static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
@@ -2858,6 +2885,55 @@ static bool ahci_broken_online(struct pci_dev *pdev)
 	return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
 }
 
+#ifdef CONFIG_ATA_ACPI
+static void ahci_gtf_filter_workaround(struct ata_host *host)
+{
+	static const struct dmi_system_id sysids[] = {
+		/*
+		 * Aspire 3810T issues a bunch of SATA enable commands
+		 * via _GTF including an invalid one and one which is
+		 * rejected by the device.  Among the successful ones
+		 * is FPDMA non-zero offset enable which when enabled
+		 * only on the drive side leads to NCQ command
+		 * failures.  Filter it out.
+		 */
+		{
+			.ident = "Aspire 3810T",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"),
+			},
+			.driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET,
+		},
+		{ }
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(sysids);
+	unsigned int filter;
+	int i;
+
+	if (!dmi)
+		return;
+
+	filter = (unsigned long)dmi->driver_data;
+	dev_printk(KERN_INFO, host->dev,
+		   "applying extra ACPI _GTF filter 0x%x for %s\n",
+		   filter, dmi->ident);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		struct ata_link *link;
+		struct ata_device *dev;
+
+		ata_for_each_link(link, ap, EDGE)
+			ata_for_each_dev(dev, link, ALL)
+				dev->gtf_filter |= filter;
+	}
+}
+#else
+static inline void ahci_gtf_filter_workaround(struct ata_host *host)
+{}
+#endif
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
@@ -2926,9 +3002,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
 		hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
 
-	/* apply sb600 32bit only quirk */
-	if (ahci_sb600_32bit_only(pdev))
-		hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
+	/* only some SB600s can do 64bit DMA */
+	if (ahci_sb600_enable_64bit(pdev))
+		hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
 
 	if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
 		pci_intx(pdev, 1);
@@ -3023,6 +3099,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* apply workaround for ASUS P5W DH Deluxe mainboard */
 	ahci_p5wdh_workaround(host);
 
+	/* apply gtf filter quirk */
+	ahci_gtf_filter_workaround(host);
+
 	/* initialize adapter */
 	rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
 	if (rc)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 01964b6e6f6b..b0882cddfd4c 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -20,19 +20,9 @@
 
 #include <acpi/acpi_bus.h>
 
-enum {
-	ATA_ACPI_FILTER_SETXFER	= 1 << 0,
-	ATA_ACPI_FILTER_LOCK	= 1 << 1,
-	ATA_ACPI_FILTER_DIPM	= 1 << 2,
-
-	ATA_ACPI_FILTER_DEFAULT	= ATA_ACPI_FILTER_SETXFER |
-				  ATA_ACPI_FILTER_LOCK |
-				  ATA_ACPI_FILTER_DIPM,
-};
-
-static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
 module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
 
 #define NO_PORT_MULT		0xffff
 #define SATA_ADR(root, pmp)	(((root) << 16) | (pmp))
@@ -613,10 +603,11 @@ static void ata_acpi_gtf_to_tf(struct ata_device *dev,
 	tf->command = gtf->tf[6];	/* 0x1f7 */
 }
 
-static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+static int ata_acpi_filter_tf(struct ata_device *dev,
+			      const struct ata_taskfile *tf,
 			      const struct ata_taskfile *ptf)
 {
-	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
+	if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) {
 		/* libata doesn't use ACPI to configure transfer mode.
 		 * It will only confuse device configuration.  Skip.
 		 */
@@ -625,7 +616,7 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
 			return 1;
 	}
 
-	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+	if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) {
 		/* BIOS writers, sorry but we don't wanna lock
 		 * features unless the user explicitly said so.
 		 */
@@ -647,12 +638,23 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
 			return 1;
 	}
 
-	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+	if (tf->command == ATA_CMD_SET_FEATURES &&
+	    tf->feature == SETFEATURES_SATA_ENABLE) {
 		/* inhibit enabling DIPM */
-		if (tf->command == ATA_CMD_SET_FEATURES &&
-		    tf->feature == SETFEATURES_SATA_ENABLE &&
+		if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM &&
 		    tf->nsect == SATA_DIPM)
 			return 1;
+
+		/* inhibit FPDMA non-zero offset */
+		if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
+		    (tf->nsect == SATA_FPDMA_OFFSET ||
+		     tf->nsect == SATA_FPDMA_IN_ORDER))
+			return 1;
+
+		/* inhibit FPDMA auto activation */
+		if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
+		    tf->nsect == SATA_FPDMA_AA)
+			return 1;
 	}
 
 	return 0;
@@ -704,7 +706,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 		pptf = &ptf;
 	}
 
-	if (!ata_acpi_filter_tf(&tf, pptf)) {
+	if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
 		rtf = tf;
 		err_mask = ata_exec_internal(dev, &rtf, NULL,
 					     DMA_NONE, NULL, 0, 0);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0ddaf43d68c6..d7f0f1b1ae3e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5028,12 +5028,14 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 			qc->flags |= ATA_QCFLAG_FAILED;
 
 		if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
-			if (!ata_tag_internal(qc->tag)) {
-				/* always fill result TF for failed qc */
-				fill_result_tf(qc);
+			/* always fill result TF for failed qc */
+			fill_result_tf(qc);
+
+			if (!ata_tag_internal(qc->tag))
 				ata_qc_schedule_eh(qc);
-				return;
-			}
+			else
+				__ata_qc_complete(qc);
+			return;
 		}
 
 		WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
@@ -5591,6 +5593,9 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
 
 		dev->link = link;
 		dev->devno = dev - link->device;
+#ifdef CONFIG_ATA_ACPI
+		dev->gtf_filter = ata_acpi_gtf_filter;
+#endif
 		ata_dev_init(dev);
 	}
 }
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a04488f0de88..bba2ae5df1c2 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2667,14 +2667,14 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		dev->pio_mode = XFER_PIO_0;
 		dev->flags &= ~ATA_DFLAG_SLEEPING;
 
-		if (!ata_phys_link_offline(ata_dev_phys_link(dev))) {
-			/* apply class override */
-			if (lflags & ATA_LFLAG_ASSUME_ATA)
-				classes[dev->devno] = ATA_DEV_ATA;
-			else if (lflags & ATA_LFLAG_ASSUME_SEMB)
-				classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
-		} else
-			classes[dev->devno] = ATA_DEV_NONE;
+		if (ata_phys_link_offline(ata_dev_phys_link(dev)))
+			continue;
+
+		/* apply class override */
+		if (lflags & ATA_LFLAG_ASSUME_ATA)
+			classes[dev->devno] = ATA_DEV_ATA;
+		else if (lflags & ATA_LFLAG_ASSUME_SEMB)
+			classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
 	}
 
 	/* record current link speed */
@@ -2713,34 +2713,48 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ap->pflags &= ~ATA_PFLAG_EH_PENDING;
 	spin_unlock_irqrestore(link->ap->lock, flags);
 
-	/* Make sure onlineness and classification result correspond.
+	/*
+	 * Make sure onlineness and classification result correspond.
 	 * Hotplug could have happened during reset and some
 	 * controllers fail to wait while a drive is spinning up after
 	 * being hotplugged causing misdetection.  By cross checking
-	 * link onlineness and classification result, those conditions
-	 * can be reliably detected and retried.
+	 * link on/offlineness and classification result, those
+	 * conditions can be reliably detected and retried.
 	 */
 	nr_unknown = 0;
 	ata_for_each_dev(dev, link, ALL) {
-		/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
-		if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
-			classes[dev->devno] = ATA_DEV_NONE;
-			if (ata_phys_link_online(ata_dev_phys_link(dev)))
+		if (ata_phys_link_online(ata_dev_phys_link(dev))) {
+			if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+				ata_dev_printk(dev, KERN_DEBUG, "link online "
+					       "but device misclassifed\n");
+				classes[dev->devno] = ATA_DEV_NONE;
 				nr_unknown++;
+			}
+		} else if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
+			if (ata_class_enabled(classes[dev->devno]))
+				ata_dev_printk(dev, KERN_DEBUG, "link offline, "
+					       "clearing class %d to NONE\n",
+					       classes[dev->devno]);
+			classes[dev->devno] = ATA_DEV_NONE;
+		} else if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+			ata_dev_printk(dev, KERN_DEBUG, "link status unknown, "
+				       "clearing UNKNOWN to NONE\n");
+			classes[dev->devno] = ATA_DEV_NONE;
 		}
 	}
 
 	if (classify && nr_unknown) {
 		if (try < max_tries) {
 			ata_link_printk(link, KERN_WARNING, "link online but "
-				       "device misclassified, retrying\n");
+					"%d devices misclassified, retrying\n",
+					nr_unknown);
 			failed_link = link;
 			rc = -EAGAIN;
 			goto fail;
 		}
 		ata_link_printk(link, KERN_WARNING,
-			       "link online but device misclassified, "
-			       "device detection might fail\n");
+				"link online but %d devices misclassified, "
+				"device detection might fail\n", nr_unknown);
 	}
 
 	/* reset successful, schedule revalidation */
@@ -2967,12 +2981,14 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 	 * device detection messages backwards.
 	 */
 	ata_for_each_dev(dev, link, ALL) {
-		if (!(new_mask & (1 << dev->devno)) ||
-		    dev->class == ATA_DEV_PMP)
+		if (!(new_mask & (1 << dev->devno)))
 			continue;
 
 		dev->class = ehc->classes[dev->devno];
 
+		if (dev->class == ATA_DEV_PMP)
+			continue;
+
 		ehc->i.flags |= ATA_EHI_PRINTINFO;
 		rc = ata_dev_configure(dev);
 		ehc->i.flags &= ~ATA_EHI_PRINTINFO;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index be8e2628f82c..823e63096362 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -118,6 +118,8 @@ extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
 
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
+extern unsigned int ata_acpi_gtf_filter;
+
 extern void ata_acpi_associate_sata_port(struct ata_port *ap);
 extern void ata_acpi_associate(struct ata_host *host);
 extern void ata_acpi_dissociate(struct ata_host *host);
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index fc9c5d6d7d80..1432dc9d0ab8 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -290,7 +290,7 @@ static void ali_warn_atapi_dma(struct ata_device *adev)
 
 	if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
 		ata_dev_printk(adev, KERN_WARNING,
-			       "WARNING: ATAPI DMA disabled for reliablity issues.  It can be enabled\n");
+			       "WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled\n");
 		ata_dev_printk(adev, KERN_WARNING,
 			       "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
 	}
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index aa4b3f6ae771..ae4454d4e955 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -246,7 +246,7 @@ static const struct pci_device_id atiixp[] = {
 	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
 	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
 	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
-	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
 
 	{ },
 };
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index 7990de925d2e..6fe7ded40c6a 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -118,20 +118,13 @@ struct atp867x_priv {
 	int		pci66mhz;
 };
 
-static inline u8 atp867x_speed_to_mode(u8 speed)
-{
-	return speed - XFER_UDMA_0 + 1;
-}
-
 static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
 	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
 	struct atp867x_priv *dp = ap->private_data;
 	u8 speed = adev->dma_mode;
 	u8 b;
-	u8 mode;
-
-	mode = atp867x_speed_to_mode(speed);
+	u8 mode = speed - XFER_UDMA_0 + 1;
 
 	/*
 	 * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
@@ -156,25 +149,38 @@ static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	iowrite8(b, dp->dma_mode);
 }
 
-static int atp867x_get_active_clocks_shifted(unsigned int clk)
+static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
+	unsigned int clk)
 {
+	struct atp867x_priv *dp = ap->private_data;
 	unsigned char clocks = clk;
 
+	/*
+	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
+	 * on 66MHz bus
+	 */
+	if (dp->pci66mhz)
+		clocks++;
+
 	switch (clocks) {
 	case 0:
 		clocks = 1;
 		break;
-	case 1 ... 7:
-		break;
-	case 8 ... 12:
-		clocks = 7;
+	case 1 ... 6:
 		break;
 	default:
 		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
-			"Using default 8clk.\n", clk);
-		clocks = 0;	/* 8 clk */
+			"Using 12clk.\n", clk);
+	case 9 ... 12:
+		clocks = 7;	/* 12 clk */
 		break;
+	case 7:
+	case 8:	/* default 8 clk */
+		clocks = 0;
+		goto active_clock_shift_done;
 	}
+
+active_clock_shift_done:
 	return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
 }
 
@@ -188,20 +194,20 @@ static int atp867x_get_recover_clocks_shifted(unsigned int clk)
 		break;
 	case 1 ... 11:
 		break;
-	case 12:
-		clocks = 0;
-		break;
-	case 13: case 14:
-		--clocks;
+	case 13:
+	case 14:
+		--clocks;	/* by the spec */
 		break;
 	case 15:
 		break;
 	default:
 		printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
-			"Using default 15clk.\n", clk);
-		clocks = 0;	/* 12 clk */
+			"Using default 12clk.\n", clk);
+	case 12:	/* default 12 clk */
+		clocks = 0;
 		break;
 	}
+
 	return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
 }
 
@@ -230,25 +236,38 @@ static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
 	iowrite8(b, dp->dma_mode);
 
-	b = atp867x_get_active_clocks_shifted(t.active) |
-		atp867x_get_recover_clocks_shifted(t.recover);
-	if (dp->pci66mhz)
-		b += 0x10;
+	b = atp867x_get_active_clocks_shifted(ap, t.active) |
+	    atp867x_get_recover_clocks_shifted(t.recover);
 
 	if (adev->devno & 1)
 		iowrite8(b, dp->slave_piospd);
 	else
 		iowrite8(b, dp->mstr_piospd);
 
-	/*
-	 * use the same value for comand timing as for PIO timimg
-	 */
+	b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
+	    atp867x_get_recover_clocks_shifted(t.rec8b);
+
 	iowrite8(b, dp->eightb_piospd);
 }
 
+static int atp867x_cable_override(struct pci_dev *pdev)
+{
+	if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
+		(pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
+		 pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
+		return 1;
+	}
+	return 0;
+}
+
 static int atp867x_cable_detect(struct ata_port *ap)
 {
-	return ATA_CBL_PATA40_SHORT;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (atp867x_cable_override(pdev))
+		return ATA_CBL_PATA40_SHORT;
+
+	return ATA_CBL_PATA_UNK;
 }
 
 static struct scsi_host_template atp867x_sht = {
@@ -471,7 +490,6 @@ static int atp867x_init_one(struct pci_dev *pdev,
 	static const struct ata_port_info info_867x = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA6,
 		.port_ops	= &atp867x_ops,
 	};
@@ -515,6 +533,23 @@ err_out:
 	return rc;
 }
 
+#ifdef CONFIG_PM
+static int atp867x_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
+	atp867x_fixup(host);
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
 static struct pci_device_id atp867x_pci_tbl[] = {
 	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A),	0 },
 	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B),	0 },
@@ -526,6 +561,10 @@ static struct pci_driver atp867x_driver = {
 	.id_table 	= atp867x_pci_tbl,
 	.probe 		= atp867x_init_one,
 	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+	.resume		= atp867x_reinit_one,
+#endif
 };
 
 static int __init atp867x_init(void)
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index f49814d6fd2e..3bbed8322ecf 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -235,8 +235,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA2,
 		.port_ops = &sc1200_port_ops
 	};
-	/* Can't enable port 2 yet, see top comments */
-	const struct ata_port_info *ppi[] = { &info, };
+	const struct ata_port_info *ppi[] = { &info, NULL };
 
 	return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
 }
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 45657cacec43..88984b803d6d 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -111,7 +111,7 @@ static const struct via_isa_bridge {
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
-	{ "vt6415",	PCI_DEVICE_ID_VIA_6415,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
+	{ "vt6415",	PCI_DEVICE_ID_VIA_6415,     0x00, 0xff, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
 	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 17f9ff9067a2..6f5093b7c8c5 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1382,6 +1382,25 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
 	 */
 	if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
 		return ATA_DEFER_PORT;
+
+	/* PIO commands need exclusive link: no other commands [DMA or PIO]
+	 * can run concurrently.
+	 * set excl_link when we want to send a PIO command in DMA mode
+	 * or a non-NCQ command in NCQ mode.
+	 * When we receive a command from that link, and there are no
+	 * outstanding commands, mark a flag to clear excl_link and let
+	 * the command go through.
+	 */
+	if (unlikely(ap->excl_link)) {
+		if (link == ap->excl_link) {
+			if (ap->nr_active_links)
+				return ATA_DEFER_PORT;
+			qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
+			return 0;
+		} else
+			return ATA_DEFER_PORT;
+	}
+
 	/*
 	 * If the port is completely idle, then allow the new qc.
 	 */
@@ -1395,8 +1414,14 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
 	 * doesn't allow it.
 	 */
 	if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
-	    (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
-		return 0;
+	    (pp->pp_flags & MV_PP_FLAG_NCQ_EN)) {
+		if (ata_is_ncq(qc->tf.protocol))
+			return 0;
+		else {
+			ap->excl_link = link;
+			return ATA_DEFER_PORT;
+		}
+	}
 
 	return ATA_DEFER_PORT;
 }
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 86a40582999c..1eb4e020eb5c 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1594,9 +1594,21 @@ static int nv_hardreset(struct ata_link *link, unsigned int *class,
 	    !ata_dev_enabled(link->device))
 		sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
 				    NULL, NULL);
-	else if (!(ehc->i.flags & ATA_EHI_QUIET))
-		ata_link_printk(link, KERN_INFO,
-				"nv: skipping hardreset on occupied port\n");
+	else {
+		const unsigned long *timing = sata_ehc_deb_timing(ehc);
+		int rc;
+
+		if (!(ehc->i.flags & ATA_EHI_QUIET))
+			ata_link_printk(link, KERN_INFO, "nv: skipping "
+					"hardreset on occupied port\n");
+
+		/* make sure the link is online */
+		rc = sata_link_resume(link, timing, deadline);
+		/* whine about phy resume failure but proceed */
+		if (rc && rc != -EOPNOTSUPP)
+			ata_link_printk(link, KERN_WARNING, "failed to resume "
+					"link (errno=%d)\n", rc);
+	}
 
 	/* device signature acquisition is unreliable */
 	return -EAGAIN;
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index 703364b52170..66e181345b3a 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -1306,14 +1306,6 @@ static void amb_close (struct atm_vcc * atm_vcc) {
   return;
 }
 
-/********** Set socket options for a VC **********/
-
-// int amb_getsockopt (struct atm_vcc * atm_vcc, int level, int optname, void * optval, int optlen);
-
-/********** Set socket options for a VC **********/
-
-// int amb_setsockopt (struct atm_vcc * atm_vcc, int level, int optname, void * optval, int optlen);
-
 /********** Send **********/
 
 static int amb_send (struct atm_vcc * atm_vcc, struct sk_buff * skb) {
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 5503bfc8e132..0c3026145443 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -2031,7 +2031,7 @@ static int eni_getsockopt(struct atm_vcc *vcc,int level,int optname,
 
 
 static int eni_setsockopt(struct atm_vcc *vcc,int level,int optname,
-    void __user *optval,int optlen)
+    void __user *optval,unsigned int optlen)
 {
 	return -EINVAL;
 }
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index b119640e1ee9..cd5049af47a9 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1244,7 +1244,7 @@ static int fs_getsockopt(struct atm_vcc *vcc,int level,int optname,
 
 
 static int fs_setsockopt(struct atm_vcc *vcc,int level,int optname,
-			 void __user *optval,int optlen)
+			 void __user *optval,unsigned int optlen)
 {
 	func_enter ();
 	func_exit ();
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index 10f000dbe448..f766cc46b4c4 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -1795,7 +1795,7 @@ fore200e_getsockopt(struct atm_vcc* vcc, int level, int optname, void __user *op
 
 
 static int
-fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, int optlen)
+fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, unsigned int optlen)
 {
     /* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */
     
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 29e66d603d3c..70667033a568 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -921,9 +921,9 @@ out_free_rbpq_base:
 			he_dev->rbrq_phys);
 	i = CONFIG_RBPL_SIZE;
 out_free_rbpl_virt:
-	while (--i)
-		pci_pool_free(he_dev->rbps_pool, he_dev->rbpl_virt[i].virt,
-				he_dev->rbps_base[i].phys);
+	while (i--)
+		pci_pool_free(he_dev->rbpl_pool, he_dev->rbpl_virt[i].virt,
+				he_dev->rbpl_base[i].phys);
 	kfree(he_dev->rbpl_virt);
 
 out_free_rbpl_base:
@@ -933,11 +933,11 @@ out_free_rbpl_base:
 out_destroy_rbpl_pool:
 	pci_pool_destroy(he_dev->rbpl_pool);
 
-	i = CONFIG_RBPL_SIZE;
+	i = CONFIG_RBPS_SIZE;
 out_free_rbps_virt:
-	while (--i)
-		pci_pool_free(he_dev->rbpl_pool, he_dev->rbps_virt[i].virt,
-				he_dev->rbpl_base[i].phys);
+	while (i--)
+		pci_pool_free(he_dev->rbps_pool, he_dev->rbps_virt[i].virt,
+				he_dev->rbps_base[i].phys);
 	kfree(he_dev->rbps_virt);
 
 out_free_rbps_base:
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index 01ce241dbeae..4e49021e67ee 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -2590,7 +2590,7 @@ static int hrz_getsockopt (struct atm_vcc * atm_vcc, int level, int optname,
 }
 
 static int hrz_setsockopt (struct atm_vcc * atm_vcc, int level, int optname,
-			   void *optval, int optlen) {
+			   void *optval, unsigned int optlen) {
   hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
   PRINTD (DBG_FLOW|DBG_VCC, "hrz_setsockopt");
   switch (level) {
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 78c9736c3579..b2c1b37ab2e4 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2862,7 +2862,7 @@ static int ia_getsockopt(struct atm_vcc *vcc, int level, int optname,
 }  
   
 static int ia_setsockopt(struct atm_vcc *vcc, int level, int optname,   
-	void __user *optval, int optlen)  
+	void __user *optval, unsigned int optlen)  
 {  
 	IF_EVENT(printk(">ia_setsockopt\n");)  
 	return -EINVAL;  
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 752b1ba81f7e..2e9635be048c 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -1517,7 +1517,7 @@ static int zatm_getsockopt(struct atm_vcc *vcc,int level,int optname,
 
 
 static int zatm_setsockopt(struct atm_vcc *vcc,int level,int optname,
-    void __user *optval,int optlen)
+    void __user *optval,unsigned int optlen)
 {
 	return -EINVAL;
 }
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 6fa7b0fdbdfd..eb4fa1943944 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -38,6 +38,7 @@
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/reboot.h>
 #include <linux/spinlock.h>
 #include <linux/timer.h>
@@ -6422,16 +6423,10 @@ static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
   return true;
 }
 
-
-/*
-  DAC960_ProcReadStatus implements reading /proc/rd/status.
-*/
-
-static int DAC960_ProcReadStatus(char *Page, char **Start, off_t Offset,
-				 int Count, int *EOF, void *Data)
+static int dac960_proc_show(struct seq_file *m, void *v)
 {
   unsigned char *StatusMessage = "OK\n";
-  int ControllerNumber, BytesAvailable;
+  int ControllerNumber;
   for (ControllerNumber = 0;
        ControllerNumber < DAC960_ControllerCount;
        ControllerNumber++)
@@ -6444,52 +6439,49 @@ static int DAC960_ProcReadStatus(char *Page, char **Start, off_t Offset,
 	  break;
 	}
     }
-  BytesAvailable = strlen(StatusMessage) - Offset;
-  if (Count >= BytesAvailable)
-    {
-      Count = BytesAvailable;
-      *EOF = true;
-    }
-  if (Count <= 0) return 0;
-  *Start = Page;
-  memcpy(Page, &StatusMessage[Offset], Count);
-  return Count;
+  seq_puts(m, StatusMessage);
+  return 0;
 }
 
+static int dac960_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dac960_proc_show, NULL);
+}
 
-/*
-  DAC960_ProcReadInitialStatus implements reading /proc/rd/cN/initial_status.
-*/
+static const struct file_operations dac960_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dac960_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 
-static int DAC960_ProcReadInitialStatus(char *Page, char **Start, off_t Offset,
-					int Count, int *EOF, void *Data)
+static int dac960_initial_status_proc_show(struct seq_file *m, void *v)
 {
-  DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
-  int BytesAvailable = Controller->InitialStatusLength - Offset;
-  if (Count >= BytesAvailable)
-    {
-      Count = BytesAvailable;
-      *EOF = true;
-    }
-  if (Count <= 0) return 0;
-  *Start = Page;
-  memcpy(Page, &Controller->CombinedStatusBuffer[Offset], Count);
-  return Count;
+	DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
+	seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
+	return 0;
 }
 
+static int dac960_initial_status_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dac960_initial_status_proc_show, PDE(inode)->data);
+}
 
-/*
-  DAC960_ProcReadCurrentStatus implements reading /proc/rd/cN/current_status.
-*/
+static const struct file_operations dac960_initial_status_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dac960_initial_status_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 
-static int DAC960_ProcReadCurrentStatus(char *Page, char **Start, off_t Offset,
-					int Count, int *EOF, void *Data)
+static int dac960_current_status_proc_show(struct seq_file *m, void *v)
 {
-  DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
+  DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
   unsigned char *StatusMessage =
     "No Rebuild or Consistency Check in Progress\n";
   int ProgressMessageLength = strlen(StatusMessage);
-  int BytesAvailable;
   if (jiffies != Controller->LastCurrentStatusTime)
     {
       Controller->CurrentStatusLength = 0;
@@ -6513,49 +6505,41 @@ static int DAC960_ProcReadCurrentStatus(char *Page, char **Start, off_t Offset,
 	}
       Controller->LastCurrentStatusTime = jiffies;
     }
-  BytesAvailable = Controller->CurrentStatusLength - Offset;
-  if (Count >= BytesAvailable)
-    {
-      Count = BytesAvailable;
-      *EOF = true;
-    }
-  if (Count <= 0) return 0;
-  *Start = Page;
-  memcpy(Page, &Controller->CurrentStatusBuffer[Offset], Count);
-  return Count;
+	seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
+	return 0;
 }
 
+static int dac960_current_status_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dac960_current_status_proc_show, PDE(inode)->data);
+}
 
-/*
-  DAC960_ProcReadUserCommand implements reading /proc/rd/cN/user_command.
-*/
+static const struct file_operations dac960_current_status_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dac960_current_status_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 
-static int DAC960_ProcReadUserCommand(char *Page, char **Start, off_t Offset,
-				      int Count, int *EOF, void *Data)
+static int dac960_user_command_proc_show(struct seq_file *m, void *v)
 {
-  DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
-  int BytesAvailable = Controller->UserStatusLength - Offset;
-  if (Count >= BytesAvailable)
-    {
-      Count = BytesAvailable;
-      *EOF = true;
-    }
-  if (Count <= 0) return 0;
-  *Start = Page;
-  memcpy(Page, &Controller->UserStatusBuffer[Offset], Count);
-  return Count;
-}
+	DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
 
+	seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
+	return 0;
+}
 
-/*
-  DAC960_ProcWriteUserCommand implements writing /proc/rd/cN/user_command.
-*/
+static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dac960_user_command_proc_show, PDE(inode)->data);
+}
 
-static int DAC960_ProcWriteUserCommand(struct file *file,
+static ssize_t dac960_user_command_proc_write(struct file *file,
 				       const char __user *Buffer,
-				       unsigned long Count, void *Data)
+				       size_t Count, loff_t *pos)
 {
-  DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
+  DAC960_Controller_T *Controller = (DAC960_Controller_T *) PDE(file->f_path.dentry->d_inode)->data;
   unsigned char CommandBuffer[80];
   int Length;
   if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
@@ -6572,6 +6556,14 @@ static int DAC960_ProcWriteUserCommand(struct file *file,
 	    ? Count : -EBUSY);
 }
 
+static const struct file_operations dac960_user_command_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dac960_user_command_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= dac960_user_command_proc_write,
+};
 
 /*
   DAC960_CreateProcEntries creates the /proc/rd/... entries for the
@@ -6586,23 +6578,17 @@ static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
 
 	if (DAC960_ProcDirectoryEntry == NULL) {
   		DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
-  		StatusProcEntry = create_proc_read_entry("status", 0,
+  		StatusProcEntry = proc_create("status", 0,
 					   DAC960_ProcDirectoryEntry,
-					   DAC960_ProcReadStatus, NULL);
+					   &dac960_proc_fops);
 	}
 
       sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
       ControllerProcEntry = proc_mkdir(Controller->ControllerName,
 				       DAC960_ProcDirectoryEntry);
-      create_proc_read_entry("initial_status", 0, ControllerProcEntry,
-			     DAC960_ProcReadInitialStatus, Controller);
-      create_proc_read_entry("current_status", 0, ControllerProcEntry,
-			     DAC960_ProcReadCurrentStatus, Controller);
-      UserCommandProcEntry =
-	create_proc_read_entry("user_command", S_IWUSR | S_IRUSR,
-			       ControllerProcEntry, DAC960_ProcReadUserCommand,
-			       Controller);
-      UserCommandProcEntry->write_proc = DAC960_ProcWriteUserCommand;
+      proc_create_data("initial_status", 0, ControllerProcEntry, &dac960_initial_status_proc_fops, Controller);
+      proc_create_data("current_status", 0, ControllerProcEntry, &dac960_current_status_proc_fops, Controller);
+      UserCommandProcEntry = proc_create_data("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
       Controller->ControllerProcEntry = ControllerProcEntry;
 }
 
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 24c3e21ab263..6399e5090df4 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -36,9 +36,11 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
+#include <linux/jiffies.h>
 #include <linux/hdreg.h>
 #include <linux/spinlock.h>
 #include <linux/compat.h>
+#include <linux/mutex.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
@@ -66,6 +68,12 @@ MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
 MODULE_VERSION("3.6.20");
 MODULE_LICENSE("GPL");
 
+static int cciss_allow_hpsa;
+module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cciss_allow_hpsa,
+	"Prevent cciss driver from accessing hardware known to be "
+	" supported by the hpsa driver");
+
 #include "cciss_cmd.h"
 #include "cciss.h"
 #include <linux/cciss_ioctl.h>
@@ -99,8 +107,6 @@ static const struct pci_device_id cciss_pci_device_id[] = {
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3249},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324A},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324B},
-	{PCI_VENDOR_ID_HP,     PCI_ANY_ID,	PCI_ANY_ID, PCI_ANY_ID,
-		PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
 	{0,}
 };
 
@@ -121,8 +127,6 @@ static struct board_type products[] = {
 	{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
 	{0x40910E11, "Smart Array 6i", &SA5_access},
 	{0x3225103C, "Smart Array P600", &SA5_access},
-	{0x3223103C, "Smart Array P800", &SA5_access},
-	{0x3234103C, "Smart Array P400", &SA5_access},
 	{0x3235103C, "Smart Array P400i", &SA5_access},
 	{0x3211103C, "Smart Array E200i", &SA5_access},
 	{0x3212103C, "Smart Array E200", &SA5_access},
@@ -130,6 +134,10 @@ static struct board_type products[] = {
 	{0x3214103C, "Smart Array E200i", &SA5_access},
 	{0x3215103C, "Smart Array E200i", &SA5_access},
 	{0x3237103C, "Smart Array E500", &SA5_access},
+/* controllers below this line are also supported by the hpsa driver. */
+#define HPSA_BOUNDARY 0x3223103C
+	{0x3223103C, "Smart Array P800", &SA5_access},
+	{0x3234103C, "Smart Array P400", &SA5_access},
 	{0x323D103C, "Smart Array P700m", &SA5_access},
 	{0x3241103C, "Smart Array P212", &SA5_access},
 	{0x3243103C, "Smart Array P410", &SA5_access},
@@ -138,7 +146,6 @@ static struct board_type products[] = {
 	{0x3249103C, "Smart Array P812", &SA5_access},
 	{0x324A103C, "Smart Array P712m", &SA5_access},
 	{0x324B103C, "Smart Array P711m", &SA5_access},
-	{0xFFFF103C, "Unknown Smart Array", &SA5_access},
 };
 
 /* How long to wait (in milliseconds) for board to go into simple mode */
@@ -155,6 +162,10 @@ static struct board_type products[] = {
 
 static ctlr_info_t *hba[MAX_CTLR];
 
+static struct task_struct *cciss_scan_thread;
+static DEFINE_MUTEX(scan_mutex);
+static LIST_HEAD(scan_q);
+
 static void do_cciss_request(struct request_queue *q);
 static irqreturn_t do_cciss_intr(int irq, void *dev_id);
 static int cciss_open(struct block_device *bdev, fmode_t mode);
@@ -164,9 +175,9 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
 static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, int first_time);
+static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl);
 static int deregister_disk(ctlr_info_t *h, int drv_index,
-			   int clear_all);
+			   int clear_all, int via_ioctl);
 
 static void cciss_read_capacity(int ctlr, int logvol, int withirq,
 			sector_t *total_size, unsigned int *block_size);
@@ -189,8 +200,13 @@ static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
 static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
 
 static void fail_all_cmds(unsigned long ctlr);
+static int add_to_scan_list(struct ctlr_info *h);
 static int scan_thread(void *data);
 static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
+static void cciss_hba_release(struct device *dev);
+static void cciss_device_release(struct device *dev);
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
+static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
 
 #ifdef CONFIG_PROC_FS
 static void cciss_procinit(int i);
@@ -245,7 +261,10 @@ static inline void removeQ(CommandList_struct *c)
 
 #include "cciss_scsi.c"		/* For SCSI tape support */
 
-#define RAID_UNKNOWN 6
+static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
+	"UNKNOWN"
+};
+#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
 
 #ifdef CONFIG_PROC_FS
 
@@ -255,9 +274,6 @@ static inline void removeQ(CommandList_struct *c)
 #define ENG_GIG 1000000000
 #define ENG_GIG_FACTOR (ENG_GIG/512)
 #define ENGAGE_SCSI	"engage scsi"
-static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
-	"UNKNOWN"
-};
 
 static struct proc_dir_entry *proc_cciss;
 
@@ -318,7 +334,7 @@ static int cciss_seq_show(struct seq_file *seq, void *v)
 	ctlr_info_t *h = seq->private;
 	unsigned ctlr = h->ctlr;
 	loff_t *pos = v;
-	drive_info_struct *drv = &h->drv[*pos];
+	drive_info_struct *drv = h->drv[*pos];
 
 	if (*pos > h->highest_lun)
 		return 0;
@@ -331,7 +347,7 @@ static int cciss_seq_show(struct seq_file *seq, void *v)
 	vol_sz_frac *= 100;
 	sector_div(vol_sz_frac, ENG_GIG_FACTOR);
 
-	if (drv->raid_level > 5)
+	if (drv->raid_level < 0 || drv->raid_level > RAID_UNKNOWN)
 		drv->raid_level = RAID_UNKNOWN;
 	seq_printf(seq, "cciss/c%dd%d:"
 			"\t%4u.%02uGB\tRAID %s\n",
@@ -426,7 +442,7 @@ out:
 	return err;
 }
 
-static struct file_operations cciss_proc_fops = {
+static const struct file_operations cciss_proc_fops = {
 	.owner	 = THIS_MODULE,
 	.open    = cciss_seq_open,
 	.read    = seq_read,
@@ -454,9 +470,19 @@ static void __devinit cciss_procinit(int i)
 #define to_hba(n) container_of(n, struct ctlr_info, dev)
 #define to_drv(n) container_of(n, drive_info_struct, dev)
 
-static struct device_type cciss_host_type = {
-	.name		= "cciss_host",
-};
+static ssize_t host_store_rescan(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct ctlr_info *h = to_hba(dev);
+
+	add_to_scan_list(h);
+	wake_up_process(cciss_scan_thread);
+	wait_for_completion_interruptible(&h->scan_wait);
+
+	return count;
+}
+DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
 
 static ssize_t dev_show_unique_id(struct device *dev,
 				 struct device_attribute *attr,
@@ -560,11 +586,101 @@ static ssize_t dev_show_rev(struct device *dev,
 }
 DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
 
+static ssize_t cciss_show_lunid(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	unsigned long flags;
+	unsigned char lunid[8];
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring) {
+		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+		return -EBUSY;
+	}
+	if (!drv->heads) {
+		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+		return -ENOTTY;
+	}
+	memcpy(lunid, drv->LunID, sizeof(lunid));
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+	return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+		lunid[0], lunid[1], lunid[2], lunid[3],
+		lunid[4], lunid[5], lunid[6], lunid[7]);
+}
+DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
+
+static ssize_t cciss_show_raid_level(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	int raid;
+	unsigned long flags;
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring) {
+		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+		return -EBUSY;
+	}
+	raid = drv->raid_level;
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+	if (raid < 0 || raid > RAID_UNKNOWN)
+		raid = RAID_UNKNOWN;
+
+	return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n",
+			raid_label[raid]);
+}
+DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
+
+static ssize_t cciss_show_usage_count(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	unsigned long flags;
+	int count;
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring) {
+		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+		return -EBUSY;
+	}
+	count = drv->usage_count;
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+	return snprintf(buf, 20, "%d\n", count);
+}
+DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
+
+static struct attribute *cciss_host_attrs[] = {
+	&dev_attr_rescan.attr,
+	NULL
+};
+
+static struct attribute_group cciss_host_attr_group = {
+	.attrs = cciss_host_attrs,
+};
+
+static const struct attribute_group *cciss_host_attr_groups[] = {
+	&cciss_host_attr_group,
+	NULL
+};
+
+static struct device_type cciss_host_type = {
+	.name		= "cciss_host",
+	.groups		= cciss_host_attr_groups,
+	.release	= cciss_hba_release,
+};
+
 static struct attribute *cciss_dev_attrs[] = {
 	&dev_attr_unique_id.attr,
 	&dev_attr_model.attr,
 	&dev_attr_vendor.attr,
 	&dev_attr_rev.attr,
+	&dev_attr_lunid.attr,
+	&dev_attr_raid_level.attr,
+	&dev_attr_usage_count.attr,
 	NULL
 };
 
@@ -580,12 +696,24 @@ static const struct attribute_group *cciss_dev_attr_groups[] = {
 static struct device_type cciss_dev_type = {
 	.name		= "cciss_device",
 	.groups		= cciss_dev_attr_groups,
+	.release	= cciss_device_release,
 };
 
 static struct bus_type cciss_bus_type = {
 	.name		= "cciss",
 };
 
+/*
+ * cciss_hba_release is called when the reference count
+ * of h->dev goes to zero.
+ */
+static void cciss_hba_release(struct device *dev)
+{
+	/*
+	 * nothing to do, but need this to avoid a warning
+	 * about not having a release handler from lib/kref.c.
+	 */
+}
 
 /*
  * Initialize sysfs entry for each controller.  This sets up and registers
@@ -609,6 +737,16 @@ static int cciss_create_hba_sysfs_entry(struct ctlr_info *h)
 static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h)
 {
 	device_del(&h->dev);
+	put_device(&h->dev); /* final put. */
+}
+
+/* cciss_device_release is called when the reference count
+ * of h->drv[x]dev goes to zero.
+ */
+static void cciss_device_release(struct device *dev)
+{
+	drive_info_struct *drv = to_drv(dev);
+	kfree(drv);
 }
 
 /*
@@ -617,24 +755,39 @@ static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h)
  * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
  * /sys/block/cciss!c#d# to this entry.
  */
-static int cciss_create_ld_sysfs_entry(struct ctlr_info *h,
-				       drive_info_struct *drv,
+static long cciss_create_ld_sysfs_entry(struct ctlr_info *h,
 				       int drv_index)
 {
-	device_initialize(&drv->dev);
-	drv->dev.type = &cciss_dev_type;
-	drv->dev.bus = &cciss_bus_type;
-	dev_set_name(&drv->dev, "c%dd%d", h->ctlr, drv_index);
-	drv->dev.parent = &h->dev;
-	return device_add(&drv->dev);
+	struct device *dev;
+
+	if (h->drv[drv_index]->device_initialized)
+		return 0;
+
+	dev = &h->drv[drv_index]->dev;
+	device_initialize(dev);
+	dev->type = &cciss_dev_type;
+	dev->bus = &cciss_bus_type;
+	dev_set_name(dev, "c%dd%d", h->ctlr, drv_index);
+	dev->parent = &h->dev;
+	h->drv[drv_index]->device_initialized = 1;
+	return device_add(dev);
 }
 
 /*
  * Remove sysfs entries for a logical drive.
  */
-static void cciss_destroy_ld_sysfs_entry(drive_info_struct *drv)
+static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index,
+	int ctlr_exiting)
 {
-	device_del(&drv->dev);
+	struct device *dev = &h->drv[drv_index]->dev;
+
+	/* special case for c*d0, we only destroy it on controller exit */
+	if (drv_index == 0 && !ctlr_exiting)
+		return;
+
+	device_del(dev);
+	put_device(dev); /* the "final" put. */
+	h->drv[drv_index] = NULL;
 }
 
 /*
@@ -751,7 +904,7 @@ static int cciss_open(struct block_device *bdev, fmode_t mode)
 	printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
 #endif				/* CCISS_DEBUG */
 
-	if (host->busy_initializing || drv->busy_configuring)
+	if (drv->busy_configuring)
 		return -EBUSY;
 	/*
 	 * Root is allowed to open raw volume zero even if it's not configured
@@ -767,7 +920,8 @@ static int cciss_open(struct block_device *bdev, fmode_t mode)
 			if (MINOR(bdev->bd_dev) & 0x0f) {
 				return -ENXIO;
 				/* if it is, make sure we have a LUN ID */
-			} else if (drv->LunID == 0) {
+			} else if (memcmp(drv->LunID, CTLR_LUNID,
+				sizeof(drv->LunID))) {
 				return -ENXIO;
 			}
 		}
@@ -1132,12 +1286,13 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
 	case CCISS_DEREGDISK:
 	case CCISS_REGNEWD:
 	case CCISS_REVALIDVOLS:
-		return rebuild_lun_table(host, 0);
+		return rebuild_lun_table(host, 0, 1);
 
 	case CCISS_GETLUNINFO:{
 			LogvolInfo_struct luninfo;
 
-			luninfo.LunID = drv->LunID;
+			memcpy(&luninfo.LunID, drv->LunID,
+				sizeof(luninfo.LunID));
 			luninfo.num_opens = drv->usage_count;
 			luninfo.num_parts = 0;
 			if (copy_to_user(argp, &luninfo,
@@ -1475,7 +1630,10 @@ static void cciss_check_queues(ctlr_info_t *h)
 		/* make sure the disk has been added and the drive is real
 		 * because this can be called from the middle of init_one.
 		 */
-		if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads))
+		if (!h->drv[curr_queue])
+			continue;
+		if (!(h->drv[curr_queue]->queue) ||
+			!(h->drv[curr_queue]->heads))
 			continue;
 		blk_start_queue(h->gendisk[curr_queue]->queue);
 
@@ -1532,13 +1690,11 @@ static void cciss_softirq_done(struct request *rq)
 	spin_unlock_irqrestore(&h->lock, flags);
 }
 
-static void log_unit_to_scsi3addr(ctlr_info_t *h, unsigned char scsi3addr[],
-	uint32_t log_unit)
+static inline void log_unit_to_scsi3addr(ctlr_info_t *h,
+	unsigned char scsi3addr[], uint32_t log_unit)
 {
-	log_unit = h->drv[log_unit].LunID & 0x03fff;
-	memset(&scsi3addr[4], 0, 4);
-	memcpy(&scsi3addr[0], &log_unit, 4);
-	scsi3addr[3] |= 0x40;
+	memcpy(scsi3addr, h->drv[log_unit]->LunID,
+		sizeof(h->drv[log_unit]->LunID));
 }
 
 /* This function gets the SCSI vendor, model, and revision of a logical drive
@@ -1615,16 +1771,23 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
 	return;
 }
 
-static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
+/*
+ * cciss_add_disk sets up the block device queue for a logical drive
+ */
+static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
 				int drv_index)
 {
 	disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+	if (!disk->queue)
+		goto init_queue_failure;
 	sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
 	disk->major = h->major;
 	disk->first_minor = drv_index << NWD_SHIFT;
 	disk->fops = &cciss_fops;
-	disk->private_data = &h->drv[drv_index];
-	disk->driverfs_dev = &h->drv[drv_index].dev;
+	if (cciss_create_ld_sysfs_entry(h, drv_index))
+		goto cleanup_queue;
+	disk->private_data = h->drv[drv_index];
+	disk->driverfs_dev = &h->drv[drv_index]->dev;
 
 	/* Set up queue information */
 	blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
@@ -1642,14 +1805,21 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
 	disk->queue->queuedata = h;
 
 	blk_queue_logical_block_size(disk->queue,
-				     h->drv[drv_index].block_size);
+				     h->drv[drv_index]->block_size);
 
 	/* Make sure all queue data is written out before */
-	/* setting h->drv[drv_index].queue, as setting this */
+	/* setting h->drv[drv_index]->queue, as setting this */
 	/* allows the interrupt handler to start the queue */
 	wmb();
-	h->drv[drv_index].queue = disk->queue;
+	h->drv[drv_index]->queue = disk->queue;
 	add_disk(disk);
+	return 0;
+
+cleanup_queue:
+	blk_cleanup_queue(disk->queue);
+	disk->queue = NULL;
+init_queue_failure:
+	return -1;
 }
 
 /* This function will check the usage_count of the drive to be updated/added.
@@ -1662,7 +1832,8 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
  * is also the controller node.  Any changes to disk 0 will show up on
  * the next reboot.
  */
-static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
+static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
+	int via_ioctl)
 {
 	ctlr_info_t *h = hba[ctlr];
 	struct gendisk *disk;
@@ -1672,21 +1843,13 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 	unsigned long flags = 0;
 	int ret = 0;
 	drive_info_struct *drvinfo;
-	int was_only_controller_node;
 
 	/* Get information about the disk and modify the driver structure */
 	inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
-	drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL);
+	drvinfo = kzalloc(sizeof(*drvinfo), GFP_KERNEL);
 	if (inq_buff == NULL || drvinfo == NULL)
 		goto mem_msg;
 
-	/* See if we're trying to update the "controller node"
-	 * this will happen the when the first logical drive gets
-	 * created by ACU.
-	 */
-	was_only_controller_node = (drv_index == 0 &&
-				h->drv[0].raid_level == -1);
-
 	/* testing to see if 16-byte CDBs are already being used */
 	if (h->cciss_read == CCISS_READ_16) {
 		cciss_read_capacity_16(h->ctlr, drv_index, 1,
@@ -1719,16 +1882,19 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 				drvinfo->model, drvinfo->rev);
 	cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
 			sizeof(drvinfo->serial_no));
+	/* Save the lunid in case we deregister the disk, below. */
+	memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
+		sizeof(drvinfo->LunID));
 
 	/* Is it the same disk we already know, and nothing's changed? */
-	if (h->drv[drv_index].raid_level != -1 &&
+	if (h->drv[drv_index]->raid_level != -1 &&
 		((memcmp(drvinfo->serial_no,
-				h->drv[drv_index].serial_no, 16) == 0) &&
-		drvinfo->block_size == h->drv[drv_index].block_size &&
-		drvinfo->nr_blocks == h->drv[drv_index].nr_blocks &&
-		drvinfo->heads == h->drv[drv_index].heads &&
-		drvinfo->sectors == h->drv[drv_index].sectors &&
-		drvinfo->cylinders == h->drv[drv_index].cylinders))
+				h->drv[drv_index]->serial_no, 16) == 0) &&
+		drvinfo->block_size == h->drv[drv_index]->block_size &&
+		drvinfo->nr_blocks == h->drv[drv_index]->nr_blocks &&
+		drvinfo->heads == h->drv[drv_index]->heads &&
+		drvinfo->sectors == h->drv[drv_index]->sectors &&
+		drvinfo->cylinders == h->drv[drv_index]->cylinders))
 			/* The disk is unchanged, nothing to update */
 			goto freeret;
 
@@ -1738,18 +1904,17 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 	 * If the disk already exists then deregister it before proceeding
 	 * (unless it's the first disk (for the controller node).
 	 */
-	if (h->drv[drv_index].raid_level != -1 && drv_index != 0) {
+	if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
 		printk(KERN_WARNING "disk %d has changed.\n", drv_index);
 		spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
-		h->drv[drv_index].busy_configuring = 1;
+		h->drv[drv_index]->busy_configuring = 1;
 		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 
-		/* deregister_disk sets h->drv[drv_index].queue = NULL
+		/* deregister_disk sets h->drv[drv_index]->queue = NULL
 		 * which keeps the interrupt handler from starting
 		 * the queue.
 		 */
-		ret = deregister_disk(h, drv_index, 0);
-		h->drv[drv_index].busy_configuring = 0;
+		ret = deregister_disk(h, drv_index, 0, via_ioctl);
 	}
 
 	/* If the disk is in use return */
@@ -1757,22 +1922,31 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 		goto freeret;
 
 	/* Save the new information from cciss_geometry_inquiry
-	 * and serial number inquiry.
+	 * and serial number inquiry.  If the disk was deregistered
+	 * above, then h->drv[drv_index] will be NULL.
 	 */
-	h->drv[drv_index].block_size = drvinfo->block_size;
-	h->drv[drv_index].nr_blocks = drvinfo->nr_blocks;
-	h->drv[drv_index].heads = drvinfo->heads;
-	h->drv[drv_index].sectors = drvinfo->sectors;
-	h->drv[drv_index].cylinders = drvinfo->cylinders;
-	h->drv[drv_index].raid_level = drvinfo->raid_level;
-	memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
-	memcpy(h->drv[drv_index].vendor, drvinfo->vendor, VENDOR_LEN + 1);
-	memcpy(h->drv[drv_index].model, drvinfo->model, MODEL_LEN + 1);
-	memcpy(h->drv[drv_index].rev, drvinfo->rev, REV_LEN + 1);
+	if (h->drv[drv_index] == NULL) {
+		drvinfo->device_initialized = 0;
+		h->drv[drv_index] = drvinfo;
+		drvinfo = NULL; /* so it won't be freed below. */
+	} else {
+		/* special case for cxd0 */
+		h->drv[drv_index]->block_size = drvinfo->block_size;
+		h->drv[drv_index]->nr_blocks = drvinfo->nr_blocks;
+		h->drv[drv_index]->heads = drvinfo->heads;
+		h->drv[drv_index]->sectors = drvinfo->sectors;
+		h->drv[drv_index]->cylinders = drvinfo->cylinders;
+		h->drv[drv_index]->raid_level = drvinfo->raid_level;
+		memcpy(h->drv[drv_index]->serial_no, drvinfo->serial_no, 16);
+		memcpy(h->drv[drv_index]->vendor, drvinfo->vendor,
+			VENDOR_LEN + 1);
+		memcpy(h->drv[drv_index]->model, drvinfo->model, MODEL_LEN + 1);
+		memcpy(h->drv[drv_index]->rev, drvinfo->rev, REV_LEN + 1);
+	}
 
 	++h->num_luns;
 	disk = h->gendisk[drv_index];
-	set_capacity(disk, h->drv[drv_index].nr_blocks);
+	set_capacity(disk, h->drv[drv_index]->nr_blocks);
 
 	/* If it's not disk 0 (drv_index != 0)
 	 * or if it was disk 0, but there was previously
@@ -1780,8 +1954,15 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 	 * (raid_leve == -1) then we want to update the
 	 * logical drive's information.
 	 */
-	if (drv_index || first_time)
-		cciss_add_disk(h, disk, drv_index);
+	if (drv_index || first_time) {
+		if (cciss_add_disk(h, disk, drv_index) != 0) {
+			cciss_free_gendisk(h, drv_index);
+			cciss_free_drive_info(h, drv_index);
+			printk(KERN_WARNING "cciss:%d could not update "
+				"disk %d\n", h->ctlr, drv_index);
+			--h->num_luns;
+		}
+	}
 
 freeret:
 	kfree(inq_buff);
@@ -1793,28 +1974,70 @@ mem_msg:
 }
 
 /* This function will find the first index of the controllers drive array
- * that has a -1 for the raid_level and will return that index.  This is
- * where new drives will be added.  If the index to be returned is greater
- * than the highest_lun index for the controller then highest_lun is set
- * to this new index.  If there are no available indexes then -1 is returned.
- * "controller_node" is used to know if this is a real logical drive, or just
- * the controller node, which determines if this counts towards highest_lun.
+ * that has a null drv pointer and allocate the drive info struct and
+ * will return that index   This is where new drives will be added.
+ * If the index to be returned is greater than the highest_lun index for
+ * the controller then highest_lun is set * to this new index.
+ * If there are no available indexes or if tha allocation fails, then -1
+ * is returned.  * "controller_node" is used to know if this is a real
+ * logical drive, or just the controller node, which determines if this
+ * counts towards highest_lun.
  */
-static int cciss_find_free_drive_index(int ctlr, int controller_node)
+static int cciss_alloc_drive_info(ctlr_info_t *h, int controller_node)
 {
 	int i;
+	drive_info_struct *drv;
 
+	/* Search for an empty slot for our drive info */
 	for (i = 0; i < CISS_MAX_LUN; i++) {
-		if (hba[ctlr]->drv[i].raid_level == -1) {
-			if (i > hba[ctlr]->highest_lun)
-				if (!controller_node)
-					hba[ctlr]->highest_lun = i;
+
+		/* if not cxd0 case, and it's occupied, skip it. */
+		if (h->drv[i] && i != 0)
+			continue;
+		/*
+		 * If it's cxd0 case, and drv is alloc'ed already, and a
+		 * disk is configured there, skip it.
+		 */
+		if (i == 0 && h->drv[i] && h->drv[i]->raid_level != -1)
+			continue;
+
+		/*
+		 * We've found an empty slot.  Update highest_lun
+		 * provided this isn't just the fake cxd0 controller node.
+		 */
+		if (i > h->highest_lun && !controller_node)
+			h->highest_lun = i;
+
+		/* If adding a real disk at cxd0, and it's already alloc'ed */
+		if (i == 0 && h->drv[i] != NULL)
 			return i;
-		}
+
+		/*
+		 * Found an empty slot, not already alloc'ed.  Allocate it.
+		 * Mark it with raid_level == -1, so we know it's new later on.
+		 */
+		drv = kzalloc(sizeof(*drv), GFP_KERNEL);
+		if (!drv)
+			return -1;
+		drv->raid_level = -1; /* so we know it's new */
+		h->drv[i] = drv;
+		return i;
 	}
 	return -1;
 }
 
+static void cciss_free_drive_info(ctlr_info_t *h, int drv_index)
+{
+	kfree(h->drv[drv_index]);
+	h->drv[drv_index] = NULL;
+}
+
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index)
+{
+	put_disk(h->gendisk[drv_index]);
+	h->gendisk[drv_index] = NULL;
+}
+
 /* cciss_add_gendisk finds a free hba[]->drv structure
  * and allocates a gendisk if needed, and sets the lunid
  * in the drvinfo structure.   It returns the index into
@@ -1824,13 +2047,15 @@ static int cciss_find_free_drive_index(int ctlr, int controller_node)
  * a means to talk to the controller in case no logical
  * drives have yet been configured.
  */
-static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
+static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[],
+	int controller_node)
 {
 	int drv_index;
 
-	drv_index = cciss_find_free_drive_index(h->ctlr, controller_node);
+	drv_index = cciss_alloc_drive_info(h, controller_node);
 	if (drv_index == -1)
 		return -1;
+
 	/*Check if the gendisk needs to be allocated */
 	if (!h->gendisk[drv_index]) {
 		h->gendisk[drv_index] =
@@ -1839,23 +2064,24 @@ static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
 			printk(KERN_ERR "cciss%d: could not "
 				"allocate a new disk %d\n",
 				h->ctlr, drv_index);
-			return -1;
+			goto err_free_drive_info;
 		}
 	}
-	h->drv[drv_index].LunID = lunid;
-	if (cciss_create_ld_sysfs_entry(h, &h->drv[drv_index], drv_index))
+	memcpy(h->drv[drv_index]->LunID, lunid,
+		sizeof(h->drv[drv_index]->LunID));
+	if (cciss_create_ld_sysfs_entry(h, drv_index))
 		goto err_free_disk;
-
 	/* Don't need to mark this busy because nobody */
 	/* else knows about this disk yet to contend */
 	/* for access to it. */
-	h->drv[drv_index].busy_configuring = 0;
+	h->drv[drv_index]->busy_configuring = 0;
 	wmb();
 	return drv_index;
 
 err_free_disk:
-	put_disk(h->gendisk[drv_index]);
-	h->gendisk[drv_index] = NULL;
+	cciss_free_gendisk(h, drv_index);
+err_free_drive_info:
+	cciss_free_drive_info(h, drv_index);
 	return -1;
 }
 
@@ -1872,21 +2098,25 @@ static void cciss_add_controller_node(ctlr_info_t *h)
 	if (h->gendisk[0] != NULL) /* already did this? Then bail. */
 		return;
 
-	drv_index = cciss_add_gendisk(h, 0, 1);
-	if (drv_index == -1) {
-		printk(KERN_WARNING "cciss%d: could not "
-			"add disk 0.\n", h->ctlr);
-		return;
-	}
-	h->drv[drv_index].block_size = 512;
-	h->drv[drv_index].nr_blocks = 0;
-	h->drv[drv_index].heads = 0;
-	h->drv[drv_index].sectors = 0;
-	h->drv[drv_index].cylinders = 0;
-	h->drv[drv_index].raid_level = -1;
-	memset(h->drv[drv_index].serial_no, 0, 16);
+	drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1);
+	if (drv_index == -1)
+		goto error;
+	h->drv[drv_index]->block_size = 512;
+	h->drv[drv_index]->nr_blocks = 0;
+	h->drv[drv_index]->heads = 0;
+	h->drv[drv_index]->sectors = 0;
+	h->drv[drv_index]->cylinders = 0;
+	h->drv[drv_index]->raid_level = -1;
+	memset(h->drv[drv_index]->serial_no, 0, 16);
 	disk = h->gendisk[drv_index];
-	cciss_add_disk(h, disk, drv_index);
+	if (cciss_add_disk(h, disk, drv_index) == 0)
+		return;
+	cciss_free_gendisk(h, drv_index);
+	cciss_free_drive_info(h, drv_index);
+error:
+	printk(KERN_WARNING "cciss%d: could not "
+		"add disk 0.\n", h->ctlr);
+	return;
 }
 
 /* This function will add and remove logical drives from the Logical
@@ -1897,7 +2127,8 @@ static void cciss_add_controller_node(ctlr_info_t *h)
  * INPUT
  * h		= The controller to perform the operations on
  */
-static int rebuild_lun_table(ctlr_info_t *h, int first_time)
+static int rebuild_lun_table(ctlr_info_t *h, int first_time,
+	int via_ioctl)
 {
 	int ctlr = h->ctlr;
 	int num_luns;
@@ -1907,7 +2138,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 	int i;
 	int drv_found;
 	int drv_index = 0;
-	__u32 lunid = 0;
+	unsigned char lunid[8] = CTLR_LUNID;
 	unsigned long flags;
 
 	if (!capable(CAP_SYS_RAWIO))
@@ -1960,13 +2191,13 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 		drv_found = 0;
 
 		/* skip holes in the array from already deleted drives */
-		if (h->drv[i].raid_level == -1)
+		if (h->drv[i] == NULL)
 			continue;
 
 		for (j = 0; j < num_luns; j++) {
-			memcpy(&lunid, &ld_buff->LUN[j][0], 4);
-			lunid = le32_to_cpu(lunid);
-			if (h->drv[i].LunID == lunid) {
+			memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid));
+			if (memcmp(h->drv[i]->LunID, lunid,
+				sizeof(lunid)) == 0) {
 				drv_found = 1;
 				break;
 			}
@@ -1974,11 +2205,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 		if (!drv_found) {
 			/* Deregister it from the OS, it's gone. */
 			spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
-			h->drv[i].busy_configuring = 1;
+			h->drv[i]->busy_configuring = 1;
 			spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
-			return_code = deregister_disk(h, i, 1);
-			cciss_destroy_ld_sysfs_entry(&h->drv[i]);
-			h->drv[i].busy_configuring = 0;
+			return_code = deregister_disk(h, i, 1, via_ioctl);
+			if (h->drv[i] != NULL)
+				h->drv[i]->busy_configuring = 0;
 		}
 	}
 
@@ -1992,17 +2223,16 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 
 		drv_found = 0;
 
-		memcpy(&lunid, &ld_buff->LUN[i][0], 4);
-		lunid = le32_to_cpu(lunid);
-
+		memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid));
 		/* Find if the LUN is already in the drive array
 		 * of the driver.  If so then update its info
 		 * if not in use.  If it does not exist then find
 		 * the first free index and add it.
 		 */
 		for (j = 0; j <= h->highest_lun; j++) {
-			if (h->drv[j].raid_level != -1 &&
-				h->drv[j].LunID == lunid) {
+			if (h->drv[j] != NULL &&
+				memcmp(h->drv[j]->LunID, lunid,
+					sizeof(h->drv[j]->LunID)) == 0) {
 				drv_index = j;
 				drv_found = 1;
 				break;
@@ -2015,7 +2245,8 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 			if (drv_index == -1)
 				goto freeret;
 		}
-		cciss_update_drive_info(ctlr, drv_index, first_time);
+		cciss_update_drive_info(ctlr, drv_index, first_time,
+			via_ioctl);
 	}		/* end for */
 
 freeret:
@@ -2032,6 +2263,25 @@ mem_msg:
 	goto freeret;
 }
 
+static void cciss_clear_drive_info(drive_info_struct *drive_info)
+{
+	/* zero out the disk size info */
+	drive_info->nr_blocks = 0;
+	drive_info->block_size = 0;
+	drive_info->heads = 0;
+	drive_info->sectors = 0;
+	drive_info->cylinders = 0;
+	drive_info->raid_level = -1;
+	memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no));
+	memset(drive_info->model, 0, sizeof(drive_info->model));
+	memset(drive_info->rev, 0, sizeof(drive_info->rev));
+	memset(drive_info->vendor, 0, sizeof(drive_info->vendor));
+	/*
+	 * don't clear the LUNID though, we need to remember which
+	 * one this one is.
+	 */
+}
+
 /* This function will deregister the disk and it's queue from the
  * kernel.  It must be called with the controller lock held and the
  * drv structures busy_configuring flag set.  It's parameters are:
@@ -2046,43 +2296,48 @@ mem_msg:
  *             the disk in preparation for re-adding it.  In this case
  *             the highest_lun should be left unchanged and the LunID
  *             should not be cleared.
+ * via_ioctl
+ *    This indicates whether we've reached this path via ioctl.
+ *    This affects the maximum usage count allowed for c0d0 to be messed with.
+ *    If this path is reached via ioctl(), then the max_usage_count will
+ *    be 1, as the process calling ioctl() has got to have the device open.
+ *    If we get here via sysfs, then the max usage count will be zero.
 */
 static int deregister_disk(ctlr_info_t *h, int drv_index,
-			   int clear_all)
+			   int clear_all, int via_ioctl)
 {
 	int i;
 	struct gendisk *disk;
 	drive_info_struct *drv;
+	int recalculate_highest_lun;
 
 	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
 
-	drv = &h->drv[drv_index];
+	drv = h->drv[drv_index];
 	disk = h->gendisk[drv_index];
 
 	/* make sure logical volume is NOT is use */
 	if (clear_all || (h->gendisk[0] == disk)) {
-		if (drv->usage_count > 1)
+		if (drv->usage_count > via_ioctl)
 			return -EBUSY;
 	} else if (drv->usage_count > 0)
 		return -EBUSY;
 
+	recalculate_highest_lun = (drv == h->drv[h->highest_lun]);
+
 	/* invalidate the devices and deregister the disk.  If it is disk
 	 * zero do not deregister it but just zero out it's values.  This
 	 * allows us to delete disk zero but keep the controller registered.
 	 */
 	if (h->gendisk[0] != disk) {
 		struct request_queue *q = disk->queue;
-		if (disk->flags & GENHD_FL_UP)
+		if (disk->flags & GENHD_FL_UP) {
+			cciss_destroy_ld_sysfs_entry(h, drv_index, 0);
 			del_gendisk(disk);
-		if (q) {
-			blk_cleanup_queue(q);
-			/* Set drv->queue to NULL so that we do not try
-			 * to call blk_start_queue on this queue in the
-			 * interrupt handler
-			 */
-			drv->queue = NULL;
 		}
+		if (q)
+			blk_cleanup_queue(q);
 		/* If clear_all is set then we are deleting the logical
 		 * drive, not just refreshing its info.  For drives
 		 * other than disk 0 we will call put_disk.  We do not
@@ -2105,34 +2360,20 @@ static int deregister_disk(ctlr_info_t *h, int drv_index,
 		}
 	} else {
 		set_capacity(disk, 0);
+		cciss_clear_drive_info(drv);
 	}
 
 	--h->num_luns;
-	/* zero out the disk size info */
-	drv->nr_blocks = 0;
-	drv->block_size = 0;
-	drv->heads = 0;
-	drv->sectors = 0;
-	drv->cylinders = 0;
-	drv->raid_level = -1;	/* This can be used as a flag variable to
-				 * indicate that this element of the drive
-				 * array is free.
-				 */
-
-	if (clear_all) {
-		/* check to see if it was the last disk */
-		if (drv == h->drv + h->highest_lun) {
-			/* if so, find the new hightest lun */
-			int i, newhighest = -1;
-			for (i = 0; i <= h->highest_lun; i++) {
-				/* if the disk has size > 0, it is available */
-				if (h->drv[i].heads)
-					newhighest = i;
-			}
-			h->highest_lun = newhighest;
-		}
 
-		drv->LunID = 0;
+	/* if it was the last disk, find the new hightest lun */
+	if (clear_all && recalculate_highest_lun) {
+		int i, newhighest = -1;
+		for (i = 0; i <= h->highest_lun; i++) {
+			/* if the disk has size > 0, it is available */
+			if (h->drv[i] && h->drv[i]->heads)
+				newhighest = i;
+		}
+		h->highest_lun = newhighest;
 	}
 	return 0;
 }
@@ -2479,8 +2720,6 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
 	} else {		/* Get geometry failed */
 		printk(KERN_WARNING "cciss: reading geometry failed\n");
 	}
-	printk(KERN_INFO "      heads=%d, sectors=%d, cylinders=%d\n\n",
-	       drv->heads, drv->sectors, drv->cylinders);
 }
 
 static void
@@ -2514,9 +2753,6 @@ cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size,
 		*total_size = 0;
 		*block_size = BLOCK_SIZE;
 	}
-	if (*total_size != 0)
-		printk(KERN_INFO "      blocks= %llu block_size= %d\n",
-		(unsigned long long)*total_size+1, *block_size);
 	kfree(buf);
 }
 
@@ -2568,7 +2804,8 @@ static int cciss_revalidate(struct gendisk *disk)
 	InquiryData_struct *inq_buff = NULL;
 
 	for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
-		if (h->drv[logvol].LunID == drv->LunID) {
+		if (memcmp(h->drv[logvol]->LunID, drv->LunID,
+			sizeof(drv->LunID)) == 0) {
 			FOUND = 1;
 			break;
 		}
@@ -3053,8 +3290,7 @@ static void do_cciss_request(struct request_queue *q)
 	/* The first 2 bits are reserved for controller error reporting. */
 	c->Header.Tag.lower = (c->cmdindex << 3);
 	c->Header.Tag.lower |= 0x04;	/* flag for direct lookup. */
-	c->Header.LUN.LogDev.VolId = drv->LunID;
-	c->Header.LUN.LogDev.Mode = 1;
+	memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
 	c->Request.CDBLen = 10;	// 12 byte commands not in FW yet;
 	c->Request.Type.Type = TYPE_CMD;	// It is a command.
 	c->Request.Type.Attribute = ATTR_SIMPLE;
@@ -3232,20 +3468,121 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/**
+ * add_to_scan_list() - add controller to rescan queue
+ * @h:		      Pointer to the controller.
+ *
+ * Adds the controller to the rescan queue if not already on the queue.
+ *
+ * returns 1 if added to the queue, 0 if skipped (could be on the
+ * queue already, or the controller could be initializing or shutting
+ * down).
+ **/
+static int add_to_scan_list(struct ctlr_info *h)
+{
+	struct ctlr_info *test_h;
+	int found = 0;
+	int ret = 0;
+
+	if (h->busy_initializing)
+		return 0;
+
+	if (!mutex_trylock(&h->busy_shutting_down))
+		return 0;
+
+	mutex_lock(&scan_mutex);
+	list_for_each_entry(test_h, &scan_q, scan_list) {
+		if (test_h == h) {
+			found = 1;
+			break;
+		}
+	}
+	if (!found && !h->busy_scanning) {
+		INIT_COMPLETION(h->scan_wait);
+		list_add_tail(&h->scan_list, &scan_q);
+		ret = 1;
+	}
+	mutex_unlock(&scan_mutex);
+	mutex_unlock(&h->busy_shutting_down);
+
+	return ret;
+}
+
+/**
+ * remove_from_scan_list() - remove controller from rescan queue
+ * @h:			   Pointer to the controller.
+ *
+ * Removes the controller from the rescan queue if present. Blocks if
+ * the controller is currently conducting a rescan.
+ **/
+static void remove_from_scan_list(struct ctlr_info *h)
+{
+	struct ctlr_info *test_h, *tmp_h;
+	int scanning = 0;
+
+	mutex_lock(&scan_mutex);
+	list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) {
+		if (test_h == h) {
+			list_del(&h->scan_list);
+			complete_all(&h->scan_wait);
+			mutex_unlock(&scan_mutex);
+			return;
+		}
+	}
+	if (&h->busy_scanning)
+		scanning = 0;
+	mutex_unlock(&scan_mutex);
+
+	if (scanning)
+		wait_for_completion(&h->scan_wait);
+}
+
+/**
+ * scan_thread() - kernel thread used to rescan controllers
+ * @data:	 Ignored.
+ *
+ * A kernel thread used scan for drive topology changes on
+ * controllers. The thread processes only one controller at a time
+ * using a queue.  Controllers are added to the queue using
+ * add_to_scan_list() and removed from the queue either after done
+ * processing or using remove_from_scan_list().
+ *
+ * returns 0.
+ **/
 static int scan_thread(void *data)
 {
-	ctlr_info_t *h = data;
-	int rc;
-	DECLARE_COMPLETION_ONSTACK(wait);
-	h->rescan_wait = &wait;
+	struct ctlr_info *h;
 
-	for (;;) {
-		rc = wait_for_completion_interruptible(&wait);
+	while (1) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule();
 		if (kthread_should_stop())
 			break;
-		if (!rc)
-			rebuild_lun_table(h, 0);
+
+		while (1) {
+			mutex_lock(&scan_mutex);
+			if (list_empty(&scan_q)) {
+				mutex_unlock(&scan_mutex);
+				break;
+			}
+
+			h = list_entry(scan_q.next,
+				       struct ctlr_info,
+				       scan_list);
+			list_del(&h->scan_list);
+			h->busy_scanning = 1;
+			mutex_unlock(&scan_mutex);
+
+			if (h) {
+				rebuild_lun_table(h, 0, 0);
+				complete_all(&h->scan_wait);
+				mutex_lock(&scan_mutex);
+				h->busy_scanning = 0;
+				mutex_unlock(&scan_mutex);
+			}
+		}
 	}
+
 	return 0;
 }
 
@@ -3268,8 +3605,8 @@ static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
 	case REPORT_LUNS_CHANGED:
 		printk(KERN_WARNING "cciss%d: report LUN data "
 			"changed\n", h->ctlr);
-		if (h->rescan_wait)
-			complete(h->rescan_wait);
+		add_to_scan_list(h);
+		wake_up_process(cciss_scan_thread);
 		return 1;
 	break;
 	case POWER_OR_RESET:
@@ -3422,7 +3759,27 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
 	__u64 cfg_offset;
 	__u32 cfg_base_addr;
 	__u64 cfg_base_addr_index;
-	int i, err;
+	int i, prod_index, err;
+
+	subsystem_vendor_id = pdev->subsystem_vendor;
+	subsystem_device_id = pdev->subsystem_device;
+	board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
+		    subsystem_vendor_id);
+
+	for (i = 0; i < ARRAY_SIZE(products); i++) {
+		/* Stand aside for hpsa driver on request */
+		if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
+			return -ENODEV;
+		if (board_id == products[i].board_id)
+			break;
+	}
+	prod_index = i;
+	if (prod_index == ARRAY_SIZE(products)) {
+		dev_warn(&pdev->dev,
+			"unrecognized board ID: 0x%08lx, ignoring.\n",
+			(unsigned long) board_id);
+		return -ENODEV;
+	}
 
 	/* check to see if controller has been disabled */
 	/* BEFORE trying to enable it */
@@ -3446,11 +3803,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
 		return err;
 	}
 
-	subsystem_vendor_id = pdev->subsystem_vendor;
-	subsystem_device_id = pdev->subsystem_device;
-	board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
-		    subsystem_vendor_id);
-
 #ifdef CCISS_DEBUG
 	printk("command = %x\n", command);
 	printk("irq = %x\n", pdev->irq);
@@ -3489,7 +3841,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
 		if (scratchpad == CCISS_FIRMWARE_READY)
 			break;
 		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ / 10);	/* wait 100ms */
+		schedule_timeout(msecs_to_jiffies(100));	/* wait 100ms */
 	}
 	if (scratchpad != CCISS_FIRMWARE_READY) {
 		printk(KERN_WARNING "cciss: Board not ready.  Timed out.\n");
@@ -3536,14 +3888,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
 	 * leave a little room for ioctl calls.
 	 */
 	c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
-	for (i = 0; i < ARRAY_SIZE(products); i++) {
-		if (board_id == products[i].board_id) {
-			c->product_name = products[i].product_name;
-			c->access = *(products[i].access);
-			c->nr_cmds = c->max_commands - 4;
-			break;
-		}
-	}
+	c->product_name = products[prod_index].product_name;
+	c->access = *(products[prod_index].access);
+	c->nr_cmds = c->max_commands - 4;
 	if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
 	    (readb(&c->cfgtable->Signature[1]) != 'I') ||
 	    (readb(&c->cfgtable->Signature[2]) != 'S') ||
@@ -3552,27 +3899,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
 		err = -ENODEV;
 		goto err_out_free_res;
 	}
-	/* We didn't find the controller in our list. We know the
-	 * signature is valid. If it's an HP device let's try to
-	 * bind to the device and fire it up. Otherwise we bail.
-	 */
-	if (i == ARRAY_SIZE(products)) {
-		if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
-			c->product_name = products[i-1].product_name;
-			c->access = *(products[i-1].access);
-			c->nr_cmds = c->max_commands - 4;
-			printk(KERN_WARNING "cciss: This is an unknown "
-				"Smart Array controller.\n"
-				"cciss: Please update to the latest driver "
-				"available from www.hp.com.\n");
-		} else {
-			printk(KERN_WARNING "cciss: Sorry, I don't know how"
-				" to access the Smart Array controller %08lx\n"
-					, (unsigned long)board_id);
-			err = -ENODEV;
-			goto err_out_free_res;
-		}
-	}
 #ifdef CONFIG_X86
 	{
 		/* Need to enable prefetch in the SCSI core for 6400 in x86 */
@@ -3615,7 +3941,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
 			break;
 		/* delay and try again */
 		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(10);
+		schedule_timeout(msecs_to_jiffies(1));
 	}
 
 #ifdef CCISS_DEBUG
@@ -3669,15 +3995,16 @@ Enomem:
 	return -1;
 }
 
-static void free_hba(int i)
+static void free_hba(int n)
 {
-	ctlr_info_t *p = hba[i];
-	int n;
+	ctlr_info_t *h = hba[n];
+	int i;
 
-	hba[i] = NULL;
-	for (n = 0; n < CISS_MAX_LUN; n++)
-		put_disk(p->gendisk[n]);
-	kfree(p);
+	hba[n] = NULL;
+	for (i = 0; i < h->highest_lun + 1; i++)
+		if (h->gendisk[i] != NULL)
+			put_disk(h->gendisk[i]);
+	kfree(h);
 }
 
 /* Send a message CDB to the firmware. */
@@ -3918,14 +4245,17 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	hba[i]->busy_initializing = 1;
 	INIT_HLIST_HEAD(&hba[i]->cmpQ);
 	INIT_HLIST_HEAD(&hba[i]->reqQ);
+	mutex_init(&hba[i]->busy_shutting_down);
 
 	if (cciss_pci_init(hba[i], pdev) != 0)
-		goto clean0;
+		goto clean_no_release_regions;
 
 	sprintf(hba[i]->devname, "cciss%d", i);
 	hba[i]->ctlr = i;
 	hba[i]->pdev = pdev;
 
+	init_completion(&hba[i]->scan_wait);
+
 	if (cciss_create_hba_sysfs_entry(hba[i]))
 		goto clean0;
 
@@ -4001,8 +4331,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	hba[i]->num_luns = 0;
 	hba[i]->highest_lun = -1;
 	for (j = 0; j < CISS_MAX_LUN; j++) {
-		hba[i]->drv[j].raid_level = -1;
-		hba[i]->drv[j].queue = NULL;
+		hba[i]->drv[j] = NULL;
 		hba[i]->gendisk[j] = NULL;
 	}
 
@@ -4035,14 +4364,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 
 	hba[i]->cciss_max_sectors = 2048;
 
+	rebuild_lun_table(hba[i], 1, 0);
 	hba[i]->busy_initializing = 0;
-
-	rebuild_lun_table(hba[i], 1);
-	hba[i]->cciss_scan_thread = kthread_run(scan_thread, hba[i],
-				"cciss_scan%02d", i);
-	if (IS_ERR(hba[i]->cciss_scan_thread))
-		return PTR_ERR(hba[i]->cciss_scan_thread);
-
 	return 1;
 
 clean4:
@@ -4062,18 +4385,14 @@ clean2:
 clean1:
 	cciss_destroy_hba_sysfs_entry(hba[i]);
 clean0:
+	pci_release_regions(pdev);
+clean_no_release_regions:
 	hba[i]->busy_initializing = 0;
-	/* cleanup any queues that may have been initialized */
-	for (j=0; j <= hba[i]->highest_lun; j++){
-		drive_info_struct *drv = &(hba[i]->drv[j]);
-		if (drv->queue)
-			blk_cleanup_queue(drv->queue);
-	}
+
 	/*
 	 * Deliberately omit pci_disable_device(): it does something nasty to
 	 * Smart Array controllers that pci_enable_device does not undo
 	 */
-	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
 	free_hba(i);
 	return -1;
@@ -4125,8 +4444,9 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
 		return;
 	}
 
-	kthread_stop(hba[i]->cciss_scan_thread);
+	mutex_lock(&hba[i]->busy_shutting_down);
 
+	remove_from_scan_list(hba[i]);
 	remove_proc_entry(hba[i]->devname, proc_cciss);
 	unregister_blkdev(hba[i]->major, hba[i]->devname);
 
@@ -4136,8 +4456,10 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
 		if (disk) {
 			struct request_queue *q = disk->queue;
 
-			if (disk->flags & GENHD_FL_UP)
+			if (disk->flags & GENHD_FL_UP) {
+				cciss_destroy_ld_sysfs_entry(hba[i], j, 1);
 				del_gendisk(disk);
+			}
 			if (q)
 				blk_cleanup_queue(q);
 		}
@@ -4170,6 +4492,7 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
 	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
 	cciss_destroy_hba_sysfs_entry(hba[i]);
+	mutex_unlock(&hba[i]->busy_shutting_down);
 	free_hba(i);
 }
 
@@ -4202,15 +4525,25 @@ static int __init cciss_init(void)
 	if (err)
 		return err;
 
+	/* Start the scan thread */
+	cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan");
+	if (IS_ERR(cciss_scan_thread)) {
+		err = PTR_ERR(cciss_scan_thread);
+		goto err_bus_unregister;
+	}
+
 	/* Register for our PCI devices */
 	err = pci_register_driver(&cciss_pci_driver);
 	if (err)
-		goto err_bus_register;
+		goto err_thread_stop;
 
-	return 0;
+	return err;
 
-err_bus_register:
+err_thread_stop:
+	kthread_stop(cciss_scan_thread);
+err_bus_unregister:
 	bus_unregister(&cciss_bus_type);
+
 	return err;
 }
 
@@ -4227,6 +4560,7 @@ static void __exit cciss_cleanup(void)
 			cciss_remove_one(hba[i]->pdev);
 		}
 	}
+	kthread_stop(cciss_scan_thread);
 	remove_proc_entry("driver/cciss", NULL);
 	bus_unregister(&cciss_bus_type);
 }
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 06a5db25b298..31524cf42c77 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -2,6 +2,7 @@
 #define CCISS_H
 
 #include <linux/genhd.h>
+#include <linux/mutex.h>
 
 #include "cciss_cmd.h"
 
@@ -29,7 +30,7 @@ struct access_method {
 };
 typedef struct _drive_info_struct
 {
- 	__u32   LunID;	
+	unsigned char LunID[8];
 	int 	usage_count;
 	struct request_queue *queue;
 	sector_t nr_blocks;
@@ -51,6 +52,7 @@ typedef struct _drive_info_struct
 	char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
 	char model[MODEL_LEN + 1];   /* SCSI model string */
 	char rev[REV_LEN + 1];       /* SCSI revision string */
+	char device_initialized;     /* indicates whether dev is initialized */
 } drive_info_struct;
 
 struct ctlr_info 
@@ -86,7 +88,7 @@ struct ctlr_info
 	BYTE	cciss_read_capacity;
 
 	// information about each logical volume
-	drive_info_struct drv[CISS_MAX_LUN];
+	drive_info_struct *drv[CISS_MAX_LUN];
 
 	struct access_method access;
 
@@ -108,6 +110,8 @@ struct ctlr_info
 	int			nr_frees; 
 	int			busy_configuring;
 	int			busy_initializing;
+	int			busy_scanning;
+	struct mutex		busy_shutting_down;
 
 	/* This element holds the zero based queue number of the last
 	 * queue to be started.  It is used for fairness.
@@ -122,8 +126,8 @@ struct ctlr_info
 	/* and saved for later processing */
 #endif
 	unsigned char alive;
-	struct completion *rescan_wait;
-	struct task_struct *cciss_scan_thread;
+	struct list_head scan_list;
+	struct completion scan_wait;
 	struct device dev;
 };
 
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index b82d438e2607..6422651ec364 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -32,6 +32,7 @@
 #include <linux/blkpg.h>
 #include <linux/timer.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/hdreg.h>
 #include <linux/spinlock.h>
@@ -177,7 +178,6 @@ static int cpqarray_register_ctlr(int ctlr, struct pci_dev *pdev);
 
 #ifdef CONFIG_PROC_FS
 static void ida_procinit(int i);
-static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data);
 #else
 static void ida_procinit(int i) {}
 #endif
@@ -206,6 +206,7 @@ static const struct block_device_operations ida_fops  = {
 #ifdef CONFIG_PROC_FS
 
 static struct proc_dir_entry *proc_array;
+static const struct file_operations ida_proc_fops;
 
 /*
  * Get us a file in /proc/array that says something about each controller.
@@ -218,19 +219,16 @@ static void __init ida_procinit(int i)
 		if (!proc_array) return;
 	}
 
-	create_proc_read_entry(hba[i]->devname, 0, proc_array,
-			       ida_proc_get_info, hba[i]);
+	proc_create_data(hba[i]->devname, 0, proc_array, &ida_proc_fops, hba[i]);
 }
 
 /*
  * Report information about this controller.
  */
-static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
+static int ida_proc_show(struct seq_file *m, void *v)
 {
-	off_t pos = 0;
-	off_t len = 0;
-	int size, i, ctlr;
-	ctlr_info_t *h = (ctlr_info_t*)data;
+	int i, ctlr;
+	ctlr_info_t *h = (ctlr_info_t*)m->private;
 	drv_info_t *drv;
 #ifdef CPQ_PROC_PRINT_QUEUES
 	cmdlist_t *c;
@@ -238,7 +236,7 @@ static int ida_proc_get_info(char *buffer, char **start, off_t offset, int lengt
 #endif
 
 	ctlr = h->ctlr;
-	size = sprintf(buffer, "%s:  Compaq %s Controller\n"
+	seq_printf(m, "%s:  Compaq %s Controller\n"
 		"       Board ID: 0x%08lx\n"
 		"       Firmware Revision: %c%c%c%c\n"
 		"       Controller Sig: 0x%08lx\n"
@@ -258,55 +256,54 @@ static int ida_proc_get_info(char *buffer, char **start, off_t offset, int lengt
 		h->log_drives, h->phys_drives,
 		h->Qdepth, h->maxQsinceinit);
 
-	pos += size; len += size;
-	
-	size = sprintf(buffer+len, "Logical Drive Info:\n");
-	pos += size; len += size;
+	seq_puts(m, "Logical Drive Info:\n");
 
 	for(i=0; i<h->log_drives; i++) {
 		drv = &h->drv[i];
-		size = sprintf(buffer+len, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
+		seq_printf(m, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
 				ctlr, i, drv->blk_size, drv->nr_blks);
-		pos += size; len += size;
 	}
 
 #ifdef CPQ_PROC_PRINT_QUEUES
 	spin_lock_irqsave(IDA_LOCK(h->ctlr), flags); 
-	size = sprintf(buffer+len, "\nCurrent Queues:\n");
-	pos += size; len += size;
+	seq_puts(m, "\nCurrent Queues:\n");
 
 	c = h->reqQ;
-	size = sprintf(buffer+len, "reqQ = %p", c); pos += size; len += size;
+	seq_printf(m, "reqQ = %p", c);
 	if (c) c=c->next;
 	while(c && c != h->reqQ) {
-		size = sprintf(buffer+len, "->%p", c);
-		pos += size; len += size;
+		seq_printf(m, "->%p", c);
 		c=c->next;
 	}
 
 	c = h->cmpQ;
-	size = sprintf(buffer+len, "\ncmpQ = %p", c); pos += size; len += size;
+	seq_printf(m, "\ncmpQ = %p", c);
 	if (c) c=c->next;
 	while(c && c != h->cmpQ) {
-		size = sprintf(buffer+len, "->%p", c);
-		pos += size; len += size;
+		seq_printf(m, "->%p", c);
 		c=c->next;
 	}
 
-	size = sprintf(buffer+len, "\n"); pos += size; len += size;
+	seq_putc(m, '\n');
 	spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags); 
 #endif
-	size = sprintf(buffer+len, "nr_allocs = %d\nnr_frees = %d\n",
+	seq_printf(m, "nr_allocs = %d\nnr_frees = %d\n",
 			h->nr_allocs, h->nr_frees);
-	pos += size; len += size;
-
-	*eof = 1;
-	*start = buffer+offset;
-	len -= offset;
-	if (len>length)
-		len = length;
-	return len;
+	return 0;
+}
+
+static int ida_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ida_proc_show, PDE(inode)->data);
 }
+
+static const struct file_operations ida_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= ida_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 #endif /* CONFIG_PROC_FS */
 
 module_param_array(eisa, int, NULL, 0);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index edda9ea7c626..bd112c8c7bcd 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -949,7 +949,7 @@ static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev)
 	lo->lo_state = Lo_unbound;
 	/* This is safe: open() is still holding a reference. */
 	module_put(THIS_MODULE);
-	if (max_part > 0)
+	if (max_part > 0 && bdev)
 		ioctl_by_bdev(bdev, BLKRRPART, 0);
 	mutex_unlock(&lo->lo_ctl_mutex);
 	/*
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 43f19389647a..51042f0ba7e1 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -3,7 +3,6 @@
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/virtio.h>
-#include <linux/virtio_ids.h>
 #include <linux/virtio_blk.h>
 #include <linux/scatterlist.h>
 
@@ -183,34 +182,6 @@ static void do_virtblk_request(struct request_queue *q)
 		vblk->vq->vq_ops->kick(vblk->vq);
 }
 
-/* return ATA identify data
- */
-static int virtblk_identify(struct gendisk *disk, void *argp)
-{
-	struct virtio_blk *vblk = disk->private_data;
-	void *opaque;
-	int err = -ENOMEM;
-
-	opaque = kmalloc(VIRTIO_BLK_ID_BYTES, GFP_KERNEL);
-	if (!opaque)
-		goto out;
-
-	err = virtio_config_buf(vblk->vdev, VIRTIO_BLK_F_IDENTIFY,
-		offsetof(struct virtio_blk_config, identify), opaque,
-		VIRTIO_BLK_ID_BYTES);
-
-	if (err)
-		goto out_kfree;
-
-	if (copy_to_user(argp, opaque, VIRTIO_BLK_ID_BYTES))
-		err = -EFAULT;
-
-out_kfree:
-	kfree(opaque);
-out:
-	return err;
-}
-
 static void virtblk_prepare_flush(struct request_queue *q, struct request *req)
 {
 	req->cmd_type = REQ_TYPE_LINUX_BLOCK;
@@ -222,10 +193,6 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
 {
 	struct gendisk *disk = bdev->bd_disk;
 	struct virtio_blk *vblk = disk->private_data;
-	void __user *argp = (void __user *)data;
-
-	if (cmd == HDIO_GET_IDENTITY)
-		return virtblk_identify(disk, argp);
 
 	/*
 	 * Only allow the generic SCSI ioctls if the host can support it.
@@ -233,7 +200,8 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
 	if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI))
 		return -ENOTTY;
 
-	return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
+	return scsi_cmd_ioctl(disk->queue, disk, mode, cmd,
+			      (void __user *)data);
 }
 
 /* We provide getgeo only to please some old bootloader/partitioning tools */
@@ -332,7 +300,6 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
 	}
 
 	vblk->disk->queue->queuedata = vblk;
-	queue_flag_set_unlocked(QUEUE_FLAG_VIRT, vblk->disk->queue);
 
 	if (index < 26) {
 		sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26);
@@ -445,7 +412,7 @@ static struct virtio_device_id id_table[] = {
 static unsigned int features[] = {
 	VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
 	VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE,
-	VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY, VIRTIO_BLK_F_FLUSH
+	VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH
 };
 
 /*
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index 60ab75104da9..1c129211302d 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -217,7 +217,7 @@ static const struct agp_bridge_driver parisc_agp_driver = {
 	.configure		= parisc_agp_configure,
 	.fetch_size		= parisc_agp_fetch_size,
 	.tlb_flush		= parisc_agp_tlbflush,
-	.mask_memory		= parisc_agp_page_mask_memory,
+	.mask_memory		= parisc_agp_mask_memory,
 	.masks			= parisc_agp_masks,
 	.agp_enable		= parisc_agp_enable,
 	.cache_flush		= global_cache_flush,
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index aaca40283be9..4f568cb9af3f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -393,7 +393,7 @@ static int apm_open(struct inode * inode, struct file * filp)
 	return as ? 0 : -ENOMEM;
 }
 
-static struct file_operations apm_bios_fops = {
+static const struct file_operations apm_bios_fops = {
 	.owner		= THIS_MODULE,
 	.read		= apm_read,
 	.poll		= apm_poll,
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index 73a0765344b6..fe2cb2f5db17 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/char/bfin-otp.c b/drivers/char/bfin-otp.c
index e3dd24bff514..836d4f0a876f 100644
--- a/drivers/char/bfin-otp.c
+++ b/drivers/char/bfin-otp.c
@@ -217,7 +217,7 @@ static long bfin_otp_ioctl(struct file *filp, unsigned cmd, unsigned long arg)
 # define bfin_otp_ioctl NULL
 #endif
 
-static struct file_operations bfin_otp_fops = {
+static const struct file_operations bfin_otp_fops = {
 	.owner          = THIS_MODULE,
 	.unlocked_ioctl = bfin_otp_ioctl,
 	.read           = bfin_otp_read,
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index df5038bbcbc2..4254457d3911 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -3354,7 +3354,7 @@ static int __init cy_detect_isa(void)
 			continue;
 		}
 #ifdef MODULE
-		if (isparam && irq[i])
+		if (isparam && i < NR_CARDS && irq[i])
 			cy_isa_irq = irq[i];
 		else
 #endif
diff --git a/drivers/char/dtlk.c b/drivers/char/dtlk.c
index 52e06589821d..045c930e6320 100644
--- a/drivers/char/dtlk.c
+++ b/drivers/char/dtlk.c
@@ -56,6 +56,7 @@
 #include <linux/errno.h>	/* for -EBUSY */
 #include <linux/ioport.h>	/* for request_region */
 #include <linux/delay.h>	/* for loops_per_jiffy */
+#include <linux/sched.h>
 #include <linux/smp_lock.h>	/* cycle_kernel_lock() */
 #include <asm/io.h>		/* for inb_p, outb_p, inb, outb, etc. */
 #include <asm/uaccess.h>	/* for get_user, etc. */
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 9d589e3144de..dde5134713e2 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>
diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c
index 9e4e569dc00d..d400cbd280f2 100644
--- a/drivers/char/generic_serial.c
+++ b/drivers/char/generic_serial.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/tty.h>
+#include <linux/sched.h>
 #include <linux/serial.h>
 #include <linux/mm.h>
 #include <linux/generic_serial.h>
diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c
index aac0985a572b..31e7c91c2d9d 100644
--- a/drivers/char/genrtc.c
+++ b/drivers/char/genrtc.c
@@ -43,6 +43,7 @@
 #define RTC_VERSION	"1.07"
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
 #include <linux/fcntl.h>
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 00dd3de1be51..06aad0831c73 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -116,7 +116,7 @@ static int __devinit omap_rng_probe(struct platform_device *pdev)
 	if (!res)
 		return -ENOENT;
 
-	mem = request_mem_region(res->start, res->end - res->start + 1,
+	mem = request_mem_region(res->start, resource_size(res),
 				 pdev->name);
 	if (mem == NULL) {
 		ret = -EBUSY;
@@ -124,7 +124,7 @@ static int __devinit omap_rng_probe(struct platform_device *pdev)
 	}
 
 	dev_set_drvdata(&pdev->dev, mem);
-	rng_base = ioremap(res->start, res->end - res->start + 1);
+	rng_base = ioremap(res->start, resource_size(res));
 	if (!rng_base) {
 		ret = -ENOMEM;
 		goto err_ioremap;
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 962968f05b94..915157fcff98 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -21,7 +21,6 @@
 #include <linux/scatterlist.h>
 #include <linux/spinlock.h>
 #include <linux/virtio.h>
-#include <linux/virtio_ids.h>
 #include <linux/virtio_rng.h>
 
 /* The host will fill any buffer we give it with sweet, sweet randomness.  We
@@ -117,7 +116,7 @@ static int virtrng_probe(struct virtio_device *vdev)
 	return 0;
 }
 
-static void virtrng_remove(struct virtio_device *vdev)
+static void __devexit virtrng_remove(struct virtio_device *vdev)
 {
 	vdev->config->reset(vdev);
 	hwrng_unregister(&virtio_hwrng);
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index 41fc11dc921c..65545de3dbf4 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -36,6 +36,7 @@
 #include <linux/errno.h>
 #include <asm/system.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/ipmi.h>
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 09050797c76a..ec5e3f8df648 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -35,6 +35,7 @@
 #include <linux/errno.h>
 #include <asm/system.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index ab2f3349c5c4..402838f4083e 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -19,6 +19,7 @@
 /*****************************************************************************/
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/interrupt.h>
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index ec58d8c387ff..d3400b20444f 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -48,6 +48,7 @@
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
+#include <linux/sched.h>
 #include <linux/serial.h>
 #include <linux/interrupt.h>
 #include <linux/kmod.h>
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 53761cefa915..62f282e67638 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -18,6 +18,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/fcntl.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/major.h>
 #include <linux/mm.h>
@@ -261,6 +262,9 @@ done:
 	return 0;
 }
 
+/* Traditional BSD devices */
+#ifdef CONFIG_LEGACY_PTYS
+
 static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
 {
 	struct tty_struct *o_tty;
@@ -310,24 +314,6 @@ free_mem_out:
 	return -ENOMEM;
 }
 
-
-static const struct tty_operations pty_ops = {
-	.install = pty_install,
-	.open = pty_open,
-	.close = pty_close,
-	.write = pty_write,
-	.write_room = pty_write_room,
-	.flush_buffer = pty_flush_buffer,
-	.chars_in_buffer = pty_chars_in_buffer,
-	.unthrottle = pty_unthrottle,
-	.set_termios = pty_set_termios,
-	.resize = pty_resize
-};
-
-/* Traditional BSD devices */
-#ifdef CONFIG_LEGACY_PTYS
-static struct tty_driver *pty_driver, *pty_slave_driver;
-
 static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
@@ -341,7 +327,12 @@ static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
 static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
 module_param(legacy_count, int, 0);
 
-static const struct tty_operations pty_ops_bsd = {
+/*
+ * The master side of a pty can do TIOCSPTLCK and thus
+ * has pty_bsd_ioctl.
+ */
+static const struct tty_operations master_pty_ops_bsd = {
+	.install = pty_install,
 	.open = pty_open,
 	.close = pty_close,
 	.write = pty_write,
@@ -354,8 +345,23 @@ static const struct tty_operations pty_ops_bsd = {
 	.resize = pty_resize
 };
 
+static const struct tty_operations slave_pty_ops_bsd = {
+	.install = pty_install,
+	.open = pty_open,
+	.close = pty_close,
+	.write = pty_write,
+	.write_room = pty_write_room,
+	.flush_buffer = pty_flush_buffer,
+	.chars_in_buffer = pty_chars_in_buffer,
+	.unthrottle = pty_unthrottle,
+	.set_termios = pty_set_termios,
+	.resize = pty_resize
+};
+
 static void __init legacy_pty_init(void)
 {
+	struct tty_driver *pty_driver, *pty_slave_driver;
+
 	if (legacy_count <= 0)
 		return;
 
@@ -383,7 +389,7 @@ static void __init legacy_pty_init(void)
 	pty_driver->init_termios.c_ospeed = 38400;
 	pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
 	pty_driver->other = pty_slave_driver;
-	tty_set_operations(pty_driver, &pty_ops);
+	tty_set_operations(pty_driver, &master_pty_ops_bsd);
 
 	pty_slave_driver->owner = THIS_MODULE;
 	pty_slave_driver->driver_name = "pty_slave";
@@ -399,7 +405,7 @@ static void __init legacy_pty_init(void)
 	pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
 					TTY_DRIVER_REAL_RAW;
 	pty_slave_driver->other = pty_driver;
-	tty_set_operations(pty_slave_driver, &pty_ops);
+	tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd);
 
 	if (tty_register_driver(pty_driver))
 		panic("Couldn't register pty driver");
diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c
index 01f2654d5a2e..f121357e5af0 100644
--- a/drivers/char/rio/riocmd.c
+++ b/drivers/char/rio/riocmd.c
@@ -32,6 +32,7 @@
 */
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/tty.h>
diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c
index 74339559f0b9..780506326a73 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/char/rio/rioctrl.c
@@ -31,6 +31,7 @@
 */
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <asm/io.h>
diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c
index 2fb49e89b324..47fab7c33073 100644
--- a/drivers/char/rio/riotty.c
+++ b/drivers/char/rio/riotty.c
@@ -33,6 +33,7 @@
 #define __EXPLICIT_DEF_H__
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/tty.h>
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index e0d0f8b2696b..bc4ab3e54550 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -74,6 +74,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>
+#include <linux/sched.h>
 #include <linux/sysctl.h>
 #include <linux/wait.h>
 #include <linux/bcd.h>
diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c
index 33a2b531802e..9610861d1f5f 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/char/ser_a2232.c
@@ -89,6 +89,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/sched.h>
 #include <linux/tty.h>
 
 #include <asm/setup.h>
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 5942a9d674c0..452370af95de 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -220,8 +220,7 @@ static inline int serial_paranoia_check(struct cyclades_port *info, char *name,
 		return 1;
 	}
 
-	if ((long)info < (long)(&cy_port[0])
-	    || (long)(&cy_port[NR_PORTS]) < (long)info) {
+	if (info < &cy_port[0] || info >= &cy_port[NR_PORTS]) {
 		printk("Warning: cyclades_port out of range for (%s) in %s\n",
 				name, routine);
 		return 1;
@@ -520,15 +519,13 @@ static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id)
 		panic("TxInt on debug port!!!");
 	}
 #endif
-
-	info = &cy_port[channel];
-
 	/* validate the port number (as configured and open) */
 	if ((channel < 0) || (NR_PORTS <= channel)) {
 		base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
 		base_addr[CyTEOIR] = CyNOTRANS;
 		return IRQ_HANDLED;
 	}
+	info = &cy_port[channel];
 	info->last_active = jiffies;
 	if (info->tty == 0) {
 		base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index fd3dced97776..8c262aaf7c26 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -36,6 +36,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/input.h>
 #include <linux/pci.h>
 #include <linux/init.h>
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 53e504f41b20..db6dcfa35ba0 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -27,6 +27,7 @@
 /*****************************************************************************/
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
index 8f2284be68e1..80ea6bcfffdc 100644
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@@ -32,6 +32,7 @@
 #include <linux/kernel.h>	/* printk() */
 #include <linux/fs.h>		/* everything... */
 #include <linux/errno.h>	/* error codes */
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 45d58002b06c..47c2d2763456 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -696,8 +696,7 @@ int __tpm_pcr_read(struct tpm_chip *chip, int pcr_idx, u8 *res_buf)
 
 	cmd.header.in = pcrread_header;
 	cmd.params.pcrread_in.pcr_idx = cpu_to_be32(pcr_idx);
-	BUG_ON(cmd.header.in.length > READ_PCR_RESULT_SIZE);
-	rc = transmit_cmd(chip, &cmd, cmd.header.in.length,
+	rc = transmit_cmd(chip, &cmd, READ_PCR_RESULT_SIZE,
 			  "attempting to read a pcr value");
 
 	if (rc == 0)
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index 3108991c5c8b..66fa4e10d76b 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -402,28 +402,26 @@ static void flush_to_ldisc(struct work_struct *work)
 		container_of(work, struct tty_struct, buf.work.work);
 	unsigned long 	flags;
 	struct tty_ldisc *disc;
-	struct tty_buffer *tbuf, *head;
-	char *char_buf;
-	unsigned char *flag_buf;
 
 	disc = tty_ldisc_ref(tty);
 	if (disc == NULL)	/*  !TTY_LDISC */
 		return;
 
 	spin_lock_irqsave(&tty->buf.lock, flags);
-	/* So we know a flush is running */
-	set_bit(TTY_FLUSHING, &tty->flags);
-	head = tty->buf.head;
-	if (head != NULL) {
-		tty->buf.head = NULL;
-		for (;;) {
-			int count = head->commit - head->read;
+
+	if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
+		struct tty_buffer *head;
+		while ((head = tty->buf.head) != NULL) {
+			int count;
+			char *char_buf;
+			unsigned char *flag_buf;
+
+			count = head->commit - head->read;
 			if (!count) {
 				if (head->next == NULL)
 					break;
-				tbuf = head;
-				head = head->next;
-				tty_buffer_free(tty, tbuf);
+				tty->buf.head = head->next;
+				tty_buffer_free(tty, head);
 				continue;
 			}
 			/* Ldisc or user is trying to flush the buffers
@@ -445,9 +443,9 @@ static void flush_to_ldisc(struct work_struct *work)
 							flag_buf, count);
 			spin_lock_irqsave(&tty->buf.lock, flags);
 		}
-		/* Restore the queue head */
-		tty->buf.head = head;
+		clear_bit(TTY_FLUSHING, &tty->flags);
 	}
+
 	/* We may have a deferred request to flush the input buffer,
 	   if so pull the chain under the lock and empty the queue */
 	if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
@@ -455,7 +453,6 @@ static void flush_to_ldisc(struct work_struct *work)
 		clear_bit(TTY_FLUSHPENDING, &tty->flags);
 		wake_up(&tty->read_wait);
 	}
-	clear_bit(TTY_FLUSHING, &tty->flags);
 	spin_unlock_irqrestore(&tty->buf.lock, flags);
 
 	tty_ldisc_deref(disc);
@@ -471,7 +468,7 @@ static void flush_to_ldisc(struct work_struct *work)
  */
 void tty_flush_to_ldisc(struct tty_struct *tty)
 {
-	flush_to_ldisc(&tty->buf.work.work);
+	flush_delayed_work(&tty->buf.work);
 }
 
 /**
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index aafdbaebc16a..feb55075819b 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -518,7 +518,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 static int tty_ldisc_halt(struct tty_struct *tty)
 {
 	clear_bit(TTY_LDISC, &tty->flags);
-	return cancel_delayed_work(&tty->buf.work);
+	return cancel_delayed_work_sync(&tty->buf.work);
 }
 
 /**
@@ -756,12 +756,9 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	 * N_TTY.
 	 */
 	if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
-		/* Make sure the old ldisc is quiescent */
-		tty_ldisc_halt(tty);
-		flush_scheduled_work();
-
 		/* Avoid racing set_ldisc or tty_ldisc_release */
 		mutex_lock(&tty->ldisc_mutex);
+		tty_ldisc_halt(tty);
 		if (tty->ldisc) {	/* Not yet closed */
 			/* Switch back to N_TTY */
 			tty_ldisc_reinit(tty);
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 0d328b59568d..a035ae39a359 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -31,7 +31,6 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/virtio.h>
-#include <linux/virtio_ids.h>
 #include <linux/virtio_console.h>
 #include "hvc_console.h"
 
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 29c651ab0d78..ed86d3bf249a 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -981,8 +981,10 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 			goto eperm;
 
 		if (copy_from_user(&vsa, (struct vt_setactivate __user *)arg,
-						sizeof(struct vt_setactivate)))
-			return -EFAULT;
+					sizeof(struct vt_setactivate))) {
+			ret = -EFAULT;
+			goto out;
+		}
 		if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
 			ret = -ENXIO;
 		else {
@@ -1530,7 +1532,7 @@ long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
 
 	case PIO_UNIMAP:
 	case GIO_UNIMAP:
-		ret = do_unimap_ioctl(cmd, up, perm, vc);
+		ret = compat_unimap_ioctl(cmd, up, perm, vc);
 		break;
 
 	/*
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index f40ab699860f..4846d50199f3 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -559,7 +559,7 @@ static int hwicap_release(struct inode *inode, struct file *file)
 	return status;
 }
 
-static struct file_operations hwicap_fops = {
+static const struct file_operations hwicap_fops = {
 	.owner = THIS_MODULE,
 	.write = hwicap_write,
 	.read = hwicap_read,
diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c
index abf4a2529f80..60697909ebdb 100644
--- a/drivers/connector/cn_proc.c
+++ b/drivers/connector/cn_proc.c
@@ -227,7 +227,8 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack)
  * cn_proc_mcast_ctl
  * @data: message sent from userspace via the connector
  */
-static void cn_proc_mcast_ctl(struct cn_msg *msg)
+static void cn_proc_mcast_ctl(struct cn_msg *msg,
+			      struct netlink_skb_parms *nsp)
 {
 	enum proc_cn_mcast_op *mc_op = NULL;
 	int err = 0;
diff --git a/drivers/connector/cn_queue.c b/drivers/connector/cn_queue.c
index 4a1dfe1f4ba9..210338ea222f 100644
--- a/drivers/connector/cn_queue.c
+++ b/drivers/connector/cn_queue.c
@@ -78,18 +78,20 @@ void cn_queue_wrapper(struct work_struct *work)
 	struct cn_callback_entry *cbq =
 		container_of(work, struct cn_callback_entry, work);
 	struct cn_callback_data *d = &cbq->data;
+	struct cn_msg *msg = NLMSG_DATA(nlmsg_hdr(d->skb));
+	struct netlink_skb_parms *nsp = &NETLINK_CB(d->skb);
 
-	d->callback(d->callback_priv);
+	d->callback(msg, nsp);
 
-	d->destruct_data(d->ddata);
-	d->ddata = NULL;
+	kfree_skb(d->skb);
+	d->skb = NULL;
 
 	kfree(d->free);
 }
 
 static struct cn_callback_entry *
 cn_queue_alloc_callback_entry(char *name, struct cb_id *id,
-			      void (*callback)(struct cn_msg *))
+			      void (*callback)(struct cn_msg *, struct netlink_skb_parms *))
 {
 	struct cn_callback_entry *cbq;
 
@@ -123,7 +125,7 @@ int cn_cb_equal(struct cb_id *i1, struct cb_id *i2)
 }
 
 int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id,
-			  void (*callback)(struct cn_msg *))
+			  void (*callback)(struct cn_msg *, struct netlink_skb_parms *))
 {
 	struct cn_callback_entry *cbq, *__cbq;
 	int found = 0;
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index 74f52af79563..f06024668f99 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -129,21 +129,19 @@ EXPORT_SYMBOL_GPL(cn_netlink_send);
 /*
  * Callback helper - queues work and setup destructor for given data.
  */
-static int cn_call_callback(struct cn_msg *msg, void (*destruct_data)(void *), void *data)
+static int cn_call_callback(struct sk_buff *skb)
 {
 	struct cn_callback_entry *__cbq, *__new_cbq;
 	struct cn_dev *dev = &cdev;
+	struct cn_msg *msg = NLMSG_DATA(nlmsg_hdr(skb));
 	int err = -ENODEV;
 
 	spin_lock_bh(&dev->cbdev->queue_lock);
 	list_for_each_entry(__cbq, &dev->cbdev->queue_list, callback_entry) {
 		if (cn_cb_equal(&__cbq->id.id, &msg->id)) {
 			if (likely(!work_pending(&__cbq->work) &&
-					__cbq->data.ddata == NULL)) {
-				__cbq->data.callback_priv = msg;
-
-				__cbq->data.ddata = data;
-				__cbq->data.destruct_data = destruct_data;
+					__cbq->data.skb == NULL)) {
+				__cbq->data.skb = skb;
 
 				if (queue_cn_work(__cbq, &__cbq->work))
 					err = 0;
@@ -156,10 +154,8 @@ static int cn_call_callback(struct cn_msg *msg, void (*destruct_data)(void *), v
 				__new_cbq = kzalloc(sizeof(struct cn_callback_entry), GFP_ATOMIC);
 				if (__new_cbq) {
 					d = &__new_cbq->data;
-					d->callback_priv = msg;
+					d->skb = skb;
 					d->callback = __cbq->data.callback;
-					d->ddata = data;
-					d->destruct_data = destruct_data;
 					d->free = __new_cbq;
 
 					__new_cbq->pdev = __cbq->pdev;
@@ -191,7 +187,6 @@ static int cn_call_callback(struct cn_msg *msg, void (*destruct_data)(void *), v
  */
 static void cn_rx_skb(struct sk_buff *__skb)
 {
-	struct cn_msg *msg;
 	struct nlmsghdr *nlh;
 	int err;
 	struct sk_buff *skb;
@@ -208,8 +203,7 @@ static void cn_rx_skb(struct sk_buff *__skb)
 			return;
 		}
 
-		msg = NLMSG_DATA(nlh);
-		err = cn_call_callback(msg, (void (*)(void *))kfree_skb, skb);
+		err = cn_call_callback(skb);
 		if (err < 0)
 			kfree_skb(skb);
 	}
@@ -270,7 +264,7 @@ static void cn_notify(struct cb_id *id, u32 notify_event)
  * May sleep.
  */
 int cn_add_callback(struct cb_id *id, char *name,
-		    void (*callback)(struct cn_msg *))
+		    void (*callback)(struct cn_msg *, struct netlink_skb_parms *))
 {
 	int err;
 	struct cn_dev *dev = &cdev;
@@ -352,7 +346,7 @@ static int cn_ctl_msg_equals(struct cn_ctl_msg *m1, struct cn_ctl_msg *m2)
  *
  * Used for notification of a request's processing.
  */
-static void cn_callback(struct cn_msg *msg)
+static void cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
 	struct cn_ctl_msg *ctl;
 	struct cn_ctl_entry *ent;
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index ad41f19b8e3f..12fdd3987a36 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -76,8 +76,11 @@ static void cpuidle_idle_call(void)
 #endif
 	/* ask the governor for the next state */
 	next_state = cpuidle_curr_governor->select(dev);
-	if (need_resched())
+	if (need_resched()) {
+		local_irq_enable();
 		return;
+	}
+
 	target_state = &dev->states[next_state];
 
 	/* enter the state and update stats */
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index 76cb6b345e7b..0af80577dc7b 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -24,6 +24,12 @@
 #include <asm/i387.h>
 #include "padlock.h"
 
+#ifdef CONFIG_64BIT
+#define STACK_ALIGN 16
+#else
+#define STACK_ALIGN 4
+#endif
+
 struct padlock_sha_desc {
 	struct shash_desc fallback;
 };
@@ -64,7 +70,9 @@ static int padlock_sha1_finup(struct shash_desc *desc, const u8 *in,
 	/* We can't store directly to *out as it may be unaligned. */
 	/* BTW Don't reduce the buffer size below 128 Bytes!
 	 *     PadLock microcode needs it that big. */
-	char result[128] __attribute__ ((aligned(PADLOCK_ALIGNMENT)));
+	char buf[128 + PADLOCK_ALIGNMENT - STACK_ALIGN] __attribute__
+		((aligned(STACK_ALIGN)));
+	char *result = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
 	struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
 	struct sha1_state state;
 	unsigned int space;
@@ -128,7 +136,9 @@ static int padlock_sha256_finup(struct shash_desc *desc, const u8 *in,
 	/* We can't store directly to *out as it may be unaligned. */
 	/* BTW Don't reduce the buffer size below 128 Bytes!
 	 *     PadLock microcode needs it that big. */
-	char result[128] __attribute__ ((aligned(PADLOCK_ALIGNMENT)));
+	char buf[128 + PADLOCK_ALIGNMENT - STACK_ALIGN] __attribute__
+		((aligned(STACK_ALIGN)));
+	char *result = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
 	struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
 	struct sha256_state state;
 	unsigned int space;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 02127e59fe8e..55c9c59b3f71 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -47,6 +47,18 @@ config EDAC_DEBUG_VERBOSE
 	  Source file name and line number where debugging message
 	  printed will be added to debugging message.
 
+ config EDAC_DECODE_MCE
+	tristate "Decode MCEs in human-readable form (only on AMD for now)"
+	depends on CPU_SUP_AMD && X86_MCE
+	default y
+	---help---
+	  Enable this option if you want to decode Machine Check Exceptions
+	  occuring on your machine in human-readable form.
+
+	  You should definitely say Y here in case you want to decode MCEs
+	  which occur really early upon boot, before the module infrastructure
+	  has been initialized.
+
 config EDAC_MM_EDAC
 	tristate "Main Memory EDAC (Error Detection And Correction) reporting"
 	help
@@ -59,7 +71,7 @@ config EDAC_MM_EDAC
 
 config EDAC_AMD64
 	tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
-	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && CPU_SUP_AMD
+	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE
 	help
 	  Support for error detection and correction on the AMD 64
 	  Families of Memory Controllers (K8, F10h and F11h)
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 7a473bbe8abd..bc5dc232a0fb 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -6,7 +6,6 @@
 # GNU General Public License.
 #
 
-
 obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
 
@@ -17,9 +16,7 @@ ifdef CONFIG_PCI
 edac_core-objs	+= edac_pci.o edac_pci_sysfs.o
 endif
 
-ifdef CONFIG_CPU_SUP_AMD
-edac_core-objs  += edac_mce_amd.o
-endif
+obj-$(CONFIG_EDAC_DECODE_MCE)		+= edac_mce_amd.o
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
 obj-$(CONFIG_EDAC_CPC925)		+= cpc925_edac.o
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 4e551e63b6dc..d4560d9d5a83 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -15,8 +15,8 @@ module_param(ecc_enable_override, int, 0644);
 
 /* Lookup table for all possible MC control instances */
 struct amd64_pvt;
-static struct mem_ctl_info *mci_lookup[MAX_NUMNODES];
-static struct amd64_pvt *pvt_lookup[MAX_NUMNODES];
+static struct mem_ctl_info *mci_lookup[EDAC_MAX_NUMNODES];
+static struct amd64_pvt *pvt_lookup[EDAC_MAX_NUMNODES];
 
 /*
  * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
@@ -189,7 +189,10 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
 /* Map from a CSROW entry to the mask entry that operates on it */
 static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow)
 {
-	return csrow >> (pvt->num_dcsm >> 3);
+	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F)
+		return csrow;
+	else
+		return csrow >> 1;
 }
 
 /* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */
@@ -279,29 +282,26 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
 	intlv_en = pvt->dram_IntlvEn[0];
 
 	if (intlv_en == 0) {
-		for (node_id = 0; ; ) {
+		for (node_id = 0; node_id < DRAM_REG_COUNT; node_id++) {
 			if (amd64_base_limit_match(pvt, sys_addr, node_id))
-				break;
-
-			if (++node_id >= DRAM_REG_COUNT)
-				goto err_no_match;
+				goto found;
 		}
-		goto found;
+		goto err_no_match;
 	}
 
-	if (unlikely((intlv_en != (0x01 << 8)) &&
-		     (intlv_en != (0x03 << 8)) &&
-		     (intlv_en != (0x07 << 8)))) {
+	if (unlikely((intlv_en != 0x01) &&
+		     (intlv_en != 0x03) &&
+		     (intlv_en != 0x07))) {
 		amd64_printk(KERN_WARNING, "junk value of 0x%x extracted from "
 			     "IntlvEn field of DRAM Base Register for node 0: "
-			     "This probably indicates a BIOS bug.\n", intlv_en);
+			     "this probably indicates a BIOS bug.\n", intlv_en);
 		return NULL;
 	}
 
 	bits = (((u32) sys_addr) >> 12) & intlv_en;
 
 	for (node_id = 0; ; ) {
-		if ((pvt->dram_limit[node_id] & intlv_en) == bits)
+		if ((pvt->dram_IntlvSel[node_id] & intlv_en) == bits)
 			break;	/* intlv_sel field matches */
 
 		if (++node_id >= DRAM_REG_COUNT)
@@ -311,10 +311,10 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
 	/* sanity test for sys_addr */
 	if (unlikely(!amd64_base_limit_match(pvt, sys_addr, node_id))) {
 		amd64_printk(KERN_WARNING,
-			  "%s(): sys_addr 0x%lx falls outside base/limit "
-			  "address range for node %d with node interleaving "
-			  "enabled.\n", __func__, (unsigned long)sys_addr,
-			  node_id);
+			     "%s(): sys_addr 0x%llx falls outside base/limit "
+			     "address range for node %d with node interleaving "
+			     "enabled.\n",
+			     __func__, sys_addr, node_id);
 		return NULL;
 	}
 
@@ -377,7 +377,7 @@ static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr)
 	 * base/mask register pair, test the condition shown near the start of
 	 * section 3.5.4 (p. 84, BKDG #26094, K8, revA-E).
 	 */
-	for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+	for (csrow = 0; csrow < pvt->cs_count; csrow++) {
 
 		/* This DRAM chip select is disabled on this node */
 		if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0)
@@ -734,7 +734,7 @@ static void find_csrow_limits(struct mem_ctl_info *mci, int csrow,
 	u64 base, mask;
 
 	pvt = mci->pvt_info;
-	BUG_ON((csrow < 0) || (csrow >= CHIPSELECT_COUNT));
+	BUG_ON((csrow < 0) || (csrow >= pvt->cs_count));
 
 	base = base_from_dct_base(pvt, csrow);
 	mask = mask_from_dct_mask(pvt, csrow);
@@ -962,35 +962,27 @@ err_reg:
  */
 static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
 {
-	if (pvt->ext_model >= OPTERON_CPU_REV_F) {
+
+	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F) {
+		pvt->dcsb_base		= REV_E_DCSB_BASE_BITS;
+		pvt->dcsm_mask		= REV_E_DCSM_MASK_BITS;
+		pvt->dcs_mask_notused	= REV_E_DCS_NOTUSED_BITS;
+		pvt->dcs_shift		= REV_E_DCS_SHIFT;
+		pvt->cs_count		= 8;
+		pvt->num_dcsm		= 8;
+	} else {
 		pvt->dcsb_base		= REV_F_F1Xh_DCSB_BASE_BITS;
 		pvt->dcsm_mask		= REV_F_F1Xh_DCSM_MASK_BITS;
 		pvt->dcs_mask_notused	= REV_F_F1Xh_DCS_NOTUSED_BITS;
 		pvt->dcs_shift		= REV_F_F1Xh_DCS_SHIFT;
 
-		switch (boot_cpu_data.x86) {
-		case 0xf:
-			pvt->num_dcsm = REV_F_DCSM_COUNT;
-			break;
-
-		case 0x10:
-			pvt->num_dcsm = F10_DCSM_COUNT;
-			break;
-
-		case 0x11:
-			pvt->num_dcsm = F11_DCSM_COUNT;
-			break;
-
-		default:
-			amd64_printk(KERN_ERR, "Unsupported family!\n");
-			break;
+		if (boot_cpu_data.x86 == 0x11) {
+			pvt->cs_count = 4;
+			pvt->num_dcsm = 2;
+		} else {
+			pvt->cs_count = 8;
+			pvt->num_dcsm = 4;
 		}
-	} else {
-		pvt->dcsb_base		= REV_E_DCSB_BASE_BITS;
-		pvt->dcsm_mask		= REV_E_DCSM_MASK_BITS;
-		pvt->dcs_mask_notused	= REV_E_DCS_NOTUSED_BITS;
-		pvt->dcs_shift		= REV_E_DCS_SHIFT;
-		pvt->num_dcsm		= REV_E_DCSM_COUNT;
 	}
 }
 
@@ -1003,7 +995,7 @@ static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
 
 	amd64_set_dct_base_and_mask(pvt);
 
-	for (cs = 0; cs < CHIPSELECT_COUNT; cs++) {
+	for (cs = 0; cs < pvt->cs_count; cs++) {
 		reg = K8_DCSB0 + (cs * 4);
 		err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
 						&pvt->dcsb0[cs]);
@@ -1193,7 +1185,7 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 	 * different from the node that detected the error.
 	 */
 	src_mci = find_mc_by_sys_addr(mci, SystemAddress);
-	if (src_mci) {
+	if (!src_mci) {
 		amd64_mc_printk(mci, KERN_ERR,
 			     "failed to map error address 0x%lx to a node\n",
 			     (unsigned long)SystemAddress);
@@ -1376,8 +1368,8 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 
 	pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
 
-	pvt->dram_base[dram] = (((((u64) high_base & 0x000000FF) << 32) |
-				((u64) low_base & 0xFFFF0000))) << 8;
+	pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) |
+			       (((u64)low_base  & 0xFFFF0000) << 8);
 
 	low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
 	high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
@@ -1398,9 +1390,9 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	 * Extract address values and form a LIMIT address. Limit is the HIGHEST
 	 * memory location of the region, so low 24 bits need to be all ones.
 	 */
-	low_limit |= 0x0000FFFF;
-	pvt->dram_limit[dram] =
-		((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF);
+	pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) |
+				(((u64) low_limit & 0xFFFF0000) << 8) |
+				0x00FFFFFF;
 }
 
 static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
@@ -1566,7 +1558,7 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs)
 
 	debugf1("InputAddr=0x%x  channelselect=%d\n", in_addr, cs);
 
-	for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+	for (csrow = 0; csrow < pvt->cs_count; csrow++) {
 
 		cs_base = amd64_get_dct_base(pvt, cs, csrow);
 		if (!(cs_base & K8_DCSB_CS_ENABLE))
@@ -2497,7 +2489,7 @@ err_reg:
  * NOTE: CPU Revision Dependent code
  *
  * Input:
- *	@csrow_nr ChipSelect Row Number (0..CHIPSELECT_COUNT-1)
+ *	@csrow_nr ChipSelect Row Number (0..pvt->cs_count-1)
  *	k8 private pointer to -->
  *			DRAM Bank Address mapping register
  *			node_id
@@ -2577,7 +2569,7 @@ static int amd64_init_csrows(struct mem_ctl_info *mci)
 		(pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"
 		);
 
-	for (i = 0; i < CHIPSELECT_COUNT; i++) {
+	for (i = 0; i < pvt->cs_count; i++) {
 		csrow = &mci->csrows[i];
 
 		if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) {
@@ -2988,7 +2980,7 @@ static int amd64_init_2nd_stage(struct amd64_pvt *pvt)
 		goto err_exit;
 
 	ret = -ENOMEM;
-	mci = edac_mc_alloc(0, CHIPSELECT_COUNT, pvt->channel_count, node_id);
+	mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, node_id);
 	if (!mci)
 		goto err_exit;
 
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 8ea07e2715dc..c6f359a85207 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -132,6 +132,8 @@
 #define EDAC_AMD64_VERSION		" Ver: 3.2.0 " __DATE__
 #define EDAC_MOD_STR			"amd64_edac"
 
+#define EDAC_MAX_NUMNODES		8
+
 /* Extended Model from CPUID, for CPU Revision numbers */
 #define OPTERON_CPU_LE_REV_C		0
 #define OPTERON_CPU_REV_D		1
@@ -142,7 +144,7 @@
 #define OPTERON_CPU_REV_FA		5
 
 /* Hardware limit on ChipSelect rows per MC and processors per system */
-#define CHIPSELECT_COUNT		8
+#define MAX_CS_COUNT			8
 #define DRAM_REG_COUNT			8
 
 
@@ -193,7 +195,6 @@
  */
 #define REV_E_DCSB_BASE_BITS		(0xFFE0FE00ULL)
 #define REV_E_DCS_SHIFT			4
-#define REV_E_DCSM_COUNT		8
 
 #define REV_F_F1Xh_DCSB_BASE_BITS	(0x1FF83FE0ULL)
 #define REV_F_F1Xh_DCS_SHIFT		8
@@ -204,9 +205,6 @@
  */
 #define REV_F_DCSB_BASE_BITS		(0x1FF83FE0ULL)
 #define REV_F_DCS_SHIFT			8
-#define REV_F_DCSM_COUNT		4
-#define F10_DCSM_COUNT			4
-#define F11_DCSM_COUNT			2
 
 /* DRAM CS Mask Registers */
 #define K8_DCSM0			0x60
@@ -374,13 +372,11 @@ enum {
 
 #define SET_NB_DRAM_INJECTION_WRITE(word, bits)  \
 					(BIT(((word) & 0xF) + 20) | \
-					BIT(17) |  \
-					((bits) & 0xF))
+					BIT(17) | bits)
 
 #define SET_NB_DRAM_INJECTION_READ(word, bits)  \
 					(BIT(((word) & 0xF) + 20) | \
-					BIT(16) |  \
-					((bits) & 0xF))
+					BIT(16) |  bits)
 
 #define K8_NBCAP			0xE8
 #define K8_NBCAP_CORES			(BIT(12)|BIT(13))
@@ -445,12 +441,12 @@ struct amd64_pvt {
 	u32 dbam1;		/* DRAM Base Address Mapping reg for DCT1 */
 
 	/* DRAM CS Base Address Registers F2x[1,0][5C:40] */
-	u32 dcsb0[CHIPSELECT_COUNT];
-	u32 dcsb1[CHIPSELECT_COUNT];
+	u32 dcsb0[MAX_CS_COUNT];
+	u32 dcsb1[MAX_CS_COUNT];
 
 	/* DRAM CS Mask Registers F2x[1,0][6C:60] */
-	u32 dcsm0[CHIPSELECT_COUNT];
-	u32 dcsm1[CHIPSELECT_COUNT];
+	u32 dcsm0[MAX_CS_COUNT];
+	u32 dcsm1[MAX_CS_COUNT];
 
 	/*
 	 * Decoded parts of DRAM BASE and LIMIT Registers
@@ -470,6 +466,7 @@ struct amd64_pvt {
 	 */
 	u32 dcsb_base;		/* DCSB base bits */
 	u32 dcsm_mask;		/* DCSM mask bits */
+	u32 cs_count;		/* num chip selects (== num DCSB registers) */
 	u32 num_dcsm;		/* Number of DCSM registers */
 	u32 dcs_mask_notused;	/* DCSM notused mask bits */
 	u32 dcs_shift;		/* DCSB and DCSM shift value */
diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c
index d3675b76b3a7..29f1f7a612d9 100644
--- a/drivers/edac/amd64_edac_inj.c
+++ b/drivers/edac/amd64_edac_inj.c
@@ -1,5 +1,11 @@
 #include "amd64_edac.h"
 
+static ssize_t amd64_inject_section_show(struct mem_ctl_info *mci, char *buf)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	return sprintf(buf, "0x%x\n", pvt->injection.section);
+}
+
 /*
  * store error injection section value which refers to one of 4 16-byte sections
  * within a 64-byte cacheline
@@ -15,12 +21,26 @@ static ssize_t amd64_inject_section_store(struct mem_ctl_info *mci,
 
 	ret = strict_strtoul(data, 10, &value);
 	if (ret != -EINVAL) {
+
+		if (value > 3) {
+			amd64_printk(KERN_WARNING,
+				     "%s: invalid section 0x%lx\n",
+				     __func__, value);
+			return -EINVAL;
+		}
+
 		pvt->injection.section = (u32) value;
 		return count;
 	}
 	return ret;
 }
 
+static ssize_t amd64_inject_word_show(struct mem_ctl_info *mci, char *buf)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	return sprintf(buf, "0x%x\n", pvt->injection.word);
+}
+
 /*
  * store error injection word value which refers to one of 9 16-bit word of the
  * 16-byte (128-bit + ECC bits) section
@@ -37,14 +57,25 @@ static ssize_t amd64_inject_word_store(struct mem_ctl_info *mci,
 	ret = strict_strtoul(data, 10, &value);
 	if (ret != -EINVAL) {
 
-		value = (value <= 8) ? value : 0;
-		pvt->injection.word = (u32) value;
+		if (value > 8) {
+			amd64_printk(KERN_WARNING,
+				     "%s: invalid word 0x%lx\n",
+				     __func__, value);
+			return -EINVAL;
+		}
 
+		pvt->injection.word = (u32) value;
 		return count;
 	}
 	return ret;
 }
 
+static ssize_t amd64_inject_ecc_vector_show(struct mem_ctl_info *mci, char *buf)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	return sprintf(buf, "0x%x\n", pvt->injection.bit_map);
+}
+
 /*
  * store 16 bit error injection vector which enables injecting errors to the
  * corresponding bit within the error injection word above. When used during a
@@ -60,8 +91,14 @@ static ssize_t amd64_inject_ecc_vector_store(struct mem_ctl_info *mci,
 	ret = strict_strtoul(data, 16, &value);
 	if (ret != -EINVAL) {
 
-		pvt->injection.bit_map = (u32) value & 0xFFFF;
+		if (value & 0xFFFF0000) {
+			amd64_printk(KERN_WARNING,
+				     "%s: invalid EccVector: 0x%lx\n",
+				     __func__, value);
+			return -EINVAL;
+		}
 
+		pvt->injection.bit_map = (u32) value;
 		return count;
 	}
 	return ret;
@@ -147,7 +184,7 @@ struct mcidev_sysfs_attribute amd64_inj_attrs[] = {
 			.name = "inject_section",
 			.mode = (S_IRUGO | S_IWUSR)
 		},
-		.show = NULL,
+		.show = amd64_inject_section_show,
 		.store = amd64_inject_section_store,
 	},
 	{
@@ -155,7 +192,7 @@ struct mcidev_sysfs_attribute amd64_inj_attrs[] = {
 			.name = "inject_word",
 			.mode = (S_IRUGO | S_IWUSR)
 		},
-		.show = NULL,
+		.show = amd64_inject_word_show,
 		.store = amd64_inject_word_store,
 	},
 	{
@@ -163,7 +200,7 @@ struct mcidev_sysfs_attribute amd64_inj_attrs[] = {
 			.name = "inject_ecc_vector",
 			.mode = (S_IRUGO | S_IWUSR)
 		},
-		.show = NULL,
+		.show = amd64_inject_ecc_vector_show,
 		.store = amd64_inject_ecc_vector_store,
 	},
 	{
diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c
index 0c21c370c9dd..713ed7d37247 100644
--- a/drivers/edac/edac_mce_amd.c
+++ b/drivers/edac/edac_mce_amd.c
@@ -3,6 +3,7 @@
 
 static bool report_gart_errors;
 static void (*nb_bus_decoder)(int node_id, struct err_regs *regs);
+static void (*orig_mce_callback)(struct mce *m);
 
 void amd_report_gart_errors(bool v)
 {
@@ -362,7 +363,7 @@ static inline void amd_decode_err_code(unsigned int ec)
 		pr_warning("Huh? Unknown MCE error 0x%x\n", ec);
 }
 
-void decode_mce(struct mce *m)
+static void amd_decode_mce(struct mce *m)
 {
 	struct err_regs regs;
 	int node, ecc;
@@ -420,3 +421,32 @@ void decode_mce(struct mce *m)
 
 	amd_decode_err_code(m->status & 0xffff);
 }
+
+static int __init mce_amd_init(void)
+{
+	/*
+	 * We can decode MCEs for Opteron and later CPUs:
+	 */
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
+	    (boot_cpu_data.x86 >= 0xf)) {
+		/* safe the default decode mce callback */
+		orig_mce_callback = x86_mce_decode_callback;
+
+		x86_mce_decode_callback = amd_decode_mce;
+	}
+
+	return 0;
+}
+early_initcall(mce_amd_init);
+
+#ifdef MODULE
+static void __exit mce_amd_exit(void)
+{
+	x86_mce_decode_callback = orig_mce_callback;
+}
+
+MODULE_DESCRIPTION("AMD MCE decoder");
+MODULE_ALIAS("edac-mce-amd");
+MODULE_LICENSE("GPL");
+module_exit(mce_amd_exit);
+#endif
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index d335086f4a26..77a9579d7167 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1173,7 +1173,7 @@ static void i5000_get_mc_regs(struct mem_ctl_info *mci)
 			pci_read_config_word(pvt->branch_1, where,
 					&pvt->b1_mtr[slot_row]);
 			debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row,
-				where, pvt->b0_mtr[slot_row]);
+				where, pvt->b1_mtr[slot_row]);
 		} else {
 			pvt->b1_mtr[slot_row] = 0;
 		}
@@ -1232,7 +1232,7 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
 	struct csrow_info *p_csrow;
 	int empty, channel_count;
 	int max_csrows;
-	int mtr;
+	int mtr, mtr1;
 	int csrow_megs;
 	int channel;
 	int csrow;
@@ -1251,9 +1251,10 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
 
 		/* use branch 0 for the basis */
 		mtr = pvt->b0_mtr[csrow >> 1];
+		mtr1 = pvt->b1_mtr[csrow >> 1];
 
 		/* if no DIMMS on this row, continue */
-		if (!MTR_DIMMS_PRESENT(mtr))
+		if (!MTR_DIMMS_PRESENT(mtr) && !MTR_DIMMS_PRESENT(mtr1))
 			continue;
 
 		/* FAKE OUT VALUES, FIXME */
diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c
index b08b6d8e2dc7..f99d10655ed4 100644
--- a/drivers/edac/i5400_edac.c
+++ b/drivers/edac/i5400_edac.c
@@ -46,9 +46,10 @@
 /* Limits for i5400 */
 #define NUM_MTRS_PER_BRANCH	4
 #define CHANNELS_PER_BRANCH	2
+#define MAX_DIMMS_PER_CHANNEL	NUM_MTRS_PER_BRANCH
 #define	MAX_CHANNELS		4
-#define MAX_DIMMS		(MAX_CHANNELS * 4)	/* Up to 4 DIMM's per channel */
-#define MAX_CSROWS		(MAX_DIMMS * 2)		/* max possible csrows per channel */
+/* max possible csrows per channel */
+#define MAX_CSROWS		(MAX_DIMMS_PER_CHANNEL)
 
 /* Device 16,
  * Function 0: System Address
@@ -331,7 +332,6 @@ static const struct i5400_dev_info i5400_devs[] = {
 
 struct i5400_dimm_info {
 	int megabytes;		/* size, 0 means not present  */
-	int dual_rank;
 };
 
 /* driver private data structure */
@@ -849,11 +849,9 @@ static int determine_mtr(struct i5400_pvt *pvt, int csrow, int channel)
 	int n;
 
 	/* There is one MTR for each slot pair of FB-DIMMs,
-	   Each slot may have one or two ranks (2 csrows),
 	   Each slot pair may be at branch 0 or branch 1.
-	   So, csrow should be divided by eight
 	 */
-	n = csrow >> 3;
+	n = csrow;
 
 	if (n >= NUM_MTRS_PER_BRANCH) {
 		debugf0("ERROR: trying to access an invalid csrow: %d\n",
@@ -905,25 +903,22 @@ static void handle_channel(struct i5400_pvt *pvt, int csrow, int channel,
 		amb_present_reg = determine_amb_present_reg(pvt, channel);
 
 		/* Determine if there is a DIMM present in this DIMM slot */
-		if (amb_present_reg & (1 << (csrow >> 1))) {
-			dinfo->dual_rank = MTR_DIMM_RANK(mtr);
-
-			if (!((dinfo->dual_rank == 0) &&
-				((csrow & 0x1) == 0x1))) {
-				/* Start with the number of bits for a Bank
-				 * on the DRAM */
-				addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
-				/* Add thenumber of ROW bits */
-				addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
-				/* add the number of COLUMN bits */
-				addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
-
-				addrBits += 6;	/* add 64 bits per DIMM */
-				addrBits -= 20;	/* divide by 2^^20 */
-				addrBits -= 3;	/* 8 bits per bytes */
-
-				dinfo->megabytes = 1 << addrBits;
-			}
+		if (amb_present_reg & (1 << csrow)) {
+			/* Start with the number of bits for a Bank
+			 * on the DRAM */
+			addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
+			/* Add thenumber of ROW bits */
+			addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+			/* add the number of COLUMN bits */
+			addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+			/* add the number of RANK bits */
+			addrBits += MTR_DIMM_RANK(mtr);
+
+			addrBits += 6;	/* add 64 bits per DIMM */
+			addrBits -= 20;	/* divide by 2^^20 */
+			addrBits -= 3;	/* 8 bits per bytes */
+
+			dinfo->megabytes = 1 << addrBits;
 		}
 	}
 }
@@ -951,12 +946,12 @@ static void calculate_dimm_size(struct i5400_pvt *pvt)
 		return;
 	}
 
-	/* Scan all the actual CSROWS (which is # of DIMMS * 2)
+	/* Scan all the actual CSROWS
 	 * and calculate the information for each DIMM
 	 * Start with the highest csrow first, to display it first
 	 * and work toward the 0th csrow
 	 */
-	max_csrows = pvt->maxdimmperch * 2;
+	max_csrows = pvt->maxdimmperch;
 	for (csrow = max_csrows - 1; csrow >= 0; csrow--) {
 
 		/* on an odd csrow, first output a 'boundary' marker,
@@ -1064,7 +1059,7 @@ static void i5400_get_mc_regs(struct mem_ctl_info *mci)
 
 	/* Get the set of MTR[0-3] regs by each branch */
 	for (slot_row = 0; slot_row < NUM_MTRS_PER_BRANCH; slot_row++) {
-		int where = MTR0 + (slot_row * sizeof(u32));
+		int where = MTR0 + (slot_row * sizeof(u16));
 
 		/* Branch 0 set of MTR registers */
 		pci_read_config_word(pvt->branch_0, where,
@@ -1146,7 +1141,7 @@ static int i5400_init_csrows(struct mem_ctl_info *mci)
 	pvt = mci->pvt_info;
 
 	channel_count = pvt->maxch;
-	max_csrows = pvt->maxdimmperch * 2;
+	max_csrows = pvt->maxdimmperch;
 
 	empty = 1;		/* Assume NO memory */
 
@@ -1215,28 +1210,6 @@ static void i5400_enable_error_reporting(struct mem_ctl_info *mci)
 }
 
 /*
- * i5400_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels)
- *
- *	ask the device how many channels are present and how many CSROWS
- *	 as well
- */
-static void i5400_get_dimm_and_channel_counts(struct pci_dev *pdev,
-					int *num_dimms_per_channel,
-					int *num_channels)
-{
-	u8 value;
-
-	/* Need to retrieve just how many channels and dimms per channel are
-	 * supported on this memory controller
-	 */
-	pci_read_config_byte(pdev, MAXDIMMPERCH, &value);
-	*num_dimms_per_channel = (int)value * 2;
-
-	pci_read_config_byte(pdev, MAXCH, &value);
-	*num_channels = (int)value;
-}
-
-/*
  *	i5400_probe1	Probe for ONE instance of device to see if it is
  *			present.
  *	return:
@@ -1263,22 +1236,16 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx)
 	if (PCI_FUNC(pdev->devfn) != 0)
 		return -ENODEV;
 
-	/* Ask the devices for the number of CSROWS and CHANNELS so
-	 * that we can calculate the memory resources, etc
-	 *
-	 * The Chipset will report what it can handle which will be greater
-	 * or equal to what the motherboard manufacturer will implement.
-	 *
-	 * As we don't have a motherboard identification routine to determine
+	/* As we don't have a motherboard identification routine to determine
 	 * actual number of slots/dimms per channel, we thus utilize the
 	 * resource as specified by the chipset. Thus, we might have
 	 * have more DIMMs per channel than actually on the mobo, but this
 	 * allows the driver to support upto the chipset max, without
 	 * some fancy mobo determination.
 	 */
-	i5400_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
-					&num_channels);
-	num_csrows = num_dimms_per_channel * 2;
+	num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL;
+	num_channels = MAX_CHANNELS;
+	num_csrows = num_dimms_per_channel;
 
 	debugf0("MC: %s(): Number of - Channels= %d  DIMMS= %d  CSROWS= %d\n",
 		__func__, num_channels, num_dimms_per_channel, num_csrows);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 157f6504f25e..cf27402af97b 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -26,7 +26,9 @@
 #include "mpc85xx_edac.h"
 
 static int edac_dev_idx;
+#ifdef CONFIG_PCI
 static int edac_pci_idx;
+#endif
 static int edac_mc_idx;
 
 static u32 orig_ddr_err_disable;
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index ced186d7e9a9..5089331544ed 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -33,6 +33,7 @@
 #include <linux/mutex.h>
 #include <linux/poll.h>
 #include <linux/preempt.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/time.h>
 #include <linux/uaccess.h>
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 50f0176de615..98dbbda3ad41 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -188,14 +188,7 @@ static struct fw_device *target_device(struct sbp2_target *tgt)
 /* Impossible login_id, to detect logout attempt before successful login */
 #define INVALID_LOGIN_ID 0x10000
 
-/*
- * Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be
- * provided in the config rom. Most devices do provide a value, which
- * we'll use for login management orbs, but with some sane limits.
- */
-#define SBP2_MIN_LOGIN_ORB_TIMEOUT	5000U	/* Timeout in ms */
-#define SBP2_MAX_LOGIN_ORB_TIMEOUT	40000U	/* Timeout in ms */
-#define SBP2_ORB_TIMEOUT		2000U	/* Timeout in ms */
+#define SBP2_ORB_TIMEOUT		2000U		/* Timeout in ms */
 #define SBP2_ORB_NULL			0x80000000
 #define SBP2_RETRY_LIMIT		0xf		/* 15 retries */
 #define SBP2_CYCLE_LIMIT		(0xc8 << 12)	/* 200 125us cycles */
@@ -1034,7 +1027,6 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory,
 {
 	struct fw_csr_iterator ci;
 	int key, value;
-	unsigned int timeout;
 
 	fw_csr_iterator_init(&ci, directory);
 	while (fw_csr_iterator_next(&ci, &key, &value)) {
@@ -1059,17 +1051,7 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory,
 
 		case SBP2_CSR_UNIT_CHARACTERISTICS:
 			/* the timeout value is stored in 500ms units */
-			timeout = ((unsigned int) value >> 8 & 0xff) * 500;
-			timeout = max(timeout, SBP2_MIN_LOGIN_ORB_TIMEOUT);
-			tgt->mgt_orb_timeout =
-				  min(timeout, SBP2_MAX_LOGIN_ORB_TIMEOUT);
-
-			if (timeout > tgt->mgt_orb_timeout)
-				fw_notify("%s: config rom contains %ds "
-					  "management ORB timeout, limiting "
-					  "to %ds\n", tgt->bus_id,
-					  timeout / 1000,
-					  tgt->mgt_orb_timeout / 1000);
+			tgt->mgt_orb_timeout = (value >> 8 & 0xff) * 500;
 			break;
 
 		case SBP2_CSR_LOGICAL_UNIT_NUMBER:
@@ -1087,6 +1069,22 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory,
 	return 0;
 }
 
+/*
+ * Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be
+ * provided in the config rom. Most devices do provide a value, which
+ * we'll use for login management orbs, but with some sane limits.
+ */
+static void sbp2_clamp_management_orb_timeout(struct sbp2_target *tgt)
+{
+	unsigned int timeout = tgt->mgt_orb_timeout;
+
+	if (timeout > 40000)
+		fw_notify("%s: %ds mgt_ORB_timeout limited to 40s\n",
+			  tgt->bus_id, timeout / 1000);
+
+	tgt->mgt_orb_timeout = clamp_val(timeout, 5000, 40000);
+}
+
 static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
 				  u32 firmware_revision)
 {
@@ -1171,6 +1169,7 @@ static int sbp2_probe(struct device *dev)
 			       &firmware_revision) < 0)
 		goto fail_tgt_put;
 
+	sbp2_clamp_management_orb_timeout(tgt);
 	sbp2_init_workarounds(tgt, model, firmware_revision);
 
 	/*
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 420a96e7f2db..051d1ebbd287 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -939,7 +939,7 @@ static int __init ibft_init(void)
 
 	if (ibft_addr) {
 		printk(KERN_INFO "iBFT detected at 0x%llx.\n",
-		       (u64)virt_to_phys((void *)ibft_addr));
+		       (u64)isa_virt_to_bus(ibft_addr));
 
 		rc = ibft_check_device();
 		if (rc)
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index d53fbbfefa3e..dfb15c06c88f 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -65,10 +65,10 @@ void __init reserve_ibft_region(void)
 		 * so skip that area */
 		if (pos == VGA_MEM)
 			pos += VGA_SIZE;
-		virt = phys_to_virt(pos);
+		virt = isa_bus_to_virt(pos);
 		if (memcmp(virt, IBFT_SIGN, IBFT_SIGN_LEN) == 0) {
 			unsigned long *addr =
-			    (unsigned long *)phys_to_virt(pos + 4);
+			    (unsigned long *)isa_bus_to_virt(pos + 4);
 			len = *addr;
 			/* if the length of the table extends past 1M,
 			 * the table cannot be valid. */
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index bb11a429394a..662ed923d9eb 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1487,7 +1487,7 @@ static int gpiolib_open(struct inode *inode, struct file *file)
 	return single_open(file, gpiolib_show, NULL);
 }
 
-static struct file_operations gpiolib_operations = {
+static const struct file_operations gpiolib_operations = {
 	.open		= gpiolib_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c
index afad14792141..49384a7c5492 100644
--- a/drivers/gpio/twl4030-gpio.c
+++ b/drivers/gpio/twl4030-gpio.c
@@ -460,7 +460,8 @@ no_irqs:
 	return ret;
 }
 
-static int __devexit gpio_twl4030_remove(struct platform_device *pdev)
+/* Cannot use __devexit as gpio_twl4030_probe() calls us */
+static int gpio_twl4030_remove(struct platform_device *pdev)
 {
 	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
 	int status;
@@ -493,7 +494,7 @@ static struct platform_driver gpio_twl4030_driver = {
 	.driver.name	= "twl4030_gpio",
 	.driver.owner	= THIS_MODULE,
 	.probe		= gpio_twl4030_probe,
-	.remove		= __devexit_p(gpio_twl4030_remove),
+	.remove		= gpio_twl4030_remove,
 };
 
 static int __init gpio_twl4030_init(void)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index ba728ad77f2a..5cae0b3eee9b 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -482,6 +482,7 @@ void drm_connector_cleanup(struct drm_connector *connector)
 	list_for_each_entry_safe(mode, t, &connector->user_modes, head)
 		drm_mode_remove(connector, mode);
 
+	kfree(connector->fb_helper_private);
 	mutex_lock(&dev->mode_config.mutex);
 	drm_mode_object_put(dev, &connector->base);
 	list_del(&connector->head);
@@ -1555,8 +1556,6 @@ int drm_mode_cursor_ioctl(struct drm_device *dev,
 	struct drm_crtc *crtc;
 	int ret = 0;
 
-	DRM_DEBUG_KMS("\n");
-
 	if (!req->flags) {
 		DRM_ERROR("no operation set\n");
 		return -EINVAL;
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index fe8697447f32..1fe4e1d344fd 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -32,6 +32,7 @@
 #include "drmP.h"
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
 
 static void drm_mode_validate_flag(struct drm_connector *connector,
 				   int flags)
@@ -90,7 +91,15 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 	list_for_each_entry_safe(mode, t, &connector->modes, head)
 		mode->status = MODE_UNVERIFIED;
 
-	connector->status = connector->funcs->detect(connector);
+	if (connector->force) {
+		if (connector->force == DRM_FORCE_ON)
+			connector->status = connector_status_connected;
+		else
+			connector->status = connector_status_disconnected;
+		if (connector->funcs->force)
+			connector->funcs->force(connector);
+	} else
+		connector->status = connector->funcs->detect(connector);
 
 	if (connector->status == connector_status_disconnected) {
 		DRM_DEBUG_KMS("%s is disconnected\n",
@@ -267,6 +276,65 @@ static struct drm_display_mode *drm_has_preferred_mode(struct drm_connector *con
 	return NULL;
 }
 
+static bool drm_has_cmdline_mode(struct drm_connector *connector)
+{
+	struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+	struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+	if (!fb_help_conn)
+		return false;
+
+	cmdline_mode = &fb_help_conn->cmdline_mode;
+	return cmdline_mode->specified;
+}
+
+static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_connector *connector, int width, int height)
+{
+	struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+	struct drm_fb_helper_cmdline_mode *cmdline_mode;
+	struct drm_display_mode *mode = NULL;
+
+	if (!fb_help_conn)
+		return mode;
+
+	cmdline_mode = &fb_help_conn->cmdline_mode;
+	if (cmdline_mode->specified == false)
+		return mode;
+
+	/* attempt to find a matching mode in the list of modes
+	 *  we have gotten so far, if not add a CVT mode that conforms
+	 */
+	if (cmdline_mode->rb || cmdline_mode->margins)
+		goto create_mode;
+
+	list_for_each_entry(mode, &connector->modes, head) {
+		/* check width/height */
+		if (mode->hdisplay != cmdline_mode->xres ||
+		    mode->vdisplay != cmdline_mode->yres)
+			continue;
+
+		if (cmdline_mode->refresh_specified) {
+			if (mode->vrefresh != cmdline_mode->refresh)
+				continue;
+		}
+
+		if (cmdline_mode->interlace) {
+			if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
+				continue;
+		}
+		return mode;
+	}
+
+create_mode:
+	mode = drm_cvt_mode(connector->dev, cmdline_mode->xres,
+			    cmdline_mode->yres,
+			    cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+			    cmdline_mode->rb, cmdline_mode->interlace,
+			    cmdline_mode->margins);
+	list_add(&mode->head, &connector->modes);
+	return mode;
+}
+
 static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
 {
 	bool enable;
@@ -317,10 +385,16 @@ static bool drm_target_preferred(struct drm_device *dev,
 			continue;
 		}
 
-		DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
-			  connector->base.id);
+		DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
+			      connector->base.id);
 
-		modes[i] = drm_has_preferred_mode(connector, width, height);
+		/* got for command line mode first */
+		modes[i] = drm_pick_cmdline_mode(connector, width, height);
+		if (!modes[i]) {
+			DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
+				      connector->base.id);
+			modes[i] = drm_has_preferred_mode(connector, width, height);
+		}
 		/* No preferred modes, pick one off the list */
 		if (!modes[i] && !list_empty(&connector->modes)) {
 			list_for_each_entry(modes[i], &connector->modes, head)
@@ -369,6 +443,8 @@ static int drm_pick_crtcs(struct drm_device *dev,
 	my_score = 1;
 	if (connector->status == connector_status_connected)
 		my_score++;
+	if (drm_has_cmdline_mode(connector))
+		my_score++;
 	if (drm_has_preferred_mode(connector, width, height))
 		my_score++;
 
@@ -943,6 +1019,8 @@ bool drm_helper_initial_config(struct drm_device *dev)
 {
 	int count = 0;
 
+	drm_fb_helper_parse_command_line(dev);
+
 	count = drm_helper_probe_connector_modes(dev,
 						 dev->mode_config.max_width,
 						 dev->mode_config.max_height);
@@ -950,7 +1028,7 @@ bool drm_helper_initial_config(struct drm_device *dev)
 	/*
 	 * we shouldn't end up with no modes here.
 	 */
-	WARN(!count, "Connected connector with 0 modes\n");
+	WARN(!count, "No connectors reported connected with modes\n");
 
 	drm_setup_crtcs(dev);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 90d76bacff17..cea665d86dd3 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -109,7 +109,9 @@ static struct edid_quirk {
 
 
 /* Valid EDID header has these bytes */
-static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
+static const u8 edid_header[] = {
+	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
+};
 
 /**
  * edid_is_valid - sanity check EDID data
@@ -500,6 +502,19 @@ static struct drm_display_mode *drm_find_dmt(struct drm_device *dev,
 	}
 	return mode;
 }
+
+/*
+ * 0 is reserved.  The spec says 0x01 fill for unused timings.  Some old
+ * monitors fill with ascii space (0x20) instead.
+ */
+static int
+bad_std_timing(u8 a, u8 b)
+{
+	return (a == 0x00 && b == 0x00) ||
+	       (a == 0x01 && b == 0x01) ||
+	       (a == 0x20 && b == 0x20);
+}
+
 /**
  * drm_mode_std - convert standard mode info (width, height, refresh) into mode
  * @t: standard timing params
@@ -513,6 +528,7 @@ static struct drm_display_mode *drm_find_dmt(struct drm_device *dev,
  */
 struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 				      struct std_timing *t,
+				      int revision,
 				      int timing_level)
 {
 	struct drm_display_mode *mode;
@@ -523,14 +539,20 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 	unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
 		>> EDID_TIMING_VFREQ_SHIFT;
 
+	if (bad_std_timing(t->hsize, t->vfreq_aspect))
+		return NULL;
+
 	/* According to the EDID spec, the hdisplay = hsize * 8 + 248 */
 	hsize = t->hsize * 8 + 248;
 	/* vrefresh_rate = vfreq + 60 */
 	vrefresh_rate = vfreq + 60;
 	/* the vdisplay is calculated based on the aspect ratio */
-	if (aspect_ratio == 0)
-		vsize = (hsize * 10) / 16;
-	else if (aspect_ratio == 1)
+	if (aspect_ratio == 0) {
+		if (revision < 3)
+			vsize = hsize;
+		else
+			vsize = (hsize * 10) / 16;
+	} else if (aspect_ratio == 1)
 		vsize = (hsize * 3) / 4;
 	else if (aspect_ratio == 2)
 		vsize = (hsize * 4) / 5;
@@ -538,7 +560,8 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 		vsize = (hsize * 9) / 16;
 	/* HDTV hack */
 	if (hsize == 1360 && vsize == 765 && vrefresh_rate == 60) {
-		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
+				    false);
 		mode->hdisplay = 1366;
 		mode->vsync_start = mode->vsync_start - 1;
 		mode->vsync_end = mode->vsync_end - 1;
@@ -557,7 +580,8 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 		mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
 		break;
 	case LEVEL_CVT:
-		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
+				    false);
 		break;
 	}
 	return mode;
@@ -602,6 +626,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 		return NULL;
 	}
 
+	/* it is incorrect if hsync/vsync width is zero */
+	if (!hsync_pulse_width || !vsync_pulse_width) {
+		DRM_DEBUG_KMS("Incorrect Detailed timing. "
+				"Wrong Hsync/Vsync pulse width\n");
+		return NULL;
+	}
 	mode = drm_mode_create(dev);
 	if (!mode)
 		return NULL;
@@ -623,6 +653,15 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	mode->vsync_end = mode->vsync_start + vsync_pulse_width;
 	mode->vtotal = mode->vdisplay + vblank;
 
+	/* perform the basic check for the detailed timing */
+	if (mode->hsync_end > mode->htotal ||
+		mode->vsync_end > mode->vtotal) {
+		drm_mode_destroy(dev, mode);
+		DRM_DEBUG_KMS("Incorrect detailed timing. "
+				"Sync is beyond the blank.\n");
+		return NULL;
+	}
+
 	drm_mode_set_name(mode);
 
 	if (pt->misc & DRM_EDID_PT_INTERLACED)
@@ -779,7 +818,7 @@ static int add_standard_modes(struct drm_connector *connector, struct edid *edid
 			continue;
 
 		newmode = drm_mode_std(dev, &edid->standard_timings[i],
-					timing_level);
+				       edid->revision, timing_level);
 		if (newmode) {
 			drm_mode_probed_add(connector, newmode);
 			modes++;
@@ -829,13 +868,13 @@ static int add_detailed_info(struct drm_connector *connector,
 			case EDID_DETAIL_MONITOR_CPDATA:
 				break;
 			case EDID_DETAIL_STD_MODES:
-				/* Five modes per detailed section */
-				for (j = 0; j < 5; i++) {
+				for (j = 0; j < 6; i++) {
 					struct std_timing *std;
 					struct drm_display_mode *newmode;
 
 					std = &data->data.timings[j];
 					newmode = drm_mode_std(dev, std,
+							       edid->revision,
 							       timing_level);
 					if (newmode) {
 						drm_mode_probed_add(connector, newmode);
@@ -964,7 +1003,9 @@ static int add_detailed_info_eedid(struct drm_connector *connector,
 				struct drm_display_mode *newmode;
 
 				std = &data->data.timings[j];
-				newmode = drm_mode_std(dev, std, timing_level);
+				newmode = drm_mode_std(dev, std,
+						       edid->revision,
+						       timing_level);
 				if (newmode) {
 					drm_mode_probed_add(connector, newmode);
 					modes++;
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 2c4671314884..9c924614c418 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -40,6 +40,199 @@ MODULE_LICENSE("GPL and additional rights");
 
 static LIST_HEAD(kernel_fb_helper_list);
 
+int drm_fb_helper_add_connector(struct drm_connector *connector)
+{
+	connector->fb_helper_private = kzalloc(sizeof(struct drm_fb_helper_connector), GFP_KERNEL);
+	if (!connector->fb_helper_private)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_fb_helper_add_connector);
+
+static int my_atoi(const char *name)
+{
+	int val = 0;
+
+	for (;; name++) {
+		switch (*name) {
+		case '0' ... '9':
+			val = 10*val+(*name-'0');
+			break;
+		default:
+			return val;
+		}
+	}
+}
+
+/**
+ * drm_fb_helper_connector_parse_command_line - parse command line for connector
+ * @connector - connector to parse line for
+ * @mode_option - per connector mode option
+ *
+ * This parses the connector specific then generic command lines for
+ * modes and options to configure the connector.
+ *
+ * This uses the same parameters as the fb modedb.c, except for extra
+ *	<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
+ *
+ * enable/enable Digital/disable bit at the end
+ */
+static bool drm_fb_helper_connector_parse_command_line(struct drm_connector *connector,
+						       const char *mode_option)
+{
+	const char *name;
+	unsigned int namelen;
+	int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
+	unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0;
+	int yres_specified = 0, cvt = 0, rb = 0, interlace = 0, margins = 0;
+	int i;
+	enum drm_connector_force force = DRM_FORCE_UNSPECIFIED;
+	struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+	struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+	if (!fb_help_conn)
+		return false;
+
+	cmdline_mode = &fb_help_conn->cmdline_mode;
+	if (!mode_option)
+		mode_option = fb_mode_option;
+
+	if (!mode_option) {
+		cmdline_mode->specified = false;
+		return false;
+	}
+
+	name = mode_option;
+	namelen = strlen(name);
+	for (i = namelen-1; i >= 0; i--) {
+		switch (name[i]) {
+		case '@':
+			namelen = i;
+			if (!refresh_specified && !bpp_specified &&
+			    !yres_specified) {
+				refresh = my_atoi(&name[i+1]);
+				refresh_specified = 1;
+				if (cvt || rb)
+					cvt = 0;
+			} else
+				goto done;
+			break;
+		case '-':
+			namelen = i;
+			if (!bpp_specified && !yres_specified) {
+				bpp = my_atoi(&name[i+1]);
+				bpp_specified = 1;
+				if (cvt || rb)
+					cvt = 0;
+			} else
+				goto done;
+			break;
+		case 'x':
+			if (!yres_specified) {
+				yres = my_atoi(&name[i+1]);
+				yres_specified = 1;
+			} else
+				goto done;
+		case '0' ... '9':
+			break;
+		case 'M':
+			if (!yres_specified)
+				cvt = 1;
+			break;
+		case 'R':
+			if (!cvt)
+				rb = 1;
+			break;
+		case 'm':
+			if (!cvt)
+				margins = 1;
+			break;
+		case 'i':
+			if (!cvt)
+				interlace = 1;
+			break;
+		case 'e':
+			force = DRM_FORCE_ON;
+			break;
+		case 'D':
+			if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) ||
+			    (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB))
+				force = DRM_FORCE_ON;
+			else
+				force = DRM_FORCE_ON_DIGITAL;
+			break;
+		case 'd':
+			force = DRM_FORCE_OFF;
+			break;
+		default:
+			goto done;
+		}
+	}
+	if (i < 0 && yres_specified) {
+		xres = my_atoi(name);
+		res_specified = 1;
+	}
+done:
+
+	DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+		drm_get_connector_name(connector), xres, yres,
+		(refresh) ? refresh : 60, (rb) ? " reduced blanking" :
+		"", (margins) ? " with margins" : "", (interlace) ?
+		" interlaced" : "");
+
+	if (force) {
+		const char *s;
+		switch (force) {
+		case DRM_FORCE_OFF: s = "OFF"; break;
+		case DRM_FORCE_ON_DIGITAL: s = "ON - dig"; break;
+		default:
+		case DRM_FORCE_ON: s = "ON"; break;
+		}
+
+		DRM_INFO("forcing %s connector %s\n",
+			 drm_get_connector_name(connector), s);
+		connector->force = force;
+	}
+
+	if (res_specified) {
+		cmdline_mode->specified = true;
+		cmdline_mode->xres = xres;
+		cmdline_mode->yres = yres;
+	}
+
+	if (refresh_specified) {
+		cmdline_mode->refresh_specified = true;
+		cmdline_mode->refresh = refresh;
+	}
+
+	if (bpp_specified) {
+		cmdline_mode->bpp_specified = true;
+		cmdline_mode->bpp = bpp;
+	}
+	cmdline_mode->rb = rb ? true : false;
+	cmdline_mode->cvt = cvt  ? true : false;
+	cmdline_mode->interlace = interlace ? true : false;
+
+	return true;
+}
+
+int drm_fb_helper_parse_command_line(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		char *option = NULL;
+
+		/* do something on return - turn off connector maybe */
+		if (fb_get_options(drm_get_connector_name(connector), &option))
+			continue;
+
+		drm_fb_helper_connector_parse_command_line(connector, option);
+	}
+	return 0;
+}
+
 bool drm_fb_helper_force_kernel_mode(void)
 {
 	int i = 0;
@@ -87,6 +280,7 @@ void drm_fb_helper_restore(void)
 }
 EXPORT_SYMBOL(drm_fb_helper_restore);
 
+#ifdef CONFIG_MAGIC_SYSRQ
 static void drm_fb_helper_restore_work_fn(struct work_struct *ignored)
 {
 	drm_fb_helper_restore();
@@ -103,6 +297,7 @@ static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = {
 	.help_msg = "force-fb(V)",
 	.action_msg = "Restore framebuffer console",
 };
+#endif
 
 static void drm_fb_helper_on(struct fb_info *info)
 {
@@ -259,6 +454,109 @@ out_free:
 }
 EXPORT_SYMBOL(drm_fb_helper_init_crtc_count);
 
+static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
+		     u16 blue, u16 regno, struct fb_info *info)
+{
+	struct drm_fb_helper *fb_helper = info->par;
+	struct drm_framebuffer *fb = fb_helper->fb;
+	int pindex;
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+		u32 *palette;
+		u32 value;
+		/* place color in psuedopalette */
+		if (regno > 16)
+			return -EINVAL;
+		palette = (u32 *)info->pseudo_palette;
+		red >>= (16 - info->var.red.length);
+		green >>= (16 - info->var.green.length);
+		blue >>= (16 - info->var.blue.length);
+		value = (red << info->var.red.offset) |
+			(green << info->var.green.offset) |
+			(blue << info->var.blue.offset);
+		palette[regno] = value;
+		return 0;
+	}
+
+	pindex = regno;
+
+	if (fb->bits_per_pixel == 16) {
+		pindex = regno << 3;
+
+		if (fb->depth == 16 && regno > 63)
+			return -EINVAL;
+		if (fb->depth == 15 && regno > 31)
+			return -EINVAL;
+
+		if (fb->depth == 16) {
+			u16 r, g, b;
+			int i;
+			if (regno < 32) {
+				for (i = 0; i < 8; i++)
+					fb_helper->funcs->gamma_set(crtc, red,
+						green, blue, pindex + i);
+			}
+
+			fb_helper->funcs->gamma_get(crtc, &r,
+						    &g, &b,
+						    pindex >> 1);
+
+			for (i = 0; i < 4; i++)
+				fb_helper->funcs->gamma_set(crtc, r,
+							    green, b,
+							    (pindex >> 1) + i);
+		}
+	}
+
+	if (fb->depth != 16)
+		fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex);
+	return 0;
+}
+
+int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
+{
+	struct drm_fb_helper *fb_helper = info->par;
+	struct drm_device *dev = fb_helper->dev;
+	u16 *red, *green, *blue, *transp;
+	struct drm_crtc *crtc;
+	int i, rc = 0;
+	int start;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+		for (i = 0; i < fb_helper->crtc_count; i++) {
+			if (crtc->base.id == fb_helper->crtc_info[i].crtc_id)
+				break;
+		}
+		if (i == fb_helper->crtc_count)
+			continue;
+
+		red = cmap->red;
+		green = cmap->green;
+		blue = cmap->blue;
+		transp = cmap->transp;
+		start = cmap->start;
+
+		for (i = 0; i < cmap->len; i++) {
+			u16 hred, hgreen, hblue, htransp = 0xffff;
+
+			hred = *red++;
+			hgreen = *green++;
+			hblue = *blue++;
+
+			if (transp)
+				htransp = *transp++;
+
+			rc = setcolreg(crtc, hred, hgreen, hblue, start++, info);
+			if (rc)
+				return rc;
+		}
+		crtc_funcs->load_lut(crtc);
+	}
+	return rc;
+}
+EXPORT_SYMBOL(drm_fb_helper_setcmap);
+
 int drm_fb_helper_setcolreg(unsigned regno,
 			    unsigned red,
 			    unsigned green,
@@ -270,10 +568,13 @@ int drm_fb_helper_setcolreg(unsigned regno,
 	struct drm_device *dev = fb_helper->dev;
 	struct drm_crtc *crtc;
 	int i;
+	int ret;
 
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		struct drm_framebuffer *fb = fb_helper->fb;
+	if (regno > 255)
+		return 1;
 
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 		for (i = 0; i < fb_helper->crtc_count; i++) {
 			if (crtc->base.id == fb_helper->crtc_info[i].crtc_id)
 				break;
@@ -281,35 +582,11 @@ int drm_fb_helper_setcolreg(unsigned regno,
 		if (i == fb_helper->crtc_count)
 			continue;
 
-		if (regno > 255)
-			return 1;
-
-		if (fb->depth == 8) {
-			fb_helper->funcs->gamma_set(crtc, red, green, blue, regno);
-			return 0;
-		}
+		ret = setcolreg(crtc, red, green, blue, regno, info);
+		if (ret)
+			return ret;
 
-		if (regno < 16) {
-			switch (fb->depth) {
-			case 15:
-				fb->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
-					((green & 0xf800) >>  6) |
-					((blue & 0xf800) >> 11);
-				break;
-			case 16:
-				fb->pseudo_palette[regno] = (red & 0xf800) |
-					((green & 0xfc00) >>  5) |
-					((blue  & 0xf800) >> 11);
-				break;
-			case 24:
-			case 32:
-				fb->pseudo_palette[regno] =
-					(((red >> 8) & 0xff) << info->var.red.offset) |
-					(((green >> 8) & 0xff) << info->var.green.offset) |
-					(((blue >> 8) & 0xff) << info->var.blue.offset);
-				break;
-			}
-		}
+		crtc_funcs->load_lut(crtc);
 	}
 	return 0;
 }
@@ -479,11 +756,14 @@ int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
 EXPORT_SYMBOL(drm_fb_helper_pan_display);
 
 int drm_fb_helper_single_fb_probe(struct drm_device *dev,
+				  int preferred_bpp,
 				  int (*fb_create)(struct drm_device *dev,
 						   uint32_t fb_width,
 						   uint32_t fb_height,
 						   uint32_t surface_width,
 						   uint32_t surface_height,
+						   uint32_t surface_depth,
+						   uint32_t surface_bpp,
 						   struct drm_framebuffer **fb_ptr))
 {
 	struct drm_crtc *crtc;
@@ -497,8 +777,48 @@ int drm_fb_helper_single_fb_probe(struct drm_device *dev,
 	struct drm_framebuffer *fb;
 	struct drm_mode_set *modeset = NULL;
 	struct drm_fb_helper *fb_helper;
+	uint32_t surface_depth = 24, surface_bpp = 32;
 
+	/* if driver picks 8 or 16 by default use that
+	   for both depth/bpp */
+	if (preferred_bpp != surface_bpp) {
+		surface_depth = surface_bpp = preferred_bpp;
+	}
 	/* first up get a count of crtcs now in use and new min/maxes width/heights */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+
+		struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+		if (!fb_help_conn)
+			continue;
+		
+		cmdline_mode = &fb_help_conn->cmdline_mode;
+
+		if (cmdline_mode->bpp_specified) {
+			switch (cmdline_mode->bpp) {
+			case 8:
+				surface_depth = surface_bpp = 8;
+				break;
+			case 15:
+				surface_depth = 15;
+				surface_bpp = 16;
+				break;
+			case 16:
+				surface_depth = surface_bpp = 16;
+				break;
+			case 24:
+				surface_depth = surface_bpp = 24;
+				break;
+			case 32:
+				surface_depth = 24;
+				surface_bpp = 32;
+				break;
+			}
+			break;
+		}
+	}
+
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		if (drm_helper_crtc_in_use(crtc)) {
 			if (crtc->desired_mode) {
@@ -527,7 +847,8 @@ int drm_fb_helper_single_fb_probe(struct drm_device *dev,
 	/* do we have an fb already? */
 	if (list_empty(&dev->mode_config.fb_kernel_list)) {
 		ret = (*fb_create)(dev, fb_width, fb_height, surface_width,
-				   surface_height, &fb);
+				   surface_height, surface_depth, surface_bpp,
+				   &fb);
 		if (ret)
 			return -EINVAL;
 		new_fb = 1;
@@ -618,10 +939,12 @@ void drm_fb_helper_free(struct drm_fb_helper *helper)
 }
 EXPORT_SYMBOL(drm_fb_helper_free);
 
-void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch)
+void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
+			    uint32_t depth)
 {
 	info->fix.type = FB_TYPE_PACKED_PIXELS;
-	info->fix.visual = FB_VISUAL_TRUECOLOR;
+	info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR :
+		FB_VISUAL_TRUECOLOR;
 	info->fix.type_aux = 0;
 	info->fix.xpanstep = 1; /* doing it in hw */
 	info->fix.ypanstep = 1; /* doing it in hw */
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 49404ce1666e..51f677215f1d 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -88,7 +88,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);
 #define HV_FACTOR			1000
 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
 				      int vdisplay, int vrefresh,
-				      bool reduced, bool interlaced)
+				      bool reduced, bool interlaced, bool margins)
 {
 	/* 1) top/bottom margin size (% of height) - default: 1.8, */
 #define	CVT_MARGIN_PERCENTAGE		18
@@ -101,7 +101,6 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
 	/* Pixel Clock step (kHz) */
 #define CVT_CLOCK_STEP			250
 	struct drm_display_mode *drm_mode;
-	bool margins = false;
 	unsigned int vfieldrate, hperiod;
 	int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync;
 	int interlace;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 45d507ebd3ff..92aeb918e0c0 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1468,6 +1468,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	spin_lock_init(&dev_priv->user_irq_lock);
 	spin_lock_init(&dev_priv->error_lock);
 	dev_priv->user_irq_refcount = 0;
+	dev_priv->trace_irq_seqno = 0;
 
 	ret = drm_vblank_init(dev, I915_NUM_PIPE);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b24b2d145b75..6035d3dae851 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -202,6 +202,7 @@ typedef struct drm_i915_private {
 	spinlock_t user_irq_lock;
 	/** Refcount for i915_user_irq_get() versus i915_user_irq_put(). */
 	int user_irq_refcount;
+	u32 trace_irq_seqno;
 	/** Cached value of IMR to avoid reads in updating the bitfield */
 	u32 irq_mask_reg;
 	u32 pipestat[2];
@@ -665,6 +666,7 @@ extern int i915_irq_emit(struct drm_device *dev, void *data,
 extern int i915_irq_wait(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv);
 void i915_user_irq_get(struct drm_device *dev);
+void i915_trace_irq_get(struct drm_device *dev, u32 seqno);
 void i915_user_irq_put(struct drm_device *dev);
 extern void i915_enable_interrupt (struct drm_device *dev);
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 40727d4c2919..abfc27b0c2ea 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1770,7 +1770,7 @@ i915_gem_retire_requests(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	uint32_t seqno;
 
-	if (!dev_priv->hw_status_page)
+	if (!dev_priv->hw_status_page || list_empty(&dev_priv->mm.request_list))
 		return;
 
 	seqno = i915_get_gem_seqno(dev);
@@ -1794,6 +1794,12 @@ i915_gem_retire_requests(struct drm_device *dev)
 		} else
 			break;
 	}
+
+	if (unlikely (dev_priv->trace_irq_seqno &&
+		      i915_seqno_passed(dev_priv->trace_irq_seqno, seqno))) {
+		i915_user_irq_put(dev);
+		dev_priv->trace_irq_seqno = 0;
+	}
 }
 
 void
@@ -3352,7 +3358,7 @@ i915_dispatch_gem_execbuffer(struct drm_device *dev,
 	exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
 	exec_len = (uint32_t) exec->batch_len;
 
-	trace_i915_gem_request_submit(dev, dev_priv->mm.next_gem_seqno);
+	trace_i915_gem_request_submit(dev, dev_priv->mm.next_gem_seqno + 1);
 
 	count = nbox ? nbox : 1;
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 4dfeec7cdd42..c3ceffa46ea0 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -725,6 +725,16 @@ void i915_user_irq_put(struct drm_device *dev)
 	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
+void i915_trace_irq_get(struct drm_device *dev, u32 seqno)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
+	if (dev_priv->trace_irq_seqno == 0)
+		i915_user_irq_get(dev);
+
+	dev_priv->trace_irq_seqno = seqno;
+}
+
 static int i915_wait_irq(struct drm_device * dev, int irq_nr)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
diff --git a/drivers/gpu/drm/i915/i915_trace.h b/drivers/gpu/drm/i915/i915_trace.h
index 5567a40816f3..01840d9bc38f 100644
--- a/drivers/gpu/drm/i915/i915_trace.h
+++ b/drivers/gpu/drm/i915/i915_trace.h
@@ -158,16 +158,17 @@ TRACE_EVENT(i915_gem_request_submit,
 	    TP_ARGS(dev, seqno),
 
 	    TP_STRUCT__entry(
-			     __field(struct drm_device *, dev)
+			     __field(u32, dev)
 			     __field(u32, seqno)
 			     ),
 
 	    TP_fast_assign(
-			   __entry->dev = dev;
+			   __entry->dev = dev->primary->index;
 			   __entry->seqno = seqno;
+			   i915_trace_irq_get(dev, seqno);
 			   ),
 
-	    TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+	    TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
 );
 
 TRACE_EVENT(i915_gem_request_flush,
@@ -178,20 +179,20 @@ TRACE_EVENT(i915_gem_request_flush,
 	    TP_ARGS(dev, seqno, flush_domains, invalidate_domains),
 
 	    TP_STRUCT__entry(
-			     __field(struct drm_device *, dev)
+			     __field(u32, dev)
 			     __field(u32, seqno)
 			     __field(u32, flush_domains)
 			     __field(u32, invalidate_domains)
 			     ),
 
 	    TP_fast_assign(
-			   __entry->dev = dev;
+			   __entry->dev = dev->primary->index;
 			   __entry->seqno = seqno;
 			   __entry->flush_domains = flush_domains;
 			   __entry->invalidate_domains = invalidate_domains;
 			   ),
 
-	    TP_printk("dev=%p, seqno=%u, flush=%04x, invalidate=%04x",
+	    TP_printk("dev=%u, seqno=%u, flush=%04x, invalidate=%04x",
 		      __entry->dev, __entry->seqno,
 		      __entry->flush_domains, __entry->invalidate_domains)
 );
@@ -204,16 +205,16 @@ TRACE_EVENT(i915_gem_request_complete,
 	    TP_ARGS(dev, seqno),
 
 	    TP_STRUCT__entry(
-			     __field(struct drm_device *, dev)
+			     __field(u32, dev)
 			     __field(u32, seqno)
 			     ),
 
 	    TP_fast_assign(
-			   __entry->dev = dev;
+			   __entry->dev = dev->primary->index;
 			   __entry->seqno = seqno;
 			   ),
 
-	    TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+	    TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
 );
 
 TRACE_EVENT(i915_gem_request_retire,
@@ -223,16 +224,16 @@ TRACE_EVENT(i915_gem_request_retire,
 	    TP_ARGS(dev, seqno),
 
 	    TP_STRUCT__entry(
-			     __field(struct drm_device *, dev)
+			     __field(u32, dev)
 			     __field(u32, seqno)
 			     ),
 
 	    TP_fast_assign(
-			   __entry->dev = dev;
+			   __entry->dev = dev->primary->index;
 			   __entry->seqno = seqno;
 			   ),
 
-	    TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+	    TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
 );
 
 TRACE_EVENT(i915_gem_request_wait_begin,
@@ -242,16 +243,16 @@ TRACE_EVENT(i915_gem_request_wait_begin,
 	    TP_ARGS(dev, seqno),
 
 	    TP_STRUCT__entry(
-			     __field(struct drm_device *, dev)
+			     __field(u32, dev)
 			     __field(u32, seqno)
 			     ),
 
 	    TP_fast_assign(
-			   __entry->dev = dev;
+			   __entry->dev = dev->primary->index;
 			   __entry->seqno = seqno;
 			   ),
 
-	    TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+	    TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
 );
 
 TRACE_EVENT(i915_gem_request_wait_end,
@@ -261,16 +262,16 @@ TRACE_EVENT(i915_gem_request_wait_end,
 	    TP_ARGS(dev, seqno),
 
 	    TP_STRUCT__entry(
-			     __field(struct drm_device *, dev)
+			     __field(u32, dev)
 			     __field(u32, seqno)
 			     ),
 
 	    TP_fast_assign(
-			   __entry->dev = dev;
+			   __entry->dev = dev->primary->index;
 			   __entry->seqno = seqno;
 			   ),
 
-	    TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+	    TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
 );
 
 TRACE_EVENT(i915_ring_wait_begin,
@@ -280,14 +281,14 @@ TRACE_EVENT(i915_ring_wait_begin,
 	    TP_ARGS(dev),
 
 	    TP_STRUCT__entry(
-			     __field(struct drm_device *, dev)
+			     __field(u32, dev)
 			     ),
 
 	    TP_fast_assign(
-			   __entry->dev = dev;
+			   __entry->dev = dev->primary->index;
 			   ),
 
-	    TP_printk("dev=%p", __entry->dev)
+	    TP_printk("dev=%u", __entry->dev)
 );
 
 TRACE_EVENT(i915_ring_wait_end,
@@ -297,14 +298,14 @@ TRACE_EVENT(i915_ring_wait_end,
 	    TP_ARGS(dev),
 
 	    TP_STRUCT__entry(
-			     __field(struct drm_device *, dev)
+			     __field(u32, dev)
 			     ),
 
 	    TP_fast_assign(
-			   __entry->dev = dev;
+			   __entry->dev = dev->primary->index;
 			   ),
 
-	    TP_printk("dev=%p", __entry->dev)
+	    TP_printk("dev=%u", __entry->dev)
 );
 
 #endif /* _I915_TRACE_H_ */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 93ff6c03733e..3c14240cc002 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3095,7 +3095,6 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	struct drm_gem_object *bo;
 	struct drm_i915_gem_object *obj_priv;
 	int pipe = intel_crtc->pipe;
-	int plane = intel_crtc->plane;
 	uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
 	uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
 	uint32_t temp = I915_READ(control);
@@ -3182,9 +3181,6 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 		drm_gem_object_unreference(intel_crtc->cursor_bo);
 	}
 
-	if ((IS_I965G(dev) || plane == 0))
-		intel_update_fbc(crtc, &crtc->mode);
-
 	mutex_unlock(&dev->struct_mutex);
 
 	intel_crtc->cursor_addr = addr;
@@ -3244,6 +3240,16 @@ void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
 	intel_crtc->lut_b[regno] = blue >> 8;
 }
 
+void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+			     u16 *blue, int regno)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	*red = intel_crtc->lut_r[regno] << 8;
+	*green = intel_crtc->lut_g[regno] << 8;
+	*blue = intel_crtc->lut_b[regno] << 8;
+}
+
 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
 				 u16 *blue, uint32_t size)
 {
@@ -3835,6 +3841,7 @@ static const struct drm_crtc_helper_funcs intel_helper_funcs = {
 	.mode_set_base = intel_pipe_set_base,
 	.prepare = intel_crtc_prepare,
 	.commit = intel_crtc_commit,
+	.load_lut = intel_crtc_load_lut,
 };
 
 static const struct drm_crtc_funcs intel_crtc_funcs = {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 8aa4b7f30daa..ef61fe9507e2 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -175,6 +175,8 @@ extern int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc);
 extern void intelfb_restore(void);
 extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
 				    u16 blue, int regno);
+extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+				    u16 *blue, int regno);
 
 extern int intel_framebuffer_create(struct drm_device *dev,
 				    struct drm_mode_fb_cmd *mode_cmd,
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 7ba4a232a97f..2b0fe54cd92c 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -60,10 +60,12 @@ static struct fb_ops intelfb_ops = {
 	.fb_imageblit = cfb_imageblit,
 	.fb_pan_display = drm_fb_helper_pan_display,
 	.fb_blank = drm_fb_helper_blank,
+	.fb_setcmap = drm_fb_helper_setcmap,
 };
 
 static struct drm_fb_helper_funcs intel_fb_helper_funcs = {
 	.gamma_set = intel_crtc_fb_gamma_set,
+	.gamma_get = intel_crtc_fb_gamma_get,
 };
 
 
@@ -110,6 +112,7 @@ EXPORT_SYMBOL(intelfb_resize);
 static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 			  uint32_t fb_height, uint32_t surface_width,
 			  uint32_t surface_height,
+			  uint32_t surface_depth, uint32_t surface_bpp,
 			  struct drm_framebuffer **fb_p)
 {
 	struct fb_info *info;
@@ -122,12 +125,16 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	struct device *device = &dev->pdev->dev;
 	int size, ret, mmio_bar = IS_I9XX(dev) ? 0 : 1;
 
+	/* we don't do packed 24bpp */
+	if (surface_bpp == 24)
+		surface_bpp = 32;
+
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
 
-	mode_cmd.bpp = 32;
+	mode_cmd.bpp = surface_bpp;
 	mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 1) / 8), 64);
-	mode_cmd.depth = 24;
+	mode_cmd.depth = surface_depth;
 
 	size = mode_cmd.pitch * mode_cmd.height;
 	size = ALIGN(size, PAGE_SIZE);
@@ -205,7 +212,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 
 //	memset(info->screen_base, 0, size);
 
-	drm_fb_helper_fill_fix(info, fb->pitch);
+	drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
 	drm_fb_helper_fill_var(info, fb, fb_width, fb_height);
 
 	/* FIXME: we really shouldn't expose mmio space at all */
@@ -243,7 +250,7 @@ int intelfb_probe(struct drm_device *dev)
 	int ret;
 
 	DRM_DEBUG("\n");
-	ret = drm_fb_helper_single_fb_probe(dev, intelfb_create);
+	ret = drm_fb_helper_single_fb_probe(dev, 32, intelfb_create);
 	return ret;
 }
 EXPORT_SYMBOL(intelfb_probe);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index fa304e136010..663ab6de0b58 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -223,7 +223,7 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 
 	connector = &intel_output->base;
 	drm_connector_init(dev, connector, &intel_hdmi_connector_funcs,
-			   DRM_MODE_CONNECTOR_DVID);
+			   DRM_MODE_CONNECTOR_HDMIA);
 	drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
 
 	intel_output->type = INTEL_OUTPUT_HDMI;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index c64eab493fb0..9ca917931afb 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1082,7 +1082,8 @@ intel_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mo
 	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
 
 	/* Ensure TV refresh is close to desired refresh */
-	if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode)) < 10)
+	if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode) * 1000)
+				< 1000)
 		return MODE_OK;
 	return MODE_CLOCK_RANGE;
 }
diff --git a/drivers/gpu/drm/radeon/.gitignore b/drivers/gpu/drm/radeon/.gitignore
new file mode 100644
index 000000000000..403eb3a5891f
--- /dev/null
+++ b/drivers/gpu/drm/radeon/.gitignore
@@ -0,0 +1,3 @@
+mkregtable
+*_reg_safe.h
+
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 6a015929deee..14fa9701aeb3 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -733,6 +733,7 @@ static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
 	.mode_set_base = atombios_crtc_set_base,
 	.prepare = atombios_crtc_prepare,
 	.commit = atombios_crtc_commit,
+	.load_lut = radeon_crtc_load_lut,
 };
 
 void radeon_atombios_init_crtc(struct drm_device *dev,
diff --git a/drivers/gpu/drm/radeon/avivod.h b/drivers/gpu/drm/radeon/avivod.h
index e2b92c445bab..d4e6e6e4a938 100644
--- a/drivers/gpu/drm/radeon/avivod.h
+++ b/drivers/gpu/drm/radeon/avivod.h
@@ -57,13 +57,4 @@
 #define	VGA_RENDER_CONTROL				0x0300
 #define		VGA_VSTATUS_CNTL_MASK				0x00030000
 
-/* AVIVO disable VGA rendering */
-static inline void radeon_avivo_vga_render_disable(struct radeon_device *rdev)
-{
-	u32 vga_render;
-	vga_render = RREG32(VGA_RENDER_CONTROL);
-	vga_render &= ~VGA_VSTATUS_CNTL_MASK;
-	WREG32(VGA_RENDER_CONTROL, vga_render);
-}
-
 #endif
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index be51c5f7d0f6..161094c07d94 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -32,6 +32,9 @@
 #include "radeon_reg.h"
 #include "radeon.h"
 #include "r100d.h"
+#include "rs100d.h"
+#include "rv200d.h"
+#include "rv250d.h"
 
 #include <linux/firmware.h>
 #include <linux/platform_device.h>
@@ -60,18 +63,7 @@ MODULE_FIRMWARE(FIRMWARE_R520);
 
 /* This files gather functions specifics to:
  * r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280
- *
- * Some of these functions might be used by newer ASICs.
  */
-int r200_init(struct radeon_device *rdev);
-void r100_hdp_reset(struct radeon_device *rdev);
-void r100_gpu_init(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r100_mc_wait_for_idle(struct radeon_device *rdev);
-void r100_gpu_wait_for_vsync(struct radeon_device *rdev);
-void r100_gpu_wait_for_vsync2(struct radeon_device *rdev);
-int r100_debugfs_mc_info_init(struct radeon_device *rdev);
-
 
 /*
  * PCI GART
@@ -152,136 +144,6 @@ void r100_pci_gart_fini(struct radeon_device *rdev)
 	radeon_gart_fini(rdev);
 }
 
-
-/*
- * MC
- */
-void r100_mc_disable_clients(struct radeon_device *rdev)
-{
-	uint32_t ov0_scale_cntl, crtc_ext_cntl, crtc_gen_cntl, crtc2_gen_cntl;
-
-	/* FIXME: is this function correct for rs100,rs200,rs300 ? */
-	if (r100_gui_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait GUI idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-
-	/* stop display and memory access */
-	ov0_scale_cntl = RREG32(RADEON_OV0_SCALE_CNTL);
-	WREG32(RADEON_OV0_SCALE_CNTL, ov0_scale_cntl & ~RADEON_SCALER_ENABLE);
-	crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
-	WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl | RADEON_CRTC_DISPLAY_DIS);
-	crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL);
-
-	r100_gpu_wait_for_vsync(rdev);
-
-	WREG32(RADEON_CRTC_GEN_CNTL,
-	       (crtc_gen_cntl & ~(RADEON_CRTC_CUR_EN | RADEON_CRTC_ICON_EN)) |
-	       RADEON_CRTC_DISP_REQ_EN_B | RADEON_CRTC_EXT_DISP_EN);
-
-	if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
-		crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
-
-		r100_gpu_wait_for_vsync2(rdev);
-		WREG32(RADEON_CRTC2_GEN_CNTL,
-		       (crtc2_gen_cntl &
-		        ~(RADEON_CRTC2_CUR_EN | RADEON_CRTC2_ICON_EN)) |
-		       RADEON_CRTC2_DISP_REQ_EN_B);
-	}
-
-	udelay(500);
-}
-
-void r100_mc_setup(struct radeon_device *rdev)
-{
-	uint32_t tmp;
-	int r;
-
-	r = r100_debugfs_mc_info_init(rdev);
-	if (r) {
-		DRM_ERROR("Failed to register debugfs file for R100 MC !\n");
-	}
-	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
-	/* Novell bug 204882 for RN50/M6/M7 with 8/16/32MB VRAM,
-	 * if the aperture is 64MB but we have 32MB VRAM
-	 * we report only 32MB VRAM but we have to set MC_FB_LOCATION
-	 * to 64MB, otherwise the gpu accidentially dies */
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32(RADEON_MC_FB_LOCATION, tmp);
-
-	/* Enable bus mastering */
-	tmp = RREG32(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS;
-	WREG32(RADEON_BUS_CNTL, tmp);
-
-	if (rdev->flags & RADEON_IS_AGP) {
-		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-		tmp = REG_SET(RADEON_MC_AGP_TOP, tmp >> 16);
-		tmp |= REG_SET(RADEON_MC_AGP_START, rdev->mc.gtt_location >> 16);
-		WREG32(RADEON_MC_AGP_LOCATION, tmp);
-		WREG32(RADEON_AGP_BASE, rdev->mc.agp_base);
-	} else {
-		WREG32(RADEON_MC_AGP_LOCATION, 0x0FFFFFFF);
-		WREG32(RADEON_AGP_BASE, 0);
-	}
-
-	tmp = RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL;
-	tmp |= (7 << 28);
-	WREG32(RADEON_HOST_PATH_CNTL, tmp | RADEON_HDP_SOFT_RESET | RADEON_HDP_READ_BUFFER_INVALIDATE);
-	(void)RREG32(RADEON_HOST_PATH_CNTL);
-	WREG32(RADEON_HOST_PATH_CNTL, tmp);
-	(void)RREG32(RADEON_HOST_PATH_CNTL);
-}
-
-int r100_mc_init(struct radeon_device *rdev)
-{
-	int r;
-
-	if (r100_debugfs_rbbm_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
-	}
-
-	r100_gpu_init(rdev);
-	/* Disable gart which also disable out of gart access */
-	r100_pci_gart_disable(rdev);
-
-	/* Setup GPU memory space */
-	rdev->mc.gtt_location = 0xFFFFFFFFUL;
-	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
-		} else {
-			rdev->mc.gtt_location = rdev->mc.agp_base;
-		}
-	}
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	r100_mc_disable_clients(rdev);
-	if (r100_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-
-	r100_mc_setup(rdev);
-	return 0;
-}
-
-void r100_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Interrupts
- */
 int r100_irq_set(struct radeon_device *rdev)
 {
 	uint32_t tmp = 0;
@@ -358,10 +220,6 @@ u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc)
 		return RREG32(RADEON_CRTC2_CRNT_FRAME);
 }
 
-
-/*
- * Fence emission
- */
 void r100_fence_ring_emit(struct radeon_device *rdev,
 			  struct radeon_fence *fence)
 {
@@ -377,10 +235,6 @@ void r100_fence_ring_emit(struct radeon_device *rdev,
 	radeon_ring_write(rdev, RADEON_SW_INT_FIRE);
 }
 
-
-/*
- * Writeback
- */
 int r100_wb_init(struct radeon_device *rdev)
 {
 	int r;
@@ -504,10 +358,6 @@ int r100_copy_blit(struct radeon_device *rdev,
 	return r;
 }
 
-
-/*
- * CP
- */
 static int r100_cp_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
@@ -612,6 +462,7 @@ static int r100_cp_init_microcode(struct radeon_device *rdev)
 	}
 	return err;
 }
+
 static void r100_cp_load_microcode(struct radeon_device *rdev)
 {
 	const __be32 *fw_data;
@@ -863,13 +714,11 @@ int r100_cs_parse_packet0(struct radeon_cs_parser *p,
 void r100_cs_dump_packet(struct radeon_cs_parser *p,
 			 struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	volatile uint32_t *ib;
 	unsigned i;
 	unsigned idx;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx;
 	for (i = 0; i <= (pkt->count + 1); i++, idx++) {
 		DRM_INFO("ib[%d]=0x%08X\n", idx, ib[idx]);
@@ -896,7 +745,7 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p,
 			  idx, ib_chunk->length_dw);
 		return -EINVAL;
 	}
-	header = ib_chunk->kdata[idx];
+	header = radeon_get_ib_value(p, idx);
 	pkt->idx = idx;
 	pkt->type = CP_PACKET_GET_TYPE(header);
 	pkt->count = CP_PACKET_GET_COUNT(header);
@@ -939,7 +788,6 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p,
  */
 int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct drm_mode_object *obj;
 	struct drm_crtc *crtc;
 	struct radeon_crtc *radeon_crtc;
@@ -947,8 +795,9 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
 	int crtc_id;
 	int r;
 	uint32_t header, h_idx, reg;
+	volatile uint32_t *ib;
 
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	ib = p->ib->ptr;
 
 	/* parse the wait until */
 	r = r100_cs_packet_parse(p, &waitreloc, p->idx);
@@ -963,24 +812,24 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
 		return r;
 	}
 
-	if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) {
+	if (radeon_get_ib_value(p, waitreloc.idx + 1) != RADEON_WAIT_CRTC_VLINE) {
 		DRM_ERROR("vline wait had illegal wait until\n");
 		r = -EINVAL;
 		return r;
 	}
 
 	/* jump over the NOP */
-	r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+	r = r100_cs_packet_parse(p, &p3reloc, p->idx + waitreloc.count + 2);
 	if (r)
 		return r;
 
 	h_idx = p->idx - 2;
-	p->idx += waitreloc.count;
-	p->idx += p3reloc.count;
+	p->idx += waitreloc.count + 2;
+	p->idx += p3reloc.count + 2;
 
-	header = ib_chunk->kdata[h_idx];
-	crtc_id = ib_chunk->kdata[h_idx + 5];
-	reg = ib_chunk->kdata[h_idx] >> 2;
+	header = radeon_get_ib_value(p, h_idx);
+	crtc_id = radeon_get_ib_value(p, h_idx + 5);
+	reg = CP_PACKET0_GET_REG(header);
 	mutex_lock(&p->rdev->ddev->mode_config.mutex);
 	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
 	if (!obj) {
@@ -994,16 +843,16 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
 
 	if (!crtc->enabled) {
 		/* if the CRTC isn't enabled - we need to nop out the wait until */
-		ib_chunk->kdata[h_idx + 2] = PACKET2(0);
-		ib_chunk->kdata[h_idx + 3] = PACKET2(0);
+		ib[h_idx + 2] = PACKET2(0);
+		ib[h_idx + 3] = PACKET2(0);
 	} else if (crtc_id == 1) {
 		switch (reg) {
 		case AVIVO_D1MODE_VLINE_START_END:
-			header &= R300_CP_PACKET0_REG_MASK;
+			header &= ~R300_CP_PACKET0_REG_MASK;
 			header |= AVIVO_D2MODE_VLINE_START_END >> 2;
 			break;
 		case RADEON_CRTC_GUI_TRIG_VLINE:
-			header &= R300_CP_PACKET0_REG_MASK;
+			header &= ~R300_CP_PACKET0_REG_MASK;
 			header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2;
 			break;
 		default:
@@ -1011,8 +860,8 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
 			r = -EINVAL;
 			goto out;
 		}
-		ib_chunk->kdata[h_idx] = header;
-		ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
+		ib[h_idx] = header;
+		ib[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
 	}
 out:
 	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
@@ -1033,7 +882,6 @@ out:
 int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
 			      struct radeon_cs_reloc **cs_reloc)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_chunk *relocs_chunk;
 	struct radeon_cs_packet p3reloc;
 	unsigned idx;
@@ -1044,7 +892,6 @@ int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
 		return -EINVAL;
 	}
 	*cs_reloc = NULL;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
 	r = r100_cs_packet_parse(p, &p3reloc, p->idx);
 	if (r) {
@@ -1057,7 +904,7 @@ int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
 		r100_cs_dump_packet(p, &p3reloc);
 		return -EINVAL;
 	}
-	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
 	if (idx >= relocs_chunk->length_dw) {
 		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
 			  idx, relocs_chunk->length_dw);
@@ -1126,7 +973,6 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			      struct radeon_cs_packet *pkt,
 			      unsigned idx, unsigned reg)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
@@ -1134,11 +980,13 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 	int r;
 	int i, face;
 	u32 tile_flags = 0;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r100_cs_track *)p->track;
 
+	idx_value = radeon_get_ib_value(p, idx);
+
 	switch (reg) {
 	case RADEON_CRTC_GUI_TRIG_VLINE:
 		r = r100_cs_packet_parse_vline(p);
@@ -1166,8 +1014,8 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		track->zb.robj = reloc->robj;
-		track->zb.offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->zb.offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_RB3D_COLOROFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1178,8 +1026,8 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		track->cb[0].robj = reloc->robj;
-		track->cb[0].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->cb[0].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_PP_TXOFFSET_0:
 	case RADEON_PP_TXOFFSET_1:
@@ -1192,7 +1040,7 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].robj = reloc->robj;
 		break;
 	case RADEON_PP_CUBIC_OFFSET_T0_0:
@@ -1208,8 +1056,8 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[0].cube_info[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[0].cube_info[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[0].cube_info[i].robj = reloc->robj;
 		break;
 	case RADEON_PP_CUBIC_OFFSET_T1_0:
@@ -1225,8 +1073,8 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[1].cube_info[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[1].cube_info[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[1].cube_info[i].robj = reloc->robj;
 		break;
 	case RADEON_PP_CUBIC_OFFSET_T2_0:
@@ -1242,12 +1090,12 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[2].cube_info[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[2].cube_info[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[2].cube_info[i].robj = reloc->robj;
 		break;
 	case RADEON_RE_WIDTH_HEIGHT:
-		track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF);
+		track->maxy = ((idx_value >> 16) & 0x7FF);
 		break;
 	case RADEON_RB3D_COLORPITCH:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1263,17 +1111,17 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
-		track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK;
+		track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK;
 		break;
 	case RADEON_RB3D_DEPTHPITCH:
-		track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK;
+		track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK;
 		break;
 	case RADEON_RB3D_CNTL:
-		switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
+		switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
 		case 7:
 		case 8:
 		case 9:
@@ -1291,13 +1139,13 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			break;
 		default:
 			DRM_ERROR("Invalid color buffer format (%d) !\n",
-				  ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
+				  ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
 			return -EINVAL;
 		}
-		track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE);
+		track->z_enabled = !!(idx_value & RADEON_Z_ENABLE);
 		break;
 	case RADEON_RB3D_ZSTENCILCNTL:
-		switch (ib_chunk->kdata[idx] & 0xf) {
+		switch (idx_value & 0xf) {
 		case 0:
 			track->zb.cpp = 2;
 			break;
@@ -1321,44 +1169,44 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_PP_CNTL:
 		{
-			uint32_t temp = ib_chunk->kdata[idx] >> 4;
+			uint32_t temp = idx_value >> 4;
 			for (i = 0; i < track->num_texture; i++)
 				track->textures[i].enabled = !!(temp & (1 << i));
 		}
 		break;
 	case RADEON_SE_VF_CNTL:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = idx_value;
 		break;
 	case RADEON_SE_VTX_FMT:
-		track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx]);
+		track->vtx_size = r100_get_vtx_size(idx_value);
 		break;
 	case RADEON_PP_TEX_SIZE_0:
 	case RADEON_PP_TEX_SIZE_1:
 	case RADEON_PP_TEX_SIZE_2:
 		i = (reg - RADEON_PP_TEX_SIZE_0) / 8;
-		track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1;
-		track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
+		track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1;
+		track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
 		break;
 	case RADEON_PP_TEX_PITCH_0:
 	case RADEON_PP_TEX_PITCH_1:
 	case RADEON_PP_TEX_PITCH_2:
 		i = (reg - RADEON_PP_TEX_PITCH_0) / 8;
-		track->textures[i].pitch = ib_chunk->kdata[idx] + 32;
+		track->textures[i].pitch = idx_value + 32;
 		break;
 	case RADEON_PP_TXFILTER_0:
 	case RADEON_PP_TXFILTER_1:
 	case RADEON_PP_TXFILTER_2:
 		i = (reg - RADEON_PP_TXFILTER_0) / 24;
-		track->textures[i].num_levels = ((ib_chunk->kdata[idx] & RADEON_MAX_MIP_LEVEL_MASK)
+		track->textures[i].num_levels = ((idx_value & RADEON_MAX_MIP_LEVEL_MASK)
 						 >> RADEON_MAX_MIP_LEVEL_SHIFT);
-		tmp = (ib_chunk->kdata[idx] >> 23) & 0x7;
+		tmp = (idx_value >> 23) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_w = false;
-		tmp = (ib_chunk->kdata[idx] >> 27) & 0x7;
+		tmp = (idx_value >> 27) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_h = false;
 		break;
@@ -1366,16 +1214,16 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 	case RADEON_PP_TXFORMAT_1:
 	case RADEON_PP_TXFORMAT_2:
 		i = (reg - RADEON_PP_TXFORMAT_0) / 24;
-		if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_NON_POWER2) {
+		if (idx_value & RADEON_TXFORMAT_NON_POWER2) {
 			track->textures[i].use_pitch = 1;
 		} else {
 			track->textures[i].use_pitch = 0;
-			track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
-			track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
+			track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
+			track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
 		}
-		if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_CUBIC_MAP_ENABLE)
+		if (idx_value & RADEON_TXFORMAT_CUBIC_MAP_ENABLE)
 			track->textures[i].tex_coord_type = 2;
-		switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) {
+		switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) {
 		case RADEON_TXFORMAT_I8:
 		case RADEON_TXFORMAT_RGB332:
 		case RADEON_TXFORMAT_Y8:
@@ -1402,13 +1250,13 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			track->textures[i].cpp = 4;
 			break;
 		}
-		track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf);
-		track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf);
+		track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf);
+		track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf);
 		break;
 	case RADEON_PP_CUBIC_FACES_0:
 	case RADEON_PP_CUBIC_FACES_1:
 	case RADEON_PP_CUBIC_FACES_2:
-		tmp = ib_chunk->kdata[idx];
+		tmp = idx_value;
 		i = (reg - RADEON_PP_CUBIC_FACES_0) / 4;
 		for (face = 0; face < 4; face++) {
 			track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf);
@@ -1427,15 +1275,14 @@ int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
 					 struct radeon_cs_packet *pkt,
 					 struct radeon_object *robj)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	unsigned idx;
-
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	u32 value;
 	idx = pkt->idx + 1;
-	if ((ib_chunk->kdata[idx+2] + 1) > radeon_object_size(robj)) {
+	value = radeon_get_ib_value(p, idx + 2);
+	if ((value + 1) > radeon_object_size(robj)) {
 		DRM_ERROR("[drm] Buffer too small for PACKET3 INDX_BUFFER "
 			  "(need %u have %lu) !\n",
-			  ib_chunk->kdata[idx+2] + 1,
+			  value + 1,
 			  radeon_object_size(robj));
 		return -EINVAL;
 	}
@@ -1445,59 +1292,20 @@ int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
 static int r100_packet3_check(struct radeon_cs_parser *p,
 			      struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	unsigned idx;
-	unsigned i, c;
 	volatile uint32_t *ib;
 	int r;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
 	track = (struct r100_cs_track *)p->track;
 	switch (pkt->opcode) {
 	case PACKET3_3D_LOAD_VBPNTR:
-		c = ib_chunk->kdata[idx++];
-		track->num_arrays = c;
-		for (i = 0; i < (c - 1); i += 2, idx += 3) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 1].robj = reloc->robj;
-			track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24;
-			track->arrays[i + 1].esize &= 0x7F;
-		}
-		if (c & 1) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-		}
+		r = r100_packet3_load_vbpntr(p, pkt, idx);
+		if (r)
+			return r;
 		break;
 	case PACKET3_INDX_BUFFER:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1506,7 +1314,7 @@ static int r100_packet3_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx+1] = radeon_get_ib_value(p, idx+1) + ((u32)reloc->lobj.gpu_offset);
 		r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
 		if (r) {
 			return r;
@@ -1520,27 +1328,27 @@ static int r100_packet3_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = radeon_get_ib_value(p, idx) + ((u32)reloc->lobj.gpu_offset);
 		track->num_arrays = 1;
-		track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx+2]);
+		track->vtx_size = r100_get_vtx_size(radeon_get_ib_value(p, idx + 2));
 
 		track->arrays[0].robj = reloc->robj;
 		track->arrays[0].esize = track->vtx_size;
 
-		track->max_indx = ib_chunk->kdata[idx+1];
+		track->max_indx = radeon_get_ib_value(p, idx+1);
 
-		track->vap_vf_cntl = ib_chunk->kdata[idx+3];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx+3);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 	case PACKET3_3D_DRAW_IMMD:
-		if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx+1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
@@ -1548,11 +1356,11 @@ static int r100_packet3_check(struct radeon_cs_parser *p,
 		break;
 		/* triggers drawing using in-packet vertex data */
 	case PACKET3_3D_DRAW_IMMD_2:
-		if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		track->immd_dwords = pkt->count;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
@@ -1560,28 +1368,28 @@ static int r100_packet3_check(struct radeon_cs_parser *p,
 		break;
 		/* triggers drawing using in-packet vertex data */
 	case PACKET3_3D_DRAW_VBUF_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 		/* triggers drawing of vertex buffers setup elsewhere */
 	case PACKET3_3D_DRAW_INDX_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 		/* triggers drawing using indices to vertex buffer */
 	case PACKET3_3D_DRAW_VBUF:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 		/* triggers drawing of vertex buffers setup elsewhere */
 	case PACKET3_3D_DRAW_INDX:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
@@ -2033,7 +1841,7 @@ void r100_pll_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 	r100_pll_errata_after_data(rdev);
 }
 
-int r100_init(struct radeon_device *rdev)
+void r100_set_safe_registers(struct radeon_device *rdev)
 {
 	if (ASIC_IS_RN50(rdev)) {
 		rdev->config.r100.reg_safe_bm = rn50_reg_safe_bm;
@@ -2042,9 +1850,8 @@ int r100_init(struct radeon_device *rdev)
 		rdev->config.r100.reg_safe_bm = r100_reg_safe_bm;
 		rdev->config.r100.reg_safe_bm_size = ARRAY_SIZE(r100_reg_safe_bm);
 	} else {
-		return r200_init(rdev);
+		r200_set_safe_registers(rdev);
 	}
-	return 0;
 }
 
 /*
@@ -2342,9 +2149,11 @@ void r100_bandwidth_update(struct radeon_device *rdev)
 		mode1 = &rdev->mode_info.crtcs[0]->base.mode;
 		pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8;
 	}
-	if (rdev->mode_info.crtcs[1]->base.enabled) {
-		mode2 = &rdev->mode_info.crtcs[1]->base.mode;
-		pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8;
+	if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
+		if (rdev->mode_info.crtcs[1]->base.enabled) {
+			mode2 = &rdev->mode_info.crtcs[1]->base.mode;
+			pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8;
+		}
 	}
 
 	min_mem_eff.full = rfixed_const_8(0);
@@ -3157,7 +2966,7 @@ void r100_mc_stop(struct radeon_device *rdev, struct r100_mc_save *save)
 	WREG32(R_000740_CP_CSQ_CNTL, 0);
 
 	/* Save few CRTC registers */
-	save->GENMO_WT = RREG32(R_0003C0_GENMO_WT);
+	save->GENMO_WT = RREG8(R_0003C2_GENMO_WT);
 	save->CRTC_EXT_CNTL = RREG32(R_000054_CRTC_EXT_CNTL);
 	save->CRTC_GEN_CNTL = RREG32(R_000050_CRTC_GEN_CNTL);
 	save->CUR_OFFSET = RREG32(R_000260_CUR_OFFSET);
@@ -3167,7 +2976,7 @@ void r100_mc_stop(struct radeon_device *rdev, struct r100_mc_save *save)
 	}
 
 	/* Disable VGA aperture access */
-	WREG32(R_0003C0_GENMO_WT, C_0003C0_VGA_RAM_EN & save->GENMO_WT);
+	WREG8(R_0003C2_GENMO_WT, C_0003C2_VGA_RAM_EN & save->GENMO_WT);
 	/* Disable cursor, overlay, crtc */
 	WREG32(R_000260_CUR_OFFSET, save->CUR_OFFSET | S_000260_CUR_LOCK(1));
 	WREG32(R_000054_CRTC_EXT_CNTL, save->CRTC_EXT_CNTL |
@@ -3199,10 +3008,264 @@ void r100_mc_resume(struct radeon_device *rdev, struct r100_mc_save *save)
 				rdev->mc.vram_location);
 	}
 	/* Restore CRTC registers */
-	WREG32(R_0003C0_GENMO_WT, save->GENMO_WT);
+	WREG8(R_0003C2_GENMO_WT, save->GENMO_WT);
 	WREG32(R_000054_CRTC_EXT_CNTL, save->CRTC_EXT_CNTL);
 	WREG32(R_000050_CRTC_GEN_CNTL, save->CRTC_GEN_CNTL);
 	if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
 		WREG32(R_0003F8_CRTC2_GEN_CNTL, save->CRTC2_GEN_CNTL);
 	}
 }
+
+void r100_vga_render_disable(struct radeon_device *rdev)
+{
+	u32 tmp;
+
+	tmp = RREG8(R_0003C2_GENMO_WT);
+	WREG8(R_0003C2_GENMO_WT, C_0003C2_VGA_RAM_EN & tmp);
+}
+
+static void r100_debugfs(struct radeon_device *rdev)
+{
+	int r;
+
+	r = r100_debugfs_mc_info_init(rdev);
+	if (r)
+		dev_warn(rdev->dev, "Failed to create r100_mc debugfs file.\n");
+}
+
+static void r100_mc_program(struct radeon_device *rdev)
+{
+	struct r100_mc_save save;
+
+	/* Stops all mc clients */
+	r100_mc_stop(rdev, &save);
+	if (rdev->flags & RADEON_IS_AGP) {
+		WREG32(R_00014C_MC_AGP_LOCATION,
+			S_00014C_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+			S_00014C_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+		WREG32(R_000170_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+		if (rdev->family > CHIP_RV200)
+			WREG32(R_00015C_AGP_BASE_2,
+				upper_32_bits(rdev->mc.agp_base) & 0xff);
+	} else {
+		WREG32(R_00014C_MC_AGP_LOCATION, 0x0FFFFFFF);
+		WREG32(R_000170_AGP_BASE, 0);
+		if (rdev->family > CHIP_RV200)
+			WREG32(R_00015C_AGP_BASE_2, 0);
+	}
+	/* Wait for mc idle */
+	if (r100_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait for MC idle timeout.\n");
+	/* Program MC, should be a 32bits limited address space */
+	WREG32(R_000148_MC_FB_LOCATION,
+		S_000148_MC_FB_START(rdev->mc.vram_start >> 16) |
+		S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16));
+	r100_mc_resume(rdev, &save);
+}
+
+void r100_clock_startup(struct radeon_device *rdev)
+{
+	u32 tmp;
+
+	if (radeon_dynclks != -1 && radeon_dynclks)
+		radeon_legacy_set_clock_gating(rdev, 1);
+	/* We need to force on some of the block */
+	tmp = RREG32_PLL(R_00000D_SCLK_CNTL);
+	tmp |= S_00000D_FORCE_CP(1) | S_00000D_FORCE_VIP(1);
+	if ((rdev->family == CHIP_RV250) || (rdev->family == CHIP_RV280))
+		tmp |= S_00000D_FORCE_DISP1(1) | S_00000D_FORCE_DISP2(1);
+	WREG32_PLL(R_00000D_SCLK_CNTL, tmp);
+}
+
+static int r100_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	r100_mc_program(rdev);
+	/* Resume clock */
+	r100_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	r100_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	if (rdev->flags & RADEON_IS_PCI) {
+		r = r100_pci_gart_enable(rdev);
+		if (r)
+			return r;
+	}
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	r100_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int r100_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	if (rdev->flags & RADEON_IS_PCI)
+		r100_pci_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	r100_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	radeon_combios_asic_init(rdev->ddev);
+	/* Resume clock after posting */
+	r100_clock_startup(rdev);
+	return r100_startup(rdev);
+}
+
+int r100_suspend(struct radeon_device *rdev)
+{
+	r100_cp_disable(rdev);
+	r100_wb_disable(rdev);
+	r100_irq_disable(rdev);
+	if (rdev->flags & RADEON_IS_PCI)
+		r100_pci_gart_disable(rdev);
+	return 0;
+}
+
+void r100_fini(struct radeon_device *rdev)
+{
+	r100_suspend(rdev);
+	r100_cp_fini(rdev);
+	r100_wb_fini(rdev);
+	r100_ib_fini(rdev);
+	radeon_gem_fini(rdev);
+	if (rdev->flags & RADEON_IS_PCI)
+		r100_pci_gart_fini(rdev);
+	radeon_irq_kms_fini(rdev);
+	radeon_fence_driver_fini(rdev);
+	radeon_object_fini(rdev);
+	radeon_atombios_fini(rdev);
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+}
+
+int r100_mc_init(struct radeon_device *rdev)
+{
+	int r;
+	u32 tmp;
+
+	/* Setup GPU memory space */
+	rdev->mc.vram_location = 0xFFFFFFFFUL;
+	rdev->mc.gtt_location = 0xFFFFFFFFUL;
+	if (rdev->flags & RADEON_IS_IGP) {
+		tmp = G_00015C_MC_FB_START(RREG32(R_00015C_NB_TOM));
+		rdev->mc.vram_location = tmp << 16;
+	}
+	if (rdev->flags & RADEON_IS_AGP) {
+		r = radeon_agp_init(rdev);
+		if (r) {
+			printk(KERN_WARNING "[drm] Disabling AGP\n");
+			rdev->flags &= ~RADEON_IS_AGP;
+			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+		} else {
+			rdev->mc.gtt_location = rdev->mc.agp_base;
+		}
+	}
+	r = radeon_mc_setup(rdev);
+	if (r)
+		return r;
+	return 0;
+}
+
+int r100_init(struct radeon_device *rdev)
+{
+	int r;
+
+	/* Register debugfs file specific to this group of asics */
+	r100_debugfs(rdev);
+	/* Disable VGA */
+	r100_vga_render_disable(rdev);
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		dev_err(rdev->dev, "Expecting combios for RS400/RS480 GPU\n");
+		return -EINVAL;
+	} else {
+		r = radeon_combios_init(rdev);
+		if (r)
+			return r;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		radeon_combios_asic_init(rdev->ddev);
+	}
+	/* Set asic errata */
+	r100_errata(rdev);
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	r100_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r100_mc_init(rdev);
+	if (r)
+		return r;
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	if (rdev->flags & RADEON_IS_PCI) {
+		r = r100_pci_gart_init(rdev);
+		if (r)
+			return r;
+	}
+	r100_set_safe_registers(rdev);
+	rdev->accel_working = true;
+	r = r100_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		r100_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		if (rdev->flags & RADEON_IS_PCI)
+			r100_pci_gart_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
+	return 0;
+}
diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h
index 70a82eda394a..0daf0d76a891 100644
--- a/drivers/gpu/drm/radeon/r100_track.h
+++ b/drivers/gpu/drm/radeon/r100_track.h
@@ -84,6 +84,8 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 		       struct radeon_cs_packet *pkt,
 		       unsigned idx, unsigned reg);
 
+
+
 static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
 					  struct radeon_cs_packet *pkt,
 					  unsigned idx,
@@ -93,9 +95,7 @@ static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
 	u32 tile_flags = 0;
 	u32 tmp;
 	struct radeon_cs_reloc *reloc;
-	struct radeon_cs_chunk *ib_chunk;
-
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	u32 value;
 
 	r = r100_cs_packet_next_reloc(p, &reloc);
 	if (r) {
@@ -104,7 +104,8 @@ static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
 		r100_cs_dump_packet(p, pkt);
 		return r;
 	}
-	tmp = ib_chunk->kdata[idx] & 0x003fffff;
+	value = radeon_get_ib_value(p, idx);
+	tmp = value & 0x003fffff;
 	tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
 
 	if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
@@ -119,6 +120,64 @@ static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
 	}
 
 	tmp |= tile_flags;
-	p->ib->ptr[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
+	p->ib->ptr[idx] = (value & 0x3fc00000) | tmp;
 	return 0;
 }
+
+static inline int r100_packet3_load_vbpntr(struct radeon_cs_parser *p,
+					   struct radeon_cs_packet *pkt,
+					   int idx)
+{
+	unsigned c, i;
+	struct radeon_cs_reloc *reloc;
+	struct r100_cs_track *track;
+	int r = 0;
+	volatile uint32_t *ib;
+	u32 idx_value;
+
+	ib = p->ib->ptr;
+	track = (struct r100_cs_track *)p->track;
+	c = radeon_get_ib_value(p, idx++) & 0x1F;
+	track->num_arrays = c;
+	for (i = 0; i < (c - 1); i+=2, idx+=3) {
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n",
+				  pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		idx_value = radeon_get_ib_value(p, idx);
+		ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+
+		track->arrays[i + 0].esize = idx_value >> 8;
+		track->arrays[i + 0].robj = reloc->robj;
+		track->arrays[i + 0].esize &= 0x7F;
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n",
+				  pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		ib[idx+2] = radeon_get_ib_value(p, idx + 2) + ((u32)reloc->lobj.gpu_offset);
+		track->arrays[i + 1].robj = reloc->robj;
+		track->arrays[i + 1].esize = idx_value >> 24;
+		track->arrays[i + 1].esize &= 0x7F;
+	}
+	if (c & 1) {
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n",
+					  pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		idx_value = radeon_get_ib_value(p, idx);
+		ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+		track->arrays[i + 0].robj = reloc->robj;
+		track->arrays[i + 0].esize = idx_value >> 8;
+		track->arrays[i + 0].esize &= 0x7F;
+	}
+	return r;
+}
diff --git a/drivers/gpu/drm/radeon/r100d.h b/drivers/gpu/drm/radeon/r100d.h
index c4b257ec920e..df29a630c466 100644
--- a/drivers/gpu/drm/radeon/r100d.h
+++ b/drivers/gpu/drm/radeon/r100d.h
@@ -381,6 +381,24 @@
 #define   S_000054_VCRTC_IDX_MASTER(x)                 (((x) & 0x7F) << 24)
 #define   G_000054_VCRTC_IDX_MASTER(x)                 (((x) >> 24) & 0x7F)
 #define   C_000054_VCRTC_IDX_MASTER                    0x80FFFFFF
+#define R_000148_MC_FB_LOCATION                      0x000148
+#define   S_000148_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000148_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000148_MC_FB_START                         0xFFFF0000
+#define   S_000148_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000148_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000148_MC_FB_TOP                           0x0000FFFF
+#define R_00014C_MC_AGP_LOCATION                     0x00014C
+#define   S_00014C_MC_AGP_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_00014C_MC_AGP_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_00014C_MC_AGP_START                        0xFFFF0000
+#define   S_00014C_MC_AGP_TOP(x)                       (((x) & 0xFFFF) << 16)
+#define   G_00014C_MC_AGP_TOP(x)                       (((x) >> 16) & 0xFFFF)
+#define   C_00014C_MC_AGP_TOP                          0x0000FFFF
+#define R_000170_AGP_BASE                            0x000170
+#define   S_000170_AGP_BASE_ADDR(x)                    (((x) & 0xFFFFFFFF) << 0)
+#define   G_000170_AGP_BASE_ADDR(x)                    (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000170_AGP_BASE_ADDR                       0x00000000
 #define R_00023C_DISPLAY_BASE_ADDR                   0x00023C
 #define   S_00023C_DISPLAY_BASE_ADDR(x)                (((x) & 0xFFFFFFFF) << 0)
 #define   G_00023C_DISPLAY_BASE_ADDR(x)                (((x) >> 0) & 0xFFFFFFFF)
@@ -403,25 +421,25 @@
 #define   S_000360_CUR2_LOCK(x)                        (((x) & 0x1) << 31)
 #define   G_000360_CUR2_LOCK(x)                        (((x) >> 31) & 0x1)
 #define   C_000360_CUR2_LOCK                           0x7FFFFFFF
-#define R_0003C0_GENMO_WT                            0x0003C0
-#define   S_0003C0_GENMO_MONO_ADDRESS_B(x)             (((x) & 0x1) << 0)
-#define   G_0003C0_GENMO_MONO_ADDRESS_B(x)             (((x) >> 0) & 0x1)
-#define   C_0003C0_GENMO_MONO_ADDRESS_B                0xFFFFFFFE
-#define   S_0003C0_VGA_RAM_EN(x)                       (((x) & 0x1) << 1)
-#define   G_0003C0_VGA_RAM_EN(x)                       (((x) >> 1) & 0x1)
-#define   C_0003C0_VGA_RAM_EN                          0xFFFFFFFD
-#define   S_0003C0_VGA_CKSEL(x)                        (((x) & 0x3) << 2)
-#define   G_0003C0_VGA_CKSEL(x)                        (((x) >> 2) & 0x3)
-#define   C_0003C0_VGA_CKSEL                           0xFFFFFFF3
-#define   S_0003C0_ODD_EVEN_MD_PGSEL(x)                (((x) & 0x1) << 5)
-#define   G_0003C0_ODD_EVEN_MD_PGSEL(x)                (((x) >> 5) & 0x1)
-#define   C_0003C0_ODD_EVEN_MD_PGSEL                   0xFFFFFFDF
-#define   S_0003C0_VGA_HSYNC_POL(x)                    (((x) & 0x1) << 6)
-#define   G_0003C0_VGA_HSYNC_POL(x)                    (((x) >> 6) & 0x1)
-#define   C_0003C0_VGA_HSYNC_POL                       0xFFFFFFBF
-#define   S_0003C0_VGA_VSYNC_POL(x)                    (((x) & 0x1) << 7)
-#define   G_0003C0_VGA_VSYNC_POL(x)                    (((x) >> 7) & 0x1)
-#define   C_0003C0_VGA_VSYNC_POL                       0xFFFFFF7F
+#define R_0003C2_GENMO_WT                            0x0003C0
+#define   S_0003C2_GENMO_MONO_ADDRESS_B(x)             (((x) & 0x1) << 0)
+#define   G_0003C2_GENMO_MONO_ADDRESS_B(x)             (((x) >> 0) & 0x1)
+#define   C_0003C2_GENMO_MONO_ADDRESS_B                0xFE
+#define   S_0003C2_VGA_RAM_EN(x)                       (((x) & 0x1) << 1)
+#define   G_0003C2_VGA_RAM_EN(x)                       (((x) >> 1) & 0x1)
+#define   C_0003C2_VGA_RAM_EN                          0xFD
+#define   S_0003C2_VGA_CKSEL(x)                        (((x) & 0x3) << 2)
+#define   G_0003C2_VGA_CKSEL(x)                        (((x) >> 2) & 0x3)
+#define   C_0003C2_VGA_CKSEL                           0xF3
+#define   S_0003C2_ODD_EVEN_MD_PGSEL(x)                (((x) & 0x1) << 5)
+#define   G_0003C2_ODD_EVEN_MD_PGSEL(x)                (((x) >> 5) & 0x1)
+#define   C_0003C2_ODD_EVEN_MD_PGSEL                   0xDF
+#define   S_0003C2_VGA_HSYNC_POL(x)                    (((x) & 0x1) << 6)
+#define   G_0003C2_VGA_HSYNC_POL(x)                    (((x) >> 6) & 0x1)
+#define   C_0003C2_VGA_HSYNC_POL                       0xBF
+#define   S_0003C2_VGA_VSYNC_POL(x)                    (((x) & 0x1) << 7)
+#define   G_0003C2_VGA_VSYNC_POL(x)                    (((x) >> 7) & 0x1)
+#define   C_0003C2_VGA_VSYNC_POL                       0x7F
 #define R_0003F8_CRTC2_GEN_CNTL                      0x0003F8
 #define   S_0003F8_CRTC2_DBL_SCAN_EN(x)                (((x) & 0x1) << 0)
 #define   G_0003F8_CRTC2_DBL_SCAN_EN(x)                (((x) >> 0) & 0x1)
@@ -545,6 +563,46 @@
 #define   S_000774_SCRATCH_ADDR(x)                     (((x) & 0x7FFFFFF) << 5)
 #define   G_000774_SCRATCH_ADDR(x)                     (((x) >> 5) & 0x7FFFFFF)
 #define   C_000774_SCRATCH_ADDR                        0x0000001F
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
 #define R_000E40_RBBM_STATUS                         0x000E40
 #define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
 #define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
@@ -604,4 +662,53 @@
 #define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
 #define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
 
+
+#define R_00000D_SCLK_CNTL                           0x00000D
+#define   S_00000D_SCLK_SRC_SEL(x)                     (((x) & 0x7) << 0)
+#define   G_00000D_SCLK_SRC_SEL(x)                     (((x) >> 0) & 0x7)
+#define   C_00000D_SCLK_SRC_SEL                        0xFFFFFFF8
+#define   S_00000D_TCLK_SRC_SEL(x)                     (((x) & 0x7) << 8)
+#define   G_00000D_TCLK_SRC_SEL(x)                     (((x) >> 8) & 0x7)
+#define   C_00000D_TCLK_SRC_SEL                        0xFFFFF8FF
+#define   S_00000D_FORCE_CP(x)                         (((x) & 0x1) << 16)
+#define   G_00000D_FORCE_CP(x)                         (((x) >> 16) & 0x1)
+#define   C_00000D_FORCE_CP                            0xFFFEFFFF
+#define   S_00000D_FORCE_HDP(x)                        (((x) & 0x1) << 17)
+#define   G_00000D_FORCE_HDP(x)                        (((x) >> 17) & 0x1)
+#define   C_00000D_FORCE_HDP                           0xFFFDFFFF
+#define   S_00000D_FORCE_DISP(x)                       (((x) & 0x1) << 18)
+#define   G_00000D_FORCE_DISP(x)                       (((x) >> 18) & 0x1)
+#define   C_00000D_FORCE_DISP                          0xFFFBFFFF
+#define   S_00000D_FORCE_TOP(x)                        (((x) & 0x1) << 19)
+#define   G_00000D_FORCE_TOP(x)                        (((x) >> 19) & 0x1)
+#define   C_00000D_FORCE_TOP                           0xFFF7FFFF
+#define   S_00000D_FORCE_E2(x)                         (((x) & 0x1) << 20)
+#define   G_00000D_FORCE_E2(x)                         (((x) >> 20) & 0x1)
+#define   C_00000D_FORCE_E2                            0xFFEFFFFF
+#define   S_00000D_FORCE_SE(x)                         (((x) & 0x1) << 21)
+#define   G_00000D_FORCE_SE(x)                         (((x) >> 21) & 0x1)
+#define   C_00000D_FORCE_SE                            0xFFDFFFFF
+#define   S_00000D_FORCE_IDCT(x)                       (((x) & 0x1) << 22)
+#define   G_00000D_FORCE_IDCT(x)                       (((x) >> 22) & 0x1)
+#define   C_00000D_FORCE_IDCT                          0xFFBFFFFF
+#define   S_00000D_FORCE_VIP(x)                        (((x) & 0x1) << 23)
+#define   G_00000D_FORCE_VIP(x)                        (((x) >> 23) & 0x1)
+#define   C_00000D_FORCE_VIP                           0xFF7FFFFF
+#define   S_00000D_FORCE_RE(x)                         (((x) & 0x1) << 24)
+#define   G_00000D_FORCE_RE(x)                         (((x) >> 24) & 0x1)
+#define   C_00000D_FORCE_RE                            0xFEFFFFFF
+#define   S_00000D_FORCE_PB(x)                         (((x) & 0x1) << 25)
+#define   G_00000D_FORCE_PB(x)                         (((x) >> 25) & 0x1)
+#define   C_00000D_FORCE_PB                            0xFDFFFFFF
+#define   S_00000D_FORCE_TAM(x)                        (((x) & 0x1) << 26)
+#define   G_00000D_FORCE_TAM(x)                        (((x) >> 26) & 0x1)
+#define   C_00000D_FORCE_TAM                           0xFBFFFFFF
+#define   S_00000D_FORCE_TDM(x)                        (((x) & 0x1) << 27)
+#define   G_00000D_FORCE_TDM(x)                        (((x) >> 27) & 0x1)
+#define   C_00000D_FORCE_TDM                           0xF7FFFFFF
+#define   S_00000D_FORCE_RB(x)                         (((x) & 0x1) << 28)
+#define   G_00000D_FORCE_RB(x)                         (((x) >> 28) & 0x1)
+#define   C_00000D_FORCE_RB                            0xEFFFFFFF
+
+
 #endif
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index 568c74bfba3d..eb740fc3549f 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -96,7 +96,6 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 		       struct radeon_cs_packet *pkt,
 		       unsigned idx, unsigned reg)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
@@ -105,11 +104,11 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 	int i;
 	int face;
 	u32 tile_flags = 0;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r100_cs_track *)p->track;
-
+	idx_value = radeon_get_ib_value(p, idx);
 	switch (reg) {
 	case RADEON_CRTC_GUI_TRIG_VLINE:
 		r = r100_cs_packet_parse_vline(p);
@@ -137,8 +136,8 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		track->zb.robj = reloc->robj;
-		track->zb.offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->zb.offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_RB3D_COLOROFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -149,8 +148,8 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		track->cb[0].robj = reloc->robj;
-		track->cb[0].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->cb[0].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case R200_PP_TXOFFSET_0:
 	case R200_PP_TXOFFSET_1:
@@ -166,7 +165,7 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].robj = reloc->robj;
 		break;
 	case R200_PP_CUBIC_OFFSET_F1_0:
@@ -208,12 +207,12 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[i].cube_info[face - 1].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[i].cube_info[face - 1].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].cube_info[face - 1].robj = reloc->robj;
 		break;
 	case RADEON_RE_WIDTH_HEIGHT:
-		track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF);
+		track->maxy = ((idx_value >> 16) & 0x7FF);
 		break;
 	case RADEON_RB3D_COLORPITCH:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -229,17 +228,17 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
-		track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK;
+		track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK;
 		break;
 	case RADEON_RB3D_DEPTHPITCH:
-		track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK;
+		track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK;
 		break;
 	case RADEON_RB3D_CNTL:
-		switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
+		switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
 		case 7:
 		case 8:
 		case 9:
@@ -257,18 +256,18 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 			break;
 		default:
 			DRM_ERROR("Invalid color buffer format (%d) !\n",
-				  ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
+				  ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
 			return -EINVAL;
 		}
-		if (ib_chunk->kdata[idx] & RADEON_DEPTHXY_OFFSET_ENABLE) {
+		if (idx_value & RADEON_DEPTHXY_OFFSET_ENABLE) {
 			DRM_ERROR("No support for depth xy offset in kms\n");
 			return -EINVAL;
 		}
 
-		track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE);
+		track->z_enabled = !!(idx_value & RADEON_Z_ENABLE);
 		break;
 	case RADEON_RB3D_ZSTENCILCNTL:
-		switch (ib_chunk->kdata[idx] & 0xf) {
+		switch (idx_value & 0xf) {
 		case 0:
 			track->zb.cpp = 2;
 			break;
@@ -292,27 +291,27 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_PP_CNTL:
 		{
-			uint32_t temp = ib_chunk->kdata[idx] >> 4;
+			uint32_t temp = idx_value >> 4;
 			for (i = 0; i < track->num_texture; i++)
 				track->textures[i].enabled = !!(temp & (1 << i));
 		}
 		break;
 	case RADEON_SE_VF_CNTL:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = idx_value;
 		break;
 	case 0x210c:
 		/* VAP_VF_MAX_VTX_INDX */
-		track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL;
+		track->max_indx = idx_value & 0x00FFFFFFUL;
 		break;
 	case R200_SE_VTX_FMT_0:
-		track->vtx_size = r200_get_vtx_size_0(ib_chunk->kdata[idx]);
+		track->vtx_size = r200_get_vtx_size_0(idx_value);
 		break;
 	case R200_SE_VTX_FMT_1:
-		track->vtx_size += r200_get_vtx_size_1(ib_chunk->kdata[idx]);
+		track->vtx_size += r200_get_vtx_size_1(idx_value);
 		break;
 	case R200_PP_TXSIZE_0:
 	case R200_PP_TXSIZE_1:
@@ -321,8 +320,8 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 	case R200_PP_TXSIZE_4:
 	case R200_PP_TXSIZE_5:
 		i = (reg - R200_PP_TXSIZE_0) / 32;
-		track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1;
-		track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
+		track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1;
+		track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
 		break;
 	case R200_PP_TXPITCH_0:
 	case R200_PP_TXPITCH_1:
@@ -331,7 +330,7 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 	case R200_PP_TXPITCH_4:
 	case R200_PP_TXPITCH_5:
 		i = (reg - R200_PP_TXPITCH_0) / 32;
-		track->textures[i].pitch = ib_chunk->kdata[idx] + 32;
+		track->textures[i].pitch = idx_value + 32;
 		break;
 	case R200_PP_TXFILTER_0:
 	case R200_PP_TXFILTER_1:
@@ -340,12 +339,12 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 	case R200_PP_TXFILTER_4:
 	case R200_PP_TXFILTER_5:
 		i = (reg - R200_PP_TXFILTER_0) / 32;
-		track->textures[i].num_levels = ((ib_chunk->kdata[idx] & R200_MAX_MIP_LEVEL_MASK)
+		track->textures[i].num_levels = ((idx_value & R200_MAX_MIP_LEVEL_MASK)
 						 >> R200_MAX_MIP_LEVEL_SHIFT);
-		tmp = (ib_chunk->kdata[idx] >> 23) & 0x7;
+		tmp = (idx_value >> 23) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_w = false;
-		tmp = (ib_chunk->kdata[idx] >> 27) & 0x7;
+		tmp = (idx_value >> 27) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_h = false;
 		break;
@@ -364,8 +363,8 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 	case R200_PP_TXFORMAT_X_4:
 	case R200_PP_TXFORMAT_X_5:
 		i = (reg - R200_PP_TXFORMAT_X_0) / 32;
-		track->textures[i].txdepth = ib_chunk->kdata[idx] & 0x7;
-		tmp = (ib_chunk->kdata[idx] >> 16) & 0x3;
+		track->textures[i].txdepth = idx_value & 0x7;
+		tmp = (idx_value >> 16) & 0x3;
 		/* 2D, 3D, CUBE */
 		switch (tmp) {
 		case 0:
@@ -389,14 +388,14 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 	case R200_PP_TXFORMAT_4:
 	case R200_PP_TXFORMAT_5:
 		i = (reg - R200_PP_TXFORMAT_0) / 32;
-		if (ib_chunk->kdata[idx] & R200_TXFORMAT_NON_POWER2) {
+		if (idx_value & R200_TXFORMAT_NON_POWER2) {
 			track->textures[i].use_pitch = 1;
 		} else {
 			track->textures[i].use_pitch = 0;
-			track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
-			track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
+			track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
+			track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
 		}
-		switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) {
+		switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) {
 		case R200_TXFORMAT_I8:
 		case R200_TXFORMAT_RGB332:
 		case R200_TXFORMAT_Y8:
@@ -424,8 +423,8 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 			track->textures[i].cpp = 4;
 			break;
 		}
-		track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf);
-		track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf);
+		track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf);
+		track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf);
 		break;
 	case R200_PP_CUBIC_FACES_0:
 	case R200_PP_CUBIC_FACES_1:
@@ -433,7 +432,7 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 	case R200_PP_CUBIC_FACES_3:
 	case R200_PP_CUBIC_FACES_4:
 	case R200_PP_CUBIC_FACES_5:
-		tmp = ib_chunk->kdata[idx];
+		tmp = idx_value;
 		i = (reg - R200_PP_CUBIC_FACES_0) / 32;
 		for (face = 0; face < 4; face++) {
 			track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf);
@@ -448,9 +447,8 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 	return 0;
 }
 
-int r200_init(struct radeon_device *rdev)
+void r200_set_safe_registers(struct radeon_device *rdev)
 {
 	rdev->config.r100.reg_safe_bm = r200_reg_safe_bm;
 	rdev->config.r100.reg_safe_bm_size = ARRAY_SIZE(r200_reg_safe_bm);
-	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index bb151ecdf8fc..e08c4a8974ca 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -33,43 +33,16 @@
 #include "radeon_drm.h"
 #include "r100_track.h"
 #include "r300d.h"
-
+#include "rv350d.h"
 #include "r300_reg_safe.h"
 
-/* r300,r350,rv350,rv370,rv380 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r100_cp_reset(struct radeon_device *rdev);
-int r100_rb2d_reset(struct radeon_device *rdev);
-int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
-int r100_pci_gart_enable(struct radeon_device *rdev);
-void r100_mc_setup(struct radeon_device *rdev);
-void r100_mc_disable_clients(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r100_cs_packet_parse(struct radeon_cs_parser *p,
-			 struct radeon_cs_packet *pkt,
-			 unsigned idx);
-int r100_cs_packet_parse_vline(struct radeon_cs_parser *p);
-int r100_cs_parse_packet0(struct radeon_cs_parser *p,
-			  struct radeon_cs_packet *pkt,
-			  const unsigned *auth, unsigned n,
-			  radeon_packet0_check_t check);
-int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
-					 struct radeon_cs_packet *pkt,
-					 struct radeon_object *robj);
-
-/* This files gather functions specifics to:
- * r300,r350,rv350,rv370,rv380
- *
- * Some of these functions might be used by newer ASICs.
- */
-void r300_gpu_init(struct radeon_device *rdev);
-int r300_mc_wait_for_idle(struct radeon_device *rdev);
-int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
-
+/* This files gather functions specifics to: r300,r350,rv350,rv370,rv380 */
 
 /*
  * rv370,rv380 PCIE GART
  */
+static int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
+
 void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev)
 {
 	uint32_t tmp;
@@ -182,59 +155,6 @@ void rv370_pcie_gart_fini(struct radeon_device *rdev)
 	radeon_gart_fini(rdev);
 }
 
-/*
- * MC
- */
-int r300_mc_init(struct radeon_device *rdev)
-{
-	int r;
-
-	if (r100_debugfs_rbbm_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
-	}
-
-	r300_gpu_init(rdev);
-	r100_pci_gart_disable(rdev);
-	if (rdev->flags & RADEON_IS_PCIE) {
-		rv370_pcie_gart_disable(rdev);
-	}
-
-	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
-	rdev->mc.gtt_location = 0xFFFFFFFFUL;
-	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
-		} else {
-			rdev->mc.gtt_location = rdev->mc.agp_base;
-		}
-	}
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	/* Program GPU memory space */
-	r100_mc_disable_clients(rdev);
-	if (r300_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-	r100_mc_setup(rdev);
-	return 0;
-}
-
-void r300_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Fence emission
- */
 void r300_fence_ring_emit(struct radeon_device *rdev,
 			  struct radeon_fence *fence)
 {
@@ -260,10 +180,6 @@ void r300_fence_ring_emit(struct radeon_device *rdev,
 	radeon_ring_write(rdev, RADEON_SW_INT_FIRE);
 }
 
-
-/*
- * Global GPU functions
- */
 int r300_copy_dma(struct radeon_device *rdev,
 		  uint64_t src_offset,
 		  uint64_t dst_offset,
@@ -582,11 +498,6 @@ void r300_vram_info(struct radeon_device *rdev)
 	r100_vram_init_sizes(rdev);
 }
 
-
-/*
- * PCIE Lanes
- */
-
 void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes)
 {
 	uint32_t link_width_cntl, mask;
@@ -646,10 +557,6 @@ void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes)
 
 }
 
-
-/*
- * Debugfs info
- */
 #if defined(CONFIG_DEBUG_FS)
 static int rv370_debugfs_pcie_gart_info(struct seq_file *m, void *data)
 {
@@ -680,7 +587,7 @@ static struct drm_info_list rv370_pcie_gart_info_list[] = {
 };
 #endif
 
-int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
+static int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
 {
 #if defined(CONFIG_DEBUG_FS)
 	return radeon_debugfs_add_files(rdev, rv370_pcie_gart_info_list, 1);
@@ -689,25 +596,22 @@ int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
 #endif
 }
 
-
-/*
- * CS functions
- */
 static int r300_packet0_check(struct radeon_cs_parser *p,
 		struct radeon_cs_packet *pkt,
 		unsigned idx, unsigned reg)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
 	uint32_t tmp, tile_flags = 0;
 	unsigned i;
 	int r;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r100_cs_track *)p->track;
+	idx_value = radeon_get_ib_value(p, idx);
+
 	switch(reg) {
 	case AVIVO_D1MODE_VLINE_START_END:
 	case RADEON_CRTC_GUI_TRIG_VLINE:
@@ -738,8 +642,8 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		track->cb[i].robj = reloc->robj;
-		track->cb[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->cb[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case R300_ZB_DEPTHOFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -750,8 +654,8 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		track->zb.robj = reloc->robj;
-		track->zb.offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->zb.offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case R300_TX_OFFSET_0:
 	case R300_TX_OFFSET_0+4:
@@ -777,32 +681,32 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].robj = reloc->robj;
 		break;
 	/* Tracked registers */
 	case 0x2084:
 		/* VAP_VF_CNTL */
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = idx_value;
 		break;
 	case 0x20B4:
 		/* VAP_VTX_SIZE */
-		track->vtx_size = ib_chunk->kdata[idx] & 0x7F;
+		track->vtx_size = idx_value & 0x7F;
 		break;
 	case 0x2134:
 		/* VAP_VF_MAX_VTX_INDX */
-		track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL;
+		track->max_indx = idx_value & 0x00FFFFFFUL;
 		break;
 	case 0x43E4:
 		/* SC_SCISSOR1 */
-		track->maxy = ((ib_chunk->kdata[idx] >> 13) & 0x1FFF) + 1;
+		track->maxy = ((idx_value >> 13) & 0x1FFF) + 1;
 		if (p->rdev->family < CHIP_RV515) {
 			track->maxy -= 1440;
 		}
 		break;
 	case 0x4E00:
 		/* RB3D_CCTL */
-		track->num_cb = ((ib_chunk->kdata[idx] >> 5) & 0x3) + 1;
+		track->num_cb = ((idx_value >> 5) & 0x3) + 1;
 		break;
 	case 0x4E38:
 	case 0x4E3C:
@@ -825,13 +729,13 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= R300_COLOR_MICROTILE_ENABLE;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
 		i = (reg - 0x4E38) >> 2;
-		track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
-		switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
+		track->cb[i].pitch = idx_value & 0x3FFE;
+		switch (((idx_value >> 21) & 0xF)) {
 		case 9:
 		case 11:
 		case 12:
@@ -854,13 +758,13 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 			break;
 		default:
 			DRM_ERROR("Invalid color buffer format (%d) !\n",
-				  ((ib_chunk->kdata[idx] >> 21) & 0xF));
+				  ((idx_value >> 21) & 0xF));
 			return -EINVAL;
 		}
 		break;
 	case 0x4F00:
 		/* ZB_CNTL */
-		if (ib_chunk->kdata[idx] & 2) {
+		if (idx_value & 2) {
 			track->z_enabled = true;
 		} else {
 			track->z_enabled = false;
@@ -868,7 +772,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		break;
 	case 0x4F10:
 		/* ZB_FORMAT */
-		switch ((ib_chunk->kdata[idx] & 0xF)) {
+		switch ((idx_value & 0xF)) {
 		case 0:
 		case 1:
 			track->zb.cpp = 2;
@@ -878,7 +782,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 			break;
 		default:
 			DRM_ERROR("Invalid z buffer format (%d) !\n",
-				  (ib_chunk->kdata[idx] & 0xF));
+				  (idx_value & 0xF));
 			return -EINVAL;
 		}
 		break;
@@ -897,17 +801,17 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= R300_DEPTHMICROTILE_TILED;;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
-		track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
+		track->zb.pitch = idx_value & 0x3FFC;
 		break;
 	case 0x4104:
 		for (i = 0; i < 16; i++) {
 			bool enabled;
 
-			enabled = !!(ib_chunk->kdata[idx] & (1 << i));
+			enabled = !!(idx_value & (1 << i));
 			track->textures[i].enabled = enabled;
 		}
 		break;
@@ -929,9 +833,9 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	case 0x44FC:
 		/* TX_FORMAT1_[0-15] */
 		i = (reg - 0x44C0) >> 2;
-		tmp = (ib_chunk->kdata[idx] >> 25) & 0x3;
+		tmp = (idx_value >> 25) & 0x3;
 		track->textures[i].tex_coord_type = tmp;
-		switch ((ib_chunk->kdata[idx] & 0x1F)) {
+		switch ((idx_value & 0x1F)) {
 		case R300_TX_FORMAT_X8:
 		case R300_TX_FORMAT_Y4X4:
 		case R300_TX_FORMAT_Z3Y3X2:
@@ -971,7 +875,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 			break;
 		default:
 			DRM_ERROR("Invalid texture format %u\n",
-				  (ib_chunk->kdata[idx] & 0x1F));
+				  (idx_value & 0x1F));
 			return -EINVAL;
 			break;
 		}
@@ -994,11 +898,11 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	case 0x443C:
 		/* TX_FILTER0_[0-15] */
 		i = (reg - 0x4400) >> 2;
-		tmp = ib_chunk->kdata[idx] & 0x7;
+		tmp = idx_value & 0x7;
 		if (tmp == 2 || tmp == 4 || tmp == 6) {
 			track->textures[i].roundup_w = false;
 		}
-		tmp = (ib_chunk->kdata[idx] >> 3) & 0x7;
+		tmp = (idx_value >> 3) & 0x7;
 		if (tmp == 2 || tmp == 4 || tmp == 6) {
 			track->textures[i].roundup_h = false;
 		}
@@ -1021,12 +925,12 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	case 0x453C:
 		/* TX_FORMAT2_[0-15] */
 		i = (reg - 0x4500) >> 2;
-		tmp = ib_chunk->kdata[idx] & 0x3FFF;
+		tmp = idx_value & 0x3FFF;
 		track->textures[i].pitch = tmp + 1;
 		if (p->rdev->family >= CHIP_RV515) {
-			tmp = ((ib_chunk->kdata[idx] >> 15) & 1) << 11;
+			tmp = ((idx_value >> 15) & 1) << 11;
 			track->textures[i].width_11 = tmp;
-			tmp = ((ib_chunk->kdata[idx] >> 16) & 1) << 11;
+			tmp = ((idx_value >> 16) & 1) << 11;
 			track->textures[i].height_11 = tmp;
 		}
 		break;
@@ -1048,15 +952,15 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	case 0x44BC:
 		/* TX_FORMAT0_[0-15] */
 		i = (reg - 0x4480) >> 2;
-		tmp = ib_chunk->kdata[idx] & 0x7FF;
+		tmp = idx_value & 0x7FF;
 		track->textures[i].width = tmp + 1;
-		tmp = (ib_chunk->kdata[idx] >> 11) & 0x7FF;
+		tmp = (idx_value >> 11) & 0x7FF;
 		track->textures[i].height = tmp + 1;
-		tmp = (ib_chunk->kdata[idx] >> 26) & 0xF;
+		tmp = (idx_value >> 26) & 0xF;
 		track->textures[i].num_levels = tmp;
-		tmp = ib_chunk->kdata[idx] & (1 << 31);
+		tmp = idx_value & (1 << 31);
 		track->textures[i].use_pitch = !!tmp;
-		tmp = (ib_chunk->kdata[idx] >> 22) & 0xF;
+		tmp = (idx_value >> 22) & 0xF;
 		track->textures[i].txdepth = tmp;
 		break;
 	case R300_ZB_ZPASS_ADDR:
@@ -1067,7 +971,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case 0x4be8:
 		/* valid register only on RV530 */
@@ -1085,60 +989,20 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 static int r300_packet3_check(struct radeon_cs_parser *p,
 			      struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
-
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
 	unsigned idx;
-	unsigned i, c;
 	int r;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
 	track = (struct r100_cs_track *)p->track;
 	switch(pkt->opcode) {
 	case PACKET3_3D_LOAD_VBPNTR:
-		c = ib_chunk->kdata[idx++] & 0x1F;
-		track->num_arrays = c;
-		for (i = 0; i < (c - 1); i+=2, idx+=3) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 1].robj = reloc->robj;
-			track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24;
-			track->arrays[i + 1].esize &= 0x7F;
-		}
-		if (c & 1) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-		}
+		r = r100_packet3_load_vbpntr(p, pkt, idx);
+		if (r)
+			return r;
 		break;
 	case PACKET3_INDX_BUFFER:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1147,7 +1011,7 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
 		r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
 		if (r) {
 			return r;
@@ -1158,11 +1022,11 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 		/* Number of dwords is vtx_size * (num_vertices - 1)
 		 * PRIM_WALK must be equal to 3 vertex data in embedded
 		 * in cmd stream */
-		if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx+1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
@@ -1173,11 +1037,11 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 		/* Number of dwords is vtx_size * (num_vertices - 1)
 		 * PRIM_WALK must be equal to 3 vertex data in embedded
 		 * in cmd stream */
-		if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		track->immd_dwords = pkt->count;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
@@ -1185,28 +1049,28 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 		}
 		break;
 	case PACKET3_3D_DRAW_VBUF:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
 		}
 		break;
 	case PACKET3_3D_DRAW_VBUF_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
 		}
 		break;
 	case PACKET3_3D_DRAW_INDX:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
 		}
 		break;
 	case PACKET3_3D_DRAW_INDX_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
@@ -1265,12 +1129,6 @@ void r300_set_reg_safe(struct radeon_device *rdev)
 	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r300_reg_safe_bm);
 }
 
-int r300_init(struct radeon_device *rdev)
-{
-	r300_set_reg_safe(rdev);
-	return 0;
-}
-
 void r300_mc_program(struct radeon_device *rdev)
 {
 	struct r100_mc_save save;
@@ -1304,3 +1162,198 @@ void r300_mc_program(struct radeon_device *rdev)
 		S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16));
 	r100_mc_resume(rdev, &save);
 }
+
+void r300_clock_startup(struct radeon_device *rdev)
+{
+	u32 tmp;
+
+	if (radeon_dynclks != -1 && radeon_dynclks)
+		radeon_legacy_set_clock_gating(rdev, 1);
+	/* We need to force on some of the block */
+	tmp = RREG32_PLL(R_00000D_SCLK_CNTL);
+	tmp |= S_00000D_FORCE_CP(1) | S_00000D_FORCE_VIP(1);
+	if ((rdev->family == CHIP_RV350) || (rdev->family == CHIP_RV380))
+		tmp |= S_00000D_FORCE_VAP(1);
+	WREG32_PLL(R_00000D_SCLK_CNTL, tmp);
+}
+
+static int r300_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	r300_mc_program(rdev);
+	/* Resume clock */
+	r300_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	r300_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	if (rdev->flags & RADEON_IS_PCIE) {
+		r = rv370_pcie_gart_enable(rdev);
+		if (r)
+			return r;
+	}
+	if (rdev->flags & RADEON_IS_PCI) {
+		r = r100_pci_gart_enable(rdev);
+		if (r)
+			return r;
+	}
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	r100_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int r300_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	if (rdev->flags & RADEON_IS_PCI)
+		r100_pci_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	r300_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	radeon_combios_asic_init(rdev->ddev);
+	/* Resume clock after posting */
+	r300_clock_startup(rdev);
+	return r300_startup(rdev);
+}
+
+int r300_suspend(struct radeon_device *rdev)
+{
+	r100_cp_disable(rdev);
+	r100_wb_disable(rdev);
+	r100_irq_disable(rdev);
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	if (rdev->flags & RADEON_IS_PCI)
+		r100_pci_gart_disable(rdev);
+	return 0;
+}
+
+void r300_fini(struct radeon_device *rdev)
+{
+	r300_suspend(rdev);
+	r100_cp_fini(rdev);
+	r100_wb_fini(rdev);
+	r100_ib_fini(rdev);
+	radeon_gem_fini(rdev);
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_fini(rdev);
+	if (rdev->flags & RADEON_IS_PCI)
+		r100_pci_gart_fini(rdev);
+	radeon_irq_kms_fini(rdev);
+	radeon_fence_driver_fini(rdev);
+	radeon_object_fini(rdev);
+	radeon_atombios_fini(rdev);
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+}
+
+int r300_init(struct radeon_device *rdev)
+{
+	int r;
+
+	/* Disable VGA */
+	r100_vga_render_disable(rdev);
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		dev_err(rdev->dev, "Expecting combios for RS400/RS480 GPU\n");
+		return -EINVAL;
+	} else {
+		r = radeon_combios_init(rdev);
+		if (r)
+			return r;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		radeon_combios_asic_init(rdev->ddev);
+	}
+	/* Set asic errata */
+	r300_errata(rdev);
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	r300_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r420_mc_init(rdev);
+	if (r)
+		return r;
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	if (rdev->flags & RADEON_IS_PCIE) {
+		r = rv370_pcie_gart_init(rdev);
+		if (r)
+			return r;
+	}
+	if (rdev->flags & RADEON_IS_PCI) {
+		r = r100_pci_gart_init(rdev);
+		if (r)
+			return r;
+	}
+	r300_set_reg_safe(rdev);
+	rdev->accel_working = true;
+	r = r300_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		r300_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		if (rdev->flags & RADEON_IS_PCIE)
+			rv370_pcie_gart_fini(rdev);
+		if (rdev->flags & RADEON_IS_PCI)
+			r100_pci_gart_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
+	return 0;
+}
diff --git a/drivers/gpu/drm/radeon/r300d.h b/drivers/gpu/drm/radeon/r300d.h
index d4fa3eb1074f..4c73114f0de9 100644
--- a/drivers/gpu/drm/radeon/r300d.h
+++ b/drivers/gpu/drm/radeon/r300d.h
@@ -96,6 +96,211 @@
 #define   S_000170_AGP_BASE_ADDR(x)                    (((x) & 0xFFFFFFFF) << 0)
 #define   G_000170_AGP_BASE_ADDR(x)                    (((x) >> 0) & 0xFFFFFFFF)
 #define   C_000170_AGP_BASE_ADDR                       0x00000000
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
 
 
+#define R_00000D_SCLK_CNTL                           0x00000D
+#define   S_00000D_SCLK_SRC_SEL(x)                     (((x) & 0x7) << 0)
+#define   G_00000D_SCLK_SRC_SEL(x)                     (((x) >> 0) & 0x7)
+#define   C_00000D_SCLK_SRC_SEL                        0xFFFFFFF8
+#define   S_00000D_CP_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 3)
+#define   G_00000D_CP_MAX_DYN_STOP_LAT(x)              (((x) >> 3) & 0x1)
+#define   C_00000D_CP_MAX_DYN_STOP_LAT                 0xFFFFFFF7
+#define   S_00000D_HDP_MAX_DYN_STOP_LAT(x)             (((x) & 0x1) << 4)
+#define   G_00000D_HDP_MAX_DYN_STOP_LAT(x)             (((x) >> 4) & 0x1)
+#define   C_00000D_HDP_MAX_DYN_STOP_LAT                0xFFFFFFEF
+#define   S_00000D_TV_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 5)
+#define   G_00000D_TV_MAX_DYN_STOP_LAT(x)              (((x) >> 5) & 0x1)
+#define   C_00000D_TV_MAX_DYN_STOP_LAT                 0xFFFFFFDF
+#define   S_00000D_E2_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 6)
+#define   G_00000D_E2_MAX_DYN_STOP_LAT(x)              (((x) >> 6) & 0x1)
+#define   C_00000D_E2_MAX_DYN_STOP_LAT                 0xFFFFFFBF
+#define   S_00000D_SE_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 7)
+#define   G_00000D_SE_MAX_DYN_STOP_LAT(x)              (((x) >> 7) & 0x1)
+#define   C_00000D_SE_MAX_DYN_STOP_LAT                 0xFFFFFF7F
+#define   S_00000D_IDCT_MAX_DYN_STOP_LAT(x)            (((x) & 0x1) << 8)
+#define   G_00000D_IDCT_MAX_DYN_STOP_LAT(x)            (((x) >> 8) & 0x1)
+#define   C_00000D_IDCT_MAX_DYN_STOP_LAT               0xFFFFFEFF
+#define   S_00000D_VIP_MAX_DYN_STOP_LAT(x)             (((x) & 0x1) << 9)
+#define   G_00000D_VIP_MAX_DYN_STOP_LAT(x)             (((x) >> 9) & 0x1)
+#define   C_00000D_VIP_MAX_DYN_STOP_LAT                0xFFFFFDFF
+#define   S_00000D_RE_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 10)
+#define   G_00000D_RE_MAX_DYN_STOP_LAT(x)              (((x) >> 10) & 0x1)
+#define   C_00000D_RE_MAX_DYN_STOP_LAT                 0xFFFFFBFF
+#define   S_00000D_PB_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 11)
+#define   G_00000D_PB_MAX_DYN_STOP_LAT(x)              (((x) >> 11) & 0x1)
+#define   C_00000D_PB_MAX_DYN_STOP_LAT                 0xFFFFF7FF
+#define   S_00000D_TAM_MAX_DYN_STOP_LAT(x)             (((x) & 0x1) << 12)
+#define   G_00000D_TAM_MAX_DYN_STOP_LAT(x)             (((x) >> 12) & 0x1)
+#define   C_00000D_TAM_MAX_DYN_STOP_LAT                0xFFFFEFFF
+#define   S_00000D_TDM_MAX_DYN_STOP_LAT(x)             (((x) & 0x1) << 13)
+#define   G_00000D_TDM_MAX_DYN_STOP_LAT(x)             (((x) >> 13) & 0x1)
+#define   C_00000D_TDM_MAX_DYN_STOP_LAT                0xFFFFDFFF
+#define   S_00000D_RB_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 14)
+#define   G_00000D_RB_MAX_DYN_STOP_LAT(x)              (((x) >> 14) & 0x1)
+#define   C_00000D_RB_MAX_DYN_STOP_LAT                 0xFFFFBFFF
+#define   S_00000D_FORCE_DISP2(x)                      (((x) & 0x1) << 15)
+#define   G_00000D_FORCE_DISP2(x)                      (((x) >> 15) & 0x1)
+#define   C_00000D_FORCE_DISP2                         0xFFFF7FFF
+#define   S_00000D_FORCE_CP(x)                         (((x) & 0x1) << 16)
+#define   G_00000D_FORCE_CP(x)                         (((x) >> 16) & 0x1)
+#define   C_00000D_FORCE_CP                            0xFFFEFFFF
+#define   S_00000D_FORCE_HDP(x)                        (((x) & 0x1) << 17)
+#define   G_00000D_FORCE_HDP(x)                        (((x) >> 17) & 0x1)
+#define   C_00000D_FORCE_HDP                           0xFFFDFFFF
+#define   S_00000D_FORCE_DISP1(x)                      (((x) & 0x1) << 18)
+#define   G_00000D_FORCE_DISP1(x)                      (((x) >> 18) & 0x1)
+#define   C_00000D_FORCE_DISP1                         0xFFFBFFFF
+#define   S_00000D_FORCE_TOP(x)                        (((x) & 0x1) << 19)
+#define   G_00000D_FORCE_TOP(x)                        (((x) >> 19) & 0x1)
+#define   C_00000D_FORCE_TOP                           0xFFF7FFFF
+#define   S_00000D_FORCE_E2(x)                         (((x) & 0x1) << 20)
+#define   G_00000D_FORCE_E2(x)                         (((x) >> 20) & 0x1)
+#define   C_00000D_FORCE_E2                            0xFFEFFFFF
+#define   S_00000D_FORCE_SE(x)                         (((x) & 0x1) << 21)
+#define   G_00000D_FORCE_SE(x)                         (((x) >> 21) & 0x1)
+#define   C_00000D_FORCE_SE                            0xFFDFFFFF
+#define   S_00000D_FORCE_IDCT(x)                       (((x) & 0x1) << 22)
+#define   G_00000D_FORCE_IDCT(x)                       (((x) >> 22) & 0x1)
+#define   C_00000D_FORCE_IDCT                          0xFFBFFFFF
+#define   S_00000D_FORCE_VIP(x)                        (((x) & 0x1) << 23)
+#define   G_00000D_FORCE_VIP(x)                        (((x) >> 23) & 0x1)
+#define   C_00000D_FORCE_VIP                           0xFF7FFFFF
+#define   S_00000D_FORCE_RE(x)                         (((x) & 0x1) << 24)
+#define   G_00000D_FORCE_RE(x)                         (((x) >> 24) & 0x1)
+#define   C_00000D_FORCE_RE                            0xFEFFFFFF
+#define   S_00000D_FORCE_PB(x)                         (((x) & 0x1) << 25)
+#define   G_00000D_FORCE_PB(x)                         (((x) >> 25) & 0x1)
+#define   C_00000D_FORCE_PB                            0xFDFFFFFF
+#define   S_00000D_FORCE_TAM(x)                        (((x) & 0x1) << 26)
+#define   G_00000D_FORCE_TAM(x)                        (((x) >> 26) & 0x1)
+#define   C_00000D_FORCE_TAM                           0xFBFFFFFF
+#define   S_00000D_FORCE_TDM(x)                        (((x) & 0x1) << 27)
+#define   G_00000D_FORCE_TDM(x)                        (((x) >> 27) & 0x1)
+#define   C_00000D_FORCE_TDM                           0xF7FFFFFF
+#define   S_00000D_FORCE_RB(x)                         (((x) & 0x1) << 28)
+#define   G_00000D_FORCE_RB(x)                         (((x) >> 28) & 0x1)
+#define   C_00000D_FORCE_RB                            0xEFFFFFFF
+#define   S_00000D_FORCE_TV_SCLK(x)                    (((x) & 0x1) << 29)
+#define   G_00000D_FORCE_TV_SCLK(x)                    (((x) >> 29) & 0x1)
+#define   C_00000D_FORCE_TV_SCLK                       0xDFFFFFFF
+#define   S_00000D_FORCE_SUBPIC(x)                     (((x) & 0x1) << 30)
+#define   G_00000D_FORCE_SUBPIC(x)                     (((x) >> 30) & 0x1)
+#define   C_00000D_FORCE_SUBPIC                        0xBFFFFFFF
+#define   S_00000D_FORCE_OV0(x)                        (((x) & 0x1) << 31)
+#define   G_00000D_FORCE_OV0(x)                        (((x) >> 31) & 0x1)
+#define   C_00000D_FORCE_OV0                           0x7FFFFFFF
+
 #endif
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 49a2fdc57d27..5c7fe52de30e 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -155,6 +155,9 @@ static void r420_debugfs(struct radeon_device *rdev)
 static void r420_clock_resume(struct radeon_device *rdev)
 {
 	u32 sclk_cntl;
+
+	if (radeon_dynclks != -1 && radeon_dynclks)
+		radeon_atom_set_clock_gating(rdev, 1);
 	sclk_cntl = RREG32_PLL(R_00000D_SCLK_CNTL);
 	sclk_cntl |= S_00000D_FORCE_CP(1) | S_00000D_FORCE_VIP(1);
 	if (rdev->family == CHIP_R420)
@@ -167,6 +170,8 @@ static int r420_startup(struct radeon_device *rdev)
 	int r;
 
 	r300_mc_program(rdev);
+	/* Resume clock */
+	r420_clock_resume(rdev);
 	/* Initialize GART (initialize after TTM so we can allocate
 	 * memory through TTM but finalize after TTM) */
 	if (rdev->flags & RADEON_IS_PCIE) {
@@ -267,7 +272,6 @@ int r420_init(struct radeon_device *rdev)
 {
 	int r;
 
-	rdev->new_init_path = true;
 	/* Initialize scratch registers */
 	radeon_scratch_init(rdev);
 	/* Initialize surface registers */
diff --git a/drivers/gpu/drm/radeon/r420d.h b/drivers/gpu/drm/radeon/r420d.h
index a48a7db1e2aa..fc78d31a0b4a 100644
--- a/drivers/gpu/drm/radeon/r420d.h
+++ b/drivers/gpu/drm/radeon/r420d.h
@@ -212,9 +212,9 @@
 #define   S_00000D_FORCE_E2(x)                         (((x) & 0x1) << 20)
 #define   G_00000D_FORCE_E2(x)                         (((x) >> 20) & 0x1)
 #define   C_00000D_FORCE_E2                            0xFFEFFFFF
-#define   S_00000D_FORCE_SE(x)                         (((x) & 0x1) << 21)
-#define   G_00000D_FORCE_SE(x)                         (((x) >> 21) & 0x1)
-#define   C_00000D_FORCE_SE                            0xFFDFFFFF
+#define   S_00000D_FORCE_VAP(x)                        (((x) & 0x1) << 21)
+#define   G_00000D_FORCE_VAP(x)                        (((x) >> 21) & 0x1)
+#define   C_00000D_FORCE_VAP                           0xFFDFFFFF
 #define   S_00000D_FORCE_IDCT(x)                       (((x) & 0x1) << 22)
 #define   G_00000D_FORCE_IDCT(x)                       (((x) >> 22) & 0x1)
 #define   C_00000D_FORCE_IDCT                          0xFFBFFFFF
@@ -224,24 +224,24 @@
 #define   S_00000D_FORCE_RE(x)                         (((x) & 0x1) << 24)
 #define   G_00000D_FORCE_RE(x)                         (((x) >> 24) & 0x1)
 #define   C_00000D_FORCE_RE                            0xFEFFFFFF
-#define   S_00000D_FORCE_PB(x)                         (((x) & 0x1) << 25)
-#define   G_00000D_FORCE_PB(x)                         (((x) >> 25) & 0x1)
-#define   C_00000D_FORCE_PB                            0xFDFFFFFF
+#define   S_00000D_FORCE_SR(x)                         (((x) & 0x1) << 25)
+#define   G_00000D_FORCE_SR(x)                         (((x) >> 25) & 0x1)
+#define   C_00000D_FORCE_SR                            0xFDFFFFFF
 #define   S_00000D_FORCE_PX(x)                         (((x) & 0x1) << 26)
 #define   G_00000D_FORCE_PX(x)                         (((x) >> 26) & 0x1)
 #define   C_00000D_FORCE_PX                            0xFBFFFFFF
 #define   S_00000D_FORCE_TX(x)                         (((x) & 0x1) << 27)
 #define   G_00000D_FORCE_TX(x)                         (((x) >> 27) & 0x1)
 #define   C_00000D_FORCE_TX                            0xF7FFFFFF
-#define   S_00000D_FORCE_RB(x)                         (((x) & 0x1) << 28)
-#define   G_00000D_FORCE_RB(x)                         (((x) >> 28) & 0x1)
-#define   C_00000D_FORCE_RB                            0xEFFFFFFF
+#define   S_00000D_FORCE_US(x)                         (((x) & 0x1) << 28)
+#define   G_00000D_FORCE_US(x)                         (((x) >> 28) & 0x1)
+#define   C_00000D_FORCE_US                            0xEFFFFFFF
 #define   S_00000D_FORCE_TV_SCLK(x)                    (((x) & 0x1) << 29)
 #define   G_00000D_FORCE_TV_SCLK(x)                    (((x) >> 29) & 0x1)
 #define   C_00000D_FORCE_TV_SCLK                       0xDFFFFFFF
-#define   S_00000D_FORCE_SUBPIC(x)                     (((x) & 0x1) << 30)
-#define   G_00000D_FORCE_SUBPIC(x)                     (((x) >> 30) & 0x1)
-#define   C_00000D_FORCE_SUBPIC                        0xBFFFFFFF
+#define   S_00000D_FORCE_SU(x)                         (((x) & 0x1) << 30)
+#define   G_00000D_FORCE_SU(x)                         (((x) >> 30) & 0x1)
+#define   C_00000D_FORCE_SU                            0xBFFFFFFF
 #define   S_00000D_FORCE_OV0(x)                        (((x) & 0x1) << 31)
 #define   G_00000D_FORCE_OV0(x)                        (((x) >> 31) & 0x1)
 #define   C_00000D_FORCE_OV0                           0x7FFFFFFF
diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h
index e1d5e0331e19..868add6e166d 100644
--- a/drivers/gpu/drm/radeon/r500_reg.h
+++ b/drivers/gpu/drm/radeon/r500_reg.h
@@ -445,6 +445,8 @@
 #define AVIVO_D1MODE_VBLANK_STATUS              0x6534
 #       define AVIVO_VBLANK_ACK                 (1 << 4)
 #define AVIVO_D1MODE_VLINE_START_END            0x6538
+#define AVIVO_D1MODE_VLINE_STATUS               0x653c
+#       define AVIVO_D1MODE_VLINE_STAT          (1 << 12)
 #define AVIVO_DxMODE_INT_MASK                   0x6540
 #       define AVIVO_D1MODE_INT_MASK            (1 << 0)
 #       define AVIVO_D2MODE_INT_MASK            (1 << 8)
@@ -502,6 +504,7 @@
 
 #define AVIVO_D2MODE_VBLANK_STATUS              0x6d34
 #define AVIVO_D2MODE_VLINE_START_END            0x6d38
+#define AVIVO_D2MODE_VLINE_STATUS               0x6d3c
 #define AVIVO_D2MODE_VIEWPORT_START             0x6d80
 #define AVIVO_D2MODE_VIEWPORT_SIZE              0x6d84
 #define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6d88
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index d4b0b9d2e39b..a555b7b19b48 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -26,108 +26,13 @@
  *          Jerome Glisse
  */
 #include "drmP.h"
-#include "radeon_reg.h"
 #include "radeon.h"
+#include "atom.h"
+#include "r520d.h"
 
-/* r520,rv530,rv560,rv570,r580 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
-int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
+/* This files gather functions specifics to: r520,rv530,rv560,rv570,r580 */
 
-/* This files gather functions specifics to:
- * r520,rv530,rv560,rv570,r580
- *
- * Some of these functions might be used by newer ASICs.
- */
-void r520_gpu_init(struct radeon_device *rdev);
-int r520_mc_wait_for_idle(struct radeon_device *rdev);
-
-
-/*
- * MC
- */
-int r520_mc_init(struct radeon_device *rdev)
-{
-	uint32_t tmp;
-	int r;
-
-	if (r100_debugfs_rbbm_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
-	}
-	if (rv515_debugfs_pipes_info_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for pipes !\n");
-	}
-	if (rv515_debugfs_ga_info_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for pipes !\n");
-	}
-
-	r520_gpu_init(rdev);
-	rv370_pcie_gart_disable(rdev);
-
-	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
-	rdev->mc.gtt_location = 0xFFFFFFFFUL;
-	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
-		} else {
-			rdev->mc.gtt_location = rdev->mc.agp_base;
-		}
-	}
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	/* Program GPU memory space */
-	rs600_mc_disable_clients(rdev);
-	if (r520_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(R520_MC_FB_LOCATION, tmp);
-	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
-	WREG32(0x310, rdev->mc.vram_location);
-	if (rdev->flags & RADEON_IS_AGP) {
-		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-		tmp = REG_SET(R520_MC_AGP_TOP, tmp >> 16);
-		tmp |= REG_SET(R520_MC_AGP_START, rdev->mc.gtt_location >> 16);
-		WREG32_MC(R520_MC_AGP_LOCATION, tmp);
-		WREG32_MC(R520_MC_AGP_BASE, rdev->mc.agp_base);
-		WREG32_MC(R520_MC_AGP_BASE_2, 0);
-	} else {
-		WREG32_MC(R520_MC_AGP_LOCATION, 0x0FFFFFFF);
-		WREG32_MC(R520_MC_AGP_BASE, 0);
-		WREG32_MC(R520_MC_AGP_BASE_2, 0);
-	}
-	return 0;
-}
-
-void r520_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
-void r520_errata(struct radeon_device *rdev)
-{
-	rdev->pll_errata = 0;
-}
-
-int r520_mc_wait_for_idle(struct radeon_device *rdev)
+static int r520_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
 	uint32_t tmp;
@@ -143,12 +48,12 @@ int r520_mc_wait_for_idle(struct radeon_device *rdev)
 	return -1;
 }
 
-void r520_gpu_init(struct radeon_device *rdev)
+static void r520_gpu_init(struct radeon_device *rdev)
 {
 	unsigned pipe_select_current, gb_pipe_select, tmp;
 
 	r100_hdp_reset(rdev);
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 	/*
 	 * DST_PIPE_CONFIG		0x170C
 	 * GB_TILE_CONFIG		0x4018
@@ -186,10 +91,6 @@ void r520_gpu_init(struct radeon_device *rdev)
 	}
 }
 
-
-/*
- * VRAM info
- */
 static void r520_vram_get_type(struct radeon_device *rdev)
 {
 	uint32_t tmp;
@@ -233,7 +134,167 @@ void r520_vram_info(struct radeon_device *rdev)
 	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
 }
 
-void r520_bandwidth_update(struct radeon_device *rdev)
+void r520_mc_program(struct radeon_device *rdev)
+{
+	struct rv515_mc_save save;
+
+	/* Stops all mc clients */
+	rv515_mc_stop(rdev, &save);
+
+	/* Wait for mc idle */
+	if (r520_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+	/* Write VRAM size in case we are limiting it */
+	WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	/* Program MC, should be a 32bits limited address space */
+	WREG32_MC(R_000004_MC_FB_LOCATION,
+			S_000004_MC_FB_START(rdev->mc.vram_start >> 16) |
+			S_000004_MC_FB_TOP(rdev->mc.vram_end >> 16));
+	WREG32(R_000134_HDP_FB_LOCATION,
+		S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+	if (rdev->flags & RADEON_IS_AGP) {
+		WREG32_MC(R_000005_MC_AGP_LOCATION,
+			S_000005_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+			S_000005_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+		WREG32_MC(R_000006_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+		WREG32_MC(R_000007_AGP_BASE_2,
+			S_000007_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base)));
+	} else {
+		WREG32_MC(R_000005_MC_AGP_LOCATION, 0xFFFFFFFF);
+		WREG32_MC(R_000006_AGP_BASE, 0);
+		WREG32_MC(R_000007_AGP_BASE_2, 0);
+	}
+
+	rv515_mc_resume(rdev, &save);
+}
+
+static int r520_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	r520_mc_program(rdev);
+	/* Resume clock */
+	rv515_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	r520_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	if (rdev->flags & RADEON_IS_PCIE) {
+		r = rv370_pcie_gart_enable(rdev);
+		if (r)
+			return r;
+	}
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	rs600_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int r520_resume(struct radeon_device *rdev)
 {
-	rv515_bandwidth_avivo_update(rdev);
+	/* Make sur GART are not working */
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	rv515_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	atom_asic_init(rdev->mode_info.atom_context);
+	/* Resume clock after posting */
+	rv515_clock_startup(rdev);
+	return r520_startup(rdev);
+}
+
+int r520_init(struct radeon_device *rdev)
+{
+	int r;
+
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		r = radeon_atombios_init(rdev);
+		if (r)
+			return r;
+	} else {
+		dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+		return -EINVAL;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		atom_asic_init(rdev->mode_info.atom_context);
+	}
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	r520_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r420_mc_init(rdev);
+	if (r)
+		return r;
+	rv515_debugfs(rdev);
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	r = rv370_pcie_gart_init(rdev);
+	if (r)
+		return r;
+	rv515_set_safe_registers(rdev);
+	rdev->accel_working = true;
+	r = r520_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		rv515_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		rv370_pcie_gart_fini(rdev);
+		radeon_agp_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
+	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/r520d.h b/drivers/gpu/drm/radeon/r520d.h
new file mode 100644
index 000000000000..61af61f644bc
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r520d.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __R520D_H__
+#define __R520D_H__
+
+/* Registers */
+#define R_0000F8_CONFIG_MEMSIZE                      0x0000F8
+#define   S_0000F8_CONFIG_MEMSIZE(x)                   (((x) & 0xFFFFFFFF) << 0)
+#define   G_0000F8_CONFIG_MEMSIZE(x)                   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_0000F8_CONFIG_MEMSIZE                      0x00000000
+#define R_000134_HDP_FB_LOCATION                     0x000134
+#define   S_000134_HDP_FB_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000134_HDP_FB_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000134_HDP_FB_START                        0xFFFF0000
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_RBBM_HIBUSY(x)                      (((x) & 0x1) << 28)
+#define   G_000E40_RBBM_HIBUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_000E40_RBBM_HIBUSY                         0xEFFFFFFF
+#define   S_000E40_SKID_CFBUSY(x)                      (((x) & 0x1) << 29)
+#define   G_000E40_SKID_CFBUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_000E40_SKID_CFBUSY                         0xDFFFFFFF
+#define   S_000E40_VAP_VF_BUSY(x)                      (((x) & 0x1) << 30)
+#define   G_000E40_VAP_VF_BUSY(x)                      (((x) >> 30) & 0x1)
+#define   C_000E40_VAP_VF_BUSY                         0xBFFFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
+
+
+#define R_000004_MC_FB_LOCATION                      0x000004
+#define   S_000004_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000004_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000004_MC_FB_START                         0xFFFF0000
+#define   S_000004_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000004_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000004_MC_FB_TOP                           0x0000FFFF
+#define R_000005_MC_AGP_LOCATION                     0x000005
+#define   S_000005_MC_AGP_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000005_MC_AGP_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000005_MC_AGP_START                        0xFFFF0000
+#define   S_000005_MC_AGP_TOP(x)                       (((x) & 0xFFFF) << 16)
+#define   G_000005_MC_AGP_TOP(x)                       (((x) >> 16) & 0xFFFF)
+#define   C_000005_MC_AGP_TOP                          0x0000FFFF
+#define R_000006_AGP_BASE                            0x000006
+#define   S_000006_AGP_BASE_ADDR(x)                    (((x) & 0xFFFFFFFF) << 0)
+#define   G_000006_AGP_BASE_ADDR(x)                    (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000006_AGP_BASE_ADDR                       0x00000000
+#define R_000007_AGP_BASE_2                          0x000007
+#define   S_000007_AGP_BASE_ADDR_2(x)                  (((x) & 0xF) << 0)
+#define   G_000007_AGP_BASE_ADDR_2(x)                  (((x) >> 0) & 0xF)
+#define   C_000007_AGP_BASE_ADDR_2                     0xFFFFFFF0
+
+#endif
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index eab31c1d6df1..609719490ec2 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -33,8 +33,8 @@
 #include "radeon.h"
 #include "radeon_mode.h"
 #include "r600d.h"
-#include "avivod.h"
 #include "atom.h"
+#include "avivod.h"
 
 #define PFP_UCODE_SIZE 576
 #define PM4_UCODE_SIZE 1792
@@ -65,16 +65,11 @@ MODULE_FIRMWARE("radeon/RV710_me.bin");
 
 int r600_debugfs_mc_info_init(struct radeon_device *rdev);
 
-/* This files gather functions specifics to:
- * r600,rv610,rv630,rv620,rv635,rv670
- *
- * Some of these functions might be used by newer ASICs.
- */
+/* r600,rv610,rv630,rv620,rv635,rv670 */
 int r600_mc_wait_for_idle(struct radeon_device *rdev);
 void r600_gpu_init(struct radeon_device *rdev);
 void r600_fini(struct radeon_device *rdev);
 
-
 /*
  * R600 PCIE GART
  */
@@ -168,7 +163,7 @@ int r600_pcie_gart_enable(struct radeon_device *rdev)
 	WREG32(MC_VM_L1_TLB_MCB_RD_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
 	WREG32(MC_VM_L1_TLB_MCB_WR_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
 	WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12);
-	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end - 1) >> 12);
+	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12);
 	WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12);
 	WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) |
 				RANGE_PROTECTION_FAULT_ENABLE_DEFAULT);
@@ -225,6 +220,40 @@ void r600_pcie_gart_fini(struct radeon_device *rdev)
 	radeon_gart_fini(rdev);
 }
 
+void r600_agp_enable(struct radeon_device *rdev)
+{
+	u32 tmp;
+	int i;
+
+	/* Setup L2 cache */
+	WREG32(VM_L2_CNTL, ENABLE_L2_CACHE | ENABLE_L2_FRAGMENT_PROCESSING |
+				ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE |
+				EFFECTIVE_L2_QUEUE_SIZE(7));
+	WREG32(VM_L2_CNTL2, 0);
+	WREG32(VM_L2_CNTL3, BANK_SELECT_0(0) | BANK_SELECT_1(1));
+	/* Setup TLB control */
+	tmp = ENABLE_L1_TLB | ENABLE_L1_FRAGMENT_PROCESSING |
+		SYSTEM_ACCESS_MODE_NOT_IN_SYS |
+		EFFECTIVE_L1_TLB_SIZE(5) | EFFECTIVE_L1_QUEUE_SIZE(5) |
+		ENABLE_WAIT_L2_QUERY;
+	WREG32(MC_VM_L1_TLB_MCB_RD_SYS_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCB_WR_SYS_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCB_RD_HDP_CNTL, tmp | ENABLE_L1_STRICT_ORDERING);
+	WREG32(MC_VM_L1_TLB_MCB_WR_HDP_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCD_RD_A_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCD_WR_A_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCD_RD_B_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCD_WR_B_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCB_RD_GFX_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCB_WR_GFX_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCB_RD_PDMA_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCB_WR_PDMA_CNTL, tmp);
+	WREG32(MC_VM_L1_TLB_MCB_RD_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
+	WREG32(MC_VM_L1_TLB_MCB_WR_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
+	for (i = 0; i < 7; i++)
+		WREG32(VM_CONTEXT0_CNTL + (i * 4), 0);
+}
+
 int r600_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
@@ -240,14 +269,9 @@ int r600_mc_wait_for_idle(struct radeon_device *rdev)
 	return -1;
 }
 
-static void r600_mc_resume(struct radeon_device *rdev)
+static void r600_mc_program(struct radeon_device *rdev)
 {
-	u32 d1vga_control, d2vga_control;
-	u32 vga_render_control, vga_hdp_control;
-	u32 d1crtc_control, d2crtc_control;
-	u32 new_d1grph_primary, new_d1grph_secondary;
-	u32 new_d2grph_primary, new_d2grph_secondary;
-	u64 old_vram_start;
+	struct rv515_mc_save save;
 	u32 tmp;
 	int i, j;
 
@@ -261,88 +285,54 @@ static void r600_mc_resume(struct radeon_device *rdev)
 	}
 	WREG32(HDP_REG_COHERENCY_FLUSH_CNTL, 0);
 
-	d1vga_control = RREG32(D1VGA_CONTROL);
-	d2vga_control = RREG32(D2VGA_CONTROL);
-	vga_render_control = RREG32(VGA_RENDER_CONTROL);
-	vga_hdp_control = RREG32(VGA_HDP_CONTROL);
-	d1crtc_control = RREG32(D1CRTC_CONTROL);
-	d2crtc_control = RREG32(D2CRTC_CONTROL);
-	old_vram_start = (u64)(RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
-	new_d1grph_primary = RREG32(D1GRPH_PRIMARY_SURFACE_ADDRESS);
-	new_d1grph_secondary = RREG32(D1GRPH_SECONDARY_SURFACE_ADDRESS);
-	new_d1grph_primary += rdev->mc.vram_start - old_vram_start;
-	new_d1grph_secondary += rdev->mc.vram_start - old_vram_start;
-	new_d2grph_primary = RREG32(D2GRPH_PRIMARY_SURFACE_ADDRESS);
-	new_d2grph_secondary = RREG32(D2GRPH_SECONDARY_SURFACE_ADDRESS);
-	new_d2grph_primary += rdev->mc.vram_start - old_vram_start;
-	new_d2grph_secondary += rdev->mc.vram_start - old_vram_start;
-
-	/* Stop all video */
-	WREG32(D1VGA_CONTROL, 0);
-	WREG32(D2VGA_CONTROL, 0);
-	WREG32(VGA_RENDER_CONTROL, 0);
-	WREG32(D1CRTC_UPDATE_LOCK, 1);
-	WREG32(D2CRTC_UPDATE_LOCK, 1);
-	WREG32(D1CRTC_CONTROL, 0);
-	WREG32(D2CRTC_CONTROL, 0);
-	WREG32(D1CRTC_UPDATE_LOCK, 0);
-	WREG32(D2CRTC_UPDATE_LOCK, 0);
-
-	mdelay(1);
+	rv515_mc_stop(rdev, &save);
 	if (r600_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "[drm] MC not idle !\n");
+		dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
 	}
-
-	/* Lockout access through VGA aperture*/
+	/* Lockout access through VGA aperture (doesn't exist before R600) */
 	WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE);
-
 	/* Update configuration */
-	WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12);
-	WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, (rdev->mc.vram_end - 1) >> 12);
+	if (rdev->flags & RADEON_IS_AGP) {
+		if (rdev->mc.vram_start < rdev->mc.gtt_start) {
+			/* VRAM before AGP */
+			WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+				rdev->mc.vram_start >> 12);
+			WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+				rdev->mc.gtt_end >> 12);
+		} else {
+			/* VRAM after AGP */
+			WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+				rdev->mc.gtt_start >> 12);
+			WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+				rdev->mc.vram_end >> 12);
+		}
+	} else {
+		WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12);
+		WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, rdev->mc.vram_end >> 12);
+	}
 	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
-	tmp = (((rdev->mc.vram_end - 1) >> 24) & 0xFFFF) << 16;
+	tmp = ((rdev->mc.vram_end >> 24) & 0xFFFF) << 16;
 	tmp |= ((rdev->mc.vram_start >> 24) & 0xFFFF);
 	WREG32(MC_VM_FB_LOCATION, tmp);
 	WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
 	WREG32(HDP_NONSURFACE_INFO, (2 << 7));
-	WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+	WREG32(HDP_NONSURFACE_SIZE, rdev->mc.mc_vram_size | 0x3FF);
 	if (rdev->flags & RADEON_IS_AGP) {
-		WREG32(MC_VM_AGP_TOP, (rdev->mc.gtt_end - 1) >> 16);
-		WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
+		WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 22);
+		WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 22);
 		WREG32(MC_VM_AGP_BASE, rdev->mc.agp_base >> 22);
 	} else {
 		WREG32(MC_VM_AGP_BASE, 0);
 		WREG32(MC_VM_AGP_TOP, 0x0FFFFFFF);
 		WREG32(MC_VM_AGP_BOT, 0x0FFFFFFF);
 	}
-	WREG32(D1GRPH_PRIMARY_SURFACE_ADDRESS, new_d1grph_primary);
-	WREG32(D1GRPH_SECONDARY_SURFACE_ADDRESS, new_d1grph_secondary);
-	WREG32(D2GRPH_PRIMARY_SURFACE_ADDRESS, new_d2grph_primary);
-	WREG32(D2GRPH_SECONDARY_SURFACE_ADDRESS, new_d2grph_secondary);
-	WREG32(VGA_MEMORY_BASE_ADDRESS, rdev->mc.vram_start);
-
-	/* Unlock host access */
-	WREG32(VGA_HDP_CONTROL, vga_hdp_control);
-
-	mdelay(1);
 	if (r600_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "[drm] MC not idle !\n");
+		dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
 	}
-
-	/* Restore video state */
-	WREG32(D1CRTC_UPDATE_LOCK, 1);
-	WREG32(D2CRTC_UPDATE_LOCK, 1);
-	WREG32(D1CRTC_CONTROL, d1crtc_control);
-	WREG32(D2CRTC_CONTROL, d2crtc_control);
-	WREG32(D1CRTC_UPDATE_LOCK, 0);
-	WREG32(D2CRTC_UPDATE_LOCK, 0);
-	WREG32(D1VGA_CONTROL, d1vga_control);
-	WREG32(D2VGA_CONTROL, d2vga_control);
-	WREG32(VGA_RENDER_CONTROL, vga_render_control);
-
+	rv515_mc_resume(rdev, &save);
 	/* we need to own VRAM, so turn off the VGA renderer here
 	 * to stop it overwriting our objects */
-	radeon_avivo_vga_render_disable(rdev);
+	rv515_vga_render_disable(rdev);
 }
 
 int r600_mc_init(struct radeon_device *rdev)
@@ -380,6 +370,13 @@ int r600_mc_init(struct radeon_device *rdev)
 	/* Setup GPU memory space */
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
+
+	if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+		rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+	if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+		rdev->mc.real_vram_size = rdev->mc.aper_size;
+
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
 		if (r)
@@ -438,9 +435,9 @@ int r600_mc_init(struct radeon_device *rdev)
 		}
 	}
 	rdev->mc.vram_start = rdev->mc.vram_location;
-	rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size;
+	rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	rdev->mc.gtt_start = rdev->mc.gtt_location;
-	rdev->mc.gtt_end = rdev->mc.gtt_location + rdev->mc.gtt_size;
+	rdev->mc.gtt_end = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
 	/* FIXME: we should enforce default clock in case GPU is not in
 	 * default setup
 	 */
@@ -456,6 +453,7 @@ int r600_mc_init(struct radeon_device *rdev)
  */
 int r600_gpu_soft_reset(struct radeon_device *rdev)
 {
+	struct rv515_mc_save save;
 	u32 grbm_busy_mask = S_008010_VC_BUSY(1) | S_008010_VGT_BUSY_NO_DMA(1) |
 				S_008010_VGT_BUSY(1) | S_008010_TA03_BUSY(1) |
 				S_008010_TC_BUSY(1) | S_008010_SX_BUSY(1) |
@@ -473,13 +471,25 @@ int r600_gpu_soft_reset(struct radeon_device *rdev)
 			S_008014_CB0_BUSY(1) | S_008014_CB1_BUSY(1) |
 			S_008014_CB2_BUSY(1) | S_008014_CB3_BUSY(1);
 	u32 srbm_reset = 0;
+	u32 tmp;
 
+	dev_info(rdev->dev, "GPU softreset \n");
+	dev_info(rdev->dev, "  R_008010_GRBM_STATUS=0x%08X\n",
+		RREG32(R_008010_GRBM_STATUS));
+	dev_info(rdev->dev, "  R_008014_GRBM_STATUS2=0x%08X\n",
+		RREG32(R_008014_GRBM_STATUS2));
+	dev_info(rdev->dev, "  R_000E50_SRBM_STATUS=0x%08X\n",
+		RREG32(R_000E50_SRBM_STATUS));
+	rv515_mc_stop(rdev, &save);
+	if (r600_mc_wait_for_idle(rdev)) {
+		dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
+	}
 	/* Disable CP parsing/prefetching */
 	WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(0xff));
 	/* Check if any of the rendering block is busy and reset it */
 	if ((RREG32(R_008010_GRBM_STATUS) & grbm_busy_mask) ||
 	    (RREG32(R_008014_GRBM_STATUS2) & grbm2_busy_mask)) {
-		WREG32(R_008020_GRBM_SOFT_RESET, S_008020_SOFT_RESET_CR(1) |
+		tmp = S_008020_SOFT_RESET_CR(1) |
 			S_008020_SOFT_RESET_DB(1) |
 			S_008020_SOFT_RESET_CB(1) |
 			S_008020_SOFT_RESET_PA(1) |
@@ -491,14 +501,18 @@ int r600_gpu_soft_reset(struct radeon_device *rdev)
 			S_008020_SOFT_RESET_TC(1) |
 			S_008020_SOFT_RESET_TA(1) |
 			S_008020_SOFT_RESET_VC(1) |
-			S_008020_SOFT_RESET_VGT(1));
+			S_008020_SOFT_RESET_VGT(1);
+		dev_info(rdev->dev, "  R_008020_GRBM_SOFT_RESET=0x%08X\n", tmp);
+		WREG32(R_008020_GRBM_SOFT_RESET, tmp);
 		(void)RREG32(R_008020_GRBM_SOFT_RESET);
 		udelay(50);
 		WREG32(R_008020_GRBM_SOFT_RESET, 0);
 		(void)RREG32(R_008020_GRBM_SOFT_RESET);
 	}
 	/* Reset CP (we always reset CP) */
-	WREG32(R_008020_GRBM_SOFT_RESET, S_008020_SOFT_RESET_CP(1));
+	tmp = S_008020_SOFT_RESET_CP(1);
+	dev_info(rdev->dev, "R_008020_GRBM_SOFT_RESET=0x%08X\n", tmp);
+	WREG32(R_008020_GRBM_SOFT_RESET, tmp);
 	(void)RREG32(R_008020_GRBM_SOFT_RESET);
 	udelay(50);
 	WREG32(R_008020_GRBM_SOFT_RESET, 0);
@@ -526,6 +540,14 @@ int r600_gpu_soft_reset(struct radeon_device *rdev)
 		srbm_reset |= S_000E60_SOFT_RESET_RLC(1);
 	if (G_000E50_SEM_BUSY(RREG32(R_000E50_SRBM_STATUS)))
 		srbm_reset |= S_000E60_SOFT_RESET_SEM(1);
+	if (G_000E50_BIF_BUSY(RREG32(R_000E50_SRBM_STATUS)))
+		srbm_reset |= S_000E60_SOFT_RESET_BIF(1);
+	dev_info(rdev->dev, "  R_000E60_SRBM_SOFT_RESET=0x%08X\n", srbm_reset);
+	WREG32(R_000E60_SRBM_SOFT_RESET, srbm_reset);
+	(void)RREG32(R_000E60_SRBM_SOFT_RESET);
+	udelay(50);
+	WREG32(R_000E60_SRBM_SOFT_RESET, 0);
+	(void)RREG32(R_000E60_SRBM_SOFT_RESET);
 	WREG32(R_000E60_SRBM_SOFT_RESET, srbm_reset);
 	(void)RREG32(R_000E60_SRBM_SOFT_RESET);
 	udelay(50);
@@ -533,6 +555,17 @@ int r600_gpu_soft_reset(struct radeon_device *rdev)
 	(void)RREG32(R_000E60_SRBM_SOFT_RESET);
 	/* Wait a little for things to settle down */
 	udelay(50);
+	dev_info(rdev->dev, "  R_008010_GRBM_STATUS=0x%08X\n",
+		RREG32(R_008010_GRBM_STATUS));
+	dev_info(rdev->dev, "  R_008014_GRBM_STATUS2=0x%08X\n",
+		RREG32(R_008014_GRBM_STATUS2));
+	dev_info(rdev->dev, "  R_000E50_SRBM_STATUS=0x%08X\n",
+		RREG32(R_000E50_SRBM_STATUS));
+	/* After reset we need to reinit the asic as GPU often endup in an
+	 * incoherent state.
+	 */
+	atom_asic_init(rdev->mode_info.atom_context);
+	rv515_mc_resume(rdev, &save);
 	return 0;
 }
 
@@ -1343,32 +1376,47 @@ int r600_ring_test(struct radeon_device *rdev)
 	return r;
 }
 
-/*
- * Writeback
- */
-int r600_wb_init(struct radeon_device *rdev)
+void r600_wb_disable(struct radeon_device *rdev)
+{
+	WREG32(SCRATCH_UMSK, 0);
+	if (rdev->wb.wb_obj) {
+		radeon_object_kunmap(rdev->wb.wb_obj);
+		radeon_object_unpin(rdev->wb.wb_obj);
+	}
+}
+
+void r600_wb_fini(struct radeon_device *rdev)
+{
+	r600_wb_disable(rdev);
+	if (rdev->wb.wb_obj) {
+		radeon_object_unref(&rdev->wb.wb_obj);
+		rdev->wb.wb = NULL;
+		rdev->wb.wb_obj = NULL;
+	}
+}
+
+int r600_wb_enable(struct radeon_device *rdev)
 {
 	int r;
 
 	if (rdev->wb.wb_obj == NULL) {
-		r = radeon_object_create(rdev, NULL, 4096,
-					 true,
-					 RADEON_GEM_DOMAIN_GTT,
-					 false, &rdev->wb.wb_obj);
+		r = radeon_object_create(rdev, NULL, 4096, true,
+				RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj);
 		if (r) {
-			DRM_ERROR("radeon: failed to create WB buffer (%d).\n", r);
+			dev_warn(rdev->dev, "failed to create WB buffer (%d).\n", r);
 			return r;
 		}
-		r = radeon_object_pin(rdev->wb.wb_obj,
-				      RADEON_GEM_DOMAIN_GTT,
-				      &rdev->wb.gpu_addr);
+		r = radeon_object_pin(rdev->wb.wb_obj, RADEON_GEM_DOMAIN_GTT,
+				&rdev->wb.gpu_addr);
 		if (r) {
-			DRM_ERROR("radeon: failed to pin WB buffer (%d).\n", r);
+			dev_warn(rdev->dev, "failed to pin WB buffer (%d).\n", r);
+			r600_wb_fini(rdev);
 			return r;
 		}
 		r = radeon_object_kmap(rdev->wb.wb_obj, (void **)&rdev->wb.wb);
 		if (r) {
-			DRM_ERROR("radeon: failed to map WB buffer (%d).\n", r);
+			dev_warn(rdev->dev, "failed to map WB buffer (%d).\n", r);
+			r600_wb_fini(rdev);
 			return r;
 		}
 	}
@@ -1379,21 +1427,6 @@ int r600_wb_init(struct radeon_device *rdev)
 	return 0;
 }
 
-void r600_wb_fini(struct radeon_device *rdev)
-{
-	if (rdev->wb.wb_obj) {
-		radeon_object_kunmap(rdev->wb.wb_obj);
-		radeon_object_unpin(rdev->wb.wb_obj);
-		radeon_object_unref(&rdev->wb.wb_obj);
-		rdev->wb.wb = NULL;
-		rdev->wb.wb_obj = NULL;
-	}
-}
-
-
-/*
- * CS
- */
 void r600_fence_ring_emit(struct radeon_device *rdev,
 			  struct radeon_fence *fence)
 {
@@ -1470,11 +1503,14 @@ int r600_startup(struct radeon_device *rdev)
 {
 	int r;
 
-	r600_gpu_reset(rdev);
-	r600_mc_resume(rdev);
-	r = r600_pcie_gart_enable(rdev);
-	if (r)
-		return r;
+	r600_mc_program(rdev);
+	if (rdev->flags & RADEON_IS_AGP) {
+		r600_agp_enable(rdev);
+	} else {
+		r = r600_pcie_gart_enable(rdev);
+		if (r)
+			return r;
+	}
 	r600_gpu_init(rdev);
 
 	r = radeon_object_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
@@ -1493,9 +1529,8 @@ int r600_startup(struct radeon_device *rdev)
 	r = r600_cp_resume(rdev);
 	if (r)
 		return r;
-	r = r600_wb_init(rdev);
-	if (r)
-		return r;
+	/* write back buffer are not vital so don't worry about failure */
+	r600_wb_enable(rdev);
 	return 0;
 }
 
@@ -1517,15 +1552,12 @@ int r600_resume(struct radeon_device *rdev)
 {
 	int r;
 
-	if (radeon_gpu_reset(rdev)) {
-		/* FIXME: what do we want to do here ? */
-	}
+	/* Do not reset GPU before posting, on r600 hw unlike on r500 hw,
+	 * posting will perform necessary task to bring back GPU into good
+	 * shape.
+	 */
 	/* post card */
-	if (rdev->is_atom_bios) {
-		atom_asic_init(rdev->mode_info.atom_context);
-	} else {
-		radeon_combios_asic_init(rdev->ddev);
-	}
+	atom_asic_init(rdev->mode_info.atom_context);
 	/* Initialize clocks */
 	r = radeon_clocks_init(rdev);
 	if (r) {
@@ -1538,7 +1570,7 @@ int r600_resume(struct radeon_device *rdev)
 		return r;
 	}
 
-	r = radeon_ib_test(rdev);
+	r = r600_ib_test(rdev);
 	if (r) {
 		DRM_ERROR("radeon: failled testing IB (%d).\n", r);
 		return r;
@@ -1546,13 +1578,12 @@ int r600_resume(struct radeon_device *rdev)
 	return r;
 }
 
-
 int r600_suspend(struct radeon_device *rdev)
 {
 	/* FIXME: we should wait for ring to be empty */
 	r600_cp_stop(rdev);
 	rdev->cp.ready = false;
-
+	r600_wb_disable(rdev);
 	r600_pcie_gart_disable(rdev);
 	/* unpin shaders bo */
 	radeon_object_unpin(rdev->r600_blit.shader_obj);
@@ -1569,7 +1600,6 @@ int r600_init(struct radeon_device *rdev)
 {
 	int r;
 
-	rdev->new_init_path = true;
 	r = radeon_dummy_page_init(rdev);
 	if (r)
 		return r;
@@ -1586,8 +1616,10 @@ int r600_init(struct radeon_device *rdev)
 			return -EINVAL;
 	}
 	/* Must be an ATOMBIOS */
-	if (!rdev->is_atom_bios)
+	if (!rdev->is_atom_bios) {
+		dev_err(rdev->dev, "Expecting atombios for R600 GPU\n");
 		return -EINVAL;
+	}
 	r = radeon_atombios_init(rdev);
 	if (r)
 		return r;
@@ -1609,15 +1641,8 @@ int r600_init(struct radeon_device *rdev)
 	if (r)
 		return r;
 	r = r600_mc_init(rdev);
-	if (r) {
-		if (rdev->flags & RADEON_IS_AGP) {
-			/* Retry with disabling AGP */
-			r600_fini(rdev);
-			rdev->flags &= ~RADEON_IS_AGP;
-			return r600_init(rdev);
-		}
+	if (r)
 		return r;
-	}
 	/* Memory manager */
 	r = radeon_object_init(rdev);
 	if (r)
@@ -1646,12 +1671,10 @@ int r600_init(struct radeon_device *rdev)
 
 	r = r600_startup(rdev);
 	if (r) {
-		if (rdev->flags & RADEON_IS_AGP) {
-			/* Retry with disabling AGP */
-			r600_fini(rdev);
-			rdev->flags &= ~RADEON_IS_AGP;
-			return r600_init(rdev);
-		}
+		r600_suspend(rdev);
+		r600_wb_fini(rdev);
+		radeon_ring_fini(rdev);
+		r600_pcie_gart_fini(rdev);
 		rdev->accel_working = false;
 	}
 	if (rdev->accel_working) {
@@ -1660,7 +1683,7 @@ int r600_init(struct radeon_device *rdev)
 			DRM_ERROR("radeon: failled initializing IB pool (%d).\n", r);
 			rdev->accel_working = false;
 		}
-		r = radeon_ib_test(rdev);
+		r = r600_ib_test(rdev);
 		if (r) {
 			DRM_ERROR("radeon: failled testing IB (%d).\n", r);
 			rdev->accel_working = false;
@@ -1676,19 +1699,15 @@ void r600_fini(struct radeon_device *rdev)
 
 	r600_blit_fini(rdev);
 	radeon_ring_fini(rdev);
+	r600_wb_fini(rdev);
 	r600_pcie_gart_fini(rdev);
 	radeon_gem_fini(rdev);
 	radeon_fence_driver_fini(rdev);
 	radeon_clocks_fini(rdev);
-#if __OS_HAS_AGP
 	if (rdev->flags & RADEON_IS_AGP)
 		radeon_agp_fini(rdev);
-#endif
 	radeon_object_fini(rdev);
-	if (rdev->is_atom_bios)
-		radeon_atombios_fini(rdev);
-	else
-		radeon_combios_fini(rdev);
+	radeon_atombios_fini(rdev);
 	kfree(rdev->bios);
 	rdev->bios = NULL;
 	radeon_dummy_page_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c
index d988eece0187..dec501081608 100644
--- a/drivers/gpu/drm/radeon/r600_blit.c
+++ b/drivers/gpu/drm/radeon/r600_blit.c
@@ -582,8 +582,6 @@ r600_blit_copy(struct drm_device *dev,
 	u64 vb_addr;
 	u32 *vb;
 
-	vb = r600_nomm_get_vb_ptr(dev);
-
 	if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) {
 		max_bytes = 8192;
 
@@ -619,8 +617,8 @@ r600_blit_copy(struct drm_device *dev,
 				if (!dev_priv->blit_vb)
 					return;
 				set_shaders(dev);
-				vb = r600_nomm_get_vb_ptr(dev);
 			}
+			vb = r600_nomm_get_vb_ptr(dev);
 
 			vb[0] = i2f(dst_x);
 			vb[1] = 0;
@@ -708,8 +706,8 @@ r600_blit_copy(struct drm_device *dev,
 					return;
 
 				set_shaders(dev);
-				vb = r600_nomm_get_vb_ptr(dev);
 			}
+			vb = r600_nomm_get_vb_ptr(dev);
 
 			vb[0] = i2f(dst_x / 4);
 			vb[1] = 0;
@@ -777,8 +775,6 @@ r600_blit_swap(struct drm_device *dev,
 	u64 vb_addr;
 	u32 *vb;
 
-	vb = r600_nomm_get_vb_ptr(dev);
-
 	if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) {
 
 		r600_nomm_put_vb(dev);
@@ -787,8 +783,8 @@ r600_blit_swap(struct drm_device *dev,
 			return;
 
 		set_shaders(dev);
-		vb = r600_nomm_get_vb_ptr(dev);
 	}
+	vb = r600_nomm_get_vb_ptr(dev);
 
 	if (cpp == 4) {
 		cb_format = COLOR_8_8_8_8;
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index acae33e2ad51..93108bb31d1d 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -610,7 +610,6 @@ void r600_kms_blit_copy(struct radeon_device *rdev,
 
 	DRM_DEBUG("emitting copy %16llx %16llx %d %d\n", src_gpu_addr, dst_gpu_addr,
 		  size_bytes, rdev->r600_blit.vb_used);
-	vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
 	if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) {
 		max_bytes = 8192;
 
@@ -653,6 +652,7 @@ void r600_kms_blit_copy(struct radeon_device *rdev,
 				vb = r600_nomm_get_vb_ptr(dev);
 #endif
 			}
+			vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
 
 			vb[0] = i2f(dst_x);
 			vb[1] = 0;
@@ -747,6 +747,7 @@ void r600_kms_blit_copy(struct radeon_device *rdev,
 				vb = r600_nomm_get_vb_ptr(dev);
 			}
 #endif
+			vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
 
 			vb[0] = i2f(dst_x / 4);
 			vb[1] = 0;
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 33b89cd8743e..17e42195c632 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -28,7 +28,6 @@
 #include "drmP.h"
 #include "radeon.h"
 #include "r600d.h"
-#include "avivod.h"
 
 static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
 					struct radeon_cs_reloc **cs_reloc);
@@ -57,7 +56,7 @@ int r600_cs_packet_parse(struct radeon_cs_parser *p,
 			  idx, ib_chunk->length_dw);
 		return -EINVAL;
 	}
-	header = ib_chunk->kdata[idx];
+	header = radeon_get_ib_value(p, idx);
 	pkt->idx = idx;
 	pkt->type = CP_PACKET_GET_TYPE(header);
 	pkt->count = CP_PACKET_GET_COUNT(header);
@@ -98,7 +97,6 @@ int r600_cs_packet_parse(struct radeon_cs_parser *p,
 static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
 					struct radeon_cs_reloc **cs_reloc)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_chunk *relocs_chunk;
 	struct radeon_cs_packet p3reloc;
 	unsigned idx;
@@ -109,7 +107,6 @@ static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
 		return -EINVAL;
 	}
 	*cs_reloc = NULL;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
 	r = r600_cs_packet_parse(p, &p3reloc, p->idx);
 	if (r) {
@@ -121,7 +118,7 @@ static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
 			  p3reloc.idx);
 		return -EINVAL;
 	}
-	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
 	if (idx >= relocs_chunk->length_dw) {
 		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
 			  idx, relocs_chunk->length_dw);
@@ -146,7 +143,6 @@ static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
 static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p,
 					struct radeon_cs_reloc **cs_reloc)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_chunk *relocs_chunk;
 	struct radeon_cs_packet p3reloc;
 	unsigned idx;
@@ -157,7 +153,6 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p,
 		return -EINVAL;
 	}
 	*cs_reloc = NULL;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
 	r = r600_cs_packet_parse(p, &p3reloc, p->idx);
 	if (r) {
@@ -169,7 +164,7 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p,
 			  p3reloc.idx);
 		return -EINVAL;
 	}
-	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
 	if (idx >= relocs_chunk->length_dw) {
 		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
 			  idx, relocs_chunk->length_dw);
@@ -181,13 +176,136 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p,
 	return 0;
 }
 
+/**
+ * r600_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser:		parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET3 - WAIT_REG_MEM poll vline status reg
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT_REG_MEM packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+static int r600_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	struct radeon_crtc *radeon_crtc;
+	struct radeon_cs_packet p3reloc, wait_reg_mem;
+	int crtc_id;
+	int r;
+	uint32_t header, h_idx, reg, wait_reg_mem_info;
+	volatile uint32_t *ib;
+
+	ib = p->ib->ptr;
+
+	/* parse the WAIT_REG_MEM */
+	r = r600_cs_packet_parse(p, &wait_reg_mem, p->idx);
+	if (r)
+		return r;
+
+	/* check its a WAIT_REG_MEM */
+	if (wait_reg_mem.type != PACKET_TYPE3 ||
+	    wait_reg_mem.opcode != PACKET3_WAIT_REG_MEM) {
+		DRM_ERROR("vline wait missing WAIT_REG_MEM segment\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	wait_reg_mem_info = radeon_get_ib_value(p, wait_reg_mem.idx + 1);
+	/* bit 4 is reg (0) or mem (1) */
+	if (wait_reg_mem_info & 0x10) {
+		DRM_ERROR("vline WAIT_REG_MEM waiting on MEM rather than REG\n");
+		r = -EINVAL;
+		return r;
+	}
+	/* waiting for value to be equal */
+	if ((wait_reg_mem_info & 0x7) != 0x3) {
+		DRM_ERROR("vline WAIT_REG_MEM function not equal\n");
+		r = -EINVAL;
+		return r;
+	}
+	if ((radeon_get_ib_value(p, wait_reg_mem.idx + 2) << 2) != AVIVO_D1MODE_VLINE_STATUS) {
+		DRM_ERROR("vline WAIT_REG_MEM bad reg\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	if (radeon_get_ib_value(p, wait_reg_mem.idx + 5) != AVIVO_D1MODE_VLINE_STAT) {
+		DRM_ERROR("vline WAIT_REG_MEM bad bit mask\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	/* jump over the NOP */
+	r = r600_cs_packet_parse(p, &p3reloc, p->idx + wait_reg_mem.count + 2);
+	if (r)
+		return r;
+
+	h_idx = p->idx - 2;
+	p->idx += wait_reg_mem.count + 2;
+	p->idx += p3reloc.count + 2;
+
+	header = radeon_get_ib_value(p, h_idx);
+	crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
+	reg = CP_PACKET0_GET_REG(header);
+	mutex_lock(&p->rdev->ddev->mode_config.mutex);
+	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_ERROR("cannot find crtc %d\n", crtc_id);
+		r = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+	radeon_crtc = to_radeon_crtc(crtc);
+	crtc_id = radeon_crtc->crtc_id;
+
+	if (!crtc->enabled) {
+		/* if the CRTC isn't enabled - we need to nop out the WAIT_REG_MEM */
+		ib[h_idx + 2] = PACKET2(0);
+		ib[h_idx + 3] = PACKET2(0);
+		ib[h_idx + 4] = PACKET2(0);
+		ib[h_idx + 5] = PACKET2(0);
+		ib[h_idx + 6] = PACKET2(0);
+		ib[h_idx + 7] = PACKET2(0);
+		ib[h_idx + 8] = PACKET2(0);
+	} else if (crtc_id == 1) {
+		switch (reg) {
+		case AVIVO_D1MODE_VLINE_START_END:
+			header &= ~R600_CP_PACKET0_REG_MASK;
+			header |= AVIVO_D2MODE_VLINE_START_END >> 2;
+			break;
+		default:
+			DRM_ERROR("unknown crtc reloc\n");
+			r = -EINVAL;
+			goto out;
+		}
+		ib[h_idx] = header;
+		ib[h_idx + 4] = AVIVO_D2MODE_VLINE_STATUS >> 2;
+	}
+out:
+	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+	return r;
+}
+
 static int r600_packet0_check(struct radeon_cs_parser *p,
 				struct radeon_cs_packet *pkt,
 				unsigned idx, unsigned reg)
 {
+	int r;
+
 	switch (reg) {
 	case AVIVO_D1MODE_VLINE_START_END:
-	case AVIVO_D2MODE_VLINE_START_END:
+		r = r600_cs_packet_parse_vline(p);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			return r;
+		}
 		break;
 	default:
 		printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
@@ -218,17 +336,18 @@ static int r600_cs_parse_packet0(struct radeon_cs_parser *p,
 static int r600_packet3_check(struct radeon_cs_parser *p,
 				struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	volatile u32 *ib;
 	unsigned idx;
 	unsigned i;
 	unsigned start_reg, end_reg, reg;
 	int r;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
+	idx_value = radeon_get_ib_value(p, idx);
+
 	switch (pkt->opcode) {
 	case PACKET3_START_3D_CMDBUF:
 		if (p->family >= CHIP_RV770 || pkt->count) {
@@ -259,8 +378,8 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 			DRM_ERROR("bad DRAW_INDEX\n");
 			return -EINVAL;
 		}
-		ib[idx+0] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-		ib[idx+1] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		ib[idx+0] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+		ib[idx+1] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		break;
 	case PACKET3_DRAW_INDEX_AUTO:
 		if (pkt->count != 1) {
@@ -281,14 +400,14 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 			return -EINVAL;
 		}
 		/* bit 4 is reg (0) or mem (1) */
-		if (ib_chunk->kdata[idx+0] & 0x10) {
+		if (idx_value & 0x10) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("bad WAIT_REG_MEM\n");
 				return -EINVAL;
 			}
 			ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-			ib[idx+2] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+			ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		}
 		break;
 	case PACKET3_SURFACE_SYNC:
@@ -297,8 +416,8 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 			return -EINVAL;
 		}
 		/* 0xffffffff/0x0 is flush all cache flag */
-		if (ib_chunk->kdata[idx+1] != 0xffffffff ||
-		    ib_chunk->kdata[idx+2] != 0) {
+		if (radeon_get_ib_value(p, idx + 1) != 0xffffffff ||
+		    radeon_get_ib_value(p, idx + 2) != 0) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("bad SURFACE_SYNC\n");
@@ -319,7 +438,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 				return -EINVAL;
 			}
 			ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-			ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+			ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		}
 		break;
 	case PACKET3_EVENT_WRITE_EOP:
@@ -333,10 +452,10 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 			return -EINVAL;
 		}
 		ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-		ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		break;
 	case PACKET3_SET_CONFIG_REG:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONFIG_REG_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_CONFIG_REG_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_CONFIG_REG_OFFSET) ||
 		    (start_reg >= PACKET3_SET_CONFIG_REG_END) ||
@@ -356,7 +475,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 		}
 		break;
 	case PACKET3_SET_CONTEXT_REG:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONTEXT_REG_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_CONTEXT_REG_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_CONTEXT_REG_OFFSET) ||
 		    (start_reg >= PACKET3_SET_CONTEXT_REG_END) ||
@@ -421,7 +540,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 			DRM_ERROR("bad SET_RESOURCE\n");
 			return -EINVAL;
 		}
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_RESOURCE_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_RESOURCE_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_RESOURCE_OFFSET) ||
 		    (start_reg >= PACKET3_SET_RESOURCE_END) ||
@@ -430,7 +549,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 			return -EINVAL;
 		}
 		for (i = 0; i < (pkt->count / 7); i++) {
-			switch (G__SQ_VTX_CONSTANT_TYPE(ib[idx+(i*7)+6+1])) {
+			switch (G__SQ_VTX_CONSTANT_TYPE(radeon_get_ib_value(p, idx+(i*7)+6+1))) {
 			case SQ_TEX_VTX_VALID_TEXTURE:
 				/* tex base */
 				r = r600_cs_packet_next_reloc(p, &reloc);
@@ -455,7 +574,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 					return -EINVAL;
 				}
 				ib[idx+1+(i*7)+0] += (u32)((reloc->lobj.gpu_offset) & 0xffffffff);
-				ib[idx+1+(i*7)+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+				ib[idx+1+(i*7)+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 				break;
 			case SQ_TEX_VTX_INVALID_TEXTURE:
 			case SQ_TEX_VTX_INVALID_BUFFER:
@@ -466,7 +585,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 		}
 		break;
 	case PACKET3_SET_ALU_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_ALU_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_ALU_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_ALU_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_ALU_CONST_END) ||
@@ -476,7 +595,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 		}
 		break;
 	case PACKET3_SET_BOOL_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_BOOL_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_BOOL_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_BOOL_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_BOOL_CONST_END) ||
@@ -486,7 +605,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 		}
 		break;
 	case PACKET3_SET_LOOP_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_LOOP_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_LOOP_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_LOOP_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_LOOP_CONST_END) ||
@@ -496,7 +615,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 		}
 		break;
 	case PACKET3_SET_CTL_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_CTL_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_CTL_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_CTL_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_CTL_CONST_END) ||
@@ -510,7 +629,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 			DRM_ERROR("bad SET_SAMPLER\n");
 			return -EINVAL;
 		}
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_SAMPLER_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_SAMPLER_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_SAMPLER_OFFSET) ||
 		    (start_reg >= PACKET3_SET_SAMPLER_END) ||
@@ -602,6 +721,8 @@ static void r600_cs_parser_fini(struct radeon_cs_parser *parser, int error)
 	kfree(parser->relocs);
 	for (i = 0; i < parser->nchunks; i++) {
 		kfree(parser->chunks[i].kdata);
+		kfree(parser->chunks[i].kpage[0]);
+		kfree(parser->chunks[i].kpage[1]);
 	}
 	kfree(parser->chunks);
 	kfree(parser->chunks_array);
@@ -639,7 +760,6 @@ int r600_cs_legacy(struct drm_device *dev, void *data, struct drm_file *filp,
 	 * uncached). */
 	ib_chunk = &parser.chunks[parser.chunk_ib_idx];
 	parser.ib->length_dw = ib_chunk->length_dw;
-	memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4);
 	*l = parser.ib->length_dw;
 	r = r600_cs_parse(&parser);
 	if (r) {
@@ -647,6 +767,12 @@ int r600_cs_legacy(struct drm_device *dev, void *data, struct drm_file *filp,
 		r600_cs_parser_fini(&parser, r);
 		return r;
 	}
+	r = radeon_cs_finish_pages(&parser);
+	if (r) {
+		DRM_ERROR("Invalid command stream !\n");
+		r600_cs_parser_fini(&parser, r);
+		return r;
+	}
 	r600_cs_parser_fini(&parser, r);
 	return r;
 }
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 4a9028a85c9b..9b64d47f1f82 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -643,6 +643,7 @@
 #define		G_000E50_MCDW_BUSY(x)			(((x) >> 13) & 1)
 #define		G_000E50_SEM_BUSY(x)			(((x) >> 14) & 1)
 #define		G_000E50_RLC_BUSY(x)			(((x) >> 15) & 1)
+#define		G_000E50_BIF_BUSY(x)			(((x) >> 29) & 1)
 #define	R_000E60_SRBM_SOFT_RESET			0x0E60
 #define		S_000E60_SOFT_RESET_BIF(x)		(((x) & 1) << 1)
 #define		S_000E60_SOFT_RESET_CG(x)		(((x) & 1) << 2)
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 6311b1362594..5ab35b81c86b 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -44,6 +44,24 @@
  *	- TESTING, TESTING, TESTING
  */
 
+/* Initialization path:
+ *  We expect that acceleration initialization might fail for various
+ *  reasons even thought we work hard to make it works on most
+ *  configurations. In order to still have a working userspace in such
+ *  situation the init path must succeed up to the memory controller
+ *  initialization point. Failure before this point are considered as
+ *  fatal error. Here is the init callchain :
+ *      radeon_device_init  perform common structure, mutex initialization
+ *      asic_init           setup the GPU memory layout and perform all
+ *                          one time initialization (failure in this
+ *                          function are considered fatal)
+ *      asic_startup        setup the GPU acceleration, in order to
+ *                          follow guideline the first thing this
+ *                          function should do is setting the GPU
+ *                          memory controller (only MC setup failure
+ *                          are considered as fatal)
+ */
+
 #include <asm/atomic.h>
 #include <linux/wait.h>
 #include <linux/list.h>
@@ -342,7 +360,7 @@ struct radeon_ib {
 	unsigned long		idx;
 	uint64_t		gpu_addr;
 	struct radeon_fence	*fence;
-	volatile uint32_t	*ptr;
+	uint32_t	*ptr;
 	uint32_t		length_dw;
 };
 
@@ -415,7 +433,12 @@ struct radeon_cs_reloc {
 struct radeon_cs_chunk {
 	uint32_t		chunk_id;
 	uint32_t		length_dw;
+	int kpage_idx[2];
+	uint32_t                *kpage[2];
 	uint32_t		*kdata;
+	void __user *user_ptr;
+	int last_copied_page;
+	int last_page_index;
 };
 
 struct radeon_cs_parser {
@@ -438,8 +461,38 @@ struct radeon_cs_parser {
 	struct radeon_ib	*ib;
 	void			*track;
 	unsigned		family;
+	int parser_error;
 };
 
+extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx);
+extern int radeon_cs_finish_pages(struct radeon_cs_parser *p);
+
+
+static inline u32 radeon_get_ib_value(struct radeon_cs_parser *p, int idx)
+{
+	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+	u32 pg_idx, pg_offset;
+	u32 idx_value = 0;
+	int new_page;
+
+	pg_idx = (idx * 4) / PAGE_SIZE;
+	pg_offset = (idx * 4) % PAGE_SIZE;
+
+	if (ibc->kpage_idx[0] == pg_idx)
+		return ibc->kpage[0][pg_offset/4];
+	if (ibc->kpage_idx[1] == pg_idx)
+		return ibc->kpage[1][pg_offset/4];
+
+	new_page = radeon_cs_update_pages(p, pg_idx);
+	if (new_page < 0) {
+		p->parser_error = new_page;
+		return 0;
+	}
+
+	idx_value = ibc->kpage[new_page][pg_offset/4];
+	return idx_value;
+}
+
 struct radeon_cs_packet {
 	unsigned	idx;
 	unsigned	type;
@@ -537,18 +590,8 @@ struct radeon_asic {
 	void (*fini)(struct radeon_device *rdev);
 	int (*resume)(struct radeon_device *rdev);
 	int (*suspend)(struct radeon_device *rdev);
-	void (*errata)(struct radeon_device *rdev);
-	void (*vram_info)(struct radeon_device *rdev);
 	void (*vga_set_state)(struct radeon_device *rdev, bool state);
 	int (*gpu_reset)(struct radeon_device *rdev);
-	int (*mc_init)(struct radeon_device *rdev);
-	void (*mc_fini)(struct radeon_device *rdev);
-	int (*wb_init)(struct radeon_device *rdev);
-	void (*wb_fini)(struct radeon_device *rdev);
-	int (*gart_init)(struct radeon_device *rdev);
-	void (*gart_fini)(struct radeon_device *rdev);
-	int (*gart_enable)(struct radeon_device *rdev);
-	void (*gart_disable)(struct radeon_device *rdev);
 	void (*gart_tlb_flush)(struct radeon_device *rdev);
 	int (*gart_set_page)(struct radeon_device *rdev, int i, uint64_t addr);
 	int (*cp_init)(struct radeon_device *rdev, unsigned ring_size);
@@ -558,7 +601,6 @@ struct radeon_asic {
 	void (*ring_start)(struct radeon_device *rdev);
 	int (*ring_test)(struct radeon_device *rdev);
 	void (*ring_ib_execute)(struct radeon_device *rdev, struct radeon_ib *ib);
-	int (*ib_test)(struct radeon_device *rdev);
 	int (*irq_set)(struct radeon_device *rdev);
 	int (*irq_process)(struct radeon_device *rdev);
 	u32 (*get_vblank_counter)(struct radeon_device *rdev, int crtc);
@@ -736,7 +778,6 @@ struct radeon_device {
 	bool				shutdown;
 	bool				suspend;
 	bool				need_dma32;
-	bool				new_init_path;
 	bool				accel_working;
 	struct radeon_surface_reg surface_regs[RADEON_GEM_MAX_SURFACES];
 	const struct firmware *me_fw;	/* all family ME firmware */
@@ -896,28 +937,14 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
 #define radeon_resume(rdev) (rdev)->asic->resume((rdev))
 #define radeon_suspend(rdev) (rdev)->asic->suspend((rdev))
 #define radeon_cs_parse(p) rdev->asic->cs_parse((p))
-#define radeon_errata(rdev) (rdev)->asic->errata((rdev))
-#define radeon_vram_info(rdev) (rdev)->asic->vram_info((rdev))
 #define radeon_vga_set_state(rdev, state) (rdev)->asic->vga_set_state((rdev), (state))
 #define radeon_gpu_reset(rdev) (rdev)->asic->gpu_reset((rdev))
-#define radeon_mc_init(rdev) (rdev)->asic->mc_init((rdev))
-#define radeon_mc_fini(rdev) (rdev)->asic->mc_fini((rdev))
-#define radeon_wb_init(rdev) (rdev)->asic->wb_init((rdev))
-#define radeon_wb_fini(rdev) (rdev)->asic->wb_fini((rdev))
-#define radeon_gpu_gart_init(rdev) (rdev)->asic->gart_init((rdev))
-#define radeon_gpu_gart_fini(rdev) (rdev)->asic->gart_fini((rdev))
-#define radeon_gart_enable(rdev) (rdev)->asic->gart_enable((rdev))
-#define radeon_gart_disable(rdev) (rdev)->asic->gart_disable((rdev))
 #define radeon_gart_tlb_flush(rdev) (rdev)->asic->gart_tlb_flush((rdev))
 #define radeon_gart_set_page(rdev, i, p) (rdev)->asic->gart_set_page((rdev), (i), (p))
-#define radeon_cp_init(rdev,rsize) (rdev)->asic->cp_init((rdev), (rsize))
-#define radeon_cp_fini(rdev) (rdev)->asic->cp_fini((rdev))
-#define radeon_cp_disable(rdev) (rdev)->asic->cp_disable((rdev))
 #define radeon_cp_commit(rdev) (rdev)->asic->cp_commit((rdev))
 #define radeon_ring_start(rdev) (rdev)->asic->ring_start((rdev))
 #define radeon_ring_test(rdev) (rdev)->asic->ring_test((rdev))
 #define radeon_ring_ib_execute(rdev, ib) (rdev)->asic->ring_ib_execute((rdev), (ib))
-#define radeon_ib_test(rdev) (rdev)->asic->ib_test((rdev))
 #define radeon_irq_set(rdev) (rdev)->asic->irq_set((rdev))
 #define radeon_irq_process(rdev) (rdev)->asic->irq_process((rdev))
 #define radeon_get_vblank_counter(rdev, crtc) (rdev)->asic->get_vblank_counter((rdev), (crtc))
@@ -943,6 +970,8 @@ extern void radeon_clocks_fini(struct radeon_device *rdev);
 extern void radeon_scratch_init(struct radeon_device *rdev);
 extern void radeon_surface_init(struct radeon_device *rdev);
 extern int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data);
+extern void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable);
+extern void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable);
 
 /* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280 */
 struct r100_mc_save {
@@ -974,23 +1003,71 @@ extern void r100_vram_init_sizes(struct radeon_device *rdev);
 extern void r100_wb_disable(struct radeon_device *rdev);
 extern void r100_wb_fini(struct radeon_device *rdev);
 extern int r100_wb_init(struct radeon_device *rdev);
+extern void r100_hdp_reset(struct radeon_device *rdev);
+extern int r100_rb2d_reset(struct radeon_device *rdev);
+extern int r100_cp_reset(struct radeon_device *rdev);
+extern void r100_vga_render_disable(struct radeon_device *rdev);
+extern int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
+						struct radeon_cs_packet *pkt,
+						struct radeon_object *robj);
+extern int r100_cs_parse_packet0(struct radeon_cs_parser *p,
+				struct radeon_cs_packet *pkt,
+				const unsigned *auth, unsigned n,
+				radeon_packet0_check_t check);
+extern int r100_cs_packet_parse(struct radeon_cs_parser *p,
+				struct radeon_cs_packet *pkt,
+				unsigned idx);
+
+/* rv200,rv250,rv280 */
+extern void r200_set_safe_registers(struct radeon_device *rdev);
 
 /* r300,r350,rv350,rv370,rv380 */
 extern void r300_set_reg_safe(struct radeon_device *rdev);
 extern void r300_mc_program(struct radeon_device *rdev);
 extern void r300_vram_info(struct radeon_device *rdev);
+extern void r300_clock_startup(struct radeon_device *rdev);
+extern int r300_mc_wait_for_idle(struct radeon_device *rdev);
 extern int rv370_pcie_gart_init(struct radeon_device *rdev);
 extern void rv370_pcie_gart_fini(struct radeon_device *rdev);
 extern int rv370_pcie_gart_enable(struct radeon_device *rdev);
 extern void rv370_pcie_gart_disable(struct radeon_device *rdev);
 
 /* r420,r423,rv410 */
+extern int r420_mc_init(struct radeon_device *rdev);
 extern u32 r420_mc_rreg(struct radeon_device *rdev, u32 reg);
 extern void r420_mc_wreg(struct radeon_device *rdev, u32 reg, u32 v);
 extern int r420_debugfs_pipes_info_init(struct radeon_device *rdev);
+extern void r420_pipes_init(struct radeon_device *rdev);
 
 /* rv515 */
+struct rv515_mc_save {
+	u32 d1vga_control;
+	u32 d2vga_control;
+	u32 vga_render_control;
+	u32 vga_hdp_control;
+	u32 d1crtc_control;
+	u32 d2crtc_control;
+};
 extern void rv515_bandwidth_avivo_update(struct radeon_device *rdev);
+extern void rv515_vga_render_disable(struct radeon_device *rdev);
+extern void rv515_set_safe_registers(struct radeon_device *rdev);
+extern void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save);
+extern void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save);
+extern void rv515_clock_startup(struct radeon_device *rdev);
+extern void rv515_debugfs(struct radeon_device *rdev);
+extern int rv515_suspend(struct radeon_device *rdev);
+
+/* rs400 */
+extern int rs400_gart_init(struct radeon_device *rdev);
+extern int rs400_gart_enable(struct radeon_device *rdev);
+extern void rs400_gart_adjust_size(struct radeon_device *rdev);
+extern void rs400_gart_disable(struct radeon_device *rdev);
+extern void rs400_gart_fini(struct radeon_device *rdev);
+
+/* rs600 */
+extern void rs600_set_safe_registers(struct radeon_device *rdev);
+extern int rs600_irq_set(struct radeon_device *rdev);
+extern void rs600_irq_disable(struct radeon_device *rdev);
 
 /* rs690, rs740 */
 extern void rs690_line_buffer_adjust(struct radeon_device *rdev,
@@ -1009,8 +1086,9 @@ extern int r600_pcie_gart_init(struct radeon_device *rdev);
 extern void r600_pcie_gart_tlb_flush(struct radeon_device *rdev);
 extern int r600_ib_test(struct radeon_device *rdev);
 extern int r600_ring_test(struct radeon_device *rdev);
-extern int r600_wb_init(struct radeon_device *rdev);
 extern void r600_wb_fini(struct radeon_device *rdev);
+extern int r600_wb_enable(struct radeon_device *rdev);
+extern void r600_wb_disable(struct radeon_device *rdev);
 extern void r600_scratch_init(struct radeon_device *rdev);
 extern int r600_blit_init(struct radeon_device *rdev);
 extern void r600_blit_fini(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 8968f78fa1e3..c3532c7a6f3f 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -41,28 +41,17 @@ void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable);
 /*
  * r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280
  */
-int r100_init(struct radeon_device *rdev);
-int r200_init(struct radeon_device *rdev);
+extern int r100_init(struct radeon_device *rdev);
+extern void r100_fini(struct radeon_device *rdev);
+extern int r100_suspend(struct radeon_device *rdev);
+extern int r100_resume(struct radeon_device *rdev);
 uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg);
 void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
-void r100_errata(struct radeon_device *rdev);
-void r100_vram_info(struct radeon_device *rdev);
 void r100_vga_set_state(struct radeon_device *rdev, bool state);
 int r100_gpu_reset(struct radeon_device *rdev);
-int r100_mc_init(struct radeon_device *rdev);
-void r100_mc_fini(struct radeon_device *rdev);
 u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc);
-int r100_wb_init(struct radeon_device *rdev);
-void r100_wb_fini(struct radeon_device *rdev);
-int r100_pci_gart_init(struct radeon_device *rdev);
-void r100_pci_gart_fini(struct radeon_device *rdev);
-int r100_pci_gart_enable(struct radeon_device *rdev);
-void r100_pci_gart_disable(struct radeon_device *rdev);
 void r100_pci_gart_tlb_flush(struct radeon_device *rdev);
 int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
-int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
-void r100_cp_fini(struct radeon_device *rdev);
-void r100_cp_disable(struct radeon_device *rdev);
 void r100_cp_commit(struct radeon_device *rdev);
 void r100_ring_start(struct radeon_device *rdev);
 int r100_irq_set(struct radeon_device *rdev);
@@ -83,33 +72,21 @@ int r100_set_surface_reg(struct radeon_device *rdev, int reg,
 int r100_clear_surface_reg(struct radeon_device *rdev, int reg);
 void r100_bandwidth_update(struct radeon_device *rdev);
 void r100_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
-int r100_ib_test(struct radeon_device *rdev);
 int r100_ring_test(struct radeon_device *rdev);
 
 static struct radeon_asic r100_asic = {
 	.init = &r100_init,
-	.errata = &r100_errata,
-	.vram_info = &r100_vram_info,
+	.fini = &r100_fini,
+	.suspend = &r100_suspend,
+	.resume = &r100_resume,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &r100_gpu_reset,
-	.mc_init = &r100_mc_init,
-	.mc_fini = &r100_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
-	.gart_init = &r100_pci_gart_init,
-	.gart_fini = &r100_pci_gart_fini,
-	.gart_enable = &r100_pci_gart_enable,
-	.gart_disable = &r100_pci_gart_disable,
 	.gart_tlb_flush = &r100_pci_gart_tlb_flush,
 	.gart_set_page = &r100_pci_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &r100_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
 	.get_vblank_counter = &r100_get_vblank_counter,
@@ -131,55 +108,38 @@ static struct radeon_asic r100_asic = {
 /*
  * r300,r350,rv350,rv380
  */
-int r300_init(struct radeon_device *rdev);
-void r300_errata(struct radeon_device *rdev);
-void r300_vram_info(struct radeon_device *rdev);
-int r300_gpu_reset(struct radeon_device *rdev);
-int r300_mc_init(struct radeon_device *rdev);
-void r300_mc_fini(struct radeon_device *rdev);
-void r300_ring_start(struct radeon_device *rdev);
-void r300_fence_ring_emit(struct radeon_device *rdev,
-			  struct radeon_fence *fence);
-int r300_cs_parse(struct radeon_cs_parser *p);
-int rv370_pcie_gart_init(struct radeon_device *rdev);
-void rv370_pcie_gart_fini(struct radeon_device *rdev);
-int rv370_pcie_gart_enable(struct radeon_device *rdev);
-void rv370_pcie_gart_disable(struct radeon_device *rdev);
-void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev);
-int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
-uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
-void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
-void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes);
-int r300_copy_dma(struct radeon_device *rdev,
-		  uint64_t src_offset,
-		  uint64_t dst_offset,
-		  unsigned num_pages,
-		  struct radeon_fence *fence);
-
+extern int r300_init(struct radeon_device *rdev);
+extern void r300_fini(struct radeon_device *rdev);
+extern int r300_suspend(struct radeon_device *rdev);
+extern int r300_resume(struct radeon_device *rdev);
+extern int r300_gpu_reset(struct radeon_device *rdev);
+extern void r300_ring_start(struct radeon_device *rdev);
+extern void r300_fence_ring_emit(struct radeon_device *rdev,
+				struct radeon_fence *fence);
+extern int r300_cs_parse(struct radeon_cs_parser *p);
+extern void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev);
+extern int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
+extern uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
+extern void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+extern void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes);
+extern int r300_copy_dma(struct radeon_device *rdev,
+			uint64_t src_offset,
+			uint64_t dst_offset,
+			unsigned num_pages,
+			struct radeon_fence *fence);
 static struct radeon_asic r300_asic = {
 	.init = &r300_init,
-	.errata = &r300_errata,
-	.vram_info = &r300_vram_info,
+	.fini = &r300_fini,
+	.suspend = &r300_suspend,
+	.resume = &r300_resume,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &r300_gpu_reset,
-	.mc_init = &r300_mc_init,
-	.mc_fini = &r300_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
-	.gart_init = &r100_pci_gart_init,
-	.gart_fini = &r100_pci_gart_fini,
-	.gart_enable = &r100_pci_gart_enable,
-	.gart_disable = &r100_pci_gart_disable,
 	.gart_tlb_flush = &r100_pci_gart_tlb_flush,
 	.gart_set_page = &r100_pci_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &r300_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
 	.get_vblank_counter = &r100_get_vblank_counter,
@@ -209,26 +169,14 @@ static struct radeon_asic r420_asic = {
 	.fini = &r420_fini,
 	.suspend = &r420_suspend,
 	.resume = &r420_resume,
-	.errata = NULL,
-	.vram_info = NULL,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &r300_gpu_reset,
-	.mc_init = NULL,
-	.mc_fini = NULL,
-	.wb_init = NULL,
-	.wb_fini = NULL,
-	.gart_enable = NULL,
-	.gart_disable = NULL,
 	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
 	.gart_set_page = &rv370_pcie_gart_set_page,
-	.cp_init = NULL,
-	.cp_fini = NULL,
-	.cp_disable = NULL,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &r300_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = NULL,
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
 	.get_vblank_counter = &r100_get_vblank_counter,
@@ -250,42 +198,27 @@ static struct radeon_asic r420_asic = {
 /*
  * rs400,rs480
  */
-void rs400_errata(struct radeon_device *rdev);
-void rs400_vram_info(struct radeon_device *rdev);
-int rs400_mc_init(struct radeon_device *rdev);
-void rs400_mc_fini(struct radeon_device *rdev);
-int rs400_gart_init(struct radeon_device *rdev);
-void rs400_gart_fini(struct radeon_device *rdev);
-int rs400_gart_enable(struct radeon_device *rdev);
-void rs400_gart_disable(struct radeon_device *rdev);
+extern int rs400_init(struct radeon_device *rdev);
+extern void rs400_fini(struct radeon_device *rdev);
+extern int rs400_suspend(struct radeon_device *rdev);
+extern int rs400_resume(struct radeon_device *rdev);
 void rs400_gart_tlb_flush(struct radeon_device *rdev);
 int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
 uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs400_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 static struct radeon_asic rs400_asic = {
-	.init = &r300_init,
-	.errata = &rs400_errata,
-	.vram_info = &rs400_vram_info,
+	.init = &rs400_init,
+	.fini = &rs400_fini,
+	.suspend = &rs400_suspend,
+	.resume = &rs400_resume,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &r300_gpu_reset,
-	.mc_init = &rs400_mc_init,
-	.mc_fini = &rs400_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
-	.gart_init = &rs400_gart_init,
-	.gart_fini = &rs400_gart_fini,
-	.gart_enable = &rs400_gart_enable,
-	.gart_disable = &rs400_gart_disable,
 	.gart_tlb_flush = &rs400_gart_tlb_flush,
 	.gart_set_page = &rs400_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &r300_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
 	.get_vblank_counter = &r100_get_vblank_counter,
@@ -307,18 +240,13 @@ static struct radeon_asic rs400_asic = {
 /*
  * rs600.
  */
-int rs600_init(struct radeon_device *rdev);
-void rs600_errata(struct radeon_device *rdev);
-void rs600_vram_info(struct radeon_device *rdev);
-int rs600_mc_init(struct radeon_device *rdev);
-void rs600_mc_fini(struct radeon_device *rdev);
+extern int rs600_init(struct radeon_device *rdev);
+extern void rs600_fini(struct radeon_device *rdev);
+extern int rs600_suspend(struct radeon_device *rdev);
+extern int rs600_resume(struct radeon_device *rdev);
 int rs600_irq_set(struct radeon_device *rdev);
 int rs600_irq_process(struct radeon_device *rdev);
 u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc);
-int rs600_gart_init(struct radeon_device *rdev);
-void rs600_gart_fini(struct radeon_device *rdev);
-int rs600_gart_enable(struct radeon_device *rdev);
-void rs600_gart_disable(struct radeon_device *rdev);
 void rs600_gart_tlb_flush(struct radeon_device *rdev);
 int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
 uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg);
@@ -326,28 +254,17 @@ void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rs600_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rs600_asic = {
 	.init = &rs600_init,
-	.errata = &rs600_errata,
-	.vram_info = &rs600_vram_info,
+	.fini = &rs600_fini,
+	.suspend = &rs600_suspend,
+	.resume = &rs600_resume,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &r300_gpu_reset,
-	.mc_init = &rs600_mc_init,
-	.mc_fini = &rs600_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
-	.gart_init = &rs600_gart_init,
-	.gart_fini = &rs600_gart_fini,
-	.gart_enable = &rs600_gart_enable,
-	.gart_disable = &rs600_gart_disable,
 	.gart_tlb_flush = &rs600_gart_tlb_flush,
 	.gart_set_page = &rs600_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &r300_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
 	.irq_set = &rs600_irq_set,
 	.irq_process = &rs600_irq_process,
 	.get_vblank_counter = &rs600_get_vblank_counter,
@@ -367,37 +284,26 @@ static struct radeon_asic rs600_asic = {
 /*
  * rs690,rs740
  */
-void rs690_errata(struct radeon_device *rdev);
-void rs690_vram_info(struct radeon_device *rdev);
-int rs690_mc_init(struct radeon_device *rdev);
-void rs690_mc_fini(struct radeon_device *rdev);
+int rs690_init(struct radeon_device *rdev);
+void rs690_fini(struct radeon_device *rdev);
+int rs690_resume(struct radeon_device *rdev);
+int rs690_suspend(struct radeon_device *rdev);
 uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rs690_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rs690_asic = {
-	.init = &rs600_init,
-	.errata = &rs690_errata,
-	.vram_info = &rs690_vram_info,
+	.init = &rs690_init,
+	.fini = &rs690_fini,
+	.suspend = &rs690_suspend,
+	.resume = &rs690_resume,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &r300_gpu_reset,
-	.mc_init = &rs690_mc_init,
-	.mc_fini = &rs690_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
-	.gart_init = &rs400_gart_init,
-	.gart_fini = &rs400_gart_fini,
-	.gart_enable = &rs400_gart_enable,
-	.gart_disable = &rs400_gart_disable,
 	.gart_tlb_flush = &rs400_gart_tlb_flush,
 	.gart_set_page = &rs400_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &r300_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
 	.irq_set = &rs600_irq_set,
 	.irq_process = &rs600_irq_process,
 	.get_vblank_counter = &rs600_get_vblank_counter,
@@ -420,41 +326,29 @@ static struct radeon_asic rs690_asic = {
  * rv515
  */
 int rv515_init(struct radeon_device *rdev);
-void rv515_errata(struct radeon_device *rdev);
-void rv515_vram_info(struct radeon_device *rdev);
+void rv515_fini(struct radeon_device *rdev);
 int rv515_gpu_reset(struct radeon_device *rdev);
-int rv515_mc_init(struct radeon_device *rdev);
-void rv515_mc_fini(struct radeon_device *rdev);
 uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rv515_ring_start(struct radeon_device *rdev);
 uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rv515_bandwidth_update(struct radeon_device *rdev);
+int rv515_resume(struct radeon_device *rdev);
+int rv515_suspend(struct radeon_device *rdev);
 static struct radeon_asic rv515_asic = {
 	.init = &rv515_init,
-	.errata = &rv515_errata,
-	.vram_info = &rv515_vram_info,
+	.fini = &rv515_fini,
+	.suspend = &rv515_suspend,
+	.resume = &rv515_resume,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &rv515_gpu_reset,
-	.mc_init = &rv515_mc_init,
-	.mc_fini = &rv515_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
-	.gart_init = &rv370_pcie_gart_init,
-	.gart_fini = &rv370_pcie_gart_fini,
-	.gart_enable = &rv370_pcie_gart_enable,
-	.gart_disable = &rv370_pcie_gart_disable,
 	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
 	.gart_set_page = &rv370_pcie_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &rv515_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
 	.irq_set = &rs600_irq_set,
 	.irq_process = &rs600_irq_process,
 	.get_vblank_counter = &rs600_get_vblank_counter,
@@ -476,35 +370,21 @@ static struct radeon_asic rv515_asic = {
 /*
  * r520,rv530,rv560,rv570,r580
  */
-void r520_errata(struct radeon_device *rdev);
-void r520_vram_info(struct radeon_device *rdev);
-int r520_mc_init(struct radeon_device *rdev);
-void r520_mc_fini(struct radeon_device *rdev);
-void r520_bandwidth_update(struct radeon_device *rdev);
+int r520_init(struct radeon_device *rdev);
+int r520_resume(struct radeon_device *rdev);
 static struct radeon_asic r520_asic = {
-	.init = &rv515_init,
-	.errata = &r520_errata,
-	.vram_info = &r520_vram_info,
+	.init = &r520_init,
+	.fini = &rv515_fini,
+	.suspend = &rv515_suspend,
+	.resume = &r520_resume,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &rv515_gpu_reset,
-	.mc_init = &r520_mc_init,
-	.mc_fini = &r520_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
-	.gart_init = &rv370_pcie_gart_init,
-	.gart_fini = &rv370_pcie_gart_fini,
-	.gart_enable = &rv370_pcie_gart_enable,
-	.gart_disable = &rv370_pcie_gart_disable,
 	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
 	.gart_set_page = &rv370_pcie_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &rv515_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
 	.irq_set = &rs600_irq_set,
 	.irq_process = &rs600_irq_process,
 	.get_vblank_counter = &rs600_get_vblank_counter,
@@ -519,7 +399,7 @@ static struct radeon_asic r520_asic = {
 	.set_clock_gating = &radeon_atom_set_clock_gating,
 	.set_surface_reg = r100_set_surface_reg,
 	.clear_surface_reg = r100_clear_surface_reg,
-	.bandwidth_update = &r520_bandwidth_update,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 /*
@@ -552,37 +432,23 @@ int r600_set_surface_reg(struct radeon_device *rdev, int reg,
 			 uint32_t offset, uint32_t obj_size);
 int r600_clear_surface_reg(struct radeon_device *rdev, int reg);
 void r600_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
-int r600_ib_test(struct radeon_device *rdev);
 int r600_ring_test(struct radeon_device *rdev);
 int r600_copy_blit(struct radeon_device *rdev,
 		   uint64_t src_offset, uint64_t dst_offset,
 		   unsigned num_pages, struct radeon_fence *fence);
 
 static struct radeon_asic r600_asic = {
-	.errata = NULL,
 	.init = &r600_init,
 	.fini = &r600_fini,
 	.suspend = &r600_suspend,
 	.resume = &r600_resume,
 	.cp_commit = &r600_cp_commit,
-	.vram_info = NULL,
 	.vga_set_state = &r600_vga_set_state,
 	.gpu_reset = &r600_gpu_reset,
-	.mc_init = NULL,
-	.mc_fini = NULL,
-	.wb_init = &r600_wb_init,
-	.wb_fini = &r600_wb_fini,
-	.gart_enable = NULL,
-	.gart_disable = NULL,
 	.gart_tlb_flush = &r600_pcie_gart_tlb_flush,
 	.gart_set_page = &rs600_gart_set_page,
-	.cp_init = NULL,
-	.cp_fini = NULL,
-	.cp_disable = NULL,
-	.ring_start = NULL,
 	.ring_test = &r600_ring_test,
 	.ring_ib_execute = &r600_ring_ib_execute,
-	.ib_test = &r600_ib_test,
 	.irq_set = &r600_irq_set,
 	.irq_process = &r600_irq_process,
 	.fence_ring_emit = &r600_fence_ring_emit,
@@ -596,7 +462,7 @@ static struct radeon_asic r600_asic = {
 	.set_clock_gating = &radeon_atom_set_clock_gating,
 	.set_surface_reg = r600_set_surface_reg,
 	.clear_surface_reg = r600_clear_surface_reg,
-	.bandwidth_update = &r520_bandwidth_update,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 /*
@@ -609,30 +475,17 @@ int rv770_resume(struct radeon_device *rdev);
 int rv770_gpu_reset(struct radeon_device *rdev);
 
 static struct radeon_asic rv770_asic = {
-	.errata = NULL,
 	.init = &rv770_init,
 	.fini = &rv770_fini,
 	.suspend = &rv770_suspend,
 	.resume = &rv770_resume,
 	.cp_commit = &r600_cp_commit,
-	.vram_info = NULL,
 	.gpu_reset = &rv770_gpu_reset,
 	.vga_set_state = &r600_vga_set_state,
-	.mc_init = NULL,
-	.mc_fini = NULL,
-	.wb_init = &r600_wb_init,
-	.wb_fini = &r600_wb_fini,
-	.gart_enable = NULL,
-	.gart_disable = NULL,
 	.gart_tlb_flush = &r600_pcie_gart_tlb_flush,
 	.gart_set_page = &rs600_gart_set_page,
-	.cp_init = NULL,
-	.cp_fini = NULL,
-	.cp_disable = NULL,
-	.ring_start = NULL,
 	.ring_test = &r600_ring_test,
 	.ring_ib_execute = &r600_ring_ib_execute,
-	.ib_test = &r600_ib_test,
 	.irq_set = &r600_irq_set,
 	.irq_process = &r600_irq_process,
 	.fence_ring_emit = &r600_fence_ring_emit,
@@ -646,7 +499,7 @@ static struct radeon_asic rv770_asic = {
 	.set_clock_gating = &radeon_atom_set_clock_gating,
 	.set_surface_reg = r600_set_surface_reg,
 	.clear_surface_reg = r600_clear_surface_reg,
-	.bandwidth_update = &r520_bandwidth_update,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 743742128307..5b6c08cee40e 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -272,12 +272,9 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 			    (le16_to_cpu(path->usConnObjectId) &
 			     OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
 
-			if ((le16_to_cpu(path->usDeviceTag) ==
-			     ATOM_DEVICE_TV1_SUPPORT)
-			    || (le16_to_cpu(path->usDeviceTag) ==
-				ATOM_DEVICE_TV2_SUPPORT)
-			    || (le16_to_cpu(path->usDeviceTag) ==
-				ATOM_DEVICE_CV_SUPPORT))
+			/* TODO CV support */
+			if (le16_to_cpu(path->usDeviceTag) ==
+				ATOM_DEVICE_CV_SUPPORT)
 				continue;
 
 			if ((rdev->family == CHIP_RS780) &&
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 96e37a6e7ce4..34a9b9119518 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -33,12 +33,50 @@
 /*
  * BIOS.
  */
+
+/* If you boot an IGP board with a discrete card as the primary,
+ * the IGP rom is not accessible via the rom bar as the IGP rom is
+ * part of the system bios.  On boot, the system bios puts a
+ * copy of the igp rom at the start of vram if a discrete card is
+ * present.
+ */
+static bool igp_read_bios_from_vram(struct radeon_device *rdev)
+{
+	uint8_t __iomem *bios;
+	resource_size_t vram_base;
+	resource_size_t size = 256 * 1024; /* ??? */
+
+	rdev->bios = NULL;
+	vram_base = drm_get_resource_start(rdev->ddev, 0);
+	bios = ioremap(vram_base, size);
+	if (!bios) {
+		DRM_ERROR("Unable to mmap vram\n");
+		return false;
+	}
+
+	if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
+		iounmap(bios);
+		DRM_ERROR("bad rom signature\n");
+		return false;
+	}
+	rdev->bios = kmalloc(size, GFP_KERNEL);
+	if (rdev->bios == NULL) {
+		iounmap(bios);
+		DRM_ERROR("kmalloc failed\n");
+		return false;
+	}
+	memcpy(rdev->bios, bios, size);
+	iounmap(bios);
+	return true;
+}
+
 static bool radeon_read_bios(struct radeon_device *rdev)
 {
 	uint8_t __iomem *bios;
 	size_t size;
 
 	rdev->bios = NULL;
+	/* XXX: some cards may return 0 for rom size? ddx has a workaround */
 	bios = pci_map_rom(rdev->pdev, &size);
 	if (!bios) {
 		return false;
@@ -341,7 +379,9 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev)
 
 static bool radeon_read_disabled_bios(struct radeon_device *rdev)
 {
-	if (rdev->family >= CHIP_RV770)
+	if (rdev->flags & RADEON_IS_IGP)
+		return igp_read_bios_from_vram(rdev);
+	else if (rdev->family >= CHIP_RV770)
 		return r700_read_disabled_bios(rdev);
 	else if (rdev->family >= CHIP_R600)
 		return r600_read_disabled_bios(rdev);
@@ -356,7 +396,12 @@ bool radeon_get_bios(struct radeon_device *rdev)
 	bool r;
 	uint16_t tmp;
 
-	r = radeon_read_bios(rdev);
+	if (rdev->flags & RADEON_IS_IGP) {
+		r = igp_read_bios_from_vram(rdev);
+		if (r == false)
+			r = radeon_read_bios(rdev);
+	} else
+		r = radeon_read_bios(rdev);
 	if (r == false) {
 		r = radeon_read_disabled_bios(rdev);
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c
index 152eef13197a..f5c32a766b10 100644
--- a/drivers/gpu/drm/radeon/radeon_clocks.c
+++ b/drivers/gpu/drm/radeon/radeon_clocks.c
@@ -411,7 +411,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable)
 					R300_PIXCLK_TRANS_ALWAYS_ONb |
 					R300_PIXCLK_TVO_ALWAYS_ONb |
 					R300_P2G2CLK_ALWAYS_ONb |
-					R300_P2G2CLK_ALWAYS_ONb);
+					R300_P2G2CLK_DAC_ALWAYS_ONb);
 				WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
 			} else if (rdev->family >= CHIP_RV350) {
 				tmp = RREG32_PLL(R300_SCLK_CNTL2);
@@ -464,7 +464,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable)
 					R300_PIXCLK_TRANS_ALWAYS_ONb |
 					R300_PIXCLK_TVO_ALWAYS_ONb |
 					R300_P2G2CLK_ALWAYS_ONb |
-					R300_P2G2CLK_ALWAYS_ONb);
+					R300_P2G2CLK_DAC_ALWAYS_ONb);
 				WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
 
 				tmp = RREG32_PLL(RADEON_MCLK_MISC);
@@ -654,7 +654,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable)
 				 R300_PIXCLK_TRANS_ALWAYS_ONb |
 				 R300_PIXCLK_TVO_ALWAYS_ONb |
 				 R300_P2G2CLK_ALWAYS_ONb |
-				 R300_P2G2CLK_ALWAYS_ONb |
+				 R300_P2G2CLK_DAC_ALWAYS_ONb |
 				 R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF);
 			WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
 		} else if (rdev->family >= CHIP_RV350) {
@@ -705,7 +705,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable)
 				 R300_PIXCLK_TRANS_ALWAYS_ONb |
 				 R300_PIXCLK_TVO_ALWAYS_ONb |
 				 R300_P2G2CLK_ALWAYS_ONb |
-				 R300_P2G2CLK_ALWAYS_ONb |
+				 R300_P2G2CLK_DAC_ALWAYS_ONb |
 				 R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF);
 			WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
 		} else {
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index af1d551f1a8f..e376be47a4a0 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -26,6 +26,7 @@
 #include "drmP.h"
 #include "drm_edid.h"
 #include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
 #include "radeon_drm.h"
 #include "radeon.h"
 #include "atom.h"
@@ -245,7 +246,7 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn
 		if (common_modes[i].w < 320 || common_modes[i].h < 200)
 			continue;
 
-		mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false);
+		mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false, false);
 		drm_mode_probed_add(connector, mode);
 	}
 }
@@ -559,7 +560,7 @@ static int radeon_tv_get_modes(struct drm_connector *connector)
 		radeon_add_common_modes(encoder, connector);
 	else {
 		/* only 800x600 is supported right now on pre-avivo chips */
-		tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false);
+		tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false, false);
 		tv_mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
 		drm_mode_probed_add(connector, tv_mode);
 	}
@@ -743,6 +744,15 @@ struct drm_encoder *radeon_dvi_encoder(struct drm_connector *connector)
 	return NULL;
 }
 
+static void radeon_dvi_force(struct drm_connector *connector)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	if (connector->force == DRM_FORCE_ON)
+		radeon_connector->use_digital = false;
+	if (connector->force == DRM_FORCE_ON_DIGITAL)
+		radeon_connector->use_digital = true;
+}
+
 struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = {
 	.get_modes = radeon_dvi_get_modes,
 	.mode_valid = radeon_vga_mode_valid,
@@ -755,6 +765,7 @@ struct drm_connector_funcs radeon_dvi_connector_funcs = {
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = radeon_connector_set_property,
 	.destroy = radeon_connector_destroy,
+	.force = radeon_dvi_force,
 };
 
 void
@@ -771,6 +782,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 	struct radeon_connector *radeon_connector;
 	struct radeon_connector_atom_dig *radeon_dig_connector;
 	uint32_t subpixel_order = SubPixelNone;
+	int ret;
 
 	/* fixme - tv/cv/din */
 	if (connector_type == DRM_MODE_CONNECTOR_Unknown)
@@ -796,24 +808,30 @@ radeon_add_atom_connector(struct drm_device *dev,
 	switch (connector_type) {
 	case DRM_MODE_CONNECTOR_VGA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
@@ -827,7 +845,9 @@ radeon_add_atom_connector(struct drm_device *dev,
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
@@ -837,6 +857,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.coherent_mode_property,
 					      1);
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
@@ -850,7 +871,9 @@ radeon_add_atom_connector(struct drm_device *dev,
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "HDMI");
 			if (!radeon_connector->ddc_bus)
@@ -869,7 +892,9 @@ radeon_add_atom_connector(struct drm_device *dev,
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
 			if (!radeon_connector->ddc_bus)
@@ -882,11 +907,14 @@ radeon_add_atom_connector(struct drm_device *dev,
 	case DRM_MODE_CONNECTOR_9PinDIN:
 		if (radeon_tv == 1) {
 			drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type);
-			drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			if (ret)
+				goto failed;
+			radeon_connector->dac_load_detect = true;
+			drm_connector_attach_property(&radeon_connector->base,
+						      rdev->mode_info.load_detect_property,
+						      1);
 		}
-		drm_connector_attach_property(&radeon_connector->base,
-					      rdev->mode_info.load_detect_property,
-					      1);
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
 		radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
@@ -896,7 +924,9 @@ radeon_add_atom_connector(struct drm_device *dev,
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
 			if (!radeon_connector->ddc_bus)
@@ -932,6 +962,7 @@ radeon_add_legacy_connector(struct drm_device *dev,
 	struct drm_connector *connector;
 	struct radeon_connector *radeon_connector;
 	uint32_t subpixel_order = SubPixelNone;
+	int ret;
 
 	/* fixme - tv/cv/din */
 	if (connector_type == DRM_MODE_CONNECTOR_Unknown)
@@ -957,24 +988,30 @@ radeon_add_legacy_connector(struct drm_device *dev,
 	switch (connector_type) {
 	case DRM_MODE_CONNECTOR_VGA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
@@ -982,11 +1019,14 @@ radeon_add_legacy_connector(struct drm_device *dev,
 	case DRM_MODE_CONNECTOR_DVII:
 	case DRM_MODE_CONNECTOR_DVID:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
+			radeon_connector->dac_load_detect = true;
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.load_detect_property,
 						      1);
@@ -998,7 +1038,10 @@ radeon_add_legacy_connector(struct drm_device *dev,
 	case DRM_MODE_CONNECTOR_9PinDIN:
 		if (radeon_tv == 1) {
 			drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type);
-			drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			if (ret)
+				goto failed;
+			radeon_connector->dac_load_detect = true;
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.load_detect_property,
 						      1);
@@ -1006,7 +1049,9 @@ radeon_add_legacy_connector(struct drm_device *dev,
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
 			if (!radeon_connector->ddc_bus)
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index 12f5990c2d2a..5ab2cf96a264 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -142,15 +142,31 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
 		}
 
 		p->chunks[i].length_dw = user_chunk.length_dw;
-		cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
+		p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data;
 
-		size = p->chunks[i].length_dw * sizeof(uint32_t);
-		p->chunks[i].kdata = kmalloc(size, GFP_KERNEL);
-		if (p->chunks[i].kdata == NULL) {
-			return -ENOMEM;
-		}
-		if (DRM_COPY_FROM_USER(p->chunks[i].kdata, cdata, size)) {
-			return -EFAULT;
+		cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
+		if (p->chunks[i].chunk_id != RADEON_CHUNK_ID_IB) {
+			size = p->chunks[i].length_dw * sizeof(uint32_t);
+			p->chunks[i].kdata = kmalloc(size, GFP_KERNEL);
+			if (p->chunks[i].kdata == NULL) {
+				return -ENOMEM;
+			}
+			if (DRM_COPY_FROM_USER(p->chunks[i].kdata,
+					       p->chunks[i].user_ptr, size)) {
+				return -EFAULT;
+			}
+		} else {
+			p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+			p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+			if (p->chunks[i].kpage[0] == NULL || p->chunks[i].kpage[1] == NULL) {
+				kfree(p->chunks[i].kpage[0]);
+				kfree(p->chunks[i].kpage[1]);
+				return -ENOMEM;
+			}
+			p->chunks[i].kpage_idx[0] = -1;
+			p->chunks[i].kpage_idx[1] = -1;
+			p->chunks[i].last_copied_page = -1;
+			p->chunks[i].last_page_index = ((p->chunks[i].length_dw * 4) - 1) / PAGE_SIZE;
 		}
 	}
 	if (p->chunks[p->chunk_ib_idx].length_dw > (16 * 1024)) {
@@ -190,6 +206,8 @@ static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error)
 	kfree(parser->relocs_ptr);
 	for (i = 0; i < parser->nchunks; i++) {
 		kfree(parser->chunks[i].kdata);
+		kfree(parser->chunks[i].kpage[0]);
+		kfree(parser->chunks[i].kpage[1]);
 	}
 	kfree(parser->chunks);
 	kfree(parser->chunks_array);
@@ -238,8 +256,14 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 	 * uncached). */
 	ib_chunk = &parser.chunks[parser.chunk_ib_idx];
 	parser.ib->length_dw = ib_chunk->length_dw;
-	memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4);
 	r = radeon_cs_parse(&parser);
+	if (r || parser.parser_error) {
+		DRM_ERROR("Invalid command stream !\n");
+		radeon_cs_parser_fini(&parser, r);
+		mutex_unlock(&rdev->cs_mutex);
+		return r;
+	}
+	r = radeon_cs_finish_pages(&parser);
 	if (r) {
 		DRM_ERROR("Invalid command stream !\n");
 		radeon_cs_parser_fini(&parser, r);
@@ -254,3 +278,64 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 	mutex_unlock(&rdev->cs_mutex);
 	return r;
 }
+
+int radeon_cs_finish_pages(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+	int i;
+	int size = PAGE_SIZE;
+
+	for (i = ibc->last_copied_page + 1; i <= ibc->last_page_index; i++) {
+		if (i == ibc->last_page_index) {
+			size = (ibc->length_dw * 4) % PAGE_SIZE;
+			if (size == 0)
+				size = PAGE_SIZE;
+		}
+		
+		if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)),
+				       ibc->user_ptr + (i * PAGE_SIZE),
+				       size))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx)
+{
+	int new_page;
+	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+	int i;
+	int size = PAGE_SIZE;
+
+	for (i = ibc->last_copied_page + 1; i < pg_idx; i++) {
+		if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)),
+				       ibc->user_ptr + (i * PAGE_SIZE),
+				       PAGE_SIZE)) {
+			p->parser_error = -EFAULT;
+			return 0;
+		}
+	}
+
+	new_page = ibc->kpage_idx[0] < ibc->kpage_idx[1] ? 0 : 1;
+
+	if (pg_idx == ibc->last_page_index) {
+		size = (ibc->length_dw * 4) % PAGE_SIZE;
+			if (size == 0)
+				size = PAGE_SIZE;
+	}
+
+	if (DRM_COPY_FROM_USER(ibc->kpage[new_page],
+			       ibc->user_ptr + (pg_idx * PAGE_SIZE),
+			       size)) {
+		p->parser_error = -EFAULT;
+		return 0;
+	}
+
+	/* copy to IB here */
+	memcpy((void *)(p->ib->ptr+(pg_idx*(PAGE_SIZE/4))), ibc->kpage[new_page], size);
+
+	ibc->last_copied_page = pg_idx;
+	ibc->kpage_idx[new_page] = pg_idx;
+
+	return new_page;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index daf5db780956..df988142e6b0 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -322,10 +322,6 @@ int radeon_asic_init(struct radeon_device *rdev)
 	case CHIP_RV380:
 		rdev->asic = &r300_asic;
 		if (rdev->flags & RADEON_IS_PCIE) {
-			rdev->asic->gart_init = &rv370_pcie_gart_init;
-			rdev->asic->gart_fini = &rv370_pcie_gart_fini;
-			rdev->asic->gart_enable = &rv370_pcie_gart_enable;
-			rdev->asic->gart_disable = &rv370_pcie_gart_disable;
 			rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
 			rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
 		}
@@ -485,7 +481,6 @@ void radeon_combios_fini(struct radeon_device *rdev)
 static unsigned int radeon_vga_set_decode(void *cookie, bool state)
 {
 	struct radeon_device *rdev = cookie;
-
 	radeon_vga_set_state(rdev, state);
 	if (state)
 		return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
@@ -493,6 +488,29 @@ static unsigned int radeon_vga_set_decode(void *cookie, bool state)
 	else
 		return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
 }
+
+void radeon_agp_disable(struct radeon_device *rdev)
+{
+	rdev->flags &= ~RADEON_IS_AGP;
+	if (rdev->family >= CHIP_R600) {
+		DRM_INFO("Forcing AGP to PCIE mode\n");
+		rdev->flags |= RADEON_IS_PCIE;
+	} else if (rdev->family >= CHIP_RV515 ||
+			rdev->family == CHIP_RV380 ||
+			rdev->family == CHIP_RV410 ||
+			rdev->family == CHIP_R423) {
+		DRM_INFO("Forcing AGP to PCIE mode\n");
+		rdev->flags |= RADEON_IS_PCIE;
+		rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
+		rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
+	} else {
+		DRM_INFO("Forcing AGP to PCI mode\n");
+		rdev->flags |= RADEON_IS_PCI;
+		rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush;
+		rdev->asic->gart_set_page = &r100_pci_gart_set_page;
+	}
+}
+
 /*
  * Radeon device.
  */
@@ -531,29 +549,7 @@ int radeon_device_init(struct radeon_device *rdev,
 	}
 
 	if (radeon_agpmode == -1) {
-		rdev->flags &= ~RADEON_IS_AGP;
-		if (rdev->family >= CHIP_RV515 ||
-		    rdev->family == CHIP_RV380 ||
-		    rdev->family == CHIP_RV410 ||
-		    rdev->family == CHIP_R423) {
-			DRM_INFO("Forcing AGP to PCIE mode\n");
-			rdev->flags |= RADEON_IS_PCIE;
-			rdev->asic->gart_init = &rv370_pcie_gart_init;
-			rdev->asic->gart_fini = &rv370_pcie_gart_fini;
-			rdev->asic->gart_enable = &rv370_pcie_gart_enable;
-			rdev->asic->gart_disable = &rv370_pcie_gart_disable;
-			rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
-			rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
-		} else {
-			DRM_INFO("Forcing AGP to PCI mode\n");
-			rdev->flags |= RADEON_IS_PCI;
-			rdev->asic->gart_init = &r100_pci_gart_init;
-			rdev->asic->gart_fini = &r100_pci_gart_fini;
-			rdev->asic->gart_enable = &r100_pci_gart_enable;
-			rdev->asic->gart_disable = &r100_pci_gart_disable;
-			rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush;
-			rdev->asic->gart_set_page = &r100_pci_gart_set_page;
-		}
+		radeon_agp_disable(rdev);
 	}
 
 	/* set DMA mask + need_dma32 flags.
@@ -585,111 +581,26 @@ int radeon_device_init(struct radeon_device *rdev,
 	DRM_INFO("register mmio base: 0x%08X\n", (uint32_t)rdev->rmmio_base);
 	DRM_INFO("register mmio size: %u\n", (unsigned)rdev->rmmio_size);
 
-	rdev->new_init_path = false;
-	r = radeon_init(rdev);
-	if (r) {
-		return r;
-	}
-
 	/* if we have > 1 VGA cards, then disable the radeon VGA resources */
-	r = vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode);
-	if (r) {
-		return -EINVAL;
-	}
-
-	if (!rdev->new_init_path) {
-		/* Setup errata flags */
-		radeon_errata(rdev);
-		/* Initialize scratch registers */
-		radeon_scratch_init(rdev);
-		/* Initialize surface registers */
-		radeon_surface_init(rdev);
+	/* this will fail for cards that aren't VGA class devices, just
+	 * ignore it */
+	vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode);
 
-		/* BIOS*/
-		if (!radeon_get_bios(rdev)) {
-			if (ASIC_IS_AVIVO(rdev))
-				return -EINVAL;
-		}
-		if (rdev->is_atom_bios) {
-			r = radeon_atombios_init(rdev);
-			if (r) {
-				return r;
-			}
-		} else {
-			r = radeon_combios_init(rdev);
-			if (r) {
-				return r;
-			}
-		}
-		/* Reset gpu before posting otherwise ATOM will enter infinite loop */
-		if (radeon_gpu_reset(rdev)) {
-			/* FIXME: what do we want to do here ? */
-		}
-		/* check if cards are posted or not */
-		if (!radeon_card_posted(rdev) && rdev->bios) {
-			DRM_INFO("GPU not posted. posting now...\n");
-			if (rdev->is_atom_bios) {
-				atom_asic_init(rdev->mode_info.atom_context);
-			} else {
-				radeon_combios_asic_init(rdev->ddev);
-			}
-		}
-		/* Get clock & vram information */
-		radeon_get_clock_info(rdev->ddev);
-		radeon_vram_info(rdev);
-		/* Initialize clocks */
-		r = radeon_clocks_init(rdev);
-		if (r) {
-			return r;
-		}
+	r = radeon_init(rdev);
+	if (r)
+		return r;
 
-		/* Initialize memory controller (also test AGP) */
-		r = radeon_mc_init(rdev);
-		if (r) {
-			return r;
-		}
-		/* Fence driver */
-		r = radeon_fence_driver_init(rdev);
-		if (r) {
-			return r;
-		}
-		r = radeon_irq_kms_init(rdev);
-		if (r) {
-			return r;
-		}
-		/* Memory manager */
-		r = radeon_object_init(rdev);
-		if (r) {
-			return r;
-		}
-		r = radeon_gpu_gart_init(rdev);
+	if (rdev->flags & RADEON_IS_AGP && !rdev->accel_working) {
+		/* Acceleration not working on AGP card try again
+		 * with fallback to PCI or PCIE GART
+		 */
+		radeon_gpu_reset(rdev);
+		radeon_fini(rdev);
+		radeon_agp_disable(rdev);
+		r = radeon_init(rdev);
 		if (r)
 			return r;
-		/* Initialize GART (initialize after TTM so we can allocate
-		 * memory through TTM but finalize after TTM) */
-		r = radeon_gart_enable(rdev);
-		if (r)
-			return 0;
-			r = radeon_gem_init(rdev);
-		if (r)
-			return 0;
-
-		/* 1M ring buffer */
-		r = radeon_cp_init(rdev, 1024 * 1024);
-		if (r)
-			return 0;
-		r = radeon_wb_init(rdev);
-		if (r)
-			DRM_ERROR("radeon: failled initializing WB (%d).\n", r);
-		r = radeon_ib_pool_init(rdev);
-		if (r)
-			return 0;
-		r = radeon_ib_test(rdev);
-		if (r)
-			return 0;
-		rdev->accel_working = true;
 	}
-	DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
 	if (radeon_testing) {
 		radeon_test_moves(rdev);
 	}
@@ -703,32 +614,8 @@ void radeon_device_fini(struct radeon_device *rdev)
 {
 	DRM_INFO("radeon: finishing device.\n");
 	rdev->shutdown = true;
-	/* Order matter so becarefull if you rearrange anythings */
-	if (!rdev->new_init_path) {
-		radeon_ib_pool_fini(rdev);
-		radeon_cp_fini(rdev);
-		radeon_wb_fini(rdev);
-		radeon_gpu_gart_fini(rdev);
-		radeon_gem_fini(rdev);
-		radeon_mc_fini(rdev);
-#if __OS_HAS_AGP
-		radeon_agp_fini(rdev);
-#endif
-		radeon_irq_kms_fini(rdev);
-		vga_client_register(rdev->pdev, NULL, NULL, NULL);
-		radeon_fence_driver_fini(rdev);
-		radeon_clocks_fini(rdev);
-		radeon_object_fini(rdev);
-		if (rdev->is_atom_bios) {
-			radeon_atombios_fini(rdev);
-		} else {
-			radeon_combios_fini(rdev);
-		}
-		kfree(rdev->bios);
-		rdev->bios = NULL;
-	} else {
-		radeon_fini(rdev);
-	}
+	radeon_fini(rdev);
+	vga_client_register(rdev->pdev, NULL, NULL, NULL);
 	iounmap(rdev->rmmio);
 	rdev->rmmio = NULL;
 }
@@ -768,14 +655,7 @@ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
 
 	radeon_save_bios_scratch_regs(rdev);
 
-	if (!rdev->new_init_path) {
-		radeon_cp_disable(rdev);
-		radeon_gart_disable(rdev);
-		rdev->irq.sw_int = false;
-		radeon_irq_set(rdev);
-	} else {
-		radeon_suspend(rdev);
-	}
+	radeon_suspend(rdev);
 	/* evict remaining vram memory */
 	radeon_object_evict_vram(rdev);
 
@@ -794,7 +674,6 @@ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
 int radeon_resume_kms(struct drm_device *dev)
 {
 	struct radeon_device *rdev = dev->dev_private;
-	int r;
 
 	acquire_console_sem();
 	pci_set_power_state(dev->pdev, PCI_D0);
@@ -804,43 +683,7 @@ int radeon_resume_kms(struct drm_device *dev)
 		return -1;
 	}
 	pci_set_master(dev->pdev);
-	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
-	if (!rdev->new_init_path) {
-		if (radeon_gpu_reset(rdev)) {
-			/* FIXME: what do we want to do here ? */
-		}
-		/* post card */
-		if (rdev->is_atom_bios) {
-			atom_asic_init(rdev->mode_info.atom_context);
-		} else {
-			radeon_combios_asic_init(rdev->ddev);
-		}
-		/* Initialize clocks */
-		r = radeon_clocks_init(rdev);
-		if (r) {
-			release_console_sem();
-			return r;
-		}
-		/* Enable IRQ */
-		rdev->irq.sw_int = true;
-		radeon_irq_set(rdev);
-		/* Initialize GPU Memory Controller */
-		r = radeon_mc_init(rdev);
-		if (r) {
-			goto out;
-		}
-		r = radeon_gart_enable(rdev);
-		if (r) {
-			goto out;
-		}
-		r = radeon_cp_init(rdev, rdev->cp.ring_size);
-		if (r) {
-			goto out;
-		}
-	} else {
-		radeon_resume(rdev);
-	}
-out:
+	radeon_resume(rdev);
 	radeon_restore_bios_scratch_regs(rdev);
 	fb_set_suspend(rdev->fbdev_info, 0);
 	release_console_sem();
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 5d8141b13765..3655d91993a6 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -106,24 +106,33 @@ void radeon_crtc_load_lut(struct drm_crtc *crtc)
 		legacy_crtc_load_lut(crtc);
 }
 
-/** Sets the color ramps on behalf of RandR */
+/** Sets the color ramps on behalf of fbcon */
 void radeon_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
 			      u16 blue, int regno)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 
-	if (regno == 0)
-		DRM_DEBUG("gamma set %d\n", radeon_crtc->crtc_id);
 	radeon_crtc->lut_r[regno] = red >> 6;
 	radeon_crtc->lut_g[regno] = green >> 6;
 	radeon_crtc->lut_b[regno] = blue >> 6;
 }
 
+/** Gets the color ramps on behalf of fbcon */
+void radeon_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+			      u16 *blue, int regno)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+	*red = radeon_crtc->lut_r[regno] << 6;
+	*green = radeon_crtc->lut_g[regno] << 6;
+	*blue = radeon_crtc->lut_b[regno] << 6;
+}
+
 static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
 				  u16 *blue, uint32_t size)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
-	int i, j;
+	int i;
 
 	if (size != 256) {
 		return;
@@ -132,23 +141,11 @@ static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
 		return;
 	}
 
-	if (crtc->fb->depth == 16) {
-		for (i = 0; i < 64; i++) {
-			if (i <= 31) {
-				for (j = 0; j < 8; j++) {
-					radeon_crtc->lut_r[i * 8 + j] = red[i] >> 6;
-					radeon_crtc->lut_b[i * 8 + j] = blue[i] >> 6;
-				}
-			}
-			for (j = 0; j < 4; j++)
-				radeon_crtc->lut_g[i * 4 + j] = green[i] >> 6;
-		}
-	} else {
-		for (i = 0; i < 256; i++) {
-			radeon_crtc->lut_r[i] = red[i] >> 6;
-			radeon_crtc->lut_g[i] = green[i] >> 6;
-			radeon_crtc->lut_b[i] = blue[i] >> 6;
-		}
+	/* userspace palettes are always correct as is */
+	for (i = 0; i < 256; i++) {
+		radeon_crtc->lut_r[i] = red[i] >> 6;
+		radeon_crtc->lut_g[i] = green[i] >> 6;
+		radeon_crtc->lut_b[i] = blue[i] >> 6;
 	}
 
 	radeon_crtc_load_lut(crtc);
@@ -724,7 +721,11 @@ int radeon_modeset_init(struct radeon_device *rdev)
 	if (ret) {
 		return ret;
 	}
-	/* allocate crtcs - TODO single crtc */
+
+	if (rdev->flags & RADEON_SINGLE_CRTC)
+		num_crtc = 1;
+
+	/* allocate crtcs */
 	for (i = 0; i < num_crtc; i++) {
 		radeon_crtc_init(rdev->ddev, i);
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 50fce498910c..7f50fb864af8 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -62,9 +62,6 @@ void radeon_driver_irq_preinstall_kms(struct drm_device *dev);
 int radeon_driver_irq_postinstall_kms(struct drm_device *dev);
 void radeon_driver_irq_uninstall_kms(struct drm_device *dev);
 irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS);
-int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master);
-void radeon_master_destroy_kms(struct drm_device *dev,
-			       struct drm_master *master);
 int radeon_dma_ioctl_kms(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv);
 int radeon_gem_object_init(struct drm_gem_object *obj);
@@ -260,8 +257,6 @@ static struct drm_driver kms_driver = {
 	.get_vblank_counter = radeon_get_vblank_counter_kms,
 	.enable_vblank = radeon_enable_vblank_kms,
 	.disable_vblank = radeon_disable_vblank_kms,
-	.master_create = radeon_master_create_kms,
-	.master_destroy = radeon_master_destroy_kms,
 #if defined(CONFIG_DEBUG_FS)
 	.debugfs_init = radeon_debugfs_init,
 	.debugfs_cleanup = radeon_debugfs_cleanup,
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 621646752cd2..a65ab1a0dad2 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1345,6 +1345,7 @@ radeon_atombios_set_dig_info(struct radeon_encoder *radeon_encoder)
 void
 radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t supported_device)
 {
+	struct radeon_device *rdev = dev->dev_private;
 	struct drm_encoder *encoder;
 	struct radeon_encoder *radeon_encoder;
 
@@ -1364,7 +1365,10 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su
 		return;
 
 	encoder = &radeon_encoder->base;
-	encoder->possible_crtcs = 0x3;
+	if (rdev->flags & RADEON_SINGLE_CRTC)
+		encoder->possible_crtcs = 0x1;
+	else
+		encoder->possible_crtcs = 0x3;
 	encoder->possible_clones = 0;
 
 	radeon_encoder->enc_priv = NULL;
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 944e4fa78db5..b38c4c8e2c61 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -55,6 +55,7 @@ static struct fb_ops radeonfb_ops = {
 	.fb_imageblit = cfb_imageblit,
 	.fb_pan_display = drm_fb_helper_pan_display,
 	.fb_blank = drm_fb_helper_blank,
+	.fb_setcmap = drm_fb_helper_setcmap,
 };
 
 /**
@@ -123,11 +124,13 @@ static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp, bo
 
 static struct drm_fb_helper_funcs radeon_fb_helper_funcs = {
 	.gamma_set = radeon_crtc_fb_gamma_set,
+	.gamma_get = radeon_crtc_fb_gamma_get,
 };
 
 int radeonfb_create(struct drm_device *dev,
 		    uint32_t fb_width, uint32_t fb_height,
 		    uint32_t surface_width, uint32_t surface_height,
+		    uint32_t surface_depth, uint32_t surface_bpp,
 		    struct drm_framebuffer **fb_p)
 {
 	struct radeon_device *rdev = dev->dev_private;
@@ -145,13 +148,19 @@ int radeonfb_create(struct drm_device *dev,
 	unsigned long tmp;
 	bool fb_tiled = false; /* useful for testing */
 	u32 tiling_flags = 0;
+	int crtc_count;
 
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
-	mode_cmd.bpp = 32;
+
+	/* avivo can't scanout real 24bpp */
+	if ((surface_bpp == 24) && ASIC_IS_AVIVO(rdev))
+		surface_bpp = 32;
+
+	mode_cmd.bpp = surface_bpp;
 	/* need to align pitch with crtc limits */
 	mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8);
-	mode_cmd.depth = 24;
+	mode_cmd.depth = surface_depth;
 
 	size = mode_cmd.pitch * mode_cmd.height;
 	aligned_size = ALIGN(size, PAGE_SIZE);
@@ -216,7 +225,11 @@ int radeonfb_create(struct drm_device *dev,
 	rfbdev = info->par;
 	rfbdev->helper.funcs = &radeon_fb_helper_funcs;
 	rfbdev->helper.dev = dev;
-	ret = drm_fb_helper_init_crtc_count(&rfbdev->helper, 2,
+	if (rdev->flags & RADEON_SINGLE_CRTC)
+		crtc_count = 1;
+	else
+		crtc_count = 2;
+	ret = drm_fb_helper_init_crtc_count(&rfbdev->helper, crtc_count,
 					    RADEONFB_CONN_LIMIT);
 	if (ret)
 		goto out_unref;
@@ -233,7 +246,7 @@ int radeonfb_create(struct drm_device *dev,
 
 	strcpy(info->fix.id, "radeondrmfb");
 
-	drm_fb_helper_fill_fix(info, fb->pitch);
+	drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
 
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &radeonfb_ops;
@@ -290,13 +303,26 @@ out:
 	return ret;
 }
 
+static char *mode_option;
+int radeon_parse_options(char *options)
+{
+	char *this_opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		if (!*this_opt)
+			continue;
+		mode_option = this_opt;
+	}
+	return 0;
+}
+
 int radeonfb_probe(struct drm_device *dev)
 {
-	int ret;
-	ret = drm_fb_helper_single_fb_probe(dev, &radeonfb_create);
-	return ret;
+	return drm_fb_helper_single_fb_probe(dev, 32, &radeonfb_create);
 }
-EXPORT_SYMBOL(radeonfb_probe);
 
 int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb)
 {
diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
index 1841145a7c4f..8e0a8759e428 100644
--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -83,8 +83,12 @@ void radeon_driver_irq_uninstall_kms(struct drm_device *dev)
 int radeon_irq_kms_init(struct radeon_device *rdev)
 {
 	int r = 0;
+	int num_crtc = 2;
 
-	r = drm_vblank_init(rdev->ddev, 2);
+	if (rdev->flags & RADEON_SINGLE_CRTC)
+		num_crtc = 1;
+
+	r = drm_vblank_init(rdev->ddev, num_crtc);
 	if (r) {
 		return r;
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 709bd892b3a9..ba128621057a 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -201,55 +201,6 @@ void radeon_disable_vblank_kms(struct drm_device *dev, int crtc)
 
 
 /*
- * For multiple master (like multiple X).
- */
-struct drm_radeon_master_private {
-	drm_local_map_t *sarea;
-	drm_radeon_sarea_t *sarea_priv;
-};
-
-int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master)
-{
-	struct drm_radeon_master_private *master_priv;
-	unsigned long sareapage;
-	int ret;
-
-	master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
-	if (master_priv == NULL) {
-		return -ENOMEM;
-	}
-	/* prebuild the SAREA */
-	sareapage = max_t(unsigned long, SAREA_MAX, PAGE_SIZE);
-	ret = drm_addmap(dev, 0, sareapage, _DRM_SHM,
-			 _DRM_CONTAINS_LOCK,
-			 &master_priv->sarea);
-	if (ret) {
-		DRM_ERROR("SAREA setup failed\n");
-		return ret;
-	}
-	master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea);
-	master_priv->sarea_priv->pfCurrentPage = 0;
-	master->driver_priv = master_priv;
-	return 0;
-}
-
-void radeon_master_destroy_kms(struct drm_device *dev,
-			       struct drm_master *master)
-{
-	struct drm_radeon_master_private *master_priv = master->driver_priv;
-
-	if (master_priv == NULL) {
-		return;
-	}
-	if (master_priv->sarea) {
-		drm_rmmap_locked(dev, master_priv->sarea);
-	}
-	kfree(master_priv);
-	master->driver_priv = NULL;
-}
-
-
-/*
  * IOCTL.
  */
 int radeon_dma_ioctl_kms(struct drm_device *dev, void *data,
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 2b997a15fb1f..36410f85d705 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -1053,6 +1053,7 @@ static const struct drm_crtc_helper_funcs legacy_helper_funcs = {
 	.mode_set_base = radeon_crtc_set_base,
 	.prepare = radeon_crtc_prepare,
 	.commit = radeon_crtc_commit,
+	.load_lut = radeon_crtc_load_lut,
 };
 
 
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index b1547f700d73..6ceb958fd194 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -881,7 +881,7 @@ static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder,
 					R420_TV_DAC_DACADJ_MASK |
 					R420_TV_DAC_RDACPD |
 					R420_TV_DAC_GDACPD |
-					R420_TV_DAC_GDACPD |
+					R420_TV_DAC_BDACPD |
 					R420_TV_DAC_TVENABLE);
 		} else {
 			tv_dac_cntl &= ~(RADEON_TV_DAC_STD_MASK |
@@ -889,7 +889,7 @@ static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder,
 					RADEON_TV_DAC_DACADJ_MASK |
 					RADEON_TV_DAC_RDACPD |
 					RADEON_TV_DAC_GDACPD |
-					RADEON_TV_DAC_GDACPD);
+					RADEON_TV_DAC_BDACPD);
 		}
 
 		/*  FIXME TV */
@@ -1318,7 +1318,10 @@ radeon_add_legacy_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t
 		return;
 
 	encoder = &radeon_encoder->base;
-	encoder->possible_crtcs = 0x3;
+	if (rdev->flags & RADEON_SINGLE_CRTC)
+		encoder->possible_crtcs = 0x1;
+	else
+		encoder->possible_crtcs = 0x3;
 	encoder->possible_clones = 0;
 
 	radeon_encoder->enc_priv = NULL;
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 570a58729daf..e61226817ccf 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -407,6 +407,8 @@ extern void
 radeon_combios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on);
 extern void radeon_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
 				     u16 blue, int regno);
+extern void radeon_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+				     u16 *blue, int regno);
 struct drm_framebuffer *radeon_framebuffer_create(struct drm_device *dev,
 						  struct drm_mode_fb_cmd *mode_cmd,
 						  struct drm_gem_object *obj);
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 73af463b7a59..1f056dadc5c2 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -400,11 +400,9 @@ void radeon_object_list_add_object(struct radeon_object_list *lobj,
 int radeon_object_list_reserve(struct list_head *head)
 {
 	struct radeon_object_list *lobj;
-	struct list_head *i;
 	int r;
 
-	list_for_each(i, head) {
-		lobj = list_entry(i, struct radeon_object_list, list);
+	list_for_each_entry(lobj, head, list){
 		if (!lobj->robj->pin_count) {
 			r = radeon_object_reserve(lobj->robj, true);
 			if (unlikely(r != 0)) {
@@ -420,13 +418,10 @@ int radeon_object_list_reserve(struct list_head *head)
 void radeon_object_list_unreserve(struct list_head *head)
 {
 	struct radeon_object_list *lobj;
-	struct list_head *i;
 
-	list_for_each(i, head) {
-		lobj = list_entry(i, struct radeon_object_list, list);
+	list_for_each_entry(lobj, head, list) {
 		if (!lobj->robj->pin_count) {
 			radeon_object_unreserve(lobj->robj);
-		} else {
 		}
 	}
 }
@@ -436,7 +431,6 @@ int radeon_object_list_validate(struct list_head *head, void *fence)
 	struct radeon_object_list *lobj;
 	struct radeon_object *robj;
 	struct radeon_fence *old_fence = NULL;
-	struct list_head *i;
 	int r;
 
 	r = radeon_object_list_reserve(head);
@@ -444,8 +438,7 @@ int radeon_object_list_validate(struct list_head *head, void *fence)
 		radeon_object_list_unreserve(head);
 		return r;
 	}
-	list_for_each(i, head) {
-		lobj = list_entry(i, struct radeon_object_list, list);
+	list_for_each_entry(lobj, head, list) {
 		robj = lobj->robj;
 		if (!robj->pin_count) {
 			if (lobj->wdomain) {
@@ -482,10 +475,8 @@ void radeon_object_list_unvalidate(struct list_head *head)
 {
 	struct radeon_object_list *lobj;
 	struct radeon_fence *old_fence = NULL;
-	struct list_head *i;
 
-	list_for_each(i, head) {
-		lobj = list_entry(i, struct radeon_object_list, list);
+	list_for_each_entry(lobj, head, list) {
 		old_fence = (struct radeon_fence *)lobj->robj->tobj.sync_obj;
 		lobj->robj->tobj.sync_obj = NULL;
 		if (old_fence) {
diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h
index 21da871a793c..bfa1ab9c93e1 100644
--- a/drivers/gpu/drm/radeon/radeon_reg.h
+++ b/drivers/gpu/drm/radeon/radeon_reg.h
@@ -3333,6 +3333,7 @@
 #       define RADEON_CP_PACKET_MAX_DWORDS          (1 << 12)
 #       define RADEON_CP_PACKET0_REG_MASK           0x000007ff
 #       define R300_CP_PACKET0_REG_MASK             0x00001fff
+#       define R600_CP_PACKET0_REG_MASK             0x0000ffff
 #       define RADEON_CP_PACKET1_REG0_MASK          0x000007ff
 #       define RADEON_CP_PACKET1_REG1_MASK          0x003ff800
 
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 5b1cf04a011a..765bd184b6fc 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -689,9 +689,6 @@ struct ttm_backend *radeon_ttm_backend_create(struct radeon_device *rdev)
 
 #define RADEON_DEBUGFS_MEM_TYPES 2
 
-static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES];
-static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32];
-
 #if defined(CONFIG_DEBUG_FS)
 static int radeon_mm_dump_table(struct seq_file *m, void *data)
 {
@@ -711,9 +708,11 @@ static int radeon_mm_dump_table(struct seq_file *m, void *data)
 
 static int radeon_ttm_debugfs_init(struct radeon_device *rdev)
 {
+#if defined(CONFIG_DEBUG_FS)
+	static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES];
+	static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32];
 	unsigned i;
 
-#if defined(CONFIG_DEBUG_FS)
 	for (i = 0; i < RADEON_DEBUGFS_MEM_TYPES; i++) {
 		if (i == 0)
 			sprintf(radeon_mem_types_names[i], "radeon_vram_mm");
diff --git a/drivers/gpu/drm/radeon/rs100d.h b/drivers/gpu/drm/radeon/rs100d.h
new file mode 100644
index 000000000000..48a913a06cfd
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs100d.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RS100D_H__
+#define __RS100D_H__
+
+/* Registers */
+#define R_00015C_NB_TOM                              0x00015C
+#define   S_00015C_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_00015C_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_00015C_MC_FB_START                         0xFFFF0000
+#define   S_00015C_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_00015C_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_00015C_MC_FB_TOP                           0x0000FFFF
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index a3fbdad938c7..a769c296f6a6 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -27,27 +27,12 @@
  */
 #include <linux/seq_file.h>
 #include <drm/drmP.h>
-#include "radeon_reg.h"
 #include "radeon.h"
+#include "rs400d.h"
 
-/* rs400,rs480 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-void r100_mc_disable_clients(struct radeon_device *rdev);
-int r300_mc_wait_for_idle(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
+/* This files gather functions specifics to : rs400,rs480 */
+static int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
 
-/* This files gather functions specifics to :
- * rs400,rs480
- *
- * Some of these functions might be used by newer ASICs.
- */
-void rs400_gpu_init(struct radeon_device *rdev);
-int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
-
-
-/*
- * GART functions.
- */
 void rs400_gart_adjust_size(struct radeon_device *rdev)
 {
 	/* Check gart size */
@@ -238,61 +223,6 @@ int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 	return 0;
 }
 
-
-/*
- * MC functions.
- */
-int rs400_mc_init(struct radeon_device *rdev)
-{
-	uint32_t tmp;
-	int r;
-
-	if (r100_debugfs_rbbm_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
-	}
-
-	rs400_gpu_init(rdev);
-	rs400_gart_disable(rdev);
-	rdev->mc.gtt_location = rdev->mc.mc_vram_size;
-	rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
-	rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	r100_mc_disable_clients(rdev);
-	if (r300_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32(RADEON_MC_FB_LOCATION, tmp);
-	tmp = RREG32(RADEON_HOST_PATH_CNTL) | RADEON_HP_LIN_RD_CACHE_DIS;
-	WREG32(RADEON_HOST_PATH_CNTL, tmp | RADEON_HDP_SOFT_RESET | RADEON_HDP_READ_BUFFER_INVALIDATE);
-	(void)RREG32(RADEON_HOST_PATH_CNTL);
-	WREG32(RADEON_HOST_PATH_CNTL, tmp);
-	(void)RREG32(RADEON_HOST_PATH_CNTL);
-
-	return 0;
-}
-
-void rs400_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
-void rs400_errata(struct radeon_device *rdev)
-{
-	rdev->pll_errata = 0;
-}
-
 void rs400_gpu_init(struct radeon_device *rdev)
 {
 	/* FIXME: HDP same place on rs400 ? */
@@ -305,10 +235,6 @@ void rs400_gpu_init(struct radeon_device *rdev)
 	}
 }
 
-
-/*
- * VRAM info.
- */
 void rs400_vram_info(struct radeon_device *rdev)
 {
 	rs400_gart_adjust_size(rdev);
@@ -319,10 +245,6 @@ void rs400_vram_info(struct radeon_device *rdev)
 	r100_vram_init_sizes(rdev);
 }
 
-
-/*
- * Indirect registers accessor
- */
 uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg)
 {
 	uint32_t r;
@@ -340,10 +262,6 @@ void rs400_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 	WREG32(RS480_NB_MC_INDEX, 0xff);
 }
 
-
-/*
- * Debugfs info
- */
 #if defined(CONFIG_DEBUG_FS)
 static int rs400_debugfs_gart_info(struct seq_file *m, void *data)
 {
@@ -419,7 +337,7 @@ static struct drm_info_list rs400_gart_info_list[] = {
 };
 #endif
 
-int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
+static int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
 {
 #if defined(CONFIG_DEBUG_FS)
 	return radeon_debugfs_add_files(rdev, rs400_gart_info_list, 1);
@@ -427,3 +345,188 @@ int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
 	return 0;
 #endif
 }
+
+static int rs400_mc_init(struct radeon_device *rdev)
+{
+	int r;
+	u32 tmp;
+
+	/* Setup GPU memory space */
+	tmp = G_00015C_MC_FB_START(RREG32(R_00015C_NB_TOM));
+	rdev->mc.vram_location = G_00015C_MC_FB_START(tmp) << 16;
+	rdev->mc.gtt_location = 0xFFFFFFFFUL;
+	r = radeon_mc_setup(rdev);
+	if (r)
+		return r;
+	return 0;
+}
+
+void rs400_mc_program(struct radeon_device *rdev)
+{
+	struct r100_mc_save save;
+
+	/* Stops all mc clients */
+	r100_mc_stop(rdev, &save);
+
+	/* Wait for mc idle */
+	if (r300_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+	WREG32(R_000148_MC_FB_LOCATION,
+		S_000148_MC_FB_START(rdev->mc.vram_start >> 16) |
+		S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16));
+
+	r100_mc_resume(rdev, &save);
+}
+
+static int rs400_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	rs400_mc_program(rdev);
+	/* Resume clock */
+	r300_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	rs400_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	r = rs400_gart_enable(rdev);
+	if (r)
+		return r;
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	r100_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int rs400_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	rs400_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	r300_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	radeon_combios_asic_init(rdev->ddev);
+	/* Resume clock after posting */
+	r300_clock_startup(rdev);
+	return rs400_startup(rdev);
+}
+
+int rs400_suspend(struct radeon_device *rdev)
+{
+	r100_cp_disable(rdev);
+	r100_wb_disable(rdev);
+	r100_irq_disable(rdev);
+	rs400_gart_disable(rdev);
+	return 0;
+}
+
+void rs400_fini(struct radeon_device *rdev)
+{
+	rs400_suspend(rdev);
+	r100_cp_fini(rdev);
+	r100_wb_fini(rdev);
+	r100_ib_fini(rdev);
+	radeon_gem_fini(rdev);
+	rs400_gart_fini(rdev);
+	radeon_irq_kms_fini(rdev);
+	radeon_fence_driver_fini(rdev);
+	radeon_object_fini(rdev);
+	radeon_atombios_fini(rdev);
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+}
+
+int rs400_init(struct radeon_device *rdev)
+{
+	int r;
+
+	/* Disable VGA */
+	r100_vga_render_disable(rdev);
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		dev_err(rdev->dev, "Expecting combios for RS400/RS480 GPU\n");
+		return -EINVAL;
+	} else {
+		r = radeon_combios_init(rdev);
+		if (r)
+			return r;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		radeon_combios_asic_init(rdev->ddev);
+	}
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	rs400_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = rs400_mc_init(rdev);
+	if (r)
+		return r;
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	r = rs400_gart_init(rdev);
+	if (r)
+		return r;
+	r300_set_reg_safe(rdev);
+	rdev->accel_working = true;
+	r = rs400_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		rs400_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		rs400_gart_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
+	return 0;
+}
diff --git a/drivers/gpu/drm/radeon/rs400d.h b/drivers/gpu/drm/radeon/rs400d.h
new file mode 100644
index 000000000000..6d8bac58ced9
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs400d.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RS400D_H__
+#define __RS400D_H__
+
+/* Registers */
+#define R_000148_MC_FB_LOCATION                      0x000148
+#define   S_000148_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000148_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000148_MC_FB_START                         0xFFFF0000
+#define   S_000148_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000148_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000148_MC_FB_TOP                           0x0000FFFF
+#define R_00015C_NB_TOM                              0x00015C
+#define   S_00015C_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_00015C_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_00015C_MC_FB_START                         0xFFFF0000
+#define   S_00015C_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_00015C_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_00015C_MC_FB_TOP                           0x0000FFFF
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 0e791e26def3..10dfa78762da 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -25,28 +25,25 @@
  *          Alex Deucher
  *          Jerome Glisse
  */
+/* RS600 / Radeon X1250/X1270 integrated GPU
+ *
+ * This file gather function specific to RS600 which is the IGP of
+ * the X1250/X1270 family supporting intel CPU (while RS690/RS740
+ * is the X1250/X1270 supporting AMD CPU). The display engine are
+ * the avivo one, bios is an atombios, 3D block are the one of the
+ * R4XX family. The GART is different from the RS400 one and is very
+ * close to the one of the R600 family (R600 likely being an evolution
+ * of the RS600 GART block).
+ */
 #include "drmP.h"
-#include "radeon_reg.h"
 #include "radeon.h"
-#include "avivod.h"
+#include "atom.h"
+#include "rs600d.h"
 
 #include "rs600_reg_safe.h"
 
-/* rs600 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r300_mc_wait_for_idle(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
-
-/* This files gather functions specifics to :
- * rs600
- *
- * Some of these functions might be used by newer ASICs.
- */
 void rs600_gpu_init(struct radeon_device *rdev);
 int rs600_mc_wait_for_idle(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-
 
 /*
  * GART.
@@ -55,18 +52,18 @@ void rs600_gart_tlb_flush(struct radeon_device *rdev)
 {
 	uint32_t tmp;
 
-	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
-	tmp &= ~(RS600_INVALIDATE_ALL_L1_TLBS | RS600_INVALIDATE_L2_CACHE);
-	WREG32_MC(RS600_MC_PT0_CNTL, tmp);
+	tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
+	tmp &= C_000100_INVALIDATE_ALL_L1_TLBS & C_000100_INVALIDATE_L2_CACHE;
+	WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
 
-	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
-	tmp |= RS600_INVALIDATE_ALL_L1_TLBS | RS600_INVALIDATE_L2_CACHE;
-	WREG32_MC(RS600_MC_PT0_CNTL, tmp);
+	tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
+	tmp |= S_000100_INVALIDATE_ALL_L1_TLBS(1) & S_000100_INVALIDATE_L2_CACHE(1);
+	WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
 
-	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
-	tmp &= ~(RS600_INVALIDATE_ALL_L1_TLBS | RS600_INVALIDATE_L2_CACHE);
-	WREG32_MC(RS600_MC_PT0_CNTL, tmp);
-	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
+	tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
+	tmp &= C_000100_INVALIDATE_ALL_L1_TLBS & C_000100_INVALIDATE_L2_CACHE;
+	WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
+	tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
 }
 
 int rs600_gart_init(struct radeon_device *rdev)
@@ -88,7 +85,7 @@ int rs600_gart_init(struct radeon_device *rdev)
 
 int rs600_gart_enable(struct radeon_device *rdev)
 {
-	uint32_t tmp;
+	u32 tmp;
 	int r, i;
 
 	if (rdev->gart.table.vram.robj == NULL) {
@@ -98,46 +95,50 @@ int rs600_gart_enable(struct radeon_device *rdev)
 	r = radeon_gart_table_vram_pin(rdev);
 	if (r)
 		return r;
+	/* Enable bus master */
+	tmp = RREG32(R_00004C_BUS_CNTL) & C_00004C_BUS_MASTER_DIS;
+	WREG32(R_00004C_BUS_CNTL, tmp);
 	/* FIXME: setup default page */
-	WREG32_MC(RS600_MC_PT0_CNTL,
-		 (RS600_EFFECTIVE_L2_CACHE_SIZE(6) |
-		  RS600_EFFECTIVE_L2_QUEUE_SIZE(6)));
+	WREG32_MC(R_000100_MC_PT0_CNTL,
+		 (S_000100_EFFECTIVE_L2_CACHE_SIZE(6) |
+		  S_000100_EFFECTIVE_L2_QUEUE_SIZE(6)));
 	for (i = 0; i < 19; i++) {
-		WREG32_MC(RS600_MC_PT0_CLIENT0_CNTL + i,
-			 (RS600_ENABLE_TRANSLATION_MODE_OVERRIDE |
-			  RS600_SYSTEM_ACCESS_MODE_IN_SYS |
-			  RS600_SYSTEM_APERTURE_UNMAPPED_ACCESS_DEFAULT_PAGE |
-			  RS600_EFFECTIVE_L1_CACHE_SIZE(3) |
-			  RS600_ENABLE_FRAGMENT_PROCESSING |
-			  RS600_EFFECTIVE_L1_QUEUE_SIZE(3)));
+		WREG32_MC(R_00016C_MC_PT0_CLIENT0_CNTL + i,
+			S_00016C_ENABLE_TRANSLATION_MODE_OVERRIDE(1) |
+			S_00016C_SYSTEM_ACCESS_MODE_MASK(
+				V_00016C_SYSTEM_ACCESS_MODE_IN_SYS) |
+			S_00016C_SYSTEM_APERTURE_UNMAPPED_ACCESS(
+				V_00016C_SYSTEM_APERTURE_UNMAPPED_DEFAULT_PAGE) |
+			S_00016C_EFFECTIVE_L1_CACHE_SIZE(1) |
+			S_00016C_ENABLE_FRAGMENT_PROCESSING(1) |
+			S_00016C_EFFECTIVE_L1_QUEUE_SIZE(1));
 	}
 
 	/* System context map to GART space */
-	WREG32_MC(RS600_MC_PT0_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.gtt_location);
-	tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-	WREG32_MC(RS600_MC_PT0_SYSTEM_APERTURE_HIGH_ADDR, tmp);
+	WREG32_MC(R_000112_MC_PT0_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.gtt_start);
+	WREG32_MC(R_000114_MC_PT0_SYSTEM_APERTURE_HIGH_ADDR, rdev->mc.gtt_end);
 
 	/* enable first context */
-	WREG32_MC(RS600_MC_PT0_CONTEXT0_FLAT_START_ADDR, rdev->mc.gtt_location);
-	tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-	WREG32_MC(RS600_MC_PT0_CONTEXT0_FLAT_END_ADDR, tmp);
-	WREG32_MC(RS600_MC_PT0_CONTEXT0_CNTL,
-		 (RS600_ENABLE_PAGE_TABLE | RS600_PAGE_TABLE_TYPE_FLAT));
+	WREG32_MC(R_00013C_MC_PT0_CONTEXT0_FLAT_START_ADDR, rdev->mc.gtt_start);
+	WREG32_MC(R_00014C_MC_PT0_CONTEXT0_FLAT_END_ADDR, rdev->mc.gtt_end);
+	WREG32_MC(R_000102_MC_PT0_CONTEXT0_CNTL,
+			S_000102_ENABLE_PAGE_TABLE(1) |
+			S_000102_PAGE_TABLE_DEPTH(V_000102_PAGE_TABLE_FLAT));
 	/* disable all other contexts */
 	for (i = 1; i < 8; i++) {
-		WREG32_MC(RS600_MC_PT0_CONTEXT0_CNTL + i, 0);
+		WREG32_MC(R_000102_MC_PT0_CONTEXT0_CNTL + i, 0);
 	}
 
 	/* setup the page table */
-	WREG32_MC(RS600_MC_PT0_CONTEXT0_FLAT_BASE_ADDR,
-		 rdev->gart.table_addr);
-	WREG32_MC(RS600_MC_PT0_CONTEXT0_DEFAULT_READ_ADDR, 0);
+	WREG32_MC(R_00012C_MC_PT0_CONTEXT0_FLAT_BASE_ADDR,
+			rdev->gart.table_addr);
+	WREG32_MC(R_00011C_MC_PT0_CONTEXT0_DEFAULT_READ_ADDR, 0);
 
 	/* enable page tables */
-	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
-	WREG32_MC(RS600_MC_PT0_CNTL, (tmp | RS600_ENABLE_PT));
-	tmp = RREG32_MC(RS600_MC_CNTL1);
-	WREG32_MC(RS600_MC_CNTL1, (tmp | RS600_ENABLE_PAGE_TABLES));
+	tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
+	WREG32_MC(R_000100_MC_PT0_CNTL, (tmp | S_000100_ENABLE_PT(1)));
+	tmp = RREG32_MC(R_000009_MC_CNTL1);
+	WREG32_MC(R_000009_MC_CNTL1, (tmp | S_000009_ENABLE_PAGE_TABLES(1)));
 	rs600_gart_tlb_flush(rdev);
 	rdev->gart.ready = true;
 	return 0;
@@ -148,10 +149,9 @@ void rs600_gart_disable(struct radeon_device *rdev)
 	uint32_t tmp;
 
 	/* FIXME: disable out of gart access */
-	WREG32_MC(RS600_MC_PT0_CNTL, 0);
-	tmp = RREG32_MC(RS600_MC_CNTL1);
-	tmp &= ~RS600_ENABLE_PAGE_TABLES;
-	WREG32_MC(RS600_MC_CNTL1, tmp);
+	WREG32_MC(R_000100_MC_PT0_CNTL, 0);
+	tmp = RREG32_MC(R_000009_MC_CNTL1);
+	WREG32_MC(R_000009_MC_CNTL1, tmp & C_000009_ENABLE_PAGE_TABLES);
 	if (rdev->gart.table.vram.robj) {
 		radeon_object_kunmap(rdev->gart.table.vram.robj);
 		radeon_object_unpin(rdev->gart.table.vram.robj);
@@ -185,129 +185,61 @@ int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 	return 0;
 }
 
-
-/*
- * MC.
- */
-void rs600_mc_disable_clients(struct radeon_device *rdev)
-{
-	unsigned tmp;
-
-	if (r100_gui_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait GUI idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-
-	radeon_avivo_vga_render_disable(rdev);
-
-	tmp = RREG32(AVIVO_D1VGA_CONTROL);
-	WREG32(AVIVO_D1VGA_CONTROL, tmp & ~AVIVO_DVGA_CONTROL_MODE_ENABLE);
-	tmp = RREG32(AVIVO_D2VGA_CONTROL);
-	WREG32(AVIVO_D2VGA_CONTROL, tmp & ~AVIVO_DVGA_CONTROL_MODE_ENABLE);
-
-	tmp = RREG32(AVIVO_D1CRTC_CONTROL);
-	WREG32(AVIVO_D1CRTC_CONTROL, tmp & ~AVIVO_CRTC_EN);
-	tmp = RREG32(AVIVO_D2CRTC_CONTROL);
-	WREG32(AVIVO_D2CRTC_CONTROL, tmp & ~AVIVO_CRTC_EN);
-
-	/* make sure all previous write got through */
-	tmp = RREG32(AVIVO_D2CRTC_CONTROL);
-
-	mdelay(1);
-}
-
-int rs600_mc_init(struct radeon_device *rdev)
-{
-	uint32_t tmp;
-	int r;
-
-	if (r100_debugfs_rbbm_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
-	}
-
-	rs600_gpu_init(rdev);
-	rs600_gart_disable(rdev);
-
-	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
-	rdev->mc.gtt_location = 0xFFFFFFFFUL;
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	/* Program GPU memory space */
-	/* Enable bus master */
-	tmp = RREG32(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS;
-	WREG32(RADEON_BUS_CNTL, tmp);
-	/* FIXME: What does AGP means for such chipset ? */
-	WREG32_MC(RS600_MC_AGP_LOCATION, 0x0FFFFFFF);
-	/* FIXME: are this AGP reg in indirect MC range ? */
-	WREG32_MC(RS600_MC_AGP_BASE, 0);
-	WREG32_MC(RS600_MC_AGP_BASE_2, 0);
-	rs600_mc_disable_clients(rdev);
-	if (rs600_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(RS600_MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(RS600_MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(RS600_MC_FB_LOCATION, tmp);
-	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
-	return 0;
-}
-
-void rs600_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Interrupts
- */
 int rs600_irq_set(struct radeon_device *rdev)
 {
 	uint32_t tmp = 0;
 	uint32_t mode_int = 0;
 
 	if (rdev->irq.sw_int) {
-		tmp |= RADEON_SW_INT_ENABLE;
+		tmp |= S_000040_SW_INT_EN(1);
 	}
 	if (rdev->irq.crtc_vblank_int[0]) {
-		mode_int |= AVIVO_D1MODE_INT_MASK;
+		mode_int |= S_006540_D1MODE_VBLANK_INT_MASK(1);
 	}
 	if (rdev->irq.crtc_vblank_int[1]) {
-		mode_int |= AVIVO_D2MODE_INT_MASK;
+		mode_int |= S_006540_D2MODE_VBLANK_INT_MASK(1);
 	}
-	WREG32(RADEON_GEN_INT_CNTL, tmp);
-	WREG32(AVIVO_DxMODE_INT_MASK, mode_int);
+	WREG32(R_000040_GEN_INT_CNTL, tmp);
+	WREG32(R_006540_DxMODE_INT_MASK, mode_int);
 	return 0;
 }
 
 static inline uint32_t rs600_irq_ack(struct radeon_device *rdev, u32 *r500_disp_int)
 {
-	uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
-	uint32_t irq_mask = RADEON_SW_INT_TEST;
-
-	if (irqs & AVIVO_DISPLAY_INT_STATUS) {
-		*r500_disp_int = RREG32(AVIVO_DISP_INTERRUPT_STATUS);
-		if (*r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
-			WREG32(AVIVO_D1MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+	uint32_t irqs = RREG32(R_000044_GEN_INT_STATUS);
+	uint32_t irq_mask = ~C_000044_SW_INT;
+
+	if (G_000044_DISPLAY_INT_STAT(irqs)) {
+		*r500_disp_int = RREG32(R_007EDC_DISP_INTERRUPT_STATUS);
+		if (G_007EDC_LB_D1_VBLANK_INTERRUPT(*r500_disp_int)) {
+			WREG32(R_006534_D1MODE_VBLANK_STATUS,
+				S_006534_D1MODE_VBLANK_ACK(1));
 		}
-		if (*r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
-			WREG32(AVIVO_D2MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+		if (G_007EDC_LB_D2_VBLANK_INTERRUPT(*r500_disp_int)) {
+			WREG32(R_006D34_D2MODE_VBLANK_STATUS,
+				S_006D34_D2MODE_VBLANK_ACK(1));
 		}
 	} else {
 		*r500_disp_int = 0;
 	}
 
 	if (irqs) {
-		WREG32(RADEON_GEN_INT_STATUS, irqs);
+		WREG32(R_000044_GEN_INT_STATUS, irqs);
 	}
 	return irqs & irq_mask;
 }
 
+void rs600_irq_disable(struct radeon_device *rdev)
+{
+	u32 tmp;
+
+	WREG32(R_000040_GEN_INT_CNTL, 0);
+	WREG32(R_006540_DxMODE_INT_MASK, 0);
+	/* Wait and acknowledge irq */
+	mdelay(1);
+	rs600_irq_ack(rdev, &tmp);
+}
+
 int rs600_irq_process(struct radeon_device *rdev)
 {
 	uint32_t status;
@@ -319,16 +251,13 @@ int rs600_irq_process(struct radeon_device *rdev)
 	}
 	while (status || r500_disp_int) {
 		/* SW interrupt */
-		if (status & RADEON_SW_INT_TEST) {
+		if (G_000040_SW_INT_EN(status))
 			radeon_fence_process(rdev);
-		}
 		/* Vertical blank interrupts */
-		if (r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
+		if (G_007EDC_LB_D1_VBLANK_INTERRUPT(r500_disp_int))
 			drm_handle_vblank(rdev->ddev, 0);
-		}
-		if (r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
+		if (G_007EDC_LB_D2_VBLANK_INTERRUPT(r500_disp_int))
 			drm_handle_vblank(rdev->ddev, 1);
-		}
 		status = rs600_irq_ack(rdev, &r500_disp_int);
 	}
 	return IRQ_HANDLED;
@@ -337,67 +266,34 @@ int rs600_irq_process(struct radeon_device *rdev)
 u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc)
 {
 	if (crtc == 0)
-		return RREG32(AVIVO_D1CRTC_FRAME_COUNT);
+		return RREG32(R_0060A4_D1CRTC_STATUS_FRAME_COUNT);
 	else
-		return RREG32(AVIVO_D2CRTC_FRAME_COUNT);
-}
-
-
-/*
- * Global GPU functions
- */
-void rs600_disable_vga(struct radeon_device *rdev)
-{
-	unsigned tmp;
-
-	WREG32(0x330, 0);
-	WREG32(0x338, 0);
-	tmp = RREG32(0x300);
-	tmp &= ~(3 << 16);
-	WREG32(0x300, tmp);
-	WREG32(0x308, (1 << 8));
-	WREG32(0x310, rdev->mc.vram_location);
-	WREG32(0x594, 0);
+		return RREG32(R_0068A4_D2CRTC_STATUS_FRAME_COUNT);
 }
 
 int rs600_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
-	uint32_t tmp;
 
 	for (i = 0; i < rdev->usec_timeout; i++) {
-		/* read MC_STATUS */
-		tmp = RREG32_MC(RS600_MC_STATUS);
-		if (tmp & RS600_MC_STATUS_IDLE) {
+		if (G_000000_MC_IDLE(RREG32_MC(R_000000_MC_STATUS)))
 			return 0;
-		}
-		DRM_UDELAY(1);
+		udelay(1);
 	}
 	return -1;
 }
 
-void rs600_errata(struct radeon_device *rdev)
-{
-	rdev->pll_errata = 0;
-}
-
 void rs600_gpu_init(struct radeon_device *rdev)
 {
 	/* FIXME: HDP same place on rs600 ? */
 	r100_hdp_reset(rdev);
-	rs600_disable_vga(rdev);
 	/* FIXME: is this correct ? */
 	r420_pipes_init(rdev);
-	if (rs600_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
+	/* Wait for mc idle */
+	if (rs600_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
 }
 
-
-/*
- * VRAM info.
- */
 void rs600_vram_info(struct radeon_device *rdev)
 {
 	/* FIXME: to do or is these values sane ? */
@@ -410,31 +306,206 @@ void rs600_bandwidth_update(struct radeon_device *rdev)
 	/* FIXME: implement, should this be like rs690 ? */
 }
 
-
-/*
- * Indirect registers accessor
- */
 uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg)
 {
-	uint32_t r;
-
-	WREG32(RS600_MC_INDEX,
-	       ((reg & RS600_MC_ADDR_MASK) | RS600_MC_IND_CITF_ARB0));
-	r = RREG32(RS600_MC_DATA);
-	return r;
+	WREG32(R_000070_MC_IND_INDEX, S_000070_MC_IND_ADDR(reg) |
+		S_000070_MC_IND_CITF_ARB0(1));
+	return RREG32(R_000074_MC_IND_DATA);
 }
 
 void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 {
-	WREG32(RS600_MC_INDEX,
-		RS600_MC_IND_WR_EN | RS600_MC_IND_CITF_ARB0 |
-		((reg) & RS600_MC_ADDR_MASK));
-	WREG32(RS600_MC_DATA, v);
+	WREG32(R_000070_MC_IND_INDEX, S_000070_MC_IND_ADDR(reg) |
+		S_000070_MC_IND_CITF_ARB0(1) | S_000070_MC_IND_WR_EN(1));
+	WREG32(R_000074_MC_IND_DATA, v);
 }
 
-int rs600_init(struct radeon_device *rdev)
+void rs600_debugfs(struct radeon_device *rdev)
+{
+	if (r100_debugfs_rbbm_init(rdev))
+		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+}
+
+void rs600_set_safe_registers(struct radeon_device *rdev)
 {
 	rdev->config.r300.reg_safe_bm = rs600_reg_safe_bm;
 	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rs600_reg_safe_bm);
+}
+
+static void rs600_mc_program(struct radeon_device *rdev)
+{
+	struct rv515_mc_save save;
+
+	/* Stops all mc clients */
+	rv515_mc_stop(rdev, &save);
+
+	/* Wait for mc idle */
+	if (rs600_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+
+	/* FIXME: What does AGP means for such chipset ? */
+	WREG32_MC(R_000005_MC_AGP_LOCATION, 0x0FFFFFFF);
+	WREG32_MC(R_000006_AGP_BASE, 0);
+	WREG32_MC(R_000007_AGP_BASE_2, 0);
+	/* Program MC */
+	WREG32_MC(R_000004_MC_FB_LOCATION,
+			S_000004_MC_FB_START(rdev->mc.vram_start >> 16) |
+			S_000004_MC_FB_TOP(rdev->mc.vram_end >> 16));
+	WREG32(R_000134_HDP_FB_LOCATION,
+		S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+
+	rv515_mc_resume(rdev, &save);
+}
+
+static int rs600_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	rs600_mc_program(rdev);
+	/* Resume clock */
+	rv515_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	rs600_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	r = rs600_gart_enable(rdev);
+	if (r)
+		return r;
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	rs600_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int rs600_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	rs600_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	rv515_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	atom_asic_init(rdev->mode_info.atom_context);
+	/* Resume clock after posting */
+	rv515_clock_startup(rdev);
+	return rs600_startup(rdev);
+}
+
+int rs600_suspend(struct radeon_device *rdev)
+{
+	r100_cp_disable(rdev);
+	r100_wb_disable(rdev);
+	rs600_irq_disable(rdev);
+	rs600_gart_disable(rdev);
+	return 0;
+}
+
+void rs600_fini(struct radeon_device *rdev)
+{
+	rs600_suspend(rdev);
+	r100_cp_fini(rdev);
+	r100_wb_fini(rdev);
+	r100_ib_fini(rdev);
+	radeon_gem_fini(rdev);
+	rs600_gart_fini(rdev);
+	radeon_irq_kms_fini(rdev);
+	radeon_fence_driver_fini(rdev);
+	radeon_object_fini(rdev);
+	radeon_atombios_fini(rdev);
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+}
+
+int rs600_init(struct radeon_device *rdev)
+{
+	int r;
+
+	/* Disable VGA */
+	rv515_vga_render_disable(rdev);
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* BIOS */
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		r = radeon_atombios_init(rdev);
+		if (r)
+			return r;
+	} else {
+		dev_err(rdev->dev, "Expecting atombios for RS600 GPU\n");
+		return -EINVAL;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		atom_asic_init(rdev->mode_info.atom_context);
+	}
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	rs600_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r420_mc_init(rdev);
+	if (r)
+		return r;
+	rs600_debugfs(rdev);
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	r = rs600_gart_init(rdev);
+	if (r)
+		return r;
+	rs600_set_safe_registers(rdev);
+	rdev->accel_working = true;
+	r = rs600_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		rs600_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		rs600_gart_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
 	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/rs600d.h b/drivers/gpu/drm/radeon/rs600d.h
new file mode 100644
index 000000000000..81308924859a
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs600d.h
@@ -0,0 +1,470 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RS600D_H__
+#define __RS600D_H__
+
+/* Registers */
+#define R_000040_GEN_INT_CNTL                        0x000040
+#define   S_000040_DISPLAY_INT_STATUS(x)               (((x) & 0x1) << 0)
+#define   G_000040_DISPLAY_INT_STATUS(x)               (((x) >> 0) & 0x1)
+#define   C_000040_DISPLAY_INT_STATUS                  0xFFFFFFFE
+#define   S_000040_DMA_VIPH0_INT_EN(x)                 (((x) & 0x1) << 12)
+#define   G_000040_DMA_VIPH0_INT_EN(x)                 (((x) >> 12) & 0x1)
+#define   C_000040_DMA_VIPH0_INT_EN                    0xFFFFEFFF
+#define   S_000040_CRTC2_VSYNC(x)                      (((x) & 0x1) << 6)
+#define   G_000040_CRTC2_VSYNC(x)                      (((x) >> 6) & 0x1)
+#define   C_000040_CRTC2_VSYNC                         0xFFFFFFBF
+#define   S_000040_SNAPSHOT2(x)                        (((x) & 0x1) << 7)
+#define   G_000040_SNAPSHOT2(x)                        (((x) >> 7) & 0x1)
+#define   C_000040_SNAPSHOT2                           0xFFFFFF7F
+#define   S_000040_CRTC2_VBLANK(x)                     (((x) & 0x1) << 9)
+#define   G_000040_CRTC2_VBLANK(x)                     (((x) >> 9) & 0x1)
+#define   C_000040_CRTC2_VBLANK                        0xFFFFFDFF
+#define   S_000040_FP2_DETECT(x)                       (((x) & 0x1) << 10)
+#define   G_000040_FP2_DETECT(x)                       (((x) >> 10) & 0x1)
+#define   C_000040_FP2_DETECT                          0xFFFFFBFF
+#define   S_000040_VSYNC_DIFF_OVER_LIMIT(x)            (((x) & 0x1) << 11)
+#define   G_000040_VSYNC_DIFF_OVER_LIMIT(x)            (((x) >> 11) & 0x1)
+#define   C_000040_VSYNC_DIFF_OVER_LIMIT               0xFFFFF7FF
+#define   S_000040_DMA_VIPH1_INT_EN(x)                 (((x) & 0x1) << 13)
+#define   G_000040_DMA_VIPH1_INT_EN(x)                 (((x) >> 13) & 0x1)
+#define   C_000040_DMA_VIPH1_INT_EN                    0xFFFFDFFF
+#define   S_000040_DMA_VIPH2_INT_EN(x)                 (((x) & 0x1) << 14)
+#define   G_000040_DMA_VIPH2_INT_EN(x)                 (((x) >> 14) & 0x1)
+#define   C_000040_DMA_VIPH2_INT_EN                    0xFFFFBFFF
+#define   S_000040_DMA_VIPH3_INT_EN(x)                 (((x) & 0x1) << 15)
+#define   G_000040_DMA_VIPH3_INT_EN(x)                 (((x) >> 15) & 0x1)
+#define   C_000040_DMA_VIPH3_INT_EN                    0xFFFF7FFF
+#define   S_000040_I2C_INT_EN(x)                       (((x) & 0x1) << 17)
+#define   G_000040_I2C_INT_EN(x)                       (((x) >> 17) & 0x1)
+#define   C_000040_I2C_INT_EN                          0xFFFDFFFF
+#define   S_000040_GUI_IDLE(x)                         (((x) & 0x1) << 19)
+#define   G_000040_GUI_IDLE(x)                         (((x) >> 19) & 0x1)
+#define   C_000040_GUI_IDLE                            0xFFF7FFFF
+#define   S_000040_VIPH_INT_EN(x)                      (((x) & 0x1) << 24)
+#define   G_000040_VIPH_INT_EN(x)                      (((x) >> 24) & 0x1)
+#define   C_000040_VIPH_INT_EN                         0xFEFFFFFF
+#define   S_000040_SW_INT_EN(x)                        (((x) & 0x1) << 25)
+#define   G_000040_SW_INT_EN(x)                        (((x) >> 25) & 0x1)
+#define   C_000040_SW_INT_EN                           0xFDFFFFFF
+#define   S_000040_GEYSERVILLE(x)                      (((x) & 0x1) << 27)
+#define   G_000040_GEYSERVILLE(x)                      (((x) >> 27) & 0x1)
+#define   C_000040_GEYSERVILLE                         0xF7FFFFFF
+#define   S_000040_HDCP_AUTHORIZED_INT(x)              (((x) & 0x1) << 28)
+#define   G_000040_HDCP_AUTHORIZED_INT(x)              (((x) >> 28) & 0x1)
+#define   C_000040_HDCP_AUTHORIZED_INT                 0xEFFFFFFF
+#define   S_000040_DVI_I2C_INT(x)                      (((x) & 0x1) << 29)
+#define   G_000040_DVI_I2C_INT(x)                      (((x) >> 29) & 0x1)
+#define   C_000040_DVI_I2C_INT                         0xDFFFFFFF
+#define   S_000040_GUIDMA(x)                           (((x) & 0x1) << 30)
+#define   G_000040_GUIDMA(x)                           (((x) >> 30) & 0x1)
+#define   C_000040_GUIDMA                              0xBFFFFFFF
+#define   S_000040_VIDDMA(x)                           (((x) & 0x1) << 31)
+#define   G_000040_VIDDMA(x)                           (((x) >> 31) & 0x1)
+#define   C_000040_VIDDMA                              0x7FFFFFFF
+#define R_000044_GEN_INT_STATUS                      0x000044
+#define   S_000044_DISPLAY_INT_STAT(x)                 (((x) & 0x1) << 0)
+#define   G_000044_DISPLAY_INT_STAT(x)                 (((x) >> 0) & 0x1)
+#define   C_000044_DISPLAY_INT_STAT                    0xFFFFFFFE
+#define   S_000044_VGA_INT_STAT(x)                     (((x) & 0x1) << 1)
+#define   G_000044_VGA_INT_STAT(x)                     (((x) >> 1) & 0x1)
+#define   C_000044_VGA_INT_STAT                        0xFFFFFFFD
+#define   S_000044_CAP0_INT_ACTIVE(x)                  (((x) & 0x1) << 8)
+#define   G_000044_CAP0_INT_ACTIVE(x)                  (((x) >> 8) & 0x1)
+#define   C_000044_CAP0_INT_ACTIVE                     0xFFFFFEFF
+#define   S_000044_DMA_VIPH0_INT(x)                    (((x) & 0x1) << 12)
+#define   G_000044_DMA_VIPH0_INT(x)                    (((x) >> 12) & 0x1)
+#define   C_000044_DMA_VIPH0_INT                       0xFFFFEFFF
+#define   S_000044_DMA_VIPH1_INT(x)                    (((x) & 0x1) << 13)
+#define   G_000044_DMA_VIPH1_INT(x)                    (((x) >> 13) & 0x1)
+#define   C_000044_DMA_VIPH1_INT                       0xFFFFDFFF
+#define   S_000044_DMA_VIPH2_INT(x)                    (((x) & 0x1) << 14)
+#define   G_000044_DMA_VIPH2_INT(x)                    (((x) >> 14) & 0x1)
+#define   C_000044_DMA_VIPH2_INT                       0xFFFFBFFF
+#define   S_000044_DMA_VIPH3_INT(x)                    (((x) & 0x1) << 15)
+#define   G_000044_DMA_VIPH3_INT(x)                    (((x) >> 15) & 0x1)
+#define   C_000044_DMA_VIPH3_INT                       0xFFFF7FFF
+#define   S_000044_MC_PROBE_FAULT_STAT(x)              (((x) & 0x1) << 16)
+#define   G_000044_MC_PROBE_FAULT_STAT(x)              (((x) >> 16) & 0x1)
+#define   C_000044_MC_PROBE_FAULT_STAT                 0xFFFEFFFF
+#define   S_000044_I2C_INT(x)                          (((x) & 0x1) << 17)
+#define   G_000044_I2C_INT(x)                          (((x) >> 17) & 0x1)
+#define   C_000044_I2C_INT                             0xFFFDFFFF
+#define   S_000044_SCRATCH_INT_STAT(x)                 (((x) & 0x1) << 18)
+#define   G_000044_SCRATCH_INT_STAT(x)                 (((x) >> 18) & 0x1)
+#define   C_000044_SCRATCH_INT_STAT                    0xFFFBFFFF
+#define   S_000044_GUI_IDLE_STAT(x)                    (((x) & 0x1) << 19)
+#define   G_000044_GUI_IDLE_STAT(x)                    (((x) >> 19) & 0x1)
+#define   C_000044_GUI_IDLE_STAT                       0xFFF7FFFF
+#define   S_000044_ATI_OVERDRIVE_INT_STAT(x)           (((x) & 0x1) << 20)
+#define   G_000044_ATI_OVERDRIVE_INT_STAT(x)           (((x) >> 20) & 0x1)
+#define   C_000044_ATI_OVERDRIVE_INT_STAT              0xFFEFFFFF
+#define   S_000044_MC_PROTECTION_FAULT_STAT(x)         (((x) & 0x1) << 21)
+#define   G_000044_MC_PROTECTION_FAULT_STAT(x)         (((x) >> 21) & 0x1)
+#define   C_000044_MC_PROTECTION_FAULT_STAT            0xFFDFFFFF
+#define   S_000044_RBBM_READ_INT_STAT(x)               (((x) & 0x1) << 22)
+#define   G_000044_RBBM_READ_INT_STAT(x)               (((x) >> 22) & 0x1)
+#define   C_000044_RBBM_READ_INT_STAT                  0xFFBFFFFF
+#define   S_000044_CB_CONTEXT_SWITCH_STAT(x)           (((x) & 0x1) << 23)
+#define   G_000044_CB_CONTEXT_SWITCH_STAT(x)           (((x) >> 23) & 0x1)
+#define   C_000044_CB_CONTEXT_SWITCH_STAT              0xFF7FFFFF
+#define   S_000044_VIPH_INT(x)                         (((x) & 0x1) << 24)
+#define   G_000044_VIPH_INT(x)                         (((x) >> 24) & 0x1)
+#define   C_000044_VIPH_INT                            0xFEFFFFFF
+#define   S_000044_SW_INT(x)                           (((x) & 0x1) << 25)
+#define   G_000044_SW_INT(x)                           (((x) >> 25) & 0x1)
+#define   C_000044_SW_INT                              0xFDFFFFFF
+#define   S_000044_SW_INT_SET(x)                       (((x) & 0x1) << 26)
+#define   G_000044_SW_INT_SET(x)                       (((x) >> 26) & 0x1)
+#define   C_000044_SW_INT_SET                          0xFBFFFFFF
+#define   S_000044_IDCT_INT_STAT(x)                    (((x) & 0x1) << 27)
+#define   G_000044_IDCT_INT_STAT(x)                    (((x) >> 27) & 0x1)
+#define   C_000044_IDCT_INT_STAT                       0xF7FFFFFF
+#define   S_000044_GUIDMA_STAT(x)                      (((x) & 0x1) << 30)
+#define   G_000044_GUIDMA_STAT(x)                      (((x) >> 30) & 0x1)
+#define   C_000044_GUIDMA_STAT                         0xBFFFFFFF
+#define   S_000044_VIDDMA_STAT(x)                      (((x) & 0x1) << 31)
+#define   G_000044_VIDDMA_STAT(x)                      (((x) >> 31) & 0x1)
+#define   C_000044_VIDDMA_STAT                         0x7FFFFFFF
+#define R_00004C_BUS_CNTL                            0x00004C
+#define   S_00004C_BUS_MASTER_DIS(x)                   (((x) & 0x1) << 14)
+#define   G_00004C_BUS_MASTER_DIS(x)                   (((x) >> 14) & 0x1)
+#define   C_00004C_BUS_MASTER_DIS                      0xFFFFBFFF
+#define   S_00004C_BUS_MSI_REARM(x)                    (((x) & 0x1) << 20)
+#define   G_00004C_BUS_MSI_REARM(x)                    (((x) >> 20) & 0x1)
+#define   C_00004C_BUS_MSI_REARM                       0xFFEFFFFF
+#define R_000070_MC_IND_INDEX                        0x000070
+#define   S_000070_MC_IND_ADDR(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000070_MC_IND_ADDR(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000070_MC_IND_ADDR                         0xFFFF0000
+#define   S_000070_MC_IND_SEQ_RBS_0(x)                 (((x) & 0x1) << 16)
+#define   G_000070_MC_IND_SEQ_RBS_0(x)                 (((x) >> 16) & 0x1)
+#define   C_000070_MC_IND_SEQ_RBS_0                    0xFFFEFFFF
+#define   S_000070_MC_IND_SEQ_RBS_1(x)                 (((x) & 0x1) << 17)
+#define   G_000070_MC_IND_SEQ_RBS_1(x)                 (((x) >> 17) & 0x1)
+#define   C_000070_MC_IND_SEQ_RBS_1                    0xFFFDFFFF
+#define   S_000070_MC_IND_SEQ_RBS_2(x)                 (((x) & 0x1) << 18)
+#define   G_000070_MC_IND_SEQ_RBS_2(x)                 (((x) >> 18) & 0x1)
+#define   C_000070_MC_IND_SEQ_RBS_2                    0xFFFBFFFF
+#define   S_000070_MC_IND_SEQ_RBS_3(x)                 (((x) & 0x1) << 19)
+#define   G_000070_MC_IND_SEQ_RBS_3(x)                 (((x) >> 19) & 0x1)
+#define   C_000070_MC_IND_SEQ_RBS_3                    0xFFF7FFFF
+#define   S_000070_MC_IND_AIC_RBS(x)                   (((x) & 0x1) << 20)
+#define   G_000070_MC_IND_AIC_RBS(x)                   (((x) >> 20) & 0x1)
+#define   C_000070_MC_IND_AIC_RBS                      0xFFEFFFFF
+#define   S_000070_MC_IND_CITF_ARB0(x)                 (((x) & 0x1) << 21)
+#define   G_000070_MC_IND_CITF_ARB0(x)                 (((x) >> 21) & 0x1)
+#define   C_000070_MC_IND_CITF_ARB0                    0xFFDFFFFF
+#define   S_000070_MC_IND_CITF_ARB1(x)                 (((x) & 0x1) << 22)
+#define   G_000070_MC_IND_CITF_ARB1(x)                 (((x) >> 22) & 0x1)
+#define   C_000070_MC_IND_CITF_ARB1                    0xFFBFFFFF
+#define   S_000070_MC_IND_WR_EN(x)                     (((x) & 0x1) << 23)
+#define   G_000070_MC_IND_WR_EN(x)                     (((x) >> 23) & 0x1)
+#define   C_000070_MC_IND_WR_EN                        0xFF7FFFFF
+#define   S_000070_MC_IND_RD_INV(x)                    (((x) & 0x1) << 24)
+#define   G_000070_MC_IND_RD_INV(x)                    (((x) >> 24) & 0x1)
+#define   C_000070_MC_IND_RD_INV                       0xFEFFFFFF
+#define R_000074_MC_IND_DATA                         0x000074
+#define   S_000074_MC_IND_DATA(x)                      (((x) & 0xFFFFFFFF) << 0)
+#define   G_000074_MC_IND_DATA(x)                      (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000074_MC_IND_DATA                         0x00000000
+#define R_000134_HDP_FB_LOCATION                     0x000134
+#define   S_000134_HDP_FB_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000134_HDP_FB_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000134_HDP_FB_START                        0xFFFF0000
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
+#define R_0060A4_D1CRTC_STATUS_FRAME_COUNT           0x0060A4
+#define   S_0060A4_D1CRTC_FRAME_COUNT(x)               (((x) & 0xFFFFFF) << 0)
+#define   G_0060A4_D1CRTC_FRAME_COUNT(x)               (((x) >> 0) & 0xFFFFFF)
+#define   C_0060A4_D1CRTC_FRAME_COUNT                  0xFF000000
+#define R_006534_D1MODE_VBLANK_STATUS                0x006534
+#define   S_006534_D1MODE_VBLANK_OCCURRED(x)           (((x) & 0x1) << 0)
+#define   G_006534_D1MODE_VBLANK_OCCURRED(x)           (((x) >> 0) & 0x1)
+#define   C_006534_D1MODE_VBLANK_OCCURRED              0xFFFFFFFE
+#define   S_006534_D1MODE_VBLANK_ACK(x)                (((x) & 0x1) << 4)
+#define   G_006534_D1MODE_VBLANK_ACK(x)                (((x) >> 4) & 0x1)
+#define   C_006534_D1MODE_VBLANK_ACK                   0xFFFFFFEF
+#define   S_006534_D1MODE_VBLANK_STAT(x)               (((x) & 0x1) << 12)
+#define   G_006534_D1MODE_VBLANK_STAT(x)               (((x) >> 12) & 0x1)
+#define   C_006534_D1MODE_VBLANK_STAT                  0xFFFFEFFF
+#define   S_006534_D1MODE_VBLANK_INTERRUPT(x)          (((x) & 0x1) << 16)
+#define   G_006534_D1MODE_VBLANK_INTERRUPT(x)          (((x) >> 16) & 0x1)
+#define   C_006534_D1MODE_VBLANK_INTERRUPT             0xFFFEFFFF
+#define R_006540_DxMODE_INT_MASK                     0x006540
+#define   S_006540_D1MODE_VBLANK_INT_MASK(x)           (((x) & 0x1) << 0)
+#define   G_006540_D1MODE_VBLANK_INT_MASK(x)           (((x) >> 0) & 0x1)
+#define   C_006540_D1MODE_VBLANK_INT_MASK              0xFFFFFFFE
+#define   S_006540_D1MODE_VLINE_INT_MASK(x)            (((x) & 0x1) << 4)
+#define   G_006540_D1MODE_VLINE_INT_MASK(x)            (((x) >> 4) & 0x1)
+#define   C_006540_D1MODE_VLINE_INT_MASK               0xFFFFFFEF
+#define   S_006540_D2MODE_VBLANK_INT_MASK(x)           (((x) & 0x1) << 8)
+#define   G_006540_D2MODE_VBLANK_INT_MASK(x)           (((x) >> 8) & 0x1)
+#define   C_006540_D2MODE_VBLANK_INT_MASK              0xFFFFFEFF
+#define   S_006540_D2MODE_VLINE_INT_MASK(x)            (((x) & 0x1) << 12)
+#define   G_006540_D2MODE_VLINE_INT_MASK(x)            (((x) >> 12) & 0x1)
+#define   C_006540_D2MODE_VLINE_INT_MASK               0xFFFFEFFF
+#define   S_006540_D1MODE_VBLANK_CP_SEL(x)             (((x) & 0x1) << 30)
+#define   G_006540_D1MODE_VBLANK_CP_SEL(x)             (((x) >> 30) & 0x1)
+#define   C_006540_D1MODE_VBLANK_CP_SEL                0xBFFFFFFF
+#define   S_006540_D2MODE_VBLANK_CP_SEL(x)             (((x) & 0x1) << 31)
+#define   G_006540_D2MODE_VBLANK_CP_SEL(x)             (((x) >> 31) & 0x1)
+#define   C_006540_D2MODE_VBLANK_CP_SEL                0x7FFFFFFF
+#define R_0068A4_D2CRTC_STATUS_FRAME_COUNT           0x0068A4
+#define   S_0068A4_D2CRTC_FRAME_COUNT(x)               (((x) & 0xFFFFFF) << 0)
+#define   G_0068A4_D2CRTC_FRAME_COUNT(x)               (((x) >> 0) & 0xFFFFFF)
+#define   C_0068A4_D2CRTC_FRAME_COUNT                  0xFF000000
+#define R_006D34_D2MODE_VBLANK_STATUS                0x006D34
+#define   S_006D34_D2MODE_VBLANK_OCCURRED(x)           (((x) & 0x1) << 0)
+#define   G_006D34_D2MODE_VBLANK_OCCURRED(x)           (((x) >> 0) & 0x1)
+#define   C_006D34_D2MODE_VBLANK_OCCURRED              0xFFFFFFFE
+#define   S_006D34_D2MODE_VBLANK_ACK(x)                (((x) & 0x1) << 4)
+#define   G_006D34_D2MODE_VBLANK_ACK(x)                (((x) >> 4) & 0x1)
+#define   C_006D34_D2MODE_VBLANK_ACK                   0xFFFFFFEF
+#define   S_006D34_D2MODE_VBLANK_STAT(x)               (((x) & 0x1) << 12)
+#define   G_006D34_D2MODE_VBLANK_STAT(x)               (((x) >> 12) & 0x1)
+#define   C_006D34_D2MODE_VBLANK_STAT                  0xFFFFEFFF
+#define   S_006D34_D2MODE_VBLANK_INTERRUPT(x)          (((x) & 0x1) << 16)
+#define   G_006D34_D2MODE_VBLANK_INTERRUPT(x)          (((x) >> 16) & 0x1)
+#define   C_006D34_D2MODE_VBLANK_INTERRUPT             0xFFFEFFFF
+#define R_007EDC_DISP_INTERRUPT_STATUS               0x007EDC
+#define   S_007EDC_LB_D1_VBLANK_INTERRUPT(x)           (((x) & 0x1) << 4)
+#define   G_007EDC_LB_D1_VBLANK_INTERRUPT(x)           (((x) >> 4) & 0x1)
+#define   C_007EDC_LB_D1_VBLANK_INTERRUPT              0xFFFFFFEF
+#define   S_007EDC_LB_D2_VBLANK_INTERRUPT(x)           (((x) & 0x1) << 5)
+#define   G_007EDC_LB_D2_VBLANK_INTERRUPT(x)           (((x) >> 5) & 0x1)
+#define   C_007EDC_LB_D2_VBLANK_INTERRUPT              0xFFFFFFDF
+
+
+/* MC registers */
+#define R_000000_MC_STATUS                           0x000000
+#define   S_000000_MC_IDLE(x)                          (((x) & 0x1) << 0)
+#define   G_000000_MC_IDLE(x)                          (((x) >> 0) & 0x1)
+#define   C_000000_MC_IDLE                             0xFFFFFFFE
+#define R_000004_MC_FB_LOCATION                      0x000004
+#define   S_000004_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000004_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000004_MC_FB_START                         0xFFFF0000
+#define   S_000004_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000004_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000004_MC_FB_TOP                           0x0000FFFF
+#define R_000005_MC_AGP_LOCATION                     0x000005
+#define   S_000005_MC_AGP_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000005_MC_AGP_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000005_MC_AGP_START                        0xFFFF0000
+#define   S_000005_MC_AGP_TOP(x)                       (((x) & 0xFFFF) << 16)
+#define   G_000005_MC_AGP_TOP(x)                       (((x) >> 16) & 0xFFFF)
+#define   C_000005_MC_AGP_TOP                          0x0000FFFF
+#define R_000006_AGP_BASE                            0x000006
+#define   S_000006_AGP_BASE_ADDR(x)                    (((x) & 0xFFFFFFFF) << 0)
+#define   G_000006_AGP_BASE_ADDR(x)                    (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000006_AGP_BASE_ADDR                       0x00000000
+#define R_000007_AGP_BASE_2                          0x000007
+#define   S_000007_AGP_BASE_ADDR_2(x)                  (((x) & 0xF) << 0)
+#define   G_000007_AGP_BASE_ADDR_2(x)                  (((x) >> 0) & 0xF)
+#define   C_000007_AGP_BASE_ADDR_2                     0xFFFFFFF0
+#define R_000009_MC_CNTL1                            0x000009
+#define   S_000009_ENABLE_PAGE_TABLES(x)               (((x) & 0x1) << 26)
+#define   G_000009_ENABLE_PAGE_TABLES(x)               (((x) >> 26) & 0x1)
+#define   C_000009_ENABLE_PAGE_TABLES                  0xFBFFFFFF
+/* FIXME don't know the various field size need feedback from AMD */
+#define R_000100_MC_PT0_CNTL                         0x000100
+#define   S_000100_ENABLE_PT(x)                        (((x) & 0x1) << 0)
+#define   G_000100_ENABLE_PT(x)                        (((x) >> 0) & 0x1)
+#define   C_000100_ENABLE_PT                           0xFFFFFFFE
+#define   S_000100_EFFECTIVE_L2_CACHE_SIZE(x)          (((x) & 0x7) << 15)
+#define   G_000100_EFFECTIVE_L2_CACHE_SIZE(x)          (((x) >> 15) & 0x7)
+#define   C_000100_EFFECTIVE_L2_CACHE_SIZE             0xFFFC7FFF
+#define   S_000100_EFFECTIVE_L2_QUEUE_SIZE(x)          (((x) & 0x7) << 21)
+#define   G_000100_EFFECTIVE_L2_QUEUE_SIZE(x)          (((x) >> 21) & 0x7)
+#define   C_000100_EFFECTIVE_L2_QUEUE_SIZE             0xFF1FFFFF
+#define   S_000100_INVALIDATE_ALL_L1_TLBS(x)           (((x) & 0x1) << 28)
+#define   G_000100_INVALIDATE_ALL_L1_TLBS(x)           (((x) >> 28) & 0x1)
+#define   C_000100_INVALIDATE_ALL_L1_TLBS              0xEFFFFFFF
+#define   S_000100_INVALIDATE_L2_CACHE(x)              (((x) & 0x1) << 29)
+#define   G_000100_INVALIDATE_L2_CACHE(x)              (((x) >> 29) & 0x1)
+#define   C_000100_INVALIDATE_L2_CACHE                 0xDFFFFFFF
+#define R_000102_MC_PT0_CONTEXT0_CNTL                0x000102
+#define   S_000102_ENABLE_PAGE_TABLE(x)                (((x) & 0x1) << 0)
+#define   G_000102_ENABLE_PAGE_TABLE(x)                (((x) >> 0) & 0x1)
+#define   C_000102_ENABLE_PAGE_TABLE                   0xFFFFFFFE
+#define   S_000102_PAGE_TABLE_DEPTH(x)                 (((x) & 0x3) << 1)
+#define   G_000102_PAGE_TABLE_DEPTH(x)                 (((x) >> 1) & 0x3)
+#define   C_000102_PAGE_TABLE_DEPTH                    0xFFFFFFF9
+#define   V_000102_PAGE_TABLE_FLAT                     0
+/* R600 documentation suggest that this should be a number of pages */
+#define R_000112_MC_PT0_SYSTEM_APERTURE_LOW_ADDR     0x000112
+#define R_000114_MC_PT0_SYSTEM_APERTURE_HIGH_ADDR    0x000114
+#define R_00011C_MC_PT0_CONTEXT0_DEFAULT_READ_ADDR   0x00011C
+#define R_00012C_MC_PT0_CONTEXT0_FLAT_BASE_ADDR      0x00012C
+#define R_00013C_MC_PT0_CONTEXT0_FLAT_START_ADDR     0x00013C
+#define R_00014C_MC_PT0_CONTEXT0_FLAT_END_ADDR       0x00014C
+#define R_00016C_MC_PT0_CLIENT0_CNTL                 0x00016C
+#define   S_00016C_ENABLE_TRANSLATION_MODE_OVERRIDE(x) (((x) & 0x1) << 0)
+#define   G_00016C_ENABLE_TRANSLATION_MODE_OVERRIDE(x) (((x) >> 0) & 0x1)
+#define   C_00016C_ENABLE_TRANSLATION_MODE_OVERRIDE    0xFFFFFFFE
+#define   S_00016C_TRANSLATION_MODE_OVERRIDE(x)        (((x) & 0x1) << 1)
+#define   G_00016C_TRANSLATION_MODE_OVERRIDE(x)        (((x) >> 1) & 0x1)
+#define   C_00016C_TRANSLATION_MODE_OVERRIDE           0xFFFFFFFD
+#define   S_00016C_SYSTEM_ACCESS_MODE_MASK(x)          (((x) & 0x3) << 8)
+#define   G_00016C_SYSTEM_ACCESS_MODE_MASK(x)          (((x) >> 8) & 0x3)
+#define   C_00016C_SYSTEM_ACCESS_MODE_MASK             0xFFFFFCFF
+#define   V_00016C_SYSTEM_ACCESS_MODE_PA_ONLY          0
+#define   V_00016C_SYSTEM_ACCESS_MODE_USE_SYS_MAP      1
+#define   V_00016C_SYSTEM_ACCESS_MODE_IN_SYS           2
+#define   V_00016C_SYSTEM_ACCESS_MODE_NOT_IN_SYS       3
+#define   S_00016C_SYSTEM_APERTURE_UNMAPPED_ACCESS(x)  (((x) & 0x1) << 10)
+#define   G_00016C_SYSTEM_APERTURE_UNMAPPED_ACCESS(x)  (((x) >> 10) & 0x1)
+#define   C_00016C_SYSTEM_APERTURE_UNMAPPED_ACCESS     0xFFFFFBFF
+#define   V_00016C_SYSTEM_APERTURE_UNMAPPED_PASSTHROUGH  0
+#define   V_00016C_SYSTEM_APERTURE_UNMAPPED_DEFAULT_PAGE 1
+#define   S_00016C_EFFECTIVE_L1_CACHE_SIZE(x)          (((x) & 0x7) << 11)
+#define   G_00016C_EFFECTIVE_L1_CACHE_SIZE(x)          (((x) >> 11) & 0x7)
+#define   C_00016C_EFFECTIVE_L1_CACHE_SIZE             0xFFFFC7FF
+#define   S_00016C_ENABLE_FRAGMENT_PROCESSING(x)       (((x) & 0x1) << 14)
+#define   G_00016C_ENABLE_FRAGMENT_PROCESSING(x)       (((x) >> 14) & 0x1)
+#define   C_00016C_ENABLE_FRAGMENT_PROCESSING          0xFFFFBFFF
+#define   S_00016C_EFFECTIVE_L1_QUEUE_SIZE(x)          (((x) & 0x7) << 15)
+#define   G_00016C_EFFECTIVE_L1_QUEUE_SIZE(x)          (((x) >> 15) & 0x7)
+#define   C_00016C_EFFECTIVE_L1_QUEUE_SIZE             0xFFFC7FFF
+#define   S_00016C_INVALIDATE_L1_TLB(x)                (((x) & 0x1) << 20)
+#define   G_00016C_INVALIDATE_L1_TLB(x)                (((x) >> 20) & 0x1)
+#define   C_00016C_INVALIDATE_L1_TLB                   0xFFEFFFFF
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 0f585ca8276d..025e3225346c 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -26,106 +26,29 @@
  *          Jerome Glisse
  */
 #include "drmP.h"
-#include "radeon_reg.h"
 #include "radeon.h"
-#include "rs690r.h"
 #include "atom.h"
-#include "atom-bits.h"
-
-/* rs690,rs740 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r300_mc_wait_for_idle(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs400_gart_disable(struct radeon_device *rdev);
-int rs400_gart_enable(struct radeon_device *rdev);
-void rs400_gart_adjust_size(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-
-/* This files gather functions specifics to :
- * rs690,rs740
- *
- * Some of these functions might be used by newer ASICs.
- */
-void rs690_gpu_init(struct radeon_device *rdev);
-int rs690_mc_wait_for_idle(struct radeon_device *rdev);
-
+#include "rs690d.h"
 
-/*
- * MC functions.
- */
-int rs690_mc_init(struct radeon_device *rdev)
-{
-	uint32_t tmp;
-	int r;
-
-	if (r100_debugfs_rbbm_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
-	}
-
-	rs690_gpu_init(rdev);
-	rs400_gart_disable(rdev);
-
-	/* Setup GPU memory space */
-	rdev->mc.gtt_location = rdev->mc.mc_vram_size;
-	rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
-	rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	/* Program GPU memory space */
-	rs600_mc_disable_clients(rdev);
-	if (rs690_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(RS690_MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(RS690_MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(RS690_MCCFG_FB_LOCATION, tmp);
-	/* FIXME: Does this reg exist on RS480,RS740 ? */
-	WREG32(0x310, rdev->mc.vram_location);
-	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
-	return 0;
-}
-
-void rs690_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
-int rs690_mc_wait_for_idle(struct radeon_device *rdev)
+static int rs690_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
 	uint32_t tmp;
 
 	for (i = 0; i < rdev->usec_timeout; i++) {
 		/* read MC_STATUS */
-		tmp = RREG32_MC(RS690_MC_STATUS);
-		if (tmp & RS690_MC_STATUS_IDLE) {
+		tmp = RREG32_MC(R_000090_MC_SYSTEM_STATUS);
+		if (G_000090_MC_SYSTEM_IDLE(tmp))
 			return 0;
-		}
-		DRM_UDELAY(1);
+		udelay(1);
 	}
 	return -1;
 }
 
-void rs690_errata(struct radeon_device *rdev)
-{
-	rdev->pll_errata = 0;
-}
-
-void rs690_gpu_init(struct radeon_device *rdev)
+static void rs690_gpu_init(struct radeon_device *rdev)
 {
 	/* FIXME: HDP same place on rs690 ? */
 	r100_hdp_reset(rdev);
-	rs600_disable_vga(rdev);
 	/* FIXME: is this correct ? */
 	r420_pipes_init(rdev);
 	if (rs690_mc_wait_for_idle(rdev)) {
@@ -134,10 +57,6 @@ void rs690_gpu_init(struct radeon_device *rdev)
 	}
 }
 
-
-/*
- * VRAM info.
- */
 void rs690_pm_info(struct radeon_device *rdev)
 {
 	int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
@@ -251,39 +170,39 @@ void rs690_line_buffer_adjust(struct radeon_device *rdev,
 	/*
 	 * Line Buffer Setup
 	 * There is a single line buffer shared by both display controllers.
-	 * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between
+	 * R_006520_DC_LB_MEMORY_SPLIT controls how that line buffer is shared between
 	 * the display controllers.  The paritioning can either be done
 	 * manually or via one of four preset allocations specified in bits 1:0:
 	 *  0 - line buffer is divided in half and shared between crtc
 	 *  1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
 	 *  2 - D1 gets the whole buffer
 	 *  3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
-	 * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual
+	 * Setting bit 2 of R_006520_DC_LB_MEMORY_SPLIT controls switches to manual
 	 * allocation mode. In manual allocation mode, D1 always starts at 0,
 	 * D1 end/2 is specified in bits 14:4; D2 allocation follows D1.
 	 */
-	tmp = RREG32(DC_LB_MEMORY_SPLIT) & ~DC_LB_MEMORY_SPLIT_MASK;
-	tmp &= ~DC_LB_MEMORY_SPLIT_SHIFT_MODE;
+	tmp = RREG32(R_006520_DC_LB_MEMORY_SPLIT) & C_006520_DC_LB_MEMORY_SPLIT;
+	tmp &= ~C_006520_DC_LB_MEMORY_SPLIT_MODE;
 	/* auto */
 	if (mode1 && mode2) {
 		if (mode1->hdisplay > mode2->hdisplay) {
 			if (mode1->hdisplay > 2560)
-				tmp |= DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
+				tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
 			else
-				tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+				tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
 		} else if (mode2->hdisplay > mode1->hdisplay) {
 			if (mode2->hdisplay > 2560)
-				tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+				tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
 			else
-				tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+				tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
 		} else
-			tmp |= AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+			tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
 	} else if (mode1) {
-		tmp |= DC_LB_MEMORY_SPLIT_D1_ONLY;
+		tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1_ONLY;
 	} else if (mode2) {
-		tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+		tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
 	}
-	WREG32(DC_LB_MEMORY_SPLIT, tmp);
+	WREG32(R_006520_DC_LB_MEMORY_SPLIT, tmp);
 }
 
 struct rs690_watermark {
@@ -488,28 +407,28 @@ void rs690_bandwidth_update(struct radeon_device *rdev)
 	 * option.
 	 */
 	if (rdev->disp_priority == 2) {
-		tmp = RREG32_MC(MC_INIT_MISC_LAT_TIMER);
-		tmp &= ~MC_DISP1R_INIT_LAT_MASK;
-		tmp &= ~MC_DISP0R_INIT_LAT_MASK;
-		if (mode1)
-			tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+		tmp = RREG32_MC(R_000104_MC_INIT_MISC_LAT_TIMER);
+		tmp &= C_000104_MC_DISP0R_INIT_LAT;
+		tmp &= C_000104_MC_DISP1R_INIT_LAT;
 		if (mode0)
-			tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
-		WREG32_MC(MC_INIT_MISC_LAT_TIMER, tmp);
+			tmp |= S_000104_MC_DISP0R_INIT_LAT(1);
+		if (mode1)
+			tmp |= S_000104_MC_DISP1R_INIT_LAT(1);
+		WREG32_MC(R_000104_MC_INIT_MISC_LAT_TIMER, tmp);
 	}
 	rs690_line_buffer_adjust(rdev, mode0, mode1);
 
 	if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740))
-		WREG32(DCP_CONTROL, 0);
+		WREG32(R_006C9C_DCP_CONTROL, 0);
 	if ((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880))
-		WREG32(DCP_CONTROL, 2);
+		WREG32(R_006C9C_DCP_CONTROL, 2);
 
 	rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
 	rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
 
 	tmp = (wm0.lb_request_fifo_depth - 1);
 	tmp |= (wm1.lb_request_fifo_depth - 1) << 16;
-	WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+	WREG32(R_006D58_LB_MAX_REQ_OUTSTANDING, tmp);
 
 	if (mode0 && mode1) {
 		if (rfixed_trunc(wm0.dbpp) > 64)
@@ -562,10 +481,10 @@ void rs690_bandwidth_update(struct radeon_device *rdev)
 			priority_mark12.full = 0;
 		if (wm1.priority_mark_max.full > priority_mark12.full)
 			priority_mark12.full = wm1.priority_mark_max.full;
-		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
-		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
-		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
-		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+		WREG32(R_006548_D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
 	} else if (mode0) {
 		if (rfixed_trunc(wm0.dbpp) > 64)
 			a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
@@ -592,10 +511,12 @@ void rs690_bandwidth_update(struct radeon_device *rdev)
 			priority_mark02.full = 0;
 		if (wm0.priority_mark_max.full > priority_mark02.full)
 			priority_mark02.full = wm0.priority_mark_max.full;
-		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
-		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
-		WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
-		WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+		WREG32(R_006548_D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(R_006D48_D2MODE_PRIORITY_A_CNT,
+			S_006D48_D2MODE_PRIORITY_A_OFF(1));
+		WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT,
+			S_006D4C_D2MODE_PRIORITY_B_OFF(1));
 	} else {
 		if (rfixed_trunc(wm1.dbpp) > 64)
 			a.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
@@ -622,30 +543,203 @@ void rs690_bandwidth_update(struct radeon_device *rdev)
 			priority_mark12.full = 0;
 		if (wm1.priority_mark_max.full > priority_mark12.full)
 			priority_mark12.full = wm1.priority_mark_max.full;
-		WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
-		WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
-		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
-		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+		WREG32(R_006548_D1MODE_PRIORITY_A_CNT,
+			S_006548_D1MODE_PRIORITY_A_OFF(1));
+		WREG32(R_00654C_D1MODE_PRIORITY_B_CNT,
+			S_00654C_D1MODE_PRIORITY_B_OFF(1));
+		WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
 	}
 }
 
-/*
- * Indirect registers accessor
- */
 uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg)
 {
 	uint32_t r;
 
-	WREG32(RS690_MC_INDEX, (reg & RS690_MC_INDEX_MASK));
-	r = RREG32(RS690_MC_DATA);
-	WREG32(RS690_MC_INDEX, RS690_MC_INDEX_MASK);
+	WREG32(R_000078_MC_INDEX, S_000078_MC_IND_ADDR(reg));
+	r = RREG32(R_00007C_MC_DATA);
+	WREG32(R_000078_MC_INDEX, ~C_000078_MC_IND_ADDR);
 	return r;
 }
 
 void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 {
-	WREG32(RS690_MC_INDEX,
-	       RS690_MC_INDEX_WR_EN | ((reg) & RS690_MC_INDEX_MASK));
-	WREG32(RS690_MC_DATA, v);
-	WREG32(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK);
+	WREG32(R_000078_MC_INDEX, S_000078_MC_IND_ADDR(reg) |
+		S_000078_MC_IND_WR_EN(1));
+	WREG32(R_00007C_MC_DATA, v);
+	WREG32(R_000078_MC_INDEX, 0x7F);
+}
+
+void rs690_mc_program(struct radeon_device *rdev)
+{
+	struct rv515_mc_save save;
+
+	/* Stops all mc clients */
+	rv515_mc_stop(rdev, &save);
+
+	/* Wait for mc idle */
+	if (rs690_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+	/* Program MC, should be a 32bits limited address space */
+	WREG32_MC(R_000100_MCCFG_FB_LOCATION,
+			S_000100_MC_FB_START(rdev->mc.vram_start >> 16) |
+			S_000100_MC_FB_TOP(rdev->mc.vram_end >> 16));
+	WREG32(R_000134_HDP_FB_LOCATION,
+		S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+
+	rv515_mc_resume(rdev, &save);
+}
+
+static int rs690_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	rs690_mc_program(rdev);
+	/* Resume clock */
+	rv515_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	rs690_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	r = rs400_gart_enable(rdev);
+	if (r)
+		return r;
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	rs600_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int rs690_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	rs400_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	rv515_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	atom_asic_init(rdev->mode_info.atom_context);
+	/* Resume clock after posting */
+	rv515_clock_startup(rdev);
+	return rs690_startup(rdev);
+}
+
+int rs690_suspend(struct radeon_device *rdev)
+{
+	r100_cp_disable(rdev);
+	r100_wb_disable(rdev);
+	rs600_irq_disable(rdev);
+	rs400_gart_disable(rdev);
+	return 0;
+}
+
+void rs690_fini(struct radeon_device *rdev)
+{
+	rs690_suspend(rdev);
+	r100_cp_fini(rdev);
+	r100_wb_fini(rdev);
+	r100_ib_fini(rdev);
+	radeon_gem_fini(rdev);
+	rs400_gart_fini(rdev);
+	radeon_irq_kms_fini(rdev);
+	radeon_fence_driver_fini(rdev);
+	radeon_object_fini(rdev);
+	radeon_atombios_fini(rdev);
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+}
+
+int rs690_init(struct radeon_device *rdev)
+{
+	int r;
+
+	/* Disable VGA */
+	rv515_vga_render_disable(rdev);
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		r = radeon_atombios_init(rdev);
+		if (r)
+			return r;
+	} else {
+		dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+		return -EINVAL;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		atom_asic_init(rdev->mode_info.atom_context);
+	}
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	rs690_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r420_mc_init(rdev);
+	if (r)
+		return r;
+	rv515_debugfs(rdev);
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	r = rs400_gart_init(rdev);
+	if (r)
+		return r;
+	rs600_set_safe_registers(rdev);
+	rdev->accel_working = true;
+	r = rs690_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		rs690_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		rs400_gart_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
+	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/rs690d.h b/drivers/gpu/drm/radeon/rs690d.h
new file mode 100644
index 000000000000..62d31e7a897f
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs690d.h
@@ -0,0 +1,307 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RS690D_H__
+#define __RS690D_H__
+
+/* Registers */
+#define R_000078_MC_INDEX                            0x000078
+#define   S_000078_MC_IND_ADDR(x)                      (((x) & 0x1FF) << 0)
+#define   G_000078_MC_IND_ADDR(x)                      (((x) >> 0) & 0x1FF)
+#define   C_000078_MC_IND_ADDR                         0xFFFFFE00
+#define   S_000078_MC_IND_WR_EN(x)                     (((x) & 0x1) << 9)
+#define   G_000078_MC_IND_WR_EN(x)                     (((x) >> 9) & 0x1)
+#define   C_000078_MC_IND_WR_EN                        0xFFFFFDFF
+#define R_00007C_MC_DATA                             0x00007C
+#define   S_00007C_MC_DATA(x)                          (((x) & 0xFFFFFFFF) << 0)
+#define   G_00007C_MC_DATA(x)                          (((x) >> 0) & 0xFFFFFFFF)
+#define   C_00007C_MC_DATA                             0x00000000
+#define R_0000F8_CONFIG_MEMSIZE                      0x0000F8
+#define   S_0000F8_CONFIG_MEMSIZE(x)                   (((x) & 0xFFFFFFFF) << 0)
+#define   G_0000F8_CONFIG_MEMSIZE(x)                   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_0000F8_CONFIG_MEMSIZE                      0x00000000
+#define R_000134_HDP_FB_LOCATION                     0x000134
+#define   S_000134_HDP_FB_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000134_HDP_FB_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000134_HDP_FB_START                        0xFFFF0000
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
+#define R_006520_DC_LB_MEMORY_SPLIT                  0x006520
+#define   S_006520_DC_LB_MEMORY_SPLIT(x)               (((x) & 0x3) << 0)
+#define   G_006520_DC_LB_MEMORY_SPLIT(x)               (((x) >> 0) & 0x3)
+#define   C_006520_DC_LB_MEMORY_SPLIT                  0xFFFFFFFC
+#define   S_006520_DC_LB_MEMORY_SPLIT_MODE(x)          (((x) & 0x1) << 2)
+#define   G_006520_DC_LB_MEMORY_SPLIT_MODE(x)          (((x) >> 2) & 0x1)
+#define   C_006520_DC_LB_MEMORY_SPLIT_MODE             0xFFFFFFFB
+#define   V_006520_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF    0
+#define   V_006520_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q      1
+#define   V_006520_DC_LB_MEMORY_SPLIT_D1_ONLY          2
+#define   V_006520_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q      3
+#define   S_006520_DC_LB_DISP1_END_ADR(x)              (((x) & 0x7FF) << 4)
+#define   G_006520_DC_LB_DISP1_END_ADR(x)              (((x) >> 4) & 0x7FF)
+#define   C_006520_DC_LB_DISP1_END_ADR                 0xFFFF800F
+#define R_006548_D1MODE_PRIORITY_A_CNT               0x006548
+#define   S_006548_D1MODE_PRIORITY_MARK_A(x)           (((x) & 0x7FFF) << 0)
+#define   G_006548_D1MODE_PRIORITY_MARK_A(x)           (((x) >> 0) & 0x7FFF)
+#define   C_006548_D1MODE_PRIORITY_MARK_A              0xFFFF8000
+#define   S_006548_D1MODE_PRIORITY_A_OFF(x)            (((x) & 0x1) << 16)
+#define   G_006548_D1MODE_PRIORITY_A_OFF(x)            (((x) >> 16) & 0x1)
+#define   C_006548_D1MODE_PRIORITY_A_OFF               0xFFFEFFFF
+#define   S_006548_D1MODE_PRIORITY_A_FORCE_MASK(x)     (((x) & 0x1) << 24)
+#define   G_006548_D1MODE_PRIORITY_A_FORCE_MASK(x)     (((x) >> 24) & 0x1)
+#define   C_006548_D1MODE_PRIORITY_A_FORCE_MASK        0xFEFFFFFF
+#define R_00654C_D1MODE_PRIORITY_B_CNT               0x00654C
+#define   S_00654C_D1MODE_PRIORITY_MARK_B(x)           (((x) & 0x7FFF) << 0)
+#define   G_00654C_D1MODE_PRIORITY_MARK_B(x)           (((x) >> 0) & 0x7FFF)
+#define   C_00654C_D1MODE_PRIORITY_MARK_B              0xFFFF8000
+#define   S_00654C_D1MODE_PRIORITY_B_OFF(x)            (((x) & 0x1) << 16)
+#define   G_00654C_D1MODE_PRIORITY_B_OFF(x)            (((x) >> 16) & 0x1)
+#define   C_00654C_D1MODE_PRIORITY_B_OFF               0xFFFEFFFF
+#define   S_00654C_D1MODE_PRIORITY_B_ALWAYS_ON(x)      (((x) & 0x1) << 20)
+#define   G_00654C_D1MODE_PRIORITY_B_ALWAYS_ON(x)      (((x) >> 20) & 0x1)
+#define   C_00654C_D1MODE_PRIORITY_B_ALWAYS_ON         0xFFEFFFFF
+#define   S_00654C_D1MODE_PRIORITY_B_FORCE_MASK(x)     (((x) & 0x1) << 24)
+#define   G_00654C_D1MODE_PRIORITY_B_FORCE_MASK(x)     (((x) >> 24) & 0x1)
+#define   C_00654C_D1MODE_PRIORITY_B_FORCE_MASK        0xFEFFFFFF
+#define R_006C9C_DCP_CONTROL                         0x006C9C
+#define R_006D48_D2MODE_PRIORITY_A_CNT               0x006D48
+#define   S_006D48_D2MODE_PRIORITY_MARK_A(x)           (((x) & 0x7FFF) << 0)
+#define   G_006D48_D2MODE_PRIORITY_MARK_A(x)           (((x) >> 0) & 0x7FFF)
+#define   C_006D48_D2MODE_PRIORITY_MARK_A              0xFFFF8000
+#define   S_006D48_D2MODE_PRIORITY_A_OFF(x)            (((x) & 0x1) << 16)
+#define   G_006D48_D2MODE_PRIORITY_A_OFF(x)            (((x) >> 16) & 0x1)
+#define   C_006D48_D2MODE_PRIORITY_A_OFF               0xFFFEFFFF
+#define   S_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(x)      (((x) & 0x1) << 20)
+#define   G_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(x)      (((x) >> 20) & 0x1)
+#define   C_006D48_D2MODE_PRIORITY_A_ALWAYS_ON         0xFFEFFFFF
+#define   S_006D48_D2MODE_PRIORITY_A_FORCE_MASK(x)     (((x) & 0x1) << 24)
+#define   G_006D48_D2MODE_PRIORITY_A_FORCE_MASK(x)     (((x) >> 24) & 0x1)
+#define   C_006D48_D2MODE_PRIORITY_A_FORCE_MASK        0xFEFFFFFF
+#define R_006D4C_D2MODE_PRIORITY_B_CNT               0x006D4C
+#define   S_006D4C_D2MODE_PRIORITY_MARK_B(x)           (((x) & 0x7FFF) << 0)
+#define   G_006D4C_D2MODE_PRIORITY_MARK_B(x)           (((x) >> 0) & 0x7FFF)
+#define   C_006D4C_D2MODE_PRIORITY_MARK_B              0xFFFF8000
+#define   S_006D4C_D2MODE_PRIORITY_B_OFF(x)            (((x) & 0x1) << 16)
+#define   G_006D4C_D2MODE_PRIORITY_B_OFF(x)            (((x) >> 16) & 0x1)
+#define   C_006D4C_D2MODE_PRIORITY_B_OFF               0xFFFEFFFF
+#define   S_006D4C_D2MODE_PRIORITY_B_ALWAYS_ON(x)      (((x) & 0x1) << 20)
+#define   G_006D4C_D2MODE_PRIORITY_B_ALWAYS_ON(x)      (((x) >> 20) & 0x1)
+#define   C_006D4C_D2MODE_PRIORITY_B_ALWAYS_ON         0xFFEFFFFF
+#define   S_006D4C_D2MODE_PRIORITY_B_FORCE_MASK(x)     (((x) & 0x1) << 24)
+#define   G_006D4C_D2MODE_PRIORITY_B_FORCE_MASK(x)     (((x) >> 24) & 0x1)
+#define   C_006D4C_D2MODE_PRIORITY_B_FORCE_MASK        0xFEFFFFFF
+#define R_006D58_LB_MAX_REQ_OUTSTANDING              0x006D58
+#define   S_006D58_LB_D1_MAX_REQ_OUTSTANDING(x)        (((x) & 0xF) << 0)
+#define   G_006D58_LB_D1_MAX_REQ_OUTSTANDING(x)        (((x) >> 0) & 0xF)
+#define   C_006D58_LB_D1_MAX_REQ_OUTSTANDING           0xFFFFFFF0
+#define   S_006D58_LB_D2_MAX_REQ_OUTSTANDING(x)        (((x) & 0xF) << 16)
+#define   G_006D58_LB_D2_MAX_REQ_OUTSTANDING(x)        (((x) >> 16) & 0xF)
+#define   C_006D58_LB_D2_MAX_REQ_OUTSTANDING           0xFFF0FFFF
+
+
+#define R_000090_MC_SYSTEM_STATUS                    0x000090
+#define   S_000090_MC_SYSTEM_IDLE(x)                   (((x) & 0x1) << 0)
+#define   G_000090_MC_SYSTEM_IDLE(x)                   (((x) >> 0) & 0x1)
+#define   C_000090_MC_SYSTEM_IDLE                      0xFFFFFFFE
+#define   S_000090_MC_SEQUENCER_IDLE(x)                (((x) & 0x1) << 1)
+#define   G_000090_MC_SEQUENCER_IDLE(x)                (((x) >> 1) & 0x1)
+#define   C_000090_MC_SEQUENCER_IDLE                   0xFFFFFFFD
+#define   S_000090_MC_ARBITER_IDLE(x)                  (((x) & 0x1) << 2)
+#define   G_000090_MC_ARBITER_IDLE(x)                  (((x) >> 2) & 0x1)
+#define   C_000090_MC_ARBITER_IDLE                     0xFFFFFFFB
+#define   S_000090_MC_SELECT_PM(x)                     (((x) & 0x1) << 3)
+#define   G_000090_MC_SELECT_PM(x)                     (((x) >> 3) & 0x1)
+#define   C_000090_MC_SELECT_PM                        0xFFFFFFF7
+#define   S_000090_RESERVED4(x)                        (((x) & 0xF) << 4)
+#define   G_000090_RESERVED4(x)                        (((x) >> 4) & 0xF)
+#define   C_000090_RESERVED4                           0xFFFFFF0F
+#define   S_000090_RESERVED8(x)                        (((x) & 0xF) << 8)
+#define   G_000090_RESERVED8(x)                        (((x) >> 8) & 0xF)
+#define   C_000090_RESERVED8                           0xFFFFF0FF
+#define   S_000090_RESERVED12(x)                       (((x) & 0xF) << 12)
+#define   G_000090_RESERVED12(x)                       (((x) >> 12) & 0xF)
+#define   C_000090_RESERVED12                          0xFFFF0FFF
+#define   S_000090_MCA_INIT_EXECUTED(x)                (((x) & 0x1) << 16)
+#define   G_000090_MCA_INIT_EXECUTED(x)                (((x) >> 16) & 0x1)
+#define   C_000090_MCA_INIT_EXECUTED                   0xFFFEFFFF
+#define   S_000090_MCA_IDLE(x)                         (((x) & 0x1) << 17)
+#define   G_000090_MCA_IDLE(x)                         (((x) >> 17) & 0x1)
+#define   C_000090_MCA_IDLE                            0xFFFDFFFF
+#define   S_000090_MCA_SEQ_IDLE(x)                     (((x) & 0x1) << 18)
+#define   G_000090_MCA_SEQ_IDLE(x)                     (((x) >> 18) & 0x1)
+#define   C_000090_MCA_SEQ_IDLE                        0xFFFBFFFF
+#define   S_000090_MCA_ARB_IDLE(x)                     (((x) & 0x1) << 19)
+#define   G_000090_MCA_ARB_IDLE(x)                     (((x) >> 19) & 0x1)
+#define   C_000090_MCA_ARB_IDLE                        0xFFF7FFFF
+#define   S_000090_RESERVED20(x)                       (((x) & 0xFFF) << 20)
+#define   G_000090_RESERVED20(x)                       (((x) >> 20) & 0xFFF)
+#define   C_000090_RESERVED20                          0x000FFFFF
+#define R_000100_MCCFG_FB_LOCATION                   0x000100
+#define   S_000100_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000100_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000100_MC_FB_START                         0xFFFF0000
+#define   S_000100_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000100_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000100_MC_FB_TOP                           0x0000FFFF
+#define R_000104_MC_INIT_MISC_LAT_TIMER              0x000104
+#define   S_000104_MC_CPR_INIT_LAT(x)                  (((x) & 0xF) << 0)
+#define   G_000104_MC_CPR_INIT_LAT(x)                  (((x) >> 0) & 0xF)
+#define   C_000104_MC_CPR_INIT_LAT                     0xFFFFFFF0
+#define   S_000104_MC_VF_INIT_LAT(x)                   (((x) & 0xF) << 4)
+#define   G_000104_MC_VF_INIT_LAT(x)                   (((x) >> 4) & 0xF)
+#define   C_000104_MC_VF_INIT_LAT                      0xFFFFFF0F
+#define   S_000104_MC_DISP0R_INIT_LAT(x)               (((x) & 0xF) << 8)
+#define   G_000104_MC_DISP0R_INIT_LAT(x)               (((x) >> 8) & 0xF)
+#define   C_000104_MC_DISP0R_INIT_LAT                  0xFFFFF0FF
+#define   S_000104_MC_DISP1R_INIT_LAT(x)               (((x) & 0xF) << 12)
+#define   G_000104_MC_DISP1R_INIT_LAT(x)               (((x) >> 12) & 0xF)
+#define   C_000104_MC_DISP1R_INIT_LAT                  0xFFFF0FFF
+#define   S_000104_MC_FIXED_INIT_LAT(x)                (((x) & 0xF) << 16)
+#define   G_000104_MC_FIXED_INIT_LAT(x)                (((x) >> 16) & 0xF)
+#define   C_000104_MC_FIXED_INIT_LAT                   0xFFF0FFFF
+#define   S_000104_MC_E2R_INIT_LAT(x)                  (((x) & 0xF) << 20)
+#define   G_000104_MC_E2R_INIT_LAT(x)                  (((x) >> 20) & 0xF)
+#define   C_000104_MC_E2R_INIT_LAT                     0xFF0FFFFF
+#define   S_000104_SAME_PAGE_PRIO(x)                   (((x) & 0xF) << 24)
+#define   G_000104_SAME_PAGE_PRIO(x)                   (((x) >> 24) & 0xF)
+#define   C_000104_SAME_PAGE_PRIO                      0xF0FFFFFF
+#define   S_000104_MC_GLOBW_INIT_LAT(x)                (((x) & 0xF) << 28)
+#define   G_000104_MC_GLOBW_INIT_LAT(x)                (((x) >> 28) & 0xF)
+#define   C_000104_MC_GLOBW_INIT_LAT                   0x0FFFFFFF
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rs690r.h b/drivers/gpu/drm/radeon/rs690r.h
deleted file mode 100644
index c0d9faa2175b..000000000000
--- a/drivers/gpu/drm/radeon/rs690r.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright 2008 Advanced Micro Devices, Inc.
- * Copyright 2008 Red Hat Inc.
- * Copyright 2009 Jerome Glisse.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: Dave Airlie
- *          Alex Deucher
- *          Jerome Glisse
- */
-#ifndef RS690R_H
-#define RS690R_H
-
-/* RS690/RS740 registers */
-#define MC_INDEX			0x0078
-#	define MC_INDEX_MASK			0x1FF
-#	define MC_INDEX_WR_EN			(1 << 9)
-#	define MC_INDEX_WR_ACK			0x7F
-#define MC_DATA				0x007C
-#define HDP_FB_LOCATION			0x0134
-#define DC_LB_MEMORY_SPLIT		0x6520
-#define		DC_LB_MEMORY_SPLIT_MASK			0x00000003
-#define		DC_LB_MEMORY_SPLIT_SHIFT		0
-#define		DC_LB_MEMORY_SPLIT_D1HALF_D2HALF	0
-#define		DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q		1
-#define		DC_LB_MEMORY_SPLIT_D1_ONLY		2
-#define		DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q		3
-#define		DC_LB_MEMORY_SPLIT_SHIFT_MODE		(1 << 2)
-#define		DC_LB_DISP1_END_ADR_SHIFT		4
-#define		DC_LB_DISP1_END_ADR_MASK		0x00007FF0
-#define D1MODE_PRIORITY_A_CNT		0x6548
-#define		MODE_PRIORITY_MARK_MASK			0x00007FFF
-#define		MODE_PRIORITY_OFF			(1 << 16)
-#define		MODE_PRIORITY_ALWAYS_ON			(1 << 20)
-#define		MODE_PRIORITY_FORCE_MASK		(1 << 24)
-#define D1MODE_PRIORITY_B_CNT		0x654C
-#define LB_MAX_REQ_OUTSTANDING		0x6D58
-#define		LB_D1_MAX_REQ_OUTSTANDING_MASK		0x0000000F
-#define		LB_D1_MAX_REQ_OUTSTANDING_SHIFT		0
-#define		LB_D2_MAX_REQ_OUTSTANDING_MASK		0x000F0000
-#define		LB_D2_MAX_REQ_OUTSTANDING_SHIFT		16
-#define DCP_CONTROL			0x6C9C
-#define D2MODE_PRIORITY_A_CNT		0x6D48
-#define D2MODE_PRIORITY_B_CNT		0x6D4C
-
-/* MC indirect registers */
-#define MC_STATUS_IDLE				(1 << 0)
-#define MC_MISC_CNTL			0x18
-#define		DISABLE_GTW			(1 << 1)
-#define		GART_INDEX_REG_EN		(1 << 12)
-#define		BLOCK_GFX_D3_EN			(1 << 14)
-#define GART_FEATURE_ID			0x2B
-#define		HANG_EN				(1 << 11)
-#define		TLB_ENABLE			(1 << 18)
-#define		P2P_ENABLE			(1 << 19)
-#define		GTW_LAC_EN			(1 << 25)
-#define		LEVEL2_GART			(0 << 30)
-#define		LEVEL1_GART			(1 << 30)
-#define		PDC_EN				(1 << 31)
-#define GART_BASE			0x2C
-#define GART_CACHE_CNTRL		0x2E
-#	define GART_CACHE_INVALIDATE		(1 << 0)
-#define MC_STATUS			0x90
-#define MCCFG_FB_LOCATION		0x100
-#define		MC_FB_START_MASK		0x0000FFFF
-#define		MC_FB_START_SHIFT		0
-#define		MC_FB_TOP_MASK			0xFFFF0000
-#define		MC_FB_TOP_SHIFT			16
-#define MCCFG_AGP_LOCATION		0x101
-#define		MC_AGP_START_MASK		0x0000FFFF
-#define		MC_AGP_START_SHIFT		0
-#define		MC_AGP_TOP_MASK			0xFFFF0000
-#define		MC_AGP_TOP_SHIFT		16
-#define MCCFG_AGP_BASE			0x102
-#define MCCFG_AGP_BASE_2		0x103
-#define MC_INIT_MISC_LAT_TIMER		0x104
-#define		MC_DISP0R_INIT_LAT_SHIFT	8
-#define		MC_DISP0R_INIT_LAT_MASK		0x00000F00
-#define		MC_DISP1R_INIT_LAT_SHIFT	12
-#define		MC_DISP1R_INIT_LAT_MASK		0x0000F000
-
-#endif
diff --git a/drivers/gpu/drm/radeon/rv200d.h b/drivers/gpu/drm/radeon/rv200d.h
new file mode 100644
index 000000000000..c5b398330c26
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rv200d.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RV200D_H__
+#define __RV200D_H__
+
+#define R_00015C_AGP_BASE_2                          0x00015C
+#define   S_00015C_AGP_BASE_ADDR_2(x)                  (((x) & 0xF) << 0)
+#define   G_00015C_AGP_BASE_ADDR_2(x)                  (((x) >> 0) & 0xF)
+#define   C_00015C_AGP_BASE_ADDR_2                     0xFFFFFFF0
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv250d.h b/drivers/gpu/drm/radeon/rv250d.h
new file mode 100644
index 000000000000..e5a70b06fe1f
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rv250d.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RV250D_H__
+#define __RV250D_H__
+
+#define R_00000D_SCLK_CNTL_M6                        0x00000D
+#define   S_00000D_SCLK_SRC_SEL(x)                     (((x) & 0x7) << 0)
+#define   G_00000D_SCLK_SRC_SEL(x)                     (((x) >> 0) & 0x7)
+#define   C_00000D_SCLK_SRC_SEL                        0xFFFFFFF8
+#define   S_00000D_CP_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 3)
+#define   G_00000D_CP_MAX_DYN_STOP_LAT(x)              (((x) >> 3) & 0x1)
+#define   C_00000D_CP_MAX_DYN_STOP_LAT                 0xFFFFFFF7
+#define   S_00000D_HDP_MAX_DYN_STOP_LAT(x)             (((x) & 0x1) << 4)
+#define   G_00000D_HDP_MAX_DYN_STOP_LAT(x)             (((x) >> 4) & 0x1)
+#define   C_00000D_HDP_MAX_DYN_STOP_LAT                0xFFFFFFEF
+#define   S_00000D_TV_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 5)
+#define   G_00000D_TV_MAX_DYN_STOP_LAT(x)              (((x) >> 5) & 0x1)
+#define   C_00000D_TV_MAX_DYN_STOP_LAT                 0xFFFFFFDF
+#define   S_00000D_E2_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 6)
+#define   G_00000D_E2_MAX_DYN_STOP_LAT(x)              (((x) >> 6) & 0x1)
+#define   C_00000D_E2_MAX_DYN_STOP_LAT                 0xFFFFFFBF
+#define   S_00000D_SE_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 7)
+#define   G_00000D_SE_MAX_DYN_STOP_LAT(x)              (((x) >> 7) & 0x1)
+#define   C_00000D_SE_MAX_DYN_STOP_LAT                 0xFFFFFF7F
+#define   S_00000D_IDCT_MAX_DYN_STOP_LAT(x)            (((x) & 0x1) << 8)
+#define   G_00000D_IDCT_MAX_DYN_STOP_LAT(x)            (((x) >> 8) & 0x1)
+#define   C_00000D_IDCT_MAX_DYN_STOP_LAT               0xFFFFFEFF
+#define   S_00000D_VIP_MAX_DYN_STOP_LAT(x)             (((x) & 0x1) << 9)
+#define   G_00000D_VIP_MAX_DYN_STOP_LAT(x)             (((x) >> 9) & 0x1)
+#define   C_00000D_VIP_MAX_DYN_STOP_LAT                0xFFFFFDFF
+#define   S_00000D_RE_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 10)
+#define   G_00000D_RE_MAX_DYN_STOP_LAT(x)              (((x) >> 10) & 0x1)
+#define   C_00000D_RE_MAX_DYN_STOP_LAT                 0xFFFFFBFF
+#define   S_00000D_PB_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 11)
+#define   G_00000D_PB_MAX_DYN_STOP_LAT(x)              (((x) >> 11) & 0x1)
+#define   C_00000D_PB_MAX_DYN_STOP_LAT                 0xFFFFF7FF
+#define   S_00000D_TAM_MAX_DYN_STOP_LAT(x)             (((x) & 0x1) << 12)
+#define   G_00000D_TAM_MAX_DYN_STOP_LAT(x)             (((x) >> 12) & 0x1)
+#define   C_00000D_TAM_MAX_DYN_STOP_LAT                0xFFFFEFFF
+#define   S_00000D_TDM_MAX_DYN_STOP_LAT(x)             (((x) & 0x1) << 13)
+#define   G_00000D_TDM_MAX_DYN_STOP_LAT(x)             (((x) >> 13) & 0x1)
+#define   C_00000D_TDM_MAX_DYN_STOP_LAT                0xFFFFDFFF
+#define   S_00000D_RB_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 14)
+#define   G_00000D_RB_MAX_DYN_STOP_LAT(x)              (((x) >> 14) & 0x1)
+#define   C_00000D_RB_MAX_DYN_STOP_LAT                 0xFFFFBFFF
+#define   S_00000D_FORCE_DISP2(x)                      (((x) & 0x1) << 15)
+#define   G_00000D_FORCE_DISP2(x)                      (((x) >> 15) & 0x1)
+#define   C_00000D_FORCE_DISP2                         0xFFFF7FFF
+#define   S_00000D_FORCE_CP(x)                         (((x) & 0x1) << 16)
+#define   G_00000D_FORCE_CP(x)                         (((x) >> 16) & 0x1)
+#define   C_00000D_FORCE_CP                            0xFFFEFFFF
+#define   S_00000D_FORCE_HDP(x)                        (((x) & 0x1) << 17)
+#define   G_00000D_FORCE_HDP(x)                        (((x) >> 17) & 0x1)
+#define   C_00000D_FORCE_HDP                           0xFFFDFFFF
+#define   S_00000D_FORCE_DISP1(x)                      (((x) & 0x1) << 18)
+#define   G_00000D_FORCE_DISP1(x)                      (((x) >> 18) & 0x1)
+#define   C_00000D_FORCE_DISP1                         0xFFFBFFFF
+#define   S_00000D_FORCE_TOP(x)                        (((x) & 0x1) << 19)
+#define   G_00000D_FORCE_TOP(x)                        (((x) >> 19) & 0x1)
+#define   C_00000D_FORCE_TOP                           0xFFF7FFFF
+#define   S_00000D_FORCE_E2(x)                         (((x) & 0x1) << 20)
+#define   G_00000D_FORCE_E2(x)                         (((x) >> 20) & 0x1)
+#define   C_00000D_FORCE_E2                            0xFFEFFFFF
+#define   S_00000D_FORCE_SE(x)                         (((x) & 0x1) << 21)
+#define   G_00000D_FORCE_SE(x)                         (((x) >> 21) & 0x1)
+#define   C_00000D_FORCE_SE                            0xFFDFFFFF
+#define   S_00000D_FORCE_IDCT(x)                       (((x) & 0x1) << 22)
+#define   G_00000D_FORCE_IDCT(x)                       (((x) >> 22) & 0x1)
+#define   C_00000D_FORCE_IDCT                          0xFFBFFFFF
+#define   S_00000D_FORCE_VIP(x)                        (((x) & 0x1) << 23)
+#define   G_00000D_FORCE_VIP(x)                        (((x) >> 23) & 0x1)
+#define   C_00000D_FORCE_VIP                           0xFF7FFFFF
+#define   S_00000D_FORCE_RE(x)                         (((x) & 0x1) << 24)
+#define   G_00000D_FORCE_RE(x)                         (((x) >> 24) & 0x1)
+#define   C_00000D_FORCE_RE                            0xFEFFFFFF
+#define   S_00000D_FORCE_PB(x)                         (((x) & 0x1) << 25)
+#define   G_00000D_FORCE_PB(x)                         (((x) >> 25) & 0x1)
+#define   C_00000D_FORCE_PB                            0xFDFFFFFF
+#define   S_00000D_FORCE_TAM(x)                        (((x) & 0x1) << 26)
+#define   G_00000D_FORCE_TAM(x)                        (((x) >> 26) & 0x1)
+#define   C_00000D_FORCE_TAM                           0xFBFFFFFF
+#define   S_00000D_FORCE_TDM(x)                        (((x) & 0x1) << 27)
+#define   G_00000D_FORCE_TDM(x)                        (((x) >> 27) & 0x1)
+#define   C_00000D_FORCE_TDM                           0xF7FFFFFF
+#define   S_00000D_FORCE_RB(x)                         (((x) & 0x1) << 28)
+#define   G_00000D_FORCE_RB(x)                         (((x) >> 28) & 0x1)
+#define   C_00000D_FORCE_RB                            0xEFFFFFFF
+#define   S_00000D_FORCE_TV_SCLK(x)                    (((x) & 0x1) << 29)
+#define   G_00000D_FORCE_TV_SCLK(x)                    (((x) >> 29) & 0x1)
+#define   C_00000D_FORCE_TV_SCLK                       0xDFFFFFFF
+#define   S_00000D_FORCE_SUBPIC(x)                     (((x) & 0x1) << 30)
+#define   G_00000D_FORCE_SUBPIC(x)                     (((x) >> 30) & 0x1)
+#define   C_00000D_FORCE_SUBPIC                        0xBFFFFFFF
+#define   S_00000D_FORCE_OV0(x)                        (((x) & 0x1) << 31)
+#define   G_00000D_FORCE_OV0(x)                        (((x) >> 31) & 0x1)
+#define   C_00000D_FORCE_OV0                           0x7FFFFFFF
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv350d.h b/drivers/gpu/drm/radeon/rv350d.h
new file mode 100644
index 000000000000..c75c5ed9e654
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rv350d.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RV350D_H__
+#define __RV350D_H__
+
+/* RV350, RV380 registers */
+/* #define R_00000D_SCLK_CNTL                           0x00000D */
+#define   S_00000D_FORCE_VAP(x)                        (((x) & 0x1) << 21)
+#define   G_00000D_FORCE_VAP(x)                        (((x) >> 21) & 0x1)
+#define   C_00000D_FORCE_VAP                           0xFFDFFFFF
+#define   S_00000D_FORCE_SR(x)                         (((x) & 0x1) << 25)
+#define   G_00000D_FORCE_SR(x)                         (((x) >> 25) & 0x1)
+#define   C_00000D_FORCE_SR                            0xFDFFFFFF
+#define   S_00000D_FORCE_PX(x)                         (((x) & 0x1) << 26)
+#define   G_00000D_FORCE_PX(x)                         (((x) >> 26) & 0x1)
+#define   C_00000D_FORCE_PX                            0xFBFFFFFF
+#define   S_00000D_FORCE_TX(x)                         (((x) & 0x1) << 27)
+#define   G_00000D_FORCE_TX(x)                         (((x) >> 27) & 0x1)
+#define   C_00000D_FORCE_TX                            0xF7FFFFFF
+#define   S_00000D_FORCE_US(x)                         (((x) & 0x1) << 28)
+#define   G_00000D_FORCE_US(x)                         (((x) >> 28) & 0x1)
+#define   C_00000D_FORCE_US                            0xEFFFFFFF
+#define   S_00000D_FORCE_SU(x)                         (((x) & 0x1) << 30)
+#define   G_00000D_FORCE_SU(x)                         (((x) >> 30) & 0x1)
+#define   C_00000D_FORCE_SU                            0xBFFFFFFF
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index fd799748e7d8..41a34c23e6d8 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -29,37 +29,17 @@
 #include "drmP.h"
 #include "rv515d.h"
 #include "radeon.h"
-
+#include "atom.h"
 #include "rv515_reg_safe.h"
-/* rv515 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r100_cp_reset(struct radeon_device *rdev);
-int r100_rb2d_reset(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-
-/* This files gather functions specifics to:
- * rv515
- *
- * Some of these functions might be used by newer ASICs.
- */
+
+/* This files gather functions specifics to: rv515 */
 int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
 int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
 void rv515_gpu_init(struct radeon_device *rdev);
 int rv515_mc_wait_for_idle(struct radeon_device *rdev);
 
-
-/*
- * MC
- */
-int rv515_mc_init(struct radeon_device *rdev)
+void rv515_debugfs(struct radeon_device *rdev)
 {
-	uint32_t tmp;
-	int r;
-
 	if (r100_debugfs_rbbm_init(rdev)) {
 		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
 	}
@@ -69,67 +49,8 @@ int rv515_mc_init(struct radeon_device *rdev)
 	if (rv515_debugfs_ga_info_init(rdev)) {
 		DRM_ERROR("Failed to register debugfs file for pipes !\n");
 	}
-
-	rv515_gpu_init(rdev);
-	rv370_pcie_gart_disable(rdev);
-
-	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
-	rdev->mc.gtt_location = 0xFFFFFFFFUL;
-	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
-		} else {
-			rdev->mc.gtt_location = rdev->mc.agp_base;
-		}
-	}
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	/* Program GPU memory space */
-	rs600_mc_disable_clients(rdev);
-	if (rv515_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
-	tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32(0x134, tmp);
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(MC_FB_LOCATION, tmp);
-	WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
-	WREG32(0x310, rdev->mc.vram_location);
-	if (rdev->flags & RADEON_IS_AGP) {
-		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-		tmp = REG_SET(MC_AGP_TOP, tmp >> 16);
-		tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16);
-		WREG32_MC(MC_AGP_LOCATION, tmp);
-		WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base);
-		WREG32_MC(MC_AGP_BASE_2, 0);
-	} else {
-		WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF);
-		WREG32_MC(MC_AGP_BASE, 0);
-		WREG32_MC(MC_AGP_BASE_2, 0);
-	}
-	return 0;
-}
-
-void rv515_mc_fini(struct radeon_device *rdev)
-{
 }
 
-
-/*
- * Global GPU functions
- */
 void rv515_ring_start(struct radeon_device *rdev)
 {
 	int r;
@@ -198,11 +119,6 @@ void rv515_ring_start(struct radeon_device *rdev)
 	radeon_ring_unlock_commit(rdev);
 }
 
-void rv515_errata(struct radeon_device *rdev)
-{
-	rdev->pll_errata = 0;
-}
-
 int rv515_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
@@ -219,6 +135,12 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev)
 	return -1;
 }
 
+void rv515_vga_render_disable(struct radeon_device *rdev)
+{
+	WREG32(R_000300_VGA_RENDER_CONTROL,
+		RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL);
+}
+
 void rv515_gpu_init(struct radeon_device *rdev)
 {
 	unsigned pipe_select_current, gb_pipe_select, tmp;
@@ -231,7 +153,7 @@ void rv515_gpu_init(struct radeon_device *rdev)
 		       "reseting GPU. Bad things might happen.\n");
 	}
 
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 
 	r420_pipes_init(rdev);
 	gb_pipe_select = RREG32(0x402C);
@@ -335,10 +257,6 @@ int rv515_gpu_reset(struct radeon_device *rdev)
 	return 0;
 }
 
-
-/*
- * VRAM info
- */
 static void rv515_vram_get_type(struct radeon_device *rdev)
 {
 	uint32_t tmp;
@@ -374,10 +292,6 @@ void rv515_vram_info(struct radeon_device *rdev)
 	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
 }
 
-
-/*
- * Indirect registers accessor
- */
 uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg)
 {
 	uint32_t r;
@@ -395,9 +309,6 @@ void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 	WREG32(MC_IND_INDEX, 0);
 }
 
-/*
- * Debugfs info
- */
 #if defined(CONFIG_DEBUG_FS)
 static int rv515_debugfs_pipes_info(struct seq_file *m, void *data)
 {
@@ -459,13 +370,257 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev)
 #endif
 }
 
-/*
- * Asic initialization
- */
-int rv515_init(struct radeon_device *rdev)
+void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save)
+{
+	save->d1vga_control = RREG32(R_000330_D1VGA_CONTROL);
+	save->d2vga_control = RREG32(R_000338_D2VGA_CONTROL);
+	save->vga_render_control = RREG32(R_000300_VGA_RENDER_CONTROL);
+	save->vga_hdp_control = RREG32(R_000328_VGA_HDP_CONTROL);
+	save->d1crtc_control = RREG32(R_006080_D1CRTC_CONTROL);
+	save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL);
+
+	/* Stop all video */
+	WREG32(R_000330_D1VGA_CONTROL, 0);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+	WREG32(R_000300_VGA_RENDER_CONTROL, 0);
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
+	WREG32(R_006080_D1CRTC_CONTROL, 0);
+	WREG32(R_006880_D2CRTC_CONTROL, 0);
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+}
+
+void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save)
+{
+	WREG32(R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_000310_VGA_MEMORY_BASE_ADDRESS, rdev->mc.vram_start);
+	/* Unlock host access */
+	WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control);
+	mdelay(1);
+	/* Restore video state */
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
+	WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control);
+	WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control);
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+	WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control);
+	WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control);
+	WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control);
+}
+
+void rv515_mc_program(struct radeon_device *rdev)
+{
+	struct rv515_mc_save save;
+
+	/* Stops all mc clients */
+	rv515_mc_stop(rdev, &save);
+
+	/* Wait for mc idle */
+	if (rv515_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+	/* Write VRAM size in case we are limiting it */
+	WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	/* Program MC, should be a 32bits limited address space */
+	WREG32_MC(R_000001_MC_FB_LOCATION,
+			S_000001_MC_FB_START(rdev->mc.vram_start >> 16) |
+			S_000001_MC_FB_TOP(rdev->mc.vram_end >> 16));
+	WREG32(R_000134_HDP_FB_LOCATION,
+		S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+	if (rdev->flags & RADEON_IS_AGP) {
+		WREG32_MC(R_000002_MC_AGP_LOCATION,
+			S_000002_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+			S_000002_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+		WREG32_MC(R_000003_MC_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+		WREG32_MC(R_000004_MC_AGP_BASE_2,
+			S_000004_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base)));
+	} else {
+		WREG32_MC(R_000002_MC_AGP_LOCATION, 0xFFFFFFFF);
+		WREG32_MC(R_000003_MC_AGP_BASE, 0);
+		WREG32_MC(R_000004_MC_AGP_BASE_2, 0);
+	}
+
+	rv515_mc_resume(rdev, &save);
+}
+
+void rv515_clock_startup(struct radeon_device *rdev)
+{
+	if (radeon_dynclks != -1 && radeon_dynclks)
+		radeon_atom_set_clock_gating(rdev, 1);
+	/* We need to force on some of the block */
+	WREG32_PLL(R_00000F_CP_DYN_CNTL,
+		RREG32_PLL(R_00000F_CP_DYN_CNTL) | S_00000F_CP_FORCEON(1));
+	WREG32_PLL(R_000011_E2_DYN_CNTL,
+		RREG32_PLL(R_000011_E2_DYN_CNTL) | S_000011_E2_FORCEON(1));
+	WREG32_PLL(R_000013_IDCT_DYN_CNTL,
+		RREG32_PLL(R_000013_IDCT_DYN_CNTL) | S_000013_IDCT_FORCEON(1));
+}
+
+static int rv515_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	rv515_mc_program(rdev);
+	/* Resume clock */
+	rv515_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	rv515_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	if (rdev->flags & RADEON_IS_PCIE) {
+		r = rv370_pcie_gart_enable(rdev);
+		if (r)
+			return r;
+	}
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	rs600_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int rv515_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	rv515_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	atom_asic_init(rdev->mode_info.atom_context);
+	/* Resume clock after posting */
+	rv515_clock_startup(rdev);
+	return rv515_startup(rdev);
+}
+
+int rv515_suspend(struct radeon_device *rdev)
+{
+	r100_cp_disable(rdev);
+	r100_wb_disable(rdev);
+	rs600_irq_disable(rdev);
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	return 0;
+}
+
+void rv515_set_safe_registers(struct radeon_device *rdev)
 {
 	rdev->config.r300.reg_safe_bm = rv515_reg_safe_bm;
 	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rv515_reg_safe_bm);
+}
+
+void rv515_fini(struct radeon_device *rdev)
+{
+	rv515_suspend(rdev);
+	r100_cp_fini(rdev);
+	r100_wb_fini(rdev);
+	r100_ib_fini(rdev);
+	radeon_gem_fini(rdev);
+    rv370_pcie_gart_fini(rdev);
+	radeon_agp_fini(rdev);
+	radeon_irq_kms_fini(rdev);
+	radeon_fence_driver_fini(rdev);
+	radeon_object_fini(rdev);
+	radeon_atombios_fini(rdev);
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+}
+
+int rv515_init(struct radeon_device *rdev)
+{
+	int r;
+
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		r = radeon_atombios_init(rdev);
+		if (r)
+			return r;
+	} else {
+		dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+		return -EINVAL;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		atom_asic_init(rdev->mode_info.atom_context);
+	}
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	rv515_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r420_mc_init(rdev);
+	if (r)
+		return r;
+	rv515_debugfs(rdev);
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	r = rv370_pcie_gart_init(rdev);
+	if (r)
+		return r;
+	rv515_set_safe_registers(rdev);
+	rdev->accel_working = true;
+	r = rv515_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		rv515_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		rv370_pcie_gart_fini(rdev);
+		radeon_agp_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/rv515d.h b/drivers/gpu/drm/radeon/rv515d.h
index a65e17ec1c08..fc216e49384d 100644
--- a/drivers/gpu/drm/radeon/rv515d.h
+++ b/drivers/gpu/drm/radeon/rv515d.h
@@ -216,5 +216,388 @@
 #define CP_PACKET0_GET_ONE_REG_WR(h) (((h) >> 15) & 1)
 #define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF)
 
-#endif
+/* Registers */
+#define R_0000F8_CONFIG_MEMSIZE                      0x0000F8
+#define   S_0000F8_CONFIG_MEMSIZE(x)                   (((x) & 0xFFFFFFFF) << 0)
+#define   G_0000F8_CONFIG_MEMSIZE(x)                   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_0000F8_CONFIG_MEMSIZE                      0x00000000
+#define R_000134_HDP_FB_LOCATION                     0x000134
+#define   S_000134_HDP_FB_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000134_HDP_FB_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000134_HDP_FB_START                        0xFFFF0000
+#define R_000300_VGA_RENDER_CONTROL                  0x000300
+#define   S_000300_VGA_BLINK_RATE(x)                   (((x) & 0x1F) << 0)
+#define   G_000300_VGA_BLINK_RATE(x)                   (((x) >> 0) & 0x1F)
+#define   C_000300_VGA_BLINK_RATE                      0xFFFFFFE0
+#define   S_000300_VGA_BLINK_MODE(x)                   (((x) & 0x3) << 5)
+#define   G_000300_VGA_BLINK_MODE(x)                   (((x) >> 5) & 0x3)
+#define   C_000300_VGA_BLINK_MODE                      0xFFFFFF9F
+#define   S_000300_VGA_CURSOR_BLINK_INVERT(x)          (((x) & 0x1) << 7)
+#define   G_000300_VGA_CURSOR_BLINK_INVERT(x)          (((x) >> 7) & 0x1)
+#define   C_000300_VGA_CURSOR_BLINK_INVERT             0xFFFFFF7F
+#define   S_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x)       (((x) & 0x1) << 8)
+#define   G_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x)       (((x) >> 8) & 0x1)
+#define   C_000300_VGA_EXTD_ADDR_COUNT_ENABLE          0xFFFFFEFF
+#define   S_000300_VGA_VSTATUS_CNTL(x)                 (((x) & 0x3) << 16)
+#define   G_000300_VGA_VSTATUS_CNTL(x)                 (((x) >> 16) & 0x3)
+#define   C_000300_VGA_VSTATUS_CNTL                    0xFFFCFFFF
+#define   S_000300_VGA_LOCK_8DOT(x)                    (((x) & 0x1) << 24)
+#define   G_000300_VGA_LOCK_8DOT(x)                    (((x) >> 24) & 0x1)
+#define   C_000300_VGA_LOCK_8DOT                       0xFEFFFFFF
+#define   S_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) & 0x1) << 25)
+#define   G_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) >> 25) & 0x1)
+#define   C_000300_VGAREG_LINECMP_COMPATIBILITY_SEL    0xFDFFFFFF
+#define R_000310_VGA_MEMORY_BASE_ADDRESS             0x000310
+#define   S_000310_VGA_MEMORY_BASE_ADDRESS(x)          (((x) & 0xFFFFFFFF) << 0)
+#define   G_000310_VGA_MEMORY_BASE_ADDRESS(x)          (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000310_VGA_MEMORY_BASE_ADDRESS             0x00000000
+#define R_000328_VGA_HDP_CONTROL                     0x000328
+#define   S_000328_VGA_MEM_PAGE_SELECT_EN(x)           (((x) & 0x1) << 0)
+#define   G_000328_VGA_MEM_PAGE_SELECT_EN(x)           (((x) >> 0) & 0x1)
+#define   C_000328_VGA_MEM_PAGE_SELECT_EN              0xFFFFFFFE
+#define   S_000328_VGA_RBBM_LOCK_DISABLE(x)            (((x) & 0x1) << 8)
+#define   G_000328_VGA_RBBM_LOCK_DISABLE(x)            (((x) >> 8) & 0x1)
+#define   C_000328_VGA_RBBM_LOCK_DISABLE               0xFFFFFEFF
+#define   S_000328_VGA_SOFT_RESET(x)                   (((x) & 0x1) << 16)
+#define   G_000328_VGA_SOFT_RESET(x)                   (((x) >> 16) & 0x1)
+#define   C_000328_VGA_SOFT_RESET                      0xFFFEFFFF
+#define   S_000328_VGA_TEST_RESET_CONTROL(x)           (((x) & 0x1) << 24)
+#define   G_000328_VGA_TEST_RESET_CONTROL(x)           (((x) >> 24) & 0x1)
+#define   C_000328_VGA_TEST_RESET_CONTROL              0xFEFFFFFF
+#define R_000330_D1VGA_CONTROL                       0x000330
+#define   S_000330_D1VGA_MODE_ENABLE(x)                (((x) & 0x1) << 0)
+#define   G_000330_D1VGA_MODE_ENABLE(x)                (((x) >> 0) & 0x1)
+#define   C_000330_D1VGA_MODE_ENABLE                   0xFFFFFFFE
+#define   S_000330_D1VGA_TIMING_SELECT(x)              (((x) & 0x1) << 8)
+#define   G_000330_D1VGA_TIMING_SELECT(x)              (((x) >> 8) & 0x1)
+#define   C_000330_D1VGA_TIMING_SELECT                 0xFFFFFEFF
+#define   S_000330_D1VGA_SYNC_POLARITY_SELECT(x)       (((x) & 0x1) << 9)
+#define   G_000330_D1VGA_SYNC_POLARITY_SELECT(x)       (((x) >> 9) & 0x1)
+#define   C_000330_D1VGA_SYNC_POLARITY_SELECT          0xFFFFFDFF
+#define   S_000330_D1VGA_OVERSCAN_TIMING_SELECT(x)     (((x) & 0x1) << 10)
+#define   G_000330_D1VGA_OVERSCAN_TIMING_SELECT(x)     (((x) >> 10) & 0x1)
+#define   C_000330_D1VGA_OVERSCAN_TIMING_SELECT        0xFFFFFBFF
+#define   S_000330_D1VGA_OVERSCAN_COLOR_EN(x)          (((x) & 0x1) << 16)
+#define   G_000330_D1VGA_OVERSCAN_COLOR_EN(x)          (((x) >> 16) & 0x1)
+#define   C_000330_D1VGA_OVERSCAN_COLOR_EN             0xFFFEFFFF
+#define   S_000330_D1VGA_ROTATE(x)                     (((x) & 0x3) << 24)
+#define   G_000330_D1VGA_ROTATE(x)                     (((x) >> 24) & 0x3)
+#define   C_000330_D1VGA_ROTATE                        0xFCFFFFFF
+#define R_000338_D2VGA_CONTROL                       0x000338
+#define   S_000338_D2VGA_MODE_ENABLE(x)                (((x) & 0x1) << 0)
+#define   G_000338_D2VGA_MODE_ENABLE(x)                (((x) >> 0) & 0x1)
+#define   C_000338_D2VGA_MODE_ENABLE                   0xFFFFFFFE
+#define   S_000338_D2VGA_TIMING_SELECT(x)              (((x) & 0x1) << 8)
+#define   G_000338_D2VGA_TIMING_SELECT(x)              (((x) >> 8) & 0x1)
+#define   C_000338_D2VGA_TIMING_SELECT                 0xFFFFFEFF
+#define   S_000338_D2VGA_SYNC_POLARITY_SELECT(x)       (((x) & 0x1) << 9)
+#define   G_000338_D2VGA_SYNC_POLARITY_SELECT(x)       (((x) >> 9) & 0x1)
+#define   C_000338_D2VGA_SYNC_POLARITY_SELECT          0xFFFFFDFF
+#define   S_000338_D2VGA_OVERSCAN_TIMING_SELECT(x)     (((x) & 0x1) << 10)
+#define   G_000338_D2VGA_OVERSCAN_TIMING_SELECT(x)     (((x) >> 10) & 0x1)
+#define   C_000338_D2VGA_OVERSCAN_TIMING_SELECT        0xFFFFFBFF
+#define   S_000338_D2VGA_OVERSCAN_COLOR_EN(x)          (((x) & 0x1) << 16)
+#define   G_000338_D2VGA_OVERSCAN_COLOR_EN(x)          (((x) >> 16) & 0x1)
+#define   C_000338_D2VGA_OVERSCAN_COLOR_EN             0xFFFEFFFF
+#define   S_000338_D2VGA_ROTATE(x)                     (((x) & 0x3) << 24)
+#define   G_000338_D2VGA_ROTATE(x)                     (((x) >> 24) & 0x3)
+#define   C_000338_D2VGA_ROTATE                        0xFCFFFFFF
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_RBBM_HIBUSY(x)                      (((x) & 0x1) << 28)
+#define   G_000E40_RBBM_HIBUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_000E40_RBBM_HIBUSY                         0xEFFFFFFF
+#define   S_000E40_SKID_CFBUSY(x)                      (((x) & 0x1) << 29)
+#define   G_000E40_SKID_CFBUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_000E40_SKID_CFBUSY                         0xDFFFFFFF
+#define   S_000E40_VAP_VF_BUSY(x)                      (((x) & 0x1) << 30)
+#define   G_000E40_VAP_VF_BUSY(x)                      (((x) >> 30) & 0x1)
+#define   C_000E40_VAP_VF_BUSY                         0xBFFFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
+#define R_006080_D1CRTC_CONTROL                      0x006080
+#define   S_006080_D1CRTC_MASTER_EN(x)                 (((x) & 0x1) << 0)
+#define   G_006080_D1CRTC_MASTER_EN(x)                 (((x) >> 0) & 0x1)
+#define   C_006080_D1CRTC_MASTER_EN                    0xFFFFFFFE
+#define   S_006080_D1CRTC_SYNC_RESET_SEL(x)            (((x) & 0x1) << 4)
+#define   G_006080_D1CRTC_SYNC_RESET_SEL(x)            (((x) >> 4) & 0x1)
+#define   C_006080_D1CRTC_SYNC_RESET_SEL               0xFFFFFFEF
+#define   S_006080_D1CRTC_DISABLE_POINT_CNTL(x)        (((x) & 0x3) << 8)
+#define   G_006080_D1CRTC_DISABLE_POINT_CNTL(x)        (((x) >> 8) & 0x3)
+#define   C_006080_D1CRTC_DISABLE_POINT_CNTL           0xFFFFFCFF
+#define   S_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) & 0x1) << 16)
+#define   G_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) >> 16) & 0x1)
+#define   C_006080_D1CRTC_CURRENT_MASTER_EN_STATE      0xFFFEFFFF
+#define   S_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24)
+#define   G_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1)
+#define   C_006080_D1CRTC_DISP_READ_REQUEST_DISABLE    0xFEFFFFFF
+#define R_0060E8_D1CRTC_UPDATE_LOCK                  0x0060E8
+#define   S_0060E8_D1CRTC_UPDATE_LOCK(x)               (((x) & 0x1) << 0)
+#define   G_0060E8_D1CRTC_UPDATE_LOCK(x)               (((x) >> 0) & 0x1)
+#define   C_0060E8_D1CRTC_UPDATE_LOCK                  0xFFFFFFFE
+#define R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS      0x006110
+#define   S_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) & 0xFFFFFFFF) << 0)
+#define   G_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS      0x00000000
+#define R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS    0x006118
+#define   S_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define   G_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS    0x00000000
+#define R_006880_D2CRTC_CONTROL                      0x006880
+#define   S_006880_D2CRTC_MASTER_EN(x)                 (((x) & 0x1) << 0)
+#define   G_006880_D2CRTC_MASTER_EN(x)                 (((x) >> 0) & 0x1)
+#define   C_006880_D2CRTC_MASTER_EN                    0xFFFFFFFE
+#define   S_006880_D2CRTC_SYNC_RESET_SEL(x)            (((x) & 0x1) << 4)
+#define   G_006880_D2CRTC_SYNC_RESET_SEL(x)            (((x) >> 4) & 0x1)
+#define   C_006880_D2CRTC_SYNC_RESET_SEL               0xFFFFFFEF
+#define   S_006880_D2CRTC_DISABLE_POINT_CNTL(x)        (((x) & 0x3) << 8)
+#define   G_006880_D2CRTC_DISABLE_POINT_CNTL(x)        (((x) >> 8) & 0x3)
+#define   C_006880_D2CRTC_DISABLE_POINT_CNTL           0xFFFFFCFF
+#define   S_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) & 0x1) << 16)
+#define   G_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) >> 16) & 0x1)
+#define   C_006880_D2CRTC_CURRENT_MASTER_EN_STATE      0xFFFEFFFF
+#define   S_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24)
+#define   G_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1)
+#define   C_006880_D2CRTC_DISP_READ_REQUEST_DISABLE    0xFEFFFFFF
+#define R_0068E8_D2CRTC_UPDATE_LOCK                  0x0068E8
+#define   S_0068E8_D2CRTC_UPDATE_LOCK(x)               (((x) & 0x1) << 0)
+#define   G_0068E8_D2CRTC_UPDATE_LOCK(x)               (((x) >> 0) & 0x1)
+#define   C_0068E8_D2CRTC_UPDATE_LOCK                  0xFFFFFFFE
+#define R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS      0x006910
+#define   S_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) & 0xFFFFFFFF) << 0)
+#define   G_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS      0x00000000
+#define R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS    0x006918
+#define   S_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define   G_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS    0x00000000
+
+
+#define R_000001_MC_FB_LOCATION                      0x000001
+#define   S_000001_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000001_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000001_MC_FB_START                         0xFFFF0000
+#define   S_000001_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000001_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000001_MC_FB_TOP                           0x0000FFFF
+#define R_000002_MC_AGP_LOCATION                     0x000002
+#define   S_000002_MC_AGP_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000002_MC_AGP_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000002_MC_AGP_START                        0xFFFF0000
+#define   S_000002_MC_AGP_TOP(x)                       (((x) & 0xFFFF) << 16)
+#define   G_000002_MC_AGP_TOP(x)                       (((x) >> 16) & 0xFFFF)
+#define   C_000002_MC_AGP_TOP                          0x0000FFFF
+#define R_000003_MC_AGP_BASE                         0x000003
+#define   S_000003_AGP_BASE_ADDR(x)                    (((x) & 0xFFFFFFFF) << 0)
+#define   G_000003_AGP_BASE_ADDR(x)                    (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000003_AGP_BASE_ADDR                       0x00000000
+#define R_000004_MC_AGP_BASE_2                       0x000004
+#define   S_000004_AGP_BASE_ADDR_2(x)                  (((x) & 0xF) << 0)
+#define   G_000004_AGP_BASE_ADDR_2(x)                  (((x) >> 0) & 0xF)
+#define   C_000004_AGP_BASE_ADDR_2                     0xFFFFFFF0
 
+
+#define R_00000F_CP_DYN_CNTL                         0x00000F
+#define   S_00000F_CP_FORCEON(x)                       (((x) & 0x1) << 0)
+#define   G_00000F_CP_FORCEON(x)                       (((x) >> 0) & 0x1)
+#define   C_00000F_CP_FORCEON                          0xFFFFFFFE
+#define   S_00000F_CP_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 1)
+#define   G_00000F_CP_MAX_DYN_STOP_LAT(x)              (((x) >> 1) & 0x1)
+#define   C_00000F_CP_MAX_DYN_STOP_LAT                 0xFFFFFFFD
+#define   S_00000F_CP_CLOCK_STATUS(x)                  (((x) & 0x1) << 2)
+#define   G_00000F_CP_CLOCK_STATUS(x)                  (((x) >> 2) & 0x1)
+#define   C_00000F_CP_CLOCK_STATUS                     0xFFFFFFFB
+#define   S_00000F_CP_PROG_SHUTOFF(x)                  (((x) & 0x1) << 3)
+#define   G_00000F_CP_PROG_SHUTOFF(x)                  (((x) >> 3) & 0x1)
+#define   C_00000F_CP_PROG_SHUTOFF                     0xFFFFFFF7
+#define   S_00000F_CP_PROG_DELAY_VALUE(x)              (((x) & 0xFF) << 4)
+#define   G_00000F_CP_PROG_DELAY_VALUE(x)              (((x) >> 4) & 0xFF)
+#define   C_00000F_CP_PROG_DELAY_VALUE                 0xFFFFF00F
+#define   S_00000F_CP_LOWER_POWER_IDLE(x)              (((x) & 0xFF) << 12)
+#define   G_00000F_CP_LOWER_POWER_IDLE(x)              (((x) >> 12) & 0xFF)
+#define   C_00000F_CP_LOWER_POWER_IDLE                 0xFFF00FFF
+#define   S_00000F_CP_LOWER_POWER_IGNORE(x)            (((x) & 0x1) << 20)
+#define   G_00000F_CP_LOWER_POWER_IGNORE(x)            (((x) >> 20) & 0x1)
+#define   C_00000F_CP_LOWER_POWER_IGNORE               0xFFEFFFFF
+#define   S_00000F_CP_NORMAL_POWER_IGNORE(x)           (((x) & 0x1) << 21)
+#define   G_00000F_CP_NORMAL_POWER_IGNORE(x)           (((x) >> 21) & 0x1)
+#define   C_00000F_CP_NORMAL_POWER_IGNORE              0xFFDFFFFF
+#define   S_00000F_SPARE(x)                            (((x) & 0x3) << 22)
+#define   G_00000F_SPARE(x)                            (((x) >> 22) & 0x3)
+#define   C_00000F_SPARE                               0xFF3FFFFF
+#define   S_00000F_CP_NORMAL_POWER_BUSY(x)             (((x) & 0xFF) << 24)
+#define   G_00000F_CP_NORMAL_POWER_BUSY(x)             (((x) >> 24) & 0xFF)
+#define   C_00000F_CP_NORMAL_POWER_BUSY                0x00FFFFFF
+#define R_000011_E2_DYN_CNTL                         0x000011
+#define   S_000011_E2_FORCEON(x)                       (((x) & 0x1) << 0)
+#define   G_000011_E2_FORCEON(x)                       (((x) >> 0) & 0x1)
+#define   C_000011_E2_FORCEON                          0xFFFFFFFE
+#define   S_000011_E2_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 1)
+#define   G_000011_E2_MAX_DYN_STOP_LAT(x)              (((x) >> 1) & 0x1)
+#define   C_000011_E2_MAX_DYN_STOP_LAT                 0xFFFFFFFD
+#define   S_000011_E2_CLOCK_STATUS(x)                  (((x) & 0x1) << 2)
+#define   G_000011_E2_CLOCK_STATUS(x)                  (((x) >> 2) & 0x1)
+#define   C_000011_E2_CLOCK_STATUS                     0xFFFFFFFB
+#define   S_000011_E2_PROG_SHUTOFF(x)                  (((x) & 0x1) << 3)
+#define   G_000011_E2_PROG_SHUTOFF(x)                  (((x) >> 3) & 0x1)
+#define   C_000011_E2_PROG_SHUTOFF                     0xFFFFFFF7
+#define   S_000011_E2_PROG_DELAY_VALUE(x)              (((x) & 0xFF) << 4)
+#define   G_000011_E2_PROG_DELAY_VALUE(x)              (((x) >> 4) & 0xFF)
+#define   C_000011_E2_PROG_DELAY_VALUE                 0xFFFFF00F
+#define   S_000011_E2_LOWER_POWER_IDLE(x)              (((x) & 0xFF) << 12)
+#define   G_000011_E2_LOWER_POWER_IDLE(x)              (((x) >> 12) & 0xFF)
+#define   C_000011_E2_LOWER_POWER_IDLE                 0xFFF00FFF
+#define   S_000011_E2_LOWER_POWER_IGNORE(x)            (((x) & 0x1) << 20)
+#define   G_000011_E2_LOWER_POWER_IGNORE(x)            (((x) >> 20) & 0x1)
+#define   C_000011_E2_LOWER_POWER_IGNORE               0xFFEFFFFF
+#define   S_000011_E2_NORMAL_POWER_IGNORE(x)           (((x) & 0x1) << 21)
+#define   G_000011_E2_NORMAL_POWER_IGNORE(x)           (((x) >> 21) & 0x1)
+#define   C_000011_E2_NORMAL_POWER_IGNORE              0xFFDFFFFF
+#define   S_000011_SPARE(x)                            (((x) & 0x3) << 22)
+#define   G_000011_SPARE(x)                            (((x) >> 22) & 0x3)
+#define   C_000011_SPARE                               0xFF3FFFFF
+#define   S_000011_E2_NORMAL_POWER_BUSY(x)             (((x) & 0xFF) << 24)
+#define   G_000011_E2_NORMAL_POWER_BUSY(x)             (((x) >> 24) & 0xFF)
+#define   C_000011_E2_NORMAL_POWER_BUSY                0x00FFFFFF
+#define R_000013_IDCT_DYN_CNTL                       0x000013
+#define   S_000013_IDCT_FORCEON(x)                     (((x) & 0x1) << 0)
+#define   G_000013_IDCT_FORCEON(x)                     (((x) >> 0) & 0x1)
+#define   C_000013_IDCT_FORCEON                        0xFFFFFFFE
+#define   S_000013_IDCT_MAX_DYN_STOP_LAT(x)            (((x) & 0x1) << 1)
+#define   G_000013_IDCT_MAX_DYN_STOP_LAT(x)            (((x) >> 1) & 0x1)
+#define   C_000013_IDCT_MAX_DYN_STOP_LAT               0xFFFFFFFD
+#define   S_000013_IDCT_CLOCK_STATUS(x)                (((x) & 0x1) << 2)
+#define   G_000013_IDCT_CLOCK_STATUS(x)                (((x) >> 2) & 0x1)
+#define   C_000013_IDCT_CLOCK_STATUS                   0xFFFFFFFB
+#define   S_000013_IDCT_PROG_SHUTOFF(x)                (((x) & 0x1) << 3)
+#define   G_000013_IDCT_PROG_SHUTOFF(x)                (((x) >> 3) & 0x1)
+#define   C_000013_IDCT_PROG_SHUTOFF                   0xFFFFFFF7
+#define   S_000013_IDCT_PROG_DELAY_VALUE(x)            (((x) & 0xFF) << 4)
+#define   G_000013_IDCT_PROG_DELAY_VALUE(x)            (((x) >> 4) & 0xFF)
+#define   C_000013_IDCT_PROG_DELAY_VALUE               0xFFFFF00F
+#define   S_000013_IDCT_LOWER_POWER_IDLE(x)            (((x) & 0xFF) << 12)
+#define   G_000013_IDCT_LOWER_POWER_IDLE(x)            (((x) >> 12) & 0xFF)
+#define   C_000013_IDCT_LOWER_POWER_IDLE               0xFFF00FFF
+#define   S_000013_IDCT_LOWER_POWER_IGNORE(x)          (((x) & 0x1) << 20)
+#define   G_000013_IDCT_LOWER_POWER_IGNORE(x)          (((x) >> 20) & 0x1)
+#define   C_000013_IDCT_LOWER_POWER_IGNORE             0xFFEFFFFF
+#define   S_000013_IDCT_NORMAL_POWER_IGNORE(x)         (((x) & 0x1) << 21)
+#define   G_000013_IDCT_NORMAL_POWER_IGNORE(x)         (((x) >> 21) & 0x1)
+#define   C_000013_IDCT_NORMAL_POWER_IGNORE            0xFFDFFFFF
+#define   S_000013_SPARE(x)                            (((x) & 0x3) << 22)
+#define   G_000013_SPARE(x)                            (((x) >> 22) & 0x3)
+#define   C_000013_SPARE                               0xFF3FFFFF
+#define   S_000013_IDCT_NORMAL_POWER_BUSY(x)           (((x) & 0xFF) << 24)
+#define   G_000013_IDCT_NORMAL_POWER_BUSY(x)           (((x) >> 24) & 0xFF)
+#define   C_000013_IDCT_NORMAL_POWER_BUSY              0x00FFFFFF
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b574c73a5109..595ac638039d 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -31,8 +31,8 @@
 #include "radeon.h"
 #include "radeon_drm.h"
 #include "rv770d.h"
-#include "avivod.h"
 #include "atom.h"
+#include "avivod.h"
 
 #define R700_PFP_UCODE_SIZE 848
 #define R700_PM4_UCODE_SIZE 1360
@@ -75,7 +75,7 @@ int rv770_pcie_gart_enable(struct radeon_device *rdev)
 	WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp);
 	WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12);
-	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end - 1) >> 12);
+	WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12);
 	WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12);
 	WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) |
 				RANGE_PROTECTION_FAULT_ENABLE_DEFAULT);
@@ -126,17 +126,36 @@ void rv770_pcie_gart_fini(struct radeon_device *rdev)
 }
 
 
-/*
- * MC
- */
-static void rv770_mc_resume(struct radeon_device *rdev)
+void rv770_agp_enable(struct radeon_device *rdev)
+{
+	u32 tmp;
+	int i;
+
+	/* Setup L2 cache */
+	WREG32(VM_L2_CNTL, ENABLE_L2_CACHE | ENABLE_L2_FRAGMENT_PROCESSING |
+				ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE |
+				EFFECTIVE_L2_QUEUE_SIZE(7));
+	WREG32(VM_L2_CNTL2, 0);
+	WREG32(VM_L2_CNTL3, BANK_SELECT(0) | CACHE_UPDATE_MODE(2));
+	/* Setup TLB control */
+	tmp = ENABLE_L1_TLB | ENABLE_L1_FRAGMENT_PROCESSING |
+		SYSTEM_ACCESS_MODE_NOT_IN_SYS |
+		SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU |
+		EFFECTIVE_L1_TLB_SIZE(5) | EFFECTIVE_L1_QUEUE_SIZE(5);
+	WREG32(MC_VM_MD_L1_TLB0_CNTL, tmp);
+	WREG32(MC_VM_MD_L1_TLB1_CNTL, tmp);
+	WREG32(MC_VM_MD_L1_TLB2_CNTL, tmp);
+	WREG32(MC_VM_MB_L1_TLB0_CNTL, tmp);
+	WREG32(MC_VM_MB_L1_TLB1_CNTL, tmp);
+	WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
+	WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp);
+	for (i = 0; i < 7; i++)
+		WREG32(VM_CONTEXT0_CNTL + (i * 4), 0);
+}
+
+static void rv770_mc_program(struct radeon_device *rdev)
 {
-	u32 d1vga_control, d2vga_control;
-	u32 vga_render_control, vga_hdp_control;
-	u32 d1crtc_control, d2crtc_control;
-	u32 new_d1grph_primary, new_d1grph_secondary;
-	u32 new_d2grph_primary, new_d2grph_secondary;
-	u64 old_vram_start;
+	struct rv515_mc_save save;
 	u32 tmp;
 	int i, j;
 
@@ -150,53 +169,42 @@ static void rv770_mc_resume(struct radeon_device *rdev)
 	}
 	WREG32(HDP_REG_COHERENCY_FLUSH_CNTL, 0);
 
-	d1vga_control = RREG32(D1VGA_CONTROL);
-	d2vga_control = RREG32(D2VGA_CONTROL);
-	vga_render_control = RREG32(VGA_RENDER_CONTROL);
-	vga_hdp_control = RREG32(VGA_HDP_CONTROL);
-	d1crtc_control = RREG32(D1CRTC_CONTROL);
-	d2crtc_control = RREG32(D2CRTC_CONTROL);
-	old_vram_start = (u64)(RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
-	new_d1grph_primary = RREG32(D1GRPH_PRIMARY_SURFACE_ADDRESS);
-	new_d1grph_secondary = RREG32(D1GRPH_SECONDARY_SURFACE_ADDRESS);
-	new_d1grph_primary += rdev->mc.vram_start - old_vram_start;
-	new_d1grph_secondary += rdev->mc.vram_start - old_vram_start;
-	new_d2grph_primary = RREG32(D2GRPH_PRIMARY_SURFACE_ADDRESS);
-	new_d2grph_secondary = RREG32(D2GRPH_SECONDARY_SURFACE_ADDRESS);
-	new_d2grph_primary += rdev->mc.vram_start - old_vram_start;
-	new_d2grph_secondary += rdev->mc.vram_start - old_vram_start;
-
-	/* Stop all video */
-	WREG32(D1VGA_CONTROL, 0);
-	WREG32(D2VGA_CONTROL, 0);
-	WREG32(VGA_RENDER_CONTROL, 0);
-	WREG32(D1CRTC_UPDATE_LOCK, 1);
-	WREG32(D2CRTC_UPDATE_LOCK, 1);
-	WREG32(D1CRTC_CONTROL, 0);
-	WREG32(D2CRTC_CONTROL, 0);
-	WREG32(D1CRTC_UPDATE_LOCK, 0);
-	WREG32(D2CRTC_UPDATE_LOCK, 0);
-
-	mdelay(1);
+	rv515_mc_stop(rdev, &save);
 	if (r600_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "[drm] MC not idle !\n");
+		dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
 	}
-
 	/* Lockout access through VGA aperture*/
 	WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE);
-
 	/* Update configuration */
-	WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12);
-	WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, (rdev->mc.vram_end - 1) >> 12);
+	if (rdev->flags & RADEON_IS_AGP) {
+		if (rdev->mc.vram_start < rdev->mc.gtt_start) {
+			/* VRAM before AGP */
+			WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+				rdev->mc.vram_start >> 12);
+			WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+				rdev->mc.gtt_end >> 12);
+		} else {
+			/* VRAM after AGP */
+			WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+				rdev->mc.gtt_start >> 12);
+			WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+				rdev->mc.vram_end >> 12);
+		}
+	} else {
+		WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+			rdev->mc.vram_start >> 12);
+		WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+			rdev->mc.vram_end >> 12);
+	}
 	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
-	tmp = (((rdev->mc.vram_end - 1) >> 24) & 0xFFFF) << 16;
+	tmp = ((rdev->mc.vram_end >> 24) & 0xFFFF) << 16;
 	tmp |= ((rdev->mc.vram_start >> 24) & 0xFFFF);
 	WREG32(MC_VM_FB_LOCATION, tmp);
 	WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
 	WREG32(HDP_NONSURFACE_INFO, (2 << 7));
 	WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
 	if (rdev->flags & RADEON_IS_AGP) {
-		WREG32(MC_VM_AGP_TOP, (rdev->mc.gtt_end - 1) >> 16);
+		WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
 		WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
 		WREG32(MC_VM_AGP_BASE, rdev->mc.agp_base >> 22);
 	} else {
@@ -204,34 +212,13 @@ static void rv770_mc_resume(struct radeon_device *rdev)
 		WREG32(MC_VM_AGP_TOP, 0x0FFFFFFF);
 		WREG32(MC_VM_AGP_BOT, 0x0FFFFFFF);
 	}
-	WREG32(D1GRPH_PRIMARY_SURFACE_ADDRESS, new_d1grph_primary);
-	WREG32(D1GRPH_SECONDARY_SURFACE_ADDRESS, new_d1grph_secondary);
-	WREG32(D2GRPH_PRIMARY_SURFACE_ADDRESS, new_d2grph_primary);
-	WREG32(D2GRPH_SECONDARY_SURFACE_ADDRESS, new_d2grph_secondary);
-	WREG32(VGA_MEMORY_BASE_ADDRESS, rdev->mc.vram_start);
-
-	/* Unlock host access */
-	WREG32(VGA_HDP_CONTROL, vga_hdp_control);
-
-	mdelay(1);
 	if (r600_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "[drm] MC not idle !\n");
+		dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
 	}
-
-	/* Restore video state */
-	WREG32(D1CRTC_UPDATE_LOCK, 1);
-	WREG32(D2CRTC_UPDATE_LOCK, 1);
-	WREG32(D1CRTC_CONTROL, d1crtc_control);
-	WREG32(D2CRTC_CONTROL, d2crtc_control);
-	WREG32(D1CRTC_UPDATE_LOCK, 0);
-	WREG32(D2CRTC_UPDATE_LOCK, 0);
-	WREG32(D1VGA_CONTROL, d1vga_control);
-	WREG32(D2VGA_CONTROL, d2vga_control);
-	WREG32(VGA_RENDER_CONTROL, vga_render_control);
-
+	rv515_mc_resume(rdev, &save);
 	/* we need to own VRAM, so turn off the VGA renderer here
 	 * to stop it overwriting our objects */
-	radeon_avivo_vga_render_disable(rdev);
+	rv515_vga_render_disable(rdev);
 }
 
 
@@ -801,6 +788,13 @@ int rv770_mc_init(struct radeon_device *rdev)
 	/* Setup GPU memory space */
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
+
+	if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+		rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+	if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+		rdev->mc.real_vram_size = rdev->mc.aper_size;
+
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
 		if (r)
@@ -833,9 +827,9 @@ int rv770_mc_init(struct radeon_device *rdev)
 		rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
 	}
 	rdev->mc.vram_start = rdev->mc.vram_location;
-	rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size;
+	rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	rdev->mc.gtt_start = rdev->mc.gtt_location;
-	rdev->mc.gtt_end = rdev->mc.gtt_location + rdev->mc.gtt_size;
+	rdev->mc.gtt_end = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
 	/* FIXME: we should enforce default clock in case GPU is not in
 	 * default setup
 	 */
@@ -854,11 +848,14 @@ static int rv770_startup(struct radeon_device *rdev)
 {
 	int r;
 
-	radeon_gpu_reset(rdev);
-	rv770_mc_resume(rdev);
-	r = rv770_pcie_gart_enable(rdev);
-	if (r)
-		return r;
+	rv770_mc_program(rdev);
+	if (rdev->flags & RADEON_IS_AGP) {
+		rv770_agp_enable(rdev);
+	} else {
+		r = rv770_pcie_gart_enable(rdev);
+		if (r)
+			return r;
+	}
 	rv770_gpu_init(rdev);
 
 	r = radeon_object_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
@@ -877,9 +874,8 @@ static int rv770_startup(struct radeon_device *rdev)
 	r = r600_cp_resume(rdev);
 	if (r)
 		return r;
-	r = r600_wb_init(rdev);
-	if (r)
-		return r;
+	/* write back buffer are not vital so don't worry about failure */
+	r600_wb_enable(rdev);
 	return 0;
 }
 
@@ -887,15 +883,12 @@ int rv770_resume(struct radeon_device *rdev)
 {
 	int r;
 
-	if (radeon_gpu_reset(rdev)) {
-		/* FIXME: what do we want to do here ? */
-	}
+	/* Do not reset GPU before posting, on rv770 hw unlike on r500 hw,
+	 * posting will perform necessary task to bring back GPU into good
+	 * shape.
+	 */
 	/* post card */
-	if (rdev->is_atom_bios) {
-		atom_asic_init(rdev->mode_info.atom_context);
-	} else {
-		radeon_combios_asic_init(rdev->ddev);
-	}
+	atom_asic_init(rdev->mode_info.atom_context);
 	/* Initialize clocks */
 	r = radeon_clocks_init(rdev);
 	if (r) {
@@ -908,7 +901,7 @@ int rv770_resume(struct radeon_device *rdev)
 		return r;
 	}
 
-	r = radeon_ib_test(rdev);
+	r = r600_ib_test(rdev);
 	if (r) {
 		DRM_ERROR("radeon: failled testing IB (%d).\n", r);
 		return r;
@@ -922,8 +915,8 @@ int rv770_suspend(struct radeon_device *rdev)
 	/* FIXME: we should wait for ring to be empty */
 	r700_cp_stop(rdev);
 	rdev->cp.ready = false;
+	r600_wb_disable(rdev);
 	rv770_pcie_gart_disable(rdev);
-
 	/* unpin shaders bo */
         radeon_object_unpin(rdev->r600_blit.shader_obj);
 	return 0;
@@ -939,7 +932,6 @@ int rv770_init(struct radeon_device *rdev)
 {
 	int r;
 
-	rdev->new_init_path = true;
 	r = radeon_dummy_page_init(rdev);
 	if (r)
 		return r;
@@ -953,8 +945,10 @@ int rv770_init(struct radeon_device *rdev)
 			return -EINVAL;
 	}
 	/* Must be an ATOMBIOS */
-	if (!rdev->is_atom_bios)
+	if (!rdev->is_atom_bios) {
+		dev_err(rdev->dev, "Expecting atombios for R600 GPU\n");
 		return -EINVAL;
+	}
 	r = radeon_atombios_init(rdev);
 	if (r)
 		return r;
@@ -976,15 +970,8 @@ int rv770_init(struct radeon_device *rdev)
 	if (r)
 		return r;
 	r = rv770_mc_init(rdev);
-	if (r) {
-		if (rdev->flags & RADEON_IS_AGP) {
-			/* Retry with disabling AGP */
-			rv770_fini(rdev);
-			rdev->flags &= ~RADEON_IS_AGP;
-			return rv770_init(rdev);
-		}
+	if (r)
 		return r;
-	}
 	/* Memory manager */
 	r = radeon_object_init(rdev);
 	if (r)
@@ -1013,12 +1000,10 @@ int rv770_init(struct radeon_device *rdev)
 
 	r = rv770_startup(rdev);
 	if (r) {
-		if (rdev->flags & RADEON_IS_AGP) {
-			/* Retry with disabling AGP */
-			rv770_fini(rdev);
-			rdev->flags &= ~RADEON_IS_AGP;
-			return rv770_init(rdev);
-		}
+		rv770_suspend(rdev);
+		r600_wb_fini(rdev);
+		radeon_ring_fini(rdev);
+		rv770_pcie_gart_fini(rdev);
 		rdev->accel_working = false;
 	}
 	if (rdev->accel_working) {
@@ -1027,7 +1012,7 @@ int rv770_init(struct radeon_device *rdev)
 			DRM_ERROR("radeon: failled initializing IB pool (%d).\n", r);
 			rdev->accel_working = false;
 		}
-		r = radeon_ib_test(rdev);
+		r = r600_ib_test(rdev);
 		if (r) {
 			DRM_ERROR("radeon: failled testing IB (%d).\n", r);
 			rdev->accel_working = false;
@@ -1042,20 +1027,15 @@ void rv770_fini(struct radeon_device *rdev)
 
 	r600_blit_fini(rdev);
 	radeon_ring_fini(rdev);
+	r600_wb_fini(rdev);
 	rv770_pcie_gart_fini(rdev);
 	radeon_gem_fini(rdev);
 	radeon_fence_driver_fini(rdev);
 	radeon_clocks_fini(rdev);
-#if __OS_HAS_AGP
 	if (rdev->flags & RADEON_IS_AGP)
 		radeon_agp_fini(rdev);
-#endif
 	radeon_object_fini(rdev);
-	if (rdev->is_atom_bios) {
-		radeon_atombios_fini(rdev);
-	} else {
-		radeon_combios_fini(rdev);
-	}
+	radeon_atombios_fini(rdev);
 	kfree(rdev->bios);
 	rdev->bios = NULL;
 	radeon_dummy_page_fini(rdev);
diff --git a/drivers/gpu/drm/ttm/ttm_global.c b/drivers/gpu/drm/ttm/ttm_global.c
index 541744d00d3e..b17007178a36 100644
--- a/drivers/gpu/drm/ttm/ttm_global.c
+++ b/drivers/gpu/drm/ttm/ttm_global.c
@@ -82,8 +82,8 @@ int ttm_global_item_ref(struct ttm_global_reference *ref)
 		if (unlikely(ret != 0))
 			goto out_err;
 
-		++item->refcount;
 	}
+	++item->refcount;
 	ref->object = item->object;
 	object = item->object;
 	mutex_unlock(&item->mutex);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index be34d32906bd..7d05c4bb201e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1066,7 +1066,7 @@ EXPORT_SYMBOL_GPL(hid_report_raw_event);
  * @type: HID report type (HID_*_REPORT)
  * @data: report contents
  * @size: size of data parameter
- * @interrupt: called from atomic?
+ * @interrupt: distinguish between interrupt and control transfers
  *
  * This is data entry for lower layers.
  */
diff --git a/drivers/hid/hid-twinhan.c b/drivers/hid/hid-twinhan.c
index b05f602c051e..c40afc57fc8f 100644
--- a/drivers/hid/hid-twinhan.c
+++ b/drivers/hid/hid-twinhan.c
@@ -132,12 +132,12 @@ static struct hid_driver twinhan_driver = {
 	.input_mapping = twinhan_input_mapping,
 };
 
-static int twinhan_init(void)
+static int __init twinhan_init(void)
 {
 	return hid_register_driver(&twinhan_driver);
 }
 
-static void twinhan_exit(void)
+static void __exit twinhan_exit(void)
 {
 	hid_unregister_driver(&twinhan_driver);
 }
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 0c6639ea03dd..cdd136942bca 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -30,6 +30,7 @@
 #include <linux/major.h>
 #include <linux/hid.h>
 #include <linux/mutex.h>
+#include <linux/sched.h>
 #include <linux/smp_lock.h>
 
 #include <linux/hidraw.h>
@@ -47,10 +48,9 @@ static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count,
 	char *report;
 	DECLARE_WAITQUEUE(wait, current);
 
-	while (ret == 0) {
-
-		mutex_lock(&list->read_mutex);
+	mutex_lock(&list->read_mutex);
 
+	while (ret == 0) {
 		if (list->head == list->tail) {
 			add_wait_queue(&list->hidraw->wait, &wait);
 			set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6857560144bd..700e93adeb33 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -675,7 +675,7 @@ config SENSORS_SHT15
 
 config SENSORS_S3C
 	tristate "S3C24XX/S3C64XX Inbuilt ADC"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C2410
 	help
 	  If you say yes here you get support for the on-board ADCs of
 	  the Samsung S3C24XX or S3C64XX series of SoC
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index fe4fa29c9219..5a3ee00c0e7d 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -35,18 +35,22 @@
 #define METHOD_OLD_ENUM_FAN	"FSIF"
 
 #define ATK_MUX_HWMON		0x00000006ULL
+#define ATK_MUX_MGMT		0x00000011ULL
 
 #define ATK_CLASS_MASK		0xff000000ULL
 #define ATK_CLASS_FREQ_CTL	0x03000000ULL
 #define ATK_CLASS_FAN_CTL	0x04000000ULL
 #define ATK_CLASS_HWMON		0x06000000ULL
+#define ATK_CLASS_MGMT		0x11000000ULL
 
 #define ATK_TYPE_MASK		0x00ff0000ULL
 #define HWMON_TYPE_VOLT		0x00020000ULL
 #define HWMON_TYPE_TEMP		0x00030000ULL
 #define HWMON_TYPE_FAN		0x00040000ULL
 
-#define HWMON_SENSOR_ID_MASK	0x0000ffffULL
+#define ATK_ELEMENT_ID_MASK	0x0000ffffULL
+
+#define ATK_EC_ID		0x11060004ULL
 
 enum atk_pack_member {
 	HWMON_PACK_FLAGS,
@@ -89,6 +93,9 @@ struct atk_data {
 	/* new inteface */
 	acpi_handle enumerate_handle;
 	acpi_handle read_handle;
+	acpi_handle write_handle;
+
+	bool disable_ec;
 
 	int voltage_count;
 	int temperature_count;
@@ -129,9 +136,22 @@ struct atk_sensor_data {
 	char const *acpi_name;
 };
 
-struct atk_acpi_buffer_u64 {
-	union acpi_object buf;
-	u64 value;
+/* Return buffer format:
+ * [0-3] "value" is valid flag
+ * [4-7] value
+ * [8- ] unknown stuff on newer mobos
+ */
+struct atk_acpi_ret_buffer {
+	u32 flags;
+	u32 value;
+	u8 data[];
+};
+
+/* Input buffer used for GITM and SITM methods */
+struct atk_acpi_input_buf {
+	u32 id;
+	u32 param1;
+	u32 param2;
 };
 
 static int atk_add(struct acpi_device *device);
@@ -439,52 +459,147 @@ static int atk_read_value_old(struct atk_sensor_data *sensor, u64 *value)
 	return 0;
 }
 
-static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value)
+static union acpi_object *atk_ggrp(struct atk_data *data, u16 mux)
 {
-	struct atk_data *data = sensor->data;
 	struct device *dev = &data->acpi_dev->dev;
+	struct acpi_buffer buf;
+	acpi_status ret;
 	struct acpi_object_list params;
-	struct acpi_buffer ret;
 	union acpi_object id;
-	struct atk_acpi_buffer_u64 tmp;
-	acpi_status status;
+	union acpi_object *pack;
 
 	id.type = ACPI_TYPE_INTEGER;
-	id.integer.value = sensor->id;
-
+	id.integer.value = mux;
 	params.count = 1;
 	params.pointer = &id;
 
-	tmp.buf.type = ACPI_TYPE_BUFFER;
-	tmp.buf.buffer.pointer = (u8 *)&tmp.value;
-	tmp.buf.buffer.length = sizeof(u64);
-	ret.length = sizeof(tmp);
-	ret.pointer = &tmp;
+	buf.length = ACPI_ALLOCATE_BUFFER;
+	ret = acpi_evaluate_object(data->enumerate_handle, NULL, &params, &buf);
+	if (ret != AE_OK) {
+		dev_err(dev, "GGRP[%#x] ACPI exception: %s\n", mux,
+				acpi_format_exception(ret));
+		return ERR_PTR(-EIO);
+	}
+	pack = buf.pointer;
+	if (pack->type != ACPI_TYPE_PACKAGE) {
+		/* Execution was successful, but the id was not found */
+		ACPI_FREE(pack);
+		return ERR_PTR(-ENOENT);
+	}
+
+	if (pack->package.count < 1) {
+		dev_err(dev, "GGRP[%#x] package is too small\n", mux);
+		ACPI_FREE(pack);
+		return ERR_PTR(-EIO);
+	}
+	return pack;
+}
+
+static union acpi_object *atk_gitm(struct atk_data *data, u64 id)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	struct atk_acpi_input_buf buf;
+	union acpi_object tmp;
+	struct acpi_object_list params;
+	struct acpi_buffer ret;
+	union acpi_object *obj;
+	acpi_status status;
+
+	buf.id = id;
+	buf.param1 = 0;
+	buf.param2 = 0;
 
+	tmp.type = ACPI_TYPE_BUFFER;
+	tmp.buffer.pointer = (u8 *)&buf;
+	tmp.buffer.length = sizeof(buf);
+
+	params.count = 1;
+	params.pointer = (void *)&tmp;
+
+	ret.length = ACPI_ALLOCATE_BUFFER;
 	status = acpi_evaluate_object_typed(data->read_handle, NULL, &params,
 			&ret, ACPI_TYPE_BUFFER);
 	if (status != AE_OK) {
-		dev_warn(dev, "%s: ACPI exception: %s\n", __func__,
+		dev_warn(dev, "GITM[%#llx] ACPI exception: %s\n", id,
 				acpi_format_exception(status));
-		return -EIO;
+		return ERR_PTR(-EIO);
+	}
+	obj = ret.pointer;
+
+	/* Sanity check */
+	if (obj->buffer.length < 8) {
+		dev_warn(dev, "Unexpected ASBF length: %u\n",
+				obj->buffer.length);
+		ACPI_FREE(obj);
+		return ERR_PTR(-EIO);
 	}
+	return obj;
+}
 
-	/* Return buffer format:
-	 * [0-3] "value" is valid flag
-	 * [4-7] value
-	 */
-	if (!(tmp.value & 0xffffffff)) {
+static union acpi_object *atk_sitm(struct atk_data *data,
+		struct atk_acpi_input_buf *buf)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	struct acpi_object_list params;
+	union acpi_object tmp;
+	struct acpi_buffer ret;
+	union acpi_object *obj;
+	acpi_status status;
+
+	tmp.type = ACPI_TYPE_BUFFER;
+	tmp.buffer.pointer = (u8 *)buf;
+	tmp.buffer.length = sizeof(*buf);
+
+	params.count = 1;
+	params.pointer = &tmp;
+
+	ret.length = ACPI_ALLOCATE_BUFFER;
+	status = acpi_evaluate_object_typed(data->write_handle, NULL, &params,
+			&ret, ACPI_TYPE_BUFFER);
+	if (status != AE_OK) {
+		dev_warn(dev, "SITM[%#x] ACPI exception: %s\n", buf->id,
+				acpi_format_exception(status));
+		return ERR_PTR(-EIO);
+	}
+	obj = ret.pointer;
+
+	/* Sanity check */
+	if (obj->buffer.length < 8) {
+		dev_warn(dev, "Unexpected ASBF length: %u\n",
+				obj->buffer.length);
+		ACPI_FREE(obj);
+		return ERR_PTR(-EIO);
+	}
+	return obj;
+}
+
+static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value)
+{
+	struct atk_data *data = sensor->data;
+	struct device *dev = &data->acpi_dev->dev;
+	union acpi_object *obj;
+	struct atk_acpi_ret_buffer *buf;
+	int err = 0;
+
+	obj = atk_gitm(data, sensor->id);
+	if (IS_ERR(obj))
+		return PTR_ERR(obj);
+
+	buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+	if (buf->flags == 0) {
 		/* The reading is not valid, possible causes:
 		 * - sensor failure
 		 * - enumeration was FUBAR (and we didn't notice)
 		 */
-		dev_info(dev, "Failure: %#llx\n", tmp.value);
-		return -EIO;
+		dev_warn(dev, "Read failed, sensor = %#llx\n", sensor->id);
+		err = -EIO;
+		goto out;
 	}
 
-	*value = (tmp.value & 0xffffffff00000000ULL) >> 32;
-
-	return 0;
+	*value = buf->value;
+out:
+	ACPI_FREE(obj);
+	return err;
 }
 
 static int atk_read_value(struct atk_sensor_data *sensor, u64 *value)
@@ -713,43 +828,141 @@ cleanup:
 	return ret;
 }
 
-static int atk_enumerate_new_hwmon(struct atk_data *data)
+static int atk_ec_present(struct atk_data *data)
 {
 	struct device *dev = &data->acpi_dev->dev;
-	struct acpi_buffer buf;
-	acpi_status ret;
-	struct acpi_object_list params;
-	union acpi_object id;
 	union acpi_object *pack;
-	int err;
+	union acpi_object *ec;
+	int ret;
 	int i;
 
-	dev_dbg(dev, "Enumerating hwmon sensors\n");
+	pack = atk_ggrp(data, ATK_MUX_MGMT);
+	if (IS_ERR(pack)) {
+		if (PTR_ERR(pack) == -ENOENT) {
+			/* The MGMT class does not exists - that's ok */
+			dev_dbg(dev, "Class %#llx not found\n", ATK_MUX_MGMT);
+			return 0;
+		}
+		return PTR_ERR(pack);
+	}
 
-	id.type = ACPI_TYPE_INTEGER;
-	id.integer.value = ATK_MUX_HWMON;
-	params.count = 1;
-	params.pointer = &id;
+	/* Search the EC */
+	ec = NULL;
+	for (i = 0; i < pack->package.count; i++) {
+		union acpi_object *obj = &pack->package.elements[i];
+		union acpi_object *id;
 
-	buf.length = ACPI_ALLOCATE_BUFFER;
-	ret = acpi_evaluate_object_typed(data->enumerate_handle, NULL, &params,
-			&buf, ACPI_TYPE_PACKAGE);
-	if (ret != AE_OK) {
-		dev_warn(dev, METHOD_ENUMERATE ": ACPI exception: %s\n",
-				acpi_format_exception(ret));
-		return -ENODEV;
+		if (obj->type != ACPI_TYPE_PACKAGE)
+			continue;
+
+		id = &obj->package.elements[0];
+		if (id->type != ACPI_TYPE_INTEGER)
+			continue;
+
+		if (id->integer.value == ATK_EC_ID) {
+			ec = obj;
+			break;
+		}
 	}
 
-	/* Result must be a package */
-	pack = buf.pointer;
+	ret = (ec != NULL);
+	if (!ret)
+		/* The system has no EC */
+		dev_dbg(dev, "EC not found\n");
 
-	if (pack->package.count < 1) {
-		dev_dbg(dev, "%s: hwmon package is too small: %d\n", __func__,
-				pack->package.count);
-		err = -EINVAL;
-		goto out;
+	ACPI_FREE(pack);
+	return ret;
+}
+
+static int atk_ec_enabled(struct atk_data *data)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	union acpi_object *obj;
+	struct atk_acpi_ret_buffer *buf;
+	int err;
+
+	obj = atk_gitm(data, ATK_EC_ID);
+	if (IS_ERR(obj)) {
+		dev_err(dev, "Unable to query EC status\n");
+		return PTR_ERR(obj);
+	}
+	buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+
+	if (buf->flags == 0) {
+		dev_err(dev, "Unable to query EC status\n");
+		err = -EIO;
+	} else {
+		err = (buf->value != 0);
+		dev_dbg(dev, "EC is %sabled\n",
+				err ? "en" : "dis");
+	}
+
+	ACPI_FREE(obj);
+	return err;
+}
+
+static int atk_ec_ctl(struct atk_data *data, int enable)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	union acpi_object *obj;
+	struct atk_acpi_input_buf sitm;
+	struct atk_acpi_ret_buffer *ec_ret;
+	int err = 0;
+
+	sitm.id = ATK_EC_ID;
+	sitm.param1 = enable;
+	sitm.param2 = 0;
+
+	obj = atk_sitm(data, &sitm);
+	if (IS_ERR(obj)) {
+		dev_err(dev, "Failed to %sable the EC\n",
+				enable ? "en" : "dis");
+		return PTR_ERR(obj);
+	}
+	ec_ret = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+	if (ec_ret->flags == 0) {
+		dev_err(dev, "Failed to %sable the EC\n",
+				enable ? "en" : "dis");
+		err = -EIO;
+	} else {
+		dev_info(dev, "EC %sabled\n",
+				enable ? "en" : "dis");
+	}
+
+	ACPI_FREE(obj);
+	return err;
+}
+
+static int atk_enumerate_new_hwmon(struct atk_data *data)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	union acpi_object *pack;
+	int err;
+	int i;
+
+	err = atk_ec_present(data);
+	if (err < 0)
+		return err;
+	if (err) {
+		err = atk_ec_enabled(data);
+		if (err < 0)
+			return err;
+		/* If the EC was disabled we will disable it again on unload */
+		data->disable_ec = err;
+
+		err = atk_ec_ctl(data, 1);
+		if (err) {
+			data->disable_ec = false;
+			return err;
+		}
 	}
 
+	dev_dbg(dev, "Enumerating hwmon sensors\n");
+
+	pack = atk_ggrp(data, ATK_MUX_HWMON);
+	if (IS_ERR(pack))
+		return PTR_ERR(pack);
+
 	for (i = 0; i < pack->package.count; i++) {
 		union acpi_object *obj = &pack->package.elements[i];
 
@@ -758,8 +971,7 @@ static int atk_enumerate_new_hwmon(struct atk_data *data)
 
 	err = data->voltage_count + data->temperature_count + data->fan_count;
 
-out:
-	ACPI_FREE(buf.pointer);
+	ACPI_FREE(pack);
 	return err;
 }
 
@@ -895,6 +1107,15 @@ static int atk_check_new_if(struct atk_data *data)
 	}
 	data->read_handle = ret;
 
+	/* De-multiplexer (write) */
+	status = acpi_get_handle(data->atk_handle, METHOD_WRITE, &ret);
+	if (status != AE_OK) {
+		dev_dbg(dev, "method " METHOD_READ " not found: %s\n",
+				 acpi_format_exception(status));
+		return -ENODEV;
+	}
+	data->write_handle = ret;
+
 	return 0;
 }
 
@@ -915,6 +1136,7 @@ static int atk_add(struct acpi_device *device)
 	data->acpi_dev = device;
 	data->atk_handle = device->handle;
 	INIT_LIST_HEAD(&data->sensor_list);
+	data->disable_ec = false;
 
 	buf.length = ACPI_ALLOCATE_BUFFER;
 	ret = acpi_evaluate_object_typed(data->atk_handle, BOARD_ID, NULL,
@@ -973,6 +1195,8 @@ static int atk_add(struct acpi_device *device)
 cleanup:
 	atk_free_sensors(data);
 out:
+	if (data->disable_ec)
+		atk_ec_ctl(data, 0);
 	kfree(data);
 	return err;
 }
@@ -988,6 +1212,11 @@ static int atk_remove(struct acpi_device *device, int type)
 	atk_free_sensors(data);
 	hwmon_device_unregister(data->hwmon_dev);
 
+	if (data->disable_ec) {
+		if (atk_ec_ctl(data, 0))
+			dev_err(&device->dev, "Failed to disable EC\n");
+	}
+
 	kfree(data);
 
 	return 0;
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 2c2cb1ec94c5..27d62574284f 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -572,7 +572,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 
 	/* Sample register contents every 1 sec */
 	if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
-		if (data->type != sch5027) {
+		if (data->type == dme1737) {
 			data->vid = dme1737_read(data, DME1737_REG_VID) &
 				0x3f;
 		}
@@ -1621,9 +1621,6 @@ static struct attribute *dme1737_misc_attr[] = {
 	&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
 	&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
 	&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
-	/* Misc */
-	&dev_attr_vrm.attr,
-	&dev_attr_cpu0_vid.attr,
 	NULL
 };
 
@@ -1631,6 +1628,18 @@ static const struct attribute_group dme1737_misc_group = {
 	.attrs = dme1737_misc_attr,
 };
 
+/* The following struct holds VID-related attributes. Their creation
+   depends on the chip type which is determined during module load. */
+static struct attribute *dme1737_vid_attr[] = {
+	&dev_attr_vrm.attr,
+	&dev_attr_cpu0_vid.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_vid_group = {
+	.attrs = dme1737_vid_attr,
+};
+
 /* The following structs hold the PWM attributes, some of which are optional.
  * Their creation depends on the chip configuration which is determined during
  * module load. */
@@ -1902,6 +1911,9 @@ static void dme1737_remove_files(struct device *dev)
 	if (data->type != sch5027) {
 		sysfs_remove_group(&dev->kobj, &dme1737_misc_group);
 	}
+	if (data->type == dme1737) {
+		sysfs_remove_group(&dev->kobj, &dme1737_vid_group);
+	}
 
 	sysfs_remove_group(&dev->kobj, &dme1737_group);
 
@@ -1933,6 +1945,13 @@ static int dme1737_create_files(struct device *dev)
 		goto exit_remove;
 	}
 
+	/* Create VID-related sysfs attributes */
+	if ((data->type == dme1737) &&
+	    (err = sysfs_create_group(&dev->kobj,
+				      &dme1737_vid_group))) {
+		goto exit_remove;
+	}
+
 	/* Create fan sysfs attributes */
 	for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
 		if (data->has_fan & (1 << ix)) {
@@ -2127,7 +2146,7 @@ static int dme1737_init_device(struct device *dev)
 	data->pwm_acz[2] = 4;	/* pwm3 -> zone3 */
 
 	/* Set VRM */
-	if (data->type != sch5027) {
+	if (data->type == dme1737) {
 		data->vrm = vid_which_vrm();
 	}
 
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index ea955edde87e..da1b1f9488af 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -819,7 +819,7 @@ static int watchdog_release(struct inode *inode, struct file *filp)
 static ssize_t watchdog_write(struct file *filp, const char __user *buf,
 	size_t count, loff_t *offset)
 {
-	size_t ret;
+	int ret;
 	struct fschmd_data *data = filp->private_data;
 
 	if (count) {
@@ -915,7 +915,7 @@ static int watchdog_ioctl(struct inode *inode, struct file *filp,
 	return ret;
 }
 
-static struct file_operations watchdog_fops = {
+static const struct file_operations watchdog_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.open = watchdog_open,
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 6679854c85b0..be475e844c2a 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -197,11 +197,13 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
 	AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted),
 	AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
-	AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
+	AXIS_DMI_MATCH("NC6730b", "HP Compaq 6730b", xy_rotated_left_usd),
+	AXIS_DMI_MATCH("NC6730s", "HP Compaq 6730s", xy_swap),
 	AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
 	AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted),
 	AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted),
 	AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right),
+	AXIS_DMI_MATCH("NC693xx", "HP EliteBook 853", xy_swap),
 	/* Intel-based HP Pavilion dv5 */
 	AXIS_DMI_MATCH2("HPDV5_I",
 			PRODUCT_NAME, "HP Pavilion dv5",
@@ -214,6 +216,7 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 			y_inverted),
 	AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted),
 	AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted),
+	AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
 	{ NULL, }
 /* Laptop models without axis info (yet):
  * "NC6910" "HP Compaq 6910"
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index ffeb2a10e1a7..a3749cb0f181 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1028,12 +1028,11 @@ static int __init it87_find(unsigned short *address,
 		chip_type, *address, sio_data->revision);
 
 	/* Read GPIO config and VID value from LDN 7 (GPIO) */
-	if (chip_type != IT8705F_DEVID) {
+	if (sio_data->type != it87) {
 		int reg;
 
 		superio_select(GPIO);
-		if ((chip_type == it8718) ||
-		    (chip_type == it8720))
+		if (sio_data->type == it8718 || sio_data->type == it8720)
 			sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
 
 		reg = superio_inb(IT87_SIO_PINX2_REG);
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
index ecd739534f6a..82b16808a274 100644
--- a/drivers/hwmon/lis3lv02d_spi.c
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -83,7 +83,8 @@ static int __devexit lis302dl_spi_remove(struct spi_device *spi)
 	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
 	lis3lv02d_joystick_disable();
 	lis3lv02d_poweroff(lis3);
-	return 0;
+
+	return lis3lv02d_remove_fs(&lis3_dev);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 6c9a04136e0a..00d975eb5b83 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -20,11 +20,6 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4215);
-
 /* Here are names of the chip's registers (a.k.a. commands) */
 enum ltc4215_cmd {
 	LTC4215_CONTROL			= 0x00, /* rw */
@@ -246,9 +241,13 @@ static const struct attribute_group ltc4215_group = {
 static int ltc4215_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct i2c_adapter *adapter = client->adapter;
 	struct ltc4215_data *data;
 	int ret;
 
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		ret = -ENOMEM;
@@ -294,56 +293,20 @@ static int ltc4215_remove(struct i2c_client *client)
 	return 0;
 }
 
-static int ltc4215_detect(struct i2c_client *client,
-			  int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	if (kind < 0) {		/* probed detection - check the chip type */
-		s32 v;		/* 8 bits from the chip, or -ERRNO */
-
-		/*
-		 * Register 0x01 bit b7 is reserved, expect 0
-		 * Register 0x03 bit b6 and b7 are reserved, expect 0
-		 */
-		v = i2c_smbus_read_byte_data(client, LTC4215_ALERT);
-		if (v < 0 || (v & (1 << 7)) != 0)
-			return -ENODEV;
-
-		v = i2c_smbus_read_byte_data(client, LTC4215_FAULT);
-		if (v < 0 || (v & ((1 << 6) | (1 << 7))) != 0)
-				return -ENODEV;
-	}
-
-	strlcpy(info->type, "ltc4215", I2C_NAME_SIZE);
-	dev_info(&adapter->dev, "ltc4215 %s at address 0x%02x\n",
-			kind < 0 ? "probed" : "forced",
-			client->addr);
-
-	return 0;
-}
-
 static const struct i2c_device_id ltc4215_id[] = {
-	{ "ltc4215", ltc4215 },
+	{ "ltc4215", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ltc4215_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ltc4215_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "ltc4215",
 	},
 	.probe		= ltc4215_probe,
 	.remove		= ltc4215_remove,
 	.id_table	= ltc4215_id,
-	.detect		= ltc4215_detect,
-	.address_data	= &addr_data,
 };
 
 static int __init ltc4215_init(void)
diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
index e38964333612..65c232a9d0c5 100644
--- a/drivers/hwmon/ltc4245.c
+++ b/drivers/hwmon/ltc4245.c
@@ -22,15 +22,6 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 
-/* Valid addresses are 0x20 - 0x3f
- *
- * For now, we do not probe, since some of these addresses
- * are known to be unfriendly to probing */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4245);
-
 /* Here are names of the chip's registers (a.k.a. commands) */
 enum ltc4245_cmd {
 	LTC4245_STATUS			= 0x00, /* readonly */
@@ -369,9 +360,13 @@ static const struct attribute_group ltc4245_group = {
 static int ltc4245_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct i2c_adapter *adapter = client->adapter;
 	struct ltc4245_data *data;
 	int ret;
 
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		ret = -ENOMEM;
@@ -418,136 +413,20 @@ static int ltc4245_remove(struct i2c_client *client)
 	return 0;
 }
 
-/* Check that some bits in a control register appear at all possible
- * locations without changing value
- *
- * @client: the i2c client to use
- * @reg: the register to read
- * @bits: the bits to check (0xff checks all bits,
- *                           0x03 checks only the last two bits)
- *
- * return -ERRNO if the register read failed
- * return -ENODEV if the register value doesn't stay constant at all
- * possible addresses
- *
- * return 0 for success
- */
-static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits)
-{
-	int i;
-	s32 v, voff1, voff2;
-
-	/* Read register and check for error */
-	v = i2c_smbus_read_byte_data(client, reg);
-	if (v < 0)
-		return v;
-
-	v &= bits;
-
-	for (i = 0x00; i < 0xff; i += 0x20) {
-
-		voff1 = i2c_smbus_read_byte_data(client, reg + i);
-		if (voff1 < 0)
-			return voff1;
-
-		voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08);
-		if (voff2 < 0)
-			return voff2;
-
-		voff1 &= bits;
-		voff2 &= bits;
-
-		if (v != voff1 || v != voff2)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int ltc4245_detect(struct i2c_client *client,
-			  int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	if (kind < 0) {		/* probed detection - check the chip type */
-		s32 v;		/* 8 bits from the chip, or -ERRNO */
-
-		/* Chip registers 0x00-0x07 are control registers
-		 * Chip registers 0x10-0x1f are data registers
-		 *
-		 * Address bits b7-b5 are ignored. This makes the chip "repeat"
-		 * in steps of 0x20. Any control registers should appear with
-		 * the same values across all duplicated addresses.
-		 *
-		 * Register 0x02 bit b2 is reserved, expect 0
-		 * Register 0x07 bits b7 to b4 are reserved, expect 0
-		 *
-		 * Registers 0x01, 0x02 are control registers and should not
-		 * change on their own.
-		 *
-		 * Register 0x06 bits b6 and b7 are control bits, and should
-		 * not change on their own.
-		 *
-		 * Register 0x07 bits b3 to b0 are control bits, and should
-		 * not change on their own.
-		 */
-
-		/* read register 0x02 reserved bit, expect 0 */
-		v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL);
-		if (v < 0 || (v & 0x04) != 0)
-			return -ENODEV;
-
-		/* read register 0x07 reserved bits, expect 0 */
-		v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR);
-		if (v < 0 || (v & 0xf0) != 0)
-			return -ENODEV;
-
-		/* check that the alert register appears at all locations */
-		if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff))
-			return -ENODEV;
-
-		/* check that the control register appears at all locations */
-		if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff))
-			return -ENODEV;
-
-		/* check that register 0x06 bits b6 and b7 stay constant */
-		if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0))
-			return -ENODEV;
-
-		/* check that register 0x07 bits b3-b0 stay constant */
-		if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f))
-			return -ENODEV;
-	}
-
-	strlcpy(info->type, "ltc4245", I2C_NAME_SIZE);
-	dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n",
-			kind < 0 ? "probed" : "forced",
-			client->addr);
-
-	return 0;
-}
-
 static const struct i2c_device_id ltc4245_id[] = {
-	{ "ltc4245", ltc4245 },
+	{ "ltc4245", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ltc4245_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ltc4245_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "ltc4245",
 	},
 	.probe		= ltc4245_probe,
 	.remove		= ltc4245_remove,
 	.id_table	= ltc4245_id,
-	.detect		= ltc4245_detect,
-	.address_data	= &addr_data,
 };
 
 static int __init ltc4245_init(void)
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 303c02694c3c..ebe38b680ee3 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -30,6 +30,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <linux/err.h>
@@ -622,7 +623,12 @@ static int __devexit sht15_remove(struct platform_device *pdev)
 }
 
 
-static struct platform_driver sht_drivers[] = {
+/*
+ * sht_drivers simultaneously refers to __devinit and __devexit function
+ * which causes spurious section mismatch warning. So use __refdata to
+ * get rid from this.
+ */
+static struct platform_driver __refdata sht_drivers[] = {
 	{
 		.driver = {
 			.name = "sht10",
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index f7d6fe9c49ba..8f0b90ef8c76 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -364,7 +364,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev,
 	error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
 				  amd756_driver.name);
 	if (error)
-		return error;
+		return -ENODEV;
 
 	if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
 		dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index a7c59908c457..5b4ad86ca166 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -376,8 +376,10 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
 	smbus->size = pci_resource_len(dev, 0);
 
 	error = acpi_check_resource_conflict(&dev->resource[0]);
-	if (error)
+	if (error) {
+		error = -ENODEV;
 		goto out_kfree;
+	}
 
 	if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
 		error = -EBUSY;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9d2c5adf5d4f..55edcfe5b851 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -732,8 +732,10 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
 	}
 
 	err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
-	if (err)
+	if (err) {
+		err = -ENODEV;
 		goto exit;
+	}
 
 	err = pci_request_region(dev, SMBBAR, i801_driver.name);
 	if (err) {
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index 9f6b8e0f8632..dba6eb053e2f 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -281,7 +281,7 @@ static int __devinit sch_probe(struct pci_dev *dev,
 		return -ENODEV;
 	}
 	if (acpi_check_region(sch_smba, SMBIOSIZE, sch_driver.name))
-		return -EBUSY;
+		return -ENODEV;
 	if (!request_region(sch_smba, SMBIOSIZE, sch_driver.name)) {
 		dev_err(&dev->dev, "SMBus region 0x%x already in use!\n",
 			sch_smba);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index a782c7a08f9e..d26a972aacaa 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -169,7 +169,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 	}
 
 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
-		return -EBUSY;
+		return -ENODEV;
 
 	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
 		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
@@ -260,7 +260,7 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 
 	piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
-		return -EBUSY;
+		return -ENODEV;
 
 	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
 		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 8295885b2fdb..1649963b00dc 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -280,7 +280,7 @@ static int __devinit sis96x_probe(struct pci_dev *dev,
 
 	retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
 	if (retval)
-		return retval;
+		return -ENODEV;
 
 	/* Everything is happy, let's grab the memory and set things up. */
 	if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 54d810a4d00f..e4b1543015af 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -365,7 +365,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 found:
 	error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
 	if (error)
-		return error;
+		return -ENODEV;
 
 	if (!request_region(vt596_smba, 8, vt596_driver.name)) {
 		dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
index 6396c3ad3252..837322b10a4c 100644
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -177,7 +177,7 @@ static const struct pci_device_id atiixp_pci_tbl[] = {
 	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
 	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
 	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
-	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), 0 },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), 0 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 28d09a5d8450..017c09540c2f 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -273,14 +273,8 @@ static const struct ide_proc_devset ide_generic_settings[] = {
 
 static void proc_ide_settings_warn(void)
 {
-	static int warned;
-
-	if (warned)
-		return;
-
-	printk(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is "
+	printk_once(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is "
 			    "obsolete, and will be removed soon!\n");
-	warned = 1;
 }
 
 static int ide_settings_proc_show(struct seq_file *m, void *v)
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index afca22beaadf..3b88eba04c9c 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -2,7 +2,7 @@
  * Copyright (C) 1999-2000	Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2002		Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
  * Copyright (C) 2003		Vojtech Pavlik <vojtech@suse.cz>
- * Copyright (C) 2007		Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2007-2009	Bartlomiej Zolnierkiewicz
  *
  * May be copied or modified under the terms of the GNU General Public License
  *
@@ -281,11 +281,13 @@ static void config_drive_art_rwp(ide_drive_t *drive)
 
 	pci_read_config_byte(dev, 0x4b, &reg4bh);
 
+	rw_prefetch = reg4bh & ~(0x11 << drive->dn);
+
 	if (drive->media == ide_disk)
-		rw_prefetch = 0x11 << drive->dn;
+		rw_prefetch |= 0x11 << drive->dn;
 
-	if ((reg4bh & (0x11 << drive->dn)) != rw_prefetch)
-		pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
+	if (reg4bh != rw_prefetch)
+		pci_write_config_byte(dev, 0x4b, rw_prefetch);
 }
 
 static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index 0bc3d78ce7b1..8aa56ac07e29 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -29,6 +29,7 @@
 
 #include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index d287ba79821d..949064a05675 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -30,6 +30,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index 5be1bd4fc7ed..bd07803e9183 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -393,7 +393,7 @@ static int addr_resolve_local(struct sockaddr *src_in,
 
 		for_each_netdev(&init_net, dev)
 			if (ipv6_chk_addr(&init_net,
-					  &((struct sockaddr_in6 *) addr)->sin6_addr,
+					  &((struct sockaddr_in6 *) dst_in)->sin6_addr,
 					  dev, 1))
 				break;
 
diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index 55d093a36ae4..0f89909abce9 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -40,6 +40,7 @@
 #include <linux/idr.h>
 #include <linux/interrupt.h>
 #include <linux/rbtree.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/completion.h>
@@ -362,7 +363,9 @@ static void destroy_cm_id(struct iw_cm_id *cm_id)
 		 * In either case, must tell the provider to reject.
 		 */
 		cm_id_priv->state = IW_CM_STATE_DESTROYING;
+		spin_unlock_irqrestore(&cm_id_priv->lock, flags);
 		cm_id->device->iwcm->reject(cm_id, NULL, 0);
+		spin_lock_irqsave(&cm_id_priv->lock, flags);
 		break;
 	case IW_CM_STATE_CONN_SENT:
 	case IW_CM_STATE_DESTROYING:
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 51bd9669cb1f..f504c9b00c1b 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -38,6 +38,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/file.h>
 #include <linux/mount.h>
 #include <linux/cdev.h>
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index 4346a24568fb..bb96d3c4b0f4 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -34,6 +34,7 @@
 #include <linux/file.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/idr.h>
 #include <linux/in.h>
 #include <linux/in6.h>
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 8c46f2257098..7de02969ed7d 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -44,6 +44,7 @@
 #include <linux/mutex.h>
 #include <linux/kref.h>
 #include <linux/compat.h>
+#include <linux/sched.h>
 #include <linux/semaphore.h>
 
 #include <asm/uaccess.h>
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index d3fff9e008a3..aec0fbdfe7f0 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -40,6 +40,7 @@
 #include <linux/err.h>
 #include <linux/fs.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/file.h>
 #include <linux/mount.h>
 #include <linux/cdev.h>
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 6895523779d0..ed7175549ebd 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -37,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/list.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/ethtool.h>
 #include <linux/rtnetlink.h>
@@ -1199,11 +1200,14 @@ static int iwch_query_port(struct ib_device *ibdev,
 		props->state = IB_PORT_DOWN;
 	else {
 		inetdev = in_dev_get(netdev);
-		if (inetdev->ifa_list)
-			props->state = IB_PORT_ACTIVE;
-		else
+		if (inetdev) {
+			if (inetdev->ifa_list)
+				props->state = IB_PORT_ACTIVE;
+			else
+				props->state = IB_PORT_INIT;
+			in_dev_put(inetdev);
+		} else
 			props->state = IB_PORT_INIT;
-		in_dev_put(inetdev);
 	}
 
 	props->port_cap_flags =
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 6e8653471941..1cecf98829ac 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -29,6 +29,7 @@
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#include <linux/sched.h>
 #include "iwch_provider.h"
 #include "iwch.h"
 #include "iwch_cm.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 04e88b600558..013d1380e77c 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -31,6 +31,7 @@
  * SOFTWARE.
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/idr.h>
 #include <linux/pci.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
index b2a9d4c155d1..a805402dd4ae 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -37,6 +37,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <rdma/ib_verbs.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 6c21b4b5ec71..c0a03ac03ee7 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -33,6 +33,7 @@
 
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 
 #include "ipath_kernel.h"
 #include "ipath_verbs.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c
index 3a5a89b609c4..cb2d3ef2ae12 100644
--- a/drivers/infiniband/hw/ipath/ipath_qp.c
+++ b/drivers/infiniband/hw/ipath/ipath_qp.c
@@ -32,6 +32,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/sched.h>
 #include <linux/vmalloc.h>
 
 #include "ipath_verbs.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index 2296832f94da..1f95bbaf7602 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -31,6 +31,7 @@
  * SOFTWARE.
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 
 #include "ipath_verbs.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 6076cb61bf6a..7420715256a9 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -31,6 +31,7 @@
  * SOFTWARE.
  */
 
+#include <linux/sched.h>
 #include <rdma/ib_smi.h>
 
 #include "ipath_verbs.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_user_pages.c b/drivers/infiniband/hw/ipath/ipath_user_pages.c
index 855911e7396d..82878e348627 100644
--- a/drivers/infiniband/hw/ipath/ipath_user_pages.c
+++ b/drivers/infiniband/hw/ipath/ipath_user_pages.c
@@ -33,6 +33,7 @@
 
 #include <linux/mm.h>
 #include <linux/device.h>
+#include <linux/sched.h>
 
 #include "ipath_kernel.h"
 
diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.c b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
index 7bff4b9baa0a..be78f6643c06 100644
--- a/drivers/infiniband/hw/ipath/ipath_user_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
@@ -33,6 +33,7 @@
 #include <linux/types.h>
 #include <linux/device.h>
 #include <linux/dmapool.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/highmem.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c b/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c
index d73e32232879..6923e1d986da 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c
@@ -32,6 +32,7 @@
  */
 
 #include <linux/rculist.h>
+#include <linux/sched.h>
 
 #include "ipath_verbs.h"
 
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 0ba6ec876296..add9188663ff 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -426,7 +426,7 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep,
 	 * because we preallocate so many resources
 	 */
 	cls_session = iscsi_session_setup(&iscsi_iser_transport, shost,
-					  ISCSI_DEF_XMIT_CMDS_MAX,
+					  ISCSI_DEF_XMIT_CMDS_MAX, 0,
 					  sizeof(struct iscsi_iser_task),
 					  initial_cmdsn, 0);
 	if (!cls_session)
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 1148140d08a1..dee6706038aa 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -13,6 +13,7 @@
 #define EVDEV_BUFFER_SIZE	64
 
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/input/input.c b/drivers/input/input.c
index e828aab7dace..cc763c96fada 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -17,6 +17,7 @@
 #include <linux/random.h>
 #include <linux/major.h>
 #include <linux/proc_fs.h>
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/poll.h>
 #include <linux/device.h>
@@ -781,10 +782,29 @@ static unsigned int input_proc_devices_poll(struct file *file, poll_table *wait)
 	return 0;
 }
 
+union input_seq_state {
+	struct {
+		unsigned short pos;
+		bool mutex_acquired;
+	};
+	void *p;
+};
+
 static void *input_devices_seq_start(struct seq_file *seq, loff_t *pos)
 {
-	if (mutex_lock_interruptible(&input_mutex))
-		return NULL;
+	union input_seq_state *state = (union input_seq_state *)&seq->private;
+	int error;
+
+	/* We need to fit into seq->private pointer */
+	BUILD_BUG_ON(sizeof(union input_seq_state) != sizeof(seq->private));
+
+	error = mutex_lock_interruptible(&input_mutex);
+	if (error) {
+		state->mutex_acquired = false;
+		return ERR_PTR(error);
+	}
+
+	state->mutex_acquired = true;
 
 	return seq_list_start(&input_dev_list, *pos);
 }
@@ -794,9 +814,12 @@ static void *input_devices_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	return seq_list_next(v, &input_dev_list, pos);
 }
 
-static void input_devices_seq_stop(struct seq_file *seq, void *v)
+static void input_seq_stop(struct seq_file *seq, void *v)
 {
-	mutex_unlock(&input_mutex);
+	union input_seq_state *state = (union input_seq_state *)&seq->private;
+
+	if (state->mutex_acquired)
+		mutex_unlock(&input_mutex);
 }
 
 static void input_seq_print_bitmap(struct seq_file *seq, const char *name,
@@ -860,7 +883,7 @@ static int input_devices_seq_show(struct seq_file *seq, void *v)
 static const struct seq_operations input_devices_seq_ops = {
 	.start	= input_devices_seq_start,
 	.next	= input_devices_seq_next,
-	.stop	= input_devices_seq_stop,
+	.stop	= input_seq_stop,
 	.show	= input_devices_seq_show,
 };
 
@@ -880,40 +903,49 @@ static const struct file_operations input_devices_fileops = {
 
 static void *input_handlers_seq_start(struct seq_file *seq, loff_t *pos)
 {
-	if (mutex_lock_interruptible(&input_mutex))
-		return NULL;
+	union input_seq_state *state = (union input_seq_state *)&seq->private;
+	int error;
+
+	/* We need to fit into seq->private pointer */
+	BUILD_BUG_ON(sizeof(union input_seq_state) != sizeof(seq->private));
+
+	error = mutex_lock_interruptible(&input_mutex);
+	if (error) {
+		state->mutex_acquired = false;
+		return ERR_PTR(error);
+	}
+
+	state->mutex_acquired = true;
+	state->pos = *pos;
 
-	seq->private = (void *)(unsigned long)*pos;
 	return seq_list_start(&input_handler_list, *pos);
 }
 
 static void *input_handlers_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
-	seq->private = (void *)(unsigned long)(*pos + 1);
-	return seq_list_next(v, &input_handler_list, pos);
-}
+	union input_seq_state *state = (union input_seq_state *)&seq->private;
 
-static void input_handlers_seq_stop(struct seq_file *seq, void *v)
-{
-	mutex_unlock(&input_mutex);
+	state->pos = *pos + 1;
+	return seq_list_next(v, &input_handler_list, pos);
 }
 
 static int input_handlers_seq_show(struct seq_file *seq, void *v)
 {
 	struct input_handler *handler = container_of(v, struct input_handler, node);
+	union input_seq_state *state = (union input_seq_state *)&seq->private;
 
-	seq_printf(seq, "N: Number=%ld Name=%s",
-		   (unsigned long)seq->private, handler->name);
+	seq_printf(seq, "N: Number=%u Name=%s", state->pos, handler->name);
 	if (handler->fops)
 		seq_printf(seq, " Minor=%d", handler->minor);
 	seq_putc(seq, '\n');
 
 	return 0;
 }
+
 static const struct seq_operations input_handlers_seq_ops = {
 	.start	= input_handlers_seq_start,
 	.next	= input_handlers_seq_next,
-	.stop	= input_handlers_seq_stop,
+	.stop	= input_seq_stop,
 	.show	= input_handlers_seq_show,
 };
 
@@ -1273,6 +1305,7 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 		}						\
 	} while (0)
 
+#ifdef CONFIG_PM
 static void input_dev_reset(struct input_dev *dev, bool activate)
 {
 	if (!dev->event)
@@ -1287,7 +1320,6 @@ static void input_dev_reset(struct input_dev *dev, bool activate)
 	}
 }
 
-#ifdef CONFIG_PM
 static int input_dev_suspend(struct device *dev)
 {
 	struct input_dev *input_dev = to_input_dev(dev);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 901b2525993e..b1bd6dd32286 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -18,6 +18,7 @@
 #include <linux/input.h>
 #include <linux/kernel.h>
 #include <linux/major.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 2388cf578a62..79e3edcced1a 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -143,6 +143,7 @@ static const struct xpad_device {
 	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
@@ -209,6 +210,7 @@ static struct usb_device_id xpad_table [] = {
 	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x146b),		/* BigBen Interactive Controllers */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Rock Band Drums */
 	{ }
 };
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 4709e15af607..a6512372c7a3 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -574,11 +574,22 @@ static void atkbd_event_work(struct work_struct *work)
 
 	mutex_lock(&atkbd->event_mutex);
 
-	if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
-		atkbd_set_leds(atkbd);
+	if (!atkbd->enabled) {
+		/*
+		 * Serio ports are resumed asynchronously so while driver core
+		 * thinks that device is already fully operational in reality
+		 * it may not be ready yet. In this case we need to keep
+		 * rescheduling till reconnect completes.
+		 */
+		schedule_delayed_work(&atkbd->event_work,
+					msecs_to_jiffies(100));
+	} else {
+		if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
+			atkbd_set_leds(atkbd);
 
-	if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
-		atkbd_set_repeat_rate(atkbd);
+		if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
+			atkbd_set_repeat_rate(atkbd);
+	}
 
 	mutex_unlock(&atkbd->event_mutex);
 }
@@ -770,6 +781,30 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 	return 3;
 }
 
+static int atkbd_reset_state(struct atkbd *atkbd)
+{
+        struct ps2dev *ps2dev = &atkbd->ps2dev;
+	unsigned char param[1];
+
+/*
+ * Set the LEDs to a predefined state (all off).
+ */
+
+	param[0] = 0;
+	if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
+		return -1;
+
+/*
+ * Set autorepeat to fastest possible.
+ */
+
+	param[0] = 0;
+	if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
+		return -1;
+
+	return 0;
+}
+
 static int atkbd_activate(struct atkbd *atkbd)
 {
 	struct ps2dev *ps2dev = &atkbd->ps2dev;
@@ -852,29 +887,6 @@ static unsigned int atkbd_hp_forced_release_keys[] = {
 };
 
 /*
- * Inventec system with broken key release on volume keys
- */
-static unsigned int atkbd_inventec_forced_release_keys[] = {
-	0xae, 0xb0, -1U
-};
-
-/*
- * Perform fixup for HP Pavilion ZV6100 laptop that doesn't generate release
- * for its volume buttons
- */
-static unsigned int atkbd_hp_zv6100_forced_release_keys[] = {
-	0xae, 0xb0, -1U
-};
-
-/*
- * Perform fixup for HP (Compaq) Presario R4000 R4100 R4200 that don't generate
- * release for their volume buttons
- */
-static unsigned int atkbd_hp_r4000_forced_release_keys[] = {
-	0xae, 0xb0, -1U
-};
-
-/*
  * Samsung NC10,NC20 with Fn+F? key release not working
  */
 static unsigned int atkbd_samsung_forced_release_keys[] = {
@@ -882,14 +894,6 @@ static unsigned int atkbd_samsung_forced_release_keys[] = {
 };
 
 /*
- * The volume up and volume down special keys on a Fujitsu Amilo PA 1510 laptop
- * do not generate release events so we have to do it ourselves.
- */
-static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = {
-	0xb0, 0xae, -1U
-};
-
-/*
  * Amilo Pi 3525 key release for Fn+Volume keys not working
  */
 static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
@@ -911,6 +915,14 @@ static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
 };
 
 /*
+ * Many notebooks don't send key release event for volume up/down
+ * keys, with key list below common among them
+ */
+static unsigned int atkbd_volume_forced_release_keys[] = {
+	0xae, 0xb0, -1U
+};
+
+/*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
  */
@@ -1087,6 +1099,7 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 		}
 
 		atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
+		atkbd_reset_state(atkbd);
 		atkbd_activate(atkbd);
 
 	} else {
@@ -1267,6 +1280,7 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun
 
 		atkbd->dev = new_dev;
 		atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
+		atkbd_reset_state(atkbd);
 		atkbd_activate(atkbd);
 		atkbd_set_keycode_table(atkbd);
 		atkbd_set_device_attrs(atkbd);
@@ -1548,7 +1562,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
 		},
 		.callback = atkbd_setup_forced_release,
-		.driver_data = atkbd_hp_zv6100_forced_release_keys,
+		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
 		.ident = "HP Presario R4000",
@@ -1557,7 +1571,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
 		},
 		.callback = atkbd_setup_forced_release,
-		.driver_data = atkbd_hp_r4000_forced_release_keys,
+		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
 		.ident = "HP Presario R4100",
@@ -1566,7 +1580,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
 		},
 		.callback = atkbd_setup_forced_release,
-		.driver_data = atkbd_hp_r4000_forced_release_keys,
+		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
 		.ident = "HP Presario R4200",
@@ -1575,7 +1589,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
 		},
 		.callback = atkbd_setup_forced_release,
-		.driver_data = atkbd_hp_r4000_forced_release_keys,
+		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
 		.ident = "Inventec Symphony",
@@ -1584,7 +1598,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
 		},
 		.callback = atkbd_setup_forced_release,
-		.driver_data = atkbd_inventec_forced_release_keys,
+		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
 		.ident = "Samsung NC10",
@@ -1620,7 +1634,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
 		},
 		.callback = atkbd_setup_forced_release,
-		.driver_data = atkbd_amilo_pa1510_forced_release_keys,
+		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
 		.ident = "Fujitsu Amilo Pi 3525",
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
index e9d639ec283d..5f72440b50c8 100644
--- a/drivers/input/keyboard/hilkbd.c
+++ b/drivers/input/keyboard/hilkbd.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/hil.h>
 #include <linux/io.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <asm/irq.h>
 #ifdef CONFIG_HP300
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index 472b56639cdb..a99a04b03ee4 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index 216a559f55ea..ea821b546969 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -209,7 +209,7 @@ static inline int hp_sdc_rtc_read_rt(struct timeval *res) {
 
 /* Read the i8042 fast handshake timer */
 static inline int hp_sdc_rtc_read_fhs(struct timeval *res) {
-	uint64_t raw;
+	int64_t raw;
 	unsigned int tenms;
 
 	raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_FHS, 2);
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index c806fbf1e174..3b9f588fc747 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -106,8 +106,8 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
 	struct input_dev *input;
 	int err;
 
-	if (!pdata || !pdata->steps) {
-		dev_err(&pdev->dev, "invalid platform data\n");
+	if (!pdata) {
+		dev_err(&pdev->dev, "missing platform data\n");
 		return -ENOENT;
 	}
 
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index c4f42311fdec..b064419b90a2 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -230,7 +230,7 @@ out_err:
 	return err;
 }
 
-static int bbc_remove(struct of_device *op)
+static int __devexit bbc_remove(struct of_device *op)
 {
 	struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
 	struct input_dev *input_dev = state->input_dev;
@@ -308,7 +308,7 @@ out_err:
 	return err;
 }
 
-static int grover_remove(struct of_device *op)
+static int __devexit grover_remove(struct of_device *op)
 {
 	struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
 	struct grover_beep_info *info = &state->u.grover;
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index c5a49aba418f..d3f57245420a 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -30,6 +30,7 @@
  *		- first public version
  */
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 11fd038a078f..a932179c4c9e 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -936,6 +936,15 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "Medion MD 42200",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Medion"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2030"),
+		},
+		.driver_data = keymap_fs_amilo_pro_v2000
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "Medion MD 96500",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MEDIONPC"),
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index de745d751162..ab5dc5f5fd83 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -219,7 +219,7 @@ static const struct ps2pp_info *get_model_info(unsigned char model)
 				PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
 				PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL },
 		{ 72,	PS2PP_KIND_TRACKMAN,	0 },			/* T-CH11: TrackMan Marble */
-		{ 73,	0,			PS2PP_SIDE_BTN },
+		{ 73,	PS2PP_KIND_TRACKMAN,	PS2PP_SIDE_BTN },	/* TrackMan FX */
 		{ 75,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 76,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 79,	PS2PP_KIND_TRACKMAN,	PS2PP_WHEEL },		/* TrackMan with wheel */
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index b66ff1ac7dea..f4a61252bcc9 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -652,6 +652,16 @@ static const struct dmi_system_id toshiba_dmi_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M300"),
 		},
+
+	},
+	{
+		.ident = "Toshiba Portege M300",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Portable PC"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Version 1.0"),
+		},
+
 	},
 	{ }
 };
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 966b8868f792..a13d80f7da17 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -13,6 +13,7 @@
 #define MOUSEDEV_MINORS		32
 #define MOUSEDEV_MIX		31
 
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/poll.h>
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index c4b3fbd1a80f..aa533ceffe34 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -4,7 +4,7 @@
 config SERIO
 	tristate "Serial I/O support" if EMBEDDED || !X86
 	default y
-	---help---
+	help
 	  Say Yes here if you have any input device that uses serial I/O to
 	  communicate with the system. This includes the
 	  		* standard AT keyboard and PS/2 mouse *
@@ -22,7 +22,7 @@ config SERIO_I8042
 	tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
 	default y
 	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN
-	---help---
+	help
 	  i8042 is the chip over which the standard AT keyboard and PS/2
 	  mouse are connected to the computer. If you use these devices,
 	  you'll need to say Y here.
@@ -35,7 +35,7 @@ config SERIO_I8042
 config SERIO_SERPORT
 	tristate "Serial port line discipline"
 	default y
-	---help---
+	help
 	  Say Y here if you plan to use an input device (mouse, joystick,
 	  tablet, 6dof) that communicates over the RS232 serial (COM) port.
 
@@ -49,7 +49,7 @@ config SERIO_SERPORT
 config SERIO_CT82C710
 	tristate "ct82c710 Aux port controller"
 	depends on X86
-	---help---
+	help
 	  Say Y here if you have a Texas Instruments TravelMate notebook
 	  equipped with the ct82c710 chip and want to use a mouse connected
 	  to the "QuickPort".
@@ -66,7 +66,7 @@ config SERIO_Q40KBD
 config SERIO_PARKBD
 	tristate "Parallel port keyboard adapter"
 	depends on PARPORT
-	---help---
+	help
 	  Say Y here if you built a simple parallel port adapter to attach
 	  an additional AT keyboard, XT keyboard or PS/2 mouse.
 
@@ -124,7 +124,7 @@ config HP_SDC
 	tristate "HP System Device Controller i8042 Support"
 	depends on (GSC || HP300) && SERIO
 	default y
-	---help---
+	help
 	  This option enables support for the "System Device
 	  Controller", an i8042 carrying microcode to manage a
 	  few miscellaneous devices on some Hewlett Packard systems.
@@ -168,6 +168,7 @@ config SERIO_MACEPS2
 
 config SERIO_LIBPS2
 	tristate "PS/2 driver library" if EMBEDDED
+	depends on SERIO_I8042 || SERIO_I8042=n
 	help
 	  Say Y here if you are using a driver for device connected
 	  to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index a39bc4eb902b..a537925f7651 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -327,6 +327,17 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 		},
 	},
 	{
+		/*
+		 * Reset and GET ID commands issued via KBD port are
+		 * sometimes being delivered to AUX3.
+		 */
+		.ident = "Sony Vaio FZ-240E",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"),
+		},
+	},
+	{
 		.ident = "Amoi M636/A737",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."),
@@ -661,7 +672,7 @@ static void i8042_pnp_exit(void)
 static int __init i8042_pnp_init(void)
 {
 	char kbd_irq_str[4] = { 0 }, aux_irq_str[4] = { 0 };
-	int pnp_data_busted = false;
+	bool pnp_data_busted = false;
 	int err;
 
 #ifdef CONFIG_X86
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index bc56e52b945f..a31578170ccc 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -609,6 +609,8 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (str & I8042_STR_OBF) {
 		data = i8042_read_data();
+		dbg("%02x <- i8042 (aux_test_irq, %s)",
+			data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 		if (i8042_irq_being_tested &&
 		    data == 0xa5 && (str & I8042_STR_AUXDATA))
 			complete(&i8042_aux_irq_delivered);
@@ -750,6 +752,7 @@ static int __init i8042_check_aux(void)
  * AUX IRQ was never delivered so we need to flush the controller to
  * get rid of the byte we put there; otherwise keyboard may not work.
  */
+		dbg("     -- i8042 (aux irq test timeout)");
 		i8042_flush();
 		retval = -1;
 	}
diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
index 769ba65a585a..f3876acc3e83 100644
--- a/drivers/input/serio/libps2.c
+++ b/drivers/input/serio/libps2.c
@@ -13,6 +13,7 @@
 
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index b03009bb7468..27fdaaffbb40 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  */
 
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/poll.h>
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index b9694b6445d0..6d345112bcb7 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -15,6 +15,7 @@
 
 #include <asm/uaccess.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index f06332c9e21b..c21e6d3a8844 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -645,7 +645,7 @@ static int __devinit ad7879_probe(struct spi_device *spi)
 		kfree(ts);
 	}
 
-	return 0;
+	return error;
 }
 
 static int __devexit ad7879_remove(struct spi_device *spi)
@@ -732,7 +732,7 @@ static int __devinit ad7879_probe(struct i2c_client *client,
 		kfree(ts);
 	}
 
-	return 0;
+	return error;
 }
 
 static int __devexit ad7879_remove(struct i2c_client *client)
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 2d8352419c0d..65bf91e16a42 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -603,7 +603,7 @@ static void capi_recv_message(struct capi20_appl *ap, struct sk_buff *skb)
 
 	if (CAPIMSG_CMD(skb->data) == CAPI_CONNECT_B3_CONF) {
 		u16 info = CAPIMSG_U16(skb->data, 12); // Info field
-		if (info == 0) {
+		if ((info & 0xff00) == 0) {
 			mutex_lock(&cdev->ncci_list_mtx);
 			capincci_alloc(cdev, CAPIMSG_NCCI(skb->data));
 			mutex_unlock(&cdev->ncci_list_mtx);
diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c
index 650120261abf..3e6d17f42a98 100644
--- a/drivers/isdn/capi/capidrv.c
+++ b/drivers/isdn/capi/capidrv.c
@@ -40,7 +40,7 @@ static int debugmode = 0;
 MODULE_DESCRIPTION("CAPI4Linux: Interface to ISDN4Linux");
 MODULE_AUTHOR("Carsten Paeth");
 MODULE_LICENSE("GPL");
-module_param(debugmode, uint, 0);
+module_param(debugmode, uint, S_IRUGO|S_IWUSR);
 
 /* -------- type definitions ----------------------------------------- */
 
@@ -671,8 +671,8 @@ static void n0(capidrv_contr * card, capidrv_ncci * ncci)
 				 NULL,	/* Useruserdata */   /* $$$$ */
 				 NULL	/* Facilitydataarray */
 	);
-	send_message(card, &cmsg);
 	plci_change_state(card, ncci->plcip, EV_PLCI_DISCONNECT_REQ);
+	send_message(card, &cmsg);
 
 	cmd.command = ISDN_STAT_BHUP;
 	cmd.driver = card->myid;
@@ -924,8 +924,8 @@ static void handle_incoming_call(capidrv_contr * card, _cmsg * cmsg)
 		 */
 		capi_cmsg_answer(cmsg);
 		cmsg->Reject = 1;	/* ignore */
-		send_message(card, cmsg);
 		plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT);
+		send_message(card, cmsg);
 		printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s ignored\n",
 			card->contrnr,
 			cmd.parm.setup.phone,
@@ -974,8 +974,8 @@ static void handle_incoming_call(capidrv_contr * card, _cmsg * cmsg)
 	case 2:		/* Call will be rejected. */
 		capi_cmsg_answer(cmsg);
 		cmsg->Reject = 2;	/* reject call, normal call clearing */
-		send_message(card, cmsg);
 		plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT);
+		send_message(card, cmsg);
 		break;
 
 	default:
@@ -983,8 +983,8 @@ static void handle_incoming_call(capidrv_contr * card, _cmsg * cmsg)
 		capi_cmsg_answer(cmsg);
 		cmsg->Reject = 8;	/* reject call,
 					   destination out of order */
-		send_message(card, cmsg);
 		plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT);
+		send_message(card, cmsg);
 		break;
 	}
 	return;
@@ -1020,8 +1020,8 @@ static void handle_plci(_cmsg * cmsg)
 		card->bchans[plcip->chan].disconnecting = 1;
 		plci_change_state(card, plcip, EV_PLCI_DISCONNECT_IND);
 		capi_cmsg_answer(cmsg);
-		send_message(card, cmsg);
 		plci_change_state(card, plcip, EV_PLCI_DISCONNECT_RESP);
+		send_message(card, cmsg);
 		break;
 
 	case CAPI_DISCONNECT_CONF:	/* plci */
@@ -1078,8 +1078,8 @@ static void handle_plci(_cmsg * cmsg)
 
 		if (card->bchans[plcip->chan].incoming) {
 			capi_cmsg_answer(cmsg);
-			send_message(card, cmsg);
 			plci_change_state(card, plcip, EV_PLCI_CONNECT_ACTIVE_IND);
+			send_message(card, cmsg);
 		} else {
 			capidrv_ncci *nccip;
 			capi_cmsg_answer(cmsg);
@@ -1098,13 +1098,14 @@ static void handle_plci(_cmsg * cmsg)
 						 NULL	/* NCPI */
 			);
 			nccip->msgid = cmsg->Messagenumber;
+			plci_change_state(card, plcip,
+					  EV_PLCI_CONNECT_ACTIVE_IND);
+			ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_REQ);
 			send_message(card, cmsg);
 			cmd.command = ISDN_STAT_DCONN;
 			cmd.driver = card->myid;
 			cmd.arg = plcip->chan;
 			card->interface.statcallb(&cmd);
-			plci_change_state(card, plcip, EV_PLCI_CONNECT_ACTIVE_IND);
-			ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_REQ);
 		}
 		break;
 
@@ -1193,8 +1194,8 @@ static void handle_ncci(_cmsg * cmsg)
 			goto notfound;
 
 		capi_cmsg_answer(cmsg);
-		send_message(card, cmsg);
 		ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_ACTIVE_IND);
+		send_message(card, cmsg);
 
 		cmd.command = ISDN_STAT_BCONN;
 		cmd.driver = card->myid;
@@ -1222,8 +1223,8 @@ static void handle_ncci(_cmsg * cmsg)
 							  0,	/* Reject */
 							  NULL	/* NCPI */
 				);
-				send_message(card, cmsg);
 				ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_RESP);
+				send_message(card, cmsg);
 				break;
 			}
 			printk(KERN_ERR "capidrv-%d: no mem for ncci, sorry\n",							card->contrnr);
@@ -1299,8 +1300,8 @@ static void handle_ncci(_cmsg * cmsg)
 		card->bchans[nccip->chan].disconnecting = 1;
 		ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_IND);
 		capi_cmsg_answer(cmsg);
-		send_message(card, cmsg);
 		ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_RESP);
+		send_message(card, cmsg);
 		break;
 
 	case CAPI_DISCONNECT_B3_CONF:	/* ncci */
@@ -2014,8 +2015,8 @@ static void send_listen(capidrv_contr *card)
 			     card->cipmask,
 			     card->cipmask2,
 			     NULL, NULL);
-	send_message(card, &cmdcmsg);
 	listen_change_state(card, EV_LISTEN_REQ);
+	send_message(card, &cmdcmsg);
 }
 
 static void listentimerfunc(unsigned long x)
diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index 57d26360f64e..dc506ab99cac 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -18,6 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/proc_fs.h>
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/skbuff.h>
 #include <linux/workqueue.h>
diff --git a/drivers/isdn/divert/divert_procfs.c b/drivers/isdn/divert/divert_procfs.c
index 8b256a617c8a..3697c409bec6 100644
--- a/drivers/isdn/divert/divert_procfs.c
+++ b/drivers/isdn/divert/divert_procfs.c
@@ -16,6 +16,7 @@
 #else
 #include <linux/fs.h>
 #endif
+#include <linux/sched.h>
 #include <linux/isdnif.h>
 #include <net/net_namespace.h>
 #include "isdn_divert.h"
diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index 234cc5d53312..44a58e6f8f65 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -334,7 +334,14 @@ static inline int iraw_loop(unsigned char c, unsigned char *src, int numbytes,
 	return startbytes - numbytes;
 }
 
-/* process a block of data received from the device
+/**
+ * gigaset_m10x_input() - process a block of data received from the device
+ * @inbuf:	received data and device descriptor structure.
+ *
+ * Called by hardware module {ser,usb}_gigaset with a block of received
+ * bytes. Separates the bytes received over the serial data channel into
+ * user data and command replies (locked/unlocked) according to the
+ * current state of the interface.
  */
 void gigaset_m10x_input(struct inbuf_t *inbuf)
 {
@@ -543,16 +550,17 @@ static struct sk_buff *iraw_encode(struct sk_buff *skb, int head, int tail)
 	return iraw_skb;
 }
 
-/* gigaset_send_skb
- * called by common.c to queue an skb for sending
- * and start transmission if necessary
- * parameters:
- *	B Channel control structure
- *	skb
+/**
+ * gigaset_m10x_send_skb() - queue an skb for sending
+ * @bcs:	B channel descriptor structure.
+ * @skb:	data to send.
+ *
+ * Called by i4l.c to encode and queue an skb for sending, and start
+ * transmission if necessary.
+ *
  * Return value:
- *	number of bytes accepted for sending
- *	(skb->len if ok, 0 if out of buffer space)
- *	or error code (< 0, eg. -EINVAL)
+ *	number of bytes accepted for sending (skb->len) if ok,
+ *	error code < 0 (eg. -ENOMEM) on error
  */
 int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb)
 {
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 781c4041f7b0..5ed1d99eb9f3 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -134,6 +134,7 @@ struct bas_cardstate {
 #define BS_ATRDPEND	0x040	/* urb_cmd_in in use */
 #define BS_ATWRPEND	0x080	/* urb_cmd_out in use */
 #define BS_SUSPEND	0x100	/* USB port suspended */
+#define BS_RESETTING	0x200	/* waiting for HD_RESET_INTERRUPT_PIPE_ACK */
 
 
 static struct gigaset_driver *driver = NULL;
@@ -319,6 +320,21 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
 	return -EINVAL;
 }
 
+/* set/clear bits in base connection state, return previous state
+ */
+static inline int update_basstate(struct bas_cardstate *ucs,
+				  int set, int clear)
+{
+	unsigned long flags;
+	int state;
+
+	spin_lock_irqsave(&ucs->lock, flags);
+	state = ucs->basstate;
+	ucs->basstate = (state & ~clear) | set;
+	spin_unlock_irqrestore(&ucs->lock, flags);
+	return state;
+}
+
 /* error_hangup
  * hang up any existing connection because of an unrecoverable error
  * This function may be called from any context and takes care of scheduling
@@ -350,12 +366,9 @@ static inline void error_hangup(struct bc_state *bcs)
  */
 static inline void error_reset(struct cardstate *cs)
 {
-	/* close AT command channel to recover (ignore errors) */
-	req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
-
-	//FIXME try to recover without bothering the user
-	dev_err(cs->dev,
-	    "unrecoverable error - please disconnect Gigaset base to reset\n");
+	/* reset interrupt pipe to recover (ignore errors) */
+	update_basstate(cs->hw.bas, BS_RESETTING, 0);
+	req_submit(cs->bcs, HD_RESET_INTERRUPT_PIPE, 0, BAS_TIMEOUT);
 }
 
 /* check_pending
@@ -398,8 +411,13 @@ static void check_pending(struct bas_cardstate *ucs)
 	case HD_DEVICE_INIT_ACK:		/* no reply expected */
 		ucs->pending = 0;
 		break;
-	/* HD_READ_ATMESSAGE, HD_WRITE_ATMESSAGE, HD_RESET_INTERRUPTPIPE
-	 * are handled separately and should never end up here
+	case HD_RESET_INTERRUPT_PIPE:
+		if (!(ucs->basstate & BS_RESETTING))
+			ucs->pending = 0;
+		break;
+	/*
+	 * HD_READ_ATMESSAGE and HD_WRITE_ATMESSAGE are handled separately
+	 * and should never end up here
 	 */
 	default:
 		dev_warn(&ucs->interface->dev,
@@ -449,21 +467,6 @@ static void cmd_in_timeout(unsigned long data)
 	error_reset(cs);
 }
 
-/* set/clear bits in base connection state, return previous state
- */
-inline static int update_basstate(struct bas_cardstate *ucs,
-				  int set, int clear)
-{
-	unsigned long flags;
-	int state;
-
-	spin_lock_irqsave(&ucs->lock, flags);
-	state = ucs->basstate;
-	ucs->basstate = (state & ~clear) | set;
-	spin_unlock_irqrestore(&ucs->lock, flags);
-	return state;
-}
-
 /* read_ctrl_callback
  * USB completion handler for control pipe input
  * called by the USB subsystem in interrupt context
@@ -762,7 +765,8 @@ static void read_int_callback(struct urb *urb)
 		break;
 
 	case HD_RESET_INTERRUPT_PIPE_ACK:
-		gig_dbg(DEBUG_USBREQ, "HD_RESET_INTERRUPT_PIPE_ACK");
+		update_basstate(ucs, 0, BS_RESETTING);
+		dev_notice(cs->dev, "interrupt pipe reset\n");
 		break;
 
 	case HD_SUSPEND_END:
@@ -1331,28 +1335,24 @@ static void read_iso_tasklet(unsigned long data)
 		rcvbuf = urb->transfer_buffer;
 		totleft = urb->actual_length;
 		for (frame = 0; totleft > 0 && frame < BAS_NUMFRAMES; frame++) {
-			if (unlikely(urb->iso_frame_desc[frame].status)) {
+			numbytes = urb->iso_frame_desc[frame].actual_length;
+			if (unlikely(urb->iso_frame_desc[frame].status))
 				dev_warn(cs->dev,
-					 "isochronous read: frame %d: %s\n",
-					 frame,
+					 "isochronous read: frame %d[%d]: %s\n",
+					 frame, numbytes,
 					 get_usb_statmsg(
 					    urb->iso_frame_desc[frame].status));
-				break;
-			}
-			numbytes = urb->iso_frame_desc[frame].actual_length;
-			if (unlikely(numbytes > BAS_MAXFRAME)) {
+			if (unlikely(numbytes > BAS_MAXFRAME))
 				dev_warn(cs->dev,
 					 "isochronous read: frame %d: "
 					 "numbytes (%d) > BAS_MAXFRAME\n",
 					 frame, numbytes);
-				break;
-			}
 			if (unlikely(numbytes > totleft)) {
 				dev_warn(cs->dev,
 					 "isochronous read: frame %d: "
 					 "numbytes (%d) > totleft (%d)\n",
 					 frame, numbytes, totleft);
-				break;
+				numbytes = totleft;
 			}
 			offset = urb->iso_frame_desc[frame].offset;
 			if (unlikely(offset + numbytes > BAS_INBUFSIZE)) {
@@ -1361,7 +1361,7 @@ static void read_iso_tasklet(unsigned long data)
 					 "offset (%d) + numbytes (%d) "
 					 "> BAS_INBUFSIZE\n",
 					 frame, offset, numbytes);
-				break;
+				numbytes = BAS_INBUFSIZE - offset;
 			}
 			gigaset_isoc_receive(rcvbuf + offset, numbytes, bcs);
 			totleft -= numbytes;
@@ -1433,6 +1433,7 @@ static void req_timeout(unsigned long data)
 
 	case HD_CLOSE_ATCHANNEL:
 		dev_err(bcs->cs->dev, "timeout closing AT channel\n");
+		error_reset(bcs->cs);
 		break;
 
 	case HD_CLOSE_B2CHANNEL:
@@ -1442,6 +1443,13 @@ static void req_timeout(unsigned long data)
 		error_reset(bcs->cs);
 		break;
 
+	case HD_RESET_INTERRUPT_PIPE:
+		/* error recovery escalation */
+		dev_err(bcs->cs->dev,
+			"reset interrupt pipe timeout, attempting USB reset\n");
+		usb_queue_reset_device(bcs->cs->hw.bas->interface);
+		break;
+
 	default:
 		dev_warn(bcs->cs->dev, "request 0x%02x timed out, clearing\n",
 			 pending);
@@ -1934,6 +1942,15 @@ static int gigaset_write_cmd(struct cardstate *cs,
 		goto notqueued;
 	}
 
+	/* translate "+++" escape sequence sent as a single separate command
+	 * into "close AT channel" command for error recovery
+	 * The next command will reopen the AT channel automatically.
+	 */
+	if (len == 3 && !memcmp(buf, "+++", 3)) {
+		rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
+		goto notqueued;
+	}
+
 	if (len > IF_WRITEBUF)
 		len = IF_WRITEBUF;
 	if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index e4141bf8b2f3..33dcd8d72b7c 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -22,6 +22,12 @@
 #define DRIVER_AUTHOR "Hansjoerg Lipp <hjlipp@web.de>, Tilman Schmidt <tilman@imap.cc>, Stefan Eilers"
 #define DRIVER_DESC "Driver for Gigaset 307x"
 
+#ifdef CONFIG_GIGASET_DEBUG
+#define DRIVER_DESC_DEBUG " (debug build)"
+#else
+#define DRIVER_DESC_DEBUG ""
+#endif
+
 /* Module parameters */
 int gigaset_debuglevel = DEBUG_DEFAULT;
 EXPORT_SYMBOL_GPL(gigaset_debuglevel);
@@ -32,6 +38,17 @@ MODULE_PARM_DESC(debug, "debug level");
 #define VALID_MINOR	0x01
 #define VALID_ID	0x02
 
+/**
+ * gigaset_dbg_buffer() - dump data in ASCII and hex for debugging
+ * @level:	debugging level.
+ * @msg:	message prefix.
+ * @len:	number of bytes to dump.
+ * @buf:	data to dump.
+ *
+ * If the current debugging level includes one of the bits set in @level,
+ * @len bytes starting at @buf are logged to dmesg at KERN_DEBUG prio,
+ * prefixed by the text @msg.
+ */
 void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
 			size_t len, const unsigned char *buf)
 {
@@ -274,6 +291,20 @@ static void clear_events(struct cardstate *cs)
 	spin_unlock_irqrestore(&cs->ev_lock, flags);
 }
 
+/**
+ * gigaset_add_event() - add event to device event queue
+ * @cs:		device descriptor structure.
+ * @at_state:	connection state structure.
+ * @type:	event type.
+ * @ptr:	pointer parameter for event.
+ * @parameter:	integer parameter for event.
+ * @arg:	pointer parameter for event.
+ *
+ * Allocate an event queue entry from the device's event queue, and set it up
+ * with the parameters given.
+ *
+ * Return value: added event
+ */
 struct event_t *gigaset_add_event(struct cardstate *cs,
 				  struct at_state_t *at_state, int type,
 				  void *ptr, int parameter, void *arg)
@@ -398,6 +429,15 @@ static void make_invalid(struct cardstate *cs, unsigned mask)
 	spin_unlock_irqrestore(&drv->lock, flags);
 }
 
+/**
+ * gigaset_freecs() - free all associated ressources of a device
+ * @cs:		device descriptor structure.
+ *
+ * Stops all tasklets and timers, unregisters the device from all
+ * subsystems it was registered to, deallocates the device structure
+ * @cs and all structures referenced from it.
+ * Operations on the device should be stopped before calling this.
+ */
 void gigaset_freecs(struct cardstate *cs)
 {
 	int i;
@@ -506,7 +546,12 @@ static void gigaset_inbuf_init(struct inbuf_t *inbuf, struct bc_state *bcs,
 	inbuf->inputstate = inputstate;
 }
 
-/* append received bytes to inbuf */
+/**
+ * gigaset_fill_inbuf() - append received data to input buffer
+ * @inbuf:	buffer structure.
+ * @src:	received data.
+ * @numbytes:	number of bytes received.
+ */
 int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
 		       unsigned numbytes)
 {
@@ -606,20 +651,22 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs,
 	return NULL;
 }
 
-/* gigaset_initcs
+/**
+ * gigaset_initcs() - initialize device structure
+ * @drv:	hardware driver the device belongs to
+ * @channels:	number of B channels supported by device
+ * @onechannel:	!=0 if B channel data and AT commands share one
+ *		    communication channel (M10x),
+ *		==0 if B channels have separate communication channels (base)
+ * @ignoreframes:	number of frames to ignore after setting up B channel
+ * @cidmode:	!=0: start in CallID mode
+ * @modulename:	name of driver module for LL registration
+ *
  * Allocate and initialize cardstate structure for Gigaset driver
  * Calls hardware dependent gigaset_initcshw() function
  * Calls B channel initialization function gigaset_initbcs() for each B channel
- * parameters:
- *	drv		hardware driver the device belongs to
- *	channels	number of B channels supported by device
- *	onechannel	!=0: B channel data and AT commands share one
- *			     communication channel
- *			==0: B channels have separate communication channels
- *	ignoreframes	number of frames to ignore after setting up B channel
- *	cidmode		!=0: start in CallID mode
- *	modulename	name of driver module (used for I4L registration)
- * return value:
+ *
+ * Return value:
  *	pointer to cardstate structure
  */
 struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
@@ -837,6 +884,17 @@ static void cleanup_cs(struct cardstate *cs)
 }
 
 
+/**
+ * gigaset_start() - start device operations
+ * @cs:		device descriptor structure.
+ *
+ * Prepares the device for use by setting up communication parameters,
+ * scheduling an EV_START event to initiate device initialization, and
+ * waiting for completion of the initialization.
+ *
+ * Return value:
+ *	1 - success, 0 - error
+ */
 int gigaset_start(struct cardstate *cs)
 {
 	unsigned long flags;
@@ -879,9 +937,15 @@ error:
 }
 EXPORT_SYMBOL_GPL(gigaset_start);
 
-/* gigaset_shutdown
- * check if a device is associated to the cardstate structure and stop it
- * return value: 0 if ok, -1 if no device was associated
+/**
+ * gigaset_shutdown() - shut down device operations
+ * @cs:		device descriptor structure.
+ *
+ * Deactivates the device by scheduling an EV_SHUTDOWN event and
+ * waiting for completion of the shutdown.
+ *
+ * Return value:
+ *	0 - success, -1 - error (no device associated)
  */
 int gigaset_shutdown(struct cardstate *cs)
 {
@@ -912,6 +976,13 @@ exit:
 }
 EXPORT_SYMBOL_GPL(gigaset_shutdown);
 
+/**
+ * gigaset_stop() - stop device operations
+ * @cs:		device descriptor structure.
+ *
+ * Stops operations on the device by scheduling an EV_STOP event and
+ * waiting for completion of the shutdown.
+ */
 void gigaset_stop(struct cardstate *cs)
 {
 	mutex_lock(&cs->mutex);
@@ -1020,6 +1091,14 @@ struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty)
 	return gigaset_get_cs_by_minor(tty->index + tty->driver->minor_start);
 }
 
+/**
+ * gigaset_freedriver() - free all associated ressources of a driver
+ * @drv:	driver descriptor structure.
+ *
+ * Unregisters the driver from the system and deallocates the driver
+ * structure @drv and all structures referenced from it.
+ * All devices should be shut down before calling this.
+ */
 void gigaset_freedriver(struct gigaset_driver *drv)
 {
 	unsigned long flags;
@@ -1035,14 +1114,16 @@ void gigaset_freedriver(struct gigaset_driver *drv)
 }
 EXPORT_SYMBOL_GPL(gigaset_freedriver);
 
-/* gigaset_initdriver
+/**
+ * gigaset_initdriver() - initialize driver structure
+ * @minor:	First minor number
+ * @minors:	Number of minors this driver can handle
+ * @procname:	Name of the driver
+ * @devname:	Name of the device files (prefix without minor number)
+ *
  * Allocate and initialize gigaset_driver structure. Initialize interface.
- * parameters:
- *	minor		First minor number
- *	minors		Number of minors this driver can handle
- *	procname	Name of the driver
- *	devname		Name of the device files (prefix without minor number)
- * return value:
+ *
+ * Return value:
  *	Pointer to the gigaset_driver structure on success, NULL on failure.
  */
 struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors,
@@ -1095,6 +1176,13 @@ error:
 }
 EXPORT_SYMBOL_GPL(gigaset_initdriver);
 
+/**
+ * gigaset_blockdriver() - block driver
+ * @drv:	driver descriptor structure.
+ *
+ * Prevents the driver from attaching new devices, in preparation for
+ * deregistration.
+ */
 void gigaset_blockdriver(struct gigaset_driver *drv)
 {
 	drv->blocked = 1;
@@ -1110,7 +1198,7 @@ static int __init gigaset_init_module(void)
 	if (gigaset_debuglevel == 1)
 		gigaset_debuglevel = DEBUG_DEFAULT;
 
-	pr_info(DRIVER_DESC "\n");
+	pr_info(DRIVER_DESC DRIVER_DESC_DEBUG "\n");
 	return 0;
 }
 
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index 2d91049571a4..cc768caa38f5 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -207,7 +207,6 @@ struct reply_t gigaset_tab_nocid[] =
 	/* leave dle mode */
 	{RSP_INIT,      0,  0,SEQ_DLE0,           201, 5, {0},             "^SDLE=0\r"},
 	{RSP_OK,      201,201, -1,                202,-1},
-	//{RSP_ZDLE,    202,202,  0,                202, 0, {ACT_ERROR}},//DELETE
 	{RSP_ZDLE,    202,202,  0,                  0, 0, {ACT_DLE0}},
 	{RSP_NODEV,   200,249, -1,                  0, 0, {ACT_FAKEDLE0}},
 	{RSP_ERROR,   200,249, -1,                  0, 0, {ACT_FAILDLE0}},
@@ -265,6 +264,7 @@ struct reply_t gigaset_tab_nocid[] =
 	{EV_SHUTDOWN,  -1, -1, -1,                 -1,-1, {ACT_SHUTDOWN}}, //FIXME
 
 	/* misc. */
+	{RSP_ERROR,    -1, -1, -1,                 -1, -1, {ACT_ERROR} },
 	{RSP_EMPTY,    -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
 	{RSP_ZCFGT,    -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
 	{RSP_ZCFG,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
@@ -328,10 +328,9 @@ struct reply_t gigaset_tab_cid[] =
 	{RSP_INIT,     -1, -1,SEQ_HUP,            401, 5, {0},             "+VLS=0\r"}, /* hang up */ //-1,-1?
 	{RSP_OK,      401,401, -1,                402, 5},
 	{RSP_ZVLS,    402,402,  0,                403, 5},
-	{RSP_ZSAU,    403,403,ZSAU_DISCONNECT_REQ, -1,-1, {ACT_DEBUG}}, /* if not remote hup */
-	//{RSP_ZSAU,    403,403,ZSAU_NULL,          401, 0, {ACT_ERROR}}, //DELETE//FIXME -> DLE0 // should we do this _before_ hanging up for base driver?
-	{RSP_ZSAU,    403,403,ZSAU_NULL,            0, 0, {ACT_DISCONNECT}}, //FIXME -> DLE0 // should we do this _before_ hanging up for base driver?
-	{RSP_NODEV,   401,403, -1,                  0, 0, {ACT_FAKEHUP}}, //FIXME -> DLE0 // should we do this _before_ hanging up for base driver?
+	{RSP_ZSAU,    403, 403, ZSAU_DISCONNECT_REQ, -1, -1, {ACT_DEBUG} },
+	{RSP_ZSAU,    403, 403, ZSAU_NULL,            0,  0, {ACT_DISCONNECT} },
+	{RSP_NODEV,   401, 403, -1,                   0,  0, {ACT_FAKEHUP} },
 	{RSP_ERROR,   401,401, -1,                  0, 0, {ACT_ABORTHUP}},
 	{EV_TIMEOUT,  401,403, -1,                  0, 0, {ACT_ABORTHUP}},
 
@@ -474,8 +473,13 @@ static int cid_of_response(char *s)
 	//FIXME is ;<digit>+ at end of non-CID response really impossible?
 }
 
-/* This function will be called via task queue from the callback handler.
- * We received a modem response and have to handle it..
+/**
+ * gigaset_handle_modem_response() - process received modem response
+ * @cs:		device descriptor structure.
+ *
+ * Called by asyncdata/isocdata if a block of data received from the
+ * device must be processed as a modem command response. The data is
+ * already in the cs structure.
  */
 void gigaset_handle_modem_response(struct cardstate *cs)
 {
@@ -707,6 +711,11 @@ static void disconnect(struct at_state_t **at_state_p)
 	if (bcs) {
 		/* B channel assigned: invoke hardware specific handler */
 		cs->ops->close_bchannel(bcs);
+		/* notify LL */
+		if (bcs->chstate & (CHS_D_UP | CHS_NOTIFY_LL)) {
+			bcs->chstate &= ~(CHS_D_UP | CHS_NOTIFY_LL);
+			gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP);
+		}
 	} else {
 		/* no B channel assigned: just deallocate */
 		spin_lock_irqsave(&cs->lock, flags);
@@ -1429,11 +1438,12 @@ static void do_action(int action, struct cardstate *cs,
 		cs->gotfwver = -1;
 		dev_err(cs->dev, "could not read firmware version.\n");
 		break;
-#ifdef CONFIG_GIGASET_DEBUG
 	case ACT_ERROR:
-		*p_genresp = 1;
-		*p_resp_code = RSP_ERROR;
+		gig_dbg(DEBUG_ANY, "%s: ERROR response in ConState %d",
+			__func__, at_state->ConState);
+		cs->cur_at_seq = SEQ_NONE;
 		break;
+#ifdef CONFIG_GIGASET_DEBUG
 	case ACT_TEST:
 		{
 			static int count = 3; //2; //1;
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index 9b22f9cf2f33..654489d836cd 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -51,6 +51,12 @@ static int writebuf_from_LL(int driverID, int channel, int ack,
 		return -ENODEV;
 	}
 	bcs = &cs->bcs[channel];
+
+	/* can only handle linear sk_buffs */
+	if (skb_linearize(skb) < 0) {
+		dev_err(cs->dev, "%s: skb_linearize failed\n", __func__);
+		return -ENOMEM;
+	}
 	len = skb->len;
 
 	gig_dbg(DEBUG_LLDATA,
@@ -79,6 +85,14 @@ static int writebuf_from_LL(int driverID, int channel, int ack,
 	return cs->ops->send_skb(bcs, skb);
 }
 
+/**
+ * gigaset_skb_sent() - acknowledge sending an skb
+ * @bcs:	B channel descriptor structure.
+ * @skb:	sent data.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when the data in a
+ * skb has been successfully sent, for signalling completion to the LL.
+ */
 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
 {
 	unsigned len;
@@ -455,6 +469,15 @@ int gigaset_isdn_setup_accept(struct at_state_t *at_state)
 	return 0;
 }
 
+/**
+ * gigaset_isdn_icall() - signal incoming call
+ * @at_state:	connection state structure.
+ *
+ * Called by main module to notify the LL that an incoming call has been
+ * received. @at_state contains the parameters of the call.
+ *
+ * Return value: call disposition (ICALL_*)
+ */
 int gigaset_isdn_icall(struct at_state_t *at_state)
 {
 	struct cardstate *cs = at_state->cs;
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index f33ac27de643..6a8e1384e7bd 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -616,6 +616,15 @@ void gigaset_if_free(struct cardstate *cs)
 	tty_unregister_device(drv->tty, cs->minor_index);
 }
 
+/**
+ * gigaset_if_receive() - pass a received block of data to the tty device
+ * @cs:		device descriptor structure.
+ * @buffer:	received data.
+ * @len:	number of bytes received.
+ *
+ * Called by asyncdata/isocdata if a block of data received from the
+ * device must be sent to userspace through the ttyG* device.
+ */
 void gigaset_if_receive(struct cardstate *cs,
 			unsigned char *buffer, size_t len)
 {
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index bed38fcc432b..9f3ef7b4248c 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -429,7 +429,7 @@ static inline int hdlc_buildframe(struct isowbuf_t *iwb,
 		return -EAGAIN;
 	}
 
-	dump_bytes(DEBUG_STREAM, "snd data", in, count);
+	dump_bytes(DEBUG_STREAM_DUMP, "snd data", in, count);
 
 	/* bitstuff and checksum input data */
 	fcs = PPP_INITFCS;
@@ -448,7 +448,6 @@ static inline int hdlc_buildframe(struct isowbuf_t *iwb,
 	/* put closing flag and repeat byte for flag idle */
 	isowbuf_putflag(iwb);
 	end = isowbuf_donewrite(iwb);
-	dump_bytes(DEBUG_STREAM_DUMP, "isowbuf", iwb->data, end + 1);
 	return end;
 }
 
@@ -482,6 +481,8 @@ static inline int trans_buildframe(struct isowbuf_t *iwb,
 	}
 
 	gig_dbg(DEBUG_STREAM, "put %d bytes", count);
+	dump_bytes(DEBUG_STREAM_DUMP, "snd data", in, count);
+
 	write = iwb->write;
 	do {
 		c = bitrev8(*in++);
@@ -583,7 +584,7 @@ static inline void hdlc_done(struct bc_state *bcs)
 		procskb->tail -= 2;
 		gig_dbg(DEBUG_ISO, "%s: good frame (%d octets)",
 			__func__, procskb->len);
-		dump_bytes(DEBUG_STREAM,
+		dump_bytes(DEBUG_STREAM_DUMP,
 			   "rcv data", procskb->data, procskb->len);
 		bcs->hw.bas->goodbytes += procskb->len;
 		gigaset_rcv_skb(procskb, bcs->cs, bcs);
@@ -878,6 +879,8 @@ static inline void trans_receive(unsigned char *src, unsigned count,
 			dobytes--;
 		}
 		if (dobytes == 0) {
+			dump_bytes(DEBUG_STREAM_DUMP,
+				   "rcv data", skb->data, skb->len);
 			gigaset_rcv_skb(skb, bcs->cs, bcs);
 			bcs->skb = skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN);
 			if (!skb) {
@@ -973,16 +976,17 @@ void gigaset_isoc_input(struct inbuf_t *inbuf)
 
 /* == data output ========================================================== */
 
-/* gigaset_send_skb
- * called by common.c to queue an skb for sending
- * and start transmission if necessary
- * parameters:
- *	B Channel control structure
- *	skb
- * return value:
- *	number of bytes accepted for sending
- *	(skb->len if ok, 0 if out of buffer space)
- *	or error code (< 0, eg. -EINVAL)
+/**
+ * gigaset_isoc_send_skb() - queue an skb for sending
+ * @bcs:	B channel descriptor structure.
+ * @skb:	data to send.
+ *
+ * Called by i4l.c to queue an skb for sending, and start transmission if
+ * necessary.
+ *
+ * Return value:
+ *	number of bytes accepted for sending (skb->len) if ok,
+ *	error code < 0 (eg. -ENODEV) on error
  */
 int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb)
 {
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index bde55d7287fa..eadc1cd34a20 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -78,6 +78,7 @@ config MISDN_NETJET
 	depends on PCI
 	select MISDN_IPAC
 	select ISDN_HDLC
+	select ISDN_I4L
 	help
 	  Enable support for Traverse Technologies NETJet PCI cards.
 
diff --git a/drivers/isdn/hisax/arcofi.c b/drivers/isdn/hisax/arcofi.c
index d30ce5b978c2..85a8fd8dd0b7 100644
--- a/drivers/isdn/hisax/arcofi.c
+++ b/drivers/isdn/hisax/arcofi.c
@@ -10,6 +10,7 @@
  *
  */
  
+#include <linux/sched.h>
 #include "hisax.h"
 #include "isdnl1.h"
 #include "isac.h"
diff --git a/drivers/isdn/hisax/hfc_2bds0.c b/drivers/isdn/hisax/hfc_2bds0.c
index 5c46a7130e06..8d22f50760eb 100644
--- a/drivers/isdn/hisax/hfc_2bds0.c
+++ b/drivers/isdn/hisax/hfc_2bds0.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/sched.h>
 #include "hisax.h"
 #include "hfc_2bds0.h"
 #include "isdnl1.h"
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index d110a77940a4..10914731b304 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -20,6 +20,7 @@
 #include "hfc_pci.h"
 #include "isdnl1.h"
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/interrupt.h>
 
 static const char *hfcpci_revision = "$Revision: 1.48.2.4 $";
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
index 8f9f4912de32..90b35e1a4b7e 100644
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ b/drivers/isdn/hysdn/hysdn_procconf.c
@@ -11,6 +11,7 @@
  *
  */
 
+#include <linux/cred.h>
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/proc_fs.h>
diff --git a/drivers/isdn/hysdn/hysdn_proclog.c b/drivers/isdn/hysdn/hysdn_proclog.c
index 8991d2c8ee4a..8bcae28c4409 100644
--- a/drivers/isdn/hysdn/hysdn_proclog.c
+++ b/drivers/isdn/hysdn/hysdn_proclog.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/proc_fs.h>
+#include <linux/sched.h>
 #include <linux/smp_lock.h>
 
 #include "hysdn_defs.h"
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig
index dd744ffd240b..07c4e49f9e77 100644
--- a/drivers/isdn/i4l/Kconfig
+++ b/drivers/isdn/i4l/Kconfig
@@ -141,8 +141,7 @@ endmenu
 endif
 
 config ISDN_HDLC
-	tristate 
-	depends on HISAX_ST5481
+	tristate
 	select CRC_CCITT
 	select BITREVERSE
 
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index c36f52137456..feb0fa45b664 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -415,7 +415,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 }
 
 static int data_sock_setsockopt(struct socket *sock, int level, int optname,
-	char __user *optval, int len)
+	char __user *optval, unsigned int len)
 {
 	struct sock *sk = sock->sk;
 	int err = 0, opt = 0;
diff --git a/drivers/isdn/pcbit/drv.c b/drivers/isdn/pcbit/drv.c
index 8c66bcb953a1..123c1d6c43b4 100644
--- a/drivers/isdn/pcbit/drv.c
+++ b/drivers/isdn/pcbit/drv.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 
 #include <linux/types.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/drivers/isdn/pcbit/layer2.c b/drivers/isdn/pcbit/layer2.c
index e075e8d2fce0..30f0f45e3139 100644
--- a/drivers/isdn/pcbit/layer2.c
+++ b/drivers/isdn/pcbit/layer2.c
@@ -27,6 +27,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
diff --git a/drivers/isdn/sc/init.c b/drivers/isdn/sc/init.c
index dd0acd06750b..5a0774880d56 100644
--- a/drivers/isdn/sc/init.c
+++ b/drivers/isdn/sc/init.c
@@ -8,6 +8,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include "includes.h"
 #include "hardware.h"
 #include "card.h"
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 708a8017c21d..adc561eb59d2 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -19,9 +19,6 @@
 #include <linux/workqueue.h>
 #include <linux/leds-pca9532.h>
 
-static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END};
-I2C_CLIENT_INSMOD_1(pca9532);
-
 #define PCA9532_REG_PSC(i) (0x2+(i)*2)
 #define PCA9532_REG_PWM(i) (0x3+(i)*2)
 #define PCA9532_REG_LS0  0x6
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 18648180db02..daaf86631647 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -16,6 +16,7 @@
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/sched.h>
 #include "lg.h"
 
 /* Allow Guests to use a non-128 (ie. non-Linux) syscall trap. */
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index b4d3f7ca554f..bd1632388e4a 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -508,7 +508,7 @@ static int close(struct inode *inode, struct file *file)
  * uses: reading and writing a character device called /dev/lguest.  All the
  * work happens in the read(), write() and close() routines:
  */
-static struct file_operations lguest_fops = {
+static const struct file_operations lguest_fops = {
 	.owner	 = THIS_MODULE,
 	.release = close,
 	.write	 = write,
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index fde377c60cca..556f0feaa4df 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -124,6 +124,8 @@ read_reg(struct thermostat* th, int reg)
 	return data;
 }
 
+static struct i2c_driver thermostat_driver;
+
 static int
 attach_thermostat(struct i2c_adapter *adapter)
 {
@@ -148,7 +150,7 @@ attach_thermostat(struct i2c_adapter *adapter)
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&client->detected, &client->driver->clients);
+	list_add_tail(&client->detected, &thermostat_driver.clients);
 	return 0;
 }
 
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index a028598af2d3..ea32c7e5a9af 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -286,6 +286,8 @@ struct fcu_fan_table	fcu_fans[] = {
 	},
 };
 
+static struct i2c_driver therm_pm72_driver;
+
 /*
  * Utility function to create an i2c_client structure and
  * attach it to one of u3 adapters
@@ -318,7 +320,7 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&clt->detected, &clt->driver->clients);
+	list_add_tail(&clt->detected, &therm_pm72_driver.clients);
 	return clt;
 }
 
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index b40fb9b6c862..6f308a4757ee 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -405,7 +405,11 @@ static int __init via_pmu_start(void)
 		printk(KERN_ERR "via-pmu: can't map interrupt\n");
 		return -ENODEV;
 	}
-	if (request_irq(irq, via_pmu_interrupt, 0, "VIA-PMU", (void *)0)) {
+	/* We set IRQF_TIMER because we don't want the interrupt to be disabled
+	 * between the 2 passes of driver suspend, we control our own disabling
+	 * for that one
+	 */
+	if (request_irq(irq, via_pmu_interrupt, IRQF_TIMER, "VIA-PMU", (void *)0)) {
 		printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
 		return -ENODEV;
 	}
@@ -419,7 +423,7 @@ static int __init via_pmu_start(void)
 			gpio_irq = irq_of_parse_and_map(gpio_node, 0);
 
 		if (gpio_irq != NO_IRQ) {
-			if (request_irq(gpio_irq, gpio1_interrupt, 0,
+			if (request_irq(gpio_irq, gpio1_interrupt, IRQF_TIMER,
 					"GPIO1 ADB", (void *)0))
 				printk(KERN_ERR "pmu: can't get irq %d"
 				       " (GPIO1)\n", gpio_irq);
@@ -925,8 +929,7 @@ proc_write_options(struct file *file, const char __user *buffer,
 
 #ifdef CONFIG_ADB
 /* Send an ADB command */
-static int
-pmu_send_request(struct adb_request *req, int sync)
+static int pmu_send_request(struct adb_request *req, int sync)
 {
 	int i, ret;
 
@@ -1005,16 +1008,11 @@ pmu_send_request(struct adb_request *req, int sync)
 }
 
 /* Enable/disable autopolling */
-static int
-pmu_adb_autopoll(int devs)
+static int __pmu_adb_autopoll(int devs)
 {
 	struct adb_request req;
 
-	if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
-		return -ENXIO;
-
 	if (devs) {
-		adb_dev_map = devs;
 		pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
 			    adb_dev_map >> 8, adb_dev_map);
 		pmu_adb_flags = 2;
@@ -1027,9 +1025,17 @@ pmu_adb_autopoll(int devs)
 	return 0;
 }
 
+static int pmu_adb_autopoll(int devs)
+{
+	if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
+		return -ENXIO;
+
+	adb_dev_map = devs;
+	return __pmu_adb_autopoll(devs);
+}
+
 /* Reset the ADB bus */
-static int
-pmu_adb_reset_bus(void)
+static int pmu_adb_reset_bus(void)
 {
 	struct adb_request req;
 	int save_autopoll = adb_dev_map;
@@ -1038,13 +1044,13 @@ pmu_adb_reset_bus(void)
 		return -ENXIO;
 
 	/* anyone got a better idea?? */
-	pmu_adb_autopoll(0);
+	__pmu_adb_autopoll(0);
 
-	req.nbytes = 5;
+	req.nbytes = 4;
 	req.done = NULL;
 	req.data[0] = PMU_ADB_CMD;
-	req.data[1] = 0;
-	req.data[2] = ADB_BUSRESET;
+	req.data[1] = ADB_BUSRESET;
+	req.data[2] = 0;
 	req.data[3] = 0;
 	req.data[4] = 0;
 	req.reply_len = 0;
@@ -1056,7 +1062,7 @@ pmu_adb_reset_bus(void)
 	pmu_wait_complete(&req);
 
 	if (save_autopoll != 0)
-		pmu_adb_autopoll(save_autopoll);
+		__pmu_adb_autopoll(save_autopoll);
 
 	return 0;
 }
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 529886c7a826..ed6426a10773 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -115,6 +115,8 @@ static int wf_lm75_probe(struct i2c_client *client,
 	return rc;
 }
 
+static struct i2c_driver wf_lm75_driver;
+
 static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
 					     u8 addr, int ds1775,
 					     const char *loc)
@@ -157,7 +159,7 @@ static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&client->detected, &client->driver->clients);
+	list_add_tail(&client->detected, &wf_lm75_driver.clients);
 	return client;
  fail:
 	return NULL;
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index e2a55ecda2b2..a67b349319e9 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -88,6 +88,8 @@ static int wf_max6690_probe(struct i2c_client *client,
 	return rc;
 }
 
+static struct i2c_driver wf_max6690_driver;
+
 static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
 					    u8 addr, const char *loc)
 {
@@ -119,7 +121,7 @@ static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&client->detected, &client->driver->clients);
+	list_add_tail(&client->detected, &wf_max6690_driver.clients);
 	return client;
 
  fail:
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 5da729e58f99..e20330a28959 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -194,6 +194,8 @@ static struct wf_sensor_ops wf_sat_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static struct i2c_driver wf_sat_driver;
+
 static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
 {
 	struct i2c_board_info info;
@@ -222,7 +224,7 @@ static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&client->detected, &client->driver->clients);
+	list_add_tail(&client->detected, &wf_sat_driver.clients);
 }
 
 static int wf_sat_probe(struct i2c_client *client,
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index 556acff3952f..7dbe652efb5a 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -138,16 +138,6 @@ int dm_exception_store_type_unregister(struct dm_exception_store_type *type)
 }
 EXPORT_SYMBOL(dm_exception_store_type_unregister);
 
-/*
- * Round a number up to the nearest 'size' boundary.  size must
- * be a power of 2.
- */
-static ulong round_up(ulong n, ulong size)
-{
-	size--;
-	return (n + size) & ~size;
-}
-
 static int set_chunk_size(struct dm_exception_store *store,
 			  const char *chunk_size_arg, char **error)
 {
@@ -155,7 +145,8 @@ static int set_chunk_size(struct dm_exception_store *store,
 	char *value;
 
 	chunk_size_ulong = simple_strtoul(chunk_size_arg, &value, 10);
-	if (*chunk_size_arg == '\0' || *value != '\0') {
+	if (*chunk_size_arg == '\0' || *value != '\0' ||
+	    chunk_size_ulong > UINT_MAX) {
 		*error = "Invalid chunk size";
 		return -EINVAL;
 	}
@@ -165,40 +156,35 @@ static int set_chunk_size(struct dm_exception_store *store,
 		return 0;
 	}
 
-	/*
-	 * Chunk size must be multiple of page size.  Silently
-	 * round up if it's not.
-	 */
-	chunk_size_ulong = round_up(chunk_size_ulong, PAGE_SIZE >> 9);
-
-	return dm_exception_store_set_chunk_size(store, chunk_size_ulong,
+	return dm_exception_store_set_chunk_size(store,
+						 (unsigned) chunk_size_ulong,
 						 error);
 }
 
 int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
-				      unsigned long chunk_size_ulong,
+				      unsigned chunk_size,
 				      char **error)
 {
 	/* Check chunk_size is a power of 2 */
-	if (!is_power_of_2(chunk_size_ulong)) {
+	if (!is_power_of_2(chunk_size)) {
 		*error = "Chunk size is not a power of 2";
 		return -EINVAL;
 	}
 
 	/* Validate the chunk size against the device block size */
-	if (chunk_size_ulong % (bdev_logical_block_size(store->cow->bdev) >> 9)) {
+	if (chunk_size % (bdev_logical_block_size(store->cow->bdev) >> 9)) {
 		*error = "Chunk size is not a multiple of device blocksize";
 		return -EINVAL;
 	}
 
-	if (chunk_size_ulong > INT_MAX >> SECTOR_SHIFT) {
+	if (chunk_size > INT_MAX >> SECTOR_SHIFT) {
 		*error = "Chunk size is too high";
 		return -EINVAL;
 	}
 
-	store->chunk_size = chunk_size_ulong;
-	store->chunk_mask = chunk_size_ulong - 1;
-	store->chunk_shift = ffs(chunk_size_ulong) - 1;
+	store->chunk_size = chunk_size;
+	store->chunk_mask = chunk_size - 1;
+	store->chunk_shift = ffs(chunk_size) - 1;
 
 	return 0;
 }
@@ -251,7 +237,7 @@ int dm_exception_store_create(struct dm_target *ti, int argc, char **argv,
 
 	r = set_chunk_size(tmp_store, argv[2], &ti->error);
 	if (r)
-		goto bad_cow;
+		goto bad_ctr;
 
 	r = type->ctr(tmp_store, 0, NULL);
 	if (r) {
diff --git a/drivers/md/dm-exception-store.h b/drivers/md/dm-exception-store.h
index 812c71872ba0..8a223a48802c 100644
--- a/drivers/md/dm-exception-store.h
+++ b/drivers/md/dm-exception-store.h
@@ -101,9 +101,9 @@ struct dm_exception_store {
 	struct dm_dev *cow;
 
 	/* Size of data blocks saved - must be a power of 2 */
-	chunk_t chunk_size;
-	chunk_t chunk_mask;
-	chunk_t chunk_shift;
+	unsigned chunk_size;
+	unsigned chunk_mask;
+	unsigned chunk_shift;
 
 	void *context;
 };
@@ -169,7 +169,7 @@ int dm_exception_store_type_register(struct dm_exception_store_type *type);
 int dm_exception_store_type_unregister(struct dm_exception_store_type *type);
 
 int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
-				      unsigned long chunk_size_ulong,
+				      unsigned chunk_size,
 				      char **error);
 
 int dm_exception_store_create(struct dm_target *ti, int argc, char **argv,
diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c
index 652bd33109e3..7ac2c1450d10 100644
--- a/drivers/md/dm-log-userspace-base.c
+++ b/drivers/md/dm-log-userspace-base.c
@@ -156,7 +156,7 @@ static int userspace_ctr(struct dm_dirty_log *log, struct dm_target *ti,
 	}
 
 	/* The ptr value is sufficient for local unique id */
-	lc->luid = (uint64_t)lc;
+	lc->luid = (unsigned long)lc;
 
 	lc->ti = ti;
 
diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c
index ba0edad2d048..54abf9e303b7 100644
--- a/drivers/md/dm-log-userspace-transfer.c
+++ b/drivers/md/dm-log-userspace-transfer.c
@@ -129,11 +129,13 @@ static int fill_pkg(struct cn_msg *msg, struct dm_ulog_request *tfr)
  * This is the connector callback that delivers data
  * that was sent from userspace.
  */
-static void cn_ulog_callback(void *data)
+static void cn_ulog_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
-	struct cn_msg *msg = (struct cn_msg *)data;
 	struct dm_ulog_request *tfr = (struct dm_ulog_request *)(msg + 1);
 
+	if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN))
+		return;
+
 	spin_lock(&receiving_list_lock);
 	if (msg->len == 0)
 		fill_pkg(msg, NULL);
diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c
index d5b2e08750d5..0c746420c008 100644
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -284,12 +284,13 @@ static int read_header(struct pstore *ps, int *new_snapshot)
 {
 	int r;
 	struct disk_header *dh;
-	chunk_t chunk_size;
+	unsigned chunk_size;
 	int chunk_size_supplied = 1;
 	char *chunk_err;
 
 	/*
-	 * Use default chunk size (or hardsect_size, if larger) if none supplied
+	 * Use default chunk size (or logical_block_size, if larger)
+	 * if none supplied
 	 */
 	if (!ps->store->chunk_size) {
 		ps->store->chunk_size = max(DM_CHUNK_SIZE_DEFAULT_SECTORS,
@@ -334,10 +335,9 @@ static int read_header(struct pstore *ps, int *new_snapshot)
 		return 0;
 
 	if (chunk_size_supplied)
-		DMWARN("chunk size %llu in device metadata overrides "
-		       "table chunk size of %llu.",
-		       (unsigned long long)chunk_size,
-		       (unsigned long long)ps->store->chunk_size);
+		DMWARN("chunk size %u in device metadata overrides "
+		       "table chunk size of %u.",
+		       chunk_size, ps->store->chunk_size);
 
 	/* We had a bogus chunk_size. Fix stuff up. */
 	free_area(ps);
@@ -345,8 +345,8 @@ static int read_header(struct pstore *ps, int *new_snapshot)
 	r = dm_exception_store_set_chunk_size(ps->store, chunk_size,
 					      &chunk_err);
 	if (r) {
-		DMERR("invalid on-disk chunk size %llu: %s.",
-		      (unsigned long long)chunk_size, chunk_err);
+		DMERR("invalid on-disk chunk size %u: %s.",
+		      chunk_size, chunk_err);
 		return r;
 	}
 
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index 57f1bf7f3b7a..3a3ba46e6d4b 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -296,6 +296,7 @@ static void __insert_origin(struct origin *o)
  */
 static int register_snapshot(struct dm_snapshot *snap)
 {
+	struct dm_snapshot *l;
 	struct origin *o, *new_o;
 	struct block_device *bdev = snap->origin->bdev;
 
@@ -319,7 +320,11 @@ static int register_snapshot(struct dm_snapshot *snap)
 		__insert_origin(o);
 	}
 
-	list_add_tail(&snap->list, &o->snapshots);
+	/* Sort the list according to chunk size, largest-first smallest-last */
+	list_for_each_entry(l, &o->snapshots, list)
+		if (l->store->chunk_size < snap->store->chunk_size)
+			break;
+	list_add_tail(&snap->list, &l->list);
 
 	up_write(&_origins_lock);
 	return 0;
@@ -668,6 +673,11 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	bio_list_init(&s->queued_bios);
 	INIT_WORK(&s->queued_bios_work, flush_queued_bios);
 
+	if (!s->store->chunk_size) {
+		ti->error = "Chunk size not set";
+		goto bad_load_and_register;
+	}
+
 	/* Add snapshot to the list of snapshots for this origin */
 	/* Exceptions aren't triggered till snapshot_resume() is called */
 	if (register_snapshot(s)) {
@@ -951,7 +961,7 @@ static void start_copy(struct dm_snap_pending_exception *pe)
 
 	src.bdev = bdev;
 	src.sector = chunk_to_sector(s->store, pe->e.old_chunk);
-	src.count = min(s->store->chunk_size, dev_size - src.sector);
+	src.count = min((sector_t)s->store->chunk_size, dev_size - src.sector);
 
 	dest.bdev = s->store->cow->bdev;
 	dest.sector = chunk_to_sector(s->store, pe->e.new_chunk);
@@ -1142,6 +1152,8 @@ static int snapshot_status(struct dm_target *ti, status_type_t type,
 	unsigned sz = 0;
 	struct dm_snapshot *snap = ti->private;
 
+	down_write(&snap->lock);
+
 	switch (type) {
 	case STATUSTYPE_INFO:
 		if (!snap->valid)
@@ -1173,6 +1185,8 @@ static int snapshot_status(struct dm_target *ti, status_type_t type,
 		break;
 	}
 
+	up_write(&snap->lock);
+
 	return 0;
 }
 
@@ -1388,7 +1402,7 @@ static void origin_resume(struct dm_target *ti)
 	struct dm_dev *dev = ti->private;
 	struct dm_snapshot *snap;
 	struct origin *o;
-	chunk_t chunk_size = 0;
+	unsigned chunk_size = 0;
 
 	down_read(&_origins_lock);
 	o = __lookup_origin(dev->bdev);
@@ -1465,7 +1479,7 @@ static int __init dm_snapshot_init(void)
 	r = dm_register_target(&snapshot_target);
 	if (r) {
 		DMERR("snapshot target register failed %d", r);
-		return r;
+		goto bad_register_snapshot_target;
 	}
 
 	r = dm_register_target(&origin_target);
@@ -1522,6 +1536,9 @@ bad2:
 	dm_unregister_target(&origin_target);
 bad1:
 	dm_unregister_target(&snapshot_target);
+
+bad_register_snapshot_target:
+	dm_exception_store_exit();
 	return r;
 }
 
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 376f1ab48a24..724efc63904d 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -47,6 +47,7 @@ struct dm_io {
 	atomic_t io_count;
 	struct bio *bio;
 	unsigned long start_time;
+	spinlock_t endio_lock;
 };
 
 /*
@@ -578,8 +579,12 @@ static void dec_pending(struct dm_io *io, int error)
 	struct mapped_device *md = io->md;
 
 	/* Push-back supersedes any I/O errors */
-	if (error && !(io->error > 0 && __noflush_suspending(md)))
-		io->error = error;
+	if (unlikely(error)) {
+		spin_lock_irqsave(&io->endio_lock, flags);
+		if (!(io->error > 0 && __noflush_suspending(md)))
+			io->error = error;
+		spin_unlock_irqrestore(&io->endio_lock, flags);
+	}
 
 	if (atomic_dec_and_test(&io->io_count)) {
 		if (io->error == DM_ENDIO_REQUEUE) {
@@ -1226,6 +1231,7 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio)
 	atomic_set(&ci.io->io_count, 1);
 	ci.io->bio = bio;
 	ci.io->md = md;
+	spin_lock_init(&ci.io->endio_lock);
 	ci.sector = bio->bi_sector;
 	ci.sector_count = bio_sectors(bio);
 	if (unlikely(bio_empty_barrier(bio)))
@@ -1822,6 +1828,7 @@ static struct mapped_device *alloc_dev(int minor)
 bad_bdev:
 	destroy_workqueue(md->wq);
 bad_thread:
+	del_gendisk(md->disk);
 	put_disk(md->disk);
 bad_disk:
 	blk_cleanup_queue(md->queue);
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 3750ff48cba1..c37790ad92d0 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -20,6 +20,7 @@
  *
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
@@ -1203,7 +1204,7 @@ static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait)
 	return mask;
 }
 
-static struct file_operations dvb_dvr_fops = {
+static const struct file_operations dvb_dvr_fops = {
 	.owner = THIS_MODULE,
 	.read = dvb_dvr_read,
 	.write = dvb_dvr_write,
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index eef6d3616626..91c537bca8ad 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -21,6 +21,7 @@
  *
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 8c9ae0a3a272..0241a7c5c34a 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -63,6 +63,7 @@
 #include <asm/uaccess.h>
 #include <linux/crc32.h>
 #include <linux/mutex.h>
+#include <linux/sched.h>
 
 #include "dvb_demux.h"
 #include "dvb_net.h"
diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c
index eeb80d0ea3ff..853e04b7cb36 100644
--- a/drivers/media/dvb/firewire/firedtv-ci.c
+++ b/drivers/media/dvb/firewire/firedtv-ci.c
@@ -215,7 +215,7 @@ static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait)
 	return POLLIN;
 }
 
-static struct file_operations fdtv_ca_fops = {
+static const struct file_operations fdtv_ca_fops = {
 	.owner		= THIS_MODULE,
 	.ioctl		= dvb_generic_ioctl,
 	.open		= dvb_generic_open,
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index 8b1440136c45..482d0f3be5ff 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -38,6 +38,7 @@
 #include <linux/videodev2.h>	/* V4L2 API defs		*/
 #include <linux/param.h>
 #include <linux/pnp.h>
+#include <linux/sched.h>
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 43ab0adf3b61..2377313c041a 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -31,6 +31,7 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/vmalloc.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <linux/ctype.h>
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 4b1bc05a462c..01e1eefcf1eb 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -28,6 +28,7 @@
  */
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
index f1ccf98c0a6f..8e93c6f25c83 100644
--- a/drivers/media/video/videobuf-core.c
+++ b/drivers/media/video/videobuf-core.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index 53cdd67cebe1..032ebae0134a 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index bc2ec2182c00..34f3f36f819b 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -56,6 +56,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/fs.h>
+#include <linux/sched.h>
 
 #define my_VERSION	MPT_LINUX_VERSION_COMMON
 #define MYNAM		"mptlan"
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 5447da16a170..613481028272 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -57,8 +57,6 @@
  * The AB3100 is usually assigned address 0x48 (7-bit)
  * The chip is defined in the platform i2c_board_data section.
  */
-static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD_1(ab3100);
 
 u8 ab3100_get_chip_type(struct ab3100 *ab3100)
 {
@@ -966,7 +964,7 @@ static int __exit ab3100_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id ab3100_id[] = {
-	{ "ab3100", ab3100 },
+	{ "ab3100", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ab3100_id);
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index e424cf6d8e9e..a1c47ee95c0e 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -480,7 +480,6 @@ static int
 add_children(struct twl4030_platform_data *pdata, unsigned long features)
 {
 	struct device	*child;
-	struct device	*usb_transceiver = NULL;
 
 	if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
 		child = add_child(3, "twl4030_bci",
@@ -532,16 +531,61 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 	}
 
 	if (twl_has_usb() && pdata->usb) {
+
+		static struct regulator_consumer_supply usb1v5 = {
+			.supply =	"usb1v5",
+		};
+		static struct regulator_consumer_supply usb1v8 = {
+			.supply =	"usb1v8",
+		};
+		static struct regulator_consumer_supply usb3v1 = {
+			.supply =	"usb3v1",
+		};
+
+	/* First add the regulators so that they can be used by transceiver */
+		if (twl_has_regulator()) {
+			/* this is a template that gets copied */
+			struct regulator_init_data usb_fixed = {
+				.constraints.valid_modes_mask =
+					REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+				.constraints.valid_ops_mask =
+					REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+			};
+
+			child = add_regulator_linked(TWL4030_REG_VUSB1V5,
+						      &usb_fixed, &usb1v5, 1);
+			if (IS_ERR(child))
+				return PTR_ERR(child);
+
+			child = add_regulator_linked(TWL4030_REG_VUSB1V8,
+						      &usb_fixed, &usb1v8, 1);
+			if (IS_ERR(child))
+				return PTR_ERR(child);
+
+			child = add_regulator_linked(TWL4030_REG_VUSB3V1,
+						      &usb_fixed, &usb3v1, 1);
+			if (IS_ERR(child))
+				return PTR_ERR(child);
+
+		}
+
 		child = add_child(0, "twl4030_usb",
 				pdata->usb, sizeof(*pdata->usb),
 				true,
 				/* irq0 = USB_PRES, irq1 = USB */
 				pdata->irq_base + 8 + 2, pdata->irq_base + 4);
+
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 
 		/* we need to connect regulators to this transceiver */
-		usb_transceiver = child;
+		if (twl_has_regulator() && child) {
+			usb1v5.dev = child;
+			usb1v8.dev = child;
+			usb3v1.dev = child;
+		}
 	}
 
 	if (twl_has_watchdog()) {
@@ -580,47 +624,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			return PTR_ERR(child);
 	}
 
-	if (twl_has_regulator() && usb_transceiver) {
-		static struct regulator_consumer_supply usb1v5 = {
-			.supply =	"usb1v5",
-		};
-		static struct regulator_consumer_supply usb1v8 = {
-			.supply =	"usb1v8",
-		};
-		static struct regulator_consumer_supply usb3v1 = {
-			.supply =	"usb3v1",
-		};
-
-		/* this is a template that gets copied */
-		struct regulator_init_data usb_fixed = {
-			.constraints.valid_modes_mask =
-				  REGULATOR_MODE_NORMAL
-				| REGULATOR_MODE_STANDBY,
-			.constraints.valid_ops_mask =
-				  REGULATOR_CHANGE_MODE
-				| REGULATOR_CHANGE_STATUS,
-		};
-
-		usb1v5.dev = usb_transceiver;
-		usb1v8.dev = usb_transceiver;
-		usb3v1.dev = usb_transceiver;
-
-		child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed,
-				&usb1v5, 1);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed,
-				&usb1v8, 1);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed,
-				&usb3v1, 1);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-	}
-
 	/* maybe add LDOs that are omitted on cost-reduced parts */
 	if (twl_has_regulator() && !(features & TPS_SUBSET)) {
 		child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
@@ -792,7 +795,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 			twl->client = i2c_new_dummy(client->adapter,
 					twl->address);
 			if (!twl->client) {
-				dev_err(&twl->client->dev,
+				dev_err(&client->dev,
 					"can't attach client %d\n", i);
 				status = -ENOMEM;
 				goto fail;
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index 2afc08006e6d..fa294b6d600a 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/ucb1400.h>
 
 unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index fea9085fe52c..60c3988f3cf3 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -18,6 +18,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/errno.h>
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index d3015dfb9134..ac056ea6b66e 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -507,6 +507,8 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 {
 	int i, ret;
 
+	mutex_init(&wm831x->irq_lock);
+
 	if (!irq) {
 		dev_warn(wm831x->dev,
 			 "No interrupt specified - functionality limited\n");
@@ -521,7 +523,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 	}
 
 	wm831x->irq = irq;
-	mutex_init(&wm831x->irq_lock);
 	INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
 
 	/* Mask the individual interrupt sources */
diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
index 3c0c58eed347..5a6b2bce8ad5 100644
--- a/drivers/misc/eeprom/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -33,12 +33,6 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
 
-/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(max6875);
-
 /* The MAX6875 can only read/write 16 bytes at a time */
 #define SLICE_SIZE			16
 #define SLICE_BITS			4
@@ -146,31 +140,21 @@ static struct bin_attribute user_eeprom_attr = {
 	.read = max6875_read,
 };
 
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int max6875_detect(struct i2c_client *client, int kind,
-			  struct i2c_board_info *info)
+static int max6875_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	struct max6875_data *data;
+	int err;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
 				     | I2C_FUNC_SMBUS_READ_BYTE))
 		return -ENODEV;
 
-	/* Only check even addresses */
+	/* Only bind to even addresses */
 	if (client->addr & 1)
 		return -ENODEV;
 
-	strlcpy(info->type, "max6875", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int max6875_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct max6875_data *data;
-	int err;
-
 	if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
 		return -ENOMEM;
 
@@ -222,9 +206,6 @@ static struct i2c_driver max6875_driver = {
 	.probe		= max6875_probe,
 	.remove		= max6875_remove,
 	.id_table	= max6875_id,
-
-	.detect		= max6875_detect,
-	.address_data	= &addr_data,
 };
 
 static int __init max6875_init(void)
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 1ad27c6abcca..a92a3a742b43 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -18,6 +18,7 @@
 #include <linux/device.h>
 #include <linux/file.h>
 #include <linux/cdev.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/delay.h>
 #include <linux/uaccess.h>
diff --git a/drivers/misc/ibmasm/command.c b/drivers/misc/ibmasm/command.c
index 276d3fb68094..e2031739aa29 100644
--- a/drivers/misc/ibmasm/command.c
+++ b/drivers/misc/ibmasm/command.c
@@ -22,6 +22,7 @@
  *
  */
 
+#include <linux/sched.h>
 #include "ibmasm.h"
 #include "lowlevel.h"
 
diff --git a/drivers/misc/ibmasm/event.c b/drivers/misc/ibmasm/event.c
index 68a0a5b94795..572d41ffc186 100644
--- a/drivers/misc/ibmasm/event.c
+++ b/drivers/misc/ibmasm/event.c
@@ -22,6 +22,7 @@
  *
  */
 
+#include <linux/sched.h>
 #include "ibmasm.h"
 #include "lowlevel.h"
 
diff --git a/drivers/misc/ibmasm/r_heartbeat.c b/drivers/misc/ibmasm/r_heartbeat.c
index bec9e2c44bef..2de487ac788c 100644
--- a/drivers/misc/ibmasm/r_heartbeat.c
+++ b/drivers/misc/ibmasm/r_heartbeat.c
@@ -20,6 +20,7 @@
  *
  */
 
+#include <linux/sched.h>
 #include "ibmasm.h"
 #include "dot_command.h"
 
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index fa57b67593ae..04c27266f567 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/cdev.h>
 #include <linux/phantom.h>
+#include <linux/sched.h>
 #include <linux/smp_lock.h>
 
 #include <asm/atomic.h>
@@ -271,7 +272,7 @@ static unsigned int phantom_poll(struct file *file, poll_table *wait)
 	return mask;
 }
 
-static struct file_operations phantom_file_ops = {
+static const struct file_operations phantom_file_ops = {
 	.open = phantom_open,
 	.release = phantom_release,
 	.unlocked_ioctl = phantom_ioctl,
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 300e7ba391a0..41c8fe2a928c 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -53,7 +53,6 @@ struct gru_stats_s gru_stats;
 /* Guaranteed user available resources on each node */
 static int max_user_cbrs, max_user_dsr_bytes;
 
-static struct file_operations gru_fops;
 static struct miscdevice gru_miscdev;
 
 
@@ -426,7 +425,7 @@ static void __exit gru_exit(void)
 	gru_proc_exit();
 }
 
-static struct file_operations gru_fops = {
+static const struct file_operations gru_fops = {
 	.owner		= THIS_MODULE,
 	.unlocked_ioctl	= gru_file_unlocked_ioctl,
 	.mmap		= gru_file_mmap,
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 610dbd1fcc82..96d10f40fb23 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -240,7 +240,7 @@ static int mmc_ext_csd_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct file_operations mmc_dbg_ext_csd_fops = {
+static const struct file_operations mmc_dbg_ext_csd_fops = {
 	.open		= mmc_ext_csd_open,
 	.read		= mmc_ext_csd_read,
 	.release	= mmc_ext_csd_release,
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index 6636354b48ce..f85dcd536508 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -29,6 +29,8 @@ static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func,
 	unsigned i, nr_strings;
 	char **buffer, *string;
 
+	/* Find all null-terminated (including zero length) strings in
+	   the TPLLV1_INFO field. Trailing garbage is ignored. */
 	buf += 2;
 	size -= 2;
 
@@ -39,11 +41,8 @@ static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func,
 		if (buf[i] == 0)
 			nr_strings++;
 	}
-
-	if (nr_strings < 4) {
-		printk(KERN_WARNING "SDIO: ignoring broken CISTPL_VERS_1\n");
+	if (nr_strings == 0)
 		return 0;
-	}
 
 	size = i;
 
@@ -98,6 +97,22 @@ static const unsigned char speed_val[16] =
 static const unsigned int speed_unit[8] =
 	{ 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 };
 
+/* FUNCE tuples with these types get passed to SDIO drivers */
+static const unsigned char funce_type_whitelist[] = {
+	4 /* CISTPL_FUNCE_LAN_NODE_ID used in Broadcom cards */
+};
+
+static int cistpl_funce_whitelisted(unsigned char type)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(funce_type_whitelist); i++) {
+		if (funce_type_whitelist[i] == type)
+			return 1;
+	}
+	return 0;
+}
+
 static int cistpl_funce_common(struct mmc_card *card,
 			       const unsigned char *buf, unsigned size)
 {
@@ -120,6 +135,10 @@ static int cistpl_funce_func(struct sdio_func *func,
 	unsigned vsn;
 	unsigned min_size;
 
+	/* let SDIO drivers take care of whitelisted FUNCE tuples */
+	if (cistpl_funce_whitelisted(buf[0]))
+		return -EILSEQ;
+
 	vsn = func->card->cccr.sdio_vsn;
 	min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42;
 
@@ -154,13 +173,12 @@ static int cistpl_funce(struct mmc_card *card, struct sdio_func *func,
 	else
 		ret = cistpl_funce_common(card, buf, size);
 
-	if (ret) {
+	if (ret && ret != -EILSEQ) {
 		printk(KERN_ERR "%s: bad CISTPL_FUNCE size %u "
 		       "type %u\n", mmc_hostname(card->host), size, buf[0]);
-		return ret;
 	}
 
-	return 0;
+	return ret;
 }
 
 typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *,
@@ -253,21 +271,12 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
 		for (i = 0; i < ARRAY_SIZE(cis_tpl_list); i++)
 			if (cis_tpl_list[i].code == tpl_code)
 				break;
-		if (i >= ARRAY_SIZE(cis_tpl_list)) {
-			/* this tuple is unknown to the core */
-			this->next = NULL;
-			this->code = tpl_code;
-			this->size = tpl_link;
-			*prev = this;
-			prev = &this->next;
-			printk(KERN_DEBUG
-			       "%s: queuing CIS tuple 0x%02x length %u\n",
-			       mmc_hostname(card->host), tpl_code, tpl_link);
-		} else {
+		if (i < ARRAY_SIZE(cis_tpl_list)) {
 			const struct cis_tpl *tpl = cis_tpl_list + i;
 			if (tpl_link < tpl->min_size) {
 				printk(KERN_ERR
-				       "%s: bad CIS tuple 0x%02x (length = %u, expected >= %u)\n",
+				       "%s: bad CIS tuple 0x%02x"
+				       " (length = %u, expected >= %u)\n",
 				       mmc_hostname(card->host),
 				       tpl_code, tpl_link, tpl->min_size);
 				ret = -EINVAL;
@@ -275,7 +284,30 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
 				ret = tpl->parse(card, func,
 						 this->data, tpl_link);
 			}
-			kfree(this);
+			/*
+			 * We don't need the tuple anymore if it was
+			 * successfully parsed by the SDIO core or if it is
+			 * not going to be parsed by SDIO drivers.
+			 */
+			if (!ret || ret != -EILSEQ)
+				kfree(this);
+		} else {
+			/* unknown tuple */
+			ret = -EILSEQ;
+		}
+
+		if (ret == -EILSEQ) {
+			/* this tuple is unknown to the core or whitelisted */
+			this->next = NULL;
+			this->code = tpl_code;
+			this->size = tpl_link;
+			*prev = this;
+			prev = &this->next;
+			printk(KERN_DEBUG
+			       "%s: queuing CIS tuple 0x%02x length %u\n",
+			       mmc_hostname(card->host), tpl_code, tpl_link);
+			/* keep on analyzing tuples */
+			ret = 0;
 		}
 
 		ptr += tpl_link;
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 7cb057f3f883..432ae8358c86 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -276,6 +276,47 @@ config MMC_S3C
 
 	  If unsure, say N.
 
+config MMC_S3C_HW_SDIO_IRQ
+       bool "Hardware support for SDIO IRQ"
+       depends on MMC_S3C
+       help
+         Enable the hardware support for SDIO interrupts instead of using
+	 the generic polling code.
+
+choice
+	prompt "Samsung S3C SD/MMC transfer code"
+	depends on MMC_S3C
+
+config MMC_S3C_PIO
+	bool "Use PIO transfers only"
+	help
+	  Use PIO to transfer data between memory and the hardware.
+
+	  PIO is slower than DMA as it requires CPU instructions to
+	  move the data. This has been the traditional default for
+	  the S3C MCI driver.
+
+config MMC_S3C_DMA
+	bool "Use DMA transfers only (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  Use DMA to transfer data between memory and the hardare.
+
+	  Currently, the DMA support in this driver seems to not be
+	  working properly and needs to be debugged before this
+	  option is useful.
+
+config MMC_S3C_PIODMA
+	bool "Support for both PIO and DMA (EXPERIMENTAL)"
+	help
+	  Compile both the PIO and DMA transfer routines into the
+	  driver and let the platform select at run-time which one
+	  is best.
+
+	  See notes for the DMA option.
+
+endchoice
+
 config MMC_SDRICOH_CS
 	tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && PCI && PCMCIA
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index e556d42cc45a..63924e0c7ea9 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -72,7 +72,6 @@
 #include <asm/irq.h>
 #include <asm/gpio.h>
 
-#include <asm/mach/mmc.h>
 #include <mach/board.h>
 #include <mach/cpu.h>
 #include <mach/at91_mci.h>
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 3d1e5329da12..705a5894a6bb 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -678,7 +678,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	writel(0, host->base + MMCIMASK1);
 	writel(0xfff, host->base + MMCICLEAR);
 
-#ifdef CONFIG_GPIOLIB
 	if (gpio_is_valid(plat->gpio_cd)) {
 		ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
 		if (ret == 0)
@@ -697,7 +696,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		else if (ret != -ENOSYS)
 			goto err_gpio_wp;
 	}
-#endif
 
 	ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
 	if (ret)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4487cc097911..0aecaaebef3d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2013,7 +2013,7 @@ static struct platform_driver omap_hsmmc_driver = {
 static int __init omap_hsmmc_init(void)
 {
 	/* Register the MMC driver */
-	return platform_driver_register(&omap_hsmmc_driver);
+	return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe);
 }
 
 static void __exit omap_hsmmc_cleanup(void)
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 5e0b1529964d..b00d67319058 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -693,7 +693,7 @@ static int pxamci_probe(struct platform_device *pdev)
 	if (gpio_is_valid(gpio_ro)) {
 		ret = gpio_request(gpio_ro, "mmc card read only");
 		if (ret) {
-			dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power);
+			dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
 			goto err_gpio_ro;
 		}
 		gpio_direction_input(gpio_ro);
@@ -701,7 +701,7 @@ static int pxamci_probe(struct platform_device *pdev)
 	if (gpio_is_valid(gpio_cd)) {
 		ret = gpio_request(gpio_cd, "mmc card detect");
 		if (ret) {
-			dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power);
+			dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
 			goto err_gpio_cd;
 		}
 		gpio_direction_input(gpio_cd);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 8c08cd7efa7f..99b74a351020 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -17,6 +17,8 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
@@ -58,8 +60,6 @@ static const int dbgmap_debug = dbg_err | dbg_debug;
 		dev_dbg(&host->pdev->dev, args);  \
 	} while (0)
 
-#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
-
 static struct s3c2410_dma_client s3cmci_dma_client = {
 	.name		= "s3c-mci",
 };
@@ -164,6 +164,40 @@ static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
 
 #endif /* CONFIG_MMC_DEBUG */
 
+/**
+ * s3cmci_host_usedma - return whether the host is using dma or pio
+ * @host: The host state
+ *
+ * Return true if the host is using DMA to transfer data, else false
+ * to use PIO mode. Will return static data depending on the driver
+ * configuration.
+ */
+static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
+{
+#ifdef CONFIG_MMC_S3C_PIO
+	return false;
+#elif defined(CONFIG_MMC_S3C_DMA)
+	return true;
+#else
+	return host->dodma;
+#endif
+}
+
+/**
+ * s3cmci_host_canpio - return true if host has pio code available
+ *
+ * Return true if the driver has been compiled with the PIO support code
+ * available.
+ */
+static inline bool s3cmci_host_canpio(void)
+{
+#ifdef CONFIG_MMC_S3C_PIO
+	return true;
+#else
+	return false;
+#endif
+}
+
 static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
 {
 	u32 newmask;
@@ -190,7 +224,33 @@ static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
 
 static inline void clear_imask(struct s3cmci_host *host)
 {
-	writel(0, host->base + host->sdiimsk);
+	u32 mask = readl(host->base + host->sdiimsk);
+
+	/* preserve the SDIO IRQ mask state */
+	mask &= S3C2410_SDIIMSK_SDIOIRQ;
+	writel(mask, host->base + host->sdiimsk);
+}
+
+/**
+ * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
+ * @host: The host to check.
+ *
+ * Test to see if the SDIO interrupt is being signalled in case the
+ * controller has failed to re-detect a card interrupt. Read GPE8 and
+ * see if it is low and if so, signal a SDIO interrupt.
+ *
+ * This is currently called if a request is finished (we assume that the
+ * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
+ * already being indicated.
+*/
+static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
+{
+	if (host->sdio_irqen) {
+		if (gpio_get_value(S3C2410_GPE(8)) == 0) {
+			printk(KERN_DEBUG "%s: signalling irq\n", __func__);
+			mmc_signal_sdio_irq(host->mmc);
+		}
+	}
 }
 
 static inline int get_data_buffer(struct s3cmci_host *host,
@@ -238,6 +298,64 @@ static inline u32 fifo_free(struct s3cmci_host *host)
 	return 63 - fifostat;
 }
 
+/**
+ * s3cmci_enable_irq - enable IRQ, after having disabled it.
+ * @host: The device state.
+ * @more: True if more IRQs are expected from transfer.
+ *
+ * Enable the main IRQ if needed after it has been disabled.
+ *
+ * The IRQ can be one of the following states:
+ *	- disabled during IDLE
+ *	- disabled whilst processing data
+ *	- enabled during transfer
+ *	- enabled whilst awaiting SDIO interrupt detection
+ */
+static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
+{
+	unsigned long flags;
+	bool enable = false;
+
+	local_irq_save(flags);
+
+	host->irq_enabled = more;
+	host->irq_disabled = false;
+
+	enable = more | host->sdio_irqen;
+
+	if (host->irq_state != enable) {
+		host->irq_state = enable;
+
+		if (enable)
+			enable_irq(host->irq);
+		else
+			disable_irq(host->irq);
+	}
+
+	local_irq_restore(flags);
+}
+
+/**
+ *
+ */
+static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	//printk(KERN_DEBUG "%s: transfer %d\n", __func__, transfer);
+
+	host->irq_disabled = transfer;
+
+	if (transfer && host->irq_state) {
+		host->irq_state = false;
+		disable_irq(host->irq);
+	}
+
+	local_irq_restore(flags);
+}
+
 static void do_pio_read(struct s3cmci_host *host)
 {
 	int res;
@@ -374,8 +492,7 @@ static void pio_tasklet(unsigned long data)
 {
 	struct s3cmci_host *host = (struct s3cmci_host *) data;
 
-
-	disable_irq(host->irq);
+	s3cmci_disable_irq(host, true);
 
 	if (host->pio_active == XFER_WRITE)
 		do_pio_write(host);
@@ -395,9 +512,10 @@ static void pio_tasklet(unsigned long data)
 				host->mrq->data->error = -EINVAL;
 		}
 
+		s3cmci_enable_irq(host, false);
 		finalize_request(host);
 	} else
-		enable_irq(host->irq);
+		s3cmci_enable_irq(host, true);
 }
 
 /*
@@ -432,17 +550,27 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id)
 	struct s3cmci_host *host = dev_id;
 	struct mmc_command *cmd;
 	u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
-	u32 mci_cclear, mci_dclear;
+	u32 mci_cclear = 0, mci_dclear;
 	unsigned long iflags;
 
+	mci_dsta = readl(host->base + S3C2410_SDIDSTA);
+	mci_imsk = readl(host->base + host->sdiimsk);
+
+	if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
+		if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
+			mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
+			writel(mci_dclear, host->base + S3C2410_SDIDSTA);
+
+			mmc_signal_sdio_irq(host->mmc);
+			return IRQ_HANDLED;
+		}
+	}
+
 	spin_lock_irqsave(&host->complete_lock, iflags);
 
 	mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
-	mci_dsta = readl(host->base + S3C2410_SDIDSTA);
 	mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
 	mci_fsta = readl(host->base + S3C2410_SDIFSTA);
-	mci_imsk = readl(host->base + host->sdiimsk);
-	mci_cclear = 0;
 	mci_dclear = 0;
 
 	if ((host->complete_what == COMPLETION_NONE) ||
@@ -466,7 +594,7 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id)
 		goto irq_out;
 	}
 
-	if (!host->dodma) {
+	if (!s3cmci_host_usedma(host)) {
 		if ((host->pio_active == XFER_WRITE) &&
 		    (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
 
@@ -673,6 +801,7 @@ static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
 	dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
 		size, mci_dsta, mci_dcnt);
 
+	host->dma_complete = 1;
 	host->complete_what = COMPLETION_FINALIZE;
 
 out:
@@ -683,9 +812,9 @@ out:
 fail_request:
 	host->mrq->data->error = -EINVAL;
 	host->complete_what = COMPLETION_FINALIZE;
-	writel(0, host->base + host->sdiimsk);
-	goto out;
+	clear_imask(host);
 
+	goto out;
 }
 
 static void finalize_request(struct s3cmci_host *host)
@@ -702,8 +831,9 @@ static void finalize_request(struct s3cmci_host *host)
 
 	if (cmd->data && (cmd->error == 0) &&
 	    (cmd->data->error == 0)) {
-		if (host->dodma && (!host->dma_complete)) {
-			dbg(host, dbg_dma, "DMA Missing!\n");
+		if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
+			dbg(host, dbg_dma, "DMA Missing (%d)!\n",
+			    host->dma_complete);
 			return;
 		}
 	}
@@ -728,7 +858,7 @@ static void finalize_request(struct s3cmci_host *host)
 	writel(0, host->base + S3C2410_SDICMDARG);
 	writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
 	writel(0, host->base + S3C2410_SDICMDCON);
-	writel(0, host->base + host->sdiimsk);
+	clear_imask(host);
 
 	if (cmd->data && cmd->error)
 		cmd->data->error = cmd->error;
@@ -754,7 +884,7 @@ static void finalize_request(struct s3cmci_host *host)
 	/* If we had an error while transfering data we flush the
 	 * DMA channel and the fifo to clear out any garbage. */
 	if (mrq->data->error != 0) {
-		if (host->dodma)
+		if (s3cmci_host_usedma(host))
 			s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
 
 		if (host->is2440) {
@@ -776,6 +906,8 @@ static void finalize_request(struct s3cmci_host *host)
 request_done:
 	host->complete_what = COMPLETION_NONE;
 	host->mrq = NULL;
+
+	s3cmci_check_sdio_irq(host);
 	mmc_request_done(host->mmc, mrq);
 }
 
@@ -872,7 +1004,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
 
 	dcon  = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
 
-	if (host->dodma)
+	if (s3cmci_host_usedma(host))
 		dcon |= S3C2410_SDIDCON_DMAEN;
 
 	if (host->bus_width == MMC_BUS_WIDTH_4)
@@ -950,7 +1082,7 @@ static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
 static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
 {
 	int dma_len, i;
-	int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+	int rw = data->flags & MMC_DATA_WRITE;
 
 	BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
 
@@ -958,7 +1090,7 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
 	s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
 
 	dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
-			     (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+			     rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 
 	if (dma_len == 0)
 		return -ENOMEM;
@@ -969,11 +1101,11 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
 	for (i = 0; i < dma_len; i++) {
 		int res;
 
-		dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i,
-			sg_dma_address(&data->sg[i]),
-			sg_dma_len(&data->sg[i]));
+		dbg(host, dbg_dma, "enqueue %i: %08x@%u\n", i,
+		    sg_dma_address(&data->sg[i]),
+		    sg_dma_len(&data->sg[i]));
 
-		res = s3c2410_dma_enqueue(host->dma, (void *) host,
+		res = s3c2410_dma_enqueue(host->dma, host,
 					  sg_dma_address(&data->sg[i]),
 					  sg_dma_len(&data->sg[i]));
 
@@ -1018,7 +1150,7 @@ static void s3cmci_send_request(struct mmc_host *mmc)
 			return;
 		}
 
-		if (host->dodma)
+		if (s3cmci_host_usedma(host))
 			res = s3cmci_prepare_dma(host, cmd->data);
 		else
 			res = s3cmci_prepare_pio(host, cmd->data);
@@ -1037,7 +1169,7 @@ static void s3cmci_send_request(struct mmc_host *mmc)
 	s3cmci_send_command(host, cmd);
 
 	/* Enable Interrupt */
-	enable_irq(host->irq);
+	s3cmci_enable_irq(host, true);
 }
 
 static int s3cmci_card_present(struct mmc_host *mmc)
@@ -1049,7 +1181,7 @@ static int s3cmci_card_present(struct mmc_host *mmc)
 	if (pdata->gpio_detect == 0)
 		return -ENOSYS;
 
-	ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1;
+	ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
 	return ret ^ pdata->detect_invert;
 }
 
@@ -1104,12 +1236,12 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	switch (ios->power_mode) {
 	case MMC_POWER_ON:
 	case MMC_POWER_UP:
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK);
-		s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD);
-		s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-		s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2);
-		s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(5), S3C2410_GPE5_SDCLK);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(6), S3C2410_GPE6_SDCMD);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(7), S3C2410_GPE7_SDDAT0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(9), S3C2410_GPE9_SDDAT2);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(10), S3C2410_GPE10_SDDAT3);
 
 		if (host->pdata->set_power)
 			host->pdata->set_power(ios->power_mode, ios->vdd);
@@ -1121,8 +1253,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	case MMC_POWER_OFF:
 	default:
-		s3c2410_gpio_setpin(S3C2410_GPE5, 0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
+		gpio_direction_output(S3C2410_GPE(5), 0);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
@@ -1168,7 +1299,7 @@ static int s3cmci_get_ro(struct mmc_host *mmc)
 	struct s3c24xx_mci_pdata *pdata = host->pdata;
 	int ret;
 
-	if (pdata->gpio_wprotect == 0)
+	if (pdata->no_wprotect)
 		return 0;
 
 	ret = s3c2410_gpio_getpin(pdata->gpio_wprotect);
@@ -1179,11 +1310,52 @@ static int s3cmci_get_ro(struct mmc_host *mmc)
 	return ret;
 }
 
+static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u32 con;
+
+	local_irq_save(flags);
+
+	con = readl(host->base + S3C2410_SDICON);
+	host->sdio_irqen = enable;
+
+	if (enable == host->sdio_irqen)
+		goto same_state;
+
+	if (enable) {
+		con |= S3C2410_SDICON_SDIOIRQ;
+		enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
+
+		if (!host->irq_state && !host->irq_disabled) {
+			host->irq_state = true;
+			enable_irq(host->irq);
+		}
+	} else {
+		disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
+		con &= ~S3C2410_SDICON_SDIOIRQ;
+
+		if (!host->irq_enabled && host->irq_state) {
+			disable_irq_nosync(host->irq);
+			host->irq_state = false;
+		}
+	}
+
+	writel(con, host->base + S3C2410_SDICON);
+
+ same_state:
+	local_irq_restore(flags);
+
+	s3cmci_check_sdio_irq(host);
+}
+
 static struct mmc_host_ops s3cmci_ops = {
 	.request	= s3cmci_request,
 	.set_ios	= s3cmci_set_ios,
 	.get_ro		= s3cmci_get_ro,
 	.get_cd		= s3cmci_card_present,
+	.enable_sdio_irq = s3cmci_enable_sdio_irq,
 };
 
 static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
@@ -1246,11 +1418,140 @@ static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
 }
 #endif
 
-static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
+
+#ifdef CONFIG_DEBUG_FS
+
+static int s3cmci_state_show(struct seq_file *seq, void *v)
+{
+	struct s3cmci_host *host = seq->private;
+
+	seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
+	seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
+	seq_printf(seq, "Prescale = %d\n", host->prescaler);
+	seq_printf(seq, "is2440 = %d\n", host->is2440);
+	seq_printf(seq, "IRQ = %d\n", host->irq);
+	seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
+	seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
+	seq_printf(seq, "IRQ state = %d\n", host->irq_state);
+	seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
+	seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
+	seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
+	seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
+
+	return 0;
+}
+
+static int s3cmci_state_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, s3cmci_state_show, inode->i_private);
+}
+
+static const struct file_operations s3cmci_fops_state = {
+	.owner		= THIS_MODULE,
+	.open		= s3cmci_state_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
+
+struct s3cmci_reg {
+	unsigned short	addr;
+	unsigned char	*name;
+} debug_regs[] = {
+	DBG_REG(CON),
+	DBG_REG(PRE),
+	DBG_REG(CMDARG),
+	DBG_REG(CMDCON),
+	DBG_REG(CMDSTAT),
+	DBG_REG(RSP0),
+	DBG_REG(RSP1),
+	DBG_REG(RSP2),
+	DBG_REG(RSP3),
+	DBG_REG(TIMER),
+	DBG_REG(BSIZE),
+	DBG_REG(DCON),
+	DBG_REG(DCNT),
+	DBG_REG(DSTA),
+	DBG_REG(FSTA),
+	{}
+};
+
+static int s3cmci_regs_show(struct seq_file *seq, void *v)
+{
+	struct s3cmci_host *host = seq->private;
+	struct s3cmci_reg *rptr = debug_regs;
+
+	for (; rptr->name; rptr++)
+		seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
+			   readl(host->base + rptr->addr));
+
+	seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
+
+	return 0;
+}
+
+static int s3cmci_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, s3cmci_regs_show, inode->i_private);
+}
+
+static const struct file_operations s3cmci_fops_regs = {
+	.owner		= THIS_MODULE,
+	.open		= s3cmci_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void s3cmci_debugfs_attach(struct s3cmci_host *host)
+{
+	struct device *dev = &host->pdev->dev;
+
+	host->debug_root = debugfs_create_dir(dev_name(dev), NULL);
+	if (IS_ERR(host->debug_root)) {
+		dev_err(dev, "failed to create debugfs root\n");
+		return;
+	}
+
+	host->debug_state = debugfs_create_file("state", 0444,
+						host->debug_root, host,
+						&s3cmci_fops_state);
+
+	if (IS_ERR(host->debug_state))
+		dev_err(dev, "failed to create debug state file\n");
+
+	host->debug_regs = debugfs_create_file("regs", 0444,
+					       host->debug_root, host,
+					       &s3cmci_fops_regs);
+
+	if (IS_ERR(host->debug_regs))
+		dev_err(dev, "failed to create debug regs file\n");
+}
+
+static void s3cmci_debugfs_remove(struct s3cmci_host *host)
+{
+	debugfs_remove(host->debug_regs);
+	debugfs_remove(host->debug_state);
+	debugfs_remove(host->debug_root);
+}
+
+#else
+static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
+static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
+
+#endif /* CONFIG_DEBUG_FS */
+
+static int __devinit s3cmci_probe(struct platform_device *pdev)
 {
 	struct s3cmci_host *host;
 	struct mmc_host	*mmc;
 	int ret;
+	int is2440;
+	int i;
+
+	is2440 = platform_get_device_id(pdev)->driver_data;
 
 	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
 	if (!mmc) {
@@ -1258,6 +1559,18 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 		goto probe_out;
 	}
 
+	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
+		ret = gpio_request(i, dev_name(&pdev->dev));
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get gpio %d\n", i);
+
+			for (i--; i >= S3C2410_GPE(5); i--)
+				gpio_free(i);
+
+			goto probe_free_host;
+		}
+	}
+
 	host = mmc_priv(mmc);
 	host->mmc 	= mmc;
 	host->pdev	= pdev;
@@ -1282,11 +1595,12 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 		host->clk_div	= 2;
 	}
 
-	host->dodma		= 0;
 	host->complete_what 	= COMPLETION_NONE;
 	host->pio_active 	= XFER_NONE;
 
-	host->dma		= S3CMCI_DMA;
+#ifdef CONFIG_MMC_S3C_PIODMA
+	host->dodma		= host->pdata->dma;
+#endif
 
 	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!host->mem) {
@@ -1294,19 +1608,19 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 			"failed to get io memory region resouce.\n");
 
 		ret = -ENOENT;
-		goto probe_free_host;
+		goto probe_free_gpio;
 	}
 
 	host->mem = request_mem_region(host->mem->start,
-				       RESSIZE(host->mem), pdev->name);
+				       resource_size(host->mem), pdev->name);
 
 	if (!host->mem) {
 		dev_err(&pdev->dev, "failed to request io memory region.\n");
 		ret = -ENOENT;
-		goto probe_free_host;
+		goto probe_free_gpio;
 	}
 
-	host->base = ioremap(host->mem->start, RESSIZE(host->mem));
+	host->base = ioremap(host->mem->start, resource_size(host->mem));
 	if (!host->base) {
 		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
 		ret = -EINVAL;
@@ -1331,31 +1645,60 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 	 * ensure we don't lock the system with un-serviceable requests. */
 
 	disable_irq(host->irq);
+	host->irq_state = false;
 
-	host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
-
-	if (host->irq_cd >= 0) {
-		if (request_irq(host->irq_cd, s3cmci_irq_cd,
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				DRIVER_NAME, host)) {
-			dev_err(&pdev->dev, "can't get card detect irq.\n");
-			ret = -ENOENT;
+	if (!host->pdata->no_detect) {
+		ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect");
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get detect gpio\n");
 			goto probe_free_irq;
 		}
-	} else {
-		dev_warn(&pdev->dev, "host detect has no irq available\n");
-		s3c2410_gpio_cfgpin(host->pdata->gpio_detect,
-				    S3C2410_GPIO_INPUT);
+
+		host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
+
+		if (host->irq_cd >= 0) {
+			if (request_irq(host->irq_cd, s3cmci_irq_cd,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					DRIVER_NAME, host)) {
+				dev_err(&pdev->dev,
+					"can't get card detect irq.\n");
+				ret = -ENOENT;
+				goto probe_free_gpio_cd;
+			}
+		} else {
+			dev_warn(&pdev->dev,
+				 "host detect has no irq available\n");
+			gpio_direction_input(host->pdata->gpio_detect);
+		}
+	} else
+		host->irq_cd = -1;
+
+	if (!host->pdata->no_wprotect) {
+		ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp");
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get writeprotect\n");
+			goto probe_free_irq_cd;
+		}
+
+		gpio_direction_input(host->pdata->gpio_wprotect);
 	}
 
-	if (host->pdata->gpio_wprotect)
-		s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect,
-				    S3C2410_GPIO_INPUT);
+	/* depending on the dma state, get a dma channel to use. */
 
-	if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) {
-		dev_err(&pdev->dev, "unable to get DMA channel.\n");
-		ret = -EBUSY;
-		goto probe_free_irq_cd;
+	if (s3cmci_host_usedma(host)) {
+		host->dma = s3c2410_dma_request(DMACH_SDI, &s3cmci_dma_client,
+						host);
+		if (host->dma < 0) {
+			dev_err(&pdev->dev, "cannot get DMA channel.\n");
+			if (!s3cmci_host_canpio()) {
+				ret = -EBUSY;
+				goto probe_free_gpio_wp;
+			} else {
+				dev_warn(&pdev->dev, "falling back to PIO.\n");
+				host->dodma = 0;
+			}
+		}
 	}
 
 	host->clk = clk_get(&pdev->dev, "sdi");
@@ -1363,7 +1706,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 		dev_err(&pdev->dev, "failed to find clock source.\n");
 		ret = PTR_ERR(host->clk);
 		host->clk = NULL;
-		goto probe_free_host;
+		goto probe_free_dma;
 	}
 
 	ret = clk_enable(host->clk);
@@ -1376,7 +1719,11 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 
 	mmc->ops 	= &s3cmci_ops;
 	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
+#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
+	mmc->caps	= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+#else
 	mmc->caps	= MMC_CAP_4_BIT_DATA;
+#endif
 	mmc->f_min 	= host->clk_rate / (host->clk_div * 256);
 	mmc->f_max 	= host->clk_rate / host->clk_div;
 
@@ -1408,8 +1755,12 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 		goto free_cpufreq;
 	}
 
+	s3cmci_debugfs_attach(host);
+
 	platform_set_drvdata(pdev, mmc);
-	dev_info(&pdev->dev, "initialisation done.\n");
+	dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
+		 s3cmci_host_usedma(host) ? "dma" : "pio",
+		 mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
 
 	return 0;
 
@@ -1422,6 +1773,18 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
  clk_free:
 	clk_put(host->clk);
 
+ probe_free_dma:
+	if (s3cmci_host_usedma(host))
+		s3c2410_dma_free(host->dma, &s3cmci_dma_client);
+
+ probe_free_gpio_wp:
+	if (!host->pdata->no_wprotect)
+		gpio_free(host->pdata->gpio_wprotect);
+
+ probe_free_gpio_cd:
+	if (!host->pdata->no_detect)
+		gpio_free(host->pdata->gpio_detect);
+
  probe_free_irq_cd:
 	if (host->irq_cd >= 0)
 		free_irq(host->irq_cd, host);
@@ -1433,10 +1796,15 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 	iounmap(host->base);
 
  probe_free_mem_region:
-	release_mem_region(host->mem->start, RESSIZE(host->mem));
+	release_mem_region(host->mem->start, resource_size(host->mem));
+
+ probe_free_gpio:
+	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+		gpio_free(i);
 
  probe_free_host:
 	mmc_free_host(mmc);
+
  probe_out:
 	return ret;
 }
@@ -1449,6 +1817,7 @@ static void s3cmci_shutdown(struct platform_device *pdev)
 	if (host->irq_cd >= 0)
 		free_irq(host->irq_cd, host);
 
+	s3cmci_debugfs_remove(host);
 	s3cmci_cpufreq_deregister(host);
 	mmc_remove_host(mmc);
 	clk_disable(host->clk);
@@ -1458,104 +1827,102 @@ static int __devexit s3cmci_remove(struct platform_device *pdev)
 {
 	struct mmc_host		*mmc  = platform_get_drvdata(pdev);
 	struct s3cmci_host	*host = mmc_priv(mmc);
+	struct s3c24xx_mci_pdata *pd = host->pdata;
+	int i;
 
 	s3cmci_shutdown(pdev);
 
 	clk_put(host->clk);
 
 	tasklet_disable(&host->pio_tasklet);
-	s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client);
+
+	if (s3cmci_host_usedma(host))
+		s3c2410_dma_free(host->dma, &s3cmci_dma_client);
 
 	free_irq(host->irq, host);
 
+	if (!pd->no_wprotect)
+		gpio_free(pd->gpio_wprotect);
+
+	if (!pd->no_detect)
+		gpio_free(pd->gpio_detect);
+
+	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+		gpio_free(i);
+
+
 	iounmap(host->base);
-	release_mem_region(host->mem->start, RESSIZE(host->mem));
+	release_mem_region(host->mem->start, resource_size(host->mem));
 
 	mmc_free_host(mmc);
 	return 0;
 }
 
-static int __devinit s3cmci_2410_probe(struct platform_device *dev)
-{
-	return s3cmci_probe(dev, 0);
-}
+static struct platform_device_id s3cmci_driver_ids[] = {
+	{
+		.name	= "s3c2410-sdi",
+		.driver_data	= 0,
+	}, {
+		.name	= "s3c2412-sdi",
+		.driver_data	= 1,
+	}, {
+		.name	= "s3c2440-sdi",
+		.driver_data	= 1,
+	},
+	{ }
+};
 
-static int __devinit s3cmci_2412_probe(struct platform_device *dev)
-{
-	return s3cmci_probe(dev, 1);
-}
+MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
 
-static int __devinit s3cmci_2440_probe(struct platform_device *dev)
-{
-	return s3cmci_probe(dev, 1);
-}
 
 #ifdef CONFIG_PM
 
-static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
+static int s3cmci_suspend(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
+	struct pm_message event = { PM_EVENT_SUSPEND };
 
-	return  mmc_suspend_host(mmc, state);
+	return mmc_suspend_host(mmc, event);
 }
 
-static int s3cmci_resume(struct platform_device *dev)
+static int s3cmci_resume(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
 
 	return mmc_resume_host(mmc);
 }
 
-#else /* CONFIG_PM */
-#define s3cmci_suspend NULL
-#define s3cmci_resume NULL
-#endif /* CONFIG_PM */
-
-
-static struct platform_driver s3cmci_2410_driver = {
-	.driver.name	= "s3c2410-sdi",
-	.driver.owner	= THIS_MODULE,
-	.probe		= s3cmci_2410_probe,
-	.remove		= __devexit_p(s3cmci_remove),
-	.shutdown	= s3cmci_shutdown,
+static struct dev_pm_ops s3cmci_pm = {
 	.suspend	= s3cmci_suspend,
 	.resume		= s3cmci_resume,
 };
 
-static struct platform_driver s3cmci_2412_driver = {
-	.driver.name	= "s3c2412-sdi",
-	.driver.owner	= THIS_MODULE,
-	.probe		= s3cmci_2412_probe,
-	.remove		= __devexit_p(s3cmci_remove),
-	.shutdown	= s3cmci_shutdown,
-	.suspend	= s3cmci_suspend,
-	.resume		= s3cmci_resume,
-};
+#define s3cmci_pm_ops &s3cmci_pm
+#else /* CONFIG_PM */
+#define s3cmci_pm_ops NULL
+#endif /* CONFIG_PM */
 
-static struct platform_driver s3cmci_2440_driver = {
-	.driver.name	= "s3c2440-sdi",
-	.driver.owner	= THIS_MODULE,
-	.probe		= s3cmci_2440_probe,
+
+static struct platform_driver s3cmci_driver = {
+	.driver	= {
+		.name	= "s3c-sdi",
+		.owner	= THIS_MODULE,
+		.pm	= s3cmci_pm_ops,
+	},
+	.id_table	= s3cmci_driver_ids,
+	.probe		= s3cmci_probe,
 	.remove		= __devexit_p(s3cmci_remove),
 	.shutdown	= s3cmci_shutdown,
-	.suspend	= s3cmci_suspend,
-	.resume		= s3cmci_resume,
 };
 
-
 static int __init s3cmci_init(void)
 {
-	platform_driver_register(&s3cmci_2410_driver);
-	platform_driver_register(&s3cmci_2412_driver);
-	platform_driver_register(&s3cmci_2440_driver);
-	return 0;
+	return platform_driver_register(&s3cmci_driver);
 }
 
 static void __exit s3cmci_exit(void)
 {
-	platform_driver_unregister(&s3cmci_2410_driver);
-	platform_driver_unregister(&s3cmci_2412_driver);
-	platform_driver_unregister(&s3cmci_2440_driver);
+	platform_driver_unregister(&s3cmci_driver);
 }
 
 module_init(s3cmci_init);
@@ -1564,6 +1931,3 @@ module_exit(s3cmci_exit);
 MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
-MODULE_ALIAS("platform:s3c2410-sdi");
-MODULE_ALIAS("platform:s3c2412-sdi");
-MODULE_ALIAS("platform:s3c2440-sdi");
diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
index ca1ba3d58cfd..c76b53dbeb61 100644
--- a/drivers/mmc/host/s3cmci.h
+++ b/drivers/mmc/host/s3cmci.h
@@ -8,9 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-/* FIXME: DMA Resource management ?! */
-#define S3CMCI_DMA 0
-
 enum s3cmci_waitfor {
 	COMPLETION_NONE,
 	COMPLETION_FINALIZE,
@@ -42,6 +39,11 @@ struct s3cmci_host {
 	int			dodma;
 	int			dmatogo;
 
+	bool			irq_disabled;
+	bool			irq_enabled;
+	bool			irq_state;
+	int			sdio_irqen;
+
 	struct mmc_request	*mrq;
 	int			cmd_is_stop;
 
@@ -68,6 +70,12 @@ struct s3cmci_host {
 	unsigned int		ccnt, dcnt;
 	struct tasklet_struct	pio_tasklet;
 
+#ifdef CONFIG_DEBUG_FS
+	struct dentry		*debug_root;
+	struct dentry		*debug_state;
+	struct dentry		*debug_regs;
+#endif
+
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
 #endif
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 379c316f329e..4c19269de91a 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/math64.h>
+#include <linux/sched.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index c2baf3353f84..0a11721f146e 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 0acbf4f5be50..8ca17a3e96ea 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -32,14 +32,6 @@ struct mtd_blkcore_priv {
 	spinlock_t queue_lock;
 };
 
-static int blktrans_discard_request(struct request_queue *q,
-				    struct request *req)
-{
-	req->cmd_type = REQ_TYPE_LINUX_BLOCK;
-	req->cmd[0] = REQ_LB_OP_DISCARD;
-	return 0;
-}
-
 static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 			       struct mtd_blktrans_dev *dev,
 			       struct request *req)
@@ -52,10 +44,6 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 
 	buf = req->buffer;
 
-	if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
-	    req->cmd[0] == REQ_LB_OP_DISCARD)
-		return tr->discard(dev, block, nsect);
-
 	if (!blk_fs_request(req))
 		return -EIO;
 
@@ -63,6 +51,9 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 	    get_capacity(req->rq_disk))
 		return -EIO;
 
+	if (blk_discard_rq(req))
+		return tr->discard(dev, block, nsect);
+
 	switch(rq_data_dir(req)) {
 	case READ:
 		for (; nsect > 0; nsect--, block++, buf += tr->blksize)
@@ -380,8 +371,8 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	tr->blkcore_priv->rq->queuedata = tr;
 	blk_queue_logical_block_size(tr->blkcore_priv->rq, tr->blksize);
 	if (tr->discard)
-		blk_queue_set_discard(tr->blkcore_priv->rq,
-				      blktrans_discard_request);
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+					tr->blkcore_priv->rq);
 
 	tr->blkshift = ffs(tr->blksize) - 1;
 
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index e1f7d0a78b9d..14cec04c34f9 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -42,6 +42,7 @@
 #include <linux/log2.h>
 #include <linux/kthread.h>
 #include <linux/reboot.h>
+#include <linux/kernel.h>
 #include "ubi.h"
 
 /* Maximum length of the 'mtd=' parameter */
@@ -1257,7 +1258,7 @@ static int __init bytes_str_to_int(const char *str)
 	unsigned long result;
 
 	result = simple_strtoul(str, &endp, 0);
-	if (str == endp || result < 0) {
+	if (str == endp || result >= INT_MAX) {
 		printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
 		       str);
 		return -EINVAL;
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index e7161adc419d..90af61a2c3e4 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -794,16 +794,15 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 		 * number.
 		 */
 		image_seq = be32_to_cpu(ech->image_seq);
-		if (!si->image_seq_set) {
+		if (!ubi->image_seq && image_seq)
 			ubi->image_seq = image_seq;
-			si->image_seq_set = 1;
-		} else if (ubi->image_seq && ubi->image_seq != image_seq) {
+		if (ubi->image_seq && image_seq &&
+		    ubi->image_seq != image_seq) {
 			ubi_err("bad image sequence number %d in PEB %d, "
 				"expected %d", image_seq, pnum, ubi->image_seq);
 			ubi_dbg_dump_ec_hdr(ech);
 			return -EINVAL;
 		}
-
 	}
 
 	/* OK, we've done with the EC header, let's look at the VID header */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index bab31695dace..ff179ad7ca55 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -103,7 +103,6 @@ struct ubi_scan_volume {
  * @ec_sum: a temporary variable used when calculating @mean_ec
  * @ec_count: a temporary variable used when calculating @mean_ec
  * @corr_count: count of corrupted PEBs
- * @image_seq_set: indicates @ubi->image_seq is known
  *
  * This data structure contains the result of scanning and may be used by other
  * UBI sub-systems to build final UBI data structures, further error-recovery
@@ -127,7 +126,6 @@ struct ubi_scan_info {
 	uint64_t ec_sum;
 	int ec_count;
 	int corr_count;
-	int image_seq_set;
 };
 
 struct ubi_device;
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index b9eeadf01b74..975e25b19ebe 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -805,52 +805,54 @@ static void poll_vortex(struct net_device *dev)
 
 #ifdef CONFIG_PM
 
-static int vortex_suspend(struct pci_dev *pdev, pm_message_t state)
+static int vortex_suspend(struct device *dev)
 {
-	struct net_device *dev = pci_get_drvdata(pdev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct net_device *ndev = pci_get_drvdata(pdev);
+
+	if (!ndev || !netif_running(ndev))
+		return 0;
+
+	netif_device_detach(ndev);
+	vortex_down(ndev, 1);
 
-	if (dev && netdev_priv(dev)) {
-		if (netif_running(dev)) {
-			netif_device_detach(dev);
-			vortex_down(dev, 1);
-			disable_irq(dev->irq);
-		}
-		pci_save_state(pdev);
-		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
-		pci_disable_device(pdev);
-		pci_set_power_state(pdev, pci_choose_state(pdev, state));
-	}
 	return 0;
 }
 
-static int vortex_resume(struct pci_dev *pdev)
+static int vortex_resume(struct device *dev)
 {
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct vortex_private *vp = netdev_priv(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct net_device *ndev = pci_get_drvdata(pdev);
 	int err;
 
-	if (dev && vp) {
-		pci_set_power_state(pdev, PCI_D0);
-		pci_restore_state(pdev);
-		err = pci_enable_device(pdev);
-		if (err) {
-			pr_warning("%s: Could not enable device\n",
-				dev->name);
-			return err;
-		}
-		pci_set_master(pdev);
-		if (netif_running(dev)) {
-			err = vortex_up(dev);
-			if (err)
-				return err;
-			enable_irq(dev->irq);
-			netif_device_attach(dev);
-		}
-	}
+	if (!ndev || !netif_running(ndev))
+		return 0;
+
+	err = vortex_up(ndev);
+	if (err)
+		return err;
+
+	netif_device_attach(ndev);
+
 	return 0;
 }
 
-#endif /* CONFIG_PM */
+static struct dev_pm_ops vortex_pm_ops = {
+	.suspend = vortex_suspend,
+	.resume = vortex_resume,
+	.freeze = vortex_suspend,
+	.thaw = vortex_resume,
+	.poweroff = vortex_suspend,
+	.restore = vortex_resume,
+};
+
+#define VORTEX_PM_OPS (&vortex_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define VORTEX_PM_OPS NULL
+
+#endif /* !CONFIG_PM */
 
 #ifdef CONFIG_EISA
 static struct eisa_device_id vortex_eisa_ids[] = {
@@ -3199,10 +3201,7 @@ static struct pci_driver vortex_driver = {
 	.probe		= vortex_init_one,
 	.remove		= __devexit_p(vortex_remove_one),
 	.id_table	= vortex_pci_tbl,
-#ifdef CONFIG_PM
-	.suspend	= vortex_suspend,
-	.resume		= vortex_resume,
-#endif
+	.driver.pm	= VORTEX_PM_OPS,
 };
 
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2bea67c134f0..e19ca4bb7510 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1738,6 +1738,14 @@ config KS8851
        help
          SPI driver for Micrel KS8851 SPI attached network chip.
 
+config KS8851_MLL
+	tristate "Micrel KS8851 MLL"
+	depends on HAS_IOMEM
+	select MII
+	help
+	  This platform driver is for Micrel KS8851 Address/data bus
+	  multiplexed network chip.
+
 config VIA_RHINE
 	tristate "VIA Rhine support"
 	depends on NET_PCI && PCI
@@ -2475,6 +2483,8 @@ config S6GMAC
 	  To compile this driver as a module, choose M here. The module
 	  will be called s6gmac.
 
+source "drivers/net/stmmac/Kconfig"
+
 endif # NETDEV_1000
 
 #
@@ -3223,4 +3233,12 @@ config VIRTIO_NET
 	  This is the virtual network driver for virtio.  It can be used with
           lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
+config VMXNET3
+       tristate "VMware VMXNET3 ethernet driver"
+       depends on PCI && X86 && INET
+       help
+         This driver supports VMware's vmxnet3 virtual ethernet NIC.
+         To compile this driver as a module, choose M here: the
+         module will be called vmxnet3.
+
 endif # NETDEVICES
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ae8cd30f13d6..246323d7f161 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -2,6 +2,10 @@
 # Makefile for the Linux network (ethercard) device drivers.
 #
 
+obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_MDIO) += mdio.o
+obj-$(CONFIG_PHYLIB) += phy/
+
 obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
 
 obj-$(CONFIG_E1000) += e1000/
@@ -26,6 +30,7 @@ obj-$(CONFIG_TEHUTI) += tehuti.o
 obj-$(CONFIG_ENIC) += enic/
 obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_BE2NET) += benet/
+obj-$(CONFIG_VMXNET3) += vmxnet3/
 
 gianfar_driver-objs := gianfar.o \
 		gianfar_ethtool.o \
@@ -89,20 +94,18 @@ obj-$(CONFIG_SKY2) += sky2.o
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_KS8842)	+= ks8842.o
 obj-$(CONFIG_KS8851)	+= ks8851.o
+obj-$(CONFIG_KS8851_MLL)	+= ks8851_mll.o
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
 obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_SH_ETH) += sh_eth.o
+obj-$(CONFIG_STMMAC_ETH) += stmmac/
 
 #
 # end link order section
 #
 
-obj-$(CONFIG_MII) += mii.o
-obj-$(CONFIG_MDIO) += mdio.o
-obj-$(CONFIG_PHYLIB) += phy/
-
 obj-$(CONFIG_SUNDANCE) += sundance.o
 obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 5f0b05c2d71f..d82a9a994753 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -1209,7 +1209,8 @@ static int __devinit ace_init(struct net_device *dev)
 	memset(ap->info, 0, sizeof(struct ace_info));
 	memset(ap->skb, 0, sizeof(struct ace_skb));
 
-	if (ace_load_firmware(dev))
+	ecode = ace_load_firmware(dev);
+	if (ecode)
 		goto init_error;
 
 	ap->fw_running = 0;
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index fdf5937233fc..04f63c77071d 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -721,7 +721,7 @@ static inline void update_rx_stats(struct net_device *dev, u32 status)
 		ps->rx_errors++;
 		if (status & RX_MISSED_FRAME)
 			ps->rx_missed_errors++;
-		if (status & (RX_OVERLEN | RX_OVERLEN | RX_LEN_ERROR))
+		if (status & (RX_OVERLEN | RX_RUNT | RX_LEN_ERROR))
 			ps->rx_length_errors++;
 		if (status & RX_CRC_ERROR)
 			ps->rx_crc_errors++;
@@ -794,8 +794,6 @@ static int au1000_rx(struct net_device *dev)
 					printk("rx len error\n");
 				if (status & RX_U_CNTRL_FRAME)
 					printk("rx u control frame\n");
-				if (status & RX_MISSED_FRAME)
-					printk("rx miss\n");
 			}
 		}
 		prxd->buff_stat = (u32)(pDB->dma_addr | RX_DMA_ENABLE);
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
index 09d270913c50..ba29dc319b34 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/bcm63xx_enet.c
@@ -90,7 +90,7 @@ static int do_mdio_op(struct bcm_enet_priv *priv, unsigned int data)
 		if (enet_readl(priv, ENET_IR_REG) & ENET_IR_MII)
 			break;
 		udelay(1);
-	} while (limit-- >= 0);
+	} while (limit-- > 0);
 
 	return (limit < 0) ? 1 : 0;
 }
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 684c6fe24c8d..a80da0e14a52 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -258,6 +258,7 @@ struct be_adapter {
 	bool link_up;
 	u32 port_num;
 	bool promiscuous;
+	u32 cap;
 };
 
 extern const struct ethtool_ops be_ethtool_ops;
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 3dd76c4170bf..28a0eda92680 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -243,15 +243,26 @@ static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
 
 int be_cmd_POST(struct be_adapter *adapter)
 {
-	u16 stage, error;
+	u16 stage;
+	int status, timeout = 0;
 
-	error = be_POST_stage_get(adapter, &stage);
-	if (error || stage != POST_STAGE_ARMFW_RDY) {
-		dev_err(&adapter->pdev->dev, "POST failed.\n");
-		return -1;
-	}
+	do {
+		status = be_POST_stage_get(adapter, &stage);
+		if (status) {
+			dev_err(&adapter->pdev->dev, "POST error; stage=0x%x\n",
+				stage);
+			return -1;
+		} else if (stage != POST_STAGE_ARMFW_RDY) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(2 * HZ);
+			timeout += 2;
+		} else {
+			return 0;
+		}
+	} while (timeout < 20);
 
-	return 0;
+	dev_err(&adapter->pdev->dev, "POST timeout; stage=0x%x\n", stage);
+	return -1;
 }
 
 static inline void *embedded_payload(struct be_mcc_wrb *wrb)
@@ -729,8 +740,8 @@ int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 /* Create an rx filtering policy configuration on an i/f
  * Uses mbox
  */
-int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac,
-		bool pmac_invalid, u32 *if_handle, u32 *pmac_id)
+int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, u32 en_flags,
+		u8 *mac, bool pmac_invalid, u32 *if_handle, u32 *pmac_id)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_if_create *req;
@@ -746,8 +757,8 @@ int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac,
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req));
 
-	req->capability_flags = cpu_to_le32(flags);
-	req->enable_flags = cpu_to_le32(flags);
+	req->capability_flags = cpu_to_le32(cap_flags);
+	req->enable_flags = cpu_to_le32(en_flags);
 	req->pmac_invalid = pmac_invalid;
 	if (!pmac_invalid)
 		memcpy(req->mac_addr, mac, ETH_ALEN);
@@ -1068,7 +1079,7 @@ int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc)
 }
 
 /* Uses mbox */
-int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num)
+int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num, u32 *cap)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_query_fw_cfg *req;
@@ -1088,6 +1099,7 @@ int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num)
 	if (!status) {
 		struct be_cmd_resp_query_fw_cfg *resp = embedded_payload(wrb);
 		*port_num = le32_to_cpu(resp->phys_port);
+		*cap = le32_to_cpu(resp->function_cap);
 	}
 
 	spin_unlock(&adapter->mbox_lock);
@@ -1128,7 +1140,6 @@ int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
-	req = embedded_payload(wrb);
 	sge = nonembedded_sgl(wrb);
 
 	be_wrb_hdr_prepare(wrb, cmd->size, false, 1);
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 93e432f3d926..49953787e41c 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -62,7 +62,7 @@ enum {
 	MCC_STATUS_QUEUE_FLUSHING = 0x4,
 /* The command is completing with a DMA error */
 	MCC_STATUS_DMA_FAILED = 0x5,
-	MCC_STATUS_NOT_SUPPORTED = 0x66
+	MCC_STATUS_NOT_SUPPORTED = 66
 };
 
 #define CQE_STATUS_COMPL_MASK		0xFFFF
@@ -720,8 +720,9 @@ extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
 extern int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr,
 			u32 if_id, u32 *pmac_id);
 extern int be_cmd_pmac_del(struct be_adapter *adapter, u32 if_id, u32 pmac_id);
-extern int be_cmd_if_create(struct be_adapter *adapter, u32 if_flags, u8 *mac,
-			bool pmac_invalid, u32 *if_handle, u32 *pmac_id);
+extern int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags,
+			u32 en_flags, u8 *mac, bool pmac_invalid,
+			u32 *if_handle, u32 *pmac_id);
 extern int be_cmd_if_destroy(struct be_adapter *adapter, u32 if_handle);
 extern int be_cmd_eq_create(struct be_adapter *adapter,
 			struct be_queue_info *eq, int eq_delay);
@@ -760,7 +761,8 @@ extern int be_cmd_set_flow_control(struct be_adapter *adapter,
 			u32 tx_fc, u32 rx_fc);
 extern int be_cmd_get_flow_control(struct be_adapter *adapter,
 			u32 *tx_fc, u32 *rx_fc);
-extern int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num);
+extern int be_cmd_query_fw_cfg(struct be_adapter *adapter,
+			u32 *port_num, u32 *cap);
 extern int be_cmd_reset_function(struct be_adapter *adapter);
 extern int be_process_mcc(struct be_adapter *adapter);
 extern int be_cmd_write_flashrom(struct be_adapter *adapter,
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 11445df3dbc0..cda5bf2fc50a 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -358,7 +358,7 @@ const struct ethtool_ops be_ethtool_ops = {
 	.get_rx_csum = be_get_rx_csum,
 	.set_rx_csum = be_set_rx_csum,
 	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_csum,
+	.set_tx_csum = ethtool_op_set_tx_hw_csum,
 	.get_sg = ethtool_op_get_sg,
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = ethtool_op_get_tso,
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 409cf0595903..1f941f027718 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -197,7 +197,7 @@ void netdev_stats_update(struct be_adapter *adapter)
 	/* no space available in linux */
 	dev_stats->tx_dropped = 0;
 
-	dev_stats->multicast = port_stats->tx_multicastframes;
+	dev_stats->multicast = port_stats->rx_multicast_frames;
 	dev_stats->collisions = 0;
 
 	/* detailed tx_errors */
@@ -747,9 +747,16 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 			struct be_eth_rx_compl *rxcp)
 {
 	struct sk_buff *skb;
-	u32 vtp, vid;
+	u32 vlanf, vid;
+	u8 vtm;
 
-	vtp = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+	vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+	vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp);
+
+	/* vlanf could be wrongly set in some cards.
+	 * ignore if vtm is not set */
+	if ((adapter->cap == 0x400) && !vtm)
+		vlanf = 0;
 
 	skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN);
 	if (!skb) {
@@ -772,7 +779,7 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 	skb->protocol = eth_type_trans(skb, adapter->netdev);
 	skb->dev = adapter->netdev;
 
-	if (vtp) {
+	if (vlanf) {
 		if (!adapter->vlan_grp || adapter->num_vlans == 0) {
 			kfree_skb(skb);
 			return;
@@ -797,11 +804,18 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
 	struct be_eq_obj *eq_obj =  &adapter->rx_eq;
 	u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
 	u16 i, rxq_idx = 0, vid, j;
+	u8 vtm;
 
 	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
 	pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
 	vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
 	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+	vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp);
+
+	/* vlanf could be wrongly set in some cards.
+	 * ignore if vtm is not set */
+	if ((adapter->cap == 0x400) && !vtm)
+		vlanf = 0;
 
 	skb = napi_get_frags(&eq_obj->napi);
 	if (!skb) {
@@ -1606,19 +1620,22 @@ static int be_open(struct net_device *netdev)
 static int be_setup(struct be_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	u32 if_flags;
+	u32 cap_flags, en_flags;
 	int status;
 
-	if_flags = BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PROMISCUOUS |
-		BE_IF_FLAGS_MCAST_PROMISCUOUS | BE_IF_FLAGS_UNTAGGED |
-		BE_IF_FLAGS_PASS_L3L4_ERRORS;
-	status = be_cmd_if_create(adapter, if_flags, netdev->dev_addr,
-			false/* pmac_invalid */, &adapter->if_handle,
-			&adapter->pmac_id);
+	cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
+			BE_IF_FLAGS_MCAST_PROMISCUOUS |
+			BE_IF_FLAGS_PROMISCUOUS |
+			BE_IF_FLAGS_PASS_L3L4_ERRORS;
+	en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
+			BE_IF_FLAGS_PASS_L3L4_ERRORS;
+
+	status = be_cmd_if_create(adapter, cap_flags, en_flags,
+			netdev->dev_addr, false/* pmac_invalid */,
+			&adapter->if_handle, &adapter->pmac_id);
 	if (status != 0)
 		goto do_none;
 
-
 	status = be_tx_queues_create(adapter);
 	if (status != 0)
 		goto if_destroy;
@@ -1885,8 +1902,8 @@ static void be_netdev_init(struct net_device *netdev)
 	struct be_adapter *adapter = netdev_priv(netdev);
 
 	netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
-		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM |
-		NETIF_F_IPV6_CSUM | NETIF_F_GRO;
+		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_HW_CSUM |
+		NETIF_F_GRO;
 
 	netdev->flags |= IFF_MULTICAST;
 
@@ -2041,11 +2058,16 @@ static int be_hw_up(struct be_adapter *adapter)
 	if (status)
 		return status;
 
+	status = be_cmd_reset_function(adapter);
+	if (status)
+		return status;
+
 	status = be_cmd_get_fw_ver(adapter, adapter->fw_ver);
 	if (status)
 		return status;
 
-	status = be_cmd_query_fw_cfg(adapter, &adapter->port_num);
+	status = be_cmd_query_fw_cfg(adapter,
+				&adapter->port_num, &adapter->cap);
 	return status;
 }
 
@@ -2093,10 +2115,6 @@ static int __devinit be_probe(struct pci_dev *pdev,
 	if (status)
 		goto free_netdev;
 
-	status = be_cmd_reset_function(adapter);
-	if (status)
-		goto ctrl_clean;
-
 	status = be_stats_init(adapter);
 	if (status)
 		goto ctrl_clean;
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 6044e12ff9fc..8762a27a2a18 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/sched.h>
 #include <linux/sysdev.h>
 #include <linux/fs.h>
 #include <linux/types.h>
@@ -1182,6 +1183,7 @@ static ssize_t bonding_store_primary(struct device *d,
 				       ": %s: Setting %s as primary slave.\n",
 				       bond->dev->name, slave->dev->name);
 				bond->primary_slave = slave;
+				strcpy(bond->params.primary, slave->dev->name);
 				bond_select_active_slave(bond);
 				goto out;
 			}
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
index 3373560405ba..9dd076a626a5 100644
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -213,6 +213,7 @@ static struct of_device_id __devinitdata sja1000_ofp_table[] = {
 	{.compatible = "nxp,sja1000"},
 	{},
 };
+MODULE_DEVICE_TABLE(of, sja1000_ofp_table);
 
 static struct of_platform_driver sja1000_ofp_driver = {
 	.owner = THIS_MODULE,
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 211c8e9182fc..46c87ec7960c 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -2733,7 +2733,8 @@ static int cnic_netdev_event(struct notifier_block *this, unsigned long event,
 			cnic_ulp_init(dev);
 		else if (event == NETDEV_UNREGISTER)
 			cnic_ulp_exit(dev);
-		else if (event == NETDEV_UP) {
+
+		if (event == NETDEV_UP) {
 			if (cnic_register_netdev(dev) != 0) {
 				cnic_put(dev);
 				goto done;
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index a49235739eef..d8b09efdcb52 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -12,8 +12,8 @@
 #ifndef CNIC_IF_H
 #define CNIC_IF_H
 
-#define CNIC_MODULE_VERSION	"2.0.0"
-#define CNIC_MODULE_RELDATE	"May 21, 2009"
+#define CNIC_MODULE_VERSION	"2.0.1"
+#define CNIC_MODULE_RELDATE	"Oct 01, 2009"
 
 #define CNIC_ULP_RDMA		0
 #define CNIC_ULP_ISCSI		1
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 65a2d0ba64e2..f72c56dec33c 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -333,6 +333,9 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 #define EMAC_DM646X_MAC_EOI_C0_RXEN	(0x01)
 #define EMAC_DM646X_MAC_EOI_C0_TXEN	(0x02)
 
+/* EMAC Stats Clear Mask */
+#define EMAC_STATS_CLR_MASK    (0xFFFFFFFF)
+
 /** net_buf_obj: EMAC network bufferdata structure
  *
  * EMAC network buffer data structure
@@ -2548,40 +2551,49 @@ static int emac_dev_stop(struct net_device *ndev)
 static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
 {
 	struct emac_priv *priv = netdev_priv(ndev);
+	u32 mac_control;
+	u32 stats_clear_mask;
 
 	/* update emac hardware stats and reset the registers*/
 
+	mac_control = emac_read(EMAC_MACCONTROL);
+
+	if (mac_control & EMAC_MACCONTROL_GMIIEN)
+		stats_clear_mask = EMAC_STATS_CLR_MASK;
+	else
+		stats_clear_mask = 0;
+
 	priv->net_dev_stats.multicast += emac_read(EMAC_RXMCASTFRAMES);
-	emac_write(EMAC_RXMCASTFRAMES, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask);
 
 	priv->net_dev_stats.collisions += (emac_read(EMAC_TXCOLLISION) +
 					   emac_read(EMAC_TXSINGLECOLL) +
 					   emac_read(EMAC_TXMULTICOLL));
-	emac_write(EMAC_TXCOLLISION, EMAC_ALL_MULTI_REG_VALUE);
-	emac_write(EMAC_TXSINGLECOLL, EMAC_ALL_MULTI_REG_VALUE);
-	emac_write(EMAC_TXMULTICOLL, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_TXCOLLISION, stats_clear_mask);
+	emac_write(EMAC_TXSINGLECOLL, stats_clear_mask);
+	emac_write(EMAC_TXMULTICOLL, stats_clear_mask);
 
 	priv->net_dev_stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) +
 						emac_read(EMAC_RXJABBER) +
 						emac_read(EMAC_RXUNDERSIZED));
-	emac_write(EMAC_RXOVERSIZED, EMAC_ALL_MULTI_REG_VALUE);
-	emac_write(EMAC_RXJABBER, EMAC_ALL_MULTI_REG_VALUE);
-	emac_write(EMAC_RXUNDERSIZED, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXOVERSIZED, stats_clear_mask);
+	emac_write(EMAC_RXJABBER, stats_clear_mask);
+	emac_write(EMAC_RXUNDERSIZED, stats_clear_mask);
 
 	priv->net_dev_stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) +
 					       emac_read(EMAC_RXMOFOVERRUNS));
-	emac_write(EMAC_RXSOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
-	emac_write(EMAC_RXMOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask);
+	emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask);
 
 	priv->net_dev_stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS);
-	emac_write(EMAC_RXDMAOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask);
 
 	priv->net_dev_stats.tx_carrier_errors +=
 		emac_read(EMAC_TXCARRIERSENSE);
-	emac_write(EMAC_TXCARRIERSENSE, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask);
 
 	priv->net_dev_stats.tx_fifo_errors = emac_read(EMAC_TXUNDERRUN);
-	emac_write(EMAC_TXUNDERRUN, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
 
 	return &priv->net_dev_stats;
 }
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 9686c1fa28f1..7a3bdac84abe 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -237,6 +237,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 679965c2bb86..5d2f48f02251 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -151,6 +151,7 @@
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 1a4f89c66a26..42e2b7e21c29 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -149,7 +149,6 @@ do {									\
 
 #define AUTO_ALL_MODES            0
 #define E1000_EEPROM_82544_APM    0x0004
-#define E1000_EEPROM_ICH8_APME    0x0004
 #define E1000_EEPROM_APME         0x0400
 
 #ifndef E1000_MASTER_SLAVE
@@ -293,7 +292,6 @@ struct e1000_adapter {
 
 	u64 hw_csum_err;
 	u64 hw_csum_good;
-	u64 rx_hdr_split;
 	u32 alloc_rx_buff_failed;
 	u32 rx_int_delay;
 	u32 rx_abs_int_delay;
@@ -317,7 +315,6 @@ struct e1000_adapter {
 	struct e1000_rx_ring test_rx_ring;
 
 	int msg_enable;
-	bool have_msi;
 
 	/* to not mess up cache alignment, always add to the bottom */
 	bool tso_force;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 27f996a2010f..490b2b7cd3ab 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -82,7 +82,6 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
 	{ "rx_long_byte_count", E1000_STAT(stats.gorcl) },
 	{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
 	{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
-	{ "rx_header_split", E1000_STAT(rx_hdr_split) },
 	{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
 	{ "tx_smbus", E1000_STAT(stats.mgptc) },
 	{ "rx_smbus", E1000_STAT(stats.mgprc) },
@@ -114,8 +113,6 @@ static int e1000_get_settings(struct net_device *netdev,
 		                   SUPPORTED_1000baseT_Full|
 		                   SUPPORTED_Autoneg |
 		                   SUPPORTED_TP);
-		if (hw->phy_type == e1000_phy_ife)
-			ecmd->supported &= ~SUPPORTED_1000baseT_Full;
 		ecmd->advertising = ADVERTISED_TP;
 
 		if (hw->autoneg == 1) {
@@ -178,14 +175,6 @@ static int e1000_set_settings(struct net_device *netdev,
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
-	/* When SoL/IDER sessions are active, autoneg/speed/duplex
-	 * cannot be changed */
-	if (e1000_check_phy_reset_block(hw)) {
-		DPRINTK(DRV, ERR, "Cannot change link characteristics "
-		        "when SoL/IDER is active.\n");
-		return -EINVAL;
-	}
-
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 		msleep(1);
 
@@ -330,10 +319,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
 	else
 		netdev->features &= ~NETIF_F_TSO;
 
-	if (data && (adapter->hw.mac_type > e1000_82547_rev_2))
-		netdev->features |= NETIF_F_TSO6;
-	else
-		netdev->features &= ~NETIF_F_TSO6;
+	netdev->features &= ~NETIF_F_TSO6;
 
 	DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
 	adapter->tso_force = true;
@@ -441,7 +427,6 @@ static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
 	regs_buff[24] = (u32)phy_data;  /* phy local receiver status */
 	regs_buff[25] = regs_buff[24];  /* phy remote receiver status */
 	if (hw->mac_type >= e1000_82540 &&
-	    hw->mac_type < e1000_82571 &&
 	    hw->media_type == e1000_media_type_copper) {
 		regs_buff[26] = er32(MANC);
 	}
@@ -554,10 +539,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
 	ret_val = e1000_write_eeprom(hw, first_word,
 				     last_word - first_word + 1, eeprom_buff);
 
-	/* Update the checksum over the first part of the EEPROM if needed
-	 * and flush shadow RAM for 82573 conrollers */
-	if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) ||
-				(hw->mac_type == e1000_82573)))
+	/* Update the checksum over the first part of the EEPROM if needed */
+	if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG))
 		e1000_update_eeprom_checksum(hw);
 
 	kfree(eeprom_buff);
@@ -568,31 +551,12 @@ static void e1000_get_drvinfo(struct net_device *netdev,
 			      struct ethtool_drvinfo *drvinfo)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
 	char firmware_version[32];
-	u16 eeprom_data;
 
 	strncpy(drvinfo->driver,  e1000_driver_name, 32);
 	strncpy(drvinfo->version, e1000_driver_version, 32);
 
-	/* EEPROM image version # is reported as firmware version # for
-	 * 8257{1|2|3} controllers */
-	e1000_read_eeprom(hw, 5, 1, &eeprom_data);
-	switch (hw->mac_type) {
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_82573:
-	case e1000_80003es2lan:
-	case e1000_ich8lan:
-		sprintf(firmware_version, "%d.%d-%d",
-			(eeprom_data & 0xF000) >> 12,
-			(eeprom_data & 0x0FF0) >> 4,
-			eeprom_data & 0x000F);
-		break;
-	default:
-		sprintf(firmware_version, "N/A");
-	}
-
+	sprintf(firmware_version, "N/A");
 	strncpy(drvinfo->fw_version, firmware_version, 32);
 	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
 	drvinfo->regdump_len = e1000_get_regs_len(netdev);
@@ -781,21 +745,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	/* The status register is Read Only, so a write should fail.
 	 * Some bits that get toggled are ignored.
 	 */
-	switch (hw->mac_type) {
+
 	/* there are several bits on newer hardware that are r/w */
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_80003es2lan:
-		toggle = 0x7FFFF3FF;
-		break;
-	case e1000_82573:
-	case e1000_ich8lan:
-		toggle = 0x7FFFF033;
-		break;
-	default:
-		toggle = 0xFFFFF833;
-		break;
-	}
+	toggle = 0xFFFFF833;
 
 	before = er32(STATUS);
 	value = (er32(STATUS) & toggle);
@@ -810,12 +762,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	/* restore previous status */
 	ew32(STATUS, before);
 
-	if (hw->mac_type != e1000_ich8lan) {
-		REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
-		REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
-		REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
-		REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
-	}
+	REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+	REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+	REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+	REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
 
 	REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
 	REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
@@ -830,8 +780,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 	REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
 
-	before = (hw->mac_type == e1000_ich8lan ?
-	          0x06C3B33E : 0x06DFB3FE);
+	before = 0x06DFB3FE;
 	REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
 	REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
 
@@ -839,12 +788,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 		REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
 		REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
-		if (hw->mac_type != e1000_ich8lan)
-			REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+		REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
 		REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 		REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
-		value = (hw->mac_type == e1000_ich8lan ?
-		         E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
+		value = E1000_RAR_ENTRIES;
 		for (i = 0; i < value; i++) {
 			REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
 			                 0xFFFFFFFF);
@@ -859,8 +806,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 	}
 
-	value = (hw->mac_type == e1000_ich8lan ?
-			E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
+	value = E1000_MC_TBL_SIZE;
 	for (i = 0; i < value; i++)
 		REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
 
@@ -933,9 +879,6 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 	/* Test each interrupt */
 	for (; i < 10; i++) {
 
-		if (hw->mac_type == e1000_ich8lan && i == 8)
-			continue;
-
 		/* Interrupt to test */
 		mask = 1 << i;
 
@@ -1289,35 +1232,20 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 		e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
 		/* autoneg off */
 		e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
-	} else if (hw->phy_type == e1000_phy_gg82563)
-		e1000_write_phy_reg(hw,
-		                    GG82563_PHY_KMRN_MODE_CTRL,
-		                    0x1CC);
+	}
 
 	ctrl_reg = er32(CTRL);
 
-	if (hw->phy_type == e1000_phy_ife) {
-		/* force 100, set loopback */
-		e1000_write_phy_reg(hw, PHY_CTRL, 0x6100);
+	/* force 1000, set loopback */
+	e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
 
-		/* Now set up the MAC to the same speed/duplex as the PHY. */
-		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
-			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
-			     E1000_CTRL_SPD_100 |/* Force Speed to 100 */
-			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
-	} else {
-		/* force 1000, set loopback */
-		e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
-
-		/* Now set up the MAC to the same speed/duplex as the PHY. */
-		ctrl_reg = er32(CTRL);
-		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
-			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
-			     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
-			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
-	}
+	/* Now set up the MAC to the same speed/duplex as the PHY. */
+	ctrl_reg = er32(CTRL);
+	ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+	ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+			E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+			E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+			E1000_CTRL_FD);	 /* Force Duplex to FULL */
 
 	if (hw->media_type == e1000_media_type_copper &&
 	   hw->phy_type == e1000_phy_m88)
@@ -1373,14 +1301,8 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
 	case e1000_82541_rev_2:
 	case e1000_82547:
 	case e1000_82547_rev_2:
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_82573:
-	case e1000_80003es2lan:
-	case e1000_ich8lan:
 		return e1000_integrated_phy_loopback(adapter);
 		break;
-
 	default:
 		/* Default PHY loopback work is to read the MII
 		 * control register and assert bit 14 (loopback mode).
@@ -1409,14 +1331,6 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
 		case e1000_82546_rev_3:
 			return e1000_set_phy_loopback(adapter);
 			break;
-		case e1000_82571:
-		case e1000_82572:
-#define E1000_SERDES_LB_ON 0x410
-			e1000_set_phy_loopback(adapter);
-			ew32(SCTL, E1000_SERDES_LB_ON);
-			msleep(10);
-			return 0;
-			break;
 		default:
 			rctl = er32(RCTL);
 			rctl |= E1000_RCTL_LBM_TCVR;
@@ -1440,26 +1354,12 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 	ew32(RCTL, rctl);
 
 	switch (hw->mac_type) {
-	case e1000_82571:
-	case e1000_82572:
-		if (hw->media_type == e1000_media_type_fiber ||
-		    hw->media_type == e1000_media_type_internal_serdes) {
-#define E1000_SERDES_LB_OFF 0x400
-			ew32(SCTL, E1000_SERDES_LB_OFF);
-			msleep(10);
-			break;
-		}
-		/* Fall Through */
 	case e1000_82545:
 	case e1000_82546:
 	case e1000_82545_rev_3:
 	case e1000_82546_rev_3:
 	default:
 		hw->autoneg = true;
-		if (hw->phy_type == e1000_phy_gg82563)
-			e1000_write_phy_reg(hw,
-					    GG82563_PHY_KMRN_MODE_CTRL,
-					    0x180);
 		e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
 		if (phy_reg & MII_CR_LOOPBACK) {
 			phy_reg &= ~MII_CR_LOOPBACK;
@@ -1560,17 +1460,6 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 
 static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
 {
-	struct e1000_hw *hw = &adapter->hw;
-
-	/* PHY loopback cannot be performed if SoL/IDER
-	 * sessions are active */
-	if (e1000_check_phy_reset_block(hw)) {
-		DPRINTK(DRV, ERR, "Cannot do PHY loopback test "
-		        "when SoL/IDER is active.\n");
-		*data = 0;
-		goto out;
-	}
-
 	*data = e1000_setup_desc_rings(adapter);
 	if (*data)
 		goto out;
@@ -1592,13 +1481,13 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
 	*data = 0;
 	if (hw->media_type == e1000_media_type_internal_serdes) {
 		int i = 0;
-		hw->serdes_link_down = true;
+		hw->serdes_has_link = false;
 
 		/* On some blade server designs, link establishment
 		 * could take as long as 2-3 minutes */
 		do {
 			e1000_check_for_link(hw);
-			if (!hw->serdes_link_down)
+			if (hw->serdes_has_link)
 				return *data;
 			msleep(20);
 		} while (i++ < 3750);
@@ -1716,15 +1605,11 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter,
 	case E1000_DEV_ID_82545EM_COPPER:
 	case E1000_DEV_ID_82546GB_QUAD_COPPER:
 	case E1000_DEV_ID_82546GB_PCIE:
-	case E1000_DEV_ID_82571EB_SERDES_QUAD:
 		/* these don't support WoL at all */
 		wol->supported = 0;
 		break;
 	case E1000_DEV_ID_82546EB_FIBER:
 	case E1000_DEV_ID_82546GB_FIBER:
-	case E1000_DEV_ID_82571EB_FIBER:
-	case E1000_DEV_ID_82571EB_SERDES:
-	case E1000_DEV_ID_82571EB_COPPER:
 		/* Wake events not supported on port B */
 		if (er32(STATUS) & E1000_STATUS_FUNC_1) {
 			wol->supported = 0;
@@ -1733,10 +1618,6 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter,
 		/* return success for non excluded adapter ports */
 		retval = 0;
 		break;
-	case E1000_DEV_ID_82571EB_QUAD_COPPER:
-	case E1000_DEV_ID_82571EB_QUAD_FIBER:
-	case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
-	case E1000_DEV_ID_82571PT_QUAD_COPPER:
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
 		/* quad port adapters only support WoL on port A */
 		if (!adapter->quad_port_a) {
@@ -1872,30 +1753,15 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 	if (!data)
 		data = INT_MAX;
 
-	if (hw->mac_type < e1000_82571) {
-		if (!adapter->blink_timer.function) {
-			init_timer(&adapter->blink_timer);
-			adapter->blink_timer.function = e1000_led_blink_callback;
-			adapter->blink_timer.data = (unsigned long)adapter;
-		}
-		e1000_setup_led(hw);
-		mod_timer(&adapter->blink_timer, jiffies);
-		msleep_interruptible(data * 1000);
-		del_timer_sync(&adapter->blink_timer);
-	} else if (hw->phy_type == e1000_phy_ife) {
-		if (!adapter->blink_timer.function) {
-			init_timer(&adapter->blink_timer);
-			adapter->blink_timer.function = e1000_led_blink_callback;
-			adapter->blink_timer.data = (unsigned long)adapter;
-		}
-		mod_timer(&adapter->blink_timer, jiffies);
-		msleep_interruptible(data * 1000);
-		del_timer_sync(&adapter->blink_timer);
-		e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
-	} else {
-		e1000_blink_led_start(hw);
-		msleep_interruptible(data * 1000);
+	if (!adapter->blink_timer.function) {
+		init_timer(&adapter->blink_timer);
+		adapter->blink_timer.function = e1000_led_blink_callback;
+		adapter->blink_timer.data = (unsigned long)adapter;
 	}
+	e1000_setup_led(hw);
+	mod_timer(&adapter->blink_timer, jiffies);
+	msleep_interruptible(data * 1000);
+	del_timer_sync(&adapter->blink_timer);
 
 	e1000_led_off(hw);
 	clear_bit(E1000_LED_ON, &adapter->led_status);
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 45ac225a7aaa..8d7d87f12827 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -24,88 +24,34 @@
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
-*******************************************************************************/
+ */
 
 /* e1000_hw.c
  * Shared functions for accessing and configuring the MAC
  */
 
-
 #include "e1000_hw.h"
 
-static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask);
-static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask);
-static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data);
-static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
-static s32 e1000_get_software_semaphore(struct e1000_hw *hw);
-static void e1000_release_software_semaphore(struct e1000_hw *hw);
-
-static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw);
 static s32 e1000_check_downshift(struct e1000_hw *hw);
 static s32 e1000_check_polarity(struct e1000_hw *hw,
 				e1000_rev_polarity *polarity);
 static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
 static void e1000_clear_vfta(struct e1000_hw *hw);
-static s32 e1000_commit_shadow_ram(struct e1000_hw *hw);
 static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
 					      bool link_up);
 static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
 static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
-static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank);
 static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
 static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
 				  u16 *max_length);
-static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
 static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
-static s32 e1000_get_software_flag(struct e1000_hw *hw);
-static s32 e1000_ich8_cycle_init(struct e1000_hw *hw);
-static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout);
 static s32 e1000_id_led_init(struct e1000_hw *hw);
-static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
-						 u32 cnf_base_addr,
-						 u32 cnf_size);
-static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw);
 static void e1000_init_rx_addrs(struct e1000_hw *hw);
-static void e1000_initialize_hardware_bits(struct e1000_hw *hw);
-static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
-static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
-static s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
-static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
-				   u16 offset, u8 *sum);
-static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw,
-				      struct e1000_host_mng_command_header
-				      *hdr);
-static s32 e1000_mng_write_commit(struct e1000_hw *hw);
-static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
-				  struct e1000_phy_info *phy_info);
 static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
 				  struct e1000_phy_info *phy_info);
-static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
-				  u16 *data);
-static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
-				   u16 *data);
-static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
 static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
 				  struct e1000_phy_info *phy_info);
-static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
-static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data);
-static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index,
-					u8 byte);
-static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
-static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data);
-static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
-				u16 *data);
-static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
-				 u16 data);
-static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
-				  u16 *data);
-static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
-				   u16 *data);
-static void e1000_release_software_flag(struct e1000_hw *hw);
 static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
-static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop);
-static void e1000_set_pci_express_master_disable(struct e1000_hw *hw);
 static s32 e1000_wait_autoneg(struct e1000_hw *hw);
 static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
 static s32 e1000_set_phy_type(struct e1000_hw *hw);
@@ -117,12 +63,11 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
 static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
 static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
 static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
-static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data,
-				     u16 count);
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count);
 static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
 static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
 static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
-                                      u16 words, u16 *data);
+				  u16 words, u16 *data);
 static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
 					u16 words, u16 *data);
 static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
@@ -131,7 +76,7 @@ static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
 static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count);
 static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
 				  u16 phy_data);
-static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr,
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
 				 u16 *phy_data);
 static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
 static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
@@ -140,188 +85,164 @@ static void e1000_standby_eeprom(struct e1000_hw *hw);
 static s32 e1000_set_vco_speed(struct e1000_hw *hw);
 static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
 static s32 e1000_set_phy_mode(struct e1000_hw *hw);
-static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer);
-static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
-static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
-static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
-static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+				u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+				 u16 *data);
 
 /* IGP cable length table */
 static const
-u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
-    { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
-      5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
-      25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
-      40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
-      60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
-      90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100,
-      100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
-      110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120};
-
-static const
-u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
-    { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
-      0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
-      6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
-      21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
-      40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
-      60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
-      83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
-      104, 109, 114, 118, 121, 124};
+u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = {
+	5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+	5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
+	25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
+	40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
+	60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
+	90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100,
+	    100,
+	100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
+	    110, 110,
+	110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120,
+	    120, 120
+};
 
 static DEFINE_SPINLOCK(e1000_eeprom_lock);
 
-/******************************************************************************
- * Set the phy type member in the hw struct.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_set_phy_type - Set the phy type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
 static s32 e1000_set_phy_type(struct e1000_hw *hw)
 {
-    DEBUGFUNC("e1000_set_phy_type");
-
-    if (hw->mac_type == e1000_undefined)
-        return -E1000_ERR_PHY_TYPE;
-
-    switch (hw->phy_id) {
-    case M88E1000_E_PHY_ID:
-    case M88E1000_I_PHY_ID:
-    case M88E1011_I_PHY_ID:
-    case M88E1111_I_PHY_ID:
-        hw->phy_type = e1000_phy_m88;
-        break;
-    case IGP01E1000_I_PHY_ID:
-        if (hw->mac_type == e1000_82541 ||
-            hw->mac_type == e1000_82541_rev_2 ||
-            hw->mac_type == e1000_82547 ||
-            hw->mac_type == e1000_82547_rev_2) {
-            hw->phy_type = e1000_phy_igp;
-            break;
-        }
-    case IGP03E1000_E_PHY_ID:
-        hw->phy_type = e1000_phy_igp_3;
-        break;
-    case IFE_E_PHY_ID:
-    case IFE_PLUS_E_PHY_ID:
-    case IFE_C_E_PHY_ID:
-        hw->phy_type = e1000_phy_ife;
-        break;
-    case GG82563_E_PHY_ID:
-        if (hw->mac_type == e1000_80003es2lan) {
-            hw->phy_type = e1000_phy_gg82563;
-            break;
-        }
-        /* Fall Through */
-    default:
-        /* Should never have loaded on this device */
-        hw->phy_type = e1000_phy_undefined;
-        return -E1000_ERR_PHY_TYPE;
-    }
-
-    return E1000_SUCCESS;
-}
-
-/******************************************************************************
- * IGP phy init script - initializes the GbE PHY
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void e1000_phy_init_script(struct e1000_hw *hw)
-{
-    u32 ret_val;
-    u16 phy_saved_data;
-
-    DEBUGFUNC("e1000_phy_init_script");
-
-    if (hw->phy_init_script) {
-        msleep(20);
-
-        /* Save off the current value of register 0x2F5B to be restored at
-         * the end of this routine. */
-        ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-
-        /* Disabled the PHY transmitter */
-        e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+	DEBUGFUNC("e1000_set_phy_type");
 
-        msleep(20);
+	if (hw->mac_type == e1000_undefined)
+		return -E1000_ERR_PHY_TYPE;
 
-        e1000_write_phy_reg(hw,0x0000,0x0140);
-
-        msleep(5);
-
-        switch (hw->mac_type) {
-        case e1000_82541:
-        case e1000_82547:
-            e1000_write_phy_reg(hw, 0x1F95, 0x0001);
-
-            e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
-
-            e1000_write_phy_reg(hw, 0x1F79, 0x0018);
-
-            e1000_write_phy_reg(hw, 0x1F30, 0x1600);
-
-            e1000_write_phy_reg(hw, 0x1F31, 0x0014);
-
-            e1000_write_phy_reg(hw, 0x1F32, 0x161C);
-
-            e1000_write_phy_reg(hw, 0x1F94, 0x0003);
-
-            e1000_write_phy_reg(hw, 0x1F96, 0x003F);
-
-            e1000_write_phy_reg(hw, 0x2010, 0x0008);
-            break;
-
-        case e1000_82541_rev_2:
-        case e1000_82547_rev_2:
-            e1000_write_phy_reg(hw, 0x1F73, 0x0099);
-            break;
-        default:
-            break;
-        }
-
-        e1000_write_phy_reg(hw, 0x0000, 0x3300);
-
-        msleep(20);
-
-        /* Now enable the transmitter */
-        e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
-
-        if (hw->mac_type == e1000_82547) {
-            u16 fused, fine, coarse;
-
-            /* Move to analog registers page */
-            e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused);
-
-            if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
-                e1000_read_phy_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, &fused);
+	switch (hw->phy_id) {
+	case M88E1000_E_PHY_ID:
+	case M88E1000_I_PHY_ID:
+	case M88E1011_I_PHY_ID:
+	case M88E1111_I_PHY_ID:
+		hw->phy_type = e1000_phy_m88;
+		break;
+	case IGP01E1000_I_PHY_ID:
+		if (hw->mac_type == e1000_82541 ||
+		    hw->mac_type == e1000_82541_rev_2 ||
+		    hw->mac_type == e1000_82547 ||
+		    hw->mac_type == e1000_82547_rev_2) {
+			hw->phy_type = e1000_phy_igp;
+			break;
+		}
+	default:
+		/* Should never have loaded on this device */
+		hw->phy_type = e1000_phy_undefined;
+		return -E1000_ERR_PHY_TYPE;
+	}
 
-                fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
-                coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
+	return E1000_SUCCESS;
+}
 
-                if (coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
-                    coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10;
-                    fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
-                } else if (coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
-                    fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
+/**
+ * e1000_phy_init_script - IGP phy init script - initializes the GbE PHY
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_phy_init_script(struct e1000_hw *hw)
+{
+	u32 ret_val;
+	u16 phy_saved_data;
+
+	DEBUGFUNC("e1000_phy_init_script");
+
+	if (hw->phy_init_script) {
+		msleep(20);
+
+		/* Save off the current value of register 0x2F5B to be restored at
+		 * the end of this routine. */
+		ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+		/* Disabled the PHY transmitter */
+		e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+		msleep(20);
+
+		e1000_write_phy_reg(hw, 0x0000, 0x0140);
+		msleep(5);
+
+		switch (hw->mac_type) {
+		case e1000_82541:
+		case e1000_82547:
+			e1000_write_phy_reg(hw, 0x1F95, 0x0001);
+			e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
+			e1000_write_phy_reg(hw, 0x1F79, 0x0018);
+			e1000_write_phy_reg(hw, 0x1F30, 0x1600);
+			e1000_write_phy_reg(hw, 0x1F31, 0x0014);
+			e1000_write_phy_reg(hw, 0x1F32, 0x161C);
+			e1000_write_phy_reg(hw, 0x1F94, 0x0003);
+			e1000_write_phy_reg(hw, 0x1F96, 0x003F);
+			e1000_write_phy_reg(hw, 0x2010, 0x0008);
+			break;
 
-                fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
-                        (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
-                        (coarse & IGP01E1000_ANALOG_FUSE_COARSE_MASK);
+		case e1000_82541_rev_2:
+		case e1000_82547_rev_2:
+			e1000_write_phy_reg(hw, 0x1F73, 0x0099);
+			break;
+		default:
+			break;
+		}
 
-                e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_CONTROL, fused);
-                e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_BYPASS,
-                                    IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
-            }
-        }
-    }
+		e1000_write_phy_reg(hw, 0x0000, 0x3300);
+		msleep(20);
+
+		/* Now enable the transmitter */
+		e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+		if (hw->mac_type == e1000_82547) {
+			u16 fused, fine, coarse;
+
+			/* Move to analog registers page */
+			e1000_read_phy_reg(hw,
+					   IGP01E1000_ANALOG_SPARE_FUSE_STATUS,
+					   &fused);
+
+			if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
+				e1000_read_phy_reg(hw,
+						   IGP01E1000_ANALOG_FUSE_STATUS,
+						   &fused);
+
+				fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
+				coarse =
+				    fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
+
+				if (coarse >
+				    IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
+					coarse -=
+					    IGP01E1000_ANALOG_FUSE_COARSE_10;
+					fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
+				} else if (coarse ==
+					   IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
+					fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
+
+				fused =
+				    (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
+				    (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
+				    (coarse &
+				     IGP01E1000_ANALOG_FUSE_COARSE_MASK);
+
+				e1000_write_phy_reg(hw,
+						    IGP01E1000_ANALOG_FUSE_CONTROL,
+						    fused);
+				e1000_write_phy_reg(hw,
+						    IGP01E1000_ANALOG_FUSE_BYPASS,
+						    IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
+			}
+		}
+	}
 }
 
-/******************************************************************************
- * Set the mac type member in the hw struct.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_set_mac_type - Set the mac type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
 s32 e1000_set_mac_type(struct e1000_hw *hw)
 {
 	DEBUGFUNC("e1000_set_mac_type");
@@ -397,61 +318,12 @@ s32 e1000_set_mac_type(struct e1000_hw *hw)
 	case E1000_DEV_ID_82547GI:
 		hw->mac_type = e1000_82547_rev_2;
 		break;
-	case E1000_DEV_ID_82571EB_COPPER:
-	case E1000_DEV_ID_82571EB_FIBER:
-	case E1000_DEV_ID_82571EB_SERDES:
-	case E1000_DEV_ID_82571EB_SERDES_DUAL:
-	case E1000_DEV_ID_82571EB_SERDES_QUAD:
-	case E1000_DEV_ID_82571EB_QUAD_COPPER:
-	case E1000_DEV_ID_82571PT_QUAD_COPPER:
-	case E1000_DEV_ID_82571EB_QUAD_FIBER:
-	case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
-		hw->mac_type = e1000_82571;
-		break;
-	case E1000_DEV_ID_82572EI_COPPER:
-	case E1000_DEV_ID_82572EI_FIBER:
-	case E1000_DEV_ID_82572EI_SERDES:
-	case E1000_DEV_ID_82572EI:
-		hw->mac_type = e1000_82572;
-		break;
-	case E1000_DEV_ID_82573E:
-	case E1000_DEV_ID_82573E_IAMT:
-	case E1000_DEV_ID_82573L:
-		hw->mac_type = e1000_82573;
-		break;
-	case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
-	case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
-	case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
-	case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
-		hw->mac_type = e1000_80003es2lan;
-		break;
-	case E1000_DEV_ID_ICH8_IGP_M_AMT:
-	case E1000_DEV_ID_ICH8_IGP_AMT:
-	case E1000_DEV_ID_ICH8_IGP_C:
-	case E1000_DEV_ID_ICH8_IFE:
-	case E1000_DEV_ID_ICH8_IFE_GT:
-	case E1000_DEV_ID_ICH8_IFE_G:
-	case E1000_DEV_ID_ICH8_IGP_M:
-		hw->mac_type = e1000_ich8lan;
-		break;
 	default:
 		/* Should never have loaded on this device */
 		return -E1000_ERR_MAC_TYPE;
 	}
 
 	switch (hw->mac_type) {
-	case e1000_ich8lan:
-		hw->swfwhw_semaphore_present = true;
-		hw->asf_firmware_present = true;
-		break;
-	case e1000_80003es2lan:
-		hw->swfw_sync_present = true;
-		/* fall through */
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_82573:
-		hw->eeprom_semaphore_present = true;
-		/* fall through */
 	case e1000_82541:
 	case e1000_82547:
 	case e1000_82541_rev_2:
@@ -468,6058 +340,4500 @@ s32 e1000_set_mac_type(struct e1000_hw *hw)
 	if (hw->mac_type == e1000_82543)
 		hw->bad_tx_carr_stats_fd = true;
 
-	/* capable of receiving management packets to the host */
-	if (hw->mac_type >= e1000_82571)
-		hw->has_manc2h = true;
-
-	/* In rare occasions, ESB2 systems would end up started without
-	 * the RX unit being turned on.
-	 */
-	if (hw->mac_type == e1000_80003es2lan)
-		hw->rx_needs_kicking = true;
-
 	if (hw->mac_type > e1000_82544)
 		hw->has_smbus = true;
 
 	return E1000_SUCCESS;
 }
 
-/*****************************************************************************
- * Set media type and TBI compatibility.
- *
- * hw - Struct containing variables accessed by shared code
- * **************************************************************************/
+/**
+ * e1000_set_media_type - Set media type and TBI compatibility.
+ * @hw: Struct containing variables accessed by shared code
+ */
 void e1000_set_media_type(struct e1000_hw *hw)
 {
-    u32 status;
-
-    DEBUGFUNC("e1000_set_media_type");
-
-    if (hw->mac_type != e1000_82543) {
-        /* tbi_compatibility is only valid on 82543 */
-        hw->tbi_compatibility_en = false;
-    }
-
-    switch (hw->device_id) {
-    case E1000_DEV_ID_82545GM_SERDES:
-    case E1000_DEV_ID_82546GB_SERDES:
-    case E1000_DEV_ID_82571EB_SERDES:
-    case E1000_DEV_ID_82571EB_SERDES_DUAL:
-    case E1000_DEV_ID_82571EB_SERDES_QUAD:
-    case E1000_DEV_ID_82572EI_SERDES:
-    case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
-        hw->media_type = e1000_media_type_internal_serdes;
-        break;
-    default:
-        switch (hw->mac_type) {
-        case e1000_82542_rev2_0:
-        case e1000_82542_rev2_1:
-            hw->media_type = e1000_media_type_fiber;
-            break;
-        case e1000_ich8lan:
-        case e1000_82573:
-            /* The STATUS_TBIMODE bit is reserved or reused for the this
-             * device.
-             */
-            hw->media_type = e1000_media_type_copper;
-            break;
-        default:
-            status = er32(STATUS);
-            if (status & E1000_STATUS_TBIMODE) {
-                hw->media_type = e1000_media_type_fiber;
-                /* tbi_compatibility not valid on fiber */
-                hw->tbi_compatibility_en = false;
-            } else {
-                hw->media_type = e1000_media_type_copper;
-            }
-            break;
-        }
-    }
+	u32 status;
+
+	DEBUGFUNC("e1000_set_media_type");
+
+	if (hw->mac_type != e1000_82543) {
+		/* tbi_compatibility is only valid on 82543 */
+		hw->tbi_compatibility_en = false;
+	}
+
+	switch (hw->device_id) {
+	case E1000_DEV_ID_82545GM_SERDES:
+	case E1000_DEV_ID_82546GB_SERDES:
+		hw->media_type = e1000_media_type_internal_serdes;
+		break;
+	default:
+		switch (hw->mac_type) {
+		case e1000_82542_rev2_0:
+		case e1000_82542_rev2_1:
+			hw->media_type = e1000_media_type_fiber;
+			break;
+		default:
+			status = er32(STATUS);
+			if (status & E1000_STATUS_TBIMODE) {
+				hw->media_type = e1000_media_type_fiber;
+				/* tbi_compatibility not valid on fiber */
+				hw->tbi_compatibility_en = false;
+			} else {
+				hw->media_type = e1000_media_type_copper;
+			}
+			break;
+		}
+	}
 }
 
-/******************************************************************************
- * Reset the transmit and receive units; mask and clear all interrupts.
+/**
+ * e1000_reset_hw: reset the hardware completely
+ * @hw: Struct containing variables accessed by shared code
  *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ */
 s32 e1000_reset_hw(struct e1000_hw *hw)
 {
-    u32 ctrl;
-    u32 ctrl_ext;
-    u32 icr;
-    u32 manc;
-    u32 led_ctrl;
-    u32 timeout;
-    u32 extcnf_ctrl;
-    s32 ret_val;
-
-    DEBUGFUNC("e1000_reset_hw");
-
-    /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
-    if (hw->mac_type == e1000_82542_rev2_0) {
-        DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
-        e1000_pci_clear_mwi(hw);
-    }
-
-    if (hw->bus_type == e1000_bus_type_pci_express) {
-        /* Prevent the PCI-E bus from sticking if there is no TLP connection
-         * on the last TLP read/write transaction when MAC is reset.
-         */
-        if (e1000_disable_pciex_master(hw) != E1000_SUCCESS) {
-            DEBUGOUT("PCI-E Master disable polling has failed.\n");
-        }
-    }
-
-    /* Clear interrupt mask to stop board from generating interrupts */
-    DEBUGOUT("Masking off all interrupts\n");
-    ew32(IMC, 0xffffffff);
-
-    /* Disable the Transmit and Receive units.  Then delay to allow
-     * any pending transactions to complete before we hit the MAC with
-     * the global reset.
-     */
-    ew32(RCTL, 0);
-    ew32(TCTL, E1000_TCTL_PSP);
-    E1000_WRITE_FLUSH();
-
-    /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
-    hw->tbi_compatibility_on = false;
-
-    /* Delay to allow any outstanding PCI transactions to complete before
-     * resetting the device
-     */
-    msleep(10);
-
-    ctrl = er32(CTRL);
-
-    /* Must reset the PHY before resetting the MAC */
-    if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
-        ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
-        msleep(5);
-    }
-
-    /* Must acquire the MDIO ownership before MAC reset.
-     * Ownership defaults to firmware after a reset. */
-    if (hw->mac_type == e1000_82573) {
-        timeout = 10;
-
-        extcnf_ctrl = er32(EXTCNF_CTRL);
-        extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
-
-        do {
-            ew32(EXTCNF_CTRL, extcnf_ctrl);
-            extcnf_ctrl = er32(EXTCNF_CTRL);
-
-            if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
-                break;
-            else
-                extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
-
-            msleep(2);
-            timeout--;
-        } while (timeout);
-    }
-
-    /* Workaround for ICH8 bit corruption issue in FIFO memory */
-    if (hw->mac_type == e1000_ich8lan) {
-        /* Set Tx and Rx buffer allocation to 8k apiece. */
-        ew32(PBA, E1000_PBA_8K);
-        /* Set Packet Buffer Size to 16k. */
-        ew32(PBS, E1000_PBS_16K);
-    }
-
-    /* Issue a global reset to the MAC.  This will reset the chip's
-     * transmit, receive, DMA, and link units.  It will not effect
-     * the current PCI configuration.  The global reset bit is self-
-     * clearing, and should clear within a microsecond.
-     */
-    DEBUGOUT("Issuing a global reset to MAC\n");
-
-    switch (hw->mac_type) {
-        case e1000_82544:
-        case e1000_82540:
-        case e1000_82545:
-        case e1000_82546:
-        case e1000_82541:
-        case e1000_82541_rev_2:
-            /* These controllers can't ack the 64-bit write when issuing the
-             * reset, so use IO-mapping as a workaround to issue the reset */
-            E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
-            break;
-        case e1000_82545_rev_3:
-        case e1000_82546_rev_3:
-            /* Reset is performed on a shadow of the control register */
-            ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
-            break;
-        case e1000_ich8lan:
-            if (!hw->phy_reset_disable &&
-                e1000_check_phy_reset_block(hw) == E1000_SUCCESS) {
-                /* e1000_ich8lan PHY HW reset requires MAC CORE reset
-                 * at the same time to make sure the interface between
-                 * MAC and the external PHY is reset.
-                 */
-                ctrl |= E1000_CTRL_PHY_RST;
-            }
-
-            e1000_get_software_flag(hw);
-            ew32(CTRL, (ctrl | E1000_CTRL_RST));
-            msleep(5);
-            break;
-        default:
-            ew32(CTRL, (ctrl | E1000_CTRL_RST));
-            break;
-    }
-
-    /* After MAC reset, force reload of EEPROM to restore power-on settings to
-     * device.  Later controllers reload the EEPROM automatically, so just wait
-     * for reload to complete.
-     */
-    switch (hw->mac_type) {
-        case e1000_82542_rev2_0:
-        case e1000_82542_rev2_1:
-        case e1000_82543:
-        case e1000_82544:
-            /* Wait for reset to complete */
-            udelay(10);
-            ctrl_ext = er32(CTRL_EXT);
-            ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-            ew32(CTRL_EXT, ctrl_ext);
-            E1000_WRITE_FLUSH();
-            /* Wait for EEPROM reload */
-            msleep(2);
-            break;
-        case e1000_82541:
-        case e1000_82541_rev_2:
-        case e1000_82547:
-        case e1000_82547_rev_2:
-            /* Wait for EEPROM reload */
-            msleep(20);
-            break;
-        case e1000_82573:
-            if (!e1000_is_onboard_nvm_eeprom(hw)) {
-                udelay(10);
-                ctrl_ext = er32(CTRL_EXT);
-                ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-                ew32(CTRL_EXT, ctrl_ext);
-                E1000_WRITE_FLUSH();
-            }
-            /* fall through */
-        default:
-            /* Auto read done will delay 5ms or poll based on mac type */
-            ret_val = e1000_get_auto_rd_done(hw);
-            if (ret_val)
-                return ret_val;
-            break;
-    }
-
-    /* Disable HW ARPs on ASF enabled adapters */
-    if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) {
-        manc = er32(MANC);
-        manc &= ~(E1000_MANC_ARP_EN);
-        ew32(MANC, manc);
-    }
-
-    if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
-        e1000_phy_init_script(hw);
-
-        /* Configure activity LED after PHY reset */
-        led_ctrl = er32(LEDCTL);
-        led_ctrl &= IGP_ACTIVITY_LED_MASK;
-        led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
-        ew32(LEDCTL, led_ctrl);
-    }
-
-    /* Clear interrupt mask to stop board from generating interrupts */
-    DEBUGOUT("Masking off all interrupts\n");
-    ew32(IMC, 0xffffffff);
-
-    /* Clear any pending interrupt events. */
-    icr = er32(ICR);
-
-    /* If MWI was previously enabled, reenable it. */
-    if (hw->mac_type == e1000_82542_rev2_0) {
-        if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
-            e1000_pci_set_mwi(hw);
-    }
-
-    if (hw->mac_type == e1000_ich8lan) {
-        u32 kab = er32(KABGTXD);
-        kab |= E1000_KABGTXD_BGSQLBIAS;
-        ew32(KABGTXD, kab);
-    }
-
-    return E1000_SUCCESS;
-}
+	u32 ctrl;
+	u32 ctrl_ext;
+	u32 icr;
+	u32 manc;
+	u32 led_ctrl;
+	s32 ret_val;
 
-/******************************************************************************
- *
- * Initialize a number of hardware-dependent bits
- *
- * hw: Struct containing variables accessed by shared code
- *
- * This function contains hardware limitation workarounds for PCI-E adapters
- *
- *****************************************************************************/
-static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
-{
-    if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) {
-        /* Settings common to all PCI-express silicon */
-        u32 reg_ctrl, reg_ctrl_ext;
-        u32 reg_tarc0, reg_tarc1;
-        u32 reg_tctl;
-        u32 reg_txdctl, reg_txdctl1;
-
-        /* link autonegotiation/sync workarounds */
-        reg_tarc0 = er32(TARC0);
-        reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27));
-
-        /* Enable not-done TX descriptor counting */
-        reg_txdctl = er32(TXDCTL);
-        reg_txdctl |= E1000_TXDCTL_COUNT_DESC;
-        ew32(TXDCTL, reg_txdctl);
-        reg_txdctl1 = er32(TXDCTL1);
-        reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC;
-        ew32(TXDCTL1, reg_txdctl1);
-
-        switch (hw->mac_type) {
-            case e1000_82571:
-            case e1000_82572:
-                /* Clear PHY TX compatible mode bits */
-                reg_tarc1 = er32(TARC1);
-                reg_tarc1 &= ~((1 << 30)|(1 << 29));
-
-                /* link autonegotiation/sync workarounds */
-                reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23));
-
-                /* TX ring control fixes */
-                reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24));
-
-                /* Multiple read bit is reversed polarity */
-                reg_tctl = er32(TCTL);
-                if (reg_tctl & E1000_TCTL_MULR)
-                    reg_tarc1 &= ~(1 << 28);
-                else
-                    reg_tarc1 |= (1 << 28);
-
-                ew32(TARC1, reg_tarc1);
-                break;
-            case e1000_82573:
-                reg_ctrl_ext = er32(CTRL_EXT);
-                reg_ctrl_ext &= ~(1 << 23);
-                reg_ctrl_ext |= (1 << 22);
-
-                /* TX byte count fix */
-                reg_ctrl = er32(CTRL);
-                reg_ctrl &= ~(1 << 29);
-
-                ew32(CTRL_EXT, reg_ctrl_ext);
-                ew32(CTRL, reg_ctrl);
-                break;
-            case e1000_80003es2lan:
-                /* improve small packet performace for fiber/serdes */
-                if ((hw->media_type == e1000_media_type_fiber) ||
-                    (hw->media_type == e1000_media_type_internal_serdes)) {
-                    reg_tarc0 &= ~(1 << 20);
-                }
-
-                /* Multiple read bit is reversed polarity */
-                reg_tctl = er32(TCTL);
-                reg_tarc1 = er32(TARC1);
-                if (reg_tctl & E1000_TCTL_MULR)
-                    reg_tarc1 &= ~(1 << 28);
-                else
-                    reg_tarc1 |= (1 << 28);
-
-                ew32(TARC1, reg_tarc1);
-                break;
-            case e1000_ich8lan:
-                /* Reduce concurrent DMA requests to 3 from 4 */
-                if ((hw->revision_id < 3) ||
-                    ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
-                     (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))
-                    reg_tarc0 |= ((1 << 29)|(1 << 28));
-
-                reg_ctrl_ext = er32(CTRL_EXT);
-                reg_ctrl_ext |= (1 << 22);
-                ew32(CTRL_EXT, reg_ctrl_ext);
-
-                /* workaround TX hang with TSO=on */
-                reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23));
-
-                /* Multiple read bit is reversed polarity */
-                reg_tctl = er32(TCTL);
-                reg_tarc1 = er32(TARC1);
-                if (reg_tctl & E1000_TCTL_MULR)
-                    reg_tarc1 &= ~(1 << 28);
-                else
-                    reg_tarc1 |= (1 << 28);
-
-                /* workaround TX hang with TSO=on */
-                reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24));
-
-                ew32(TARC1, reg_tarc1);
-                break;
-            default:
-                break;
-        }
-
-        ew32(TARC0, reg_tarc0);
-    }
+	DEBUGFUNC("e1000_reset_hw");
+
+	/* For 82542 (rev 2.0), disable MWI before issuing a device reset */
+	if (hw->mac_type == e1000_82542_rev2_0) {
+		DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+		e1000_pci_clear_mwi(hw);
+	}
+
+	/* Clear interrupt mask to stop board from generating interrupts */
+	DEBUGOUT("Masking off all interrupts\n");
+	ew32(IMC, 0xffffffff);
+
+	/* Disable the Transmit and Receive units.  Then delay to allow
+	 * any pending transactions to complete before we hit the MAC with
+	 * the global reset.
+	 */
+	ew32(RCTL, 0);
+	ew32(TCTL, E1000_TCTL_PSP);
+	E1000_WRITE_FLUSH();
+
+	/* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
+	hw->tbi_compatibility_on = false;
+
+	/* Delay to allow any outstanding PCI transactions to complete before
+	 * resetting the device
+	 */
+	msleep(10);
+
+	ctrl = er32(CTRL);
+
+	/* Must reset the PHY before resetting the MAC */
+	if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+		ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
+		msleep(5);
+	}
+
+	/* Issue a global reset to the MAC.  This will reset the chip's
+	 * transmit, receive, DMA, and link units.  It will not effect
+	 * the current PCI configuration.  The global reset bit is self-
+	 * clearing, and should clear within a microsecond.
+	 */
+	DEBUGOUT("Issuing a global reset to MAC\n");
+
+	switch (hw->mac_type) {
+	case e1000_82544:
+	case e1000_82540:
+	case e1000_82545:
+	case e1000_82546:
+	case e1000_82541:
+	case e1000_82541_rev_2:
+		/* These controllers can't ack the 64-bit write when issuing the
+		 * reset, so use IO-mapping as a workaround to issue the reset */
+		E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
+		break;
+	case e1000_82545_rev_3:
+	case e1000_82546_rev_3:
+		/* Reset is performed on a shadow of the control register */
+		ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
+		break;
+	default:
+		ew32(CTRL, (ctrl | E1000_CTRL_RST));
+		break;
+	}
+
+	/* After MAC reset, force reload of EEPROM to restore power-on settings to
+	 * device.  Later controllers reload the EEPROM automatically, so just wait
+	 * for reload to complete.
+	 */
+	switch (hw->mac_type) {
+	case e1000_82542_rev2_0:
+	case e1000_82542_rev2_1:
+	case e1000_82543:
+	case e1000_82544:
+		/* Wait for reset to complete */
+		udelay(10);
+		ctrl_ext = er32(CTRL_EXT);
+		ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+		ew32(CTRL_EXT, ctrl_ext);
+		E1000_WRITE_FLUSH();
+		/* Wait for EEPROM reload */
+		msleep(2);
+		break;
+	case e1000_82541:
+	case e1000_82541_rev_2:
+	case e1000_82547:
+	case e1000_82547_rev_2:
+		/* Wait for EEPROM reload */
+		msleep(20);
+		break;
+	default:
+		/* Auto read done will delay 5ms or poll based on mac type */
+		ret_val = e1000_get_auto_rd_done(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	}
+
+	/* Disable HW ARPs on ASF enabled adapters */
+	if (hw->mac_type >= e1000_82540) {
+		manc = er32(MANC);
+		manc &= ~(E1000_MANC_ARP_EN);
+		ew32(MANC, manc);
+	}
+
+	if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+		e1000_phy_init_script(hw);
+
+		/* Configure activity LED after PHY reset */
+		led_ctrl = er32(LEDCTL);
+		led_ctrl &= IGP_ACTIVITY_LED_MASK;
+		led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+		ew32(LEDCTL, led_ctrl);
+	}
+
+	/* Clear interrupt mask to stop board from generating interrupts */
+	DEBUGOUT("Masking off all interrupts\n");
+	ew32(IMC, 0xffffffff);
+
+	/* Clear any pending interrupt events. */
+	icr = er32(ICR);
+
+	/* If MWI was previously enabled, reenable it. */
+	if (hw->mac_type == e1000_82542_rev2_0) {
+		if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+			e1000_pci_set_mwi(hw);
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Performs basic configuration of the adapter.
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_init_hw: Performs basic configuration of the adapter.
+ * @hw: Struct containing variables accessed by shared code
  *
  * Assumes that the controller has previously been reset and is in a
  * post-reset uninitialized state. Initializes the receive address registers,
  * multicast table, and VLAN filter table. Calls routines to setup link
  * configuration and flow control settings. Clears all on-chip counters. Leaves
  * the transmit and receive units disabled and uninitialized.
- *****************************************************************************/
+ */
 s32 e1000_init_hw(struct e1000_hw *hw)
 {
-    u32 ctrl;
-    u32 i;
-    s32 ret_val;
-    u32 mta_size;
-    u32 reg_data;
-    u32 ctrl_ext;
-
-    DEBUGFUNC("e1000_init_hw");
-
-    /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */
-    if ((hw->mac_type == e1000_ich8lan) &&
-        ((hw->revision_id < 3) ||
-         ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
-          (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) {
-            reg_data = er32(STATUS);
-            reg_data &= ~0x80000000;
-            ew32(STATUS, reg_data);
-    }
-
-    /* Initialize Identification LED */
-    ret_val = e1000_id_led_init(hw);
-    if (ret_val) {
-        DEBUGOUT("Error Initializing Identification LED\n");
-        return ret_val;
-    }
-
-    /* Set the media type and TBI compatibility */
-    e1000_set_media_type(hw);
-
-    /* Must be called after e1000_set_media_type because media_type is used */
-    e1000_initialize_hardware_bits(hw);
-
-    /* Disabling VLAN filtering. */
-    DEBUGOUT("Initializing the IEEE VLAN\n");
-    /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
-    if (hw->mac_type != e1000_ich8lan) {
-        if (hw->mac_type < e1000_82545_rev_3)
-            ew32(VET, 0);
-        e1000_clear_vfta(hw);
-    }
-
-    /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
-    if (hw->mac_type == e1000_82542_rev2_0) {
-        DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
-        e1000_pci_clear_mwi(hw);
-        ew32(RCTL, E1000_RCTL_RST);
-        E1000_WRITE_FLUSH();
-        msleep(5);
-    }
-
-    /* Setup the receive address. This involves initializing all of the Receive
-     * Address Registers (RARs 0 - 15).
-     */
-    e1000_init_rx_addrs(hw);
-
-    /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
-    if (hw->mac_type == e1000_82542_rev2_0) {
-        ew32(RCTL, 0);
-        E1000_WRITE_FLUSH();
-        msleep(1);
-        if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
-            e1000_pci_set_mwi(hw);
-    }
-
-    /* Zero out the Multicast HASH table */
-    DEBUGOUT("Zeroing the MTA\n");
-    mta_size = E1000_MC_TBL_SIZE;
-    if (hw->mac_type == e1000_ich8lan)
-        mta_size = E1000_MC_TBL_SIZE_ICH8LAN;
-    for (i = 0; i < mta_size; i++) {
-        E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
-        /* use write flush to prevent Memory Write Block (MWB) from
-         * occuring when accessing our register space */
-        E1000_WRITE_FLUSH();
-    }
-
-    /* Set the PCI priority bit correctly in the CTRL register.  This
-     * determines if the adapter gives priority to receives, or if it
-     * gives equal priority to transmits and receives.  Valid only on
-     * 82542 and 82543 silicon.
-     */
-    if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
-        ctrl = er32(CTRL);
-        ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
-    }
-
-    switch (hw->mac_type) {
-    case e1000_82545_rev_3:
-    case e1000_82546_rev_3:
-        break;
-    default:
-        /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
-	if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048)
-		e1000_pcix_set_mmrbc(hw, 2048);
-	break;
-    }
-
-    /* More time needed for PHY to initialize */
-    if (hw->mac_type == e1000_ich8lan)
-        msleep(15);
-
-    /* Call a subroutine to configure the link and setup flow control. */
-    ret_val = e1000_setup_link(hw);
-
-    /* Set the transmit descriptor write-back policy */
-    if (hw->mac_type > e1000_82544) {
-        ctrl = er32(TXDCTL);
-        ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
-        ew32(TXDCTL, ctrl);
-    }
-
-    if (hw->mac_type == e1000_82573) {
-        e1000_enable_tx_pkt_filtering(hw);
-    }
-
-    switch (hw->mac_type) {
-    default:
-        break;
-    case e1000_80003es2lan:
-        /* Enable retransmit on late collisions */
-        reg_data = er32(TCTL);
-        reg_data |= E1000_TCTL_RTLC;
-        ew32(TCTL, reg_data);
-
-        /* Configure Gigabit Carry Extend Padding */
-        reg_data = er32(TCTL_EXT);
-        reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
-        reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX;
-        ew32(TCTL_EXT, reg_data);
-
-        /* Configure Transmit Inter-Packet Gap */
-        reg_data = er32(TIPG);
-        reg_data &= ~E1000_TIPG_IPGT_MASK;
-        reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
-        ew32(TIPG, reg_data);
-
-        reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001);
-        reg_data &= ~0x00100000;
-        E1000_WRITE_REG_ARRAY(hw, FFLT, 0x0001, reg_data);
-        /* Fall through */
-    case e1000_82571:
-    case e1000_82572:
-    case e1000_ich8lan:
-        ctrl = er32(TXDCTL1);
-        ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
-        ew32(TXDCTL1, ctrl);
-        break;
-    }
-
-
-    if (hw->mac_type == e1000_82573) {
-        u32 gcr = er32(GCR);
-        gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
-        ew32(GCR, gcr);
-    }
-
-    /* Clear all of the statistics registers (clear on read).  It is
-     * important that we do this after we have tried to establish link
-     * because the symbol error count will increment wildly if there
-     * is no link.
-     */
-    e1000_clear_hw_cntrs(hw);
-
-    /* ICH8 No-snoop bits are opposite polarity.
-     * Set to snoop by default after reset. */
-    if (hw->mac_type == e1000_ich8lan)
-        e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL);
-
-    if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
-        hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
-        ctrl_ext = er32(CTRL_EXT);
-        /* Relaxed ordering must be disabled to avoid a parity
-         * error crash in a PCI slot. */
-        ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
-        ew32(CTRL_EXT, ctrl_ext);
-    }
-
-    return ret_val;
+	u32 ctrl;
+	u32 i;
+	s32 ret_val;
+	u32 mta_size;
+	u32 ctrl_ext;
+
+	DEBUGFUNC("e1000_init_hw");
+
+	/* Initialize Identification LED */
+	ret_val = e1000_id_led_init(hw);
+	if (ret_val) {
+		DEBUGOUT("Error Initializing Identification LED\n");
+		return ret_val;
+	}
+
+	/* Set the media type and TBI compatibility */
+	e1000_set_media_type(hw);
+
+	/* Disabling VLAN filtering. */
+	DEBUGOUT("Initializing the IEEE VLAN\n");
+	if (hw->mac_type < e1000_82545_rev_3)
+		ew32(VET, 0);
+	e1000_clear_vfta(hw);
+
+	/* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
+	if (hw->mac_type == e1000_82542_rev2_0) {
+		DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+		e1000_pci_clear_mwi(hw);
+		ew32(RCTL, E1000_RCTL_RST);
+		E1000_WRITE_FLUSH();
+		msleep(5);
+	}
+
+	/* Setup the receive address. This involves initializing all of the Receive
+	 * Address Registers (RARs 0 - 15).
+	 */
+	e1000_init_rx_addrs(hw);
+
+	/* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
+	if (hw->mac_type == e1000_82542_rev2_0) {
+		ew32(RCTL, 0);
+		E1000_WRITE_FLUSH();
+		msleep(1);
+		if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+			e1000_pci_set_mwi(hw);
+	}
+
+	/* Zero out the Multicast HASH table */
+	DEBUGOUT("Zeroing the MTA\n");
+	mta_size = E1000_MC_TBL_SIZE;
+	for (i = 0; i < mta_size; i++) {
+		E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+		/* use write flush to prevent Memory Write Block (MWB) from
+		 * occurring when accessing our register space */
+		E1000_WRITE_FLUSH();
+	}
+
+	/* Set the PCI priority bit correctly in the CTRL register.  This
+	 * determines if the adapter gives priority to receives, or if it
+	 * gives equal priority to transmits and receives.  Valid only on
+	 * 82542 and 82543 silicon.
+	 */
+	if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
+		ctrl = er32(CTRL);
+		ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
+	}
+
+	switch (hw->mac_type) {
+	case e1000_82545_rev_3:
+	case e1000_82546_rev_3:
+		break;
+	default:
+		/* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
+		if (hw->bus_type == e1000_bus_type_pcix
+		    && e1000_pcix_get_mmrbc(hw) > 2048)
+			e1000_pcix_set_mmrbc(hw, 2048);
+		break;
+	}
+
+	/* Call a subroutine to configure the link and setup flow control. */
+	ret_val = e1000_setup_link(hw);
+
+	/* Set the transmit descriptor write-back policy */
+	if (hw->mac_type > e1000_82544) {
+		ctrl = er32(TXDCTL);
+		ctrl =
+		    (ctrl & ~E1000_TXDCTL_WTHRESH) |
+		    E1000_TXDCTL_FULL_TX_DESC_WB;
+		ew32(TXDCTL, ctrl);
+	}
+
+	/* Clear all of the statistics registers (clear on read).  It is
+	 * important that we do this after we have tried to establish link
+	 * because the symbol error count will increment wildly if there
+	 * is no link.
+	 */
+	e1000_clear_hw_cntrs(hw);
+
+	if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
+	    hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
+		ctrl_ext = er32(CTRL_EXT);
+		/* Relaxed ordering must be disabled to avoid a parity
+		 * error crash in a PCI slot. */
+		ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+		ew32(CTRL_EXT, ctrl_ext);
+	}
+
+	return ret_val;
 }
 
-/******************************************************************************
- * Adjust SERDES output amplitude based on EEPROM setting.
- *
- * hw - Struct containing variables accessed by shared code.
- *****************************************************************************/
+/**
+ * e1000_adjust_serdes_amplitude - Adjust SERDES output amplitude based on EEPROM setting.
+ * @hw: Struct containing variables accessed by shared code.
+ */
 static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
 {
-    u16 eeprom_data;
-    s32  ret_val;
-
-    DEBUGFUNC("e1000_adjust_serdes_amplitude");
-
-    if (hw->media_type != e1000_media_type_internal_serdes)
-        return E1000_SUCCESS;
-
-    switch (hw->mac_type) {
-    case e1000_82545_rev_3:
-    case e1000_82546_rev_3:
-        break;
-    default:
-        return E1000_SUCCESS;
-    }
-
-    ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1, &eeprom_data);
-    if (ret_val) {
-        return ret_val;
-    }
-
-    if (eeprom_data != EEPROM_RESERVED_WORD) {
-        /* Adjust SERDES output amplitude only. */
-        eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
-        ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
-        if (ret_val)
-            return ret_val;
-    }
-
-    return E1000_SUCCESS;
+	u16 eeprom_data;
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_adjust_serdes_amplitude");
+
+	if (hw->media_type != e1000_media_type_internal_serdes)
+		return E1000_SUCCESS;
+
+	switch (hw->mac_type) {
+	case e1000_82545_rev_3:
+	case e1000_82546_rev_3:
+		break;
+	default:
+		return E1000_SUCCESS;
+	}
+
+	ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
+	                            &eeprom_data);
+	if (ret_val) {
+		return ret_val;
+	}
+
+	if (eeprom_data != EEPROM_RESERVED_WORD) {
+		/* Adjust SERDES output amplitude only. */
+		eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
+		ret_val =
+		    e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Configures flow control and link settings.
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_setup_link - Configures flow control and link settings.
+ * @hw: Struct containing variables accessed by shared code
  *
- * Determines which flow control settings to use. Calls the apropriate media-
+ * Determines which flow control settings to use. Calls the appropriate media-
  * specific link configuration function. Configures the flow control settings.
  * Assuming the adapter has a valid link partner, a valid link should be
  * established. Assumes the hardware has previously been reset and the
  * transmitter and receiver are not enabled.
- *****************************************************************************/
+ */
 s32 e1000_setup_link(struct e1000_hw *hw)
 {
-    u32 ctrl_ext;
-    s32 ret_val;
-    u16 eeprom_data;
-
-    DEBUGFUNC("e1000_setup_link");
-
-    /* In the case of the phy reset being blocked, we already have a link.
-     * We do not have to set it up again. */
-    if (e1000_check_phy_reset_block(hw))
-        return E1000_SUCCESS;
-
-    /* Read and store word 0x0F of the EEPROM. This word contains bits
-     * that determine the hardware's default PAUSE (flow control) mode,
-     * a bit that determines whether the HW defaults to enabling or
-     * disabling auto-negotiation, and the direction of the
-     * SW defined pins. If there is no SW over-ride of the flow
-     * control setting, then the variable hw->fc will
-     * be initialized based on a value in the EEPROM.
-     */
-    if (hw->fc == E1000_FC_DEFAULT) {
-        switch (hw->mac_type) {
-        case e1000_ich8lan:
-        case e1000_82573:
-            hw->fc = E1000_FC_FULL;
-            break;
-        default:
-            ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
-                                        1, &eeprom_data);
-            if (ret_val) {
-                DEBUGOUT("EEPROM Read Error\n");
-                return -E1000_ERR_EEPROM;
-            }
-            if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
-                hw->fc = E1000_FC_NONE;
-            else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
-                    EEPROM_WORD0F_ASM_DIR)
-                hw->fc = E1000_FC_TX_PAUSE;
-            else
-                hw->fc = E1000_FC_FULL;
-            break;
-        }
-    }
-
-    /* We want to save off the original Flow Control configuration just
-     * in case we get disconnected and then reconnected into a different
-     * hub or switch with different Flow Control capabilities.
-     */
-    if (hw->mac_type == e1000_82542_rev2_0)
-        hw->fc &= (~E1000_FC_TX_PAUSE);
-
-    if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
-        hw->fc &= (~E1000_FC_RX_PAUSE);
-
-    hw->original_fc = hw->fc;
-
-    DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
-
-    /* Take the 4 bits from EEPROM word 0x0F that determine the initial
-     * polarity value for the SW controlled pins, and setup the
-     * Extended Device Control reg with that info.
-     * This is needed because one of the SW controlled pins is used for
-     * signal detection.  So this should be done before e1000_setup_pcs_link()
-     * or e1000_phy_setup() is called.
-     */
-    if (hw->mac_type == e1000_82543) {
-        ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
-                                    1, &eeprom_data);
-        if (ret_val) {
-            DEBUGOUT("EEPROM Read Error\n");
-            return -E1000_ERR_EEPROM;
-        }
-        ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
-                    SWDPIO__EXT_SHIFT);
-        ew32(CTRL_EXT, ctrl_ext);
-    }
-
-    /* Call the necessary subroutine to configure the link. */
-    ret_val = (hw->media_type == e1000_media_type_copper) ?
-              e1000_setup_copper_link(hw) :
-              e1000_setup_fiber_serdes_link(hw);
-
-    /* Initialize the flow control address, type, and PAUSE timer
-     * registers to their default values.  This is done even if flow
-     * control is disabled, because it does not hurt anything to
-     * initialize these registers.
-     */
-    DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
-
-    /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */
-    if (hw->mac_type != e1000_ich8lan) {
-        ew32(FCT, FLOW_CONTROL_TYPE);
-        ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
-        ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
-    }
-
-    ew32(FCTTV, hw->fc_pause_time);
-
-    /* Set the flow control receive threshold registers.  Normally,
-     * these registers will be set to a default threshold that may be
-     * adjusted later by the driver's runtime code.  However, if the
-     * ability to transmit pause frames in not enabled, then these
-     * registers will be set to 0.
-     */
-    if (!(hw->fc & E1000_FC_TX_PAUSE)) {
-        ew32(FCRTL, 0);
-        ew32(FCRTH, 0);
-    } else {
-        /* We need to set up the Receive Threshold high and low water marks
-         * as well as (optionally) enabling the transmission of XON frames.
-         */
-        if (hw->fc_send_xon) {
-            ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
-            ew32(FCRTH, hw->fc_high_water);
-        } else {
-            ew32(FCRTL, hw->fc_low_water);
-            ew32(FCRTH, hw->fc_high_water);
-        }
-    }
-    return ret_val;
+	u32 ctrl_ext;
+	s32 ret_val;
+	u16 eeprom_data;
+
+	DEBUGFUNC("e1000_setup_link");
+
+	/* Read and store word 0x0F of the EEPROM. This word contains bits
+	 * that determine the hardware's default PAUSE (flow control) mode,
+	 * a bit that determines whether the HW defaults to enabling or
+	 * disabling auto-negotiation, and the direction of the
+	 * SW defined pins. If there is no SW over-ride of the flow
+	 * control setting, then the variable hw->fc will
+	 * be initialized based on a value in the EEPROM.
+	 */
+	if (hw->fc == E1000_FC_DEFAULT) {
+		ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+					    1, &eeprom_data);
+		if (ret_val) {
+			DEBUGOUT("EEPROM Read Error\n");
+			return -E1000_ERR_EEPROM;
+		}
+		if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+			hw->fc = E1000_FC_NONE;
+		else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+			 EEPROM_WORD0F_ASM_DIR)
+			hw->fc = E1000_FC_TX_PAUSE;
+		else
+			hw->fc = E1000_FC_FULL;
+	}
+
+	/* We want to save off the original Flow Control configuration just
+	 * in case we get disconnected and then reconnected into a different
+	 * hub or switch with different Flow Control capabilities.
+	 */
+	if (hw->mac_type == e1000_82542_rev2_0)
+		hw->fc &= (~E1000_FC_TX_PAUSE);
+
+	if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
+		hw->fc &= (~E1000_FC_RX_PAUSE);
+
+	hw->original_fc = hw->fc;
+
+	DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
+
+	/* Take the 4 bits from EEPROM word 0x0F that determine the initial
+	 * polarity value for the SW controlled pins, and setup the
+	 * Extended Device Control reg with that info.
+	 * This is needed because one of the SW controlled pins is used for
+	 * signal detection.  So this should be done before e1000_setup_pcs_link()
+	 * or e1000_phy_setup() is called.
+	 */
+	if (hw->mac_type == e1000_82543) {
+		ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+					    1, &eeprom_data);
+		if (ret_val) {
+			DEBUGOUT("EEPROM Read Error\n");
+			return -E1000_ERR_EEPROM;
+		}
+		ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
+			    SWDPIO__EXT_SHIFT);
+		ew32(CTRL_EXT, ctrl_ext);
+	}
+
+	/* Call the necessary subroutine to configure the link. */
+	ret_val = (hw->media_type == e1000_media_type_copper) ?
+	    e1000_setup_copper_link(hw) : e1000_setup_fiber_serdes_link(hw);
+
+	/* Initialize the flow control address, type, and PAUSE timer
+	 * registers to their default values.  This is done even if flow
+	 * control is disabled, because it does not hurt anything to
+	 * initialize these registers.
+	 */
+	DEBUGOUT
+	    ("Initializing the Flow Control address, type and timer regs\n");
+
+	ew32(FCT, FLOW_CONTROL_TYPE);
+	ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+	ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+	ew32(FCTTV, hw->fc_pause_time);
+
+	/* Set the flow control receive threshold registers.  Normally,
+	 * these registers will be set to a default threshold that may be
+	 * adjusted later by the driver's runtime code.  However, if the
+	 * ability to transmit pause frames in not enabled, then these
+	 * registers will be set to 0.
+	 */
+	if (!(hw->fc & E1000_FC_TX_PAUSE)) {
+		ew32(FCRTL, 0);
+		ew32(FCRTH, 0);
+	} else {
+		/* We need to set up the Receive Threshold high and low water marks
+		 * as well as (optionally) enabling the transmission of XON frames.
+		 */
+		if (hw->fc_send_xon) {
+			ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
+			ew32(FCRTH, hw->fc_high_water);
+		} else {
+			ew32(FCRTL, hw->fc_low_water);
+			ew32(FCRTH, hw->fc_high_water);
+		}
+	}
+	return ret_val;
 }
 
-/******************************************************************************
- * Sets up link for a fiber based or serdes based adapter
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_setup_fiber_serdes_link - prepare fiber or serdes link
+ * @hw: Struct containing variables accessed by shared code
  *
  * Manipulates Physical Coding Sublayer functions in order to configure
  * link. Assumes the hardware has been previously reset and the transmitter
  * and receiver are not enabled.
- *****************************************************************************/
+ */
 static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 {
-    u32 ctrl;
-    u32 status;
-    u32 txcw = 0;
-    u32 i;
-    u32 signal = 0;
-    s32 ret_val;
-
-    DEBUGFUNC("e1000_setup_fiber_serdes_link");
-
-    /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists
-     * until explicitly turned off or a power cycle is performed.  A read to
-     * the register does not indicate its status.  Therefore, we ensure
-     * loopback mode is disabled during initialization.
-     */
-    if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572)
-        ew32(SCTL, E1000_DISABLE_SERDES_LOOPBACK);
-
-    /* On adapters with a MAC newer than 82544, SWDP 1 will be
-     * set when the optics detect a signal. On older adapters, it will be
-     * cleared when there is a signal.  This applies to fiber media only.
-     * If we're on serdes media, adjust the output amplitude to value
-     * set in the EEPROM.
-     */
-    ctrl = er32(CTRL);
-    if (hw->media_type == e1000_media_type_fiber)
-        signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
-
-    ret_val = e1000_adjust_serdes_amplitude(hw);
-    if (ret_val)
-        return ret_val;
-
-    /* Take the link out of reset */
-    ctrl &= ~(E1000_CTRL_LRST);
-
-    /* Adjust VCO speed to improve BER performance */
-    ret_val = e1000_set_vco_speed(hw);
-    if (ret_val)
-        return ret_val;
-
-    e1000_config_collision_dist(hw);
-
-    /* Check for a software override of the flow control settings, and setup
-     * the device accordingly.  If auto-negotiation is enabled, then software
-     * will have to set the "PAUSE" bits to the correct value in the Tranmsit
-     * Config Word Register (TXCW) and re-start auto-negotiation.  However, if
-     * auto-negotiation is disabled, then software will have to manually
-     * configure the two flow control enable bits in the CTRL register.
-     *
-     * The possible values of the "fc" parameter are:
-     *      0:  Flow control is completely disabled
-     *      1:  Rx flow control is enabled (we can receive pause frames, but
-     *          not send pause frames).
-     *      2:  Tx flow control is enabled (we can send pause frames but we do
-     *          not support receiving pause frames).
-     *      3:  Both Rx and TX flow control (symmetric) are enabled.
-     */
-    switch (hw->fc) {
-    case E1000_FC_NONE:
-        /* Flow control is completely disabled by a software over-ride. */
-        txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
-        break;
-    case E1000_FC_RX_PAUSE:
-        /* RX Flow control is enabled and TX Flow control is disabled by a
-         * software over-ride. Since there really isn't a way to advertise
-         * that we are capable of RX Pause ONLY, we will advertise that we
-         * support both symmetric and asymmetric RX PAUSE. Later, we will
-         *  disable the adapter's ability to send PAUSE frames.
-         */
-        txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
-        break;
-    case E1000_FC_TX_PAUSE:
-        /* TX Flow control is enabled, and RX Flow control is disabled, by a
-         * software over-ride.
-         */
-        txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
-        break;
-    case E1000_FC_FULL:
-        /* Flow control (both RX and TX) is enabled by a software over-ride. */
-        txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
-        break;
-    default:
-        DEBUGOUT("Flow control param set incorrectly\n");
-        return -E1000_ERR_CONFIG;
-        break;
-    }
-
-    /* Since auto-negotiation is enabled, take the link out of reset (the link
-     * will be in reset, because we previously reset the chip). This will
-     * restart auto-negotiation.  If auto-neogtiation is successful then the
-     * link-up status bit will be set and the flow control enable bits (RFCE
-     * and TFCE) will be set according to their negotiated value.
-     */
-    DEBUGOUT("Auto-negotiation enabled\n");
-
-    ew32(TXCW, txcw);
-    ew32(CTRL, ctrl);
-    E1000_WRITE_FLUSH();
-
-    hw->txcw = txcw;
-    msleep(1);
-
-    /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
-     * indication in the Device Status Register.  Time-out if a link isn't
-     * seen in 500 milliseconds seconds (Auto-negotiation should complete in
-     * less than 500 milliseconds even if the other end is doing it in SW).
-     * For internal serdes, we just assume a signal is present, then poll.
-     */
-    if (hw->media_type == e1000_media_type_internal_serdes ||
-       (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
-        DEBUGOUT("Looking for Link\n");
-        for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
-            msleep(10);
-            status = er32(STATUS);
-            if (status & E1000_STATUS_LU) break;
-        }
-        if (i == (LINK_UP_TIMEOUT / 10)) {
-            DEBUGOUT("Never got a valid link from auto-neg!!!\n");
-            hw->autoneg_failed = 1;
-            /* AutoNeg failed to achieve a link, so we'll call
-             * e1000_check_for_link. This routine will force the link up if
-             * we detect a signal. This will allow us to communicate with
-             * non-autonegotiating link partners.
-             */
-            ret_val = e1000_check_for_link(hw);
-            if (ret_val) {
-                DEBUGOUT("Error while checking for link\n");
-                return ret_val;
-            }
-            hw->autoneg_failed = 0;
-        } else {
-            hw->autoneg_failed = 0;
-            DEBUGOUT("Valid Link Found\n");
-        }
-    } else {
-        DEBUGOUT("No Signal Detected\n");
-    }
-    return E1000_SUCCESS;
+	u32 ctrl;
+	u32 status;
+	u32 txcw = 0;
+	u32 i;
+	u32 signal = 0;
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_setup_fiber_serdes_link");
+
+	/* On adapters with a MAC newer than 82544, SWDP 1 will be
+	 * set when the optics detect a signal. On older adapters, it will be
+	 * cleared when there is a signal.  This applies to fiber media only.
+	 * If we're on serdes media, adjust the output amplitude to value
+	 * set in the EEPROM.
+	 */
+	ctrl = er32(CTRL);
+	if (hw->media_type == e1000_media_type_fiber)
+		signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+
+	ret_val = e1000_adjust_serdes_amplitude(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Take the link out of reset */
+	ctrl &= ~(E1000_CTRL_LRST);
+
+	/* Adjust VCO speed to improve BER performance */
+	ret_val = e1000_set_vco_speed(hw);
+	if (ret_val)
+		return ret_val;
+
+	e1000_config_collision_dist(hw);
+
+	/* Check for a software override of the flow control settings, and setup
+	 * the device accordingly.  If auto-negotiation is enabled, then software
+	 * will have to set the "PAUSE" bits to the correct value in the Tranmsit
+	 * Config Word Register (TXCW) and re-start auto-negotiation.  However, if
+	 * auto-negotiation is disabled, then software will have to manually
+	 * configure the two flow control enable bits in the CTRL register.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause frames, but
+	 *          not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames but we do
+	 *          not support receiving pause frames).
+	 *      3:  Both Rx and TX flow control (symmetric) are enabled.
+	 */
+	switch (hw->fc) {
+	case E1000_FC_NONE:
+		/* Flow control is completely disabled by a software over-ride. */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+		break;
+	case E1000_FC_RX_PAUSE:
+		/* RX Flow control is enabled and TX Flow control is disabled by a
+		 * software over-ride. Since there really isn't a way to advertise
+		 * that we are capable of RX Pause ONLY, we will advertise that we
+		 * support both symmetric and asymmetric RX PAUSE. Later, we will
+		 *  disable the adapter's ability to send PAUSE frames.
+		 */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+		break;
+	case E1000_FC_TX_PAUSE:
+		/* TX Flow control is enabled, and RX Flow control is disabled, by a
+		 * software over-ride.
+		 */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+		break;
+	case E1000_FC_FULL:
+		/* Flow control (both RX and TX) is enabled by a software over-ride. */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		return -E1000_ERR_CONFIG;
+		break;
+	}
+
+	/* Since auto-negotiation is enabled, take the link out of reset (the link
+	 * will be in reset, because we previously reset the chip). This will
+	 * restart auto-negotiation.  If auto-negotiation is successful then the
+	 * link-up status bit will be set and the flow control enable bits (RFCE
+	 * and TFCE) will be set according to their negotiated value.
+	 */
+	DEBUGOUT("Auto-negotiation enabled\n");
+
+	ew32(TXCW, txcw);
+	ew32(CTRL, ctrl);
+	E1000_WRITE_FLUSH();
+
+	hw->txcw = txcw;
+	msleep(1);
+
+	/* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
+	 * indication in the Device Status Register.  Time-out if a link isn't
+	 * seen in 500 milliseconds seconds (Auto-negotiation should complete in
+	 * less than 500 milliseconds even if the other end is doing it in SW).
+	 * For internal serdes, we just assume a signal is present, then poll.
+	 */
+	if (hw->media_type == e1000_media_type_internal_serdes ||
+	    (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
+		DEBUGOUT("Looking for Link\n");
+		for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
+			msleep(10);
+			status = er32(STATUS);
+			if (status & E1000_STATUS_LU)
+				break;
+		}
+		if (i == (LINK_UP_TIMEOUT / 10)) {
+			DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+			hw->autoneg_failed = 1;
+			/* AutoNeg failed to achieve a link, so we'll call
+			 * e1000_check_for_link. This routine will force the link up if
+			 * we detect a signal. This will allow us to communicate with
+			 * non-autonegotiating link partners.
+			 */
+			ret_val = e1000_check_for_link(hw);
+			if (ret_val) {
+				DEBUGOUT("Error while checking for link\n");
+				return ret_val;
+			}
+			hw->autoneg_failed = 0;
+		} else {
+			hw->autoneg_failed = 0;
+			DEBUGOUT("Valid Link Found\n");
+		}
+	} else {
+		DEBUGOUT("No Signal Detected\n");
+	}
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Make sure we have a valid PHY and change PHY mode before link setup.
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
+/**
+ * e1000_copper_link_preconfig - early configuration for copper
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Make sure we have a valid PHY and change PHY mode before link setup.
+ */
 static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
 {
-    u32 ctrl;
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_copper_link_preconfig");
-
-    ctrl = er32(CTRL);
-    /* With 82543, we need to force speed and duplex on the MAC equal to what
-     * the PHY speed and duplex configuration is. In addition, we need to
-     * perform a hardware reset on the PHY to take it out of reset.
-     */
-    if (hw->mac_type > e1000_82543) {
-        ctrl |= E1000_CTRL_SLU;
-        ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-        ew32(CTRL, ctrl);
-    } else {
-        ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
-        ew32(CTRL, ctrl);
-        ret_val = e1000_phy_hw_reset(hw);
-        if (ret_val)
-            return ret_val;
-    }
-
-    /* Make sure we have a valid PHY */
-    ret_val = e1000_detect_gig_phy(hw);
-    if (ret_val) {
-        DEBUGOUT("Error, did not detect valid phy.\n");
-        return ret_val;
-    }
-    DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
-
-    /* Set PHY to class A mode (if necessary) */
-    ret_val = e1000_set_phy_mode(hw);
-    if (ret_val)
-        return ret_val;
-
-    if ((hw->mac_type == e1000_82545_rev_3) ||
-       (hw->mac_type == e1000_82546_rev_3)) {
-        ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-        phy_data |= 0x00000008;
-        ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-    }
-
-    if (hw->mac_type <= e1000_82543 ||
-        hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
-        hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
-        hw->phy_reset_disable = false;
-
-   return E1000_SUCCESS;
-}
+	u32 ctrl;
+	s32 ret_val;
+	u16 phy_data;
 
+	DEBUGFUNC("e1000_copper_link_preconfig");
 
-/********************************************************************
-* Copper link setup for e1000_phy_igp series.
-*
-* hw - Struct containing variables accessed by shared code
-*********************************************************************/
-static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
-{
-    u32 led_ctrl;
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_copper_link_igp_setup");
-
-    if (hw->phy_reset_disable)
-        return E1000_SUCCESS;
-
-    ret_val = e1000_phy_reset(hw);
-    if (ret_val) {
-        DEBUGOUT("Error Resetting the PHY\n");
-        return ret_val;
-    }
-
-    /* Wait 15ms for MAC to configure PHY from eeprom settings */
-    msleep(15);
-    if (hw->mac_type != e1000_ich8lan) {
-    /* Configure activity LED after PHY reset */
-    led_ctrl = er32(LEDCTL);
-    led_ctrl &= IGP_ACTIVITY_LED_MASK;
-    led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
-    ew32(LEDCTL, led_ctrl);
-    }
-
-    /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
-    if (hw->phy_type == e1000_phy_igp) {
-        /* disable lplu d3 during driver init */
-        ret_val = e1000_set_d3_lplu_state(hw, false);
-        if (ret_val) {
-            DEBUGOUT("Error Disabling LPLU D3\n");
-            return ret_val;
-        }
-    }
-
-    /* disable lplu d0 during driver init */
-    ret_val = e1000_set_d0_lplu_state(hw, false);
-    if (ret_val) {
-        DEBUGOUT("Error Disabling LPLU D0\n");
-        return ret_val;
-    }
-    /* Configure mdi-mdix settings */
-    ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
-        hw->dsp_config_state = e1000_dsp_config_disabled;
-        /* Force MDI for earlier revs of the IGP PHY */
-        phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX);
-        hw->mdix = 1;
-
-    } else {
-        hw->dsp_config_state = e1000_dsp_config_enabled;
-        phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
-
-        switch (hw->mdix) {
-        case 1:
-            phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
-            break;
-        case 2:
-            phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
-            break;
-        case 0:
-        default:
-            phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
-            break;
-        }
-    }
-    ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
-    if (ret_val)
-        return ret_val;
-
-    /* set auto-master slave resolution settings */
-    if (hw->autoneg) {
-        e1000_ms_type phy_ms_setting = hw->master_slave;
-
-        if (hw->ffe_config_state == e1000_ffe_config_active)
-            hw->ffe_config_state = e1000_ffe_config_enabled;
-
-        if (hw->dsp_config_state == e1000_dsp_config_activated)
-            hw->dsp_config_state = e1000_dsp_config_enabled;
-
-        /* when autonegotiation advertisment is only 1000Mbps then we
-          * should disable SmartSpeed and enable Auto MasterSlave
-          * resolution as hardware default. */
-        if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
-            /* Disable SmartSpeed */
-            ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                         &phy_data);
-            if (ret_val)
-                return ret_val;
-            phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-            ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                          phy_data);
-            if (ret_val)
-                return ret_val;
-            /* Set auto Master/Slave resolution process */
-            ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
-            if (ret_val)
-                return ret_val;
-            phy_data &= ~CR_1000T_MS_ENABLE;
-            ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
-            if (ret_val)
-                return ret_val;
-        }
-
-        ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        /* load defaults for future use */
-        hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
-                                        ((phy_data & CR_1000T_MS_VALUE) ?
-                                         e1000_ms_force_master :
-                                         e1000_ms_force_slave) :
-                                         e1000_ms_auto;
-
-        switch (phy_ms_setting) {
-        case e1000_ms_force_master:
-            phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
-            break;
-        case e1000_ms_force_slave:
-            phy_data |= CR_1000T_MS_ENABLE;
-            phy_data &= ~(CR_1000T_MS_VALUE);
-            break;
-        case e1000_ms_auto:
-            phy_data &= ~CR_1000T_MS_ENABLE;
-            default:
-            break;
-        }
-        ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
-        if (ret_val)
-            return ret_val;
-    }
-
-    return E1000_SUCCESS;
+	ctrl = er32(CTRL);
+	/* With 82543, we need to force speed and duplex on the MAC equal to what
+	 * the PHY speed and duplex configuration is. In addition, we need to
+	 * perform a hardware reset on the PHY to take it out of reset.
+	 */
+	if (hw->mac_type > e1000_82543) {
+		ctrl |= E1000_CTRL_SLU;
+		ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+		ew32(CTRL, ctrl);
+	} else {
+		ctrl |=
+		    (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
+		ew32(CTRL, ctrl);
+		ret_val = e1000_phy_hw_reset(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Make sure we have a valid PHY */
+	ret_val = e1000_detect_gig_phy(hw);
+	if (ret_val) {
+		DEBUGOUT("Error, did not detect valid phy.\n");
+		return ret_val;
+	}
+	DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
+
+	/* Set PHY to class A mode (if necessary) */
+	ret_val = e1000_set_phy_mode(hw);
+	if (ret_val)
+		return ret_val;
+
+	if ((hw->mac_type == e1000_82545_rev_3) ||
+	    (hw->mac_type == e1000_82546_rev_3)) {
+		ret_val =
+		    e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+		phy_data |= 0x00000008;
+		ret_val =
+		    e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+	}
+
+	if (hw->mac_type <= e1000_82543 ||
+	    hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
+	    hw->mac_type == e1000_82541_rev_2
+	    || hw->mac_type == e1000_82547_rev_2)
+		hw->phy_reset_disable = false;
+
+	return E1000_SUCCESS;
 }
 
-/********************************************************************
-* Copper link setup for e1000_phy_gg82563 series.
-*
-* hw - Struct containing variables accessed by shared code
-*********************************************************************/
-static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw)
+/**
+ * e1000_copper_link_igp_setup - Copper link setup for e1000_phy_igp series.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    u16 phy_data;
-    u32 reg_data;
-
-    DEBUGFUNC("e1000_copper_link_ggp_setup");
-
-    if (!hw->phy_reset_disable) {
-
-        /* Enable CRS on TX for half-duplex operation. */
-        ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
-                                     &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
-        /* Use 25MHz for both link down and 1000BASE-T for Tx clock */
-        phy_data |= GG82563_MSCR_TX_CLK_1000MBPS_25MHZ;
-
-        ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
-                                      phy_data);
-        if (ret_val)
-            return ret_val;
-
-        /* Options:
-         *   MDI/MDI-X = 0 (default)
-         *   0 - Auto for all speeds
-         *   1 - MDI mode
-         *   2 - MDI-X mode
-         *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
-         */
-        ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
-
-        switch (hw->mdix) {
-        case 1:
-            phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
-            break;
-        case 2:
-            phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
-            break;
-        case 0:
-        default:
-            phy_data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
-            break;
-        }
-
-        /* Options:
-         *   disable_polarity_correction = 0 (default)
-         *       Automatic Correction for Reversed Cable Polarity
-         *   0 - Disabled
-         *   1 - Enabled
-         */
-        phy_data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
-        if (hw->disable_polarity_correction == 1)
-            phy_data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
-        ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data);
-
-        if (ret_val)
-            return ret_val;
-
-        /* SW Reset the PHY so all changes take effect */
-        ret_val = e1000_phy_reset(hw);
-        if (ret_val) {
-            DEBUGOUT("Error Resetting the PHY\n");
-            return ret_val;
-        }
-    } /* phy_reset_disable */
-
-    if (hw->mac_type == e1000_80003es2lan) {
-        /* Bypass RX and TX FIFO's */
-        ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL,
-                                       E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS |
-                                       E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS);
-        if (ret_val)
-            return ret_val;
-
-        ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
-        ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, phy_data);
-
-        if (ret_val)
-            return ret_val;
-
-        reg_data = er32(CTRL_EXT);
-        reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
-        ew32(CTRL_EXT, reg_data);
-
-        ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
-                                          &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        /* Do not init these registers when the HW is in IAMT mode, since the
-         * firmware will have already initialized them.  We only initialize
-         * them if the HW is not in IAMT mode.
-         */
-        if (!e1000_check_mng_mode(hw)) {
-            /* Enable Electrical Idle on the PHY */
-            phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
-            ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
-                                          phy_data);
-            if (ret_val)
-                return ret_val;
-
-            ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
-                                         &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
-            ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
-                                          phy_data);
-
-            if (ret_val)
-                return ret_val;
-        }
-
-        /* Workaround: Disable padding in Kumeran interface in the MAC
-         * and in the PHY to avoid CRC errors.
-         */
-        ret_val = e1000_read_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
-                                     &phy_data);
-        if (ret_val)
-            return ret_val;
-        phy_data |= GG82563_ICR_DIS_PADDING;
-        ret_val = e1000_write_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
-                                      phy_data);
-        if (ret_val)
-            return ret_val;
-    }
-
-    return E1000_SUCCESS;
+	u32 led_ctrl;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_copper_link_igp_setup");
+
+	if (hw->phy_reset_disable)
+		return E1000_SUCCESS;
+
+	ret_val = e1000_phy_reset(hw);
+	if (ret_val) {
+		DEBUGOUT("Error Resetting the PHY\n");
+		return ret_val;
+	}
+
+	/* Wait 15ms for MAC to configure PHY from eeprom settings */
+	msleep(15);
+	/* Configure activity LED after PHY reset */
+	led_ctrl = er32(LEDCTL);
+	led_ctrl &= IGP_ACTIVITY_LED_MASK;
+	led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+	ew32(LEDCTL, led_ctrl);
+
+	/* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
+	if (hw->phy_type == e1000_phy_igp) {
+		/* disable lplu d3 during driver init */
+		ret_val = e1000_set_d3_lplu_state(hw, false);
+		if (ret_val) {
+			DEBUGOUT("Error Disabling LPLU D3\n");
+			return ret_val;
+		}
+	}
+
+	/* Configure mdi-mdix settings */
+	ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+		hw->dsp_config_state = e1000_dsp_config_disabled;
+		/* Force MDI for earlier revs of the IGP PHY */
+		phy_data &=
+		    ~(IGP01E1000_PSCR_AUTO_MDIX |
+		      IGP01E1000_PSCR_FORCE_MDI_MDIX);
+		hw->mdix = 1;
+
+	} else {
+		hw->dsp_config_state = e1000_dsp_config_enabled;
+		phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+		switch (hw->mdix) {
+		case 1:
+			phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+			break;
+		case 2:
+			phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+			break;
+		case 0:
+		default:
+			phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
+			break;
+		}
+	}
+	ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* set auto-master slave resolution settings */
+	if (hw->autoneg) {
+		e1000_ms_type phy_ms_setting = hw->master_slave;
+
+		if (hw->ffe_config_state == e1000_ffe_config_active)
+			hw->ffe_config_state = e1000_ffe_config_enabled;
+
+		if (hw->dsp_config_state == e1000_dsp_config_activated)
+			hw->dsp_config_state = e1000_dsp_config_enabled;
+
+		/* when autonegotiation advertisement is only 1000Mbps then we
+		 * should disable SmartSpeed and enable Auto MasterSlave
+		 * resolution as hardware default. */
+		if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+			/* Disable SmartSpeed */
+			ret_val =
+			    e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					       &phy_data);
+			if (ret_val)
+				return ret_val;
+			phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val =
+			    e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+						phy_data);
+			if (ret_val)
+				return ret_val;
+			/* Set auto Master/Slave resolution process */
+			ret_val =
+			    e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+			if (ret_val)
+				return ret_val;
+			phy_data &= ~CR_1000T_MS_ENABLE;
+			ret_val =
+			    e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+			if (ret_val)
+				return ret_val;
+		}
+
+		ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* load defaults for future use */
+		hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
+		    ((phy_data & CR_1000T_MS_VALUE) ?
+		     e1000_ms_force_master :
+		     e1000_ms_force_slave) : e1000_ms_auto;
+
+		switch (phy_ms_setting) {
+		case e1000_ms_force_master:
+			phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+			break;
+		case e1000_ms_force_slave:
+			phy_data |= CR_1000T_MS_ENABLE;
+			phy_data &= ~(CR_1000T_MS_VALUE);
+			break;
+		case e1000_ms_auto:
+			phy_data &= ~CR_1000T_MS_ENABLE;
+		default:
+			break;
+		}
+		ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return E1000_SUCCESS;
 }
 
-/********************************************************************
-* Copper link setup for e1000_phy_m88 series.
-*
-* hw - Struct containing variables accessed by shared code
-*********************************************************************/
+/**
+ * e1000_copper_link_mgp_setup - Copper link setup for e1000_phy_m88 series.
+ * @hw: Struct containing variables accessed by shared code
+ */
 static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_copper_link_mgp_setup");
-
-    if (hw->phy_reset_disable)
-        return E1000_SUCCESS;
-
-    /* Enable CRS on TX. This must be set for half-duplex operation. */
-    ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
-
-    /* Options:
-     *   MDI/MDI-X = 0 (default)
-     *   0 - Auto for all speeds
-     *   1 - MDI mode
-     *   2 - MDI-X mode
-     *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
-     */
-    phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-
-    switch (hw->mdix) {
-    case 1:
-        phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
-        break;
-    case 2:
-        phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
-        break;
-    case 3:
-        phy_data |= M88E1000_PSCR_AUTO_X_1000T;
-        break;
-    case 0:
-    default:
-        phy_data |= M88E1000_PSCR_AUTO_X_MODE;
-        break;
-    }
-
-    /* Options:
-     *   disable_polarity_correction = 0 (default)
-     *       Automatic Correction for Reversed Cable Polarity
-     *   0 - Disabled
-     *   1 - Enabled
-     */
-    phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
-    if (hw->disable_polarity_correction == 1)
-        phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-    if (ret_val)
-        return ret_val;
-
-    if (hw->phy_revision < M88E1011_I_REV_4) {
-        /* Force TX_CLK in the Extended PHY Specific Control Register
-         * to 25MHz clock.
-         */
-        ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data |= M88E1000_EPSCR_TX_CLK_25;
-
-        if ((hw->phy_revision == E1000_REVISION_2) &&
-            (hw->phy_id == M88E1111_I_PHY_ID)) {
-            /* Vidalia Phy, set the downshift counter to 5x */
-            phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
-            phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
-            ret_val = e1000_write_phy_reg(hw,
-                                        M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
-            if (ret_val)
-                return ret_val;
-        } else {
-            /* Configure Master and Slave downshift values */
-            phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
-                              M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
-            phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
-                             M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
-            ret_val = e1000_write_phy_reg(hw,
-                                        M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
-            if (ret_val)
-               return ret_val;
-        }
-    }
-
-    /* SW Reset the PHY so all changes take effect */
-    ret_val = e1000_phy_reset(hw);
-    if (ret_val) {
-        DEBUGOUT("Error Resetting the PHY\n");
-        return ret_val;
-    }
-
-   return E1000_SUCCESS;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_copper_link_mgp_setup");
+
+	if (hw->phy_reset_disable)
+		return E1000_SUCCESS;
+
+	/* Enable CRS on TX. This must be set for half-duplex operation. */
+	ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+	/* Options:
+	 *   MDI/MDI-X = 0 (default)
+	 *   0 - Auto for all speeds
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+	 */
+	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+	switch (hw->mdix) {
+	case 1:
+		phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+		break;
+	case 2:
+		phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+		break;
+	case 3:
+		phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+		break;
+	case 0:
+	default:
+		phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+		break;
+	}
+
+	/* Options:
+	 *   disable_polarity_correction = 0 (default)
+	 *       Automatic Correction for Reversed Cable Polarity
+	 *   0 - Disabled
+	 *   1 - Enabled
+	 */
+	phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+	if (hw->disable_polarity_correction == 1)
+		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	if (hw->phy_revision < M88E1011_I_REV_4) {
+		/* Force TX_CLK in the Extended PHY Specific Control Register
+		 * to 25MHz clock.
+		 */
+		ret_val =
+		    e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+				       &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+		if ((hw->phy_revision == E1000_REVISION_2) &&
+		    (hw->phy_id == M88E1111_I_PHY_ID)) {
+			/* Vidalia Phy, set the downshift counter to 5x */
+			phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+			phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+			ret_val = e1000_write_phy_reg(hw,
+						      M88E1000_EXT_PHY_SPEC_CTRL,
+						      phy_data);
+			if (ret_val)
+				return ret_val;
+		} else {
+			/* Configure Master and Slave downshift values */
+			phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+				      M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+			phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+				     M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+			ret_val = e1000_write_phy_reg(hw,
+						      M88E1000_EXT_PHY_SPEC_CTRL,
+						      phy_data);
+			if (ret_val)
+				return ret_val;
+		}
+	}
+
+	/* SW Reset the PHY so all changes take effect */
+	ret_val = e1000_phy_reset(hw);
+	if (ret_val) {
+		DEBUGOUT("Error Resetting the PHY\n");
+		return ret_val;
+	}
+
+	return E1000_SUCCESS;
 }
 
-/********************************************************************
-* Setup auto-negotiation and flow control advertisements,
-* and then perform auto-negotiation.
-*
-* hw - Struct containing variables accessed by shared code
-*********************************************************************/
+/**
+ * e1000_copper_link_autoneg - setup auto-neg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Setup auto-negotiation and flow control advertisements,
+ * and then perform auto-negotiation.
+ */
 static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_copper_link_autoneg");
-
-    /* Perform some bounds checking on the hw->autoneg_advertised
-     * parameter.  If this variable is zero, then set it to the default.
-     */
-    hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
-
-    /* If autoneg_advertised is zero, we assume it was not defaulted
-     * by the calling code so we set to advertise full capability.
-     */
-    if (hw->autoneg_advertised == 0)
-        hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-
-    /* IFE phy only supports 10/100 */
-    if (hw->phy_type == e1000_phy_ife)
-        hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
-
-    DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
-    ret_val = e1000_phy_setup_autoneg(hw);
-    if (ret_val) {
-        DEBUGOUT("Error Setting up Auto-Negotiation\n");
-        return ret_val;
-    }
-    DEBUGOUT("Restarting Auto-Neg\n");
-
-    /* Restart auto-negotiation by setting the Auto Neg Enable bit and
-     * the Auto Neg Restart bit in the PHY control register.
-     */
-    ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
-    ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
-    if (ret_val)
-        return ret_val;
-
-    /* Does the user want to wait for Auto-Neg to complete here, or
-     * check at a later time (for example, callback routine).
-     */
-    if (hw->wait_autoneg_complete) {
-        ret_val = e1000_wait_autoneg(hw);
-        if (ret_val) {
-            DEBUGOUT("Error while waiting for autoneg to complete\n");
-            return ret_val;
-        }
-    }
-
-    hw->get_link_status = true;
-
-    return E1000_SUCCESS;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_copper_link_autoneg");
+
+	/* Perform some bounds checking on the hw->autoneg_advertised
+	 * parameter.  If this variable is zero, then set it to the default.
+	 */
+	hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+	/* If autoneg_advertised is zero, we assume it was not defaulted
+	 * by the calling code so we set to advertise full capability.
+	 */
+	if (hw->autoneg_advertised == 0)
+		hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+	DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+	ret_val = e1000_phy_setup_autoneg(hw);
+	if (ret_val) {
+		DEBUGOUT("Error Setting up Auto-Negotiation\n");
+		return ret_val;
+	}
+	DEBUGOUT("Restarting Auto-Neg\n");
+
+	/* Restart auto-negotiation by setting the Auto Neg Enable bit and
+	 * the Auto Neg Restart bit in the PHY control register.
+	 */
+	ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+	ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Does the user want to wait for Auto-Neg to complete here, or
+	 * check at a later time (for example, callback routine).
+	 */
+	if (hw->wait_autoneg_complete) {
+		ret_val = e1000_wait_autoneg(hw);
+		if (ret_val) {
+			DEBUGOUT
+			    ("Error while waiting for autoneg to complete\n");
+			return ret_val;
+		}
+	}
+
+	hw->get_link_status = true;
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Config the MAC and the PHY after link is up.
-*   1) Set up the MAC to the current PHY speed/duplex
-*      if we are on 82543.  If we
-*      are on newer silicon, we only need to configure
-*      collision distance in the Transmit Control Register.
-*   2) Set up flow control on the MAC to that established with
-*      the link partner.
-*   3) Config DSP to improve Gigabit link quality for some PHY revisions.
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
+/**
+ * e1000_copper_link_postconfig - post link setup
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Config the MAC and the PHY after link is up.
+ *   1) Set up the MAC to the current PHY speed/duplex
+ *      if we are on 82543.  If we
+ *      are on newer silicon, we only need to configure
+ *      collision distance in the Transmit Control Register.
+ *   2) Set up flow control on the MAC to that established with
+ *      the link partner.
+ *   3) Config DSP to improve Gigabit link quality for some PHY revisions.
+ */
 static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    DEBUGFUNC("e1000_copper_link_postconfig");
-
-    if (hw->mac_type >= e1000_82544) {
-        e1000_config_collision_dist(hw);
-    } else {
-        ret_val = e1000_config_mac_to_phy(hw);
-        if (ret_val) {
-            DEBUGOUT("Error configuring MAC to PHY settings\n");
-            return ret_val;
-        }
-    }
-    ret_val = e1000_config_fc_after_link_up(hw);
-    if (ret_val) {
-        DEBUGOUT("Error Configuring Flow Control\n");
-        return ret_val;
-    }
-
-    /* Config DSP to improve Giga link quality */
-    if (hw->phy_type == e1000_phy_igp) {
-        ret_val = e1000_config_dsp_after_link_change(hw, true);
-        if (ret_val) {
-            DEBUGOUT("Error Configuring DSP after link up\n");
-            return ret_val;
-        }
-    }
-
-    return E1000_SUCCESS;
+	s32 ret_val;
+	DEBUGFUNC("e1000_copper_link_postconfig");
+
+	if (hw->mac_type >= e1000_82544) {
+		e1000_config_collision_dist(hw);
+	} else {
+		ret_val = e1000_config_mac_to_phy(hw);
+		if (ret_val) {
+			DEBUGOUT("Error configuring MAC to PHY settings\n");
+			return ret_val;
+		}
+	}
+	ret_val = e1000_config_fc_after_link_up(hw);
+	if (ret_val) {
+		DEBUGOUT("Error Configuring Flow Control\n");
+		return ret_val;
+	}
+
+	/* Config DSP to improve Giga link quality */
+	if (hw->phy_type == e1000_phy_igp) {
+		ret_val = e1000_config_dsp_after_link_change(hw, true);
+		if (ret_val) {
+			DEBUGOUT("Error Configuring DSP after link up\n");
+			return ret_val;
+		}
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Detects which PHY is present and setup the speed and duplex
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
+/**
+ * e1000_setup_copper_link - phy/speed/duplex setting
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Detects which PHY is present and sets up the speed and duplex
+ */
 static s32 e1000_setup_copper_link(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    u16 i;
-    u16 phy_data;
-    u16 reg_data = 0;
-
-    DEBUGFUNC("e1000_setup_copper_link");
-
-    switch (hw->mac_type) {
-    case e1000_80003es2lan:
-    case e1000_ich8lan:
-        /* Set the mac to wait the maximum time between each
-         * iteration and increase the max iterations when
-         * polling the phy; this fixes erroneous timeouts at 10Mbps. */
-        ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
-        if (ret_val)
-            return ret_val;
-        ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), &reg_data);
-        if (ret_val)
-            return ret_val;
-        reg_data |= 0x3F;
-        ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
-        if (ret_val)
-            return ret_val;
-    default:
-        break;
-    }
-
-    /* Check if it is a valid PHY and set PHY mode if necessary. */
-    ret_val = e1000_copper_link_preconfig(hw);
-    if (ret_val)
-        return ret_val;
-
-    switch (hw->mac_type) {
-    case e1000_80003es2lan:
-        /* Kumeran registers are written-only */
-        reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT;
-        reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING;
-        ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
-                                       reg_data);
-        if (ret_val)
-            return ret_val;
-        break;
-    default:
-        break;
-    }
-
-    if (hw->phy_type == e1000_phy_igp ||
-        hw->phy_type == e1000_phy_igp_3 ||
-        hw->phy_type == e1000_phy_igp_2) {
-        ret_val = e1000_copper_link_igp_setup(hw);
-        if (ret_val)
-            return ret_val;
-    } else if (hw->phy_type == e1000_phy_m88) {
-        ret_val = e1000_copper_link_mgp_setup(hw);
-        if (ret_val)
-            return ret_val;
-    } else if (hw->phy_type == e1000_phy_gg82563) {
-        ret_val = e1000_copper_link_ggp_setup(hw);
-        if (ret_val)
-            return ret_val;
-    }
-
-    if (hw->autoneg) {
-        /* Setup autoneg and flow control advertisement
-          * and perform autonegotiation */
-        ret_val = e1000_copper_link_autoneg(hw);
-        if (ret_val)
-            return ret_val;
-    } else {
-        /* PHY will be set to 10H, 10F, 100H,or 100F
-          * depending on value from forced_speed_duplex. */
-        DEBUGOUT("Forcing speed and duplex\n");
-        ret_val = e1000_phy_force_speed_duplex(hw);
-        if (ret_val) {
-            DEBUGOUT("Error Forcing Speed and Duplex\n");
-            return ret_val;
-        }
-    }
-
-    /* Check link status. Wait up to 100 microseconds for link to become
-     * valid.
-     */
-    for (i = 0; i < 10; i++) {
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if (ret_val)
-            return ret_val;
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        if (phy_data & MII_SR_LINK_STATUS) {
-            /* Config the MAC and PHY after link is up */
-            ret_val = e1000_copper_link_postconfig(hw);
-            if (ret_val)
-                return ret_val;
-
-            DEBUGOUT("Valid link established!!!\n");
-            return E1000_SUCCESS;
-        }
-        udelay(10);
-    }
-
-    DEBUGOUT("Unable to establish link!!!\n");
-    return E1000_SUCCESS;
+	s32 ret_val;
+	u16 i;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_setup_copper_link");
+
+	/* Check if it is a valid PHY and set PHY mode if necessary. */
+	ret_val = e1000_copper_link_preconfig(hw);
+	if (ret_val)
+		return ret_val;
+
+	if (hw->phy_type == e1000_phy_igp) {
+		ret_val = e1000_copper_link_igp_setup(hw);
+		if (ret_val)
+			return ret_val;
+	} else if (hw->phy_type == e1000_phy_m88) {
+		ret_val = e1000_copper_link_mgp_setup(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (hw->autoneg) {
+		/* Setup autoneg and flow control advertisement
+		 * and perform autonegotiation */
+		ret_val = e1000_copper_link_autoneg(hw);
+		if (ret_val)
+			return ret_val;
+	} else {
+		/* PHY will be set to 10H, 10F, 100H,or 100F
+		 * depending on value from forced_speed_duplex. */
+		DEBUGOUT("Forcing speed and duplex\n");
+		ret_val = e1000_phy_force_speed_duplex(hw);
+		if (ret_val) {
+			DEBUGOUT("Error Forcing Speed and Duplex\n");
+			return ret_val;
+		}
+	}
+
+	/* Check link status. Wait up to 100 microseconds for link to become
+	 * valid.
+	 */
+	for (i = 0; i < 10; i++) {
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		if (phy_data & MII_SR_LINK_STATUS) {
+			/* Config the MAC and PHY after link is up */
+			ret_val = e1000_copper_link_postconfig(hw);
+			if (ret_val)
+				return ret_val;
+
+			DEBUGOUT("Valid link established!!!\n");
+			return E1000_SUCCESS;
+		}
+		udelay(10);
+	}
+
+	DEBUGOUT("Unable to establish link!!!\n");
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Configure the MAC-to-PHY interface for 10/100Mbps
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
+/**
+ * e1000_phy_setup_autoneg - phy settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Configures PHY autoneg and flow control advertisement settings
+ */
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 {
-    s32 ret_val = E1000_SUCCESS;
-    u32 tipg;
-    u16 reg_data;
+	s32 ret_val;
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg;
 
-    DEBUGFUNC("e1000_configure_kmrn_for_10_100");
+	DEBUGFUNC("e1000_phy_setup_autoneg");
 
-    reg_data = E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT;
-    ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
-                                   reg_data);
-    if (ret_val)
-        return ret_val;
+	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
+	ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
 
-    /* Configure Transmit Inter-Packet Gap */
-    tipg = er32(TIPG);
-    tipg &= ~E1000_TIPG_IPGT_MASK;
-    tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
-    ew32(TIPG, tipg);
+	/* Read the MII 1000Base-T Control Register (Address 9). */
+	ret_val =
+	    e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+	if (ret_val)
+		return ret_val;
 
-    ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+	/* Need to parse both autoneg_advertised and fc and set up
+	 * the appropriate PHY registers.  First we will parse for
+	 * autoneg_advertised software override.  Since we can advertise
+	 * a plethora of combinations, we need to check each bit
+	 * individually.
+	 */
 
-    if (ret_val)
-        return ret_val;
+	/* First we clear all the 10/100 mb speed bits in the Auto-Neg
+	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
+	 * the  1000Base-T Control Register (Address 9).
+	 */
+	mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
+	mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
 
-    if (duplex == HALF_DUPLEX)
-        reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
-    else
-        reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+	DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
 
-    ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+	/* Do we want to advertise 10 Mb Half Duplex? */
+	if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
+		DEBUGOUT("Advertise 10mb Half duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+	}
 
-    return ret_val;
-}
+	/* Do we want to advertise 10 Mb Full Duplex? */
+	if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
+		DEBUGOUT("Advertise 10mb Full duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+	}
 
-static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
-{
-    s32 ret_val = E1000_SUCCESS;
-    u16 reg_data;
-    u32 tipg;
+	/* Do we want to advertise 100 Mb Half Duplex? */
+	if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
+		DEBUGOUT("Advertise 100mb Half duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+	}
 
-    DEBUGFUNC("e1000_configure_kmrn_for_1000");
+	/* Do we want to advertise 100 Mb Full Duplex? */
+	if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
+		DEBUGOUT("Advertise 100mb Full duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+	}
 
-    reg_data = E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT;
-    ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
-                                   reg_data);
-    if (ret_val)
-        return ret_val;
+	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+	if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
+		DEBUGOUT
+		    ("Advertise 1000mb Half duplex requested, request denied!\n");
+	}
 
-    /* Configure Transmit Inter-Packet Gap */
-    tipg = er32(TIPG);
-    tipg &= ~E1000_TIPG_IPGT_MASK;
-    tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
-    ew32(TIPG, tipg);
+	/* Do we want to advertise 1000 Mb Full Duplex? */
+	if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
+		DEBUGOUT("Advertise 1000mb Full duplex\n");
+		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+	}
 
-    ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+	/* Check for a software override of the flow control settings, and
+	 * setup the PHY advertisement registers accordingly.  If
+	 * auto-negotiation is enabled, then software will have to set the
+	 * "PAUSE" bits to the correct value in the Auto-Negotiation
+	 * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause frames
+	 *          but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          but we do not support receiving pause frames).
+	 *      3:  Both Rx and TX flow control (symmetric) are enabled.
+	 *  other:  No software override.  The flow control configuration
+	 *          in the EEPROM is used.
+	 */
+	switch (hw->fc) {
+	case E1000_FC_NONE:	/* 0 */
+		/* Flow control (RX & TX) is completely disabled by a
+		 * software over-ride.
+		 */
+		mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	case E1000_FC_RX_PAUSE:	/* 1 */
+		/* RX Flow control is enabled, and TX Flow control is
+		 * disabled, by a software over-ride.
+		 */
+		/* Since there really isn't a way to advertise that we are
+		 * capable of RX Pause ONLY, we will advertise that we
+		 * support both symmetric and asymmetric RX PAUSE.  Later
+		 * (in e1000_config_fc_after_link_up) we will disable the
+		 *hw's ability to send PAUSE frames.
+		 */
+		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	case E1000_FC_TX_PAUSE:	/* 2 */
+		/* TX Flow control is enabled, and RX Flow control is
+		 * disabled, by a software over-ride.
+		 */
+		mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+		mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+		break;
+	case E1000_FC_FULL:	/* 3 */
+		/* Flow control (both RX and TX) is enabled by a software
+		 * over-ride.
+		 */
+		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		return -E1000_ERR_CONFIG;
+	}
 
-    if (ret_val)
-        return ret_val;
+	ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
 
-    reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
-    ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+	DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
-    return ret_val;
-}
+	ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+	if (ret_val)
+		return ret_val;
 
-/******************************************************************************
-* Configures PHY autoneg and flow control advertisement settings
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
-{
-    s32 ret_val;
-    u16 mii_autoneg_adv_reg;
-    u16 mii_1000t_ctrl_reg;
-
-    DEBUGFUNC("e1000_phy_setup_autoneg");
-
-    /* Read the MII Auto-Neg Advertisement Register (Address 4). */
-    ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
-    if (ret_val)
-        return ret_val;
-
-    if (hw->phy_type != e1000_phy_ife) {
-        /* Read the MII 1000Base-T Control Register (Address 9). */
-        ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
-        if (ret_val)
-            return ret_val;
-    } else
-        mii_1000t_ctrl_reg=0;
-
-    /* Need to parse both autoneg_advertised and fc and set up
-     * the appropriate PHY registers.  First we will parse for
-     * autoneg_advertised software override.  Since we can advertise
-     * a plethora of combinations, we need to check each bit
-     * individually.
-     */
-
-    /* First we clear all the 10/100 mb speed bits in the Auto-Neg
-     * Advertisement Register (Address 4) and the 1000 mb speed bits in
-     * the  1000Base-T Control Register (Address 9).
-     */
-    mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
-    mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
-
-    DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
-
-    /* Do we want to advertise 10 Mb Half Duplex? */
-    if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
-        DEBUGOUT("Advertise 10mb Half duplex\n");
-        mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
-    }
-
-    /* Do we want to advertise 10 Mb Full Duplex? */
-    if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
-        DEBUGOUT("Advertise 10mb Full duplex\n");
-        mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
-    }
-
-    /* Do we want to advertise 100 Mb Half Duplex? */
-    if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
-        DEBUGOUT("Advertise 100mb Half duplex\n");
-        mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
-    }
-
-    /* Do we want to advertise 100 Mb Full Duplex? */
-    if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
-        DEBUGOUT("Advertise 100mb Full duplex\n");
-        mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
-    }
-
-    /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
-    if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
-        DEBUGOUT("Advertise 1000mb Half duplex requested, request denied!\n");
-    }
-
-    /* Do we want to advertise 1000 Mb Full Duplex? */
-    if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
-        DEBUGOUT("Advertise 1000mb Full duplex\n");
-        mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
-        if (hw->phy_type == e1000_phy_ife) {
-            DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n");
-        }
-    }
-
-    /* Check for a software override of the flow control settings, and
-     * setup the PHY advertisement registers accordingly.  If
-     * auto-negotiation is enabled, then software will have to set the
-     * "PAUSE" bits to the correct value in the Auto-Negotiation
-     * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
-     *
-     * The possible values of the "fc" parameter are:
-     *      0:  Flow control is completely disabled
-     *      1:  Rx flow control is enabled (we can receive pause frames
-     *          but not send pause frames).
-     *      2:  Tx flow control is enabled (we can send pause frames
-     *          but we do not support receiving pause frames).
-     *      3:  Both Rx and TX flow control (symmetric) are enabled.
-     *  other:  No software override.  The flow control configuration
-     *          in the EEPROM is used.
-     */
-    switch (hw->fc) {
-    case E1000_FC_NONE: /* 0 */
-        /* Flow control (RX & TX) is completely disabled by a
-         * software over-ride.
-         */
-        mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
-        break;
-    case E1000_FC_RX_PAUSE: /* 1 */
-        /* RX Flow control is enabled, and TX Flow control is
-         * disabled, by a software over-ride.
-         */
-        /* Since there really isn't a way to advertise that we are
-         * capable of RX Pause ONLY, we will advertise that we
-         * support both symmetric and asymmetric RX PAUSE.  Later
-         * (in e1000_config_fc_after_link_up) we will disable the
-         *hw's ability to send PAUSE frames.
-         */
-        mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
-        break;
-    case E1000_FC_TX_PAUSE: /* 2 */
-        /* TX Flow control is enabled, and RX Flow control is
-         * disabled, by a software over-ride.
-         */
-        mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
-        mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
-        break;
-    case E1000_FC_FULL: /* 3 */
-        /* Flow control (both RX and TX) is enabled by a software
-         * over-ride.
-         */
-        mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
-        break;
-    default:
-        DEBUGOUT("Flow control param set incorrectly\n");
-        return -E1000_ERR_CONFIG;
-    }
-
-    ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
-    if (ret_val)
-        return ret_val;
-
-    DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
-
-    if (hw->phy_type != e1000_phy_ife) {
-        ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
-        if (ret_val)
-            return ret_val;
-    }
-
-    return E1000_SUCCESS;
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Force PHY speed and duplex settings to hw->forced_speed_duplex
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
+/**
+ * e1000_phy_force_speed_duplex - force link settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Force PHY speed and duplex settings to hw->forced_speed_duplex
+ */
 static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 {
-    u32 ctrl;
-    s32 ret_val;
-    u16 mii_ctrl_reg;
-    u16 mii_status_reg;
-    u16 phy_data;
-    u16 i;
-
-    DEBUGFUNC("e1000_phy_force_speed_duplex");
-
-    /* Turn off Flow control if we are forcing speed and duplex. */
-    hw->fc = E1000_FC_NONE;
-
-    DEBUGOUT1("hw->fc = %d\n", hw->fc);
-
-    /* Read the Device Control Register. */
-    ctrl = er32(CTRL);
-
-    /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
-    ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-    ctrl &= ~(DEVICE_SPEED_MASK);
-
-    /* Clear the Auto Speed Detect Enable bit. */
-    ctrl &= ~E1000_CTRL_ASDE;
-
-    /* Read the MII Control Register. */
-    ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
-    if (ret_val)
-        return ret_val;
-
-    /* We need to disable autoneg in order to force link and duplex. */
-
-    mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
-
-    /* Are we forcing Full or Half Duplex? */
-    if (hw->forced_speed_duplex == e1000_100_full ||
-        hw->forced_speed_duplex == e1000_10_full) {
-        /* We want to force full duplex so we SET the full duplex bits in the
-         * Device and MII Control Registers.
-         */
-        ctrl |= E1000_CTRL_FD;
-        mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
-        DEBUGOUT("Full Duplex\n");
-    } else {
-        /* We want to force half duplex so we CLEAR the full duplex bits in
-         * the Device and MII Control Registers.
-         */
-        ctrl &= ~E1000_CTRL_FD;
-        mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
-        DEBUGOUT("Half Duplex\n");
-    }
-
-    /* Are we forcing 100Mbps??? */
-    if (hw->forced_speed_duplex == e1000_100_full ||
-       hw->forced_speed_duplex == e1000_100_half) {
-        /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
-        ctrl |= E1000_CTRL_SPD_100;
-        mii_ctrl_reg |= MII_CR_SPEED_100;
-        mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
-        DEBUGOUT("Forcing 100mb ");
-    } else {
-        /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
-        ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
-        mii_ctrl_reg |= MII_CR_SPEED_10;
-        mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
-        DEBUGOUT("Forcing 10mb ");
-    }
-
-    e1000_config_collision_dist(hw);
-
-    /* Write the configured values back to the Device Control Reg. */
-    ew32(CTRL, ctrl);
-
-    if ((hw->phy_type == e1000_phy_m88) ||
-        (hw->phy_type == e1000_phy_gg82563)) {
-        ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
-         * forced whenever speed are duplex are forced.
-         */
-        phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-        ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-        if (ret_val)
-            return ret_val;
-
-        DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
-
-        /* Need to reset the PHY or these changes will be ignored */
-        mii_ctrl_reg |= MII_CR_RESET;
-
-    /* Disable MDI-X support for 10/100 */
-    } else if (hw->phy_type == e1000_phy_ife) {
-        ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data &= ~IFE_PMC_AUTO_MDIX;
-        phy_data &= ~IFE_PMC_FORCE_MDIX;
-
-        ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data);
-        if (ret_val)
-            return ret_val;
-
-    } else {
-        /* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
-         * forced whenever speed or duplex are forced.
-         */
-        ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
-        phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
-
-        ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
-        if (ret_val)
-            return ret_val;
-    }
-
-    /* Write back the modified PHY MII control register. */
-    ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
-    if (ret_val)
-        return ret_val;
-
-    udelay(1);
-
-    /* The wait_autoneg_complete flag may be a little misleading here.
-     * Since we are forcing speed and duplex, Auto-Neg is not enabled.
-     * But we do want to delay for a period while forcing only so we
-     * don't generate false No Link messages.  So we will wait here
-     * only if the user has set wait_autoneg_complete to 1, which is
-     * the default.
-     */
-    if (hw->wait_autoneg_complete) {
-        /* We will wait for autoneg to complete. */
-        DEBUGOUT("Waiting for forced speed/duplex link.\n");
-        mii_status_reg = 0;
-
-        /* We will wait for autoneg to complete or 4.5 seconds to expire. */
-        for (i = PHY_FORCE_TIME; i > 0; i--) {
-            /* Read the MII Status Register and wait for Auto-Neg Complete bit
-             * to be set.
-             */
-            ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-            if (ret_val)
-                return ret_val;
-
-            ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-            if (ret_val)
-                return ret_val;
-
-            if (mii_status_reg & MII_SR_LINK_STATUS) break;
-            msleep(100);
-        }
-        if ((i == 0) &&
-           ((hw->phy_type == e1000_phy_m88) ||
-            (hw->phy_type == e1000_phy_gg82563))) {
-            /* We didn't get link.  Reset the DSP and wait again for link. */
-            ret_val = e1000_phy_reset_dsp(hw);
-            if (ret_val) {
-                DEBUGOUT("Error Resetting PHY DSP\n");
-                return ret_val;
-            }
-        }
-        /* This loop will early-out if the link condition has been met.  */
-        for (i = PHY_FORCE_TIME; i > 0; i--) {
-            if (mii_status_reg & MII_SR_LINK_STATUS) break;
-            msleep(100);
-            /* Read the MII Status Register and wait for Auto-Neg Complete bit
-             * to be set.
-             */
-            ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-            if (ret_val)
-                return ret_val;
-
-            ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-            if (ret_val)
-                return ret_val;
-        }
-    }
-
-    if (hw->phy_type == e1000_phy_m88) {
-        /* Because we reset the PHY above, we need to re-force TX_CLK in the
-         * Extended PHY Specific Control Register to 25MHz clock.  This value
-         * defaults back to a 2.5MHz clock when the PHY is reset.
-         */
-        ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data |= M88E1000_EPSCR_TX_CLK_25;
-        ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
-        if (ret_val)
-            return ret_val;
-
-        /* In addition, because of the s/w reset above, we need to enable CRS on
-         * TX.  This must be set for both full and half duplex operation.
-         */
-        ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
-        ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-        if (ret_val)
-            return ret_val;
-
-        if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
-            (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full ||
-             hw->forced_speed_duplex == e1000_10_half)) {
-            ret_val = e1000_polarity_reversal_workaround(hw);
-            if (ret_val)
-                return ret_val;
-        }
-    } else if (hw->phy_type == e1000_phy_gg82563) {
-        /* The TX_CLK of the Extended PHY Specific Control Register defaults
-         * to 2.5MHz on a reset.  We need to re-force it back to 25MHz, if
-         * we're not in a forced 10/duplex configuration. */
-        ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
-        if ((hw->forced_speed_duplex == e1000_10_full) ||
-            (hw->forced_speed_duplex == e1000_10_half))
-            phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ;
-        else
-            phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25MHZ;
-
-        /* Also due to the reset, we need to enable CRS on Tx. */
-        phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
-
-        ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
-        if (ret_val)
-            return ret_val;
-    }
-    return E1000_SUCCESS;
+	u32 ctrl;
+	s32 ret_val;
+	u16 mii_ctrl_reg;
+	u16 mii_status_reg;
+	u16 phy_data;
+	u16 i;
+
+	DEBUGFUNC("e1000_phy_force_speed_duplex");
+
+	/* Turn off Flow control if we are forcing speed and duplex. */
+	hw->fc = E1000_FC_NONE;
+
+	DEBUGOUT1("hw->fc = %d\n", hw->fc);
+
+	/* Read the Device Control Register. */
+	ctrl = er32(CTRL);
+
+	/* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
+	ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ctrl &= ~(DEVICE_SPEED_MASK);
+
+	/* Clear the Auto Speed Detect Enable bit. */
+	ctrl &= ~E1000_CTRL_ASDE;
+
+	/* Read the MII Control Register. */
+	ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
+	if (ret_val)
+		return ret_val;
+
+	/* We need to disable autoneg in order to force link and duplex. */
+
+	mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
+
+	/* Are we forcing Full or Half Duplex? */
+	if (hw->forced_speed_duplex == e1000_100_full ||
+	    hw->forced_speed_duplex == e1000_10_full) {
+		/* We want to force full duplex so we SET the full duplex bits in the
+		 * Device and MII Control Registers.
+		 */
+		ctrl |= E1000_CTRL_FD;
+		mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
+		DEBUGOUT("Full Duplex\n");
+	} else {
+		/* We want to force half duplex so we CLEAR the full duplex bits in
+		 * the Device and MII Control Registers.
+		 */
+		ctrl &= ~E1000_CTRL_FD;
+		mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
+		DEBUGOUT("Half Duplex\n");
+	}
+
+	/* Are we forcing 100Mbps??? */
+	if (hw->forced_speed_duplex == e1000_100_full ||
+	    hw->forced_speed_duplex == e1000_100_half) {
+		/* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
+		ctrl |= E1000_CTRL_SPD_100;
+		mii_ctrl_reg |= MII_CR_SPEED_100;
+		mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+		DEBUGOUT("Forcing 100mb ");
+	} else {
+		/* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
+		ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+		mii_ctrl_reg |= MII_CR_SPEED_10;
+		mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+		DEBUGOUT("Forcing 10mb ");
+	}
+
+	e1000_config_collision_dist(hw);
+
+	/* Write the configured values back to the Device Control Reg. */
+	ew32(CTRL, ctrl);
+
+	if (hw->phy_type == e1000_phy_m88) {
+		ret_val =
+		    e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+		 * forced whenever speed are duplex are forced.
+		 */
+		phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+		ret_val =
+		    e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+		if (ret_val)
+			return ret_val;
+
+		DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
+
+		/* Need to reset the PHY or these changes will be ignored */
+		mii_ctrl_reg |= MII_CR_RESET;
+
+		/* Disable MDI-X support for 10/100 */
+	} else {
+		/* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
+		 * forced whenever speed or duplex are forced.
+		 */
+		ret_val =
+		    e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+		phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+		ret_val =
+		    e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Write back the modified PHY MII control register. */
+	ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
+	if (ret_val)
+		return ret_val;
+
+	udelay(1);
+
+	/* The wait_autoneg_complete flag may be a little misleading here.
+	 * Since we are forcing speed and duplex, Auto-Neg is not enabled.
+	 * But we do want to delay for a period while forcing only so we
+	 * don't generate false No Link messages.  So we will wait here
+	 * only if the user has set wait_autoneg_complete to 1, which is
+	 * the default.
+	 */
+	if (hw->wait_autoneg_complete) {
+		/* We will wait for autoneg to complete. */
+		DEBUGOUT("Waiting for forced speed/duplex link.\n");
+		mii_status_reg = 0;
+
+		/* We will wait for autoneg to complete or 4.5 seconds to expire. */
+		for (i = PHY_FORCE_TIME; i > 0; i--) {
+			/* Read the MII Status Register and wait for Auto-Neg Complete bit
+			 * to be set.
+			 */
+			ret_val =
+			    e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+			if (ret_val)
+				return ret_val;
+
+			ret_val =
+			    e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+			if (ret_val)
+				return ret_val;
+
+			if (mii_status_reg & MII_SR_LINK_STATUS)
+				break;
+			msleep(100);
+		}
+		if ((i == 0) && (hw->phy_type == e1000_phy_m88)) {
+			/* We didn't get link.  Reset the DSP and wait again for link. */
+			ret_val = e1000_phy_reset_dsp(hw);
+			if (ret_val) {
+				DEBUGOUT("Error Resetting PHY DSP\n");
+				return ret_val;
+			}
+		}
+		/* This loop will early-out if the link condition has been met.  */
+		for (i = PHY_FORCE_TIME; i > 0; i--) {
+			if (mii_status_reg & MII_SR_LINK_STATUS)
+				break;
+			msleep(100);
+			/* Read the MII Status Register and wait for Auto-Neg Complete bit
+			 * to be set.
+			 */
+			ret_val =
+			    e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+			if (ret_val)
+				return ret_val;
+
+			ret_val =
+			    e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+			if (ret_val)
+				return ret_val;
+		}
+	}
+
+	if (hw->phy_type == e1000_phy_m88) {
+		/* Because we reset the PHY above, we need to re-force TX_CLK in the
+		 * Extended PHY Specific Control Register to 25MHz clock.  This value
+		 * defaults back to a 2.5MHz clock when the PHY is reset.
+		 */
+		ret_val =
+		    e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+				       &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_data |= M88E1000_EPSCR_TX_CLK_25;
+		ret_val =
+		    e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+					phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* In addition, because of the s/w reset above, we need to enable CRS on
+		 * TX.  This must be set for both full and half duplex operation.
+		 */
+		ret_val =
+		    e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+		ret_val =
+		    e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+		if (ret_val)
+			return ret_val;
+
+		if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543)
+		    && (!hw->autoneg)
+		    && (hw->forced_speed_duplex == e1000_10_full
+			|| hw->forced_speed_duplex == e1000_10_half)) {
+			ret_val = e1000_polarity_reversal_workaround(hw);
+			if (ret_val)
+				return ret_val;
+		}
+	}
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Sets the collision distance in the Transmit Control register
-*
-* hw - Struct containing variables accessed by shared code
-*
-* Link should have been established previously. Reads the speed and duplex
-* information from the Device Status register.
-******************************************************************************/
+/**
+ * e1000_config_collision_dist - set collision distance register
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sets the collision distance in the Transmit Control register.
+ * Link should have been established previously. Reads the speed and duplex
+ * information from the Device Status register.
+ */
 void e1000_config_collision_dist(struct e1000_hw *hw)
 {
-    u32 tctl, coll_dist;
+	u32 tctl, coll_dist;
 
-    DEBUGFUNC("e1000_config_collision_dist");
+	DEBUGFUNC("e1000_config_collision_dist");
 
-    if (hw->mac_type < e1000_82543)
-        coll_dist = E1000_COLLISION_DISTANCE_82542;
-    else
-        coll_dist = E1000_COLLISION_DISTANCE;
+	if (hw->mac_type < e1000_82543)
+		coll_dist = E1000_COLLISION_DISTANCE_82542;
+	else
+		coll_dist = E1000_COLLISION_DISTANCE;
 
-    tctl = er32(TCTL);
+	tctl = er32(TCTL);
 
-    tctl &= ~E1000_TCTL_COLD;
-    tctl |= coll_dist << E1000_COLD_SHIFT;
+	tctl &= ~E1000_TCTL_COLD;
+	tctl |= coll_dist << E1000_COLD_SHIFT;
 
-    ew32(TCTL, tctl);
-    E1000_WRITE_FLUSH();
+	ew32(TCTL, tctl);
+	E1000_WRITE_FLUSH();
 }
 
-/******************************************************************************
-* Sets MAC speed and duplex settings to reflect the those in the PHY
-*
-* hw - Struct containing variables accessed by shared code
-* mii_reg - data to write to the MII control register
-*
-* The contents of the PHY register containing the needed information need to
-* be passed in.
-******************************************************************************/
+/**
+ * e1000_config_mac_to_phy - sync phy and mac settings
+ * @hw: Struct containing variables accessed by shared code
+ * @mii_reg: data to write to the MII control register
+ *
+ * Sets MAC speed and duplex settings to reflect the those in the PHY
+ * The contents of the PHY register containing the needed information need to
+ * be passed in.
+ */
 static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
 {
-    u32 ctrl;
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_config_mac_to_phy");
-
-    /* 82544 or newer MAC, Auto Speed Detection takes care of
-    * MAC speed/duplex configuration.*/
-    if (hw->mac_type >= e1000_82544)
-        return E1000_SUCCESS;
-
-    /* Read the Device Control Register and set the bits to Force Speed
-     * and Duplex.
-     */
-    ctrl = er32(CTRL);
-    ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-    ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
-
-    /* Set up duplex in the Device Control and Transmit Control
-     * registers depending on negotiated values.
-     */
-    ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    if (phy_data & M88E1000_PSSR_DPLX)
-        ctrl |= E1000_CTRL_FD;
-    else
-        ctrl &= ~E1000_CTRL_FD;
-
-    e1000_config_collision_dist(hw);
-
-    /* Set up speed in the Device Control register depending on
-     * negotiated values.
-     */
-    if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
-        ctrl |= E1000_CTRL_SPD_1000;
-    else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
-        ctrl |= E1000_CTRL_SPD_100;
-
-    /* Write the configured values back to the Device Control Reg. */
-    ew32(CTRL, ctrl);
-    return E1000_SUCCESS;
+	u32 ctrl;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_config_mac_to_phy");
+
+	/* 82544 or newer MAC, Auto Speed Detection takes care of
+	 * MAC speed/duplex configuration.*/
+	if (hw->mac_type >= e1000_82544)
+		return E1000_SUCCESS;
+
+	/* Read the Device Control Register and set the bits to Force Speed
+	 * and Duplex.
+	 */
+	ctrl = er32(CTRL);
+	ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
+
+	/* Set up duplex in the Device Control and Transmit Control
+	 * registers depending on negotiated values.
+	 */
+	ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	if (phy_data & M88E1000_PSSR_DPLX)
+		ctrl |= E1000_CTRL_FD;
+	else
+		ctrl &= ~E1000_CTRL_FD;
+
+	e1000_config_collision_dist(hw);
+
+	/* Set up speed in the Device Control register depending on
+	 * negotiated values.
+	 */
+	if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+		ctrl |= E1000_CTRL_SPD_1000;
+	else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
+		ctrl |= E1000_CTRL_SPD_100;
+
+	/* Write the configured values back to the Device Control Reg. */
+	ew32(CTRL, ctrl);
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Forces the MAC's flow control settings.
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_force_mac_fc - force flow control settings
+ * @hw: Struct containing variables accessed by shared code
  *
+ * Forces the MAC's flow control settings.
  * Sets the TFCE and RFCE bits in the device control register to reflect
  * the adapter settings. TFCE and RFCE need to be explicitly set by
  * software when a Copper PHY is used because autonegotiation is managed
  * by the PHY rather than the MAC. Software must also configure these
  * bits when link is forced on a fiber connection.
- *****************************************************************************/
+ */
 s32 e1000_force_mac_fc(struct e1000_hw *hw)
 {
-    u32 ctrl;
-
-    DEBUGFUNC("e1000_force_mac_fc");
-
-    /* Get the current configuration of the Device Control Register */
-    ctrl = er32(CTRL);
-
-    /* Because we didn't get link via the internal auto-negotiation
-     * mechanism (we either forced link or we got link via PHY
-     * auto-neg), we have to manually enable/disable transmit an
-     * receive flow control.
-     *
-     * The "Case" statement below enables/disable flow control
-     * according to the "hw->fc" parameter.
-     *
-     * The possible values of the "fc" parameter are:
-     *      0:  Flow control is completely disabled
-     *      1:  Rx flow control is enabled (we can receive pause
-     *          frames but not send pause frames).
-     *      2:  Tx flow control is enabled (we can send pause frames
-     *          frames but we do not receive pause frames).
-     *      3:  Both Rx and TX flow control (symmetric) is enabled.
-     *  other:  No other values should be possible at this point.
-     */
-
-    switch (hw->fc) {
-    case E1000_FC_NONE:
-        ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
-        break;
-    case E1000_FC_RX_PAUSE:
-        ctrl &= (~E1000_CTRL_TFCE);
-        ctrl |= E1000_CTRL_RFCE;
-        break;
-    case E1000_FC_TX_PAUSE:
-        ctrl &= (~E1000_CTRL_RFCE);
-        ctrl |= E1000_CTRL_TFCE;
-        break;
-    case E1000_FC_FULL:
-        ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
-        break;
-    default:
-        DEBUGOUT("Flow control param set incorrectly\n");
-        return -E1000_ERR_CONFIG;
-    }
-
-    /* Disable TX Flow Control for 82542 (rev 2.0) */
-    if (hw->mac_type == e1000_82542_rev2_0)
-        ctrl &= (~E1000_CTRL_TFCE);
-
-    ew32(CTRL, ctrl);
-    return E1000_SUCCESS;
+	u32 ctrl;
+
+	DEBUGFUNC("e1000_force_mac_fc");
+
+	/* Get the current configuration of the Device Control Register */
+	ctrl = er32(CTRL);
+
+	/* Because we didn't get link via the internal auto-negotiation
+	 * mechanism (we either forced link or we got link via PHY
+	 * auto-neg), we have to manually enable/disable transmit an
+	 * receive flow control.
+	 *
+	 * The "Case" statement below enables/disable flow control
+	 * according to the "hw->fc" parameter.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause
+	 *          frames but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          frames but we do not receive pause frames).
+	 *      3:  Both Rx and TX flow control (symmetric) is enabled.
+	 *  other:  No other values should be possible at this point.
+	 */
+
+	switch (hw->fc) {
+	case E1000_FC_NONE:
+		ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+		break;
+	case E1000_FC_RX_PAUSE:
+		ctrl &= (~E1000_CTRL_TFCE);
+		ctrl |= E1000_CTRL_RFCE;
+		break;
+	case E1000_FC_TX_PAUSE:
+		ctrl &= (~E1000_CTRL_RFCE);
+		ctrl |= E1000_CTRL_TFCE;
+		break;
+	case E1000_FC_FULL:
+		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	/* Disable TX Flow Control for 82542 (rev 2.0) */
+	if (hw->mac_type == e1000_82542_rev2_0)
+		ctrl &= (~E1000_CTRL_TFCE);
+
+	ew32(CTRL, ctrl);
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Configures flow control settings after link is established
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_config_fc_after_link_up - configure flow control after autoneg
+ * @hw: Struct containing variables accessed by shared code
  *
+ * Configures flow control settings after link is established
  * Should be called immediately after a valid link has been established.
  * Forces MAC flow control settings if link was forced. When in MII/GMII mode
  * and autonegotiation is enabled, the MAC flow control settings will be set
  * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
- * and RFCE bits will be automaticaly set to the negotiated flow control mode.
- *****************************************************************************/
+ * and RFCE bits will be automatically set to the negotiated flow control mode.
+ */
 static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    u16 mii_status_reg;
-    u16 mii_nway_adv_reg;
-    u16 mii_nway_lp_ability_reg;
-    u16 speed;
-    u16 duplex;
-
-    DEBUGFUNC("e1000_config_fc_after_link_up");
-
-    /* Check for the case where we have fiber media and auto-neg failed
-     * so we had to force link.  In this case, we need to force the
-     * configuration of the MAC to match the "fc" parameter.
-     */
-    if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) ||
-        ((hw->media_type == e1000_media_type_internal_serdes) &&
-         (hw->autoneg_failed)) ||
-        ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) {
-        ret_val = e1000_force_mac_fc(hw);
-        if (ret_val) {
-            DEBUGOUT("Error forcing flow control settings\n");
-            return ret_val;
-        }
-    }
-
-    /* Check for the case where we have copper media and auto-neg is
-     * enabled.  In this case, we need to check and see if Auto-Neg
-     * has completed, and if so, how the PHY and link partner has
-     * flow control configured.
-     */
-    if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
-        /* Read the MII Status Register and check to see if AutoNeg
-         * has completed.  We read this twice because this reg has
-         * some "sticky" (latched) bits.
-         */
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if (ret_val)
-            return ret_val;
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if (ret_val)
-            return ret_val;
-
-        if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
-            /* The AutoNeg process has completed, so we now need to
-             * read both the Auto Negotiation Advertisement Register
-             * (Address 4) and the Auto_Negotiation Base Page Ability
-             * Register (Address 5) to determine how flow control was
-             * negotiated.
-             */
-            ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
-                                         &mii_nway_adv_reg);
-            if (ret_val)
-                return ret_val;
-            ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
-                                         &mii_nway_lp_ability_reg);
-            if (ret_val)
-                return ret_val;
-
-            /* Two bits in the Auto Negotiation Advertisement Register
-             * (Address 4) and two bits in the Auto Negotiation Base
-             * Page Ability Register (Address 5) determine flow control
-             * for both the PHY and the link partner.  The following
-             * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
-             * 1999, describes these PAUSE resolution bits and how flow
-             * control is determined based upon these settings.
-             * NOTE:  DC = Don't Care
-             *
-             *   LOCAL DEVICE  |   LINK PARTNER
-             * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
-             *-------|---------|-------|---------|--------------------
-             *   0   |    0    |  DC   |   DC    | E1000_FC_NONE
-             *   0   |    1    |   0   |   DC    | E1000_FC_NONE
-             *   0   |    1    |   1   |    0    | E1000_FC_NONE
-             *   0   |    1    |   1   |    1    | E1000_FC_TX_PAUSE
-             *   1   |    0    |   0   |   DC    | E1000_FC_NONE
-             *   1   |   DC    |   1   |   DC    | E1000_FC_FULL
-             *   1   |    1    |   0   |    0    | E1000_FC_NONE
-             *   1   |    1    |   0   |    1    | E1000_FC_RX_PAUSE
-             *
-             */
-            /* Are both PAUSE bits set to 1?  If so, this implies
-             * Symmetric Flow Control is enabled at both ends.  The
-             * ASM_DIR bits are irrelevant per the spec.
-             *
-             * For Symmetric Flow Control:
-             *
-             *   LOCAL DEVICE  |   LINK PARTNER
-             * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-             *-------|---------|-------|---------|--------------------
-             *   1   |   DC    |   1   |   DC    | E1000_FC_FULL
-             *
-             */
-            if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-                (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
-                /* Now we need to check if the user selected RX ONLY
-                 * of pause frames.  In this case, we had to advertise
-                 * FULL flow control because we could not advertise RX
-                 * ONLY. Hence, we must now check to see if we need to
-                 * turn OFF  the TRANSMISSION of PAUSE frames.
-                 */
-                if (hw->original_fc == E1000_FC_FULL) {
-                    hw->fc = E1000_FC_FULL;
-                    DEBUGOUT("Flow Control = FULL.\n");
-                } else {
-                    hw->fc = E1000_FC_RX_PAUSE;
-                    DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
-                }
-            }
-            /* For receiving PAUSE frames ONLY.
-             *
-             *   LOCAL DEVICE  |   LINK PARTNER
-             * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-             *-------|---------|-------|---------|--------------------
-             *   0   |    1    |   1   |    1    | E1000_FC_TX_PAUSE
-             *
-             */
-            else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-                     (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-                     (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-                     (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-                hw->fc = E1000_FC_TX_PAUSE;
-                DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
-            }
-            /* For transmitting PAUSE frames ONLY.
-             *
-             *   LOCAL DEVICE  |   LINK PARTNER
-             * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-             *-------|---------|-------|---------|--------------------
-             *   1   |    1    |   0   |    1    | E1000_FC_RX_PAUSE
-             *
-             */
-            else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-                     (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-                     !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-                     (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-                hw->fc = E1000_FC_RX_PAUSE;
-                DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
-            }
-            /* Per the IEEE spec, at this point flow control should be
-             * disabled.  However, we want to consider that we could
-             * be connected to a legacy switch that doesn't advertise
-             * desired flow control, but can be forced on the link
-             * partner.  So if we advertised no flow control, that is
-             * what we will resolve to.  If we advertised some kind of
-             * receive capability (Rx Pause Only or Full Flow Control)
-             * and the link partner advertised none, we will configure
-             * ourselves to enable Rx Flow Control only.  We can do
-             * this safely for two reasons:  If the link partner really
-             * didn't want flow control enabled, and we enable Rx, no
-             * harm done since we won't be receiving any PAUSE frames
-             * anyway.  If the intent on the link partner was to have
-             * flow control enabled, then by us enabling RX only, we
-             * can at least receive pause frames and process them.
-             * This is a good idea because in most cases, since we are
-             * predominantly a server NIC, more times than not we will
-             * be asked to delay transmission of packets than asking
-             * our link partner to pause transmission of frames.
-             */
-            else if ((hw->original_fc == E1000_FC_NONE ||
-                      hw->original_fc == E1000_FC_TX_PAUSE) ||
-                      hw->fc_strict_ieee) {
-                hw->fc = E1000_FC_NONE;
-                DEBUGOUT("Flow Control = NONE.\n");
-            } else {
-                hw->fc = E1000_FC_RX_PAUSE;
-                DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
-            }
-
-            /* Now we need to do one last check...  If we auto-
-             * negotiated to HALF DUPLEX, flow control should not be
-             * enabled per IEEE 802.3 spec.
-             */
-            ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
-            if (ret_val) {
-                DEBUGOUT("Error getting link speed and duplex\n");
-                return ret_val;
-            }
-
-            if (duplex == HALF_DUPLEX)
-                hw->fc = E1000_FC_NONE;
-
-            /* Now we call a subroutine to actually force the MAC
-             * controller to use the correct flow control settings.
-             */
-            ret_val = e1000_force_mac_fc(hw);
-            if (ret_val) {
-                DEBUGOUT("Error forcing flow control settings\n");
-                return ret_val;
-            }
-        } else {
-            DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
-        }
-    }
-    return E1000_SUCCESS;
+	s32 ret_val;
+	u16 mii_status_reg;
+	u16 mii_nway_adv_reg;
+	u16 mii_nway_lp_ability_reg;
+	u16 speed;
+	u16 duplex;
+
+	DEBUGFUNC("e1000_config_fc_after_link_up");
+
+	/* Check for the case where we have fiber media and auto-neg failed
+	 * so we had to force link.  In this case, we need to force the
+	 * configuration of the MAC to match the "fc" parameter.
+	 */
+	if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed))
+	    || ((hw->media_type == e1000_media_type_internal_serdes)
+		&& (hw->autoneg_failed))
+	    || ((hw->media_type == e1000_media_type_copper)
+		&& (!hw->autoneg))) {
+		ret_val = e1000_force_mac_fc(hw);
+		if (ret_val) {
+			DEBUGOUT("Error forcing flow control settings\n");
+			return ret_val;
+		}
+	}
+
+	/* Check for the case where we have copper media and auto-neg is
+	 * enabled.  In this case, we need to check and see if Auto-Neg
+	 * has completed, and if so, how the PHY and link partner has
+	 * flow control configured.
+	 */
+	if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
+		/* Read the MII Status Register and check to see if AutoNeg
+		 * has completed.  We read this twice because this reg has
+		 * some "sticky" (latched) bits.
+		 */
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+
+		if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
+			/* The AutoNeg process has completed, so we now need to
+			 * read both the Auto Negotiation Advertisement Register
+			 * (Address 4) and the Auto_Negotiation Base Page Ability
+			 * Register (Address 5) to determine how flow control was
+			 * negotiated.
+			 */
+			ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
+						     &mii_nway_adv_reg);
+			if (ret_val)
+				return ret_val;
+			ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
+						     &mii_nway_lp_ability_reg);
+			if (ret_val)
+				return ret_val;
+
+			/* Two bits in the Auto Negotiation Advertisement Register
+			 * (Address 4) and two bits in the Auto Negotiation Base
+			 * Page Ability Register (Address 5) determine flow control
+			 * for both the PHY and the link partner.  The following
+			 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+			 * 1999, describes these PAUSE resolution bits and how flow
+			 * control is determined based upon these settings.
+			 * NOTE:  DC = Don't Care
+			 *
+			 *   LOCAL DEVICE  |   LINK PARTNER
+			 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+			 *-------|---------|-------|---------|--------------------
+			 *   0   |    0    |  DC   |   DC    | E1000_FC_NONE
+			 *   0   |    1    |   0   |   DC    | E1000_FC_NONE
+			 *   0   |    1    |   1   |    0    | E1000_FC_NONE
+			 *   0   |    1    |   1   |    1    | E1000_FC_TX_PAUSE
+			 *   1   |    0    |   0   |   DC    | E1000_FC_NONE
+			 *   1   |   DC    |   1   |   DC    | E1000_FC_FULL
+			 *   1   |    1    |   0   |    0    | E1000_FC_NONE
+			 *   1   |    1    |   0   |    1    | E1000_FC_RX_PAUSE
+			 *
+			 */
+			/* Are both PAUSE bits set to 1?  If so, this implies
+			 * Symmetric Flow Control is enabled at both ends.  The
+			 * ASM_DIR bits are irrelevant per the spec.
+			 *
+			 * For Symmetric Flow Control:
+			 *
+			 *   LOCAL DEVICE  |   LINK PARTNER
+			 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+			 *-------|---------|-------|---------|--------------------
+			 *   1   |   DC    |   1   |   DC    | E1000_FC_FULL
+			 *
+			 */
+			if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+			    (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+				/* Now we need to check if the user selected RX ONLY
+				 * of pause frames.  In this case, we had to advertise
+				 * FULL flow control because we could not advertise RX
+				 * ONLY. Hence, we must now check to see if we need to
+				 * turn OFF  the TRANSMISSION of PAUSE frames.
+				 */
+				if (hw->original_fc == E1000_FC_FULL) {
+					hw->fc = E1000_FC_FULL;
+					DEBUGOUT("Flow Control = FULL.\n");
+				} else {
+					hw->fc = E1000_FC_RX_PAUSE;
+					DEBUGOUT
+					    ("Flow Control = RX PAUSE frames only.\n");
+				}
+			}
+			/* For receiving PAUSE frames ONLY.
+			 *
+			 *   LOCAL DEVICE  |   LINK PARTNER
+			 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+			 *-------|---------|-------|---------|--------------------
+			 *   0   |    1    |   1   |    1    | E1000_FC_TX_PAUSE
+			 *
+			 */
+			else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+				 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+				 (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+				 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+			{
+				hw->fc = E1000_FC_TX_PAUSE;
+				DEBUGOUT
+				    ("Flow Control = TX PAUSE frames only.\n");
+			}
+			/* For transmitting PAUSE frames ONLY.
+			 *
+			 *   LOCAL DEVICE  |   LINK PARTNER
+			 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+			 *-------|---------|-------|---------|--------------------
+			 *   1   |    1    |   0   |    1    | E1000_FC_RX_PAUSE
+			 *
+			 */
+			else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+				 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+				 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+				 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+			{
+				hw->fc = E1000_FC_RX_PAUSE;
+				DEBUGOUT
+				    ("Flow Control = RX PAUSE frames only.\n");
+			}
+			/* Per the IEEE spec, at this point flow control should be
+			 * disabled.  However, we want to consider that we could
+			 * be connected to a legacy switch that doesn't advertise
+			 * desired flow control, but can be forced on the link
+			 * partner.  So if we advertised no flow control, that is
+			 * what we will resolve to.  If we advertised some kind of
+			 * receive capability (Rx Pause Only or Full Flow Control)
+			 * and the link partner advertised none, we will configure
+			 * ourselves to enable Rx Flow Control only.  We can do
+			 * this safely for two reasons:  If the link partner really
+			 * didn't want flow control enabled, and we enable Rx, no
+			 * harm done since we won't be receiving any PAUSE frames
+			 * anyway.  If the intent on the link partner was to have
+			 * flow control enabled, then by us enabling RX only, we
+			 * can at least receive pause frames and process them.
+			 * This is a good idea because in most cases, since we are
+			 * predominantly a server NIC, more times than not we will
+			 * be asked to delay transmission of packets than asking
+			 * our link partner to pause transmission of frames.
+			 */
+			else if ((hw->original_fc == E1000_FC_NONE ||
+				  hw->original_fc == E1000_FC_TX_PAUSE) ||
+				 hw->fc_strict_ieee) {
+				hw->fc = E1000_FC_NONE;
+				DEBUGOUT("Flow Control = NONE.\n");
+			} else {
+				hw->fc = E1000_FC_RX_PAUSE;
+				DEBUGOUT
+				    ("Flow Control = RX PAUSE frames only.\n");
+			}
+
+			/* Now we need to do one last check...  If we auto-
+			 * negotiated to HALF DUPLEX, flow control should not be
+			 * enabled per IEEE 802.3 spec.
+			 */
+			ret_val =
+			    e1000_get_speed_and_duplex(hw, &speed, &duplex);
+			if (ret_val) {
+				DEBUGOUT
+				    ("Error getting link speed and duplex\n");
+				return ret_val;
+			}
+
+			if (duplex == HALF_DUPLEX)
+				hw->fc = E1000_FC_NONE;
+
+			/* Now we call a subroutine to actually force the MAC
+			 * controller to use the correct flow control settings.
+			 */
+			ret_val = e1000_force_mac_fc(hw);
+			if (ret_val) {
+				DEBUGOUT
+				    ("Error forcing flow control settings\n");
+				return ret_val;
+			}
+		} else {
+			DEBUGOUT
+			    ("Copper PHY and Auto Neg has not completed.\n");
+		}
+	}
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Checks to see if the link status of the hardware has changed.
+/**
+ * e1000_check_for_serdes_link_generic - Check for link (Serdes)
+ * @hw: pointer to the HW structure
  *
- * hw - Struct containing variables accessed by shared code
+ * Checks for link up on the hardware.  If link is not up and we have
+ * a signal, then we need to force link up.
+ */
+static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
+{
+	u32 rxcw;
+	u32 ctrl;
+	u32 status;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_check_for_serdes_link_generic");
+
+	ctrl = er32(CTRL);
+	status = er32(STATUS);
+	rxcw = er32(RXCW);
+
+	/*
+	 * If we don't have link (auto-negotiation failed or link partner
+	 * cannot auto-negotiate), and our link partner is not trying to
+	 * auto-negotiate with us (we are receiving idles or data),
+	 * we need to force link up. We also need to give auto-negotiation
+	 * time to complete.
+	 */
+	/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+	if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
+		if (hw->autoneg_failed == 0) {
+			hw->autoneg_failed = 1;
+			goto out;
+		}
+		DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
+
+		/* Disable auto-negotiation in the TXCW register */
+		ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
+
+		/* Force link-up and also force full-duplex. */
+		ctrl = er32(CTRL);
+		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+		ew32(CTRL, ctrl);
+
+		/* Configure Flow Control after forcing link up. */
+		ret_val = e1000_config_fc_after_link_up(hw);
+		if (ret_val) {
+			DEBUGOUT("Error configuring flow control\n");
+			goto out;
+		}
+	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+		/*
+		 * If we are forcing link and we are receiving /C/ ordered
+		 * sets, re-enable auto-negotiation in the TXCW register
+		 * and disable forced link in the Device Control register
+		 * in an attempt to auto-negotiate with our link partner.
+		 */
+		DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
+		ew32(TXCW, hw->txcw);
+		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+		hw->serdes_has_link = true;
+	} else if (!(E1000_TXCW_ANE & er32(TXCW))) {
+		/*
+		 * If we force link for non-auto-negotiation switch, check
+		 * link status based on MAC synchronization for internal
+		 * serdes media type.
+		 */
+		/* SYNCH bit and IV bit are sticky. */
+		udelay(10);
+		rxcw = er32(RXCW);
+		if (rxcw & E1000_RXCW_SYNCH) {
+			if (!(rxcw & E1000_RXCW_IV)) {
+				hw->serdes_has_link = true;
+				DEBUGOUT("SERDES: Link up - forced.\n");
+			}
+		} else {
+			hw->serdes_has_link = false;
+			DEBUGOUT("SERDES: Link down - force failed.\n");
+		}
+	}
+
+	if (E1000_TXCW_ANE & er32(TXCW)) {
+		status = er32(STATUS);
+		if (status & E1000_STATUS_LU) {
+			/* SYNCH bit and IV bit are sticky, so reread rxcw. */
+			udelay(10);
+			rxcw = er32(RXCW);
+			if (rxcw & E1000_RXCW_SYNCH) {
+				if (!(rxcw & E1000_RXCW_IV)) {
+					hw->serdes_has_link = true;
+					DEBUGOUT("SERDES: Link up - autoneg "
+						 "completed successfully.\n");
+				} else {
+					hw->serdes_has_link = false;
+					DEBUGOUT("SERDES: Link down - invalid"
+						 "codewords detected in autoneg.\n");
+				}
+			} else {
+				hw->serdes_has_link = false;
+				DEBUGOUT("SERDES: Link down - no sync.\n");
+			}
+		} else {
+			hw->serdes_has_link = false;
+			DEBUGOUT("SERDES: Link down - autoneg failed\n");
+		}
+	}
+
+      out:
+	return ret_val;
+}
+
+/**
+ * e1000_check_for_link
+ * @hw: Struct containing variables accessed by shared code
  *
+ * Checks to see if the link status of the hardware has changed.
  * Called by any function that needs to check the link status of the adapter.
- *****************************************************************************/
+ */
 s32 e1000_check_for_link(struct e1000_hw *hw)
 {
-    u32 rxcw = 0;
-    u32 ctrl;
-    u32 status;
-    u32 rctl;
-    u32 icr;
-    u32 signal = 0;
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_check_for_link");
-
-    ctrl = er32(CTRL);
-    status = er32(STATUS);
-
-    /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be
-     * set when the optics detect a signal. On older adapters, it will be
-     * cleared when there is a signal.  This applies to fiber media only.
-     */
-    if ((hw->media_type == e1000_media_type_fiber) ||
-        (hw->media_type == e1000_media_type_internal_serdes)) {
-        rxcw = er32(RXCW);
-
-        if (hw->media_type == e1000_media_type_fiber) {
-            signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
-            if (status & E1000_STATUS_LU)
-                hw->get_link_status = false;
-        }
-    }
-
-    /* If we have a copper PHY then we only want to go out to the PHY
-     * registers to see if Auto-Neg has completed and/or if our link
-     * status has changed.  The get_link_status flag will be set if we
-     * receive a Link Status Change interrupt or we have Rx Sequence
-     * Errors.
-     */
-    if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
-        /* First we want to see if the MII Status Register reports
-         * link.  If so, then we want to get the current speed/duplex
-         * of the PHY.
-         * Read the register twice since the link bit is sticky.
-         */
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if (ret_val)
-            return ret_val;
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        if (phy_data & MII_SR_LINK_STATUS) {
-            hw->get_link_status = false;
-            /* Check if there was DownShift, must be checked immediately after
-             * link-up */
-            e1000_check_downshift(hw);
-
-            /* If we are on 82544 or 82543 silicon and speed/duplex
-             * are forced to 10H or 10F, then we will implement the polarity
-             * reversal workaround.  We disable interrupts first, and upon
-             * returning, place the devices interrupt state to its previous
-             * value except for the link status change interrupt which will
-             * happen due to the execution of this workaround.
-             */
-
-            if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
-                (!hw->autoneg) &&
-                (hw->forced_speed_duplex == e1000_10_full ||
-                 hw->forced_speed_duplex == e1000_10_half)) {
-                ew32(IMC, 0xffffffff);
-                ret_val = e1000_polarity_reversal_workaround(hw);
-                icr = er32(ICR);
-                ew32(ICS, (icr & ~E1000_ICS_LSC));
-                ew32(IMS, IMS_ENABLE_MASK);
-            }
-
-        } else {
-            /* No link detected */
-            e1000_config_dsp_after_link_change(hw, false);
-            return 0;
-        }
-
-        /* If we are forcing speed/duplex, then we simply return since
-         * we have already determined whether we have link or not.
-         */
-        if (!hw->autoneg) return -E1000_ERR_CONFIG;
-
-        /* optimize the dsp settings for the igp phy */
-        e1000_config_dsp_after_link_change(hw, true);
-
-        /* We have a M88E1000 PHY and Auto-Neg is enabled.  If we
-         * have Si on board that is 82544 or newer, Auto
-         * Speed Detection takes care of MAC speed/duplex
-         * configuration.  So we only need to configure Collision
-         * Distance in the MAC.  Otherwise, we need to force
-         * speed/duplex on the MAC to the current PHY speed/duplex
-         * settings.
-         */
-        if (hw->mac_type >= e1000_82544)
-            e1000_config_collision_dist(hw);
-        else {
-            ret_val = e1000_config_mac_to_phy(hw);
-            if (ret_val) {
-                DEBUGOUT("Error configuring MAC to PHY settings\n");
-                return ret_val;
-            }
-        }
-
-        /* Configure Flow Control now that Auto-Neg has completed. First, we
-         * need to restore the desired flow control settings because we may
-         * have had to re-autoneg with a different link partner.
-         */
-        ret_val = e1000_config_fc_after_link_up(hw);
-        if (ret_val) {
-            DEBUGOUT("Error configuring flow control\n");
-            return ret_val;
-        }
-
-        /* At this point we know that we are on copper and we have
-         * auto-negotiated link.  These are conditions for checking the link
-         * partner capability register.  We use the link speed to determine if
-         * TBI compatibility needs to be turned on or off.  If the link is not
-         * at gigabit speed, then TBI compatibility is not needed.  If we are
-         * at gigabit speed, we turn on TBI compatibility.
-         */
-        if (hw->tbi_compatibility_en) {
-            u16 speed, duplex;
-            ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
-            if (ret_val) {
-                DEBUGOUT("Error getting link speed and duplex\n");
-                return ret_val;
-            }
-            if (speed != SPEED_1000) {
-                /* If link speed is not set to gigabit speed, we do not need
-                 * to enable TBI compatibility.
-                 */
-                if (hw->tbi_compatibility_on) {
-                    /* If we previously were in the mode, turn it off. */
-                    rctl = er32(RCTL);
-                    rctl &= ~E1000_RCTL_SBP;
-                    ew32(RCTL, rctl);
-                    hw->tbi_compatibility_on = false;
-                }
-            } else {
-                /* If TBI compatibility is was previously off, turn it on. For
-                 * compatibility with a TBI link partner, we will store bad
-                 * packets. Some frames have an additional byte on the end and
-                 * will look like CRC errors to the hardware.
-                 */
-                if (!hw->tbi_compatibility_on) {
-                    hw->tbi_compatibility_on = true;
-                    rctl = er32(RCTL);
-                    rctl |= E1000_RCTL_SBP;
-                    ew32(RCTL, rctl);
-                }
-            }
-        }
-    }
-    /* If we don't have link (auto-negotiation failed or link partner cannot
-     * auto-negotiate), the cable is plugged in (we have signal), and our
-     * link partner is not trying to auto-negotiate with us (we are receiving
-     * idles or data), we need to force link up. We also need to give
-     * auto-negotiation time to complete, in case the cable was just plugged
-     * in. The autoneg_failed flag does this.
-     */
-    else if ((((hw->media_type == e1000_media_type_fiber) &&
-              ((ctrl & E1000_CTRL_SWDPIN1) == signal)) ||
-              (hw->media_type == e1000_media_type_internal_serdes)) &&
-              (!(status & E1000_STATUS_LU)) &&
-              (!(rxcw & E1000_RXCW_C))) {
-        if (hw->autoneg_failed == 0) {
-            hw->autoneg_failed = 1;
-            return 0;
-        }
-        DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
-
-        /* Disable auto-negotiation in the TXCW register */
-        ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
-
-        /* Force link-up and also force full-duplex. */
-        ctrl = er32(CTRL);
-        ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
-        ew32(CTRL, ctrl);
-
-        /* Configure Flow Control after forcing link up. */
-        ret_val = e1000_config_fc_after_link_up(hw);
-        if (ret_val) {
-            DEBUGOUT("Error configuring flow control\n");
-            return ret_val;
-        }
-    }
-    /* If we are forcing link and we are receiving /C/ ordered sets, re-enable
-     * auto-negotiation in the TXCW register and disable forced link in the
-     * Device Control register in an attempt to auto-negotiate with our link
-     * partner.
-     */
-    else if (((hw->media_type == e1000_media_type_fiber) ||
-              (hw->media_type == e1000_media_type_internal_serdes)) &&
-              (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
-        DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
-        ew32(TXCW, hw->txcw);
-        ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
-
-        hw->serdes_link_down = false;
-    }
-    /* If we force link for non-auto-negotiation switch, check link status
-     * based on MAC synchronization for internal serdes media type.
-     */
-    else if ((hw->media_type == e1000_media_type_internal_serdes) &&
-             !(E1000_TXCW_ANE & er32(TXCW))) {
-        /* SYNCH bit and IV bit are sticky. */
-        udelay(10);
-        if (E1000_RXCW_SYNCH & er32(RXCW)) {
-            if (!(rxcw & E1000_RXCW_IV)) {
-                hw->serdes_link_down = false;
-                DEBUGOUT("SERDES: Link is up.\n");
-            }
-        } else {
-            hw->serdes_link_down = true;
-            DEBUGOUT("SERDES: Link is down.\n");
-        }
-    }
-    if ((hw->media_type == e1000_media_type_internal_serdes) &&
-        (E1000_TXCW_ANE & er32(TXCW))) {
-        hw->serdes_link_down = !(E1000_STATUS_LU & er32(STATUS));
-    }
-    return E1000_SUCCESS;
+	u32 rxcw = 0;
+	u32 ctrl;
+	u32 status;
+	u32 rctl;
+	u32 icr;
+	u32 signal = 0;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_check_for_link");
+
+	ctrl = er32(CTRL);
+	status = er32(STATUS);
+
+	/* On adapters with a MAC newer than 82544, SW Definable pin 1 will be
+	 * set when the optics detect a signal. On older adapters, it will be
+	 * cleared when there is a signal.  This applies to fiber media only.
+	 */
+	if ((hw->media_type == e1000_media_type_fiber) ||
+	    (hw->media_type == e1000_media_type_internal_serdes)) {
+		rxcw = er32(RXCW);
+
+		if (hw->media_type == e1000_media_type_fiber) {
+			signal =
+			    (hw->mac_type >
+			     e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+			if (status & E1000_STATUS_LU)
+				hw->get_link_status = false;
+		}
+	}
+
+	/* If we have a copper PHY then we only want to go out to the PHY
+	 * registers to see if Auto-Neg has completed and/or if our link
+	 * status has changed.  The get_link_status flag will be set if we
+	 * receive a Link Status Change interrupt or we have Rx Sequence
+	 * Errors.
+	 */
+	if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
+		/* First we want to see if the MII Status Register reports
+		 * link.  If so, then we want to get the current speed/duplex
+		 * of the PHY.
+		 * Read the register twice since the link bit is sticky.
+		 */
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		if (phy_data & MII_SR_LINK_STATUS) {
+			hw->get_link_status = false;
+			/* Check if there was DownShift, must be checked immediately after
+			 * link-up */
+			e1000_check_downshift(hw);
+
+			/* If we are on 82544 or 82543 silicon and speed/duplex
+			 * are forced to 10H or 10F, then we will implement the polarity
+			 * reversal workaround.  We disable interrupts first, and upon
+			 * returning, place the devices interrupt state to its previous
+			 * value except for the link status change interrupt which will
+			 * happen due to the execution of this workaround.
+			 */
+
+			if ((hw->mac_type == e1000_82544
+			     || hw->mac_type == e1000_82543) && (!hw->autoneg)
+			    && (hw->forced_speed_duplex == e1000_10_full
+				|| hw->forced_speed_duplex == e1000_10_half)) {
+				ew32(IMC, 0xffffffff);
+				ret_val =
+				    e1000_polarity_reversal_workaround(hw);
+				icr = er32(ICR);
+				ew32(ICS, (icr & ~E1000_ICS_LSC));
+				ew32(IMS, IMS_ENABLE_MASK);
+			}
+
+		} else {
+			/* No link detected */
+			e1000_config_dsp_after_link_change(hw, false);
+			return 0;
+		}
+
+		/* If we are forcing speed/duplex, then we simply return since
+		 * we have already determined whether we have link or not.
+		 */
+		if (!hw->autoneg)
+			return -E1000_ERR_CONFIG;
+
+		/* optimize the dsp settings for the igp phy */
+		e1000_config_dsp_after_link_change(hw, true);
+
+		/* We have a M88E1000 PHY and Auto-Neg is enabled.  If we
+		 * have Si on board that is 82544 or newer, Auto
+		 * Speed Detection takes care of MAC speed/duplex
+		 * configuration.  So we only need to configure Collision
+		 * Distance in the MAC.  Otherwise, we need to force
+		 * speed/duplex on the MAC to the current PHY speed/duplex
+		 * settings.
+		 */
+		if (hw->mac_type >= e1000_82544)
+			e1000_config_collision_dist(hw);
+		else {
+			ret_val = e1000_config_mac_to_phy(hw);
+			if (ret_val) {
+				DEBUGOUT
+				    ("Error configuring MAC to PHY settings\n");
+				return ret_val;
+			}
+		}
+
+		/* Configure Flow Control now that Auto-Neg has completed. First, we
+		 * need to restore the desired flow control settings because we may
+		 * have had to re-autoneg with a different link partner.
+		 */
+		ret_val = e1000_config_fc_after_link_up(hw);
+		if (ret_val) {
+			DEBUGOUT("Error configuring flow control\n");
+			return ret_val;
+		}
+
+		/* At this point we know that we are on copper and we have
+		 * auto-negotiated link.  These are conditions for checking the link
+		 * partner capability register.  We use the link speed to determine if
+		 * TBI compatibility needs to be turned on or off.  If the link is not
+		 * at gigabit speed, then TBI compatibility is not needed.  If we are
+		 * at gigabit speed, we turn on TBI compatibility.
+		 */
+		if (hw->tbi_compatibility_en) {
+			u16 speed, duplex;
+			ret_val =
+			    e1000_get_speed_and_duplex(hw, &speed, &duplex);
+			if (ret_val) {
+				DEBUGOUT
+				    ("Error getting link speed and duplex\n");
+				return ret_val;
+			}
+			if (speed != SPEED_1000) {
+				/* If link speed is not set to gigabit speed, we do not need
+				 * to enable TBI compatibility.
+				 */
+				if (hw->tbi_compatibility_on) {
+					/* If we previously were in the mode, turn it off. */
+					rctl = er32(RCTL);
+					rctl &= ~E1000_RCTL_SBP;
+					ew32(RCTL, rctl);
+					hw->tbi_compatibility_on = false;
+				}
+			} else {
+				/* If TBI compatibility is was previously off, turn it on. For
+				 * compatibility with a TBI link partner, we will store bad
+				 * packets. Some frames have an additional byte on the end and
+				 * will look like CRC errors to to the hardware.
+				 */
+				if (!hw->tbi_compatibility_on) {
+					hw->tbi_compatibility_on = true;
+					rctl = er32(RCTL);
+					rctl |= E1000_RCTL_SBP;
+					ew32(RCTL, rctl);
+				}
+			}
+		}
+	}
+
+	if ((hw->media_type == e1000_media_type_fiber) ||
+	    (hw->media_type == e1000_media_type_internal_serdes))
+		e1000_check_for_serdes_link_generic(hw);
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
+/**
+ * e1000_get_speed_and_duplex
+ * @hw: Struct containing variables accessed by shared code
+ * @speed: Speed of the connection
+ * @duplex: Duplex setting of the connection
+
  * Detects the current speed and duplex settings of the hardware.
- *
- * hw - Struct containing variables accessed by shared code
- * speed - Speed of the connection
- * duplex - Duplex setting of the connection
- *****************************************************************************/
+ */
 s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
 {
-    u32 status;
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_get_speed_and_duplex");
-
-    if (hw->mac_type >= e1000_82543) {
-        status = er32(STATUS);
-        if (status & E1000_STATUS_SPEED_1000) {
-            *speed = SPEED_1000;
-            DEBUGOUT("1000 Mbs, ");
-        } else if (status & E1000_STATUS_SPEED_100) {
-            *speed = SPEED_100;
-            DEBUGOUT("100 Mbs, ");
-        } else {
-            *speed = SPEED_10;
-            DEBUGOUT("10 Mbs, ");
-        }
-
-        if (status & E1000_STATUS_FD) {
-            *duplex = FULL_DUPLEX;
-            DEBUGOUT("Full Duplex\n");
-        } else {
-            *duplex = HALF_DUPLEX;
-            DEBUGOUT(" Half Duplex\n");
-        }
-    } else {
-        DEBUGOUT("1000 Mbs, Full Duplex\n");
-        *speed = SPEED_1000;
-        *duplex = FULL_DUPLEX;
-    }
-
-    /* IGP01 PHY may advertise full duplex operation after speed downgrade even
-     * if it is operating at half duplex.  Here we set the duplex settings to
-     * match the duplex in the link partner's capabilities.
-     */
-    if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
-        ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
-            *duplex = HALF_DUPLEX;
-        else {
-            ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
-            if (ret_val)
-                return ret_val;
-            if ((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) ||
-               (*speed == SPEED_10 && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
-                *duplex = HALF_DUPLEX;
-        }
-    }
-
-    if ((hw->mac_type == e1000_80003es2lan) &&
-        (hw->media_type == e1000_media_type_copper)) {
-        if (*speed == SPEED_1000)
-            ret_val = e1000_configure_kmrn_for_1000(hw);
-        else
-            ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex);
-        if (ret_val)
-            return ret_val;
-    }
-
-    if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
-        ret_val = e1000_kumeran_lock_loss_workaround(hw);
-        if (ret_val)
-            return ret_val;
-    }
-
-    return E1000_SUCCESS;
+	u32 status;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_get_speed_and_duplex");
+
+	if (hw->mac_type >= e1000_82543) {
+		status = er32(STATUS);
+		if (status & E1000_STATUS_SPEED_1000) {
+			*speed = SPEED_1000;
+			DEBUGOUT("1000 Mbs, ");
+		} else if (status & E1000_STATUS_SPEED_100) {
+			*speed = SPEED_100;
+			DEBUGOUT("100 Mbs, ");
+		} else {
+			*speed = SPEED_10;
+			DEBUGOUT("10 Mbs, ");
+		}
+
+		if (status & E1000_STATUS_FD) {
+			*duplex = FULL_DUPLEX;
+			DEBUGOUT("Full Duplex\n");
+		} else {
+			*duplex = HALF_DUPLEX;
+			DEBUGOUT(" Half Duplex\n");
+		}
+	} else {
+		DEBUGOUT("1000 Mbs, Full Duplex\n");
+		*speed = SPEED_1000;
+		*duplex = FULL_DUPLEX;
+	}
+
+	/* IGP01 PHY may advertise full duplex operation after speed downgrade even
+	 * if it is operating at half duplex.  Here we set the duplex settings to
+	 * match the duplex in the link partner's capabilities.
+	 */
+	if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
+		ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
+			*duplex = HALF_DUPLEX;
+		else {
+			ret_val =
+			    e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
+			if (ret_val)
+				return ret_val;
+			if ((*speed == SPEED_100
+			     && !(phy_data & NWAY_LPAR_100TX_FD_CAPS))
+			    || (*speed == SPEED_10
+				&& !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
+				*duplex = HALF_DUPLEX;
+		}
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Blocks until autoneg completes or times out (~4.5 seconds)
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
+/**
+ * e1000_wait_autoneg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Blocks until autoneg completes or times out (~4.5 seconds)
+ */
 static s32 e1000_wait_autoneg(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    u16 i;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_wait_autoneg");
-    DEBUGOUT("Waiting for Auto-Neg to complete.\n");
-
-    /* We will wait for autoneg to complete or 4.5 seconds to expire. */
-    for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
-        /* Read the MII Status Register and wait for Auto-Neg
-         * Complete bit to be set.
-         */
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if (ret_val)
-            return ret_val;
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if (ret_val)
-            return ret_val;
-        if (phy_data & MII_SR_AUTONEG_COMPLETE) {
-            return E1000_SUCCESS;
-        }
-        msleep(100);
-    }
-    return E1000_SUCCESS;
+	s32 ret_val;
+	u16 i;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_wait_autoneg");
+	DEBUGOUT("Waiting for Auto-Neg to complete.\n");
+
+	/* We will wait for autoneg to complete or 4.5 seconds to expire. */
+	for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
+		/* Read the MII Status Register and wait for Auto-Neg
+		 * Complete bit to be set.
+		 */
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+		if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+			return E1000_SUCCESS;
+		}
+		msleep(100);
+	}
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Raises the Management Data Clock
-*
-* hw - Struct containing variables accessed by shared code
-* ctrl - Device control register's current value
-******************************************************************************/
+/**
+ * e1000_raise_mdi_clk - Raises the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
 static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
 {
-    /* Raise the clock input to the Management Data Clock (by setting the MDC
-     * bit), and then delay 10 microseconds.
-     */
-    ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
-    E1000_WRITE_FLUSH();
-    udelay(10);
+	/* Raise the clock input to the Management Data Clock (by setting the MDC
+	 * bit), and then delay 10 microseconds.
+	 */
+	ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
+	E1000_WRITE_FLUSH();
+	udelay(10);
 }
 
-/******************************************************************************
-* Lowers the Management Data Clock
-*
-* hw - Struct containing variables accessed by shared code
-* ctrl - Device control register's current value
-******************************************************************************/
+/**
+ * e1000_lower_mdi_clk - Lowers the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
 static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
 {
-    /* Lower the clock input to the Management Data Clock (by clearing the MDC
-     * bit), and then delay 10 microseconds.
-     */
-    ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
-    E1000_WRITE_FLUSH();
-    udelay(10);
+	/* Lower the clock input to the Management Data Clock (by clearing the MDC
+	 * bit), and then delay 10 microseconds.
+	 */
+	ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
+	E1000_WRITE_FLUSH();
+	udelay(10);
 }
 
-/******************************************************************************
-* Shifts data bits out to the PHY
-*
-* hw - Struct containing variables accessed by shared code
-* data - Data to send out to the PHY
-* count - Number of bits to shift out
-*
-* Bits are shifted out in MSB to LSB order.
-******************************************************************************/
+/**
+ * e1000_shift_out_mdi_bits - Shifts data bits out to the PHY
+ * @hw: Struct containing variables accessed by shared code
+ * @data: Data to send out to the PHY
+ * @count: Number of bits to shift out
+ *
+ * Bits are shifted out in MSB to LSB order.
+ */
 static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
 {
-    u32 ctrl;
-    u32 mask;
-
-    /* We need to shift "count" number of bits out to the PHY. So, the value
-     * in the "data" parameter will be shifted out to the PHY one bit at a
-     * time. In order to do this, "data" must be broken down into bits.
-     */
-    mask = 0x01;
-    mask <<= (count - 1);
-
-    ctrl = er32(CTRL);
-
-    /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
-    ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
-
-    while (mask) {
-        /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
-         * then raising and lowering the Management Data Clock. A "0" is
-         * shifted out to the PHY by setting the MDIO bit to "0" and then
-         * raising and lowering the clock.
-         */
-        if (data & mask)
-            ctrl |= E1000_CTRL_MDIO;
-        else
-            ctrl &= ~E1000_CTRL_MDIO;
-
-        ew32(CTRL, ctrl);
-        E1000_WRITE_FLUSH();
-
-        udelay(10);
-
-        e1000_raise_mdi_clk(hw, &ctrl);
-        e1000_lower_mdi_clk(hw, &ctrl);
-
-        mask = mask >> 1;
-    }
-}
-
-/******************************************************************************
-* Shifts data bits in from the PHY
-*
-* hw - Struct containing variables accessed by shared code
-*
-* Bits are shifted in in MSB to LSB order.
-******************************************************************************/
-static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
-{
-    u32 ctrl;
-    u16 data = 0;
-    u8 i;
-
-    /* In order to read a register from the PHY, we need to shift in a total
-     * of 18 bits from the PHY. The first two bit (turnaround) times are used
-     * to avoid contention on the MDIO pin when a read operation is performed.
-     * These two bits are ignored by us and thrown away. Bits are "shifted in"
-     * by raising the input to the Management Data Clock (setting the MDC bit),
-     * and then reading the value of the MDIO bit.
-     */
-    ctrl = er32(CTRL);
-
-    /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
-    ctrl &= ~E1000_CTRL_MDIO_DIR;
-    ctrl &= ~E1000_CTRL_MDIO;
-
-    ew32(CTRL, ctrl);
-    E1000_WRITE_FLUSH();
-
-    /* Raise and Lower the clock before reading in the data. This accounts for
-     * the turnaround bits. The first clock occurred when we clocked out the
-     * last bit of the Register Address.
-     */
-    e1000_raise_mdi_clk(hw, &ctrl);
-    e1000_lower_mdi_clk(hw, &ctrl);
-
-    for (data = 0, i = 0; i < 16; i++) {
-        data = data << 1;
-        e1000_raise_mdi_clk(hw, &ctrl);
-        ctrl = er32(CTRL);
-        /* Check to see if we shifted in a "1". */
-        if (ctrl & E1000_CTRL_MDIO)
-            data |= 1;
-        e1000_lower_mdi_clk(hw, &ctrl);
-    }
-
-    e1000_raise_mdi_clk(hw, &ctrl);
-    e1000_lower_mdi_clk(hw, &ctrl);
-
-    return data;
-}
-
-static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
-{
-    u32 swfw_sync = 0;
-    u32 swmask = mask;
-    u32 fwmask = mask << 16;
-    s32 timeout = 200;
+	u32 ctrl;
+	u32 mask;
 
-    DEBUGFUNC("e1000_swfw_sync_acquire");
-
-    if (hw->swfwhw_semaphore_present)
-        return e1000_get_software_flag(hw);
+	/* We need to shift "count" number of bits out to the PHY. So, the value
+	 * in the "data" parameter will be shifted out to the PHY one bit at a
+	 * time. In order to do this, "data" must be broken down into bits.
+	 */
+	mask = 0x01;
+	mask <<= (count - 1);
 
-    if (!hw->swfw_sync_present)
-        return e1000_get_hw_eeprom_semaphore(hw);
+	ctrl = er32(CTRL);
 
-    while (timeout) {
-            if (e1000_get_hw_eeprom_semaphore(hw))
-                return -E1000_ERR_SWFW_SYNC;
+	/* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
+	ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
 
-            swfw_sync = er32(SW_FW_SYNC);
-            if (!(swfw_sync & (fwmask | swmask))) {
-                break;
-            }
+	while (mask) {
+		/* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
+		 * then raising and lowering the Management Data Clock. A "0" is
+		 * shifted out to the PHY by setting the MDIO bit to "0" and then
+		 * raising and lowering the clock.
+		 */
+		if (data & mask)
+			ctrl |= E1000_CTRL_MDIO;
+		else
+			ctrl &= ~E1000_CTRL_MDIO;
 
-            /* firmware currently using resource (fwmask) */
-            /* or other software thread currently using resource (swmask) */
-            e1000_put_hw_eeprom_semaphore(hw);
-            mdelay(5);
-            timeout--;
-    }
+		ew32(CTRL, ctrl);
+		E1000_WRITE_FLUSH();
 
-    if (!timeout) {
-        DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
-        return -E1000_ERR_SWFW_SYNC;
-    }
+		udelay(10);
 
-    swfw_sync |= swmask;
-    ew32(SW_FW_SYNC, swfw_sync);
+		e1000_raise_mdi_clk(hw, &ctrl);
+		e1000_lower_mdi_clk(hw, &ctrl);
 
-    e1000_put_hw_eeprom_semaphore(hw);
-    return E1000_SUCCESS;
+		mask = mask >> 1;
+	}
 }
 
-static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
+/**
+ * e1000_shift_in_mdi_bits - Shifts data bits in from the PHY
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Bits are shifted in in MSB to LSB order.
+ */
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
 {
-    u32 swfw_sync;
-    u32 swmask = mask;
+	u32 ctrl;
+	u16 data = 0;
+	u8 i;
 
-    DEBUGFUNC("e1000_swfw_sync_release");
+	/* In order to read a register from the PHY, we need to shift in a total
+	 * of 18 bits from the PHY. The first two bit (turnaround) times are used
+	 * to avoid contention on the MDIO pin when a read operation is performed.
+	 * These two bits are ignored by us and thrown away. Bits are "shifted in"
+	 * by raising the input to the Management Data Clock (setting the MDC bit),
+	 * and then reading the value of the MDIO bit.
+	 */
+	ctrl = er32(CTRL);
 
-    if (hw->swfwhw_semaphore_present) {
-        e1000_release_software_flag(hw);
-        return;
-    }
+	/* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
+	ctrl &= ~E1000_CTRL_MDIO_DIR;
+	ctrl &= ~E1000_CTRL_MDIO;
 
-    if (!hw->swfw_sync_present) {
-        e1000_put_hw_eeprom_semaphore(hw);
-        return;
-    }
+	ew32(CTRL, ctrl);
+	E1000_WRITE_FLUSH();
 
-    /* if (e1000_get_hw_eeprom_semaphore(hw))
-     *    return -E1000_ERR_SWFW_SYNC; */
-    while (e1000_get_hw_eeprom_semaphore(hw) != E1000_SUCCESS);
-        /* empty */
+	/* Raise and Lower the clock before reading in the data. This accounts for
+	 * the turnaround bits. The first clock occurred when we clocked out the
+	 * last bit of the Register Address.
+	 */
+	e1000_raise_mdi_clk(hw, &ctrl);
+	e1000_lower_mdi_clk(hw, &ctrl);
+
+	for (data = 0, i = 0; i < 16; i++) {
+		data = data << 1;
+		e1000_raise_mdi_clk(hw, &ctrl);
+		ctrl = er32(CTRL);
+		/* Check to see if we shifted in a "1". */
+		if (ctrl & E1000_CTRL_MDIO)
+			data |= 1;
+		e1000_lower_mdi_clk(hw, &ctrl);
+	}
 
-    swfw_sync = er32(SW_FW_SYNC);
-    swfw_sync &= ~swmask;
-    ew32(SW_FW_SYNC, swfw_sync);
+	e1000_raise_mdi_clk(hw, &ctrl);
+	e1000_lower_mdi_clk(hw, &ctrl);
 
-    e1000_put_hw_eeprom_semaphore(hw);
+	return data;
 }
 
-/*****************************************************************************
-* Reads the value from a PHY register, if the value is on a specific non zero
-* page, sets the page first.
-* hw - Struct containing variables accessed by shared code
-* reg_addr - address of the PHY register to read
-******************************************************************************/
+
+/**
+ * e1000_read_phy_reg - read a phy register
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to read
+ *
+ * Reads the value from a PHY register, if the value is on a specific non zero
+ * page, sets the page first.
+ */
 s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
 {
-    u32 ret_val;
-    u16 swfw;
-
-    DEBUGFUNC("e1000_read_phy_reg");
-
-    if ((hw->mac_type == e1000_80003es2lan) &&
-        (er32(STATUS) & E1000_STATUS_FUNC_1)) {
-        swfw = E1000_SWFW_PHY1_SM;
-    } else {
-        swfw = E1000_SWFW_PHY0_SM;
-    }
-    if (e1000_swfw_sync_acquire(hw, swfw))
-        return -E1000_ERR_SWFW_SYNC;
-
-    if ((hw->phy_type == e1000_phy_igp ||
-        hw->phy_type == e1000_phy_igp_3 ||
-        hw->phy_type == e1000_phy_igp_2) &&
-       (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
-        ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
-                                         (u16)reg_addr);
-        if (ret_val) {
-            e1000_swfw_sync_release(hw, swfw);
-            return ret_val;
-        }
-    } else if (hw->phy_type == e1000_phy_gg82563) {
-        if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
-            (hw->mac_type == e1000_80003es2lan)) {
-            /* Select Configuration Page */
-            if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
-                ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
-                          (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
-            } else {
-                /* Use Alternative Page Select register to access
-                 * registers 30 and 31
-                 */
-                ret_val = e1000_write_phy_reg_ex(hw,
-                                                 GG82563_PHY_PAGE_SELECT_ALT,
-                          (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
-            }
-
-            if (ret_val) {
-                e1000_swfw_sync_release(hw, swfw);
-                return ret_val;
-            }
-        }
-    }
-
-    ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
-                                    phy_data);
-
-    e1000_swfw_sync_release(hw, swfw);
-    return ret_val;
+	u32 ret_val;
+
+	DEBUGFUNC("e1000_read_phy_reg");
+
+	if ((hw->phy_type == e1000_phy_igp) &&
+	    (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+		ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+						 (u16) reg_addr);
+		if (ret_val)
+			return ret_val;
+	}
+
+	ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+					phy_data);
+
+	return ret_val;
 }
 
 static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
 				 u16 *phy_data)
 {
-    u32 i;
-    u32 mdic = 0;
-    const u32 phy_addr = 1;
-
-    DEBUGFUNC("e1000_read_phy_reg_ex");
-
-    if (reg_addr > MAX_PHY_REG_ADDRESS) {
-        DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
-        return -E1000_ERR_PARAM;
-    }
-
-    if (hw->mac_type > e1000_82543) {
-        /* Set up Op-code, Phy Address, and register address in the MDI
-         * Control register.  The MAC will take care of interfacing with the
-         * PHY to retrieve the desired data.
-         */
-        mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
-                (phy_addr << E1000_MDIC_PHY_SHIFT) |
-                (E1000_MDIC_OP_READ));
-
-        ew32(MDIC, mdic);
-
-        /* Poll the ready bit to see if the MDI read completed */
-        for (i = 0; i < 64; i++) {
-            udelay(50);
-            mdic = er32(MDIC);
-            if (mdic & E1000_MDIC_READY) break;
-        }
-        if (!(mdic & E1000_MDIC_READY)) {
-            DEBUGOUT("MDI Read did not complete\n");
-            return -E1000_ERR_PHY;
-        }
-        if (mdic & E1000_MDIC_ERROR) {
-            DEBUGOUT("MDI Error\n");
-            return -E1000_ERR_PHY;
-        }
-        *phy_data = (u16)mdic;
-    } else {
-        /* We must first send a preamble through the MDIO pin to signal the
-         * beginning of an MII instruction.  This is done by sending 32
-         * consecutive "1" bits.
-         */
-        e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
-
-        /* Now combine the next few fields that are required for a read
-         * operation.  We use this method instead of calling the
-         * e1000_shift_out_mdi_bits routine five different times. The format of
-         * a MII read instruction consists of a shift out of 14 bits and is
-         * defined as follows:
-         *    <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
-         * followed by a shift in of 18 bits.  This first two bits shifted in
-         * are TurnAround bits used to avoid contention on the MDIO pin when a
-         * READ operation is performed.  These two bits are thrown away
-         * followed by a shift in of 16 bits which contains the desired data.
-         */
-        mdic = ((reg_addr) | (phy_addr << 5) |
-                (PHY_OP_READ << 10) | (PHY_SOF << 12));
-
-        e1000_shift_out_mdi_bits(hw, mdic, 14);
-
-        /* Now that we've shifted out the read command to the MII, we need to
-         * "shift in" the 16-bit value (18 total bits) of the requested PHY
-         * register address.
-         */
-        *phy_data = e1000_shift_in_mdi_bits(hw);
-    }
-    return E1000_SUCCESS;
+	u32 i;
+	u32 mdic = 0;
+	const u32 phy_addr = 1;
+
+	DEBUGFUNC("e1000_read_phy_reg_ex");
+
+	if (reg_addr > MAX_PHY_REG_ADDRESS) {
+		DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+		return -E1000_ERR_PARAM;
+	}
+
+	if (hw->mac_type > e1000_82543) {
+		/* Set up Op-code, Phy Address, and register address in the MDI
+		 * Control register.  The MAC will take care of interfacing with the
+		 * PHY to retrieve the desired data.
+		 */
+		mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+			(phy_addr << E1000_MDIC_PHY_SHIFT) |
+			(E1000_MDIC_OP_READ));
+
+		ew32(MDIC, mdic);
+
+		/* Poll the ready bit to see if the MDI read completed */
+		for (i = 0; i < 64; i++) {
+			udelay(50);
+			mdic = er32(MDIC);
+			if (mdic & E1000_MDIC_READY)
+				break;
+		}
+		if (!(mdic & E1000_MDIC_READY)) {
+			DEBUGOUT("MDI Read did not complete\n");
+			return -E1000_ERR_PHY;
+		}
+		if (mdic & E1000_MDIC_ERROR) {
+			DEBUGOUT("MDI Error\n");
+			return -E1000_ERR_PHY;
+		}
+		*phy_data = (u16) mdic;
+	} else {
+		/* We must first send a preamble through the MDIO pin to signal the
+		 * beginning of an MII instruction.  This is done by sending 32
+		 * consecutive "1" bits.
+		 */
+		e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+		/* Now combine the next few fields that are required for a read
+		 * operation.  We use this method instead of calling the
+		 * e1000_shift_out_mdi_bits routine five different times. The format of
+		 * a MII read instruction consists of a shift out of 14 bits and is
+		 * defined as follows:
+		 *    <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
+		 * followed by a shift in of 18 bits.  This first two bits shifted in
+		 * are TurnAround bits used to avoid contention on the MDIO pin when a
+		 * READ operation is performed.  These two bits are thrown away
+		 * followed by a shift in of 16 bits which contains the desired data.
+		 */
+		mdic = ((reg_addr) | (phy_addr << 5) |
+			(PHY_OP_READ << 10) | (PHY_SOF << 12));
+
+		e1000_shift_out_mdi_bits(hw, mdic, 14);
+
+		/* Now that we've shifted out the read command to the MII, we need to
+		 * "shift in" the 16-bit value (18 total bits) of the requested PHY
+		 * register address.
+		 */
+		*phy_data = e1000_shift_in_mdi_bits(hw);
+	}
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Writes a value to a PHY register
-*
-* hw - Struct containing variables accessed by shared code
-* reg_addr - address of the PHY register to write
-* data - data to write to the PHY
-******************************************************************************/
+/**
+ * e1000_write_phy_reg - write a phy register
+ *
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to write
+ * @data: data to write to the PHY
+
+ * Writes a value to a PHY register
+ */
 s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
 {
-    u32 ret_val;
-    u16 swfw;
-
-    DEBUGFUNC("e1000_write_phy_reg");
-
-    if ((hw->mac_type == e1000_80003es2lan) &&
-        (er32(STATUS) & E1000_STATUS_FUNC_1)) {
-        swfw = E1000_SWFW_PHY1_SM;
-    } else {
-        swfw = E1000_SWFW_PHY0_SM;
-    }
-    if (e1000_swfw_sync_acquire(hw, swfw))
-        return -E1000_ERR_SWFW_SYNC;
-
-    if ((hw->phy_type == e1000_phy_igp ||
-        hw->phy_type == e1000_phy_igp_3 ||
-        hw->phy_type == e1000_phy_igp_2) &&
-       (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
-        ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
-                                         (u16)reg_addr);
-        if (ret_val) {
-            e1000_swfw_sync_release(hw, swfw);
-            return ret_val;
-        }
-    } else if (hw->phy_type == e1000_phy_gg82563) {
-        if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
-            (hw->mac_type == e1000_80003es2lan)) {
-            /* Select Configuration Page */
-            if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
-                ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
-                          (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
-            } else {
-                /* Use Alternative Page Select register to access
-                 * registers 30 and 31
-                 */
-                ret_val = e1000_write_phy_reg_ex(hw,
-                                                 GG82563_PHY_PAGE_SELECT_ALT,
-                          (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
-            }
-
-            if (ret_val) {
-                e1000_swfw_sync_release(hw, swfw);
-                return ret_val;
-            }
-        }
-    }
-
-    ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
-                                     phy_data);
-
-    e1000_swfw_sync_release(hw, swfw);
-    return ret_val;
+	u32 ret_val;
+
+	DEBUGFUNC("e1000_write_phy_reg");
+
+	if ((hw->phy_type == e1000_phy_igp) &&
+	    (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+		ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+						 (u16) reg_addr);
+		if (ret_val)
+			return ret_val;
+	}
+
+	ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+					 phy_data);
+
+	return ret_val;
 }
 
 static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
 				  u16 phy_data)
 {
-    u32 i;
-    u32 mdic = 0;
-    const u32 phy_addr = 1;
-
-    DEBUGFUNC("e1000_write_phy_reg_ex");
-
-    if (reg_addr > MAX_PHY_REG_ADDRESS) {
-        DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
-        return -E1000_ERR_PARAM;
-    }
-
-    if (hw->mac_type > e1000_82543) {
-        /* Set up Op-code, Phy Address, register address, and data intended
-         * for the PHY register in the MDI Control register.  The MAC will take
-         * care of interfacing with the PHY to send the desired data.
-         */
-        mdic = (((u32)phy_data) |
-                (reg_addr << E1000_MDIC_REG_SHIFT) |
-                (phy_addr << E1000_MDIC_PHY_SHIFT) |
-                (E1000_MDIC_OP_WRITE));
-
-        ew32(MDIC, mdic);
-
-        /* Poll the ready bit to see if the MDI read completed */
-        for (i = 0; i < 641; i++) {
-            udelay(5);
-            mdic = er32(MDIC);
-            if (mdic & E1000_MDIC_READY) break;
-        }
-        if (!(mdic & E1000_MDIC_READY)) {
-            DEBUGOUT("MDI Write did not complete\n");
-            return -E1000_ERR_PHY;
-        }
-    } else {
-        /* We'll need to use the SW defined pins to shift the write command
-         * out to the PHY. We first send a preamble to the PHY to signal the
-         * beginning of the MII instruction.  This is done by sending 32
-         * consecutive "1" bits.
-         */
-        e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
-
-        /* Now combine the remaining required fields that will indicate a
-         * write operation. We use this method instead of calling the
-         * e1000_shift_out_mdi_bits routine for each field in the command. The
-         * format of a MII write instruction is as follows:
-         * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
-         */
-        mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
-                (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
-        mdic <<= 16;
-        mdic |= (u32)phy_data;
-
-        e1000_shift_out_mdi_bits(hw, mdic, 32);
-    }
-
-    return E1000_SUCCESS;
-}
+	u32 i;
+	u32 mdic = 0;
+	const u32 phy_addr = 1;
 
-static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data)
-{
-    u32 reg_val;
-    u16 swfw;
-    DEBUGFUNC("e1000_read_kmrn_reg");
-
-    if ((hw->mac_type == e1000_80003es2lan) &&
-        (er32(STATUS) & E1000_STATUS_FUNC_1)) {
-        swfw = E1000_SWFW_PHY1_SM;
-    } else {
-        swfw = E1000_SWFW_PHY0_SM;
-    }
-    if (e1000_swfw_sync_acquire(hw, swfw))
-        return -E1000_ERR_SWFW_SYNC;
-
-    /* Write register address */
-    reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
-              E1000_KUMCTRLSTA_OFFSET) |
-              E1000_KUMCTRLSTA_REN;
-    ew32(KUMCTRLSTA, reg_val);
-    udelay(2);
-
-    /* Read the data returned */
-    reg_val = er32(KUMCTRLSTA);
-    *data = (u16)reg_val;
-
-    e1000_swfw_sync_release(hw, swfw);
-    return E1000_SUCCESS;
-}
+	DEBUGFUNC("e1000_write_phy_reg_ex");
 
-static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data)
-{
-    u32 reg_val;
-    u16 swfw;
-    DEBUGFUNC("e1000_write_kmrn_reg");
-
-    if ((hw->mac_type == e1000_80003es2lan) &&
-        (er32(STATUS) & E1000_STATUS_FUNC_1)) {
-        swfw = E1000_SWFW_PHY1_SM;
-    } else {
-        swfw = E1000_SWFW_PHY0_SM;
-    }
-    if (e1000_swfw_sync_acquire(hw, swfw))
-        return -E1000_ERR_SWFW_SYNC;
-
-    reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
-              E1000_KUMCTRLSTA_OFFSET) | data;
-    ew32(KUMCTRLSTA, reg_val);
-    udelay(2);
-
-    e1000_swfw_sync_release(hw, swfw);
-    return E1000_SUCCESS;
+	if (reg_addr > MAX_PHY_REG_ADDRESS) {
+		DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+		return -E1000_ERR_PARAM;
+	}
+
+	if (hw->mac_type > e1000_82543) {
+		/* Set up Op-code, Phy Address, register address, and data intended
+		 * for the PHY register in the MDI Control register.  The MAC will take
+		 * care of interfacing with the PHY to send the desired data.
+		 */
+		mdic = (((u32) phy_data) |
+			(reg_addr << E1000_MDIC_REG_SHIFT) |
+			(phy_addr << E1000_MDIC_PHY_SHIFT) |
+			(E1000_MDIC_OP_WRITE));
+
+		ew32(MDIC, mdic);
+
+		/* Poll the ready bit to see if the MDI read completed */
+		for (i = 0; i < 641; i++) {
+			udelay(5);
+			mdic = er32(MDIC);
+			if (mdic & E1000_MDIC_READY)
+				break;
+		}
+		if (!(mdic & E1000_MDIC_READY)) {
+			DEBUGOUT("MDI Write did not complete\n");
+			return -E1000_ERR_PHY;
+		}
+	} else {
+		/* We'll need to use the SW defined pins to shift the write command
+		 * out to the PHY. We first send a preamble to the PHY to signal the
+		 * beginning of the MII instruction.  This is done by sending 32
+		 * consecutive "1" bits.
+		 */
+		e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+		/* Now combine the remaining required fields that will indicate a
+		 * write operation. We use this method instead of calling the
+		 * e1000_shift_out_mdi_bits routine for each field in the command. The
+		 * format of a MII write instruction is as follows:
+		 * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
+		 */
+		mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
+			(PHY_OP_WRITE << 12) | (PHY_SOF << 14));
+		mdic <<= 16;
+		mdic |= (u32) phy_data;
+
+		e1000_shift_out_mdi_bits(hw, mdic, 32);
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Returns the PHY to the power-on reset state
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
+/**
+ * e1000_phy_hw_reset - reset the phy, hardware style
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Returns the PHY to the power-on reset state
+ */
 s32 e1000_phy_hw_reset(struct e1000_hw *hw)
 {
-    u32 ctrl, ctrl_ext;
-    u32 led_ctrl;
-    s32 ret_val;
-    u16 swfw;
-
-    DEBUGFUNC("e1000_phy_hw_reset");
-
-    /* In the case of the phy reset being blocked, it's not an error, we
-     * simply return success without performing the reset. */
-    ret_val = e1000_check_phy_reset_block(hw);
-    if (ret_val)
-        return E1000_SUCCESS;
-
-    DEBUGOUT("Resetting Phy...\n");
-
-    if (hw->mac_type > e1000_82543) {
-        if ((hw->mac_type == e1000_80003es2lan) &&
-            (er32(STATUS) & E1000_STATUS_FUNC_1)) {
-            swfw = E1000_SWFW_PHY1_SM;
-        } else {
-            swfw = E1000_SWFW_PHY0_SM;
-        }
-        if (e1000_swfw_sync_acquire(hw, swfw)) {
-            DEBUGOUT("Unable to acquire swfw sync\n");
-            return -E1000_ERR_SWFW_SYNC;
-        }
-        /* Read the device control register and assert the E1000_CTRL_PHY_RST
-         * bit. Then, take it out of reset.
-         * For pre-e1000_82571 hardware, we delay for 10ms between the assert
-         * and deassert.  For e1000_82571 hardware and later, we instead delay
-         * for 50us between and 10ms after the deassertion.
-         */
-        ctrl = er32(CTRL);
-        ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
-        E1000_WRITE_FLUSH();
-
-        if (hw->mac_type < e1000_82571)
-            msleep(10);
-        else
-            udelay(100);
-
-        ew32(CTRL, ctrl);
-        E1000_WRITE_FLUSH();
-
-        if (hw->mac_type >= e1000_82571)
-            mdelay(10);
-
-        e1000_swfw_sync_release(hw, swfw);
-    } else {
-        /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
-         * bit to put the PHY into reset. Then, take it out of reset.
-         */
-        ctrl_ext = er32(CTRL_EXT);
-        ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
-        ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
-        ew32(CTRL_EXT, ctrl_ext);
-        E1000_WRITE_FLUSH();
-        msleep(10);
-        ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
-        ew32(CTRL_EXT, ctrl_ext);
-        E1000_WRITE_FLUSH();
-    }
-    udelay(150);
-
-    if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
-        /* Configure activity LED after PHY reset */
-        led_ctrl = er32(LEDCTL);
-        led_ctrl &= IGP_ACTIVITY_LED_MASK;
-        led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
-        ew32(LEDCTL, led_ctrl);
-    }
-
-    /* Wait for FW to finish PHY configuration. */
-    ret_val = e1000_get_phy_cfg_done(hw);
-    if (ret_val != E1000_SUCCESS)
-        return ret_val;
-    e1000_release_software_semaphore(hw);
-
-    if ((hw->mac_type == e1000_ich8lan) && (hw->phy_type == e1000_phy_igp_3))
-        ret_val = e1000_init_lcd_from_nvm(hw);
-
-    return ret_val;
+	u32 ctrl, ctrl_ext;
+	u32 led_ctrl;
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_phy_hw_reset");
+
+	DEBUGOUT("Resetting Phy...\n");
+
+	if (hw->mac_type > e1000_82543) {
+		/* Read the device control register and assert the E1000_CTRL_PHY_RST
+		 * bit. Then, take it out of reset.
+		 * For e1000 hardware, we delay for 10ms between the assert
+		 * and deassert.
+		 */
+		ctrl = er32(CTRL);
+		ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+		E1000_WRITE_FLUSH();
+
+		msleep(10);
+
+		ew32(CTRL, ctrl);
+		E1000_WRITE_FLUSH();
+
+	} else {
+		/* Read the Extended Device Control Register, assert the PHY_RESET_DIR
+		 * bit to put the PHY into reset. Then, take it out of reset.
+		 */
+		ctrl_ext = er32(CTRL_EXT);
+		ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
+		ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
+		ew32(CTRL_EXT, ctrl_ext);
+		E1000_WRITE_FLUSH();
+		msleep(10);
+		ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
+		ew32(CTRL_EXT, ctrl_ext);
+		E1000_WRITE_FLUSH();
+	}
+	udelay(150);
+
+	if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+		/* Configure activity LED after PHY reset */
+		led_ctrl = er32(LEDCTL);
+		led_ctrl &= IGP_ACTIVITY_LED_MASK;
+		led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+		ew32(LEDCTL, led_ctrl);
+	}
+
+	/* Wait for FW to finish PHY configuration. */
+	ret_val = e1000_get_phy_cfg_done(hw);
+	if (ret_val != E1000_SUCCESS)
+		return ret_val;
+
+	return ret_val;
 }
 
-/******************************************************************************
-* Resets the PHY
-*
-* hw - Struct containing variables accessed by shared code
-*
-* Sets bit 15 of the MII Control register
-******************************************************************************/
+/**
+ * e1000_phy_reset - reset the phy to commit settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Resets the PHY
+ * Sets bit 15 of the MII Control register
+ */
 s32 e1000_phy_reset(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_phy_reset");
-
-    /* In the case of the phy reset being blocked, it's not an error, we
-     * simply return success without performing the reset. */
-    ret_val = e1000_check_phy_reset_block(hw);
-    if (ret_val)
-        return E1000_SUCCESS;
-
-    switch (hw->phy_type) {
-    case e1000_phy_igp:
-    case e1000_phy_igp_2:
-    case e1000_phy_igp_3:
-    case e1000_phy_ife:
-        ret_val = e1000_phy_hw_reset(hw);
-        if (ret_val)
-            return ret_val;
-        break;
-    default:
-        ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data |= MII_CR_RESET;
-        ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
-        if (ret_val)
-            return ret_val;
-
-        udelay(1);
-        break;
-    }
-
-    if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2)
-        e1000_phy_init_script(hw);
-
-    return E1000_SUCCESS;
-}
+	s32 ret_val;
+	u16 phy_data;
 
-/******************************************************************************
-* Work-around for 82566 power-down: on D3 entry-
-* 1) disable gigabit link
-* 2) write VR power-down enable
-* 3) read it back
-* if successful continue, else issue LCD reset and repeat
-*
-* hw - struct containing variables accessed by shared code
-******************************************************************************/
-void e1000_phy_powerdown_workaround(struct e1000_hw *hw)
-{
-    s32 reg;
-    u16 phy_data;
-    s32 retry = 0;
+	DEBUGFUNC("e1000_phy_reset");
 
-    DEBUGFUNC("e1000_phy_powerdown_workaround");
+	switch (hw->phy_type) {
+	case e1000_phy_igp:
+		ret_val = e1000_phy_hw_reset(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	default:
+		ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+		if (ret_val)
+			return ret_val;
 
-    if (hw->phy_type != e1000_phy_igp_3)
-        return;
+		phy_data |= MII_CR_RESET;
+		ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+		if (ret_val)
+			return ret_val;
 
-    do {
-        /* Disable link */
-        reg = er32(PHY_CTRL);
-        ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
-                        E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+		udelay(1);
+		break;
+	}
 
-        /* Write VR power-down enable - bits 9:8 should be 10b */
-        e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
-        phy_data |= (1 << 9);
-        phy_data &= ~(1 << 8);
-        e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data);
+	if (hw->phy_type == e1000_phy_igp)
+		e1000_phy_init_script(hw);
 
-        /* Read it back and test */
-        e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
-        if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry)
-            break;
+	return E1000_SUCCESS;
+}
 
-        /* Issue PHY reset and repeat at most one more time */
-        reg = er32(CTRL);
-        ew32(CTRL, reg | E1000_CTRL_PHY_RST);
-        retry++;
-    } while (retry);
+/**
+ * e1000_detect_gig_phy - check the phy type
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Probes the expected PHY address for known PHY IDs
+ */
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
+{
+	s32 phy_init_status, ret_val;
+	u16 phy_id_high, phy_id_low;
+	bool match = false;
 
-    return;
+	DEBUGFUNC("e1000_detect_gig_phy");
 
-}
+	if (hw->phy_id != 0)
+		return E1000_SUCCESS;
 
-/******************************************************************************
-* Work-around for 82566 Kumeran PCS lock loss:
-* On link status change (i.e. PCI reset, speed change) and link is up and
-* speed is gigabit-
-* 0) if workaround is optionally disabled do nothing
-* 1) wait 1ms for Kumeran link to come up
-* 2) check Kumeran Diagnostic register PCS lock loss bit
-* 3) if not set the link is locked (all is good), otherwise...
-* 4) reset the PHY
-* 5) repeat up to 10 times
-* Note: this is only called for IGP3 copper when speed is 1gb.
-*
-* hw - struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
-{
-    s32 ret_val;
-    s32 reg;
-    s32 cnt;
-    u16 phy_data;
-
-    if (hw->kmrn_lock_loss_workaround_disabled)
-        return E1000_SUCCESS;
-
-    /* Make sure link is up before proceeding.  If not just return.
-     * Attempting this while link is negotiating fouled up link
-     * stability */
-    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-
-    if (phy_data & MII_SR_LINK_STATUS) {
-        for (cnt = 0; cnt < 10; cnt++) {
-            /* read once to clear */
-            ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
-            if (ret_val)
-                return ret_val;
-            /* and again to get new status */
-            ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            /* check for PCS lock */
-            if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
-                return E1000_SUCCESS;
-
-            /* Issue PHY reset */
-            e1000_phy_hw_reset(hw);
-            mdelay(5);
-        }
-        /* Disable GigE link negotiation */
-        reg = er32(PHY_CTRL);
-        ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
-                        E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
-
-        /* unable to acquire PCS lock */
-        return E1000_ERR_PHY;
-    }
-
-    return E1000_SUCCESS;
-}
+	/* Read the PHY ID Registers to identify which PHY is onboard. */
+	ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
+	if (ret_val)
+		return ret_val;
 
-/******************************************************************************
-* Probes the expected PHY address for known PHY IDs
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
-{
-    s32 phy_init_status, ret_val;
-    u16 phy_id_high, phy_id_low;
-    bool match = false;
-
-    DEBUGFUNC("e1000_detect_gig_phy");
-
-    if (hw->phy_id != 0)
-        return E1000_SUCCESS;
-
-    /* The 82571 firmware may still be configuring the PHY.  In this
-     * case, we cannot access the PHY until the configuration is done.  So
-     * we explicitly set the PHY values. */
-    if (hw->mac_type == e1000_82571 ||
-        hw->mac_type == e1000_82572) {
-        hw->phy_id = IGP01E1000_I_PHY_ID;
-        hw->phy_type = e1000_phy_igp_2;
-        return E1000_SUCCESS;
-    }
-
-    /* ESB-2 PHY reads require e1000_phy_gg82563 to be set because of a work-
-     * around that forces PHY page 0 to be set or the reads fail.  The rest of
-     * the code in this routine uses e1000_read_phy_reg to read the PHY ID.
-     * So for ESB-2 we need to have this set so our reads won't fail.  If the
-     * attached PHY is not a e1000_phy_gg82563, the routines below will figure
-     * this out as well. */
-    if (hw->mac_type == e1000_80003es2lan)
-        hw->phy_type = e1000_phy_gg82563;
-
-    /* Read the PHY ID Registers to identify which PHY is onboard. */
-    ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
-    if (ret_val)
-        return ret_val;
-
-    hw->phy_id = (u32)(phy_id_high << 16);
-    udelay(20);
-    ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
-    if (ret_val)
-        return ret_val;
-
-    hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK);
-    hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK;
-
-    switch (hw->mac_type) {
-    case e1000_82543:
-        if (hw->phy_id == M88E1000_E_PHY_ID) match = true;
-        break;
-    case e1000_82544:
-        if (hw->phy_id == M88E1000_I_PHY_ID) match = true;
-        break;
-    case e1000_82540:
-    case e1000_82545:
-    case e1000_82545_rev_3:
-    case e1000_82546:
-    case e1000_82546_rev_3:
-        if (hw->phy_id == M88E1011_I_PHY_ID) match = true;
-        break;
-    case e1000_82541:
-    case e1000_82541_rev_2:
-    case e1000_82547:
-    case e1000_82547_rev_2:
-        if (hw->phy_id == IGP01E1000_I_PHY_ID) match = true;
-        break;
-    case e1000_82573:
-        if (hw->phy_id == M88E1111_I_PHY_ID) match = true;
-        break;
-    case e1000_80003es2lan:
-        if (hw->phy_id == GG82563_E_PHY_ID) match = true;
-        break;
-    case e1000_ich8lan:
-        if (hw->phy_id == IGP03E1000_E_PHY_ID) match = true;
-        if (hw->phy_id == IFE_E_PHY_ID) match = true;
-        if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = true;
-        if (hw->phy_id == IFE_C_E_PHY_ID) match = true;
-        break;
-    default:
-        DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
-        return -E1000_ERR_CONFIG;
-    }
-    phy_init_status = e1000_set_phy_type(hw);
-
-    if ((match) && (phy_init_status == E1000_SUCCESS)) {
-        DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
-        return E1000_SUCCESS;
-    }
-    DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
-    return -E1000_ERR_PHY;
+	hw->phy_id = (u32) (phy_id_high << 16);
+	udelay(20);
+	ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
+	if (ret_val)
+		return ret_val;
+
+	hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
+	hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
+
+	switch (hw->mac_type) {
+	case e1000_82543:
+		if (hw->phy_id == M88E1000_E_PHY_ID)
+			match = true;
+		break;
+	case e1000_82544:
+		if (hw->phy_id == M88E1000_I_PHY_ID)
+			match = true;
+		break;
+	case e1000_82540:
+	case e1000_82545:
+	case e1000_82545_rev_3:
+	case e1000_82546:
+	case e1000_82546_rev_3:
+		if (hw->phy_id == M88E1011_I_PHY_ID)
+			match = true;
+		break;
+	case e1000_82541:
+	case e1000_82541_rev_2:
+	case e1000_82547:
+	case e1000_82547_rev_2:
+		if (hw->phy_id == IGP01E1000_I_PHY_ID)
+			match = true;
+		break;
+	default:
+		DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
+		return -E1000_ERR_CONFIG;
+	}
+	phy_init_status = e1000_set_phy_type(hw);
+
+	if ((match) && (phy_init_status == E1000_SUCCESS)) {
+		DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
+		return E1000_SUCCESS;
+	}
+	DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
+	return -E1000_ERR_PHY;
 }
 
-/******************************************************************************
-* Resets the PHY's DSP
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
+/**
+ * e1000_phy_reset_dsp - reset DSP
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Resets the PHY's DSP
+ */
 static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    DEBUGFUNC("e1000_phy_reset_dsp");
-
-    do {
-        if (hw->phy_type != e1000_phy_gg82563) {
-            ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
-            if (ret_val) break;
-        }
-        ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
-        if (ret_val) break;
-        ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
-        if (ret_val) break;
-        ret_val = E1000_SUCCESS;
-    } while (0);
-
-    return ret_val;
+	s32 ret_val;
+	DEBUGFUNC("e1000_phy_reset_dsp");
+
+	do {
+		ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
+		if (ret_val)
+			break;
+		ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
+		if (ret_val)
+			break;
+		ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
+		if (ret_val)
+			break;
+		ret_val = E1000_SUCCESS;
+	} while (0);
+
+	return ret_val;
 }
 
-/******************************************************************************
-* Get PHY information from various PHY registers for igp PHY only.
-*
-* hw - Struct containing variables accessed by shared code
-* phy_info - PHY information structure
-******************************************************************************/
+/**
+ * e1000_phy_igp_get_info - get igp specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers for igp PHY only.
+ */
 static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
 				  struct e1000_phy_info *phy_info)
 {
-    s32 ret_val;
-    u16 phy_data, min_length, max_length, average;
-    e1000_rev_polarity polarity;
-
-    DEBUGFUNC("e1000_phy_igp_get_info");
-
-    /* The downshift status is checked only once, after link is established,
-     * and it stored in the hw->speed_downgraded parameter. */
-    phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
-
-    /* IGP01E1000 does not need to support it. */
-    phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
-
-    /* IGP01E1000 always correct polarity reversal */
-    phy_info->polarity_correction = e1000_polarity_reversal_enabled;
-
-    /* Check polarity status */
-    ret_val = e1000_check_polarity(hw, &polarity);
-    if (ret_val)
-        return ret_val;
-
-    phy_info->cable_polarity = polarity;
-
-    ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & IGP01E1000_PSSR_MDIX) >>
-                          IGP01E1000_PSSR_MDIX_SHIFT);
-
-    if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
-       IGP01E1000_PSSR_SPEED_1000MBPS) {
-        /* Local/Remote Receiver Information are only valid at 1000 Mbps */
-        ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
-                             SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
-                             e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-        phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
-                              SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
-                              e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-
-        /* Get cable length */
-        ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
-        if (ret_val)
-            return ret_val;
-
-        /* Translate to old method */
-        average = (max_length + min_length) / 2;
-
-        if (average <= e1000_igp_cable_length_50)
-            phy_info->cable_length = e1000_cable_length_50;
-        else if (average <= e1000_igp_cable_length_80)
-            phy_info->cable_length = e1000_cable_length_50_80;
-        else if (average <= e1000_igp_cable_length_110)
-            phy_info->cable_length = e1000_cable_length_80_110;
-        else if (average <= e1000_igp_cable_length_140)
-            phy_info->cable_length = e1000_cable_length_110_140;
-        else
-            phy_info->cable_length = e1000_cable_length_140;
-    }
-
-    return E1000_SUCCESS;
-}
+	s32 ret_val;
+	u16 phy_data, min_length, max_length, average;
+	e1000_rev_polarity polarity;
+
+	DEBUGFUNC("e1000_phy_igp_get_info");
+
+	/* The downshift status is checked only once, after link is established,
+	 * and it stored in the hw->speed_downgraded parameter. */
+	phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+	/* IGP01E1000 does not need to support it. */
+	phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+	/* IGP01E1000 always correct polarity reversal */
+	phy_info->polarity_correction = e1000_polarity_reversal_enabled;
+
+	/* Check polarity status */
+	ret_val = e1000_check_polarity(hw, &polarity);
+	if (ret_val)
+		return ret_val;
+
+	phy_info->cable_polarity = polarity;
+
+	ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_info->mdix_mode =
+	    (e1000_auto_x_mode) ((phy_data & IGP01E1000_PSSR_MDIX) >>
+				 IGP01E1000_PSSR_MDIX_SHIFT);
+
+	if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+	    IGP01E1000_PSSR_SPEED_1000MBPS) {
+		/* Local/Remote Receiver Information are only valid at 1000 Mbps */
+		ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+				      SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+		    e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+		phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+				       SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+		    e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+		/* Get cable length */
+		ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+		if (ret_val)
+			return ret_val;
+
+		/* Translate to old method */
+		average = (max_length + min_length) / 2;
+
+		if (average <= e1000_igp_cable_length_50)
+			phy_info->cable_length = e1000_cable_length_50;
+		else if (average <= e1000_igp_cable_length_80)
+			phy_info->cable_length = e1000_cable_length_50_80;
+		else if (average <= e1000_igp_cable_length_110)
+			phy_info->cable_length = e1000_cable_length_80_110;
+		else if (average <= e1000_igp_cable_length_140)
+			phy_info->cable_length = e1000_cable_length_110_140;
+		else
+			phy_info->cable_length = e1000_cable_length_140;
+	}
 
-/******************************************************************************
-* Get PHY information from various PHY registers for ife PHY only.
-*
-* hw - Struct containing variables accessed by shared code
-* phy_info - PHY information structure
-******************************************************************************/
-static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
-				  struct e1000_phy_info *phy_info)
-{
-    s32 ret_val;
-    u16 phy_data;
-    e1000_rev_polarity polarity;
-
-    DEBUGFUNC("e1000_phy_ife_get_info");
-
-    phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
-    phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
-
-    ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
-    if (ret_val)
-        return ret_val;
-    phy_info->polarity_correction =
-                        ((phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >>
-                        IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT) ?
-                        e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
-
-    if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) {
-        ret_val = e1000_check_polarity(hw, &polarity);
-        if (ret_val)
-            return ret_val;
-    } else {
-        /* Polarity is forced. */
-        polarity = ((phy_data & IFE_PSC_FORCE_POLARITY) >>
-                     IFE_PSC_FORCE_POLARITY_SHIFT) ?
-                     e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
-    }
-    phy_info->cable_polarity = polarity;
-
-    ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    phy_info->mdix_mode = (e1000_auto_x_mode)
-                     ((phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >>
-                     IFE_PMC_MDIX_MODE_SHIFT);
-
-    return E1000_SUCCESS;
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Get PHY information from various PHY registers fot m88 PHY only.
-*
-* hw - Struct containing variables accessed by shared code
-* phy_info - PHY information structure
-******************************************************************************/
+/**
+ * e1000_phy_m88_get_info - get m88 specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers for m88 PHY only.
+ */
 static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
 				  struct e1000_phy_info *phy_info)
 {
-    s32 ret_val;
-    u16 phy_data;
-    e1000_rev_polarity polarity;
-
-    DEBUGFUNC("e1000_phy_m88_get_info");
-
-    /* The downshift status is checked only once, after link is established,
-     * and it stored in the hw->speed_downgraded parameter. */
-    phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
-
-    ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    phy_info->extended_10bt_distance =
-        ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
-        M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
-        e1000_10bt_ext_dist_enable_lower : e1000_10bt_ext_dist_enable_normal;
-
-    phy_info->polarity_correction =
-        ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
-        M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
-        e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
-
-    /* Check polarity status */
-    ret_val = e1000_check_polarity(hw, &polarity);
-    if (ret_val)
-        return ret_val;
-    phy_info->cable_polarity = polarity;
-
-    ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & M88E1000_PSSR_MDIX) >>
-                          M88E1000_PSSR_MDIX_SHIFT);
-
-    if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
-        /* Cable Length Estimation and Local/Remote Receiver Information
-         * are only valid at 1000 Mbps.
-         */
-        if (hw->phy_type != e1000_phy_gg82563) {
-            phy_info->cable_length = (e1000_cable_length)((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
-                                      M88E1000_PSSR_CABLE_LENGTH_SHIFT);
-        } else {
-            ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
-                                         &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            phy_info->cable_length = (e1000_cable_length)(phy_data & GG82563_DSPD_CABLE_LENGTH);
-        }
-
-        ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
-                             SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
-                             e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-        phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
-                              SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
-                              e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-
-    }
-
-    return E1000_SUCCESS;
+	s32 ret_val;
+	u16 phy_data;
+	e1000_rev_polarity polarity;
+
+	DEBUGFUNC("e1000_phy_m88_get_info");
+
+	/* The downshift status is checked only once, after link is established,
+	 * and it stored in the hw->speed_downgraded parameter. */
+	phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+	ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_info->extended_10bt_distance =
+	    ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
+	     M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
+	    e1000_10bt_ext_dist_enable_lower :
+	    e1000_10bt_ext_dist_enable_normal;
+
+	phy_info->polarity_correction =
+	    ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
+	     M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
+	    e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
+
+	/* Check polarity status */
+	ret_val = e1000_check_polarity(hw, &polarity);
+	if (ret_val)
+		return ret_val;
+	phy_info->cable_polarity = polarity;
+
+	ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_info->mdix_mode =
+	    (e1000_auto_x_mode) ((phy_data & M88E1000_PSSR_MDIX) >>
+				 M88E1000_PSSR_MDIX_SHIFT);
+
+	if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+		/* Cable Length Estimation and Local/Remote Receiver Information
+		 * are only valid at 1000 Mbps.
+		 */
+		phy_info->cable_length =
+		    (e1000_cable_length) ((phy_data &
+					   M88E1000_PSSR_CABLE_LENGTH) >>
+					  M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+
+		ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+				      SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+		    e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+		phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+				       SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+		    e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
-* Get PHY information from various PHY registers
-*
-* hw - Struct containing variables accessed by shared code
-* phy_info - PHY information structure
-******************************************************************************/
+/**
+ * e1000_phy_get_info - request phy info
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers
+ */
 s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
 {
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_phy_get_info");
-
-    phy_info->cable_length = e1000_cable_length_undefined;
-    phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
-    phy_info->cable_polarity = e1000_rev_polarity_undefined;
-    phy_info->downshift = e1000_downshift_undefined;
-    phy_info->polarity_correction = e1000_polarity_reversal_undefined;
-    phy_info->mdix_mode = e1000_auto_x_mode_undefined;
-    phy_info->local_rx = e1000_1000t_rx_status_undefined;
-    phy_info->remote_rx = e1000_1000t_rx_status_undefined;
-
-    if (hw->media_type != e1000_media_type_copper) {
-        DEBUGOUT("PHY info is only valid for copper media\n");
-        return -E1000_ERR_CONFIG;
-    }
-
-    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-    if (ret_val)
-        return ret_val;
-
-    if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
-        DEBUGOUT("PHY info is only valid if link is up\n");
-        return -E1000_ERR_CONFIG;
-    }
-
-    if (hw->phy_type == e1000_phy_igp ||
-        hw->phy_type == e1000_phy_igp_3 ||
-        hw->phy_type == e1000_phy_igp_2)
-        return e1000_phy_igp_get_info(hw, phy_info);
-    else if (hw->phy_type == e1000_phy_ife)
-        return e1000_phy_ife_get_info(hw, phy_info);
-    else
-        return e1000_phy_m88_get_info(hw, phy_info);
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_phy_get_info");
+
+	phy_info->cable_length = e1000_cable_length_undefined;
+	phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
+	phy_info->cable_polarity = e1000_rev_polarity_undefined;
+	phy_info->downshift = e1000_downshift_undefined;
+	phy_info->polarity_correction = e1000_polarity_reversal_undefined;
+	phy_info->mdix_mode = e1000_auto_x_mode_undefined;
+	phy_info->local_rx = e1000_1000t_rx_status_undefined;
+	phy_info->remote_rx = e1000_1000t_rx_status_undefined;
+
+	if (hw->media_type != e1000_media_type_copper) {
+		DEBUGOUT("PHY info is only valid for copper media\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
+		DEBUGOUT("PHY info is only valid if link is up\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	if (hw->phy_type == e1000_phy_igp)
+		return e1000_phy_igp_get_info(hw, phy_info);
+	else
+		return e1000_phy_m88_get_info(hw, phy_info);
 }
 
 s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
 {
-    DEBUGFUNC("e1000_validate_mdi_settings");
-
-    if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
-        DEBUGOUT("Invalid MDI setting detected\n");
-        hw->mdix = 1;
-        return -E1000_ERR_CONFIG;
-    }
-    return E1000_SUCCESS;
-}
+	DEBUGFUNC("e1000_validate_mdi_settings");
 
+	if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
+		DEBUGOUT("Invalid MDI setting detected\n");
+		hw->mdix = 1;
+		return -E1000_ERR_CONFIG;
+	}
+	return E1000_SUCCESS;
+}
 
-/******************************************************************************
- * Sets up eeprom variables in the hw struct.  Must be called after mac_type
- * is configured.  Additionally, if this is ICH8, the flash controller GbE
- * registers must be mapped, or this will crash.
+/**
+ * e1000_init_eeprom_params - initialize sw eeprom vars
+ * @hw: Struct containing variables accessed by shared code
  *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+ * Sets up eeprom variables in the hw struct.  Must be called after mac_type
+ * is configured.
+ */
 s32 e1000_init_eeprom_params(struct e1000_hw *hw)
 {
-    struct e1000_eeprom_info *eeprom = &hw->eeprom;
-    u32 eecd = er32(EECD);
-    s32 ret_val = E1000_SUCCESS;
-    u16 eeprom_size;
-
-    DEBUGFUNC("e1000_init_eeprom_params");
-
-    switch (hw->mac_type) {
-    case e1000_82542_rev2_0:
-    case e1000_82542_rev2_1:
-    case e1000_82543:
-    case e1000_82544:
-        eeprom->type = e1000_eeprom_microwire;
-        eeprom->word_size = 64;
-        eeprom->opcode_bits = 3;
-        eeprom->address_bits = 6;
-        eeprom->delay_usec = 50;
-        eeprom->use_eerd = false;
-        eeprom->use_eewr = false;
-        break;
-    case e1000_82540:
-    case e1000_82545:
-    case e1000_82545_rev_3:
-    case e1000_82546:
-    case e1000_82546_rev_3:
-        eeprom->type = e1000_eeprom_microwire;
-        eeprom->opcode_bits = 3;
-        eeprom->delay_usec = 50;
-        if (eecd & E1000_EECD_SIZE) {
-            eeprom->word_size = 256;
-            eeprom->address_bits = 8;
-        } else {
-            eeprom->word_size = 64;
-            eeprom->address_bits = 6;
-        }
-        eeprom->use_eerd = false;
-        eeprom->use_eewr = false;
-        break;
-    case e1000_82541:
-    case e1000_82541_rev_2:
-    case e1000_82547:
-    case e1000_82547_rev_2:
-        if (eecd & E1000_EECD_TYPE) {
-            eeprom->type = e1000_eeprom_spi;
-            eeprom->opcode_bits = 8;
-            eeprom->delay_usec = 1;
-            if (eecd & E1000_EECD_ADDR_BITS) {
-                eeprom->page_size = 32;
-                eeprom->address_bits = 16;
-            } else {
-                eeprom->page_size = 8;
-                eeprom->address_bits = 8;
-            }
-        } else {
-            eeprom->type = e1000_eeprom_microwire;
-            eeprom->opcode_bits = 3;
-            eeprom->delay_usec = 50;
-            if (eecd & E1000_EECD_ADDR_BITS) {
-                eeprom->word_size = 256;
-                eeprom->address_bits = 8;
-            } else {
-                eeprom->word_size = 64;
-                eeprom->address_bits = 6;
-            }
-        }
-        eeprom->use_eerd = false;
-        eeprom->use_eewr = false;
-        break;
-    case e1000_82571:
-    case e1000_82572:
-        eeprom->type = e1000_eeprom_spi;
-        eeprom->opcode_bits = 8;
-        eeprom->delay_usec = 1;
-        if (eecd & E1000_EECD_ADDR_BITS) {
-            eeprom->page_size = 32;
-            eeprom->address_bits = 16;
-        } else {
-            eeprom->page_size = 8;
-            eeprom->address_bits = 8;
-        }
-        eeprom->use_eerd = false;
-        eeprom->use_eewr = false;
-        break;
-    case e1000_82573:
-        eeprom->type = e1000_eeprom_spi;
-        eeprom->opcode_bits = 8;
-        eeprom->delay_usec = 1;
-        if (eecd & E1000_EECD_ADDR_BITS) {
-            eeprom->page_size = 32;
-            eeprom->address_bits = 16;
-        } else {
-            eeprom->page_size = 8;
-            eeprom->address_bits = 8;
-        }
-        eeprom->use_eerd = true;
-        eeprom->use_eewr = true;
-        if (!e1000_is_onboard_nvm_eeprom(hw)) {
-            eeprom->type = e1000_eeprom_flash;
-            eeprom->word_size = 2048;
-
-            /* Ensure that the Autonomous FLASH update bit is cleared due to
-             * Flash update issue on parts which use a FLASH for NVM. */
-            eecd &= ~E1000_EECD_AUPDEN;
-            ew32(EECD, eecd);
-        }
-        break;
-    case e1000_80003es2lan:
-        eeprom->type = e1000_eeprom_spi;
-        eeprom->opcode_bits = 8;
-        eeprom->delay_usec = 1;
-        if (eecd & E1000_EECD_ADDR_BITS) {
-            eeprom->page_size = 32;
-            eeprom->address_bits = 16;
-        } else {
-            eeprom->page_size = 8;
-            eeprom->address_bits = 8;
-        }
-        eeprom->use_eerd = true;
-        eeprom->use_eewr = false;
-        break;
-    case e1000_ich8lan:
-        {
-        s32  i = 0;
-        u32 flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG);
-
-        eeprom->type = e1000_eeprom_ich8;
-        eeprom->use_eerd = false;
-        eeprom->use_eewr = false;
-        eeprom->word_size = E1000_SHADOW_RAM_WORDS;
-
-        /* Zero the shadow RAM structure. But don't load it from NVM
-         * so as to save time for driver init */
-        if (hw->eeprom_shadow_ram != NULL) {
-            for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
-                hw->eeprom_shadow_ram[i].modified = false;
-                hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
-            }
-        }
-
-        hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) *
-                              ICH_FLASH_SECTOR_SIZE;
-
-        hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1;
-        hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK);
-
-        hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE;
-
-        hw->flash_bank_size /= 2 * sizeof(u16);
-
-        break;
-        }
-    default:
-        break;
-    }
-
-    if (eeprom->type == e1000_eeprom_spi) {
-        /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
-         * 32KB (incremented by powers of 2).
-         */
-        if (hw->mac_type <= e1000_82547_rev_2) {
-            /* Set to default value for initial eeprom read. */
-            eeprom->word_size = 64;
-            ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
-            if (ret_val)
-                return ret_val;
-            eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
-            /* 256B eeprom size was not supported in earlier hardware, so we
-             * bump eeprom_size up one to ensure that "1" (which maps to 256B)
-             * is never the result used in the shifting logic below. */
-            if (eeprom_size)
-                eeprom_size++;
-        } else {
-            eeprom_size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
-                          E1000_EECD_SIZE_EX_SHIFT);
-        }
-
-        eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
-    }
-    return ret_val;
+	struct e1000_eeprom_info *eeprom = &hw->eeprom;
+	u32 eecd = er32(EECD);
+	s32 ret_val = E1000_SUCCESS;
+	u16 eeprom_size;
+
+	DEBUGFUNC("e1000_init_eeprom_params");
+
+	switch (hw->mac_type) {
+	case e1000_82542_rev2_0:
+	case e1000_82542_rev2_1:
+	case e1000_82543:
+	case e1000_82544:
+		eeprom->type = e1000_eeprom_microwire;
+		eeprom->word_size = 64;
+		eeprom->opcode_bits = 3;
+		eeprom->address_bits = 6;
+		eeprom->delay_usec = 50;
+		break;
+	case e1000_82540:
+	case e1000_82545:
+	case e1000_82545_rev_3:
+	case e1000_82546:
+	case e1000_82546_rev_3:
+		eeprom->type = e1000_eeprom_microwire;
+		eeprom->opcode_bits = 3;
+		eeprom->delay_usec = 50;
+		if (eecd & E1000_EECD_SIZE) {
+			eeprom->word_size = 256;
+			eeprom->address_bits = 8;
+		} else {
+			eeprom->word_size = 64;
+			eeprom->address_bits = 6;
+		}
+		break;
+	case e1000_82541:
+	case e1000_82541_rev_2:
+	case e1000_82547:
+	case e1000_82547_rev_2:
+		if (eecd & E1000_EECD_TYPE) {
+			eeprom->type = e1000_eeprom_spi;
+			eeprom->opcode_bits = 8;
+			eeprom->delay_usec = 1;
+			if (eecd & E1000_EECD_ADDR_BITS) {
+				eeprom->page_size = 32;
+				eeprom->address_bits = 16;
+			} else {
+				eeprom->page_size = 8;
+				eeprom->address_bits = 8;
+			}
+		} else {
+			eeprom->type = e1000_eeprom_microwire;
+			eeprom->opcode_bits = 3;
+			eeprom->delay_usec = 50;
+			if (eecd & E1000_EECD_ADDR_BITS) {
+				eeprom->word_size = 256;
+				eeprom->address_bits = 8;
+			} else {
+				eeprom->word_size = 64;
+				eeprom->address_bits = 6;
+			}
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (eeprom->type == e1000_eeprom_spi) {
+		/* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
+		 * 32KB (incremented by powers of 2).
+		 */
+		/* Set to default value for initial eeprom read. */
+		eeprom->word_size = 64;
+		ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
+		if (ret_val)
+			return ret_val;
+		eeprom_size =
+		    (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
+		/* 256B eeprom size was not supported in earlier hardware, so we
+		 * bump eeprom_size up one to ensure that "1" (which maps to 256B)
+		 * is never the result used in the shifting logic below. */
+		if (eeprom_size)
+			eeprom_size++;
+
+		eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
+	}
+	return ret_val;
 }
 
-/******************************************************************************
- * Raises the EEPROM's clock input.
- *
- * hw - Struct containing variables accessed by shared code
- * eecd - EECD's current value
- *****************************************************************************/
+/**
+ * e1000_raise_ee_clk - Raises the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
 static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
 {
-    /* Raise the clock input to the EEPROM (by setting the SK bit), and then
-     * wait <delay> microseconds.
-     */
-    *eecd = *eecd | E1000_EECD_SK;
-    ew32(EECD, *eecd);
-    E1000_WRITE_FLUSH();
-    udelay(hw->eeprom.delay_usec);
+	/* Raise the clock input to the EEPROM (by setting the SK bit), and then
+	 * wait <delay> microseconds.
+	 */
+	*eecd = *eecd | E1000_EECD_SK;
+	ew32(EECD, *eecd);
+	E1000_WRITE_FLUSH();
+	udelay(hw->eeprom.delay_usec);
 }
 
-/******************************************************************************
- * Lowers the EEPROM's clock input.
- *
- * hw - Struct containing variables accessed by shared code
- * eecd - EECD's current value
- *****************************************************************************/
+/**
+ * e1000_lower_ee_clk - Lowers the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
 static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
 {
-    /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
-     * wait 50 microseconds.
-     */
-    *eecd = *eecd & ~E1000_EECD_SK;
-    ew32(EECD, *eecd);
-    E1000_WRITE_FLUSH();
-    udelay(hw->eeprom.delay_usec);
+	/* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+	 * wait 50 microseconds.
+	 */
+	*eecd = *eecd & ~E1000_EECD_SK;
+	ew32(EECD, *eecd);
+	E1000_WRITE_FLUSH();
+	udelay(hw->eeprom.delay_usec);
 }
 
-/******************************************************************************
- * Shift data bits out to the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * data - data to send to the EEPROM
- * count - number of bits to shift out
- *****************************************************************************/
+/**
+ * e1000_shift_out_ee_bits - Shift data bits out to the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ */
 static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
 {
-    struct e1000_eeprom_info *eeprom = &hw->eeprom;
-    u32 eecd;
-    u32 mask;
-
-    /* We need to shift "count" bits out to the EEPROM. So, value in the
-     * "data" parameter will be shifted out to the EEPROM one bit at a time.
-     * In order to do this, "data" must be broken down into bits.
-     */
-    mask = 0x01 << (count - 1);
-    eecd = er32(EECD);
-    if (eeprom->type == e1000_eeprom_microwire) {
-        eecd &= ~E1000_EECD_DO;
-    } else if (eeprom->type == e1000_eeprom_spi) {
-        eecd |= E1000_EECD_DO;
-    }
-    do {
-        /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
-         * and then raising and then lowering the clock (the SK bit controls
-         * the clock input to the EEPROM).  A "0" is shifted out to the EEPROM
-         * by setting "DI" to "0" and then raising and then lowering the clock.
-         */
-        eecd &= ~E1000_EECD_DI;
-
-        if (data & mask)
-            eecd |= E1000_EECD_DI;
-
-        ew32(EECD, eecd);
-        E1000_WRITE_FLUSH();
-
-        udelay(eeprom->delay_usec);
-
-        e1000_raise_ee_clk(hw, &eecd);
-        e1000_lower_ee_clk(hw, &eecd);
-
-        mask = mask >> 1;
-
-    } while (mask);
-
-    /* We leave the "DI" bit set to "0" when we leave this routine. */
-    eecd &= ~E1000_EECD_DI;
-    ew32(EECD, eecd);
+	struct e1000_eeprom_info *eeprom = &hw->eeprom;
+	u32 eecd;
+	u32 mask;
+
+	/* We need to shift "count" bits out to the EEPROM. So, value in the
+	 * "data" parameter will be shifted out to the EEPROM one bit at a time.
+	 * In order to do this, "data" must be broken down into bits.
+	 */
+	mask = 0x01 << (count - 1);
+	eecd = er32(EECD);
+	if (eeprom->type == e1000_eeprom_microwire) {
+		eecd &= ~E1000_EECD_DO;
+	} else if (eeprom->type == e1000_eeprom_spi) {
+		eecd |= E1000_EECD_DO;
+	}
+	do {
+		/* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+		 * and then raising and then lowering the clock (the SK bit controls
+		 * the clock input to the EEPROM).  A "0" is shifted out to the EEPROM
+		 * by setting "DI" to "0" and then raising and then lowering the clock.
+		 */
+		eecd &= ~E1000_EECD_DI;
+
+		if (data & mask)
+			eecd |= E1000_EECD_DI;
+
+		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
+
+		udelay(eeprom->delay_usec);
+
+		e1000_raise_ee_clk(hw, &eecd);
+		e1000_lower_ee_clk(hw, &eecd);
+
+		mask = mask >> 1;
+
+	} while (mask);
+
+	/* We leave the "DI" bit set to "0" when we leave this routine. */
+	eecd &= ~E1000_EECD_DI;
+	ew32(EECD, eecd);
 }
 
-/******************************************************************************
- * Shift data bits in from the EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_shift_in_ee_bits - Shift data bits in from the EEPROM
+ * @hw: Struct containing variables accessed by shared code
+ * @count: number of bits to shift in
+ */
 static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
 {
-    u32 eecd;
-    u32 i;
-    u16 data;
+	u32 eecd;
+	u32 i;
+	u16 data;
 
-    /* In order to read a register from the EEPROM, we need to shift 'count'
-     * bits in from the EEPROM. Bits are "shifted in" by raising the clock
-     * input to the EEPROM (setting the SK bit), and then reading the value of
-     * the "DO" bit.  During this "shifting in" process the "DI" bit should
-     * always be clear.
-     */
+	/* In order to read a register from the EEPROM, we need to shift 'count'
+	 * bits in from the EEPROM. Bits are "shifted in" by raising the clock
+	 * input to the EEPROM (setting the SK bit), and then reading the value of
+	 * the "DO" bit.  During this "shifting in" process the "DI" bit should
+	 * always be clear.
+	 */
 
-    eecd = er32(EECD);
+	eecd = er32(EECD);
 
-    eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
-    data = 0;
+	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+	data = 0;
 
-    for (i = 0; i < count; i++) {
-        data = data << 1;
-        e1000_raise_ee_clk(hw, &eecd);
+	for (i = 0; i < count; i++) {
+		data = data << 1;
+		e1000_raise_ee_clk(hw, &eecd);
 
-        eecd = er32(EECD);
+		eecd = er32(EECD);
 
-        eecd &= ~(E1000_EECD_DI);
-        if (eecd & E1000_EECD_DO)
-            data |= 1;
+		eecd &= ~(E1000_EECD_DI);
+		if (eecd & E1000_EECD_DO)
+			data |= 1;
 
-        e1000_lower_ee_clk(hw, &eecd);
-    }
+		e1000_lower_ee_clk(hw, &eecd);
+	}
 
-    return data;
+	return data;
 }
 
-/******************************************************************************
- * Prepares EEPROM for access
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_acquire_eeprom - Prepares EEPROM for access
+ * @hw: Struct containing variables accessed by shared code
  *
  * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
  * function should be called before issuing a command to the EEPROM.
- *****************************************************************************/
+ */
 static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
 {
-    struct e1000_eeprom_info *eeprom = &hw->eeprom;
-    u32 eecd, i=0;
-
-    DEBUGFUNC("e1000_acquire_eeprom");
-
-    if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
-        return -E1000_ERR_SWFW_SYNC;
-    eecd = er32(EECD);
-
-    if (hw->mac_type != e1000_82573) {
-        /* Request EEPROM Access */
-        if (hw->mac_type > e1000_82544) {
-            eecd |= E1000_EECD_REQ;
-            ew32(EECD, eecd);
-            eecd = er32(EECD);
-            while ((!(eecd & E1000_EECD_GNT)) &&
-                  (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
-                i++;
-                udelay(5);
-                eecd = er32(EECD);
-            }
-            if (!(eecd & E1000_EECD_GNT)) {
-                eecd &= ~E1000_EECD_REQ;
-                ew32(EECD, eecd);
-                DEBUGOUT("Could not acquire EEPROM grant\n");
-                e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
-                return -E1000_ERR_EEPROM;
-            }
-        }
-    }
-
-    /* Setup EEPROM for Read/Write */
-
-    if (eeprom->type == e1000_eeprom_microwire) {
-        /* Clear SK and DI */
-        eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
-        ew32(EECD, eecd);
-
-        /* Set CS */
-        eecd |= E1000_EECD_CS;
-        ew32(EECD, eecd);
-    } else if (eeprom->type == e1000_eeprom_spi) {
-        /* Clear SK and CS */
-        eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-        ew32(EECD, eecd);
-        udelay(1);
-    }
-
-    return E1000_SUCCESS;
+	struct e1000_eeprom_info *eeprom = &hw->eeprom;
+	u32 eecd, i = 0;
+
+	DEBUGFUNC("e1000_acquire_eeprom");
+
+	eecd = er32(EECD);
+
+	/* Request EEPROM Access */
+	if (hw->mac_type > e1000_82544) {
+		eecd |= E1000_EECD_REQ;
+		ew32(EECD, eecd);
+		eecd = er32(EECD);
+		while ((!(eecd & E1000_EECD_GNT)) &&
+		       (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
+			i++;
+			udelay(5);
+			eecd = er32(EECD);
+		}
+		if (!(eecd & E1000_EECD_GNT)) {
+			eecd &= ~E1000_EECD_REQ;
+			ew32(EECD, eecd);
+			DEBUGOUT("Could not acquire EEPROM grant\n");
+			return -E1000_ERR_EEPROM;
+		}
+	}
+
+	/* Setup EEPROM for Read/Write */
+
+	if (eeprom->type == e1000_eeprom_microwire) {
+		/* Clear SK and DI */
+		eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
+		ew32(EECD, eecd);
+
+		/* Set CS */
+		eecd |= E1000_EECD_CS;
+		ew32(EECD, eecd);
+	} else if (eeprom->type == e1000_eeprom_spi) {
+		/* Clear SK and CS */
+		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+		ew32(EECD, eecd);
+		udelay(1);
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Returns EEPROM to a "standby" state
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: Struct containing variables accessed by shared code
+ */
 static void e1000_standby_eeprom(struct e1000_hw *hw)
 {
-    struct e1000_eeprom_info *eeprom = &hw->eeprom;
-    u32 eecd;
-
-    eecd = er32(EECD);
-
-    if (eeprom->type == e1000_eeprom_microwire) {
-        eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-        ew32(EECD, eecd);
-        E1000_WRITE_FLUSH();
-        udelay(eeprom->delay_usec);
-
-        /* Clock high */
-        eecd |= E1000_EECD_SK;
-        ew32(EECD, eecd);
-        E1000_WRITE_FLUSH();
-        udelay(eeprom->delay_usec);
-
-        /* Select EEPROM */
-        eecd |= E1000_EECD_CS;
-        ew32(EECD, eecd);
-        E1000_WRITE_FLUSH();
-        udelay(eeprom->delay_usec);
-
-        /* Clock low */
-        eecd &= ~E1000_EECD_SK;
-        ew32(EECD, eecd);
-        E1000_WRITE_FLUSH();
-        udelay(eeprom->delay_usec);
-    } else if (eeprom->type == e1000_eeprom_spi) {
-        /* Toggle CS to flush commands */
-        eecd |= E1000_EECD_CS;
-        ew32(EECD, eecd);
-        E1000_WRITE_FLUSH();
-        udelay(eeprom->delay_usec);
-        eecd &= ~E1000_EECD_CS;
-        ew32(EECD, eecd);
-        E1000_WRITE_FLUSH();
-        udelay(eeprom->delay_usec);
-    }
+	struct e1000_eeprom_info *eeprom = &hw->eeprom;
+	u32 eecd;
+
+	eecd = er32(EECD);
+
+	if (eeprom->type == e1000_eeprom_microwire) {
+		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
+		udelay(eeprom->delay_usec);
+
+		/* Clock high */
+		eecd |= E1000_EECD_SK;
+		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
+		udelay(eeprom->delay_usec);
+
+		/* Select EEPROM */
+		eecd |= E1000_EECD_CS;
+		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
+		udelay(eeprom->delay_usec);
+
+		/* Clock low */
+		eecd &= ~E1000_EECD_SK;
+		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
+		udelay(eeprom->delay_usec);
+	} else if (eeprom->type == e1000_eeprom_spi) {
+		/* Toggle CS to flush commands */
+		eecd |= E1000_EECD_CS;
+		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
+		udelay(eeprom->delay_usec);
+		eecd &= ~E1000_EECD_CS;
+		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
+		udelay(eeprom->delay_usec);
+	}
 }
 
-/******************************************************************************
- * Terminates a command by inverting the EEPROM's chip select pin
+/**
+ * e1000_release_eeprom - drop chip select
+ * @hw: Struct containing variables accessed by shared code
  *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+ * Terminates a command by inverting the EEPROM's chip select pin
+ */
 static void e1000_release_eeprom(struct e1000_hw *hw)
 {
-    u32 eecd;
-
-    DEBUGFUNC("e1000_release_eeprom");
+	u32 eecd;
 
-    eecd = er32(EECD);
+	DEBUGFUNC("e1000_release_eeprom");
 
-    if (hw->eeprom.type == e1000_eeprom_spi) {
-        eecd |= E1000_EECD_CS;  /* Pull CS high */
-        eecd &= ~E1000_EECD_SK; /* Lower SCK */
+	eecd = er32(EECD);
 
-        ew32(EECD, eecd);
+	if (hw->eeprom.type == e1000_eeprom_spi) {
+		eecd |= E1000_EECD_CS;	/* Pull CS high */
+		eecd &= ~E1000_EECD_SK;	/* Lower SCK */
 
-        udelay(hw->eeprom.delay_usec);
-    } else if (hw->eeprom.type == e1000_eeprom_microwire) {
-        /* cleanup eeprom */
+		ew32(EECD, eecd);
 
-        /* CS on Microwire is active-high */
-        eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+		udelay(hw->eeprom.delay_usec);
+	} else if (hw->eeprom.type == e1000_eeprom_microwire) {
+		/* cleanup eeprom */
 
-        ew32(EECD, eecd);
+		/* CS on Microwire is active-high */
+		eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
 
-        /* Rising edge of clock */
-        eecd |= E1000_EECD_SK;
-        ew32(EECD, eecd);
-        E1000_WRITE_FLUSH();
-        udelay(hw->eeprom.delay_usec);
+		ew32(EECD, eecd);
 
-        /* Falling edge of clock */
-        eecd &= ~E1000_EECD_SK;
-        ew32(EECD, eecd);
-        E1000_WRITE_FLUSH();
-        udelay(hw->eeprom.delay_usec);
-    }
+		/* Rising edge of clock */
+		eecd |= E1000_EECD_SK;
+		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
+		udelay(hw->eeprom.delay_usec);
 
-    /* Stop requesting EEPROM access */
-    if (hw->mac_type > e1000_82544) {
-        eecd &= ~E1000_EECD_REQ;
-        ew32(EECD, eecd);
-    }
+		/* Falling edge of clock */
+		eecd &= ~E1000_EECD_SK;
+		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
+		udelay(hw->eeprom.delay_usec);
+	}
 
-    e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
+	/* Stop requesting EEPROM access */
+	if (hw->mac_type > e1000_82544) {
+		eecd &= ~E1000_EECD_REQ;
+		ew32(EECD, eecd);
+	}
 }
 
-/******************************************************************************
- * Reads a 16 bit word from the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_spi_eeprom_ready - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ */
 static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
 {
-    u16 retry_count = 0;
-    u8 spi_stat_reg;
-
-    DEBUGFUNC("e1000_spi_eeprom_ready");
-
-    /* Read "Status Register" repeatedly until the LSB is cleared.  The
-     * EEPROM will signal that the command has been completed by clearing
-     * bit 0 of the internal status register.  If it's not cleared within
-     * 5 milliseconds, then error out.
-     */
-    retry_count = 0;
-    do {
-        e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
-                                hw->eeprom.opcode_bits);
-        spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8);
-        if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
-            break;
-
-        udelay(5);
-        retry_count += 5;
-
-        e1000_standby_eeprom(hw);
-    } while (retry_count < EEPROM_MAX_RETRY_SPI);
-
-    /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
-     * only 0-5mSec on 5V devices)
-     */
-    if (retry_count >= EEPROM_MAX_RETRY_SPI) {
-        DEBUGOUT("SPI EEPROM Status error\n");
-        return -E1000_ERR_EEPROM;
-    }
-
-    return E1000_SUCCESS;
-}
-
-/******************************************************************************
- * Reads a 16 bit word from the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of  word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
-    s32 ret;
-    spin_lock(&e1000_eeprom_lock);
-    ret = e1000_do_read_eeprom(hw, offset, words, data);
-    spin_unlock(&e1000_eeprom_lock);
-    return ret;
-}
-
-static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
-    struct e1000_eeprom_info *eeprom = &hw->eeprom;
-    u32 i = 0;
-
-    DEBUGFUNC("e1000_read_eeprom");
-
-    /* If eeprom is not yet detected, do so now */
-    if (eeprom->word_size == 0)
-        e1000_init_eeprom_params(hw);
-
-    /* A check for invalid values:  offset too large, too many words, and not
-     * enough words.
-     */
-    if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
-       (words == 0)) {
-        DEBUGOUT2("\"words\" parameter out of bounds. Words = %d, size = %d\n", offset, eeprom->word_size);
-        return -E1000_ERR_EEPROM;
-    }
-
-    /* EEPROM's that don't use EERD to read require us to bit-bang the SPI
-     * directly. In this case, we need to acquire the EEPROM so that
-     * FW or other port software does not interrupt.
-     */
-    if (e1000_is_onboard_nvm_eeprom(hw) && !hw->eeprom.use_eerd) {
-        /* Prepare the EEPROM for bit-bang reading */
-        if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
-            return -E1000_ERR_EEPROM;
-    }
-
-    /* Eerd register EEPROM access requires no eeprom aquire/release */
-    if (eeprom->use_eerd)
-        return e1000_read_eeprom_eerd(hw, offset, words, data);
-
-    /* ICH EEPROM access is done via the ICH flash controller */
-    if (eeprom->type == e1000_eeprom_ich8)
-        return e1000_read_eeprom_ich8(hw, offset, words, data);
-
-    /* Set up the SPI or Microwire EEPROM for bit-bang reading.  We have
-     * acquired the EEPROM at this point, so any returns should relase it */
-    if (eeprom->type == e1000_eeprom_spi) {
-        u16 word_in;
-        u8 read_opcode = EEPROM_READ_OPCODE_SPI;
-
-        if (e1000_spi_eeprom_ready(hw)) {
-            e1000_release_eeprom(hw);
-            return -E1000_ERR_EEPROM;
-        }
-
-        e1000_standby_eeprom(hw);
-
-        /* Some SPI eeproms use the 8th address bit embedded in the opcode */
-        if ((eeprom->address_bits == 8) && (offset >= 128))
-            read_opcode |= EEPROM_A8_OPCODE_SPI;
-
-        /* Send the READ command (opcode + addr)  */
-        e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
-        e1000_shift_out_ee_bits(hw, (u16)(offset*2), eeprom->address_bits);
-
-        /* Read the data.  The address of the eeprom internally increments with
-         * each byte (spi) being read, saving on the overhead of eeprom setup
-         * and tear-down.  The address counter will roll over if reading beyond
-         * the size of the eeprom, thus allowing the entire memory to be read
-         * starting from any offset. */
-        for (i = 0; i < words; i++) {
-            word_in = e1000_shift_in_ee_bits(hw, 16);
-            data[i] = (word_in >> 8) | (word_in << 8);
-        }
-    } else if (eeprom->type == e1000_eeprom_microwire) {
-        for (i = 0; i < words; i++) {
-            /* Send the READ command (opcode + addr)  */
-            e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE,
-                                    eeprom->opcode_bits);
-            e1000_shift_out_ee_bits(hw, (u16)(offset + i),
-                                    eeprom->address_bits);
-
-            /* Read the data.  For microwire, each word requires the overhead
-             * of eeprom setup and tear-down. */
-            data[i] = e1000_shift_in_ee_bits(hw, 16);
-            e1000_standby_eeprom(hw);
-        }
-    }
-
-    /* End this read operation */
-    e1000_release_eeprom(hw);
-
-    return E1000_SUCCESS;
-}
+	u16 retry_count = 0;
+	u8 spi_stat_reg;
 
-/******************************************************************************
- * Reads a 16 bit word from the EEPROM using the EERD register.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of  word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
-				  u16 *data)
-{
-    u32 i, eerd = 0;
-    s32 error = 0;
+	DEBUGFUNC("e1000_spi_eeprom_ready");
 
-    for (i = 0; i < words; i++) {
-        eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) +
-                         E1000_EEPROM_RW_REG_START;
+	/* Read "Status Register" repeatedly until the LSB is cleared.  The
+	 * EEPROM will signal that the command has been completed by clearing
+	 * bit 0 of the internal status register.  If it's not cleared within
+	 * 5 milliseconds, then error out.
+	 */
+	retry_count = 0;
+	do {
+		e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
+					hw->eeprom.opcode_bits);
+		spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8);
+		if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
+			break;
 
-        ew32(EERD, eerd);
-        error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
+		udelay(5);
+		retry_count += 5;
 
-        if (error) {
-            break;
-        }
-        data[i] = (er32(EERD) >> E1000_EEPROM_RW_REG_DATA);
+		e1000_standby_eeprom(hw);
+	} while (retry_count < EEPROM_MAX_RETRY_SPI);
 
-    }
+	/* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
+	 * only 0-5mSec on 5V devices)
+	 */
+	if (retry_count >= EEPROM_MAX_RETRY_SPI) {
+		DEBUGOUT("SPI EEPROM Status error\n");
+		return -E1000_ERR_EEPROM;
+	}
 
-    return error;
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Writes a 16 bit word from the EEPROM using the EEWR register.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of  word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
-				   u16 *data)
+/**
+ * e1000_read_eeprom - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset of  word in the EEPROM to read
+ * @data: word read from the EEPROM
+ * @words: number of words to read
+ */
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
-    u32    register_value = 0;
-    u32    i              = 0;
-    s32     error          = 0;
-
-    if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
-        return -E1000_ERR_SWFW_SYNC;
-
-    for (i = 0; i < words; i++) {
-        register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
-                         ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
-                         E1000_EEPROM_RW_REG_START;
-
-        error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
-        if (error) {
-            break;
-        }
-
-        ew32(EEWR, register_value);
-
-        error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
-
-        if (error) {
-            break;
-        }
-    }
-
-    e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
-    return error;
+	s32 ret;
+	spin_lock(&e1000_eeprom_lock);
+	ret = e1000_do_read_eeprom(hw, offset, words, data);
+	spin_unlock(&e1000_eeprom_lock);
+	return ret;
 }
 
-/******************************************************************************
- * Polls the status bit (bit 1) of the EERD to determine when the read is done.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+				u16 *data)
 {
-    u32 attempts = 100000;
-    u32 i, reg = 0;
-    s32 done = E1000_ERR_EEPROM;
-
-    for (i = 0; i < attempts; i++) {
-        if (eerd == E1000_EEPROM_POLL_READ)
-            reg = er32(EERD);
-        else
-            reg = er32(EEWR);
-
-        if (reg & E1000_EEPROM_RW_REG_DONE) {
-            done = E1000_SUCCESS;
-            break;
-        }
-        udelay(5);
-    }
-
-    return done;
-}
+	struct e1000_eeprom_info *eeprom = &hw->eeprom;
+	u32 i = 0;
 
-/***************************************************************************
-* Description:     Determines if the onboard NVM is FLASH or EEPROM.
-*
-* hw - Struct containing variables accessed by shared code
-****************************************************************************/
-static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
-{
-    u32 eecd = 0;
+	DEBUGFUNC("e1000_read_eeprom");
 
-    DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
+	/* If eeprom is not yet detected, do so now */
+	if (eeprom->word_size == 0)
+		e1000_init_eeprom_params(hw);
+
+	/* A check for invalid values:  offset too large, too many words, and not
+	 * enough words.
+	 */
+	if ((offset >= eeprom->word_size)
+	    || (words > eeprom->word_size - offset) || (words == 0)) {
+		DEBUGOUT2
+		    ("\"words\" parameter out of bounds. Words = %d, size = %d\n",
+		     offset, eeprom->word_size);
+		return -E1000_ERR_EEPROM;
+	}
 
-    if (hw->mac_type == e1000_ich8lan)
-        return false;
+	/* EEPROM's that don't use EERD to read require us to bit-bang the SPI
+	 * directly. In this case, we need to acquire the EEPROM so that
+	 * FW or other port software does not interrupt.
+	 */
+	/* Prepare the EEPROM for bit-bang reading */
+	if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+		return -E1000_ERR_EEPROM;
+
+	/* Set up the SPI or Microwire EEPROM for bit-bang reading.  We have
+	 * acquired the EEPROM at this point, so any returns should release it */
+	if (eeprom->type == e1000_eeprom_spi) {
+		u16 word_in;
+		u8 read_opcode = EEPROM_READ_OPCODE_SPI;
+
+		if (e1000_spi_eeprom_ready(hw)) {
+			e1000_release_eeprom(hw);
+			return -E1000_ERR_EEPROM;
+		}
 
-    if (hw->mac_type == e1000_82573) {
-        eecd = er32(EECD);
+		e1000_standby_eeprom(hw);
+
+		/* Some SPI eeproms use the 8th address bit embedded in the opcode */
+		if ((eeprom->address_bits == 8) && (offset >= 128))
+			read_opcode |= EEPROM_A8_OPCODE_SPI;
+
+		/* Send the READ command (opcode + addr)  */
+		e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
+		e1000_shift_out_ee_bits(hw, (u16) (offset * 2),
+					eeprom->address_bits);
+
+		/* Read the data.  The address of the eeprom internally increments with
+		 * each byte (spi) being read, saving on the overhead of eeprom setup
+		 * and tear-down.  The address counter will roll over if reading beyond
+		 * the size of the eeprom, thus allowing the entire memory to be read
+		 * starting from any offset. */
+		for (i = 0; i < words; i++) {
+			word_in = e1000_shift_in_ee_bits(hw, 16);
+			data[i] = (word_in >> 8) | (word_in << 8);
+		}
+	} else if (eeprom->type == e1000_eeprom_microwire) {
+		for (i = 0; i < words; i++) {
+			/* Send the READ command (opcode + addr)  */
+			e1000_shift_out_ee_bits(hw,
+						EEPROM_READ_OPCODE_MICROWIRE,
+						eeprom->opcode_bits);
+			e1000_shift_out_ee_bits(hw, (u16) (offset + i),
+						eeprom->address_bits);
+
+			/* Read the data.  For microwire, each word requires the overhead
+			 * of eeprom setup and tear-down. */
+			data[i] = e1000_shift_in_ee_bits(hw, 16);
+			e1000_standby_eeprom(hw);
+		}
+	}
 
-        /* Isolate bits 15 & 16 */
-        eecd = ((eecd >> 15) & 0x03);
+	/* End this read operation */
+	e1000_release_eeprom(hw);
 
-        /* If both bits are set, device is Flash type */
-        if (eecd == 0x03) {
-            return false;
-        }
-    }
-    return true;
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Verifies that the EEPROM has a valid checksum
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_validate_eeprom_checksum - Verifies that the EEPROM has a valid checksum
+ * @hw: Struct containing variables accessed by shared code
  *
  * Reads the first 64 16 bit words of the EEPROM and sums the values read.
  * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
  * valid.
- *****************************************************************************/
+ */
 s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
 {
-    u16 checksum = 0;
-    u16 i, eeprom_data;
-
-    DEBUGFUNC("e1000_validate_eeprom_checksum");
-
-    if ((hw->mac_type == e1000_82573) && !e1000_is_onboard_nvm_eeprom(hw)) {
-        /* Check bit 4 of word 10h.  If it is 0, firmware is done updating
-         * 10h-12h.  Checksum may need to be fixed. */
-        e1000_read_eeprom(hw, 0x10, 1, &eeprom_data);
-        if ((eeprom_data & 0x10) == 0) {
-            /* Read 0x23 and check bit 15.  This bit is a 1 when the checksum
-             * has already been fixed.  If the checksum is still wrong and this
-             * bit is a 1, we need to return bad checksum.  Otherwise, we need
-             * to set this bit to a 1 and update the checksum. */
-            e1000_read_eeprom(hw, 0x23, 1, &eeprom_data);
-            if ((eeprom_data & 0x8000) == 0) {
-                eeprom_data |= 0x8000;
-                e1000_write_eeprom(hw, 0x23, 1, &eeprom_data);
-                e1000_update_eeprom_checksum(hw);
-            }
-        }
-    }
-
-    if (hw->mac_type == e1000_ich8lan) {
-        /* Drivers must allocate the shadow ram structure for the
-         * EEPROM checksum to be updated.  Otherwise, this bit as well
-         * as the checksum must both be set correctly for this
-         * validation to pass.
-         */
-        e1000_read_eeprom(hw, 0x19, 1, &eeprom_data);
-        if ((eeprom_data & 0x40) == 0) {
-            eeprom_data |= 0x40;
-            e1000_write_eeprom(hw, 0x19, 1, &eeprom_data);
-            e1000_update_eeprom_checksum(hw);
-        }
-    }
-
-    for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
-        if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
-            DEBUGOUT("EEPROM Read Error\n");
-            return -E1000_ERR_EEPROM;
-        }
-        checksum += eeprom_data;
-    }
-
-    if (checksum == (u16)EEPROM_SUM)
-        return E1000_SUCCESS;
-    else {
-        DEBUGOUT("EEPROM Checksum Invalid\n");
-        return -E1000_ERR_EEPROM;
-    }
+	u16 checksum = 0;
+	u16 i, eeprom_data;
+
+	DEBUGFUNC("e1000_validate_eeprom_checksum");
+
+	for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+		if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+			DEBUGOUT("EEPROM Read Error\n");
+			return -E1000_ERR_EEPROM;
+		}
+		checksum += eeprom_data;
+	}
+
+	if (checksum == (u16) EEPROM_SUM)
+		return E1000_SUCCESS;
+	else {
+		DEBUGOUT("EEPROM Checksum Invalid\n");
+		return -E1000_ERR_EEPROM;
+	}
 }
 
-/******************************************************************************
- * Calculates the EEPROM checksum and writes it to the EEPROM
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_update_eeprom_checksum - Calculates/writes the EEPROM checksum
+ * @hw: Struct containing variables accessed by shared code
  *
  * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
  * Writes the difference to word offset 63 of the EEPROM.
- *****************************************************************************/
+ */
 s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
 {
-    u32 ctrl_ext;
-    u16 checksum = 0;
-    u16 i, eeprom_data;
-
-    DEBUGFUNC("e1000_update_eeprom_checksum");
-
-    for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
-        if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
-            DEBUGOUT("EEPROM Read Error\n");
-            return -E1000_ERR_EEPROM;
-        }
-        checksum += eeprom_data;
-    }
-    checksum = (u16)EEPROM_SUM - checksum;
-    if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
-        DEBUGOUT("EEPROM Write Error\n");
-        return -E1000_ERR_EEPROM;
-    } else if (hw->eeprom.type == e1000_eeprom_flash) {
-        e1000_commit_shadow_ram(hw);
-    } else if (hw->eeprom.type == e1000_eeprom_ich8) {
-        e1000_commit_shadow_ram(hw);
-        /* Reload the EEPROM, or else modifications will not appear
-         * until after next adapter reset. */
-        ctrl_ext = er32(CTRL_EXT);
-        ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-        ew32(CTRL_EXT, ctrl_ext);
-        msleep(10);
-    }
-    return E1000_SUCCESS;
+	u16 checksum = 0;
+	u16 i, eeprom_data;
+
+	DEBUGFUNC("e1000_update_eeprom_checksum");
+
+	for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
+		if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+			DEBUGOUT("EEPROM Read Error\n");
+			return -E1000_ERR_EEPROM;
+		}
+		checksum += eeprom_data;
+	}
+	checksum = (u16) EEPROM_SUM - checksum;
+	if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
+		DEBUGOUT("EEPROM Write Error\n");
+		return -E1000_ERR_EEPROM;
+	}
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Parent function for writing words to the different EEPROM types.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset within the EEPROM to be written to
- * words - number of words to write
- * data - 16 bit word to be written to the EEPROM
+/**
+ * e1000_write_eeprom - write words to the different EEPROM types.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word to be written to the EEPROM
  *
  * If e1000_update_eeprom_checksum is not called after this function, the
  * EEPROM will most likely contain an invalid checksum.
- *****************************************************************************/
+ */
 s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
-    s32 ret;
-    spin_lock(&e1000_eeprom_lock);
-    ret = e1000_do_write_eeprom(hw, offset, words, data);
-    spin_unlock(&e1000_eeprom_lock);
-    return ret;
+	s32 ret;
+	spin_lock(&e1000_eeprom_lock);
+	ret = e1000_do_write_eeprom(hw, offset, words, data);
+	spin_unlock(&e1000_eeprom_lock);
+	return ret;
 }
 
-
-static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+				 u16 *data)
 {
-    struct e1000_eeprom_info *eeprom = &hw->eeprom;
-    s32 status = 0;
-
-    DEBUGFUNC("e1000_write_eeprom");
-
-    /* If eeprom is not yet detected, do so now */
-    if (eeprom->word_size == 0)
-        e1000_init_eeprom_params(hw);
-
-    /* A check for invalid values:  offset too large, too many words, and not
-     * enough words.
-     */
-    if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
-       (words == 0)) {
-        DEBUGOUT("\"words\" parameter out of bounds\n");
-        return -E1000_ERR_EEPROM;
-    }
-
-    /* 82573 writes only through eewr */
-    if (eeprom->use_eewr)
-        return e1000_write_eeprom_eewr(hw, offset, words, data);
-
-    if (eeprom->type == e1000_eeprom_ich8)
-        return e1000_write_eeprom_ich8(hw, offset, words, data);
-
-    /* Prepare the EEPROM for writing  */
-    if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
-        return -E1000_ERR_EEPROM;
-
-    if (eeprom->type == e1000_eeprom_microwire) {
-        status = e1000_write_eeprom_microwire(hw, offset, words, data);
-    } else {
-        status = e1000_write_eeprom_spi(hw, offset, words, data);
-        msleep(10);
-    }
-
-    /* Done with writing */
-    e1000_release_eeprom(hw);
-
-    return status;
+	struct e1000_eeprom_info *eeprom = &hw->eeprom;
+	s32 status = 0;
+
+	DEBUGFUNC("e1000_write_eeprom");
+
+	/* If eeprom is not yet detected, do so now */
+	if (eeprom->word_size == 0)
+		e1000_init_eeprom_params(hw);
+
+	/* A check for invalid values:  offset too large, too many words, and not
+	 * enough words.
+	 */
+	if ((offset >= eeprom->word_size)
+	    || (words > eeprom->word_size - offset) || (words == 0)) {
+		DEBUGOUT("\"words\" parameter out of bounds\n");
+		return -E1000_ERR_EEPROM;
+	}
+
+	/* Prepare the EEPROM for writing  */
+	if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+		return -E1000_ERR_EEPROM;
+
+	if (eeprom->type == e1000_eeprom_microwire) {
+		status = e1000_write_eeprom_microwire(hw, offset, words, data);
+	} else {
+		status = e1000_write_eeprom_spi(hw, offset, words, data);
+		msleep(10);
+	}
+
+	/* Done with writing */
+	e1000_release_eeprom(hw);
+
+	return status;
 }
 
-/******************************************************************************
- * Writes a 16 bit word to a given offset in an SPI EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset within the EEPROM to be written to
- * words - number of words to write
- * data - pointer to array of 8 bit words to be written to the EEPROM
- *
- *****************************************************************************/
+/**
+ * e1000_write_eeprom_spi - Writes a 16 bit word to a given offset in an SPI EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
 static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
 				  u16 *data)
 {
-    struct e1000_eeprom_info *eeprom = &hw->eeprom;
-    u16 widx = 0;
+	struct e1000_eeprom_info *eeprom = &hw->eeprom;
+	u16 widx = 0;
 
-    DEBUGFUNC("e1000_write_eeprom_spi");
+	DEBUGFUNC("e1000_write_eeprom_spi");
 
-    while (widx < words) {
-        u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
+	while (widx < words) {
+		u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
 
-        if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM;
+		if (e1000_spi_eeprom_ready(hw))
+			return -E1000_ERR_EEPROM;
 
-        e1000_standby_eeprom(hw);
+		e1000_standby_eeprom(hw);
 
-        /*  Send the WRITE ENABLE command (8 bit opcode )  */
-        e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
-                                    eeprom->opcode_bits);
+		/*  Send the WRITE ENABLE command (8 bit opcode )  */
+		e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
+					eeprom->opcode_bits);
 
-        e1000_standby_eeprom(hw);
+		e1000_standby_eeprom(hw);
 
-        /* Some SPI eeproms use the 8th address bit embedded in the opcode */
-        if ((eeprom->address_bits == 8) && (offset >= 128))
-            write_opcode |= EEPROM_A8_OPCODE_SPI;
+		/* Some SPI eeproms use the 8th address bit embedded in the opcode */
+		if ((eeprom->address_bits == 8) && (offset >= 128))
+			write_opcode |= EEPROM_A8_OPCODE_SPI;
 
-        /* Send the Write command (8-bit opcode + addr) */
-        e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
+		/* Send the Write command (8-bit opcode + addr) */
+		e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
 
-        e1000_shift_out_ee_bits(hw, (u16)((offset + widx)*2),
-                                eeprom->address_bits);
+		e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2),
+					eeprom->address_bits);
 
-        /* Send the data */
+		/* Send the data */
 
-        /* Loop to allow for up to whole page write (32 bytes) of eeprom */
-        while (widx < words) {
-            u16 word_out = data[widx];
-            word_out = (word_out >> 8) | (word_out << 8);
-            e1000_shift_out_ee_bits(hw, word_out, 16);
-            widx++;
+		/* Loop to allow for up to whole page write (32 bytes) of eeprom */
+		while (widx < words) {
+			u16 word_out = data[widx];
+			word_out = (word_out >> 8) | (word_out << 8);
+			e1000_shift_out_ee_bits(hw, word_out, 16);
+			widx++;
 
-            /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
-             * operation, while the smaller eeproms are capable of an 8-byte
-             * PAGE WRITE operation.  Break the inner loop to pass new address
-             */
-            if ((((offset + widx)*2) % eeprom->page_size) == 0) {
-                e1000_standby_eeprom(hw);
-                break;
-            }
-        }
-    }
+			/* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
+			 * operation, while the smaller eeproms are capable of an 8-byte
+			 * PAGE WRITE operation.  Break the inner loop to pass new address
+			 */
+			if ((((offset + widx) * 2) % eeprom->page_size) == 0) {
+				e1000_standby_eeprom(hw);
+				break;
+			}
+		}
+	}
 
-    return E1000_SUCCESS;
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Writes a 16 bit word to a given offset in a Microwire EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset within the EEPROM to be written to
- * words - number of words to write
- * data - pointer to array of 16 bit words to be written to the EEPROM
- *
- *****************************************************************************/
+/**
+ * e1000_write_eeprom_microwire - Writes a 16 bit word to a given offset in a Microwire EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
 static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
 					u16 words, u16 *data)
 {
-    struct e1000_eeprom_info *eeprom = &hw->eeprom;
-    u32 eecd;
-    u16 words_written = 0;
-    u16 i = 0;
-
-    DEBUGFUNC("e1000_write_eeprom_microwire");
-
-    /* Send the write enable command to the EEPROM (3-bit opcode plus
-     * 6/8-bit dummy address beginning with 11).  It's less work to include
-     * the 11 of the dummy address as part of the opcode than it is to shift
-     * it over the correct number of bits for the address.  This puts the
-     * EEPROM into write/erase mode.
-     */
-    e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
-                            (u16)(eeprom->opcode_bits + 2));
-
-    e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
-
-    /* Prepare the EEPROM */
-    e1000_standby_eeprom(hw);
-
-    while (words_written < words) {
-        /* Send the Write command (3-bit opcode + addr) */
-        e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
-                                eeprom->opcode_bits);
-
-        e1000_shift_out_ee_bits(hw, (u16)(offset + words_written),
-                                eeprom->address_bits);
-
-        /* Send the data */
-        e1000_shift_out_ee_bits(hw, data[words_written], 16);
-
-        /* Toggle the CS line.  This in effect tells the EEPROM to execute
-         * the previous command.
-         */
-        e1000_standby_eeprom(hw);
-
-        /* Read DO repeatedly until it is high (equal to '1').  The EEPROM will
-         * signal that the command has been completed by raising the DO signal.
-         * If DO does not go high in 10 milliseconds, then error out.
-         */
-        for (i = 0; i < 200; i++) {
-            eecd = er32(EECD);
-            if (eecd & E1000_EECD_DO) break;
-            udelay(50);
-        }
-        if (i == 200) {
-            DEBUGOUT("EEPROM Write did not complete\n");
-            return -E1000_ERR_EEPROM;
-        }
-
-        /* Recover from write */
-        e1000_standby_eeprom(hw);
-
-        words_written++;
-    }
-
-    /* Send the write disable command to the EEPROM (3-bit opcode plus
-     * 6/8-bit dummy address beginning with 10).  It's less work to include
-     * the 10 of the dummy address as part of the opcode than it is to shift
-     * it over the correct number of bits for the address.  This takes the
-     * EEPROM out of write/erase mode.
-     */
-    e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
-                            (u16)(eeprom->opcode_bits + 2));
-
-    e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
-
-    return E1000_SUCCESS;
-}
+	struct e1000_eeprom_info *eeprom = &hw->eeprom;
+	u32 eecd;
+	u16 words_written = 0;
+	u16 i = 0;
 
-/******************************************************************************
- * Flushes the cached eeprom to NVM. This is done by saving the modified values
- * in the eeprom cache and the non modified values in the currently active bank
- * to the new bank.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of  word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-static s32 e1000_commit_shadow_ram(struct e1000_hw *hw)
-{
-    u32 attempts = 100000;
-    u32 eecd = 0;
-    u32 flop = 0;
-    u32 i = 0;
-    s32 error = E1000_SUCCESS;
-    u32 old_bank_offset = 0;
-    u32 new_bank_offset = 0;
-    u8 low_byte = 0;
-    u8 high_byte = 0;
-    bool sector_write_failed = false;
-
-    if (hw->mac_type == e1000_82573) {
-        /* The flop register will be used to determine if flash type is STM */
-        flop = er32(FLOP);
-        for (i=0; i < attempts; i++) {
-            eecd = er32(EECD);
-            if ((eecd & E1000_EECD_FLUPD) == 0) {
-                break;
-            }
-            udelay(5);
-        }
-
-        if (i == attempts) {
-            return -E1000_ERR_EEPROM;
-        }
-
-        /* If STM opcode located in bits 15:8 of flop, reset firmware */
-        if ((flop & 0xFF00) == E1000_STM_OPCODE) {
-            ew32(HICR, E1000_HICR_FW_RESET);
-        }
-
-        /* Perform the flash update */
-        ew32(EECD, eecd | E1000_EECD_FLUPD);
-
-        for (i=0; i < attempts; i++) {
-            eecd = er32(EECD);
-            if ((eecd & E1000_EECD_FLUPD) == 0) {
-                break;
-            }
-            udelay(5);
-        }
-
-        if (i == attempts) {
-            return -E1000_ERR_EEPROM;
-        }
-    }
-
-    if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) {
-        /* We're writing to the opposite bank so if we're on bank 1,
-         * write to bank 0 etc.  We also need to erase the segment that
-         * is going to be written */
-        if (!(er32(EECD) & E1000_EECD_SEC1VAL)) {
-            new_bank_offset = hw->flash_bank_size * 2;
-            old_bank_offset = 0;
-            e1000_erase_ich8_4k_segment(hw, 1);
-        } else {
-            old_bank_offset = hw->flash_bank_size * 2;
-            new_bank_offset = 0;
-            e1000_erase_ich8_4k_segment(hw, 0);
-        }
-
-        sector_write_failed = false;
-        /* Loop for every byte in the shadow RAM,
-         * which is in units of words. */
-        for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
-            /* Determine whether to write the value stored
-             * in the other NVM bank or a modified value stored
-             * in the shadow RAM */
-            if (hw->eeprom_shadow_ram[i].modified) {
-                low_byte = (u8)hw->eeprom_shadow_ram[i].eeprom_word;
-                udelay(100);
-                error = e1000_verify_write_ich8_byte(hw,
-                            (i << 1) + new_bank_offset, low_byte);
-
-                if (error != E1000_SUCCESS)
-                    sector_write_failed = true;
-                else {
-                    high_byte =
-                        (u8)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
-                    udelay(100);
-                }
-            } else {
-                e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
-                                     &low_byte);
-                udelay(100);
-                error = e1000_verify_write_ich8_byte(hw,
-                            (i << 1) + new_bank_offset, low_byte);
-
-                if (error != E1000_SUCCESS)
-                    sector_write_failed = true;
-                else {
-                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
-                                         &high_byte);
-                    udelay(100);
-                }
-            }
-
-            /* If the write of the low byte was successful, go ahead and
-             * write the high byte while checking to make sure that if it
-             * is the signature byte, then it is handled properly */
-            if (!sector_write_failed) {
-                /* If the word is 0x13, then make sure the signature bits
-                 * (15:14) are 11b until the commit has completed.
-                 * This will allow us to write 10b which indicates the
-                 * signature is valid.  We want to do this after the write
-                 * has completed so that we don't mark the segment valid
-                 * while the write is still in progress */
-                if (i == E1000_ICH_NVM_SIG_WORD)
-                    high_byte = E1000_ICH_NVM_SIG_MASK | high_byte;
-
-                error = e1000_verify_write_ich8_byte(hw,
-                            (i << 1) + new_bank_offset + 1, high_byte);
-                if (error != E1000_SUCCESS)
-                    sector_write_failed = true;
-
-            } else {
-                /* If the write failed then break from the loop and
-                 * return an error */
-                break;
-            }
-        }
-
-        /* Don't bother writing the segment valid bits if sector
-         * programming failed. */
-        if (!sector_write_failed) {
-            /* Finally validate the new segment by setting bit 15:14
-             * to 10b in word 0x13 , this can be done without an
-             * erase as well since these bits are 11 to start with
-             * and we need to change bit 14 to 0b */
-            e1000_read_ich8_byte(hw,
-                                 E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
-                                 &high_byte);
-            high_byte &= 0xBF;
-            error = e1000_verify_write_ich8_byte(hw,
-                        E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte);
-            /* And invalidate the previously valid segment by setting
-             * its signature word (0x13) high_byte to 0b. This can be
-             * done without an erase because flash erase sets all bits
-             * to 1's. We can write 1's to 0's without an erase */
-            if (error == E1000_SUCCESS) {
-                error = e1000_verify_write_ich8_byte(hw,
-                            E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0);
-            }
-
-            /* Clear the now not used entry in the cache */
-            for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
-                hw->eeprom_shadow_ram[i].modified = false;
-                hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
-            }
-        }
-    }
-
-    return error;
+	DEBUGFUNC("e1000_write_eeprom_microwire");
+
+	/* Send the write enable command to the EEPROM (3-bit opcode plus
+	 * 6/8-bit dummy address beginning with 11).  It's less work to include
+	 * the 11 of the dummy address as part of the opcode than it is to shift
+	 * it over the correct number of bits for the address.  This puts the
+	 * EEPROM into write/erase mode.
+	 */
+	e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
+				(u16) (eeprom->opcode_bits + 2));
+
+	e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+	/* Prepare the EEPROM */
+	e1000_standby_eeprom(hw);
+
+	while (words_written < words) {
+		/* Send the Write command (3-bit opcode + addr) */
+		e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
+					eeprom->opcode_bits);
+
+		e1000_shift_out_ee_bits(hw, (u16) (offset + words_written),
+					eeprom->address_bits);
+
+		/* Send the data */
+		e1000_shift_out_ee_bits(hw, data[words_written], 16);
+
+		/* Toggle the CS line.  This in effect tells the EEPROM to execute
+		 * the previous command.
+		 */
+		e1000_standby_eeprom(hw);
+
+		/* Read DO repeatedly until it is high (equal to '1').  The EEPROM will
+		 * signal that the command has been completed by raising the DO signal.
+		 * If DO does not go high in 10 milliseconds, then error out.
+		 */
+		for (i = 0; i < 200; i++) {
+			eecd = er32(EECD);
+			if (eecd & E1000_EECD_DO)
+				break;
+			udelay(50);
+		}
+		if (i == 200) {
+			DEBUGOUT("EEPROM Write did not complete\n");
+			return -E1000_ERR_EEPROM;
+		}
+
+		/* Recover from write */
+		e1000_standby_eeprom(hw);
+
+		words_written++;
+	}
+
+	/* Send the write disable command to the EEPROM (3-bit opcode plus
+	 * 6/8-bit dummy address beginning with 10).  It's less work to include
+	 * the 10 of the dummy address as part of the opcode than it is to shift
+	 * it over the correct number of bits for the address.  This takes the
+	 * EEPROM out of write/erase mode.
+	 */
+	e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
+				(u16) (eeprom->opcode_bits + 2));
+
+	e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
+/**
+ * e1000_read_mac_addr - read the adapters MAC from eeprom
+ * @hw: Struct containing variables accessed by shared code
+ *
  * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
  * second function of dual function devices
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+ */
 s32 e1000_read_mac_addr(struct e1000_hw *hw)
 {
-    u16 offset;
-    u16 eeprom_data, i;
-
-    DEBUGFUNC("e1000_read_mac_addr");
-
-    for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
-        offset = i >> 1;
-        if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
-            DEBUGOUT("EEPROM Read Error\n");
-            return -E1000_ERR_EEPROM;
-        }
-        hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF);
-        hw->perm_mac_addr[i+1] = (u8)(eeprom_data >> 8);
-    }
-
-    switch (hw->mac_type) {
-    default:
-        break;
-    case e1000_82546:
-    case e1000_82546_rev_3:
-    case e1000_82571:
-    case e1000_80003es2lan:
-        if (er32(STATUS) & E1000_STATUS_FUNC_1)
-            hw->perm_mac_addr[5] ^= 0x01;
-        break;
-    }
-
-    for (i = 0; i < NODE_ADDRESS_SIZE; i++)
-        hw->mac_addr[i] = hw->perm_mac_addr[i];
-    return E1000_SUCCESS;
+	u16 offset;
+	u16 eeprom_data, i;
+
+	DEBUGFUNC("e1000_read_mac_addr");
+
+	for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
+		offset = i >> 1;
+		if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
+			DEBUGOUT("EEPROM Read Error\n");
+			return -E1000_ERR_EEPROM;
+		}
+		hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
+		hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8);
+	}
+
+	switch (hw->mac_type) {
+	default:
+		break;
+	case e1000_82546:
+	case e1000_82546_rev_3:
+		if (er32(STATUS) & E1000_STATUS_FUNC_1)
+			hw->perm_mac_addr[5] ^= 0x01;
+		break;
+	}
+
+	for (i = 0; i < NODE_ADDRESS_SIZE; i++)
+		hw->mac_addr[i] = hw->perm_mac_addr[i];
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Initializes receive address filters.
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_init_rx_addrs - Initializes receive address filters.
+ * @hw: Struct containing variables accessed by shared code
  *
  * Places the MAC address in receive address register 0 and clears the rest
- * of the receive addresss registers. Clears the multicast table. Assumes
+ * of the receive address registers. Clears the multicast table. Assumes
  * the receiver is in reset when the routine is called.
- *****************************************************************************/
+ */
 static void e1000_init_rx_addrs(struct e1000_hw *hw)
 {
-    u32 i;
-    u32 rar_num;
-
-    DEBUGFUNC("e1000_init_rx_addrs");
-
-    /* Setup the receive address. */
-    DEBUGOUT("Programming MAC Address into RAR[0]\n");
-
-    e1000_rar_set(hw, hw->mac_addr, 0);
-
-    rar_num = E1000_RAR_ENTRIES;
-
-    /* Reserve a spot for the Locally Administered Address to work around
-     * an 82571 issue in which a reset on one port will reload the MAC on
-     * the other port. */
-    if ((hw->mac_type == e1000_82571) && (hw->laa_is_present))
-        rar_num -= 1;
-    if (hw->mac_type == e1000_ich8lan)
-        rar_num = E1000_RAR_ENTRIES_ICH8LAN;
-
-    /* Zero out the other 15 receive addresses. */
-    DEBUGOUT("Clearing RAR[1-15]\n");
-    for (i = 1; i < rar_num; i++) {
-        E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
-        E1000_WRITE_FLUSH();
-        E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
-        E1000_WRITE_FLUSH();
-    }
+	u32 i;
+	u32 rar_num;
+
+	DEBUGFUNC("e1000_init_rx_addrs");
+
+	/* Setup the receive address. */
+	DEBUGOUT("Programming MAC Address into RAR[0]\n");
+
+	e1000_rar_set(hw, hw->mac_addr, 0);
+
+	rar_num = E1000_RAR_ENTRIES;
+
+	/* Zero out the other 15 receive addresses. */
+	DEBUGOUT("Clearing RAR[1-15]\n");
+	for (i = 1; i < rar_num; i++) {
+		E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+		E1000_WRITE_FLUSH();
+		E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+		E1000_WRITE_FLUSH();
+	}
 }
 
-/******************************************************************************
- * Hashes an address to determine its location in the multicast table
- *
- * hw - Struct containing variables accessed by shared code
- * mc_addr - the multicast address to hash
- *****************************************************************************/
+/**
+ * e1000_hash_mc_addr - Hashes an address to determine its location in the multicast table
+ * @hw: Struct containing variables accessed by shared code
+ * @mc_addr: the multicast address to hash
+ */
 u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
 {
-    u32 hash_value = 0;
-
-    /* The portion of the address that is used for the hash table is
-     * determined by the mc_filter_type setting.
-     */
-    switch (hw->mc_filter_type) {
-    /* [0] [1] [2] [3] [4] [5]
-     * 01  AA  00  12  34  56
-     * LSB                 MSB
-     */
-    case 0:
-        if (hw->mac_type == e1000_ich8lan) {
-            /* [47:38] i.e. 0x158 for above example address */
-            hash_value = ((mc_addr[4] >> 6) | (((u16)mc_addr[5]) << 2));
-        } else {
-            /* [47:36] i.e. 0x563 for above example address */
-            hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
-        }
-        break;
-    case 1:
-        if (hw->mac_type == e1000_ich8lan) {
-            /* [46:37] i.e. 0x2B1 for above example address */
-            hash_value = ((mc_addr[4] >> 5) | (((u16)mc_addr[5]) << 3));
-        } else {
-            /* [46:35] i.e. 0xAC6 for above example address */
-            hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
-        }
-        break;
-    case 2:
-        if (hw->mac_type == e1000_ich8lan) {
-            /*[45:36] i.e. 0x163 for above example address */
-            hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
-        } else {
-            /* [45:34] i.e. 0x5D8 for above example address */
-            hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
-        }
-        break;
-    case 3:
-        if (hw->mac_type == e1000_ich8lan) {
-            /* [43:34] i.e. 0x18D for above example address */
-            hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
-        } else {
-            /* [43:32] i.e. 0x634 for above example address */
-            hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
-        }
-        break;
-    }
-
-    hash_value &= 0xFFF;
-    if (hw->mac_type == e1000_ich8lan)
-        hash_value &= 0x3FF;
-
-    return hash_value;
+	u32 hash_value = 0;
+
+	/* The portion of the address that is used for the hash table is
+	 * determined by the mc_filter_type setting.
+	 */
+	switch (hw->mc_filter_type) {
+		/* [0] [1] [2] [3] [4] [5]
+		 * 01  AA  00  12  34  56
+		 * LSB                 MSB
+		 */
+	case 0:
+		/* [47:36] i.e. 0x563 for above example address */
+		hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+		break;
+	case 1:
+		/* [46:35] i.e. 0xAC6 for above example address */
+		hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+		break;
+	case 2:
+		/* [45:34] i.e. 0x5D8 for above example address */
+		hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+		break;
+	case 3:
+		/* [43:32] i.e. 0x634 for above example address */
+		hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+		break;
+	}
+
+	hash_value &= 0xFFF;
+	return hash_value;
 }
 
-/******************************************************************************
- * Puts an ethernet address into a receive address register.
- *
- * hw - Struct containing variables accessed by shared code
- * addr - Address to put into receive address register
- * index - Receive address register to write
- *****************************************************************************/
+/**
+ * e1000_rar_set - Puts an ethernet address into a receive address register.
+ * @hw: Struct containing variables accessed by shared code
+ * @addr: Address to put into receive address register
+ * @index: Receive address register to write
+ */
 void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
 {
-    u32 rar_low, rar_high;
-
-    /* HW expects these in little endian so we reverse the byte order
-     * from network order (big endian) to little endian
-     */
-    rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
-               ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
-    rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
-
-    /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
-     * unit hang.
-     *
-     * Description:
-     * If there are any Rx frames queued up or otherwise present in the HW
-     * before RSS is enabled, and then we enable RSS, the HW Rx unit will
-     * hang.  To work around this issue, we have to disable receives and
-     * flush out all Rx frames before we enable RSS. To do so, we modify we
-     * redirect all Rx traffic to manageability and then reset the HW.
-     * This flushes away Rx frames, and (since the redirections to
-     * manageability persists across resets) keeps new ones from coming in
-     * while we work.  Then, we clear the Address Valid AV bit for all MAC
-     * addresses and undo the re-direction to manageability.
-     * Now, frames are coming in again, but the MAC won't accept them, so
-     * far so good.  We now proceed to initialize RSS (if necessary) and
-     * configure the Rx unit.  Last, we re-enable the AV bits and continue
-     * on our merry way.
-     */
-    switch (hw->mac_type) {
-    case e1000_82571:
-    case e1000_82572:
-    case e1000_80003es2lan:
-        if (hw->leave_av_bit_off)
-            break;
-    default:
-        /* Indicate to hardware the Address is Valid. */
-        rar_high |= E1000_RAH_AV;
-        break;
-    }
-
-    E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
-    E1000_WRITE_FLUSH();
-    E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
-    E1000_WRITE_FLUSH();
+	u32 rar_low, rar_high;
+
+	/* HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+		   ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+	rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+	/* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
+	 * unit hang.
+	 *
+	 * Description:
+	 * If there are any Rx frames queued up or otherwise present in the HW
+	 * before RSS is enabled, and then we enable RSS, the HW Rx unit will
+	 * hang.  To work around this issue, we have to disable receives and
+	 * flush out all Rx frames before we enable RSS. To do so, we modify we
+	 * redirect all Rx traffic to manageability and then reset the HW.
+	 * This flushes away Rx frames, and (since the redirections to
+	 * manageability persists across resets) keeps new ones from coming in
+	 * while we work.  Then, we clear the Address Valid AV bit for all MAC
+	 * addresses and undo the re-direction to manageability.
+	 * Now, frames are coming in again, but the MAC won't accept them, so
+	 * far so good.  We now proceed to initialize RSS (if necessary) and
+	 * configure the Rx unit.  Last, we re-enable the AV bits and continue
+	 * on our merry way.
+	 */
+	switch (hw->mac_type) {
+	default:
+		/* Indicate to hardware the Address is Valid. */
+		rar_high |= E1000_RAH_AV;
+		break;
+	}
+
+	E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+	E1000_WRITE_FLUSH();
+	E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+	E1000_WRITE_FLUSH();
 }
 
-/******************************************************************************
- * Writes a value to the specified offset in the VLAN filter table.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - Offset in VLAN filer table to write
- * value - Value to write into VLAN filter table
- *****************************************************************************/
+/**
+ * e1000_write_vfta - Writes a value to the specified offset in the VLAN filter table.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: Offset in VLAN filer table to write
+ * @value: Value to write into VLAN filter table
+ */
 void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
 {
-    u32 temp;
-
-    if (hw->mac_type == e1000_ich8lan)
-        return;
-
-    if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
-        temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
-        E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
-        E1000_WRITE_FLUSH();
-        E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
-        E1000_WRITE_FLUSH();
-    } else {
-        E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
-        E1000_WRITE_FLUSH();
-    }
+	u32 temp;
+
+	if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+		temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
+		E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+		E1000_WRITE_FLUSH();
+		E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+		E1000_WRITE_FLUSH();
+	} else {
+		E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+		E1000_WRITE_FLUSH();
+	}
 }
 
-/******************************************************************************
- * Clears the VLAN filer table
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_clear_vfta - Clears the VLAN filer table
+ * @hw: Struct containing variables accessed by shared code
+ */
 static void e1000_clear_vfta(struct e1000_hw *hw)
 {
-    u32 offset;
-    u32 vfta_value = 0;
-    u32 vfta_offset = 0;
-    u32 vfta_bit_in_reg = 0;
-
-    if (hw->mac_type == e1000_ich8lan)
-        return;
-
-    if (hw->mac_type == e1000_82573) {
-        if (hw->mng_cookie.vlan_id != 0) {
-            /* The VFTA is a 4096b bit-field, each identifying a single VLAN
-             * ID.  The following operations determine which 32b entry
-             * (i.e. offset) into the array we want to set the VLAN ID
-             * (i.e. bit) of the manageability unit. */
-            vfta_offset = (hw->mng_cookie.vlan_id >>
-                           E1000_VFTA_ENTRY_SHIFT) &
-                          E1000_VFTA_ENTRY_MASK;
-            vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
-                                    E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
-        }
-    }
-    for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
-        /* If the offset we want to clear is the same offset of the
-         * manageability VLAN ID, then clear all bits except that of the
-         * manageability unit */
-        vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
-        E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
-        E1000_WRITE_FLUSH();
-    }
+	u32 offset;
+	u32 vfta_value = 0;
+	u32 vfta_offset = 0;
+	u32 vfta_bit_in_reg = 0;
+
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		/* If the offset we want to clear is the same offset of the
+		 * manageability VLAN ID, then clear all bits except that of the
+		 * manageability unit */
+		vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+		E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+		E1000_WRITE_FLUSH();
+	}
 }
 
 static s32 e1000_id_led_init(struct e1000_hw *hw)
 {
-    u32 ledctl;
-    const u32 ledctl_mask = 0x000000FF;
-    const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
-    const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
-    u16 eeprom_data, i, temp;
-    const u16 led_mask = 0x0F;
-
-    DEBUGFUNC("e1000_id_led_init");
-
-    if (hw->mac_type < e1000_82540) {
-        /* Nothing to do */
-        return E1000_SUCCESS;
-    }
-
-    ledctl = er32(LEDCTL);
-    hw->ledctl_default = ledctl;
-    hw->ledctl_mode1 = hw->ledctl_default;
-    hw->ledctl_mode2 = hw->ledctl_default;
-
-    if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
-        DEBUGOUT("EEPROM Read Error\n");
-        return -E1000_ERR_EEPROM;
-    }
-
-    if ((hw->mac_type == e1000_82573) &&
-        (eeprom_data == ID_LED_RESERVED_82573))
-        eeprom_data = ID_LED_DEFAULT_82573;
-    else if ((eeprom_data == ID_LED_RESERVED_0000) ||
-            (eeprom_data == ID_LED_RESERVED_FFFF)) {
-        if (hw->mac_type == e1000_ich8lan)
-            eeprom_data = ID_LED_DEFAULT_ICH8LAN;
-        else
-            eeprom_data = ID_LED_DEFAULT;
-    }
-
-    for (i = 0; i < 4; i++) {
-        temp = (eeprom_data >> (i << 2)) & led_mask;
-        switch (temp) {
-        case ID_LED_ON1_DEF2:
-        case ID_LED_ON1_ON2:
-        case ID_LED_ON1_OFF2:
-            hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
-            hw->ledctl_mode1 |= ledctl_on << (i << 3);
-            break;
-        case ID_LED_OFF1_DEF2:
-        case ID_LED_OFF1_ON2:
-        case ID_LED_OFF1_OFF2:
-            hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
-            hw->ledctl_mode1 |= ledctl_off << (i << 3);
-            break;
-        default:
-            /* Do nothing */
-            break;
-        }
-        switch (temp) {
-        case ID_LED_DEF1_ON2:
-        case ID_LED_ON1_ON2:
-        case ID_LED_OFF1_ON2:
-            hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
-            hw->ledctl_mode2 |= ledctl_on << (i << 3);
-            break;
-        case ID_LED_DEF1_OFF2:
-        case ID_LED_ON1_OFF2:
-        case ID_LED_OFF1_OFF2:
-            hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
-            hw->ledctl_mode2 |= ledctl_off << (i << 3);
-            break;
-        default:
-            /* Do nothing */
-            break;
-        }
-    }
-    return E1000_SUCCESS;
+	u32 ledctl;
+	const u32 ledctl_mask = 0x000000FF;
+	const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+	const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+	u16 eeprom_data, i, temp;
+	const u16 led_mask = 0x0F;
+
+	DEBUGFUNC("e1000_id_led_init");
+
+	if (hw->mac_type < e1000_82540) {
+		/* Nothing to do */
+		return E1000_SUCCESS;
+	}
+
+	ledctl = er32(LEDCTL);
+	hw->ledctl_default = ledctl;
+	hw->ledctl_mode1 = hw->ledctl_default;
+	hw->ledctl_mode2 = hw->ledctl_default;
+
+	if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
+		DEBUGOUT("EEPROM Read Error\n");
+		return -E1000_ERR_EEPROM;
+	}
+
+	if ((eeprom_data == ID_LED_RESERVED_0000) ||
+	    (eeprom_data == ID_LED_RESERVED_FFFF)) {
+		eeprom_data = ID_LED_DEFAULT;
+	}
+
+	for (i = 0; i < 4; i++) {
+		temp = (eeprom_data >> (i << 2)) & led_mask;
+		switch (temp) {
+		case ID_LED_ON1_DEF2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_ON1_OFF2:
+			hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			hw->ledctl_mode1 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_OFF1_DEF2:
+		case ID_LED_OFF1_ON2:
+		case ID_LED_OFF1_OFF2:
+			hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			hw->ledctl_mode1 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+		switch (temp) {
+		case ID_LED_DEF1_ON2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_OFF1_ON2:
+			hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			hw->ledctl_mode2 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_DEF1_OFF2:
+		case ID_LED_ON1_OFF2:
+		case ID_LED_OFF1_OFF2:
+			hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			hw->ledctl_mode2 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+	}
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Prepares SW controlable LED for use and saves the current state of the LED.
+/**
+ * e1000_setup_led
+ * @hw: Struct containing variables accessed by shared code
  *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+ * Prepares SW controlable LED for use and saves the current state of the LED.
+ */
 s32 e1000_setup_led(struct e1000_hw *hw)
 {
-    u32 ledctl;
-    s32 ret_val = E1000_SUCCESS;
-
-    DEBUGFUNC("e1000_setup_led");
-
-    switch (hw->mac_type) {
-    case e1000_82542_rev2_0:
-    case e1000_82542_rev2_1:
-    case e1000_82543:
-    case e1000_82544:
-        /* No setup necessary */
-        break;
-    case e1000_82541:
-    case e1000_82547:
-    case e1000_82541_rev_2:
-    case e1000_82547_rev_2:
-        /* Turn off PHY Smart Power Down (if enabled) */
-        ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
-                                     &hw->phy_spd_default);
-        if (ret_val)
-            return ret_val;
-        ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
-                                      (u16)(hw->phy_spd_default &
-                                      ~IGP01E1000_GMII_SPD));
-        if (ret_val)
-            return ret_val;
-        /* Fall Through */
-    default:
-        if (hw->media_type == e1000_media_type_fiber) {
-            ledctl = er32(LEDCTL);
-            /* Save current LEDCTL settings */
-            hw->ledctl_default = ledctl;
-            /* Turn off LED0 */
-            ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
-                        E1000_LEDCTL_LED0_BLINK |
-                        E1000_LEDCTL_LED0_MODE_MASK);
-            ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
-                       E1000_LEDCTL_LED0_MODE_SHIFT);
-            ew32(LEDCTL, ledctl);
-        } else if (hw->media_type == e1000_media_type_copper)
-            ew32(LEDCTL, hw->ledctl_mode1);
-        break;
-    }
-
-    return E1000_SUCCESS;
-}
+	u32 ledctl;
+	s32 ret_val = E1000_SUCCESS;
 
+	DEBUGFUNC("e1000_setup_led");
 
-/******************************************************************************
- * Used on 82571 and later Si that has LED blink bits.
- * Callers must use their own timer and should have already called
- * e1000_id_led_init()
- * Call e1000_cleanup led() to stop blinking
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-s32 e1000_blink_led_start(struct e1000_hw *hw)
-{
-    s16  i;
-    u32 ledctl_blink = 0;
-
-    DEBUGFUNC("e1000_id_led_blink_on");
-
-    if (hw->mac_type < e1000_82571) {
-        /* Nothing to do */
-        return E1000_SUCCESS;
-    }
-    if (hw->media_type == e1000_media_type_fiber) {
-        /* always blink LED0 for PCI-E fiber */
-        ledctl_blink = E1000_LEDCTL_LED0_BLINK |
-                     (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
-    } else {
-        /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
-        ledctl_blink = hw->ledctl_mode2;
-        for (i=0; i < 4; i++)
-            if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
-                E1000_LEDCTL_MODE_LED_ON)
-                ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
-    }
-
-    ew32(LEDCTL, ledctl_blink);
-
-    return E1000_SUCCESS;
+	switch (hw->mac_type) {
+	case e1000_82542_rev2_0:
+	case e1000_82542_rev2_1:
+	case e1000_82543:
+	case e1000_82544:
+		/* No setup necessary */
+		break;
+	case e1000_82541:
+	case e1000_82547:
+	case e1000_82541_rev_2:
+	case e1000_82547_rev_2:
+		/* Turn off PHY Smart Power Down (if enabled) */
+		ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
+					     &hw->phy_spd_default);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+					      (u16) (hw->phy_spd_default &
+						     ~IGP01E1000_GMII_SPD));
+		if (ret_val)
+			return ret_val;
+		/* Fall Through */
+	default:
+		if (hw->media_type == e1000_media_type_fiber) {
+			ledctl = er32(LEDCTL);
+			/* Save current LEDCTL settings */
+			hw->ledctl_default = ledctl;
+			/* Turn off LED0 */
+			ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+				    E1000_LEDCTL_LED0_BLINK |
+				    E1000_LEDCTL_LED0_MODE_MASK);
+			ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+				   E1000_LEDCTL_LED0_MODE_SHIFT);
+			ew32(LEDCTL, ledctl);
+		} else if (hw->media_type == e1000_media_type_copper)
+			ew32(LEDCTL, hw->ledctl_mode1);
+		break;
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Restores the saved state of the SW controlable LED.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_cleanup_led - Restores the saved state of the SW controlable LED.
+ * @hw: Struct containing variables accessed by shared code
+ */
 s32 e1000_cleanup_led(struct e1000_hw *hw)
 {
-    s32 ret_val = E1000_SUCCESS;
-
-    DEBUGFUNC("e1000_cleanup_led");
-
-    switch (hw->mac_type) {
-    case e1000_82542_rev2_0:
-    case e1000_82542_rev2_1:
-    case e1000_82543:
-    case e1000_82544:
-        /* No cleanup necessary */
-        break;
-    case e1000_82541:
-    case e1000_82547:
-    case e1000_82541_rev_2:
-    case e1000_82547_rev_2:
-        /* Turn on PHY Smart Power Down (if previously enabled) */
-        ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
-                                      hw->phy_spd_default);
-        if (ret_val)
-            return ret_val;
-        /* Fall Through */
-    default:
-        if (hw->phy_type == e1000_phy_ife) {
-            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
-            break;
-        }
-        /* Restore LEDCTL settings */
-        ew32(LEDCTL, hw->ledctl_default);
-        break;
-    }
-
-    return E1000_SUCCESS;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_cleanup_led");
+
+	switch (hw->mac_type) {
+	case e1000_82542_rev2_0:
+	case e1000_82542_rev2_1:
+	case e1000_82543:
+	case e1000_82544:
+		/* No cleanup necessary */
+		break;
+	case e1000_82541:
+	case e1000_82547:
+	case e1000_82541_rev_2:
+	case e1000_82547_rev_2:
+		/* Turn on PHY Smart Power Down (if previously enabled) */
+		ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+					      hw->phy_spd_default);
+		if (ret_val)
+			return ret_val;
+		/* Fall Through */
+	default:
+		/* Restore LEDCTL settings */
+		ew32(LEDCTL, hw->ledctl_default);
+		break;
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Turns on the software controllable LED
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_led_on - Turns on the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
 s32 e1000_led_on(struct e1000_hw *hw)
 {
-    u32 ctrl = er32(CTRL);
-
-    DEBUGFUNC("e1000_led_on");
-
-    switch (hw->mac_type) {
-    case e1000_82542_rev2_0:
-    case e1000_82542_rev2_1:
-    case e1000_82543:
-        /* Set SW Defineable Pin 0 to turn on the LED */
-        ctrl |= E1000_CTRL_SWDPIN0;
-        ctrl |= E1000_CTRL_SWDPIO0;
-        break;
-    case e1000_82544:
-        if (hw->media_type == e1000_media_type_fiber) {
-            /* Set SW Defineable Pin 0 to turn on the LED */
-            ctrl |= E1000_CTRL_SWDPIN0;
-            ctrl |= E1000_CTRL_SWDPIO0;
-        } else {
-            /* Clear SW Defineable Pin 0 to turn on the LED */
-            ctrl &= ~E1000_CTRL_SWDPIN0;
-            ctrl |= E1000_CTRL_SWDPIO0;
-        }
-        break;
-    default:
-        if (hw->media_type == e1000_media_type_fiber) {
-            /* Clear SW Defineable Pin 0 to turn on the LED */
-            ctrl &= ~E1000_CTRL_SWDPIN0;
-            ctrl |= E1000_CTRL_SWDPIO0;
-        } else if (hw->phy_type == e1000_phy_ife) {
-            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
-                 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
-        } else if (hw->media_type == e1000_media_type_copper) {
-            ew32(LEDCTL, hw->ledctl_mode2);
-            return E1000_SUCCESS;
-        }
-        break;
-    }
-
-    ew32(CTRL, ctrl);
-
-    return E1000_SUCCESS;
+	u32 ctrl = er32(CTRL);
+
+	DEBUGFUNC("e1000_led_on");
+
+	switch (hw->mac_type) {
+	case e1000_82542_rev2_0:
+	case e1000_82542_rev2_1:
+	case e1000_82543:
+		/* Set SW Defineable Pin 0 to turn on the LED */
+		ctrl |= E1000_CTRL_SWDPIN0;
+		ctrl |= E1000_CTRL_SWDPIO0;
+		break;
+	case e1000_82544:
+		if (hw->media_type == e1000_media_type_fiber) {
+			/* Set SW Defineable Pin 0 to turn on the LED */
+			ctrl |= E1000_CTRL_SWDPIN0;
+			ctrl |= E1000_CTRL_SWDPIO0;
+		} else {
+			/* Clear SW Defineable Pin 0 to turn on the LED */
+			ctrl &= ~E1000_CTRL_SWDPIN0;
+			ctrl |= E1000_CTRL_SWDPIO0;
+		}
+		break;
+	default:
+		if (hw->media_type == e1000_media_type_fiber) {
+			/* Clear SW Defineable Pin 0 to turn on the LED */
+			ctrl &= ~E1000_CTRL_SWDPIN0;
+			ctrl |= E1000_CTRL_SWDPIO0;
+		} else if (hw->media_type == e1000_media_type_copper) {
+			ew32(LEDCTL, hw->ledctl_mode2);
+			return E1000_SUCCESS;
+		}
+		break;
+	}
+
+	ew32(CTRL, ctrl);
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Turns off the software controllable LED
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_led_off - Turns off the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
 s32 e1000_led_off(struct e1000_hw *hw)
 {
-    u32 ctrl = er32(CTRL);
-
-    DEBUGFUNC("e1000_led_off");
-
-    switch (hw->mac_type) {
-    case e1000_82542_rev2_0:
-    case e1000_82542_rev2_1:
-    case e1000_82543:
-        /* Clear SW Defineable Pin 0 to turn off the LED */
-        ctrl &= ~E1000_CTRL_SWDPIN0;
-        ctrl |= E1000_CTRL_SWDPIO0;
-        break;
-    case e1000_82544:
-        if (hw->media_type == e1000_media_type_fiber) {
-            /* Clear SW Defineable Pin 0 to turn off the LED */
-            ctrl &= ~E1000_CTRL_SWDPIN0;
-            ctrl |= E1000_CTRL_SWDPIO0;
-        } else {
-            /* Set SW Defineable Pin 0 to turn off the LED */
-            ctrl |= E1000_CTRL_SWDPIN0;
-            ctrl |= E1000_CTRL_SWDPIO0;
-        }
-        break;
-    default:
-        if (hw->media_type == e1000_media_type_fiber) {
-            /* Set SW Defineable Pin 0 to turn off the LED */
-            ctrl |= E1000_CTRL_SWDPIN0;
-            ctrl |= E1000_CTRL_SWDPIO0;
-        } else if (hw->phy_type == e1000_phy_ife) {
-            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
-                 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
-        } else if (hw->media_type == e1000_media_type_copper) {
-            ew32(LEDCTL, hw->ledctl_mode1);
-            return E1000_SUCCESS;
-        }
-        break;
-    }
-
-    ew32(CTRL, ctrl);
-
-    return E1000_SUCCESS;
+	u32 ctrl = er32(CTRL);
+
+	DEBUGFUNC("e1000_led_off");
+
+	switch (hw->mac_type) {
+	case e1000_82542_rev2_0:
+	case e1000_82542_rev2_1:
+	case e1000_82543:
+		/* Clear SW Defineable Pin 0 to turn off the LED */
+		ctrl &= ~E1000_CTRL_SWDPIN0;
+		ctrl |= E1000_CTRL_SWDPIO0;
+		break;
+	case e1000_82544:
+		if (hw->media_type == e1000_media_type_fiber) {
+			/* Clear SW Defineable Pin 0 to turn off the LED */
+			ctrl &= ~E1000_CTRL_SWDPIN0;
+			ctrl |= E1000_CTRL_SWDPIO0;
+		} else {
+			/* Set SW Defineable Pin 0 to turn off the LED */
+			ctrl |= E1000_CTRL_SWDPIN0;
+			ctrl |= E1000_CTRL_SWDPIO0;
+		}
+		break;
+	default:
+		if (hw->media_type == e1000_media_type_fiber) {
+			/* Set SW Defineable Pin 0 to turn off the LED */
+			ctrl |= E1000_CTRL_SWDPIN0;
+			ctrl |= E1000_CTRL_SWDPIO0;
+		} else if (hw->media_type == e1000_media_type_copper) {
+			ew32(LEDCTL, hw->ledctl_mode1);
+			return E1000_SUCCESS;
+		}
+		break;
+	}
+
+	ew32(CTRL, ctrl);
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Clears all hardware statistics counters.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_clear_hw_cntrs - Clears all hardware statistics counters.
+ * @hw: Struct containing variables accessed by shared code
+ */
 static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
 {
-    volatile u32 temp;
-
-    temp = er32(CRCERRS);
-    temp = er32(SYMERRS);
-    temp = er32(MPC);
-    temp = er32(SCC);
-    temp = er32(ECOL);
-    temp = er32(MCC);
-    temp = er32(LATECOL);
-    temp = er32(COLC);
-    temp = er32(DC);
-    temp = er32(SEC);
-    temp = er32(RLEC);
-    temp = er32(XONRXC);
-    temp = er32(XONTXC);
-    temp = er32(XOFFRXC);
-    temp = er32(XOFFTXC);
-    temp = er32(FCRUC);
-
-    if (hw->mac_type != e1000_ich8lan) {
-    temp = er32(PRC64);
-    temp = er32(PRC127);
-    temp = er32(PRC255);
-    temp = er32(PRC511);
-    temp = er32(PRC1023);
-    temp = er32(PRC1522);
-    }
-
-    temp = er32(GPRC);
-    temp = er32(BPRC);
-    temp = er32(MPRC);
-    temp = er32(GPTC);
-    temp = er32(GORCL);
-    temp = er32(GORCH);
-    temp = er32(GOTCL);
-    temp = er32(GOTCH);
-    temp = er32(RNBC);
-    temp = er32(RUC);
-    temp = er32(RFC);
-    temp = er32(ROC);
-    temp = er32(RJC);
-    temp = er32(TORL);
-    temp = er32(TORH);
-    temp = er32(TOTL);
-    temp = er32(TOTH);
-    temp = er32(TPR);
-    temp = er32(TPT);
-
-    if (hw->mac_type != e1000_ich8lan) {
-    temp = er32(PTC64);
-    temp = er32(PTC127);
-    temp = er32(PTC255);
-    temp = er32(PTC511);
-    temp = er32(PTC1023);
-    temp = er32(PTC1522);
-    }
-
-    temp = er32(MPTC);
-    temp = er32(BPTC);
-
-    if (hw->mac_type < e1000_82543) return;
-
-    temp = er32(ALGNERRC);
-    temp = er32(RXERRC);
-    temp = er32(TNCRS);
-    temp = er32(CEXTERR);
-    temp = er32(TSCTC);
-    temp = er32(TSCTFC);
-
-    if (hw->mac_type <= e1000_82544) return;
-
-    temp = er32(MGTPRC);
-    temp = er32(MGTPDC);
-    temp = er32(MGTPTC);
-
-    if (hw->mac_type <= e1000_82547_rev_2) return;
-
-    temp = er32(IAC);
-    temp = er32(ICRXOC);
-
-    if (hw->mac_type == e1000_ich8lan) return;
-
-    temp = er32(ICRXPTC);
-    temp = er32(ICRXATC);
-    temp = er32(ICTXPTC);
-    temp = er32(ICTXATC);
-    temp = er32(ICTXQEC);
-    temp = er32(ICTXQMTC);
-    temp = er32(ICRXDMTC);
-}
-
-/******************************************************************************
- * Resets Adaptive IFS to its default state.
- *
- * hw - Struct containing variables accessed by shared code
+	volatile u32 temp;
+
+	temp = er32(CRCERRS);
+	temp = er32(SYMERRS);
+	temp = er32(MPC);
+	temp = er32(SCC);
+	temp = er32(ECOL);
+	temp = er32(MCC);
+	temp = er32(LATECOL);
+	temp = er32(COLC);
+	temp = er32(DC);
+	temp = er32(SEC);
+	temp = er32(RLEC);
+	temp = er32(XONRXC);
+	temp = er32(XONTXC);
+	temp = er32(XOFFRXC);
+	temp = er32(XOFFTXC);
+	temp = er32(FCRUC);
+
+	temp = er32(PRC64);
+	temp = er32(PRC127);
+	temp = er32(PRC255);
+	temp = er32(PRC511);
+	temp = er32(PRC1023);
+	temp = er32(PRC1522);
+
+	temp = er32(GPRC);
+	temp = er32(BPRC);
+	temp = er32(MPRC);
+	temp = er32(GPTC);
+	temp = er32(GORCL);
+	temp = er32(GORCH);
+	temp = er32(GOTCL);
+	temp = er32(GOTCH);
+	temp = er32(RNBC);
+	temp = er32(RUC);
+	temp = er32(RFC);
+	temp = er32(ROC);
+	temp = er32(RJC);
+	temp = er32(TORL);
+	temp = er32(TORH);
+	temp = er32(TOTL);
+	temp = er32(TOTH);
+	temp = er32(TPR);
+	temp = er32(TPT);
+
+	temp = er32(PTC64);
+	temp = er32(PTC127);
+	temp = er32(PTC255);
+	temp = er32(PTC511);
+	temp = er32(PTC1023);
+	temp = er32(PTC1522);
+
+	temp = er32(MPTC);
+	temp = er32(BPTC);
+
+	if (hw->mac_type < e1000_82543)
+		return;
+
+	temp = er32(ALGNERRC);
+	temp = er32(RXERRC);
+	temp = er32(TNCRS);
+	temp = er32(CEXTERR);
+	temp = er32(TSCTC);
+	temp = er32(TSCTFC);
+
+	if (hw->mac_type <= e1000_82544)
+		return;
+
+	temp = er32(MGTPRC);
+	temp = er32(MGTPDC);
+	temp = er32(MGTPTC);
+}
+
+/**
+ * e1000_reset_adaptive - Resets Adaptive IFS to its default state.
+ * @hw: Struct containing variables accessed by shared code
  *
  * Call this after e1000_init_hw. You may override the IFS defaults by setting
  * hw->ifs_params_forced to true. However, you must initialize hw->
  * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
  * before calling this function.
- *****************************************************************************/
+ */
 void e1000_reset_adaptive(struct e1000_hw *hw)
 {
-    DEBUGFUNC("e1000_reset_adaptive");
-
-    if (hw->adaptive_ifs) {
-        if (!hw->ifs_params_forced) {
-            hw->current_ifs_val = 0;
-            hw->ifs_min_val = IFS_MIN;
-            hw->ifs_max_val = IFS_MAX;
-            hw->ifs_step_size = IFS_STEP;
-            hw->ifs_ratio = IFS_RATIO;
-        }
-        hw->in_ifs_mode = false;
-        ew32(AIT, 0);
-    } else {
-        DEBUGOUT("Not in Adaptive IFS mode!\n");
-    }
+	DEBUGFUNC("e1000_reset_adaptive");
+
+	if (hw->adaptive_ifs) {
+		if (!hw->ifs_params_forced) {
+			hw->current_ifs_val = 0;
+			hw->ifs_min_val = IFS_MIN;
+			hw->ifs_max_val = IFS_MAX;
+			hw->ifs_step_size = IFS_STEP;
+			hw->ifs_ratio = IFS_RATIO;
+		}
+		hw->in_ifs_mode = false;
+		ew32(AIT, 0);
+	} else {
+		DEBUGOUT("Not in Adaptive IFS mode!\n");
+	}
 }
 
-/******************************************************************************
+/**
+ * e1000_update_adaptive - update adaptive IFS
+ * @hw: Struct containing variables accessed by shared code
+ * @tx_packets: Number of transmits since last callback
+ * @total_collisions: Number of collisions since last callback
+ *
  * Called during the callback/watchdog routine to update IFS value based on
  * the ratio of transmits to collisions.
- *
- * hw - Struct containing variables accessed by shared code
- * tx_packets - Number of transmits since last callback
- * total_collisions - Number of collisions since last callback
- *****************************************************************************/
+ */
 void e1000_update_adaptive(struct e1000_hw *hw)
 {
-    DEBUGFUNC("e1000_update_adaptive");
-
-    if (hw->adaptive_ifs) {
-        if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) {
-            if (hw->tx_packet_delta > MIN_NUM_XMITS) {
-                hw->in_ifs_mode = true;
-                if (hw->current_ifs_val < hw->ifs_max_val) {
-                    if (hw->current_ifs_val == 0)
-                        hw->current_ifs_val = hw->ifs_min_val;
-                    else
-                        hw->current_ifs_val += hw->ifs_step_size;
-                    ew32(AIT, hw->current_ifs_val);
-                }
-            }
-        } else {
-            if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
-                hw->current_ifs_val = 0;
-                hw->in_ifs_mode = false;
-                ew32(AIT, 0);
-            }
-        }
-    } else {
-        DEBUGOUT("Not in Adaptive IFS mode!\n");
-    }
+	DEBUGFUNC("e1000_update_adaptive");
+
+	if (hw->adaptive_ifs) {
+		if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
+			if (hw->tx_packet_delta > MIN_NUM_XMITS) {
+				hw->in_ifs_mode = true;
+				if (hw->current_ifs_val < hw->ifs_max_val) {
+					if (hw->current_ifs_val == 0)
+						hw->current_ifs_val =
+						    hw->ifs_min_val;
+					else
+						hw->current_ifs_val +=
+						    hw->ifs_step_size;
+					ew32(AIT, hw->current_ifs_val);
+				}
+			}
+		} else {
+			if (hw->in_ifs_mode
+			    && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+				hw->current_ifs_val = 0;
+				hw->in_ifs_mode = false;
+				ew32(AIT, 0);
+			}
+		}
+	} else {
+		DEBUGOUT("Not in Adaptive IFS mode!\n");
+	}
 }
 
-/******************************************************************************
- * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
+/**
+ * e1000_tbi_adjust_stats
+ * @hw: Struct containing variables accessed by shared code
+ * @frame_len: The length of the frame in question
+ * @mac_addr: The Ethernet destination address of the frame in question
  *
- * hw - Struct containing variables accessed by shared code
- * frame_len - The length of the frame in question
- * mac_addr - The Ethernet destination address of the frame in question
- *****************************************************************************/
+ * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
+ */
 void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
 			    u32 frame_len, u8 *mac_addr)
 {
-    u64 carry_bit;
-
-    /* First adjust the frame length. */
-    frame_len--;
-    /* We need to adjust the statistics counters, since the hardware
-     * counters overcount this packet as a CRC error and undercount
-     * the packet as a good packet
-     */
-    /* This packet should not be counted as a CRC error.    */
-    stats->crcerrs--;
-    /* This packet does count as a Good Packet Received.    */
-    stats->gprc++;
-
-    /* Adjust the Good Octets received counters             */
-    carry_bit = 0x80000000 & stats->gorcl;
-    stats->gorcl += frame_len;
-    /* If the high bit of Gorcl (the low 32 bits of the Good Octets
-     * Received Count) was one before the addition,
-     * AND it is zero after, then we lost the carry out,
-     * need to add one to Gorch (Good Octets Received Count High).
-     * This could be simplified if all environments supported
-     * 64-bit integers.
-     */
-    if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
-        stats->gorch++;
-    /* Is this a broadcast or multicast?  Check broadcast first,
-     * since the test for a multicast frame will test positive on
-     * a broadcast frame.
-     */
-    if ((mac_addr[0] == (u8)0xff) && (mac_addr[1] == (u8)0xff))
-        /* Broadcast packet */
-        stats->bprc++;
-    else if (*mac_addr & 0x01)
-        /* Multicast packet */
-        stats->mprc++;
-
-    if (frame_len == hw->max_frame_size) {
-        /* In this case, the hardware has overcounted the number of
-         * oversize frames.
-         */
-        if (stats->roc > 0)
-            stats->roc--;
-    }
-
-    /* Adjust the bin counters when the extra byte put the frame in the
-     * wrong bin. Remember that the frame_len was adjusted above.
-     */
-    if (frame_len == 64) {
-        stats->prc64++;
-        stats->prc127--;
-    } else if (frame_len == 127) {
-        stats->prc127++;
-        stats->prc255--;
-    } else if (frame_len == 255) {
-        stats->prc255++;
-        stats->prc511--;
-    } else if (frame_len == 511) {
-        stats->prc511++;
-        stats->prc1023--;
-    } else if (frame_len == 1023) {
-        stats->prc1023++;
-        stats->prc1522--;
-    } else if (frame_len == 1522) {
-        stats->prc1522++;
-    }
+	u64 carry_bit;
+
+	/* First adjust the frame length. */
+	frame_len--;
+	/* We need to adjust the statistics counters, since the hardware
+	 * counters overcount this packet as a CRC error and undercount
+	 * the packet as a good packet
+	 */
+	/* This packet should not be counted as a CRC error.    */
+	stats->crcerrs--;
+	/* This packet does count as a Good Packet Received.    */
+	stats->gprc++;
+
+	/* Adjust the Good Octets received counters             */
+	carry_bit = 0x80000000 & stats->gorcl;
+	stats->gorcl += frame_len;
+	/* If the high bit of Gorcl (the low 32 bits of the Good Octets
+	 * Received Count) was one before the addition,
+	 * AND it is zero after, then we lost the carry out,
+	 * need to add one to Gorch (Good Octets Received Count High).
+	 * This could be simplified if all environments supported
+	 * 64-bit integers.
+	 */
+	if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
+		stats->gorch++;
+	/* Is this a broadcast or multicast?  Check broadcast first,
+	 * since the test for a multicast frame will test positive on
+	 * a broadcast frame.
+	 */
+	if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff))
+		/* Broadcast packet */
+		stats->bprc++;
+	else if (*mac_addr & 0x01)
+		/* Multicast packet */
+		stats->mprc++;
+
+	if (frame_len == hw->max_frame_size) {
+		/* In this case, the hardware has overcounted the number of
+		 * oversize frames.
+		 */
+		if (stats->roc > 0)
+			stats->roc--;
+	}
+
+	/* Adjust the bin counters when the extra byte put the frame in the
+	 * wrong bin. Remember that the frame_len was adjusted above.
+	 */
+	if (frame_len == 64) {
+		stats->prc64++;
+		stats->prc127--;
+	} else if (frame_len == 127) {
+		stats->prc127++;
+		stats->prc255--;
+	} else if (frame_len == 255) {
+		stats->prc255++;
+		stats->prc511--;
+	} else if (frame_len == 511) {
+		stats->prc511++;
+		stats->prc1023--;
+	} else if (frame_len == 1023) {
+		stats->prc1023++;
+		stats->prc1522--;
+	} else if (frame_len == 1522) {
+		stats->prc1522++;
+	}
 }
 
-/******************************************************************************
- * Gets the current PCI bus type, speed, and width of the hardware
+/**
+ * e1000_get_bus_info
+ * @hw: Struct containing variables accessed by shared code
  *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+ * Gets the current PCI bus type, speed, and width of the hardware
+ */
 void e1000_get_bus_info(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    u16 pci_ex_link_status;
-    u32 status;
-
-    switch (hw->mac_type) {
-    case e1000_82542_rev2_0:
-    case e1000_82542_rev2_1:
-        hw->bus_type = e1000_bus_type_pci;
-        hw->bus_speed = e1000_bus_speed_unknown;
-        hw->bus_width = e1000_bus_width_unknown;
-        break;
-    case e1000_82571:
-    case e1000_82572:
-    case e1000_82573:
-    case e1000_80003es2lan:
-        hw->bus_type = e1000_bus_type_pci_express;
-        hw->bus_speed = e1000_bus_speed_2500;
-        ret_val = e1000_read_pcie_cap_reg(hw,
-                                      PCI_EX_LINK_STATUS,
-                                      &pci_ex_link_status);
-        if (ret_val)
-            hw->bus_width = e1000_bus_width_unknown;
-        else
-            hw->bus_width = (pci_ex_link_status & PCI_EX_LINK_WIDTH_MASK) >>
-                          PCI_EX_LINK_WIDTH_SHIFT;
-        break;
-    case e1000_ich8lan:
-        hw->bus_type = e1000_bus_type_pci_express;
-        hw->bus_speed = e1000_bus_speed_2500;
-        hw->bus_width = e1000_bus_width_pciex_1;
-        break;
-    default:
-        status = er32(STATUS);
-        hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
-                       e1000_bus_type_pcix : e1000_bus_type_pci;
-
-        if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
-            hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
-                            e1000_bus_speed_66 : e1000_bus_speed_120;
-        } else if (hw->bus_type == e1000_bus_type_pci) {
-            hw->bus_speed = (status & E1000_STATUS_PCI66) ?
-                            e1000_bus_speed_66 : e1000_bus_speed_33;
-        } else {
-            switch (status & E1000_STATUS_PCIX_SPEED) {
-            case E1000_STATUS_PCIX_SPEED_66:
-                hw->bus_speed = e1000_bus_speed_66;
-                break;
-            case E1000_STATUS_PCIX_SPEED_100:
-                hw->bus_speed = e1000_bus_speed_100;
-                break;
-            case E1000_STATUS_PCIX_SPEED_133:
-                hw->bus_speed = e1000_bus_speed_133;
-                break;
-            default:
-                hw->bus_speed = e1000_bus_speed_reserved;
-                break;
-            }
-        }
-        hw->bus_width = (status & E1000_STATUS_BUS64) ?
-                        e1000_bus_width_64 : e1000_bus_width_32;
-        break;
-    }
+	u32 status;
+
+	switch (hw->mac_type) {
+	case e1000_82542_rev2_0:
+	case e1000_82542_rev2_1:
+		hw->bus_type = e1000_bus_type_pci;
+		hw->bus_speed = e1000_bus_speed_unknown;
+		hw->bus_width = e1000_bus_width_unknown;
+		break;
+	default:
+		status = er32(STATUS);
+		hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
+		    e1000_bus_type_pcix : e1000_bus_type_pci;
+
+		if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
+			hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
+			    e1000_bus_speed_66 : e1000_bus_speed_120;
+		} else if (hw->bus_type == e1000_bus_type_pci) {
+			hw->bus_speed = (status & E1000_STATUS_PCI66) ?
+			    e1000_bus_speed_66 : e1000_bus_speed_33;
+		} else {
+			switch (status & E1000_STATUS_PCIX_SPEED) {
+			case E1000_STATUS_PCIX_SPEED_66:
+				hw->bus_speed = e1000_bus_speed_66;
+				break;
+			case E1000_STATUS_PCIX_SPEED_100:
+				hw->bus_speed = e1000_bus_speed_100;
+				break;
+			case E1000_STATUS_PCIX_SPEED_133:
+				hw->bus_speed = e1000_bus_speed_133;
+				break;
+			default:
+				hw->bus_speed = e1000_bus_speed_reserved;
+				break;
+			}
+		}
+		hw->bus_width = (status & E1000_STATUS_BUS64) ?
+		    e1000_bus_width_64 : e1000_bus_width_32;
+		break;
+	}
 }
 
-/******************************************************************************
+/**
+ * e1000_write_reg_io
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset to write to
+ * @value: value to write
+ *
  * Writes a value to one of the devices registers using port I/O (as opposed to
  * memory mapped I/O). Only 82544 and newer devices support port I/O.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset to write to
- * value - value to write
- *****************************************************************************/
+ */
 static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
 {
-    unsigned long io_addr = hw->io_base;
-    unsigned long io_data = hw->io_base + 4;
+	unsigned long io_addr = hw->io_base;
+	unsigned long io_data = hw->io_base + 4;
 
-    e1000_io_write(hw, io_addr, offset);
-    e1000_io_write(hw, io_data, value);
+	e1000_io_write(hw, io_addr, offset);
+	e1000_io_write(hw, io_data, value);
 }
 
-/******************************************************************************
- * Estimates the cable length.
- *
- * hw - Struct containing variables accessed by shared code
- * min_length - The estimated minimum length
- * max_length - The estimated maximum length
+/**
+ * e1000_get_cable_length - Estimates the cable length.
+ * @hw: Struct containing variables accessed by shared code
+ * @min_length: The estimated minimum length
+ * @max_length: The estimated maximum length
  *
  * returns: - E1000_ERR_XXX
  *            E1000_SUCCESS
@@ -6528,185 +4842,115 @@ static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
  * So for M88 phy's, this function interprets the one value returned from the
  * register to the minimum and maximum range.
  * For IGP phy's, the function calculates the range by the AGC registers.
- *****************************************************************************/
+ */
 static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
 				  u16 *max_length)
 {
-    s32 ret_val;
-    u16 agc_value = 0;
-    u16 i, phy_data;
-    u16 cable_length;
-
-    DEBUGFUNC("e1000_get_cable_length");
-
-    *min_length = *max_length = 0;
-
-    /* Use old method for Phy older than IGP */
-    if (hw->phy_type == e1000_phy_m88) {
-
-        ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
-                                     &phy_data);
-        if (ret_val)
-            return ret_val;
-        cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
-                       M88E1000_PSSR_CABLE_LENGTH_SHIFT;
-
-        /* Convert the enum value to ranged values */
-        switch (cable_length) {
-        case e1000_cable_length_50:
-            *min_length = 0;
-            *max_length = e1000_igp_cable_length_50;
-            break;
-        case e1000_cable_length_50_80:
-            *min_length = e1000_igp_cable_length_50;
-            *max_length = e1000_igp_cable_length_80;
-            break;
-        case e1000_cable_length_80_110:
-            *min_length = e1000_igp_cable_length_80;
-            *max_length = e1000_igp_cable_length_110;
-            break;
-        case e1000_cable_length_110_140:
-            *min_length = e1000_igp_cable_length_110;
-            *max_length = e1000_igp_cable_length_140;
-            break;
-        case e1000_cable_length_140:
-            *min_length = e1000_igp_cable_length_140;
-            *max_length = e1000_igp_cable_length_170;
-            break;
-        default:
-            return -E1000_ERR_PHY;
-            break;
-        }
-    } else if (hw->phy_type == e1000_phy_gg82563) {
-        ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
-                                     &phy_data);
-        if (ret_val)
-            return ret_val;
-        cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH;
-
-        switch (cable_length) {
-        case e1000_gg_cable_length_60:
-            *min_length = 0;
-            *max_length = e1000_igp_cable_length_60;
-            break;
-        case e1000_gg_cable_length_60_115:
-            *min_length = e1000_igp_cable_length_60;
-            *max_length = e1000_igp_cable_length_115;
-            break;
-        case e1000_gg_cable_length_115_150:
-            *min_length = e1000_igp_cable_length_115;
-            *max_length = e1000_igp_cable_length_150;
-            break;
-        case e1000_gg_cable_length_150:
-            *min_length = e1000_igp_cable_length_150;
-            *max_length = e1000_igp_cable_length_180;
-            break;
-        default:
-            return -E1000_ERR_PHY;
-            break;
-        }
-    } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
-        u16 cur_agc_value;
-        u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
-        u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
-                                                         {IGP01E1000_PHY_AGC_A,
-                                                          IGP01E1000_PHY_AGC_B,
-                                                          IGP01E1000_PHY_AGC_C,
-                                                          IGP01E1000_PHY_AGC_D};
-        /* Read the AGC registers for all channels */
-        for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
-
-            ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
-
-            /* Value bound check. */
-            if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
-                (cur_agc_value == 0))
-                return -E1000_ERR_PHY;
-
-            agc_value += cur_agc_value;
-
-            /* Update minimal AGC value. */
-            if (min_agc_value > cur_agc_value)
-                min_agc_value = cur_agc_value;
-        }
-
-        /* Remove the minimal AGC result for length < 50m */
-        if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
-            agc_value -= min_agc_value;
-
-            /* Get the average length of the remaining 3 channels */
-            agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
-        } else {
-            /* Get the average length of all the 4 channels. */
-            agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
-        }
-
-        /* Set the range of the calculated length. */
-        *min_length = ((e1000_igp_cable_length_table[agc_value] -
-                       IGP01E1000_AGC_RANGE) > 0) ?
-                       (e1000_igp_cable_length_table[agc_value] -
-                       IGP01E1000_AGC_RANGE) : 0;
-        *max_length = e1000_igp_cable_length_table[agc_value] +
-                      IGP01E1000_AGC_RANGE;
-    } else if (hw->phy_type == e1000_phy_igp_2 ||
-               hw->phy_type == e1000_phy_igp_3) {
-        u16 cur_agc_index, max_agc_index = 0;
-        u16 min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
-        u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
-                                                         {IGP02E1000_PHY_AGC_A,
-                                                          IGP02E1000_PHY_AGC_B,
-                                                          IGP02E1000_PHY_AGC_C,
-                                                          IGP02E1000_PHY_AGC_D};
-        /* Read the AGC registers for all channels */
-        for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
-            ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            /* Getting bits 15:9, which represent the combination of course and
-             * fine gain values.  The result is a number that can be put into
-             * the lookup table to obtain the approximate cable length. */
-            cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
-                            IGP02E1000_AGC_LENGTH_MASK;
-
-            /* Array index bound check. */
-            if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) ||
-                (cur_agc_index == 0))
-                return -E1000_ERR_PHY;
-
-            /* Remove min & max AGC values from calculation. */
-            if (e1000_igp_2_cable_length_table[min_agc_index] >
-                e1000_igp_2_cable_length_table[cur_agc_index])
-                min_agc_index = cur_agc_index;
-            if (e1000_igp_2_cable_length_table[max_agc_index] <
-                e1000_igp_2_cable_length_table[cur_agc_index])
-                max_agc_index = cur_agc_index;
-
-            agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
-        }
-
-        agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
-                      e1000_igp_2_cable_length_table[max_agc_index]);
-        agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
-
-        /* Calculate cable length with the error range of +/- 10 meters. */
-        *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
-                       (agc_value - IGP02E1000_AGC_RANGE) : 0;
-        *max_length = agc_value + IGP02E1000_AGC_RANGE;
-    }
-
-    return E1000_SUCCESS;
+	s32 ret_val;
+	u16 agc_value = 0;
+	u16 i, phy_data;
+	u16 cable_length;
+
+	DEBUGFUNC("e1000_get_cable_length");
+
+	*min_length = *max_length = 0;
+
+	/* Use old method for Phy older than IGP */
+	if (hw->phy_type == e1000_phy_m88) {
+
+		ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+					     &phy_data);
+		if (ret_val)
+			return ret_val;
+		cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+		    M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+
+		/* Convert the enum value to ranged values */
+		switch (cable_length) {
+		case e1000_cable_length_50:
+			*min_length = 0;
+			*max_length = e1000_igp_cable_length_50;
+			break;
+		case e1000_cable_length_50_80:
+			*min_length = e1000_igp_cable_length_50;
+			*max_length = e1000_igp_cable_length_80;
+			break;
+		case e1000_cable_length_80_110:
+			*min_length = e1000_igp_cable_length_80;
+			*max_length = e1000_igp_cable_length_110;
+			break;
+		case e1000_cable_length_110_140:
+			*min_length = e1000_igp_cable_length_110;
+			*max_length = e1000_igp_cable_length_140;
+			break;
+		case e1000_cable_length_140:
+			*min_length = e1000_igp_cable_length_140;
+			*max_length = e1000_igp_cable_length_170;
+			break;
+		default:
+			return -E1000_ERR_PHY;
+			break;
+		}
+	} else if (hw->phy_type == e1000_phy_igp) {	/* For IGP PHY */
+		u16 cur_agc_value;
+		u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+		u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+		    { IGP01E1000_PHY_AGC_A,
+			IGP01E1000_PHY_AGC_B,
+			IGP01E1000_PHY_AGC_C,
+			IGP01E1000_PHY_AGC_D
+		};
+		/* Read the AGC registers for all channels */
+		for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+
+			ret_val =
+			    e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+			if (ret_val)
+				return ret_val;
+
+			cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+
+			/* Value bound check. */
+			if ((cur_agc_value >=
+			     IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1)
+			    || (cur_agc_value == 0))
+				return -E1000_ERR_PHY;
+
+			agc_value += cur_agc_value;
+
+			/* Update minimal AGC value. */
+			if (min_agc_value > cur_agc_value)
+				min_agc_value = cur_agc_value;
+		}
+
+		/* Remove the minimal AGC result for length < 50m */
+		if (agc_value <
+		    IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+			agc_value -= min_agc_value;
+
+			/* Get the average length of the remaining 3 channels */
+			agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
+		} else {
+			/* Get the average length of all the 4 channels. */
+			agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
+		}
+
+		/* Set the range of the calculated length. */
+		*min_length = ((e1000_igp_cable_length_table[agc_value] -
+				IGP01E1000_AGC_RANGE) > 0) ?
+		    (e1000_igp_cable_length_table[agc_value] -
+		     IGP01E1000_AGC_RANGE) : 0;
+		*max_length = e1000_igp_cable_length_table[agc_value] +
+		    IGP01E1000_AGC_RANGE;
+	}
+
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Check the cable polarity
- *
- * hw - Struct containing variables accessed by shared code
- * polarity - output parameter : 0 - Polarity is not reversed
+/**
+ * e1000_check_polarity - Check the cable polarity
+ * @hw: Struct containing variables accessed by shared code
+ * @polarity: output parameter : 0 - Polarity is not reversed
  *                               1 - Polarity is reversed.
  *
  * returns: - E1000_ERR_XXX
@@ -6717,73 +4961,65 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
  * 10 Mbps.  If the link speed is 100 Mbps there is no polarity so this bit will
  * return 0.  If the link speed is 1000 Mbps the polarity status is in the
  * IGP01E1000_PHY_PCS_INIT_REG.
- *****************************************************************************/
+ */
 static s32 e1000_check_polarity(struct e1000_hw *hw,
 				e1000_rev_polarity *polarity)
 {
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_check_polarity");
-
-    if ((hw->phy_type == e1000_phy_m88) ||
-        (hw->phy_type == e1000_phy_gg82563)) {
-        /* return the Polarity bit in the Status register. */
-        ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
-                                     &phy_data);
-        if (ret_val)
-            return ret_val;
-        *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
-                     M88E1000_PSSR_REV_POLARITY_SHIFT) ?
-                     e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
-
-    } else if (hw->phy_type == e1000_phy_igp ||
-              hw->phy_type == e1000_phy_igp_3 ||
-              hw->phy_type == e1000_phy_igp_2) {
-        /* Read the Status register to check the speed */
-        ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
-                                     &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
-         * find the polarity status */
-        if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
-           IGP01E1000_PSSR_SPEED_1000MBPS) {
-
-            /* Read the GIG initialization PCS register (0x00B4) */
-            ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
-                                         &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            /* Check the polarity bits */
-            *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
-                         e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
-        } else {
-            /* For 10 Mbps, read the polarity bit in the status register. (for
-             * 100 Mbps this bit is always 0) */
-            *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
-                         e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
-        }
-    } else if (hw->phy_type == e1000_phy_ife) {
-        ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL,
-                                     &phy_data);
-        if (ret_val)
-            return ret_val;
-        *polarity = ((phy_data & IFE_PESC_POLARITY_REVERSED) >>
-                     IFE_PESC_POLARITY_REVERSED_SHIFT) ?
-                     e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
-    }
-    return E1000_SUCCESS;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_check_polarity");
+
+	if (hw->phy_type == e1000_phy_m88) {
+		/* return the Polarity bit in the Status register. */
+		ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+					     &phy_data);
+		if (ret_val)
+			return ret_val;
+		*polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
+			     M88E1000_PSSR_REV_POLARITY_SHIFT) ?
+		    e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+
+	} else if (hw->phy_type == e1000_phy_igp) {
+		/* Read the Status register to check the speed */
+		ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
+					     &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
+		 * find the polarity status */
+		if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+		    IGP01E1000_PSSR_SPEED_1000MBPS) {
+
+			/* Read the GIG initialization PCS register (0x00B4) */
+			ret_val =
+			    e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
+					       &phy_data);
+			if (ret_val)
+				return ret_val;
+
+			/* Check the polarity bits */
+			*polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
+			    e1000_rev_polarity_reversed :
+			    e1000_rev_polarity_normal;
+		} else {
+			/* For 10 Mbps, read the polarity bit in the status register. (for
+			 * 100 Mbps this bit is always 0) */
+			*polarity =
+			    (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
+			    e1000_rev_polarity_reversed :
+			    e1000_rev_polarity_normal;
+		}
+	}
+	return E1000_SUCCESS;
 }
 
-/******************************************************************************
- * Check if Downshift occured
- *
- * hw - Struct containing variables accessed by shared code
- * downshift - output parameter : 0 - No Downshift ocured.
- *                                1 - Downshift ocured.
+/**
+ * e1000_check_downshift - Check if Downshift occurred
+ * @hw: Struct containing variables accessed by shared code
+ * @downshift: output parameter : 0 - No Downshift occurred.
+ *                                1 - Downshift occurred.
  *
  * returns: - E1000_ERR_XXX
  *            E1000_SUCCESS
@@ -6792,2041 +5028,607 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
  * Specific Status register.  For IGP phy's, it reads the Downgrade bit in the
  * Link Health register.  In IGP this bit is latched high, so the driver must
  * read it immediately after link is established.
- *****************************************************************************/
+ */
 static s32 e1000_check_downshift(struct e1000_hw *hw)
 {
-    s32 ret_val;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_check_downshift");
-
-    if (hw->phy_type == e1000_phy_igp ||
-        hw->phy_type == e1000_phy_igp_3 ||
-        hw->phy_type == e1000_phy_igp_2) {
-        ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
-                                     &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
-    } else if ((hw->phy_type == e1000_phy_m88) ||
-               (hw->phy_type == e1000_phy_gg82563)) {
-        ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
-                                     &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
-                               M88E1000_PSSR_DOWNSHIFT_SHIFT;
-    } else if (hw->phy_type == e1000_phy_ife) {
-        /* e1000_phy_ife supports 10/100 speed only */
-        hw->speed_downgraded = false;
-    }
-
-    return E1000_SUCCESS;
-}
+	s32 ret_val;
+	u16 phy_data;
 
-/*****************************************************************************
- *
- * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
- * gigabit link is achieved to improve link quality.
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - E1000_ERR_PHY if fail to read/write the PHY
- *            E1000_SUCCESS at any other case.
- *
- ****************************************************************************/
+	DEBUGFUNC("e1000_check_downshift");
 
-static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
-{
-    s32 ret_val;
-    u16 phy_data, phy_saved_data, speed, duplex, i;
-    u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
-                                        {IGP01E1000_PHY_AGC_PARAM_A,
-                                        IGP01E1000_PHY_AGC_PARAM_B,
-                                        IGP01E1000_PHY_AGC_PARAM_C,
-                                        IGP01E1000_PHY_AGC_PARAM_D};
-    u16 min_length, max_length;
-
-    DEBUGFUNC("e1000_config_dsp_after_link_change");
-
-    if (hw->phy_type != e1000_phy_igp)
-        return E1000_SUCCESS;
-
-    if (link_up) {
-        ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
-        if (ret_val) {
-            DEBUGOUT("Error getting link speed and duplex\n");
-            return ret_val;
-        }
-
-        if (speed == SPEED_1000) {
-
-            ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
-            if (ret_val)
-                return ret_val;
-
-            if ((hw->dsp_config_state == e1000_dsp_config_enabled) &&
-                min_length >= e1000_igp_cable_length_50) {
-
-                for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
-                    ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i],
-                                                 &phy_data);
-                    if (ret_val)
-                        return ret_val;
-
-                    phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
-
-                    ret_val = e1000_write_phy_reg(hw, dsp_reg_array[i],
-                                                  phy_data);
-                    if (ret_val)
-                        return ret_val;
-                }
-                hw->dsp_config_state = e1000_dsp_config_activated;
-            }
-
-            if ((hw->ffe_config_state == e1000_ffe_config_enabled) &&
-               (min_length < e1000_igp_cable_length_50)) {
-
-                u16 ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20;
-                u32 idle_errs = 0;
-
-                /* clear previous idle error counts */
-                ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
-                                             &phy_data);
-                if (ret_val)
-                    return ret_val;
-
-                for (i = 0; i < ffe_idle_err_timeout; i++) {
-                    udelay(1000);
-                    ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
-                                                 &phy_data);
-                    if (ret_val)
-                        return ret_val;
-
-                    idle_errs += (phy_data & SR_1000T_IDLE_ERROR_CNT);
-                    if (idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) {
-                        hw->ffe_config_state = e1000_ffe_config_active;
-
-                        ret_val = e1000_write_phy_reg(hw,
-                                    IGP01E1000_PHY_DSP_FFE,
-                                    IGP01E1000_PHY_DSP_FFE_CM_CP);
-                        if (ret_val)
-                            return ret_val;
-                        break;
-                    }
-
-                    if (idle_errs)
-                        ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_100;
-                }
-            }
-        }
-    } else {
-        if (hw->dsp_config_state == e1000_dsp_config_activated) {
-            /* Save off the current value of register 0x2F5B to be restored at
-             * the end of the routines. */
-            ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-
-            if (ret_val)
-                return ret_val;
-
-            /* Disable the PHY transmitter */
-            ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
-
-            if (ret_val)
-                return ret_val;
-
-            mdelay(20);
-
-            ret_val = e1000_write_phy_reg(hw, 0x0000,
-                                          IGP01E1000_IEEE_FORCE_GIGA);
-            if (ret_val)
-                return ret_val;
-            for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
-                ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], &phy_data);
-                if (ret_val)
-                    return ret_val;
-
-                phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
-                phy_data |=  IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
-
-                ret_val = e1000_write_phy_reg(hw,dsp_reg_array[i], phy_data);
-                if (ret_val)
-                    return ret_val;
-            }
-
-            ret_val = e1000_write_phy_reg(hw, 0x0000,
-                                          IGP01E1000_IEEE_RESTART_AUTONEG);
-            if (ret_val)
-                return ret_val;
-
-            mdelay(20);
-
-            /* Now enable the transmitter */
-            ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
-
-            if (ret_val)
-                return ret_val;
-
-            hw->dsp_config_state = e1000_dsp_config_enabled;
-        }
-
-        if (hw->ffe_config_state == e1000_ffe_config_active) {
-            /* Save off the current value of register 0x2F5B to be restored at
-             * the end of the routines. */
-            ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-
-            if (ret_val)
-                return ret_val;
-
-            /* Disable the PHY transmitter */
-            ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
-
-            if (ret_val)
-                return ret_val;
-
-            mdelay(20);
-
-            ret_val = e1000_write_phy_reg(hw, 0x0000,
-                                          IGP01E1000_IEEE_FORCE_GIGA);
-            if (ret_val)
-                return ret_val;
-            ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
-                                          IGP01E1000_PHY_DSP_FFE_DEFAULT);
-            if (ret_val)
-                return ret_val;
-
-            ret_val = e1000_write_phy_reg(hw, 0x0000,
-                                          IGP01E1000_IEEE_RESTART_AUTONEG);
-            if (ret_val)
-                return ret_val;
-
-            mdelay(20);
-
-            /* Now enable the transmitter */
-            ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
-
-            if (ret_val)
-                return ret_val;
-
-            hw->ffe_config_state = e1000_ffe_config_enabled;
-        }
-    }
-    return E1000_SUCCESS;
-}
+	if (hw->phy_type == e1000_phy_igp) {
+		ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
+					     &phy_data);
+		if (ret_val)
+			return ret_val;
 
-/*****************************************************************************
- * Set PHY to class A mode
- * Assumes the following operations will follow to enable the new class mode.
- *  1. Do a PHY soft reset
- *  2. Restart auto-negotiation or force link.
- *
- * hw - Struct containing variables accessed by shared code
- ****************************************************************************/
-static s32 e1000_set_phy_mode(struct e1000_hw *hw)
-{
-    s32 ret_val;
-    u16 eeprom_data;
-
-    DEBUGFUNC("e1000_set_phy_mode");
-
-    if ((hw->mac_type == e1000_82545_rev_3) &&
-        (hw->media_type == e1000_media_type_copper)) {
-        ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, &eeprom_data);
-        if (ret_val) {
-            return ret_val;
-        }
-
-        if ((eeprom_data != EEPROM_RESERVED_WORD) &&
-            (eeprom_data & EEPROM_PHY_CLASS_A)) {
-            ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x000B);
-            if (ret_val)
-                return ret_val;
-            ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x8104);
-            if (ret_val)
-                return ret_val;
-
-            hw->phy_reset_disable = false;
-        }
-    }
-
-    return E1000_SUCCESS;
-}
+		hw->speed_downgraded =
+		    (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
+	} else if (hw->phy_type == e1000_phy_m88) {
+		ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+					     &phy_data);
+		if (ret_val)
+			return ret_val;
 
-/*****************************************************************************
- *
- * This function sets the lplu state according to the active flag.  When
- * activating lplu this function also disables smart speed and vise versa.
- * lplu will not be activated unless the device autonegotiation advertisment
- * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
- * hw: Struct containing variables accessed by shared code
- * active - true to enable lplu false to disable lplu.
- *
- * returns: - E1000_ERR_PHY if fail to read/write the PHY
- *            E1000_SUCCESS at any other case.
- *
- ****************************************************************************/
+		hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
+		    M88E1000_PSSR_DOWNSHIFT_SHIFT;
+	}
 
-static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
-{
-    u32 phy_ctrl = 0;
-    s32 ret_val;
-    u16 phy_data;
-    DEBUGFUNC("e1000_set_d3_lplu_state");
-
-    if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
-        && hw->phy_type != e1000_phy_igp_3)
-        return E1000_SUCCESS;
-
-    /* During driver activity LPLU should not be used or it will attain link
-     * from the lowest speeds starting from 10Mbps. The capability is used for
-     * Dx transitions and states */
-    if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
-        ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
-        if (ret_val)
-            return ret_val;
-    } else if (hw->mac_type == e1000_ich8lan) {
-        /* MAC writes into PHY register based on the state transition
-         * and start auto-negotiation. SW driver can overwrite the settings
-         * in CSR PHY power control E1000_PHY_CTRL register. */
-        phy_ctrl = er32(PHY_CTRL);
-    } else {
-        ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
-        if (ret_val)
-            return ret_val;
-    }
-
-    if (!active) {
-        if (hw->mac_type == e1000_82541_rev_2 ||
-            hw->mac_type == e1000_82547_rev_2) {
-            phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
-            ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
-            if (ret_val)
-                return ret_val;
-        } else {
-            if (hw->mac_type == e1000_ich8lan) {
-                phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
-                ew32(PHY_CTRL, phy_ctrl);
-            } else {
-                phy_data &= ~IGP02E1000_PM_D3_LPLU;
-                ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-                                              phy_data);
-                if (ret_val)
-                    return ret_val;
-            }
-        }
-
-        /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used during
-         * Dx states where the power conservation is most important.  During
-         * driver activity we should enable SmartSpeed, so performance is
-         * maintained. */
-        if (hw->smart_speed == e1000_smart_speed_on) {
-            ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                         &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
-            ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                          phy_data);
-            if (ret_val)
-                return ret_val;
-        } else if (hw->smart_speed == e1000_smart_speed_off) {
-            ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                         &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-            ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                          phy_data);
-            if (ret_val)
-                return ret_val;
-        }
-
-    } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) ||
-               (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) ||
-               (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
-
-        if (hw->mac_type == e1000_82541_rev_2 ||
-            hw->mac_type == e1000_82547_rev_2) {
-            phy_data |= IGP01E1000_GMII_FLEX_SPD;
-            ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
-            if (ret_val)
-                return ret_val;
-        } else {
-            if (hw->mac_type == e1000_ich8lan) {
-                phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
-                ew32(PHY_CTRL, phy_ctrl);
-            } else {
-                phy_data |= IGP02E1000_PM_D3_LPLU;
-                ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-                                              phy_data);
-                if (ret_val)
-                    return ret_val;
-            }
-        }
-
-        /* When LPLU is enabled we should disable SmartSpeed */
-        ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-        ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
-        if (ret_val)
-            return ret_val;
-
-    }
-    return E1000_SUCCESS;
+	return E1000_SUCCESS;
 }
 
-/*****************************************************************************
- *
- * This function sets the lplu d0 state according to the active flag.  When
- * activating lplu this function also disables smart speed and vise versa.
- * lplu will not be activated unless the device autonegotiation advertisment
- * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
- * hw: Struct containing variables accessed by shared code
- * active - true to enable lplu false to disable lplu.
+/**
+ * e1000_config_dsp_after_link_change
+ * @hw: Struct containing variables accessed by shared code
+ * @link_up: was link up at the time this was called
  *
  * returns: - E1000_ERR_PHY if fail to read/write the PHY
  *            E1000_SUCCESS at any other case.
  *
- ****************************************************************************/
-
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
-{
-    u32 phy_ctrl = 0;
-    s32 ret_val;
-    u16 phy_data;
-    DEBUGFUNC("e1000_set_d0_lplu_state");
-
-    if (hw->mac_type <= e1000_82547_rev_2)
-        return E1000_SUCCESS;
-
-    if (hw->mac_type == e1000_ich8lan) {
-        phy_ctrl = er32(PHY_CTRL);
-    } else {
-        ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
-        if (ret_val)
-            return ret_val;
-    }
-
-    if (!active) {
-        if (hw->mac_type == e1000_ich8lan) {
-            phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
-            ew32(PHY_CTRL, phy_ctrl);
-        } else {
-            phy_data &= ~IGP02E1000_PM_D0_LPLU;
-            ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
-            if (ret_val)
-                return ret_val;
-        }
-
-        /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used during
-         * Dx states where the power conservation is most important.  During
-         * driver activity we should enable SmartSpeed, so performance is
-         * maintained. */
-        if (hw->smart_speed == e1000_smart_speed_on) {
-            ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                         &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
-            ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                          phy_data);
-            if (ret_val)
-                return ret_val;
-        } else if (hw->smart_speed == e1000_smart_speed_off) {
-            ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                         &phy_data);
-            if (ret_val)
-                return ret_val;
-
-            phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-            ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-                                          phy_data);
-            if (ret_val)
-                return ret_val;
-        }
-
-
-    } else {
-
-        if (hw->mac_type == e1000_ich8lan) {
-            phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
-            ew32(PHY_CTRL, phy_ctrl);
-        } else {
-            phy_data |= IGP02E1000_PM_D0_LPLU;
-            ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
-            if (ret_val)
-                return ret_val;
-        }
-
-        /* When LPLU is enabled we should disable SmartSpeed */
-        ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
-        if (ret_val)
-            return ret_val;
-
-        phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-        ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
-        if (ret_val)
-            return ret_val;
-
-    }
-    return E1000_SUCCESS;
-}
+ * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
+ * gigabit link is achieved to improve link quality.
+ */
 
-/******************************************************************************
- * Change VCO speed register to improve Bit Error Rate performance of SERDES.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static s32 e1000_set_vco_speed(struct e1000_hw *hw)
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
 {
-    s32  ret_val;
-    u16 default_page = 0;
-    u16 phy_data;
-
-    DEBUGFUNC("e1000_set_vco_speed");
+	s32 ret_val;
+	u16 phy_data, phy_saved_data, speed, duplex, i;
+	u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+	    { IGP01E1000_PHY_AGC_PARAM_A,
+		IGP01E1000_PHY_AGC_PARAM_B,
+		IGP01E1000_PHY_AGC_PARAM_C,
+		IGP01E1000_PHY_AGC_PARAM_D
+	};
+	u16 min_length, max_length;
+
+	DEBUGFUNC("e1000_config_dsp_after_link_change");
+
+	if (hw->phy_type != e1000_phy_igp)
+		return E1000_SUCCESS;
+
+	if (link_up) {
+		ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+		if (ret_val) {
+			DEBUGOUT("Error getting link speed and duplex\n");
+			return ret_val;
+		}
 
-    switch (hw->mac_type) {
-    case e1000_82545_rev_3:
-    case e1000_82546_rev_3:
-       break;
-    default:
-        return E1000_SUCCESS;
-    }
+		if (speed == SPEED_1000) {
+
+			ret_val =
+			    e1000_get_cable_length(hw, &min_length,
+						   &max_length);
+			if (ret_val)
+				return ret_val;
+
+			if ((hw->dsp_config_state == e1000_dsp_config_enabled)
+			    && min_length >= e1000_igp_cable_length_50) {
+
+				for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+					ret_val =
+					    e1000_read_phy_reg(hw,
+							       dsp_reg_array[i],
+							       &phy_data);
+					if (ret_val)
+						return ret_val;
+
+					phy_data &=
+					    ~IGP01E1000_PHY_EDAC_MU_INDEX;
+
+					ret_val =
+					    e1000_write_phy_reg(hw,
+								dsp_reg_array
+								[i], phy_data);
+					if (ret_val)
+						return ret_val;
+				}
+				hw->dsp_config_state =
+				    e1000_dsp_config_activated;
+			}
+
+			if ((hw->ffe_config_state == e1000_ffe_config_enabled)
+			    && (min_length < e1000_igp_cable_length_50)) {
+
+				u16 ffe_idle_err_timeout =
+				    FFE_IDLE_ERR_COUNT_TIMEOUT_20;
+				u32 idle_errs = 0;
+
+				/* clear previous idle error counts */
+				ret_val =
+				    e1000_read_phy_reg(hw, PHY_1000T_STATUS,
+						       &phy_data);
+				if (ret_val)
+					return ret_val;
+
+				for (i = 0; i < ffe_idle_err_timeout; i++) {
+					udelay(1000);
+					ret_val =
+					    e1000_read_phy_reg(hw,
+							       PHY_1000T_STATUS,
+							       &phy_data);
+					if (ret_val)
+						return ret_val;
+
+					idle_errs +=
+					    (phy_data &
+					     SR_1000T_IDLE_ERROR_CNT);
+					if (idle_errs >
+					    SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT)
+					{
+						hw->ffe_config_state =
+						    e1000_ffe_config_active;
+
+						ret_val =
+						    e1000_write_phy_reg(hw,
+									IGP01E1000_PHY_DSP_FFE,
+									IGP01E1000_PHY_DSP_FFE_CM_CP);
+						if (ret_val)
+							return ret_val;
+						break;
+					}
+
+					if (idle_errs)
+						ffe_idle_err_timeout =
+						    FFE_IDLE_ERR_COUNT_TIMEOUT_100;
+				}
+			}
+		}
+	} else {
+		if (hw->dsp_config_state == e1000_dsp_config_activated) {
+			/* Save off the current value of register 0x2F5B to be restored at
+			 * the end of the routines. */
+			ret_val =
+			    e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+			if (ret_val)
+				return ret_val;
+
+			/* Disable the PHY transmitter */
+			ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+			if (ret_val)
+				return ret_val;
+
+			mdelay(20);
+
+			ret_val = e1000_write_phy_reg(hw, 0x0000,
+						      IGP01E1000_IEEE_FORCE_GIGA);
+			if (ret_val)
+				return ret_val;
+			for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+				ret_val =
+				    e1000_read_phy_reg(hw, dsp_reg_array[i],
+						       &phy_data);
+				if (ret_val)
+					return ret_val;
+
+				phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
+				phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
+
+				ret_val =
+				    e1000_write_phy_reg(hw, dsp_reg_array[i],
+							phy_data);
+				if (ret_val)
+					return ret_val;
+			}
+
+			ret_val = e1000_write_phy_reg(hw, 0x0000,
+						      IGP01E1000_IEEE_RESTART_AUTONEG);
+			if (ret_val)
+				return ret_val;
+
+			mdelay(20);
+
+			/* Now enable the transmitter */
+			ret_val =
+			    e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+			if (ret_val)
+				return ret_val;
+
+			hw->dsp_config_state = e1000_dsp_config_enabled;
+		}
 
-    /* Set PHY register 30, page 5, bit 8 to 0 */
+		if (hw->ffe_config_state == e1000_ffe_config_active) {
+			/* Save off the current value of register 0x2F5B to be restored at
+			 * the end of the routines. */
+			ret_val =
+			    e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
 
-    ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
-    if (ret_val)
-        return ret_val;
+			if (ret_val)
+				return ret_val;
 
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
-    if (ret_val)
-        return ret_val;
+			/* Disable the PHY transmitter */
+			ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
 
-    ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
-    if (ret_val)
-        return ret_val;
+			if (ret_val)
+				return ret_val;
 
-    phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
-    if (ret_val)
-        return ret_val;
+			mdelay(20);
 
-    /* Set PHY register 30, page 4, bit 11 to 1 */
+			ret_val = e1000_write_phy_reg(hw, 0x0000,
+						      IGP01E1000_IEEE_FORCE_GIGA);
+			if (ret_val)
+				return ret_val;
+			ret_val =
+			    e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
+						IGP01E1000_PHY_DSP_FFE_DEFAULT);
+			if (ret_val)
+				return ret_val;
 
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
-    if (ret_val)
-        return ret_val;
+			ret_val = e1000_write_phy_reg(hw, 0x0000,
+						      IGP01E1000_IEEE_RESTART_AUTONEG);
+			if (ret_val)
+				return ret_val;
 
-    ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
-    if (ret_val)
-        return ret_val;
+			mdelay(20);
 
-    phy_data |= M88E1000_PHY_VCO_REG_BIT11;
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
-    if (ret_val)
-        return ret_val;
+			/* Now enable the transmitter */
+			ret_val =
+			    e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
 
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
-    if (ret_val)
-        return ret_val;
+			if (ret_val)
+				return ret_val;
 
-    return E1000_SUCCESS;
+			hw->ffe_config_state = e1000_ffe_config_enabled;
+		}
+	}
+	return E1000_SUCCESS;
 }
 
-
-/*****************************************************************************
- * This function reads the cookie from ARC ram.
+/**
+ * e1000_set_phy_mode - Set PHY to class A mode
+ * @hw: Struct containing variables accessed by shared code
  *
- * returns: - E1000_SUCCESS .
- ****************************************************************************/
-static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer)
+ * Assumes the following operations will follow to enable the new class mode.
+ *  1. Do a PHY soft reset
+ *  2. Restart auto-negotiation or force link.
+ */
+static s32 e1000_set_phy_mode(struct e1000_hw *hw)
 {
-    u8 i;
-    u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET;
-    u8 length = E1000_MNG_DHCP_COOKIE_LENGTH;
-
-    length = (length >> 2);
-    offset = (offset >> 2);
-
-    for (i = 0; i < length; i++) {
-        *((u32 *)buffer + i) =
-            E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i);
-    }
-    return E1000_SUCCESS;
-}
+	s32 ret_val;
+	u16 eeprom_data;
 
+	DEBUGFUNC("e1000_set_phy_mode");
 
-/*****************************************************************************
- * This function checks whether the HOST IF is enabled for command operaton
- * and also checks whether the previous command is completed.
- * It busy waits in case of previous command is not completed.
- *
- * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
- *            timeout
- *          - E1000_SUCCESS for success.
- ****************************************************************************/
-static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
-{
-    u32 hicr;
-    u8 i;
-
-    /* Check that the host interface is enabled. */
-    hicr = er32(HICR);
-    if ((hicr & E1000_HICR_EN) == 0) {
-        DEBUGOUT("E1000_HOST_EN bit disabled.\n");
-        return -E1000_ERR_HOST_INTERFACE_COMMAND;
-    }
-    /* check the previous command is completed */
-    for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
-        hicr = er32(HICR);
-        if (!(hicr & E1000_HICR_C))
-            break;
-        mdelay(1);
-    }
-
-    if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
-        DEBUGOUT("Previous command timeout failed .\n");
-        return -E1000_ERR_HOST_INTERFACE_COMMAND;
-    }
-    return E1000_SUCCESS;
-}
+	if ((hw->mac_type == e1000_82545_rev_3) &&
+	    (hw->media_type == e1000_media_type_copper)) {
+		ret_val =
+		    e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1,
+				      &eeprom_data);
+		if (ret_val) {
+			return ret_val;
+		}
 
-/*****************************************************************************
- * This function writes the buffer content at the offset given on the host if.
- * It also does alignment considerations to do the writes in most efficient way.
- * Also fills up the sum of the buffer in *buffer parameter.
- *
- * returns  - E1000_SUCCESS for success.
- ****************************************************************************/
-static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
-				   u16 offset, u8 *sum)
-{
-    u8 *tmp;
-    u8 *bufptr = buffer;
-    u32 data = 0;
-    u16 remaining, i, j, prev_bytes;
-
-    /* sum = only sum of the data and it is not checksum */
-
-    if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) {
-        return -E1000_ERR_PARAM;
-    }
-
-    tmp = (u8 *)&data;
-    prev_bytes = offset & 0x3;
-    offset &= 0xFFFC;
-    offset >>= 2;
-
-    if (prev_bytes) {
-        data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset);
-        for (j = prev_bytes; j < sizeof(u32); j++) {
-            *(tmp + j) = *bufptr++;
-            *sum += *(tmp + j);
-        }
-        E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data);
-        length -= j - prev_bytes;
-        offset++;
-    }
-
-    remaining = length & 0x3;
-    length -= remaining;
-
-    /* Calculate length in DWORDs */
-    length >>= 2;
-
-    /* The device driver writes the relevant command block into the
-     * ram area. */
-    for (i = 0; i < length; i++) {
-        for (j = 0; j < sizeof(u32); j++) {
-            *(tmp + j) = *bufptr++;
-            *sum += *(tmp + j);
-        }
-
-        E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
-    }
-    if (remaining) {
-        for (j = 0; j < sizeof(u32); j++) {
-            if (j < remaining)
-                *(tmp + j) = *bufptr++;
-            else
-                *(tmp + j) = 0;
-
-            *sum += *(tmp + j);
-        }
-        E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
-    }
-
-    return E1000_SUCCESS;
-}
+		if ((eeprom_data != EEPROM_RESERVED_WORD) &&
+		    (eeprom_data & EEPROM_PHY_CLASS_A)) {
+			ret_val =
+			    e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT,
+						0x000B);
+			if (ret_val)
+				return ret_val;
+			ret_val =
+			    e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL,
+						0x8104);
+			if (ret_val)
+				return ret_val;
+
+			hw->phy_reset_disable = false;
+		}
+	}
 
+	return E1000_SUCCESS;
+}
 
-/*****************************************************************************
- * This function writes the command header after does the checksum calculation.
+/**
+ * e1000_set_d3_lplu_state - set d3 link power state
+ * @hw: Struct containing variables accessed by shared code
+ * @active: true to enable lplu false to disable lplu.
+ *
+ * This function sets the lplu state according to the active flag.  When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisement
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
  *
- * returns  - E1000_SUCCESS for success.
- ****************************************************************************/
-static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
-				      struct e1000_host_mng_command_header *hdr)
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ *            E1000_SUCCESS at any other case.
+ */
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
 {
-    u16 i;
-    u8 sum;
-    u8 *buffer;
-
-    /* Write the whole command header structure which includes sum of
-     * the buffer */
-
-    u16 length = sizeof(struct e1000_host_mng_command_header);
+	s32 ret_val;
+	u16 phy_data;
+	DEBUGFUNC("e1000_set_d3_lplu_state");
+
+	if (hw->phy_type != e1000_phy_igp)
+		return E1000_SUCCESS;
+
+	/* During driver activity LPLU should not be used or it will attain link
+	 * from the lowest speeds starting from 10Mbps. The capability is used for
+	 * Dx transitions and states */
+	if (hw->mac_type == e1000_82541_rev_2
+	    || hw->mac_type == e1000_82547_rev_2) {
+		ret_val =
+		    e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
+		if (ret_val)
+			return ret_val;
+	}
 
-    sum = hdr->checksum;
-    hdr->checksum = 0;
+	if (!active) {
+		if (hw->mac_type == e1000_82541_rev_2 ||
+		    hw->mac_type == e1000_82547_rev_2) {
+			phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
+			ret_val =
+			    e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+						phy_data);
+			if (ret_val)
+				return ret_val;
+		}
 
-    buffer = (u8 *)hdr;
-    i = length;
-    while (i--)
-        sum += buffer[i];
+		/* LPLU and SmartSpeed are mutually exclusive.  LPLU is used during
+		 * Dx states where the power conservation is most important.  During
+		 * driver activity we should enable SmartSpeed, so performance is
+		 * maintained. */
+		if (hw->smart_speed == e1000_smart_speed_on) {
+			ret_val =
+			    e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					       &phy_data);
+			if (ret_val)
+				return ret_val;
+
+			phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val =
+			    e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+						phy_data);
+			if (ret_val)
+				return ret_val;
+		} else if (hw->smart_speed == e1000_smart_speed_off) {
+			ret_val =
+			    e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					       &phy_data);
+			if (ret_val)
+				return ret_val;
+
+			phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val =
+			    e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+						phy_data);
+			if (ret_val)
+				return ret_val;
+		}
+	} else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT)
+		   || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL)
+		   || (hw->autoneg_advertised ==
+		       AUTONEG_ADVERTISE_10_100_ALL)) {
+
+		if (hw->mac_type == e1000_82541_rev_2 ||
+		    hw->mac_type == e1000_82547_rev_2) {
+			phy_data |= IGP01E1000_GMII_FLEX_SPD;
+			ret_val =
+			    e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+						phy_data);
+			if (ret_val)
+				return ret_val;
+		}
 
-    hdr->checksum = 0 - sum;
+		/* When LPLU is enabled we should disable SmartSpeed */
+		ret_val =
+		    e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+				       &phy_data);
+		if (ret_val)
+			return ret_val;
 
-    length >>= 2;
-    /* The device driver writes the relevant command block into the ram area. */
-    for (i = 0; i < length; i++) {
-        E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *)hdr + i));
-        E1000_WRITE_FLUSH();
-    }
+		phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val =
+		    e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					phy_data);
+		if (ret_val)
+			return ret_val;
 
-    return E1000_SUCCESS;
+	}
+	return E1000_SUCCESS;
 }
 
-
-/*****************************************************************************
- * This function indicates to ARC that a new command is pending which completes
- * one write operation by the driver.
+/**
+ * e1000_set_vco_speed
+ * @hw: Struct containing variables accessed by shared code
  *
- * returns  - E1000_SUCCESS for success.
- ****************************************************************************/
-static s32 e1000_mng_write_commit(struct e1000_hw *hw)
+ * Change VCO speed register to improve Bit Error Rate performance of SERDES.
+ */
+static s32 e1000_set_vco_speed(struct e1000_hw *hw)
 {
-    u32 hicr;
+	s32 ret_val;
+	u16 default_page = 0;
+	u16 phy_data;
 
-    hicr = er32(HICR);
-    /* Setting this bit tells the ARC that a new command is pending. */
-    ew32(HICR, hicr | E1000_HICR_C);
+	DEBUGFUNC("e1000_set_vco_speed");
 
-    return E1000_SUCCESS;
-}
+	switch (hw->mac_type) {
+	case e1000_82545_rev_3:
+	case e1000_82546_rev_3:
+		break;
+	default:
+		return E1000_SUCCESS;
+	}
 
+	/* Set PHY register 30, page 5, bit 8 to 0 */
 
-/*****************************************************************************
- * This function checks the mode of the firmware.
- *
- * returns  - true when the mode is IAMT or false.
- ****************************************************************************/
-bool e1000_check_mng_mode(struct e1000_hw *hw)
-{
-    u32 fwsm;
-
-    fwsm = er32(FWSM);
+	ret_val =
+	    e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
+	if (ret_val)
+		return ret_val;
 
-    if (hw->mac_type == e1000_ich8lan) {
-        if ((fwsm & E1000_FWSM_MODE_MASK) ==
-            (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
-            return true;
-    } else if ((fwsm & E1000_FWSM_MODE_MASK) ==
-               (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
-        return true;
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
+	if (ret_val)
+		return ret_val;
 
-    return false;
-}
+	ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+	if (ret_val)
+		return ret_val;
 
+	phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+	if (ret_val)
+		return ret_val;
 
-/*****************************************************************************
- * This function writes the dhcp info .
- ****************************************************************************/
-s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
-{
-    s32 ret_val;
-    struct e1000_host_mng_command_header hdr;
-
-    hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
-    hdr.command_length = length;
-    hdr.reserved1 = 0;
-    hdr.reserved2 = 0;
-    hdr.checksum = 0;
-
-    ret_val = e1000_mng_enable_host_if(hw);
-    if (ret_val == E1000_SUCCESS) {
-        ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr),
-                                          &(hdr.checksum));
-        if (ret_val == E1000_SUCCESS) {
-            ret_val = e1000_mng_write_cmd_header(hw, &hdr);
-            if (ret_val == E1000_SUCCESS)
-                ret_val = e1000_mng_write_commit(hw);
-        }
-    }
-    return ret_val;
-}
+	/* Set PHY register 30, page 4, bit 11 to 1 */
 
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
+	if (ret_val)
+		return ret_val;
 
-/*****************************************************************************
- * This function calculates the checksum.
- *
- * returns  - checksum of buffer contents.
- ****************************************************************************/
-static u8 e1000_calculate_mng_checksum(char *buffer, u32 length)
-{
-    u8 sum = 0;
-    u32 i;
+	ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+	if (ret_val)
+		return ret_val;
 
-    if (!buffer)
-        return 0;
+	phy_data |= M88E1000_PHY_VCO_REG_BIT11;
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+	if (ret_val)
+		return ret_val;
 
-    for (i=0; i < length; i++)
-        sum += buffer[i];
+	ret_val =
+	    e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
+	if (ret_val)
+		return ret_val;
 
-    return (u8)(0 - sum);
+	return E1000_SUCCESS;
 }
 
-/*****************************************************************************
- * This function checks whether tx pkt filtering needs to be enabled or not.
- *
- * returns  - true for packet filtering or false.
- ****************************************************************************/
-bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
-{
-    /* called in init as well as watchdog timer functions */
-
-    s32 ret_val, checksum;
-    bool tx_filter = false;
-    struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie);
-    u8 *buffer = (u8 *) &(hw->mng_cookie);
-
-    if (e1000_check_mng_mode(hw)) {
-        ret_val = e1000_mng_enable_host_if(hw);
-        if (ret_val == E1000_SUCCESS) {
-            ret_val = e1000_host_if_read_cookie(hw, buffer);
-            if (ret_val == E1000_SUCCESS) {
-                checksum = hdr->checksum;
-                hdr->checksum = 0;
-                if ((hdr->signature == E1000_IAMT_SIGNATURE) &&
-                    checksum == e1000_calculate_mng_checksum((char *)buffer,
-                                               E1000_MNG_DHCP_COOKIE_LENGTH)) {
-                    if (hdr->status &
-                        E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT)
-                        tx_filter = true;
-                } else
-                    tx_filter = true;
-            } else
-                tx_filter = true;
-        }
-    }
-
-    hw->tx_pkt_filtering = tx_filter;
-    return tx_filter;
-}
 
-/******************************************************************************
- * Verifies the hardware needs to allow ARPs to be processed by the host
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_enable_mng_pass_thru - check for bmc pass through
+ * @hw: Struct containing variables accessed by shared code
  *
+ * Verifies the hardware needs to allow ARPs to be processed by the host
  * returns: - true/false
- *
- *****************************************************************************/
+ */
 u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
 {
-    u32 manc;
-    u32 fwsm, factps;
-
-    if (hw->asf_firmware_present) {
-        manc = er32(MANC);
-
-        if (!(manc & E1000_MANC_RCV_TCO_EN) ||
-            !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
-            return false;
-        if (e1000_arc_subsystem_valid(hw)) {
-            fwsm = er32(FWSM);
-            factps = er32(FACTPS);
-
-            if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) ==
-                   e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG))
-                return true;
-        } else
-            if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
-                return true;
-    }
-    return false;
-}
+	u32 manc;
 
-static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
-{
-    s32 ret_val;
-    u16 mii_status_reg;
-    u16 i;
-
-    /* Polarity reversal workaround for forced 10F/10H links. */
-
-    /* Disable the transmitter on the PHY */
-
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
-    if (ret_val)
-        return ret_val;
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
-    if (ret_val)
-        return ret_val;
-
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
-    if (ret_val)
-        return ret_val;
-
-    /* This loop will early-out if the NO link condition has been met. */
-    for (i = PHY_FORCE_TIME; i > 0; i--) {
-        /* Read the MII Status Register and wait for Link Status bit
-         * to be clear.
-         */
-
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if (ret_val)
-            return ret_val;
-
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if (ret_val)
-            return ret_val;
-
-        if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break;
-        mdelay(100);
-    }
-
-    /* Recommended delay time after link has been lost */
-    mdelay(1000);
-
-    /* Now we will re-enable th transmitter on the PHY */
-
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
-    if (ret_val)
-        return ret_val;
-    mdelay(50);
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
-    if (ret_val)
-        return ret_val;
-    mdelay(50);
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
-    if (ret_val)
-        return ret_val;
-    mdelay(50);
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
-    if (ret_val)
-        return ret_val;
-
-    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
-    if (ret_val)
-        return ret_val;
-
-    /* This loop will early-out if the link condition has been met. */
-    for (i = PHY_FORCE_TIME; i > 0; i--) {
-        /* Read the MII Status Register and wait for Link Status bit
-         * to be set.
-         */
-
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if (ret_val)
-            return ret_val;
-
-        ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if (ret_val)
-            return ret_val;
-
-        if (mii_status_reg & MII_SR_LINK_STATUS) break;
-        mdelay(100);
-    }
-    return E1000_SUCCESS;
+	if (hw->asf_firmware_present) {
+		manc = er32(MANC);
+
+		if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+		    !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+			return false;
+		if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
+			return true;
+	}
+	return false;
 }
 
-/***************************************************************************
- *
- * Disables PCI-Express master access.
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - none.
- *
- ***************************************************************************/
-static void e1000_set_pci_express_master_disable(struct e1000_hw *hw)
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
 {
-    u32 ctrl;
+	s32 ret_val;
+	u16 mii_status_reg;
+	u16 i;
 
-    DEBUGFUNC("e1000_set_pci_express_master_disable");
+	/* Polarity reversal workaround for forced 10F/10H links. */
 
-    if (hw->bus_type != e1000_bus_type_pci_express)
-        return;
+	/* Disable the transmitter on the PHY */
 
-    ctrl = er32(CTRL);
-    ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
-    ew32(CTRL, ctrl);
-}
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+	if (ret_val)
+		return ret_val;
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
+	if (ret_val)
+		return ret_val;
 
-/*******************************************************************************
- *
- * Disables PCI-Express master access and verifies there are no pending requests
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't
- *            caused the master requests to be disabled.
- *            E1000_SUCCESS master requests disabled.
- *
- ******************************************************************************/
-s32 e1000_disable_pciex_master(struct e1000_hw *hw)
-{
-    s32 timeout = MASTER_DISABLE_TIMEOUT;   /* 80ms */
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+	if (ret_val)
+		return ret_val;
 
-    DEBUGFUNC("e1000_disable_pciex_master");
+	/* This loop will early-out if the NO link condition has been met. */
+	for (i = PHY_FORCE_TIME; i > 0; i--) {
+		/* Read the MII Status Register and wait for Link Status bit
+		 * to be clear.
+		 */
 
-    if (hw->bus_type != e1000_bus_type_pci_express)
-        return E1000_SUCCESS;
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
 
-    e1000_set_pci_express_master_disable(hw);
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
 
-    while (timeout) {
-        if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
-            break;
-        else
-            udelay(100);
-        timeout--;
-    }
-
-    if (!timeout) {
-        DEBUGOUT("Master requests are pending.\n");
-        return -E1000_ERR_MASTER_REQUESTS_PENDING;
-    }
+		if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0)
+			break;
+		mdelay(100);
+	}
 
-    return E1000_SUCCESS;
+	/* Recommended delay time after link has been lost */
+	mdelay(1000);
+
+	/* Now we will re-enable th transmitter on the PHY */
+
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+	if (ret_val)
+		return ret_val;
+	mdelay(50);
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
+	if (ret_val)
+		return ret_val;
+	mdelay(50);
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
+	if (ret_val)
+		return ret_val;
+	mdelay(50);
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+	if (ret_val)
+		return ret_val;
+
+	/* This loop will early-out if the link condition has been met. */
+	for (i = PHY_FORCE_TIME; i > 0; i--) {
+		/* Read the MII Status Register and wait for Link Status bit
+		 * to be set.
+		 */
+
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+
+		if (mii_status_reg & MII_SR_LINK_STATUS)
+			break;
+		mdelay(100);
+	}
+	return E1000_SUCCESS;
 }
 
-/*******************************************************************************
+/**
+ * e1000_get_auto_rd_done
+ * @hw: Struct containing variables accessed by shared code
  *
  * Check for EEPROM Auto Read bit done.
- *
- * hw: Struct containing variables accessed by shared code
- *
  * returns: - E1000_ERR_RESET if fail to reset MAC
  *            E1000_SUCCESS at any other case.
- *
- ******************************************************************************/
+ */
 static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
 {
-    s32 timeout = AUTO_READ_DONE_TIMEOUT;
-
-    DEBUGFUNC("e1000_get_auto_rd_done");
-
-    switch (hw->mac_type) {
-    default:
-        msleep(5);
-        break;
-    case e1000_82571:
-    case e1000_82572:
-    case e1000_82573:
-    case e1000_80003es2lan:
-    case e1000_ich8lan:
-        while (timeout) {
-            if (er32(EECD) & E1000_EECD_AUTO_RD)
-                break;
-            else msleep(1);
-            timeout--;
-        }
-
-        if (!timeout) {
-            DEBUGOUT("Auto read by HW from EEPROM has not completed.\n");
-            return -E1000_ERR_RESET;
-        }
-        break;
-    }
-
-    /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high.
-     * Need to wait for PHY configuration completion before accessing NVM
-     * and PHY. */
-    if (hw->mac_type == e1000_82573)
-        msleep(25);
-
-    return E1000_SUCCESS;
+	DEBUGFUNC("e1000_get_auto_rd_done");
+	msleep(5);
+	return E1000_SUCCESS;
 }
 
-/***************************************************************************
- * Checks if the PHY configuration is done
- *
- * hw: Struct containing variables accessed by shared code
+/**
+ * e1000_get_phy_cfg_done
+ * @hw: Struct containing variables accessed by shared code
  *
+ * Checks if the PHY configuration is done
  * returns: - E1000_ERR_RESET if fail to reset MAC
  *            E1000_SUCCESS at any other case.
- *
- ***************************************************************************/
+ */
 static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
 {
-    s32 timeout = PHY_CFG_TIMEOUT;
-    u32 cfg_mask = E1000_EEPROM_CFG_DONE;
-
-    DEBUGFUNC("e1000_get_phy_cfg_done");
-
-    switch (hw->mac_type) {
-    default:
-        mdelay(10);
-        break;
-    case e1000_80003es2lan:
-        /* Separate *_CFG_DONE_* bit for each port */
-        if (er32(STATUS) & E1000_STATUS_FUNC_1)
-            cfg_mask = E1000_EEPROM_CFG_DONE_PORT_1;
-        /* Fall Through */
-    case e1000_82571:
-    case e1000_82572:
-        while (timeout) {
-            if (er32(EEMNGCTL) & cfg_mask)
-                break;
-            else
-                msleep(1);
-            timeout--;
-        }
-        if (!timeout) {
-            DEBUGOUT("MNG configuration cycle has not completed.\n");
-            return -E1000_ERR_RESET;
-        }
-        break;
-    }
-
-    return E1000_SUCCESS;
-}
-
-/***************************************************************************
- *
- * Using the combination of SMBI and SWESMBI semaphore bits when resetting
- * adapter or Eeprom access.
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - E1000_ERR_EEPROM if fail to access EEPROM.
- *            E1000_SUCCESS at any other case.
- *
- ***************************************************************************/
-static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
-{
-    s32 timeout;
-    u32 swsm;
-
-    DEBUGFUNC("e1000_get_hw_eeprom_semaphore");
-
-    if (!hw->eeprom_semaphore_present)
-        return E1000_SUCCESS;
-
-    if (hw->mac_type == e1000_80003es2lan) {
-        /* Get the SW semaphore. */
-        if (e1000_get_software_semaphore(hw) != E1000_SUCCESS)
-            return -E1000_ERR_EEPROM;
-    }
-
-    /* Get the FW semaphore. */
-    timeout = hw->eeprom.word_size + 1;
-    while (timeout) {
-        swsm = er32(SWSM);
-        swsm |= E1000_SWSM_SWESMBI;
-        ew32(SWSM, swsm);
-        /* if we managed to set the bit we got the semaphore. */
-        swsm = er32(SWSM);
-        if (swsm & E1000_SWSM_SWESMBI)
-            break;
-
-        udelay(50);
-        timeout--;
-    }
-
-    if (!timeout) {
-        /* Release semaphores */
-        e1000_put_hw_eeprom_semaphore(hw);
-        DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n");
-        return -E1000_ERR_EEPROM;
-    }
-
-    return E1000_SUCCESS;
-}
-
-/***************************************************************************
- * This function clears HW semaphore bits.
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - None.
- *
- ***************************************************************************/
-static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
-{
-    u32 swsm;
-
-    DEBUGFUNC("e1000_put_hw_eeprom_semaphore");
-
-    if (!hw->eeprom_semaphore_present)
-        return;
-
-    swsm = er32(SWSM);
-    if (hw->mac_type == e1000_80003es2lan) {
-        /* Release both semaphores. */
-        swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
-    } else
-        swsm &= ~(E1000_SWSM_SWESMBI);
-    ew32(SWSM, swsm);
-}
-
-/***************************************************************************
- *
- * Obtaining software semaphore bit (SMBI) before resetting PHY.
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - E1000_ERR_RESET if fail to obtain semaphore.
- *            E1000_SUCCESS at any other case.
- *
- ***************************************************************************/
-static s32 e1000_get_software_semaphore(struct e1000_hw *hw)
-{
-    s32 timeout = hw->eeprom.word_size + 1;
-    u32 swsm;
-
-    DEBUGFUNC("e1000_get_software_semaphore");
-
-    if (hw->mac_type != e1000_80003es2lan) {
-        return E1000_SUCCESS;
-    }
-
-    while (timeout) {
-        swsm = er32(SWSM);
-        /* If SMBI bit cleared, it is now set and we hold the semaphore */
-        if (!(swsm & E1000_SWSM_SMBI))
-            break;
-        mdelay(1);
-        timeout--;
-    }
-
-    if (!timeout) {
-        DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
-        return -E1000_ERR_RESET;
-    }
-
-    return E1000_SUCCESS;
-}
-
-/***************************************************************************
- *
- * Release semaphore bit (SMBI).
- *
- * hw: Struct containing variables accessed by shared code
- *
- ***************************************************************************/
-static void e1000_release_software_semaphore(struct e1000_hw *hw)
-{
-    u32 swsm;
-
-    DEBUGFUNC("e1000_release_software_semaphore");
-
-    if (hw->mac_type != e1000_80003es2lan) {
-        return;
-    }
-
-    swsm = er32(SWSM);
-    /* Release the SW semaphores.*/
-    swsm &= ~E1000_SWSM_SMBI;
-    ew32(SWSM, swsm);
-}
-
-/******************************************************************************
- * Checks if PHY reset is blocked due to SOL/IDER session, for example.
- * Returning E1000_BLK_PHY_RESET isn't necessarily an error.  But it's up to
- * the caller to figure out how to deal with it.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * returns: - E1000_BLK_PHY_RESET
- *            E1000_SUCCESS
- *
- *****************************************************************************/
-s32 e1000_check_phy_reset_block(struct e1000_hw *hw)
-{
-    u32 manc = 0;
-    u32 fwsm = 0;
-
-    if (hw->mac_type == e1000_ich8lan) {
-        fwsm = er32(FWSM);
-        return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS
-                                            : E1000_BLK_PHY_RESET;
-    }
-
-    if (hw->mac_type > e1000_82547_rev_2)
-        manc = er32(MANC);
-    return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
-        E1000_BLK_PHY_RESET : E1000_SUCCESS;
-}
-
-static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw)
-{
-    u32 fwsm;
-
-    /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC
-     * may not be provided a DMA clock when no manageability features are
-     * enabled.  We do not want to perform any reads/writes to these registers
-     * if this is the case.  We read FWSM to determine the manageability mode.
-     */
-    switch (hw->mac_type) {
-    case e1000_82571:
-    case e1000_82572:
-    case e1000_82573:
-    case e1000_80003es2lan:
-        fwsm = er32(FWSM);
-        if ((fwsm & E1000_FWSM_MODE_MASK) != 0)
-            return true;
-        break;
-    case e1000_ich8lan:
-        return true;
-    default:
-        break;
-    }
-    return false;
-}
-
-
-/******************************************************************************
- * Configure PCI-Ex no-snoop
- *
- * hw - Struct containing variables accessed by shared code.
- * no_snoop - Bitmap of no-snoop events.
- *
- * returns: E1000_SUCCESS
- *
- *****************************************************************************/
-static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
-{
-    u32 gcr_reg = 0;
-
-    DEBUGFUNC("e1000_set_pci_ex_no_snoop");
-
-    if (hw->bus_type == e1000_bus_type_unknown)
-        e1000_get_bus_info(hw);
-
-    if (hw->bus_type != e1000_bus_type_pci_express)
-        return E1000_SUCCESS;
-
-    if (no_snoop) {
-        gcr_reg = er32(GCR);
-        gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL);
-        gcr_reg |= no_snoop;
-        ew32(GCR, gcr_reg);
-    }
-    if (hw->mac_type == e1000_ich8lan) {
-        u32 ctrl_ext;
-
-        ew32(GCR, PCI_EX_82566_SNOOP_ALL);
-
-        ctrl_ext = er32(CTRL_EXT);
-        ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
-        ew32(CTRL_EXT, ctrl_ext);
-    }
-
-    return E1000_SUCCESS;
-}
-
-/***************************************************************************
- *
- * Get software semaphore FLAG bit (SWFLAG).
- * SWFLAG is used to synchronize the access to all shared resource between
- * SW, FW and HW.
- *
- * hw: Struct containing variables accessed by shared code
- *
- ***************************************************************************/
-static s32 e1000_get_software_flag(struct e1000_hw *hw)
-{
-    s32 timeout = PHY_CFG_TIMEOUT;
-    u32 extcnf_ctrl;
-
-    DEBUGFUNC("e1000_get_software_flag");
-
-    if (hw->mac_type == e1000_ich8lan) {
-        while (timeout) {
-            extcnf_ctrl = er32(EXTCNF_CTRL);
-            extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
-            ew32(EXTCNF_CTRL, extcnf_ctrl);
-
-            extcnf_ctrl = er32(EXTCNF_CTRL);
-            if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
-                break;
-            mdelay(1);
-            timeout--;
-        }
-
-        if (!timeout) {
-            DEBUGOUT("FW or HW locks the resource too long.\n");
-            return -E1000_ERR_CONFIG;
-        }
-    }
-
-    return E1000_SUCCESS;
-}
-
-/***************************************************************************
- *
- * Release software semaphore FLAG bit (SWFLAG).
- * SWFLAG is used to synchronize the access to all shared resource between
- * SW, FW and HW.
- *
- * hw: Struct containing variables accessed by shared code
- *
- ***************************************************************************/
-static void e1000_release_software_flag(struct e1000_hw *hw)
-{
-    u32 extcnf_ctrl;
-
-    DEBUGFUNC("e1000_release_software_flag");
-
-    if (hw->mac_type == e1000_ich8lan) {
-        extcnf_ctrl= er32(EXTCNF_CTRL);
-        extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
-        ew32(EXTCNF_CTRL, extcnf_ctrl);
-    }
-
-    return;
-}
-
-/******************************************************************************
- * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
- * register.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
-				  u16 *data)
-{
-    s32  error = E1000_SUCCESS;
-    u32 flash_bank = 0;
-    u32 act_offset = 0;
-    u32 bank_offset = 0;
-    u16 word = 0;
-    u16 i = 0;
-
-    /* We need to know which is the valid flash bank.  In the event
-     * that we didn't allocate eeprom_shadow_ram, we may not be
-     * managing flash_bank.  So it cannot be trusted and needs
-     * to be updated with each read.
-     */
-    /* Value of bit 22 corresponds to the flash bank we're on. */
-    flash_bank = (er32(EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
-
-    /* Adjust offset appropriately if we're on bank 1 - adjust for word size */
-    bank_offset = flash_bank * (hw->flash_bank_size * 2);
-
-    error = e1000_get_software_flag(hw);
-    if (error != E1000_SUCCESS)
-        return error;
-
-    for (i = 0; i < words; i++) {
-        if (hw->eeprom_shadow_ram != NULL &&
-            hw->eeprom_shadow_ram[offset+i].modified) {
-            data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word;
-        } else {
-            /* The NVM part needs a byte offset, hence * 2 */
-            act_offset = bank_offset + ((offset + i) * 2);
-            error = e1000_read_ich8_word(hw, act_offset, &word);
-            if (error != E1000_SUCCESS)
-                break;
-            data[i] = word;
-        }
-    }
-
-    e1000_release_software_flag(hw);
-
-    return error;
-}
-
-/******************************************************************************
- * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access
- * register.  Actually, writes are written to the shadow ram cache in the hw
- * structure hw->e1000_shadow_ram.  e1000_commit_shadow_ram flushes this to
- * the NVM, which occurs when the NVM checksum is updated.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of word in the EEPROM to write
- * words - number of words to write
- * data - words to write to the EEPROM
- *****************************************************************************/
-static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
-				   u16 *data)
-{
-    u32 i = 0;
-    s32 error = E1000_SUCCESS;
-
-    error = e1000_get_software_flag(hw);
-    if (error != E1000_SUCCESS)
-        return error;
-
-    /* A driver can write to the NVM only if it has eeprom_shadow_ram
-     * allocated.  Subsequent reads to the modified words are read from
-     * this cached structure as well.  Writes will only go into this
-     * cached structure unless it's followed by a call to
-     * e1000_update_eeprom_checksum() where it will commit the changes
-     * and clear the "modified" field.
-     */
-    if (hw->eeprom_shadow_ram != NULL) {
-        for (i = 0; i < words; i++) {
-            if ((offset + i) < E1000_SHADOW_RAM_WORDS) {
-                hw->eeprom_shadow_ram[offset+i].modified = true;
-                hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i];
-            } else {
-                error = -E1000_ERR_EEPROM;
-                break;
-            }
-        }
-    } else {
-        /* Drivers have the option to not allocate eeprom_shadow_ram as long
-         * as they don't perform any NVM writes.  An attempt in doing so
-         * will result in this error.
-         */
-        error = -E1000_ERR_EEPROM;
-    }
-
-    e1000_release_software_flag(hw);
-
-    return error;
-}
-
-/******************************************************************************
- * This function does initial flash setup so that a new read/write/erase cycle
- * can be started.
- *
- * hw - The pointer to the hw structure
- ****************************************************************************/
-static s32 e1000_ich8_cycle_init(struct e1000_hw *hw)
-{
-    union ich8_hws_flash_status hsfsts;
-    s32 error = E1000_ERR_EEPROM;
-    s32 i     = 0;
-
-    DEBUGFUNC("e1000_ich8_cycle_init");
-
-    hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-
-    /* May be check the Flash Des Valid bit in Hw status */
-    if (hsfsts.hsf_status.fldesvalid == 0) {
-        DEBUGOUT("Flash descriptor invalid.  SW Sequencing must be used.");
-        return error;
-    }
-
-    /* Clear FCERR in Hw status by writing 1 */
-    /* Clear DAEL in Hw status by writing a 1 */
-    hsfsts.hsf_status.flcerr = 1;
-    hsfsts.hsf_status.dael = 1;
-
-    E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
-
-    /* Either we should have a hardware SPI cycle in progress bit to check
-     * against, in order to start a new cycle or FDONE bit should be changed
-     * in the hardware so that it is 1 after harware reset, which can then be
-     * used as an indication whether a cycle is in progress or has been
-     * completed .. we should also have some software semaphore mechanism to
-     * guard FDONE or the cycle in progress bit so that two threads access to
-     * those bits can be sequentiallized or a way so that 2 threads dont
-     * start the cycle at the same time */
-
-    if (hsfsts.hsf_status.flcinprog == 0) {
-        /* There is no cycle running at present, so we can start a cycle */
-        /* Begin by setting Flash Cycle Done. */
-        hsfsts.hsf_status.flcdone = 1;
-        E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
-        error = E1000_SUCCESS;
-    } else {
-        /* otherwise poll for sometime so the current cycle has a chance
-         * to end before giving up. */
-        for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) {
-            hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-            if (hsfsts.hsf_status.flcinprog == 0) {
-                error = E1000_SUCCESS;
-                break;
-            }
-            udelay(1);
-        }
-        if (error == E1000_SUCCESS) {
-            /* Successful in waiting for previous cycle to timeout,
-             * now set the Flash Cycle Done. */
-            hsfsts.hsf_status.flcdone = 1;
-            E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
-        } else {
-            DEBUGOUT("Flash controller busy, cannot get access");
-        }
-    }
-    return error;
-}
-
-/******************************************************************************
- * This function starts a flash cycle and waits for its completion
- *
- * hw - The pointer to the hw structure
- ****************************************************************************/
-static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout)
-{
-    union ich8_hws_flash_ctrl hsflctl;
-    union ich8_hws_flash_status hsfsts;
-    s32 error = E1000_ERR_EEPROM;
-    u32 i = 0;
-
-    /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
-    hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
-    hsflctl.hsf_ctrl.flcgo = 1;
-    E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
-
-    /* wait till FDONE bit is set to 1 */
-    do {
-        hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-        if (hsfsts.hsf_status.flcdone == 1)
-            break;
-        udelay(1);
-        i++;
-    } while (i < timeout);
-    if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) {
-        error = E1000_SUCCESS;
-    }
-    return error;
-}
-
-/******************************************************************************
- * Reads a byte or word from the NVM using the ICH8 flash access registers.
- *
- * hw - The pointer to the hw structure
- * index - The index of the byte or word to read.
- * size - Size of data to read, 1=byte 2=word
- * data - Pointer to the word to store the value read.
- *****************************************************************************/
-static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
-				u16 *data)
-{
-    union ich8_hws_flash_status hsfsts;
-    union ich8_hws_flash_ctrl hsflctl;
-    u32 flash_linear_address;
-    u32 flash_data = 0;
-    s32 error = -E1000_ERR_EEPROM;
-    s32 count = 0;
-
-    DEBUGFUNC("e1000_read_ich8_data");
-
-    if (size < 1  || size > 2 || data == NULL ||
-        index > ICH_FLASH_LINEAR_ADDR_MASK)
-        return error;
-
-    flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
-                           hw->flash_base_addr;
-
-    do {
-        udelay(1);
-        /* Steps */
-        error = e1000_ich8_cycle_init(hw);
-        if (error != E1000_SUCCESS)
-            break;
-
-        hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
-        /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
-        hsflctl.hsf_ctrl.fldbcount = size - 1;
-        hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
-        E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
-
-        /* Write the last 24 bits of index into Flash Linear address field in
-         * Flash Address */
-        /* TODO: TBD maybe check the index against the size of flash */
-
-        E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
-
-        error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
-
-        /* Check if FCERR is set to 1, if set to 1, clear it and try the whole
-         * sequence a few more times, else read in (shift in) the Flash Data0,
-         * the order is least significant byte first msb to lsb */
-        if (error == E1000_SUCCESS) {
-            flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0);
-            if (size == 1) {
-                *data = (u8)(flash_data & 0x000000FF);
-            } else if (size == 2) {
-                *data = (u16)(flash_data & 0x0000FFFF);
-            }
-            break;
-        } else {
-            /* If we've gotten here, then things are probably completely hosed,
-             * but if the error condition is detected, it won't hurt to give
-             * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
-             */
-            hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-            if (hsfsts.hsf_status.flcerr == 1) {
-                /* Repeat for some time before giving up. */
-                continue;
-            } else if (hsfsts.hsf_status.flcdone == 0) {
-                DEBUGOUT("Timeout error - flash cycle did not complete.");
-                break;
-            }
-        }
-    } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
-
-    return error;
-}
-
-/******************************************************************************
- * Writes One /two bytes to the NVM using the ICH8 flash access registers.
- *
- * hw - The pointer to the hw structure
- * index - The index of the byte/word to read.
- * size - Size of data to read, 1=byte 2=word
- * data - The byte(s) to write to the NVM.
- *****************************************************************************/
-static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
-				 u16 data)
-{
-    union ich8_hws_flash_status hsfsts;
-    union ich8_hws_flash_ctrl hsflctl;
-    u32 flash_linear_address;
-    u32 flash_data = 0;
-    s32 error = -E1000_ERR_EEPROM;
-    s32 count = 0;
-
-    DEBUGFUNC("e1000_write_ich8_data");
-
-    if (size < 1  || size > 2 || data > size * 0xff ||
-        index > ICH_FLASH_LINEAR_ADDR_MASK)
-        return error;
-
-    flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
-                           hw->flash_base_addr;
-
-    do {
-        udelay(1);
-        /* Steps */
-        error = e1000_ich8_cycle_init(hw);
-        if (error != E1000_SUCCESS)
-            break;
-
-        hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
-        /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
-        hsflctl.hsf_ctrl.fldbcount = size -1;
-        hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
-        E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
-
-        /* Write the last 24 bits of index into Flash Linear address field in
-         * Flash Address */
-        E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
-
-        if (size == 1)
-            flash_data = (u32)data & 0x00FF;
-        else
-            flash_data = (u32)data;
-
-        E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data);
-
-        /* check if FCERR is set to 1 , if set to 1, clear it and try the whole
-         * sequence a few more times else done */
-        error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
-        if (error == E1000_SUCCESS) {
-            break;
-        } else {
-            /* If we're here, then things are most likely completely hosed,
-             * but if the error condition is detected, it won't hurt to give
-             * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
-             */
-            hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-            if (hsfsts.hsf_status.flcerr == 1) {
-                /* Repeat for some time before giving up. */
-                continue;
-            } else if (hsfsts.hsf_status.flcdone == 0) {
-                DEBUGOUT("Timeout error - flash cycle did not complete.");
-                break;
-            }
-        }
-    } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
-
-    return error;
-}
-
-/******************************************************************************
- * Reads a single byte from the NVM using the ICH8 flash access registers.
- *
- * hw - pointer to e1000_hw structure
- * index - The index of the byte to read.
- * data - Pointer to a byte to store the value read.
- *****************************************************************************/
-static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data)
-{
-    s32 status = E1000_SUCCESS;
-    u16 word = 0;
-
-    status = e1000_read_ich8_data(hw, index, 1, &word);
-    if (status == E1000_SUCCESS) {
-        *data = (u8)word;
-    }
-
-    return status;
-}
-
-/******************************************************************************
- * Writes a single byte to the NVM using the ICH8 flash access registers.
- * Performs verification by reading back the value and then going through
- * a retry algorithm before giving up.
- *
- * hw - pointer to e1000_hw structure
- * index - The index of the byte to write.
- * byte - The byte to write to the NVM.
- *****************************************************************************/
-static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte)
-{
-    s32 error = E1000_SUCCESS;
-    s32 program_retries = 0;
-
-    DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index);
-
-    error = e1000_write_ich8_byte(hw, index, byte);
-
-    if (error != E1000_SUCCESS) {
-        for (program_retries = 0; program_retries < 100; program_retries++) {
-            DEBUGOUT2("Retrying \t Byte := %2.2X Offset := %d\n", byte, index);
-            error = e1000_write_ich8_byte(hw, index, byte);
-            udelay(100);
-            if (error == E1000_SUCCESS)
-                break;
-        }
-    }
-
-    if (program_retries == 100)
-        error = E1000_ERR_EEPROM;
-
-    return error;
-}
-
-/******************************************************************************
- * Writes a single byte to the NVM using the ICH8 flash access registers.
- *
- * hw - pointer to e1000_hw structure
- * index - The index of the byte to read.
- * data - The byte to write to the NVM.
- *****************************************************************************/
-static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data)
-{
-    s32 status = E1000_SUCCESS;
-    u16 word = (u16)data;
-
-    status = e1000_write_ich8_data(hw, index, 1, word);
-
-    return status;
-}
-
-/******************************************************************************
- * Reads a word from the NVM using the ICH8 flash access registers.
- *
- * hw - pointer to e1000_hw structure
- * index - The starting byte index of the word to read.
- * data - Pointer to a word to store the value read.
- *****************************************************************************/
-static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data)
-{
-    s32 status = E1000_SUCCESS;
-    status = e1000_read_ich8_data(hw, index, 2, data);
-    return status;
-}
-
-/******************************************************************************
- * Erases the bank specified. Each bank may be a 4, 8 or 64k block. Banks are 0
- * based.
- *
- * hw - pointer to e1000_hw structure
- * bank - 0 for first bank, 1 for second bank
- *
- * Note that this function may actually erase as much as 8 or 64 KBytes.  The
- * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
- * bank size may be 4, 8 or 64 KBytes
- *****************************************************************************/
-static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank)
-{
-    union ich8_hws_flash_status hsfsts;
-    union ich8_hws_flash_ctrl hsflctl;
-    u32 flash_linear_address;
-    s32  count = 0;
-    s32  error = E1000_ERR_EEPROM;
-    s32  iteration;
-    s32  sub_sector_size = 0;
-    s32  bank_size;
-    s32  j = 0;
-    s32  error_flag = 0;
-
-    hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-
-    /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */
-    /* 00: The Hw sector is 256 bytes, hence we need to erase 16
-     *     consecutive sectors.  The start index for the nth Hw sector can be
-     *     calculated as bank * 4096 + n * 256
-     * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
-     *     The start index for the nth Hw sector can be calculated
-     *     as bank * 4096
-     * 10: The HW sector is 8K bytes
-     * 11: The Hw sector size is 64K bytes */
-    if (hsfsts.hsf_status.berasesz == 0x0) {
-        /* Hw sector size 256 */
-        sub_sector_size = ICH_FLASH_SEG_SIZE_256;
-        bank_size = ICH_FLASH_SECTOR_SIZE;
-        iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256;
-    } else if (hsfsts.hsf_status.berasesz == 0x1) {
-        bank_size = ICH_FLASH_SEG_SIZE_4K;
-        iteration = 1;
-    } else if (hsfsts.hsf_status.berasesz == 0x3) {
-        bank_size = ICH_FLASH_SEG_SIZE_64K;
-        iteration = 1;
-    } else {
-        return error;
-    }
-
-    for (j = 0; j < iteration ; j++) {
-        do {
-            count++;
-            /* Steps */
-            error = e1000_ich8_cycle_init(hw);
-            if (error != E1000_SUCCESS) {
-                error_flag = 1;
-                break;
-            }
-
-            /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash
-             * Control */
-            hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
-            hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
-            E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
-
-            /* Write the last 24 bits of an index within the block into Flash
-             * Linear address field in Flash Address.  This probably needs to
-             * be calculated here based off the on-chip erase sector size and
-             * the software bank size (4, 8 or 64 KBytes) */
-            flash_linear_address = bank * bank_size + j * sub_sector_size;
-            flash_linear_address += hw->flash_base_addr;
-            flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK;
-
-            E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
-
-            error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT);
-            /* Check if FCERR is set to 1.  If 1, clear it and try the whole
-             * sequence a few more times else Done */
-            if (error == E1000_SUCCESS) {
-                break;
-            } else {
-                hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-                if (hsfsts.hsf_status.flcerr == 1) {
-                    /* repeat for some time before giving up */
-                    continue;
-                } else if (hsfsts.hsf_status.flcdone == 0) {
-                    error_flag = 1;
-                    break;
-                }
-            }
-        } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
-        if (error_flag == 1)
-            break;
-    }
-    if (error_flag != 1)
-        error = E1000_SUCCESS;
-    return error;
-}
-
-static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
-						 u32 cnf_base_addr,
-						 u32 cnf_size)
-{
-    u32 ret_val = E1000_SUCCESS;
-    u16 word_addr, reg_data, reg_addr;
-    u16 i;
-
-    /* cnf_base_addr is in DWORD */
-    word_addr = (u16)(cnf_base_addr << 1);
-
-    /* cnf_size is returned in size of dwords */
-    for (i = 0; i < cnf_size; i++) {
-        ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, &reg_data);
-        if (ret_val)
-            return ret_val;
-
-        ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, &reg_addr);
-        if (ret_val)
-            return ret_val;
-
-        ret_val = e1000_get_software_flag(hw);
-        if (ret_val != E1000_SUCCESS)
-            return ret_val;
-
-        ret_val = e1000_write_phy_reg_ex(hw, (u32)reg_addr, reg_data);
-
-        e1000_release_software_flag(hw);
-    }
-
-    return ret_val;
-}
-
-
-/******************************************************************************
- * This function initializes the PHY from the NVM on ICH8 platforms. This
- * is needed due to an issue where the NVM configuration is not properly
- * autoloaded after power transitions. Therefore, after each PHY reset, we
- * will load the configuration data out of the NVM manually.
- *
- * hw: Struct containing variables accessed by shared code
- *****************************************************************************/
-static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw)
-{
-    u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop;
-
-    if (hw->phy_type != e1000_phy_igp_3)
-          return E1000_SUCCESS;
-
-    /* Check if SW needs configure the PHY */
-    reg_data = er32(FEXTNVM);
-    if (!(reg_data & FEXTNVM_SW_CONFIG))
-        return E1000_SUCCESS;
-
-    /* Wait for basic configuration completes before proceeding*/
-    loop = 0;
-    do {
-        reg_data = er32(STATUS) & E1000_STATUS_LAN_INIT_DONE;
-        udelay(100);
-        loop++;
-    } while ((!reg_data) && (loop < 50));
-
-    /* Clear the Init Done bit for the next init event */
-    reg_data = er32(STATUS);
-    reg_data &= ~E1000_STATUS_LAN_INIT_DONE;
-    ew32(STATUS, reg_data);
-
-    /* Make sure HW does not configure LCD from PHY extended configuration
-       before SW configuration */
-    reg_data = er32(EXTCNF_CTRL);
-    if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) {
-        reg_data = er32(EXTCNF_SIZE);
-        cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH;
-        cnf_size >>= 16;
-        if (cnf_size) {
-            reg_data = er32(EXTCNF_CTRL);
-            cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER;
-            /* cnf_base_addr is in DWORD */
-            cnf_base_addr >>= 16;
-
-            /* Configure LCD from extended configuration region. */
-            ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr,
-                                                            cnf_size);
-            if (ret_val)
-                return ret_val;
-        }
-    }
-
-    return E1000_SUCCESS;
+	DEBUGFUNC("e1000_get_phy_cfg_done");
+	mdelay(10);
+	return E1000_SUCCESS;
 }
-
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index a8866bdbb671..9acfddb0dafb 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -35,7 +35,6 @@
 
 #include "e1000_osdep.h"
 
-
 /* Forward declarations of structures used by the shared code */
 struct e1000_hw;
 struct e1000_hw_stats;
@@ -43,252 +42,231 @@ struct e1000_hw_stats;
 /* Enumerated types specific to the e1000 hardware */
 /* Media Access Controlers */
 typedef enum {
-    e1000_undefined = 0,
-    e1000_82542_rev2_0,
-    e1000_82542_rev2_1,
-    e1000_82543,
-    e1000_82544,
-    e1000_82540,
-    e1000_82545,
-    e1000_82545_rev_3,
-    e1000_82546,
-    e1000_82546_rev_3,
-    e1000_82541,
-    e1000_82541_rev_2,
-    e1000_82547,
-    e1000_82547_rev_2,
-    e1000_82571,
-    e1000_82572,
-    e1000_82573,
-    e1000_80003es2lan,
-    e1000_ich8lan,
-    e1000_num_macs
+	e1000_undefined = 0,
+	e1000_82542_rev2_0,
+	e1000_82542_rev2_1,
+	e1000_82543,
+	e1000_82544,
+	e1000_82540,
+	e1000_82545,
+	e1000_82545_rev_3,
+	e1000_82546,
+	e1000_82546_rev_3,
+	e1000_82541,
+	e1000_82541_rev_2,
+	e1000_82547,
+	e1000_82547_rev_2,
+	e1000_num_macs
 } e1000_mac_type;
 
 typedef enum {
-    e1000_eeprom_uninitialized = 0,
-    e1000_eeprom_spi,
-    e1000_eeprom_microwire,
-    e1000_eeprom_flash,
-    e1000_eeprom_ich8,
-    e1000_eeprom_none, /* No NVM support */
-    e1000_num_eeprom_types
+	e1000_eeprom_uninitialized = 0,
+	e1000_eeprom_spi,
+	e1000_eeprom_microwire,
+	e1000_eeprom_flash,
+	e1000_eeprom_none,	/* No NVM support */
+	e1000_num_eeprom_types
 } e1000_eeprom_type;
 
 /* Media Types */
 typedef enum {
-    e1000_media_type_copper = 0,
-    e1000_media_type_fiber = 1,
-    e1000_media_type_internal_serdes = 2,
-    e1000_num_media_types
+	e1000_media_type_copper = 0,
+	e1000_media_type_fiber = 1,
+	e1000_media_type_internal_serdes = 2,
+	e1000_num_media_types
 } e1000_media_type;
 
 typedef enum {
-    e1000_10_half = 0,
-    e1000_10_full = 1,
-    e1000_100_half = 2,
-    e1000_100_full = 3
+	e1000_10_half = 0,
+	e1000_10_full = 1,
+	e1000_100_half = 2,
+	e1000_100_full = 3
 } e1000_speed_duplex_type;
 
 /* Flow Control Settings */
 typedef enum {
-    E1000_FC_NONE = 0,
-    E1000_FC_RX_PAUSE = 1,
-    E1000_FC_TX_PAUSE = 2,
-    E1000_FC_FULL = 3,
-    E1000_FC_DEFAULT = 0xFF
+	E1000_FC_NONE = 0,
+	E1000_FC_RX_PAUSE = 1,
+	E1000_FC_TX_PAUSE = 2,
+	E1000_FC_FULL = 3,
+	E1000_FC_DEFAULT = 0xFF
 } e1000_fc_type;
 
 struct e1000_shadow_ram {
-    u16 eeprom_word;
-    bool modified;
+	u16 eeprom_word;
+	bool modified;
 };
 
 /* PCI bus types */
 typedef enum {
-    e1000_bus_type_unknown = 0,
-    e1000_bus_type_pci,
-    e1000_bus_type_pcix,
-    e1000_bus_type_pci_express,
-    e1000_bus_type_reserved
+	e1000_bus_type_unknown = 0,
+	e1000_bus_type_pci,
+	e1000_bus_type_pcix,
+	e1000_bus_type_reserved
 } e1000_bus_type;
 
 /* PCI bus speeds */
 typedef enum {
-    e1000_bus_speed_unknown = 0,
-    e1000_bus_speed_33,
-    e1000_bus_speed_66,
-    e1000_bus_speed_100,
-    e1000_bus_speed_120,
-    e1000_bus_speed_133,
-    e1000_bus_speed_2500,
-    e1000_bus_speed_reserved
+	e1000_bus_speed_unknown = 0,
+	e1000_bus_speed_33,
+	e1000_bus_speed_66,
+	e1000_bus_speed_100,
+	e1000_bus_speed_120,
+	e1000_bus_speed_133,
+	e1000_bus_speed_reserved
 } e1000_bus_speed;
 
 /* PCI bus widths */
 typedef enum {
-    e1000_bus_width_unknown = 0,
-    /* These PCIe values should literally match the possible return values
-     * from config space */
-    e1000_bus_width_pciex_1 = 1,
-    e1000_bus_width_pciex_2 = 2,
-    e1000_bus_width_pciex_4 = 4,
-    e1000_bus_width_32,
-    e1000_bus_width_64,
-    e1000_bus_width_reserved
+	e1000_bus_width_unknown = 0,
+	e1000_bus_width_32,
+	e1000_bus_width_64,
+	e1000_bus_width_reserved
 } e1000_bus_width;
 
 /* PHY status info structure and supporting enums */
 typedef enum {
-    e1000_cable_length_50 = 0,
-    e1000_cable_length_50_80,
-    e1000_cable_length_80_110,
-    e1000_cable_length_110_140,
-    e1000_cable_length_140,
-    e1000_cable_length_undefined = 0xFF
+	e1000_cable_length_50 = 0,
+	e1000_cable_length_50_80,
+	e1000_cable_length_80_110,
+	e1000_cable_length_110_140,
+	e1000_cable_length_140,
+	e1000_cable_length_undefined = 0xFF
 } e1000_cable_length;
 
 typedef enum {
-    e1000_gg_cable_length_60 = 0,
-    e1000_gg_cable_length_60_115 = 1,
-    e1000_gg_cable_length_115_150 = 2,
-    e1000_gg_cable_length_150 = 4
+	e1000_gg_cable_length_60 = 0,
+	e1000_gg_cable_length_60_115 = 1,
+	e1000_gg_cable_length_115_150 = 2,
+	e1000_gg_cable_length_150 = 4
 } e1000_gg_cable_length;
 
 typedef enum {
-    e1000_igp_cable_length_10  = 10,
-    e1000_igp_cable_length_20  = 20,
-    e1000_igp_cable_length_30  = 30,
-    e1000_igp_cable_length_40  = 40,
-    e1000_igp_cable_length_50  = 50,
-    e1000_igp_cable_length_60  = 60,
-    e1000_igp_cable_length_70  = 70,
-    e1000_igp_cable_length_80  = 80,
-    e1000_igp_cable_length_90  = 90,
-    e1000_igp_cable_length_100 = 100,
-    e1000_igp_cable_length_110 = 110,
-    e1000_igp_cable_length_115 = 115,
-    e1000_igp_cable_length_120 = 120,
-    e1000_igp_cable_length_130 = 130,
-    e1000_igp_cable_length_140 = 140,
-    e1000_igp_cable_length_150 = 150,
-    e1000_igp_cable_length_160 = 160,
-    e1000_igp_cable_length_170 = 170,
-    e1000_igp_cable_length_180 = 180
+	e1000_igp_cable_length_10 = 10,
+	e1000_igp_cable_length_20 = 20,
+	e1000_igp_cable_length_30 = 30,
+	e1000_igp_cable_length_40 = 40,
+	e1000_igp_cable_length_50 = 50,
+	e1000_igp_cable_length_60 = 60,
+	e1000_igp_cable_length_70 = 70,
+	e1000_igp_cable_length_80 = 80,
+	e1000_igp_cable_length_90 = 90,
+	e1000_igp_cable_length_100 = 100,
+	e1000_igp_cable_length_110 = 110,
+	e1000_igp_cable_length_115 = 115,
+	e1000_igp_cable_length_120 = 120,
+	e1000_igp_cable_length_130 = 130,
+	e1000_igp_cable_length_140 = 140,
+	e1000_igp_cable_length_150 = 150,
+	e1000_igp_cable_length_160 = 160,
+	e1000_igp_cable_length_170 = 170,
+	e1000_igp_cable_length_180 = 180
 } e1000_igp_cable_length;
 
 typedef enum {
-    e1000_10bt_ext_dist_enable_normal = 0,
-    e1000_10bt_ext_dist_enable_lower,
-    e1000_10bt_ext_dist_enable_undefined = 0xFF
+	e1000_10bt_ext_dist_enable_normal = 0,
+	e1000_10bt_ext_dist_enable_lower,
+	e1000_10bt_ext_dist_enable_undefined = 0xFF
 } e1000_10bt_ext_dist_enable;
 
 typedef enum {
-    e1000_rev_polarity_normal = 0,
-    e1000_rev_polarity_reversed,
-    e1000_rev_polarity_undefined = 0xFF
+	e1000_rev_polarity_normal = 0,
+	e1000_rev_polarity_reversed,
+	e1000_rev_polarity_undefined = 0xFF
 } e1000_rev_polarity;
 
 typedef enum {
-    e1000_downshift_normal = 0,
-    e1000_downshift_activated,
-    e1000_downshift_undefined = 0xFF
+	e1000_downshift_normal = 0,
+	e1000_downshift_activated,
+	e1000_downshift_undefined = 0xFF
 } e1000_downshift;
 
 typedef enum {
-    e1000_smart_speed_default = 0,
-    e1000_smart_speed_on,
-    e1000_smart_speed_off
+	e1000_smart_speed_default = 0,
+	e1000_smart_speed_on,
+	e1000_smart_speed_off
 } e1000_smart_speed;
 
 typedef enum {
-    e1000_polarity_reversal_enabled = 0,
-    e1000_polarity_reversal_disabled,
-    e1000_polarity_reversal_undefined = 0xFF
+	e1000_polarity_reversal_enabled = 0,
+	e1000_polarity_reversal_disabled,
+	e1000_polarity_reversal_undefined = 0xFF
 } e1000_polarity_reversal;
 
 typedef enum {
-    e1000_auto_x_mode_manual_mdi = 0,
-    e1000_auto_x_mode_manual_mdix,
-    e1000_auto_x_mode_auto1,
-    e1000_auto_x_mode_auto2,
-    e1000_auto_x_mode_undefined = 0xFF
+	e1000_auto_x_mode_manual_mdi = 0,
+	e1000_auto_x_mode_manual_mdix,
+	e1000_auto_x_mode_auto1,
+	e1000_auto_x_mode_auto2,
+	e1000_auto_x_mode_undefined = 0xFF
 } e1000_auto_x_mode;
 
 typedef enum {
-    e1000_1000t_rx_status_not_ok = 0,
-    e1000_1000t_rx_status_ok,
-    e1000_1000t_rx_status_undefined = 0xFF
+	e1000_1000t_rx_status_not_ok = 0,
+	e1000_1000t_rx_status_ok,
+	e1000_1000t_rx_status_undefined = 0xFF
 } e1000_1000t_rx_status;
 
 typedef enum {
     e1000_phy_m88 = 0,
     e1000_phy_igp,
-    e1000_phy_igp_2,
-    e1000_phy_gg82563,
-    e1000_phy_igp_3,
-    e1000_phy_ife,
     e1000_phy_undefined = 0xFF
 } e1000_phy_type;
 
 typedef enum {
-    e1000_ms_hw_default = 0,
-    e1000_ms_force_master,
-    e1000_ms_force_slave,
-    e1000_ms_auto
+	e1000_ms_hw_default = 0,
+	e1000_ms_force_master,
+	e1000_ms_force_slave,
+	e1000_ms_auto
 } e1000_ms_type;
 
 typedef enum {
-    e1000_ffe_config_enabled = 0,
-    e1000_ffe_config_active,
-    e1000_ffe_config_blocked
+	e1000_ffe_config_enabled = 0,
+	e1000_ffe_config_active,
+	e1000_ffe_config_blocked
 } e1000_ffe_config;
 
 typedef enum {
-    e1000_dsp_config_disabled = 0,
-    e1000_dsp_config_enabled,
-    e1000_dsp_config_activated,
-    e1000_dsp_config_undefined = 0xFF
+	e1000_dsp_config_disabled = 0,
+	e1000_dsp_config_enabled,
+	e1000_dsp_config_activated,
+	e1000_dsp_config_undefined = 0xFF
 } e1000_dsp_config;
 
 struct e1000_phy_info {
-    e1000_cable_length cable_length;
-    e1000_10bt_ext_dist_enable extended_10bt_distance;
-    e1000_rev_polarity cable_polarity;
-    e1000_downshift downshift;
-    e1000_polarity_reversal polarity_correction;
-    e1000_auto_x_mode mdix_mode;
-    e1000_1000t_rx_status local_rx;
-    e1000_1000t_rx_status remote_rx;
+	e1000_cable_length cable_length;
+	e1000_10bt_ext_dist_enable extended_10bt_distance;
+	e1000_rev_polarity cable_polarity;
+	e1000_downshift downshift;
+	e1000_polarity_reversal polarity_correction;
+	e1000_auto_x_mode mdix_mode;
+	e1000_1000t_rx_status local_rx;
+	e1000_1000t_rx_status remote_rx;
 };
 
 struct e1000_phy_stats {
-    u32 idle_errors;
-    u32 receive_errors;
+	u32 idle_errors;
+	u32 receive_errors;
 };
 
 struct e1000_eeprom_info {
-    e1000_eeprom_type type;
-    u16 word_size;
-    u16 opcode_bits;
-    u16 address_bits;
-    u16 delay_usec;
-    u16 page_size;
-    bool use_eerd;
-    bool use_eewr;
+	e1000_eeprom_type type;
+	u16 word_size;
+	u16 opcode_bits;
+	u16 address_bits;
+	u16 delay_usec;
+	u16 page_size;
 };
 
 /* Flex ASF Information */
 #define E1000_HOST_IF_MAX_SIZE  2048
 
 typedef enum {
-    e1000_byte_align = 0,
-    e1000_word_align = 1,
-    e1000_dword_align = 2
+	e1000_byte_align = 0,
+	e1000_word_align = 1,
+	e1000_dword_align = 2
 } e1000_align_type;
 
-
-
 /* Error Codes */
 #define E1000_SUCCESS      0
 #define E1000_ERR_EEPROM   1
@@ -301,7 +279,6 @@ typedef enum {
 #define E1000_ERR_MASTER_REQUESTS_PENDING 10
 #define E1000_ERR_HOST_INTERFACE_COMMAND 11
 #define E1000_BLK_PHY_RESET   12
-#define E1000_ERR_SWFW_SYNC 13
 
 #define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
                                      (((_value) & 0xff00) >> 8))
@@ -318,19 +295,17 @@ s32 e1000_setup_link(struct e1000_hw *hw);
 s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
 void e1000_config_collision_dist(struct e1000_hw *hw);
 s32 e1000_check_for_link(struct e1000_hw *hw);
-s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex);
 s32 e1000_force_mac_fc(struct e1000_hw *hw);
 
 /* PHY */
-s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data);
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data);
 s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
 s32 e1000_phy_hw_reset(struct e1000_hw *hw);
 s32 e1000_phy_reset(struct e1000_hw *hw);
 s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
 s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
 
-void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
-
 /* EEPROM Functions */
 s32 e1000_init_eeprom_params(struct e1000_hw *hw);
 
@@ -338,66 +313,63 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw);
 u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
 
 #define E1000_MNG_DHCP_TX_PAYLOAD_CMD   64
-#define E1000_HI_MAX_MNG_DATA_LENGTH    0x6F8   /* Host Interface data length */
+#define E1000_HI_MAX_MNG_DATA_LENGTH    0x6F8	/* Host Interface data length */
 
-#define E1000_MNG_DHCP_COMMAND_TIMEOUT  10      /* Time in ms to process MNG command */
-#define E1000_MNG_DHCP_COOKIE_OFFSET    0x6F0   /* Cookie offset */
-#define E1000_MNG_DHCP_COOKIE_LENGTH    0x10    /* Cookie length */
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT  10	/* Time in ms to process MNG command */
+#define E1000_MNG_DHCP_COOKIE_OFFSET    0x6F0	/* Cookie offset */
+#define E1000_MNG_DHCP_COOKIE_LENGTH    0x10	/* Cookie length */
 #define E1000_MNG_IAMT_MODE             0x3
 #define E1000_MNG_ICH_IAMT_MODE         0x2
-#define E1000_IAMT_SIGNATURE            0x544D4149 /* Intel(R) Active Management Technology signature */
+#define E1000_IAMT_SIGNATURE            0x544D4149	/* Intel(R) Active Management Technology signature */
 
-#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
-#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT    0x2 /* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1	/* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT    0x2	/* DHCP parsing enabled */
 #define E1000_VFTA_ENTRY_SHIFT                       0x5
 #define E1000_VFTA_ENTRY_MASK                        0x7F
 #define E1000_VFTA_ENTRY_BIT_SHIFT_MASK              0x1F
 
 struct e1000_host_mng_command_header {
-    u8 command_id;
-    u8 checksum;
-    u16 reserved1;
-    u16 reserved2;
-    u16 command_length;
+	u8 command_id;
+	u8 checksum;
+	u16 reserved1;
+	u16 reserved2;
+	u16 command_length;
 };
 
 struct e1000_host_mng_command_info {
-    struct e1000_host_mng_command_header command_header;  /* Command Head/Command Result Head has 4 bytes */
-    u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];   /* Command data can length 0..0x658*/
+	struct e1000_host_mng_command_header command_header;	/* Command Head/Command Result Head has 4 bytes */
+	u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];	/* Command data can length 0..0x658 */
 };
 #ifdef __BIG_ENDIAN
-struct e1000_host_mng_dhcp_cookie{
-    u32 signature;
-    u16 vlan_id;
-    u8 reserved0;
-    u8 status;
-    u32 reserved1;
-    u8 checksum;
-    u8 reserved3;
-    u16 reserved2;
+struct e1000_host_mng_dhcp_cookie {
+	u32 signature;
+	u16 vlan_id;
+	u8 reserved0;
+	u8 status;
+	u32 reserved1;
+	u8 checksum;
+	u8 reserved3;
+	u16 reserved2;
 };
 #else
-struct e1000_host_mng_dhcp_cookie{
-    u32 signature;
-    u8 status;
-    u8 reserved0;
-    u16 vlan_id;
-    u32 reserved1;
-    u16 reserved2;
-    u8 reserved3;
-    u8 checksum;
+struct e1000_host_mng_dhcp_cookie {
+	u32 signature;
+	u8 status;
+	u8 reserved0;
+	u16 vlan_id;
+	u32 reserved1;
+	u16 reserved2;
+	u8 reserved3;
+	u8 checksum;
 };
 #endif
 
-s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
-                                  u16 length);
 bool e1000_check_mng_mode(struct e1000_hw *hw);
-bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
-s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
 s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
 s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
-s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
-s32 e1000_read_mac_addr(struct e1000_hw * hw);
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
+s32 e1000_read_mac_addr(struct e1000_hw *hw);
 
 /* Filters (multicast, vlan, receive) */
 u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
@@ -417,18 +389,15 @@ s32 e1000_blink_led_start(struct e1000_hw *hw);
 /* Everything else */
 void e1000_reset_adaptive(struct e1000_hw *hw);
 void e1000_update_adaptive(struct e1000_hw *hw);
-void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, u32 frame_len, u8 * mac_addr);
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+			    u32 frame_len, u8 * mac_addr);
 void e1000_get_bus_info(struct e1000_hw *hw);
 void e1000_pci_set_mwi(struct e1000_hw *hw);
 void e1000_pci_clear_mwi(struct e1000_hw *hw);
-s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
 void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
 int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
 /* Port I/O is only supported on 82544 and newer */
 void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
-s32 e1000_disable_pciex_master(struct e1000_hw *hw);
-s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
-
 
 #define E1000_READ_REG_IO(a, reg) \
     e1000_read_reg_io((a), E1000_##reg)
@@ -471,36 +440,7 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
 #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
 #define E1000_DEV_ID_82547EI             0x1019
 #define E1000_DEV_ID_82547EI_MOBILE      0x101A
-#define E1000_DEV_ID_82571EB_COPPER      0x105E
-#define E1000_DEV_ID_82571EB_FIBER       0x105F
-#define E1000_DEV_ID_82571EB_SERDES      0x1060
-#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
-#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
-#define E1000_DEV_ID_82571EB_QUAD_FIBER  0x10A5
-#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE  0x10BC
-#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
-#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
-#define E1000_DEV_ID_82572EI_COPPER      0x107D
-#define E1000_DEV_ID_82572EI_FIBER       0x107E
-#define E1000_DEV_ID_82572EI_SERDES      0x107F
-#define E1000_DEV_ID_82572EI             0x10B9
-#define E1000_DEV_ID_82573E              0x108B
-#define E1000_DEV_ID_82573E_IAMT         0x108C
-#define E1000_DEV_ID_82573L              0x109A
 #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
-#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT     0x1096
-#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT     0x1098
-#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT     0x10BA
-#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT     0x10BB
-
-#define E1000_DEV_ID_ICH8_IGP_M_AMT      0x1049
-#define E1000_DEV_ID_ICH8_IGP_AMT        0x104A
-#define E1000_DEV_ID_ICH8_IGP_C          0x104B
-#define E1000_DEV_ID_ICH8_IFE            0x104C
-#define E1000_DEV_ID_ICH8_IFE_GT         0x10C4
-#define E1000_DEV_ID_ICH8_IFE_G          0x10C5
-#define E1000_DEV_ID_ICH8_IGP_M          0x104D
-
 
 #define NODE_ADDRESS_SIZE 6
 #define ETH_LENGTH_OF_ADDRESS 6
@@ -523,21 +463,20 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
 
 /* The sizes (in bytes) of a ethernet packet */
 #define ENET_HEADER_SIZE             14
-#define MINIMUM_ETHERNET_FRAME_SIZE  64   /* With FCS */
+#define MINIMUM_ETHERNET_FRAME_SIZE  64	/* With FCS */
 #define ETHERNET_FCS_SIZE            4
 #define MINIMUM_ETHERNET_PACKET_SIZE \
     (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
 #define CRC_LENGTH                   ETHERNET_FCS_SIZE
 #define MAX_JUMBO_FRAME_SIZE         0x3F00
 
-
 /* 802.1q VLAN Packet Sizes */
-#define VLAN_TAG_SIZE  4     /* 802.3ac tag (not DMAed) */
+#define VLAN_TAG_SIZE  4	/* 802.3ac tag (not DMAed) */
 
 /* Ethertype field values */
-#define ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.3ac packet */
-#define ETHERNET_IP_TYPE        0x0800  /* IP packets */
-#define ETHERNET_ARP_TYPE       0x0806  /* Address Resolution Protocol (ARP) */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100	/* 802.3ac packet */
+#define ETHERNET_IP_TYPE        0x0800	/* IP packets */
+#define ETHERNET_ARP_TYPE       0x0806	/* Address Resolution Protocol (ARP) */
 
 /* Packet Header defines */
 #define IP_PROTOCOL_TCP    6
@@ -567,15 +506,6 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
     E1000_IMS_RXSEQ  |    \
     E1000_IMS_LSC)
 
-/* Additional interrupts need to be handled for e1000_ich8lan:
-    DSW = The FW changed the status of the DISSW bit in FWSM
-    PHYINT = The LAN connected device generates an interrupt
-    EPRST = Manageability reset event */
-#define IMS_ICH8LAN_ENABLE_MASK (\
-    E1000_IMS_DSW   | \
-    E1000_IMS_PHYINT | \
-    E1000_IMS_EPRST)
-
 /* Number of high/low register pairs in the RAR. The RAR (Receive Address
  * Registers) holds the directed and multicast addresses that we monitor. We
  * reserve one of these spots for our directed address, allowing us room for
@@ -583,100 +513,98 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
  */
 #define E1000_RAR_ENTRIES 15
 
-#define E1000_RAR_ENTRIES_ICH8LAN  6
-
 #define MIN_NUMBER_OF_DESCRIPTORS  8
 #define MAX_NUMBER_OF_DESCRIPTORS  0xFFF8
 
 /* Receive Descriptor */
 struct e1000_rx_desc {
-    __le64 buffer_addr; /* Address of the descriptor's data buffer */
-    __le16 length;     /* Length of data DMAed into data buffer */
-    __le16 csum;       /* Packet checksum */
-    u8 status;      /* Descriptor status */
-    u8 errors;      /* Descriptor Errors */
-    __le16 special;
+	__le64 buffer_addr;	/* Address of the descriptor's data buffer */
+	__le16 length;		/* Length of data DMAed into data buffer */
+	__le16 csum;		/* Packet checksum */
+	u8 status;		/* Descriptor status */
+	u8 errors;		/* Descriptor Errors */
+	__le16 special;
 };
 
 /* Receive Descriptor - Extended */
 union e1000_rx_desc_extended {
-    struct {
-        __le64 buffer_addr;
-        __le64 reserved;
-    } read;
-    struct {
-        struct {
-            __le32 mrq;              /* Multiple Rx Queues */
-            union {
-                __le32 rss;          /* RSS Hash */
-                struct {
-                    __le16 ip_id;    /* IP id */
-                    __le16 csum;     /* Packet Checksum */
-                } csum_ip;
-            } hi_dword;
-        } lower;
-        struct {
-            __le32 status_error;     /* ext status/error */
-            __le16 length;
-            __le16 vlan;             /* VLAN tag */
-        } upper;
-    } wb;  /* writeback */
+	struct {
+		__le64 buffer_addr;
+		__le64 reserved;
+	} read;
+	struct {
+		struct {
+			__le32 mrq;	/* Multiple Rx Queues */
+			union {
+				__le32 rss;	/* RSS Hash */
+				struct {
+					__le16 ip_id;	/* IP id */
+					__le16 csum;	/* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error;	/* ext status/error */
+			__le16 length;
+			__le16 vlan;	/* VLAN tag */
+		} upper;
+	} wb;			/* writeback */
 };
 
 #define MAX_PS_BUFFERS 4
 /* Receive Descriptor - Packet Split */
 union e1000_rx_desc_packet_split {
-    struct {
-        /* one buffer for protocol header(s), three data buffers */
-        __le64 buffer_addr[MAX_PS_BUFFERS];
-    } read;
-    struct {
-        struct {
-            __le32 mrq;              /* Multiple Rx Queues */
-            union {
-                __le32 rss;          /* RSS Hash */
-                struct {
-                    __le16 ip_id;    /* IP id */
-                    __le16 csum;     /* Packet Checksum */
-                } csum_ip;
-            } hi_dword;
-        } lower;
-        struct {
-            __le32 status_error;     /* ext status/error */
-            __le16 length0;          /* length of buffer 0 */
-            __le16 vlan;             /* VLAN tag */
-        } middle;
-        struct {
-            __le16 header_status;
-            __le16 length[3];        /* length of buffers 1-3 */
-        } upper;
-        __le64 reserved;
-    } wb; /* writeback */
+	struct {
+		/* one buffer for protocol header(s), three data buffers */
+		__le64 buffer_addr[MAX_PS_BUFFERS];
+	} read;
+	struct {
+		struct {
+			__le32 mrq;	/* Multiple Rx Queues */
+			union {
+				__le32 rss;	/* RSS Hash */
+				struct {
+					__le16 ip_id;	/* IP id */
+					__le16 csum;	/* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error;	/* ext status/error */
+			__le16 length0;	/* length of buffer 0 */
+			__le16 vlan;	/* VLAN tag */
+		} middle;
+		struct {
+			__le16 header_status;
+			__le16 length[3];	/* length of buffers 1-3 */
+		} upper;
+		__le64 reserved;
+	} wb;			/* writeback */
 };
 
-/* Receive Decriptor bit definitions */
-#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
-#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
-#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
-#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum caculated */
-#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
-#define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
-#define E1000_RXD_STAT_PIF      0x80    /* passed in-exact filter */
-#define E1000_RXD_STAT_IPIDV    0x200   /* IP identification valid */
-#define E1000_RXD_STAT_UDPV     0x400   /* Valid UDP checksum */
-#define E1000_RXD_STAT_ACK      0x8000  /* ACK Packet indication */
-#define E1000_RXD_ERR_CE        0x01    /* CRC Error */
-#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
-#define E1000_RXD_ERR_SEQ       0x04    /* Sequence Error */
-#define E1000_RXD_ERR_CXE       0x10    /* Carrier Extension Error */
-#define E1000_RXD_ERR_TCPE      0x20    /* TCP/UDP Checksum Error */
-#define E1000_RXD_ERR_IPE       0x40    /* IP Checksum Error */
-#define E1000_RXD_ERR_RXE       0x80    /* Rx Data Error */
-#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
-#define E1000_RXD_SPC_PRI_MASK  0xE000  /* Priority is in upper 3 bits */
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD       0x01	/* Descriptor Done */
+#define E1000_RXD_STAT_EOP      0x02	/* End of Packet */
+#define E1000_RXD_STAT_IXSM     0x04	/* Ignore checksum */
+#define E1000_RXD_STAT_VP       0x08	/* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS    0x10	/* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS    0x20	/* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS     0x40	/* IP xsum calculated */
+#define E1000_RXD_STAT_PIF      0x80	/* passed in-exact filter */
+#define E1000_RXD_STAT_IPIDV    0x200	/* IP identification valid */
+#define E1000_RXD_STAT_UDPV     0x400	/* Valid UDP checksum */
+#define E1000_RXD_STAT_ACK      0x8000	/* ACK Packet indication */
+#define E1000_RXD_ERR_CE        0x01	/* CRC Error */
+#define E1000_RXD_ERR_SE        0x02	/* Symbol Error */
+#define E1000_RXD_ERR_SEQ       0x04	/* Sequence Error */
+#define E1000_RXD_ERR_CXE       0x10	/* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE      0x20	/* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE       0x40	/* IP Checksum Error */
+#define E1000_RXD_ERR_RXE       0x80	/* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF	/* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK  0xE000	/* Priority is in upper 3 bits */
 #define E1000_RXD_SPC_PRI_SHIFT 13
-#define E1000_RXD_SPC_CFI_MASK  0x1000  /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_MASK  0x1000	/* CFI is bit 12 */
 #define E1000_RXD_SPC_CFI_SHIFT 12
 
 #define E1000_RXDEXT_STATERR_CE    0x01000000
@@ -698,7 +626,6 @@ union e1000_rx_desc_packet_split {
     E1000_RXD_ERR_CXE |                \
     E1000_RXD_ERR_RXE)
 
-
 /* Same mask, but for extended and packet split descriptors */
 #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
     E1000_RXDEXT_STATERR_CE  |            \
@@ -707,152 +634,145 @@ union e1000_rx_desc_packet_split {
     E1000_RXDEXT_STATERR_CXE |            \
     E1000_RXDEXT_STATERR_RXE)
 
-
 /* Transmit Descriptor */
 struct e1000_tx_desc {
-    __le64 buffer_addr;       /* Address of the descriptor's data buffer */
-    union {
-        __le32 data;
-        struct {
-            __le16 length;    /* Data buffer length */
-            u8 cso;        /* Checksum offset */
-            u8 cmd;        /* Descriptor control */
-        } flags;
-    } lower;
-    union {
-        __le32 data;
-        struct {
-            u8 status;     /* Descriptor status */
-            u8 css;        /* Checksum start */
-            __le16 special;
-        } fields;
-    } upper;
+	__le64 buffer_addr;	/* Address of the descriptor's data buffer */
+	union {
+		__le32 data;
+		struct {
+			__le16 length;	/* Data buffer length */
+			u8 cso;	/* Checksum offset */
+			u8 cmd;	/* Descriptor control */
+		} flags;
+	} lower;
+	union {
+		__le32 data;
+		struct {
+			u8 status;	/* Descriptor status */
+			u8 css;	/* Checksum start */
+			__le16 special;
+		} fields;
+	} upper;
 };
 
 /* Transmit Descriptor bit definitions */
-#define E1000_TXD_DTYP_D     0x00100000 /* Data Descriptor */
-#define E1000_TXD_DTYP_C     0x00000000 /* Context Descriptor */
-#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_IC     0x04000000 /* Insert Checksum */
-#define E1000_TXD_CMD_RS     0x08000000 /* Report Status */
-#define E1000_TXD_CMD_RPS    0x10000000 /* Report Packet Sent */
-#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */
-#define E1000_TXD_CMD_IDE    0x80000000 /* Enable Tidv register */
-#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
-#define E1000_TXD_STAT_EC    0x00000002 /* Excess Collisions */
-#define E1000_TXD_STAT_LC    0x00000004 /* Late Collisions */
-#define E1000_TXD_STAT_TU    0x00000008 /* Transmit underrun */
-#define E1000_TXD_CMD_TCP    0x01000000 /* TCP packet */
-#define E1000_TXD_CMD_IP     0x02000000 /* IP packet */
-#define E1000_TXD_CMD_TSE    0x04000000 /* TCP Seg enable */
-#define E1000_TXD_STAT_TC    0x00000004 /* Tx Underrun */
+#define E1000_TXD_DTYP_D     0x00100000	/* Data Descriptor */
+#define E1000_TXD_DTYP_C     0x00000000	/* Context Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01	/* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02	/* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP    0x01000000	/* End of Packet */
+#define E1000_TXD_CMD_IFCS   0x02000000	/* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC     0x04000000	/* Insert Checksum */
+#define E1000_TXD_CMD_RS     0x08000000	/* Report Status */
+#define E1000_TXD_CMD_RPS    0x10000000	/* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT   0x20000000	/* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE    0x40000000	/* Add VLAN tag */
+#define E1000_TXD_CMD_IDE    0x80000000	/* Enable Tidv register */
+#define E1000_TXD_STAT_DD    0x00000001	/* Descriptor Done */
+#define E1000_TXD_STAT_EC    0x00000002	/* Excess Collisions */
+#define E1000_TXD_STAT_LC    0x00000004	/* Late Collisions */
+#define E1000_TXD_STAT_TU    0x00000008	/* Transmit underrun */
+#define E1000_TXD_CMD_TCP    0x01000000	/* TCP packet */
+#define E1000_TXD_CMD_IP     0x02000000	/* IP packet */
+#define E1000_TXD_CMD_TSE    0x04000000	/* TCP Seg enable */
+#define E1000_TXD_STAT_TC    0x00000004	/* Tx Underrun */
 
 /* Offload Context Descriptor */
 struct e1000_context_desc {
-    union {
-        __le32 ip_config;
-        struct {
-            u8 ipcss;      /* IP checksum start */
-            u8 ipcso;      /* IP checksum offset */
-            __le16 ipcse;     /* IP checksum end */
-        } ip_fields;
-    } lower_setup;
-    union {
-        __le32 tcp_config;
-        struct {
-            u8 tucss;      /* TCP checksum start */
-            u8 tucso;      /* TCP checksum offset */
-            __le16 tucse;     /* TCP checksum end */
-        } tcp_fields;
-    } upper_setup;
-    __le32 cmd_and_length;    /* */
-    union {
-        __le32 data;
-        struct {
-            u8 status;     /* Descriptor status */
-            u8 hdr_len;    /* Header length */
-            __le16 mss;       /* Maximum segment size */
-        } fields;
-    } tcp_seg_setup;
+	union {
+		__le32 ip_config;
+		struct {
+			u8 ipcss;	/* IP checksum start */
+			u8 ipcso;	/* IP checksum offset */
+			__le16 ipcse;	/* IP checksum end */
+		} ip_fields;
+	} lower_setup;
+	union {
+		__le32 tcp_config;
+		struct {
+			u8 tucss;	/* TCP checksum start */
+			u8 tucso;	/* TCP checksum offset */
+			__le16 tucse;	/* TCP checksum end */
+		} tcp_fields;
+	} upper_setup;
+	__le32 cmd_and_length;	/* */
+	union {
+		__le32 data;
+		struct {
+			u8 status;	/* Descriptor status */
+			u8 hdr_len;	/* Header length */
+			__le16 mss;	/* Maximum segment size */
+		} fields;
+	} tcp_seg_setup;
 };
 
 /* Offload data descriptor */
 struct e1000_data_desc {
-    __le64 buffer_addr;       /* Address of the descriptor's buffer address */
-    union {
-        __le32 data;
-        struct {
-            __le16 length;    /* Data buffer length */
-            u8 typ_len_ext;        /* */
-            u8 cmd;        /* */
-        } flags;
-    } lower;
-    union {
-        __le32 data;
-        struct {
-            u8 status;     /* Descriptor status */
-            u8 popts;      /* Packet Options */
-            __le16 special;   /* */
-        } fields;
-    } upper;
+	__le64 buffer_addr;	/* Address of the descriptor's buffer address */
+	union {
+		__le32 data;
+		struct {
+			__le16 length;	/* Data buffer length */
+			u8 typ_len_ext;	/* */
+			u8 cmd;	/* */
+		} flags;
+	} lower;
+	union {
+		__le32 data;
+		struct {
+			u8 status;	/* Descriptor status */
+			u8 popts;	/* Packet Options */
+			__le16 special;	/* */
+		} fields;
+	} upper;
 };
 
 /* Filters */
-#define E1000_NUM_UNICAST          16   /* Unicast filter entries */
-#define E1000_MC_TBL_SIZE          128  /* Multicast Filter Table (4096 bits) */
-#define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
-
-#define E1000_NUM_UNICAST_ICH8LAN  7
-#define E1000_MC_TBL_SIZE_ICH8LAN  32
-
+#define E1000_NUM_UNICAST          16	/* Unicast filter entries */
+#define E1000_MC_TBL_SIZE          128	/* Multicast Filter Table (4096 bits) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128	/* VLAN Filter Table (4096 bits) */
 
 /* Receive Address Register */
 struct e1000_rar {
-    volatile __le32 low;      /* receive address low */
-    volatile __le32 high;     /* receive address high */
+	volatile __le32 low;	/* receive address low */
+	volatile __le32 high;	/* receive address high */
 };
 
 /* Number of entries in the Multicast Table Array (MTA). */
 #define E1000_NUM_MTA_REGISTERS 128
-#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32
 
 /* IPv4 Address Table Entry */
 struct e1000_ipv4_at_entry {
-    volatile u32 ipv4_addr;        /* IP Address (RW) */
-    volatile u32 reserved;
+	volatile u32 ipv4_addr;	/* IP Address (RW) */
+	volatile u32 reserved;
 };
 
 /* Four wakeup IP addresses are supported */
 #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
 #define E1000_IP4AT_SIZE                  E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
-#define E1000_IP4AT_SIZE_ICH8LAN          3
 #define E1000_IP6AT_SIZE                  1
 
 /* IPv6 Address Table Entry */
 struct e1000_ipv6_at_entry {
-    volatile u8 ipv6_addr[16];
+	volatile u8 ipv6_addr[16];
 };
 
 /* Flexible Filter Length Table Entry */
 struct e1000_fflt_entry {
-    volatile u32 length;   /* Flexible Filter Length (RW) */
-    volatile u32 reserved;
+	volatile u32 length;	/* Flexible Filter Length (RW) */
+	volatile u32 reserved;
 };
 
 /* Flexible Filter Mask Table Entry */
 struct e1000_ffmt_entry {
-    volatile u32 mask;     /* Flexible Filter Mask (RW) */
-    volatile u32 reserved;
+	volatile u32 mask;	/* Flexible Filter Mask (RW) */
+	volatile u32 reserved;
 };
 
 /* Flexible Filter Value Table Entry */
 struct e1000_ffvt_entry {
-    volatile u32 value;    /* Flexible Filter Value (RW) */
-    volatile u32 reserved;
+	volatile u32 value;	/* Flexible Filter Value (RW) */
+	volatile u32 reserved;
 };
 
 /* Four Flexible Filters are supported */
@@ -879,211 +799,211 @@ struct e1000_ffvt_entry {
  * R/clr - register is read only and is cleared when read
  * A - register array
  */
-#define E1000_CTRL     0x00000  /* Device Control - RW */
-#define E1000_CTRL_DUP 0x00004  /* Device Control Duplicate (Shadow) - RW */
-#define E1000_STATUS   0x00008  /* Device Status - RO */
-#define E1000_EECD     0x00010  /* EEPROM/Flash Control - RW */
-#define E1000_EERD     0x00014  /* EEPROM Read - RW */
-#define E1000_CTRL_EXT 0x00018  /* Extended Device Control - RW */
-#define E1000_FLA      0x0001C  /* Flash Access - RW */
-#define E1000_MDIC     0x00020  /* MDI Control - RW */
-#define E1000_SCTL     0x00024  /* SerDes Control - RW */
-#define E1000_FEXTNVM  0x00028  /* Future Extended NVM register */
-#define E1000_FCAL     0x00028  /* Flow Control Address Low - RW */
-#define E1000_FCAH     0x0002C  /* Flow Control Address High -RW */
-#define E1000_FCT      0x00030  /* Flow Control Type - RW */
-#define E1000_VET      0x00038  /* VLAN Ether Type - RW */
-#define E1000_ICR      0x000C0  /* Interrupt Cause Read - R/clr */
-#define E1000_ITR      0x000C4  /* Interrupt Throttling Rate - RW */
-#define E1000_ICS      0x000C8  /* Interrupt Cause Set - WO */
-#define E1000_IMS      0x000D0  /* Interrupt Mask Set - RW */
-#define E1000_IMC      0x000D8  /* Interrupt Mask Clear - WO */
-#define E1000_IAM      0x000E0  /* Interrupt Acknowledge Auto Mask */
-#define E1000_RCTL     0x00100  /* RX Control - RW */
-#define E1000_RDTR1    0x02820  /* RX Delay Timer (1) - RW */
-#define E1000_RDBAL1   0x02900  /* RX Descriptor Base Address Low (1) - RW */
-#define E1000_RDBAH1   0x02904  /* RX Descriptor Base Address High (1) - RW */
-#define E1000_RDLEN1   0x02908  /* RX Descriptor Length (1) - RW */
-#define E1000_RDH1     0x02910  /* RX Descriptor Head (1) - RW */
-#define E1000_RDT1     0x02918  /* RX Descriptor Tail (1) - RW */
-#define E1000_FCTTV    0x00170  /* Flow Control Transmit Timer Value - RW */
-#define E1000_TXCW     0x00178  /* TX Configuration Word - RW */
-#define E1000_RXCW     0x00180  /* RX Configuration Word - RO */
-#define E1000_TCTL     0x00400  /* TX Control - RW */
-#define E1000_TCTL_EXT 0x00404  /* Extended TX Control - RW */
-#define E1000_TIPG     0x00410  /* TX Inter-packet gap -RW */
-#define E1000_TBT      0x00448  /* TX Burst Timer - RW */
-#define E1000_AIT      0x00458  /* Adaptive Interframe Spacing Throttle - RW */
-#define E1000_LEDCTL   0x00E00  /* LED Control - RW */
-#define E1000_EXTCNF_CTRL  0x00F00  /* Extended Configuration Control */
-#define E1000_EXTCNF_SIZE  0x00F08  /* Extended Configuration Size */
-#define E1000_PHY_CTRL     0x00F10  /* PHY Control Register in CSR */
+#define E1000_CTRL     0x00000	/* Device Control - RW */
+#define E1000_CTRL_DUP 0x00004	/* Device Control Duplicate (Shadow) - RW */
+#define E1000_STATUS   0x00008	/* Device Status - RO */
+#define E1000_EECD     0x00010	/* EEPROM/Flash Control - RW */
+#define E1000_EERD     0x00014	/* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018	/* Extended Device Control - RW */
+#define E1000_FLA      0x0001C	/* Flash Access - RW */
+#define E1000_MDIC     0x00020	/* MDI Control - RW */
+#define E1000_SCTL     0x00024	/* SerDes Control - RW */
+#define E1000_FEXTNVM  0x00028	/* Future Extended NVM register */
+#define E1000_FCAL     0x00028	/* Flow Control Address Low - RW */
+#define E1000_FCAH     0x0002C	/* Flow Control Address High -RW */
+#define E1000_FCT      0x00030	/* Flow Control Type - RW */
+#define E1000_VET      0x00038	/* VLAN Ether Type - RW */
+#define E1000_ICR      0x000C0	/* Interrupt Cause Read - R/clr */
+#define E1000_ITR      0x000C4	/* Interrupt Throttling Rate - RW */
+#define E1000_ICS      0x000C8	/* Interrupt Cause Set - WO */
+#define E1000_IMS      0x000D0	/* Interrupt Mask Set - RW */
+#define E1000_IMC      0x000D8	/* Interrupt Mask Clear - WO */
+#define E1000_IAM      0x000E0	/* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL     0x00100	/* RX Control - RW */
+#define E1000_RDTR1    0x02820	/* RX Delay Timer (1) - RW */
+#define E1000_RDBAL1   0x02900	/* RX Descriptor Base Address Low (1) - RW */
+#define E1000_RDBAH1   0x02904	/* RX Descriptor Base Address High (1) - RW */
+#define E1000_RDLEN1   0x02908	/* RX Descriptor Length (1) - RW */
+#define E1000_RDH1     0x02910	/* RX Descriptor Head (1) - RW */
+#define E1000_RDT1     0x02918	/* RX Descriptor Tail (1) - RW */
+#define E1000_FCTTV    0x00170	/* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW     0x00178	/* TX Configuration Word - RW */
+#define E1000_RXCW     0x00180	/* RX Configuration Word - RO */
+#define E1000_TCTL     0x00400	/* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404	/* Extended TX Control - RW */
+#define E1000_TIPG     0x00410	/* TX Inter-packet gap -RW */
+#define E1000_TBT      0x00448	/* TX Burst Timer - RW */
+#define E1000_AIT      0x00458	/* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL   0x00E00	/* LED Control - RW */
+#define E1000_EXTCNF_CTRL  0x00F00	/* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE  0x00F08	/* Extended Configuration Size */
+#define E1000_PHY_CTRL     0x00F10	/* PHY Control Register in CSR */
 #define FEXTNVM_SW_CONFIG  0x0001
-#define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
-#define E1000_PBS      0x01008  /* Packet Buffer Size */
-#define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
+#define E1000_PBA      0x01000	/* Packet Buffer Allocation - RW */
+#define E1000_PBS      0x01008	/* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010	/* MNG EEprom Control */
 #define E1000_FLASH_UPDATES 1000
-#define E1000_EEARBC   0x01024  /* EEPROM Auto Read Bus Control */
-#define E1000_FLASHT   0x01028  /* FLASH Timer Register */
-#define E1000_EEWR     0x0102C  /* EEPROM Write Register - RW */
-#define E1000_FLSWCTL  0x01030  /* FLASH control register */
-#define E1000_FLSWDATA 0x01034  /* FLASH data register */
-#define E1000_FLSWCNT  0x01038  /* FLASH Access Counter */
-#define E1000_FLOP     0x0103C  /* FLASH Opcode Register */
-#define E1000_ERT      0x02008  /* Early Rx Threshold - RW */
-#define E1000_FCRTL    0x02160  /* Flow Control Receive Threshold Low - RW */
-#define E1000_FCRTH    0x02168  /* Flow Control Receive Threshold High - RW */
-#define E1000_PSRCTL   0x02170  /* Packet Split Receive Control - RW */
-#define E1000_RDBAL    0x02800  /* RX Descriptor Base Address Low - RW */
-#define E1000_RDBAH    0x02804  /* RX Descriptor Base Address High - RW */
-#define E1000_RDLEN    0x02808  /* RX Descriptor Length - RW */
-#define E1000_RDH      0x02810  /* RX Descriptor Head - RW */
-#define E1000_RDT      0x02818  /* RX Descriptor Tail - RW */
-#define E1000_RDTR     0x02820  /* RX Delay Timer - RW */
-#define E1000_RDBAL0   E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
-#define E1000_RDBAH0   E1000_RDBAH /* RX Desc Base Address High (0) - RW */
-#define E1000_RDLEN0   E1000_RDLEN /* RX Desc Length (0) - RW */
-#define E1000_RDH0     E1000_RDH   /* RX Desc Head (0) - RW */
-#define E1000_RDT0     E1000_RDT   /* RX Desc Tail (0) - RW */
-#define E1000_RDTR0    E1000_RDTR  /* RX Delay Timer (0) - RW */
-#define E1000_RXDCTL   0x02828  /* RX Descriptor Control queue 0 - RW */
-#define E1000_RXDCTL1  0x02928  /* RX Descriptor Control queue 1 - RW */
-#define E1000_RADV     0x0282C  /* RX Interrupt Absolute Delay Timer - RW */
-#define E1000_RSRPD    0x02C00  /* RX Small Packet Detect - RW */
-#define E1000_RAID     0x02C08  /* Receive Ack Interrupt Delay - RW */
-#define E1000_TXDMAC   0x03000  /* TX DMA Control - RW */
-#define E1000_KABGTXD  0x03004  /* AFE Band Gap Transmit Ref Data */
-#define E1000_TDFH     0x03410  /* TX Data FIFO Head - RW */
-#define E1000_TDFT     0x03418  /* TX Data FIFO Tail - RW */
-#define E1000_TDFHS    0x03420  /* TX Data FIFO Head Saved - RW */
-#define E1000_TDFTS    0x03428  /* TX Data FIFO Tail Saved - RW */
-#define E1000_TDFPC    0x03430  /* TX Data FIFO Packet Count - RW */
-#define E1000_TDBAL    0x03800  /* TX Descriptor Base Address Low - RW */
-#define E1000_TDBAH    0x03804  /* TX Descriptor Base Address High - RW */
-#define E1000_TDLEN    0x03808  /* TX Descriptor Length - RW */
-#define E1000_TDH      0x03810  /* TX Descriptor Head - RW */
-#define E1000_TDT      0x03818  /* TX Descripotr Tail - RW */
-#define E1000_TIDV     0x03820  /* TX Interrupt Delay Value - RW */
-#define E1000_TXDCTL   0x03828  /* TX Descriptor Control - RW */
-#define E1000_TADV     0x0382C  /* TX Interrupt Absolute Delay Val - RW */
-#define E1000_TSPMT    0x03830  /* TCP Segmentation PAD & Min Threshold - RW */
-#define E1000_TARC0    0x03840  /* TX Arbitration Count (0) */
-#define E1000_TDBAL1   0x03900  /* TX Desc Base Address Low (1) - RW */
-#define E1000_TDBAH1   0x03904  /* TX Desc Base Address High (1) - RW */
-#define E1000_TDLEN1   0x03908  /* TX Desc Length (1) - RW */
-#define E1000_TDH1     0x03910  /* TX Desc Head (1) - RW */
-#define E1000_TDT1     0x03918  /* TX Desc Tail (1) - RW */
-#define E1000_TXDCTL1  0x03928  /* TX Descriptor Control (1) - RW */
-#define E1000_TARC1    0x03940  /* TX Arbitration Count (1) */
-#define E1000_CRCERRS  0x04000  /* CRC Error Count - R/clr */
-#define E1000_ALGNERRC 0x04004  /* Alignment Error Count - R/clr */
-#define E1000_SYMERRS  0x04008  /* Symbol Error Count - R/clr */
-#define E1000_RXERRC   0x0400C  /* Receive Error Count - R/clr */
-#define E1000_MPC      0x04010  /* Missed Packet Count - R/clr */
-#define E1000_SCC      0x04014  /* Single Collision Count - R/clr */
-#define E1000_ECOL     0x04018  /* Excessive Collision Count - R/clr */
-#define E1000_MCC      0x0401C  /* Multiple Collision Count - R/clr */
-#define E1000_LATECOL  0x04020  /* Late Collision Count - R/clr */
-#define E1000_COLC     0x04028  /* Collision Count - R/clr */
-#define E1000_DC       0x04030  /* Defer Count - R/clr */
-#define E1000_TNCRS    0x04034  /* TX-No CRS - R/clr */
-#define E1000_SEC      0x04038  /* Sequence Error Count - R/clr */
-#define E1000_CEXTERR  0x0403C  /* Carrier Extension Error Count - R/clr */
-#define E1000_RLEC     0x04040  /* Receive Length Error Count - R/clr */
-#define E1000_XONRXC   0x04048  /* XON RX Count - R/clr */
-#define E1000_XONTXC   0x0404C  /* XON TX Count - R/clr */
-#define E1000_XOFFRXC  0x04050  /* XOFF RX Count - R/clr */
-#define E1000_XOFFTXC  0x04054  /* XOFF TX Count - R/clr */
-#define E1000_FCRUC    0x04058  /* Flow Control RX Unsupported Count- R/clr */
-#define E1000_PRC64    0x0405C  /* Packets RX (64 bytes) - R/clr */
-#define E1000_PRC127   0x04060  /* Packets RX (65-127 bytes) - R/clr */
-#define E1000_PRC255   0x04064  /* Packets RX (128-255 bytes) - R/clr */
-#define E1000_PRC511   0x04068  /* Packets RX (255-511 bytes) - R/clr */
-#define E1000_PRC1023  0x0406C  /* Packets RX (512-1023 bytes) - R/clr */
-#define E1000_PRC1522  0x04070  /* Packets RX (1024-1522 bytes) - R/clr */
-#define E1000_GPRC     0x04074  /* Good Packets RX Count - R/clr */
-#define E1000_BPRC     0x04078  /* Broadcast Packets RX Count - R/clr */
-#define E1000_MPRC     0x0407C  /* Multicast Packets RX Count - R/clr */
-#define E1000_GPTC     0x04080  /* Good Packets TX Count - R/clr */
-#define E1000_GORCL    0x04088  /* Good Octets RX Count Low - R/clr */
-#define E1000_GORCH    0x0408C  /* Good Octets RX Count High - R/clr */
-#define E1000_GOTCL    0x04090  /* Good Octets TX Count Low - R/clr */
-#define E1000_GOTCH    0x04094  /* Good Octets TX Count High - R/clr */
-#define E1000_RNBC     0x040A0  /* RX No Buffers Count - R/clr */
-#define E1000_RUC      0x040A4  /* RX Undersize Count - R/clr */
-#define E1000_RFC      0x040A8  /* RX Fragment Count - R/clr */
-#define E1000_ROC      0x040AC  /* RX Oversize Count - R/clr */
-#define E1000_RJC      0x040B0  /* RX Jabber Count - R/clr */
-#define E1000_MGTPRC   0x040B4  /* Management Packets RX Count - R/clr */
-#define E1000_MGTPDC   0x040B8  /* Management Packets Dropped Count - R/clr */
-#define E1000_MGTPTC   0x040BC  /* Management Packets TX Count - R/clr */
-#define E1000_TORL     0x040C0  /* Total Octets RX Low - R/clr */
-#define E1000_TORH     0x040C4  /* Total Octets RX High - R/clr */
-#define E1000_TOTL     0x040C8  /* Total Octets TX Low - R/clr */
-#define E1000_TOTH     0x040CC  /* Total Octets TX High - R/clr */
-#define E1000_TPR      0x040D0  /* Total Packets RX - R/clr */
-#define E1000_TPT      0x040D4  /* Total Packets TX - R/clr */
-#define E1000_PTC64    0x040D8  /* Packets TX (64 bytes) - R/clr */
-#define E1000_PTC127   0x040DC  /* Packets TX (65-127 bytes) - R/clr */
-#define E1000_PTC255   0x040E0  /* Packets TX (128-255 bytes) - R/clr */
-#define E1000_PTC511   0x040E4  /* Packets TX (256-511 bytes) - R/clr */
-#define E1000_PTC1023  0x040E8  /* Packets TX (512-1023 bytes) - R/clr */
-#define E1000_PTC1522  0x040EC  /* Packets TX (1024-1522 Bytes) - R/clr */
-#define E1000_MPTC     0x040F0  /* Multicast Packets TX Count - R/clr */
-#define E1000_BPTC     0x040F4  /* Broadcast Packets TX Count - R/clr */
-#define E1000_TSCTC    0x040F8  /* TCP Segmentation Context TX - R/clr */
-#define E1000_TSCTFC   0x040FC  /* TCP Segmentation Context TX Fail - R/clr */
-#define E1000_IAC      0x04100  /* Interrupt Assertion Count */
-#define E1000_ICRXPTC  0x04104  /* Interrupt Cause Rx Packet Timer Expire Count */
-#define E1000_ICRXATC  0x04108  /* Interrupt Cause Rx Absolute Timer Expire Count */
-#define E1000_ICTXPTC  0x0410C  /* Interrupt Cause Tx Packet Timer Expire Count */
-#define E1000_ICTXATC  0x04110  /* Interrupt Cause Tx Absolute Timer Expire Count */
-#define E1000_ICTXQEC  0x04118  /* Interrupt Cause Tx Queue Empty Count */
-#define E1000_ICTXQMTC 0x0411C  /* Interrupt Cause Tx Queue Minimum Threshold Count */
-#define E1000_ICRXDMTC 0x04120  /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
-#define E1000_ICRXOC   0x04124  /* Interrupt Cause Receiver Overrun Count */
-#define E1000_RXCSUM   0x05000  /* RX Checksum Control - RW */
-#define E1000_RFCTL    0x05008  /* Receive Filter Control*/
-#define E1000_MTA      0x05200  /* Multicast Table Array - RW Array */
-#define E1000_RA       0x05400  /* Receive Address - RW Array */
-#define E1000_VFTA     0x05600  /* VLAN Filter Table Array - RW Array */
-#define E1000_WUC      0x05800  /* Wakeup Control - RW */
-#define E1000_WUFC     0x05808  /* Wakeup Filter Control - RW */
-#define E1000_WUS      0x05810  /* Wakeup Status - RO */
-#define E1000_MANC     0x05820  /* Management Control - RW */
-#define E1000_IPAV     0x05838  /* IP Address Valid - RW */
-#define E1000_IP4AT    0x05840  /* IPv4 Address Table - RW Array */
-#define E1000_IP6AT    0x05880  /* IPv6 Address Table - RW Array */
-#define E1000_WUPL     0x05900  /* Wakeup Packet Length - RW */
-#define E1000_WUPM     0x05A00  /* Wakeup Packet Memory - RO A */
-#define E1000_FFLT     0x05F00  /* Flexible Filter Length Table - RW Array */
-#define E1000_HOST_IF  0x08800  /* Host Interface */
-#define E1000_FFMT     0x09000  /* Flexible Filter Mask Table - RW Array */
-#define E1000_FFVT     0x09800  /* Flexible Filter Value Table - RW Array */
-
-#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
-#define E1000_MDPHYA     0x0003C  /* PHY address - RW */
-#define E1000_MANC2H     0x05860  /* Managment Control To Host - RW */
-#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
-
-#define E1000_GCR       0x05B00 /* PCI-Ex Control */
-#define E1000_GSCL_1    0x05B10 /* PCI-Ex Statistic Control #1 */
-#define E1000_GSCL_2    0x05B14 /* PCI-Ex Statistic Control #2 */
-#define E1000_GSCL_3    0x05B18 /* PCI-Ex Statistic Control #3 */
-#define E1000_GSCL_4    0x05B1C /* PCI-Ex Statistic Control #4 */
-#define E1000_FACTPS    0x05B30 /* Function Active and Power State to MNG */
-#define E1000_SWSM      0x05B50 /* SW Semaphore */
-#define E1000_FWSM      0x05B54 /* FW Semaphore */
-#define E1000_FFLT_DBG  0x05F04 /* Debug Register */
-#define E1000_HICR      0x08F00 /* Host Inteface Control */
+#define E1000_EEARBC   0x01024	/* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT   0x01028	/* FLASH Timer Register */
+#define E1000_EEWR     0x0102C	/* EEPROM Write Register - RW */
+#define E1000_FLSWCTL  0x01030	/* FLASH control register */
+#define E1000_FLSWDATA 0x01034	/* FLASH data register */
+#define E1000_FLSWCNT  0x01038	/* FLASH Access Counter */
+#define E1000_FLOP     0x0103C	/* FLASH Opcode Register */
+#define E1000_ERT      0x02008	/* Early Rx Threshold - RW */
+#define E1000_FCRTL    0x02160	/* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH    0x02168	/* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL   0x02170	/* Packet Split Receive Control - RW */
+#define E1000_RDBAL    0x02800	/* RX Descriptor Base Address Low - RW */
+#define E1000_RDBAH    0x02804	/* RX Descriptor Base Address High - RW */
+#define E1000_RDLEN    0x02808	/* RX Descriptor Length - RW */
+#define E1000_RDH      0x02810	/* RX Descriptor Head - RW */
+#define E1000_RDT      0x02818	/* RX Descriptor Tail - RW */
+#define E1000_RDTR     0x02820	/* RX Delay Timer - RW */
+#define E1000_RDBAL0   E1000_RDBAL	/* RX Desc Base Address Low (0) - RW */
+#define E1000_RDBAH0   E1000_RDBAH	/* RX Desc Base Address High (0) - RW */
+#define E1000_RDLEN0   E1000_RDLEN	/* RX Desc Length (0) - RW */
+#define E1000_RDH0     E1000_RDH	/* RX Desc Head (0) - RW */
+#define E1000_RDT0     E1000_RDT	/* RX Desc Tail (0) - RW */
+#define E1000_RDTR0    E1000_RDTR	/* RX Delay Timer (0) - RW */
+#define E1000_RXDCTL   0x02828	/* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1  0x02928	/* RX Descriptor Control queue 1 - RW */
+#define E1000_RADV     0x0282C	/* RX Interrupt Absolute Delay Timer - RW */
+#define E1000_RSRPD    0x02C00	/* RX Small Packet Detect - RW */
+#define E1000_RAID     0x02C08	/* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC   0x03000	/* TX DMA Control - RW */
+#define E1000_KABGTXD  0x03004	/* AFE Band Gap Transmit Ref Data */
+#define E1000_TDFH     0x03410	/* TX Data FIFO Head - RW */
+#define E1000_TDFT     0x03418	/* TX Data FIFO Tail - RW */
+#define E1000_TDFHS    0x03420	/* TX Data FIFO Head Saved - RW */
+#define E1000_TDFTS    0x03428	/* TX Data FIFO Tail Saved - RW */
+#define E1000_TDFPC    0x03430	/* TX Data FIFO Packet Count - RW */
+#define E1000_TDBAL    0x03800	/* TX Descriptor Base Address Low - RW */
+#define E1000_TDBAH    0x03804	/* TX Descriptor Base Address High - RW */
+#define E1000_TDLEN    0x03808	/* TX Descriptor Length - RW */
+#define E1000_TDH      0x03810	/* TX Descriptor Head - RW */
+#define E1000_TDT      0x03818	/* TX Descripotr Tail - RW */
+#define E1000_TIDV     0x03820	/* TX Interrupt Delay Value - RW */
+#define E1000_TXDCTL   0x03828	/* TX Descriptor Control - RW */
+#define E1000_TADV     0x0382C	/* TX Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT    0x03830	/* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_TARC0    0x03840	/* TX Arbitration Count (0) */
+#define E1000_TDBAL1   0x03900	/* TX Desc Base Address Low (1) - RW */
+#define E1000_TDBAH1   0x03904	/* TX Desc Base Address High (1) - RW */
+#define E1000_TDLEN1   0x03908	/* TX Desc Length (1) - RW */
+#define E1000_TDH1     0x03910	/* TX Desc Head (1) - RW */
+#define E1000_TDT1     0x03918	/* TX Desc Tail (1) - RW */
+#define E1000_TXDCTL1  0x03928	/* TX Descriptor Control (1) - RW */
+#define E1000_TARC1    0x03940	/* TX Arbitration Count (1) */
+#define E1000_CRCERRS  0x04000	/* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004	/* Alignment Error Count - R/clr */
+#define E1000_SYMERRS  0x04008	/* Symbol Error Count - R/clr */
+#define E1000_RXERRC   0x0400C	/* Receive Error Count - R/clr */
+#define E1000_MPC      0x04010	/* Missed Packet Count - R/clr */
+#define E1000_SCC      0x04014	/* Single Collision Count - R/clr */
+#define E1000_ECOL     0x04018	/* Excessive Collision Count - R/clr */
+#define E1000_MCC      0x0401C	/* Multiple Collision Count - R/clr */
+#define E1000_LATECOL  0x04020	/* Late Collision Count - R/clr */
+#define E1000_COLC     0x04028	/* Collision Count - R/clr */
+#define E1000_DC       0x04030	/* Defer Count - R/clr */
+#define E1000_TNCRS    0x04034	/* TX-No CRS - R/clr */
+#define E1000_SEC      0x04038	/* Sequence Error Count - R/clr */
+#define E1000_CEXTERR  0x0403C	/* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC     0x04040	/* Receive Length Error Count - R/clr */
+#define E1000_XONRXC   0x04048	/* XON RX Count - R/clr */
+#define E1000_XONTXC   0x0404C	/* XON TX Count - R/clr */
+#define E1000_XOFFRXC  0x04050	/* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC  0x04054	/* XOFF TX Count - R/clr */
+#define E1000_FCRUC    0x04058	/* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64    0x0405C	/* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127   0x04060	/* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255   0x04064	/* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511   0x04068	/* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023  0x0406C	/* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522  0x04070	/* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC     0x04074	/* Good Packets RX Count - R/clr */
+#define E1000_BPRC     0x04078	/* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC     0x0407C	/* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC     0x04080	/* Good Packets TX Count - R/clr */
+#define E1000_GORCL    0x04088	/* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH    0x0408C	/* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL    0x04090	/* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH    0x04094	/* Good Octets TX Count High - R/clr */
+#define E1000_RNBC     0x040A0	/* RX No Buffers Count - R/clr */
+#define E1000_RUC      0x040A4	/* RX Undersize Count - R/clr */
+#define E1000_RFC      0x040A8	/* RX Fragment Count - R/clr */
+#define E1000_ROC      0x040AC	/* RX Oversize Count - R/clr */
+#define E1000_RJC      0x040B0	/* RX Jabber Count - R/clr */
+#define E1000_MGTPRC   0x040B4	/* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC   0x040B8	/* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC   0x040BC	/* Management Packets TX Count - R/clr */
+#define E1000_TORL     0x040C0	/* Total Octets RX Low - R/clr */
+#define E1000_TORH     0x040C4	/* Total Octets RX High - R/clr */
+#define E1000_TOTL     0x040C8	/* Total Octets TX Low - R/clr */
+#define E1000_TOTH     0x040CC	/* Total Octets TX High - R/clr */
+#define E1000_TPR      0x040D0	/* Total Packets RX - R/clr */
+#define E1000_TPT      0x040D4	/* Total Packets TX - R/clr */
+#define E1000_PTC64    0x040D8	/* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127   0x040DC	/* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255   0x040E0	/* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511   0x040E4	/* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023  0x040E8	/* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522  0x040EC	/* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC     0x040F0	/* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC     0x040F4	/* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC    0x040F8	/* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC   0x040FC	/* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC      0x04100	/* Interrupt Assertion Count */
+#define E1000_ICRXPTC  0x04104	/* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXATC  0x04108	/* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICTXPTC  0x0410C	/* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXATC  0x04110	/* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXQEC  0x04118	/* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C	/* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120	/* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXOC   0x04124	/* Interrupt Cause Receiver Overrun Count */
+#define E1000_RXCSUM   0x05000	/* RX Checksum Control - RW */
+#define E1000_RFCTL    0x05008	/* Receive Filter Control */
+#define E1000_MTA      0x05200	/* Multicast Table Array - RW Array */
+#define E1000_RA       0x05400	/* Receive Address - RW Array */
+#define E1000_VFTA     0x05600	/* VLAN Filter Table Array - RW Array */
+#define E1000_WUC      0x05800	/* Wakeup Control - RW */
+#define E1000_WUFC     0x05808	/* Wakeup Filter Control - RW */
+#define E1000_WUS      0x05810	/* Wakeup Status - RO */
+#define E1000_MANC     0x05820	/* Management Control - RW */
+#define E1000_IPAV     0x05838	/* IP Address Valid - RW */
+#define E1000_IP4AT    0x05840	/* IPv4 Address Table - RW Array */
+#define E1000_IP6AT    0x05880	/* IPv6 Address Table - RW Array */
+#define E1000_WUPL     0x05900	/* Wakeup Packet Length - RW */
+#define E1000_WUPM     0x05A00	/* Wakeup Packet Memory - RO A */
+#define E1000_FFLT     0x05F00	/* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF  0x08800	/* Host Interface */
+#define E1000_FFMT     0x09000	/* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT     0x09800	/* Flexible Filter Value Table - RW Array */
+
+#define E1000_KUMCTRLSTA 0x00034	/* MAC-PHY interface - RW */
+#define E1000_MDPHYA     0x0003C	/* PHY address - RW */
+#define E1000_MANC2H     0x05860	/* Managment Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C	/* Software-Firmware Synchronization - RW */
+
+#define E1000_GCR       0x05B00	/* PCI-Ex Control */
+#define E1000_GSCL_1    0x05B10	/* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2    0x05B14	/* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3    0x05B18	/* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4    0x05B1C	/* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS    0x05B30	/* Function Active and Power State to MNG */
+#define E1000_SWSM      0x05B50	/* SW Semaphore */
+#define E1000_FWSM      0x05B54	/* FW Semaphore */
+#define E1000_FFLT_DBG  0x05F04	/* Debug Register */
+#define E1000_HICR      0x08F00	/* Host Interface Control */
 
 /* RSS registers */
-#define E1000_CPUVEC    0x02C10 /* CPU Vector Register - RW */
-#define E1000_MRQC      0x05818 /* Multiple Receive Control - RW */
-#define E1000_RETA      0x05C00 /* Redirection Table - RW Array */
-#define E1000_RSSRK     0x05C80 /* RSS Random Key - RW Array */
-#define E1000_RSSIM     0x05864 /* RSS Interrupt Mask */
-#define E1000_RSSIR     0x05868 /* RSS Interrupt Request */
+#define E1000_CPUVEC    0x02C10	/* CPU Vector Register - RW */
+#define E1000_MRQC      0x05818	/* Multiple Receive Control - RW */
+#define E1000_RETA      0x05C00	/* Redirection Table - RW Array */
+#define E1000_RSSRK     0x05C80	/* RSS Random Key - RW Array */
+#define E1000_RSSIM     0x05864	/* RSS Interrupt Mask */
+#define E1000_RSSIR     0x05868	/* RSS Interrupt Request */
 /* Register Set (82542)
  *
  * Some of the 82542 registers are located at different offsets than they are
@@ -1123,19 +1043,19 @@ struct e1000_ffvt_entry {
 #define E1000_82542_RDLEN0   E1000_82542_RDLEN
 #define E1000_82542_RDH0     E1000_82542_RDH
 #define E1000_82542_RDT0     E1000_82542_RDT
-#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
-                                                       * RX Control - RW */
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8))	/* Split and Replication
+							 * RX Control - RW */
 #define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
-#define E1000_82542_RDBAH3   0x02B04 /* RX Desc Base High Queue 3 - RW */
-#define E1000_82542_RDBAL3   0x02B00 /* RX Desc Low Queue 3 - RW */
-#define E1000_82542_RDLEN3   0x02B08 /* RX Desc Length Queue 3 - RW */
-#define E1000_82542_RDH3     0x02B10 /* RX Desc Head Queue 3 - RW */
-#define E1000_82542_RDT3     0x02B18 /* RX Desc Tail Queue 3 - RW */
-#define E1000_82542_RDBAL2   0x02A00 /* RX Desc Base Low Queue 2 - RW */
-#define E1000_82542_RDBAH2   0x02A04 /* RX Desc Base High Queue 2 - RW */
-#define E1000_82542_RDLEN2   0x02A08 /* RX Desc Length Queue 2 - RW */
-#define E1000_82542_RDH2     0x02A10 /* RX Desc Head Queue 2 - RW */
-#define E1000_82542_RDT2     0x02A18 /* RX Desc Tail Queue 2 - RW */
+#define E1000_82542_RDBAH3   0x02B04	/* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3   0x02B00	/* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3   0x02B08	/* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3     0x02B10	/* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3     0x02B18	/* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2   0x02A00	/* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2   0x02A04	/* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2   0x02A08	/* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2     0x02A10	/* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2     0x02A18	/* RX Desc Tail Queue 2 - RW */
 #define E1000_82542_RDTR1    0x00130
 #define E1000_82542_RDBAL1   0x00138
 #define E1000_82542_RDBAH1   0x0013C
@@ -1302,288 +1222,281 @@ struct e1000_ffvt_entry {
 #define E1000_82542_RSSIR       E1000_RSSIR
 #define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
 #define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
-#define E1000_82542_MANC2H      E1000_MANC2H
 
 /* Statistics counters collected by the MAC */
 struct e1000_hw_stats {
-	u64		crcerrs;
-	u64		algnerrc;
-	u64		symerrs;
-	u64		rxerrc;
-	u64		txerrc;
-	u64		mpc;
-	u64		scc;
-	u64		ecol;
-	u64		mcc;
-	u64		latecol;
-	u64		colc;
-	u64		dc;
-	u64		tncrs;
-	u64		sec;
-	u64		cexterr;
-	u64		rlec;
-	u64		xonrxc;
-	u64		xontxc;
-	u64		xoffrxc;
-	u64		xofftxc;
-	u64		fcruc;
-	u64		prc64;
-	u64		prc127;
-	u64		prc255;
-	u64		prc511;
-	u64		prc1023;
-	u64		prc1522;
-	u64		gprc;
-	u64		bprc;
-	u64		mprc;
-	u64		gptc;
-	u64		gorcl;
-	u64		gorch;
-	u64		gotcl;
-	u64		gotch;
-	u64		rnbc;
-	u64		ruc;
-	u64		rfc;
-	u64		roc;
-	u64		rlerrc;
-	u64		rjc;
-	u64		mgprc;
-	u64		mgpdc;
-	u64		mgptc;
-	u64		torl;
-	u64		torh;
-	u64		totl;
-	u64		toth;
-	u64		tpr;
-	u64		tpt;
-	u64		ptc64;
-	u64		ptc127;
-	u64		ptc255;
-	u64		ptc511;
-	u64		ptc1023;
-	u64		ptc1522;
-	u64		mptc;
-	u64		bptc;
-	u64		tsctc;
-	u64		tsctfc;
-	u64		iac;
-	u64		icrxptc;
-	u64		icrxatc;
-	u64		ictxptc;
-	u64		ictxatc;
-	u64		ictxqec;
-	u64		ictxqmtc;
-	u64		icrxdmtc;
-	u64		icrxoc;
+	u64 crcerrs;
+	u64 algnerrc;
+	u64 symerrs;
+	u64 rxerrc;
+	u64 txerrc;
+	u64 mpc;
+	u64 scc;
+	u64 ecol;
+	u64 mcc;
+	u64 latecol;
+	u64 colc;
+	u64 dc;
+	u64 tncrs;
+	u64 sec;
+	u64 cexterr;
+	u64 rlec;
+	u64 xonrxc;
+	u64 xontxc;
+	u64 xoffrxc;
+	u64 xofftxc;
+	u64 fcruc;
+	u64 prc64;
+	u64 prc127;
+	u64 prc255;
+	u64 prc511;
+	u64 prc1023;
+	u64 prc1522;
+	u64 gprc;
+	u64 bprc;
+	u64 mprc;
+	u64 gptc;
+	u64 gorcl;
+	u64 gorch;
+	u64 gotcl;
+	u64 gotch;
+	u64 rnbc;
+	u64 ruc;
+	u64 rfc;
+	u64 roc;
+	u64 rlerrc;
+	u64 rjc;
+	u64 mgprc;
+	u64 mgpdc;
+	u64 mgptc;
+	u64 torl;
+	u64 torh;
+	u64 totl;
+	u64 toth;
+	u64 tpr;
+	u64 tpt;
+	u64 ptc64;
+	u64 ptc127;
+	u64 ptc255;
+	u64 ptc511;
+	u64 ptc1023;
+	u64 ptc1522;
+	u64 mptc;
+	u64 bptc;
+	u64 tsctc;
+	u64 tsctfc;
+	u64 iac;
+	u64 icrxptc;
+	u64 icrxatc;
+	u64 ictxptc;
+	u64 ictxatc;
+	u64 ictxqec;
+	u64 ictxqmtc;
+	u64 icrxdmtc;
+	u64 icrxoc;
 };
 
 /* Structure containing variables used by the shared code (e1000_hw.c) */
 struct e1000_hw {
-	u8 __iomem		*hw_addr;
-	u8 __iomem		*flash_address;
-	e1000_mac_type		mac_type;
-	e1000_phy_type		phy_type;
-	u32		phy_init_script;
-	e1000_media_type	media_type;
-	void			*back;
-	struct e1000_shadow_ram	*eeprom_shadow_ram;
-	u32		flash_bank_size;
-	u32		flash_base_addr;
-	e1000_fc_type		fc;
-	e1000_bus_speed		bus_speed;
-	e1000_bus_width		bus_width;
-	e1000_bus_type		bus_type;
+	u8 __iomem *hw_addr;
+	u8 __iomem *flash_address;
+	e1000_mac_type mac_type;
+	e1000_phy_type phy_type;
+	u32 phy_init_script;
+	e1000_media_type media_type;
+	void *back;
+	struct e1000_shadow_ram *eeprom_shadow_ram;
+	u32 flash_bank_size;
+	u32 flash_base_addr;
+	e1000_fc_type fc;
+	e1000_bus_speed bus_speed;
+	e1000_bus_width bus_width;
+	e1000_bus_type bus_type;
 	struct e1000_eeprom_info eeprom;
-	e1000_ms_type		master_slave;
-	e1000_ms_type		original_master_slave;
-	e1000_ffe_config	ffe_config_state;
-	u32		asf_firmware_present;
-	u32		eeprom_semaphore_present;
-	u32		swfw_sync_present;
-	u32		swfwhw_semaphore_present;
-	unsigned long		io_base;
-	u32		phy_id;
-	u32		phy_revision;
-	u32		phy_addr;
-	u32		original_fc;
-	u32		txcw;
-	u32		autoneg_failed;
-	u32		max_frame_size;
-	u32		min_frame_size;
-	u32		mc_filter_type;
-	u32		num_mc_addrs;
-	u32		collision_delta;
-	u32		tx_packet_delta;
-	u32		ledctl_default;
-	u32		ledctl_mode1;
-	u32		ledctl_mode2;
-	bool			tx_pkt_filtering;
+	e1000_ms_type master_slave;
+	e1000_ms_type original_master_slave;
+	e1000_ffe_config ffe_config_state;
+	u32 asf_firmware_present;
+	u32 eeprom_semaphore_present;
+	unsigned long io_base;
+	u32 phy_id;
+	u32 phy_revision;
+	u32 phy_addr;
+	u32 original_fc;
+	u32 txcw;
+	u32 autoneg_failed;
+	u32 max_frame_size;
+	u32 min_frame_size;
+	u32 mc_filter_type;
+	u32 num_mc_addrs;
+	u32 collision_delta;
+	u32 tx_packet_delta;
+	u32 ledctl_default;
+	u32 ledctl_mode1;
+	u32 ledctl_mode2;
+	bool tx_pkt_filtering;
 	struct e1000_host_mng_dhcp_cookie mng_cookie;
-	u16		phy_spd_default;
-	u16		autoneg_advertised;
-	u16		pci_cmd_word;
-	u16		fc_high_water;
-	u16		fc_low_water;
-	u16		fc_pause_time;
-	u16		current_ifs_val;
-	u16		ifs_min_val;
-	u16		ifs_max_val;
-	u16		ifs_step_size;
-	u16		ifs_ratio;
-	u16		device_id;
-	u16		vendor_id;
-	u16		subsystem_id;
-	u16		subsystem_vendor_id;
-	u8			revision_id;
-	u8			autoneg;
-	u8			mdix;
-	u8			forced_speed_duplex;
-	u8			wait_autoneg_complete;
-	u8			dma_fairness;
-	u8			mac_addr[NODE_ADDRESS_SIZE];
-	u8			perm_mac_addr[NODE_ADDRESS_SIZE];
-	bool			disable_polarity_correction;
-	bool			speed_downgraded;
-	e1000_smart_speed	smart_speed;
-	e1000_dsp_config	dsp_config_state;
-	bool			get_link_status;
-	bool			serdes_link_down;
-	bool			tbi_compatibility_en;
-	bool			tbi_compatibility_on;
-	bool			laa_is_present;
-	bool			phy_reset_disable;
-	bool			initialize_hw_bits_disable;
-	bool			fc_send_xon;
-	bool			fc_strict_ieee;
-	bool			report_tx_early;
-	bool			adaptive_ifs;
-	bool			ifs_params_forced;
-	bool			in_ifs_mode;
-	bool			mng_reg_access_disabled;
-	bool			leave_av_bit_off;
-	bool			kmrn_lock_loss_workaround_disabled;
-	bool			bad_tx_carr_stats_fd;
-	bool			has_manc2h;
-	bool			rx_needs_kicking;
-	bool			has_smbus;
+	u16 phy_spd_default;
+	u16 autoneg_advertised;
+	u16 pci_cmd_word;
+	u16 fc_high_water;
+	u16 fc_low_water;
+	u16 fc_pause_time;
+	u16 current_ifs_val;
+	u16 ifs_min_val;
+	u16 ifs_max_val;
+	u16 ifs_step_size;
+	u16 ifs_ratio;
+	u16 device_id;
+	u16 vendor_id;
+	u16 subsystem_id;
+	u16 subsystem_vendor_id;
+	u8 revision_id;
+	u8 autoneg;
+	u8 mdix;
+	u8 forced_speed_duplex;
+	u8 wait_autoneg_complete;
+	u8 dma_fairness;
+	u8 mac_addr[NODE_ADDRESS_SIZE];
+	u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+	bool disable_polarity_correction;
+	bool speed_downgraded;
+	e1000_smart_speed smart_speed;
+	e1000_dsp_config dsp_config_state;
+	bool get_link_status;
+	bool serdes_has_link;
+	bool tbi_compatibility_en;
+	bool tbi_compatibility_on;
+	bool laa_is_present;
+	bool phy_reset_disable;
+	bool initialize_hw_bits_disable;
+	bool fc_send_xon;
+	bool fc_strict_ieee;
+	bool report_tx_early;
+	bool adaptive_ifs;
+	bool ifs_params_forced;
+	bool in_ifs_mode;
+	bool mng_reg_access_disabled;
+	bool leave_av_bit_off;
+	bool bad_tx_carr_stats_fd;
+	bool has_smbus;
 };
 
-
-#define E1000_EEPROM_SWDPIN0   0x0001   /* SWDPIN 0 EEPROM Value */
-#define E1000_EEPROM_LED_LOGIC 0x0020   /* Led Logic Word */
-#define E1000_EEPROM_RW_REG_DATA   16   /* Offset to data in EEPROM read/write registers */
-#define E1000_EEPROM_RW_REG_DONE   2    /* Offset to READ/WRITE done bit */
-#define E1000_EEPROM_RW_REG_START  1    /* First bit for telling part to start operation */
-#define E1000_EEPROM_RW_ADDR_SHIFT 2    /* Shift to the address bits */
-#define E1000_EEPROM_POLL_WRITE    1    /* Flag for polling for write complete */
-#define E1000_EEPROM_POLL_READ     0    /* Flag for polling for read complete */
+#define E1000_EEPROM_SWDPIN0   0x0001	/* SWDPIN 0 EEPROM Value */
+#define E1000_EEPROM_LED_LOGIC 0x0020	/* Led Logic Word */
+#define E1000_EEPROM_RW_REG_DATA   16	/* Offset to data in EEPROM read/write registers */
+#define E1000_EEPROM_RW_REG_DONE   2	/* Offset to READ/WRITE done bit */
+#define E1000_EEPROM_RW_REG_START  1	/* First bit for telling part to start operation */
+#define E1000_EEPROM_RW_ADDR_SHIFT 2	/* Shift to the address bits */
+#define E1000_EEPROM_POLL_WRITE    1	/* Flag for polling for write complete */
+#define E1000_EEPROM_POLL_READ     0	/* Flag for polling for read complete */
 /* Register Bit Masks */
 /* Device Control */
-#define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */
-#define E1000_CTRL_BEM      0x00000002  /* Endian Mode.0=little,1=big */
-#define E1000_CTRL_PRIOR    0x00000004  /* Priority on PCI. 0=rx,1=fair */
-#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
-#define E1000_CTRL_LRST     0x00000008  /* Link reset. 0=normal,1=reset */
-#define E1000_CTRL_TME      0x00000010  /* Test mode. 0=normal,1=test */
-#define E1000_CTRL_SLE      0x00000020  /* Serial Link on 0=dis,1=en */
-#define E1000_CTRL_ASDE     0x00000020  /* Auto-speed detect enable */
-#define E1000_CTRL_SLU      0x00000040  /* Set link up (Force Link) */
-#define E1000_CTRL_ILOS     0x00000080  /* Invert Loss-Of Signal */
-#define E1000_CTRL_SPD_SEL  0x00000300  /* Speed Select Mask */
-#define E1000_CTRL_SPD_10   0x00000000  /* Force 10Mb */
-#define E1000_CTRL_SPD_100  0x00000100  /* Force 100Mb */
-#define E1000_CTRL_SPD_1000 0x00000200  /* Force 1Gb */
-#define E1000_CTRL_BEM32    0x00000400  /* Big Endian 32 mode */
-#define E1000_CTRL_FRCSPD   0x00000800  /* Force Speed */
-#define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */
-#define E1000_CTRL_D_UD_EN  0x00002000  /* Dock/Undock enable */
-#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
-#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
-#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
-#define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
-#define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
-#define E1000_CTRL_SWDPIN2  0x00100000  /* SWDPIN 2 value */
-#define E1000_CTRL_SWDPIN3  0x00200000  /* SWDPIN 3 value */
-#define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
-#define E1000_CTRL_SWDPIO1  0x00800000  /* SWDPIN 1 input or output */
-#define E1000_CTRL_SWDPIO2  0x01000000  /* SWDPIN 2 input or output */
-#define E1000_CTRL_SWDPIO3  0x02000000  /* SWDPIN 3 input or output */
-#define E1000_CTRL_RST      0x04000000  /* Global reset */
-#define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */
-#define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */
-#define E1000_CTRL_RTE      0x20000000  /* Routing tag enable */
-#define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
-#define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
-#define E1000_CTRL_SW2FW_INT 0x02000000  /* Initiate an interrupt to manageability engine */
+#define E1000_CTRL_FD       0x00000001	/* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM      0x00000002	/* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR    0x00000004	/* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004	/*Blocks new Master requests */
+#define E1000_CTRL_LRST     0x00000008	/* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME      0x00000010	/* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE      0x00000020	/* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE     0x00000020	/* Auto-speed detect enable */
+#define E1000_CTRL_SLU      0x00000040	/* Set link up (Force Link) */
+#define E1000_CTRL_ILOS     0x00000080	/* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL  0x00000300	/* Speed Select Mask */
+#define E1000_CTRL_SPD_10   0x00000000	/* Force 10Mb */
+#define E1000_CTRL_SPD_100  0x00000100	/* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200	/* Force 1Gb */
+#define E1000_CTRL_BEM32    0x00000400	/* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD   0x00000800	/* Force Speed */
+#define E1000_CTRL_FRCDPX   0x00001000	/* Force Duplex */
+#define E1000_CTRL_D_UD_EN  0x00002000	/* Dock/Undock enable */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000	/* Defined polarity of Dock/Undock indication in SDP[0] */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000	/* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000	/* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0  0x00040000	/* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1  0x00080000	/* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2  0x00100000	/* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3  0x00200000	/* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0  0x00400000	/* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1  0x00800000	/* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2  0x01000000	/* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3  0x02000000	/* SWDPIN 3 input or output */
+#define E1000_CTRL_RST      0x04000000	/* Global reset */
+#define E1000_CTRL_RFCE     0x08000000	/* Receive Flow Control enable */
+#define E1000_CTRL_TFCE     0x10000000	/* Transmit flow control enable */
+#define E1000_CTRL_RTE      0x20000000	/* Routing tag enable */
+#define E1000_CTRL_VME      0x40000000	/* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST  0x80000000	/* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000	/* Initiate an interrupt to manageability engine */
 
 /* Device Status */
-#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
-#define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */
+#define E1000_STATUS_FD         0x00000001	/* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU         0x00000002	/* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK  0x0000000C	/* PCI Function Mask */
 #define E1000_STATUS_FUNC_SHIFT 2
-#define E1000_STATUS_FUNC_0     0x00000000      /* Function 0 */
-#define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */
-#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
-#define E1000_STATUS_TBIMODE    0x00000020      /* TBI mode */
+#define E1000_STATUS_FUNC_0     0x00000000	/* Function 0 */
+#define E1000_STATUS_FUNC_1     0x00000004	/* Function 1 */
+#define E1000_STATUS_TXOFF      0x00000010	/* transmission paused */
+#define E1000_STATUS_TBIMODE    0x00000020	/* TBI mode */
 #define E1000_STATUS_SPEED_MASK 0x000000C0
-#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
-#define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion
-                                                   by EEPROM/Flash */
-#define E1000_STATUS_ASDV       0x00000300      /* Auto speed detect value */
-#define E1000_STATUS_DOCK_CI    0x00000800      /* Change in Dock/Undock state. Clear on write '0'. */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
-#define E1000_STATUS_MTXCKOK    0x00000400      /* MTX clock running OK */
-#define E1000_STATUS_PCI66      0x00000800      /* In 66Mhz slot */
-#define E1000_STATUS_BUS64      0x00001000      /* In 64 bit slot */
-#define E1000_STATUS_PCIX_MODE  0x00002000      /* PCI-X mode */
-#define E1000_STATUS_PCIX_SPEED 0x0000C000      /* PCI-X bus speed */
-#define E1000_STATUS_BMC_SKU_0  0x00100000 /* BMC USB redirect disabled */
-#define E1000_STATUS_BMC_SKU_1  0x00200000 /* BMC SRAM disabled */
-#define E1000_STATUS_BMC_SKU_2  0x00400000 /* BMC SDRAM disabled */
-#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
-#define E1000_STATUS_BMC_LITE   0x01000000 /* BMC external code execution disabled */
-#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_SPEED_10   0x00000000	/* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100  0x00000040	/* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080	/* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200	/* Lan Init Completion
+						   by EEPROM/Flash */
+#define E1000_STATUS_ASDV       0x00000300	/* Auto speed detect value */
+#define E1000_STATUS_DOCK_CI    0x00000800	/* Change in Dock/Undock state. Clear on write '0'. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000	/* Status of Master requests. */
+#define E1000_STATUS_MTXCKOK    0x00000400	/* MTX clock running OK */
+#define E1000_STATUS_PCI66      0x00000800	/* In 66Mhz slot */
+#define E1000_STATUS_BUS64      0x00001000	/* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE  0x00002000	/* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000	/* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0  0x00100000	/* BMC USB redirect disabled */
+#define E1000_STATUS_BMC_SKU_1  0x00200000	/* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2  0x00400000	/* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000	/* BMC crypto disabled */
+#define E1000_STATUS_BMC_LITE   0x01000000	/* BMC external code execution disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000	/* RGMII disabled */
 #define E1000_STATUS_FUSE_8       0x04000000
 #define E1000_STATUS_FUSE_9       0x08000000
-#define E1000_STATUS_SERDES0_DIS  0x10000000 /* SERDES disabled on port 0 */
-#define E1000_STATUS_SERDES1_DIS  0x20000000 /* SERDES disabled on port 1 */
+#define E1000_STATUS_SERDES0_DIS  0x10000000	/* SERDES disabled on port 0 */
+#define E1000_STATUS_SERDES1_DIS  0x20000000	/* SERDES disabled on port 1 */
 
-/* Constants used to intrepret the masked PCI-X bus speed. */
-#define E1000_STATUS_PCIX_SPEED_66  0x00000000 /* PCI-X bus speed  50-66 MHz */
-#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed  66-100 MHz */
-#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
+/* Constants used to interpret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66  0x00000000	/* PCI-X bus speed  50-66 MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000	/* PCI-X bus speed  66-100 MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000	/* PCI-X bus speed 100-133 MHz */
 
 /* EEPROM/Flash Control */
-#define E1000_EECD_SK        0x00000001 /* EEPROM Clock */
-#define E1000_EECD_CS        0x00000002 /* EEPROM Chip Select */
-#define E1000_EECD_DI        0x00000004 /* EEPROM Data In */
-#define E1000_EECD_DO        0x00000008 /* EEPROM Data Out */
+#define E1000_EECD_SK        0x00000001	/* EEPROM Clock */
+#define E1000_EECD_CS        0x00000002	/* EEPROM Chip Select */
+#define E1000_EECD_DI        0x00000004	/* EEPROM Data In */
+#define E1000_EECD_DO        0x00000008	/* EEPROM Data Out */
 #define E1000_EECD_FWE_MASK  0x00000030
-#define E1000_EECD_FWE_DIS   0x00000010 /* Disable FLASH writes */
-#define E1000_EECD_FWE_EN    0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_DIS   0x00000010	/* Disable FLASH writes */
+#define E1000_EECD_FWE_EN    0x00000020	/* Enable FLASH writes */
 #define E1000_EECD_FWE_SHIFT 4
-#define E1000_EECD_REQ       0x00000040 /* EEPROM Access Request */
-#define E1000_EECD_GNT       0x00000080 /* EEPROM Access Grant */
-#define E1000_EECD_PRES      0x00000100 /* EEPROM Present */
-#define E1000_EECD_SIZE      0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
-#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
-                                         * (0-small, 1-large) */
-#define E1000_EECD_TYPE      0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
+#define E1000_EECD_REQ       0x00000040	/* EEPROM Access Request */
+#define E1000_EECD_GNT       0x00000080	/* EEPROM Access Grant */
+#define E1000_EECD_PRES      0x00000100	/* EEPROM Present */
+#define E1000_EECD_SIZE      0x00000200	/* EEPROM Size (0=64 word 1=256 word) */
+#define E1000_EECD_ADDR_BITS 0x00000400	/* EEPROM Addressing bits based on type
+					 * (0-small, 1-large) */
+#define E1000_EECD_TYPE      0x00002000	/* EEPROM Type (1-SPI, 0-Microwire) */
 #ifndef E1000_EEPROM_GRANT_ATTEMPTS
-#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#define E1000_EEPROM_GRANT_ATTEMPTS 1000	/* EEPROM # attempts to gain grant */
 #endif
-#define E1000_EECD_AUTO_RD          0x00000200  /* EEPROM Auto Read done */
-#define E1000_EECD_SIZE_EX_MASK     0x00007800  /* EEprom Size */
+#define E1000_EECD_AUTO_RD          0x00000200	/* EEPROM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK     0x00007800	/* EEprom Size */
 #define E1000_EECD_SIZE_EX_SHIFT    11
-#define E1000_EECD_NVADDS    0x00018000 /* NVM Address Size */
-#define E1000_EECD_SELSHAD   0x00020000 /* Select Shadow RAM */
-#define E1000_EECD_INITSRAM  0x00040000 /* Initialize Shadow RAM */
-#define E1000_EECD_FLUPD     0x00080000 /* Update FLASH */
-#define E1000_EECD_AUPDEN    0x00100000 /* Enable Autonomous FLASH update */
-#define E1000_EECD_SHADV     0x00200000 /* Shadow RAM Data Valid */
-#define E1000_EECD_SEC1VAL   0x00400000 /* Sector One Valid */
+#define E1000_EECD_NVADDS    0x00018000	/* NVM Address Size */
+#define E1000_EECD_SELSHAD   0x00020000	/* Select Shadow RAM */
+#define E1000_EECD_INITSRAM  0x00040000	/* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD     0x00080000	/* Update FLASH */
+#define E1000_EECD_AUPDEN    0x00100000	/* Enable Autonomous FLASH update */
+#define E1000_EECD_SHADV     0x00200000	/* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL   0x00400000	/* Sector One Valid */
 #define E1000_EECD_SECVAL_SHIFT      22
 #define E1000_STM_OPCODE     0xDB00
 #define E1000_HICR_FW_RESET  0xC0
@@ -1593,12 +1506,12 @@ struct e1000_hw {
 #define E1000_ICH_NVM_SIG_MASK     0xC0
 
 /* EEPROM Read */
-#define E1000_EERD_START      0x00000001 /* Start Read */
-#define E1000_EERD_DONE       0x00000010 /* Read Done */
+#define E1000_EERD_START      0x00000001	/* Start Read */
+#define E1000_EERD_DONE       0x00000010	/* Read Done */
 #define E1000_EERD_ADDR_SHIFT 8
-#define E1000_EERD_ADDR_MASK  0x0000FF00 /* Read Address */
+#define E1000_EERD_ADDR_MASK  0x0000FF00	/* Read Address */
 #define E1000_EERD_DATA_SHIFT 16
-#define E1000_EERD_DATA_MASK  0xFFFF0000 /* Read Data */
+#define E1000_EERD_DATA_MASK  0xFFFF0000	/* Read Data */
 
 /* SPI EEPROM Status Register */
 #define EEPROM_STATUS_RDY_SPI  0x01
@@ -1608,25 +1521,25 @@ struct e1000_hw {
 #define EEPROM_STATUS_WPEN_SPI 0x80
 
 /* Extended Device Control */
-#define E1000_CTRL_EXT_GPI0_EN   0x00000001 /* Maps SDP4 to GPI0 */
-#define E1000_CTRL_EXT_GPI1_EN   0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_GPI0_EN   0x00000001	/* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN   0x00000002	/* Maps SDP5 to GPI1 */
 #define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
-#define E1000_CTRL_EXT_GPI2_EN   0x00000004 /* Maps SDP6 to GPI2 */
-#define E1000_CTRL_EXT_GPI3_EN   0x00000008 /* Maps SDP7 to GPI3 */
-#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
-#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
+#define E1000_CTRL_EXT_GPI2_EN   0x00000004	/* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN   0x00000008	/* Maps SDP7 to GPI3 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010	/* Value of SW Defineable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020	/* Value of SW Defineable Pin 5 */
 #define E1000_CTRL_EXT_PHY_INT   E1000_CTRL_EXT_SDP5_DATA
-#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
-#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
-#define E1000_CTRL_EXT_SDP4_DIR  0x00000100 /* Direction of SDP4 0=in 1=out */
-#define E1000_CTRL_EXT_SDP5_DIR  0x00000200 /* Direction of SDP5 0=in 1=out */
-#define E1000_CTRL_EXT_SDP6_DIR  0x00000400 /* Direction of SDP6 0=in 1=out */
-#define E1000_CTRL_EXT_SDP7_DIR  0x00000800 /* Direction of SDP7 0=in 1=out */
-#define E1000_CTRL_EXT_ASDCHK    0x00001000 /* Initiate an ASD sequence */
-#define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
-#define E1000_CTRL_EXT_IPS       0x00004000 /* Invert Power State */
-#define E1000_CTRL_EXT_SPD_BYPS  0x00008000 /* Speed Select Bypass */
-#define E1000_CTRL_EXT_RO_DIS    0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040	/* Value of SW Defineable Pin 6 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080	/* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP4_DIR  0x00000100	/* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR  0x00000200	/* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR  0x00000400	/* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP7_DIR  0x00000800	/* Direction of SDP7 0=in 1=out */
+#define E1000_CTRL_EXT_ASDCHK    0x00001000	/* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST    0x00002000	/* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS       0x00004000	/* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS  0x00008000	/* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS    0x00020000	/* Relaxed Ordering disable */
 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
 #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
 #define E1000_CTRL_EXT_LINK_MODE_TBI  0x00C00000
@@ -1638,11 +1551,11 @@ struct e1000_hw {
 #define E1000_CTRL_EXT_WR_WMARK_320   0x01000000
 #define E1000_CTRL_EXT_WR_WMARK_384   0x02000000
 #define E1000_CTRL_EXT_WR_WMARK_448   0x03000000
-#define E1000_CTRL_EXT_DRV_LOAD       0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME           0x08000000 /* Interrupt acknowledge Auto-mask */
-#define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000 /* Clear Interrupt timers after IMS clear */
-#define E1000_CRTL_EXT_PB_PAREN       0x01000000 /* packet buffer parity error detection enabled */
-#define E1000_CTRL_EXT_DF_PAREN       0x02000000 /* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_DRV_LOAD       0x10000000	/* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_IAME           0x08000000	/* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000	/* Clear Interrupt timers after IMS clear */
+#define E1000_CRTL_EXT_PB_PAREN       0x01000000	/* packet buffer parity error detection enabled */
+#define E1000_CTRL_EXT_DF_PAREN       0x02000000	/* descriptor FIFO parity error detection enable */
 #define E1000_CTRL_EXT_GHOST_PAREN    0x40000000
 
 /* MDI Control */
@@ -1742,167 +1655,167 @@ struct e1000_hw {
 #define E1000_LEDCTL_MODE_LED_OFF       0xF
 
 /* Receive Address */
-#define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
+#define E1000_RAH_AV  0x80000000	/* Receive descriptor valid */
 
 /* Interrupt Cause Read */
-#define E1000_ICR_TXDW          0x00000001 /* Transmit desc written back */
-#define E1000_ICR_TXQE          0x00000002 /* Transmit Queue empty */
-#define E1000_ICR_LSC           0x00000004 /* Link Status Change */
-#define E1000_ICR_RXSEQ         0x00000008 /* rx sequence error */
-#define E1000_ICR_RXDMT0        0x00000010 /* rx desc min. threshold (0) */
-#define E1000_ICR_RXO           0x00000040 /* rx overrun */
-#define E1000_ICR_RXT0          0x00000080 /* rx timer intr (ring 0) */
-#define E1000_ICR_MDAC          0x00000200 /* MDIO access complete */
-#define E1000_ICR_RXCFG         0x00000400 /* RX /c/ ordered set */
-#define E1000_ICR_GPI_EN0       0x00000800 /* GP Int 0 */
-#define E1000_ICR_GPI_EN1       0x00001000 /* GP Int 1 */
-#define E1000_ICR_GPI_EN2       0x00002000 /* GP Int 2 */
-#define E1000_ICR_GPI_EN3       0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXDW          0x00000001	/* Transmit desc written back */
+#define E1000_ICR_TXQE          0x00000002	/* Transmit Queue empty */
+#define E1000_ICR_LSC           0x00000004	/* Link Status Change */
+#define E1000_ICR_RXSEQ         0x00000008	/* rx sequence error */
+#define E1000_ICR_RXDMT0        0x00000010	/* rx desc min. threshold (0) */
+#define E1000_ICR_RXO           0x00000040	/* rx overrun */
+#define E1000_ICR_RXT0          0x00000080	/* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC          0x00000200	/* MDIO access complete */
+#define E1000_ICR_RXCFG         0x00000400	/* RX /c/ ordered set */
+#define E1000_ICR_GPI_EN0       0x00000800	/* GP Int 0 */
+#define E1000_ICR_GPI_EN1       0x00001000	/* GP Int 1 */
+#define E1000_ICR_GPI_EN2       0x00002000	/* GP Int 2 */
+#define E1000_ICR_GPI_EN3       0x00004000	/* GP Int 3 */
 #define E1000_ICR_TXD_LOW       0x00008000
 #define E1000_ICR_SRPD          0x00010000
-#define E1000_ICR_ACK           0x00020000 /* Receive Ack frame */
-#define E1000_ICR_MNG           0x00040000 /* Manageability event */
-#define E1000_ICR_DOCK          0x00080000 /* Dock/Undock */
-#define E1000_ICR_INT_ASSERTED  0x80000000 /* If this bit asserted, the driver should claim the interrupt */
-#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_ICR_HOST_ARB_PAR  0x00400000 /* host arb read buffer parity error */
-#define E1000_ICR_PB_PAR        0x00800000 /* packet buffer parity error */
-#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
-#define E1000_ICR_ALL_PARITY    0x03F00000 /* all parity error bits */
-#define E1000_ICR_DSW           0x00000020 /* FW changed the status of DISSW bit in the FWSM */
-#define E1000_ICR_PHYINT        0x00001000 /* LAN connected device generates an interrupt */
-#define E1000_ICR_EPRST         0x00100000 /* ME handware reset occurs */
+#define E1000_ICR_ACK           0x00020000	/* Receive Ack frame */
+#define E1000_ICR_MNG           0x00040000	/* Manageability event */
+#define E1000_ICR_DOCK          0x00080000	/* Dock/Undock */
+#define E1000_ICR_INT_ASSERTED  0x80000000	/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000	/* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000	/* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR  0x00400000	/* host arb read buffer parity error */
+#define E1000_ICR_PB_PAR        0x00800000	/* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000	/* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000	/* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICR_ALL_PARITY    0x03F00000	/* all parity error bits */
+#define E1000_ICR_DSW           0x00000020	/* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT        0x00001000	/* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST         0x00100000	/* ME hardware reset occurs */
 
 /* Interrupt Cause Set */
-#define E1000_ICS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
-#define E1000_ICS_TXQE      E1000_ICR_TXQE      /* Transmit Queue empty */
-#define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */
-#define E1000_ICS_RXSEQ     E1000_ICR_RXSEQ     /* rx sequence error */
-#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
-#define E1000_ICS_RXO       E1000_ICR_RXO       /* rx overrun */
-#define E1000_ICS_RXT0      E1000_ICR_RXT0      /* rx timer intr */
-#define E1000_ICS_MDAC      E1000_ICR_MDAC      /* MDIO access complete */
-#define E1000_ICS_RXCFG     E1000_ICR_RXCFG     /* RX /c/ ordered set */
-#define E1000_ICS_GPI_EN0   E1000_ICR_GPI_EN0   /* GP Int 0 */
-#define E1000_ICS_GPI_EN1   E1000_ICR_GPI_EN1   /* GP Int 1 */
-#define E1000_ICS_GPI_EN2   E1000_ICR_GPI_EN2   /* GP Int 2 */
-#define E1000_ICS_GPI_EN3   E1000_ICR_GPI_EN3   /* GP Int 3 */
+#define E1000_ICS_TXDW      E1000_ICR_TXDW	/* Transmit desc written back */
+#define E1000_ICS_TXQE      E1000_ICR_TXQE	/* Transmit Queue empty */
+#define E1000_ICS_LSC       E1000_ICR_LSC	/* Link Status Change */
+#define E1000_ICS_RXSEQ     E1000_ICR_RXSEQ	/* rx sequence error */
+#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0	/* rx desc min. threshold */
+#define E1000_ICS_RXO       E1000_ICR_RXO	/* rx overrun */
+#define E1000_ICS_RXT0      E1000_ICR_RXT0	/* rx timer intr */
+#define E1000_ICS_MDAC      E1000_ICR_MDAC	/* MDIO access complete */
+#define E1000_ICS_RXCFG     E1000_ICR_RXCFG	/* RX /c/ ordered set */
+#define E1000_ICS_GPI_EN0   E1000_ICR_GPI_EN0	/* GP Int 0 */
+#define E1000_ICS_GPI_EN1   E1000_ICR_GPI_EN1	/* GP Int 1 */
+#define E1000_ICS_GPI_EN2   E1000_ICR_GPI_EN2	/* GP Int 2 */
+#define E1000_ICS_GPI_EN3   E1000_ICR_GPI_EN3	/* GP Int 3 */
 #define E1000_ICS_TXD_LOW   E1000_ICR_TXD_LOW
 #define E1000_ICS_SRPD      E1000_ICR_SRPD
-#define E1000_ICS_ACK       E1000_ICR_ACK       /* Receive Ack frame */
-#define E1000_ICS_MNG       E1000_ICR_MNG       /* Manageability event */
-#define E1000_ICS_DOCK      E1000_ICR_DOCK      /* Dock/Undock */
-#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_ICS_HOST_ARB_PAR  E1000_ICR_HOST_ARB_PAR  /* host arb read buffer parity error */
-#define E1000_ICS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
-#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_ACK       E1000_ICR_ACK	/* Receive Ack frame */
+#define E1000_ICS_MNG       E1000_ICR_MNG	/* Manageability event */
+#define E1000_ICS_DOCK      E1000_ICR_DOCK	/* Dock/Undock */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0	/* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0	/* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICS_HOST_ARB_PAR  E1000_ICR_HOST_ARB_PAR	/* host arb read buffer parity error */
+#define E1000_ICS_PB_PAR        E1000_ICR_PB_PAR	/* packet buffer parity error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1	/* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1	/* queue 1 Tx descriptor FIFO parity error */
 #define E1000_ICS_DSW       E1000_ICR_DSW
 #define E1000_ICS_PHYINT    E1000_ICR_PHYINT
 #define E1000_ICS_EPRST     E1000_ICR_EPRST
 
 /* Interrupt Mask Set */
-#define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
-#define E1000_IMS_TXQE      E1000_ICR_TXQE      /* Transmit Queue empty */
-#define E1000_IMS_LSC       E1000_ICR_LSC       /* Link Status Change */
-#define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* rx sequence error */
-#define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
-#define E1000_IMS_RXO       E1000_ICR_RXO       /* rx overrun */
-#define E1000_IMS_RXT0      E1000_ICR_RXT0      /* rx timer intr */
-#define E1000_IMS_MDAC      E1000_ICR_MDAC      /* MDIO access complete */
-#define E1000_IMS_RXCFG     E1000_ICR_RXCFG     /* RX /c/ ordered set */
-#define E1000_IMS_GPI_EN0   E1000_ICR_GPI_EN0   /* GP Int 0 */
-#define E1000_IMS_GPI_EN1   E1000_ICR_GPI_EN1   /* GP Int 1 */
-#define E1000_IMS_GPI_EN2   E1000_ICR_GPI_EN2   /* GP Int 2 */
-#define E1000_IMS_GPI_EN3   E1000_ICR_GPI_EN3   /* GP Int 3 */
+#define E1000_IMS_TXDW      E1000_ICR_TXDW	/* Transmit desc written back */
+#define E1000_IMS_TXQE      E1000_ICR_TXQE	/* Transmit Queue empty */
+#define E1000_IMS_LSC       E1000_ICR_LSC	/* Link Status Change */
+#define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ	/* rx sequence error */
+#define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0	/* rx desc min. threshold */
+#define E1000_IMS_RXO       E1000_ICR_RXO	/* rx overrun */
+#define E1000_IMS_RXT0      E1000_ICR_RXT0	/* rx timer intr */
+#define E1000_IMS_MDAC      E1000_ICR_MDAC	/* MDIO access complete */
+#define E1000_IMS_RXCFG     E1000_ICR_RXCFG	/* RX /c/ ordered set */
+#define E1000_IMS_GPI_EN0   E1000_ICR_GPI_EN0	/* GP Int 0 */
+#define E1000_IMS_GPI_EN1   E1000_ICR_GPI_EN1	/* GP Int 1 */
+#define E1000_IMS_GPI_EN2   E1000_ICR_GPI_EN2	/* GP Int 2 */
+#define E1000_IMS_GPI_EN3   E1000_ICR_GPI_EN3	/* GP Int 3 */
 #define E1000_IMS_TXD_LOW   E1000_ICR_TXD_LOW
 #define E1000_IMS_SRPD      E1000_ICR_SRPD
-#define E1000_IMS_ACK       E1000_ICR_ACK       /* Receive Ack frame */
-#define E1000_IMS_MNG       E1000_ICR_MNG       /* Manageability event */
-#define E1000_IMS_DOCK      E1000_ICR_DOCK      /* Dock/Undock */
-#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_IMS_HOST_ARB_PAR  E1000_ICR_HOST_ARB_PAR  /* host arb read buffer parity error */
-#define E1000_IMS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
-#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_ACK       E1000_ICR_ACK	/* Receive Ack frame */
+#define E1000_IMS_MNG       E1000_ICR_MNG	/* Manageability event */
+#define E1000_IMS_DOCK      E1000_ICR_DOCK	/* Dock/Undock */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0	/* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0	/* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMS_HOST_ARB_PAR  E1000_ICR_HOST_ARB_PAR	/* host arb read buffer parity error */
+#define E1000_IMS_PB_PAR        E1000_ICR_PB_PAR	/* packet buffer parity error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1	/* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1	/* queue 1 Tx descriptor FIFO parity error */
 #define E1000_IMS_DSW       E1000_ICR_DSW
 #define E1000_IMS_PHYINT    E1000_ICR_PHYINT
 #define E1000_IMS_EPRST     E1000_ICR_EPRST
 
 /* Interrupt Mask Clear */
-#define E1000_IMC_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
-#define E1000_IMC_TXQE      E1000_ICR_TXQE      /* Transmit Queue empty */
-#define E1000_IMC_LSC       E1000_ICR_LSC       /* Link Status Change */
-#define E1000_IMC_RXSEQ     E1000_ICR_RXSEQ     /* rx sequence error */
-#define E1000_IMC_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
-#define E1000_IMC_RXO       E1000_ICR_RXO       /* rx overrun */
-#define E1000_IMC_RXT0      E1000_ICR_RXT0      /* rx timer intr */
-#define E1000_IMC_MDAC      E1000_ICR_MDAC      /* MDIO access complete */
-#define E1000_IMC_RXCFG     E1000_ICR_RXCFG     /* RX /c/ ordered set */
-#define E1000_IMC_GPI_EN0   E1000_ICR_GPI_EN0   /* GP Int 0 */
-#define E1000_IMC_GPI_EN1   E1000_ICR_GPI_EN1   /* GP Int 1 */
-#define E1000_IMC_GPI_EN2   E1000_ICR_GPI_EN2   /* GP Int 2 */
-#define E1000_IMC_GPI_EN3   E1000_ICR_GPI_EN3   /* GP Int 3 */
+#define E1000_IMC_TXDW      E1000_ICR_TXDW	/* Transmit desc written back */
+#define E1000_IMC_TXQE      E1000_ICR_TXQE	/* Transmit Queue empty */
+#define E1000_IMC_LSC       E1000_ICR_LSC	/* Link Status Change */
+#define E1000_IMC_RXSEQ     E1000_ICR_RXSEQ	/* rx sequence error */
+#define E1000_IMC_RXDMT0    E1000_ICR_RXDMT0	/* rx desc min. threshold */
+#define E1000_IMC_RXO       E1000_ICR_RXO	/* rx overrun */
+#define E1000_IMC_RXT0      E1000_ICR_RXT0	/* rx timer intr */
+#define E1000_IMC_MDAC      E1000_ICR_MDAC	/* MDIO access complete */
+#define E1000_IMC_RXCFG     E1000_ICR_RXCFG	/* RX /c/ ordered set */
+#define E1000_IMC_GPI_EN0   E1000_ICR_GPI_EN0	/* GP Int 0 */
+#define E1000_IMC_GPI_EN1   E1000_ICR_GPI_EN1	/* GP Int 1 */
+#define E1000_IMC_GPI_EN2   E1000_ICR_GPI_EN2	/* GP Int 2 */
+#define E1000_IMC_GPI_EN3   E1000_ICR_GPI_EN3	/* GP Int 3 */
 #define E1000_IMC_TXD_LOW   E1000_ICR_TXD_LOW
 #define E1000_IMC_SRPD      E1000_ICR_SRPD
-#define E1000_IMC_ACK       E1000_ICR_ACK       /* Receive Ack frame */
-#define E1000_IMC_MNG       E1000_ICR_MNG       /* Manageability event */
-#define E1000_IMC_DOCK      E1000_ICR_DOCK      /* Dock/Undock */
-#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_IMC_HOST_ARB_PAR  E1000_ICR_HOST_ARB_PAR  /* host arb read buffer parity error */
-#define E1000_IMC_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
-#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_ACK       E1000_ICR_ACK	/* Receive Ack frame */
+#define E1000_IMC_MNG       E1000_ICR_MNG	/* Manageability event */
+#define E1000_IMC_DOCK      E1000_ICR_DOCK	/* Dock/Undock */
+#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0	/* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0	/* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMC_HOST_ARB_PAR  E1000_ICR_HOST_ARB_PAR	/* host arb read buffer parity error */
+#define E1000_IMC_PB_PAR        E1000_ICR_PB_PAR	/* packet buffer parity error */
+#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1	/* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1	/* queue 1 Tx descriptor FIFO parity error */
 #define E1000_IMC_DSW       E1000_ICR_DSW
 #define E1000_IMC_PHYINT    E1000_ICR_PHYINT
 #define E1000_IMC_EPRST     E1000_ICR_EPRST
 
 /* Receive Control */
-#define E1000_RCTL_RST            0x00000001    /* Software reset */
-#define E1000_RCTL_EN             0x00000002    /* enable */
-#define E1000_RCTL_SBP            0x00000004    /* store bad packet */
-#define E1000_RCTL_UPE            0x00000008    /* unicast promiscuous enable */
-#define E1000_RCTL_MPE            0x00000010    /* multicast promiscuous enab */
-#define E1000_RCTL_LPE            0x00000020    /* long packet enable */
-#define E1000_RCTL_LBM_NO         0x00000000    /* no loopback mode */
-#define E1000_RCTL_LBM_MAC        0x00000040    /* MAC loopback mode */
-#define E1000_RCTL_LBM_SLP        0x00000080    /* serial link loopback mode */
-#define E1000_RCTL_LBM_TCVR       0x000000C0    /* tcvr loopback mode */
-#define E1000_RCTL_DTYP_MASK      0x00000C00    /* Descriptor type mask */
-#define E1000_RCTL_DTYP_PS        0x00000400    /* Packet Split descriptor */
-#define E1000_RCTL_RDMTS_HALF     0x00000000    /* rx desc min threshold size */
-#define E1000_RCTL_RDMTS_QUAT     0x00000100    /* rx desc min threshold size */
-#define E1000_RCTL_RDMTS_EIGTH    0x00000200    /* rx desc min threshold size */
-#define E1000_RCTL_MO_SHIFT       12            /* multicast offset shift */
-#define E1000_RCTL_MO_0           0x00000000    /* multicast offset 11:0 */
-#define E1000_RCTL_MO_1           0x00001000    /* multicast offset 12:1 */
-#define E1000_RCTL_MO_2           0x00002000    /* multicast offset 13:2 */
-#define E1000_RCTL_MO_3           0x00003000    /* multicast offset 15:4 */
-#define E1000_RCTL_MDR            0x00004000    /* multicast desc ring 0 */
-#define E1000_RCTL_BAM            0x00008000    /* broadcast enable */
+#define E1000_RCTL_RST            0x00000001	/* Software reset */
+#define E1000_RCTL_EN             0x00000002	/* enable */
+#define E1000_RCTL_SBP            0x00000004	/* store bad packet */
+#define E1000_RCTL_UPE            0x00000008	/* unicast promiscuous enable */
+#define E1000_RCTL_MPE            0x00000010	/* multicast promiscuous enab */
+#define E1000_RCTL_LPE            0x00000020	/* long packet enable */
+#define E1000_RCTL_LBM_NO         0x00000000	/* no loopback mode */
+#define E1000_RCTL_LBM_MAC        0x00000040	/* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP        0x00000080	/* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR       0x000000C0	/* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK      0x00000C00	/* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS        0x00000400	/* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF     0x00000000	/* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_QUAT     0x00000100	/* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_EIGTH    0x00000200	/* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT       12	/* multicast offset shift */
+#define E1000_RCTL_MO_0           0x00000000	/* multicast offset 11:0 */
+#define E1000_RCTL_MO_1           0x00001000	/* multicast offset 12:1 */
+#define E1000_RCTL_MO_2           0x00002000	/* multicast offset 13:2 */
+#define E1000_RCTL_MO_3           0x00003000	/* multicast offset 15:4 */
+#define E1000_RCTL_MDR            0x00004000	/* multicast desc ring 0 */
+#define E1000_RCTL_BAM            0x00008000	/* broadcast enable */
 /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
-#define E1000_RCTL_SZ_2048        0x00000000    /* rx buffer size 2048 */
-#define E1000_RCTL_SZ_1024        0x00010000    /* rx buffer size 1024 */
-#define E1000_RCTL_SZ_512         0x00020000    /* rx buffer size 512 */
-#define E1000_RCTL_SZ_256         0x00030000    /* rx buffer size 256 */
+#define E1000_RCTL_SZ_2048        0x00000000	/* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024        0x00010000	/* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512         0x00020000	/* rx buffer size 512 */
+#define E1000_RCTL_SZ_256         0x00030000	/* rx buffer size 256 */
 /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
-#define E1000_RCTL_SZ_16384       0x00010000    /* rx buffer size 16384 */
-#define E1000_RCTL_SZ_8192        0x00020000    /* rx buffer size 8192 */
-#define E1000_RCTL_SZ_4096        0x00030000    /* rx buffer size 4096 */
-#define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */
-#define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */
-#define E1000_RCTL_CFI            0x00100000    /* canonical form indicator */
-#define E1000_RCTL_DPF            0x00400000    /* discard pause frames */
-#define E1000_RCTL_PMCF           0x00800000    /* pass MAC control frames */
-#define E1000_RCTL_BSEX           0x02000000    /* Buffer size extension */
-#define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */
-#define E1000_RCTL_FLXBUF_MASK    0x78000000    /* Flexible buffer size */
-#define E1000_RCTL_FLXBUF_SHIFT   27            /* Flexible buffer shift */
+#define E1000_RCTL_SZ_16384       0x00010000	/* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192        0x00020000	/* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096        0x00030000	/* rx buffer size 4096 */
+#define E1000_RCTL_VFE            0x00040000	/* vlan filter enable */
+#define E1000_RCTL_CFIEN          0x00080000	/* canonical form enable */
+#define E1000_RCTL_CFI            0x00100000	/* canonical form indicator */
+#define E1000_RCTL_DPF            0x00400000	/* discard pause frames */
+#define E1000_RCTL_PMCF           0x00800000	/* pass MAC control frames */
+#define E1000_RCTL_BSEX           0x02000000	/* Buffer size extension */
+#define E1000_RCTL_SECRC          0x04000000	/* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK    0x78000000	/* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT   27	/* Flexible buffer shift */
 
 /* Use byte values for the following shift parameters
  * Usage:
@@ -1925,10 +1838,10 @@ struct e1000_hw {
 #define E1000_PSRCTL_BSIZE2_MASK   0x003F0000
 #define E1000_PSRCTL_BSIZE3_MASK   0x3F000000
 
-#define E1000_PSRCTL_BSIZE0_SHIFT  7            /* Shift _right_ 7 */
-#define E1000_PSRCTL_BSIZE1_SHIFT  2            /* Shift _right_ 2 */
-#define E1000_PSRCTL_BSIZE2_SHIFT  6            /* Shift _left_ 6 */
-#define E1000_PSRCTL_BSIZE3_SHIFT 14            /* Shift _left_ 14 */
+#define E1000_PSRCTL_BSIZE0_SHIFT  7	/* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT  2	/* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT  6	/* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14	/* Shift _left_ 14 */
 
 /* SW_W_SYNC definitions */
 #define E1000_SWFW_EEP_SM     0x0001
@@ -1937,17 +1850,17 @@ struct e1000_hw {
 #define E1000_SWFW_MAC_CSR_SM 0x0008
 
 /* Receive Descriptor */
-#define E1000_RDT_DELAY 0x0000ffff      /* Delay timer (1=1024us) */
-#define E1000_RDT_FPDB  0x80000000      /* Flush descriptor block */
-#define E1000_RDLEN_LEN 0x0007ff80      /* descriptor length */
-#define E1000_RDH_RDH   0x0000ffff      /* receive descriptor head */
-#define E1000_RDT_RDT   0x0000ffff      /* receive descriptor tail */
+#define E1000_RDT_DELAY 0x0000ffff	/* Delay timer (1=1024us) */
+#define E1000_RDT_FPDB  0x80000000	/* Flush descriptor block */
+#define E1000_RDLEN_LEN 0x0007ff80	/* descriptor length */
+#define E1000_RDH_RDH   0x0000ffff	/* receive descriptor head */
+#define E1000_RDT_RDT   0x0000ffff	/* receive descriptor tail */
 
 /* Flow Control */
-#define E1000_FCRTH_RTH  0x0000FFF8     /* Mask Bits[15:3] for RTH */
-#define E1000_FCRTH_XFCE 0x80000000     /* External Flow Control Enable */
-#define E1000_FCRTL_RTL  0x0000FFF8     /* Mask Bits[15:3] for RTL */
-#define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
+#define E1000_FCRTH_RTH  0x0000FFF8	/* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000	/* External Flow Control Enable */
+#define E1000_FCRTL_RTL  0x0000FFF8	/* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000	/* Enable XON frame transmission */
 
 /* Header split receive */
 #define E1000_RFCTL_ISCSI_DIS           0x00000001
@@ -1967,66 +1880,64 @@ struct e1000_hw {
 #define E1000_RFCTL_NEW_IPV6_EXT_DIS    0x00020000
 
 /* Receive Descriptor Control */
-#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
-#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
-#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
-#define E1000_RXDCTL_GRAN    0x01000000 /* RXDCTL Granularity */
+#define E1000_RXDCTL_PTHRESH 0x0000003F	/* RXDCTL Prefetch Threshold */
+#define E1000_RXDCTL_HTHRESH 0x00003F00	/* RXDCTL Host Threshold */
+#define E1000_RXDCTL_WTHRESH 0x003F0000	/* RXDCTL Writeback Threshold */
+#define E1000_RXDCTL_GRAN    0x01000000	/* RXDCTL Granularity */
 
 /* Transmit Descriptor Control */
-#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
-#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
-#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
-#define E1000_TXDCTL_GRAN    0x01000000 /* TXDCTL Granularity */
-#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
-#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
-#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
-                                              still to be processed. */
+#define E1000_TXDCTL_PTHRESH 0x0000003F	/* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00	/* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000	/* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN    0x01000000	/* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000	/* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000	/* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000	/* Enable the counting of desc.
+						   still to be processed. */
 /* Transmit Configuration Word */
-#define E1000_TXCW_FD         0x00000020        /* TXCW full duplex */
-#define E1000_TXCW_HD         0x00000040        /* TXCW half duplex */
-#define E1000_TXCW_PAUSE      0x00000080        /* TXCW sym pause request */
-#define E1000_TXCW_ASM_DIR    0x00000100        /* TXCW astm pause direction */
-#define E1000_TXCW_PAUSE_MASK 0x00000180        /* TXCW pause request mask */
-#define E1000_TXCW_RF         0x00003000        /* TXCW remote fault */
-#define E1000_TXCW_NP         0x00008000        /* TXCW next page */
-#define E1000_TXCW_CW         0x0000ffff        /* TxConfigWord mask */
-#define E1000_TXCW_TXC        0x40000000        /* Transmit Config control */
-#define E1000_TXCW_ANE        0x80000000        /* Auto-neg enable */
+#define E1000_TXCW_FD         0x00000020	/* TXCW full duplex */
+#define E1000_TXCW_HD         0x00000040	/* TXCW half duplex */
+#define E1000_TXCW_PAUSE      0x00000080	/* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR    0x00000100	/* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180	/* TXCW pause request mask */
+#define E1000_TXCW_RF         0x00003000	/* TXCW remote fault */
+#define E1000_TXCW_NP         0x00008000	/* TXCW next page */
+#define E1000_TXCW_CW         0x0000ffff	/* TxConfigWord mask */
+#define E1000_TXCW_TXC        0x40000000	/* Transmit Config control */
+#define E1000_TXCW_ANE        0x80000000	/* Auto-neg enable */
 
 /* Receive Configuration Word */
-#define E1000_RXCW_CW    0x0000ffff     /* RxConfigWord mask */
-#define E1000_RXCW_NC    0x04000000     /* Receive config no carrier */
-#define E1000_RXCW_IV    0x08000000     /* Receive config invalid */
-#define E1000_RXCW_CC    0x10000000     /* Receive config change */
-#define E1000_RXCW_C     0x20000000     /* Receive config */
-#define E1000_RXCW_SYNCH 0x40000000     /* Receive config synch */
-#define E1000_RXCW_ANC   0x80000000     /* Auto-neg complete */
+#define E1000_RXCW_CW    0x0000ffff	/* RxConfigWord mask */
+#define E1000_RXCW_NC    0x04000000	/* Receive config no carrier */
+#define E1000_RXCW_IV    0x08000000	/* Receive config invalid */
+#define E1000_RXCW_CC    0x10000000	/* Receive config change */
+#define E1000_RXCW_C     0x20000000	/* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000	/* Receive config synch */
+#define E1000_RXCW_ANC   0x80000000	/* Auto-neg complete */
 
 /* Transmit Control */
-#define E1000_TCTL_RST    0x00000001    /* software reset */
-#define E1000_TCTL_EN     0x00000002    /* enable tx */
-#define E1000_TCTL_BCE    0x00000004    /* busy check enable */
-#define E1000_TCTL_PSP    0x00000008    /* pad short packets */
-#define E1000_TCTL_CT     0x00000ff0    /* collision threshold */
-#define E1000_TCTL_COLD   0x003ff000    /* collision distance */
-#define E1000_TCTL_SWXOFF 0x00400000    /* SW Xoff transmission */
-#define E1000_TCTL_PBE    0x00800000    /* Packet Burst Enable */
-#define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */
-#define E1000_TCTL_NRTU   0x02000000    /* No Re-transmit on underrun */
-#define E1000_TCTL_MULR   0x10000000    /* Multiple request support */
+#define E1000_TCTL_RST    0x00000001	/* software reset */
+#define E1000_TCTL_EN     0x00000002	/* enable tx */
+#define E1000_TCTL_BCE    0x00000004	/* busy check enable */
+#define E1000_TCTL_PSP    0x00000008	/* pad short packets */
+#define E1000_TCTL_CT     0x00000ff0	/* collision threshold */
+#define E1000_TCTL_COLD   0x003ff000	/* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000	/* SW Xoff transmission */
+#define E1000_TCTL_PBE    0x00800000	/* Packet Burst Enable */
+#define E1000_TCTL_RTLC   0x01000000	/* Re-transmit on late collision */
+#define E1000_TCTL_NRTU   0x02000000	/* No Re-transmit on underrun */
+#define E1000_TCTL_MULR   0x10000000	/* Multiple request support */
 /* Extended Transmit Control */
-#define E1000_TCTL_EXT_BST_MASK  0x000003FF /* Backoff Slot Time */
-#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
-
-#define DEFAULT_80003ES2LAN_TCTL_EXT_GCEX   0x00010000
+#define E1000_TCTL_EXT_BST_MASK  0x000003FF	/* Backoff Slot Time */
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gigabit Carry Extend Padding */
 
 /* Receive Checksum Control */
-#define E1000_RXCSUM_PCSS_MASK 0x000000FF   /* Packet Checksum Start */
-#define E1000_RXCSUM_IPOFL     0x00000100   /* IPv4 checksum offload */
-#define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_IPV6OFL   0x00000400   /* IPv6 checksum offload */
-#define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */
-#define E1000_RXCSUM_PCSD      0x00002000   /* packet checksum disabled */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF	/* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL     0x00000100	/* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL     0x00000200	/* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL   0x00000400	/* IPv6 checksum offload */
+#define E1000_RXCSUM_IPPCSE    0x00001000	/* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD      0x00002000	/* packet checksum disabled */
 
 /* Multiple Receive Queue Control */
 #define E1000_MRQC_ENABLE_MASK              0x00000003
@@ -2042,141 +1953,141 @@ struct e1000_hw {
 
 /* Definitions for power management and wakeup registers */
 /* Wake Up Control */
-#define E1000_WUC_APME       0x00000001 /* APM Enable */
-#define E1000_WUC_PME_EN     0x00000002 /* PME Enable */
-#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
-#define E1000_WUC_APMPME     0x00000008 /* Assert PME on APM Wakeup */
-#define E1000_WUC_SPM        0x80000000 /* Enable SPM */
+#define E1000_WUC_APME       0x00000001	/* APM Enable */
+#define E1000_WUC_PME_EN     0x00000002	/* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004	/* PME Status */
+#define E1000_WUC_APMPME     0x00000008	/* Assert PME on APM Wakeup */
+#define E1000_WUC_SPM        0x80000000	/* Enable SPM */
 
 /* Wake Up Filter Control */
-#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define E1000_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */
-#define E1000_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
-#define E1000_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */
-#define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
-#define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
-#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
-#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
-#define E1000_WUFC_IGNORE_TCO      0x00008000 /* Ignore WakeOn TCO packets */
-#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
-#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
-#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
-#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
-#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
-#define E1000_WUFC_FLX_OFFSET 16       /* Offset to the Flexible Filters bits */
-#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+#define E1000_WUFC_LNKC 0x00000001	/* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG  0x00000002	/* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX   0x00000004	/* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC   0x00000008	/* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC   0x00000010	/* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP  0x00000020	/* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040	/* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080	/* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO      0x00008000	/* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000	/* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000	/* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000	/* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000	/* Flexible Filter 3 Enable */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF	/* Mask for all wakeup filters */
+#define E1000_WUFC_FLX_OFFSET 16	/* Offset to the Flexible Filters bits */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000	/* Mask for the 4 flexible filters */
 
 /* Wake Up Status */
-#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
-#define E1000_WUS_MAG  0x00000002 /* Magic Packet Received */
-#define E1000_WUS_EX   0x00000004 /* Directed Exact Received */
-#define E1000_WUS_MC   0x00000008 /* Directed Multicast Received */
-#define E1000_WUS_BC   0x00000010 /* Broadcast Received */
-#define E1000_WUS_ARP  0x00000020 /* ARP Request Packet Received */
-#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
-#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
-#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
-#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
-#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
-#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
-#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+#define E1000_WUS_LNKC 0x00000001	/* Link Status Changed */
+#define E1000_WUS_MAG  0x00000002	/* Magic Packet Received */
+#define E1000_WUS_EX   0x00000004	/* Directed Exact Received */
+#define E1000_WUS_MC   0x00000008	/* Directed Multicast Received */
+#define E1000_WUS_BC   0x00000010	/* Broadcast Received */
+#define E1000_WUS_ARP  0x00000020	/* ARP Request Packet Received */
+#define E1000_WUS_IPV4 0x00000040	/* Directed IPv4 Packet Wakeup Received */
+#define E1000_WUS_IPV6 0x00000080	/* Directed IPv6 Packet Wakeup Received */
+#define E1000_WUS_FLX0 0x00010000	/* Flexible Filter 0 Match */
+#define E1000_WUS_FLX1 0x00020000	/* Flexible Filter 1 Match */
+#define E1000_WUS_FLX2 0x00040000	/* Flexible Filter 2 Match */
+#define E1000_WUS_FLX3 0x00080000	/* Flexible Filter 3 Match */
+#define E1000_WUS_FLX_FILTERS 0x000F0000	/* Mask for the 4 flexible filters */
 
 /* Management Control */
-#define E1000_MANC_SMBUS_EN      0x00000001 /* SMBus Enabled - RO */
-#define E1000_MANC_ASF_EN        0x00000002 /* ASF Enabled - RO */
-#define E1000_MANC_R_ON_FORCE    0x00000004 /* Reset on Force TCO - RO */
-#define E1000_MANC_RMCP_EN       0x00000100 /* Enable RCMP 026Fh Filtering */
-#define E1000_MANC_0298_EN       0x00000200 /* Enable RCMP 0298h Filtering */
-#define E1000_MANC_IPV4_EN       0x00000400 /* Enable IPv4 */
-#define E1000_MANC_IPV6_EN       0x00000800 /* Enable IPv6 */
-#define E1000_MANC_SNAP_EN       0x00001000 /* Accept LLC/SNAP */
-#define E1000_MANC_ARP_EN        0x00002000 /* Enable ARP Request Filtering */
-#define E1000_MANC_NEIGHBOR_EN   0x00004000 /* Enable Neighbor Discovery
-                                             * Filtering */
-#define E1000_MANC_ARP_RES_EN    0x00008000 /* Enable ARP response Filtering */
-#define E1000_MANC_TCO_RESET     0x00010000 /* TCO Reset Occurred */
-#define E1000_MANC_RCV_TCO_EN    0x00020000 /* Receive TCO Packets Enabled */
-#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
-#define E1000_MANC_RCV_ALL       0x00080000 /* Receive All Enabled */
-#define E1000_MANC_BLK_PHY_RST_ON_IDE   0x00040000 /* Block phy resets */
-#define E1000_MANC_EN_MAC_ADDR_FILTER   0x00100000 /* Enable MAC address
-                                                    * filtering */
-#define E1000_MANC_EN_MNG2HOST   0x00200000 /* Enable MNG packets to host
-                                             * memory */
-#define E1000_MANC_EN_IP_ADDR_FILTER    0x00400000 /* Enable IP address
-                                                    * filtering */
-#define E1000_MANC_EN_XSUM_FILTER   0x00800000 /* Enable checksum filtering */
-#define E1000_MANC_BR_EN         0x01000000 /* Enable broadcast filtering */
-#define E1000_MANC_SMB_REQ       0x01000000 /* SMBus Request */
-#define E1000_MANC_SMB_GNT       0x02000000 /* SMBus Grant */
-#define E1000_MANC_SMB_CLK_IN    0x04000000 /* SMBus Clock In */
-#define E1000_MANC_SMB_DATA_IN   0x08000000 /* SMBus Data In */
-#define E1000_MANC_SMB_DATA_OUT  0x10000000 /* SMBus Data Out */
-#define E1000_MANC_SMB_CLK_OUT   0x20000000 /* SMBus Clock Out */
-
-#define E1000_MANC_SMB_DATA_OUT_SHIFT  28 /* SMBus Data Out Shift */
-#define E1000_MANC_SMB_CLK_OUT_SHIFT   29 /* SMBus Clock Out Shift */
+#define E1000_MANC_SMBUS_EN      0x00000001	/* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN        0x00000002	/* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE    0x00000004	/* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN       0x00000100	/* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN       0x00000200	/* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN       0x00000400	/* Enable IPv4 */
+#define E1000_MANC_IPV6_EN       0x00000800	/* Enable IPv6 */
+#define E1000_MANC_SNAP_EN       0x00001000	/* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN        0x00002000	/* Enable ARP Request Filtering */
+#define E1000_MANC_NEIGHBOR_EN   0x00004000	/* Enable Neighbor Discovery
+						 * Filtering */
+#define E1000_MANC_ARP_RES_EN    0x00008000	/* Enable ARP response Filtering */
+#define E1000_MANC_TCO_RESET     0x00010000	/* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN    0x00020000	/* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000	/* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL       0x00080000	/* Receive All Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE   0x00040000	/* Block phy resets */
+#define E1000_MANC_EN_MAC_ADDR_FILTER   0x00100000	/* Enable MAC address
+							 * filtering */
+#define E1000_MANC_EN_MNG2HOST   0x00200000	/* Enable MNG packets to host
+						 * memory */
+#define E1000_MANC_EN_IP_ADDR_FILTER    0x00400000	/* Enable IP address
+							 * filtering */
+#define E1000_MANC_EN_XSUM_FILTER   0x00800000	/* Enable checksum filtering */
+#define E1000_MANC_BR_EN         0x01000000	/* Enable broadcast filtering */
+#define E1000_MANC_SMB_REQ       0x01000000	/* SMBus Request */
+#define E1000_MANC_SMB_GNT       0x02000000	/* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN    0x04000000	/* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN   0x08000000	/* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT  0x10000000	/* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT   0x20000000	/* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT  28	/* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT   29	/* SMBus Clock Out Shift */
 
 /* SW Semaphore Register */
-#define E1000_SWSM_SMBI         0x00000001 /* Driver Semaphore bit */
-#define E1000_SWSM_SWESMBI      0x00000002 /* FW Semaphore bit */
-#define E1000_SWSM_WMNG         0x00000004 /* Wake MNG Clock */
-#define E1000_SWSM_DRV_LOAD     0x00000008 /* Driver Loaded Bit */
+#define E1000_SWSM_SMBI         0x00000001	/* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI      0x00000002	/* FW Semaphore bit */
+#define E1000_SWSM_WMNG         0x00000004	/* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD     0x00000008	/* Driver Loaded Bit */
 
 /* FW Semaphore Register */
-#define E1000_FWSM_MODE_MASK    0x0000000E /* FW mode */
+#define E1000_FWSM_MODE_MASK    0x0000000E	/* FW mode */
 #define E1000_FWSM_MODE_SHIFT            1
-#define E1000_FWSM_FW_VALID     0x00008000 /* FW established a valid mode */
+#define E1000_FWSM_FW_VALID     0x00008000	/* FW established a valid mode */
 
-#define E1000_FWSM_RSPCIPHY        0x00000040 /* Reset PHY on PCI reset */
-#define E1000_FWSM_DISSW           0x10000000 /* FW disable SW Write Access */
-#define E1000_FWSM_SKUSEL_MASK     0x60000000 /* LAN SKU select */
+#define E1000_FWSM_RSPCIPHY        0x00000040	/* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW           0x10000000	/* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK     0x60000000	/* LAN SKU select */
 #define E1000_FWSM_SKUEL_SHIFT     29
-#define E1000_FWSM_SKUSEL_EMB      0x0 /* Embedded SKU */
-#define E1000_FWSM_SKUSEL_CONS     0x1 /* Consumer SKU */
-#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
-#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+#define E1000_FWSM_SKUSEL_EMB      0x0	/* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS     0x1	/* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2	/* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3	/* Perf & Copr GbE SKU */
 
 /* FFLT Debug Register */
-#define E1000_FFLT_DBG_INVC     0x00100000 /* Invalid /C/ code handling */
+#define E1000_FFLT_DBG_INVC     0x00100000	/* Invalid /C/ code handling */
 
 typedef enum {
-    e1000_mng_mode_none     = 0,
-    e1000_mng_mode_asf,
-    e1000_mng_mode_pt,
-    e1000_mng_mode_ipmi,
-    e1000_mng_mode_host_interface_only
+	e1000_mng_mode_none = 0,
+	e1000_mng_mode_asf,
+	e1000_mng_mode_pt,
+	e1000_mng_mode_ipmi,
+	e1000_mng_mode_host_interface_only
 } e1000_mng_mode;
 
-/* Host Inteface Control Register */
-#define E1000_HICR_EN           0x00000001  /* Enable Bit - RO */
-#define E1000_HICR_C            0x00000002  /* Driver sets this bit when done
-                                             * to put command in RAM */
-#define E1000_HICR_SV           0x00000004  /* Status Validity */
-#define E1000_HICR_FWR          0x00000080  /* FW reset. Set by the Host */
+/* Host Interface Control Register */
+#define E1000_HICR_EN           0x00000001	/* Enable Bit - RO */
+#define E1000_HICR_C            0x00000002	/* Driver sets this bit when done
+						 * to put command in RAM */
+#define E1000_HICR_SV           0x00000004	/* Status Validity */
+#define E1000_HICR_FWR          0x00000080	/* FW reset. Set by the Host */
 
 /* Host Interface Command Interface - Address range 0x8800-0x8EFF */
-#define E1000_HI_MAX_DATA_LENGTH         252 /* Host Interface data length */
-#define E1000_HI_MAX_BLOCK_BYTE_LENGTH  1792 /* Number of bytes in range */
-#define E1000_HI_MAX_BLOCK_DWORD_LENGTH  448 /* Number of dwords in range */
-#define E1000_HI_COMMAND_TIMEOUT         500 /* Time in ms to process HI command */
+#define E1000_HI_MAX_DATA_LENGTH         252	/* Host Interface data length */
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH  1792	/* Number of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH  448	/* Number of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT         500	/* Time in ms to process HI command */
 
 struct e1000_host_command_header {
-    u8 command_id;
-    u8 command_length;
-    u8 command_options;   /* I/F bits for command, status for return */
-    u8 checksum;
+	u8 command_id;
+	u8 command_length;
+	u8 command_options;	/* I/F bits for command, status for return */
+	u8 checksum;
 };
 struct e1000_host_command_info {
-    struct e1000_host_command_header command_header;  /* Command Head/Command Result Head has 4 bytes */
-    u8 command_data[E1000_HI_MAX_DATA_LENGTH];   /* Command data can length 0..252 */
+	struct e1000_host_command_header command_header;	/* Command Head/Command Result Head has 4 bytes */
+	u8 command_data[E1000_HI_MAX_DATA_LENGTH];	/* Command data can length 0..252 */
 };
 
 /* Host SMB register #0 */
-#define E1000_HSMC0R_CLKIN      0x00000001  /* SMB Clock in */
-#define E1000_HSMC0R_DATAIN     0x00000002  /* SMB Data in */
-#define E1000_HSMC0R_DATAOUT    0x00000004  /* SMB Data out */
-#define E1000_HSMC0R_CLKOUT     0x00000008  /* SMB Clock out */
+#define E1000_HSMC0R_CLKIN      0x00000001	/* SMB Clock in */
+#define E1000_HSMC0R_DATAIN     0x00000002	/* SMB Data in */
+#define E1000_HSMC0R_DATAOUT    0x00000004	/* SMB Data out */
+#define E1000_HSMC0R_CLKOUT     0x00000008	/* SMB Clock out */
 
 /* Host SMB register #1 */
 #define E1000_HSMC1R_CLKIN      E1000_HSMC0R_CLKIN
@@ -2185,10 +2096,10 @@ struct e1000_host_command_info {
 #define E1000_HSMC1R_CLKOUT     E1000_HSMC0R_CLKOUT
 
 /* FW Status Register */
-#define E1000_FWSTS_FWS_MASK    0x000000FF  /* FW Status */
+#define E1000_FWSTS_FWS_MASK    0x000000FF	/* FW Status */
 
 /* Wake Up Packet Length */
-#define E1000_WUPL_LENGTH_MASK 0x0FFF   /* Only the lower 12 bits are valid */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF	/* Only the lower 12 bits are valid */
 
 #define E1000_MDALIGN          4096
 
@@ -2242,24 +2153,24 @@ struct e1000_host_command_info {
 #define PCI_EX_LINK_WIDTH_SHIFT      4
 
 /* EEPROM Commands - Microwire */
-#define EEPROM_READ_OPCODE_MICROWIRE  0x6  /* EEPROM read opcode */
-#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5  /* EEPROM write opcode */
-#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7  /* EEPROM erase opcode */
-#define EEPROM_EWEN_OPCODE_MICROWIRE  0x13 /* EEPROM erase/write enable */
-#define EEPROM_EWDS_OPCODE_MICROWIRE  0x10 /* EEPROM erast/write disable */
+#define EEPROM_READ_OPCODE_MICROWIRE  0x6	/* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5	/* EEPROM write opcode */
+#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7	/* EEPROM erase opcode */
+#define EEPROM_EWEN_OPCODE_MICROWIRE  0x13	/* EEPROM erase/write enable */
+#define EEPROM_EWDS_OPCODE_MICROWIRE  0x10	/* EEPROM erase/write disable */
 
 /* EEPROM Commands - SPI */
-#define EEPROM_MAX_RETRY_SPI        5000 /* Max wait of 5ms, for RDY signal */
-#define EEPROM_READ_OPCODE_SPI      0x03  /* EEPROM read opcode */
-#define EEPROM_WRITE_OPCODE_SPI     0x02  /* EEPROM write opcode */
-#define EEPROM_A8_OPCODE_SPI        0x08  /* opcode bit-3 = address bit-8 */
-#define EEPROM_WREN_OPCODE_SPI      0x06  /* EEPROM set Write Enable latch */
-#define EEPROM_WRDI_OPCODE_SPI      0x04  /* EEPROM reset Write Enable latch */
-#define EEPROM_RDSR_OPCODE_SPI      0x05  /* EEPROM read Status register */
-#define EEPROM_WRSR_OPCODE_SPI      0x01  /* EEPROM write Status register */
-#define EEPROM_ERASE4K_OPCODE_SPI   0x20  /* EEPROM ERASE 4KB */
-#define EEPROM_ERASE64K_OPCODE_SPI  0xD8  /* EEPROM ERASE 64KB */
-#define EEPROM_ERASE256_OPCODE_SPI  0xDB  /* EEPROM ERASE 256B */
+#define EEPROM_MAX_RETRY_SPI        5000	/* Max wait of 5ms, for RDY signal */
+#define EEPROM_READ_OPCODE_SPI      0x03	/* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_SPI     0x02	/* EEPROM write opcode */
+#define EEPROM_A8_OPCODE_SPI        0x08	/* opcode bit-3 = address bit-8 */
+#define EEPROM_WREN_OPCODE_SPI      0x06	/* EEPROM set Write Enable latch */
+#define EEPROM_WRDI_OPCODE_SPI      0x04	/* EEPROM reset Write Enable latch */
+#define EEPROM_RDSR_OPCODE_SPI      0x05	/* EEPROM read Status register */
+#define EEPROM_WRSR_OPCODE_SPI      0x01	/* EEPROM write Status register */
+#define EEPROM_ERASE4K_OPCODE_SPI   0x20	/* EEPROM ERASE 4KB */
+#define EEPROM_ERASE64K_OPCODE_SPI  0xD8	/* EEPROM ERASE 64KB */
+#define EEPROM_ERASE256_OPCODE_SPI  0xDB	/* EEPROM ERASE 256B */
 
 /* EEPROM Size definitions */
 #define EEPROM_WORD_SIZE_SHIFT  6
@@ -2270,7 +2181,7 @@ struct e1000_host_command_info {
 #define EEPROM_COMPAT                 0x0003
 #define EEPROM_ID_LED_SETTINGS        0x0004
 #define EEPROM_VERSION                0x0005
-#define EEPROM_SERDES_AMPLITUDE       0x0006 /* For SERDES output amplitude adjustment. */
+#define EEPROM_SERDES_AMPLITUDE       0x0006	/* For SERDES output amplitude adjustment. */
 #define EEPROM_PHY_CLASS_WORD         0x0007
 #define EEPROM_INIT_CONTROL1_REG      0x000A
 #define EEPROM_INIT_CONTROL2_REG      0x000F
@@ -2283,22 +2194,16 @@ struct e1000_host_command_info {
 #define EEPROM_FLASH_VERSION          0x0032
 #define EEPROM_CHECKSUM_REG           0x003F
 
-#define E1000_EEPROM_CFG_DONE         0x00040000   /* MNG config cycle done */
-#define E1000_EEPROM_CFG_DONE_PORT_1  0x00080000   /* ...for second port */
+#define E1000_EEPROM_CFG_DONE         0x00040000	/* MNG config cycle done */
+#define E1000_EEPROM_CFG_DONE_PORT_1  0x00080000	/* ...for second port */
 
 /* Word definitions for ID LED Settings */
 #define ID_LED_RESERVED_0000 0x0000
 #define ID_LED_RESERVED_FFFF 0xFFFF
-#define ID_LED_RESERVED_82573  0xF746
-#define ID_LED_DEFAULT_82573   0x1811
 #define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2 << 12) | \
                               (ID_LED_OFF1_OFF2 << 8) | \
                               (ID_LED_DEF1_DEF2 << 4) | \
                               (ID_LED_DEF1_DEF2))
-#define ID_LED_DEFAULT_ICH8LAN  ((ID_LED_DEF1_DEF2 << 12) | \
-                                 (ID_LED_DEF1_OFF2 <<  8) | \
-                                 (ID_LED_DEF1_ON2  <<  4) | \
-                                 (ID_LED_DEF1_DEF2))
 #define ID_LED_DEF1_DEF2     0x1
 #define ID_LED_DEF1_ON2      0x2
 #define ID_LED_DEF1_OFF2     0x3
@@ -2313,7 +2218,6 @@ struct e1000_host_command_info {
 #define IGP_ACTIVITY_LED_ENABLE 0x0300
 #define IGP_LED3_MODE           0x07000000
 
-
 /* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
 #define EEPROM_SERDES_AMPLITUDE_MASK  0x000F
 
@@ -2384,11 +2288,8 @@ struct e1000_host_command_info {
 
 #define DEFAULT_82542_TIPG_IPGR2 10
 #define DEFAULT_82543_TIPG_IPGR2 6
-#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
 #define E1000_TIPG_IPGR2_SHIFT  20
 
-#define DEFAULT_80003ES2LAN_TIPG_IPGT_10_100 0x00000009
-#define DEFAULT_80003ES2LAN_TIPG_IPGT_1000   0x00000008
 #define E1000_TXDMAC_DPP 0x00000001
 
 /* Adaptive IFS defines */
@@ -2421,9 +2322,9 @@ struct e1000_host_command_info {
 #define E1000_EXTCNF_CTRL_SWFLAG            0x00000020
 
 /* PBA constants */
-#define E1000_PBA_8K 0x0008    /* 8KB, default Rx allocation */
-#define E1000_PBA_12K 0x000C    /* 12KB, default Rx allocation */
-#define E1000_PBA_16K 0x0010    /* 16KB, default TX allocation */
+#define E1000_PBA_8K 0x0008	/* 8KB, default Rx allocation */
+#define E1000_PBA_12K 0x000C	/* 12KB, default Rx allocation */
+#define E1000_PBA_16K 0x0010	/* 16KB, default TX allocation */
 #define E1000_PBA_20K 0x0014
 #define E1000_PBA_22K 0x0016
 #define E1000_PBA_24K 0x0018
@@ -2432,7 +2333,7 @@ struct e1000_host_command_info {
 #define E1000_PBA_34K 0x0022
 #define E1000_PBA_38K 0x0026
 #define E1000_PBA_40K 0x0028
-#define E1000_PBA_48K 0x0030    /* 48KB, default RX allocation */
+#define E1000_PBA_48K 0x0030	/* 48KB, default RX allocation */
 
 #define E1000_PBS_16K E1000_PBA_16K
 
@@ -2442,9 +2343,9 @@ struct e1000_host_command_info {
 #define FLOW_CONTROL_TYPE         0x8808
 
 /* The historical defaults for the flow control values are given below. */
-#define FC_DEFAULT_HI_THRESH        (0x8000)    /* 32KB */
-#define FC_DEFAULT_LO_THRESH        (0x4000)    /* 16KB */
-#define FC_DEFAULT_TX_TIMER         (0x100)     /* ~130 us */
+#define FC_DEFAULT_HI_THRESH        (0x8000)	/* 32KB */
+#define FC_DEFAULT_LO_THRESH        (0x4000)	/* 16KB */
+#define FC_DEFAULT_TX_TIMER         (0x100)	/* ~130 us */
 
 /* PCIX Config space */
 #define PCIX_COMMAND_REGISTER    0xE6
@@ -2458,7 +2359,6 @@ struct e1000_host_command_info {
 #define PCIX_STATUS_HI_MMRBC_4K      0x3
 #define PCIX_STATUS_HI_MMRBC_2K      0x2
 
-
 /* Number of bits required to shift right the "pause" bits from the
  * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
  */
@@ -2479,14 +2379,11 @@ struct e1000_host_command_info {
  */
 #define ILOS_SHIFT  3
 
-
 #define RECEIVE_BUFFER_ALIGN_SIZE  (256)
 
 /* Number of milliseconds we wait for auto-negotiation to complete */
 #define LINK_UP_TIMEOUT             500
 
-/* Number of 100 microseconds we wait for PCI Express master disable */
-#define MASTER_DISABLE_TIMEOUT      800
 /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
 #define AUTO_READ_DONE_TIMEOUT      10
 /* Number of milliseconds we wait for PHY configuration done after MAC reset */
@@ -2534,7 +2431,6 @@ struct e1000_host_command_info {
           (((length) > (adapter)->min_frame_size) && \
            ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
 
-
 /* Structures, enums, and macros for the PHY */
 
 /* Bit definitions for the Management Data IO (MDIO) and Management Data
@@ -2551,49 +2447,49 @@ struct e1000_host_command_info {
 
 /* PHY 1000 MII Register/Bit Definitions */
 /* PHY Registers defined by IEEE */
-#define PHY_CTRL         0x00 /* Control Register */
-#define PHY_STATUS       0x01 /* Status Regiser */
-#define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
-#define PHY_AUTONEG_EXP  0x06 /* Autoneg Expansion Reg */
-#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
-#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
-#define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-#define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
-
-#define MAX_PHY_REG_ADDRESS        0x1F  /* 5 bit address bus (0-0x1F) */
-#define MAX_PHY_MULTI_PAGE_REG     0xF   /* Registers equal on all pages */
+#define PHY_CTRL         0x00	/* Control Register */
+#define PHY_STATUS       0x01	/* Status Register */
+#define PHY_ID1          0x02	/* Phy Id Reg (word 1) */
+#define PHY_ID2          0x03	/* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV  0x04	/* Autoneg Advertisement */
+#define PHY_LP_ABILITY   0x05	/* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP  0x06	/* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07	/* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08	/* Link Partner Next Page */
+#define PHY_1000T_CTRL   0x09	/* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A	/* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS   0x0F	/* Extended Status Reg */
+
+#define MAX_PHY_REG_ADDRESS        0x1F	/* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG     0xF	/* Registers equal on all pages */
 
 /* M88E1000 Specific Registers */
-#define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
-#define M88E1000_PHY_SPEC_STATUS   0x11  /* PHY Specific Status Register */
-#define M88E1000_INT_ENABLE        0x12  /* Interrupt Enable Register */
-#define M88E1000_INT_STATUS        0x13  /* Interrupt Status Register */
-#define M88E1000_EXT_PHY_SPEC_CTRL 0x14  /* Extended PHY Specific Control */
-#define M88E1000_RX_ERR_CNTR       0x15  /* Receive Error Counter */
-
-#define M88E1000_PHY_EXT_CTRL      0x1A  /* PHY extend control register */
-#define M88E1000_PHY_PAGE_SELECT   0x1D  /* Reg 29 for page number setting */
-#define M88E1000_PHY_GEN_CONTROL   0x1E  /* Its meaning depends on reg 29 */
-#define M88E1000_PHY_VCO_REG_BIT8  0x100 /* Bits 8 & 11 are adjusted for */
-#define M88E1000_PHY_VCO_REG_BIT11 0x800    /* improved BER performance */
+#define M88E1000_PHY_SPEC_CTRL     0x10	/* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS   0x11	/* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE        0x12	/* Interrupt Enable Register */
+#define M88E1000_INT_STATUS        0x13	/* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14	/* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR       0x15	/* Receive Error Counter */
+
+#define M88E1000_PHY_EXT_CTRL      0x1A	/* PHY extend control register */
+#define M88E1000_PHY_PAGE_SELECT   0x1D	/* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL   0x1E	/* Its meaning depends on reg 29 */
+#define M88E1000_PHY_VCO_REG_BIT8  0x100	/* Bits 8 & 11 are adjusted for */
+#define M88E1000_PHY_VCO_REG_BIT11 0x800	/* improved BER performance */
 
 #define IGP01E1000_IEEE_REGS_PAGE  0x0000
 #define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
 #define IGP01E1000_IEEE_FORCE_GIGA      0x0140
 
 /* IGP01E1000 Specific Registers */
-#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
-#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
-#define IGP01E1000_PHY_PORT_CTRL   0x12 /* PHY Specific Control Register */
-#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
-#define IGP01E1000_GMII_FIFO       0x14 /* GMII FIFO Register */
-#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10	/* PHY Specific Port Config Register */
+#define IGP01E1000_PHY_PORT_STATUS 0x11	/* PHY Specific Status Register */
+#define IGP01E1000_PHY_PORT_CTRL   0x12	/* PHY Specific Control Register */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13	/* PHY Link Health Register */
+#define IGP01E1000_GMII_FIFO       0x14	/* GMII FIFO Register */
+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15	/* PHY Channel Quality Register */
 #define IGP02E1000_PHY_POWER_MGMT      0x19
-#define IGP01E1000_PHY_PAGE_SELECT     0x1F /* PHY Page Select Core Register */
+#define IGP01E1000_PHY_PAGE_SELECT     0x1F	/* PHY Page Select Core Register */
 
 /* IGP01E1000 AGC Registers - stores the cable length values*/
 #define IGP01E1000_PHY_AGC_A        0x1172
@@ -2636,192 +2532,119 @@ struct e1000_host_command_info {
 
 #define IGP01E1000_ANALOG_REGS_PAGE  0x20C0
 
-/* Bits...
- * 15-5: page
- * 4-0: register offset
- */
-#define GG82563_PAGE_SHIFT        5
-#define GG82563_REG(page, reg)    \
-        (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
-#define GG82563_MIN_ALT_REG       30
-
-/* GG82563 Specific Registers */
-#define GG82563_PHY_SPEC_CTRL           \
-        GG82563_REG(0, 16) /* PHY Specific Control */
-#define GG82563_PHY_SPEC_STATUS         \
-        GG82563_REG(0, 17) /* PHY Specific Status */
-#define GG82563_PHY_INT_ENABLE          \
-        GG82563_REG(0, 18) /* Interrupt Enable */
-#define GG82563_PHY_SPEC_STATUS_2       \
-        GG82563_REG(0, 19) /* PHY Specific Status 2 */
-#define GG82563_PHY_RX_ERR_CNTR         \
-        GG82563_REG(0, 21) /* Receive Error Counter */
-#define GG82563_PHY_PAGE_SELECT         \
-        GG82563_REG(0, 22) /* Page Select */
-#define GG82563_PHY_SPEC_CTRL_2         \
-        GG82563_REG(0, 26) /* PHY Specific Control 2 */
-#define GG82563_PHY_PAGE_SELECT_ALT     \
-        GG82563_REG(0, 29) /* Alternate Page Select */
-#define GG82563_PHY_TEST_CLK_CTRL       \
-        GG82563_REG(0, 30) /* Test Clock Control (use reg. 29 to select) */
-
-#define GG82563_PHY_MAC_SPEC_CTRL       \
-        GG82563_REG(2, 21) /* MAC Specific Control Register */
-#define GG82563_PHY_MAC_SPEC_CTRL_2     \
-        GG82563_REG(2, 26) /* MAC Specific Control 2 */
-
-#define GG82563_PHY_DSP_DISTANCE    \
-        GG82563_REG(5, 26) /* DSP Distance */
-
-/* Page 193 - Port Control Registers */
-#define GG82563_PHY_KMRN_MODE_CTRL   \
-        GG82563_REG(193, 16) /* Kumeran Mode Control */
-#define GG82563_PHY_PORT_RESET          \
-        GG82563_REG(193, 17) /* Port Reset */
-#define GG82563_PHY_REVISION_ID         \
-        GG82563_REG(193, 18) /* Revision ID */
-#define GG82563_PHY_DEVICE_ID           \
-        GG82563_REG(193, 19) /* Device ID */
-#define GG82563_PHY_PWR_MGMT_CTRL       \
-        GG82563_REG(193, 20) /* Power Management Control */
-#define GG82563_PHY_RATE_ADAPT_CTRL     \
-        GG82563_REG(193, 25) /* Rate Adaptation Control */
-
-/* Page 194 - KMRN Registers */
-#define GG82563_PHY_KMRN_FIFO_CTRL_STAT \
-        GG82563_REG(194, 16) /* FIFO's Control/Status */
-#define GG82563_PHY_KMRN_CTRL           \
-        GG82563_REG(194, 17) /* Control */
-#define GG82563_PHY_INBAND_CTRL         \
-        GG82563_REG(194, 18) /* Inband Control */
-#define GG82563_PHY_KMRN_DIAGNOSTIC     \
-        GG82563_REG(194, 19) /* Diagnostic */
-#define GG82563_PHY_ACK_TIMEOUTS        \
-        GG82563_REG(194, 20) /* Acknowledge Timeouts */
-#define GG82563_PHY_ADV_ABILITY         \
-        GG82563_REG(194, 21) /* Advertised Ability */
-#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY \
-        GG82563_REG(194, 23) /* Link Partner Advertised Ability */
-#define GG82563_PHY_ADV_NEXT_PAGE       \
-        GG82563_REG(194, 24) /* Advertised Next Page */
-#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE \
-        GG82563_REG(194, 25) /* Link Partner Advertised Next page */
-#define GG82563_PHY_KMRN_MISC           \
-        GG82563_REG(194, 26) /* Misc. */
-
 /* PHY Control Register */
-#define MII_CR_SPEED_SELECT_MSB 0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_COLL_TEST_ENABLE 0x0080  /* Collision test enable */
-#define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
-#define MII_CR_ISOLATE          0x0400  /* Isolate PHY from MII */
-#define MII_CR_POWER_DOWN       0x0800  /* Power down */
-#define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
-#define MII_CR_SPEED_SELECT_LSB 0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_SELECT_MSB 0x0040	/* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080	/* Collision test enable */
+#define MII_CR_FULL_DUPLEX      0x0100	/* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200	/* Restart auto negotiation */
+#define MII_CR_ISOLATE          0x0400	/* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN       0x0800	/* Power down */
+#define MII_CR_AUTO_NEG_EN      0x1000	/* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000	/* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK         0x4000	/* 0 = normal, 1 = loopback */
+#define MII_CR_RESET            0x8000	/* 0 = normal, 1 = PHY reset */
 
 /* PHY Status Register */
-#define MII_SR_EXTENDED_CAPS     0x0001 /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT     0x0002 /* Jabber Detected */
-#define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS      0x0008 /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT      0x0010 /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS   0x0100 /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS     0x0200 /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS     0x0400 /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS       0x0800 /* 10T   Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS       0x1000 /* 10T   Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS      0x2000 /* 100X  Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS      0x4000 /* 100X  Full Duplex Capable */
-#define MII_SR_100T4_CAPS        0x8000 /* 100T4 Capable */
+#define MII_SR_EXTENDED_CAPS     0x0001	/* Extended register capabilities */
+#define MII_SR_JABBER_DETECT     0x0002	/* Jabber Detected */
+#define MII_SR_LINK_STATUS       0x0004	/* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS      0x0008	/* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT      0x0010	/* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE  0x0020	/* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040	/* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS   0x0100	/* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS     0x0200	/* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS     0x0400	/* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS       0x0800	/* 10T   Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS       0x1000	/* 10T   Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS      0x2000	/* 100X  Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS      0x4000	/* 100X  Full Duplex Capable */
+#define MII_SR_100T4_CAPS        0x8000	/* 100T4 Capable */
 
 /* Autoneg Advertisement Register */
-#define NWAY_AR_SELECTOR_FIELD 0x0001   /* indicates IEEE 802.3 CSMA/CD */
-#define NWAY_AR_10T_HD_CAPS    0x0020   /* 10T   Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS    0x0040   /* 10T   Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS  0x0080   /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS  0x0100   /* 100TX Full Duplex Capable */
-#define NWAY_AR_100T4_CAPS     0x0200   /* 100T4 Capable */
-#define NWAY_AR_PAUSE          0x0400   /* Pause operation desired */
-#define NWAY_AR_ASM_DIR        0x0800   /* Asymmetric Pause Direction bit */
-#define NWAY_AR_REMOTE_FAULT   0x2000   /* Remote Fault detected */
-#define NWAY_AR_NEXT_PAGE      0x8000   /* Next Page ability supported */
+#define NWAY_AR_SELECTOR_FIELD 0x0001	/* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS    0x0020	/* 10T   Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS    0x0040	/* 10T   Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS  0x0080	/* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS  0x0100	/* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS     0x0200	/* 100T4 Capable */
+#define NWAY_AR_PAUSE          0x0400	/* Pause operation desired */
+#define NWAY_AR_ASM_DIR        0x0800	/* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT   0x2000	/* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE      0x8000	/* Next Page ability supported */
 
 /* Link Partner Ability Register (Base Page) */
-#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
-#define NWAY_LPAR_10T_HD_CAPS    0x0020 /* LP is 10T   Half Duplex Capable */
-#define NWAY_LPAR_10T_FD_CAPS    0x0040 /* LP is 10T   Full Duplex Capable */
-#define NWAY_LPAR_100TX_HD_CAPS  0x0080 /* LP is 100TX Half Duplex Capable */
-#define NWAY_LPAR_100TX_FD_CAPS  0x0100 /* LP is 100TX Full Duplex Capable */
-#define NWAY_LPAR_100T4_CAPS     0x0200 /* LP is 100T4 Capable */
-#define NWAY_LPAR_PAUSE          0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR        0x0800 /* LP Asymmetric Pause Direction bit */
-#define NWAY_LPAR_REMOTE_FAULT   0x2000 /* LP has detected Remote Fault */
-#define NWAY_LPAR_ACKNOWLEDGE    0x4000 /* LP has rx'd link code word */
-#define NWAY_LPAR_NEXT_PAGE      0x8000 /* Next Page ability supported */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000	/* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS    0x0020	/* LP is 10T   Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS    0x0040	/* LP is 10T   Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS  0x0080	/* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS  0x0100	/* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS     0x0200	/* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE          0x0400	/* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR        0x0800	/* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT   0x2000	/* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE    0x4000	/* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE      0x8000	/* Next Page ability supported */
 
 /* Autoneg Expansion Register */
-#define NWAY_ER_LP_NWAY_CAPS      0x0001 /* LP has Auto Neg Capability */
-#define NWAY_ER_PAGE_RXD          0x0002 /* LP is 10T   Half Duplex Capable */
-#define NWAY_ER_NEXT_PAGE_CAPS    0x0004 /* LP is 10T   Full Duplex Capable */
-#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
-#define NWAY_ER_PAR_DETECT_FAULT  0x0010 /* LP is 100TX Full Duplex Capable */
+#define NWAY_ER_LP_NWAY_CAPS      0x0001	/* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD          0x0002	/* LP is 10T   Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS    0x0004	/* LP is 10T   Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008	/* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT  0x0010	/* LP is 100TX Full Duplex Capable */
 
 /* Next Page TX Register */
-#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define NPTX_TOGGLE         0x0800 /* Toggles between exchanges
-                                    * of different NP
-                                    */
-#define NPTX_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
-                                    * 0 = cannot comply with msg
-                                    */
-#define NPTX_MSG_PAGE       0x2000 /* formatted(1)/unformatted(0) pg */
-#define NPTX_NEXT_PAGE      0x8000 /* 1 = addition NP will follow
-                                    * 0 = sending last NP
-                                    */
+#define NPTX_MSG_CODE_FIELD 0x0001	/* NP msg code or unformatted data */
+#define NPTX_TOGGLE         0x0800	/* Toggles between exchanges
+					 * of different NP
+					 */
+#define NPTX_ACKNOWLDGE2    0x1000	/* 1 = will comply with msg
+					 * 0 = cannot comply with msg
+					 */
+#define NPTX_MSG_PAGE       0x2000	/* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE      0x8000	/* 1 = addition NP will follow
+					 * 0 = sending last NP
+					 */
 
 /* Link Partner Next Page Register */
-#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define LP_RNPR_TOGGLE         0x0800 /* Toggles between exchanges
-                                       * of different NP
-                                       */
-#define LP_RNPR_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
-                                       * 0 = cannot comply with msg
-                                       */
-#define LP_RNPR_MSG_PAGE       0x2000  /* formatted(1)/unformatted(0) pg */
-#define LP_RNPR_ACKNOWLDGE     0x4000  /* 1 = ACK / 0 = NO ACK */
-#define LP_RNPR_NEXT_PAGE      0x8000  /* 1 = addition NP will follow
-                                        * 0 = sending last NP
-                                        */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001	/* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE         0x0800	/* Toggles between exchanges
+					 * of different NP
+					 */
+#define LP_RNPR_ACKNOWLDGE2    0x1000	/* 1 = will comply with msg
+					 * 0 = cannot comply with msg
+					 */
+#define LP_RNPR_MSG_PAGE       0x2000	/* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE     0x4000	/* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE      0x8000	/* 1 = addition NP will follow
+					 * 0 = sending last NP
+					 */
 
 /* 1000BASE-T Control Register */
-#define CR_1000T_ASYM_PAUSE      0x0080 /* Advertise asymmetric pause bit */
-#define CR_1000T_HD_CAPS         0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS         0x0200 /* Advertise 1000T FD capability  */
-#define CR_1000T_REPEATER_DTE    0x0400 /* 1=Repeater/switch device port */
-                                        /* 0=DTE device */
-#define CR_1000T_MS_VALUE        0x0800 /* 1=Configure PHY as Master */
-                                        /* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE       0x1000 /* 1=Master/Slave manual config value */
-                                        /* 0=Automatic Master/Slave config */
-#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
-#define CR_1000T_TEST_MODE_1     0x2000 /* Transmit Waveform test */
-#define CR_1000T_TEST_MODE_2     0x4000 /* Master Transmit Jitter test */
-#define CR_1000T_TEST_MODE_3     0x6000 /* Slave Transmit Jitter test */
-#define CR_1000T_TEST_MODE_4     0x8000 /* Transmitter Distortion test */
+#define CR_1000T_ASYM_PAUSE      0x0080	/* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS         0x0100	/* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS         0x0200	/* Advertise 1000T FD capability  */
+#define CR_1000T_REPEATER_DTE    0x0400	/* 1=Repeater/switch device port */
+					/* 0=DTE device */
+#define CR_1000T_MS_VALUE        0x0800	/* 1=Configure PHY as Master */
+					/* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE       0x1000	/* 1=Master/Slave manual config value */
+					/* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000	/* Normal Operation */
+#define CR_1000T_TEST_MODE_1     0x2000	/* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2     0x4000	/* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3     0x6000	/* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4     0x8000	/* Transmitter Distortion test */
 
 /* 1000BASE-T Status Register */
-#define SR_1000T_IDLE_ERROR_CNT   0x00FF /* Num idle errors since last read */
-#define SR_1000T_ASYM_PAUSE_DIR   0x0100 /* LP asymmetric pause direction bit */
-#define SR_1000T_LP_HD_CAPS       0x0400 /* LP is 1000T HD capable */
-#define SR_1000T_LP_FD_CAPS       0x0800 /* LP is 1000T FD capable */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS  0x2000 /* Local receiver OK */
-#define SR_1000T_MS_CONFIG_RES    0x4000 /* 1=Local TX is Master, 0=Slave */
-#define SR_1000T_MS_CONFIG_FAULT  0x8000 /* Master/Slave config fault */
+#define SR_1000T_IDLE_ERROR_CNT   0x00FF	/* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR   0x0100	/* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS       0x0400	/* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS       0x0800	/* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000	/* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS  0x2000	/* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES    0x4000	/* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT  0x8000	/* Master/Slave config fault */
 #define SR_1000T_REMOTE_RX_STATUS_SHIFT          12
 #define SR_1000T_LOCAL_RX_STATUS_SHIFT           13
 #define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT    5
@@ -2829,64 +2652,64 @@ struct e1000_host_command_info {
 #define FFE_IDLE_ERR_COUNT_TIMEOUT_100           100
 
 /* Extended Status Register */
-#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
-#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
-#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
-#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000	/* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000	/* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000	/* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000	/* 1000X FD capable */
 
-#define PHY_TX_POLARITY_MASK   0x0100 /* register 10h bit 8 (polarity bit) */
-#define PHY_TX_NORMAL_POLARITY 0      /* register 10h bit 8 (normal polarity) */
+#define PHY_TX_POLARITY_MASK   0x0100	/* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0	/* register 10h bit 8 (normal polarity) */
 
-#define AUTO_POLARITY_DISABLE  0x0010 /* register 11h bit 4 */
-                                      /* (0=enable, 1=disable) */
+#define AUTO_POLARITY_DISABLE  0x0010	/* register 11h bit 4 */
+				      /* (0=enable, 1=disable) */
 
 /* M88E1000 PHY Specific Control Register */
-#define M88E1000_PSCR_JABBER_DISABLE    0x0001 /* 1=Jabber Function disabled */
-#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-#define M88E1000_PSCR_SQE_TEST          0x0004 /* 1=SQE Test enabled */
-#define M88E1000_PSCR_CLK125_DISABLE    0x0010 /* 1=CLK125 low,
-                                                * 0=CLK125 toggling
-                                                */
-#define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000  /* MDI Crossover Mode bits 6:5 */
-                                               /* Manual MDI configuration */
-#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020  /* Manual MDIX configuration */
-#define M88E1000_PSCR_AUTO_X_1000T     0x0040  /* 1000BASE-T: Auto crossover,
-                                                *  100BASE-TX/10BASE-T:
-                                                *  MDI Mode
-                                                */
-#define M88E1000_PSCR_AUTO_X_MODE      0x0060  /* Auto crossover enabled
-                                                * all speeds.
-                                                */
+#define M88E1000_PSCR_JABBER_DISABLE    0x0001	/* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002	/* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_SQE_TEST          0x0004	/* 1=SQE Test enabled */
+#define M88E1000_PSCR_CLK125_DISABLE    0x0010	/* 1=CLK125 low,
+						 * 0=CLK125 toggling
+						 */
+#define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000	/* MDI Crossover Mode bits 6:5 */
+					       /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020	/* Manual MDIX configuration */
+#define M88E1000_PSCR_AUTO_X_1000T     0x0040	/* 1000BASE-T: Auto crossover,
+						 *  100BASE-TX/10BASE-T:
+						 *  MDI Mode
+						 */
+#define M88E1000_PSCR_AUTO_X_MODE      0x0060	/* Auto crossover enabled
+						 * all speeds.
+						 */
 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
-                                        /* 1=Enable Extended 10BASE-T distance
-                                         * (Lower 10BASE-T RX Threshold)
-                                         * 0=Normal 10BASE-T RX Threshold */
+					/* 1=Enable Extended 10BASE-T distance
+					 * (Lower 10BASE-T RX Threshold)
+					 * 0=Normal 10BASE-T RX Threshold */
 #define M88E1000_PSCR_MII_5BIT_ENABLE      0x0100
-                                        /* 1=5-Bit interface in 100BASE-TX
-                                         * 0=MII interface in 100BASE-TX */
-#define M88E1000_PSCR_SCRAMBLER_DISABLE    0x0200 /* 1=Scrambler disable */
-#define M88E1000_PSCR_FORCE_LINK_GOOD      0x0400 /* 1=Force link good */
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX     0x0800 /* 1=Assert CRS on Transmit */
+					/* 1=5-Bit interface in 100BASE-TX
+					 * 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_SCRAMBLER_DISABLE    0x0200	/* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD      0x0400	/* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX     0x0800	/* 1=Assert CRS on Transmit */
 
 #define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT    1
 #define M88E1000_PSCR_AUTO_X_MODE_SHIFT          5
 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
 
 /* M88E1000 PHY Specific Status Register */
-#define M88E1000_PSSR_JABBER             0x0001 /* 1=Jabber */
-#define M88E1000_PSSR_REV_POLARITY       0x0002 /* 1=Polarity reversed */
-#define M88E1000_PSSR_DOWNSHIFT          0x0020 /* 1=Downshifted */
-#define M88E1000_PSSR_MDIX               0x0040 /* 1=MDIX; 0=MDI */
-#define M88E1000_PSSR_CABLE_LENGTH       0x0380 /* 0=<50M;1=50-80M;2=80-110M;
-                                            * 3=110-140M;4=>140M */
-#define M88E1000_PSSR_LINK               0x0400 /* 1=Link up, 0=Link down */
-#define M88E1000_PSSR_SPD_DPLX_RESOLVED  0x0800 /* 1=Speed & Duplex resolved */
-#define M88E1000_PSSR_PAGE_RCVD          0x1000 /* 1=Page received */
-#define M88E1000_PSSR_DPLX               0x2000 /* 1=Duplex 0=Half Duplex */
-#define M88E1000_PSSR_SPEED              0xC000 /* Speed, bits 14:15 */
-#define M88E1000_PSSR_10MBS              0x0000 /* 00=10Mbs */
-#define M88E1000_PSSR_100MBS             0x4000 /* 01=100Mbs */
-#define M88E1000_PSSR_1000MBS            0x8000 /* 10=1000Mbs */
+#define M88E1000_PSSR_JABBER             0x0001	/* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY       0x0002	/* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT          0x0020	/* 1=Downshifted */
+#define M88E1000_PSSR_MDIX               0x0040	/* 1=MDIX; 0=MDI */
+#define M88E1000_PSSR_CABLE_LENGTH       0x0380	/* 0=<50M;1=50-80M;2=80-110M;
+						 * 3=110-140M;4=>140M */
+#define M88E1000_PSSR_LINK               0x0400	/* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED  0x0800	/* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD          0x1000	/* 1=Page received */
+#define M88E1000_PSSR_DPLX               0x2000	/* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED              0xC000	/* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS              0x0000	/* 00=10Mbs */
+#define M88E1000_PSSR_100MBS             0x4000	/* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS            0x8000	/* 10=1000Mbs */
 
 #define M88E1000_PSSR_REV_POLARITY_SHIFT 1
 #define M88E1000_PSSR_DOWNSHIFT_SHIFT    5
@@ -2894,12 +2717,12 @@ struct e1000_host_command_info {
 #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
 
 /* M88E1000 Extended PHY Specific Control Register */
-#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
-#define M88E1000_EPSCR_DOWN_NO_IDLE   0x8000 /* 1=Lost lock detect enabled.
-                                              * Will assert lost lock and bring
-                                              * link down if idle not seen
-                                              * within 1ms in 1000BASE-T
-                                              */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000	/* 1=Fiber loopback */
+#define M88E1000_EPSCR_DOWN_NO_IDLE   0x8000	/* 1=Lost lock detect enabled.
+						 * Will assert lost lock and bring
+						 * link down if idle not seen
+						 * within 1ms in 1000BASE-T
+						 */
 /* Number of times we will attempt to autonegotiate before downshifting if we
  * are the master */
 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
@@ -2914,9 +2737,9 @@ struct e1000_host_command_info {
 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X    0x0100
 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X    0x0200
 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X    0x0300
-#define M88E1000_EPSCR_TX_CLK_2_5     0x0060 /* 2.5 MHz TX_CLK */
-#define M88E1000_EPSCR_TX_CLK_25      0x0070 /* 25  MHz TX_CLK */
-#define M88E1000_EPSCR_TX_CLK_0       0x0000 /* NO  TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_2_5     0x0060	/* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25      0x0070	/* 25  MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0       0x0000	/* NO  TX_CLK */
 
 /* M88EC018 Rev 2 specific DownShift settings */
 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
@@ -2938,18 +2761,18 @@ struct e1000_host_command_info {
 #define IGP01E1000_PSCFR_DISABLE_TRANSMIT      0x2000
 
 /* IGP01E1000 Specific Port Status Register - R/O */
-#define IGP01E1000_PSSR_AUTONEG_FAILED         0x0001 /* RO LH SC */
+#define IGP01E1000_PSSR_AUTONEG_FAILED         0x0001	/* RO LH SC */
 #define IGP01E1000_PSSR_POLARITY_REVERSED      0x0002
 #define IGP01E1000_PSSR_CABLE_LENGTH           0x007C
 #define IGP01E1000_PSSR_FULL_DUPLEX            0x0200
 #define IGP01E1000_PSSR_LINK_UP                0x0400
 #define IGP01E1000_PSSR_MDIX                   0x0800
-#define IGP01E1000_PSSR_SPEED_MASK             0xC000 /* speed bits mask */
+#define IGP01E1000_PSSR_SPEED_MASK             0xC000	/* speed bits mask */
 #define IGP01E1000_PSSR_SPEED_10MBPS           0x4000
 #define IGP01E1000_PSSR_SPEED_100MBPS          0x8000
 #define IGP01E1000_PSSR_SPEED_1000MBPS         0xC000
-#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT     0x0002 /* shift right 2 */
-#define IGP01E1000_PSSR_MDIX_SHIFT             0x000B /* shift right 11 */
+#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT     0x0002	/* shift right 2 */
+#define IGP01E1000_PSSR_MDIX_SHIFT             0x000B	/* shift right 11 */
 
 /* IGP01E1000 Specific Port Control Register - R/W */
 #define IGP01E1000_PSCR_TP_LOOPBACK            0x0010
@@ -2957,16 +2780,16 @@ struct e1000_host_command_info {
 #define IGP01E1000_PSCR_TEN_CRS_SELECT         0x0400
 #define IGP01E1000_PSCR_FLIP_CHIP              0x0800
 #define IGP01E1000_PSCR_AUTO_MDIX              0x1000
-#define IGP01E1000_PSCR_FORCE_MDI_MDIX         0x2000 /* 0-MDI, 1-MDIX */
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX         0x2000	/* 0-MDI, 1-MDIX */
 
 /* IGP01E1000 Specific Port Link Health Register */
 #define IGP01E1000_PLHR_SS_DOWNGRADE           0x8000
 #define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR    0x4000
 #define IGP01E1000_PLHR_MASTER_FAULT           0x2000
 #define IGP01E1000_PLHR_MASTER_RESOLUTION      0x1000
-#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK       0x0800 /* LH */
-#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW   0x0400 /* LH */
-#define IGP01E1000_PLHR_DATA_ERR_1             0x0200 /* LH */
+#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK       0x0800	/* LH */
+#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW   0x0400	/* LH */
+#define IGP01E1000_PLHR_DATA_ERR_1             0x0200	/* LH */
 #define IGP01E1000_PLHR_DATA_ERR_0             0x0100
 #define IGP01E1000_PLHR_AUTONEG_FAULT          0x0040
 #define IGP01E1000_PLHR_AUTONEG_ACTIVE         0x0010
@@ -2981,9 +2804,9 @@ struct e1000_host_command_info {
 #define IGP01E1000_MSE_CHANNEL_B        0x0F00
 #define IGP01E1000_MSE_CHANNEL_A        0xF000
 
-#define IGP02E1000_PM_SPD                         0x0001  /* Smart Power Down */
-#define IGP02E1000_PM_D3_LPLU                     0x0004  /* Enable LPLU in non-D0a modes */
-#define IGP02E1000_PM_D0_LPLU                     0x0002  /* Enable LPLU in D0a mode */
+#define IGP02E1000_PM_SPD                         0x0001	/* Smart Power Down */
+#define IGP02E1000_PM_D3_LPLU                     0x0004	/* Enable LPLU in non-D0a modes */
+#define IGP02E1000_PM_D0_LPLU                     0x0002	/* Enable LPLU in D0a mode */
 
 /* IGP01E1000 DSP reset macros */
 #define DSP_RESET_ENABLE     0x0
@@ -2992,8 +2815,8 @@ struct e1000_host_command_info {
 
 /* IGP01E1000 & IGP02E1000 AGC Registers */
 
-#define IGP01E1000_AGC_LENGTH_SHIFT 7         /* Coarse - 13:11, Fine - 10:7 */
-#define IGP02E1000_AGC_LENGTH_SHIFT 9         /* Coarse - 15:13, Fine - 12:9 */
+#define IGP01E1000_AGC_LENGTH_SHIFT 7	/* Coarse - 13:11, Fine - 10:7 */
+#define IGP02E1000_AGC_LENGTH_SHIFT 9	/* Coarse - 15:13, Fine - 12:9 */
 
 /* IGP02E1000 AGC Register Length 9-bit mask */
 #define IGP02E1000_AGC_LENGTH_MASK  0x7F
@@ -3011,9 +2834,9 @@ struct e1000_host_command_info {
 #define IGP01E1000_PHY_POLARITY_MASK    0x0078
 
 /* IGP01E1000 GMII FIFO Register */
-#define IGP01E1000_GMII_FLEX_SPD               0x10 /* Enable flexible speed
-                                                     * on Link-Up */
-#define IGP01E1000_GMII_SPD                    0x20 /* Enable SPD */
+#define IGP01E1000_GMII_FLEX_SPD               0x10	/* Enable flexible speed
+							 * on Link-Up */
+#define IGP01E1000_GMII_SPD                    0x20	/* Enable SPD */
 
 /* IGP01E1000 Analog Register */
 #define IGP01E1000_ANALOG_SPARE_FUSE_STATUS       0x20D1
@@ -3032,114 +2855,6 @@ struct e1000_host_command_info {
 #define IGP01E1000_ANALOG_FUSE_FINE_1               0x0080
 #define IGP01E1000_ANALOG_FUSE_FINE_10              0x0500
 
-/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
-#define GG82563_PSCR_DISABLE_JABBER             0x0001 /* 1=Disable Jabber */
-#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE  0x0002 /* 1=Polarity Reversal Disabled */
-#define GG82563_PSCR_POWER_DOWN                 0x0004 /* 1=Power Down */
-#define GG82563_PSCR_COPPER_TRANSMITER_DISABLE  0x0008 /* 1=Transmitter Disabled */
-#define GG82563_PSCR_CROSSOVER_MODE_MASK        0x0060
-#define GG82563_PSCR_CROSSOVER_MODE_MDI         0x0000 /* 00=Manual MDI configuration */
-#define GG82563_PSCR_CROSSOVER_MODE_MDIX        0x0020 /* 01=Manual MDIX configuration */
-#define GG82563_PSCR_CROSSOVER_MODE_AUTO        0x0060 /* 11=Automatic crossover */
-#define GG82563_PSCR_ENALBE_EXTENDED_DISTANCE   0x0080 /* 1=Enable Extended Distance */
-#define GG82563_PSCR_ENERGY_DETECT_MASK         0x0300
-#define GG82563_PSCR_ENERGY_DETECT_OFF          0x0000 /* 00,01=Off */
-#define GG82563_PSCR_ENERGY_DETECT_RX           0x0200 /* 10=Sense on Rx only (Energy Detect) */
-#define GG82563_PSCR_ENERGY_DETECT_RX_TM        0x0300 /* 11=Sense and Tx NLP */
-#define GG82563_PSCR_FORCE_LINK_GOOD            0x0400 /* 1=Force Link Good */
-#define GG82563_PSCR_DOWNSHIFT_ENABLE           0x0800 /* 1=Enable Downshift */
-#define GG82563_PSCR_DOWNSHIFT_COUNTER_MASK     0x7000
-#define GG82563_PSCR_DOWNSHIFT_COUNTER_SHIFT    12
-
-/* PHY Specific Status Register (Page 0, Register 17) */
-#define GG82563_PSSR_JABBER                0x0001 /* 1=Jabber */
-#define GG82563_PSSR_POLARITY              0x0002 /* 1=Polarity Reversed */
-#define GG82563_PSSR_LINK                  0x0008 /* 1=Link is Up */
-#define GG82563_PSSR_ENERGY_DETECT         0x0010 /* 1=Sleep, 0=Active */
-#define GG82563_PSSR_DOWNSHIFT             0x0020 /* 1=Downshift */
-#define GG82563_PSSR_CROSSOVER_STATUS      0x0040 /* 1=MDIX, 0=MDI */
-#define GG82563_PSSR_RX_PAUSE_ENABLED      0x0100 /* 1=Receive Pause Enabled */
-#define GG82563_PSSR_TX_PAUSE_ENABLED      0x0200 /* 1=Transmit Pause Enabled */
-#define GG82563_PSSR_LINK_UP               0x0400 /* 1=Link Up */
-#define GG82563_PSSR_SPEED_DUPLEX_RESOLVED 0x0800 /* 1=Resolved */
-#define GG82563_PSSR_PAGE_RECEIVED         0x1000 /* 1=Page Received */
-#define GG82563_PSSR_DUPLEX                0x2000 /* 1-Full-Duplex */
-#define GG82563_PSSR_SPEED_MASK            0xC000
-#define GG82563_PSSR_SPEED_10MBPS          0x0000 /* 00=10Mbps */
-#define GG82563_PSSR_SPEED_100MBPS         0x4000 /* 01=100Mbps */
-#define GG82563_PSSR_SPEED_1000MBPS        0x8000 /* 10=1000Mbps */
-
-/* PHY Specific Status Register 2 (Page 0, Register 19) */
-#define GG82563_PSSR2_JABBER                0x0001 /* 1=Jabber */
-#define GG82563_PSSR2_POLARITY_CHANGED      0x0002 /* 1=Polarity Changed */
-#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */
-#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT   0x0020 /* 1=Downshift Detected */
-#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE  0x0040 /* 1=Crossover Changed */
-#define GG82563_PSSR2_FALSE_CARRIER         0x0100 /* 1=False Carrier */
-#define GG82563_PSSR2_SYMBOL_ERROR          0x0200 /* 1=Symbol Error */
-#define GG82563_PSSR2_LINK_STATUS_CHANGED   0x0400 /* 1=Link Status Changed */
-#define GG82563_PSSR2_AUTO_NEG_COMPLETED    0x0800 /* 1=Auto-Neg Completed */
-#define GG82563_PSSR2_PAGE_RECEIVED         0x1000 /* 1=Page Received */
-#define GG82563_PSSR2_DUPLEX_CHANGED        0x2000 /* 1=Duplex Changed */
-#define GG82563_PSSR2_SPEED_CHANGED         0x4000 /* 1=Speed Changed */
-#define GG82563_PSSR2_AUTO_NEG_ERROR        0x8000 /* 1=Auto-Neg Error */
-
-/* PHY Specific Control Register 2 (Page 0, Register 26) */
-#define GG82563_PSCR2_10BT_POLARITY_FORCE           0x0002 /* 1=Force Negative Polarity */
-#define GG82563_PSCR2_1000MB_TEST_SELECT_MASK       0x000C
-#define GG82563_PSCR2_1000MB_TEST_SELECT_NORMAL     0x0000 /* 00,01=Normal Operation */
-#define GG82563_PSCR2_1000MB_TEST_SELECT_112NS      0x0008 /* 10=Select 112ns Sequence */
-#define GG82563_PSCR2_1000MB_TEST_SELECT_16NS       0x000C /* 11=Select 16ns Sequence */
-#define GG82563_PSCR2_REVERSE_AUTO_NEG              0x2000 /* 1=Reverse Auto-Negotiation */
-#define GG82563_PSCR2_1000BT_DISABLE                0x4000 /* 1=Disable 1000BASE-T */
-#define GG82563_PSCR2_TRANSMITER_TYPE_MASK          0x8000
-#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_B      0x0000 /* 0=Class B */
-#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_A      0x8000 /* 1=Class A */
-
-/* MAC Specific Control Register (Page 2, Register 21) */
-/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
-#define GG82563_MSCR_TX_CLK_MASK                    0x0007
-#define GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ           0x0004
-#define GG82563_MSCR_TX_CLK_100MBPS_25MHZ           0x0005
-#define GG82563_MSCR_TX_CLK_1000MBPS_2_5MHZ         0x0006
-#define GG82563_MSCR_TX_CLK_1000MBPS_25MHZ          0x0007
-
-#define GG82563_MSCR_ASSERT_CRS_ON_TX               0x0010 /* 1=Assert */
-
-/* DSP Distance Register (Page 5, Register 26) */
-#define GG82563_DSPD_CABLE_LENGTH               0x0007 /* 0 = <50M;
-                                                          1 = 50-80M;
-                                                          2 = 80-110M;
-                                                          3 = 110-140M;
-                                                          4 = >140M */
-
-/* Kumeran Mode Control Register (Page 193, Register 16) */
-#define GG82563_KMCR_PHY_LEDS_EN                    0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */
-#define GG82563_KMCR_FORCE_LINK_UP                  0x0040 /* 1=Force Link Up */
-#define GG82563_KMCR_SUPPRESS_SGMII_EPD_EXT         0x0080
-#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT_MASK     0x0400
-#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT          0x0400 /* 1=6.25MHz, 0=0.8MHz */
-#define GG82563_KMCR_PASS_FALSE_CARRIER             0x0800
-
-/* Power Management Control Register (Page 193, Register 20) */
-#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE         0x0001 /* 1=Enalbe SERDES Electrical Idle */
-#define GG82563_PMCR_DISABLE_PORT                   0x0002 /* 1=Disable Port */
-#define GG82563_PMCR_DISABLE_SERDES                 0x0004 /* 1=Disable SERDES */
-#define GG82563_PMCR_REVERSE_AUTO_NEG               0x0008 /* 1=Enable Reverse Auto-Negotiation */
-#define GG82563_PMCR_DISABLE_1000_NON_D0            0x0010 /* 1=Disable 1000Mbps Auto-Neg in non D0 */
-#define GG82563_PMCR_DISABLE_1000                   0x0020 /* 1=Disable 1000Mbps Auto-Neg Always */
-#define GG82563_PMCR_REVERSE_AUTO_NEG_D0A           0x0040 /* 1=Enable D0a Reverse Auto-Negotiation */
-#define GG82563_PMCR_FORCE_POWER_STATE              0x0080 /* 1=Force Power State */
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_MASK    0x0300
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_DR      0x0000 /* 00=Dr */
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0U     0x0100 /* 01=D0u */
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0A     0x0200 /* 10=D0a */
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D3      0x0300 /* 11=D3 */
-
-/* In-Band Control Register (Page 194, Register 18) */
-#define GG82563_ICR_DIS_PADDING                     0x0010 /* Disable Padding Use */
-
-
 /* Bit definitions for valid PHY IDs. */
 /* I = Integrated
  * E = External
@@ -3154,8 +2869,6 @@ struct e1000_host_command_info {
 #define M88E1011_I_REV_4   0x04
 #define M88E1111_I_PHY_ID  0x01410CC0
 #define L1LXT971A_PHY_ID   0x001378E0
-#define GG82563_E_PHY_ID   0x01410CA0
-
 
 /* Bits...
  * 15-5: page
@@ -3166,41 +2879,41 @@ struct e1000_host_command_info {
         (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
 
 #define IGP3_PHY_PORT_CTRL           \
-        PHY_REG(769, 17) /* Port General Configuration */
+        PHY_REG(769, 17)	/* Port General Configuration */
 #define IGP3_PHY_RATE_ADAPT_CTRL \
-        PHY_REG(769, 25) /* Rate Adapter Control Register */
+        PHY_REG(769, 25)	/* Rate Adapter Control Register */
 
 #define IGP3_KMRN_FIFO_CTRL_STATS \
-        PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+        PHY_REG(770, 16)	/* KMRN FIFO's control/status register */
 #define IGP3_KMRN_POWER_MNG_CTRL \
-        PHY_REG(770, 17) /* KMRN Power Management Control Register */
+        PHY_REG(770, 17)	/* KMRN Power Management Control Register */
 #define IGP3_KMRN_INBAND_CTRL \
-        PHY_REG(770, 18) /* KMRN Inband Control Register */
+        PHY_REG(770, 18)	/* KMRN Inband Control Register */
 #define IGP3_KMRN_DIAG \
-        PHY_REG(770, 19) /* KMRN Diagnostic register */
-#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+        PHY_REG(770, 19)	/* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002	/* RX PCS is not synced */
 #define IGP3_KMRN_ACK_TIMEOUT \
-        PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+        PHY_REG(770, 20)	/* KMRN Acknowledge Timeouts register */
 
 #define IGP3_VR_CTRL \
-        PHY_REG(776, 18) /* Voltage regulator control register */
-#define IGP3_VR_CTRL_MODE_SHUT       0x0200 /* Enter powerdown, shutdown VRs */
-#define IGP3_VR_CTRL_MODE_MASK       0x0300 /* Shutdown VR Mask */
+        PHY_REG(776, 18)	/* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT       0x0200	/* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK       0x0300	/* Shutdown VR Mask */
 
 #define IGP3_CAPABILITY \
-        PHY_REG(776, 19) /* IGP3 Capability Register */
+        PHY_REG(776, 19)	/* IGP3 Capability Register */
 
 /* Capabilities for SKU Control  */
-#define IGP3_CAP_INITIATE_TEAM       0x0001 /* Able to initiate a team */
-#define IGP3_CAP_WFM                 0x0002 /* Support WoL and PXE */
-#define IGP3_CAP_ASF                 0x0004 /* Support ASF */
-#define IGP3_CAP_LPLU                0x0008 /* Support Low Power Link Up */
-#define IGP3_CAP_DC_AUTO_SPEED       0x0010 /* Support AC/DC Auto Link Speed */
-#define IGP3_CAP_SPD                 0x0020 /* Support Smart Power Down */
-#define IGP3_CAP_MULT_QUEUE          0x0040 /* Support 2 tx & 2 rx queues */
-#define IGP3_CAP_RSS                 0x0080 /* Support RSS */
-#define IGP3_CAP_8021PQ              0x0100 /* Support 802.1Q & 802.1p */
-#define IGP3_CAP_AMT_CB              0x0200 /* Support active manageability and circuit breaker */
+#define IGP3_CAP_INITIATE_TEAM       0x0001	/* Able to initiate a team */
+#define IGP3_CAP_WFM                 0x0002	/* Support WoL and PXE */
+#define IGP3_CAP_ASF                 0x0004	/* Support ASF */
+#define IGP3_CAP_LPLU                0x0008	/* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED       0x0010	/* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD                 0x0020	/* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE          0x0040	/* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS                 0x0080	/* Support RSS */
+#define IGP3_CAP_8021PQ              0x0100	/* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB              0x0200	/* Support active manageability and circuit breaker */
 
 #define IGP3_PPC_JORDAN_EN           0x0001
 #define IGP3_PPC_JORDAN_GIGA_SPEED   0x0002
@@ -3210,69 +2923,69 @@ struct e1000_host_command_info {
 #define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA        0x0020
 #define IGP3_KMRN_PMC_K0S_MODE1_EN_100         0x0040
 
-#define IGP3E1000_PHY_MISC_CTRL                0x1B   /* Misc. Ctrl register */
-#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET        0x1000 /* Duplex Manual Set */
+#define IGP3E1000_PHY_MISC_CTRL                0x1B	/* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET        0x1000	/* Duplex Manual Set */
 
 #define IGP3_KMRN_EXT_CTRL  PHY_REG(770, 18)
 #define IGP3_KMRN_EC_DIS_INBAND    0x0080
 
 #define IGP03E1000_E_PHY_ID  0x02A80390
-#define IFE_E_PHY_ID         0x02A80330 /* 10/100 PHY */
+#define IFE_E_PHY_ID         0x02A80330	/* 10/100 PHY */
 #define IFE_PLUS_E_PHY_ID    0x02A80320
 #define IFE_C_E_PHY_ID       0x02A80310
 
-#define IFE_PHY_EXTENDED_STATUS_CONTROL   0x10  /* 100BaseTx Extended Status, Control and Address */
-#define IFE_PHY_SPECIAL_CONTROL           0x11  /* 100BaseTx PHY special control register */
-#define IFE_PHY_RCV_FALSE_CARRIER         0x13  /* 100BaseTx Receive False Carrier Counter */
-#define IFE_PHY_RCV_DISCONNECT            0x14  /* 100BaseTx Receive Disconnet Counter */
-#define IFE_PHY_RCV_ERROT_FRAME           0x15  /* 100BaseTx Receive Error Frame Counter */
-#define IFE_PHY_RCV_SYMBOL_ERR            0x16  /* Receive Symbol Error Counter */
-#define IFE_PHY_PREM_EOF_ERR              0x17  /* 100BaseTx Receive Premature End Of Frame Error Counter */
-#define IFE_PHY_RCV_EOF_ERR               0x18  /* 10BaseT Receive End Of Frame Error Counter */
-#define IFE_PHY_TX_JABBER_DETECT          0x19  /* 10BaseT Transmit Jabber Detect Counter */
-#define IFE_PHY_EQUALIZER                 0x1A  /* PHY Equalizer Control and Status */
-#define IFE_PHY_SPECIAL_CONTROL_LED       0x1B  /* PHY special control and LED configuration */
-#define IFE_PHY_MDIX_CONTROL              0x1C  /* MDI/MDI-X Control register */
-#define IFE_PHY_HWI_CONTROL               0x1D  /* Hardware Integrity Control (HWI) */
-
-#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE  0x2000  /* Defaut 1 = Disable auto reduced power down */
-#define IFE_PESC_100BTX_POWER_DOWN           0x0400  /* Indicates the power state of 100BASE-TX */
-#define IFE_PESC_10BTX_POWER_DOWN            0x0200  /* Indicates the power state of 10BASE-T */
-#define IFE_PESC_POLARITY_REVERSED           0x0100  /* Indicates 10BASE-T polarity */
-#define IFE_PESC_PHY_ADDR_MASK               0x007C  /* Bit 6:2 for sampled PHY address */
-#define IFE_PESC_SPEED                       0x0002  /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
-#define IFE_PESC_DUPLEX                      0x0001  /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PHY_EXTENDED_STATUS_CONTROL   0x10	/* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL           0x11	/* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER         0x13	/* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT            0x14	/* 100BaseTx Receive Disconnect Counter */
+#define IFE_PHY_RCV_ERROT_FRAME           0x15	/* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR            0x16	/* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR              0x17	/* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR               0x18	/* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT          0x19	/* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER                 0x1A	/* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED       0x1B	/* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL              0x1C	/* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL               0x1D	/* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE  0x2000	/* Default 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN           0x0400	/* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN            0x0200	/* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED           0x0100	/* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK               0x007C	/* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED                       0x0002	/* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX                      0x0001	/* Auto-negotiation duplex result 1=Full, 0=Half */
 #define IFE_PESC_POLARITY_REVERSED_SHIFT     8
 
-#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN   0x0100  /* 1 = Dyanmic Power Down disabled */
-#define IFE_PSC_FORCE_POLARITY               0x0020  /* 1=Reversed Polarity, 0=Normal */
-#define IFE_PSC_AUTO_POLARITY_DISABLE        0x0010  /* 1=Auto Polarity Disabled, 0=Enabled */
-#define IFE_PSC_JABBER_FUNC_DISABLE          0x0001  /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN   0x0100	/* 1 = Dynamic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY               0x0020	/* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE        0x0010	/* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE          0x0001	/* 1=Jabber Disabled, 0=Normal Jabber Operation */
 #define IFE_PSC_FORCE_POLARITY_SHIFT         5
 #define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT  4
 
-#define IFE_PMC_AUTO_MDIX                    0x0080  /* 1=enable MDI/MDI-X feature, default 0=disabled */
-#define IFE_PMC_FORCE_MDIX                   0x0040  /* 1=force MDIX-X, 0=force MDI */
-#define IFE_PMC_MDIX_STATUS                  0x0020  /* 1=MDI-X, 0=MDI */
-#define IFE_PMC_AUTO_MDIX_COMPLETE           0x0010  /* Resolution algorithm is completed */
+#define IFE_PMC_AUTO_MDIX                    0x0080	/* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX                   0x0040	/* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS                  0x0020	/* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE           0x0010	/* Resolution algorithm is completed */
 #define IFE_PMC_MDIX_MODE_SHIFT              6
-#define IFE_PHC_MDIX_RESET_ALL_MASK          0x0000  /* Disable auto MDI-X */
-
-#define IFE_PHC_HWI_ENABLE                   0x8000  /* Enable the HWI feature */
-#define IFE_PHC_ABILITY_CHECK                0x4000  /* 1= Test Passed, 0=failed */
-#define IFE_PHC_TEST_EXEC                    0x2000  /* PHY launch test pulses on the wire */
-#define IFE_PHC_HIGHZ                        0x0200  /* 1 = Open Circuit */
-#define IFE_PHC_LOWZ                         0x0400  /* 1 = Short Circuit */
-#define IFE_PHC_LOW_HIGH_Z_MASK              0x0600  /* Mask for indication type of problem on the line */
-#define IFE_PHC_DISTANCE_MASK                0x01FF  /* Mask for distance to the cable problem, in 80cm granularity */
-#define IFE_PHC_RESET_ALL_MASK               0x0000  /* Disable HWI */
-#define IFE_PSCL_PROBE_MODE                  0x0020  /* LED Probe mode */
-#define IFE_PSCL_PROBE_LEDS_OFF              0x0006  /* Force LEDs 0 and 2 off */
-#define IFE_PSCL_PROBE_LEDS_ON               0x0007  /* Force LEDs 0 and 2 on */
-
-#define ICH_FLASH_COMMAND_TIMEOUT            5000    /* 5000 uSecs - adjusted */
-#define ICH_FLASH_ERASE_TIMEOUT              3000000 /* Up to 3 seconds - worst case */
-#define ICH_FLASH_CYCLE_REPEAT_COUNT         10      /* 10 cycles */
+#define IFE_PHC_MDIX_RESET_ALL_MASK          0x0000	/* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE                   0x8000	/* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK                0x4000	/* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC                    0x2000	/* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ                        0x0200	/* 1 = Open Circuit */
+#define IFE_PHC_LOWZ                         0x0400	/* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK              0x0600	/* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK                0x01FF	/* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK               0x0000	/* Disable HWI */
+#define IFE_PSCL_PROBE_MODE                  0x0020	/* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF              0x0006	/* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON               0x0007	/* Force LEDs 0 and 2 on */
+
+#define ICH_FLASH_COMMAND_TIMEOUT            5000	/* 5000 uSecs - adjusted */
+#define ICH_FLASH_ERASE_TIMEOUT              3000000	/* Up to 3 seconds - worst case */
+#define ICH_FLASH_CYCLE_REPEAT_COUNT         10	/* 10 cycles */
 #define ICH_FLASH_SEG_SIZE_256               256
 #define ICH_FLASH_SEG_SIZE_4K                4096
 #define ICH_FLASH_SEG_SIZE_64K               65536
@@ -3305,74 +3018,6 @@ struct e1000_host_command_info {
 #define ICH_GFPREG_BASE_MASK       0x1FFF
 #define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
 
-/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
-/* Offset 04h HSFSTS */
-union ich8_hws_flash_status {
-    struct ich8_hsfsts {
-#ifdef __BIG_ENDIAN
-        u16 reserved2      :6;
-        u16 fldesvalid     :1;
-        u16 flockdn        :1;
-        u16 flcdone        :1;
-        u16 flcerr         :1;
-        u16 dael           :1;
-        u16 berasesz       :2;
-        u16 flcinprog      :1;
-        u16 reserved1      :2;
-#else
-        u16 flcdone        :1;   /* bit 0 Flash Cycle Done */
-        u16 flcerr         :1;   /* bit 1 Flash Cycle Error */
-        u16 dael           :1;   /* bit 2 Direct Access error Log */
-        u16 berasesz       :2;   /* bit 4:3 Block/Sector Erase Size */
-        u16 flcinprog      :1;   /* bit 5 flash SPI cycle in Progress */
-        u16 reserved1      :2;   /* bit 13:6 Reserved */
-        u16 reserved2      :6;   /* bit 13:6 Reserved */
-        u16 fldesvalid     :1;   /* bit 14 Flash Descriptor Valid */
-        u16 flockdn        :1;   /* bit 15 Flash Configuration Lock-Down */
-#endif
-    } hsf_status;
-    u16 regval;
-};
-
-/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */
-/* Offset 06h FLCTL */
-union ich8_hws_flash_ctrl {
-    struct ich8_hsflctl {
-#ifdef __BIG_ENDIAN
-        u16 fldbcount      :2;
-        u16 flockdn        :6;
-        u16 flcgo          :1;
-        u16 flcycle        :2;
-        u16 reserved       :5;
-#else
-        u16 flcgo          :1;   /* 0 Flash Cycle Go */
-        u16 flcycle        :2;   /* 2:1 Flash Cycle */
-        u16 reserved       :5;   /* 7:3 Reserved  */
-        u16 fldbcount      :2;   /* 9:8 Flash Data Byte Count */
-        u16 flockdn        :6;   /* 15:10 Reserved */
-#endif
-    } hsf_ctrl;
-    u16 regval;
-};
-
-/* ICH8 Flash Region Access Permissions */
-union ich8_hws_flash_regacc {
-    struct ich8_flracc {
-#ifdef __BIG_ENDIAN
-        u32 gmwag          :8;
-        u32 gmrag          :8;
-        u32 grwa           :8;
-        u32 grra           :8;
-#else
-        u32 grra           :8;   /* 0:7 GbE region Read Access */
-        u32 grwa           :8;   /* 8:15 GbE region Write Access */
-        u32 gmrag          :8;   /* 23:16 GbE Master Read Access Grant  */
-        u32 gmwag          :8;   /* 31:24 GbE Master Write Access Grant */
-#endif
-    } hsf_flregacc;
-    u16 regval;
-};
-
 /* Miscellaneous PHY bit definitions. */
 #define PHY_PREAMBLE        0xFFFFFFFF
 #define PHY_SOF             0x01
@@ -3384,10 +3029,10 @@ union ich8_hws_flash_regacc {
 #define MII_CR_SPEED_100    0x2000
 #define MII_CR_SPEED_10     0x0000
 #define E1000_PHY_ADDRESS   0x01
-#define PHY_AUTO_NEG_TIME   45  /* 4.5 Seconds */
-#define PHY_FORCE_TIME      20  /* 2.0 Seconds */
+#define PHY_AUTO_NEG_TIME   45	/* 4.5 Seconds */
+#define PHY_FORCE_TIME      20	/* 2.0 Seconds */
 #define PHY_REVISION_MASK   0xFFFFFFF0
-#define DEVICE_SPEED_MASK   0x00000300  /* Device Ctrl Reg Speed Mask */
+#define DEVICE_SPEED_MASK   0x00000300	/* Device Ctrl Reg Speed Mask */
 #define REG4_SPEED_MASK     0x01E0
 #define REG9_SPEED_MASK     0x0300
 #define ADVERTISE_10_HALF   0x0001
@@ -3396,8 +3041,8 @@ union ich8_hws_flash_regacc {
 #define ADVERTISE_100_FULL  0x0008
 #define ADVERTISE_1000_HALF 0x0010
 #define ADVERTISE_1000_FULL 0x0020
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F  /* Everything but 1000-Half */
-#define AUTONEG_ADVERTISE_10_100_ALL    0x000F /* All 10/100 speeds*/
-#define AUTONEG_ADVERTISE_10_ALL        0x0003 /* 10Mbps Full & Half speeds*/
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F	/* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL    0x000F	/* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL        0x0003	/* 10Mbps Full & Half speeds */
 
 #endif /* _E1000_HW_H_ */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index c66dd4f9437c..bcd192ca47b0 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -31,7 +31,7 @@
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.21-k3-NAPI"
+#define DRV_VERSION "7.3.21-k5-NAPI"
 const char e1000_driver_version[] = DRV_VERSION;
 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -131,7 +131,6 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
 static int e1000_set_mac(struct net_device *netdev, void *p);
 static irqreturn_t e1000_intr(int irq, void *data);
-static irqreturn_t e1000_intr_msi(int irq, void *data);
 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 			       struct e1000_tx_ring *tx_ring);
 static int e1000_clean(struct napi_struct *napi, int budget);
@@ -258,25 +257,14 @@ module_exit(e1000_exit_module);
 
 static int e1000_request_irq(struct e1000_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	irq_handler_t handler = e1000_intr;
 	int irq_flags = IRQF_SHARED;
 	int err;
 
-	if (hw->mac_type >= e1000_82571) {
-		adapter->have_msi = !pci_enable_msi(adapter->pdev);
-		if (adapter->have_msi) {
-			handler = e1000_intr_msi;
-			irq_flags = 0;
-		}
-	}
-
 	err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
 	                  netdev);
 	if (err) {
-		if (adapter->have_msi)
-			pci_disable_msi(adapter->pdev);
 		DPRINTK(PROBE, ERR,
 		        "Unable to allocate interrupt Error: %d\n", err);
 	}
@@ -289,9 +277,6 @@ static void e1000_free_irq(struct e1000_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 
 	free_irq(adapter->pdev->irq, netdev);
-
-	if (adapter->have_msi)
-		pci_disable_msi(adapter->pdev);
 }
 
 /**
@@ -345,76 +330,6 @@ static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
 	}
 }
 
-/**
- * e1000_release_hw_control - release control of the h/w to f/w
- * @adapter: address of board private structure
- *
- * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that the
- * driver is no longer loaded. For AMT version (only with 82573) i
- * of the f/w this means that the network i/f is closed.
- *
- **/
-
-static void e1000_release_hw_control(struct e1000_adapter *adapter)
-{
-	u32 ctrl_ext;
-	u32 swsm;
-	struct e1000_hw *hw = &adapter->hw;
-
-	/* Let firmware taken over control of h/w */
-	switch (hw->mac_type) {
-	case e1000_82573:
-		swsm = er32(SWSM);
-		ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
-		break;
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_80003es2lan:
-	case e1000_ich8lan:
-		ctrl_ext = er32(CTRL_EXT);
-		ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
-		break;
-	default:
-		break;
-	}
-}
-
-/**
- * e1000_get_hw_control - get control of the h/w from f/w
- * @adapter: address of board private structure
- *
- * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that
- * the driver is loaded. For AMT version (only with 82573)
- * of the f/w this means that the network i/f is open.
- *
- **/
-
-static void e1000_get_hw_control(struct e1000_adapter *adapter)
-{
-	u32 ctrl_ext;
-	u32 swsm;
-	struct e1000_hw *hw = &adapter->hw;
-
-	/* Let firmware know the driver has taken over */
-	switch (hw->mac_type) {
-	case e1000_82573:
-		swsm = er32(SWSM);
-		ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
-		break;
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_80003es2lan:
-	case e1000_ich8lan:
-		ctrl_ext = er32(CTRL_EXT);
-		ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
-		break;
-	default:
-		break;
-	}
-}
-
 static void e1000_init_manageability(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
@@ -425,20 +340,6 @@ static void e1000_init_manageability(struct e1000_adapter *adapter)
 		/* disable hardware interception of ARP */
 		manc &= ~(E1000_MANC_ARP_EN);
 
-		/* enable receiving management packets to the host */
-		/* this will probably generate destination unreachable messages
-		 * from the host OS, but the packets will be handled on SMBUS */
-		if (hw->has_manc2h) {
-			u32 manc2h = er32(MANC2H);
-
-			manc |= E1000_MANC_EN_MNG2HOST;
-#define E1000_MNG2HOST_PORT_623 (1 << 5)
-#define E1000_MNG2HOST_PORT_664 (1 << 6)
-			manc2h |= E1000_MNG2HOST_PORT_623;
-			manc2h |= E1000_MNG2HOST_PORT_664;
-			ew32(MANC2H, manc2h);
-		}
-
 		ew32(MANC, manc);
 	}
 }
@@ -453,12 +354,6 @@ static void e1000_release_manageability(struct e1000_adapter *adapter)
 		/* re-enable hardware interception of ARP */
 		manc |= E1000_MANC_ARP_EN;
 
-		if (hw->has_manc2h)
-			manc &= ~E1000_MANC_EN_MNG2HOST;
-
-		/* don't explicitly have to mess with MANC2H since
-		 * MANC has an enable disable that gates MANC2H */
-
 		ew32(MANC, manc);
 	}
 }
@@ -563,15 +458,6 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
 			if (er32(MANC) & E1000_MANC_SMBUS_EN)
 				goto out;
 			break;
-		case e1000_82571:
-		case e1000_82572:
-		case e1000_82573:
-		case e1000_80003es2lan:
-		case e1000_ich8lan:
-			if (e1000_check_mng_mode(hw) ||
-			    e1000_check_phy_reset_block(hw))
-				goto out;
-			break;
 		default:
 			goto out;
 		}
@@ -599,8 +485,7 @@ void e1000_down(struct e1000_adapter *adapter)
 	ew32(RCTL, rctl & ~E1000_RCTL_EN);
 	/* flush and sleep below */
 
-	/* can be netif_tx_disable when NETIF_F_LLTX is removed */
-	netif_stop_queue(netdev);
+	netif_tx_disable(netdev);
 
 	/* disable transmits in the hardware */
 	tctl = er32(TCTL);
@@ -671,16 +556,6 @@ void e1000_reset(struct e1000_adapter *adapter)
 		legacy_pba_adjust = true;
 		pba = E1000_PBA_30K;
 		break;
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_80003es2lan:
-		pba = E1000_PBA_38K;
-		break;
-	case e1000_82573:
-		pba = E1000_PBA_20K;
-		break;
-	case e1000_ich8lan:
-		pba = E1000_PBA_8K;
 	case e1000_undefined:
 	case e1000_num_macs:
 		break;
@@ -744,16 +619,8 @@ void e1000_reset(struct e1000_adapter *adapter)
 
 			/* if short on rx space, rx wins and must trump tx
 			 * adjustment or use Early Receive if available */
-			if (pba < min_rx_space) {
-				switch (hw->mac_type) {
-				case e1000_82573:
-					/* ERT enabled in e1000_configure_rx */
-					break;
-				default:
-					pba = min_rx_space;
-					break;
-				}
-			}
+			if (pba < min_rx_space)
+				pba = min_rx_space;
 		}
 	}
 
@@ -789,7 +656,6 @@ void e1000_reset(struct e1000_adapter *adapter)
 
 	/* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
 	if (hw->mac_type >= e1000_82544 &&
-	    hw->mac_type <= e1000_82547_rev_2 &&
 	    hw->autoneg == 1 &&
 	    hw->autoneg_advertised == ADVERTISE_1000_FULL) {
 		u32 ctrl = er32(CTRL);
@@ -806,20 +672,6 @@ void e1000_reset(struct e1000_adapter *adapter)
 	e1000_reset_adaptive(hw);
 	e1000_phy_get_info(hw, &adapter->phy_info);
 
-	if (!adapter->smart_power_down &&
-	    (hw->mac_type == e1000_82571 ||
-	     hw->mac_type == e1000_82572)) {
-		u16 phy_data = 0;
-		/* speed up time to link by disabling smart power down, ignore
-		 * the return value of this function because there is nothing
-		 * different we would do if it failed */
-		e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-		                   &phy_data);
-		phy_data &= ~IGP02E1000_PM_SPD;
-		e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-		                    phy_data);
-	}
-
 	e1000_release_manageability(adapter);
 }
 
@@ -1046,17 +898,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		goto err_sw_init;
 
 	err = -EIO;
-	/* Flash BAR mapping must happen after e1000_sw_init
-	 * because it depends on mac_type */
-	if ((hw->mac_type == e1000_ich8lan) &&
-	   (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
-		hw->flash_address = pci_ioremap_bar(pdev, 1);
-		if (!hw->flash_address)
-			goto err_flashmap;
-	}
-
-	if (e1000_check_phy_reset_block(hw))
-		DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 
 	if (hw->mac_type >= e1000_82543) {
 		netdev->features = NETIF_F_SG |
@@ -1064,21 +905,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 				   NETIF_F_HW_VLAN_TX |
 				   NETIF_F_HW_VLAN_RX |
 				   NETIF_F_HW_VLAN_FILTER;
-		if (hw->mac_type == e1000_ich8lan)
-			netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
 	}
 
 	if ((hw->mac_type >= e1000_82544) &&
 	   (hw->mac_type != e1000_82547))
 		netdev->features |= NETIF_F_TSO;
 
-	if (hw->mac_type > e1000_82547_rev_2)
-		netdev->features |= NETIF_F_TSO6;
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
 	netdev->vlan_features |= NETIF_F_TSO;
-	netdev->vlan_features |= NETIF_F_TSO6;
 	netdev->vlan_features |= NETIF_F_HW_CSUM;
 	netdev->vlan_features |= NETIF_F_SG;
 
@@ -1153,15 +989,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 			EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
 		eeprom_apme_mask = E1000_EEPROM_82544_APM;
 		break;
-	case e1000_ich8lan:
-		e1000_read_eeprom(hw,
-			EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
-		eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
-		break;
 	case e1000_82546:
 	case e1000_82546_rev_3:
-	case e1000_82571:
-	case e1000_80003es2lan:
 		if (er32(STATUS) & E1000_STATUS_FUNC_1){
 			e1000_read_eeprom(hw,
 				EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
@@ -1185,17 +1014,12 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		break;
 	case E1000_DEV_ID_82546EB_FIBER:
 	case E1000_DEV_ID_82546GB_FIBER:
-	case E1000_DEV_ID_82571EB_FIBER:
 		/* Wake events only supported on port A for dual fiber
 		 * regardless of eeprom setting */
 		if (er32(STATUS) & E1000_STATUS_FUNC_1)
 			adapter->eeprom_wol = 0;
 		break;
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
-	case E1000_DEV_ID_82571EB_QUAD_COPPER:
-	case E1000_DEV_ID_82571EB_QUAD_FIBER:
-	case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
-	case E1000_DEV_ID_82571PT_QUAD_COPPER:
 		/* if quad port adapter, disable WoL on all but port A */
 		if (global_quad_port_a != 0)
 			adapter->eeprom_wol = 0;
@@ -1213,39 +1037,18 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	/* print bus type/speed/width info */
 	DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
-		((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
-		 (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
-		((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
-		 (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
+		((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
+		((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
 		 (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
 		 (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
 		 (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
-		((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
-		 (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
-		 (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
-		 "32-bit"));
+		((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
 
 	printk("%pM\n", netdev->dev_addr);
 
-	if (hw->bus_type == e1000_bus_type_pci_express) {
-		DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no "
-			"longer be supported by this driver in the future.\n",
-			pdev->vendor, pdev->device);
-		DPRINTK(PROBE, WARNING, "please use the \"e1000e\" "
-			"driver instead.\n");
-	}
-
 	/* reset the hardware with the new settings */
 	e1000_reset(adapter);
 
-	/* If the controller is 82573 and f/w is AMT, do not set
-	 * DRV_LOAD until the interface is up.  For all other cases,
-	 * let the f/w know that the h/w is now under the control
-	 * of the driver. */
-	if (hw->mac_type != e1000_82573 ||
-	    !e1000_check_mng_mode(hw))
-		e1000_get_hw_control(adapter);
-
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
 	if (err)
@@ -1260,14 +1063,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	return 0;
 
 err_register:
-	e1000_release_hw_control(adapter);
 err_eeprom:
-	if (!e1000_check_phy_reset_block(hw))
-		e1000_phy_hw_reset(hw);
+	e1000_phy_hw_reset(hw);
 
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
-err_flashmap:
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 err_sw_init:
@@ -1298,18 +1098,18 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
+	set_bit(__E1000_DOWN, &adapter->flags);
+	del_timer_sync(&adapter->tx_fifo_stall_timer);
+	del_timer_sync(&adapter->watchdog_timer);
+	del_timer_sync(&adapter->phy_info_timer);
+
 	cancel_work_sync(&adapter->reset_task);
 
 	e1000_release_manageability(adapter);
 
-	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
-	 * would have already happened in close and is redundant. */
-	e1000_release_hw_control(adapter);
-
 	unregister_netdev(netdev);
 
-	if (!e1000_check_phy_reset_block(hw))
-		e1000_phy_hw_reset(hw);
+	e1000_phy_hw_reset(hw);
 
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
@@ -1472,12 +1272,6 @@ static int e1000_open(struct net_device *netdev)
 		e1000_update_mng_vlan(adapter);
 	}
 
-	/* If AMT is enabled, let the firmware know that the network
-	 * interface is now open */
-	if (hw->mac_type == e1000_82573 &&
-	    e1000_check_mng_mode(hw))
-		e1000_get_hw_control(adapter);
-
 	/* before we allocate an interrupt, we must be ready to handle it.
 	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
 	 * as soon as we call pci_request_irq, so we have to setup our
@@ -1503,7 +1297,6 @@ static int e1000_open(struct net_device *netdev)
 	return E1000_SUCCESS;
 
 err_req_irq:
-	e1000_release_hw_control(adapter);
 	e1000_power_down_phy(adapter);
 	e1000_free_all_rx_resources(adapter);
 err_setup_rx:
@@ -1548,12 +1341,6 @@ static int e1000_close(struct net_device *netdev)
 		e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
 	}
 
-	/* If AMT is enabled, let the firmware know that the network
-	 * interface is now closed */
-	if (hw->mac_type == e1000_82573 &&
-	    e1000_check_mng_mode(hw))
-		e1000_release_hw_control(adapter);
-
 	return 0;
 }
 
@@ -1692,7 +1479,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 {
 	u64 tdba;
 	struct e1000_hw *hw = &adapter->hw;
-	u32 tdlen, tctl, tipg, tarc;
+	u32 tdlen, tctl, tipg;
 	u32 ipgr1, ipgr2;
 
 	/* Setup the HW Tx Head and Tail descriptor pointers */
@@ -1714,8 +1501,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 	}
 
 	/* Set the default values for the Tx Inter Packet Gap timer */
-	if (hw->mac_type <= e1000_82547_rev_2 &&
-	    (hw->media_type == e1000_media_type_fiber ||
+	if ((hw->media_type == e1000_media_type_fiber ||
 	     hw->media_type == e1000_media_type_internal_serdes))
 		tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
 	else
@@ -1728,10 +1514,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 		ipgr1 = DEFAULT_82542_TIPG_IPGR1;
 		ipgr2 = DEFAULT_82542_TIPG_IPGR2;
 		break;
-	case e1000_80003es2lan:
-		ipgr1 = DEFAULT_82543_TIPG_IPGR1;
-		ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
-		break;
 	default:
 		ipgr1 = DEFAULT_82543_TIPG_IPGR1;
 		ipgr2 = DEFAULT_82543_TIPG_IPGR2;
@@ -1754,21 +1536,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
 		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
 
-	if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
-		tarc = er32(TARC0);
-		/* set the speed mode bit, we'll clear it if we're not at
-		 * gigabit link later */
-		tarc |= (1 << 21);
-		ew32(TARC0, tarc);
-	} else if (hw->mac_type == e1000_80003es2lan) {
-		tarc = er32(TARC0);
-		tarc |= 1;
-		ew32(TARC0, tarc);
-		tarc = er32(TARC1);
-		tarc |= 1;
-		ew32(TARC1, tarc);
-	}
-
 	e1000_config_collision_dist(hw);
 
 	/* Setup Transmit Descriptor Settings for eop descriptor */
@@ -1804,7 +1571,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 				    struct e1000_rx_ring *rxdr)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
 	int size, desc_len;
 
@@ -1817,10 +1583,7 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 	}
 	memset(rxdr->buffer_info, 0, size);
 
-	if (hw->mac_type <= e1000_82547_rev_2)
-		desc_len = sizeof(struct e1000_rx_desc);
-	else
-		desc_len = sizeof(union e1000_rx_desc_packet_split);
+	desc_len = sizeof(struct e1000_rx_desc);
 
 	/* Round up to nearest 4K */
 
@@ -1977,7 +1740,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 {
 	u64 rdba;
 	struct e1000_hw *hw = &adapter->hw;
-	u32 rdlen, rctl, rxcsum, ctrl_ext;
+	u32 rdlen, rctl, rxcsum;
 
 	if (adapter->netdev->mtu > ETH_DATA_LEN) {
 		rdlen = adapter->rx_ring[0].count *
@@ -2004,17 +1767,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 			ew32(ITR, 1000000000 / (adapter->itr * 256));
 	}
 
-	if (hw->mac_type >= e1000_82571) {
-		ctrl_ext = er32(CTRL_EXT);
-		/* Reset delay timers after every interrupt */
-		ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
-		/* Auto-Mask interrupts upon ICR access */
-		ctrl_ext |= E1000_CTRL_EXT_IAME;
-		ew32(IAM, 0xffffffff);
-		ew32(CTRL_EXT, ctrl_ext);
-		E1000_WRITE_FLUSH();
-	}
-
 	/* Setup the HW Rx Head and Tail Descriptor Pointers and
 	 * the Base and Length of the Rx Descriptor Ring */
 	switch (adapter->num_rx_queues) {
@@ -2329,22 +2081,6 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
 
 	e1000_rar_set(hw, hw->mac_addr, 0);
 
-	/* With 82571 controllers, LAA may be overwritten (with the default)
-	 * due to controller reset from the other port. */
-	if (hw->mac_type == e1000_82571) {
-		/* activate the work around */
-		hw->laa_is_present = 1;
-
-		/* Hold a copy of the LAA in RAR[14] This is done so that
-		 * between the time RAR[0] gets clobbered  and the time it
-		 * gets fixed (in e1000_watchdog), the actual LAA is in one
-		 * of the RARs and no incoming packets directed to this port
-		 * are dropped. Eventaully the LAA will be in RAR[0] and
-		 * RAR[14] */
-		e1000_rar_set(hw, hw->mac_addr,
-					E1000_RAR_ENTRIES - 1);
-	}
-
 	if (hw->mac_type == e1000_82542_rev2_0)
 		e1000_leave_82542_rst(adapter);
 
@@ -2371,9 +2107,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 	u32 rctl;
 	u32 hash_value;
 	int i, rar_entries = E1000_RAR_ENTRIES;
-	int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
-				E1000_NUM_MTA_REGISTERS_ICH8LAN :
-				E1000_NUM_MTA_REGISTERS;
+	int mta_reg_count = E1000_NUM_MTA_REGISTERS;
 	u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
 
 	if (!mcarray) {
@@ -2381,13 +2115,6 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 		return;
 	}
 
-	if (hw->mac_type == e1000_ich8lan)
-		rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
-
-	/* reserve RAR[14] for LAA over-write work-around */
-	if (hw->mac_type == e1000_82571)
-		rar_entries--;
-
 	/* Check for Promiscuous and All Multicast modes */
 
 	rctl = er32(RCTL);
@@ -2396,15 +2123,13 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
 		rctl &= ~E1000_RCTL_VFE;
 	} else {
-		if (netdev->flags & IFF_ALLMULTI) {
+		if (netdev->flags & IFF_ALLMULTI)
 			rctl |= E1000_RCTL_MPE;
-		} else {
+		else
 			rctl &= ~E1000_RCTL_MPE;
-		}
-		if (adapter->hw.mac_type != e1000_ich8lan)
-			/* Enable VLAN filter if there is a VLAN */
-			if (adapter->vlgrp)
-				rctl |= E1000_RCTL_VFE;
+		/* Enable VLAN filter if there is a VLAN */
+		if (adapter->vlgrp)
+			rctl |= E1000_RCTL_VFE;
 	}
 
 	if (netdev->uc.count > rar_entries - 1) {
@@ -2427,7 +2152,6 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 	 *
 	 * RAR 0 is used for the station MAC adddress
 	 * if there are not 14 addresses, go ahead and clear the filters
-	 * -- with 82571 controllers only 0-13 entries are filled here
 	 */
 	i = 1;
 	if (use_uc)
@@ -2521,12 +2245,46 @@ static void e1000_82547_tx_fifo_stall(unsigned long data)
 			adapter->tx_fifo_head = 0;
 			atomic_set(&adapter->tx_fifo_stall, 0);
 			netif_wake_queue(netdev);
-		} else {
+		} else if (!test_bit(__E1000_DOWN, &adapter->flags)) {
 			mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
 		}
 	}
 }
 
+static bool e1000_has_link(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	bool link_active = false;
+
+	/* get_link_status is set on LSC (link status) interrupt or
+	 * rx sequence error interrupt.  get_link_status will stay
+	 * false until the e1000_check_for_link establishes link
+	 * for copper adapters ONLY
+	 */
+	switch (hw->media_type) {
+	case e1000_media_type_copper:
+		if (hw->get_link_status) {
+			e1000_check_for_link(hw);
+			link_active = !hw->get_link_status;
+		} else {
+			link_active = true;
+		}
+		break;
+	case e1000_media_type_fiber:
+		e1000_check_for_link(hw);
+		link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+		break;
+	case e1000_media_type_internal_serdes:
+		e1000_check_for_link(hw);
+		link_active = hw->serdes_has_link;
+		break;
+	default:
+		break;
+	}
+
+	return link_active;
+}
+
 /**
  * e1000_watchdog - Timer Call-back
  * @data: pointer to adapter cast into an unsigned long
@@ -2538,33 +2296,16 @@ static void e1000_watchdog(unsigned long data)
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_tx_ring *txdr = adapter->tx_ring;
 	u32 link, tctl;
-	s32 ret_val;
-
-	ret_val = e1000_check_for_link(hw);
-	if ((ret_val == E1000_ERR_PHY) &&
-	    (hw->phy_type == e1000_phy_igp_3) &&
-	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
-		/* See e1000_kumeran_lock_loss_workaround() */
-		DPRINTK(LINK, INFO,
-			"Gigabit has been disabled, downgrading speed\n");
-	}
 
-	if (hw->mac_type == e1000_82573) {
-		e1000_enable_tx_pkt_filtering(hw);
-		if (adapter->mng_vlan_id != hw->mng_cookie.vlan_id)
-			e1000_update_mng_vlan(adapter);
-	}
-
-	if ((hw->media_type == e1000_media_type_internal_serdes) &&
-	   !(er32(TXCW) & E1000_TXCW_ANE))
-		link = !hw->serdes_link_down;
-	else
-		link = er32(STATUS) & E1000_STATUS_LU;
+	link = e1000_has_link(adapter);
+	if ((netif_carrier_ok(netdev)) && link)
+		goto link_up;
 
 	if (link) {
 		if (!netif_carrier_ok(netdev)) {
 			u32 ctrl;
 			bool txb2b = true;
+			/* update snapshot of PHY registers on LSC */
 			e1000_get_speed_and_duplex(hw,
 			                           &adapter->link_speed,
 			                           &adapter->link_duplex);
@@ -2589,7 +2330,7 @@ static void e1000_watchdog(unsigned long data)
 			case SPEED_10:
 				txb2b = false;
 				netdev->tx_queue_len = 10;
-				adapter->tx_timeout_factor = 8;
+				adapter->tx_timeout_factor = 16;
 				break;
 			case SPEED_100:
 				txb2b = false;
@@ -2598,52 +2339,16 @@ static void e1000_watchdog(unsigned long data)
 				break;
 			}
 
-			if ((hw->mac_type == e1000_82571 ||
-			     hw->mac_type == e1000_82572) &&
-			    !txb2b) {
-				u32 tarc0;
-				tarc0 = er32(TARC0);
-				tarc0 &= ~(1 << 21);
-				ew32(TARC0, tarc0);
-			}
-
-			/* disable TSO for pcie and 10/100 speeds, to avoid
-			 * some hardware issues */
-			if (!adapter->tso_force &&
-			    hw->bus_type == e1000_bus_type_pci_express){
-				switch (adapter->link_speed) {
-				case SPEED_10:
-				case SPEED_100:
-					DPRINTK(PROBE,INFO,
-				        "10/100 speed: disabling TSO\n");
-					netdev->features &= ~NETIF_F_TSO;
-					netdev->features &= ~NETIF_F_TSO6;
-					break;
-				case SPEED_1000:
-					netdev->features |= NETIF_F_TSO;
-					netdev->features |= NETIF_F_TSO6;
-					break;
-				default:
-					/* oops */
-					break;
-				}
-			}
-
-			/* enable transmits in the hardware, need to do this
-			 * after setting TARC0 */
+			/* enable transmits in the hardware */
 			tctl = er32(TCTL);
 			tctl |= E1000_TCTL_EN;
 			ew32(TCTL, tctl);
 
 			netif_carrier_on(netdev);
-			mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
+			if (!test_bit(__E1000_DOWN, &adapter->flags))
+				mod_timer(&adapter->phy_info_timer,
+				          round_jiffies(jiffies + 2 * HZ));
 			adapter->smartspeed = 0;
-		} else {
-			/* make sure the receive unit is started */
-			if (hw->rx_needs_kicking) {
-				u32 rctl = er32(RCTL);
-				ew32(RCTL, rctl | E1000_RCTL_EN);
-			}
 		}
 	} else {
 		if (netif_carrier_ok(netdev)) {
@@ -2652,21 +2357,16 @@ static void e1000_watchdog(unsigned long data)
 			printk(KERN_INFO "e1000: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
-
-			/* 80003ES2LAN workaround--
-			 * For packet buffer work-around on link down event;
-			 * disable receives in the ISR and
-			 * reset device here in the watchdog
-			 */
-			if (hw->mac_type == e1000_80003es2lan)
-				/* reset device */
-				schedule_work(&adapter->reset_task);
+
+			if (!test_bit(__E1000_DOWN, &adapter->flags))
+				mod_timer(&adapter->phy_info_timer,
+				          round_jiffies(jiffies + 2 * HZ));
 		}
 
 		e1000_smartspeed(adapter);
 	}
 
+link_up:
 	e1000_update_stats(adapter);
 
 	hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
@@ -2700,13 +2400,10 @@ static void e1000_watchdog(unsigned long data)
 	/* Force detection of hung controller every watchdog period */
 	adapter->detect_tx_hung = true;
 
-	/* With 82571 controllers, LAA may be overwritten due to controller
-	 * reset from the other port. Set the appropriate LAA in RAR[0] */
-	if (hw->mac_type == e1000_82571 && hw->laa_is_present)
-		e1000_rar_set(hw, hw->mac_addr, 0);
-
 	/* Reset the timer */
-	mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
+	if (!test_bit(__E1000_DOWN, &adapter->flags))
+		mod_timer(&adapter->watchdog_timer,
+		          round_jiffies(jiffies + 2 * HZ));
 }
 
 enum latency_range {
@@ -2718,6 +2415,11 @@ enum latency_range {
 
 /**
  * e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
  *      Stores a new ITR value based on packets and byte
  *      counts during the last interrupt.  The advantage of per interrupt
  *      computation is faster updates and more accurate ITR for the current
@@ -2727,10 +2429,6 @@ enum latency_range {
  *      while increasing bulk throughput.
  *      this functionality is controlled by the InterruptThrottleRate module
  *      parameter (see e1000_param.c)
- * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
  **/
 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
 				     u16 itr_setting, int packets, int bytes)
@@ -3035,8 +2733,9 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			size -= 4;
 
 		buffer_info->length = size;
-		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
+		/* set time_stamp *before* dma to help avoid a possible race */
 		buffer_info->time_stamp = jiffies;
+		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
 		buffer_info->next_to_watch = i;
 
 		len -= size;
@@ -3071,13 +2770,14 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			 * Avoid terminating buffers within evenly-aligned
 			 * dwords. */
 			if (unlikely(adapter->pcix_82544 &&
-			   !((unsigned long)(frag->page+offset+size-1) & 4) &&
-			   size > 4))
+			    !((unsigned long)(page_to_phys(frag->page) + offset
+			                      + size - 1) & 4) &&
+			    size > 4))
 				size -= 4;
 
 			buffer_info->length = size;
-			buffer_info->dma = map[f] + offset;
 			buffer_info->time_stamp = jiffies;
+			buffer_info->dma = map[f] + offset;
 			buffer_info->next_to_watch = i;
 
 			len -= size;
@@ -3186,41 +2886,6 @@ no_fifo_stall_required:
 	return 0;
 }
 
-#define MINIMUM_DHCP_PACKET_SIZE 282
-static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
-				    struct sk_buff *skb)
-{
-	struct e1000_hw *hw =  &adapter->hw;
-	u16 length, offset;
-	if (vlan_tx_tag_present(skb)) {
-		if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) &&
-			( hw->mng_cookie.status &
-			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
-			return 0;
-	}
-	if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
-		struct ethhdr *eth = (struct ethhdr *)skb->data;
-		if ((htons(ETH_P_IP) == eth->h_proto)) {
-			const struct iphdr *ip =
-				(struct iphdr *)((u8 *)skb->data+14);
-			if (IPPROTO_UDP == ip->protocol) {
-				struct udphdr *udp =
-					(struct udphdr *)((u8 *)ip +
-						(ip->ihl << 2));
-				if (ntohs(udp->dest) == 67) {
-					offset = (u8 *)udp + 8 - skb->data;
-					length = skb->len - offset;
-
-					return e1000_mng_write_dhcp_info(hw,
-							(u8 *)udp + 8,
-							length);
-				}
-			}
-		}
-	}
-	return 0;
-}
-
 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -3279,11 +2944,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		return NETDEV_TX_OK;
 	}
 
-	/* 82571 and newer doesn't need the workaround that limited descriptor
-	 * length to 4kB */
-	if (hw->mac_type >= e1000_82571)
-		max_per_txd = 8192;
-
 	mss = skb_shinfo(skb)->gso_size;
 	/* The controller does a simple calculation to
 	 * make sure there is enough room in the FIFO before
@@ -3296,9 +2956,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		max_per_txd = min(mss << 2, max_per_txd);
 		max_txd_pwr = fls(max_per_txd) - 1;
 
-		/* TSO Workaround for 82571/2/3 Controllers -- if skb->data
-		* points to just header, pull a few bytes of payload from
-		* frags into skb->data */
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (skb->data_len && hdr_len == len) {
 			switch (hw->mac_type) {
@@ -3313,10 +2970,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
 					break;
 				/* fall through */
-			case e1000_82571:
-			case e1000_82572:
-			case e1000_82573:
-			case e1000_ich8lan:
 				pull_size = min((unsigned int)4, skb->data_len);
 				if (!__pskb_pull_tail(skb, pull_size)) {
 					DPRINTK(DRV, ERR,
@@ -3361,11 +3014,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 	if (adapter->pcix_82544)
 		count += nr_frags;
 
-
-	if (hw->tx_pkt_filtering &&
-	    (hw->mac_type == e1000_82573))
-		e1000_transfer_dhcp_info(adapter, skb);
-
 	/* need: count + 2 desc gap to keep tail from touching
 	 * head, otherwise try next time */
 	if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
@@ -3374,7 +3022,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 	if (unlikely(hw->mac_type == e1000_82547)) {
 		if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
 			netif_stop_queue(netdev);
-			mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+			if (!test_bit(__E1000_DOWN, &adapter->flags))
+				mod_timer(&adapter->tx_fifo_stall_timer,
+				          jiffies + 1);
 			return NETDEV_TX_BUSY;
 		}
 	}
@@ -3393,14 +3043,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 	}
 
 	if (likely(tso)) {
-		tx_ring->last_tx_tso = 1;
+		if (likely(hw->mac_type != e1000_82544))
+			tx_ring->last_tx_tso = 1;
 		tx_flags |= E1000_TX_FLAGS_TSO;
 	} else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
 		tx_flags |= E1000_TX_FLAGS_CSUM;
 
-	/* Old method was to assume IPv4 packet by default if TSO was enabled.
-	 * 82571 hardware supports TSO capabilities for IPv6 as well...
-	 * no longer assume, we must. */
 	if (likely(skb->protocol == htons(ETH_P_IP)))
 		tx_flags |= E1000_TX_FLAGS_IPV4;
 
@@ -3472,7 +3120,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
-	u16 eeprom_data = 0;
 
 	if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
 	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
@@ -3483,44 +3130,23 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	/* Adapter-specific max frame size limits. */
 	switch (hw->mac_type) {
 	case e1000_undefined ... e1000_82542_rev2_1:
-	case e1000_ich8lan:
 		if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
 			DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
 			return -EINVAL;
 		}
 		break;
-	case e1000_82573:
-		/* Jumbo Frames not supported if:
-		 * - this is not an 82573L device
-		 * - ASPM is enabled in any way (0x1A bits 3:2) */
-		e1000_read_eeprom(hw, EEPROM_INIT_3GIO_3, 1,
-		                  &eeprom_data);
-		if ((hw->device_id != E1000_DEV_ID_82573L) ||
-		    (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
-			if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
-				DPRINTK(PROBE, ERR,
-			            	"Jumbo Frames not supported.\n");
-				return -EINVAL;
-			}
-			break;
-		}
-		/* ERT will be enabled later to enable wire speed receives */
-
-		/* fall through to get support */
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_80003es2lan:
-#define MAX_STD_JUMBO_FRAME_SIZE 9234
-		if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-			DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
-			return -EINVAL;
-		}
-		break;
 	default:
 		/* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
 		break;
 	}
 
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+		msleep(1);
+	/* e1000_down has a dependency on max_frame_size */
+	hw->max_frame_size = max_frame;
+	if (netif_running(netdev))
+		e1000_down(adapter);
+
 	/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
 	 * means we reserve 2 more, this pushes us to allocate from the next
 	 * larger slab size.
@@ -3549,11 +3175,16 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	     (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
 		adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
 
+	printk(KERN_INFO "e1000: %s changing MTU from %d to %d\n",
+	       netdev->name, netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
-	hw->max_frame_size = max_frame;
 
 	if (netif_running(netdev))
-		e1000_reinit_locked(adapter);
+		e1000_up(adapter);
+	else
+		e1000_reset(adapter);
+
+	clear_bit(__E1000_RESETTING, &adapter->flags);
 
 	return 0;
 }
@@ -3596,14 +3227,12 @@ void e1000_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.mprc += er32(MPRC);
 	adapter->stats.roc += er32(ROC);
 
-	if (hw->mac_type != e1000_ich8lan) {
-		adapter->stats.prc64 += er32(PRC64);
-		adapter->stats.prc127 += er32(PRC127);
-		adapter->stats.prc255 += er32(PRC255);
-		adapter->stats.prc511 += er32(PRC511);
-		adapter->stats.prc1023 += er32(PRC1023);
-		adapter->stats.prc1522 += er32(PRC1522);
-	}
+	adapter->stats.prc64 += er32(PRC64);
+	adapter->stats.prc127 += er32(PRC127);
+	adapter->stats.prc255 += er32(PRC255);
+	adapter->stats.prc511 += er32(PRC511);
+	adapter->stats.prc1023 += er32(PRC1023);
+	adapter->stats.prc1522 += er32(PRC1522);
 
 	adapter->stats.symerrs += er32(SYMERRS);
 	adapter->stats.mpc += er32(MPC);
@@ -3632,14 +3261,12 @@ void e1000_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.toth += er32(TOTH);
 	adapter->stats.tpr += er32(TPR);
 
-	if (hw->mac_type != e1000_ich8lan) {
-		adapter->stats.ptc64 += er32(PTC64);
-		adapter->stats.ptc127 += er32(PTC127);
-		adapter->stats.ptc255 += er32(PTC255);
-		adapter->stats.ptc511 += er32(PTC511);
-		adapter->stats.ptc1023 += er32(PTC1023);
-		adapter->stats.ptc1522 += er32(PTC1522);
-	}
+	adapter->stats.ptc64 += er32(PTC64);
+	adapter->stats.ptc127 += er32(PTC127);
+	adapter->stats.ptc255 += er32(PTC255);
+	adapter->stats.ptc511 += er32(PTC511);
+	adapter->stats.ptc1023 += er32(PTC1023);
+	adapter->stats.ptc1522 += er32(PTC1522);
 
 	adapter->stats.mptc += er32(MPTC);
 	adapter->stats.bptc += er32(BPTC);
@@ -3659,20 +3286,6 @@ void e1000_update_stats(struct e1000_adapter *adapter)
 		adapter->stats.tsctc += er32(TSCTC);
 		adapter->stats.tsctfc += er32(TSCTFC);
 	}
-	if (hw->mac_type > e1000_82547_rev_2) {
-		adapter->stats.iac += er32(IAC);
-		adapter->stats.icrxoc += er32(ICRXOC);
-
-		if (hw->mac_type != e1000_ich8lan) {
-			adapter->stats.icrxptc += er32(ICRXPTC);
-			adapter->stats.icrxatc += er32(ICRXATC);
-			adapter->stats.ictxptc += er32(ICTXPTC);
-			adapter->stats.ictxatc += er32(ICTXATC);
-			adapter->stats.ictxqec += er32(ICTXQEC);
-			adapter->stats.ictxqmtc += er32(ICTXQMTC);
-			adapter->stats.icrxdmtc += er32(ICRXDMTC);
-		}
-	}
 
 	/* Fill out the OS statistics structure */
 	adapter->net_stats.multicast = adapter->stats.mprc;
@@ -3731,49 +3344,6 @@ void e1000_update_stats(struct e1000_adapter *adapter)
 }
 
 /**
- * e1000_intr_msi - Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-
-static irqreturn_t e1000_intr_msi(int irq, void *data)
-{
-	struct net_device *netdev = data;
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
-	u32 icr = er32(ICR);
-
-	/* in NAPI mode read ICR disables interrupts using IAM */
-
-	if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
-		hw->get_link_status = 1;
-		/* 80003ES2LAN workaround-- For packet buffer work-around on
-		 * link down event; disable receives here in the ISR and reset
-		 * adapter in watchdog */
-		if (netif_carrier_ok(netdev) &&
-		    (hw->mac_type == e1000_80003es2lan)) {
-			/* disable receives */
-			u32 rctl = er32(RCTL);
-			ew32(RCTL, rctl & ~E1000_RCTL_EN);
-		}
-		/* guard against interrupt when we're going down */
-		if (!test_bit(__E1000_DOWN, &adapter->flags))
-			mod_timer(&adapter->watchdog_timer, jiffies + 1);
-	}
-
-	if (likely(napi_schedule_prep(&adapter->napi))) {
-		adapter->total_tx_bytes = 0;
-		adapter->total_tx_packets = 0;
-		adapter->total_rx_bytes = 0;
-		adapter->total_rx_packets = 0;
-		__napi_schedule(&adapter->napi);
-	} else
-		e1000_irq_enable(adapter);
-
-	return IRQ_HANDLED;
-}
-
-/**
  * e1000_intr - Interrupt Handler
  * @irq: interrupt number
  * @data: pointer to a network interface device structure
@@ -3784,43 +3354,22 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	u32 rctl, icr = er32(ICR);
+	u32 icr = er32(ICR);
 
 	if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
 		return IRQ_NONE;  /* Not our interrupt */
 
-	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
-	 * not set, then the adapter didn't send an interrupt */
-	if (unlikely(hw->mac_type >= e1000_82571 &&
-	             !(icr & E1000_ICR_INT_ASSERTED)))
-		return IRQ_NONE;
-
-	/* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
-	 * need for the IMC write */
-
 	if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
 		hw->get_link_status = 1;
-		/* 80003ES2LAN workaround--
-		 * For packet buffer work-around on link down event;
-		 * disable receives here in the ISR and
-		 * reset adapter in watchdog
-		 */
-		if (netif_carrier_ok(netdev) &&
-		    (hw->mac_type == e1000_80003es2lan)) {
-			/* disable receives */
-			rctl = er32(RCTL);
-			ew32(RCTL, rctl & ~E1000_RCTL_EN);
-		}
 		/* guard against interrupt when we're going down */
 		if (!test_bit(__E1000_DOWN, &adapter->flags))
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	if (unlikely(hw->mac_type < e1000_82571)) {
-		/* disable interrupts, without the synchronize_irq bit */
-		ew32(IMC, ~0);
-		E1000_WRITE_FLUSH();
-	}
+	/* disable interrupts, without the synchronize_irq bit */
+	ew32(IMC, ~0);
+	E1000_WRITE_FLUSH();
+
 	if (likely(napi_schedule_prep(&adapter->napi))) {
 		adapter->total_tx_bytes = 0;
 		adapter->total_tx_packets = 0;
@@ -3844,17 +3393,13 @@ static irqreturn_t e1000_intr(int irq, void *data)
 static int e1000_clean(struct napi_struct *napi, int budget)
 {
 	struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
-	struct net_device *poll_dev = adapter->netdev;
-	int tx_cleaned = 0, work_done = 0;
-
-	adapter = netdev_priv(poll_dev);
+	int tx_clean_complete = 0, work_done = 0;
 
-	tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
+	tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
 
-	adapter->clean_rx(adapter, &adapter->rx_ring[0],
-	                  &work_done, budget);
+	adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget);
 
-	if (!tx_cleaned)
+	if (!tx_clean_complete)
 		work_done = budget;
 
 	/* If budget not fully consumed, exit the polling mode */
@@ -3925,7 +3470,9 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 		 * sees the new next_to_clean.
 		 */
 		smp_mb();
-		if (netif_queue_stopped(netdev)) {
+
+		if (netif_queue_stopped(netdev) &&
+		    !(test_bit(__E1000_DOWN, &adapter->flags))) {
 			netif_wake_queue(netdev);
 			++adapter->restart_queue;
 		}
@@ -3935,8 +3482,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 		/* Detect a transmit hang in hardware, this serializes the
 		 * check with the clearing of time_stamp and movement of i */
 		adapter->detect_tx_hung = false;
-		if (tx_ring->buffer_info[i].time_stamp &&
-		    time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
+		if (tx_ring->buffer_info[eop].time_stamp &&
+		    time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
 		               (adapter->tx_timeout_factor * HZ))
 		    && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
 
@@ -3958,7 +3505,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 				readl(hw->hw_addr + tx_ring->tdt),
 				tx_ring->next_to_use,
 				tx_ring->next_to_clean,
-				tx_ring->buffer_info[i].time_stamp,
+				tx_ring->buffer_info[eop].time_stamp,
 				eop,
 				jiffies,
 				eop_desc->upper.fields.status);
@@ -3999,25 +3546,13 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 		return;
 	}
 	/* TCP/UDP Checksum has not been calculated */
-	if (hw->mac_type <= e1000_82547_rev_2) {
-		if (!(status & E1000_RXD_STAT_TCPCS))
-			return;
-	} else {
-		if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
-			return;
-	}
+	if (!(status & E1000_RXD_STAT_TCPCS))
+		return;
+
 	/* It must be a TCP or UDP packet with a valid checksum */
 	if (likely(status & E1000_RXD_STAT_TCPCS)) {
 		/* TCP checksum is good */
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
-	} else if (hw->mac_type > e1000_82547_rev_2) {
-		/* IP fragment with UDP payload */
-		/* Hardware complements the payload checksum, so we undo it
-		 * and then put the value in host order for further stack use.
-		 */
-		__sum16 sum = (__force __sum16)htons(csum);
-		skb->csum = csum_unfold(~sum);
-		skb->ip_summed = CHECKSUM_COMPLETE;
 	}
 	adapter->hw_csum_good++;
 }
@@ -4814,20 +4349,6 @@ void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
 	pcix_set_mmrbc(adapter->pdev, mmrbc);
 }
 
-s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
-{
-    struct e1000_adapter *adapter = hw->back;
-    u16 cap_offset;
-
-    cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
-    if (!cap_offset)
-        return -E1000_ERR_CONFIG;
-
-    pci_read_config_word(adapter->pdev, cap_offset + reg, value);
-
-    return E1000_SUCCESS;
-}
-
 void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
 {
 	outl(value, port);
@@ -4850,33 +4371,27 @@ static void e1000_vlan_rx_register(struct net_device *netdev,
 		ctrl |= E1000_CTRL_VME;
 		ew32(CTRL, ctrl);
 
-		if (adapter->hw.mac_type != e1000_ich8lan) {
-			/* enable VLAN receive filtering */
-			rctl = er32(RCTL);
-			rctl &= ~E1000_RCTL_CFIEN;
-	                if (!(netdev->flags & IFF_PROMISC))
-				rctl |= E1000_RCTL_VFE;
-			ew32(RCTL, rctl);
-			e1000_update_mng_vlan(adapter);
-		}
+		/* enable VLAN receive filtering */
+		rctl = er32(RCTL);
+		rctl &= ~E1000_RCTL_CFIEN;
+		if (!(netdev->flags & IFF_PROMISC))
+			rctl |= E1000_RCTL_VFE;
+		ew32(RCTL, rctl);
+		e1000_update_mng_vlan(adapter);
 	} else {
 		/* disable VLAN tag insert/strip */
 		ctrl = er32(CTRL);
 		ctrl &= ~E1000_CTRL_VME;
 		ew32(CTRL, ctrl);
 
-		if (adapter->hw.mac_type != e1000_ich8lan) {
-			/* disable VLAN receive filtering */
-			rctl = er32(RCTL);
-			rctl &= ~E1000_RCTL_VFE;
-			ew32(RCTL, rctl);
+		/* disable VLAN receive filtering */
+		rctl = er32(RCTL);
+		rctl &= ~E1000_RCTL_VFE;
+		ew32(RCTL, rctl);
 
-			if (adapter->mng_vlan_id !=
-			    (u16)E1000_MNG_VLAN_NONE) {
-				e1000_vlan_rx_kill_vid(netdev,
-				                       adapter->mng_vlan_id);
-				adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-			}
+		if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
+			e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+			adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
 		}
 	}
 
@@ -4913,14 +4428,6 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 	if (!test_bit(__E1000_DOWN, &adapter->flags))
 		e1000_irq_enable(adapter);
 
-	if ((hw->mng_cookie.status &
-	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
-	    (vid == adapter->mng_vlan_id)) {
-		/* release control to f/w */
-		e1000_release_hw_control(adapter);
-		return;
-	}
-
 	/* remove VID from filter table */
 	index = (vid >> 5) & 0x7F;
 	vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
@@ -5031,16 +4538,13 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		}
 
 		if (hw->media_type == e1000_media_type_fiber ||
-		   hw->media_type == e1000_media_type_internal_serdes) {
+		    hw->media_type == e1000_media_type_internal_serdes) {
 			/* keep the laser running in D3 */
 			ctrl_ext = er32(CTRL_EXT);
 			ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
 			ew32(CTRL_EXT, ctrl_ext);
 		}
 
-		/* Allow time for pending master requests to run */
-		e1000_disable_pciex_master(hw);
-
 		ew32(WUC, E1000_WUC_PME_EN);
 		ew32(WUFC, wufc);
 	} else {
@@ -5056,16 +4560,9 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 	if (adapter->en_mng_pt)
 		*enable_wake = true;
 
-	if (hw->phy_type == e1000_phy_igp_3)
-		e1000_phy_powerdown_workaround(hw);
-
 	if (netif_running(netdev))
 		e1000_free_irq(adapter);
 
-	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
-	 * would have already happened in close and is redundant. */
-	e1000_release_hw_control(adapter);
-
 	pci_disable_device(pdev);
 
 	return 0;
@@ -5131,14 +4628,6 @@ static int e1000_resume(struct pci_dev *pdev)
 
 	netif_device_attach(netdev);
 
-	/* If the controller is 82573 and f/w is AMT, do not set
-	 * DRV_LOAD until the interface is up.  For all other cases,
-	 * let the f/w know that the h/w is now under the control
-	 * of the driver. */
-	if (hw->mac_type != e1000_82573 ||
-	    !e1000_check_mng_mode(hw))
-		e1000_get_hw_control(adapter);
-
 	return 0;
 }
 #endif
@@ -5174,7 +4663,7 @@ static void e1000_netpoll(struct net_device *netdev)
 /**
  * e1000_io_error_detected - called when PCI error is detected
  * @pdev: Pointer to PCI device
- * @state: The current pci conneection state
+ * @state: The current pci connection state
  *
  * This function is called after a PCI bus error affecting
  * this device has been detected.
@@ -5243,7 +4732,6 @@ static void e1000_io_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
 
 	e1000_init_manageability(adapter);
 
@@ -5255,15 +4743,6 @@ static void e1000_io_resume(struct pci_dev *pdev)
 	}
 
 	netif_device_attach(netdev);
-
-	/* If the controller is 82573 and f/w is AMT, do not set
-	 * DRV_LOAD until the interface is up.  For all other cases,
-	 * let the f/w know that the h/w is now under the control
-	 * of the driver. */
-	if (hw->mac_type != e1000_82573 ||
-	    !e1000_check_mng_mode(hw))
-		e1000_get_hw_control(adapter);
-
 }
 
 /* e1000_main.c */
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 213437d13154..38d2741ccae9 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -518,22 +518,6 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			adapter->smart_power_down = opt.def;
 		}
 	}
-	{ /* Kumeran Lock Loss Workaround */
-		opt = (struct e1000_option) {
-			.type = enable_option,
-			.name = "Kumeran Lock Loss Workaround",
-			.err  = "defaulting to Enabled",
-			.def  = OPTION_ENABLED
-		};
-
-		if (num_KumeranLockLoss > bd) {
-			unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
-			e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
-			adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
-		} else {
-			adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def;
-		}
-	}
 
 	switch (adapter->hw.media_type) {
 	case e1000_media_type_fiber:
@@ -626,12 +610,6 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 					 .p = dplx_list }}
 		};
 
-		if (e1000_check_phy_reset_block(&adapter->hw)) {
-			DPRINTK(PROBE, INFO,
-				"Link active due to SoL/IDER Session. "
-			        "Speed/Duplex/AutoNeg parameter ignored.\n");
-			return;
-		}
 		if (num_Duplex > bd) {
 			dplx = Duplex[bd];
 			e1000_validate_option(&dplx, &opt, adapter);
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index b53b40ba88a8..d1e0563a67df 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1803,7 +1803,7 @@ struct e1000_info e1000_82574_info = {
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.pba			= 20,
-	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_bm,
@@ -1820,7 +1820,7 @@ struct e1000_info e1000_82583_info = {
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.pba			= 20,
-	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_bm,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 16c193a6c95c..0687c6aa4e46 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4982,12 +4982,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		goto err_pci_reg;
 
 	/* AER (Advanced Error Reporting) hooks */
-	err = pci_enable_pcie_error_reporting(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
-		        "0x%x\n", err);
-		/* non-fatal, continue */
-	}
+	pci_enable_pcie_error_reporting(pdev);
 
 	pci_set_master(pdev);
 	/* PCI config space info */
@@ -5263,7 +5258,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	int err;
 
 	/*
 	 * flush_scheduled work may reschedule our watchdog task, so
@@ -5299,10 +5293,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	free_netdev(netdev);
 
 	/* AER disable */
-	err = pci_disable_pcie_error_reporting(pdev);
-	if (err)
-		dev_err(&pdev->dev,
-		        "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+	pci_disable_pcie_error_reporting(pdev);
 
 	pci_disable_device(pdev);
 }
diff --git a/drivers/net/eql.c b/drivers/net/eql.c
index d4d9a3eda695..f5b96cadeb25 100644
--- a/drivers/net/eql.c
+++ b/drivers/net/eql.c
@@ -111,6 +111,7 @@
  * Sorry, I had to rewrite most of this for 2.5.x -DaveM
  */
 
+#include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index b7311bc00258..f7d9ac8324cb 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -17,8 +17,13 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 #include <net/ethoc.h>
 
+static int buffer_size = 0x8000; /* 32 KBytes */
+module_param(buffer_size, int, 0);
+MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size");
+
 /* register offsets */
 #define	MODER		0x00
 #define	INT_SOURCE	0x04
@@ -167,6 +172,7 @@
  * struct ethoc - driver-private device structure
  * @iobase:	pointer to I/O memory region
  * @membase:	pointer to buffer memory region
+ * @dma_alloc:	dma allocated buffer size
  * @num_tx:	number of send buffers
  * @cur_tx:	last send buffer written
  * @dty_tx:	last buffer actually sent
@@ -185,6 +191,7 @@
 struct ethoc {
 	void __iomem *iobase;
 	void __iomem *membase;
+	int dma_alloc;
 
 	unsigned int num_tx;
 	unsigned int cur_tx;
@@ -216,24 +223,25 @@ struct ethoc_bd {
 	u32 addr;
 };
 
-static u32 ethoc_read(struct ethoc *dev, loff_t offset)
+static inline u32 ethoc_read(struct ethoc *dev, loff_t offset)
 {
 	return ioread32(dev->iobase + offset);
 }
 
-static void ethoc_write(struct ethoc *dev, loff_t offset, u32 data)
+static inline void ethoc_write(struct ethoc *dev, loff_t offset, u32 data)
 {
 	iowrite32(data, dev->iobase + offset);
 }
 
-static void ethoc_read_bd(struct ethoc *dev, int index, struct ethoc_bd *bd)
+static inline void ethoc_read_bd(struct ethoc *dev, int index,
+		struct ethoc_bd *bd)
 {
 	loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd));
 	bd->stat = ethoc_read(dev, offset + 0);
 	bd->addr = ethoc_read(dev, offset + 4);
 }
 
-static void ethoc_write_bd(struct ethoc *dev, int index,
+static inline void ethoc_write_bd(struct ethoc *dev, int index,
 		const struct ethoc_bd *bd)
 {
 	loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd));
@@ -241,33 +249,33 @@ static void ethoc_write_bd(struct ethoc *dev, int index,
 	ethoc_write(dev, offset + 4, bd->addr);
 }
 
-static void ethoc_enable_irq(struct ethoc *dev, u32 mask)
+static inline void ethoc_enable_irq(struct ethoc *dev, u32 mask)
 {
 	u32 imask = ethoc_read(dev, INT_MASK);
 	imask |= mask;
 	ethoc_write(dev, INT_MASK, imask);
 }
 
-static void ethoc_disable_irq(struct ethoc *dev, u32 mask)
+static inline void ethoc_disable_irq(struct ethoc *dev, u32 mask)
 {
 	u32 imask = ethoc_read(dev, INT_MASK);
 	imask &= ~mask;
 	ethoc_write(dev, INT_MASK, imask);
 }
 
-static void ethoc_ack_irq(struct ethoc *dev, u32 mask)
+static inline void ethoc_ack_irq(struct ethoc *dev, u32 mask)
 {
 	ethoc_write(dev, INT_SOURCE, mask);
 }
 
-static void ethoc_enable_rx_and_tx(struct ethoc *dev)
+static inline void ethoc_enable_rx_and_tx(struct ethoc *dev)
 {
 	u32 mode = ethoc_read(dev, MODER);
 	mode |= MODER_RXEN | MODER_TXEN;
 	ethoc_write(dev, MODER, mode);
 }
 
-static void ethoc_disable_rx_and_tx(struct ethoc *dev)
+static inline void ethoc_disable_rx_and_tx(struct ethoc *dev)
 {
 	u32 mode = ethoc_read(dev, MODER);
 	mode &= ~(MODER_RXEN | MODER_TXEN);
@@ -284,7 +292,7 @@ static int ethoc_init_ring(struct ethoc *dev)
 	dev->cur_rx = 0;
 
 	/* setup transmission buffers */
-	bd.addr = 0;
+	bd.addr = virt_to_phys(dev->membase);
 	bd.stat = TX_BD_IRQ | TX_BD_CRC;
 
 	for (i = 0; i < dev->num_tx; i++) {
@@ -295,7 +303,6 @@ static int ethoc_init_ring(struct ethoc *dev)
 		bd.addr += ETHOC_BUFSIZ;
 	}
 
-	bd.addr = dev->num_tx * ETHOC_BUFSIZ;
 	bd.stat = RX_BD_EMPTY | RX_BD_IRQ;
 
 	for (i = 0; i < dev->num_rx; i++) {
@@ -400,8 +407,12 @@ static int ethoc_rx(struct net_device *dev, int limit)
 		if (ethoc_update_rx_stats(priv, &bd) == 0) {
 			int size = bd.stat >> 16;
 			struct sk_buff *skb = netdev_alloc_skb(dev, size);
+
+			size -= 4; /* strip the CRC */
+			skb_reserve(skb, 2); /* align TCP/IP header */
+
 			if (likely(skb)) {
-				void *src = priv->membase + bd.addr;
+				void *src = phys_to_virt(bd.addr);
 				memcpy_fromio(skb_put(skb, size), src, size);
 				skb->protocol = eth_type_trans(skb, dev);
 				priv->stats.rx_packets++;
@@ -498,7 +509,7 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id)
 		return IRQ_NONE;
 	}
 
-	ethoc_ack_irq(priv, INT_MASK_ALL);
+	ethoc_ack_irq(priv, pending);
 
 	if (pending & INT_MASK_BUSY) {
 		dev_err(&dev->dev, "packet dropped\n");
@@ -653,9 +664,10 @@ static int ethoc_open(struct net_device *dev)
 	if (ret)
 		return ret;
 
-	/* calculate the number of TX/RX buffers */
-	num_bd = (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ;
-	priv->num_tx = min(min_tx, num_bd / 4);
+	/* calculate the number of TX/RX buffers, maximum 128 supported */
+	num_bd = min_t(unsigned int,
+		128, (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ);
+	priv->num_tx = max(min_tx, num_bd / 4);
 	priv->num_rx = num_bd - priv->num_tx;
 	ethoc_write(priv, TX_BD_NUM, priv->num_tx);
 
@@ -823,7 +835,7 @@ static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	else
 		bd.stat &= ~TX_BD_PAD;
 
-	dest = priv->membase + bd.addr;
+	dest = phys_to_virt(bd.addr);
 	memcpy_toio(dest, skb->data, skb->len);
 
 	bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK);
@@ -903,22 +915,19 @@ static int ethoc_probe(struct platform_device *pdev)
 
 	/* obtain buffer memory space */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot obtain memory space\n");
-		ret = -ENXIO;
-		goto free;
-	}
-
-	mem = devm_request_mem_region(&pdev->dev, res->start,
+	if (res) {
+		mem = devm_request_mem_region(&pdev->dev, res->start,
 			res->end - res->start + 1, res->name);
-	if (!mem) {
-		dev_err(&pdev->dev, "cannot request memory space\n");
-		ret = -ENXIO;
-		goto free;
+		if (!mem) {
+			dev_err(&pdev->dev, "cannot request memory space\n");
+			ret = -ENXIO;
+			goto free;
+		}
+
+		netdev->mem_start = mem->start;
+		netdev->mem_end   = mem->end;
 	}
 
-	netdev->mem_start = mem->start;
-	netdev->mem_end   = mem->end;
 
 	/* obtain device IRQ number */
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -933,6 +942,7 @@ static int ethoc_probe(struct platform_device *pdev)
 	/* setup driver-private data */
 	priv = netdev_priv(netdev);
 	priv->netdev = netdev;
+	priv->dma_alloc = 0;
 
 	priv->iobase = devm_ioremap_nocache(&pdev->dev, netdev->base_addr,
 			mmio->end - mmio->start + 1);
@@ -942,12 +952,27 @@ static int ethoc_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	priv->membase = devm_ioremap_nocache(&pdev->dev, netdev->mem_start,
-			mem->end - mem->start + 1);
-	if (!priv->membase) {
-		dev_err(&pdev->dev, "cannot remap memory space\n");
-		ret = -ENXIO;
-		goto error;
+	if (netdev->mem_end) {
+		priv->membase = devm_ioremap_nocache(&pdev->dev,
+			netdev->mem_start, mem->end - mem->start + 1);
+		if (!priv->membase) {
+			dev_err(&pdev->dev, "cannot remap memory space\n");
+			ret = -ENXIO;
+			goto error;
+		}
+	} else {
+		/* Allocate buffer memory */
+		priv->membase = dma_alloc_coherent(NULL,
+			buffer_size, (void *)&netdev->mem_start,
+			GFP_KERNEL);
+		if (!priv->membase) {
+			dev_err(&pdev->dev, "cannot allocate %dB buffer\n",
+				buffer_size);
+			ret = -ENOMEM;
+			goto error;
+		}
+		netdev->mem_end = netdev->mem_start + buffer_size;
+		priv->dma_alloc = buffer_size;
 	}
 
 	/* Allow the platform setup code to pass in a MAC address. */
@@ -1034,6 +1059,9 @@ free_mdio:
 	kfree(priv->mdio->irq);
 	mdiobus_free(priv->mdio);
 free:
+	if (priv->dma_alloc)
+		dma_free_coherent(NULL, priv->dma_alloc, priv->membase,
+			netdev->mem_start);
 	free_netdev(netdev);
 out:
 	return ret;
@@ -1059,7 +1087,9 @@ static int ethoc_remove(struct platform_device *pdev)
 			kfree(priv->mdio->irq);
 			mdiobus_free(priv->mdio);
 		}
-
+		if (priv->dma_alloc)
+			dma_free_coherent(NULL, priv->dma_alloc, priv->membase,
+				netdev->mem_start);
 		unregister_netdev(netdev);
 		free_netdev(netdev);
 	}
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index b2a5ec8f3721..dd4ba01fd92d 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -145,6 +145,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 29234380e6c6..16a1d58419d9 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1654,7 +1654,7 @@ static const struct net_device_ops fec_netdev_ops = {
   *
   * index is only used in legacy code
   */
-int __init fec_enet_init(struct net_device *dev, int index)
+static int fec_enet_init(struct net_device *dev, int index)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 	struct bufdesc *cbd_base;
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index c40113f58963..66dace6d324f 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -759,12 +759,6 @@ static void mpc52xx_fec_reset(struct net_device *dev)
 
 	mpc52xx_fec_hw_init(dev);
 
-	if (priv->phydev) {
-		phy_stop(priv->phydev);
-		phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
-		phy_start(priv->phydev);
-	}
-
 	bcom_fec_rx_reset(priv->rx_dmatsk);
 	bcom_fec_tx_reset(priv->tx_dmatsk);
 
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index 31e6d62b785d..ee0f3c6d3f88 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -155,6 +155,7 @@ static struct of_device_id mpc52xx_fec_mdio_match[] = {
 	{ .compatible = "mpc5200b-fec-phy", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, mpc52xx_fec_mdio_match);
 
 struct of_platform_driver mpc52xx_fec_mdio_driver = {
 	.name = "mpc5200b-fec-phy",
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 0a1c2bb27d4d..e1da4666f204 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -49,6 +49,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/ethtool.h>
 #include <linux/timer.h>
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 2bc2d2b20644..ec2f5034457f 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1110,6 +1110,7 @@ static struct of_device_id fs_enet_match[] = {
 #endif
 	{}
 };
+MODULE_DEVICE_TABLE(of, fs_enet_match);
 
 static struct of_platform_driver fs_enet_driver = {
 	.name	= "fs_enet",
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
index 93b481b0e3c7..24ff9f43a62b 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -221,6 +221,7 @@ static struct of_device_id fs_enet_mdio_bb_match[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, fs_enet_mdio_bb_match);
 
 static struct of_platform_driver fs_enet_bb_mdio_driver = {
 	.name = "fsl-bb-mdio",
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index a2d69c1cd07e..96eba4280c5c 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -219,6 +219,7 @@ static struct of_device_id fs_enet_mdio_fec_match[] = {
 #endif
 	{},
 };
+MODULE_DEVICE_TABLE(of, fs_enet_mdio_fec_match);
 
 static struct of_platform_driver fs_enet_fec_mdio_driver = {
 	.name = "fsl-fec-mdio",
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index d167090248e2..6ac464866972 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -407,6 +407,7 @@ static struct of_device_id fsl_pq_mdio_match[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match);
 
 static struct of_platform_driver fsl_pq_mdio_driver = {
 	.name = "fsl-pq_mdio",
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 1e5289ffef6f..5bf31f1509c9 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2325,9 +2325,6 @@ static irqreturn_t gfar_error(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:fsl-gianfar");
-
 static struct of_device_id gfar_match[] =
 {
 	{
@@ -2336,6 +2333,7 @@ static struct of_device_id gfar_match[] =
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, gfar_match);
 
 /* Structure for a device driver */
 static struct of_platform_driver gfar_driver = {
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 1d5064a09aca..f7519a594945 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -145,6 +145,7 @@ static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 /* Time in jiffies before concluding the transmitter is hung. */
 #define TX_TIMEOUT  (5*HZ)
 
+#include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 7bcaf7c66243..e344c84c0ef9 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -44,6 +44,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/workqueue.h>
 #include <linux/fs.h>
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index aa4488e871b2..ed60fd664273 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -71,6 +71,7 @@
 
 /*****************************************************************************/
 
+#include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/string.h>
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index 88c593596020..1686f6dcbbce 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -61,6 +61,7 @@
 
 /*****************************************************************************/
 
+#include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/string.h>
diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c
index 0013c409782c..91c5790c9581 100644
--- a/drivers/net/hamradio/hdlcdrv.c
+++ b/drivers/net/hamradio/hdlcdrv.c
@@ -42,6 +42,7 @@
 
 /*****************************************************************************/
 
+#include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/net.h>
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 33b55f729742..db4b7f1603f6 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -258,7 +258,7 @@ static void ax_bump(struct mkiss *ax)
 			}
 			if (ax->crcmode != CRC_MODE_SMACK && ax->crcauto) {
 				printk(KERN_INFO
-				       "mkiss: %s: Switchting to crc-smack\n",
+				       "mkiss: %s: Switching to crc-smack\n",
 				       ax->dev->name);
 				ax->crcmode = CRC_MODE_SMACK;
 			}
@@ -272,7 +272,7 @@ static void ax_bump(struct mkiss *ax)
 			}
 			if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) {
 				printk(KERN_INFO
-				       "mkiss: %s: Switchting to crc-flexnet\n",
+				       "mkiss: %s: Switching to crc-flexnet\n",
 				       ax->dev->name);
 				ax->crcmode = CRC_MODE_FLEX;
 			}
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index a9a1a99f02dd..dd8665138062 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -98,6 +98,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 89c82c5e63e4..3fae87559791 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -24,6 +24,7 @@
  *
  */
 
+#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/errno.h>
@@ -443,7 +444,7 @@ static u32 __emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_s
 		ret |= EMAC_MR1_TFS_2K;
 		break;
 	default:
-		printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
+		printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n",
 		       dev->ndev->name, tx_size);
 	}
 
@@ -470,6 +471,9 @@ static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_
 	DBG2(dev, "__emac4_calc_base_mr1" NL);
 
 	switch(tx_size) {
+	case 16384:
+		ret |= EMAC4_MR1_TFS_16K;
+		break;
 	case 4096:
 		ret |= EMAC4_MR1_TFS_4K;
 		break;
@@ -477,7 +481,7 @@ static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_
 		ret |= EMAC4_MR1_TFS_2K;
 		break;
 	default:
-		printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
+		printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n",
 		       dev->ndev->name, tx_size);
 	}
 
@@ -2985,6 +2989,7 @@ static struct of_device_id emac_match[] =
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, emac_match);
 
 static struct of_platform_driver emac_driver = {
 	.name = "emac",
diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h
index 0afc2cf5c52b..d34adf99fc6a 100644
--- a/drivers/net/ibm_newemac/emac.h
+++ b/drivers/net/ibm_newemac/emac.h
@@ -153,6 +153,7 @@ struct emac_regs {
 #define EMAC4_MR1_RFS_16K		0x00280000
 #define EMAC4_MR1_TFS_2K       		0x00020000
 #define EMAC4_MR1_TFS_4K		0x00030000
+#define EMAC4_MR1_TFS_16K		0x00050000
 #define EMAC4_MR1_TR			0x00008000
 #define EMAC4_MR1_MWSW_001		0x00001000
 #define EMAC4_MR1_JPSM			0x00000800
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index d004c359244c..deaea8fa1032 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -34,6 +34,7 @@
 #include <linux/interrupt.h>
 #include <linux/if_ether.h>
 #include <linux/ethtool.h>
+#include <linux/sched.h>
 
 #include "igb.h"
 
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 5d6c1530a8c0..714c3a4a44ef 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1246,12 +1246,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_pci_reg;
 
-	err = pci_enable_pcie_error_reporting(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
-		        "0x%x\n", err);
-		/* non-fatal, continue */
-	}
+	pci_enable_pcie_error_reporting(pdev);
 
 	pci_set_master(pdev);
 	pci_save_state(pdev);
@@ -1628,7 +1623,6 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	int err;
 
 	/* flush_scheduled work may reschedule our watchdog task, so
 	 * explicitly disable watchdog tasks from being rescheduled  */
@@ -1682,10 +1676,7 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 
 	free_netdev(netdev);
 
-	err = pci_disable_pcie_error_reporting(pdev);
-	if (err)
-		dev_err(&pdev->dev,
-		        "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+	pci_disable_pcie_error_reporting(pdev);
 
 	pci_disable_device(pdev);
 }
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 38bf7cf2256d..c412e8026173 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -232,8 +232,11 @@ static int sa1100_irda_startup(struct sa1100_irda *si)
 	/*
 	 * Ensure that the ports for this device are setup correctly.
 	 */
-	if (si->pdata->startup)
-		si->pdata->startup(si->dev);
+	if (si->pdata->startup)	{
+		ret = si->pdata->startup(si->dev);
+		if (ret)
+			return ret;
+	}
 
 	/*
 	 * Configure PPC for IRDA - we want to drive TXD2 low.
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index fcf287b749db..99e1ec02a011 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -120,6 +120,7 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 
 #include <net/irda/irda.h>
 
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index e36e951cbc65..aa7286bc4364 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -495,7 +495,7 @@ static void veth_take_cap_ack(struct veth_lpar_connection *cnx,
 			   cnx->remote_lp);
 	} else {
 		memcpy(&cnx->cap_ack_event, event,
-		       sizeof(&cnx->cap_ack_event));
+		       sizeof(cnx->cap_ack_event));
 		cnx->state |= VETH_STATE_GOTCAPACK;
 		veth_kick_statemachine(cnx);
 	}
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 56b12f3192f1..e2d5343f1275 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -425,7 +425,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = -IXGBE_ERR_CONFIG;
+		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
 		break;
 	}
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 2ec58dcdb82b..34b04924c8a1 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -330,6 +330,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 
 	switch (hw->device_id) {
 	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_KX4_MEZZ:
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
 	case IXGBE_DEV_ID_82599_XAUI_LOM:
 		/* Default device ID is mezzanine card KX/KX4 */
 		media_type = ixgbe_media_type_backplane;
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 6621e172df3d..40ff120a9ad4 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1355,9 +1355,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
 /**
  *  ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
  *  @hw: pointer to hardware structure
- *  @addr_list: the list of new addresses
- *  @addr_count: number of addresses
- *  @next: iterator function to walk the address list
+ *  @uc_list: the list of new addresses
  *
  *  The given list replaces any existing list.  Clears the secondary addrs from
  *  receive address registers.  Uses unused receive address registers for the
@@ -1663,7 +1661,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = -IXGBE_ERR_CONFIG;
+		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
 		break;
 	}
@@ -1734,75 +1732,140 @@ s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 	s32 ret_val = 0;
 	ixgbe_link_speed speed;
 	u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+	u32 links2, anlp1_reg, autoc_reg, links;
 	bool link_up;
 
 	/*
 	 * AN should have completed when the cable was plugged in.
 	 * Look for reasons to bail out.  Bail out if:
 	 * - FC autoneg is disabled, or if
-	 * - we don't have multispeed fiber, or if
-	 * - we're not running at 1G, or if
-	 * - link is not up, or if
-	 * - link is up but AN did not complete, or if
-	 * - link is up and AN completed but timed out
+	 * - link is not up.
 	 *
-	 * Since we're being called from an LSC, link is already know to be up.
+	 * Since we're being called from an LSC, link is already known to be up.
 	 * So use link_up_wait_to_complete=false.
 	 */
 	hw->mac.ops.check_link(hw, &speed, &link_up, false);
-	linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
-
-	if (hw->fc.disable_fc_autoneg ||
-	    !hw->phy.multispeed_fiber ||
-	    (speed != IXGBE_LINK_SPEED_1GB_FULL) ||
-	    !link_up ||
-	    ((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
-	    ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+
+	if (hw->fc.disable_fc_autoneg || (!link_up)) {
 		hw->fc.fc_was_autonegged = false;
 		hw->fc.current_mode = hw->fc.requested_mode;
-		hw_dbg(hw, "Autoneg FC was skipped.\n");
 		goto out;
 	}
 
 	/*
+	 * On backplane, bail out if
+	 * - backplane autoneg was not completed, or if
+	 * - link partner is not AN enabled
+	 */
+	if (hw->phy.media_type == ixgbe_media_type_backplane) {
+		links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+		links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+		if (((links & IXGBE_LINKS_KX_AN_COMP) == 0) ||
+		    ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0)) {
+			hw->fc.fc_was_autonegged = false;
+			hw->fc.current_mode = hw->fc.requested_mode;
+			goto out;
+		}
+	}
+
+	/*
+	 * On multispeed fiber at 1g, bail out if
+	 * - link is up but AN did not complete, or if
+	 * - link is up and AN completed but timed out
+	 */
+	if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) {
+		linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+		if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+		    ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+			hw->fc.fc_was_autonegged = false;
+			hw->fc.current_mode = hw->fc.requested_mode;
+			goto out;
+		}
+	}
+
+	/*
 	 * Read the AN advertisement and LP ability registers and resolve
 	 * local flow control settings accordingly
 	 */
-	pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
-	pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
-	if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+	if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+	    (hw->phy.media_type != ixgbe_media_type_backplane)) {
+		pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+		pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+		if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+		    (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+			/*
+			 * Now we need to check if the user selected Rx ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise RX
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == ixgbe_fc_full) {
+				hw->fc.current_mode = ixgbe_fc_full;
+				hw_dbg(hw, "Flow Control = FULL.\n");
+			} else {
+				hw->fc.current_mode = ixgbe_fc_rx_pause;
+				hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+			}
+		} else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+			   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+			   (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+			   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+			hw->fc.current_mode = ixgbe_fc_tx_pause;
+			hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+		} else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+			   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+			   !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+			   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+			hw->fc.current_mode = ixgbe_fc_rx_pause;
+			hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+		} else {
+			hw->fc.current_mode = ixgbe_fc_none;
+			hw_dbg(hw, "Flow Control = NONE.\n");
+		}
+	}
+
+	if (hw->phy.media_type == ixgbe_media_type_backplane) {
 		/*
-		 * Now we need to check if the user selected Rx ONLY
-		 * of pause frames.  In this case, we had to advertise
-		 * FULL flow control because we could not advertise RX
-		 * ONLY. Hence, we must now check to see if we need to
-		 * turn OFF the TRANSMISSION of PAUSE frames.
+		 * Read the 10g AN autoc and LP ability registers and resolve
+		 * local flow control settings accordingly
 		 */
-		if (hw->fc.requested_mode == ixgbe_fc_full) {
-			hw->fc.current_mode = ixgbe_fc_full;
-			hw_dbg(hw, "Flow Control = FULL.\n");
-		} else {
+		autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+		anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+
+		if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+		    (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE)) {
+			/*
+			 * Now we need to check if the user selected Rx ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise RX
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == ixgbe_fc_full) {
+				hw->fc.current_mode = ixgbe_fc_full;
+				hw_dbg(hw, "Flow Control = FULL.\n");
+			} else {
+				hw->fc.current_mode = ixgbe_fc_rx_pause;
+				hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+			}
+		} else if (!(autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+			   (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+			   (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+			   (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
+			hw->fc.current_mode = ixgbe_fc_tx_pause;
+			hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+		} else if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+			   (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+			   !(anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+			   (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
 			hw->fc.current_mode = ixgbe_fc_rx_pause;
 			hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+		} else {
+			hw->fc.current_mode = ixgbe_fc_none;
+			hw_dbg(hw, "Flow Control = NONE.\n");
 		}
-	} else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
-		   (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
-		hw->fc.current_mode = ixgbe_fc_tx_pause;
-		hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
-	} else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
-		   !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
-		hw->fc.current_mode = ixgbe_fc_rx_pause;
-		hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
-	} else {
-		hw->fc.current_mode = ixgbe_fc_none;
-		hw_dbg(hw, "Flow Control = NONE.\n");
 	}
-
 	/* Record that current_mode is the result of a successful autoneg */
 	hw->fc.fc_was_autonegged = true;
 
@@ -1919,7 +1982,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = -IXGBE_ERR_CONFIG;
+		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
 		break;
 	}
@@ -1927,9 +1990,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 	IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
 	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
 
-	/* Enable and restart autoneg to inform the link partner */
-	reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART;
-
 	/* Disable AN timeout */
 	if (hw->fc.strict_ieee)
 		reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
@@ -1937,6 +1997,70 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 	IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
 	hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
 
+	/*
+	 * Set up the 10G flow control advertisement registers so the HW
+	 * can do fc autoneg once the cable is plugged in.  If we end up
+	 * using 1g instead, this is harmless.
+	 */
+	reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	/*
+	 * The possible values of fc.requested_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_none:
+		/* Flow control completely disabled by software override. */
+		reg &= ~(IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+		reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		reg |= (IXGBE_AUTOC_ASM_PAUSE);
+		reg &= ~(IXGBE_AUTOC_SYM_PAUSE);
+		break;
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+		break;
+#ifdef CONFIG_DCB
+	case ixgbe_fc_pfc:
+		goto out;
+		break;
+#endif /* CONFIG_DCB */
+	default:
+		hw_dbg(hw, "Flow control param set incorrectly\n");
+		ret_val = IXGBE_ERR_CONFIG;
+		goto out;
+		break;
+	}
+	/*
+	 * AUTOC restart handles negotiation of 1G and 10G. There is
+	 * no need to set the PCS1GCTL register.
+	 */
+	reg |= IXGBE_AUTOC_AN_RESTART;
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg);
+	hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
+
 out:
 	return ret_val;
 }
@@ -2000,7 +2124,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 
 	while (timeout) {
 		if (ixgbe_get_eeprom_semaphore(hw))
-			return -IXGBE_ERR_SWFW_SYNC;
+			return IXGBE_ERR_SWFW_SYNC;
 
 		gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
 		if (!(gssr & (fwmask | swmask)))
@@ -2017,7 +2141,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 
 	if (!timeout) {
 		hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n");
-		return -IXGBE_ERR_SWFW_SYNC;
+		return IXGBE_ERR_SWFW_SYNC;
 	}
 
 	gssr |= swmask;
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 53b0a6680254..fa314cb005a4 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -53,6 +53,10 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"tx_packets", IXGBE_STAT(net_stats.tx_packets)},
 	{"rx_bytes", IXGBE_STAT(net_stats.rx_bytes)},
 	{"tx_bytes", IXGBE_STAT(net_stats.tx_bytes)},
+	{"rx_pkts_nic", IXGBE_STAT(stats.gprc)},
+	{"tx_pkts_nic", IXGBE_STAT(stats.gptc)},
+	{"rx_bytes_nic", IXGBE_STAT(stats.gorc)},
+	{"tx_bytes_nic", IXGBE_STAT(stats.gotc)},
 	{"lsc_int", IXGBE_STAT(lsc_int)},
 	{"tx_busy", IXGBE_STAT(tx_busy)},
 	{"non_eop_descs", IXGBE_STAT(non_eop_descs)},
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index c407bd9de0dd..cbb143ca1eb8 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -49,7 +49,7 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
                               "Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "2.0.37-k2"
+#define DRV_VERSION "2.0.44-k2"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
 
@@ -97,8 +97,12 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ),
+	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
+	 board_82599 },
 
 	/* required last entry */
 	{0, }
@@ -1885,12 +1889,29 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0);
 		adapter->tx_ring[i].head = IXGBE_TDH(j);
 		adapter->tx_ring[i].tail = IXGBE_TDT(j);
-		/* Disable Tx Head Writeback RO bit, since this hoses
+		/*
+		 * Disable Tx Head Writeback RO bit, since this hoses
 		 * bookkeeping if things aren't delivered in order.
 		 */
-		txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
+			break;
+		case ixgbe_mac_82599EB:
+		default:
+			txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(j));
+			break;
+		}
 		txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
+			break;
+		case ixgbe_mac_82599EB:
+		default:
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(j), txctrl);
+			break;
+		}
 	}
 	if (hw->mac.type == ixgbe_mac_82599EB) {
 		/* We enable 8 traffic classes, DCB only */
@@ -4432,10 +4453,13 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 
 	/* 82598 hardware only has a 32 bit counter in the high register */
 	if (hw->mac.type == ixgbe_mac_82599EB) {
+		u64 tmp;
 		adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
-		IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
+		tmp = IXGBE_READ_REG(hw, IXGBE_GORCH) & 0xF; /* 4 high bits of GORC */
+		adapter->stats.gorc += (tmp << 32);
 		adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
-		IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */
+		tmp = IXGBE_READ_REG(hw, IXGBE_GOTCH) & 0xF; /* 4 high bits of GOTC */
+		adapter->stats.gotc += (tmp << 32);
 		adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL);
 		IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
 		adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
@@ -5071,7 +5095,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
 	/* Right now, we support IPv4 only */
 	struct ixgbe_atr_input atr_input;
 	struct tcphdr *th;
-	struct udphdr *uh;
 	struct iphdr *iph = ip_hdr(skb);
 	struct ethhdr *eth = (struct ethhdr *)skb->data;
 	u16 vlan_id, src_port, dst_port, flex_bytes;
@@ -5085,12 +5108,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
 		dst_port = th->dest;
 		l4type |= IXGBE_ATR_L4TYPE_TCP;
 		/* l4type IPv4 type is 0, no need to assign */
-	} else if(iph->protocol == IPPROTO_UDP) {
-		uh = udp_hdr(skb);
-		src_port = uh->source;
-		dst_port = uh->dest;
-		l4type |= IXGBE_ATR_L4TYPE_UDP;
-		/* l4type IPv4 type is 0, no need to assign */
 	} else {
 		/* Unsupported L4 header, just bail here */
 		return;
@@ -5494,12 +5511,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		goto err_pci_reg;
 	}
 
-	err = pci_enable_pcie_error_reporting(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
-		                    "0x%x\n", err);
-		/* non-fatal, continue */
-	}
+	pci_enable_pcie_error_reporting(pdev);
 
 	pci_set_master(pdev);
 	pci_save_state(pdev);
@@ -5808,7 +5820,6 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	int err;
 
 	set_bit(__IXGBE_DOWN, &adapter->state);
 	/* clear the module not found bit to make sure the worker won't
@@ -5859,10 +5870,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 
 	free_netdev(netdev);
 
-	err = pci_disable_pcie_error_reporting(pdev);
-	if (err)
-		dev_err(&pdev->dev,
-		        "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+	pci_disable_pcie_error_reporting(pdev);
 
 	pci_disable_device(pdev);
 }
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 8761d7899f7d..ef4bdd58e016 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -49,9 +49,11 @@
 #define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM      0x10E1
 #define IXGBE_DEV_ID_82598EB_XF_LR       0x10F4
 #define IXGBE_DEV_ID_82599_KX4           0x10F7
+#define IXGBE_DEV_ID_82599_KX4_MEZZ      0x1514
 #define IXGBE_DEV_ID_82599_CX4           0x10F9
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
+#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
 
 /* General Registers */
 #define IXGBE_CTRL      0x00000
@@ -1336,6 +1338,8 @@
 #define IXGBE_AUTOC_KX4_SUPP    0x80000000
 #define IXGBE_AUTOC_KX_SUPP     0x40000000
 #define IXGBE_AUTOC_PAUSE       0x30000000
+#define IXGBE_AUTOC_ASM_PAUSE   0x20000000
+#define IXGBE_AUTOC_SYM_PAUSE   0x10000000
 #define IXGBE_AUTOC_RF          0x08000000
 #define IXGBE_AUTOC_PD_TMR      0x06000000
 #define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
@@ -1404,6 +1408,8 @@
 #define IXGBE_LINK_UP_TIME      90 /* 9.0 Seconds */
 #define IXGBE_AUTO_NEG_TIME     45 /* 4.5 Seconds */
 
+#define IXGBE_LINKS2_AN_SUPPORTED   0x00000040
+
 /* PCS1GLSTA Bit Masks */
 #define IXGBE_PCS1GLSTA_LINK_OK         1
 #define IXGBE_PCS1GLSTA_SYNK_OK         0x10
@@ -1424,6 +1430,11 @@
 #define IXGBE_PCS1GLCTL_AN_ENABLE       0x10000
 #define IXGBE_PCS1GLCTL_AN_RESTART      0x20000
 
+/* ANLP1 Bit Masks */
+#define IXGBE_ANLP1_PAUSE               0x0C00
+#define IXGBE_ANLP1_SYM_PAUSE           0x0400
+#define IXGBE_ANLP1_ASM_PAUSE           0x0800
+
 /* SW Semaphore Register bitmasks */
 #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
 #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
index b02a981c87a8..34a6cfd17930 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@@ -119,24 +119,9 @@ static struct ixp2400_msf_parameters enp2611_msf_parameters =
 	}
 };
 
-struct enp2611_ixpdev_priv
-{
-	struct ixpdev_priv		ixpdev_priv;
-	struct net_device_stats		stats;
-};
-
 static struct net_device *nds[3];
 static struct timer_list link_check_timer;
 
-static struct net_device_stats *enp2611_get_stats(struct net_device *dev)
-{
-	struct enp2611_ixpdev_priv *ip = netdev_priv(dev);
-
-	pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats));
-
-	return &(ip->stats);
-}
-
 /* @@@ Poll the SFP moddef0 line too.  */
 /* @@@ Try to use the pm3386 DOOL interrupt as well.  */
 static void enp2611_check_link_status(unsigned long __dummy)
@@ -203,14 +188,13 @@ static int __init enp2611_init_module(void)
 
 	ports = pm3386_port_count();
 	for (i = 0; i < ports; i++) {
-		nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
+		nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv));
 		if (nds[i] == NULL) {
 			while (--i >= 0)
 				free_netdev(nds[i]);
 			return -ENOMEM;
 		}
 
-		nds[i]->get_stats = enp2611_get_stats;
 		pm3386_init_port(i);
 		pm3386_get_mac(i, nds[i]->dev_addr);
 	}
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 127243461a51..9aee0cc922c9 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -21,6 +21,7 @@
 #include "ixp2400_tx.ucode"
 #include "ixpdev_priv.h"
 #include "ixpdev.h"
+#include "pm3386.h"
 
 #define DRV_MODULE_VERSION	"0.2"
 
@@ -271,6 +272,15 @@ static int ixpdev_close(struct net_device *dev)
 	return 0;
 }
 
+static struct net_device_stats *ixpdev_get_stats(struct net_device *dev)
+{
+	struct ixpdev_priv *ip = netdev_priv(dev);
+
+	pm3386_get_stats(ip->channel, &(dev->stats));
+
+	return &(dev->stats);
+}
+
 static const struct net_device_ops ixpdev_netdev_ops = {
 	.ndo_open		= ixpdev_open,
 	.ndo_stop		= ixpdev_close,
@@ -278,6 +288,7 @@ static const struct net_device_ops ixpdev_netdev_ops = {
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_get_stats		= ixpdev_get_stats,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ixpdev_poll_controller,
 #endif
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 237835864357..a23f739d222f 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -171,6 +171,36 @@ static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val)
 }
 
 /**
+ * ks8851_wrreg8 - write 8bit register value to chip
+ * @ks: The chip state
+ * @reg: The register address
+ * @val: The value to write
+ *
+ * Issue a write to put the value @val into the register specified in @reg.
+ */
+static void ks8851_wrreg8(struct ks8851_net *ks, unsigned reg, unsigned val)
+{
+	struct spi_transfer *xfer = &ks->spi_xfer1;
+	struct spi_message *msg = &ks->spi_msg1;
+	__le16 txb[2];
+	int ret;
+	int bit;
+
+	bit = 1 << (reg & 3);
+
+	txb[0] = cpu_to_le16(MK_OP(bit, reg) | KS_SPIOP_WR);
+	txb[1] = val;
+
+	xfer->tx_buf = txb;
+	xfer->rx_buf = NULL;
+	xfer->len = 3;
+
+	ret = spi_sync(ks->spidev, msg);
+	if (ret < 0)
+		ks_err(ks, "spi_sync() failed\n");
+}
+
+/**
  * ks8851_rx_1msg - select whether to use one or two messages for spi read
  * @ks: The device structure
  *
@@ -322,13 +352,12 @@ static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op)
 static int ks8851_write_mac_addr(struct net_device *dev)
 {
 	struct ks8851_net *ks = netdev_priv(dev);
-	u16 *mcp = (u16 *)dev->dev_addr;
+	int i;
 
 	mutex_lock(&ks->lock);
 
-	ks8851_wrreg16(ks, KS_MARL, mcp[0]);
-	ks8851_wrreg16(ks, KS_MARM, mcp[1]);
-	ks8851_wrreg16(ks, KS_MARH, mcp[2]);
+	for (i = 0; i < ETH_ALEN; i++)
+		ks8851_wrreg8(ks, KS_MAR(i), dev->dev_addr[i]);
 
 	mutex_unlock(&ks->lock);
 
@@ -951,7 +980,7 @@ static void ks8851_set_rx_mode(struct net_device *dev)
 			mcptr = mcptr->next;
 		}
 
-		rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA;
+		rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXPAFMA;
 	} else {
 		/* just accept broadcast / unicast */
 		rxctrl.rxcr1 = RXCR1_RXPAFMA;
@@ -1239,6 +1268,9 @@ static int __devinit ks8851_probe(struct spi_device *spi)
 	ndev->netdev_ops = &ks8851_netdev_ops;
 	ndev->irq = spi->irq;
 
+	/* issue a global soft reset to reset the device. */
+	ks8851_soft_reset(ks, GRR_GSR);
+
 	/* simple check for a valid chip being connected to the bus */
 
 	if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
diff --git a/drivers/net/ks8851.h b/drivers/net/ks8851.h
index 85abe147afbf..f52c312cc356 100644
--- a/drivers/net/ks8851.h
+++ b/drivers/net/ks8851.h
@@ -16,6 +16,7 @@
 #define CCR_32PIN				(1 << 0)
 
 /* MAC address registers */
+#define KS_MAR(_m)				0x15 - (_m)
 #define KS_MARL					0x10
 #define KS_MARM					0x12
 #define KS_MARH					0x14
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
new file mode 100644
index 000000000000..0be14d702beb
--- /dev/null
+++ b/drivers/net/ks8851_mll.c
@@ -0,0 +1,1697 @@
+/**
+ * drivers/net/ks8851_mll.c
+ * Copyright (c) 2009 Micrel Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/**
+ * Supports:
+ * KS8851 16bit MLL chip from Micrel Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/cache.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#define	DRV_NAME	"ks8851_mll"
+
+static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 };
+#define MAX_RECV_FRAMES			32
+#define MAX_BUF_SIZE			2048
+#define TX_BUF_SIZE			2000
+#define RX_BUF_SIZE			2000
+
+#define KS_CCR				0x08
+#define CCR_EEPROM			(1 << 9)
+#define CCR_SPI				(1 << 8)
+#define CCR_8BIT			(1 << 7)
+#define CCR_16BIT			(1 << 6)
+#define CCR_32BIT			(1 << 5)
+#define CCR_SHARED			(1 << 4)
+#define CCR_32PIN			(1 << 0)
+
+/* MAC address registers */
+#define KS_MARL				0x10
+#define KS_MARM				0x12
+#define KS_MARH				0x14
+
+#define KS_OBCR				0x20
+#define OBCR_ODS_16MA			(1 << 6)
+
+#define KS_EEPCR			0x22
+#define EEPCR_EESA			(1 << 4)
+#define EEPCR_EESB			(1 << 3)
+#define EEPCR_EEDO			(1 << 2)
+#define EEPCR_EESCK			(1 << 1)
+#define EEPCR_EECS			(1 << 0)
+
+#define KS_MBIR				0x24
+#define MBIR_TXMBF			(1 << 12)
+#define MBIR_TXMBFA			(1 << 11)
+#define MBIR_RXMBF			(1 << 4)
+#define MBIR_RXMBFA			(1 << 3)
+
+#define KS_GRR				0x26
+#define GRR_QMU				(1 << 1)
+#define GRR_GSR				(1 << 0)
+
+#define KS_WFCR				0x2A
+#define WFCR_MPRXE			(1 << 7)
+#define WFCR_WF3E			(1 << 3)
+#define WFCR_WF2E			(1 << 2)
+#define WFCR_WF1E			(1 << 1)
+#define WFCR_WF0E			(1 << 0)
+
+#define KS_WF0CRC0			0x30
+#define KS_WF0CRC1			0x32
+#define KS_WF0BM0			0x34
+#define KS_WF0BM1			0x36
+#define KS_WF0BM2			0x38
+#define KS_WF0BM3			0x3A
+
+#define KS_WF1CRC0			0x40
+#define KS_WF1CRC1			0x42
+#define KS_WF1BM0			0x44
+#define KS_WF1BM1			0x46
+#define KS_WF1BM2			0x48
+#define KS_WF1BM3			0x4A
+
+#define KS_WF2CRC0			0x50
+#define KS_WF2CRC1			0x52
+#define KS_WF2BM0			0x54
+#define KS_WF2BM1			0x56
+#define KS_WF2BM2			0x58
+#define KS_WF2BM3			0x5A
+
+#define KS_WF3CRC0			0x60
+#define KS_WF3CRC1			0x62
+#define KS_WF3BM0			0x64
+#define KS_WF3BM1			0x66
+#define KS_WF3BM2			0x68
+#define KS_WF3BM3			0x6A
+
+#define KS_TXCR				0x70
+#define TXCR_TCGICMP			(1 << 8)
+#define TXCR_TCGUDP			(1 << 7)
+#define TXCR_TCGTCP			(1 << 6)
+#define TXCR_TCGIP			(1 << 5)
+#define TXCR_FTXQ			(1 << 4)
+#define TXCR_TXFCE			(1 << 3)
+#define TXCR_TXPE			(1 << 2)
+#define TXCR_TXCRC			(1 << 1)
+#define TXCR_TXE			(1 << 0)
+
+#define KS_TXSR				0x72
+#define TXSR_TXLC			(1 << 13)
+#define TXSR_TXMC			(1 << 12)
+#define TXSR_TXFID_MASK			(0x3f << 0)
+#define TXSR_TXFID_SHIFT		(0)
+#define TXSR_TXFID_GET(_v)		(((_v) >> 0) & 0x3f)
+
+
+#define KS_RXCR1			0x74
+#define RXCR1_FRXQ			(1 << 15)
+#define RXCR1_RXUDPFCC			(1 << 14)
+#define RXCR1_RXTCPFCC			(1 << 13)
+#define RXCR1_RXIPFCC			(1 << 12)
+#define RXCR1_RXPAFMA			(1 << 11)
+#define RXCR1_RXFCE			(1 << 10)
+#define RXCR1_RXEFE			(1 << 9)
+#define RXCR1_RXMAFMA			(1 << 8)
+#define RXCR1_RXBE			(1 << 7)
+#define RXCR1_RXME			(1 << 6)
+#define RXCR1_RXUE			(1 << 5)
+#define RXCR1_RXAE			(1 << 4)
+#define RXCR1_RXINVF			(1 << 1)
+#define RXCR1_RXE			(1 << 0)
+#define RXCR1_FILTER_MASK    		(RXCR1_RXINVF | RXCR1_RXAE | \
+					 RXCR1_RXMAFMA | RXCR1_RXPAFMA)
+
+#define KS_RXCR2			0x76
+#define RXCR2_SRDBL_MASK		(0x7 << 5)
+#define RXCR2_SRDBL_SHIFT		(5)
+#define RXCR2_SRDBL_4B			(0x0 << 5)
+#define RXCR2_SRDBL_8B			(0x1 << 5)
+#define RXCR2_SRDBL_16B			(0x2 << 5)
+#define RXCR2_SRDBL_32B			(0x3 << 5)
+/* #define RXCR2_SRDBL_FRAME		(0x4 << 5) */
+#define RXCR2_IUFFP			(1 << 4)
+#define RXCR2_RXIUFCEZ			(1 << 3)
+#define RXCR2_UDPLFE			(1 << 2)
+#define RXCR2_RXICMPFCC			(1 << 1)
+#define RXCR2_RXSAF			(1 << 0)
+
+#define KS_TXMIR			0x78
+
+#define KS_RXFHSR			0x7C
+#define RXFSHR_RXFV			(1 << 15)
+#define RXFSHR_RXICMPFCS		(1 << 13)
+#define RXFSHR_RXIPFCS			(1 << 12)
+#define RXFSHR_RXTCPFCS			(1 << 11)
+#define RXFSHR_RXUDPFCS			(1 << 10)
+#define RXFSHR_RXBF			(1 << 7)
+#define RXFSHR_RXMF			(1 << 6)
+#define RXFSHR_RXUF			(1 << 5)
+#define RXFSHR_RXMR			(1 << 4)
+#define RXFSHR_RXFT			(1 << 3)
+#define RXFSHR_RXFTL			(1 << 2)
+#define RXFSHR_RXRF			(1 << 1)
+#define RXFSHR_RXCE			(1 << 0)
+#define	RXFSHR_ERR			(RXFSHR_RXCE | RXFSHR_RXRF |\
+					RXFSHR_RXFTL | RXFSHR_RXMR |\
+					RXFSHR_RXICMPFCS | RXFSHR_RXIPFCS |\
+					RXFSHR_RXTCPFCS)
+#define KS_RXFHBCR			0x7E
+#define RXFHBCR_CNT_MASK		0x0FFF
+
+#define KS_TXQCR			0x80
+#define TXQCR_AETFE			(1 << 2)
+#define TXQCR_TXQMAM			(1 << 1)
+#define TXQCR_METFE			(1 << 0)
+
+#define KS_RXQCR			0x82
+#define RXQCR_RXDTTS			(1 << 12)
+#define RXQCR_RXDBCTS			(1 << 11)
+#define RXQCR_RXFCTS			(1 << 10)
+#define RXQCR_RXIPHTOE			(1 << 9)
+#define RXQCR_RXDTTE			(1 << 7)
+#define RXQCR_RXDBCTE			(1 << 6)
+#define RXQCR_RXFCTE			(1 << 5)
+#define RXQCR_ADRFE			(1 << 4)
+#define RXQCR_SDA			(1 << 3)
+#define RXQCR_RRXEF			(1 << 0)
+#define RXQCR_CMD_CNTL                	(RXQCR_RXFCTE|RXQCR_ADRFE)
+
+#define KS_TXFDPR			0x84
+#define TXFDPR_TXFPAI			(1 << 14)
+#define TXFDPR_TXFP_MASK		(0x7ff << 0)
+#define TXFDPR_TXFP_SHIFT		(0)
+
+#define KS_RXFDPR			0x86
+#define RXFDPR_RXFPAI			(1 << 14)
+
+#define KS_RXDTTR			0x8C
+#define KS_RXDBCTR			0x8E
+
+#define KS_IER				0x90
+#define KS_ISR				0x92
+#define IRQ_LCI				(1 << 15)
+#define IRQ_TXI				(1 << 14)
+#define IRQ_RXI				(1 << 13)
+#define IRQ_RXOI			(1 << 11)
+#define IRQ_TXPSI			(1 << 9)
+#define IRQ_RXPSI			(1 << 8)
+#define IRQ_TXSAI			(1 << 6)
+#define IRQ_RXWFDI			(1 << 5)
+#define IRQ_RXMPDI			(1 << 4)
+#define IRQ_LDI				(1 << 3)
+#define IRQ_EDI				(1 << 2)
+#define IRQ_SPIBEI			(1 << 1)
+#define IRQ_DEDI			(1 << 0)
+
+#define KS_RXFCTR			0x9C
+#define RXFCTR_THRESHOLD_MASK     	0x00FF
+
+#define KS_RXFC				0x9D
+#define RXFCTR_RXFC_MASK		(0xff << 8)
+#define RXFCTR_RXFC_SHIFT		(8)
+#define RXFCTR_RXFC_GET(_v)		(((_v) >> 8) & 0xff)
+#define RXFCTR_RXFCT_MASK		(0xff << 0)
+#define RXFCTR_RXFCT_SHIFT		(0)
+
+#define KS_TXNTFSR			0x9E
+
+#define KS_MAHTR0			0xA0
+#define KS_MAHTR1			0xA2
+#define KS_MAHTR2			0xA4
+#define KS_MAHTR3			0xA6
+
+#define KS_FCLWR			0xB0
+#define KS_FCHWR			0xB2
+#define KS_FCOWR			0xB4
+
+#define KS_CIDER			0xC0
+#define CIDER_ID			0x8870
+#define CIDER_REV_MASK			(0x7 << 1)
+#define CIDER_REV_SHIFT			(1)
+#define CIDER_REV_GET(_v)		(((_v) >> 1) & 0x7)
+
+#define KS_CGCR				0xC6
+#define KS_IACR				0xC8
+#define IACR_RDEN			(1 << 12)
+#define IACR_TSEL_MASK			(0x3 << 10)
+#define IACR_TSEL_SHIFT			(10)
+#define IACR_TSEL_MIB			(0x3 << 10)
+#define IACR_ADDR_MASK			(0x1f << 0)
+#define IACR_ADDR_SHIFT			(0)
+
+#define KS_IADLR			0xD0
+#define KS_IAHDR			0xD2
+
+#define KS_PMECR			0xD4
+#define PMECR_PME_DELAY			(1 << 14)
+#define PMECR_PME_POL			(1 << 12)
+#define PMECR_WOL_WAKEUP		(1 << 11)
+#define PMECR_WOL_MAGICPKT		(1 << 10)
+#define PMECR_WOL_LINKUP		(1 << 9)
+#define PMECR_WOL_ENERGY		(1 << 8)
+#define PMECR_AUTO_WAKE_EN		(1 << 7)
+#define PMECR_WAKEUP_NORMAL		(1 << 6)
+#define PMECR_WKEVT_MASK		(0xf << 2)
+#define PMECR_WKEVT_SHIFT		(2)
+#define PMECR_WKEVT_GET(_v)		(((_v) >> 2) & 0xf)
+#define PMECR_WKEVT_ENERGY		(0x1 << 2)
+#define PMECR_WKEVT_LINK		(0x2 << 2)
+#define PMECR_WKEVT_MAGICPKT		(0x4 << 2)
+#define PMECR_WKEVT_FRAME		(0x8 << 2)
+#define PMECR_PM_MASK			(0x3 << 0)
+#define PMECR_PM_SHIFT			(0)
+#define PMECR_PM_NORMAL			(0x0 << 0)
+#define PMECR_PM_ENERGY			(0x1 << 0)
+#define PMECR_PM_SOFTDOWN		(0x2 << 0)
+#define PMECR_PM_POWERSAVE		(0x3 << 0)
+
+/* Standard MII PHY data */
+#define KS_P1MBCR			0xE4
+#define P1MBCR_FORCE_FDX		(1 << 8)
+
+#define KS_P1MBSR			0xE6
+#define P1MBSR_AN_COMPLETE		(1 << 5)
+#define P1MBSR_AN_CAPABLE		(1 << 3)
+#define P1MBSR_LINK_UP			(1 << 2)
+
+#define KS_PHY1ILR			0xE8
+#define KS_PHY1IHR			0xEA
+#define KS_P1ANAR			0xEC
+#define KS_P1ANLPR			0xEE
+
+#define KS_P1SCLMD			0xF4
+#define P1SCLMD_LEDOFF			(1 << 15)
+#define P1SCLMD_TXIDS			(1 << 14)
+#define P1SCLMD_RESTARTAN		(1 << 13)
+#define P1SCLMD_DISAUTOMDIX		(1 << 10)
+#define P1SCLMD_FORCEMDIX		(1 << 9)
+#define P1SCLMD_AUTONEGEN		(1 << 7)
+#define P1SCLMD_FORCE100		(1 << 6)
+#define P1SCLMD_FORCEFDX		(1 << 5)
+#define P1SCLMD_ADV_FLOW		(1 << 4)
+#define P1SCLMD_ADV_100BT_FDX		(1 << 3)
+#define P1SCLMD_ADV_100BT_HDX		(1 << 2)
+#define P1SCLMD_ADV_10BT_FDX		(1 << 1)
+#define P1SCLMD_ADV_10BT_HDX		(1 << 0)
+
+#define KS_P1CR				0xF6
+#define P1CR_HP_MDIX			(1 << 15)
+#define P1CR_REV_POL			(1 << 13)
+#define P1CR_OP_100M			(1 << 10)
+#define P1CR_OP_FDX			(1 << 9)
+#define P1CR_OP_MDI			(1 << 7)
+#define P1CR_AN_DONE			(1 << 6)
+#define P1CR_LINK_GOOD			(1 << 5)
+#define P1CR_PNTR_FLOW			(1 << 4)
+#define P1CR_PNTR_100BT_FDX		(1 << 3)
+#define P1CR_PNTR_100BT_HDX		(1 << 2)
+#define P1CR_PNTR_10BT_FDX		(1 << 1)
+#define P1CR_PNTR_10BT_HDX		(1 << 0)
+
+/* TX Frame control */
+
+#define TXFR_TXIC			(1 << 15)
+#define TXFR_TXFID_MASK			(0x3f << 0)
+#define TXFR_TXFID_SHIFT		(0)
+
+#define KS_P1SR				0xF8
+#define P1SR_HP_MDIX			(1 << 15)
+#define P1SR_REV_POL			(1 << 13)
+#define P1SR_OP_100M			(1 << 10)
+#define P1SR_OP_FDX			(1 << 9)
+#define P1SR_OP_MDI			(1 << 7)
+#define P1SR_AN_DONE			(1 << 6)
+#define P1SR_LINK_GOOD			(1 << 5)
+#define P1SR_PNTR_FLOW			(1 << 4)
+#define P1SR_PNTR_100BT_FDX		(1 << 3)
+#define P1SR_PNTR_100BT_HDX		(1 << 2)
+#define P1SR_PNTR_10BT_FDX		(1 << 1)
+#define P1SR_PNTR_10BT_HDX		(1 << 0)
+
+#define	ENUM_BUS_NONE			0
+#define	ENUM_BUS_8BIT			1
+#define	ENUM_BUS_16BIT			2
+#define	ENUM_BUS_32BIT			3
+
+#define MAX_MCAST_LST			32
+#define HW_MCAST_SIZE			8
+#define MAC_ADDR_LEN			6
+
+/**
+ * union ks_tx_hdr - tx header data
+ * @txb: The header as bytes
+ * @txw: The header as 16bit, little-endian words
+ *
+ * A dual representation of the tx header data to allow
+ * access to individual bytes, and to allow 16bit accesses
+ * with 16bit alignment.
+ */
+union ks_tx_hdr {
+	u8      txb[4];
+	__le16  txw[2];
+};
+
+/**
+ * struct ks_net - KS8851 driver private data
+ * @net_device 	: The network device we're bound to
+ * @hw_addr	: start address of data register.
+ * @hw_addr_cmd	: start address of command register.
+ * @txh    	: temporaly buffer to save status/length.
+ * @lock	: Lock to ensure that the device is not accessed when busy.
+ * @pdev	: Pointer to platform device.
+ * @mii		: The MII state information for the mii calls.
+ * @frame_head_info   	: frame header information for multi-pkt rx.
+ * @statelock	: Lock on this structure for tx list.
+ * @msg_enable	: The message flags controlling driver output (see ethtool).
+ * @frame_cnt  	: number of frames received.
+ * @bus_width  	: i/o bus width.
+ * @irq    	: irq number assigned to this device.
+ * @rc_rxqcr	: Cached copy of KS_RXQCR.
+ * @rc_txcr	: Cached copy of KS_TXCR.
+ * @rc_ier	: Cached copy of KS_IER.
+ * @sharedbus  	: Multipex(addr and data bus) mode indicator.
+ * @cmd_reg_cache	: command register cached.
+ * @cmd_reg_cache_int	: command register cached. Used in the irq handler.
+ * @promiscuous	: promiscuous mode indicator.
+ * @all_mcast  	: mutlicast indicator.
+ * @mcast_lst_size   	: size of multicast list.
+ * @mcast_lst    	: multicast list.
+ * @mcast_bits    	: multicast enabed.
+ * @mac_addr   		: MAC address assigned to this device.
+ * @fid    		: frame id.
+ * @extra_byte    	: number of extra byte prepended rx pkt.
+ * @enabled    		: indicator this device works.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not accessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ *
+ * The @statelock is used to protect information in the structure which may
+ * need to be accessed via several sources, such as the network driver layer
+ * or one of the work queues.
+ *
+ */
+
+/* Receive multiplex framer header info */
+struct type_frame_head {
+	u16	sts;         /* Frame status */
+	u16	len;         /* Byte count */
+};
+
+struct ks_net {
+	struct net_device	*netdev;
+	void __iomem    	*hw_addr;
+	void __iomem    	*hw_addr_cmd;
+	union ks_tx_hdr		txh ____cacheline_aligned;
+	struct mutex      	lock; /* spinlock to be interrupt safe */
+	struct platform_device *pdev;
+	struct mii_if_info	mii;
+	struct type_frame_head	*frame_head_info;
+	spinlock_t		statelock;
+	u32			msg_enable;
+	u32			frame_cnt;
+	int			bus_width;
+	int             	irq;
+
+	u16			rc_rxqcr;
+	u16			rc_txcr;
+	u16			rc_ier;
+	u16			sharedbus;
+	u16			cmd_reg_cache;
+	u16			cmd_reg_cache_int;
+	u16			promiscuous;
+	u16			all_mcast;
+	u16			mcast_lst_size;
+	u8			mcast_lst[MAX_MCAST_LST][MAC_ADDR_LEN];
+	u8			mcast_bits[HW_MCAST_SIZE];
+	u8			mac_addr[6];
+	u8                      fid;
+	u8			extra_byte;
+	u8			enabled;
+};
+
+static int msg_enable;
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->pdev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->pdev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->pdev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->pdev->dev, _msg)
+
+#define BE3             0x8000      /* Byte Enable 3 */
+#define BE2             0x4000      /* Byte Enable 2 */
+#define BE1             0x2000      /* Byte Enable 1 */
+#define BE0             0x1000      /* Byte Enable 0 */
+
+/**
+ * register read/write calls.
+ *
+ * All these calls issue transactions to access the chip's registers. They
+ * all require that the necessary lock is held to prevent accesses when the
+ * chip is busy transfering packet data (RX/TX FIFO accesses).
+ */
+
+/**
+ * ks_rdreg8 - read 8 bit register from device
+ * @ks	  : The chip information
+ * @offset: The register address
+ *
+ * Read a 8bit register from the chip, returning the result
+ */
+static u8 ks_rdreg8(struct ks_net *ks, int offset)
+{
+	u16 data;
+	u8 shift_bit = offset & 0x03;
+	u8 shift_data = (offset & 1) << 3;
+	ks->cmd_reg_cache = (u16) offset | (u16)(BE0 << shift_bit);
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+	data  = ioread16(ks->hw_addr);
+	return (u8)(data >> shift_data);
+}
+
+/**
+ * ks_rdreg16 - read 16 bit register from device
+ * @ks	  : The chip information
+ * @offset: The register address
+ *
+ * Read a 16bit register from the chip, returning the result
+ */
+
+static u16 ks_rdreg16(struct ks_net *ks, int offset)
+{
+	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+	return ioread16(ks->hw_addr);
+}
+
+/**
+ * ks_wrreg8 - write 8bit register value to chip
+ * @ks: The chip information
+ * @offset: The register address
+ * @value: The value to write
+ *
+ */
+static void ks_wrreg8(struct ks_net *ks, int offset, u8 value)
+{
+	u8  shift_bit = (offset & 0x03);
+	u16 value_write = (u16)(value << ((offset & 1) << 3));
+	ks->cmd_reg_cache = (u16)offset | (BE0 << shift_bit);
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+	iowrite16(value_write, ks->hw_addr);
+}
+
+/**
+ * ks_wrreg16 - write 16bit register value to chip
+ * @ks: The chip information
+ * @offset: The register address
+ * @value: The value to write
+ *
+ */
+
+static void ks_wrreg16(struct ks_net *ks, int offset, u16 value)
+{
+	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+	iowrite16(value, ks->hw_addr);
+}
+
+/**
+ * ks_inblk - read a block of data from QMU. This is called after sudo DMA mode enabled.
+ * @ks: The chip state
+ * @wptr: buffer address to save data
+ * @len: length in byte to read
+ *
+ */
+static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len)
+{
+	len >>= 1;
+	while (len--)
+		*wptr++ = (u16)ioread16(ks->hw_addr);
+}
+
+/**
+ * ks_outblk - write data to QMU. This is called after sudo DMA mode enabled.
+ * @ks: The chip information
+ * @wptr: buffer address
+ * @len: length in byte to write
+ *
+ */
+static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
+{
+	len >>= 1;
+	while (len--)
+		iowrite16(*wptr++, ks->hw_addr);
+}
+
+/**
+ * ks_tx_fifo_space - return the available hardware buffer size.
+ * @ks: The chip information
+ *
+ */
+static inline u16 ks_tx_fifo_space(struct ks_net *ks)
+{
+	return ks_rdreg16(ks, KS_TXMIR) & 0x1fff;
+}
+
+/**
+ * ks_save_cmd_reg - save the command register from the cache.
+ * @ks: The chip information
+ *
+ */
+static inline void ks_save_cmd_reg(struct ks_net *ks)
+{
+	/*ks8851 MLL has a bug to read back the command register.
+	* So rely on software to save the content of command register.
+	*/
+	ks->cmd_reg_cache_int = ks->cmd_reg_cache;
+}
+
+/**
+ * ks_restore_cmd_reg - restore the command register from the cache and
+ * 	write to hardware register.
+ * @ks: The chip information
+ *
+ */
+static inline void ks_restore_cmd_reg(struct ks_net *ks)
+{
+	ks->cmd_reg_cache = ks->cmd_reg_cache_int;
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+}
+
+/**
+ * ks_set_powermode - set power mode of the device
+ * @ks: The chip information
+ * @pwrmode: The power mode value to write to KS_PMECR.
+ *
+ * Change the power mode of the chip.
+ */
+static void ks_set_powermode(struct ks_net *ks, unsigned pwrmode)
+{
+	unsigned pmecr;
+
+	if (netif_msg_hw(ks))
+		ks_dbg(ks, "setting power mode %d\n", pwrmode);
+
+	ks_rdreg16(ks, KS_GRR);
+	pmecr = ks_rdreg16(ks, KS_PMECR);
+	pmecr &= ~PMECR_PM_MASK;
+	pmecr |= pwrmode;
+
+	ks_wrreg16(ks, KS_PMECR, pmecr);
+}
+
+/**
+ * ks_read_config - read chip configuration of bus width.
+ * @ks: The chip information
+ *
+ */
+static void ks_read_config(struct ks_net *ks)
+{
+	u16 reg_data = 0;
+
+	/* Regardless of bus width, 8 bit read should always work.*/
+	reg_data = ks_rdreg8(ks, KS_CCR) & 0x00FF;
+	reg_data |= ks_rdreg8(ks, KS_CCR+1) << 8;
+
+	/* addr/data bus are multiplexed */
+	ks->sharedbus = (reg_data & CCR_SHARED) == CCR_SHARED;
+
+	/* There are garbage data when reading data from QMU,
+	depending on bus-width.
+	*/
+
+	if (reg_data & CCR_8BIT) {
+		ks->bus_width = ENUM_BUS_8BIT;
+		ks->extra_byte = 1;
+	} else if (reg_data & CCR_16BIT) {
+		ks->bus_width = ENUM_BUS_16BIT;
+		ks->extra_byte = 2;
+	} else {
+		ks->bus_width = ENUM_BUS_32BIT;
+		ks->extra_byte = 4;
+	}
+}
+
+/**
+ * ks_soft_reset - issue one of the soft reset to the device
+ * @ks: The device state.
+ * @op: The bit(s) to set in the GRR
+ *
+ * Issue the relevant soft-reset command to the device's GRR register
+ * specified by @op.
+ *
+ * Note, the delays are in there as a caution to ensure that the reset
+ * has time to take effect and then complete. Since the datasheet does
+ * not currently specify the exact sequence, we have chosen something
+ * that seems to work with our device.
+ */
+static void ks_soft_reset(struct ks_net *ks, unsigned op)
+{
+	/* Disable interrupt first */
+	ks_wrreg16(ks, KS_IER, 0x0000);
+	ks_wrreg16(ks, KS_GRR, op);
+	mdelay(10);	/* wait a short time to effect reset */
+	ks_wrreg16(ks, KS_GRR, 0);
+	mdelay(1);	/* wait for condition to clear */
+}
+
+
+/**
+ * ks_read_qmu - read 1 pkt data from the QMU.
+ * @ks: The chip information
+ * @buf: buffer address to save 1 pkt
+ * @len: Pkt length
+ * Here is the sequence to read 1 pkt:
+ *	1. set sudo DMA mode
+ *	2. read prepend data
+ *	3. read pkt data
+ *	4. reset sudo DMA Mode
+ */
+static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len)
+{
+	u32 r =  ks->extra_byte & 0x1 ;
+	u32 w = ks->extra_byte - r;
+
+	/* 1. set sudo DMA mode */
+	ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI);
+	ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+
+	/* 2. read prepend data */
+	/**
+	 * read 4 + extra bytes and discard them.
+	 * extra bytes for dummy, 2 for status, 2 for len
+	 */
+
+	/* use likely(r) for 8 bit access for performance */
+	if (unlikely(r))
+		ioread8(ks->hw_addr);
+	ks_inblk(ks, buf, w + 2 + 2);
+
+	/* 3. read pkt data */
+	ks_inblk(ks, buf, ALIGN(len, 4));
+
+	/* 4. reset sudo DMA Mode */
+	ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+}
+
+/**
+ * ks_rcv - read multiple pkts data from the QMU.
+ * @ks: The chip information
+ * @netdev: The network device being opened.
+ *
+ * Read all of header information before reading pkt content.
+ * It is not allowed only port of pkts in QMU after issuing
+ * interrupt ack.
+ */
+static void ks_rcv(struct ks_net *ks, struct net_device *netdev)
+{
+	u32	i;
+	struct type_frame_head *frame_hdr = ks->frame_head_info;
+	struct sk_buff *skb;
+
+	ks->frame_cnt = ks_rdreg16(ks, KS_RXFCTR) >> 8;
+
+	/* read all header information */
+	for (i = 0; i < ks->frame_cnt; i++) {
+		/* Checking Received packet status */
+		frame_hdr->sts = ks_rdreg16(ks, KS_RXFHSR);
+		/* Get packet len from hardware */
+		frame_hdr->len = ks_rdreg16(ks, KS_RXFHBCR);
+		frame_hdr++;
+	}
+
+	frame_hdr = ks->frame_head_info;
+	while (ks->frame_cnt--) {
+		skb = dev_alloc_skb(frame_hdr->len + 16);
+		if (likely(skb && (frame_hdr->sts & RXFSHR_RXFV) &&
+			(frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) {
+			skb_reserve(skb, 2);
+			/* read data block including CRC 4 bytes */
+			ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4);
+			skb_put(skb, frame_hdr->len);
+			skb->dev = netdev;
+			skb->protocol = eth_type_trans(skb, netdev);
+			netif_rx(skb);
+		} else {
+			printk(KERN_ERR "%s: err:skb alloc\n", __func__);
+			ks_wrreg16(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_RRXEF));
+			if (skb)
+				dev_kfree_skb_irq(skb);
+		}
+		frame_hdr++;
+	}
+}
+
+/**
+ * ks_update_link_status - link status update.
+ * @netdev: The network device being opened.
+ * @ks: The chip information
+ *
+ */
+
+static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks)
+{
+	/* check the status of the link */
+	u32 link_up_status;
+	if (ks_rdreg16(ks, KS_P1SR) & P1SR_LINK_GOOD) {
+		netif_carrier_on(netdev);
+		link_up_status = true;
+	} else {
+		netif_carrier_off(netdev);
+		link_up_status = false;
+	}
+	if (netif_msg_link(ks))
+		ks_dbg(ks, "%s: %s\n",
+			__func__, link_up_status ? "UP" : "DOWN");
+}
+
+/**
+ * ks_irq - device interrupt handler
+ * @irq: Interrupt number passed from the IRQ hnalder.
+ * @pw: The private word passed to register_irq(), our struct ks_net.
+ *
+ * This is the handler invoked to find out what happened
+ *
+ * Read the interrupt status, work out what needs to be done and then clear
+ * any of the interrupts that are not needed.
+ */
+
+static irqreturn_t ks_irq(int irq, void *pw)
+{
+	struct ks_net *ks = pw;
+	struct net_device *netdev = ks->netdev;
+	u16 status;
+
+	/*this should be the first in IRQ handler */
+	ks_save_cmd_reg(ks);
+
+	status = ks_rdreg16(ks, KS_ISR);
+	if (unlikely(!status)) {
+		ks_restore_cmd_reg(ks);
+		return IRQ_NONE;
+	}
+
+	ks_wrreg16(ks, KS_ISR, status);
+
+	if (likely(status & IRQ_RXI))
+		ks_rcv(ks, netdev);
+
+	if (unlikely(status & IRQ_LCI))
+		ks_update_link_status(netdev, ks);
+
+	if (unlikely(status & IRQ_TXI))
+		netif_wake_queue(netdev);
+
+	if (unlikely(status & IRQ_LDI)) {
+
+		u16 pmecr = ks_rdreg16(ks, KS_PMECR);
+		pmecr &= ~PMECR_WKEVT_MASK;
+		ks_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK);
+	}
+
+	/* this should be the last in IRQ handler*/
+	ks_restore_cmd_reg(ks);
+	return IRQ_HANDLED;
+}
+
+
+/**
+ * ks_net_open - open network device
+ * @netdev: The network device being opened.
+ *
+ * Called when the network device is marked active, such as a user executing
+ * 'ifconfig up' on the device.
+ */
+static int ks_net_open(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	int err;
+
+#define	KS_INT_FLAGS	(IRQF_DISABLED|IRQF_TRIGGER_LOW)
+	/* lock the card, even if we may not actually do anything
+	 * else at the moment.
+	 */
+
+	if (netif_msg_ifup(ks))
+		ks_dbg(ks, "%s - entry\n", __func__);
+
+	/* reset the HW */
+	err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks);
+
+	if (err) {
+		printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
+			ks->irq, err);
+		return err;
+	}
+
+	if (netif_msg_ifup(ks))
+		ks_dbg(ks, "network device %s up\n", netdev->name);
+
+	return 0;
+}
+
+/**
+ * ks_net_stop - close network device
+ * @netdev: The device being closed.
+ *
+ * Called to close down a network device which has been active. Cancell any
+ * work, shutdown the RX and TX process and then place the chip into a low
+ * power state whilst it is not being used.
+ */
+static int ks_net_stop(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+
+	if (netif_msg_ifdown(ks))
+		ks_info(ks, "%s: shutting down\n", netdev->name);
+
+	netif_stop_queue(netdev);
+
+	kfree(ks->frame_head_info);
+
+	mutex_lock(&ks->lock);
+
+	/* turn off the IRQs and ack any outstanding */
+	ks_wrreg16(ks, KS_IER, 0x0000);
+	ks_wrreg16(ks, KS_ISR, 0xffff);
+
+	/* shutdown RX process */
+	ks_wrreg16(ks, KS_RXCR1, 0x0000);
+
+	/* shutdown TX process */
+	ks_wrreg16(ks, KS_TXCR, 0x0000);
+
+	/* set powermode to soft power down to save power */
+	ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
+	free_irq(ks->irq, netdev);
+	mutex_unlock(&ks->lock);
+	return 0;
+}
+
+
+/**
+ * ks_write_qmu - write 1 pkt data to the QMU.
+ * @ks: The chip information
+ * @pdata: buffer address to save 1 pkt
+ * @len: Pkt length in byte
+ * Here is the sequence to write 1 pkt:
+ *	1. set sudo DMA mode
+ *	2. write status/length
+ *	3. write pkt data
+ *	4. reset sudo DMA Mode
+ *	5. reset sudo DMA mode
+ *	6. Wait until pkt is out
+ */
+static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
+{
+	unsigned fid = ks->fid;
+
+	fid = ks->fid;
+	ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK;
+
+	/* reduce the tx interrupt occurrances. */
+	if (!fid)
+		fid |= TXFR_TXIC;       /* irq on completion */
+
+	/* start header at txb[0] to align txw entries */
+	ks->txh.txw[0] = cpu_to_le16(fid);
+	ks->txh.txw[1] = cpu_to_le16(len);
+
+	/* 1. set sudo-DMA mode */
+	ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+	/* 2. write status/lenth info */
+	ks_outblk(ks, ks->txh.txw, 4);
+	/* 3. write pkt data */
+	ks_outblk(ks, (u16 *)pdata, ALIGN(len, 4));
+	/* 4. reset sudo-DMA mode */
+	ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+	/* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */
+	ks_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
+	/* 6. wait until TXQCR_METFE is auto-cleared */
+	while (ks_rdreg16(ks, KS_TXQCR) & TXQCR_METFE)
+		;
+}
+
+static void ks_disable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, 0x0000);
+}  /* ks_disable_int */
+
+static void ks_enable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, ks->rc_ier);
+}  /* ks_enable_int */
+
+/**
+ * ks_start_xmit - transmit packet
+ * @skb		: The buffer to transmit
+ * @netdev	: The device used to transmit the packet.
+ *
+ * Called by the network layer to transmit the @skb.
+ * spin_lock_irqsave is required because tx and rx should be mutual exclusive.
+ * So while tx is in-progress, prevent IRQ interrupt from happenning.
+ */
+static int ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	int retv = NETDEV_TX_OK;
+	struct ks_net *ks = netdev_priv(netdev);
+
+	disable_irq(netdev->irq);
+	ks_disable_int(ks);
+	spin_lock(&ks->statelock);
+
+	/* Extra space are required:
+	*  4 byte for alignment, 4 for status/length, 4 for CRC
+	*/
+
+	if (likely(ks_tx_fifo_space(ks) >= skb->len + 12)) {
+		ks_write_qmu(ks, skb->data, skb->len);
+		dev_kfree_skb(skb);
+	} else
+		retv = NETDEV_TX_BUSY;
+	spin_unlock(&ks->statelock);
+	ks_enable_int(ks);
+	enable_irq(netdev->irq);
+	return retv;
+}
+
+/**
+ * ks_start_rx - ready to serve pkts
+ * @ks		: The chip information
+ *
+ */
+static void ks_start_rx(struct ks_net *ks)
+{
+	u16 cntl;
+
+	/* Enables QMU Receive (RXCR1). */
+	cntl = ks_rdreg16(ks, KS_RXCR1);
+	cntl |= RXCR1_RXE ;
+	ks_wrreg16(ks, KS_RXCR1, cntl);
+}  /* ks_start_rx */
+
+/**
+ * ks_stop_rx - stop to serve pkts
+ * @ks		: The chip information
+ *
+ */
+static void ks_stop_rx(struct ks_net *ks)
+{
+	u16 cntl;
+
+	/* Disables QMU Receive (RXCR1). */
+	cntl = ks_rdreg16(ks, KS_RXCR1);
+	cntl &= ~RXCR1_RXE ;
+	ks_wrreg16(ks, KS_RXCR1, cntl);
+
+}  /* ks_stop_rx */
+
+static unsigned long const ethernet_polynomial = 0x04c11db7U;
+
+static unsigned long ether_gen_crc(int length, u8 *data)
+{
+	long crc = -1;
+	while (--length >= 0) {
+		u8 current_octet = *data++;
+		int bit;
+
+		for (bit = 0; bit < 8; bit++, current_octet >>= 1) {
+			crc = (crc << 1) ^
+				((crc < 0) ^ (current_octet & 1) ?
+			ethernet_polynomial : 0);
+		}
+	}
+	return (unsigned long)crc;
+}  /* ether_gen_crc */
+
+/**
+* ks_set_grpaddr - set multicast information
+* @ks : The chip information
+*/
+
+static void ks_set_grpaddr(struct ks_net *ks)
+{
+	u8	i;
+	u32	index, position, value;
+
+	memset(ks->mcast_bits, 0, sizeof(u8) * HW_MCAST_SIZE);
+
+	for (i = 0; i < ks->mcast_lst_size; i++) {
+		position = (ether_gen_crc(6, ks->mcast_lst[i]) >> 26) & 0x3f;
+		index = position >> 3;
+		value = 1 << (position & 7);
+		ks->mcast_bits[index] |= (u8)value;
+	}
+
+	for (i  = 0; i < HW_MCAST_SIZE; i++) {
+		if (i & 1) {
+			ks_wrreg16(ks, (u16)((KS_MAHTR0 + i) & ~1),
+				(ks->mcast_bits[i] << 8) |
+				ks->mcast_bits[i - 1]);
+		}
+	}
+}  /* ks_set_grpaddr */
+
+/*
+* ks_clear_mcast - clear multicast information
+*
+* @ks : The chip information
+* This routine removes all mcast addresses set in the hardware.
+*/
+
+static void ks_clear_mcast(struct ks_net *ks)
+{
+	u16	i, mcast_size;
+	for (i = 0; i < HW_MCAST_SIZE; i++)
+		ks->mcast_bits[i] = 0;
+
+	mcast_size = HW_MCAST_SIZE >> 2;
+	for (i = 0; i < mcast_size; i++)
+		ks_wrreg16(ks, KS_MAHTR0 + (2*i), 0);
+}
+
+static void ks_set_promis(struct ks_net *ks, u16 promiscuous_mode)
+{
+	u16		cntl;
+	ks->promiscuous = promiscuous_mode;
+	ks_stop_rx(ks);  /* Stop receiving for reconfiguration */
+	cntl = ks_rdreg16(ks, KS_RXCR1);
+
+	cntl &= ~RXCR1_FILTER_MASK;
+	if (promiscuous_mode)
+		/* Enable Promiscuous mode */
+		cntl |= RXCR1_RXAE | RXCR1_RXINVF;
+	else
+		/* Disable Promiscuous mode (default normal mode) */
+		cntl |= RXCR1_RXPAFMA;
+
+	ks_wrreg16(ks, KS_RXCR1, cntl);
+
+	if (ks->enabled)
+		ks_start_rx(ks);
+
+}  /* ks_set_promis */
+
+static void ks_set_mcast(struct ks_net *ks, u16 mcast)
+{
+	u16	cntl;
+
+	ks->all_mcast = mcast;
+	ks_stop_rx(ks);  /* Stop receiving for reconfiguration */
+	cntl = ks_rdreg16(ks, KS_RXCR1);
+	cntl &= ~RXCR1_FILTER_MASK;
+	if (mcast)
+		/* Enable "Perfect with Multicast address passed mode" */
+		cntl |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA);
+	else
+		/**
+		 * Disable "Perfect with Multicast address passed
+		 * mode" (normal mode).
+		 */
+		cntl |= RXCR1_RXPAFMA;
+
+	ks_wrreg16(ks, KS_RXCR1, cntl);
+
+	if (ks->enabled)
+		ks_start_rx(ks);
+}  /* ks_set_mcast */
+
+static void ks_set_rx_mode(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	struct dev_mc_list *ptr;
+
+	/* Turn on/off promiscuous mode. */
+	if ((netdev->flags & IFF_PROMISC) == IFF_PROMISC)
+		ks_set_promis(ks,
+			(u16)((netdev->flags & IFF_PROMISC) == IFF_PROMISC));
+	/* Turn on/off all mcast mode. */
+	else if ((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI)
+		ks_set_mcast(ks,
+			(u16)((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI));
+	else
+		ks_set_promis(ks, false);
+
+	if ((netdev->flags & IFF_MULTICAST) && netdev->mc_count) {
+		if (netdev->mc_count <= MAX_MCAST_LST) {
+			int i = 0;
+			for (ptr = netdev->mc_list; ptr; ptr = ptr->next) {
+				if (!(*ptr->dmi_addr & 1))
+					continue;
+				if (i >= MAX_MCAST_LST)
+					break;
+				memcpy(ks->mcast_lst[i++], ptr->dmi_addr,
+				MAC_ADDR_LEN);
+			}
+			ks->mcast_lst_size = (u8)i;
+			ks_set_grpaddr(ks);
+		} else {
+			/**
+			 * List too big to support so
+			 * turn on all mcast mode.
+			 */
+			ks->mcast_lst_size = MAX_MCAST_LST;
+			ks_set_mcast(ks, true);
+		}
+	} else {
+		ks->mcast_lst_size = 0;
+		ks_clear_mcast(ks);
+	}
+} /* ks_set_rx_mode */
+
+static void ks_set_mac(struct ks_net *ks, u8 *data)
+{
+	u16 *pw = (u16 *)data;
+	u16 w, u;
+
+	ks_stop_rx(ks);  /* Stop receiving for reconfiguration */
+
+	u = *pw++;
+	w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+	ks_wrreg16(ks, KS_MARH, w);
+
+	u = *pw++;
+	w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+	ks_wrreg16(ks, KS_MARM, w);
+
+	u = *pw;
+	w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+	ks_wrreg16(ks, KS_MARL, w);
+
+	memcpy(ks->mac_addr, data, 6);
+
+	if (ks->enabled)
+		ks_start_rx(ks);
+}
+
+static int ks_set_mac_address(struct net_device *netdev, void *paddr)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	struct sockaddr *addr = paddr;
+	u8 *da;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	da = (u8 *)netdev->dev_addr;
+
+	ks_set_mac(ks, da);
+	return 0;
+}
+
+static int ks_net_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL);
+}
+
+static const struct net_device_ops ks_netdev_ops = {
+	.ndo_open		= ks_net_open,
+	.ndo_stop		= ks_net_stop,
+	.ndo_do_ioctl		= ks_net_ioctl,
+	.ndo_start_xmit		= ks_start_xmit,
+	.ndo_set_mac_address	= ks_set_mac_address,
+	.ndo_set_rx_mode	= ks_set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+/* ethtool support */
+
+static void ks_get_drvinfo(struct net_device *netdev,
+			       struct ethtool_drvinfo *di)
+{
+	strlcpy(di->driver, DRV_NAME, sizeof(di->driver));
+	strlcpy(di->version, "1.00", sizeof(di->version));
+	strlcpy(di->bus_info, dev_name(netdev->dev.parent),
+		sizeof(di->bus_info));
+}
+
+static u32 ks_get_msglevel(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return ks->msg_enable;
+}
+
+static void ks_set_msglevel(struct net_device *netdev, u32 to)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	ks->msg_enable = to;
+}
+
+static int ks_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return mii_ethtool_gset(&ks->mii, cmd);
+}
+
+static int ks_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return mii_ethtool_sset(&ks->mii, cmd);
+}
+
+static u32 ks_get_link(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return mii_link_ok(&ks->mii);
+}
+
+static int ks_nway_reset(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return mii_nway_restart(&ks->mii);
+}
+
+static const struct ethtool_ops ks_ethtool_ops = {
+	.get_drvinfo	= ks_get_drvinfo,
+	.get_msglevel	= ks_get_msglevel,
+	.set_msglevel	= ks_set_msglevel,
+	.get_settings	= ks_get_settings,
+	.set_settings	= ks_set_settings,
+	.get_link	= ks_get_link,
+	.nway_reset	= ks_nway_reset,
+};
+
+/* MII interface controls */
+
+/**
+ * ks_phy_reg - convert MII register into a KS8851 register
+ * @reg: MII register number.
+ *
+ * Return the KS8851 register number for the corresponding MII PHY register
+ * if possible. Return zero if the MII register has no direct mapping to the
+ * KS8851 register set.
+ */
+static int ks_phy_reg(int reg)
+{
+	switch (reg) {
+	case MII_BMCR:
+		return KS_P1MBCR;
+	case MII_BMSR:
+		return KS_P1MBSR;
+	case MII_PHYSID1:
+		return KS_PHY1ILR;
+	case MII_PHYSID2:
+		return KS_PHY1IHR;
+	case MII_ADVERTISE:
+		return KS_P1ANAR;
+	case MII_LPA:
+		return KS_P1ANLPR;
+	}
+
+	return 0x0;
+}
+
+/**
+ * ks_phy_read - MII interface PHY register read.
+ * @netdev: The network device the PHY is on.
+ * @phy_addr: Address of PHY (ignored as we only have one)
+ * @reg: The register to read.
+ *
+ * This call reads data from the PHY register specified in @reg. Since the
+ * device does not support all the MII registers, the non-existant values
+ * are always returned as zero.
+ *
+ * We return zero for unsupported registers as the MII code does not check
+ * the value returned for any error status, and simply returns it to the
+ * caller. The mii-tool that the driver was tested with takes any -ve error
+ * as real PHY capabilities, thus displaying incorrect data to the user.
+ */
+static int ks_phy_read(struct net_device *netdev, int phy_addr, int reg)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	int ksreg;
+	int result;
+
+	ksreg = ks_phy_reg(reg);
+	if (!ksreg)
+		return 0x0;	/* no error return allowed, so use zero */
+
+	mutex_lock(&ks->lock);
+	result = ks_rdreg16(ks, ksreg);
+	mutex_unlock(&ks->lock);
+
+	return result;
+}
+
+static void ks_phy_write(struct net_device *netdev,
+			     int phy, int reg, int value)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	int ksreg;
+
+	ksreg = ks_phy_reg(reg);
+	if (ksreg) {
+		mutex_lock(&ks->lock);
+		ks_wrreg16(ks, ksreg, value);
+		mutex_unlock(&ks->lock);
+	}
+}
+
+/**
+ * ks_read_selftest - read the selftest memory info.
+ * @ks: The device state
+ *
+ * Read and check the TX/RX memory selftest information.
+ */
+static int ks_read_selftest(struct ks_net *ks)
+{
+	unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
+	int ret = 0;
+	unsigned rd;
+
+	rd = ks_rdreg16(ks, KS_MBIR);
+
+	if ((rd & both_done) != both_done) {
+		ks_warn(ks, "Memory selftest not finished\n");
+		return 0;
+	}
+
+	if (rd & MBIR_TXMBFA) {
+		ks_err(ks, "TX memory selftest fails\n");
+		ret |= 1;
+	}
+
+	if (rd & MBIR_RXMBFA) {
+		ks_err(ks, "RX memory selftest fails\n");
+		ret |= 2;
+	}
+
+	ks_info(ks, "the selftest passes\n");
+	return ret;
+}
+
+static void ks_disable(struct ks_net *ks)
+{
+	u16	w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+
+	/* Disables QMU Transmit (TXCR). */
+	w  &= ~TXCR_TXE;
+	ks_wrreg16(ks, KS_TXCR, w);
+
+	/* Disables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	w &= ~RXCR1_RXE ;
+	ks_wrreg16(ks, KS_RXCR1, w);
+
+	ks->enabled = false;
+
+}  /* ks_disable */
+
+static void ks_setup(struct ks_net *ks)
+{
+	u16	w;
+
+	/**
+	 * Configure QMU Transmit
+	 */
+
+	/* Setup Transmit Frame Data Pointer Auto-Increment (TXFDPR) */
+	ks_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI);
+
+	/* Setup Receive Frame Data Pointer Auto-Increment */
+	ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI);
+
+	/* Setup Receive Frame Threshold - 1 frame (RXFCTFC) */
+	ks_wrreg16(ks, KS_RXFCTR, 1 & RXFCTR_THRESHOLD_MASK);
+
+	/* Setup RxQ Command Control (RXQCR) */
+	ks->rc_rxqcr = RXQCR_CMD_CNTL;
+	ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+
+	/**
+	 * set the force mode to half duplex, default is full duplex
+	 *  because if the auto-negotiation fails, most switch uses
+	 *  half-duplex.
+	 */
+
+	w = ks_rdreg16(ks, KS_P1MBCR);
+	w &= ~P1MBCR_FORCE_FDX;
+	ks_wrreg16(ks, KS_P1MBCR, w);
+
+	w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP;
+	ks_wrreg16(ks, KS_TXCR, w);
+
+	w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE;
+
+	if (ks->promiscuous)         /* bPromiscuous */
+		w |= (RXCR1_RXAE | RXCR1_RXINVF);
+	else if (ks->all_mcast) /* Multicast address passed mode */
+		w |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA);
+	else                                   /* Normal mode */
+		w |= RXCR1_RXPAFMA;
+
+	ks_wrreg16(ks, KS_RXCR1, w);
+}  /*ks_setup */
+
+
+static void ks_setup_int(struct ks_net *ks)
+{
+	ks->rc_ier = 0x00;
+	/* Clear the interrupts status of the hardware. */
+	ks_wrreg16(ks, KS_ISR, 0xffff);
+
+	/* Enables the interrupts of the hardware. */
+	ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI);
+}  /* ks_setup_int */
+
+void ks_enable(struct ks_net *ks)
+{
+	u16 w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+	/* Enables QMU Transmit (TXCR). */
+	ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
+
+	/*
+	 * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
+	 * Enable
+	 */
+
+	w = ks_rdreg16(ks, KS_RXQCR);
+	ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
+
+	/* Enables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
+	ks->enabled = true;
+}  /* ks_enable */
+
+static int ks_hw_init(struct ks_net *ks)
+{
+#define	MHEADER_SIZE	(sizeof(struct type_frame_head) * MAX_RECV_FRAMES)
+	ks->promiscuous = 0;
+	ks->all_mcast = 0;
+	ks->mcast_lst_size = 0;
+
+	ks->frame_head_info = (struct type_frame_head *) \
+		kmalloc(MHEADER_SIZE, GFP_KERNEL);
+	if (!ks->frame_head_info) {
+		printk(KERN_ERR "Error: Fail to allocate frame memory\n");
+		return false;
+	}
+
+	ks_set_mac(ks, KS_DEFAULT_MAC_ADDRESS);
+	return true;
+}
+
+
+static int __devinit ks8851_probe(struct platform_device *pdev)
+{
+	int err = -ENOMEM;
+	struct resource *io_d, *io_c;
+	struct net_device *netdev;
+	struct ks_net *ks;
+	u16 id, data;
+
+	io_d = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	io_c = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+	if (!request_mem_region(io_d->start, resource_size(io_d), DRV_NAME))
+		goto err_mem_region;
+
+	if (!request_mem_region(io_c->start, resource_size(io_c), DRV_NAME))
+		goto err_mem_region1;
+
+	netdev = alloc_etherdev(sizeof(struct ks_net));
+	if (!netdev)
+		goto err_alloc_etherdev;
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	ks = netdev_priv(netdev);
+	ks->netdev = netdev;
+	ks->hw_addr = ioremap(io_d->start, resource_size(io_d));
+
+	if (!ks->hw_addr)
+		goto err_ioremap;
+
+	ks->hw_addr_cmd = ioremap(io_c->start, resource_size(io_c));
+	if (!ks->hw_addr_cmd)
+		goto err_ioremap1;
+
+	ks->irq = platform_get_irq(pdev, 0);
+
+	if (ks->irq < 0) {
+		err = ks->irq;
+		goto err_get_irq;
+	}
+
+	ks->pdev = pdev;
+
+	mutex_init(&ks->lock);
+	spin_lock_init(&ks->statelock);
+
+	netdev->netdev_ops = &ks_netdev_ops;
+	netdev->ethtool_ops = &ks_ethtool_ops;
+
+	/* setup mii state */
+	ks->mii.dev             = netdev;
+	ks->mii.phy_id          = 1,
+	ks->mii.phy_id_mask     = 1;
+	ks->mii.reg_num_mask    = 0xf;
+	ks->mii.mdio_read       = ks_phy_read;
+	ks->mii.mdio_write      = ks_phy_write;
+
+	ks_info(ks, "message enable is %d\n", msg_enable);
+	/* set the default message enable */
+	ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV |
+						     NETIF_MSG_PROBE |
+						     NETIF_MSG_LINK));
+	ks_read_config(ks);
+
+	/* simple check for a valid chip being connected to the bus */
+	if ((ks_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+		ks_err(ks, "failed to read device ID\n");
+		err = -ENODEV;
+		goto err_register;
+	}
+
+	if (ks_read_selftest(ks)) {
+		ks_err(ks, "failed to read device ID\n");
+		err = -ENODEV;
+		goto err_register;
+	}
+
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	platform_set_drvdata(pdev, netdev);
+
+	ks_soft_reset(ks, GRR_GSR);
+	ks_hw_init(ks);
+	ks_disable(ks);
+	ks_setup(ks);
+	ks_setup_int(ks);
+	ks_enable_int(ks);
+	ks_enable(ks);
+	memcpy(netdev->dev_addr, ks->mac_addr, 6);
+
+	data = ks_rdreg16(ks, KS_OBCR);
+	ks_wrreg16(ks, KS_OBCR, data | OBCR_ODS_16MA);
+
+	/**
+	 * If you want to use the default MAC addr,
+	 * comment out the 2 functions below.
+	 */
+
+	random_ether_addr(netdev->dev_addr);
+	ks_set_mac(ks, netdev->dev_addr);
+
+	id = ks_rdreg16(ks, KS_CIDER);
+
+	printk(KERN_INFO DRV_NAME
+		" Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
+		(id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7);
+	return 0;
+
+err_register:
+err_get_irq:
+	iounmap(ks->hw_addr_cmd);
+err_ioremap1:
+	iounmap(ks->hw_addr);
+err_ioremap:
+	free_netdev(netdev);
+err_alloc_etherdev:
+	release_mem_region(io_c->start, resource_size(io_c));
+err_mem_region1:
+	release_mem_region(io_d->start, resource_size(io_d));
+err_mem_region:
+	return err;
+}
+
+static int __devexit ks8851_remove(struct platform_device *pdev)
+{
+	struct net_device *netdev = platform_get_drvdata(pdev);
+	struct ks_net *ks = netdev_priv(netdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	unregister_netdev(netdev);
+	iounmap(ks->hw_addr);
+	free_netdev(netdev);
+	release_mem_region(iomem->start, resource_size(iomem));
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+
+}
+
+static struct platform_driver ks8851_platform_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = ks8851_probe,
+	.remove = __devexit_p(ks8851_remove),
+};
+
+static int __init ks8851_init(void)
+{
+	return platform_driver_register(&ks8851_platform_driver);
+}
+
+static void __exit ks8851_exit(void)
+{
+	platform_driver_unregister(&ks8851_platform_driver);
+}
+
+module_init(ks8851_init);
+module_exit(ks8851_exit);
+
+MODULE_DESCRIPTION("KS8851 MLL Network driver");
+MODULE_AUTHOR("David Choi <david.choi@micrel.com>");
+MODULE_LICENSE("GPL");
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
+
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index 92ceb689b4d4..2af81735386b 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -828,7 +828,7 @@ static int __exit meth_remove(struct platform_device *pdev)
 
 static struct platform_driver meth_driver = {
 	.probe	= meth_probe,
-	.remove	= __devexit_p(meth_remove),
+	.remove	= __exit_p(meth_remove),
 	.driver = {
 		.name	= "meth",
 		.owner	= THIS_MODULE,
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 3dd481e77f92..291a505fd4fc 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -1282,6 +1282,8 @@ static struct pci_device_id mlx4_pci_table[] = {
 	{ PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */
 	{ PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
 	{ PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/
+	{ PCI_VDEVICE(MELLANOX, 0x6746) }, /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */
+	{ PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */
 	{ 0, }
 };
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index b5aa974827e5..7fc15e9e8adb 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -595,7 +595,8 @@ netxen_setup_pci_map(struct netxen_adapter *adapter)
 	void __iomem *mem_ptr2 = NULL;
 	void __iomem *db_ptr = NULL;
 
-	unsigned long mem_base, mem_len, db_base, db_len = 0, pci_len0 = 0;
+	resource_size_t mem_base, db_base;
+	unsigned long mem_len, db_len = 0, pci_len0 = 0;
 
 	struct pci_dev *pdev = adapter->pdev;
 	int pci_func = adapter->ahw.pci_func;
@@ -1714,7 +1715,7 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	/* 4 fragments per cmd des */
 	no_of_desc = (frag_count + 3) >> 2;
 
-	if (unlikely(no_of_desc + 2) > netxen_tx_avail(tx_ring)) {
+	if (unlikely(no_of_desc + 2 > netxen_tx_avail(tx_ring))) {
 		netif_stop_queue(netdev);
 		return NETDEV_TX_BUSY;
 	}
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index f9364d0678f2..d6c7ac68f6ea 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -3545,7 +3545,7 @@ static int niu_process_rx_pkt(struct napi_struct *napi, struct niu *np,
 	rp->rcr_index = index;
 
 	skb_reserve(skb, NET_IP_ALIGN);
-	__pskb_pull_tail(skb, min(len, NIU_RXPULL_MAX));
+	__pskb_pull_tail(skb, min(len, VLAN_ETH_HLEN));
 
 	rp->rx_packets++;
 	rp->rx_bytes += skb->len;
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index c594e1946476..57fd483dbb1f 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -111,6 +111,7 @@
 #include <linux/compiler.h>
 #include <linux/prefetch.h>
 #include <linux/ethtool.h>
+#include <linux/sched.h>
 #include <linux/timer.h>
 #include <linux/if_vlan.h>
 #include <linux/rtnetlink.h>
diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/pasemi_mac_ethtool.c
index 064a4fe1dd90..28a86224879d 100644
--- a/drivers/net/pasemi_mac_ethtool.c
+++ b/drivers/net/pasemi_mac_ethtool.c
@@ -71,6 +71,9 @@ pasemi_mac_ethtool_get_settings(struct net_device *netdev,
 	struct pasemi_mac *mac = netdev_priv(netdev);
 	struct phy_device *phydev = mac->phydev;
 
+	if (!phydev)
+		return -EOPNOTSUPP;
+
 	return phy_ethtool_gset(phydev, cmd);
 }
 
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index ee8ad3e180dd..b58965a2b3ae 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -251,6 +251,7 @@ static void el3_tx_timeout(struct net_device *dev);
 static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 static const struct ethtool_ops netdev_ethtool_ops;
 static void set_rx_mode(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
 
 static void tc574_detach(struct pcmcia_device *p_dev);
 
@@ -266,7 +267,7 @@ static const struct net_device_ops el3_netdev_ops = {
 	.ndo_tx_timeout 	= el3_tx_timeout,
 	.ndo_get_stats		= el3_get_stats,
 	.ndo_do_ioctl		= el3_ioctl,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_multicast_list = set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -1161,6 +1162,16 @@ static void set_rx_mode(struct net_device *dev)
 		outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
 }
 
+static void set_multicast_list(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&lp->window_lock, flags);
+	set_rx_mode(dev);
+	spin_unlock_irqrestore(&lp->window_lock, flags);
+}
+
 static int el3_close(struct net_device *dev)
 {
 	unsigned int ioaddr = dev->base_addr;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 474876c879cb..bd3447f04902 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1754,14 +1754,14 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
-	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
-	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"),
+	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
+	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
 	PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
-	PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("PMX   ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
-	PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
 	PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
 	PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
 		0xb4be14e3, 0x43ac239b, 0x0877b627),
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 6d28b18e7e28..c1b3f09f452c 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -31,6 +31,7 @@ static const char *const version =
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 250e10f2c35b..8659d341e769 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -238,6 +238,7 @@ static struct of_device_id mdio_ofgpio_match[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, mdio_ofgpio_match);
 
 static struct of_platform_driver mdio_ofgpio_driver = {
 	.name = "mdio-gpio",
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index cc394d073755..5910df60c93e 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -2179,7 +2179,7 @@ static int pppol2tp_session_setsockopt(struct sock *sk,
  * session or the special tunnel type.
  */
 static int pppol2tp_setsockopt(struct socket *sock, int level, int optname,
-			       char __user *optval, int optlen)
+			       char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct pppol2tp_session *session = sk->sk_user_data;
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index a9845a2f243f..e7285f01bd04 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -9,6 +9,7 @@
 
 #include <linux/pci.h>
 #include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
 
 /*
  * General definitions...
@@ -135,9 +136,9 @@ enum {
 	RST_FO_TFO = (1 << 0),
 	RST_FO_RR_MASK = 0x00060000,
 	RST_FO_RR_CQ_CAM = 0x00000000,
-	RST_FO_RR_DROP = 0x00000001,
-	RST_FO_RR_DQ = 0x00000002,
-	RST_FO_RR_RCV_FUNC_CQ = 0x00000003,
+	RST_FO_RR_DROP = 0x00000002,
+	RST_FO_RR_DQ = 0x00000004,
+	RST_FO_RR_RCV_FUNC_CQ = 0x00000006,
 	RST_FO_FRB = (1 << 12),
 	RST_FO_MOP = (1 << 13),
 	RST_FO_REG = (1 << 14),
@@ -802,6 +803,12 @@ enum {
 	MB_CMD_SET_PORT_CFG = 0x00000122,
 	MB_CMD_GET_PORT_CFG = 0x00000123,
 	MB_CMD_GET_LINK_STS = 0x00000124,
+	MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */
+	MB_SET_MPI_TFK_STOP = (1 << 0),
+	MB_SET_MPI_TFK_RESUME = (1 << 1),
+	MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */
+	MB_GET_MPI_TFK_STOPPED = (1 << 0),
+	MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1),
 
 	/* Mailbox Command Status. */
 	MB_CMD_STS_GOOD = 0x00004000,	/* Success. */
@@ -1167,7 +1174,7 @@ struct ricb {
 #define RSS_RI6 0x40
 #define RSS_RT6 0x80
 	__le16 mask;
-	__le32 hash_cq_id[256];
+	u8 hash_cq_id[1024];
 	__le32 ipv6_hash_key[10];
 	__le32 ipv4_hash_key[4];
 } __attribute((packed));
@@ -1381,15 +1388,15 @@ struct intr_context {
 
 /* adapter flags definitions. */
 enum {
-	QL_ADAPTER_UP = (1 << 0),	/* Adapter has been brought up. */
-	QL_LEGACY_ENABLED = (1 << 3),
-	QL_MSI_ENABLED = (1 << 3),
-	QL_MSIX_ENABLED = (1 << 4),
-	QL_DMA64 = (1 << 5),
-	QL_PROMISCUOUS = (1 << 6),
-	QL_ALLMULTI = (1 << 7),
-	QL_PORT_CFG = (1 << 8),
-	QL_CAM_RT_SET = (1 << 9),
+	QL_ADAPTER_UP = 0,	/* Adapter has been brought up. */
+	QL_LEGACY_ENABLED = 1,
+	QL_MSI_ENABLED = 2,
+	QL_MSIX_ENABLED = 3,
+	QL_DMA64 = 4,
+	QL_PROMISCUOUS = 5,
+	QL_ALLMULTI = 6,
+	QL_PORT_CFG = 7,
+	QL_CAM_RT_SET = 8,
 };
 
 /* link_status bit definitions */
@@ -1477,7 +1484,6 @@ struct ql_adapter {
 	u32 mailbox_in;
 	u32 mailbox_out;
 	struct mbox_params idc_mbc;
-	struct mutex	mpi_mutex;
 
 	int tx_ring_size;
 	int rx_ring_size;
@@ -1606,6 +1612,8 @@ int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
 int ql_mb_about_fw(struct ql_adapter *qdev);
 void ql_link_on(struct ql_adapter *qdev);
 void ql_link_off(struct ql_adapter *qdev);
+int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control);
+int ql_wait_fifo_empty(struct ql_adapter *qdev);
 
 #if 1
 #define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 68f9bd280f86..52073946bce3 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -45,7 +45,6 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 	if (!netif_running(qdev->ndev))
 		return status;
 
-	spin_lock(&qdev->hw_lock);
 	/* Skip the default queue, and update the outbound handler
 	 * queues if they changed.
 	 */
@@ -92,7 +91,6 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 		}
 	}
 exit:
-	spin_unlock(&qdev->hw_lock);
 	return status;
 }
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 7783c5db81dc..48b45df85ec9 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -34,7 +34,6 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/skbuff.h>
-#include <linux/rtnetlink.h>
 #include <linux/if_vlan.h>
 #include <linux/delay.h>
 #include <linux/mm.h>
@@ -321,6 +320,37 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
 
 	switch (type) {
 	case MAC_ADDR_TYPE_MULTI_MAC:
+		{
+			u32 upper = (addr[0] << 8) | addr[1];
+			u32 lower = (addr[2] << 24) | (addr[3] << 16) |
+					(addr[4] << 8) | (addr[5]);
+
+			status =
+				ql_wait_reg_rdy(qdev,
+				MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+			if (status)
+				goto exit;
+			ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
+				(index << MAC_ADDR_IDX_SHIFT) |
+				type | MAC_ADDR_E);
+			ql_write32(qdev, MAC_ADDR_DATA, lower);
+			status =
+				ql_wait_reg_rdy(qdev,
+				MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+			if (status)
+				goto exit;
+			ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
+				(index << MAC_ADDR_IDX_SHIFT) |
+				type | MAC_ADDR_E);
+
+			ql_write32(qdev, MAC_ADDR_DATA, upper);
+			status =
+				ql_wait_reg_rdy(qdev,
+				MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+			if (status)
+				goto exit;
+			break;
+		}
 	case MAC_ADDR_TYPE_CAM_MAC:
 		{
 			u32 cam_output;
@@ -366,16 +396,14 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
 			   and possibly the function id.  Right now we hardcode
 			   the route field to NIC core.
 			 */
-			if (type == MAC_ADDR_TYPE_CAM_MAC) {
-				cam_output = (CAM_OUT_ROUTE_NIC |
-					      (qdev->
-					       func << CAM_OUT_FUNC_SHIFT) |
-						(0 << CAM_OUT_CQ_ID_SHIFT));
-				if (qdev->vlgrp)
-					cam_output |= CAM_OUT_RV;
-				/* route to NIC core */
-				ql_write32(qdev, MAC_ADDR_DATA, cam_output);
-			}
+			cam_output = (CAM_OUT_ROUTE_NIC |
+				      (qdev->
+				       func << CAM_OUT_FUNC_SHIFT) |
+					(0 << CAM_OUT_CQ_ID_SHIFT));
+			if (qdev->vlgrp)
+				cam_output |= CAM_OUT_RV;
+			/* route to NIC core */
+			ql_write32(qdev, MAC_ADDR_DATA, cam_output);
 			break;
 		}
 	case MAC_ADDR_TYPE_VLAN:
@@ -547,14 +575,14 @@ static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask,
 		}
 	case RT_IDX_MCAST:	/* Pass up All Multicast frames. */
 		{
-			value = RT_IDX_DST_CAM_Q |	/* dest */
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
 			    RT_IDX_TYPE_NICQ |	/* type */
 			    (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */
 			break;
 		}
 	case RT_IDX_MCAST_MATCH:	/* Pass up matched Multicast frames. */
 		{
-			value = RT_IDX_DST_CAM_Q |	/* dest */
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
 			    RT_IDX_TYPE_NICQ |	/* type */
 			    (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
 			break;
@@ -1926,12 +1954,10 @@ static void ql_vlan_rx_add_vid(struct net_device *ndev, u16 vid)
 	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
 	if (status)
 		return;
-	spin_lock(&qdev->hw_lock);
 	if (ql_set_mac_addr_reg
 	    (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to init vlan address.\n");
 	}
-	spin_unlock(&qdev->hw_lock);
 	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 }
 
@@ -1945,12 +1971,10 @@ static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid)
 	if (status)
 		return;
 
-	spin_lock(&qdev->hw_lock);
 	if (ql_set_mac_addr_reg
 	    (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to clear vlan address.\n");
 	}
-	spin_unlock(&qdev->hw_lock);
 	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 
 }
@@ -2001,15 +2025,17 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)
 	/*
 	 * Check MPI processor activity.
 	 */
-	if (var & STS_PI) {
+	if ((var & STS_PI) &&
+		(ql_read32(qdev, INTR_MASK) & INTR_MASK_PI)) {
 		/*
 		 * We've got an async event or mailbox completion.
 		 * Handle it and clear the source of the interrupt.
 		 */
 		QPRINTK(qdev, INTR, ERR, "Got MPI processor interrupt.\n");
 		ql_disable_completion_interrupt(qdev, intr_context->intr);
-		queue_delayed_work_on(smp_processor_id(), qdev->workqueue,
-				      &qdev->mpi_work, 0);
+		ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
+		queue_delayed_work_on(smp_processor_id(),
+				qdev->workqueue, &qdev->mpi_work, 0);
 		work_done++;
 	}
 
@@ -3080,6 +3106,12 @@ err_irq:
 
 static int ql_start_rss(struct ql_adapter *qdev)
 {
+	u8 init_hash_seed[] = {0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2,
+				0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f,
+				0xb0, 0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b,
+				0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80,
+				0x30, 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b,
+				0xbe, 0xac, 0x01, 0xfa};
 	struct ricb *ricb = &qdev->ricb;
 	int status = 0;
 	int i;
@@ -3089,21 +3121,17 @@ static int ql_start_rss(struct ql_adapter *qdev)
 
 	ricb->base_cq = RSS_L4K;
 	ricb->flags =
-	    (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 |
-	     RSS_RT6);
-	ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1);
+		(RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RT4 | RSS_RT6);
+	ricb->mask = cpu_to_le16((u16)(0x3ff));
 
 	/*
 	 * Fill out the Indirection Table.
 	 */
-	for (i = 0; i < 256; i++)
-		hash_id[i] = i & (qdev->rss_ring_count - 1);
+	for (i = 0; i < 1024; i++)
+		hash_id[i] = (i & (qdev->rss_ring_count - 1));
 
-	/*
-	 * Random values for the IPv6 and IPv4 Hash Keys.
-	 */
-	get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40);
-	get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16);
+	memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40);
+	memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16);
 
 	QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
 
@@ -3142,14 +3170,14 @@ static int ql_route_initialize(struct ql_adapter *qdev)
 {
 	int status = 0;
 
-	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	/* Clear all the entries in the routing table. */
+	status = ql_clear_routing_entries(qdev);
 	if (status)
 		return status;
 
-	/* Clear all the entries in the routing table. */
-	status = ql_clear_routing_entries(qdev);
+	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
 	if (status)
-		goto exit;
+		return status;
 
 	status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
 	if (status) {
@@ -3242,6 +3270,13 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
 	ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP |
 		min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE));
 
+	/* Set RX packet routing to use port/pci function on which the
+	 * packet arrived on in addition to usual frame routing.
+	 * This is helpful on bonding where both interfaces can have
+	 * the same MAC address.
+	 */
+	ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ);
+
 	/* Start up the rx queues. */
 	for (i = 0; i < qdev->rx_ring_count; i++) {
 		status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]);
@@ -3314,6 +3349,13 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 
 	end_jiffies = jiffies +
 		max((unsigned long)1, usecs_to_jiffies(30));
+
+	/* Stop management traffic. */
+	ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
+
+	/* Wait for the NIC and MGMNT FIFOs to empty. */
+	ql_wait_fifo_empty(qdev);
+
 	ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
 
 	do {
@@ -3329,6 +3371,8 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 		status = -ETIMEDOUT;
 	}
 
+	/* Resume management traffic. */
+	ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_RESUME);
 	return status;
 }
 
@@ -3380,12 +3424,10 @@ static int ql_adapter_down(struct ql_adapter *qdev)
 
 	ql_free_rx_buffers(qdev);
 
-	spin_lock(&qdev->hw_lock);
 	status = ql_adapter_reset(qdev);
 	if (status)
 		QPRINTK(qdev, IFDOWN, ERR, "reset(func #%d) FAILED!\n",
 			qdev->func);
-	spin_unlock(&qdev->hw_lock);
 	return status;
 }
 
@@ -3587,7 +3629,6 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
 	if (status)
 		return;
-	spin_lock(&qdev->hw_lock);
 	/*
 	 * Set or clear promiscuous mode if a
 	 * transition is taking place.
@@ -3664,7 +3705,6 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 		}
 	}
 exit:
-	spin_unlock(&qdev->hw_lock);
 	ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
 }
 
@@ -3684,10 +3724,8 @@ static int qlge_set_mac_address(struct net_device *ndev, void *p)
 	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
 	if (status)
 		return status;
-	spin_lock(&qdev->hw_lock);
 	status = ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr,
 			MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
-	spin_unlock(&qdev->hw_lock);
 	if (status)
 		QPRINTK(qdev, HW, ERR, "Failed to load MAC address.\n");
 	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
@@ -3705,7 +3743,7 @@ static void ql_asic_reset_work(struct work_struct *work)
 	struct ql_adapter *qdev =
 	    container_of(work, struct ql_adapter, asic_reset_work.work);
 	int status;
-
+	rtnl_lock();
 	status = ql_adapter_down(qdev);
 	if (status)
 		goto error;
@@ -3714,11 +3752,17 @@ static void ql_asic_reset_work(struct work_struct *work)
 	if (status)
 		goto error;
 
+	/* Restore rx mode. */
+	clear_bit(QL_ALLMULTI, &qdev->flags);
+	clear_bit(QL_PROMISCUOUS, &qdev->flags);
+	qlge_set_multicast_list(qdev->ndev);
+
+	rtnl_unlock();
 	return;
 error:
 	QPRINTK(qdev, IFUP, ALERT,
 		"Driver up/down cycle failed, closing device\n");
-	rtnl_lock();
+
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
 	dev_close(qdev->ndev);
 	rtnl_unlock();
@@ -3834,11 +3878,14 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 		return err;
 	}
 
+	qdev->ndev = ndev;
+	qdev->pdev = pdev;
+	pci_set_drvdata(pdev, ndev);
 	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (pos <= 0) {
 		dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, "
 			"aborting.\n");
-		goto err_out;
+		return pos;
 	} else {
 		pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16);
 		val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
@@ -3851,7 +3898,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	err = pci_request_regions(pdev, DRV_NAME);
 	if (err) {
 		dev_err(&pdev->dev, "PCI region request failed.\n");
-		goto err_out;
+		return err;
 	}
 
 	pci_set_master(pdev);
@@ -3869,7 +3916,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 		goto err_out;
 	}
 
-	pci_set_drvdata(pdev, ndev);
 	qdev->reg_base =
 	    ioremap_nocache(pci_resource_start(pdev, 1),
 			    pci_resource_len(pdev, 1));
@@ -3889,8 +3935,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 		goto err_out;
 	}
 
-	qdev->ndev = ndev;
-	qdev->pdev = pdev;
 	err = ql_get_board_info(qdev);
 	if (err) {
 		dev_err(&pdev->dev, "Register access failed.\n");
@@ -3930,7 +3974,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work);
 	INIT_DELAYED_WORK(&qdev->mpi_port_cfg_work, ql_mpi_port_cfg_work);
 	INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work);
-	mutex_init(&qdev->mpi_mutex);
 	init_completion(&qdev->ide_completion);
 
 	if (!cards_found) {
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 6685bd97da91..99e58e3f8e22 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -472,7 +472,6 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
 {
 	int status, count;
 
-	mutex_lock(&qdev->mpi_mutex);
 
 	/* Begin polled mode for MPI */
 	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
@@ -541,7 +540,6 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
 		status = -EIO;
 	}
 end:
-	mutex_unlock(&qdev->mpi_mutex);
 	/* End polled mode for MPI */
 	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
 	return status;
@@ -770,13 +768,104 @@ static int ql_idc_wait(struct ql_adapter *qdev)
 	return status;
 }
 
+int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 2;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL;
+	mbcp->mbox_in[1] = control;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Command not supported by firmware.\n");
+		status = -EINVAL;
+	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+		/* This indicates that the firmware is
+		 * already in the state we are trying to
+		 * change it to.
+		 */
+		QPRINTK(qdev, DRV, ERR,
+			"Command parameters make no change.\n");
+	}
+	return status;
+}
+
+/* Returns a negative error code or the mailbox command status. */
+static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+	*control = 0;
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) {
+		*control = mbcp->mbox_in[1];
+		return status;
+	}
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Command not supported by firmware.\n");
+		status = -EINVAL;
+	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to get MPI traffic control.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+int ql_wait_fifo_empty(struct ql_adapter *qdev)
+{
+	int count = 5;
+	u32 mgmnt_fifo_empty;
+	u32 nic_fifo_empty;
+
+	do {
+		nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE;
+		ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty);
+		mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY;
+		if (nic_fifo_empty && mgmnt_fifo_empty)
+			return 0;
+		msleep(100);
+	} while (count-- > 0);
+	return -ETIMEDOUT;
+}
+
 /* API called in work thread context to set new TX/RX
  * maximum frame size values to match MTU.
  */
 static int ql_set_port_cfg(struct ql_adapter *qdev)
 {
 	int status;
+	rtnl_lock();
 	status = ql_mb_set_port_cfg(qdev);
+	rtnl_unlock();
 	if (status)
 		return status;
 	status = ql_idc_wait(qdev);
@@ -797,7 +886,9 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
 	    container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
 	int status;
 
+	rtnl_lock();
 	status = ql_mb_get_port_cfg(qdev);
+	rtnl_unlock();
 	if (status) {
 		QPRINTK(qdev, DRV, ERR,
 			"Bug: Failed to get port config data.\n");
@@ -855,7 +946,9 @@ void ql_mpi_idc_work(struct work_struct *work)
 		 * needs to be set.
 		 * */
 		set_bit(QL_CAM_RT_SET, &qdev->flags);
+		rtnl_lock();
 		status = ql_mb_idc_ack(qdev);
+		rtnl_unlock();
 		if (status) {
 			QPRINTK(qdev, DRV, ERR,
 			"Bug: No pending IDC!\n");
@@ -871,7 +964,9 @@ void ql_mpi_work(struct work_struct *work)
 	struct mbox_params *mbcp = &mbc;
 	int err = 0;
 
-	mutex_lock(&qdev->mpi_mutex);
+	rtnl_lock();
+	/* Begin polled mode for MPI */
+	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
 
 	while (ql_read32(qdev, STS) & STS_PI) {
 		memset(mbcp, 0, sizeof(struct mbox_params));
@@ -884,7 +979,9 @@ void ql_mpi_work(struct work_struct *work)
 			break;
 	}
 
-	mutex_unlock(&qdev->mpi_mutex);
+	/* End polled mode for MPI */
+	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+	rtnl_unlock();
 	ql_enable_completion_interrupt(qdev, 0);
 }
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 50c6a3cfe439..83c47d95c3aa 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -115,7 +115,9 @@ enum mac_version {
 	RTL_GIGA_MAC_VER_22 = 0x16, // 8168C
 	RTL_GIGA_MAC_VER_23 = 0x17, // 8168CP
 	RTL_GIGA_MAC_VER_24 = 0x18, // 8168CP
-	RTL_GIGA_MAC_VER_25 = 0x19  // 8168D
+	RTL_GIGA_MAC_VER_25 = 0x19, // 8168D
+	RTL_GIGA_MAC_VER_26 = 0x1a, // 8168D
+	RTL_GIGA_MAC_VER_27 = 0x1b  // 8168DP
 };
 
 #define _R(NAME,MAC,MASK) \
@@ -150,7 +152,9 @@ static const struct {
 	_R("RTL8168c/8111c",	RTL_GIGA_MAC_VER_22, 0xff7e1880), // PCI-E
 	_R("RTL8168cp/8111cp",	RTL_GIGA_MAC_VER_23, 0xff7e1880), // PCI-E
 	_R("RTL8168cp/8111cp",	RTL_GIGA_MAC_VER_24, 0xff7e1880), // PCI-E
-	_R("RTL8168d/8111d",	RTL_GIGA_MAC_VER_25, 0xff7e1880)  // PCI-E
+	_R("RTL8168d/8111d",	RTL_GIGA_MAC_VER_25, 0xff7e1880), // PCI-E
+	_R("RTL8168d/8111d",	RTL_GIGA_MAC_VER_26, 0xff7e1880), // PCI-E
+	_R("RTL8168dp/8111dp",	RTL_GIGA_MAC_VER_27, 0xff7e1880)  // PCI-E
 };
 #undef _R
 
@@ -253,6 +257,13 @@ enum rtl8168_8101_registers {
 	DBG_REG			= 0xd1,
 #define	FIX_NAK_1			(1 << 4)
 #define	FIX_NAK_2			(1 << 3)
+	EFUSEAR			= 0xdc,
+#define	EFUSEAR_FLAG			0x80000000
+#define	EFUSEAR_WRITE_CMD		0x80000000
+#define	EFUSEAR_READ_CMD		0x00000000
+#define	EFUSEAR_REG_MASK		0x03ff
+#define	EFUSEAR_REG_SHIFT		8
+#define	EFUSEAR_DATA_MASK		0xff
 };
 
 enum rtl_register_content {
@@ -568,6 +579,14 @@ static void mdio_patch(void __iomem *ioaddr, int reg_addr, int value)
 	mdio_write(ioaddr, reg_addr, mdio_read(ioaddr, reg_addr) | value);
 }
 
+static void mdio_plus_minus(void __iomem *ioaddr, int reg_addr, int p, int m)
+{
+	int val;
+
+	val = mdio_read(ioaddr, reg_addr);
+	mdio_write(ioaddr, reg_addr, (val | p) & ~m);
+}
+
 static void rtl_mdio_write(struct net_device *dev, int phy_id, int location,
 			   int val)
 {
@@ -651,6 +670,24 @@ static u32 rtl_csi_read(void __iomem *ioaddr, int addr)
 	return value;
 }
 
+static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr)
+{
+	u8 value = 0xff;
+	unsigned int i;
+
+	RTL_W32(EFUSEAR, (reg_addr & EFUSEAR_REG_MASK) << EFUSEAR_REG_SHIFT);
+
+	for (i = 0; i < 300; i++) {
+		if (RTL_R32(EFUSEAR) & EFUSEAR_FLAG) {
+			value = RTL_R32(EFUSEAR) & EFUSEAR_DATA_MASK;
+			break;
+		}
+		udelay(100);
+	}
+
+	return value;
+}
+
 static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr)
 {
 	RTL_W16(IntrMask, 0x0000);
@@ -1243,7 +1280,10 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 		int mac_version;
 	} mac_info[] = {
 		/* 8168D family. */
-		{ 0x7c800000, 0x28000000,	RTL_GIGA_MAC_VER_25 },
+		{ 0x7cf00000, 0x28300000,	RTL_GIGA_MAC_VER_26 },
+		{ 0x7cf00000, 0x28100000,	RTL_GIGA_MAC_VER_25 },
+		{ 0x7c800000, 0x28800000,	RTL_GIGA_MAC_VER_27 },
+		{ 0x7c800000, 0x28000000,	RTL_GIGA_MAC_VER_26 },
 
 		/* 8168C family. */
 		{ 0x7cf00000, 0x3ca00000,	RTL_GIGA_MAC_VER_24 },
@@ -1648,74 +1688,903 @@ static void rtl8168c_4_hw_phy_config(void __iomem *ioaddr)
 	rtl8168c_3_hw_phy_config(ioaddr);
 }
 
-static void rtl8168d_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init_0[] = {
+	static struct phy_reg phy_reg_init_0[] = {
 		{ 0x1f, 0x0001 },
-		{ 0x09, 0x2770 },
-		{ 0x08, 0x04d0 },
-		{ 0x0b, 0xad15 },
-		{ 0x0c, 0x5bf0 },
-		{ 0x1c, 0xf101 },
+		{ 0x06, 0x4064 },
+		{ 0x07, 0x2863 },
+		{ 0x08, 0x059c },
+		{ 0x09, 0x26b4 },
+		{ 0x0a, 0x6a19 },
+		{ 0x0b, 0xdcc8 },
+		{ 0x10, 0xf06d },
+		{ 0x14, 0x7f68 },
+		{ 0x18, 0x7fd9 },
+		{ 0x1c, 0xf0ff },
+		{ 0x1d, 0x3d9c },
 		{ 0x1f, 0x0003 },
-		{ 0x14, 0x94d7 },
-		{ 0x12, 0xf4d6 },
-		{ 0x09, 0xca0f },
-		{ 0x1f, 0x0002 },
-		{ 0x0b, 0x0b10 },
-		{ 0x0c, 0xd1f7 },
-		{ 0x1f, 0x0002 },
-		{ 0x06, 0x5461 },
+		{ 0x12, 0xf49f },
+		{ 0x13, 0x070b },
+		{ 0x1a, 0x05ad },
+		{ 0x14, 0x94c0 }
+	};
+	static struct phy_reg phy_reg_init_1[] = {
 		{ 0x1f, 0x0002 },
-		{ 0x05, 0x6662 },
+		{ 0x06, 0x5561 },
+		{ 0x1f, 0x0005 },
+		{ 0x05, 0x8332 },
+		{ 0x06, 0x5561 }
+	};
+	static struct phy_reg phy_reg_init_2[] = {
+		{ 0x1f, 0x0005 },
+		{ 0x05, 0xffc2 },
+		{ 0x1f, 0x0005 },
+		{ 0x05, 0x8000 },
+		{ 0x06, 0xf8f9 },
+		{ 0x06, 0xfaef },
+		{ 0x06, 0x59ee },
+		{ 0x06, 0xf8ea },
+		{ 0x06, 0x00ee },
+		{ 0x06, 0xf8eb },
+		{ 0x06, 0x00e0 },
+		{ 0x06, 0xf87c },
+		{ 0x06, 0xe1f8 },
+		{ 0x06, 0x7d59 },
+		{ 0x06, 0x0fef },
+		{ 0x06, 0x0139 },
+		{ 0x06, 0x029e },
+		{ 0x06, 0x06ef },
+		{ 0x06, 0x1039 },
+		{ 0x06, 0x089f },
+		{ 0x06, 0x2aee },
+		{ 0x06, 0xf8ea },
+		{ 0x06, 0x00ee },
+		{ 0x06, 0xf8eb },
+		{ 0x06, 0x01e0 },
+		{ 0x06, 0xf87c },
+		{ 0x06, 0xe1f8 },
+		{ 0x06, 0x7d58 },
+		{ 0x06, 0x409e },
+		{ 0x06, 0x0f39 },
+		{ 0x06, 0x46aa },
+		{ 0x06, 0x0bbf },
+		{ 0x06, 0x8290 },
+		{ 0x06, 0xd682 },
+		{ 0x06, 0x9802 },
+		{ 0x06, 0x014f },
+		{ 0x06, 0xae09 },
+		{ 0x06, 0xbf82 },
+		{ 0x06, 0x98d6 },
+		{ 0x06, 0x82a0 },
+		{ 0x06, 0x0201 },
+		{ 0x06, 0x4fef },
+		{ 0x06, 0x95fe },
+		{ 0x06, 0xfdfc },
+		{ 0x06, 0x05f8 },
+		{ 0x06, 0xf9fa },
+		{ 0x06, 0xeef8 },
+		{ 0x06, 0xea00 },
+		{ 0x06, 0xeef8 },
+		{ 0x06, 0xeb00 },
+		{ 0x06, 0xe2f8 },
+		{ 0x06, 0x7ce3 },
+		{ 0x06, 0xf87d },
+		{ 0x06, 0xa511 },
+		{ 0x06, 0x1112 },
+		{ 0x06, 0xd240 },
+		{ 0x06, 0xd644 },
+		{ 0x06, 0x4402 },
+		{ 0x06, 0x8217 },
+		{ 0x06, 0xd2a0 },
+		{ 0x06, 0xd6aa },
+		{ 0x06, 0xaa02 },
+		{ 0x06, 0x8217 },
+		{ 0x06, 0xae0f },
+		{ 0x06, 0xa544 },
+		{ 0x06, 0x4402 },
+		{ 0x06, 0xae4d },
+		{ 0x06, 0xa5aa },
+		{ 0x06, 0xaa02 },
+		{ 0x06, 0xae47 },
+		{ 0x06, 0xaf82 },
+		{ 0x06, 0x13ee },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x00ee },
+		{ 0x06, 0x834d },
+		{ 0x06, 0x0fee },
+		{ 0x06, 0x834c },
+		{ 0x06, 0x0fee },
+		{ 0x06, 0x834f },
+		{ 0x06, 0x00ee },
+		{ 0x06, 0x8351 },
+		{ 0x06, 0x00ee },
+		{ 0x06, 0x834a },
+		{ 0x06, 0xffee },
+		{ 0x06, 0x834b },
+		{ 0x06, 0xffe0 },
+		{ 0x06, 0x8330 },
+		{ 0x06, 0xe183 },
+		{ 0x06, 0x3158 },
+		{ 0x06, 0xfee4 },
+		{ 0x06, 0xf88a },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0x8be0 },
+		{ 0x06, 0x8332 },
+		{ 0x06, 0xe183 },
+		{ 0x06, 0x3359 },
+		{ 0x06, 0x0fe2 },
+		{ 0x06, 0x834d },
+		{ 0x06, 0x0c24 },
+		{ 0x06, 0x5af0 },
+		{ 0x06, 0x1e12 },
+		{ 0x06, 0xe4f8 },
+		{ 0x06, 0x8ce5 },
+		{ 0x06, 0xf88d },
+		{ 0x06, 0xaf82 },
+		{ 0x06, 0x13e0 },
+		{ 0x06, 0x834f },
+		{ 0x06, 0x10e4 },
+		{ 0x06, 0x834f },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4e78 },
+		{ 0x06, 0x009f },
+		{ 0x06, 0x0ae0 },
+		{ 0x06, 0x834f },
+		{ 0x06, 0xa010 },
+		{ 0x06, 0xa5ee },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x01e0 },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x7805 },
+		{ 0x06, 0x9e9a },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4e78 },
+		{ 0x06, 0x049e },
+		{ 0x06, 0x10e0 },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x7803 },
+		{ 0x06, 0x9e0f },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4e78 },
+		{ 0x06, 0x019e },
+		{ 0x06, 0x05ae },
+		{ 0x06, 0x0caf },
+		{ 0x06, 0x81f8 },
+		{ 0x06, 0xaf81 },
+		{ 0x06, 0xa3af },
+		{ 0x06, 0x81dc },
+		{ 0x06, 0xaf82 },
+		{ 0x06, 0x13ee },
+		{ 0x06, 0x8348 },
+		{ 0x06, 0x00ee },
+		{ 0x06, 0x8349 },
+		{ 0x06, 0x00e0 },
+		{ 0x06, 0x8351 },
+		{ 0x06, 0x10e4 },
+		{ 0x06, 0x8351 },
+		{ 0x06, 0x5801 },
+		{ 0x06, 0x9fea },
+		{ 0x06, 0xd000 },
+		{ 0x06, 0xd180 },
+		{ 0x06, 0x1f66 },
+		{ 0x06, 0xe2f8 },
+		{ 0x06, 0xeae3 },
+		{ 0x06, 0xf8eb },
+		{ 0x06, 0x5af8 },
+		{ 0x06, 0x1e20 },
+		{ 0x06, 0xe6f8 },
+		{ 0x06, 0xeae5 },
+		{ 0x06, 0xf8eb },
+		{ 0x06, 0xd302 },
+		{ 0x06, 0xb3fe },
+		{ 0x06, 0xe2f8 },
+		{ 0x06, 0x7cef },
+		{ 0x06, 0x325b },
+		{ 0x06, 0x80e3 },
+		{ 0x06, 0xf87d },
+		{ 0x06, 0x9e03 },
+		{ 0x06, 0x7dff },
+		{ 0x06, 0xff0d },
+		{ 0x06, 0x581c },
+		{ 0x06, 0x551a },
+		{ 0x06, 0x6511 },
+		{ 0x06, 0xa190 },
+		{ 0x06, 0xd3e2 },
+		{ 0x06, 0x8348 },
+		{ 0x06, 0xe383 },
+		{ 0x06, 0x491b },
+		{ 0x06, 0x56ab },
+		{ 0x06, 0x08ef },
+		{ 0x06, 0x56e6 },
+		{ 0x06, 0x8348 },
+		{ 0x06, 0xe783 },
+		{ 0x06, 0x4910 },
+		{ 0x06, 0xd180 },
+		{ 0x06, 0x1f66 },
+		{ 0x06, 0xa004 },
+		{ 0x06, 0xb9e2 },
+		{ 0x06, 0x8348 },
+		{ 0x06, 0xe383 },
+		{ 0x06, 0x49ef },
+		{ 0x06, 0x65e2 },
+		{ 0x06, 0x834a },
+		{ 0x06, 0xe383 },
+		{ 0x06, 0x4b1b },
+		{ 0x06, 0x56aa },
+		{ 0x06, 0x0eef },
+		{ 0x06, 0x56e6 },
+		{ 0x06, 0x834a },
+		{ 0x06, 0xe783 },
+		{ 0x06, 0x4be2 },
+		{ 0x06, 0x834d },
+		{ 0x06, 0xe683 },
+		{ 0x06, 0x4ce0 },
+		{ 0x06, 0x834d },
+		{ 0x06, 0xa000 },
+		{ 0x06, 0x0caf },
+		{ 0x06, 0x81dc },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4d10 },
+		{ 0x06, 0xe483 },
+		{ 0x06, 0x4dae },
+		{ 0x06, 0x0480 },
+		{ 0x06, 0xe483 },
+		{ 0x06, 0x4de0 },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x7803 },
+		{ 0x06, 0x9e0b },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4e78 },
+		{ 0x06, 0x049e },
+		{ 0x06, 0x04ee },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x02e0 },
+		{ 0x06, 0x8332 },
+		{ 0x06, 0xe183 },
+		{ 0x06, 0x3359 },
+		{ 0x06, 0x0fe2 },
+		{ 0x06, 0x834d },
+		{ 0x06, 0x0c24 },
+		{ 0x06, 0x5af0 },
+		{ 0x06, 0x1e12 },
+		{ 0x06, 0xe4f8 },
+		{ 0x06, 0x8ce5 },
+		{ 0x06, 0xf88d },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x30e1 },
+		{ 0x06, 0x8331 },
+		{ 0x06, 0x6801 },
+		{ 0x06, 0xe4f8 },
+		{ 0x06, 0x8ae5 },
+		{ 0x06, 0xf88b },
+		{ 0x06, 0xae37 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4e03 },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4ce1 },
+		{ 0x06, 0x834d },
+		{ 0x06, 0x1b01 },
+		{ 0x06, 0x9e04 },
+		{ 0x06, 0xaaa1 },
+		{ 0x06, 0xaea8 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4e04 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4f00 },
+		{ 0x06, 0xaeab },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4f78 },
+		{ 0x06, 0x039f },
+		{ 0x06, 0x14ee },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x05d2 },
+		{ 0x06, 0x40d6 },
+		{ 0x06, 0x5554 },
+		{ 0x06, 0x0282 },
+		{ 0x06, 0x17d2 },
+		{ 0x06, 0xa0d6 },
+		{ 0x06, 0xba00 },
+		{ 0x06, 0x0282 },
+		{ 0x06, 0x17fe },
+		{ 0x06, 0xfdfc },
+		{ 0x06, 0x05f8 },
+		{ 0x06, 0xe0f8 },
+		{ 0x06, 0x60e1 },
+		{ 0x06, 0xf861 },
+		{ 0x06, 0x6802 },
+		{ 0x06, 0xe4f8 },
+		{ 0x06, 0x60e5 },
+		{ 0x06, 0xf861 },
+		{ 0x06, 0xe0f8 },
+		{ 0x06, 0x48e1 },
+		{ 0x06, 0xf849 },
+		{ 0x06, 0x580f },
+		{ 0x06, 0x1e02 },
+		{ 0x06, 0xe4f8 },
+		{ 0x06, 0x48e5 },
+		{ 0x06, 0xf849 },
+		{ 0x06, 0xd000 },
+		{ 0x06, 0x0282 },
+		{ 0x06, 0x5bbf },
+		{ 0x06, 0x8350 },
+		{ 0x06, 0xef46 },
+		{ 0x06, 0xdc19 },
+		{ 0x06, 0xddd0 },
+		{ 0x06, 0x0102 },
+		{ 0x06, 0x825b },
+		{ 0x06, 0x0282 },
+		{ 0x06, 0x77e0 },
+		{ 0x06, 0xf860 },
+		{ 0x06, 0xe1f8 },
+		{ 0x06, 0x6158 },
+		{ 0x06, 0xfde4 },
+		{ 0x06, 0xf860 },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0x61fc },
+		{ 0x06, 0x04f9 },
+		{ 0x06, 0xfafb },
+		{ 0x06, 0xc6bf },
+		{ 0x06, 0xf840 },
+		{ 0x06, 0xbe83 },
+		{ 0x06, 0x50a0 },
+		{ 0x06, 0x0101 },
+		{ 0x06, 0x071b },
+		{ 0x06, 0x89cf },
+		{ 0x06, 0xd208 },
+		{ 0x06, 0xebdb },
+		{ 0x06, 0x19b2 },
+		{ 0x06, 0xfbff },
+		{ 0x06, 0xfefd },
+		{ 0x06, 0x04f8 },
+		{ 0x06, 0xe0f8 },
+		{ 0x06, 0x48e1 },
+		{ 0x06, 0xf849 },
+		{ 0x06, 0x6808 },
+		{ 0x06, 0xe4f8 },
+		{ 0x06, 0x48e5 },
+		{ 0x06, 0xf849 },
+		{ 0x06, 0x58f7 },
+		{ 0x06, 0xe4f8 },
+		{ 0x06, 0x48e5 },
+		{ 0x06, 0xf849 },
+		{ 0x06, 0xfc04 },
+		{ 0x06, 0x4d20 },
+		{ 0x06, 0x0002 },
+		{ 0x06, 0x4e22 },
+		{ 0x06, 0x0002 },
+		{ 0x06, 0x4ddf },
+		{ 0x06, 0xff01 },
+		{ 0x06, 0x4edd },
+		{ 0x06, 0xff01 },
+		{ 0x05, 0x83d4 },
+		{ 0x06, 0x8000 },
+		{ 0x05, 0x83d8 },
+		{ 0x06, 0x8051 },
+		{ 0x02, 0x6010 },
+		{ 0x03, 0xdc00 },
+		{ 0x05, 0xfff6 },
+		{ 0x06, 0x00fc },
 		{ 0x1f, 0x0000 },
-		{ 0x14, 0x0060 },
+
 		{ 0x1f, 0x0000 },
-		{ 0x0d, 0xf8a0 },
+		{ 0x0d, 0xf880 },
+		{ 0x1f, 0x0000 }
+	};
+
+	rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
+
+	mdio_write(ioaddr, 0x1f, 0x0002);
+	mdio_plus_minus(ioaddr, 0x0b, 0x0010, 0x00ef);
+	mdio_plus_minus(ioaddr, 0x0c, 0xa200, 0x5d00);
+
+	rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+
+	if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
+		struct phy_reg phy_reg_init[] = {
+			{ 0x1f, 0x0002 },
+			{ 0x05, 0x669a },
+			{ 0x1f, 0x0005 },
+			{ 0x05, 0x8330 },
+			{ 0x06, 0x669a },
+			{ 0x1f, 0x0002 }
+		};
+		int val;
+
+		rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+		val = mdio_read(ioaddr, 0x0d);
+
+		if ((val & 0x00ff) != 0x006c) {
+			u32 set[] = {
+				0x0065, 0x0066, 0x0067, 0x0068,
+				0x0069, 0x006a, 0x006b, 0x006c
+			};
+			int i;
+
+			mdio_write(ioaddr, 0x1f, 0x0002);
+
+			val &= 0xff00;
+			for (i = 0; i < ARRAY_SIZE(set); i++)
+				mdio_write(ioaddr, 0x0d, val | set[i]);
+		}
+	} else {
+		struct phy_reg phy_reg_init[] = {
+			{ 0x1f, 0x0002 },
+			{ 0x05, 0x6662 },
+			{ 0x1f, 0x0005 },
+			{ 0x05, 0x8330 },
+			{ 0x06, 0x6662 }
+		};
+
+		rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	}
+
+	mdio_write(ioaddr, 0x1f, 0x0002);
+	mdio_patch(ioaddr, 0x0d, 0x0300);
+	mdio_patch(ioaddr, 0x0f, 0x0010);
+
+	mdio_write(ioaddr, 0x1f, 0x0002);
+	mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
+	mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
+
+	rtl_phy_write(ioaddr, phy_reg_init_2, ARRAY_SIZE(phy_reg_init_2));
+}
+
+static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr)
+{
+	static struct phy_reg phy_reg_init_0[] = {
+		{ 0x1f, 0x0001 },
+		{ 0x06, 0x4064 },
+		{ 0x07, 0x2863 },
+		{ 0x08, 0x059c },
+		{ 0x09, 0x26b4 },
+		{ 0x0a, 0x6a19 },
+		{ 0x0b, 0xdcc8 },
+		{ 0x10, 0xf06d },
+		{ 0x14, 0x7f68 },
+		{ 0x18, 0x7fd9 },
+		{ 0x1c, 0xf0ff },
+		{ 0x1d, 0x3d9c },
+		{ 0x1f, 0x0003 },
+		{ 0x12, 0xf49f },
+		{ 0x13, 0x070b },
+		{ 0x1a, 0x05ad },
+		{ 0x14, 0x94c0 },
+
+		{ 0x1f, 0x0002 },
+		{ 0x06, 0x5561 },
+		{ 0x1f, 0x0005 },
+		{ 0x05, 0x8332 },
+		{ 0x06, 0x5561 }
+	};
+	static struct phy_reg phy_reg_init_1[] = {
+		{ 0x1f, 0x0005 },
+		{ 0x05, 0xffc2 },
 		{ 0x1f, 0x0005 },
-		{ 0x05, 0xffc2 }
+		{ 0x05, 0x8000 },
+		{ 0x06, 0xf8f9 },
+		{ 0x06, 0xfaee },
+		{ 0x06, 0xf8ea },
+		{ 0x06, 0x00ee },
+		{ 0x06, 0xf8eb },
+		{ 0x06, 0x00e2 },
+		{ 0x06, 0xf87c },
+		{ 0x06, 0xe3f8 },
+		{ 0x06, 0x7da5 },
+		{ 0x06, 0x1111 },
+		{ 0x06, 0x12d2 },
+		{ 0x06, 0x40d6 },
+		{ 0x06, 0x4444 },
+		{ 0x06, 0x0281 },
+		{ 0x06, 0xc6d2 },
+		{ 0x06, 0xa0d6 },
+		{ 0x06, 0xaaaa },
+		{ 0x06, 0x0281 },
+		{ 0x06, 0xc6ae },
+		{ 0x06, 0x0fa5 },
+		{ 0x06, 0x4444 },
+		{ 0x06, 0x02ae },
+		{ 0x06, 0x4da5 },
+		{ 0x06, 0xaaaa },
+		{ 0x06, 0x02ae },
+		{ 0x06, 0x47af },
+		{ 0x06, 0x81c2 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4e00 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4d0f },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4c0f },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4f00 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x5100 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4aff },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4bff },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x30e1 },
+		{ 0x06, 0x8331 },
+		{ 0x06, 0x58fe },
+		{ 0x06, 0xe4f8 },
+		{ 0x06, 0x8ae5 },
+		{ 0x06, 0xf88b },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x32e1 },
+		{ 0x06, 0x8333 },
+		{ 0x06, 0x590f },
+		{ 0x06, 0xe283 },
+		{ 0x06, 0x4d0c },
+		{ 0x06, 0x245a },
+		{ 0x06, 0xf01e },
+		{ 0x06, 0x12e4 },
+		{ 0x06, 0xf88c },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0x8daf },
+		{ 0x06, 0x81c2 },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4f10 },
+		{ 0x06, 0xe483 },
+		{ 0x06, 0x4fe0 },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x7800 },
+		{ 0x06, 0x9f0a },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4fa0 },
+		{ 0x06, 0x10a5 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4e01 },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4e78 },
+		{ 0x06, 0x059e },
+		{ 0x06, 0x9ae0 },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x7804 },
+		{ 0x06, 0x9e10 },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4e78 },
+		{ 0x06, 0x039e },
+		{ 0x06, 0x0fe0 },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x7801 },
+		{ 0x06, 0x9e05 },
+		{ 0x06, 0xae0c },
+		{ 0x06, 0xaf81 },
+		{ 0x06, 0xa7af },
+		{ 0x06, 0x8152 },
+		{ 0x06, 0xaf81 },
+		{ 0x06, 0x8baf },
+		{ 0x06, 0x81c2 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4800 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4900 },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x5110 },
+		{ 0x06, 0xe483 },
+		{ 0x06, 0x5158 },
+		{ 0x06, 0x019f },
+		{ 0x06, 0xead0 },
+		{ 0x06, 0x00d1 },
+		{ 0x06, 0x801f },
+		{ 0x06, 0x66e2 },
+		{ 0x06, 0xf8ea },
+		{ 0x06, 0xe3f8 },
+		{ 0x06, 0xeb5a },
+		{ 0x06, 0xf81e },
+		{ 0x06, 0x20e6 },
+		{ 0x06, 0xf8ea },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0xebd3 },
+		{ 0x06, 0x02b3 },
+		{ 0x06, 0xfee2 },
+		{ 0x06, 0xf87c },
+		{ 0x06, 0xef32 },
+		{ 0x06, 0x5b80 },
+		{ 0x06, 0xe3f8 },
+		{ 0x06, 0x7d9e },
+		{ 0x06, 0x037d },
+		{ 0x06, 0xffff },
+		{ 0x06, 0x0d58 },
+		{ 0x06, 0x1c55 },
+		{ 0x06, 0x1a65 },
+		{ 0x06, 0x11a1 },
+		{ 0x06, 0x90d3 },
+		{ 0x06, 0xe283 },
+		{ 0x06, 0x48e3 },
+		{ 0x06, 0x8349 },
+		{ 0x06, 0x1b56 },
+		{ 0x06, 0xab08 },
+		{ 0x06, 0xef56 },
+		{ 0x06, 0xe683 },
+		{ 0x06, 0x48e7 },
+		{ 0x06, 0x8349 },
+		{ 0x06, 0x10d1 },
+		{ 0x06, 0x801f },
+		{ 0x06, 0x66a0 },
+		{ 0x06, 0x04b9 },
+		{ 0x06, 0xe283 },
+		{ 0x06, 0x48e3 },
+		{ 0x06, 0x8349 },
+		{ 0x06, 0xef65 },
+		{ 0x06, 0xe283 },
+		{ 0x06, 0x4ae3 },
+		{ 0x06, 0x834b },
+		{ 0x06, 0x1b56 },
+		{ 0x06, 0xaa0e },
+		{ 0x06, 0xef56 },
+		{ 0x06, 0xe683 },
+		{ 0x06, 0x4ae7 },
+		{ 0x06, 0x834b },
+		{ 0x06, 0xe283 },
+		{ 0x06, 0x4de6 },
+		{ 0x06, 0x834c },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4da0 },
+		{ 0x06, 0x000c },
+		{ 0x06, 0xaf81 },
+		{ 0x06, 0x8be0 },
+		{ 0x06, 0x834d },
+		{ 0x06, 0x10e4 },
+		{ 0x06, 0x834d },
+		{ 0x06, 0xae04 },
+		{ 0x06, 0x80e4 },
+		{ 0x06, 0x834d },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x4e78 },
+		{ 0x06, 0x039e },
+		{ 0x06, 0x0be0 },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x7804 },
+		{ 0x06, 0x9e04 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4e02 },
+		{ 0x06, 0xe083 },
+		{ 0x06, 0x32e1 },
+		{ 0x06, 0x8333 },
+		{ 0x06, 0x590f },
+		{ 0x06, 0xe283 },
+		{ 0x06, 0x4d0c },
+		{ 0x06, 0x245a },
+		{ 0x06, 0xf01e },
+		{ 0x06, 0x12e4 },
+		{ 0x06, 0xf88c },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0x8de0 },
+		{ 0x06, 0x8330 },
+		{ 0x06, 0xe183 },
+		{ 0x06, 0x3168 },
+		{ 0x06, 0x01e4 },
+		{ 0x06, 0xf88a },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0x8bae },
+		{ 0x06, 0x37ee },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x03e0 },
+		{ 0x06, 0x834c },
+		{ 0x06, 0xe183 },
+		{ 0x06, 0x4d1b },
+		{ 0x06, 0x019e },
+		{ 0x06, 0x04aa },
+		{ 0x06, 0xa1ae },
+		{ 0x06, 0xa8ee },
+		{ 0x06, 0x834e },
+		{ 0x06, 0x04ee },
+		{ 0x06, 0x834f },
+		{ 0x06, 0x00ae },
+		{ 0x06, 0xabe0 },
+		{ 0x06, 0x834f },
+		{ 0x06, 0x7803 },
+		{ 0x06, 0x9f14 },
+		{ 0x06, 0xee83 },
+		{ 0x06, 0x4e05 },
+		{ 0x06, 0xd240 },
+		{ 0x06, 0xd655 },
+		{ 0x06, 0x5402 },
+		{ 0x06, 0x81c6 },
+		{ 0x06, 0xd2a0 },
+		{ 0x06, 0xd6ba },
+		{ 0x06, 0x0002 },
+		{ 0x06, 0x81c6 },
+		{ 0x06, 0xfefd },
+		{ 0x06, 0xfc05 },
+		{ 0x06, 0xf8e0 },
+		{ 0x06, 0xf860 },
+		{ 0x06, 0xe1f8 },
+		{ 0x06, 0x6168 },
+		{ 0x06, 0x02e4 },
+		{ 0x06, 0xf860 },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0x61e0 },
+		{ 0x06, 0xf848 },
+		{ 0x06, 0xe1f8 },
+		{ 0x06, 0x4958 },
+		{ 0x06, 0x0f1e },
+		{ 0x06, 0x02e4 },
+		{ 0x06, 0xf848 },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0x49d0 },
+		{ 0x06, 0x0002 },
+		{ 0x06, 0x820a },
+		{ 0x06, 0xbf83 },
+		{ 0x06, 0x50ef },
+		{ 0x06, 0x46dc },
+		{ 0x06, 0x19dd },
+		{ 0x06, 0xd001 },
+		{ 0x06, 0x0282 },
+		{ 0x06, 0x0a02 },
+		{ 0x06, 0x8226 },
+		{ 0x06, 0xe0f8 },
+		{ 0x06, 0x60e1 },
+		{ 0x06, 0xf861 },
+		{ 0x06, 0x58fd },
+		{ 0x06, 0xe4f8 },
+		{ 0x06, 0x60e5 },
+		{ 0x06, 0xf861 },
+		{ 0x06, 0xfc04 },
+		{ 0x06, 0xf9fa },
+		{ 0x06, 0xfbc6 },
+		{ 0x06, 0xbff8 },
+		{ 0x06, 0x40be },
+		{ 0x06, 0x8350 },
+		{ 0x06, 0xa001 },
+		{ 0x06, 0x0107 },
+		{ 0x06, 0x1b89 },
+		{ 0x06, 0xcfd2 },
+		{ 0x06, 0x08eb },
+		{ 0x06, 0xdb19 },
+		{ 0x06, 0xb2fb },
+		{ 0x06, 0xfffe },
+		{ 0x06, 0xfd04 },
+		{ 0x06, 0xf8e0 },
+		{ 0x06, 0xf848 },
+		{ 0x06, 0xe1f8 },
+		{ 0x06, 0x4968 },
+		{ 0x06, 0x08e4 },
+		{ 0x06, 0xf848 },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0x4958 },
+		{ 0x06, 0xf7e4 },
+		{ 0x06, 0xf848 },
+		{ 0x06, 0xe5f8 },
+		{ 0x06, 0x49fc },
+		{ 0x06, 0x044d },
+		{ 0x06, 0x2000 },
+		{ 0x06, 0x024e },
+		{ 0x06, 0x2200 },
+		{ 0x06, 0x024d },
+		{ 0x06, 0xdfff },
+		{ 0x06, 0x014e },
+		{ 0x06, 0xddff },
+		{ 0x06, 0x0100 },
+		{ 0x05, 0x83d8 },
+		{ 0x06, 0x8000 },
+		{ 0x03, 0xdc00 },
+		{ 0x05, 0xfff6 },
+		{ 0x06, 0x00fc },
+		{ 0x1f, 0x0000 },
+
+		{ 0x1f, 0x0000 },
+		{ 0x0d, 0xf880 },
+		{ 0x1f, 0x0000 }
 	};
 
 	rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
 
-	if (mdio_read(ioaddr, 0x06) == 0xc400) {
-		struct phy_reg phy_reg_init_1[] = {
+	if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
+		struct phy_reg phy_reg_init[] = {
+			{ 0x1f, 0x0002 },
+			{ 0x05, 0x669a },
 			{ 0x1f, 0x0005 },
-			{ 0x01, 0x0300 },
-			{ 0x1f, 0x0000 },
-			{ 0x11, 0x401c },
-			{ 0x16, 0x4100 },
+			{ 0x05, 0x8330 },
+			{ 0x06, 0x669a },
+
+			{ 0x1f, 0x0002 }
+		};
+		int val;
+
+		rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+		val = mdio_read(ioaddr, 0x0d);
+		if ((val & 0x00ff) != 0x006c) {
+			u32 set[] = {
+				0x0065, 0x0066, 0x0067, 0x0068,
+				0x0069, 0x006a, 0x006b, 0x006c
+			};
+			int i;
+
+			mdio_write(ioaddr, 0x1f, 0x0002);
+
+			val &= 0xff00;
+			for (i = 0; i < ARRAY_SIZE(set); i++)
+				mdio_write(ioaddr, 0x0d, val | set[i]);
+		}
+	} else {
+		struct phy_reg phy_reg_init[] = {
+			{ 0x1f, 0x0002 },
+			{ 0x05, 0x2642 },
 			{ 0x1f, 0x0005 },
-			{ 0x07, 0x0010 },
-			{ 0x05, 0x83dc },
-			{ 0x06, 0x087d },
-			{ 0x05, 0x8300 },
-			{ 0x06, 0x0101 },
-			{ 0x06, 0x05f8 },
-			{ 0x06, 0xf9fa },
-			{ 0x06, 0xfbef },
-			{ 0x06, 0x79e2 },
-			{ 0x06, 0x835f },
-			{ 0x06, 0xe0f8 },
-			{ 0x06, 0x9ae1 },
-			{ 0x06, 0xf89b },
-			{ 0x06, 0xef31 },
-			{ 0x06, 0x3b65 },
-			{ 0x06, 0xaa07 },
-			{ 0x06, 0x81e4 },
-			{ 0x06, 0xf89a },
-			{ 0x06, 0xe5f8 },
-			{ 0x06, 0x9baf },
-			{ 0x06, 0x06ae },
-			{ 0x05, 0x83dc },
-			{ 0x06, 0x8300 },
+			{ 0x05, 0x8330 },
+			{ 0x06, 0x2642 }
 		};
 
-		rtl_phy_write(ioaddr, phy_reg_init_1,
-			      ARRAY_SIZE(phy_reg_init_1));
+		rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 	}
 
-	mdio_write(ioaddr, 0x1f, 0x0000);
+	mdio_write(ioaddr, 0x1f, 0x0002);
+	mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
+	mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
+
+	mdio_write(ioaddr, 0x1f, 0x0001);
+	mdio_write(ioaddr, 0x17, 0x0cc0);
+
+	mdio_write(ioaddr, 0x1f, 0x0002);
+	mdio_patch(ioaddr, 0x0f, 0x0017);
+
+	rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+}
+
+static void rtl8168d_3_hw_phy_config(void __iomem *ioaddr)
+{
+	struct phy_reg phy_reg_init[] = {
+		{ 0x1f, 0x0002 },
+		{ 0x10, 0x0008 },
+		{ 0x0d, 0x006c },
+
+		{ 0x1f, 0x0000 },
+		{ 0x0d, 0xf880 },
+
+		{ 0x1f, 0x0001 },
+		{ 0x17, 0x0cc0 },
+
+		{ 0x1f, 0x0001 },
+		{ 0x0b, 0xa4d8 },
+		{ 0x09, 0x281c },
+		{ 0x07, 0x2883 },
+		{ 0x0a, 0x6b35 },
+		{ 0x1d, 0x3da4 },
+		{ 0x1c, 0xeffd },
+		{ 0x14, 0x7f52 },
+		{ 0x18, 0x7fc6 },
+		{ 0x08, 0x0601 },
+		{ 0x06, 0x4063 },
+		{ 0x10, 0xf074 },
+		{ 0x1f, 0x0003 },
+		{ 0x13, 0x0789 },
+		{ 0x12, 0xf4bd },
+		{ 0x1a, 0x04fd },
+		{ 0x14, 0x84b0 },
+		{ 0x1f, 0x0000 },
+		{ 0x00, 0x9200 },
+
+		{ 0x1f, 0x0005 },
+		{ 0x01, 0x0340 },
+		{ 0x1f, 0x0001 },
+		{ 0x04, 0x4000 },
+		{ 0x03, 0x1d21 },
+		{ 0x02, 0x0c32 },
+		{ 0x01, 0x0200 },
+		{ 0x00, 0x5554 },
+		{ 0x04, 0x4800 },
+		{ 0x04, 0x4000 },
+		{ 0x04, 0xf000 },
+		{ 0x03, 0xdf01 },
+		{ 0x02, 0xdf20 },
+		{ 0x01, 0x101a },
+		{ 0x00, 0xa0ff },
+		{ 0x04, 0xf800 },
+		{ 0x04, 0xf000 },
+		{ 0x1f, 0x0000 },
+
+		{ 0x1f, 0x0007 },
+		{ 0x1e, 0x0023 },
+		{ 0x16, 0x0000 },
+		{ 0x1f, 0x0000 }
+	};
+
+	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
 static void rtl8102e_hw_phy_config(void __iomem *ioaddr)
@@ -1792,7 +2661,13 @@ static void rtl_hw_phy_config(struct net_device *dev)
 		rtl8168cp_2_hw_phy_config(ioaddr);
 		break;
 	case RTL_GIGA_MAC_VER_25:
-		rtl8168d_hw_phy_config(ioaddr);
+		rtl8168d_1_hw_phy_config(ioaddr);
+		break;
+	case RTL_GIGA_MAC_VER_26:
+		rtl8168d_2_hw_phy_config(ioaddr);
+		break;
+	case RTL_GIGA_MAC_VER_27:
+		rtl8168d_3_hw_phy_config(ioaddr);
 		break;
 
 	default:
@@ -2863,6 +3738,8 @@ static void rtl_hw_start_8168(struct net_device *dev)
 	break;
 
 	case RTL_GIGA_MAC_VER_25:
+	case RTL_GIGA_MAC_VER_26:
+	case RTL_GIGA_MAC_VER_27:
 		rtl_hw_start_8168d(ioaddr, pdev);
 	break;
 
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index ee366c5a8fa3..c9c70ab0cce0 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -36,6 +36,7 @@ static char version[] = "sb1000.c:v1.1.2 6/01/98 (fventuri@mediaone.net)\n";
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index ecf3279fbef5..f4dfd1f679a9 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -826,7 +826,7 @@ static int __exit sgiseeq_remove(struct platform_device *pdev)
 
 static struct platform_driver sgiseeq_driver = {
 	.probe	= sgiseeq_probe,
-	.remove	= __devexit_p(sgiseeq_remove),
+	.remove	= __exit_p(sgiseeq_remove),
 	.driver = {
 		.name	= "sgiseeq",
 		.owner	= THIS_MODULE,
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 97949d0a699b..c072f7f36acf 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -52,6 +52,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/timer.h>
 #include <linux/errno.h>
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index 38a508b4aad9..b27156eaf267 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -73,6 +73,7 @@ static const char * const boot_msg =
 
 /* Include files */
 
+#include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 55bad4081966..8f5414348e86 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -37,6 +37,7 @@
 #include <linux/crc32.h>
 #include <linux/dma-mapping.h>
 #include <linux/debugfs.h>
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/mii.h>
 #include <asm/irq.h>
@@ -3935,11 +3936,14 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 #endif
 
 	err = -ENOMEM;
-	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+	/* space for skge@pci:0000:04:00.0 */
+	hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:" )
+		     + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
 	if (!hw) {
 		dev_err(&pdev->dev, "cannot allocate hardware struct\n");
 		goto err_out_free_regions;
 	}
+	sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
 
 	hw->pdev = pdev;
 	spin_lock_init(&hw->hw_lock);
@@ -3974,7 +3978,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 		goto err_out_free_netdev;
 	}
 
-	err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw);
+	err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, hw->irq_name, hw);
 	if (err) {
 		dev_err(&pdev->dev, "%s: cannot assign irq %d\n",
 		       dev->name, pdev->irq);
@@ -3982,14 +3986,17 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 	}
 	skge_show_addr(dev);
 
-	if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) {
-		if (register_netdev(dev1) == 0)
+	if (hw->ports > 1) {
+		dev1 = skge_devinit(hw, 1, using_dac);
+		if (dev1 && register_netdev(dev1) == 0)
 			skge_show_addr(dev1);
 		else {
 			/* Failure to register second port need not be fatal */
 			dev_warn(&pdev->dev, "register of second port failed\n");
 			hw->dev[1] = NULL;
-			free_netdev(dev1);
+			hw->ports = 1;
+			if (dev1)
+				free_netdev(dev1);
 		}
 	}
 	pci_set_drvdata(pdev, hw);
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 17caccbb7685..831de1b6e96e 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -2423,6 +2423,8 @@ struct skge_hw {
 	u16		     phy_addr;
 	spinlock_t	     phy_lock;
 	struct tasklet_struct phy_task;
+
+	char		     irq_name[0]; /* skge@pci:000:04:00.0 */
 };
 
 enum pause_control {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index ef1165718dd7..2ab5c39f33ca 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4487,13 +4487,16 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0;
 
 	err = -ENOMEM;
-	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+
+	hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
+		     + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
 	if (!hw) {
 		dev_err(&pdev->dev, "cannot allocate hardware struct\n");
 		goto err_out_free_regions;
 	}
 
 	hw->pdev = pdev;
+	sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
 
 	hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
 	if (!hw->regs) {
@@ -4539,7 +4542,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 
 	err = request_irq(pdev->irq, sky2_intr,
 			  (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
-			  dev->name, hw);
+			  hw->irq_name, hw);
 	if (err) {
 		dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
 		goto err_out_unregister;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index e0f23a101043..ed54129698b4 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2085,6 +2085,8 @@ struct sky2_hw {
 	struct timer_list    watchdog_timer;
 	struct work_struct   restart_work;
 	wait_queue_head_t    msi_wait;
+
+	char		     irq_name[0];
 };
 
 static inline int sky2_is_copper(const struct sky2_hw *hw)
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index e17c535a577e..fe3cebb984de 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -67,6 +67,7 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/bitops.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/stmmac/Kconfig
new file mode 100644
index 000000000000..35eaa5251d7f
--- /dev/null
+++ b/drivers/net/stmmac/Kconfig
@@ -0,0 +1,53 @@
+config STMMAC_ETH
+	tristate "STMicroelectronics 10/100/1000 Ethernet driver"
+	select MII
+	select PHYLIB
+	depends on NETDEVICES && CPU_SUBTYPE_ST40
+	help
+	  This is the driver for the ST MAC 10/100/1000 on-chip Ethernet
+	  controllers. ST Ethernet IPs are built around a Synopsys IP Core.
+
+if STMMAC_ETH
+
+config STMMAC_DA
+	bool "STMMAC DMA arbitration scheme"
+	default n
+	help
+	  Selecting this option, rx has priority over Tx (only for Giga
+	  Ethernet device).
+	  By default, the DMA arbitration scheme is based on Round-robin
+	  (rx:tx priority is 1:1).
+
+config STMMAC_DUAL_MAC
+	bool "STMMAC: dual mac support (EXPERIMENTAL)"
+	default n
+        depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
+	help
+	  Some ST SoCs (for example the stx7141 and stx7200c2) have two
+	  Ethernet Controllers. This option turns on the second Ethernet
+	  device on this kind of platforms.
+
+config STMMAC_TIMER
+	bool "STMMAC Timer optimisation"
+	default n
+	help
+	  Use an external timer for mitigating the number of network
+	  interrupts.
+
+choice
+        prompt "Select Timer device"
+        depends on STMMAC_TIMER
+
+config STMMAC_TMU_TIMER
+        bool "TMU channel 2"
+        depends on CPU_SH4
+	help
+
+config STMMAC_RTC_TIMER
+        bool "Real time clock"
+        depends on RTC_CLASS
+	help
+
+endchoice
+
+endif
diff --git a/drivers/net/stmmac/Makefile b/drivers/net/stmmac/Makefile
new file mode 100644
index 000000000000..b2d7a5564dfa
--- /dev/null
+++ b/drivers/net/stmmac/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_STMMAC_ETH) += stmmac.o
+stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
+stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \
+		mac100.o  gmac.o $(stmmac-y)
diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
new file mode 100644
index 000000000000..e49e5188e887
--- /dev/null
+++ b/drivers/net/stmmac/common.h
@@ -0,0 +1,330 @@
+/*******************************************************************************
+  STMMAC Common Header File
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include "descs.h"
+#include <linux/io.h>
+
+/* *********************************************
+   DMA CRS Control and Status Register Mapping
+ * *********************************************/
+#define DMA_BUS_MODE		0x00001000	/* Bus Mode */
+#define DMA_XMT_POLL_DEMAND	0x00001004	/* Transmit Poll Demand */
+#define DMA_RCV_POLL_DEMAND	0x00001008	/* Received Poll Demand */
+#define DMA_RCV_BASE_ADDR	0x0000100c	/* Receive List Base */
+#define DMA_TX_BASE_ADDR	0x00001010	/* Transmit List Base */
+#define DMA_STATUS		0x00001014	/* Status Register */
+#define DMA_CONTROL		0x00001018	/* Ctrl (Operational Mode) */
+#define DMA_INTR_ENA		0x0000101c	/* Interrupt Enable */
+#define DMA_MISSED_FRAME_CTR	0x00001020	/* Missed Frame Counter */
+#define DMA_CUR_TX_BUF_ADDR	0x00001050	/* Current Host Tx Buffer */
+#define DMA_CUR_RX_BUF_ADDR	0x00001054	/* Current Host Rx Buffer */
+
+/* ********************************
+   DMA Control register defines
+ * ********************************/
+#define DMA_CONTROL_ST		0x00002000	/* Start/Stop Transmission */
+#define DMA_CONTROL_SR		0x00000002	/* Start/Stop Receive */
+
+/* **************************************
+   DMA Interrupt Enable register defines
+ * **************************************/
+/**** NORMAL INTERRUPT ****/
+#define DMA_INTR_ENA_NIE 0x00010000	/* Normal Summary */
+#define DMA_INTR_ENA_TIE 0x00000001	/* Transmit Interrupt */
+#define DMA_INTR_ENA_TUE 0x00000004	/* Transmit Buffer Unavailable */
+#define DMA_INTR_ENA_RIE 0x00000040	/* Receive Interrupt */
+#define DMA_INTR_ENA_ERE 0x00004000	/* Early Receive */
+
+#define DMA_INTR_NORMAL	(DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
+			DMA_INTR_ENA_TIE)
+
+/**** ABNORMAL INTERRUPT ****/
+#define DMA_INTR_ENA_AIE 0x00008000	/* Abnormal Summary */
+#define DMA_INTR_ENA_FBE 0x00002000	/* Fatal Bus Error */
+#define DMA_INTR_ENA_ETE 0x00000400	/* Early Transmit */
+#define DMA_INTR_ENA_RWE 0x00000200	/* Receive Watchdog */
+#define DMA_INTR_ENA_RSE 0x00000100	/* Receive Stopped */
+#define DMA_INTR_ENA_RUE 0x00000080	/* Receive Buffer Unavailable */
+#define DMA_INTR_ENA_UNE 0x00000020	/* Tx Underflow */
+#define DMA_INTR_ENA_OVE 0x00000010	/* Receive Overflow */
+#define DMA_INTR_ENA_TJE 0x00000008	/* Transmit Jabber */
+#define DMA_INTR_ENA_TSE 0x00000002	/* Transmit Stopped */
+
+#define DMA_INTR_ABNORMAL	(DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
+				DMA_INTR_ENA_UNE)
+
+/* DMA default interrupt mask */
+#define DMA_INTR_DEFAULT_MASK	(DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
+
+/* ****************************
+ *  DMA Status register defines
+ * ****************************/
+#define DMA_STATUS_GPI		0x10000000	/* PMT interrupt */
+#define DMA_STATUS_GMI		0x08000000	/* MMC interrupt */
+#define DMA_STATUS_GLI		0x04000000	/* GMAC Line interface int. */
+#define DMA_STATUS_GMI		0x08000000
+#define DMA_STATUS_GLI		0x04000000
+#define DMA_STATUS_EB_MASK	0x00380000	/* Error Bits Mask */
+#define DMA_STATUS_EB_TX_ABORT	0x00080000	/* Error Bits - TX Abort */
+#define DMA_STATUS_EB_RX_ABORT	0x00100000	/* Error Bits - RX Abort */
+#define DMA_STATUS_TS_MASK	0x00700000	/* Transmit Process State */
+#define DMA_STATUS_TS_SHIFT	20
+#define DMA_STATUS_RS_MASK	0x000e0000	/* Receive Process State */
+#define DMA_STATUS_RS_SHIFT	17
+#define DMA_STATUS_NIS	0x00010000	/* Normal Interrupt Summary */
+#define DMA_STATUS_AIS	0x00008000	/* Abnormal Interrupt Summary */
+#define DMA_STATUS_ERI	0x00004000	/* Early Receive Interrupt */
+#define DMA_STATUS_FBI	0x00002000	/* Fatal Bus Error Interrupt */
+#define DMA_STATUS_ETI	0x00000400	/* Early Transmit Interrupt */
+#define DMA_STATUS_RWT	0x00000200	/* Receive Watchdog Timeout */
+#define DMA_STATUS_RPS	0x00000100	/* Receive Process Stopped */
+#define DMA_STATUS_RU	0x00000080	/* Receive Buffer Unavailable */
+#define DMA_STATUS_RI	0x00000040	/* Receive Interrupt */
+#define DMA_STATUS_UNF	0x00000020	/* Transmit Underflow */
+#define DMA_STATUS_OVF	0x00000010	/* Receive Overflow */
+#define DMA_STATUS_TJT	0x00000008	/* Transmit Jabber Timeout */
+#define DMA_STATUS_TU	0x00000004	/* Transmit Buffer Unavailable */
+#define DMA_STATUS_TPS	0x00000002	/* Transmit Process Stopped */
+#define DMA_STATUS_TI	0x00000001	/* Transmit Interrupt */
+
+/* Other defines */
+#define HASH_TABLE_SIZE 64
+#define PAUSE_TIME 0x200
+
+/* Flow Control defines */
+#define FLOW_OFF	0
+#define FLOW_RX		1
+#define FLOW_TX		2
+#define FLOW_AUTO	(FLOW_TX | FLOW_RX)
+
+/* DMA STORE-AND-FORWARD Operation Mode */
+#define SF_DMA_MODE 1
+
+#define HW_CSUM 1
+#define NO_HW_CSUM 0
+
+/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
+#define BUF_SIZE_16KiB 16384
+#define BUF_SIZE_8KiB 8192
+#define BUF_SIZE_4KiB 4096
+#define BUF_SIZE_2KiB 2048
+
+/* Power Down and WOL */
+#define PMT_NOT_SUPPORTED 0
+#define PMT_SUPPORTED 1
+
+/* Common MAC defines */
+#define MAC_CTRL_REG		0x00000000	/* MAC Control */
+#define MAC_ENABLE_TX		0x00000008	/* Transmitter Enable */
+#define MAC_RNABLE_RX		0x00000004	/* Receiver Enable */
+
+/* MAC Management Counters register */
+#define MMC_CONTROL		0x00000100	/* MMC Control */
+#define MMC_HIGH_INTR		0x00000104	/* MMC High Interrupt */
+#define MMC_LOW_INTR		0x00000108	/* MMC Low Interrupt */
+#define MMC_HIGH_INTR_MASK	0x0000010c	/* MMC High Interrupt Mask */
+#define MMC_LOW_INTR_MASK	0x00000110	/* MMC Low Interrupt Mask */
+
+#define MMC_CONTROL_MAX_FRM_MASK	0x0003ff8	/* Maximum Frame Size */
+#define MMC_CONTROL_MAX_FRM_SHIFT	3
+#define MMC_CONTROL_MAX_FRAME		0x7FF
+
+struct stmmac_extra_stats {
+	/* Transmit errors */
+	unsigned long tx_underflow ____cacheline_aligned;
+	unsigned long tx_carrier;
+	unsigned long tx_losscarrier;
+	unsigned long tx_heartbeat;
+	unsigned long tx_deferred;
+	unsigned long tx_vlan;
+	unsigned long tx_jabber;
+	unsigned long tx_frame_flushed;
+	unsigned long tx_payload_error;
+	unsigned long tx_ip_header_error;
+	/* Receive errors */
+	unsigned long rx_desc;
+	unsigned long rx_partial;
+	unsigned long rx_runt;
+	unsigned long rx_toolong;
+	unsigned long rx_collision;
+	unsigned long rx_crc;
+	unsigned long rx_lenght;
+	unsigned long rx_mii;
+	unsigned long rx_multicast;
+	unsigned long rx_gmac_overflow;
+	unsigned long rx_watchdog;
+	unsigned long da_rx_filter_fail;
+	unsigned long sa_rx_filter_fail;
+	unsigned long rx_missed_cntr;
+	unsigned long rx_overflow_cntr;
+	unsigned long rx_vlan;
+	/* Tx/Rx IRQ errors */
+	unsigned long tx_undeflow_irq;
+	unsigned long tx_process_stopped_irq;
+	unsigned long tx_jabber_irq;
+	unsigned long rx_overflow_irq;
+	unsigned long rx_buf_unav_irq;
+	unsigned long rx_process_stopped_irq;
+	unsigned long rx_watchdog_irq;
+	unsigned long tx_early_irq;
+	unsigned long fatal_bus_error_irq;
+	/* Extra info */
+	unsigned long threshold;
+	unsigned long tx_pkt_n;
+	unsigned long rx_pkt_n;
+	unsigned long poll_n;
+	unsigned long sched_timer_n;
+	unsigned long normal_irq_n;
+};
+
+/* GMAC core can compute the checksums in HW. */
+enum rx_frame_status {
+	good_frame = 0,
+	discard_frame = 1,
+	csum_none = 2,
+};
+
+static inline void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
+			 unsigned int high, unsigned int low)
+{
+	unsigned long data;
+
+	data = (addr[5] << 8) | addr[4];
+	writel(data, ioaddr + high);
+	data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+	writel(data, ioaddr + low);
+
+	return;
+}
+
+static inline void stmmac_get_mac_addr(unsigned long ioaddr,
+				unsigned char *addr, unsigned int high,
+				unsigned int low)
+{
+	unsigned int hi_addr, lo_addr;
+
+	/* Read the MAC address from the hardware */
+	hi_addr = readl(ioaddr + high);
+	lo_addr = readl(ioaddr + low);
+
+	/* Extract the MAC address from the high and low words */
+	addr[0] = lo_addr & 0xff;
+	addr[1] = (lo_addr >> 8) & 0xff;
+	addr[2] = (lo_addr >> 16) & 0xff;
+	addr[3] = (lo_addr >> 24) & 0xff;
+	addr[4] = hi_addr & 0xff;
+	addr[5] = (hi_addr >> 8) & 0xff;
+
+	return;
+}
+
+struct stmmac_ops {
+	/* MAC core initialization */
+	void (*core_init) (unsigned long ioaddr) ____cacheline_aligned;
+	/* DMA core initialization */
+	int (*dma_init) (unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx);
+	/* Dump MAC registers */
+	void (*dump_mac_regs) (unsigned long ioaddr);
+	/* Dump DMA registers */
+	void (*dump_dma_regs) (unsigned long ioaddr);
+	/* Set tx/rx threshold in the csr6 register
+	 * An invalid value enables the store-and-forward mode */
+	void (*dma_mode) (unsigned long ioaddr, int txmode, int rxmode);
+	/* To track extra statistic (if supported) */
+	void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x,
+				   unsigned long ioaddr);
+	/* RX descriptor ring initialization */
+	void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size,
+				int disable_rx_ic);
+	/* TX descriptor ring initialization */
+	void (*init_tx_desc) (struct dma_desc *p, unsigned int ring_size);
+
+	/* Invoked by the xmit function to prepare the tx descriptor */
+	void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len,
+				 int csum_flag);
+	/* Set/get the owner of the descriptor */
+	void (*set_tx_owner) (struct dma_desc *p);
+	int (*get_tx_owner) (struct dma_desc *p);
+	/* Invoked by the xmit function to close the tx descriptor */
+	void (*close_tx_desc) (struct dma_desc *p);
+	/* Clean the tx descriptor as soon as the tx irq is received */
+	void (*release_tx_desc) (struct dma_desc *p);
+	/* Clear interrupt on tx frame completion. When this bit is
+	 * set an interrupt happens as soon as the frame is transmitted */
+	void (*clear_tx_ic) (struct dma_desc *p);
+	/* Last tx segment reports the transmit status */
+	int (*get_tx_ls) (struct dma_desc *p);
+	/* Return the transmit status looking at the TDES1 */
+	int (*tx_status) (void *data, struct stmmac_extra_stats *x,
+			  struct dma_desc *p, unsigned long ioaddr);
+	/* Get the buffer size from the descriptor */
+	int (*get_tx_len) (struct dma_desc *p);
+	/* Handle extra events on specific interrupts hw dependent */
+	void (*host_irq_status) (unsigned long ioaddr);
+	int (*get_rx_owner) (struct dma_desc *p);
+	void (*set_rx_owner) (struct dma_desc *p);
+	/* Get the receive frame size */
+	int (*get_rx_frame_len) (struct dma_desc *p);
+	/* Return the reception status looking at the RDES1 */
+	int (*rx_status) (void *data, struct stmmac_extra_stats *x,
+			  struct dma_desc *p);
+	/* Multicast filter setting */
+	void (*set_filter) (struct net_device *dev);
+	/* Flow control setting */
+	void (*flow_ctrl) (unsigned long ioaddr, unsigned int duplex,
+			   unsigned int fc, unsigned int pause_time);
+	/* Set power management mode (e.g. magic frame) */
+	void (*pmt) (unsigned long ioaddr, unsigned long mode);
+	/* Set/Get Unicast MAC addresses */
+	void (*set_umac_addr) (unsigned long ioaddr, unsigned char *addr,
+			     unsigned int reg_n);
+	void (*get_umac_addr) (unsigned long ioaddr, unsigned char *addr,
+			     unsigned int reg_n);
+};
+
+struct mac_link {
+	int port;
+	int duplex;
+	int speed;
+};
+
+struct mii_regs {
+	unsigned int addr;	/* MII Address */
+	unsigned int data;	/* MII Data */
+};
+
+struct hw_cap {
+	unsigned int version;	/* Core Version register (GMAC) */
+	unsigned int pmt;	/* Power-Down mode (GMAC) */
+	struct mac_link link;
+	struct mii_regs mii;
+};
+
+struct mac_device_info {
+	struct hw_cap hw;
+	struct stmmac_ops *ops;
+};
+
+struct mac_device_info *gmac_setup(unsigned long addr);
+struct mac_device_info *mac100_setup(unsigned long addr);
diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h
new file mode 100644
index 000000000000..6d2a0b2f5e57
--- /dev/null
+++ b/drivers/net/stmmac/descs.h
@@ -0,0 +1,163 @@
+/*******************************************************************************
+  Header File to describe the DMA descriptors
+  Use enhanced descriptors in case of GMAC Cores.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+struct dma_desc {
+	/* Receive descriptor */
+	union {
+		struct {
+			/* RDES0 */
+			u32 reserved1:1;
+			u32 crc_error:1;
+			u32 dribbling:1;
+			u32 mii_error:1;
+			u32 receive_watchdog:1;
+			u32 frame_type:1;
+			u32 collision:1;
+			u32 frame_too_long:1;
+			u32 last_descriptor:1;
+			u32 first_descriptor:1;
+			u32 multicast_frame:1;
+			u32 run_frame:1;
+			u32 length_error:1;
+			u32 partial_frame_error:1;
+			u32 descriptor_error:1;
+			u32 error_summary:1;
+			u32 frame_length:14;
+			u32 filtering_fail:1;
+			u32 own:1;
+			/* RDES1 */
+			u32 buffer1_size:11;
+			u32 buffer2_size:11;
+			u32 reserved2:2;
+			u32 second_address_chained:1;
+			u32 end_ring:1;
+			u32 reserved3:5;
+			u32 disable_ic:1;
+		} rx;
+		struct {
+			/* RDES0 */
+			u32 payload_csum_error:1;
+			u32 crc_error:1;
+			u32 dribbling:1;
+			u32 error_gmii:1;
+			u32 receive_watchdog:1;
+			u32 frame_type:1;
+			u32 late_collision:1;
+			u32 ipc_csum_error:1;
+			u32 last_descriptor:1;
+			u32 first_descriptor:1;
+			u32 vlan_tag:1;
+			u32 overflow_error:1;
+			u32 length_error:1;
+			u32 sa_filter_fail:1;
+			u32 descriptor_error:1;
+			u32 error_summary:1;
+			u32 frame_length:14;
+			u32 da_filter_fail:1;
+			u32 own:1;
+			/* RDES1 */
+			u32 buffer1_size:13;
+			u32 reserved1:1;
+			u32 second_address_chained:1;
+			u32 end_ring:1;
+			u32 buffer2_size:13;
+			u32 reserved2:2;
+			u32 disable_ic:1;
+		} erx;		/* -- enhanced -- */
+
+		/* Transmit descriptor */
+		struct {
+			/* TDES0 */
+			u32 deferred:1;
+			u32 underflow_error:1;
+			u32 excessive_deferral:1;
+			u32 collision_count:4;
+			u32 heartbeat_fail:1;
+			u32 excessive_collisions:1;
+			u32 late_collision:1;
+			u32 no_carrier:1;
+			u32 loss_carrier:1;
+			u32 reserved1:3;
+			u32 error_summary:1;
+			u32 reserved2:15;
+			u32 own:1;
+			/* TDES1 */
+			u32 buffer1_size:11;
+			u32 buffer2_size:11;
+			u32 reserved3:1;
+			u32 disable_padding:1;
+			u32 second_address_chained:1;
+			u32 end_ring:1;
+			u32 crc_disable:1;
+			u32 reserved4:2;
+			u32 first_segment:1;
+			u32 last_segment:1;
+			u32 interrupt:1;
+		} tx;
+		struct {
+			/* TDES0 */
+			u32 deferred:1;
+			u32 underflow_error:1;
+			u32 excessive_deferral:1;
+			u32 collision_count:4;
+			u32 vlan_frame:1;
+			u32 excessive_collisions:1;
+			u32 late_collision:1;
+			u32 no_carrier:1;
+			u32 loss_carrier:1;
+			u32 payload_error:1;
+			u32 frame_flushed:1;
+			u32 jabber_timeout:1;
+			u32 error_summary:1;
+			u32 ip_header_error:1;
+			u32 time_stamp_status:1;
+			u32 reserved1:2;
+			u32 second_address_chained:1;
+			u32 end_ring:1;
+			u32 checksum_insertion:2;
+			u32 reserved2:1;
+			u32 time_stamp_enable:1;
+			u32 disable_padding:1;
+			u32 crc_disable:1;
+			u32 first_segment:1;
+			u32 last_segment:1;
+			u32 interrupt:1;
+			u32 own:1;
+			/* TDES1 */
+			u32 buffer1_size:13;
+			u32 reserved3:3;
+			u32 buffer2_size:13;
+			u32 reserved4:3;
+		} etx;		/* -- enhanced -- */
+	} des01;
+	unsigned int des2;
+	unsigned int des3;
+};
+
+/* Transmit checksum insertion control */
+enum tdes_csum_insertion {
+	cic_disabled = 0,	/* Checksum Insertion Control */
+	cic_only_ip = 1,	/* Only IP header */
+	cic_no_pseudoheader = 2,	/* IP header but pseudoheader
+					 * is not calculated */
+	cic_full = 3,		/* IP header and pseudoheader */
+};
diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
new file mode 100644
index 000000000000..b624bb5bae0a
--- /dev/null
+++ b/drivers/net/stmmac/gmac.c
@@ -0,0 +1,693 @@
+/*******************************************************************************
+  This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
+  DWC Ether MAC 10/100/1000 Universal version 3.41a  has been used for
+  developing this code.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "stmmac.h"
+#include "gmac.h"
+
+#undef GMAC_DEBUG
+/*#define GMAC_DEBUG*/
+#undef FRAME_FILTER_DEBUG
+/*#define FRAME_FILTER_DEBUG*/
+#ifdef GMAC_DEBUG
+#define DBG(fmt, args...)  printk(fmt, ## args)
+#else
+#define DBG(fmt, args...)  do { } while (0)
+#endif
+
+static void gmac_dump_regs(unsigned long ioaddr)
+{
+	int i;
+	pr_info("\t----------------------------------------------\n"
+	       "\t  GMAC registers (base addr = 0x%8x)\n"
+	       "\t----------------------------------------------\n",
+	       (unsigned int)ioaddr);
+
+	for (i = 0; i < 55; i++) {
+		int offset = i * 4;
+		pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i,
+		       offset, readl(ioaddr + offset));
+	}
+	return;
+}
+
+static int gmac_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx)
+{
+	u32 value = readl(ioaddr + DMA_BUS_MODE);
+	/* DMA SW reset */
+	value |= DMA_BUS_MODE_SFT_RESET;
+	writel(value, ioaddr + DMA_BUS_MODE);
+	do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+	value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL |
+	    ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
+	     (pbl << DMA_BUS_MODE_RPBL_SHIFT));
+
+#ifdef CONFIG_STMMAC_DA
+	value |= DMA_BUS_MODE_DA;	/* Rx has priority over tx */
+#endif
+	writel(value, ioaddr + DMA_BUS_MODE);
+
+	/* Mask interrupts by writing to CSR7 */
+	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+
+	/* The base address of the RX/TX descriptor lists must be written into
+	 * DMA CSR3 and CSR4, respectively. */
+	writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
+	writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+
+	return 0;
+}
+
+/* Transmit FIFO flush operation */
+static void gmac_flush_tx_fifo(unsigned long ioaddr)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+	writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);
+
+	do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
+}
+
+static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode,
+				    int rxmode)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+	if (txmode == SF_DMA_MODE) {
+		DBG(KERN_DEBUG "GMAC: enabling TX store and forward mode\n");
+		/* Transmit COE type 2 cannot be done in cut-through mode. */
+		csr6 |= DMA_CONTROL_TSF;
+		/* Operating on second frame increase the performance
+		 * especially when transmit store-and-forward is used.*/
+		csr6 |= DMA_CONTROL_OSF;
+	} else {
+		DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode"
+			      " (threshold = %d)\n", txmode);
+		csr6 &= ~DMA_CONTROL_TSF;
+		csr6 &= DMA_CONTROL_TC_TX_MASK;
+		/* Set the transmit threashold */
+		if (txmode <= 32)
+			csr6 |= DMA_CONTROL_TTC_32;
+		else if (txmode <= 64)
+			csr6 |= DMA_CONTROL_TTC_64;
+		else if (txmode <= 128)
+			csr6 |= DMA_CONTROL_TTC_128;
+		else if (txmode <= 192)
+			csr6 |= DMA_CONTROL_TTC_192;
+		else
+			csr6 |= DMA_CONTROL_TTC_256;
+	}
+
+	if (rxmode == SF_DMA_MODE) {
+		DBG(KERN_DEBUG "GMAC: enabling RX store and forward mode\n");
+		csr6 |= DMA_CONTROL_RSF;
+	} else {
+		DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode"
+			      " (threshold = %d)\n", rxmode);
+		csr6 &= ~DMA_CONTROL_RSF;
+		csr6 &= DMA_CONTROL_TC_RX_MASK;
+		if (rxmode <= 32)
+			csr6 |= DMA_CONTROL_RTC_32;
+		else if (rxmode <= 64)
+			csr6 |= DMA_CONTROL_RTC_64;
+		else if (rxmode <= 96)
+			csr6 |= DMA_CONTROL_RTC_96;
+		else
+			csr6 |= DMA_CONTROL_RTC_128;
+	}
+
+	writel(csr6, ioaddr + DMA_CONTROL);
+	return;
+}
+
+/* Not yet implemented --- no RMON module */
+static void gmac_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
+				   unsigned long ioaddr)
+{
+	return;
+}
+
+static void gmac_dump_dma_regs(unsigned long ioaddr)
+{
+	int i;
+	pr_info(" DMA registers\n");
+	for (i = 0; i < 22; i++) {
+		if ((i < 9) || (i > 17)) {
+			int offset = i * 4;
+			pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i,
+			       (DMA_BUS_MODE + offset),
+			       readl(ioaddr + DMA_BUS_MODE + offset));
+		}
+	}
+	return;
+}
+
+static int gmac_get_tx_frame_status(void *data, struct stmmac_extra_stats *x,
+				    struct dma_desc *p, unsigned long ioaddr)
+{
+	int ret = 0;
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+
+	if (unlikely(p->des01.etx.error_summary)) {
+		DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx);
+		if (unlikely(p->des01.etx.jabber_timeout)) {
+			DBG(KERN_ERR "\tjabber_timeout error\n");
+			x->tx_jabber++;
+		}
+
+		if (unlikely(p->des01.etx.frame_flushed)) {
+			DBG(KERN_ERR "\tframe_flushed error\n");
+			x->tx_frame_flushed++;
+			gmac_flush_tx_fifo(ioaddr);
+		}
+
+		if (unlikely(p->des01.etx.loss_carrier)) {
+			DBG(KERN_ERR "\tloss_carrier error\n");
+			x->tx_losscarrier++;
+			stats->tx_carrier_errors++;
+		}
+		if (unlikely(p->des01.etx.no_carrier)) {
+			DBG(KERN_ERR "\tno_carrier error\n");
+			x->tx_carrier++;
+			stats->tx_carrier_errors++;
+		}
+		if (unlikely(p->des01.etx.late_collision)) {
+			DBG(KERN_ERR "\tlate_collision error\n");
+			stats->collisions += p->des01.etx.collision_count;
+		}
+		if (unlikely(p->des01.etx.excessive_collisions)) {
+			DBG(KERN_ERR "\texcessive_collisions\n");
+			stats->collisions += p->des01.etx.collision_count;
+		}
+		if (unlikely(p->des01.etx.excessive_deferral)) {
+			DBG(KERN_INFO "\texcessive tx_deferral\n");
+			x->tx_deferred++;
+		}
+
+		if (unlikely(p->des01.etx.underflow_error)) {
+			DBG(KERN_ERR "\tunderflow error\n");
+			gmac_flush_tx_fifo(ioaddr);
+			x->tx_underflow++;
+		}
+
+		if (unlikely(p->des01.etx.ip_header_error)) {
+			DBG(KERN_ERR "\tTX IP header csum error\n");
+			x->tx_ip_header_error++;
+		}
+
+		if (unlikely(p->des01.etx.payload_error)) {
+			DBG(KERN_ERR "\tAddr/Payload csum error\n");
+			x->tx_payload_error++;
+			gmac_flush_tx_fifo(ioaddr);
+		}
+
+		ret = -1;
+	}
+
+	if (unlikely(p->des01.etx.deferred)) {
+		DBG(KERN_INFO "GMAC TX status: tx deferred\n");
+		x->tx_deferred++;
+	}
+#ifdef STMMAC_VLAN_TAG_USED
+	if (p->des01.etx.vlan_frame) {
+		DBG(KERN_INFO "GMAC TX status: VLAN frame\n");
+		x->tx_vlan++;
+	}
+#endif
+
+	return ret;
+}
+
+static int gmac_get_tx_len(struct dma_desc *p)
+{
+	return p->des01.etx.buffer1_size;
+}
+
+static int gmac_coe_rdes0(int ipc_err, int type, int payload_err)
+{
+	int ret = good_frame;
+	u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7;
+
+	/* bits 5 7 0 | Frame status
+	 * ----------------------------------------------------------
+	 *      0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects)
+	 *      1 0 0 | IPv4/6 No CSUM errorS.
+	 *      1 0 1 | IPv4/6 CSUM PAYLOAD error
+	 *      1 1 0 | IPv4/6 CSUM IP HR error
+	 *      1 1 1 | IPv4/6 IP PAYLOAD AND HEADER errorS
+	 *      0 0 1 | IPv4/6 unsupported IP PAYLOAD
+	 *      0 1 1 | COE bypassed.. no IPv4/6 frame
+	 *      0 1 0 | Reserved.
+	 */
+	if (status == 0x0) {
+		DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n");
+		ret = good_frame;
+	} else if (status == 0x4) {
+		DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n");
+		ret = good_frame;
+	} else if (status == 0x5) {
+		DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n");
+		ret = csum_none;
+	} else if (status == 0x6) {
+		DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n");
+		ret = csum_none;
+	} else if (status == 0x7) {
+		DBG(KERN_ERR
+		    "RX Des0 status: IPv4/6 Header and Payload Error.\n");
+		ret = csum_none;
+	} else if (status == 0x1) {
+		DBG(KERN_ERR
+		    "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n");
+		ret = discard_frame;
+	} else if (status == 0x3) {
+		DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n");
+		ret = discard_frame;
+	}
+	return ret;
+}
+
+static int gmac_get_rx_frame_status(void *data, struct stmmac_extra_stats *x,
+				    struct dma_desc *p)
+{
+	int ret = good_frame;
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+
+	if (unlikely(p->des01.erx.error_summary)) {
+		DBG(KERN_ERR "GMAC RX Error Summary... 0x%08x\n", p->des01.erx);
+		if (unlikely(p->des01.erx.descriptor_error)) {
+			DBG(KERN_ERR "\tdescriptor error\n");
+			x->rx_desc++;
+			stats->rx_length_errors++;
+		}
+		if (unlikely(p->des01.erx.overflow_error)) {
+			DBG(KERN_ERR "\toverflow error\n");
+			x->rx_gmac_overflow++;
+		}
+
+		if (unlikely(p->des01.erx.ipc_csum_error))
+			DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n");
+
+		if (unlikely(p->des01.erx.late_collision)) {
+			DBG(KERN_ERR "\tlate_collision error\n");
+			stats->collisions++;
+			stats->collisions++;
+		}
+		if (unlikely(p->des01.erx.receive_watchdog)) {
+			DBG(KERN_ERR "\treceive_watchdog error\n");
+			x->rx_watchdog++;
+		}
+		if (unlikely(p->des01.erx.error_gmii)) {
+			DBG(KERN_ERR "\tReceive Error\n");
+			x->rx_mii++;
+		}
+		if (unlikely(p->des01.erx.crc_error)) {
+			DBG(KERN_ERR "\tCRC error\n");
+			x->rx_crc++;
+			stats->rx_crc_errors++;
+		}
+		ret = discard_frame;
+	}
+
+	/* After a payload csum error, the ES bit is set.
+	 * It doesn't match with the information reported into the databook.
+	 * At any rate, we need to understand if the CSUM hw computation is ok
+	 * and report this info to the upper layers. */
+	ret = gmac_coe_rdes0(p->des01.erx.ipc_csum_error,
+		p->des01.erx.frame_type, p->des01.erx.payload_csum_error);
+
+	if (unlikely(p->des01.erx.dribbling)) {
+		DBG(KERN_ERR "GMAC RX: dribbling error\n");
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.erx.sa_filter_fail)) {
+		DBG(KERN_ERR "GMAC RX : Source Address filter fail\n");
+		x->sa_rx_filter_fail++;
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.erx.da_filter_fail)) {
+		DBG(KERN_ERR "GMAC RX : Destination Address filter fail\n");
+		x->da_rx_filter_fail++;
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.erx.length_error)) {
+		DBG(KERN_ERR "GMAC RX: length_error error\n");
+		x->rx_lenght++;
+		ret = discard_frame;
+	}
+#ifdef STMMAC_VLAN_TAG_USED
+	if (p->des01.erx.vlan_tag) {
+		DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n");
+		x->rx_vlan++;
+	}
+#endif
+	return ret;
+}
+
+static void gmac_irq_status(unsigned long ioaddr)
+{
+	u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
+
+	/* Not used events (e.g. MMC interrupts) are not handled. */
+	if ((intr_status & mmc_tx_irq))
+		DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
+		    readl(ioaddr + GMAC_MMC_TX_INTR));
+	if (unlikely(intr_status & mmc_rx_irq))
+		DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
+		    readl(ioaddr + GMAC_MMC_RX_INTR));
+	if (unlikely(intr_status & mmc_rx_csum_offload_irq))
+		DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
+		    readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD));
+	if (unlikely(intr_status & pmt_irq)) {
+		DBG(KERN_DEBUG "GMAC: received Magic frame\n");
+		/* clear the PMT bits 5 and 6 by reading the PMT
+		 * status register. */
+		readl(ioaddr + GMAC_PMT);
+	}
+
+	return;
+}
+
+static void gmac_core_init(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + GMAC_CONTROL);
+	value |= GMAC_CORE_INIT;
+	writel(value, ioaddr + GMAC_CONTROL);
+
+	/* STBus Bridge Configuration */
+	/*writel(0xc5608, ioaddr + 0x00007000);*/
+
+	/* Freeze MMC counters */
+	writel(0x8, ioaddr + GMAC_MMC_CTRL);
+	/* Mask GMAC interrupts */
+	writel(0x207, ioaddr + GMAC_INT_MASK);
+
+#ifdef STMMAC_VLAN_TAG_USED
+	/* Tag detection without filtering */
+	writel(0x0, ioaddr + GMAC_VLAN_TAG);
+#endif
+	return;
+}
+
+static void gmac_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
+				unsigned int reg_n)
+{
+	stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
+				GMAC_ADDR_LOW(reg_n));
+}
+
+static void gmac_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
+				unsigned int reg_n)
+{
+	stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
+				GMAC_ADDR_LOW(reg_n));
+}
+
+static void gmac_set_filter(struct net_device *dev)
+{
+	unsigned long ioaddr = dev->base_addr;
+	unsigned int value = 0;
+
+	DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
+	    __func__, dev->mc_count, dev->uc_count);
+
+	if (dev->flags & IFF_PROMISC)
+		value = GMAC_FRAME_FILTER_PR;
+	else if ((dev->mc_count > HASH_TABLE_SIZE)
+		   || (dev->flags & IFF_ALLMULTI)) {
+		value = GMAC_FRAME_FILTER_PM;	/* pass all multi */
+		writel(0xffffffff, ioaddr + GMAC_HASH_HIGH);
+		writel(0xffffffff, ioaddr + GMAC_HASH_LOW);
+	} else if (dev->mc_count > 0) {
+		int i;
+		u32 mc_filter[2];
+		struct dev_mc_list *mclist;
+
+		/* Hash filter for multicast */
+		value = GMAC_FRAME_FILTER_HMC;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list;
+		     mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+			/* The upper 6 bits of the calculated CRC are used to
+			   index the contens of the hash table */
+			int bit_nr =
+			    bitrev32(~crc32_le(~0, mclist->dmi_addr, 6)) >> 26;
+			/* The most significant bit determines the register to
+			 * use (H/L) while the other 5 bits determine the bit
+			 * within the register. */
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+		}
+		writel(mc_filter[0], ioaddr + GMAC_HASH_LOW);
+		writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH);
+	}
+
+	/* Handle multiple unicast addresses (perfect filtering)*/
+	if (dev->uc_count > GMAC_MAX_UNICAST_ADDRESSES)
+		/* Switch to promiscuous mode is more than 16 addrs
+		   are required */
+		value |= GMAC_FRAME_FILTER_PR;
+	else {
+		int i;
+		struct dev_addr_list *uc_ptr = dev->uc_list;
+
+			for (i = 0; i < dev->uc_count; i++) {
+				gmac_set_umac_addr(ioaddr, uc_ptr->da_addr,
+						i + 1);
+
+				DBG(KERN_INFO "\t%d "
+				"- Unicast addr %02x:%02x:%02x:%02x:%02x:"
+				"%02x\n", i + 1,
+				uc_ptr->da_addr[0], uc_ptr->da_addr[1],
+				uc_ptr->da_addr[2], uc_ptr->da_addr[3],
+				uc_ptr->da_addr[4], uc_ptr->da_addr[5]);
+				uc_ptr = uc_ptr->next;
+		}
+	}
+
+#ifdef FRAME_FILTER_DEBUG
+	/* Enable Receive all mode (to debug filtering_fail errors) */
+	value |= GMAC_FRAME_FILTER_RA;
+#endif
+	writel(value, ioaddr + GMAC_FRAME_FILTER);
+
+	DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: "
+	    "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER),
+	    readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW));
+
+	return;
+}
+
+static void gmac_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
+			   unsigned int fc, unsigned int pause_time)
+{
+	unsigned int flow = 0;
+
+	DBG(KERN_DEBUG "GMAC Flow-Control:\n");
+	if (fc & FLOW_RX) {
+		DBG(KERN_DEBUG "\tReceive Flow-Control ON\n");
+		flow |= GMAC_FLOW_CTRL_RFE;
+	}
+	if (fc & FLOW_TX) {
+		DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n");
+		flow |= GMAC_FLOW_CTRL_TFE;
+	}
+
+	if (duplex) {
+		DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time);
+		flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT);
+	}
+
+	writel(flow, ioaddr + GMAC_FLOW_CTRL);
+	return;
+}
+
+static void gmac_pmt(unsigned long ioaddr, unsigned long mode)
+{
+	unsigned int pmt = 0;
+
+	if (mode == WAKE_MAGIC) {
+		DBG(KERN_DEBUG "GMAC: WOL Magic frame\n");
+		pmt |= power_down | magic_pkt_en;
+	} else if (mode == WAKE_UCAST) {
+		DBG(KERN_DEBUG "GMAC: WOL on global unicast\n");
+		pmt |= global_unicast;
+	}
+
+	writel(pmt, ioaddr + GMAC_PMT);
+	return;
+}
+
+static void gmac_init_rx_desc(struct dma_desc *p, unsigned int ring_size,
+				int disable_rx_ic)
+{
+	int i;
+	for (i = 0; i < ring_size; i++) {
+		p->des01.erx.own = 1;
+		p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1;
+		/* To support jumbo frames */
+		p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1;
+		if (i == ring_size - 1)
+			p->des01.erx.end_ring = 1;
+		if (disable_rx_ic)
+			p->des01.erx.disable_ic = 1;
+		p++;
+	}
+	return;
+}
+
+static void gmac_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+	int i;
+
+	for (i = 0; i < ring_size; i++) {
+		p->des01.etx.own = 0;
+		if (i == ring_size - 1)
+			p->des01.etx.end_ring = 1;
+		p++;
+	}
+
+	return;
+}
+
+static int gmac_get_tx_owner(struct dma_desc *p)
+{
+	return p->des01.etx.own;
+}
+
+static int gmac_get_rx_owner(struct dma_desc *p)
+{
+	return p->des01.erx.own;
+}
+
+static void gmac_set_tx_owner(struct dma_desc *p)
+{
+	p->des01.etx.own = 1;
+}
+
+static void gmac_set_rx_owner(struct dma_desc *p)
+{
+	p->des01.erx.own = 1;
+}
+
+static int gmac_get_tx_ls(struct dma_desc *p)
+{
+	return p->des01.etx.last_segment;
+}
+
+static void gmac_release_tx_desc(struct dma_desc *p)
+{
+	int ter = p->des01.etx.end_ring;
+
+	memset(p, 0, sizeof(struct dma_desc));
+	p->des01.etx.end_ring = ter;
+
+	return;
+}
+
+static void gmac_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
+				 int csum_flag)
+{
+	p->des01.etx.first_segment = is_fs;
+	if (unlikely(len > BUF_SIZE_4KiB)) {
+		p->des01.etx.buffer1_size = BUF_SIZE_4KiB;
+		p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB;
+	} else {
+		p->des01.etx.buffer1_size = len;
+	}
+	if (likely(csum_flag))
+		p->des01.etx.checksum_insertion = cic_full;
+}
+
+static void gmac_clear_tx_ic(struct dma_desc *p)
+{
+	p->des01.etx.interrupt = 0;
+}
+
+static void gmac_close_tx_desc(struct dma_desc *p)
+{
+	p->des01.etx.last_segment = 1;
+	p->des01.etx.interrupt = 1;
+}
+
+static int gmac_get_rx_frame_len(struct dma_desc *p)
+{
+	return p->des01.erx.frame_length;
+}
+
+struct stmmac_ops gmac_driver = {
+	.core_init = gmac_core_init,
+	.dump_mac_regs = gmac_dump_regs,
+	.dma_init = gmac_dma_init,
+	.dump_dma_regs = gmac_dump_dma_regs,
+	.dma_mode = gmac_dma_operation_mode,
+	.dma_diagnostic_fr = gmac_dma_diagnostic_fr,
+	.tx_status = gmac_get_tx_frame_status,
+	.rx_status = gmac_get_rx_frame_status,
+	.get_tx_len = gmac_get_tx_len,
+	.set_filter = gmac_set_filter,
+	.flow_ctrl = gmac_flow_ctrl,
+	.pmt = gmac_pmt,
+	.init_rx_desc = gmac_init_rx_desc,
+	.init_tx_desc = gmac_init_tx_desc,
+	.get_tx_owner = gmac_get_tx_owner,
+	.get_rx_owner = gmac_get_rx_owner,
+	.release_tx_desc = gmac_release_tx_desc,
+	.prepare_tx_desc = gmac_prepare_tx_desc,
+	.clear_tx_ic = gmac_clear_tx_ic,
+	.close_tx_desc = gmac_close_tx_desc,
+	.get_tx_ls = gmac_get_tx_ls,
+	.set_tx_owner = gmac_set_tx_owner,
+	.set_rx_owner = gmac_set_rx_owner,
+	.get_rx_frame_len = gmac_get_rx_frame_len,
+	.host_irq_status = gmac_irq_status,
+	.set_umac_addr = gmac_set_umac_addr,
+	.get_umac_addr = gmac_get_umac_addr,
+};
+
+struct mac_device_info *gmac_setup(unsigned long ioaddr)
+{
+	struct mac_device_info *mac;
+	u32 uid = readl(ioaddr + GMAC_VERSION);
+
+	pr_info("\tGMAC - user ID: 0x%x, Synopsys ID: 0x%x\n",
+	       ((uid & 0x0000ff00) >> 8), (uid & 0x000000ff));
+
+	mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
+
+	mac->ops = &gmac_driver;
+	mac->hw.pmt = PMT_SUPPORTED;
+	mac->hw.link.port = GMAC_CONTROL_PS;
+	mac->hw.link.duplex = GMAC_CONTROL_DM;
+	mac->hw.link.speed = GMAC_CONTROL_FES;
+	mac->hw.mii.addr = GMAC_MII_ADDR;
+	mac->hw.mii.data = GMAC_MII_DATA;
+
+	return mac;
+}
diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h
new file mode 100644
index 000000000000..684a363120a9
--- /dev/null
+++ b/drivers/net/stmmac/gmac.h
@@ -0,0 +1,204 @@
+/*******************************************************************************
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#define GMAC_CONTROL		0x00000000	/* Configuration */
+#define GMAC_FRAME_FILTER	0x00000004	/* Frame Filter */
+#define GMAC_HASH_HIGH		0x00000008	/* Multicast Hash Table High */
+#define GMAC_HASH_LOW		0x0000000c	/* Multicast Hash Table Low */
+#define GMAC_MII_ADDR		0x00000010	/* MII Address */
+#define GMAC_MII_DATA		0x00000014	/* MII Data */
+#define GMAC_FLOW_CTRL		0x00000018	/* Flow Control */
+#define GMAC_VLAN_TAG		0x0000001c	/* VLAN Tag */
+#define GMAC_VERSION		0x00000020	/* GMAC CORE Version */
+#define GMAC_WAKEUP_FILTER	0x00000028	/* Wake-up Frame Filter */
+
+#define GMAC_INT_STATUS		0x00000038	/* interrupt status register */
+enum gmac_irq_status {
+	time_stamp_irq = 0x0200,
+	mmc_rx_csum_offload_irq = 0x0080,
+	mmc_tx_irq = 0x0040,
+	mmc_rx_irq = 0x0020,
+	mmc_irq = 0x0010,
+	pmt_irq = 0x0008,
+	pcs_ane_irq = 0x0004,
+	pcs_link_irq = 0x0002,
+	rgmii_irq = 0x0001,
+};
+#define GMAC_INT_MASK		0x0000003c	/* interrupt mask register */
+
+/* PMT Control and Status */
+#define GMAC_PMT		0x0000002c
+enum power_event {
+	pointer_reset = 0x80000000,
+	global_unicast = 0x00000200,
+	wake_up_rx_frame = 0x00000040,
+	magic_frame = 0x00000020,
+	wake_up_frame_en = 0x00000004,
+	magic_pkt_en = 0x00000002,
+	power_down = 0x00000001,
+};
+
+/* GMAC HW ADDR regs */
+#define GMAC_ADDR_HIGH(reg)		(0x00000040+(reg * 8))
+#define GMAC_ADDR_LOW(reg)		(0x00000044+(reg * 8))
+#define GMAC_MAX_UNICAST_ADDRESSES	16
+
+#define GMAC_AN_CTRL	0x000000c0	/* AN control */
+#define GMAC_AN_STATUS	0x000000c4	/* AN status */
+#define GMAC_ANE_ADV	0x000000c8	/* Auto-Neg. Advertisement */
+#define GMAC_ANE_LINK	0x000000cc	/* Auto-Neg. link partener ability */
+#define GMAC_ANE_EXP	0x000000d0	/* ANE expansion */
+#define GMAC_TBI	0x000000d4	/* TBI extend status */
+#define GMAC_GMII_STATUS 0x000000d8	/* S/R-GMII status */
+
+/* GMAC Configuration defines */
+#define GMAC_CONTROL_TC	0x01000000	/* Transmit Conf. in RGMII/SGMII */
+#define GMAC_CONTROL_WD	0x00800000	/* Disable Watchdog on receive */
+#define GMAC_CONTROL_JD	0x00400000	/* Jabber disable */
+#define GMAC_CONTROL_BE	0x00200000	/* Frame Burst Enable */
+#define GMAC_CONTROL_JE	0x00100000	/* Jumbo frame */
+enum inter_frame_gap {
+	GMAC_CONTROL_IFG_88 = 0x00040000,
+	GMAC_CONTROL_IFG_80 = 0x00020000,
+	GMAC_CONTROL_IFG_40 = 0x000e0000,
+};
+#define GMAC_CONTROL_DCRS	0x00010000 /* Disable carrier sense during tx */
+#define GMAC_CONTROL_PS		0x00008000 /* Port Select 0:GMI 1:MII */
+#define GMAC_CONTROL_FES	0x00004000 /* Speed 0:10 1:100 */
+#define GMAC_CONTROL_DO		0x00002000 /* Disable Rx Own */
+#define GMAC_CONTROL_LM		0x00001000 /* Loop-back mode */
+#define GMAC_CONTROL_DM		0x00000800 /* Duplex Mode */
+#define GMAC_CONTROL_IPC	0x00000400 /* Checksum Offload */
+#define GMAC_CONTROL_DR		0x00000200 /* Disable Retry */
+#define GMAC_CONTROL_LUD	0x00000100 /* Link up/down */
+#define GMAC_CONTROL_ACS	0x00000080 /* Automatic Pad Stripping */
+#define GMAC_CONTROL_DC		0x00000010 /* Deferral Check */
+#define GMAC_CONTROL_TE		0x00000008 /* Transmitter Enable */
+#define GMAC_CONTROL_RE		0x00000004 /* Receiver Enable */
+
+#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \
+			GMAC_CONTROL_IPC | GMAC_CONTROL_JE | GMAC_CONTROL_BE)
+
+/* GMAC Frame Filter defines */
+#define GMAC_FRAME_FILTER_PR	0x00000001	/* Promiscuous Mode */
+#define GMAC_FRAME_FILTER_HUC	0x00000002	/* Hash Unicast */
+#define GMAC_FRAME_FILTER_HMC	0x00000004	/* Hash Multicast */
+#define GMAC_FRAME_FILTER_DAIF	0x00000008	/* DA Inverse Filtering */
+#define GMAC_FRAME_FILTER_PM	0x00000010	/* Pass all multicast */
+#define GMAC_FRAME_FILTER_DBF	0x00000020	/* Disable Broadcast frames */
+#define GMAC_FRAME_FILTER_SAIF	0x00000100	/* Inverse Filtering */
+#define GMAC_FRAME_FILTER_SAF	0x00000200	/* Source Address Filter */
+#define GMAC_FRAME_FILTER_HPF	0x00000400	/* Hash or perfect Filter */
+#define GMAC_FRAME_FILTER_RA	0x80000000	/* Receive all mode */
+/* GMII ADDR  defines */
+#define GMAC_MII_ADDR_WRITE	0x00000002	/* MII Write */
+#define GMAC_MII_ADDR_BUSY	0x00000001	/* MII Busy */
+/* GMAC FLOW CTRL defines */
+#define GMAC_FLOW_CTRL_PT_MASK	0xffff0000	/* Pause Time Mask */
+#define GMAC_FLOW_CTRL_PT_SHIFT	16
+#define GMAC_FLOW_CTRL_RFE	0x00000004	/* Rx Flow Control Enable */
+#define GMAC_FLOW_CTRL_TFE	0x00000002	/* Tx Flow Control Enable */
+#define GMAC_FLOW_CTRL_FCB_BPA	0x00000001	/* Flow Control Busy ... */
+
+/*--- DMA BLOCK defines ---*/
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_SFT_RESET	0x00000001	/* Software Reset */
+#define DMA_BUS_MODE_DA		0x00000002	/* Arbitration scheme */
+#define DMA_BUS_MODE_DSL_MASK	0x0000007c	/* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT	2	/*   (in DWORDS)      */
+/* Programmable burst length (passed thorugh platform)*/
+#define DMA_BUS_MODE_PBL_MASK	0x00003f00	/* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT	8
+
+enum rx_tx_priority_ratio {
+	double_ratio = 0x00004000,	/*2:1 */
+	triple_ratio = 0x00008000,	/*3:1 */
+	quadruple_ratio = 0x0000c000,	/*4:1 */
+};
+
+#define DMA_BUS_MODE_FB		0x00010000	/* Fixed burst */
+#define DMA_BUS_MODE_RPBL_MASK	0x003e0000	/* Rx-Programmable Burst Len */
+#define DMA_BUS_MODE_RPBL_SHIFT	17
+#define DMA_BUS_MODE_USP	0x00800000
+#define DMA_BUS_MODE_4PBL	0x01000000
+#define DMA_BUS_MODE_AAL	0x02000000
+
+/* DMA CRS Control and Status Register Mapping */
+#define DMA_HOST_TX_DESC	  0x00001048	/* Current Host Tx descriptor */
+#define DMA_HOST_RX_DESC	  0x0000104c	/* Current Host Rx descriptor */
+/*  DMA Bus Mode register defines */
+#define DMA_BUS_PR_RATIO_MASK	  0x0000c000	/* Rx/Tx priority ratio */
+#define DMA_BUS_PR_RATIO_SHIFT	  14
+#define DMA_BUS_FB	  	  0x00010000	/* Fixed Burst */
+
+/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/
+#define DMA_CONTROL_DT		0x04000000 /* Disable Drop TCP/IP csum error */
+#define DMA_CONTROL_RSF		0x02000000 /* Receive Store and Forward */
+#define DMA_CONTROL_DFF		0x01000000 /* Disaable flushing */
+/* Theshold for Activating the FC */
+enum rfa {
+	act_full_minus_1 = 0x00800000,
+	act_full_minus_2 = 0x00800200,
+	act_full_minus_3 = 0x00800400,
+	act_full_minus_4 = 0x00800600,
+};
+/* Theshold for Deactivating the FC */
+enum rfd {
+	deac_full_minus_1 = 0x00400000,
+	deac_full_minus_2 = 0x00400800,
+	deac_full_minus_3 = 0x00401000,
+	deac_full_minus_4 = 0x00401800,
+};
+#define DMA_CONTROL_TSF		0x00200000 /* Transmit  Store and Forward */
+#define DMA_CONTROL_FTF		0x00100000 /* Flush transmit FIFO */
+
+enum ttc_control {
+	DMA_CONTROL_TTC_64 = 0x00000000,
+	DMA_CONTROL_TTC_128 = 0x00004000,
+	DMA_CONTROL_TTC_192 = 0x00008000,
+	DMA_CONTROL_TTC_256 = 0x0000c000,
+	DMA_CONTROL_TTC_40 = 0x00010000,
+	DMA_CONTROL_TTC_32 = 0x00014000,
+	DMA_CONTROL_TTC_24 = 0x00018000,
+	DMA_CONTROL_TTC_16 = 0x0001c000,
+};
+#define DMA_CONTROL_TC_TX_MASK	0xfffe3fff
+
+#define DMA_CONTROL_EFC		0x00000100
+#define DMA_CONTROL_FEF		0x00000080
+#define DMA_CONTROL_FUF		0x00000040
+
+enum rtc_control {
+	DMA_CONTROL_RTC_64 = 0x00000000,
+	DMA_CONTROL_RTC_32 = 0x00000008,
+	DMA_CONTROL_RTC_96 = 0x00000010,
+	DMA_CONTROL_RTC_128 = 0x00000018,
+};
+#define DMA_CONTROL_TC_RX_MASK	0xffffffe7
+
+#define DMA_CONTROL_OSF	0x00000004	/* Operate on second frame */
+
+/* MMC registers offset */
+#define GMAC_MMC_CTRL      0x100
+#define GMAC_MMC_RX_INTR   0x104
+#define GMAC_MMC_TX_INTR   0x108
+#define GMAC_MMC_RX_CSUM_OFFLOAD   0x208
diff --git a/drivers/net/stmmac/mac100.c b/drivers/net/stmmac/mac100.c
new file mode 100644
index 000000000000..625171b6062b
--- /dev/null
+++ b/drivers/net/stmmac/mac100.c
@@ -0,0 +1,517 @@
+/*******************************************************************************
+  This is the driver for the MAC 10/100 on-chip Ethernet controller
+  currently tested on all the ST boards based on STb7109 and stx7200 SoCs.
+
+  DWC Ether MAC 10/100 Universal version 4.0 has been used for developing
+  this code.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "common.h"
+#include "mac100.h"
+
+#undef MAC100_DEBUG
+/*#define MAC100_DEBUG*/
+#ifdef MAC100_DEBUG
+#define DBG(fmt, args...)  printk(fmt, ## args)
+#else
+#define DBG(fmt, args...)  do { } while (0)
+#endif
+
+static void mac100_core_init(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + MAC_CONTROL);
+
+	writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL);
+
+#ifdef STMMAC_VLAN_TAG_USED
+	writel(ETH_P_8021Q, ioaddr + MAC_VLAN1);
+#endif
+	return;
+}
+
+static void mac100_dump_mac_regs(unsigned long ioaddr)
+{
+	pr_info("\t----------------------------------------------\n"
+	       "\t  MAC100 CSR (base addr = 0x%8x)\n"
+	       "\t----------------------------------------------\n",
+	       (unsigned int)ioaddr);
+	pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL,
+	       readl(ioaddr + MAC_CONTROL));
+	pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH,
+	       readl(ioaddr + MAC_ADDR_HIGH));
+	pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW,
+	       readl(ioaddr + MAC_ADDR_LOW));
+	pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n",
+			MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH));
+	pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n",
+			MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW));
+	pr_info("\tflow control (offset 0x%x): 0x%08x\n",
+		MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL));
+	pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1,
+	       readl(ioaddr + MAC_VLAN1));
+	pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2,
+	       readl(ioaddr + MAC_VLAN2));
+	pr_info("\n\tMAC management counter registers\n");
+	pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n",
+	       MMC_CONTROL, readl(ioaddr + MMC_CONTROL));
+	pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n",
+	       MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR));
+	pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n",
+	       MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR));
+	pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n",
+	       MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK));
+	pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n",
+	       MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK));
+	return;
+}
+
+static int mac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx,
+			   u32 dma_rx)
+{
+	u32 value = readl(ioaddr + DMA_BUS_MODE);
+	/* DMA SW reset */
+	value |= DMA_BUS_MODE_SFT_RESET;
+	writel(value, ioaddr + DMA_BUS_MODE);
+	do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+	/* Enable Application Access by writing to DMA CSR0 */
+	writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
+	       ioaddr + DMA_BUS_MODE);
+
+	/* Mask interrupts by writing to CSR7 */
+	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+
+	/* The base address of the RX/TX descriptor lists must be written into
+	 * DMA CSR3 and CSR4, respectively. */
+	writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
+	writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+
+	return 0;
+}
+
+/* Store and Forward capability is not used at all..
+ * The transmit threshold can be programmed by
+ * setting the TTC bits in the DMA control register.*/
+static void mac100_dma_operation_mode(unsigned long ioaddr, int txmode,
+				      int rxmode)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+	if (txmode <= 32)
+		csr6 |= DMA_CONTROL_TTC_32;
+	else if (txmode <= 64)
+		csr6 |= DMA_CONTROL_TTC_64;
+	else
+		csr6 |= DMA_CONTROL_TTC_128;
+
+	writel(csr6, ioaddr + DMA_CONTROL);
+
+	return;
+}
+
+static void mac100_dump_dma_regs(unsigned long ioaddr)
+{
+	int i;
+
+	DBG(KERN_DEBUG "MAC100 DMA CSR \n");
+	for (i = 0; i < 9; i++)
+		pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i,
+		       (DMA_BUS_MODE + i * 4),
+		       readl(ioaddr + DMA_BUS_MODE + i * 4));
+	DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n",
+	    DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR));
+	DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n",
+	    DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR));
+	return;
+}
+
+/* DMA controller has two counters to track the number of
+   the receive missed frames. */
+static void mac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
+				     unsigned long ioaddr)
+{
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+	u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR);
+
+	if (unlikely(csr8)) {
+		if (csr8 & DMA_MISSED_FRAME_OVE) {
+			stats->rx_over_errors += 0x800;
+			x->rx_overflow_cntr += 0x800;
+		} else {
+			unsigned int ove_cntr;
+			ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17);
+			stats->rx_over_errors += ove_cntr;
+			x->rx_overflow_cntr += ove_cntr;
+		}
+
+		if (csr8 & DMA_MISSED_FRAME_OVE_M) {
+			stats->rx_missed_errors += 0xffff;
+			x->rx_missed_cntr += 0xffff;
+		} else {
+			unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR);
+			stats->rx_missed_errors += miss_f;
+			x->rx_missed_cntr += miss_f;
+		}
+	}
+	return;
+}
+
+static int mac100_get_tx_frame_status(void *data, struct stmmac_extra_stats *x,
+				      struct dma_desc *p, unsigned long ioaddr)
+{
+	int ret = 0;
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+
+	if (unlikely(p->des01.tx.error_summary)) {
+		if (unlikely(p->des01.tx.underflow_error)) {
+			x->tx_underflow++;
+			stats->tx_fifo_errors++;
+		}
+		if (unlikely(p->des01.tx.no_carrier)) {
+			x->tx_carrier++;
+			stats->tx_carrier_errors++;
+		}
+		if (unlikely(p->des01.tx.loss_carrier)) {
+			x->tx_losscarrier++;
+			stats->tx_carrier_errors++;
+		}
+		if (unlikely((p->des01.tx.excessive_deferral) ||
+			     (p->des01.tx.excessive_collisions) ||
+			     (p->des01.tx.late_collision)))
+			stats->collisions += p->des01.tx.collision_count;
+		ret = -1;
+	}
+	if (unlikely(p->des01.tx.heartbeat_fail)) {
+		x->tx_heartbeat++;
+		stats->tx_heartbeat_errors++;
+		ret = -1;
+	}
+	if (unlikely(p->des01.tx.deferred))
+		x->tx_deferred++;
+
+	return ret;
+}
+
+static int mac100_get_tx_len(struct dma_desc *p)
+{
+	return p->des01.tx.buffer1_size;
+}
+
+/* This function verifies if each incoming frame has some errors
+ * and, if required, updates the multicast statistics.
+ * In case of success, it returns csum_none becasue the device
+ * is not able to compute the csum in HW. */
+static int mac100_get_rx_frame_status(void *data, struct stmmac_extra_stats *x,
+				      struct dma_desc *p)
+{
+	int ret = csum_none;
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+
+	if (unlikely(p->des01.rx.last_descriptor == 0)) {
+		pr_warning("mac100 Error: Oversized Ethernet "
+			   "frame spanned multiple buffers\n");
+		stats->rx_length_errors++;
+		return discard_frame;
+	}
+
+	if (unlikely(p->des01.rx.error_summary)) {
+		if (unlikely(p->des01.rx.descriptor_error))
+			x->rx_desc++;
+		if (unlikely(p->des01.rx.partial_frame_error))
+			x->rx_partial++;
+		if (unlikely(p->des01.rx.run_frame))
+			x->rx_runt++;
+		if (unlikely(p->des01.rx.frame_too_long))
+			x->rx_toolong++;
+		if (unlikely(p->des01.rx.collision)) {
+			x->rx_collision++;
+			stats->collisions++;
+		}
+		if (unlikely(p->des01.rx.crc_error)) {
+			x->rx_crc++;
+			stats->rx_crc_errors++;
+		}
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.rx.dribbling))
+		ret = discard_frame;
+
+	if (unlikely(p->des01.rx.length_error)) {
+		x->rx_lenght++;
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.rx.mii_error)) {
+		x->rx_mii++;
+		ret = discard_frame;
+	}
+	if (p->des01.rx.multicast_frame) {
+		x->rx_multicast++;
+		stats->multicast++;
+	}
+	return ret;
+}
+
+static void mac100_irq_status(unsigned long ioaddr)
+{
+	return;
+}
+
+static void mac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
+			  unsigned int reg_n)
+{
+	stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
+}
+
+static void mac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
+			  unsigned int reg_n)
+{
+	stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
+}
+
+static void mac100_set_filter(struct net_device *dev)
+{
+	unsigned long ioaddr = dev->base_addr;
+	u32 value = readl(ioaddr + MAC_CONTROL);
+
+	if (dev->flags & IFF_PROMISC) {
+		value |= MAC_CONTROL_PR;
+		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO |
+			   MAC_CONTROL_HP);
+	} else if ((dev->mc_count > HASH_TABLE_SIZE)
+		   || (dev->flags & IFF_ALLMULTI)) {
+		value |= MAC_CONTROL_PM;
+		value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO);
+		writel(0xffffffff, ioaddr + MAC_HASH_HIGH);
+		writel(0xffffffff, ioaddr + MAC_HASH_LOW);
+	} else if (dev->mc_count == 0) {	/* no multicast */
+		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF |
+			   MAC_CONTROL_HO | MAC_CONTROL_HP);
+	} else {
+		int i;
+		u32 mc_filter[2];
+		struct dev_mc_list *mclist;
+
+		/* Perfect filter mode for physical address and Hash
+		   filter for multicast */
+		value |= MAC_CONTROL_HP;
+		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF
+			   | MAC_CONTROL_HO);
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list;
+		     mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+			/* The upper 6 bits of the calculated CRC are used to
+			 * index the contens of the hash table */
+			int bit_nr =
+			    ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+			/* The most significant bit determines the register to
+			 * use (H/L) while the other 5 bits determine the bit
+			 * within the register. */
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+		}
+		writel(mc_filter[0], ioaddr + MAC_HASH_LOW);
+		writel(mc_filter[1], ioaddr + MAC_HASH_HIGH);
+	}
+
+	writel(value, ioaddr + MAC_CONTROL);
+
+	DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: "
+	    "HI 0x%08x, LO 0x%08x\n",
+	    __func__, readl(ioaddr + MAC_CONTROL),
+	    readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW));
+	return;
+}
+
+static void mac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
+			     unsigned int fc, unsigned int pause_time)
+{
+	unsigned int flow = MAC_FLOW_CTRL_ENABLE;
+
+	if (duplex)
+		flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT);
+	writel(flow, ioaddr + MAC_FLOW_CTRL);
+
+	return;
+}
+
+/* No PMT module supported in our SoC  for the Ethernet Controller. */
+static void mac100_pmt(unsigned long ioaddr, unsigned long mode)
+{
+	return;
+}
+
+static void mac100_init_rx_desc(struct dma_desc *p, unsigned int ring_size,
+				int disable_rx_ic)
+{
+	int i;
+	for (i = 0; i < ring_size; i++) {
+		p->des01.rx.own = 1;
+		p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1;
+		if (i == ring_size - 1)
+			p->des01.rx.end_ring = 1;
+		if (disable_rx_ic)
+			p->des01.rx.disable_ic = 1;
+		p++;
+	}
+	return;
+}
+
+static void mac100_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+	int i;
+	for (i = 0; i < ring_size; i++) {
+		p->des01.tx.own = 0;
+		if (i == ring_size - 1)
+			p->des01.tx.end_ring = 1;
+		p++;
+	}
+	return;
+}
+
+static int mac100_get_tx_owner(struct dma_desc *p)
+{
+	return p->des01.tx.own;
+}
+
+static int mac100_get_rx_owner(struct dma_desc *p)
+{
+	return p->des01.rx.own;
+}
+
+static void mac100_set_tx_owner(struct dma_desc *p)
+{
+	p->des01.tx.own = 1;
+}
+
+static void mac100_set_rx_owner(struct dma_desc *p)
+{
+	p->des01.rx.own = 1;
+}
+
+static int mac100_get_tx_ls(struct dma_desc *p)
+{
+	return p->des01.tx.last_segment;
+}
+
+static void mac100_release_tx_desc(struct dma_desc *p)
+{
+	int ter = p->des01.tx.end_ring;
+
+	/* clean field used within the xmit */
+	p->des01.tx.first_segment = 0;
+	p->des01.tx.last_segment = 0;
+	p->des01.tx.buffer1_size = 0;
+
+	/* clean status reported */
+	p->des01.tx.error_summary = 0;
+	p->des01.tx.underflow_error = 0;
+	p->des01.tx.no_carrier = 0;
+	p->des01.tx.loss_carrier = 0;
+	p->des01.tx.excessive_deferral = 0;
+	p->des01.tx.excessive_collisions = 0;
+	p->des01.tx.late_collision = 0;
+	p->des01.tx.heartbeat_fail = 0;
+	p->des01.tx.deferred = 0;
+
+	/* set termination field */
+	p->des01.tx.end_ring = ter;
+
+	return;
+}
+
+static void mac100_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
+				   int csum_flag)
+{
+	p->des01.tx.first_segment = is_fs;
+	p->des01.tx.buffer1_size = len;
+}
+
+static void mac100_clear_tx_ic(struct dma_desc *p)
+{
+	p->des01.tx.interrupt = 0;
+}
+
+static void mac100_close_tx_desc(struct dma_desc *p)
+{
+	p->des01.tx.last_segment = 1;
+	p->des01.tx.interrupt = 1;
+}
+
+static int mac100_get_rx_frame_len(struct dma_desc *p)
+{
+	return p->des01.rx.frame_length;
+}
+
+struct stmmac_ops mac100_driver = {
+	.core_init = mac100_core_init,
+	.dump_mac_regs = mac100_dump_mac_regs,
+	.dma_init = mac100_dma_init,
+	.dump_dma_regs = mac100_dump_dma_regs,
+	.dma_mode = mac100_dma_operation_mode,
+	.dma_diagnostic_fr = mac100_dma_diagnostic_fr,
+	.tx_status = mac100_get_tx_frame_status,
+	.rx_status = mac100_get_rx_frame_status,
+	.get_tx_len = mac100_get_tx_len,
+	.set_filter = mac100_set_filter,
+	.flow_ctrl = mac100_flow_ctrl,
+	.pmt = mac100_pmt,
+	.init_rx_desc = mac100_init_rx_desc,
+	.init_tx_desc = mac100_init_tx_desc,
+	.get_tx_owner = mac100_get_tx_owner,
+	.get_rx_owner = mac100_get_rx_owner,
+	.release_tx_desc = mac100_release_tx_desc,
+	.prepare_tx_desc = mac100_prepare_tx_desc,
+	.clear_tx_ic = mac100_clear_tx_ic,
+	.close_tx_desc = mac100_close_tx_desc,
+	.get_tx_ls = mac100_get_tx_ls,
+	.set_tx_owner = mac100_set_tx_owner,
+	.set_rx_owner = mac100_set_rx_owner,
+	.get_rx_frame_len = mac100_get_rx_frame_len,
+	.host_irq_status = mac100_irq_status,
+	.set_umac_addr = mac100_set_umac_addr,
+	.get_umac_addr = mac100_get_umac_addr,
+};
+
+struct mac_device_info *mac100_setup(unsigned long ioaddr)
+{
+	struct mac_device_info *mac;
+
+	mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
+
+	pr_info("\tMAC 10/100\n");
+
+	mac->ops = &mac100_driver;
+	mac->hw.pmt = PMT_NOT_SUPPORTED;
+	mac->hw.link.port = MAC_CONTROL_PS;
+	mac->hw.link.duplex = MAC_CONTROL_F;
+	mac->hw.link.speed = 0;
+	mac->hw.mii.addr = MAC_MII_ADDR;
+	mac->hw.mii.data = MAC_MII_DATA;
+
+	return mac;
+}
diff --git a/drivers/net/stmmac/mac100.h b/drivers/net/stmmac/mac100.h
new file mode 100644
index 000000000000..0f8f110d004a
--- /dev/null
+++ b/drivers/net/stmmac/mac100.h
@@ -0,0 +1,116 @@
+/*******************************************************************************
+  MAC 10/100 Header File
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+/*----------------------------------------------------------------------------
+ *	 			MAC BLOCK defines
+ *---------------------------------------------------------------------------*/
+/* MAC CSR offset */
+#define MAC_CONTROL	0x00000000	/* MAC Control */
+#define MAC_ADDR_HIGH	0x00000004	/* MAC Address High */
+#define MAC_ADDR_LOW	0x00000008	/* MAC Address Low */
+#define MAC_HASH_HIGH	0x0000000c	/* Multicast Hash Table High */
+#define MAC_HASH_LOW	0x00000010	/* Multicast Hash Table Low */
+#define MAC_MII_ADDR	0x00000014	/* MII Address */
+#define MAC_MII_DATA	0x00000018	/* MII Data */
+#define MAC_FLOW_CTRL	0x0000001c	/* Flow Control */
+#define MAC_VLAN1	0x00000020	/* VLAN1 Tag */
+#define MAC_VLAN2	0x00000024	/* VLAN2 Tag */
+
+/* MAC CTRL defines */
+#define MAC_CONTROL_RA	0x80000000	/* Receive All Mode */
+#define MAC_CONTROL_BLE	0x40000000	/* Endian Mode */
+#define MAC_CONTROL_HBD	0x10000000	/* Heartbeat Disable */
+#define MAC_CONTROL_PS	0x08000000	/* Port Select */
+#define MAC_CONTROL_DRO	0x00800000	/* Disable Receive Own */
+#define MAC_CONTROL_EXT_LOOPBACK 0x00400000	/* Reserved (ext loopback?) */
+#define MAC_CONTROL_OM	0x00200000	/* Loopback Operating Mode */
+#define MAC_CONTROL_F	0x00100000	/* Full Duplex Mode */
+#define MAC_CONTROL_PM	0x00080000	/* Pass All Multicast */
+#define MAC_CONTROL_PR	0x00040000	/* Promiscuous Mode */
+#define MAC_CONTROL_IF	0x00020000	/* Inverse Filtering */
+#define MAC_CONTROL_PB	0x00010000	/* Pass Bad Frames */
+#define MAC_CONTROL_HO	0x00008000	/* Hash Only Filtering Mode */
+#define MAC_CONTROL_HP	0x00002000	/* Hash/Perfect Filtering Mode */
+#define MAC_CONTROL_LCC	0x00001000	/* Late Collision Control */
+#define MAC_CONTROL_DBF	0x00000800	/* Disable Broadcast Frames */
+#define MAC_CONTROL_DRTY	0x00000400	/* Disable Retry */
+#define MAC_CONTROL_ASTP	0x00000100	/* Automatic Pad Stripping */
+#define MAC_CONTROL_BOLMT_10	0x00000000	/* Back Off Limit 10 */
+#define MAC_CONTROL_BOLMT_8	0x00000040	/* Back Off Limit 8 */
+#define MAC_CONTROL_BOLMT_4	0x00000080	/* Back Off Limit 4 */
+#define MAC_CONTROL_BOLMT_1	0x000000c0	/* Back Off Limit 1 */
+#define MAC_CONTROL_DC		0x00000020	/* Deferral Check */
+#define MAC_CONTROL_TE		0x00000008	/* Transmitter Enable */
+#define MAC_CONTROL_RE		0x00000004	/* Receiver Enable */
+
+#define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP)
+
+/* MAC FLOW CTRL defines */
+#define MAC_FLOW_CTRL_PT_MASK	0xffff0000	/* Pause Time Mask */
+#define MAC_FLOW_CTRL_PT_SHIFT	16
+#define MAC_FLOW_CTRL_PASS	0x00000004	/* Pass Control Frames */
+#define MAC_FLOW_CTRL_ENABLE	0x00000002	/* Flow Control Enable */
+#define MAC_FLOW_CTRL_PAUSE	0x00000001	/* Flow Control Busy ... */
+
+/* MII ADDR  defines */
+#define MAC_MII_ADDR_WRITE	0x00000002	/* MII Write */
+#define MAC_MII_ADDR_BUSY	0x00000001	/* MII Busy */
+
+/*----------------------------------------------------------------------------
+ * 				DMA BLOCK defines
+ *---------------------------------------------------------------------------*/
+
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_DBO	0x00100000	/* Descriptor Byte Ordering */
+#define DMA_BUS_MODE_BLE	0x00000080	/* Big Endian/Little Endian */
+#define DMA_BUS_MODE_PBL_MASK	0x00003f00	/* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT	8
+#define DMA_BUS_MODE_DSL_MASK	0x0000007c	/* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT	2	/*   (in DWORDS)      */
+#define DMA_BUS_MODE_BAR_BUS	0x00000002	/* Bar-Bus Arbitration */
+#define DMA_BUS_MODE_SFT_RESET	0x00000001	/* Software Reset */
+#define DMA_BUS_MODE_DEFAULT	0x00000000
+
+/* DMA Control register defines */
+#define DMA_CONTROL_SF		0x00200000	/* Store And Forward */
+
+/* Transmit Threshold Control */
+enum ttc_control {
+	DMA_CONTROL_TTC_DEFAULT = 0x00000000,	/* Threshold is 32 DWORDS */
+	DMA_CONTROL_TTC_64 = 0x00004000,	/* Threshold is 64 DWORDS */
+	DMA_CONTROL_TTC_128 = 0x00008000,	/* Threshold is 128 DWORDS */
+	DMA_CONTROL_TTC_256 = 0x0000c000,	/* Threshold is 256 DWORDS */
+	DMA_CONTROL_TTC_18 = 0x00400000,	/* Threshold is 18 DWORDS */
+	DMA_CONTROL_TTC_24 = 0x00404000,	/* Threshold is 24 DWORDS */
+	DMA_CONTROL_TTC_32 = 0x00408000,	/* Threshold is 32 DWORDS */
+	DMA_CONTROL_TTC_40 = 0x0040c000,	/* Threshold is 40 DWORDS */
+	DMA_CONTROL_SE = 0x00000008,	/* Stop On Empty */
+	DMA_CONTROL_OSF = 0x00000004,	/* Operate On 2nd Frame */
+};
+
+/* STMAC110 DMA Missed Frame Counter register defines */
+#define DMA_MISSED_FRAME_OVE	0x10000000	/* FIFO Overflow Overflow */
+#define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000	/* Overflow Frame Counter */
+#define DMA_MISSED_FRAME_OVE_M	0x00010000	/* Missed Frame Overflow */
+#define DMA_MISSED_FRAME_M_CNTR	0x0000ffff	/* Missed Frame Couinter */
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
new file mode 100644
index 000000000000..6d2eae3040e5
--- /dev/null
+++ b/drivers/net/stmmac/stmmac.h
@@ -0,0 +1,98 @@
+/*******************************************************************************
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#define DRV_MODULE_VERSION	"Oct_09"
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define STMMAC_VLAN_TAG_USED
+#include <linux/if_vlan.h>
+#endif
+
+#include "common.h"
+#ifdef CONFIG_STMMAC_TIMER
+#include "stmmac_timer.h"
+#endif
+
+struct stmmac_priv {
+	/* Frequently used values are kept adjacent for cache effect */
+	struct dma_desc *dma_tx ____cacheline_aligned;
+	dma_addr_t dma_tx_phy;
+	struct sk_buff **tx_skbuff;
+	unsigned int cur_tx;
+	unsigned int dirty_tx;
+	unsigned int dma_tx_size;
+	int tx_coe;
+	int tx_coalesce;
+
+	struct dma_desc *dma_rx ;
+	unsigned int cur_rx;
+	unsigned int dirty_rx;
+	struct sk_buff **rx_skbuff;
+	dma_addr_t *rx_skbuff_dma;
+	struct sk_buff_head rx_recycle;
+
+	struct net_device *dev;
+	int is_gmac;
+	dma_addr_t dma_rx_phy;
+	unsigned int dma_rx_size;
+	int rx_csum;
+	unsigned int dma_buf_sz;
+	struct device *device;
+	struct mac_device_info *mac_type;
+
+	struct stmmac_extra_stats xstats;
+	struct napi_struct napi;
+
+	phy_interface_t phy_interface;
+	int pbl;
+	int bus_id;
+	int phy_addr;
+	int phy_mask;
+	int (*phy_reset) (void *priv);
+	void (*fix_mac_speed) (void *priv, unsigned int speed);
+	void *bsp_priv;
+
+	int phy_irq;
+	struct phy_device *phydev;
+	int oldlink;
+	int speed;
+	int oldduplex;
+	unsigned int flow_ctrl;
+	unsigned int pause;
+	struct mii_bus *mii;
+
+	u32 msg_enable;
+	spinlock_t lock;
+	int wolopts;
+	int wolenabled;
+	int shutdown;
+#ifdef CONFIG_STMMAC_TIMER
+	struct stmmac_timer *tm;
+#endif
+#ifdef STMMAC_VLAN_TAG_USED
+	struct vlan_group *vlgrp;
+#endif
+};
+
+extern int stmmac_mdio_unregister(struct net_device *ndev);
+extern int stmmac_mdio_register(struct net_device *ndev);
+extern void stmmac_set_ethtool_ops(struct net_device *netdev);
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
new file mode 100644
index 000000000000..694ebe6a0758
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -0,0 +1,395 @@
+/*******************************************************************************
+  STMMAC Ethtool support
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "stmmac.h"
+
+#define REG_SPACE_SIZE	0x1054
+#define MAC100_ETHTOOL_NAME	"st_mac100"
+#define GMAC_ETHTOOL_NAME	"st_gmac"
+
+struct stmmac_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define STMMAC_STAT(m)	\
+	{ #m, FIELD_SIZEOF(struct stmmac_extra_stats, m),	\
+	offsetof(struct stmmac_priv, xstats.m)}
+
+static const struct  stmmac_stats stmmac_gstrings_stats[] = {
+	STMMAC_STAT(tx_underflow),
+	STMMAC_STAT(tx_carrier),
+	STMMAC_STAT(tx_losscarrier),
+	STMMAC_STAT(tx_heartbeat),
+	STMMAC_STAT(tx_deferred),
+	STMMAC_STAT(tx_vlan),
+	STMMAC_STAT(rx_vlan),
+	STMMAC_STAT(tx_jabber),
+	STMMAC_STAT(tx_frame_flushed),
+	STMMAC_STAT(tx_payload_error),
+	STMMAC_STAT(tx_ip_header_error),
+	STMMAC_STAT(rx_desc),
+	STMMAC_STAT(rx_partial),
+	STMMAC_STAT(rx_runt),
+	STMMAC_STAT(rx_toolong),
+	STMMAC_STAT(rx_collision),
+	STMMAC_STAT(rx_crc),
+	STMMAC_STAT(rx_lenght),
+	STMMAC_STAT(rx_mii),
+	STMMAC_STAT(rx_multicast),
+	STMMAC_STAT(rx_gmac_overflow),
+	STMMAC_STAT(rx_watchdog),
+	STMMAC_STAT(da_rx_filter_fail),
+	STMMAC_STAT(sa_rx_filter_fail),
+	STMMAC_STAT(rx_missed_cntr),
+	STMMAC_STAT(rx_overflow_cntr),
+	STMMAC_STAT(tx_undeflow_irq),
+	STMMAC_STAT(tx_process_stopped_irq),
+	STMMAC_STAT(tx_jabber_irq),
+	STMMAC_STAT(rx_overflow_irq),
+	STMMAC_STAT(rx_buf_unav_irq),
+	STMMAC_STAT(rx_process_stopped_irq),
+	STMMAC_STAT(rx_watchdog_irq),
+	STMMAC_STAT(tx_early_irq),
+	STMMAC_STAT(fatal_bus_error_irq),
+	STMMAC_STAT(threshold),
+	STMMAC_STAT(tx_pkt_n),
+	STMMAC_STAT(rx_pkt_n),
+	STMMAC_STAT(poll_n),
+	STMMAC_STAT(sched_timer_n),
+	STMMAC_STAT(normal_irq_n),
+};
+#define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats)
+
+void stmmac_ethtool_getdrvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if (!priv->is_gmac)
+		strcpy(info->driver, MAC100_ETHTOOL_NAME);
+	else
+		strcpy(info->driver, GMAC_ETHTOOL_NAME);
+
+	strcpy(info->version, DRV_MODULE_VERSION);
+	info->fw_version[0] = '\0';
+	info->n_stats = STMMAC_STATS_LEN;
+	return;
+}
+
+int stmmac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct phy_device *phy = priv->phydev;
+	int rc;
+	if (phy == NULL) {
+		pr_err("%s: %s: PHY is not registered\n",
+		       __func__, dev->name);
+		return -ENODEV;
+	}
+	if (!netif_running(dev)) {
+		pr_err("%s: interface is disabled: we cannot track "
+		"link speed / duplex setting\n", dev->name);
+		return -EBUSY;
+	}
+	cmd->transceiver = XCVR_INTERNAL;
+	spin_lock_irq(&priv->lock);
+	rc = phy_ethtool_gset(phy, cmd);
+	spin_unlock_irq(&priv->lock);
+	return rc;
+}
+
+int stmmac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct phy_device *phy = priv->phydev;
+	int rc;
+
+	spin_lock(&priv->lock);
+	rc = phy_ethtool_sset(phy, cmd);
+	spin_unlock(&priv->lock);
+
+	return rc;
+}
+
+u32 stmmac_ethtool_getmsglevel(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	return priv->msg_enable;
+}
+
+void stmmac_ethtool_setmsglevel(struct net_device *dev, u32 level)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	priv->msg_enable = level;
+
+}
+
+int stmmac_check_if_running(struct net_device *dev)
+{
+	if (!netif_running(dev))
+		return -EBUSY;
+	return 0;
+}
+
+int stmmac_ethtool_get_regs_len(struct net_device *dev)
+{
+	return REG_SPACE_SIZE;
+}
+
+void stmmac_ethtool_gregs(struct net_device *dev,
+			  struct ethtool_regs *regs, void *space)
+{
+	int i;
+	u32 *reg_space = (u32 *) space;
+
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	memset(reg_space, 0x0, REG_SPACE_SIZE);
+
+	if (!priv->is_gmac) {
+		/* MAC registers */
+		for (i = 0; i < 12; i++)
+			reg_space[i] = readl(dev->base_addr + (i * 4));
+		/* DMA registers */
+		for (i = 0; i < 9; i++)
+			reg_space[i + 12] =
+			    readl(dev->base_addr + (DMA_BUS_MODE + (i * 4)));
+		reg_space[22] = readl(dev->base_addr + DMA_CUR_TX_BUF_ADDR);
+		reg_space[23] = readl(dev->base_addr + DMA_CUR_RX_BUF_ADDR);
+	} else {
+		/* MAC registers */
+		for (i = 0; i < 55; i++)
+			reg_space[i] = readl(dev->base_addr + (i * 4));
+		/* DMA registers */
+		for (i = 0; i < 22; i++)
+			reg_space[i + 55] =
+			    readl(dev->base_addr + (DMA_BUS_MODE + (i * 4)));
+	}
+
+	return;
+}
+
+int stmmac_ethtool_set_tx_csum(struct net_device *netdev, u32 data)
+{
+	if (data)
+		netdev->features |= NETIF_F_HW_CSUM;
+	else
+		netdev->features &= ~NETIF_F_HW_CSUM;
+
+	return 0;
+}
+
+u32 stmmac_ethtool_get_rx_csum(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	return priv->rx_csum;
+}
+
+static void
+stmmac_get_pauseparam(struct net_device *netdev,
+		      struct ethtool_pauseparam *pause)
+{
+	struct stmmac_priv *priv = netdev_priv(netdev);
+
+	spin_lock(&priv->lock);
+
+	pause->rx_pause = 0;
+	pause->tx_pause = 0;
+	pause->autoneg = priv->phydev->autoneg;
+
+	if (priv->flow_ctrl & FLOW_RX)
+		pause->rx_pause = 1;
+	if (priv->flow_ctrl & FLOW_TX)
+		pause->tx_pause = 1;
+
+	spin_unlock(&priv->lock);
+	return;
+}
+
+static int
+stmmac_set_pauseparam(struct net_device *netdev,
+		      struct ethtool_pauseparam *pause)
+{
+	struct stmmac_priv *priv = netdev_priv(netdev);
+	struct phy_device *phy = priv->phydev;
+	int new_pause = FLOW_OFF;
+	int ret = 0;
+
+	spin_lock(&priv->lock);
+
+	if (pause->rx_pause)
+		new_pause |= FLOW_RX;
+	if (pause->tx_pause)
+		new_pause |= FLOW_TX;
+
+	priv->flow_ctrl = new_pause;
+
+	if (phy->autoneg) {
+		if (netif_running(netdev)) {
+			struct ethtool_cmd cmd;
+			/* auto-negotiation automatically restarted */
+			cmd.cmd = ETHTOOL_NWAY_RST;
+			cmd.supported = phy->supported;
+			cmd.advertising = phy->advertising;
+			cmd.autoneg = phy->autoneg;
+			cmd.speed = phy->speed;
+			cmd.duplex = phy->duplex;
+			cmd.phy_address = phy->addr;
+			ret = phy_ethtool_sset(phy, &cmd);
+		}
+	} else {
+		unsigned long ioaddr = netdev->base_addr;
+		priv->mac_type->ops->flow_ctrl(ioaddr, phy->duplex,
+					       priv->flow_ctrl, priv->pause);
+	}
+	spin_unlock(&priv->lock);
+	return ret;
+}
+
+static void stmmac_get_ethtool_stats(struct net_device *dev,
+				 struct ethtool_stats *dummy, u64 *data)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+	int i;
+
+	/* Update HW stats if supported */
+	priv->mac_type->ops->dma_diagnostic_fr(&dev->stats, &priv->xstats,
+					       ioaddr);
+
+	for (i = 0; i < STMMAC_STATS_LEN; i++) {
+		char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset;
+		data[i] = (stmmac_gstrings_stats[i].sizeof_stat ==
+		sizeof(u64)) ? (*(u64 *)p) : (*(u32 *)p);
+	}
+
+	return;
+}
+
+static int stmmac_get_sset_count(struct net_device *netdev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return STMMAC_STATS_LEN;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void stmmac_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	int i;
+	u8 *p = data;
+
+	switch (stringset) {
+	case ETH_SS_STATS:
+		for (i = 0; i < STMMAC_STATS_LEN; i++) {
+			memcpy(p, stmmac_gstrings_stats[i].stat_string,
+				ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+	return;
+}
+
+/* Currently only support WOL through Magic packet. */
+static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	spin_lock_irq(&priv->lock);
+	if (priv->wolenabled == PMT_SUPPORTED) {
+		wol->supported = WAKE_MAGIC;
+		wol->wolopts = priv->wolopts;
+	}
+	spin_unlock_irq(&priv->lock);
+}
+
+static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 support = WAKE_MAGIC;
+
+	if (priv->wolenabled == PMT_NOT_SUPPORTED)
+		return -EINVAL;
+
+	if (wol->wolopts & ~support)
+		return -EINVAL;
+
+	if (wol->wolopts == 0)
+		device_set_wakeup_enable(priv->device, 0);
+	else
+		device_set_wakeup_enable(priv->device, 1);
+
+	spin_lock_irq(&priv->lock);
+	priv->wolopts = wol->wolopts;
+	spin_unlock_irq(&priv->lock);
+
+	return 0;
+}
+
+static struct ethtool_ops stmmac_ethtool_ops = {
+	.begin = stmmac_check_if_running,
+	.get_drvinfo = stmmac_ethtool_getdrvinfo,
+	.get_settings = stmmac_ethtool_getsettings,
+	.set_settings = stmmac_ethtool_setsettings,
+	.get_msglevel = stmmac_ethtool_getmsglevel,
+	.set_msglevel = stmmac_ethtool_setmsglevel,
+	.get_regs = stmmac_ethtool_gregs,
+	.get_regs_len = stmmac_ethtool_get_regs_len,
+	.get_link = ethtool_op_get_link,
+	.get_rx_csum = stmmac_ethtool_get_rx_csum,
+	.get_tx_csum = ethtool_op_get_tx_csum,
+	.set_tx_csum = stmmac_ethtool_set_tx_csum,
+	.get_sg = ethtool_op_get_sg,
+	.set_sg = ethtool_op_set_sg,
+	.get_pauseparam = stmmac_get_pauseparam,
+	.set_pauseparam = stmmac_set_pauseparam,
+	.get_ethtool_stats = stmmac_get_ethtool_stats,
+	.get_strings = stmmac_get_strings,
+	.get_wol = stmmac_get_wol,
+	.set_wol = stmmac_set_wol,
+	.get_sset_count	= stmmac_get_sset_count,
+#ifdef NETIF_F_TSO
+	.get_tso = ethtool_op_get_tso,
+	.set_tso = ethtool_op_set_tso,
+#endif
+};
+
+void stmmac_set_ethtool_ops(struct net_device *netdev)
+{
+	SET_ETHTOOL_OPS(netdev, &stmmac_ethtool_ops);
+}
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
new file mode 100644
index 000000000000..c2f14dc9ba28
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -0,0 +1,2204 @@
+/*******************************************************************************
+  This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
+  ST Ethernet IPs are built around a Synopsys IP Core.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+
+  Documentation available at:
+	http://www.stlinux.com
+  Support available at:
+	https://bugzilla.stlinux.com/
+*******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/if_ether.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>
+#include <linux/stm/soc.h>
+#include "stmmac.h"
+
+#define STMMAC_RESOURCE_NAME	"stmmaceth"
+#define PHY_RESOURCE_NAME	"stmmacphy"
+
+#undef STMMAC_DEBUG
+/*#define STMMAC_DEBUG*/
+#ifdef STMMAC_DEBUG
+#define DBG(nlevel, klevel, fmt, args...) \
+		((void)(netif_msg_##nlevel(priv) && \
+		printk(KERN_##klevel fmt, ## args)))
+#else
+#define DBG(nlevel, klevel, fmt, args...) do { } while (0)
+#endif
+
+#undef STMMAC_RX_DEBUG
+/*#define STMMAC_RX_DEBUG*/
+#ifdef STMMAC_RX_DEBUG
+#define RX_DBG(fmt, args...)  printk(fmt, ## args)
+#else
+#define RX_DBG(fmt, args...)  do { } while (0)
+#endif
+
+#undef STMMAC_XMIT_DEBUG
+/*#define STMMAC_XMIT_DEBUG*/
+#ifdef STMMAC_TX_DEBUG
+#define TX_DBG(fmt, args...)  printk(fmt, ## args)
+#else
+#define TX_DBG(fmt, args...)  do { } while (0)
+#endif
+
+#define STMMAC_ALIGN(x)	L1_CACHE_ALIGN(x)
+#define JUMBO_LEN	9000
+
+/* Module parameters */
+#define TX_TIMEO 5000 /* default 5 seconds */
+static int watchdog = TX_TIMEO;
+module_param(watchdog, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds");
+
+static int debug = -1;		/* -1: default, 0: no output, 16:  all */
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)");
+
+static int phyaddr = -1;
+module_param(phyaddr, int, S_IRUGO);
+MODULE_PARM_DESC(phyaddr, "Physical device address");
+
+#define DMA_TX_SIZE 256
+static int dma_txsize = DMA_TX_SIZE;
+module_param(dma_txsize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list");
+
+#define DMA_RX_SIZE 256
+static int dma_rxsize = DMA_RX_SIZE;
+module_param(dma_rxsize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list");
+
+static int flow_ctrl = FLOW_OFF;
+module_param(flow_ctrl, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
+
+static int pause = PAUSE_TIME;
+module_param(pause, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pause, "Flow Control Pause Time");
+
+#define TC_DEFAULT 64
+static int tc = TC_DEFAULT;
+module_param(tc, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tc, "DMA threshold control value");
+
+#define RX_NO_COALESCE	1	/* Always interrupt on completion */
+#define TX_NO_COALESCE	-1	/* No moderation by default */
+
+/* Pay attention to tune this parameter; take care of both
+ * hardware capability and network stabitily/performance impact.
+ * Many tests showed that ~4ms latency seems to be good enough. */
+#ifdef CONFIG_STMMAC_TIMER
+#define DEFAULT_PERIODIC_RATE	256
+static int tmrate = DEFAULT_PERIODIC_RATE;
+module_param(tmrate, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)");
+#endif
+
+#define DMA_BUFFER_SIZE	BUF_SIZE_2KiB
+static int buf_sz = DMA_BUFFER_SIZE;
+module_param(buf_sz, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(buf_sz, "DMA buffer size");
+
+/* In case of Giga ETH, we can enable/disable the COE for the
+ * transmit HW checksum computation.
+ * Note that, if tx csum is off in HW, SG will be still supported. */
+static int tx_coe = HW_CSUM;
+module_param(tx_coe, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]");
+
+static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+				      NETIF_MSG_LINK | NETIF_MSG_IFUP |
+				      NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
+
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
+static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev);
+
+/**
+ * stmmac_verify_args - verify the driver parameters.
+ * Description: it verifies if some wrong parameter is passed to the driver.
+ * Note that wrong parameters are replaced with the default values.
+ */
+static void stmmac_verify_args(void)
+{
+	if (unlikely(watchdog < 0))
+		watchdog = TX_TIMEO;
+	if (unlikely(dma_rxsize < 0))
+		dma_rxsize = DMA_RX_SIZE;
+	if (unlikely(dma_txsize < 0))
+		dma_txsize = DMA_TX_SIZE;
+	if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB)))
+		buf_sz = DMA_BUFFER_SIZE;
+	if (unlikely(flow_ctrl > 1))
+		flow_ctrl = FLOW_AUTO;
+	else if (likely(flow_ctrl < 0))
+		flow_ctrl = FLOW_OFF;
+	if (unlikely((pause < 0) || (pause > 0xffff)))
+		pause = PAUSE_TIME;
+
+	return;
+}
+
+#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
+static void print_pkt(unsigned char *buf, int len)
+{
+	int j;
+	pr_info("len = %d byte, buf addr: 0x%p", len, buf);
+	for (j = 0; j < len; j++) {
+		if ((j % 16) == 0)
+			pr_info("\n %03x:", j);
+		pr_info(" %02x", buf[j]);
+	}
+	pr_info("\n");
+	return;
+}
+#endif
+
+/* minimum number of free TX descriptors required to wake up TX process */
+#define STMMAC_TX_THRESH(x)	(x->dma_tx_size/4)
+
+static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
+{
+	return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1;
+}
+
+/**
+ * stmmac_adjust_link
+ * @dev: net device structure
+ * Description: it adjusts the link parameters.
+ */
+static void stmmac_adjust_link(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+	unsigned long ioaddr = dev->base_addr;
+	unsigned long flags;
+	int new_state = 0;
+	unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
+
+	if (phydev == NULL)
+		return;
+
+	DBG(probe, DEBUG, "stmmac_adjust_link: called.  address %d link %d\n",
+	    phydev->addr, phydev->link);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (phydev->link) {
+		u32 ctrl = readl(ioaddr + MAC_CTRL_REG);
+
+		/* Now we make sure that we can be in full duplex mode.
+		 * If not, we operate in half-duplex mode. */
+		if (phydev->duplex != priv->oldduplex) {
+			new_state = 1;
+			if (!(phydev->duplex))
+				ctrl &= ~priv->mac_type->hw.link.duplex;
+			else
+				ctrl |= priv->mac_type->hw.link.duplex;
+			priv->oldduplex = phydev->duplex;
+		}
+		/* Flow Control operation */
+		if (phydev->pause)
+			priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex,
+						       fc, pause_time);
+
+		if (phydev->speed != priv->speed) {
+			new_state = 1;
+			switch (phydev->speed) {
+			case 1000:
+				if (likely(priv->is_gmac))
+					ctrl &= ~priv->mac_type->hw.link.port;
+				break;
+			case 100:
+			case 10:
+				if (priv->is_gmac) {
+					ctrl |= priv->mac_type->hw.link.port;
+					if (phydev->speed == SPEED_100) {
+						ctrl |=
+						    priv->mac_type->hw.link.
+						    speed;
+					} else {
+						ctrl &=
+						    ~(priv->mac_type->hw.
+						      link.speed);
+					}
+				} else {
+					ctrl &= ~priv->mac_type->hw.link.port;
+				}
+				priv->fix_mac_speed(priv->bsp_priv,
+						    phydev->speed);
+				break;
+			default:
+				if (netif_msg_link(priv))
+					pr_warning("%s: Speed (%d) is not 10"
+				       " or 100!\n", dev->name, phydev->speed);
+				break;
+			}
+
+			priv->speed = phydev->speed;
+		}
+
+		writel(ctrl, ioaddr + MAC_CTRL_REG);
+
+		if (!priv->oldlink) {
+			new_state = 1;
+			priv->oldlink = 1;
+		}
+	} else if (priv->oldlink) {
+		new_state = 1;
+		priv->oldlink = 0;
+		priv->speed = 0;
+		priv->oldduplex = -1;
+	}
+
+	if (new_state && netif_msg_link(priv))
+		phy_print_status(phydev);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
+}
+
+/**
+ * stmmac_init_phy - PHY initialization
+ * @dev: net device structure
+ * Description: it initializes the driver's PHY state, and attaches the PHY
+ * to the mac driver.
+ *  Return value:
+ *  0 on success
+ */
+static int stmmac_init_phy(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev;
+	char phy_id[BUS_ID_SIZE];	/* PHY to connect */
+	char bus_id[BUS_ID_SIZE];
+
+	priv->oldlink = 0;
+	priv->speed = 0;
+	priv->oldduplex = -1;
+
+	if (priv->phy_addr == -1) {
+		/* We don't have a PHY, so do nothing */
+		return 0;
+	}
+
+	snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+	snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr);
+	pr_debug("stmmac_init_phy:  trying to attach to %s\n", phy_id);
+
+	phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0,
+			priv->phy_interface);
+
+	if (IS_ERR(phydev)) {
+		pr_err("%s: Could not attach to PHY\n", dev->name);
+		return PTR_ERR(phydev);
+	}
+
+	/*
+	 * Broken HW is sometimes missing the pull-up resistor on the
+	 * MDIO line, which results in reads to non-existent devices returning
+	 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
+	 * device as well.
+	 * Note: phydev->phy_id is the result of reading the UID PHY registers.
+	 */
+	if (phydev->phy_id == 0) {
+		phy_disconnect(phydev);
+		return -ENODEV;
+	}
+	pr_debug("stmmac_init_phy:  %s: attached to PHY (UID 0x%x)"
+	       " Link = %d\n", dev->name, phydev->phy_id, phydev->link);
+
+	priv->phydev = phydev;
+
+	return 0;
+}
+
+static inline void stmmac_mac_enable_rx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + MAC_CTRL_REG);
+	value |= MAC_RNABLE_RX;
+	/* Set the RE (receive enable bit into the MAC CTRL register).  */
+	writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+static inline void stmmac_mac_enable_tx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + MAC_CTRL_REG);
+	value |= MAC_ENABLE_TX;
+	/* Set the TE (transmit enable bit into the MAC CTRL register).  */
+	writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+static inline void stmmac_mac_disable_rx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + MAC_CTRL_REG);
+	value &= ~MAC_RNABLE_RX;
+	writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+static inline void stmmac_mac_disable_tx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + MAC_CTRL_REG);
+	value &= ~MAC_ENABLE_TX;
+	writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+/**
+ * display_ring
+ * @p: pointer to the ring.
+ * @size: size of the ring.
+ * Description: display all the descriptors within the ring.
+ */
+static void display_ring(struct dma_desc *p, int size)
+{
+	struct tmp_s {
+		u64 a;
+		unsigned int b;
+		unsigned int c;
+	};
+	int i;
+	for (i = 0; i < size; i++) {
+		struct tmp_s *x = (struct tmp_s *)(p + i);
+		pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x",
+		       i, (unsigned int)virt_to_phys(&p[i]),
+		       (unsigned int)(x->a), (unsigned int)((x->a) >> 32),
+		       x->b, x->c);
+		pr_info("\n");
+	}
+}
+
+/**
+ * init_dma_desc_rings - init the RX/TX descriptor rings
+ * @dev: net device structure
+ * Description:  this function initializes the DMA RX/TX descriptors
+ * and allocates the socket buffers.
+ */
+static void init_dma_desc_rings(struct net_device *dev)
+{
+	int i;
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct sk_buff *skb;
+	unsigned int txsize = priv->dma_tx_size;
+	unsigned int rxsize = priv->dma_rx_size;
+	unsigned int bfsize = priv->dma_buf_sz;
+	int buff2_needed = 0;
+	int dis_ic = 0;
+
+#ifdef CONFIG_STMMAC_TIMER
+	/* Using Timers disable interrupts on completion for the reception */
+	dis_ic = 1;
+#endif
+	/* Set the Buffer size according to the MTU;
+	 * indeed, in case of jumbo we need to bump-up the buffer sizes.
+	 */
+	if (unlikely(dev->mtu >= BUF_SIZE_8KiB))
+		bfsize = BUF_SIZE_16KiB;
+	else if (unlikely(dev->mtu >= BUF_SIZE_4KiB))
+		bfsize = BUF_SIZE_8KiB;
+	else if (unlikely(dev->mtu >= BUF_SIZE_2KiB))
+		bfsize = BUF_SIZE_4KiB;
+	else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE))
+		bfsize = BUF_SIZE_2KiB;
+	else
+		bfsize = DMA_BUFFER_SIZE;
+
+	/* If the MTU exceeds 8k so use the second buffer in the chain */
+	if (bfsize >= BUF_SIZE_8KiB)
+		buff2_needed = 1;
+
+	DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n",
+	    txsize, rxsize, bfsize);
+
+	priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL);
+	priv->rx_skbuff =
+	    kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL);
+	priv->dma_rx =
+	    (struct dma_desc *)dma_alloc_coherent(priv->device,
+						  rxsize *
+						  sizeof(struct dma_desc),
+						  &priv->dma_rx_phy,
+						  GFP_KERNEL);
+	priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize,
+				       GFP_KERNEL);
+	priv->dma_tx =
+	    (struct dma_desc *)dma_alloc_coherent(priv->device,
+						  txsize *
+						  sizeof(struct dma_desc),
+						  &priv->dma_tx_phy,
+						  GFP_KERNEL);
+
+	if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) {
+		pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__);
+		return;
+	}
+
+	DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, "
+	    "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n",
+	    dev->name, priv->dma_rx, priv->dma_tx,
+	    (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy);
+
+	/* RX INITIALIZATION */
+	DBG(probe, INFO, "stmmac: SKB addresses:\n"
+			 "skb\t\tskb data\tdma data\n");
+
+	for (i = 0; i < rxsize; i++) {
+		struct dma_desc *p = priv->dma_rx + i;
+
+		skb = netdev_alloc_skb_ip_align(dev, bfsize);
+		if (unlikely(skb == NULL)) {
+			pr_err("%s: Rx init fails; skb is NULL\n", __func__);
+			break;
+		}
+		priv->rx_skbuff[i] = skb;
+		priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
+						bfsize, DMA_FROM_DEVICE);
+
+		p->des2 = priv->rx_skbuff_dma[i];
+		if (unlikely(buff2_needed))
+			p->des3 = p->des2 + BUF_SIZE_8KiB;
+		DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i],
+			priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]);
+	}
+	priv->cur_rx = 0;
+	priv->dirty_rx = (unsigned int)(i - rxsize);
+	priv->dma_buf_sz = bfsize;
+	buf_sz = bfsize;
+
+	/* TX INITIALIZATION */
+	for (i = 0; i < txsize; i++) {
+		priv->tx_skbuff[i] = NULL;
+		priv->dma_tx[i].des2 = 0;
+	}
+	priv->dirty_tx = 0;
+	priv->cur_tx = 0;
+
+	/* Clear the Rx/Tx descriptors */
+	priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize, dis_ic);
+	priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize);
+
+	if (netif_msg_hw(priv)) {
+		pr_info("RX descriptor ring:\n");
+		display_ring(priv->dma_rx, rxsize);
+		pr_info("TX descriptor ring:\n");
+		display_ring(priv->dma_tx, txsize);
+	}
+	return;
+}
+
+static void dma_free_rx_skbufs(struct stmmac_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->dma_rx_size; i++) {
+		if (priv->rx_skbuff[i]) {
+			dma_unmap_single(priv->device, priv->rx_skbuff_dma[i],
+					 priv->dma_buf_sz, DMA_FROM_DEVICE);
+			dev_kfree_skb_any(priv->rx_skbuff[i]);
+		}
+		priv->rx_skbuff[i] = NULL;
+	}
+	return;
+}
+
+static void dma_free_tx_skbufs(struct stmmac_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->dma_tx_size; i++) {
+		if (priv->tx_skbuff[i] != NULL) {
+			struct dma_desc *p = priv->dma_tx + i;
+			if (p->des2)
+				dma_unmap_single(priv->device, p->des2,
+				 priv->mac_type->ops->get_tx_len(p),
+				 DMA_TO_DEVICE);
+			dev_kfree_skb_any(priv->tx_skbuff[i]);
+			priv->tx_skbuff[i] = NULL;
+		}
+	}
+	return;
+}
+
+static void free_dma_desc_resources(struct stmmac_priv *priv)
+{
+	/* Release the DMA TX/RX socket buffers */
+	dma_free_rx_skbufs(priv);
+	dma_free_tx_skbufs(priv);
+
+	/* Free the region of consistent memory previously allocated for
+	 * the DMA */
+	dma_free_coherent(priv->device,
+			  priv->dma_tx_size * sizeof(struct dma_desc),
+			  priv->dma_tx, priv->dma_tx_phy);
+	dma_free_coherent(priv->device,
+			  priv->dma_rx_size * sizeof(struct dma_desc),
+			  priv->dma_rx, priv->dma_rx_phy);
+	kfree(priv->rx_skbuff_dma);
+	kfree(priv->rx_skbuff);
+	kfree(priv->tx_skbuff);
+
+	return;
+}
+
+/**
+ * stmmac_dma_start_tx
+ * @ioaddr: device I/O address
+ * Description:  this function starts the DMA tx process.
+ */
+static void stmmac_dma_start_tx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + DMA_CONTROL);
+	value |= DMA_CONTROL_ST;
+	writel(value, ioaddr + DMA_CONTROL);
+	return;
+}
+
+static void stmmac_dma_stop_tx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + DMA_CONTROL);
+	value &= ~DMA_CONTROL_ST;
+	writel(value, ioaddr + DMA_CONTROL);
+	return;
+}
+
+/**
+ * stmmac_dma_start_rx
+ * @ioaddr: device I/O address
+ * Description:  this function starts the DMA rx process.
+ */
+static void stmmac_dma_start_rx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + DMA_CONTROL);
+	value |= DMA_CONTROL_SR;
+	writel(value, ioaddr + DMA_CONTROL);
+
+	return;
+}
+
+static void stmmac_dma_stop_rx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + DMA_CONTROL);
+	value &= ~DMA_CONTROL_SR;
+	writel(value, ioaddr + DMA_CONTROL);
+
+	return;
+}
+
+/**
+ *  stmmac_dma_operation_mode - HW DMA operation mode
+ *  @priv : pointer to the private device structure.
+ *  Description: it sets the DMA operation mode: tx/rx DMA thresholds
+ *  or Store-And-Forward capability. It also verifies the COE for the
+ *  transmission in case of Giga ETH.
+ */
+static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
+{
+	if (!priv->is_gmac) {
+		/* MAC 10/100 */
+		priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, 0);
+		priv->tx_coe = NO_HW_CSUM;
+	} else {
+		if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) {
+			priv->mac_type->ops->dma_mode(priv->dev->base_addr,
+						      SF_DMA_MODE, SF_DMA_MODE);
+			tc = SF_DMA_MODE;
+			priv->tx_coe = HW_CSUM;
+		} else {
+			/* Checksum computation is performed in software. */
+			priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc,
+						      SF_DMA_MODE);
+			priv->tx_coe = NO_HW_CSUM;
+		}
+	}
+	tx_coe = priv->tx_coe;
+
+	return;
+}
+
+#ifdef STMMAC_DEBUG
+/**
+ * show_tx_process_state
+ * @status: tx descriptor status field
+ * Description: it shows the Transmit Process State for CSR5[22:20]
+ */
+static void show_tx_process_state(unsigned int status)
+{
+	unsigned int state;
+	state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
+
+	switch (state) {
+	case 0:
+		pr_info("- TX (Stopped): Reset or Stop command\n");
+		break;
+	case 1:
+		pr_info("- TX (Running):Fetching the Tx desc\n");
+		break;
+	case 2:
+		pr_info("- TX (Running): Waiting for end of tx\n");
+		break;
+	case 3:
+		pr_info("- TX (Running): Reading the data "
+		       "and queuing the data into the Tx buf\n");
+		break;
+	case 6:
+		pr_info("- TX (Suspended): Tx Buff Underflow "
+		       "or an unavailable Transmit descriptor\n");
+		break;
+	case 7:
+		pr_info("- TX (Running): Closing Tx descriptor\n");
+		break;
+	default:
+		break;
+	}
+	return;
+}
+
+/**
+ * show_rx_process_state
+ * @status: rx descriptor status field
+ * Description: it shows the  Receive Process State for CSR5[19:17]
+ */
+static void show_rx_process_state(unsigned int status)
+{
+	unsigned int state;
+	state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
+
+	switch (state) {
+	case 0:
+		pr_info("- RX (Stopped): Reset or Stop command\n");
+		break;
+	case 1:
+		pr_info("- RX (Running): Fetching the Rx desc\n");
+		break;
+	case 2:
+		pr_info("- RX (Running):Checking for end of pkt\n");
+		break;
+	case 3:
+		pr_info("- RX (Running): Waiting for Rx pkt\n");
+		break;
+	case 4:
+		pr_info("- RX (Suspended): Unavailable Rx buf\n");
+		break;
+	case 5:
+		pr_info("- RX (Running): Closing Rx descriptor\n");
+		break;
+	case 6:
+		pr_info("- RX(Running): Flushing the current frame"
+		       " from the Rx buf\n");
+		break;
+	case 7:
+		pr_info("- RX (Running): Queuing the Rx frame"
+		       " from the Rx buf into memory\n");
+		break;
+	default:
+		break;
+	}
+	return;
+}
+#endif
+
+/**
+ * stmmac_tx:
+ * @priv: private driver structure
+ * Description: it reclaims resources after transmission completes.
+ */
+static void stmmac_tx(struct stmmac_priv *priv)
+{
+	unsigned int txsize = priv->dma_tx_size;
+	unsigned long ioaddr = priv->dev->base_addr;
+
+	while (priv->dirty_tx != priv->cur_tx) {
+		int last;
+		unsigned int entry = priv->dirty_tx % txsize;
+		struct sk_buff *skb = priv->tx_skbuff[entry];
+		struct dma_desc *p = priv->dma_tx + entry;
+
+		/* Check if the descriptor is owned by the DMA. */
+		if (priv->mac_type->ops->get_tx_owner(p))
+			break;
+
+		/* Verify tx error by looking at the last segment */
+		last = priv->mac_type->ops->get_tx_ls(p);
+		if (likely(last)) {
+			int tx_error =
+			    priv->mac_type->ops->tx_status(&priv->dev->stats,
+							   &priv->xstats,
+							   p, ioaddr);
+			if (likely(tx_error == 0)) {
+				priv->dev->stats.tx_packets++;
+				priv->xstats.tx_pkt_n++;
+			} else
+				priv->dev->stats.tx_errors++;
+		}
+		TX_DBG("%s: curr %d, dirty %d\n", __func__,
+			priv->cur_tx, priv->dirty_tx);
+
+		if (likely(p->des2))
+			dma_unmap_single(priv->device, p->des2,
+					 priv->mac_type->ops->get_tx_len(p),
+					 DMA_TO_DEVICE);
+		if (unlikely(p->des3))
+			p->des3 = 0;
+
+		if (likely(skb != NULL)) {
+			/*
+			 * If there's room in the queue (limit it to size)
+			 * we add this skb back into the pool,
+			 * if it's the right size.
+			 */
+			if ((skb_queue_len(&priv->rx_recycle) <
+				priv->dma_rx_size) &&
+				skb_recycle_check(skb, priv->dma_buf_sz))
+				__skb_queue_head(&priv->rx_recycle, skb);
+			else
+				dev_kfree_skb(skb);
+
+			priv->tx_skbuff[entry] = NULL;
+		}
+
+		priv->mac_type->ops->release_tx_desc(p);
+
+		entry = (++priv->dirty_tx) % txsize;
+	}
+	if (unlikely(netif_queue_stopped(priv->dev) &&
+		     stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) {
+		netif_tx_lock(priv->dev);
+		if (netif_queue_stopped(priv->dev) &&
+		     stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) {
+			TX_DBG("%s: restart transmit\n", __func__);
+			netif_wake_queue(priv->dev);
+		}
+		netif_tx_unlock(priv->dev);
+	}
+	return;
+}
+
+static inline void stmmac_enable_irq(struct stmmac_priv *priv)
+{
+#ifndef CONFIG_STMMAC_TIMER
+	writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
+#else
+	priv->tm->timer_start(tmrate);
+#endif
+}
+
+static inline void stmmac_disable_irq(struct stmmac_priv *priv)
+{
+#ifndef CONFIG_STMMAC_TIMER
+	writel(0, priv->dev->base_addr + DMA_INTR_ENA);
+#else
+	priv->tm->timer_stop();
+#endif
+}
+
+static int stmmac_has_work(struct stmmac_priv *priv)
+{
+	unsigned int has_work = 0;
+	int rxret, tx_work = 0;
+
+	rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx +
+		(priv->cur_rx % priv->dma_rx_size));
+
+	if (priv->dirty_tx != priv->cur_tx)
+		tx_work = 1;
+
+	if (likely(!rxret || tx_work))
+		has_work = 1;
+
+	return has_work;
+}
+
+static inline void _stmmac_schedule(struct stmmac_priv *priv)
+{
+	if (likely(stmmac_has_work(priv))) {
+		stmmac_disable_irq(priv);
+		napi_schedule(&priv->napi);
+	}
+}
+
+#ifdef CONFIG_STMMAC_TIMER
+void stmmac_schedule(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	priv->xstats.sched_timer_n++;
+
+	_stmmac_schedule(priv);
+
+	return;
+}
+
+static void stmmac_no_timer_started(unsigned int x)
+{;
+};
+
+static void stmmac_no_timer_stopped(void)
+{;
+};
+#endif
+
+/**
+ * stmmac_tx_err:
+ * @priv: pointer to the private device structure
+ * Description: it cleans the descriptors and restarts the transmission
+ * in case of errors.
+ */
+static void stmmac_tx_err(struct stmmac_priv *priv)
+{
+	netif_stop_queue(priv->dev);
+
+	stmmac_dma_stop_tx(priv->dev->base_addr);
+	dma_free_tx_skbufs(priv);
+	priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
+	priv->dirty_tx = 0;
+	priv->cur_tx = 0;
+	stmmac_dma_start_tx(priv->dev->base_addr);
+
+	priv->dev->stats.tx_errors++;
+	netif_wake_queue(priv->dev);
+
+	return;
+}
+
+/**
+ * stmmac_dma_interrupt - Interrupt handler for the driver
+ * @dev: net device structure
+ * Description: Interrupt handler for the driver (DMA).
+ */
+static void stmmac_dma_interrupt(struct net_device *dev)
+{
+	unsigned long ioaddr = dev->base_addr;
+	struct stmmac_priv *priv = netdev_priv(dev);
+	/* read the status register (CSR5) */
+	u32 intr_status = readl(ioaddr + DMA_STATUS);
+
+	DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
+
+#ifdef STMMAC_DEBUG
+	/* It displays the DMA transmit process state (CSR5 register) */
+	if (netif_msg_tx_done(priv))
+		show_tx_process_state(intr_status);
+	if (netif_msg_rx_status(priv))
+		show_rx_process_state(intr_status);
+#endif
+	/* ABNORMAL interrupts */
+	if (unlikely(intr_status & DMA_STATUS_AIS)) {
+		DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
+		if (unlikely(intr_status & DMA_STATUS_UNF)) {
+			DBG(intr, INFO, "transmit underflow\n");
+			if (unlikely(tc != SF_DMA_MODE)
+			    && (tc <= 256)) {
+				/* Try to bump up the threshold */
+				tc += 64;
+				priv->mac_type->ops->dma_mode(ioaddr, tc,
+					      SF_DMA_MODE);
+				priv->xstats.threshold = tc;
+			}
+			stmmac_tx_err(priv);
+			priv->xstats.tx_undeflow_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_TJT)) {
+			DBG(intr, INFO, "transmit jabber\n");
+			priv->xstats.tx_jabber_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_OVF)) {
+			DBG(intr, INFO, "recv overflow\n");
+			priv->xstats.rx_overflow_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_RU)) {
+			DBG(intr, INFO, "receive buffer unavailable\n");
+			priv->xstats.rx_buf_unav_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_RPS)) {
+			DBG(intr, INFO, "receive process stopped\n");
+			priv->xstats.rx_process_stopped_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_RWT)) {
+			DBG(intr, INFO, "receive watchdog\n");
+			priv->xstats.rx_watchdog_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_ETI)) {
+			DBG(intr, INFO, "transmit early interrupt\n");
+			priv->xstats.tx_early_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_TPS)) {
+			DBG(intr, INFO, "transmit process stopped\n");
+			priv->xstats.tx_process_stopped_irq++;
+			stmmac_tx_err(priv);
+		}
+		if (unlikely(intr_status & DMA_STATUS_FBI)) {
+			DBG(intr, INFO, "fatal bus error\n");
+			priv->xstats.fatal_bus_error_irq++;
+			stmmac_tx_err(priv);
+		}
+	}
+
+	/* TX/RX NORMAL interrupts */
+	if (intr_status & DMA_STATUS_NIS) {
+		priv->xstats.normal_irq_n++;
+		if (likely((intr_status & DMA_STATUS_RI) ||
+			 (intr_status & (DMA_STATUS_TI))))
+				_stmmac_schedule(priv);
+	}
+
+	/* Optional hardware blocks, interrupts should be disabled */
+	if (unlikely(intr_status &
+		     (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+		pr_info("%s: unexpected status %08x\n", __func__, intr_status);
+
+	/* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
+	writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
+
+	DBG(intr, INFO, "\n\n");
+
+	return;
+}
+
+/**
+ *  stmmac_open - open entry point of the driver
+ *  @dev : pointer to the device structure.
+ *  Description:
+ *  This function is the open entry point of the driver.
+ *  Return value:
+ *  0 on success and an appropriate (-)ve integer as defined in errno.h
+ *  file on failure.
+ */
+static int stmmac_open(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+	int ret;
+
+	/* Check that the MAC address is valid.  If its not, refuse
+	 * to bring the device up. The user must specify an
+	 * address using the following linux command:
+	 *      ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx  */
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		random_ether_addr(dev->dev_addr);
+		pr_warning("%s: generated random MAC address %pM\n", dev->name,
+			dev->dev_addr);
+	}
+
+	stmmac_verify_args();
+
+	ret = stmmac_init_phy(dev);
+	if (unlikely(ret)) {
+		pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret);
+		return ret;
+	}
+
+	/* Request the IRQ lines */
+	ret = request_irq(dev->irq, &stmmac_interrupt,
+			  IRQF_SHARED, dev->name, dev);
+	if (unlikely(ret < 0)) {
+		pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
+		       __func__, dev->irq, ret);
+		return ret;
+	}
+
+#ifdef CONFIG_STMMAC_TIMER
+	priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
+	if (unlikely(priv->tm == NULL)) {
+		pr_err("%s: ERROR: timer memory alloc failed \n", __func__);
+		return -ENOMEM;
+	}
+	priv->tm->freq = tmrate;
+
+	/* Test if the HW timer can be actually used.
+	 * In case of failure continue with no timer. */
+	if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
+		pr_warning("stmmaceth: cannot attach the HW timer\n");
+		tmrate = 0;
+		priv->tm->freq = 0;
+		priv->tm->timer_start = stmmac_no_timer_started;
+		priv->tm->timer_stop = stmmac_no_timer_stopped;
+	}
+#endif
+
+	/* Create and initialize the TX/RX descriptors chains. */
+	priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
+	priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
+	priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
+	init_dma_desc_rings(dev);
+
+	/* DMA initialization and SW reset */
+	if (unlikely(priv->mac_type->ops->dma_init(ioaddr,
+		priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) {
+
+		pr_err("%s: DMA initialization failed\n", __func__);
+		return -1;
+	}
+
+	/* Copy the MAC addr into the HW  */
+	priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0);
+	/* Initialize the MAC Core */
+	priv->mac_type->ops->core_init(ioaddr);
+
+	priv->shutdown = 0;
+
+	/* Initialise the MMC (if present) to disable all interrupts. */
+	writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK);
+	writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK);
+
+	/* Enable the MAC Rx/Tx */
+	stmmac_mac_enable_rx(ioaddr);
+	stmmac_mac_enable_tx(ioaddr);
+
+	/* Set the HW DMA mode and the COE */
+	stmmac_dma_operation_mode(priv);
+
+	/* Extra statistics */
+	memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
+	priv->xstats.threshold = tc;
+
+	/* Start the ball rolling... */
+	DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
+	stmmac_dma_start_tx(ioaddr);
+	stmmac_dma_start_rx(ioaddr);
+
+#ifdef CONFIG_STMMAC_TIMER
+	priv->tm->timer_start(tmrate);
+#endif
+	/* Dump DMA/MAC registers */
+	if (netif_msg_hw(priv)) {
+		priv->mac_type->ops->dump_mac_regs(ioaddr);
+		priv->mac_type->ops->dump_dma_regs(ioaddr);
+	}
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
+	napi_enable(&priv->napi);
+	skb_queue_head_init(&priv->rx_recycle);
+	netif_start_queue(dev);
+	return 0;
+}
+
+/**
+ *  stmmac_release - close entry point of the driver
+ *  @dev : device pointer.
+ *  Description:
+ *  This is the stop entry point of the driver.
+ */
+static int stmmac_release(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	/* Stop and disconnect the PHY */
+	if (priv->phydev) {
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
+
+	netif_stop_queue(dev);
+
+#ifdef CONFIG_STMMAC_TIMER
+	/* Stop and release the timer */
+	stmmac_close_ext_timer();
+	if (priv->tm != NULL)
+		kfree(priv->tm);
+#endif
+	napi_disable(&priv->napi);
+	skb_queue_purge(&priv->rx_recycle);
+
+	/* Free the IRQ lines */
+	free_irq(dev->irq, dev);
+
+	/* Stop TX/RX DMA and clear the descriptors */
+	stmmac_dma_stop_tx(dev->base_addr);
+	stmmac_dma_stop_rx(dev->base_addr);
+
+	/* Release and free the Rx/Tx resources */
+	free_dma_desc_resources(priv);
+
+	/* Disable the MAC core */
+	stmmac_mac_disable_tx(dev->base_addr);
+	stmmac_mac_disable_rx(dev->base_addr);
+
+	netif_carrier_off(dev);
+
+	return 0;
+}
+
+/*
+ * To perform emulated hardware segmentation on skb.
+ */
+static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb)
+{
+	struct sk_buff *segs, *curr_skb;
+	int gso_segs = skb_shinfo(skb)->gso_segs;
+
+	/* Estimate the number of fragments in the worst case */
+	if (unlikely(stmmac_tx_avail(priv) < gso_segs)) {
+		netif_stop_queue(priv->dev);
+		TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n",
+		       __func__);
+		if (stmmac_tx_avail(priv) < gso_segs)
+			return NETDEV_TX_BUSY;
+
+		netif_wake_queue(priv->dev);
+	}
+	TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n",
+	       skb, skb->len);
+
+	segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO);
+	if (unlikely(IS_ERR(segs)))
+		goto sw_tso_end;
+
+	do {
+		curr_skb = segs;
+		segs = segs->next;
+		TX_DBG("\t\tcurrent skb->len: %d, *curr %p,"
+		       "*next %p\n", curr_skb->len, curr_skb, segs);
+		curr_skb->next = NULL;
+		stmmac_xmit(curr_skb, priv->dev);
+	} while (segs);
+
+sw_tso_end:
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
+					       struct net_device *dev,
+					       int csum_insertion)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	unsigned int nopaged_len = skb_headlen(skb);
+	unsigned int txsize = priv->dma_tx_size;
+	unsigned int entry = priv->cur_tx % txsize;
+	struct dma_desc *desc = priv->dma_tx + entry;
+
+	if (nopaged_len > BUF_SIZE_8KiB) {
+
+		int buf2_size = nopaged_len - BUF_SIZE_8KiB;
+
+		desc->des2 = dma_map_single(priv->device, skb->data,
+					    BUF_SIZE_8KiB, DMA_TO_DEVICE);
+		desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+		priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB,
+						     csum_insertion);
+
+		entry = (++priv->cur_tx) % txsize;
+		desc = priv->dma_tx + entry;
+
+		desc->des2 = dma_map_single(priv->device,
+					skb->data + BUF_SIZE_8KiB,
+					buf2_size, DMA_TO_DEVICE);
+		desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+		priv->mac_type->ops->prepare_tx_desc(desc, 0,
+						     buf2_size, csum_insertion);
+		priv->mac_type->ops->set_tx_owner(desc);
+		priv->tx_skbuff[entry] = NULL;
+	} else {
+		desc->des2 = dma_map_single(priv->device, skb->data,
+					nopaged_len, DMA_TO_DEVICE);
+		desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+		priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
+						     csum_insertion);
+	}
+	return entry;
+}
+
+/**
+ *  stmmac_xmit:
+ *  @skb : the socket buffer
+ *  @dev : device pointer
+ *  Description : Tx entry point of the driver.
+ */
+static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	unsigned int txsize = priv->dma_tx_size;
+	unsigned int entry;
+	int i, csum_insertion = 0;
+	int nfrags = skb_shinfo(skb)->nr_frags;
+	struct dma_desc *desc, *first;
+
+	if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
+		if (!netif_queue_stopped(dev)) {
+			netif_stop_queue(dev);
+			/* This is a hard error, log it. */
+			pr_err("%s: BUG! Tx Ring full when queue awake\n",
+				__func__);
+		}
+		return NETDEV_TX_BUSY;
+	}
+
+	entry = priv->cur_tx % txsize;
+
+#ifdef STMMAC_XMIT_DEBUG
+	if ((skb->len > ETH_FRAME_LEN) || nfrags)
+		pr_info("stmmac xmit:\n"
+		       "\tskb addr %p - len: %d - nopaged_len: %d\n"
+		       "\tn_frags: %d - ip_summed: %d - %s gso\n",
+		       skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed,
+		       !skb_is_gso(skb) ? "isn't" : "is");
+#endif
+
+	if (unlikely(skb_is_gso(skb)))
+		return stmmac_sw_tso(priv, skb);
+
+	if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
+		if (likely(priv->tx_coe == NO_HW_CSUM))
+			skb_checksum_help(skb);
+		else
+			csum_insertion = 1;
+	}
+
+	desc = priv->dma_tx + entry;
+	first = desc;
+
+#ifdef STMMAC_XMIT_DEBUG
+	if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN))
+		pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n"
+		       "\t\tn_frags: %d, ip_summed: %d\n",
+		       skb->len, skb_headlen(skb), nfrags, skb->ip_summed);
+#endif
+	priv->tx_skbuff[entry] = skb;
+	if (unlikely(skb->len >= BUF_SIZE_4KiB)) {
+		entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion);
+		desc = priv->dma_tx + entry;
+	} else {
+		unsigned int nopaged_len = skb_headlen(skb);
+		desc->des2 = dma_map_single(priv->device, skb->data,
+					nopaged_len, DMA_TO_DEVICE);
+		priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
+						     csum_insertion);
+	}
+
+	for (i = 0; i < nfrags; i++) {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+		int len = frag->size;
+
+		entry = (++priv->cur_tx) % txsize;
+		desc = priv->dma_tx + entry;
+
+		TX_DBG("\t[entry %d] segment len: %d\n", entry, len);
+		desc->des2 = dma_map_page(priv->device, frag->page,
+					  frag->page_offset,
+					  len, DMA_TO_DEVICE);
+		priv->tx_skbuff[entry] = NULL;
+		priv->mac_type->ops->prepare_tx_desc(desc, 0, len,
+						     csum_insertion);
+		priv->mac_type->ops->set_tx_owner(desc);
+	}
+
+	/* Interrupt on completition only for the latest segment */
+	priv->mac_type->ops->close_tx_desc(desc);
+#ifdef CONFIG_STMMAC_TIMER
+	/* Clean IC while using timers */
+	priv->mac_type->ops->clear_tx_ic(desc);
+#endif
+	/* To avoid raise condition */
+	priv->mac_type->ops->set_tx_owner(first);
+
+	priv->cur_tx++;
+
+#ifdef STMMAC_XMIT_DEBUG
+	if (netif_msg_pktdata(priv)) {
+		pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, "
+		       "first=%p, nfrags=%d\n",
+		       (priv->cur_tx % txsize), (priv->dirty_tx % txsize),
+		       entry, first, nfrags);
+		display_ring(priv->dma_tx, txsize);
+		pr_info(">>> frame to be transmitted: ");
+		print_pkt(skb->data, skb->len);
+	}
+#endif
+	if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
+		TX_DBG("%s: stop transmitted packets\n", __func__);
+		netif_stop_queue(dev);
+	}
+
+	dev->stats.tx_bytes += skb->len;
+
+	/* CSR1 enables the transmit DMA to check for new descriptor */
+	writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND);
+
+	return NETDEV_TX_OK;
+}
+
+static inline void stmmac_rx_refill(struct stmmac_priv *priv)
+{
+	unsigned int rxsize = priv->dma_rx_size;
+	int bfsize = priv->dma_buf_sz;
+	struct dma_desc *p = priv->dma_rx;
+
+	for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) {
+		unsigned int entry = priv->dirty_rx % rxsize;
+		if (likely(priv->rx_skbuff[entry] == NULL)) {
+			struct sk_buff *skb;
+
+			skb = __skb_dequeue(&priv->rx_recycle);
+			if (skb == NULL)
+				skb = netdev_alloc_skb_ip_align(priv->dev,
+								bfsize);
+
+			if (unlikely(skb == NULL))
+				break;
+
+			priv->rx_skbuff[entry] = skb;
+			priv->rx_skbuff_dma[entry] =
+			    dma_map_single(priv->device, skb->data, bfsize,
+					   DMA_FROM_DEVICE);
+
+			(p + entry)->des2 = priv->rx_skbuff_dma[entry];
+			if (unlikely(priv->is_gmac)) {
+				if (bfsize >= BUF_SIZE_8KiB)
+					(p + entry)->des3 =
+					    (p + entry)->des2 + BUF_SIZE_8KiB;
+			}
+			RX_DBG(KERN_INFO "\trefill entry #%d\n", entry);
+		}
+		priv->mac_type->ops->set_rx_owner(p + entry);
+	}
+	return;
+}
+
+static int stmmac_rx(struct stmmac_priv *priv, int limit)
+{
+	unsigned int rxsize = priv->dma_rx_size;
+	unsigned int entry = priv->cur_rx % rxsize;
+	unsigned int next_entry;
+	unsigned int count = 0;
+	struct dma_desc *p = priv->dma_rx + entry;
+	struct dma_desc *p_next;
+
+#ifdef STMMAC_RX_DEBUG
+	if (netif_msg_hw(priv)) {
+		pr_debug(">>> stmmac_rx: descriptor ring:\n");
+		display_ring(priv->dma_rx, rxsize);
+	}
+#endif
+	count = 0;
+	while (!priv->mac_type->ops->get_rx_owner(p)) {
+		int status;
+
+		if (count >= limit)
+			break;
+
+		count++;
+
+		next_entry = (++priv->cur_rx) % rxsize;
+		p_next = priv->dma_rx + next_entry;
+		prefetch(p_next);
+
+		/* read the status of the incoming frame */
+		status = (priv->mac_type->ops->rx_status(&priv->dev->stats,
+							 &priv->xstats, p));
+		if (unlikely(status == discard_frame))
+			priv->dev->stats.rx_errors++;
+		else {
+			struct sk_buff *skb;
+			/* Length should omit the CRC */
+			int frame_len =
+			    priv->mac_type->ops->get_rx_frame_len(p) - 4;
+
+#ifdef STMMAC_RX_DEBUG
+			if (frame_len > ETH_FRAME_LEN)
+				pr_debug("\tRX frame size %d, COE status: %d\n",
+					frame_len, status);
+
+			if (netif_msg_hw(priv))
+				pr_debug("\tdesc: %p [entry %d] buff=0x%x\n",
+					p, entry, p->des2);
+#endif
+			skb = priv->rx_skbuff[entry];
+			if (unlikely(!skb)) {
+				pr_err("%s: Inconsistent Rx descriptor chain\n",
+					priv->dev->name);
+				priv->dev->stats.rx_dropped++;
+				break;
+			}
+			prefetch(skb->data - NET_IP_ALIGN);
+			priv->rx_skbuff[entry] = NULL;
+
+			skb_put(skb, frame_len);
+			dma_unmap_single(priv->device,
+					 priv->rx_skbuff_dma[entry],
+					 priv->dma_buf_sz, DMA_FROM_DEVICE);
+#ifdef STMMAC_RX_DEBUG
+			if (netif_msg_pktdata(priv)) {
+				pr_info(" frame received (%dbytes)", frame_len);
+				print_pkt(skb->data, frame_len);
+			}
+#endif
+			skb->protocol = eth_type_trans(skb, priv->dev);
+
+			if (unlikely(status == csum_none)) {
+				/* always for the old mac 10/100 */
+				skb->ip_summed = CHECKSUM_NONE;
+				netif_receive_skb(skb);
+			} else {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				napi_gro_receive(&priv->napi, skb);
+			}
+
+			priv->dev->stats.rx_packets++;
+			priv->dev->stats.rx_bytes += frame_len;
+			priv->dev->last_rx = jiffies;
+		}
+		entry = next_entry;
+		p = p_next;	/* use prefetched values */
+	}
+
+	stmmac_rx_refill(priv);
+
+	priv->xstats.rx_pkt_n += count;
+
+	return count;
+}
+
+/**
+ *  stmmac_poll - stmmac poll method (NAPI)
+ *  @napi : pointer to the napi structure.
+ *  @budget : maximum number of packets that the current CPU can receive from
+ *	      all interfaces.
+ *  Description :
+ *   This function implements the the reception process.
+ *   Also it runs the TX completion thread
+ */
+static int stmmac_poll(struct napi_struct *napi, int budget)
+{
+	struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi);
+	int work_done = 0;
+
+	priv->xstats.poll_n++;
+	stmmac_tx(priv);
+	work_done = stmmac_rx(priv, budget);
+
+	if (work_done < budget) {
+		napi_complete(napi);
+		stmmac_enable_irq(priv);
+	}
+	return work_done;
+}
+
+/**
+ *  stmmac_tx_timeout
+ *  @dev : Pointer to net device structure
+ *  Description: this function is called when a packet transmission fails to
+ *   complete within a reasonable tmrate. The driver will mark the error in the
+ *   netdev structure and arrange for the device to be reset to a sane state
+ *   in order to transmit a new packet.
+ */
+static void stmmac_tx_timeout(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	/* Clear Tx resources and restart transmitting again */
+	stmmac_tx_err(priv);
+	return;
+}
+
+/* Configuration changes (passed on by ifconfig) */
+static int stmmac_config(struct net_device *dev, struct ifmap *map)
+{
+	if (dev->flags & IFF_UP)	/* can't act on a running interface */
+		return -EBUSY;
+
+	/* Don't allow changing the I/O address */
+	if (map->base_addr != dev->base_addr) {
+		pr_warning("%s: can't change I/O address\n", dev->name);
+		return -EOPNOTSUPP;
+	}
+
+	/* Don't allow changing the IRQ */
+	if (map->irq != dev->irq) {
+		pr_warning("%s: can't change IRQ number %d\n",
+		       dev->name, dev->irq);
+		return -EOPNOTSUPP;
+	}
+
+	/* ignore other fields */
+	return 0;
+}
+
+/**
+ *  stmmac_multicast_list - entry point for multicast addressing
+ *  @dev : pointer to the device structure
+ *  Description:
+ *  This function is a driver entry point which gets called by the kernel
+ *  whenever multicast addresses must be enabled/disabled.
+ *  Return value:
+ *  void.
+ */
+static void stmmac_multicast_list(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	spin_lock(&priv->lock);
+	priv->mac_type->ops->set_filter(dev);
+	spin_unlock(&priv->lock);
+	return;
+}
+
+/**
+ *  stmmac_change_mtu - entry point to change MTU size for the device.
+ *  @dev : device pointer.
+ *  @new_mtu : the new MTU size for the device.
+ *  Description: the Maximum Transfer Unit (MTU) is used by the network layer
+ *  to drive packet transmission. Ethernet has an MTU of 1500 octets
+ *  (ETH_DATA_LEN). This value can be changed with ifconfig.
+ *  Return value:
+ *  0 on success and an appropriate (-)ve integer as defined in errno.h
+ *  file on failure.
+ */
+static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int max_mtu;
+
+	if (netif_running(dev)) {
+		pr_err("%s: must be stopped to change its MTU\n", dev->name);
+		return -EBUSY;
+	}
+
+	if (priv->is_gmac)
+		max_mtu = JUMBO_LEN;
+	else
+		max_mtu = ETH_DATA_LEN;
+
+	if ((new_mtu < 46) || (new_mtu > max_mtu)) {
+		pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu);
+		return -EINVAL;
+	}
+
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if (unlikely(!dev)) {
+		pr_err("%s: invalid dev pointer\n", __func__);
+		return IRQ_NONE;
+	}
+
+	if (priv->is_gmac) {
+		unsigned long ioaddr = dev->base_addr;
+		/* To handle GMAC own interrupts */
+		priv->mac_type->ops->host_irq_status(ioaddr);
+	}
+	stmmac_dma_interrupt(dev);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling receive - used by NETCONSOLE and other diagnostic tools
+ * to allow network I/O with interrupts disabled. */
+static void stmmac_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	stmmac_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+/**
+ *  stmmac_ioctl - Entry point for the Ioctl
+ *  @dev: Device pointer.
+ *  @rq: An IOCTL specefic structure, that can contain a pointer to
+ *  a proprietary structure used to pass information to the driver.
+ *  @cmd: IOCTL command
+ *  Description:
+ *  Currently there are no special functionality supported in IOCTL, just the
+ *  phy_mii_ioctl(...) can be invoked.
+ */
+static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		if (!priv->phydev)
+			return -EINVAL;
+
+		spin_lock(&priv->lock);
+		ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+		spin_unlock(&priv->lock);
+	default:
+		break;
+	}
+	return ret;
+}
+
+#ifdef STMMAC_VLAN_TAG_USED
+static void stmmac_vlan_rx_register(struct net_device *dev,
+				    struct vlan_group *grp)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp);
+
+	spin_lock(&priv->lock);
+	priv->vlgrp = grp;
+	spin_unlock(&priv->lock);
+
+	return;
+}
+#endif
+
+static const struct net_device_ops stmmac_netdev_ops = {
+	.ndo_open = stmmac_open,
+	.ndo_start_xmit = stmmac_xmit,
+	.ndo_stop = stmmac_release,
+	.ndo_change_mtu = stmmac_change_mtu,
+	.ndo_set_multicast_list = stmmac_multicast_list,
+	.ndo_tx_timeout = stmmac_tx_timeout,
+	.ndo_do_ioctl = stmmac_ioctl,
+	.ndo_set_config = stmmac_config,
+#ifdef STMMAC_VLAN_TAG_USED
+	.ndo_vlan_rx_register = stmmac_vlan_rx_register,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = stmmac_poll_controller,
+#endif
+	.ndo_set_mac_address = eth_mac_addr,
+};
+
+/**
+ * stmmac_probe - Initialization of the adapter .
+ * @dev : device pointer
+ * Description: The function initializes the network device structure for
+ * the STMMAC driver. It also calls the low level routines
+ * in order to init the HW (i.e. the DMA engine)
+ */
+static int stmmac_probe(struct net_device *dev)
+{
+	int ret = 0;
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	ether_setup(dev);
+
+	dev->netdev_ops = &stmmac_netdev_ops;
+	stmmac_set_ethtool_ops(dev);
+
+	dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA);
+	dev->watchdog_timeo = msecs_to_jiffies(watchdog);
+#ifdef STMMAC_VLAN_TAG_USED
+	/* Both mac100 and gmac support receive VLAN tag detection */
+	dev->features |= NETIF_F_HW_VLAN_RX;
+#endif
+	priv->msg_enable = netif_msg_init(debug, default_msg_level);
+
+	if (priv->is_gmac)
+		priv->rx_csum = 1;
+
+	if (flow_ctrl)
+		priv->flow_ctrl = FLOW_AUTO;	/* RX/TX pause on */
+
+	priv->pause = pause;
+	netif_napi_add(dev, &priv->napi, stmmac_poll, 64);
+
+	/* Get the MAC address */
+	priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0);
+
+	if (!is_valid_ether_addr(dev->dev_addr))
+		pr_warning("\tno valid MAC address;"
+			"please, use ifconfig or nwhwconfig!\n");
+
+	ret = register_netdev(dev);
+	if (ret) {
+		pr_err("%s: ERROR %i registering the device\n",
+		       __func__, ret);
+		return -ENODEV;
+	}
+
+	DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
+	    dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
+	    (dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
+
+	spin_lock_init(&priv->lock);
+
+	return ret;
+}
+
+/**
+ * stmmac_mac_device_setup
+ * @dev : device pointer
+ * Description: select and initialise the mac device (mac100 or Gmac).
+ */
+static int stmmac_mac_device_setup(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+
+	struct mac_device_info *device;
+
+	if (priv->is_gmac)
+		device = gmac_setup(ioaddr);
+	else
+		device = mac100_setup(ioaddr);
+
+	if (!device)
+		return -ENOMEM;
+
+	priv->mac_type = device;
+
+	priv->wolenabled = priv->mac_type->hw.pmt;	/* PMT supported */
+	if (priv->wolenabled == PMT_SUPPORTED)
+		priv->wolopts = WAKE_MAGIC;		/* Magic Frame */
+
+	return 0;
+}
+
+static int stmmacphy_dvr_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacphy_data *plat_dat;
+	plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data);
+
+	pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n",
+	       plat_dat->bus_id);
+
+	return 0;
+}
+
+static int stmmacphy_dvr_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver stmmacphy_driver = {
+	.driver = {
+		   .name = PHY_RESOURCE_NAME,
+		   },
+	.probe = stmmacphy_dvr_probe,
+	.remove = stmmacphy_dvr_remove,
+};
+
+/**
+ * stmmac_associate_phy
+ * @dev: pointer to device structure
+ * @data: points to the private structure.
+ * Description: Scans through all the PHYs we have registered and checks if
+ * any are associated with our MAC.  If so, then just fill in
+ * the blanks in our local context structure
+ */
+static int stmmac_associate_phy(struct device *dev, void *data)
+{
+	struct stmmac_priv *priv = (struct stmmac_priv *)data;
+	struct plat_stmmacphy_data *plat_dat;
+
+	plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data);
+
+	DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__,
+		plat_dat->bus_id);
+
+	/* Check that this phy is for the MAC being initialised */
+	if (priv->bus_id != plat_dat->bus_id)
+		return 0;
+
+	/* OK, this PHY is connected to the MAC.
+	   Go ahead and get the parameters */
+	DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__);
+	priv->phy_irq =
+	    platform_get_irq_byname(to_platform_device(dev), "phyirq");
+	DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__,
+	    plat_dat->bus_id, priv->phy_irq);
+
+	/* Override with kernel parameters if supplied XXX CRS XXX
+	 * this needs to have multiple instances */
+	if ((phyaddr >= 0) && (phyaddr <= 31))
+		plat_dat->phy_addr = phyaddr;
+
+	priv->phy_addr = plat_dat->phy_addr;
+	priv->phy_mask = plat_dat->phy_mask;
+	priv->phy_interface = plat_dat->interface;
+	priv->phy_reset = plat_dat->phy_reset;
+
+	DBG(probe, DEBUG, "%s: exiting\n", __func__);
+	return 1;	/* forces exit of driver_for_each_device() */
+}
+
+/**
+ * stmmac_dvr_probe
+ * @pdev: platform device pointer
+ * Description: the driver is initialized through platform_device.
+ */
+static int stmmac_dvr_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct resource *res;
+	unsigned int *addr = NULL;
+	struct net_device *ndev = NULL;
+	struct stmmac_priv *priv;
+	struct plat_stmmacenet_data *plat_dat;
+
+	pr_info("STMMAC driver:\n\tplatform registration... ");
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		goto out;
+	}
+	pr_info("done!\n");
+
+	if (!request_mem_region(res->start, (res->end - res->start),
+				pdev->name)) {
+		pr_err("%s: ERROR: memory allocation failed"
+		       "cannot get the I/O addr 0x%x\n",
+		       __func__, (unsigned int)res->start);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	addr = ioremap(res->start, (res->end - res->start));
+	if (!addr) {
+		pr_err("%s: ERROR: memory mapping failed \n", __func__);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ndev = alloc_etherdev(sizeof(struct stmmac_priv));
+	if (!ndev) {
+		pr_err("%s: ERROR: allocating the device\n", __func__);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+
+	/* Get the MAC information */
+	ndev->irq = platform_get_irq_byname(pdev, "macirq");
+	if (ndev->irq == -ENXIO) {
+		pr_err("%s: ERROR: MAC IRQ configuration "
+		       "information not found\n", __func__);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	priv = netdev_priv(ndev);
+	priv->device = &(pdev->dev);
+	priv->dev = ndev;
+	plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data);
+	priv->bus_id = plat_dat->bus_id;
+	priv->pbl = plat_dat->pbl;	/* TLI */
+	priv->is_gmac = plat_dat->has_gmac;	/* GMAC is on board */
+
+	platform_set_drvdata(pdev, ndev);
+
+	/* Set the I/O base addr */
+	ndev->base_addr = (unsigned long)addr;
+
+	/* MAC HW revice detection */
+	ret = stmmac_mac_device_setup(ndev);
+	if (ret < 0)
+		goto out;
+
+	/* Network Device Registration */
+	ret = stmmac_probe(ndev);
+	if (ret < 0)
+		goto out;
+
+	/* associate a PHY - it is provided by another platform bus */
+	if (!driver_for_each_device
+	    (&(stmmacphy_driver.driver), NULL, (void *)priv,
+	     stmmac_associate_phy)) {
+		pr_err("No PHY device is associated with this MAC!\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	priv->fix_mac_speed = plat_dat->fix_mac_speed;
+	priv->bsp_priv = plat_dat->bsp_priv;
+
+	pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
+	       "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name,
+	       pdev->id, ndev->irq, (unsigned int)addr);
+
+	/* MDIO bus Registration */
+	pr_debug("\tMDIO bus (id: %d)...", priv->bus_id);
+	ret = stmmac_mdio_register(ndev);
+	if (ret < 0)
+		goto out;
+	pr_debug("registered!\n");
+
+out:
+	if (ret < 0) {
+		platform_set_drvdata(pdev, NULL);
+		release_mem_region(res->start, (res->end - res->start));
+		if (addr != NULL)
+			iounmap(addr);
+	}
+
+	return ret;
+}
+
+/**
+ * stmmac_dvr_remove
+ * @pdev: platform device pointer
+ * Description: this function resets the TX/RX processes, disables the MAC RX/TX
+ * changes the link status, releases the DMA descriptor rings,
+ * unregisters the MDIO bus and unmaps the allocated memory.
+ */
+static int stmmac_dvr_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	pr_info("%s:\n\tremoving driver", __func__);
+
+	stmmac_dma_stop_rx(ndev->base_addr);
+	stmmac_dma_stop_tx(ndev->base_addr);
+
+	stmmac_mac_disable_rx(ndev->base_addr);
+	stmmac_mac_disable_tx(ndev->base_addr);
+
+	netif_carrier_off(ndev);
+
+	stmmac_mdio_unregister(ndev);
+
+	platform_set_drvdata(pdev, NULL);
+	unregister_netdev(ndev);
+
+	iounmap((void *)ndev->base_addr);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, (res->end - res->start));
+
+	free_netdev(ndev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int dis_ic = 0;
+
+	if (!dev || !netif_running(dev))
+		return 0;
+
+	spin_lock(&priv->lock);
+
+	if (state.event == PM_EVENT_SUSPEND) {
+		netif_device_detach(dev);
+		netif_stop_queue(dev);
+		if (priv->phydev)
+			phy_stop(priv->phydev);
+
+#ifdef CONFIG_STMMAC_TIMER
+		priv->tm->timer_stop();
+		dis_ic = 1;
+#endif
+		napi_disable(&priv->napi);
+
+		/* Stop TX/RX DMA */
+		stmmac_dma_stop_tx(dev->base_addr);
+		stmmac_dma_stop_rx(dev->base_addr);
+		/* Clear the Rx/Tx descriptors */
+		priv->mac_type->ops->init_rx_desc(priv->dma_rx,
+						  priv->dma_rx_size, dis_ic);
+		priv->mac_type->ops->init_tx_desc(priv->dma_tx,
+						  priv->dma_tx_size);
+
+		stmmac_mac_disable_tx(dev->base_addr);
+
+		if (device_may_wakeup(&(pdev->dev))) {
+			/* Enable Power down mode by programming the PMT regs */
+			if (priv->wolenabled == PMT_SUPPORTED)
+				priv->mac_type->ops->pmt(dev->base_addr,
+							 priv->wolopts);
+		} else {
+			stmmac_mac_disable_rx(dev->base_addr);
+		}
+	} else {
+		priv->shutdown = 1;
+		/* Although this can appear slightly redundant it actually
+		 * makes fast the standby operation and guarantees the driver
+		 * working if hibernation is on media. */
+		stmmac_release(dev);
+	}
+
+	spin_unlock(&priv->lock);
+	return 0;
+}
+
+static int stmmac_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct stmmac_priv *priv = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+
+	if (!netif_running(dev))
+		return 0;
+
+	spin_lock(&priv->lock);
+
+	if (priv->shutdown) {
+		/* Re-open the interface and re-init the MAC/DMA
+		   and the rings. */
+		stmmac_open(dev);
+		goto out_resume;
+	}
+
+	/* Power Down bit, into the PM register, is cleared
+	 * automatically as soon as a magic packet or a Wake-up frame
+	 * is received. Anyway, it's better to manually clear
+	 * this bit because it can generate problems while resuming
+	 * from another devices (e.g. serial console). */
+	if (device_may_wakeup(&(pdev->dev)))
+		if (priv->wolenabled == PMT_SUPPORTED)
+			priv->mac_type->ops->pmt(dev->base_addr, 0);
+
+	netif_device_attach(dev);
+
+	/* Enable the MAC and DMA */
+	stmmac_mac_enable_rx(ioaddr);
+	stmmac_mac_enable_tx(ioaddr);
+	stmmac_dma_start_tx(ioaddr);
+	stmmac_dma_start_rx(ioaddr);
+
+#ifdef CONFIG_STMMAC_TIMER
+	priv->tm->timer_start(tmrate);
+#endif
+	napi_enable(&priv->napi);
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
+	netif_start_queue(dev);
+
+out_resume:
+	spin_unlock(&priv->lock);
+	return 0;
+}
+#endif
+
+static struct platform_driver stmmac_driver = {
+	.driver = {
+		   .name = STMMAC_RESOURCE_NAME,
+		   },
+	.probe = stmmac_dvr_probe,
+	.remove = stmmac_dvr_remove,
+#ifdef CONFIG_PM
+	.suspend = stmmac_suspend,
+	.resume = stmmac_resume,
+#endif
+
+};
+
+/**
+ * stmmac_init_module - Entry point for the driver
+ * Description: This function is the entry point for the driver.
+ */
+static int __init stmmac_init_module(void)
+{
+	int ret;
+
+	if (platform_driver_register(&stmmacphy_driver)) {
+		pr_err("No PHY devices registered!\n");
+		return -ENODEV;
+	}
+
+	ret = platform_driver_register(&stmmac_driver);
+	return ret;
+}
+
+/**
+ * stmmac_cleanup_module - Cleanup routine for the driver
+ * Description: This function is the cleanup routine for the driver.
+ */
+static void __exit stmmac_cleanup_module(void)
+{
+	platform_driver_unregister(&stmmacphy_driver);
+	platform_driver_unregister(&stmmac_driver);
+}
+
+#ifndef MODULE
+static int __init stmmac_cmdline_opt(char *str)
+{
+	char *opt;
+
+	if (!str || !*str)
+		return -EINVAL;
+	while ((opt = strsep(&str, ",")) != NULL) {
+		if (!strncmp(opt, "debug:", 6))
+			strict_strtoul(opt + 6, 0, (unsigned long *)&debug);
+		else if (!strncmp(opt, "phyaddr:", 8))
+			strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr);
+		else if (!strncmp(opt, "dma_txsize:", 11))
+			strict_strtoul(opt + 11, 0,
+				       (unsigned long *)&dma_txsize);
+		else if (!strncmp(opt, "dma_rxsize:", 11))
+			strict_strtoul(opt + 11, 0,
+				       (unsigned long *)&dma_rxsize);
+		else if (!strncmp(opt, "buf_sz:", 7))
+			strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz);
+		else if (!strncmp(opt, "tc:", 3))
+			strict_strtoul(opt + 3, 0, (unsigned long *)&tc);
+		else if (!strncmp(opt, "tx_coe:", 7))
+			strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe);
+		else if (!strncmp(opt, "watchdog:", 9))
+			strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog);
+		else if (!strncmp(opt, "flow_ctrl:", 10))
+			strict_strtoul(opt + 10, 0,
+				       (unsigned long *)&flow_ctrl);
+		else if (!strncmp(opt, "pause:", 6))
+			strict_strtoul(opt + 6, 0, (unsigned long *)&pause);
+#ifdef CONFIG_STMMAC_TIMER
+		else if (!strncmp(opt, "tmrate:", 7))
+			strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate);
+#endif
+	}
+	return 0;
+}
+
+__setup("stmmaceth=", stmmac_cmdline_opt);
+#endif
+
+module_init(stmmac_init_module);
+module_exit(stmmac_cleanup_module);
+
+MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver");
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c
new file mode 100644
index 000000000000..8498552a22fc
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_mdio.c
@@ -0,0 +1,217 @@
+/*******************************************************************************
+  STMMAC Ethernet Driver -- MDIO bus implementation
+  Provides Bus interface for MII registers
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Carl Shaw <carl.shaw@st.com>
+  Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "stmmac.h"
+
+#define MII_BUSY 0x00000001
+#define MII_WRITE 0x00000002
+
+/**
+ * stmmac_mdio_read
+ * @bus: points to the mii_bus structure
+ * @phyaddr: MII addr reg bits 15-11
+ * @phyreg: MII addr reg bits 10-6
+ * Description: it reads data from the MII register from within the phy device.
+ * For the 7111 GMAC, we must set the bit 0 in the MII address register while
+ * accessing the PHY registers.
+ * Fortunately, it seems this has no drawback for the 7109 MAC.
+ */
+static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
+{
+	struct net_device *ndev = bus->priv;
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	unsigned long ioaddr = ndev->base_addr;
+	unsigned int mii_address = priv->mac_type->hw.mii.addr;
+	unsigned int mii_data = priv->mac_type->hw.mii.data;
+
+	int data;
+	u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
+			((phyreg << 6) & (0x000007C0)));
+	regValue |= MII_BUSY;	/* in case of GMAC */
+
+	do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+	writel(regValue, ioaddr + mii_address);
+	do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+
+	/* Read the data from the MII data register */
+	data = (int)readl(ioaddr + mii_data);
+
+	return data;
+}
+
+/**
+ * stmmac_mdio_write
+ * @bus: points to the mii_bus structure
+ * @phyaddr: MII addr reg bits 15-11
+ * @phyreg: MII addr reg bits 10-6
+ * @phydata: phy data
+ * Description: it writes the data into the MII register from within the device.
+ */
+static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
+			     u16 phydata)
+{
+	struct net_device *ndev = bus->priv;
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	unsigned long ioaddr = ndev->base_addr;
+	unsigned int mii_address = priv->mac_type->hw.mii.addr;
+	unsigned int mii_data = priv->mac_type->hw.mii.data;
+
+	u16 value =
+	    (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
+	    | MII_WRITE;
+
+	value |= MII_BUSY;
+
+	/* Wait until any existing MII operation is complete */
+	do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+
+	/* Set the MII address register to write */
+	writel(phydata, ioaddr + mii_data);
+	writel(value, ioaddr + mii_address);
+
+	/* Wait until any existing MII operation is complete */
+	do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+
+	return 0;
+}
+
+/**
+ * stmmac_mdio_reset
+ * @bus: points to the mii_bus structure
+ * Description: reset the MII bus
+ */
+static int stmmac_mdio_reset(struct mii_bus *bus)
+{
+	struct net_device *ndev = bus->priv;
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	unsigned long ioaddr = ndev->base_addr;
+	unsigned int mii_address = priv->mac_type->hw.mii.addr;
+
+	if (priv->phy_reset) {
+		pr_debug("stmmac_mdio_reset: calling phy_reset\n");
+		priv->phy_reset(priv->bsp_priv);
+	}
+
+	/* This is a workaround for problems with the STE101P PHY.
+	 * It doesn't complete its reset until at least one clock cycle
+	 * on MDC, so perform a dummy mdio read.
+	 */
+	writel(0, ioaddr + mii_address);
+
+	return 0;
+}
+
+/**
+ * stmmac_mdio_register
+ * @ndev: net device structure
+ * Description: it registers the MII bus
+ */
+int stmmac_mdio_register(struct net_device *ndev)
+{
+	int err = 0;
+	struct mii_bus *new_bus;
+	int *irqlist;
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	int addr, found;
+
+	new_bus = mdiobus_alloc();
+	if (new_bus == NULL)
+		return -ENOMEM;
+
+	irqlist = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (irqlist == NULL) {
+		err = -ENOMEM;
+		goto irqlist_alloc_fail;
+	}
+
+	/* Assign IRQ to phy at address phy_addr */
+	if (priv->phy_addr != -1)
+		irqlist[priv->phy_addr] = priv->phy_irq;
+
+	new_bus->name = "STMMAC MII Bus";
+	new_bus->read = &stmmac_mdio_read;
+	new_bus->write = &stmmac_mdio_write;
+	new_bus->reset = &stmmac_mdio_reset;
+	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+	new_bus->priv = ndev;
+	new_bus->irq = irqlist;
+	new_bus->phy_mask = priv->phy_mask;
+	new_bus->parent = priv->device;
+	err = mdiobus_register(new_bus);
+	if (err != 0) {
+		pr_err("%s: Cannot register as MDIO bus\n", new_bus->name);
+		goto bus_register_fail;
+	}
+
+	priv->mii = new_bus;
+
+	found = 0;
+	for (addr = 0; addr < 32; addr++) {
+		struct phy_device *phydev = new_bus->phy_map[addr];
+		if (phydev) {
+			if (priv->phy_addr == -1) {
+				priv->phy_addr = addr;
+				phydev->irq = priv->phy_irq;
+				irqlist[addr] = priv->phy_irq;
+			}
+			pr_info("%s: PHY ID %08x at %d IRQ %d (%s)%s\n",
+			       ndev->name, phydev->phy_id, addr,
+			       phydev->irq, dev_name(&phydev->dev),
+			       (addr == priv->phy_addr) ? " active" : "");
+			found = 1;
+		}
+	}
+
+	if (!found)
+		pr_warning("%s: No PHY found\n", ndev->name);
+
+	return 0;
+bus_register_fail:
+	kfree(irqlist);
+irqlist_alloc_fail:
+	kfree(new_bus);
+	return err;
+}
+
+/**
+ * stmmac_mdio_unregister
+ * @ndev: net device structure
+ * Description: it unregisters the MII bus
+ */
+int stmmac_mdio_unregister(struct net_device *ndev)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	mdiobus_unregister(priv->mii);
+	priv->mii->priv = NULL;
+	kfree(priv->mii);
+
+	return 0;
+}
diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c
new file mode 100644
index 000000000000..b838c6582077
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_timer.c
@@ -0,0 +1,140 @@
+/*******************************************************************************
+  STMMAC external timer support.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/etherdevice.h>
+#include "stmmac_timer.h"
+
+static void stmmac_timer_handler(void *data)
+{
+	struct net_device *dev = (struct net_device *)data;
+
+	stmmac_schedule(dev);
+
+	return;
+}
+
+#define STMMAC_TIMER_MSG(timer, freq) \
+printk(KERN_INFO "stmmac_timer: %s Timer ON (freq %dHz)\n", timer, freq);
+
+#if defined(CONFIG_STMMAC_RTC_TIMER)
+#include <linux/rtc.h>
+static struct rtc_device *stmmac_rtc;
+static rtc_task_t stmmac_task;
+
+static void stmmac_rtc_start(unsigned int new_freq)
+{
+	rtc_irq_set_freq(stmmac_rtc, &stmmac_task, new_freq);
+	rtc_irq_set_state(stmmac_rtc, &stmmac_task, 1);
+	return;
+}
+
+static void stmmac_rtc_stop(void)
+{
+	rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0);
+	return;
+}
+
+int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
+{
+	stmmac_task.private_data = dev;
+	stmmac_task.func = stmmac_timer_handler;
+
+	stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
+	if (stmmac_rtc == NULL) {
+		pr_error("open rtc device failed\n");
+		return -ENODEV;
+	}
+
+	rtc_irq_register(stmmac_rtc, &stmmac_task);
+
+	/* Periodic mode is not supported */
+	if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) {
+		pr_error("set periodic failed\n");
+		rtc_irq_unregister(stmmac_rtc, &stmmac_task);
+		rtc_class_close(stmmac_rtc);
+		return -1;
+	}
+
+	STMMAC_TIMER_MSG(CONFIG_RTC_HCTOSYS_DEVICE, tm->freq);
+
+	tm->timer_start = stmmac_rtc_start;
+	tm->timer_stop = stmmac_rtc_stop;
+
+	return 0;
+}
+
+int stmmac_close_ext_timer(void)
+{
+	rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0);
+	rtc_irq_unregister(stmmac_rtc, &stmmac_task);
+	rtc_class_close(stmmac_rtc);
+	return 0;
+}
+
+#elif defined(CONFIG_STMMAC_TMU_TIMER)
+#include <linux/clk.h>
+#define TMU_CHANNEL "tmu2_clk"
+static struct clk *timer_clock;
+
+static void stmmac_tmu_start(unsigned int new_freq)
+{
+	clk_set_rate(timer_clock, new_freq);
+	clk_enable(timer_clock);
+	return;
+}
+
+static void stmmac_tmu_stop(void)
+{
+	clk_disable(timer_clock);
+	return;
+}
+
+int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
+{
+	timer_clock = clk_get(NULL, TMU_CHANNEL);
+
+	if (timer_clock == NULL)
+		return -1;
+
+	if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) {
+		timer_clock = NULL;
+		return -1;
+	}
+
+	STMMAC_TIMER_MSG("TMU2", tm->freq);
+	tm->timer_start = stmmac_tmu_start;
+	tm->timer_stop = stmmac_tmu_stop;
+
+	return 0;
+}
+
+int stmmac_close_ext_timer(void)
+{
+	clk_disable(timer_clock);
+	tmu2_unregister_user();
+	clk_put(timer_clock);
+	return 0;
+}
+#endif
diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h
new file mode 100644
index 000000000000..f795cae33725
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_timer.h
@@ -0,0 +1,41 @@
+/*******************************************************************************
+  STMMAC external timer Header File.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+struct stmmac_timer {
+	void (*timer_start) (unsigned int new_freq);
+	void (*timer_stop) (void);
+	unsigned int freq;
+};
+
+/* Open the HW timer device and return 0 in case of success */
+int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm);
+/* Stop the timer and release it */
+int stmmac_close_ext_timer(void);
+/* Function used for scheduling task within the stmmac */
+void stmmac_schedule(struct net_device *dev);
+
+#if defined(CONFIG_STMMAC_TMU_TIMER)
+extern int tmu2_register_user(void *fnt, void *data);
+extern void tmu2_unregister_user(void);
+#endif
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 305ec3d783db..7019a0d1a82b 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -38,6 +38,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/in.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/delay.h>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f09bc5dfe8b2..ba5d3fe753b6 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -902,11 +902,12 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg)
 	struct tg3 *tp = bp->priv;
 	u32 val;
 
-	if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
-		return -EAGAIN;
+	spin_lock_bh(&tp->lock);
 
 	if (tg3_readphy(tp, reg, &val))
-		return -EIO;
+		val = -EIO;
+
+	spin_unlock_bh(&tp->lock);
 
 	return val;
 }
@@ -914,14 +915,16 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg)
 static int tg3_mdio_write(struct mii_bus *bp, int mii_id, int reg, u16 val)
 {
 	struct tg3 *tp = bp->priv;
+	u32 ret = 0;
 
-	if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
-		return -EAGAIN;
+	spin_lock_bh(&tp->lock);
 
 	if (tg3_writephy(tp, reg, val))
-		return -EIO;
+		ret = -EIO;
 
-	return 0;
+	spin_unlock_bh(&tp->lock);
+
+	return ret;
 }
 
 static int tg3_mdio_reset(struct mii_bus *bp)
@@ -1011,12 +1014,6 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 
 static void tg3_mdio_start(struct tg3 *tp)
 {
-	if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
-		mutex_lock(&tp->mdio_bus->mdio_lock);
-		tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
-		mutex_unlock(&tp->mdio_bus->mdio_lock);
-	}
-
 	tp->mi_mode &= ~MAC_MI_MODE_AUTO_POLL;
 	tw32_f(MAC_MI_MODE, tp->mi_mode);
 	udelay(80);
@@ -1041,15 +1038,6 @@ static void tg3_mdio_start(struct tg3 *tp)
 		tg3_mdio_config_5785(tp);
 }
 
-static void tg3_mdio_stop(struct tg3 *tp)
-{
-	if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
-		mutex_lock(&tp->mdio_bus->mdio_lock);
-		tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_PAUSED;
-		mutex_unlock(&tp->mdio_bus->mdio_lock);
-	}
-}
-
 static int tg3_mdio_init(struct tg3 *tp)
 {
 	int i;
@@ -1141,7 +1129,6 @@ static void tg3_mdio_fini(struct tg3 *tp)
 		tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_INITED;
 		mdiobus_unregister(tp->mdio_bus);
 		mdiobus_free(tp->mdio_bus);
-		tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
 	}
 }
 
@@ -1363,7 +1350,7 @@ static void tg3_adjust_link(struct net_device *dev)
 	struct tg3 *tp = netdev_priv(dev);
 	struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR];
 
-	spin_lock(&tp->lock);
+	spin_lock_bh(&tp->lock);
 
 	mac_mode = tp->mac_mode & ~(MAC_MODE_PORT_MODE_MASK |
 				    MAC_MODE_HALF_DUPLEX);
@@ -1431,7 +1418,7 @@ static void tg3_adjust_link(struct net_device *dev)
 	tp->link_config.active_speed = phydev->speed;
 	tp->link_config.active_duplex = phydev->duplex;
 
-	spin_unlock(&tp->lock);
+	spin_unlock_bh(&tp->lock);
 
 	if (linkmesg)
 		tg3_link_report(tp);
@@ -6392,8 +6379,6 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	tg3_nvram_lock(tp);
 
-	tg3_mdio_stop(tp);
-
 	tg3_ape_lock(tp, TG3_APE_LOCK_GRC);
 
 	/* No matching tg3_nvram_unlock() after this because
@@ -8698,6 +8683,8 @@ static int tg3_close(struct net_device *dev)
 
 	del_timer_sync(&tp->timer);
 
+	tg3_phy_stop(tp);
+
 	tg3_full_lock(tp, 1);
 #if 0
 	tg3_dump_state(tp);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 82b45d8797b4..bab7940158e6 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2412,7 +2412,6 @@ struct ring_info {
 
 struct tx_ring_info {
 	struct sk_buff			*skb;
-	u32				prev_vlan_tag;
 };
 
 struct tg3_config_info {
@@ -2749,7 +2748,6 @@ struct tg3 {
 #define TG3_FLG3_5701_DMA_BUG		0x00000008
 #define TG3_FLG3_USE_PHYLIB		0x00000010
 #define TG3_FLG3_MDIOBUS_INITED		0x00000020
-#define TG3_FLG3_MDIOBUS_PAUSED		0x00000040
 #define TG3_FLG3_PHY_CONNECTED		0x00000080
 #define TG3_FLG3_RGMII_STD_IBND_DISABLE	0x00000100
 #define TG3_FLG3_RGMII_EXT_IBND_RX_EN	0x00000200
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 525bbc5b9c9d..36cb2423bcf1 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -108,6 +108,7 @@ in the event that chatty debug messages are desired - jjs 12/30/98 */
 #define IBMTR_DEBUG_MESSAGES 0
 
 #include <linux/module.h>
+#include <linux/sched.h>
 
 #ifdef PCMCIA		/* required for ibmtr_cs.c to build */
 #undef MODULE		/* yes, really */
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index d6d345229fe9..5921f5bdd764 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -108,6 +108,7 @@ static const int multicast_filter_limit = 32;
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/timer.h>
 #include <linux/errno.h>
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 6fdaba8674b9..ed4a508ef262 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -62,8 +62,11 @@ static char *devid=NULL;
 static struct usb_eth_dev usb_dev_id[] = {
 #define	PEGASUS_DEV(pn, vid, pid, flags)	\
 	{.name = pn, .vendor = vid, .device = pid, .private = flags},
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+	PEGASUS_DEV(pn, vid, pid, flags)
 #include "pegasus.h"
 #undef	PEGASUS_DEV
+#undef	PEGASUS_DEV_CLASS
 	{NULL, 0, 0, 0},
 	{NULL, 0, 0, 0}
 };
@@ -71,8 +74,18 @@ static struct usb_eth_dev usb_dev_id[] = {
 static struct usb_device_id pegasus_ids[] = {
 #define	PEGASUS_DEV(pn, vid, pid, flags) \
 	{.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid},
+/*
+ * The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product
+ * IDs as the Belkin F5D5050, so we need to teach the pegasus driver to
+ * ignore adaptors belonging to the "Wireless" class 0xE0. For this one
+ * case anyway, seeing as the pegasus is for "Wired" adaptors.
+ */
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+	{.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS), \
+	.idVendor = vid, .idProduct = pid, .bDeviceClass = dclass},
 #include "pegasus.h"
 #undef	PEGASUS_DEV
+#undef	PEGASUS_DEV_CLASS
 	{},
 	{}
 };
diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h
index f968c834ff63..5d02f0200737 100644
--- a/drivers/net/usb/pegasus.h
+++ b/drivers/net/usb/pegasus.h
@@ -202,7 +202,11 @@ PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,
+/*
+ * Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors
+ * with the same product IDs by checking the device class too.
+ */
+PEGASUS_DEV_CLASS( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
 		DEFAULT_GPIO_RESET )
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index d032bba9bc4c..0caa8008c51c 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -418,6 +418,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
 		goto halt_fail_and_release;
 	}
 	memcpy(net->dev_addr, bp, ETH_ALEN);
+	memcpy(net->perm_addr, bp, ETH_ALEN);
 
 	/* set a nonzero filter to enable data transfers */
 	memset(u.set, 0, sizeof *u.set);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index d445845f2779..3709d6af9abf 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -22,7 +22,6 @@
 #include <linux/ethtool.h>
 #include <linux/module.h>
 #include <linux/virtio.h>
-#include <linux/virtio_ids.h>
 #include <linux/virtio_net.h>
 #include <linux/scatterlist.h>
 #include <linux/if_vlan.h>
@@ -454,7 +453,7 @@ static unsigned int free_old_xmit_skbs(struct virtnet_info *vi)
 		vi->dev->stats.tx_bytes += skb->len;
 		vi->dev->stats.tx_packets++;
 		tot_sgs += skb_vnet_hdr(skb)->num_sg;
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 	}
 	return tot_sgs;
 }
@@ -948,7 +947,7 @@ free:
 	return err;
 }
 
-static void virtnet_remove(struct virtio_device *vdev)
+static void __devexit virtnet_remove(struct virtio_device *vdev)
 {
 	struct virtnet_info *vi = vdev->priv;
 	struct sk_buff *skb;
diff --git a/drivers/net/vmxnet3/Makefile b/drivers/net/vmxnet3/Makefile
new file mode 100644
index 000000000000..880f5098eac9
--- /dev/null
+++ b/drivers/net/vmxnet3/Makefile
@@ -0,0 +1,35 @@
+################################################################################
+#
+# Linux driver for VMware's vmxnet3 ethernet NIC.
+#
+# Copyright (C) 2007-2009, VMware, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License and no later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+# NON INFRINGEMENT.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+#
+#
+################################################################################
+
+#
+# Makefile for the VMware vmxnet3 ethernet NIC driver
+#
+
+obj-$(CONFIG_VMXNET3) += vmxnet3.o
+
+vmxnet3-objs := vmxnet3_drv.o vmxnet3_ethtool.o
diff --git a/drivers/net/vmxnet3/upt1_defs.h b/drivers/net/vmxnet3/upt1_defs.h
new file mode 100644
index 000000000000..37108fb226d3
--- /dev/null
+++ b/drivers/net/vmxnet3/upt1_defs.h
@@ -0,0 +1,96 @@
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+#ifndef _UPT1_DEFS_H
+#define _UPT1_DEFS_H
+
+struct UPT1_TxStats {
+	u64			TSOPktsTxOK;  /* TSO pkts post-segmentation */
+	u64			TSOBytesTxOK;
+	u64			ucastPktsTxOK;
+	u64			ucastBytesTxOK;
+	u64			mcastPktsTxOK;
+	u64			mcastBytesTxOK;
+	u64			bcastPktsTxOK;
+	u64			bcastBytesTxOK;
+	u64			pktsTxError;
+	u64			pktsTxDiscard;
+};
+
+struct UPT1_RxStats {
+	u64			LROPktsRxOK;    /* LRO pkts */
+	u64			LROBytesRxOK;   /* bytes from LRO pkts */
+	/* the following counters are for pkts from the wire, i.e., pre-LRO */
+	u64			ucastPktsRxOK;
+	u64			ucastBytesRxOK;
+	u64			mcastPktsRxOK;
+	u64			mcastBytesRxOK;
+	u64			bcastPktsRxOK;
+	u64			bcastBytesRxOK;
+	u64			pktsRxOutOfBuf;
+	u64			pktsRxError;
+};
+
+/* interrupt moderation level */
+enum {
+	UPT1_IML_NONE		= 0, /* no interrupt moderation */
+	UPT1_IML_HIGHEST	= 7, /* least intr generated */
+	UPT1_IML_ADAPTIVE	= 8, /* adpative intr moderation */
+};
+/* values for UPT1_RSSConf.hashFunc */
+enum {
+	UPT1_RSS_HASH_TYPE_NONE      = 0x0,
+	UPT1_RSS_HASH_TYPE_IPV4      = 0x01,
+	UPT1_RSS_HASH_TYPE_TCP_IPV4  = 0x02,
+	UPT1_RSS_HASH_TYPE_IPV6      = 0x04,
+	UPT1_RSS_HASH_TYPE_TCP_IPV6  = 0x08,
+};
+
+enum {
+	UPT1_RSS_HASH_FUNC_NONE      = 0x0,
+	UPT1_RSS_HASH_FUNC_TOEPLITZ  = 0x01,
+};
+
+#define UPT1_RSS_MAX_KEY_SIZE        40
+#define UPT1_RSS_MAX_IND_TABLE_SIZE  128
+
+struct UPT1_RSSConf {
+	u16			hashType;
+	u16			hashFunc;
+	u16			hashKeySize;
+	u16			indTableSize;
+	u8			hashKey[UPT1_RSS_MAX_KEY_SIZE];
+	u8			indTable[UPT1_RSS_MAX_IND_TABLE_SIZE];
+};
+
+/* features */
+enum {
+	UPT1_F_RXCSUM		= 0x0001,   /* rx csum verification */
+	UPT1_F_RSS		= 0x0002,
+	UPT1_F_RXVLAN		= 0x0004,   /* VLAN tag stripping */
+	UPT1_F_LRO		= 0x0008,
+};
+#endif
diff --git a/drivers/net/vmxnet3/vmxnet3_defs.h b/drivers/net/vmxnet3/vmxnet3_defs.h
new file mode 100644
index 000000000000..dc8ee4438a4f
--- /dev/null
+++ b/drivers/net/vmxnet3/vmxnet3_defs.h
@@ -0,0 +1,535 @@
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+#ifndef _VMXNET3_DEFS_H_
+#define _VMXNET3_DEFS_H_
+
+#include "upt1_defs.h"
+
+/* all registers are 32 bit wide */
+/* BAR 1 */
+enum {
+	VMXNET3_REG_VRRS	= 0x0,	/* Vmxnet3 Revision Report Selection */
+	VMXNET3_REG_UVRS	= 0x8,	/* UPT Version Report Selection */
+	VMXNET3_REG_DSAL	= 0x10,	/* Driver Shared Address Low */
+	VMXNET3_REG_DSAH	= 0x18,	/* Driver Shared Address High */
+	VMXNET3_REG_CMD		= 0x20,	/* Command */
+	VMXNET3_REG_MACL	= 0x28,	/* MAC Address Low */
+	VMXNET3_REG_MACH	= 0x30,	/* MAC Address High */
+	VMXNET3_REG_ICR		= 0x38,	/* Interrupt Cause Register */
+	VMXNET3_REG_ECR		= 0x40	/* Event Cause Register */
+};
+
+/* BAR 0 */
+enum {
+	VMXNET3_REG_IMR		= 0x0,	 /* Interrupt Mask Register */
+	VMXNET3_REG_TXPROD	= 0x600, /* Tx Producer Index */
+	VMXNET3_REG_RXPROD	= 0x800, /* Rx Producer Index for ring 1 */
+	VMXNET3_REG_RXPROD2	= 0xA00	 /* Rx Producer Index for ring 2 */
+};
+
+#define VMXNET3_PT_REG_SIZE     4096	/* BAR 0 */
+#define VMXNET3_VD_REG_SIZE     4096	/* BAR 1 */
+
+#define VMXNET3_REG_ALIGN       8	/* All registers are 8-byte aligned. */
+#define VMXNET3_REG_ALIGN_MASK  0x7
+
+/* I/O Mapped access to registers */
+#define VMXNET3_IO_TYPE_PT              0
+#define VMXNET3_IO_TYPE_VD              1
+#define VMXNET3_IO_ADDR(type, reg)      (((type) << 24) | ((reg) & 0xFFFFFF))
+#define VMXNET3_IO_TYPE(addr)           ((addr) >> 24)
+#define VMXNET3_IO_REG(addr)            ((addr) & 0xFFFFFF)
+
+enum {
+	VMXNET3_CMD_FIRST_SET = 0xCAFE0000,
+	VMXNET3_CMD_ACTIVATE_DEV = VMXNET3_CMD_FIRST_SET,
+	VMXNET3_CMD_QUIESCE_DEV,
+	VMXNET3_CMD_RESET_DEV,
+	VMXNET3_CMD_UPDATE_RX_MODE,
+	VMXNET3_CMD_UPDATE_MAC_FILTERS,
+	VMXNET3_CMD_UPDATE_VLAN_FILTERS,
+	VMXNET3_CMD_UPDATE_RSSIDT,
+	VMXNET3_CMD_UPDATE_IML,
+	VMXNET3_CMD_UPDATE_PMCFG,
+	VMXNET3_CMD_UPDATE_FEATURE,
+	VMXNET3_CMD_LOAD_PLUGIN,
+
+	VMXNET3_CMD_FIRST_GET = 0xF00D0000,
+	VMXNET3_CMD_GET_QUEUE_STATUS = VMXNET3_CMD_FIRST_GET,
+	VMXNET3_CMD_GET_STATS,
+	VMXNET3_CMD_GET_LINK,
+	VMXNET3_CMD_GET_PERM_MAC_LO,
+	VMXNET3_CMD_GET_PERM_MAC_HI,
+	VMXNET3_CMD_GET_DID_LO,
+	VMXNET3_CMD_GET_DID_HI,
+	VMXNET3_CMD_GET_DEV_EXTRA_INFO,
+	VMXNET3_CMD_GET_CONF_INTR
+};
+
+struct Vmxnet3_TxDesc {
+	u64		addr;
+
+	u32		len:14;
+	u32		gen:1;      /* generation bit */
+	u32		rsvd:1;
+	u32		dtype:1;    /* descriptor type */
+	u32		ext1:1;
+	u32		msscof:14;  /* MSS, checksum offset, flags */
+
+	u32		hlen:10;    /* header len */
+	u32		om:2;       /* offload mode */
+	u32		eop:1;      /* End Of Packet */
+	u32		cq:1;       /* completion request */
+	u32		ext2:1;
+	u32		ti:1;       /* VLAN Tag Insertion */
+	u32		tci:16;     /* Tag to Insert */
+};
+
+/* TxDesc.OM values */
+#define VMXNET3_OM_NONE		0
+#define VMXNET3_OM_CSUM		2
+#define VMXNET3_OM_TSO		3
+
+/* fields in TxDesc we access w/o using bit fields */
+#define VMXNET3_TXD_EOP_SHIFT	12
+#define VMXNET3_TXD_CQ_SHIFT	13
+#define VMXNET3_TXD_GEN_SHIFT	14
+
+#define VMXNET3_TXD_CQ		(1 << VMXNET3_TXD_CQ_SHIFT)
+#define VMXNET3_TXD_EOP		(1 << VMXNET3_TXD_EOP_SHIFT)
+#define VMXNET3_TXD_GEN		(1 << VMXNET3_TXD_GEN_SHIFT)
+
+#define VMXNET3_HDR_COPY_SIZE   128
+
+
+struct Vmxnet3_TxDataDesc {
+	u8		data[VMXNET3_HDR_COPY_SIZE];
+};
+
+
+struct Vmxnet3_TxCompDesc {
+	u32		txdIdx:12;    /* Index of the EOP TxDesc */
+	u32		ext1:20;
+
+	u32		ext2;
+	u32		ext3;
+
+	u32		rsvd:24;
+	u32		type:7;       /* completion type */
+	u32		gen:1;        /* generation bit */
+};
+
+
+struct Vmxnet3_RxDesc {
+	u64		addr;
+
+	u32		len:14;
+	u32		btype:1;      /* Buffer Type */
+	u32		dtype:1;      /* Descriptor type */
+	u32		rsvd:15;
+	u32		gen:1;        /* Generation bit */
+
+	u32		ext1;
+};
+
+/* values of RXD.BTYPE */
+#define VMXNET3_RXD_BTYPE_HEAD   0    /* head only */
+#define VMXNET3_RXD_BTYPE_BODY   1    /* body only */
+
+/* fields in RxDesc we access w/o using bit fields */
+#define VMXNET3_RXD_BTYPE_SHIFT  14
+#define VMXNET3_RXD_GEN_SHIFT    31
+
+
+struct Vmxnet3_RxCompDesc {
+	u32		rxdIdx:12;    /* Index of the RxDesc */
+	u32		ext1:2;
+	u32		eop:1;        /* End of Packet */
+	u32		sop:1;        /* Start of Packet */
+	u32		rqID:10;      /* rx queue/ring ID */
+	u32		rssType:4;    /* RSS hash type used */
+	u32		cnc:1;        /* Checksum Not Calculated */
+	u32		ext2:1;
+
+	u32		rssHash;      /* RSS hash value */
+
+	u32		len:14;       /* data length */
+	u32		err:1;        /* Error */
+	u32		ts:1;         /* Tag is stripped */
+	u32		tci:16;       /* Tag stripped */
+
+	u32		csum:16;
+	u32		tuc:1;        /* TCP/UDP Checksum Correct */
+	u32		udp:1;        /* UDP packet */
+	u32		tcp:1;        /* TCP packet */
+	u32		ipc:1;        /* IP Checksum Correct */
+	u32		v6:1;         /* IPv6 */
+	u32		v4:1;         /* IPv4 */
+	u32		frg:1;        /* IP Fragment */
+	u32		fcs:1;        /* Frame CRC correct */
+	u32		type:7;       /* completion type */
+	u32		gen:1;        /* generation bit */
+};
+
+/* fields in RxCompDesc we access via Vmxnet3_GenericDesc.dword[3] */
+#define VMXNET3_RCD_TUC_SHIFT	16
+#define VMXNET3_RCD_IPC_SHIFT	19
+
+/* fields in RxCompDesc we access via Vmxnet3_GenericDesc.qword[1] */
+#define VMXNET3_RCD_TYPE_SHIFT	56
+#define VMXNET3_RCD_GEN_SHIFT	63
+
+/* csum OK for TCP/UDP pkts over IP */
+#define VMXNET3_RCD_CSUM_OK (1 << VMXNET3_RCD_TUC_SHIFT | \
+			     1 << VMXNET3_RCD_IPC_SHIFT)
+
+/* value of RxCompDesc.rssType */
+enum {
+	VMXNET3_RCD_RSS_TYPE_NONE     = 0,
+	VMXNET3_RCD_RSS_TYPE_IPV4     = 1,
+	VMXNET3_RCD_RSS_TYPE_TCPIPV4  = 2,
+	VMXNET3_RCD_RSS_TYPE_IPV6     = 3,
+	VMXNET3_RCD_RSS_TYPE_TCPIPV6  = 4,
+};
+
+
+/* a union for accessing all cmd/completion descriptors */
+union Vmxnet3_GenericDesc {
+	u64				qword[2];
+	u32				dword[4];
+	u16				word[8];
+	struct Vmxnet3_TxDesc		txd;
+	struct Vmxnet3_RxDesc		rxd;
+	struct Vmxnet3_TxCompDesc	tcd;
+	struct Vmxnet3_RxCompDesc	rcd;
+};
+
+#define VMXNET3_INIT_GEN       1
+
+/* Max size of a single tx buffer */
+#define VMXNET3_MAX_TX_BUF_SIZE  (1 << 14)
+
+/* # of tx desc needed for a tx buffer size */
+#define VMXNET3_TXD_NEEDED(size) (((size) + VMXNET3_MAX_TX_BUF_SIZE - 1) / \
+				  VMXNET3_MAX_TX_BUF_SIZE)
+
+/* max # of tx descs for a non-tso pkt */
+#define VMXNET3_MAX_TXD_PER_PKT 16
+
+/* Max size of a single rx buffer */
+#define VMXNET3_MAX_RX_BUF_SIZE  ((1 << 14) - 1)
+/* Minimum size of a type 0 buffer */
+#define VMXNET3_MIN_T0_BUF_SIZE  128
+#define VMXNET3_MAX_CSUM_OFFSET  1024
+
+/* Ring base address alignment */
+#define VMXNET3_RING_BA_ALIGN   512
+#define VMXNET3_RING_BA_MASK    (VMXNET3_RING_BA_ALIGN - 1)
+
+/* Ring size must be a multiple of 32 */
+#define VMXNET3_RING_SIZE_ALIGN 32
+#define VMXNET3_RING_SIZE_MASK  (VMXNET3_RING_SIZE_ALIGN - 1)
+
+/* Max ring size */
+#define VMXNET3_TX_RING_MAX_SIZE   4096
+#define VMXNET3_TC_RING_MAX_SIZE   4096
+#define VMXNET3_RX_RING_MAX_SIZE   4096
+#define VMXNET3_RC_RING_MAX_SIZE   8192
+
+/* a list of reasons for queue stop */
+
+enum {
+ VMXNET3_ERR_NOEOP        = 0x80000000,  /* cannot find the EOP desc of a pkt */
+ VMXNET3_ERR_TXD_REUSE    = 0x80000001,  /* reuse TxDesc before tx completion */
+ VMXNET3_ERR_BIG_PKT      = 0x80000002,  /* too many TxDesc for a pkt */
+ VMXNET3_ERR_DESC_NOT_SPT = 0x80000003,  /* descriptor type not supported */
+ VMXNET3_ERR_SMALL_BUF    = 0x80000004,  /* type 0 buffer too small */
+ VMXNET3_ERR_STRESS       = 0x80000005,  /* stress option firing in vmkernel */
+ VMXNET3_ERR_SWITCH       = 0x80000006,  /* mode switch failure */
+ VMXNET3_ERR_TXD_INVALID  = 0x80000007,  /* invalid TxDesc */
+};
+
+/* completion descriptor types */
+#define VMXNET3_CDTYPE_TXCOMP      0    /* Tx Completion Descriptor */
+#define VMXNET3_CDTYPE_RXCOMP      3    /* Rx Completion Descriptor */
+
+enum {
+	VMXNET3_GOS_BITS_UNK    = 0,   /* unknown */
+	VMXNET3_GOS_BITS_32     = 1,
+	VMXNET3_GOS_BITS_64     = 2,
+};
+
+#define VMXNET3_GOS_TYPE_LINUX	1
+
+
+struct Vmxnet3_GOSInfo {
+	u32				gosBits:2;	/* 32-bit or 64-bit? */
+	u32				gosType:4;   /* which guest */
+	u32				gosVer:16;   /* gos version */
+	u32				gosMisc:10;  /* other info about gos */
+};
+
+
+struct Vmxnet3_DriverInfo {
+	u32				version;
+	struct Vmxnet3_GOSInfo		gos;
+	u32				vmxnet3RevSpt;
+	u32				uptVerSpt;
+};
+
+
+#define VMXNET3_REV1_MAGIC  0xbabefee1
+
+/*
+ * QueueDescPA must be 128 bytes aligned. It points to an array of
+ * Vmxnet3_TxQueueDesc followed by an array of Vmxnet3_RxQueueDesc.
+ * The number of Vmxnet3_TxQueueDesc/Vmxnet3_RxQueueDesc are specified by
+ * Vmxnet3_MiscConf.numTxQueues/numRxQueues, respectively.
+ */
+#define VMXNET3_QUEUE_DESC_ALIGN  128
+
+
+struct Vmxnet3_MiscConf {
+	struct Vmxnet3_DriverInfo driverInfo;
+	u64		uptFeatures;
+	u64		ddPA;         /* driver data PA */
+	u64		queueDescPA;  /* queue descriptor table PA */
+	u32		ddLen;        /* driver data len */
+	u32		queueDescLen; /* queue desc. table len in bytes */
+	u32		mtu;
+	u16		maxNumRxSG;
+	u8		numTxQueues;
+	u8		numRxQueues;
+	u32		reserved[4];
+};
+
+
+struct Vmxnet3_TxQueueConf {
+	u64		txRingBasePA;
+	u64		dataRingBasePA;
+	u64		compRingBasePA;
+	u64		ddPA;         /* driver data */
+	u64		reserved;
+	u32		txRingSize;   /* # of tx desc */
+	u32		dataRingSize; /* # of data desc */
+	u32		compRingSize; /* # of comp desc */
+	u32		ddLen;        /* size of driver data */
+	u8		intrIdx;
+	u8		_pad[7];
+};
+
+
+struct Vmxnet3_RxQueueConf {
+	u64		rxRingBasePA[2];
+	u64		compRingBasePA;
+	u64		ddPA;            /* driver data */
+	u64		reserved;
+	u32		rxRingSize[2];   /* # of rx desc */
+	u32		compRingSize;    /* # of rx comp desc */
+	u32		ddLen;           /* size of driver data */
+	u8		intrIdx;
+	u8		_pad[7];
+};
+
+
+enum vmxnet3_intr_mask_mode {
+	VMXNET3_IMM_AUTO   = 0,
+	VMXNET3_IMM_ACTIVE = 1,
+	VMXNET3_IMM_LAZY   = 2
+};
+
+enum vmxnet3_intr_type {
+	VMXNET3_IT_AUTO = 0,
+	VMXNET3_IT_INTX = 1,
+	VMXNET3_IT_MSI  = 2,
+	VMXNET3_IT_MSIX = 3
+};
+
+#define VMXNET3_MAX_TX_QUEUES  8
+#define VMXNET3_MAX_RX_QUEUES  16
+/* addition 1 for events */
+#define VMXNET3_MAX_INTRS      25
+
+
+struct Vmxnet3_IntrConf {
+	bool		autoMask;
+	u8		numIntrs;      /* # of interrupts */
+	u8		eventIntrIdx;
+	u8		modLevels[VMXNET3_MAX_INTRS];	/* moderation level for
+							 * each intr */
+	u32		reserved[3];
+};
+
+/* one bit per VLAN ID, the size is in the units of u32	*/
+#define VMXNET3_VFT_SIZE  (4096 / (sizeof(u32) * 8))
+
+
+struct Vmxnet3_QueueStatus {
+	bool		stopped;
+	u8		_pad[3];
+	u32		error;
+};
+
+
+struct Vmxnet3_TxQueueCtrl {
+	u32		txNumDeferred;
+	u32		txThreshold;
+	u64		reserved;
+};
+
+
+struct Vmxnet3_RxQueueCtrl {
+	bool		updateRxProd;
+	u8		_pad[7];
+	u64		reserved;
+};
+
+enum {
+	VMXNET3_RXM_UCAST     = 0x01,  /* unicast only */
+	VMXNET3_RXM_MCAST     = 0x02,  /* multicast passing the filters */
+	VMXNET3_RXM_BCAST     = 0x04,  /* broadcast only */
+	VMXNET3_RXM_ALL_MULTI = 0x08,  /* all multicast */
+	VMXNET3_RXM_PROMISC   = 0x10  /* promiscuous */
+};
+
+struct Vmxnet3_RxFilterConf {
+	u32		rxMode;       /* VMXNET3_RXM_xxx */
+	u16		mfTableLen;   /* size of the multicast filter table */
+	u16		_pad1;
+	u64		mfTablePA;    /* PA of the multicast filters table */
+	u32		vfTable[VMXNET3_VFT_SIZE]; /* vlan filter */
+};
+
+
+#define VMXNET3_PM_MAX_FILTERS        6
+#define VMXNET3_PM_MAX_PATTERN_SIZE   128
+#define VMXNET3_PM_MAX_MASK_SIZE      (VMXNET3_PM_MAX_PATTERN_SIZE / 8)
+
+#define VMXNET3_PM_WAKEUP_MAGIC       0x01  /* wake up on magic pkts */
+#define VMXNET3_PM_WAKEUP_FILTER      0x02  /* wake up on pkts matching
+					     * filters */
+
+
+struct Vmxnet3_PM_PktFilter {
+	u8		maskSize;
+	u8		patternSize;
+	u8		mask[VMXNET3_PM_MAX_MASK_SIZE];
+	u8		pattern[VMXNET3_PM_MAX_PATTERN_SIZE];
+	u8		pad[6];
+};
+
+
+struct Vmxnet3_PMConf {
+	u16		wakeUpEvents;  /* VMXNET3_PM_WAKEUP_xxx */
+	u8		numFilters;
+	u8		pad[5];
+	struct Vmxnet3_PM_PktFilter filters[VMXNET3_PM_MAX_FILTERS];
+};
+
+
+struct Vmxnet3_VariableLenConfDesc {
+	u32		confVer;
+	u32		confLen;
+	u64		confPA;
+};
+
+
+struct Vmxnet3_TxQueueDesc {
+	struct Vmxnet3_TxQueueCtrl		ctrl;
+	struct Vmxnet3_TxQueueConf		conf;
+
+	/* Driver read after a GET command */
+	struct Vmxnet3_QueueStatus		status;
+	struct UPT1_TxStats			stats;
+	u8					_pad[88]; /* 128 aligned */
+};
+
+
+struct Vmxnet3_RxQueueDesc {
+	struct Vmxnet3_RxQueueCtrl		ctrl;
+	struct Vmxnet3_RxQueueConf		conf;
+	/* Driver read after a GET commad */
+	struct Vmxnet3_QueueStatus		status;
+	struct UPT1_RxStats			stats;
+	u8				      __pad[88]; /* 128 aligned */
+};
+
+
+struct Vmxnet3_DSDevRead {
+	/* read-only region for device, read by dev in response to a SET cmd */
+	struct Vmxnet3_MiscConf			misc;
+	struct Vmxnet3_IntrConf			intrConf;
+	struct Vmxnet3_RxFilterConf		rxFilterConf;
+	struct Vmxnet3_VariableLenConfDesc	rssConfDesc;
+	struct Vmxnet3_VariableLenConfDesc	pmConfDesc;
+	struct Vmxnet3_VariableLenConfDesc	pluginConfDesc;
+};
+
+/* All structures in DriverShared are padded to multiples of 8 bytes */
+struct Vmxnet3_DriverShared {
+	u32				magic;
+	/* make devRead start at 64bit boundaries */
+	u32					pad;
+	struct Vmxnet3_DSDevRead		devRead;
+	u32					ecr;
+	u32					reserved[5];
+};
+
+
+#define VMXNET3_ECR_RQERR       (1 << 0)
+#define VMXNET3_ECR_TQERR       (1 << 1)
+#define VMXNET3_ECR_LINK        (1 << 2)
+#define VMXNET3_ECR_DIC         (1 << 3)
+#define VMXNET3_ECR_DEBUG       (1 << 4)
+
+/* flip the gen bit of a ring */
+#define VMXNET3_FLIP_RING_GEN(gen) ((gen) = (gen) ^ 0x1)
+
+/* only use this if moving the idx won't affect the gen bit */
+#define VMXNET3_INC_RING_IDX_ONLY(idx, ring_size) \
+	do {\
+		(idx)++;\
+		if (unlikely((idx) == (ring_size))) {\
+			(idx) = 0;\
+		} \
+	} while (0)
+
+#define VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid) \
+	(vfTable[vid >> 5] |= (1 << (vid & 31)))
+#define VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid) \
+	(vfTable[vid >> 5] &= ~(1 << (vid & 31)))
+
+#define VMXNET3_VFTABLE_ENTRY_IS_SET(vfTable, vid) \
+	((vfTable[vid >> 5] & (1 << (vid & 31))) != 0)
+
+#define VMXNET3_MAX_MTU     9000
+#define VMXNET3_MIN_MTU     60
+
+#define VMXNET3_LINK_UP         (10000 << 16 | 1)    /* 10 Gbps, up */
+#define VMXNET3_LINK_DOWN       0
+
+#endif /* _VMXNET3_DEFS_H_ */
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
new file mode 100644
index 000000000000..004353a46af0
--- /dev/null
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -0,0 +1,2574 @@
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+#include "vmxnet3_int.h"
+
+char vmxnet3_driver_name[] = "vmxnet3";
+#define VMXNET3_DRIVER_DESC "VMware vmxnet3 virtual NIC driver"
+
+
+/*
+ * PCI Device ID Table
+ * Last entry must be all 0s
+ */
+static const struct pci_device_id vmxnet3_pciid_table[] = {
+	{PCI_VDEVICE(VMWARE, PCI_DEVICE_ID_VMWARE_VMXNET3)},
+	{0}
+};
+
+MODULE_DEVICE_TABLE(pci, vmxnet3_pciid_table);
+
+static atomic_t devices_found;
+
+
+/*
+ *    Enable/Disable the given intr
+ */
+static void
+vmxnet3_enable_intr(struct vmxnet3_adapter *adapter, unsigned intr_idx)
+{
+	VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_IMR + intr_idx * 8, 0);
+}
+
+
+static void
+vmxnet3_disable_intr(struct vmxnet3_adapter *adapter, unsigned intr_idx)
+{
+	VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_IMR + intr_idx * 8, 1);
+}
+
+
+/*
+ *    Enable/Disable all intrs used by the device
+ */
+static void
+vmxnet3_enable_all_intrs(struct vmxnet3_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->intr.num_intrs; i++)
+		vmxnet3_enable_intr(adapter, i);
+}
+
+
+static void
+vmxnet3_disable_all_intrs(struct vmxnet3_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->intr.num_intrs; i++)
+		vmxnet3_disable_intr(adapter, i);
+}
+
+
+static void
+vmxnet3_ack_events(struct vmxnet3_adapter *adapter, u32 events)
+{
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_ECR, events);
+}
+
+
+static bool
+vmxnet3_tq_stopped(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
+{
+	return netif_queue_stopped(adapter->netdev);
+}
+
+
+static void
+vmxnet3_tq_start(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
+{
+	tq->stopped = false;
+	netif_start_queue(adapter->netdev);
+}
+
+
+static void
+vmxnet3_tq_wake(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
+{
+	tq->stopped = false;
+	netif_wake_queue(adapter->netdev);
+}
+
+
+static void
+vmxnet3_tq_stop(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
+{
+	tq->stopped = true;
+	tq->num_stop++;
+	netif_stop_queue(adapter->netdev);
+}
+
+
+/*
+ * Check the link state. This may start or stop the tx queue.
+ */
+static void
+vmxnet3_check_link(struct vmxnet3_adapter *adapter)
+{
+	u32 ret;
+
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_LINK);
+	ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
+	adapter->link_speed = ret >> 16;
+	if (ret & 1) { /* Link is up. */
+		printk(KERN_INFO "%s: NIC Link is Up %d Mbps\n",
+		       adapter->netdev->name, adapter->link_speed);
+		if (!netif_carrier_ok(adapter->netdev))
+			netif_carrier_on(adapter->netdev);
+
+		vmxnet3_tq_start(&adapter->tx_queue, adapter);
+	} else {
+		printk(KERN_INFO "%s: NIC Link is Down\n",
+		       adapter->netdev->name);
+		if (netif_carrier_ok(adapter->netdev))
+			netif_carrier_off(adapter->netdev);
+
+		vmxnet3_tq_stop(&adapter->tx_queue, adapter);
+	}
+}
+
+
+static void
+vmxnet3_process_events(struct vmxnet3_adapter *adapter)
+{
+	u32 events = adapter->shared->ecr;
+	if (!events)
+		return;
+
+	vmxnet3_ack_events(adapter, events);
+
+	/* Check if link state has changed */
+	if (events & VMXNET3_ECR_LINK)
+		vmxnet3_check_link(adapter);
+
+	/* Check if there is an error on xmit/recv queues */
+	if (events & (VMXNET3_ECR_TQERR | VMXNET3_ECR_RQERR)) {
+		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+				       VMXNET3_CMD_GET_QUEUE_STATUS);
+
+		if (adapter->tqd_start->status.stopped) {
+			printk(KERN_ERR "%s: tq error 0x%x\n",
+			       adapter->netdev->name,
+			       adapter->tqd_start->status.error);
+		}
+		if (adapter->rqd_start->status.stopped) {
+			printk(KERN_ERR "%s: rq error 0x%x\n",
+			       adapter->netdev->name,
+			       adapter->rqd_start->status.error);
+		}
+
+		schedule_work(&adapter->work);
+	}
+}
+
+
+static void
+vmxnet3_unmap_tx_buf(struct vmxnet3_tx_buf_info *tbi,
+		     struct pci_dev *pdev)
+{
+	if (tbi->map_type == VMXNET3_MAP_SINGLE)
+		pci_unmap_single(pdev, tbi->dma_addr, tbi->len,
+				 PCI_DMA_TODEVICE);
+	else if (tbi->map_type == VMXNET3_MAP_PAGE)
+		pci_unmap_page(pdev, tbi->dma_addr, tbi->len,
+			       PCI_DMA_TODEVICE);
+	else
+		BUG_ON(tbi->map_type != VMXNET3_MAP_NONE);
+
+	tbi->map_type = VMXNET3_MAP_NONE; /* to help debugging */
+}
+
+
+static int
+vmxnet3_unmap_pkt(u32 eop_idx, struct vmxnet3_tx_queue *tq,
+		  struct pci_dev *pdev,	struct vmxnet3_adapter *adapter)
+{
+	struct sk_buff *skb;
+	int entries = 0;
+
+	/* no out of order completion */
+	BUG_ON(tq->buf_info[eop_idx].sop_idx != tq->tx_ring.next2comp);
+	BUG_ON(tq->tx_ring.base[eop_idx].txd.eop != 1);
+
+	skb = tq->buf_info[eop_idx].skb;
+	BUG_ON(skb == NULL);
+	tq->buf_info[eop_idx].skb = NULL;
+
+	VMXNET3_INC_RING_IDX_ONLY(eop_idx, tq->tx_ring.size);
+
+	while (tq->tx_ring.next2comp != eop_idx) {
+		vmxnet3_unmap_tx_buf(tq->buf_info + tq->tx_ring.next2comp,
+				     pdev);
+
+		/* update next2comp w/o tx_lock. Since we are marking more,
+		 * instead of less, tx ring entries avail, the worst case is
+		 * that the tx routine incorrectly re-queues a pkt due to
+		 * insufficient tx ring entries.
+		 */
+		vmxnet3_cmd_ring_adv_next2comp(&tq->tx_ring);
+		entries++;
+	}
+
+	dev_kfree_skb_any(skb);
+	return entries;
+}
+
+
+static int
+vmxnet3_tq_tx_complete(struct vmxnet3_tx_queue *tq,
+			struct vmxnet3_adapter *adapter)
+{
+	int completed = 0;
+	union Vmxnet3_GenericDesc *gdesc;
+
+	gdesc = tq->comp_ring.base + tq->comp_ring.next2proc;
+	while (gdesc->tcd.gen == tq->comp_ring.gen) {
+		completed += vmxnet3_unmap_pkt(gdesc->tcd.txdIdx, tq,
+					       adapter->pdev, adapter);
+
+		vmxnet3_comp_ring_adv_next2proc(&tq->comp_ring);
+		gdesc = tq->comp_ring.base + tq->comp_ring.next2proc;
+	}
+
+	if (completed) {
+		spin_lock(&tq->tx_lock);
+		if (unlikely(vmxnet3_tq_stopped(tq, adapter) &&
+			     vmxnet3_cmd_ring_desc_avail(&tq->tx_ring) >
+			     VMXNET3_WAKE_QUEUE_THRESHOLD(tq) &&
+			     netif_carrier_ok(adapter->netdev))) {
+			vmxnet3_tq_wake(tq, adapter);
+		}
+		spin_unlock(&tq->tx_lock);
+	}
+	return completed;
+}
+
+
+static void
+vmxnet3_tq_cleanup(struct vmxnet3_tx_queue *tq,
+		   struct vmxnet3_adapter *adapter)
+{
+	int i;
+
+	while (tq->tx_ring.next2comp != tq->tx_ring.next2fill) {
+		struct vmxnet3_tx_buf_info *tbi;
+		union Vmxnet3_GenericDesc *gdesc;
+
+		tbi = tq->buf_info + tq->tx_ring.next2comp;
+		gdesc = tq->tx_ring.base + tq->tx_ring.next2comp;
+
+		vmxnet3_unmap_tx_buf(tbi, adapter->pdev);
+		if (tbi->skb) {
+			dev_kfree_skb_any(tbi->skb);
+			tbi->skb = NULL;
+		}
+		vmxnet3_cmd_ring_adv_next2comp(&tq->tx_ring);
+	}
+
+	/* sanity check, verify all buffers are indeed unmapped and freed */
+	for (i = 0; i < tq->tx_ring.size; i++) {
+		BUG_ON(tq->buf_info[i].skb != NULL ||
+		       tq->buf_info[i].map_type != VMXNET3_MAP_NONE);
+	}
+
+	tq->tx_ring.gen = VMXNET3_INIT_GEN;
+	tq->tx_ring.next2fill = tq->tx_ring.next2comp = 0;
+
+	tq->comp_ring.gen = VMXNET3_INIT_GEN;
+	tq->comp_ring.next2proc = 0;
+}
+
+
+void
+vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq,
+		   struct vmxnet3_adapter *adapter)
+{
+	if (tq->tx_ring.base) {
+		pci_free_consistent(adapter->pdev, tq->tx_ring.size *
+				    sizeof(struct Vmxnet3_TxDesc),
+				    tq->tx_ring.base, tq->tx_ring.basePA);
+		tq->tx_ring.base = NULL;
+	}
+	if (tq->data_ring.base) {
+		pci_free_consistent(adapter->pdev, tq->data_ring.size *
+				    sizeof(struct Vmxnet3_TxDataDesc),
+				    tq->data_ring.base, tq->data_ring.basePA);
+		tq->data_ring.base = NULL;
+	}
+	if (tq->comp_ring.base) {
+		pci_free_consistent(adapter->pdev, tq->comp_ring.size *
+				    sizeof(struct Vmxnet3_TxCompDesc),
+				    tq->comp_ring.base, tq->comp_ring.basePA);
+		tq->comp_ring.base = NULL;
+	}
+	kfree(tq->buf_info);
+	tq->buf_info = NULL;
+}
+
+
+static void
+vmxnet3_tq_init(struct vmxnet3_tx_queue *tq,
+		struct vmxnet3_adapter *adapter)
+{
+	int i;
+
+	/* reset the tx ring contents to 0 and reset the tx ring states */
+	memset(tq->tx_ring.base, 0, tq->tx_ring.size *
+	       sizeof(struct Vmxnet3_TxDesc));
+	tq->tx_ring.next2fill = tq->tx_ring.next2comp = 0;
+	tq->tx_ring.gen = VMXNET3_INIT_GEN;
+
+	memset(tq->data_ring.base, 0, tq->data_ring.size *
+	       sizeof(struct Vmxnet3_TxDataDesc));
+
+	/* reset the tx comp ring contents to 0 and reset comp ring states */
+	memset(tq->comp_ring.base, 0, tq->comp_ring.size *
+	       sizeof(struct Vmxnet3_TxCompDesc));
+	tq->comp_ring.next2proc = 0;
+	tq->comp_ring.gen = VMXNET3_INIT_GEN;
+
+	/* reset the bookkeeping data */
+	memset(tq->buf_info, 0, sizeof(tq->buf_info[0]) * tq->tx_ring.size);
+	for (i = 0; i < tq->tx_ring.size; i++)
+		tq->buf_info[i].map_type = VMXNET3_MAP_NONE;
+
+	/* stats are not reset */
+}
+
+
+static int
+vmxnet3_tq_create(struct vmxnet3_tx_queue *tq,
+		  struct vmxnet3_adapter *adapter)
+{
+	BUG_ON(tq->tx_ring.base || tq->data_ring.base ||
+	       tq->comp_ring.base || tq->buf_info);
+
+	tq->tx_ring.base = pci_alloc_consistent(adapter->pdev, tq->tx_ring.size
+			   * sizeof(struct Vmxnet3_TxDesc),
+			   &tq->tx_ring.basePA);
+	if (!tq->tx_ring.base) {
+		printk(KERN_ERR "%s: failed to allocate tx ring\n",
+		       adapter->netdev->name);
+		goto err;
+	}
+
+	tq->data_ring.base = pci_alloc_consistent(adapter->pdev,
+			     tq->data_ring.size *
+			     sizeof(struct Vmxnet3_TxDataDesc),
+			     &tq->data_ring.basePA);
+	if (!tq->data_ring.base) {
+		printk(KERN_ERR "%s: failed to allocate data ring\n",
+		       adapter->netdev->name);
+		goto err;
+	}
+
+	tq->comp_ring.base = pci_alloc_consistent(adapter->pdev,
+			     tq->comp_ring.size *
+			     sizeof(struct Vmxnet3_TxCompDesc),
+			     &tq->comp_ring.basePA);
+	if (!tq->comp_ring.base) {
+		printk(KERN_ERR "%s: failed to allocate tx comp ring\n",
+		       adapter->netdev->name);
+		goto err;
+	}
+
+	tq->buf_info = kcalloc(tq->tx_ring.size, sizeof(tq->buf_info[0]),
+			       GFP_KERNEL);
+	if (!tq->buf_info) {
+		printk(KERN_ERR "%s: failed to allocate tx bufinfo\n",
+		       adapter->netdev->name);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	vmxnet3_tq_destroy(tq, adapter);
+	return -ENOMEM;
+}
+
+
+/*
+ *    starting from ring->next2fill, allocate rx buffers for the given ring
+ *    of the rx queue and update the rx desc. stop after @num_to_alloc buffers
+ *    are allocated or allocation fails
+ */
+
+static int
+vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx,
+			int num_to_alloc, struct vmxnet3_adapter *adapter)
+{
+	int num_allocated = 0;
+	struct vmxnet3_rx_buf_info *rbi_base = rq->buf_info[ring_idx];
+	struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx];
+	u32 val;
+
+	while (num_allocated < num_to_alloc) {
+		struct vmxnet3_rx_buf_info *rbi;
+		union Vmxnet3_GenericDesc *gd;
+
+		rbi = rbi_base + ring->next2fill;
+		gd = ring->base + ring->next2fill;
+
+		if (rbi->buf_type == VMXNET3_RX_BUF_SKB) {
+			if (rbi->skb == NULL) {
+				rbi->skb = dev_alloc_skb(rbi->len +
+							 NET_IP_ALIGN);
+				if (unlikely(rbi->skb == NULL)) {
+					rq->stats.rx_buf_alloc_failure++;
+					break;
+				}
+				rbi->skb->dev = adapter->netdev;
+
+				skb_reserve(rbi->skb, NET_IP_ALIGN);
+				rbi->dma_addr = pci_map_single(adapter->pdev,
+						rbi->skb->data, rbi->len,
+						PCI_DMA_FROMDEVICE);
+			} else {
+				/* rx buffer skipped by the device */
+			}
+			val = VMXNET3_RXD_BTYPE_HEAD << VMXNET3_RXD_BTYPE_SHIFT;
+		} else {
+			BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE ||
+			       rbi->len  != PAGE_SIZE);
+
+			if (rbi->page == NULL) {
+				rbi->page = alloc_page(GFP_ATOMIC);
+				if (unlikely(rbi->page == NULL)) {
+					rq->stats.rx_buf_alloc_failure++;
+					break;
+				}
+				rbi->dma_addr = pci_map_page(adapter->pdev,
+						rbi->page, 0, PAGE_SIZE,
+						PCI_DMA_FROMDEVICE);
+			} else {
+				/* rx buffers skipped by the device */
+			}
+			val = VMXNET3_RXD_BTYPE_BODY << VMXNET3_RXD_BTYPE_SHIFT;
+		}
+
+		BUG_ON(rbi->dma_addr == 0);
+		gd->rxd.addr = rbi->dma_addr;
+		gd->dword[2] = (ring->gen << VMXNET3_RXD_GEN_SHIFT) | val |
+				rbi->len;
+
+		num_allocated++;
+		vmxnet3_cmd_ring_adv_next2fill(ring);
+	}
+	rq->uncommitted[ring_idx] += num_allocated;
+
+	dev_dbg(&adapter->netdev->dev,
+		"alloc_rx_buf: %d allocated, next2fill %u, next2comp "
+		"%u, uncommited %u\n", num_allocated, ring->next2fill,
+		ring->next2comp, rq->uncommitted[ring_idx]);
+
+	/* so that the device can distinguish a full ring and an empty ring */
+	BUG_ON(num_allocated != 0 && ring->next2fill == ring->next2comp);
+
+	return num_allocated;
+}
+
+
+static void
+vmxnet3_append_frag(struct sk_buff *skb, struct Vmxnet3_RxCompDesc *rcd,
+		    struct vmxnet3_rx_buf_info *rbi)
+{
+	struct skb_frag_struct *frag = skb_shinfo(skb)->frags +
+		skb_shinfo(skb)->nr_frags;
+
+	BUG_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS);
+
+	frag->page = rbi->page;
+	frag->page_offset = 0;
+	frag->size = rcd->len;
+	skb->data_len += frag->size;
+	skb_shinfo(skb)->nr_frags++;
+}
+
+
+static void
+vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx,
+		struct vmxnet3_tx_queue *tq, struct pci_dev *pdev,
+		struct vmxnet3_adapter *adapter)
+{
+	u32 dw2, len;
+	unsigned long buf_offset;
+	int i;
+	union Vmxnet3_GenericDesc *gdesc;
+	struct vmxnet3_tx_buf_info *tbi = NULL;
+
+	BUG_ON(ctx->copy_size > skb_headlen(skb));
+
+	/* use the previous gen bit for the SOP desc */
+	dw2 = (tq->tx_ring.gen ^ 0x1) << VMXNET3_TXD_GEN_SHIFT;
+
+	ctx->sop_txd = tq->tx_ring.base + tq->tx_ring.next2fill;
+	gdesc = ctx->sop_txd; /* both loops below can be skipped */
+
+	/* no need to map the buffer if headers are copied */
+	if (ctx->copy_size) {
+		ctx->sop_txd->txd.addr = tq->data_ring.basePA +
+					tq->tx_ring.next2fill *
+					sizeof(struct Vmxnet3_TxDataDesc);
+		ctx->sop_txd->dword[2] = dw2 | ctx->copy_size;
+		ctx->sop_txd->dword[3] = 0;
+
+		tbi = tq->buf_info + tq->tx_ring.next2fill;
+		tbi->map_type = VMXNET3_MAP_NONE;
+
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
+			tq->tx_ring.next2fill, ctx->sop_txd->txd.addr,
+			ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]);
+		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+
+		/* use the right gen for non-SOP desc */
+		dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+	}
+
+	/* linear part can use multiple tx desc if it's big */
+	len = skb_headlen(skb) - ctx->copy_size;
+	buf_offset = ctx->copy_size;
+	while (len) {
+		u32 buf_size;
+
+		buf_size = len > VMXNET3_MAX_TX_BUF_SIZE ?
+			   VMXNET3_MAX_TX_BUF_SIZE : len;
+
+		tbi = tq->buf_info + tq->tx_ring.next2fill;
+		tbi->map_type = VMXNET3_MAP_SINGLE;
+		tbi->dma_addr = pci_map_single(adapter->pdev,
+				skb->data + buf_offset, buf_size,
+				PCI_DMA_TODEVICE);
+
+		tbi->len = buf_size; /* this automatically convert 2^14 to 0 */
+
+		gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
+		BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
+
+		gdesc->txd.addr = tbi->dma_addr;
+		gdesc->dword[2] = dw2 | buf_size;
+		gdesc->dword[3] = 0;
+
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
+			tq->tx_ring.next2fill, gdesc->txd.addr,
+			gdesc->dword[2], gdesc->dword[3]);
+		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+		dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+
+		len -= buf_size;
+		buf_offset += buf_size;
+	}
+
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+
+		tbi = tq->buf_info + tq->tx_ring.next2fill;
+		tbi->map_type = VMXNET3_MAP_PAGE;
+		tbi->dma_addr = pci_map_page(adapter->pdev, frag->page,
+					     frag->page_offset, frag->size,
+					     PCI_DMA_TODEVICE);
+
+		tbi->len = frag->size;
+
+		gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
+		BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
+
+		gdesc->txd.addr = tbi->dma_addr;
+		gdesc->dword[2] = dw2 | frag->size;
+		gdesc->dword[3] = 0;
+
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%llu %u %u\n",
+			tq->tx_ring.next2fill, gdesc->txd.addr,
+			gdesc->dword[2], gdesc->dword[3]);
+		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+		dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+	}
+
+	ctx->eop_txd = gdesc;
+
+	/* set the last buf_info for the pkt */
+	tbi->skb = skb;
+	tbi->sop_idx = ctx->sop_txd - tq->tx_ring.base;
+}
+
+
+/*
+ *    parse and copy relevant protocol headers:
+ *      For a tso pkt, relevant headers are L2/3/4 including options
+ *      For a pkt requesting csum offloading, they are L2/3 and may include L4
+ *      if it's a TCP/UDP pkt
+ *
+ * Returns:
+ *    -1:  error happens during parsing
+ *     0:  protocol headers parsed, but too big to be copied
+ *     1:  protocol headers parsed and copied
+ *
+ * Other effects:
+ *    1. related *ctx fields are updated.
+ *    2. ctx->copy_size is # of bytes copied
+ *    3. the portion copied is guaranteed to be in the linear part
+ *
+ */
+static int
+vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
+			   struct vmxnet3_tx_ctx *ctx,
+			   struct vmxnet3_adapter *adapter)
+{
+	struct Vmxnet3_TxDataDesc *tdd;
+
+	if (ctx->mss) {
+		ctx->eth_ip_hdr_size = skb_transport_offset(skb);
+		ctx->l4_hdr_size = ((struct tcphdr *)
+				   skb_transport_header(skb))->doff * 4;
+		ctx->copy_size = ctx->eth_ip_hdr_size + ctx->l4_hdr_size;
+	} else {
+		unsigned int pull_size;
+
+		if (skb->ip_summed == CHECKSUM_PARTIAL) {
+			ctx->eth_ip_hdr_size = skb_transport_offset(skb);
+
+			if (ctx->ipv4) {
+				struct iphdr *iph = (struct iphdr *)
+						    skb_network_header(skb);
+				if (iph->protocol == IPPROTO_TCP) {
+					pull_size = ctx->eth_ip_hdr_size +
+						    sizeof(struct tcphdr);
+
+					if (unlikely(!pskb_may_pull(skb,
+								pull_size))) {
+						goto err;
+					}
+					ctx->l4_hdr_size = ((struct tcphdr *)
+					   skb_transport_header(skb))->doff * 4;
+				} else if (iph->protocol == IPPROTO_UDP) {
+					ctx->l4_hdr_size =
+							sizeof(struct udphdr);
+				} else {
+					ctx->l4_hdr_size = 0;
+				}
+			} else {
+				/* for simplicity, don't copy L4 headers */
+				ctx->l4_hdr_size = 0;
+			}
+			ctx->copy_size = ctx->eth_ip_hdr_size +
+					 ctx->l4_hdr_size;
+		} else {
+			ctx->eth_ip_hdr_size = 0;
+			ctx->l4_hdr_size = 0;
+			/* copy as much as allowed */
+			ctx->copy_size = min((unsigned int)VMXNET3_HDR_COPY_SIZE
+					     , skb_headlen(skb));
+		}
+
+		/* make sure headers are accessible directly */
+		if (unlikely(!pskb_may_pull(skb, ctx->copy_size)))
+			goto err;
+	}
+
+	if (unlikely(ctx->copy_size > VMXNET3_HDR_COPY_SIZE)) {
+		tq->stats.oversized_hdr++;
+		ctx->copy_size = 0;
+		return 0;
+	}
+
+	tdd = tq->data_ring.base + tq->tx_ring.next2fill;
+
+	memcpy(tdd->data, skb->data, ctx->copy_size);
+	dev_dbg(&adapter->netdev->dev,
+		"copy %u bytes to dataRing[%u]\n",
+		ctx->copy_size, tq->tx_ring.next2fill);
+	return 1;
+
+err:
+	return -1;
+}
+
+
+static void
+vmxnet3_prepare_tso(struct sk_buff *skb,
+		    struct vmxnet3_tx_ctx *ctx)
+{
+	struct tcphdr *tcph = (struct tcphdr *)skb_transport_header(skb);
+	if (ctx->ipv4) {
+		struct iphdr *iph = (struct iphdr *)skb_network_header(skb);
+		iph->check = 0;
+		tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, 0,
+						 IPPROTO_TCP, 0);
+	} else {
+		struct ipv6hdr *iph = (struct ipv6hdr *)skb_network_header(skb);
+		tcph->check = ~csum_ipv6_magic(&iph->saddr, &iph->daddr, 0,
+					       IPPROTO_TCP, 0);
+	}
+}
+
+
+/*
+ * Transmits a pkt thru a given tq
+ * Returns:
+ *    NETDEV_TX_OK:      descriptors are setup successfully
+ *    NETDEV_TX_OK:      error occured, the pkt is dropped
+ *    NETDEV_TX_BUSY:    tx ring is full, queue is stopped
+ *
+ * Side-effects:
+ *    1. tx ring may be changed
+ *    2. tq stats may be updated accordingly
+ *    3. shared->txNumDeferred may be updated
+ */
+
+static int
+vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
+		struct vmxnet3_adapter *adapter, struct net_device *netdev)
+{
+	int ret;
+	u32 count;
+	unsigned long flags;
+	struct vmxnet3_tx_ctx ctx;
+	union Vmxnet3_GenericDesc *gdesc;
+
+	/* conservatively estimate # of descriptors to use */
+	count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) +
+		skb_shinfo(skb)->nr_frags + 1;
+
+	ctx.ipv4 = (skb->protocol == __constant_ntohs(ETH_P_IP));
+
+	ctx.mss = skb_shinfo(skb)->gso_size;
+	if (ctx.mss) {
+		if (skb_header_cloned(skb)) {
+			if (unlikely(pskb_expand_head(skb, 0, 0,
+						      GFP_ATOMIC) != 0)) {
+				tq->stats.drop_tso++;
+				goto drop_pkt;
+			}
+			tq->stats.copy_skb_header++;
+		}
+		vmxnet3_prepare_tso(skb, &ctx);
+	} else {
+		if (unlikely(count > VMXNET3_MAX_TXD_PER_PKT)) {
+
+			/* non-tso pkts must not use more than
+			 * VMXNET3_MAX_TXD_PER_PKT entries
+			 */
+			if (skb_linearize(skb) != 0) {
+				tq->stats.drop_too_many_frags++;
+				goto drop_pkt;
+			}
+			tq->stats.linearized++;
+
+			/* recalculate the # of descriptors to use */
+			count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1;
+		}
+	}
+
+	ret = vmxnet3_parse_and_copy_hdr(skb, tq, &ctx, adapter);
+	if (ret >= 0) {
+		BUG_ON(ret <= 0 && ctx.copy_size != 0);
+		/* hdrs parsed, check against other limits */
+		if (ctx.mss) {
+			if (unlikely(ctx.eth_ip_hdr_size + ctx.l4_hdr_size >
+				     VMXNET3_MAX_TX_BUF_SIZE)) {
+				goto hdr_too_big;
+			}
+		} else {
+			if (skb->ip_summed == CHECKSUM_PARTIAL) {
+				if (unlikely(ctx.eth_ip_hdr_size +
+					     skb->csum_offset >
+					     VMXNET3_MAX_CSUM_OFFSET)) {
+					goto hdr_too_big;
+				}
+			}
+		}
+	} else {
+		tq->stats.drop_hdr_inspect_err++;
+		goto drop_pkt;
+	}
+
+	spin_lock_irqsave(&tq->tx_lock, flags);
+
+	if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) {
+		tq->stats.tx_ring_full++;
+		dev_dbg(&adapter->netdev->dev,
+			"tx queue stopped on %s, next2comp %u"
+			" next2fill %u\n", adapter->netdev->name,
+			tq->tx_ring.next2comp, tq->tx_ring.next2fill);
+
+		vmxnet3_tq_stop(tq, adapter);
+		spin_unlock_irqrestore(&tq->tx_lock, flags);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* fill tx descs related to addr & len */
+	vmxnet3_map_pkt(skb, &ctx, tq, adapter->pdev, adapter);
+
+	/* setup the EOP desc */
+	ctx.eop_txd->dword[3] = VMXNET3_TXD_CQ | VMXNET3_TXD_EOP;
+
+	/* setup the SOP desc */
+	gdesc = ctx.sop_txd;
+	if (ctx.mss) {
+		gdesc->txd.hlen = ctx.eth_ip_hdr_size + ctx.l4_hdr_size;
+		gdesc->txd.om = VMXNET3_OM_TSO;
+		gdesc->txd.msscof = ctx.mss;
+		tq->shared->txNumDeferred += (skb->len - gdesc->txd.hlen +
+					     ctx.mss - 1) / ctx.mss;
+	} else {
+		if (skb->ip_summed == CHECKSUM_PARTIAL) {
+			gdesc->txd.hlen = ctx.eth_ip_hdr_size;
+			gdesc->txd.om = VMXNET3_OM_CSUM;
+			gdesc->txd.msscof = ctx.eth_ip_hdr_size +
+					    skb->csum_offset;
+		} else {
+			gdesc->txd.om = 0;
+			gdesc->txd.msscof = 0;
+		}
+		tq->shared->txNumDeferred++;
+	}
+
+	if (vlan_tx_tag_present(skb)) {
+		gdesc->txd.ti = 1;
+		gdesc->txd.tci = vlan_tx_tag_get(skb);
+	}
+
+	wmb();
+
+	/* finally flips the GEN bit of the SOP desc */
+	gdesc->dword[2] ^= VMXNET3_TXD_GEN;
+	dev_dbg(&adapter->netdev->dev,
+		"txd[%u]: SOP 0x%Lx 0x%x 0x%x\n",
+		(u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd -
+		tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2],
+		gdesc->dword[3]);
+
+	spin_unlock_irqrestore(&tq->tx_lock, flags);
+
+	if (tq->shared->txNumDeferred >= tq->shared->txThreshold) {
+		tq->shared->txNumDeferred = 0;
+		VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_TXPROD,
+				       tq->tx_ring.next2fill);
+	}
+	netdev->trans_start = jiffies;
+
+	return NETDEV_TX_OK;
+
+hdr_too_big:
+	tq->stats.drop_oversized_hdr++;
+drop_pkt:
+	tq->stats.drop_total++;
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+
+static netdev_tx_t
+vmxnet3_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	struct vmxnet3_tx_queue *tq = &adapter->tx_queue;
+
+	return vmxnet3_tq_xmit(skb, tq, adapter, netdev);
+}
+
+
+static void
+vmxnet3_rx_csum(struct vmxnet3_adapter *adapter,
+		struct sk_buff *skb,
+		union Vmxnet3_GenericDesc *gdesc)
+{
+	if (!gdesc->rcd.cnc && adapter->rxcsum) {
+		/* typical case: TCP/UDP over IP and both csums are correct */
+		if ((gdesc->dword[3] & VMXNET3_RCD_CSUM_OK) ==
+							VMXNET3_RCD_CSUM_OK) {
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+			BUG_ON(!(gdesc->rcd.tcp || gdesc->rcd.udp));
+			BUG_ON(!(gdesc->rcd.v4  || gdesc->rcd.v6));
+			BUG_ON(gdesc->rcd.frg);
+		} else {
+			if (gdesc->rcd.csum) {
+				skb->csum = htons(gdesc->rcd.csum);
+				skb->ip_summed = CHECKSUM_PARTIAL;
+			} else {
+				skb->ip_summed = CHECKSUM_NONE;
+			}
+		}
+	} else {
+		skb->ip_summed = CHECKSUM_NONE;
+	}
+}
+
+
+static void
+vmxnet3_rx_error(struct vmxnet3_rx_queue *rq, struct Vmxnet3_RxCompDesc *rcd,
+		 struct vmxnet3_rx_ctx *ctx,  struct vmxnet3_adapter *adapter)
+{
+	rq->stats.drop_err++;
+	if (!rcd->fcs)
+		rq->stats.drop_fcs++;
+
+	rq->stats.drop_total++;
+
+	/*
+	 * We do not unmap and chain the rx buffer to the skb.
+	 * We basically pretend this buffer is not used and will be recycled
+	 * by vmxnet3_rq_alloc_rx_buf()
+	 */
+
+	/*
+	 * ctx->skb may be NULL if this is the first and the only one
+	 * desc for the pkt
+	 */
+	if (ctx->skb)
+		dev_kfree_skb_irq(ctx->skb);
+
+	ctx->skb = NULL;
+}
+
+
+static int
+vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
+		       struct vmxnet3_adapter *adapter, int quota)
+{
+	static u32 rxprod_reg[2] = {VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2};
+	u32 num_rxd = 0;
+	struct Vmxnet3_RxCompDesc *rcd;
+	struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx;
+
+	rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd;
+	while (rcd->gen == rq->comp_ring.gen) {
+		struct vmxnet3_rx_buf_info *rbi;
+		struct sk_buff *skb;
+		int num_to_alloc;
+		struct Vmxnet3_RxDesc *rxd;
+		u32 idx, ring_idx;
+
+		if (num_rxd >= quota) {
+			/* we may stop even before we see the EOP desc of
+			 * the current pkt
+			 */
+			break;
+		}
+		num_rxd++;
+
+		idx = rcd->rxdIdx;
+		ring_idx = rcd->rqID == rq->qid ? 0 : 1;
+
+		rxd = &rq->rx_ring[ring_idx].base[idx].rxd;
+		rbi = rq->buf_info[ring_idx] + idx;
+
+		BUG_ON(rxd->addr != rbi->dma_addr || rxd->len != rbi->len);
+
+		if (unlikely(rcd->eop && rcd->err)) {
+			vmxnet3_rx_error(rq, rcd, ctx, adapter);
+			goto rcd_done;
+		}
+
+		if (rcd->sop) { /* first buf of the pkt */
+			BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_HEAD ||
+			       rcd->rqID != rq->qid);
+
+			BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_SKB);
+			BUG_ON(ctx->skb != NULL || rbi->skb == NULL);
+
+			if (unlikely(rcd->len == 0)) {
+				/* Pretend the rx buffer is skipped. */
+				BUG_ON(!(rcd->sop && rcd->eop));
+				dev_dbg(&adapter->netdev->dev,
+					"rxRing[%u][%u] 0 length\n",
+					ring_idx, idx);
+				goto rcd_done;
+			}
+
+			ctx->skb = rbi->skb;
+			rbi->skb = NULL;
+
+			pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len,
+					 PCI_DMA_FROMDEVICE);
+
+			skb_put(ctx->skb, rcd->len);
+		} else {
+			BUG_ON(ctx->skb == NULL);
+			/* non SOP buffer must be type 1 in most cases */
+			if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) {
+				BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY);
+
+				if (rcd->len) {
+					pci_unmap_page(adapter->pdev,
+						       rbi->dma_addr, rbi->len,
+						       PCI_DMA_FROMDEVICE);
+
+					vmxnet3_append_frag(ctx->skb, rcd, rbi);
+					rbi->page = NULL;
+				}
+			} else {
+				/*
+				 * The only time a non-SOP buffer is type 0 is
+				 * when it's EOP and error flag is raised, which
+				 * has already been handled.
+				 */
+				BUG_ON(true);
+			}
+		}
+
+		skb = ctx->skb;
+		if (rcd->eop) {
+			skb->len += skb->data_len;
+			skb->truesize += skb->data_len;
+
+			vmxnet3_rx_csum(adapter, skb,
+					(union Vmxnet3_GenericDesc *)rcd);
+			skb->protocol = eth_type_trans(skb, adapter->netdev);
+
+			if (unlikely(adapter->vlan_grp && rcd->ts)) {
+				vlan_hwaccel_receive_skb(skb,
+						adapter->vlan_grp, rcd->tci);
+			} else {
+				netif_receive_skb(skb);
+			}
+
+			adapter->netdev->last_rx = jiffies;
+			ctx->skb = NULL;
+		}
+
+rcd_done:
+		/* device may skip some rx descs */
+		rq->rx_ring[ring_idx].next2comp = idx;
+		VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp,
+					  rq->rx_ring[ring_idx].size);
+
+		/* refill rx buffers frequently to avoid starving the h/w */
+		num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring +
+							   ring_idx);
+		if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq,
+							ring_idx, adapter))) {
+			vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc,
+						adapter);
+
+			/* if needed, update the register */
+			if (unlikely(rq->shared->updateRxProd)) {
+				VMXNET3_WRITE_BAR0_REG(adapter,
+					rxprod_reg[ring_idx] + rq->qid * 8,
+					rq->rx_ring[ring_idx].next2fill);
+				rq->uncommitted[ring_idx] = 0;
+			}
+		}
+
+		vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring);
+		rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd;
+	}
+
+	return num_rxd;
+}
+
+
+static void
+vmxnet3_rq_cleanup(struct vmxnet3_rx_queue *rq,
+		   struct vmxnet3_adapter *adapter)
+{
+	u32 i, ring_idx;
+	struct Vmxnet3_RxDesc *rxd;
+
+	for (ring_idx = 0; ring_idx < 2; ring_idx++) {
+		for (i = 0; i < rq->rx_ring[ring_idx].size; i++) {
+			rxd = &rq->rx_ring[ring_idx].base[i].rxd;
+
+			if (rxd->btype == VMXNET3_RXD_BTYPE_HEAD &&
+					rq->buf_info[ring_idx][i].skb) {
+				pci_unmap_single(adapter->pdev, rxd->addr,
+						 rxd->len, PCI_DMA_FROMDEVICE);
+				dev_kfree_skb(rq->buf_info[ring_idx][i].skb);
+				rq->buf_info[ring_idx][i].skb = NULL;
+			} else if (rxd->btype == VMXNET3_RXD_BTYPE_BODY &&
+					rq->buf_info[ring_idx][i].page) {
+				pci_unmap_page(adapter->pdev, rxd->addr,
+					       rxd->len, PCI_DMA_FROMDEVICE);
+				put_page(rq->buf_info[ring_idx][i].page);
+				rq->buf_info[ring_idx][i].page = NULL;
+			}
+		}
+
+		rq->rx_ring[ring_idx].gen = VMXNET3_INIT_GEN;
+		rq->rx_ring[ring_idx].next2fill =
+					rq->rx_ring[ring_idx].next2comp = 0;
+		rq->uncommitted[ring_idx] = 0;
+	}
+
+	rq->comp_ring.gen = VMXNET3_INIT_GEN;
+	rq->comp_ring.next2proc = 0;
+}
+
+
+void vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq,
+			struct vmxnet3_adapter *adapter)
+{
+	int i;
+	int j;
+
+	/* all rx buffers must have already been freed */
+	for (i = 0; i < 2; i++) {
+		if (rq->buf_info[i]) {
+			for (j = 0; j < rq->rx_ring[i].size; j++)
+				BUG_ON(rq->buf_info[i][j].page != NULL);
+		}
+	}
+
+
+	kfree(rq->buf_info[0]);
+
+	for (i = 0; i < 2; i++) {
+		if (rq->rx_ring[i].base) {
+			pci_free_consistent(adapter->pdev, rq->rx_ring[i].size
+					    * sizeof(struct Vmxnet3_RxDesc),
+					    rq->rx_ring[i].base,
+					    rq->rx_ring[i].basePA);
+			rq->rx_ring[i].base = NULL;
+		}
+		rq->buf_info[i] = NULL;
+	}
+
+	if (rq->comp_ring.base) {
+		pci_free_consistent(adapter->pdev, rq->comp_ring.size *
+				    sizeof(struct Vmxnet3_RxCompDesc),
+				    rq->comp_ring.base, rq->comp_ring.basePA);
+		rq->comp_ring.base = NULL;
+	}
+}
+
+
+static int
+vmxnet3_rq_init(struct vmxnet3_rx_queue *rq,
+		struct vmxnet3_adapter  *adapter)
+{
+	int i;
+
+	/* initialize buf_info */
+	for (i = 0; i < rq->rx_ring[0].size; i++) {
+
+		/* 1st buf for a pkt is skbuff */
+		if (i % adapter->rx_buf_per_pkt == 0) {
+			rq->buf_info[0][i].buf_type = VMXNET3_RX_BUF_SKB;
+			rq->buf_info[0][i].len = adapter->skb_buf_size;
+		} else { /* subsequent bufs for a pkt is frag */
+			rq->buf_info[0][i].buf_type = VMXNET3_RX_BUF_PAGE;
+			rq->buf_info[0][i].len = PAGE_SIZE;
+		}
+	}
+	for (i = 0; i < rq->rx_ring[1].size; i++) {
+		rq->buf_info[1][i].buf_type = VMXNET3_RX_BUF_PAGE;
+		rq->buf_info[1][i].len = PAGE_SIZE;
+	}
+
+	/* reset internal state and allocate buffers for both rings */
+	for (i = 0; i < 2; i++) {
+		rq->rx_ring[i].next2fill = rq->rx_ring[i].next2comp = 0;
+		rq->uncommitted[i] = 0;
+
+		memset(rq->rx_ring[i].base, 0, rq->rx_ring[i].size *
+		       sizeof(struct Vmxnet3_RxDesc));
+		rq->rx_ring[i].gen = VMXNET3_INIT_GEN;
+	}
+	if (vmxnet3_rq_alloc_rx_buf(rq, 0, rq->rx_ring[0].size - 1,
+				    adapter) == 0) {
+		/* at least has 1 rx buffer for the 1st ring */
+		return -ENOMEM;
+	}
+	vmxnet3_rq_alloc_rx_buf(rq, 1, rq->rx_ring[1].size - 1, adapter);
+
+	/* reset the comp ring */
+	rq->comp_ring.next2proc = 0;
+	memset(rq->comp_ring.base, 0, rq->comp_ring.size *
+	       sizeof(struct Vmxnet3_RxCompDesc));
+	rq->comp_ring.gen = VMXNET3_INIT_GEN;
+
+	/* reset rxctx */
+	rq->rx_ctx.skb = NULL;
+
+	/* stats are not reset */
+	return 0;
+}
+
+
+static int
+vmxnet3_rq_create(struct vmxnet3_rx_queue *rq, struct vmxnet3_adapter *adapter)
+{
+	int i;
+	size_t sz;
+	struct vmxnet3_rx_buf_info *bi;
+
+	for (i = 0; i < 2; i++) {
+
+		sz = rq->rx_ring[i].size * sizeof(struct Vmxnet3_RxDesc);
+		rq->rx_ring[i].base = pci_alloc_consistent(adapter->pdev, sz,
+							&rq->rx_ring[i].basePA);
+		if (!rq->rx_ring[i].base) {
+			printk(KERN_ERR "%s: failed to allocate rx ring %d\n",
+			       adapter->netdev->name, i);
+			goto err;
+		}
+	}
+
+	sz = rq->comp_ring.size * sizeof(struct Vmxnet3_RxCompDesc);
+	rq->comp_ring.base = pci_alloc_consistent(adapter->pdev, sz,
+						  &rq->comp_ring.basePA);
+	if (!rq->comp_ring.base) {
+		printk(KERN_ERR "%s: failed to allocate rx comp ring\n",
+		       adapter->netdev->name);
+		goto err;
+	}
+
+	sz = sizeof(struct vmxnet3_rx_buf_info) * (rq->rx_ring[0].size +
+						   rq->rx_ring[1].size);
+	bi = kmalloc(sz, GFP_KERNEL);
+	if (!bi) {
+		printk(KERN_ERR "%s: failed to allocate rx bufinfo\n",
+		       adapter->netdev->name);
+		goto err;
+	}
+	memset(bi, 0, sz);
+	rq->buf_info[0] = bi;
+	rq->buf_info[1] = bi + rq->rx_ring[0].size;
+
+	return 0;
+
+err:
+	vmxnet3_rq_destroy(rq, adapter);
+	return -ENOMEM;
+}
+
+
+static int
+vmxnet3_do_poll(struct vmxnet3_adapter *adapter, int budget)
+{
+	if (unlikely(adapter->shared->ecr))
+		vmxnet3_process_events(adapter);
+
+	vmxnet3_tq_tx_complete(&adapter->tx_queue, adapter);
+	return vmxnet3_rq_rx_complete(&adapter->rx_queue, adapter, budget);
+}
+
+
+static int
+vmxnet3_poll(struct napi_struct *napi, int budget)
+{
+	struct vmxnet3_adapter *adapter = container_of(napi,
+					  struct vmxnet3_adapter, napi);
+	int rxd_done;
+
+	rxd_done = vmxnet3_do_poll(adapter, budget);
+
+	if (rxd_done < budget) {
+		napi_complete(napi);
+		vmxnet3_enable_intr(adapter, 0);
+	}
+	return rxd_done;
+}
+
+
+/* Interrupt handler for vmxnet3  */
+static irqreturn_t
+vmxnet3_intr(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct vmxnet3_adapter *adapter = netdev_priv(dev);
+
+	if (unlikely(adapter->intr.type == VMXNET3_IT_INTX)) {
+		u32 icr = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_ICR);
+		if (unlikely(icr == 0))
+			/* not ours */
+			return IRQ_NONE;
+	}
+
+
+	/* disable intr if needed */
+	if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE)
+		vmxnet3_disable_intr(adapter, 0);
+
+	napi_schedule(&adapter->napi);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+
+
+/* netpoll callback. */
+static void
+vmxnet3_netpoll(struct net_device *netdev)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	int irq;
+
+#ifdef CONFIG_PCI_MSI
+	if (adapter->intr.type == VMXNET3_IT_MSIX)
+		irq = adapter->intr.msix_entries[0].vector;
+	else
+#endif
+		irq = adapter->pdev->irq;
+
+	disable_irq(irq);
+	vmxnet3_intr(irq, netdev);
+	enable_irq(irq);
+}
+#endif
+
+static int
+vmxnet3_request_irqs(struct vmxnet3_adapter *adapter)
+{
+	int err;
+
+#ifdef CONFIG_PCI_MSI
+	if (adapter->intr.type == VMXNET3_IT_MSIX) {
+		/* we only use 1 MSI-X vector */
+		err = request_irq(adapter->intr.msix_entries[0].vector,
+				  vmxnet3_intr, 0, adapter->netdev->name,
+				  adapter->netdev);
+	} else
+#endif
+	if (adapter->intr.type == VMXNET3_IT_MSI) {
+		err = request_irq(adapter->pdev->irq, vmxnet3_intr, 0,
+				  adapter->netdev->name, adapter->netdev);
+	} else {
+		err = request_irq(adapter->pdev->irq, vmxnet3_intr,
+				  IRQF_SHARED, adapter->netdev->name,
+				  adapter->netdev);
+	}
+
+	if (err)
+		printk(KERN_ERR "Failed to request irq %s (intr type:%d), error"
+		       ":%d\n", adapter->netdev->name, adapter->intr.type, err);
+
+
+	if (!err) {
+		int i;
+		/* init our intr settings */
+		for (i = 0; i < adapter->intr.num_intrs; i++)
+			adapter->intr.mod_levels[i] = UPT1_IML_ADAPTIVE;
+
+		/* next setup intr index for all intr sources */
+		adapter->tx_queue.comp_ring.intr_idx = 0;
+		adapter->rx_queue.comp_ring.intr_idx = 0;
+		adapter->intr.event_intr_idx = 0;
+
+		printk(KERN_INFO "%s: intr type %u, mode %u, %u vectors "
+		       "allocated\n", adapter->netdev->name, adapter->intr.type,
+		       adapter->intr.mask_mode, adapter->intr.num_intrs);
+	}
+
+	return err;
+}
+
+
+static void
+vmxnet3_free_irqs(struct vmxnet3_adapter *adapter)
+{
+	BUG_ON(adapter->intr.type == VMXNET3_IT_AUTO ||
+	       adapter->intr.num_intrs <= 0);
+
+	switch (adapter->intr.type) {
+#ifdef CONFIG_PCI_MSI
+	case VMXNET3_IT_MSIX:
+	{
+		int i;
+
+		for (i = 0; i < adapter->intr.num_intrs; i++)
+			free_irq(adapter->intr.msix_entries[i].vector,
+				 adapter->netdev);
+		break;
+	}
+#endif
+	case VMXNET3_IT_MSI:
+		free_irq(adapter->pdev->irq, adapter->netdev);
+		break;
+	case VMXNET3_IT_INTX:
+		free_irq(adapter->pdev->irq, adapter->netdev);
+		break;
+	default:
+		BUG_ON(true);
+	}
+}
+
+
+static void
+vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	struct Vmxnet3_DriverShared *shared = adapter->shared;
+	u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+
+	if (grp) {
+		/* add vlan rx stripping. */
+		if (adapter->netdev->features & NETIF_F_HW_VLAN_RX) {
+			int i;
+			struct Vmxnet3_DSDevRead *devRead = &shared->devRead;
+			adapter->vlan_grp = grp;
+
+			/* update FEATURES to device */
+			devRead->misc.uptFeatures |= UPT1_F_RXVLAN;
+			VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+					       VMXNET3_CMD_UPDATE_FEATURE);
+			/*
+			 *  Clear entire vfTable; then enable untagged pkts.
+			 *  Note: setting one entry in vfTable to non-zero turns
+			 *  on VLAN rx filtering.
+			 */
+			for (i = 0; i < VMXNET3_VFT_SIZE; i++)
+				vfTable[i] = 0;
+
+			VMXNET3_SET_VFTABLE_ENTRY(vfTable, 0);
+			VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+					       VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+		} else {
+			printk(KERN_ERR "%s: vlan_rx_register when device has "
+			       "no NETIF_F_HW_VLAN_RX\n", netdev->name);
+		}
+	} else {
+		/* remove vlan rx stripping. */
+		struct Vmxnet3_DSDevRead *devRead = &shared->devRead;
+		adapter->vlan_grp = NULL;
+
+		if (devRead->misc.uptFeatures & UPT1_F_RXVLAN) {
+			int i;
+
+			for (i = 0; i < VMXNET3_VFT_SIZE; i++) {
+				/* clear entire vfTable; this also disables
+				 * VLAN rx filtering
+				 */
+				vfTable[i] = 0;
+			}
+			VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+					       VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+
+			/* update FEATURES to device */
+			devRead->misc.uptFeatures &= ~UPT1_F_RXVLAN;
+			VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+					       VMXNET3_CMD_UPDATE_FEATURE);
+		}
+	}
+}
+
+
+static void
+vmxnet3_restore_vlan(struct vmxnet3_adapter *adapter)
+{
+	if (adapter->vlan_grp) {
+		u16 vid;
+		u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+		bool activeVlan = false;
+
+		for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+			if (vlan_group_get_device(adapter->vlan_grp, vid)) {
+				VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
+				activeVlan = true;
+			}
+		}
+		if (activeVlan) {
+			/* continue to allow untagged pkts */
+			VMXNET3_SET_VFTABLE_ENTRY(vfTable, 0);
+		}
+	}
+}
+
+
+static void
+vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+
+	VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+			       VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+}
+
+
+static void
+vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+
+	VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+			       VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+}
+
+
+static u8 *
+vmxnet3_copy_mc(struct net_device *netdev)
+{
+	u8 *buf = NULL;
+	u32 sz = netdev->mc_count * ETH_ALEN;
+
+	/* struct Vmxnet3_RxFilterConf.mfTableLen is u16. */
+	if (sz <= 0xffff) {
+		/* We may be called with BH disabled */
+		buf = kmalloc(sz, GFP_ATOMIC);
+		if (buf) {
+			int i;
+			struct dev_mc_list *mc = netdev->mc_list;
+
+			for (i = 0; i < netdev->mc_count; i++) {
+				BUG_ON(!mc);
+				memcpy(buf + i * ETH_ALEN, mc->dmi_addr,
+				       ETH_ALEN);
+				mc = mc->next;
+			}
+		}
+	}
+	return buf;
+}
+
+
+static void
+vmxnet3_set_mc(struct net_device *netdev)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	struct Vmxnet3_RxFilterConf *rxConf =
+					&adapter->shared->devRead.rxFilterConf;
+	u8 *new_table = NULL;
+	u32 new_mode = VMXNET3_RXM_UCAST;
+
+	if (netdev->flags & IFF_PROMISC)
+		new_mode |= VMXNET3_RXM_PROMISC;
+
+	if (netdev->flags & IFF_BROADCAST)
+		new_mode |= VMXNET3_RXM_BCAST;
+
+	if (netdev->flags & IFF_ALLMULTI)
+		new_mode |= VMXNET3_RXM_ALL_MULTI;
+	else
+		if (netdev->mc_count > 0) {
+			new_table = vmxnet3_copy_mc(netdev);
+			if (new_table) {
+				new_mode |= VMXNET3_RXM_MCAST;
+				rxConf->mfTableLen = netdev->mc_count *
+						     ETH_ALEN;
+				rxConf->mfTablePA = virt_to_phys(new_table);
+			} else {
+				printk(KERN_INFO "%s: failed to copy mcast list"
+				       ", setting ALL_MULTI\n", netdev->name);
+				new_mode |= VMXNET3_RXM_ALL_MULTI;
+			}
+		}
+
+
+	if (!(new_mode & VMXNET3_RXM_MCAST)) {
+		rxConf->mfTableLen = 0;
+		rxConf->mfTablePA = 0;
+	}
+
+	if (new_mode != rxConf->rxMode) {
+		rxConf->rxMode = new_mode;
+		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+				       VMXNET3_CMD_UPDATE_RX_MODE);
+	}
+
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+			       VMXNET3_CMD_UPDATE_MAC_FILTERS);
+
+	kfree(new_table);
+}
+
+
+/*
+ *   Set up driver_shared based on settings in adapter.
+ */
+
+static void
+vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter)
+{
+	struct Vmxnet3_DriverShared *shared = adapter->shared;
+	struct Vmxnet3_DSDevRead *devRead = &shared->devRead;
+	struct Vmxnet3_TxQueueConf *tqc;
+	struct Vmxnet3_RxQueueConf *rqc;
+	int i;
+
+	memset(shared, 0, sizeof(*shared));
+
+	/* driver settings */
+	shared->magic = VMXNET3_REV1_MAGIC;
+	devRead->misc.driverInfo.version = VMXNET3_DRIVER_VERSION_NUM;
+	devRead->misc.driverInfo.gos.gosBits = (sizeof(void *) == 4 ?
+				VMXNET3_GOS_BITS_32 : VMXNET3_GOS_BITS_64);
+	devRead->misc.driverInfo.gos.gosType = VMXNET3_GOS_TYPE_LINUX;
+	devRead->misc.driverInfo.vmxnet3RevSpt = 1;
+	devRead->misc.driverInfo.uptVerSpt = 1;
+
+	devRead->misc.ddPA = virt_to_phys(adapter);
+	devRead->misc.ddLen = sizeof(struct vmxnet3_adapter);
+
+	/* set up feature flags */
+	if (adapter->rxcsum)
+		devRead->misc.uptFeatures |= UPT1_F_RXCSUM;
+
+	if (adapter->lro) {
+		devRead->misc.uptFeatures |= UPT1_F_LRO;
+		devRead->misc.maxNumRxSG = 1 + MAX_SKB_FRAGS;
+	}
+	if ((adapter->netdev->features & NETIF_F_HW_VLAN_RX)
+			&& adapter->vlan_grp) {
+		devRead->misc.uptFeatures |= UPT1_F_RXVLAN;
+	}
+
+	devRead->misc.mtu = adapter->netdev->mtu;
+	devRead->misc.queueDescPA = adapter->queue_desc_pa;
+	devRead->misc.queueDescLen = sizeof(struct Vmxnet3_TxQueueDesc) +
+				     sizeof(struct Vmxnet3_RxQueueDesc);
+
+	/* tx queue settings */
+	BUG_ON(adapter->tx_queue.tx_ring.base == NULL);
+
+	devRead->misc.numTxQueues = 1;
+	tqc = &adapter->tqd_start->conf;
+	tqc->txRingBasePA   = adapter->tx_queue.tx_ring.basePA;
+	tqc->dataRingBasePA = adapter->tx_queue.data_ring.basePA;
+	tqc->compRingBasePA = adapter->tx_queue.comp_ring.basePA;
+	tqc->ddPA           = virt_to_phys(adapter->tx_queue.buf_info);
+	tqc->txRingSize     = adapter->tx_queue.tx_ring.size;
+	tqc->dataRingSize   = adapter->tx_queue.data_ring.size;
+	tqc->compRingSize   = adapter->tx_queue.comp_ring.size;
+	tqc->ddLen          = sizeof(struct vmxnet3_tx_buf_info) *
+			      tqc->txRingSize;
+	tqc->intrIdx        = adapter->tx_queue.comp_ring.intr_idx;
+
+	/* rx queue settings */
+	devRead->misc.numRxQueues = 1;
+	rqc = &adapter->rqd_start->conf;
+	rqc->rxRingBasePA[0] = adapter->rx_queue.rx_ring[0].basePA;
+	rqc->rxRingBasePA[1] = adapter->rx_queue.rx_ring[1].basePA;
+	rqc->compRingBasePA  = adapter->rx_queue.comp_ring.basePA;
+	rqc->ddPA            = virt_to_phys(adapter->rx_queue.buf_info);
+	rqc->rxRingSize[0]   = adapter->rx_queue.rx_ring[0].size;
+	rqc->rxRingSize[1]   = adapter->rx_queue.rx_ring[1].size;
+	rqc->compRingSize    = adapter->rx_queue.comp_ring.size;
+	rqc->ddLen           = sizeof(struct vmxnet3_rx_buf_info) *
+			       (rqc->rxRingSize[0] + rqc->rxRingSize[1]);
+	rqc->intrIdx         = adapter->rx_queue.comp_ring.intr_idx;
+
+	/* intr settings */
+	devRead->intrConf.autoMask = adapter->intr.mask_mode ==
+				     VMXNET3_IMM_AUTO;
+	devRead->intrConf.numIntrs = adapter->intr.num_intrs;
+	for (i = 0; i < adapter->intr.num_intrs; i++)
+		devRead->intrConf.modLevels[i] = adapter->intr.mod_levels[i];
+
+	devRead->intrConf.eventIntrIdx = adapter->intr.event_intr_idx;
+
+	/* rx filter settings */
+	devRead->rxFilterConf.rxMode = 0;
+	vmxnet3_restore_vlan(adapter);
+	/* the rest are already zeroed */
+}
+
+
+int
+vmxnet3_activate_dev(struct vmxnet3_adapter *adapter)
+{
+	int err;
+	u32 ret;
+
+	dev_dbg(&adapter->netdev->dev,
+		"%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes"
+		" %u %u %u\n", adapter->netdev->name, adapter->skb_buf_size,
+		adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size,
+		adapter->rx_queue.rx_ring[0].size,
+		adapter->rx_queue.rx_ring[1].size);
+
+	vmxnet3_tq_init(&adapter->tx_queue, adapter);
+	err = vmxnet3_rq_init(&adapter->rx_queue, adapter);
+	if (err) {
+		printk(KERN_ERR "Failed to init rx queue for %s: error %d\n",
+		       adapter->netdev->name, err);
+		goto rq_err;
+	}
+
+	err = vmxnet3_request_irqs(adapter);
+	if (err) {
+		printk(KERN_ERR "Failed to setup irq for %s: error %d\n",
+		       adapter->netdev->name, err);
+		goto irq_err;
+	}
+
+	vmxnet3_setup_driver_shared(adapter);
+
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL,
+			       VMXNET3_GET_ADDR_LO(adapter->shared_pa));
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH,
+			       VMXNET3_GET_ADDR_HI(adapter->shared_pa));
+
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+			       VMXNET3_CMD_ACTIVATE_DEV);
+	ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
+
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to activate dev %s: error %u\n",
+		       adapter->netdev->name, ret);
+		err = -EINVAL;
+		goto activate_err;
+	}
+	VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD,
+			       adapter->rx_queue.rx_ring[0].next2fill);
+	VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD2,
+			       adapter->rx_queue.rx_ring[1].next2fill);
+
+	/* Apply the rx filter settins last. */
+	vmxnet3_set_mc(adapter->netdev);
+
+	/*
+	 * Check link state when first activating device. It will start the
+	 * tx queue if the link is up.
+	 */
+	vmxnet3_check_link(adapter);
+
+	napi_enable(&adapter->napi);
+	vmxnet3_enable_all_intrs(adapter);
+	clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
+	return 0;
+
+activate_err:
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL, 0);
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH, 0);
+	vmxnet3_free_irqs(adapter);
+irq_err:
+rq_err:
+	/* free up buffers we allocated */
+	vmxnet3_rq_cleanup(&adapter->rx_queue, adapter);
+	return err;
+}
+
+
+void
+vmxnet3_reset_dev(struct vmxnet3_adapter *adapter)
+{
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_RESET_DEV);
+}
+
+
+int
+vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter)
+{
+	if (test_and_set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state))
+		return 0;
+
+
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+			       VMXNET3_CMD_QUIESCE_DEV);
+	vmxnet3_disable_all_intrs(adapter);
+
+	napi_disable(&adapter->napi);
+	netif_tx_disable(adapter->netdev);
+	adapter->link_speed = 0;
+	netif_carrier_off(adapter->netdev);
+
+	vmxnet3_tq_cleanup(&adapter->tx_queue, adapter);
+	vmxnet3_rq_cleanup(&adapter->rx_queue, adapter);
+	vmxnet3_free_irqs(adapter);
+	return 0;
+}
+
+
+static void
+vmxnet3_write_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)
+{
+	u32 tmp;
+
+	tmp = *(u32 *)mac;
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_MACL, tmp);
+
+	tmp = (mac[5] << 8) | mac[4];
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_MACH, tmp);
+}
+
+
+static int
+vmxnet3_set_mac_addr(struct net_device *netdev, void *p)
+{
+	struct sockaddr *addr = p;
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	vmxnet3_write_mac_addr(adapter, addr->sa_data);
+
+	return 0;
+}
+
+
+/* ==================== initialization and cleanup routines ============ */
+
+static int
+vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter, bool *dma64)
+{
+	int err;
+	unsigned long mmio_start, mmio_len;
+	struct pci_dev *pdev = adapter->pdev;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR "Failed to enable adapter %s: error %d\n",
+		       pci_name(pdev), err);
+		return err;
+	}
+
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
+		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
+			printk(KERN_ERR "pci_set_consistent_dma_mask failed "
+			       "for adapter %s\n", pci_name(pdev));
+			err = -EIO;
+			goto err_set_mask;
+		}
+		*dma64 = true;
+	} else {
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
+			printk(KERN_ERR "pci_set_dma_mask failed for adapter "
+			       "%s\n",	pci_name(pdev));
+			err = -EIO;
+			goto err_set_mask;
+		}
+		*dma64 = false;
+	}
+
+	err = pci_request_selected_regions(pdev, (1 << 2) - 1,
+					   vmxnet3_driver_name);
+	if (err) {
+		printk(KERN_ERR "Failed to request region for adapter %s: "
+		       "error %d\n", pci_name(pdev), err);
+		goto err_set_mask;
+	}
+
+	pci_set_master(pdev);
+
+	mmio_start = pci_resource_start(pdev, 0);
+	mmio_len = pci_resource_len(pdev, 0);
+	adapter->hw_addr0 = ioremap(mmio_start, mmio_len);
+	if (!adapter->hw_addr0) {
+		printk(KERN_ERR "Failed to map bar0 for adapter %s\n",
+		       pci_name(pdev));
+		err = -EIO;
+		goto err_ioremap;
+	}
+
+	mmio_start = pci_resource_start(pdev, 1);
+	mmio_len = pci_resource_len(pdev, 1);
+	adapter->hw_addr1 = ioremap(mmio_start, mmio_len);
+	if (!adapter->hw_addr1) {
+		printk(KERN_ERR "Failed to map bar1 for adapter %s\n",
+		       pci_name(pdev));
+		err = -EIO;
+		goto err_bar1;
+	}
+	return 0;
+
+err_bar1:
+	iounmap(adapter->hw_addr0);
+err_ioremap:
+	pci_release_selected_regions(pdev, (1 << 2) - 1);
+err_set_mask:
+	pci_disable_device(pdev);
+	return err;
+}
+
+
+static void
+vmxnet3_free_pci_resources(struct vmxnet3_adapter *adapter)
+{
+	BUG_ON(!adapter->pdev);
+
+	iounmap(adapter->hw_addr0);
+	iounmap(adapter->hw_addr1);
+	pci_release_selected_regions(adapter->pdev, (1 << 2) - 1);
+	pci_disable_device(adapter->pdev);
+}
+
+
+static void
+vmxnet3_adjust_rx_ring_size(struct vmxnet3_adapter *adapter)
+{
+	size_t sz;
+
+	if (adapter->netdev->mtu <= VMXNET3_MAX_SKB_BUF_SIZE -
+				    VMXNET3_MAX_ETH_HDR_SIZE) {
+		adapter->skb_buf_size = adapter->netdev->mtu +
+					VMXNET3_MAX_ETH_HDR_SIZE;
+		if (adapter->skb_buf_size < VMXNET3_MIN_T0_BUF_SIZE)
+			adapter->skb_buf_size = VMXNET3_MIN_T0_BUF_SIZE;
+
+		adapter->rx_buf_per_pkt = 1;
+	} else {
+		adapter->skb_buf_size = VMXNET3_MAX_SKB_BUF_SIZE;
+		sz = adapter->netdev->mtu - VMXNET3_MAX_SKB_BUF_SIZE +
+					    VMXNET3_MAX_ETH_HDR_SIZE;
+		adapter->rx_buf_per_pkt = 1 + (sz + PAGE_SIZE - 1) / PAGE_SIZE;
+	}
+
+	/*
+	 * for simplicity, force the ring0 size to be a multiple of
+	 * rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN
+	 */
+	sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN;
+	adapter->rx_queue.rx_ring[0].size = (adapter->rx_queue.rx_ring[0].size +
+					     sz - 1) / sz * sz;
+	adapter->rx_queue.rx_ring[0].size = min_t(u32,
+					    adapter->rx_queue.rx_ring[0].size,
+					    VMXNET3_RX_RING_MAX_SIZE / sz * sz);
+}
+
+
+int
+vmxnet3_create_queues(struct vmxnet3_adapter *adapter, u32 tx_ring_size,
+		      u32 rx_ring_size, u32 rx_ring2_size)
+{
+	int err;
+
+	adapter->tx_queue.tx_ring.size   = tx_ring_size;
+	adapter->tx_queue.data_ring.size = tx_ring_size;
+	adapter->tx_queue.comp_ring.size = tx_ring_size;
+	adapter->tx_queue.shared = &adapter->tqd_start->ctrl;
+	adapter->tx_queue.stopped = true;
+	err = vmxnet3_tq_create(&adapter->tx_queue, adapter);
+	if (err)
+		return err;
+
+	adapter->rx_queue.rx_ring[0].size = rx_ring_size;
+	adapter->rx_queue.rx_ring[1].size = rx_ring2_size;
+	vmxnet3_adjust_rx_ring_size(adapter);
+	adapter->rx_queue.comp_ring.size  = adapter->rx_queue.rx_ring[0].size +
+					    adapter->rx_queue.rx_ring[1].size;
+	adapter->rx_queue.qid  = 0;
+	adapter->rx_queue.qid2 = 1;
+	adapter->rx_queue.shared = &adapter->rqd_start->ctrl;
+	err = vmxnet3_rq_create(&adapter->rx_queue, adapter);
+	if (err)
+		vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+
+	return err;
+}
+
+static int
+vmxnet3_open(struct net_device *netdev)
+{
+	struct vmxnet3_adapter *adapter;
+	int err;
+
+	adapter = netdev_priv(netdev);
+
+	spin_lock_init(&adapter->tx_queue.tx_lock);
+
+	err = vmxnet3_create_queues(adapter, VMXNET3_DEF_TX_RING_SIZE,
+				    VMXNET3_DEF_RX_RING_SIZE,
+				    VMXNET3_DEF_RX_RING_SIZE);
+	if (err)
+		goto queue_err;
+
+	err = vmxnet3_activate_dev(adapter);
+	if (err)
+		goto activate_err;
+
+	return 0;
+
+activate_err:
+	vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+	vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+queue_err:
+	return err;
+}
+
+
+static int
+vmxnet3_close(struct net_device *netdev)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+	/*
+	 * Reset_work may be in the middle of resetting the device, wait for its
+	 * completion.
+	 */
+	while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
+		msleep(1);
+
+	vmxnet3_quiesce_dev(adapter);
+
+	vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+	vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+
+	clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
+
+
+	return 0;
+}
+
+
+void
+vmxnet3_force_close(struct vmxnet3_adapter *adapter)
+{
+	/*
+	 * we must clear VMXNET3_STATE_BIT_RESETTING, otherwise
+	 * vmxnet3_close() will deadlock.
+	 */
+	BUG_ON(test_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state));
+
+	/* we need to enable NAPI, otherwise dev_close will deadlock */
+	napi_enable(&adapter->napi);
+	dev_close(adapter->netdev);
+}
+
+
+static int
+vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	int err = 0;
+
+	if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU)
+		return -EINVAL;
+
+	if (new_mtu > 1500 && !adapter->jumbo_frame)
+		return -EINVAL;
+
+	netdev->mtu = new_mtu;
+
+	/*
+	 * Reset_work may be in the middle of resetting the device, wait for its
+	 * completion.
+	 */
+	while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
+		msleep(1);
+
+	if (netif_running(netdev)) {
+		vmxnet3_quiesce_dev(adapter);
+		vmxnet3_reset_dev(adapter);
+
+		/* we need to re-create the rx queue based on the new mtu */
+		vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+		vmxnet3_adjust_rx_ring_size(adapter);
+		adapter->rx_queue.comp_ring.size  =
+					adapter->rx_queue.rx_ring[0].size +
+					adapter->rx_queue.rx_ring[1].size;
+		err = vmxnet3_rq_create(&adapter->rx_queue, adapter);
+		if (err) {
+			printk(KERN_ERR "%s: failed to re-create rx queue,"
+				" error %d. Closing it.\n", netdev->name, err);
+			goto out;
+		}
+
+		err = vmxnet3_activate_dev(adapter);
+		if (err) {
+			printk(KERN_ERR "%s: failed to re-activate, error %d. "
+				"Closing it\n", netdev->name, err);
+			goto out;
+		}
+	}
+
+out:
+	clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
+	if (err)
+		vmxnet3_force_close(adapter);
+
+	return err;
+}
+
+
+static void
+vmxnet3_declare_features(struct vmxnet3_adapter *adapter, bool dma64)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	netdev->features = NETIF_F_SG |
+		NETIF_F_HW_CSUM |
+		NETIF_F_HW_VLAN_TX |
+		NETIF_F_HW_VLAN_RX |
+		NETIF_F_HW_VLAN_FILTER |
+		NETIF_F_TSO |
+		NETIF_F_TSO6 |
+		NETIF_F_LRO;
+
+	printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro");
+
+	adapter->rxcsum = true;
+	adapter->jumbo_frame = true;
+	adapter->lro = true;
+
+	if (dma64) {
+		netdev->features |= NETIF_F_HIGHDMA;
+		printk(" highDMA");
+	}
+
+	netdev->vlan_features = netdev->features;
+	printk("\n");
+}
+
+
+static void
+vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)
+{
+	u32 tmp;
+
+	tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACL);
+	*(u32 *)mac = tmp;
+
+	tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACH);
+	mac[4] = tmp & 0xff;
+	mac[5] = (tmp >> 8) & 0xff;
+}
+
+
+static void
+vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
+{
+	u32 cfg;
+
+	/* intr settings */
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+			       VMXNET3_CMD_GET_CONF_INTR);
+	cfg = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
+	adapter->intr.type = cfg & 0x3;
+	adapter->intr.mask_mode = (cfg >> 2) & 0x3;
+
+	if (adapter->intr.type == VMXNET3_IT_AUTO) {
+		int err;
+
+#ifdef CONFIG_PCI_MSI
+		adapter->intr.msix_entries[0].entry = 0;
+		err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries,
+				      VMXNET3_LINUX_MAX_MSIX_VECT);
+		if (!err) {
+			adapter->intr.num_intrs = 1;
+			adapter->intr.type = VMXNET3_IT_MSIX;
+			return;
+		}
+#endif
+
+		err = pci_enable_msi(adapter->pdev);
+		if (!err) {
+			adapter->intr.num_intrs = 1;
+			adapter->intr.type = VMXNET3_IT_MSI;
+			return;
+		}
+	}
+
+	adapter->intr.type = VMXNET3_IT_INTX;
+
+	/* INT-X related setting */
+	adapter->intr.num_intrs = 1;
+}
+
+
+static void
+vmxnet3_free_intr_resources(struct vmxnet3_adapter *adapter)
+{
+	if (adapter->intr.type == VMXNET3_IT_MSIX)
+		pci_disable_msix(adapter->pdev);
+	else if (adapter->intr.type == VMXNET3_IT_MSI)
+		pci_disable_msi(adapter->pdev);
+	else
+		BUG_ON(adapter->intr.type != VMXNET3_IT_INTX);
+}
+
+
+static void
+vmxnet3_tx_timeout(struct net_device *netdev)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	adapter->tx_timeout_count++;
+
+	printk(KERN_ERR "%s: tx hang\n", adapter->netdev->name);
+	schedule_work(&adapter->work);
+}
+
+
+static void
+vmxnet3_reset_work(struct work_struct *data)
+{
+	struct vmxnet3_adapter *adapter;
+
+	adapter = container_of(data, struct vmxnet3_adapter, work);
+
+	/* if another thread is resetting the device, no need to proceed */
+	if (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
+		return;
+
+	/* if the device is closed, we must leave it alone */
+	if (netif_running(adapter->netdev)) {
+		printk(KERN_INFO "%s: resetting\n", adapter->netdev->name);
+		vmxnet3_quiesce_dev(adapter);
+		vmxnet3_reset_dev(adapter);
+		vmxnet3_activate_dev(adapter);
+	} else {
+		printk(KERN_INFO "%s: already closed\n", adapter->netdev->name);
+	}
+
+	clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
+}
+
+
+static int __devinit
+vmxnet3_probe_device(struct pci_dev *pdev,
+		     const struct pci_device_id *id)
+{
+	static const struct net_device_ops vmxnet3_netdev_ops = {
+		.ndo_open = vmxnet3_open,
+		.ndo_stop = vmxnet3_close,
+		.ndo_start_xmit = vmxnet3_xmit_frame,
+		.ndo_set_mac_address = vmxnet3_set_mac_addr,
+		.ndo_change_mtu = vmxnet3_change_mtu,
+		.ndo_get_stats = vmxnet3_get_stats,
+		.ndo_tx_timeout = vmxnet3_tx_timeout,
+		.ndo_set_multicast_list = vmxnet3_set_mc,
+		.ndo_vlan_rx_register = vmxnet3_vlan_rx_register,
+		.ndo_vlan_rx_add_vid = vmxnet3_vlan_rx_add_vid,
+		.ndo_vlan_rx_kill_vid = vmxnet3_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+		.ndo_poll_controller = vmxnet3_netpoll,
+#endif
+	};
+	int err;
+	bool dma64 = false; /* stupid gcc */
+	u32 ver;
+	struct net_device *netdev;
+	struct vmxnet3_adapter *adapter;
+	u8 mac[ETH_ALEN];
+
+	netdev = alloc_etherdev(sizeof(struct vmxnet3_adapter));
+	if (!netdev) {
+		printk(KERN_ERR "Failed to alloc ethernet device for adapter "
+			"%s\n",	pci_name(pdev));
+		return -ENOMEM;
+	}
+
+	pci_set_drvdata(pdev, netdev);
+	adapter = netdev_priv(netdev);
+	adapter->netdev = netdev;
+	adapter->pdev = pdev;
+
+	adapter->shared = pci_alloc_consistent(adapter->pdev,
+			  sizeof(struct Vmxnet3_DriverShared),
+			  &adapter->shared_pa);
+	if (!adapter->shared) {
+		printk(KERN_ERR "Failed to allocate memory for %s\n",
+			pci_name(pdev));
+		err = -ENOMEM;
+		goto err_alloc_shared;
+	}
+
+	adapter->tqd_start = pci_alloc_consistent(adapter->pdev,
+			     sizeof(struct Vmxnet3_TxQueueDesc) +
+			     sizeof(struct Vmxnet3_RxQueueDesc),
+			     &adapter->queue_desc_pa);
+
+	if (!adapter->tqd_start) {
+		printk(KERN_ERR "Failed to allocate memory for %s\n",
+			pci_name(pdev));
+		err = -ENOMEM;
+		goto err_alloc_queue_desc;
+	}
+	adapter->rqd_start = (struct Vmxnet3_RxQueueDesc *)(adapter->tqd_start
+							    + 1);
+
+	adapter->pm_conf = kmalloc(sizeof(struct Vmxnet3_PMConf), GFP_KERNEL);
+	if (adapter->pm_conf == NULL) {
+		printk(KERN_ERR "Failed to allocate memory for %s\n",
+			pci_name(pdev));
+		err = -ENOMEM;
+		goto err_alloc_pm;
+	}
+
+	err = vmxnet3_alloc_pci_resources(adapter, &dma64);
+	if (err < 0)
+		goto err_alloc_pci;
+
+	ver = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_VRRS);
+	if (ver & 1) {
+		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_VRRS, 1);
+	} else {
+		printk(KERN_ERR "Incompatible h/w version (0x%x) for adapter"
+		       " %s\n",	ver, pci_name(pdev));
+		err = -EBUSY;
+		goto err_ver;
+	}
+
+	ver = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_UVRS);
+	if (ver & 1) {
+		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_UVRS, 1);
+	} else {
+		printk(KERN_ERR "Incompatible upt version (0x%x) for "
+		       "adapter %s\n", ver, pci_name(pdev));
+		err = -EBUSY;
+		goto err_ver;
+	}
+
+	vmxnet3_declare_features(adapter, dma64);
+
+	adapter->dev_number = atomic_read(&devices_found);
+	vmxnet3_alloc_intr_resources(adapter);
+
+	vmxnet3_read_mac_addr(adapter, mac);
+	memcpy(netdev->dev_addr,  mac, netdev->addr_len);
+
+	netdev->netdev_ops = &vmxnet3_netdev_ops;
+	netdev->watchdog_timeo = 5 * HZ;
+	vmxnet3_set_ethtool_ops(netdev);
+
+	INIT_WORK(&adapter->work, vmxnet3_reset_work);
+
+	netif_napi_add(netdev, &adapter->napi, vmxnet3_poll, 64);
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+	err = register_netdev(netdev);
+
+	if (err) {
+		printk(KERN_ERR "Failed to register adapter %s\n",
+			pci_name(pdev));
+		goto err_register;
+	}
+
+	set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
+	atomic_inc(&devices_found);
+	return 0;
+
+err_register:
+	vmxnet3_free_intr_resources(adapter);
+err_ver:
+	vmxnet3_free_pci_resources(adapter);
+err_alloc_pci:
+	kfree(adapter->pm_conf);
+err_alloc_pm:
+	pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) +
+			    sizeof(struct Vmxnet3_RxQueueDesc),
+			    adapter->tqd_start, adapter->queue_desc_pa);
+err_alloc_queue_desc:
+	pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared),
+			    adapter->shared, adapter->shared_pa);
+err_alloc_shared:
+	pci_set_drvdata(pdev, NULL);
+	free_netdev(netdev);
+	return err;
+}
+
+
+static void __devexit
+vmxnet3_remove_device(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+	flush_scheduled_work();
+
+	unregister_netdev(netdev);
+
+	vmxnet3_free_intr_resources(adapter);
+	vmxnet3_free_pci_resources(adapter);
+	kfree(adapter->pm_conf);
+	pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) +
+			    sizeof(struct Vmxnet3_RxQueueDesc),
+			    adapter->tqd_start, adapter->queue_desc_pa);
+	pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared),
+			    adapter->shared, adapter->shared_pa);
+	free_netdev(netdev);
+}
+
+
+#ifdef CONFIG_PM
+
+static int
+vmxnet3_suspend(struct device *device)
+{
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	struct Vmxnet3_PMConf *pmConf;
+	struct ethhdr *ehdr;
+	struct arphdr *ahdr;
+	u8 *arpreq;
+	struct in_device *in_dev;
+	struct in_ifaddr *ifa;
+	int i = 0;
+
+	if (!netif_running(netdev))
+		return 0;
+
+	vmxnet3_disable_all_intrs(adapter);
+	vmxnet3_free_irqs(adapter);
+	vmxnet3_free_intr_resources(adapter);
+
+	netif_device_detach(netdev);
+	netif_stop_queue(netdev);
+
+	/* Create wake-up filters. */
+	pmConf = adapter->pm_conf;
+	memset(pmConf, 0, sizeof(*pmConf));
+
+	if (adapter->wol & WAKE_UCAST) {
+		pmConf->filters[i].patternSize = ETH_ALEN;
+		pmConf->filters[i].maskSize = 1;
+		memcpy(pmConf->filters[i].pattern, netdev->dev_addr, ETH_ALEN);
+		pmConf->filters[i].mask[0] = 0x3F; /* LSB ETH_ALEN bits */
+
+		pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER;
+		i++;
+	}
+
+	if (adapter->wol & WAKE_ARP) {
+		in_dev = in_dev_get(netdev);
+		if (!in_dev)
+			goto skip_arp;
+
+		ifa = (struct in_ifaddr *)in_dev->ifa_list;
+		if (!ifa)
+			goto skip_arp;
+
+		pmConf->filters[i].patternSize = ETH_HLEN + /* Ethernet header*/
+			sizeof(struct arphdr) +		/* ARP header */
+			2 * ETH_ALEN +		/* 2 Ethernet addresses*/
+			2 * sizeof(u32);	/*2 IPv4 addresses */
+		pmConf->filters[i].maskSize =
+			(pmConf->filters[i].patternSize - 1) / 8 + 1;
+
+		/* ETH_P_ARP in Ethernet header. */
+		ehdr = (struct ethhdr *)pmConf->filters[i].pattern;
+		ehdr->h_proto = htons(ETH_P_ARP);
+
+		/* ARPOP_REQUEST in ARP header. */
+		ahdr = (struct arphdr *)&pmConf->filters[i].pattern[ETH_HLEN];
+		ahdr->ar_op = htons(ARPOP_REQUEST);
+		arpreq = (u8 *)(ahdr + 1);
+
+		/* The Unicast IPv4 address in 'tip' field. */
+		arpreq += 2 * ETH_ALEN + sizeof(u32);
+		*(u32 *)arpreq = ifa->ifa_address;
+
+		/* The mask for the relevant bits. */
+		pmConf->filters[i].mask[0] = 0x00;
+		pmConf->filters[i].mask[1] = 0x30; /* ETH_P_ARP */
+		pmConf->filters[i].mask[2] = 0x30; /* ARPOP_REQUEST */
+		pmConf->filters[i].mask[3] = 0x00;
+		pmConf->filters[i].mask[4] = 0xC0; /* IPv4 TIP */
+		pmConf->filters[i].mask[5] = 0x03; /* IPv4 TIP */
+		in_dev_put(in_dev);
+
+		pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER;
+		i++;
+	}
+
+skip_arp:
+	if (adapter->wol & WAKE_MAGIC)
+		pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_MAGIC;
+
+	pmConf->numFilters = i;
+
+	adapter->shared->devRead.pmConfDesc.confVer = 1;
+	adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf);
+	adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf);
+
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+			       VMXNET3_CMD_UPDATE_PMCFG);
+
+	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, PMSG_SUSPEND),
+			adapter->wol);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, PMSG_SUSPEND));
+
+	return 0;
+}
+
+
+static int
+vmxnet3_resume(struct device *device)
+{
+	int err;
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	struct Vmxnet3_PMConf *pmConf;
+
+	if (!netif_running(netdev))
+		return 0;
+
+	/* Destroy wake-up filters. */
+	pmConf = adapter->pm_conf;
+	memset(pmConf, 0, sizeof(*pmConf));
+
+	adapter->shared->devRead.pmConfDesc.confVer = 1;
+	adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf);
+	adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf);
+
+	netif_device_attach(netdev);
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	err = pci_enable_device_mem(pdev);
+	if (err != 0)
+		return err;
+
+	pci_enable_wake(pdev, PCI_D0, 0);
+
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+			       VMXNET3_CMD_UPDATE_PMCFG);
+	vmxnet3_alloc_intr_resources(adapter);
+	vmxnet3_request_irqs(adapter);
+	vmxnet3_enable_all_intrs(adapter);
+
+	return 0;
+}
+
+static struct dev_pm_ops vmxnet3_pm_ops = {
+	.suspend = vmxnet3_suspend,
+	.resume = vmxnet3_resume,
+};
+#endif
+
+static struct pci_driver vmxnet3_driver = {
+	.name		= vmxnet3_driver_name,
+	.id_table	= vmxnet3_pciid_table,
+	.probe		= vmxnet3_probe_device,
+	.remove		= __devexit_p(vmxnet3_remove_device),
+#ifdef CONFIG_PM
+	.driver.pm	= &vmxnet3_pm_ops,
+#endif
+};
+
+
+static int __init
+vmxnet3_init_module(void)
+{
+	printk(KERN_INFO "%s - version %s\n", VMXNET3_DRIVER_DESC,
+		VMXNET3_DRIVER_VERSION_REPORT);
+	return pci_register_driver(&vmxnet3_driver);
+}
+
+module_init(vmxnet3_init_module);
+
+
+static void
+vmxnet3_exit_module(void)
+{
+	pci_unregister_driver(&vmxnet3_driver);
+}
+
+module_exit(vmxnet3_exit_module);
+
+MODULE_AUTHOR("VMware, Inc.");
+MODULE_DESCRIPTION(VMXNET3_DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(VMXNET3_DRIVER_VERSION_STRING);
diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c
new file mode 100644
index 000000000000..c2c15e4cafc7
--- /dev/null
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -0,0 +1,566 @@
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+
+#include "vmxnet3_int.h"
+
+struct vmxnet3_stat_desc {
+	char desc[ETH_GSTRING_LEN];
+	int  offset;
+};
+
+
+static u32
+vmxnet3_get_rx_csum(struct net_device *netdev)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	return adapter->rxcsum;
+}
+
+
+static int
+vmxnet3_set_rx_csum(struct net_device *netdev, u32 val)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+	if (adapter->rxcsum != val) {
+		adapter->rxcsum = val;
+		if (netif_running(netdev)) {
+			if (val)
+				adapter->shared->devRead.misc.uptFeatures |=
+								UPT1_F_RXCSUM;
+			else
+				adapter->shared->devRead.misc.uptFeatures &=
+								~UPT1_F_RXCSUM;
+
+			VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+					       VMXNET3_CMD_UPDATE_FEATURE);
+		}
+	}
+	return 0;
+}
+
+
+/* per tq stats maintained by the device */
+static const struct vmxnet3_stat_desc
+vmxnet3_tq_dev_stats[] = {
+	/* description,         offset */
+	{ "TSO pkts tx",        offsetof(struct UPT1_TxStats, TSOPktsTxOK) },
+	{ "TSO bytes tx",       offsetof(struct UPT1_TxStats, TSOBytesTxOK) },
+	{ "ucast pkts tx",      offsetof(struct UPT1_TxStats, ucastPktsTxOK) },
+	{ "ucast bytes tx",     offsetof(struct UPT1_TxStats, ucastBytesTxOK) },
+	{ "mcast pkts tx",      offsetof(struct UPT1_TxStats, mcastPktsTxOK) },
+	{ "mcast bytes tx",     offsetof(struct UPT1_TxStats, mcastBytesTxOK) },
+	{ "bcast pkts tx",      offsetof(struct UPT1_TxStats, bcastPktsTxOK) },
+	{ "bcast bytes tx",     offsetof(struct UPT1_TxStats, bcastBytesTxOK) },
+	{ "pkts tx err",        offsetof(struct UPT1_TxStats, pktsTxError) },
+	{ "pkts tx discard",    offsetof(struct UPT1_TxStats, pktsTxDiscard) },
+};
+
+/* per tq stats maintained by the driver */
+static const struct vmxnet3_stat_desc
+vmxnet3_tq_driver_stats[] = {
+	/* description,         offset */
+	{"drv dropped tx total", offsetof(struct vmxnet3_tq_driver_stats,
+					drop_total) },
+	{ "   too many frags",  offsetof(struct vmxnet3_tq_driver_stats,
+					drop_too_many_frags) },
+	{ "   giant hdr",       offsetof(struct vmxnet3_tq_driver_stats,
+					drop_oversized_hdr) },
+	{ "   hdr err",         offsetof(struct vmxnet3_tq_driver_stats,
+					drop_hdr_inspect_err) },
+	{ "   tso",             offsetof(struct vmxnet3_tq_driver_stats,
+					drop_tso) },
+	{ "ring full",          offsetof(struct vmxnet3_tq_driver_stats,
+					tx_ring_full) },
+	{ "pkts linearized",    offsetof(struct vmxnet3_tq_driver_stats,
+					linearized) },
+	{ "hdr cloned",         offsetof(struct vmxnet3_tq_driver_stats,
+					copy_skb_header) },
+	{ "giant hdr",          offsetof(struct vmxnet3_tq_driver_stats,
+					oversized_hdr) },
+};
+
+/* per rq stats maintained by the device */
+static const struct vmxnet3_stat_desc
+vmxnet3_rq_dev_stats[] = {
+	{ "LRO pkts rx",        offsetof(struct UPT1_RxStats, LROPktsRxOK) },
+	{ "LRO byte rx",        offsetof(struct UPT1_RxStats, LROBytesRxOK) },
+	{ "ucast pkts rx",      offsetof(struct UPT1_RxStats, ucastPktsRxOK) },
+	{ "ucast bytes rx",     offsetof(struct UPT1_RxStats, ucastBytesRxOK) },
+	{ "mcast pkts rx",      offsetof(struct UPT1_RxStats, mcastPktsRxOK) },
+	{ "mcast bytes rx",     offsetof(struct UPT1_RxStats, mcastBytesRxOK) },
+	{ "bcast pkts rx",      offsetof(struct UPT1_RxStats, bcastPktsRxOK) },
+	{ "bcast bytes rx",     offsetof(struct UPT1_RxStats, bcastBytesRxOK) },
+	{ "pkts rx out of buf", offsetof(struct UPT1_RxStats, pktsRxOutOfBuf) },
+	{ "pkts rx err",        offsetof(struct UPT1_RxStats, pktsRxError) },
+};
+
+/* per rq stats maintained by the driver */
+static const struct vmxnet3_stat_desc
+vmxnet3_rq_driver_stats[] = {
+	/* description,         offset */
+	{ "drv dropped rx total", offsetof(struct vmxnet3_rq_driver_stats,
+					   drop_total) },
+	{ "   err",            offsetof(struct vmxnet3_rq_driver_stats,
+					drop_err) },
+	{ "   fcs",            offsetof(struct vmxnet3_rq_driver_stats,
+					drop_fcs) },
+	{ "rx buf alloc fail", offsetof(struct vmxnet3_rq_driver_stats,
+					rx_buf_alloc_failure) },
+};
+
+/* gloabl stats maintained by the driver */
+static const struct vmxnet3_stat_desc
+vmxnet3_global_stats[] = {
+	/* description,         offset */
+	{ "tx timeout count",   offsetof(struct vmxnet3_adapter,
+					 tx_timeout_count) }
+};
+
+
+struct net_device_stats *
+vmxnet3_get_stats(struct net_device *netdev)
+{
+	struct vmxnet3_adapter *adapter;
+	struct vmxnet3_tq_driver_stats *drvTxStats;
+	struct vmxnet3_rq_driver_stats *drvRxStats;
+	struct UPT1_TxStats *devTxStats;
+	struct UPT1_RxStats *devRxStats;
+	struct net_device_stats *net_stats = &netdev->stats;
+
+	adapter = netdev_priv(netdev);
+
+	/* Collect the dev stats into the shared area */
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS);
+
+	/* Assuming that we have a single queue device */
+	devTxStats = &adapter->tqd_start->stats;
+	devRxStats = &adapter->rqd_start->stats;
+
+	/* Get access to the driver stats per queue */
+	drvTxStats = &adapter->tx_queue.stats;
+	drvRxStats = &adapter->rx_queue.stats;
+
+	memset(net_stats, 0, sizeof(*net_stats));
+
+	net_stats->rx_packets = devRxStats->ucastPktsRxOK +
+				devRxStats->mcastPktsRxOK +
+				devRxStats->bcastPktsRxOK;
+
+	net_stats->tx_packets = devTxStats->ucastPktsTxOK +
+				devTxStats->mcastPktsTxOK +
+				devTxStats->bcastPktsTxOK;
+
+	net_stats->rx_bytes = devRxStats->ucastBytesRxOK +
+			      devRxStats->mcastBytesRxOK +
+			      devRxStats->bcastBytesRxOK;
+
+	net_stats->tx_bytes = devTxStats->ucastBytesTxOK +
+			      devTxStats->mcastBytesTxOK +
+			      devTxStats->bcastBytesTxOK;
+
+	net_stats->rx_errors = devRxStats->pktsRxError;
+	net_stats->tx_errors = devTxStats->pktsTxError;
+	net_stats->rx_dropped = drvRxStats->drop_total;
+	net_stats->tx_dropped = drvTxStats->drop_total;
+	net_stats->multicast =  devRxStats->mcastPktsRxOK;
+
+	return net_stats;
+}
+
+static int
+vmxnet3_get_sset_count(struct net_device *netdev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return ARRAY_SIZE(vmxnet3_tq_dev_stats) +
+			ARRAY_SIZE(vmxnet3_tq_driver_stats) +
+			ARRAY_SIZE(vmxnet3_rq_dev_stats) +
+			ARRAY_SIZE(vmxnet3_rq_driver_stats) +
+			ARRAY_SIZE(vmxnet3_global_stats);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+
+static int
+vmxnet3_get_regs_len(struct net_device *netdev)
+{
+	return 20 * sizeof(u32);
+}
+
+
+static void
+vmxnet3_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+	strlcpy(drvinfo->driver, vmxnet3_driver_name, sizeof(drvinfo->driver));
+	drvinfo->driver[sizeof(drvinfo->driver) - 1] = '\0';
+
+	strlcpy(drvinfo->version, VMXNET3_DRIVER_VERSION_REPORT,
+		sizeof(drvinfo->version));
+	drvinfo->driver[sizeof(drvinfo->version) - 1] = '\0';
+
+	strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+	drvinfo->fw_version[sizeof(drvinfo->fw_version) - 1] = '\0';
+
+	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
+		ETHTOOL_BUSINFO_LEN);
+	drvinfo->n_stats = vmxnet3_get_sset_count(netdev, ETH_SS_STATS);
+	drvinfo->testinfo_len = 0;
+	drvinfo->eedump_len   = 0;
+	drvinfo->regdump_len  = vmxnet3_get_regs_len(netdev);
+}
+
+
+static void
+vmxnet3_get_strings(struct net_device *netdev, u32 stringset, u8 *buf)
+{
+	if (stringset == ETH_SS_STATS) {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) {
+			memcpy(buf, vmxnet3_tq_dev_stats[i].desc,
+			       ETH_GSTRING_LEN);
+			buf += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++) {
+			memcpy(buf, vmxnet3_tq_driver_stats[i].desc,
+			       ETH_GSTRING_LEN);
+			buf += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) {
+			memcpy(buf, vmxnet3_rq_dev_stats[i].desc,
+			       ETH_GSTRING_LEN);
+			buf += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++) {
+			memcpy(buf, vmxnet3_rq_driver_stats[i].desc,
+			       ETH_GSTRING_LEN);
+			buf += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++) {
+			memcpy(buf, vmxnet3_global_stats[i].desc,
+				ETH_GSTRING_LEN);
+			buf += ETH_GSTRING_LEN;
+		}
+	}
+}
+
+static u32
+vmxnet3_get_flags(struct net_device *netdev) {
+	return netdev->features;
+}
+
+static int
+vmxnet3_set_flags(struct net_device *netdev, u32 data) {
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	u8 lro_requested = (data & ETH_FLAG_LRO) == 0 ? 0 : 1;
+	u8 lro_present = (netdev->features & NETIF_F_LRO) == 0 ? 0 : 1;
+
+	if (lro_requested ^ lro_present) {
+		/* toggle the LRO feature*/
+		netdev->features ^= NETIF_F_LRO;
+
+		/* update harware LRO capability accordingly */
+		if (lro_requested)
+			adapter->shared->devRead.misc.uptFeatures &= UPT1_F_LRO;
+		else
+			adapter->shared->devRead.misc.uptFeatures &=
+								~UPT1_F_LRO;
+		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+				       VMXNET3_CMD_UPDATE_FEATURE);
+	}
+	return 0;
+}
+
+static void
+vmxnet3_get_ethtool_stats(struct net_device *netdev,
+			  struct ethtool_stats *stats, u64  *buf)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	u8 *base;
+	int i;
+
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS);
+
+	/* this does assume each counter is 64-bit wide */
+
+	base = (u8 *)&adapter->tqd_start->stats;
+	for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++)
+		*buf++ = *(u64 *)(base + vmxnet3_tq_dev_stats[i].offset);
+
+	base = (u8 *)&adapter->tx_queue.stats;
+	for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++)
+		*buf++ = *(u64 *)(base + vmxnet3_tq_driver_stats[i].offset);
+
+	base = (u8 *)&adapter->rqd_start->stats;
+	for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++)
+		*buf++ = *(u64 *)(base + vmxnet3_rq_dev_stats[i].offset);
+
+	base = (u8 *)&adapter->rx_queue.stats;
+	for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++)
+		*buf++ = *(u64 *)(base + vmxnet3_rq_driver_stats[i].offset);
+
+	base = (u8 *)adapter;
+	for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++)
+		*buf++ = *(u64 *)(base + vmxnet3_global_stats[i].offset);
+}
+
+
+static void
+vmxnet3_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	u32 *buf = p;
+
+	memset(p, 0, vmxnet3_get_regs_len(netdev));
+
+	regs->version = 1;
+
+	/* Update vmxnet3_get_regs_len if we want to dump more registers */
+
+	/* make each ring use multiple of 16 bytes */
+	buf[0] = adapter->tx_queue.tx_ring.next2fill;
+	buf[1] = adapter->tx_queue.tx_ring.next2comp;
+	buf[2] = adapter->tx_queue.tx_ring.gen;
+	buf[3] = 0;
+
+	buf[4] = adapter->tx_queue.comp_ring.next2proc;
+	buf[5] = adapter->tx_queue.comp_ring.gen;
+	buf[6] = adapter->tx_queue.stopped;
+	buf[7] = 0;
+
+	buf[8] = adapter->rx_queue.rx_ring[0].next2fill;
+	buf[9] = adapter->rx_queue.rx_ring[0].next2comp;
+	buf[10] = adapter->rx_queue.rx_ring[0].gen;
+	buf[11] = 0;
+
+	buf[12] = adapter->rx_queue.rx_ring[1].next2fill;
+	buf[13] = adapter->rx_queue.rx_ring[1].next2comp;
+	buf[14] = adapter->rx_queue.rx_ring[1].gen;
+	buf[15] = 0;
+
+	buf[16] = adapter->rx_queue.comp_ring.next2proc;
+	buf[17] = adapter->rx_queue.comp_ring.gen;
+	buf[18] = 0;
+	buf[19] = 0;
+}
+
+
+static void
+vmxnet3_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+	wol->supported = WAKE_UCAST | WAKE_ARP | WAKE_MAGIC;
+	wol->wolopts = adapter->wol;
+}
+
+
+static int
+vmxnet3_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+	if (wol->wolopts & (WAKE_PHY | WAKE_MCAST | WAKE_BCAST |
+			    WAKE_MAGICSECURE)) {
+		return -EOPNOTSUPP;
+	}
+
+	adapter->wol = wol->wolopts;
+
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+	return 0;
+}
+
+
+static int
+vmxnet3_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+	ecmd->supported = SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full |
+			  SUPPORTED_TP;
+	ecmd->advertising = ADVERTISED_TP;
+	ecmd->port = PORT_TP;
+	ecmd->transceiver = XCVR_INTERNAL;
+
+	if (adapter->link_speed) {
+		ecmd->speed = adapter->link_speed;
+		ecmd->duplex = DUPLEX_FULL;
+	} else {
+		ecmd->speed = -1;
+		ecmd->duplex = -1;
+	}
+	return 0;
+}
+
+
+static void
+vmxnet3_get_ringparam(struct net_device *netdev,
+		      struct ethtool_ringparam *param)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+	param->rx_max_pending = VMXNET3_RX_RING_MAX_SIZE;
+	param->tx_max_pending = VMXNET3_TX_RING_MAX_SIZE;
+	param->rx_mini_max_pending = 0;
+	param->rx_jumbo_max_pending = 0;
+
+	param->rx_pending = adapter->rx_queue.rx_ring[0].size;
+	param->tx_pending = adapter->tx_queue.tx_ring.size;
+	param->rx_mini_pending = 0;
+	param->rx_jumbo_pending = 0;
+}
+
+
+static int
+vmxnet3_set_ringparam(struct net_device *netdev,
+		      struct ethtool_ringparam *param)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	u32 new_tx_ring_size, new_rx_ring_size;
+	u32 sz;
+	int err = 0;
+
+	if (param->tx_pending == 0 || param->tx_pending >
+						VMXNET3_TX_RING_MAX_SIZE)
+		return -EINVAL;
+
+	if (param->rx_pending == 0 || param->rx_pending >
+						VMXNET3_RX_RING_MAX_SIZE)
+		return -EINVAL;
+
+
+	/* round it up to a multiple of VMXNET3_RING_SIZE_ALIGN */
+	new_tx_ring_size = (param->tx_pending + VMXNET3_RING_SIZE_MASK) &
+							~VMXNET3_RING_SIZE_MASK;
+	new_tx_ring_size = min_t(u32, new_tx_ring_size,
+				 VMXNET3_TX_RING_MAX_SIZE);
+	if (new_tx_ring_size > VMXNET3_TX_RING_MAX_SIZE || (new_tx_ring_size %
+						VMXNET3_RING_SIZE_ALIGN) != 0)
+		return -EINVAL;
+
+	/* ring0 has to be a multiple of
+	 * rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN
+	 */
+	sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN;
+	new_rx_ring_size = (param->rx_pending + sz - 1) / sz * sz;
+	new_rx_ring_size = min_t(u32, new_rx_ring_size,
+				 VMXNET3_RX_RING_MAX_SIZE / sz * sz);
+	if (new_rx_ring_size > VMXNET3_RX_RING_MAX_SIZE || (new_rx_ring_size %
+							   sz) != 0)
+		return -EINVAL;
+
+	if (new_tx_ring_size == adapter->tx_queue.tx_ring.size &&
+			new_rx_ring_size == adapter->rx_queue.rx_ring[0].size) {
+		return 0;
+	}
+
+	/*
+	 * Reset_work may be in the middle of resetting the device, wait for its
+	 * completion.
+	 */
+	while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
+		msleep(1);
+
+	if (netif_running(netdev)) {
+		vmxnet3_quiesce_dev(adapter);
+		vmxnet3_reset_dev(adapter);
+
+		/* recreate the rx queue and the tx queue based on the
+		 * new sizes */
+		vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+		vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+
+		err = vmxnet3_create_queues(adapter, new_tx_ring_size,
+			new_rx_ring_size, VMXNET3_DEF_RX_RING_SIZE);
+		if (err) {
+			/* failed, most likely because of OOM, try default
+			 * size */
+			printk(KERN_ERR "%s: failed to apply new sizes, try the"
+				" default ones\n", netdev->name);
+			err = vmxnet3_create_queues(adapter,
+						    VMXNET3_DEF_TX_RING_SIZE,
+						    VMXNET3_DEF_RX_RING_SIZE,
+						    VMXNET3_DEF_RX_RING_SIZE);
+			if (err) {
+				printk(KERN_ERR "%s: failed to create queues "
+					"with default sizes. Closing it\n",
+					netdev->name);
+				goto out;
+			}
+		}
+
+		err = vmxnet3_activate_dev(adapter);
+		if (err)
+			printk(KERN_ERR "%s: failed to re-activate, error %d."
+				" Closing it\n", netdev->name, err);
+	}
+
+out:
+	clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
+	if (err)
+		vmxnet3_force_close(adapter);
+
+	return err;
+}
+
+
+static struct ethtool_ops vmxnet3_ethtool_ops = {
+	.get_settings      = vmxnet3_get_settings,
+	.get_drvinfo       = vmxnet3_get_drvinfo,
+	.get_regs_len      = vmxnet3_get_regs_len,
+	.get_regs          = vmxnet3_get_regs,
+	.get_wol           = vmxnet3_get_wol,
+	.set_wol           = vmxnet3_set_wol,
+	.get_link          = ethtool_op_get_link,
+	.get_rx_csum       = vmxnet3_get_rx_csum,
+	.set_rx_csum       = vmxnet3_set_rx_csum,
+	.get_tx_csum       = ethtool_op_get_tx_csum,
+	.set_tx_csum       = ethtool_op_set_tx_hw_csum,
+	.get_sg            = ethtool_op_get_sg,
+	.set_sg            = ethtool_op_set_sg,
+	.get_tso           = ethtool_op_get_tso,
+	.set_tso           = ethtool_op_set_tso,
+	.get_strings       = vmxnet3_get_strings,
+	.get_flags	   = vmxnet3_get_flags,
+	.set_flags	   = vmxnet3_set_flags,
+	.get_sset_count	   = vmxnet3_get_sset_count,
+	.get_ethtool_stats = vmxnet3_get_ethtool_stats,
+	.get_ringparam     = vmxnet3_get_ringparam,
+	.set_ringparam     = vmxnet3_set_ringparam,
+};
+
+void vmxnet3_set_ethtool_ops(struct net_device *netdev)
+{
+	SET_ETHTOOL_OPS(netdev, &vmxnet3_ethtool_ops);
+}
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
new file mode 100644
index 000000000000..3c0d70d58111
--- /dev/null
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -0,0 +1,389 @@
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+#ifndef _VMXNET3_INT_H
+#define _VMXNET3_INT_H
+
+#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/ethtool.h>
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/ioport.h>
+#include <linux/highmem.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/uaccess.h>
+#include <asm/dma.h>
+#include <asm/page.h>
+
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/in.h>
+#include <linux/etherdevice.h>
+#include <asm/checksum.h>
+#include <linux/if_vlan.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+
+#include "vmxnet3_defs.h"
+
+#ifdef DEBUG
+# define VMXNET3_DRIVER_VERSION_REPORT VMXNET3_DRIVER_VERSION_STRING"-NAPI(debug)"
+#else
+# define VMXNET3_DRIVER_VERSION_REPORT VMXNET3_DRIVER_VERSION_STRING"-NAPI"
+#endif
+
+
+/*
+ * Version numbers
+ */
+#define VMXNET3_DRIVER_VERSION_STRING   "1.0.5.0-k"
+
+/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
+#define VMXNET3_DRIVER_VERSION_NUM      0x01000500
+
+
+/*
+ * Capabilities
+ */
+
+enum {
+	VMNET_CAP_SG	        = 0x0001, /* Can do scatter-gather transmits. */
+	VMNET_CAP_IP4_CSUM      = 0x0002, /* Can checksum only TCP/UDP over
+					   * IPv4 */
+	VMNET_CAP_HW_CSUM       = 0x0004, /* Can checksum all packets. */
+	VMNET_CAP_HIGH_DMA      = 0x0008, /* Can DMA to high memory. */
+	VMNET_CAP_TOE	        = 0x0010, /* Supports TCP/IP offload. */
+	VMNET_CAP_TSO	        = 0x0020, /* Supports TCP Segmentation
+					   * offload */
+	VMNET_CAP_SW_TSO        = 0x0040, /* Supports SW TCP Segmentation */
+	VMNET_CAP_VMXNET_APROM  = 0x0080, /* Vmxnet APROM support */
+	VMNET_CAP_HW_TX_VLAN    = 0x0100, /* Can we do VLAN tagging in HW */
+	VMNET_CAP_HW_RX_VLAN    = 0x0200, /* Can we do VLAN untagging in HW */
+	VMNET_CAP_SW_VLAN       = 0x0400, /* VLAN tagging/untagging in SW */
+	VMNET_CAP_WAKE_PCKT_RCV = 0x0800, /* Can wake on network packet recv? */
+	VMNET_CAP_ENABLE_INT_INLINE = 0x1000,  /* Enable Interrupt Inline */
+	VMNET_CAP_ENABLE_HEADER_COPY = 0x2000,  /* copy header for vmkernel */
+	VMNET_CAP_TX_CHAIN      = 0x4000, /* Guest can use multiple tx entries
+					  * for a pkt */
+	VMNET_CAP_RX_CHAIN      = 0x8000, /* pkt can span multiple rx entries */
+	VMNET_CAP_LPD           = 0x10000, /* large pkt delivery */
+	VMNET_CAP_BPF           = 0x20000, /* BPF Support in VMXNET Virtual HW*/
+	VMNET_CAP_SG_SPAN_PAGES = 0x40000, /* Scatter-gather can span multiple*/
+					   /* pages transmits */
+	VMNET_CAP_IP6_CSUM      = 0x80000, /* Can do IPv6 csum offload. */
+	VMNET_CAP_TSO6         = 0x100000, /* TSO seg. offload for IPv6 pkts. */
+	VMNET_CAP_TSO256k      = 0x200000, /* Can do TSO seg offload for */
+					   /* pkts up to 256kB. */
+	VMNET_CAP_UPT          = 0x400000  /* Support UPT */
+};
+
+/*
+ * PCI vendor and device IDs.
+ */
+#define PCI_VENDOR_ID_VMWARE            0x15AD
+#define PCI_DEVICE_ID_VMWARE_VMXNET3    0x07B0
+#define MAX_ETHERNET_CARDS		10
+#define MAX_PCI_PASSTHRU_DEVICE		6
+
+struct vmxnet3_cmd_ring {
+	union Vmxnet3_GenericDesc *base;
+	u32		size;
+	u32		next2fill;
+	u32		next2comp;
+	u8		gen;
+	dma_addr_t	basePA;
+};
+
+static inline void
+vmxnet3_cmd_ring_adv_next2fill(struct vmxnet3_cmd_ring *ring)
+{
+	ring->next2fill++;
+	if (unlikely(ring->next2fill == ring->size)) {
+		ring->next2fill = 0;
+		VMXNET3_FLIP_RING_GEN(ring->gen);
+	}
+}
+
+static inline void
+vmxnet3_cmd_ring_adv_next2comp(struct vmxnet3_cmd_ring *ring)
+{
+	VMXNET3_INC_RING_IDX_ONLY(ring->next2comp, ring->size);
+}
+
+static inline int
+vmxnet3_cmd_ring_desc_avail(struct vmxnet3_cmd_ring *ring)
+{
+	return (ring->next2comp > ring->next2fill ? 0 : ring->size) +
+		ring->next2comp - ring->next2fill - 1;
+}
+
+struct vmxnet3_comp_ring {
+	union Vmxnet3_GenericDesc *base;
+	u32               size;
+	u32               next2proc;
+	u8                gen;
+	u8                intr_idx;
+	dma_addr_t           basePA;
+};
+
+static inline void
+vmxnet3_comp_ring_adv_next2proc(struct vmxnet3_comp_ring *ring)
+{
+	ring->next2proc++;
+	if (unlikely(ring->next2proc == ring->size)) {
+		ring->next2proc = 0;
+		VMXNET3_FLIP_RING_GEN(ring->gen);
+	}
+}
+
+struct vmxnet3_tx_data_ring {
+	struct Vmxnet3_TxDataDesc *base;
+	u32              size;
+	dma_addr_t          basePA;
+};
+
+enum vmxnet3_buf_map_type {
+	VMXNET3_MAP_INVALID = 0,
+	VMXNET3_MAP_NONE,
+	VMXNET3_MAP_SINGLE,
+	VMXNET3_MAP_PAGE,
+};
+
+struct vmxnet3_tx_buf_info {
+	u32      map_type;
+	u16      len;
+	u16      sop_idx;
+	dma_addr_t  dma_addr;
+	struct sk_buff *skb;
+};
+
+struct vmxnet3_tq_driver_stats {
+	u64 drop_total;     /* # of pkts dropped by the driver, the
+				* counters below track droppings due to
+				* different reasons
+				*/
+	u64 drop_too_many_frags;
+	u64 drop_oversized_hdr;
+	u64 drop_hdr_inspect_err;
+	u64 drop_tso;
+
+	u64 tx_ring_full;
+	u64 linearized;         /* # of pkts linearized */
+	u64 copy_skb_header;    /* # of times we have to copy skb header */
+	u64 oversized_hdr;
+};
+
+struct vmxnet3_tx_ctx {
+	bool   ipv4;
+	u16 mss;
+	u32 eth_ip_hdr_size; /* only valid for pkts requesting tso or csum
+				 * offloading
+				 */
+	u32 l4_hdr_size;     /* only valid if mss != 0 */
+	u32 copy_size;       /* # of bytes copied into the data ring */
+	union Vmxnet3_GenericDesc *sop_txd;
+	union Vmxnet3_GenericDesc *eop_txd;
+};
+
+struct vmxnet3_tx_queue {
+	spinlock_t                      tx_lock;
+	struct vmxnet3_cmd_ring         tx_ring;
+	struct vmxnet3_tx_buf_info     *buf_info;
+	struct vmxnet3_tx_data_ring     data_ring;
+	struct vmxnet3_comp_ring        comp_ring;
+	struct Vmxnet3_TxQueueCtrl            *shared;
+	struct vmxnet3_tq_driver_stats  stats;
+	bool                            stopped;
+	int                             num_stop;  /* # of times the queue is
+						    * stopped */
+} __attribute__((__aligned__(SMP_CACHE_BYTES)));
+
+enum vmxnet3_rx_buf_type {
+	VMXNET3_RX_BUF_NONE = 0,
+	VMXNET3_RX_BUF_SKB = 1,
+	VMXNET3_RX_BUF_PAGE = 2
+};
+
+struct vmxnet3_rx_buf_info {
+	enum vmxnet3_rx_buf_type buf_type;
+	u16     len;
+	union {
+		struct sk_buff *skb;
+		struct page    *page;
+	};
+	dma_addr_t dma_addr;
+};
+
+struct vmxnet3_rx_ctx {
+	struct sk_buff *skb;
+	u32 sop_idx;
+};
+
+struct vmxnet3_rq_driver_stats {
+	u64 drop_total;
+	u64 drop_err;
+	u64 drop_fcs;
+	u64 rx_buf_alloc_failure;
+};
+
+struct vmxnet3_rx_queue {
+	struct vmxnet3_cmd_ring   rx_ring[2];
+	struct vmxnet3_comp_ring  comp_ring;
+	struct vmxnet3_rx_ctx     rx_ctx;
+	u32 qid;            /* rqID in RCD for buffer from 1st ring */
+	u32 qid2;           /* rqID in RCD for buffer from 2nd ring */
+	u32 uncommitted[2]; /* # of buffers allocated since last RXPROD
+				* update */
+	struct vmxnet3_rx_buf_info     *buf_info[2];
+	struct Vmxnet3_RxQueueCtrl            *shared;
+	struct vmxnet3_rq_driver_stats  stats;
+} __attribute__((__aligned__(SMP_CACHE_BYTES)));
+
+#define VMXNET3_LINUX_MAX_MSIX_VECT     1
+
+struct vmxnet3_intr {
+	enum vmxnet3_intr_mask_mode  mask_mode;
+	enum vmxnet3_intr_type       type;	/* MSI-X, MSI, or INTx? */
+	u8  num_intrs;			/* # of intr vectors */
+	u8  event_intr_idx;		/* idx of the intr vector for event */
+	u8  mod_levels[VMXNET3_LINUX_MAX_MSIX_VECT]; /* moderation level */
+#ifdef CONFIG_PCI_MSI
+	struct msix_entry msix_entries[VMXNET3_LINUX_MAX_MSIX_VECT];
+#endif
+};
+
+#define VMXNET3_STATE_BIT_RESETTING   0
+#define VMXNET3_STATE_BIT_QUIESCED    1
+struct vmxnet3_adapter {
+	struct vmxnet3_tx_queue         tx_queue;
+	struct vmxnet3_rx_queue         rx_queue;
+	struct napi_struct              napi;
+	struct vlan_group              *vlan_grp;
+
+	struct vmxnet3_intr             intr;
+
+	struct Vmxnet3_DriverShared    *shared;
+	struct Vmxnet3_PMConf          *pm_conf;
+	struct Vmxnet3_TxQueueDesc     *tqd_start;     /* first tx queue desc */
+	struct Vmxnet3_RxQueueDesc     *rqd_start;     /* first rx queue desc */
+	struct net_device              *netdev;
+	struct pci_dev                 *pdev;
+
+	u8				*hw_addr0; /* for BAR 0 */
+	u8				*hw_addr1; /* for BAR 1 */
+
+	/* feature control */
+	bool				rxcsum;
+	bool				lro;
+	bool				jumbo_frame;
+
+	/* rx buffer related */
+	unsigned			skb_buf_size;
+	int		rx_buf_per_pkt;  /* only apply to the 1st ring */
+	dma_addr_t			shared_pa;
+	dma_addr_t queue_desc_pa;
+
+	/* Wake-on-LAN */
+	u32     wol;
+
+	/* Link speed */
+	u32     link_speed; /* in mbps */
+
+	u64     tx_timeout_count;
+	struct work_struct work;
+
+	unsigned long  state;    /* VMXNET3_STATE_BIT_xxx */
+
+	int dev_number;
+};
+
+#define VMXNET3_WRITE_BAR0_REG(adapter, reg, val)  \
+	writel((val), (adapter)->hw_addr0 + (reg))
+#define VMXNET3_READ_BAR0_REG(adapter, reg)        \
+	readl((adapter)->hw_addr0 + (reg))
+
+#define VMXNET3_WRITE_BAR1_REG(adapter, reg, val)  \
+	writel((val), (adapter)->hw_addr1 + (reg))
+#define VMXNET3_READ_BAR1_REG(adapter, reg)        \
+	readl((adapter)->hw_addr1 + (reg))
+
+#define VMXNET3_WAKE_QUEUE_THRESHOLD(tq)  (5)
+#define VMXNET3_RX_ALLOC_THRESHOLD(rq, ring_idx, adapter) \
+	((rq)->rx_ring[ring_idx].size >> 3)
+
+#define VMXNET3_GET_ADDR_LO(dma)   ((u32)(dma))
+#define VMXNET3_GET_ADDR_HI(dma)   ((u32)(((u64)(dma)) >> 32))
+
+/* must be a multiple of VMXNET3_RING_SIZE_ALIGN */
+#define VMXNET3_DEF_TX_RING_SIZE    512
+#define VMXNET3_DEF_RX_RING_SIZE    256
+
+#define VMXNET3_MAX_ETH_HDR_SIZE    22
+#define VMXNET3_MAX_SKB_BUF_SIZE    (3*1024)
+
+int
+vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter);
+
+int
+vmxnet3_activate_dev(struct vmxnet3_adapter *adapter);
+
+void
+vmxnet3_force_close(struct vmxnet3_adapter *adapter);
+
+void
+vmxnet3_reset_dev(struct vmxnet3_adapter *adapter);
+
+void
+vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq,
+		   struct vmxnet3_adapter *adapter);
+
+void
+vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq,
+		   struct vmxnet3_adapter *adapter);
+
+int
+vmxnet3_create_queues(struct vmxnet3_adapter *adapter,
+		      u32 tx_ring_size, u32 rx_ring_size, u32 rx_ring2_size);
+
+extern void vmxnet3_set_ethtool_ops(struct net_device *netdev);
+extern struct net_device_stats *vmxnet3_get_stats(struct net_device *netdev);
+
+extern char vmxnet3_driver_name[];
+#endif
diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c
index 9693b0fd323d..0bd898c94759 100644
--- a/drivers/net/wan/c101.c
+++ b/drivers/net/wan/c101.c
@@ -16,6 +16,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/capability.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/string.h>
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 66360a2a14c2..e2c33c06190b 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -76,6 +76,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/poll.h>
 #include <linux/fs.h>
diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c
index 2573c18b6aa5..cd8cb95c5bd7 100644
--- a/drivers/net/wan/cycx_x25.c
+++ b/drivers/net/wan/cycx_x25.c
@@ -84,6 +84,7 @@
 #include <linux/kernel.h>	/* printk(), and other useful stuff */
 #include <linux/module.h>
 #include <linux/string.h>	/* inline memset(), etc. */
+#include <linux/sched.h>
 #include <linux/slab.h>		/* kmalloc(), kfree() */
 #include <linux/stddef.h>	/* offsetof(), etc. */
 #include <linux/wanrouter.h>	/* WAN router definitions */
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 81c8aec9df92..07d00b4cf48a 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -81,6 +81,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/list.h>
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 3e90eb816181..beda387f2fc7 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/version.h>
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/if.h>
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index cf5fd17ad707..f1bff98acd1f 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -58,8 +58,7 @@ struct cisco_state {
 	spinlock_t lock;
 	unsigned long last_poll;
 	int up;
-	int request_sent;
-	u32 txseq; /* TX sequence number */
+	u32 txseq; /* TX sequence number, 0 = none */
 	u32 rxseq; /* RX sequence number */
 };
 
@@ -163,6 +162,7 @@ static int cisco_rx(struct sk_buff *skb)
 	struct cisco_packet *cisco_data;
 	struct in_device *in_dev;
 	__be32 addr, mask;
+	u32 ack;
 
 	if (skb->len < sizeof(struct hdlc_header))
 		goto rx_error;
@@ -223,8 +223,10 @@ static int cisco_rx(struct sk_buff *skb)
 		case CISCO_KEEPALIVE_REQ:
 			spin_lock(&st->lock);
 			st->rxseq = ntohl(cisco_data->par1);
-			if (st->request_sent &&
-			    ntohl(cisco_data->par2) == st->txseq) {
+			ack = ntohl(cisco_data->par2);
+			if (ack && (ack == st->txseq ||
+				    /* our current REQ may be in transit */
+				    ack == st->txseq - 1)) {
 				st->last_poll = jiffies;
 				if (!st->up) {
 					u32 sec, min, hrs, days;
@@ -275,7 +277,6 @@ static void cisco_timer(unsigned long arg)
 
 	cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq),
 			     htonl(st->rxseq));
-	st->request_sent = 1;
 	spin_unlock(&st->lock);
 
 	st->timer.expires = jiffies + st->settings.interval * HZ;
@@ -293,9 +294,7 @@ static void cisco_start(struct net_device *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&st->lock, flags);
-	st->up = 0;
-	st->request_sent = 0;
-	st->txseq = st->rxseq = 0;
+	st->up = st->txseq = st->rxseq = 0;
 	spin_unlock_irqrestore(&st->lock, flags);
 
 	init_timer(&st->timer);
@@ -317,8 +316,7 @@ static void cisco_stop(struct net_device *dev)
 
 	spin_lock_irqsave(&st->lock, flags);
 	netif_dormant_on(dev);
-	st->up = 0;
-	st->request_sent = 0;
+	st->up = st->txseq = 0;
 	spin_unlock_irqrestore(&st->lock, flags);
 }
 
diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
index 83da596e2052..58c66819f39b 100644
--- a/drivers/net/wan/n2.c
+++ b/drivers/net/wan/n2.c
@@ -18,6 +18,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/capability.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/fcntl.h>
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index a52f29c72c33..f1340faaf022 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -16,6 +16,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/capability.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/fcntl.h>
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 49ea9c92b7e6..d7a764a2fc1a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -31,13 +31,12 @@ config STRIP
 	---help---
 	  Say Y if you have a Metricom radio and intend to use Starmode Radio
 	  IP. STRIP is a radio protocol developed for the MosquitoNet project
-	  (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
-	  traffic using Metricom radios.  Metricom radios are small, battery
-	  powered, 100kbit/sec packet radio transceivers, about the size and
-	  weight of a cellular telephone. (You may also have heard them called
-	  "Metricom modems" but we avoid the term "modem" because it misleads
-	  many people into thinking that you can plug a Metricom modem into a
-	  phone line and use it as a modem.)
+	  to send Internet traffic using Metricom radios.  Metricom radios are
+	  small, battery powered, 100kbit/sec packet radio transceivers, about
+	  the size and weight of a cellular telephone. (You may also have heard
+	  them called "Metricom modems" but we avoid the term "modem" because
+	  it misleads many people into thinking that you can plug a Metricom
+	  modem into a phone line and use it as a modem.)
 
 	  You can use STRIP on any Linux machine with a serial port, although
 	  it is obviously most useful for people with laptop computers. If you
diff --git a/drivers/net/wireless/adm8211.h b/drivers/net/wireless/adm8211.h
index 4f6ab1322189..b07e4d3a6b4d 100644
--- a/drivers/net/wireless/adm8211.h
+++ b/drivers/net/wireless/adm8211.h
@@ -266,7 +266,7 @@ do {								\
 #define ADM8211_SYNCTL_CS1	(1 << 28)
 #define ADM8211_SYNCTL_CAL	(1 << 27)
 #define ADM8211_SYNCTL_SELCAL	(1 << 26)
-#define ADM8211_SYNCTL_RFtype	((1 << 24) || (1 << 23) || (1 << 22))
+#define ADM8211_SYNCTL_RFtype	((1 << 24) | (1 << 23) | (1 << 22))
 #define ADM8211_SYNCTL_RFMD	(1 << 22)
 #define ADM8211_SYNCTL_GENERAL	(0x7 << 22)
 /* SYNCTL 21:0 Data (Si4126: 18-bit data, 4-bit address) */
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index b3e5cf3735b0..dbd488da18b1 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -1141,7 +1141,8 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar,
 	u8 vpds[2][AR5416_PD_GAIN_ICEPTS];
 	u8 pwrs[2][AR5416_PD_GAIN_ICEPTS];
 	int chain, idx, i;
-	u8 f;
+	u32 phy_data = 0;
+	u8 f, tmp;
 
 	switch (channel->band) {
 	case IEEE80211_BAND_2GHZ:
@@ -1208,9 +1209,6 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar,
 		}
 
 		for (i = 0; i < 76; i++) {
-			u32 phy_data;
-			u8 tmp;
-
 			if (i < 25) {
 				tmp = ar9170_interpolate_val(i, &pwrs[0][0],
 							     &vpds[0][0]);
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index fa1549a03c71..660716214d49 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -607,82 +607,7 @@ struct b43_qos_params {
 	struct ieee80211_tx_queue_params p;
 };
 
-struct b43_wldev;
-
-/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
-struct b43_wl {
-	/* Pointer to the active wireless device on this chip */
-	struct b43_wldev *current_dev;
-	/* Pointer to the ieee80211 hardware data structure */
-	struct ieee80211_hw *hw;
-
-	/* Global driver mutex. Every operation must run with this mutex locked. */
-	struct mutex mutex;
-	/* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
-	 * handler, only. This basically is just the IRQ mask register. */
-	spinlock_t hardirq_lock;
-
-	/* The number of queues that were registered with the mac80211 subsystem
-	 * initially. This is a backup copy of hw->queues in case hw->queues has
-	 * to be dynamically lowered at runtime (Firmware does not support QoS).
-	 * hw->queues has to be restored to the original value before unregistering
-	 * from the mac80211 subsystem. */
-	u16 mac80211_initially_registered_queues;
-
-	/* We can only have one operating interface (802.11 core)
-	 * at a time. General information about this interface follows.
-	 */
-
-	struct ieee80211_vif *vif;
-	/* The MAC address of the operating interface. */
-	u8 mac_addr[ETH_ALEN];
-	/* Current BSSID */
-	u8 bssid[ETH_ALEN];
-	/* Interface type. (NL80211_IFTYPE_XXX) */
-	int if_type;
-	/* Is the card operating in AP, STA or IBSS mode? */
-	bool operating;
-	/* filter flags */
-	unsigned int filter_flags;
-	/* Stats about the wireless interface */
-	struct ieee80211_low_level_stats ieee_stats;
-
-#ifdef CONFIG_B43_HWRNG
-	struct hwrng rng;
-	bool rng_initialized;
-	char rng_name[30 + 1];
-#endif /* CONFIG_B43_HWRNG */
-
-	/* List of all wireless devices on this chip */
-	struct list_head devlist;
-	u8 nr_devs;
-
-	bool radiotap_enabled;
-	bool radio_enabled;
-
-	/* The beacon we are currently using (AP or IBSS mode). */
-	struct sk_buff *current_beacon;
-	bool beacon0_uploaded;
-	bool beacon1_uploaded;
-	bool beacon_templates_virgin; /* Never wrote the templates? */
-	struct work_struct beacon_update_trigger;
-
-	/* The current QOS parameters for the 4 queues. */
-	struct b43_qos_params qos_params[4];
-
-	/* Work for adjustment of the transmission power.
-	 * This is scheduled when we determine that the actual TX output
-	 * power doesn't match what we want. */
-	struct work_struct txpower_adjust_work;
-
-	/* Packet transmit work */
-	struct work_struct tx_work;
-	/* Queue of packets to be transmitted. */
-	struct sk_buff_head tx_queue;
-
-	/* The device LEDs. */
-	struct b43_leds leds;
-};
+struct b43_wl;
 
 /* The type of the firmware file. */
 enum b43_firmware_file_type {
@@ -824,6 +749,97 @@ struct b43_wldev {
 #endif
 };
 
+/*
+ * Include goes here to avoid a dependency problem.
+ * A better fix would be to integrate xmit.h into b43.h.
+ */
+#include "xmit.h"
+
+/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
+struct b43_wl {
+	/* Pointer to the active wireless device on this chip */
+	struct b43_wldev *current_dev;
+	/* Pointer to the ieee80211 hardware data structure */
+	struct ieee80211_hw *hw;
+
+	/* Global driver mutex. Every operation must run with this mutex locked. */
+	struct mutex mutex;
+	/* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
+	 * handler, only. This basically is just the IRQ mask register. */
+	spinlock_t hardirq_lock;
+
+	/* The number of queues that were registered with the mac80211 subsystem
+	 * initially. This is a backup copy of hw->queues in case hw->queues has
+	 * to be dynamically lowered at runtime (Firmware does not support QoS).
+	 * hw->queues has to be restored to the original value before unregistering
+	 * from the mac80211 subsystem. */
+	u16 mac80211_initially_registered_queues;
+
+	/* We can only have one operating interface (802.11 core)
+	 * at a time. General information about this interface follows.
+	 */
+
+	struct ieee80211_vif *vif;
+	/* The MAC address of the operating interface. */
+	u8 mac_addr[ETH_ALEN];
+	/* Current BSSID */
+	u8 bssid[ETH_ALEN];
+	/* Interface type. (NL80211_IFTYPE_XXX) */
+	int if_type;
+	/* Is the card operating in AP, STA or IBSS mode? */
+	bool operating;
+	/* filter flags */
+	unsigned int filter_flags;
+	/* Stats about the wireless interface */
+	struct ieee80211_low_level_stats ieee_stats;
+
+#ifdef CONFIG_B43_HWRNG
+	struct hwrng rng;
+	bool rng_initialized;
+	char rng_name[30 + 1];
+#endif /* CONFIG_B43_HWRNG */
+
+	/* List of all wireless devices on this chip */
+	struct list_head devlist;
+	u8 nr_devs;
+
+	bool radiotap_enabled;
+	bool radio_enabled;
+
+	/* The beacon we are currently using (AP or IBSS mode). */
+	struct sk_buff *current_beacon;
+	bool beacon0_uploaded;
+	bool beacon1_uploaded;
+	bool beacon_templates_virgin; /* Never wrote the templates? */
+	struct work_struct beacon_update_trigger;
+
+	/* The current QOS parameters for the 4 queues. */
+	struct b43_qos_params qos_params[4];
+
+	/* Work for adjustment of the transmission power.
+	 * This is scheduled when we determine that the actual TX output
+	 * power doesn't match what we want. */
+	struct work_struct txpower_adjust_work;
+
+	/* Packet transmit work */
+	struct work_struct tx_work;
+	/* Queue of packets to be transmitted. */
+	struct sk_buff_head tx_queue;
+
+	/* The device LEDs. */
+	struct b43_leds leds;
+
+#ifdef CONFIG_B43_PIO
+	/*
+	 * RX/TX header/tail buffers used by the frame transmit functions.
+	 */
+	struct b43_rxhdr_fw4 rxhdr;
+	struct b43_txhdr txhdr;
+	u8 rx_tail[4];
+	u8 tx_tail[4];
+#endif /* CONFIG_B43_PIO */
+};
+
 static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
 {
 	return hw->priv;
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index fbe3d4f62ce2..1e8dba488004 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -348,9 +348,9 @@ void b43_leds_register(struct b43_wldev *dev)
 	}
 }
 
-void b43_leds_unregister(struct b43_wldev *dev)
+void b43_leds_unregister(struct b43_wl *wl)
 {
-	struct b43_leds *leds = &dev->wl->leds;
+	struct b43_leds *leds = &wl->leds;
 
 	b43_unregister_led(&leds->led_tx);
 	b43_unregister_led(&leds->led_rx);
diff --git a/drivers/net/wireless/b43/leds.h b/drivers/net/wireless/b43/leds.h
index 9592e4c5a5f5..4c56187810fc 100644
--- a/drivers/net/wireless/b43/leds.h
+++ b/drivers/net/wireless/b43/leds.h
@@ -60,7 +60,7 @@ enum b43_led_behaviour {
 };
 
 void b43_leds_register(struct b43_wldev *dev);
-void b43_leds_unregister(struct b43_wldev *dev);
+void b43_leds_unregister(struct b43_wl *wl);
 void b43_leds_init(struct b43_wldev *dev);
 void b43_leds_exit(struct b43_wldev *dev);
 void b43_leds_stop(struct b43_wldev *dev);
@@ -76,7 +76,7 @@ struct b43_leds {
 static inline void b43_leds_register(struct b43_wldev *dev)
 {
 }
-static inline void b43_leds_unregister(struct b43_wldev *dev)
+static inline void b43_leds_unregister(struct b43_wl *wl)
 {
 }
 static inline void b43_leds_init(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 9b907a36bb8c..df6b26a0c05e 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3874,6 +3874,7 @@ static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev)
 {
 	struct b43_wl *wl = dev->wl;
 	struct b43_wldev *orig_dev;
+	u32 mask;
 
 redo:
 	if (!dev || b43_status(dev) < B43_STAT_STARTED)
@@ -3920,7 +3921,8 @@ redo:
 			goto redo;
 		return dev;
 	}
-	B43_WARN_ON(b43_read32(dev, B43_MMIO_GEN_IRQ_MASK));
+	mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
+	B43_WARN_ON(mask != 0xFFFFFFFF && mask);
 
 	/* Drain the TX queue */
 	while (skb_queue_len(&wl->tx_queue))
@@ -4499,6 +4501,7 @@ static void b43_op_stop(struct ieee80211_hw *hw)
 
 	cancel_work_sync(&(wl->beacon_update_trigger));
 
+	wiphy_rfkill_stop_polling(hw->wiphy);
 	mutex_lock(&wl->mutex);
 	if (b43_status(dev) >= B43_STAT_STARTED) {
 		dev = b43_wireless_core_stop(dev);
@@ -4997,7 +5000,7 @@ static void b43_remove(struct ssb_device *dev)
 
 	if (list_empty(&wl->devlist)) {
 		b43_rng_exit(wl);
-		b43_leds_unregister(wldev);
+		b43_leds_unregister(wl);
 		/* Last core on the chip unregistered.
 		 * We can destroy common struct b43_wl.
 		 */
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index e96091b31499..9b9044400218 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -30,6 +30,7 @@
 #include "xmit.h"
 
 #include <linux/delay.h>
+#include <linux/sched.h>
 
 
 static u16 generate_cookie(struct b43_pio_txqueue *q,
@@ -331,6 +332,7 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q,
 				unsigned int data_len)
 {
 	struct b43_wldev *dev = q->dev;
+	struct b43_wl *wl = dev->wl;
 	const u8 *data = _data;
 
 	ctl |= B43_PIO_TXCTL_WRITELO | B43_PIO_TXCTL_WRITEHI;
@@ -343,7 +345,11 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q,
 		/* Write the last byte. */
 		ctl &= ~B43_PIO_TXCTL_WRITEHI;
 		b43_piotx_write16(q, B43_PIO_TXCTL, ctl);
-		b43_piotx_write16(q, B43_PIO_TXDATA, data[data_len - 1]);
+		wl->tx_tail[0] = data[data_len - 1];
+		wl->tx_tail[1] = 0;
+		ssb_block_write(dev->dev, wl->tx_tail, 2,
+				q->mmio_base + B43_PIO_TXDATA,
+				sizeof(u16));
 	}
 
 	return ctl;
@@ -376,6 +382,7 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q,
 				unsigned int data_len)
 {
 	struct b43_wldev *dev = q->dev;
+	struct b43_wl *wl = dev->wl;
 	const u8 *data = _data;
 
 	ctl |= B43_PIO8_TXCTL_0_7 | B43_PIO8_TXCTL_8_15 |
@@ -386,26 +393,33 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q,
 			q->mmio_base + B43_PIO8_TXDATA,
 			sizeof(u32));
 	if (data_len & 3) {
-		u32 value = 0;
-
+		wl->tx_tail[3] = 0;
 		/* Write the last few bytes. */
 		ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 |
 			 B43_PIO8_TXCTL_24_31);
-		data = &(data[data_len - 1]);
 		switch (data_len & 3) {
 		case 3:
-			ctl |= B43_PIO8_TXCTL_16_23;
-			value |= (u32)(*data) << 16;
-			data--;
+			ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15;
+			wl->tx_tail[0] = data[data_len - 3];
+			wl->tx_tail[1] = data[data_len - 2];
+			wl->tx_tail[2] = data[data_len - 1];
+			break;
 		case 2:
 			ctl |= B43_PIO8_TXCTL_8_15;
-			value |= (u32)(*data) << 8;
-			data--;
+			wl->tx_tail[0] = data[data_len - 2];
+			wl->tx_tail[1] = data[data_len - 1];
+			wl->tx_tail[2] = 0;
+			break;
 		case 1:
-			value |= (u32)(*data);
+			wl->tx_tail[0] = data[data_len - 1];
+			wl->tx_tail[1] = 0;
+			wl->tx_tail[2] = 0;
+			break;
 		}
 		b43_piotx_write32(q, B43_PIO8_TXCTL, ctl);
-		b43_piotx_write32(q, B43_PIO8_TXDATA, value);
+		ssb_block_write(dev->dev, wl->tx_tail, 4,
+				q->mmio_base + B43_PIO8_TXDATA,
+				sizeof(u32));
 	}
 
 	return ctl;
@@ -435,8 +449,9 @@ static void pio_tx_frame_4byte_queue(struct b43_pio_txpacket *pack,
 static int pio_tx_frame(struct b43_pio_txqueue *q,
 			struct sk_buff *skb)
 {
+	struct b43_wldev *dev = q->dev;
+	struct b43_wl *wl = dev->wl;
 	struct b43_pio_txpacket *pack;
-	struct b43_txhdr txhdr;
 	u16 cookie;
 	int err;
 	unsigned int hdrlen;
@@ -447,8 +462,8 @@ static int pio_tx_frame(struct b43_pio_txqueue *q,
 			  struct b43_pio_txpacket, list);
 
 	cookie = generate_cookie(q, pack);
-	hdrlen = b43_txhdr_size(q->dev);
-	err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb,
+	hdrlen = b43_txhdr_size(dev);
+	err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb,
 				 info, cookie);
 	if (err)
 		return err;
@@ -456,15 +471,15 @@ static int pio_tx_frame(struct b43_pio_txqueue *q,
 	if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
 		/* Tell the firmware about the cookie of the last
 		 * mcast frame, so it can clear the more-data bit in it. */
-		b43_shm_write16(q->dev, B43_SHM_SHARED,
+		b43_shm_write16(dev, B43_SHM_SHARED,
 				B43_SHM_SH_MCASTCOOKIE, cookie);
 	}
 
 	pack->skb = skb;
 	if (q->rev >= 8)
-		pio_tx_frame_4byte_queue(pack, (const u8 *)&txhdr, hdrlen);
+		pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
 	else
-		pio_tx_frame_2byte_queue(pack, (const u8 *)&txhdr, hdrlen);
+		pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
 
 	/* Remove it from the list of available packet slots.
 	 * It will be put back when we receive the status report. */
@@ -604,14 +619,14 @@ void b43_pio_get_tx_stats(struct b43_wldev *dev,
 static bool pio_rx_frame(struct b43_pio_rxqueue *q)
 {
 	struct b43_wldev *dev = q->dev;
-	struct b43_rxhdr_fw4 rxhdr;
+	struct b43_wl *wl = dev->wl;
 	u16 len;
 	u32 macstat;
 	unsigned int i, padding;
 	struct sk_buff *skb;
 	const char *err_msg = NULL;
 
-	memset(&rxhdr, 0, sizeof(rxhdr));
+	memset(&wl->rxhdr, 0, sizeof(wl->rxhdr));
 
 	/* Check if we have data and wait for it to get ready. */
 	if (q->rev >= 8) {
@@ -649,16 +664,16 @@ data_ready:
 
 	/* Get the preamble (RX header) */
 	if (q->rev >= 8) {
-		ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
+		ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
 			       q->mmio_base + B43_PIO8_RXDATA,
 			       sizeof(u32));
 	} else {
-		ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
+		ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
 			       q->mmio_base + B43_PIO_RXDATA,
 			       sizeof(u16));
 	}
 	/* Sanity checks. */
-	len = le16_to_cpu(rxhdr.frame_len);
+	len = le16_to_cpu(wl->rxhdr.frame_len);
 	if (unlikely(len > 0x700)) {
 		err_msg = "len > 0x700";
 		goto rx_error;
@@ -668,7 +683,7 @@ data_ready:
 		goto rx_error;
 	}
 
-	macstat = le32_to_cpu(rxhdr.mac_status);
+	macstat = le32_to_cpu(wl->rxhdr.mac_status);
 	if (macstat & B43_RX_MAC_FCSERR) {
 		if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) {
 			/* Drop frames with failed FCS. */
@@ -693,21 +708,23 @@ data_ready:
 			       q->mmio_base + B43_PIO8_RXDATA,
 			       sizeof(u32));
 		if (len & 3) {
-			u32 value;
-			char *data;
-
 			/* Read the last few bytes. */
-			value = b43_piorx_read32(q, B43_PIO8_RXDATA);
-			data = &(skb->data[len + padding - 1]);
+			ssb_block_read(dev->dev, wl->rx_tail, 4,
+				       q->mmio_base + B43_PIO8_RXDATA,
+				       sizeof(u32));
 			switch (len & 3) {
 			case 3:
-				*data = (value >> 16);
-				data--;
+				skb->data[len + padding - 3] = wl->rx_tail[0];
+				skb->data[len + padding - 2] = wl->rx_tail[1];
+				skb->data[len + padding - 1] = wl->rx_tail[2];
+				break;
 			case 2:
-				*data = (value >> 8);
-				data--;
+				skb->data[len + padding - 2] = wl->rx_tail[0];
+				skb->data[len + padding - 1] = wl->rx_tail[1];
+				break;
 			case 1:
-				*data = value;
+				skb->data[len + padding - 1] = wl->rx_tail[0];
+				break;
 			}
 		}
 	} else {
@@ -715,15 +732,15 @@ data_ready:
 			       q->mmio_base + B43_PIO_RXDATA,
 			       sizeof(u16));
 		if (len & 1) {
-			u16 value;
-
 			/* Read the last byte. */
-			value = b43_piorx_read16(q, B43_PIO_RXDATA);
-			skb->data[len + padding - 1] = value;
+			ssb_block_read(dev->dev, wl->rx_tail, 2,
+				       q->mmio_base + B43_PIO_RXDATA,
+				       sizeof(u16));
+			skb->data[len + padding - 1] = wl->rx_tail[0];
 		}
 	}
 
-	b43_rx(q->dev, skb, &rxhdr);
+	b43_rx(q->dev, skb, &wl->rxhdr);
 
 	return 1;
 
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index ac9f600995e4..f4e9695ec186 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -27,7 +27,7 @@
 
 */
 
-#include "xmit.h"
+#include "b43.h"
 #include "phy_common.h"
 #include "dma.h"
 #include "pio.h"
@@ -690,7 +690,10 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 	}
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+
+	local_bh_disable();
 	ieee80211_rx(dev->wl->hw, skb);
+	local_bh_enable();
 
 #if B43_DEBUG
 	dev->rx_count++;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 1d9223b3d4c4..4b60148a5e61 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -37,6 +37,7 @@
 #include <linux/firmware.h>
 #include <linux/wireless.h>
 #include <linux/workqueue.h>
+#include <linux/sched.h>
 #include <linux/skbuff.h>
 #include <linux/dma-mapping.h>
 #include <net/dst.h>
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index 11319ec2d64a..aaf227203a98 100644
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -31,6 +31,7 @@
 
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/types.h>
 
 #include "b43legacy.h"
diff --git a/drivers/net/wireless/hostap/hostap_info.c b/drivers/net/wireless/hostap/hostap_info.c
index 6fa14a4e4b53..4dfb40a84c96 100644
--- a/drivers/net/wireless/hostap/hostap_info.c
+++ b/drivers/net/wireless/hostap/hostap_info.c
@@ -1,6 +1,7 @@
 /* Host AP driver Info Frame processing (part of hostap.o module) */
 
 #include <linux/if_arp.h>
+#include <linux/sched.h>
 #include "hostap_wlan.h"
 #include "hostap.h"
 #include "hostap_ap.h"
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index 3f2bda881a4f..9419cebca8a5 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -1,6 +1,7 @@
 /* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */
 
 #include <linux/types.h>
+#include <linux/sched.h>
 #include <linux/ethtool.h>
 #include <linux/if_arp.h>
 #include <net/lib80211.h>
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 8d58e6ed4e7d..827824d45de9 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -30,6 +30,7 @@
 
 ******************************************************************************/
 
+#include <linux/sched.h>
 #include "ipw2200.h"
 
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index a95caa014143..2716b91ba9fa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -99,6 +99,8 @@ static struct iwl_lib_ops iwl1000_lib = {
 	.setup_deferred_work = iwl5000_setup_deferred_work,
 	.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
 	.load_ucode = iwl5000_load_ucode,
+	.dump_nic_event_log = iwl_dump_nic_event_log,
+	.dump_nic_error_log = iwl_dump_nic_error_log,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index a16bd4147eac..cbb0585083a9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -702,7 +702,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 		u8 sta_id = iwl_find_station(priv, hdr->addr1);
 
 		if (sta_id == IWL_INVALID_STATION) {
-			IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n",
+			IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
 				       hdr->addr1);
 			sta_id = iwl_add_station(priv, hdr->addr1, false,
 				CMD_ASYNC, NULL);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index e9a685d8e3a1..f059b49dc691 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -30,6 +30,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/wireless.h>
@@ -610,7 +611,7 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
 	if (rx_status.band == IEEE80211_BAND_5GHZ)
 		rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
 
-	rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags &
+	rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
 					RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
 
 	/* set the preamble flag if appropriate */
@@ -2839,6 +2840,8 @@ static struct iwl_lib_ops iwl3945_lib = {
 	.txq_free_tfd = iwl3945_hw_txq_free_tfd,
 	.txq_init = iwl3945_hw_tx_queue_init,
 	.load_ucode = iwl3945_load_bsm,
+	.dump_nic_event_log = iwl3945_dump_nic_event_log,
+	.dump_nic_error_log = iwl3945_dump_nic_error_log,
 	.apm_ops = {
 		.init = iwl3945_apm_init,
 		.reset = iwl3945_apm_reset,
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index f24036909916..21679bf3a1aa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -209,6 +209,8 @@ extern int __must_check iwl3945_send_cmd(struct iwl_priv *priv,
 					 struct iwl_host_cmd *cmd);
 extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
 					struct ieee80211_hdr *hdr,int left);
+extern void iwl3945_dump_nic_event_log(struct iwl_priv *priv);
+extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv);
 
 /*
  * Currently used by iwl-3945-rs... look at restructuring so that it doesn't
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 3259b8841544..6f703a041847 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -30,6 +30,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/wireless.h>
@@ -2298,6 +2299,8 @@ static struct iwl_lib_ops iwl4965_lib = {
 	.alive_notify = iwl4965_alive_notify,
 	.init_alive_start = iwl4965_init_alive_start,
 	.load_ucode = iwl4965_load_bsm,
+	.dump_nic_event_log = iwl_dump_nic_event_log,
+	.dump_nic_error_log = iwl_dump_nic_error_log,
 	.apm_ops = {
 		.init = iwl4965_apm_init,
 		.reset = iwl4965_apm_reset,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index a6391c7fea53..6e6f516ba404 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -29,6 +29,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/wireless.h>
@@ -317,7 +318,7 @@ static void iwl5000_gain_computation(struct iwl_priv *priv,
 			(s32)average_noise[i])) / 1500;
 		/* bound gain by 2 bits value max, 3rd bit is sign */
 		data->delta_gain_code[i] =
-			min(abs(delta_g), CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
+			min(abs(delta_g), (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
 
 		if (delta_g < 0)
 			/* set negative sign */
@@ -1535,6 +1536,8 @@ struct iwl_lib_ops iwl5000_lib = {
 	.rx_handler_setup = iwl5000_rx_handler_setup,
 	.setup_deferred_work = iwl5000_setup_deferred_work,
 	.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+	.dump_nic_event_log = iwl_dump_nic_event_log,
+	.dump_nic_error_log = iwl_dump_nic_error_log,
 	.load_ucode = iwl5000_load_ucode,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
@@ -1585,6 +1588,8 @@ static struct iwl_lib_ops iwl5150_lib = {
 	.rx_handler_setup = iwl5000_rx_handler_setup,
 	.setup_deferred_work = iwl5000_setup_deferred_work,
 	.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+	.dump_nic_event_log = iwl_dump_nic_event_log,
+	.dump_nic_error_log = iwl_dump_nic_error_log,
 	.load_ucode = iwl5000_load_ucode,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 82b9c93dff54..c295b8ee9228 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -100,6 +100,8 @@ static struct iwl_lib_ops iwl6000_lib = {
 	.setup_deferred_work = iwl5000_setup_deferred_work,
 	.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
 	.load_ucode = iwl5000_load_ucode,
+	.dump_nic_event_log = iwl_dump_nic_event_log,
+	.dump_nic_error_log = iwl_dump_nic_error_log,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 00457bff1ed1..eaafae091f5b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -33,6 +33,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/wireless.h>
@@ -1526,6 +1527,191 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	return ret;
 }
 
+#ifdef CONFIG_IWLWIFI_DEBUG
+static const char *desc_lookup_text[] = {
+	"OK",
+	"FAIL",
+	"BAD_PARAM",
+	"BAD_CHECKSUM",
+	"NMI_INTERRUPT_WDG",
+	"SYSASSERT",
+	"FATAL_ERROR",
+	"BAD_COMMAND",
+	"HW_ERROR_TUNE_LOCK",
+	"HW_ERROR_TEMPERATURE",
+	"ILLEGAL_CHAN_FREQ",
+	"VCC_NOT_STABLE",
+	"FH_ERROR",
+	"NMI_INTERRUPT_HOST",
+	"NMI_INTERRUPT_ACTION_PT",
+	"NMI_INTERRUPT_UNKNOWN",
+	"UCODE_VERSION_MISMATCH",
+	"HW_ERROR_ABS_LOCK",
+	"HW_ERROR_CAL_LOCK_FAIL",
+	"NMI_INTERRUPT_INST_ACTION_PT",
+	"NMI_INTERRUPT_DATA_ACTION_PT",
+	"NMI_TRM_HW_ER",
+	"NMI_INTERRUPT_TRM",
+	"NMI_INTERRUPT_BREAK_POINT"
+	"DEBUG_0",
+	"DEBUG_1",
+	"DEBUG_2",
+	"DEBUG_3",
+	"UNKNOWN"
+};
+
+static const char *desc_lookup(int i)
+{
+	int max = ARRAY_SIZE(desc_lookup_text) - 1;
+
+	if (i < 0 || i > max)
+		i = max;
+
+	return desc_lookup_text[i];
+}
+
+#define ERROR_START_OFFSET  (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
+
+void iwl_dump_nic_error_log(struct iwl_priv *priv)
+{
+	u32 data2, line;
+	u32 desc, time, count, base, data1;
+	u32 blink1, blink2, ilink1, ilink2;
+
+	if (priv->ucode_type == UCODE_INIT)
+		base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
+	else
+		base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
+
+	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
+		return;
+	}
+
+	count = iwl_read_targ_mem(priv, base);
+
+	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+		IWL_ERR(priv, "Start IWL Error Log Dump:\n");
+		IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
+			priv->status, count);
+	}
+
+	desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
+	blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
+	blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
+	ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
+	ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
+	data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
+	data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
+	line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
+	time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
+
+	IWL_ERR(priv, "Desc                               Time       "
+		"data1      data2      line\n");
+	IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
+		desc_lookup(desc), desc, time, data1, data2, line);
+	IWL_ERR(priv, "blink1  blink2  ilink1  ilink2\n");
+	IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
+		ilink1, ilink2);
+
+}
+
+#define EVENT_START_OFFSET  (4 * sizeof(u32))
+
+/**
+ * iwl_print_event_log - Dump error event log to syslog
+ *
+ */
+static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
+				u32 num_events, u32 mode)
+{
+	u32 i;
+	u32 base;       /* SRAM byte address of event log header */
+	u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
+	u32 ptr;        /* SRAM byte address of log data */
+	u32 ev, time, data; /* event log data */
+
+	if (num_events == 0)
+		return;
+	if (priv->ucode_type == UCODE_INIT)
+		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+	else
+		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+
+	if (mode == 0)
+		event_size = 2 * sizeof(u32);
+	else
+		event_size = 3 * sizeof(u32);
+
+	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+	/* "time" is actually "data" for mode 0 (no timestamp).
+	* place event id # at far right for easier visual parsing. */
+	for (i = 0; i < num_events; i++) {
+		ev = iwl_read_targ_mem(priv, ptr);
+		ptr += sizeof(u32);
+		time = iwl_read_targ_mem(priv, ptr);
+		ptr += sizeof(u32);
+		if (mode == 0) {
+			/* data, ev */
+			IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
+		} else {
+			data = iwl_read_targ_mem(priv, ptr);
+			ptr += sizeof(u32);
+			IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
+					time, data, ev);
+		}
+	}
+}
+
+void iwl_dump_nic_event_log(struct iwl_priv *priv)
+{
+	u32 base;       /* SRAM byte address of event log header */
+	u32 capacity;   /* event log capacity in # entries */
+	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
+	u32 num_wraps;  /* # times uCode wrapped to top of log */
+	u32 next_entry; /* index of next entry to be written by uCode */
+	u32 size;       /* # entries that we'll print */
+
+	if (priv->ucode_type == UCODE_INIT)
+		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+	else
+		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+
+	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
+		return;
+	}
+
+	/* event log header */
+	capacity = iwl_read_targ_mem(priv, base);
+	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
+	num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
+	next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
+
+	size = num_wraps ? capacity : next_entry;
+
+	/* bail out if nothing in log */
+	if (size == 0) {
+		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
+		return;
+	}
+
+	IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
+			size, num_wraps);
+
+	/* if uCode has wrapped back to top of log, start at the oldest entry,
+	 * i.e the next one that uCode would fill. */
+	if (num_wraps)
+		iwl_print_event_log(priv, next_entry,
+					capacity - next_entry, mode);
+	/* (then/else) start at top of log */
+	iwl_print_event_log(priv, 0, next_entry, mode);
+
+}
+#endif
+
 /**
  * iwl_alive_start - called after REPLY_ALIVE notification received
  *                   from protocol/runtime uCode (initialization uCode's
@@ -2920,8 +3106,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
  out_pci_disable_device:
 	pci_disable_device(pdev);
  out_ieee80211_free_hw:
-	ieee80211_free_hw(priv->hw);
 	iwl_free_traffic_mem(priv);
+	ieee80211_free_hw(priv->hw);
  out:
 	return err;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 2c5c88fc38f5..4afaf773aeac 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -1154,7 +1154,7 @@ struct iwl_wep_cmd {
 #define RX_RES_PHY_FLAGS_MOD_CCK_MSK		cpu_to_le16(1 << 1)
 #define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK	cpu_to_le16(1 << 2)
 #define RX_RES_PHY_FLAGS_NARROW_BAND_MSK	cpu_to_le16(1 << 3)
-#define RX_RES_PHY_FLAGS_ANTENNA_MSK		cpu_to_le16(0xf0)
+#define RX_RES_PHY_FLAGS_ANTENNA_MSK		0xf0
 #define RX_RES_PHY_FLAGS_ANTENNA_POS		4
 
 #define RX_RES_STATUS_SEC_TYPE_MSK	(0x7 << 8)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index fd26c0dc9c54..2dc928755454 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -29,6 +29,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/etherdevice.h>
+#include <linux/sched.h>
 #include <net/mac80211.h>
 
 #include "iwl-eeprom.h"
@@ -1309,189 +1310,6 @@ static void iwl_print_rx_config_cmd(struct iwl_priv *priv)
 	IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
 	IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
 }
-
-static const char *desc_lookup_text[] = {
-	"OK",
-	"FAIL",
-	"BAD_PARAM",
-	"BAD_CHECKSUM",
-	"NMI_INTERRUPT_WDG",
-	"SYSASSERT",
-	"FATAL_ERROR",
-	"BAD_COMMAND",
-	"HW_ERROR_TUNE_LOCK",
-	"HW_ERROR_TEMPERATURE",
-	"ILLEGAL_CHAN_FREQ",
-	"VCC_NOT_STABLE",
-	"FH_ERROR",
-	"NMI_INTERRUPT_HOST",
-	"NMI_INTERRUPT_ACTION_PT",
-	"NMI_INTERRUPT_UNKNOWN",
-	"UCODE_VERSION_MISMATCH",
-	"HW_ERROR_ABS_LOCK",
-	"HW_ERROR_CAL_LOCK_FAIL",
-	"NMI_INTERRUPT_INST_ACTION_PT",
-	"NMI_INTERRUPT_DATA_ACTION_PT",
-	"NMI_TRM_HW_ER",
-	"NMI_INTERRUPT_TRM",
-	"NMI_INTERRUPT_BREAK_POINT"
-	"DEBUG_0",
-	"DEBUG_1",
-	"DEBUG_2",
-	"DEBUG_3",
-	"UNKNOWN"
-};
-
-static const char *desc_lookup(int i)
-{
-	int max = ARRAY_SIZE(desc_lookup_text) - 1;
-
-	if (i < 0 || i > max)
-		i = max;
-
-	return desc_lookup_text[i];
-}
-
-#define ERROR_START_OFFSET  (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
-
-static void iwl_dump_nic_error_log(struct iwl_priv *priv)
-{
-	u32 data2, line;
-	u32 desc, time, count, base, data1;
-	u32 blink1, blink2, ilink1, ilink2;
-
-	if (priv->ucode_type == UCODE_INIT)
-		base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
-	else
-		base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
-
-	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
-		IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
-		return;
-	}
-
-	count = iwl_read_targ_mem(priv, base);
-
-	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
-		IWL_ERR(priv, "Start IWL Error Log Dump:\n");
-		IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
-			priv->status, count);
-	}
-
-	desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
-	blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
-	blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
-	ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
-	ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
-	data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
-	data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
-	line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
-	time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
-
-	IWL_ERR(priv, "Desc                               Time       "
-		"data1      data2      line\n");
-	IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
-		desc_lookup(desc), desc, time, data1, data2, line);
-	IWL_ERR(priv, "blink1  blink2  ilink1  ilink2\n");
-	IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
-		ilink1, ilink2);
-
-}
-
-#define EVENT_START_OFFSET  (4 * sizeof(u32))
-
-/**
- * iwl_print_event_log - Dump error event log to syslog
- *
- */
-static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
-				u32 num_events, u32 mode)
-{
-	u32 i;
-	u32 base;       /* SRAM byte address of event log header */
-	u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
-	u32 ptr;        /* SRAM byte address of log data */
-	u32 ev, time, data; /* event log data */
-
-	if (num_events == 0)
-		return;
-	if (priv->ucode_type == UCODE_INIT)
-		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
-	else
-		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
-	if (mode == 0)
-		event_size = 2 * sizeof(u32);
-	else
-		event_size = 3 * sizeof(u32);
-
-	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
-
-	/* "time" is actually "data" for mode 0 (no timestamp).
-	* place event id # at far right for easier visual parsing. */
-	for (i = 0; i < num_events; i++) {
-		ev = iwl_read_targ_mem(priv, ptr);
-		ptr += sizeof(u32);
-		time = iwl_read_targ_mem(priv, ptr);
-		ptr += sizeof(u32);
-		if (mode == 0) {
-			/* data, ev */
-			IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
-		} else {
-			data = iwl_read_targ_mem(priv, ptr);
-			ptr += sizeof(u32);
-			IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
-					time, data, ev);
-		}
-	}
-}
-
-void iwl_dump_nic_event_log(struct iwl_priv *priv)
-{
-	u32 base;       /* SRAM byte address of event log header */
-	u32 capacity;   /* event log capacity in # entries */
-	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
-	u32 num_wraps;  /* # times uCode wrapped to top of log */
-	u32 next_entry; /* index of next entry to be written by uCode */
-	u32 size;       /* # entries that we'll print */
-
-	if (priv->ucode_type == UCODE_INIT)
-		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
-	else
-		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
-	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
-		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
-		return;
-	}
-
-	/* event log header */
-	capacity = iwl_read_targ_mem(priv, base);
-	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
-	num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
-	next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
-
-	size = num_wraps ? capacity : next_entry;
-
-	/* bail out if nothing in log */
-	if (size == 0) {
-		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
-		return;
-	}
-
-	IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
-			size, num_wraps);
-
-	/* if uCode has wrapped back to top of log, start at the oldest entry,
-	 * i.e the next one that uCode would fill. */
-	if (num_wraps)
-		iwl_print_event_log(priv, next_entry,
-					capacity - next_entry, mode);
-	/* (then/else) start at top of log */
-	iwl_print_event_log(priv, 0, next_entry, mode);
-
-}
 #endif
 /**
  * iwl_irq_handle_error - called for HW or SW error interrupt from card
@@ -1506,8 +1324,8 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) {
-		iwl_dump_nic_error_log(priv);
-		iwl_dump_nic_event_log(priv);
+		priv->cfg->ops->lib->dump_nic_error_log(priv);
+		priv->cfg->ops->lib->dump_nic_event_log(priv);
 		iwl_print_rx_config_cmd(priv);
 	}
 #endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 7ff9ffb2b702..e50103a956b1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -166,6 +166,8 @@ struct iwl_lib_ops {
 	int (*is_valid_rtc_data_addr)(u32 addr);
 	/* 1st ucode load */
 	int (*load_ucode)(struct iwl_priv *priv);
+	void (*dump_nic_event_log)(struct iwl_priv *priv);
+	void (*dump_nic_error_log)(struct iwl_priv *priv);
 	/* power management */
 	struct iwl_apm_ops apm_ops;
 
@@ -540,7 +542,19 @@ int iwl_pci_resume(struct pci_dev *pdev);
 /*****************************************************
 *  Error Handling Debugging
 ******************************************************/
+#ifdef CONFIG_IWLWIFI_DEBUG
 void iwl_dump_nic_event_log(struct iwl_priv *priv);
+void iwl_dump_nic_error_log(struct iwl_priv *priv);
+#else
+static inline void iwl_dump_nic_event_log(struct iwl_priv *priv)
+{
+}
+
+static inline void iwl_dump_nic_error_log(struct iwl_priv *priv)
+{
+}
+#endif
+
 void iwl_clear_isr_stats(struct iwl_priv *priv);
 
 /*****************************************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index fb844859a443..a198bcf61022 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -410,7 +410,7 @@ static ssize_t iwl_dbgfs_nvm_read(struct file *file,
 		pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs);
 		hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos,
 				   buf_size - pos, 0);
-		pos += strlen(buf);
+		pos += strlen(buf + pos);
 		if (buf_size - pos > 0)
 			buf[pos++] = '\n';
 	}
@@ -436,7 +436,7 @@ static ssize_t iwl_dbgfs_log_event_write(struct file *file,
 	if (sscanf(buf, "%d", &event_log_flag) != 1)
 		return -EFAULT;
 	if (event_log_flag == 1)
-		iwl_dump_nic_event_log(priv);
+		priv->cfg->ops->lib->dump_nic_event_log(priv);
 
 	return count;
 }
@@ -909,7 +909,7 @@ static ssize_t iwl_dbgfs_traffic_log_read(struct file *file,
 						"0x%.4x ", ofs);
 				hex_dump_to_buffer(ptr + ofs, 16, 16, 2,
 						   buf + pos, bufsz - pos, 0);
-				pos += strlen(buf);
+				pos += strlen(buf + pos);
 				if (bufsz - pos > 0)
 					buf[pos++] = '\n';
 			}
@@ -932,7 +932,7 @@ static ssize_t iwl_dbgfs_traffic_log_read(struct file *file,
 						"0x%.4x ", ofs);
 				hex_dump_to_buffer(ptr + ofs, 16, 16, 2,
 						   buf + pos, bufsz - pos, 0);
-				pos += strlen(buf);
+				pos += strlen(buf + pos);
 				if (bufsz - pos > 0)
 					buf[pos++] = '\n';
 			}
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 3d2b93a61e62..e14c9952a935 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -410,7 +410,6 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
 					u16 *validblockaddr)
 {
 	u16 next_link_addr = 0, link_value = 0, valid_addr;
-	int ret = 0;
 	int usedblocks = 0;
 
 	/* set addressing mode to absolute to traverse the link list */
@@ -430,29 +429,29 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
 		 * check for more block on the link list
 		 */
 		valid_addr = next_link_addr;
-		next_link_addr = link_value;
+		next_link_addr = link_value * sizeof(u16);
 		IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
 			       usedblocks, next_link_addr);
 		if (iwl_read_otp_word(priv, next_link_addr, &link_value))
 			return -EINVAL;
 		if (!link_value) {
 			/*
-			 * reach the end of link list,
+			 * reach the end of link list, return success and
 			 * set address point to the starting address
 			 * of the image
 			 */
-			goto done;
+			*validblockaddr = valid_addr;
+			/* skip first 2 bytes (link list pointer) */
+			*validblockaddr += 2;
+			return 0;
 		}
 		/* more in the link list, continue */
 		usedblocks++;
-	} while (usedblocks < priv->cfg->max_ll_items);
-	/* OTP full, use last block */
-	IWL_DEBUG_INFO(priv, "OTP is full, use last block\n");
-done:
-	*validblockaddr = valid_addr;
-	/* skip first 2 bytes (link list pointer) */
-	*validblockaddr += 2;
-	return ret;
+	} while (usedblocks <= priv->cfg->max_ll_items);
+
+	/* OTP has no valid blocks */
+	IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n");
+	return -EINVAL;
 }
 
 /**
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 6b68db7b1b81..80b9e45d9b9c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -220,35 +220,35 @@ struct iwl_eeprom_enhanced_txpwr {
  * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
  */
 /* 2.4 GHz band: CCK */
-#define EEPROM_LB_CCK_20_COMMON       ((0xAA)\
+#define EEPROM_LB_CCK_20_COMMON       ((0xA8)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 8 bytes */
 /* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_LB_OFDM_COMMON       ((0xB2)\
+#define EEPROM_LB_OFDM_COMMON       ((0xB0)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
 /* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_HB_OFDM_COMMON       ((0xCA)\
+#define EEPROM_HB_OFDM_COMMON       ((0xC8)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
 /* 2.4GHz band channels:
  *	1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
-#define EEPROM_LB_OFDM_20_BAND       ((0xE2)\
+#define EEPROM_LB_OFDM_20_BAND       ((0xE0)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 64 bytes */
 /* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
-#define EEPROM_LB_OFDM_HT40_BAND       ((0x122)\
+#define EEPROM_LB_OFDM_HT40_BAND       ((0x120)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 40 bytes */
 /* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
-#define EEPROM_HB_OFDM_20_BAND       ((0x14A)\
+#define EEPROM_HB_OFDM_20_BAND       ((0x148)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 48 bytes */
 /* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND       ((0x17A)\
+#define EEPROM_HB_OFDM_HT40_BAND       ((0x178)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
 /* 2.4 GHz band, channnel 13: Legacy, HT */
-#define EEPROM_LB_OFDM_20_CHANNEL_13       ((0x192)\
+#define EEPROM_LB_OFDM_20_CHANNEL_13       ((0x190)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
 /* 5.2 GHz band, channnel 140: Legacy, HT */
-#define EEPROM_HB_OFDM_20_CHANNEL_140       ((0x1A2)\
+#define EEPROM_HB_OFDM_20_CHANNEL_140       ((0x1A0)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
 /* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND_1       ((0x1B2)\
+#define EEPROM_HB_OFDM_HT40_BAND_1       ((0x1B0)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
 
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 532c8d6cd8da..a6856daf14cb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -28,6 +28,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <net/mac80211.h>
 
 #include "iwl-dev.h" /* FIXME: remove */
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 8e1bb53c0aa3..493626bcd3ec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -1044,7 +1044,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 	 * as a bitmask.
 	 */
 	rx_status.antenna =
-		le16_to_cpu(phy_res->phy_flags & RX_RES_PHY_FLAGS_ANTENNA_MSK)
+		(le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
 		>> RX_RES_PHY_FLAGS_ANTENNA_POS;
 
 	/* set the preamble flag if appropriate */
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index a7422e52d883..fb9bcfa6d947 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -28,6 +28,7 @@
  *****************************************************************************/
 
 #include <linux/etherdevice.h>
+#include <linux/sched.h>
 #include <net/mac80211.h>
 #include "iwl-eeprom.h"
 #include "iwl-dev.h"
@@ -197,6 +198,12 @@ void iwl_cmd_queue_free(struct iwl_priv *priv)
 		pci_free_consistent(dev, priv->hw_params.tfd_size *
 				    txq->q.n_bd, txq->tfds, txq->q.dma_addr);
 
+	/* deallocate arrays */
+	kfree(txq->cmd);
+	kfree(txq->meta);
+	txq->cmd = NULL;
+	txq->meta = NULL;
+
 	/* 0-fill queue descriptor structure */
 	memset(txq, 0, sizeof(*txq));
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4f2d43937283..d00a80334095 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -33,6 +33,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/wireless.h>
@@ -1481,6 +1482,7 @@ static inline void iwl_synchronize_irq(struct iwl_priv *priv)
 	tasklet_kill(&priv->irq_tasklet);
 }
 
+#ifdef CONFIG_IWLWIFI_DEBUG
 static const char *desc_lookup(int i)
 {
 	switch (i) {
@@ -1504,7 +1506,7 @@ static const char *desc_lookup(int i)
 #define ERROR_START_OFFSET  (1 * sizeof(u32))
 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
 
-static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
+void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
 {
 	u32 i;
 	u32 desc, time, count, base, data1;
@@ -1598,7 +1600,7 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
 	}
 }
 
-static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
+void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 {
 	u32 base;       /* SRAM byte address of event log header */
 	u32 capacity;   /* event log capacity in # entries */
@@ -1640,6 +1642,16 @@ static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 	iwl3945_print_event_log(priv, 0, next_entry, mode);
 
 }
+#else
+void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
+{
+}
+
+void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
+{
+}
+
+#endif
 
 static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 {
@@ -3683,21 +3695,6 @@ static ssize_t dump_error_log(struct device *d,
 
 static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
 
-static ssize_t dump_event_log(struct device *d,
-			      struct device_attribute *attr,
-			      const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	char *p = (char *)buf;
-
-	if (p[0] == '1')
-		iwl3945_dump_nic_event_log(priv);
-
-	return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log);
-
 /*****************************************************************************
  *
  * driver setup and tear down
@@ -3742,7 +3739,6 @@ static struct attribute *iwl3945_sysfs_entries[] = {
 	&dev_attr_antenna.attr,
 	&dev_attr_channels.attr,
 	&dev_attr_dump_errors.attr,
-	&dev_attr_dump_events.attr,
 	&dev_attr_flags.attr,
 	&dev_attr_filter_flags.attr,
 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
@@ -4101,8 +4097,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	pci_set_drvdata(pdev, NULL);
 	pci_disable_device(pdev);
  out_ieee80211_free_hw:
-	ieee80211_free_hw(priv->hw);
 	iwl_free_traffic_mem(priv);
+	ieee80211_free_hw(priv->hw);
  out:
 	return err;
 }
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
index a56a2b0ac99a..f3c55658225b 100644
--- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
@@ -23,6 +23,7 @@
 
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/sched.h>
 #include <linux/etherdevice.h>
 #include <linux/wireless.h>
 #include <linux/ieee80211.h>
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 23b52fa2605f..84158b6d35d8 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -40,6 +40,7 @@
 #include <linux/wireless.h>
 #include <linux/etherdevice.h>
 #include <linux/ieee80211.h>
+#include <linux/sched.h>
 
 #include "iwm.h"
 #include "bus.h"
diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c
index d668e4756324..222eb2cf1b30 100644
--- a/drivers/net/wireless/iwmc3200wifi/main.c
+++ b/drivers/net/wireless/iwmc3200wifi/main.c
@@ -38,6 +38,7 @@
 
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/sched.h>
 #include <linux/ieee80211.h>
 #include <linux/wireless.h>
 
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 40dbcbc16593..771a301003c9 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -38,6 +38,7 @@
 
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/sched.h>
 #include <linux/etherdevice.h>
 #include <linux/wireless.h>
 #include <linux/ieee80211.h>
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 685098148e10..0a324dcd264c 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -6,6 +6,7 @@
 #include <net/iw_handler.h>
 #include <net/lib80211.h>
 #include <linux/kfifo.h>
+#include <linux/sched.h>
 #include "host.h"
 #include "hostcmd.h"
 #include "decl.h"
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index c42d3faa2660..23f684337fdd 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -3,6 +3,7 @@
   * responses as well as events generated by firmware.
   */
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include <linux/if_arp.h>
 #include <linux/netdevice.h>
 #include <asm/unaligned.h>
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index 4c018f7a0a8d..8c3766a6e8e7 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -3,6 +3,7 @@
   */
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/sched.h>
 
 #include "hostcmd.h"
 #include "radiotap.h"
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 896f532182f0..38cfd79e0590 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -631,6 +631,9 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 		data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000;
 		if (WARN_ON(!data->beacon_int))
 			data->beacon_int = 1;
+		if (data->started)
+			mod_timer(&data->beacon_timer,
+				  jiffies + data->beacon_int);
 	}
 
 	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index 4c97c6ad6f5d..bc08464d8323 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -19,6 +19,7 @@
  *
  */
 
+#include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/if_arp.h>
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index e26d7b3ceab5..2505be56ae39 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -23,6 +23,7 @@
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
 #include <linux/if_arp.h>
diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c
index f7c677e2094d..69d2f882fd06 100644
--- a/drivers/net/wireless/prism54/islpci_mgt.c
+++ b/drivers/net/wireless/prism54/islpci_mgt.c
@@ -20,6 +20,7 @@
 #include <linux/netdevice.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/sched.h>
 
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 88cd58eb3b9f..1c88c2ea59aa 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2879,7 +2879,7 @@ static int write_essid(struct file *file, const char __user *buffer,
 		       unsigned long count, void *data)
 {
 	static char proc_essid[33];
-	int len = count;
+	unsigned int len = count;
 
 	if (len > 32)
 		len = 32;
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 7b3ee8c2eaef..68bc9bb1dbf9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/uaccess.h>
 
 #include "rt2x00.h"
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 1cbd9b4a3efc..b8f5ee33445e 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2381,6 +2381,7 @@ static struct usb_device_id rt73usb_device_table[] = {
 	/* Huawei-3Com */
 	{ USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Hercules */
+	{ USB_DEVICE(0x06f8, 0xe002), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Linksys */
diff --git a/drivers/net/znet.c b/drivers/net/znet.c
index a0384b6f09b6..b42347333750 100644
--- a/drivers/net/znet.c
+++ b/drivers/net/znet.c
@@ -169,7 +169,6 @@ static void znet_tx_timeout (struct net_device *dev);
 static int znet_request_resources (struct net_device *dev)
 {
 	struct znet_private *znet = netdev_priv(dev);
-	unsigned long flags;
 
 	if (request_irq (dev->irq, &znet_interrupt, 0, "ZNet", dev))
 		goto failed;
@@ -187,13 +186,9 @@ static int znet_request_resources (struct net_device *dev)
  free_sia:
 	release_region (znet->sia_base, znet->sia_size);
  free_tx_dma:
-	flags = claim_dma_lock();
 	free_dma (znet->tx_dma);
-	release_dma_lock (flags);
  free_rx_dma:
-	flags = claim_dma_lock();
 	free_dma (znet->rx_dma);
-	release_dma_lock (flags);
  free_irq:
 	free_irq (dev->irq, dev);
  failed:
@@ -203,14 +198,11 @@ static int znet_request_resources (struct net_device *dev)
 static void znet_release_resources (struct net_device *dev)
 {
 	struct znet_private *znet = netdev_priv(dev);
-	unsigned long flags;
 
 	release_region (znet->sia_base, znet->sia_size);
 	release_region (dev->base_addr, znet->io_size);
-	flags = claim_dma_lock();
 	free_dma (znet->tx_dma);
 	free_dma (znet->rx_dma);
-	release_dma_lock (flags);
 	free_irq (dev->irq, dev);
 }
 
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index bacaa536fd51..4b22ba568b19 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -97,6 +97,12 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 }
 EXPORT_SYMBOL(of_mdiobus_register);
 
+/* Helper function for of_phy_find_device */
+static int of_phy_match(struct device *dev, void *phy_np)
+{
+	return dev_archdata_get_node(&dev->archdata) == phy_np;
+}
+
 /**
  * of_phy_find_device - Give a PHY node, find the phy_device
  * @phy_np: Pointer to the phy's device tree node
@@ -106,15 +112,10 @@ EXPORT_SYMBOL(of_mdiobus_register);
 struct phy_device *of_phy_find_device(struct device_node *phy_np)
 {
 	struct device *d;
-	int match(struct device *dev, void *phy_np)
-	{
-		return dev_archdata_get_node(&dev->archdata) == phy_np;
-	}
-
 	if (!phy_np)
 		return NULL;
 
-	d = bus_find_device(&mdio_bus_type, NULL, phy_np, match);
+	d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match);
 	return d ? to_phy_device(d) : NULL;
 }
 EXPORT_SYMBOL(of_phy_find_device);
diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c
index 2b7ae366ceb1..5df60a6b6776 100644
--- a/drivers/oprofile/event_buffer.c
+++ b/drivers/oprofile/event_buffer.c
@@ -35,12 +35,23 @@ static size_t buffer_pos;
 /* atomic_t because wait_event checks it outside of buffer_mutex */
 static atomic_t buffer_ready = ATOMIC_INIT(0);
 
-/* Add an entry to the event buffer. When we
- * get near to the end we wake up the process
- * sleeping on the read() of the file.
+/*
+ * Add an entry to the event buffer. When we get near to the end we
+ * wake up the process sleeping on the read() of the file. To protect
+ * the event_buffer this function may only be called when buffer_mutex
+ * is set.
  */
 void add_event_entry(unsigned long value)
 {
+	/*
+	 * This shouldn't happen since all workqueues or handlers are
+	 * canceled or flushed before the event buffer is freed.
+	 */
+	if (!event_buffer) {
+		WARN_ON_ONCE(1);
+		return;
+	}
+
 	if (buffer_pos == buffer_size) {
 		atomic_inc(&oprofile_stats.event_lost_overflow);
 		return;
@@ -69,7 +80,6 @@ void wake_up_buffer_waiter(void)
 
 int alloc_event_buffer(void)
 {
-	int err = -ENOMEM;
 	unsigned long flags;
 
 	spin_lock_irqsave(&oprofilefs_lock, flags);
@@ -80,21 +90,22 @@ int alloc_event_buffer(void)
 	if (buffer_watershed >= buffer_size)
 		return -EINVAL;
 
+	buffer_pos = 0;
 	event_buffer = vmalloc(sizeof(unsigned long) * buffer_size);
 	if (!event_buffer)
-		goto out;
+		return -ENOMEM;
 
-	err = 0;
-out:
-	return err;
+	return 0;
 }
 
 
 void free_event_buffer(void)
 {
+	mutex_lock(&buffer_mutex);
 	vfree(event_buffer);
-
+	buffer_pos = 0;
 	event_buffer = NULL;
+	mutex_unlock(&buffer_mutex);
 }
 
 
@@ -167,6 +178,12 @@ static ssize_t event_buffer_read(struct file *file, char __user *buf,
 
 	mutex_lock(&buffer_mutex);
 
+	/* May happen if the buffer is freed during pending reads. */
+	if (!event_buffer) {
+		retval = -EINTR;
+		goto out;
+	}
+
 	atomic_set(&buffer_ready, 0);
 
 	retval = -EFAULT;
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index 14bbaa17e2ca..22b02c6df854 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -354,6 +354,7 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
 	struct acpi_dmar_hardware_unit *drhd;
 	struct acpi_dmar_reserved_memory *rmrr;
 	struct acpi_dmar_atsr *atsr;
+	struct acpi_dmar_rhsa *rhsa;
 
 	switch (header->type) {
 	case ACPI_DMAR_TYPE_HARDWARE_UNIT:
@@ -375,6 +376,12 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
 		atsr = container_of(header, struct acpi_dmar_atsr, header);
 		printk(KERN_INFO PREFIX "ATSR flags: %#x\n", atsr->flags);
 		break;
+	case ACPI_DMAR_HARDWARE_AFFINITY:
+		rhsa = container_of(header, struct acpi_dmar_rhsa, header);
+		printk(KERN_INFO PREFIX "RHSA base: %#016Lx proximity domain: %#x\n",
+		       (unsigned long long)rhsa->base_address,
+		       rhsa->proximity_domain);
+		break;
 	}
 }
 
@@ -459,9 +466,13 @@ parse_dmar_table(void)
 			ret = dmar_parse_one_atsr(entry_header);
 #endif
 			break;
+		case ACPI_DMAR_HARDWARE_AFFINITY:
+			/* We don't do anything with RHSA (yet?) */
+			break;
 		default:
 			printk(KERN_WARNING PREFIX
-				"Unknown DMAR structure type\n");
+				"Unknown DMAR structure type %d\n",
+				entry_header->type);
 			ret = 0; /* for forward compatibility */
 			break;
 		}
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 53836001d511..9c6a9fd26812 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -32,6 +32,7 @@
 #include <asm/io.h>		/* for read? and write? functions */
 #include <linux/delay.h>	/* for delays */
 #include <linux/mutex.h>
+#include <linux/sched.h>	/* for signal_pending() */
 
 #define MY_NAME	"cpqphp"
 
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 855dd7ca47f3..b1e97e682500 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -48,6 +48,7 @@
 
 #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
 #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
+#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
 
 #define IOAPIC_RANGE_START	(0xfee00000)
 #define IOAPIC_RANGE_END	(0xfeefffff)
@@ -94,6 +95,7 @@ static inline unsigned long virt_to_dma_pfn(void *p)
 /* global iommu list, set NULL for ignored DMAR units */
 static struct intel_iommu **g_iommus;
 
+static void __init check_tylersburg_isoch(void);
 static int rwbf_quirk;
 
 /*
@@ -1934,6 +1936,9 @@ error:
 }
 
 static int iommu_identity_mapping;
+#define IDENTMAP_ALL		1
+#define IDENTMAP_GFX		2
+#define IDENTMAP_AZALIA		4
 
 static int iommu_domain_identity_map(struct dmar_domain *domain,
 				     unsigned long long start,
@@ -2151,8 +2156,14 @@ static int domain_add_dev_info(struct dmar_domain *domain,
 
 static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
 {
-	if (iommu_identity_mapping == 2)
-		return IS_GFX_DEVICE(pdev);
+	if ((iommu_identity_mapping & IDENTMAP_AZALIA) && IS_AZALIA(pdev))
+		return 1;
+
+	if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev))
+		return 1;
+
+	if (!(iommu_identity_mapping & IDENTMAP_ALL))
+		return 0;
 
 	/*
 	 * We want to start off with all devices in the 1:1 domain, and
@@ -2332,11 +2343,14 @@ int __init init_dmars(void)
 	}
 
 	if (iommu_pass_through)
-		iommu_identity_mapping = 1;
+		iommu_identity_mapping |= IDENTMAP_ALL;
+
 #ifdef CONFIG_DMAR_BROKEN_GFX_WA
-	else
-		iommu_identity_mapping = 2;
+	iommu_identity_mapping |= IDENTMAP_GFX;
 #endif
+
+	check_tylersburg_isoch();
+
 	/*
 	 * If pass through is not set or not enabled, setup context entries for
 	 * identity mappings for rmrr, gfx, and isa and may fall back to static
@@ -3670,3 +3684,61 @@ static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
+
+/* On Tylersburg chipsets, some BIOSes have been known to enable the
+   ISOCH DMAR unit for the Azalia sound device, but not give it any
+   TLB entries, which causes it to deadlock. Check for that.  We do
+   this in a function called from init_dmars(), instead of in a PCI
+   quirk, because we don't want to print the obnoxious "BIOS broken"
+   message if VT-d is actually disabled.
+*/
+static void __init check_tylersburg_isoch(void)
+{
+	struct pci_dev *pdev;
+	uint32_t vtisochctrl;
+
+	/* If there's no Azalia in the system anyway, forget it. */
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x3a3e, NULL);
+	if (!pdev)
+		return;
+	pci_dev_put(pdev);
+
+	/* System Management Registers. Might be hidden, in which case
+	   we can't do the sanity check. But that's OK, because the
+	   known-broken BIOSes _don't_ actually hide it, so far. */
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x342e, NULL);
+	if (!pdev)
+		return;
+
+	if (pci_read_config_dword(pdev, 0x188, &vtisochctrl)) {
+		pci_dev_put(pdev);
+		return;
+	}
+
+	pci_dev_put(pdev);
+
+	/* If Azalia DMA is routed to the non-isoch DMAR unit, fine. */
+	if (vtisochctrl & 1)
+		return;
+
+	/* Drop all bits other than the number of TLB entries */
+	vtisochctrl &= 0x1c;
+
+	/* If we have the recommended number of TLB entries (16), fine. */
+	if (vtisochctrl == 0x10)
+		return;
+
+	/* Zero TLB entries? You get to ride the short bus to school. */
+	if (!vtisochctrl) {
+		WARN(1, "Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.\n"
+		     "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
+		     dmi_get_system_info(DMI_BIOS_VENDOR),
+		     dmi_get_system_info(DMI_BIOS_VERSION),
+		     dmi_get_system_info(DMI_PRODUCT_VERSION));
+		iommu_identity_mapping |= IDENTMAP_AZALIA;
+		return;
+	}
+	
+	printk(KERN_WARNING "DMAR: Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n",
+	       vtisochctrl);
+}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6edecff0b419..4e4c295a049f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -513,7 +513,11 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
 		udelay(PCI_PM_D2_DELAY);
 
-	dev->current_state = state;
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+	dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+	if (dev->current_state != state && printk_ratelimit())
+		dev_info(&dev->dev, "Refused to change power state, "
+			"currently in D%d\n", dev->current_state);
 
 	/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
 	 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
@@ -2542,10 +2546,10 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
 
 /**
  * pci_set_vga_state - set VGA decode state on device and parents if requested
- * @dev the PCI device
- * @decode - true = enable decoding, false = disable decoding
- * @command_bits PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
- * @change_bridge - traverse ancestors and change bridges
+ * @dev: the PCI device
+ * @decode: true = enable decoding, false = disable decoding
+ * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
+ * @change_bridge: traverse ancestors and change bridges
  */
 int pci_set_vga_state(struct pci_dev *dev, bool decode,
 		      unsigned int command_bits, bool change_bridge)
@@ -2719,17 +2723,6 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
 	return 1;
 }
 
-static int __devinit pci_init(void)
-{
-	struct pci_dev *dev = NULL;
-
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		pci_fixup_device(pci_fixup_final, dev);
-	}
-
-	return 0;
-}
-
 static int __init pci_setup(char *str)
 {
 	while (str) {
@@ -2767,8 +2760,6 @@ static int __init pci_setup(char *str)
 }
 early_param("pci", pci_setup);
 
-device_initcall(pci_init);
-
 EXPORT_SYMBOL(pci_reenable_device);
 EXPORT_SYMBOL(pci_enable_device_io);
 EXPORT_SYMBOL(pci_enable_device_mem);
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 2ce8f9ccc66e..40c3cc5d1caf 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -17,6 +17,7 @@
 
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/pm.h>
@@ -52,7 +53,7 @@ static struct pci_error_handlers aer_error_handlers = {
 
 static struct pcie_port_service_driver aerdriver = {
 	.name		= "aer",
-	.port_type	= PCIE_ANY_PORT,
+	.port_type	= PCIE_RC_PORT,
 	.service	= PCIE_PORT_SERVICE_AER,
 
 	.probe		= aer_probe,
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 6df5c984a791..f635e476d632 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -30,7 +30,6 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 /* global data */
-static const char device_name[] = "pcieport-driver";
 
 static int pcie_portdrv_restore_config(struct pci_dev *dev)
 {
@@ -262,7 +261,7 @@ static struct pci_error_handlers pcie_portdrv_err_handler = {
 };
 
 static struct pci_driver pcie_portdriver = {
-	.name		= (char *)device_name,
+	.name		= "pcieport",
 	.id_table	= &port_pci_ids[0],
 
 	.probe		= pcie_portdrv_probe,
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 6099facecd79..245d2cdb4765 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -670,6 +670,25 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8235,	quirk_vt8235_acpi);
 
+/*
+ * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
+ *	Disable fast back-to-back on the secondary bus segment
+ */
+static void __devinit quirk_xio2000a(struct pci_dev *dev)
+{
+	struct pci_dev *pdev;
+	u16 command;
+
+	dev_warn(&dev->dev, "TI XIO2000a quirk detected; "
+		"secondary bus fast back-to-back transfers disabled\n");
+	list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
+		pci_read_config_word(pdev, PCI_COMMAND, &command);
+		if (command & PCI_COMMAND_FAST_BACK)
+			pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
+			quirk_xio2000a);
 
 #ifdef CONFIG_X86_IO_APIC 
 
@@ -990,7 +1009,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82454NX,
 
 static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
 {
-	/* set SBX00 SATA in IDE mode to AHCI mode */
+	/* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
 	u8 tmp;
 
 	pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
@@ -1009,8 +1028,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
 
 /*
  *	Serverworks CSB5 IDE does not fully support native mode
@@ -2572,6 +2591,19 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
 	}
 	pci_do_fixups(dev, start, end);
 }
+
+static int __init pci_apply_final_quirks(void)
+{
+	struct pci_dev *dev = NULL;
+
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		pci_fixup_device(pci_fixup_final, dev);
+	}
+
+	return 0;
+}
+
+fs_initcall_sync(pci_apply_final_quirks);
 #else
 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {}
 #endif
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 706f82d8111f..c54526b206b5 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -205,43 +205,6 @@ int pci_assign_resource(struct pci_dev *dev, int resno)
 	return ret;
 }
 
-#if 0
-int pci_assign_resource_fixed(struct pci_dev *dev, int resno)
-{
-	struct pci_bus *bus = dev->bus;
-	struct resource *res = dev->resource + resno;
-	unsigned int type_mask;
-	int i, ret = -EBUSY;
-
-	type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH;
-
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		struct resource *r = bus->resource[i];
-		if (!r)
-			continue;
-
-		/* type_mask must match */
-		if ((res->flags ^ r->flags) & type_mask)
-			continue;
-
-		ret = request_resource(r, res);
-
-		if (ret == 0)
-			break;
-	}
-
-	if (ret) {
-		dev_err(&dev->dev, "BAR %d: can't allocate %s resource %pR\n",
-			resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res);
-	} else if (resno < PCI_BRIDGE_RESOURCES) {
-		pci_update_resource(dev, resno);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pci_assign_resource_fixed);
-#endif
-
 /* Sort resources by alignment */
 void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head)
 {
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index fbf965b31c14..17f38a781d47 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -192,6 +192,10 @@ config PCMCIA_AU1X00
 	tristate "Au1x00 pcmcia support"
 	depends on SOC_AU1X00 && PCMCIA
 
+config PCMCIA_BCM63XX
+	tristate "bcm63xx pcmcia support"
+	depends on BCM63XX && PCMCIA
+
 config PCMCIA_SA1100
 	tristate "SA1100 support"
 	depends on ARM && ARCH_SA1100 && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 3247828aa203..a03a38acd77d 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_core.o sa1111_cs.o
 obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o
 obj-$(CONFIG_M32R_CFC)				+= m32r_cfc.o
 obj-$(CONFIG_PCMCIA_AU1X00)			+= au1x00_ss.o
+obj-$(CONFIG_PCMCIA_BCM63XX)			+= bcm63xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
 obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
 obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 9e1140f085fd..e1dccedc5960 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -363,7 +363,7 @@ static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
 	struct at91_cf_data	*board = cf->board;
 
-	pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+	pcmcia_socket_dev_suspend(&pdev->dev);
 	if (device_may_wakeup(&pdev->dev)) {
 		enable_irq_wake(board->det_pin);
 		if (board->irq_pin)
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 90013341cd5f..02088704ac2c 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -515,7 +515,7 @@ static int au1x00_drv_pcmcia_probe(struct platform_device *dev)
 static int au1x00_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int au1x00_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.c b/drivers/pcmcia/bcm63xx_pcmcia.c
new file mode 100644
index 000000000000..bc88a3b19bb3
--- /dev/null
+++ b/drivers/pcmcia/bcm63xx_pcmcia.c
@@ -0,0 +1,536 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include "bcm63xx_pcmcia.h"
+
+#define PFX	"bcm63xx_pcmcia: "
+
+#ifdef CONFIG_CARDBUS
+/* if cardbus is used, platform device needs reference to actual pci
+ * device */
+static struct pci_dev *bcm63xx_cb_dev;
+#endif
+
+/*
+ * read/write helper for pcmcia regs
+ */
+static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
+{
+	return bcm_readl(skt->base + off);
+}
+
+static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
+				 u32 val, u32 off)
+{
+	bcm_writel(val, skt->base + off);
+}
+
+/*
+ * This callback should (re-)initialise the socket, turn on status
+ * interrupts and PCMCIA bus, and wait for power to stabilise so that
+ * the card status signals report correctly.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
+{
+	return 0;
+}
+
+/*
+ * This callback should remove power on the socket, disable IRQs from
+ * the card, turn off status interrupts, and disable the PCMCIA bus.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
+{
+	return 0;
+}
+
+/*
+ * Implements the set_socket() operation for the in-kernel PCMCIA
+ * service (formerly SS_SetSocket in Card Services). We more or
+ * less punt all of this work and let the kernel handle the details
+ * of power configuration, reset, &c. We also record the value of
+ * `state' in order to regurgitate it to the PCMCIA core later.
+ */
+static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
+				     socket_state_t *state)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	unsigned long flags;
+	u32 val;
+
+	skt = sock->driver_data;
+
+	spin_lock_irqsave(&skt->lock, flags);
+
+	/* note: hardware cannot control socket power, so we will
+	 * always report SS_POWERON */
+
+	/* apply socket reset */
+	val = pcmcia_readl(skt, PCMCIA_C1_REG);
+	if (state->flags & SS_RESET)
+		val |= PCMCIA_C1_RESET_MASK;
+	else
+		val &= ~PCMCIA_C1_RESET_MASK;
+
+	/* reverse reset logic for cardbus card */
+	if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
+		val ^= PCMCIA_C1_RESET_MASK;
+
+	pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+	/* keep requested state for event reporting */
+	skt->requested_state = *state;
+
+	spin_unlock_irqrestore(&skt->lock, flags);
+
+	return 0;
+}
+
+/*
+ * identity cardtype from VS[12] input, CD[12] input while only VS2 is
+ * floating, and CD[12] input while only VS1 is floating
+ */
+enum {
+	IN_VS1 = (1 << 0),
+	IN_VS2 = (1 << 1),
+	IN_CD1_VS2H = (1 << 2),
+	IN_CD2_VS2H = (1 << 3),
+	IN_CD1_VS1H = (1 << 4),
+	IN_CD2_VS1H = (1 << 5),
+};
+
+static const u8 vscd_to_cardtype[] = {
+
+	/* VS1 float, VS2 float */
+	[IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
+
+	/* VS1 grounded, VS2 float */
+	[IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
+
+	/* VS1 grounded, VS2 grounded */
+	[0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
+
+	/* VS1 tied to CD1, VS2 float */
+	[IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
+
+	/* VS1 grounded, VS2 tied to CD2 */
+	[IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
+
+	/* VS1 tied to CD2, VS2 grounded */
+	[IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
+
+	/* VS1 float, VS2 grounded */
+	[IN_VS1] = (CARD_PCCARD | CARD_XV),
+
+	/* VS1 float, VS2 tied to CD2 */
+	[IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
+
+	/* VS1 float, VS2 tied to CD1 */
+	[IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
+
+	/* VS1 tied to CD2, VS2 float */
+	[IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
+
+	/* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
+	[IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
+};
+
+/*
+ * poll hardware to check card insertion status
+ */
+static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
+{
+	unsigned int stat;
+	u32 val;
+
+	stat = 0;
+
+	/* check CD for card presence */
+	val = pcmcia_readl(skt, PCMCIA_C1_REG);
+
+	if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
+		stat |= SS_DETECT;
+
+	/* if new insertion, detect cardtype */
+	if ((stat & SS_DETECT) && !skt->card_detected) {
+		unsigned int stat = 0;
+
+		/* float VS1, float VS2 */
+		val |= PCMCIA_C1_VS1OE_MASK;
+		val |= PCMCIA_C1_VS2OE_MASK;
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+		/* wait for output to stabilize and read VS[12] */
+		udelay(10);
+		val = pcmcia_readl(skt, PCMCIA_C1_REG);
+		stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
+		stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
+
+		/* drive VS1 low, float VS2 */
+		val &= ~PCMCIA_C1_VS1OE_MASK;
+		val |= PCMCIA_C1_VS2OE_MASK;
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+		/* wait for output to stabilize and read CD[12] */
+		udelay(10);
+		val = pcmcia_readl(skt, PCMCIA_C1_REG);
+		stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
+		stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
+
+		/* float VS1, drive VS2 low */
+		val |= PCMCIA_C1_VS1OE_MASK;
+		val &= ~PCMCIA_C1_VS2OE_MASK;
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+		/* wait for output to stabilize and read CD[12] */
+		udelay(10);
+		val = pcmcia_readl(skt, PCMCIA_C1_REG);
+		stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
+		stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
+
+		/* guess cardtype from all this */
+		skt->card_type = vscd_to_cardtype[stat];
+		if (!skt->card_type)
+			dev_err(&skt->socket.dev, "unsupported card type\n");
+
+		/* drive both VS pin to 0 again */
+		val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
+
+		/* enable correct logic */
+		val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
+		if (skt->card_type & CARD_PCCARD)
+			val |= PCMCIA_C1_EN_PCMCIA_MASK;
+		else
+			val |= PCMCIA_C1_EN_CARDBUS_MASK;
+
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+	}
+	skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
+
+	/* report card type/voltage */
+	if (skt->card_type & CARD_CARDBUS)
+		stat |= SS_CARDBUS;
+	if (skt->card_type & CARD_3V)
+		stat |= SS_3VCARD;
+	if (skt->card_type & CARD_XV)
+		stat |= SS_XVCARD;
+	stat |= SS_POWERON;
+
+	if (gpio_get_value(skt->pd->ready_gpio))
+		stat |= SS_READY;
+
+	return stat;
+}
+
+/*
+ * core request to get current socket status
+ */
+static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
+				     unsigned int *status)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+
+	skt = sock->driver_data;
+
+	spin_lock_bh(&skt->lock);
+	*status = __get_socket_status(skt);
+	spin_unlock_bh(&skt->lock);
+
+	return 0;
+}
+
+/*
+ * socket polling timer callback
+ */
+static void bcm63xx_pcmcia_poll(unsigned long data)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	unsigned int stat, events;
+
+	skt = (struct bcm63xx_pcmcia_socket *)data;
+
+	spin_lock_bh(&skt->lock);
+
+	stat = __get_socket_status(skt);
+
+	/* keep only changed bits, and mask with required one from the
+	 * core */
+	events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
+	skt->old_status = stat;
+	spin_unlock_bh(&skt->lock);
+
+	if (events)
+		pcmcia_parse_events(&skt->socket, events);
+
+	mod_timer(&skt->timer,
+		  jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+}
+
+static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
+				     struct pccard_io_map *map)
+{
+	/* this doesn't seem to be called by pcmcia layer if static
+	 * mapping is used */
+	return 0;
+}
+
+static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
+				      struct pccard_mem_map *map)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	struct resource *res;
+
+	skt = sock->driver_data;
+	if (map->flags & MAP_ATTRIB)
+		res = skt->attr_res;
+	else
+		res = skt->common_res;
+
+	map->static_start = res->start + map->card_start;
+	return 0;
+}
+
+static struct pccard_operations bcm63xx_pcmcia_operations = {
+	.init			= bcm63xx_pcmcia_sock_init,
+	.suspend		= bcm63xx_pcmcia_suspend,
+	.get_status		= bcm63xx_pcmcia_get_status,
+	.set_socket		= bcm63xx_pcmcia_set_socket,
+	.set_io_map		= bcm63xx_pcmcia_set_io_map,
+	.set_mem_map		= bcm63xx_pcmcia_set_mem_map,
+};
+
+/*
+ * register pcmcia socket to core
+ */
+static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	struct pcmcia_socket *sock;
+	struct resource *res, *irq_res;
+	unsigned int regmem_size = 0, iomem_size = 0;
+	u32 val;
+	int ret;
+
+	skt = kzalloc(sizeof(*skt), GFP_KERNEL);
+	if (!skt)
+		return -ENOMEM;
+	spin_lock_init(&skt->lock);
+	sock = &skt->socket;
+	sock->driver_data = skt;
+
+	/* make sure we have all resources we need */
+	skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	skt->pd = pdev->dev.platform_data;
+	if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* remap pcmcia registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regmem_size = resource_size(res);
+	if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
+		ret = -EINVAL;
+		goto err;
+	}
+	skt->reg_res = res;
+
+	skt->base = ioremap(res->start, regmem_size);
+	if (!skt->base) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/* remap io registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+	iomem_size = resource_size(res);
+	skt->io_base = ioremap(res->start, iomem_size);
+	if (!skt->io_base) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/* resources are static */
+	sock->resource_ops = &pccard_static_ops;
+	sock->ops = &bcm63xx_pcmcia_operations;
+	sock->owner = THIS_MODULE;
+	sock->dev.parent = &pdev->dev;
+	sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+	sock->io_offset = (unsigned long)skt->io_base;
+	sock->pci_irq = irq_res->start;
+
+#ifdef CONFIG_CARDBUS
+	sock->cb_dev = bcm63xx_cb_dev;
+	if (bcm63xx_cb_dev)
+		sock->features |= SS_CAP_CARDBUS;
+#endif
+
+	/* assume common & attribute memory have the same size */
+	sock->map_size = resource_size(skt->common_res);
+
+	/* initialize polling timer */
+	setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt);
+
+	/* initialize  pcmcia  control register,  drive  VS[12] to  0,
+	 * leave CB IDSEL to the old  value since it is set by the PCI
+	 * layer */
+	val = pcmcia_readl(skt, PCMCIA_C1_REG);
+	val &= PCMCIA_C1_CBIDSEL_MASK;
+	val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
+	pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+	/*
+	 * Hardware has only one set of timings registers, not one for
+	 * each memory access type, so we configure them for the
+	 * slowest one: attribute memory.
+	 */
+	val = PCMCIA_C2_DATA16_MASK;
+	val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
+	val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
+	val |= 3 << PCMCIA_C2_SETUP_SHIFT;
+	val |= 3 << PCMCIA_C2_HOLD_SHIFT;
+	pcmcia_writel(skt, val, PCMCIA_C2_REG);
+
+	ret = pcmcia_register_socket(sock);
+	if (ret)
+		goto err;
+
+	/* start polling socket */
+	mod_timer(&skt->timer,
+		  jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+
+	platform_set_drvdata(pdev, skt);
+	return 0;
+
+err:
+	if (skt->io_base)
+		iounmap(skt->io_base);
+	if (skt->base)
+		iounmap(skt->base);
+	if (skt->reg_res)
+		release_mem_region(skt->reg_res->start, regmem_size);
+	kfree(skt);
+	return ret;
+}
+
+static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	struct resource *res;
+
+	skt = platform_get_drvdata(pdev);
+	del_timer_sync(&skt->timer);
+	iounmap(skt->base);
+	iounmap(skt->io_base);
+	res = skt->reg_res;
+	release_mem_region(res->start, resource_size(res));
+	kfree(skt);
+	return 0;
+}
+
+struct platform_driver bcm63xx_pcmcia_driver = {
+	.probe	= bcm63xx_drv_pcmcia_probe,
+	.remove	= __devexit_p(bcm63xx_drv_pcmcia_remove),
+	.driver	= {
+		.name	= "bcm63xx_pcmcia",
+		.owner  = THIS_MODULE,
+	},
+};
+
+#ifdef CONFIG_CARDBUS
+static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
+				      const struct pci_device_id *id)
+{
+	/* keep pci device */
+	bcm63xx_cb_dev = dev;
+	return platform_driver_register(&bcm63xx_pcmcia_driver);
+}
+
+static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
+{
+	platform_driver_unregister(&bcm63xx_pcmcia_driver);
+	bcm63xx_cb_dev = NULL;
+}
+
+static struct pci_device_id bcm63xx_cb_table[] = {
+	{
+		.vendor		= PCI_VENDOR_ID_BROADCOM,
+		.device		= BCM6348_CPU_ID,
+		.subvendor	= PCI_VENDOR_ID_BROADCOM,
+		.subdevice	= PCI_ANY_ID,
+		.class		= PCI_CLASS_BRIDGE_CARDBUS << 8,
+		.class_mask	= ~0,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_BROADCOM,
+		.device		= BCM6358_CPU_ID,
+		.subvendor	= PCI_VENDOR_ID_BROADCOM,
+		.subdevice	= PCI_ANY_ID,
+		.class		= PCI_CLASS_BRIDGE_CARDBUS << 8,
+		.class_mask	= ~0,
+	},
+
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
+
+static struct pci_driver bcm63xx_cardbus_driver = {
+	.name		= "bcm63xx_cardbus",
+	.id_table	= bcm63xx_cb_table,
+	.probe		= bcm63xx_cb_probe,
+	.remove		= __devexit_p(bcm63xx_cb_exit),
+};
+#endif
+
+/*
+ * if cardbus support is enabled, register our platform device after
+ * our fake cardbus bridge has been registered
+ */
+static int __init bcm63xx_pcmcia_init(void)
+{
+#ifdef CONFIG_CARDBUS
+	return pci_register_driver(&bcm63xx_cardbus_driver);
+#else
+	return platform_driver_register(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+static void __exit bcm63xx_pcmcia_exit(void)
+{
+#ifdef CONFIG_CARDBUS
+	return pci_unregister_driver(&bcm63xx_cardbus_driver);
+#else
+	platform_driver_unregister(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+module_init(bcm63xx_pcmcia_init);
+module_exit(bcm63xx_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.h b/drivers/pcmcia/bcm63xx_pcmcia.h
new file mode 100644
index 000000000000..ed957399d863
--- /dev/null
+++ b/drivers/pcmcia/bcm63xx_pcmcia.h
@@ -0,0 +1,60 @@
+#ifndef BCM63XX_PCMCIA_H_
+#define BCM63XX_PCMCIA_H_
+
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <pcmcia/ss.h>
+#include <bcm63xx_dev_pcmcia.h>
+
+/* socket polling rate in ms */
+#define BCM63XX_PCMCIA_POLL_RATE	500
+
+enum {
+	CARD_CARDBUS = (1 << 0),
+	CARD_PCCARD = (1 << 1),
+	CARD_5V = (1 << 2),
+	CARD_3V = (1 << 3),
+	CARD_XV = (1 << 4),
+	CARD_YV = (1 << 5),
+};
+
+struct bcm63xx_pcmcia_socket {
+	struct pcmcia_socket socket;
+
+	/* platform specific data */
+	struct bcm63xx_pcmcia_platform_data *pd;
+
+	/* all regs access are protected by this spinlock */
+	spinlock_t lock;
+
+	/* pcmcia registers resource */
+	struct resource *reg_res;
+
+	/* base remapped address of registers */
+	void __iomem *base;
+
+	/* whether a card is detected at the moment */
+	int card_detected;
+
+	/* type of detected card (mask of above enum) */
+	u8 card_type;
+
+	/* keep last socket status to implement event reporting */
+	unsigned int old_status;
+
+	/* backup of requested socket state */
+	socket_state_t requested_state;
+
+	/* timer used for socket status polling */
+	struct timer_list timer;
+
+	/* attribute/common memory resources */
+	struct resource *attr_res;
+	struct resource *common_res;
+	struct resource *io_res;
+
+	/* base address of io memory */
+	void __iomem *io_base;
+};
+
+#endif /* BCM63XX_PCMCIA_H_ */
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index b59d4115d20f..300b368605c9 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -302,7 +302,7 @@ static int __devexit bfin_cf_remove(struct platform_device *pdev)
 
 static int bfin_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+	return pcmcia_socket_dev_suspend(&pdev->dev);
 }
 
 static int bfin_cf_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 4a110b7b2673..6c4a4fc83630 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -1463,7 +1463,9 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t
 	    return -ENOMEM;
     }
     tuple.DesiredTuple = code;
-    tuple.Attributes = TUPLE_RETURN_COMMON;
+    tuple.Attributes = 0;
+    if (function == BIND_FN_ALL)
+	    tuple.Attributes = TUPLE_RETURN_COMMON;
     ret = pccard_get_first_tuple(s, function, &tuple);
     if (ret != 0)
 	    goto done;
@@ -1490,7 +1492,7 @@ EXPORT_SYMBOL(pccard_read_tuple);
     
 ======================================================================*/
 
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *info)
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *info)
 {
     tuple_t *tuple;
     cisparse_t *p;
@@ -1515,30 +1517,30 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned
     count = reserved = 0;
     tuple->DesiredTuple = RETURN_FIRST_TUPLE;
     tuple->Attributes = TUPLE_RETURN_COMMON;
-    ret = pccard_get_first_tuple(s, function, tuple);
+    ret = pccard_get_first_tuple(s, BIND_FN_ALL, tuple);
     if (ret != 0)
 	goto done;
 
     /* First tuple should be DEVICE; we should really have either that
        or a CFTABLE_ENTRY of some sort */
     if ((tuple->TupleCode == CISTPL_DEVICE) ||
-	(pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == 0) ||
-	(pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
+	(pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY, p) == 0) ||
+	(pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
 	dev_ok++;
 
     /* All cards should have a MANFID tuple, and/or a VERS_1 or VERS_2
        tuple, for card identification.  Certain old D-Link and Linksys
        cards have only a broken VERS_2 tuple; hence the bogus test. */
-    if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) ||
-	(pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) ||
-	(pccard_read_tuple(s, function, CISTPL_VERS_2, p) != -ENOSPC))
+    if ((pccard_read_tuple(s, BIND_FN_ALL, CISTPL_MANFID, p) == 0) ||
+	(pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_1, p) == 0) ||
+	(pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_2, p) != -ENOSPC))
 	ident_ok++;
 
     if (!dev_ok && !ident_ok)
 	goto done;
 
     for (count = 1; count < MAX_TUPLES; count++) {
-	ret = pccard_get_next_tuple(s, function, tuple);
+	ret = pccard_get_next_tuple(s, BIND_FN_ALL, tuple);
 	if (ret != 0)
 		break;
 	if (((tuple->TupleCode > 0x23) && (tuple->TupleCode < 0x40)) ||
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 0660ad182589..934d4bee39a0 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -101,7 +101,7 @@ EXPORT_SYMBOL(pcmcia_socket_list_rwsem);
 static int socket_resume(struct pcmcia_socket *skt);
 static int socket_suspend(struct pcmcia_socket *skt);
 
-int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state)
+int pcmcia_socket_dev_suspend(struct device *dev)
 {
 	struct pcmcia_socket *socket;
 
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 79615e6d540b..1f4098f1354d 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -197,8 +197,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function,
 		      cisdata_t code, void *parse);
 int pcmcia_replace_cis(struct pcmcia_socket *s,
 		       const u8 *data, const size_t len);
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function,
-			unsigned int *count);
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *count);
 
 /* rsrc_mgr.c */
 int pcmcia_validate_mem(struct pcmcia_socket *s);
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 9f300d3cb125..f5b7079f13d3 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -547,7 +547,7 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev)
 	if (!vers1)
 		return -ENOMEM;
 
-	if (!pccard_read_tuple(p_dev->socket, p_dev->func,
+	if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL,
 			       CISTPL_MANFID, &manf_id)) {
 		p_dev->manf_id = manf_id.manf;
 		p_dev->card_id = manf_id.card;
@@ -581,9 +581,9 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev)
 		kfree(devgeo);
 	}
 
-	if (!pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_VERS_1,
+	if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_VERS_1,
 			       vers1)) {
-		for (i=0; i < vers1->ns; i++) {
+		for (i = 0; i < min_t(unsigned int, 4, vers1->ns); i++) {
 			char *tmp;
 			unsigned int length;
 
@@ -733,7 +733,7 @@ static int pcmcia_card_add(struct pcmcia_socket *s)
 		return -EAGAIN; /* try again, but later... */
 	}
 
-	ret = pccard_validate_cis(s, BIND_FN_ALL, &no_chains);
+	ret = pccard_validate_cis(s, &no_chains);
 	if (ret || !no_chains) {
 		ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n");
 		return -ENODEV;
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index 46561face128..a04f21c8170f 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -42,7 +42,7 @@ MODULE_DEVICE_TABLE(pci, i82092aa_pci_ids);
 #ifdef CONFIG_PM
 static int i82092aa_socket_suspend (struct pci_dev *dev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int i82092aa_socket_resume (struct pci_dev *dev)
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 40d4953e4b12..a4aacb830b80 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -1053,8 +1053,8 @@ static int i365_set_io_map(u_short sock, struct pccard_io_map *io)
     u_char map, ioctl;
     
     debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
-	  "%#x-%#x)\n", sock, io->map, io->flags,
-	  io->speed, io->start, io->stop);
+	  "%#llx-%#llx)\n", sock, io->map, io->flags, io->speed,
+	  (unsigned long long)io->start, (unsigned long long)io->stop);
     map = io->map;
     if ((map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
 	(io->stop < io->start)) return -EINVAL;
@@ -1241,7 +1241,7 @@ static int pcic_init(struct pcmcia_socket *s)
 static int i82365_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int i82365_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 62b4ecc97c46..7dfbee1dcd76 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -537,8 +537,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io)
 	u_char map;
 
 	debug(3, "m32r_cfc: SetIOMap(%d, %d, %#2.2x, %d ns, "
-		  "%#lx-%#lx)\n", sock, io->map, io->flags,
-		  io->speed, io->start, io->stop);
+		  "%#llx-%#llx)\n", sock, io->map, io->flags,
+		  io->speed, (unsigned long long)io->start,
+		  (unsigned long long)io->stop);
 	map = io->map;
 
 	return 0;
@@ -554,8 +555,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem)
 	pcc_socket_t *t = &socket[sock];
 
 	debug(3, "m32r_cfc: SetMemMap(%d, %d, %#2.2x, %d ns, "
-		 "%#lx, %#x)\n", sock, map, mem->flags,
-		 mem->speed, mem->static_start, mem->card_start);
+		 "%#llx, %#x)\n", sock, map, mem->flags,
+		 mem->speed, (unsigned long long)mem->static_start,
+		 mem->card_start);
 
 	/*
 	 * sanity check
@@ -699,7 +701,7 @@ static struct pccard_operations pcc_operations = {
 static int cfc_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int cfc_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 12034b41d196..c6524f99ccc3 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -492,8 +492,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io)
 	u_char map;
 
 	debug(3, "m32r-pcc: SetIOMap(%d, %d, %#2.2x, %d ns, "
-		  "%#x-%#x)\n", sock, io->map, io->flags,
-		  io->speed, io->start, io->stop);
+		  "%#llx-%#llx)\n", sock, io->map, io->flags,
+		  io->speed, (unsigned long long)io->start,
+		  (unsigned long long)io->stop);
 	map = io->map;
 
 	return 0;
@@ -515,8 +516,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem)
 #endif
 
 	debug(3, "m32r-pcc: SetMemMap(%d, %d, %#2.2x, %d ns, "
-		 "%#lx,  %#x)\n", sock, map, mem->flags,
-		 mem->speed, mem->static_start, mem->card_start);
+		 "%#llx,  %#x)\n", sock, map, mem->flags,
+		 mem->speed, (unsigned long long)mem->static_start,
+		 mem->card_start);
 
 	/*
 	 * sanity check
@@ -675,7 +677,7 @@ static struct pccard_operations pcc_operations = {
 static int pcc_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int pcc_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index d1ad0966392d..403559ba49dd 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -975,8 +975,9 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
 #define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
 
 	dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, "
-		"%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
-		io->speed, io->start, io->stop);
+		"%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags,
+		io->speed, (unsigned long long)io->start,
+		(unsigned long long)io->stop);
 
 	if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
 	    || (io->stop > 0xffff) || (io->stop < io->start))
@@ -1055,8 +1056,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock,
 	pcmconf8xx_t *pcmcia = s->pcmcia;
 
 	dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
-		"%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
-		mem->speed, mem->static_start, mem->card_start);
+		"%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
+		mem->speed, (unsigned long long)mem->static_start,
+		mem->card_start);
 
 	if ((mem->map >= PCMCIA_MEM_WIN_NO)
 //          || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
@@ -1107,8 +1109,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock,
 	}
 
 	dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
-		"%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
-		mem->speed, mem->static_start, mem->card_start);
+		"%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
+		mem->speed, (unsigned long long)mem->static_start,
+		mem->card_start);
 
 	/* copy the struct and modify the copy */
 
@@ -1296,7 +1299,7 @@ static int m8xx_remove(struct of_device *ofdev)
 #ifdef CONFIG_PM
 static int m8xx_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&pdev->dev, state);
+	return pcmcia_socket_dev_suspend(&pdev->dev);
 }
 
 static int m8xx_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index f3736398900e..68570bc3ac86 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -334,7 +334,7 @@ static int __exit omap_cf_remove(struct platform_device *pdev)
 
 static int omap_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+	return pcmcia_socket_dev_suspend(&pdev->dev);
 }
 
 static int omap_cf_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 32c44040c1e8..30cf71d2ee23 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -881,7 +881,7 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	mutex_lock(&s->skt_mutex);
 	pcmcia_validate_mem(s);
 	mutex_unlock(&s->skt_mutex);
-	ret = pccard_validate_cis(s, BIND_FN_ALL, &buf->cisinfo.Chains);
+	ret = pccard_validate_cis(s, &buf->cisinfo.Chains);
 	break;
     case DS_SUSPEND_CARD:
 	ret = pcmcia_suspend_card(s);
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 8bed1dab9039..70a33468bcd0 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -641,6 +641,12 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev,
 	if ((ret = pci_enable_device(dev)))
 		goto err_out_free_mem;
 
+	if (!pci_resource_start(dev, 0)) {
+		printk(KERN_INFO "pd6729: refusing to load the driver "
+				 "as the io_base is 0.\n");
+		goto err_out_free_mem;
+	}
+
 	printk(KERN_INFO "pd6729: Cirrus PD6729 PCI to PCMCIA Bridge "
 		"at 0x%llx on irq %d\n",
 		(unsigned long long)pci_resource_start(dev, 0), dev->irq);
@@ -758,7 +764,7 @@ static void __devexit pd6729_pci_remove(struct pci_dev *dev)
 #ifdef CONFIG_PM
 static int pd6729_socket_suspend(struct pci_dev *dev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int pd6729_socket_resume(struct pci_dev *dev)
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 87e22ef8eb02..0e35acb1366b 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -302,7 +302,7 @@ static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)
 
 static int pxa2xx_drv_pcmcia_suspend(struct device *dev)
 {
-	return pcmcia_socket_dev_suspend(dev, PMSG_SUSPEND);
+	return pcmcia_socket_dev_suspend(dev);
 }
 
 static int pxa2xx_drv_pcmcia_resume(struct device *dev)
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 9ca22c7aafb2..7039f3cf5b77 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -206,6 +206,7 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
     /* First, what does a floating port look like? */
     b = kzalloc(256, GFP_KERNEL);
     if (!b) {
+	    printk("\n");
 	    dev_printk(KERN_ERR, &s->dev,
 		   "do_io_probe: unable to kmalloc 256 bytes");
             return;
@@ -275,7 +276,7 @@ static int readable(struct pcmcia_socket *s, struct resource *res,
 	s->cis_mem.res = res;
 	s->cis_virt = ioremap(res->start, s->map_size);
 	if (s->cis_virt) {
-		ret = pccard_validate_cis(s, BIND_FN_ALL, count);
+		ret = pccard_validate_cis(s, count);
 		/* invalidate mapping and CIS cache */
 		iounmap(s->cis_virt);
 		s->cis_virt = NULL;
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index f424146a2bc9..ac8aa09ba0da 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -130,7 +130,7 @@ static struct pcmcia_low_level assabet_pcmcia_ops = {
 	.socket_suspend		= assabet_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_assabet_init(struct device *dev)
+int pcmcia_assabet_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index d8da5ac844e9..2d0e99751530 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -89,7 +89,7 @@ static int sa11x0_drv_pcmcia_remove(struct platform_device *dev)
 static int sa11x0_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int sa11x0_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index 4c41e86ccff9..0c76d337815b 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -123,7 +123,7 @@ static struct pcmcia_low_level neponset_pcmcia_ops = {
 	.socket_suspend 	= sa1111_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_neponset_init(struct sa1111_dev *sadev)
+int pcmcia_neponset_init(struct sa1111_dev *sadev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 401052a21ce8..4be4e172ffa1 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -159,7 +159,7 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev)
 
 static int pcmcia_suspend(struct sa1111_dev *dev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int pcmcia_resume(struct sa1111_dev *dev)
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 163cf98e2386..ef7e9e58782b 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -336,8 +336,9 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
 	struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
 	unsigned short speed = map->speed;
 
-	debug(skt, 2, "map %u  speed %u start 0x%08x stop 0x%08x\n",
-		map->map, map->speed, map->start, map->stop);
+	debug(skt, 2, "map %u  speed %u start 0x%08llx stop 0x%08llx\n",
+		map->map, map->speed, (unsigned long long)map->start,
+		(unsigned long long)map->stop);
 	debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
 		(map->flags==0)?"<NONE>":"",
 		(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index ff9a3bb3c88d..78d5aab542f7 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -300,7 +300,7 @@ static ssize_t pccard_show_cis(struct kobject *kobj,
 
 		if (!(s->state & SOCKET_PRESENT))
 			return -ENODEV;
-		if (pccard_validate_cis(s, BIND_FN_ALL, &chains))
+		if (pccard_validate_cis(s, &chains))
 			return -EIO;
 		if (!chains)
 			return -ENODATA;
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 8eb04230fec7..6918849d511e 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -366,7 +366,7 @@ static int __init get_tcic_id(void)
 static int tcic_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int tcic_drv_pcmcia_resume(struct platform_device *dev)
@@ -732,8 +732,8 @@ static int tcic_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
     u_short base, len, ioctl;
     
     debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
-	  "%#x-%#x)\n", psock, io->map, io->flags,
-	  io->speed, io->start, io->stop);
+	  "%#llx-%#llx)\n", psock, io->map, io->flags, io->speed,
+	  (unsigned long long)io->start, (unsigned long long)io->stop);
     if ((io->map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
 	(io->stop < io->start)) return -EINVAL;
     tcic_setw(TCIC_ADDR+2, TCIC_ADR2_INDREG | (psock << TCIC_SS_SHFT));
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index d4ad50d737b0..c9fcbdc164ea 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -707,7 +707,7 @@ __setup("vrc4171_card=", vrc4171_card_setup);
 static int vrc4171_card_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int vrc4171_card_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index b459e87a30ac..abe0e44c6e9e 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1225,60 +1225,71 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
 }
 
 #ifdef CONFIG_PM
-static int yenta_dev_suspend (struct pci_dev *dev, pm_message_t state)
+static int yenta_dev_suspend_noirq(struct device *dev)
 {
-	struct yenta_socket *socket = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct yenta_socket *socket = pci_get_drvdata(pdev);
 	int ret;
 
-	ret = pcmcia_socket_dev_suspend(&dev->dev, state);
+	ret = pcmcia_socket_dev_suspend(dev);
 
-	if (socket) {
-		if (socket->type && socket->type->save_state)
-			socket->type->save_state(socket);
+	if (!socket)
+		return ret;
 
-		/* FIXME: pci_save_state needs to have a better interface */
-		pci_save_state(dev);
-		pci_read_config_dword(dev, 16*4, &socket->saved_state[0]);
-		pci_read_config_dword(dev, 17*4, &socket->saved_state[1]);
-		pci_disable_device(dev);
+	if (socket->type && socket->type->save_state)
+		socket->type->save_state(socket);
 
-		/*
-		 * Some laptops (IBM T22) do not like us putting the Cardbus
-		 * bridge into D3.  At a guess, some other laptop will
-		 * probably require this, so leave it commented out for now.
-		 */
-		/* pci_set_power_state(dev, 3); */
-	}
+	pci_save_state(pdev);
+	pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]);
+	pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]);
+	pci_disable_device(pdev);
+
+	/*
+	 * Some laptops (IBM T22) do not like us putting the Cardbus
+	 * bridge into D3.  At a guess, some other laptop will
+	 * probably require this, so leave it commented out for now.
+	 */
+	/* pci_set_power_state(dev, 3); */
 
 	return ret;
 }
 
-
-static int yenta_dev_resume (struct pci_dev *dev)
+static int yenta_dev_resume_noirq(struct device *dev)
 {
-	struct yenta_socket *socket = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct yenta_socket *socket = pci_get_drvdata(pdev);
+	int ret;
 
-	if (socket) {
-		int rc;
+	if (!socket)
+		return 0;
 
-		pci_set_power_state(dev, 0);
-		/* FIXME: pci_restore_state needs to have a better interface */
-		pci_restore_state(dev);
-		pci_write_config_dword(dev, 16*4, socket->saved_state[0]);
-		pci_write_config_dword(dev, 17*4, socket->saved_state[1]);
+	pci_write_config_dword(pdev, 16*4, socket->saved_state[0]);
+	pci_write_config_dword(pdev, 17*4, socket->saved_state[1]);
 
-		rc = pci_enable_device(dev);
-		if (rc)
-			return rc;
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
 
-		pci_set_master(dev);
+	pci_set_master(pdev);
 
-		if (socket->type && socket->type->restore_state)
-			socket->type->restore_state(socket);
-	}
+	if (socket->type && socket->type->restore_state)
+		socket->type->restore_state(socket);
 
-	return pcmcia_socket_dev_resume(&dev->dev);
+	return pcmcia_socket_dev_resume(dev);
 }
+
+static struct dev_pm_ops yenta_pm_ops = {
+	.suspend_noirq = yenta_dev_suspend_noirq,
+	.resume_noirq = yenta_dev_resume_noirq,
+	.freeze_noirq = yenta_dev_suspend_noirq,
+	.thaw_noirq = yenta_dev_resume_noirq,
+	.poweroff_noirq = yenta_dev_suspend_noirq,
+	.restore_noirq = yenta_dev_resume_noirq,
+};
+
+#define YENTA_PM_OPS	(&yenta_pm_ops)
+#else
+#define YENTA_PM_OPS	NULL
 #endif
 
 #define CB_ID(vend,dev,type)				\
@@ -1376,10 +1387,7 @@ static struct pci_driver yenta_cardbus_driver = {
 	.id_table	= yenta_table,
 	.probe		= yenta_probe,
 	.remove		= __devexit_p(yenta_close),
-#ifdef CONFIG_PM
-	.suspend	= yenta_dev_suspend,
-	.resume		= yenta_dev_resume,
-#endif
+	.driver.pm	= YENTA_PM_OPS,
 };
 
 
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 749e2102b2be..d379e74a05d0 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -150,6 +150,8 @@ struct eeepc_hotk {
 /* The actual device the driver binds to */
 static struct eeepc_hotk *ehotk;
 
+static void eeepc_rfkill_hotplug(bool real);
+
 /* Platform device/driver */
 static int eeepc_hotk_thaw(struct device *device);
 static int eeepc_hotk_restore(struct device *device);
@@ -343,14 +345,23 @@ static bool eeepc_wlan_rfkill_blocked(void)
 static int eeepc_rfkill_set(void *data, bool blocked)
 {
 	unsigned long asl = (unsigned long)data;
-	return set_acpi(asl, !blocked);
+	int ret;
+
+	if (asl != CM_ASL_WLAN)
+		return set_acpi(asl, !blocked);
+
+	/* hack to avoid panic with rt2860sta */
+	if (blocked)
+		eeepc_rfkill_hotplug(false);
+	ret = set_acpi(asl, !blocked);
+	return ret;
 }
 
 static const struct rfkill_ops eeepc_rfkill_ops = {
 	.set_block = eeepc_rfkill_set,
 };
 
-static void __init eeepc_enable_camera(void)
+static void __devinit eeepc_enable_camera(void)
 {
 	/*
 	 * If the following call to set_acpi() fails, it's because there's no
@@ -643,13 +654,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
 	return 0;
 }
 
-static void eeepc_rfkill_hotplug(void)
+static void eeepc_rfkill_hotplug(bool real)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus;
-	bool blocked = eeepc_wlan_rfkill_blocked();
+	bool blocked = real ? eeepc_wlan_rfkill_blocked() : true;
 
-	if (ehotk->wlan_rfkill)
+	if (real && ehotk->wlan_rfkill)
 		rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
 
 	mutex_lock(&ehotk->hotplug_lock);
@@ -692,7 +703,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 	if (event != ACPI_NOTIFY_BUS_CHECK)
 		return;
 
-	eeepc_rfkill_hotplug();
+	eeepc_rfkill_hotplug(true);
 }
 
 static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
@@ -850,7 +861,7 @@ static int eeepc_hotk_restore(struct device *device)
 {
 	/* Refresh both wlan rfkill state and pci hotplug */
 	if (ehotk->wlan_rfkill)
-		eeepc_rfkill_hotplug();
+		eeepc_rfkill_hotplug(true);
 
 	if (ehotk->bluetooth_rfkill)
 		rfkill_set_sw_state(ehotk->bluetooth_rfkill,
@@ -993,7 +1004,7 @@ static void eeepc_rfkill_exit(void)
 	 * Refresh pci hotplug in case the rfkill state was changed after
 	 * eeepc_unregister_rfkill_notifier()
 	 */
-	eeepc_rfkill_hotplug();
+	eeepc_rfkill_hotplug(true);
 	if (ehotk->hotplug_slot)
 		pci_hp_deregister(ehotk->hotplug_slot);
 
@@ -1109,7 +1120,7 @@ static int eeepc_rfkill_init(struct device *dev)
 	 * Refresh pci hotplug in case the rfkill state was changed during
 	 * setup.
 	 */
-	eeepc_rfkill_hotplug();
+	eeepc_rfkill_hotplug(true);
 
 exit:
 	if (result && result != -ENODEV)
@@ -1189,7 +1200,7 @@ static int eeepc_input_init(struct device *dev)
 	return 0;
 }
 
-static int eeepc_hotk_add(struct acpi_device *device)
+static int __devinit eeepc_hotk_add(struct acpi_device *device)
 {
 	struct device *dev;
 	int result;
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index f35aee5c2149..bcd4ba8be7db 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -944,7 +944,7 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
 	struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device);
 	struct input_dev *input = fujitsu_hotkey->input;
 
-#ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
 	if (fujitsu_hotkey->logolamp_registered)
 		led_classdev_unregister(&logolamp_led);
 
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index f9f68e0e7344..a2a742c8ff7e 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1041,6 +1041,9 @@ static int sony_nc_resume(struct acpi_device *device)
 			sony_backlight_update_status(sony_backlight_device) < 0)
 		printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n");
 
+	/* re-read rfkill state */
+	sony_nc_rfkill_update();
+
 	return 0;
 }
 
@@ -1078,6 +1081,8 @@ static int sony_nc_setup_rfkill(struct acpi_device *device,
 	struct rfkill *rfk;
 	enum rfkill_type type;
 	const char *name;
+	int result;
+	bool hwblock;
 
 	switch (nc_type) {
 	case SONY_WIFI:
@@ -1105,6 +1110,10 @@ static int sony_nc_setup_rfkill(struct acpi_device *device,
 	if (!rfk)
 		return -ENOMEM;
 
+	sony_call_snc_handle(0x124, 0x200, &result);
+	hwblock = !(result & 0x1);
+	rfkill_set_hw_state(rfk, hwblock);
+
 	err = rfkill_register(rfk);
 	if (err) {
 		rfkill_destroy(rfk);
@@ -1202,15 +1211,6 @@ static int sony_nc_add(struct acpi_device *device)
 		}
 	}
 
-	/* try to _INI the device if such method exists (ACPI spec 3.0-6.5.1
-	 * should be respected as we already checked for the device presence above */
-	if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, METHOD_NAME__INI, &handle))) {
-		dprintk("Invoking _INI\n");
-		if (ACPI_FAILURE(acpi_evaluate_object(sony_nc_acpi_handle, METHOD_NAME__INI,
-						NULL, NULL)))
-			dprintk("_INI Method failed\n");
-	}
-
 	if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "ECON",
 					 &handle))) {
 		if (acpi_callsetfunc(sony_nc_acpi_handle, "ECON", 1, NULL))
@@ -1390,27 +1390,20 @@ struct sonypi_eventtypes {
 	struct sonypi_event	*events;
 };
 
-struct device_ctrl {
+struct sony_pic_dev {
+	struct acpi_device		*acpi_dev;
+	struct sony_pic_irq		*cur_irq;
+	struct sony_pic_ioport		*cur_ioport;
+	struct list_head		interrupts;
+	struct list_head		ioports;
+	struct mutex			lock;
+	struct sonypi_eventtypes	*event_types;
+	int                             (*handle_irq)(const u8, const u8);
 	int				model;
-	int				(*handle_irq)(const u8, const u8);
 	u16				evport_offset;
-	u8				has_camera;
-	u8				has_bluetooth;
-	u8				has_wwan;
-	struct sonypi_eventtypes	*event_types;
-};
-
-struct sony_pic_dev {
-	struct device_ctrl	*control;
-	struct acpi_device	*acpi_dev;
-	struct sony_pic_irq	*cur_irq;
-	struct sony_pic_ioport	*cur_ioport;
-	struct list_head	interrupts;
-	struct list_head	ioports;
-	struct mutex		lock;
-	u8			camera_power;
-	u8			bluetooth_power;
-	u8			wwan_power;
+	u8				camera_power;
+	u8				bluetooth_power;
+	u8				wwan_power;
 };
 
 static struct sony_pic_dev spic_dev = {
@@ -1418,6 +1411,8 @@ static struct sony_pic_dev spic_dev = {
 	.ioports	= LIST_HEAD_INIT(spic_dev.ioports),
 };
 
+static int spic_drv_registered;
+
 /* Event masks */
 #define SONYPI_JOGGER_MASK			0x00000001
 #define SONYPI_CAPTURE_MASK			0x00000002
@@ -1715,27 +1710,6 @@ static int type3_handle_irq(const u8 data_mask, const u8 ev)
 	return 1;
 }
 
-static struct device_ctrl spic_types[] = {
-	{
-		.model = SONYPI_DEVICE_TYPE1,
-		.handle_irq = NULL,
-		.evport_offset = SONYPI_TYPE1_OFFSET,
-		.event_types = type1_events,
-	},
-	{
-		.model = SONYPI_DEVICE_TYPE2,
-		.handle_irq = NULL,
-		.evport_offset = SONYPI_TYPE2_OFFSET,
-		.event_types = type2_events,
-	},
-	{
-		.model = SONYPI_DEVICE_TYPE3,
-		.handle_irq = type3_handle_irq,
-		.evport_offset = SONYPI_TYPE3_OFFSET,
-		.event_types = type3_events,
-	},
-};
-
 static void sony_pic_detect_device_type(struct sony_pic_dev *dev)
 {
 	struct pci_dev *pcidev;
@@ -1743,48 +1717,63 @@ static void sony_pic_detect_device_type(struct sony_pic_dev *dev)
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[0];
+		dev->model = SONYPI_DEVICE_TYPE1;
+		dev->evport_offset = SONYPI_TYPE1_OFFSET;
+		dev->event_types = type1_events;
 		goto out;
 	}
 
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_ICH6_1, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[2];
+		dev->model = SONYPI_DEVICE_TYPE2;
+		dev->evport_offset = SONYPI_TYPE2_OFFSET;
+		dev->event_types = type2_events;
 		goto out;
 	}
 
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_ICH7_1, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[2];
+		dev->model = SONYPI_DEVICE_TYPE3;
+		dev->handle_irq = type3_handle_irq;
+		dev->evport_offset = SONYPI_TYPE3_OFFSET;
+		dev->event_types = type3_events;
 		goto out;
 	}
 
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_ICH8_4, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[2];
+		dev->model = SONYPI_DEVICE_TYPE3;
+		dev->handle_irq = type3_handle_irq;
+		dev->evport_offset = SONYPI_TYPE3_OFFSET;
+		dev->event_types = type3_events;
 		goto out;
 	}
 
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_ICH9_1, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[2];
+		dev->model = SONYPI_DEVICE_TYPE3;
+		dev->handle_irq = type3_handle_irq;
+		dev->evport_offset = SONYPI_TYPE3_OFFSET;
+		dev->event_types = type3_events;
 		goto out;
 	}
 
 	/* default */
-	dev->control = &spic_types[1];
+	dev->model = SONYPI_DEVICE_TYPE2;
+	dev->evport_offset = SONYPI_TYPE2_OFFSET;
+	dev->event_types = type2_events;
 
 out:
 	if (pcidev)
 		pci_dev_put(pcidev);
 
 	printk(KERN_INFO DRV_PFX "detected Type%d model\n",
-			dev->control->model == SONYPI_DEVICE_TYPE1 ? 1 :
-			dev->control->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
+			dev->model == SONYPI_DEVICE_TYPE1 ? 1 :
+			dev->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
 }
 
 /* camera tests and poweron/poweroff */
@@ -2557,7 +2546,7 @@ static int sony_pic_enable(struct acpi_device *device,
 	buffer.pointer = resource;
 
 	/* setup Type 1 resources */
-	if (spic_dev.control->model == SONYPI_DEVICE_TYPE1) {
+	if (spic_dev.model == SONYPI_DEVICE_TYPE1) {
 
 		/* setup io resources */
 		resource->res1.type = ACPI_RESOURCE_TYPE_IO;
@@ -2640,29 +2629,28 @@ static irqreturn_t sony_pic_irq(int irq, void *dev_id)
 		data_mask = inb_p(dev->cur_ioport->io2.minimum);
 	else
 		data_mask = inb_p(dev->cur_ioport->io1.minimum +
-				dev->control->evport_offset);
+				dev->evport_offset);
 
 	dprintk("event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n",
 			ev, data_mask, dev->cur_ioport->io1.minimum,
-			dev->control->evport_offset);
+			dev->evport_offset);
 
 	if (ev == 0x00 || ev == 0xff)
 		return IRQ_HANDLED;
 
-	for (i = 0; dev->control->event_types[i].mask; i++) {
+	for (i = 0; dev->event_types[i].mask; i++) {
 
-		if ((data_mask & dev->control->event_types[i].data) !=
-		    dev->control->event_types[i].data)
+		if ((data_mask & dev->event_types[i].data) !=
+		    dev->event_types[i].data)
 			continue;
 
-		if (!(mask & dev->control->event_types[i].mask))
+		if (!(mask & dev->event_types[i].mask))
 			continue;
 
-		for (j = 0; dev->control->event_types[i].events[j].event; j++) {
-			if (ev == dev->control->event_types[i].events[j].data) {
+		for (j = 0; dev->event_types[i].events[j].event; j++) {
+			if (ev == dev->event_types[i].events[j].data) {
 				device_event =
-					dev->control->
-						event_types[i].events[j].event;
+					dev->event_types[i].events[j].event;
 				goto found;
 			}
 		}
@@ -2670,13 +2658,12 @@ static irqreturn_t sony_pic_irq(int irq, void *dev_id)
 	/* Still not able to decode the event try to pass
 	 * it over to the minidriver
 	 */
-	if (dev->control->handle_irq &&
-			dev->control->handle_irq(data_mask, ev) == 0)
+	if (dev->handle_irq && dev->handle_irq(data_mask, ev) == 0)
 		return IRQ_HANDLED;
 
 	dprintk("unknown event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n",
 			ev, data_mask, dev->cur_ioport->io1.minimum,
-			dev->control->evport_offset);
+			dev->evport_offset);
 	return IRQ_HANDLED;
 
 found:
@@ -2807,7 +2794,7 @@ static int sony_pic_add(struct acpi_device *device)
 	/* request IRQ */
 	list_for_each_entry_reverse(irq, &spic_dev.interrupts, list) {
 		if (!request_irq(irq->irq.interrupts[0], sony_pic_irq,
-					IRQF_SHARED, "sony-laptop", &spic_dev)) {
+					IRQF_DISABLED, "sony-laptop", &spic_dev)) {
 			dprintk("IRQ: %d - triggering: %d - "
 					"polarity: %d - shr: %d\n",
 					irq->irq.interrupts[0],
@@ -2940,6 +2927,7 @@ static int __init sony_laptop_init(void)
 					"Unable to register SPIC driver.");
 			goto out;
 		}
+		spic_drv_registered = 1;
 	}
 
 	result = acpi_bus_register_driver(&sony_nc_driver);
@@ -2951,7 +2939,7 @@ static int __init sony_laptop_init(void)
 	return 0;
 
 out_unregister_pic:
-	if (!no_spic)
+	if (spic_drv_registered)
 		acpi_bus_unregister_driver(&sony_pic_driver);
 out:
 	return result;
@@ -2960,7 +2948,7 @@ out:
 static void __exit sony_laptop_exit(void)
 {
 	acpi_bus_unregister_driver(&sony_nc_driver);
-	if (!no_spic)
+	if (spic_drv_registered)
 		acpi_bus_unregister_driver(&sony_pic_driver);
 }
 
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 4cdb31a362ca..a0c816238aa9 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -12,6 +12,7 @@
 */
 
 #include <linux/rtc.h>
+#include <linux/sched.h>
 #include <linux/log2.h>
 
 int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 8a11de9552cd..62227cd52410 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -13,6 +13,7 @@
 
 #include <linux/module.h>
 #include <linux/rtc.h>
+#include <linux/sched.h>
 #include "rtc-core.h"
 
 static dev_t rtc_devt;
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index dad0449475b6..aaccc8ecfa8f 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2508,8 +2508,6 @@ int dasd_generic_restore_device(struct ccw_device *cdev)
 	device->stopped &= ~DASD_UNRESUMED_PM;
 
 	dasd_schedule_device_bh(device);
-	if (device->block)
-		dasd_schedule_block_bh(device->block);
 
 	if (device->discipline->restore)
 		rc = device->discipline->restore(device);
@@ -2520,6 +2518,9 @@ int dasd_generic_restore_device(struct ccw_device *cdev)
 		 */
 		device->stopped |= DASD_UNRESUMED_PM;
 
+	if (device->block)
+		dasd_schedule_block_bh(device->block);
+
 	dasd_put_device(device);
 	return 0;
 }
@@ -2532,6 +2533,7 @@ static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
 {
 	struct dasd_ccw_req *cqr;
 	struct ccw1 *ccw;
+	unsigned long *idaw;
 
 	cqr = dasd_smalloc_request(magic, 1 /* RDC */, rdc_buffer_size, device);
 
@@ -2545,9 +2547,17 @@ static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
 
 	ccw = cqr->cpaddr;
 	ccw->cmd_code = CCW_CMD_RDC;
-	ccw->cda = (__u32)(addr_t)rdc_buffer;
-	ccw->count = rdc_buffer_size;
+	if (idal_is_needed(rdc_buffer, rdc_buffer_size)) {
+		idaw = (unsigned long *) (cqr->data);
+		ccw->cda = (__u32)(addr_t) idaw;
+		ccw->flags = CCW_FLAG_IDA;
+		idaw = idal_create_words(idaw, rdc_buffer, rdc_buffer_size);
+	} else {
+		ccw->cda = (__u32)(addr_t) rdc_buffer;
+		ccw->flags = 0;
+	}
 
+	ccw->count = rdc_buffer_size;
 	cqr->startdev = device;
 	cqr->memdev = device;
 	cqr->expires = 10*HZ;
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index ab3521755588..417b97cd3f94 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2338,6 +2338,8 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 	/* Calculate number of blocks/records per track. */
 	blksize = block->bp_block;
 	blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
+	if (blk_per_trk == 0)
+		return ERR_PTR(-EINVAL);
 	/* Calculate record id of first and last block. */
 	first_rec = first_trk = blk_rq_pos(req) >> block->s2b_shift;
 	first_offs = sector_div(first_trk, blk_per_trk);
@@ -3211,8 +3213,10 @@ int dasd_eckd_pm_freeze(struct dasd_device *device)
 int dasd_eckd_restore_device(struct dasd_device *device)
 {
 	struct dasd_eckd_private *private;
+	struct dasd_eckd_characteristics temp_rdc_data;
 	int is_known, rc;
 	struct dasd_uid temp_uid;
+	unsigned long flags;
 
 	private = (struct dasd_eckd_private *) device->private;
 
@@ -3225,7 +3229,8 @@ int dasd_eckd_restore_device(struct dasd_device *device)
 	rc = dasd_eckd_generate_uid(device, &private->uid);
 	dasd_get_uid(device->cdev, &temp_uid);
 	if (memcmp(&private->uid, &temp_uid, sizeof(struct dasd_uid)) != 0)
-		dev_err(&device->cdev->dev, "The UID of the DASD has changed\n");
+		dev_err(&device->cdev->dev, "The UID of the DASD has "
+			"changed\n");
 	if (rc)
 		goto out_err;
 	dasd_set_uid(device->cdev, &private->uid);
@@ -3245,15 +3250,17 @@ int dasd_eckd_restore_device(struct dasd_device *device)
 	dasd_eckd_read_features(device);
 
 	/* Read Device Characteristics */
-	memset(&private->rdc_data, 0, sizeof(private->rdc_data));
 	rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
-					 &private->rdc_data, 64);
+					 &temp_rdc_data, 64);
 	if (rc) {
 		DBF_EVENT(DBF_WARNING,
 			  "Read device characteristics failed, rc=%d for "
 			  "device: %s", rc, dev_name(&device->cdev->dev));
 		goto out_err;
 	}
+	spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
+	memcpy(&private->rdc_data, &temp_rdc_data, sizeof(temp_rdc_data));
+	spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
 
 	/* add device to alias management */
 	dasd_alias_add_device(device);
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index d6a022f55e92..62ddf5202b79 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -1361,11 +1361,13 @@ static int raw3270_pm_start(struct ccw_device *cdev)
 
 void raw3270_pm_unfreeze(struct raw3270_view *view)
 {
+#ifdef CONFIG_TN3270_CONSOLE
 	struct raw3270 *rp;
 
 	rp = view->dev;
 	if (rp && test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
 		ccw_device_force_console();
+#endif
 }
 
 static struct ccw_device_id raw3270_id[] = {
diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c
index daaec185ed36..a4f68e5b9c96 100644
--- a/drivers/s390/char/sclp_async.c
+++ b/drivers/s390/char/sclp_async.c
@@ -62,7 +62,7 @@ static struct notifier_block call_home_panic_nb = {
 	.priority = INT_MAX,
 };
 
-static int proc_handler_callhome(ctl_table *ctl, int write, struct file *filp,
+static int proc_handler_callhome(struct ctl_table *ctl, int write,
 				 void __user *buffer, size_t *count,
 				 loff_t *ppos)
 {
@@ -100,7 +100,7 @@ static struct ctl_table callhome_table[] = {
 	{
 		.procname	= "callhome",
 		.mode		= 0644,
-		.proc_handler	= &proc_handler_callhome,
+		.proc_handler	= proc_handler_callhome,
 	},
 	{ .ctl_name = 0 }
 };
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 178724f2a4c3..b9d2a007e93b 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -705,21 +705,6 @@ out_driver:
 }
 __initcall(sclp_vt220_tty_init);
 
-#ifdef CONFIG_SCLP_VT220_CONSOLE
-
-static void
-sclp_vt220_con_write(struct console *con, const char *buf, unsigned int count)
-{
-	__sclp_vt220_write((const unsigned char *) buf, count, 1, 1, 0);
-}
-
-static struct tty_driver *
-sclp_vt220_con_device(struct console *c, int *index)
-{
-	*index = 0;
-	return sclp_vt220_driver;
-}
-
 static void __sclp_vt220_flush_buffer(void)
 {
 	unsigned long flags;
@@ -776,6 +761,21 @@ static void sclp_vt220_pm_event_fn(struct sclp_register *reg,
 	}
 }
 
+#ifdef CONFIG_SCLP_VT220_CONSOLE
+
+static void
+sclp_vt220_con_write(struct console *con, const char *buf, unsigned int count)
+{
+	__sclp_vt220_write((const unsigned char *) buf, count, 1, 1, 0);
+}
+
+static struct tty_driver *
+sclp_vt220_con_device(struct console *c, int *index)
+{
+	*index = 0;
+	return sclp_vt220_driver;
+}
+
 static int
 sclp_vt220_notify(struct notifier_block *self,
 			  unsigned long event, void *data)
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 64f57ef2763c..0c0705b91c28 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -162,9 +162,10 @@ tapeblock_requeue(struct work_struct *work) {
 	spin_lock_irq(&device->blk_data.request_queue_lock);
 	while (
 		!blk_queue_plugged(queue) &&
-		(req = blk_fetch_request(queue)) &&
+		blk_peek_request(queue) &&
 		nr_queued < TAPEBLOCK_MIN_REQUEUE
 	) {
+		req = blk_fetch_request(queue);
 		if (rq_data_dir(req) == WRITE) {
 			DBF_EVENT(1, "TBLOCK: Rejecting write request\n");
 			spin_unlock_irq(&device->blk_data.request_queue_lock);
diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c
index 6565f027791e..7eab9ab9f406 100644
--- a/drivers/s390/cio/blacklist.c
+++ b/drivers/s390/cio/blacklist.c
@@ -265,13 +265,11 @@ struct ccwdev_iter {
 static void *
 cio_ignore_proc_seq_start(struct seq_file *s, loff_t *offset)
 {
-	struct ccwdev_iter *iter;
+	struct ccwdev_iter *iter = s->private;
 
 	if (*offset >= (__MAX_SUBCHANNEL + 1) * (__MAX_SSID + 1))
 		return NULL;
-	iter = kzalloc(sizeof(struct ccwdev_iter), GFP_KERNEL);
-	if (!iter)
-		return ERR_PTR(-ENOMEM);
+	memset(iter, 0, sizeof(*iter));
 	iter->ssid = *offset / (__MAX_SUBCHANNEL + 1);
 	iter->devno = *offset % (__MAX_SUBCHANNEL + 1);
 	return iter;
@@ -280,8 +278,6 @@ cio_ignore_proc_seq_start(struct seq_file *s, loff_t *offset)
 static void
 cio_ignore_proc_seq_stop(struct seq_file *s, void *it)
 {
-	if (!IS_ERR(it))
-		kfree(it);
 }
 
 static void *
@@ -378,14 +374,15 @@ static const struct seq_operations cio_ignore_proc_seq_ops = {
 static int
 cio_ignore_proc_open(struct inode *inode, struct file *file)
 {
-	return seq_open(file, &cio_ignore_proc_seq_ops);
+	return seq_open_private(file, &cio_ignore_proc_seq_ops,
+				sizeof(struct ccwdev_iter));
 }
 
 static const struct file_operations cio_ignore_proc_fops = {
 	.open    = cio_ignore_proc_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
-	.release = seq_release,
+	.release = seq_release_private,
 	.write   = cio_ignore_write,
 };
 
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index 40002830d48a..8ab51608da55 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -393,7 +393,6 @@ int chp_new(struct chp_id chpid)
 	chp->state = 1;
 	chp->dev.parent = &channel_subsystems[chpid.cssid]->device;
 	chp->dev.release = chp_release;
-	dev_set_name(&chp->dev, "chp%x.%02x", chpid.cssid, chpid.id);
 
 	/* Obtain channel path description and fill it in. */
 	ret = chsc_determine_base_channel_path_desc(chpid, &chp->desc);
@@ -411,6 +410,7 @@ int chp_new(struct chp_id chpid)
 	} else {
 		chp->cmg = -1;
 	}
+	dev_set_name(&chp->dev, "chp%x.%02x", chpid.cssid, chpid.id);
 
 	/* make it known to the system */
 	ret = device_register(&chp->dev);
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index f780bdd3a04e..2490b741e16a 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -1250,8 +1250,7 @@ static int io_subchannel_probe(struct subchannel *sch)
 	unsigned long flags;
 	struct ccw_dev_id dev_id;
 
-	cdev = sch_get_cdev(sch);
-	if (cdev) {
+	if (cio_is_console(sch->schid)) {
 		rc = sysfs_create_group(&sch->dev.kobj,
 					&io_subchannel_attr_group);
 		if (rc)
@@ -1260,13 +1259,13 @@ static int io_subchannel_probe(struct subchannel *sch)
 				      "0.%x.%04x (rc=%d)\n",
 				      sch->schid.ssid, sch->schid.sch_no, rc);
 		/*
-		 * This subchannel already has an associated ccw_device.
+		 * The console subchannel already has an associated ccw_device.
 		 * Throw the delayed uevent for the subchannel, register
-		 * the ccw_device and exit. This happens for all early
-		 * devices, e.g. the console.
+		 * the ccw_device and exit.
 		 */
 		dev_set_uevent_suppress(&sch->dev, 0);
 		kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+		cdev = sch_get_cdev(sch);
 		cdev->dev.groups = ccwdev_attr_groups;
 		device_initialize(&cdev->dev);
 		ccw_device_register(cdev);
@@ -1609,7 +1608,7 @@ int ccw_purge_blacklisted(void)
 	return 0;
 }
 
-static void device_set_disconnected(struct ccw_device *cdev)
+void ccw_device_set_disconnected(struct ccw_device *cdev)
 {
 	if (!cdev)
 		return;
@@ -1705,7 +1704,7 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 		ccw_device_trigger_reprobe(cdev);
 		break;
 	case DISC:
-		device_set_disconnected(cdev);
+		ccw_device_set_disconnected(cdev);
 		break;
 	default:
 		break;
diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h
index ed39a2caaf47..246c6482842c 100644
--- a/drivers/s390/cio/device.h
+++ b/drivers/s390/cio/device.h
@@ -125,6 +125,7 @@ int ccw_device_stlck(struct ccw_device *);
 void ccw_device_trigger_reprobe(struct ccw_device *);
 void ccw_device_kill_io(struct ccw_device *);
 int ccw_device_notify(struct ccw_device *, int);
+void ccw_device_set_disconnected(struct ccw_device *cdev);
 void ccw_device_set_notoper(struct ccw_device *cdev);
 
 /* qdio needs this. */
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index e728ce447f6e..b9613d7df9ef 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -387,19 +387,35 @@ ccw_device_done(struct ccw_device *cdev, int state)
 
 	cdev->private->state = state;
 
-	if (state == DEV_STATE_BOXED) {
+	switch (state) {
+	case DEV_STATE_BOXED:
 		CIO_MSG_EVENT(0, "Boxed device %04x on subchannel %04x\n",
 			      cdev->private->dev_id.devno, sch->schid.sch_no);
 		if (cdev->online && !ccw_device_notify(cdev, CIO_BOXED))
 			ccw_device_schedule_sch_unregister(cdev);
 		cdev->private->flags.donotify = 0;
-	}
-	if (state == DEV_STATE_NOT_OPER) {
+		break;
+	case DEV_STATE_NOT_OPER:
 		CIO_MSG_EVENT(0, "Device %04x gone on subchannel %04x\n",
 			      cdev->private->dev_id.devno, sch->schid.sch_no);
 		if (!ccw_device_notify(cdev, CIO_GONE))
 			ccw_device_schedule_sch_unregister(cdev);
+		else
+			ccw_device_set_disconnected(cdev);
 		cdev->private->flags.donotify = 0;
+		break;
+	case DEV_STATE_DISCONNECTED:
+		CIO_MSG_EVENT(0, "Disconnected device %04x on subchannel "
+			      "%04x\n", cdev->private->dev_id.devno,
+			      sch->schid.sch_no);
+		if (!ccw_device_notify(cdev, CIO_NO_PATH))
+			ccw_device_schedule_sch_unregister(cdev);
+		else
+			ccw_device_set_disconnected(cdev);
+		cdev->private->flags.donotify = 0;
+		break;
+	default:
+		break;
 	}
 
 	if (cdev->private->flags.donotify) {
@@ -671,6 +687,10 @@ ccw_device_offline(struct ccw_device *cdev)
 		ccw_device_done(cdev, DEV_STATE_NOT_OPER);
 		return 0;
 	}
+	if (cdev->private->state == DEV_STATE_BOXED) {
+		ccw_device_done(cdev, DEV_STATE_BOXED);
+		return 0;
+	}
 	if (ccw_device_is_orphan(cdev)) {
 		ccw_device_done(cdev, DEV_STATE_OFFLINE);
 		return 0;
@@ -730,11 +750,10 @@ ccw_device_recog_notoper(struct ccw_device *cdev, enum dev_event dev_event)
 static void ccw_device_generic_notoper(struct ccw_device *cdev,
 				       enum dev_event dev_event)
 {
-	struct subchannel *sch;
-
-	ccw_device_set_notoper(cdev);
-	sch = to_subchannel(cdev->dev.parent);
-	css_schedule_eval(sch->schid);
+	if (!ccw_device_notify(cdev, CIO_GONE))
+		ccw_device_schedule_sch_unregister(cdev);
+	else
+		ccw_device_set_disconnected(cdev);
 }
 
 /*
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index 1b78f639ead3..76769978285f 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -125,7 +125,7 @@ static int qstat_seq_open(struct inode *inode, struct file *filp)
 			   filp->f_path.dentry->d_inode->i_private);
 }
 
-static struct file_operations debugfs_fops = {
+static const struct file_operations debugfs_fops = {
 	.owner	 = THIS_MODULE,
 	.open	 = qstat_seq_open,
 	.read	 = seq_read,
diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c
index eff943923c6f..968e3c7c2632 100644
--- a/drivers/s390/cio/qdio_perf.c
+++ b/drivers/s390/cio/qdio_perf.c
@@ -84,7 +84,7 @@ static int qdio_perf_seq_open(struct inode *inode, struct file *filp)
 	return single_open(filp, qdio_perf_proc_show, NULL);
 }
 
-static struct file_operations qdio_perf_proc_fops = {
+static const struct file_operations qdio_perf_proc_fops = {
 	.owner	 = THIS_MODULE,
 	.open	 = qdio_perf_seq_open,
 	.read	 = seq_read,
diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c
index c20d4790258e..5677b40e4ac0 100644
--- a/drivers/s390/crypto/zcrypt_pcixcc.c
+++ b/drivers/s390/crypto/zcrypt_pcixcc.c
@@ -361,7 +361,7 @@ static void rng_type6CPRB_msgX(struct ap_device *ap_dev,
 		.ToCardLen1	= sizeof *msg - sizeof(msg->hdr),
 		.FromCardLen1	= sizeof *msg - sizeof(msg->hdr),
 	};
-	static struct CPRBX static_cprbx = {
+	static struct CPRBX local_cprbx = {
 		.cprb_len	= 0x00dc,
 		.cprb_ver_id	= 0x02,
 		.func_id	= {0x54, 0x32},
@@ -372,7 +372,7 @@ static void rng_type6CPRB_msgX(struct ap_device *ap_dev,
 
 	msg->hdr = static_type6_hdrX;
 	msg->hdr.FromCardLen2 = random_number_length,
-	msg->cprbx = static_cprbx;
+	msg->cprbx = local_cprbx;
 	msg->cprbx.rpl_datal = random_number_length,
 	msg->cprbx.domain = AP_QID_QUEUE(ap_dev->qid);
 	memcpy(msg->function_code, msg->hdr.function_code, 0x02);
@@ -561,7 +561,8 @@ static int convert_response_ica(struct zcrypt_device *zdev,
 		if (msg->cprbx.cprb_ver_id == 0x02)
 			return convert_type86_ica(zdev, reply,
 						  outputdata, outputdatalength);
-		/* no break, incorrect cprb version is an unknown response */
+		/* Fall through, no break, incorrect cprb version is an unknown
+		 * response */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zdev->online = 0;
 		return -EAGAIN;	/* repeat the request on a different device. */
@@ -587,7 +588,8 @@ static int convert_response_xcrb(struct zcrypt_device *zdev,
 		}
 		if (msg->cprbx.cprb_ver_id == 0x02)
 			return convert_type86_xcrb(zdev, reply, xcRB);
-		/* no break, incorrect cprb version is an unknown response */
+		/* Fall through, no break, incorrect cprb version is an unknown
+		 * response */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		xcRB->status = 0x0008044DL; /* HDD_InvalidParm */
 		zdev->online = 0;
@@ -610,7 +612,8 @@ static int convert_response_rng(struct zcrypt_device *zdev,
 			return -EINVAL;
 		if (msg->cprbx.cprb_ver_id == 0x02)
 			return convert_type86_rng(zdev, reply, data);
-		/* no break, incorrect cprb version is an unknown response */
+		/* Fall through, no break, incorrect cprb version is an unknown
+		 * response */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zdev->online = 0;
 		return -EAGAIN;	/* repeat the request on a different device. */
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 1be6bf7e8ce6..2889e5f2dfd3 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -80,28 +80,35 @@ int zfcp_reqlist_isempty(struct zfcp_adapter *adapter)
 
 static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
 {
+	struct ccw_device *ccwdev;
 	struct zfcp_adapter *adapter;
 	struct zfcp_port *port;
 	struct zfcp_unit *unit;
 
-	mutex_lock(&zfcp_data.config_mutex);
-	read_lock_irq(&zfcp_data.config_lock);
-	adapter = zfcp_get_adapter_by_busid(busid);
-	if (adapter)
-		zfcp_adapter_get(adapter);
-	read_unlock_irq(&zfcp_data.config_lock);
+	ccwdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
+	if (!ccwdev)
+		return;
+
+	if (ccw_device_set_online(ccwdev))
+		goto out_ccwdev;
 
+	mutex_lock(&zfcp_data.config_mutex);
+	adapter = dev_get_drvdata(&ccwdev->dev);
 	if (!adapter)
-		goto out_adapter;
-	port = zfcp_port_enqueue(adapter, wwpn, 0, 0);
-	if (IS_ERR(port))
+		goto out_unlock;
+	zfcp_adapter_get(adapter);
+
+	port = zfcp_get_port_by_wwpn(adapter, wwpn);
+	if (!port)
 		goto out_port;
+
+	zfcp_port_get(port);
 	unit = zfcp_unit_enqueue(port, lun);
 	if (IS_ERR(unit))
 		goto out_unit;
 	mutex_unlock(&zfcp_data.config_mutex);
-	ccw_device_set_online(adapter->ccw_device);
 
+	zfcp_erp_unit_reopen(unit, 0, "auidc_1", NULL);
 	zfcp_erp_wait(adapter);
 	flush_work(&unit->scsi_work);
 
@@ -111,20 +118,23 @@ out_unit:
 	zfcp_port_put(port);
 out_port:
 	zfcp_adapter_put(adapter);
-out_adapter:
+out_unlock:
 	mutex_unlock(&zfcp_data.config_mutex);
+out_ccwdev:
+	put_device(&ccwdev->dev);
 	return;
 }
 
 static void __init zfcp_init_device_setup(char *devstr)
 {
 	char *token;
-	char *str;
+	char *str, *str_saved;
 	char busid[ZFCP_BUS_ID_SIZE];
 	u64 wwpn, lun;
 
 	/* duplicate devstr and keep the original for sysfs presentation*/
-	str = kmalloc(strlen(devstr) + 1, GFP_KERNEL);
+	str_saved = kmalloc(strlen(devstr) + 1, GFP_KERNEL);
+	str = str_saved;
 	if (!str)
 		return;
 
@@ -143,12 +153,12 @@ static void __init zfcp_init_device_setup(char *devstr)
 	if (!token || strict_strtoull(token, 0, (unsigned long long *) &lun))
 		goto err_out;
 
-	kfree(str);
+	kfree(str_saved);
 	zfcp_init_device_configure(busid, wwpn, lun);
 	return;
 
- err_out:
-	kfree(str);
+err_out:
+	kfree(str_saved);
 	pr_err("%s is not a valid SCSI device\n", devstr);
 }
 
@@ -593,10 +603,8 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
 	int retval = 0;
 	unsigned long flags;
 
-	cancel_work_sync(&adapter->scan_work);
 	cancel_work_sync(&adapter->stat_work);
 	zfcp_fc_wka_ports_force_offline(adapter->gs);
-	zfcp_adapter_scsi_unregister(adapter);
 	sysfs_remove_group(&adapter->ccw_device->dev.kobj,
 			   &zfcp_sysfs_adapter_attrs);
 	dev_set_drvdata(&adapter->ccw_device->dev, NULL);
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 0c90f8e71605..e08339428ecf 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -102,6 +102,14 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
 	adapter = dev_get_drvdata(&ccw_device->dev);
 	if (!adapter)
 		goto out;
+	mutex_unlock(&zfcp_data.config_mutex);
+
+	cancel_work_sync(&adapter->scan_work);
+
+	mutex_lock(&zfcp_data.config_mutex);
+
+	/* this also removes the scsi devices, so call it first */
+	zfcp_adapter_scsi_unregister(adapter);
 
 	write_lock_irq(&zfcp_data.config_lock);
 	list_for_each_entry_safe(port, p, &adapter->port_list_head, list) {
@@ -117,11 +125,8 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
 	write_unlock_irq(&zfcp_data.config_lock);
 
 	list_for_each_entry_safe(port, p, &port_remove_lh, list) {
-		list_for_each_entry_safe(unit, u, &unit_remove_lh, list) {
-			if (unit->device)
-				scsi_remove_device(unit->device);
+		list_for_each_entry_safe(unit, u, &unit_remove_lh, list)
 			zfcp_unit_dequeue(unit);
-		}
 		zfcp_port_dequeue(port);
 	}
 	wait_event(adapter->remove_wq, atomic_read(&adapter->refcount) == 0);
@@ -192,13 +197,9 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
 
 	mutex_lock(&zfcp_data.config_mutex);
 	adapter = dev_get_drvdata(&ccw_device->dev);
-	if (!adapter)
-		goto out;
-
 	zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1", NULL);
 	zfcp_erp_wait(adapter);
 	mutex_unlock(&zfcp_data.config_mutex);
-out:
 	return 0;
 }
 
@@ -253,13 +254,17 @@ static void zfcp_ccw_shutdown(struct ccw_device *cdev)
 
 	mutex_lock(&zfcp_data.config_mutex);
 	adapter = dev_get_drvdata(&cdev->dev);
+	if (!adapter)
+		goto out;
+
 	zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1", NULL);
 	zfcp_erp_wait(adapter);
 	zfcp_erp_thread_kill(adapter);
+out:
 	mutex_unlock(&zfcp_data.config_mutex);
 }
 
-static struct ccw_driver zfcp_ccw_driver = {
+struct ccw_driver zfcp_ccw_driver = {
 	.owner       = THIS_MODULE,
 	.name        = "zfcp",
 	.ids         = zfcp_ccw_device_id,
@@ -284,20 +289,3 @@ int __init zfcp_ccw_register(void)
 {
 	return ccw_driver_register(&zfcp_ccw_driver);
 }
-
-/**
- * zfcp_get_adapter_by_busid - find zfcp_adapter struct
- * @busid: bus id string of zfcp adapter to find
- */
-struct zfcp_adapter *zfcp_get_adapter_by_busid(char *busid)
-{
-	struct ccw_device *ccw_device;
-	struct zfcp_adapter *adapter = NULL;
-
-	ccw_device = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
-	if (ccw_device) {
-		adapter = dev_get_drvdata(&ccw_device->dev);
-		put_device(&ccw_device->dev);
-	}
-	return adapter;
-}
diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c
index 8305c874e86f..ef681dfed0cc 100644
--- a/drivers/s390/scsi/zfcp_cfdc.c
+++ b/drivers/s390/scsi/zfcp_cfdc.c
@@ -86,8 +86,23 @@ static int zfcp_cfdc_copy_to_user(void __user  *user_buffer,
 static struct zfcp_adapter *zfcp_cfdc_get_adapter(u32 devno)
 {
 	char busid[9];
+	struct ccw_device *ccwdev;
+	struct zfcp_adapter *adapter = NULL;
+
 	snprintf(busid, sizeof(busid), "0.0.%04x", devno);
-	return zfcp_get_adapter_by_busid(busid);
+	ccwdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
+	if (!ccwdev)
+		goto out;
+
+	adapter = dev_get_drvdata(&ccwdev->dev);
+	if (!adapter)
+		goto out_put;
+
+	zfcp_adapter_get(adapter);
+out_put:
+	put_device(&ccwdev->dev);
+out:
+	return adapter;
 }
 
 static int zfcp_cfdc_set_fsf(struct zfcp_fsf_cfdc *fsf_cfdc, int command)
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 73d366ba31e5..f73e2180f333 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -858,10 +858,7 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act)
 		if (fc_host_port_type(adapter->scsi_host) == FC_PORTTYPE_PTP)
 			return zfcp_erp_open_ptp_port(act);
 		if (!port->d_id) {
-			zfcp_port_get(port);
-			if (!queue_work(adapter->work_queue,
-					&port->gid_pn_work))
-				zfcp_port_put(port);
+			zfcp_fc_trigger_did_lookup(port);
 			return ZFCP_ERP_EXIT;
 		}
 		return zfcp_erp_port_strategy_open_port(act);
@@ -869,12 +866,11 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act)
 	case ZFCP_ERP_STEP_PORT_OPENING:
 		/* D_ID might have changed during open */
 		if (p_status & ZFCP_STATUS_COMMON_OPEN) {
-			if (port->d_id)
-				return ZFCP_ERP_SUCCEEDED;
-			else {
-				act->step = ZFCP_ERP_STEP_PORT_CLOSING;
-				return ZFCP_ERP_CONTINUES;
+			if (!port->d_id) {
+				zfcp_fc_trigger_did_lookup(port);
+				return ZFCP_ERP_EXIT;
 			}
+			return ZFCP_ERP_SUCCEEDED;
 		}
 		if (port->d_id && !(p_status & ZFCP_STATUS_COMMON_NOESC)) {
 			port->d_id = 0;
@@ -889,19 +885,21 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act)
 static int zfcp_erp_port_strategy(struct zfcp_erp_action *erp_action)
 {
 	struct zfcp_port *port = erp_action->port;
+	int p_status = atomic_read(&port->status);
 
-	if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC)
+	if ((p_status & ZFCP_STATUS_COMMON_NOESC) &&
+	    !(p_status & ZFCP_STATUS_COMMON_OPEN))
 		goto close_init_done;
 
 	switch (erp_action->step) {
 	case ZFCP_ERP_STEP_UNINITIALIZED:
 		zfcp_erp_port_strategy_clearstati(port);
-		if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)
+		if (p_status & ZFCP_STATUS_COMMON_OPEN)
 			return zfcp_erp_port_strategy_close(erp_action);
 		break;
 
 	case ZFCP_ERP_STEP_PORT_CLOSING:
-		if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)
+		if (p_status & ZFCP_STATUS_COMMON_OPEN)
 			return ZFCP_ERP_FAILED;
 		break;
 	}
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 36935bc0818f..b3f28deb4505 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -28,7 +28,7 @@ extern int zfcp_sg_setup_table(struct scatterlist *, int);
 /* zfcp_ccw.c */
 extern int zfcp_ccw_register(void);
 extern int zfcp_ccw_priv_sch(struct zfcp_adapter *);
-extern struct zfcp_adapter *zfcp_get_adapter_by_busid(char *);
+extern struct ccw_driver zfcp_ccw_driver;
 
 /* zfcp_cfdc.c */
 extern struct miscdevice zfcp_cfdc_misc;
@@ -96,6 +96,7 @@ extern int zfcp_fc_scan_ports(struct zfcp_adapter *);
 extern void _zfcp_fc_scan_ports_later(struct work_struct *);
 extern void zfcp_fc_incoming_els(struct zfcp_fsf_req *);
 extern void zfcp_fc_port_did_lookup(struct work_struct *);
+extern void zfcp_fc_trigger_did_lookup(struct zfcp_port *);
 extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *);
 extern void zfcp_fc_test_link(struct zfcp_port *);
 extern void zfcp_fc_link_test_work(struct work_struct *);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 722f22de8753..df23bcead23d 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -361,6 +361,17 @@ out:
 }
 
 /**
+ * zfcp_fc_trigger_did_lookup - trigger the d_id lookup using a GID_PN request
+ * @port: The zfcp_port to lookup the d_id for.
+ */
+void zfcp_fc_trigger_did_lookup(struct zfcp_port *port)
+{
+	zfcp_port_get(port);
+	if (!queue_work(port->adapter->work_queue, &port->gid_pn_work))
+		zfcp_port_put(port);
+}
+
+/**
  * zfcp_fc_plogi_evaluate - evaluate PLOGI playload
  * @port: zfcp_port structure
  * @plogi: plogi payload
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index f09c863dc6bd..4e41baa0c141 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -1058,14 +1058,28 @@ static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req,
 	bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->queue_req,
 					SBAL_FLAGS0_TYPE_WRITE_READ,
 					sg_resp, max_sbals);
+	req->qtcb->bottom.support.resp_buf_length = bytes;
 	if (bytes <= 0)
 		return -EIO;
 
+	return 0;
+}
+
+static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req,
+				 struct scatterlist *sg_req,
+				 struct scatterlist *sg_resp,
+				 int max_sbals)
+{
+	int ret;
+
+	ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp, max_sbals);
+	if (ret)
+		return ret;
+
 	/* common settings for ct/gs and els requests */
-	req->qtcb->bottom.support.resp_buf_length = bytes;
 	req->qtcb->bottom.support.service_class = FSF_CLASS_3;
 	req->qtcb->bottom.support.timeout = 2 * R_A_TOV;
-	zfcp_fsf_start_timer(req, 2 * R_A_TOV + 10);
+	zfcp_fsf_start_timer(req, (2 * R_A_TOV + 10) * HZ);
 
 	return 0;
 }
@@ -1094,8 +1108,8 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool)
 	}
 
 	req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
-	ret = zfcp_fsf_setup_ct_els_sbals(req, ct->req, ct->resp,
-					  FSF_MAX_SBALS_PER_REQ);
+	ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp,
+				    FSF_MAX_SBALS_PER_REQ);
 	if (ret)
 		goto failed_send;
 
@@ -1192,7 +1206,7 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els)
 	}
 
 	req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
-	ret = zfcp_fsf_setup_ct_els_sbals(req, els->req, els->resp, 2);
+	ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2);
 
 	if (ret)
 		goto failed_send;
@@ -1461,9 +1475,16 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 		plogi = (struct fsf_plogi *) req->qtcb->bottom.support.els;
 		if (req->qtcb->bottom.support.els1_length >=
 		    FSF_PLOGI_MIN_LEN) {
-			if (plogi->serv_param.wwpn != port->wwpn)
+			if (plogi->serv_param.wwpn != port->wwpn) {
 				port->d_id = 0;
-			else {
+				dev_warn(&port->adapter->ccw_device->dev,
+					 "A port opened with WWPN 0x%016Lx "
+					 "returned data that identifies it as "
+					 "WWPN 0x%016Lx\n",
+					 (unsigned long long) port->wwpn,
+					 (unsigned long long)
+					  plogi->serv_param.wwpn);
+			} else {
 				port->wwnn = plogi->serv_param.wwnn;
 				zfcp_fc_plogi_evaluate(port, plogi);
 			}
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index 079a8cf518a3..d31000886ca8 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -224,6 +224,7 @@ static ssize_t zfcp_sysfs_unit_add_store(struct device *dev,
 
 	zfcp_erp_unit_reopen(unit, 0, "syuas_1", NULL);
 	zfcp_erp_wait(unit->port->adapter);
+	flush_work(&unit->scsi_work);
 	zfcp_unit_put(unit);
 out:
 	mutex_unlock(&zfcp_data.config_mutex);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 82bb3b2d207a..e11cca4c784c 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -366,6 +366,7 @@ config ISCSI_TCP
 
 source "drivers/scsi/cxgb3i/Kconfig"
 source "drivers/scsi/bnx2i/Kconfig"
+source "drivers/scsi/be2iscsi/Kconfig"
 
 config SGIWD93_SCSI
 	tristate "SGI WD93C93 SCSI Driver"
@@ -1827,6 +1828,16 @@ config SCSI_SRP
 	  To compile this driver as a module, choose M here: the
 	  module will be called libsrp.
 
+config SCSI_BFA_FC
+	tristate "Brocade BFA Fibre Channel Support"
+	depends on PCI && SCSI
+	select SCSI_FC_ATTRS
+	help
+	  This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called bfa.
+
 endif # SCSI_LOWLEVEL
 
 source "drivers/scsi/pcmcia/Kconfig"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 61a94af3cee7..3ad61db5e3fa 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -86,6 +86,7 @@ obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o
 obj-$(CONFIG_SCSI_QLA_FC)	+= qla2xxx/
 obj-$(CONFIG_SCSI_QLA_ISCSI)	+= qla4xxx/
 obj-$(CONFIG_SCSI_LPFC)		+= lpfc/
+obj-$(CONFIG_SCSI_BFA_FC)	+= bfa/
 obj-$(CONFIG_SCSI_PAS16)	+= pas16.o
 obj-$(CONFIG_SCSI_T128)		+= t128.o
 obj-$(CONFIG_SCSI_DMX3191D)	+= dmx3191d.o
@@ -130,6 +131,7 @@ obj-$(CONFIG_SCSI_MVSAS)	+= mvsas/
 obj-$(CONFIG_PS3_ROM)		+= ps3rom.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgb3i/
 obj-$(CONFIG_SCSI_BNX2_ISCSI)	+= libiscsi.o bnx2i/
+obj-$(CONFIG_BE2ISCSI)		+= libiscsi.o be2iscsi/
 obj-$(CONFIG_SCSI_PMCRAID)	+= pmcraid.o
 
 obj-$(CONFIG_ARM)		+= arm/
diff --git a/drivers/scsi/be2iscsi/Kconfig b/drivers/scsi/be2iscsi/Kconfig
new file mode 100644
index 000000000000..2952fcd008ea
--- /dev/null
+++ b/drivers/scsi/be2iscsi/Kconfig
@@ -0,0 +1,8 @@
+config BE2ISCSI
+	tristate "ServerEngines' 10Gbps iSCSI - BladeEngine 2"
+	depends on PCI && SCSI
+	select SCSI_ISCSI_ATTRS
+
+	help
+	This driver implements the iSCSI functionality for ServerEngines'
+	10Gbps Storage adapter - BladeEngine 2.
diff --git a/drivers/scsi/be2iscsi/Makefile b/drivers/scsi/be2iscsi/Makefile
new file mode 100644
index 000000000000..c11f443e3f83
--- /dev/null
+++ b/drivers/scsi/be2iscsi/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile to build the iSCSI driver for ServerEngine's BladeEngine.
+#
+#
+
+obj-$(CONFIG_BE2ISCSI) += be2iscsi.o
+
+be2iscsi-y := be_iscsi.o be_main.o be_mgmt.o be_cmds.o
diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h
new file mode 100644
index 000000000000..b36020dcf012
--- /dev/null
+++ b/drivers/scsi/be2iscsi/be.h
@@ -0,0 +1,183 @@
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#ifndef BEISCSI_H
+#define BEISCSI_H
+
+#include <linux/pci.h>
+#include <linux/if_vlan.h>
+
+#define FW_VER_LEN 32
+
+struct be_dma_mem {
+	void *va;
+	dma_addr_t dma;
+	u32 size;
+};
+
+struct be_queue_info {
+	struct be_dma_mem dma_mem;
+	u16 len;
+	u16 entry_size;		/* Size of an element in the queue */
+	u16 id;
+	u16 tail, head;
+	bool created;
+	atomic_t used;		/* Number of valid elements in the queue */
+};
+
+static inline u32 MODULO(u16 val, u16 limit)
+{
+	WARN_ON(limit & (limit - 1));
+	return val & (limit - 1);
+}
+
+static inline void index_inc(u16 *index, u16 limit)
+{
+	*index = MODULO((*index + 1), limit);
+}
+
+static inline void *queue_head_node(struct be_queue_info *q)
+{
+	return q->dma_mem.va + q->head * q->entry_size;
+}
+
+static inline void *queue_tail_node(struct be_queue_info *q)
+{
+	return q->dma_mem.va + q->tail * q->entry_size;
+}
+
+static inline void queue_head_inc(struct be_queue_info *q)
+{
+	index_inc(&q->head, q->len);
+}
+
+static inline void queue_tail_inc(struct be_queue_info *q)
+{
+	index_inc(&q->tail, q->len);
+}
+
+/*ISCSI */
+
+struct be_eq_obj {
+	struct be_queue_info q;
+	char desc[32];
+
+	/* Adaptive interrupt coalescing (AIC) info */
+	bool enable_aic;
+	u16 min_eqd;		/* in usecs */
+	u16 max_eqd;		/* in usecs */
+	u16 cur_eqd;		/* in usecs */
+};
+
+struct be_mcc_obj {
+	struct be_queue_info *q;
+	struct be_queue_info *cq;
+};
+
+struct be_ctrl_info {
+	u8 __iomem *csr;
+	u8 __iomem *db;		/* Door Bell */
+	u8 __iomem *pcicfg;	/* PCI config space */
+	struct pci_dev *pdev;
+
+	/* Mbox used for cmd request/response */
+	spinlock_t mbox_lock;	/* For serializing mbox cmds to BE card */
+	struct be_dma_mem mbox_mem;
+	/* Mbox mem is adjusted to align to 16 bytes. The allocated addr
+	 * is stored for freeing purpose */
+	struct be_dma_mem mbox_mem_alloced;
+
+	/* MCC Rings */
+	struct be_mcc_obj mcc_obj;
+	spinlock_t mcc_lock;	/* For serializing mcc cmds to BE card */
+	spinlock_t mcc_cq_lock;
+
+	/* MCC Async callback */
+	void (*async_cb) (void *adapter, bool link_up);
+	void *adapter_ctxt;
+};
+
+#include "be_cmds.h"
+
+#define PAGE_SHIFT_4K 12
+#define PAGE_SIZE_4K (1 << PAGE_SHIFT_4K)
+
+/* Returns number of pages spanned by the data starting at the given addr */
+#define PAGES_4K_SPANNED(_address, size) 				\
+		((u32)((((size_t)(_address) & (PAGE_SIZE_4K - 1)) + 	\
+			(size) + (PAGE_SIZE_4K - 1)) >> PAGE_SHIFT_4K))
+
+/* Byte offset into the page corresponding to given address */
+#define OFFSET_IN_PAGE(addr)						\
+		((size_t)(addr) & (PAGE_SIZE_4K-1))
+
+/* Returns bit offset within a DWORD of a bitfield */
+#define AMAP_BIT_OFFSET(_struct, field)  				\
+		(((size_t)&(((_struct *)0)->field))%32)
+
+/* Returns the bit mask of the field that is NOT shifted into location. */
+static inline u32 amap_mask(u32 bitsize)
+{
+	return (bitsize == 32 ? 0xFFFFFFFF : (1 << bitsize) - 1);
+}
+
+static inline void amap_set(void *ptr, u32 dw_offset, u32 mask,
+					u32 offset, u32 value)
+{
+	u32 *dw = (u32 *) ptr + dw_offset;
+	*dw &= ~(mask << offset);
+	*dw |= (mask & value) << offset;
+}
+
+#define AMAP_SET_BITS(_struct, field, ptr, val)				\
+		amap_set(ptr,						\
+			offsetof(_struct, field)/32,			\
+			amap_mask(sizeof(((_struct *)0)->field)),	\
+			AMAP_BIT_OFFSET(_struct, field),		\
+			val)
+
+static inline u32 amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
+{
+	u32 *dw = ptr;
+	return mask & (*(dw + dw_offset) >> offset);
+}
+
+#define AMAP_GET_BITS(_struct, field, ptr)				\
+		amap_get(ptr,						\
+			offsetof(_struct, field)/32,			\
+			amap_mask(sizeof(((_struct *)0)->field)),	\
+			AMAP_BIT_OFFSET(_struct, field))
+
+#define be_dws_cpu_to_le(wrb, len) swap_dws(wrb, len)
+#define be_dws_le_to_cpu(wrb, len) swap_dws(wrb, len)
+static inline void swap_dws(void *wrb, int len)
+{
+#ifdef __BIG_ENDIAN
+	u32 *dw = wrb;
+	WARN_ON(len % 4);
+	do {
+		*dw = cpu_to_le32(*dw);
+		dw++;
+		len -= 4;
+	} while (len);
+#endif /* __BIG_ENDIAN */
+}
+
+extern void beiscsi_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
+			      u16 num_popped);
+
+#endif /* BEISCSI_H */
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
new file mode 100644
index 000000000000..08007b6e42df
--- /dev/null
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -0,0 +1,523 @@
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#include "be.h"
+#include "be_mgmt.h"
+#include "be_main.h"
+
+static inline bool be_mcc_compl_is_new(struct be_mcc_compl *compl)
+{
+	if (compl->flags != 0) {
+		compl->flags = le32_to_cpu(compl->flags);
+		WARN_ON((compl->flags & CQE_FLAGS_VALID_MASK) == 0);
+		return true;
+	} else
+		return false;
+}
+
+static inline void be_mcc_compl_use(struct be_mcc_compl *compl)
+{
+	compl->flags = 0;
+}
+
+static int be_mcc_compl_process(struct be_ctrl_info *ctrl,
+				struct be_mcc_compl *compl)
+{
+	u16 compl_status, extd_status;
+
+	be_dws_le_to_cpu(compl, 4);
+
+	compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
+					CQE_STATUS_COMPL_MASK;
+	if (compl_status != MCC_STATUS_SUCCESS) {
+		extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
+						CQE_STATUS_EXTD_MASK;
+		dev_err(&ctrl->pdev->dev,
+			"error in cmd completion: status(compl/extd)=%d/%d\n",
+			compl_status, extd_status);
+		return -1;
+	}
+	return 0;
+}
+
+static inline bool is_link_state_evt(u32 trailer)
+{
+	return (((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
+		ASYNC_TRAILER_EVENT_CODE_MASK) == ASYNC_EVENT_CODE_LINK_STATE);
+}
+
+void beiscsi_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
+		       u16 num_popped)
+{
+	u32 val = 0;
+	val |= qid & DB_CQ_RING_ID_MASK;
+	if (arm)
+		val |= 1 << DB_CQ_REARM_SHIFT;
+	val |= num_popped << DB_CQ_NUM_POPPED_SHIFT;
+	iowrite32(val, ctrl->db + DB_CQ_OFFSET);
+}
+
+static int be_mbox_db_ready_wait(struct be_ctrl_info *ctrl)
+{
+#define long_delay 2000
+	void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
+	int cnt = 0, wait = 5;	/* in usecs */
+	u32 ready;
+
+	do {
+		ready = ioread32(db) & MPU_MAILBOX_DB_RDY_MASK;
+		if (ready)
+			break;
+
+		if (cnt > 6000000) {
+			dev_err(&ctrl->pdev->dev, "mbox_db poll timed out\n");
+			return -1;
+		}
+
+		if (cnt > 50) {
+			wait = long_delay;
+			mdelay(long_delay / 1000);
+		} else
+			udelay(wait);
+		cnt += wait;
+	} while (true);
+	return 0;
+}
+
+int be_mbox_notify(struct be_ctrl_info *ctrl)
+{
+	int status;
+	u32 val = 0;
+	void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
+	struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
+	struct be_mcc_mailbox *mbox = mbox_mem->va;
+	struct be_mcc_compl *compl = &mbox->compl;
+
+	val &= ~MPU_MAILBOX_DB_RDY_MASK;
+	val |= MPU_MAILBOX_DB_HI_MASK;
+	val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
+	iowrite32(val, db);
+
+	status = be_mbox_db_ready_wait(ctrl);
+	if (status != 0) {
+		SE_DEBUG(DBG_LVL_1, " be_mbox_db_ready_wait failed 1\n");
+		return status;
+	}
+	val = 0;
+	val &= ~MPU_MAILBOX_DB_RDY_MASK;
+	val &= ~MPU_MAILBOX_DB_HI_MASK;
+	val |= (u32) (mbox_mem->dma >> 4) << 2;
+	iowrite32(val, db);
+
+	status = be_mbox_db_ready_wait(ctrl);
+	if (status != 0) {
+		SE_DEBUG(DBG_LVL_1, " be_mbox_db_ready_wait failed 2\n");
+		return status;
+	}
+	if (be_mcc_compl_is_new(compl)) {
+		status = be_mcc_compl_process(ctrl, &mbox->compl);
+		be_mcc_compl_use(compl);
+		if (status) {
+			SE_DEBUG(DBG_LVL_1, "After be_mcc_compl_process \n");
+			return status;
+		}
+	} else {
+		dev_err(&ctrl->pdev->dev, "invalid mailbox completion\n");
+		return -1;
+	}
+	return 0;
+}
+
+void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
+				bool embedded, u8 sge_cnt)
+{
+	if (embedded)
+		wrb->embedded |= MCC_WRB_EMBEDDED_MASK;
+	else
+		wrb->embedded |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) <<
+						MCC_WRB_SGE_CNT_SHIFT;
+	wrb->payload_length = payload_len;
+	be_dws_cpu_to_le(wrb, 8);
+}
+
+void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
+			u8 subsystem, u8 opcode, int cmd_len)
+{
+	req_hdr->opcode = opcode;
+	req_hdr->subsystem = subsystem;
+	req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+}
+
+static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
+							struct be_dma_mem *mem)
+{
+	int i, buf_pages;
+	u64 dma = (u64) mem->dma;
+
+	buf_pages = min(PAGES_4K_SPANNED(mem->va, mem->size), max_pages);
+	for (i = 0; i < buf_pages; i++) {
+		pages[i].lo = cpu_to_le32(dma & 0xFFFFFFFF);
+		pages[i].hi = cpu_to_le32(upper_32_bits(dma));
+		dma += PAGE_SIZE_4K;
+	}
+}
+
+static u32 eq_delay_to_mult(u32 usec_delay)
+{
+#define MAX_INTR_RATE 651042
+	const u32 round = 10;
+	u32 multiplier;
+
+	if (usec_delay == 0)
+		multiplier = 0;
+	else {
+		u32 interrupt_rate = 1000000 / usec_delay;
+		if (interrupt_rate == 0)
+			multiplier = 1023;
+		else {
+			multiplier = (MAX_INTR_RATE - interrupt_rate) * round;
+			multiplier /= interrupt_rate;
+			multiplier = (multiplier + round / 2) / round;
+			multiplier = min(multiplier, (u32) 1023);
+		}
+	}
+	return multiplier;
+}
+
+struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem)
+{
+	return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
+}
+
+int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl,
+			  struct be_queue_info *eq, int eq_delay)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_eq_create *req = embedded_payload(wrb);
+	struct be_cmd_resp_eq_create *resp = embedded_payload(wrb);
+	struct be_dma_mem *q_mem = &eq->dma_mem;
+	int status;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			OPCODE_COMMON_EQ_CREATE, sizeof(*req));
+
+	req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+
+	AMAP_SET_BITS(struct amap_eq_context, func, req->context,
+						PCI_FUNC(ctrl->pdev->devfn));
+	AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
+	AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
+	AMAP_SET_BITS(struct amap_eq_context, count, req->context,
+					__ilog2_u32(eq->len / 256));
+	AMAP_SET_BITS(struct amap_eq_context, delaymult, req->context,
+					eq_delay_to_mult(eq_delay));
+	be_dws_cpu_to_le(req->context, sizeof(req->context));
+
+	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+	status = be_mbox_notify(ctrl);
+	if (!status) {
+		eq->id = le16_to_cpu(resp->eq_id);
+		eq->created = true;
+	}
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+int be_cmd_fw_initialize(struct be_ctrl_info *ctrl)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	int status;
+	u8 *endian_check;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	endian_check = (u8 *) wrb;
+	*endian_check++ = 0xFF;
+	*endian_check++ = 0x12;
+	*endian_check++ = 0x34;
+	*endian_check++ = 0xFF;
+	*endian_check++ = 0xFF;
+	*endian_check++ = 0x56;
+	*endian_check++ = 0x78;
+	*endian_check++ = 0xFF;
+	be_dws_cpu_to_le(wrb, sizeof(*wrb));
+
+	status = be_mbox_notify(ctrl);
+	if (status)
+		SE_DEBUG(DBG_LVL_1, "be_cmd_fw_initialize Failed \n");
+
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl,
+			  struct be_queue_info *cq, struct be_queue_info *eq,
+			  bool sol_evts, bool no_delay, int coalesce_wm)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_cq_create *req = embedded_payload(wrb);
+	struct be_cmd_resp_cq_create *resp = embedded_payload(wrb);
+	struct be_dma_mem *q_mem = &cq->dma_mem;
+	void *ctxt = &req->context;
+	int status;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			OPCODE_COMMON_CQ_CREATE, sizeof(*req));
+
+	if (!q_mem->va)
+		SE_DEBUG(DBG_LVL_1, "uninitialized q_mem->va\n");
+
+	req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+
+	AMAP_SET_BITS(struct amap_cq_context, coalescwm, ctxt, coalesce_wm);
+	AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay);
+	AMAP_SET_BITS(struct amap_cq_context, count, ctxt,
+		      __ilog2_u32(cq->len / 256));
+	AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1);
+	AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
+	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
+	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
+	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
+	AMAP_SET_BITS(struct amap_cq_context, func, ctxt,
+		      PCI_FUNC(ctrl->pdev->devfn));
+	be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+	status = be_mbox_notify(ctrl);
+	if (!status) {
+		cq->id = le16_to_cpu(resp->cq_id);
+		cq->created = true;
+	} else
+		SE_DEBUG(DBG_LVL_1, "In be_cmd_cq_create, status=ox%08x \n",
+			status);
+	spin_unlock(&ctrl->mbox_lock);
+
+	return status;
+}
+
+static u32 be_encoded_q_len(int q_len)
+{
+	u32 len_encoded = fls(q_len);	/* log2(len) + 1 */
+	if (len_encoded == 16)
+		len_encoded = 0;
+	return len_encoded;
+}
+int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+			  int queue_type)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_q_destroy *req = embedded_payload(wrb);
+	u8 subsys = 0, opcode = 0;
+	int status;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	switch (queue_type) {
+	case QTYPE_EQ:
+		subsys = CMD_SUBSYSTEM_COMMON;
+		opcode = OPCODE_COMMON_EQ_DESTROY;
+		break;
+	case QTYPE_CQ:
+		subsys = CMD_SUBSYSTEM_COMMON;
+		opcode = OPCODE_COMMON_CQ_DESTROY;
+		break;
+	case QTYPE_WRBQ:
+		subsys = CMD_SUBSYSTEM_ISCSI;
+		opcode = OPCODE_COMMON_ISCSI_WRBQ_DESTROY;
+		break;
+	case QTYPE_DPDUQ:
+		subsys = CMD_SUBSYSTEM_ISCSI;
+		opcode = OPCODE_COMMON_ISCSI_DEFQ_DESTROY;
+		break;
+	case QTYPE_SGL:
+		subsys = CMD_SUBSYSTEM_ISCSI;
+		opcode = OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES;
+		break;
+	default:
+		spin_unlock(&ctrl->mbox_lock);
+		BUG();
+		return -1;
+	}
+	be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
+	if (queue_type != QTYPE_SGL)
+		req->id = cpu_to_le16(q->id);
+
+	status = be_mbox_notify(ctrl);
+
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+int be_cmd_get_mac_addr(struct be_ctrl_info *ctrl, u8 *mac_addr)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_get_mac_addr *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+			   OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG,
+			   sizeof(*req));
+
+	status = be_mbox_notify(ctrl);
+	if (!status) {
+		struct be_cmd_resp_get_mac_addr *resp = embedded_payload(wrb);
+
+		memcpy(mac_addr, resp->mac_address, ETH_ALEN);
+	}
+
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+int be_cmd_create_default_pdu_queue(struct be_ctrl_info *ctrl,
+				    struct be_queue_info *cq,
+				    struct be_queue_info *dq, int length,
+				    int entry_size)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_defq_create_req *req = embedded_payload(wrb);
+	struct be_dma_mem *q_mem = &dq->dma_mem;
+	void *ctxt = &req->context;
+	int status;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+			   OPCODE_COMMON_ISCSI_DEFQ_CREATE, sizeof(*req));
+
+	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+	AMAP_SET_BITS(struct amap_be_default_pdu_context, rx_pdid, ctxt, 0);
+	AMAP_SET_BITS(struct amap_be_default_pdu_context, rx_pdid_valid, ctxt,
+		      1);
+	AMAP_SET_BITS(struct amap_be_default_pdu_context, pci_func_id, ctxt,
+		      PCI_FUNC(ctrl->pdev->devfn));
+	AMAP_SET_BITS(struct amap_be_default_pdu_context, ring_size, ctxt,
+		      be_encoded_q_len(length / sizeof(struct phys_addr)));
+	AMAP_SET_BITS(struct amap_be_default_pdu_context, default_buffer_size,
+		      ctxt, entry_size);
+	AMAP_SET_BITS(struct amap_be_default_pdu_context, cq_id_recv, ctxt,
+		      cq->id);
+
+	be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+	status = be_mbox_notify(ctrl);
+	if (!status) {
+		struct be_defq_create_resp *resp = embedded_payload(wrb);
+
+		dq->id = le16_to_cpu(resp->id);
+		dq->created = true;
+	}
+	spin_unlock(&ctrl->mbox_lock);
+
+	return status;
+}
+
+int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, struct be_dma_mem *q_mem,
+		       struct be_queue_info *wrbq)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_wrbq_create_req *req = embedded_payload(wrb);
+	struct be_wrbq_create_resp *resp = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+		OPCODE_COMMON_ISCSI_WRBQ_CREATE, sizeof(*req));
+	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+	status = be_mbox_notify(ctrl);
+	if (!status)
+		wrbq->id = le16_to_cpu(resp->cid);
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl,
+				struct be_dma_mem *q_mem,
+				u32 page_offset, u32 num_pages)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_post_sgl_pages_req *req = embedded_payload(wrb);
+	int status;
+	unsigned int curr_pages;
+	u32 internal_page_offset = 0;
+	u32 temp_num_pages = num_pages;
+
+	if (num_pages == 0xff)
+		num_pages = 1;
+
+	spin_lock(&ctrl->mbox_lock);
+	do {
+		memset(wrb, 0, sizeof(*wrb));
+		be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+		be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+				   OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES,
+				   sizeof(*req));
+		curr_pages = BE_NUMBER_OF_FIELD(struct be_post_sgl_pages_req,
+						pages);
+		req->num_pages = min(num_pages, curr_pages);
+		req->page_offset = page_offset;
+		be_cmd_page_addrs_prepare(req->pages, req->num_pages, q_mem);
+		q_mem->dma = q_mem->dma + (req->num_pages * PAGE_SIZE);
+		internal_page_offset += req->num_pages;
+		page_offset += req->num_pages;
+		num_pages -= req->num_pages;
+
+		if (temp_num_pages == 0xff)
+			req->num_pages = temp_num_pages;
+
+		status = be_mbox_notify(ctrl);
+		if (status) {
+			SE_DEBUG(DBG_LVL_1,
+				 "FW CMD to map iscsi frags failed.\n");
+			goto error;
+		}
+	} while (num_pages > 0);
+error:
+	spin_unlock(&ctrl->mbox_lock);
+	if (status != 0)
+		beiscsi_cmd_q_destroy(ctrl, NULL, QTYPE_SGL);
+	return status;
+}
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
new file mode 100644
index 000000000000..c20d686cbb43
--- /dev/null
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -0,0 +1,877 @@
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#ifndef BEISCSI_CMDS_H
+#define BEISCSI_CMDS_H
+
+/**
+ * The driver sends configuration and managements command requests to the
+ * firmware in the BE. These requests are communicated to the processor
+ * using Work Request Blocks (WRBs) submitted to the MCC-WRB ring or via one
+ * WRB inside a MAILBOX.
+ * The commands are serviced by the ARM processor in the BladeEngine's MPU.
+ */
+struct be_sge {
+	u32 pa_lo;
+	u32 pa_hi;
+	u32 len;
+};
+
+#define MCC_WRB_SGE_CNT_SHIFT 3	/* bits 3 - 7 of dword 0 */
+#define MCC_WRB_SGE_CNT_MASK 0x1F	/* bits 3 - 7 of dword 0 */
+struct be_mcc_wrb {
+	u32 embedded;		/* dword 0 */
+	u32 payload_length;	/* dword 1 */
+	u32 tag0;		/* dword 2 */
+	u32 tag1;		/* dword 3 */
+	u32 rsvd;		/* dword 4 */
+	union {
+		u8 embedded_payload[236];	/* used by embedded cmds */
+		struct be_sge sgl[19];	/* used by non-embedded cmds */
+	} payload;
+};
+
+#define CQE_FLAGS_VALID_MASK (1 << 31)
+#define CQE_FLAGS_ASYNC_MASK (1 << 30)
+
+/* Completion Status */
+#define MCC_STATUS_SUCCESS 0x0
+
+#define CQE_STATUS_COMPL_MASK 0xFFFF
+#define CQE_STATUS_COMPL_SHIFT 0	/* bits 0 - 15 */
+#define CQE_STATUS_EXTD_MASK 0xFFFF
+#define CQE_STATUS_EXTD_SHIFT 0		/* bits 0 - 15 */
+
+struct be_mcc_compl {
+	u32 status;		/* dword 0 */
+	u32 tag0;		/* dword 1 */
+	u32 tag1;		/* dword 2 */
+	u32 flags;		/* dword 3 */
+};
+
+/********* Mailbox door bell *************/
+/**
+ * Used for driver communication with the FW.
+ * The software must write this register twice to post any command. First,
+ * it writes the register with hi=1 and the upper bits of the physical address
+ * for the MAILBOX structure. Software must poll the ready bit until this
+ * is acknowledged. Then, sotware writes the register with hi=0 with the lower
+ * bits in the address. It must poll the ready bit until the command is
+ * complete. Upon completion, the MAILBOX will contain a valid completion
+ * queue entry.
+ */
+#define MPU_MAILBOX_DB_OFFSET	0x160
+#define MPU_MAILBOX_DB_RDY_MASK	0x1	/* bit 0 */
+#define MPU_MAILBOX_DB_HI_MASK	0x2	/* bit 1 */
+
+/********** MPU semphore ******************/
+#define MPU_EP_SEMAPHORE_OFFSET 0xac
+#define EP_SEMAPHORE_POST_STAGE_MASK 0x0000FFFF
+#define EP_SEMAPHORE_POST_ERR_MASK 0x1
+#define EP_SEMAPHORE_POST_ERR_SHIFT 31
+
+/********** MCC door bell ************/
+#define DB_MCCQ_OFFSET 0x140
+#define DB_MCCQ_RING_ID_MASK 0x7FF		/* bits 0 - 10 */
+/* Number of entries posted */
+#define DB_MCCQ_NUM_POSTED_SHIFT 16		/* bits 16 - 29 */
+
+/* MPU semphore POST stage values */
+#define POST_STAGE_ARMFW_RDY		0xc000	/* FW is done with POST */
+
+/**
+ * When the async bit of mcc_compl is set, the last 4 bytes of
+ * mcc_compl is interpreted as follows:
+ */
+#define ASYNC_TRAILER_EVENT_CODE_SHIFT	8	/* bits 8 - 15 */
+#define ASYNC_TRAILER_EVENT_CODE_MASK	0xFF
+#define ASYNC_EVENT_CODE_LINK_STATE	0x1
+struct be_async_event_trailer {
+	u32 code;
+};
+
+enum {
+	ASYNC_EVENT_LINK_DOWN = 0x0,
+	ASYNC_EVENT_LINK_UP = 0x1
+};
+
+/**
+ * When the event code of an async trailer is link-state, the mcc_compl
+ * must be interpreted as follows
+ */
+struct be_async_event_link_state {
+	u8 physical_port;
+	u8 port_link_status;
+	u8 port_duplex;
+	u8 port_speed;
+	u8 port_fault;
+	u8 rsvd0[7];
+	struct be_async_event_trailer trailer;
+} __packed;
+
+struct be_mcc_mailbox {
+	struct be_mcc_wrb wrb;
+	struct be_mcc_compl compl;
+};
+
+/* Type of subsystems supported by FW */
+#define CMD_SUBSYSTEM_COMMON    0x1
+#define CMD_SUBSYSTEM_ISCSI     0x2
+#define CMD_SUBSYSTEM_ETH       0x3
+#define CMD_SUBSYSTEM_ISCSI_INI 0x6
+#define CMD_COMMON_TCP_UPLOAD   0x1
+
+/**
+ * List of common opcodes subsystem  CMD_SUBSYSTEM_COMMON
+ * These opcodes are unique for each subsystem defined above
+ */
+#define OPCODE_COMMON_CQ_CREATE				12
+#define OPCODE_COMMON_EQ_CREATE				13
+#define OPCODE_COMMON_MCC_CREATE        		21
+#define OPCODE_COMMON_GET_CNTL_ATTRIBUTES               32
+#define OPCODE_COMMON_GET_FW_VERSION			35
+#define OPCODE_COMMON_MODIFY_EQ_DELAY			41
+#define OPCODE_COMMON_FIRMWARE_CONFIG			42
+#define OPCODE_COMMON_MCC_DESTROY        		53
+#define OPCODE_COMMON_CQ_DESTROY        		54
+#define OPCODE_COMMON_EQ_DESTROY        		55
+#define OPCODE_COMMON_QUERY_FIRMWARE_CONFIG		58
+#define OPCODE_COMMON_FUNCTION_RESET			61
+
+/**
+ * LIST of opcodes that are common between Initiator and Target
+ * used by CMD_SUBSYSTEM_ISCSI
+ * These opcodes are unique for each subsystem defined above
+ */
+#define OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES		2
+#define OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES        3
+#define OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG		7
+#define OPCODE_COMMON_ISCSI_SET_FRAGNUM_BITS_FOR_SGL_CRA 61
+#define OPCODE_COMMON_ISCSI_DEFQ_CREATE                 64
+#define OPCODE_COMMON_ISCSI_DEFQ_DESTROY 		65
+#define OPCODE_COMMON_ISCSI_WRBQ_CREATE			66
+#define OPCODE_COMMON_ISCSI_WRBQ_DESTROY 		67
+
+struct be_cmd_req_hdr {
+	u8 opcode;		/* dword 0 */
+	u8 subsystem;		/* dword 0 */
+	u8 port_number;		/* dword 0 */
+	u8 domain;		/* dword 0 */
+	u32 timeout;		/* dword 1 */
+	u32 request_length;	/* dword 2 */
+	u32 rsvd;		/* dword 3 */
+};
+
+struct be_cmd_resp_hdr {
+	u32 info;		/* dword 0 */
+	u32 status;		/* dword 1 */
+	u32 response_length;	/* dword 2 */
+	u32 actual_resp_len;	/* dword 3 */
+};
+
+struct phys_addr {
+	u32 lo;
+	u32 hi;
+};
+
+/**************************
+ * BE Command definitions *
+ **************************/
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte - used to calculate offset/shift/mask of each field
+ */
+struct amap_eq_context {
+	u8 cidx[13];		/* dword 0 */
+	u8 rsvd0[3];		/* dword 0 */
+	u8 epidx[13];		/* dword 0 */
+	u8 valid;		/* dword 0 */
+	u8 rsvd1;		/* dword 0 */
+	u8 size;		/* dword 0 */
+	u8 pidx[13];		/* dword 1 */
+	u8 rsvd2[3];		/* dword 1 */
+	u8 pd[10];		/* dword 1 */
+	u8 count[3];		/* dword 1 */
+	u8 solevent;		/* dword 1 */
+	u8 stalled;		/* dword 1 */
+	u8 armed;		/* dword 1 */
+	u8 rsvd3[4];		/* dword 2 */
+	u8 func[8];		/* dword 2 */
+	u8 rsvd4;		/* dword 2 */
+	u8 delaymult[10];	/* dword 2 */
+	u8 rsvd5[2];		/* dword 2 */
+	u8 phase[2];		/* dword 2 */
+	u8 nodelay;		/* dword 2 */
+	u8 rsvd6[4];		/* dword 2 */
+	u8 rsvd7[32];		/* dword 3 */
+} __packed;
+
+struct be_cmd_req_eq_create {
+	struct be_cmd_req_hdr hdr;	/* dw[4] */
+	u16 num_pages;		/* sword */
+	u16 rsvd0;		/* sword */
+	u8 context[sizeof(struct amap_eq_context) / 8];	/* dw[4] */
+	struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_eq_create {
+	struct be_cmd_resp_hdr resp_hdr;
+	u16 eq_id;		/* sword */
+	u16 rsvd0;		/* sword */
+} __packed;
+
+struct mac_addr {
+	u16 size_of_struct;
+	u8 addr[ETH_ALEN];
+} __packed;
+
+struct be_cmd_req_mac_query {
+	struct be_cmd_req_hdr hdr;
+	u8 type;
+	u8 permanent;
+	u16 if_id;
+} __packed;
+
+struct be_cmd_resp_mac_query {
+	struct be_cmd_resp_hdr hdr;
+	struct mac_addr mac;
+};
+
+/******************** Create CQ ***************************/
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte - used to calculate offset/shift/mask of each field
+ */
+struct amap_cq_context {
+	u8 cidx[11];		/* dword 0 */
+	u8 rsvd0;		/* dword 0 */
+	u8 coalescwm[2];	/* dword 0 */
+	u8 nodelay;		/* dword 0 */
+	u8 epidx[11];		/* dword 0 */
+	u8 rsvd1;		/* dword 0 */
+	u8 count[2];		/* dword 0 */
+	u8 valid;		/* dword 0 */
+	u8 solevent;		/* dword 0 */
+	u8 eventable;		/* dword 0 */
+	u8 pidx[11];		/* dword 1 */
+	u8 rsvd2;		/* dword 1 */
+	u8 pd[10];		/* dword 1 */
+	u8 eqid[8];		/* dword 1 */
+	u8 stalled;		/* dword 1 */
+	u8 armed;		/* dword 1 */
+	u8 rsvd3[4];		/* dword 2 */
+	u8 func[8];		/* dword 2 */
+	u8 rsvd4[20];		/* dword 2 */
+	u8 rsvd5[32];		/* dword 3 */
+} __packed;
+
+struct be_cmd_req_cq_create {
+	struct be_cmd_req_hdr hdr;
+	u16 num_pages;
+	u16 rsvd0;
+	u8 context[sizeof(struct amap_cq_context) / 8];
+	struct phys_addr pages[4];
+} __packed;
+
+struct be_cmd_resp_cq_create {
+	struct be_cmd_resp_hdr hdr;
+	u16 cq_id;
+	u16 rsvd0;
+} __packed;
+
+/******************** Create MCCQ ***************************/
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte - used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_context {
+	u8 con_index[14];
+	u8 rsvd0[2];
+	u8 ring_size[4];
+	u8 fetch_wrb;
+	u8 fetch_r2t;
+	u8 cq_id[10];
+	u8 prod_index[14];
+	u8 fid[8];
+	u8 pdid[9];
+	u8 valid;
+	u8 rsvd1[32];
+	u8 rsvd2[32];
+} __packed;
+
+struct be_cmd_req_mcc_create {
+	struct be_cmd_req_hdr hdr;
+	u16 num_pages;
+	u16 rsvd0;
+	u8 context[sizeof(struct amap_mcc_context) / 8];
+	struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_mcc_create {
+	struct be_cmd_resp_hdr hdr;
+	u16 id;
+	u16 rsvd0;
+} __packed;
+
+/******************** Q Destroy  ***************************/
+/* Type of Queue to be destroyed */
+enum {
+	QTYPE_EQ = 1,
+	QTYPE_CQ,
+	QTYPE_MCCQ,
+	QTYPE_WRBQ,
+	QTYPE_DPDUQ,
+	QTYPE_SGL
+};
+
+struct be_cmd_req_q_destroy {
+	struct be_cmd_req_hdr hdr;
+	u16 id;
+	u16 bypass_flush;	/* valid only for rx q destroy */
+} __packed;
+
+struct macaddr {
+	u8 byte[ETH_ALEN];
+};
+
+struct be_cmd_req_mcast_mac_config {
+	struct be_cmd_req_hdr hdr;
+	u16 num_mac;
+	u8 promiscuous;
+	u8 interface_id;
+	struct macaddr mac[32];
+} __packed;
+
+static inline void *embedded_payload(struct be_mcc_wrb *wrb)
+{
+	return wrb->payload.embedded_payload;
+}
+
+static inline struct be_sge *nonembedded_sgl(struct be_mcc_wrb *wrb)
+{
+	return &wrb->payload.sgl[0];
+}
+
+/******************** Modify EQ Delay *******************/
+struct be_cmd_req_modify_eq_delay {
+	struct be_cmd_req_hdr hdr;
+	u32 num_eq;
+	struct {
+		u32 eq_id;
+		u32 phase;
+		u32 delay_multiplier;
+	} delay[8];
+} __packed;
+
+/******************** Get MAC ADDR *******************/
+
+#define ETH_ALEN	6
+
+
+struct be_cmd_req_get_mac_addr {
+	struct be_cmd_req_hdr hdr;
+	u32 nic_port_count;
+	u32 speed;
+	u32 max_speed;
+	u32 link_state;
+	u32 max_frame_size;
+	u16 size_of_structure;
+	u8 mac_address[ETH_ALEN];
+	u32 rsvd[23];
+};
+
+struct be_cmd_resp_get_mac_addr {
+	struct be_cmd_resp_hdr hdr;
+	u32 nic_port_count;
+	u32 speed;
+	u32 max_speed;
+	u32 link_state;
+	u32 max_frame_size;
+	u16 size_of_structure;
+	u8 mac_address[6];
+	u32 rsvd[23];
+};
+
+int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl,
+			  struct be_queue_info *eq, int eq_delay);
+
+int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl,
+			  struct be_queue_info *cq, struct be_queue_info *eq,
+			  bool sol_evts, bool no_delay,
+			  int num_cqe_dma_coalesce);
+
+int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+			  int type);
+int be_poll_mcc(struct be_ctrl_info *ctrl);
+unsigned char mgmt_check_supported_fw(struct be_ctrl_info *ctrl);
+int be_cmd_get_mac_addr(struct be_ctrl_info *ctrl, u8 *mac_addr);
+
+/*ISCSI Functuions */
+int be_cmd_fw_initialize(struct be_ctrl_info *ctrl);
+
+struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem);
+
+int be_mbox_notify(struct be_ctrl_info *ctrl);
+
+int be_cmd_create_default_pdu_queue(struct be_ctrl_info *ctrl,
+				    struct be_queue_info *cq,
+				    struct be_queue_info *dq, int length,
+				    int entry_size);
+
+int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl,
+				struct be_dma_mem *q_mem, u32 page_offset,
+				u32 num_pages);
+
+int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, struct be_dma_mem *q_mem,
+		       struct be_queue_info *wrbq);
+
+struct be_default_pdu_context {
+	u32 dw[4];
+} __packed;
+
+struct amap_be_default_pdu_context {
+	u8 dbuf_cindex[13];	/* dword 0 */
+	u8 rsvd0[3];		/* dword 0 */
+	u8 ring_size[4];	/* dword 0 */
+	u8 ring_state[4];	/* dword 0 */
+	u8 rsvd1[8];		/* dword 0 */
+	u8 dbuf_pindex[13];	/* dword 1 */
+	u8 rsvd2;		/* dword 1 */
+	u8 pci_func_id[8];	/* dword 1 */
+	u8 rx_pdid[9];		/* dword 1 */
+	u8 rx_pdid_valid;	/* dword 1 */
+	u8 default_buffer_size[16];	/* dword 2 */
+	u8 cq_id_recv[10];	/* dword 2 */
+	u8 rx_pdid_not_valid;	/* dword 2 */
+	u8 rsvd3[5];		/* dword 2 */
+	u8 rsvd4[32];		/* dword 3 */
+} __packed;
+
+struct be_defq_create_req {
+	struct be_cmd_req_hdr hdr;
+	u16 num_pages;
+	u8 ulp_num;
+	u8 rsvd0;
+	struct be_default_pdu_context context;
+	struct phys_addr pages[8];
+} __packed;
+
+struct be_defq_create_resp {
+	struct be_cmd_req_hdr hdr;
+	u16 id;
+	u16 rsvd0;
+} __packed;
+
+struct be_post_sgl_pages_req {
+	struct be_cmd_req_hdr hdr;
+	u16 num_pages;
+	u16 page_offset;
+	u32 rsvd0;
+	struct phys_addr pages[26];
+	u32 rsvd1;
+} __packed;
+
+struct be_wrbq_create_req {
+	struct be_cmd_req_hdr hdr;
+	u16 num_pages;
+	u8 ulp_num;
+	u8 rsvd0;
+	struct phys_addr pages[8];
+} __packed;
+
+struct be_wrbq_create_resp {
+	struct be_cmd_resp_hdr resp_hdr;
+	u16 cid;
+	u16 rsvd0;
+} __packed;
+
+#define SOL_CID_MASK		0x0000FFC0
+#define SOL_CODE_MASK		0x0000003F
+#define SOL_WRB_INDEX_MASK	0x00FF0000
+#define SOL_CMD_WND_MASK	0xFF000000
+#define SOL_RES_CNT_MASK	0x7FFFFFFF
+#define SOL_EXP_CMD_SN_MASK	0xFFFFFFFF
+#define SOL_HW_STS_MASK		0x000000FF
+#define SOL_STS_MASK		0x0000FF00
+#define SOL_RESP_MASK		0x00FF0000
+#define SOL_FLAGS_MASK		0x7F000000
+#define SOL_S_MASK		0x80000000
+
+struct sol_cqe {
+	u32 dw[4];
+};
+
+struct amap_sol_cqe {
+	u8 hw_sts[8];		/* dword 0 */
+	u8 i_sts[8];		/* dword 0 */
+	u8 i_resp[8];		/* dword 0 */
+	u8 i_flags[7];		/* dword 0 */
+	u8 s;			/* dword 0 */
+	u8 i_exp_cmd_sn[32];	/* dword 1 */
+	u8 code[6];		/* dword 2 */
+	u8 cid[10];		/* dword 2 */
+	u8 wrb_index[8];	/* dword 2 */
+	u8 i_cmd_wnd[8];	/* dword 2 */
+	u8 i_res_cnt[31];	/* dword 3 */
+	u8 valid;		/* dword 3 */
+} __packed;
+
+
+/**
+ * Post WRB Queue Doorbell Register used by the host Storage
+ * stack to notify the
+ * controller of a posted Work Request Block
+ */
+#define DB_WRB_POST_CID_MASK		0x3FF	/* bits 0 - 9 */
+#define DB_DEF_PDU_WRB_INDEX_MASK	0xFF	/* bits 0 - 9 */
+
+#define DB_DEF_PDU_WRB_INDEX_SHIFT	16
+#define DB_DEF_PDU_NUM_POSTED_SHIFT	24
+
+struct fragnum_bits_for_sgl_cra_in {
+	struct be_cmd_req_hdr hdr;
+	u32 num_bits;
+} __packed;
+
+struct iscsi_cleanup_req {
+	struct be_cmd_req_hdr hdr;
+	u16 chute;
+	u8 hdr_ring_id;
+	u8 data_ring_id;
+
+} __packed;
+
+struct eq_delay {
+	u32 eq_id;
+	u32 phase;
+	u32 delay_multiplier;
+} __packed;
+
+struct be_eq_delay_params_in {
+	struct be_cmd_req_hdr hdr;
+	u32 num_eq;
+	struct eq_delay delay[8];
+} __packed;
+
+struct ip_address_format {
+	u16 size_of_structure;
+	u8 reserved;
+	u8 ip_type;
+	u8 ip_address[16];
+	u32 rsvd0;
+} __packed;
+
+struct tcp_connect_and_offload_in {
+	struct be_cmd_req_hdr hdr;
+	struct ip_address_format ip_address;
+	u16 tcp_port;
+	u16 cid;
+	u16 cq_id;
+	u16 defq_id;
+	struct phys_addr dataout_template_pa;
+	u16 hdr_ring_id;
+	u16 data_ring_id;
+	u8 do_offload;
+	u8 rsvd0[3];
+} __packed;
+
+struct tcp_connect_and_offload_out {
+	struct be_cmd_resp_hdr hdr;
+	u32 connection_handle;
+	u16 cid;
+	u16 rsvd0;
+
+} __packed;
+
+struct be_mcc_wrb_context {
+	struct MCC_WRB *wrb;
+	int *users_final_status;
+} __packed;
+
+#define DB_DEF_PDU_RING_ID_MASK		0x3FF	/* bits 0 - 9 */
+#define DB_DEF_PDU_CQPROC_MASK		0x3FFF	/* bits 0 - 9 */
+#define DB_DEF_PDU_REARM_SHIFT		14
+#define DB_DEF_PDU_EVENT_SHIFT		15
+#define DB_DEF_PDU_CQPROC_SHIFT		16
+
+struct dmsg_cqe {
+	u32 dw[4];
+} __packed;
+
+struct tcp_upload_params_in {
+	struct be_cmd_req_hdr hdr;
+	u16 id;
+	u16 upload_type;
+	u32 reset_seq;
+} __packed;
+
+struct tcp_upload_params_out {
+	u32 dw[32];
+} __packed;
+
+union tcp_upload_params {
+	struct tcp_upload_params_in request;
+	struct tcp_upload_params_out response;
+} __packed;
+
+struct be_ulp_fw_cfg {
+	u32 ulp_mode;
+	u32 etx_base;
+	u32 etx_count;
+	u32 sq_base;
+	u32 sq_count;
+	u32 rq_base;
+	u32 rq_count;
+	u32 dq_base;
+	u32 dq_count;
+	u32 lro_base;
+	u32 lro_count;
+	u32 icd_base;
+	u32 icd_count;
+};
+
+struct be_fw_cfg {
+	struct be_cmd_req_hdr hdr;
+	u32 be_config_number;
+	u32 asic_revision;
+	u32 phys_port;
+	u32 function_mode;
+	struct be_ulp_fw_cfg ulp[2];
+	u32 function_caps;
+} __packed;
+
+#define CMD_ISCSI_COMMAND_INVALIDATE  1
+#define ISCSI_OPCODE_SCSI_DATA_OUT      5
+#define OPCODE_COMMON_ISCSI_TCP_CONNECT_AND_OFFLOAD 70
+#define OPCODE_ISCSI_INI_DRIVER_OFFLOAD_SESSION 41
+#define OPCODE_COMMON_MODIFY_EQ_DELAY	41
+#define OPCODE_COMMON_ISCSI_CLEANUP	59
+#define	OPCODE_COMMON_TCP_UPLOAD	56
+#define OPCODE_COMMON_ISCSI_ERROR_RECOVERY_INVALIDATE_COMMANDS 1
+/* --- CMD_ISCSI_INVALIDATE_CONNECTION_TYPE --- */
+#define CMD_ISCSI_CONNECTION_INVALIDATE 1
+#define CMD_ISCSI_CONNECTION_ISSUE_TCP_RST 2
+#define OPCODE_ISCSI_INI_DRIVER_INVALIDATE_CONNECTION 42
+
+#define INI_WR_CMD			1	/* Initiator write command */
+#define INI_TMF_CMD			2	/* Initiator TMF command */
+#define INI_NOPOUT_CMD			3	/* Initiator; Send a NOP-OUT */
+#define INI_RD_CMD			5	/* Initiator requesting to send
+						 * a read command
+						 */
+#define TGT_CTX_UPDT_CMD		7	/* Target context update */
+#define TGT_STS_CMD			8	/* Target R2T and other BHS
+						 * where only the status number
+						 * need to be updated
+						 */
+#define TGT_DATAIN_CMD			9	/* Target Data-Ins in response
+						 * to read command
+						 */
+#define TGT_SOS_PDU			10	/* Target:standalone status
+						 * response
+						 */
+#define TGT_DM_CMD			11	/* Indicates that the bhs
+						 *  preparedby
+						 * driver should not be touched
+						 */
+/* --- CMD_CHUTE_TYPE --- */
+#define CMD_CONNECTION_CHUTE_0		1
+#define CMD_CONNECTION_CHUTE_1		2
+#define CMD_CONNECTION_CHUTE_2		3
+
+#define EQ_MAJOR_CODE_COMPLETION	0
+
+#define CMD_ISCSI_SESSION_DEL_CFG_FROM_FLASH 0
+#define CMD_ISCSI_SESSION_SAVE_CFG_ON_FLASH 1
+
+/* --- CONNECTION_UPLOAD_PARAMS --- */
+/* These parameters are used to define the type of upload desired.  */
+#define CONNECTION_UPLOAD_GRACEFUL      1	/* Graceful upload  */
+#define CONNECTION_UPLOAD_ABORT_RESET   2	/* Abortive upload with
+						 * reset
+						 */
+#define CONNECTION_UPLOAD_ABORT		3	/* Abortive upload without
+						 * reset
+						 */
+#define CONNECTION_UPLOAD_ABORT_WITH_SEQ 4	/* Abortive upload with reset,
+						 * sequence number by driver  */
+
+/* Returns byte size of given field with a structure. */
+
+/* Returns the number of items in the field array. */
+#define BE_NUMBER_OF_FIELD(_type_, _field_)	\
+	(FIELD_SIZEOF(_type_, _field_)/sizeof((((_type_ *)0)->_field_[0])))\
+
+/**
+ * Different types of iSCSI completions to host driver for both initiator
+ * and taget mode
+ * of operation.
+ */
+#define SOL_CMD_COMPLETE		1	/* Solicited command completed
+						 * normally
+						 */
+#define SOL_CMD_KILLED_DATA_DIGEST_ERR  2	/* Solicited command got
+						 * invalidated internally due
+						 * to Data Digest error
+						 */
+#define CXN_KILLED_PDU_SIZE_EXCEEDS_DSL 3	/* Connection got invalidated
+						 * internally
+						 * due to a recieved PDU
+						 * size > DSL
+						 */
+#define CXN_KILLED_BURST_LEN_MISMATCH   4	/* Connection got invalidated
+						 * internally due ti received
+						 * PDU sequence size >
+						 * FBL/MBL.
+						 */
+#define CXN_KILLED_AHS_RCVD		5	/* Connection got invalidated
+						 * internally due to a recieved
+						 * PDU Hdr that has
+						 * AHS */
+#define CXN_KILLED_HDR_DIGEST_ERR	6	/* Connection got invalidated
+						 * internally due to Hdr Digest
+						 * error
+						 */
+#define CXN_KILLED_UNKNOWN_HDR		7	/* Connection got invalidated
+						 *  internally
+						 * due to a bad opcode in the
+						 * pdu hdr
+						 */
+#define CXN_KILLED_STALE_ITT_TTT_RCVD	8	/* Connection got invalidated
+						 * internally due to a recieved
+						 * ITT/TTT that does not belong
+						 * to this Connection
+						 */
+#define CXN_KILLED_INVALID_ITT_TTT_RCVD 9	/* Connection got invalidated
+						 * internally due to recieved
+						 * ITT/TTT value > Max
+						 * Supported ITTs/TTTs
+						 */
+#define CXN_KILLED_RST_RCVD		10	/* Connection got invalidated
+						 * internally due to an
+						 * incoming TCP RST
+						 */
+#define CXN_KILLED_TIMED_OUT		11	/* Connection got invalidated
+						 * internally due to timeout on
+						 * tcp segment 12 retransmit
+						 * attempts failed
+						 */
+#define CXN_KILLED_RST_SENT		12	/* Connection got invalidated
+						 * internally due to TCP RST
+						 * sent by the Tx side
+						 */
+#define CXN_KILLED_FIN_RCVD		13	/* Connection got invalidated
+						 * internally due to an
+						 * incoming TCP FIN.
+						 */
+#define CXN_KILLED_BAD_UNSOL_PDU_RCVD	14	/* Connection got invalidated
+						 * internally due to bad
+						 * unsolicited PDU Unsolicited
+						 * PDUs are PDUs with
+						 * ITT=0xffffffff
+						 */
+#define CXN_KILLED_BAD_WRB_INDEX_ERROR	15	/* Connection got invalidated
+						 * internally due to bad WRB
+						 * index.
+						 */
+#define CXN_KILLED_OVER_RUN_RESIDUAL	16	/* Command got invalidated
+						 * internally due to recived
+						 * command has residual
+						 * over run bytes.
+						 */
+#define CXN_KILLED_UNDER_RUN_RESIDUAL	17	/* Command got invalidated
+						 * internally due to recived
+						 * command has residual under
+						 * run bytes.
+						 */
+#define CMD_KILLED_INVALID_STATSN_RCVD	18	/* Command got invalidated
+						 * internally due to a recieved
+						 * PDU has an invalid StatusSN
+						 */
+#define CMD_KILLED_INVALID_R2T_RCVD	19	/* Command got invalidated
+						 * internally due to a recieved
+						 * an R2T with some invalid
+						 * fields in it
+						 */
+#define CMD_CXN_KILLED_LUN_INVALID	20	/* Command got invalidated
+						 * internally due to received
+						 * PDU has an invalid LUN.
+						 */
+#define CMD_CXN_KILLED_ICD_INVALID	21	/* Command got invalidated
+						 * internally due to the
+						 * corresponding ICD not in a
+						 * valid state
+						 */
+#define CMD_CXN_KILLED_ITT_INVALID	22	/* Command got invalidated due
+						 *  to received PDU has an
+						 *  invalid ITT.
+						 */
+#define CMD_CXN_KILLED_SEQ_OUTOFORDER	23	/* Command got invalidated due
+						 * to received sequence buffer
+						 * offset is out of order.
+						 */
+#define CMD_CXN_KILLED_INVALID_DATASN_RCVD 24	/* Command got invalidated
+						 * internally due to a
+						 * recieved PDU has an invalid
+						 * DataSN
+						 */
+#define CXN_INVALIDATE_NOTIFY		25	/* Connection invalidation
+						 * completion notify.
+						 */
+#define CXN_INVALIDATE_INDEX_NOTIFY	26	/* Connection invalidation
+						 * completion
+						 * with data PDU index.
+						 */
+#define CMD_INVALIDATED_NOTIFY		27	/* Command invalidation
+						 * completionnotifify.
+						 */
+#define UNSOL_HDR_NOTIFY		28	/* Unsolicited header notify.*/
+#define UNSOL_DATA_NOTIFY		29	/* Unsolicited data notify.*/
+#define UNSOL_DATA_DIGEST_ERROR_NOTIFY 	30	/* Unsolicited data digest
+						 * error notify.
+						 */
+#define DRIVERMSG_NOTIFY		31	/* TCP acknowledge based
+						 * notification.
+						 */
+#define CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN 32 /* Connection got invalidated
+						  * internally due to command
+						  * and data are not on same
+						  * connection.
+						  */
+#define SOL_CMD_KILLED_DIF_ERR		33	/* Solicited command got
+						 *  invalidated internally due
+						 *  to DIF error
+						 */
+#define CXN_KILLED_SYN_RCVD		34	/* Connection got invalidated
+						 * internally due to incoming
+						 * TCP SYN
+						 */
+#define CXN_KILLED_IMM_DATA_RCVD	35	/* Connection got invalidated
+						 * internally due to an
+						 * incoming Unsolicited PDU
+						 * that has immediate data on
+						 * the cxn
+						 */
+
+void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
+			bool embedded, u8 sge_cnt);
+
+void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
+			u8 subsystem, u8 opcode, int cmd_len);
+
+#endif /* !BEISCSI_CMDS_H */
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
new file mode 100644
index 000000000000..2fd25442cfaf
--- /dev/null
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -0,0 +1,638 @@
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+
+#include "be_iscsi.h"
+
+extern struct iscsi_transport beiscsi_iscsi_transport;
+
+/**
+ * beiscsi_session_create - creates a new iscsi session
+ * @cmds_max: max commands supported
+ * @qdepth: max queue depth supported
+ * @initial_cmdsn: initial iscsi CMDSN
+ */
+struct iscsi_cls_session *beiscsi_session_create(struct iscsi_endpoint *ep,
+						 u16 cmds_max,
+						 u16 qdepth,
+						 u32 initial_cmdsn)
+{
+	struct Scsi_Host *shost;
+	struct beiscsi_endpoint *beiscsi_ep;
+	struct iscsi_cls_session *cls_session;
+	struct beiscsi_hba *phba;
+	struct iscsi_session *sess;
+	struct beiscsi_session *beiscsi_sess;
+	struct beiscsi_io_task *io_task;
+
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_session_create\n");
+
+	if (!ep) {
+		SE_DEBUG(DBG_LVL_1, "beiscsi_session_create: invalid ep \n");
+		return NULL;
+	}
+	beiscsi_ep = ep->dd_data;
+	phba = beiscsi_ep->phba;
+	shost = phba->shost;
+	if (cmds_max > beiscsi_ep->phba->params.wrbs_per_cxn) {
+		shost_printk(KERN_ERR, shost, "Cannot handle %d cmds."
+			     "Max cmds per session supported is %d. Using %d. "
+			     "\n", cmds_max,
+			      beiscsi_ep->phba->params.wrbs_per_cxn,
+			      beiscsi_ep->phba->params.wrbs_per_cxn);
+		cmds_max = beiscsi_ep->phba->params.wrbs_per_cxn;
+	}
+
+	 cls_session = iscsi_session_setup(&beiscsi_iscsi_transport,
+					   shost, cmds_max,
+					   sizeof(*beiscsi_sess),
+					   sizeof(*io_task),
+					   initial_cmdsn, ISCSI_MAX_TARGET);
+	if (!cls_session)
+		return NULL;
+	sess = cls_session->dd_data;
+	beiscsi_sess = sess->dd_data;
+	beiscsi_sess->bhs_pool =  pci_pool_create("beiscsi_bhs_pool",
+						   phba->pcidev,
+						   sizeof(struct be_cmd_bhs),
+						   64, 0);
+	if (!beiscsi_sess->bhs_pool)
+		goto destroy_sess;
+
+	return cls_session;
+destroy_sess:
+	iscsi_session_teardown(cls_session);
+	return NULL;
+}
+
+/**
+ * beiscsi_session_destroy - destroys iscsi session
+ * @cls_session:	pointer to iscsi cls session
+ *
+ * Destroys iSCSI session instance and releases
+ * resources allocated for it.
+ */
+void beiscsi_session_destroy(struct iscsi_cls_session *cls_session)
+{
+	struct iscsi_session *sess = cls_session->dd_data;
+	struct beiscsi_session *beiscsi_sess = sess->dd_data;
+
+	pci_pool_destroy(beiscsi_sess->bhs_pool);
+	iscsi_session_teardown(cls_session);
+}
+
+/**
+ * beiscsi_conn_create - create an instance of iscsi connection
+ * @cls_session: ptr to iscsi_cls_session
+ * @cid: iscsi cid
+ */
+struct iscsi_cls_conn *
+beiscsi_conn_create(struct iscsi_cls_session *cls_session, u32 cid)
+{
+	struct beiscsi_hba *phba;
+	struct Scsi_Host *shost;
+	struct iscsi_cls_conn *cls_conn;
+	struct beiscsi_conn *beiscsi_conn;
+	struct iscsi_conn *conn;
+	struct iscsi_session *sess;
+	struct beiscsi_session *beiscsi_sess;
+
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_create ,cid"
+		 "from iscsi layer=%d\n", cid);
+	shost = iscsi_session_to_shost(cls_session);
+	phba = iscsi_host_priv(shost);
+
+	cls_conn = iscsi_conn_setup(cls_session, sizeof(*beiscsi_conn), cid);
+	if (!cls_conn)
+		return NULL;
+
+	conn = cls_conn->dd_data;
+	beiscsi_conn = conn->dd_data;
+	beiscsi_conn->ep = NULL;
+	beiscsi_conn->phba = phba;
+	beiscsi_conn->conn = conn;
+	sess = cls_session->dd_data;
+	beiscsi_sess = sess->dd_data;
+	beiscsi_conn->beiscsi_sess = beiscsi_sess;
+	return cls_conn;
+}
+
+/**
+ * beiscsi_bindconn_cid - Bind the beiscsi_conn with phba connection table
+ * @beiscsi_conn: The pointer to  beiscsi_conn structure
+ * @phba: The phba instance
+ * @cid: The cid to free
+ */
+static int beiscsi_bindconn_cid(struct beiscsi_hba *phba,
+				struct beiscsi_conn *beiscsi_conn,
+				unsigned int cid)
+{
+	if (phba->conn_table[cid]) {
+		SE_DEBUG(DBG_LVL_1,
+			 "Connection table already occupied. Detected clash\n");
+		return -EINVAL;
+	} else {
+		SE_DEBUG(DBG_LVL_8, "phba->conn_table[%d]=%p(beiscsi_conn) \n",
+			 cid, beiscsi_conn);
+		phba->conn_table[cid] = beiscsi_conn;
+	}
+	return 0;
+}
+
+/**
+ * beiscsi_conn_bind - Binds iscsi session/connection with TCP connection
+ * @cls_session: pointer to iscsi cls session
+ * @cls_conn: pointer to iscsi cls conn
+ * @transport_fd: EP handle(64 bit)
+ *
+ * This function binds the TCP Conn with iSCSI Connection and Session.
+ */
+int beiscsi_conn_bind(struct iscsi_cls_session *cls_session,
+		      struct iscsi_cls_conn *cls_conn,
+		      u64 transport_fd, int is_leading)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct Scsi_Host *shost =
+		(struct Scsi_Host *)iscsi_session_to_shost(cls_session);
+	struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
+	struct beiscsi_endpoint *beiscsi_ep;
+	struct iscsi_endpoint *ep;
+
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_bind\n");
+	ep = iscsi_lookup_endpoint(transport_fd);
+	if (!ep)
+		return -EINVAL;
+
+	beiscsi_ep = ep->dd_data;
+
+	if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
+		return -EINVAL;
+
+	if (beiscsi_ep->phba != phba) {
+		SE_DEBUG(DBG_LVL_8,
+			 "beiscsi_ep->hba=%p not equal to phba=%p \n",
+			 beiscsi_ep->phba, phba);
+		return -EEXIST;
+	}
+
+	beiscsi_conn->beiscsi_conn_cid = beiscsi_ep->ep_cid;
+	beiscsi_conn->ep = beiscsi_ep;
+	beiscsi_ep->conn = beiscsi_conn;
+	SE_DEBUG(DBG_LVL_8, "beiscsi_conn=%p conn=%p ep_cid=%d \n",
+		 beiscsi_conn, conn, beiscsi_ep->ep_cid);
+	return beiscsi_bindconn_cid(phba, beiscsi_conn, beiscsi_ep->ep_cid);
+}
+
+/**
+ * beiscsi_conn_get_param - get the iscsi parameter
+ * @cls_conn: pointer to iscsi cls conn
+ * @param: parameter type identifier
+ * @buf: buffer pointer
+ *
+ * returns iscsi parameter
+ */
+int beiscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+			   enum iscsi_param param, char *buf)
+{
+	struct beiscsi_endpoint *beiscsi_ep;
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	int len = 0;
+
+	beiscsi_ep = beiscsi_conn->ep;
+	if (!beiscsi_ep) {
+		SE_DEBUG(DBG_LVL_1,
+			 "In beiscsi_conn_get_param , no beiscsi_ep\n");
+		return -1;
+	}
+
+	switch (param) {
+	case ISCSI_PARAM_CONN_PORT:
+		len = sprintf(buf, "%hu\n", beiscsi_ep->dst_tcpport);
+		break;
+	case ISCSI_PARAM_CONN_ADDRESS:
+		if (beiscsi_ep->ip_type == BE2_IPV4)
+			len = sprintf(buf, "%pI4\n", &beiscsi_ep->dst_addr);
+		else
+			len = sprintf(buf, "%pI6\n", &beiscsi_ep->dst6_addr);
+		break;
+	default:
+		return iscsi_conn_get_param(cls_conn, param, buf);
+	}
+	return len;
+}
+
+int beiscsi_set_param(struct iscsi_cls_conn *cls_conn,
+		      enum iscsi_param param, char *buf, int buflen)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct iscsi_session *session = conn->session;
+	int ret;
+
+	ret = iscsi_set_param(cls_conn, param, buf, buflen);
+	if (ret)
+		return ret;
+	/*
+	 * If userspace tried to set the value to higher than we can
+	 * support override here.
+	 */
+	switch (param) {
+	case ISCSI_PARAM_FIRST_BURST:
+		if (session->first_burst > 8192)
+			session->first_burst = 8192;
+		break;
+	case ISCSI_PARAM_MAX_RECV_DLENGTH:
+		if (conn->max_recv_dlength > 65536)
+			conn->max_recv_dlength = 65536;
+		break;
+	case ISCSI_PARAM_MAX_BURST:
+		if (session->first_burst > 262144)
+			session->first_burst = 262144;
+		break;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+/**
+ * beiscsi_get_host_param - get the iscsi parameter
+ * @shost: pointer to scsi_host structure
+ * @param: parameter type identifier
+ * @buf: buffer pointer
+ *
+ * returns host parameter
+ */
+int beiscsi_get_host_param(struct Scsi_Host *shost,
+			   enum iscsi_host_param param, char *buf)
+{
+	struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
+	int len = 0;
+
+	switch (param) {
+	case ISCSI_HOST_PARAM_HWADDRESS:
+		be_cmd_get_mac_addr(&phba->ctrl, phba->mac_address);
+		len = sysfs_format_mac(buf, phba->mac_address, ETH_ALEN);
+		break;
+	default:
+		return iscsi_host_get_param(shost, param, buf);
+	}
+	return len;
+}
+
+/**
+ * beiscsi_conn_get_stats - get the iscsi stats
+ * @cls_conn: pointer to iscsi cls conn
+ * @stats: pointer to iscsi_stats structure
+ *
+ * returns iscsi stats
+ */
+void beiscsi_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+			    struct iscsi_stats *stats)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_get_stats\n");
+	stats->txdata_octets = conn->txdata_octets;
+	stats->rxdata_octets = conn->rxdata_octets;
+	stats->dataout_pdus = conn->dataout_pdus_cnt;
+	stats->scsirsp_pdus = conn->scsirsp_pdus_cnt;
+	stats->scsicmd_pdus = conn->scsicmd_pdus_cnt;
+	stats->datain_pdus = conn->datain_pdus_cnt;
+	stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt;
+	stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt;
+	stats->r2t_pdus = conn->r2t_pdus_cnt;
+	stats->digest_err = 0;
+	stats->timeout_err = 0;
+	stats->custom_length = 0;
+	strcpy(stats->custom[0].desc, "eh_abort_cnt");
+	stats->custom[0].value = conn->eh_abort_cnt;
+}
+
+/**
+ * beiscsi_set_params_for_offld - get the parameters for offload
+ * @beiscsi_conn: pointer to beiscsi_conn
+ * @params: pointer to offload_params structure
+ */
+static void  beiscsi_set_params_for_offld(struct beiscsi_conn *beiscsi_conn,
+					  struct beiscsi_offload_params *params)
+{
+	struct iscsi_conn *conn = beiscsi_conn->conn;
+	struct iscsi_session *session = conn->session;
+
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params, max_burst_length,
+		      params, session->max_burst);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params,
+		      max_send_data_segment_length, params,
+		      conn->max_xmit_dlength);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params, first_burst_length,
+		      params, session->first_burst);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params, erl, params,
+		      session->erl);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params, dde, params,
+		      conn->datadgst_en);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params, hde, params,
+		      conn->hdrdgst_en);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params, ir2t, params,
+		      session->initial_r2t_en);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params, imd, params,
+		      session->imm_data_en);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params, exp_statsn, params,
+		      (conn->exp_statsn - 1));
+}
+
+/**
+ * beiscsi_conn_start - offload of session to chip
+ * @cls_conn: pointer to beiscsi_conn
+ */
+int beiscsi_conn_start(struct iscsi_cls_conn *cls_conn)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct beiscsi_endpoint *beiscsi_ep;
+	struct beiscsi_offload_params params;
+	struct iscsi_session *session = conn->session;
+	struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
+	struct beiscsi_hba *phba = iscsi_host_priv(shost);
+
+	memset(&params, 0, sizeof(struct beiscsi_offload_params));
+	beiscsi_ep = beiscsi_conn->ep;
+	if (!beiscsi_ep)
+		SE_DEBUG(DBG_LVL_1, "In beiscsi_conn_start , no beiscsi_ep\n");
+
+	free_mgmt_sgl_handle(phba, beiscsi_conn->plogin_sgl_handle);
+	beiscsi_conn->login_in_progress = 0;
+	beiscsi_set_params_for_offld(beiscsi_conn, &params);
+	beiscsi_offload_connection(beiscsi_conn, &params);
+	iscsi_conn_start(cls_conn);
+	return 0;
+}
+
+/**
+ * beiscsi_get_cid - Allocate a cid
+ * @phba: The phba instance
+ */
+static int beiscsi_get_cid(struct beiscsi_hba *phba)
+{
+	unsigned short cid = 0xFFFF;
+
+	if (!phba->avlbl_cids)
+		return cid;
+
+	cid = phba->cid_array[phba->cid_alloc++];
+	if (phba->cid_alloc == phba->params.cxns_per_ctrl)
+		phba->cid_alloc = 0;
+	phba->avlbl_cids--;
+	return cid;
+}
+
+/**
+ * beiscsi_open_conn - Ask FW to open a TCP connection
+ * @ep:	endpoint to be used
+ * @src_addr: The source IP address
+ * @dst_addr: The Destination  IP address
+ *
+ * Asks the FW to open a TCP connection
+ */
+static int beiscsi_open_conn(struct iscsi_endpoint *ep,
+			     struct sockaddr *src_addr,
+			     struct sockaddr *dst_addr, int non_blocking)
+{
+	struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
+	struct beiscsi_hba *phba = beiscsi_ep->phba;
+	int ret = -1;
+
+	beiscsi_ep->ep_cid = beiscsi_get_cid(phba);
+	if (beiscsi_ep->ep_cid == 0xFFFF) {
+		SE_DEBUG(DBG_LVL_1, "No free cid available\n");
+		return ret;
+	}
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_open_conn, ep_cid=%d ",
+		 beiscsi_ep->ep_cid);
+	phba->ep_array[beiscsi_ep->ep_cid] = ep;
+	if (beiscsi_ep->ep_cid >
+	    (phba->fw_config.iscsi_cid_start + phba->params.cxns_per_ctrl)) {
+		SE_DEBUG(DBG_LVL_1, "Failed in allocate iscsi cid\n");
+		return ret;
+	}
+
+	beiscsi_ep->cid_vld = 0;
+	return mgmt_open_connection(phba, dst_addr, beiscsi_ep);
+}
+
+/**
+ * beiscsi_put_cid - Free the cid
+ * @phba: The phba for which the cid is being freed
+ * @cid: The cid to free
+ */
+static void beiscsi_put_cid(struct beiscsi_hba *phba, unsigned short cid)
+{
+	phba->avlbl_cids++;
+	phba->cid_array[phba->cid_free++] = cid;
+	if (phba->cid_free == phba->params.cxns_per_ctrl)
+		phba->cid_free = 0;
+}
+
+/**
+ * beiscsi_free_ep - free endpoint
+ * @ep:	pointer to iscsi endpoint structure
+ */
+static void beiscsi_free_ep(struct iscsi_endpoint *ep)
+{
+	struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
+	struct beiscsi_hba *phba = beiscsi_ep->phba;
+
+	beiscsi_put_cid(phba, beiscsi_ep->ep_cid);
+	beiscsi_ep->phba = NULL;
+	iscsi_destroy_endpoint(ep);
+}
+
+/**
+ * beiscsi_ep_connect - Ask chip to create TCP Conn
+ * @scsi_host: Pointer to scsi_host structure
+ * @dst_addr: The IP address of Target
+ * @non_blocking: blocking or non-blocking call
+ *
+ * This routines first asks chip to create a connection and then allocates an EP
+ */
+struct iscsi_endpoint *
+beiscsi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
+		   int non_blocking)
+{
+	struct beiscsi_hba *phba;
+	struct beiscsi_endpoint *beiscsi_ep;
+	struct iscsi_endpoint *ep;
+	int ret;
+
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_ep_connect \n");
+	if (shost)
+		phba = iscsi_host_priv(shost);
+	else {
+		ret = -ENXIO;
+		SE_DEBUG(DBG_LVL_1, "shost is NULL \n");
+		return ERR_PTR(ret);
+	}
+	ep = iscsi_create_endpoint(sizeof(struct beiscsi_endpoint));
+	if (!ep) {
+		ret = -ENOMEM;
+		return ERR_PTR(ret);
+	}
+
+	beiscsi_ep = ep->dd_data;
+	beiscsi_ep->phba = phba;
+
+	if (beiscsi_open_conn(ep, NULL, dst_addr, non_blocking)) {
+		SE_DEBUG(DBG_LVL_1, "Failed in allocate iscsi cid\n");
+		ret = -ENOMEM;
+		goto free_ep;
+	}
+
+	return ep;
+
+free_ep:
+	beiscsi_free_ep(ep);
+	return ERR_PTR(ret);
+}
+
+/**
+ * beiscsi_ep_poll - Poll to see if connection is established
+ * @ep:	endpoint to be used
+ * @timeout_ms: timeout specified in millisecs
+ *
+ * Poll to see if TCP connection established
+ */
+int beiscsi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
+{
+	struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
+
+	SE_DEBUG(DBG_LVL_8, "In  beiscsi_ep_poll\n");
+	if (beiscsi_ep->cid_vld == 1)
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * beiscsi_close_conn - Upload the  connection
+ * @ep: The iscsi endpoint
+ * @flag: The type of connection closure
+ */
+static int beiscsi_close_conn(struct iscsi_endpoint *ep, int flag)
+{
+	int ret = 0;
+	struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
+	struct beiscsi_hba *phba = beiscsi_ep->phba;
+
+	if (MGMT_STATUS_SUCCESS !=
+	    mgmt_upload_connection(phba, beiscsi_ep->ep_cid,
+		CONNECTION_UPLOAD_GRACEFUL)) {
+		SE_DEBUG(DBG_LVL_8, "upload failed for cid 0x%x",
+			 beiscsi_ep->ep_cid);
+		ret = -1;
+	}
+
+	return ret;
+}
+
+/**
+ * beiscsi_ep_disconnect - Tears down the TCP connection
+ * @ep:	endpoint to be used
+ *
+ * Tears down the TCP connection
+ */
+void beiscsi_ep_disconnect(struct iscsi_endpoint *ep)
+{
+	struct beiscsi_conn *beiscsi_conn;
+	struct beiscsi_endpoint *beiscsi_ep;
+	struct beiscsi_hba *phba;
+	int flag = 0;
+
+	beiscsi_ep = ep->dd_data;
+	phba = beiscsi_ep->phba;
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_ep_disconnect\n");
+
+	if (beiscsi_ep->conn) {
+		beiscsi_conn = beiscsi_ep->conn;
+		iscsi_suspend_queue(beiscsi_conn->conn);
+		beiscsi_close_conn(ep, flag);
+	}
+
+	beiscsi_free_ep(ep);
+}
+
+/**
+ * beiscsi_unbind_conn_to_cid - Unbind the beiscsi_conn from phba conn table
+ * @phba: The phba instance
+ * @cid: The cid to free
+ */
+static int beiscsi_unbind_conn_to_cid(struct beiscsi_hba *phba,
+				      unsigned int cid)
+{
+	if (phba->conn_table[cid])
+		phba->conn_table[cid] = NULL;
+	else {
+		SE_DEBUG(DBG_LVL_8, "Connection table Not occupied. \n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * beiscsi_conn_stop - Invalidate and stop the connection
+ * @cls_conn: pointer to get iscsi_conn
+ * @flag: The type of connection closure
+ */
+void beiscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct beiscsi_endpoint *beiscsi_ep;
+	struct iscsi_session *session = conn->session;
+	struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
+	struct beiscsi_hba *phba = iscsi_host_priv(shost);
+	unsigned int status;
+	unsigned short savecfg_flag = CMD_ISCSI_SESSION_SAVE_CFG_ON_FLASH;
+
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_stop\n");
+	beiscsi_ep = beiscsi_conn->ep;
+	if (!beiscsi_ep) {
+		SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_stop , no beiscsi_ep\n");
+		return;
+	}
+	status = mgmt_invalidate_connection(phba, beiscsi_ep,
+					    beiscsi_ep->ep_cid, 1,
+					    savecfg_flag);
+	if (status != MGMT_STATUS_SUCCESS) {
+		SE_DEBUG(DBG_LVL_1,
+			 "mgmt_invalidate_connection Failed for cid=%d \n",
+			 beiscsi_ep->ep_cid);
+	}
+	beiscsi_unbind_conn_to_cid(phba, beiscsi_ep->ep_cid);
+	iscsi_conn_stop(cls_conn, flag);
+}
diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h
new file mode 100644
index 000000000000..f92ffc5349fb
--- /dev/null
+++ b/drivers/scsi/be2iscsi/be_iscsi.h
@@ -0,0 +1,75 @@
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#ifndef _BE_ISCSI_
+#define _BE_ISCSI_
+
+#include "be_main.h"
+#include "be_mgmt.h"
+
+#define BE2_IPV4  0x1
+#define BE2_IPV6  0x10
+
+void beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
+				struct beiscsi_offload_params *params);
+
+void beiscsi_offload_iscsi(struct beiscsi_hba *phba, struct iscsi_conn *conn,
+			   struct beiscsi_conn *beiscsi_conn,
+			   unsigned int fw_handle);
+
+struct iscsi_cls_session *beiscsi_session_create(struct iscsi_endpoint *ep,
+						 uint16_t cmds_max,
+						 uint16_t qdepth,
+						 uint32_t initial_cmdsn);
+
+void beiscsi_session_destroy(struct iscsi_cls_session *cls_session);
+
+struct iscsi_cls_conn *beiscsi_conn_create(struct iscsi_cls_session
+					   *cls_session, uint32_t cid);
+
+int beiscsi_conn_bind(struct iscsi_cls_session *cls_session,
+		      struct iscsi_cls_conn *cls_conn,
+		      uint64_t transport_fd, int is_leading);
+
+int beiscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+			   enum iscsi_param param, char *buf);
+
+int beiscsi_get_host_param(struct Scsi_Host *shost,
+			   enum iscsi_host_param param, char *buf);
+
+int beiscsi_set_param(struct iscsi_cls_conn *cls_conn,
+		      enum iscsi_param param, char *buf, int buflen);
+
+int beiscsi_conn_start(struct iscsi_cls_conn *cls_conn);
+
+void beiscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag);
+
+struct iscsi_endpoint *beiscsi_ep_connect(struct Scsi_Host *shost,
+					  struct sockaddr *dst_addr,
+					  int non_blocking);
+
+int beiscsi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms);
+
+void beiscsi_ep_disconnect(struct iscsi_endpoint *ep);
+
+void beiscsi_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+			    struct iscsi_stats *stats);
+
+#endif
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
new file mode 100644
index 000000000000..4f1aca346e38
--- /dev/null
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -0,0 +1,3390 @@
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ *  ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/semaphore.h>
+
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+#include "be_main.h"
+#include "be_iscsi.h"
+#include "be_mgmt.h"
+
+static unsigned int be_iopoll_budget = 10;
+static unsigned int be_max_phys_size = 64;
+static unsigned int enable_msix;
+
+MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
+MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR);
+MODULE_AUTHOR("ServerEngines Corporation");
+MODULE_LICENSE("GPL");
+module_param(be_iopoll_budget, int, 0);
+module_param(enable_msix, int, 0);
+module_param(be_max_phys_size, uint, S_IRUGO);
+MODULE_PARM_DESC(be_max_phys_size, "Maximum Size (In Kilobytes) of physically"
+				   "contiguous memory that can be allocated."
+				   "Range is 16 - 128");
+
+static int beiscsi_slave_configure(struct scsi_device *sdev)
+{
+	blk_queue_max_segment_size(sdev->request_queue, 65536);
+	return 0;
+}
+
+static struct scsi_host_template beiscsi_sht = {
+	.module = THIS_MODULE,
+	.name = "ServerEngines 10Gbe open-iscsi Initiator Driver",
+	.proc_name = DRV_NAME,
+	.queuecommand = iscsi_queuecommand,
+	.eh_abort_handler = iscsi_eh_abort,
+	.change_queue_depth = iscsi_change_queue_depth,
+	.slave_configure = beiscsi_slave_configure,
+	.target_alloc = iscsi_target_alloc,
+	.eh_device_reset_handler = iscsi_eh_device_reset,
+	.eh_target_reset_handler = iscsi_eh_target_reset,
+	.sg_tablesize = BEISCSI_SGLIST_ELEMENTS,
+	.can_queue = BE2_IO_DEPTH,
+	.this_id = -1,
+	.max_sectors = BEISCSI_MAX_SECTORS,
+	.cmd_per_lun = BEISCSI_CMD_PER_LUN,
+	.use_clustering = ENABLE_CLUSTERING,
+};
+static struct scsi_transport_template *beiscsi_scsi_transport;
+
+/*------------------- PCI Driver operations and data ----------------- */
+static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = {
+	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
+
+static struct beiscsi_hba *beiscsi_hba_alloc(struct pci_dev *pcidev)
+{
+	struct beiscsi_hba *phba;
+	struct Scsi_Host *shost;
+
+	shost = iscsi_host_alloc(&beiscsi_sht, sizeof(*phba), 0);
+	if (!shost) {
+		dev_err(&pcidev->dev, "beiscsi_hba_alloc -"
+			"iscsi_host_alloc failed \n");
+		return NULL;
+	}
+	shost->dma_boundary = pcidev->dma_mask;
+	shost->max_id = BE2_MAX_SESSIONS;
+	shost->max_channel = 0;
+	shost->max_cmd_len = BEISCSI_MAX_CMD_LEN;
+	shost->max_lun = BEISCSI_NUM_MAX_LUN;
+	shost->transportt = beiscsi_scsi_transport;
+
+	phba = iscsi_host_priv(shost);
+	memset(phba, 0, sizeof(*phba));
+	phba->shost = shost;
+	phba->pcidev = pci_dev_get(pcidev);
+
+	if (iscsi_host_add(shost, &phba->pcidev->dev))
+		goto free_devices;
+	return phba;
+
+free_devices:
+	pci_dev_put(phba->pcidev);
+	iscsi_host_free(phba->shost);
+	return NULL;
+}
+
+static void beiscsi_unmap_pci_function(struct beiscsi_hba *phba)
+{
+	if (phba->csr_va) {
+		iounmap(phba->csr_va);
+		phba->csr_va = NULL;
+	}
+	if (phba->db_va) {
+		iounmap(phba->db_va);
+		phba->db_va = NULL;
+	}
+	if (phba->pci_va) {
+		iounmap(phba->pci_va);
+		phba->pci_va = NULL;
+	}
+}
+
+static int beiscsi_map_pci_bars(struct beiscsi_hba *phba,
+				struct pci_dev *pcidev)
+{
+	u8 __iomem *addr;
+
+	addr = ioremap_nocache(pci_resource_start(pcidev, 2),
+			       pci_resource_len(pcidev, 2));
+	if (addr == NULL)
+		return -ENOMEM;
+	phba->ctrl.csr = addr;
+	phba->csr_va = addr;
+	phba->csr_pa.u.a64.address = pci_resource_start(pcidev, 2);
+
+	addr = ioremap_nocache(pci_resource_start(pcidev, 4), 128 * 1024);
+	if (addr == NULL)
+		goto pci_map_err;
+	phba->ctrl.db = addr;
+	phba->db_va = addr;
+	phba->db_pa.u.a64.address =  pci_resource_start(pcidev, 4);
+
+	addr = ioremap_nocache(pci_resource_start(pcidev, 1),
+			       pci_resource_len(pcidev, 1));
+	if (addr == NULL)
+		goto pci_map_err;
+	phba->ctrl.pcicfg = addr;
+	phba->pci_va = addr;
+	phba->pci_pa.u.a64.address = pci_resource_start(pcidev, 1);
+	return 0;
+
+pci_map_err:
+	beiscsi_unmap_pci_function(phba);
+	return -ENOMEM;
+}
+
+static int beiscsi_enable_pci(struct pci_dev *pcidev)
+{
+	int ret;
+
+	ret = pci_enable_device(pcidev);
+	if (ret) {
+		dev_err(&pcidev->dev, "beiscsi_enable_pci - enable device "
+			"failed. Returning -ENODEV\n");
+		return ret;
+	}
+
+	if (pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64))) {
+		ret = pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32));
+		if (ret) {
+			dev_err(&pcidev->dev, "Could not set PCI DMA Mask\n");
+			pci_disable_device(pcidev);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static int be_ctrl_init(struct beiscsi_hba *phba, struct pci_dev *pdev)
+{
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct be_dma_mem *mbox_mem_alloc = &ctrl->mbox_mem_alloced;
+	struct be_dma_mem *mbox_mem_align = &ctrl->mbox_mem;
+	int status = 0;
+
+	ctrl->pdev = pdev;
+	status = beiscsi_map_pci_bars(phba, pdev);
+	if (status)
+		return status;
+
+	mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
+	mbox_mem_alloc->va = pci_alloc_consistent(pdev,
+						  mbox_mem_alloc->size,
+						  &mbox_mem_alloc->dma);
+	if (!mbox_mem_alloc->va) {
+		beiscsi_unmap_pci_function(phba);
+		status = -ENOMEM;
+		return status;
+	}
+
+	mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
+	mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
+	mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
+	memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
+	spin_lock_init(&ctrl->mbox_lock);
+	return status;
+}
+
+static void beiscsi_get_params(struct beiscsi_hba *phba)
+{
+	phba->params.ios_per_ctrl = BE2_IO_DEPTH;
+	phba->params.cxns_per_ctrl = BE2_MAX_SESSIONS;
+	phba->params.asyncpdus_per_ctrl = BE2_ASYNCPDUS;
+	phba->params.icds_per_ctrl = BE2_MAX_ICDS / 2;
+	phba->params.num_sge_per_io = BE2_SGE;
+	phba->params.defpdu_hdr_sz = BE2_DEFPDU_HDR_SZ;
+	phba->params.defpdu_data_sz = BE2_DEFPDU_DATA_SZ;
+	phba->params.eq_timer = 64;
+	phba->params.num_eq_entries =
+	    (((BE2_CMDS_PER_CXN * 2 + BE2_LOGOUTS + BE2_TMFS + BE2_ASYNCPDUS) /
+								512) + 1) * 512;
+	phba->params.num_eq_entries = (phba->params.num_eq_entries < 1024)
+				? 1024 : phba->params.num_eq_entries;
+	SE_DEBUG(DBG_LVL_8, "phba->params.num_eq_entries=%d \n",
+		 phba->params.num_eq_entries);
+	phba->params.num_cq_entries =
+	    (((BE2_CMDS_PER_CXN * 2 + BE2_LOGOUTS + BE2_TMFS + BE2_ASYNCPDUS) /
+								512) + 1) * 512;
+	SE_DEBUG(DBG_LVL_8,
+		"phba->params.num_cq_entries=%d BE2_CMDS_PER_CXN=%d"
+		"BE2_LOGOUTS=%d BE2_TMFS=%d BE2_ASYNCPDUS=%d \n",
+		phba->params.num_cq_entries, BE2_CMDS_PER_CXN,
+		BE2_LOGOUTS, BE2_TMFS, BE2_ASYNCPDUS);
+	phba->params.wrbs_per_cxn = 256;
+}
+
+static void hwi_ring_eq_db(struct beiscsi_hba *phba,
+			   unsigned int id, unsigned int clr_interrupt,
+			   unsigned int num_processed,
+			   unsigned char rearm, unsigned char event)
+{
+	u32 val = 0;
+	val |= id & DB_EQ_RING_ID_MASK;
+	if (rearm)
+		val |= 1 << DB_EQ_REARM_SHIFT;
+	if (clr_interrupt)
+		val |= 1 << DB_EQ_CLR_SHIFT;
+	if (event)
+		val |= 1 << DB_EQ_EVNT_SHIFT;
+	val |= num_processed << DB_EQ_NUM_POPPED_SHIFT;
+	iowrite32(val, phba->db_va + DB_EQ_OFFSET);
+}
+
+/**
+ * be_isr - The isr routine of the driver.
+ * @irq: Not used
+ * @dev_id: Pointer to host adapter structure
+ */
+static irqreturn_t be_isr(int irq, void *dev_id)
+{
+	struct beiscsi_hba *phba;
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_context_memory *phwi_context;
+	struct be_eq_entry *eqe = NULL;
+	struct be_queue_info *eq;
+	struct be_queue_info *cq;
+	unsigned long flags, index;
+	unsigned int num_eq_processed;
+	struct be_ctrl_info *ctrl;
+	int isr;
+
+	phba = dev_id;
+	if (!enable_msix) {
+		ctrl = &phba->ctrl;;
+		isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
+			       (PCI_FUNC(ctrl->pdev->devfn) * CEV_ISR_SIZE));
+		if (!isr)
+			return IRQ_NONE;
+	}
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	phwi_context = phwi_ctrlr->phwi_ctxt;
+	eq = &phwi_context->be_eq.q;
+	cq = &phwi_context->be_cq;
+	index = 0;
+	eqe = queue_tail_node(eq);
+	if (!eqe)
+		SE_DEBUG(DBG_LVL_1, "eqe is NULL\n");
+
+	num_eq_processed = 0;
+	if (blk_iopoll_enabled) {
+		while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+					& EQE_VALID_MASK) {
+			if (!blk_iopoll_sched_prep(&phba->iopoll))
+				blk_iopoll_sched(&phba->iopoll);
+
+			AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+			queue_tail_inc(eq);
+			eqe = queue_tail_node(eq);
+			num_eq_processed++;
+			SE_DEBUG(DBG_LVL_8, "Valid EQE\n");
+		}
+		if (num_eq_processed) {
+			hwi_ring_eq_db(phba, eq->id, 0,	num_eq_processed, 0, 1);
+			return IRQ_HANDLED;
+		} else
+			return IRQ_NONE;
+	} else {
+		while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+						& EQE_VALID_MASK) {
+
+			if (((eqe->dw[offsetof(struct amap_eq_entry,
+			     resource_id) / 32] &
+			     EQE_RESID_MASK) >> 16) != cq->id) {
+				spin_lock_irqsave(&phba->isr_lock, flags);
+				phba->todo_mcc_cq = 1;
+				spin_unlock_irqrestore(&phba->isr_lock, flags);
+			} else {
+				spin_lock_irqsave(&phba->isr_lock, flags);
+				phba->todo_cq = 1;
+				spin_unlock_irqrestore(&phba->isr_lock, flags);
+			}
+			AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+			queue_tail_inc(eq);
+			eqe = queue_tail_node(eq);
+			num_eq_processed++;
+		}
+		if (phba->todo_cq || phba->todo_mcc_cq)
+			queue_work(phba->wq, &phba->work_cqs);
+
+		if (num_eq_processed) {
+			hwi_ring_eq_db(phba, eq->id, 0, num_eq_processed, 1, 1);
+			return IRQ_HANDLED;
+		} else
+			return IRQ_NONE;
+	}
+}
+
+static int beiscsi_init_irqs(struct beiscsi_hba *phba)
+{
+	struct pci_dev *pcidev = phba->pcidev;
+	int ret;
+
+	ret = request_irq(pcidev->irq, be_isr, IRQF_SHARED, "beiscsi", phba);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_init_irqs-"
+			     "Failed to register irq\\n");
+		return ret;
+	}
+	return 0;
+}
+
+static void hwi_ring_cq_db(struct beiscsi_hba *phba,
+			   unsigned int id, unsigned int num_processed,
+			   unsigned char rearm, unsigned char event)
+{
+	u32 val = 0;
+	val |= id & DB_CQ_RING_ID_MASK;
+	if (rearm)
+		val |= 1 << DB_CQ_REARM_SHIFT;
+	val |= num_processed << DB_CQ_NUM_POPPED_SHIFT;
+	iowrite32(val, phba->db_va + DB_CQ_OFFSET);
+}
+
+/*
+ * async pdus include
+ * a. unsolicited NOP-In (target initiated NOP-In)
+ * b. Async Messages
+ * c. Reject PDU
+ * d. Login response
+ * These headers arrive unprocessed by the EP firmware and iSCSI layer
+ * process them
+ */
+static unsigned int
+beiscsi_process_async_pdu(struct beiscsi_conn *beiscsi_conn,
+			  struct beiscsi_hba *phba,
+			  unsigned short cid,
+			  struct pdu_base *ppdu,
+			  unsigned long pdu_len,
+			  void *pbuffer, unsigned long buf_len)
+{
+	struct iscsi_conn *conn = beiscsi_conn->conn;
+	struct iscsi_session *session = conn->session;
+
+	switch (ppdu->dw[offsetof(struct amap_pdu_base, opcode) / 32] &
+						PDUBASE_OPCODE_MASK) {
+	case ISCSI_OP_NOOP_IN:
+		pbuffer = NULL;
+		buf_len = 0;
+		break;
+	case ISCSI_OP_ASYNC_EVENT:
+		break;
+	case ISCSI_OP_REJECT:
+		WARN_ON(!pbuffer);
+		WARN_ON(!(buf_len == 48));
+		SE_DEBUG(DBG_LVL_1, "In ISCSI_OP_REJECT\n");
+		break;
+	case ISCSI_OP_LOGIN_RSP:
+		break;
+	default:
+		shost_printk(KERN_WARNING, phba->shost,
+			     "Unrecognized opcode 0x%x in async msg \n",
+			     (ppdu->
+			     dw[offsetof(struct amap_pdu_base, opcode) / 32]
+						& PDUBASE_OPCODE_MASK));
+		return 1;
+	}
+
+	spin_lock_bh(&session->lock);
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)ppdu, pbuffer, buf_len);
+	spin_unlock_bh(&session->lock);
+	return 0;
+}
+
+static struct sgl_handle *alloc_io_sgl_handle(struct beiscsi_hba *phba)
+{
+	struct sgl_handle *psgl_handle;
+
+	if (phba->io_sgl_hndl_avbl) {
+		SE_DEBUG(DBG_LVL_8,
+			 "In alloc_io_sgl_handle,io_sgl_alloc_index=%d \n",
+			 phba->io_sgl_alloc_index);
+		psgl_handle = phba->io_sgl_hndl_base[phba->
+						io_sgl_alloc_index];
+		phba->io_sgl_hndl_base[phba->io_sgl_alloc_index] = NULL;
+		phba->io_sgl_hndl_avbl--;
+		if (phba->io_sgl_alloc_index == (phba->params.ios_per_ctrl - 1))
+			phba->io_sgl_alloc_index = 0;
+		else
+			phba->io_sgl_alloc_index++;
+	} else
+		psgl_handle = NULL;
+	return psgl_handle;
+}
+
+static void
+free_io_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle)
+{
+	SE_DEBUG(DBG_LVL_8, "In free_,io_sgl_free_index=%d \n",
+		 phba->io_sgl_free_index);
+	if (phba->io_sgl_hndl_base[phba->io_sgl_free_index]) {
+		/*
+		 * this can happen if clean_task is called on a task that
+		 * failed in xmit_task or alloc_pdu.
+		 */
+		 SE_DEBUG(DBG_LVL_8,
+			 "Double Free in IO SGL io_sgl_free_index=%d,"
+			 "value there=%p \n", phba->io_sgl_free_index,
+			 phba->io_sgl_hndl_base[phba->io_sgl_free_index]);
+		return;
+	}
+	phba->io_sgl_hndl_base[phba->io_sgl_free_index] = psgl_handle;
+	phba->io_sgl_hndl_avbl++;
+	if (phba->io_sgl_free_index == (phba->params.ios_per_ctrl - 1))
+		phba->io_sgl_free_index = 0;
+	else
+		phba->io_sgl_free_index++;
+}
+
+/**
+ * alloc_wrb_handle - To allocate a wrb handle
+ * @phba: The hba pointer
+ * @cid: The cid to use for allocation
+ * @index: index allocation and wrb index
+ *
+ * This happens under session_lock until submission to chip
+ */
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
+				    int index)
+{
+	struct hwi_wrb_context *pwrb_context;
+	struct hwi_controller *phwi_ctrlr;
+	struct wrb_handle *pwrb_handle;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	pwrb_context = &phwi_ctrlr->wrb_context[cid];
+	pwrb_handle = pwrb_context->pwrb_handle_base[index];
+	pwrb_handle->wrb_index = index;
+	pwrb_handle->nxt_wrb_index = index;
+	return pwrb_handle;
+}
+
+/**
+ * free_wrb_handle - To free the wrb handle back to pool
+ * @phba: The hba pointer
+ * @pwrb_context: The context to free from
+ * @pwrb_handle: The wrb_handle to free
+ *
+ * This happens under session_lock until submission to chip
+ */
+static void
+free_wrb_handle(struct beiscsi_hba *phba, struct hwi_wrb_context *pwrb_context,
+		struct wrb_handle *pwrb_handle)
+{
+	SE_DEBUG(DBG_LVL_8,
+		 "FREE WRB: pwrb_handle=%p free_index=%d=0x%x"
+		 "wrb_handles_available=%d \n",
+		 pwrb_handle, pwrb_context->free_index,
+		 pwrb_context->free_index, pwrb_context->wrb_handles_available);
+}
+
+static struct sgl_handle *alloc_mgmt_sgl_handle(struct beiscsi_hba *phba)
+{
+	struct sgl_handle *psgl_handle;
+
+	if (phba->eh_sgl_hndl_avbl) {
+		psgl_handle = phba->eh_sgl_hndl_base[phba->eh_sgl_alloc_index];
+		phba->eh_sgl_hndl_base[phba->eh_sgl_alloc_index] = NULL;
+		SE_DEBUG(DBG_LVL_8, "mgmt_sgl_alloc_index=%d=0x%x \n",
+			 phba->eh_sgl_alloc_index, phba->eh_sgl_alloc_index);
+		phba->eh_sgl_hndl_avbl--;
+		if (phba->eh_sgl_alloc_index ==
+		    (phba->params.icds_per_ctrl - phba->params.ios_per_ctrl -
+		     1))
+			phba->eh_sgl_alloc_index = 0;
+		else
+			phba->eh_sgl_alloc_index++;
+	} else
+		psgl_handle = NULL;
+	return psgl_handle;
+}
+
+void
+free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle)
+{
+
+	if (phba->eh_sgl_hndl_base[phba->eh_sgl_free_index]) {
+		/*
+		 * this can happen if clean_task is called on a task that
+		 * failed in xmit_task or alloc_pdu.
+		 */
+		SE_DEBUG(DBG_LVL_8,
+			 "Double Free in eh SGL ,eh_sgl_free_index=%d \n",
+			 phba->eh_sgl_free_index);
+		return;
+	}
+	phba->eh_sgl_hndl_base[phba->eh_sgl_free_index] = psgl_handle;
+	phba->eh_sgl_hndl_avbl++;
+	if (phba->eh_sgl_free_index ==
+	    (phba->params.icds_per_ctrl - phba->params.ios_per_ctrl - 1))
+		phba->eh_sgl_free_index = 0;
+	else
+		phba->eh_sgl_free_index++;
+}
+
+static void
+be_complete_io(struct beiscsi_conn *beiscsi_conn,
+	       struct iscsi_task *task, struct sol_cqe *psol)
+{
+	struct beiscsi_io_task *io_task = task->dd_data;
+	struct be_status_bhs *sts_bhs =
+				(struct be_status_bhs *)io_task->cmd_bhs;
+	struct iscsi_conn *conn = beiscsi_conn->conn;
+	unsigned int sense_len;
+	unsigned char *sense;
+	u32 resid = 0, exp_cmdsn, max_cmdsn;
+	u8 rsp, status, flags;
+
+	exp_cmdsn = be32_to_cpu(psol->
+			dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
+			& SOL_EXP_CMD_SN_MASK);
+	max_cmdsn = be32_to_cpu((psol->
+			dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
+			& SOL_EXP_CMD_SN_MASK) +
+			((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
+				/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+	rsp = ((psol->dw[offsetof(struct amap_sol_cqe, i_resp) / 32]
+						& SOL_RESP_MASK) >> 16);
+	status = ((psol->dw[offsetof(struct amap_sol_cqe, i_sts) / 32]
+						& SOL_STS_MASK) >> 8);
+	flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
+					& SOL_FLAGS_MASK) >> 24) | 0x80;
+
+	task->sc->result = (DID_OK << 16) | status;
+	if (rsp != ISCSI_STATUS_CMD_COMPLETED) {
+		task->sc->result = DID_ERROR << 16;
+		goto unmap;
+	}
+
+	/* bidi not initially supported */
+	if (flags & (ISCSI_FLAG_CMD_UNDERFLOW | ISCSI_FLAG_CMD_OVERFLOW)) {
+		resid = (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) /
+				32] & SOL_RES_CNT_MASK);
+
+		if (!status && (flags & ISCSI_FLAG_CMD_OVERFLOW))
+			task->sc->result = DID_ERROR << 16;
+
+		if (flags & ISCSI_FLAG_CMD_UNDERFLOW) {
+			scsi_set_resid(task->sc, resid);
+			if (!status && (scsi_bufflen(task->sc) - resid <
+			    task->sc->underflow))
+				task->sc->result = DID_ERROR << 16;
+		}
+	}
+
+	if (status == SAM_STAT_CHECK_CONDITION) {
+		sense = sts_bhs->sense_info + sizeof(unsigned short);
+		sense_len =
+		    cpu_to_be16((unsigned short)(sts_bhs->sense_info[0]));
+		memcpy(task->sc->sense_buffer, sense,
+		       min_t(u16, sense_len, SCSI_SENSE_BUFFERSIZE));
+	}
+	if (io_task->cmd_bhs->iscsi_hdr.flags & ISCSI_FLAG_CMD_READ) {
+		if (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
+							& SOL_RES_CNT_MASK)
+			 conn->rxdata_octets += (psol->
+			      dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
+							& SOL_RES_CNT_MASK);
+	}
+unmap:
+	scsi_dma_unmap(io_task->scsi_cmnd);
+	iscsi_complete_scsi_task(task, exp_cmdsn, max_cmdsn);
+}
+
+static void
+be_complete_logout(struct beiscsi_conn *beiscsi_conn,
+		   struct iscsi_task *task, struct sol_cqe *psol)
+{
+	struct iscsi_logout_rsp *hdr;
+	struct iscsi_conn *conn = beiscsi_conn->conn;
+
+	hdr = (struct iscsi_logout_rsp *)task->hdr;
+	hdr->t2wait = 5;
+	hdr->t2retain = 0;
+	hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
+					& SOL_FLAGS_MASK) >> 24) | 0x80;
+	hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) /
+					32] & SOL_RESP_MASK);
+	hdr->exp_cmdsn = cpu_to_be32(psol->
+			dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
+					& SOL_EXP_CMD_SN_MASK);
+	hdr->max_cmdsn = be32_to_cpu((psol->
+			 dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
+					& SOL_EXP_CMD_SN_MASK) +
+			((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
+					/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+	hdr->hlength = 0;
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+}
+
+static void
+be_complete_tmf(struct beiscsi_conn *beiscsi_conn,
+		struct iscsi_task *task, struct sol_cqe *psol)
+{
+	struct iscsi_tm_rsp *hdr;
+	struct iscsi_conn *conn = beiscsi_conn->conn;
+
+	hdr = (struct iscsi_tm_rsp *)task->hdr;
+	hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
+					& SOL_FLAGS_MASK) >> 24) | 0x80;
+	hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) /
+					32] & SOL_RESP_MASK);
+	hdr->exp_cmdsn = cpu_to_be32(psol->dw[offsetof(struct amap_sol_cqe,
+				     i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK);
+	hdr->max_cmdsn = be32_to_cpu((psol->dw[offsetof(struct amap_sol_cqe,
+			i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK) +
+			((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
+			/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+}
+
+static void
+hwi_complete_drvr_msgs(struct beiscsi_conn *beiscsi_conn,
+		       struct beiscsi_hba *phba, struct sol_cqe *psol)
+{
+	struct hwi_wrb_context *pwrb_context;
+	struct wrb_handle *pwrb_handle;
+	struct hwi_controller *phwi_ctrlr;
+	struct iscsi_conn *conn = beiscsi_conn->conn;
+	struct iscsi_session *session = conn->session;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	pwrb_context = &phwi_ctrlr->wrb_context[((psol->
+				dw[offsetof(struct amap_sol_cqe, cid) / 32] &
+				SOL_CID_MASK) >> 6)];
+	pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
+				dw[offsetof(struct amap_sol_cqe, wrb_index) /
+				32] & SOL_WRB_INDEX_MASK) >> 16)];
+	spin_lock_bh(&session->lock);
+	free_wrb_handle(phba, pwrb_context, pwrb_handle);
+	spin_unlock_bh(&session->lock);
+}
+
+static void
+be_complete_nopin_resp(struct beiscsi_conn *beiscsi_conn,
+		       struct iscsi_task *task, struct sol_cqe *psol)
+{
+	struct iscsi_nopin *hdr;
+	struct iscsi_conn *conn = beiscsi_conn->conn;
+
+	hdr = (struct iscsi_nopin *)task->hdr;
+	hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
+			& SOL_FLAGS_MASK) >> 24) | 0x80;
+	hdr->exp_cmdsn = cpu_to_be32(psol->dw[offsetof(struct amap_sol_cqe,
+				     i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK);
+	hdr->max_cmdsn = be32_to_cpu((psol->dw[offsetof(struct amap_sol_cqe,
+			i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK) +
+			((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
+			/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+	hdr->opcode = ISCSI_OP_NOOP_IN;
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+}
+
+static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
+			     struct beiscsi_hba *phba, struct sol_cqe *psol)
+{
+	struct hwi_wrb_context *pwrb_context;
+	struct wrb_handle *pwrb_handle;
+	struct iscsi_wrb *pwrb = NULL;
+	struct hwi_controller *phwi_ctrlr;
+	struct iscsi_task *task;
+	struct beiscsi_io_task *io_task;
+	struct iscsi_conn *conn = beiscsi_conn->conn;
+	struct iscsi_session *session = conn->session;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+
+	pwrb_context = &phwi_ctrlr->
+		wrb_context[((psol->dw[offsetof(struct amap_sol_cqe, cid) / 32]
+		& SOL_CID_MASK) >> 6)];
+	pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
+				dw[offsetof(struct amap_sol_cqe, wrb_index) /
+				32] & SOL_WRB_INDEX_MASK) >> 16)];
+
+	task = pwrb_handle->pio_handle;
+	io_task = task->dd_data;
+	spin_lock_bh(&session->lock);
+	pwrb = pwrb_handle->pwrb;
+	switch ((pwrb->dw[offsetof(struct amap_iscsi_wrb, type) / 32] &
+		 WRB_TYPE_MASK) >> 28) {
+	case HWH_TYPE_IO:
+	case HWH_TYPE_IO_RD:
+		if ((task->hdr->opcode & ISCSI_OPCODE_MASK) ==
+		    ISCSI_OP_NOOP_OUT) {
+			be_complete_nopin_resp(beiscsi_conn, task, psol);
+		} else
+			be_complete_io(beiscsi_conn, task, psol);
+		break;
+
+	case HWH_TYPE_LOGOUT:
+		be_complete_logout(beiscsi_conn, task, psol);
+		break;
+
+	case HWH_TYPE_LOGIN:
+		SE_DEBUG(DBG_LVL_1,
+			 "\t\t No HWH_TYPE_LOGIN Expected in hwi_complete_cmd"
+			 "- Solicited path \n");
+		break;
+
+	case HWH_TYPE_TMF:
+		be_complete_tmf(beiscsi_conn, task, psol);
+		break;
+
+	case HWH_TYPE_NOP:
+		be_complete_nopin_resp(beiscsi_conn, task, psol);
+		break;
+
+	default:
+		shost_printk(KERN_WARNING, phba->shost,
+			    "wrb_index 0x%x CID 0x%x\n",
+			    ((psol->dw[offsetof(struct amap_iscsi_wrb, type) /
+					32] & SOL_WRB_INDEX_MASK) >> 16),
+			    ((psol->dw[offsetof(struct amap_sol_cqe, cid) / 32]
+					& SOL_CID_MASK) >> 6));
+		break;
+	}
+
+	spin_unlock_bh(&session->lock);
+}
+
+static struct list_head *hwi_get_async_busy_list(struct hwi_async_pdu_context
+					  *pasync_ctx, unsigned int is_header,
+					  unsigned int host_write_ptr)
+{
+	if (is_header)
+		return &pasync_ctx->async_entry[host_write_ptr].
+		    header_busy_list;
+	else
+		return &pasync_ctx->async_entry[host_write_ptr].data_busy_list;
+}
+
+static struct async_pdu_handle *
+hwi_get_async_handle(struct beiscsi_hba *phba,
+		     struct beiscsi_conn *beiscsi_conn,
+		     struct hwi_async_pdu_context *pasync_ctx,
+		     struct i_t_dpdu_cqe *pdpdu_cqe, unsigned int *pcq_index)
+{
+	struct be_bus_address phys_addr;
+	struct list_head *pbusy_list;
+	struct async_pdu_handle *pasync_handle = NULL;
+	int buffer_len = 0;
+	unsigned char buffer_index = -1;
+	unsigned char is_header = 0;
+
+	phys_addr.u.a32.address_lo =
+	    pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, db_addr_lo) / 32] -
+	    ((pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, dpl) / 32]
+						& PDUCQE_DPL_MASK) >> 16);
+	phys_addr.u.a32.address_hi =
+	    pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, db_addr_hi) / 32];
+
+	phys_addr.u.a64.address =
+			*((unsigned long long *)(&phys_addr.u.a64.address));
+
+	switch (pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, code) / 32]
+			& PDUCQE_CODE_MASK) {
+	case UNSOL_HDR_NOTIFY:
+		is_header = 1;
+
+		pbusy_list = hwi_get_async_busy_list(pasync_ctx, 1,
+			(pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
+			index) / 32] & PDUCQE_INDEX_MASK));
+
+		buffer_len = (unsigned int)(phys_addr.u.a64.address -
+				pasync_ctx->async_header.pa_base.u.a64.address);
+
+		buffer_index = buffer_len /
+				pasync_ctx->async_header.buffer_size;
+
+		break;
+	case UNSOL_DATA_NOTIFY:
+		pbusy_list = hwi_get_async_busy_list(pasync_ctx, 0, (pdpdu_cqe->
+					dw[offsetof(struct amap_i_t_dpdu_cqe,
+					index) / 32] & PDUCQE_INDEX_MASK));
+		buffer_len = (unsigned long)(phys_addr.u.a64.address -
+					pasync_ctx->async_data.pa_base.u.
+					a64.address);
+		buffer_index = buffer_len / pasync_ctx->async_data.buffer_size;
+		break;
+	default:
+		pbusy_list = NULL;
+		shost_printk(KERN_WARNING, phba->shost,
+			"Unexpected code=%d \n",
+			 pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
+					code) / 32] & PDUCQE_CODE_MASK);
+		return NULL;
+	}
+
+	WARN_ON(!(buffer_index <= pasync_ctx->async_data.num_entries));
+	WARN_ON(list_empty(pbusy_list));
+	list_for_each_entry(pasync_handle, pbusy_list, link) {
+		WARN_ON(pasync_handle->consumed);
+		if (pasync_handle->index == buffer_index)
+			break;
+	}
+
+	WARN_ON(!pasync_handle);
+
+	pasync_handle->cri = (unsigned short)beiscsi_conn->beiscsi_conn_cid;
+	pasync_handle->is_header = is_header;
+	pasync_handle->buffer_len = ((pdpdu_cqe->
+			dw[offsetof(struct amap_i_t_dpdu_cqe, dpl) / 32]
+			& PDUCQE_DPL_MASK) >> 16);
+
+	*pcq_index = (pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
+			index) / 32] & PDUCQE_INDEX_MASK);
+	return pasync_handle;
+}
+
+static unsigned int
+hwi_update_async_writables(struct hwi_async_pdu_context *pasync_ctx,
+			   unsigned int is_header, unsigned int cq_index)
+{
+	struct list_head *pbusy_list;
+	struct async_pdu_handle *pasync_handle;
+	unsigned int num_entries, writables = 0;
+	unsigned int *pep_read_ptr, *pwritables;
+
+
+	if (is_header) {
+		pep_read_ptr = &pasync_ctx->async_header.ep_read_ptr;
+		pwritables = &pasync_ctx->async_header.writables;
+		num_entries = pasync_ctx->async_header.num_entries;
+	} else {
+		pep_read_ptr = &pasync_ctx->async_data.ep_read_ptr;
+		pwritables = &pasync_ctx->async_data.writables;
+		num_entries = pasync_ctx->async_data.num_entries;
+	}
+
+	while ((*pep_read_ptr) != cq_index) {
+		(*pep_read_ptr)++;
+		*pep_read_ptr = (*pep_read_ptr) % num_entries;
+
+		pbusy_list = hwi_get_async_busy_list(pasync_ctx, is_header,
+						     *pep_read_ptr);
+		if (writables == 0)
+			WARN_ON(list_empty(pbusy_list));
+
+		if (!list_empty(pbusy_list)) {
+			pasync_handle = list_entry(pbusy_list->next,
+						   struct async_pdu_handle,
+						   link);
+			WARN_ON(!pasync_handle);
+			pasync_handle->consumed = 1;
+		}
+
+		writables++;
+	}
+
+	if (!writables) {
+		SE_DEBUG(DBG_LVL_1,
+			 "Duplicate notification received - index 0x%x!!\n",
+			 cq_index);
+		WARN_ON(1);
+	}
+
+	*pwritables = *pwritables + writables;
+	return 0;
+}
+
+static unsigned int hwi_free_async_msg(struct beiscsi_hba *phba,
+				       unsigned int cri)
+{
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_async_pdu_context *pasync_ctx;
+	struct async_pdu_handle *pasync_handle, *tmp_handle;
+	struct list_head *plist;
+	unsigned int i = 0;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+
+	plist  = &pasync_ctx->async_entry[cri].wait_queue.list;
+
+	list_for_each_entry_safe(pasync_handle, tmp_handle, plist, link) {
+		list_del(&pasync_handle->link);
+
+		if (i == 0) {
+			list_add_tail(&pasync_handle->link,
+				      &pasync_ctx->async_header.free_list);
+			pasync_ctx->async_header.free_entries++;
+			i++;
+		} else {
+			list_add_tail(&pasync_handle->link,
+				      &pasync_ctx->async_data.free_list);
+			pasync_ctx->async_data.free_entries++;
+			i++;
+		}
+	}
+
+	INIT_LIST_HEAD(&pasync_ctx->async_entry[cri].wait_queue.list);
+	pasync_ctx->async_entry[cri].wait_queue.hdr_received = 0;
+	pasync_ctx->async_entry[cri].wait_queue.bytes_received = 0;
+	return 0;
+}
+
+static struct phys_addr *
+hwi_get_ring_address(struct hwi_async_pdu_context *pasync_ctx,
+		     unsigned int is_header, unsigned int host_write_ptr)
+{
+	struct phys_addr *pasync_sge = NULL;
+
+	if (is_header)
+		pasync_sge = pasync_ctx->async_header.ring_base;
+	else
+		pasync_sge = pasync_ctx->async_data.ring_base;
+
+	return pasync_sge + host_write_ptr;
+}
+
+static void hwi_post_async_buffers(struct beiscsi_hba *phba,
+				   unsigned int is_header)
+{
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_async_pdu_context *pasync_ctx;
+	struct async_pdu_handle *pasync_handle;
+	struct list_head *pfree_link, *pbusy_list;
+	struct phys_addr *pasync_sge;
+	unsigned int ring_id, num_entries;
+	unsigned int host_write_num;
+	unsigned int writables;
+	unsigned int i = 0;
+	u32 doorbell = 0;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+
+	if (is_header) {
+		num_entries = pasync_ctx->async_header.num_entries;
+		writables = min(pasync_ctx->async_header.writables,
+				pasync_ctx->async_header.free_entries);
+		pfree_link = pasync_ctx->async_header.free_list.next;
+		host_write_num = pasync_ctx->async_header.host_write_ptr;
+		ring_id = phwi_ctrlr->default_pdu_hdr.id;
+	} else {
+		num_entries = pasync_ctx->async_data.num_entries;
+		writables = min(pasync_ctx->async_data.writables,
+				pasync_ctx->async_data.free_entries);
+		pfree_link = pasync_ctx->async_data.free_list.next;
+		host_write_num = pasync_ctx->async_data.host_write_ptr;
+		ring_id = phwi_ctrlr->default_pdu_data.id;
+	}
+
+	writables = (writables / 8) * 8;
+	if (writables) {
+		for (i = 0; i < writables; i++) {
+			pbusy_list =
+			    hwi_get_async_busy_list(pasync_ctx, is_header,
+						    host_write_num);
+			pasync_handle =
+			    list_entry(pfree_link, struct async_pdu_handle,
+								link);
+			WARN_ON(!pasync_handle);
+			pasync_handle->consumed = 0;
+
+			pfree_link = pfree_link->next;
+
+			pasync_sge = hwi_get_ring_address(pasync_ctx,
+						is_header, host_write_num);
+
+			pasync_sge->hi = pasync_handle->pa.u.a32.address_lo;
+			pasync_sge->lo = pasync_handle->pa.u.a32.address_hi;
+
+			list_move(&pasync_handle->link, pbusy_list);
+
+			host_write_num++;
+			host_write_num = host_write_num % num_entries;
+		}
+
+		if (is_header) {
+			pasync_ctx->async_header.host_write_ptr =
+							host_write_num;
+			pasync_ctx->async_header.free_entries -= writables;
+			pasync_ctx->async_header.writables -= writables;
+			pasync_ctx->async_header.busy_entries += writables;
+		} else {
+			pasync_ctx->async_data.host_write_ptr = host_write_num;
+			pasync_ctx->async_data.free_entries -= writables;
+			pasync_ctx->async_data.writables -= writables;
+			pasync_ctx->async_data.busy_entries += writables;
+		}
+
+		doorbell |= ring_id & DB_DEF_PDU_RING_ID_MASK;
+		doorbell |= 1 << DB_DEF_PDU_REARM_SHIFT;
+		doorbell |= 0 << DB_DEF_PDU_EVENT_SHIFT;
+		doorbell |= (writables & DB_DEF_PDU_CQPROC_MASK)
+					<< DB_DEF_PDU_CQPROC_SHIFT;
+
+		iowrite32(doorbell, phba->db_va + DB_RXULP0_OFFSET);
+	}
+}
+
+static void hwi_flush_default_pdu_buffer(struct beiscsi_hba *phba,
+					 struct beiscsi_conn *beiscsi_conn,
+					 struct i_t_dpdu_cqe *pdpdu_cqe)
+{
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_async_pdu_context *pasync_ctx;
+	struct async_pdu_handle *pasync_handle = NULL;
+	unsigned int cq_index = -1;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+
+	pasync_handle = hwi_get_async_handle(phba, beiscsi_conn, pasync_ctx,
+					     pdpdu_cqe, &cq_index);
+	BUG_ON(pasync_handle->is_header != 0);
+	if (pasync_handle->consumed == 0)
+		hwi_update_async_writables(pasync_ctx, pasync_handle->is_header,
+					   cq_index);
+
+	hwi_free_async_msg(phba, pasync_handle->cri);
+	hwi_post_async_buffers(phba, pasync_handle->is_header);
+}
+
+static unsigned int
+hwi_fwd_async_msg(struct beiscsi_conn *beiscsi_conn,
+		  struct beiscsi_hba *phba,
+		  struct hwi_async_pdu_context *pasync_ctx, unsigned short cri)
+{
+	struct list_head *plist;
+	struct async_pdu_handle *pasync_handle;
+	void *phdr = NULL;
+	unsigned int hdr_len = 0, buf_len = 0;
+	unsigned int status, index = 0, offset = 0;
+	void *pfirst_buffer = NULL;
+	unsigned int num_buf = 0;
+
+	plist = &pasync_ctx->async_entry[cri].wait_queue.list;
+
+	list_for_each_entry(pasync_handle, plist, link) {
+		if (index == 0) {
+			phdr = pasync_handle->pbuffer;
+			hdr_len = pasync_handle->buffer_len;
+		} else {
+			buf_len = pasync_handle->buffer_len;
+			if (!num_buf) {
+				pfirst_buffer = pasync_handle->pbuffer;
+				num_buf++;
+			}
+			memcpy(pfirst_buffer + offset,
+			       pasync_handle->pbuffer, buf_len);
+			offset = buf_len;
+		}
+		index++;
+	}
+
+	status = beiscsi_process_async_pdu(beiscsi_conn, phba,
+					   beiscsi_conn->beiscsi_conn_cid,
+					   phdr, hdr_len, pfirst_buffer,
+					   buf_len);
+
+	if (status == 0)
+		hwi_free_async_msg(phba, cri);
+	return 0;
+}
+
+static unsigned int
+hwi_gather_async_pdu(struct beiscsi_conn *beiscsi_conn,
+		     struct beiscsi_hba *phba,
+		     struct async_pdu_handle *pasync_handle)
+{
+	struct hwi_async_pdu_context *pasync_ctx;
+	struct hwi_controller *phwi_ctrlr;
+	unsigned int bytes_needed = 0, status = 0;
+	unsigned short cri = pasync_handle->cri;
+	struct pdu_base *ppdu;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+
+	list_del(&pasync_handle->link);
+	if (pasync_handle->is_header) {
+		pasync_ctx->async_header.busy_entries--;
+		if (pasync_ctx->async_entry[cri].wait_queue.hdr_received) {
+			hwi_free_async_msg(phba, cri);
+			BUG();
+		}
+
+		pasync_ctx->async_entry[cri].wait_queue.bytes_received = 0;
+		pasync_ctx->async_entry[cri].wait_queue.hdr_received = 1;
+		pasync_ctx->async_entry[cri].wait_queue.hdr_len =
+				(unsigned short)pasync_handle->buffer_len;
+		list_add_tail(&pasync_handle->link,
+			      &pasync_ctx->async_entry[cri].wait_queue.list);
+
+		ppdu = pasync_handle->pbuffer;
+		bytes_needed = ((((ppdu->dw[offsetof(struct amap_pdu_base,
+			data_len_hi) / 32] & PDUBASE_DATALENHI_MASK) << 8) &
+			0xFFFF0000) | ((be16_to_cpu((ppdu->
+			dw[offsetof(struct amap_pdu_base, data_len_lo) / 32]
+			& PDUBASE_DATALENLO_MASK) >> 16)) & 0x0000FFFF));
+
+		if (status == 0) {
+			pasync_ctx->async_entry[cri].wait_queue.bytes_needed =
+			    bytes_needed;
+
+			if (bytes_needed == 0)
+				status = hwi_fwd_async_msg(beiscsi_conn, phba,
+							   pasync_ctx, cri);
+		}
+	} else {
+		pasync_ctx->async_data.busy_entries--;
+		if (pasync_ctx->async_entry[cri].wait_queue.hdr_received) {
+			list_add_tail(&pasync_handle->link,
+				      &pasync_ctx->async_entry[cri].wait_queue.
+				      list);
+			pasync_ctx->async_entry[cri].wait_queue.
+				bytes_received +=
+				(unsigned short)pasync_handle->buffer_len;
+
+			if (pasync_ctx->async_entry[cri].wait_queue.
+			    bytes_received >=
+			    pasync_ctx->async_entry[cri].wait_queue.
+			    bytes_needed)
+				status = hwi_fwd_async_msg(beiscsi_conn, phba,
+							   pasync_ctx, cri);
+		}
+	}
+	return status;
+}
+
+static void hwi_process_default_pdu_ring(struct beiscsi_conn *beiscsi_conn,
+					 struct beiscsi_hba *phba,
+					 struct i_t_dpdu_cqe *pdpdu_cqe)
+{
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_async_pdu_context *pasync_ctx;
+	struct async_pdu_handle *pasync_handle = NULL;
+	unsigned int cq_index = -1;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+	pasync_handle = hwi_get_async_handle(phba, beiscsi_conn, pasync_ctx,
+					     pdpdu_cqe, &cq_index);
+
+	if (pasync_handle->consumed == 0)
+		hwi_update_async_writables(pasync_ctx, pasync_handle->is_header,
+					   cq_index);
+	hwi_gather_async_pdu(beiscsi_conn, phba, pasync_handle);
+	hwi_post_async_buffers(phba, pasync_handle->is_header);
+}
+
+static unsigned int beiscsi_process_cq(struct beiscsi_hba *phba)
+{
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_context_memory *phwi_context;
+	struct be_queue_info *cq;
+	struct sol_cqe *sol;
+	struct dmsg_cqe *dmsg;
+	unsigned int num_processed = 0;
+	unsigned int tot_nump = 0;
+	struct beiscsi_conn *beiscsi_conn;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	phwi_context = phwi_ctrlr->phwi_ctxt;
+	cq = &phwi_context->be_cq;
+	sol = queue_tail_node(cq);
+
+	while (sol->dw[offsetof(struct amap_sol_cqe, valid) / 32] &
+	       CQE_VALID_MASK) {
+		be_dws_le_to_cpu(sol, sizeof(struct sol_cqe));
+
+		beiscsi_conn = phba->conn_table[(u32) (sol->
+				 dw[offsetof(struct amap_sol_cqe, cid) / 32] &
+				 SOL_CID_MASK) >> 6];
+
+		if (!beiscsi_conn || !beiscsi_conn->ep) {
+			shost_printk(KERN_WARNING, phba->shost,
+				     "Connection table empty for cid = %d\n",
+				     (u32)(sol->dw[offsetof(struct amap_sol_cqe,
+				     cid) / 32] & SOL_CID_MASK) >> 6);
+			return 0;
+		}
+
+		if (num_processed >= 32) {
+			hwi_ring_cq_db(phba, phwi_context->be_cq.id,
+					num_processed, 0, 0);
+			tot_nump += num_processed;
+			num_processed = 0;
+		}
+
+		switch ((u32) sol->dw[offsetof(struct amap_sol_cqe, code) /
+			32] & CQE_CODE_MASK) {
+		case SOL_CMD_COMPLETE:
+			hwi_complete_cmd(beiscsi_conn, phba, sol);
+			break;
+		case DRIVERMSG_NOTIFY:
+			SE_DEBUG(DBG_LVL_8, "Received DRIVERMSG_NOTIFY \n");
+			dmsg = (struct dmsg_cqe *)sol;
+			hwi_complete_drvr_msgs(beiscsi_conn, phba, sol);
+			break;
+		case UNSOL_HDR_NOTIFY:
+		case UNSOL_DATA_NOTIFY:
+			SE_DEBUG(DBG_LVL_8, "Received UNSOL_HDR/DATA_NOTIFY\n");
+			hwi_process_default_pdu_ring(beiscsi_conn, phba,
+					     (struct i_t_dpdu_cqe *)sol);
+			break;
+		case CXN_INVALIDATE_INDEX_NOTIFY:
+		case CMD_INVALIDATED_NOTIFY:
+		case CXN_INVALIDATE_NOTIFY:
+			SE_DEBUG(DBG_LVL_1,
+				 "Ignoring CQ Error notification for cmd/cxn"
+				 "invalidate\n");
+			break;
+		case SOL_CMD_KILLED_DATA_DIGEST_ERR:
+		case CMD_KILLED_INVALID_STATSN_RCVD:
+		case CMD_KILLED_INVALID_R2T_RCVD:
+		case CMD_CXN_KILLED_LUN_INVALID:
+		case CMD_CXN_KILLED_ICD_INVALID:
+		case CMD_CXN_KILLED_ITT_INVALID:
+		case CMD_CXN_KILLED_SEQ_OUTOFORDER:
+		case CMD_CXN_KILLED_INVALID_DATASN_RCVD:
+			SE_DEBUG(DBG_LVL_1,
+				 "CQ Error notification for cmd.. "
+				 "code %d cid 0x%x\n",
+				 sol->dw[offsetof(struct amap_sol_cqe, code) /
+				 32] & CQE_CODE_MASK,
+				 (sol->dw[offsetof(struct amap_sol_cqe, cid) /
+				 32] & SOL_CID_MASK));
+			break;
+		case UNSOL_DATA_DIGEST_ERROR_NOTIFY:
+			SE_DEBUG(DBG_LVL_1,
+				 "Digest error on def pdu ring, dropping..\n");
+			hwi_flush_default_pdu_buffer(phba, beiscsi_conn,
+					     (struct i_t_dpdu_cqe *) sol);
+			break;
+		case CXN_KILLED_PDU_SIZE_EXCEEDS_DSL:
+		case CXN_KILLED_BURST_LEN_MISMATCH:
+		case CXN_KILLED_AHS_RCVD:
+		case CXN_KILLED_HDR_DIGEST_ERR:
+		case CXN_KILLED_UNKNOWN_HDR:
+		case CXN_KILLED_STALE_ITT_TTT_RCVD:
+		case CXN_KILLED_INVALID_ITT_TTT_RCVD:
+		case CXN_KILLED_TIMED_OUT:
+		case CXN_KILLED_FIN_RCVD:
+		case CXN_KILLED_BAD_UNSOL_PDU_RCVD:
+		case CXN_KILLED_BAD_WRB_INDEX_ERROR:
+		case CXN_KILLED_OVER_RUN_RESIDUAL:
+		case CXN_KILLED_UNDER_RUN_RESIDUAL:
+		case CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN:
+			SE_DEBUG(DBG_LVL_1, "CQ Error %d, resetting CID "
+				 "0x%x...\n",
+				 sol->dw[offsetof(struct amap_sol_cqe, code) /
+				 32] & CQE_CODE_MASK,
+				 sol->dw[offsetof(struct amap_sol_cqe, cid) /
+				 32] & CQE_CID_MASK);
+			iscsi_conn_failure(beiscsi_conn->conn,
+					   ISCSI_ERR_CONN_FAILED);
+			break;
+		case CXN_KILLED_RST_SENT:
+		case CXN_KILLED_RST_RCVD:
+			SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset received/sent "
+				 "on CID 0x%x...\n",
+				 sol->dw[offsetof(struct amap_sol_cqe, code) /
+				 32] & CQE_CODE_MASK,
+				 sol->dw[offsetof(struct amap_sol_cqe, cid) /
+				 32] & CQE_CID_MASK);
+			iscsi_conn_failure(beiscsi_conn->conn,
+					   ISCSI_ERR_CONN_FAILED);
+			break;
+		default:
+			SE_DEBUG(DBG_LVL_1, "CQ Error Invalid code= %d "
+				 "received on CID 0x%x...\n",
+				 sol->dw[offsetof(struct amap_sol_cqe, code) /
+				 32] & CQE_CODE_MASK,
+				 sol->dw[offsetof(struct amap_sol_cqe, cid) /
+				 32] & CQE_CID_MASK);
+			break;
+		}
+
+		AMAP_SET_BITS(struct amap_sol_cqe, valid, sol, 0);
+		queue_tail_inc(cq);
+		sol = queue_tail_node(cq);
+		num_processed++;
+	}
+
+	if (num_processed > 0) {
+		tot_nump += num_processed;
+		hwi_ring_cq_db(phba, phwi_context->be_cq.id, num_processed,
+			       1, 0);
+	}
+	return tot_nump;
+}
+
+static void beiscsi_process_all_cqs(struct work_struct *work)
+{
+	unsigned long flags;
+	struct beiscsi_hba *phba =
+	    container_of(work, struct beiscsi_hba, work_cqs);
+
+	if (phba->todo_mcc_cq) {
+		spin_lock_irqsave(&phba->isr_lock, flags);
+		phba->todo_mcc_cq = 0;
+		spin_unlock_irqrestore(&phba->isr_lock, flags);
+		SE_DEBUG(DBG_LVL_1, "MCC Interrupt Not expected \n");
+	}
+
+	if (phba->todo_cq) {
+		spin_lock_irqsave(&phba->isr_lock, flags);
+		phba->todo_cq = 0;
+		spin_unlock_irqrestore(&phba->isr_lock, flags);
+		beiscsi_process_cq(phba);
+	}
+}
+
+static int be_iopoll(struct blk_iopoll *iop, int budget)
+{
+	static unsigned int ret;
+	struct beiscsi_hba *phba;
+
+	phba = container_of(iop, struct beiscsi_hba, iopoll);
+
+	ret = beiscsi_process_cq(phba);
+	if (ret < budget) {
+		struct hwi_controller *phwi_ctrlr;
+		struct hwi_context_memory *phwi_context;
+
+		phwi_ctrlr = phba->phwi_ctrlr;
+		phwi_context = phwi_ctrlr->phwi_ctxt;
+		blk_iopoll_complete(iop);
+		hwi_ring_eq_db(phba, phwi_context->be_eq.q.id, 0,
+							0, 1, 1);
+	}
+	return ret;
+}
+
+static void
+hwi_write_sgl(struct iscsi_wrb *pwrb, struct scatterlist *sg,
+	      unsigned int num_sg, struct beiscsi_io_task *io_task)
+{
+	struct iscsi_sge *psgl;
+	unsigned short sg_len, index;
+	unsigned int sge_len = 0;
+	unsigned long long addr;
+	struct scatterlist *l_sg;
+	unsigned int offset;
+
+	AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_lo, pwrb,
+				      io_task->bhs_pa.u.a32.address_lo);
+	AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_hi, pwrb,
+				      io_task->bhs_pa.u.a32.address_hi);
+
+	l_sg = sg;
+	for (index = 0; (index < num_sg) && (index < 2); index++, sg_next(sg)) {
+		if (index == 0) {
+			sg_len = sg_dma_len(sg);
+			addr = (u64) sg_dma_address(sg);
+			AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_lo, pwrb,
+							(addr & 0xFFFFFFFF));
+			AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_hi, pwrb,
+							(addr >> 32));
+			AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_len, pwrb,
+							sg_len);
+			sge_len = sg_len;
+			AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb,
+							1);
+		} else {
+			AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb,
+							0);
+			AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_r2t_offset,
+							pwrb, sge_len);
+			sg_len = sg_dma_len(sg);
+			addr = (u64) sg_dma_address(sg);
+			AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_addr_lo, pwrb,
+							(addr & 0xFFFFFFFF));
+			AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_addr_hi, pwrb,
+							(addr >> 32));
+			AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_len, pwrb,
+							sg_len);
+		}
+	}
+	psgl = (struct iscsi_sge *)io_task->psgl_handle->pfrag;
+	memset(psgl, 0, sizeof(*psgl) * BE2_SGE);
+
+	AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, io_task->bhs_len - 2);
+
+	AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+			io_task->bhs_pa.u.a32.address_hi);
+	AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+			io_task->bhs_pa.u.a32.address_lo);
+
+	if (num_sg == 2)
+		AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_last, pwrb, 1);
+	sg = l_sg;
+	psgl++;
+	psgl++;
+	offset = 0;
+	for (index = 0; index < num_sg; index++, sg_next(sg), psgl++) {
+		sg_len = sg_dma_len(sg);
+		addr = (u64) sg_dma_address(sg);
+		AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+						(addr & 0xFFFFFFFF));
+		AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+						(addr >> 32));
+		AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, sg_len);
+		AMAP_SET_BITS(struct amap_iscsi_sge, sge_offset, psgl, offset);
+		AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 0);
+		offset += sg_len;
+	}
+	psgl--;
+	AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 1);
+}
+
+static void hwi_write_buffer(struct iscsi_wrb *pwrb, struct iscsi_task *task)
+{
+	struct iscsi_sge *psgl;
+	unsigned long long addr;
+	struct beiscsi_io_task *io_task = task->dd_data;
+	struct beiscsi_conn *beiscsi_conn = io_task->conn;
+	struct beiscsi_hba *phba = beiscsi_conn->phba;
+
+	io_task->bhs_len = sizeof(struct be_nonio_bhs) - 2;
+	AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_lo, pwrb,
+				io_task->bhs_pa.u.a32.address_lo);
+	AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_hi, pwrb,
+				io_task->bhs_pa.u.a32.address_hi);
+
+	if (task->data) {
+		if (task->data_count) {
+			AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
+			addr = (u64) pci_map_single(phba->pcidev,
+						    task->data,
+						    task->data_count, 1);
+		} else {
+			AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
+			addr = 0;
+		}
+		AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_lo, pwrb,
+						(addr & 0xFFFFFFFF));
+		AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_hi, pwrb,
+						(addr >> 32));
+		AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_len, pwrb,
+						task->data_count);
+
+		AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb, 1);
+	} else {
+		AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
+		addr = 0;
+	}
+
+	psgl = (struct iscsi_sge *)io_task->psgl_handle->pfrag;
+
+	AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, io_task->bhs_len);
+
+	AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+		      io_task->bhs_pa.u.a32.address_hi);
+	AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+		      io_task->bhs_pa.u.a32.address_lo);
+	if (task->data) {
+		psgl++;
+		AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl, 0);
+		AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl, 0);
+		AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, 0);
+		AMAP_SET_BITS(struct amap_iscsi_sge, sge_offset, psgl, 0);
+		AMAP_SET_BITS(struct amap_iscsi_sge, rsvd0, psgl, 0);
+		AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 0);
+
+		psgl++;
+		if (task->data) {
+			AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+						(addr & 0xFFFFFFFF));
+			AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+						(addr >> 32));
+		}
+		AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, 0x106);
+	}
+	AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 1);
+}
+
+static void beiscsi_find_mem_req(struct beiscsi_hba *phba)
+{
+	unsigned int num_cq_pages, num_eq_pages, num_async_pdu_buf_pages;
+	unsigned int num_async_pdu_data_pages, wrb_sz_per_cxn;
+	unsigned int num_async_pdu_buf_sgl_pages, num_async_pdu_data_sgl_pages;
+
+	num_cq_pages = PAGES_REQUIRED(phba->params.num_cq_entries * \
+				      sizeof(struct sol_cqe));
+	num_eq_pages = PAGES_REQUIRED(phba->params.num_eq_entries * \
+				      sizeof(struct be_eq_entry));
+	num_async_pdu_buf_pages =
+			PAGES_REQUIRED(phba->params.asyncpdus_per_ctrl * \
+				       phba->params.defpdu_hdr_sz);
+	num_async_pdu_buf_sgl_pages =
+			PAGES_REQUIRED(phba->params.asyncpdus_per_ctrl * \
+				       sizeof(struct phys_addr));
+	num_async_pdu_data_pages =
+			PAGES_REQUIRED(phba->params.asyncpdus_per_ctrl * \
+				       phba->params.defpdu_data_sz);
+	num_async_pdu_data_sgl_pages =
+			PAGES_REQUIRED(phba->params.asyncpdus_per_ctrl * \
+				       sizeof(struct phys_addr));
+
+	phba->params.hwi_ws_sz = sizeof(struct hwi_controller);
+
+	phba->mem_req[ISCSI_MEM_GLOBAL_HEADER] = 2 *
+						 BE_ISCSI_PDU_HEADER_SIZE;
+	phba->mem_req[HWI_MEM_ADDN_CONTEXT] =
+					    sizeof(struct hwi_context_memory);
+
+	phba->mem_req[HWI_MEM_CQ] = num_cq_pages * PAGE_SIZE;
+	phba->mem_req[HWI_MEM_EQ] = num_eq_pages * PAGE_SIZE;
+
+	phba->mem_req[HWI_MEM_WRB] = sizeof(struct iscsi_wrb)
+	    * (phba->params.wrbs_per_cxn)
+	    * phba->params.cxns_per_ctrl;
+	wrb_sz_per_cxn =  sizeof(struct wrb_handle) *
+				 (phba->params.wrbs_per_cxn);
+	phba->mem_req[HWI_MEM_WRBH] = roundup_pow_of_two((wrb_sz_per_cxn) *
+				phba->params.cxns_per_ctrl);
+
+	phba->mem_req[HWI_MEM_SGLH] = sizeof(struct sgl_handle) *
+		phba->params.icds_per_ctrl;
+	phba->mem_req[HWI_MEM_SGE] = sizeof(struct iscsi_sge) *
+		phba->params.num_sge_per_io * phba->params.icds_per_ctrl;
+
+	phba->mem_req[HWI_MEM_ASYNC_HEADER_BUF] =
+		num_async_pdu_buf_pages * PAGE_SIZE;
+	phba->mem_req[HWI_MEM_ASYNC_DATA_BUF] =
+		num_async_pdu_data_pages * PAGE_SIZE;
+	phba->mem_req[HWI_MEM_ASYNC_HEADER_RING] =
+		num_async_pdu_buf_sgl_pages * PAGE_SIZE;
+	phba->mem_req[HWI_MEM_ASYNC_DATA_RING] =
+		num_async_pdu_data_sgl_pages * PAGE_SIZE;
+	phba->mem_req[HWI_MEM_ASYNC_HEADER_HANDLE] =
+		phba->params.asyncpdus_per_ctrl *
+		sizeof(struct async_pdu_handle);
+	phba->mem_req[HWI_MEM_ASYNC_DATA_HANDLE] =
+		phba->params.asyncpdus_per_ctrl *
+		sizeof(struct async_pdu_handle);
+	phba->mem_req[HWI_MEM_ASYNC_PDU_CONTEXT] =
+		sizeof(struct hwi_async_pdu_context) +
+		(phba->params.cxns_per_ctrl * sizeof(struct hwi_async_entry));
+}
+
+static int beiscsi_alloc_mem(struct beiscsi_hba *phba)
+{
+	struct be_mem_descriptor *mem_descr;
+	dma_addr_t bus_add;
+	struct mem_array *mem_arr, *mem_arr_orig;
+	unsigned int i, j, alloc_size, curr_alloc_size;
+
+	phba->phwi_ctrlr = kmalloc(phba->params.hwi_ws_sz, GFP_KERNEL);
+	if (!phba->phwi_ctrlr)
+		return -ENOMEM;
+
+	phba->init_mem = kcalloc(SE_MEM_MAX, sizeof(*mem_descr),
+				 GFP_KERNEL);
+	if (!phba->init_mem) {
+		kfree(phba->phwi_ctrlr);
+		return -ENOMEM;
+	}
+
+	mem_arr_orig = kmalloc(sizeof(*mem_arr_orig) * BEISCSI_MAX_FRAGS_INIT,
+			       GFP_KERNEL);
+	if (!mem_arr_orig) {
+		kfree(phba->init_mem);
+		kfree(phba->phwi_ctrlr);
+		return -ENOMEM;
+	}
+
+	mem_descr = phba->init_mem;
+	for (i = 0; i < SE_MEM_MAX; i++) {
+		j = 0;
+		mem_arr = mem_arr_orig;
+		alloc_size = phba->mem_req[i];
+		memset(mem_arr, 0, sizeof(struct mem_array) *
+		       BEISCSI_MAX_FRAGS_INIT);
+		curr_alloc_size = min(be_max_phys_size * 1024, alloc_size);
+		do {
+			mem_arr->virtual_address = pci_alloc_consistent(
+							phba->pcidev,
+							curr_alloc_size,
+							&bus_add);
+			if (!mem_arr->virtual_address) {
+				if (curr_alloc_size <= BE_MIN_MEM_SIZE)
+					goto free_mem;
+				if (curr_alloc_size -
+					rounddown_pow_of_two(curr_alloc_size))
+					curr_alloc_size = rounddown_pow_of_two
+							     (curr_alloc_size);
+				else
+					curr_alloc_size = curr_alloc_size / 2;
+			} else {
+				mem_arr->bus_address.u.
+				    a64.address = (__u64) bus_add;
+				mem_arr->size = curr_alloc_size;
+				alloc_size -= curr_alloc_size;
+				curr_alloc_size = min(be_max_phys_size *
+						      1024, alloc_size);
+				j++;
+				mem_arr++;
+			}
+		} while (alloc_size);
+		mem_descr->num_elements = j;
+		mem_descr->size_in_bytes = phba->mem_req[i];
+		mem_descr->mem_array = kmalloc(sizeof(*mem_arr) * j,
+					       GFP_KERNEL);
+		if (!mem_descr->mem_array)
+			goto free_mem;
+
+		memcpy(mem_descr->mem_array, mem_arr_orig,
+		       sizeof(struct mem_array) * j);
+		mem_descr++;
+	}
+	kfree(mem_arr_orig);
+	return 0;
+free_mem:
+	mem_descr->num_elements = j;
+	while ((i) || (j)) {
+		for (j = mem_descr->num_elements; j > 0; j--) {
+			pci_free_consistent(phba->pcidev,
+					    mem_descr->mem_array[j - 1].size,
+					    mem_descr->mem_array[j - 1].
+					    virtual_address,
+					    mem_descr->mem_array[j - 1].
+					    bus_address.u.a64.address);
+		}
+		if (i) {
+			i--;
+			kfree(mem_descr->mem_array);
+			mem_descr--;
+		}
+	}
+	kfree(mem_arr_orig);
+	kfree(phba->init_mem);
+	kfree(phba->phwi_ctrlr);
+	return -ENOMEM;
+}
+
+static int beiscsi_get_memory(struct beiscsi_hba *phba)
+{
+	beiscsi_find_mem_req(phba);
+	return beiscsi_alloc_mem(phba);
+}
+
+static void iscsi_init_global_templates(struct beiscsi_hba *phba)
+{
+	struct pdu_data_out *pdata_out;
+	struct pdu_nop_out *pnop_out;
+	struct be_mem_descriptor *mem_descr;
+
+	mem_descr = phba->init_mem;
+	mem_descr += ISCSI_MEM_GLOBAL_HEADER;
+	pdata_out =
+	    (struct pdu_data_out *)mem_descr->mem_array[0].virtual_address;
+	memset(pdata_out, 0, BE_ISCSI_PDU_HEADER_SIZE);
+
+	AMAP_SET_BITS(struct amap_pdu_data_out, opcode, pdata_out,
+		      IIOC_SCSI_DATA);
+
+	pnop_out =
+	    (struct pdu_nop_out *)((unsigned char *)mem_descr->mem_array[0].
+				   virtual_address + BE_ISCSI_PDU_HEADER_SIZE);
+
+	memset(pnop_out, 0, BE_ISCSI_PDU_HEADER_SIZE);
+	AMAP_SET_BITS(struct amap_pdu_nop_out, ttt, pnop_out, 0xFFFFFFFF);
+	AMAP_SET_BITS(struct amap_pdu_nop_out, f_bit, pnop_out, 1);
+	AMAP_SET_BITS(struct amap_pdu_nop_out, i_bit, pnop_out, 0);
+}
+
+static void beiscsi_init_wrb_handle(struct beiscsi_hba *phba)
+{
+	struct be_mem_descriptor *mem_descr_wrbh, *mem_descr_wrb;
+	struct wrb_handle *pwrb_handle;
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_wrb_context *pwrb_context;
+	struct iscsi_wrb *pwrb;
+	unsigned int num_cxn_wrbh;
+	unsigned int num_cxn_wrb, j, idx, index;
+
+	mem_descr_wrbh = phba->init_mem;
+	mem_descr_wrbh += HWI_MEM_WRBH;
+
+	mem_descr_wrb = phba->init_mem;
+	mem_descr_wrb += HWI_MEM_WRB;
+
+	idx = 0;
+	pwrb_handle = mem_descr_wrbh->mem_array[idx].virtual_address;
+	num_cxn_wrbh = ((mem_descr_wrbh->mem_array[idx].size) /
+			((sizeof(struct wrb_handle)) *
+			 phba->params.wrbs_per_cxn));
+	phwi_ctrlr = phba->phwi_ctrlr;
+
+	for (index = 0; index < phba->params.cxns_per_ctrl * 2; index += 2) {
+		pwrb_context = &phwi_ctrlr->wrb_context[index];
+		SE_DEBUG(DBG_LVL_8, "cid=%d pwrb_context=%p \n", index,
+						pwrb_context);
+		pwrb_context->pwrb_handle_base =
+				kzalloc(sizeof(struct wrb_handle *) *
+					phba->params.wrbs_per_cxn, GFP_KERNEL);
+		pwrb_context->pwrb_handle_basestd =
+				kzalloc(sizeof(struct wrb_handle *) *
+					phba->params.wrbs_per_cxn, GFP_KERNEL);
+		if (num_cxn_wrbh) {
+			pwrb_context->alloc_index = 0;
+			pwrb_context->wrb_handles_available = 0;
+			for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
+				pwrb_context->pwrb_handle_base[j] = pwrb_handle;
+				pwrb_context->pwrb_handle_basestd[j] =
+								pwrb_handle;
+				pwrb_context->wrb_handles_available++;
+				pwrb_handle++;
+			}
+			pwrb_context->free_index = 0;
+			num_cxn_wrbh--;
+		} else {
+			idx++;
+			pwrb_handle =
+			    mem_descr_wrbh->mem_array[idx].virtual_address;
+			num_cxn_wrbh =
+			    ((mem_descr_wrbh->mem_array[idx].size) /
+			     ((sizeof(struct wrb_handle)) *
+			      phba->params.wrbs_per_cxn));
+			pwrb_context->alloc_index = 0;
+			for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
+				pwrb_context->pwrb_handle_base[j] = pwrb_handle;
+				pwrb_context->pwrb_handle_basestd[j] =
+				    pwrb_handle;
+				pwrb_context->wrb_handles_available++;
+				pwrb_handle++;
+			}
+			pwrb_context->free_index = 0;
+			num_cxn_wrbh--;
+		}
+	}
+	idx = 0;
+	pwrb = mem_descr_wrb->mem_array[idx].virtual_address;
+	num_cxn_wrb =
+	    ((mem_descr_wrb->mem_array[idx].size) / (sizeof(struct iscsi_wrb)) *
+	     phba->params.wrbs_per_cxn);
+
+	for (index = 0; index < phba->params.cxns_per_ctrl; index += 2) {
+		pwrb_context = &phwi_ctrlr->wrb_context[index];
+		if (num_cxn_wrb) {
+			for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
+				pwrb_handle = pwrb_context->pwrb_handle_base[j];
+				pwrb_handle->pwrb = pwrb;
+				pwrb++;
+			}
+			num_cxn_wrb--;
+		} else {
+			idx++;
+			pwrb = mem_descr_wrb->mem_array[idx].virtual_address;
+			num_cxn_wrb = ((mem_descr_wrb->mem_array[idx].size) /
+					(sizeof(struct iscsi_wrb)) *
+					phba->params.wrbs_per_cxn);
+			for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
+				pwrb_handle = pwrb_context->pwrb_handle_base[j];
+				pwrb_handle->pwrb = pwrb;
+				pwrb++;
+			}
+			num_cxn_wrb--;
+		}
+	}
+}
+
+static void hwi_init_async_pdu_ctx(struct beiscsi_hba *phba)
+{
+	struct hwi_controller *phwi_ctrlr;
+	struct hba_parameters *p = &phba->params;
+	struct hwi_async_pdu_context *pasync_ctx;
+	struct async_pdu_handle *pasync_header_h, *pasync_data_h;
+	unsigned int index;
+	struct be_mem_descriptor *mem_descr;
+
+	mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+	mem_descr += HWI_MEM_ASYNC_PDU_CONTEXT;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	phwi_ctrlr->phwi_ctxt->pasync_ctx = (struct hwi_async_pdu_context *)
+				mem_descr->mem_array[0].virtual_address;
+	pasync_ctx = phwi_ctrlr->phwi_ctxt->pasync_ctx;
+	memset(pasync_ctx, 0, sizeof(*pasync_ctx));
+
+	pasync_ctx->async_header.num_entries = p->asyncpdus_per_ctrl;
+	pasync_ctx->async_header.buffer_size = p->defpdu_hdr_sz;
+	pasync_ctx->async_data.buffer_size = p->defpdu_data_sz;
+	pasync_ctx->async_data.num_entries = p->asyncpdus_per_ctrl;
+
+	mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+	mem_descr += HWI_MEM_ASYNC_HEADER_BUF;
+	if (mem_descr->mem_array[0].virtual_address) {
+		SE_DEBUG(DBG_LVL_8,
+			 "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_HEADER_BUF"
+			 "va=%p \n", mem_descr->mem_array[0].virtual_address);
+	} else
+		shost_printk(KERN_WARNING, phba->shost,
+			     "No Virtual address \n");
+
+	pasync_ctx->async_header.va_base =
+			mem_descr->mem_array[0].virtual_address;
+
+	pasync_ctx->async_header.pa_base.u.a64.address =
+			mem_descr->mem_array[0].bus_address.u.a64.address;
+
+	mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+	mem_descr += HWI_MEM_ASYNC_HEADER_RING;
+	if (mem_descr->mem_array[0].virtual_address) {
+		SE_DEBUG(DBG_LVL_8,
+			 "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_HEADER_RING"
+			 "va=%p \n", mem_descr->mem_array[0].virtual_address);
+	} else
+		shost_printk(KERN_WARNING, phba->shost,
+			    "No Virtual address \n");
+	pasync_ctx->async_header.ring_base =
+			mem_descr->mem_array[0].virtual_address;
+
+	mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+	mem_descr += HWI_MEM_ASYNC_HEADER_HANDLE;
+	if (mem_descr->mem_array[0].virtual_address) {
+		SE_DEBUG(DBG_LVL_8,
+			 "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_HEADER_HANDLE"
+			 "va=%p \n", mem_descr->mem_array[0].virtual_address);
+	} else
+		shost_printk(KERN_WARNING, phba->shost,
+			    "No Virtual address \n");
+
+	pasync_ctx->async_header.handle_base =
+			mem_descr->mem_array[0].virtual_address;
+	pasync_ctx->async_header.writables = 0;
+	INIT_LIST_HEAD(&pasync_ctx->async_header.free_list);
+
+	mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+	mem_descr += HWI_MEM_ASYNC_DATA_BUF;
+	if (mem_descr->mem_array[0].virtual_address) {
+		SE_DEBUG(DBG_LVL_8,
+			 "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_DATA_BUF"
+			 "va=%p \n", mem_descr->mem_array[0].virtual_address);
+	} else
+		shost_printk(KERN_WARNING, phba->shost,
+			    "No Virtual address \n");
+	pasync_ctx->async_data.va_base =
+			mem_descr->mem_array[0].virtual_address;
+	pasync_ctx->async_data.pa_base.u.a64.address =
+			mem_descr->mem_array[0].bus_address.u.a64.address;
+
+	mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+	mem_descr += HWI_MEM_ASYNC_DATA_RING;
+	if (mem_descr->mem_array[0].virtual_address) {
+		SE_DEBUG(DBG_LVL_8,
+			 "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_DATA_RING"
+			 "va=%p \n", mem_descr->mem_array[0].virtual_address);
+	} else
+		shost_printk(KERN_WARNING, phba->shost,
+			     "No Virtual address \n");
+
+	pasync_ctx->async_data.ring_base =
+			mem_descr->mem_array[0].virtual_address;
+
+	mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+	mem_descr += HWI_MEM_ASYNC_DATA_HANDLE;
+	if (!mem_descr->mem_array[0].virtual_address)
+		shost_printk(KERN_WARNING, phba->shost,
+			    "No Virtual address \n");
+
+	pasync_ctx->async_data.handle_base =
+			mem_descr->mem_array[0].virtual_address;
+	pasync_ctx->async_data.writables = 0;
+	INIT_LIST_HEAD(&pasync_ctx->async_data.free_list);
+
+	pasync_header_h =
+		(struct async_pdu_handle *)pasync_ctx->async_header.handle_base;
+	pasync_data_h =
+		(struct async_pdu_handle *)pasync_ctx->async_data.handle_base;
+
+	for (index = 0; index < p->asyncpdus_per_ctrl; index++) {
+		pasync_header_h->cri = -1;
+		pasync_header_h->index = (char)index;
+		INIT_LIST_HEAD(&pasync_header_h->link);
+		pasync_header_h->pbuffer =
+			(void *)((unsigned long)
+			(pasync_ctx->async_header.va_base) +
+			(p->defpdu_hdr_sz * index));
+
+		pasync_header_h->pa.u.a64.address =
+			pasync_ctx->async_header.pa_base.u.a64.address +
+			(p->defpdu_hdr_sz * index);
+
+		list_add_tail(&pasync_header_h->link,
+				&pasync_ctx->async_header.free_list);
+		pasync_header_h++;
+		pasync_ctx->async_header.free_entries++;
+		pasync_ctx->async_header.writables++;
+
+		INIT_LIST_HEAD(&pasync_ctx->async_entry[index].wait_queue.list);
+		INIT_LIST_HEAD(&pasync_ctx->async_entry[index].
+			       header_busy_list);
+		pasync_data_h->cri = -1;
+		pasync_data_h->index = (char)index;
+		INIT_LIST_HEAD(&pasync_data_h->link);
+		pasync_data_h->pbuffer =
+			(void *)((unsigned long)
+			(pasync_ctx->async_data.va_base) +
+			(p->defpdu_data_sz * index));
+
+		pasync_data_h->pa.u.a64.address =
+		    pasync_ctx->async_data.pa_base.u.a64.address +
+		    (p->defpdu_data_sz * index);
+
+		list_add_tail(&pasync_data_h->link,
+			      &pasync_ctx->async_data.free_list);
+		pasync_data_h++;
+		pasync_ctx->async_data.free_entries++;
+		pasync_ctx->async_data.writables++;
+
+		INIT_LIST_HEAD(&pasync_ctx->async_entry[index].data_busy_list);
+	}
+
+	pasync_ctx->async_header.host_write_ptr = 0;
+	pasync_ctx->async_header.ep_read_ptr = -1;
+	pasync_ctx->async_data.host_write_ptr = 0;
+	pasync_ctx->async_data.ep_read_ptr = -1;
+}
+
+static int
+be_sgl_create_contiguous(void *virtual_address,
+			 u64 physical_address, u32 length,
+			 struct be_dma_mem *sgl)
+{
+	WARN_ON(!virtual_address);
+	WARN_ON(!physical_address);
+	WARN_ON(!length > 0);
+	WARN_ON(!sgl);
+
+	sgl->va = virtual_address;
+	sgl->dma = physical_address;
+	sgl->size = length;
+
+	return 0;
+}
+
+static void be_sgl_destroy_contiguous(struct be_dma_mem *sgl)
+{
+	memset(sgl, 0, sizeof(*sgl));
+}
+
+static void
+hwi_build_be_sgl_arr(struct beiscsi_hba *phba,
+		     struct mem_array *pmem, struct be_dma_mem *sgl)
+{
+	if (sgl->va)
+		be_sgl_destroy_contiguous(sgl);
+
+	be_sgl_create_contiguous(pmem->virtual_address,
+				 pmem->bus_address.u.a64.address,
+				 pmem->size, sgl);
+}
+
+static void
+hwi_build_be_sgl_by_offset(struct beiscsi_hba *phba,
+			   struct mem_array *pmem, struct be_dma_mem *sgl)
+{
+	if (sgl->va)
+		be_sgl_destroy_contiguous(sgl);
+
+	be_sgl_create_contiguous((unsigned char *)pmem->virtual_address,
+				 pmem->bus_address.u.a64.address,
+				 pmem->size, sgl);
+}
+
+static int be_fill_queue(struct be_queue_info *q,
+		u16 len, u16 entry_size, void *vaddress)
+{
+	struct be_dma_mem *mem = &q->dma_mem;
+
+	memset(q, 0, sizeof(*q));
+	q->len = len;
+	q->entry_size = entry_size;
+	mem->size = len * entry_size;
+	mem->va = vaddress;
+	if (!mem->va)
+		return -ENOMEM;
+	memset(mem->va, 0, mem->size);
+	return 0;
+}
+
+static int beiscsi_create_eq(struct beiscsi_hba *phba,
+			     struct hwi_context_memory *phwi_context)
+{
+	unsigned int idx;
+	int ret;
+	struct be_queue_info *eq;
+	struct be_dma_mem *mem;
+	struct be_mem_descriptor *mem_descr;
+	void *eq_vaddress;
+
+	idx = 0;
+	eq = &phwi_context->be_eq.q;
+	mem = &eq->dma_mem;
+	mem_descr = phba->init_mem;
+	mem_descr += HWI_MEM_EQ;
+	eq_vaddress = mem_descr->mem_array[idx].virtual_address;
+
+	ret = be_fill_queue(eq, phba->params.num_eq_entries,
+			    sizeof(struct be_eq_entry), eq_vaddress);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "be_fill_queue Failed for EQ \n");
+		return ret;
+	}
+
+	mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
+
+	ret = beiscsi_cmd_eq_create(&phba->ctrl, eq,
+				    phwi_context->be_eq.cur_eqd);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_cmd_eq_create"
+			     "Failedfor EQ \n");
+		return ret;
+	}
+	SE_DEBUG(DBG_LVL_8, "eq id is %d\n", phwi_context->be_eq.q.id);
+	return 0;
+}
+
+static int beiscsi_create_cq(struct beiscsi_hba *phba,
+			     struct hwi_context_memory *phwi_context)
+{
+	unsigned int idx;
+	int ret;
+	struct be_queue_info *cq, *eq;
+	struct be_dma_mem *mem;
+	struct be_mem_descriptor *mem_descr;
+	void *cq_vaddress;
+
+	idx = 0;
+	cq = &phwi_context->be_cq;
+	eq = &phwi_context->be_eq.q;
+	mem = &cq->dma_mem;
+	mem_descr = phba->init_mem;
+	mem_descr += HWI_MEM_CQ;
+	cq_vaddress = mem_descr->mem_array[idx].virtual_address;
+	ret = be_fill_queue(cq, phba->params.icds_per_ctrl / 2,
+			    sizeof(struct sol_cqe), cq_vaddress);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "be_fill_queue Failed for ISCSI CQ \n");
+		return ret;
+	}
+
+	mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
+	ret = beiscsi_cmd_cq_create(&phba->ctrl, cq, eq, false, false, 0);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "beiscsi_cmd_eq_create Failed for ISCSI CQ \n");
+		return ret;
+	}
+	SE_DEBUG(DBG_LVL_8, "iscsi cq id is %d\n", phwi_context->be_cq.id);
+	SE_DEBUG(DBG_LVL_8, "ISCSI CQ CREATED\n");
+	return 0;
+}
+
+static int
+beiscsi_create_def_hdr(struct beiscsi_hba *phba,
+		       struct hwi_context_memory *phwi_context,
+		       struct hwi_controller *phwi_ctrlr,
+		       unsigned int def_pdu_ring_sz)
+{
+	unsigned int idx;
+	int ret;
+	struct be_queue_info *dq, *cq;
+	struct be_dma_mem *mem;
+	struct be_mem_descriptor *mem_descr;
+	void *dq_vaddress;
+
+	idx = 0;
+	dq = &phwi_context->be_def_hdrq;
+	cq = &phwi_context->be_cq;
+	mem = &dq->dma_mem;
+	mem_descr = phba->init_mem;
+	mem_descr += HWI_MEM_ASYNC_HEADER_RING;
+	dq_vaddress = mem_descr->mem_array[idx].virtual_address;
+	ret = be_fill_queue(dq, mem_descr->mem_array[0].size /
+			    sizeof(struct phys_addr),
+			    sizeof(struct phys_addr), dq_vaddress);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "be_fill_queue Failed for DEF PDU HDR\n");
+		return ret;
+	}
+	mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
+	ret = be_cmd_create_default_pdu_queue(&phba->ctrl, cq, dq,
+					      def_pdu_ring_sz,
+					      phba->params.defpdu_hdr_sz);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "be_cmd_create_default_pdu_queue Failed DEFHDR\n");
+		return ret;
+	}
+	phwi_ctrlr->default_pdu_hdr.id = phwi_context->be_def_hdrq.id;
+	SE_DEBUG(DBG_LVL_8, "iscsi def pdu id is %d\n",
+		 phwi_context->be_def_hdrq.id);
+	hwi_post_async_buffers(phba, 1);
+	return 0;
+}
+
+static int
+beiscsi_create_def_data(struct beiscsi_hba *phba,
+			struct hwi_context_memory *phwi_context,
+			struct hwi_controller *phwi_ctrlr,
+			unsigned int def_pdu_ring_sz)
+{
+	unsigned int idx;
+	int ret;
+	struct be_queue_info *dataq, *cq;
+	struct be_dma_mem *mem;
+	struct be_mem_descriptor *mem_descr;
+	void *dq_vaddress;
+
+	idx = 0;
+	dataq = &phwi_context->be_def_dataq;
+	cq = &phwi_context->be_cq;
+	mem = &dataq->dma_mem;
+	mem_descr = phba->init_mem;
+	mem_descr += HWI_MEM_ASYNC_DATA_RING;
+	dq_vaddress = mem_descr->mem_array[idx].virtual_address;
+	ret = be_fill_queue(dataq, mem_descr->mem_array[0].size /
+			    sizeof(struct phys_addr),
+			    sizeof(struct phys_addr), dq_vaddress);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "be_fill_queue Failed for DEF PDU DATA\n");
+		return ret;
+	}
+	mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
+	ret = be_cmd_create_default_pdu_queue(&phba->ctrl, cq, dataq,
+					      def_pdu_ring_sz,
+					      phba->params.defpdu_data_sz);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "be_cmd_create_default_pdu_queue Failed"
+			     " for DEF PDU DATA\n");
+		return ret;
+	}
+	phwi_ctrlr->default_pdu_data.id = phwi_context->be_def_dataq.id;
+	SE_DEBUG(DBG_LVL_8, "iscsi def data id is %d\n",
+		 phwi_context->be_def_dataq.id);
+	hwi_post_async_buffers(phba, 0);
+	SE_DEBUG(DBG_LVL_8, "DEFAULT PDU DATA RING CREATED \n");
+	return 0;
+}
+
+static int
+beiscsi_post_pages(struct beiscsi_hba *phba)
+{
+	struct be_mem_descriptor *mem_descr;
+	struct mem_array *pm_arr;
+	unsigned int page_offset, i;
+	struct be_dma_mem sgl;
+	int status;
+
+	mem_descr = phba->init_mem;
+	mem_descr += HWI_MEM_SGE;
+	pm_arr = mem_descr->mem_array;
+
+	page_offset = (sizeof(struct iscsi_sge) * phba->params.num_sge_per_io *
+			phba->fw_config.iscsi_icd_start) / PAGE_SIZE;
+	for (i = 0; i < mem_descr->num_elements; i++) {
+		hwi_build_be_sgl_arr(phba, pm_arr, &sgl);
+		status = be_cmd_iscsi_post_sgl_pages(&phba->ctrl, &sgl,
+						page_offset,
+						(pm_arr->size / PAGE_SIZE));
+		page_offset += pm_arr->size / PAGE_SIZE;
+		if (status != 0) {
+			shost_printk(KERN_ERR, phba->shost,
+				     "post sgl failed.\n");
+			return status;
+		}
+		pm_arr++;
+	}
+	SE_DEBUG(DBG_LVL_8, "POSTED PAGES \n");
+	return 0;
+}
+
+static int
+beiscsi_create_wrb_rings(struct beiscsi_hba *phba,
+			 struct hwi_context_memory *phwi_context,
+			 struct hwi_controller *phwi_ctrlr)
+{
+	unsigned int wrb_mem_index, offset, size, num_wrb_rings;
+	u64 pa_addr_lo;
+	unsigned int idx, num, i;
+	struct mem_array *pwrb_arr;
+	void *wrb_vaddr;
+	struct be_dma_mem sgl;
+	struct be_mem_descriptor *mem_descr;
+	int status;
+
+	idx = 0;
+	mem_descr = phba->init_mem;
+	mem_descr += HWI_MEM_WRB;
+	pwrb_arr = kmalloc(sizeof(*pwrb_arr) * phba->params.cxns_per_ctrl,
+			   GFP_KERNEL);
+	if (!pwrb_arr) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "Memory alloc failed in create wrb ring.\n");
+		return -ENOMEM;
+	}
+	wrb_vaddr = mem_descr->mem_array[idx].virtual_address;
+	pa_addr_lo = mem_descr->mem_array[idx].bus_address.u.a64.address;
+	num_wrb_rings = mem_descr->mem_array[idx].size /
+		(phba->params.wrbs_per_cxn * sizeof(struct iscsi_wrb));
+
+	for (num = 0; num < phba->params.cxns_per_ctrl; num++) {
+		if (num_wrb_rings) {
+			pwrb_arr[num].virtual_address = wrb_vaddr;
+			pwrb_arr[num].bus_address.u.a64.address	= pa_addr_lo;
+			pwrb_arr[num].size = phba->params.wrbs_per_cxn *
+					    sizeof(struct iscsi_wrb);
+			wrb_vaddr += pwrb_arr[num].size;
+			pa_addr_lo += pwrb_arr[num].size;
+			num_wrb_rings--;
+		} else {
+			idx++;
+			wrb_vaddr = mem_descr->mem_array[idx].virtual_address;
+			pa_addr_lo = mem_descr->mem_array[idx].\
+					bus_address.u.a64.address;
+			num_wrb_rings = mem_descr->mem_array[idx].size /
+					(phba->params.wrbs_per_cxn *
+					sizeof(struct iscsi_wrb));
+			pwrb_arr[num].virtual_address = wrb_vaddr;
+			pwrb_arr[num].bus_address.u.a64.address\
+						= pa_addr_lo;
+			pwrb_arr[num].size = phba->params.wrbs_per_cxn *
+						 sizeof(struct iscsi_wrb);
+			wrb_vaddr += pwrb_arr[num].size;
+			pa_addr_lo   += pwrb_arr[num].size;
+			num_wrb_rings--;
+		}
+	}
+	for (i = 0; i < phba->params.cxns_per_ctrl; i++) {
+		wrb_mem_index = 0;
+		offset = 0;
+		size = 0;
+
+		hwi_build_be_sgl_by_offset(phba, &pwrb_arr[i], &sgl);
+		status = be_cmd_wrbq_create(&phba->ctrl, &sgl,
+					    &phwi_context->be_wrbq[i]);
+		if (status != 0) {
+			shost_printk(KERN_ERR, phba->shost,
+				     "wrbq create failed.");
+			return status;
+		}
+		phwi_ctrlr->wrb_context[i].cid = phwi_context->be_wrbq[i].id;
+	}
+	kfree(pwrb_arr);
+	return 0;
+}
+
+static void free_wrb_handles(struct beiscsi_hba *phba)
+{
+	unsigned int index;
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_wrb_context *pwrb_context;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	for (index = 0; index < phba->params.cxns_per_ctrl * 2; index += 2) {
+		pwrb_context = &phwi_ctrlr->wrb_context[index];
+		kfree(pwrb_context->pwrb_handle_base);
+		kfree(pwrb_context->pwrb_handle_basestd);
+	}
+}
+
+static void hwi_cleanup(struct beiscsi_hba *phba)
+{
+	struct be_queue_info *q;
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_context_memory *phwi_context;
+	int i;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	phwi_context = phwi_ctrlr->phwi_ctxt;
+	for (i = 0; i < phba->params.cxns_per_ctrl; i++) {
+		q = &phwi_context->be_wrbq[i];
+		if (q->created)
+			beiscsi_cmd_q_destroy(ctrl, q, QTYPE_WRBQ);
+	}
+
+	free_wrb_handles(phba);
+
+	q = &phwi_context->be_def_hdrq;
+	if (q->created)
+		beiscsi_cmd_q_destroy(ctrl, q, QTYPE_DPDUQ);
+
+	q = &phwi_context->be_def_dataq;
+	if (q->created)
+		beiscsi_cmd_q_destroy(ctrl, q, QTYPE_DPDUQ);
+
+	beiscsi_cmd_q_destroy(ctrl, NULL, QTYPE_SGL);
+
+	q = &phwi_context->be_cq;
+	if (q->created)
+		beiscsi_cmd_q_destroy(ctrl, q, QTYPE_CQ);
+
+	q = &phwi_context->be_eq.q;
+	if (q->created)
+		beiscsi_cmd_q_destroy(ctrl, q, QTYPE_EQ);
+}
+
+static int hwi_init_port(struct beiscsi_hba *phba)
+{
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_context_memory *phwi_context;
+	unsigned int def_pdu_ring_sz;
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	int status;
+
+	def_pdu_ring_sz =
+		phba->params.asyncpdus_per_ctrl * sizeof(struct phys_addr);
+	phwi_ctrlr = phba->phwi_ctrlr;
+
+	phwi_context = phwi_ctrlr->phwi_ctxt;
+	phwi_context->be_eq.max_eqd = 0;
+	phwi_context->be_eq.min_eqd = 0;
+	phwi_context->be_eq.cur_eqd = 64;
+	phwi_context->be_eq.enable_aic = false;
+	be_cmd_fw_initialize(&phba->ctrl);
+	status = beiscsi_create_eq(phba, phwi_context);
+	if (status != 0) {
+		shost_printk(KERN_ERR, phba->shost, "EQ not created \n");
+		goto error;
+	}
+
+	status = mgmt_check_supported_fw(ctrl);
+	if (status != 0) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "Unsupported fw version \n");
+		goto error;
+	}
+
+	status = mgmt_get_fw_config(ctrl, phba);
+	if (status != 0) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "Error getting fw config\n");
+		goto error;
+	}
+
+	status = beiscsi_create_cq(phba, phwi_context);
+	if (status != 0) {
+		shost_printk(KERN_ERR, phba->shost, "CQ not created\n");
+		goto error;
+	}
+
+	status = beiscsi_create_def_hdr(phba, phwi_context, phwi_ctrlr,
+					def_pdu_ring_sz);
+	if (status != 0) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "Default Header not created\n");
+		goto error;
+	}
+
+	status = beiscsi_create_def_data(phba, phwi_context,
+					 phwi_ctrlr, def_pdu_ring_sz);
+	if (status != 0) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "Default Data not created\n");
+		goto error;
+	}
+
+	status = beiscsi_post_pages(phba);
+	if (status != 0) {
+		shost_printk(KERN_ERR, phba->shost, "Post SGL Pages Failed\n");
+		goto error;
+	}
+
+	status = beiscsi_create_wrb_rings(phba,	phwi_context, phwi_ctrlr);
+	if (status != 0) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "WRB Rings not created\n");
+		goto error;
+	}
+
+	SE_DEBUG(DBG_LVL_8, "hwi_init_port success\n");
+	return 0;
+
+error:
+	shost_printk(KERN_ERR, phba->shost, "hwi_init_port failed");
+	hwi_cleanup(phba);
+	return -ENOMEM;
+}
+
+
+static int hwi_init_controller(struct beiscsi_hba *phba)
+{
+	struct hwi_controller *phwi_ctrlr;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	if (1 == phba->init_mem[HWI_MEM_ADDN_CONTEXT].num_elements) {
+		phwi_ctrlr->phwi_ctxt = (struct hwi_context_memory *)phba->
+		    init_mem[HWI_MEM_ADDN_CONTEXT].mem_array[0].virtual_address;
+		SE_DEBUG(DBG_LVL_8, " phwi_ctrlr->phwi_ctxt=%p \n",
+			 phwi_ctrlr->phwi_ctxt);
+	} else {
+		shost_printk(KERN_ERR, phba->shost,
+			     "HWI_MEM_ADDN_CONTEXT is more than one element."
+			     "Failing to load\n");
+		return -ENOMEM;
+	}
+
+	iscsi_init_global_templates(phba);
+	beiscsi_init_wrb_handle(phba);
+	hwi_init_async_pdu_ctx(phba);
+	if (hwi_init_port(phba) != 0) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "hwi_init_controller failed\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void beiscsi_free_mem(struct beiscsi_hba *phba)
+{
+	struct be_mem_descriptor *mem_descr;
+	int i, j;
+
+	mem_descr = phba->init_mem;
+	i = 0;
+	j = 0;
+	for (i = 0; i < SE_MEM_MAX; i++) {
+		for (j = mem_descr->num_elements; j > 0; j--) {
+			pci_free_consistent(phba->pcidev,
+			  mem_descr->mem_array[j - 1].size,
+			  mem_descr->mem_array[j - 1].virtual_address,
+			  mem_descr->mem_array[j - 1].bus_address.
+				u.a64.address);
+		}
+		kfree(mem_descr->mem_array);
+		mem_descr++;
+	}
+	kfree(phba->init_mem);
+	kfree(phba->phwi_ctrlr);
+}
+
+static int beiscsi_init_controller(struct beiscsi_hba *phba)
+{
+	int ret = -ENOMEM;
+
+	ret = beiscsi_get_memory(phba);
+	if (ret < 0) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe -"
+			     "Failed in beiscsi_alloc_memory \n");
+		return ret;
+	}
+
+	ret = hwi_init_controller(phba);
+	if (ret)
+		goto free_init;
+	SE_DEBUG(DBG_LVL_8, "Return success from beiscsi_init_controller");
+	return 0;
+
+free_init:
+	beiscsi_free_mem(phba);
+	return -ENOMEM;
+}
+
+static int beiscsi_init_sgl_handle(struct beiscsi_hba *phba)
+{
+	struct be_mem_descriptor *mem_descr_sglh, *mem_descr_sg;
+	struct sgl_handle *psgl_handle;
+	struct iscsi_sge *pfrag;
+	unsigned int arr_index, i, idx;
+
+	phba->io_sgl_hndl_avbl = 0;
+	phba->eh_sgl_hndl_avbl = 0;
+	mem_descr_sglh = phba->init_mem;
+	mem_descr_sglh += HWI_MEM_SGLH;
+	if (1 == mem_descr_sglh->num_elements) {
+		phba->io_sgl_hndl_base = kzalloc(sizeof(struct sgl_handle *) *
+						 phba->params.ios_per_ctrl,
+						 GFP_KERNEL);
+		if (!phba->io_sgl_hndl_base) {
+			shost_printk(KERN_ERR, phba->shost,
+				     "Mem Alloc Failed. Failing to load\n");
+			return -ENOMEM;
+		}
+		phba->eh_sgl_hndl_base = kzalloc(sizeof(struct sgl_handle *) *
+						 (phba->params.icds_per_ctrl -
+						 phba->params.ios_per_ctrl),
+						 GFP_KERNEL);
+		if (!phba->eh_sgl_hndl_base) {
+			kfree(phba->io_sgl_hndl_base);
+			shost_printk(KERN_ERR, phba->shost,
+				     "Mem Alloc Failed. Failing to load\n");
+			return -ENOMEM;
+		}
+	} else {
+		shost_printk(KERN_ERR, phba->shost,
+			     "HWI_MEM_SGLH is more than one element."
+			     "Failing to load\n");
+		return -ENOMEM;
+	}
+
+	arr_index = 0;
+	idx = 0;
+	while (idx < mem_descr_sglh->num_elements) {
+		psgl_handle = mem_descr_sglh->mem_array[idx].virtual_address;
+
+		for (i = 0; i < (mem_descr_sglh->mem_array[idx].size /
+		      sizeof(struct sgl_handle)); i++) {
+			if (arr_index < phba->params.ios_per_ctrl) {
+				phba->io_sgl_hndl_base[arr_index] = psgl_handle;
+				phba->io_sgl_hndl_avbl++;
+				arr_index++;
+			} else {
+				phba->eh_sgl_hndl_base[arr_index -
+					phba->params.ios_per_ctrl] =
+								psgl_handle;
+				arr_index++;
+				phba->eh_sgl_hndl_avbl++;
+			}
+			psgl_handle++;
+		}
+		idx++;
+	}
+	SE_DEBUG(DBG_LVL_8,
+		 "phba->io_sgl_hndl_avbl=%d"
+		 "phba->eh_sgl_hndl_avbl=%d \n",
+		 phba->io_sgl_hndl_avbl,
+		 phba->eh_sgl_hndl_avbl);
+	mem_descr_sg = phba->init_mem;
+	mem_descr_sg += HWI_MEM_SGE;
+	SE_DEBUG(DBG_LVL_8, "\n mem_descr_sg->num_elements=%d \n",
+		 mem_descr_sg->num_elements);
+	arr_index = 0;
+	idx = 0;
+	while (idx < mem_descr_sg->num_elements) {
+		pfrag = mem_descr_sg->mem_array[idx].virtual_address;
+
+		for (i = 0;
+		     i < (mem_descr_sg->mem_array[idx].size) /
+		     (sizeof(struct iscsi_sge) * phba->params.num_sge_per_io);
+		     i++) {
+			if (arr_index < phba->params.ios_per_ctrl)
+				psgl_handle = phba->io_sgl_hndl_base[arr_index];
+			else
+				psgl_handle = phba->eh_sgl_hndl_base[arr_index -
+						phba->params.ios_per_ctrl];
+			psgl_handle->pfrag = pfrag;
+			AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, pfrag, 0);
+			AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, pfrag, 0);
+			pfrag += phba->params.num_sge_per_io;
+			psgl_handle->sgl_index =
+				phba->fw_config.iscsi_cid_start + arr_index++;
+		}
+		idx++;
+	}
+	phba->io_sgl_free_index = 0;
+	phba->io_sgl_alloc_index = 0;
+	phba->eh_sgl_free_index = 0;
+	phba->eh_sgl_alloc_index = 0;
+	return 0;
+}
+
+static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
+{
+	int i, new_cid;
+
+	phba->cid_array = kmalloc(sizeof(void *) * phba->params.cxns_per_ctrl,
+				  GFP_KERNEL);
+	if (!phba->cid_array) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "Failed to allocate memory in "
+			     "hba_setup_cid_tbls\n");
+		return -ENOMEM;
+	}
+	phba->ep_array = kmalloc(sizeof(struct iscsi_endpoint *) *
+				 phba->params.cxns_per_ctrl * 2, GFP_KERNEL);
+	if (!phba->ep_array) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "Failed to allocate memory in "
+			     "hba_setup_cid_tbls \n");
+		kfree(phba->cid_array);
+		return -ENOMEM;
+	}
+	new_cid = phba->fw_config.iscsi_icd_start;
+	for (i = 0; i < phba->params.cxns_per_ctrl; i++) {
+		phba->cid_array[i] = new_cid;
+		new_cid += 2;
+	}
+	phba->avlbl_cids = phba->params.cxns_per_ctrl;
+	return 0;
+}
+
+static unsigned char hwi_enable_intr(struct beiscsi_hba *phba)
+{
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_context_memory *phwi_context;
+	struct be_queue_info *eq;
+	u8 __iomem *addr;
+	u32 reg;
+	u32 enabled;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	phwi_context = phwi_ctrlr->phwi_ctxt;
+
+	eq = &phwi_context->be_eq.q;
+	addr = (u8 __iomem *) ((u8 __iomem *) ctrl->pcicfg +
+			PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
+	reg = ioread32(addr);
+	SE_DEBUG(DBG_LVL_8, "reg =x%08x \n", reg);
+
+	enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+	if (!enabled) {
+		reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+		SE_DEBUG(DBG_LVL_8, "reg =x%08x addr=%p \n", reg, addr);
+		iowrite32(reg, addr);
+		SE_DEBUG(DBG_LVL_8, "eq->id=%d \n", eq->id);
+
+		hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
+	} else
+		shost_printk(KERN_WARNING, phba->shost,
+			     "In hwi_enable_intr, Not Enabled \n");
+	return true;
+}
+
+static void hwi_disable_intr(struct beiscsi_hba *phba)
+{
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+
+	u8 __iomem *addr = ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
+	u32 reg = ioread32(addr);
+
+	u32 enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+	if (enabled) {
+		reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+		iowrite32(reg, addr);
+	} else
+		shost_printk(KERN_WARNING, phba->shost,
+			     "In hwi_disable_intr, Already Disabled \n");
+}
+
+static int beiscsi_init_port(struct beiscsi_hba *phba)
+{
+	int ret;
+
+	ret = beiscsi_init_controller(phba);
+	if (ret < 0) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "beiscsi_dev_probe - Failed in"
+			     "beiscsi_init_controller \n");
+		return ret;
+	}
+	ret = beiscsi_init_sgl_handle(phba);
+	if (ret < 0) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "beiscsi_dev_probe - Failed in"
+			     "beiscsi_init_sgl_handle \n");
+		goto do_cleanup_ctrlr;
+	}
+
+	if (hba_setup_cid_tbls(phba)) {
+		shost_printk(KERN_ERR, phba->shost,
+			     "Failed in hba_setup_cid_tbls\n");
+		kfree(phba->io_sgl_hndl_base);
+		kfree(phba->eh_sgl_hndl_base);
+		goto do_cleanup_ctrlr;
+	}
+
+	return ret;
+
+do_cleanup_ctrlr:
+	hwi_cleanup(phba);
+	return ret;
+}
+
+static void hwi_purge_eq(struct beiscsi_hba *phba)
+{
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_context_memory *phwi_context;
+	struct be_queue_info *eq;
+	struct be_eq_entry *eqe = NULL;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	phwi_context = phwi_ctrlr->phwi_ctxt;
+	eq = &phwi_context->be_eq.q;
+	eqe = queue_tail_node(eq);
+
+	while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+						& EQE_VALID_MASK) {
+		AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+		queue_tail_inc(eq);
+		eqe = queue_tail_node(eq);
+	}
+}
+
+static void beiscsi_clean_port(struct beiscsi_hba *phba)
+{
+	unsigned char mgmt_status;
+
+	mgmt_status = mgmt_epfw_cleanup(phba, CMD_CONNECTION_CHUTE_0);
+	if (mgmt_status)
+		shost_printk(KERN_WARNING, phba->shost,
+			     "mgmt_epfw_cleanup FAILED \n");
+	hwi_cleanup(phba);
+	hwi_purge_eq(phba);
+	kfree(phba->io_sgl_hndl_base);
+	kfree(phba->eh_sgl_hndl_base);
+	kfree(phba->cid_array);
+	kfree(phba->ep_array);
+}
+
+void
+beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
+			   struct beiscsi_offload_params *params)
+{
+	struct wrb_handle *pwrb_handle;
+	struct iscsi_target_context_update_wrb *pwrb = NULL;
+	struct be_mem_descriptor *mem_descr;
+	struct beiscsi_hba *phba = beiscsi_conn->phba;
+	u32 doorbell = 0;
+
+	/*
+	 * We can always use 0 here because it is reserved by libiscsi for
+	 * login/startup related tasks.
+	 */
+	pwrb_handle = alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid, 0);
+	pwrb = (struct iscsi_target_context_update_wrb *)pwrb_handle->pwrb;
+	memset(pwrb, 0, sizeof(*pwrb));
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      max_burst_length, pwrb, params->dw[offsetof
+		      (struct amap_beiscsi_offload_params,
+		      max_burst_length) / 32]);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      max_send_data_segment_length, pwrb,
+		      params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      max_send_data_segment_length) / 32]);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      first_burst_length,
+		      pwrb,
+		      params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      first_burst_length) / 32]);
+
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, erl, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      erl) / 32] & OFFLD_PARAMS_ERL));
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, dde, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      dde) / 32] & OFFLD_PARAMS_DDE) >> 2);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, hde, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      hde) / 32] & OFFLD_PARAMS_HDE) >> 3);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ir2t, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      ir2t) / 32] & OFFLD_PARAMS_IR2T) >> 4);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, imd, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		       imd) / 32] & OFFLD_PARAMS_IMD) >> 5);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, stat_sn,
+		      pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      exp_statsn) / 32] + 1));
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, type, pwrb,
+		      0x7);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, wrb_idx,
+		      pwrb, pwrb_handle->wrb_index);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ptr2nextwrb,
+		      pwrb, pwrb_handle->nxt_wrb_index);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+			session_state, pwrb, 0);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, compltonack,
+		      pwrb, 1);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, notpredblq,
+		      pwrb, 0);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, mode, pwrb,
+		      0);
+
+	mem_descr = phba->init_mem;
+	mem_descr += ISCSI_MEM_GLOBAL_HEADER;
+
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+			pad_buffer_addr_hi, pwrb,
+		      mem_descr->mem_array[0].bus_address.u.a32.address_hi);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+			pad_buffer_addr_lo, pwrb,
+		      mem_descr->mem_array[0].bus_address.u.a32.address_lo);
+
+	be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_target_context_update_wrb));
+
+	doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
+	doorbell |= (pwrb_handle->wrb_index & DB_DEF_PDU_WRB_INDEX_MASK) <<
+					DB_DEF_PDU_WRB_INDEX_SHIFT;
+	doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
+
+	iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
+}
+
+static void beiscsi_parse_pdu(struct iscsi_conn *conn, itt_t itt,
+			      int *index, int *age)
+{
+	*index = be32_to_cpu(itt) >> 16;
+	if (age)
+		*age = conn->session->age;
+}
+
+/**
+ * beiscsi_alloc_pdu - allocates pdu and related resources
+ * @task: libiscsi task
+ * @opcode: opcode of pdu for task
+ *
+ * This is called with the session lock held. It will allocate
+ * the wrb and sgl if needed for the command. And it will prep
+ * the pdu's itt. beiscsi_parse_pdu will later translate
+ * the pdu itt to the libiscsi task itt.
+ */
+static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
+{
+	struct beiscsi_io_task *io_task = task->dd_data;
+	struct iscsi_conn *conn = task->conn;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct beiscsi_hba *phba = beiscsi_conn->phba;
+	struct hwi_wrb_context *pwrb_context;
+	struct hwi_controller *phwi_ctrlr;
+	itt_t itt;
+	struct beiscsi_session *beiscsi_sess = beiscsi_conn->beiscsi_sess;
+	dma_addr_t paddr;
+
+	io_task->cmd_bhs = pci_pool_alloc(beiscsi_sess->bhs_pool,
+					  GFP_KERNEL, &paddr);
+
+	if (!io_task->cmd_bhs)
+		return -ENOMEM;
+
+	io_task->bhs_pa.u.a64.address = paddr;
+	io_task->pwrb_handle = alloc_wrb_handle(phba,
+						beiscsi_conn->beiscsi_conn_cid,
+						task->itt);
+	io_task->pwrb_handle->pio_handle = task;
+	io_task->conn = beiscsi_conn;
+
+	task->hdr = (struct iscsi_hdr *)&io_task->cmd_bhs->iscsi_hdr;
+	task->hdr_max = sizeof(struct be_cmd_bhs);
+
+	if (task->sc) {
+		spin_lock(&phba->io_sgl_lock);
+		io_task->psgl_handle = alloc_io_sgl_handle(phba);
+		spin_unlock(&phba->io_sgl_lock);
+		if (!io_task->psgl_handle)
+			goto free_hndls;
+
+	} else {
+		io_task->scsi_cmnd = NULL;
+		if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN) {
+			if (!beiscsi_conn->login_in_progress) {
+				spin_lock(&phba->mgmt_sgl_lock);
+				io_task->psgl_handle = (struct sgl_handle *)
+						alloc_mgmt_sgl_handle(phba);
+				spin_unlock(&phba->mgmt_sgl_lock);
+				if (!io_task->psgl_handle)
+					goto free_hndls;
+
+				beiscsi_conn->login_in_progress = 1;
+				beiscsi_conn->plogin_sgl_handle =
+							io_task->psgl_handle;
+			} else {
+				io_task->psgl_handle =
+						beiscsi_conn->plogin_sgl_handle;
+			}
+		} else {
+			spin_lock(&phba->mgmt_sgl_lock);
+			io_task->psgl_handle = alloc_mgmt_sgl_handle(phba);
+			spin_unlock(&phba->mgmt_sgl_lock);
+			if (!io_task->psgl_handle)
+				goto free_hndls;
+		}
+	}
+	itt = (itt_t) cpu_to_be32(((unsigned int)task->itt << 16) |
+			(unsigned int)(io_task->psgl_handle->sgl_index));
+	io_task->cmd_bhs->iscsi_hdr.itt = itt;
+	return 0;
+
+free_hndls:
+	phwi_ctrlr = phba->phwi_ctrlr;
+	pwrb_context = &phwi_ctrlr->wrb_context[beiscsi_conn->beiscsi_conn_cid];
+	free_wrb_handle(phba, pwrb_context, io_task->pwrb_handle);
+	io_task->pwrb_handle = NULL;
+	pci_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
+		      io_task->bhs_pa.u.a64.address);
+	SE_DEBUG(DBG_LVL_1, "Alloc of SGL_ICD Failed \n");
+	return -ENOMEM;
+}
+
+static void beiscsi_cleanup_task(struct iscsi_task *task)
+{
+	struct beiscsi_io_task *io_task = task->dd_data;
+	struct iscsi_conn *conn = task->conn;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct beiscsi_hba *phba = beiscsi_conn->phba;
+	struct beiscsi_session *beiscsi_sess = beiscsi_conn->beiscsi_sess;
+	struct hwi_wrb_context *pwrb_context;
+	struct hwi_controller *phwi_ctrlr;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	pwrb_context = &phwi_ctrlr->wrb_context[beiscsi_conn->beiscsi_conn_cid];
+	if (io_task->pwrb_handle) {
+		free_wrb_handle(phba, pwrb_context, io_task->pwrb_handle);
+		io_task->pwrb_handle = NULL;
+	}
+
+	if (io_task->cmd_bhs) {
+		pci_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
+			      io_task->bhs_pa.u.a64.address);
+	}
+
+	if (task->sc) {
+		if (io_task->psgl_handle) {
+			spin_lock(&phba->io_sgl_lock);
+			free_io_sgl_handle(phba, io_task->psgl_handle);
+			spin_unlock(&phba->io_sgl_lock);
+			io_task->psgl_handle = NULL;
+		}
+	} else {
+		if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN)
+			return;
+		if (io_task->psgl_handle) {
+			spin_lock(&phba->mgmt_sgl_lock);
+			free_mgmt_sgl_handle(phba, io_task->psgl_handle);
+			spin_unlock(&phba->mgmt_sgl_lock);
+			io_task->psgl_handle = NULL;
+		}
+	}
+}
+
+static int beiscsi_iotask(struct iscsi_task *task, struct scatterlist *sg,
+			  unsigned int num_sg, unsigned int xferlen,
+			  unsigned int writedir)
+{
+
+	struct beiscsi_io_task *io_task = task->dd_data;
+	struct iscsi_conn *conn = task->conn;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct beiscsi_hba *phba = beiscsi_conn->phba;
+	struct iscsi_wrb *pwrb = NULL;
+	unsigned int doorbell = 0;
+
+	pwrb = io_task->pwrb_handle->pwrb;
+	io_task->cmd_bhs->iscsi_hdr.exp_statsn = 0;
+	io_task->bhs_len = sizeof(struct be_cmd_bhs);
+
+	if (writedir) {
+		SE_DEBUG(DBG_LVL_4, " WRITE Command \t");
+		memset(&io_task->cmd_bhs->iscsi_data_pdu, 0, 48);
+		AMAP_SET_BITS(struct amap_pdu_data_out, itt,
+			      &io_task->cmd_bhs->iscsi_data_pdu,
+			      (unsigned int)io_task->cmd_bhs->iscsi_hdr.itt);
+		AMAP_SET_BITS(struct amap_pdu_data_out, opcode,
+			      &io_task->cmd_bhs->iscsi_data_pdu,
+			      ISCSI_OPCODE_SCSI_DATA_OUT);
+		AMAP_SET_BITS(struct amap_pdu_data_out, final_bit,
+			      &io_task->cmd_bhs->iscsi_data_pdu, 1);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_WR_CMD);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
+	} else {
+		SE_DEBUG(DBG_LVL_4, "READ Command \t");
+		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_RD_CMD);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
+	}
+	memcpy(&io_task->cmd_bhs->iscsi_data_pdu.
+	       dw[offsetof(struct amap_pdu_data_out, lun) / 32],
+	       io_task->cmd_bhs->iscsi_hdr.lun, sizeof(struct scsi_lun));
+
+	AMAP_SET_BITS(struct amap_iscsi_wrb, lun, pwrb,
+		      cpu_to_be16((unsigned short)io_task->cmd_bhs->iscsi_hdr.
+				  lun[0]));
+	AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb, xferlen);
+	AMAP_SET_BITS(struct amap_iscsi_wrb, wrb_idx, pwrb,
+		      io_task->pwrb_handle->wrb_index);
+	AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb,
+		      be32_to_cpu(task->cmdsn));
+	AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb,
+		      io_task->psgl_handle->sgl_index);
+
+	hwi_write_sgl(pwrb, sg, num_sg, io_task);
+
+	AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
+		      io_task->pwrb_handle->nxt_wrb_index);
+	be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
+
+	doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
+	doorbell |= (io_task->pwrb_handle->wrb_index &
+		     DB_DEF_PDU_WRB_INDEX_MASK) << DB_DEF_PDU_WRB_INDEX_SHIFT;
+	doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
+
+	iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
+	return 0;
+}
+
+static int beiscsi_mtask(struct iscsi_task *task)
+{
+	struct beiscsi_io_task *aborted_io_task, *io_task = task->dd_data;
+	struct iscsi_conn *conn = task->conn;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct beiscsi_hba *phba = beiscsi_conn->phba;
+	struct iscsi_wrb *pwrb = NULL;
+	unsigned int doorbell = 0;
+	struct iscsi_task *aborted_task;
+
+	pwrb = io_task->pwrb_handle->pwrb;
+	AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb,
+		      be32_to_cpu(task->cmdsn));
+	AMAP_SET_BITS(struct amap_iscsi_wrb, wrb_idx, pwrb,
+		      io_task->pwrb_handle->wrb_index);
+	AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb,
+		      io_task->psgl_handle->sgl_index);
+
+	switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
+	case ISCSI_OP_LOGIN:
+		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, TGT_DM_CMD);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb, 1);
+		hwi_write_buffer(pwrb, task);
+		break;
+	case ISCSI_OP_NOOP_OUT:
+		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_RD_CMD);
+		hwi_write_buffer(pwrb, task);
+		break;
+	case ISCSI_OP_TEXT:
+		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_WR_CMD);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
+		hwi_write_buffer(pwrb, task);
+		break;
+	case ISCSI_OP_SCSI_TMFUNC:
+		aborted_task = iscsi_itt_to_task(conn,
+					((struct iscsi_tm *)task->hdr)->rtt);
+		 if (!aborted_task)
+			return 0;
+		aborted_io_task = aborted_task->dd_data;
+		if (!aborted_io_task->scsi_cmnd)
+			return 0;
+
+		mgmt_invalidate_icds(phba,
+				     aborted_io_task->psgl_handle->sgl_index,
+				     beiscsi_conn->beiscsi_conn_cid);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_TMF_CMD);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+		hwi_write_buffer(pwrb, task);
+		break;
+	case ISCSI_OP_LOGOUT:
+		AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+				HWH_TYPE_LOGOUT);
+		hwi_write_buffer(pwrb, task);
+		break;
+
+	default:
+		SE_DEBUG(DBG_LVL_1, "opcode =%d Not supported \n",
+			 task->hdr->opcode & ISCSI_OPCODE_MASK);
+		return -EINVAL;
+	}
+
+	AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb,
+		      be32_to_cpu(task->data_count));
+	AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
+		      io_task->pwrb_handle->nxt_wrb_index);
+	be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
+
+	doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
+	doorbell |= (io_task->pwrb_handle->wrb_index &
+		     DB_DEF_PDU_WRB_INDEX_MASK) << DB_DEF_PDU_WRB_INDEX_SHIFT;
+	doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
+	iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
+	return 0;
+}
+
+static int beiscsi_task_xmit(struct iscsi_task *task)
+{
+	struct iscsi_conn *conn = task->conn;
+	struct beiscsi_io_task *io_task = task->dd_data;
+	struct scsi_cmnd *sc = task->sc;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct scatterlist *sg;
+	int num_sg;
+	unsigned int  writedir = 0, xferlen = 0;
+
+	SE_DEBUG(DBG_LVL_4, "\n cid=%d In beiscsi_task_xmit task=%p conn=%p \t"
+		 "beiscsi_conn=%p \n", beiscsi_conn->beiscsi_conn_cid,
+		 task, conn, beiscsi_conn);
+	if (!sc)
+		return beiscsi_mtask(task);
+
+	io_task->scsi_cmnd = sc;
+	num_sg = scsi_dma_map(sc);
+	if (num_sg < 0) {
+		SE_DEBUG(DBG_LVL_1, " scsi_dma_map Failed\n")
+		return num_sg;
+	}
+	SE_DEBUG(DBG_LVL_4, "xferlen=0x%08x scmd=%p num_sg=%d sernum=%lu\n",
+		  (scsi_bufflen(sc)), sc, num_sg, sc->serial_number);
+	xferlen = scsi_bufflen(sc);
+	sg = scsi_sglist(sc);
+	if (sc->sc_data_direction == DMA_TO_DEVICE) {
+		writedir = 1;
+		SE_DEBUG(DBG_LVL_4, "task->imm_count=0x%08x \n",
+			 task->imm_count);
+	} else
+		writedir = 0;
+	return beiscsi_iotask(task, sg, num_sg, xferlen, writedir);
+}
+
+static void beiscsi_remove(struct pci_dev *pcidev)
+{
+	struct beiscsi_hba *phba = NULL;
+
+	phba = (struct beiscsi_hba *)pci_get_drvdata(pcidev);
+	if (!phba) {
+		dev_err(&pcidev->dev, "beiscsi_remove called with no phba \n");
+		return;
+	}
+
+	hwi_disable_intr(phba);
+	if (phba->pcidev->irq)
+		free_irq(phba->pcidev->irq, phba);
+	destroy_workqueue(phba->wq);
+	if (blk_iopoll_enabled)
+		blk_iopoll_disable(&phba->iopoll);
+
+	beiscsi_clean_port(phba);
+	beiscsi_free_mem(phba);
+	beiscsi_unmap_pci_function(phba);
+	pci_free_consistent(phba->pcidev,
+			    phba->ctrl.mbox_mem_alloced.size,
+			    phba->ctrl.mbox_mem_alloced.va,
+			    phba->ctrl.mbox_mem_alloced.dma);
+	iscsi_host_remove(phba->shost);
+	pci_dev_put(phba->pcidev);
+	iscsi_host_free(phba->shost);
+}
+
+static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
+				const struct pci_device_id *id)
+{
+	struct beiscsi_hba *phba = NULL;
+	int ret;
+
+	ret = beiscsi_enable_pci(pcidev);
+	if (ret < 0) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+			     "Failed to enable pci device \n");
+		return ret;
+	}
+
+	phba = beiscsi_hba_alloc(pcidev);
+	if (!phba) {
+		dev_err(&pcidev->dev, "beiscsi_dev_probe-"
+			" Failed in beiscsi_hba_alloc \n");
+		goto disable_pci;
+	}
+
+	pci_set_drvdata(pcidev, phba);
+	ret = be_ctrl_init(phba, pcidev);
+	if (ret) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+				"Failed in be_ctrl_init\n");
+		goto hba_free;
+	}
+
+	spin_lock_init(&phba->io_sgl_lock);
+	spin_lock_init(&phba->mgmt_sgl_lock);
+	spin_lock_init(&phba->isr_lock);
+	beiscsi_get_params(phba);
+	ret = beiscsi_init_port(phba);
+	if (ret < 0) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+			     "Failed in beiscsi_init_port\n");
+		goto free_port;
+	}
+
+	snprintf(phba->wq_name, sizeof(phba->wq_name), "beiscsi_q_irq%u",
+		 phba->shost->host_no);
+	phba->wq = create_singlethread_workqueue(phba->wq_name);
+	if (!phba->wq) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+				"Failed to allocate work queue\n");
+		goto free_twq;
+	}
+
+	INIT_WORK(&phba->work_cqs, beiscsi_process_all_cqs);
+
+	if (blk_iopoll_enabled) {
+		blk_iopoll_init(&phba->iopoll, be_iopoll_budget, be_iopoll);
+		blk_iopoll_enable(&phba->iopoll);
+	}
+
+	ret = beiscsi_init_irqs(phba);
+	if (ret < 0) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+			     "Failed to beiscsi_init_irqs\n");
+		goto free_blkenbld;
+	}
+	ret = hwi_enable_intr(phba);
+	if (ret < 0) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+			     "Failed to hwi_enable_intr\n");
+		goto free_ctrlr;
+	}
+
+	SE_DEBUG(DBG_LVL_8, "\n\n\n SUCCESS - DRIVER LOADED \n\n\n");
+	return 0;
+
+free_ctrlr:
+	if (phba->pcidev->irq)
+		free_irq(phba->pcidev->irq, phba);
+free_blkenbld:
+	destroy_workqueue(phba->wq);
+	if (blk_iopoll_enabled)
+		blk_iopoll_disable(&phba->iopoll);
+free_twq:
+	beiscsi_clean_port(phba);
+	beiscsi_free_mem(phba);
+free_port:
+	pci_free_consistent(phba->pcidev,
+			    phba->ctrl.mbox_mem_alloced.size,
+			    phba->ctrl.mbox_mem_alloced.va,
+			   phba->ctrl.mbox_mem_alloced.dma);
+	beiscsi_unmap_pci_function(phba);
+hba_free:
+	iscsi_host_remove(phba->shost);
+	pci_dev_put(phba->pcidev);
+	iscsi_host_free(phba->shost);
+disable_pci:
+	pci_disable_device(pcidev);
+	return ret;
+}
+
+struct iscsi_transport beiscsi_iscsi_transport = {
+	.owner = THIS_MODULE,
+	.name = DRV_NAME,
+	.caps = CAP_RECOVERY_L0 | CAP_HDRDGST |
+		CAP_MULTI_R2T | CAP_DATADGST | CAP_DATA_PATH_OFFLOAD,
+	.param_mask = ISCSI_MAX_RECV_DLENGTH |
+		ISCSI_MAX_XMIT_DLENGTH |
+		ISCSI_HDRDGST_EN |
+		ISCSI_DATADGST_EN |
+		ISCSI_INITIAL_R2T_EN |
+		ISCSI_MAX_R2T |
+		ISCSI_IMM_DATA_EN |
+		ISCSI_FIRST_BURST |
+		ISCSI_MAX_BURST |
+		ISCSI_PDU_INORDER_EN |
+		ISCSI_DATASEQ_INORDER_EN |
+		ISCSI_ERL |
+		ISCSI_CONN_PORT |
+		ISCSI_CONN_ADDRESS |
+		ISCSI_EXP_STATSN |
+		ISCSI_PERSISTENT_PORT |
+		ISCSI_PERSISTENT_ADDRESS |
+		ISCSI_TARGET_NAME | ISCSI_TPGT |
+		ISCSI_USERNAME | ISCSI_PASSWORD |
+		ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
+		ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
+		ISCSI_LU_RESET_TMO |
+		ISCSI_PING_TMO | ISCSI_RECV_TMO |
+		ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
+	.host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
+				ISCSI_HOST_INITIATOR_NAME,
+	.create_session = beiscsi_session_create,
+	.destroy_session = beiscsi_session_destroy,
+	.create_conn = beiscsi_conn_create,
+	.bind_conn = beiscsi_conn_bind,
+	.destroy_conn = iscsi_conn_teardown,
+	.set_param = beiscsi_set_param,
+	.get_conn_param = beiscsi_conn_get_param,
+	.get_session_param = iscsi_session_get_param,
+	.get_host_param = beiscsi_get_host_param,
+	.start_conn = beiscsi_conn_start,
+	.stop_conn = beiscsi_conn_stop,
+	.send_pdu = iscsi_conn_send_pdu,
+	.xmit_task = beiscsi_task_xmit,
+	.cleanup_task = beiscsi_cleanup_task,
+	.alloc_pdu = beiscsi_alloc_pdu,
+	.parse_pdu_itt = beiscsi_parse_pdu,
+	.get_stats = beiscsi_conn_get_stats,
+	.ep_connect = beiscsi_ep_connect,
+	.ep_poll = beiscsi_ep_poll,
+	.ep_disconnect = beiscsi_ep_disconnect,
+	.session_recovery_timedout = iscsi_session_recovery_timedout,
+};
+
+static struct pci_driver beiscsi_pci_driver = {
+	.name = DRV_NAME,
+	.probe = beiscsi_dev_probe,
+	.remove = beiscsi_remove,
+	.id_table = beiscsi_pci_id_table
+};
+
+static int __init beiscsi_module_init(void)
+{
+	int ret;
+
+	beiscsi_scsi_transport =
+			iscsi_register_transport(&beiscsi_iscsi_transport);
+	if (!beiscsi_scsi_transport) {
+		SE_DEBUG(DBG_LVL_1,
+			 "beiscsi_module_init - Unable to  register beiscsi"
+			 "transport.\n");
+		ret = -ENOMEM;
+	}
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_module_init, tt=%p \n",
+		 &beiscsi_iscsi_transport);
+
+	ret = pci_register_driver(&beiscsi_pci_driver);
+	if (ret) {
+		SE_DEBUG(DBG_LVL_1,
+			 "beiscsi_module_init - Unable to  register"
+			 "beiscsi pci driver.\n");
+		goto unregister_iscsi_transport;
+	}
+	return 0;
+
+unregister_iscsi_transport:
+	iscsi_unregister_transport(&beiscsi_iscsi_transport);
+	return ret;
+}
+
+static void __exit beiscsi_module_exit(void)
+{
+	pci_unregister_driver(&beiscsi_pci_driver);
+	iscsi_unregister_transport(&beiscsi_iscsi_transport);
+}
+
+module_init(beiscsi_module_init);
+module_exit(beiscsi_module_exit);
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
new file mode 100644
index 000000000000..53c9b70ac7ac
--- /dev/null
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -0,0 +1,837 @@
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#ifndef _BEISCSI_MAIN_
+#define _BEISCSI_MAIN_
+
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/in.h>
+#include <linux/blk-iopoll.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/iscsi_proto.h>
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+
+#include "be.h"
+
+
+
+#define DRV_NAME		"be2iscsi"
+#define BUILD_STR		"2.0.527.0"
+
+#define BE_NAME			"ServerEngines BladeEngine2" \
+				"Linux iSCSI Driver version" BUILD_STR
+#define DRV_DESC		BE_NAME " " "Driver"
+
+#define BE_VENDOR_ID 		0x19A2
+#define BE_DEVICE_ID1		0x212
+#define OC_DEVICE_ID1		0x702
+#define OC_DEVICE_ID2		0x703
+
+#define BE2_MAX_SESSIONS	64
+#define BE2_CMDS_PER_CXN	128
+#define BE2_LOGOUTS		BE2_MAX_SESSIONS
+#define BE2_TMFS		16
+#define BE2_NOPOUT_REQ		16
+#define BE2_ASYNCPDUS		BE2_MAX_SESSIONS
+#define BE2_MAX_ICDS		2048
+#define BE2_SGE			32
+#define BE2_DEFPDU_HDR_SZ	64
+#define BE2_DEFPDU_DATA_SZ	8192
+#define BE2_IO_DEPTH \
+	(BE2_MAX_ICDS / 2 - (BE2_LOGOUTS + BE2_TMFS + BE2_NOPOUT_REQ))
+
+#define BEISCSI_SGLIST_ELEMENTS	BE2_SGE
+
+#define BEISCSI_MAX_CMNDS	1024	/* Max IO's per Ctrlr sht->can_queue */
+#define BEISCSI_CMD_PER_LUN	128	/* scsi_host->cmd_per_lun */
+#define BEISCSI_MAX_SECTORS	2048	/* scsi_host->max_sectors */
+
+#define BEISCSI_MAX_CMD_LEN	16	/* scsi_host->max_cmd_len */
+#define BEISCSI_NUM_MAX_LUN	256	/* scsi_host->max_lun */
+#define BEISCSI_NUM_DEVICES_SUPPORTED	0x01
+#define BEISCSI_MAX_FRAGS_INIT	192
+#define BE_NUM_MSIX_ENTRIES 	1
+#define MPU_EP_SEMAPHORE 	0xac
+
+#define BE_SENSE_INFO_SIZE		258
+#define BE_ISCSI_PDU_HEADER_SIZE	64
+#define BE_MIN_MEM_SIZE			16384
+
+#define IIOC_SCSI_DATA                  0x05	/* Write Operation */
+
+#define DBG_LVL				0x00000001
+#define DBG_LVL_1			0x00000001
+#define DBG_LVL_2			0x00000002
+#define DBG_LVL_3			0x00000004
+#define DBG_LVL_4			0x00000008
+#define DBG_LVL_5			0x00000010
+#define DBG_LVL_6			0x00000020
+#define DBG_LVL_7			0x00000040
+#define DBG_LVL_8			0x00000080
+
+#define SE_DEBUG(debug_mask, fmt, args...)		\
+do {							\
+	if (debug_mask & DBG_LVL) {			\
+		printk(KERN_ERR "(%s():%d):", __func__, __LINE__);\
+		printk(fmt, ##args);			\
+	}						\
+} while (0);
+
+/**
+ * hardware needs the async PDU buffers to be posted in multiples of 8
+ * So have atleast 8 of them by default
+ */
+
+#define HWI_GET_ASYNC_PDU_CTX(phwi)	(phwi->phwi_ctxt->pasync_ctx)
+
+/********* Memory BAR register ************/
+#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 	0xfc
+/**
+ * Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt
+ * Disable" may still globally block interrupts in addition to individual
+ * interrupt masks; a mechanism for the device driver to block all interrupts
+ * atomically without having to arbitrate for the PCI Interrupt Disable bit
+ * with the OS.
+ */
+#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK	(1 << 29)	/* bit 29 */
+
+/********* ISR0 Register offset **********/
+#define CEV_ISR0_OFFSET 			0xC18
+#define CEV_ISR_SIZE				4
+
+/**
+ * Macros for reading/writing a protection domain or CSR registers
+ * in BladeEngine.
+ */
+
+#define DB_TXULP0_OFFSET 0x40
+#define DB_RXULP0_OFFSET 0xA0
+/********* Event Q door bell *************/
+#define DB_EQ_OFFSET			DB_CQ_OFFSET
+#define DB_EQ_RING_ID_MASK		0x1FF	/* bits 0 - 8 */
+/* Clear the interrupt for this eq */
+#define DB_EQ_CLR_SHIFT			(9)	/* bit 9 */
+/* Must be 1 */
+#define DB_EQ_EVNT_SHIFT		(10)	/* bit 10 */
+/* Number of event entries processed */
+#define DB_EQ_NUM_POPPED_SHIFT		(16)	/* bits 16 - 28 */
+/* Rearm bit */
+#define DB_EQ_REARM_SHIFT		(29)	/* bit 29 */
+
+/********* Compl Q door bell *************/
+#define DB_CQ_OFFSET 			0x120
+#define DB_CQ_RING_ID_MASK		0x3FF	/* bits 0 - 9 */
+/* Number of event entries processed */
+#define DB_CQ_NUM_POPPED_SHIFT		(16) 	/* bits 16 - 28 */
+/* Rearm bit */
+#define DB_CQ_REARM_SHIFT		(29) 	/* bit 29 */
+
+#define GET_HWI_CONTROLLER_WS(pc)	(pc->phwi_ctrlr)
+#define HWI_GET_DEF_BUFQ_ID(pc) (((struct hwi_controller *)\
+		(GET_HWI_CONTROLLER_WS(pc)))->default_pdu_data.id)
+#define HWI_GET_DEF_HDRQ_ID(pc) (((struct hwi_controller *)\
+		(GET_HWI_CONTROLLER_WS(pc)))->default_pdu_hdr.id)
+
+#define PAGES_REQUIRED(x) \
+	((x < PAGE_SIZE) ? 1 :  ((x + PAGE_SIZE - 1) / PAGE_SIZE))
+
+enum be_mem_enum {
+	HWI_MEM_ADDN_CONTEXT,
+	HWI_MEM_CQ,
+	HWI_MEM_EQ,
+	HWI_MEM_WRB,
+	HWI_MEM_WRBH,
+	HWI_MEM_SGLH,	/* 5 */
+	HWI_MEM_SGE,
+	HWI_MEM_ASYNC_HEADER_BUF,
+	HWI_MEM_ASYNC_DATA_BUF,
+	HWI_MEM_ASYNC_HEADER_RING,
+	HWI_MEM_ASYNC_DATA_RING,	/* 10 */
+	HWI_MEM_ASYNC_HEADER_HANDLE,
+	HWI_MEM_ASYNC_DATA_HANDLE,
+	HWI_MEM_ASYNC_PDU_CONTEXT,
+	ISCSI_MEM_GLOBAL_HEADER,
+	SE_MEM_MAX  	/* 15 */
+};
+
+struct be_bus_address32 {
+	unsigned int address_lo;
+	unsigned int address_hi;
+};
+
+struct be_bus_address64 {
+	unsigned long long address;
+};
+
+struct be_bus_address {
+	union {
+		struct be_bus_address32 a32;
+		struct be_bus_address64 a64;
+	} u;
+};
+
+struct mem_array {
+	struct be_bus_address bus_address;	/* Bus address of location */
+	void *virtual_address;		/* virtual address to the location */
+	unsigned int size;		/* Size required by memory block */
+};
+
+struct be_mem_descriptor {
+	unsigned int index;	/* Index of this memory parameter */
+	unsigned int category;	/* type indicates cached/non-cached */
+	unsigned int num_elements;	/* number of elements in this
+					 * descriptor
+					 */
+	unsigned int alignment_mask;	/* Alignment mask for this block */
+	unsigned int size_in_bytes;	/* Size required by memory block */
+	struct mem_array *mem_array;
+};
+
+struct sgl_handle {
+	unsigned int sgl_index;
+	struct iscsi_sge *pfrag;
+};
+
+struct hba_parameters {
+	unsigned int ios_per_ctrl;
+	unsigned int cxns_per_ctrl;
+	unsigned int asyncpdus_per_ctrl;
+	unsigned int icds_per_ctrl;
+	unsigned int num_sge_per_io;
+	unsigned int defpdu_hdr_sz;
+	unsigned int defpdu_data_sz;
+	unsigned int num_cq_entries;
+	unsigned int num_eq_entries;
+	unsigned int wrbs_per_cxn;
+	unsigned int crashmode;
+	unsigned int hba_num;
+
+	unsigned int mgmt_ws_sz;
+	unsigned int hwi_ws_sz;
+
+	unsigned int eto;
+	unsigned int ldto;
+
+	unsigned int dbg_flags;
+	unsigned int num_cxn;
+
+	unsigned int eq_timer;
+	/**
+	 * These are calculated from other params. They're here
+	 * for debug purposes
+	 */
+	unsigned int num_mcc_pages;
+	unsigned int num_mcc_cq_pages;
+	unsigned int num_cq_pages;
+	unsigned int num_eq_pages;
+
+	unsigned int num_async_pdu_buf_pages;
+	unsigned int num_async_pdu_buf_sgl_pages;
+	unsigned int num_async_pdu_buf_cq_pages;
+
+	unsigned int num_async_pdu_hdr_pages;
+	unsigned int num_async_pdu_hdr_sgl_pages;
+	unsigned int num_async_pdu_hdr_cq_pages;
+
+	unsigned int num_sge;
+};
+
+struct beiscsi_hba {
+	struct hba_parameters params;
+	struct hwi_controller *phwi_ctrlr;
+	unsigned int mem_req[SE_MEM_MAX];
+	/* PCI BAR mapped addresses */
+	u8 __iomem *csr_va;	/* CSR */
+	u8 __iomem *db_va;	/* Door  Bell  */
+	u8 __iomem *pci_va;	/* PCI Config */
+	struct be_bus_address csr_pa;	/* CSR */
+	struct be_bus_address db_pa;	/* CSR */
+	struct be_bus_address pci_pa;	/* CSR */
+	/* PCI representation of our HBA */
+	struct pci_dev *pcidev;
+	unsigned int state;
+	unsigned short asic_revision;
+	struct blk_iopoll	iopoll;
+	struct be_mem_descriptor *init_mem;
+
+	unsigned short io_sgl_alloc_index;
+	unsigned short io_sgl_free_index;
+	unsigned short io_sgl_hndl_avbl;
+	struct sgl_handle **io_sgl_hndl_base;
+
+	unsigned short eh_sgl_alloc_index;
+	unsigned short eh_sgl_free_index;
+	unsigned short eh_sgl_hndl_avbl;
+	struct sgl_handle **eh_sgl_hndl_base;
+	spinlock_t io_sgl_lock;
+	spinlock_t mgmt_sgl_lock;
+	spinlock_t isr_lock;
+	unsigned int age;
+	unsigned short avlbl_cids;
+	unsigned short cid_alloc;
+	unsigned short cid_free;
+	struct beiscsi_conn *conn_table[BE2_MAX_SESSIONS * 2];
+	struct list_head hba_queue;
+	unsigned short *cid_array;
+	struct iscsi_endpoint **ep_array;
+	struct Scsi_Host *shost;
+	struct {
+		/**
+		 * group together since they are used most frequently
+		 * for cid to cri conversion
+		 */
+		unsigned int iscsi_cid_start;
+		unsigned int phys_port;
+
+		unsigned int isr_offset;
+		unsigned int iscsi_icd_start;
+		unsigned int iscsi_cid_count;
+		unsigned int iscsi_icd_count;
+		unsigned int pci_function;
+
+		unsigned short cid_alloc;
+		unsigned short cid_free;
+		unsigned short avlbl_cids;
+		spinlock_t cid_lock;
+	} fw_config;
+
+	u8 mac_address[ETH_ALEN];
+	unsigned short todo_cq;
+	unsigned short todo_mcc_cq;
+	char wq_name[20];
+	struct workqueue_struct *wq;	/* The actuak work queue */
+	struct work_struct work_cqs;	/* The work being queued */
+	struct be_ctrl_info ctrl;
+};
+
+struct beiscsi_session {
+	struct pci_pool *bhs_pool;
+};
+
+/**
+ * struct beiscsi_conn - iscsi connection structure
+ */
+struct beiscsi_conn {
+	struct iscsi_conn *conn;
+	struct beiscsi_hba *phba;
+	u32 exp_statsn;
+	u32 beiscsi_conn_cid;
+	struct beiscsi_endpoint *ep;
+	unsigned short login_in_progress;
+	struct sgl_handle *plogin_sgl_handle;
+	struct beiscsi_session *beiscsi_sess;
+};
+
+/* This structure is used by the chip */
+struct pdu_data_out {
+	u32 dw[12];
+};
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_pdu_data_out {
+	u8 opcode[6];		/* opcode */
+	u8 rsvd0[2];		/* should be 0 */
+	u8 rsvd1[7];
+	u8 final_bit;		/* F bit */
+	u8 rsvd2[16];
+	u8 ahs_length[8];	/* no AHS */
+	u8 data_len_hi[8];
+	u8 data_len_lo[16];	/* DataSegmentLength */
+	u8 lun[64];
+	u8 itt[32];		/* ITT; initiator task tag */
+	u8 ttt[32];		/* TTT; valid for R2T or 0xffffffff */
+	u8 rsvd3[32];
+	u8 exp_stat_sn[32];
+	u8 rsvd4[32];
+	u8 data_sn[32];
+	u8 buffer_offset[32];
+	u8 rsvd5[32];
+};
+
+struct be_cmd_bhs {
+	struct iscsi_cmd iscsi_hdr;
+	unsigned char pad1[16];
+	struct pdu_data_out iscsi_data_pdu;
+	unsigned char pad2[BE_SENSE_INFO_SIZE -
+			sizeof(struct pdu_data_out)];
+};
+
+struct beiscsi_io_task {
+	struct wrb_handle *pwrb_handle;
+	struct sgl_handle *psgl_handle;
+	struct beiscsi_conn *conn;
+	struct scsi_cmnd *scsi_cmnd;
+	unsigned int cmd_sn;
+	unsigned int flags;
+	unsigned short cid;
+	unsigned short header_len;
+
+	struct be_cmd_bhs *cmd_bhs;
+	struct be_bus_address bhs_pa;
+	unsigned short bhs_len;
+};
+
+struct be_nonio_bhs {
+	struct iscsi_hdr iscsi_hdr;
+	unsigned char pad1[16];
+	struct pdu_data_out iscsi_data_pdu;
+	unsigned char pad2[BE_SENSE_INFO_SIZE -
+			sizeof(struct pdu_data_out)];
+};
+
+struct be_status_bhs {
+	struct iscsi_cmd iscsi_hdr;
+	unsigned char pad1[16];
+	/**
+	 * The plus 2 below is to hold the sense info length that gets
+	 * DMA'ed by RxULP
+	 */
+	unsigned char sense_info[BE_SENSE_INFO_SIZE];
+};
+
+struct iscsi_sge {
+	u32 dw[4];
+};
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_iscsi_sge {
+	u8 addr_hi[32];
+	u8 addr_lo[32];
+	u8 sge_offset[22];	/* DWORD 2 */
+	u8 rsvd0[9];		/* DWORD 2 */
+	u8 last_sge;		/* DWORD 2 */
+	u8 len[17];		/* DWORD 3 */
+	u8 rsvd1[15];		/* DWORD 3 */
+};
+
+struct beiscsi_offload_params {
+	u32 dw[5];
+};
+
+#define OFFLD_PARAMS_ERL	0x00000003
+#define OFFLD_PARAMS_DDE	0x00000004
+#define OFFLD_PARAMS_HDE	0x00000008
+#define OFFLD_PARAMS_IR2T	0x00000010
+#define OFFLD_PARAMS_IMD	0x00000020
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_beiscsi_offload_params {
+	u8 max_burst_length[32];
+	u8 max_send_data_segment_length[32];
+	u8 first_burst_length[32];
+	u8 erl[2];
+	u8 dde[1];
+	u8 hde[1];
+	u8 ir2t[1];
+	u8 imd[1];
+	u8 pad[26];
+	u8 exp_statsn[32];
+};
+
+/* void hwi_complete_drvr_msgs(struct beiscsi_conn *beiscsi_conn,
+		struct beiscsi_hba *phba, struct sol_cqe *psol);*/
+
+struct async_pdu_handle {
+	struct list_head link;
+	struct be_bus_address pa;
+	void *pbuffer;
+	unsigned int consumed;
+	unsigned char index;
+	unsigned char is_header;
+	unsigned short cri;
+	unsigned long buffer_len;
+};
+
+struct hwi_async_entry {
+	struct {
+		unsigned char hdr_received;
+		unsigned char hdr_len;
+		unsigned short bytes_received;
+		unsigned int bytes_needed;
+		struct list_head list;
+	} wait_queue;
+
+	struct list_head header_busy_list;
+	struct list_head data_busy_list;
+};
+
+#define BE_MIN_ASYNC_ENTRIES 128
+
+struct hwi_async_pdu_context {
+	struct {
+		struct be_bus_address pa_base;
+		void *va_base;
+		void *ring_base;
+		struct async_pdu_handle *handle_base;
+
+		unsigned int host_write_ptr;
+		unsigned int ep_read_ptr;
+		unsigned int writables;
+
+		unsigned int free_entries;
+		unsigned int busy_entries;
+		unsigned int buffer_size;
+		unsigned int num_entries;
+
+		struct list_head free_list;
+	} async_header;
+
+	struct {
+		struct be_bus_address pa_base;
+		void *va_base;
+		void *ring_base;
+		struct async_pdu_handle *handle_base;
+
+		unsigned int host_write_ptr;
+		unsigned int ep_read_ptr;
+		unsigned int writables;
+
+		unsigned int free_entries;
+		unsigned int busy_entries;
+		unsigned int buffer_size;
+		struct list_head free_list;
+		unsigned int num_entries;
+	} async_data;
+
+	/**
+	 * This is a varying size list! Do not add anything
+	 * after this entry!!
+	 */
+	struct hwi_async_entry async_entry[BE_MIN_ASYNC_ENTRIES];
+};
+
+#define PDUCQE_CODE_MASK	0x0000003F
+#define PDUCQE_DPL_MASK		0xFFFF0000
+#define PDUCQE_INDEX_MASK	0x0000FFFF
+
+struct i_t_dpdu_cqe {
+	u32 dw[4];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_i_t_dpdu_cqe {
+	u8 db_addr_hi[32];
+	u8 db_addr_lo[32];
+	u8 code[6];
+	u8 cid[10];
+	u8 dpl[16];
+	u8 index[16];
+	u8 num_cons[10];
+	u8 rsvd0[4];
+	u8 final;
+	u8 valid;
+} __packed;
+
+#define CQE_VALID_MASK	0x80000000
+#define CQE_CODE_MASK	0x0000003F
+#define CQE_CID_MASK	0x0000FFC0
+
+#define EQE_VALID_MASK		0x00000001
+#define EQE_MAJORCODE_MASK	0x0000000E
+#define EQE_RESID_MASK		0xFFFF0000
+
+struct be_eq_entry {
+	u32 dw[1];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_eq_entry {
+	u8 valid;		/* DWORD 0 */
+	u8 major_code[3];	/* DWORD 0 */
+	u8 minor_code[12];	/* DWORD 0 */
+	u8 resource_id[16];	/* DWORD 0 */
+
+} __packed;
+
+struct cq_db {
+	u32 dw[1];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_cq_db {
+	u8 qid[10];
+	u8 event[1];
+	u8 rsvd0[5];
+	u8 num_popped[13];
+	u8 rearm[1];
+	u8 rsvd1[2];
+} __packed;
+
+void beiscsi_process_eq(struct beiscsi_hba *phba);
+
+
+struct iscsi_wrb {
+	u32 dw[16];
+} __packed;
+
+#define WRB_TYPE_MASK 0xF0000000
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_iscsi_wrb {
+	u8 lun[14];		/* DWORD 0 */
+	u8 lt;			/* DWORD 0 */
+	u8 invld;		/* DWORD 0 */
+	u8 wrb_idx[8];		/* DWORD 0 */
+	u8 dsp;			/* DWORD 0 */
+	u8 dmsg;		/* DWORD 0 */
+	u8 undr_run;		/* DWORD 0 */
+	u8 over_run;		/* DWORD 0 */
+	u8 type[4];		/* DWORD 0 */
+	u8 ptr2nextwrb[8];	/* DWORD 1 */
+	u8 r2t_exp_dtl[24];	/* DWORD 1 */
+	u8 sgl_icd_idx[12];	/* DWORD 2 */
+	u8 rsvd0[20];		/* DWORD 2 */
+	u8 exp_data_sn[32];	/* DWORD 3 */
+	u8 iscsi_bhs_addr_hi[32];	/* DWORD 4 */
+	u8 iscsi_bhs_addr_lo[32];	/* DWORD 5 */
+	u8 cmdsn_itt[32];	/* DWORD 6 */
+	u8 dif_ref_tag[32];	/* DWORD 7 */
+	u8 sge0_addr_hi[32];	/* DWORD 8 */
+	u8 sge0_addr_lo[32];	/* DWORD 9  */
+	u8 sge0_offset[22];	/* DWORD 10 */
+	u8 pbs;			/* DWORD 10 */
+	u8 dif_mode[2];		/* DWORD 10 */
+	u8 rsvd1[6];		/* DWORD 10 */
+	u8 sge0_last;		/* DWORD 10 */
+	u8 sge0_len[17];	/* DWORD 11 */
+	u8 dif_meta_tag[14];	/* DWORD 11 */
+	u8 sge0_in_ddr;		/* DWORD 11 */
+	u8 sge1_addr_hi[32];	/* DWORD 12 */
+	u8 sge1_addr_lo[32];	/* DWORD 13 */
+	u8 sge1_r2t_offset[22];	/* DWORD 14 */
+	u8 rsvd2[9];		/* DWORD 14 */
+	u8 sge1_last;		/* DWORD 14 */
+	u8 sge1_len[17];	/* DWORD 15 */
+	u8 ref_sgl_icd_idx[12];	/* DWORD 15 */
+	u8 rsvd3[2];		/* DWORD 15 */
+	u8 sge1_in_ddr;		/* DWORD 15 */
+
+} __packed;
+
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
+				    int index);
+void
+free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle);
+
+struct pdu_nop_out {
+	u32 dw[12];
+};
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_pdu_nop_out {
+	u8 opcode[6];		/* opcode 0x00 */
+	u8 i_bit;		/* I Bit */
+	u8 x_bit;		/* reserved; should be 0 */
+	u8 fp_bit_filler1[7];
+	u8 f_bit;		/* always 1 */
+	u8 reserved1[16];
+	u8 ahs_length[8];	/* no AHS */
+	u8 data_len_hi[8];
+	u8 data_len_lo[16];	/* DataSegmentLength */
+	u8 lun[64];
+	u8 itt[32];		/* initiator id for ping or 0xffffffff */
+	u8 ttt[32];		/* target id for ping or 0xffffffff */
+	u8 cmd_sn[32];
+	u8 exp_stat_sn[32];
+	u8 reserved5[128];
+};
+
+#define PDUBASE_OPCODE_MASK	0x0000003F
+#define PDUBASE_DATALENHI_MASK	0x0000FF00
+#define PDUBASE_DATALENLO_MASK	0xFFFF0000
+
+struct pdu_base {
+	u32 dw[16];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_pdu_base {
+	u8 opcode[6];
+	u8 i_bit;		/* immediate bit */
+	u8 x_bit;		/* reserved, always 0 */
+	u8 reserved1[24];	/* opcode-specific fields */
+	u8 ahs_length[8];	/* length units is 4 byte words */
+	u8 data_len_hi[8];
+	u8 data_len_lo[16];	/* DatasegmentLength */
+	u8 lun[64];		/* lun or opcode-specific fields */
+	u8 itt[32];		/* initiator task tag */
+	u8 reserved4[224];
+};
+
+struct iscsi_target_context_update_wrb {
+	u32 dw[16];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_iscsi_target_context_update_wrb {
+	u8 lun[14];		/* DWORD 0 */
+	u8 lt;			/* DWORD 0 */
+	u8 invld;		/* DWORD 0 */
+	u8 wrb_idx[8];		/* DWORD 0 */
+	u8 dsp;			/* DWORD 0 */
+	u8 dmsg;		/* DWORD 0 */
+	u8 undr_run;		/* DWORD 0 */
+	u8 over_run;		/* DWORD 0 */
+	u8 type[4];		/* DWORD 0 */
+	u8 ptr2nextwrb[8];	/* DWORD 1 */
+	u8 max_burst_length[19];	/* DWORD 1 */
+	u8 rsvd0[5];		/* DWORD 1 */
+	u8 rsvd1[15];		/* DWORD 2 */
+	u8 max_send_data_segment_length[17];	/* DWORD 2 */
+	u8 first_burst_length[14];	/* DWORD 3 */
+	u8 rsvd2[2];		/* DWORD 3 */
+	u8 tx_wrbindex_drv_msg[8];	/* DWORD 3 */
+	u8 rsvd3[5];		/* DWORD 3 */
+	u8 session_state[3];	/* DWORD 3 */
+	u8 rsvd4[16];		/* DWORD 4 */
+	u8 tx_jumbo;		/* DWORD 4 */
+	u8 hde;			/* DWORD 4 */
+	u8 dde;			/* DWORD 4 */
+	u8 erl[2];		/* DWORD 4 */
+	u8 domain_id[5];		/* DWORD 4 */
+	u8 mode;		/* DWORD 4 */
+	u8 imd;			/* DWORD 4 */
+	u8 ir2t;		/* DWORD 4 */
+	u8 notpredblq[2];	/* DWORD 4 */
+	u8 compltonack;		/* DWORD 4 */
+	u8 stat_sn[32];		/* DWORD 5 */
+	u8 pad_buffer_addr_hi[32];	/* DWORD 6 */
+	u8 pad_buffer_addr_lo[32];	/* DWORD 7 */
+	u8 pad_addr_hi[32];	/* DWORD 8 */
+	u8 pad_addr_lo[32];	/* DWORD 9 */
+	u8 rsvd5[32];		/* DWORD 10 */
+	u8 rsvd6[32];		/* DWORD 11 */
+	u8 rsvd7[32];		/* DWORD 12 */
+	u8 rsvd8[32];		/* DWORD 13 */
+	u8 rsvd9[32];		/* DWORD 14 */
+	u8 rsvd10[32];		/* DWORD 15 */
+
+} __packed;
+
+struct be_ring {
+	u32 pages;		/* queue size in pages */
+	u32 id;			/* queue id assigned by beklib */
+	u32 num;		/* number of elements in queue */
+	u32 cidx;		/* consumer index */
+	u32 pidx;		/* producer index -- not used by most rings */
+	u32 item_size;		/* size in bytes of one object */
+
+	void *va;		/* The virtual address of the ring.  This
+				 * should be last to allow 32 & 64 bit debugger
+				 * extensions to work.
+				 */
+};
+
+struct hwi_wrb_context {
+	struct list_head wrb_handle_list;
+	struct list_head wrb_handle_drvr_list;
+	struct wrb_handle **pwrb_handle_base;
+	struct wrb_handle **pwrb_handle_basestd;
+	struct iscsi_wrb *plast_wrb;
+	unsigned short alloc_index;
+	unsigned short free_index;
+	unsigned short wrb_handles_available;
+	unsigned short cid;
+};
+
+struct hwi_controller {
+	struct list_head io_sgl_list;
+	struct list_head eh_sgl_list;
+	struct sgl_handle *psgl_handle_base;
+	unsigned int wrb_mem_index;
+
+	struct hwi_wrb_context wrb_context[BE2_MAX_SESSIONS * 2];
+	struct mcc_wrb *pmcc_wrb_base;
+	struct be_ring default_pdu_hdr;
+	struct be_ring default_pdu_data;
+	struct hwi_context_memory *phwi_ctxt;
+	unsigned short cq_errors[CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN];
+};
+
+enum hwh_type_enum {
+	HWH_TYPE_IO = 1,
+	HWH_TYPE_LOGOUT = 2,
+	HWH_TYPE_TMF = 3,
+	HWH_TYPE_NOP = 4,
+	HWH_TYPE_IO_RD = 5,
+	HWH_TYPE_LOGIN = 11,
+	HWH_TYPE_INVALID = 0xFFFFFFFF
+};
+
+struct wrb_handle {
+	enum hwh_type_enum type;
+	unsigned short wrb_index;
+	unsigned short nxt_wrb_index;
+
+	struct iscsi_task *pio_handle;
+	struct iscsi_wrb *pwrb;
+};
+
+struct hwi_context_memory {
+	struct be_eq_obj be_eq;
+	struct be_queue_info be_cq;
+	struct be_queue_info be_mcc_cq;
+	struct be_queue_info be_mcc;
+
+	struct be_queue_info be_def_hdrq;
+	struct be_queue_info be_def_dataq;
+
+	struct be_queue_info be_wrbq[BE2_MAX_SESSIONS];
+	struct be_mcc_wrb_context *pbe_mcc_context;
+
+	struct hwi_async_pdu_context *pasync_ctx;
+};
+
+#endif
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
new file mode 100644
index 000000000000..12e644fc746e
--- /dev/null
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -0,0 +1,321 @@
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#include "be_mgmt.h"
+#include "be_iscsi.h"
+
+unsigned char mgmt_get_fw_config(struct be_ctrl_info *ctrl,
+				struct beiscsi_hba *phba)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_fw_cfg *req = embedded_payload(wrb);
+	int status = 0;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			   OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
+
+	status = be_mbox_notify(ctrl);
+	if (!status) {
+		struct be_fw_cfg *pfw_cfg;
+		pfw_cfg = req;
+		phba->fw_config.phys_port = pfw_cfg->phys_port;
+		phba->fw_config.iscsi_icd_start =
+					pfw_cfg->ulp[0].icd_base;
+		phba->fw_config.iscsi_icd_count =
+					pfw_cfg->ulp[0].icd_count;
+		phba->fw_config.iscsi_cid_start =
+					pfw_cfg->ulp[0].sq_base;
+		phba->fw_config.iscsi_cid_count =
+					pfw_cfg->ulp[0].sq_count;
+	} else {
+		shost_printk(KERN_WARNING, phba->shost,
+			     "Failed in mgmt_get_fw_config \n");
+	}
+
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+unsigned char mgmt_check_supported_fw(struct be_ctrl_info *ctrl)
+{
+	struct be_dma_mem nonemb_cmd;
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_mgmt_controller_attributes *req;
+	struct be_sge *sge = nonembedded_sgl(wrb);
+	int status = 0;
+
+	nonemb_cmd.va = pci_alloc_consistent(ctrl->pdev,
+				sizeof(struct be_mgmt_controller_attributes),
+				&nonemb_cmd.dma);
+	if (nonemb_cmd.va == NULL) {
+		SE_DEBUG(DBG_LVL_1,
+			 "Failed to allocate memory for mgmt_check_supported_fw"
+			 "\n");
+		return -1;
+	}
+	nonemb_cmd.size = sizeof(struct be_mgmt_controller_attributes);
+	req = nonemb_cmd.va;
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			   OPCODE_COMMON_GET_CNTL_ATTRIBUTES, sizeof(*req));
+	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd.dma));
+	sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(nonemb_cmd.size);
+
+	status = be_mbox_notify(ctrl);
+	if (!status) {
+		struct be_mgmt_controller_attributes_resp *resp = nonemb_cmd.va;
+		SE_DEBUG(DBG_LVL_8, "Firmware version of CMD: %s\n",
+			resp->params.hba_attribs.flashrom_version_string);
+		SE_DEBUG(DBG_LVL_8, "Firmware version is : %s\n",
+			resp->params.hba_attribs.firmware_version_string);
+		SE_DEBUG(DBG_LVL_8,
+			"Developer Build, not performing version check...\n");
+
+	} else
+		SE_DEBUG(DBG_LVL_1, " Failed in mgmt_check_supported_fw\n");
+	if (nonemb_cmd.va)
+		pci_free_consistent(ctrl->pdev, nonemb_cmd.size,
+				    nonemb_cmd.va, nonemb_cmd.dma);
+
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+unsigned char mgmt_epfw_cleanup(struct beiscsi_hba *phba, unsigned short chute)
+{
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct iscsi_cleanup_req *req = embedded_payload(wrb);
+	int status = 0;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+			   OPCODE_COMMON_ISCSI_CLEANUP, sizeof(*req));
+
+	req->chute = chute;
+	req->hdr_ring_id = 0;
+	req->data_ring_id = 0;
+
+	status = be_mbox_notify(ctrl);
+	if (status)
+		shost_printk(KERN_WARNING, phba->shost,
+			     " mgmt_epfw_cleanup , FAILED\n");
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+unsigned char mgmt_invalidate_icds(struct beiscsi_hba *phba,
+				   unsigned int icd, unsigned int cid)
+{
+	struct be_dma_mem nonemb_cmd;
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_sge *sge = nonembedded_sgl(wrb);
+	struct invalidate_commands_params_in *req;
+	int status = 0;
+
+	nonemb_cmd.va = pci_alloc_consistent(ctrl->pdev,
+				sizeof(struct invalidate_commands_params_in),
+				&nonemb_cmd.dma);
+	if (nonemb_cmd.va == NULL) {
+		SE_DEBUG(DBG_LVL_1,
+			 "Failed to allocate memory for"
+			 "mgmt_invalidate_icds \n");
+		return -1;
+	}
+	nonemb_cmd.size = sizeof(struct invalidate_commands_params_in);
+	req = nonemb_cmd.va;
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+			OPCODE_COMMON_ISCSI_ERROR_RECOVERY_INVALIDATE_COMMANDS,
+			sizeof(*req));
+	req->ref_handle = 0;
+	req->cleanup_type = CMD_ISCSI_COMMAND_INVALIDATE;
+	req->icd_count = 0;
+	req->table[req->icd_count].icd = icd;
+	req->table[req->icd_count].cid = cid;
+	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd.dma));
+	sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(nonemb_cmd.size);
+
+	status = be_mbox_notify(ctrl);
+	if (status)
+		SE_DEBUG(DBG_LVL_1, "ICDS Invalidation Failed\n");
+	spin_unlock(&ctrl->mbox_lock);
+	if (nonemb_cmd.va)
+		pci_free_consistent(ctrl->pdev, nonemb_cmd.size,
+				    nonemb_cmd.va, nonemb_cmd.dma);
+	return status;
+}
+
+unsigned char mgmt_invalidate_connection(struct beiscsi_hba *phba,
+					 struct beiscsi_endpoint *beiscsi_ep,
+					 unsigned short cid,
+					 unsigned short issue_reset,
+					 unsigned short savecfg_flag)
+{
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct iscsi_invalidate_connection_params_in *req =
+						embedded_payload(wrb);
+	int status = 0;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI_INI,
+			   OPCODE_ISCSI_INI_DRIVER_INVALIDATE_CONNECTION,
+			   sizeof(*req));
+	req->session_handle = beiscsi_ep->fw_handle;
+	req->cid = cid;
+	if (issue_reset)
+		req->cleanup_type = CMD_ISCSI_CONNECTION_ISSUE_TCP_RST;
+	else
+		req->cleanup_type = CMD_ISCSI_CONNECTION_INVALIDATE;
+	req->save_cfg = savecfg_flag;
+	status = be_mbox_notify(ctrl);
+	if (status)
+		SE_DEBUG(DBG_LVL_1, "Invalidation Failed\n");
+
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+unsigned char mgmt_upload_connection(struct beiscsi_hba *phba,
+				unsigned short cid, unsigned int upload_flag)
+{
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct tcp_upload_params_in *req = embedded_payload(wrb);
+	int status = 0;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_cmd_hdr_prepare(&req->hdr, CMD_COMMON_TCP_UPLOAD,
+			   OPCODE_COMMON_TCP_UPLOAD, sizeof(*req));
+	req->id = (unsigned short)cid;
+	req->upload_type = (unsigned char)upload_flag;
+	status = be_mbox_notify(ctrl);
+	if (status)
+		SE_DEBUG(DBG_LVL_1, "mgmt_upload_connection Failed\n");
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+int mgmt_open_connection(struct beiscsi_hba *phba,
+			 struct sockaddr *dst_addr,
+			 struct beiscsi_endpoint *beiscsi_ep)
+{
+	struct hwi_controller *phwi_ctrlr;
+	struct hwi_context_memory *phwi_context;
+	struct sockaddr_in *daddr_in = (struct sockaddr_in *)dst_addr;
+	struct sockaddr_in6 *daddr_in6 = (struct sockaddr_in6 *)dst_addr;
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct tcp_connect_and_offload_in *req = embedded_payload(wrb);
+	unsigned short def_hdr_id;
+	unsigned short def_data_id;
+	struct phys_addr template_address = { 0, 0 };
+	struct phys_addr *ptemplate_address;
+	int status = 0;
+	unsigned short cid = beiscsi_ep->ep_cid;
+
+	phwi_ctrlr = phba->phwi_ctrlr;
+	phwi_context = phwi_ctrlr->phwi_ctxt;
+	def_hdr_id = (unsigned short)HWI_GET_DEF_HDRQ_ID(phba);
+	def_data_id = (unsigned short)HWI_GET_DEF_BUFQ_ID(phba);
+
+	ptemplate_address = &template_address;
+	ISCSI_GET_PDU_TEMPLATE_ADDRESS(phba, ptemplate_address);
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+			   OPCODE_COMMON_ISCSI_TCP_CONNECT_AND_OFFLOAD,
+			   sizeof(*req));
+	if (dst_addr->sa_family == PF_INET) {
+		__be32 s_addr = daddr_in->sin_addr.s_addr;
+		req->ip_address.ip_type = BE2_IPV4;
+		req->ip_address.ip_address[0] = s_addr & 0x000000ff;
+		req->ip_address.ip_address[1] = (s_addr & 0x0000ff00) >> 8;
+		req->ip_address.ip_address[2] = (s_addr & 0x00ff0000) >> 16;
+		req->ip_address.ip_address[3] = (s_addr & 0xff000000) >> 24;
+		req->tcp_port = ntohs(daddr_in->sin_port);
+		beiscsi_ep->dst_addr = daddr_in->sin_addr.s_addr;
+		beiscsi_ep->dst_tcpport = ntohs(daddr_in->sin_port);
+		beiscsi_ep->ip_type = BE2_IPV4;
+	} else if (dst_addr->sa_family == PF_INET6) {
+		req->ip_address.ip_type = BE2_IPV6;
+		memcpy(&req->ip_address.ip_address,
+		       &daddr_in6->sin6_addr.in6_u.u6_addr8, 16);
+		req->tcp_port = ntohs(daddr_in6->sin6_port);
+		beiscsi_ep->dst_tcpport = ntohs(daddr_in6->sin6_port);
+		memcpy(&beiscsi_ep->dst6_addr,
+		       &daddr_in6->sin6_addr.in6_u.u6_addr8, 16);
+		beiscsi_ep->ip_type = BE2_IPV6;
+	} else{
+		shost_printk(KERN_ERR, phba->shost, "unknown addr family %d\n",
+			     dst_addr->sa_family);
+		spin_unlock(&ctrl->mbox_lock);
+		return -EINVAL;
+
+	}
+	req->cid = cid;
+	req->cq_id = phwi_context->be_cq.id;
+	req->defq_id = def_hdr_id;
+	req->hdr_ring_id = def_hdr_id;
+	req->data_ring_id = def_data_id;
+	req->do_offload = 1;
+	req->dataout_template_pa.lo = ptemplate_address->lo;
+	req->dataout_template_pa.hi = ptemplate_address->hi;
+	status = be_mbox_notify(ctrl);
+	if (!status) {
+		struct iscsi_endpoint *ep;
+		struct tcp_connect_and_offload_out *ptcpcnct_out =
+							embedded_payload(wrb);
+
+		ep = phba->ep_array[ptcpcnct_out->cid];
+		beiscsi_ep = ep->dd_data;
+		beiscsi_ep->fw_handle = 0;
+		beiscsi_ep->cid_vld = 1;
+		SE_DEBUG(DBG_LVL_8, "mgmt_open_connection Success\n");
+	} else
+		SE_DEBUG(DBG_LVL_1, "mgmt_open_connection Failed\n");
+	spin_unlock(&ctrl->mbox_lock);
+	return status;
+}
diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h
new file mode 100644
index 000000000000..00e816ee8070
--- /dev/null
+++ b/drivers/scsi/be2iscsi/be_mgmt.h
@@ -0,0 +1,249 @@
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#ifndef _BEISCSI_MGMT_
+#define _BEISCSI_MGMT_
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include "be_iscsi.h"
+#include "be_main.h"
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_sge {
+	u8 pa_lo[32];		/* dword 0 */
+	u8 pa_hi[32];		/* dword 1 */
+	u8 length[32];		/* DWORD 2 */
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_wrb_payload {
+	union {
+		struct amap_mcc_sge sgl[19];
+		u8 embedded[59 * 32];	/* DWORDS 57 to 115 */
+	} u;
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_wrb {
+	u8 embedded;		/* DWORD 0 */
+	u8 rsvd0[2];		/* DWORD 0 */
+	u8 sge_count[5];	/* DWORD 0 */
+	u8 rsvd1[16];		/* DWORD 0 */
+	u8 special[8];		/* DWORD 0 */
+	u8 payload_length[32];
+	u8 tag[64];		/* DWORD 2 */
+	u8 rsvd2[32];		/* DWORD 4 */
+	struct amap_mcc_wrb_payload payload;
+};
+
+struct mcc_sge {
+	u32 pa_lo;		/* dword 0 */
+	u32 pa_hi;		/* dword 1 */
+	u32 length;		/* DWORD 2 */
+} __packed;
+
+struct mcc_wrb_payload {
+	union {
+		struct mcc_sge sgl[19];
+		u32 embedded[59];	/* DWORDS 57 to 115 */
+	} u;
+} __packed;
+
+#define MCC_WRB_EMBEDDED_MASK                0x00000001
+
+struct mcc_wrb {
+	u32 dw[0];		/* DWORD 0 */
+	u32 payload_length;
+	u32 tag[2];		/* DWORD 2 */
+	u32 rsvd2[1];		/* DWORD 4 */
+	struct mcc_wrb_payload payload;
+};
+
+unsigned char mgmt_epfw_cleanup(struct beiscsi_hba *phba, unsigned short chute);
+int mgmt_open_connection(struct beiscsi_hba *phba, struct sockaddr *dst_addr,
+			 struct beiscsi_endpoint *beiscsi_ep);
+
+unsigned char mgmt_upload_connection(struct beiscsi_hba *phba,
+				     unsigned short cid,
+				     unsigned int upload_flag);
+unsigned char mgmt_invalidate_icds(struct beiscsi_hba *phba,
+				   unsigned int icd, unsigned int cid);
+
+struct iscsi_invalidate_connection_params_in {
+	struct be_cmd_req_hdr hdr;
+	unsigned int session_handle;
+	unsigned short cid;
+	unsigned short unused;
+	unsigned short cleanup_type;
+	unsigned short save_cfg;
+} __packed;
+
+struct iscsi_invalidate_connection_params_out {
+	unsigned int session_handle;
+	unsigned short cid;
+	unsigned short unused;
+} __packed;
+
+union iscsi_invalidate_connection_params {
+	struct iscsi_invalidate_connection_params_in request;
+	struct iscsi_invalidate_connection_params_out response;
+} __packed;
+
+struct invalidate_command_table {
+	unsigned short icd;
+	unsigned short cid;
+} __packed;
+
+struct invalidate_commands_params_in {
+	struct be_cmd_req_hdr hdr;
+	unsigned int ref_handle;
+	unsigned int icd_count;
+	struct invalidate_command_table table[128];
+	unsigned short cleanup_type;
+	unsigned short unused;
+} __packed;
+
+struct invalidate_commands_params_out {
+	unsigned int ref_handle;
+	unsigned int icd_count;
+	unsigned int icd_status[128];
+} __packed;
+
+union invalidate_commands_params {
+	struct invalidate_commands_params_in request;
+	struct invalidate_commands_params_out response;
+} __packed;
+
+struct mgmt_hba_attributes {
+	u8 flashrom_version_string[32];
+	u8 manufacturer_name[32];
+	u32 supported_modes;
+	u8 seeprom_version_lo;
+	u8 seeprom_version_hi;
+	u8 rsvd0[2];
+	u32 fw_cmd_data_struct_version;
+	u32 ep_fw_data_struct_version;
+	u32 future_reserved[12];
+	u32 default_extended_timeout;
+	u8 controller_model_number[32];
+	u8 controller_description[64];
+	u8 controller_serial_number[32];
+	u8 ip_version_string[32];
+	u8 firmware_version_string[32];
+	u8 bios_version_string[32];
+	u8 redboot_version_string[32];
+	u8 driver_version_string[32];
+	u8 fw_on_flash_version_string[32];
+	u32 functionalities_supported;
+	u16 max_cdblength;
+	u8 asic_revision;
+	u8 generational_guid[16];
+	u8 hba_port_count;
+	u16 default_link_down_timeout;
+	u8 iscsi_ver_min_max;
+	u8 multifunction_device;
+	u8 cache_valid;
+	u8 hba_status;
+	u8 max_domains_supported;
+	u8 phy_port;
+	u32 firmware_post_status;
+	u32 hba_mtu[8];
+	u32 future_u32[4];
+} __packed;
+
+struct mgmt_controller_attributes {
+	struct mgmt_hba_attributes hba_attribs;
+	u16 pci_vendor_id;
+	u16 pci_device_id;
+	u16 pci_sub_vendor_id;
+	u16 pci_sub_system_id;
+	u8 pci_bus_number;
+	u8 pci_device_number;
+	u8 pci_function_number;
+	u8 interface_type;
+	u64 unique_identifier;
+	u8 netfilters;
+	u8 rsvd0[3];
+	u8 future_u32[4];
+} __packed;
+
+struct be_mgmt_controller_attributes {
+	struct be_cmd_req_hdr hdr;
+	struct mgmt_controller_attributes params;
+} __packed;
+
+struct be_mgmt_controller_attributes_resp {
+	struct be_cmd_resp_hdr hdr;
+	struct mgmt_controller_attributes params;
+} __packed;
+
+/* configuration management */
+
+#define GET_MGMT_CONTROLLER_WS(phba)    (phba->pmgmt_ws)
+
+/* MGMT CMD flags */
+
+#define MGMT_CMDH_FREE                (1<<0)
+
+/*  --- MGMT_ERROR_CODES --- */
+/*  Error Codes returned in the status field of the CMD response header */
+#define MGMT_STATUS_SUCCESS 0	/* The CMD completed without errors */
+#define MGMT_STATUS_FAILED 1	/* Error status in the Status field of */
+				/* the CMD_RESPONSE_HEADER  */
+
+#define ISCSI_GET_PDU_TEMPLATE_ADDRESS(pc, pa) {\
+    pa->lo = phba->init_mem[ISCSI_MEM_GLOBAL_HEADER].mem_array[0].\
+					bus_address.u.a32.address_lo;  \
+    pa->hi = phba->init_mem[ISCSI_MEM_GLOBAL_HEADER].mem_array[0].\
+					bus_address.u.a32.address_hi;  \
+}
+
+struct beiscsi_endpoint {
+	struct beiscsi_hba *phba;
+	struct beiscsi_sess *sess;
+	struct beiscsi_conn *conn;
+	unsigned short ip_type;
+	char dst6_addr[ISCSI_ADDRESS_BUF_LEN];
+	unsigned long dst_addr;
+	unsigned short ep_cid;
+	unsigned int fw_handle;
+	u16 dst_tcpport;
+	u16 cid_vld;
+};
+
+unsigned char mgmt_get_fw_config(struct be_ctrl_info *ctrl,
+				 struct beiscsi_hba *phba);
+
+unsigned char mgmt_invalidate_connection(struct beiscsi_hba *phba,
+					 struct beiscsi_endpoint *beiscsi_ep,
+					 unsigned short cid,
+					 unsigned short issue_reset,
+					 unsigned short savecfg_flag);
+#endif
diff --git a/drivers/scsi/bfa/Makefile b/drivers/scsi/bfa/Makefile
new file mode 100644
index 000000000000..1d6009490d1c
--- /dev/null
+++ b/drivers/scsi/bfa/Makefile
@@ -0,0 +1,15 @@
+obj-$(CONFIG_SCSI_BFA_FC) := bfa.o
+
+bfa-y := bfad.o bfad_intr.o bfad_os.o bfad_im.o bfad_attr.o bfad_fwimg.o
+
+bfa-y += bfa_core.o bfa_ioc.o bfa_iocfc.o bfa_fcxp.o bfa_lps.o
+bfa-y += bfa_hw_cb.o bfa_hw_ct.o bfa_intr.o bfa_timer.o bfa_rport.o 
+bfa-y += bfa_fcport.o bfa_port.o bfa_uf.o bfa_sgpg.o bfa_module.o bfa_ioim.o
+bfa-y += bfa_itnim.o bfa_fcpim.o bfa_tskim.o bfa_log.o bfa_log_module.o
+bfa-y += bfa_csdebug.o bfa_sm.o plog.o
+
+bfa-y += fcbuild.o fabric.o fcpim.o vfapi.o fcptm.o bfa_fcs.o bfa_fcs_port.o 
+bfa-y += bfa_fcs_uf.o bfa_fcs_lport.o fab.o fdmi.o ms.o ns.o scn.o loop.o
+bfa-y += lport_api.o n2n.o rport.o rport_api.o rport_ftrs.o vport.o
+
+ccflags-y := -I$(obj) -I$(obj)/include -I$(obj)/include/cna
diff --git a/drivers/scsi/bfa/bfa_callback_priv.h b/drivers/scsi/bfa/bfa_callback_priv.h
new file mode 100644
index 000000000000..1e3265c9f7d4
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_callback_priv.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_CALLBACK_PRIV_H__
+#define __BFA_CALLBACK_PRIV_H__
+
+#include <cs/bfa_q.h>
+
+typedef void    (*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
+
+/**
+ * Generic BFA callback element.
+ */
+struct bfa_cb_qe_s {
+	struct list_head         qe;
+	bfa_cb_cbfn_t  cbfn;
+	bfa_boolean_t   once;
+	u32		rsvd;
+	void           *cbarg;
+};
+
+#define bfa_cb_queue(__bfa, __hcb_qe, __cbfn, __cbarg) do {		\
+	(__hcb_qe)->cbfn  = (__cbfn);      \
+	(__hcb_qe)->cbarg = (__cbarg);      \
+	list_add_tail(&(__hcb_qe)->qe, &(__bfa)->comp_q);      \
+} while (0)
+
+#define bfa_cb_dequeue(__hcb_qe)	list_del(&(__hcb_qe)->qe)
+
+#define bfa_cb_queue_once(__bfa, __hcb_qe, __cbfn, __cbarg) do {	\
+	(__hcb_qe)->cbfn  = (__cbfn);      \
+	(__hcb_qe)->cbarg = (__cbarg);      \
+	if (!(__hcb_qe)->once) {      \
+		list_add_tail((__hcb_qe), &(__bfa)->comp_q);      \
+		(__hcb_qe)->once = BFA_TRUE;				\
+	}								\
+} while (0)
+
+#define bfa_cb_queue_done(__hcb_qe) do {				\
+	(__hcb_qe)->once = BFA_FALSE;					\
+} while (0)
+
+#endif /* __BFA_CALLBACK_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_cb_ioim_macros.h b/drivers/scsi/bfa/bfa_cb_ioim_macros.h
new file mode 100644
index 000000000000..0050c838c358
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_cb_ioim_macros.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_cb_ioim_macros.h BFA IOIM driver interface macros.
+ */
+
+#ifndef __BFA_HCB_IOIM_MACROS_H__
+#define __BFA_HCB_IOIM_MACROS_H__
+
+#include <bfa_os_inc.h>
+/*
+ * #include <linux/dma-mapping.h>
+ *
+ * #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include
+ * <scsi/scsi_device.h> #include <scsi/scsi_host.h>
+ */
+#include "bfad_im_compat.h"
+
+/*
+ * task attribute values in FCP-2 FCP_CMND IU
+ */
+#define SIMPLE_Q    0
+#define HEAD_OF_Q   1
+#define ORDERED_Q   2
+#define ACA_Q       4
+#define UNTAGGED    5
+
+static inline lun_t
+bfad_int_to_lun(u32 luno)
+{
+	union {
+		u16        scsi_lun[4];
+		lun_t           bfa_lun;
+	} lun;
+
+	lun.bfa_lun     = 0;
+	lun.scsi_lun[0] = bfa_os_htons(luno);
+
+	return (lun.bfa_lun);
+}
+
+/**
+ * Get LUN for the I/O request
+ */
+#define bfa_cb_ioim_get_lun(__dio)	\
+	bfad_int_to_lun(((struct scsi_cmnd *)__dio)->device->lun)
+
+/**
+ * Get CDB for the I/O request
+ */
+static inline u8 *
+bfa_cb_ioim_get_cdb(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+
+	return ((u8 *) cmnd->cmnd);
+}
+
+/**
+ * Get I/O direction (read/write) for the I/O request
+ */
+static inline enum fcp_iodir
+bfa_cb_ioim_get_iodir(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	enum dma_data_direction dmadir;
+
+	dmadir = cmnd->sc_data_direction;
+	if (dmadir == DMA_TO_DEVICE)
+		return FCP_IODIR_WRITE;
+	else if (dmadir == DMA_FROM_DEVICE)
+		return FCP_IODIR_READ;
+	else
+		return FCP_IODIR_NONE;
+}
+
+/**
+ * Get IO size in bytes for the I/O request
+ */
+static inline u32
+bfa_cb_ioim_get_size(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+
+	return (scsi_bufflen(cmnd));
+}
+
+/**
+ * Get timeout for the I/O request
+ */
+static inline u8
+bfa_cb_ioim_get_timeout(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	/*
+	 * TBD: need a timeout for scsi passthru
+	 */
+	if (cmnd->device->host == NULL)
+		return 4;
+
+	return 0;
+}
+
+/**
+ * Get SG element for the I/O request given the SG element index
+ */
+static inline union bfi_addr_u
+bfa_cb_ioim_get_sgaddr(struct bfad_ioim_s *dio, int sgeid)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	struct scatterlist *sge;
+	u64        addr;
+
+	sge = (struct scatterlist *)scsi_sglist(cmnd) + sgeid;
+	addr = (u64) sg_dma_address(sge);
+
+	return (*(union bfi_addr_u *) &addr);
+}
+
+static inline u32
+bfa_cb_ioim_get_sglen(struct bfad_ioim_s *dio, int sgeid)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	struct scatterlist *sge;
+	u32        len;
+
+	sge = (struct scatterlist *)scsi_sglist(cmnd) + sgeid;
+	len = sg_dma_len(sge);
+
+	return len;
+}
+
+/**
+ * Get Command Reference Number for the I/O request. 0 if none.
+ */
+static inline u8
+bfa_cb_ioim_get_crn(struct bfad_ioim_s *dio)
+{
+	return 0;
+}
+
+/**
+ * Get SAM-3 priority for the I/O request. 0 is default.
+ */
+static inline u8
+bfa_cb_ioim_get_priority(struct bfad_ioim_s *dio)
+{
+	return 0;
+}
+
+/**
+ * Get task attributes for the I/O request. Default is FCP_TASK_ATTR_SIMPLE(0).
+ */
+static inline u8
+bfa_cb_ioim_get_taskattr(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	u8         task_attr = UNTAGGED;
+
+	if (cmnd->device->tagged_supported) {
+		switch (cmnd->tag) {
+		case HEAD_OF_QUEUE_TAG:
+			task_attr = HEAD_OF_Q;
+			break;
+		case ORDERED_QUEUE_TAG:
+			task_attr = ORDERED_Q;
+			break;
+		default:
+			task_attr = SIMPLE_Q;
+			break;
+		}
+	}
+
+	return task_attr;
+}
+
+/**
+ * Get CDB length in bytes for the I/O request. Default is FCP_CMND_CDB_LEN(16).
+ */
+static inline u8
+bfa_cb_ioim_get_cdblen(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+
+	return (cmnd->cmd_len);
+}
+
+
+
+#endif /* __BFA_HCB_IOIM_MACROS_H__ */
diff --git a/drivers/scsi/bfa/bfa_cee.c b/drivers/scsi/bfa/bfa_cee.c
new file mode 100644
index 000000000000..7a959c34e789
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_cee.c
@@ -0,0 +1,492 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <defs/bfa_defs_cee.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+#include <cs/bfa_debug.h>
+#include <cee/bfa_cee.h>
+#include <bfi/bfi_cee.h>
+#include <bfi/bfi.h>
+#include <bfa_ioc.h>
+#include <cna/bfa_cna_trcmod.h>
+
+BFA_TRC_FILE(CNA, CEE);
+
+#define bfa_ioc_portid(__ioc) ((__ioc)->port_id)
+#define bfa_lpuid(__arg) bfa_ioc_portid(&(__arg)->ioc)
+
+static void     bfa_cee_format_lldp_cfg(struct bfa_cee_lldp_cfg_s *lldp_cfg);
+static void     bfa_cee_format_dcbcx_stats(struct bfa_cee_dcbx_stats_s
+					   *dcbcx_stats);
+static void     bfa_cee_format_lldp_stats(struct bfa_cee_lldp_stats_s
+					  *lldp_stats);
+static void     bfa_cee_format_cfg_stats(struct bfa_cee_cfg_stats_s *cfg_stats);
+static void     bfa_cee_format_cee_cfg(void *buffer);
+static void     bfa_cee_format_cee_stats(void *buffer);
+
+static void
+bfa_cee_format_cee_stats(void *buffer)
+{
+	struct bfa_cee_stats_s *cee_stats = buffer;
+	bfa_cee_format_dcbcx_stats(&cee_stats->dcbx_stats);
+	bfa_cee_format_lldp_stats(&cee_stats->lldp_stats);
+	bfa_cee_format_cfg_stats(&cee_stats->cfg_stats);
+}
+
+static void
+bfa_cee_format_cee_cfg(void *buffer)
+{
+	struct bfa_cee_attr_s *cee_cfg = buffer;
+	bfa_cee_format_lldp_cfg(&cee_cfg->lldp_remote);
+}
+
+static void
+bfa_cee_format_dcbcx_stats(struct bfa_cee_dcbx_stats_s *dcbcx_stats)
+{
+	dcbcx_stats->subtlvs_unrecognized =
+		bfa_os_ntohl(dcbcx_stats->subtlvs_unrecognized);
+	dcbcx_stats->negotiation_failed =
+		bfa_os_ntohl(dcbcx_stats->negotiation_failed);
+	dcbcx_stats->remote_cfg_changed =
+		bfa_os_ntohl(dcbcx_stats->remote_cfg_changed);
+	dcbcx_stats->tlvs_received = bfa_os_ntohl(dcbcx_stats->tlvs_received);
+	dcbcx_stats->tlvs_invalid = bfa_os_ntohl(dcbcx_stats->tlvs_invalid);
+	dcbcx_stats->seqno = bfa_os_ntohl(dcbcx_stats->seqno);
+	dcbcx_stats->ackno = bfa_os_ntohl(dcbcx_stats->ackno);
+	dcbcx_stats->recvd_seqno = bfa_os_ntohl(dcbcx_stats->recvd_seqno);
+	dcbcx_stats->recvd_ackno = bfa_os_ntohl(dcbcx_stats->recvd_ackno);
+}
+
+static void
+bfa_cee_format_lldp_stats(struct bfa_cee_lldp_stats_s *lldp_stats)
+{
+	lldp_stats->frames_transmitted =
+		bfa_os_ntohl(lldp_stats->frames_transmitted);
+	lldp_stats->frames_aged_out = bfa_os_ntohl(lldp_stats->frames_aged_out);
+	lldp_stats->frames_discarded =
+		bfa_os_ntohl(lldp_stats->frames_discarded);
+	lldp_stats->frames_in_error = bfa_os_ntohl(lldp_stats->frames_in_error);
+	lldp_stats->frames_rcvd = bfa_os_ntohl(lldp_stats->frames_rcvd);
+	lldp_stats->tlvs_discarded = bfa_os_ntohl(lldp_stats->tlvs_discarded);
+	lldp_stats->tlvs_unrecognized =
+		bfa_os_ntohl(lldp_stats->tlvs_unrecognized);
+}
+
+static void
+bfa_cee_format_cfg_stats(struct bfa_cee_cfg_stats_s *cfg_stats)
+{
+	cfg_stats->cee_status_down = bfa_os_ntohl(cfg_stats->cee_status_down);
+	cfg_stats->cee_status_up = bfa_os_ntohl(cfg_stats->cee_status_up);
+	cfg_stats->cee_hw_cfg_changed =
+		bfa_os_ntohl(cfg_stats->cee_hw_cfg_changed);
+	cfg_stats->recvd_invalid_cfg =
+		bfa_os_ntohl(cfg_stats->recvd_invalid_cfg);
+}
+
+static void
+bfa_cee_format_lldp_cfg(struct bfa_cee_lldp_cfg_s *lldp_cfg)
+{
+	lldp_cfg->time_to_interval = bfa_os_ntohs(lldp_cfg->time_to_interval);
+	lldp_cfg->enabled_system_cap =
+		bfa_os_ntohs(lldp_cfg->enabled_system_cap);
+}
+
+/**
+ * bfa_cee_attr_meminfo()
+ *
+ *
+ * @param[in] void
+ *
+ * @return Size of DMA region
+ */
+static          u32
+bfa_cee_attr_meminfo(void)
+{
+	return BFA_ROUNDUP(sizeof(struct bfa_cee_attr_s), BFA_DMA_ALIGN_SZ);
+}
+
+/**
+ * bfa_cee_stats_meminfo()
+ *
+ *
+ * @param[in] void
+ *
+ * @return Size of DMA region
+ */
+static          u32
+bfa_cee_stats_meminfo(void)
+{
+	return BFA_ROUNDUP(sizeof(struct bfa_cee_stats_s), BFA_DMA_ALIGN_SZ);
+}
+
+/**
+ * bfa_cee_get_attr_isr()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module
+ *            status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_cee_get_attr_isr(struct bfa_cee_s *cee, bfa_status_t status)
+{
+	cee->get_attr_status = status;
+	bfa_trc(cee, 0);
+	if (status == BFA_STATUS_OK) {
+		bfa_trc(cee, 0);
+		/*
+		 * The requested data has been copied to the DMA area, *process
+		 * it.
+		 */
+		memcpy(cee->attr, cee->attr_dma.kva,
+		       sizeof(struct bfa_cee_attr_s));
+		bfa_cee_format_cee_cfg(cee->attr);
+	}
+	cee->get_attr_pending = BFA_FALSE;
+	if (cee->cbfn.get_attr_cbfn) {
+		bfa_trc(cee, 0);
+		cee->cbfn.get_attr_cbfn(cee->cbfn.get_attr_cbarg, status);
+	}
+	bfa_trc(cee, 0);
+}
+
+/**
+ * bfa_cee_get_attr_isr()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module
+ *            status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_cee_get_stats_isr(struct bfa_cee_s *cee, bfa_status_t status)
+{
+	cee->get_stats_status = status;
+	bfa_trc(cee, 0);
+	if (status == BFA_STATUS_OK) {
+		bfa_trc(cee, 0);
+		/*
+		 * The requested data has been copied to the DMA area, process
+		 * it.
+		 */
+		memcpy(cee->stats, cee->stats_dma.kva,
+		       sizeof(struct bfa_cee_stats_s));
+		bfa_cee_format_cee_stats(cee->stats);
+	}
+	cee->get_stats_pending = BFA_FALSE;
+	bfa_trc(cee, 0);
+	if (cee->cbfn.get_stats_cbfn) {
+		bfa_trc(cee, 0);
+		cee->cbfn.get_stats_cbfn(cee->cbfn.get_stats_cbarg, status);
+	}
+	bfa_trc(cee, 0);
+}
+
+/**
+ * bfa_cee_get_attr_isr()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module
+ *            status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_cee_reset_stats_isr(struct bfa_cee_s *cee, bfa_status_t status)
+{
+	cee->reset_stats_status = status;
+	cee->reset_stats_pending = BFA_FALSE;
+	if (cee->cbfn.reset_stats_cbfn)
+		cee->cbfn.reset_stats_cbfn(cee->cbfn.reset_stats_cbarg, status);
+}
+
+/**
+ * bfa_cee_meminfo()
+ *
+ *
+ * @param[in] void
+ *
+ * @return Size of DMA region
+ */
+u32
+bfa_cee_meminfo(void)
+{
+	return (bfa_cee_attr_meminfo() + bfa_cee_stats_meminfo());
+}
+
+/**
+ * bfa_cee_mem_claim()
+ *
+ *
+ * @param[in] cee CEE module pointer
+ * 	      dma_kva Kernel Virtual Address of CEE DMA Memory
+ * 	      dma_pa  Physical Address of CEE DMA Memory
+ *
+ * @return void
+ */
+void
+bfa_cee_mem_claim(struct bfa_cee_s *cee, u8 *dma_kva, u64 dma_pa)
+{
+	cee->attr_dma.kva = dma_kva;
+	cee->attr_dma.pa = dma_pa;
+	cee->stats_dma.kva = dma_kva + bfa_cee_attr_meminfo();
+	cee->stats_dma.pa = dma_pa + bfa_cee_attr_meminfo();
+	cee->attr = (struct bfa_cee_attr_s *)dma_kva;
+	cee->stats =
+		(struct bfa_cee_stats_s *)(dma_kva + bfa_cee_attr_meminfo());
+}
+
+/**
+ * bfa_cee_get_attr()
+ *
+ *   Send the request to the f/w to fetch CEE attributes.
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return Status
+ */
+
+bfa_status_t
+bfa_cee_get_attr(struct bfa_cee_s *cee, struct bfa_cee_attr_s *attr,
+		 bfa_cee_get_attr_cbfn_t cbfn, void *cbarg)
+{
+	struct bfi_cee_get_req_s *cmd;
+
+	bfa_assert((cee != NULL) && (cee->ioc != NULL));
+	bfa_trc(cee, 0);
+	if (!bfa_ioc_is_operational(cee->ioc)) {
+		bfa_trc(cee, 0);
+		return BFA_STATUS_IOC_FAILURE;
+	}
+	if (cee->get_attr_pending == BFA_TRUE) {
+		bfa_trc(cee, 0);
+		return BFA_STATUS_DEVBUSY;
+	}
+	cee->get_attr_pending = BFA_TRUE;
+	cmd = (struct bfi_cee_get_req_s *)cee->get_cfg_mb.msg;
+	cee->attr = attr;
+	cee->cbfn.get_attr_cbfn = cbfn;
+	cee->cbfn.get_attr_cbarg = cbarg;
+	bfi_h2i_set(cmd->mh, BFI_MC_CEE, BFI_CEE_H2I_GET_CFG_REQ,
+		    bfa_ioc_portid(cee->ioc));
+	bfa_dma_be_addr_set(cmd->dma_addr, cee->attr_dma.pa);
+	bfa_ioc_mbox_queue(cee->ioc, &cee->get_cfg_mb);
+	bfa_trc(cee, 0);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_cee_get_stats()
+ *
+ *   Send the request to the f/w to fetch CEE statistics.
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return Status
+ */
+
+bfa_status_t
+bfa_cee_get_stats(struct bfa_cee_s *cee, struct bfa_cee_stats_s *stats,
+		  bfa_cee_get_stats_cbfn_t cbfn, void *cbarg)
+{
+	struct bfi_cee_get_req_s *cmd;
+
+	bfa_assert((cee != NULL) && (cee->ioc != NULL));
+
+	if (!bfa_ioc_is_operational(cee->ioc)) {
+		bfa_trc(cee, 0);
+		return BFA_STATUS_IOC_FAILURE;
+	}
+	if (cee->get_stats_pending == BFA_TRUE) {
+		bfa_trc(cee, 0);
+		return BFA_STATUS_DEVBUSY;
+	}
+	cee->get_stats_pending = BFA_TRUE;
+	cmd = (struct bfi_cee_get_req_s *)cee->get_stats_mb.msg;
+	cee->stats = stats;
+	cee->cbfn.get_stats_cbfn = cbfn;
+	cee->cbfn.get_stats_cbarg = cbarg;
+	bfi_h2i_set(cmd->mh, BFI_MC_CEE, BFI_CEE_H2I_GET_STATS_REQ,
+		    bfa_ioc_portid(cee->ioc));
+	bfa_dma_be_addr_set(cmd->dma_addr, cee->stats_dma.pa);
+	bfa_ioc_mbox_queue(cee->ioc, &cee->get_stats_mb);
+	bfa_trc(cee, 0);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_cee_reset_stats()
+ *
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return Status
+ */
+
+bfa_status_t
+bfa_cee_reset_stats(struct bfa_cee_s *cee, bfa_cee_reset_stats_cbfn_t cbfn,
+		    void *cbarg)
+{
+	struct bfi_cee_reset_stats_s *cmd;
+
+	bfa_assert((cee != NULL) && (cee->ioc != NULL));
+	if (!bfa_ioc_is_operational(cee->ioc)) {
+		bfa_trc(cee, 0);
+		return BFA_STATUS_IOC_FAILURE;
+	}
+	if (cee->reset_stats_pending == BFA_TRUE) {
+		bfa_trc(cee, 0);
+		return BFA_STATUS_DEVBUSY;
+	}
+	cee->reset_stats_pending = BFA_TRUE;
+	cmd = (struct bfi_cee_reset_stats_s *)cee->reset_stats_mb.msg;
+	cee->cbfn.reset_stats_cbfn = cbfn;
+	cee->cbfn.reset_stats_cbarg = cbarg;
+	bfi_h2i_set(cmd->mh, BFI_MC_CEE, BFI_CEE_H2I_RESET_STATS,
+		    bfa_ioc_portid(cee->ioc));
+	bfa_ioc_mbox_queue(cee->ioc, &cee->reset_stats_mb);
+	bfa_trc(cee, 0);
+	return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_cee_isrs()
+ *
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return void
+ */
+
+void
+bfa_cee_isr(void *cbarg, struct bfi_mbmsg_s *m)
+{
+	union bfi_cee_i2h_msg_u *msg;
+	struct bfi_cee_get_rsp_s *get_rsp;
+	struct bfa_cee_s *cee = (struct bfa_cee_s *)cbarg;
+	msg = (union bfi_cee_i2h_msg_u *)m;
+	get_rsp = (struct bfi_cee_get_rsp_s *)m;
+	bfa_trc(cee, msg->mh.msg_id);
+	switch (msg->mh.msg_id) {
+	case BFI_CEE_I2H_GET_CFG_RSP:
+		bfa_trc(cee, get_rsp->cmd_status);
+		bfa_cee_get_attr_isr(cee, get_rsp->cmd_status);
+		break;
+	case BFI_CEE_I2H_GET_STATS_RSP:
+		bfa_cee_get_stats_isr(cee, get_rsp->cmd_status);
+		break;
+	case BFI_CEE_I2H_RESET_STATS_RSP:
+		bfa_cee_reset_stats_isr(cee, get_rsp->cmd_status);
+		break;
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * bfa_cee_hbfail()
+ *
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return void
+ */
+
+void
+bfa_cee_hbfail(void *arg)
+{
+	struct bfa_cee_s *cee;
+	cee = (struct bfa_cee_s *)arg;
+
+	if (cee->get_attr_pending == BFA_TRUE) {
+		cee->get_attr_status = BFA_STATUS_FAILED;
+		cee->get_attr_pending = BFA_FALSE;
+		if (cee->cbfn.get_attr_cbfn) {
+			cee->cbfn.get_attr_cbfn(cee->cbfn.get_attr_cbarg,
+						BFA_STATUS_FAILED);
+		}
+	}
+	if (cee->get_stats_pending == BFA_TRUE) {
+		cee->get_stats_status = BFA_STATUS_FAILED;
+		cee->get_stats_pending = BFA_FALSE;
+		if (cee->cbfn.get_stats_cbfn) {
+			cee->cbfn.get_stats_cbfn(cee->cbfn.get_stats_cbarg,
+						 BFA_STATUS_FAILED);
+		}
+	}
+	if (cee->reset_stats_pending == BFA_TRUE) {
+		cee->reset_stats_status = BFA_STATUS_FAILED;
+		cee->reset_stats_pending = BFA_FALSE;
+		if (cee->cbfn.reset_stats_cbfn) {
+			cee->cbfn.reset_stats_cbfn(cee->cbfn.reset_stats_cbarg,
+						   BFA_STATUS_FAILED);
+		}
+	}
+}
+
+/**
+ * bfa_cee_attach()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module data structure
+ *            ioc - Pointer to the ioc module data structure
+ *            dev - Pointer to the device driver module data structure
+ *                  The device driver specific mbox ISR functions have
+ *                  this pointer as one of the parameters.
+ *            trcmod -
+ *            logmod -
+ *
+ * @return void
+ */
+void
+bfa_cee_attach(struct bfa_cee_s *cee, struct bfa_ioc_s *ioc, void *dev,
+	       struct bfa_trc_mod_s *trcmod, struct bfa_log_mod_s *logmod)
+{
+	bfa_assert(cee != NULL);
+	cee->dev = dev;
+	cee->trcmod = trcmod;
+	cee->logmod = logmod;
+	cee->ioc = ioc;
+
+	bfa_ioc_mbox_regisr(cee->ioc, BFI_MC_CEE, bfa_cee_isr, cee);
+	bfa_ioc_hbfail_init(&cee->hbfail, bfa_cee_hbfail, cee);
+	bfa_ioc_hbfail_register(cee->ioc, &cee->hbfail);
+	bfa_trc(cee, 0);
+}
+
+/**
+ * bfa_cee_detach()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module data structure
+ *
+ * @return void
+ */
+void
+bfa_cee_detach(struct bfa_cee_s *cee)
+{
+	/*
+	 * For now, just check if there is some ioctl pending and mark that as
+	 * failed?
+	 */
+	/* bfa_cee_hbfail(cee); */
+}
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
new file mode 100644
index 000000000000..44e2d1155c51
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -0,0 +1,402 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <defs/bfa_defs_pci.h>
+#include <cs/bfa_debug.h>
+#include <bfa_iocfc.h>
+
+#define DEF_CFG_NUM_FABRICS         1
+#define DEF_CFG_NUM_LPORTS          256
+#define DEF_CFG_NUM_CQS             4
+#define DEF_CFG_NUM_IOIM_REQS       (BFA_IOIM_MAX)
+#define DEF_CFG_NUM_TSKIM_REQS      128
+#define DEF_CFG_NUM_FCXP_REQS       64
+#define DEF_CFG_NUM_UF_BUFS         64
+#define DEF_CFG_NUM_RPORTS          1024
+#define DEF_CFG_NUM_ITNIMS          (DEF_CFG_NUM_RPORTS)
+#define DEF_CFG_NUM_TINS            256
+
+#define DEF_CFG_NUM_SGPGS           2048
+#define DEF_CFG_NUM_REQQ_ELEMS      256
+#define DEF_CFG_NUM_RSPQ_ELEMS      64
+#define DEF_CFG_NUM_SBOOT_TGTS      16
+#define DEF_CFG_NUM_SBOOT_LUNS      16
+
+/**
+ * Use this function query the memory requirement of the BFA library.
+ * This function needs to be called before bfa_attach() to get the
+ * memory required of the BFA layer for a given driver configuration.
+ *
+ * This call will fail, if the cap is out of range compared to pre-defined
+ * values within the BFA library
+ *
+ * @param[in] cfg - 	pointer to bfa_ioc_cfg_t. Driver layer should indicate
+ * 			its configuration in this structure.
+ *			The default values for struct bfa_iocfc_cfg_s can be
+ *			fetched using bfa_cfg_get_default() API.
+ *
+ * 			If cap's boundary check fails, the library will use
+ *			the default bfa_cap_t values (and log a warning msg).
+ *
+ * @param[out] meminfo - pointer to bfa_meminfo_t. This content
+ * 			indicates the memory type (see bfa_mem_type_t) and
+ *			amount of memory required.
+ *
+ *			Driver should allocate the memory, populate the
+ *			starting address for each block and provide the same
+ *			structure as input parameter to bfa_attach() call.
+ *
+ * @return void
+ *
+ * Special Considerations: @note
+ */
+void
+bfa_cfg_get_meminfo(struct bfa_iocfc_cfg_s *cfg, struct bfa_meminfo_s *meminfo)
+{
+	int             i;
+	u32        km_len = 0, dm_len = 0;
+
+	bfa_assert((cfg != NULL) && (meminfo != NULL));
+
+	bfa_os_memset((void *)meminfo, 0, sizeof(struct bfa_meminfo_s));
+	meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_type =
+		BFA_MEM_TYPE_KVA;
+	meminfo->meminfo[BFA_MEM_TYPE_DMA - 1].mem_type =
+		BFA_MEM_TYPE_DMA;
+
+	bfa_iocfc_meminfo(cfg, &km_len, &dm_len);
+
+	for (i = 0; hal_mods[i]; i++)
+		hal_mods[i]->meminfo(cfg, &km_len, &dm_len);
+
+
+	meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_len = km_len;
+	meminfo->meminfo[BFA_MEM_TYPE_DMA - 1].mem_len = dm_len;
+}
+
+/**
+ * Use this function to do attach the driver instance with the BFA
+ * library. This function will not trigger any HW initialization
+ * process (which will be done in bfa_init() call)
+ *
+ * This call will fail, if the cap is out of range compared to
+ * pre-defined values within the BFA library
+ *
+ * @param[out]	bfa	Pointer to bfa_t.
+ * @param[in]	bfad 	Opaque handle back to the driver's IOC structure
+ * @param[in]	cfg	Pointer to bfa_ioc_cfg_t. Should be same structure
+ * 			that was used in bfa_cfg_get_meminfo().
+ * @param[in] 	meminfo Pointer to bfa_meminfo_t. The driver should
+ * 			use the bfa_cfg_get_meminfo() call to
+ * 			find the memory blocks required, allocate the
+ * 			required memory and provide the starting addresses.
+ * @param[in] 	pcidev	pointer to struct bfa_pcidev_s
+ *
+ * @return
+ * void
+ *
+ * Special Considerations:
+ *
+ * @note
+ *
+ */
+void
+bfa_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+	       struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+	int             i;
+	struct bfa_mem_elem_s *melem;
+
+	bfa->fcs = BFA_FALSE;
+
+	bfa_assert((cfg != NULL) && (meminfo != NULL));
+
+	/**
+	 * initialize all memory pointers for iterative allocation
+	 */
+	for (i = 0; i < BFA_MEM_TYPE_MAX; i++) {
+		melem = meminfo->meminfo + i;
+		melem->kva_curp = melem->kva;
+		melem->dma_curp = melem->dma;
+	}
+
+	bfa_iocfc_attach(bfa, bfad, cfg, meminfo, pcidev);
+
+	for (i = 0; hal_mods[i]; i++)
+		hal_mods[i]->attach(bfa, bfad, cfg, meminfo, pcidev);
+
+}
+
+/**
+ * Use this function to delete a BFA IOC. IOC should be stopped (by
+ * calling bfa_stop()) before this function call.
+ *
+ * @param[in] bfa - pointer to bfa_t.
+ *
+ * @return
+ * void
+ *
+ * Special Considerations:
+ *
+ * @note
+ */
+void
+bfa_detach(struct bfa_s *bfa)
+{
+	int	i;
+
+	for (i = 0; hal_mods[i]; i++)
+		hal_mods[i]->detach(bfa);
+
+	bfa_iocfc_detach(bfa);
+}
+
+
+void
+bfa_init_trc(struct bfa_s *bfa, struct bfa_trc_mod_s *trcmod)
+{
+	bfa->trcmod = trcmod;
+}
+
+
+void
+bfa_init_log(struct bfa_s *bfa, struct bfa_log_mod_s *logmod)
+{
+	bfa->logm = logmod;
+}
+
+
+void
+bfa_init_aen(struct bfa_s *bfa, struct bfa_aen_s *aen)
+{
+	bfa->aen = aen;
+}
+
+void
+bfa_init_plog(struct bfa_s *bfa, struct bfa_plog_s *plog)
+{
+	bfa->plog = plog;
+}
+
+/**
+ * Initialize IOC.
+ *
+ * This function will return immediately, when the IOC initialization is
+ * completed, the bfa_cb_init() will be called.
+ *
+ * @param[in]	bfa	instance
+ *
+ * @return void
+ *
+ * Special Considerations:
+ *
+ * @note
+ * When this function returns, the driver should register the interrupt service
+ * routine(s) and enable the device interrupts. If this is not done,
+ * bfa_cb_init() will never get called
+ */
+void
+bfa_init(struct bfa_s *bfa)
+{
+	bfa_iocfc_init(bfa);
+}
+
+/**
+ * Use this function initiate the IOC configuration setup. This function
+ * will return immediately.
+ *
+ * @param[in]	bfa	instance
+ *
+ * @return None
+ */
+void
+bfa_start(struct bfa_s *bfa)
+{
+	bfa_iocfc_start(bfa);
+}
+
+/**
+ * Use this function quiese the IOC. This function will return immediately,
+ * when the IOC is actually stopped, the bfa_cb_stop() will be called.
+ *
+ * @param[in] 	bfa - pointer to bfa_t.
+ *
+ * @return None
+ *
+ * Special Considerations:
+ * bfa_cb_stop() could be called before or after bfa_stop() returns.
+ *
+ * @note
+ * In case of any failure, we could handle it automatically by doing a
+ * reset and then succeed the bfa_stop() call.
+ */
+void
+bfa_stop(struct bfa_s *bfa)
+{
+	bfa_iocfc_stop(bfa);
+}
+
+void
+bfa_comp_deq(struct bfa_s *bfa, struct list_head *comp_q)
+{
+	INIT_LIST_HEAD(comp_q);
+	list_splice_tail_init(&bfa->comp_q, comp_q);
+}
+
+void
+bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q)
+{
+	struct list_head        *qe;
+	struct list_head        *qen;
+	struct bfa_cb_qe_s   *hcb_qe;
+
+	list_for_each_safe(qe, qen, comp_q) {
+		hcb_qe = (struct bfa_cb_qe_s *) qe;
+		hcb_qe->cbfn(hcb_qe->cbarg, BFA_TRUE);
+	}
+}
+
+void
+bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q)
+{
+	struct list_head        *qe;
+	struct bfa_cb_qe_s   *hcb_qe;
+
+	while (!list_empty(comp_q)) {
+		bfa_q_deq(comp_q, &qe);
+		hcb_qe = (struct bfa_cb_qe_s *) qe;
+		hcb_qe->cbfn(hcb_qe->cbarg, BFA_FALSE);
+	}
+}
+
+void
+bfa_attach_fcs(struct bfa_s *bfa)
+{
+	bfa->fcs = BFA_TRUE;
+}
+
+/**
+ * Periodic timer heart beat from driver
+ */
+void
+bfa_timer_tick(struct bfa_s *bfa)
+{
+	bfa_timer_beat(&bfa->timer_mod);
+}
+
+#ifndef BFA_BIOS_BUILD
+/**
+ * Return the list of PCI vendor/device id lists supported by this
+ * BFA instance.
+ */
+void
+bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids)
+{
+	static struct bfa_pciid_s __pciids[] = {
+		{BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_FC_8G2P},
+		{BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_FC_8G1P},
+		{BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_CT},
+	};
+
+	*npciids = sizeof(__pciids) / sizeof(__pciids[0]);
+	*pciids = __pciids;
+}
+
+/**
+ * Use this function query the default struct bfa_iocfc_cfg_s value (compiled
+ * into BFA layer). The OS driver can then turn back and overwrite entries that
+ * have been configured by the user.
+ *
+ * @param[in] cfg - pointer to bfa_ioc_cfg_t
+ *
+ * @return
+ *	void
+ *
+ * Special Considerations:
+ * 	note
+ */
+void
+bfa_cfg_get_default(struct bfa_iocfc_cfg_s *cfg)
+{
+	cfg->fwcfg.num_fabrics = DEF_CFG_NUM_FABRICS;
+	cfg->fwcfg.num_lports = DEF_CFG_NUM_LPORTS;
+	cfg->fwcfg.num_rports = DEF_CFG_NUM_RPORTS;
+	cfg->fwcfg.num_ioim_reqs = DEF_CFG_NUM_IOIM_REQS;
+	cfg->fwcfg.num_tskim_reqs = DEF_CFG_NUM_TSKIM_REQS;
+	cfg->fwcfg.num_fcxp_reqs = DEF_CFG_NUM_FCXP_REQS;
+	cfg->fwcfg.num_uf_bufs = DEF_CFG_NUM_UF_BUFS;
+	cfg->fwcfg.num_cqs = DEF_CFG_NUM_CQS;
+
+	cfg->drvcfg.num_reqq_elems = DEF_CFG_NUM_REQQ_ELEMS;
+	cfg->drvcfg.num_rspq_elems = DEF_CFG_NUM_RSPQ_ELEMS;
+	cfg->drvcfg.num_sgpgs = DEF_CFG_NUM_SGPGS;
+	cfg->drvcfg.num_sboot_tgts = DEF_CFG_NUM_SBOOT_TGTS;
+	cfg->drvcfg.num_sboot_luns = DEF_CFG_NUM_SBOOT_LUNS;
+	cfg->drvcfg.path_tov = BFA_FCPIM_PATHTOV_DEF;
+	cfg->drvcfg.ioc_recover = BFA_FALSE;
+	cfg->drvcfg.delay_comp = BFA_FALSE;
+
+}
+
+void
+bfa_cfg_get_min(struct bfa_iocfc_cfg_s *cfg)
+{
+	bfa_cfg_get_default(cfg);
+	cfg->fwcfg.num_ioim_reqs   = BFA_IOIM_MIN;
+	cfg->fwcfg.num_tskim_reqs  = BFA_TSKIM_MIN;
+	cfg->fwcfg.num_fcxp_reqs   = BFA_FCXP_MIN;
+	cfg->fwcfg.num_uf_bufs     = BFA_UF_MIN;
+	cfg->fwcfg.num_rports      = BFA_RPORT_MIN;
+
+	cfg->drvcfg.num_sgpgs      = BFA_SGPG_MIN;
+	cfg->drvcfg.num_reqq_elems = BFA_REQQ_NELEMS_MIN;
+	cfg->drvcfg.num_rspq_elems = BFA_RSPQ_NELEMS_MIN;
+	cfg->drvcfg.min_cfg        = BFA_TRUE;
+}
+
+void
+bfa_get_attr(struct bfa_s *bfa, struct bfa_ioc_attr_s *ioc_attr)
+{
+	bfa_ioc_get_attr(&bfa->ioc, ioc_attr);
+}
+
+/**
+ * Retrieve firmware trace information on IOC failure.
+ */
+bfa_status_t
+bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen)
+{
+	return bfa_ioc_debug_fwsave(&bfa->ioc, trcdata, trclen);
+}
+
+/**
+ * 		Fetch firmware trace data.
+ *
+ * @param[in]		bfa			BFA instance
+ * @param[out]		trcdata		Firmware trace buffer
+ * @param[in,out]	trclen		Firmware trace buffer len
+ *
+ * @retval BFA_STATUS_OK			Firmware trace is fetched.
+ * @retval BFA_STATUS_INPROGRESS	Firmware trace fetch is in progress.
+ */
+bfa_status_t
+bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen)
+{
+	return bfa_ioc_debug_fwtrc(&bfa->ioc, trcdata, trclen);
+}
+#endif
diff --git a/drivers/scsi/bfa/bfa_csdebug.c b/drivers/scsi/bfa/bfa_csdebug.c
new file mode 100644
index 000000000000..1b71d349451a
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_csdebug.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <cs/bfa_debug.h>
+#include <bfa_os_inc.h>
+#include <cs/bfa_q.h>
+#include <log/bfa_log_hal.h>
+
+/**
+ *  cs_debug_api
+ */
+
+
+void
+bfa_panic(int line, char *file, char *panicstr)
+{
+	bfa_log(NULL, BFA_LOG_HAL_ASSERT, file, line, panicstr);
+	bfa_os_panic();
+}
+
+void
+bfa_sm_panic(struct bfa_log_mod_s *logm, int line, char *file, int event)
+{
+	bfa_log(logm, BFA_LOG_HAL_SM_ASSERT, file, line, event);
+	bfa_os_panic();
+}
+
+int
+bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe)
+{
+	struct list_head        *tqe;
+
+	tqe = bfa_q_next(q);
+	while (tqe != q) {
+		if (tqe == qe)
+			return (1);
+		tqe = bfa_q_next(tqe);
+		if (tqe == NULL)
+			break;
+	}
+	return (0);
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
new file mode 100644
index 000000000000..401babe3494e
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -0,0 +1,175 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <log/bfa_log_hal.h>
+
+BFA_TRC_FILE(HAL, FCPIM);
+BFA_MODULE(fcpim);
+
+/**
+ *  hal_fcpim_mod BFA FCP Initiator Mode module
+ */
+
+/**
+ * 		Compute and return memory needed by FCP(im) module.
+ */
+static void
+bfa_fcpim_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+		u32 *dm_len)
+{
+	bfa_itnim_meminfo(cfg, km_len, dm_len);
+
+	/**
+	 * IO memory
+	 */
+	if (cfg->fwcfg.num_ioim_reqs < BFA_IOIM_MIN)
+		cfg->fwcfg.num_ioim_reqs = BFA_IOIM_MIN;
+	else if (cfg->fwcfg.num_ioim_reqs > BFA_IOIM_MAX)
+		cfg->fwcfg.num_ioim_reqs = BFA_IOIM_MAX;
+
+	*km_len += cfg->fwcfg.num_ioim_reqs *
+	  (sizeof(struct bfa_ioim_s) + sizeof(struct bfa_ioim_sp_s));
+
+	*dm_len += cfg->fwcfg.num_ioim_reqs * BFI_IOIM_SNSLEN;
+
+	/**
+	 * task management command memory
+	 */
+	if (cfg->fwcfg.num_tskim_reqs < BFA_TSKIM_MIN)
+		cfg->fwcfg.num_tskim_reqs = BFA_TSKIM_MIN;
+	*km_len += cfg->fwcfg.num_tskim_reqs * sizeof(struct bfa_tskim_s);
+}
+
+
+static void
+bfa_fcpim_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+		     struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+	bfa_trc(bfa, cfg->drvcfg.path_tov);
+	bfa_trc(bfa, cfg->fwcfg.num_rports);
+	bfa_trc(bfa, cfg->fwcfg.num_ioim_reqs);
+	bfa_trc(bfa, cfg->fwcfg.num_tskim_reqs);
+
+	fcpim->bfa            = bfa;
+	fcpim->num_itnims     = cfg->fwcfg.num_rports;
+	fcpim->num_ioim_reqs  = cfg->fwcfg.num_ioim_reqs;
+	fcpim->num_tskim_reqs = cfg->fwcfg.num_tskim_reqs;
+	fcpim->path_tov       = cfg->drvcfg.path_tov;
+	fcpim->delay_comp	  = cfg->drvcfg.delay_comp;
+
+	bfa_itnim_attach(fcpim, meminfo);
+	bfa_tskim_attach(fcpim, meminfo);
+	bfa_ioim_attach(fcpim, meminfo);
+}
+
+static void
+bfa_fcpim_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcpim_detach(struct bfa_s *bfa)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+	bfa_ioim_detach(fcpim);
+	bfa_tskim_detach(fcpim);
+}
+
+static void
+bfa_fcpim_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcpim_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcpim_iocdisable(struct bfa_s *bfa)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+	struct bfa_itnim_s *itnim;
+	struct list_head        *qe, *qen;
+
+	list_for_each_safe(qe, qen, &fcpim->itnim_q) {
+		itnim = (struct bfa_itnim_s *) qe;
+		bfa_itnim_iocdisable(itnim);
+	}
+}
+
+void
+bfa_fcpim_path_tov_set(struct bfa_s *bfa, u16 path_tov)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+	fcpim->path_tov = path_tov * 1000;
+	if (fcpim->path_tov > BFA_FCPIM_PATHTOV_MAX)
+		fcpim->path_tov = BFA_FCPIM_PATHTOV_MAX;
+}
+
+u16
+bfa_fcpim_path_tov_get(struct bfa_s *bfa)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+	return (fcpim->path_tov / 1000);
+}
+
+bfa_status_t
+bfa_fcpim_get_modstats(struct bfa_s *bfa, struct bfa_fcpim_stats_s *modstats)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+	*modstats = fcpim->stats;
+
+	return BFA_STATUS_OK;
+}
+
+bfa_status_t
+bfa_fcpim_clr_modstats(struct bfa_s *bfa)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+	memset(&fcpim->stats, 0, sizeof(struct bfa_fcpim_stats_s));
+
+	return BFA_STATUS_OK;
+}
+
+void
+bfa_fcpim_qdepth_set(struct bfa_s *bfa, u16 q_depth)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+	bfa_assert(q_depth <= BFA_IOCFC_QDEPTH_MAX);
+
+	fcpim->q_depth = q_depth;
+}
+
+u16
+bfa_fcpim_qdepth_get(struct bfa_s *bfa)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+	return (fcpim->q_depth);
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_fcpim_priv.h b/drivers/scsi/bfa/bfa_fcpim_priv.h
new file mode 100644
index 000000000000..153206cfb37a
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fcpim_priv.h
@@ -0,0 +1,188 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCPIM_PRIV_H__
+#define __BFA_FCPIM_PRIV_H__
+
+#include <bfa_fcpim.h>
+#include <defs/bfa_defs_fcpim.h>
+#include <cs/bfa_wc.h>
+#include "bfa_sgpg_priv.h"
+
+#define BFA_ITNIM_MIN   32
+#define BFA_ITNIM_MAX   1024
+
+#define BFA_IOIM_MIN    8
+#define BFA_IOIM_MAX    2000
+
+#define BFA_TSKIM_MIN   4
+#define BFA_TSKIM_MAX   512
+#define BFA_FCPIM_PATHTOV_DEF	(30 * 1000)	/* in millisecs */
+#define BFA_FCPIM_PATHTOV_MAX	(90 * 1000)	/* in millisecs */
+
+#define bfa_fcpim_stats(__fcpim, __stats)   \
+    (__fcpim)->stats.__stats ++
+
+struct bfa_fcpim_mod_s {
+	struct bfa_s 	*bfa;
+	struct bfa_itnim_s 	*itnim_arr;
+	struct bfa_ioim_s 	*ioim_arr;
+	struct bfa_ioim_sp_s *ioim_sp_arr;
+	struct bfa_tskim_s 	*tskim_arr;
+	struct bfa_dma_s	snsbase;
+	int			num_itnims;
+	int			num_ioim_reqs;
+	int			num_tskim_reqs;
+	u32		path_tov;
+	u16		q_depth;
+	u16		rsvd;
+	struct list_head 	itnim_q;        /*  queue of active itnim    */
+	struct list_head 	ioim_free_q;    /*  free IO resources        */
+	struct list_head 	ioim_resfree_q; /*  IOs waiting for f/w      */
+	struct list_head 	ioim_comp_q;    /*  IO global comp Q         */
+	struct list_head 	tskim_free_q;
+	u32	ios_active;	/*  current active IOs	      */
+	u32	delay_comp;
+	struct bfa_fcpim_stats_s stats;
+};
+
+struct bfa_ioim_s;
+struct bfa_tskim_s;
+
+/**
+ * BFA IO (initiator mode)
+ */
+struct bfa_ioim_s {
+	struct list_head qe;		/*  queue elememt            */
+	bfa_sm_t		sm; 	/*  BFA ioim state machine   */
+	struct bfa_s 	        *bfa;	/*  BFA module               */
+	struct bfa_fcpim_mod_s	*fcpim;	/*  parent fcpim module      */
+	struct bfa_itnim_s 	*itnim;	/*  i-t-n nexus for this IO  */
+	struct bfad_ioim_s 	*dio;	/*  driver IO handle         */
+	u16	iotag;		/*  FWI IO tag               */
+	u16	abort_tag;	/*  unqiue abort request tag */
+	u16	nsges;		/*  number of SG elements    */
+	u16	nsgpgs;		/*  number of SG pages       */
+	struct bfa_sgpg_s *sgpg;	/*  first SG page            */
+	struct list_head sgpg_q;		/*  allocated SG pages       */
+	struct bfa_cb_qe_s hcb_qe;	/*  bfa callback qelem       */
+	bfa_cb_cbfn_t io_cbfn;		/*  IO completion handler    */
+	struct bfa_ioim_sp_s *iosp;	/*  slow-path IO handling    */
+};
+
+struct bfa_ioim_sp_s {
+	struct bfi_msg_s 	comp_rspmsg;	/*  IO comp f/w response     */
+	u8			*snsinfo;	/*  sense info for this IO   */
+	struct bfa_sgpg_wqe_s sgpg_wqe;	/*  waitq elem for sgpg      */
+	struct bfa_reqq_wait_s reqq_wait;	/*  to wait for room in reqq */
+	bfa_boolean_t		abort_explicit;	/*  aborted by OS            */
+	struct bfa_tskim_s	*tskim;		/*  Relevant TM cmd          */
+};
+
+/**
+ * BFA Task management command (initiator mode)
+ */
+struct bfa_tskim_s {
+	struct list_head          qe;
+	bfa_sm_t		sm;
+	struct bfa_s            *bfa;        /*  BFA module  */
+	struct bfa_fcpim_mod_s  *fcpim;      /*  parent fcpim module      */
+	struct bfa_itnim_s      *itnim;      /*  i-t-n nexus for this IO  */
+	struct bfad_tskim_s         *dtsk;   /*  driver task mgmt cmnd    */
+	bfa_boolean_t        notify;         /*  notify itnim on TM comp  */
+	lun_t                lun;            /*  lun if applicable        */
+	enum fcp_tm_cmnd        tm_cmnd;     /*  task management command  */
+	u16             tsk_tag;        /*  FWI IO tag               */
+	u8              tsecs;          /*  timeout in seconds       */
+	struct bfa_reqq_wait_s  reqq_wait;   /*  to wait for room in reqq */
+	struct list_head              io_q;    /*  queue of affected IOs    */
+	struct bfa_wc_s             wc;      /*  waiting counter          */
+	struct bfa_cb_qe_s	hcb_qe;      /*  bfa callback qelem       */
+	enum bfi_tskim_status   tsk_status;  /*  TM status                */
+};
+
+/**
+ * BFA i-t-n (initiator mode)
+ */
+struct bfa_itnim_s {
+	struct list_head    qe;		/*  queue element               */
+	bfa_sm_t	  sm;		/*  i-t-n im BFA state machine  */
+	struct bfa_s      *bfa;		/*  bfa instance                */
+	struct bfa_rport_s *rport;	/*  bfa rport                   */
+	void           *ditn;		/*  driver i-t-n structure      */
+	struct bfi_mhdr_s      mhdr;	/*  pre-built mhdr              */
+	u8         msg_no;		/*  itnim/rport firmware handle */
+	u8         reqq;		/*  CQ for requests             */
+	struct bfa_cb_qe_s    hcb_qe;	/*  bfa callback qelem          */
+	struct list_head pending_q;	/*  queue of pending IO requests*/
+	struct list_head io_q;		/*  queue of active IO requests */
+	struct list_head io_cleanup_q;	/*  IO being cleaned up         */
+	struct list_head tsk_q;		/*  queue of active TM commands */
+	struct list_head  delay_comp_q;/*  queue of failed inflight cmds */
+	bfa_boolean_t   seq_rec;	/*  SQER supported              */
+	bfa_boolean_t   is_online;	/*  itnim is ONLINE for IO      */
+	bfa_boolean_t   iotov_active;	/*  IO TOV timer is active	 */
+	struct bfa_wc_s        wc;	/*  waiting counter             */
+	struct bfa_timer_s timer;	/*  pending IO TOV		 */
+	struct bfa_reqq_wait_s reqq_wait; /*  to wait for room in reqq */
+	struct bfa_fcpim_mod_s *fcpim;	/*  fcpim module                */
+	struct bfa_itnim_hal_stats_s	stats;
+};
+
+#define bfa_itnim_is_online(_itnim) (_itnim)->is_online
+#define BFA_FCPIM_MOD(_hal) (&(_hal)->modules.fcpim_mod)
+#define BFA_IOIM_FROM_TAG(_fcpim, _iotag)	\
+	(&fcpim->ioim_arr[_iotag])
+#define BFA_TSKIM_FROM_TAG(_fcpim, _tmtag)                  \
+    (&fcpim->tskim_arr[_tmtag & (fcpim->num_tskim_reqs - 1)])
+
+/*
+ * function prototypes
+ */
+void            bfa_ioim_attach(struct bfa_fcpim_mod_s *fcpim,
+				    struct bfa_meminfo_s *minfo);
+void            bfa_ioim_detach(struct bfa_fcpim_mod_s *fcpim);
+void            bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+void            bfa_ioim_good_comp_isr(struct bfa_s *bfa,
+					struct bfi_msg_s *msg);
+void            bfa_ioim_cleanup(struct bfa_ioim_s *ioim);
+void            bfa_ioim_cleanup_tm(struct bfa_ioim_s *ioim,
+					struct bfa_tskim_s *tskim);
+void            bfa_ioim_iocdisable(struct bfa_ioim_s *ioim);
+void            bfa_ioim_tov(struct bfa_ioim_s *ioim);
+
+void            bfa_tskim_attach(struct bfa_fcpim_mod_s *fcpim,
+				     struct bfa_meminfo_s *minfo);
+void            bfa_tskim_detach(struct bfa_fcpim_mod_s *fcpim);
+void            bfa_tskim_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+void            bfa_tskim_iodone(struct bfa_tskim_s *tskim);
+void            bfa_tskim_iocdisable(struct bfa_tskim_s *tskim);
+void            bfa_tskim_cleanup(struct bfa_tskim_s *tskim);
+
+void            bfa_itnim_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+				      u32 *dm_len);
+void            bfa_itnim_attach(struct bfa_fcpim_mod_s *fcpim,
+				     struct bfa_meminfo_s *minfo);
+void            bfa_itnim_detach(struct bfa_fcpim_mod_s *fcpim);
+void            bfa_itnim_iocdisable(struct bfa_itnim_s *itnim);
+void            bfa_itnim_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+void            bfa_itnim_iodone(struct bfa_itnim_s *itnim);
+void            bfa_itnim_tskdone(struct bfa_itnim_s *itnim);
+bfa_boolean_t   bfa_itnim_hold_io(struct bfa_itnim_s *itnim);
+
+#endif /* __BFA_FCPIM_PRIV_H__ */
+
diff --git a/drivers/scsi/bfa/bfa_fcport.c b/drivers/scsi/bfa/bfa_fcport.c
new file mode 100644
index 000000000000..992435987deb
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fcport.c
@@ -0,0 +1,1671 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_pport.h>
+#include <cs/bfa_debug.h>
+#include <aen/bfa_aen.h>
+#include <cs/bfa_plog.h>
+#include <aen/bfa_aen_port.h>
+
+BFA_TRC_FILE(HAL, PPORT);
+BFA_MODULE(pport);
+
+#define bfa_pport_callback(__pport, __event) do {			\
+	if ((__pport)->bfa->fcs) {      \
+		(__pport)->event_cbfn((__pport)->event_cbarg, (__event));      \
+	} else {							\
+		(__pport)->hcb_event = (__event);      \
+		bfa_cb_queue((__pport)->bfa, &(__pport)->hcb_qe,	\
+		__bfa_cb_port_event, (__pport));      \
+	}								\
+} while (0)
+
+/*
+ * The port is considered disabled if corresponding physical port or IOC are
+ * disabled explicitly
+ */
+#define BFA_PORT_IS_DISABLED(bfa) \
+	((bfa_pport_is_disabled(bfa) == BFA_TRUE) || \
+	(bfa_ioc_is_disabled(&bfa->ioc) == BFA_TRUE))
+
+/*
+ * forward declarations
+ */
+static bfa_boolean_t bfa_pport_send_enable(struct bfa_pport_s *port);
+static bfa_boolean_t bfa_pport_send_disable(struct bfa_pport_s *port);
+static void     bfa_pport_update_linkinfo(struct bfa_pport_s *pport);
+static void     bfa_pport_reset_linkinfo(struct bfa_pport_s *pport);
+static void     bfa_pport_set_wwns(struct bfa_pport_s *port);
+static void     __bfa_cb_port_event(void *cbarg, bfa_boolean_t complete);
+static void     __bfa_cb_port_stats(void *cbarg, bfa_boolean_t complete);
+static void     __bfa_cb_port_stats_clr(void *cbarg, bfa_boolean_t complete);
+static void     bfa_port_stats_timeout(void *cbarg);
+static void     bfa_port_stats_clr_timeout(void *cbarg);
+
+/**
+ *  bfa_pport_private
+ */
+
+/**
+ * BFA port state machine events
+ */
+enum bfa_pport_sm_event {
+	BFA_PPORT_SM_START = 1,	/*  start port state machine */
+	BFA_PPORT_SM_STOP = 2,	/*  stop port state machine */
+	BFA_PPORT_SM_ENABLE = 3,	/*  enable port */
+	BFA_PPORT_SM_DISABLE = 4,	/*  disable port state machine */
+	BFA_PPORT_SM_FWRSP = 5,	/*  firmware enable/disable rsp */
+	BFA_PPORT_SM_LINKUP = 6,	/*  firmware linkup event */
+	BFA_PPORT_SM_LINKDOWN = 7,	/*  firmware linkup down */
+	BFA_PPORT_SM_QRESUME = 8,	/*  CQ space available */
+	BFA_PPORT_SM_HWFAIL = 9,	/*  IOC h/w failure */
+};
+
+static void     bfa_pport_sm_uninit(struct bfa_pport_s *pport,
+				    enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_enabling_qwait(struct bfa_pport_s *pport,
+					    enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_enabling(struct bfa_pport_s *pport,
+				      enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_linkdown(struct bfa_pport_s *pport,
+				      enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_linkup(struct bfa_pport_s *pport,
+				    enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_disabling(struct bfa_pport_s *pport,
+				       enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_disabling_qwait(struct bfa_pport_s *pport,
+					     enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_disabled(struct bfa_pport_s *pport,
+				      enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_stopped(struct bfa_pport_s *pport,
+				     enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_iocdown(struct bfa_pport_s *pport,
+				     enum bfa_pport_sm_event event);
+static void     bfa_pport_sm_iocfail(struct bfa_pport_s *pport,
+				     enum bfa_pport_sm_event event);
+
+static struct bfa_sm_table_s hal_pport_sm_table[] = {
+	{BFA_SM(bfa_pport_sm_uninit), BFA_PPORT_ST_UNINIT},
+	{BFA_SM(bfa_pport_sm_enabling_qwait), BFA_PPORT_ST_ENABLING_QWAIT},
+	{BFA_SM(bfa_pport_sm_enabling), BFA_PPORT_ST_ENABLING},
+	{BFA_SM(bfa_pport_sm_linkdown), BFA_PPORT_ST_LINKDOWN},
+	{BFA_SM(bfa_pport_sm_linkup), BFA_PPORT_ST_LINKUP},
+	{BFA_SM(bfa_pport_sm_disabling_qwait),
+	 BFA_PPORT_ST_DISABLING_QWAIT},
+	{BFA_SM(bfa_pport_sm_disabling), BFA_PPORT_ST_DISABLING},
+	{BFA_SM(bfa_pport_sm_disabled), BFA_PPORT_ST_DISABLED},
+	{BFA_SM(bfa_pport_sm_stopped), BFA_PPORT_ST_STOPPED},
+	{BFA_SM(bfa_pport_sm_iocdown), BFA_PPORT_ST_IOCDOWN},
+	{BFA_SM(bfa_pport_sm_iocfail), BFA_PPORT_ST_IOCDOWN},
+};
+
+static void
+bfa_pport_aen_post(struct bfa_pport_s *pport, enum bfa_port_aen_event event)
+{
+	union bfa_aen_data_u aen_data;
+	struct bfa_log_mod_s *logmod = pport->bfa->logm;
+	wwn_t           pwwn = pport->pwwn;
+	char            pwwn_ptr[BFA_STRING_32];
+	struct bfa_ioc_attr_s ioc_attr;
+
+	wwn2str(pwwn_ptr, pwwn);
+	switch (event) {
+	case BFA_PORT_AEN_ONLINE:
+		bfa_log(logmod, BFA_AEN_PORT_ONLINE, pwwn_ptr);
+		break;
+	case BFA_PORT_AEN_OFFLINE:
+		bfa_log(logmod, BFA_AEN_PORT_OFFLINE, pwwn_ptr);
+		break;
+	case BFA_PORT_AEN_ENABLE:
+		bfa_log(logmod, BFA_AEN_PORT_ENABLE, pwwn_ptr);
+		break;
+	case BFA_PORT_AEN_DISABLE:
+		bfa_log(logmod, BFA_AEN_PORT_DISABLE, pwwn_ptr);
+		break;
+	case BFA_PORT_AEN_DISCONNECT:
+		bfa_log(logmod, BFA_AEN_PORT_DISCONNECT, pwwn_ptr);
+		break;
+	case BFA_PORT_AEN_QOS_NEG:
+		bfa_log(logmod, BFA_AEN_PORT_QOS_NEG, pwwn_ptr);
+		break;
+	default:
+		break;
+	}
+
+	bfa_ioc_get_attr(&pport->bfa->ioc, &ioc_attr);
+	aen_data.port.ioc_type = ioc_attr.ioc_type;
+	aen_data.port.pwwn = pwwn;
+}
+
+static void
+bfa_pport_sm_uninit(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_START:
+		/**
+		 * Start event after IOC is configured and BFA is started.
+		 */
+		if (bfa_pport_send_enable(pport))
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+		else
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+		break;
+
+	case BFA_PPORT_SM_ENABLE:
+		/**
+		 * Port is persistently configured to be in enabled state. Do
+		 * not change state. Port enabling is done when START event is
+		 * received.
+		 */
+		break;
+
+	case BFA_PPORT_SM_DISABLE:
+		/**
+		 * If a port is persistently configured to be disabled, the
+		 * first event will a port disable request.
+		 */
+		bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+		break;
+
+	case BFA_PPORT_SM_HWFAIL:
+		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+		break;
+
+	default:
+		bfa_sm_fault(pport->bfa, event);
+	}
+}
+
+static void
+bfa_pport_sm_enabling_qwait(struct bfa_pport_s *pport,
+			    enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_QRESUME:
+		bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+		bfa_pport_send_enable(pport);
+		break;
+
+	case BFA_PPORT_SM_STOP:
+		bfa_reqq_wcancel(&pport->reqq_wait);
+		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+		break;
+
+	case BFA_PPORT_SM_ENABLE:
+		/**
+		 * Already enable is in progress.
+		 */
+		break;
+
+	case BFA_PPORT_SM_DISABLE:
+		/**
+		 * Just send disable request to firmware when room becomes
+		 * available in request queue.
+		 */
+		bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+		bfa_reqq_wcancel(&pport->reqq_wait);
+		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+			     BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
+		bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+		break;
+
+	case BFA_PPORT_SM_LINKUP:
+	case BFA_PPORT_SM_LINKDOWN:
+		/**
+		 * Possible to get link events when doing back-to-back
+		 * enable/disables.
+		 */
+		break;
+
+	case BFA_PPORT_SM_HWFAIL:
+		bfa_reqq_wcancel(&pport->reqq_wait);
+		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+		break;
+
+	default:
+		bfa_sm_fault(pport->bfa, event);
+	}
+}
+
+static void
+bfa_pport_sm_enabling(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_FWRSP:
+	case BFA_PPORT_SM_LINKDOWN:
+		bfa_sm_set_state(pport, bfa_pport_sm_linkdown);
+		break;
+
+	case BFA_PPORT_SM_LINKUP:
+		bfa_pport_update_linkinfo(pport);
+		bfa_sm_set_state(pport, bfa_pport_sm_linkup);
+
+		bfa_assert(pport->event_cbfn);
+		bfa_pport_callback(pport, BFA_PPORT_LINKUP);
+		break;
+
+	case BFA_PPORT_SM_ENABLE:
+		/**
+		 * Already being enabled.
+		 */
+		break;
+
+	case BFA_PPORT_SM_DISABLE:
+		if (bfa_pport_send_disable(pport))
+			bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+		else
+			bfa_sm_set_state(pport, bfa_pport_sm_disabling_qwait);
+
+		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+			     BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
+		bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+		break;
+
+	case BFA_PPORT_SM_STOP:
+		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+		break;
+
+	case BFA_PPORT_SM_HWFAIL:
+		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+		break;
+
+	default:
+		bfa_sm_fault(pport->bfa, event);
+	}
+}
+
+static void
+bfa_pport_sm_linkdown(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_LINKUP:
+		bfa_pport_update_linkinfo(pport);
+		bfa_sm_set_state(pport, bfa_pport_sm_linkup);
+		bfa_assert(pport->event_cbfn);
+		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+			     BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkup");
+		bfa_pport_callback(pport, BFA_PPORT_LINKUP);
+		bfa_pport_aen_post(pport, BFA_PORT_AEN_ONLINE);
+		/**
+		 * If QoS is enabled and it is not online,
+		 * Send a separate event.
+		 */
+		if ((pport->cfg.qos_enabled)
+		    && (bfa_os_ntohl(pport->qos_attr.state) != BFA_QOS_ONLINE))
+			bfa_pport_aen_post(pport, BFA_PORT_AEN_QOS_NEG);
+
+		break;
+
+	case BFA_PPORT_SM_LINKDOWN:
+		/**
+		 * Possible to get link down event.
+		 */
+		break;
+
+	case BFA_PPORT_SM_ENABLE:
+		/**
+		 * Already enabled.
+		 */
+		break;
+
+	case BFA_PPORT_SM_DISABLE:
+		if (bfa_pport_send_disable(pport))
+			bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+		else
+			bfa_sm_set_state(pport, bfa_pport_sm_disabling_qwait);
+
+		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+			     BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
+		bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+		break;
+
+	case BFA_PPORT_SM_STOP:
+		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+		break;
+
+	case BFA_PPORT_SM_HWFAIL:
+		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+		break;
+
+	default:
+		bfa_sm_fault(pport->bfa, event);
+	}
+}
+
+static void
+bfa_pport_sm_linkup(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_ENABLE:
+		/**
+		 * Already enabled.
+		 */
+		break;
+
+	case BFA_PPORT_SM_DISABLE:
+		if (bfa_pport_send_disable(pport))
+			bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+		else
+			bfa_sm_set_state(pport, bfa_pport_sm_disabling_qwait);
+
+		bfa_pport_reset_linkinfo(pport);
+		bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
+		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+			     BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
+		bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+		bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+		break;
+
+	case BFA_PPORT_SM_LINKDOWN:
+		bfa_sm_set_state(pport, bfa_pport_sm_linkdown);
+		bfa_pport_reset_linkinfo(pport);
+		bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
+		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+			     BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkdown");
+		if (BFA_PORT_IS_DISABLED(pport->bfa)) {
+			bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+		} else {
+			bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
+		}
+		break;
+
+	case BFA_PPORT_SM_STOP:
+		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+		bfa_pport_reset_linkinfo(pport);
+		if (BFA_PORT_IS_DISABLED(pport->bfa)) {
+			bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+		} else {
+			bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
+		}
+		break;
+
+	case BFA_PPORT_SM_HWFAIL:
+		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+		bfa_pport_reset_linkinfo(pport);
+		bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
+		if (BFA_PORT_IS_DISABLED(pport->bfa)) {
+			bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+		} else {
+			bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
+		}
+		break;
+
+	default:
+		bfa_sm_fault(pport->bfa, event);
+	}
+}
+
+static void
+bfa_pport_sm_disabling_qwait(struct bfa_pport_s *pport,
+			     enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_QRESUME:
+		bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+		bfa_pport_send_disable(pport);
+		break;
+
+	case BFA_PPORT_SM_STOP:
+		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+		bfa_reqq_wcancel(&pport->reqq_wait);
+		break;
+
+	case BFA_PPORT_SM_DISABLE:
+		/**
+		 * Already being disabled.
+		 */
+		break;
+
+	case BFA_PPORT_SM_LINKUP:
+	case BFA_PPORT_SM_LINKDOWN:
+		/**
+		 * Possible to get link events when doing back-to-back
+		 * enable/disables.
+		 */
+		break;
+
+	case BFA_PPORT_SM_HWFAIL:
+		bfa_sm_set_state(pport, bfa_pport_sm_iocfail);
+		bfa_reqq_wcancel(&pport->reqq_wait);
+		break;
+
+	default:
+		bfa_sm_fault(pport->bfa, event);
+	}
+}
+
+static void
+bfa_pport_sm_disabling(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_FWRSP:
+		bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+		break;
+
+	case BFA_PPORT_SM_DISABLE:
+		/**
+		 * Already being disabled.
+		 */
+		break;
+
+	case BFA_PPORT_SM_ENABLE:
+		if (bfa_pport_send_enable(pport))
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+		else
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+
+		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+			     BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
+		bfa_pport_aen_post(pport, BFA_PORT_AEN_ENABLE);
+		break;
+
+	case BFA_PPORT_SM_STOP:
+		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+		break;
+
+	case BFA_PPORT_SM_LINKUP:
+	case BFA_PPORT_SM_LINKDOWN:
+		/**
+		 * Possible to get link events when doing back-to-back
+		 * enable/disables.
+		 */
+		break;
+
+	case BFA_PPORT_SM_HWFAIL:
+		bfa_sm_set_state(pport, bfa_pport_sm_iocfail);
+		break;
+
+	default:
+		bfa_sm_fault(pport->bfa, event);
+	}
+}
+
+static void
+bfa_pport_sm_disabled(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_START:
+		/**
+		 * Ignore start event for a port that is disabled.
+		 */
+		break;
+
+	case BFA_PPORT_SM_STOP:
+		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+		break;
+
+	case BFA_PPORT_SM_ENABLE:
+		if (bfa_pport_send_enable(pport))
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+		else
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+
+		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+			     BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
+		bfa_pport_aen_post(pport, BFA_PORT_AEN_ENABLE);
+		break;
+
+	case BFA_PPORT_SM_DISABLE:
+		/**
+		 * Already disabled.
+		 */
+		break;
+
+	case BFA_PPORT_SM_HWFAIL:
+		bfa_sm_set_state(pport, bfa_pport_sm_iocfail);
+		break;
+
+	default:
+		bfa_sm_fault(pport->bfa, event);
+	}
+}
+
+static void
+bfa_pport_sm_stopped(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_START:
+		if (bfa_pport_send_enable(pport))
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+		else
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+		break;
+
+	default:
+		/**
+		 * Ignore all other events.
+		 */
+		;
+	}
+}
+
+/**
+ * Port is enabled. IOC is down/failed.
+ */
+static void
+bfa_pport_sm_iocdown(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_START:
+		if (bfa_pport_send_enable(pport))
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+		else
+			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+		break;
+
+	default:
+		/**
+		 * Ignore all events.
+		 */
+		;
+	}
+}
+
+/**
+ * Port is disabled. IOC is down/failed.
+ */
+static void
+bfa_pport_sm_iocfail(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+	bfa_trc(pport->bfa, event);
+
+	switch (event) {
+	case BFA_PPORT_SM_START:
+		bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+		break;
+
+	case BFA_PPORT_SM_ENABLE:
+		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+		break;
+
+	default:
+		/**
+		 * Ignore all events.
+		 */
+		;
+	}
+}
+
+
+
+/**
+ *  bfa_pport_private
+ */
+
+static void
+__bfa_cb_port_event(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_pport_s *pport = cbarg;
+
+	if (complete)
+		pport->event_cbfn(pport->event_cbarg, pport->hcb_event);
+}
+
+#define PPORT_STATS_DMA_SZ (BFA_ROUNDUP(sizeof(union bfa_pport_stats_u), \
+							BFA_CACHELINE_SZ))
+
+static void
+bfa_pport_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len,
+		  u32 *dm_len)
+{
+	*dm_len += PPORT_STATS_DMA_SZ;
+}
+
+static void
+bfa_pport_qresume(void *cbarg)
+{
+	struct bfa_pport_s *port = cbarg;
+
+	bfa_sm_send_event(port, BFA_PPORT_SM_QRESUME);
+}
+
+static void
+bfa_pport_mem_claim(struct bfa_pport_s *pport, struct bfa_meminfo_s *meminfo)
+{
+	u8        *dm_kva;
+	u64        dm_pa;
+
+	dm_kva = bfa_meminfo_dma_virt(meminfo);
+	dm_pa = bfa_meminfo_dma_phys(meminfo);
+
+	pport->stats_kva = dm_kva;
+	pport->stats_pa = dm_pa;
+	pport->stats = (union bfa_pport_stats_u *)dm_kva;
+
+	dm_kva += PPORT_STATS_DMA_SZ;
+	dm_pa += PPORT_STATS_DMA_SZ;
+
+	bfa_meminfo_dma_virt(meminfo) = dm_kva;
+	bfa_meminfo_dma_phys(meminfo) = dm_pa;
+}
+
+/**
+ * Memory initialization.
+ */
+static void
+bfa_pport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+		 struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_pport_cfg_s *port_cfg = &pport->cfg;
+
+	bfa_os_memset(pport, 0, sizeof(struct bfa_pport_s));
+	pport->bfa = bfa;
+
+	bfa_pport_mem_claim(pport, meminfo);
+
+	bfa_sm_set_state(pport, bfa_pport_sm_uninit);
+
+	/**
+	 * initialize and set default configuration
+	 */
+	port_cfg->topology = BFA_PPORT_TOPOLOGY_P2P;
+	port_cfg->speed = BFA_PPORT_SPEED_AUTO;
+	port_cfg->trunked = BFA_FALSE;
+	port_cfg->maxfrsize = 0;
+
+	port_cfg->trl_def_speed = BFA_PPORT_SPEED_1GBPS;
+
+	bfa_reqq_winit(&pport->reqq_wait, bfa_pport_qresume, pport);
+}
+
+static void
+bfa_pport_initdone(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	/**
+	 * Initialize port attributes from IOC hardware data.
+	 */
+	bfa_pport_set_wwns(pport);
+	if (pport->cfg.maxfrsize == 0)
+		pport->cfg.maxfrsize = bfa_ioc_maxfrsize(&bfa->ioc);
+	pport->cfg.rx_bbcredit = bfa_ioc_rx_bbcredit(&bfa->ioc);
+	pport->speed_sup = bfa_ioc_speed_sup(&bfa->ioc);
+
+	bfa_assert(pport->cfg.maxfrsize);
+	bfa_assert(pport->cfg.rx_bbcredit);
+	bfa_assert(pport->speed_sup);
+}
+
+static void
+bfa_pport_detach(struct bfa_s *bfa)
+{
+}
+
+/**
+ * Called when IOC is ready.
+ */
+static void
+bfa_pport_start(struct bfa_s *bfa)
+{
+	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_START);
+}
+
+/**
+ * Called before IOC is stopped.
+ */
+static void
+bfa_pport_stop(struct bfa_s *bfa)
+{
+	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_STOP);
+}
+
+/**
+ * Called when IOC failure is detected.
+ */
+static void
+bfa_pport_iocdisable(struct bfa_s *bfa)
+{
+	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_HWFAIL);
+}
+
+static void
+bfa_pport_update_linkinfo(struct bfa_pport_s *pport)
+{
+	struct bfi_pport_event_s *pevent = pport->event_arg.i2hmsg.event;
+
+	pport->speed = pevent->link_state.speed;
+	pport->topology = pevent->link_state.topology;
+
+	if (pport->topology == BFA_PPORT_TOPOLOGY_LOOP)
+		pport->myalpa = pevent->link_state.tl.loop_info.myalpa;
+
+	/*
+	 * QoS Details
+	 */
+	bfa_os_assign(pport->qos_attr, pevent->link_state.qos_attr);
+	bfa_os_assign(pport->qos_vc_attr, pevent->link_state.qos_vc_attr);
+
+	bfa_trc(pport->bfa, pport->speed);
+	bfa_trc(pport->bfa, pport->topology);
+}
+
+static void
+bfa_pport_reset_linkinfo(struct bfa_pport_s *pport)
+{
+	pport->speed = BFA_PPORT_SPEED_UNKNOWN;
+	pport->topology = BFA_PPORT_TOPOLOGY_NONE;
+}
+
+/**
+ * Send port enable message to firmware.
+ */
+static          bfa_boolean_t
+bfa_pport_send_enable(struct bfa_pport_s *port)
+{
+	struct bfi_pport_enable_req_s *m;
+
+	/**
+	 * Increment message tag before queue check, so that responses to old
+	 * requests are discarded.
+	 */
+	port->msgtag++;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+	if (!m) {
+		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->reqq_wait);
+		return BFA_FALSE;
+	}
+
+	bfi_h2i_set(m->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_ENABLE_REQ,
+		    bfa_lpuid(port->bfa));
+	m->nwwn = port->nwwn;
+	m->pwwn = port->pwwn;
+	m->port_cfg = port->cfg;
+	m->msgtag = port->msgtag;
+	m->port_cfg.maxfrsize = bfa_os_htons(port->cfg.maxfrsize);
+	bfa_dma_be_addr_set(m->stats_dma_addr, port->stats_pa);
+	bfa_trc(port->bfa, m->stats_dma_addr.a32.addr_lo);
+	bfa_trc(port->bfa, m->stats_dma_addr.a32.addr_hi);
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+	return BFA_TRUE;
+}
+
+/**
+ * Send port disable message to firmware.
+ */
+static          bfa_boolean_t
+bfa_pport_send_disable(struct bfa_pport_s *port)
+{
+	bfi_pport_disable_req_t *m;
+
+	/**
+	 * Increment message tag before queue check, so that responses to old
+	 * requests are discarded.
+	 */
+	port->msgtag++;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+	if (!m) {
+		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->reqq_wait);
+		return BFA_FALSE;
+	}
+
+	bfi_h2i_set(m->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_DISABLE_REQ,
+		    bfa_lpuid(port->bfa));
+	m->msgtag = port->msgtag;
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+
+	return BFA_TRUE;
+}
+
+static void
+bfa_pport_set_wwns(struct bfa_pport_s *port)
+{
+	port->pwwn = bfa_ioc_get_pwwn(&port->bfa->ioc);
+	port->nwwn = bfa_ioc_get_nwwn(&port->bfa->ioc);
+
+	bfa_trc(port->bfa, port->pwwn);
+	bfa_trc(port->bfa, port->nwwn);
+}
+
+static void
+bfa_port_send_txcredit(void *port_cbarg)
+{
+
+	struct bfa_pport_s *port = port_cbarg;
+	struct bfi_pport_set_svc_params_req_s *m;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+	if (!m) {
+		bfa_trc(port->bfa, port->cfg.tx_bbcredit);
+		return;
+	}
+
+	bfi_h2i_set(m->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_SET_SVC_PARAMS_REQ,
+		    bfa_lpuid(port->bfa));
+	m->tx_bbcredit = bfa_os_htons((u16) port->cfg.tx_bbcredit);
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+}
+
+
+
+/**
+ *  bfa_pport_public
+ */
+
+/**
+ * Firmware message handler.
+ */
+void
+bfa_pport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	union bfi_pport_i2h_msg_u i2hmsg;
+
+	i2hmsg.msg = msg;
+	pport->event_arg.i2hmsg = i2hmsg;
+
+	switch (msg->mhdr.msg_id) {
+	case BFI_PPORT_I2H_ENABLE_RSP:
+		if (pport->msgtag == i2hmsg.enable_rsp->msgtag)
+			bfa_sm_send_event(pport, BFA_PPORT_SM_FWRSP);
+		break;
+
+	case BFI_PPORT_I2H_DISABLE_RSP:
+		if (pport->msgtag == i2hmsg.enable_rsp->msgtag)
+			bfa_sm_send_event(pport, BFA_PPORT_SM_FWRSP);
+		break;
+
+	case BFI_PPORT_I2H_EVENT:
+		switch (i2hmsg.event->link_state.linkstate) {
+		case BFA_PPORT_LINKUP:
+			bfa_sm_send_event(pport, BFA_PPORT_SM_LINKUP);
+			break;
+		case BFA_PPORT_LINKDOWN:
+			bfa_sm_send_event(pport, BFA_PPORT_SM_LINKDOWN);
+			break;
+		case BFA_PPORT_TRUNK_LINKDOWN:
+			/** todo: event notification */
+			break;
+		}
+		break;
+
+	case BFI_PPORT_I2H_GET_STATS_RSP:
+	case BFI_PPORT_I2H_GET_QOS_STATS_RSP:
+		/*
+		 * check for timer pop before processing the rsp
+		 */
+		if (pport->stats_busy == BFA_FALSE
+		    || pport->stats_status == BFA_STATUS_ETIMER)
+			break;
+
+		bfa_timer_stop(&pport->timer);
+		pport->stats_status = i2hmsg.getstats_rsp->status;
+		bfa_cb_queue(pport->bfa, &pport->hcb_qe, __bfa_cb_port_stats,
+			     pport);
+		break;
+	case BFI_PPORT_I2H_CLEAR_STATS_RSP:
+	case BFI_PPORT_I2H_CLEAR_QOS_STATS_RSP:
+		/*
+		 * check for timer pop before processing the rsp
+		 */
+		if (pport->stats_busy == BFA_FALSE
+		    || pport->stats_status == BFA_STATUS_ETIMER)
+			break;
+
+		bfa_timer_stop(&pport->timer);
+		pport->stats_status = BFA_STATUS_OK;
+		bfa_cb_queue(pport->bfa, &pport->hcb_qe,
+			     __bfa_cb_port_stats_clr, pport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  bfa_pport_api
+ */
+
+/**
+ * Registered callback for port events.
+ */
+void
+bfa_pport_event_register(struct bfa_s *bfa,
+			 void (*cbfn) (void *cbarg, bfa_pport_event_t event),
+			 void *cbarg)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	pport->event_cbfn = cbfn;
+	pport->event_cbarg = cbarg;
+}
+
+bfa_status_t
+bfa_pport_enable(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	if (pport->diag_busy)
+		return (BFA_STATUS_DIAG_BUSY);
+	else if (bfa_sm_cmp_state
+		 (BFA_PORT_MOD(bfa), bfa_pport_sm_disabling_qwait))
+		return (BFA_STATUS_DEVBUSY);
+
+	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_ENABLE);
+	return BFA_STATUS_OK;
+}
+
+bfa_status_t
+bfa_pport_disable(struct bfa_s *bfa)
+{
+	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_DISABLE);
+	return BFA_STATUS_OK;
+}
+
+/**
+ * Configure port speed.
+ */
+bfa_status_t
+bfa_pport_cfg_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, speed);
+
+	if ((speed != BFA_PPORT_SPEED_AUTO) && (speed > pport->speed_sup)) {
+		bfa_trc(bfa, pport->speed_sup);
+		return BFA_STATUS_UNSUPP_SPEED;
+	}
+
+	pport->cfg.speed = speed;
+
+	return (BFA_STATUS_OK);
+}
+
+/**
+ * Get current speed.
+ */
+enum bfa_pport_speed
+bfa_pport_get_speed(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	return port->speed;
+}
+
+/**
+ * Configure port topology.
+ */
+bfa_status_t
+bfa_pport_cfg_topology(struct bfa_s *bfa, enum bfa_pport_topology topology)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, topology);
+	bfa_trc(bfa, pport->cfg.topology);
+
+	switch (topology) {
+	case BFA_PPORT_TOPOLOGY_P2P:
+	case BFA_PPORT_TOPOLOGY_LOOP:
+	case BFA_PPORT_TOPOLOGY_AUTO:
+		break;
+
+	default:
+		return BFA_STATUS_EINVAL;
+	}
+
+	pport->cfg.topology = topology;
+	return (BFA_STATUS_OK);
+}
+
+/**
+ * Get current topology.
+ */
+enum bfa_pport_topology
+bfa_pport_get_topology(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	return port->topology;
+}
+
+bfa_status_t
+bfa_pport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, alpa);
+	bfa_trc(bfa, pport->cfg.cfg_hardalpa);
+	bfa_trc(bfa, pport->cfg.hardalpa);
+
+	pport->cfg.cfg_hardalpa = BFA_TRUE;
+	pport->cfg.hardalpa = alpa;
+
+	return (BFA_STATUS_OK);
+}
+
+bfa_status_t
+bfa_pport_clr_hardalpa(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, pport->cfg.cfg_hardalpa);
+	bfa_trc(bfa, pport->cfg.hardalpa);
+
+	pport->cfg.cfg_hardalpa = BFA_FALSE;
+	return (BFA_STATUS_OK);
+}
+
+bfa_boolean_t
+bfa_pport_get_hardalpa(struct bfa_s *bfa, u8 *alpa)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	*alpa = port->cfg.hardalpa;
+	return port->cfg.cfg_hardalpa;
+}
+
+u8
+bfa_pport_get_myalpa(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	return port->myalpa;
+}
+
+bfa_status_t
+bfa_pport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxfrsize)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, maxfrsize);
+	bfa_trc(bfa, pport->cfg.maxfrsize);
+
+	/*
+	 * with in range
+	 */
+	if ((maxfrsize > FC_MAX_PDUSZ) || (maxfrsize < FC_MIN_PDUSZ))
+		return (BFA_STATUS_INVLD_DFSZ);
+
+	/*
+	 * power of 2, if not the max frame size of 2112
+	 */
+	if ((maxfrsize != FC_MAX_PDUSZ) && (maxfrsize & (maxfrsize - 1)))
+		return (BFA_STATUS_INVLD_DFSZ);
+
+	pport->cfg.maxfrsize = maxfrsize;
+	return (BFA_STATUS_OK);
+}
+
+u16
+bfa_pport_get_maxfrsize(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	return port->cfg.maxfrsize;
+}
+
+u32
+bfa_pport_mypid(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	return port->mypid;
+}
+
+u8
+bfa_pport_get_rx_bbcredit(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	return port->cfg.rx_bbcredit;
+}
+
+void
+bfa_pport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	port->cfg.tx_bbcredit = (u8) tx_bbcredit;
+	bfa_port_send_txcredit(port);
+}
+
+/**
+ * Get port attributes.
+ */
+
+wwn_t
+bfa_pport_get_wwn(struct bfa_s *bfa, bfa_boolean_t node)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	if (node)
+		return pport->nwwn;
+	else
+		return pport->pwwn;
+}
+
+void
+bfa_pport_get_attr(struct bfa_s *bfa, struct bfa_pport_attr_s *attr)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_os_memset(attr, 0, sizeof(struct bfa_pport_attr_s));
+
+	attr->nwwn = pport->nwwn;
+	attr->pwwn = pport->pwwn;
+
+	bfa_os_memcpy(&attr->pport_cfg, &pport->cfg,
+		      sizeof(struct bfa_pport_cfg_s));
+	/*
+	 * speed attributes
+	 */
+	attr->pport_cfg.speed = pport->cfg.speed;
+	attr->speed_supported = pport->speed_sup;
+	attr->speed = pport->speed;
+	attr->cos_supported = FC_CLASS_3;
+
+	/*
+	 * topology attributes
+	 */
+	attr->pport_cfg.topology = pport->cfg.topology;
+	attr->topology = pport->topology;
+
+	/*
+	 * beacon attributes
+	 */
+	attr->beacon = pport->beacon;
+	attr->link_e2e_beacon = pport->link_e2e_beacon;
+	attr->plog_enabled = bfa_plog_get_setting(pport->bfa->plog);
+
+	attr->pport_cfg.path_tov = bfa_fcpim_path_tov_get(bfa);
+	attr->pport_cfg.q_depth = bfa_fcpim_qdepth_get(bfa);
+	attr->port_state = bfa_sm_to_state(hal_pport_sm_table, pport->sm);
+	if (bfa_ioc_is_disabled(&pport->bfa->ioc))
+		attr->port_state = BFA_PPORT_ST_IOCDIS;
+	else if (bfa_ioc_fw_mismatch(&pport->bfa->ioc))
+		attr->port_state = BFA_PPORT_ST_FWMISMATCH;
+}
+
+static void
+bfa_port_stats_query(void *cbarg)
+{
+	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+	bfi_pport_get_stats_req_t *msg;
+
+	msg = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+
+	if (!msg) {
+		port->stats_qfull = BFA_TRUE;
+		bfa_reqq_winit(&port->stats_reqq_wait, bfa_port_stats_query,
+			       port);
+		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->stats_reqq_wait);
+		return;
+	}
+	port->stats_qfull = BFA_FALSE;
+
+	bfa_os_memset(msg, 0, sizeof(bfi_pport_get_stats_req_t));
+	bfi_h2i_set(msg->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_GET_STATS_REQ,
+		    bfa_lpuid(port->bfa));
+	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+
+	return;
+}
+
+static void
+bfa_port_stats_clear(void *cbarg)
+{
+	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+	bfi_pport_clear_stats_req_t *msg;
+
+	msg = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+
+	if (!msg) {
+		port->stats_qfull = BFA_TRUE;
+		bfa_reqq_winit(&port->stats_reqq_wait, bfa_port_stats_clear,
+			       port);
+		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->stats_reqq_wait);
+		return;
+	}
+	port->stats_qfull = BFA_FALSE;
+
+	bfa_os_memset(msg, 0, sizeof(bfi_pport_clear_stats_req_t));
+	bfi_h2i_set(msg->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_CLEAR_STATS_REQ,
+		    bfa_lpuid(port->bfa));
+	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+	return;
+}
+
+static void
+bfa_port_qos_stats_clear(void *cbarg)
+{
+	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+	bfi_pport_clear_qos_stats_req_t *msg;
+
+	msg = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+
+	if (!msg) {
+		port->stats_qfull = BFA_TRUE;
+		bfa_reqq_winit(&port->stats_reqq_wait, bfa_port_qos_stats_clear,
+			       port);
+		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->stats_reqq_wait);
+		return;
+	}
+	port->stats_qfull = BFA_FALSE;
+
+	bfa_os_memset(msg, 0, sizeof(bfi_pport_clear_qos_stats_req_t));
+	bfi_h2i_set(msg->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ,
+		    bfa_lpuid(port->bfa));
+	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+	return;
+}
+
+static void
+bfa_pport_stats_swap(union bfa_pport_stats_u *d, union bfa_pport_stats_u *s)
+{
+	u32       *dip = (u32 *) d;
+	u32       *sip = (u32 *) s;
+	int             i;
+
+	/*
+	 * Do 64 bit fields swap first
+	 */
+	for (i = 0;
+	     i <
+	     ((sizeof(union bfa_pport_stats_u) -
+	       sizeof(struct bfa_qos_stats_s)) / sizeof(u32)); i = i + 2) {
+#ifdef __BIGENDIAN
+		dip[i] = bfa_os_ntohl(sip[i]);
+		dip[i + 1] = bfa_os_ntohl(sip[i + 1]);
+#else
+		dip[i] = bfa_os_ntohl(sip[i + 1]);
+		dip[i + 1] = bfa_os_ntohl(sip[i]);
+#endif
+	}
+
+	/*
+	 * Now swap the 32 bit fields
+	 */
+	for (; i < (sizeof(union bfa_pport_stats_u) / sizeof(u32)); ++i)
+		dip[i] = bfa_os_ntohl(sip[i]);
+}
+
+static void
+__bfa_cb_port_stats_clr(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_pport_s *port = cbarg;
+
+	if (complete) {
+		port->stats_cbfn(port->stats_cbarg, port->stats_status);
+	} else {
+		port->stats_busy = BFA_FALSE;
+		port->stats_status = BFA_STATUS_OK;
+	}
+}
+
+static void
+bfa_port_stats_clr_timeout(void *cbarg)
+{
+	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+
+	bfa_trc(port->bfa, port->stats_qfull);
+
+	if (port->stats_qfull) {
+		bfa_reqq_wcancel(&port->stats_reqq_wait);
+		port->stats_qfull = BFA_FALSE;
+	}
+
+	port->stats_status = BFA_STATUS_ETIMER;
+	bfa_cb_queue(port->bfa, &port->hcb_qe, __bfa_cb_port_stats_clr, port);
+}
+
+static void
+__bfa_cb_port_stats(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_pport_s *port = cbarg;
+
+	if (complete) {
+		if (port->stats_status == BFA_STATUS_OK)
+			bfa_pport_stats_swap(port->stats_ret, port->stats);
+		port->stats_cbfn(port->stats_cbarg, port->stats_status);
+	} else {
+		port->stats_busy = BFA_FALSE;
+		port->stats_status = BFA_STATUS_OK;
+	}
+}
+
+static void
+bfa_port_stats_timeout(void *cbarg)
+{
+	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+
+	bfa_trc(port->bfa, port->stats_qfull);
+
+	if (port->stats_qfull) {
+		bfa_reqq_wcancel(&port->stats_reqq_wait);
+		port->stats_qfull = BFA_FALSE;
+	}
+
+	port->stats_status = BFA_STATUS_ETIMER;
+	bfa_cb_queue(port->bfa, &port->hcb_qe, __bfa_cb_port_stats, port);
+}
+
+#define BFA_PORT_STATS_TOV	1000
+
+/**
+ * Fetch port attributes.
+ */
+bfa_status_t
+bfa_pport_get_stats(struct bfa_s *bfa, union bfa_pport_stats_u *stats,
+		    bfa_cb_pport_t cbfn, void *cbarg)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	if (port->stats_busy) {
+		bfa_trc(bfa, port->stats_busy);
+		return (BFA_STATUS_DEVBUSY);
+	}
+
+	port->stats_busy = BFA_TRUE;
+	port->stats_ret = stats;
+	port->stats_cbfn = cbfn;
+	port->stats_cbarg = cbarg;
+
+	bfa_port_stats_query(port);
+
+	bfa_timer_start(bfa, &port->timer, bfa_port_stats_timeout, port,
+			BFA_PORT_STATS_TOV);
+	return (BFA_STATUS_OK);
+}
+
+bfa_status_t
+bfa_pport_clear_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn, void *cbarg)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	if (port->stats_busy) {
+		bfa_trc(bfa, port->stats_busy);
+		return (BFA_STATUS_DEVBUSY);
+	}
+
+	port->stats_busy = BFA_TRUE;
+	port->stats_cbfn = cbfn;
+	port->stats_cbarg = cbarg;
+
+	bfa_port_stats_clear(port);
+
+	bfa_timer_start(bfa, &port->timer, bfa_port_stats_clr_timeout, port,
+			BFA_PORT_STATS_TOV);
+	return (BFA_STATUS_OK);
+}
+
+bfa_status_t
+bfa_pport_trunk_enable(struct bfa_s *bfa, u8 bitmap)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, bitmap);
+	bfa_trc(bfa, pport->cfg.trunked);
+	bfa_trc(bfa, pport->cfg.trunk_ports);
+
+	if (!bitmap || (bitmap & (bitmap - 1)))
+		return BFA_STATUS_EINVAL;
+
+	pport->cfg.trunked = BFA_TRUE;
+	pport->cfg.trunk_ports = bitmap;
+
+	return BFA_STATUS_OK;
+}
+
+void
+bfa_pport_qos_get_attr(struct bfa_s *bfa, struct bfa_qos_attr_s *qos_attr)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	qos_attr->state = bfa_os_ntohl(pport->qos_attr.state);
+	qos_attr->total_bb_cr = bfa_os_ntohl(pport->qos_attr.total_bb_cr);
+}
+
+void
+bfa_pport_qos_get_vc_attr(struct bfa_s *bfa,
+			  struct bfa_qos_vc_attr_s *qos_vc_attr)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_qos_vc_attr_s *bfa_vc_attr = &pport->qos_vc_attr;
+	u32        i = 0;
+
+	qos_vc_attr->total_vc_count = bfa_os_ntohs(bfa_vc_attr->total_vc_count);
+	qos_vc_attr->shared_credit = bfa_os_ntohs(bfa_vc_attr->shared_credit);
+	qos_vc_attr->elp_opmode_flags =
+		bfa_os_ntohl(bfa_vc_attr->elp_opmode_flags);
+
+	/*
+	 * Individual VC info
+	 */
+	while (i < qos_vc_attr->total_vc_count) {
+		qos_vc_attr->vc_info[i].vc_credit =
+			bfa_vc_attr->vc_info[i].vc_credit;
+		qos_vc_attr->vc_info[i].borrow_credit =
+			bfa_vc_attr->vc_info[i].borrow_credit;
+		qos_vc_attr->vc_info[i].priority =
+			bfa_vc_attr->vc_info[i].priority;
+		++i;
+	}
+}
+
+/**
+ * Fetch QoS Stats.
+ */
+bfa_status_t
+bfa_pport_get_qos_stats(struct bfa_s *bfa, union bfa_pport_stats_u *stats,
+			bfa_cb_pport_t cbfn, void *cbarg)
+{
+	/*
+	 * QoS stats is embedded in port stats
+	 */
+	return (bfa_pport_get_stats(bfa, stats, cbfn, cbarg));
+}
+
+bfa_status_t
+bfa_pport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn, void *cbarg)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	if (port->stats_busy) {
+		bfa_trc(bfa, port->stats_busy);
+		return (BFA_STATUS_DEVBUSY);
+	}
+
+	port->stats_busy = BFA_TRUE;
+	port->stats_cbfn = cbfn;
+	port->stats_cbarg = cbarg;
+
+	bfa_port_qos_stats_clear(port);
+
+	bfa_timer_start(bfa, &port->timer, bfa_port_stats_clr_timeout, port,
+			BFA_PORT_STATS_TOV);
+	return (BFA_STATUS_OK);
+}
+
+/**
+ * Fetch port attributes.
+ */
+bfa_status_t
+bfa_pport_trunk_disable(struct bfa_s *bfa)
+{
+	return (BFA_STATUS_OK);
+}
+
+bfa_boolean_t
+bfa_pport_trunk_query(struct bfa_s *bfa, u32 *bitmap)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	*bitmap = port->cfg.trunk_ports;
+	return port->cfg.trunked;
+}
+
+bfa_boolean_t
+bfa_pport_is_disabled(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+	return (bfa_sm_to_state(hal_pport_sm_table, port->sm) ==
+		BFA_PPORT_ST_DISABLED);
+
+}
+
+bfa_boolean_t
+bfa_pport_is_ratelim(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+return (pport->cfg.ratelimit ? BFA_TRUE : BFA_FALSE);
+
+}
+
+void
+bfa_pport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, on_off);
+	bfa_trc(bfa, pport->cfg.qos_enabled);
+
+	pport->cfg.qos_enabled = on_off;
+}
+
+void
+bfa_pport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, on_off);
+	bfa_trc(bfa, pport->cfg.ratelimit);
+
+	pport->cfg.ratelimit = on_off;
+	if (pport->cfg.trl_def_speed == BFA_PPORT_SPEED_UNKNOWN)
+		pport->cfg.trl_def_speed = BFA_PPORT_SPEED_1GBPS;
+}
+
+/**
+ * Configure default minimum ratelim speed
+ */
+bfa_status_t
+bfa_pport_cfg_ratelim_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, speed);
+
+	/*
+	 * Auto and speeds greater than the supported speed, are invalid
+	 */
+	if ((speed == BFA_PPORT_SPEED_AUTO) || (speed > pport->speed_sup)) {
+		bfa_trc(bfa, pport->speed_sup);
+		return BFA_STATUS_UNSUPP_SPEED;
+	}
+
+	pport->cfg.trl_def_speed = speed;
+
+	return (BFA_STATUS_OK);
+}
+
+/**
+ * Get default minimum ratelim speed
+ */
+enum bfa_pport_speed
+bfa_pport_get_ratelim_speed(struct bfa_s *bfa)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, pport->cfg.trl_def_speed);
+	return (pport->cfg.trl_def_speed);
+
+}
+
+void
+bfa_pport_busy(struct bfa_s *bfa, bfa_boolean_t status)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, status);
+	bfa_trc(bfa, pport->diag_busy);
+
+	pport->diag_busy = status;
+}
+
+void
+bfa_pport_beacon(struct bfa_s *bfa, bfa_boolean_t beacon,
+		 bfa_boolean_t link_e2e_beacon)
+{
+	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+	bfa_trc(bfa, beacon);
+	bfa_trc(bfa, link_e2e_beacon);
+	bfa_trc(bfa, pport->beacon);
+	bfa_trc(bfa, pport->link_e2e_beacon);
+
+	pport->beacon = beacon;
+	pport->link_e2e_beacon = link_e2e_beacon;
+}
+
+bfa_boolean_t
+bfa_pport_is_linkup(struct bfa_s *bfa)
+{
+	return bfa_sm_cmp_state(BFA_PORT_MOD(bfa), bfa_pport_sm_linkup);
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
new file mode 100644
index 000000000000..7cb39a306ea9
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -0,0 +1,182 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs.c BFA FCS main
+ */
+
+#include <fcs/bfa_fcs.h>
+#include "fcs_port.h"
+#include "fcs_uf.h"
+#include "fcs_vport.h"
+#include "fcs_rport.h"
+#include "fcs_fabric.h"
+#include "fcs_fcpim.h"
+#include "fcs_fcptm.h"
+#include "fcbuild.h"
+#include "fcs.h"
+#include "bfad_drv.h"
+#include <fcb/bfa_fcb.h>
+
+/**
+ * FCS sub-modules
+ */
+struct bfa_fcs_mod_s {
+	void            (*modinit) (struct bfa_fcs_s *fcs);
+	void            (*modexit) (struct bfa_fcs_s *fcs);
+};
+
+#define BFA_FCS_MODULE(_mod) { _mod ## _modinit, _mod ## _modexit }
+
+static struct bfa_fcs_mod_s fcs_modules[] = {
+	BFA_FCS_MODULE(bfa_fcs_pport),
+	BFA_FCS_MODULE(bfa_fcs_uf),
+	BFA_FCS_MODULE(bfa_fcs_fabric),
+	BFA_FCS_MODULE(bfa_fcs_vport),
+	BFA_FCS_MODULE(bfa_fcs_rport),
+	BFA_FCS_MODULE(bfa_fcs_fcpim),
+};
+
+/**
+ *  fcs_api BFA FCS API
+ */
+
+static void
+bfa_fcs_exit_comp(void *fcs_cbarg)
+{
+	struct bfa_fcs_s *fcs = fcs_cbarg;
+	struct bfad_s *bfad = fcs->bfad;
+
+	complete(&bfad->comp);
+}
+
+
+
+/**
+ *  fcs_api BFA FCS API
+ */
+
+/**
+ * 		FCS instance initialization.
+ *
+ * 	param[in]		fcs		FCS instance
+ * 	param[in]		bfa		BFA instance
+ * 	param[in]		bfad		BFA driver instance
+ *
+ * 	return None
+ */
+void
+bfa_fcs_init(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
+			bfa_boolean_t min_cfg)
+{
+	int             i;
+	struct bfa_fcs_mod_s  *mod;
+
+	fcs->bfa = bfa;
+	fcs->bfad = bfad;
+	fcs->min_cfg = min_cfg;
+
+	bfa_attach_fcs(bfa);
+	fcbuild_init();
+
+	for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) {
+		mod = &fcs_modules[i];
+		mod->modinit(fcs);
+	}
+}
+
+/**
+ * Start FCS operations.
+ */
+void
+bfa_fcs_start(struct bfa_fcs_s *fcs)
+{
+	bfa_fcs_fabric_modstart(fcs);
+}
+
+/**
+ * 		FCS driver details initialization.
+ *
+ * 	param[in]		fcs		FCS instance
+ * 	param[in]		driver_info	Driver Details
+ *
+ * 	return None
+ */
+void
+bfa_fcs_driver_info_init(struct bfa_fcs_s *fcs,
+			struct bfa_fcs_driver_info_s *driver_info)
+{
+
+	fcs->driver_info = *driver_info;
+
+	bfa_fcs_fabric_psymb_init(&fcs->fabric);
+}
+
+/**
+ * 		FCS instance cleanup and exit.
+ *
+ * 	param[in]		fcs			FCS instance
+ * 	return None
+ */
+void
+bfa_fcs_exit(struct bfa_fcs_s *fcs)
+{
+	struct bfa_fcs_mod_s  *mod;
+	int             nmods, i;
+
+	bfa_wc_init(&fcs->wc, bfa_fcs_exit_comp, fcs);
+
+	nmods = sizeof(fcs_modules) / sizeof(fcs_modules[0]);
+
+	for (i = 0; i < nmods; i++) {
+		bfa_wc_up(&fcs->wc);
+
+		mod = &fcs_modules[i];
+		mod->modexit(fcs);
+	}
+
+	bfa_wc_wait(&fcs->wc);
+}
+
+
+void
+bfa_fcs_trc_init(struct bfa_fcs_s *fcs, struct bfa_trc_mod_s *trcmod)
+{
+	fcs->trcmod = trcmod;
+}
+
+
+void
+bfa_fcs_log_init(struct bfa_fcs_s *fcs, struct bfa_log_mod_s *logmod)
+{
+	fcs->logm = logmod;
+}
+
+
+void
+bfa_fcs_aen_init(struct bfa_fcs_s *fcs, struct bfa_aen_s *aen)
+{
+	fcs->aen = aen;
+}
+
+void
+bfa_fcs_modexit_comp(struct bfa_fcs_s *fcs)
+{
+	bfa_wc_down(&fcs->wc);
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
new file mode 100644
index 000000000000..8975ed041dc0
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -0,0 +1,940 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs_port.c BFA FCS port
+ */
+
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+#include <fcb/bfa_fcb_port.h>
+#include <bfa_svc.h>
+#include <log/bfa_log_fcs.h>
+#include "fcs.h"
+#include "fcs_lport.h"
+#include "fcs_vport.h"
+#include "fcs_rport.h"
+#include "fcs_fcxp.h"
+#include "fcs_trcmod.h"
+#include "lport_priv.h"
+#include <aen/bfa_aen_lport.h>
+
+BFA_TRC_FILE(FCS, PORT);
+
+/**
+ * Forward declarations
+ */
+
+static void     bfa_fcs_port_aen_post(struct bfa_fcs_port_s *port,
+				      enum bfa_lport_aen_event event);
+static void     bfa_fcs_port_send_ls_rjt(struct bfa_fcs_port_s *port,
+			struct fchs_s *rx_fchs, u8 reason_code,
+			u8 reason_code_expl);
+static void     bfa_fcs_port_plogi(struct bfa_fcs_port_s *port,
+			struct fchs_s *rx_fchs,
+			struct fc_logi_s *plogi);
+static void     bfa_fcs_port_online_actions(struct bfa_fcs_port_s *port);
+static void     bfa_fcs_port_offline_actions(struct bfa_fcs_port_s *port);
+static void     bfa_fcs_port_unknown_init(struct bfa_fcs_port_s *port);
+static void     bfa_fcs_port_unknown_online(struct bfa_fcs_port_s *port);
+static void     bfa_fcs_port_unknown_offline(struct bfa_fcs_port_s *port);
+static void     bfa_fcs_port_deleted(struct bfa_fcs_port_s *port);
+static void     bfa_fcs_port_echo(struct bfa_fcs_port_s *port,
+			struct fchs_s *rx_fchs,
+			struct fc_echo_s *echo, u16 len);
+static void     bfa_fcs_port_rnid(struct bfa_fcs_port_s *port,
+			struct fchs_s *rx_fchs,
+			struct fc_rnid_cmd_s *rnid, u16 len);
+static void     bfa_fs_port_get_gen_topo_data(struct bfa_fcs_port_s *port,
+			struct fc_rnid_general_topology_data_s *gen_topo_data);
+
+static struct {
+	void            (*init) (struct bfa_fcs_port_s *port);
+	void            (*online) (struct bfa_fcs_port_s *port);
+	void            (*offline) (struct bfa_fcs_port_s *port);
+} __port_action[] = {
+	{
+	bfa_fcs_port_unknown_init, bfa_fcs_port_unknown_online,
+			bfa_fcs_port_unknown_offline}, {
+	bfa_fcs_port_fab_init, bfa_fcs_port_fab_online,
+			bfa_fcs_port_fab_offline}, {
+	bfa_fcs_port_loop_init, bfa_fcs_port_loop_online,
+			bfa_fcs_port_loop_offline}, {
+bfa_fcs_port_n2n_init, bfa_fcs_port_n2n_online,
+			bfa_fcs_port_n2n_offline},};
+
+/**
+ *  fcs_port_sm FCS logical port state machine
+ */
+
+enum bfa_fcs_port_event {
+	BFA_FCS_PORT_SM_CREATE = 1,
+	BFA_FCS_PORT_SM_ONLINE = 2,
+	BFA_FCS_PORT_SM_OFFLINE = 3,
+	BFA_FCS_PORT_SM_DELETE = 4,
+	BFA_FCS_PORT_SM_DELRPORT = 5,
+};
+
+static void     bfa_fcs_port_sm_uninit(struct bfa_fcs_port_s *port,
+				       enum bfa_fcs_port_event event);
+static void     bfa_fcs_port_sm_init(struct bfa_fcs_port_s *port,
+				     enum bfa_fcs_port_event event);
+static void     bfa_fcs_port_sm_online(struct bfa_fcs_port_s *port,
+				       enum bfa_fcs_port_event event);
+static void     bfa_fcs_port_sm_offline(struct bfa_fcs_port_s *port,
+					enum bfa_fcs_port_event event);
+static void     bfa_fcs_port_sm_deleting(struct bfa_fcs_port_s *port,
+					 enum bfa_fcs_port_event event);
+
+static void
+bfa_fcs_port_sm_uninit(struct bfa_fcs_port_s *port,
+			enum bfa_fcs_port_event event)
+{
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_PORT_SM_CREATE:
+		bfa_sm_set_state(port, bfa_fcs_port_sm_init);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_sm_init(struct bfa_fcs_port_s *port, enum bfa_fcs_port_event event)
+{
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_PORT_SM_ONLINE:
+		bfa_sm_set_state(port, bfa_fcs_port_sm_online);
+		bfa_fcs_port_online_actions(port);
+		break;
+
+	case BFA_FCS_PORT_SM_DELETE:
+		bfa_sm_set_state(port, bfa_fcs_port_sm_uninit);
+		bfa_fcs_port_deleted(port);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_sm_online(struct bfa_fcs_port_s *port,
+			enum bfa_fcs_port_event event)
+{
+	struct bfa_fcs_rport_s *rport;
+	struct list_head *qe, *qen;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_PORT_SM_OFFLINE:
+		bfa_sm_set_state(port, bfa_fcs_port_sm_offline);
+		bfa_fcs_port_offline_actions(port);
+		break;
+
+	case BFA_FCS_PORT_SM_DELETE:
+
+		__port_action[port->fabric->fab_type].offline(port);
+
+		if (port->num_rports == 0) {
+			bfa_sm_set_state(port, bfa_fcs_port_sm_uninit);
+			bfa_fcs_port_deleted(port);
+		} else {
+			bfa_sm_set_state(port, bfa_fcs_port_sm_deleting);
+			list_for_each_safe(qe, qen, &port->rport_q) {
+				rport = (struct bfa_fcs_rport_s *)qe;
+				bfa_fcs_rport_delete(rport);
+			}
+		}
+		break;
+
+	case BFA_FCS_PORT_SM_DELRPORT:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_sm_offline(struct bfa_fcs_port_s *port,
+			enum bfa_fcs_port_event event)
+{
+	struct bfa_fcs_rport_s *rport;
+	struct list_head *qe, *qen;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_PORT_SM_ONLINE:
+		bfa_sm_set_state(port, bfa_fcs_port_sm_online);
+		bfa_fcs_port_online_actions(port);
+		break;
+
+	case BFA_FCS_PORT_SM_DELETE:
+		if (port->num_rports == 0) {
+			bfa_sm_set_state(port, bfa_fcs_port_sm_uninit);
+			bfa_fcs_port_deleted(port);
+		} else {
+			bfa_sm_set_state(port, bfa_fcs_port_sm_deleting);
+			list_for_each_safe(qe, qen, &port->rport_q) {
+				rport = (struct bfa_fcs_rport_s *)qe;
+				bfa_fcs_rport_delete(rport);
+			}
+		}
+		break;
+
+	case BFA_FCS_PORT_SM_DELRPORT:
+	case BFA_FCS_PORT_SM_OFFLINE:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_sm_deleting(struct bfa_fcs_port_s *port,
+			 enum bfa_fcs_port_event event)
+{
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_PORT_SM_DELRPORT:
+		if (port->num_rports == 0) {
+			bfa_sm_set_state(port, bfa_fcs_port_sm_uninit);
+			bfa_fcs_port_deleted(port);
+		}
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  fcs_port_pvt
+ */
+
+/**
+ * Send AEN notification
+ */
+static void
+bfa_fcs_port_aen_post(struct bfa_fcs_port_s *port,
+		      enum bfa_lport_aen_event event)
+{
+	union bfa_aen_data_u aen_data;
+	struct bfa_log_mod_s *logmod = port->fcs->logm;
+	enum bfa_port_role role = port->port_cfg.roles;
+	wwn_t           lpwwn = bfa_fcs_port_get_pwwn(port);
+	char            lpwwn_ptr[BFA_STRING_32];
+	char           *role_str[BFA_PORT_ROLE_FCP_MAX / 2 + 1] =
+		{ "Initiator", "Target", "IPFC" };
+
+	wwn2str(lpwwn_ptr, lpwwn);
+
+	bfa_assert(role <= BFA_PORT_ROLE_FCP_MAX);
+
+	switch (event) {
+	case BFA_LPORT_AEN_ONLINE:
+		bfa_log(logmod, BFA_AEN_LPORT_ONLINE, lpwwn_ptr,
+			role_str[role / 2]);
+		break;
+	case BFA_LPORT_AEN_OFFLINE:
+		bfa_log(logmod, BFA_AEN_LPORT_OFFLINE, lpwwn_ptr,
+			role_str[role / 2]);
+		break;
+	case BFA_LPORT_AEN_NEW:
+		bfa_log(logmod, BFA_AEN_LPORT_NEW, lpwwn_ptr,
+			role_str[role / 2]);
+		break;
+	case BFA_LPORT_AEN_DELETE:
+		bfa_log(logmod, BFA_AEN_LPORT_DELETE, lpwwn_ptr,
+			role_str[role / 2]);
+		break;
+	case BFA_LPORT_AEN_DISCONNECT:
+		bfa_log(logmod, BFA_AEN_LPORT_DISCONNECT, lpwwn_ptr,
+			role_str[role / 2]);
+		break;
+	default:
+		break;
+	}
+
+	aen_data.lport.vf_id = port->fabric->vf_id;
+	aen_data.lport.roles = role;
+	aen_data.lport.ppwwn =
+		bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(port->fcs));
+	aen_data.lport.lpwwn = lpwwn;
+}
+
+/*
+ * Send a LS reject
+ */
+static void
+bfa_fcs_port_send_ls_rjt(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+			 u8 reason_code, u8 reason_code_expl)
+{
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	struct bfa_rport_s *bfa_rport = NULL;
+	int             len;
+
+	bfa_trc(port->fcs, rx_fchs->s_id);
+
+	fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp)
+		return;
+
+	len = fc_ls_rjt_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+			      bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+			      reason_code, reason_code_expl);
+
+	bfa_fcxp_send(fcxp, bfa_rport, port->fabric->vf_id, port->lp_tag,
+		      BFA_FALSE, FC_CLASS_3, len, &fchs, NULL, NULL,
+		      FC_MAX_PDUSZ, 0);
+}
+
+/**
+ * Process incoming plogi from a remote port.
+ */
+static void
+bfa_fcs_port_plogi(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+			struct fc_logi_s *plogi)
+{
+	struct bfa_fcs_rport_s *rport;
+
+	bfa_trc(port->fcs, rx_fchs->d_id);
+	bfa_trc(port->fcs, rx_fchs->s_id);
+
+	/*
+	 * If min cfg mode is enabled, drop any incoming PLOGIs
+	 */
+	if (__fcs_min_cfg(port->fcs)) {
+		bfa_trc(port->fcs, rx_fchs->s_id);
+		return;
+	}
+
+	if (fc_plogi_parse(rx_fchs) != FC_PARSE_OK) {
+		bfa_trc(port->fcs, rx_fchs->s_id);
+		/*
+		 * send a LS reject
+		 */
+		bfa_fcs_port_send_ls_rjt(port, rx_fchs,
+					 FC_LS_RJT_RSN_PROTOCOL_ERROR,
+					 FC_LS_RJT_EXP_SPARMS_ERR_OPTIONS);
+		return;
+	}
+
+	/**
+* Direct Attach P2P mode : verify address assigned by the r-port.
+	 */
+	if ((!bfa_fcs_fabric_is_switched(port->fabric))
+	    &&
+	    (memcmp
+	     ((void *)&bfa_fcs_port_get_pwwn(port), (void *)&plogi->port_name,
+	      sizeof(wwn_t)) < 0)) {
+		if (BFA_FCS_PID_IS_WKA(rx_fchs->d_id)) {
+			/*
+			 * Address assigned to us cannot be a WKA
+			 */
+			bfa_fcs_port_send_ls_rjt(port, rx_fchs,
+					FC_LS_RJT_RSN_PROTOCOL_ERROR,
+					FC_LS_RJT_EXP_INVALID_NPORT_ID);
+			return;
+		}
+		port->pid = rx_fchs->d_id;
+	}
+
+	/**
+	 * First, check if we know the device by pwwn.
+	 */
+	rport = bfa_fcs_port_get_rport_by_pwwn(port, plogi->port_name);
+	if (rport) {
+		/**
+		 * Direct Attach P2P mode: handle address assigned by the rport.
+		 */
+		if ((!bfa_fcs_fabric_is_switched(port->fabric))
+		    &&
+		    (memcmp
+		     ((void *)&bfa_fcs_port_get_pwwn(port),
+		      (void *)&plogi->port_name, sizeof(wwn_t)) < 0)) {
+			port->pid = rx_fchs->d_id;
+			rport->pid = rx_fchs->s_id;
+		}
+		bfa_fcs_rport_plogi(rport, rx_fchs, plogi);
+		return;
+	}
+
+	/**
+	 * Next, lookup rport by PID.
+	 */
+	rport = bfa_fcs_port_get_rport_by_pid(port, rx_fchs->s_id);
+	if (!rport) {
+		/**
+		 * Inbound PLOGI from a new device.
+		 */
+		bfa_fcs_rport_plogi_create(port, rx_fchs, plogi);
+		return;
+	}
+
+	/**
+	 * Rport is known only by PID.
+	 */
+	if (rport->pwwn) {
+		/**
+		 * This is a different device with the same pid. Old device
+		 * disappeared. Send implicit LOGO to old device.
+		 */
+		bfa_assert(rport->pwwn != plogi->port_name);
+		bfa_fcs_rport_logo_imp(rport);
+
+		/**
+		 * Inbound PLOGI from a new device (with old PID).
+		 */
+		bfa_fcs_rport_plogi_create(port, rx_fchs, plogi);
+		return;
+	}
+
+	/**
+	 * PLOGI crossing each other.
+	 */
+	bfa_assert(rport->pwwn == WWN_NULL);
+	bfa_fcs_rport_plogi(rport, rx_fchs, plogi);
+}
+
+/*
+ * Process incoming ECHO.
+ * Since it does not require a login, it is processed here.
+ */
+static void
+bfa_fcs_port_echo(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+			struct fc_echo_s *echo, u16 rx_len)
+{
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	struct bfa_rport_s *bfa_rport = NULL;
+	int             len, pyld_len;
+
+	bfa_trc(port->fcs, rx_fchs->s_id);
+	bfa_trc(port->fcs, rx_fchs->d_id);
+	bfa_trc(port->fcs, rx_len);
+
+	fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp)
+		return;
+
+	len = fc_ls_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+			      bfa_fcs_port_get_fcid(port), rx_fchs->ox_id);
+
+	/*
+	 * Copy the payload (if any) from the echo frame
+	 */
+	pyld_len = rx_len - sizeof(struct fchs_s);
+	bfa_trc(port->fcs, pyld_len);
+
+	if (pyld_len > len)
+		memcpy(((u8 *) bfa_fcxp_get_reqbuf(fcxp)) +
+		       sizeof(struct fc_echo_s), (echo + 1),
+		       (pyld_len - sizeof(struct fc_echo_s)));
+
+	bfa_fcxp_send(fcxp, bfa_rport, port->fabric->vf_id, port->lp_tag,
+		      BFA_FALSE, FC_CLASS_3, pyld_len, &fchs, NULL, NULL,
+		      FC_MAX_PDUSZ, 0);
+}
+
+/*
+ * Process incoming RNID.
+ * Since it does not require a login, it is processed here.
+ */
+static void
+bfa_fcs_port_rnid(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+			struct fc_rnid_cmd_s *rnid, u16 rx_len)
+{
+	struct fc_rnid_common_id_data_s common_id_data;
+	struct fc_rnid_general_topology_data_s gen_topo_data;
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	struct bfa_rport_s *bfa_rport = NULL;
+	u16        len;
+	u32        data_format;
+
+	bfa_trc(port->fcs, rx_fchs->s_id);
+	bfa_trc(port->fcs, rx_fchs->d_id);
+	bfa_trc(port->fcs, rx_len);
+
+	fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp)
+		return;
+
+	/*
+	 * Check Node Indentification Data Format
+	 * We only support General Topology Discovery Format.
+	 * For any other requested Data Formats, we return Common Node Id Data
+	 * only, as per FC-LS.
+	 */
+	bfa_trc(port->fcs, rnid->node_id_data_format);
+	if (rnid->node_id_data_format == RNID_NODEID_DATA_FORMAT_DISCOVERY) {
+		data_format = RNID_NODEID_DATA_FORMAT_DISCOVERY;
+		/*
+		 * Get General topology data for this port
+		 */
+		bfa_fs_port_get_gen_topo_data(port, &gen_topo_data);
+	} else {
+		data_format = RNID_NODEID_DATA_FORMAT_COMMON;
+	}
+
+	/*
+	 * Copy the Node Id Info
+	 */
+	common_id_data.port_name = bfa_fcs_port_get_pwwn(port);
+	common_id_data.node_name = bfa_fcs_port_get_nwwn(port);
+
+	len = fc_rnid_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+				bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+				data_format, &common_id_data, &gen_topo_data);
+
+	bfa_fcxp_send(fcxp, bfa_rport, port->fabric->vf_id, port->lp_tag,
+		      BFA_FALSE, FC_CLASS_3, len, &fchs, NULL, NULL,
+		      FC_MAX_PDUSZ, 0);
+
+	return;
+}
+
+/*
+ *  Fill out General Topolpgy Discovery Data for RNID ELS.
+ */
+static void
+bfa_fs_port_get_gen_topo_data(struct bfa_fcs_port_s *port,
+			struct fc_rnid_general_topology_data_s *gen_topo_data)
+{
+
+	bfa_os_memset(gen_topo_data, 0,
+		      sizeof(struct fc_rnid_general_topology_data_s));
+
+	gen_topo_data->asso_type = bfa_os_htonl(RNID_ASSOCIATED_TYPE_HOST);
+	gen_topo_data->phy_port_num = 0;	/* @todo */
+	gen_topo_data->num_attached_nodes = bfa_os_htonl(1);
+}
+
+static void
+bfa_fcs_port_online_actions(struct bfa_fcs_port_s *port)
+{
+	bfa_trc(port->fcs, port->fabric->oper_type);
+
+	__port_action[port->fabric->fab_type].init(port);
+	__port_action[port->fabric->fab_type].online(port);
+
+	bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_ONLINE);
+	bfa_fcb_port_online(port->fcs->bfad, port->port_cfg.roles,
+			port->fabric->vf_drv, (port->vport == NULL) ?
+			NULL : port->vport->vport_drv);
+}
+
+static void
+bfa_fcs_port_offline_actions(struct bfa_fcs_port_s *port)
+{
+	struct list_head *qe, *qen;
+	struct bfa_fcs_rport_s *rport;
+
+	bfa_trc(port->fcs, port->fabric->oper_type);
+
+	__port_action[port->fabric->fab_type].offline(port);
+
+	if (bfa_fcs_fabric_is_online(port->fabric) == BFA_TRUE) {
+		bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_DISCONNECT);
+	} else {
+		bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_OFFLINE);
+	}
+	bfa_fcb_port_offline(port->fcs->bfad, port->port_cfg.roles,
+			port->fabric->vf_drv,
+			(port->vport == NULL) ? NULL : port->vport->vport_drv);
+
+	list_for_each_safe(qe, qen, &port->rport_q) {
+		rport = (struct bfa_fcs_rport_s *)qe;
+		bfa_fcs_rport_offline(rport);
+	}
+}
+
+static void
+bfa_fcs_port_unknown_init(struct bfa_fcs_port_s *port)
+{
+	bfa_assert(0);
+}
+
+static void
+bfa_fcs_port_unknown_online(struct bfa_fcs_port_s *port)
+{
+	bfa_assert(0);
+}
+
+static void
+bfa_fcs_port_unknown_offline(struct bfa_fcs_port_s *port)
+{
+	bfa_assert(0);
+}
+
+static void
+bfa_fcs_port_deleted(struct bfa_fcs_port_s *port)
+{
+	bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_DELETE);
+
+	/*
+	 * Base port will be deleted by the OS driver
+	 */
+	if (port->vport) {
+		bfa_fcb_port_delete(port->fcs->bfad, port->port_cfg.roles,
+			port->fabric->vf_drv,
+			port->vport ? port->vport->vport_drv : NULL);
+		bfa_fcs_vport_delete_comp(port->vport);
+	} else {
+		bfa_fcs_fabric_port_delete_comp(port->fabric);
+	}
+}
+
+
+
+/**
+ *  fcs_lport_api BFA FCS port API
+ */
+/**
+ *   Module initialization
+ */
+void
+bfa_fcs_port_modinit(struct bfa_fcs_s *fcs)
+{
+
+}
+
+/**
+ *   Module cleanup
+ */
+void
+bfa_fcs_port_modexit(struct bfa_fcs_s *fcs)
+{
+	bfa_fcs_modexit_comp(fcs);
+}
+
+/**
+ * 		Unsolicited frame receive handling.
+ */
+void
+bfa_fcs_port_uf_recv(struct bfa_fcs_port_s *lport, struct fchs_s *fchs,
+			u16 len)
+{
+	u32        pid = fchs->s_id;
+	struct bfa_fcs_rport_s *rport = NULL;
+	struct fc_els_cmd_s   *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+	bfa_stats(lport, uf_recvs);
+
+	if (!bfa_fcs_port_is_online(lport)) {
+		bfa_stats(lport, uf_recv_drops);
+		return;
+	}
+
+	/**
+	 * First, handle ELSs that donot require a login.
+	 */
+	/*
+	 * Handle PLOGI first
+	 */
+	if ((fchs->type == FC_TYPE_ELS) &&
+		(els_cmd->els_code == FC_ELS_PLOGI)) {
+		bfa_fcs_port_plogi(lport, fchs, (struct fc_logi_s *) els_cmd);
+		return;
+	}
+
+	/*
+	 * Handle ECHO separately.
+	 */
+	if ((fchs->type == FC_TYPE_ELS) && (els_cmd->els_code == FC_ELS_ECHO)) {
+		bfa_fcs_port_echo(lport, fchs,
+			(struct fc_echo_s *) els_cmd, len);
+		return;
+	}
+
+	/*
+	 * Handle RNID separately.
+	 */
+	if ((fchs->type == FC_TYPE_ELS) && (els_cmd->els_code == FC_ELS_RNID)) {
+		bfa_fcs_port_rnid(lport, fchs,
+			(struct fc_rnid_cmd_s *) els_cmd, len);
+		return;
+	}
+
+	/**
+	 * look for a matching remote port ID
+	 */
+	rport = bfa_fcs_port_get_rport_by_pid(lport, pid);
+	if (rport) {
+		bfa_trc(rport->fcs, fchs->s_id);
+		bfa_trc(rport->fcs, fchs->d_id);
+		bfa_trc(rport->fcs, fchs->type);
+
+		bfa_fcs_rport_uf_recv(rport, fchs, len);
+		return;
+	}
+
+	/**
+	 * Only handles ELS frames for now.
+	 */
+	if (fchs->type != FC_TYPE_ELS) {
+		bfa_trc(lport->fcs, fchs->type);
+		bfa_assert(0);
+		return;
+	}
+
+	bfa_trc(lport->fcs, els_cmd->els_code);
+	if (els_cmd->els_code == FC_ELS_RSCN) {
+		bfa_fcs_port_scn_process_rscn(lport, fchs, len);
+		return;
+	}
+
+	if (els_cmd->els_code == FC_ELS_LOGO) {
+		/**
+		 * @todo Handle LOGO frames received.
+		 */
+		bfa_trc(lport->fcs, els_cmd->els_code);
+		return;
+	}
+
+	if (els_cmd->els_code == FC_ELS_PRLI) {
+		/**
+		 * @todo Handle PRLI frames received.
+		 */
+		bfa_trc(lport->fcs, els_cmd->els_code);
+		return;
+	}
+
+	/**
+	 * Unhandled ELS frames. Send a LS_RJT.
+	 */
+	bfa_fcs_port_send_ls_rjt(lport, fchs, FC_LS_RJT_RSN_CMD_NOT_SUPP,
+				 FC_LS_RJT_EXP_NO_ADDL_INFO);
+
+}
+
+/**
+ *   PID based Lookup for a R-Port in the Port R-Port Queue
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_port_get_rport_by_pid(struct bfa_fcs_port_s *port, u32 pid)
+{
+	struct bfa_fcs_rport_s *rport;
+	struct list_head *qe;
+
+	list_for_each(qe, &port->rport_q) {
+		rport = (struct bfa_fcs_rport_s *)qe;
+		if (rport->pid == pid)
+			return rport;
+	}
+
+	bfa_trc(port->fcs, pid);
+	return NULL;
+}
+
+/**
+ *   PWWN based Lookup for a R-Port in the Port R-Port Queue
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_port_get_rport_by_pwwn(struct bfa_fcs_port_s *port, wwn_t pwwn)
+{
+	struct bfa_fcs_rport_s *rport;
+	struct list_head *qe;
+
+	list_for_each(qe, &port->rport_q) {
+		rport = (struct bfa_fcs_rport_s *)qe;
+		if (wwn_is_equal(rport->pwwn, pwwn))
+			return rport;
+	}
+
+	bfa_trc(port->fcs, pwwn);
+	return (NULL);
+}
+
+/**
+ *   NWWN based Lookup for a R-Port in the Port R-Port Queue
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_port_get_rport_by_nwwn(struct bfa_fcs_port_s *port, wwn_t nwwn)
+{
+	struct bfa_fcs_rport_s *rport;
+	struct list_head *qe;
+
+	list_for_each(qe, &port->rport_q) {
+		rport = (struct bfa_fcs_rport_s *)qe;
+		if (wwn_is_equal(rport->nwwn, nwwn))
+			return rport;
+	}
+
+	bfa_trc(port->fcs, nwwn);
+	return (NULL);
+}
+
+/**
+ * Called by rport module when new rports are discovered.
+ */
+void
+bfa_fcs_port_add_rport(struct bfa_fcs_port_s *port,
+		       struct bfa_fcs_rport_s *rport)
+{
+	list_add_tail(&rport->qe, &port->rport_q);
+	port->num_rports++;
+}
+
+/**
+ * Called by rport module to when rports are deleted.
+ */
+void
+bfa_fcs_port_del_rport(struct bfa_fcs_port_s *port,
+		       struct bfa_fcs_rport_s *rport)
+{
+	bfa_assert(bfa_q_is_on_q(&port->rport_q, rport));
+	list_del(&rport->qe);
+	port->num_rports--;
+
+	bfa_sm_send_event(port, BFA_FCS_PORT_SM_DELRPORT);
+}
+
+/**
+ * Called by fabric for base port when fabric login is complete.
+ * Called by vport for virtual ports when FDISC is complete.
+ */
+void
+bfa_fcs_port_online(struct bfa_fcs_port_s *port)
+{
+	bfa_sm_send_event(port, BFA_FCS_PORT_SM_ONLINE);
+}
+
+/**
+ * Called by fabric for base port when fabric goes offline.
+ * Called by vport for virtual ports when virtual port becomes offline.
+ */
+void
+bfa_fcs_port_offline(struct bfa_fcs_port_s *port)
+{
+	bfa_sm_send_event(port, BFA_FCS_PORT_SM_OFFLINE);
+}
+
+/**
+ * Called by fabric to delete base lport and associated resources.
+ *
+ * Called by vport to delete lport and associated resources. Should call
+ * bfa_fcs_vport_delete_comp() for vports on completion.
+ */
+void
+bfa_fcs_port_delete(struct bfa_fcs_port_s *port)
+{
+	bfa_sm_send_event(port, BFA_FCS_PORT_SM_DELETE);
+}
+
+/**
+ * Called by fabric in private loop topology to process LIP event.
+ */
+void
+bfa_fcs_port_lip(struct bfa_fcs_port_s *port)
+{
+}
+
+/**
+ * Return TRUE if port is online, else return FALSE
+ */
+bfa_boolean_t
+bfa_fcs_port_is_online(struct bfa_fcs_port_s *port)
+{
+	return (bfa_sm_cmp_state(port, bfa_fcs_port_sm_online));
+}
+
+/**
+ * Logical port initialization of base or virtual port.
+ * Called by fabric for base port or by vport for virtual ports.
+ */
+void
+bfa_fcs_lport_init(struct bfa_fcs_port_s *lport, struct bfa_fcs_s *fcs,
+		   u16 vf_id, struct bfa_port_cfg_s *port_cfg,
+		   struct bfa_fcs_vport_s *vport)
+{
+	lport->fcs = fcs;
+	lport->fabric = bfa_fcs_vf_lookup(fcs, vf_id);
+	bfa_os_assign(lport->port_cfg, *port_cfg);
+	lport->vport = vport;
+	lport->lp_tag = (vport) ? bfa_lps_get_tag(vport->lps) :
+			 bfa_lps_get_tag(lport->fabric->lps);
+
+	INIT_LIST_HEAD(&lport->rport_q);
+	lport->num_rports = 0;
+
+	lport->bfad_port =
+		bfa_fcb_port_new(fcs->bfad, lport, lport->port_cfg.roles,
+				lport->fabric->vf_drv,
+				vport ? vport->vport_drv : NULL);
+	bfa_fcs_port_aen_post(lport, BFA_LPORT_AEN_NEW);
+
+	bfa_sm_set_state(lport, bfa_fcs_port_sm_uninit);
+	bfa_sm_send_event(lport, BFA_FCS_PORT_SM_CREATE);
+}
+
+
+
+/**
+ *  fcs_lport_api
+ */
+
+void
+bfa_fcs_port_get_attr(struct bfa_fcs_port_s *port,
+		      struct bfa_port_attr_s *port_attr)
+{
+	if (bfa_sm_cmp_state(port, bfa_fcs_port_sm_online))
+		port_attr->pid = port->pid;
+	else
+		port_attr->pid = 0;
+
+	port_attr->port_cfg = port->port_cfg;
+
+	if (port->fabric) {
+		port_attr->port_type = bfa_fcs_fabric_port_type(port->fabric);
+		port_attr->loopback = bfa_fcs_fabric_is_loopback(port->fabric);
+		port_attr->fabric_name = bfa_fcs_port_get_fabric_name(port);
+		memcpy(port_attr->fabric_ip_addr,
+		       bfa_fcs_port_get_fabric_ipaddr(port),
+		       BFA_FCS_FABRIC_IPADDR_SZ);
+
+		if (port->vport != NULL)
+			port_attr->port_type = BFA_PPORT_TYPE_VPORT;
+
+	} else {
+		port_attr->port_type = BFA_PPORT_TYPE_UNKNOWN;
+		port_attr->state = BFA_PORT_UNINIT;
+	}
+
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_fcs_port.c b/drivers/scsi/bfa/bfa_fcs_port.c
new file mode 100644
index 000000000000..9c4b24e62de1
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fcs_port.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs_pport.c BFA FCS PPORT ( physical port)
+ */
+
+#include <fcs/bfa_fcs.h>
+#include <bfa_svc.h>
+#include <fcs/bfa_fcs_fabric.h>
+#include "fcs_trcmod.h"
+#include "fcs.h"
+#include "fcs_fabric.h"
+#include "fcs_port.h"
+
+BFA_TRC_FILE(FCS, PPORT);
+
+static void
+bfa_fcs_pport_event_handler(void *cbarg, bfa_pport_event_t event)
+{
+	struct bfa_fcs_s      *fcs = cbarg;
+
+	bfa_trc(fcs, event);
+
+	switch (event) {
+	case BFA_PPORT_LINKUP:
+		bfa_fcs_fabric_link_up(&fcs->fabric);
+		break;
+
+	case BFA_PPORT_LINKDOWN:
+		bfa_fcs_fabric_link_down(&fcs->fabric);
+		break;
+
+	case BFA_PPORT_TRUNK_LINKDOWN:
+		bfa_assert(0);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+void
+bfa_fcs_pport_modinit(struct bfa_fcs_s *fcs)
+{
+	bfa_pport_event_register(fcs->bfa, bfa_fcs_pport_event_handler,
+				     fcs);
+}
+
+void
+bfa_fcs_pport_modexit(struct bfa_fcs_s *fcs)
+{
+	bfa_fcs_modexit_comp(fcs);
+}
diff --git a/drivers/scsi/bfa/bfa_fcs_uf.c b/drivers/scsi/bfa/bfa_fcs_uf.c
new file mode 100644
index 000000000000..ad01db6444b2
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fcs_uf.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs_uf.c BFA FCS UF ( Unsolicited Frames)
+ */
+
+#include <fcs/bfa_fcs.h>
+#include <bfa_svc.h>
+#include <fcs/bfa_fcs_fabric.h>
+#include "fcs.h"
+#include "fcs_trcmod.h"
+#include "fcs_fabric.h"
+#include "fcs_uf.h"
+
+BFA_TRC_FILE(FCS, UF);
+
+/**
+ * 		BFA callback for unsolicited frame receive handler.
+ *
+ * @param[in]		cbarg		callback arg for receive handler
+ * @param[in]		uf		unsolicited frame descriptor
+ *
+ * @return None
+ */
+static void
+bfa_fcs_uf_recv(void *cbarg, struct bfa_uf_s *uf)
+{
+	struct bfa_fcs_s      *fcs = (struct bfa_fcs_s *) cbarg;
+	struct fchs_s         *fchs = bfa_uf_get_frmbuf(uf);
+	u16        len = bfa_uf_get_frmlen(uf);
+	struct fc_vft_s       *vft;
+	struct bfa_fcs_fabric_s *fabric;
+
+	/**
+	 * check for VFT header
+	 */
+	if (fchs->routing == FC_RTG_EXT_HDR &&
+		fchs->cat_info == FC_CAT_VFT_HDR) {
+		bfa_stats(fcs, uf.tagged);
+		vft = bfa_uf_get_frmbuf(uf);
+		if (fcs->port_vfid == vft->vf_id)
+			fabric = &fcs->fabric;
+		else
+			fabric = bfa_fcs_vf_lookup(fcs, (u16) vft->vf_id);
+
+		/**
+		 * drop frame if vfid is unknown
+		 */
+		if (!fabric) {
+			bfa_assert(0);
+			bfa_stats(fcs, uf.vfid_unknown);
+			bfa_uf_free(uf);
+			return;
+		}
+
+		/**
+		 * skip vft header
+		 */
+		fchs = (struct fchs_s *) (vft + 1);
+		len -= sizeof(struct fc_vft_s);
+
+		bfa_trc(fcs, vft->vf_id);
+	} else {
+		bfa_stats(fcs, uf.untagged);
+		fabric = &fcs->fabric;
+	}
+
+	bfa_trc(fcs, ((u32 *) fchs)[0]);
+	bfa_trc(fcs, ((u32 *) fchs)[1]);
+	bfa_trc(fcs, ((u32 *) fchs)[2]);
+	bfa_trc(fcs, ((u32 *) fchs)[3]);
+	bfa_trc(fcs, ((u32 *) fchs)[4]);
+	bfa_trc(fcs, ((u32 *) fchs)[5]);
+	bfa_trc(fcs, len);
+
+	bfa_fcs_fabric_uf_recv(fabric, fchs, len);
+	bfa_uf_free(uf);
+}
+
+void
+bfa_fcs_uf_modinit(struct bfa_fcs_s *fcs)
+{
+	bfa_uf_recv_register(fcs->bfa, bfa_fcs_uf_recv, fcs);
+}
+
+void
+bfa_fcs_uf_modexit(struct bfa_fcs_s *fcs)
+{
+	bfa_fcs_modexit_comp(fcs);
+}
diff --git a/drivers/scsi/bfa/bfa_fcxp.c b/drivers/scsi/bfa/bfa_fcxp.c
new file mode 100644
index 000000000000..4754a0e9006a
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fcxp.c
@@ -0,0 +1,782 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfi/bfi_uf.h>
+#include <cs/bfa_debug.h>
+
+BFA_TRC_FILE(HAL, FCXP);
+BFA_MODULE(fcxp);
+
+/**
+ * forward declarations
+ */
+static void     __bfa_fcxp_send_cbfn(void *cbarg, bfa_boolean_t complete);
+static void     hal_fcxp_rx_plog(struct bfa_s *bfa, struct bfa_fcxp_s *fcxp,
+				 struct bfi_fcxp_send_rsp_s *fcxp_rsp);
+static void     hal_fcxp_tx_plog(struct bfa_s *bfa, u32 reqlen,
+				 struct bfa_fcxp_s *fcxp, struct fchs_s *fchs);
+static void	bfa_fcxp_qresume(void *cbarg);
+static void	bfa_fcxp_queue(struct bfa_fcxp_s *fcxp,
+			       struct bfi_fcxp_send_req_s *send_req);
+
+/**
+ *  fcxp_pvt BFA FCXP private functions
+ */
+
+static void
+claim_fcxp_req_rsp_mem(struct bfa_fcxp_mod_s *mod, struct bfa_meminfo_s *mi)
+{
+	u8        *dm_kva = NULL;
+	u64        dm_pa;
+	u32        buf_pool_sz;
+
+	dm_kva = bfa_meminfo_dma_virt(mi);
+	dm_pa = bfa_meminfo_dma_phys(mi);
+
+	buf_pool_sz = mod->req_pld_sz * mod->num_fcxps;
+
+	/*
+	 * Initialize the fcxp req payload list
+	 */
+	mod->req_pld_list_kva = dm_kva;
+	mod->req_pld_list_pa = dm_pa;
+	dm_kva += buf_pool_sz;
+	dm_pa += buf_pool_sz;
+	bfa_os_memset(mod->req_pld_list_kva, 0, buf_pool_sz);
+
+	/*
+	 * Initialize the fcxp rsp payload list
+	 */
+	buf_pool_sz = mod->rsp_pld_sz * mod->num_fcxps;
+	mod->rsp_pld_list_kva = dm_kva;
+	mod->rsp_pld_list_pa = dm_pa;
+	dm_kva += buf_pool_sz;
+	dm_pa += buf_pool_sz;
+	bfa_os_memset(mod->rsp_pld_list_kva, 0, buf_pool_sz);
+
+	bfa_meminfo_dma_virt(mi) = dm_kva;
+	bfa_meminfo_dma_phys(mi) = dm_pa;
+}
+
+static void
+claim_fcxps_mem(struct bfa_fcxp_mod_s *mod, struct bfa_meminfo_s *mi)
+{
+	u16        i;
+	struct bfa_fcxp_s *fcxp;
+
+	fcxp = (struct bfa_fcxp_s *) bfa_meminfo_kva(mi);
+	bfa_os_memset(fcxp, 0, sizeof(struct bfa_fcxp_s) * mod->num_fcxps);
+
+	INIT_LIST_HEAD(&mod->fcxp_free_q);
+	INIT_LIST_HEAD(&mod->fcxp_active_q);
+
+	mod->fcxp_list = fcxp;
+
+	for (i = 0; i < mod->num_fcxps; i++) {
+		fcxp->fcxp_mod = mod;
+		fcxp->fcxp_tag = i;
+
+		list_add_tail(&fcxp->qe, &mod->fcxp_free_q);
+		bfa_reqq_winit(&fcxp->reqq_wqe, bfa_fcxp_qresume, fcxp);
+		fcxp->reqq_waiting = BFA_FALSE;
+
+		fcxp = fcxp + 1;
+	}
+
+	bfa_meminfo_kva(mi) = (void *)fcxp;
+}
+
+static void
+bfa_fcxp_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len,
+		u32 *dm_len)
+{
+	u16        num_fcxp_reqs = cfg->fwcfg.num_fcxp_reqs;
+
+	if (num_fcxp_reqs == 0)
+		return;
+
+	/*
+	 * Account for req/rsp payload
+	 */
+	*dm_len += BFA_FCXP_MAX_IBUF_SZ * num_fcxp_reqs;
+	if (cfg->drvcfg.min_cfg)
+		*dm_len += BFA_FCXP_MAX_IBUF_SZ * num_fcxp_reqs;
+	else
+		*dm_len += BFA_FCXP_MAX_LBUF_SZ * num_fcxp_reqs;
+
+	/*
+	 * Account for fcxp structs
+	 */
+	*ndm_len += sizeof(struct bfa_fcxp_s) * num_fcxp_reqs;
+}
+
+static void
+bfa_fcxp_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+		    struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+	struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+
+	bfa_os_memset(mod, 0, sizeof(struct bfa_fcxp_mod_s));
+	mod->bfa = bfa;
+	mod->num_fcxps = cfg->fwcfg.num_fcxp_reqs;
+
+	/**
+	 * Initialize FCXP request and response payload sizes.
+	 */
+	mod->req_pld_sz = mod->rsp_pld_sz = BFA_FCXP_MAX_IBUF_SZ;
+	if (!cfg->drvcfg.min_cfg)
+		mod->rsp_pld_sz = BFA_FCXP_MAX_LBUF_SZ;
+
+	INIT_LIST_HEAD(&mod->wait_q);
+
+	claim_fcxp_req_rsp_mem(mod, meminfo);
+	claim_fcxps_mem(mod, meminfo);
+}
+
+static void
+bfa_fcxp_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcxp_detach(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcxp_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcxp_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcxp_iocdisable(struct bfa_s *bfa)
+{
+	struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+	struct bfa_fcxp_s *fcxp;
+	struct list_head        *qe, *qen;
+
+	list_for_each_safe(qe, qen, &mod->fcxp_active_q) {
+		fcxp = (struct bfa_fcxp_s *) qe;
+		if (fcxp->caller == NULL) {
+			fcxp->send_cbfn(fcxp->caller, fcxp, fcxp->send_cbarg,
+					BFA_STATUS_IOC_FAILURE, 0, 0, NULL);
+			bfa_fcxp_free(fcxp);
+		} else {
+			fcxp->rsp_status = BFA_STATUS_IOC_FAILURE;
+			bfa_cb_queue(bfa, &fcxp->hcb_qe,
+				      __bfa_fcxp_send_cbfn, fcxp);
+		}
+	}
+}
+
+static struct bfa_fcxp_s *
+bfa_fcxp_get(struct bfa_fcxp_mod_s *fm)
+{
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_q_deq(&fm->fcxp_free_q, &fcxp);
+
+	if (fcxp)
+		list_add_tail(&fcxp->qe, &fm->fcxp_active_q);
+
+	return (fcxp);
+}
+
+static void
+bfa_fcxp_put(struct bfa_fcxp_s *fcxp)
+{
+	struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+	struct bfa_fcxp_wqe_s *wqe;
+
+	bfa_q_deq(&mod->wait_q, &wqe);
+	if (wqe) {
+		bfa_trc(mod->bfa, fcxp->fcxp_tag);
+		wqe->alloc_cbfn(wqe->alloc_cbarg, fcxp);
+		return;
+	}
+
+	bfa_assert(bfa_q_is_on_q(&mod->fcxp_active_q, fcxp));
+	list_del(&fcxp->qe);
+	list_add_tail(&fcxp->qe, &mod->fcxp_free_q);
+}
+
+static void
+bfa_fcxp_null_comp(void *bfad_fcxp, struct bfa_fcxp_s *fcxp, void *cbarg,
+		       bfa_status_t req_status, u32 rsp_len,
+		       u32 resid_len, struct fchs_s *rsp_fchs)
+{
+	/**discarded fcxp completion */
+}
+
+static void
+__bfa_fcxp_send_cbfn(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_fcxp_s *fcxp = cbarg;
+
+	if (complete) {
+		fcxp->send_cbfn(fcxp->caller, fcxp, fcxp->send_cbarg,
+				fcxp->rsp_status, fcxp->rsp_len,
+				fcxp->residue_len, &fcxp->rsp_fchs);
+	} else {
+		bfa_fcxp_free(fcxp);
+	}
+}
+
+static void
+hal_fcxp_send_comp(struct bfa_s *bfa, struct bfi_fcxp_send_rsp_s *fcxp_rsp)
+{
+	struct bfa_fcxp_mod_s	*mod = BFA_FCXP_MOD(bfa);
+	struct bfa_fcxp_s 	*fcxp;
+	u16		fcxp_tag = bfa_os_ntohs(fcxp_rsp->fcxp_tag);
+
+	bfa_trc(bfa, fcxp_tag);
+
+	fcxp_rsp->rsp_len = bfa_os_ntohl(fcxp_rsp->rsp_len);
+
+	/**
+	 * @todo f/w should not set residue to non-0 when everything
+	 *       is received.
+	 */
+	if (fcxp_rsp->req_status == BFA_STATUS_OK)
+		fcxp_rsp->residue_len = 0;
+	else
+		fcxp_rsp->residue_len = bfa_os_ntohl(fcxp_rsp->residue_len);
+
+	fcxp = BFA_FCXP_FROM_TAG(mod, fcxp_tag);
+
+	bfa_assert(fcxp->send_cbfn != NULL);
+
+	hal_fcxp_rx_plog(mod->bfa, fcxp, fcxp_rsp);
+
+	if (fcxp->send_cbfn != NULL) {
+		if (fcxp->caller == NULL) {
+			bfa_trc(mod->bfa, fcxp->fcxp_tag);
+
+			fcxp->send_cbfn(fcxp->caller, fcxp, fcxp->send_cbarg,
+					fcxp_rsp->req_status, fcxp_rsp->rsp_len,
+					fcxp_rsp->residue_len, &fcxp_rsp->fchs);
+			/*
+			 * fcxp automatically freed on return from the callback
+			 */
+			bfa_fcxp_free(fcxp);
+		} else {
+			bfa_trc(mod->bfa, fcxp->fcxp_tag);
+			fcxp->rsp_status = fcxp_rsp->req_status;
+			fcxp->rsp_len = fcxp_rsp->rsp_len;
+			fcxp->residue_len = fcxp_rsp->residue_len;
+			fcxp->rsp_fchs = fcxp_rsp->fchs;
+
+			bfa_cb_queue(bfa, &fcxp->hcb_qe,
+				      __bfa_fcxp_send_cbfn, fcxp);
+		}
+	} else {
+		bfa_trc(bfa, fcxp_tag);
+	}
+}
+
+static void
+hal_fcxp_set_local_sges(struct bfi_sge_s *sge, u32 reqlen, u64 req_pa)
+{
+	union bfi_addr_u      sga_zero = { {0} };
+
+	sge->sg_len = reqlen;
+	sge->flags = BFI_SGE_DATA_LAST;
+	bfa_dma_addr_set(sge[0].sga, req_pa);
+	bfa_sge_to_be(sge);
+	sge++;
+
+	sge->sga = sga_zero;
+	sge->sg_len = reqlen;
+	sge->flags = BFI_SGE_PGDLEN;
+	bfa_sge_to_be(sge);
+}
+
+static void
+hal_fcxp_tx_plog(struct bfa_s *bfa, u32 reqlen, struct bfa_fcxp_s *fcxp,
+		 struct fchs_s *fchs)
+{
+	/*
+	 * TODO: TX ox_id
+	 */
+	if (reqlen > 0) {
+		if (fcxp->use_ireqbuf) {
+			u32        pld_w0 =
+				*((u32 *) BFA_FCXP_REQ_PLD(fcxp));
+
+			bfa_plog_fchdr_and_pl(bfa->plog, BFA_PL_MID_HAL_FCXP,
+				BFA_PL_EID_TX,
+				reqlen + sizeof(struct fchs_s), fchs, pld_w0);
+		} else {
+			bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_FCXP,
+				BFA_PL_EID_TX, reqlen + sizeof(struct fchs_s),
+				fchs);
+		}
+	} else {
+		bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_FCXP, BFA_PL_EID_TX,
+			       reqlen + sizeof(struct fchs_s), fchs);
+	}
+}
+
+static void
+hal_fcxp_rx_plog(struct bfa_s *bfa, struct bfa_fcxp_s *fcxp,
+		 struct bfi_fcxp_send_rsp_s *fcxp_rsp)
+{
+	if (fcxp_rsp->rsp_len > 0) {
+		if (fcxp->use_irspbuf) {
+			u32        pld_w0 =
+				*((u32 *) BFA_FCXP_RSP_PLD(fcxp));
+
+			bfa_plog_fchdr_and_pl(bfa->plog, BFA_PL_MID_HAL_FCXP,
+					      BFA_PL_EID_RX,
+					      (u16) fcxp_rsp->rsp_len,
+					      &fcxp_rsp->fchs, pld_w0);
+		} else {
+			bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_FCXP,
+				       BFA_PL_EID_RX,
+				       (u16) fcxp_rsp->rsp_len,
+				       &fcxp_rsp->fchs);
+		}
+	} else {
+		bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_FCXP, BFA_PL_EID_RX,
+			       (u16) fcxp_rsp->rsp_len, &fcxp_rsp->fchs);
+	}
+}
+
+/**
+ * Handler to resume sending fcxp when space in available in cpe queue.
+ */
+static void
+bfa_fcxp_qresume(void *cbarg)
+{
+	struct bfa_fcxp_s		*fcxp = cbarg;
+	struct bfa_s			*bfa = fcxp->fcxp_mod->bfa;
+	struct bfi_fcxp_send_req_s	*send_req;
+
+	fcxp->reqq_waiting = BFA_FALSE;
+	send_req = bfa_reqq_next(bfa, BFA_REQQ_FCXP);
+	bfa_fcxp_queue(fcxp, send_req);
+}
+
+/**
+ * Queue fcxp send request to foimrware.
+ */
+static void
+bfa_fcxp_queue(struct bfa_fcxp_s *fcxp, struct bfi_fcxp_send_req_s *send_req)
+{
+	struct bfa_s      		*bfa = fcxp->fcxp_mod->bfa;
+	struct bfa_fcxp_req_info_s	*reqi = &fcxp->req_info;
+	struct bfa_fcxp_rsp_info_s	*rspi = &fcxp->rsp_info;
+	struct bfa_rport_s		*rport = reqi->bfa_rport;
+
+	bfi_h2i_set(send_req->mh, BFI_MC_FCXP, BFI_FCXP_H2I_SEND_REQ,
+			bfa_lpuid(bfa));
+
+	send_req->fcxp_tag = bfa_os_htons(fcxp->fcxp_tag);
+	if (rport) {
+		send_req->rport_fw_hndl = rport->fw_handle;
+		send_req->max_frmsz = bfa_os_htons(rport->rport_info.max_frmsz);
+		if (send_req->max_frmsz == 0)
+			send_req->max_frmsz = bfa_os_htons(FC_MAX_PDUSZ);
+	} else {
+		send_req->rport_fw_hndl = 0;
+		send_req->max_frmsz = bfa_os_htons(FC_MAX_PDUSZ);
+	}
+
+	send_req->vf_id = bfa_os_htons(reqi->vf_id);
+	send_req->lp_tag = reqi->lp_tag;
+	send_req->class = reqi->class;
+	send_req->rsp_timeout = rspi->rsp_timeout;
+	send_req->cts = reqi->cts;
+	send_req->fchs = reqi->fchs;
+
+	send_req->req_len = bfa_os_htonl(reqi->req_tot_len);
+	send_req->rsp_maxlen = bfa_os_htonl(rspi->rsp_maxlen);
+
+	/*
+	 * setup req sgles
+	 */
+	if (fcxp->use_ireqbuf == 1) {
+		hal_fcxp_set_local_sges(send_req->req_sge, reqi->req_tot_len,
+					BFA_FCXP_REQ_PLD_PA(fcxp));
+	} else {
+		if (fcxp->nreq_sgles > 0) {
+			bfa_assert(fcxp->nreq_sgles == 1);
+			hal_fcxp_set_local_sges(send_req->req_sge,
+						reqi->req_tot_len,
+						fcxp->req_sga_cbfn(fcxp->caller,
+								   0));
+		} else {
+			bfa_assert(reqi->req_tot_len == 0);
+			hal_fcxp_set_local_sges(send_req->rsp_sge, 0, 0);
+		}
+	}
+
+	/*
+	 * setup rsp sgles
+	 */
+	if (fcxp->use_irspbuf == 1) {
+		bfa_assert(rspi->rsp_maxlen <= BFA_FCXP_MAX_LBUF_SZ);
+
+		hal_fcxp_set_local_sges(send_req->rsp_sge, rspi->rsp_maxlen,
+					BFA_FCXP_RSP_PLD_PA(fcxp));
+
+	} else {
+		if (fcxp->nrsp_sgles > 0) {
+			bfa_assert(fcxp->nrsp_sgles == 1);
+			hal_fcxp_set_local_sges(send_req->rsp_sge,
+						rspi->rsp_maxlen,
+						fcxp->rsp_sga_cbfn(fcxp->caller,
+								   0));
+		} else {
+			bfa_assert(rspi->rsp_maxlen == 0);
+			hal_fcxp_set_local_sges(send_req->rsp_sge, 0, 0);
+		}
+	}
+
+	hal_fcxp_tx_plog(bfa, reqi->req_tot_len, fcxp, &reqi->fchs);
+
+	bfa_reqq_produce(bfa, BFA_REQQ_FCXP);
+
+	bfa_trc(bfa, bfa_reqq_pi(bfa, BFA_REQQ_FCXP));
+	bfa_trc(bfa, bfa_reqq_ci(bfa, BFA_REQQ_FCXP));
+}
+
+
+/**
+ *  hal_fcxp_api BFA FCXP API
+ */
+
+/**
+ * Allocate an FCXP instance to send a response or to send a request
+ * that has a response. Request/response buffers are allocated by caller.
+ *
+ * @param[in]	bfa		BFA bfa instance
+ * @param[in]	nreq_sgles	Number of SG elements required for request
+ * 				buffer. 0, if fcxp internal buffers are	used.
+ * 				Use bfa_fcxp_get_reqbuf() to get the
+ * 				internal req buffer.
+ * @param[in]	req_sgles	SG elements describing request buffer. Will be
+ * 				copied in by BFA and hence can be freed on
+ * 				return from this function.
+ * @param[in]	get_req_sga	function ptr to be called to get a request SG
+ * 				Address (given the sge index).
+ * @param[in]	get_req_sglen	function ptr to be called to get a request SG
+ * 				len (given the sge index).
+ * @param[in]	get_rsp_sga	function ptr to be called to get a response SG
+ * 				Address (given the sge index).
+ * @param[in]	get_rsp_sglen	function ptr to be called to get a response SG
+ * 				len (given the sge index).
+ *
+ * @return FCXP instance. NULL on failure.
+ */
+struct bfa_fcxp_s *
+bfa_fcxp_alloc(void *caller, struct bfa_s *bfa, int nreq_sgles,
+			int nrsp_sgles, bfa_fcxp_get_sgaddr_t req_sga_cbfn,
+			bfa_fcxp_get_sglen_t req_sglen_cbfn,
+			bfa_fcxp_get_sgaddr_t rsp_sga_cbfn,
+			bfa_fcxp_get_sglen_t rsp_sglen_cbfn)
+{
+	struct bfa_fcxp_s *fcxp = NULL;
+	u32        nreq_sgpg, nrsp_sgpg;
+
+	bfa_assert(bfa != NULL);
+
+	fcxp = bfa_fcxp_get(BFA_FCXP_MOD(bfa));
+	if (fcxp == NULL)
+		return (NULL);
+
+	bfa_trc(bfa, fcxp->fcxp_tag);
+
+	fcxp->caller = caller;
+
+	if (nreq_sgles == 0) {
+		fcxp->use_ireqbuf = 1;
+	} else {
+		bfa_assert(req_sga_cbfn != NULL);
+		bfa_assert(req_sglen_cbfn != NULL);
+
+		fcxp->use_ireqbuf = 0;
+		fcxp->req_sga_cbfn = req_sga_cbfn;
+		fcxp->req_sglen_cbfn = req_sglen_cbfn;
+
+		fcxp->nreq_sgles = nreq_sgles;
+
+		/*
+		 * alloc required sgpgs
+		 */
+		if (nreq_sgles > BFI_SGE_INLINE) {
+			nreq_sgpg = BFA_SGPG_NPAGE(nreq_sgles);
+
+			if (bfa_sgpg_malloc
+			    (bfa, &fcxp->req_sgpg_q, nreq_sgpg)
+			    != BFA_STATUS_OK) {
+				/* bfa_sgpg_wait(bfa, &fcxp->req_sgpg_wqe,
+				nreq_sgpg); */
+				/*
+				 * TODO
+				 */
+			}
+		}
+	}
+
+	if (nrsp_sgles == 0) {
+		fcxp->use_irspbuf = 1;
+	} else {
+		bfa_assert(rsp_sga_cbfn != NULL);
+		bfa_assert(rsp_sglen_cbfn != NULL);
+
+		fcxp->use_irspbuf = 0;
+		fcxp->rsp_sga_cbfn = rsp_sga_cbfn;
+		fcxp->rsp_sglen_cbfn = rsp_sglen_cbfn;
+
+		fcxp->nrsp_sgles = nrsp_sgles;
+		/*
+		 * alloc required sgpgs
+		 */
+		if (nrsp_sgles > BFI_SGE_INLINE) {
+			nrsp_sgpg = BFA_SGPG_NPAGE(nreq_sgles);
+
+			if (bfa_sgpg_malloc
+			    (bfa, &fcxp->rsp_sgpg_q, nrsp_sgpg)
+			    != BFA_STATUS_OK) {
+				/* bfa_sgpg_wait(bfa, &fcxp->rsp_sgpg_wqe,
+				nrsp_sgpg); */
+				/*
+				 * TODO
+				 */
+			}
+		}
+	}
+
+	return (fcxp);
+}
+
+/**
+ * Get the internal request buffer pointer
+ *
+ * @param[in]	fcxp	BFA fcxp pointer
+ *
+ * @return 		pointer to the internal request buffer
+ */
+void *
+bfa_fcxp_get_reqbuf(struct bfa_fcxp_s *fcxp)
+{
+	struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+	void	*reqbuf;
+
+	bfa_assert(fcxp->use_ireqbuf == 1);
+	reqbuf = ((u8 *)mod->req_pld_list_kva) +
+			fcxp->fcxp_tag * mod->req_pld_sz;
+	return reqbuf;
+}
+
+u32
+bfa_fcxp_get_reqbufsz(struct bfa_fcxp_s *fcxp)
+{
+	struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+
+	return mod->req_pld_sz;
+}
+
+/**
+ * Get the internal response buffer pointer
+ *
+ * @param[in]	fcxp	BFA fcxp pointer
+ *
+ * @return		pointer to the internal request buffer
+ */
+void *
+bfa_fcxp_get_rspbuf(struct bfa_fcxp_s *fcxp)
+{
+	struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+	void	*rspbuf;
+
+	bfa_assert(fcxp->use_irspbuf == 1);
+
+	rspbuf = ((u8 *)mod->rsp_pld_list_kva) +
+			fcxp->fcxp_tag * mod->rsp_pld_sz;
+	return rspbuf;
+}
+
+/**
+ * 		Free the BFA FCXP
+ *
+ * @param[in]	fcxp			BFA fcxp pointer
+ *
+ * @return 		void
+ */
+void
+bfa_fcxp_free(struct bfa_fcxp_s *fcxp)
+{
+	struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+
+	bfa_assert(fcxp != NULL);
+	bfa_trc(mod->bfa, fcxp->fcxp_tag);
+	bfa_fcxp_put(fcxp);
+}
+
+/**
+ * Send a FCXP request
+ *
+ * @param[in]	fcxp	BFA fcxp pointer
+ * @param[in]	rport	BFA rport pointer. Could be left NULL for WKA rports
+ * @param[in]	vf_id	virtual Fabric ID
+ * @param[in]	lp_tag  lport tag
+ * @param[in]	cts	use Continous sequence
+ * @param[in]	cos	fc Class of Service
+ * @param[in]	reqlen	request length, does not include FCHS length
+ * @param[in]	fchs	fc Header Pointer. The header content will be copied
+ *			in by BFA.
+ *
+ * @param[in]	cbfn	call back function to be called on receiving
+ * 								the response
+ * @param[in]	cbarg	arg for cbfn
+ * @param[in]	rsp_timeout
+ *			response timeout
+ *
+ * @return		bfa_status_t
+ */
+void
+bfa_fcxp_send(struct bfa_fcxp_s *fcxp, struct bfa_rport_s *rport,
+		u16 vf_id, u8 lp_tag, bfa_boolean_t cts, enum fc_cos cos,
+		u32 reqlen, struct fchs_s *fchs, bfa_cb_fcxp_send_t cbfn,
+		void *cbarg, u32 rsp_maxlen, u8 rsp_timeout)
+{
+	struct bfa_s			*bfa  = fcxp->fcxp_mod->bfa;
+	struct bfa_fcxp_req_info_s	*reqi = &fcxp->req_info;
+	struct bfa_fcxp_rsp_info_s	*rspi = &fcxp->rsp_info;
+	struct bfi_fcxp_send_req_s	*send_req;
+
+	bfa_trc(bfa, fcxp->fcxp_tag);
+
+	/**
+	 * setup request/response info
+	 */
+	reqi->bfa_rport = rport;
+	reqi->vf_id = vf_id;
+	reqi->lp_tag = lp_tag;
+	reqi->class = cos;
+	rspi->rsp_timeout = rsp_timeout;
+	reqi->cts = cts;
+	reqi->fchs = *fchs;
+	reqi->req_tot_len = reqlen;
+	rspi->rsp_maxlen = rsp_maxlen;
+	fcxp->send_cbfn = cbfn ? cbfn : bfa_fcxp_null_comp;
+	fcxp->send_cbarg = cbarg;
+
+	/**
+	 * If no room in CPE queue, wait for
+	 */
+	send_req = bfa_reqq_next(bfa, BFA_REQQ_FCXP);
+	if (!send_req) {
+		bfa_trc(bfa, fcxp->fcxp_tag);
+		fcxp->reqq_waiting = BFA_TRUE;
+		bfa_reqq_wait(bfa, BFA_REQQ_FCXP, &fcxp->reqq_wqe);
+		return;
+	}
+
+	bfa_fcxp_queue(fcxp, send_req);
+}
+
+/**
+ * Abort a BFA FCXP
+ *
+ * @param[in]	fcxp	BFA fcxp pointer
+ *
+ * @return 		void
+ */
+bfa_status_t
+bfa_fcxp_abort(struct bfa_fcxp_s *fcxp)
+{
+	bfa_assert(0);
+	return (BFA_STATUS_OK);
+}
+
+void
+bfa_fcxp_alloc_wait(struct bfa_s *bfa, struct bfa_fcxp_wqe_s *wqe,
+			bfa_fcxp_alloc_cbfn_t alloc_cbfn, void *alloc_cbarg)
+{
+	struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+
+	bfa_assert(list_empty(&mod->fcxp_free_q));
+
+	wqe->alloc_cbfn = alloc_cbfn;
+	wqe->alloc_cbarg = alloc_cbarg;
+	list_add_tail(&wqe->qe, &mod->wait_q);
+}
+
+void
+bfa_fcxp_walloc_cancel(struct bfa_s *bfa, struct bfa_fcxp_wqe_s *wqe)
+{
+	struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+
+	bfa_assert(bfa_q_is_on_q(&mod->wait_q, wqe));
+	list_del(&wqe->qe);
+}
+
+void
+bfa_fcxp_discard(struct bfa_fcxp_s *fcxp)
+{
+	/**
+	 * If waiting for room in request queue, cancel reqq wait
+	 * and free fcxp.
+	 */
+	if (fcxp->reqq_waiting) {
+		fcxp->reqq_waiting = BFA_FALSE;
+		bfa_reqq_wcancel(&fcxp->reqq_wqe);
+		bfa_fcxp_free(fcxp);
+		return;
+	}
+
+	fcxp->send_cbfn = bfa_fcxp_null_comp;
+}
+
+
+
+/**
+ *  hal_fcxp_public BFA FCXP public functions
+ */
+
+void
+bfa_fcxp_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
+{
+	switch (msg->mhdr.msg_id) {
+	case BFI_FCXP_I2H_SEND_RSP:
+		hal_fcxp_send_comp(bfa, (struct bfi_fcxp_send_rsp_s *) msg);
+		break;
+
+	default:
+		bfa_trc(bfa, msg->mhdr.msg_id);
+		bfa_assert(0);
+	}
+}
+
+u32
+bfa_fcxp_get_maxrsp(struct bfa_s *bfa)
+{
+	struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+
+	return mod->rsp_pld_sz;
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_fcxp_priv.h b/drivers/scsi/bfa/bfa_fcxp_priv.h
new file mode 100644
index 000000000000..4cda49397da0
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fcxp_priv.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCXP_PRIV_H__
+#define __BFA_FCXP_PRIV_H__
+
+#include <cs/bfa_sm.h>
+#include <protocol/fc.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_fcxp.h>
+
+#define BFA_FCXP_MIN     	(1)
+#define BFA_FCXP_MAX_IBUF_SZ	(2 * 1024 + 256)
+#define BFA_FCXP_MAX_LBUF_SZ	(4 * 1024 + 256)
+
+struct bfa_fcxp_mod_s {
+	struct bfa_s      *bfa;		/*  backpointer to BFA */
+	struct bfa_fcxp_s *fcxp_list;	/*  array of FCXPs */
+	u16        num_fcxps;	/*  max num FCXP requests */
+	struct list_head fcxp_free_q;	/*  free FCXPs */
+	struct list_head fcxp_active_q;	/*  active FCXPs */
+	void	*req_pld_list_kva;	/*  list of FCXP req pld */
+	u64 req_pld_list_pa;	/*  list of FCXP req pld */
+	void *rsp_pld_list_kva;		/*  list of FCXP resp pld */
+	u64 rsp_pld_list_pa;	/*  list of FCXP resp pld */
+	struct list_head  wait_q;		/*  wait queue for free fcxp */
+	u32	req_pld_sz;
+	u32	rsp_pld_sz;
+};
+
+#define BFA_FCXP_MOD(__bfa)		(&(__bfa)->modules.fcxp_mod)
+#define BFA_FCXP_FROM_TAG(__mod, __tag)	(&(__mod)->fcxp_list[__tag])
+
+typedef void    (*fcxp_send_cb_t) (struct bfa_s *ioc, struct bfa_fcxp_s *fcxp,
+				   void *cb_arg, bfa_status_t req_status,
+				   u32 rsp_len, u32 resid_len,
+				   struct fchs_s *rsp_fchs);
+
+/**
+ * Information needed for a FCXP request
+ */
+struct bfa_fcxp_req_info_s {
+	struct bfa_rport_s *bfa_rport;	/*  Pointer to the bfa rport that was
+					 *returned from bfa_rport_create().
+					 *This could be left NULL for WKA or for
+					 *FCXP interactions before the rport
+					 *nexus is established
+					 */
+	struct fchs_s   fchs;	/*  request FC header structure */
+	u8 cts;		/*  continous sequence */
+	u8 class;		/*  FC class for the request/response */
+	u16 max_frmsz;	/*  max send frame size */
+	u16 vf_id;		/*  vsan tag if applicable */
+	u8	lp_tag;		/*  lport tag */
+	u32 req_tot_len;	/*  request payload total length */
+};
+
+struct bfa_fcxp_rsp_info_s {
+	struct fchs_s rsp_fchs;		/*  Response frame's FC header will
+					 * be *sent back in this field */
+	u8         rsp_timeout;	/*  timeout in seconds, 0-no response
+					 */
+	u8         rsvd2[3];
+	u32        rsp_maxlen;	/*  max response length expected */
+};
+
+struct bfa_fcxp_s {
+	struct list_head 	qe;		/*  fcxp queue element */
+	bfa_sm_t        sm;             /*  state machine */
+	void           	*caller;	/*  driver or fcs */
+	struct bfa_fcxp_mod_s *fcxp_mod;
+					/*  back pointer to fcxp mod */
+	u16        fcxp_tag;	/*  internal tag */
+	struct bfa_fcxp_req_info_s req_info;
+					/*  request info */
+	struct bfa_fcxp_rsp_info_s rsp_info;
+					/*  response info */
+	u8 	use_ireqbuf;	/*  use internal req buf */
+	u8         use_irspbuf;	/*  use internal rsp buf */
+	u32        nreq_sgles;	/*  num request SGLEs */
+	u32        nrsp_sgles;	/*  num response SGLEs */
+	struct list_head req_sgpg_q;	/*  SG pages for request buf */
+	struct list_head req_sgpg_wqe;	/*  wait queue for req SG page */
+	struct list_head rsp_sgpg_q;	/*  SG pages for response buf */
+	struct list_head rsp_sgpg_wqe;	/*  wait queue for rsp SG page */
+
+	bfa_fcxp_get_sgaddr_t req_sga_cbfn;
+					/*  SG elem addr user function */
+	bfa_fcxp_get_sglen_t req_sglen_cbfn;
+					/*  SG elem len user function */
+	bfa_fcxp_get_sgaddr_t rsp_sga_cbfn;
+					/*  SG elem addr user function */
+	bfa_fcxp_get_sglen_t rsp_sglen_cbfn;
+					/*  SG elem len user function */
+	bfa_cb_fcxp_send_t send_cbfn;   /*  send completion callback */
+	void		*send_cbarg;	/*  callback arg */
+	struct bfa_sge_s   req_sge[BFA_FCXP_MAX_SGES];
+					/*  req SG elems */
+	struct bfa_sge_s   rsp_sge[BFA_FCXP_MAX_SGES];
+					/*  rsp SG elems */
+	u8         rsp_status;	/*  comp: rsp status */
+	u32        rsp_len;	/*  comp: actual response len */
+	u32        residue_len;	/*  comp: residual rsp length */
+	struct fchs_s          rsp_fchs;	/*  comp: response fchs */
+	struct bfa_cb_qe_s    hcb_qe;	/*  comp: callback qelem */
+	struct bfa_reqq_wait_s	reqq_wqe;
+	bfa_boolean_t	reqq_waiting;
+};
+
+#define BFA_FCXP_REQ_PLD(_fcxp) 	(bfa_fcxp_get_reqbuf(_fcxp))
+
+#define BFA_FCXP_RSP_FCHS(_fcxp) 	(&((_fcxp)->rsp_info.fchs))
+#define BFA_FCXP_RSP_PLD(_fcxp) 	(bfa_fcxp_get_rspbuf(_fcxp))
+
+#define BFA_FCXP_REQ_PLD_PA(_fcxp)					\
+	((_fcxp)->fcxp_mod->req_pld_list_pa +				\
+		((_fcxp)->fcxp_mod->req_pld_sz  * (_fcxp)->fcxp_tag))
+
+#define BFA_FCXP_RSP_PLD_PA(_fcxp) 					\
+	((_fcxp)->fcxp_mod->rsp_pld_list_pa +				\
+		((_fcxp)->fcxp_mod->rsp_pld_sz * (_fcxp)->fcxp_tag))
+
+void	bfa_fcxp_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+#endif /* __BFA_FCXP_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_fwimg_priv.h b/drivers/scsi/bfa/bfa_fwimg_priv.h
new file mode 100644
index 000000000000..1ec1355924d9
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_fwimg_priv.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FWIMG_PRIV_H__
+#define __BFA_FWIMG_PRIV_H__
+
+#define	BFI_FLASH_CHUNK_SZ		256	/*  Flash chunk size */
+#define	BFI_FLASH_CHUNK_SZ_WORDS	(BFI_FLASH_CHUNK_SZ/sizeof(u32))
+
+extern u32 *bfi_image_ct_get_chunk(u32 off);
+extern u32 bfi_image_ct_size;
+extern u32 *bfi_image_cb_get_chunk(u32 off);
+extern u32 bfi_image_cb_size;
+extern u32 *bfi_image_cb;
+extern u32 *bfi_image_ct;
+
+#endif /* __BFA_FWIMG_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_hw_cb.c b/drivers/scsi/bfa/bfa_hw_cb.c
new file mode 100644
index 000000000000..ede1438619e2
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_hw_cb.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa_priv.h>
+#include <bfi/bfi_cbreg.h>
+
+void
+bfa_hwcb_reginit(struct bfa_s *bfa)
+{
+	struct bfa_iocfc_regs_s	*bfa_regs = &bfa->iocfc.bfa_regs;
+	bfa_os_addr_t		kva = bfa_ioc_bar0(&bfa->ioc);
+	int             	i, q, fn = bfa_ioc_pcifn(&bfa->ioc);
+
+	if (fn == 0) {
+		bfa_regs->intr_status = (kva + HOSTFN0_INT_STATUS);
+		bfa_regs->intr_mask   = (kva + HOSTFN0_INT_MSK);
+	} else {
+		bfa_regs->intr_status = (kva + HOSTFN1_INT_STATUS);
+		bfa_regs->intr_mask   = (kva + HOSTFN1_INT_MSK);
+	}
+
+	for (i = 0; i < BFI_IOC_MAX_CQS; i++) {
+		/*
+		 * CPE registers
+		 */
+		q = CPE_Q_NUM(fn, i);
+		bfa_regs->cpe_q_pi[i] = (kva + CPE_Q_PI(q));
+		bfa_regs->cpe_q_ci[i] = (kva + CPE_Q_CI(q));
+		bfa_regs->cpe_q_depth[i] = (kva + CPE_Q_DEPTH(q));
+
+		/*
+		 * RME registers
+		 */
+		q = CPE_Q_NUM(fn, i);
+		bfa_regs->rme_q_pi[i] = (kva + RME_Q_PI(q));
+		bfa_regs->rme_q_ci[i] = (kva + RME_Q_CI(q));
+		bfa_regs->rme_q_depth[i] = (kva + RME_Q_DEPTH(q));
+	}
+}
+
+void
+bfa_hwcb_rspq_ack(struct bfa_s *bfa, int rspq)
+{
+}
+
+static void
+bfa_hwcb_rspq_ack_msix(struct bfa_s *bfa, int rspq)
+{
+	bfa_reg_write(bfa->iocfc.bfa_regs.intr_status,
+		__HFN_INT_RME_Q0 << RME_Q_NUM(bfa_ioc_pcifn(&bfa->ioc), rspq));
+}
+
+void
+bfa_hwcb_msix_getvecs(struct bfa_s *bfa, u32 *msix_vecs_bmap,
+		 u32 *num_vecs, u32 *max_vec_bit)
+{
+#define __HFN_NUMINTS	13
+	if (bfa_ioc_pcifn(&bfa->ioc) == 0) {
+		*msix_vecs_bmap = (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 |
+				   __HFN_INT_CPE_Q2 | __HFN_INT_CPE_Q3 |
+				   __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 |
+				   __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 |
+				   __HFN_INT_MBOX_LPU0);
+		*max_vec_bit = __HFN_INT_MBOX_LPU0;
+	} else {
+		*msix_vecs_bmap = (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 |
+				   __HFN_INT_CPE_Q6 | __HFN_INT_CPE_Q7 |
+				   __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 |
+				   __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 |
+				   __HFN_INT_MBOX_LPU1);
+		*max_vec_bit = __HFN_INT_MBOX_LPU1;
+	}
+
+	*msix_vecs_bmap |= (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 |
+			    __HFN_INT_ERR_LPU1 | __HFN_INT_ERR_PSS);
+	*num_vecs = __HFN_NUMINTS;
+}
+
+/**
+ * No special setup required for crossbow -- vector assignments are implicit.
+ */
+void
+bfa_hwcb_msix_init(struct bfa_s *bfa, int nvecs)
+{
+	int i;
+
+	bfa_assert((nvecs == 1) || (nvecs == __HFN_NUMINTS));
+
+	bfa->msix.nvecs = nvecs;
+	if (nvecs == 1) {
+		for (i = 0; i < BFA_MSIX_CB_MAX; i++)
+			bfa->msix.handler[i] = bfa_msix_all;
+		return;
+	}
+
+	for (i = BFA_MSIX_CPE_Q0; i <= BFA_MSIX_CPE_Q7; i++)
+		bfa->msix.handler[i] = bfa_msix_reqq;
+
+	for (i = BFA_MSIX_RME_Q0; i <= BFA_MSIX_RME_Q7; i++)
+		bfa->msix.handler[i] = bfa_msix_rspq;
+
+	for (; i < BFA_MSIX_CB_MAX; i++)
+		bfa->msix.handler[i] = bfa_msix_lpu_err;
+}
+
+/**
+ * Crossbow -- dummy, interrupts are masked
+ */
+void
+bfa_hwcb_msix_install(struct bfa_s *bfa)
+{
+}
+
+void
+bfa_hwcb_msix_uninstall(struct bfa_s *bfa)
+{
+}
+
+/**
+ * No special enable/disable -- vector assignments are implicit.
+ */
+void
+bfa_hwcb_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix)
+{
+	bfa->iocfc.hwif.hw_rspq_ack = bfa_hwcb_rspq_ack_msix;
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_hw_ct.c b/drivers/scsi/bfa/bfa_hw_ct.c
new file mode 100644
index 000000000000..51ae5740e6e9
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_hw_ct.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa_priv.h>
+#include <bfi/bfi_ctreg.h>
+#include <bfa_ioc.h>
+
+BFA_TRC_FILE(HAL, IOCFC_CT);
+
+static u32 __ct_msix_err_vec_reg[] = {
+	HOST_MSIX_ERR_INDEX_FN0,
+	HOST_MSIX_ERR_INDEX_FN1,
+	HOST_MSIX_ERR_INDEX_FN2,
+	HOST_MSIX_ERR_INDEX_FN3,
+};
+
+static void
+bfa_hwct_msix_lpu_err_set(struct bfa_s *bfa, bfa_boolean_t msix, int vec)
+{
+	int fn = bfa_ioc_pcifn(&bfa->ioc);
+	bfa_os_addr_t kva = bfa_ioc_bar0(&bfa->ioc);
+
+	if (msix)
+		bfa_reg_write(kva + __ct_msix_err_vec_reg[fn], vec);
+	else
+		bfa_reg_write(kva + __ct_msix_err_vec_reg[fn], 0);
+}
+
+/**
+ * Dummy interrupt handler for handling spurious interrupt during chip-reinit.
+ */
+static void
+bfa_hwct_msix_dummy(struct bfa_s *bfa, int vec)
+{
+}
+
+void
+bfa_hwct_reginit(struct bfa_s *bfa)
+{
+	struct bfa_iocfc_regs_s	*bfa_regs = &bfa->iocfc.bfa_regs;
+	bfa_os_addr_t		kva = bfa_ioc_bar0(&bfa->ioc);
+	int             	i, q, fn = bfa_ioc_pcifn(&bfa->ioc);
+
+	if (fn == 0) {
+		bfa_regs->intr_status = (kva + HOSTFN0_INT_STATUS);
+		bfa_regs->intr_mask   = (kva + HOSTFN0_INT_MSK);
+	} else {
+		bfa_regs->intr_status = (kva + HOSTFN1_INT_STATUS);
+		bfa_regs->intr_mask   = (kva + HOSTFN1_INT_MSK);
+	}
+
+	for (i = 0; i < BFI_IOC_MAX_CQS; i++) {
+		/*
+		 * CPE registers
+		 */
+		q = CPE_Q_NUM(fn, i);
+		bfa_regs->cpe_q_pi[i] = (kva + CPE_PI_PTR_Q(q << 5));
+		bfa_regs->cpe_q_ci[i] = (kva + CPE_CI_PTR_Q(q << 5));
+		bfa_regs->cpe_q_depth[i] = (kva + CPE_DEPTH_Q(q << 5));
+		bfa_regs->cpe_q_ctrl[i] = (kva + CPE_QCTRL_Q(q << 5));
+
+		/*
+		 * RME registers
+		 */
+		q = CPE_Q_NUM(fn, i);
+		bfa_regs->rme_q_pi[i] = (kva + RME_PI_PTR_Q(q << 5));
+		bfa_regs->rme_q_ci[i] = (kva + RME_CI_PTR_Q(q << 5));
+		bfa_regs->rme_q_depth[i] = (kva + RME_DEPTH_Q(q << 5));
+		bfa_regs->rme_q_ctrl[i] = (kva + RME_QCTRL_Q(q << 5));
+	}
+}
+
+void
+bfa_hwct_rspq_ack(struct bfa_s *bfa, int rspq)
+{
+	u32	r32;
+
+	r32 = bfa_reg_read(bfa->iocfc.bfa_regs.rme_q_ctrl[rspq]);
+	bfa_reg_write(bfa->iocfc.bfa_regs.rme_q_ctrl[rspq], r32);
+}
+
+void
+bfa_hwct_msix_getvecs(struct bfa_s *bfa, u32 *msix_vecs_bmap,
+		 u32 *num_vecs, u32 *max_vec_bit)
+{
+	*msix_vecs_bmap = (1 << BFA_MSIX_CT_MAX) - 1;
+	*max_vec_bit = (1 << (BFA_MSIX_CT_MAX - 1));
+	*num_vecs = BFA_MSIX_CT_MAX;
+}
+
+/**
+ * Setup MSI-X vector for catapult
+ */
+void
+bfa_hwct_msix_init(struct bfa_s *bfa, int nvecs)
+{
+	bfa_assert((nvecs == 1) || (nvecs == BFA_MSIX_CT_MAX));
+	bfa_trc(bfa, nvecs);
+
+	bfa->msix.nvecs = nvecs;
+	bfa_hwct_msix_uninstall(bfa);
+}
+
+void
+bfa_hwct_msix_install(struct bfa_s *bfa)
+{
+	int i;
+
+	if (bfa->msix.nvecs == 0)
+		return;
+
+	if (bfa->msix.nvecs == 1) {
+		for (i = 0; i < BFA_MSIX_CT_MAX; i++)
+			bfa->msix.handler[i] = bfa_msix_all;
+		return;
+	}
+
+	for (i = BFA_MSIX_CPE_Q0; i <= BFA_MSIX_CPE_Q3; i++)
+		bfa->msix.handler[i] = bfa_msix_reqq;
+
+	for (; i <= BFA_MSIX_RME_Q3; i++)
+		bfa->msix.handler[i] = bfa_msix_rspq;
+
+	bfa_assert(i == BFA_MSIX_LPU_ERR);
+	bfa->msix.handler[BFA_MSIX_LPU_ERR] = bfa_msix_lpu_err;
+}
+
+void
+bfa_hwct_msix_uninstall(struct bfa_s *bfa)
+{
+	int i;
+
+	for (i = 0; i < BFA_MSIX_CT_MAX; i++)
+		bfa->msix.handler[i] = bfa_hwct_msix_dummy;
+}
+
+/**
+ * Enable MSI-X vectors
+ */
+void
+bfa_hwct_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix)
+{
+	bfa_trc(bfa, 0);
+	bfa_hwct_msix_lpu_err_set(bfa, msix, BFA_MSIX_LPU_ERR);
+	bfa_ioc_isr_mode_set(&bfa->ioc, msix);
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_intr.c b/drivers/scsi/bfa/bfa_intr.c
new file mode 100644
index 000000000000..0ca125712a04
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_intr.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#include <bfa.h>
+#include <bfi/bfi_cbreg.h>
+#include <bfa_port_priv.h>
+#include <bfa_intr_priv.h>
+#include <cs/bfa_debug.h>
+
+BFA_TRC_FILE(HAL, INTR);
+
+static void
+bfa_msix_errint(struct bfa_s *bfa, u32 intr)
+{
+	bfa_ioc_error_isr(&bfa->ioc);
+}
+
+static void
+bfa_msix_lpu(struct bfa_s *bfa)
+{
+	bfa_ioc_mbox_isr(&bfa->ioc);
+}
+
+void
+bfa_msix_all(struct bfa_s *bfa, int vec)
+{
+	bfa_intx(bfa);
+}
+
+/**
+ *  hal_intr_api
+ */
+bfa_boolean_t
+bfa_intx(struct bfa_s *bfa)
+{
+	u32        intr, qintr;
+	int             queue;
+
+	intr = bfa_reg_read(bfa->iocfc.bfa_regs.intr_status);
+	if (!intr)
+		return BFA_FALSE;
+
+	/**
+	 * RME completion queue interrupt
+	 */
+	qintr = intr & __HFN_INT_RME_MASK;
+	bfa_reg_write(bfa->iocfc.bfa_regs.intr_status, qintr);
+
+	for (queue = 0; queue < BFI_IOC_MAX_CQS_ASIC; queue ++) {
+		if (intr & (__HFN_INT_RME_Q0 << queue))
+			bfa_msix_rspq(bfa, queue & (BFI_IOC_MAX_CQS - 1));
+	}
+	intr &= ~qintr;
+	if (!intr)
+		return BFA_TRUE;
+
+	/**
+	 * CPE completion queue interrupt
+	 */
+	qintr = intr & __HFN_INT_CPE_MASK;
+	bfa_reg_write(bfa->iocfc.bfa_regs.intr_status, qintr);
+
+	for (queue = 0; queue < BFI_IOC_MAX_CQS_ASIC; queue++) {
+		if (intr & (__HFN_INT_CPE_Q0 << queue))
+			bfa_msix_reqq(bfa, queue & (BFI_IOC_MAX_CQS - 1));
+	}
+	intr &= ~qintr;
+	if (!intr)
+		return BFA_TRUE;
+
+	bfa_msix_lpu_err(bfa, intr);
+
+	return BFA_TRUE;
+}
+
+void
+bfa_isr_enable(struct bfa_s *bfa)
+{
+	u32        intr_unmask;
+	int             pci_func = bfa_ioc_pcifn(&bfa->ioc);
+
+	bfa_trc(bfa, pci_func);
+
+	bfa_msix_install(bfa);
+	intr_unmask = (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 |
+		       __HFN_INT_ERR_LPU1 | __HFN_INT_ERR_PSS);
+
+	if (pci_func == 0)
+		intr_unmask |= (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 |
+				__HFN_INT_CPE_Q2 | __HFN_INT_CPE_Q3 |
+				__HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 |
+				__HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 |
+				__HFN_INT_MBOX_LPU0);
+	else
+		intr_unmask |= (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 |
+				__HFN_INT_CPE_Q6 | __HFN_INT_CPE_Q7 |
+				__HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 |
+				__HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 |
+				__HFN_INT_MBOX_LPU1);
+
+	bfa_reg_write(bfa->iocfc.bfa_regs.intr_status, intr_unmask);
+	bfa_reg_write(bfa->iocfc.bfa_regs.intr_mask, ~intr_unmask);
+	bfa_isr_mode_set(bfa, bfa->msix.nvecs != 0);
+}
+
+void
+bfa_isr_disable(struct bfa_s *bfa)
+{
+	bfa_isr_mode_set(bfa, BFA_FALSE);
+	bfa_reg_write(bfa->iocfc.bfa_regs.intr_mask, -1L);
+	bfa_msix_uninstall(bfa);
+}
+
+void
+bfa_msix_reqq(struct bfa_s *bfa, int qid)
+{
+	struct list_head 		*waitq, *qe, *qen;
+	struct bfa_reqq_wait_s	*wqe;
+
+	qid &= (BFI_IOC_MAX_CQS - 1);
+
+	waitq = bfa_reqq(bfa, qid);
+	list_for_each_safe(qe, qen, waitq) {
+		/**
+		 * Callback only as long as there is room in request queue
+		 */
+		if (bfa_reqq_full(bfa, qid))
+			break;
+
+		list_del(qe);
+		wqe = (struct bfa_reqq_wait_s *) qe;
+		wqe->qresume(wqe->cbarg);
+	}
+}
+
+void
+bfa_isr_unhandled(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+	bfa_trc(bfa, m->mhdr.msg_class);
+	bfa_trc(bfa, m->mhdr.msg_id);
+	bfa_trc(bfa, m->mhdr.mtag.i2htok);
+	bfa_assert(0);
+	bfa_trc_stop(bfa->trcmod);
+}
+
+void
+bfa_msix_rspq(struct bfa_s *bfa, int rsp_qid)
+{
+	struct bfi_msg_s      *m;
+	u32        pi, ci;
+
+	bfa_trc_fp(bfa, rsp_qid);
+
+	rsp_qid &= (BFI_IOC_MAX_CQS - 1);
+
+	bfa->iocfc.hwif.hw_rspq_ack(bfa, rsp_qid);
+
+	ci = bfa_rspq_ci(bfa, rsp_qid);
+	pi = bfa_rspq_pi(bfa, rsp_qid);
+
+	bfa_trc_fp(bfa, ci);
+	bfa_trc_fp(bfa, pi);
+
+	if (bfa->rme_process) {
+		while (ci != pi) {
+			m = bfa_rspq_elem(bfa, rsp_qid, ci);
+			bfa_assert_fp(m->mhdr.msg_class < BFI_MC_MAX);
+
+			bfa_isrs[m->mhdr.msg_class] (bfa, m);
+
+			CQ_INCR(ci, bfa->iocfc.cfg.drvcfg.num_rspq_elems);
+		}
+	}
+
+	/**
+	 * update CI
+	 */
+	bfa_rspq_ci(bfa, rsp_qid) = pi;
+	bfa_reg_write(bfa->iocfc.bfa_regs.rme_q_ci[rsp_qid], pi);
+	bfa_os_mmiowb();
+}
+
+void
+bfa_msix_lpu_err(struct bfa_s *bfa, int vec)
+{
+	u32 intr;
+
+	intr = bfa_reg_read(bfa->iocfc.bfa_regs.intr_status);
+
+	if (intr & (__HFN_INT_MBOX_LPU0 | __HFN_INT_MBOX_LPU1))
+		bfa_msix_lpu(bfa);
+
+	if (intr & (__HFN_INT_ERR_EMC |
+		    __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 |
+		    __HFN_INT_ERR_PSS))
+		bfa_msix_errint(bfa, intr);
+}
+
+void
+bfa_isr_bind(enum bfi_mclass mc, bfa_isr_func_t isr_func)
+{
+	bfa_isrs[mc] = isr_func;
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_intr_priv.h b/drivers/scsi/bfa/bfa_intr_priv.h
new file mode 100644
index 000000000000..8ce6e6b105c8
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_intr_priv.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_INTR_PRIV_H__
+#define __BFA_INTR_PRIV_H__
+
+/**
+ * Message handler
+ */
+typedef void (*bfa_isr_func_t) (struct bfa_s *bfa, struct bfi_msg_s *m);
+void bfa_isr_unhandled(struct bfa_s *bfa, struct bfi_msg_s *m);
+void bfa_isr_bind(enum bfi_mclass mc, bfa_isr_func_t isr_func);
+
+
+#define bfa_reqq_pi(__bfa, __reqq)	(__bfa)->iocfc.req_cq_pi[__reqq]
+#define bfa_reqq_ci(__bfa, __reqq)					\
+	*(u32 *)((__bfa)->iocfc.req_cq_shadow_ci[__reqq].kva)
+
+#define bfa_reqq_full(__bfa, __reqq)				\
+	(((bfa_reqq_pi(__bfa, __reqq) + 1) &			\
+	  ((__bfa)->iocfc.cfg.drvcfg.num_reqq_elems - 1)) ==	\
+	 bfa_reqq_ci(__bfa, __reqq))
+
+#define bfa_reqq_next(__bfa, __reqq)				\
+	(bfa_reqq_full(__bfa, __reqq) ? NULL :			\
+	 ((void *)((struct bfi_msg_s *)((__bfa)->iocfc.req_cq_ba[__reqq].kva) \
+			  + bfa_reqq_pi((__bfa), (__reqq)))))
+
+#define bfa_reqq_produce(__bfa, __reqq)	do {				\
+	(__bfa)->iocfc.req_cq_pi[__reqq]++;				\
+	(__bfa)->iocfc.req_cq_pi[__reqq] &=				\
+		((__bfa)->iocfc.cfg.drvcfg.num_reqq_elems - 1);      \
+	bfa_reg_write((__bfa)->iocfc.bfa_regs.cpe_q_pi[__reqq],		\
+				(__bfa)->iocfc.req_cq_pi[__reqq]);      \
+	bfa_os_mmiowb();      \
+} while (0)
+
+#define bfa_rspq_pi(__bfa, __rspq)					\
+	*(u32 *)((__bfa)->iocfc.rsp_cq_shadow_pi[__rspq].kva)
+
+#define bfa_rspq_ci(__bfa, __rspq)	(__bfa)->iocfc.rsp_cq_ci[__rspq]
+#define bfa_rspq_elem(__bfa, __rspq, __ci)				\
+	&((struct bfi_msg_s *)((__bfa)->iocfc.rsp_cq_ba[__rspq].kva))[__ci]
+
+#define CQ_INCR(__index, __size)					\
+			(__index)++; (__index) &= ((__size) - 1)
+
+/**
+ * Queue element to wait for room in request queue. FIFO order is
+ * maintained when fullfilling requests.
+ */
+struct bfa_reqq_wait_s {
+	struct list_head 	qe;
+	void		(*qresume) (void *cbarg);
+	void		*cbarg;
+};
+
+/**
+ * Circular queue usage assignments
+ */
+enum {
+	BFA_REQQ_IOC	= 0,	/*  all low-priority IOC msgs	*/
+	BFA_REQQ_FCXP	= 0,	/*  all FCXP messages		*/
+	BFA_REQQ_LPS	= 0,	/*  all lport service msgs	*/
+	BFA_REQQ_PORT	= 0,	/*  all port messages		*/
+	BFA_REQQ_FLASH	= 0,	/*  for flash module		*/
+	BFA_REQQ_DIAG	= 0,	/*  for diag module		*/
+	BFA_REQQ_RPORT	= 0,	/*  all port messages		*/
+	BFA_REQQ_SBOOT	= 0,	/*  all san boot messages	*/
+	BFA_REQQ_QOS_LO	= 1,	/*  all low priority IO	*/
+	BFA_REQQ_QOS_MD	= 2,	/*  all medium priority IO	*/
+	BFA_REQQ_QOS_HI	= 3,	/*  all high priority IO	*/
+};
+
+static inline void
+bfa_reqq_winit(struct bfa_reqq_wait_s *wqe, void (*qresume) (void *cbarg),
+			void *cbarg)
+{
+	wqe->qresume = qresume;
+	wqe->cbarg = cbarg;
+}
+
+#define bfa_reqq(__bfa, __reqq)	&(__bfa)->reqq_waitq[__reqq]
+
+/**
+ * static inline void
+ * bfa_reqq_wait(struct bfa_s *bfa, int reqq, struct bfa_reqq_wait_s *wqe)
+ */
+#define bfa_reqq_wait(__bfa, __reqq, __wqe) do {			\
+									\
+		struct list_head *waitq = bfa_reqq(__bfa, __reqq);      \
+									\
+		bfa_assert(((__reqq) < BFI_IOC_MAX_CQS));      \
+		bfa_assert((__wqe)->qresume && (__wqe)->cbarg);      \
+									\
+		list_add_tail(&(__wqe)->qe, waitq);      \
+} while (0)
+
+#define bfa_reqq_wcancel(__wqe)	list_del(&(__wqe)->qe)
+
+#endif /* __BFA_INTR_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c
new file mode 100644
index 000000000000..149348934ce3
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -0,0 +1,2382 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_ioc.h>
+#include <bfa_fwimg_priv.h>
+#include <bfa_trcmod_priv.h>
+#include <cs/bfa_debug.h>
+#include <bfi/bfi_ioc.h>
+#include <bfi/bfi_ctreg.h>
+#include <aen/bfa_aen_ioc.h>
+#include <aen/bfa_aen.h>
+#include <log/bfa_log_hal.h>
+#include <defs/bfa_defs_pci.h>
+
+BFA_TRC_FILE(HAL, IOC);
+
+/**
+ * IOC local definitions
+ */
+#define BFA_IOC_TOV		2000	/* msecs */
+#define BFA_IOC_HB_TOV		1000	/* msecs */
+#define BFA_IOC_HB_FAIL_MAX	4
+#define BFA_IOC_HWINIT_MAX	2
+#define BFA_IOC_FWIMG_MINSZ     (16 * 1024)
+#define BFA_IOC_TOV_RECOVER	(BFA_IOC_HB_FAIL_MAX * BFA_IOC_HB_TOV \
+				+ BFA_IOC_TOV)
+
+#define bfa_ioc_timer_start(__ioc)					\
+	bfa_timer_begin((__ioc)->timer_mod, &(__ioc)->ioc_timer,	\
+			bfa_ioc_timeout, (__ioc), BFA_IOC_TOV)
+#define bfa_ioc_timer_stop(__ioc)   bfa_timer_stop(&(__ioc)->ioc_timer)
+
+#define BFA_DBG_FWTRC_ENTS	(BFI_IOC_TRC_ENTS)
+#define BFA_DBG_FWTRC_LEN					\
+	(BFA_DBG_FWTRC_ENTS * sizeof(struct bfa_trc_s) +	\
+	 (sizeof(struct bfa_trc_mod_s) -			\
+	  BFA_TRC_MAX * sizeof(struct bfa_trc_s)))
+#define BFA_DBG_FWTRC_OFF(_fn)	(BFI_IOC_TRC_OFF + BFA_DBG_FWTRC_LEN * (_fn))
+#define bfa_ioc_stats(_ioc, _stats)	(_ioc)->stats._stats ++
+
+#define BFA_FLASH_CHUNK_NO(off)         (off / BFI_FLASH_CHUNK_SZ_WORDS)
+#define BFA_FLASH_OFFSET_IN_CHUNK(off)  (off % BFI_FLASH_CHUNK_SZ_WORDS)
+#define BFA_FLASH_CHUNK_ADDR(chunkno)   (chunkno * BFI_FLASH_CHUNK_SZ_WORDS)
+bfa_boolean_t   bfa_auto_recover = BFA_FALSE;
+
+/*
+ * forward declarations
+ */
+static void     bfa_ioc_aen_post(struct bfa_ioc_s *bfa,
+				 enum bfa_ioc_aen_event event);
+static void     bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_hw_sem_release(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_hw_sem_get_cancel(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_hwinit(struct bfa_ioc_s *ioc, bfa_boolean_t force);
+static void     bfa_ioc_timeout(void *ioc);
+static void     bfa_ioc_send_enable(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_send_disable(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_send_getattr(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_hb_monitor(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_hb_stop(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_reset(struct bfa_ioc_s *ioc, bfa_boolean_t force);
+static void     bfa_ioc_mbox_poll(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_mbox_hbfail(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_recover(struct bfa_ioc_s *ioc);
+static bfa_boolean_t bfa_ioc_firmware_lock(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_firmware_unlock(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_disable_comp(struct bfa_ioc_s *ioc);
+static void     bfa_ioc_lpu_stop(struct bfa_ioc_s *ioc);
+
+/**
+ *  bfa_ioc_sm
+ */
+
+/**
+ * IOC state machine events
+ */
+enum ioc_event {
+	IOC_E_ENABLE = 1,	/*  IOC enable request */
+	IOC_E_DISABLE = 2,	/*  IOC disable request */
+	IOC_E_TIMEOUT = 3,	/*  f/w response timeout */
+	IOC_E_FWREADY = 4,	/*  f/w initialization done */
+	IOC_E_FWRSP_GETATTR = 5,	/*  IOC get attribute response */
+	IOC_E_FWRSP_ENABLE = 6,	/*  enable f/w response */
+	IOC_E_FWRSP_DISABLE = 7,	/*  disable f/w response */
+	IOC_E_HBFAIL = 8,	/*  heartbeat failure */
+	IOC_E_HWERROR = 9,	/*  hardware error interrupt */
+	IOC_E_SEMLOCKED = 10,	/*  h/w semaphore is locked */
+	IOC_E_DETACH = 11,	/*  driver detach cleanup */
+};
+
+bfa_fsm_state_decl(bfa_ioc, reset, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, fwcheck, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, mismatch, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, semwait, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, hwinit, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, enabling, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, getattr, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, op, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, initfail, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, hbfail, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, disabling, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, disabled, struct bfa_ioc_s, enum ioc_event);
+
+static struct bfa_sm_table_s ioc_sm_table[] = {
+	{BFA_SM(bfa_ioc_sm_reset), BFA_IOC_RESET},
+	{BFA_SM(bfa_ioc_sm_fwcheck), BFA_IOC_FWMISMATCH},
+	{BFA_SM(bfa_ioc_sm_mismatch), BFA_IOC_FWMISMATCH},
+	{BFA_SM(bfa_ioc_sm_semwait), BFA_IOC_SEMWAIT},
+	{BFA_SM(bfa_ioc_sm_hwinit), BFA_IOC_HWINIT},
+	{BFA_SM(bfa_ioc_sm_enabling), BFA_IOC_HWINIT},
+	{BFA_SM(bfa_ioc_sm_getattr), BFA_IOC_GETATTR},
+	{BFA_SM(bfa_ioc_sm_op), BFA_IOC_OPERATIONAL},
+	{BFA_SM(bfa_ioc_sm_initfail), BFA_IOC_INITFAIL},
+	{BFA_SM(bfa_ioc_sm_hbfail), BFA_IOC_HBFAIL},
+	{BFA_SM(bfa_ioc_sm_disabling), BFA_IOC_DISABLING},
+	{BFA_SM(bfa_ioc_sm_disabled), BFA_IOC_DISABLED},
+};
+
+/**
+ * Reset entry actions -- initialize state machine
+ */
+static void
+bfa_ioc_sm_reset_entry(struct bfa_ioc_s *ioc)
+{
+	ioc->retry_count = 0;
+	ioc->auto_recover = bfa_auto_recover;
+}
+
+/**
+ * Beginning state. IOC is in reset state.
+ */
+static void
+bfa_ioc_sm_reset(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_ENABLE:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fwcheck);
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_ioc_disable_comp(ioc);
+		break;
+
+	case IOC_E_DETACH:
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+/**
+ * Semaphore should be acquired for version check.
+ */
+static void
+bfa_ioc_sm_fwcheck_entry(struct bfa_ioc_s *ioc)
+{
+	bfa_ioc_hw_sem_get(ioc);
+}
+
+/**
+ * Awaiting h/w semaphore to continue with version check.
+ */
+static void
+bfa_ioc_sm_fwcheck(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_SEMLOCKED:
+		if (bfa_ioc_firmware_lock(ioc)) {
+			ioc->retry_count = 0;
+			bfa_fsm_set_state(ioc, bfa_ioc_sm_hwinit);
+		} else {
+			bfa_ioc_hw_sem_release(ioc);
+			bfa_fsm_set_state(ioc, bfa_ioc_sm_mismatch);
+		}
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_ioc_disable_comp(ioc);
+		/*
+		 * fall through
+		 */
+
+	case IOC_E_DETACH:
+		bfa_ioc_hw_sem_get_cancel(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+		break;
+
+	case IOC_E_FWREADY:
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+/**
+ * Notify enable completion callback and generate mismatch AEN.
+ */
+static void
+bfa_ioc_sm_mismatch_entry(struct bfa_ioc_s *ioc)
+{
+	/**
+	 * Provide enable completion callback and AEN notification only once.
+	 */
+	if (ioc->retry_count == 0) {
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		bfa_ioc_aen_post(ioc, BFA_IOC_AEN_FWMISMATCH);
+	}
+	ioc->retry_count++;
+	bfa_ioc_timer_start(ioc);
+}
+
+/**
+ * Awaiting firmware version match.
+ */
+static void
+bfa_ioc_sm_mismatch(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_TIMEOUT:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fwcheck);
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_ioc_disable_comp(ioc);
+		/*
+		 * fall through
+		 */
+
+	case IOC_E_DETACH:
+		bfa_ioc_timer_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+		break;
+
+	case IOC_E_FWREADY:
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+/**
+ * Request for semaphore.
+ */
+static void
+bfa_ioc_sm_semwait_entry(struct bfa_ioc_s *ioc)
+{
+	bfa_ioc_hw_sem_get(ioc);
+}
+
+/**
+ * Awaiting semaphore for h/w initialzation.
+ */
+static void
+bfa_ioc_sm_semwait(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_SEMLOCKED:
+		ioc->retry_count = 0;
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_hwinit);
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_ioc_hw_sem_get_cancel(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+
+static void
+bfa_ioc_sm_hwinit_entry(struct bfa_ioc_s *ioc)
+{
+	bfa_ioc_timer_start(ioc);
+	bfa_ioc_reset(ioc, BFA_FALSE);
+}
+
+/**
+ * Hardware is being initialized. Interrupts are enabled.
+ * Holding hardware semaphore lock.
+ */
+static void
+bfa_ioc_sm_hwinit(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_FWREADY:
+		bfa_ioc_timer_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_enabling);
+		break;
+
+	case IOC_E_HWERROR:
+		bfa_ioc_timer_stop(ioc);
+		/*
+		 * fall through
+		 */
+
+	case IOC_E_TIMEOUT:
+		ioc->retry_count++;
+		if (ioc->retry_count < BFA_IOC_HWINIT_MAX) {
+			bfa_ioc_timer_start(ioc);
+			bfa_ioc_reset(ioc, BFA_TRUE);
+			break;
+		}
+
+		bfa_ioc_hw_sem_release(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_ioc_hw_sem_release(ioc);
+		bfa_ioc_timer_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+
+static void
+bfa_ioc_sm_enabling_entry(struct bfa_ioc_s *ioc)
+{
+	bfa_ioc_timer_start(ioc);
+	bfa_ioc_send_enable(ioc);
+}
+
+/**
+ * Host IOC function is being enabled, awaiting response from firmware.
+ * Semaphore is acquired.
+ */
+static void
+bfa_ioc_sm_enabling(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_FWRSP_ENABLE:
+		bfa_ioc_timer_stop(ioc);
+		bfa_ioc_hw_sem_release(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_getattr);
+		break;
+
+	case IOC_E_HWERROR:
+		bfa_ioc_timer_stop(ioc);
+		/*
+		 * fall through
+		 */
+
+	case IOC_E_TIMEOUT:
+		ioc->retry_count++;
+		if (ioc->retry_count < BFA_IOC_HWINIT_MAX) {
+			bfa_reg_write(ioc->ioc_regs.ioc_fwstate,
+				      BFI_IOC_UNINIT);
+			bfa_fsm_set_state(ioc, bfa_ioc_sm_hwinit);
+			break;
+		}
+
+		bfa_ioc_hw_sem_release(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_ioc_timer_stop(ioc);
+		bfa_ioc_hw_sem_release(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		break;
+
+	case IOC_E_FWREADY:
+		bfa_ioc_send_enable(ioc);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+
+static void
+bfa_ioc_sm_getattr_entry(struct bfa_ioc_s *ioc)
+{
+	bfa_ioc_timer_start(ioc);
+	bfa_ioc_send_getattr(ioc);
+}
+
+/**
+ * IOC configuration in progress. Timer is active.
+ */
+static void
+bfa_ioc_sm_getattr(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_FWRSP_GETATTR:
+		bfa_ioc_timer_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_op);
+		break;
+
+	case IOC_E_HWERROR:
+		bfa_ioc_timer_stop(ioc);
+		/*
+		 * fall through
+		 */
+
+	case IOC_E_TIMEOUT:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_ioc_timer_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+
+static void
+bfa_ioc_sm_op_entry(struct bfa_ioc_s *ioc)
+{
+	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK);
+	bfa_ioc_hb_monitor(ioc);
+	bfa_ioc_aen_post(ioc, BFA_IOC_AEN_ENABLE);
+}
+
+static void
+bfa_ioc_sm_op(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_ENABLE:
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_ioc_hb_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
+		break;
+
+	case IOC_E_HWERROR:
+	case IOC_E_FWREADY:
+		/**
+		 * Hard error or IOC recovery by other function.
+		 * Treat it same as heartbeat failure.
+		 */
+		bfa_ioc_hb_stop(ioc);
+		/*
+		 * !!! fall through !!!
+		 */
+
+	case IOC_E_HBFAIL:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_hbfail);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+
+static void
+bfa_ioc_sm_disabling_entry(struct bfa_ioc_s *ioc)
+{
+	bfa_ioc_aen_post(ioc, BFA_IOC_AEN_DISABLE);
+	bfa_ioc_timer_start(ioc);
+	bfa_ioc_send_disable(ioc);
+}
+
+/**
+ * IOC is being disabled
+ */
+static void
+bfa_ioc_sm_disabling(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_HWERROR:
+	case IOC_E_FWRSP_DISABLE:
+		bfa_ioc_timer_stop(ioc);
+		/*
+		 * !!! fall through !!!
+		 */
+
+	case IOC_E_TIMEOUT:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+/**
+ * IOC disable completion entry.
+ */
+static void
+bfa_ioc_sm_disabled_entry(struct bfa_ioc_s *ioc)
+{
+	bfa_ioc_disable_comp(ioc);
+}
+
+static void
+bfa_ioc_sm_disabled(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_ENABLE:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_semwait);
+		break;
+
+	case IOC_E_DISABLE:
+		ioc->cbfn->disable_cbfn(ioc->bfa);
+		break;
+
+	case IOC_E_FWREADY:
+		break;
+
+	case IOC_E_DETACH:
+		bfa_ioc_firmware_unlock(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+
+static void
+bfa_ioc_sm_initfail_entry(struct bfa_ioc_s *ioc)
+{
+	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+	bfa_ioc_timer_start(ioc);
+}
+
+/**
+ * Hardware initialization failed.
+ */
+static void
+bfa_ioc_sm_initfail(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOC_E_DISABLE:
+		bfa_ioc_timer_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		break;
+
+	case IOC_E_DETACH:
+		bfa_ioc_timer_stop(ioc);
+		bfa_ioc_firmware_unlock(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+		break;
+
+	case IOC_E_TIMEOUT:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_semwait);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+
+static void
+bfa_ioc_sm_hbfail_entry(struct bfa_ioc_s *ioc)
+{
+	struct list_head *qe;
+	struct bfa_ioc_hbfail_notify_s *notify;
+
+	/**
+	 * Mark IOC as failed in hardware and stop firmware.
+	 */
+	bfa_ioc_lpu_stop(ioc);
+	bfa_reg_write(ioc->ioc_regs.ioc_fwstate, BFI_IOC_HBFAIL);
+
+	if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT) {
+		bfa_reg_write(ioc->ioc_regs.ll_halt, __FW_INIT_HALT_P);
+		/*
+		 * Wait for halt to take effect
+		 */
+		bfa_reg_read(ioc->ioc_regs.ll_halt);
+	}
+
+	/**
+	 * Notify driver and common modules registered for notification.
+	 */
+	ioc->cbfn->hbfail_cbfn(ioc->bfa);
+	list_for_each(qe, &ioc->hb_notify_q) {
+		notify = (struct bfa_ioc_hbfail_notify_s *)qe;
+		notify->cbfn(notify->cbarg);
+	}
+
+	/**
+	 * Flush any queued up mailbox requests.
+	 */
+	bfa_ioc_mbox_hbfail(ioc);
+	bfa_ioc_aen_post(ioc, BFA_IOC_AEN_HBFAIL);
+
+	/**
+	 * Trigger auto-recovery after a delay.
+	 */
+	if (ioc->auto_recover) {
+		bfa_timer_begin(ioc->timer_mod, &ioc->ioc_timer,
+				bfa_ioc_timeout, ioc, BFA_IOC_TOV_RECOVER);
+	}
+}
+
+/**
+ * IOC heartbeat failure.
+ */
+static void
+bfa_ioc_sm_hbfail(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+	bfa_trc(ioc, event);
+
+	switch (event) {
+
+	case IOC_E_ENABLE:
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		break;
+
+	case IOC_E_DISABLE:
+		if (ioc->auto_recover)
+			bfa_ioc_timer_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		break;
+
+	case IOC_E_TIMEOUT:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_semwait);
+		break;
+
+	case IOC_E_FWREADY:
+		/**
+		 * Recovery is already initiated by other function.
+		 */
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+
+
+/**
+ *  bfa_ioc_pvt BFA IOC private functions
+ */
+
+static void
+bfa_ioc_disable_comp(struct bfa_ioc_s *ioc)
+{
+	struct list_head *qe;
+	struct bfa_ioc_hbfail_notify_s *notify;
+
+	ioc->cbfn->disable_cbfn(ioc->bfa);
+
+	/**
+	 * Notify common modules registered for notification.
+	 */
+	list_for_each(qe, &ioc->hb_notify_q) {
+		notify = (struct bfa_ioc_hbfail_notify_s *)qe;
+		notify->cbfn(notify->cbarg);
+	}
+}
+
+static void
+bfa_ioc_sem_timeout(void *ioc_arg)
+{
+	struct bfa_ioc_s *ioc = (struct bfa_ioc_s *)ioc_arg;
+
+	bfa_ioc_hw_sem_get(ioc);
+}
+
+static void
+bfa_ioc_usage_sem_get(struct bfa_ioc_s *ioc)
+{
+	u32        r32;
+	int             cnt = 0;
+#define BFA_SEM_SPINCNT	1000
+
+	do {
+		r32 = bfa_reg_read(ioc->ioc_regs.ioc_usage_sem_reg);
+		cnt++;
+		if (cnt > BFA_SEM_SPINCNT)
+			break;
+	} while (r32 != 0);
+	bfa_assert(cnt < BFA_SEM_SPINCNT);
+}
+
+static void
+bfa_ioc_usage_sem_release(struct bfa_ioc_s *ioc)
+{
+	bfa_reg_write(ioc->ioc_regs.ioc_usage_sem_reg, 1);
+}
+
+static void
+bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc)
+{
+	u32        r32;
+
+	/**
+	 * First read to the semaphore register will return 0, subsequent reads
+	 * will return 1. Semaphore is released by writing 0 to the register
+	 */
+	r32 = bfa_reg_read(ioc->ioc_regs.ioc_sem_reg);
+	if (r32 == 0) {
+		bfa_fsm_send_event(ioc, IOC_E_SEMLOCKED);
+		return;
+	}
+
+	bfa_timer_begin(ioc->timer_mod, &ioc->sem_timer, bfa_ioc_sem_timeout,
+			ioc, BFA_IOC_TOV);
+}
+
+static void
+bfa_ioc_hw_sem_release(struct bfa_ioc_s *ioc)
+{
+	bfa_reg_write(ioc->ioc_regs.ioc_sem_reg, 1);
+}
+
+static void
+bfa_ioc_hw_sem_get_cancel(struct bfa_ioc_s *ioc)
+{
+	bfa_timer_stop(&ioc->sem_timer);
+}
+
+/**
+ * Initialize LPU local memory (aka secondary memory / SRAM)
+ */
+static void
+bfa_ioc_lmem_init(struct bfa_ioc_s *ioc)
+{
+	u32        pss_ctl;
+	int             i;
+#define PSS_LMEM_INIT_TIME  10000
+
+	pss_ctl = bfa_reg_read(ioc->ioc_regs.pss_ctl_reg);
+	pss_ctl &= ~__PSS_LMEM_RESET;
+	pss_ctl |= __PSS_LMEM_INIT_EN;
+	pss_ctl |= __PSS_I2C_CLK_DIV(3UL); /* i2c workaround 12.5khz clock */
+	bfa_reg_write(ioc->ioc_regs.pss_ctl_reg, pss_ctl);
+
+	/**
+	 * wait for memory initialization to be complete
+	 */
+	i = 0;
+	do {
+		pss_ctl = bfa_reg_read(ioc->ioc_regs.pss_ctl_reg);
+		i++;
+	} while (!(pss_ctl & __PSS_LMEM_INIT_DONE) && (i < PSS_LMEM_INIT_TIME));
+
+	/**
+	 * If memory initialization is not successful, IOC timeout will catch
+	 * such failures.
+	 */
+	bfa_assert(pss_ctl & __PSS_LMEM_INIT_DONE);
+	bfa_trc(ioc, pss_ctl);
+
+	pss_ctl &= ~(__PSS_LMEM_INIT_DONE | __PSS_LMEM_INIT_EN);
+	bfa_reg_write(ioc->ioc_regs.pss_ctl_reg, pss_ctl);
+}
+
+static void
+bfa_ioc_lpu_start(struct bfa_ioc_s *ioc)
+{
+	u32        pss_ctl;
+
+	/**
+	 * Take processor out of reset.
+	 */
+	pss_ctl = bfa_reg_read(ioc->ioc_regs.pss_ctl_reg);
+	pss_ctl &= ~__PSS_LPU0_RESET;
+
+	bfa_reg_write(ioc->ioc_regs.pss_ctl_reg, pss_ctl);
+}
+
+static void
+bfa_ioc_lpu_stop(struct bfa_ioc_s *ioc)
+{
+	u32        pss_ctl;
+
+	/**
+	 * Put processors in reset.
+	 */
+	pss_ctl = bfa_reg_read(ioc->ioc_regs.pss_ctl_reg);
+	pss_ctl |= (__PSS_LPU0_RESET | __PSS_LPU1_RESET);
+
+	bfa_reg_write(ioc->ioc_regs.pss_ctl_reg, pss_ctl);
+}
+
+/**
+ * Get driver and firmware versions.
+ */
+static void
+bfa_ioc_fwver_get(struct bfa_ioc_s *ioc, struct bfi_ioc_image_hdr_s *fwhdr)
+{
+	u32        pgnum, pgoff;
+	u32        loff = 0;
+	int             i;
+	u32       *fwsig = (u32 *) fwhdr;
+
+	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
+	pgoff = bfa_ioc_smem_pgoff(ioc, loff);
+	bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+
+	for (i = 0; i < (sizeof(struct bfi_ioc_image_hdr_s) / sizeof(u32));
+	     i++) {
+		fwsig[i] = bfa_mem_read(ioc->ioc_regs.smem_page_start, loff);
+		loff += sizeof(u32);
+	}
+}
+
+static u32 *
+bfa_ioc_fwimg_get_chunk(struct bfa_ioc_s *ioc, u32 off)
+{
+	if (ioc->ctdev)
+		return bfi_image_ct_get_chunk(off);
+	return bfi_image_cb_get_chunk(off);
+}
+
+static          u32
+bfa_ioc_fwimg_get_size(struct bfa_ioc_s *ioc)
+{
+return (ioc->ctdev) ? bfi_image_ct_size : bfi_image_cb_size;
+}
+
+/**
+ * Returns TRUE if same.
+ */
+static          bfa_boolean_t
+bfa_ioc_fwver_cmp(struct bfa_ioc_s *ioc, struct bfi_ioc_image_hdr_s *fwhdr)
+{
+	struct bfi_ioc_image_hdr_s *drv_fwhdr;
+	int             i;
+
+	drv_fwhdr =
+		(struct bfi_ioc_image_hdr_s *)bfa_ioc_fwimg_get_chunk(ioc, 0);
+
+	for (i = 0; i < BFI_IOC_MD5SUM_SZ; i++) {
+		if (fwhdr->md5sum[i] != drv_fwhdr->md5sum[i]) {
+			bfa_trc(ioc, i);
+			bfa_trc(ioc, fwhdr->md5sum[i]);
+			bfa_trc(ioc, drv_fwhdr->md5sum[i]);
+			return BFA_FALSE;
+		}
+	}
+
+	bfa_trc(ioc, fwhdr->md5sum[0]);
+	return BFA_TRUE;
+}
+
+/**
+ * Return true if current running version is valid. Firmware signature and
+ * execution context (driver/bios) must match.
+ */
+static          bfa_boolean_t
+bfa_ioc_fwver_valid(struct bfa_ioc_s *ioc)
+{
+	struct bfi_ioc_image_hdr_s fwhdr, *drv_fwhdr;
+
+	/**
+	 * If bios/efi boot (flash based) -- return true
+	 */
+	if (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
+		return BFA_TRUE;
+
+	bfa_ioc_fwver_get(ioc, &fwhdr);
+	drv_fwhdr =
+		(struct bfi_ioc_image_hdr_s *)bfa_ioc_fwimg_get_chunk(ioc, 0);
+
+	if (fwhdr.signature != drv_fwhdr->signature) {
+		bfa_trc(ioc, fwhdr.signature);
+		bfa_trc(ioc, drv_fwhdr->signature);
+		return BFA_FALSE;
+	}
+
+	if (fwhdr.exec != drv_fwhdr->exec) {
+		bfa_trc(ioc, fwhdr.exec);
+		bfa_trc(ioc, drv_fwhdr->exec);
+		return BFA_FALSE;
+	}
+
+	return bfa_ioc_fwver_cmp(ioc, &fwhdr);
+}
+
+/**
+ * Return true if firmware of current driver matches the running firmware.
+ */
+static          bfa_boolean_t
+bfa_ioc_firmware_lock(struct bfa_ioc_s *ioc)
+{
+	enum bfi_ioc_state ioc_fwstate;
+	u32        usecnt;
+	struct bfi_ioc_image_hdr_s fwhdr;
+
+	/**
+	 * Firmware match check is relevant only for CNA.
+	 */
+	if (!ioc->cna)
+		return BFA_TRUE;
+
+	/**
+	 * If bios boot (flash based) -- do not increment usage count
+	 */
+	if (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
+		return BFA_TRUE;
+
+	bfa_ioc_usage_sem_get(ioc);
+	usecnt = bfa_reg_read(ioc->ioc_regs.ioc_usage_reg);
+
+	/**
+	 * If usage count is 0, always return TRUE.
+	 */
+	if (usecnt == 0) {
+		bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, 1);
+		bfa_ioc_usage_sem_release(ioc);
+		bfa_trc(ioc, usecnt);
+		return BFA_TRUE;
+	}
+
+	ioc_fwstate = bfa_reg_read(ioc->ioc_regs.ioc_fwstate);
+	bfa_trc(ioc, ioc_fwstate);
+
+	/**
+	 * Use count cannot be non-zero and chip in uninitialized state.
+	 */
+	bfa_assert(ioc_fwstate != BFI_IOC_UNINIT);
+
+	/**
+	 * Check if another driver with a different firmware is active
+	 */
+	bfa_ioc_fwver_get(ioc, &fwhdr);
+	if (!bfa_ioc_fwver_cmp(ioc, &fwhdr)) {
+		bfa_ioc_usage_sem_release(ioc);
+		bfa_trc(ioc, usecnt);
+		return BFA_FALSE;
+	}
+
+	/**
+	 * Same firmware version. Increment the reference count.
+	 */
+	usecnt++;
+	bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, usecnt);
+	bfa_ioc_usage_sem_release(ioc);
+	bfa_trc(ioc, usecnt);
+	return BFA_TRUE;
+}
+
+static void
+bfa_ioc_firmware_unlock(struct bfa_ioc_s *ioc)
+{
+	u32        usecnt;
+
+	/**
+	 * Firmware lock is relevant only for CNA.
+	 * If bios boot (flash based) -- do not decrement usage count
+	 */
+	if (!ioc->cna || (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ))
+		return;
+
+	/**
+	 * decrement usage count
+	 */
+	bfa_ioc_usage_sem_get(ioc);
+	usecnt = bfa_reg_read(ioc->ioc_regs.ioc_usage_reg);
+	bfa_assert(usecnt > 0);
+
+	usecnt--;
+	bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, usecnt);
+	bfa_trc(ioc, usecnt);
+
+	bfa_ioc_usage_sem_release(ioc);
+}
+
+/**
+ * Conditionally flush any pending message from firmware at start.
+ */
+static void
+bfa_ioc_msgflush(struct bfa_ioc_s *ioc)
+{
+	u32        r32;
+
+	r32 = bfa_reg_read(ioc->ioc_regs.lpu_mbox_cmd);
+	if (r32)
+		bfa_reg_write(ioc->ioc_regs.lpu_mbox_cmd, 1);
+}
+
+
+static void
+bfa_ioc_hwinit(struct bfa_ioc_s *ioc, bfa_boolean_t force)
+{
+	enum bfi_ioc_state ioc_fwstate;
+	bfa_boolean_t   fwvalid;
+
+	ioc_fwstate = bfa_reg_read(ioc->ioc_regs.ioc_fwstate);
+
+	if (force)
+		ioc_fwstate = BFI_IOC_UNINIT;
+
+	bfa_trc(ioc, ioc_fwstate);
+
+	/**
+	 * check if firmware is valid
+	 */
+	fwvalid = (ioc_fwstate == BFI_IOC_UNINIT) ?
+			BFA_FALSE : bfa_ioc_fwver_valid(ioc);
+
+	if (!fwvalid) {
+		bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, ioc->pcidev.device_id);
+		return;
+	}
+
+	/**
+	 * If hardware initialization is in progress (initialized by other IOC),
+	 * just wait for an initialization completion interrupt.
+	 */
+	if (ioc_fwstate == BFI_IOC_INITING) {
+		bfa_trc(ioc, ioc_fwstate);
+		ioc->cbfn->reset_cbfn(ioc->bfa);
+		return;
+	}
+
+	/**
+	 * If IOC function is disabled and firmware version is same,
+	 * just re-enable IOC.
+	 */
+	if (ioc_fwstate == BFI_IOC_DISABLED || ioc_fwstate == BFI_IOC_OP) {
+		bfa_trc(ioc, ioc_fwstate);
+
+		/**
+		 * When using MSI-X any pending firmware ready event should
+		 * be flushed. Otherwise MSI-X interrupts are not delivered.
+		 */
+		bfa_ioc_msgflush(ioc);
+		ioc->cbfn->reset_cbfn(ioc->bfa);
+		bfa_fsm_send_event(ioc, IOC_E_FWREADY);
+		return;
+	}
+
+	/**
+	 * Initialize the h/w for any other states.
+	 */
+	bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, ioc->pcidev.device_id);
+}
+
+static void
+bfa_ioc_timeout(void *ioc_arg)
+{
+	struct bfa_ioc_s *ioc = (struct bfa_ioc_s *)ioc_arg;
+
+	bfa_trc(ioc, 0);
+	bfa_fsm_send_event(ioc, IOC_E_TIMEOUT);
+}
+
+void
+bfa_ioc_mbox_send(struct bfa_ioc_s *ioc, void *ioc_msg, int len)
+{
+	u32       *msgp = (u32 *) ioc_msg;
+	u32        i;
+
+	bfa_trc(ioc, msgp[0]);
+	bfa_trc(ioc, len);
+
+	bfa_assert(len <= BFI_IOC_MSGLEN_MAX);
+
+	/*
+	 * first write msg to mailbox registers
+	 */
+	for (i = 0; i < len / sizeof(u32); i++)
+		bfa_reg_write(ioc->ioc_regs.hfn_mbox + i * sizeof(u32),
+			      bfa_os_wtole(msgp[i]));
+
+	for (; i < BFI_IOC_MSGLEN_MAX / sizeof(u32); i++)
+		bfa_reg_write(ioc->ioc_regs.hfn_mbox + i * sizeof(u32), 0);
+
+	/*
+	 * write 1 to mailbox CMD to trigger LPU event
+	 */
+	bfa_reg_write(ioc->ioc_regs.hfn_mbox_cmd, 1);
+	(void)bfa_reg_read(ioc->ioc_regs.hfn_mbox_cmd);
+}
+
+static void
+bfa_ioc_send_enable(struct bfa_ioc_s *ioc)
+{
+	struct bfi_ioc_ctrl_req_s enable_req;
+
+	bfi_h2i_set(enable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_ENABLE_REQ,
+		    bfa_ioc_portid(ioc));
+	enable_req.ioc_class = ioc->ioc_mc;
+	bfa_ioc_mbox_send(ioc, &enable_req, sizeof(struct bfi_ioc_ctrl_req_s));
+}
+
+static void
+bfa_ioc_send_disable(struct bfa_ioc_s *ioc)
+{
+	struct bfi_ioc_ctrl_req_s disable_req;
+
+	bfi_h2i_set(disable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_DISABLE_REQ,
+		    bfa_ioc_portid(ioc));
+	bfa_ioc_mbox_send(ioc, &disable_req, sizeof(struct bfi_ioc_ctrl_req_s));
+}
+
+static void
+bfa_ioc_send_getattr(struct bfa_ioc_s *ioc)
+{
+	struct bfi_ioc_getattr_req_s attr_req;
+
+	bfi_h2i_set(attr_req.mh, BFI_MC_IOC, BFI_IOC_H2I_GETATTR_REQ,
+		    bfa_ioc_portid(ioc));
+	bfa_dma_be_addr_set(attr_req.attr_addr, ioc->attr_dma.pa);
+	bfa_ioc_mbox_send(ioc, &attr_req, sizeof(attr_req));
+}
+
+static void
+bfa_ioc_hb_check(void *cbarg)
+{
+	struct bfa_ioc_s *ioc = cbarg;
+	u32        hb_count;
+
+	hb_count = bfa_reg_read(ioc->ioc_regs.heartbeat);
+	if (ioc->hb_count == hb_count) {
+		ioc->hb_fail++;
+	} else {
+		ioc->hb_count = hb_count;
+		ioc->hb_fail = 0;
+	}
+
+	if (ioc->hb_fail >= BFA_IOC_HB_FAIL_MAX) {
+		bfa_log(ioc->logm, BFA_LOG_HAL_HEARTBEAT_FAILURE, hb_count);
+		ioc->hb_fail = 0;
+		bfa_ioc_recover(ioc);
+		return;
+	}
+
+	bfa_ioc_mbox_poll(ioc);
+	bfa_timer_begin(ioc->timer_mod, &ioc->ioc_timer, bfa_ioc_hb_check, ioc,
+			BFA_IOC_HB_TOV);
+}
+
+static void
+bfa_ioc_hb_monitor(struct bfa_ioc_s *ioc)
+{
+	ioc->hb_fail = 0;
+	ioc->hb_count = bfa_reg_read(ioc->ioc_regs.heartbeat);
+	bfa_timer_begin(ioc->timer_mod, &ioc->ioc_timer, bfa_ioc_hb_check, ioc,
+			BFA_IOC_HB_TOV);
+}
+
+static void
+bfa_ioc_hb_stop(struct bfa_ioc_s *ioc)
+{
+	bfa_timer_stop(&ioc->ioc_timer);
+}
+
+/**
+ * Host to LPU mailbox message addresses
+ */
+static struct {
+	u32        hfn_mbox, lpu_mbox, hfn_pgn;
+} iocreg_fnreg[] = {
+	{
+	HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0}, {
+	HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1}, {
+	HOSTFN2_LPU_MBOX0_0, LPU_HOSTFN2_MBOX0_0, HOST_PAGE_NUM_FN2}, {
+	HOSTFN3_LPU_MBOX0_8, LPU_HOSTFN3_MBOX0_8, HOST_PAGE_NUM_FN3}
+};
+
+/**
+ * Host <-> LPU mailbox command/status registers - port 0
+ */
+static struct {
+	u32        hfn, lpu;
+} iocreg_mbcmd_p0[] = {
+	{
+	HOSTFN0_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN0_MBOX0_CMD_STAT}, {
+	HOSTFN1_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN1_MBOX0_CMD_STAT}, {
+	HOSTFN2_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN2_MBOX0_CMD_STAT}, {
+	HOSTFN3_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN3_MBOX0_CMD_STAT}
+};
+
+/**
+ * Host <-> LPU mailbox command/status registers - port 1
+ */
+static struct {
+	u32        hfn, lpu;
+} iocreg_mbcmd_p1[] = {
+	{
+	HOSTFN0_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN0_MBOX0_CMD_STAT}, {
+	HOSTFN1_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN1_MBOX0_CMD_STAT}, {
+	HOSTFN2_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN2_MBOX0_CMD_STAT}, {
+	HOSTFN3_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN3_MBOX0_CMD_STAT}
+};
+
+/**
+ * Shared IRQ handling in INTX mode
+ */
+static struct {
+	u32        isr, msk;
+} iocreg_shirq_next[] = {
+	{
+	HOSTFN1_INT_STATUS, HOSTFN1_INT_MSK}, {
+	HOSTFN2_INT_STATUS, HOSTFN2_INT_MSK}, {
+	HOSTFN3_INT_STATUS, HOSTFN3_INT_MSK}, {
+HOSTFN0_INT_STATUS, HOSTFN0_INT_MSK},};
+
+static void
+bfa_ioc_reg_init(struct bfa_ioc_s *ioc)
+{
+	bfa_os_addr_t   rb;
+	int             pcifn = bfa_ioc_pcifn(ioc);
+
+	rb = bfa_ioc_bar0(ioc);
+
+	ioc->ioc_regs.hfn_mbox = rb + iocreg_fnreg[pcifn].hfn_mbox;
+	ioc->ioc_regs.lpu_mbox = rb + iocreg_fnreg[pcifn].lpu_mbox;
+	ioc->ioc_regs.host_page_num_fn = rb + iocreg_fnreg[pcifn].hfn_pgn;
+
+	if (ioc->port_id == 0) {
+		ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
+		ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
+		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].hfn;
+		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].lpu;
+		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
+	} else {
+		ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
+		ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
+		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].hfn;
+		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].lpu;
+		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
+	}
+
+	/**
+	 * Shared IRQ handling in INTX mode
+	 */
+	ioc->ioc_regs.shirq_isr_next = rb + iocreg_shirq_next[pcifn].isr;
+	ioc->ioc_regs.shirq_msk_next = rb + iocreg_shirq_next[pcifn].msk;
+
+	/*
+	 * PSS control registers
+	 */
+	ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
+	ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_425_CTL_REG);
+	ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_312_CTL_REG);
+
+	/*
+	 * IOC semaphore registers and serialization
+	 */
+	ioc->ioc_regs.ioc_sem_reg = (rb + HOST_SEM0_REG);
+	ioc->ioc_regs.ioc_usage_sem_reg = (rb + HOST_SEM1_REG);
+	ioc->ioc_regs.ioc_usage_reg = (rb + BFA_FW_USE_COUNT);
+
+	/**
+	 * sram memory access
+	 */
+	ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START);
+	ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CB;
+	if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT)
+		ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT;
+}
+
+/**
+ *      Initiate a full firmware download.
+ */
+static void
+bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type,
+		    u32 boot_param)
+{
+	u32       *fwimg;
+	u32        pgnum, pgoff;
+	u32        loff = 0;
+	u32        chunkno = 0;
+	u32        i;
+
+	/**
+	 * Initialize LMEM first before code download
+	 */
+	bfa_ioc_lmem_init(ioc);
+
+	/**
+	 * Flash based firmware boot
+	 */
+	bfa_trc(ioc, bfa_ioc_fwimg_get_size(ioc));
+	if (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
+		boot_type = BFI_BOOT_TYPE_FLASH;
+	fwimg = bfa_ioc_fwimg_get_chunk(ioc, chunkno);
+	fwimg[BFI_BOOT_TYPE_OFF / sizeof(u32)] = bfa_os_swap32(boot_type);
+	fwimg[BFI_BOOT_PARAM_OFF / sizeof(u32)] =
+		bfa_os_swap32(boot_param);
+
+	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
+	pgoff = bfa_ioc_smem_pgoff(ioc, loff);
+
+	bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+
+	for (i = 0; i < bfa_ioc_fwimg_get_size(ioc); i++) {
+
+		if (BFA_FLASH_CHUNK_NO(i) != chunkno) {
+			chunkno = BFA_FLASH_CHUNK_NO(i);
+			fwimg = bfa_ioc_fwimg_get_chunk(ioc,
+					BFA_FLASH_CHUNK_ADDR(chunkno));
+		}
+
+		/**
+		 * write smem
+		 */
+		bfa_mem_write(ioc->ioc_regs.smem_page_start, loff,
+			      fwimg[BFA_FLASH_OFFSET_IN_CHUNK(i)]);
+
+		loff += sizeof(u32);
+
+		/**
+		 * handle page offset wrap around
+		 */
+		loff = PSS_SMEM_PGOFF(loff);
+		if (loff == 0) {
+			pgnum++;
+			bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+		}
+	}
+
+	bfa_reg_write(ioc->ioc_regs.host_page_num_fn,
+		      bfa_ioc_smem_pgnum(ioc, 0));
+}
+
+static void
+bfa_ioc_reset(struct bfa_ioc_s *ioc, bfa_boolean_t force)
+{
+	bfa_ioc_hwinit(ioc, force);
+}
+
+/**
+ * Update BFA configuration from firmware configuration.
+ */
+static void
+bfa_ioc_getattr_reply(struct bfa_ioc_s *ioc)
+{
+	struct bfi_ioc_attr_s *attr = ioc->attr;
+
+	attr->adapter_prop = bfa_os_ntohl(attr->adapter_prop);
+	attr->maxfrsize = bfa_os_ntohs(attr->maxfrsize);
+
+	bfa_fsm_send_event(ioc, IOC_E_FWRSP_GETATTR);
+}
+
+/**
+ * Attach time initialization of mbox logic.
+ */
+static void
+bfa_ioc_mbox_attach(struct bfa_ioc_s *ioc)
+{
+	struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+	int             mc;
+
+	INIT_LIST_HEAD(&mod->cmd_q);
+	for (mc = 0; mc < BFI_MC_MAX; mc++) {
+		mod->mbhdlr[mc].cbfn = NULL;
+		mod->mbhdlr[mc].cbarg = ioc->bfa;
+	}
+}
+
+/**
+ * Mbox poll timer -- restarts any pending mailbox requests.
+ */
+static void
+bfa_ioc_mbox_poll(struct bfa_ioc_s *ioc)
+{
+	struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+	struct bfa_mbox_cmd_s *cmd;
+	u32        stat;
+
+	/**
+	 * If no command pending, do nothing
+	 */
+	if (list_empty(&mod->cmd_q))
+		return;
+
+	/**
+	 * If previous command is not yet fetched by firmware, do nothing
+	 */
+	stat = bfa_reg_read(ioc->ioc_regs.hfn_mbox_cmd);
+	if (stat)
+		return;
+
+	/**
+	 * Enqueue command to firmware.
+	 */
+	bfa_q_deq(&mod->cmd_q, &cmd);
+	bfa_ioc_mbox_send(ioc, cmd->msg, sizeof(cmd->msg));
+}
+
+/**
+ * Cleanup any pending requests.
+ */
+static void
+bfa_ioc_mbox_hbfail(struct bfa_ioc_s *ioc)
+{
+	struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+	struct bfa_mbox_cmd_s *cmd;
+
+	while (!list_empty(&mod->cmd_q))
+		bfa_q_deq(&mod->cmd_q, &cmd);
+}
+
+/**
+ * Initialize IOC to port mapping.
+ */
+
+#define FNC_PERS_FN_SHIFT(__fn)	((__fn) * 8)
+static void
+bfa_ioc_map_port(struct bfa_ioc_s *ioc)
+{
+	bfa_os_addr_t   rb = ioc->pcidev.pci_bar_kva;
+	u32        r32;
+
+	/**
+	 * For crossbow, port id is same as pci function.
+	 */
+	if (ioc->pcidev.device_id != BFA_PCI_DEVICE_ID_CT) {
+		ioc->port_id = bfa_ioc_pcifn(ioc);
+		return;
+	}
+
+	/**
+	 * For catapult, base port id on personality register and IOC type
+	 */
+	r32 = bfa_reg_read(rb + FNC_PERS_REG);
+	r32 >>= FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc));
+	ioc->port_id = (r32 & __F0_PORT_MAP_MK) >> __F0_PORT_MAP_SH;
+
+	bfa_trc(ioc, bfa_ioc_pcifn(ioc));
+	bfa_trc(ioc, ioc->port_id);
+}
+
+
+
+/**
+ *  bfa_ioc_public
+ */
+
+/**
+* Set interrupt mode for a function: INTX or MSIX
+ */
+void
+bfa_ioc_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix)
+{
+	bfa_os_addr_t   rb = ioc->pcidev.pci_bar_kva;
+	u32        r32, mode;
+
+	r32 = bfa_reg_read(rb + FNC_PERS_REG);
+	bfa_trc(ioc, r32);
+
+	mode = (r32 >> FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))) &
+		__F0_INTX_STATUS;
+
+	/**
+	 * If already in desired mode, do not change anything
+	 */
+	if (!msix && mode)
+		return;
+
+	if (msix)
+		mode = __F0_INTX_STATUS_MSIX;
+	else
+		mode = __F0_INTX_STATUS_INTA;
+
+	r32 &= ~(__F0_INTX_STATUS << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
+	r32 |= (mode << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
+	bfa_trc(ioc, r32);
+
+	bfa_reg_write(rb + FNC_PERS_REG, r32);
+}
+
+bfa_status_t
+bfa_ioc_pll_init(struct bfa_ioc_s *ioc)
+{
+	bfa_os_addr_t   rb = ioc->pcidev.pci_bar_kva;
+	u32        pll_sclk, pll_fclk, r32;
+
+	if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT) {
+		pll_sclk =
+			__APP_PLL_312_ENABLE | __APP_PLL_312_LRESETN |
+			__APP_PLL_312_RSEL200500 | __APP_PLL_312_P0_1(0U) |
+			__APP_PLL_312_JITLMT0_1(3U) |
+			__APP_PLL_312_CNTLMT0_1(1U);
+		pll_fclk =
+			__APP_PLL_425_ENABLE | __APP_PLL_425_LRESETN |
+			__APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(0U) |
+			__APP_PLL_425_JITLMT0_1(3U) |
+			__APP_PLL_425_CNTLMT0_1(1U);
+
+		/**
+		 * 	For catapult, choose operational mode FC/FCoE
+		 */
+		if (ioc->fcmode) {
+			bfa_reg_write((rb + OP_MODE), 0);
+			bfa_reg_write((rb + ETH_MAC_SER_REG),
+				      __APP_EMS_CMLCKSEL | __APP_EMS_REFCKBUFEN2
+				      | __APP_EMS_CHANNEL_SEL);
+		} else {
+			ioc->pllinit = BFA_TRUE;
+			bfa_reg_write((rb + OP_MODE), __GLOBAL_FCOE_MODE);
+			bfa_reg_write((rb + ETH_MAC_SER_REG),
+				      __APP_EMS_REFCKBUFEN1);
+		}
+	} else {
+		pll_sclk =
+			__APP_PLL_312_ENABLE | __APP_PLL_312_LRESETN |
+			__APP_PLL_312_P0_1(3U) | __APP_PLL_312_JITLMT0_1(3U) |
+			__APP_PLL_312_CNTLMT0_1(3U);
+		pll_fclk =
+			__APP_PLL_425_ENABLE | __APP_PLL_425_LRESETN |
+			__APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(3U) |
+			__APP_PLL_425_JITLMT0_1(3U) |
+			__APP_PLL_425_CNTLMT0_1(3U);
+	}
+
+	bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_UNINIT);
+	bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_UNINIT);
+
+	bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
+
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+		      __APP_PLL_312_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+		      __APP_PLL_312_BYPASS | __APP_PLL_312_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+		      __APP_PLL_425_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+		      __APP_PLL_425_BYPASS | __APP_PLL_425_LOGIC_SOFT_RESET);
+	bfa_os_udelay(2);
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+		      __APP_PLL_312_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+		      __APP_PLL_425_LOGIC_SOFT_RESET);
+
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+		      pll_sclk | __APP_PLL_312_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+		      pll_fclk | __APP_PLL_425_LOGIC_SOFT_RESET);
+
+	/**
+	 * Wait for PLLs to lock.
+	 */
+	bfa_os_udelay(2000);
+	bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
+
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk);
+
+	if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT) {
+		bfa_reg_write((rb + MBIST_CTL_REG), __EDRAM_BISTR_START);
+		bfa_os_udelay(1000);
+		r32 = bfa_reg_read((rb + MBIST_STAT_REG));
+		bfa_trc(ioc, r32);
+	}
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * Interface used by diag module to do firmware boot with memory test
+ * as the entry vector.
+ */
+void
+bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type, u32 boot_param)
+{
+	bfa_os_addr_t   rb;
+
+	bfa_ioc_stats(ioc, ioc_boots);
+
+	if (bfa_ioc_pll_init(ioc) != BFA_STATUS_OK)
+		return;
+
+	/**
+	 * Initialize IOC state of all functions on a chip reset.
+	 */
+	rb = ioc->pcidev.pci_bar_kva;
+	if (boot_param == BFI_BOOT_TYPE_MEMTEST) {
+		bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_MEMTEST);
+		bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_MEMTEST);
+	} else {
+		bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_INITING);
+		bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_INITING);
+	}
+
+	bfa_ioc_download_fw(ioc, boot_type, boot_param);
+
+	/**
+	 * Enable interrupts just before starting LPU
+	 */
+	ioc->cbfn->reset_cbfn(ioc->bfa);
+	bfa_ioc_lpu_start(ioc);
+}
+
+/**
+ * Enable/disable IOC failure auto recovery.
+ */
+void
+bfa_ioc_auto_recover(bfa_boolean_t auto_recover)
+{
+	bfa_auto_recover = BFA_FALSE;
+}
+
+
+bfa_boolean_t
+bfa_ioc_is_operational(struct bfa_ioc_s *ioc)
+{
+	return bfa_fsm_cmp_state(ioc, bfa_ioc_sm_op);
+}
+
+void
+bfa_ioc_msgget(struct bfa_ioc_s *ioc, void *mbmsg)
+{
+	u32       *msgp = mbmsg;
+	u32        r32;
+	int             i;
+
+	/**
+	 * read the MBOX msg
+	 */
+	for (i = 0; i < (sizeof(union bfi_ioc_i2h_msg_u) / sizeof(u32));
+	     i++) {
+		r32 = bfa_reg_read(ioc->ioc_regs.lpu_mbox +
+				   i * sizeof(u32));
+		msgp[i] = bfa_os_htonl(r32);
+	}
+
+	/**
+	 * turn off mailbox interrupt by clearing mailbox status
+	 */
+	bfa_reg_write(ioc->ioc_regs.lpu_mbox_cmd, 1);
+	bfa_reg_read(ioc->ioc_regs.lpu_mbox_cmd);
+}
+
+void
+bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *m)
+{
+	union bfi_ioc_i2h_msg_u *msg;
+
+	msg = (union bfi_ioc_i2h_msg_u *)m;
+
+	bfa_ioc_stats(ioc, ioc_isrs);
+
+	switch (msg->mh.msg_id) {
+	case BFI_IOC_I2H_HBEAT:
+		break;
+
+	case BFI_IOC_I2H_READY_EVENT:
+		bfa_fsm_send_event(ioc, IOC_E_FWREADY);
+		break;
+
+	case BFI_IOC_I2H_ENABLE_REPLY:
+		bfa_fsm_send_event(ioc, IOC_E_FWRSP_ENABLE);
+		break;
+
+	case BFI_IOC_I2H_DISABLE_REPLY:
+		bfa_fsm_send_event(ioc, IOC_E_FWRSP_DISABLE);
+		break;
+
+	case BFI_IOC_I2H_GETATTR_REPLY:
+		bfa_ioc_getattr_reply(ioc);
+		break;
+
+	default:
+		bfa_trc(ioc, msg->mh.msg_id);
+		bfa_assert(0);
+	}
+}
+
+/**
+ * IOC attach time initialization and setup.
+ *
+ * @param[in]	ioc	memory for IOC
+ * @param[in]	bfa	driver instance structure
+ * @param[in]	trcmod	kernel trace module
+ * @param[in]	aen	kernel aen event module
+ * @param[in]	logm	kernel logging module
+ */
+void
+bfa_ioc_attach(struct bfa_ioc_s *ioc, void *bfa, struct bfa_ioc_cbfn_s *cbfn,
+	       struct bfa_timer_mod_s *timer_mod, struct bfa_trc_mod_s *trcmod,
+	       struct bfa_aen_s *aen, struct bfa_log_mod_s *logm)
+{
+	ioc->bfa = bfa;
+	ioc->cbfn = cbfn;
+	ioc->timer_mod = timer_mod;
+	ioc->trcmod = trcmod;
+	ioc->aen = aen;
+	ioc->logm = logm;
+	ioc->fcmode = BFA_FALSE;
+	ioc->pllinit = BFA_FALSE;
+	ioc->dbg_fwsave_once = BFA_TRUE;
+
+	bfa_ioc_mbox_attach(ioc);
+	INIT_LIST_HEAD(&ioc->hb_notify_q);
+
+	bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+}
+
+/**
+ * Driver detach time IOC cleanup.
+ */
+void
+bfa_ioc_detach(struct bfa_ioc_s *ioc)
+{
+	bfa_fsm_send_event(ioc, IOC_E_DETACH);
+}
+
+/**
+ * Setup IOC PCI properties.
+ *
+ * @param[in]	pcidev	PCI device information for this IOC
+ */
+void
+bfa_ioc_pci_init(struct bfa_ioc_s *ioc, struct bfa_pcidev_s *pcidev,
+		 enum bfi_mclass mc)
+{
+	ioc->ioc_mc = mc;
+	ioc->pcidev = *pcidev;
+	ioc->ctdev = (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT);
+	ioc->cna = ioc->ctdev && !ioc->fcmode;
+
+	bfa_ioc_map_port(ioc);
+	bfa_ioc_reg_init(ioc);
+}
+
+/**
+ * Initialize IOC dma memory
+ *
+ * @param[in]	dm_kva	kernel virtual address of IOC dma memory
+ * @param[in]	dm_pa	physical address of IOC dma memory
+ */
+void
+bfa_ioc_mem_claim(struct bfa_ioc_s *ioc, u8 *dm_kva, u64 dm_pa)
+{
+	/**
+	 * dma memory for firmware attribute
+	 */
+	ioc->attr_dma.kva = dm_kva;
+	ioc->attr_dma.pa = dm_pa;
+	ioc->attr = (struct bfi_ioc_attr_s *)dm_kva;
+}
+
+/**
+ * Return size of dma memory required.
+ */
+u32
+bfa_ioc_meminfo(void)
+{
+	return BFA_ROUNDUP(sizeof(struct bfi_ioc_attr_s), BFA_DMA_ALIGN_SZ);
+}
+
+void
+bfa_ioc_enable(struct bfa_ioc_s *ioc)
+{
+	bfa_ioc_stats(ioc, ioc_enables);
+	ioc->dbg_fwsave_once = BFA_TRUE;
+
+	bfa_fsm_send_event(ioc, IOC_E_ENABLE);
+}
+
+void
+bfa_ioc_disable(struct bfa_ioc_s *ioc)
+{
+	bfa_ioc_stats(ioc, ioc_disables);
+	bfa_fsm_send_event(ioc, IOC_E_DISABLE);
+}
+
+/**
+ * Returns memory required for saving firmware trace in case of crash.
+ * Driver must call this interface to allocate memory required for
+ * automatic saving of firmware trace. Driver should call
+ * bfa_ioc_debug_memclaim() right after bfa_ioc_attach() to setup this
+ * trace memory.
+ */
+int
+bfa_ioc_debug_trcsz(bfa_boolean_t auto_recover)
+{
+return (auto_recover) ? BFA_DBG_FWTRC_LEN : 0;
+}
+
+/**
+ * Initialize memory for saving firmware trace. Driver must initialize
+ * trace memory before call bfa_ioc_enable().
+ */
+void
+bfa_ioc_debug_memclaim(struct bfa_ioc_s *ioc, void *dbg_fwsave)
+{
+	bfa_assert(ioc->auto_recover);
+	ioc->dbg_fwsave = dbg_fwsave;
+	ioc->dbg_fwsave_len = bfa_ioc_debug_trcsz(ioc->auto_recover);
+}
+
+u32
+bfa_ioc_smem_pgnum(struct bfa_ioc_s *ioc, u32 fmaddr)
+{
+	return PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, fmaddr);
+}
+
+u32
+bfa_ioc_smem_pgoff(struct bfa_ioc_s *ioc, u32 fmaddr)
+{
+	return PSS_SMEM_PGOFF(fmaddr);
+}
+
+/**
+ * Register mailbox message handler functions
+ *
+ * @param[in]	ioc		IOC instance
+ * @param[in]	mcfuncs		message class handler functions
+ */
+void
+bfa_ioc_mbox_register(struct bfa_ioc_s *ioc, bfa_ioc_mbox_mcfunc_t *mcfuncs)
+{
+	struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+	int             mc;
+
+	for (mc = 0; mc < BFI_MC_MAX; mc++)
+		mod->mbhdlr[mc].cbfn = mcfuncs[mc];
+}
+
+/**
+ * Register mailbox message handler function, to be called by common modules
+ */
+void
+bfa_ioc_mbox_regisr(struct bfa_ioc_s *ioc, enum bfi_mclass mc,
+		    bfa_ioc_mbox_mcfunc_t cbfn, void *cbarg)
+{
+	struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+
+	mod->mbhdlr[mc].cbfn = cbfn;
+	mod->mbhdlr[mc].cbarg = cbarg;
+}
+
+/**
+ * Queue a mailbox command request to firmware. Waits if mailbox is busy.
+ * Responsibility of caller to serialize
+ *
+ * @param[in]	ioc	IOC instance
+ * @param[i]	cmd	Mailbox command
+ */
+void
+bfa_ioc_mbox_queue(struct bfa_ioc_s *ioc, struct bfa_mbox_cmd_s *cmd)
+{
+	struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+	u32        stat;
+
+	/**
+	 * If a previous command is pending, queue new command
+	 */
+	if (!list_empty(&mod->cmd_q)) {
+		list_add_tail(&cmd->qe, &mod->cmd_q);
+		return;
+	}
+
+	/**
+	 * If mailbox is busy, queue command for poll timer
+	 */
+	stat = bfa_reg_read(ioc->ioc_regs.hfn_mbox_cmd);
+	if (stat) {
+		list_add_tail(&cmd->qe, &mod->cmd_q);
+		return;
+	}
+
+	/**
+	 * mailbox is free -- queue command to firmware
+	 */
+	bfa_ioc_mbox_send(ioc, cmd->msg, sizeof(cmd->msg));
+}
+
+/**
+ * Handle mailbox interrupts
+ */
+void
+bfa_ioc_mbox_isr(struct bfa_ioc_s *ioc)
+{
+	struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+	struct bfi_mbmsg_s m;
+	int             mc;
+
+	bfa_ioc_msgget(ioc, &m);
+
+	/**
+	 * Treat IOC message class as special.
+	 */
+	mc = m.mh.msg_class;
+	if (mc == BFI_MC_IOC) {
+		bfa_ioc_isr(ioc, &m);
+		return;
+	}
+
+	if ((mc > BFI_MC_MAX) || (mod->mbhdlr[mc].cbfn == NULL))
+		return;
+
+	mod->mbhdlr[mc].cbfn(mod->mbhdlr[mc].cbarg, &m);
+}
+
+void
+bfa_ioc_error_isr(struct bfa_ioc_s *ioc)
+{
+	bfa_fsm_send_event(ioc, IOC_E_HWERROR);
+}
+
+#ifndef BFA_BIOS_BUILD
+
+/**
+ * return true if IOC is disabled
+ */
+bfa_boolean_t
+bfa_ioc_is_disabled(struct bfa_ioc_s *ioc)
+{
+	return (bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabling)
+		|| bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabled));
+}
+
+/**
+ * return true if IOC firmware is different.
+ */
+bfa_boolean_t
+bfa_ioc_fw_mismatch(struct bfa_ioc_s *ioc)
+{
+	return (bfa_fsm_cmp_state(ioc, bfa_ioc_sm_reset)
+		|| bfa_fsm_cmp_state(ioc, bfa_ioc_sm_fwcheck)
+		|| bfa_fsm_cmp_state(ioc, bfa_ioc_sm_mismatch));
+}
+
+#define bfa_ioc_state_disabled(__sm)		\
+	(((__sm) == BFI_IOC_UNINIT) ||		\
+	 ((__sm) == BFI_IOC_INITING) ||		\
+	 ((__sm) == BFI_IOC_HWINIT) ||		\
+	 ((__sm) == BFI_IOC_DISABLED) ||	\
+	 ((__sm) == BFI_IOC_HBFAIL) ||		\
+	 ((__sm) == BFI_IOC_CFG_DISABLED))
+
+/**
+ * Check if adapter is disabled -- both IOCs should be in a disabled
+ * state.
+ */
+bfa_boolean_t
+bfa_ioc_adapter_is_disabled(struct bfa_ioc_s *ioc)
+{
+	u32        ioc_state;
+	bfa_os_addr_t   rb = ioc->pcidev.pci_bar_kva;
+
+	if (!bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabled))
+		return BFA_FALSE;
+
+	ioc_state = bfa_reg_read(rb + BFA_IOC0_STATE_REG);
+	if (!bfa_ioc_state_disabled(ioc_state))
+		return BFA_FALSE;
+
+	ioc_state = bfa_reg_read(rb + BFA_IOC1_STATE_REG);
+	if (!bfa_ioc_state_disabled(ioc_state))
+		return BFA_FALSE;
+
+	return BFA_TRUE;
+}
+
+/**
+ * Add to IOC heartbeat failure notification queue. To be used by common
+ * modules such as
+ */
+void
+bfa_ioc_hbfail_register(struct bfa_ioc_s *ioc,
+			struct bfa_ioc_hbfail_notify_s *notify)
+{
+	list_add_tail(&notify->qe, &ioc->hb_notify_q);
+}
+
+#define BFA_MFG_NAME "Brocade"
+void
+bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
+			 struct bfa_adapter_attr_s *ad_attr)
+{
+	struct bfi_ioc_attr_s *ioc_attr;
+	char            model[BFA_ADAPTER_MODEL_NAME_LEN];
+
+	ioc_attr = ioc->attr;
+	bfa_os_memcpy((void *)&ad_attr->serial_num,
+		      (void *)ioc_attr->brcd_serialnum,
+		      BFA_ADAPTER_SERIAL_NUM_LEN);
+
+	bfa_os_memcpy(&ad_attr->fw_ver, ioc_attr->fw_version, BFA_VERSION_LEN);
+	bfa_os_memcpy(&ad_attr->optrom_ver, ioc_attr->optrom_version,
+		      BFA_VERSION_LEN);
+	bfa_os_memcpy(&ad_attr->manufacturer, BFA_MFG_NAME,
+		      BFA_ADAPTER_MFG_NAME_LEN);
+	bfa_os_memcpy(&ad_attr->vpd, &ioc_attr->vpd,
+		      sizeof(struct bfa_mfg_vpd_s));
+
+	ad_attr->nports = BFI_ADAPTER_GETP(NPORTS, ioc_attr->adapter_prop);
+	ad_attr->max_speed = BFI_ADAPTER_GETP(SPEED, ioc_attr->adapter_prop);
+
+	/**
+	 * model name
+	 */
+	if (BFI_ADAPTER_GETP(SPEED, ioc_attr->adapter_prop) == 10) {
+		strcpy(model, "BR-10?0");
+		model[5] = '0' + ad_attr->nports;
+	} else {
+		strcpy(model, "Brocade-??5");
+		model[8] =
+			'0' + BFI_ADAPTER_GETP(SPEED, ioc_attr->adapter_prop);
+		model[9] = '0' + ad_attr->nports;
+	}
+
+	if (BFI_ADAPTER_IS_SPECIAL(ioc_attr->adapter_prop))
+		ad_attr->prototype = 1;
+	else
+		ad_attr->prototype = 0;
+
+	bfa_os_memcpy(&ad_attr->model, model, BFA_ADAPTER_MODEL_NAME_LEN);
+	bfa_os_memcpy(&ad_attr->model_descr, &ad_attr->model,
+		      BFA_ADAPTER_MODEL_NAME_LEN);
+
+	ad_attr->pwwn = bfa_ioc_get_pwwn(ioc);
+	ad_attr->mac = bfa_ioc_get_mac(ioc);
+
+	ad_attr->pcie_gen = ioc_attr->pcie_gen;
+	ad_attr->pcie_lanes = ioc_attr->pcie_lanes;
+	ad_attr->pcie_lanes_orig = ioc_attr->pcie_lanes_orig;
+	ad_attr->asic_rev = ioc_attr->asic_rev;
+	ad_attr->hw_ver[0] = 'R';
+	ad_attr->hw_ver[1] = 'e';
+	ad_attr->hw_ver[2] = 'v';
+	ad_attr->hw_ver[3] = '-';
+	ad_attr->hw_ver[4] = ioc_attr->asic_rev;
+	ad_attr->hw_ver[5] = '\0';
+
+	ad_attr->cna_capable = ioc->cna;
+}
+
+void
+bfa_ioc_get_attr(struct bfa_ioc_s *ioc, struct bfa_ioc_attr_s *ioc_attr)
+{
+	bfa_os_memset((void *)ioc_attr, 0, sizeof(struct bfa_ioc_attr_s));
+
+	ioc_attr->state = bfa_sm_to_state(ioc_sm_table, ioc->fsm);
+	ioc_attr->port_id = ioc->port_id;
+
+	if (!ioc->ctdev)
+		ioc_attr->ioc_type = BFA_IOC_TYPE_FC;
+	else if (ioc->ioc_mc == BFI_MC_IOCFC)
+		ioc_attr->ioc_type = BFA_IOC_TYPE_FCoE;
+	else if (ioc->ioc_mc == BFI_MC_LL)
+		ioc_attr->ioc_type = BFA_IOC_TYPE_LL;
+
+	bfa_ioc_get_adapter_attr(ioc, &ioc_attr->adapter_attr);
+
+	ioc_attr->pci_attr.device_id = ioc->pcidev.device_id;
+	ioc_attr->pci_attr.pcifn = ioc->pcidev.pci_func;
+	ioc_attr->pci_attr.chip_rev[0] = 'R';
+	ioc_attr->pci_attr.chip_rev[1] = 'e';
+	ioc_attr->pci_attr.chip_rev[2] = 'v';
+	ioc_attr->pci_attr.chip_rev[3] = '-';
+	ioc_attr->pci_attr.chip_rev[4] = ioc_attr->adapter_attr.asic_rev;
+	ioc_attr->pci_attr.chip_rev[5] = '\0';
+}
+
+/**
+ *  hal_wwn_public
+ */
+wwn_t
+bfa_ioc_get_pwwn(struct bfa_ioc_s *ioc)
+{
+	union {
+		wwn_t           wwn;
+		u8         byte[sizeof(wwn_t)];
+	}
+	w;
+
+	w.wwn = ioc->attr->mfg_wwn;
+
+	if (bfa_ioc_portid(ioc) == 1)
+		w.byte[7]++;
+
+	return w.wwn;
+}
+
+wwn_t
+bfa_ioc_get_nwwn(struct bfa_ioc_s *ioc)
+{
+	union {
+		wwn_t           wwn;
+		u8         byte[sizeof(wwn_t)];
+	}
+	w;
+
+	w.wwn = ioc->attr->mfg_wwn;
+
+	if (bfa_ioc_portid(ioc) == 1)
+		w.byte[7]++;
+
+	w.byte[0] = 0x20;
+
+	return w.wwn;
+}
+
+wwn_t
+bfa_ioc_get_wwn_naa5(struct bfa_ioc_s *ioc, u16 inst)
+{
+	union {
+		wwn_t           wwn;
+		u8         byte[sizeof(wwn_t)];
+	}
+	w              , w5;
+
+	bfa_trc(ioc, inst);
+
+	w.wwn = ioc->attr->mfg_wwn;
+	w5.byte[0] = 0x50 | w.byte[2] >> 4;
+	w5.byte[1] = w.byte[2] << 4 | w.byte[3] >> 4;
+	w5.byte[2] = w.byte[3] << 4 | w.byte[4] >> 4;
+	w5.byte[3] = w.byte[4] << 4 | w.byte[5] >> 4;
+	w5.byte[4] = w.byte[5] << 4 | w.byte[6] >> 4;
+	w5.byte[5] = w.byte[6] << 4 | w.byte[7] >> 4;
+	w5.byte[6] = w.byte[7] << 4 | (inst & 0x0f00) >> 8;
+	w5.byte[7] = (inst & 0xff);
+
+	return w5.wwn;
+}
+
+u64
+bfa_ioc_get_adid(struct bfa_ioc_s *ioc)
+{
+	return ioc->attr->mfg_wwn;
+}
+
+mac_t
+bfa_ioc_get_mac(struct bfa_ioc_s *ioc)
+{
+	mac_t           mac;
+
+	mac = ioc->attr->mfg_mac;
+	mac.mac[MAC_ADDRLEN - 1] += bfa_ioc_pcifn(ioc);
+
+	return mac;
+}
+
+void
+bfa_ioc_set_fcmode(struct bfa_ioc_s *ioc)
+{
+	ioc->fcmode = BFA_TRUE;
+	ioc->port_id = bfa_ioc_pcifn(ioc);
+}
+
+bfa_boolean_t
+bfa_ioc_get_fcmode(struct bfa_ioc_s *ioc)
+{
+	return ioc->fcmode || (ioc->pcidev.device_id != BFA_PCI_DEVICE_ID_CT);
+}
+
+/**
+ * Return true if interrupt should be claimed.
+ */
+bfa_boolean_t
+bfa_ioc_intx_claim(struct bfa_ioc_s *ioc)
+{
+	u32        isr, msk;
+
+	/**
+	 * Always claim if not catapult.
+	 */
+	if (!ioc->ctdev)
+		return BFA_TRUE;
+
+	/**
+	 * FALSE if next device is claiming interrupt.
+	 * TRUE if next device is not interrupting or not present.
+	 */
+	msk = bfa_reg_read(ioc->ioc_regs.shirq_msk_next);
+	isr = bfa_reg_read(ioc->ioc_regs.shirq_isr_next);
+	return !(isr & ~msk);
+}
+
+/**
+ * Send AEN notification
+ */
+static void
+bfa_ioc_aen_post(struct bfa_ioc_s *ioc, enum bfa_ioc_aen_event event)
+{
+	union bfa_aen_data_u aen_data;
+	struct bfa_log_mod_s *logmod = ioc->logm;
+	s32         inst_num = 0;
+	struct bfa_ioc_attr_s ioc_attr;
+
+	switch (event) {
+	case BFA_IOC_AEN_HBGOOD:
+		bfa_log(logmod, BFA_AEN_IOC_HBGOOD, inst_num);
+		break;
+	case BFA_IOC_AEN_HBFAIL:
+		bfa_log(logmod, BFA_AEN_IOC_HBFAIL, inst_num);
+		break;
+	case BFA_IOC_AEN_ENABLE:
+		bfa_log(logmod, BFA_AEN_IOC_ENABLE, inst_num);
+		break;
+	case BFA_IOC_AEN_DISABLE:
+		bfa_log(logmod, BFA_AEN_IOC_DISABLE, inst_num);
+		break;
+	case BFA_IOC_AEN_FWMISMATCH:
+		bfa_log(logmod, BFA_AEN_IOC_FWMISMATCH, inst_num);
+		break;
+	default:
+		break;
+	}
+
+	memset(&aen_data.ioc.pwwn, 0, sizeof(aen_data.ioc.pwwn));
+	memset(&aen_data.ioc.mac, 0, sizeof(aen_data.ioc.mac));
+	bfa_ioc_get_attr(ioc, &ioc_attr);
+	switch (ioc_attr.ioc_type) {
+	case BFA_IOC_TYPE_FC:
+		aen_data.ioc.pwwn = bfa_ioc_get_pwwn(ioc);
+		break;
+	case BFA_IOC_TYPE_FCoE:
+		aen_data.ioc.pwwn = bfa_ioc_get_pwwn(ioc);
+		aen_data.ioc.mac = bfa_ioc_get_mac(ioc);
+		break;
+	case BFA_IOC_TYPE_LL:
+		aen_data.ioc.mac = bfa_ioc_get_mac(ioc);
+		break;
+	default:
+		bfa_assert(ioc_attr.ioc_type == BFA_IOC_TYPE_FC);
+		break;
+	}
+	aen_data.ioc.ioc_type = ioc_attr.ioc_type;
+}
+
+/**
+ * Retrieve saved firmware trace from a prior IOC failure.
+ */
+bfa_status_t
+bfa_ioc_debug_fwsave(struct bfa_ioc_s *ioc, void *trcdata, int *trclen)
+{
+	int             tlen;
+
+	if (ioc->dbg_fwsave_len == 0)
+		return BFA_STATUS_ENOFSAVE;
+
+	tlen = *trclen;
+	if (tlen > ioc->dbg_fwsave_len)
+		tlen = ioc->dbg_fwsave_len;
+
+	bfa_os_memcpy(trcdata, ioc->dbg_fwsave, tlen);
+	*trclen = tlen;
+	return BFA_STATUS_OK;
+}
+
+/**
+ * Retrieve saved firmware trace from a prior IOC failure.
+ */
+bfa_status_t
+bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata, int *trclen)
+{
+	u32        pgnum;
+	u32        loff = BFA_DBG_FWTRC_OFF(bfa_ioc_portid(ioc));
+	int             i, tlen;
+	u32       *tbuf = trcdata, r32;
+
+	bfa_trc(ioc, *trclen);
+
+	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
+	loff = bfa_ioc_smem_pgoff(ioc, loff);
+	bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+
+	tlen = *trclen;
+	if (tlen > BFA_DBG_FWTRC_LEN)
+		tlen = BFA_DBG_FWTRC_LEN;
+	tlen /= sizeof(u32);
+
+	bfa_trc(ioc, tlen);
+
+	for (i = 0; i < tlen; i++) {
+		r32 = bfa_mem_read(ioc->ioc_regs.smem_page_start, loff);
+		tbuf[i] = bfa_os_ntohl(r32);
+		loff += sizeof(u32);
+
+		/**
+		 * handle page offset wrap around
+		 */
+		loff = PSS_SMEM_PGOFF(loff);
+		if (loff == 0) {
+			pgnum++;
+			bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+		}
+	}
+	bfa_reg_write(ioc->ioc_regs.host_page_num_fn,
+		      bfa_ioc_smem_pgnum(ioc, 0));
+	bfa_trc(ioc, pgnum);
+
+	*trclen = tlen * sizeof(u32);
+	return BFA_STATUS_OK;
+}
+
+/**
+ * Save firmware trace if configured.
+ */
+static void
+bfa_ioc_debug_save(struct bfa_ioc_s *ioc)
+{
+	int             tlen;
+
+	if (ioc->dbg_fwsave_len) {
+		tlen = ioc->dbg_fwsave_len;
+		bfa_ioc_debug_fwtrc(ioc, ioc->dbg_fwsave, &tlen);
+	}
+}
+
+/**
+ * Firmware failure detected. Start recovery actions.
+ */
+static void
+bfa_ioc_recover(struct bfa_ioc_s *ioc)
+{
+	if (ioc->dbg_fwsave_once) {
+		ioc->dbg_fwsave_once = BFA_FALSE;
+		bfa_ioc_debug_save(ioc);
+	}
+
+	bfa_ioc_stats(ioc, ioc_hbfails);
+	bfa_fsm_send_event(ioc, IOC_E_HBFAIL);
+}
+
+#else
+
+static void
+bfa_ioc_aen_post(struct bfa_ioc_s *ioc, enum bfa_ioc_aen_event event)
+{
+}
+
+static void
+bfa_ioc_recover(struct bfa_ioc_s *ioc)
+{
+	bfa_assert(0);
+}
+
+#endif
+
+
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
new file mode 100644
index 000000000000..58efd4b13143
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -0,0 +1,259 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_IOC_H__
+#define __BFA_IOC_H__
+
+#include <cs/bfa_sm.h>
+#include <bfi/bfi.h>
+#include <bfi/bfi_ioc.h>
+#include <bfi/bfi_boot.h>
+#include <bfa_timer.h>
+
+/**
+ * PCI device information required by IOC
+ */
+struct bfa_pcidev_s {
+	int             pci_slot;
+	u8         pci_func;
+	u16	device_id;
+	bfa_os_addr_t   pci_bar_kva;
+};
+
+/**
+ * Structure used to remember the DMA-able memory block's KVA and Physical
+ * Address
+ */
+struct bfa_dma_s {
+	void		*kva;	/*! Kernel virtual address	*/
+	u64	pa;	/*! Physical address		*/
+};
+
+#define BFA_DMA_ALIGN_SZ	256
+#define BFA_ROUNDUP(_l, _s)	(((_l) + ((_s) - 1)) & ~((_s) - 1))
+
+
+
+#define bfa_dma_addr_set(dma_addr, pa)	\
+		__bfa_dma_addr_set(&dma_addr, (u64)pa)
+
+static inline void
+__bfa_dma_addr_set(union bfi_addr_u *dma_addr, u64 pa)
+{
+	dma_addr->a32.addr_lo = (u32) pa;
+	dma_addr->a32.addr_hi = (u32) (bfa_os_u32(pa));
+}
+
+
+#define bfa_dma_be_addr_set(dma_addr, pa)	\
+		__bfa_dma_be_addr_set(&dma_addr, (u64)pa)
+static inline void
+__bfa_dma_be_addr_set(union bfi_addr_u *dma_addr, u64 pa)
+{
+	dma_addr->a32.addr_lo = (u32) bfa_os_htonl(pa);
+	dma_addr->a32.addr_hi = (u32) bfa_os_htonl(bfa_os_u32(pa));
+}
+
+struct bfa_ioc_regs_s {
+	bfa_os_addr_t   hfn_mbox_cmd;
+	bfa_os_addr_t   hfn_mbox;
+	bfa_os_addr_t   lpu_mbox_cmd;
+	bfa_os_addr_t   lpu_mbox;
+	bfa_os_addr_t   pss_ctl_reg;
+	bfa_os_addr_t   app_pll_fast_ctl_reg;
+	bfa_os_addr_t   app_pll_slow_ctl_reg;
+	bfa_os_addr_t   ioc_sem_reg;
+	bfa_os_addr_t   ioc_usage_sem_reg;
+	bfa_os_addr_t   ioc_usage_reg;
+	bfa_os_addr_t   host_page_num_fn;
+	bfa_os_addr_t   heartbeat;
+	bfa_os_addr_t   ioc_fwstate;
+	bfa_os_addr_t   ll_halt;
+	bfa_os_addr_t   shirq_isr_next;
+	bfa_os_addr_t   shirq_msk_next;
+	bfa_os_addr_t   smem_page_start;
+	u32	smem_pg0;
+};
+
+#define bfa_reg_read(_raddr)	bfa_os_reg_read(_raddr)
+#define bfa_reg_write(_raddr, _val)	bfa_os_reg_write(_raddr, _val)
+#define bfa_mem_read(_raddr, _off)	bfa_os_mem_read(_raddr, _off)
+#define bfa_mem_write(_raddr, _off, _val)	\
+					bfa_os_mem_write(_raddr, _off, _val)
+/**
+ * IOC Mailbox structures
+ */
+struct bfa_mbox_cmd_s {
+	struct list_head		qe;
+	u32	msg[BFI_IOC_MSGSZ];
+};
+
+/**
+ * IOC mailbox module
+ */
+typedef void (*bfa_ioc_mbox_mcfunc_t)(void *cbarg, struct bfi_mbmsg_s *m);
+struct bfa_ioc_mbox_mod_s {
+	struct list_head	cmd_q;		/*  pending mbox queue	*/
+	int		nmclass;	/*  number of handlers */
+	struct {
+		bfa_ioc_mbox_mcfunc_t	cbfn;	/*  message handlers	*/
+		void			*cbarg;
+	} mbhdlr[BFI_MC_MAX];
+};
+
+/**
+ * IOC callback function interfaces
+ */
+typedef void (*bfa_ioc_enable_cbfn_t)(void *bfa, enum bfa_status status);
+typedef void (*bfa_ioc_disable_cbfn_t)(void *bfa);
+typedef void (*bfa_ioc_hbfail_cbfn_t)(void *bfa);
+typedef void (*bfa_ioc_reset_cbfn_t)(void *bfa);
+struct bfa_ioc_cbfn_s {
+	bfa_ioc_enable_cbfn_t	enable_cbfn;
+	bfa_ioc_disable_cbfn_t	disable_cbfn;
+	bfa_ioc_hbfail_cbfn_t	hbfail_cbfn;
+	bfa_ioc_reset_cbfn_t	reset_cbfn;
+};
+
+/**
+ * Heartbeat failure notification queue element.
+ */
+struct bfa_ioc_hbfail_notify_s {
+	struct list_head		qe;
+	bfa_ioc_hbfail_cbfn_t	cbfn;
+	void			*cbarg;
+};
+
+/**
+ * Initialize a heartbeat failure notification structure
+ */
+#define bfa_ioc_hbfail_init(__notify, __cbfn, __cbarg) do {	\
+	(__notify)->cbfn = (__cbfn);      \
+	(__notify)->cbarg = (__cbarg);      \
+} while (0)
+
+struct bfa_ioc_s {
+	bfa_fsm_t		fsm;
+	struct bfa_s		*bfa;
+	struct bfa_pcidev_s	pcidev;
+	struct bfa_timer_mod_s 	*timer_mod;
+	struct bfa_timer_s 	ioc_timer;
+	struct bfa_timer_s 	sem_timer;
+	u32		hb_count;
+	u32		hb_fail;
+	u32		retry_count;
+	struct list_head		hb_notify_q;
+	void			*dbg_fwsave;
+	int			dbg_fwsave_len;
+	bfa_boolean_t		dbg_fwsave_once;
+	enum bfi_mclass		ioc_mc;
+	struct bfa_ioc_regs_s 	ioc_regs;
+	struct bfa_trc_mod_s	*trcmod;
+	struct bfa_aen_s	*aen;
+	struct bfa_log_mod_s	*logm;
+	struct bfa_ioc_drv_stats_s	stats;
+	bfa_boolean_t		auto_recover;
+	bfa_boolean_t		fcmode;
+	bfa_boolean_t		ctdev;
+	bfa_boolean_t		cna;
+	bfa_boolean_t		pllinit;
+	u8			port_id;
+
+	struct bfa_dma_s	attr_dma;
+	struct bfi_ioc_attr_s	*attr;
+	struct bfa_ioc_cbfn_s	*cbfn;
+	struct bfa_ioc_mbox_mod_s mbox_mod;
+};
+
+#define bfa_ioc_pcifn(__ioc)		(__ioc)->pcidev.pci_func
+#define bfa_ioc_devid(__ioc)		(__ioc)->pcidev.device_id
+#define bfa_ioc_bar0(__ioc)		(__ioc)->pcidev.pci_bar_kva
+#define bfa_ioc_portid(__ioc)		((__ioc)->port_id)
+#define bfa_ioc_fetch_stats(__ioc, __stats) \
+		((__stats)->drv_stats) = (__ioc)->stats
+#define bfa_ioc_clr_stats(__ioc)	\
+		bfa_os_memset(&(__ioc)->stats, 0, sizeof((__ioc)->stats))
+#define bfa_ioc_maxfrsize(__ioc)	(__ioc)->attr->maxfrsize
+#define bfa_ioc_rx_bbcredit(__ioc)	(__ioc)->attr->rx_bbcredit
+#define bfa_ioc_speed_sup(__ioc)	\
+	BFI_ADAPTER_GETP(SPEED, (__ioc)->attr->adapter_prop)
+
+/**
+ * IOC mailbox interface
+ */
+void bfa_ioc_mbox_queue(struct bfa_ioc_s *ioc, struct bfa_mbox_cmd_s *cmd);
+void bfa_ioc_mbox_register(struct bfa_ioc_s *ioc,
+		bfa_ioc_mbox_mcfunc_t *mcfuncs);
+void bfa_ioc_mbox_isr(struct bfa_ioc_s *ioc);
+void bfa_ioc_mbox_send(struct bfa_ioc_s *ioc, void *ioc_msg, int len);
+void bfa_ioc_msgget(struct bfa_ioc_s *ioc, void *mbmsg);
+void bfa_ioc_mbox_regisr(struct bfa_ioc_s *ioc, enum bfi_mclass mc,
+		bfa_ioc_mbox_mcfunc_t cbfn, void *cbarg);
+
+/**
+ * IOC interfaces
+ */
+void bfa_ioc_attach(struct bfa_ioc_s *ioc, void *bfa,
+		struct bfa_ioc_cbfn_s *cbfn, struct bfa_timer_mod_s *timer_mod,
+		struct bfa_trc_mod_s *trcmod,
+		struct bfa_aen_s *aen, struct bfa_log_mod_s *logm);
+void bfa_ioc_detach(struct bfa_ioc_s *ioc);
+void bfa_ioc_pci_init(struct bfa_ioc_s *ioc, struct bfa_pcidev_s *pcidev,
+		enum bfi_mclass mc);
+u32 bfa_ioc_meminfo(void);
+void bfa_ioc_mem_claim(struct bfa_ioc_s *ioc,  u8 *dm_kva, u64 dm_pa);
+void bfa_ioc_enable(struct bfa_ioc_s *ioc);
+void bfa_ioc_disable(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_intx_claim(struct bfa_ioc_s *ioc);
+
+void bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type, u32 boot_param);
+void bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *msg);
+void bfa_ioc_error_isr(struct bfa_ioc_s *ioc);
+void bfa_ioc_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t intx);
+bfa_status_t bfa_ioc_pll_init(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_is_operational(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_is_disabled(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_fw_mismatch(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_adapter_is_disabled(struct bfa_ioc_s *ioc);
+void bfa_ioc_cfg_complete(struct bfa_ioc_s *ioc);
+void bfa_ioc_get_attr(struct bfa_ioc_s *ioc, struct bfa_ioc_attr_s *ioc_attr);
+void bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
+		struct bfa_adapter_attr_s *ad_attr);
+int bfa_ioc_debug_trcsz(bfa_boolean_t auto_recover);
+void bfa_ioc_debug_memclaim(struct bfa_ioc_s *ioc, void *dbg_fwsave);
+bfa_status_t bfa_ioc_debug_fwsave(struct bfa_ioc_s *ioc, void *trcdata,
+		int *trclen);
+bfa_status_t bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata,
+				 int *trclen);
+u32 bfa_ioc_smem_pgnum(struct bfa_ioc_s *ioc, u32 fmaddr);
+u32 bfa_ioc_smem_pgoff(struct bfa_ioc_s *ioc, u32 fmaddr);
+void bfa_ioc_set_fcmode(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_get_fcmode(struct bfa_ioc_s *ioc);
+void bfa_ioc_hbfail_register(struct bfa_ioc_s *ioc,
+	struct bfa_ioc_hbfail_notify_s *notify);
+
+/*
+ * bfa mfg wwn API functions
+ */
+wwn_t bfa_ioc_get_pwwn(struct bfa_ioc_s *ioc);
+wwn_t bfa_ioc_get_nwwn(struct bfa_ioc_s *ioc);
+wwn_t bfa_ioc_get_wwn_naa5(struct bfa_ioc_s *ioc, u16 inst);
+mac_t bfa_ioc_get_mac(struct bfa_ioc_s *ioc);
+u64 bfa_ioc_get_adid(struct bfa_ioc_s *ioc);
+
+#endif /* __BFA_IOC_H__ */
+
diff --git a/drivers/scsi/bfa/bfa_iocfc.c b/drivers/scsi/bfa/bfa_iocfc.c
new file mode 100644
index 000000000000..12350b022d63
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_iocfc.c
@@ -0,0 +1,872 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <cs/bfa_debug.h>
+#include <bfa_priv.h>
+#include <log/bfa_log_hal.h>
+#include <bfi/bfi_boot.h>
+#include <bfi/bfi_cbreg.h>
+#include <aen/bfa_aen_ioc.h>
+#include <defs/bfa_defs_iocfc.h>
+#include <defs/bfa_defs_pci.h>
+#include "bfa_callback_priv.h"
+#include "bfad_drv.h"
+
+BFA_TRC_FILE(HAL, IOCFC);
+
+/**
+ * IOC local definitions
+ */
+#define BFA_IOCFC_TOV		5000	/* msecs */
+
+enum {
+	BFA_IOCFC_ACT_NONE	= 0,
+	BFA_IOCFC_ACT_INIT	= 1,
+	BFA_IOCFC_ACT_STOP	= 2,
+	BFA_IOCFC_ACT_DISABLE	= 3,
+};
+
+/*
+ * forward declarations
+ */
+static void bfa_iocfc_enable_cbfn(void *bfa_arg, enum bfa_status status);
+static void bfa_iocfc_disable_cbfn(void *bfa_arg);
+static void bfa_iocfc_hbfail_cbfn(void *bfa_arg);
+static void bfa_iocfc_reset_cbfn(void *bfa_arg);
+static void bfa_iocfc_stats_clear(void *bfa_arg);
+static void bfa_iocfc_stats_swap(struct bfa_fw_stats_s *d,
+			struct bfa_fw_stats_s *s);
+static void bfa_iocfc_stats_clr_cb(void *bfa_arg, bfa_boolean_t complete);
+static void bfa_iocfc_stats_clr_timeout(void *bfa_arg);
+static void bfa_iocfc_stats_cb(void *bfa_arg, bfa_boolean_t complete);
+static void bfa_iocfc_stats_timeout(void *bfa_arg);
+
+static struct bfa_ioc_cbfn_s bfa_iocfc_cbfn;
+
+/**
+ *  bfa_ioc_pvt BFA IOC private functions
+ */
+
+static void
+bfa_iocfc_cqs_sz(struct bfa_iocfc_cfg_s *cfg, u32 *dm_len)
+{
+	int             i, per_reqq_sz, per_rspq_sz;
+
+	per_reqq_sz = BFA_ROUNDUP((cfg->drvcfg.num_reqq_elems * BFI_LMSG_SZ),
+							BFA_DMA_ALIGN_SZ);
+	per_rspq_sz = BFA_ROUNDUP((cfg->drvcfg.num_rspq_elems * BFI_LMSG_SZ),
+							BFA_DMA_ALIGN_SZ);
+
+	/*
+	 * Calculate CQ size
+	 */
+	for (i = 0; i < cfg->fwcfg.num_cqs; i++) {
+		*dm_len = *dm_len + per_reqq_sz;
+		*dm_len = *dm_len + per_rspq_sz;
+	}
+
+	/*
+	 * Calculate Shadow CI/PI size
+	 */
+	for (i = 0; i < cfg->fwcfg.num_cqs; i++)
+		*dm_len += (2 * BFA_CACHELINE_SZ);
+}
+
+static void
+bfa_iocfc_fw_cfg_sz(struct bfa_iocfc_cfg_s *cfg, u32 *dm_len)
+{
+	*dm_len +=
+		BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfg_s), BFA_CACHELINE_SZ);
+	*dm_len +=
+		BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfgrsp_s),
+			    BFA_CACHELINE_SZ);
+	*dm_len += BFA_ROUNDUP(sizeof(struct bfa_fw_stats_s), BFA_CACHELINE_SZ);
+}
+
+/**
+ * Use the Mailbox interface to send BFI_IOCFC_H2I_CFG_REQ
+ */
+static void
+bfa_iocfc_send_cfg(void *bfa_arg)
+{
+	struct bfa_s *bfa = bfa_arg;
+	struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+	struct bfi_iocfc_cfg_req_s cfg_req;
+	struct bfi_iocfc_cfg_s *cfg_info = iocfc->cfginfo;
+	struct bfa_iocfc_cfg_s  *cfg = &iocfc->cfg;
+	int             i;
+
+	bfa_assert(cfg->fwcfg.num_cqs <= BFI_IOC_MAX_CQS);
+	bfa_trc(bfa, cfg->fwcfg.num_cqs);
+
+	iocfc->cfgdone = BFA_FALSE;
+	bfa_iocfc_reset_queues(bfa);
+
+	/**
+	 * initialize IOC configuration info
+	 */
+	cfg_info->endian_sig = BFI_IOC_ENDIAN_SIG;
+	cfg_info->num_cqs = cfg->fwcfg.num_cqs;
+
+	bfa_dma_be_addr_set(cfg_info->cfgrsp_addr, iocfc->cfgrsp_dma.pa);
+	bfa_dma_be_addr_set(cfg_info->stats_addr, iocfc->stats_pa);
+
+	/**
+	 * dma map REQ and RSP circular queues and shadow pointers
+	 */
+	for (i = 0; i < cfg->fwcfg.num_cqs; i++) {
+		bfa_dma_be_addr_set(cfg_info->req_cq_ba[i],
+				       iocfc->req_cq_ba[i].pa);
+		bfa_dma_be_addr_set(cfg_info->req_shadow_ci[i],
+				       iocfc->req_cq_shadow_ci[i].pa);
+		cfg_info->req_cq_elems[i] =
+			bfa_os_htons(cfg->drvcfg.num_reqq_elems);
+
+		bfa_dma_be_addr_set(cfg_info->rsp_cq_ba[i],
+				       iocfc->rsp_cq_ba[i].pa);
+		bfa_dma_be_addr_set(cfg_info->rsp_shadow_pi[i],
+				       iocfc->rsp_cq_shadow_pi[i].pa);
+		cfg_info->rsp_cq_elems[i] =
+			bfa_os_htons(cfg->drvcfg.num_rspq_elems);
+	}
+
+	/**
+	 * dma map IOC configuration itself
+	 */
+	bfi_h2i_set(cfg_req.mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_CFG_REQ,
+			bfa_lpuid(bfa));
+	bfa_dma_be_addr_set(cfg_req.ioc_cfg_dma_addr, iocfc->cfg_info.pa);
+
+	bfa_ioc_mbox_send(&bfa->ioc, &cfg_req,
+			sizeof(struct bfi_iocfc_cfg_req_s));
+}
+
+static void
+bfa_iocfc_init_mem(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+		    struct bfa_pcidev_s *pcidev)
+{
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+
+	bfa->bfad = bfad;
+	iocfc->bfa = bfa;
+	iocfc->action = BFA_IOCFC_ACT_NONE;
+
+	bfa_os_assign(iocfc->cfg, *cfg);
+
+	/**
+	 * Initialize chip specific handlers.
+	 */
+	if (bfa_ioc_devid(&bfa->ioc) == BFA_PCI_DEVICE_ID_CT) {
+		iocfc->hwif.hw_reginit = bfa_hwct_reginit;
+		iocfc->hwif.hw_rspq_ack = bfa_hwct_rspq_ack;
+		iocfc->hwif.hw_msix_init = bfa_hwct_msix_init;
+		iocfc->hwif.hw_msix_install = bfa_hwct_msix_install;
+		iocfc->hwif.hw_msix_uninstall = bfa_hwct_msix_uninstall;
+		iocfc->hwif.hw_isr_mode_set = bfa_hwct_isr_mode_set;
+		iocfc->hwif.hw_msix_getvecs = bfa_hwct_msix_getvecs;
+	} else {
+		iocfc->hwif.hw_reginit = bfa_hwcb_reginit;
+		iocfc->hwif.hw_rspq_ack = bfa_hwcb_rspq_ack;
+		iocfc->hwif.hw_msix_init = bfa_hwcb_msix_init;
+		iocfc->hwif.hw_msix_install = bfa_hwcb_msix_install;
+		iocfc->hwif.hw_msix_uninstall = bfa_hwcb_msix_uninstall;
+		iocfc->hwif.hw_isr_mode_set = bfa_hwcb_isr_mode_set;
+		iocfc->hwif.hw_msix_getvecs = bfa_hwcb_msix_getvecs;
+	}
+
+	iocfc->hwif.hw_reginit(bfa);
+	bfa->msix.nvecs = 0;
+}
+
+static void
+bfa_iocfc_mem_claim(struct bfa_s *bfa, struct bfa_iocfc_cfg_s *cfg,
+		      struct bfa_meminfo_s *meminfo)
+{
+	u8        *dm_kva;
+	u64        dm_pa;
+	int             i, per_reqq_sz, per_rspq_sz;
+	struct bfa_iocfc_s  *iocfc = &bfa->iocfc;
+	int		dbgsz;
+
+	dm_kva = bfa_meminfo_dma_virt(meminfo);
+	dm_pa = bfa_meminfo_dma_phys(meminfo);
+
+	/*
+	 * First allocate dma memory for IOC.
+	 */
+	bfa_ioc_mem_claim(&bfa->ioc, dm_kva, dm_pa);
+	dm_kva += bfa_ioc_meminfo();
+	dm_pa  += bfa_ioc_meminfo();
+
+	/*
+	 * Claim DMA-able memory for the request/response queues and for shadow
+	 * ci/pi registers
+	 */
+	per_reqq_sz = BFA_ROUNDUP((cfg->drvcfg.num_reqq_elems * BFI_LMSG_SZ),
+							BFA_DMA_ALIGN_SZ);
+	per_rspq_sz = BFA_ROUNDUP((cfg->drvcfg.num_rspq_elems * BFI_LMSG_SZ),
+							BFA_DMA_ALIGN_SZ);
+
+	for (i = 0; i < cfg->fwcfg.num_cqs; i++) {
+		iocfc->req_cq_ba[i].kva = dm_kva;
+		iocfc->req_cq_ba[i].pa = dm_pa;
+		bfa_os_memset(dm_kva, 0, per_reqq_sz);
+		dm_kva += per_reqq_sz;
+		dm_pa += per_reqq_sz;
+
+		iocfc->rsp_cq_ba[i].kva = dm_kva;
+		iocfc->rsp_cq_ba[i].pa = dm_pa;
+		bfa_os_memset(dm_kva, 0, per_rspq_sz);
+		dm_kva += per_rspq_sz;
+		dm_pa += per_rspq_sz;
+	}
+
+	for (i = 0; i < cfg->fwcfg.num_cqs; i++) {
+		iocfc->req_cq_shadow_ci[i].kva = dm_kva;
+		iocfc->req_cq_shadow_ci[i].pa = dm_pa;
+		dm_kva += BFA_CACHELINE_SZ;
+		dm_pa += BFA_CACHELINE_SZ;
+
+		iocfc->rsp_cq_shadow_pi[i].kva = dm_kva;
+		iocfc->rsp_cq_shadow_pi[i].pa = dm_pa;
+		dm_kva += BFA_CACHELINE_SZ;
+		dm_pa += BFA_CACHELINE_SZ;
+	}
+
+	/*
+	 * Claim DMA-able memory for the config info page
+	 */
+	bfa->iocfc.cfg_info.kva = dm_kva;
+	bfa->iocfc.cfg_info.pa = dm_pa;
+	bfa->iocfc.cfginfo = (struct bfi_iocfc_cfg_s *) dm_kva;
+	dm_kva += BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfg_s), BFA_CACHELINE_SZ);
+	dm_pa += BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfg_s), BFA_CACHELINE_SZ);
+
+	/*
+	 * Claim DMA-able memory for the config response
+	 */
+	bfa->iocfc.cfgrsp_dma.kva = dm_kva;
+	bfa->iocfc.cfgrsp_dma.pa = dm_pa;
+	bfa->iocfc.cfgrsp = (struct bfi_iocfc_cfgrsp_s *) dm_kva;
+
+	dm_kva +=
+		BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfgrsp_s),
+			    BFA_CACHELINE_SZ);
+	dm_pa += BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfgrsp_s),
+			     BFA_CACHELINE_SZ);
+
+	/*
+	 * Claim DMA-able memory for iocfc stats
+	 */
+	bfa->iocfc.stats_kva = dm_kva;
+	bfa->iocfc.stats_pa = dm_pa;
+	bfa->iocfc.fw_stats = (struct bfa_fw_stats_s *) dm_kva;
+	dm_kva += BFA_ROUNDUP(sizeof(struct bfa_fw_stats_s), BFA_CACHELINE_SZ);
+	dm_pa += BFA_ROUNDUP(sizeof(struct bfa_fw_stats_s), BFA_CACHELINE_SZ);
+
+	bfa_meminfo_dma_virt(meminfo) = dm_kva;
+	bfa_meminfo_dma_phys(meminfo) = dm_pa;
+
+	dbgsz = bfa_ioc_debug_trcsz(bfa_auto_recover);
+	if (dbgsz > 0) {
+		bfa_ioc_debug_memclaim(&bfa->ioc, bfa_meminfo_kva(meminfo));
+		bfa_meminfo_kva(meminfo) += dbgsz;
+	}
+}
+
+/**
+ * BFA submodules initialization completion notification.
+ */
+static void
+bfa_iocfc_initdone_submod(struct bfa_s *bfa)
+{
+	int             i;
+
+	for (i = 0; hal_mods[i]; i++)
+		hal_mods[i]->initdone(bfa);
+}
+
+/**
+ * Start BFA submodules.
+ */
+static void
+bfa_iocfc_start_submod(struct bfa_s *bfa)
+{
+	int             i;
+
+	bfa->rme_process = BFA_TRUE;
+
+	for (i = 0; hal_mods[i]; i++)
+		hal_mods[i]->start(bfa);
+}
+
+/**
+ * Disable BFA submodules.
+ */
+static void
+bfa_iocfc_disable_submod(struct bfa_s *bfa)
+{
+	int             i;
+
+	for (i = 0; hal_mods[i]; i++)
+		hal_mods[i]->iocdisable(bfa);
+}
+
+static void
+bfa_iocfc_init_cb(void *bfa_arg, bfa_boolean_t complete)
+{
+	struct bfa_s	*bfa = bfa_arg;
+
+	if (complete) {
+		if (bfa->iocfc.cfgdone)
+			bfa_cb_init(bfa->bfad, BFA_STATUS_OK);
+		else
+			bfa_cb_init(bfa->bfad, BFA_STATUS_FAILED);
+	} else
+		bfa->iocfc.action = BFA_IOCFC_ACT_NONE;
+}
+
+static void
+bfa_iocfc_stop_cb(void *bfa_arg, bfa_boolean_t compl)
+{
+	struct bfa_s  *bfa = bfa_arg;
+	struct bfad_s *bfad = bfa->bfad;
+
+	if (compl)
+		complete(&bfad->comp);
+
+	else
+		bfa->iocfc.action = BFA_IOCFC_ACT_NONE;
+}
+
+static void
+bfa_iocfc_disable_cb(void *bfa_arg, bfa_boolean_t compl)
+{
+	struct bfa_s  *bfa = bfa_arg;
+	struct bfad_s *bfad = bfa->bfad;
+
+	if (compl)
+		complete(&bfad->disable_comp);
+}
+
+/**
+ * Update BFA configuration from firmware configuration.
+ */
+static void
+bfa_iocfc_cfgrsp(struct bfa_s *bfa)
+{
+	struct bfa_iocfc_s		*iocfc	 = &bfa->iocfc;
+	struct bfi_iocfc_cfgrsp_s	*cfgrsp  = iocfc->cfgrsp;
+	struct bfa_iocfc_fwcfg_s	*fwcfg   = &cfgrsp->fwcfg;
+	struct bfi_iocfc_cfg_s 		*cfginfo = iocfc->cfginfo;
+
+	fwcfg->num_cqs        = fwcfg->num_cqs;
+	fwcfg->num_ioim_reqs  = bfa_os_ntohs(fwcfg->num_ioim_reqs);
+	fwcfg->num_tskim_reqs = bfa_os_ntohs(fwcfg->num_tskim_reqs);
+	fwcfg->num_fcxp_reqs  = bfa_os_ntohs(fwcfg->num_fcxp_reqs);
+	fwcfg->num_uf_bufs    = bfa_os_ntohs(fwcfg->num_uf_bufs);
+	fwcfg->num_rports     = bfa_os_ntohs(fwcfg->num_rports);
+
+	cfginfo->intr_attr.coalesce = cfgrsp->intr_attr.coalesce;
+	cfginfo->intr_attr.delay    = bfa_os_ntohs(cfgrsp->intr_attr.delay);
+	cfginfo->intr_attr.latency  = bfa_os_ntohs(cfgrsp->intr_attr.latency);
+
+	iocfc->cfgdone = BFA_TRUE;
+
+	/**
+	 * Configuration is complete - initialize/start submodules
+	 */
+	if (iocfc->action == BFA_IOCFC_ACT_INIT)
+		bfa_cb_queue(bfa, &iocfc->init_hcb_qe, bfa_iocfc_init_cb, bfa);
+	else
+		bfa_iocfc_start_submod(bfa);
+}
+
+static void
+bfa_iocfc_stats_clear(void *bfa_arg)
+{
+	struct bfa_s		*bfa = bfa_arg;
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+	struct bfi_iocfc_stats_req_s stats_req;
+
+	bfa_timer_start(bfa, &iocfc->stats_timer,
+			    bfa_iocfc_stats_clr_timeout, bfa,
+			    BFA_IOCFC_TOV);
+
+	bfi_h2i_set(stats_req.mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_CLEAR_STATS_REQ,
+		bfa_lpuid(bfa));
+	bfa_ioc_mbox_send(&bfa->ioc, &stats_req,
+		sizeof(struct bfi_iocfc_stats_req_s));
+}
+
+static void
+bfa_iocfc_stats_swap(struct bfa_fw_stats_s *d, struct bfa_fw_stats_s *s)
+{
+	u32       *dip = (u32 *) d;
+	u32       *sip = (u32 *) s;
+	int             i;
+
+	for (i = 0; i < (sizeof(struct bfa_fw_stats_s) / sizeof(u32)); i++)
+		dip[i] = bfa_os_ntohl(sip[i]);
+}
+
+static void
+bfa_iocfc_stats_clr_cb(void *bfa_arg, bfa_boolean_t complete)
+{
+	struct bfa_s *bfa = bfa_arg;
+	struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+	if (complete) {
+		bfa_ioc_clr_stats(&bfa->ioc);
+		iocfc->stats_cbfn(iocfc->stats_cbarg, iocfc->stats_status);
+	} else {
+		iocfc->stats_busy = BFA_FALSE;
+		iocfc->stats_status = BFA_STATUS_OK;
+	}
+}
+
+static void
+bfa_iocfc_stats_clr_timeout(void *bfa_arg)
+{
+	struct bfa_s		*bfa = bfa_arg;
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+
+	bfa_trc(bfa, 0);
+
+	iocfc->stats_status = BFA_STATUS_ETIMER;
+	bfa_cb_queue(bfa, &iocfc->stats_hcb_qe, bfa_iocfc_stats_clr_cb, bfa);
+}
+
+static void
+bfa_iocfc_stats_cb(void *bfa_arg, bfa_boolean_t complete)
+{
+	struct bfa_s		*bfa = bfa_arg;
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+
+	if (complete) {
+		if (iocfc->stats_status == BFA_STATUS_OK) {
+			bfa_os_memset(iocfc->stats_ret, 0,
+				sizeof(*iocfc->stats_ret));
+			bfa_iocfc_stats_swap(&iocfc->stats_ret->fw_stats,
+				iocfc->fw_stats);
+		}
+		iocfc->stats_cbfn(iocfc->stats_cbarg, iocfc->stats_status);
+	} else {
+		iocfc->stats_busy = BFA_FALSE;
+		iocfc->stats_status = BFA_STATUS_OK;
+	}
+}
+
+static void
+bfa_iocfc_stats_timeout(void *bfa_arg)
+{
+	struct bfa_s		*bfa = bfa_arg;
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+
+	bfa_trc(bfa, 0);
+
+	iocfc->stats_status = BFA_STATUS_ETIMER;
+	bfa_cb_queue(bfa, &iocfc->stats_hcb_qe, bfa_iocfc_stats_cb, bfa);
+}
+
+static void
+bfa_iocfc_stats_query(struct bfa_s *bfa)
+{
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+	struct bfi_iocfc_stats_req_s stats_req;
+
+	bfa_timer_start(bfa, &iocfc->stats_timer,
+			    bfa_iocfc_stats_timeout, bfa, BFA_IOCFC_TOV);
+
+	bfi_h2i_set(stats_req.mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_GET_STATS_REQ,
+			bfa_lpuid(bfa));
+	bfa_ioc_mbox_send(&bfa->ioc, &stats_req,
+		sizeof(struct bfi_iocfc_stats_req_s));
+}
+
+void
+bfa_iocfc_reset_queues(struct bfa_s *bfa)
+{
+	int             q;
+
+	for (q = 0; q < BFI_IOC_MAX_CQS; q++) {
+		bfa_reqq_ci(bfa, q) = 0;
+		bfa_reqq_pi(bfa, q) = 0;
+		bfa_rspq_ci(bfa, q) = 0;
+		bfa_rspq_pi(bfa, q) = 0;
+	}
+}
+
+/**
+ * IOC enable request is complete
+ */
+static void
+bfa_iocfc_enable_cbfn(void *bfa_arg, enum bfa_status status)
+{
+	struct bfa_s	*bfa = bfa_arg;
+
+	if (status != BFA_STATUS_OK) {
+		bfa_isr_disable(bfa);
+		if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT)
+			bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe,
+				     bfa_iocfc_init_cb, bfa);
+		return;
+	}
+
+	bfa_iocfc_initdone_submod(bfa);
+	bfa_iocfc_send_cfg(bfa);
+}
+
+/**
+ * IOC disable request is complete
+ */
+static void
+bfa_iocfc_disable_cbfn(void *bfa_arg)
+{
+	struct bfa_s	*bfa = bfa_arg;
+
+	bfa_isr_disable(bfa);
+	bfa_iocfc_disable_submod(bfa);
+
+	if (bfa->iocfc.action == BFA_IOCFC_ACT_STOP)
+		bfa_cb_queue(bfa, &bfa->iocfc.stop_hcb_qe, bfa_iocfc_stop_cb,
+			     bfa);
+	else {
+		bfa_assert(bfa->iocfc.action == BFA_IOCFC_ACT_DISABLE);
+		bfa_cb_queue(bfa, &bfa->iocfc.dis_hcb_qe, bfa_iocfc_disable_cb,
+			     bfa);
+	}
+}
+
+/**
+ * Notify sub-modules of hardware failure.
+ */
+static void
+bfa_iocfc_hbfail_cbfn(void *bfa_arg)
+{
+	struct bfa_s	*bfa = bfa_arg;
+
+	bfa->rme_process = BFA_FALSE;
+
+	bfa_isr_disable(bfa);
+	bfa_iocfc_disable_submod(bfa);
+
+	if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT)
+		bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, bfa_iocfc_init_cb,
+			     bfa);
+}
+
+/**
+ * Actions on chip-reset completion.
+ */
+static void
+bfa_iocfc_reset_cbfn(void *bfa_arg)
+{
+	struct bfa_s	*bfa = bfa_arg;
+
+	bfa_iocfc_reset_queues(bfa);
+	bfa_isr_enable(bfa);
+}
+
+
+
+/**
+ *  bfa_ioc_public
+ */
+
+/**
+ * Query IOC memory requirement information.
+ */
+void
+bfa_iocfc_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+		u32 *dm_len)
+{
+	/* dma memory for IOC */
+	*dm_len += bfa_ioc_meminfo();
+
+	bfa_iocfc_fw_cfg_sz(cfg, dm_len);
+	bfa_iocfc_cqs_sz(cfg, dm_len);
+	*km_len += bfa_ioc_debug_trcsz(bfa_auto_recover);
+}
+
+/**
+ * Query IOC memory requirement information.
+ */
+void
+bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+		   struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+	int             i;
+
+	bfa_iocfc_cbfn.enable_cbfn = bfa_iocfc_enable_cbfn;
+	bfa_iocfc_cbfn.disable_cbfn = bfa_iocfc_disable_cbfn;
+	bfa_iocfc_cbfn.hbfail_cbfn = bfa_iocfc_hbfail_cbfn;
+	bfa_iocfc_cbfn.reset_cbfn = bfa_iocfc_reset_cbfn;
+
+	bfa_ioc_attach(&bfa->ioc, bfa, &bfa_iocfc_cbfn, &bfa->timer_mod,
+		bfa->trcmod, bfa->aen, bfa->logm);
+	bfa_ioc_pci_init(&bfa->ioc, pcidev, BFI_MC_IOCFC);
+	bfa_ioc_mbox_register(&bfa->ioc, bfa_mbox_isrs);
+
+	/**
+	 * Choose FC (ssid: 0x1C) v/s FCoE (ssid: 0x14) mode.
+	 */
+	if (0)
+		bfa_ioc_set_fcmode(&bfa->ioc);
+
+	bfa_iocfc_init_mem(bfa, bfad, cfg, pcidev);
+	bfa_iocfc_mem_claim(bfa, cfg, meminfo);
+	bfa_timer_init(&bfa->timer_mod);
+
+	INIT_LIST_HEAD(&bfa->comp_q);
+	for (i = 0; i < BFI_IOC_MAX_CQS; i++)
+		INIT_LIST_HEAD(&bfa->reqq_waitq[i]);
+}
+
+/**
+ * Query IOC memory requirement information.
+ */
+void
+bfa_iocfc_detach(struct bfa_s *bfa)
+{
+	bfa_ioc_detach(&bfa->ioc);
+}
+
+/**
+ * Query IOC memory requirement information.
+ */
+void
+bfa_iocfc_init(struct bfa_s *bfa)
+{
+	bfa->iocfc.action = BFA_IOCFC_ACT_INIT;
+	bfa_ioc_enable(&bfa->ioc);
+	bfa_msix_install(bfa);
+}
+
+/**
+ * IOC start called from bfa_start(). Called to start IOC operations
+ * at driver instantiation for this instance.
+ */
+void
+bfa_iocfc_start(struct bfa_s *bfa)
+{
+	if (bfa->iocfc.cfgdone)
+		bfa_iocfc_start_submod(bfa);
+}
+
+/**
+ * IOC stop called from bfa_stop(). Called only when driver is unloaded
+ * for this instance.
+ */
+void
+bfa_iocfc_stop(struct bfa_s *bfa)
+{
+	bfa->iocfc.action = BFA_IOCFC_ACT_STOP;
+
+	bfa->rme_process = BFA_FALSE;
+	bfa_ioc_disable(&bfa->ioc);
+}
+
+void
+bfa_iocfc_isr(void *bfaarg, struct bfi_mbmsg_s *m)
+{
+	struct bfa_s		*bfa = bfaarg;
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+	union bfi_iocfc_i2h_msg_u	*msg;
+
+	msg = (union bfi_iocfc_i2h_msg_u *) m;
+	bfa_trc(bfa, msg->mh.msg_id);
+
+	switch (msg->mh.msg_id) {
+	case BFI_IOCFC_I2H_CFG_REPLY:
+		iocfc->cfg_reply = &msg->cfg_reply;
+		bfa_iocfc_cfgrsp(bfa);
+		break;
+
+	case BFI_IOCFC_I2H_GET_STATS_RSP:
+		if (iocfc->stats_busy == BFA_FALSE
+		    || iocfc->stats_status == BFA_STATUS_ETIMER)
+			break;
+
+		bfa_timer_stop(&iocfc->stats_timer);
+		iocfc->stats_status = BFA_STATUS_OK;
+		bfa_cb_queue(bfa, &iocfc->stats_hcb_qe, bfa_iocfc_stats_cb,
+			      bfa);
+		break;
+	case BFI_IOCFC_I2H_CLEAR_STATS_RSP:
+		/*
+		 * check for timer pop before processing the rsp
+		 */
+		if (iocfc->stats_busy == BFA_FALSE
+		    || iocfc->stats_status == BFA_STATUS_ETIMER)
+			break;
+
+		bfa_timer_stop(&iocfc->stats_timer);
+		iocfc->stats_status = BFA_STATUS_OK;
+		bfa_cb_queue(bfa, &iocfc->stats_hcb_qe,
+			      bfa_iocfc_stats_clr_cb, bfa);
+		break;
+	case BFI_IOCFC_I2H_UPDATEQ_RSP:
+		iocfc->updateq_cbfn(iocfc->updateq_cbarg, BFA_STATUS_OK);
+		break;
+	default:
+		bfa_assert(0);
+	}
+}
+
+#ifndef BFA_BIOS_BUILD
+void
+bfa_adapter_get_attr(struct bfa_s *bfa, struct bfa_adapter_attr_s *ad_attr)
+{
+	bfa_ioc_get_adapter_attr(&bfa->ioc, ad_attr);
+}
+
+u64
+bfa_adapter_get_id(struct bfa_s *bfa)
+{
+	return bfa_ioc_get_adid(&bfa->ioc);
+}
+
+void
+bfa_iocfc_get_attr(struct bfa_s *bfa, struct bfa_iocfc_attr_s *attr)
+{
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+
+	attr->intr_attr = iocfc->cfginfo->intr_attr;
+	attr->config	= iocfc->cfg;
+}
+
+bfa_status_t
+bfa_iocfc_israttr_set(struct bfa_s *bfa, struct bfa_iocfc_intr_attr_s *attr)
+{
+	struct bfa_iocfc_s		*iocfc = &bfa->iocfc;
+	struct bfi_iocfc_set_intr_req_s *m;
+
+	iocfc->cfginfo->intr_attr = *attr;
+	if (!bfa_iocfc_is_operational(bfa))
+		return BFA_STATUS_OK;
+
+	m = bfa_reqq_next(bfa, BFA_REQQ_IOC);
+	if (!m)
+		return BFA_STATUS_DEVBUSY;
+
+	bfi_h2i_set(m->mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_SET_INTR_REQ,
+			bfa_lpuid(bfa));
+	m->coalesce = attr->coalesce;
+	m->delay    = bfa_os_htons(attr->delay);
+	m->latency  = bfa_os_htons(attr->latency);
+
+	bfa_trc(bfa, attr->delay);
+	bfa_trc(bfa, attr->latency);
+
+	bfa_reqq_produce(bfa, BFA_REQQ_IOC);
+	return BFA_STATUS_OK;
+}
+
+void
+bfa_iocfc_set_snsbase(struct bfa_s *bfa, u64 snsbase_pa)
+{
+	struct bfa_iocfc_s      *iocfc = &bfa->iocfc;
+
+	iocfc->cfginfo->sense_buf_len = (BFI_IOIM_SNSLEN - 1);
+	bfa_dma_be_addr_set(iocfc->cfginfo->ioim_snsbase, snsbase_pa);
+}
+
+bfa_status_t
+bfa_iocfc_get_stats(struct bfa_s *bfa, struct bfa_iocfc_stats_s *stats,
+		      bfa_cb_ioc_t cbfn, void *cbarg)
+{
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+
+	if (iocfc->stats_busy) {
+		bfa_trc(bfa, iocfc->stats_busy);
+		return (BFA_STATUS_DEVBUSY);
+	}
+
+	iocfc->stats_busy = BFA_TRUE;
+	iocfc->stats_ret = stats;
+	iocfc->stats_cbfn = cbfn;
+	iocfc->stats_cbarg = cbarg;
+
+	bfa_iocfc_stats_query(bfa);
+
+	return (BFA_STATUS_OK);
+}
+
+bfa_status_t
+bfa_iocfc_clear_stats(struct bfa_s *bfa, bfa_cb_ioc_t cbfn, void *cbarg)
+{
+	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
+
+	if (iocfc->stats_busy) {
+		bfa_trc(bfa, iocfc->stats_busy);
+		return (BFA_STATUS_DEVBUSY);
+	}
+
+	iocfc->stats_busy = BFA_TRUE;
+	iocfc->stats_cbfn = cbfn;
+	iocfc->stats_cbarg = cbarg;
+
+	bfa_iocfc_stats_clear(bfa);
+	return (BFA_STATUS_OK);
+}
+
+/**
+ * Enable IOC after it is disabled.
+ */
+void
+bfa_iocfc_enable(struct bfa_s *bfa)
+{
+	bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0,
+		     "IOC Enable");
+	bfa_ioc_enable(&bfa->ioc);
+}
+
+void
+bfa_iocfc_disable(struct bfa_s *bfa)
+{
+	bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0,
+		     "IOC Disable");
+	bfa->iocfc.action = BFA_IOCFC_ACT_DISABLE;
+
+	bfa->rme_process = BFA_FALSE;
+	bfa_ioc_disable(&bfa->ioc);
+}
+
+
+bfa_boolean_t
+bfa_iocfc_is_operational(struct bfa_s *bfa)
+{
+	return bfa_ioc_is_operational(&bfa->ioc) && bfa->iocfc.cfgdone;
+}
+
+/**
+ * Return boot target port wwns -- read from boot information in flash.
+ */
+void
+bfa_iocfc_get_bootwwns(struct bfa_s *bfa, u8 *nwwns, wwn_t **wwns)
+{
+	struct bfa_iocfc_s		*iocfc	 = &bfa->iocfc;
+	struct bfi_iocfc_cfgrsp_s	*cfgrsp  = iocfc->cfgrsp;
+
+	*nwwns = cfgrsp->bootwwns.nwwns;
+	*wwns = cfgrsp->bootwwns.wwn;
+}
+
+#endif
+
+
diff --git a/drivers/scsi/bfa/bfa_iocfc.h b/drivers/scsi/bfa/bfa_iocfc.h
new file mode 100644
index 000000000000..7ad177ed4cfc
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_iocfc.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_IOCFC_H__
+#define __BFA_IOCFC_H__
+
+#include <bfa_ioc.h>
+#include <bfa.h>
+#include <bfi/bfi_iocfc.h>
+#include <bfa_callback_priv.h>
+
+#define BFA_REQQ_NELEMS_MIN	(4)
+#define BFA_RSPQ_NELEMS_MIN	(4)
+
+struct bfa_iocfc_regs_s {
+	bfa_os_addr_t   intr_status;
+	bfa_os_addr_t   intr_mask;
+	bfa_os_addr_t   cpe_q_pi[BFI_IOC_MAX_CQS];
+	bfa_os_addr_t   cpe_q_ci[BFI_IOC_MAX_CQS];
+	bfa_os_addr_t   cpe_q_depth[BFI_IOC_MAX_CQS];
+	bfa_os_addr_t   cpe_q_ctrl[BFI_IOC_MAX_CQS];
+	bfa_os_addr_t   rme_q_ci[BFI_IOC_MAX_CQS];
+	bfa_os_addr_t   rme_q_pi[BFI_IOC_MAX_CQS];
+	bfa_os_addr_t   rme_q_depth[BFI_IOC_MAX_CQS];
+	bfa_os_addr_t   rme_q_ctrl[BFI_IOC_MAX_CQS];
+};
+
+/**
+ * MSIX vector handlers
+ */
+#define BFA_MSIX_MAX_VECTORS	22
+typedef void (*bfa_msix_handler_t)(struct bfa_s *bfa, int vec);
+struct bfa_msix_s {
+	int	nvecs;
+	bfa_msix_handler_t handler[BFA_MSIX_MAX_VECTORS];
+};
+
+/**
+ * Chip specific interfaces
+ */
+struct bfa_hwif_s {
+	void (*hw_reginit)(struct bfa_s *bfa);
+	void (*hw_rspq_ack)(struct bfa_s *bfa, int rspq);
+	void (*hw_msix_init)(struct bfa_s *bfa, int nvecs);
+	void (*hw_msix_install)(struct bfa_s *bfa);
+	void (*hw_msix_uninstall)(struct bfa_s *bfa);
+	void (*hw_isr_mode_set)(struct bfa_s *bfa, bfa_boolean_t msix);
+	void (*hw_msix_getvecs)(struct bfa_s *bfa, u32 *vecmap,
+			u32 *nvecs, u32 *maxvec);
+};
+typedef void (*bfa_cb_iocfc_t) (void *cbarg, enum bfa_status status);
+
+struct bfa_iocfc_s {
+	struct bfa_s 		*bfa;
+	struct bfa_iocfc_cfg_s 	cfg;
+	int			action;
+
+	u32        	req_cq_pi[BFI_IOC_MAX_CQS];
+	u32        	rsp_cq_ci[BFI_IOC_MAX_CQS];
+
+	struct bfa_cb_qe_s	init_hcb_qe;
+	struct bfa_cb_qe_s	stop_hcb_qe;
+	struct bfa_cb_qe_s	dis_hcb_qe;
+	struct bfa_cb_qe_s	stats_hcb_qe;
+	bfa_boolean_t		cfgdone;
+
+	struct bfa_dma_s	cfg_info;
+	struct bfi_iocfc_cfg_s *cfginfo;
+	struct bfa_dma_s	cfgrsp_dma;
+	struct bfi_iocfc_cfgrsp_s *cfgrsp;
+	struct bfi_iocfc_cfg_reply_s *cfg_reply;
+
+	u8			*stats_kva;
+	u64		stats_pa;
+	struct bfa_fw_stats_s 	*fw_stats;
+	struct bfa_timer_s 	stats_timer;	/*  timer */
+	struct bfa_iocfc_stats_s *stats_ret;	/*  driver stats location */
+	bfa_status_t		stats_status;	/*  stats/statsclr status */
+	bfa_boolean_t   	stats_busy;	/*  outstanding stats */
+	bfa_cb_ioc_t		stats_cbfn;	/*  driver callback function */
+	void           		*stats_cbarg;	/*  user callback arg */
+
+	struct bfa_dma_s   	req_cq_ba[BFI_IOC_MAX_CQS];
+	struct bfa_dma_s   	req_cq_shadow_ci[BFI_IOC_MAX_CQS];
+	struct bfa_dma_s   	rsp_cq_ba[BFI_IOC_MAX_CQS];
+	struct bfa_dma_s   	rsp_cq_shadow_pi[BFI_IOC_MAX_CQS];
+	struct bfa_iocfc_regs_s	bfa_regs;	/*  BFA device registers */
+	struct bfa_hwif_s	hwif;
+
+	bfa_cb_iocfc_t		updateq_cbfn; /*  bios callback function */
+	void				*updateq_cbarg;	/*  bios callback arg */
+};
+
+#define bfa_lpuid(__bfa)		bfa_ioc_portid(&(__bfa)->ioc)
+#define bfa_msix_init(__bfa, __nvecs)	\
+	(__bfa)->iocfc.hwif.hw_msix_init(__bfa, __nvecs)
+#define bfa_msix_install(__bfa)	\
+	(__bfa)->iocfc.hwif.hw_msix_install(__bfa)
+#define bfa_msix_uninstall(__bfa)	\
+	(__bfa)->iocfc.hwif.hw_msix_uninstall(__bfa)
+#define bfa_isr_mode_set(__bfa, __msix)	\
+	(__bfa)->iocfc.hwif.hw_isr_mode_set(__bfa, __msix)
+#define bfa_msix_getvecs(__bfa, __vecmap, __nvecs, __maxvec)	\
+	(__bfa)->iocfc.hwif.hw_msix_getvecs(__bfa, __vecmap, __nvecs, __maxvec)
+
+/*
+ * FC specific IOC functions.
+ */
+void bfa_iocfc_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+		u32 *dm_len);
+void bfa_iocfc_attach(struct bfa_s *bfa, void *bfad,
+		struct bfa_iocfc_cfg_s *cfg, struct bfa_meminfo_s *meminfo,
+		struct bfa_pcidev_s *pcidev);
+void bfa_iocfc_detach(struct bfa_s *bfa);
+void bfa_iocfc_init(struct bfa_s *bfa);
+void bfa_iocfc_start(struct bfa_s *bfa);
+void bfa_iocfc_stop(struct bfa_s *bfa);
+void bfa_iocfc_isr(void *bfa, struct bfi_mbmsg_s *msg);
+void bfa_iocfc_set_snsbase(struct bfa_s *bfa, u64 snsbase_pa);
+bfa_boolean_t bfa_iocfc_is_operational(struct bfa_s *bfa);
+void bfa_iocfc_reset_queues(struct bfa_s *bfa);
+void bfa_iocfc_updateq(struct bfa_s *bfa, u32 reqq_ba, u32 rspq_ba,
+			u32 reqq_sci, u32 rspq_spi,
+			bfa_cb_iocfc_t cbfn, void *cbarg);
+
+void bfa_msix_all(struct bfa_s *bfa, int vec);
+void bfa_msix_reqq(struct bfa_s *bfa, int vec);
+void bfa_msix_rspq(struct bfa_s *bfa, int vec);
+void bfa_msix_lpu_err(struct bfa_s *bfa, int vec);
+
+void bfa_hwcb_reginit(struct bfa_s *bfa);
+void bfa_hwcb_rspq_ack(struct bfa_s *bfa, int rspq);
+void bfa_hwcb_msix_init(struct bfa_s *bfa, int nvecs);
+void bfa_hwcb_msix_install(struct bfa_s *bfa);
+void bfa_hwcb_msix_uninstall(struct bfa_s *bfa);
+void bfa_hwcb_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix);
+void bfa_hwcb_msix_getvecs(struct bfa_s *bfa, u32 *vecmap,
+			u32 *nvecs, u32 *maxvec);
+void bfa_hwct_reginit(struct bfa_s *bfa);
+void bfa_hwct_rspq_ack(struct bfa_s *bfa, int rspq);
+void bfa_hwct_msix_init(struct bfa_s *bfa, int nvecs);
+void bfa_hwct_msix_install(struct bfa_s *bfa);
+void bfa_hwct_msix_uninstall(struct bfa_s *bfa);
+void bfa_hwct_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix);
+void bfa_hwct_msix_getvecs(struct bfa_s *bfa, u32 *vecmap,
+			u32 *nvecs, u32 *maxvec);
+
+void bfa_com_meminfo(bfa_boolean_t mincfg, u32 *dm_len);
+void bfa_com_attach(struct bfa_s *bfa, struct bfa_meminfo_s *mi,
+		bfa_boolean_t mincfg);
+void bfa_iocfc_get_bootwwns(struct bfa_s *bfa, u8 *nwwns, wwn_t **wwns);
+
+#endif /* __BFA_IOCFC_H__ */
+
diff --git a/drivers/scsi/bfa/bfa_iocfc_q.c b/drivers/scsi/bfa/bfa_iocfc_q.c
new file mode 100644
index 000000000000..500a17df40b2
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_iocfc_q.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include "bfa_intr_priv.h"
+
+BFA_TRC_FILE(HAL, IOCFC_Q);
+
+void
+bfa_iocfc_updateq(struct bfa_s *bfa, u32 reqq_ba, u32 rspq_ba,
+				u32 reqq_sci, u32 rspq_spi, bfa_cb_iocfc_t cbfn,
+				void *cbarg)
+{
+	struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+	struct bfi_iocfc_updateq_req_s updateq_req;
+
+	iocfc->updateq_cbfn = cbfn;
+	iocfc->updateq_cbarg = cbarg;
+
+	bfi_h2i_set(updateq_req.mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_UPDATEQ_REQ,
+			bfa_lpuid(bfa));
+
+	updateq_req.reqq_ba = bfa_os_htonl(reqq_ba);
+	updateq_req.rspq_ba = bfa_os_htonl(rspq_ba);
+	updateq_req.reqq_sci = bfa_os_htonl(reqq_sci);
+	updateq_req.rspq_spi = bfa_os_htonl(rspq_spi);
+
+	bfa_ioc_mbox_send(&bfa->ioc, &updateq_req,
+			sizeof(struct bfi_iocfc_updateq_req_s));
+}
diff --git a/drivers/scsi/bfa/bfa_ioim.c b/drivers/scsi/bfa/bfa_ioim.c
new file mode 100644
index 000000000000..7ae2552e1e14
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_ioim.c
@@ -0,0 +1,1311 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <cs/bfa_debug.h>
+#include <bfa_cb_ioim_macros.h>
+
+BFA_TRC_FILE(HAL, IOIM);
+
+/*
+ * forward declarations.
+ */
+static bfa_boolean_t	bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim);
+static bfa_boolean_t	bfa_ioim_sge_setup(struct bfa_ioim_s *ioim);
+static void		bfa_ioim_sgpg_setup(struct bfa_ioim_s *ioim);
+static bfa_boolean_t	bfa_ioim_send_abort(struct bfa_ioim_s *ioim);
+static void		bfa_ioim_notify_cleanup(struct bfa_ioim_s *ioim);
+static void __bfa_cb_ioim_good_comp(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_ioim_comp(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_ioim_abort(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_ioim_failed(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_ioim_pathtov(void *cbarg, bfa_boolean_t complete);
+
+/**
+ *  bfa_ioim_sm
+ */
+
+/**
+ * IO state machine events
+ */
+enum bfa_ioim_event {
+	BFA_IOIM_SM_START = 1,		/*  io start request from host */
+	BFA_IOIM_SM_COMP_GOOD = 2,	/*  io good comp, resource free */
+	BFA_IOIM_SM_COMP = 3,		/*  io comp, resource is free */
+	BFA_IOIM_SM_COMP_UTAG = 4,	/*  io comp, resource is free */
+	BFA_IOIM_SM_DONE = 5,		/*  io comp, resource not free */
+	BFA_IOIM_SM_FREE = 6,		/*  io resource is freed */
+	BFA_IOIM_SM_ABORT = 7,		/*  abort request from scsi stack */
+	BFA_IOIM_SM_ABORT_COMP = 8,	/*  abort from f/w */
+	BFA_IOIM_SM_ABORT_DONE = 9,	/*  abort completion from f/w */
+	BFA_IOIM_SM_QRESUME = 10,	/*  CQ space available to queue IO */
+	BFA_IOIM_SM_SGALLOCED = 11,	/*  SG page allocation successful */
+	BFA_IOIM_SM_SQRETRY = 12,	/*  sequence recovery retry */
+	BFA_IOIM_SM_HCB	= 13,		/*  bfa callback complete */
+	BFA_IOIM_SM_CLEANUP = 14,	/*  IO cleanup from itnim */
+	BFA_IOIM_SM_TMSTART = 15,	/*  IO cleanup from tskim */
+	BFA_IOIM_SM_TMDONE = 16,	/*  IO cleanup from tskim */
+	BFA_IOIM_SM_HWFAIL = 17,	/*  IOC h/w failure event */
+	BFA_IOIM_SM_IOTOV = 18,		/*  ITN offline TOV       */
+};
+
+/*
+ * forward declaration of IO state machine
+ */
+static void     bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim,
+				       enum bfa_ioim_event event);
+static void     bfa_ioim_sm_sgalloc(struct bfa_ioim_s *ioim,
+					enum bfa_ioim_event event);
+static void     bfa_ioim_sm_active(struct bfa_ioim_s *ioim,
+				       enum bfa_ioim_event event);
+static void     bfa_ioim_sm_abort(struct bfa_ioim_s *ioim,
+				      enum bfa_ioim_event event);
+static void     bfa_ioim_sm_cleanup(struct bfa_ioim_s *ioim,
+					enum bfa_ioim_event event);
+static void     bfa_ioim_sm_qfull(struct bfa_ioim_s *ioim,
+				      enum bfa_ioim_event event);
+static void     bfa_ioim_sm_abort_qfull(struct bfa_ioim_s *ioim,
+					    enum bfa_ioim_event event);
+static void     bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim,
+					      enum bfa_ioim_event event);
+static void     bfa_ioim_sm_hcb(struct bfa_ioim_s *ioim,
+				    enum bfa_ioim_event event);
+static void     bfa_ioim_sm_hcb_free(struct bfa_ioim_s *ioim,
+					 enum bfa_ioim_event event);
+static void     bfa_ioim_sm_resfree(struct bfa_ioim_s *ioim,
+					enum bfa_ioim_event event);
+
+/**
+ * 		IO is not started (unallocated).
+ */
+static void
+bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc_fp(ioim->bfa, ioim->iotag);
+	bfa_trc_fp(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_START:
+		if (!bfa_itnim_is_online(ioim->itnim)) {
+			if (!bfa_itnim_hold_io(ioim->itnim)) {
+				bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+				list_del(&ioim->qe);
+				list_add_tail(&ioim->qe,
+					&ioim->fcpim->ioim_comp_q);
+				bfa_cb_queue(ioim->bfa, &ioim->hcb_qe,
+						__bfa_cb_ioim_pathtov, ioim);
+			} else {
+				list_del(&ioim->qe);
+				list_add_tail(&ioim->qe,
+					&ioim->itnim->pending_q);
+			}
+			break;
+		}
+
+		if (ioim->nsges > BFI_SGE_INLINE) {
+			if (!bfa_ioim_sge_setup(ioim)) {
+				bfa_sm_set_state(ioim, bfa_ioim_sm_sgalloc);
+				return;
+			}
+		}
+
+		if (!bfa_ioim_send_ioreq(ioim)) {
+			bfa_sm_set_state(ioim, bfa_ioim_sm_qfull);
+			break;
+		}
+
+		bfa_sm_set_state(ioim, bfa_ioim_sm_active);
+		break;
+
+	case BFA_IOIM_SM_IOTOV:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe,
+				__bfa_cb_ioim_pathtov, ioim);
+		break;
+
+	case BFA_IOIM_SM_ABORT:
+		/**
+		 * IO in pending queue can get abort requests. Complete abort
+		 * requests immediately.
+		 */
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_assert(bfa_q_is_on_q(&ioim->itnim->pending_q, ioim));
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+				ioim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		IO is waiting for SG pages.
+ */
+static void
+bfa_ioim_sm_sgalloc(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_trc(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_SGALLOCED:
+		if (!bfa_ioim_send_ioreq(ioim)) {
+			bfa_sm_set_state(ioim, bfa_ioim_sm_qfull);
+			break;
+		}
+		bfa_sm_set_state(ioim, bfa_ioim_sm_active);
+		break;
+
+	case BFA_IOIM_SM_CLEANUP:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_sgpg_wcancel(ioim->bfa, &ioim->iosp->sgpg_wqe);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+			      ioim);
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_ABORT:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_sgpg_wcancel(ioim->bfa, &ioim->iosp->sgpg_wqe);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_sgpg_wcancel(ioim->bfa, &ioim->iosp->sgpg_wqe);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+			      ioim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		IO is active.
+ */
+static void
+bfa_ioim_sm_active(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc_fp(ioim->bfa, ioim->iotag);
+	bfa_trc_fp(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_COMP_GOOD:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe,
+			      __bfa_cb_ioim_good_comp, ioim);
+		break;
+
+	case BFA_IOIM_SM_COMP:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_comp,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_DONE:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_comp,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_ABORT:
+		ioim->iosp->abort_explicit = BFA_TRUE;
+		ioim->io_cbfn = __bfa_cb_ioim_abort;
+
+		if (bfa_ioim_send_abort(ioim))
+			bfa_sm_set_state(ioim, bfa_ioim_sm_abort);
+		else {
+			bfa_sm_set_state(ioim, bfa_ioim_sm_abort_qfull);
+			bfa_reqq_wait(ioim->bfa, ioim->itnim->reqq,
+					  &ioim->iosp->reqq_wait);
+		}
+		break;
+
+	case BFA_IOIM_SM_CLEANUP:
+		ioim->iosp->abort_explicit = BFA_FALSE;
+		ioim->io_cbfn = __bfa_cb_ioim_failed;
+
+		if (bfa_ioim_send_abort(ioim))
+			bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup);
+		else {
+			bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup_qfull);
+			bfa_reqq_wait(ioim->bfa, ioim->itnim->reqq,
+					  &ioim->iosp->reqq_wait);
+		}
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+			      ioim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		IO is being aborted, waiting for completion from firmware.
+ */
+static void
+bfa_ioim_sm_abort(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_trc(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_COMP_GOOD:
+	case BFA_IOIM_SM_COMP:
+	case BFA_IOIM_SM_DONE:
+	case BFA_IOIM_SM_FREE:
+		break;
+
+	case BFA_IOIM_SM_ABORT_DONE:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_ABORT_COMP:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_COMP_UTAG:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_CLEANUP:
+		bfa_assert(ioim->iosp->abort_explicit == BFA_TRUE);
+		ioim->iosp->abort_explicit = BFA_FALSE;
+
+		if (bfa_ioim_send_abort(ioim))
+			bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup);
+		else {
+			bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup_qfull);
+			bfa_reqq_wait(ioim->bfa, ioim->itnim->reqq,
+					  &ioim->iosp->reqq_wait);
+		}
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+			      ioim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * IO is being cleaned up (implicit abort), waiting for completion from
+ * firmware.
+ */
+static void
+bfa_ioim_sm_cleanup(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_trc(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_COMP_GOOD:
+	case BFA_IOIM_SM_COMP:
+	case BFA_IOIM_SM_DONE:
+	case BFA_IOIM_SM_FREE:
+		break;
+
+	case BFA_IOIM_SM_ABORT:
+		/**
+		 * IO is already being aborted implicitly
+		 */
+		ioim->io_cbfn = __bfa_cb_ioim_abort;
+		break;
+
+	case BFA_IOIM_SM_ABORT_DONE:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_ABORT_COMP:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_COMP_UTAG:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_CLEANUP:
+		/**
+		 * IO can be in cleanup state already due to TM command. 2nd cleanup
+		 * request comes from ITN offline event.
+		 */
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		IO is waiting for room in request CQ
+ */
+static void
+bfa_ioim_sm_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_trc(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_QRESUME:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_active);
+		bfa_ioim_send_ioreq(ioim);
+		break;
+
+	case BFA_IOIM_SM_ABORT:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_CLEANUP:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+			      ioim);
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+			      ioim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Active IO is being aborted, waiting for room in request CQ.
+ */
+static void
+bfa_ioim_sm_abort_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_trc(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_QRESUME:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_abort);
+		bfa_ioim_send_abort(ioim);
+		break;
+
+	case BFA_IOIM_SM_CLEANUP:
+		bfa_assert(ioim->iosp->abort_explicit == BFA_TRUE);
+		ioim->iosp->abort_explicit = BFA_FALSE;
+		bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup_qfull);
+		break;
+
+	case BFA_IOIM_SM_COMP_GOOD:
+	case BFA_IOIM_SM_COMP:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_DONE:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+		bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+			      ioim);
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+			      ioim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Active IO is being cleaned up, waiting for room in request CQ.
+ */
+static void
+bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_trc(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_QRESUME:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup);
+		bfa_ioim_send_abort(ioim);
+		break;
+
+	case BFA_IOIM_SM_ABORT:
+		/**
+		 * IO is alraedy being cleaned up implicitly
+		 */
+		ioim->io_cbfn = __bfa_cb_ioim_abort;
+		break;
+
+	case BFA_IOIM_SM_COMP_GOOD:
+	case BFA_IOIM_SM_COMP:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_DONE:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+		bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+			      ioim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * IO bfa callback is pending.
+ */
+static void
+bfa_ioim_sm_hcb(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc_fp(ioim->bfa, ioim->iotag);
+	bfa_trc_fp(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_HCB:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_uninit);
+		bfa_ioim_free(ioim);
+		bfa_cb_ioim_resfree(ioim->bfa->bfad);
+		break;
+
+	case BFA_IOIM_SM_CLEANUP:
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * IO bfa callback is pending. IO resource cannot be freed.
+ */
+static void
+bfa_ioim_sm_hcb_free(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_trc(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_HCB:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_resfree);
+		list_del(&ioim->qe);
+		list_add_tail(&ioim->qe, &ioim->fcpim->ioim_resfree_q);
+		break;
+
+	case BFA_IOIM_SM_FREE:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		break;
+
+	case BFA_IOIM_SM_CLEANUP:
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * IO is completed, waiting resource free from firmware.
+ */
+static void
+bfa_ioim_sm_resfree(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_trc(ioim->bfa, event);
+
+	switch (event) {
+	case BFA_IOIM_SM_FREE:
+		bfa_sm_set_state(ioim, bfa_ioim_sm_uninit);
+		bfa_ioim_free(ioim);
+		bfa_cb_ioim_resfree(ioim->bfa->bfad);
+		break;
+
+	case BFA_IOIM_SM_CLEANUP:
+		bfa_ioim_notify_cleanup(ioim);
+		break;
+
+	case BFA_IOIM_SM_HWFAIL:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  bfa_ioim_private
+ */
+
+static void
+__bfa_cb_ioim_good_comp(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_ioim_s *ioim = cbarg;
+
+	if (!complete) {
+		bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+		return;
+	}
+
+	bfa_cb_ioim_good_comp(ioim->bfa->bfad, ioim->dio);
+}
+
+static void
+__bfa_cb_ioim_comp(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_ioim_s	*ioim = cbarg;
+	struct bfi_ioim_rsp_s *m;
+	u8		*snsinfo = NULL;
+	u8         sns_len = 0;
+	s32         residue = 0;
+
+	if (!complete) {
+		bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+		return;
+	}
+
+	m = (struct bfi_ioim_rsp_s *) &ioim->iosp->comp_rspmsg;
+	if (m->io_status == BFI_IOIM_STS_OK) {
+		/**
+		 * setup sense information, if present
+		 */
+		if (m->scsi_status == SCSI_STATUS_CHECK_CONDITION
+					&& m->sns_len) {
+			sns_len = m->sns_len;
+			snsinfo = ioim->iosp->snsinfo;
+		}
+
+		/**
+		 * setup residue value correctly for normal completions
+		 */
+		if (m->resid_flags == FCP_RESID_UNDER)
+			residue = bfa_os_ntohl(m->residue);
+		if (m->resid_flags == FCP_RESID_OVER) {
+			residue = bfa_os_ntohl(m->residue);
+			residue = -residue;
+		}
+	}
+
+	bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, m->io_status,
+			  m->scsi_status, sns_len, snsinfo, residue);
+}
+
+static void
+__bfa_cb_ioim_failed(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_ioim_s *ioim = cbarg;
+
+	if (!complete) {
+		bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+		return;
+	}
+
+	bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_ABORTED,
+			  0, 0, NULL, 0);
+}
+
+static void
+__bfa_cb_ioim_pathtov(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_ioim_s *ioim = cbarg;
+
+	if (!complete) {
+		bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+		return;
+	}
+
+	bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_PATHTOV,
+			  0, 0, NULL, 0);
+}
+
+static void
+__bfa_cb_ioim_abort(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_ioim_s *ioim = cbarg;
+
+	if (!complete) {
+		bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+		return;
+	}
+
+	bfa_cb_ioim_abort(ioim->bfa->bfad, ioim->dio);
+}
+
+static void
+bfa_ioim_sgpg_alloced(void *cbarg)
+{
+	struct bfa_ioim_s *ioim = cbarg;
+
+	ioim->nsgpgs = BFA_SGPG_NPAGE(ioim->nsges);
+	list_splice_tail_init(&ioim->iosp->sgpg_wqe.sgpg_q, &ioim->sgpg_q);
+	bfa_ioim_sgpg_setup(ioim);
+	bfa_sm_send_event(ioim, BFA_IOIM_SM_SGALLOCED);
+}
+
+/**
+ * Send I/O request to firmware.
+ */
+static          bfa_boolean_t
+bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim)
+{
+	struct bfa_itnim_s *itnim = ioim->itnim;
+	struct bfi_ioim_req_s *m;
+	static struct fcp_cmnd_s cmnd_z0 = { 0 };
+	struct bfi_sge_s      *sge;
+	u32        pgdlen = 0;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(ioim->bfa, itnim->reqq);
+	if (!m) {
+		bfa_reqq_wait(ioim->bfa, ioim->itnim->reqq,
+				  &ioim->iosp->reqq_wait);
+		return BFA_FALSE;
+	}
+
+	/**
+	 * build i/o request message next
+	 */
+	m->io_tag = bfa_os_htons(ioim->iotag);
+	m->rport_hdl = ioim->itnim->rport->fw_handle;
+	m->io_timeout = bfa_cb_ioim_get_timeout(ioim->dio);
+
+	/**
+	 * build inline IO SG element here
+	 */
+	sge = &m->sges[0];
+	if (ioim->nsges) {
+		sge->sga = bfa_cb_ioim_get_sgaddr(ioim->dio, 0);
+		pgdlen = bfa_cb_ioim_get_sglen(ioim->dio, 0);
+		sge->sg_len = pgdlen;
+		sge->flags = (ioim->nsges > BFI_SGE_INLINE) ?
+					BFI_SGE_DATA_CPL : BFI_SGE_DATA_LAST;
+		bfa_sge_to_be(sge);
+		sge++;
+	}
+
+	if (ioim->nsges > BFI_SGE_INLINE) {
+		sge->sga = ioim->sgpg->sgpg_pa;
+	} else {
+		sge->sga.a32.addr_lo = 0;
+		sge->sga.a32.addr_hi = 0;
+	}
+	sge->sg_len = pgdlen;
+	sge->flags = BFI_SGE_PGDLEN;
+	bfa_sge_to_be(sge);
+
+	/**
+	 * set up I/O command parameters
+	 */
+	bfa_os_assign(m->cmnd, cmnd_z0);
+	m->cmnd.lun = bfa_cb_ioim_get_lun(ioim->dio);
+	m->cmnd.iodir = bfa_cb_ioim_get_iodir(ioim->dio);
+	bfa_os_assign(m->cmnd.cdb,
+			*(struct scsi_cdb_s *)bfa_cb_ioim_get_cdb(ioim->dio));
+	m->cmnd.fcp_dl = bfa_os_htonl(bfa_cb_ioim_get_size(ioim->dio));
+
+	/**
+	 * set up I/O message header
+	 */
+	switch (m->cmnd.iodir) {
+	case FCP_IODIR_READ:
+		bfi_h2i_set(m->mh, BFI_MC_IOIM_READ, 0, bfa_lpuid(ioim->bfa));
+		bfa_stats(itnim, input_reqs);
+		break;
+	case FCP_IODIR_WRITE:
+		bfi_h2i_set(m->mh, BFI_MC_IOIM_WRITE, 0, bfa_lpuid(ioim->bfa));
+		bfa_stats(itnim, output_reqs);
+		break;
+	case FCP_IODIR_RW:
+		bfa_stats(itnim, input_reqs);
+		bfa_stats(itnim, output_reqs);
+	default:
+		bfi_h2i_set(m->mh, BFI_MC_IOIM_IO, 0, bfa_lpuid(ioim->bfa));
+	}
+	if (itnim->seq_rec ||
+	    (bfa_cb_ioim_get_size(ioim->dio) & (sizeof(u32) - 1)))
+		bfi_h2i_set(m->mh, BFI_MC_IOIM_IO, 0, bfa_lpuid(ioim->bfa));
+
+#ifdef IOIM_ADVANCED
+	m->cmnd.crn = bfa_cb_ioim_get_crn(ioim->dio);
+	m->cmnd.priority = bfa_cb_ioim_get_priority(ioim->dio);
+	m->cmnd.taskattr = bfa_cb_ioim_get_taskattr(ioim->dio);
+
+	/**
+	 * Handle large CDB (>16 bytes).
+	 */
+	m->cmnd.addl_cdb_len = (bfa_cb_ioim_get_cdblen(ioim->dio) -
+					FCP_CMND_CDB_LEN) / sizeof(u32);
+	if (m->cmnd.addl_cdb_len) {
+		bfa_os_memcpy(&m->cmnd.cdb + 1, (struct scsi_cdb_s *)
+				bfa_cb_ioim_get_cdb(ioim->dio) + 1,
+				m->cmnd.addl_cdb_len * sizeof(u32));
+		fcp_cmnd_fcpdl(&m->cmnd) =
+				bfa_os_htonl(bfa_cb_ioim_get_size(ioim->dio));
+	}
+#endif
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(ioim->bfa, itnim->reqq);
+	return BFA_TRUE;
+}
+
+/**
+ * Setup any additional SG pages needed.Inline SG element is setup
+ * at queuing time.
+ */
+static bfa_boolean_t
+bfa_ioim_sge_setup(struct bfa_ioim_s *ioim)
+{
+	u16        nsgpgs;
+
+	bfa_assert(ioim->nsges > BFI_SGE_INLINE);
+
+	/**
+	 * allocate SG pages needed
+	 */
+	nsgpgs = BFA_SGPG_NPAGE(ioim->nsges);
+	if (!nsgpgs)
+		return BFA_TRUE;
+
+	if (bfa_sgpg_malloc(ioim->bfa, &ioim->sgpg_q, nsgpgs)
+	    != BFA_STATUS_OK) {
+		bfa_sgpg_wait(ioim->bfa, &ioim->iosp->sgpg_wqe, nsgpgs);
+		return BFA_FALSE;
+	}
+
+	ioim->nsgpgs = nsgpgs;
+	bfa_ioim_sgpg_setup(ioim);
+
+	return BFA_TRUE;
+}
+
+static void
+bfa_ioim_sgpg_setup(struct bfa_ioim_s *ioim)
+{
+	int             sgeid, nsges, i;
+	struct bfi_sge_s      *sge;
+	struct bfa_sgpg_s *sgpg;
+	u32        pgcumsz;
+
+	sgeid = BFI_SGE_INLINE;
+	ioim->sgpg = sgpg = bfa_q_first(&ioim->sgpg_q);
+
+	do {
+		sge = sgpg->sgpg->sges;
+		nsges = ioim->nsges - sgeid;
+		if (nsges > BFI_SGPG_DATA_SGES)
+			nsges = BFI_SGPG_DATA_SGES;
+
+		pgcumsz = 0;
+		for (i = 0; i < nsges; i++, sge++, sgeid++) {
+			sge->sga = bfa_cb_ioim_get_sgaddr(ioim->dio, sgeid);
+			sge->sg_len = bfa_cb_ioim_get_sglen(ioim->dio, sgeid);
+			pgcumsz += sge->sg_len;
+
+			/**
+			 * set flags
+			 */
+			if (i < (nsges - 1))
+				sge->flags = BFI_SGE_DATA;
+			else if (sgeid < (ioim->nsges - 1))
+				sge->flags = BFI_SGE_DATA_CPL;
+			else
+				sge->flags = BFI_SGE_DATA_LAST;
+		}
+
+		sgpg = (struct bfa_sgpg_s *) bfa_q_next(sgpg);
+
+		/**
+		 * set the link element of each page
+		 */
+		if (sgeid == ioim->nsges) {
+			sge->flags = BFI_SGE_PGDLEN;
+			sge->sga.a32.addr_lo = 0;
+			sge->sga.a32.addr_hi = 0;
+		} else {
+			sge->flags = BFI_SGE_LINK;
+			sge->sga = sgpg->sgpg_pa;
+		}
+		sge->sg_len = pgcumsz;
+	} while (sgeid < ioim->nsges);
+}
+
+/**
+ * Send I/O abort request to firmware.
+ */
+static          bfa_boolean_t
+bfa_ioim_send_abort(struct bfa_ioim_s *ioim)
+{
+	struct bfa_itnim_s          *itnim = ioim->itnim;
+	struct bfi_ioim_abort_req_s *m;
+	enum bfi_ioim_h2i       msgop;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(ioim->bfa, itnim->reqq);
+	if (!m)
+		return BFA_FALSE;
+
+	/**
+	 * build i/o request message next
+	 */
+	if (ioim->iosp->abort_explicit)
+		msgop = BFI_IOIM_H2I_IOABORT_REQ;
+	else
+		msgop = BFI_IOIM_H2I_IOCLEANUP_REQ;
+
+	bfi_h2i_set(m->mh, BFI_MC_IOIM, msgop, bfa_lpuid(ioim->bfa));
+	m->io_tag    = bfa_os_htons(ioim->iotag);
+	m->abort_tag = ++ioim->abort_tag;
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(ioim->bfa, itnim->reqq);
+	return BFA_TRUE;
+}
+
+/**
+ * Call to resume any I/O requests waiting for room in request queue.
+ */
+static void
+bfa_ioim_qresume(void *cbarg)
+{
+	struct bfa_ioim_s *ioim = cbarg;
+
+	bfa_fcpim_stats(ioim->fcpim, qresumes);
+	bfa_sm_send_event(ioim, BFA_IOIM_SM_QRESUME);
+}
+
+
+static void
+bfa_ioim_notify_cleanup(struct bfa_ioim_s *ioim)
+{
+	/**
+	 * Move IO from itnim queue to fcpim global queue since itnim will be
+	 * freed.
+	 */
+	list_del(&ioim->qe);
+	list_add_tail(&ioim->qe, &ioim->fcpim->ioim_comp_q);
+
+	if (!ioim->iosp->tskim) {
+		if (ioim->fcpim->delay_comp && ioim->itnim->iotov_active) {
+			bfa_cb_dequeue(&ioim->hcb_qe);
+			list_del(&ioim->qe);
+			list_add_tail(&ioim->qe, &ioim->itnim->delay_comp_q);
+		}
+		bfa_itnim_iodone(ioim->itnim);
+	} else
+		bfa_tskim_iodone(ioim->iosp->tskim);
+}
+
+/**
+ * 		  or after the link comes back.
+ */
+void
+bfa_ioim_delayed_comp(struct bfa_ioim_s *ioim, bfa_boolean_t iotov)
+{
+	/**
+	 * If path tov timer expired, failback with PATHTOV status - these
+	 * IO requests are not normally retried by IO stack.
+	 *
+	 * Otherwise device cameback online and fail it with normal failed
+	 * status so that IO stack retries these failed IO requests.
+	 */
+	if (iotov)
+		ioim->io_cbfn = __bfa_cb_ioim_pathtov;
+	else
+		ioim->io_cbfn = __bfa_cb_ioim_failed;
+
+	bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+
+    /**
+     * Move IO to fcpim global queue since itnim will be
+     * freed.
+     */
+    list_del(&ioim->qe);
+    list_add_tail(&ioim->qe, &ioim->fcpim->ioim_comp_q);
+}
+
+
+
+/**
+ *  bfa_ioim_friend
+ */
+
+/**
+ * Memory allocation and initialization.
+ */
+void
+bfa_ioim_attach(struct bfa_fcpim_mod_s *fcpim, struct bfa_meminfo_s *minfo)
+{
+	struct bfa_ioim_s		*ioim;
+	struct bfa_ioim_sp_s	*iosp;
+	u16		i;
+	u8			*snsinfo;
+	u32		snsbufsz;
+
+	/**
+	 * claim memory first
+	 */
+	ioim = (struct bfa_ioim_s *) bfa_meminfo_kva(minfo);
+	fcpim->ioim_arr = ioim;
+	bfa_meminfo_kva(minfo) = (u8 *) (ioim + fcpim->num_ioim_reqs);
+
+	iosp = (struct bfa_ioim_sp_s *) bfa_meminfo_kva(minfo);
+	fcpim->ioim_sp_arr = iosp;
+	bfa_meminfo_kva(minfo) = (u8 *) (iosp + fcpim->num_ioim_reqs);
+
+	/**
+	 * Claim DMA memory for per IO sense data.
+	 */
+	snsbufsz = fcpim->num_ioim_reqs * BFI_IOIM_SNSLEN;
+	fcpim->snsbase.pa  = bfa_meminfo_dma_phys(minfo);
+	bfa_meminfo_dma_phys(minfo) += snsbufsz;
+
+	fcpim->snsbase.kva = bfa_meminfo_dma_virt(minfo);
+	bfa_meminfo_dma_virt(minfo) += snsbufsz;
+	snsinfo = fcpim->snsbase.kva;
+	bfa_iocfc_set_snsbase(fcpim->bfa, fcpim->snsbase.pa);
+
+	/**
+	 * Initialize ioim free queues
+	 */
+	INIT_LIST_HEAD(&fcpim->ioim_free_q);
+	INIT_LIST_HEAD(&fcpim->ioim_resfree_q);
+	INIT_LIST_HEAD(&fcpim->ioim_comp_q);
+
+	for (i = 0; i < fcpim->num_ioim_reqs;
+	     i++, ioim++, iosp++, snsinfo += BFI_IOIM_SNSLEN) {
+		/*
+		 * initialize IOIM
+		 */
+		bfa_os_memset(ioim, 0, sizeof(struct bfa_ioim_s));
+		ioim->iotag   = i;
+		ioim->bfa     = fcpim->bfa;
+		ioim->fcpim   = fcpim;
+		ioim->iosp    = iosp;
+		iosp->snsinfo = snsinfo;
+		INIT_LIST_HEAD(&ioim->sgpg_q);
+		bfa_reqq_winit(&ioim->iosp->reqq_wait,
+				   bfa_ioim_qresume, ioim);
+		bfa_sgpg_winit(&ioim->iosp->sgpg_wqe,
+				   bfa_ioim_sgpg_alloced, ioim);
+		bfa_sm_set_state(ioim, bfa_ioim_sm_uninit);
+
+		list_add_tail(&ioim->qe, &fcpim->ioim_free_q);
+	}
+}
+
+/**
+ * Driver detach time call.
+ */
+void
+bfa_ioim_detach(struct bfa_fcpim_mod_s *fcpim)
+{
+}
+
+void
+bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+	struct bfi_ioim_rsp_s *rsp = (struct bfi_ioim_rsp_s *) m;
+	struct bfa_ioim_s *ioim;
+	u16        iotag;
+	enum bfa_ioim_event evt = BFA_IOIM_SM_COMP;
+
+	iotag = bfa_os_ntohs(rsp->io_tag);
+
+	ioim = BFA_IOIM_FROM_TAG(fcpim, iotag);
+	bfa_assert(ioim->iotag == iotag);
+
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_trc(ioim->bfa, rsp->io_status);
+	bfa_trc(ioim->bfa, rsp->reuse_io_tag);
+
+	if (bfa_sm_cmp_state(ioim, bfa_ioim_sm_active))
+		bfa_os_assign(ioim->iosp->comp_rspmsg, *m);
+
+	switch (rsp->io_status) {
+	case BFI_IOIM_STS_OK:
+		bfa_fcpim_stats(fcpim, iocomp_ok);
+		if (rsp->reuse_io_tag == 0)
+			evt = BFA_IOIM_SM_DONE;
+		else
+			evt = BFA_IOIM_SM_COMP;
+		break;
+
+	case BFI_IOIM_STS_TIMEDOUT:
+	case BFI_IOIM_STS_ABORTED:
+		rsp->io_status = BFI_IOIM_STS_ABORTED;
+		bfa_fcpim_stats(fcpim, iocomp_aborted);
+		if (rsp->reuse_io_tag == 0)
+			evt = BFA_IOIM_SM_DONE;
+		else
+			evt = BFA_IOIM_SM_COMP;
+		break;
+
+	case BFI_IOIM_STS_PROTO_ERR:
+		bfa_fcpim_stats(fcpim, iocom_proto_err);
+		bfa_assert(rsp->reuse_io_tag);
+		evt = BFA_IOIM_SM_COMP;
+		break;
+
+	case BFI_IOIM_STS_SQER_NEEDED:
+		bfa_fcpim_stats(fcpim, iocom_sqer_needed);
+		bfa_assert(rsp->reuse_io_tag == 0);
+		evt = BFA_IOIM_SM_SQRETRY;
+		break;
+
+	case BFI_IOIM_STS_RES_FREE:
+		bfa_fcpim_stats(fcpim, iocom_res_free);
+		evt = BFA_IOIM_SM_FREE;
+		break;
+
+	case BFI_IOIM_STS_HOST_ABORTED:
+		bfa_fcpim_stats(fcpim, iocom_hostabrts);
+		if (rsp->abort_tag != ioim->abort_tag) {
+			bfa_trc(ioim->bfa, rsp->abort_tag);
+			bfa_trc(ioim->bfa, ioim->abort_tag);
+			return;
+		}
+
+		if (rsp->reuse_io_tag)
+			evt = BFA_IOIM_SM_ABORT_COMP;
+		else
+			evt = BFA_IOIM_SM_ABORT_DONE;
+		break;
+
+	case BFI_IOIM_STS_UTAG:
+		bfa_fcpim_stats(fcpim, iocom_utags);
+		evt = BFA_IOIM_SM_COMP_UTAG;
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+
+	bfa_sm_send_event(ioim, evt);
+}
+
+void
+bfa_ioim_good_comp_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+	struct bfi_ioim_rsp_s *rsp = (struct bfi_ioim_rsp_s *) m;
+	struct bfa_ioim_s *ioim;
+	u16        iotag;
+
+	iotag = bfa_os_ntohs(rsp->io_tag);
+
+	ioim = BFA_IOIM_FROM_TAG(fcpim, iotag);
+	bfa_assert(ioim->iotag == iotag);
+
+	bfa_trc_fp(ioim->bfa, ioim->iotag);
+	bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP_GOOD);
+}
+
+/**
+ * Called by itnim to clean up IO while going offline.
+ */
+void
+bfa_ioim_cleanup(struct bfa_ioim_s *ioim)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_fcpim_stats(ioim->fcpim, io_cleanups);
+
+	ioim->iosp->tskim = NULL;
+	bfa_sm_send_event(ioim, BFA_IOIM_SM_CLEANUP);
+}
+
+void
+bfa_ioim_cleanup_tm(struct bfa_ioim_s *ioim, struct bfa_tskim_s *tskim)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_fcpim_stats(ioim->fcpim, io_tmaborts);
+
+	ioim->iosp->tskim = tskim;
+	bfa_sm_send_event(ioim, BFA_IOIM_SM_CLEANUP);
+}
+
+/**
+ * IOC failure handling.
+ */
+void
+bfa_ioim_iocdisable(struct bfa_ioim_s *ioim)
+{
+	bfa_sm_send_event(ioim, BFA_IOIM_SM_HWFAIL);
+}
+
+/**
+ * IO offline TOV popped. Fail the pending IO.
+ */
+void
+bfa_ioim_tov(struct bfa_ioim_s *ioim)
+{
+	bfa_sm_send_event(ioim, BFA_IOIM_SM_IOTOV);
+}
+
+
+
+/**
+ *  bfa_ioim_api
+ */
+
+/**
+ * Allocate IOIM resource for initiator mode I/O request.
+ */
+struct bfa_ioim_s *
+bfa_ioim_alloc(struct bfa_s *bfa, struct bfad_ioim_s *dio,
+		struct bfa_itnim_s *itnim, u16 nsges)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+	struct bfa_ioim_s *ioim;
+
+	/**
+	 * alocate IOIM resource
+	 */
+	bfa_q_deq(&fcpim->ioim_free_q, &ioim);
+	if (!ioim) {
+		bfa_fcpim_stats(fcpim, no_iotags);
+		return NULL;
+	}
+
+	ioim->dio = dio;
+	ioim->itnim = itnim;
+	ioim->nsges = nsges;
+	ioim->nsgpgs = 0;
+
+	bfa_stats(fcpim, total_ios);
+	bfa_stats(itnim, ios);
+	fcpim->ios_active++;
+
+	list_add_tail(&ioim->qe, &itnim->io_q);
+	bfa_trc_fp(ioim->bfa, ioim->iotag);
+
+	return ioim;
+}
+
+void
+bfa_ioim_free(struct bfa_ioim_s *ioim)
+{
+	struct bfa_fcpim_mod_s *fcpim = ioim->fcpim;
+
+	bfa_trc_fp(ioim->bfa, ioim->iotag);
+	bfa_assert_fp(bfa_sm_cmp_state(ioim, bfa_ioim_sm_uninit));
+
+	bfa_assert_fp(list_empty(&ioim->sgpg_q)
+		   || (ioim->nsges > BFI_SGE_INLINE));
+
+	if (ioim->nsgpgs > 0)
+		bfa_sgpg_mfree(ioim->bfa, &ioim->sgpg_q, ioim->nsgpgs);
+
+	bfa_stats(ioim->itnim, io_comps);
+	fcpim->ios_active--;
+
+	list_del(&ioim->qe);
+	list_add_tail(&ioim->qe, &fcpim->ioim_free_q);
+}
+
+void
+bfa_ioim_start(struct bfa_ioim_s *ioim)
+{
+	bfa_trc_fp(ioim->bfa, ioim->iotag);
+	bfa_sm_send_event(ioim, BFA_IOIM_SM_START);
+}
+
+/**
+ * Driver I/O abort request.
+ */
+void
+bfa_ioim_abort(struct bfa_ioim_s *ioim)
+{
+	bfa_trc(ioim->bfa, ioim->iotag);
+	bfa_fcpim_stats(ioim->fcpim, io_aborts);
+	bfa_sm_send_event(ioim, BFA_IOIM_SM_ABORT);
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_itnim.c b/drivers/scsi/bfa/bfa_itnim.c
new file mode 100644
index 000000000000..4d5c61a4f85c
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_itnim.c
@@ -0,0 +1,1088 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_fcpim.h>
+#include "bfa_fcpim_priv.h"
+
+BFA_TRC_FILE(HAL, ITNIM);
+
+#define BFA_ITNIM_FROM_TAG(_fcpim, _tag)				\
+	((_fcpim)->itnim_arr + ((_tag) & ((_fcpim)->num_itnims - 1)))
+
+#define bfa_fcpim_additn(__itnim)					\
+	list_add_tail(&(__itnim)->qe, &(__itnim)->fcpim->itnim_q)
+#define bfa_fcpim_delitn(__itnim)	do {				\
+	bfa_assert(bfa_q_is_on_q(&(__itnim)->fcpim->itnim_q, __itnim));      \
+	list_del(&(__itnim)->qe);      \
+	bfa_assert(list_empty(&(__itnim)->io_q));      \
+	bfa_assert(list_empty(&(__itnim)->io_cleanup_q));      \
+	bfa_assert(list_empty(&(__itnim)->pending_q));      \
+} while (0)
+
+#define bfa_itnim_online_cb(__itnim) do {				\
+	if ((__itnim)->bfa->fcs)					\
+		bfa_cb_itnim_online((__itnim)->ditn);      \
+	else {								\
+		bfa_cb_queue((__itnim)->bfa, &(__itnim)->hcb_qe,	\
+		__bfa_cb_itnim_online, (__itnim));      \
+	}								\
+} while (0)
+
+#define bfa_itnim_offline_cb(__itnim) do {				\
+	if ((__itnim)->bfa->fcs)					\
+		bfa_cb_itnim_offline((__itnim)->ditn);      \
+	else {								\
+		bfa_cb_queue((__itnim)->bfa, &(__itnim)->hcb_qe,	\
+		__bfa_cb_itnim_offline, (__itnim));      \
+	}								\
+} while (0)
+
+#define bfa_itnim_sler_cb(__itnim) do {					\
+	if ((__itnim)->bfa->fcs)					\
+		bfa_cb_itnim_sler((__itnim)->ditn);      \
+	else {								\
+		bfa_cb_queue((__itnim)->bfa, &(__itnim)->hcb_qe,	\
+		__bfa_cb_itnim_sler, (__itnim));      \
+	}								\
+} while (0)
+
+/*
+ * forward declarations
+ */
+static void     bfa_itnim_iocdisable_cleanup(struct bfa_itnim_s *itnim);
+static bfa_boolean_t bfa_itnim_send_fwcreate(struct bfa_itnim_s *itnim);
+static bfa_boolean_t bfa_itnim_send_fwdelete(struct bfa_itnim_s *itnim);
+static void     bfa_itnim_cleanp_comp(void *itnim_cbarg);
+static void     bfa_itnim_cleanup(struct bfa_itnim_s *itnim);
+static void     __bfa_cb_itnim_online(void *cbarg, bfa_boolean_t complete);
+static void     __bfa_cb_itnim_offline(void *cbarg, bfa_boolean_t complete);
+static void     __bfa_cb_itnim_sler(void *cbarg, bfa_boolean_t complete);
+static void     bfa_itnim_iotov_online(struct bfa_itnim_s *itnim);
+static void     bfa_itnim_iotov_cleanup(struct bfa_itnim_s *itnim);
+static void     bfa_itnim_iotov(void *itnim_arg);
+static void     bfa_itnim_iotov_start(struct bfa_itnim_s *itnim);
+static void     bfa_itnim_iotov_stop(struct bfa_itnim_s *itnim);
+static void     bfa_itnim_iotov_delete(struct bfa_itnim_s *itnim);
+
+/**
+ *  bfa_itnim_sm BFA itnim state machine
+ */
+
+
+enum bfa_itnim_event {
+	BFA_ITNIM_SM_CREATE = 1,	/*  itnim is created */
+	BFA_ITNIM_SM_ONLINE = 2,	/*  itnim is online */
+	BFA_ITNIM_SM_OFFLINE = 3,	/*  itnim is offline */
+	BFA_ITNIM_SM_FWRSP = 4,		/*  firmware response */
+	BFA_ITNIM_SM_DELETE = 5,	/*  deleting an existing itnim */
+	BFA_ITNIM_SM_CLEANUP = 6,	/*  IO cleanup completion */
+	BFA_ITNIM_SM_SLER = 7,		/*  second level error recovery */
+	BFA_ITNIM_SM_HWFAIL = 8,	/*  IOC h/w failure event */
+	BFA_ITNIM_SM_QRESUME = 9,	/*  queue space available */
+};
+
+static void     bfa_itnim_sm_uninit(struct bfa_itnim_s *itnim,
+					enum bfa_itnim_event event);
+static void     bfa_itnim_sm_created(struct bfa_itnim_s *itnim,
+					 enum bfa_itnim_event event);
+static void     bfa_itnim_sm_fwcreate(struct bfa_itnim_s *itnim,
+					  enum bfa_itnim_event event);
+static void	bfa_itnim_sm_delete_pending(struct bfa_itnim_s *itnim,
+				enum bfa_itnim_event event);
+static void     bfa_itnim_sm_online(struct bfa_itnim_s *itnim,
+					enum bfa_itnim_event event);
+static void     bfa_itnim_sm_sler(struct bfa_itnim_s *itnim,
+				      enum bfa_itnim_event event);
+static void     bfa_itnim_sm_cleanup_offline(struct bfa_itnim_s *itnim,
+						 enum bfa_itnim_event event);
+static void     bfa_itnim_sm_cleanup_delete(struct bfa_itnim_s *itnim,
+						enum bfa_itnim_event event);
+static void     bfa_itnim_sm_fwdelete(struct bfa_itnim_s *itnim,
+					  enum bfa_itnim_event event);
+static void     bfa_itnim_sm_offline(struct bfa_itnim_s *itnim,
+					 enum bfa_itnim_event event);
+static void     bfa_itnim_sm_iocdisable(struct bfa_itnim_s *itnim,
+					    enum bfa_itnim_event event);
+static void     bfa_itnim_sm_deleting(struct bfa_itnim_s *itnim,
+					  enum bfa_itnim_event event);
+static void     bfa_itnim_sm_fwcreate_qfull(struct bfa_itnim_s *itnim,
+					  enum bfa_itnim_event event);
+static void     bfa_itnim_sm_fwdelete_qfull(struct bfa_itnim_s *itnim,
+					  enum bfa_itnim_event event);
+static void     bfa_itnim_sm_deleting_qfull(struct bfa_itnim_s *itnim,
+					  enum bfa_itnim_event event);
+
+/**
+ * 		Beginning/unallocated state - no events expected.
+ */
+static void
+bfa_itnim_sm_uninit(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_CREATE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_created);
+		itnim->is_online = BFA_FALSE;
+		bfa_fcpim_additn(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Beginning state, only online event expected.
+ */
+static void
+bfa_itnim_sm_created(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_ONLINE:
+		if (bfa_itnim_send_fwcreate(itnim))
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate);
+		else
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate_qfull);
+		break;
+
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+		bfa_fcpim_delitn(itnim);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Waiting for itnim create response from firmware.
+ */
+static void
+bfa_itnim_sm_fwcreate(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_FWRSP:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_online);
+		itnim->is_online = BFA_TRUE;
+		bfa_itnim_iotov_online(itnim);
+		bfa_itnim_online_cb(itnim);
+		break;
+
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_delete_pending);
+		break;
+
+	case BFA_ITNIM_SM_OFFLINE:
+		if (bfa_itnim_send_fwdelete(itnim))
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete);
+		else
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete_qfull);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_itnim_sm_fwcreate_qfull(struct bfa_itnim_s *itnim,
+			enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_QRESUME:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate);
+		bfa_itnim_send_fwcreate(itnim);
+		break;
+
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+		bfa_reqq_wcancel(&itnim->reqq_wait);
+		bfa_fcpim_delitn(itnim);
+		break;
+
+	case BFA_ITNIM_SM_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_offline);
+		bfa_reqq_wcancel(&itnim->reqq_wait);
+		bfa_itnim_offline_cb(itnim);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		bfa_reqq_wcancel(&itnim->reqq_wait);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 	Waiting for itnim create response from firmware, a delete is pending.
+ */
+static void
+bfa_itnim_sm_delete_pending(struct bfa_itnim_s *itnim,
+				enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_FWRSP:
+		if (bfa_itnim_send_fwdelete(itnim))
+			bfa_sm_set_state(itnim, bfa_itnim_sm_deleting);
+		else
+			bfa_sm_set_state(itnim, bfa_itnim_sm_deleting_qfull);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+		bfa_fcpim_delitn(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Online state - normal parking state.
+ */
+static void
+bfa_itnim_sm_online(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_offline);
+		itnim->is_online = BFA_FALSE;
+		bfa_itnim_iotov_start(itnim);
+		bfa_itnim_cleanup(itnim);
+		break;
+
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_delete);
+		itnim->is_online = BFA_FALSE;
+		bfa_itnim_cleanup(itnim);
+		break;
+
+	case BFA_ITNIM_SM_SLER:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_sler);
+		itnim->is_online = BFA_FALSE;
+		bfa_itnim_iotov_start(itnim);
+		bfa_itnim_sler_cb(itnim);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		itnim->is_online = BFA_FALSE;
+		bfa_itnim_iotov_start(itnim);
+		bfa_itnim_iocdisable_cleanup(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Second level error recovery need.
+ */
+static void
+bfa_itnim_sm_sler(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_offline);
+		bfa_itnim_cleanup(itnim);
+		break;
+
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_delete);
+		bfa_itnim_cleanup(itnim);
+		bfa_itnim_iotov_delete(itnim);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		bfa_itnim_iocdisable_cleanup(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Going offline. Waiting for active IO cleanup.
+ */
+static void
+bfa_itnim_sm_cleanup_offline(struct bfa_itnim_s *itnim,
+				 enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_CLEANUP:
+		if (bfa_itnim_send_fwdelete(itnim))
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete);
+		else
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete_qfull);
+		break;
+
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_delete);
+		bfa_itnim_iotov_delete(itnim);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		bfa_itnim_iocdisable_cleanup(itnim);
+		bfa_itnim_offline_cb(itnim);
+		break;
+
+	case BFA_ITNIM_SM_SLER:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Deleting itnim. Waiting for active IO cleanup.
+ */
+static void
+bfa_itnim_sm_cleanup_delete(struct bfa_itnim_s *itnim,
+				enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_CLEANUP:
+		if (bfa_itnim_send_fwdelete(itnim))
+			bfa_sm_set_state(itnim, bfa_itnim_sm_deleting);
+		else
+			bfa_sm_set_state(itnim, bfa_itnim_sm_deleting_qfull);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		bfa_itnim_iocdisable_cleanup(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Rport offline. Fimrware itnim is being deleted - awaiting f/w response.
+ */
+static void
+bfa_itnim_sm_fwdelete(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_FWRSP:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_offline);
+		bfa_itnim_offline_cb(itnim);
+		break;
+
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_deleting);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		bfa_itnim_offline_cb(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_itnim_sm_fwdelete_qfull(struct bfa_itnim_s *itnim,
+			enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_QRESUME:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete);
+		bfa_itnim_send_fwdelete(itnim);
+		break;
+
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_deleting_qfull);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		bfa_reqq_wcancel(&itnim->reqq_wait);
+		bfa_itnim_offline_cb(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Offline state.
+ */
+static void
+bfa_itnim_sm_offline(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+		bfa_itnim_iotov_delete(itnim);
+		bfa_fcpim_delitn(itnim);
+		break;
+
+	case BFA_ITNIM_SM_ONLINE:
+		if (bfa_itnim_send_fwcreate(itnim))
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate);
+		else
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate_qfull);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		IOC h/w failed state.
+ */
+static void
+bfa_itnim_sm_iocdisable(struct bfa_itnim_s *itnim,
+			    enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+		bfa_itnim_iotov_delete(itnim);
+		bfa_fcpim_delitn(itnim);
+		break;
+
+	case BFA_ITNIM_SM_OFFLINE:
+		bfa_itnim_offline_cb(itnim);
+		break;
+
+	case BFA_ITNIM_SM_ONLINE:
+		if (bfa_itnim_send_fwcreate(itnim))
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate);
+		else
+			bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate_qfull);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Itnim is deleted, waiting for firmware response to delete.
+ */
+static void
+bfa_itnim_sm_deleting(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_FWRSP:
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+		bfa_fcpim_delitn(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_itnim_sm_deleting_qfull(struct bfa_itnim_s *itnim,
+			enum bfa_itnim_event event)
+{
+	bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+	bfa_trc(itnim->bfa, event);
+
+	switch (event) {
+	case BFA_ITNIM_SM_QRESUME:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_deleting);
+		bfa_itnim_send_fwdelete(itnim);
+		break;
+
+	case BFA_ITNIM_SM_HWFAIL:
+		bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+		bfa_reqq_wcancel(&itnim->reqq_wait);
+		bfa_fcpim_delitn(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  bfa_itnim_private
+ */
+
+/**
+ * 		Initiate cleanup of all IOs on an IOC failure.
+ */
+static void
+bfa_itnim_iocdisable_cleanup(struct bfa_itnim_s *itnim)
+{
+	struct bfa_tskim_s *tskim;
+	struct bfa_ioim_s *ioim;
+	struct list_head        *qe, *qen;
+
+	list_for_each_safe(qe, qen, &itnim->tsk_q) {
+		tskim = (struct bfa_tskim_s *) qe;
+		bfa_tskim_iocdisable(tskim);
+	}
+
+	list_for_each_safe(qe, qen, &itnim->io_q) {
+		ioim = (struct bfa_ioim_s *) qe;
+		bfa_ioim_iocdisable(ioim);
+	}
+
+	/**
+	 * For IO request in pending queue, we pretend an early timeout.
+	 */
+	list_for_each_safe(qe, qen, &itnim->pending_q) {
+		ioim = (struct bfa_ioim_s *) qe;
+		bfa_ioim_tov(ioim);
+	}
+
+	list_for_each_safe(qe, qen, &itnim->io_cleanup_q) {
+		ioim = (struct bfa_ioim_s *) qe;
+		bfa_ioim_iocdisable(ioim);
+	}
+}
+
+/**
+ * 		IO cleanup completion
+ */
+static void
+bfa_itnim_cleanp_comp(void *itnim_cbarg)
+{
+	struct bfa_itnim_s *itnim = itnim_cbarg;
+
+	bfa_stats(itnim, cleanup_comps);
+	bfa_sm_send_event(itnim, BFA_ITNIM_SM_CLEANUP);
+}
+
+/**
+ * 		Initiate cleanup of all IOs.
+ */
+static void
+bfa_itnim_cleanup(struct bfa_itnim_s *itnim)
+{
+	struct bfa_ioim_s  *ioim;
+	struct bfa_tskim_s *tskim;
+	struct list_head         *qe, *qen;
+
+	bfa_wc_init(&itnim->wc, bfa_itnim_cleanp_comp, itnim);
+
+	list_for_each_safe(qe, qen, &itnim->io_q) {
+		ioim = (struct bfa_ioim_s *) qe;
+
+		/**
+		 * Move IO to a cleanup queue from active queue so that a later
+		 * TM will not pickup this IO.
+		 */
+		list_del(&ioim->qe);
+		list_add_tail(&ioim->qe, &itnim->io_cleanup_q);
+
+		bfa_wc_up(&itnim->wc);
+		bfa_ioim_cleanup(ioim);
+	}
+
+	list_for_each_safe(qe, qen, &itnim->tsk_q) {
+		tskim = (struct bfa_tskim_s *) qe;
+		bfa_wc_up(&itnim->wc);
+		bfa_tskim_cleanup(tskim);
+	}
+
+	bfa_wc_wait(&itnim->wc);
+}
+
+static void
+__bfa_cb_itnim_online(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_itnim_s *itnim = cbarg;
+
+	if (complete)
+		bfa_cb_itnim_online(itnim->ditn);
+}
+
+static void
+__bfa_cb_itnim_offline(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_itnim_s *itnim = cbarg;
+
+	if (complete)
+		bfa_cb_itnim_offline(itnim->ditn);
+}
+
+static void
+__bfa_cb_itnim_sler(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_itnim_s *itnim = cbarg;
+
+	if (complete)
+		bfa_cb_itnim_sler(itnim->ditn);
+}
+
+/**
+ * Call to resume any I/O requests waiting for room in request queue.
+ */
+static void
+bfa_itnim_qresume(void *cbarg)
+{
+	struct bfa_itnim_s *itnim = cbarg;
+
+	bfa_sm_send_event(itnim, BFA_ITNIM_SM_QRESUME);
+}
+
+
+
+
+/**
+ *  bfa_itnim_public
+ */
+
+void
+bfa_itnim_iodone(struct bfa_itnim_s *itnim)
+{
+	bfa_wc_down(&itnim->wc);
+}
+
+void
+bfa_itnim_tskdone(struct bfa_itnim_s *itnim)
+{
+	bfa_wc_down(&itnim->wc);
+}
+
+void
+bfa_itnim_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+		u32 *dm_len)
+{
+	/**
+	 * ITN memory
+	 */
+	*km_len += cfg->fwcfg.num_rports * sizeof(struct bfa_itnim_s);
+}
+
+void
+bfa_itnim_attach(struct bfa_fcpim_mod_s *fcpim, struct bfa_meminfo_s *minfo)
+{
+	struct bfa_s      *bfa = fcpim->bfa;
+	struct bfa_itnim_s *itnim;
+	int             i;
+
+	INIT_LIST_HEAD(&fcpim->itnim_q);
+
+	itnim = (struct bfa_itnim_s *) bfa_meminfo_kva(minfo);
+	fcpim->itnim_arr = itnim;
+
+	for (i = 0; i < fcpim->num_itnims; i++, itnim++) {
+		bfa_os_memset(itnim, 0, sizeof(struct bfa_itnim_s));
+		itnim->bfa = bfa;
+		itnim->fcpim = fcpim;
+		itnim->reqq = BFA_REQQ_QOS_LO;
+		itnim->rport = BFA_RPORT_FROM_TAG(bfa, i);
+		itnim->iotov_active = BFA_FALSE;
+		bfa_reqq_winit(&itnim->reqq_wait, bfa_itnim_qresume, itnim);
+
+		INIT_LIST_HEAD(&itnim->io_q);
+		INIT_LIST_HEAD(&itnim->io_cleanup_q);
+		INIT_LIST_HEAD(&itnim->pending_q);
+		INIT_LIST_HEAD(&itnim->tsk_q);
+		INIT_LIST_HEAD(&itnim->delay_comp_q);
+		bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+	}
+
+	bfa_meminfo_kva(minfo) = (u8 *) itnim;
+}
+
+void
+bfa_itnim_iocdisable(struct bfa_itnim_s *itnim)
+{
+	bfa_stats(itnim, ioc_disabled);
+	bfa_sm_send_event(itnim, BFA_ITNIM_SM_HWFAIL);
+}
+
+static bfa_boolean_t
+bfa_itnim_send_fwcreate(struct bfa_itnim_s *itnim)
+{
+	struct bfi_itnim_create_req_s *m;
+
+	itnim->msg_no++;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(itnim->bfa, itnim->reqq);
+	if (!m) {
+		bfa_reqq_wait(itnim->bfa, itnim->reqq, &itnim->reqq_wait);
+		return BFA_FALSE;
+	}
+
+	bfi_h2i_set(m->mh, BFI_MC_ITNIM, BFI_ITNIM_H2I_CREATE_REQ,
+			bfa_lpuid(itnim->bfa));
+	m->fw_handle = itnim->rport->fw_handle;
+	m->class = FC_CLASS_3;
+	m->seq_rec = itnim->seq_rec;
+	m->msg_no = itnim->msg_no;
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(itnim->bfa, itnim->reqq);
+	return BFA_TRUE;
+}
+
+static bfa_boolean_t
+bfa_itnim_send_fwdelete(struct bfa_itnim_s *itnim)
+{
+	struct bfi_itnim_delete_req_s *m;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(itnim->bfa, itnim->reqq);
+	if (!m) {
+		bfa_reqq_wait(itnim->bfa, itnim->reqq, &itnim->reqq_wait);
+		return BFA_FALSE;
+	}
+
+	bfi_h2i_set(m->mh, BFI_MC_ITNIM, BFI_ITNIM_H2I_DELETE_REQ,
+			bfa_lpuid(itnim->bfa));
+	m->fw_handle = itnim->rport->fw_handle;
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(itnim->bfa, itnim->reqq);
+	return BFA_TRUE;
+}
+
+/**
+ * Cleanup all pending failed inflight requests.
+ */
+static void
+bfa_itnim_delayed_comp(struct bfa_itnim_s *itnim, bfa_boolean_t iotov)
+{
+	struct bfa_ioim_s *ioim;
+	struct list_head *qe, *qen;
+
+	list_for_each_safe(qe, qen, &itnim->delay_comp_q) {
+		ioim = (struct bfa_ioim_s *)qe;
+		bfa_ioim_delayed_comp(ioim, iotov);
+	}
+}
+
+/**
+ * Start all pending IO requests.
+ */
+static void
+bfa_itnim_iotov_online(struct bfa_itnim_s *itnim)
+{
+	struct bfa_ioim_s *ioim;
+
+	bfa_itnim_iotov_stop(itnim);
+
+	/**
+	 * Abort all inflight IO requests in the queue
+	 */
+	bfa_itnim_delayed_comp(itnim, BFA_FALSE);
+
+	/**
+	 * Start all pending IO requests.
+	 */
+	while (!list_empty(&itnim->pending_q)) {
+		bfa_q_deq(&itnim->pending_q, &ioim);
+		list_add_tail(&ioim->qe, &itnim->io_q);
+		bfa_ioim_start(ioim);
+	}
+}
+
+/**
+ * Fail all pending IO requests
+ */
+static void
+bfa_itnim_iotov_cleanup(struct bfa_itnim_s *itnim)
+{
+	struct bfa_ioim_s *ioim;
+
+	/**
+	 * Fail all inflight IO requests in the queue
+	 */
+	bfa_itnim_delayed_comp(itnim, BFA_TRUE);
+
+	/**
+	 * Fail any pending IO requests.
+	 */
+	while (!list_empty(&itnim->pending_q)) {
+		bfa_q_deq(&itnim->pending_q, &ioim);
+		list_add_tail(&ioim->qe, &ioim->fcpim->ioim_comp_q);
+		bfa_ioim_tov(ioim);
+	}
+}
+
+/**
+ * IO TOV timer callback. Fail any pending IO requests.
+ */
+static void
+bfa_itnim_iotov(void *itnim_arg)
+{
+	struct bfa_itnim_s *itnim = itnim_arg;
+
+	itnim->iotov_active = BFA_FALSE;
+
+	bfa_cb_itnim_tov_begin(itnim->ditn);
+	bfa_itnim_iotov_cleanup(itnim);
+	bfa_cb_itnim_tov(itnim->ditn);
+}
+
+/**
+ * Start IO TOV timer for failing back pending IO requests in offline state.
+ */
+static void
+bfa_itnim_iotov_start(struct bfa_itnim_s *itnim)
+{
+	if (itnim->fcpim->path_tov > 0) {
+
+		itnim->iotov_active = BFA_TRUE;
+		bfa_assert(bfa_itnim_hold_io(itnim));
+		bfa_timer_start(itnim->bfa, &itnim->timer,
+			bfa_itnim_iotov, itnim, itnim->fcpim->path_tov);
+	}
+}
+
+/**
+ * Stop IO TOV timer.
+ */
+static void
+bfa_itnim_iotov_stop(struct bfa_itnim_s *itnim)
+{
+	if (itnim->iotov_active) {
+		itnim->iotov_active = BFA_FALSE;
+		bfa_timer_stop(&itnim->timer);
+	}
+}
+
+/**
+ * Stop IO TOV timer.
+ */
+static void
+bfa_itnim_iotov_delete(struct bfa_itnim_s *itnim)
+{
+    bfa_boolean_t pathtov_active = BFA_FALSE;
+
+    if (itnim->iotov_active)
+		pathtov_active = BFA_TRUE;
+
+	bfa_itnim_iotov_stop(itnim);
+	if (pathtov_active)
+		bfa_cb_itnim_tov_begin(itnim->ditn);
+	bfa_itnim_iotov_cleanup(itnim);
+	if (pathtov_active)
+		bfa_cb_itnim_tov(itnim->ditn);
+}
+
+
+
+/**
+ *  bfa_itnim_public
+ */
+
+/**
+ * 		Itnim interrupt processing.
+ */
+void
+bfa_itnim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+	union bfi_itnim_i2h_msg_u msg;
+	struct bfa_itnim_s *itnim;
+
+	bfa_trc(bfa, m->mhdr.msg_id);
+
+	msg.msg = m;
+
+	switch (m->mhdr.msg_id) {
+	case BFI_ITNIM_I2H_CREATE_RSP:
+		itnim = BFA_ITNIM_FROM_TAG(fcpim,
+					       msg.create_rsp->bfa_handle);
+		bfa_assert(msg.create_rsp->status == BFA_STATUS_OK);
+		bfa_stats(itnim, create_comps);
+		bfa_sm_send_event(itnim, BFA_ITNIM_SM_FWRSP);
+		break;
+
+	case BFI_ITNIM_I2H_DELETE_RSP:
+		itnim = BFA_ITNIM_FROM_TAG(fcpim,
+					       msg.delete_rsp->bfa_handle);
+		bfa_assert(msg.delete_rsp->status == BFA_STATUS_OK);
+		bfa_stats(itnim, delete_comps);
+		bfa_sm_send_event(itnim, BFA_ITNIM_SM_FWRSP);
+		break;
+
+	case BFI_ITNIM_I2H_SLER_EVENT:
+		itnim = BFA_ITNIM_FROM_TAG(fcpim,
+					       msg.sler_event->bfa_handle);
+		bfa_stats(itnim, sler_events);
+		bfa_sm_send_event(itnim, BFA_ITNIM_SM_SLER);
+		break;
+
+	default:
+		bfa_trc(bfa, m->mhdr.msg_id);
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  bfa_itnim_api
+ */
+
+struct bfa_itnim_s *
+bfa_itnim_create(struct bfa_s *bfa, struct bfa_rport_s *rport, void *ditn)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+	struct bfa_itnim_s *itnim;
+
+	itnim = BFA_ITNIM_FROM_TAG(fcpim, rport->rport_tag);
+	bfa_assert(itnim->rport == rport);
+
+	itnim->ditn = ditn;
+
+	bfa_stats(itnim, creates);
+	bfa_sm_send_event(itnim, BFA_ITNIM_SM_CREATE);
+
+	return (itnim);
+}
+
+void
+bfa_itnim_delete(struct bfa_itnim_s *itnim)
+{
+	bfa_stats(itnim, deletes);
+	bfa_sm_send_event(itnim, BFA_ITNIM_SM_DELETE);
+}
+
+void
+bfa_itnim_online(struct bfa_itnim_s *itnim, bfa_boolean_t seq_rec)
+{
+	itnim->seq_rec = seq_rec;
+	bfa_stats(itnim, onlines);
+	bfa_sm_send_event(itnim, BFA_ITNIM_SM_ONLINE);
+}
+
+void
+bfa_itnim_offline(struct bfa_itnim_s *itnim)
+{
+	bfa_stats(itnim, offlines);
+	bfa_sm_send_event(itnim, BFA_ITNIM_SM_OFFLINE);
+}
+
+/**
+ * Return true if itnim is considered offline for holding off IO request.
+ * IO is not held if itnim is being deleted.
+ */
+bfa_boolean_t
+bfa_itnim_hold_io(struct bfa_itnim_s *itnim)
+{
+	return (
+		itnim->fcpim->path_tov && itnim->iotov_active &&
+		(bfa_sm_cmp_state(itnim, bfa_itnim_sm_fwcreate) ||
+		 bfa_sm_cmp_state(itnim, bfa_itnim_sm_sler) ||
+		 bfa_sm_cmp_state(itnim, bfa_itnim_sm_cleanup_offline) ||
+		 bfa_sm_cmp_state(itnim, bfa_itnim_sm_fwdelete) ||
+		 bfa_sm_cmp_state(itnim, bfa_itnim_sm_offline) ||
+		 bfa_sm_cmp_state(itnim, bfa_itnim_sm_iocdisable))
+);
+}
+
+void
+bfa_itnim_get_stats(struct bfa_itnim_s *itnim,
+	struct bfa_itnim_hal_stats_s *stats)
+{
+	*stats = itnim->stats;
+}
+
+void
+bfa_itnim_clear_stats(struct bfa_itnim_s *itnim)
+{
+	bfa_os_memset(&itnim->stats, 0, sizeof(itnim->stats));
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_log.c b/drivers/scsi/bfa/bfa_log.c
new file mode 100644
index 000000000000..c2735e55cf03
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_log.c
@@ -0,0 +1,346 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_log.c BFA log library
+ */
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_log.h>
+
+/*
+ * global log info structure
+ */
+struct bfa_log_info_s {
+	u32        start_idx;	/*  start index for a module */
+	u32        total_count;	/*  total count for a module */
+	enum bfa_log_severity level;	/*  global log level */
+	bfa_log_cb_t	cbfn;		/*  callback function */
+};
+
+static struct bfa_log_info_s bfa_log_info[BFA_LOG_MODULE_ID_MAX + 1];
+static u32 bfa_log_msg_total_count;
+static int      bfa_log_initialized;
+
+static char    *bfa_log_severity[] =
+	{ "[none]", "[critical]", "[error]", "[warn]", "[info]", "" };
+
+/**
+ * BFA log library initialization
+ *
+ * The log library initialization includes the following,
+ *    - set log instance name and callback function
+ *    - read the message array generated from xml files
+ *    - calculate start index for each module
+ *    - calculate message count for each module
+ *    - perform error checking
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] instance_name - instance name
+ * @param[in] cbfn - callback function
+ *
+ * It return 0 on success, or -1 on failure
+ */
+int
+bfa_log_init(struct bfa_log_mod_s *log_mod, char *instance_name,
+			bfa_log_cb_t cbfn)
+{
+	struct bfa_log_msgdef_s *msg;
+	u32        pre_mod_id = 0;
+	u32        cur_mod_id = 0;
+	u32        i, pre_idx, idx, msg_id;
+
+	/*
+	 * set instance name
+	 */
+	if (log_mod) {
+		strncpy(log_mod->instance_info, instance_name,
+			sizeof(log_mod->instance_info));
+		log_mod->cbfn = cbfn;
+		for (i = 0; i <= BFA_LOG_MODULE_ID_MAX; i++)
+			log_mod->log_level[i] = BFA_LOG_WARNING;
+	}
+
+	if (bfa_log_initialized)
+		return 0;
+
+	for (i = 0; i <= BFA_LOG_MODULE_ID_MAX; i++) {
+		bfa_log_info[i].start_idx = 0;
+		bfa_log_info[i].total_count = 0;
+		bfa_log_info[i].level = BFA_LOG_WARNING;
+		bfa_log_info[i].cbfn = cbfn;
+	}
+
+	pre_idx = 0;
+	idx = 0;
+	msg = bfa_log_msg_array;
+	msg_id = BFA_LOG_GET_MSG_ID(msg);
+	pre_mod_id = BFA_LOG_GET_MOD_ID(msg_id);
+	while (msg_id != 0) {
+		cur_mod_id = BFA_LOG_GET_MOD_ID(msg_id);
+
+		if (cur_mod_id > BFA_LOG_MODULE_ID_MAX) {
+			cbfn(log_mod, msg_id,
+				"%s%s log: module id %u out of range\n",
+				BFA_LOG_CAT_NAME,
+				bfa_log_severity[BFA_LOG_ERROR],
+				cur_mod_id);
+			return -1;
+		}
+
+		if (pre_mod_id > BFA_LOG_MODULE_ID_MAX) {
+			cbfn(log_mod, msg_id,
+				"%s%s log: module id %u out of range\n",
+				BFA_LOG_CAT_NAME,
+				bfa_log_severity[BFA_LOG_ERROR],
+				pre_mod_id);
+			return -1;
+		}
+
+		if (cur_mod_id != pre_mod_id) {
+			bfa_log_info[pre_mod_id].start_idx = pre_idx;
+			bfa_log_info[pre_mod_id].total_count = idx - pre_idx;
+			pre_mod_id = cur_mod_id;
+			pre_idx = idx;
+		}
+
+		idx++;
+		msg++;
+		msg_id = BFA_LOG_GET_MSG_ID(msg);
+	}
+
+	bfa_log_info[cur_mod_id].start_idx = pre_idx;
+	bfa_log_info[cur_mod_id].total_count = idx - pre_idx;
+	bfa_log_msg_total_count = idx;
+
+	cbfn(log_mod, msg_id, "%s%s log: init OK, msg total count %u\n",
+		BFA_LOG_CAT_NAME,
+		bfa_log_severity[BFA_LOG_INFO], bfa_log_msg_total_count);
+
+	bfa_log_initialized = 1;
+
+	return 0;
+}
+
+/**
+ * BFA log set log level for a module
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] mod_id - module id
+ * @param[in] log_level - log severity level
+ *
+ * It return BFA_STATUS_OK on success, or > 0 on failure
+ */
+bfa_status_t
+bfa_log_set_level(struct bfa_log_mod_s *log_mod, int mod_id,
+		  enum bfa_log_severity log_level)
+{
+	if (mod_id <= BFA_LOG_UNUSED_ID || mod_id > BFA_LOG_MODULE_ID_MAX)
+		return BFA_STATUS_EINVAL;
+
+	if (log_level <= BFA_LOG_INVALID || log_level > BFA_LOG_LEVEL_MAX)
+		return BFA_STATUS_EINVAL;
+
+	if (log_mod)
+		log_mod->log_level[mod_id] = log_level;
+	else
+		bfa_log_info[mod_id].level = log_level;
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * BFA log set log level for all modules
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] log_level - log severity level
+ *
+ * It return BFA_STATUS_OK on success, or > 0 on failure
+ */
+bfa_status_t
+bfa_log_set_level_all(struct bfa_log_mod_s *log_mod,
+		  enum bfa_log_severity log_level)
+{
+	int mod_id = BFA_LOG_UNUSED_ID + 1;
+
+	if (log_level <= BFA_LOG_INVALID || log_level > BFA_LOG_LEVEL_MAX)
+		return BFA_STATUS_EINVAL;
+
+	if (log_mod) {
+		for (; mod_id <= BFA_LOG_MODULE_ID_MAX; mod_id++)
+			log_mod->log_level[mod_id] = log_level;
+	} else {
+		for (; mod_id <= BFA_LOG_MODULE_ID_MAX; mod_id++)
+			bfa_log_info[mod_id].level = log_level;
+	}
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * BFA log set log level for all aen sub-modules
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] log_level - log severity level
+ *
+ * It return BFA_STATUS_OK on success, or > 0 on failure
+ */
+bfa_status_t
+bfa_log_set_level_aen(struct bfa_log_mod_s *log_mod,
+		  enum bfa_log_severity log_level)
+{
+	int mod_id = BFA_LOG_AEN_MIN + 1;
+
+	if (log_mod) {
+		for (; mod_id <= BFA_LOG_AEN_MAX; mod_id++)
+			log_mod->log_level[mod_id] = log_level;
+	} else {
+		for (; mod_id <= BFA_LOG_AEN_MAX; mod_id++)
+			bfa_log_info[mod_id].level = log_level;
+	}
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * BFA log get log level for a module
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] mod_id - module id
+ *
+ * It returns log level or -1 on error
+ */
+enum bfa_log_severity
+bfa_log_get_level(struct bfa_log_mod_s *log_mod, int mod_id)
+{
+	if (mod_id <= BFA_LOG_UNUSED_ID || mod_id > BFA_LOG_MODULE_ID_MAX)
+		return BFA_LOG_INVALID;
+
+	if (log_mod)
+		return (log_mod->log_level[mod_id]);
+	else
+		return (bfa_log_info[mod_id].level);
+}
+
+enum bfa_log_severity
+bfa_log_get_msg_level(struct bfa_log_mod_s *log_mod, u32 msg_id)
+{
+	struct bfa_log_msgdef_s *msg;
+	u32        mod = BFA_LOG_GET_MOD_ID(msg_id);
+	u32        idx = BFA_LOG_GET_MSG_IDX(msg_id) - 1;
+
+	if (!bfa_log_initialized)
+		return BFA_LOG_INVALID;
+
+	if (mod > BFA_LOG_MODULE_ID_MAX)
+		return BFA_LOG_INVALID;
+
+	if (idx >= bfa_log_info[mod].total_count) {
+		bfa_log_info[mod].cbfn(log_mod, msg_id,
+			"%s%s log: inconsistent idx %u vs. total count %u\n",
+			BFA_LOG_CAT_NAME, bfa_log_severity[BFA_LOG_ERROR], idx,
+			bfa_log_info[mod].total_count);
+		return BFA_LOG_INVALID;
+	}
+
+	msg = bfa_log_msg_array + bfa_log_info[mod].start_idx + idx;
+	if (msg_id != BFA_LOG_GET_MSG_ID(msg)) {
+		bfa_log_info[mod].cbfn(log_mod, msg_id,
+			"%s%s log: inconsistent msg id %u array msg id %u\n",
+			BFA_LOG_CAT_NAME, bfa_log_severity[BFA_LOG_ERROR],
+			msg_id, BFA_LOG_GET_MSG_ID(msg));
+		return BFA_LOG_INVALID;
+	}
+
+	return BFA_LOG_GET_SEVERITY(msg);
+}
+
+/**
+ * BFA log message handling
+ *
+ * BFA log message handling finds the message based on message id and prints
+ * out the message based on its format and arguments. It also does prefix
+ * the severity etc.
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] msg_id - message id
+ * @param[in] ... - message arguments
+ *
+ * It return 0 on success, or -1 on errors
+ */
+int
+bfa_log(struct bfa_log_mod_s *log_mod, u32 msg_id, ...)
+{
+	va_list         ap;
+	char            buf[256];
+	struct bfa_log_msgdef_s *msg;
+	int             log_level;
+	u32        mod = BFA_LOG_GET_MOD_ID(msg_id);
+	u32        idx = BFA_LOG_GET_MSG_IDX(msg_id) - 1;
+
+	if (!bfa_log_initialized)
+		return -1;
+
+	if (mod > BFA_LOG_MODULE_ID_MAX)
+		return -1;
+
+	if (idx >= bfa_log_info[mod].total_count) {
+		bfa_log_info[mod].
+			cbfn
+			(log_mod, msg_id,
+			"%s%s log: inconsistent idx %u vs. total count %u\n",
+			BFA_LOG_CAT_NAME, bfa_log_severity[BFA_LOG_ERROR], idx,
+			bfa_log_info[mod].total_count);
+		return -1;
+	}
+
+	msg = bfa_log_msg_array + bfa_log_info[mod].start_idx + idx;
+	if (msg_id != BFA_LOG_GET_MSG_ID(msg)) {
+		bfa_log_info[mod].
+			cbfn
+			(log_mod, msg_id,
+			"%s%s log: inconsistent msg id %u array msg id %u\n",
+			BFA_LOG_CAT_NAME, bfa_log_severity[BFA_LOG_ERROR],
+			msg_id, BFA_LOG_GET_MSG_ID(msg));
+		return -1;
+	}
+
+	log_level = log_mod ? log_mod->log_level[mod] : bfa_log_info[mod].level;
+	if ((BFA_LOG_GET_SEVERITY(msg) > log_level) &&
+			(msg->attributes != BFA_LOG_ATTR_NONE))
+		return 0;
+
+	va_start(ap, msg_id);
+	bfa_os_vsprintf(buf, BFA_LOG_GET_MSG_FMT_STRING(msg), ap);
+	va_end(ap);
+
+	if (log_mod)
+		log_mod->cbfn(log_mod, msg_id, "%s[%s]%s%s %s: %s\n",
+				BFA_LOG_CAT_NAME, log_mod->instance_info,
+				bfa_log_severity[BFA_LOG_GET_SEVERITY(msg)],
+				(msg->attributes & BFA_LOG_ATTR_AUDIT)
+				? " (audit) " : "", msg->msg_value, buf);
+	else
+		bfa_log_info[mod].cbfn(log_mod, msg_id, "%s%s%s %s: %s\n",
+				BFA_LOG_CAT_NAME,
+				bfa_log_severity[BFA_LOG_GET_SEVERITY(msg)],
+				(msg->attributes & BFA_LOG_ATTR_AUDIT) ?
+				" (audit) " : "", msg->msg_value, buf);
+
+	return 0;
+}
+
diff --git a/drivers/scsi/bfa/bfa_log_module.c b/drivers/scsi/bfa/bfa_log_module.c
new file mode 100644
index 000000000000..5c154d341d69
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_log_module.c
@@ -0,0 +1,451 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <cs/bfa_log.h>
+#include <aen/bfa_aen_adapter.h>
+#include <aen/bfa_aen_audit.h>
+#include <aen/bfa_aen_ethport.h>
+#include <aen/bfa_aen_ioc.h>
+#include <aen/bfa_aen_itnim.h>
+#include <aen/bfa_aen_lport.h>
+#include <aen/bfa_aen_port.h>
+#include <aen/bfa_aen_rport.h>
+#include <log/bfa_log_fcs.h>
+#include <log/bfa_log_hal.h>
+#include <log/bfa_log_linux.h>
+#include <log/bfa_log_wdrv.h>
+
+struct bfa_log_msgdef_s bfa_log_msg_array[] = {
+
+
+/* messages define for BFA_AEN_CAT_ADAPTER Module */
+{BFA_AEN_ADAPTER_ADD, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ADAPTER_ADD",
+ "New adapter found: SN = %s, base port WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_ADAPTER_REMOVE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_ADAPTER_REMOVE",
+ "Adapter removed: SN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_AUDIT Module */
+{BFA_AEN_AUDIT_AUTH_ENABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_AUDIT_AUTH_ENABLE",
+ "Authentication enabled for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_AUDIT_AUTH_DISABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_AUDIT_AUTH_DISABLE",
+ "Authentication disabled for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_ETHPORT Module */
+{BFA_AEN_ETHPORT_LINKUP, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ETHPORT_LINKUP",
+ "Base port ethernet linkup: mac = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_ETHPORT_LINKDOWN, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ETHPORT_LINKDOWN",
+ "Base port ethernet linkdown: mac = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_ETHPORT_ENABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ETHPORT_ENABLE",
+ "Base port ethernet interface enabled: mac = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_ETHPORT_DISABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ETHPORT_DISABLE",
+ "Base port ethernet interface disabled: mac = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_IOC Module */
+{BFA_AEN_IOC_HBGOOD, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_IOC_HBGOOD",
+ "Heart Beat of IOC %d is good.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_IOC_HBFAIL, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_CRITICAL,
+ "BFA_AEN_IOC_HBFAIL",
+ "Heart Beat of IOC %d has failed.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_IOC_ENABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_IOC_ENABLE",
+ "IOC %d is enabled.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_IOC_DISABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_IOC_DISABLE",
+ "IOC %d is disabled.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_IOC_FWMISMATCH, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_CRITICAL, "BFA_AEN_IOC_FWMISMATCH",
+ "Running firmware version is incompatible with the driver version.",
+ (0), 0},
+
+
+
+
+/* messages define for BFA_AEN_CAT_ITNIM Module */
+{BFA_AEN_ITNIM_ONLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ITNIM_ONLINE",
+ "Target (WWN = %s) is online for initiator (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_ITNIM_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ITNIM_OFFLINE",
+ "Target (WWN = %s) offlined by initiator (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_ITNIM_DISCONNECT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_ERROR, "BFA_AEN_ITNIM_DISCONNECT",
+ "Target (WWN = %s) connectivity lost for initiator (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+
+
+
+/* messages define for BFA_AEN_CAT_LPORT Module */
+{BFA_AEN_LPORT_NEW, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_NEW",
+ "New logical port created: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_DELETE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_DELETE",
+ "Logical port deleted: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_ONLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_ONLINE",
+ "Logical port online: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_OFFLINE",
+ "Logical port taken offline: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_DISCONNECT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_ERROR, "BFA_AEN_LPORT_DISCONNECT",
+ "Logical port lost fabric connectivity: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_NEW_PROP, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_NEW_PROP",
+ "New virtual port created using proprietary interface: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_DELETE_PROP, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_LPORT_DELETE_PROP",
+ "Virtual port deleted using proprietary interface: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_NEW_STANDARD, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_LPORT_NEW_STANDARD",
+ "New virtual port created using standard interface: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_DELETE_STANDARD, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_LPORT_DELETE_STANDARD",
+ "Virtual port deleted using standard interface: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_NPIV_DUP_WWN, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_LPORT_NPIV_DUP_WWN",
+ "Virtual port login failed. Duplicate WWN = %s reported by fabric.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_LPORT_NPIV_FABRIC_MAX, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_LPORT_NPIV_FABRIC_MAX",
+ "Virtual port (WWN = %s) login failed. Max NPIV ports already exist in"
+ " fabric/fport.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_LPORT_NPIV_UNKNOWN, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_LPORT_NPIV_UNKNOWN",
+ "Virtual port (WWN = %s) login failed.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_PORT Module */
+{BFA_AEN_PORT_ONLINE, BFA_LOG_ATTR_NONE, BFA_LOG_INFO, "BFA_AEN_PORT_ONLINE",
+ "Base port online: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_WARNING,
+ "BFA_AEN_PORT_OFFLINE",
+ "Base port offline: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_RLIR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_RLIR",
+ "RLIR event not supported.",
+ (0), 0},
+
+{BFA_AEN_PORT_SFP_INSERT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_SFP_INSERT",
+ "New SFP found: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_SFP_REMOVE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_PORT_SFP_REMOVE",
+ "SFP removed: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_SFP_POM, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_WARNING,
+ "BFA_AEN_PORT_SFP_POM",
+ "SFP POM level to %s: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_PORT_ENABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_ENABLE",
+ "Base port enabled: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_DISABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_DISABLE",
+ "Base port disabled: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_AUTH_ON, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_AUTH_ON",
+ "Authentication successful for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_AUTH_OFF, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_ERROR,
+ "BFA_AEN_PORT_AUTH_OFF",
+ "Authentication unsuccessful for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_DISCONNECT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_ERROR,
+ "BFA_AEN_PORT_DISCONNECT",
+ "Base port (WWN = %s) lost fabric connectivity.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_QOS_NEG, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_WARNING,
+ "BFA_AEN_PORT_QOS_NEG",
+ "QOS negotiation failed for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_FABRIC_NAME_CHANGE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_PORT_FABRIC_NAME_CHANGE",
+ "Base port WWN = %s, Fabric WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_PORT_SFP_ACCESS_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_PORT_SFP_ACCESS_ERROR",
+ "SFP access error: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_SFP_UNSUPPORT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_PORT_SFP_UNSUPPORT",
+ "Unsupported SFP found: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_RPORT Module */
+{BFA_AEN_RPORT_ONLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_RPORT_ONLINE",
+ "Remote port (WWN = %s) online for logical port (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_RPORT_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_RPORT_OFFLINE",
+ "Remote port (WWN = %s) offlined by logical port (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_RPORT_DISCONNECT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_ERROR, "BFA_AEN_RPORT_DISCONNECT",
+ "Remote port (WWN = %s) connectivity lost for logical port (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_RPORT_QOS_PRIO, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_RPORT_QOS_PRIO",
+ "QOS priority changed to %s: RPWWN = %s and LPWWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) |
+  (BFA_LOG_S << BFA_LOG_ARG2) | 0), 3},
+
+{BFA_AEN_RPORT_QOS_FLOWID, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_RPORT_QOS_FLOWID",
+ "QOS flow ID changed to %d: RPWWN = %s and LPWWN = %s.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) |
+  (BFA_LOG_S << BFA_LOG_ARG2) | 0), 3},
+
+
+
+
+/* messages define for FCS Module */
+{BFA_LOG_FCS_FABRIC_NOSWITCH, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "FCS_FABRIC_NOSWITCH",
+ "No switched fabric presence is detected.",
+ (0), 0},
+
+{BFA_LOG_FCS_FABRIC_ISOLATED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "FCS_FABRIC_ISOLATED",
+ "Port is isolated due to VF_ID mismatch. PWWN: %s, Port VF_ID: %04x and"
+ " switch port VF_ID: %04x.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_X << BFA_LOG_ARG1) |
+  (BFA_LOG_X << BFA_LOG_ARG2) | 0), 3},
+
+
+
+
+/* messages define for HAL Module */
+{BFA_LOG_HAL_ASSERT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_ERROR,
+ "HAL_ASSERT",
+ "Assertion failure: %s:%d: %s",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+  (BFA_LOG_S << BFA_LOG_ARG2) | 0), 3},
+
+{BFA_LOG_HAL_HEARTBEAT_FAILURE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_CRITICAL, "HAL_HEARTBEAT_FAILURE",
+ "Firmware heartbeat failure at %d",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_HAL_FCPIM_PARM_INVALID, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "HAL_FCPIM_PARM_INVALID",
+ "Driver configuration %s value %d is invalid. Value should be within"
+ " %d and %d.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+  (BFA_LOG_D << BFA_LOG_ARG2) | (BFA_LOG_D << BFA_LOG_ARG3) | 0), 4},
+
+{BFA_LOG_HAL_SM_ASSERT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_ERROR,
+ "HAL_SM_ASSERT",
+ "SM Assertion failure: %s:%d: event = %d",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+  (BFA_LOG_D << BFA_LOG_ARG2) | 0), 3},
+
+
+
+
+/* messages define for LINUX Module */
+{BFA_LOG_LINUX_DEVICE_CLAIMED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_DEVICE_CLAIMED",
+ "bfa device at %s claimed.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_HASH_INIT_FAILED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_HASH_INIT_FAILED",
+ "Hash table initialization failure for the port %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_SYSFS_FAILED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_SYSFS_FAILED",
+ "sysfs file creation failure for the port %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_MEM_ALLOC_FAILED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_MEM_ALLOC_FAILED",
+ "Memory allocation failed: %s.  ",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_DRIVER_REGISTRATION_FAILED,
+ BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "LINUX_DRIVER_REGISTRATION_FAILED",
+ "%s.  ",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_ITNIM_FREE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "LINUX_ITNIM_FREE",
+ "scsi%d: FCID: %s WWPN: %s",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) |
+  (BFA_LOG_S << BFA_LOG_ARG2) | 0), 3},
+
+{BFA_LOG_LINUX_ITNIM_ONLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_ITNIM_ONLINE",
+ "Target: %d:0:%d FCID: %s WWPN: %s",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+  (BFA_LOG_S << BFA_LOG_ARG2) | (BFA_LOG_S << BFA_LOG_ARG3) | 0), 4},
+
+{BFA_LOG_LINUX_ITNIM_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_ITNIM_OFFLINE",
+ "Target: %d:0:%d FCID: %s WWPN: %s",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+  (BFA_LOG_S << BFA_LOG_ARG2) | (BFA_LOG_S << BFA_LOG_ARG3) | 0), 4},
+
+{BFA_LOG_LINUX_SCSI_HOST_FREE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_SCSI_HOST_FREE",
+ "Free scsi%d",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_SCSI_ABORT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "LINUX_SCSI_ABORT",
+ "scsi%d: abort cmnd %p, iotag %x",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_P << BFA_LOG_ARG1) |
+  (BFA_LOG_X << BFA_LOG_ARG2) | 0), 3},
+
+{BFA_LOG_LINUX_SCSI_ABORT_COMP, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_SCSI_ABORT_COMP",
+ "scsi%d: complete abort 0x%p, iotag 0x%x",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_P << BFA_LOG_ARG1) |
+  (BFA_LOG_X << BFA_LOG_ARG2) | 0), 3},
+
+
+
+
+/* messages define for WDRV Module */
+{BFA_LOG_WDRV_IOC_INIT_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_IOC_INIT_ERROR",
+ "IOC initialization has failed.",
+ (0), 0},
+
+{BFA_LOG_WDRV_IOC_INTERNAL_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_IOC_INTERNAL_ERROR",
+ "IOC internal error.  ",
+ (0), 0},
+
+{BFA_LOG_WDRV_IOC_START_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_IOC_START_ERROR",
+ "IOC could not be started.  ",
+ (0), 0},
+
+{BFA_LOG_WDRV_IOC_STOP_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_IOC_STOP_ERROR",
+ "IOC could not be stopped.  ",
+ (0), 0},
+
+{BFA_LOG_WDRV_INSUFFICIENT_RESOURCES, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_INSUFFICIENT_RESOURCES",
+ "Insufficient memory.  ",
+ (0), 0},
+
+{BFA_LOG_WDRV_BASE_ADDRESS_MAP_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_BASE_ADDRESS_MAP_ERROR",
+ "Unable to map the IOC onto the system address space.  ",
+ (0), 0},
+
+
+{0, 0, 0, "", "", 0, 0},
+};
diff --git a/drivers/scsi/bfa/bfa_lps.c b/drivers/scsi/bfa/bfa_lps.c
new file mode 100644
index 000000000000..9844b45412b6
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_lps.c
@@ -0,0 +1,782 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfi/bfi_lps.h>
+#include <cs/bfa_debug.h>
+
+BFA_TRC_FILE(HAL, LPS);
+BFA_MODULE(lps);
+
+#define BFA_LPS_MIN_LPORTS	(1)
+#define BFA_LPS_MAX_LPORTS	(256)
+
+/**
+ * forward declarations
+ */
+static void bfa_lps_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len,
+			    u32 *dm_len);
+static void bfa_lps_attach(struct bfa_s *bfa, void *bfad,
+			   struct bfa_iocfc_cfg_s *cfg,
+			   struct bfa_meminfo_s *meminfo,
+			   struct bfa_pcidev_s *pcidev);
+static void bfa_lps_initdone(struct bfa_s *bfa);
+static void bfa_lps_detach(struct bfa_s *bfa);
+static void bfa_lps_start(struct bfa_s *bfa);
+static void bfa_lps_stop(struct bfa_s *bfa);
+static void bfa_lps_iocdisable(struct bfa_s *bfa);
+static void bfa_lps_login_rsp(struct bfa_s *bfa,
+			      struct bfi_lps_login_rsp_s *rsp);
+static void bfa_lps_logout_rsp(struct bfa_s *bfa,
+			       struct bfi_lps_logout_rsp_s *rsp);
+static void bfa_lps_reqq_resume(void *lps_arg);
+static void bfa_lps_free(struct bfa_lps_s *lps);
+static void bfa_lps_send_login(struct bfa_lps_s *lps);
+static void bfa_lps_send_logout(struct bfa_lps_s *lps);
+static void bfa_lps_login_comp(struct bfa_lps_s *lps);
+static void bfa_lps_logout_comp(struct bfa_lps_s *lps);
+
+
+/**
+ *  lps_pvt BFA LPS private functions
+ */
+
+enum bfa_lps_event {
+	BFA_LPS_SM_LOGIN	= 1,	/* login request from user	*/
+	BFA_LPS_SM_LOGOUT	= 2,	/* logout request from user	*/
+	BFA_LPS_SM_FWRSP	= 3,	/* f/w response to login/logout	*/
+	BFA_LPS_SM_RESUME	= 4,	/* space present in reqq queue	*/
+	BFA_LPS_SM_DELETE	= 5,	/* lps delete from user		*/
+	BFA_LPS_SM_OFFLINE	= 6,	/* Link is offline		*/
+};
+
+static void bfa_lps_sm_init(struct bfa_lps_s *lps, enum bfa_lps_event event);
+static void bfa_lps_sm_login(struct bfa_lps_s *lps, enum bfa_lps_event event);
+static void bfa_lps_sm_loginwait(struct bfa_lps_s *lps,
+			enum bfa_lps_event event);
+static void bfa_lps_sm_online(struct bfa_lps_s *lps, enum bfa_lps_event event);
+static void bfa_lps_sm_logout(struct bfa_lps_s *lps, enum bfa_lps_event event);
+static void bfa_lps_sm_logowait(struct bfa_lps_s *lps,
+			enum bfa_lps_event event);
+
+/**
+ * Init state -- no login
+ */
+static void
+bfa_lps_sm_init(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+	bfa_trc(lps->bfa, lps->lp_tag);
+	bfa_trc(lps->bfa, event);
+
+	switch (event) {
+	case BFA_LPS_SM_LOGIN:
+		if (bfa_reqq_full(lps->bfa, lps->reqq)) {
+			bfa_sm_set_state(lps, bfa_lps_sm_loginwait);
+			bfa_reqq_wait(lps->bfa, lps->reqq, &lps->wqe);
+		} else {
+			bfa_sm_set_state(lps, bfa_lps_sm_login);
+			bfa_lps_send_login(lps);
+		}
+		break;
+
+	case BFA_LPS_SM_LOGOUT:
+		bfa_lps_logout_comp(lps);
+		break;
+
+	case BFA_LPS_SM_DELETE:
+		bfa_lps_free(lps);
+		break;
+
+	case BFA_LPS_SM_OFFLINE:
+		break;
+
+	case BFA_LPS_SM_FWRSP:
+		/* Could happen when fabric detects loopback and discards
+		 * the lps request. Fw will eventually sent out the timeout
+		 * Just ignore
+		 */
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * login is in progress -- awaiting response from firmware
+ */
+static void
+bfa_lps_sm_login(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+	bfa_trc(lps->bfa, lps->lp_tag);
+	bfa_trc(lps->bfa, event);
+
+	switch (event) {
+	case BFA_LPS_SM_FWRSP:
+		if (lps->status == BFA_STATUS_OK)
+			bfa_sm_set_state(lps, bfa_lps_sm_online);
+		else
+			bfa_sm_set_state(lps, bfa_lps_sm_init);
+		bfa_lps_login_comp(lps);
+		break;
+
+	case BFA_LPS_SM_OFFLINE:
+		bfa_sm_set_state(lps, bfa_lps_sm_init);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * login pending - awaiting space in request queue
+ */
+static void
+bfa_lps_sm_loginwait(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+	bfa_trc(lps->bfa, lps->lp_tag);
+	bfa_trc(lps->bfa, event);
+
+	switch (event) {
+	case BFA_LPS_SM_RESUME:
+		bfa_sm_set_state(lps, bfa_lps_sm_login);
+		break;
+
+	case BFA_LPS_SM_OFFLINE:
+		bfa_sm_set_state(lps, bfa_lps_sm_init);
+		bfa_reqq_wcancel(&lps->wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * login complete
+ */
+static void
+bfa_lps_sm_online(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+	bfa_trc(lps->bfa, lps->lp_tag);
+	bfa_trc(lps->bfa, event);
+
+	switch (event) {
+	case BFA_LPS_SM_LOGOUT:
+		if (bfa_reqq_full(lps->bfa, lps->reqq)) {
+			bfa_sm_set_state(lps, bfa_lps_sm_logowait);
+			bfa_reqq_wait(lps->bfa, lps->reqq, &lps->wqe);
+		} else {
+			bfa_sm_set_state(lps, bfa_lps_sm_logout);
+			bfa_lps_send_logout(lps);
+		}
+		break;
+
+	case BFA_LPS_SM_OFFLINE:
+	case BFA_LPS_SM_DELETE:
+		bfa_sm_set_state(lps, bfa_lps_sm_init);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * logout in progress - awaiting firmware response
+ */
+static void
+bfa_lps_sm_logout(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+	bfa_trc(lps->bfa, lps->lp_tag);
+	bfa_trc(lps->bfa, event);
+
+	switch (event) {
+	case BFA_LPS_SM_FWRSP:
+		bfa_sm_set_state(lps, bfa_lps_sm_init);
+		bfa_lps_logout_comp(lps);
+		break;
+
+	case BFA_LPS_SM_OFFLINE:
+		bfa_sm_set_state(lps, bfa_lps_sm_init);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * logout pending -- awaiting space in request queue
+ */
+static void
+bfa_lps_sm_logowait(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+	bfa_trc(lps->bfa, lps->lp_tag);
+	bfa_trc(lps->bfa, event);
+
+	switch (event) {
+	case BFA_LPS_SM_RESUME:
+		bfa_sm_set_state(lps, bfa_lps_sm_logout);
+		bfa_lps_send_logout(lps);
+		break;
+
+	case BFA_LPS_SM_OFFLINE:
+		bfa_sm_set_state(lps, bfa_lps_sm_init);
+		bfa_reqq_wcancel(&lps->wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  lps_pvt BFA LPS private functions
+ */
+
+/**
+ * return memory requirement
+ */
+static void
+bfa_lps_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len, u32 *dm_len)
+{
+	if (cfg->drvcfg.min_cfg)
+		*ndm_len += sizeof(struct bfa_lps_s) * BFA_LPS_MIN_LPORTS;
+	else
+		*ndm_len += sizeof(struct bfa_lps_s) * BFA_LPS_MAX_LPORTS;
+}
+
+/**
+ * bfa module attach at initialization time
+ */
+static void
+bfa_lps_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+		struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+	struct bfa_lps_mod_s	*mod = BFA_LPS_MOD(bfa);
+	struct bfa_lps_s	*lps;
+	int			i;
+
+	bfa_os_memset(mod, 0, sizeof(struct bfa_lps_mod_s));
+	mod->num_lps = BFA_LPS_MAX_LPORTS;
+	if (cfg->drvcfg.min_cfg)
+		mod->num_lps = BFA_LPS_MIN_LPORTS;
+	else
+		mod->num_lps = BFA_LPS_MAX_LPORTS;
+	mod->lps_arr = lps = (struct bfa_lps_s *) bfa_meminfo_kva(meminfo);
+
+	bfa_meminfo_kva(meminfo) += mod->num_lps * sizeof(struct bfa_lps_s);
+
+	INIT_LIST_HEAD(&mod->lps_free_q);
+	INIT_LIST_HEAD(&mod->lps_active_q);
+
+	for (i = 0; i < mod->num_lps; i++, lps++) {
+		lps->bfa	= bfa;
+		lps->lp_tag	= (u8) i;
+		lps->reqq	= BFA_REQQ_LPS;
+		bfa_reqq_winit(&lps->wqe, bfa_lps_reqq_resume, lps);
+		list_add_tail(&lps->qe, &mod->lps_free_q);
+	}
+}
+
+static void
+bfa_lps_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_lps_detach(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_lps_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_lps_stop(struct bfa_s *bfa)
+{
+}
+
+/**
+ * IOC in disabled state -- consider all lps offline
+ */
+static void
+bfa_lps_iocdisable(struct bfa_s *bfa)
+{
+	struct bfa_lps_mod_s	*mod = BFA_LPS_MOD(bfa);
+	struct bfa_lps_s	*lps;
+	struct list_head		*qe, *qen;
+
+	list_for_each_safe(qe, qen, &mod->lps_active_q) {
+		lps = (struct bfa_lps_s *) qe;
+		bfa_sm_send_event(lps, BFA_LPS_SM_OFFLINE);
+	}
+}
+
+/**
+ * Firmware login response
+ */
+static void
+bfa_lps_login_rsp(struct bfa_s *bfa, struct bfi_lps_login_rsp_s *rsp)
+{
+	struct bfa_lps_mod_s	*mod = BFA_LPS_MOD(bfa);
+	struct bfa_lps_s	*lps;
+
+	bfa_assert(rsp->lp_tag < mod->num_lps);
+	lps = BFA_LPS_FROM_TAG(mod, rsp->lp_tag);
+
+	lps->status = rsp->status;
+	switch (rsp->status) {
+	case BFA_STATUS_OK:
+		lps->fport	= rsp->f_port;
+		lps->npiv_en	= rsp->npiv_en;
+		lps->lp_pid	= rsp->lp_pid;
+		lps->pr_bbcred	= bfa_os_ntohs(rsp->bb_credit);
+		lps->pr_pwwn	= rsp->port_name;
+		lps->pr_nwwn	= rsp->node_name;
+		lps->auth_req	= rsp->auth_req;
+		lps->lp_mac	= rsp->lp_mac;
+		lps->brcd_switch = rsp->brcd_switch;
+		lps->fcf_mac	= rsp->fcf_mac;
+
+		break;
+
+	case BFA_STATUS_FABRIC_RJT:
+		lps->lsrjt_rsn = rsp->lsrjt_rsn;
+		lps->lsrjt_expl = rsp->lsrjt_expl;
+
+		break;
+
+	case BFA_STATUS_EPROTOCOL:
+		lps->ext_status = rsp->ext_status;
+
+		break;
+
+	default:
+		/* Nothing to do with other status */
+		break;
+	}
+
+	bfa_sm_send_event(lps, BFA_LPS_SM_FWRSP);
+}
+
+/**
+ * Firmware logout response
+ */
+static void
+bfa_lps_logout_rsp(struct bfa_s *bfa, struct bfi_lps_logout_rsp_s *rsp)
+{
+	struct bfa_lps_mod_s	*mod = BFA_LPS_MOD(bfa);
+	struct bfa_lps_s	*lps;
+
+	bfa_assert(rsp->lp_tag < mod->num_lps);
+	lps = BFA_LPS_FROM_TAG(mod, rsp->lp_tag);
+
+	bfa_sm_send_event(lps, BFA_LPS_SM_FWRSP);
+}
+
+/**
+ * Space is available in request queue, resume queueing request to firmware.
+ */
+static void
+bfa_lps_reqq_resume(void *lps_arg)
+{
+	struct bfa_lps_s	*lps = lps_arg;
+
+	bfa_sm_send_event(lps, BFA_LPS_SM_RESUME);
+}
+
+/**
+ * lps is freed -- triggered by vport delete
+ */
+static void
+bfa_lps_free(struct bfa_lps_s *lps)
+{
+	struct bfa_lps_mod_s	*mod = BFA_LPS_MOD(lps->bfa);
+
+	list_del(&lps->qe);
+	list_add_tail(&lps->qe, &mod->lps_free_q);
+}
+
+/**
+ * send login request to firmware
+ */
+static void
+bfa_lps_send_login(struct bfa_lps_s *lps)
+{
+	struct bfi_lps_login_req_s	*m;
+
+	m = bfa_reqq_next(lps->bfa, lps->reqq);
+	bfa_assert(m);
+
+	bfi_h2i_set(m->mh, BFI_MC_LPS, BFI_LPS_H2I_LOGIN_REQ,
+			bfa_lpuid(lps->bfa));
+
+	m->lp_tag	= lps->lp_tag;
+	m->alpa		= lps->alpa;
+	m->pdu_size	= bfa_os_htons(lps->pdusz);
+	m->pwwn		= lps->pwwn;
+	m->nwwn		= lps->nwwn;
+	m->fdisc	= lps->fdisc;
+	m->auth_en	= lps->auth_en;
+
+	bfa_reqq_produce(lps->bfa, lps->reqq);
+}
+
+/**
+ * send logout request to firmware
+ */
+static void
+bfa_lps_send_logout(struct bfa_lps_s *lps)
+{
+	struct bfi_lps_logout_req_s *m;
+
+	m = bfa_reqq_next(lps->bfa, lps->reqq);
+	bfa_assert(m);
+
+	bfi_h2i_set(m->mh, BFI_MC_LPS, BFI_LPS_H2I_LOGOUT_REQ,
+			bfa_lpuid(lps->bfa));
+
+	m->lp_tag    = lps->lp_tag;
+	m->port_name = lps->pwwn;
+	bfa_reqq_produce(lps->bfa, lps->reqq);
+}
+
+/**
+ * Indirect login completion handler for non-fcs
+ */
+static void
+bfa_lps_login_comp_cb(void *arg, bfa_boolean_t complete)
+{
+	struct bfa_lps_s *lps	= arg;
+
+	if (!complete)
+		return;
+
+	if (lps->fdisc)
+		bfa_cb_lps_fdisc_comp(lps->bfa->bfad, lps->uarg, lps->status);
+	else
+		bfa_cb_lps_flogi_comp(lps->bfa->bfad, lps->uarg, lps->status);
+}
+
+/**
+ * Login completion handler -- direct call for fcs, queue for others
+ */
+static void
+bfa_lps_login_comp(struct bfa_lps_s *lps)
+{
+	if (!lps->bfa->fcs) {
+		bfa_cb_queue(lps->bfa, &lps->hcb_qe,
+				bfa_lps_login_comp_cb, lps);
+		return;
+	}
+
+	if (lps->fdisc)
+		bfa_cb_lps_fdisc_comp(lps->bfa->bfad, lps->uarg, lps->status);
+	else
+		bfa_cb_lps_flogi_comp(lps->bfa->bfad, lps->uarg, lps->status);
+}
+
+/**
+ * Indirect logout completion handler for non-fcs
+ */
+static void
+bfa_lps_logout_comp_cb(void *arg, bfa_boolean_t complete)
+{
+	struct bfa_lps_s *lps	= arg;
+
+	if (!complete)
+		return;
+
+	if (lps->fdisc)
+		bfa_cb_lps_fdisclogo_comp(lps->bfa->bfad, lps->uarg);
+	else
+		bfa_cb_lps_flogo_comp(lps->bfa->bfad, lps->uarg);
+}
+
+/**
+ * Logout completion handler -- direct call for fcs, queue for others
+ */
+static void
+bfa_lps_logout_comp(struct bfa_lps_s *lps)
+{
+	if (!lps->bfa->fcs) {
+		bfa_cb_queue(lps->bfa, &lps->hcb_qe,
+				bfa_lps_logout_comp_cb, lps);
+		return;
+	}
+	if (lps->fdisc)
+		bfa_cb_lps_fdisclogo_comp(lps->bfa->bfad, lps->uarg);
+	else
+		bfa_cb_lps_flogo_comp(lps->bfa->bfad, lps->uarg);
+}
+
+
+
+/**
+ *  lps_public BFA LPS public functions
+ */
+
+/**
+ * Allocate a lport srvice tag.
+ */
+struct bfa_lps_s  *
+bfa_lps_alloc(struct bfa_s *bfa)
+{
+	struct bfa_lps_mod_s	*mod = BFA_LPS_MOD(bfa);
+	struct bfa_lps_s	*lps = NULL;
+
+	bfa_q_deq(&mod->lps_free_q, &lps);
+
+	if (lps == NULL)
+		return NULL;
+
+	list_add_tail(&lps->qe, &mod->lps_active_q);
+
+	bfa_sm_set_state(lps, bfa_lps_sm_init);
+	return lps;
+}
+
+/**
+ * Free lport service tag. This can be called anytime after an alloc.
+ * No need to wait for any pending login/logout completions.
+ */
+void
+bfa_lps_delete(struct bfa_lps_s *lps)
+{
+	bfa_sm_send_event(lps, BFA_LPS_SM_DELETE);
+}
+
+/**
+ * Initiate a lport login.
+ */
+void
+bfa_lps_flogi(struct bfa_lps_s *lps, void *uarg, u8 alpa, u16 pdusz,
+	wwn_t pwwn, wwn_t nwwn, bfa_boolean_t auth_en)
+{
+	lps->uarg	= uarg;
+	lps->alpa	= alpa;
+	lps->pdusz	= pdusz;
+	lps->pwwn	= pwwn;
+	lps->nwwn	= nwwn;
+	lps->fdisc	= BFA_FALSE;
+	lps->auth_en	= auth_en;
+	bfa_sm_send_event(lps, BFA_LPS_SM_LOGIN);
+}
+
+/**
+ * Initiate a lport fdisc login.
+ */
+void
+bfa_lps_fdisc(struct bfa_lps_s *lps, void *uarg, u16 pdusz, wwn_t pwwn,
+	wwn_t nwwn)
+{
+	lps->uarg	= uarg;
+	lps->alpa	= 0;
+	lps->pdusz	= pdusz;
+	lps->pwwn	= pwwn;
+	lps->nwwn	= nwwn;
+	lps->fdisc	= BFA_TRUE;
+	lps->auth_en	= BFA_FALSE;
+	bfa_sm_send_event(lps, BFA_LPS_SM_LOGIN);
+}
+
+/**
+ * Initiate a lport logout (flogi).
+ */
+void
+bfa_lps_flogo(struct bfa_lps_s *lps)
+{
+	bfa_sm_send_event(lps, BFA_LPS_SM_LOGOUT);
+}
+
+/**
+ * Initiate a lport FDSIC logout.
+ */
+void
+bfa_lps_fdisclogo(struct bfa_lps_s *lps)
+{
+	bfa_sm_send_event(lps, BFA_LPS_SM_LOGOUT);
+}
+
+/**
+ * Discard a pending login request -- should be called only for
+ * link down handling.
+ */
+void
+bfa_lps_discard(struct bfa_lps_s *lps)
+{
+	bfa_sm_send_event(lps, BFA_LPS_SM_OFFLINE);
+}
+
+/**
+ * Return lport services tag
+ */
+u8
+bfa_lps_get_tag(struct bfa_lps_s *lps)
+{
+	return lps->lp_tag;
+}
+
+/**
+ * Return lport services tag given the pid
+ */
+u8
+bfa_lps_get_tag_from_pid(struct bfa_s *bfa, u32 pid)
+{
+	struct bfa_lps_mod_s	*mod = BFA_LPS_MOD(bfa);
+	struct bfa_lps_s	*lps;
+	int			i;
+
+	for (i = 0, lps = mod->lps_arr; i < mod->num_lps; i++, lps++) {
+		if (lps->lp_pid == pid)
+			return lps->lp_tag;
+	}
+
+	/* Return base port tag anyway */
+	return 0;
+}
+
+/**
+ * return if fabric login indicates support for NPIV
+ */
+bfa_boolean_t
+bfa_lps_is_npiv_en(struct bfa_lps_s *lps)
+{
+	return lps->npiv_en;
+}
+
+/**
+ * Return TRUE if attached to F-Port, else return FALSE
+ */
+bfa_boolean_t
+bfa_lps_is_fport(struct bfa_lps_s *lps)
+{
+	return lps->fport;
+}
+
+/**
+ * Return TRUE if attached to a Brocade Fabric
+ */
+bfa_boolean_t
+bfa_lps_is_brcd_fabric(struct bfa_lps_s *lps)
+{
+	return lps->brcd_switch;
+}
+/**
+ * return TRUE if authentication is required
+ */
+bfa_boolean_t
+bfa_lps_is_authreq(struct bfa_lps_s *lps)
+{
+	return lps->auth_req;
+}
+
+bfa_eproto_status_t
+bfa_lps_get_extstatus(struct bfa_lps_s *lps)
+{
+	return lps->ext_status;
+}
+
+/**
+ * return port id assigned to the lport
+ */
+u32
+bfa_lps_get_pid(struct bfa_lps_s *lps)
+{
+	return lps->lp_pid;
+}
+
+/**
+ * Return bb_credit assigned in FLOGI response
+ */
+u16
+bfa_lps_get_peer_bbcredit(struct bfa_lps_s *lps)
+{
+	return lps->pr_bbcred;
+}
+
+/**
+ * Return peer port name
+ */
+wwn_t
+bfa_lps_get_peer_pwwn(struct bfa_lps_s *lps)
+{
+	return lps->pr_pwwn;
+}
+
+/**
+ * Return peer node name
+ */
+wwn_t
+bfa_lps_get_peer_nwwn(struct bfa_lps_s *lps)
+{
+	return lps->pr_nwwn;
+}
+
+/**
+ * return reason code if login request is rejected
+ */
+u8
+bfa_lps_get_lsrjt_rsn(struct bfa_lps_s *lps)
+{
+	return lps->lsrjt_rsn;
+}
+
+/**
+ * return explanation code if login request is rejected
+ */
+u8
+bfa_lps_get_lsrjt_expl(struct bfa_lps_s *lps)
+{
+	return lps->lsrjt_expl;
+}
+
+
+/**
+ * LPS firmware message class handler.
+ */
+void
+bfa_lps_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+	union bfi_lps_i2h_msg_u	msg;
+
+	bfa_trc(bfa, m->mhdr.msg_id);
+	msg.msg = m;
+
+	switch (m->mhdr.msg_id) {
+	case BFI_LPS_H2I_LOGIN_RSP:
+		bfa_lps_login_rsp(bfa, msg.login_rsp);
+		break;
+
+	case BFI_LPS_H2I_LOGOUT_RSP:
+		bfa_lps_logout_rsp(bfa, msg.logout_rsp);
+		break;
+
+	default:
+		bfa_trc(bfa, m->mhdr.msg_id);
+		bfa_assert(0);
+	}
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_lps_priv.h b/drivers/scsi/bfa/bfa_lps_priv.h
new file mode 100644
index 000000000000..d16c6ce995df
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_lps_priv.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_LPS_PRIV_H__
+#define __BFA_LPS_PRIV_H__
+
+#include <bfa_svc.h>
+
+struct bfa_lps_mod_s {
+	struct list_head		lps_free_q;
+	struct list_head		lps_active_q;
+	struct bfa_lps_s	*lps_arr;
+	int			num_lps;
+};
+
+#define BFA_LPS_MOD(__bfa)		(&(__bfa)->modules.lps_mod)
+#define BFA_LPS_FROM_TAG(__mod, __tag)	(&(__mod)->lps_arr[__tag])
+
+/*
+ * external functions
+ */
+void	bfa_lps_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+
+#endif /* __BFA_LPS_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_module.c b/drivers/scsi/bfa/bfa_module.c
new file mode 100644
index 000000000000..32eda8e1ec65
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_module.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#include <bfa.h>
+#include <defs/bfa_defs_pci.h>
+#include <cs/bfa_debug.h>
+#include <bfa_iocfc.h>
+
+/**
+ * BFA module list terminated by NULL
+ */
+struct bfa_module_s *hal_mods[] = {
+	&hal_mod_sgpg,
+	&hal_mod_pport,
+	&hal_mod_fcxp,
+	&hal_mod_lps,
+	&hal_mod_uf,
+	&hal_mod_rport,
+	&hal_mod_fcpim,
+#ifdef BFA_CFG_PBIND
+	&hal_mod_pbind,
+#endif
+	NULL
+};
+
+/**
+ * Message handlers for various modules.
+ */
+bfa_isr_func_t  bfa_isrs[BFI_MC_MAX] = {
+	bfa_isr_unhandled,	/* NONE */
+	bfa_isr_unhandled,	/* BFI_MC_IOC */
+	bfa_isr_unhandled,	/* BFI_MC_DIAG */
+	bfa_isr_unhandled,	/* BFI_MC_FLASH */
+	bfa_isr_unhandled,	/* BFI_MC_CEE */
+	bfa_pport_isr,		/* BFI_MC_PORT */
+	bfa_isr_unhandled,	/* BFI_MC_IOCFC */
+	bfa_isr_unhandled,	/* BFI_MC_LL */
+	bfa_uf_isr,		/* BFI_MC_UF */
+	bfa_fcxp_isr,		/* BFI_MC_FCXP */
+	bfa_lps_isr,		/* BFI_MC_LPS */
+	bfa_rport_isr,		/* BFI_MC_RPORT */
+	bfa_itnim_isr,		/* BFI_MC_ITNIM */
+	bfa_isr_unhandled,	/* BFI_MC_IOIM_READ */
+	bfa_isr_unhandled,	/* BFI_MC_IOIM_WRITE */
+	bfa_isr_unhandled,	/* BFI_MC_IOIM_IO */
+	bfa_ioim_isr,		/* BFI_MC_IOIM */
+	bfa_ioim_good_comp_isr,	/* BFI_MC_IOIM_IOCOM */
+	bfa_tskim_isr,		/* BFI_MC_TSKIM */
+	bfa_isr_unhandled,	/* BFI_MC_SBOOT */
+	bfa_isr_unhandled,	/* BFI_MC_IPFC */
+	bfa_isr_unhandled,	/* BFI_MC_PORT */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+};
+
+/**
+ * Message handlers for mailbox command classes
+ */
+bfa_ioc_mbox_mcfunc_t  bfa_mbox_isrs[BFI_MC_MAX] = {
+	NULL,
+	NULL,			/* BFI_MC_IOC	*/
+	NULL,			/* BFI_MC_DIAG	*/
+	NULL,		/* BFI_MC_FLASH */
+	NULL,			/* BFI_MC_CEE	*/
+	NULL,			/* BFI_MC_PORT	*/
+	bfa_iocfc_isr,		/* BFI_MC_IOCFC */
+	NULL,
+};
+
diff --git a/drivers/scsi/bfa/bfa_modules_priv.h b/drivers/scsi/bfa/bfa_modules_priv.h
new file mode 100644
index 000000000000..96f70534593c
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_modules_priv.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_MODULES_PRIV_H__
+#define __BFA_MODULES_PRIV_H__
+
+#include "bfa_uf_priv.h"
+#include "bfa_port_priv.h"
+#include "bfa_rport_priv.h"
+#include "bfa_fcxp_priv.h"
+#include "bfa_lps_priv.h"
+#include "bfa_fcpim_priv.h"
+#include <cee/bfa_cee.h>
+#include <port/bfa_port.h>
+
+
+struct bfa_modules_s {
+	struct bfa_pport_s	pport;	/*  physical port module	*/
+	struct bfa_fcxp_mod_s fcxp_mod; /*  fcxp module		*/
+	struct bfa_lps_mod_s lps_mod;   /*  fcxp module		*/
+	struct bfa_uf_mod_s uf_mod;	/*  unsolicited frame module	*/
+	struct bfa_rport_mod_s rport_mod; /*  remote port module	*/
+	struct bfa_fcpim_mod_s fcpim_mod; /*  FCP initiator module	*/
+	struct bfa_sgpg_mod_s sgpg_mod; /*  SG page module		*/
+	struct bfa_cee_s cee;   	/*  CEE Module                 */
+	struct bfa_port_s port;		/*  Physical port module	*/
+};
+
+#endif /* __BFA_MODULES_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_os_inc.h b/drivers/scsi/bfa/bfa_os_inc.h
new file mode 100644
index 000000000000..10a89f75fa94
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_os_inc.h
@@ -0,0 +1,222 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * Contains declarations all OS Specific files needed for BFA layer
+ */
+
+#ifndef __BFA_OS_INC_H__
+#define __BFA_OS_INC_H__
+
+#ifndef __KERNEL__
+#include <stdint.h>
+#else
+#include <linux/types.h>
+
+#include <linux/version.h>
+#include <linux/pci.h>
+
+#include <linux/dma-mapping.h>
+#define SET_MODULE_VERSION(VER)
+
+#include <linux/idr.h>
+
+#include <linux/interrupt.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+
+#include <linux/workqueue.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_transport.h>
+
+#define BFA_ERR			KERN_ERR
+#define BFA_WARNING		KERN_WARNING
+#define BFA_NOTICE		KERN_NOTICE
+#define BFA_INFO		KERN_INFO
+#define BFA_DEBUG		KERN_DEBUG
+
+#define LOG_BFAD_INIT		0x00000001
+#define LOG_FCP_IO		0x00000002
+
+#ifdef DEBUG
+#define BFA_LOG_TRACE(bfad, level, mask, fmt, arg...)			\
+		BFA_LOG(bfad, level, mask, fmt, ## arg)
+#define BFA_DEV_TRACE(bfad, level, fmt, arg...)				\
+		BFA_DEV_PRINTF(bfad, level, fmt, ## arg)
+#define BFA_TRACE(level, fmt, arg...)					\
+		BFA_PRINTF(level, fmt, ## arg)
+#else
+#define BFA_LOG_TRACE(bfad, level, mask, fmt, arg...)
+#define BFA_DEV_TRACE(bfad, level, fmt, arg...)
+#define BFA_TRACE(level, fmt, arg...)
+#endif
+
+#define BFA_ASSERT(p) do {						\
+	if (!(p)) {      \
+		printk(KERN_ERR "assert(%s) failed at %s:%d\n",		\
+		#p, __FILE__, __LINE__);      \
+		BUG();      \
+	}								\
+} while (0)
+
+
+#define BFA_LOG(bfad, level, mask, fmt, arg...)				\
+do { 									\
+	if (((mask) & (((struct bfad_s *)(bfad))->			\
+		cfg_data[cfg_log_mask])) || (level[1] <= '3'))		\
+		dev_printk(level, &(((struct bfad_s *)			\
+			(bfad))->pcidev->dev), fmt, ##arg);      \
+} while (0)
+
+#ifndef BFA_DEV_PRINTF
+#define BFA_DEV_PRINTF(bfad, level, fmt, arg...)			\
+		dev_printk(level, &(((struct bfad_s *)			\
+			(bfad))->pcidev->dev), fmt, ##arg);
+#endif
+
+#define BFA_PRINTF(level, fmt, arg...)					\
+		printk(level fmt, ##arg);
+
+int bfa_os_MWB(void *);
+
+#define bfa_os_mmiowb()		mmiowb()
+
+#define bfa_swap_3b(_x)				\
+	((((_x) & 0xff) << 16) |		\
+	((_x) & 0x00ff00) |			\
+	(((_x) & 0xff0000) >> 16))
+
+#define bfa_swap_8b(_x) 				\
+     ((((_x) & 0xff00000000000000ull) >> 56)		\
+      | (((_x) & 0x00ff000000000000ull) >> 40)		\
+      | (((_x) & 0x0000ff0000000000ull) >> 24)		\
+      | (((_x) & 0x000000ff00000000ull) >> 8)		\
+      | (((_x) & 0x00000000ff000000ull) << 8)		\
+      | (((_x) & 0x0000000000ff0000ull) << 24)		\
+      | (((_x) & 0x000000000000ff00ull) << 40)		\
+      | (((_x) & 0x00000000000000ffull) << 56))
+
+#define bfa_os_swap32(_x) 			\
+	((((_x) & 0xff) << 24) 		|	\
+	(((_x) & 0x0000ff00) << 8)	|	\
+	(((_x) & 0x00ff0000) >> 8)	|	\
+	(((_x) & 0xff000000) >> 24))
+
+
+#ifndef __BIGENDIAN
+#define bfa_os_htons(_x) ((u16)((((_x) & 0xff00) >> 8) | \
+				 (((_x) & 0x00ff) << 8)))
+
+#define bfa_os_htonl(_x)	bfa_os_swap32(_x)
+#define bfa_os_htonll(_x)	bfa_swap_8b(_x)
+#define bfa_os_hton3b(_x)	bfa_swap_3b(_x)
+
+#define bfa_os_wtole(_x)   (_x)
+
+#else
+
+#define bfa_os_htons(_x)   (_x)
+#define bfa_os_htonl(_x)   (_x)
+#define bfa_os_hton3b(_x)  (_x)
+#define bfa_os_htonll(_x)  (_x)
+#define bfa_os_wtole(_x)   bfa_os_swap32(_x)
+
+#endif
+
+#define bfa_os_ntohs(_x)   bfa_os_htons(_x)
+#define bfa_os_ntohl(_x)   bfa_os_htonl(_x)
+#define bfa_os_ntohll(_x)  bfa_os_htonll(_x)
+#define bfa_os_ntoh3b(_x)  bfa_os_hton3b(_x)
+
+#define bfa_os_u32(__pa64) ((__pa64) >> 32)
+
+#define bfa_os_memset	memset
+#define bfa_os_memcpy	memcpy
+#define bfa_os_udelay	udelay
+#define bfa_os_vsprintf vsprintf
+
+#define bfa_os_assign(__t, __s) __t = __s
+
+#define bfa_os_addr_t char __iomem *
+#define bfa_os_panic()
+
+#define bfa_os_reg_read(_raddr) bfa_os_wtole(readl(_raddr))
+#define bfa_os_reg_write(_raddr, _val) writel(bfa_os_wtole((_val)), (_raddr))
+#define bfa_os_mem_read(_raddr, _off)                                   \
+	bfa_os_ntohl(readl(((_raddr) + (_off))))
+#define bfa_os_mem_write(_raddr, _off, _val)                            \
+	writel(bfa_os_htonl((_val)), ((_raddr) + (_off)))
+
+#define BFA_TRC_TS(_trcm)						\
+			({						\
+				struct timeval tv;			\
+									\
+				do_gettimeofday(&tv);      \
+				(tv.tv_sec*1000000+tv.tv_usec);      \
+			 })
+
+struct bfa_log_mod_s;
+void bfa_os_printf(struct bfa_log_mod_s *log_mod, u32 msg_id,
+			const char *fmt, ...);
+#endif
+
+#define boolean_t int
+
+/**
+ * For current time stamp, OS API will fill-in
+ */
+struct bfa_timeval_s {
+	u32	tv_sec;		/*  seconds        */
+	u32	tv_usec;	/*  microseconds   */
+};
+
+void bfa_os_gettimeofday(struct bfa_timeval_s *tv);
+
+static inline void
+wwn2str(char *wwn_str, u64 wwn)
+{
+	union {
+		u64 wwn;
+		u8 byte[8];
+	} w;
+
+	w.wwn = wwn;
+	sprintf(wwn_str, "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x", w.byte[0],
+		w.byte[1], w.byte[2], w.byte[3], w.byte[4], w.byte[5],
+		w.byte[6], w.byte[7]);
+}
+
+static inline void
+fcid2str(char *fcid_str, u32 fcid)
+{
+	union {
+		u32 fcid;
+		u8 byte[4];
+	} f;
+
+	f.fcid = fcid;
+	sprintf(fcid_str, "%02x:%02x:%02x", f.byte[1], f.byte[2], f.byte[3]);
+}
+
+#endif /* __BFA_OS_INC_H__ */
diff --git a/drivers/scsi/bfa/bfa_port.c b/drivers/scsi/bfa/bfa_port.c
new file mode 100644
index 000000000000..cab19028361a
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_port.c
@@ -0,0 +1,460 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <defs/bfa_defs_port.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+#include <cs/bfa_debug.h>
+#include <port/bfa_port.h>
+#include <bfi/bfi.h>
+#include <bfi/bfi_port.h>
+#include <bfa_ioc.h>
+#include <cna/bfa_cna_trcmod.h>
+
+BFA_TRC_FILE(CNA, PORT);
+
+#define bfa_ioc_portid(__ioc) ((__ioc)->port_id)
+#define bfa_lpuid(__arg) bfa_ioc_portid(&(__arg)->ioc)
+
+static void
+bfa_port_stats_swap(struct bfa_port_s *port, union bfa_pport_stats_u *stats)
+{
+	u32       *dip = (u32 *) stats;
+	u32        t0, t1;
+	int             i;
+
+	for (i = 0; i < sizeof(union bfa_pport_stats_u) / sizeof(u32);
+	     i += 2) {
+		t0 = dip[i];
+		t1 = dip[i + 1];
+#ifdef __BIGENDIAN
+		dip[i] = bfa_os_ntohl(t0);
+		dip[i + 1] = bfa_os_ntohl(t1);
+#else
+		dip[i] = bfa_os_ntohl(t1);
+		dip[i + 1] = bfa_os_ntohl(t0);
+#endif
+	}
+
+    /** todo
+     * QoS stats r also swapped as 64bit; that structure also
+     * has to use 64 bit counters
+     */
+}
+
+/**
+ * bfa_port_enable_isr()
+ *
+ *
+ * @param[in] port - Pointer to the port module
+ *            status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_port_enable_isr(struct bfa_port_s *port, bfa_status_t status)
+{
+	bfa_assert(0);
+}
+
+/**
+ * bfa_port_disable_isr()
+ *
+ *
+ * @param[in] port - Pointer to the port module
+ *            status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_port_disable_isr(struct bfa_port_s *port, bfa_status_t status)
+{
+	bfa_assert(0);
+}
+
+/**
+ * bfa_port_get_stats_isr()
+ *
+ *
+ * @param[in] port - Pointer to the Port module
+ *            status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_port_get_stats_isr(struct bfa_port_s *port, bfa_status_t status)
+{
+	port->stats_status = status;
+	port->stats_busy = BFA_FALSE;
+
+	if (status == BFA_STATUS_OK) {
+		memcpy(port->stats, port->stats_dma.kva,
+		       sizeof(union bfa_pport_stats_u));
+		bfa_port_stats_swap(port, port->stats);
+	}
+
+	if (port->stats_cbfn) {
+		port->stats_cbfn(port->stats_cbarg, status);
+		port->stats_cbfn = NULL;
+	}
+}
+
+/**
+ * bfa_port_clear_stats_isr()
+ *
+ *
+ * @param[in] port - Pointer to the Port module
+ *            status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_port_clear_stats_isr(struct bfa_port_s *port, bfa_status_t status)
+{
+	port->stats_status = status;
+	port->stats_busy = BFA_FALSE;
+
+	if (port->stats_cbfn) {
+		port->stats_cbfn(port->stats_cbarg, status);
+		port->stats_cbfn = NULL;
+	}
+}
+
+/**
+ * bfa_port_isr()
+ *
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return void
+ */
+static void
+bfa_port_isr(void *cbarg, struct bfi_mbmsg_s *m)
+{
+	struct bfa_port_s *port = (struct bfa_port_s *)cbarg;
+	union bfi_port_i2h_msg_u *i2hmsg;
+
+	i2hmsg = (union bfi_port_i2h_msg_u *)m;
+	bfa_trc(port, m->mh.msg_id);
+
+	switch (m->mh.msg_id) {
+	case BFI_PORT_I2H_ENABLE_RSP:
+		if (port->endis_pending == BFA_FALSE)
+			break;
+		bfa_port_enable_isr(port, i2hmsg->enable_rsp.status);
+		break;
+
+	case BFI_PORT_I2H_DISABLE_RSP:
+		if (port->endis_pending == BFA_FALSE)
+			break;
+		bfa_port_disable_isr(port, i2hmsg->disable_rsp.status);
+		break;
+
+	case BFI_PORT_I2H_GET_STATS_RSP:
+		/*
+		 * Stats busy flag is still set? (may be cmd timed out)
+		 */
+		if (port->stats_busy == BFA_FALSE)
+			break;
+		bfa_port_get_stats_isr(port, i2hmsg->getstats_rsp.status);
+		break;
+
+	case BFI_PORT_I2H_CLEAR_STATS_RSP:
+		if (port->stats_busy == BFA_FALSE)
+			break;
+		bfa_port_clear_stats_isr(port, i2hmsg->clearstats_rsp.status);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * bfa_port_meminfo()
+ *
+ *
+ * @param[in] void
+ *
+ * @return Size of DMA region
+ */
+u32
+bfa_port_meminfo(void)
+{
+	return BFA_ROUNDUP(sizeof(union bfa_pport_stats_u), BFA_DMA_ALIGN_SZ);
+}
+
+/**
+ * bfa_port_mem_claim()
+ *
+ *
+ * @param[in] port Port module pointer
+ * 	      dma_kva Kernel Virtual Address of Port DMA Memory
+ * 	      dma_pa  Physical Address of Port DMA Memory
+ *
+ * @return void
+ */
+void
+bfa_port_mem_claim(struct bfa_port_s *port, u8 *dma_kva, u64 dma_pa)
+{
+	port->stats_dma.kva = dma_kva;
+	port->stats_dma.pa = dma_pa;
+}
+
+/**
+ * bfa_port_enable()
+ *
+ *   Send the Port enable request to the f/w
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return Status
+ */
+bfa_status_t
+bfa_port_enable(struct bfa_port_s *port, bfa_port_endis_cbfn_t cbfn,
+		void *cbarg)
+{
+	struct bfi_port_generic_req_s *m;
+
+	/** todo Not implemented */
+	bfa_assert(0);
+
+	if (!bfa_ioc_is_operational(port->ioc)) {
+		bfa_trc(port, BFA_STATUS_IOC_FAILURE);
+		return BFA_STATUS_IOC_FAILURE;
+	}
+
+	if (port->endis_pending) {
+		bfa_trc(port, BFA_STATUS_DEVBUSY);
+		return BFA_STATUS_DEVBUSY;
+	}
+
+	m = (struct bfi_port_generic_req_s *)port->endis_mb.msg;
+
+	port->msgtag++;
+	port->endis_cbfn = cbfn;
+	port->endis_cbarg = cbarg;
+	port->endis_pending = BFA_TRUE;
+
+	bfi_h2i_set(m->mh, BFI_MC_PORT, BFI_PORT_H2I_ENABLE_REQ,
+		    bfa_ioc_portid(port->ioc));
+	bfa_ioc_mbox_queue(port->ioc, &port->endis_mb);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_port_disable()
+ *
+ *   Send the Port disable request to the f/w
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return Status
+ */
+bfa_status_t
+bfa_port_disable(struct bfa_port_s *port, bfa_port_endis_cbfn_t cbfn,
+		 void *cbarg)
+{
+	struct bfi_port_generic_req_s *m;
+
+	/** todo Not implemented */
+	bfa_assert(0);
+
+	if (!bfa_ioc_is_operational(port->ioc)) {
+		bfa_trc(port, BFA_STATUS_IOC_FAILURE);
+		return BFA_STATUS_IOC_FAILURE;
+	}
+
+	if (port->endis_pending) {
+		bfa_trc(port, BFA_STATUS_DEVBUSY);
+		return BFA_STATUS_DEVBUSY;
+	}
+
+	m = (struct bfi_port_generic_req_s *)port->endis_mb.msg;
+
+	port->msgtag++;
+	port->endis_cbfn = cbfn;
+	port->endis_cbarg = cbarg;
+	port->endis_pending = BFA_TRUE;
+
+	bfi_h2i_set(m->mh, BFI_MC_PORT, BFI_PORT_H2I_DISABLE_REQ,
+		    bfa_ioc_portid(port->ioc));
+	bfa_ioc_mbox_queue(port->ioc, &port->endis_mb);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_port_get_stats()
+ *
+ *   Send the request to the f/w to fetch Port statistics.
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return Status
+ */
+bfa_status_t
+bfa_port_get_stats(struct bfa_port_s *port, union bfa_pport_stats_u *stats,
+		   bfa_port_stats_cbfn_t cbfn, void *cbarg)
+{
+	struct bfi_port_get_stats_req_s *m;
+
+	if (!bfa_ioc_is_operational(port->ioc)) {
+		bfa_trc(port, BFA_STATUS_IOC_FAILURE);
+		return BFA_STATUS_IOC_FAILURE;
+	}
+
+	if (port->stats_busy) {
+		bfa_trc(port, BFA_STATUS_DEVBUSY);
+		return BFA_STATUS_DEVBUSY;
+	}
+
+	m = (struct bfi_port_get_stats_req_s *)port->stats_mb.msg;
+
+	port->stats = stats;
+	port->stats_cbfn = cbfn;
+	port->stats_cbarg = cbarg;
+	port->stats_busy = BFA_TRUE;
+	bfa_dma_be_addr_set(m->dma_addr, port->stats_dma.pa);
+
+	bfi_h2i_set(m->mh, BFI_MC_PORT, BFI_PORT_H2I_GET_STATS_REQ,
+		    bfa_ioc_portid(port->ioc));
+	bfa_ioc_mbox_queue(port->ioc, &port->stats_mb);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_port_clear_stats()
+ *
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return Status
+ */
+bfa_status_t
+bfa_port_clear_stats(struct bfa_port_s *port, bfa_port_stats_cbfn_t cbfn,
+		     void *cbarg)
+{
+	struct bfi_port_generic_req_s *m;
+
+	if (!bfa_ioc_is_operational(port->ioc)) {
+		bfa_trc(port, BFA_STATUS_IOC_FAILURE);
+		return BFA_STATUS_IOC_FAILURE;
+	}
+
+	if (port->stats_busy) {
+		bfa_trc(port, BFA_STATUS_DEVBUSY);
+		return BFA_STATUS_DEVBUSY;
+	}
+
+	m = (struct bfi_port_generic_req_s *)port->stats_mb.msg;
+
+	port->stats_cbfn = cbfn;
+	port->stats_cbarg = cbarg;
+	port->stats_busy = BFA_TRUE;
+
+	bfi_h2i_set(m->mh, BFI_MC_PORT, BFI_PORT_H2I_CLEAR_STATS_REQ,
+		    bfa_ioc_portid(port->ioc));
+	bfa_ioc_mbox_queue(port->ioc, &port->stats_mb);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_port_hbfail()
+ *
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return void
+ */
+void
+bfa_port_hbfail(void *arg)
+{
+	struct bfa_port_s *port = (struct bfa_port_s *)arg;
+
+	/*
+	 * Fail any pending get_stats/clear_stats requests
+	 */
+	if (port->stats_busy) {
+		if (port->stats_cbfn)
+			port->stats_cbfn(port->dev, BFA_STATUS_FAILED);
+		port->stats_cbfn = NULL;
+		port->stats_busy = BFA_FALSE;
+	}
+
+	/*
+	 * Clear any enable/disable is pending
+	 */
+	if (port->endis_pending) {
+		if (port->endis_cbfn)
+			port->endis_cbfn(port->dev, BFA_STATUS_FAILED);
+		port->endis_cbfn = NULL;
+		port->endis_pending = BFA_FALSE;
+	}
+}
+
+/**
+ * bfa_port_attach()
+ *
+ *
+ * @param[in] port - Pointer to the Port module data structure
+ *            ioc  - Pointer to the ioc module data structure
+ *            dev  - Pointer to the device driver module data structure
+ *                   The device driver specific mbox ISR functions have
+ *                   this pointer as one of the parameters.
+ *            trcmod -
+ *            logmod -
+ *
+ * @return void
+ */
+void
+bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc, void *dev,
+		struct bfa_trc_mod_s *trcmod, struct bfa_log_mod_s *logmod)
+{
+	bfa_assert(port);
+
+	port->dev = dev;
+	port->ioc = ioc;
+	port->trcmod = trcmod;
+	port->logmod = logmod;
+
+	port->stats_busy = port->endis_pending = BFA_FALSE;
+	port->stats_cbfn = port->endis_cbfn = NULL;
+
+	bfa_ioc_mbox_regisr(port->ioc, BFI_MC_PORT, bfa_port_isr, port);
+	bfa_ioc_hbfail_init(&port->hbfail, bfa_port_hbfail, port);
+	bfa_ioc_hbfail_register(port->ioc, &port->hbfail);
+
+	bfa_trc(port, 0);
+}
+
+/**
+ * bfa_port_detach()
+ *
+ *
+ * @param[in] port - Pointer to the Port module data structure
+ *
+ * @return void
+ */
+void
+bfa_port_detach(struct bfa_port_s *port)
+{
+	bfa_trc(port, 0);
+}
diff --git a/drivers/scsi/bfa/bfa_port_priv.h b/drivers/scsi/bfa/bfa_port_priv.h
new file mode 100644
index 000000000000..4b97e2759908
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_port_priv.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_PORT_PRIV_H__
+#define __BFA_PORT_PRIV_H__
+
+#include <defs/bfa_defs_pport.h>
+#include <bfi/bfi_pport.h>
+#include "bfa_intr_priv.h"
+
+/**
+ * BFA physical port data structure
+ */
+struct bfa_pport_s {
+	struct bfa_s 		*bfa;	/*  parent BFA instance */
+	bfa_sm_t		sm;	/*  port state machine */
+	wwn_t			nwwn;	/*  node wwn of physical port */
+	wwn_t			pwwn;	/*  port wwn of physical oprt */
+	enum bfa_pport_speed speed_sup;
+					/*  supported speeds */
+	enum bfa_pport_speed speed;	/*  current speed */
+	enum bfa_pport_topology topology;	/*  current topology */
+	u8			myalpa;	/*  my ALPA in LOOP topology */
+	u8			rsvd[3];
+	struct bfa_pport_cfg_s	cfg;	/*  current port configuration */
+	struct bfa_qos_attr_s  qos_attr;   /* QoS Attributes */
+	struct bfa_qos_vc_attr_s qos_vc_attr;  /*  VC info from ELP */
+	struct bfa_reqq_wait_s	reqq_wait;
+					/*  to wait for room in reqq */
+	struct bfa_reqq_wait_s	svcreq_wait;
+					/*  to wait for room in reqq */
+	struct bfa_reqq_wait_s	stats_reqq_wait;
+					/*  to wait for room in reqq (stats) */
+	void			*event_cbarg;
+	void			(*event_cbfn) (void *cbarg,
+						bfa_pport_event_t event);
+	union {
+		union bfi_pport_i2h_msg_u i2hmsg;
+	} event_arg;
+	void			*bfad;	/*  BFA driver handle */
+	struct bfa_cb_qe_s		hcb_qe;	/*  BFA callback queue elem */
+	enum bfa_pport_linkstate	hcb_event;
+					/*  link event for callback */
+	u32		msgtag;	/*  fimrware msg tag for reply */
+	u8			*stats_kva;
+	u64		stats_pa;
+	union bfa_pport_stats_u *stats;	/*  pport stats */
+	u32		mypid : 24;
+	u32		rsvd_b : 8;
+	struct bfa_timer_s 	timer;	/*  timer */
+	union bfa_pport_stats_u 	*stats_ret;
+					/*  driver stats location */
+	bfa_status_t		stats_status;
+					/*  stats/statsclr status */
+	bfa_boolean_t   	stats_busy;
+					/*  outstanding stats/statsclr */
+	bfa_boolean_t   	stats_qfull;
+	bfa_boolean_t   	diag_busy;
+					/*  diag busy status */
+	bfa_boolean_t   	beacon;
+					/*  port beacon status */
+	bfa_boolean_t   	link_e2e_beacon;
+					/*  link beacon status */
+	bfa_cb_pport_t		stats_cbfn;
+					/*  driver callback function */
+	void			*stats_cbarg;
+					/* *!< user callback arg */
+};
+
+#define BFA_PORT_MOD(__bfa)	(&(__bfa)->modules.pport)
+
+/*
+ * public functions
+ */
+void	bfa_pport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+#endif /* __BFA_PORT_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_priv.h b/drivers/scsi/bfa/bfa_priv.h
new file mode 100644
index 000000000000..0747a6b26f7b
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_priv.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_PRIV_H__
+#define __BFA_PRIV_H__
+
+#include "bfa_iocfc.h"
+#include "bfa_intr_priv.h"
+#include "bfa_trcmod_priv.h"
+#include "bfa_modules_priv.h"
+#include "bfa_fwimg_priv.h"
+#include <cs/bfa_log.h>
+#include <bfa_timer.h>
+
+/**
+ * Macro to define a new BFA module
+ */
+#define BFA_MODULE(__mod) 						\
+	static void bfa_ ## __mod ## _meminfo(				\
+			struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len,	\
+			u32 *dm_len);      \
+	static void bfa_ ## __mod ## _attach(struct bfa_s *bfa,		\
+			void *bfad, struct bfa_iocfc_cfg_s *cfg, 	\
+			struct bfa_meminfo_s *meminfo,			\
+			struct bfa_pcidev_s *pcidev);      \
+	static void bfa_ ## __mod ## _initdone(struct bfa_s *bfa);      \
+	static void bfa_ ## __mod ## _detach(struct bfa_s *bfa);      \
+	static void bfa_ ## __mod ## _start(struct bfa_s *bfa);      \
+	static void bfa_ ## __mod ## _stop(struct bfa_s *bfa);      \
+	static void bfa_ ## __mod ## _iocdisable(struct bfa_s *bfa);      \
+									\
+	extern struct bfa_module_s hal_mod_ ## __mod;			\
+	struct bfa_module_s hal_mod_ ## __mod = {			\
+		bfa_ ## __mod ## _meminfo,				\
+		bfa_ ## __mod ## _attach,				\
+		bfa_ ## __mod ## _initdone,				\
+		bfa_ ## __mod ## _detach,				\
+		bfa_ ## __mod ## _start,				\
+		bfa_ ## __mod ## _stop,					\
+		bfa_ ## __mod ## _iocdisable,				\
+	}
+
+#define BFA_CACHELINE_SZ	(256)
+
+/**
+ * Structure used to interact between different BFA sub modules
+ *
+ * Each sub module needs to implement only the entry points relevant to it (and
+ * can leave entry points as NULL)
+ */
+struct bfa_module_s {
+	void (*meminfo) (struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+			u32 *dm_len);
+	void (*attach) (struct bfa_s *bfa, void *bfad,
+			struct bfa_iocfc_cfg_s *cfg,
+			struct bfa_meminfo_s *meminfo,
+			struct bfa_pcidev_s *pcidev);
+	void (*initdone) (struct bfa_s *bfa);
+	void (*detach) (struct bfa_s *bfa);
+	void (*start) (struct bfa_s *bfa);
+	void (*stop) (struct bfa_s *bfa);
+	void (*iocdisable) (struct bfa_s *bfa);
+};
+
+extern struct bfa_module_s *hal_mods[];
+
+struct bfa_s {
+	void			*bfad;		/*  BFA driver instance    */
+	struct bfa_aen_s	*aen;		/*  AEN module		    */
+	struct bfa_plog_s	*plog;		/*  portlog buffer	    */
+	struct bfa_log_mod_s	*logm;		/*  driver logging modulen */
+	struct bfa_trc_mod_s	*trcmod;	/*  driver tracing	    */
+	struct bfa_ioc_s	ioc;		/*  IOC module		    */
+	struct bfa_iocfc_s	iocfc;		/*  IOCFC module	    */
+	struct bfa_timer_mod_s	timer_mod;	/*  timer module	    */
+	struct bfa_modules_s	modules;	/*  BFA modules	    */
+	struct list_head	comp_q;		/*  pending completions    */
+	bfa_boolean_t		rme_process;	/*  RME processing enabled */
+	struct list_head		reqq_waitq[BFI_IOC_MAX_CQS];
+	bfa_boolean_t		fcs;		/*  FCS is attached to BFA */
+	struct bfa_msix_s	msix;
+};
+
+extern bfa_isr_func_t bfa_isrs[BFI_MC_MAX];
+extern bfa_ioc_mbox_mcfunc_t  bfa_mbox_isrs[];
+extern bfa_boolean_t bfa_auto_recover;
+extern struct bfa_module_s hal_mod_flash;
+extern struct bfa_module_s hal_mod_fcdiag;
+extern struct bfa_module_s hal_mod_sgpg;
+extern struct bfa_module_s hal_mod_pport;
+extern struct bfa_module_s hal_mod_fcxp;
+extern struct bfa_module_s hal_mod_lps;
+extern struct bfa_module_s hal_mod_uf;
+extern struct bfa_module_s hal_mod_rport;
+extern struct bfa_module_s hal_mod_fcpim;
+extern struct bfa_module_s hal_mod_pbind;
+
+#endif /* __BFA_PRIV_H__ */
+
diff --git a/drivers/scsi/bfa/bfa_rport.c b/drivers/scsi/bfa/bfa_rport.c
new file mode 100644
index 000000000000..16da77a8db28
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_rport.c
@@ -0,0 +1,911 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <cs/bfa_debug.h>
+#include <bfi/bfi_rport.h>
+#include "bfa_intr_priv.h"
+
+BFA_TRC_FILE(HAL, RPORT);
+BFA_MODULE(rport);
+
+#define bfa_rport_offline_cb(__rp) do {				\
+	if ((__rp)->bfa->fcs)						\
+		bfa_cb_rport_offline((__rp)->rport_drv);      \
+	else {								\
+		bfa_cb_queue((__rp)->bfa, &(__rp)->hcb_qe,		\
+				__bfa_cb_rport_offline, (__rp));      \
+	}								\
+} while (0)
+
+#define bfa_rport_online_cb(__rp) do {				\
+	if ((__rp)->bfa->fcs)						\
+		bfa_cb_rport_online((__rp)->rport_drv);      \
+	else {								\
+		bfa_cb_queue((__rp)->bfa, &(__rp)->hcb_qe,		\
+				  __bfa_cb_rport_online, (__rp));      \
+		}							\
+} while (0)
+
+/*
+ * forward declarations
+ */
+static struct bfa_rport_s *bfa_rport_alloc(struct bfa_rport_mod_s *rp_mod);
+static void bfa_rport_free(struct bfa_rport_s *rport);
+static bfa_boolean_t bfa_rport_send_fwcreate(struct bfa_rport_s *rp);
+static bfa_boolean_t bfa_rport_send_fwdelete(struct bfa_rport_s *rp);
+static bfa_boolean_t bfa_rport_send_fwspeed(struct bfa_rport_s *rp);
+static void __bfa_cb_rport_online(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_rport_offline(void *cbarg, bfa_boolean_t complete);
+
+/**
+ *  bfa_rport_sm BFA rport state machine
+ */
+
+
+enum bfa_rport_event {
+	BFA_RPORT_SM_CREATE	= 1,	/*  rport create event		*/
+	BFA_RPORT_SM_DELETE	= 2,	/*  deleting an existing rport */
+	BFA_RPORT_SM_ONLINE	= 3,	/*  rport is online		*/
+	BFA_RPORT_SM_OFFLINE	= 4,	/*  rport is offline		*/
+	BFA_RPORT_SM_FWRSP	= 5,	/*  firmware response		*/
+	BFA_RPORT_SM_HWFAIL	= 6,	/*  IOC h/w failure		*/
+	BFA_RPORT_SM_QOS_SCN	= 7,	/*  QoS SCN from firmware	*/
+	BFA_RPORT_SM_SET_SPEED	= 8,	/*  Set Rport Speed 		*/
+	BFA_RPORT_SM_QRESUME	= 9,	/*  space in requeue queue	*/
+};
+
+static void	bfa_rport_sm_uninit(struct bfa_rport_s *rp,
+					enum bfa_rport_event event);
+static void	bfa_rport_sm_created(struct bfa_rport_s *rp,
+					 enum bfa_rport_event event);
+static void	bfa_rport_sm_fwcreate(struct bfa_rport_s *rp,
+					  enum bfa_rport_event event);
+static void	bfa_rport_sm_online(struct bfa_rport_s *rp,
+					enum bfa_rport_event event);
+static void	bfa_rport_sm_fwdelete(struct bfa_rport_s *rp,
+					  enum bfa_rport_event event);
+static void	bfa_rport_sm_offline(struct bfa_rport_s *rp,
+					 enum bfa_rport_event event);
+static void	bfa_rport_sm_deleting(struct bfa_rport_s *rp,
+					  enum bfa_rport_event event);
+static void	bfa_rport_sm_offline_pending(struct bfa_rport_s *rp,
+					  enum bfa_rport_event event);
+static void	bfa_rport_sm_delete_pending(struct bfa_rport_s *rp,
+					  enum bfa_rport_event event);
+static void	bfa_rport_sm_iocdisable(struct bfa_rport_s *rp,
+					    enum bfa_rport_event event);
+static void	bfa_rport_sm_fwcreate_qfull(struct bfa_rport_s *rp,
+					  enum bfa_rport_event event);
+static void	bfa_rport_sm_fwdelete_qfull(struct bfa_rport_s *rp,
+					  enum bfa_rport_event event);
+static void	bfa_rport_sm_deleting_qfull(struct bfa_rport_s *rp,
+					  enum bfa_rport_event event);
+
+/**
+ * Beginning state, only online event expected.
+ */
+static void
+bfa_rport_sm_uninit(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_CREATE:
+		bfa_stats(rp, sm_un_cr);
+		bfa_sm_set_state(rp, bfa_rport_sm_created);
+		break;
+
+	default:
+		bfa_stats(rp, sm_un_unexp);
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_rport_sm_created(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_ONLINE:
+		bfa_stats(rp, sm_cr_on);
+		if (bfa_rport_send_fwcreate(rp))
+			bfa_sm_set_state(rp, bfa_rport_sm_fwcreate);
+		else
+			bfa_sm_set_state(rp, bfa_rport_sm_fwcreate_qfull);
+		break;
+
+	case BFA_RPORT_SM_DELETE:
+		bfa_stats(rp, sm_cr_del);
+		bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+		bfa_rport_free(rp);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_cr_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+		break;
+
+	default:
+		bfa_stats(rp, sm_cr_unexp);
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Waiting for rport create response from firmware.
+ */
+static void
+bfa_rport_sm_fwcreate(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_FWRSP:
+		bfa_stats(rp, sm_fwc_rsp);
+		bfa_sm_set_state(rp, bfa_rport_sm_online);
+		bfa_rport_online_cb(rp);
+		break;
+
+	case BFA_RPORT_SM_DELETE:
+		bfa_stats(rp, sm_fwc_del);
+		bfa_sm_set_state(rp, bfa_rport_sm_delete_pending);
+		break;
+
+	case BFA_RPORT_SM_OFFLINE:
+		bfa_stats(rp, sm_fwc_off);
+		bfa_sm_set_state(rp, bfa_rport_sm_offline_pending);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_fwc_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+		break;
+
+	default:
+		bfa_stats(rp, sm_fwc_unexp);
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Request queue is full, awaiting queue resume to send create request.
+ */
+static void
+bfa_rport_sm_fwcreate_qfull(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_QRESUME:
+		bfa_sm_set_state(rp, bfa_rport_sm_fwcreate);
+		bfa_rport_send_fwcreate(rp);
+		break;
+
+	case BFA_RPORT_SM_DELETE:
+		bfa_stats(rp, sm_fwc_del);
+		bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+		bfa_reqq_wcancel(&rp->reqq_wait);
+		bfa_rport_free(rp);
+		break;
+
+	case BFA_RPORT_SM_OFFLINE:
+		bfa_stats(rp, sm_fwc_off);
+		bfa_sm_set_state(rp, bfa_rport_sm_offline);
+		bfa_reqq_wcancel(&rp->reqq_wait);
+		bfa_rport_offline_cb(rp);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_fwc_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+		bfa_reqq_wcancel(&rp->reqq_wait);
+		break;
+
+	default:
+		bfa_stats(rp, sm_fwc_unexp);
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Online state - normal parking state.
+ */
+static void
+bfa_rport_sm_online(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	struct bfi_rport_qos_scn_s *qos_scn;
+
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_OFFLINE:
+		bfa_stats(rp, sm_on_off);
+		if (bfa_rport_send_fwdelete(rp))
+			bfa_sm_set_state(rp, bfa_rport_sm_fwdelete);
+		else
+			bfa_sm_set_state(rp, bfa_rport_sm_fwdelete_qfull);
+		break;
+
+	case BFA_RPORT_SM_DELETE:
+		bfa_stats(rp, sm_on_del);
+		if (bfa_rport_send_fwdelete(rp))
+			bfa_sm_set_state(rp, bfa_rport_sm_deleting);
+		else
+			bfa_sm_set_state(rp, bfa_rport_sm_deleting_qfull);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_on_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+		break;
+
+	case BFA_RPORT_SM_SET_SPEED:
+		bfa_rport_send_fwspeed(rp);
+		break;
+
+	case BFA_RPORT_SM_QOS_SCN:
+		qos_scn = (struct bfi_rport_qos_scn_s *) rp->event_arg.fw_msg;
+		rp->qos_attr = qos_scn->new_qos_attr;
+		bfa_trc(rp->bfa, qos_scn->old_qos_attr.qos_flow_id);
+		bfa_trc(rp->bfa, qos_scn->new_qos_attr.qos_flow_id);
+		bfa_trc(rp->bfa, qos_scn->old_qos_attr.qos_priority);
+		bfa_trc(rp->bfa, qos_scn->new_qos_attr.qos_priority);
+
+		qos_scn->old_qos_attr.qos_flow_id  =
+			bfa_os_ntohl(qos_scn->old_qos_attr.qos_flow_id);
+		qos_scn->new_qos_attr.qos_flow_id  =
+			bfa_os_ntohl(qos_scn->new_qos_attr.qos_flow_id);
+		qos_scn->old_qos_attr.qos_priority =
+			bfa_os_ntohl(qos_scn->old_qos_attr.qos_priority);
+		qos_scn->new_qos_attr.qos_priority =
+			bfa_os_ntohl(qos_scn->new_qos_attr.qos_priority);
+
+		if (qos_scn->old_qos_attr.qos_flow_id !=
+			qos_scn->new_qos_attr.qos_flow_id)
+			bfa_cb_rport_qos_scn_flowid(rp->rport_drv,
+						    qos_scn->old_qos_attr,
+						    qos_scn->new_qos_attr);
+		if (qos_scn->old_qos_attr.qos_priority !=
+			qos_scn->new_qos_attr.qos_priority)
+			bfa_cb_rport_qos_scn_prio(rp->rport_drv,
+						  qos_scn->old_qos_attr,
+						  qos_scn->new_qos_attr);
+		break;
+
+	default:
+		bfa_stats(rp, sm_on_unexp);
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Firmware rport is being deleted - awaiting f/w response.
+ */
+static void
+bfa_rport_sm_fwdelete(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_FWRSP:
+		bfa_stats(rp, sm_fwd_rsp);
+		bfa_sm_set_state(rp, bfa_rport_sm_offline);
+		bfa_rport_offline_cb(rp);
+		break;
+
+	case BFA_RPORT_SM_DELETE:
+		bfa_stats(rp, sm_fwd_del);
+		bfa_sm_set_state(rp, bfa_rport_sm_deleting);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_fwd_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+		bfa_rport_offline_cb(rp);
+		break;
+
+	default:
+		bfa_stats(rp, sm_fwd_unexp);
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_rport_sm_fwdelete_qfull(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_QRESUME:
+		bfa_sm_set_state(rp, bfa_rport_sm_fwdelete);
+		bfa_rport_send_fwdelete(rp);
+		break;
+
+	case BFA_RPORT_SM_DELETE:
+		bfa_stats(rp, sm_fwd_del);
+		bfa_sm_set_state(rp, bfa_rport_sm_deleting_qfull);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_fwd_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+		bfa_reqq_wcancel(&rp->reqq_wait);
+		bfa_rport_offline_cb(rp);
+		break;
+
+	default:
+		bfa_stats(rp, sm_fwd_unexp);
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Offline state.
+ */
+static void
+bfa_rport_sm_offline(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_DELETE:
+		bfa_stats(rp, sm_off_del);
+		bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+		bfa_rport_free(rp);
+		break;
+
+	case BFA_RPORT_SM_ONLINE:
+		bfa_stats(rp, sm_off_on);
+		if (bfa_rport_send_fwcreate(rp))
+			bfa_sm_set_state(rp, bfa_rport_sm_fwcreate);
+		else
+			bfa_sm_set_state(rp, bfa_rport_sm_fwcreate_qfull);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_off_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+		break;
+
+	default:
+		bfa_stats(rp, sm_off_unexp);
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Rport is deleted, waiting for firmware response to delete.
+ */
+static void
+bfa_rport_sm_deleting(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_FWRSP:
+		bfa_stats(rp, sm_del_fwrsp);
+		bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+		bfa_rport_free(rp);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_del_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+		bfa_rport_free(rp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_rport_sm_deleting_qfull(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_QRESUME:
+		bfa_stats(rp, sm_del_fwrsp);
+		bfa_sm_set_state(rp, bfa_rport_sm_deleting);
+		bfa_rport_send_fwdelete(rp);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_del_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+		bfa_reqq_wcancel(&rp->reqq_wait);
+		bfa_rport_free(rp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Waiting for rport create response from firmware. A delete is pending.
+ */
+static void
+bfa_rport_sm_delete_pending(struct bfa_rport_s *rp,
+				enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_FWRSP:
+		bfa_stats(rp, sm_delp_fwrsp);
+		if (bfa_rport_send_fwdelete(rp))
+			bfa_sm_set_state(rp, bfa_rport_sm_deleting);
+		else
+			bfa_sm_set_state(rp, bfa_rport_sm_deleting_qfull);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_delp_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+		bfa_rport_free(rp);
+		break;
+
+	default:
+		bfa_stats(rp, sm_delp_unexp);
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Waiting for rport create response from firmware. Rport offline is pending.
+ */
+static void
+bfa_rport_sm_offline_pending(struct bfa_rport_s *rp,
+				 enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_FWRSP:
+		bfa_stats(rp, sm_offp_fwrsp);
+		if (bfa_rport_send_fwdelete(rp))
+			bfa_sm_set_state(rp, bfa_rport_sm_fwdelete);
+		else
+			bfa_sm_set_state(rp, bfa_rport_sm_fwdelete_qfull);
+		break;
+
+	case BFA_RPORT_SM_DELETE:
+		bfa_stats(rp, sm_offp_del);
+		bfa_sm_set_state(rp, bfa_rport_sm_delete_pending);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		bfa_stats(rp, sm_offp_hwf);
+		bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+		break;
+
+	default:
+		bfa_stats(rp, sm_offp_unexp);
+		bfa_assert(0);
+	}
+}
+
+/**
+ * IOC h/w failed.
+ */
+static void
+bfa_rport_sm_iocdisable(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+	bfa_trc(rp->bfa, rp->rport_tag);
+	bfa_trc(rp->bfa, event);
+
+	switch (event) {
+	case BFA_RPORT_SM_OFFLINE:
+		bfa_stats(rp, sm_iocd_off);
+		bfa_rport_offline_cb(rp);
+		break;
+
+	case BFA_RPORT_SM_DELETE:
+		bfa_stats(rp, sm_iocd_del);
+		bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+		bfa_rport_free(rp);
+		break;
+
+	case BFA_RPORT_SM_ONLINE:
+		bfa_stats(rp, sm_iocd_on);
+		if (bfa_rport_send_fwcreate(rp))
+			bfa_sm_set_state(rp, bfa_rport_sm_fwcreate);
+		else
+			bfa_sm_set_state(rp, bfa_rport_sm_fwcreate_qfull);
+		break;
+
+	case BFA_RPORT_SM_HWFAIL:
+		break;
+
+	default:
+		bfa_stats(rp, sm_iocd_unexp);
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  bfa_rport_private BFA rport private functions
+ */
+
+static void
+__bfa_cb_rport_online(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_rport_s *rp = cbarg;
+
+	if (complete)
+		bfa_cb_rport_online(rp->rport_drv);
+}
+
+static void
+__bfa_cb_rport_offline(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_rport_s *rp = cbarg;
+
+	if (complete)
+		bfa_cb_rport_offline(rp->rport_drv);
+}
+
+static void
+bfa_rport_qresume(void *cbarg)
+{
+	struct bfa_rport_s	*rp = cbarg;
+
+	bfa_sm_send_event(rp, BFA_RPORT_SM_QRESUME);
+}
+
+static void
+bfa_rport_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+		u32 *dm_len)
+{
+	if (cfg->fwcfg.num_rports < BFA_RPORT_MIN)
+		cfg->fwcfg.num_rports = BFA_RPORT_MIN;
+
+	*km_len += cfg->fwcfg.num_rports * sizeof(struct bfa_rport_s);
+}
+
+static void
+bfa_rport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+		     struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+	struct bfa_rport_mod_s *mod = BFA_RPORT_MOD(bfa);
+	struct bfa_rport_s *rp;
+	u16        i;
+
+	INIT_LIST_HEAD(&mod->rp_free_q);
+	INIT_LIST_HEAD(&mod->rp_active_q);
+
+	rp = (struct bfa_rport_s *) bfa_meminfo_kva(meminfo);
+	mod->rps_list = rp;
+	mod->num_rports = cfg->fwcfg.num_rports;
+
+	bfa_assert(mod->num_rports
+		   && !(mod->num_rports & (mod->num_rports - 1)));
+
+	for (i = 0; i < mod->num_rports; i++, rp++) {
+		bfa_os_memset(rp, 0, sizeof(struct bfa_rport_s));
+		rp->bfa = bfa;
+		rp->rport_tag = i;
+		bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+
+		/**
+		 *  - is unused
+		 */
+		if (i)
+			list_add_tail(&rp->qe, &mod->rp_free_q);
+
+		bfa_reqq_winit(&rp->reqq_wait, bfa_rport_qresume, rp);
+	}
+
+	/**
+	 * consume memory
+	 */
+	bfa_meminfo_kva(meminfo) = (u8 *) rp;
+}
+
+static void
+bfa_rport_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_rport_detach(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_rport_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_rport_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_rport_iocdisable(struct bfa_s *bfa)
+{
+	struct bfa_rport_mod_s *mod = BFA_RPORT_MOD(bfa);
+	struct bfa_rport_s *rport;
+	struct list_head        *qe, *qen;
+
+	list_for_each_safe(qe, qen, &mod->rp_active_q) {
+		rport = (struct bfa_rport_s *) qe;
+		bfa_sm_send_event(rport, BFA_RPORT_SM_HWFAIL);
+	}
+}
+
+static struct bfa_rport_s *
+bfa_rport_alloc(struct bfa_rport_mod_s *mod)
+{
+	struct bfa_rport_s *rport;
+
+	bfa_q_deq(&mod->rp_free_q, &rport);
+	if (rport)
+		list_add_tail(&rport->qe, &mod->rp_active_q);
+
+	return (rport);
+}
+
+static void
+bfa_rport_free(struct bfa_rport_s *rport)
+{
+	struct bfa_rport_mod_s *mod = BFA_RPORT_MOD(rport->bfa);
+
+	bfa_assert(bfa_q_is_on_q(&mod->rp_active_q, rport));
+	list_del(&rport->qe);
+	list_add_tail(&rport->qe, &mod->rp_free_q);
+}
+
+static bfa_boolean_t
+bfa_rport_send_fwcreate(struct bfa_rport_s *rp)
+{
+	struct bfi_rport_create_req_s *m;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(rp->bfa, BFA_REQQ_RPORT);
+	if (!m) {
+		bfa_reqq_wait(rp->bfa, BFA_REQQ_RPORT, &rp->reqq_wait);
+		return BFA_FALSE;
+	}
+
+	bfi_h2i_set(m->mh, BFI_MC_RPORT, BFI_RPORT_H2I_CREATE_REQ,
+			bfa_lpuid(rp->bfa));
+	m->bfa_handle = rp->rport_tag;
+	m->max_frmsz = bfa_os_htons(rp->rport_info.max_frmsz);
+	m->pid = rp->rport_info.pid;
+	m->lp_tag = rp->rport_info.lp_tag;
+	m->local_pid = rp->rport_info.local_pid;
+	m->fc_class = rp->rport_info.fc_class;
+	m->vf_en = rp->rport_info.vf_en;
+	m->vf_id = rp->rport_info.vf_id;
+	m->cisc = rp->rport_info.cisc;
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(rp->bfa, BFA_REQQ_RPORT);
+	return BFA_TRUE;
+}
+
+static bfa_boolean_t
+bfa_rport_send_fwdelete(struct bfa_rport_s *rp)
+{
+	struct bfi_rport_delete_req_s *m;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(rp->bfa, BFA_REQQ_RPORT);
+	if (!m) {
+		bfa_reqq_wait(rp->bfa, BFA_REQQ_RPORT, &rp->reqq_wait);
+		return BFA_FALSE;
+	}
+
+	bfi_h2i_set(m->mh, BFI_MC_RPORT, BFI_RPORT_H2I_DELETE_REQ,
+			bfa_lpuid(rp->bfa));
+	m->fw_handle = rp->fw_handle;
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(rp->bfa, BFA_REQQ_RPORT);
+	return BFA_TRUE;
+}
+
+static bfa_boolean_t
+bfa_rport_send_fwspeed(struct bfa_rport_s *rp)
+{
+	struct bfa_rport_speed_req_s *m;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(rp->bfa, BFA_REQQ_RPORT);
+	if (!m) {
+		bfa_trc(rp->bfa, rp->rport_info.speed);
+		return BFA_FALSE;
+	}
+
+	bfi_h2i_set(m->mh, BFI_MC_RPORT, BFI_RPORT_H2I_SET_SPEED_REQ,
+			bfa_lpuid(rp->bfa));
+	m->fw_handle = rp->fw_handle;
+	m->speed = (u8)rp->rport_info.speed;
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(rp->bfa, BFA_REQQ_RPORT);
+	return BFA_TRUE;
+}
+
+
+
+/**
+ *  bfa_rport_public
+ */
+
+/**
+ * 		Rport interrupt processing.
+ */
+void
+bfa_rport_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+	union bfi_rport_i2h_msg_u msg;
+	struct bfa_rport_s *rp;
+
+	bfa_trc(bfa, m->mhdr.msg_id);
+
+	msg.msg = m;
+
+	switch (m->mhdr.msg_id) {
+	case BFI_RPORT_I2H_CREATE_RSP:
+		rp = BFA_RPORT_FROM_TAG(bfa, msg.create_rsp->bfa_handle);
+		rp->fw_handle = msg.create_rsp->fw_handle;
+		rp->qos_attr = msg.create_rsp->qos_attr;
+		bfa_assert(msg.create_rsp->status == BFA_STATUS_OK);
+		bfa_sm_send_event(rp, BFA_RPORT_SM_FWRSP);
+		break;
+
+	case BFI_RPORT_I2H_DELETE_RSP:
+		rp = BFA_RPORT_FROM_TAG(bfa, msg.delete_rsp->bfa_handle);
+		bfa_assert(msg.delete_rsp->status == BFA_STATUS_OK);
+		bfa_sm_send_event(rp, BFA_RPORT_SM_FWRSP);
+		break;
+
+	case BFI_RPORT_I2H_QOS_SCN:
+		rp = BFA_RPORT_FROM_TAG(bfa, msg.qos_scn_evt->bfa_handle);
+		rp->event_arg.fw_msg = msg.qos_scn_evt;
+		bfa_sm_send_event(rp, BFA_RPORT_SM_QOS_SCN);
+		break;
+
+	default:
+		bfa_trc(bfa, m->mhdr.msg_id);
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  bfa_rport_api
+ */
+
+struct bfa_rport_s *
+bfa_rport_create(struct bfa_s *bfa, void *rport_drv)
+{
+	struct bfa_rport_s *rp;
+
+	rp = bfa_rport_alloc(BFA_RPORT_MOD(bfa));
+
+	if (rp == NULL)
+		return (NULL);
+
+	rp->bfa = bfa;
+	rp->rport_drv = rport_drv;
+	bfa_rport_clear_stats(rp);
+
+	bfa_assert(bfa_sm_cmp_state(rp, bfa_rport_sm_uninit));
+	bfa_sm_send_event(rp, BFA_RPORT_SM_CREATE);
+
+	return (rp);
+}
+
+void
+bfa_rport_delete(struct bfa_rport_s *rport)
+{
+	bfa_sm_send_event(rport, BFA_RPORT_SM_DELETE);
+}
+
+void
+bfa_rport_online(struct bfa_rport_s *rport, struct bfa_rport_info_s *rport_info)
+{
+	bfa_assert(rport_info->max_frmsz != 0);
+
+	/**
+	 * Some JBODs are seen to be not setting PDU size correctly in PLOGI
+	 * responses. Default to minimum size.
+	 */
+	if (rport_info->max_frmsz == 0) {
+		bfa_trc(rport->bfa, rport->rport_tag);
+		rport_info->max_frmsz = FC_MIN_PDUSZ;
+	}
+
+	bfa_os_assign(rport->rport_info, *rport_info);
+	bfa_sm_send_event(rport, BFA_RPORT_SM_ONLINE);
+}
+
+void
+bfa_rport_offline(struct bfa_rport_s *rport)
+{
+	bfa_sm_send_event(rport, BFA_RPORT_SM_OFFLINE);
+}
+
+void
+bfa_rport_speed(struct bfa_rport_s *rport, enum bfa_pport_speed speed)
+{
+	bfa_assert(speed != 0);
+	bfa_assert(speed != BFA_PPORT_SPEED_AUTO);
+
+	rport->rport_info.speed = speed;
+	bfa_sm_send_event(rport, BFA_RPORT_SM_SET_SPEED);
+}
+
+void
+bfa_rport_get_stats(struct bfa_rport_s *rport,
+	struct bfa_rport_hal_stats_s *stats)
+{
+	*stats = rport->stats;
+}
+
+void
+bfa_rport_get_qos_attr(struct bfa_rport_s *rport,
+					struct bfa_rport_qos_attr_s *qos_attr)
+{
+	qos_attr->qos_priority  = bfa_os_ntohl(rport->qos_attr.qos_priority);
+	qos_attr->qos_flow_id  = bfa_os_ntohl(rport->qos_attr.qos_flow_id);
+
+}
+
+void
+bfa_rport_clear_stats(struct bfa_rport_s *rport)
+{
+	bfa_os_memset(&rport->stats, 0, sizeof(rport->stats));
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_rport_priv.h b/drivers/scsi/bfa/bfa_rport_priv.h
new file mode 100644
index 000000000000..6490ce2e990d
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_rport_priv.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_RPORT_PRIV_H__
+#define __BFA_RPORT_PRIV_H__
+
+#include <bfa_svc.h>
+
+#define BFA_RPORT_MIN	4
+
+struct bfa_rport_mod_s {
+	struct bfa_rport_s *rps_list;	/*  list of rports	*/
+	struct list_head 	rp_free_q;	/*  free bfa_rports	*/
+	struct list_head 	rp_active_q;	/*  free bfa_rports 	*/
+	u16	num_rports;	/*  number of rports	*/
+};
+
+#define BFA_RPORT_MOD(__bfa)	(&(__bfa)->modules.rport_mod)
+
+/**
+ * Convert rport tag to RPORT
+ */
+#define BFA_RPORT_FROM_TAG(__bfa, _tag)				\
+	(BFA_RPORT_MOD(__bfa)->rps_list +				\
+	 ((_tag) & (BFA_RPORT_MOD(__bfa)->num_rports - 1)))
+
+/*
+ * external functions
+ */
+void	bfa_rport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+#endif /* __BFA_RPORT_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_sgpg.c b/drivers/scsi/bfa/bfa_sgpg.c
new file mode 100644
index 000000000000..279d8f9b8907
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_sgpg.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+
+BFA_TRC_FILE(HAL, SGPG);
+BFA_MODULE(sgpg);
+
+/**
+ *  bfa_sgpg_mod BFA SGPG Mode module
+ */
+
+/**
+ * Compute and return memory needed by FCP(im) module.
+ */
+static void
+bfa_sgpg_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+		u32 *dm_len)
+{
+	if (cfg->drvcfg.num_sgpgs < BFA_SGPG_MIN)
+		cfg->drvcfg.num_sgpgs = BFA_SGPG_MIN;
+
+	*km_len += (cfg->drvcfg.num_sgpgs + 1) * sizeof(struct bfa_sgpg_s);
+	*dm_len += (cfg->drvcfg.num_sgpgs + 1) * sizeof(struct bfi_sgpg_s);
+}
+
+
+static void
+bfa_sgpg_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+		    struct bfa_meminfo_s *minfo, struct bfa_pcidev_s *pcidev)
+{
+	struct bfa_sgpg_mod_s	*mod = BFA_SGPG_MOD(bfa);
+	int				i;
+	struct bfa_sgpg_s		*hsgpg;
+	struct bfi_sgpg_s 	*sgpg;
+	u64		align_len;
+
+	union {
+		u64        pa;
+		union bfi_addr_u      addr;
+	} sgpg_pa;
+
+	INIT_LIST_HEAD(&mod->sgpg_q);
+	INIT_LIST_HEAD(&mod->sgpg_wait_q);
+
+	bfa_trc(bfa, cfg->drvcfg.num_sgpgs);
+
+	mod->num_sgpgs = cfg->drvcfg.num_sgpgs;
+	mod->sgpg_arr_pa = bfa_meminfo_dma_phys(minfo);
+	align_len = (BFA_SGPG_ROUNDUP(mod->sgpg_arr_pa) - mod->sgpg_arr_pa);
+	mod->sgpg_arr_pa += align_len;
+	mod->hsgpg_arr = (struct bfa_sgpg_s *) (bfa_meminfo_kva(minfo) +
+						align_len);
+	mod->sgpg_arr = (struct bfi_sgpg_s *) (bfa_meminfo_dma_virt(minfo) +
+						align_len);
+
+	hsgpg = mod->hsgpg_arr;
+	sgpg = mod->sgpg_arr;
+	sgpg_pa.pa = mod->sgpg_arr_pa;
+	mod->free_sgpgs = mod->num_sgpgs;
+
+	bfa_assert(!(sgpg_pa.pa & (sizeof(struct bfi_sgpg_s) - 1)));
+
+	for (i = 0; i < mod->num_sgpgs; i++) {
+		bfa_os_memset(hsgpg, 0, sizeof(*hsgpg));
+		bfa_os_memset(sgpg, 0, sizeof(*sgpg));
+
+		hsgpg->sgpg = sgpg;
+		hsgpg->sgpg_pa = sgpg_pa.addr;
+		list_add_tail(&hsgpg->qe, &mod->sgpg_q);
+
+		hsgpg++;
+		sgpg++;
+		sgpg_pa.pa += sizeof(struct bfi_sgpg_s);
+	}
+
+	bfa_meminfo_kva(minfo) = (u8 *) hsgpg;
+	bfa_meminfo_dma_virt(minfo) = (u8 *) sgpg;
+	bfa_meminfo_dma_phys(minfo) = sgpg_pa.pa;
+}
+
+static void
+bfa_sgpg_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_sgpg_detach(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_sgpg_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_sgpg_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_sgpg_iocdisable(struct bfa_s *bfa)
+{
+}
+
+
+
+/**
+ *  bfa_sgpg_public BFA SGPG public functions
+ */
+
+bfa_status_t
+bfa_sgpg_malloc(struct bfa_s *bfa, struct list_head *sgpg_q, int nsgpgs)
+{
+	struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
+	struct bfa_sgpg_s *hsgpg;
+	int             i;
+
+	bfa_trc_fp(bfa, nsgpgs);
+
+	if (mod->free_sgpgs < nsgpgs)
+		return BFA_STATUS_ENOMEM;
+
+	for (i = 0; i < nsgpgs; i++) {
+		bfa_q_deq(&mod->sgpg_q, &hsgpg);
+		bfa_assert(hsgpg);
+		list_add_tail(&hsgpg->qe, sgpg_q);
+	}
+
+	mod->free_sgpgs -= nsgpgs;
+	return BFA_STATUS_OK;
+}
+
+void
+bfa_sgpg_mfree(struct bfa_s *bfa, struct list_head *sgpg_q, int nsgpg)
+{
+	struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
+	struct bfa_sgpg_wqe_s *wqe;
+
+	bfa_trc_fp(bfa, nsgpg);
+
+	mod->free_sgpgs += nsgpg;
+	bfa_assert(mod->free_sgpgs <= mod->num_sgpgs);
+
+	list_splice_tail_init(sgpg_q, &mod->sgpg_q);
+
+	if (list_empty(&mod->sgpg_wait_q))
+		return;
+
+	/**
+	 * satisfy as many waiting requests as possible
+	 */
+	do {
+		wqe = bfa_q_first(&mod->sgpg_wait_q);
+		if (mod->free_sgpgs < wqe->nsgpg)
+			nsgpg = mod->free_sgpgs;
+		else
+			nsgpg = wqe->nsgpg;
+		bfa_sgpg_malloc(bfa, &wqe->sgpg_q, nsgpg);
+		wqe->nsgpg -= nsgpg;
+		if (wqe->nsgpg == 0) {
+			list_del(&wqe->qe);
+			wqe->cbfn(wqe->cbarg);
+		}
+	} while (mod->free_sgpgs && !list_empty(&mod->sgpg_wait_q));
+}
+
+void
+bfa_sgpg_wait(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe, int nsgpg)
+{
+	struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
+
+	bfa_assert(nsgpg > 0);
+	bfa_assert(nsgpg > mod->free_sgpgs);
+
+	wqe->nsgpg_total = wqe->nsgpg = nsgpg;
+
+	/**
+	 * allocate any left to this one first
+	 */
+	if (mod->free_sgpgs) {
+		/**
+		 * no one else is waiting for SGPG
+		 */
+		bfa_assert(list_empty(&mod->sgpg_wait_q));
+		list_splice_tail_init(&mod->sgpg_q, &wqe->sgpg_q);
+		wqe->nsgpg -= mod->free_sgpgs;
+		mod->free_sgpgs = 0;
+	}
+
+	list_add_tail(&wqe->qe, &mod->sgpg_wait_q);
+}
+
+void
+bfa_sgpg_wcancel(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe)
+{
+	struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
+
+	bfa_assert(bfa_q_is_on_q(&mod->sgpg_wait_q, wqe));
+	list_del(&wqe->qe);
+
+	if (wqe->nsgpg_total != wqe->nsgpg)
+		bfa_sgpg_mfree(bfa, &wqe->sgpg_q,
+				   wqe->nsgpg_total - wqe->nsgpg);
+}
+
+void
+bfa_sgpg_winit(struct bfa_sgpg_wqe_s *wqe, void (*cbfn) (void *cbarg),
+		   void *cbarg)
+{
+	INIT_LIST_HEAD(&wqe->sgpg_q);
+	wqe->cbfn = cbfn;
+	wqe->cbarg = cbarg;
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_sgpg_priv.h b/drivers/scsi/bfa/bfa_sgpg_priv.h
new file mode 100644
index 000000000000..9c2a8cbe7522
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_sgpg_priv.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  hal_sgpg.h BFA SG page module
+ */
+
+#ifndef __BFA_SGPG_PRIV_H__
+#define __BFA_SGPG_PRIV_H__
+
+#include <cs/bfa_q.h>
+
+#define BFA_SGPG_MIN	(16)
+
+/**
+ * Alignment macro for SG page allocation
+ */
+#define BFA_SGPG_ROUNDUP(_l) (((_l) + (sizeof(struct bfi_sgpg_s) - 1)) \
+			& ~(sizeof(struct bfi_sgpg_s) - 1))
+
+struct bfa_sgpg_wqe_s {
+	struct list_head qe;	/*  queue sg page element	*/
+	int	nsgpg;		/*  pages to be allocated	*/
+	int	nsgpg_total;	/*  total pages required	*/
+	void	(*cbfn) (void *cbarg);
+				/*  callback function		*/
+	void	*cbarg;		/*  callback arg		*/
+	struct list_head sgpg_q;	/*  queue of alloced sgpgs	*/
+};
+
+struct bfa_sgpg_s {
+	struct list_head 	qe;	/*  queue sg page element	*/
+	struct bfi_sgpg_s *sgpg; /*  va of SG page		*/
+	union bfi_addr_u sgpg_pa;/*  pa of SG page		*/
+};
+
+/**
+ * Given number of SG elements, BFA_SGPG_NPAGE() returns the number of
+ * SG pages required.
+ */
+#define BFA_SGPG_NPAGE(_nsges)  (((_nsges) / BFI_SGPG_DATA_SGES) + 1)
+
+struct bfa_sgpg_mod_s {
+	struct bfa_s *bfa;
+	int		num_sgpgs;	/*  number of SG pages		*/
+	int		free_sgpgs;	/*  number of free SG pages	*/
+	struct bfa_sgpg_s *hsgpg_arr;	/*  BFA SG page array	*/
+	struct bfi_sgpg_s *sgpg_arr;	/*  actual SG page array	*/
+	u64	sgpg_arr_pa;	/*  SG page array DMA addr	*/
+	struct list_head sgpg_q;	/*  queue of free SG pages	*/
+	struct list_head sgpg_wait_q; /*  wait queue for SG pages	*/
+};
+#define BFA_SGPG_MOD(__bfa)	(&(__bfa)->modules.sgpg_mod)
+
+bfa_status_t	bfa_sgpg_malloc(struct bfa_s *bfa, struct list_head *sgpg_q,
+								int nsgpgs);
+void		bfa_sgpg_mfree(struct bfa_s *bfa, struct list_head *sgpg_q,
+								int nsgpgs);
+void		bfa_sgpg_winit(struct bfa_sgpg_wqe_s *wqe,
+				   void (*cbfn) (void *cbarg), void *cbarg);
+void		bfa_sgpg_wait(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe,
+								int nsgpgs);
+void		bfa_sgpg_wcancel(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe);
+
+#endif /* __BFA_SGPG_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_sm.c b/drivers/scsi/bfa/bfa_sm.c
new file mode 100644
index 000000000000..5420f4f45e58
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_sm.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfasm.c BFA State machine utility functions
+ */
+
+#include <cs/bfa_sm.h>
+
+/**
+ *  cs_sm_api
+ */
+
+int
+bfa_sm_to_state(struct bfa_sm_table_s *smt, bfa_sm_t sm)
+{
+	int             i = 0;
+
+	while (smt[i].sm && smt[i].sm != sm)
+		i++;
+	return smt[i].state;
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_timer.c b/drivers/scsi/bfa/bfa_timer.c
new file mode 100644
index 000000000000..cb76481f5cb1
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_timer.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa_timer.h>
+#include <cs/bfa_debug.h>
+
+void
+bfa_timer_init(struct bfa_timer_mod_s *mod)
+{
+	INIT_LIST_HEAD(&mod->timer_q);
+}
+
+void
+bfa_timer_beat(struct bfa_timer_mod_s *mod)
+{
+	struct list_head        *qh = &mod->timer_q;
+	struct list_head        *qe, *qe_next;
+	struct bfa_timer_s *elem;
+	struct list_head         timedout_q;
+
+	INIT_LIST_HEAD(&timedout_q);
+
+	qe = bfa_q_next(qh);
+
+	while (qe != qh) {
+		qe_next = bfa_q_next(qe);
+
+		elem = (struct bfa_timer_s *) qe;
+		if (elem->timeout <= BFA_TIMER_FREQ) {
+			elem->timeout = 0;
+			list_del(&elem->qe);
+			list_add_tail(&elem->qe, &timedout_q);
+		} else {
+			elem->timeout -= BFA_TIMER_FREQ;
+		}
+
+		qe = qe_next;	/* go to next elem */
+	}
+
+	/*
+	 * Pop all the timeout entries
+	 */
+	while (!list_empty(&timedout_q)) {
+		bfa_q_deq(&timedout_q, &elem);
+		elem->timercb(elem->arg);
+	}
+}
+
+/**
+ * Should be called with lock protection
+ */
+void
+bfa_timer_begin(struct bfa_timer_mod_s *mod, struct bfa_timer_s *timer,
+		    void (*timercb) (void *), void *arg, unsigned int timeout)
+{
+
+	bfa_assert(timercb != NULL);
+	bfa_assert(!bfa_q_is_on_q(&mod->timer_q, timer));
+
+	timer->timeout = timeout;
+	timer->timercb = timercb;
+	timer->arg = arg;
+
+	list_add_tail(&timer->qe, &mod->timer_q);
+}
+
+/**
+ * Should be called with lock protection
+ */
+void
+bfa_timer_stop(struct bfa_timer_s *timer)
+{
+	bfa_assert(!list_empty(&timer->qe));
+
+	list_del(&timer->qe);
+}
diff --git a/drivers/scsi/bfa/bfa_trcmod_priv.h b/drivers/scsi/bfa/bfa_trcmod_priv.h
new file mode 100644
index 000000000000..b3562dce7e9f
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_trcmod_priv.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  hal_trcmod.h BFA trace modules
+ */
+
+#ifndef __BFA_TRCMOD_PRIV_H__
+#define __BFA_TRCMOD_PRIV_H__
+
+#include <cs/bfa_trc.h>
+
+/*
+ * !!! Only append to the enums defined here to avoid any versioning
+ * !!! needed between trace utility and driver version
+ */
+enum {
+	BFA_TRC_HAL_IOC		= 1,
+	BFA_TRC_HAL_INTR	= 2,
+	BFA_TRC_HAL_FCXP	= 3,
+	BFA_TRC_HAL_UF		= 4,
+	BFA_TRC_HAL_DIAG	= 5,
+	BFA_TRC_HAL_RPORT	= 6,
+	BFA_TRC_HAL_FCPIM	= 7,
+	BFA_TRC_HAL_IOIM	= 8,
+	BFA_TRC_HAL_TSKIM	= 9,
+	BFA_TRC_HAL_ITNIM	= 10,
+	BFA_TRC_HAL_PPORT	= 11,
+	BFA_TRC_HAL_SGPG	= 12,
+	BFA_TRC_HAL_FLASH	= 13,
+	BFA_TRC_HAL_DEBUG	= 14,
+	BFA_TRC_HAL_WWN		= 15,
+	BFA_TRC_HAL_FLASH_RAW	= 16,
+	BFA_TRC_HAL_SBOOT	= 17,
+	BFA_TRC_HAL_SBOOT_IO	= 18,
+	BFA_TRC_HAL_SBOOT_INTR	= 19,
+	BFA_TRC_HAL_SBTEST	= 20,
+	BFA_TRC_HAL_IPFC	= 21,
+	BFA_TRC_HAL_IOCFC	= 22,
+	BFA_TRC_HAL_FCPTM	= 23,
+	BFA_TRC_HAL_IOTM	= 24,
+	BFA_TRC_HAL_TSKTM	= 25,
+	BFA_TRC_HAL_TIN		= 26,
+	BFA_TRC_HAL_LPS		= 27,
+	BFA_TRC_HAL_FCDIAG	= 28,
+	BFA_TRC_HAL_PBIND	= 29,
+	BFA_TRC_HAL_IOCFC_CT	= 30,
+	BFA_TRC_HAL_IOCFC_CB	= 31,
+	BFA_TRC_HAL_IOCFC_Q	= 32,
+};
+
+#endif /* __BFA_TRCMOD_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_tskim.c b/drivers/scsi/bfa/bfa_tskim.c
new file mode 100644
index 000000000000..010d40d1e5d3
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_tskim.c
@@ -0,0 +1,689 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_cb_ioim_macros.h>
+
+BFA_TRC_FILE(HAL, TSKIM);
+
+/**
+ * task management completion handling
+ */
+#define bfa_tskim_qcomp(__tskim, __cbfn) do {			     \
+	bfa_cb_queue((__tskim)->bfa, &(__tskim)->hcb_qe, __cbfn, (__tskim)); \
+	bfa_tskim_notify_comp(__tskim);      \
+} while (0)
+
+#define bfa_tskim_notify_comp(__tskim) do {				     \
+	if ((__tskim)->notify)					     	     \
+		bfa_itnim_tskdone((__tskim)->itnim);      \
+} while (0)
+
+/*
+ * forward declarations
+ */
+static void     __bfa_cb_tskim_done(void *cbarg, bfa_boolean_t complete);
+static void     __bfa_cb_tskim_failed(void *cbarg, bfa_boolean_t complete);
+static bfa_boolean_t bfa_tskim_match_scope(struct bfa_tskim_s *tskim,
+					       lun_t lun);
+static void     bfa_tskim_gather_ios(struct bfa_tskim_s *tskim);
+static void     bfa_tskim_cleanp_comp(void *tskim_cbarg);
+static void     bfa_tskim_cleanup_ios(struct bfa_tskim_s *tskim);
+static bfa_boolean_t bfa_tskim_send(struct bfa_tskim_s *tskim);
+static bfa_boolean_t bfa_tskim_send_abort(struct bfa_tskim_s *tskim);
+static void     bfa_tskim_iocdisable_ios(struct bfa_tskim_s *tskim);
+
+/**
+ *  bfa_tskim_sm
+ */
+
+enum bfa_tskim_event {
+	BFA_TSKIM_SM_START        = 1,  /*  TM command start            */
+	BFA_TSKIM_SM_DONE         = 2,  /*  TM completion               */
+	BFA_TSKIM_SM_QRESUME      = 3,  /*  resume after qfull          */
+	BFA_TSKIM_SM_HWFAIL       = 5,  /*  IOC h/w failure event       */
+	BFA_TSKIM_SM_HCB          = 6,  /*  BFA callback completion     */
+	BFA_TSKIM_SM_IOS_DONE     = 7,  /*  IO and sub TM completions   */
+	BFA_TSKIM_SM_CLEANUP      = 8,  /*  TM cleanup on ITN offline   */
+	BFA_TSKIM_SM_CLEANUP_DONE = 9,  /*  TM abort completion         */
+};
+
+static void     bfa_tskim_sm_uninit(struct bfa_tskim_s *tskim,
+					enum bfa_tskim_event event);
+static void     bfa_tskim_sm_active(struct bfa_tskim_s *tskim,
+					enum bfa_tskim_event event);
+static void     bfa_tskim_sm_cleanup(struct bfa_tskim_s *tskim,
+					 enum bfa_tskim_event event);
+static void     bfa_tskim_sm_iocleanup(struct bfa_tskim_s *tskim,
+					 enum bfa_tskim_event event);
+static void     bfa_tskim_sm_qfull(struct bfa_tskim_s *tskim,
+				       enum bfa_tskim_event event);
+static void     bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
+				       enum bfa_tskim_event event);
+static void     bfa_tskim_sm_hcb(struct bfa_tskim_s *tskim,
+				     enum bfa_tskim_event event);
+
+/**
+ *      Task management command beginning state.
+ */
+static void
+bfa_tskim_sm_uninit(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+	bfa_trc(tskim->bfa, event);
+
+	switch (event) {
+	case BFA_TSKIM_SM_START:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_active);
+		bfa_tskim_gather_ios(tskim);
+
+		/**
+		 * If device is offline, do not send TM on wire. Just cleanup
+		 * any pending IO requests and complete TM request.
+		 */
+		if (!bfa_itnim_is_online(tskim->itnim)) {
+			bfa_sm_set_state(tskim, bfa_tskim_sm_iocleanup);
+			tskim->tsk_status = BFI_TSKIM_STS_OK;
+			bfa_tskim_cleanup_ios(tskim);
+			return;
+		}
+
+		if (!bfa_tskim_send(tskim)) {
+			bfa_sm_set_state(tskim, bfa_tskim_sm_qfull);
+			bfa_reqq_wait(tskim->bfa, tskim->itnim->reqq,
+					  &tskim->reqq_wait);
+		}
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * brief
+ *	TM command is active, awaiting completion from firmware to
+ *	cleanup IO requests in TM scope.
+ */
+static void
+bfa_tskim_sm_active(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+	bfa_trc(tskim->bfa, event);
+
+	switch (event) {
+	case BFA_TSKIM_SM_DONE:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_iocleanup);
+		bfa_tskim_cleanup_ios(tskim);
+		break;
+
+	case BFA_TSKIM_SM_CLEANUP:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_cleanup);
+		if (!bfa_tskim_send_abort(tskim)) {
+			bfa_sm_set_state(tskim, bfa_tskim_sm_cleanup_qfull);
+			bfa_reqq_wait(tskim->bfa, tskim->itnim->reqq,
+				&tskim->reqq_wait);
+		}
+		break;
+
+	case BFA_TSKIM_SM_HWFAIL:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+		bfa_tskim_iocdisable_ios(tskim);
+		bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ *	An active TM is being cleaned up since ITN is offline. Awaiting cleanup
+ *	completion event from firmware.
+ */
+static void
+bfa_tskim_sm_cleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+	bfa_trc(tskim->bfa, event);
+
+	switch (event) {
+	case BFA_TSKIM_SM_DONE:
+		/**
+		 * Ignore and wait for ABORT completion from firmware.
+		 */
+		break;
+
+	case BFA_TSKIM_SM_CLEANUP_DONE:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_iocleanup);
+		bfa_tskim_cleanup_ios(tskim);
+		break;
+
+	case BFA_TSKIM_SM_HWFAIL:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+		bfa_tskim_iocdisable_ios(tskim);
+		bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_tskim_sm_iocleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+	bfa_trc(tskim->bfa, event);
+
+	switch (event) {
+	case BFA_TSKIM_SM_IOS_DONE:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+		bfa_tskim_qcomp(tskim, __bfa_cb_tskim_done);
+		break;
+
+	case BFA_TSKIM_SM_CLEANUP:
+		/**
+		 * Ignore, TM command completed on wire.
+		 * Notify TM conmpletion on IO cleanup completion.
+		 */
+		break;
+
+	case BFA_TSKIM_SM_HWFAIL:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+		bfa_tskim_iocdisable_ios(tskim);
+		bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ *      Task management command is waiting for room in request CQ
+ */
+static void
+bfa_tskim_sm_qfull(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+	bfa_trc(tskim->bfa, event);
+
+	switch (event) {
+	case BFA_TSKIM_SM_QRESUME:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_active);
+		bfa_tskim_send(tskim);
+		break;
+
+	case BFA_TSKIM_SM_CLEANUP:
+		/**
+		 * No need to send TM on wire since ITN is offline.
+		 */
+		bfa_sm_set_state(tskim, bfa_tskim_sm_iocleanup);
+		bfa_reqq_wcancel(&tskim->reqq_wait);
+		bfa_tskim_cleanup_ios(tskim);
+		break;
+
+	case BFA_TSKIM_SM_HWFAIL:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+		bfa_reqq_wcancel(&tskim->reqq_wait);
+		bfa_tskim_iocdisable_ios(tskim);
+		bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ *      Task management command is active, awaiting for room in request CQ
+ *	to send clean up request.
+ */
+static void
+bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
+		enum bfa_tskim_event event)
+{
+	bfa_trc(tskim->bfa, event);
+
+	switch (event) {
+	case BFA_TSKIM_SM_DONE:
+		bfa_reqq_wcancel(&tskim->reqq_wait);
+		/**
+		 *
+		 * Fall through !!!
+		 */
+
+	case BFA_TSKIM_SM_QRESUME:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_cleanup);
+		bfa_tskim_send_abort(tskim);
+		break;
+
+	case BFA_TSKIM_SM_HWFAIL:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+		bfa_reqq_wcancel(&tskim->reqq_wait);
+		bfa_tskim_iocdisable_ios(tskim);
+		bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ *      BFA callback is pending
+ */
+static void
+bfa_tskim_sm_hcb(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+	bfa_trc(tskim->bfa, event);
+
+	switch (event) {
+	case BFA_TSKIM_SM_HCB:
+		bfa_sm_set_state(tskim, bfa_tskim_sm_uninit);
+		bfa_tskim_free(tskim);
+		break;
+
+	case BFA_TSKIM_SM_CLEANUP:
+		bfa_tskim_notify_comp(tskim);
+		break;
+
+	case BFA_TSKIM_SM_HWFAIL:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  bfa_tskim_private
+ */
+
+static void
+__bfa_cb_tskim_done(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_tskim_s *tskim = cbarg;
+
+	if (!complete) {
+		bfa_sm_send_event(tskim, BFA_TSKIM_SM_HCB);
+		return;
+	}
+
+	bfa_stats(tskim->itnim, tm_success);
+	bfa_cb_tskim_done(tskim->bfa->bfad, tskim->dtsk, tskim->tsk_status);
+}
+
+static void
+__bfa_cb_tskim_failed(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_tskim_s *tskim = cbarg;
+
+	if (!complete) {
+		bfa_sm_send_event(tskim, BFA_TSKIM_SM_HCB);
+		return;
+	}
+
+	bfa_stats(tskim->itnim, tm_failures);
+	bfa_cb_tskim_done(tskim->bfa->bfad, tskim->dtsk,
+			   BFI_TSKIM_STS_FAILED);
+}
+
+static          bfa_boolean_t
+bfa_tskim_match_scope(struct bfa_tskim_s *tskim, lun_t lun)
+{
+	switch (tskim->tm_cmnd) {
+	case FCP_TM_TARGET_RESET:
+		return BFA_TRUE;
+
+	case FCP_TM_ABORT_TASK_SET:
+	case FCP_TM_CLEAR_TASK_SET:
+	case FCP_TM_LUN_RESET:
+	case FCP_TM_CLEAR_ACA:
+		return (tskim->lun == lun);
+
+	default:
+		bfa_assert(0);
+	}
+
+	return BFA_FALSE;
+}
+
+/**
+ *      Gather affected IO requests and task management commands.
+ */
+static void
+bfa_tskim_gather_ios(struct bfa_tskim_s *tskim)
+{
+	struct bfa_itnim_s *itnim = tskim->itnim;
+	struct bfa_ioim_s *ioim;
+	struct list_head        *qe, *qen;
+
+	INIT_LIST_HEAD(&tskim->io_q);
+
+	/**
+	 * Gather any active IO requests first.
+	 */
+	list_for_each_safe(qe, qen, &itnim->io_q) {
+		ioim = (struct bfa_ioim_s *) qe;
+		if (bfa_tskim_match_scope
+		    (tskim, bfa_cb_ioim_get_lun(ioim->dio))) {
+			list_del(&ioim->qe);
+			list_add_tail(&ioim->qe, &tskim->io_q);
+		}
+	}
+
+	/**
+	 * Failback any pending IO requests immediately.
+	 */
+	list_for_each_safe(qe, qen, &itnim->pending_q) {
+		ioim = (struct bfa_ioim_s *) qe;
+		if (bfa_tskim_match_scope
+		    (tskim, bfa_cb_ioim_get_lun(ioim->dio))) {
+			list_del(&ioim->qe);
+			list_add_tail(&ioim->qe, &ioim->fcpim->ioim_comp_q);
+			bfa_ioim_tov(ioim);
+		}
+	}
+}
+
+/**
+ * 		IO cleanup completion
+ */
+static void
+bfa_tskim_cleanp_comp(void *tskim_cbarg)
+{
+	struct bfa_tskim_s *tskim = tskim_cbarg;
+
+	bfa_stats(tskim->itnim, tm_io_comps);
+	bfa_sm_send_event(tskim, BFA_TSKIM_SM_IOS_DONE);
+}
+
+/**
+ *      Gather affected IO requests and task management commands.
+ */
+static void
+bfa_tskim_cleanup_ios(struct bfa_tskim_s *tskim)
+{
+	struct bfa_ioim_s *ioim;
+	struct list_head        *qe, *qen;
+
+	bfa_wc_init(&tskim->wc, bfa_tskim_cleanp_comp, tskim);
+
+	list_for_each_safe(qe, qen, &tskim->io_q) {
+		ioim = (struct bfa_ioim_s *) qe;
+		bfa_wc_up(&tskim->wc);
+		bfa_ioim_cleanup_tm(ioim, tskim);
+	}
+
+	bfa_wc_wait(&tskim->wc);
+}
+
+/**
+ *      Send task management request to firmware.
+ */
+static bfa_boolean_t
+bfa_tskim_send(struct bfa_tskim_s *tskim)
+{
+	struct bfa_itnim_s *itnim = tskim->itnim;
+	struct bfi_tskim_req_s *m;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(tskim->bfa, itnim->reqq);
+	if (!m)
+		return BFA_FALSE;
+
+	/**
+	 * build i/o request message next
+	 */
+	bfi_h2i_set(m->mh, BFI_MC_TSKIM, BFI_TSKIM_H2I_TM_REQ,
+			bfa_lpuid(tskim->bfa));
+
+	m->tsk_tag = bfa_os_htons(tskim->tsk_tag);
+	m->itn_fhdl = tskim->itnim->rport->fw_handle;
+	m->t_secs = tskim->tsecs;
+	m->lun = tskim->lun;
+	m->tm_flags = tskim->tm_cmnd;
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(tskim->bfa, itnim->reqq);
+	return BFA_TRUE;
+}
+
+/**
+ *      Send abort request to cleanup an active TM to firmware.
+ */
+static bfa_boolean_t
+bfa_tskim_send_abort(struct bfa_tskim_s *tskim)
+{
+	struct bfa_itnim_s             *itnim = tskim->itnim;
+	struct bfi_tskim_abortreq_s    *m;
+
+	/**
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(tskim->bfa, itnim->reqq);
+	if (!m)
+		return BFA_FALSE;
+
+	/**
+	 * build i/o request message next
+	 */
+	bfi_h2i_set(m->mh, BFI_MC_TSKIM, BFI_TSKIM_H2I_ABORT_REQ,
+			bfa_lpuid(tskim->bfa));
+
+	m->tsk_tag  = bfa_os_htons(tskim->tsk_tag);
+
+	/**
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(tskim->bfa, itnim->reqq);
+	return BFA_TRUE;
+}
+
+/**
+ *      Call to resume task management cmnd waiting for room in request queue.
+ */
+static void
+bfa_tskim_qresume(void *cbarg)
+{
+	struct bfa_tskim_s *tskim = cbarg;
+
+	bfa_fcpim_stats(tskim->fcpim, qresumes);
+	bfa_stats(tskim->itnim, tm_qresumes);
+	bfa_sm_send_event(tskim, BFA_TSKIM_SM_QRESUME);
+}
+
+/**
+ * Cleanup IOs associated with a task mangement command on IOC failures.
+ */
+static void
+bfa_tskim_iocdisable_ios(struct bfa_tskim_s *tskim)
+{
+	struct bfa_ioim_s *ioim;
+	struct list_head        *qe, *qen;
+
+	list_for_each_safe(qe, qen, &tskim->io_q) {
+		ioim = (struct bfa_ioim_s *) qe;
+		bfa_ioim_iocdisable(ioim);
+	}
+}
+
+
+
+/**
+ *  bfa_tskim_friend
+ */
+
+/**
+ * Notification on completions from related ioim.
+ */
+void
+bfa_tskim_iodone(struct bfa_tskim_s *tskim)
+{
+	bfa_wc_down(&tskim->wc);
+}
+
+/**
+ * Handle IOC h/w failure notification from itnim.
+ */
+void
+bfa_tskim_iocdisable(struct bfa_tskim_s *tskim)
+{
+	tskim->notify = BFA_FALSE;
+	bfa_stats(tskim->itnim, tm_iocdowns);
+	bfa_sm_send_event(tskim, BFA_TSKIM_SM_HWFAIL);
+}
+
+/**
+ * Cleanup TM command and associated IOs as part of ITNIM offline.
+ */
+void
+bfa_tskim_cleanup(struct bfa_tskim_s *tskim)
+{
+	tskim->notify = BFA_TRUE;
+	bfa_stats(tskim->itnim, tm_cleanups);
+	bfa_sm_send_event(tskim, BFA_TSKIM_SM_CLEANUP);
+}
+
+/**
+ *      Memory allocation and initialization.
+ */
+void
+bfa_tskim_attach(struct bfa_fcpim_mod_s *fcpim, struct bfa_meminfo_s *minfo)
+{
+	struct bfa_tskim_s *tskim;
+	u16        i;
+
+	INIT_LIST_HEAD(&fcpim->tskim_free_q);
+
+	tskim = (struct bfa_tskim_s *) bfa_meminfo_kva(minfo);
+	fcpim->tskim_arr = tskim;
+
+	for (i = 0; i < fcpim->num_tskim_reqs; i++, tskim++) {
+		/*
+		 * initialize TSKIM
+		 */
+		bfa_os_memset(tskim, 0, sizeof(struct bfa_tskim_s));
+		tskim->tsk_tag = i;
+		tskim->bfa     = fcpim->bfa;
+		tskim->fcpim   = fcpim;
+		tskim->notify  = BFA_FALSE;
+		bfa_reqq_winit(&tskim->reqq_wait, bfa_tskim_qresume,
+				   tskim);
+		bfa_sm_set_state(tskim, bfa_tskim_sm_uninit);
+
+		list_add_tail(&tskim->qe, &fcpim->tskim_free_q);
+	}
+
+	bfa_meminfo_kva(minfo) = (u8 *) tskim;
+}
+
+void
+bfa_tskim_detach(struct bfa_fcpim_mod_s *fcpim)
+{
+    /**
+     * @todo
+     */
+}
+
+void
+bfa_tskim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+	struct bfi_tskim_rsp_s *rsp = (struct bfi_tskim_rsp_s *) m;
+	struct bfa_tskim_s *tskim;
+	u16        tsk_tag = bfa_os_ntohs(rsp->tsk_tag);
+
+	tskim = BFA_TSKIM_FROM_TAG(fcpim, tsk_tag);
+	bfa_assert(tskim->tsk_tag == tsk_tag);
+
+	tskim->tsk_status = rsp->tsk_status;
+
+	/**
+	 * Firmware sends BFI_TSKIM_STS_ABORTED status for abort
+	 * requests. All other statuses are for normal completions.
+	 */
+	if (rsp->tsk_status == BFI_TSKIM_STS_ABORTED) {
+		bfa_stats(tskim->itnim, tm_cleanup_comps);
+		bfa_sm_send_event(tskim, BFA_TSKIM_SM_CLEANUP_DONE);
+	} else {
+		bfa_stats(tskim->itnim, tm_fw_rsps);
+		bfa_sm_send_event(tskim, BFA_TSKIM_SM_DONE);
+	}
+}
+
+
+
+/**
+ *  bfa_tskim_api
+ */
+
+
+struct bfa_tskim_s *
+bfa_tskim_alloc(struct bfa_s *bfa, struct bfad_tskim_s *dtsk)
+{
+	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+	struct bfa_tskim_s *tskim;
+
+	bfa_q_deq(&fcpim->tskim_free_q, &tskim);
+
+	if (!tskim)
+		bfa_fcpim_stats(fcpim, no_tskims);
+	else
+		tskim->dtsk = dtsk;
+
+	return tskim;
+}
+
+void
+bfa_tskim_free(struct bfa_tskim_s *tskim)
+{
+	bfa_assert(bfa_q_is_on_q_func(&tskim->itnim->tsk_q, &tskim->qe));
+	list_del(&tskim->qe);
+	list_add_tail(&tskim->qe, &tskim->fcpim->tskim_free_q);
+}
+
+/**
+ *      Start a task management command.
+ *
+ * @param[in]       tskim       BFA task management command instance
+ * @param[in]       itnim       i-t nexus for the task management command
+ * @param[in]       lun         lun, if applicable
+ * @param[in]       tm_cmnd     Task management command code.
+ * @param[in]       t_secs      Timeout in seconds
+ *
+ * @return None.
+ */
+void
+bfa_tskim_start(struct bfa_tskim_s *tskim, struct bfa_itnim_s *itnim, lun_t lun,
+		    enum fcp_tm_cmnd tm_cmnd, u8 tsecs)
+{
+	tskim->itnim   = itnim;
+	tskim->lun     = lun;
+	tskim->tm_cmnd = tm_cmnd;
+	tskim->tsecs   = tsecs;
+	tskim->notify  = BFA_FALSE;
+	bfa_stats(itnim, tm_cmnds);
+
+	list_add_tail(&tskim->qe, &itnim->tsk_q);
+	bfa_sm_send_event(tskim, BFA_TSKIM_SM_START);
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_uf.c b/drivers/scsi/bfa/bfa_uf.c
new file mode 100644
index 000000000000..ff5f9deb1b22
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_uf.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_uf.c BFA unsolicited frame receive implementation
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_uf.h>
+#include <cs/bfa_debug.h>
+
+BFA_TRC_FILE(HAL, UF);
+BFA_MODULE(uf);
+
+/*
+ *****************************************************************************
+ * Internal functions
+ *****************************************************************************
+ */
+static void
+__bfa_cb_uf_recv(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_uf_s   *uf = cbarg;
+	struct bfa_uf_mod_s *ufm = BFA_UF_MOD(uf->bfa);
+
+	if (complete)
+		ufm->ufrecv(ufm->cbarg, uf);
+}
+
+static void
+claim_uf_pbs(struct bfa_uf_mod_s *ufm, struct bfa_meminfo_s *mi)
+{
+	u32        uf_pb_tot_sz;
+
+	ufm->uf_pbs_kva = (struct bfa_uf_buf_s *) bfa_meminfo_dma_virt(mi);
+	ufm->uf_pbs_pa = bfa_meminfo_dma_phys(mi);
+	uf_pb_tot_sz = BFA_ROUNDUP((sizeof(struct bfa_uf_buf_s) * ufm->num_ufs),
+							BFA_DMA_ALIGN_SZ);
+
+	bfa_meminfo_dma_virt(mi) += uf_pb_tot_sz;
+	bfa_meminfo_dma_phys(mi) += uf_pb_tot_sz;
+
+	bfa_os_memset((void *)ufm->uf_pbs_kva, 0, uf_pb_tot_sz);
+}
+
+static void
+claim_uf_post_msgs(struct bfa_uf_mod_s *ufm, struct bfa_meminfo_s *mi)
+{
+	struct bfi_uf_buf_post_s *uf_bp_msg;
+	struct bfi_sge_s      *sge;
+	union bfi_addr_u      sga_zero = { {0} };
+	u16        i;
+	u16        buf_len;
+
+	ufm->uf_buf_posts = (struct bfi_uf_buf_post_s *) bfa_meminfo_kva(mi);
+	uf_bp_msg = ufm->uf_buf_posts;
+
+	for (i = 0, uf_bp_msg = ufm->uf_buf_posts; i < ufm->num_ufs;
+	     i++, uf_bp_msg++) {
+		bfa_os_memset(uf_bp_msg, 0, sizeof(struct bfi_uf_buf_post_s));
+
+		uf_bp_msg->buf_tag = i;
+		buf_len = sizeof(struct bfa_uf_buf_s);
+		uf_bp_msg->buf_len = bfa_os_htons(buf_len);
+		bfi_h2i_set(uf_bp_msg->mh, BFI_MC_UF, BFI_UF_H2I_BUF_POST,
+			    bfa_lpuid(ufm->bfa));
+
+		sge = uf_bp_msg->sge;
+		sge[0].sg_len = buf_len;
+		sge[0].flags = BFI_SGE_DATA_LAST;
+		bfa_dma_addr_set(sge[0].sga, ufm_pbs_pa(ufm, i));
+		bfa_sge_to_be(sge);
+
+		sge[1].sg_len = buf_len;
+		sge[1].flags = BFI_SGE_PGDLEN;
+		sge[1].sga = sga_zero;
+		bfa_sge_to_be(&sge[1]);
+	}
+
+	/**
+	 * advance pointer beyond consumed memory
+	 */
+	bfa_meminfo_kva(mi) = (u8 *) uf_bp_msg;
+}
+
+static void
+claim_ufs(struct bfa_uf_mod_s *ufm, struct bfa_meminfo_s *mi)
+{
+	u16        i;
+	struct bfa_uf_s   *uf;
+
+	/*
+	 * Claim block of memory for UF list
+	 */
+	ufm->uf_list = (struct bfa_uf_s *) bfa_meminfo_kva(mi);
+
+	/*
+	 * Initialize UFs and queue it in UF free queue
+	 */
+	for (i = 0, uf = ufm->uf_list; i < ufm->num_ufs; i++, uf++) {
+		bfa_os_memset(uf, 0, sizeof(struct bfa_uf_s));
+		uf->bfa = ufm->bfa;
+		uf->uf_tag = i;
+		uf->pb_len = sizeof(struct bfa_uf_buf_s);
+		uf->buf_kva = (void *)&ufm->uf_pbs_kva[i];
+		uf->buf_pa = ufm_pbs_pa(ufm, i);
+		list_add_tail(&uf->qe, &ufm->uf_free_q);
+	}
+
+	/**
+	 * advance memory pointer
+	 */
+	bfa_meminfo_kva(mi) = (u8 *) uf;
+}
+
+static void
+uf_mem_claim(struct bfa_uf_mod_s *ufm, struct bfa_meminfo_s *mi)
+{
+	claim_uf_pbs(ufm, mi);
+	claim_ufs(ufm, mi);
+	claim_uf_post_msgs(ufm, mi);
+}
+
+static void
+bfa_uf_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len, u32 *dm_len)
+{
+	u32        num_ufs = cfg->fwcfg.num_uf_bufs;
+
+	/*
+	 * dma-able memory for UF posted bufs
+	 */
+	*dm_len += BFA_ROUNDUP((sizeof(struct bfa_uf_buf_s) * num_ufs),
+							BFA_DMA_ALIGN_SZ);
+
+	/*
+	 * kernel Virtual memory for UFs and UF buf post msg copies
+	 */
+	*ndm_len += sizeof(struct bfa_uf_s) * num_ufs;
+	*ndm_len += sizeof(struct bfi_uf_buf_post_s) * num_ufs;
+}
+
+static void
+bfa_uf_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+		  struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+	struct bfa_uf_mod_s *ufm = BFA_UF_MOD(bfa);
+
+	bfa_os_memset(ufm, 0, sizeof(struct bfa_uf_mod_s));
+	ufm->bfa = bfa;
+	ufm->num_ufs = cfg->fwcfg.num_uf_bufs;
+	INIT_LIST_HEAD(&ufm->uf_free_q);
+	INIT_LIST_HEAD(&ufm->uf_posted_q);
+
+	uf_mem_claim(ufm, meminfo);
+}
+
+static void
+bfa_uf_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_uf_detach(struct bfa_s *bfa)
+{
+}
+
+static struct bfa_uf_s *
+bfa_uf_get(struct bfa_uf_mod_s *uf_mod)
+{
+	struct bfa_uf_s   *uf;
+
+	bfa_q_deq(&uf_mod->uf_free_q, &uf);
+	return (uf);
+}
+
+static void
+bfa_uf_put(struct bfa_uf_mod_s *uf_mod, struct bfa_uf_s *uf)
+{
+	list_add_tail(&uf->qe, &uf_mod->uf_free_q);
+}
+
+static bfa_status_t
+bfa_uf_post(struct bfa_uf_mod_s *ufm, struct bfa_uf_s *uf)
+{
+	struct bfi_uf_buf_post_s *uf_post_msg;
+
+	uf_post_msg = bfa_reqq_next(ufm->bfa, BFA_REQQ_FCXP);
+	if (!uf_post_msg)
+		return BFA_STATUS_FAILED;
+
+	bfa_os_memcpy(uf_post_msg, &ufm->uf_buf_posts[uf->uf_tag],
+		      sizeof(struct bfi_uf_buf_post_s));
+	bfa_reqq_produce(ufm->bfa, BFA_REQQ_FCXP);
+
+	bfa_trc(ufm->bfa, uf->uf_tag);
+
+	list_add_tail(&uf->qe, &ufm->uf_posted_q);
+	return BFA_STATUS_OK;
+}
+
+static void
+bfa_uf_post_all(struct bfa_uf_mod_s *uf_mod)
+{
+	struct bfa_uf_s   *uf;
+
+	while ((uf = bfa_uf_get(uf_mod)) != NULL) {
+		if (bfa_uf_post(uf_mod, uf) != BFA_STATUS_OK)
+			break;
+	}
+}
+
+static void
+uf_recv(struct bfa_s *bfa, struct bfi_uf_frm_rcvd_s *m)
+{
+	struct bfa_uf_mod_s *ufm = BFA_UF_MOD(bfa);
+	u16        uf_tag = m->buf_tag;
+	struct bfa_uf_buf_s *uf_buf = &ufm->uf_pbs_kva[uf_tag];
+	struct bfa_uf_s   *uf = &ufm->uf_list[uf_tag];
+	u8        *buf = &uf_buf->d[0];
+	struct fchs_s         *fchs;
+
+	m->frm_len = bfa_os_ntohs(m->frm_len);
+	m->xfr_len = bfa_os_ntohs(m->xfr_len);
+
+	fchs = (struct fchs_s *) uf_buf;
+
+	list_del(&uf->qe);	/* dequeue from posted queue */
+
+	uf->data_ptr = buf;
+	uf->data_len = m->xfr_len;
+
+	bfa_assert(uf->data_len >= sizeof(struct fchs_s));
+
+	if (uf->data_len == sizeof(struct fchs_s)) {
+		bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_UF, BFA_PL_EID_RX,
+			       uf->data_len, (struct fchs_s *) buf);
+	} else {
+		u32        pld_w0 = *((u32 *) (buf + sizeof(struct fchs_s)));
+		bfa_plog_fchdr_and_pl(bfa->plog, BFA_PL_MID_HAL_UF,
+				      BFA_PL_EID_RX, uf->data_len,
+				      (struct fchs_s *) buf, pld_w0);
+	}
+
+	bfa_cb_queue(bfa, &uf->hcb_qe, __bfa_cb_uf_recv, uf);
+}
+
+static void
+bfa_uf_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_uf_iocdisable(struct bfa_s *bfa)
+{
+	struct bfa_uf_mod_s *ufm = BFA_UF_MOD(bfa);
+	struct bfa_uf_s   *uf;
+	struct list_head        *qe, *qen;
+
+	list_for_each_safe(qe, qen, &ufm->uf_posted_q) {
+		uf = (struct bfa_uf_s *) qe;
+		list_del(&uf->qe);
+		bfa_uf_put(ufm, uf);
+	}
+}
+
+static void
+bfa_uf_start(struct bfa_s *bfa)
+{
+	bfa_uf_post_all(BFA_UF_MOD(bfa));
+}
+
+
+
+/**
+ *  bfa_uf_api
+ */
+
+/**
+ * 		Register handler for all unsolicted recieve frames.
+ *
+ * @param[in]	bfa		BFA instance
+ * @param[in]	ufrecv	receive handler function
+ * @param[in]	cbarg	receive handler arg
+ */
+void
+bfa_uf_recv_register(struct bfa_s *bfa, bfa_cb_uf_recv_t ufrecv, void *cbarg)
+{
+	struct bfa_uf_mod_s *ufm = BFA_UF_MOD(bfa);
+
+	ufm->ufrecv = ufrecv;
+	ufm->cbarg = cbarg;
+}
+
+/**
+ * 		Free an unsolicited frame back to BFA.
+ *
+ * @param[in]		uf		unsolicited frame to be freed
+ *
+ * @return None
+ */
+void
+bfa_uf_free(struct bfa_uf_s *uf)
+{
+	bfa_uf_put(BFA_UF_MOD(uf->bfa), uf);
+	bfa_uf_post_all(BFA_UF_MOD(uf->bfa));
+}
+
+
+
+/**
+ *  uf_pub BFA uf module public functions
+ */
+
+void
+bfa_uf_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
+{
+	bfa_trc(bfa, msg->mhdr.msg_id);
+
+	switch (msg->mhdr.msg_id) {
+	case BFI_UF_I2H_FRM_RCVD:
+		uf_recv(bfa, (struct bfi_uf_frm_rcvd_s *) msg);
+		break;
+
+	default:
+		bfa_trc(bfa, msg->mhdr.msg_id);
+		bfa_assert(0);
+	}
+}
+
+
diff --git a/drivers/scsi/bfa/bfa_uf_priv.h b/drivers/scsi/bfa/bfa_uf_priv.h
new file mode 100644
index 000000000000..bcb490f834f3
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_uf_priv.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_UF_PRIV_H__
+#define __BFA_UF_PRIV_H__
+
+#include <cs/bfa_sm.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_uf.h>
+
+#define BFA_UF_MIN	(4)
+
+struct bfa_uf_mod_s {
+	struct bfa_s *bfa;		/*  back pointer to BFA */
+	struct bfa_uf_s *uf_list;	/*  array of UFs */
+	u16	num_ufs;	/*  num unsolicited rx frames */
+	struct list_head 	uf_free_q;	/*  free UFs */
+	struct list_head 	uf_posted_q;	/*  UFs posted to IOC */
+	struct bfa_uf_buf_s *uf_pbs_kva;	/*  list UF bufs request pld */
+	u64	uf_pbs_pa;	/*  phy addr for UF bufs */
+	struct bfi_uf_buf_post_s *uf_buf_posts;
+					/*  pre-built UF post msgs */
+	bfa_cb_uf_recv_t ufrecv;	/*  uf recv handler function */
+	void		*cbarg;		/*  uf receive handler arg */
+};
+
+#define BFA_UF_MOD(__bfa)	(&(__bfa)->modules.uf_mod)
+
+#define ufm_pbs_pa(_ufmod, _uftag)	\
+	((_ufmod)->uf_pbs_pa + sizeof(struct bfa_uf_buf_s) * (_uftag))
+
+void	bfa_uf_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+
+#endif /* __BFA_UF_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
new file mode 100644
index 000000000000..6f2be5abf561
--- /dev/null
+++ b/drivers/scsi/bfa/bfad.c
@@ -0,0 +1,1182 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfad.c Linux driver PCI interface module.
+ */
+
+#include <linux/module.h>
+#include "bfad_drv.h"
+#include "bfad_im.h"
+#include "bfad_tm.h"
+#include "bfad_ipfc.h"
+#include "bfad_trcmod.h"
+#include <fcb/bfa_fcb_vf.h>
+#include <fcb/bfa_fcb_rport.h>
+#include <fcb/bfa_fcb_port.h>
+#include <fcb/bfa_fcb.h>
+
+BFA_TRC_FILE(LDRV, BFAD);
+static DEFINE_MUTEX(bfad_mutex);
+LIST_HEAD(bfad_list);
+static int      bfad_inst;
+int bfad_supported_fc4s;
+
+static char     *host_name;
+static char     *os_name;
+static char     *os_patch;
+static int      num_rports;
+static int      num_ios;
+static int      num_tms;
+static int      num_fcxps;
+static int      num_ufbufs;
+static int      reqq_size;
+static int      rspq_size;
+static int      num_sgpgs;
+static int      rport_del_timeout = BFA_FCS_RPORT_DEF_DEL_TIMEOUT;
+static int      bfa_io_max_sge = BFAD_IO_MAX_SGE;
+static int      log_level = BFA_LOG_WARNING;
+static int      ioc_auto_recover = BFA_TRUE;
+static int      ipfc_enable = BFA_FALSE;
+static int      ipfc_mtu = -1;
+int 		bfa_lun_queue_depth = BFAD_LUN_QUEUE_DEPTH;
+int      	bfa_linkup_delay = -1;
+
+module_param(os_name, charp, S_IRUGO | S_IWUSR);
+module_param(os_patch, charp, S_IRUGO | S_IWUSR);
+module_param(host_name, charp, S_IRUGO | S_IWUSR);
+module_param(num_rports, int, S_IRUGO | S_IWUSR);
+module_param(num_ios, int, S_IRUGO | S_IWUSR);
+module_param(num_tms, int, S_IRUGO | S_IWUSR);
+module_param(num_fcxps, int, S_IRUGO | S_IWUSR);
+module_param(num_ufbufs, int, S_IRUGO | S_IWUSR);
+module_param(reqq_size, int, S_IRUGO | S_IWUSR);
+module_param(rspq_size, int, S_IRUGO | S_IWUSR);
+module_param(num_sgpgs, int, S_IRUGO | S_IWUSR);
+module_param(rport_del_timeout, int, S_IRUGO | S_IWUSR);
+module_param(bfa_lun_queue_depth, int, S_IRUGO | S_IWUSR);
+module_param(bfa_io_max_sge, int, S_IRUGO | S_IWUSR);
+module_param(log_level, int, S_IRUGO | S_IWUSR);
+module_param(ioc_auto_recover, int, S_IRUGO | S_IWUSR);
+module_param(ipfc_enable, int, S_IRUGO | S_IWUSR);
+module_param(ipfc_mtu, int, S_IRUGO | S_IWUSR);
+module_param(bfa_linkup_delay, int, S_IRUGO | S_IWUSR);
+
+/*
+ * Stores the module parm num_sgpgs value;
+ * used to reset for bfad next instance.
+ */
+static int num_sgpgs_parm;
+
+static bfa_status_t
+bfad_fc4_probe(struct bfad_s *bfad)
+{
+	int             rc;
+
+	rc = bfad_im_probe(bfad);
+	if (rc != BFA_STATUS_OK)
+		goto ext;
+
+	bfad_tm_probe(bfad);
+
+	if (ipfc_enable)
+		bfad_ipfc_probe(bfad);
+ext:
+	return rc;
+}
+
+static void
+bfad_fc4_probe_undo(struct bfad_s *bfad)
+{
+	bfad_im_probe_undo(bfad);
+	bfad_tm_probe_undo(bfad);
+	if (ipfc_enable)
+		bfad_ipfc_probe_undo(bfad);
+}
+
+static void
+bfad_fc4_probe_post(struct bfad_s *bfad)
+{
+	if (bfad->im)
+		bfad_im_probe_post(bfad->im);
+
+	bfad_tm_probe_post(bfad);
+	if (ipfc_enable)
+		bfad_ipfc_probe_post(bfad);
+}
+
+static bfa_status_t
+bfad_fc4_port_new(struct bfad_s *bfad, struct bfad_port_s *port, int roles)
+{
+	int             rc = BFA_STATUS_FAILED;
+
+	if (roles & BFA_PORT_ROLE_FCP_IM)
+		rc = bfad_im_port_new(bfad, port);
+	if (rc != BFA_STATUS_OK)
+		goto ext;
+
+	if (roles & BFA_PORT_ROLE_FCP_TM)
+		rc = bfad_tm_port_new(bfad, port);
+	if (rc != BFA_STATUS_OK)
+		goto ext;
+
+	if ((roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable)
+		rc = bfad_ipfc_port_new(bfad, port, port->pvb_type);
+ext:
+	return rc;
+}
+
+static void
+bfad_fc4_port_delete(struct bfad_s *bfad, struct bfad_port_s *port, int roles)
+{
+	if (roles & BFA_PORT_ROLE_FCP_IM)
+		bfad_im_port_delete(bfad, port);
+
+	if (roles & BFA_PORT_ROLE_FCP_TM)
+		bfad_tm_port_delete(bfad, port);
+
+	if ((roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable)
+		bfad_ipfc_port_delete(bfad, port);
+}
+
+/**
+ *  BFA callbacks
+ */
+void
+bfad_hcb_comp(void *arg, bfa_status_t status)
+{
+	struct bfad_hal_comp *fcomp = (struct bfad_hal_comp *)arg;
+
+	fcomp->status = status;
+	complete(&fcomp->comp);
+}
+
+/**
+ * bfa_init callback
+ */
+void
+bfa_cb_init(void *drv, bfa_status_t init_status)
+{
+	struct bfad_s  *bfad = drv;
+
+	if (init_status == BFA_STATUS_OK)
+		bfad->bfad_flags |= BFAD_HAL_INIT_DONE;
+
+	complete(&bfad->comp);
+}
+
+
+
+/**
+ *  BFA_FCS callbacks
+ */
+static struct bfad_port_s *
+bfad_get_drv_port(struct bfad_s *bfad, struct bfad_vf_s *vf_drv,
+		  struct bfad_vport_s *vp_drv)
+{
+	return ((vp_drv) ? (&(vp_drv)->drv_port)
+		: ((vf_drv) ? (&(vf_drv)->base_port) : (&(bfad)->pport)));
+}
+
+struct bfad_port_s *
+bfa_fcb_port_new(struct bfad_s *bfad, struct bfa_fcs_port_s *port,
+		 enum bfa_port_role roles, struct bfad_vf_s *vf_drv,
+		 struct bfad_vport_s *vp_drv)
+{
+	bfa_status_t    rc;
+	struct bfad_port_s *port_drv;
+
+	if (!vp_drv && !vf_drv) {
+		port_drv = &bfad->pport;
+		port_drv->pvb_type = BFAD_PORT_PHYS_BASE;
+	} else if (!vp_drv && vf_drv) {
+		port_drv = &vf_drv->base_port;
+		port_drv->pvb_type = BFAD_PORT_VF_BASE;
+	} else if (vp_drv && !vf_drv) {
+		port_drv = &vp_drv->drv_port;
+		port_drv->pvb_type = BFAD_PORT_PHYS_VPORT;
+	} else {
+		port_drv = &vp_drv->drv_port;
+		port_drv->pvb_type = BFAD_PORT_VF_VPORT;
+	}
+
+	port_drv->fcs_port = port;
+	port_drv->roles = roles;
+	rc = bfad_fc4_port_new(bfad, port_drv, roles);
+	if (rc != BFA_STATUS_OK) {
+		bfad_fc4_port_delete(bfad, port_drv, roles);
+		port_drv = NULL;
+	}
+
+	return port_drv;
+}
+
+void
+bfa_fcb_port_delete(struct bfad_s *bfad, enum bfa_port_role roles,
+		    struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv)
+{
+	struct bfad_port_s *port_drv;
+
+	/*
+	 * this will be only called from rmmod context
+	 */
+	if (vp_drv && !vp_drv->comp_del) {
+		port_drv = bfad_get_drv_port(bfad, vf_drv, vp_drv);
+		bfa_trc(bfad, roles);
+		bfad_fc4_port_delete(bfad, port_drv, roles);
+	}
+}
+
+void
+bfa_fcb_port_online(struct bfad_s *bfad, enum bfa_port_role roles,
+		    struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv)
+{
+	struct bfad_port_s *port_drv = bfad_get_drv_port(bfad, vf_drv, vp_drv);
+
+	if (roles & BFA_PORT_ROLE_FCP_IM)
+		bfad_im_port_online(bfad, port_drv);
+
+	if (roles & BFA_PORT_ROLE_FCP_TM)
+		bfad_tm_port_online(bfad, port_drv);
+
+	if ((roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable)
+		bfad_ipfc_port_online(bfad, port_drv);
+
+	bfad->bfad_flags |= BFAD_PORT_ONLINE;
+}
+
+void
+bfa_fcb_port_offline(struct bfad_s *bfad, enum bfa_port_role roles,
+		     struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv)
+{
+	struct bfad_port_s *port_drv = bfad_get_drv_port(bfad, vf_drv, vp_drv);
+
+	if (roles & BFA_PORT_ROLE_FCP_IM)
+		bfad_im_port_offline(bfad, port_drv);
+
+	if (roles & BFA_PORT_ROLE_FCP_TM)
+		bfad_tm_port_offline(bfad, port_drv);
+
+	if ((roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable)
+		bfad_ipfc_port_offline(bfad, port_drv);
+}
+
+void
+bfa_fcb_vport_delete(struct bfad_vport_s *vport_drv)
+{
+	if (vport_drv->comp_del) {
+		complete(vport_drv->comp_del);
+		return;
+	}
+
+	kfree(vport_drv);
+}
+
+/**
+ * FCS RPORT alloc callback, after successful PLOGI by FCS
+ */
+bfa_status_t
+bfa_fcb_rport_alloc(struct bfad_s *bfad, struct bfa_fcs_rport_s **rport,
+		    struct bfad_rport_s **rport_drv)
+{
+	bfa_status_t    rc = BFA_STATUS_OK;
+
+	*rport_drv = kzalloc(sizeof(struct bfad_rport_s), GFP_ATOMIC);
+	if (*rport_drv == NULL) {
+		rc = BFA_STATUS_ENOMEM;
+		goto ext;
+	}
+
+	*rport = &(*rport_drv)->fcs_rport;
+
+ext:
+	return rc;
+}
+
+
+
+void
+bfad_hal_mem_release(struct bfad_s *bfad)
+{
+	int             i;
+	struct bfa_meminfo_s *hal_meminfo = &bfad->meminfo;
+	struct bfa_mem_elem_s *meminfo_elem;
+
+	for (i = 0; i < BFA_MEM_TYPE_MAX; i++) {
+		meminfo_elem = &hal_meminfo->meminfo[i];
+		if (meminfo_elem->kva != NULL) {
+			switch (meminfo_elem->mem_type) {
+			case BFA_MEM_TYPE_KVA:
+				vfree(meminfo_elem->kva);
+				break;
+			case BFA_MEM_TYPE_DMA:
+				dma_free_coherent(&bfad->pcidev->dev,
+						meminfo_elem->mem_len,
+						meminfo_elem->kva,
+						(dma_addr_t) meminfo_elem->dma);
+				break;
+			default:
+				bfa_assert(0);
+				break;
+			}
+		}
+	}
+
+	memset(hal_meminfo, 0, sizeof(struct bfa_meminfo_s));
+}
+
+void
+bfad_update_hal_cfg(struct bfa_iocfc_cfg_s *bfa_cfg)
+{
+	if (num_rports > 0)
+		bfa_cfg->fwcfg.num_rports = num_rports;
+	if (num_ios > 0)
+		bfa_cfg->fwcfg.num_ioim_reqs = num_ios;
+	if (num_tms > 0)
+		bfa_cfg->fwcfg.num_tskim_reqs = num_tms;
+	if (num_fcxps > 0)
+		bfa_cfg->fwcfg.num_fcxp_reqs = num_fcxps;
+	if (num_ufbufs > 0)
+		bfa_cfg->fwcfg.num_uf_bufs = num_ufbufs;
+	if (reqq_size > 0)
+		bfa_cfg->drvcfg.num_reqq_elems = reqq_size;
+	if (rspq_size > 0)
+		bfa_cfg->drvcfg.num_rspq_elems = rspq_size;
+	if (num_sgpgs > 0)
+		bfa_cfg->drvcfg.num_sgpgs = num_sgpgs;
+
+	/*
+	 * populate the hal values back to the driver for sysfs use.
+	 * otherwise, the default values will be shown as 0 in sysfs
+	 */
+	num_rports = bfa_cfg->fwcfg.num_rports;
+	num_ios    = bfa_cfg->fwcfg.num_ioim_reqs;
+	num_tms	   = bfa_cfg->fwcfg.num_tskim_reqs;
+	num_fcxps  = bfa_cfg->fwcfg.num_fcxp_reqs;
+	num_ufbufs = bfa_cfg->fwcfg.num_uf_bufs;
+	reqq_size  = bfa_cfg->drvcfg.num_reqq_elems;
+	rspq_size  = bfa_cfg->drvcfg.num_rspq_elems;
+	num_sgpgs  = bfa_cfg->drvcfg.num_sgpgs;
+}
+
+bfa_status_t
+bfad_hal_mem_alloc(struct bfad_s *bfad)
+{
+	struct bfa_meminfo_s *hal_meminfo = &bfad->meminfo;
+	struct bfa_mem_elem_s *meminfo_elem;
+	bfa_status_t    rc = BFA_STATUS_OK;
+	dma_addr_t      phys_addr;
+	int             retry_count = 0;
+	int             reset_value = 1;
+	int             min_num_sgpgs = 512;
+	void           *kva;
+	int             i;
+
+	bfa_cfg_get_default(&bfad->ioc_cfg);
+
+retry:
+	bfad_update_hal_cfg(&bfad->ioc_cfg);
+	bfad->cfg_data.ioc_queue_depth = bfad->ioc_cfg.fwcfg.num_ioim_reqs;
+	bfa_cfg_get_meminfo(&bfad->ioc_cfg, hal_meminfo);
+
+	for (i = 0; i < BFA_MEM_TYPE_MAX; i++) {
+		meminfo_elem = &hal_meminfo->meminfo[i];
+		switch (meminfo_elem->mem_type) {
+		case BFA_MEM_TYPE_KVA:
+			kva = vmalloc(meminfo_elem->mem_len);
+			if (kva == NULL) {
+				bfad_hal_mem_release(bfad);
+				rc = BFA_STATUS_ENOMEM;
+				goto ext;
+			}
+			memset(kva, 0, meminfo_elem->mem_len);
+			meminfo_elem->kva = kva;
+			break;
+		case BFA_MEM_TYPE_DMA:
+			kva = dma_alloc_coherent(&bfad->pcidev->dev,
+					meminfo_elem->mem_len,
+					&phys_addr, GFP_KERNEL);
+			if (kva == NULL) {
+				bfad_hal_mem_release(bfad);
+				/*
+				 * If we cannot allocate with default
+				 * num_sgpages try with half the value.
+				 */
+				if (num_sgpgs > min_num_sgpgs) {
+					printk(KERN_INFO "bfad[%d]: memory"
+						" allocation failed with"
+						" num_sgpgs: %d\n",
+						bfad->inst_no, num_sgpgs);
+					nextLowerInt(&num_sgpgs);
+					printk(KERN_INFO "bfad[%d]: trying to"
+						" allocate memory with"
+						" num_sgpgs: %d\n",
+						bfad->inst_no, num_sgpgs);
+					retry_count++;
+					goto retry;
+				} else {
+					if (num_sgpgs_parm > 0)
+						num_sgpgs = num_sgpgs_parm;
+					else {
+						reset_value =
+							(1 << retry_count);
+						num_sgpgs *= reset_value;
+					}
+					rc = BFA_STATUS_ENOMEM;
+					goto ext;
+				}
+			}
+
+			if (num_sgpgs_parm > 0)
+				num_sgpgs = num_sgpgs_parm;
+			else {
+				reset_value = (1 << retry_count);
+				num_sgpgs *= reset_value;
+			}
+
+			memset(kva, 0, meminfo_elem->mem_len);
+			meminfo_elem->kva = kva;
+			meminfo_elem->dma = phys_addr;
+			break;
+		default:
+			break;
+
+		}
+	}
+ext:
+	return rc;
+}
+
+/**
+ * Create a vport under a vf.
+ */
+bfa_status_t
+bfad_vport_create(struct bfad_s *bfad, u16 vf_id,
+		  struct bfa_port_cfg_s *port_cfg)
+{
+	struct bfad_vport_s *vport;
+	int             rc = BFA_STATUS_OK;
+	unsigned long   flags;
+	struct completion fcomp;
+
+	vport = kzalloc(sizeof(struct bfad_vport_s), GFP_KERNEL);
+	if (!vport) {
+		rc = BFA_STATUS_ENOMEM;
+		goto ext;
+	}
+
+	vport->drv_port.bfad = bfad;
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	rc = bfa_fcs_vport_create(&vport->fcs_vport, &bfad->bfa_fcs, vf_id,
+				  port_cfg, vport);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	if (rc != BFA_STATUS_OK)
+		goto ext_free_vport;
+
+	if (port_cfg->roles & BFA_PORT_ROLE_FCP_IM) {
+		rc = bfad_im_scsi_host_alloc(bfad, vport->drv_port.im_port);
+		if (rc != BFA_STATUS_OK)
+			goto ext_free_fcs_vport;
+	}
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	bfa_fcs_vport_start(&vport->fcs_vport);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	return BFA_STATUS_OK;
+
+ext_free_fcs_vport:
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	vport->comp_del = &fcomp;
+	init_completion(vport->comp_del);
+	bfa_fcs_vport_delete(&vport->fcs_vport);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	wait_for_completion(vport->comp_del);
+ext_free_vport:
+	kfree(vport);
+ext:
+	return rc;
+}
+
+/**
+ * Create a vf and its base vport implicitely.
+ */
+bfa_status_t
+bfad_vf_create(struct bfad_s *bfad, u16 vf_id,
+	       struct bfa_port_cfg_s *port_cfg)
+{
+	struct bfad_vf_s *vf;
+	int             rc = BFA_STATUS_OK;
+
+	vf = kzalloc(sizeof(struct bfad_vf_s), GFP_KERNEL);
+	if (!vf) {
+		rc = BFA_STATUS_FAILED;
+		goto ext;
+	}
+
+	rc = bfa_fcs_vf_create(&vf->fcs_vf, &bfad->bfa_fcs, vf_id, port_cfg,
+			       vf);
+	if (rc != BFA_STATUS_OK)
+		kfree(vf);
+ext:
+	return rc;
+}
+
+void
+bfad_bfa_tmo(unsigned long data)
+{
+	struct bfad_s  *bfad = (struct bfad_s *)data;
+	unsigned long   flags;
+	struct list_head  doneq;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+	bfa_timer_tick(&bfad->bfa);
+
+	bfa_comp_deq(&bfad->bfa, &doneq);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	if (!list_empty(&doneq)) {
+		bfa_comp_process(&bfad->bfa, &doneq);
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		bfa_comp_free(&bfad->bfa, &doneq);
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	}
+
+	mod_timer(&bfad->hal_tmo, jiffies + msecs_to_jiffies(BFA_TIMER_FREQ));
+}
+
+void
+bfad_init_timer(struct bfad_s *bfad)
+{
+	init_timer(&bfad->hal_tmo);
+	bfad->hal_tmo.function = bfad_bfa_tmo;
+	bfad->hal_tmo.data = (unsigned long)bfad;
+
+	mod_timer(&bfad->hal_tmo, jiffies + msecs_to_jiffies(BFA_TIMER_FREQ));
+}
+
+int
+bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
+{
+	unsigned long   bar0_len;
+	int             rc = -ENODEV;
+
+	if (pci_enable_device(pdev)) {
+		BFA_PRINTF(BFA_ERR, "pci_enable_device fail %p\n", pdev);
+		goto out;
+	}
+
+	if (pci_request_regions(pdev, BFAD_DRIVER_NAME))
+		goto out_disable_device;
+
+	pci_set_master(pdev);
+
+
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
+			BFA_PRINTF(BFA_ERR, "pci_set_dma_mask fail %p\n", pdev);
+			goto out_release_region;
+		}
+
+	bfad->pci_bar0_map = pci_resource_start(pdev, 0);
+	bar0_len = pci_resource_len(pdev, 0);
+	bfad->pci_bar0_kva = ioremap(bfad->pci_bar0_map, bar0_len);
+
+	if (bfad->pci_bar0_kva == NULL) {
+		BFA_PRINTF(BFA_ERR, "Fail to map bar0\n");
+		goto out_release_region;
+	}
+
+	bfad->hal_pcidev.pci_slot = PCI_SLOT(pdev->devfn);
+	bfad->hal_pcidev.pci_func = PCI_FUNC(pdev->devfn);
+	bfad->hal_pcidev.pci_bar_kva = bfad->pci_bar0_kva;
+	bfad->hal_pcidev.device_id = pdev->device;
+	bfad->pci_name = pci_name(pdev);
+
+	bfad->pci_attr.vendor_id = pdev->vendor;
+	bfad->pci_attr.device_id = pdev->device;
+	bfad->pci_attr.ssid = pdev->subsystem_device;
+	bfad->pci_attr.ssvid = pdev->subsystem_vendor;
+	bfad->pci_attr.pcifn = PCI_FUNC(pdev->devfn);
+
+	bfad->pcidev = pdev;
+	return 0;
+
+out_release_region:
+	pci_release_regions(pdev);
+out_disable_device:
+	pci_disable_device(pdev);
+out:
+	return rc;
+}
+
+void
+bfad_pci_uninit(struct pci_dev *pdev, struct bfad_s *bfad)
+{
+#if defined(__ia64__)
+	pci_iounmap(pdev, bfad->pci_bar0_kva);
+#else
+	iounmap(bfad->pci_bar0_kva);
+#endif
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+void
+bfad_fcs_port_cfg(struct bfad_s *bfad)
+{
+	struct bfa_port_cfg_s port_cfg;
+	struct bfa_pport_attr_s attr;
+	char            symname[BFA_SYMNAME_MAXLEN];
+
+	sprintf(symname, "%s-%d", BFAD_DRIVER_NAME, bfad->inst_no);
+	memcpy(port_cfg.sym_name.symname, symname, strlen(symname));
+	bfa_pport_get_attr(&bfad->bfa, &attr);
+	port_cfg.nwwn = attr.nwwn;
+	port_cfg.pwwn = attr.pwwn;
+
+	bfa_fcs_cfg_base_port(&bfad->bfa_fcs, &port_cfg);
+}
+
+bfa_status_t
+bfad_drv_init(struct bfad_s *bfad)
+{
+	bfa_status_t    rc;
+	unsigned long   flags;
+	struct bfa_fcs_driver_info_s driver_info;
+	int             i;
+
+	bfad->cfg_data.rport_del_timeout = rport_del_timeout;
+	bfad->cfg_data.lun_queue_depth = bfa_lun_queue_depth;
+	bfad->cfg_data.io_max_sge = bfa_io_max_sge;
+	bfad->cfg_data.binding_method = FCP_PWWN_BINDING;
+
+	rc = bfad_hal_mem_alloc(bfad);
+	if (rc != BFA_STATUS_OK) {
+		printk(KERN_WARNING "bfad%d bfad_hal_mem_alloc failure\n",
+		       bfad->inst_no);
+		printk(KERN_WARNING
+			"Not enough memory to attach all Brocade HBA ports,"
+			" System may need more memory.\n");
+		goto out_hal_mem_alloc_failure;
+	}
+
+	bfa_init_log(&bfad->bfa, bfad->logmod);
+	bfa_init_trc(&bfad->bfa, bfad->trcmod);
+	bfa_init_aen(&bfad->bfa, bfad->aen);
+	INIT_LIST_HEAD(&bfad->file_q);
+	INIT_LIST_HEAD(&bfad->file_free_q);
+	for (i = 0; i < BFAD_AEN_MAX_APPS; i++) {
+		bfa_q_qe_init(&bfad->file_buf[i].qe);
+		list_add_tail(&bfad->file_buf[i].qe, &bfad->file_free_q);
+	}
+	bfa_init_plog(&bfad->bfa, &bfad->plog_buf);
+	bfa_plog_init(&bfad->plog_buf);
+	bfa_plog_str(&bfad->plog_buf, BFA_PL_MID_DRVR, BFA_PL_EID_DRIVER_START,
+		     0, "Driver Attach");
+
+	bfa_attach(&bfad->bfa, bfad, &bfad->ioc_cfg, &bfad->meminfo,
+		   &bfad->hal_pcidev);
+
+	init_completion(&bfad->comp);
+
+	/*
+	 * Enable Interrupt and wait bfa_init completion
+	 */
+	if (bfad_setup_intr(bfad)) {
+		printk(KERN_WARNING "bfad%d: bfad_setup_intr failed\n",
+		       bfad->inst_no);
+		goto out_setup_intr_failure;
+	}
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	bfa_init(&bfad->bfa);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	/*
+	 * Set up interrupt handler for each vectors
+	 */
+	if ((bfad->bfad_flags & BFAD_MSIX_ON)
+	    && bfad_install_msix_handler(bfad)) {
+		printk(KERN_WARNING "%s: install_msix failed, bfad%d\n",
+		       __FUNCTION__, bfad->inst_no);
+	}
+
+	bfad_init_timer(bfad);
+
+	wait_for_completion(&bfad->comp);
+
+	memset(&driver_info, 0, sizeof(driver_info));
+	strncpy(driver_info.version, BFAD_DRIVER_VERSION,
+		sizeof(driver_info.version) - 1);
+	if (host_name)
+		strncpy(driver_info.host_machine_name, host_name,
+			sizeof(driver_info.host_machine_name) - 1);
+	if (os_name)
+		strncpy(driver_info.host_os_name, os_name,
+			sizeof(driver_info.host_os_name) - 1);
+	if (os_patch)
+		strncpy(driver_info.host_os_patch, os_patch,
+			sizeof(driver_info.host_os_patch) - 1);
+
+	strncpy(driver_info.os_device_name, bfad->pci_name,
+		sizeof(driver_info.os_device_name - 1));
+
+	/*
+	 * FCS INIT
+	 */
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	bfa_fcs_log_init(&bfad->bfa_fcs, bfad->logmod);
+	bfa_fcs_trc_init(&bfad->bfa_fcs, bfad->trcmod);
+	bfa_fcs_aen_init(&bfad->bfa_fcs, bfad->aen);
+	bfa_fcs_init(&bfad->bfa_fcs, &bfad->bfa, bfad, BFA_FALSE);
+	bfa_fcs_driver_info_init(&bfad->bfa_fcs, &driver_info);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	bfad->bfad_flags |= BFAD_DRV_INIT_DONE;
+	return BFA_STATUS_OK;
+
+out_setup_intr_failure:
+	bfa_detach(&bfad->bfa);
+	bfad_hal_mem_release(bfad);
+out_hal_mem_alloc_failure:
+	return BFA_STATUS_FAILED;
+}
+
+void
+bfad_drv_uninit(struct bfad_s *bfad)
+{
+	del_timer_sync(&bfad->hal_tmo);
+	bfa_isr_disable(&bfad->bfa);
+	bfa_detach(&bfad->bfa);
+	bfad_remove_intr(bfad);
+	bfa_assert(list_empty(&bfad->file_q));
+	bfad_hal_mem_release(bfad);
+}
+
+void
+bfad_drv_start(struct bfad_s *bfad)
+{
+	unsigned long   flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	bfa_start(&bfad->bfa);
+	bfa_fcs_start(&bfad->bfa_fcs);
+	bfad->bfad_flags |= BFAD_HAL_START_DONE;
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	bfad_fc4_probe_post(bfad);
+}
+
+void
+bfad_drv_stop(struct bfad_s *bfad)
+{
+	unsigned long   flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	init_completion(&bfad->comp);
+	bfad->pport.flags |= BFAD_PORT_DELETE;
+	bfa_fcs_exit(&bfad->bfa_fcs);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	wait_for_completion(&bfad->comp);
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	init_completion(&bfad->comp);
+	bfa_stop(&bfad->bfa);
+	bfad->bfad_flags &= ~BFAD_HAL_START_DONE;
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	wait_for_completion(&bfad->comp);
+}
+
+bfa_status_t
+bfad_cfg_pport(struct bfad_s *bfad, enum bfa_port_role role)
+{
+	int             rc = BFA_STATUS_OK;
+
+	/*
+	 * Allocate scsi_host for the physical port
+	 */
+	if ((bfad_supported_fc4s & BFA_PORT_ROLE_FCP_IM)
+	    && (role & BFA_PORT_ROLE_FCP_IM)) {
+		if (bfad->pport.im_port == NULL) {
+			rc = BFA_STATUS_FAILED;
+			goto out;
+		}
+
+		rc = bfad_im_scsi_host_alloc(bfad, bfad->pport.im_port);
+		if (rc != BFA_STATUS_OK)
+			goto out;
+
+		bfad->pport.roles |= BFA_PORT_ROLE_FCP_IM;
+	}
+
+	bfad->bfad_flags |= BFAD_CFG_PPORT_DONE;
+
+out:
+	return rc;
+}
+
+void
+bfad_uncfg_pport(struct bfad_s *bfad)
+{
+	if ((bfad->pport.roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable) {
+		bfad_ipfc_port_delete(bfad, &bfad->pport);
+		bfad->pport.roles &= ~BFA_PORT_ROLE_FCP_IPFC;
+	}
+
+	if ((bfad_supported_fc4s & BFA_PORT_ROLE_FCP_IM)
+	    && (bfad->pport.roles & BFA_PORT_ROLE_FCP_IM)) {
+		bfad_im_scsi_host_free(bfad, bfad->pport.im_port);
+		bfad_im_port_clean(bfad->pport.im_port);
+		kfree(bfad->pport.im_port);
+		bfad->pport.roles &= ~BFA_PORT_ROLE_FCP_IM;
+	}
+
+	bfad->bfad_flags &= ~BFAD_CFG_PPORT_DONE;
+}
+
+void
+bfad_drv_log_level_set(struct bfad_s *bfad)
+{
+	if (log_level > BFA_LOG_INVALID && log_level <= BFA_LOG_LEVEL_MAX)
+		bfa_log_set_level_all(&bfad->log_data, log_level);
+}
+
+ /*
+  *  PCI_entry PCI driver entries * {
+  */
+
+/**
+ * PCI probe entry.
+ */
+int
+bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct bfad_s  *bfad;
+	int             error = -ENODEV, retval;
+	char            buf[16];
+
+	/*
+	 * For single port cards - only claim function 0
+	 */
+	if ((pdev->device == BFA_PCI_DEVICE_ID_FC_8G1P)
+	    && (PCI_FUNC(pdev->devfn) != 0))
+		return -ENODEV;
+
+	BFA_TRACE(BFA_INFO, "bfad_pci_probe entry");
+
+	bfad = kzalloc(sizeof(struct bfad_s), GFP_KERNEL);
+	if (!bfad) {
+		error = -ENOMEM;
+		goto out;
+	}
+
+	bfad->trcmod = kzalloc(sizeof(struct bfa_trc_mod_s), GFP_KERNEL);
+	if (!bfad->trcmod) {
+		printk(KERN_WARNING "Error alloc trace buffer!\n");
+		error = -ENOMEM;
+		goto out_alloc_trace_failure;
+	}
+
+	/*
+	 * LOG/TRACE INIT
+	 */
+	bfa_trc_init(bfad->trcmod);
+	bfa_trc(bfad, bfad_inst);
+
+	bfad->logmod = &bfad->log_data;
+	sprintf(buf, "%d", bfad_inst);
+	bfa_log_init(bfad->logmod, buf, bfa_os_printf);
+
+	bfad_drv_log_level_set(bfad);
+
+	bfad->aen = &bfad->aen_buf;
+
+	if (!(bfad_load_fwimg(pdev))) {
+		printk(KERN_WARNING "bfad_load_fwimg failure!\n");
+		kfree(bfad->trcmod);
+		goto out_alloc_trace_failure;
+	}
+
+	retval = bfad_pci_init(pdev, bfad);
+	if (retval) {
+		printk(KERN_WARNING "bfad_pci_init failure!\n");
+		error = retval;
+		goto out_pci_init_failure;
+	}
+
+	mutex_lock(&bfad_mutex);
+	bfad->inst_no = bfad_inst++;
+	list_add_tail(&bfad->list_entry, &bfad_list);
+	mutex_unlock(&bfad_mutex);
+
+	spin_lock_init(&bfad->bfad_lock);
+	pci_set_drvdata(pdev, bfad);
+
+	bfad->ref_count = 0;
+	bfad->pport.bfad = bfad;
+
+	retval = bfad_drv_init(bfad);
+	if (retval != BFA_STATUS_OK)
+		goto out_drv_init_failure;
+	if (!(bfad->bfad_flags & BFAD_HAL_INIT_DONE)) {
+		printk(KERN_WARNING "bfad%d: hal init failed\n", bfad->inst_no);
+		goto ok;
+	}
+
+	/*
+	 * PPORT FCS config
+	 */
+	bfad_fcs_port_cfg(bfad);
+
+	retval = bfad_cfg_pport(bfad, BFA_PORT_ROLE_FCP_IM);
+	if (retval != BFA_STATUS_OK)
+		goto out_cfg_pport_failure;
+
+	/*
+	 * BFAD level FC4 (IM/TM/IPFC) specific resource allocation
+	 */
+	retval = bfad_fc4_probe(bfad);
+	if (retval != BFA_STATUS_OK) {
+		printk(KERN_WARNING "bfad_fc4_probe failed\n");
+		goto out_fc4_probe_failure;
+	}
+
+	bfad_drv_start(bfad);
+
+	/*
+	 * If bfa_linkup_delay is set to -1 default; try to retrive the
+	 * value using the bfad_os_get_linkup_delay(); else use the
+	 * passed in module param value as the bfa_linkup_delay.
+	 */
+	if (bfa_linkup_delay < 0) {
+		bfa_linkup_delay = bfad_os_get_linkup_delay(bfad);
+		bfad_os_rport_online_wait(bfad);
+		bfa_linkup_delay = -1;
+	} else {
+		bfad_os_rport_online_wait(bfad);
+	}
+
+	bfa_log(bfad->logmod, BFA_LOG_LINUX_DEVICE_CLAIMED, bfad->pci_name);
+ok:
+	return 0;
+
+out_fc4_probe_failure:
+	bfad_fc4_probe_undo(bfad);
+	bfad_uncfg_pport(bfad);
+out_cfg_pport_failure:
+	bfad_drv_uninit(bfad);
+out_drv_init_failure:
+	mutex_lock(&bfad_mutex);
+	bfad_inst--;
+	list_del(&bfad->list_entry);
+	mutex_unlock(&bfad_mutex);
+	bfad_pci_uninit(pdev, bfad);
+out_pci_init_failure:
+	kfree(bfad->trcmod);
+out_alloc_trace_failure:
+	kfree(bfad);
+out:
+	return error;
+}
+
+/**
+ * PCI remove entry.
+ */
+void
+bfad_pci_remove(struct pci_dev *pdev)
+{
+	struct bfad_s  *bfad = pci_get_drvdata(pdev);
+	unsigned long   flags;
+
+	bfa_trc(bfad, bfad->inst_no);
+
+	if ((bfad->bfad_flags & BFAD_DRV_INIT_DONE)
+	    && !(bfad->bfad_flags & BFAD_HAL_INIT_DONE)) {
+
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		init_completion(&bfad->comp);
+		bfa_stop(&bfad->bfa);
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		wait_for_completion(&bfad->comp);
+
+		bfad_remove_intr(bfad);
+		del_timer_sync(&bfad->hal_tmo);
+		goto hal_detach;
+	} else if (!(bfad->bfad_flags & BFAD_DRV_INIT_DONE)) {
+		goto remove_sysfs;
+	}
+
+	if (bfad->bfad_flags & BFAD_HAL_START_DONE)
+		bfad_drv_stop(bfad);
+
+	bfad_remove_intr(bfad);
+
+	del_timer_sync(&bfad->hal_tmo);
+	bfad_fc4_probe_undo(bfad);
+
+	if (bfad->bfad_flags & BFAD_CFG_PPORT_DONE)
+		bfad_uncfg_pport(bfad);
+
+hal_detach:
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	bfa_detach(&bfad->bfa);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	bfad_hal_mem_release(bfad);
+remove_sysfs:
+
+	mutex_lock(&bfad_mutex);
+	bfad_inst--;
+	list_del(&bfad->list_entry);
+	mutex_unlock(&bfad_mutex);
+	bfad_pci_uninit(pdev, bfad);
+
+	kfree(bfad->trcmod);
+	kfree(bfad);
+}
+
+
+static struct pci_device_id bfad_id_table[] = {
+	{
+	 .vendor = BFA_PCI_VENDOR_ID_BROCADE,
+	 .device = BFA_PCI_DEVICE_ID_FC_8G2P,
+	 .subvendor = PCI_ANY_ID,
+	 .subdevice = PCI_ANY_ID,
+	 },
+	{
+	 .vendor = BFA_PCI_VENDOR_ID_BROCADE,
+	 .device = BFA_PCI_DEVICE_ID_FC_8G1P,
+	 .subvendor = PCI_ANY_ID,
+	 .subdevice = PCI_ANY_ID,
+	 },
+	{
+	 .vendor = BFA_PCI_VENDOR_ID_BROCADE,
+	 .device = BFA_PCI_DEVICE_ID_CT,
+	 .subvendor = PCI_ANY_ID,
+	 .subdevice = PCI_ANY_ID,
+	 .class = (PCI_CLASS_SERIAL_FIBER << 8),
+	 .class_mask = ~0,
+	 },
+
+	{0, 0},
+};
+
+MODULE_DEVICE_TABLE(pci, bfad_id_table);
+
+static struct pci_driver bfad_pci_driver = {
+	.name = BFAD_DRIVER_NAME,
+	.id_table = bfad_id_table,
+	.probe = bfad_pci_probe,
+	.remove = __devexit_p(bfad_pci_remove),
+};
+
+/**
+ *  Linux driver module functions
+ */
+bfa_status_t
+bfad_fc4_module_init(void)
+{
+	int             rc;
+
+	rc = bfad_im_module_init();
+	if (rc != BFA_STATUS_OK)
+		goto ext;
+
+	bfad_tm_module_init();
+	if (ipfc_enable)
+		bfad_ipfc_module_init();
+ext:
+	return rc;
+}
+
+void
+bfad_fc4_module_exit(void)
+{
+	if (ipfc_enable)
+		bfad_ipfc_module_exit();
+	bfad_tm_module_exit();
+	bfad_im_module_exit();
+}
+
+/**
+ * Driver module init.
+ */
+static int      __init
+bfad_init(void)
+{
+	int             error = 0;
+
+	printk(KERN_INFO "Brocade BFA FC/FCOE SCSI driver - version: %s\n",
+	       BFAD_DRIVER_VERSION);
+
+	if (num_sgpgs > 0)
+		num_sgpgs_parm = num_sgpgs;
+
+	error = bfad_fc4_module_init();
+	if (error) {
+		error = -ENOMEM;
+		printk(KERN_WARNING "bfad_fc4_module_init failure\n");
+		goto ext;
+	}
+
+	if (!strcmp(FCPI_NAME, " fcpim"))
+		bfad_supported_fc4s |= BFA_PORT_ROLE_FCP_IM;
+	if (!strcmp(FCPT_NAME, " fcptm"))
+		bfad_supported_fc4s |= BFA_PORT_ROLE_FCP_TM;
+	if (!strcmp(IPFC_NAME, " ipfc"))
+		bfad_supported_fc4s |= BFA_PORT_ROLE_FCP_IPFC;
+
+	bfa_ioc_auto_recover(ioc_auto_recover);
+	bfa_fcs_rport_set_del_timeout(rport_del_timeout);
+	error = pci_register_driver(&bfad_pci_driver);
+
+	if (error) {
+		printk(KERN_WARNING "bfad pci_register_driver failure\n");
+		goto ext;
+	}
+
+	return 0;
+
+ext:
+	bfad_fc4_module_exit();
+	return error;
+}
+
+/**
+ * Driver module exit.
+ */
+static void     __exit
+bfad_exit(void)
+{
+	pci_unregister_driver(&bfad_pci_driver);
+	bfad_fc4_module_exit();
+	bfad_free_fwimg();
+}
+
+#define BFAD_PROTO_NAME FCPI_NAME FCPT_NAME IPFC_NAME
+
+module_init(bfad_init);
+module_exit(bfad_exit);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Brocade Fibre Channel HBA Driver" BFAD_PROTO_NAME);
+MODULE_AUTHOR("Brocade Communications Systems, Inc.");
+MODULE_VERSION(BFAD_DRIVER_VERSION);
+
+
diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c
new file mode 100644
index 000000000000..9129ae3040ff
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_attr.c
@@ -0,0 +1,649 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_attr.c Linux driver configuration interface module.
+ */
+
+#include "bfad_drv.h"
+#include "bfad_im.h"
+#include "bfad_trcmod.h"
+#include "bfad_attr.h"
+
+/**
+ *  FC_transport_template FC transport template
+ */
+
+/**
+ * FC transport template entry, get SCSI target port ID.
+ */
+void
+bfad_im_get_starget_port_id(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost;
+	struct bfad_im_port_s *im_port;
+	struct bfad_s         *bfad;
+	struct bfad_itnim_s   *itnim = NULL;
+	u32        fc_id = -1;
+	unsigned long   flags;
+
+	shost = bfad_os_starget_to_shost(starget);
+	im_port = (struct bfad_im_port_s *) shost->hostdata[0];
+	bfad = im_port->bfad;
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+	itnim = bfad_os_get_itnim(im_port, starget->id);
+	if (itnim)
+		fc_id = bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim);
+
+	fc_starget_port_id(starget) = fc_id;
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * FC transport template entry, get SCSI target nwwn.
+ */
+void
+bfad_im_get_starget_node_name(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost;
+	struct bfad_im_port_s *im_port;
+	struct bfad_s         *bfad;
+	struct bfad_itnim_s   *itnim = NULL;
+	u64             node_name = 0;
+	unsigned long   flags;
+
+	shost = bfad_os_starget_to_shost(starget);
+	im_port = (struct bfad_im_port_s *) shost->hostdata[0];
+	bfad = im_port->bfad;
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+	itnim = bfad_os_get_itnim(im_port, starget->id);
+	if (itnim)
+		node_name = bfa_fcs_itnim_get_nwwn(&itnim->fcs_itnim);
+
+	fc_starget_node_name(starget) = bfa_os_htonll(node_name);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * FC transport template entry, get SCSI target pwwn.
+ */
+void
+bfad_im_get_starget_port_name(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost;
+	struct bfad_im_port_s *im_port;
+	struct bfad_s         *bfad;
+	struct bfad_itnim_s   *itnim = NULL;
+	u64             port_name = 0;
+	unsigned long   flags;
+
+	shost = bfad_os_starget_to_shost(starget);
+	im_port = (struct bfad_im_port_s *) shost->hostdata[0];
+	bfad = im_port->bfad;
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+	itnim = bfad_os_get_itnim(im_port, starget->id);
+	if (itnim)
+		port_name = bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim);
+
+	fc_starget_port_name(starget) = bfa_os_htonll(port_name);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * FC transport template entry, get SCSI host port ID.
+ */
+void
+bfad_im_get_host_port_id(struct Scsi_Host *shost)
+{
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_port_s    *port = im_port->port;
+
+	fc_host_port_id(shost) =
+			bfa_os_hton3b(bfa_fcs_port_get_fcid(port->fcs_port));
+}
+
+
+
+
+
+struct Scsi_Host *
+bfad_os_starget_to_shost(struct scsi_target *starget)
+{
+	return dev_to_shost(starget->dev.parent);
+}
+
+/**
+ * FC transport template entry, get SCSI host port type.
+ */
+static void
+bfad_im_get_host_port_type(struct Scsi_Host *shost)
+{
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_pport_attr_s attr;
+
+	bfa_pport_get_attr(&bfad->bfa, &attr);
+
+	switch (attr.port_type) {
+	case BFA_PPORT_TYPE_NPORT:
+		fc_host_port_type(shost) = FC_PORTTYPE_NPORT;
+		break;
+	case BFA_PPORT_TYPE_NLPORT:
+		fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
+		break;
+	case BFA_PPORT_TYPE_P2P:
+		fc_host_port_type(shost) = FC_PORTTYPE_PTP;
+		break;
+	case BFA_PPORT_TYPE_LPORT:
+		fc_host_port_type(shost) = FC_PORTTYPE_LPORT;
+		break;
+	default:
+		fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
+		break;
+	}
+}
+
+/**
+ * FC transport template entry, get SCSI host port state.
+ */
+static void
+bfad_im_get_host_port_state(struct Scsi_Host *shost)
+{
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_pport_attr_s attr;
+
+	bfa_pport_get_attr(&bfad->bfa, &attr);
+
+	switch (attr.port_state) {
+	case BFA_PPORT_ST_LINKDOWN:
+		fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
+		break;
+	case BFA_PPORT_ST_LINKUP:
+		fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
+		break;
+	case BFA_PPORT_ST_UNINIT:
+	case BFA_PPORT_ST_ENABLING_QWAIT:
+	case BFA_PPORT_ST_ENABLING:
+	case BFA_PPORT_ST_DISABLING_QWAIT:
+	case BFA_PPORT_ST_DISABLING:
+	case BFA_PPORT_ST_DISABLED:
+	case BFA_PPORT_ST_STOPPED:
+	case BFA_PPORT_ST_IOCDOWN:
+	default:
+		fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
+		break;
+	}
+}
+
+/**
+ * FC transport template entry, get SCSI host active fc4s.
+ */
+static void
+bfad_im_get_host_active_fc4s(struct Scsi_Host *shost)
+{
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_port_s    *port = im_port->port;
+
+	memset(fc_host_active_fc4s(shost), 0,
+	       sizeof(fc_host_active_fc4s(shost)));
+
+	if (port->supported_fc4s &
+		(BFA_PORT_ROLE_FCP_IM | BFA_PORT_ROLE_FCP_TM))
+		fc_host_active_fc4s(shost)[2] = 1;
+
+	if (port->supported_fc4s & BFA_PORT_ROLE_FCP_IPFC)
+		fc_host_active_fc4s(shost)[3] = 0x20;
+
+	fc_host_active_fc4s(shost)[7] = 1;
+}
+
+/**
+ * FC transport template entry, get SCSI host link speed.
+ */
+static void
+bfad_im_get_host_speed(struct Scsi_Host *shost)
+{
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_pport_attr_s attr;
+
+	bfa_pport_get_attr(&bfad->bfa, &attr);
+	switch (attr.speed) {
+	case BFA_PPORT_SPEED_8GBPS:
+		fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
+		break;
+	case BFA_PPORT_SPEED_4GBPS:
+		fc_host_speed(shost) = FC_PORTSPEED_4GBIT;
+		break;
+	case BFA_PPORT_SPEED_2GBPS:
+		fc_host_speed(shost) = FC_PORTSPEED_2GBIT;
+		break;
+	case BFA_PPORT_SPEED_1GBPS:
+		fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
+		break;
+	default:
+		fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
+		break;
+	}
+}
+
+/**
+ * FC transport template entry, get SCSI host port type.
+ */
+static void
+bfad_im_get_host_fabric_name(struct Scsi_Host *shost)
+{
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_port_s    *port = im_port->port;
+	wwn_t           fabric_nwwn = 0;
+
+	fabric_nwwn = bfa_fcs_port_get_fabric_name(port->fcs_port);
+
+	fc_host_fabric_name(shost) = bfa_os_htonll(fabric_nwwn);
+
+}
+
+/**
+ * FC transport template entry, get BFAD statistics.
+ */
+static struct fc_host_statistics *
+bfad_im_get_stats(struct Scsi_Host *shost)
+{
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfad_hal_comp fcomp;
+	struct fc_host_statistics *hstats;
+	bfa_status_t    rc;
+	unsigned long   flags;
+
+	hstats = &bfad->link_stats;
+	init_completion(&fcomp.comp);
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	memset(hstats, 0, sizeof(struct fc_host_statistics));
+	rc = bfa_pport_get_stats(&bfad->bfa,
+				     (union bfa_pport_stats_u *) hstats,
+				     bfad_hcb_comp, &fcomp);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	if (rc != BFA_STATUS_OK)
+		return NULL;
+
+	wait_for_completion(&fcomp.comp);
+
+	return hstats;
+}
+
+/**
+ * FC transport template entry, reset BFAD statistics.
+ */
+static void
+bfad_im_reset_stats(struct Scsi_Host *shost)
+{
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfad_hal_comp fcomp;
+	unsigned long   flags;
+	bfa_status_t    rc;
+
+	init_completion(&fcomp.comp);
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	rc = bfa_pport_clear_stats(&bfad->bfa, bfad_hcb_comp, &fcomp);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	if (rc != BFA_STATUS_OK)
+		return;
+
+	wait_for_completion(&fcomp.comp);
+
+	return;
+}
+
+/**
+ * FC transport template entry, get rport loss timeout.
+ */
+static void
+bfad_im_get_rport_loss_tmo(struct fc_rport *rport)
+{
+	struct bfad_itnim_data_s *itnim_data = rport->dd_data;
+	struct bfad_itnim_s   *itnim = itnim_data->itnim;
+	struct bfad_s         *bfad = itnim->im->bfad;
+	unsigned long   flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	rport->dev_loss_tmo = bfa_fcpim_path_tov_get(&bfad->bfa);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * FC transport template entry, set rport loss timeout.
+ */
+static void
+bfad_im_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout)
+{
+	struct bfad_itnim_data_s *itnim_data = rport->dd_data;
+	struct bfad_itnim_s   *itnim = itnim_data->itnim;
+	struct bfad_s         *bfad = itnim->im->bfad;
+	unsigned long   flags;
+
+	if (timeout > 0) {
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		bfa_fcpim_path_tov_set(&bfad->bfa, timeout);
+		rport->dev_loss_tmo = bfa_fcpim_path_tov_get(&bfad->bfa);
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	}
+
+}
+
+struct fc_function_template bfad_im_fc_function_template = {
+
+	/* Target dynamic attributes */
+	.get_starget_port_id = bfad_im_get_starget_port_id,
+	.show_starget_port_id = 1,
+	.get_starget_node_name = bfad_im_get_starget_node_name,
+	.show_starget_node_name = 1,
+	.get_starget_port_name = bfad_im_get_starget_port_name,
+	.show_starget_port_name = 1,
+
+	/* Host dynamic attribute */
+	.get_host_port_id = bfad_im_get_host_port_id,
+	.show_host_port_id = 1,
+
+	/* Host fixed attributes */
+	.show_host_node_name = 1,
+	.show_host_port_name = 1,
+	.show_host_supported_classes = 1,
+	.show_host_supported_fc4s = 1,
+	.show_host_supported_speeds = 1,
+	.show_host_maxframe_size = 1,
+
+	/* More host dynamic attributes */
+	.show_host_port_type = 1,
+	.get_host_port_type = bfad_im_get_host_port_type,
+	.show_host_port_state = 1,
+	.get_host_port_state = bfad_im_get_host_port_state,
+	.show_host_active_fc4s = 1,
+	.get_host_active_fc4s = bfad_im_get_host_active_fc4s,
+	.show_host_speed = 1,
+	.get_host_speed = bfad_im_get_host_speed,
+	.show_host_fabric_name = 1,
+	.get_host_fabric_name = bfad_im_get_host_fabric_name,
+
+	.show_host_symbolic_name = 1,
+
+	/* Statistics */
+	.get_fc_host_stats = bfad_im_get_stats,
+	.reset_fc_host_stats = bfad_im_reset_stats,
+
+	/* Allocation length for host specific data */
+	.dd_fcrport_size = sizeof(struct bfad_itnim_data_s *),
+
+	/* Remote port fixed attributes */
+	.show_rport_maxframe_size = 1,
+	.show_rport_supported_classes = 1,
+	.show_rport_dev_loss_tmo = 1,
+	.get_rport_dev_loss_tmo = bfad_im_get_rport_loss_tmo,
+	.set_rport_dev_loss_tmo = bfad_im_set_rport_loss_tmo,
+};
+
+/**
+ *  Scsi_Host_attrs SCSI host attributes
+ */
+static ssize_t
+bfad_im_serial_num_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_ioc_attr_s  ioc_attr;
+
+	memset(&ioc_attr, 0, sizeof(ioc_attr));
+	bfa_get_attr(&bfad->bfa, &ioc_attr);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			ioc_attr.adapter_attr.serial_num);
+}
+
+static ssize_t
+bfad_im_model_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_ioc_attr_s  ioc_attr;
+
+	memset(&ioc_attr, 0, sizeof(ioc_attr));
+	bfa_get_attr(&bfad->bfa, &ioc_attr);
+	return snprintf(buf, PAGE_SIZE, "%s\n", ioc_attr.adapter_attr.model);
+}
+
+static ssize_t
+bfad_im_model_desc_show(struct device *dev, struct device_attribute *attr,
+				 char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_ioc_attr_s  ioc_attr;
+
+	memset(&ioc_attr, 0, sizeof(ioc_attr));
+	bfa_get_attr(&bfad->bfa, &ioc_attr);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			ioc_attr.adapter_attr.model_descr);
+}
+
+static ssize_t
+bfad_im_node_name_show(struct device *dev, struct device_attribute *attr,
+				 char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_port_s    *port = im_port->port;
+	u64        nwwn;
+
+	nwwn = bfa_fcs_port_get_nwwn(port->fcs_port);
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n", bfa_os_htonll(nwwn));
+}
+
+static ssize_t
+bfad_im_symbolic_name_show(struct device *dev, struct device_attribute *attr,
+				 char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_ioc_attr_s  ioc_attr;
+
+	memset(&ioc_attr, 0, sizeof(ioc_attr));
+	bfa_get_attr(&bfad->bfa, &ioc_attr);
+
+	return snprintf(buf, PAGE_SIZE, "Brocade %s FV%s DV%s\n",
+			ioc_attr.adapter_attr.model,
+			ioc_attr.adapter_attr.fw_ver, BFAD_DRIVER_VERSION);
+}
+
+static ssize_t
+bfad_im_hw_version_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_ioc_attr_s  ioc_attr;
+
+	memset(&ioc_attr, 0, sizeof(ioc_attr));
+	bfa_get_attr(&bfad->bfa, &ioc_attr);
+	return snprintf(buf, PAGE_SIZE, "%s\n", ioc_attr.adapter_attr.hw_ver);
+}
+
+static ssize_t
+bfad_im_drv_version_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", BFAD_DRIVER_VERSION);
+}
+
+static ssize_t
+bfad_im_optionrom_version_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_ioc_attr_s  ioc_attr;
+
+	memset(&ioc_attr, 0, sizeof(ioc_attr));
+	bfa_get_attr(&bfad->bfa, &ioc_attr);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			ioc_attr.adapter_attr.optrom_ver);
+}
+
+static ssize_t
+bfad_im_fw_version_show(struct device *dev, struct device_attribute *attr,
+				 char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_ioc_attr_s  ioc_attr;
+
+	memset(&ioc_attr, 0, sizeof(ioc_attr));
+	bfa_get_attr(&bfad->bfa, &ioc_attr);
+	return snprintf(buf, PAGE_SIZE, "%s\n", ioc_attr.adapter_attr.fw_ver);
+}
+
+static ssize_t
+bfad_im_num_of_ports_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_ioc_attr_s  ioc_attr;
+
+	memset(&ioc_attr, 0, sizeof(ioc_attr));
+	bfa_get_attr(&bfad->bfa, &ioc_attr);
+	return snprintf(buf, PAGE_SIZE, "%d\n", ioc_attr.adapter_attr.nports);
+}
+
+static ssize_t
+bfad_im_drv_name_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", BFAD_DRIVER_NAME);
+}
+
+static ssize_t
+bfad_im_num_of_discovered_ports_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_port_s    *port = im_port->port;
+	struct bfad_s         *bfad = im_port->bfad;
+	int        nrports = 2048;
+	wwn_t          *rports = NULL;
+	unsigned long   flags;
+
+	rports = kzalloc(sizeof(wwn_t) * nrports , GFP_ATOMIC);
+	if (rports == NULL)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	bfa_fcs_port_get_rports(port->fcs_port, rports, &nrports);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	kfree(rports);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", nrports);
+}
+
+static          DEVICE_ATTR(serial_number, S_IRUGO,
+				bfad_im_serial_num_show, NULL);
+static          DEVICE_ATTR(model, S_IRUGO, bfad_im_model_show, NULL);
+static          DEVICE_ATTR(model_description, S_IRUGO,
+				bfad_im_model_desc_show, NULL);
+static          DEVICE_ATTR(node_name, S_IRUGO, bfad_im_node_name_show, NULL);
+static          DEVICE_ATTR(symbolic_name, S_IRUGO,
+				bfad_im_symbolic_name_show, NULL);
+static          DEVICE_ATTR(hardware_version, S_IRUGO,
+				bfad_im_hw_version_show, NULL);
+static          DEVICE_ATTR(driver_version, S_IRUGO,
+				bfad_im_drv_version_show, NULL);
+static          DEVICE_ATTR(option_rom_version, S_IRUGO,
+				bfad_im_optionrom_version_show, NULL);
+static          DEVICE_ATTR(firmware_version, S_IRUGO,
+				bfad_im_fw_version_show, NULL);
+static          DEVICE_ATTR(number_of_ports, S_IRUGO,
+				bfad_im_num_of_ports_show, NULL);
+static          DEVICE_ATTR(driver_name, S_IRUGO, bfad_im_drv_name_show, NULL);
+static          DEVICE_ATTR(number_of_discovered_ports, S_IRUGO,
+				bfad_im_num_of_discovered_ports_show, NULL);
+
+struct device_attribute *bfad_im_host_attrs[] = {
+	&dev_attr_serial_number,
+	&dev_attr_model,
+	&dev_attr_model_description,
+	&dev_attr_node_name,
+	&dev_attr_symbolic_name,
+	&dev_attr_hardware_version,
+	&dev_attr_driver_version,
+	&dev_attr_option_rom_version,
+	&dev_attr_firmware_version,
+	&dev_attr_number_of_ports,
+	&dev_attr_driver_name,
+	&dev_attr_number_of_discovered_ports,
+	NULL,
+};
+
+struct device_attribute *bfad_im_vport_attrs[] = {
+    &dev_attr_serial_number,
+    &dev_attr_model,
+    &dev_attr_model_description,
+    &dev_attr_node_name,
+    &dev_attr_symbolic_name,
+    &dev_attr_hardware_version,
+    &dev_attr_driver_version,
+    &dev_attr_option_rom_version,
+    &dev_attr_firmware_version,
+    &dev_attr_number_of_ports,
+    &dev_attr_driver_name,
+    &dev_attr_number_of_discovered_ports,
+    NULL,
+};
+
+
diff --git a/drivers/scsi/bfa/bfad_attr.h b/drivers/scsi/bfa/bfad_attr.h
new file mode 100644
index 000000000000..4d3312da6a81
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_attr.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFAD_ATTR_H__
+#define __BFAD_ATTR_H__
+/**
+ *  bfad_attr.h VMware driver configuration interface module.
+ */
+
+/**
+ *  FC_transport_template FC transport template
+ */
+
+struct Scsi_Host*
+bfad_os_dev_to_shost(struct scsi_target *starget);
+
+/**
+ * FC transport template entry, get SCSI target port ID.
+ */
+void
+bfad_im_get_starget_port_id(struct scsi_target *starget);
+
+/**
+ * FC transport template entry, get SCSI target nwwn.
+ */
+void
+bfad_im_get_starget_node_name(struct scsi_target *starget);
+
+/**
+ * FC transport template entry, get SCSI target pwwn.
+ */
+void
+bfad_im_get_starget_port_name(struct scsi_target *starget);
+
+/**
+ * FC transport template entry, get SCSI host port ID.
+ */
+void
+bfad_im_get_host_port_id(struct Scsi_Host *shost);
+
+/**
+ * FC transport template entry, issue a LIP.
+ */
+int
+bfad_im_issue_fc_host_lip(struct Scsi_Host *shost);
+
+struct Scsi_Host*
+bfad_os_starget_to_shost(struct scsi_target *starget);
+
+
+#endif /*  __BFAD_ATTR_H__ */
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
new file mode 100644
index 000000000000..172c81e25c1c
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -0,0 +1,295 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * Contains base driver definitions.
+ */
+
+/**
+ *  bfa_drv.h Linux driver data structures.
+ */
+
+#ifndef __BFAD_DRV_H__
+#define __BFAD_DRV_H__
+
+#include "bfa_os_inc.h"
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <fcs/bfa_fcs.h>
+#include <defs/bfa_defs_pci.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_rport.h>
+#include <fcs/bfa_fcs_rport.h>
+#include <defs/bfa_defs_vport.h>
+#include <fcs/bfa_fcs_vport.h>
+
+#include <cs/bfa_plog.h>
+#include "aen/bfa_aen.h"
+#include <log/bfa_log_linux.h>
+
+#define BFAD_DRIVER_NAME        "bfa"
+#ifdef BFA_DRIVER_VERSION
+#define BFAD_DRIVER_VERSION    BFA_DRIVER_VERSION
+#else
+#define BFAD_DRIVER_VERSION    "2.0.0.0"
+#endif
+
+
+#define BFAD_IRQ_FLAGS IRQF_SHARED
+
+/*
+ * BFAD flags
+ */
+#define BFAD_MSIX_ON				0x00000001
+#define BFAD_HAL_INIT_DONE			0x00000002
+#define BFAD_DRV_INIT_DONE			0x00000004
+#define BFAD_CFG_PPORT_DONE			0x00000008
+#define BFAD_HAL_START_DONE			0x00000010
+#define BFAD_PORT_ONLINE			0x00000020
+#define BFAD_RPORT_ONLINE			0x00000040
+
+#define BFAD_PORT_DELETE			0x00000001
+
+/*
+ * BFAD related definition
+ */
+#define SCSI_SCAN_DELAY		HZ
+#define BFAD_STOP_TIMEOUT	30
+#define BFAD_SUSPEND_TIMEOUT	BFAD_STOP_TIMEOUT
+
+/*
+ * BFAD configuration parameter default values
+ */
+#define BFAD_LUN_QUEUE_DEPTH 		32
+#define BFAD_IO_MAX_SGE 		SG_ALL
+
+#define bfad_isr_t irq_handler_t
+
+#define MAX_MSIX_ENTRY 22
+
+struct bfad_msix_s {
+	struct bfad_s *bfad;
+	struct msix_entry msix;
+};
+
+enum bfad_port_pvb_type {
+	BFAD_PORT_PHYS_BASE = 0,
+	BFAD_PORT_PHYS_VPORT = 1,
+	BFAD_PORT_VF_BASE = 2,
+	BFAD_PORT_VF_VPORT = 3,
+};
+
+/*
+ * PORT data structure
+ */
+struct bfad_port_s {
+	struct list_head list_entry;
+	struct bfad_s         *bfad;
+	struct bfa_fcs_port_s *fcs_port;
+	u32        roles;
+	s32         flags;
+	u32        supported_fc4s;
+	u8		ipfc_flags;
+	enum bfad_port_pvb_type pvb_type;
+	struct bfad_im_port_s *im_port;	/* IM specific data */
+	struct bfad_tm_port_s *tm_port;	/* TM specific data */
+	struct bfad_ipfc_port_s *ipfc_port;	/* IPFC specific data */
+};
+
+/*
+ * VPORT data structure
+ */
+struct bfad_vport_s {
+	struct bfad_port_s     drv_port;
+	struct bfa_fcs_vport_s fcs_vport;
+	struct completion *comp_del;
+};
+
+/*
+ * VF data structure
+ */
+struct bfad_vf_s {
+	bfa_fcs_vf_t    fcs_vf;
+	struct bfad_port_s    base_port;	/* base port for vf */
+	struct bfad_s   *bfad;
+};
+
+struct bfad_cfg_param_s {
+	u32        rport_del_timeout;
+	u32        ioc_queue_depth;
+	u32        lun_queue_depth;
+	u32        io_max_sge;
+	u32        binding_method;
+};
+
+#define BFAD_AEN_MAX_APPS 8
+struct bfad_aen_file_s {
+	struct list_head  qe;
+	struct bfad_s *bfad;
+	s32 ri;
+	s32 app_id;
+};
+
+/*
+ * BFAD (PCI function) data structure
+ */
+struct bfad_s {
+	struct list_head list_entry;
+	struct bfa_s       bfa;
+	struct bfa_fcs_s       bfa_fcs;
+	struct pci_dev *pcidev;
+	const char *pci_name;
+	struct bfa_pcidev_s hal_pcidev;
+	struct bfa_ioc_pci_attr_s pci_attr;
+	unsigned long   pci_bar0_map;
+	void __iomem   *pci_bar0_kva;
+	struct completion comp;
+	struct completion suspend;
+	struct completion disable_comp;
+	bfa_boolean_t   disable_active;
+	struct bfad_port_s     pport;	/* physical port of the BFAD */
+	struct bfa_meminfo_s meminfo;
+	struct bfa_iocfc_cfg_s   ioc_cfg;
+	u32        inst_no;	/* BFAD instance number */
+	u32        bfad_flags;
+	spinlock_t      bfad_lock;
+	struct bfad_cfg_param_s cfg_data;
+	struct bfad_msix_s msix_tab[MAX_MSIX_ENTRY];
+	int             nvec;
+	char            adapter_name[BFA_ADAPTER_SYM_NAME_LEN];
+	char            port_name[BFA_ADAPTER_SYM_NAME_LEN];
+	struct timer_list hal_tmo;
+	unsigned long   hs_start;
+	struct bfad_im_s *im;		/* IM specific data */
+	struct bfad_tm_s *tm;		/* TM specific data */
+	struct bfad_ipfc_s *ipfc;	/* IPFC specific data */
+	struct bfa_log_mod_s   log_data;
+	struct bfa_trc_mod_s  *trcmod;
+	struct bfa_log_mod_s  *logmod;
+	struct bfa_aen_s      *aen;
+	struct bfa_aen_s       aen_buf;
+	struct bfad_aen_file_s file_buf[BFAD_AEN_MAX_APPS];
+	struct list_head         file_q;
+	struct list_head         file_free_q;
+	struct bfa_plog_s      plog_buf;
+	int             ref_count;
+	bfa_boolean_t	ipfc_enabled;
+	struct fc_host_statistics link_stats;
+
+	struct kobject *bfa_kobj;
+	struct kobject *ioc_kobj;
+	struct kobject *pport_kobj;
+	struct kobject *lport_kobj;
+};
+
+/*
+ * RPORT data structure
+ */
+struct bfad_rport_s {
+	struct bfa_fcs_rport_s fcs_rport;
+};
+
+struct bfad_buf_info {
+	void           *virt;
+	dma_addr_t      phys;
+	u32        size;
+};
+
+struct bfad_fcxp {
+	struct bfad_port_s    *port;
+	struct bfa_rport_s *bfa_rport;
+	bfa_status_t    req_status;
+	u16        tag;
+	u16        rsp_len;
+	u16        rsp_maxlen;
+	u8         use_ireqbuf;
+	u8         use_irspbuf;
+	u32        num_req_sgles;
+	u32        num_rsp_sgles;
+	struct fchs_s          fchs;
+	void           *reqbuf_info;
+	void           *rspbuf_info;
+	struct bfa_sge_s  *req_sge;
+	struct bfa_sge_s  *rsp_sge;
+	fcxp_send_cb_t  send_cbfn;
+	void           *send_cbarg;
+	void           *bfa_fcxp;
+	struct completion comp;
+};
+
+struct bfad_hal_comp {
+	bfa_status_t    status;
+	struct completion comp;
+};
+
+/*
+ * Macro to obtain the immediate lower power
+ * of two for the integer.
+ */
+#define nextLowerInt(x)                         	\
+do {                                            	\
+	int j;                                  	\
+	(*x)--;    		                	\
+	for (j = 1; j < (sizeof(int) * 8); j <<= 1)     \
+		(*x) = (*x) | (*x) >> j;        	\
+	(*x)++;                  	        	\
+	(*x) = (*x) >> 1;                       	\
+} while (0)
+
+
+bfa_status_t    bfad_vport_create(struct bfad_s *bfad, u16 vf_id,
+				  struct bfa_port_cfg_s *port_cfg);
+bfa_status_t    bfad_vf_create(struct bfad_s *bfad, u16 vf_id,
+			       struct bfa_port_cfg_s *port_cfg);
+bfa_status_t    bfad_cfg_pport(struct bfad_s *bfad, enum bfa_port_role role);
+bfa_status_t    bfad_drv_init(struct bfad_s *bfad);
+void            bfad_drv_start(struct bfad_s *bfad);
+void            bfad_uncfg_pport(struct bfad_s *bfad);
+void            bfad_drv_stop(struct bfad_s *bfad);
+void            bfad_remove_intr(struct bfad_s *bfad);
+void            bfad_hal_mem_release(struct bfad_s *bfad);
+void            bfad_hcb_comp(void *arg, bfa_status_t status);
+
+int             bfad_setup_intr(struct bfad_s *bfad);
+void            bfad_remove_intr(struct bfad_s *bfad);
+
+void		bfad_update_hal_cfg(struct bfa_iocfc_cfg_s *bfa_cfg);
+bfa_status_t	bfad_hal_mem_alloc(struct bfad_s *bfad);
+void		bfad_bfa_tmo(unsigned long data);
+void		bfad_init_timer(struct bfad_s *bfad);
+int		bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad);
+void		bfad_pci_uninit(struct pci_dev *pdev, struct bfad_s *bfad);
+void		bfad_fcs_port_cfg(struct bfad_s *bfad);
+void		bfad_drv_uninit(struct bfad_s *bfad);
+void		bfad_drv_log_level_set(struct bfad_s *bfad);
+bfa_status_t	bfad_fc4_module_init(void);
+void		bfad_fc4_module_exit(void);
+
+void bfad_pci_remove(struct pci_dev *pdev);
+int bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid);
+void bfad_os_rport_online_wait(struct bfad_s *bfad);
+int bfad_os_get_linkup_delay(struct bfad_s *bfad);
+int bfad_install_msix_handler(struct bfad_s *bfad);
+
+extern struct idr bfad_im_port_index;
+extern struct list_head bfad_list;
+extern int bfa_lun_queue_depth;
+extern int bfad_supported_fc4s;
+extern int bfa_linkup_delay;
+
+#endif /* __BFAD_DRV_H__ */
diff --git a/drivers/scsi/bfa/bfad_fwimg.c b/drivers/scsi/bfa/bfad_fwimg.c
new file mode 100644
index 000000000000..b2f6949bc8d3
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_fwimg.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfad_fwimg.c Linux driver PCI interface module.
+ */
+#include <bfa_os_inc.h>
+#include <bfad_drv.h>
+#include <bfad_im_compat.h>
+#include <defs/bfa_defs_version.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <asm/fcntl.h>
+#include <linux/pci.h>
+#include <linux/firmware.h>
+#include <bfa_fwimg_priv.h>
+#include <bfa.h>
+
+u32 bfi_image_ct_size;
+u32 bfi_image_cb_size;
+u32 *bfi_image_ct;
+u32 *bfi_image_cb;
+
+
+#define	BFAD_FW_FILE_CT	"ctfw.bin"
+#define	BFAD_FW_FILE_CB	"cbfw.bin"
+
+u32 *
+bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
+			u32 *bfi_image_size, char *fw_name)
+{
+	const struct firmware *fw;
+
+	if (request_firmware(&fw, fw_name, &pdev->dev)) {
+		printk(KERN_ALERT "Can't locate firmware %s\n", fw_name);
+		goto error;
+	}
+
+	*bfi_image = vmalloc(fw->size);
+	if (NULL == *bfi_image) {
+		printk(KERN_ALERT "Fail to allocate buffer for fw image "
+			"size=%x!\n", (u32) fw->size);
+		goto error;
+	}
+
+	memcpy(*bfi_image, fw->data, fw->size);
+	*bfi_image_size = fw->size/sizeof(u32);
+
+	return(*bfi_image);
+
+error:
+	return(NULL);
+}
+
+u32 *
+bfad_get_firmware_buf(struct pci_dev *pdev)
+{
+	if (pdev->device == BFA_PCI_DEVICE_ID_CT) {
+		if (bfi_image_ct_size == 0)
+			bfad_read_firmware(pdev, &bfi_image_ct,
+				&bfi_image_ct_size, BFAD_FW_FILE_CT);
+		return(bfi_image_ct);
+	} else {
+		if (bfi_image_cb_size == 0)
+			bfad_read_firmware(pdev, &bfi_image_cb,
+				&bfi_image_cb_size, BFAD_FW_FILE_CB);
+		return(bfi_image_cb);
+	}
+}
+
+u32 *
+bfi_image_ct_get_chunk(u32 off)
+{ return (u32 *)(bfi_image_ct + off); }
+
+u32 *
+bfi_image_cb_get_chunk(u32 off)
+{ return (u32 *)(bfi_image_cb + off); }
+
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
new file mode 100644
index 000000000000..158c99243c08
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -0,0 +1,1230 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfad_im.c Linux driver IM module.
+ */
+
+#include "bfad_drv.h"
+#include "bfad_im.h"
+#include "bfad_trcmod.h"
+#include "bfa_cb_ioim_macros.h"
+#include <fcb/bfa_fcb_fcpim.h>
+
+BFA_TRC_FILE(LDRV, IM);
+
+DEFINE_IDR(bfad_im_port_index);
+struct scsi_transport_template *bfad_im_scsi_transport_template;
+static void bfad_im_itnim_work_handler(struct work_struct *work);
+static int bfad_im_queuecommand(struct scsi_cmnd *cmnd,
+		void (*done)(struct scsi_cmnd *));
+static int bfad_im_slave_alloc(struct scsi_device *sdev);
+
+void
+bfa_cb_ioim_done(void *drv, struct bfad_ioim_s *dio,
+			enum bfi_ioim_status io_status, u8 scsi_status,
+			int sns_len, u8 *sns_info, s32 residue)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	struct bfad_s         *bfad = drv;
+	struct bfad_itnim_data_s *itnim_data;
+	struct bfad_itnim_s *itnim;
+
+	switch (io_status) {
+	case BFI_IOIM_STS_OK:
+		bfa_trc(bfad, scsi_status);
+		cmnd->result = ScsiResult(DID_OK, scsi_status);
+		scsi_set_resid(cmnd, 0);
+
+		if (sns_len > 0) {
+			bfa_trc(bfad, sns_len);
+			if (sns_len > SCSI_SENSE_BUFFERSIZE)
+				sns_len = SCSI_SENSE_BUFFERSIZE;
+			memcpy(cmnd->sense_buffer, sns_info, sns_len);
+		}
+		if (residue > 0)
+			scsi_set_resid(cmnd, residue);
+		break;
+
+	case BFI_IOIM_STS_ABORTED:
+	case BFI_IOIM_STS_TIMEDOUT:
+	case BFI_IOIM_STS_PATHTOV:
+	default:
+		cmnd->result = ScsiResult(DID_ERROR, 0);
+	}
+
+	/* Unmap DMA, if host is NULL, it means a scsi passthru cmd */
+	if (cmnd->device->host != NULL)
+		scsi_dma_unmap(cmnd);
+
+	cmnd->host_scribble = NULL;
+	bfa_trc(bfad, cmnd->result);
+
+	itnim_data = cmnd->device->hostdata;
+	if (itnim_data) {
+		itnim = itnim_data->itnim;
+		if (!cmnd->result && itnim &&
+			 (bfa_lun_queue_depth > cmnd->device->queue_depth)) {
+			/* Queue depth adjustment for good status completion */
+			bfad_os_ramp_up_qdepth(itnim, cmnd->device);
+		} else if (cmnd->result == SAM_STAT_TASK_SET_FULL && itnim) {
+			/* qfull handling */
+			bfad_os_handle_qfull(itnim, cmnd->device);
+		}
+	}
+
+	cmnd->scsi_done(cmnd);
+}
+
+void
+bfa_cb_ioim_good_comp(void *drv, struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	struct bfad_itnim_data_s *itnim_data;
+	struct bfad_itnim_s *itnim;
+
+	cmnd->result = ScsiResult(DID_OK, SCSI_STATUS_GOOD);
+
+	/* Unmap DMA, if host is NULL, it means a scsi passthru cmd */
+	if (cmnd->device->host != NULL)
+		scsi_dma_unmap(cmnd);
+
+	cmnd->host_scribble = NULL;
+
+	/* Queue depth adjustment */
+	if (bfa_lun_queue_depth > cmnd->device->queue_depth) {
+		itnim_data = cmnd->device->hostdata;
+		if (itnim_data) {
+			itnim = itnim_data->itnim;
+			if (itnim)
+				bfad_os_ramp_up_qdepth(itnim, cmnd->device);
+		}
+	}
+
+	cmnd->scsi_done(cmnd);
+}
+
+void
+bfa_cb_ioim_abort(void *drv, struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	struct bfad_s         *bfad = drv;
+
+	cmnd->result = ScsiResult(DID_ERROR, 0);
+
+	/* Unmap DMA, if host is NULL, it means a scsi passthru cmd */
+	if (cmnd->device->host != NULL)
+		scsi_dma_unmap(cmnd);
+
+	bfa_trc(bfad, cmnd->result);
+	cmnd->host_scribble = NULL;
+}
+
+void
+bfa_cb_tskim_done(void *bfad, struct bfad_tskim_s *dtsk,
+		   enum bfi_tskim_status tsk_status)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dtsk;
+	wait_queue_head_t *wq;
+
+	cmnd->SCp.Status |= tsk_status << 1;
+	set_bit(IO_DONE_BIT, (unsigned long *)&cmnd->SCp.Status);
+	wq = (wait_queue_head_t *) cmnd->SCp.ptr;
+	cmnd->SCp.ptr = NULL;
+
+	if (wq)
+		wake_up(wq);
+}
+
+void
+bfa_cb_ioim_resfree(void *drv)
+{
+}
+
+/**
+ *  Scsi_Host_template SCSI host template
+ */
+/**
+ * Scsi_Host template entry, returns BFAD PCI info.
+ */
+static const char *
+bfad_im_info(struct Scsi_Host *shost)
+{
+	static char     bfa_buf[256];
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfa_ioc_attr_s  ioc_attr;
+	struct bfad_s         *bfad = im_port->bfad;
+
+	memset(&ioc_attr, 0, sizeof(ioc_attr));
+	bfa_get_attr(&bfad->bfa, &ioc_attr);
+
+	memset(bfa_buf, 0, sizeof(bfa_buf));
+	snprintf(bfa_buf, sizeof(bfa_buf),
+		 "Brocade FC/FCOE Adapter, " "model: %s hwpath: %s driver: %s",
+		 ioc_attr.adapter_attr.model, bfad->pci_name,
+		 BFAD_DRIVER_VERSION);
+	return bfa_buf;
+}
+
+/**
+ * Scsi_Host template entry, aborts the specified SCSI command.
+ *
+ * Returns: SUCCESS or FAILED.
+ */
+static int
+bfad_im_abort_handler(struct scsi_cmnd *cmnd)
+{
+	struct Scsi_Host *shost = cmnd->device->host;
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_ioim_s *hal_io;
+	unsigned long   flags;
+	u32        timeout;
+	int             rc = FAILED;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	hal_io = (struct bfa_ioim_s *) cmnd->host_scribble;
+	if (!hal_io) {
+		/* IO has been completed, retrun success */
+		rc = SUCCESS;
+		goto out;
+	}
+	if (hal_io->dio != (struct bfad_ioim_s *) cmnd) {
+		rc = FAILED;
+		goto out;
+	}
+
+	bfa_trc(bfad, hal_io->iotag);
+	bfa_log(bfad->logmod, BFA_LOG_LINUX_SCSI_ABORT,
+		im_port->shost->host_no, cmnd, hal_io->iotag);
+	bfa_ioim_abort(hal_io);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	/* Need to wait until the command get aborted */
+	timeout = 10;
+	while ((struct bfa_ioim_s *) cmnd->host_scribble == hal_io) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(timeout);
+		if (timeout < 4 * HZ)
+			timeout *= 2;
+	}
+
+	cmnd->scsi_done(cmnd);
+	bfa_trc(bfad, hal_io->iotag);
+	bfa_log(bfad->logmod, BFA_LOG_LINUX_SCSI_ABORT_COMP,
+		im_port->shost->host_no, cmnd, hal_io->iotag);
+	return SUCCESS;
+out:
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	return rc;
+}
+
+static bfa_status_t
+bfad_im_target_reset_send(struct bfad_s *bfad, struct scsi_cmnd *cmnd,
+		     struct bfad_itnim_s *itnim)
+{
+	struct bfa_tskim_s *tskim;
+	struct bfa_itnim_s *bfa_itnim;
+	bfa_status_t    rc = BFA_STATUS_OK;
+
+	bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
+	tskim = bfa_tskim_alloc(&bfad->bfa, (struct bfad_tskim_s *) cmnd);
+	if (!tskim) {
+		BFA_DEV_PRINTF(bfad, BFA_ERR,
+			       "target reset, fail to allocate tskim\n");
+		rc = BFA_STATUS_FAILED;
+		goto out;
+	}
+
+	/*
+	 * Set host_scribble to NULL to avoid aborting a task command if
+	 * happens.
+	 */
+	cmnd->host_scribble = NULL;
+	cmnd->SCp.Status = 0;
+	bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
+	bfa_tskim_start(tskim, bfa_itnim, (lun_t)0,
+			    FCP_TM_TARGET_RESET, BFAD_TARGET_RESET_TMO);
+out:
+	return rc;
+}
+
+/**
+ * Scsi_Host template entry, resets a LUN and abort its all commands.
+ *
+ * Returns: SUCCESS or FAILED.
+ *
+ */
+static int
+bfad_im_reset_lun_handler(struct scsi_cmnd *cmnd)
+{
+	struct Scsi_Host *shost = cmnd->device->host;
+	struct bfad_im_port_s *im_port =
+			(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_itnim_data_s *itnim_data = cmnd->device->hostdata;
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfa_tskim_s *tskim;
+	struct bfad_itnim_s   *itnim;
+	struct bfa_itnim_s *bfa_itnim;
+	DECLARE_WAIT_QUEUE_HEAD(wq);
+	int             rc = SUCCESS;
+	unsigned long   flags;
+	enum bfi_tskim_status task_status;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	itnim = itnim_data->itnim;
+	if (!itnim) {
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		rc = FAILED;
+		goto out;
+	}
+
+	tskim = bfa_tskim_alloc(&bfad->bfa, (struct bfad_tskim_s *) cmnd);
+	if (!tskim) {
+		BFA_DEV_PRINTF(bfad, BFA_ERR,
+				"LUN reset, fail to allocate tskim");
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		rc = FAILED;
+		goto out;
+	}
+
+	/**
+	 * Set host_scribble to NULL to avoid aborting a task command
+	 * if happens.
+	 */
+	cmnd->host_scribble = NULL;
+	cmnd->SCp.ptr = (char *)&wq;
+	cmnd->SCp.Status = 0;
+	bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
+	bfa_tskim_start(tskim, bfa_itnim,
+			    bfad_int_to_lun(cmnd->device->lun),
+			    FCP_TM_LUN_RESET, BFAD_LUN_RESET_TMO);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	wait_event(wq, test_bit(IO_DONE_BIT,
+			(unsigned long *)&cmnd->SCp.Status));
+
+	task_status = cmnd->SCp.Status >> 1;
+	if (task_status != BFI_TSKIM_STS_OK) {
+		BFA_DEV_PRINTF(bfad, BFA_ERR, "LUN reset failure, status: %d\n",
+			       task_status);
+		rc = FAILED;
+	}
+
+out:
+	return rc;
+}
+
+/**
+ * Scsi_Host template entry, resets the bus and abort all commands.
+ */
+static int
+bfad_im_reset_bus_handler(struct scsi_cmnd *cmnd)
+{
+	struct Scsi_Host *shost = cmnd->device->host;
+	struct bfad_im_port_s *im_port =
+				(struct bfad_im_port_s *) shost->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfad_itnim_s   *itnim;
+	unsigned long   flags;
+	u32        i, rc, err_cnt = 0;
+	DECLARE_WAIT_QUEUE_HEAD(wq);
+	enum bfi_tskim_status task_status;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	for (i = 0; i < MAX_FCP_TARGET; i++) {
+		itnim = bfad_os_get_itnim(im_port, i);
+		if (itnim) {
+			cmnd->SCp.ptr = (char *)&wq;
+			rc = bfad_im_target_reset_send(bfad, cmnd, itnim);
+			if (rc != BFA_STATUS_OK) {
+				err_cnt++;
+				continue;
+			}
+
+			/* wait target reset to complete */
+			spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+			wait_event(wq, test_bit(IO_DONE_BIT,
+					(unsigned long *)&cmnd->SCp.Status));
+			spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+			task_status = cmnd->SCp.Status >> 1;
+			if (task_status != BFI_TSKIM_STS_OK) {
+				BFA_DEV_PRINTF(bfad, BFA_ERR,
+					"target reset failure,"
+					" status: %d\n", task_status);
+				err_cnt++;
+			}
+		}
+	}
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	if (err_cnt)
+		return FAILED;
+
+	return SUCCESS;
+}
+
+/**
+ * Scsi_Host template entry slave_destroy.
+ */
+static void
+bfad_im_slave_destroy(struct scsi_device *sdev)
+{
+	sdev->hostdata = NULL;
+	return;
+}
+
+/**
+ *  BFA FCS itnim callbacks
+ */
+
+/**
+ * BFA FCS itnim alloc callback, after successful PRLI
+ * Context: Interrupt
+ */
+void
+bfa_fcb_itnim_alloc(struct bfad_s *bfad, struct bfa_fcs_itnim_s **itnim,
+		    struct bfad_itnim_s **itnim_drv)
+{
+	*itnim_drv = kzalloc(sizeof(struct bfad_itnim_s), GFP_ATOMIC);
+	if (*itnim_drv == NULL)
+		return;
+
+	(*itnim_drv)->im = bfad->im;
+	*itnim = &(*itnim_drv)->fcs_itnim;
+	(*itnim_drv)->state = ITNIM_STATE_NONE;
+
+	/*
+	 * Initiaze the itnim_work
+	 */
+	INIT_WORK(&(*itnim_drv)->itnim_work, bfad_im_itnim_work_handler);
+	bfad->bfad_flags |= BFAD_RPORT_ONLINE;
+}
+
+/**
+ * BFA FCS itnim free callback.
+ * Context: Interrupt. bfad_lock is held
+ */
+void
+bfa_fcb_itnim_free(struct bfad_s *bfad, struct bfad_itnim_s *itnim_drv)
+{
+	struct bfad_port_s    *port;
+	wwn_t wwpn;
+	u32 fcid;
+	char wwpn_str[32], fcid_str[16];
+
+	/* online to free state transtion should not happen */
+	bfa_assert(itnim_drv->state != ITNIM_STATE_ONLINE);
+
+	itnim_drv->queue_work = 1;
+	/* offline request is not yet done, use the same request to free */
+	if (itnim_drv->state == ITNIM_STATE_OFFLINE_PENDING)
+		itnim_drv->queue_work = 0;
+
+	itnim_drv->state = ITNIM_STATE_FREE;
+	port = bfa_fcs_itnim_get_drvport(&itnim_drv->fcs_itnim);
+	itnim_drv->im_port = port->im_port;
+	wwpn = bfa_fcs_itnim_get_pwwn(&itnim_drv->fcs_itnim);
+	fcid = bfa_fcs_itnim_get_fcid(&itnim_drv->fcs_itnim);
+	wwn2str(wwpn_str, wwpn);
+	fcid2str(fcid_str, fcid);
+	bfa_log(bfad->logmod, BFA_LOG_LINUX_ITNIM_FREE,
+		port->im_port->shost->host_no,
+		fcid_str, wwpn_str);
+	bfad_os_itnim_process(itnim_drv);
+}
+
+/**
+ * BFA FCS itnim online callback.
+ * Context: Interrupt. bfad_lock is held
+ */
+void
+bfa_fcb_itnim_online(struct bfad_itnim_s *itnim_drv)
+{
+	struct bfad_port_s    *port;
+
+	itnim_drv->bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim_drv->fcs_itnim);
+	port = bfa_fcs_itnim_get_drvport(&itnim_drv->fcs_itnim);
+	itnim_drv->state = ITNIM_STATE_ONLINE;
+	itnim_drv->queue_work = 1;
+	itnim_drv->im_port = port->im_port;
+	bfad_os_itnim_process(itnim_drv);
+}
+
+/**
+ * BFA FCS itnim offline callback.
+ * Context: Interrupt. bfad_lock is held
+ */
+void
+bfa_fcb_itnim_offline(struct bfad_itnim_s *itnim_drv)
+{
+	struct bfad_port_s    *port;
+	struct bfad_s *bfad;
+
+	port = bfa_fcs_itnim_get_drvport(&itnim_drv->fcs_itnim);
+	bfad = port->bfad;
+	if ((bfad->pport.flags & BFAD_PORT_DELETE) ||
+		 (port->flags & BFAD_PORT_DELETE)) {
+		itnim_drv->state = ITNIM_STATE_OFFLINE;
+		return;
+	}
+	itnim_drv->im_port = port->im_port;
+	itnim_drv->state = ITNIM_STATE_OFFLINE_PENDING;
+	itnim_drv->queue_work = 1;
+	bfad_os_itnim_process(itnim_drv);
+}
+
+/**
+ * BFA FCS itnim timeout callback.
+ * Context: Interrupt. bfad_lock is held
+ */
+void bfa_fcb_itnim_tov(struct bfad_itnim_s *itnim)
+{
+	itnim->state = ITNIM_STATE_TIMEOUT;
+}
+
+/**
+ * Path TOV processing begin notification -- dummy for linux
+ */
+void
+bfa_fcb_itnim_tov_begin(struct bfad_itnim_s *itnim)
+{
+}
+
+
+
+/**
+ * Allocate a Scsi_Host for a port.
+ */
+int
+bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
+{
+	int error = 1;
+
+	if (!idr_pre_get(&bfad_im_port_index, GFP_KERNEL)) {
+		printk(KERN_WARNING "idr_pre_get failure\n");
+		goto out;
+	}
+
+	error = idr_get_new(&bfad_im_port_index, im_port,
+					 &im_port->idr_id);
+	if (error) {
+		printk(KERN_WARNING "idr_get_new failure\n");
+		goto out;
+	}
+
+	im_port->shost = bfad_os_scsi_host_alloc(im_port, bfad);
+	if (!im_port->shost) {
+		error = 1;
+		goto out_free_idr;
+	}
+
+	im_port->shost->hostdata[0] = (unsigned long)im_port;
+	im_port->shost->unique_id = im_port->idr_id;
+	im_port->shost->this_id = -1;
+	im_port->shost->max_id = MAX_FCP_TARGET;
+	im_port->shost->max_lun = MAX_FCP_LUN;
+	im_port->shost->max_cmd_len = 16;
+	im_port->shost->can_queue = bfad->cfg_data.ioc_queue_depth;
+	im_port->shost->transportt = bfad_im_scsi_transport_template;
+
+	error = bfad_os_scsi_add_host(im_port->shost, im_port, bfad);
+	if (error) {
+		printk(KERN_WARNING "bfad_os_scsi_add_host failure %d\n",
+							error);
+		goto out_fc_rel;
+	}
+
+	/* setup host fixed attribute if the lk supports */
+	bfad_os_fc_host_init(im_port);
+
+	return 0;
+
+out_fc_rel:
+	scsi_host_put(im_port->shost);
+out_free_idr:
+	idr_remove(&bfad_im_port_index, im_port->idr_id);
+out:
+	return error;
+}
+
+void
+bfad_im_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
+{
+	unsigned long flags;
+
+	bfa_trc(bfad, bfad->inst_no);
+	bfa_log(bfad->logmod, BFA_LOG_LINUX_SCSI_HOST_FREE,
+			im_port->shost->host_no);
+
+	fc_remove_host(im_port->shost);
+
+	scsi_remove_host(im_port->shost);
+	scsi_host_put(im_port->shost);
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	idr_remove(&bfad_im_port_index, im_port->idr_id);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+static void
+bfad_im_port_delete_handler(struct work_struct *work)
+{
+	struct bfad_im_port_s *im_port =
+		container_of(work, struct bfad_im_port_s, port_delete_work);
+
+	bfad_im_scsi_host_free(im_port->bfad, im_port);
+	bfad_im_port_clean(im_port);
+	kfree(im_port);
+}
+
+bfa_status_t
+bfad_im_port_new(struct bfad_s *bfad, struct bfad_port_s *port)
+{
+	int             rc = BFA_STATUS_OK;
+	struct bfad_im_port_s *im_port;
+
+	im_port = kzalloc(sizeof(struct bfad_im_port_s), GFP_ATOMIC);
+	if (im_port == NULL) {
+		rc = BFA_STATUS_ENOMEM;
+		goto ext;
+	}
+	port->im_port = im_port;
+	im_port->port = port;
+	im_port->bfad = bfad;
+
+	INIT_WORK(&im_port->port_delete_work, bfad_im_port_delete_handler);
+	INIT_LIST_HEAD(&im_port->itnim_mapped_list);
+	INIT_LIST_HEAD(&im_port->binding_list);
+
+ext:
+	return rc;
+}
+
+void
+bfad_im_port_delete(struct bfad_s *bfad, struct bfad_port_s *port)
+{
+	struct bfad_im_port_s *im_port = port->im_port;
+
+	queue_work(bfad->im->drv_workq,
+				&im_port->port_delete_work);
+}
+
+void
+bfad_im_port_clean(struct bfad_im_port_s *im_port)
+{
+	struct bfad_fcp_binding *bp, *bp_new;
+	unsigned long flags;
+	struct bfad_s *bfad =  im_port->bfad;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	list_for_each_entry_safe(bp, bp_new, &im_port->binding_list,
+					list_entry) {
+		list_del(&bp->list_entry);
+		kfree(bp);
+	}
+
+	/* the itnim_mapped_list must be empty at this time */
+	bfa_assert(list_empty(&im_port->itnim_mapped_list));
+
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+void
+bfad_im_port_online(struct bfad_s *bfad, struct bfad_port_s *port)
+{
+}
+
+void
+bfad_im_port_offline(struct bfad_s *bfad, struct bfad_port_s *port)
+{
+}
+
+bfa_status_t
+bfad_im_probe(struct bfad_s *bfad)
+{
+	struct bfad_im_s      *im;
+	bfa_status_t    rc = BFA_STATUS_OK;
+
+	im = kzalloc(sizeof(struct bfad_im_s), GFP_KERNEL);
+	if (im == NULL) {
+		rc = BFA_STATUS_ENOMEM;
+		goto ext;
+	}
+
+	bfad->im = im;
+	im->bfad = bfad;
+
+	if (bfad_os_thread_workq(bfad) != BFA_STATUS_OK) {
+		kfree(im);
+		rc = BFA_STATUS_FAILED;
+	}
+
+ext:
+	return rc;
+}
+
+void
+bfad_im_probe_undo(struct bfad_s *bfad)
+{
+	if (bfad->im) {
+		bfad_os_destroy_workq(bfad->im);
+		kfree(bfad->im);
+		bfad->im = NULL;
+	}
+}
+
+
+
+
+int
+bfad_os_scsi_add_host(struct Scsi_Host *shost, struct bfad_im_port_s *im_port,
+			struct bfad_s *bfad)
+{
+    struct device *dev;
+
+    if (im_port->port->pvb_type == BFAD_PORT_PHYS_BASE)
+		dev = &bfad->pcidev->dev;
+    else
+		dev = &bfad->pport.im_port->shost->shost_gendev;
+
+    return scsi_add_host(shost, dev);
+}
+
+struct Scsi_Host *
+bfad_os_scsi_host_alloc(struct bfad_im_port_s *im_port, struct bfad_s *bfad)
+{
+	struct scsi_host_template *sht;
+
+	if (im_port->port->pvb_type == BFAD_PORT_PHYS_BASE)
+		sht = &bfad_im_scsi_host_template;
+	else
+		sht = &bfad_im_vport_template;
+
+	sht->sg_tablesize = bfad->cfg_data.io_max_sge;
+
+	return scsi_host_alloc(sht, sizeof(unsigned long));
+}
+
+void
+bfad_os_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
+{
+	flush_workqueue(bfad->im->drv_workq);
+	bfad_im_scsi_host_free(im_port->bfad, im_port);
+	bfad_im_port_clean(im_port);
+	kfree(im_port);
+}
+
+void
+bfad_os_destroy_workq(struct bfad_im_s *im)
+{
+	if (im && im->drv_workq) {
+		destroy_workqueue(im->drv_workq);
+		im->drv_workq = NULL;
+	}
+}
+
+bfa_status_t
+bfad_os_thread_workq(struct bfad_s *bfad)
+{
+	struct bfad_im_s      *im = bfad->im;
+
+	bfa_trc(bfad, 0);
+	snprintf(im->drv_workq_name, BFAD_KOBJ_NAME_LEN, "bfad_wq_%d",
+		 bfad->inst_no);
+	im->drv_workq = create_singlethread_workqueue(im->drv_workq_name);
+	if (!im->drv_workq)
+		return BFA_STATUS_FAILED;
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * Scsi_Host template entry.
+ *
+ * Description:
+ * OS entry point to adjust the queue_depths on a per-device basis.
+ * Called once per device during the bus scan.
+ * Return non-zero if fails.
+ */
+static int
+bfad_im_slave_configure(struct scsi_device *sdev)
+{
+	if (sdev->tagged_supported)
+		scsi_activate_tcq(sdev, bfa_lun_queue_depth);
+	else
+		scsi_deactivate_tcq(sdev, bfa_lun_queue_depth);
+
+	return 0;
+}
+
+struct scsi_host_template bfad_im_scsi_host_template = {
+	.module = THIS_MODULE,
+	.name = BFAD_DRIVER_NAME,
+	.info = bfad_im_info,
+	.queuecommand = bfad_im_queuecommand,
+	.eh_abort_handler = bfad_im_abort_handler,
+	.eh_device_reset_handler = bfad_im_reset_lun_handler,
+	.eh_bus_reset_handler = bfad_im_reset_bus_handler,
+
+	.slave_alloc = bfad_im_slave_alloc,
+	.slave_configure = bfad_im_slave_configure,
+	.slave_destroy = bfad_im_slave_destroy,
+
+	.this_id = -1,
+	.sg_tablesize = BFAD_IO_MAX_SGE,
+	.cmd_per_lun = 3,
+	.use_clustering = ENABLE_CLUSTERING,
+	.shost_attrs = bfad_im_host_attrs,
+	.max_sectors = 0xFFFF,
+};
+
+struct scsi_host_template bfad_im_vport_template = {
+	.module = THIS_MODULE,
+	.name = BFAD_DRIVER_NAME,
+	.info = bfad_im_info,
+	.queuecommand = bfad_im_queuecommand,
+	.eh_abort_handler = bfad_im_abort_handler,
+	.eh_device_reset_handler = bfad_im_reset_lun_handler,
+	.eh_bus_reset_handler = bfad_im_reset_bus_handler,
+
+	.slave_alloc = bfad_im_slave_alloc,
+	.slave_configure = bfad_im_slave_configure,
+	.slave_destroy = bfad_im_slave_destroy,
+
+	.this_id = -1,
+	.sg_tablesize = BFAD_IO_MAX_SGE,
+	.cmd_per_lun = 3,
+	.use_clustering = ENABLE_CLUSTERING,
+	.shost_attrs = bfad_im_vport_attrs,
+	.max_sectors = 0xFFFF,
+};
+
+void
+bfad_im_probe_post(struct bfad_im_s *im)
+{
+	flush_workqueue(im->drv_workq);
+}
+
+bfa_status_t
+bfad_im_module_init(void)
+{
+	bfad_im_scsi_transport_template =
+		fc_attach_transport(&bfad_im_fc_function_template);
+	if (!bfad_im_scsi_transport_template)
+		return BFA_STATUS_ENOMEM;
+
+	return BFA_STATUS_OK;
+}
+
+void
+bfad_im_module_exit(void)
+{
+	if (bfad_im_scsi_transport_template)
+		fc_release_transport(bfad_im_scsi_transport_template);
+}
+
+void
+bfad_os_itnim_process(struct bfad_itnim_s *itnim_drv)
+{
+	struct bfad_im_s      *im = itnim_drv->im;
+
+	if (itnim_drv->queue_work)
+		queue_work(im->drv_workq, &itnim_drv->itnim_work);
+}
+
+void
+bfad_os_ramp_up_qdepth(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
+{
+	struct scsi_device *tmp_sdev;
+
+	if (((jiffies - itnim->last_ramp_up_time) >
+		BFA_QUEUE_FULL_RAMP_UP_TIME * HZ) &&
+		((jiffies - itnim->last_queue_full_time) >
+		BFA_QUEUE_FULL_RAMP_UP_TIME * HZ)) {
+		shost_for_each_device(tmp_sdev, sdev->host) {
+			if (bfa_lun_queue_depth > tmp_sdev->queue_depth) {
+				if (tmp_sdev->id != sdev->id)
+					continue;
+				if (tmp_sdev->ordered_tags)
+					scsi_adjust_queue_depth(tmp_sdev,
+						MSG_ORDERED_TAG,
+						tmp_sdev->queue_depth + 1);
+				else
+					scsi_adjust_queue_depth(tmp_sdev,
+						MSG_SIMPLE_TAG,
+						tmp_sdev->queue_depth + 1);
+
+				itnim->last_ramp_up_time = jiffies;
+			}
+		}
+	}
+}
+
+void
+bfad_os_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
+{
+	struct scsi_device *tmp_sdev;
+
+	itnim->last_queue_full_time = jiffies;
+
+	shost_for_each_device(tmp_sdev, sdev->host) {
+		if (tmp_sdev->id != sdev->id)
+			continue;
+		scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1);
+	}
+}
+
+
+
+
+struct bfad_itnim_s *
+bfad_os_get_itnim(struct bfad_im_port_s *im_port, int id)
+{
+	struct bfad_itnim_s   *itnim = NULL;
+
+	/* Search the mapped list for this target ID */
+	list_for_each_entry(itnim, &im_port->itnim_mapped_list, list_entry) {
+		if (id == itnim->scsi_tgt_id)
+			return itnim;
+	}
+
+	return NULL;
+}
+
+/**
+ * Scsi_Host template entry slave_alloc
+ */
+static int
+bfad_im_slave_alloc(struct scsi_device *sdev)
+{
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+
+	if (!rport || fc_remote_port_chkready(rport))
+		return -ENXIO;
+
+	sdev->hostdata = rport->dd_data;
+
+	return 0;
+}
+
+void
+bfad_os_fc_host_init(struct bfad_im_port_s *im_port)
+{
+	struct Scsi_Host *host = im_port->shost;
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfad_port_s    *port = im_port->port;
+	union attr {
+		struct bfa_pport_attr_s pattr;
+		struct bfa_ioc_attr_s  ioc_attr;
+	} attr;
+
+	fc_host_node_name(host) =
+		bfa_os_htonll((bfa_fcs_port_get_nwwn(port->fcs_port)));
+	fc_host_port_name(host) =
+		bfa_os_htonll((bfa_fcs_port_get_pwwn(port->fcs_port)));
+
+	fc_host_supported_classes(host) = FC_COS_CLASS3;
+
+	memset(fc_host_supported_fc4s(host), 0,
+	       sizeof(fc_host_supported_fc4s(host)));
+	if (bfad_supported_fc4s & (BFA_PORT_ROLE_FCP_IM | BFA_PORT_ROLE_FCP_TM))
+		/* For FCP type 0x08 */
+		fc_host_supported_fc4s(host)[2] = 1;
+	if (bfad_supported_fc4s | BFA_PORT_ROLE_FCP_IPFC)
+		/* For LLC/SNAP type 0x05 */
+		fc_host_supported_fc4s(host)[3] = 0x20;
+	/* For fibre channel services type 0x20 */
+	fc_host_supported_fc4s(host)[7] = 1;
+
+	memset(&attr.ioc_attr, 0, sizeof(attr.ioc_attr));
+	bfa_get_attr(&bfad->bfa, &attr.ioc_attr);
+	sprintf(fc_host_symbolic_name(host), "Brocade %s FV%s DV%s",
+		attr.ioc_attr.adapter_attr.model,
+		attr.ioc_attr.adapter_attr.fw_ver, BFAD_DRIVER_VERSION);
+
+	fc_host_supported_speeds(host) = 0;
+	fc_host_supported_speeds(host) |=
+		FC_PORTSPEED_8GBIT | FC_PORTSPEED_4GBIT | FC_PORTSPEED_2GBIT |
+		FC_PORTSPEED_1GBIT;
+
+	memset(&attr.pattr, 0, sizeof(attr.pattr));
+	bfa_pport_get_attr(&bfad->bfa, &attr.pattr);
+	fc_host_maxframe_size(host) = attr.pattr.pport_cfg.maxfrsize;
+}
+
+static void
+bfad_im_fc_rport_add(struct bfad_im_port_s *im_port, struct bfad_itnim_s *itnim)
+{
+	struct fc_rport_identifiers rport_ids;
+	struct fc_rport *fc_rport;
+	struct bfad_itnim_data_s *itnim_data;
+
+	rport_ids.node_name =
+		bfa_os_htonll(bfa_fcs_itnim_get_nwwn(&itnim->fcs_itnim));
+	rport_ids.port_name =
+		bfa_os_htonll(bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim));
+	rport_ids.port_id =
+		bfa_os_hton3b(bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim));
+	rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
+
+	itnim->fc_rport = fc_rport =
+		fc_remote_port_add(im_port->shost, 0, &rport_ids);
+
+	if (!fc_rport)
+		return;
+
+	fc_rport->maxframe_size =
+		bfa_fcs_itnim_get_maxfrsize(&itnim->fcs_itnim);
+	fc_rport->supported_classes = bfa_fcs_itnim_get_cos(&itnim->fcs_itnim);
+
+	itnim_data = fc_rport->dd_data;
+	itnim_data->itnim = itnim;
+
+	rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
+
+	if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN)
+		fc_remote_port_rolechg(fc_rport, rport_ids.roles);
+
+	if ((fc_rport->scsi_target_id != -1)
+	    && (fc_rport->scsi_target_id < MAX_FCP_TARGET))
+		itnim->scsi_tgt_id = fc_rport->scsi_target_id;
+
+	return;
+}
+
+/**
+ * Work queue handler using FC transport service
+* Context: kernel
+ */
+static void
+bfad_im_itnim_work_handler(struct work_struct *work)
+{
+	struct bfad_itnim_s   *itnim = container_of(work, struct bfad_itnim_s,
+							itnim_work);
+	struct bfad_im_s      *im = itnim->im;
+	struct bfad_s         *bfad = im->bfad;
+	struct bfad_im_port_s *im_port;
+	unsigned long   flags;
+	struct fc_rport *fc_rport;
+	wwn_t wwpn;
+	u32 fcid;
+	char wwpn_str[32], fcid_str[16];
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	im_port = itnim->im_port;
+	bfa_trc(bfad, itnim->state);
+	switch (itnim->state) {
+	case ITNIM_STATE_ONLINE:
+		if (!itnim->fc_rport) {
+			spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+			bfad_im_fc_rport_add(im_port, itnim);
+			spin_lock_irqsave(&bfad->bfad_lock, flags);
+			wwpn = bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim);
+			fcid = bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim);
+			wwn2str(wwpn_str, wwpn);
+			fcid2str(fcid_str, fcid);
+			list_add_tail(&itnim->list_entry,
+				&im_port->itnim_mapped_list);
+			bfa_log(bfad->logmod, BFA_LOG_LINUX_ITNIM_ONLINE,
+				im_port->shost->host_no,
+				itnim->scsi_tgt_id,
+				fcid_str, wwpn_str);
+		} else {
+			printk(KERN_WARNING
+				"%s: itnim %llx is already in online state\n",
+				__FUNCTION__,
+				bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim));
+		}
+
+		break;
+	case ITNIM_STATE_OFFLINE_PENDING:
+		itnim->state = ITNIM_STATE_OFFLINE;
+		if (itnim->fc_rport) {
+			fc_rport = itnim->fc_rport;
+			((struct bfad_itnim_data_s *)
+				fc_rport->dd_data)->itnim = NULL;
+			itnim->fc_rport = NULL;
+			if (!(im_port->port->flags & BFAD_PORT_DELETE)) {
+				spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+				fc_rport->dev_loss_tmo =
+					bfa_fcpim_path_tov_get(&bfad->bfa) + 1;
+				fc_remote_port_delete(fc_rport);
+				spin_lock_irqsave(&bfad->bfad_lock, flags);
+			}
+			wwpn = bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim);
+			fcid = bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim);
+			wwn2str(wwpn_str, wwpn);
+			fcid2str(fcid_str, fcid);
+			list_del(&itnim->list_entry);
+			bfa_log(bfad->logmod, BFA_LOG_LINUX_ITNIM_OFFLINE,
+				im_port->shost->host_no,
+				itnim->scsi_tgt_id,
+				fcid_str, wwpn_str);
+		}
+		break;
+	case ITNIM_STATE_FREE:
+		if (itnim->fc_rport) {
+			fc_rport = itnim->fc_rport;
+			((struct bfad_itnim_data_s *)
+				fc_rport->dd_data)->itnim = NULL;
+			itnim->fc_rport = NULL;
+			if (!(im_port->port->flags & BFAD_PORT_DELETE)) {
+				spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+				fc_rport->dev_loss_tmo =
+					bfa_fcpim_path_tov_get(&bfad->bfa) + 1;
+				fc_remote_port_delete(fc_rport);
+				spin_lock_irqsave(&bfad->bfad_lock, flags);
+			}
+			list_del(&itnim->list_entry);
+		}
+
+		kfree(itnim);
+		break;
+	default:
+		bfa_assert(0);
+		break;
+	}
+
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * Scsi_Host template entry, queue a SCSI command to the BFAD.
+ */
+static int
+bfad_im_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
+{
+	struct bfad_im_port_s *im_port =
+		(struct bfad_im_port_s *) cmnd->device->host->hostdata[0];
+	struct bfad_s         *bfad = im_port->bfad;
+	struct bfad_itnim_data_s *itnim_data = cmnd->device->hostdata;
+	struct bfad_itnim_s   *itnim;
+	struct bfa_ioim_s *hal_io;
+	unsigned long   flags;
+	int             rc;
+	s16        sg_cnt = 0;
+	struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+
+	rc = fc_remote_port_chkready(rport);
+	if (rc) {
+		cmnd->result = rc;
+		done(cmnd);
+		return 0;
+	}
+
+	sg_cnt = scsi_dma_map(cmnd);
+
+	if (sg_cnt < 0)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	cmnd->scsi_done = done;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	if (!(bfad->bfad_flags & BFAD_HAL_START_DONE)) {
+		printk(KERN_WARNING
+			"bfad%d, queuecommand %p %x failed, BFA stopped\n",
+		       bfad->inst_no, cmnd, cmnd->cmnd[0]);
+		cmnd->result = ScsiResult(DID_NO_CONNECT, 0);
+		goto out_fail_cmd;
+	}
+
+	itnim = itnim_data->itnim;
+	if (!itnim) {
+		cmnd->result = ScsiResult(DID_IMM_RETRY, 0);
+		goto out_fail_cmd;
+	}
+
+	hal_io = bfa_ioim_alloc(&bfad->bfa, (struct bfad_ioim_s *) cmnd,
+				    itnim->bfa_itnim, sg_cnt);
+	if (!hal_io) {
+		printk(KERN_WARNING "hal_io failure\n");
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		scsi_dma_unmap(cmnd);
+		return SCSI_MLQUEUE_HOST_BUSY;
+	}
+
+	cmnd->host_scribble = (char *)hal_io;
+	bfa_trc_fp(bfad, hal_io->iotag);
+	bfa_ioim_start(hal_io);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	return 0;
+
+out_fail_cmd:
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	scsi_dma_unmap(cmnd);
+	if (done)
+		done(cmnd);
+
+	return 0;
+}
+
+void
+bfad_os_rport_online_wait(struct bfad_s *bfad)
+{
+	int i;
+	int rport_delay = 10;
+
+	for (i = 0; !(bfad->bfad_flags & BFAD_PORT_ONLINE)
+		 && i < bfa_linkup_delay; i++)
+		schedule_timeout_uninterruptible(HZ);
+
+	if (bfad->bfad_flags & BFAD_PORT_ONLINE) {
+		rport_delay = rport_delay < bfa_linkup_delay ?
+				 rport_delay : bfa_linkup_delay;
+		for (i = 0; !(bfad->bfad_flags & BFAD_RPORT_ONLINE)
+			 && i < rport_delay; i++)
+			schedule_timeout_uninterruptible(HZ);
+
+		if (rport_delay > 0 && (bfad->bfad_flags & BFAD_RPORT_ONLINE))
+			schedule_timeout_uninterruptible(rport_delay * HZ);
+	}
+}
+
+int
+bfad_os_get_linkup_delay(struct bfad_s *bfad)
+{
+
+	u8         nwwns = 0;
+	wwn_t           *wwns;
+	int             ldelay;
+
+	/*
+	 * Querying for the boot target port wwns
+	 * -- read from boot information in flash.
+	 * If nwwns > 0 => boot over SAN and set bfa_linkup_delay = 30
+	 * else => local boot machine set bfa_linkup_delay = 10
+	 */
+
+	bfa_iocfc_get_bootwwns(&bfad->bfa, &nwwns, &wwns);
+
+	if (nwwns > 0) {
+		/* If boot over SAN; linkup_delay = 30sec */
+		ldelay = 30;
+	} else {
+		/* If local boot; linkup_delay = 10sec */
+		ldelay = 0;
+	}
+
+	return ldelay;
+}
+
+
diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h
new file mode 100644
index 000000000000..189a5b29e21a
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_im.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFAD_IM_H__
+#define __BFAD_IM_H__
+
+#include "fcs/bfa_fcs_fcpim.h"
+#include "bfad_im_compat.h"
+
+#define FCPI_NAME " fcpim"
+
+void bfad_flags_set(struct bfad_s *bfad, u32 flags);
+bfa_status_t bfad_im_module_init(void);
+void bfad_im_module_exit(void);
+bfa_status_t bfad_im_probe(struct bfad_s *bfad);
+void bfad_im_probe_undo(struct bfad_s *bfad);
+void bfad_im_probe_post(struct bfad_im_s *im);
+bfa_status_t bfad_im_port_new(struct bfad_s *bfad, struct bfad_port_s *port);
+void bfad_im_port_delete(struct bfad_s *bfad, struct bfad_port_s *port);
+void bfad_im_port_online(struct bfad_s *bfad, struct bfad_port_s *port);
+void bfad_im_port_offline(struct bfad_s *bfad, struct bfad_port_s *port);
+void bfad_im_port_clean(struct bfad_im_port_s *im_port);
+int  bfad_im_scsi_host_alloc(struct bfad_s *bfad,
+				struct bfad_im_port_s *im_port);
+void bfad_im_scsi_host_free(struct bfad_s *bfad,
+				struct bfad_im_port_s *im_port);
+
+#define MAX_FCP_TARGET 1024
+#define MAX_FCP_LUN 16384
+#define BFAD_TARGET_RESET_TMO 60
+#define BFAD_LUN_RESET_TMO 60
+#define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
+#define BFA_QUEUE_FULL_RAMP_UP_TIME 120
+#define BFAD_KOBJ_NAME_LEN 20
+
+/*
+ * itnim flags
+ */
+#define ITNIM_MAPPED		0x00000001
+
+#define SCSI_TASK_MGMT		0x00000001
+#define IO_DONE_BIT			0
+
+struct bfad_itnim_data_s {
+	struct bfad_itnim_s *itnim;
+};
+
+struct bfad_im_port_s {
+	struct bfad_s         *bfad;
+	struct bfad_port_s    *port;
+	struct work_struct port_delete_work;
+	int             idr_id;
+	u16        cur_scsi_id;
+	struct list_head binding_list;
+	struct Scsi_Host *shost;
+	struct list_head itnim_mapped_list;
+};
+
+enum bfad_itnim_state {
+	ITNIM_STATE_NONE,
+	ITNIM_STATE_ONLINE,
+	ITNIM_STATE_OFFLINE_PENDING,
+	ITNIM_STATE_OFFLINE,
+	ITNIM_STATE_TIMEOUT,
+	ITNIM_STATE_FREE,
+};
+
+/*
+ * Per itnim data structure
+ */
+struct bfad_itnim_s {
+	struct list_head list_entry;
+	struct bfa_fcs_itnim_s fcs_itnim;
+	struct work_struct itnim_work;
+	u32        flags;
+	enum bfad_itnim_state state;
+	struct bfad_im_s *im;
+	struct bfad_im_port_s *im_port;
+	struct bfad_rport_s *drv_rport;
+	struct fc_rport *fc_rport;
+	struct bfa_itnim_s *bfa_itnim;
+	u16        scsi_tgt_id;
+	u16        queue_work;
+	unsigned long	last_ramp_up_time;
+	unsigned long	last_queue_full_time;
+};
+
+enum bfad_binding_type {
+	FCP_PWWN_BINDING = 0x1,
+	FCP_NWWN_BINDING = 0x2,
+	FCP_FCID_BINDING = 0x3,
+};
+
+struct bfad_fcp_binding {
+	struct list_head list_entry;
+	enum bfad_binding_type binding_type;
+	u16        scsi_target_id;
+	u32        fc_id;
+	wwn_t           nwwn;
+	wwn_t           pwwn;
+};
+
+struct bfad_im_s {
+	struct bfad_s         *bfad;
+	struct workqueue_struct *drv_workq;
+	char   drv_workq_name[BFAD_KOBJ_NAME_LEN];
+};
+
+struct Scsi_Host *bfad_os_scsi_host_alloc(struct bfad_im_port_s *im_port,
+				struct bfad_s *);
+bfa_status_t bfad_os_thread_workq(struct bfad_s *bfad);
+void bfad_os_destroy_workq(struct bfad_im_s *im);
+void bfad_os_itnim_process(struct bfad_itnim_s *itnim_drv);
+void bfad_os_fc_host_init(struct bfad_im_port_s *im_port);
+void bfad_os_init_work(struct bfad_im_port_s *im_port);
+void bfad_os_scsi_host_free(struct bfad_s *bfad,
+				 struct bfad_im_port_s *im_port);
+void bfad_os_ramp_up_qdepth(struct bfad_itnim_s *itnim,
+				 struct scsi_device *sdev);
+void bfad_os_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev);
+struct bfad_itnim_s *bfad_os_get_itnim(struct bfad_im_port_s *im_port, int id);
+int bfad_os_scsi_add_host(struct Scsi_Host *shost,
+		struct bfad_im_port_s *im_port, struct bfad_s *bfad);
+
+/*
+ * scsi_host_template entries
+ */
+void bfad_im_itnim_unmap(struct bfad_im_port_s  *im_port,
+			 struct bfad_itnim_s *itnim);
+
+extern struct scsi_host_template bfad_im_scsi_host_template;
+extern struct scsi_host_template bfad_im_vport_template;
+extern struct fc_function_template bfad_im_fc_function_template;
+extern struct scsi_transport_template *bfad_im_scsi_transport_template;
+
+#endif
diff --git a/drivers/scsi/bfa/bfad_im_compat.h b/drivers/scsi/bfa/bfad_im_compat.h
new file mode 100644
index 000000000000..1d3e74ec338c
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_im_compat.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFAD_IM_COMPAT_H__
+#define __BFAD_IM_COMPAT_H__
+
+extern u32 *bfi_image_buf;
+extern u32 bfi_image_size;
+
+extern struct device_attribute *bfad_im_host_attrs[];
+extern struct device_attribute *bfad_im_vport_attrs[];
+
+u32 *bfad_get_firmware_buf(struct pci_dev *pdev);
+u32 *bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
+			u32 *bfi_image_size, char *fw_name);
+
+static inline u32 *
+bfad_load_fwimg(struct pci_dev *pdev)
+{
+	return(bfad_get_firmware_buf(pdev));
+}
+
+static inline void
+bfad_free_fwimg(void)
+{
+	if (bfi_image_ct_size && bfi_image_ct)
+		vfree(bfi_image_ct);
+	if (bfi_image_cb_size && bfi_image_cb)
+		vfree(bfi_image_cb);
+}
+
+#endif
diff --git a/drivers/scsi/bfa/bfad_intr.c b/drivers/scsi/bfa/bfad_intr.c
new file mode 100644
index 000000000000..f104e029cac9
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_intr.c
@@ -0,0 +1,214 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include "bfad_drv.h"
+#include "bfad_trcmod.h"
+
+BFA_TRC_FILE(LDRV, INTR);
+
+/**
+ *  bfa_isr BFA driver interrupt functions
+ */
+irqreturn_t bfad_intx(int irq, void *dev_id);
+static int msix_disable;
+module_param(msix_disable, int, S_IRUGO | S_IWUSR);
+/**
+ * Line based interrupt handler.
+ */
+irqreturn_t
+bfad_intx(int irq, void *dev_id)
+{
+	struct bfad_s         *bfad = dev_id;
+	struct list_head         doneq;
+	unsigned long   flags;
+	bfa_boolean_t rc;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	rc = bfa_intx(&bfad->bfa);
+	if (!rc) {
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		return IRQ_NONE;
+	}
+
+	bfa_comp_deq(&bfad->bfa, &doneq);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	if (!list_empty(&doneq)) {
+		bfa_comp_process(&bfad->bfa, &doneq);
+
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		bfa_comp_free(&bfad->bfa, &doneq);
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		bfa_trc_fp(bfad, irq);
+	}
+
+	return IRQ_HANDLED;
+
+}
+
+static irqreturn_t
+bfad_msix(int irq, void *dev_id)
+{
+	struct bfad_msix_s *vec = dev_id;
+	struct bfad_s *bfad = vec->bfad;
+	struct list_head doneq;
+	unsigned long   flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+	bfa_msix(&bfad->bfa, vec->msix.entry);
+	bfa_comp_deq(&bfad->bfa, &doneq);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	if (!list_empty(&doneq)) {
+		bfa_comp_process(&bfad->bfa, &doneq);
+
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		bfa_comp_free(&bfad->bfa, &doneq);
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * Initialize the MSIX entry table.
+ */
+static void
+bfad_init_msix_entry(struct bfad_s *bfad, struct msix_entry *msix_entries,
+			 int mask, int max_bit)
+{
+	int             i;
+	int             match = 0x00000001;
+
+	for (i = 0, bfad->nvec = 0; i < MAX_MSIX_ENTRY; i++) {
+		if (mask & match) {
+			bfad->msix_tab[bfad->nvec].msix.entry = i;
+			bfad->msix_tab[bfad->nvec].bfad = bfad;
+			msix_entries[bfad->nvec].entry = i;
+			bfad->nvec++;
+		}
+
+		match <<= 1;
+	}
+
+}
+
+int
+bfad_install_msix_handler(struct bfad_s *bfad)
+{
+	int             i, error = 0;
+
+	for (i = 0; i < bfad->nvec; i++) {
+		error = request_irq(bfad->msix_tab[i].msix.vector,
+				    (irq_handler_t) bfad_msix, 0,
+				    BFAD_DRIVER_NAME, &bfad->msix_tab[i]);
+		bfa_trc(bfad, i);
+		bfa_trc(bfad, bfad->msix_tab[i].msix.vector);
+		if (error) {
+			int             j;
+
+			for (j = 0; j < i; j++)
+				free_irq(bfad->msix_tab[j].msix.vector,
+						&bfad->msix_tab[j]);
+
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * Setup MSIX based interrupt.
+ */
+int
+bfad_setup_intr(struct bfad_s *bfad)
+{
+	int error = 0;
+	u32 mask = 0, i, num_bit = 0, max_bit = 0;
+	struct msix_entry msix_entries[MAX_MSIX_ENTRY];
+
+	/* Call BFA to get the msix map for this PCI function.  */
+	bfa_msix_getvecs(&bfad->bfa, &mask, &num_bit, &max_bit);
+
+	/* Set up the msix entry table */
+	bfad_init_msix_entry(bfad, msix_entries, mask, max_bit);
+
+	if (!msix_disable) {
+		error = pci_enable_msix(bfad->pcidev, msix_entries, bfad->nvec);
+		if (error) {
+			/*
+			 * Only error number of vector is available.
+			 * We don't have a mechanism to map multiple
+			 * interrupts into one vector, so even if we
+			 * can try to request less vectors, we don't
+			 * know how to associate interrupt events to
+			 *  vectors. Linux doesn't dupicate vectors
+			 * in the MSIX table for this case.
+			 */
+
+			printk(KERN_WARNING "bfad%d: "
+				"pci_enable_msix failed (%d),"
+				" use line based.\n", bfad->inst_no, error);
+
+			goto line_based;
+		}
+
+		/* Save the vectors */
+		for (i = 0; i < bfad->nvec; i++) {
+			bfa_trc(bfad, msix_entries[i].vector);
+			bfad->msix_tab[i].msix.vector = msix_entries[i].vector;
+		}
+
+		bfa_msix_init(&bfad->bfa, bfad->nvec);
+
+		bfad->bfad_flags |= BFAD_MSIX_ON;
+
+		return error;
+	}
+
+line_based:
+	error = 0;
+	if (request_irq
+	    (bfad->pcidev->irq, (irq_handler_t) bfad_intx, BFAD_IRQ_FLAGS,
+	     BFAD_DRIVER_NAME, bfad) != 0) {
+		/* Enable interrupt handler failed */
+		return 1;
+	}
+
+	return error;
+}
+
+void
+bfad_remove_intr(struct bfad_s *bfad)
+{
+	int             i;
+
+	if (bfad->bfad_flags & BFAD_MSIX_ON) {
+		for (i = 0; i < bfad->nvec; i++)
+			free_irq(bfad->msix_tab[i].msix.vector,
+					&bfad->msix_tab[i]);
+
+		pci_disable_msix(bfad->pcidev);
+		bfad->bfad_flags &= ~BFAD_MSIX_ON;
+	} else {
+		free_irq(bfad->pcidev->irq, bfad);
+	}
+}
+
+
diff --git a/drivers/scsi/bfa/bfad_ipfc.h b/drivers/scsi/bfa/bfad_ipfc.h
new file mode 100644
index 000000000000..718bc5227671
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_ipfc.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DRV_IPFC_H__
+#define __BFA_DRV_IPFC_H__
+
+
+#define IPFC_NAME ""
+
+#define bfad_ipfc_module_init(x) do {} while (0)
+#define bfad_ipfc_module_exit(x) do {} while (0)
+#define bfad_ipfc_probe(x) do {} while (0)
+#define bfad_ipfc_probe_undo(x) do {} while (0)
+#define bfad_ipfc_port_config(x, y) BFA_STATUS_OK
+#define bfad_ipfc_port_unconfig(x, y) do {} while (0)
+
+#define bfad_ipfc_probe_post(x) do {} while (0)
+#define bfad_ipfc_port_new(x, y, z) BFA_STATUS_OK
+#define bfad_ipfc_port_delete(x, y) do {} while (0)
+#define bfad_ipfc_port_online(x, y) do {} while (0)
+#define bfad_ipfc_port_offline(x, y) do {} while (0)
+
+#define bfad_ip_get_attr(x) BFA_STATUS_FAILED
+#define bfad_ip_reset_drv_stats(x) BFA_STATUS_FAILED
+#define bfad_ip_get_drv_stats(x, y) BFA_STATUS_FAILED
+#define bfad_ip_enable_ipfc(x, y, z) BFA_STATUS_FAILED
+
+
+#endif
diff --git a/drivers/scsi/bfa/bfad_os.c b/drivers/scsi/bfa/bfad_os.c
new file mode 100644
index 000000000000..faf47b4f1a38
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_os.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfad_os.c Linux driver OS specific calls.
+ */
+
+#include "bfa_os_inc.h"
+#include "bfad_drv.h"
+
+void
+bfa_os_gettimeofday(struct bfa_timeval_s *tv)
+{
+	struct timeval  tmp_tv;
+
+	do_gettimeofday(&tmp_tv);
+	tv->tv_sec = (u32) tmp_tv.tv_sec;
+	tv->tv_usec = (u32) tmp_tv.tv_usec;
+}
+
+void
+bfa_os_printf(struct bfa_log_mod_s *log_mod, u32 msg_id,
+			const char *fmt, ...)
+{
+	va_list ap;
+	#define BFA_STRING_256	256
+	char tmp[BFA_STRING_256];
+
+	va_start(ap, fmt);
+	vsprintf(tmp, fmt, ap);
+	va_end(ap);
+
+	printk(tmp);
+}
+
+
diff --git a/drivers/scsi/bfa/bfad_tm.h b/drivers/scsi/bfa/bfad_tm.h
new file mode 100644
index 000000000000..4901b1b7df02
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_tm.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * Brocade Fibre Channel HBA Linux Target Mode Driver
+ */
+
+/**
+ *  tm/dummy/bfad_tm.h BFA callback dummy header file for BFA Linux target mode PCI interface module.
+ */
+
+#ifndef __BFAD_TM_H__
+#define __BFAD_TM_H__
+
+#include <defs/bfa_defs_status.h>
+
+#define FCPT_NAME 		""
+
+/*
+ * Called from base Linux driver on (De)Init events
+ */
+
+/* attach tgt template with scst */
+#define bfad_tm_module_init()	do {} while (0)
+
+/* detach/release tgt template */
+#define bfad_tm_module_exit()	do {} while (0)
+
+#define bfad_tm_probe(x)	do {} while (0)
+#define bfad_tm_probe_undo(x)	do {} while (0)
+#define bfad_tm_probe_post(x)	do {} while (0)
+
+/*
+ * Called by base Linux driver but triggered by BFA FCS on config events
+ */
+#define bfad_tm_port_new(x, y)		BFA_STATUS_OK
+#define bfad_tm_port_delete(x, y)	do {} while (0)
+
+/*
+ * Called by base Linux driver but triggered by BFA FCS on PLOGI/O events
+ */
+#define bfad_tm_port_online(x, y)	do {} while (0)
+#define bfad_tm_port_offline(x, y)	do {} while (0)
+
+#endif
diff --git a/drivers/scsi/bfa/bfad_trcmod.h b/drivers/scsi/bfa/bfad_trcmod.h
new file mode 100644
index 000000000000..2827b2acd041
--- /dev/null
+++ b/drivers/scsi/bfa/bfad_trcmod.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfad_trcmod.h Linux driver trace modules
+ */
+
+
+#ifndef __BFAD_TRCMOD_H__
+#define __BFAD_TRCMOD_H__
+
+#include <cs/bfa_trc.h>
+
+/*
+ * !!! Only append to the enums defined here to avoid any versioning
+ * !!! needed between trace utility and driver version
+ */
+enum {
+	/* 2.6 Driver */
+	BFA_TRC_LDRV_BFAD		= 1,
+	BFA_TRC_LDRV_BFAD_2_6		= 2,
+	BFA_TRC_LDRV_BFAD_2_6_9		= 3,
+	BFA_TRC_LDRV_BFAD_2_6_10	= 4,
+	BFA_TRC_LDRV_INTR		= 5,
+	BFA_TRC_LDRV_IOCTL		= 6,
+	BFA_TRC_LDRV_OS			= 7,
+	BFA_TRC_LDRV_IM			= 8,
+	BFA_TRC_LDRV_IM_2_6		= 9,
+	BFA_TRC_LDRV_IM_2_6_9		= 10,
+	BFA_TRC_LDRV_IM_2_6_10		= 11,
+	BFA_TRC_LDRV_TM			= 12,
+	BFA_TRC_LDRV_IPFC		= 13,
+	BFA_TRC_LDRV_IM_2_4		= 14,
+	BFA_TRC_LDRV_IM_VMW		= 15,
+	BFA_TRC_LDRV_IM_LT_2_6_10	= 16,
+};
+
+#endif /* __BFAD_TRCMOD_H__ */
diff --git a/drivers/scsi/bfa/fab.c b/drivers/scsi/bfa/fab.c
new file mode 100644
index 000000000000..7e3a4d5d7bb4
--- /dev/null
+++ b/drivers/scsi/bfa/fab.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "lport_priv.h"
+
+/**
+ *  fab.c port fab implementation.
+ */
+
+/**
+ *  bfa_fcs_port_fab_public port fab public functions
+ */
+
+/**
+ *   Called by port to initialize fabric services of the base port.
+ */
+void
+bfa_fcs_port_fab_init(struct bfa_fcs_port_s *port)
+{
+	bfa_fcs_port_ns_init(port);
+	bfa_fcs_port_scn_init(port);
+	bfa_fcs_port_ms_init(port);
+}
+
+/**
+ *   Called by port to notify transition to online state.
+ */
+void
+bfa_fcs_port_fab_online(struct bfa_fcs_port_s *port)
+{
+	bfa_fcs_port_ns_online(port);
+	bfa_fcs_port_scn_online(port);
+}
+
+/**
+ *   Called by port to notify transition to offline state.
+ */
+void
+bfa_fcs_port_fab_offline(struct bfa_fcs_port_s *port)
+{
+	bfa_fcs_port_ns_offline(port);
+	bfa_fcs_port_scn_offline(port);
+	bfa_fcs_port_ms_offline(port);
+}
diff --git a/drivers/scsi/bfa/fabric.c b/drivers/scsi/bfa/fabric.c
new file mode 100644
index 000000000000..a8b14c47b009
--- /dev/null
+++ b/drivers/scsi/bfa/fabric.c
@@ -0,0 +1,1278 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fabric.c Fabric module implementation.
+ */
+
+#include "fcs_fabric.h"
+#include "fcs_lport.h"
+#include "fcs_vport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs_auth.h"
+#include "fcs.h"
+#include "fcbuild.h"
+#include <log/bfa_log_fcs.h>
+#include <aen/bfa_aen_port.h>
+#include <bfa_svc.h>
+
+BFA_TRC_FILE(FCS, FABRIC);
+
+#define BFA_FCS_FABRIC_RETRY_DELAY	(2000)	/* Milliseconds */
+#define BFA_FCS_FABRIC_CLEANUP_DELAY	(10000)	/* Milliseconds */
+
+#define bfa_fcs_fabric_set_opertype(__fabric) do {          \
+    if (bfa_pport_get_topology((__fabric)->fcs->bfa)    \
+				== BFA_PPORT_TOPOLOGY_P2P)   \
+	    (__fabric)->oper_type = BFA_PPORT_TYPE_NPORT;       \
+    else                                                    \
+	    (__fabric)->oper_type = BFA_PPORT_TYPE_NLPORT;      \
+} while (0)
+
+/*
+ * forward declarations
+ */
+static void     bfa_fcs_fabric_init(struct bfa_fcs_fabric_s *fabric);
+static void     bfa_fcs_fabric_login(struct bfa_fcs_fabric_s *fabric);
+static void     bfa_fcs_fabric_notify_online(struct bfa_fcs_fabric_s *fabric);
+static void     bfa_fcs_fabric_notify_offline(struct bfa_fcs_fabric_s *fabric);
+static void     bfa_fcs_fabric_delay(void *cbarg);
+static void     bfa_fcs_fabric_delete(struct bfa_fcs_fabric_s *fabric);
+static void     bfa_fcs_fabric_delete_comp(void *cbarg);
+static void     bfa_fcs_fabric_process_uf(struct bfa_fcs_fabric_s *fabric,
+					  struct fchs_s *fchs, u16 len);
+static void     bfa_fcs_fabric_process_flogi(struct bfa_fcs_fabric_s *fabric,
+					     struct fchs_s *fchs, u16 len);
+static void     bfa_fcs_fabric_send_flogi_acc(struct bfa_fcs_fabric_s *fabric);
+static void     bfa_fcs_fabric_flogiacc_comp(void *fcsarg,
+					     struct bfa_fcxp_s *fcxp,
+					     void *cbarg, bfa_status_t status,
+					     u32 rsp_len,
+					     u32 resid_len,
+					     struct fchs_s *rspfchs);
+/**
+ *  fcs_fabric_sm fabric state machine functions
+ */
+
+/**
+ * Fabric state machine events
+ */
+enum bfa_fcs_fabric_event {
+	BFA_FCS_FABRIC_SM_CREATE = 1,	/*  fabric create from driver */
+	BFA_FCS_FABRIC_SM_DELETE = 2,	/*  fabric delete from driver */
+	BFA_FCS_FABRIC_SM_LINK_DOWN = 3,	/*  link down from port */
+	BFA_FCS_FABRIC_SM_LINK_UP = 4,	/*  link up from port */
+	BFA_FCS_FABRIC_SM_CONT_OP = 5,	/*  continue op from flogi/auth */
+	BFA_FCS_FABRIC_SM_RETRY_OP = 6,	/*  continue op from flogi/auth */
+	BFA_FCS_FABRIC_SM_NO_FABRIC = 7,	/*  no fabric from flogi/auth
+						 */
+	BFA_FCS_FABRIC_SM_PERF_EVFP = 8,	/*  perform EVFP from
+						 *flogi/auth */
+	BFA_FCS_FABRIC_SM_ISOLATE = 9,	/*  isolate from EVFP processing */
+	BFA_FCS_FABRIC_SM_NO_TAGGING = 10,/*  no VFT tagging from EVFP */
+	BFA_FCS_FABRIC_SM_DELAYED = 11,	/*  timeout delay event */
+	BFA_FCS_FABRIC_SM_AUTH_FAILED = 12,	/*  authentication failed */
+	BFA_FCS_FABRIC_SM_AUTH_SUCCESS = 13,	/*  authentication successful
+						 */
+	BFA_FCS_FABRIC_SM_DELCOMP = 14,	/*  all vports deleted event */
+	BFA_FCS_FABRIC_SM_LOOPBACK = 15,	/*  Received our own FLOGI */
+	BFA_FCS_FABRIC_SM_START = 16,	/*  fabric delete from driver */
+};
+
+static void     bfa_fcs_fabric_sm_uninit(struct bfa_fcs_fabric_s *fabric,
+					 enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_created(struct bfa_fcs_fabric_s *fabric,
+					  enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_linkdown(struct bfa_fcs_fabric_s *fabric,
+					   enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_flogi(struct bfa_fcs_fabric_s *fabric,
+					enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_flogi_retry(struct bfa_fcs_fabric_s *fabric,
+					      enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_auth(struct bfa_fcs_fabric_s *fabric,
+				       enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_auth_failed(struct bfa_fcs_fabric_s *fabric,
+					      enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_loopback(struct bfa_fcs_fabric_s *fabric,
+					   enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_nofabric(struct bfa_fcs_fabric_s *fabric,
+					   enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
+					 enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_evfp(struct bfa_fcs_fabric_s *fabric,
+				       enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_evfp_done(struct bfa_fcs_fabric_s *fabric,
+					    enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_isolated(struct bfa_fcs_fabric_s *fabric,
+					   enum bfa_fcs_fabric_event event);
+static void     bfa_fcs_fabric_sm_deleting(struct bfa_fcs_fabric_s *fabric,
+					   enum bfa_fcs_fabric_event event);
+/**
+ *   Beginning state before fabric creation.
+ */
+static void
+bfa_fcs_fabric_sm_uninit(struct bfa_fcs_fabric_s *fabric,
+			 enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_CREATE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_created);
+		bfa_fcs_fabric_init(fabric);
+		bfa_fcs_lport_init(&fabric->bport, fabric->fcs, FC_VF_ID_NULL,
+				   &fabric->bport.port_cfg, NULL);
+		break;
+
+	case BFA_FCS_FABRIC_SM_LINK_UP:
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   Beginning state before fabric creation.
+ */
+static void
+bfa_fcs_fabric_sm_created(struct bfa_fcs_fabric_s *fabric,
+			  enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_START:
+		if (bfa_pport_is_linkup(fabric->fcs->bfa)) {
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
+			bfa_fcs_fabric_login(fabric);
+		} else
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+		break;
+
+	case BFA_FCS_FABRIC_SM_LINK_UP:
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		break;
+
+	case BFA_FCS_FABRIC_SM_DELETE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_uninit);
+		bfa_fcs_modexit_comp(fabric->fcs);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   Link is down, awaiting LINK UP event from port. This is also the
+ *   first state at fabric creation.
+ */
+static void
+bfa_fcs_fabric_sm_linkdown(struct bfa_fcs_fabric_s *fabric,
+			   enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_LINK_UP:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
+		bfa_fcs_fabric_login(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_RETRY_OP:
+		break;
+
+	case BFA_FCS_FABRIC_SM_DELETE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+		bfa_fcs_fabric_delete(fabric);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   FLOGI is in progress, awaiting FLOGI reply.
+ */
+static void
+bfa_fcs_fabric_sm_flogi(struct bfa_fcs_fabric_s *fabric,
+			enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_CONT_OP:
+
+		bfa_pport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
+		fabric->fab_type = BFA_FCS_FABRIC_SWITCHED;
+
+		if (fabric->auth_reqd && fabric->is_auth) {
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_auth);
+			bfa_trc(fabric->fcs, event);
+		} else {
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_online);
+			bfa_fcs_fabric_notify_online(fabric);
+		}
+		break;
+
+	case BFA_FCS_FABRIC_SM_RETRY_OP:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi_retry);
+		bfa_timer_start(fabric->fcs->bfa, &fabric->delay_timer,
+				bfa_fcs_fabric_delay, fabric,
+				BFA_FCS_FABRIC_RETRY_DELAY);
+		break;
+
+	case BFA_FCS_FABRIC_SM_LOOPBACK:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_loopback);
+		bfa_lps_discard(fabric->lps);
+		bfa_fcs_fabric_set_opertype(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_NO_FABRIC:
+		fabric->fab_type = BFA_FCS_FABRIC_N2N;
+		bfa_pport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
+		bfa_fcs_fabric_notify_online(fabric);
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_nofabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+		bfa_lps_discard(fabric->lps);
+		break;
+
+	case BFA_FCS_FABRIC_SM_DELETE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+		bfa_lps_discard(fabric->lps);
+		bfa_fcs_fabric_delete(fabric);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+
+static void
+bfa_fcs_fabric_sm_flogi_retry(struct bfa_fcs_fabric_s *fabric,
+			      enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_DELAYED:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
+		bfa_fcs_fabric_login(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+		bfa_timer_stop(&fabric->delay_timer);
+		break;
+
+	case BFA_FCS_FABRIC_SM_DELETE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+		bfa_timer_stop(&fabric->delay_timer);
+		bfa_fcs_fabric_delete(fabric);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   Authentication is in progress, awaiting authentication results.
+ */
+static void
+bfa_fcs_fabric_sm_auth(struct bfa_fcs_fabric_s *fabric,
+		       enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_AUTH_FAILED:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_auth_failed);
+		bfa_lps_discard(fabric->lps);
+		break;
+
+	case BFA_FCS_FABRIC_SM_AUTH_SUCCESS:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_online);
+		bfa_fcs_fabric_notify_online(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_PERF_EVFP:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_evfp);
+		break;
+
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+		bfa_lps_discard(fabric->lps);
+		break;
+
+	case BFA_FCS_FABRIC_SM_DELETE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+		bfa_fcs_fabric_delete(fabric);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   Authentication failed
+ */
+static void
+bfa_fcs_fabric_sm_auth_failed(struct bfa_fcs_fabric_s *fabric,
+			      enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+		bfa_fcs_fabric_notify_offline(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_DELETE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+		bfa_fcs_fabric_delete(fabric);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   Port is in loopback mode.
+ */
+static void
+bfa_fcs_fabric_sm_loopback(struct bfa_fcs_fabric_s *fabric,
+			   enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+		bfa_fcs_fabric_notify_offline(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_DELETE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+		bfa_fcs_fabric_delete(fabric);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   There is no attached fabric - private loop or NPort-to-NPort topology.
+ */
+static void
+bfa_fcs_fabric_sm_nofabric(struct bfa_fcs_fabric_s *fabric,
+			   enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+		bfa_lps_discard(fabric->lps);
+		bfa_fcs_fabric_notify_offline(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_DELETE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+		bfa_fcs_fabric_delete(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_NO_FABRIC:
+		bfa_trc(fabric->fcs, fabric->bb_credit);
+		bfa_pport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   Fabric is online - normal operating state.
+ */
+static void
+bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
+			 enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+		bfa_lps_discard(fabric->lps);
+		bfa_fcs_fabric_notify_offline(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_DELETE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+		bfa_fcs_fabric_delete(fabric);
+		break;
+
+	case BFA_FCS_FABRIC_SM_AUTH_FAILED:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_auth_failed);
+		bfa_lps_discard(fabric->lps);
+		break;
+
+	case BFA_FCS_FABRIC_SM_AUTH_SUCCESS:
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   Exchanging virtual fabric parameters.
+ */
+static void
+bfa_fcs_fabric_sm_evfp(struct bfa_fcs_fabric_s *fabric,
+		       enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_CONT_OP:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_evfp_done);
+		break;
+
+	case BFA_FCS_FABRIC_SM_ISOLATE:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_isolated);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+/**
+ *   EVFP exchange complete and VFT tagging is enabled.
+ */
+static void
+bfa_fcs_fabric_sm_evfp_done(struct bfa_fcs_fabric_s *fabric,
+			    enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+}
+
+/**
+ *   Port is isolated after EVFP exchange due to VF_ID mismatch (N and F).
+ */
+static void
+bfa_fcs_fabric_sm_isolated(struct bfa_fcs_fabric_s *fabric,
+			   enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	bfa_log(fabric->fcs->logm, BFA_LOG_FCS_FABRIC_ISOLATED,
+		fabric->bport.port_cfg.pwwn, fabric->fcs->port_vfid,
+		fabric->event_arg.swp_vfid);
+}
+
+/**
+ *   Fabric is being deleted, awaiting vport delete completions.
+ */
+static void
+bfa_fcs_fabric_sm_deleting(struct bfa_fcs_fabric_s *fabric,
+			   enum bfa_fcs_fabric_event event)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_FABRIC_SM_DELCOMP:
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_uninit);
+		bfa_fcs_modexit_comp(fabric->fcs);
+		break;
+
+	case BFA_FCS_FABRIC_SM_LINK_UP:
+		break;
+
+	case BFA_FCS_FABRIC_SM_LINK_DOWN:
+		bfa_fcs_fabric_notify_offline(fabric);
+		break;
+
+	default:
+		bfa_sm_fault(fabric->fcs, event);
+	}
+}
+
+
+
+/**
+ *  fcs_fabric_private fabric private functions
+ */
+
+static void
+bfa_fcs_fabric_init(struct bfa_fcs_fabric_s *fabric)
+{
+	struct bfa_port_cfg_s *port_cfg = &fabric->bport.port_cfg;
+
+	port_cfg->roles = BFA_PORT_ROLE_FCP_IM;
+	port_cfg->nwwn = bfa_ioc_get_nwwn(&fabric->fcs->bfa->ioc);
+	port_cfg->pwwn = bfa_ioc_get_pwwn(&fabric->fcs->bfa->ioc);
+}
+
+/**
+ * Port Symbolic Name Creation for base port.
+ */
+void
+bfa_fcs_fabric_psymb_init(struct bfa_fcs_fabric_s *fabric)
+{
+	struct bfa_port_cfg_s *port_cfg = &fabric->bport.port_cfg;
+	struct bfa_adapter_attr_s adapter_attr;
+	struct bfa_fcs_driver_info_s *driver_info = &fabric->fcs->driver_info;
+
+	bfa_os_memset((void *)&adapter_attr, 0,
+		      sizeof(struct bfa_adapter_attr_s));
+	bfa_ioc_get_adapter_attr(&fabric->fcs->bfa->ioc, &adapter_attr);
+
+	/*
+	 * Model name/number
+	 */
+	strncpy((char *)&port_cfg->sym_name, adapter_attr.model,
+		BFA_FCS_PORT_SYMBNAME_MODEL_SZ);
+	strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+		sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+
+	/*
+	 * Driver Version
+	 */
+	strncat((char *)&port_cfg->sym_name, (char *)driver_info->version,
+		BFA_FCS_PORT_SYMBNAME_VERSION_SZ);
+	strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+		sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+
+	/*
+	 * Host machine name
+	 */
+	strncat((char *)&port_cfg->sym_name,
+		(char *)driver_info->host_machine_name,
+		BFA_FCS_PORT_SYMBNAME_MACHINENAME_SZ);
+	strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+		sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+
+	/*
+	 * Host OS Info :
+	 * If OS Patch Info is not there, do not truncate any bytes from the
+	 * OS name string and instead copy the entire OS info string (64 bytes).
+	 */
+	if (driver_info->host_os_patch[0] == '\0') {
+		strncat((char *)&port_cfg->sym_name,
+			(char *)driver_info->host_os_name, BFA_FCS_OS_STR_LEN);
+		strncat((char *)&port_cfg->sym_name,
+			BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+			sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+	} else {
+		strncat((char *)&port_cfg->sym_name,
+			(char *)driver_info->host_os_name,
+			BFA_FCS_PORT_SYMBNAME_OSINFO_SZ);
+		strncat((char *)&port_cfg->sym_name,
+			BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+			sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+
+		/*
+		 * Append host OS Patch Info
+		 */
+		strncat((char *)&port_cfg->sym_name,
+			(char *)driver_info->host_os_patch,
+			BFA_FCS_PORT_SYMBNAME_OSPATCH_SZ);
+	}
+
+	/*
+	 * null terminate
+	 */
+	port_cfg->sym_name.symname[BFA_SYMNAME_MAXLEN - 1] = 0;
+}
+
+/**
+ * bfa lps login completion callback
+ */
+void
+bfa_cb_lps_flogi_comp(void *bfad, void *uarg, bfa_status_t status)
+{
+	struct bfa_fcs_fabric_s *fabric = uarg;
+
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_trc(fabric->fcs, status);
+
+	switch (status) {
+	case BFA_STATUS_OK:
+		fabric->stats.flogi_accepts++;
+		break;
+
+	case BFA_STATUS_INVALID_MAC:
+		/*
+		 * Only for CNA
+		 */
+		fabric->stats.flogi_acc_err++;
+		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_RETRY_OP);
+
+		return;
+
+	case BFA_STATUS_EPROTOCOL:
+		switch (bfa_lps_get_extstatus(fabric->lps)) {
+		case BFA_EPROTO_BAD_ACCEPT:
+			fabric->stats.flogi_acc_err++;
+			break;
+
+		case BFA_EPROTO_UNKNOWN_RSP:
+			fabric->stats.flogi_unknown_rsp++;
+			break;
+
+		default:
+			break;
+		}
+		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_RETRY_OP);
+
+		return;
+
+	case BFA_STATUS_FABRIC_RJT:
+		fabric->stats.flogi_rejects++;
+		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_RETRY_OP);
+		return;
+
+	default:
+		fabric->stats.flogi_rsp_err++;
+		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_RETRY_OP);
+		return;
+	}
+
+	fabric->bb_credit = bfa_lps_get_peer_bbcredit(fabric->lps);
+	bfa_trc(fabric->fcs, fabric->bb_credit);
+
+	if (!bfa_lps_is_brcd_fabric(fabric->lps))
+		fabric->fabric_name = bfa_lps_get_peer_nwwn(fabric->lps);
+
+	/*
+	 * Check port type. It should be 1 = F-port.
+	 */
+	if (bfa_lps_is_fport(fabric->lps)) {
+		fabric->bport.pid = bfa_lps_get_pid(fabric->lps);
+		fabric->is_npiv = bfa_lps_is_npiv_en(fabric->lps);
+		fabric->is_auth = bfa_lps_is_authreq(fabric->lps);
+		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_CONT_OP);
+	} else {
+		/*
+		 * Nport-2-Nport direct attached
+		 */
+		fabric->bport.port_topo.pn2n.rem_port_wwn =
+			bfa_lps_get_peer_pwwn(fabric->lps);
+		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_NO_FABRIC);
+	}
+
+	bfa_trc(fabric->fcs, fabric->bport.pid);
+	bfa_trc(fabric->fcs, fabric->is_npiv);
+	bfa_trc(fabric->fcs, fabric->is_auth);
+}
+
+/**
+ * 		Allocate and send FLOGI.
+ */
+static void
+bfa_fcs_fabric_login(struct bfa_fcs_fabric_s *fabric)
+{
+	struct bfa_s   *bfa = fabric->fcs->bfa;
+	struct bfa_port_cfg_s *pcfg = &fabric->bport.port_cfg;
+	u8         alpa = 0;
+
+	if (bfa_pport_get_topology(bfa) == BFA_PPORT_TOPOLOGY_LOOP)
+		alpa = bfa_pport_get_myalpa(bfa);
+
+	bfa_lps_flogi(fabric->lps, fabric, alpa, bfa_pport_get_maxfrsize(bfa),
+		      pcfg->pwwn, pcfg->nwwn, fabric->auth_reqd);
+
+	fabric->stats.flogi_sent++;
+}
+
+static void
+bfa_fcs_fabric_notify_online(struct bfa_fcs_fabric_s *fabric)
+{
+	struct bfa_fcs_vport_s *vport;
+	struct list_head *qe, *qen;
+
+	bfa_trc(fabric->fcs, fabric->fabric_name);
+
+	bfa_fcs_fabric_set_opertype(fabric);
+	fabric->stats.fabric_onlines++;
+
+	/**
+	 * notify online event to base and then virtual ports
+	 */
+	bfa_fcs_port_online(&fabric->bport);
+
+	list_for_each_safe(qe, qen, &fabric->vport_q) {
+		vport = (struct bfa_fcs_vport_s *)qe;
+		bfa_fcs_vport_online(vport);
+	}
+}
+
+static void
+bfa_fcs_fabric_notify_offline(struct bfa_fcs_fabric_s *fabric)
+{
+	struct bfa_fcs_vport_s *vport;
+	struct list_head *qe, *qen;
+
+	bfa_trc(fabric->fcs, fabric->fabric_name);
+	fabric->stats.fabric_offlines++;
+
+	/**
+	 * notify offline event first to vports and then base port.
+	 */
+	list_for_each_safe(qe, qen, &fabric->vport_q) {
+		vport = (struct bfa_fcs_vport_s *)qe;
+		bfa_fcs_vport_offline(vport);
+	}
+
+	bfa_fcs_port_offline(&fabric->bport);
+
+	fabric->fabric_name = 0;
+	fabric->fabric_ip_addr[0] = 0;
+}
+
+static void
+bfa_fcs_fabric_delay(void *cbarg)
+{
+	struct bfa_fcs_fabric_s *fabric = cbarg;
+
+	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_DELAYED);
+}
+
+/**
+ * Delete all vports and wait for vport delete completions.
+ */
+static void
+bfa_fcs_fabric_delete(struct bfa_fcs_fabric_s *fabric)
+{
+	struct bfa_fcs_vport_s *vport;
+	struct list_head *qe, *qen;
+
+	list_for_each_safe(qe, qen, &fabric->vport_q) {
+		vport = (struct bfa_fcs_vport_s *)qe;
+		bfa_fcs_vport_delete(vport);
+	}
+
+	bfa_fcs_port_delete(&fabric->bport);
+	bfa_wc_wait(&fabric->wc);
+}
+
+static void
+bfa_fcs_fabric_delete_comp(void *cbarg)
+{
+	struct bfa_fcs_fabric_s *fabric = cbarg;
+
+	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_DELCOMP);
+}
+
+
+
+/**
+ *  fcs_fabric_public fabric public functions
+ */
+
+/**
+ *   Module initialization
+ */
+void
+bfa_fcs_fabric_modinit(struct bfa_fcs_s *fcs)
+{
+	struct bfa_fcs_fabric_s *fabric;
+
+	fabric = &fcs->fabric;
+	bfa_os_memset(fabric, 0, sizeof(struct bfa_fcs_fabric_s));
+
+	/**
+	 * Initialize base fabric.
+	 */
+	fabric->fcs = fcs;
+	INIT_LIST_HEAD(&fabric->vport_q);
+	INIT_LIST_HEAD(&fabric->vf_q);
+	fabric->lps = bfa_lps_alloc(fcs->bfa);
+	bfa_assert(fabric->lps);
+
+	/**
+	 * Initialize fabric delete completion handler. Fabric deletion is complete
+	 * when the last vport delete is complete.
+	 */
+	bfa_wc_init(&fabric->wc, bfa_fcs_fabric_delete_comp, fabric);
+	bfa_wc_up(&fabric->wc);	/* For the base port */
+
+	bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_uninit);
+	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_CREATE);
+	bfa_trc(fcs, 0);
+}
+
+/**
+ *   Module cleanup
+ */
+void
+bfa_fcs_fabric_modexit(struct bfa_fcs_s *fcs)
+{
+	struct bfa_fcs_fabric_s *fabric;
+
+	bfa_trc(fcs, 0);
+
+	/**
+	 * Cleanup base fabric.
+	 */
+	fabric = &fcs->fabric;
+	bfa_lps_delete(fabric->lps);
+	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_DELETE);
+}
+
+/**
+ * Fabric module start -- kick starts FCS actions
+ */
+void
+bfa_fcs_fabric_modstart(struct bfa_fcs_s *fcs)
+{
+	struct bfa_fcs_fabric_s *fabric;
+
+	bfa_trc(fcs, 0);
+	fabric = &fcs->fabric;
+	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_START);
+}
+
+/**
+ *   Suspend fabric activity as part of driver suspend.
+ */
+void
+bfa_fcs_fabric_modsusp(struct bfa_fcs_s *fcs)
+{
+}
+
+bfa_boolean_t
+bfa_fcs_fabric_is_loopback(struct bfa_fcs_fabric_s *fabric)
+{
+	return (bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_loopback));
+}
+
+enum bfa_pport_type
+bfa_fcs_fabric_port_type(struct bfa_fcs_fabric_s *fabric)
+{
+	return fabric->oper_type;
+}
+
+/**
+ *   Link up notification from BFA physical port module.
+ */
+void
+bfa_fcs_fabric_link_up(struct bfa_fcs_fabric_s *fabric)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_LINK_UP);
+}
+
+/**
+ *   Link down notification from BFA physical port module.
+ */
+void
+bfa_fcs_fabric_link_down(struct bfa_fcs_fabric_s *fabric)
+{
+	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_LINK_DOWN);
+}
+
+/**
+ *   A child vport is being created in the fabric.
+ *
+ *   Call from vport module at vport creation. A list of base port and vports
+ *   belonging to a fabric is maintained to propagate link events.
+ *
+ *   param[in] fabric - Fabric instance. This can be a base fabric or vf.
+ *   param[in] vport  - Vport being created.
+ *
+ *   @return None (always succeeds)
+ */
+void
+bfa_fcs_fabric_addvport(struct bfa_fcs_fabric_s *fabric,
+			struct bfa_fcs_vport_s *vport)
+{
+	/**
+	 * - add vport to fabric's vport_q
+	 */
+	bfa_trc(fabric->fcs, fabric->vf_id);
+
+	list_add_tail(&vport->qe, &fabric->vport_q);
+	fabric->num_vports++;
+	bfa_wc_up(&fabric->wc);
+}
+
+/**
+ *   A child vport is being deleted from fabric.
+ *
+ *   Vport is being deleted.
+ */
+void
+bfa_fcs_fabric_delvport(struct bfa_fcs_fabric_s *fabric,
+			struct bfa_fcs_vport_s *vport)
+{
+	list_del(&vport->qe);
+	fabric->num_vports--;
+	bfa_wc_down(&fabric->wc);
+}
+
+/**
+ *   Base port is deleted.
+ */
+void
+bfa_fcs_fabric_port_delete_comp(struct bfa_fcs_fabric_s *fabric)
+{
+	bfa_wc_down(&fabric->wc);
+}
+
+/**
+ *    Check if fabric is online.
+ *
+ *   param[in] fabric - Fabric instance. This can be a base fabric or vf.
+ *
+ *   @return  TRUE/FALSE
+ */
+int
+bfa_fcs_fabric_is_online(struct bfa_fcs_fabric_s *fabric)
+{
+	return (bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_online));
+}
+
+
+bfa_status_t
+bfa_fcs_fabric_addvf(struct bfa_fcs_fabric_s *vf, struct bfa_fcs_s *fcs,
+		     struct bfa_port_cfg_s *port_cfg,
+		     struct bfad_vf_s *vf_drv)
+{
+	bfa_sm_set_state(vf, bfa_fcs_fabric_sm_uninit);
+	return BFA_STATUS_OK;
+}
+
+/**
+ * Lookup for a vport withing a fabric given its pwwn
+ */
+struct bfa_fcs_vport_s *
+bfa_fcs_fabric_vport_lookup(struct bfa_fcs_fabric_s *fabric, wwn_t pwwn)
+{
+	struct bfa_fcs_vport_s *vport;
+	struct list_head *qe;
+
+	list_for_each(qe, &fabric->vport_q) {
+		vport = (struct bfa_fcs_vport_s *)qe;
+		if (bfa_fcs_port_get_pwwn(&vport->lport) == pwwn)
+			return vport;
+	}
+
+	return NULL;
+}
+
+/**
+ *    In a given fabric, return the number of lports.
+ *
+ *   param[in] fabric - Fabric instance. This can be a base fabric or vf.
+ *
+*    @return : 1 or more.
+ */
+u16
+bfa_fcs_fabric_vport_count(struct bfa_fcs_fabric_s *fabric)
+{
+	return (fabric->num_vports);
+}
+
+/**
+ * 		Unsolicited frame receive handling.
+ */
+void
+bfa_fcs_fabric_uf_recv(struct bfa_fcs_fabric_s *fabric, struct fchs_s *fchs,
+		       u16 len)
+{
+	u32        pid = fchs->d_id;
+	struct bfa_fcs_vport_s *vport;
+	struct list_head *qe;
+	struct fc_els_cmd_s   *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+	struct fc_logi_s     *flogi = (struct fc_logi_s *) els_cmd;
+
+	bfa_trc(fabric->fcs, len);
+	bfa_trc(fabric->fcs, pid);
+
+	/**
+	 * Look for our own FLOGI frames being looped back. This means an
+	 * external loopback cable is in place. Our own FLOGI frames are
+	 * sometimes looped back when switch port gets temporarily bypassed.
+	 */
+	if ((pid == bfa_os_ntoh3b(FC_FABRIC_PORT))
+	    && (els_cmd->els_code == FC_ELS_FLOGI)
+	    && (flogi->port_name == bfa_fcs_port_get_pwwn(&fabric->bport))) {
+		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_LOOPBACK);
+		return;
+	}
+
+	/**
+	 * FLOGI/EVFP exchanges should be consumed by base fabric.
+	 */
+	if (fchs->d_id == bfa_os_hton3b(FC_FABRIC_PORT)) {
+		bfa_trc(fabric->fcs, pid);
+		bfa_fcs_fabric_process_uf(fabric, fchs, len);
+		return;
+	}
+
+	if (fabric->bport.pid == pid) {
+		/**
+		 * All authentication frames should be routed to auth
+		 */
+		bfa_trc(fabric->fcs, els_cmd->els_code);
+		if (els_cmd->els_code == FC_ELS_AUTH) {
+			bfa_trc(fabric->fcs, els_cmd->els_code);
+			fabric->auth.response = (u8 *) els_cmd;
+			return;
+		}
+
+		bfa_trc(fabric->fcs, *(u8 *) ((u8 *) fchs));
+		bfa_fcs_port_uf_recv(&fabric->bport, fchs, len);
+		return;
+	}
+
+	/**
+	 * look for a matching local port ID
+	 */
+	list_for_each(qe, &fabric->vport_q) {
+		vport = (struct bfa_fcs_vport_s *)qe;
+		if (vport->lport.pid == pid) {
+			bfa_fcs_port_uf_recv(&vport->lport, fchs, len);
+			return;
+		}
+	}
+	bfa_trc(fabric->fcs, els_cmd->els_code);
+	bfa_fcs_port_uf_recv(&fabric->bport, fchs, len);
+}
+
+/**
+ * 		Unsolicited frames to be processed by fabric.
+ */
+static void
+bfa_fcs_fabric_process_uf(struct bfa_fcs_fabric_s *fabric, struct fchs_s *fchs,
+			  u16 len)
+{
+	struct fc_els_cmd_s   *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+	bfa_trc(fabric->fcs, els_cmd->els_code);
+
+	switch (els_cmd->els_code) {
+	case FC_ELS_FLOGI:
+		bfa_fcs_fabric_process_flogi(fabric, fchs, len);
+		break;
+
+	default:
+		/*
+		 * need to generate a LS_RJT
+		 */
+		break;
+	}
+}
+
+/**
+ * 	Process	incoming FLOGI
+ */
+static void
+bfa_fcs_fabric_process_flogi(struct bfa_fcs_fabric_s *fabric,
+			struct fchs_s *fchs, u16 len)
+{
+	struct fc_logi_s     *flogi = (struct fc_logi_s *) (fchs + 1);
+	struct bfa_fcs_port_s *bport = &fabric->bport;
+
+	bfa_trc(fabric->fcs, fchs->s_id);
+
+	fabric->stats.flogi_rcvd++;
+	/*
+	 * Check port type. It should be 0 = n-port.
+	 */
+	if (flogi->csp.port_type) {
+		/*
+		 * @todo: may need to send a LS_RJT
+		 */
+		bfa_trc(fabric->fcs, flogi->port_name);
+		fabric->stats.flogi_rejected++;
+		return;
+	}
+
+	fabric->bb_credit = bfa_os_ntohs(flogi->csp.bbcred);
+	bport->port_topo.pn2n.rem_port_wwn = flogi->port_name;
+	bport->port_topo.pn2n.reply_oxid = fchs->ox_id;
+
+	/*
+	 * Send a Flogi Acc
+	 */
+	bfa_fcs_fabric_send_flogi_acc(fabric);
+	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_NO_FABRIC);
+}
+
+static void
+bfa_fcs_fabric_send_flogi_acc(struct bfa_fcs_fabric_s *fabric)
+{
+	struct bfa_port_cfg_s *pcfg = &fabric->bport.port_cfg;
+	struct bfa_fcs_port_n2n_s *n2n_port = &fabric->bport.port_topo.pn2n;
+	struct bfa_s   *bfa = fabric->fcs->bfa;
+	struct bfa_fcxp_s *fcxp;
+	u16        reqlen;
+	struct fchs_s          fchs;
+
+	fcxp = bfa_fcs_fcxp_alloc(fabric->fcs);
+	/**
+	 * Do not expect this failure -- expect remote node to retry
+	 */
+	if (!fcxp)
+		return;
+
+	reqlen = fc_flogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+				    bfa_os_hton3b(FC_FABRIC_PORT),
+				    n2n_port->reply_oxid, pcfg->pwwn,
+				    pcfg->nwwn, bfa_pport_get_maxfrsize(bfa),
+				    bfa_pport_get_rx_bbcredit(bfa));
+
+	bfa_fcxp_send(fcxp, NULL, fabric->vf_id, bfa_lps_get_tag(fabric->lps),
+			BFA_FALSE, FC_CLASS_3, reqlen, &fchs,
+			bfa_fcs_fabric_flogiacc_comp, fabric,
+			FC_MAX_PDUSZ, 0); /* Timeout 0 indicates no
+					   * response expected
+					   */
+}
+
+/**
+ *   Flogi Acc completion callback.
+ */
+static void
+bfa_fcs_fabric_flogiacc_comp(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+			     bfa_status_t status, u32 rsp_len,
+			     u32 resid_len, struct fchs_s *rspfchs)
+{
+	struct bfa_fcs_fabric_s *fabric = cbarg;
+
+	bfa_trc(fabric->fcs, status);
+}
+
+/*
+ *
+ * @param[in] fabric - fabric
+ * @param[in] result - 1
+ *
+ * @return - none
+ */
+void
+bfa_fcs_auth_finished(struct bfa_fcs_fabric_s *fabric, enum auth_status status)
+{
+	bfa_trc(fabric->fcs, status);
+
+	if (status == FC_AUTH_STATE_SUCCESS)
+		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_AUTH_SUCCESS);
+	else
+		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_AUTH_FAILED);
+}
+
+/**
+ * Send AEN notification
+ */
+static void
+bfa_fcs_fabric_aen_post(struct bfa_fcs_port_s *port,
+			enum bfa_port_aen_event event)
+{
+	union bfa_aen_data_u aen_data;
+	struct bfa_log_mod_s *logmod = port->fcs->logm;
+	wwn_t           pwwn = bfa_fcs_port_get_pwwn(port);
+	wwn_t           fwwn = bfa_fcs_port_get_fabric_name(port);
+	char            pwwn_ptr[BFA_STRING_32];
+	char            fwwn_ptr[BFA_STRING_32];
+
+	wwn2str(pwwn_ptr, pwwn);
+	wwn2str(fwwn_ptr, fwwn);
+
+	switch (event) {
+	case BFA_PORT_AEN_FABRIC_NAME_CHANGE:
+		bfa_log(logmod, BFA_AEN_PORT_FABRIC_NAME_CHANGE, pwwn_ptr,
+			fwwn_ptr);
+		break;
+	default:
+		break;
+	}
+
+	aen_data.port.pwwn = pwwn;
+	aen_data.port.fwwn = fwwn;
+}
+
+/*
+ *
+ * @param[in] fabric - fabric
+ * @param[in] wwn_t - new fabric name
+ *
+ * @return - none
+ */
+void
+bfa_fcs_fabric_set_fabric_name(struct bfa_fcs_fabric_s *fabric,
+			       wwn_t fabric_name)
+{
+	bfa_trc(fabric->fcs, fabric_name);
+
+	if (fabric->fabric_name == 0) {
+		/*
+		 * With BRCD switches, we don't get Fabric Name in FLOGI.
+		 * Don't generate a fabric name change event in this case.
+		 */
+		fabric->fabric_name = fabric_name;
+	} else {
+		fabric->fabric_name = fabric_name;
+		/*
+		 * Generate a Event
+		 */
+		bfa_fcs_fabric_aen_post(&fabric->bport,
+					BFA_PORT_AEN_FABRIC_NAME_CHANGE);
+	}
+
+}
+
+/**
+ * Not used by FCS.
+ */
+void
+bfa_cb_lps_flogo_comp(void *bfad, void *uarg)
+{
+}
+
+
diff --git a/drivers/scsi/bfa/fcbuild.c b/drivers/scsi/bfa/fcbuild.c
new file mode 100644
index 000000000000..d174706b9caa
--- /dev/null
+++ b/drivers/scsi/bfa/fcbuild.c
@@ -0,0 +1,1449 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * fcbuild.c - FC link service frame building and parsing routines
+ */
+
+#include <bfa_os_inc.h>
+#include "fcbuild.h"
+
+/*
+ * static build functions
+ */
+static void fc_els_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id);
+static void fc_bls_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id);
+static struct fchs_s   fc_els_req_tmpl;
+static struct fchs_s   fc_els_rsp_tmpl;
+static struct fchs_s   fc_bls_req_tmpl;
+static struct fchs_s   fc_bls_rsp_tmpl;
+static struct fc_ba_acc_s ba_acc_tmpl;
+static struct fc_logi_s plogi_tmpl;
+static struct fc_prli_s prli_tmpl;
+static struct fc_rrq_s rrq_tmpl;
+static struct fchs_s   fcp_fchs_tmpl;
+
+void
+fcbuild_init(void)
+{
+	/*
+	 * fc_els_req_tmpl
+	 */
+	fc_els_req_tmpl.routing = FC_RTG_EXT_LINK;
+	fc_els_req_tmpl.cat_info = FC_CAT_LD_REQUEST;
+	fc_els_req_tmpl.type = FC_TYPE_ELS;
+	fc_els_req_tmpl.f_ctl =
+		bfa_os_hton3b(FCTL_SEQ_INI | FCTL_FS_EXCH | FCTL_END_SEQ |
+			      FCTL_SI_XFER);
+	fc_els_req_tmpl.rx_id = FC_RXID_ANY;
+
+	/*
+	 * fc_els_rsp_tmpl
+	 */
+	fc_els_rsp_tmpl.routing = FC_RTG_EXT_LINK;
+	fc_els_rsp_tmpl.cat_info = FC_CAT_LD_REPLY;
+	fc_els_rsp_tmpl.type = FC_TYPE_ELS;
+	fc_els_rsp_tmpl.f_ctl =
+		bfa_os_hton3b(FCTL_EC_RESP | FCTL_SEQ_INI | FCTL_LS_EXCH |
+			      FCTL_END_SEQ | FCTL_SI_XFER);
+	fc_els_rsp_tmpl.rx_id = FC_RXID_ANY;
+
+	/*
+	 * fc_bls_req_tmpl
+	 */
+	fc_bls_req_tmpl.routing = FC_RTG_BASIC_LINK;
+	fc_bls_req_tmpl.type = FC_TYPE_BLS;
+	fc_bls_req_tmpl.f_ctl = bfa_os_hton3b(FCTL_END_SEQ | FCTL_SI_XFER);
+	fc_bls_req_tmpl.rx_id = FC_RXID_ANY;
+
+	/*
+	 * fc_bls_rsp_tmpl
+	 */
+	fc_bls_rsp_tmpl.routing = FC_RTG_BASIC_LINK;
+	fc_bls_rsp_tmpl.cat_info = FC_CAT_BA_ACC;
+	fc_bls_rsp_tmpl.type = FC_TYPE_BLS;
+	fc_bls_rsp_tmpl.f_ctl =
+		bfa_os_hton3b(FCTL_EC_RESP | FCTL_SEQ_INI | FCTL_LS_EXCH |
+			      FCTL_END_SEQ | FCTL_SI_XFER);
+	fc_bls_rsp_tmpl.rx_id = FC_RXID_ANY;
+
+	/*
+	 * ba_acc_tmpl
+	 */
+	ba_acc_tmpl.seq_id_valid = 0;
+	ba_acc_tmpl.low_seq_cnt = 0;
+	ba_acc_tmpl.high_seq_cnt = 0xFFFF;
+
+	/*
+	 * plogi_tmpl
+	 */
+	plogi_tmpl.csp.verhi = FC_PH_VER_PH_3;
+	plogi_tmpl.csp.verlo = FC_PH_VER_4_3;
+	plogi_tmpl.csp.bbcred = bfa_os_htons(0x0004);
+	plogi_tmpl.csp.ciro = 0x1;
+	plogi_tmpl.csp.cisc = 0x0;
+	plogi_tmpl.csp.altbbcred = 0x0;
+	plogi_tmpl.csp.conseq = bfa_os_htons(0x00FF);
+	plogi_tmpl.csp.ro_bitmap = bfa_os_htons(0x0002);
+	plogi_tmpl.csp.e_d_tov = bfa_os_htonl(2000);
+
+	plogi_tmpl.class3.class_valid = 1;
+	plogi_tmpl.class3.sequential = 1;
+	plogi_tmpl.class3.conseq = 0xFF;
+	plogi_tmpl.class3.ospx = 1;
+
+	/*
+	 * prli_tmpl
+	 */
+	prli_tmpl.command = FC_ELS_PRLI;
+	prli_tmpl.pglen = 0x10;
+	prli_tmpl.pagebytes = bfa_os_htons(0x0014);
+	prli_tmpl.parampage.type = FC_TYPE_FCP;
+	prli_tmpl.parampage.imagepair = 1;
+	prli_tmpl.parampage.servparams.rxrdisab = 1;
+
+	/*
+	 * rrq_tmpl
+	 */
+	rrq_tmpl.els_cmd.els_code = FC_ELS_RRQ;
+
+	/*
+	 * fcp_fchs_tmpl
+	 */
+	fcp_fchs_tmpl.routing = FC_RTG_FC4_DEV_DATA;
+	fcp_fchs_tmpl.cat_info = FC_CAT_UNSOLICIT_CMD;
+	fcp_fchs_tmpl.type = FC_TYPE_FCP;
+	fcp_fchs_tmpl.f_ctl =
+		bfa_os_hton3b(FCTL_FS_EXCH | FCTL_END_SEQ | FCTL_SI_XFER);
+	fcp_fchs_tmpl.seq_id = 1;
+	fcp_fchs_tmpl.rx_id = FC_RXID_ANY;
+}
+
+static void
+fc_gs_fchdr_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u32 ox_id)
+{
+	bfa_os_memset(fchs, 0, sizeof(struct fchs_s));
+
+	fchs->routing = FC_RTG_FC4_DEV_DATA;
+	fchs->cat_info = FC_CAT_UNSOLICIT_CTRL;
+	fchs->type = FC_TYPE_SERVICES;
+	fchs->f_ctl =
+		bfa_os_hton3b(FCTL_SEQ_INI | FCTL_FS_EXCH | FCTL_END_SEQ |
+			      FCTL_SI_XFER);
+	fchs->rx_id = FC_RXID_ANY;
+	fchs->d_id = (d_id);
+	fchs->s_id = (s_id);
+	fchs->ox_id = bfa_os_htons(ox_id);
+
+	/**
+	 * @todo no need to set ox_id for request
+	 *       no need to set rx_id for response
+	 */
+}
+
+void
+fc_els_req_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id)
+{
+	bfa_os_memcpy(fchs, &fc_els_req_tmpl, sizeof(struct fchs_s));
+	fchs->d_id = (d_id);
+	fchs->s_id = (s_id);
+	fchs->ox_id = bfa_os_htons(ox_id);
+}
+
+static void
+fc_els_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id)
+{
+	bfa_os_memcpy(fchs, &fc_els_rsp_tmpl, sizeof(struct fchs_s));
+	fchs->d_id = d_id;
+	fchs->s_id = s_id;
+	fchs->ox_id = ox_id;
+}
+
+enum fc_parse_status
+fc_els_rsp_parse(struct fchs_s *fchs, int len)
+{
+	struct fc_els_cmd_s   *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+	struct fc_ls_rjt_s    *ls_rjt = (struct fc_ls_rjt_s *) els_cmd;
+
+	len = len;
+
+	switch (els_cmd->els_code) {
+	case FC_ELS_LS_RJT:
+		if (ls_rjt->reason_code == FC_LS_RJT_RSN_LOGICAL_BUSY)
+			return (FC_PARSE_BUSY);
+		else
+			return (FC_PARSE_FAILURE);
+
+	case FC_ELS_ACC:
+		return (FC_PARSE_OK);
+	}
+	return (FC_PARSE_OK);
+}
+
+static void
+fc_bls_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id)
+{
+	bfa_os_memcpy(fchs, &fc_bls_rsp_tmpl, sizeof(struct fchs_s));
+	fchs->d_id = d_id;
+	fchs->s_id = s_id;
+	fchs->ox_id = ox_id;
+}
+
+static          u16
+fc_plogi_x_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+		 u16 ox_id, wwn_t port_name, wwn_t node_name,
+		 u16 pdu_size, u8 els_code)
+{
+	struct fc_logi_s     *plogi = (struct fc_logi_s *) (pld);
+
+	bfa_os_memcpy(plogi, &plogi_tmpl, sizeof(struct fc_logi_s));
+
+	plogi->els_cmd.els_code = els_code;
+	if (els_code == FC_ELS_PLOGI)
+		fc_els_req_build(fchs, d_id, s_id, ox_id);
+	else
+		fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+	plogi->csp.rxsz = plogi->class3.rxsz = bfa_os_htons(pdu_size);
+
+	bfa_os_memcpy(&plogi->port_name, &port_name, sizeof(wwn_t));
+	bfa_os_memcpy(&plogi->node_name, &node_name, sizeof(wwn_t));
+
+	return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_flogi_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
+		u16 ox_id, wwn_t port_name, wwn_t node_name,
+		u16 pdu_size, u8 set_npiv, u8 set_auth,
+		u16 local_bb_credits)
+{
+	u32        d_id = bfa_os_hton3b(FC_FABRIC_PORT);
+	u32 	*vvl_info;
+
+	bfa_os_memcpy(flogi, &plogi_tmpl, sizeof(struct fc_logi_s));
+
+	flogi->els_cmd.els_code = FC_ELS_FLOGI;
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+	flogi->csp.rxsz = flogi->class3.rxsz = bfa_os_htons(pdu_size);
+	flogi->port_name = port_name;
+	flogi->node_name = node_name;
+
+	/*
+	 * Set the NPIV Capability Bit ( word 1, bit 31) of Common
+	 * Service Parameters.
+	 */
+	flogi->csp.ciro = set_npiv;
+
+	/* set AUTH capability */
+	flogi->csp.security = set_auth;
+
+	flogi->csp.bbcred = bfa_os_htons(local_bb_credits);
+
+	/* Set brcd token in VVL */
+	vvl_info = (u32 *)&flogi->vvl[0];
+
+	/* set the flag to indicate the presence of VVL */
+	flogi->csp.npiv_supp    = 1; /* @todo. field name is not correct */
+	vvl_info[0]	= bfa_os_htonl(FLOGI_VVL_BRCD);
+
+	return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_flogi_acc_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
+		   u16 ox_id, wwn_t port_name, wwn_t node_name,
+		   u16 pdu_size, u16 local_bb_credits)
+{
+	u32        d_id = 0;
+
+	bfa_os_memcpy(flogi, &plogi_tmpl, sizeof(struct fc_logi_s));
+	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+	flogi->els_cmd.els_code = FC_ELS_ACC;
+	flogi->csp.rxsz = flogi->class3.rxsz = bfa_os_htons(pdu_size);
+	flogi->port_name = port_name;
+	flogi->node_name = node_name;
+
+	flogi->csp.bbcred = bfa_os_htons(local_bb_credits);
+
+	return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_fdisc_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
+		u16 ox_id, wwn_t port_name, wwn_t node_name,
+		u16 pdu_size)
+{
+	u32        d_id = bfa_os_hton3b(FC_FABRIC_PORT);
+
+	bfa_os_memcpy(flogi, &plogi_tmpl, sizeof(struct fc_logi_s));
+
+	flogi->els_cmd.els_code = FC_ELS_FDISC;
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+	flogi->csp.rxsz = flogi->class3.rxsz = bfa_os_htons(pdu_size);
+	flogi->port_name = port_name;
+	flogi->node_name = node_name;
+
+	return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_plogi_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+	       u16 ox_id, wwn_t port_name, wwn_t node_name,
+	       u16 pdu_size)
+{
+	return fc_plogi_x_build(fchs, pld, d_id, s_id, ox_id, port_name,
+				node_name, pdu_size, FC_ELS_PLOGI);
+}
+
+u16
+fc_plogi_acc_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+		   u16 ox_id, wwn_t port_name, wwn_t node_name,
+		   u16 pdu_size)
+{
+	return fc_plogi_x_build(fchs, pld, d_id, s_id, ox_id, port_name,
+				node_name, pdu_size, FC_ELS_ACC);
+}
+
+enum fc_parse_status
+fc_plogi_rsp_parse(struct fchs_s *fchs, int len, wwn_t port_name)
+{
+	struct fc_els_cmd_s   *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+	struct fc_logi_s     *plogi;
+	struct fc_ls_rjt_s    *ls_rjt;
+
+	switch (els_cmd->els_code) {
+	case FC_ELS_LS_RJT:
+		ls_rjt = (struct fc_ls_rjt_s *) (fchs + 1);
+		if (ls_rjt->reason_code == FC_LS_RJT_RSN_LOGICAL_BUSY)
+			return (FC_PARSE_BUSY);
+		else
+			return (FC_PARSE_FAILURE);
+	case FC_ELS_ACC:
+		plogi = (struct fc_logi_s *) (fchs + 1);
+		if (len < sizeof(struct fc_logi_s))
+			return (FC_PARSE_FAILURE);
+
+		if (!wwn_is_equal(plogi->port_name, port_name))
+			return (FC_PARSE_FAILURE);
+
+		if (!plogi->class3.class_valid)
+			return (FC_PARSE_FAILURE);
+
+		if (bfa_os_ntohs(plogi->class3.rxsz) < (FC_MIN_PDUSZ))
+			return (FC_PARSE_FAILURE);
+
+		return (FC_PARSE_OK);
+	default:
+		return (FC_PARSE_FAILURE);
+	}
+}
+
+enum fc_parse_status
+fc_plogi_parse(struct fchs_s *fchs)
+{
+	struct fc_logi_s     *plogi = (struct fc_logi_s *) (fchs + 1);
+
+	if (plogi->class3.class_valid != 1)
+		return FC_PARSE_FAILURE;
+
+	if ((bfa_os_ntohs(plogi->class3.rxsz) < FC_MIN_PDUSZ)
+	    || (bfa_os_ntohs(plogi->class3.rxsz) > FC_MAX_PDUSZ)
+	    || (plogi->class3.rxsz == 0))
+		return (FC_PARSE_FAILURE);
+
+	return FC_PARSE_OK;
+}
+
+u16
+fc_prli_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+	      u16 ox_id)
+{
+	struct fc_prli_s      *prli = (struct fc_prli_s *) (pld);
+
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+	bfa_os_memcpy(prli, &prli_tmpl, sizeof(struct fc_prli_s));
+
+	prli->command = FC_ELS_PRLI;
+	prli->parampage.servparams.initiator     = 1;
+	prli->parampage.servparams.retry         = 1;
+	prli->parampage.servparams.rec_support   = 1;
+	prli->parampage.servparams.task_retry_id = 0;
+	prli->parampage.servparams.confirm       = 1;
+
+	return (sizeof(struct fc_prli_s));
+}
+
+u16
+fc_prli_acc_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+		  u16 ox_id, enum bfa_port_role role)
+{
+	struct fc_prli_s      *prli = (struct fc_prli_s *) (pld);
+
+	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+	bfa_os_memcpy(prli, &prli_tmpl, sizeof(struct fc_prli_s));
+
+	prli->command = FC_ELS_ACC;
+
+	if ((role & BFA_PORT_ROLE_FCP_TM) == BFA_PORT_ROLE_FCP_TM)
+		prli->parampage.servparams.target = 1;
+	else
+		prli->parampage.servparams.initiator = 1;
+
+	prli->parampage.rspcode = FC_PRLI_ACC_XQTD;
+
+	return (sizeof(struct fc_prli_s));
+}
+
+enum fc_parse_status
+fc_prli_rsp_parse(struct fc_prli_s *prli, int len)
+{
+	if (len < sizeof(struct fc_prli_s))
+		return (FC_PARSE_FAILURE);
+
+	if (prli->command != FC_ELS_ACC)
+		return (FC_PARSE_FAILURE);
+
+	if ((prli->parampage.rspcode != FC_PRLI_ACC_XQTD)
+	    && (prli->parampage.rspcode != FC_PRLI_ACC_PREDEF_IMG))
+		return (FC_PARSE_FAILURE);
+
+	if (prli->parampage.servparams.target != 1)
+		return (FC_PARSE_FAILURE);
+
+	return (FC_PARSE_OK);
+}
+
+enum fc_parse_status
+fc_prli_parse(struct fc_prli_s *prli)
+{
+	if (prli->parampage.type != FC_TYPE_FCP)
+		return (FC_PARSE_FAILURE);
+
+	if (!prli->parampage.imagepair)
+		return (FC_PARSE_FAILURE);
+
+	if (!prli->parampage.servparams.initiator)
+		return (FC_PARSE_FAILURE);
+
+	return (FC_PARSE_OK);
+}
+
+u16
+fc_logo_build(struct fchs_s *fchs, struct fc_logo_s *logo, u32 d_id,
+			u32 s_id, u16 ox_id, wwn_t port_name)
+{
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+	memset(logo, '\0', sizeof(struct fc_logo_s));
+	logo->els_cmd.els_code = FC_ELS_LOGO;
+	logo->nport_id = (s_id);
+	logo->orig_port_name = port_name;
+
+	return (sizeof(struct fc_logo_s));
+}
+
+static          u16
+fc_adisc_x_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
+		 u32 s_id, u16 ox_id, wwn_t port_name,
+		 wwn_t node_name, u8 els_code)
+{
+	memset(adisc, '\0', sizeof(struct fc_adisc_s));
+
+	adisc->els_cmd.els_code = els_code;
+
+	if (els_code == FC_ELS_ADISC)
+		fc_els_req_build(fchs, d_id, s_id, ox_id);
+	else
+		fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+	adisc->orig_HA = 0;
+	adisc->orig_port_name = port_name;
+	adisc->orig_node_name = node_name;
+	adisc->nport_id = (s_id);
+
+	return (sizeof(struct fc_adisc_s));
+}
+
+u16
+fc_adisc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
+		u32 s_id, u16 ox_id, wwn_t port_name,
+		wwn_t node_name)
+{
+	return fc_adisc_x_build(fchs, adisc, d_id, s_id, ox_id, port_name,
+				node_name, FC_ELS_ADISC);
+}
+
+u16
+fc_adisc_acc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
+		   u32 s_id, u16 ox_id, wwn_t port_name,
+		   wwn_t node_name)
+{
+	return fc_adisc_x_build(fchs, adisc, d_id, s_id, ox_id, port_name,
+				node_name, FC_ELS_ACC);
+}
+
+enum fc_parse_status
+fc_adisc_rsp_parse(struct fc_adisc_s *adisc, int len, wwn_t port_name,
+				 wwn_t node_name)
+{
+
+	if (len < sizeof(struct fc_adisc_s))
+		return (FC_PARSE_FAILURE);
+
+	if (adisc->els_cmd.els_code != FC_ELS_ACC)
+		return (FC_PARSE_FAILURE);
+
+	if (!wwn_is_equal(adisc->orig_port_name, port_name))
+		return (FC_PARSE_FAILURE);
+
+	return (FC_PARSE_OK);
+}
+
+enum fc_parse_status
+fc_adisc_parse(struct fchs_s *fchs, void *pld, u32 host_dap,
+		 wwn_t node_name, wwn_t port_name)
+{
+	struct fc_adisc_s     *adisc = (struct fc_adisc_s *) pld;
+
+	if (adisc->els_cmd.els_code != FC_ELS_ACC)
+		return (FC_PARSE_FAILURE);
+
+	if ((adisc->nport_id == (host_dap))
+	    && wwn_is_equal(adisc->orig_port_name, port_name)
+	    && wwn_is_equal(adisc->orig_node_name, node_name))
+		return (FC_PARSE_OK);
+
+	return (FC_PARSE_FAILURE);
+}
+
+enum fc_parse_status
+fc_pdisc_parse(struct fchs_s *fchs, wwn_t node_name, wwn_t port_name)
+{
+	struct fc_logi_s     *pdisc = (struct fc_logi_s *) (fchs + 1);
+
+	if (pdisc->class3.class_valid != 1)
+		return FC_PARSE_FAILURE;
+
+	if ((bfa_os_ntohs(pdisc->class3.rxsz) <
+		 (FC_MIN_PDUSZ - sizeof(struct fchs_s)))
+	    || (pdisc->class3.rxsz == 0))
+		return (FC_PARSE_FAILURE);
+
+	if (!wwn_is_equal(pdisc->port_name, port_name))
+		return (FC_PARSE_FAILURE);
+
+	if (!wwn_is_equal(pdisc->node_name, node_name))
+		return (FC_PARSE_FAILURE);
+
+	return FC_PARSE_OK;
+}
+
+u16
+fc_abts_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id)
+{
+	bfa_os_memcpy(fchs, &fc_bls_req_tmpl, sizeof(struct fchs_s));
+	fchs->cat_info = FC_CAT_ABTS;
+	fchs->d_id = (d_id);
+	fchs->s_id = (s_id);
+	fchs->ox_id = bfa_os_htons(ox_id);
+
+	return (sizeof(struct fchs_s));
+}
+
+enum fc_parse_status
+fc_abts_rsp_parse(struct fchs_s *fchs, int len)
+{
+	if ((fchs->cat_info == FC_CAT_BA_ACC)
+	    || (fchs->cat_info == FC_CAT_BA_RJT))
+		return (FC_PARSE_OK);
+
+	return (FC_PARSE_FAILURE);
+}
+
+u16
+fc_rrq_build(struct fchs_s *fchs, struct fc_rrq_s *rrq, u32 d_id,
+			 u32 s_id, u16 ox_id, u16 rrq_oxid)
+{
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+	/*
+	 * build rrq payload
+	 */
+	bfa_os_memcpy(rrq, &rrq_tmpl, sizeof(struct fc_rrq_s));
+	rrq->s_id = (s_id);
+	rrq->ox_id = bfa_os_htons(rrq_oxid);
+	rrq->rx_id = FC_RXID_ANY;
+
+	return (sizeof(struct fc_rrq_s));
+}
+
+u16
+fc_logo_acc_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+		  u16 ox_id)
+{
+	struct fc_els_cmd_s   *acc = pld;
+
+	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+	memset(acc, 0, sizeof(struct fc_els_cmd_s));
+	acc->els_code = FC_ELS_ACC;
+
+	return (sizeof(struct fc_els_cmd_s));
+}
+
+u16
+fc_ls_rjt_build(struct fchs_s *fchs, struct fc_ls_rjt_s *ls_rjt, u32 d_id,
+		u32 s_id, u16 ox_id, u8 reason_code,
+		u8 reason_code_expl)
+{
+	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+	memset(ls_rjt, 0, sizeof(struct fc_ls_rjt_s));
+
+	ls_rjt->els_cmd.els_code = FC_ELS_LS_RJT;
+	ls_rjt->reason_code = reason_code;
+	ls_rjt->reason_code_expl = reason_code_expl;
+	ls_rjt->vendor_unique = 0x00;
+
+	return (sizeof(struct fc_ls_rjt_s));
+}
+
+u16
+fc_ba_acc_build(struct fchs_s *fchs, struct fc_ba_acc_s *ba_acc, u32 d_id,
+		u32 s_id, u16 ox_id, u16 rx_id)
+{
+	fc_bls_rsp_build(fchs, d_id, s_id, ox_id);
+
+	bfa_os_memcpy(ba_acc, &ba_acc_tmpl, sizeof(struct fc_ba_acc_s));
+
+	fchs->rx_id = rx_id;
+
+	ba_acc->ox_id = fchs->ox_id;
+	ba_acc->rx_id = fchs->rx_id;
+
+	return (sizeof(struct fc_ba_acc_s));
+}
+
+u16
+fc_ls_acc_build(struct fchs_s *fchs, struct fc_els_cmd_s *els_cmd,
+			u32 d_id, u32 s_id, u16 ox_id)
+{
+	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+	memset(els_cmd, 0, sizeof(struct fc_els_cmd_s));
+	els_cmd->els_code = FC_ELS_ACC;
+
+	return (sizeof(struct fc_els_cmd_s));
+}
+
+int
+fc_logout_params_pages(struct fchs_s *fc_frame, u8 els_code)
+{
+	int             num_pages = 0;
+	struct fc_prlo_s      *prlo;
+	struct fc_tprlo_s     *tprlo;
+
+	if (els_code == FC_ELS_PRLO) {
+		prlo = (struct fc_prlo_s *) (fc_frame + 1);
+		num_pages = (bfa_os_ntohs(prlo->payload_len) - 4) / 16;
+	} else {
+		tprlo = (struct fc_tprlo_s *) (fc_frame + 1);
+		num_pages = (bfa_os_ntohs(tprlo->payload_len) - 4) / 16;
+	}
+	return num_pages;
+}
+
+u16
+fc_tprlo_acc_build(struct fchs_s *fchs, struct fc_tprlo_acc_s *tprlo_acc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			int num_pages)
+{
+	int             page;
+
+	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+	memset(tprlo_acc, 0, (num_pages * 16) + 4);
+	tprlo_acc->command = FC_ELS_ACC;
+
+	tprlo_acc->page_len = 0x10;
+	tprlo_acc->payload_len = bfa_os_htons((num_pages * 16) + 4);
+
+	for (page = 0; page < num_pages; page++) {
+		tprlo_acc->tprlo_acc_params[page].opa_valid = 0;
+		tprlo_acc->tprlo_acc_params[page].rpa_valid = 0;
+		tprlo_acc->tprlo_acc_params[page].fc4type_csp = FC_TYPE_FCP;
+		tprlo_acc->tprlo_acc_params[page].orig_process_assc = 0;
+		tprlo_acc->tprlo_acc_params[page].resp_process_assc = 0;
+	}
+	return (bfa_os_ntohs(tprlo_acc->payload_len));
+}
+
+u16
+fc_prlo_acc_build(struct fchs_s *fchs, struct fc_prlo_acc_s *prlo_acc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			int num_pages)
+{
+	int             page;
+
+	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+	memset(prlo_acc, 0, (num_pages * 16) + 4);
+	prlo_acc->command = FC_ELS_ACC;
+	prlo_acc->page_len = 0x10;
+	prlo_acc->payload_len = bfa_os_htons((num_pages * 16) + 4);
+
+	for (page = 0; page < num_pages; page++) {
+		prlo_acc->prlo_acc_params[page].opa_valid = 0;
+		prlo_acc->prlo_acc_params[page].rpa_valid = 0;
+		prlo_acc->prlo_acc_params[page].fc4type_csp = FC_TYPE_FCP;
+		prlo_acc->prlo_acc_params[page].orig_process_assc = 0;
+		prlo_acc->prlo_acc_params[page].resp_process_assc = 0;
+	}
+
+	return (bfa_os_ntohs(prlo_acc->payload_len));
+}
+
+u16
+fc_rnid_build(struct fchs_s *fchs, struct fc_rnid_cmd_s *rnid, u32 d_id,
+			u32 s_id, u16 ox_id, u32 data_format)
+{
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+	memset(rnid, 0, sizeof(struct fc_rnid_cmd_s));
+
+	rnid->els_cmd.els_code = FC_ELS_RNID;
+	rnid->node_id_data_format = data_format;
+
+	return (sizeof(struct fc_rnid_cmd_s));
+}
+
+u16
+fc_rnid_acc_build(struct fchs_s *fchs, struct fc_rnid_acc_s *rnid_acc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			u32 data_format,
+			struct fc_rnid_common_id_data_s *common_id_data,
+			struct fc_rnid_general_topology_data_s *gen_topo_data)
+{
+	memset(rnid_acc, 0, sizeof(struct fc_rnid_acc_s));
+
+	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+	rnid_acc->els_cmd.els_code = FC_ELS_ACC;
+	rnid_acc->node_id_data_format = data_format;
+	rnid_acc->common_id_data_length =
+			sizeof(struct fc_rnid_common_id_data_s);
+	rnid_acc->common_id_data = *common_id_data;
+
+	if (data_format == RNID_NODEID_DATA_FORMAT_DISCOVERY) {
+		rnid_acc->specific_id_data_length =
+			sizeof(struct fc_rnid_general_topology_data_s);
+		bfa_os_assign(rnid_acc->gen_topology_data, *gen_topo_data);
+		return (sizeof(struct fc_rnid_acc_s));
+	} else {
+		return (sizeof(struct fc_rnid_acc_s) -
+			sizeof(struct fc_rnid_general_topology_data_s));
+	}
+
+}
+
+u16
+fc_rpsc_build(struct fchs_s *fchs, struct fc_rpsc_cmd_s *rpsc, u32 d_id,
+			u32 s_id, u16 ox_id)
+{
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+	memset(rpsc, 0, sizeof(struct fc_rpsc_cmd_s));
+
+	rpsc->els_cmd.els_code = FC_ELS_RPSC;
+	return (sizeof(struct fc_rpsc_cmd_s));
+}
+
+u16
+fc_rpsc2_build(struct fchs_s *fchs, struct fc_rpsc2_cmd_s *rpsc2,
+			u32 d_id, u32 s_id, u32 *pid_list,
+			u16 npids)
+{
+	u32 dctlr_id = FC_DOMAIN_CTRLR(bfa_os_hton3b(d_id));
+	int i = 0;
+
+	fc_els_req_build(fchs, bfa_os_hton3b(dctlr_id), s_id, 0);
+
+	memset(rpsc2, 0, sizeof(struct fc_rpsc2_cmd_s));
+
+	rpsc2->els_cmd.els_code = FC_ELS_RPSC;
+	rpsc2->token = bfa_os_htonl(FC_BRCD_TOKEN);
+	rpsc2->num_pids  = bfa_os_htons(npids);
+	for (i = 0; i < npids; i++)
+		rpsc2->pid_list[i].pid = pid_list[i];
+
+	return (sizeof(struct fc_rpsc2_cmd_s) + ((npids - 1) *
+			(sizeof(u32))));
+}
+
+u16
+fc_rpsc_acc_build(struct fchs_s *fchs, struct fc_rpsc_acc_s *rpsc_acc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			struct fc_rpsc_speed_info_s *oper_speed)
+{
+	memset(rpsc_acc, 0, sizeof(struct fc_rpsc_acc_s));
+
+	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+	rpsc_acc->command = FC_ELS_ACC;
+	rpsc_acc->num_entries = bfa_os_htons(1);
+
+	rpsc_acc->speed_info[0].port_speed_cap =
+		bfa_os_htons(oper_speed->port_speed_cap);
+
+	rpsc_acc->speed_info[0].port_op_speed =
+		bfa_os_htons(oper_speed->port_op_speed);
+
+	return (sizeof(struct fc_rpsc_acc_s));
+
+}
+
+/*
+ * TBD -
+ * . get rid of unnecessary memsets
+ */
+
+u16
+fc_logo_rsp_parse(struct fchs_s *fchs, int len)
+{
+	struct fc_els_cmd_s   *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+	len = len;
+	if (els_cmd->els_code != FC_ELS_ACC)
+		return FC_PARSE_FAILURE;
+
+	return FC_PARSE_OK;
+}
+
+u16
+fc_pdisc_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id, wwn_t port_name, wwn_t node_name,
+			u16 pdu_size)
+{
+	struct fc_logi_s     *pdisc = (struct fc_logi_s *) (fchs + 1);
+
+	bfa_os_memcpy(pdisc, &plogi_tmpl, sizeof(struct fc_logi_s));
+
+	pdisc->els_cmd.els_code = FC_ELS_PDISC;
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+	pdisc->csp.rxsz = pdisc->class3.rxsz = bfa_os_htons(pdu_size);
+	pdisc->port_name = port_name;
+	pdisc->node_name = node_name;
+
+	return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_pdisc_rsp_parse(struct fchs_s *fchs, int len, wwn_t port_name)
+{
+	struct fc_logi_s     *pdisc = (struct fc_logi_s *) (fchs + 1);
+
+	if (len < sizeof(struct fc_logi_s))
+		return (FC_PARSE_LEN_INVAL);
+
+	if (pdisc->els_cmd.els_code != FC_ELS_ACC)
+		return (FC_PARSE_ACC_INVAL);
+
+	if (!wwn_is_equal(pdisc->port_name, port_name))
+		return (FC_PARSE_PWWN_NOT_EQUAL);
+
+	if (!pdisc->class3.class_valid)
+		return (FC_PARSE_NWWN_NOT_EQUAL);
+
+	if (bfa_os_ntohs(pdisc->class3.rxsz) < (FC_MIN_PDUSZ))
+		return (FC_PARSE_RXSZ_INVAL);
+
+	return (FC_PARSE_OK);
+}
+
+u16
+fc_prlo_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id,
+	      int num_pages)
+{
+	struct fc_prlo_s      *prlo = (struct fc_prlo_s *) (fchs + 1);
+	int             page;
+
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+	memset(prlo, 0, (num_pages * 16) + 4);
+	prlo->command = FC_ELS_PRLO;
+	prlo->page_len = 0x10;
+	prlo->payload_len = bfa_os_htons((num_pages * 16) + 4);
+
+	for (page = 0; page < num_pages; page++) {
+		prlo->prlo_params[page].type = FC_TYPE_FCP;
+		prlo->prlo_params[page].opa_valid = 0;
+		prlo->prlo_params[page].rpa_valid = 0;
+		prlo->prlo_params[page].orig_process_assc = 0;
+		prlo->prlo_params[page].resp_process_assc = 0;
+	}
+
+	return (bfa_os_ntohs(prlo->payload_len));
+}
+
+u16
+fc_prlo_rsp_parse(struct fchs_s *fchs, int len)
+{
+	struct fc_prlo_acc_s  *prlo = (struct fc_prlo_acc_s *) (fchs + 1);
+	int             num_pages = 0;
+	int             page = 0;
+
+	len = len;
+
+	if (prlo->command != FC_ELS_ACC)
+		return (FC_PARSE_FAILURE);
+
+	num_pages = ((bfa_os_ntohs(prlo->payload_len)) - 4) / 16;
+
+	for (page = 0; page < num_pages; page++) {
+		if (prlo->prlo_acc_params[page].type != FC_TYPE_FCP)
+			return FC_PARSE_FAILURE;
+
+		if (prlo->prlo_acc_params[page].opa_valid != 0)
+			return FC_PARSE_FAILURE;
+
+		if (prlo->prlo_acc_params[page].rpa_valid != 0)
+			return FC_PARSE_FAILURE;
+
+		if (prlo->prlo_acc_params[page].orig_process_assc != 0)
+			return FC_PARSE_FAILURE;
+
+		if (prlo->prlo_acc_params[page].resp_process_assc != 0)
+			return FC_PARSE_FAILURE;
+	}
+	return (FC_PARSE_OK);
+
+}
+
+u16
+fc_tprlo_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id, int num_pages,
+			enum fc_tprlo_type tprlo_type, u32 tpr_id)
+{
+	struct fc_tprlo_s     *tprlo = (struct fc_tprlo_s *) (fchs + 1);
+	int             page;
+
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+	memset(tprlo, 0, (num_pages * 16) + 4);
+	tprlo->command = FC_ELS_TPRLO;
+	tprlo->page_len = 0x10;
+	tprlo->payload_len = bfa_os_htons((num_pages * 16) + 4);
+
+	for (page = 0; page < num_pages; page++) {
+		tprlo->tprlo_params[page].type = FC_TYPE_FCP;
+		tprlo->tprlo_params[page].opa_valid = 0;
+		tprlo->tprlo_params[page].rpa_valid = 0;
+		tprlo->tprlo_params[page].orig_process_assc = 0;
+		tprlo->tprlo_params[page].resp_process_assc = 0;
+		if (tprlo_type == FC_GLOBAL_LOGO) {
+			tprlo->tprlo_params[page].global_process_logout = 1;
+		} else if (tprlo_type == FC_TPR_LOGO) {
+			tprlo->tprlo_params[page].tpo_nport_valid = 1;
+			tprlo->tprlo_params[page].tpo_nport_id = (tpr_id);
+		}
+	}
+
+	return (bfa_os_ntohs(tprlo->payload_len));
+}
+
+u16
+fc_tprlo_rsp_parse(struct fchs_s *fchs, int len)
+{
+	struct fc_tprlo_acc_s *tprlo = (struct fc_tprlo_acc_s *) (fchs + 1);
+	int             num_pages = 0;
+	int             page = 0;
+
+	len = len;
+
+	if (tprlo->command != FC_ELS_ACC)
+		return (FC_PARSE_ACC_INVAL);
+
+	num_pages = (bfa_os_ntohs(tprlo->payload_len) - 4) / 16;
+
+	for (page = 0; page < num_pages; page++) {
+		if (tprlo->tprlo_acc_params[page].type != FC_TYPE_FCP)
+			return (FC_PARSE_NOT_FCP);
+		if (tprlo->tprlo_acc_params[page].opa_valid != 0)
+			return (FC_PARSE_OPAFLAG_INVAL);
+		if (tprlo->tprlo_acc_params[page].rpa_valid != 0)
+			return (FC_PARSE_RPAFLAG_INVAL);
+		if (tprlo->tprlo_acc_params[page].orig_process_assc != 0)
+			return (FC_PARSE_OPA_INVAL);
+		if (tprlo->tprlo_acc_params[page].resp_process_assc != 0)
+			return (FC_PARSE_RPA_INVAL);
+	}
+	return (FC_PARSE_OK);
+}
+
+enum fc_parse_status
+fc_rrq_rsp_parse(struct fchs_s *fchs, int len)
+{
+	struct fc_els_cmd_s   *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+	len = len;
+	if (els_cmd->els_code != FC_ELS_ACC)
+		return FC_PARSE_FAILURE;
+
+	return FC_PARSE_OK;
+}
+
+u16
+fc_ba_rjt_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id, u32 reason_code,
+			u32 reason_expl)
+{
+	struct fc_ba_rjt_s    *ba_rjt = (struct fc_ba_rjt_s *) (fchs + 1);
+
+	fc_bls_rsp_build(fchs, d_id, s_id, ox_id);
+
+	fchs->cat_info = FC_CAT_BA_RJT;
+	ba_rjt->reason_code = reason_code;
+	ba_rjt->reason_expl = reason_expl;
+	return (sizeof(struct fc_ba_rjt_s));
+}
+
+static void
+fc_gs_cthdr_build(struct ct_hdr_s *cthdr, u32 s_id, u16 cmd_code)
+{
+	bfa_os_memset(cthdr, 0, sizeof(struct ct_hdr_s));
+	cthdr->rev_id = CT_GS3_REVISION;
+	cthdr->gs_type = CT_GSTYPE_DIRSERVICE;
+	cthdr->gs_sub_type = CT_GSSUBTYPE_NAMESERVER;
+	cthdr->cmd_rsp_code = bfa_os_htons(cmd_code);
+}
+
+static void
+fc_gs_fdmi_cthdr_build(struct ct_hdr_s *cthdr, u32 s_id, u16 cmd_code)
+{
+	bfa_os_memset(cthdr, 0, sizeof(struct ct_hdr_s));
+	cthdr->rev_id = CT_GS3_REVISION;
+	cthdr->gs_type = CT_GSTYPE_MGMTSERVICE;
+	cthdr->gs_sub_type = CT_GSSUBTYPE_HBA_MGMTSERVER;
+	cthdr->cmd_rsp_code = bfa_os_htons(cmd_code);
+}
+
+static void
+fc_gs_ms_cthdr_build(struct ct_hdr_s *cthdr, u32 s_id, u16 cmd_code,
+					 u8 sub_type)
+{
+	bfa_os_memset(cthdr, 0, sizeof(struct ct_hdr_s));
+	cthdr->rev_id = CT_GS3_REVISION;
+	cthdr->gs_type = CT_GSTYPE_MGMTSERVICE;
+	cthdr->gs_sub_type = sub_type;
+	cthdr->cmd_rsp_code = bfa_os_htons(cmd_code);
+}
+
+u16
+fc_gidpn_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+	       wwn_t port_name)
+{
+
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_gidpn_req_s *gidpn =
+			(struct fcgs_gidpn_req_s *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+	fc_gs_cthdr_build(cthdr, s_id, GS_GID_PN);
+
+	bfa_os_memset(gidpn, 0, sizeof(struct fcgs_gidpn_req_s));
+	gidpn->port_name = port_name;
+	return (sizeof(struct fcgs_gidpn_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_gpnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+	       u32 port_id)
+{
+
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	fcgs_gpnid_req_t *gpnid = (fcgs_gpnid_req_t *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+	fc_gs_cthdr_build(cthdr, s_id, GS_GPN_ID);
+
+	bfa_os_memset(gpnid, 0, sizeof(fcgs_gpnid_req_t));
+	gpnid->dap = port_id;
+	return (sizeof(fcgs_gpnid_req_t) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_gnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+	       u32 port_id)
+{
+
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	fcgs_gnnid_req_t *gnnid = (fcgs_gnnid_req_t *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+	fc_gs_cthdr_build(cthdr, s_id, GS_GNN_ID);
+
+	bfa_os_memset(gnnid, 0, sizeof(fcgs_gnnid_req_t));
+	gnnid->dap = port_id;
+	return (sizeof(fcgs_gnnid_req_t) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_ct_rsp_parse(struct ct_hdr_s *cthdr)
+{
+	if (bfa_os_ntohs(cthdr->cmd_rsp_code) != CT_RSP_ACCEPT) {
+		if (cthdr->reason_code == CT_RSN_LOGICAL_BUSY)
+			return FC_PARSE_BUSY;
+		else
+			return FC_PARSE_FAILURE;
+	}
+
+	return FC_PARSE_OK;
+}
+
+u16
+fc_scr_build(struct fchs_s *fchs, struct fc_scr_s *scr, u8 set_br_reg,
+			u32 s_id, u16 ox_id)
+{
+	u32        d_id = bfa_os_hton3b(FC_FABRIC_CONTROLLER);
+
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+	bfa_os_memset(scr, 0, sizeof(struct fc_scr_s));
+	scr->command = FC_ELS_SCR;
+	scr->reg_func = FC_SCR_REG_FUNC_FULL;
+	if (set_br_reg)
+		scr->vu_reg_func = FC_VU_SCR_REG_FUNC_FABRIC_NAME_CHANGE;
+
+	return (sizeof(struct fc_scr_s));
+}
+
+u16
+fc_rscn_build(struct fchs_s *fchs, struct fc_rscn_pl_s *rscn, u32 s_id,
+			u16 ox_id)
+{
+	u32        d_id = bfa_os_hton3b(FC_FABRIC_CONTROLLER);
+	u16        payldlen;
+
+	fc_els_req_build(fchs, d_id, s_id, ox_id);
+	rscn->command = FC_ELS_RSCN;
+	rscn->pagelen = sizeof(rscn->event[0]);
+
+	payldlen = sizeof(u32) + rscn->pagelen;
+	rscn->payldlen = bfa_os_htons(payldlen);
+
+	rscn->event[0].format = FC_RSCN_FORMAT_PORTID;
+	rscn->event[0].portid = s_id;
+
+	return (sizeof(struct fc_rscn_pl_s));
+}
+
+u16
+fc_rftid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+	       enum bfa_port_role roles)
+{
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_rftid_req_s *rftid =
+			(struct fcgs_rftid_req_s *) (cthdr + 1);
+	u32        type_value, d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u8         index;
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+	fc_gs_cthdr_build(cthdr, s_id, GS_RFT_ID);
+
+	bfa_os_memset(rftid, 0, sizeof(struct fcgs_rftid_req_s));
+
+	rftid->dap = s_id;
+
+	/* By default, FCP FC4 Type is registered */
+	index = FC_TYPE_FCP >> 5;
+	type_value = 1 << (FC_TYPE_FCP % 32);
+	rftid->fc4_type[index] = bfa_os_htonl(type_value);
+
+	if (roles & BFA_PORT_ROLE_FCP_IPFC) {
+		index = FC_TYPE_IP >> 5;
+		type_value = 1 << (FC_TYPE_IP % 32);
+		rftid->fc4_type[index] |= bfa_os_htonl(type_value);
+	}
+
+	return (sizeof(struct fcgs_rftid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rftid_build_sol(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u16 ox_id, u8 *fc4_bitmap,
+			u32 bitmap_size)
+{
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_rftid_req_s *rftid =
+			(struct fcgs_rftid_req_s *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+	fc_gs_cthdr_build(cthdr, s_id, GS_RFT_ID);
+
+	bfa_os_memset(rftid, 0, sizeof(struct fcgs_rftid_req_s));
+
+	rftid->dap = s_id;
+	bfa_os_memcpy((void *)rftid->fc4_type, (void *)fc4_bitmap,
+			(bitmap_size < 32 ? bitmap_size : 32));
+
+	return (sizeof(struct fcgs_rftid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rffid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+	       u8 fc4_type, u8 fc4_ftrs)
+{
+	struct ct_hdr_s         *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_rffid_req_s *rffid =
+			(struct fcgs_rffid_req_s *) (cthdr + 1);
+	u32         d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+	fc_gs_cthdr_build(cthdr, s_id, GS_RFF_ID);
+
+	bfa_os_memset(rffid, 0, sizeof(struct fcgs_rffid_req_s));
+
+	rffid->dap 		 	= s_id;
+	rffid->fc4ftr_bits  = fc4_ftrs;
+	rffid->fc4_type		= fc4_type;
+
+	return (sizeof(struct fcgs_rffid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rspnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+		u8 *name)
+{
+
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_rspnid_req_s *rspnid =
+			(struct fcgs_rspnid_req_s *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+	fc_gs_cthdr_build(cthdr, s_id, GS_RSPN_ID);
+
+	bfa_os_memset(rspnid, 0, sizeof(struct fcgs_rspnid_req_s));
+
+	rspnid->dap = s_id;
+	rspnid->spn_len = (u8) strlen((char *)name);
+	strncpy((char *)rspnid->spn, (char *)name, rspnid->spn_len);
+
+	return (sizeof(struct fcgs_rspnid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_gid_ft_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u8 fc4_type)
+{
+
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_gidft_req_s *gidft =
+			(struct fcgs_gidft_req_s *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+
+	fc_gs_cthdr_build(cthdr, s_id, GS_GID_FT);
+
+	bfa_os_memset(gidft, 0, sizeof(struct fcgs_gidft_req_s));
+	gidft->fc4_type = fc4_type;
+	gidft->domain_id = 0;
+	gidft->area_id = 0;
+
+	return (sizeof(struct fcgs_gidft_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rpnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
+	       wwn_t port_name)
+{
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_rpnid_req_s *rpnid =
+			(struct fcgs_rpnid_req_s *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+	fc_gs_cthdr_build(cthdr, s_id, GS_RPN_ID);
+
+	bfa_os_memset(rpnid, 0, sizeof(struct fcgs_rpnid_req_s));
+	rpnid->port_id = port_id;
+	rpnid->port_name = port_name;
+
+	return (sizeof(struct fcgs_rpnid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
+	       wwn_t node_name)
+{
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_rnnid_req_s *rnnid =
+			(struct fcgs_rnnid_req_s *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+	fc_gs_cthdr_build(cthdr, s_id, GS_RNN_ID);
+
+	bfa_os_memset(rnnid, 0, sizeof(struct fcgs_rnnid_req_s));
+	rnnid->port_id = port_id;
+	rnnid->node_name = node_name;
+
+	return (sizeof(struct fcgs_rnnid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rcsid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
+	       u32 cos)
+{
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_rcsid_req_s *rcsid =
+			(struct fcgs_rcsid_req_s *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+	fc_gs_cthdr_build(cthdr, s_id, GS_RCS_ID);
+
+	bfa_os_memset(rcsid, 0, sizeof(struct fcgs_rcsid_req_s));
+	rcsid->port_id = port_id;
+	rcsid->cos = cos;
+
+	return (sizeof(struct fcgs_rcsid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rptid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
+	       u8 port_type)
+{
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_rptid_req_s *rptid =
+			(struct fcgs_rptid_req_s *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+	fc_gs_cthdr_build(cthdr, s_id, GS_RPT_ID);
+
+	bfa_os_memset(rptid, 0, sizeof(struct fcgs_rptid_req_s));
+	rptid->port_id = port_id;
+	rptid->port_type = port_type;
+
+	return (sizeof(struct fcgs_rptid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_ganxt_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id)
+{
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	struct fcgs_ganxt_req_s *ganxt =
+			(struct fcgs_ganxt_req_s *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+	fc_gs_cthdr_build(cthdr, s_id, GS_GA_NXT);
+
+	bfa_os_memset(ganxt, 0, sizeof(struct fcgs_ganxt_req_s));
+	ganxt->port_id = port_id;
+
+	return (sizeof(struct ct_hdr_s) + sizeof(struct fcgs_ganxt_req_s));
+}
+
+/*
+ * Builds fc hdr and ct hdr for FDMI requests.
+ */
+u16
+fc_fdmi_reqhdr_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+		     u16 cmd_code)
+{
+
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	u32        d_id = bfa_os_hton3b(FC_MGMT_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+	fc_gs_fdmi_cthdr_build(cthdr, s_id, cmd_code);
+
+	return (sizeof(struct ct_hdr_s));
+}
+
+/*
+ * Given a FC4 Type, this function returns a fc4 type bitmask
+ */
+void
+fc_get_fc4type_bitmask(u8 fc4_type, u8 *bit_mask)
+{
+	u8         index;
+	u32       *ptr = (u32 *) bit_mask;
+	u32        type_value;
+
+	/*
+	 * @todo : Check for bitmask size
+	 */
+
+	index = fc4_type >> 5;
+	type_value = 1 << (fc4_type % 32);
+	ptr[index] = bfa_os_htonl(type_value);
+
+}
+
+/*
+ * GMAL Request
+ */
+u16
+fc_gmal_req_build(struct fchs_s *fchs, void *pyld, u32 s_id, wwn_t wwn)
+{
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	fcgs_gmal_req_t *gmal = (fcgs_gmal_req_t *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_MGMT_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+	fc_gs_ms_cthdr_build(cthdr, s_id, GS_FC_GMAL_CMD,
+			CT_GSSUBTYPE_CFGSERVER);
+
+	bfa_os_memset(gmal, 0, sizeof(fcgs_gmal_req_t));
+	gmal->wwn = wwn;
+
+	return (sizeof(struct ct_hdr_s) + sizeof(fcgs_gmal_req_t));
+}
+
+/*
+ * GFN (Get Fabric Name) Request
+ */
+u16
+fc_gfn_req_build(struct fchs_s *fchs, void *pyld, u32 s_id, wwn_t wwn)
+{
+	struct ct_hdr_s       *cthdr = (struct ct_hdr_s *) pyld;
+	fcgs_gfn_req_t *gfn = (fcgs_gfn_req_t *) (cthdr + 1);
+	u32        d_id = bfa_os_hton3b(FC_MGMT_SERVER);
+
+	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+	fc_gs_ms_cthdr_build(cthdr, s_id, GS_FC_GFN_CMD,
+			CT_GSSUBTYPE_CFGSERVER);
+
+	bfa_os_memset(gfn, 0, sizeof(fcgs_gfn_req_t));
+	gfn->wwn = wwn;
+
+	return (sizeof(struct ct_hdr_s) + sizeof(fcgs_gfn_req_t));
+}
diff --git a/drivers/scsi/bfa/fcbuild.h b/drivers/scsi/bfa/fcbuild.h
new file mode 100644
index 000000000000..4d248424f7b3
--- /dev/null
+++ b/drivers/scsi/bfa/fcbuild.h
@@ -0,0 +1,273 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * fcbuild.h - FC link service frame building and parsing routines
+ */
+
+#ifndef __FCBUILD_H__
+#define __FCBUILD_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/fc.h>
+#include <protocol/fcp.h>
+#include <protocol/ct.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_pport.h>
+
+/*
+ * Utility Macros/functions
+ */
+
+#define fcif_sof_set(_ifhdr, _sof)	(_ifhdr)->sof = FC_ ## _sof
+#define fcif_eof_set(_ifhdr, _eof)	(_ifhdr)->eof = FC_ ## _eof
+
+#define wwn_is_equal(_wwn1, _wwn2)		\
+	(memcmp(&(_wwn1), &(_wwn2), sizeof(wwn_t)) == 0)
+
+#define fc_roundup(_l, _s) (((_l) + ((_s) - 1)) & ~((_s) - 1))
+
+/*
+ * Given the fc response length, this routine will return
+ * the length of the actual payload bytes following the CT header.
+ *
+ * Assumes the input response length does not include the crc, eof, etc.
+ */
+static inline   u32
+fc_get_ctresp_pyld_len(u32 resp_len)
+{
+	return (resp_len - sizeof(struct ct_hdr_s));
+}
+
+/*
+ * Convert bfa speed to rpsc speed value.
+ */
+static inline enum bfa_pport_speed
+fc_rpsc_operspeed_to_bfa_speed(enum fc_rpsc_op_speed_s speed)
+{
+	switch (speed) {
+
+	case RPSC_OP_SPEED_1G:
+		return BFA_PPORT_SPEED_1GBPS;
+
+	case RPSC_OP_SPEED_2G:
+		return BFA_PPORT_SPEED_2GBPS;
+
+	case RPSC_OP_SPEED_4G:
+		return BFA_PPORT_SPEED_4GBPS;
+
+	case RPSC_OP_SPEED_8G:
+		return BFA_PPORT_SPEED_8GBPS;
+
+	default:
+		return BFA_PPORT_SPEED_UNKNOWN;
+	}
+}
+
+/*
+ * Convert RPSC speed to bfa speed value.
+ */
+static inline   enum fc_rpsc_op_speed_s
+fc_bfa_speed_to_rpsc_operspeed(enum bfa_pport_speed op_speed)
+{
+	switch (op_speed) {
+
+	case BFA_PPORT_SPEED_1GBPS:
+		return RPSC_OP_SPEED_1G;
+
+	case BFA_PPORT_SPEED_2GBPS:
+		return RPSC_OP_SPEED_2G;
+
+	case BFA_PPORT_SPEED_4GBPS:
+		return RPSC_OP_SPEED_4G;
+
+	case BFA_PPORT_SPEED_8GBPS:
+		return RPSC_OP_SPEED_8G;
+
+	default:
+		return RPSC_OP_SPEED_NOT_EST;
+	}
+}
+enum fc_parse_status {
+	FC_PARSE_OK = 0,
+	FC_PARSE_FAILURE = 1,
+	FC_PARSE_BUSY = 2,
+	FC_PARSE_LEN_INVAL,
+	FC_PARSE_ACC_INVAL,
+	FC_PARSE_PWWN_NOT_EQUAL,
+	FC_PARSE_NWWN_NOT_EQUAL,
+	FC_PARSE_RXSZ_INVAL,
+	FC_PARSE_NOT_FCP,
+	FC_PARSE_OPAFLAG_INVAL,
+	FC_PARSE_RPAFLAG_INVAL,
+	FC_PARSE_OPA_INVAL,
+	FC_PARSE_RPA_INVAL,
+
+};
+
+struct fc_templates_s {
+	struct fchs_s          fc_els_req;
+	struct fchs_s          fc_bls_req;
+	struct fc_logi_s      plogi;
+	struct fc_rrq_s        rrq;
+};
+
+void fcbuild_init(void);
+
+u16 fc_flogi_build(struct fchs_s *fchs, struct fc_logi_s *flogi,
+			u32 s_id, u16 ox_id, wwn_t port_name,
+			wwn_t node_name, u16 pdu_size, u8 set_npiv,
+			u8 set_auth, u16 local_bb_credits);
+u16 fc_fdisc_build(struct fchs_s *buf, struct fc_logi_s *flogi,
+			u32 s_id, u16 ox_id, wwn_t port_name,
+			wwn_t node_name, u16 pdu_size);
+u16 fc_flogi_acc_build(struct fchs_s *fchs, struct fc_logi_s *flogi,
+			u32 s_id, u16 ox_id, wwn_t port_name,
+			wwn_t node_name, u16 pdu_size,
+			u16 local_bb_credits);
+u16 fc_plogi_build(struct fchs_s *fchs, void *pld, u32 d_id,
+			u32 s_id, u16 ox_id, wwn_t port_name,
+			wwn_t node_name, u16 pdu_size);
+enum fc_parse_status fc_plogi_parse(struct fchs_s *fchs);
+u16 fc_abts_build(struct fchs_s *buf, u32 d_id, u32 s_id,
+			u16 ox_id);
+enum fc_parse_status fc_abts_rsp_parse(struct fchs_s *buf, int len);
+u16 fc_rrq_build(struct fchs_s *buf, struct fc_rrq_s *rrq, u32 d_id,
+			u32 s_id, u16 ox_id, u16 rrq_oxid);
+enum fc_parse_status fc_rrq_rsp_parse(struct fchs_s *buf, int len);
+u16 fc_rspnid_build(struct fchs_s *fchs, void *pld, u32 s_id,
+			u16 ox_id, u8 *name);
+u16 fc_rftid_build(struct fchs_s *fchs, void *pld, u32 s_id,
+			u16 ox_id, enum bfa_port_role role);
+u16 fc_rftid_build_sol(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u16 ox_id, u8 *fc4_bitmap,
+			u32 bitmap_size);
+u16 fc_rffid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u16 ox_id, u8 fc4_type, u8 fc4_ftrs);
+u16 fc_gidpn_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u16 ox_id, wwn_t port_name);
+u16 fc_gpnid_build(struct fchs_s *fchs, void *pld, u32 s_id,
+			u16 ox_id, u32 port_id);
+u16 fc_scr_build(struct fchs_s *fchs, struct fc_scr_s *scr,
+			u8 set_br_reg, u32 s_id, u16 ox_id);
+u16 fc_plogi_acc_build(struct fchs_s *fchs, void *pld, u32 d_id,
+			u32 s_id, u16 ox_id,
+			wwn_t port_name, wwn_t node_name, u16 pdu_size);
+
+u16 fc_adisc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			wwn_t port_name, wwn_t node_name);
+enum fc_parse_status fc_adisc_parse(struct fchs_s *fchs, void *pld,
+			u32 host_dap,
+			wwn_t node_name, wwn_t port_name);
+enum fc_parse_status fc_adisc_rsp_parse(struct fc_adisc_s *adisc, int len,
+			wwn_t port_name, wwn_t node_name);
+u16 fc_adisc_acc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			wwn_t port_name, wwn_t node_name);
+u16 fc_ls_rjt_build(struct fchs_s *fchs, struct fc_ls_rjt_s *ls_rjt,
+			u32 d_id, u32 s_id, u16 ox_id,
+			u8 reason_code, u8 reason_code_expl);
+u16 fc_ls_acc_build(struct fchs_s *fchs, struct fc_els_cmd_s *els_cmd,
+			u32 d_id, u32 s_id, u16 ox_id);
+u16 fc_prli_build(struct fchs_s *fchs, void *pld, u32 d_id,
+			u32 s_id, u16 ox_id);
+enum fc_parse_status fc_prli_rsp_parse(struct fc_prli_s *prli, int len);
+
+u16 fc_prli_acc_build(struct fchs_s *fchs, void *pld, u32 d_id,
+			u32 s_id, u16 ox_id,
+			enum bfa_port_role role);
+u16 fc_rnid_build(struct fchs_s *fchs, struct fc_rnid_cmd_s *rnid,
+			u32 d_id, u32 s_id, u16 ox_id,
+			u32 data_format);
+u16 fc_rnid_acc_build(struct fchs_s *fchs, struct fc_rnid_acc_s *rnid_acc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			u32 data_format,
+			struct fc_rnid_common_id_data_s *common_id_data,
+			struct fc_rnid_general_topology_data_s *
+			gen_topo_data);
+u16 fc_rpsc2_build(struct fchs_s *fchs, struct fc_rpsc2_cmd_s *rps2c,
+			u32 d_id, u32 s_id,
+			u32 *pid_list, u16 npids);
+u16 fc_rpsc_build(struct fchs_s *fchs, struct fc_rpsc_cmd_s *rpsc,
+			u32 d_id, u32 s_id, u16 ox_id);
+u16 fc_rpsc_acc_build(struct fchs_s *fchs, struct fc_rpsc_acc_s *rpsc_acc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			struct fc_rpsc_speed_info_s *oper_speed);
+u16 fc_gid_ft_build(struct fchs_s *fchs, void *pld, u32 s_id,
+			u8 fc4_type);
+u16 fc_rpnid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u32 port_id, wwn_t port_name);
+u16 fc_rnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u32 port_id, wwn_t node_name);
+u16 fc_rcsid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u32 port_id, u32 cos);
+u16 fc_rptid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u32 port_id, u8 port_type);
+u16 fc_ganxt_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u32 port_id);
+u16 fc_logo_build(struct fchs_s *fchs, struct fc_logo_s *logo,
+			u32 d_id, u32 s_id, u16 ox_id,
+			wwn_t port_name);
+u16 fc_logo_acc_build(struct fchs_s *fchs, void *pld, u32 d_id,
+			u32 s_id, u16 ox_id);
+u16 fc_fdmi_reqhdr_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u16 cmd_code);
+u16 fc_gmal_req_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			wwn_t wwn);
+u16 fc_gfn_req_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			wwn_t wwn);
+void fc_get_fc4type_bitmask(u8 fc4_type, u8 *bit_mask);
+void fc_els_req_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id);
+enum fc_parse_status fc_els_rsp_parse(struct fchs_s *fchs, int len);
+enum fc_parse_status fc_plogi_rsp_parse(struct fchs_s *fchs, int len,
+			 wwn_t port_name);
+enum fc_parse_status fc_prli_parse(struct fc_prli_s *prli);
+enum fc_parse_status fc_pdisc_parse(struct fchs_s *fchs, wwn_t node_name,
+			wwn_t port_name);
+u16 fc_ba_acc_build(struct fchs_s *fchs, struct fc_ba_acc_s *ba_acc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			u16 rx_id);
+int fc_logout_params_pages(struct fchs_s *fc_frame, u8 els_code);
+u16 fc_tprlo_acc_build(struct fchs_s *fchs,
+			struct fc_tprlo_acc_s *tprlo_acc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			int num_pages);
+u16 fc_prlo_acc_build(struct fchs_s *fchs, struct fc_prlo_acc_s *prlo_acc,
+			u32 d_id, u32 s_id, u16 ox_id,
+			int num_pages);
+u16 fc_logo_rsp_parse(struct fchs_s *fchs, int len);
+u16 fc_pdisc_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id, wwn_t port_name, wwn_t node_name,
+			u16 pdu_size);
+u16 fc_pdisc_rsp_parse(struct fchs_s *fchs, int len, wwn_t port_name);
+u16 fc_prlo_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id, int num_pages);
+u16 fc_prlo_rsp_parse(struct fchs_s *fchs, int len);
+u16 fc_tprlo_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id, int num_pages,
+			enum fc_tprlo_type tprlo_type, u32 tpr_id);
+u16 fc_tprlo_rsp_parse(struct fchs_s *fchs, int len);
+u16 fc_ba_rjt_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+			u16 ox_id, u32 reason_code,
+			u32 reason_expl);
+u16 fc_gnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+			u16 ox_id, u32 port_id);
+u16 fc_ct_rsp_parse(struct ct_hdr_s *cthdr);
+u16 fc_rscn_build(struct fchs_s *fchs, struct fc_rscn_pl_s *rscn,
+			u32 s_id, u16 ox_id);
+#endif
diff --git a/drivers/scsi/bfa/fcpim.c b/drivers/scsi/bfa/fcpim.c
new file mode 100644
index 000000000000..8ce5d8934677
--- /dev/null
+++ b/drivers/scsi/bfa/fcpim.c
@@ -0,0 +1,844 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcpim.c - FCP initiator mode i-t nexus state machine
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_fcpim.h"
+#include "fcs_rport.h"
+#include "fcs_lport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+#include <fcs/bfa_fcs_fcpim.h>
+#include <fcb/bfa_fcb_fcpim.h>
+#include <aen/bfa_aen_itnim.h>
+
+BFA_TRC_FILE(FCS, FCPIM);
+
+/*
+ * forward declarations
+ */
+static void     bfa_fcs_itnim_timeout(void *arg);
+static void     bfa_fcs_itnim_free(struct bfa_fcs_itnim_s *itnim);
+static void     bfa_fcs_itnim_send_prli(void *itnim_cbarg,
+					struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_itnim_prli_response(void *fcsarg,
+					    struct bfa_fcxp_s *fcxp,
+					    void *cbarg,
+					    bfa_status_t req_status,
+					    u32 rsp_len,
+					    u32 resid_len,
+					    struct fchs_s *rsp_fchs);
+static void     bfa_fcs_itnim_aen_post(struct bfa_fcs_itnim_s *itnim,
+				       enum bfa_itnim_aen_event event);
+
+/**
+ *  fcs_itnim_sm FCS itnim state machine events
+ */
+
+enum bfa_fcs_itnim_event {
+	BFA_FCS_ITNIM_SM_ONLINE = 1,	/*  rport online event */
+	BFA_FCS_ITNIM_SM_OFFLINE = 2,	/*  rport offline */
+	BFA_FCS_ITNIM_SM_FRMSENT = 3,	/*  prli frame is sent */
+	BFA_FCS_ITNIM_SM_RSP_OK = 4,	/*  good response */
+	BFA_FCS_ITNIM_SM_RSP_ERROR = 5,	/*  error response */
+	BFA_FCS_ITNIM_SM_TIMEOUT = 6,	/*  delay timeout */
+	BFA_FCS_ITNIM_SM_HCB_OFFLINE = 7,	/*  BFA online callback */
+	BFA_FCS_ITNIM_SM_HCB_ONLINE = 8,	/*  BFA offline callback */
+	BFA_FCS_ITNIM_SM_INITIATOR = 9,	/*  rport is initiator */
+	BFA_FCS_ITNIM_SM_DELETE = 10,	/*  delete event from rport */
+	BFA_FCS_ITNIM_SM_PRLO = 11,	/*  delete event from rport */
+};
+
+static void     bfa_fcs_itnim_sm_offline(struct bfa_fcs_itnim_s *itnim,
+					 enum bfa_fcs_itnim_event event);
+static void     bfa_fcs_itnim_sm_prli_send(struct bfa_fcs_itnim_s *itnim,
+					   enum bfa_fcs_itnim_event event);
+static void     bfa_fcs_itnim_sm_prli(struct bfa_fcs_itnim_s *itnim,
+				      enum bfa_fcs_itnim_event event);
+static void     bfa_fcs_itnim_sm_prli_retry(struct bfa_fcs_itnim_s *itnim,
+					    enum bfa_fcs_itnim_event event);
+static void     bfa_fcs_itnim_sm_hcb_online(struct bfa_fcs_itnim_s *itnim,
+					    enum bfa_fcs_itnim_event event);
+static void     bfa_fcs_itnim_sm_online(struct bfa_fcs_itnim_s *itnim,
+					enum bfa_fcs_itnim_event event);
+static void     bfa_fcs_itnim_sm_hcb_offline(struct bfa_fcs_itnim_s *itnim,
+					     enum bfa_fcs_itnim_event event);
+static void     bfa_fcs_itnim_sm_initiator(struct bfa_fcs_itnim_s *itnim,
+					   enum bfa_fcs_itnim_event event);
+
+static struct bfa_sm_table_s itnim_sm_table[] = {
+	{BFA_SM(bfa_fcs_itnim_sm_offline), BFA_ITNIM_OFFLINE},
+	{BFA_SM(bfa_fcs_itnim_sm_prli_send), BFA_ITNIM_PRLI_SEND},
+	{BFA_SM(bfa_fcs_itnim_sm_prli), BFA_ITNIM_PRLI_SENT},
+	{BFA_SM(bfa_fcs_itnim_sm_prli_retry), BFA_ITNIM_PRLI_RETRY},
+	{BFA_SM(bfa_fcs_itnim_sm_hcb_online), BFA_ITNIM_HCB_ONLINE},
+	{BFA_SM(bfa_fcs_itnim_sm_online), BFA_ITNIM_ONLINE},
+	{BFA_SM(bfa_fcs_itnim_sm_hcb_offline), BFA_ITNIM_HCB_OFFLINE},
+	{BFA_SM(bfa_fcs_itnim_sm_initiator), BFA_ITNIM_INITIATIOR},
+};
+
+/**
+ *  fcs_itnim_sm FCS itnim state machine
+ */
+
+static void
+bfa_fcs_itnim_sm_offline(struct bfa_fcs_itnim_s *itnim,
+			 enum bfa_fcs_itnim_event event)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_trc(itnim->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_ITNIM_SM_ONLINE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_prli_send);
+		bfa_fcs_itnim_send_prli(itnim, NULL);
+		break;
+
+	case BFA_FCS_ITNIM_SM_OFFLINE:
+		bfa_fcs_rport_itnim_ack(itnim->rport);
+		break;
+
+	case BFA_FCS_ITNIM_SM_INITIATOR:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_initiator);
+		break;
+
+	case BFA_FCS_ITNIM_SM_DELETE:
+		bfa_fcs_itnim_free(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+
+}
+
+static void
+bfa_fcs_itnim_sm_prli_send(struct bfa_fcs_itnim_s *itnim,
+			   enum bfa_fcs_itnim_event event)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_trc(itnim->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_ITNIM_SM_FRMSENT:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_prli);
+		break;
+
+	case BFA_FCS_ITNIM_SM_INITIATOR:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_initiator);
+		bfa_fcxp_walloc_cancel(itnim->fcs->bfa, &itnim->fcxp_wqe);
+		break;
+
+	case BFA_FCS_ITNIM_SM_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcxp_walloc_cancel(itnim->fcs->bfa, &itnim->fcxp_wqe);
+		bfa_fcs_rport_itnim_ack(itnim->rport);
+		break;
+
+	case BFA_FCS_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcxp_walloc_cancel(itnim->fcs->bfa, &itnim->fcxp_wqe);
+		bfa_fcs_itnim_free(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_itnim_sm_prli(struct bfa_fcs_itnim_s *itnim,
+		      enum bfa_fcs_itnim_event event)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_trc(itnim->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_ITNIM_SM_RSP_OK:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_hcb_online);
+		bfa_itnim_online(itnim->bfa_itnim, itnim->seq_rec);
+		break;
+
+	case BFA_FCS_ITNIM_SM_RSP_ERROR:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_prli_retry);
+		bfa_timer_start(itnim->fcs->bfa, &itnim->timer,
+				bfa_fcs_itnim_timeout, itnim,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case BFA_FCS_ITNIM_SM_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcxp_discard(itnim->fcxp);
+		bfa_fcs_rport_itnim_ack(itnim->rport);
+		break;
+
+	case BFA_FCS_ITNIM_SM_INITIATOR:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_initiator);
+		/*
+		 * dont discard fcxp. accept will reach same state
+		 */
+		break;
+
+	case BFA_FCS_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcxp_discard(itnim->fcxp);
+		bfa_fcs_itnim_free(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_itnim_sm_prli_retry(struct bfa_fcs_itnim_s *itnim,
+			    enum bfa_fcs_itnim_event event)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_trc(itnim->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_ITNIM_SM_TIMEOUT:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_prli_send);
+		bfa_fcs_itnim_send_prli(itnim, NULL);
+		break;
+
+	case BFA_FCS_ITNIM_SM_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_timer_stop(&itnim->timer);
+		bfa_fcs_rport_itnim_ack(itnim->rport);
+		break;
+
+	case BFA_FCS_ITNIM_SM_INITIATOR:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_initiator);
+		bfa_timer_stop(&itnim->timer);
+		break;
+
+	case BFA_FCS_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_timer_stop(&itnim->timer);
+		bfa_fcs_itnim_free(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_itnim_sm_hcb_online(struct bfa_fcs_itnim_s *itnim,
+			    enum bfa_fcs_itnim_event event)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_trc(itnim->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_ITNIM_SM_HCB_ONLINE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_online);
+		bfa_fcb_itnim_online(itnim->itnim_drv);
+		bfa_fcs_itnim_aen_post(itnim, BFA_ITNIM_AEN_ONLINE);
+		break;
+
+	case BFA_FCS_ITNIM_SM_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_itnim_offline(itnim->bfa_itnim);
+		bfa_fcs_rport_itnim_ack(itnim->rport);
+		break;
+
+	case BFA_FCS_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcs_itnim_free(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_itnim_sm_online(struct bfa_fcs_itnim_s *itnim,
+			enum bfa_fcs_itnim_event event)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_trc(itnim->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_ITNIM_SM_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_hcb_offline);
+		bfa_fcb_itnim_offline(itnim->itnim_drv);
+		bfa_itnim_offline(itnim->bfa_itnim);
+		if (bfa_fcs_port_is_online(itnim->rport->port) == BFA_TRUE) {
+			bfa_fcs_itnim_aen_post(itnim, BFA_ITNIM_AEN_DISCONNECT);
+		} else {
+			bfa_fcs_itnim_aen_post(itnim, BFA_ITNIM_AEN_OFFLINE);
+		}
+		break;
+
+	case BFA_FCS_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcs_itnim_free(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_itnim_sm_hcb_offline(struct bfa_fcs_itnim_s *itnim,
+			     enum bfa_fcs_itnim_event event)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_trc(itnim->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_ITNIM_SM_HCB_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcs_rport_itnim_ack(itnim->rport);
+		break;
+
+	case BFA_FCS_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcs_itnim_free(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/*
+ * This state is set when a discovered rport is also in intiator mode.
+ * This ITN is marked as no_op and is not active and will not be truned into
+ * online state.
+ */
+static void
+bfa_fcs_itnim_sm_initiator(struct bfa_fcs_itnim_s *itnim,
+			   enum bfa_fcs_itnim_event event)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_trc(itnim->fcs, event);
+
+	switch (event) {
+	case BFA_FCS_ITNIM_SM_OFFLINE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcs_rport_itnim_ack(itnim->rport);
+		break;
+
+	case BFA_FCS_ITNIM_SM_RSP_ERROR:
+	case BFA_FCS_ITNIM_SM_ONLINE:
+	case BFA_FCS_ITNIM_SM_INITIATOR:
+		break;
+
+	case BFA_FCS_ITNIM_SM_DELETE:
+		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+		bfa_fcs_itnim_free(itnim);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  itnim_private FCS ITNIM private interfaces
+ */
+
+static void
+bfa_fcs_itnim_aen_post(struct bfa_fcs_itnim_s *itnim,
+		       enum bfa_itnim_aen_event event)
+{
+	struct bfa_fcs_rport_s *rport = itnim->rport;
+	union bfa_aen_data_u aen_data;
+	struct bfa_log_mod_s *logmod = rport->fcs->logm;
+	wwn_t           lpwwn = bfa_fcs_port_get_pwwn(rport->port);
+	wwn_t           rpwwn = rport->pwwn;
+	char            lpwwn_ptr[BFA_STRING_32];
+	char            rpwwn_ptr[BFA_STRING_32];
+
+	/*
+	 * Don't post events for well known addresses
+	 */
+	if (BFA_FCS_PID_IS_WKA(rport->pid))
+		return;
+
+	wwn2str(lpwwn_ptr, lpwwn);
+	wwn2str(rpwwn_ptr, rpwwn);
+
+	switch (event) {
+	case BFA_ITNIM_AEN_ONLINE:
+		bfa_log(logmod, BFA_AEN_ITNIM_ONLINE, rpwwn_ptr, lpwwn_ptr);
+		break;
+	case BFA_ITNIM_AEN_OFFLINE:
+		bfa_log(logmod, BFA_AEN_ITNIM_OFFLINE, rpwwn_ptr, lpwwn_ptr);
+		break;
+	case BFA_ITNIM_AEN_DISCONNECT:
+		bfa_log(logmod, BFA_AEN_ITNIM_DISCONNECT, rpwwn_ptr, lpwwn_ptr);
+		break;
+	default:
+		break;
+	}
+
+	aen_data.itnim.vf_id = rport->port->fabric->vf_id;
+	aen_data.itnim.ppwwn =
+		bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(itnim->fcs));
+	aen_data.itnim.lpwwn = lpwwn;
+	aen_data.itnim.rpwwn = rpwwn;
+}
+
+static void
+bfa_fcs_itnim_send_prli(void *itnim_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_itnim_s *itnim = itnim_cbarg;
+	struct bfa_fcs_rport_s *rport = itnim->rport;
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	int             len;
+
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		itnim->stats.fcxp_alloc_wait++;
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &itnim->fcxp_wqe,
+				    bfa_fcs_itnim_send_prli, itnim);
+		return;
+	}
+	itnim->fcxp = fcxp;
+
+	len = fc_prli_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), itnim->rport->pid,
+			    bfa_fcs_port_get_fcid(port), 0);
+
+	bfa_fcxp_send(fcxp, rport->bfa_rport, port->fabric->vf_id, port->lp_tag,
+		      BFA_FALSE, FC_CLASS_3, len, &fchs,
+		      bfa_fcs_itnim_prli_response, (void *)itnim, FC_MAX_PDUSZ,
+		      FC_RA_TOV);
+
+	itnim->stats.prli_sent++;
+	bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_FRMSENT);
+}
+
+static void
+bfa_fcs_itnim_prli_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+			    bfa_status_t req_status, u32 rsp_len,
+			    u32 resid_len, struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cbarg;
+	struct fc_els_cmd_s   *els_cmd;
+	struct fc_prli_s      *prli_resp;
+	struct fc_ls_rjt_s    *ls_rjt;
+	struct fc_prli_params_s *sparams;
+
+	bfa_trc(itnim->fcs, req_status);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		itnim->stats.prli_rsp_err++;
+		bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_RSP_ERROR);
+		return;
+	}
+
+	els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+	if (els_cmd->els_code == FC_ELS_ACC) {
+		prli_resp = (struct fc_prli_s *) els_cmd;
+
+		if (fc_prli_rsp_parse(prli_resp, rsp_len) != FC_PARSE_OK) {
+			bfa_trc(itnim->fcs, rsp_len);
+			/*
+			 * Check if this  r-port is also in Initiator mode.
+			 * If so, we need to set this ITN as a no-op.
+			 */
+			if (prli_resp->parampage.servparams.initiator) {
+				bfa_trc(itnim->fcs, prli_resp->parampage.type);
+				itnim->rport->scsi_function =
+					BFA_RPORT_INITIATOR;
+				itnim->stats.prli_rsp_acc++;
+				bfa_sm_send_event(itnim,
+						  BFA_FCS_ITNIM_SM_INITIATOR);
+				return;
+			}
+
+			itnim->stats.prli_rsp_parse_err++;
+			return;
+		}
+		itnim->rport->scsi_function = BFA_RPORT_TARGET;
+
+		sparams = &prli_resp->parampage.servparams;
+		itnim->seq_rec = sparams->retry;
+		itnim->rec_support = sparams->rec_support;
+		itnim->task_retry_id = sparams->task_retry_id;
+		itnim->conf_comp = sparams->confirm;
+
+		itnim->stats.prli_rsp_acc++;
+		bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_RSP_OK);
+	} else {
+		ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+		bfa_trc(itnim->fcs, ls_rjt->reason_code);
+		bfa_trc(itnim->fcs, ls_rjt->reason_code_expl);
+
+		itnim->stats.prli_rsp_rjt++;
+		bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_RSP_ERROR);
+	}
+}
+
+static void
+bfa_fcs_itnim_timeout(void *arg)
+{
+	struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)arg;
+
+	itnim->stats.timeout++;
+	bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_TIMEOUT);
+}
+
+static void
+bfa_fcs_itnim_free(struct bfa_fcs_itnim_s *itnim)
+{
+	bfa_itnim_delete(itnim->bfa_itnim);
+	bfa_fcb_itnim_free(itnim->fcs->bfad, itnim->itnim_drv);
+}
+
+
+
+/**
+ *  itnim_public FCS ITNIM public interfaces
+ */
+
+/**
+ * 	Called by rport when a new rport is created.
+ *
+ * @param[in] rport	-  remote port.
+ */
+struct bfa_fcs_itnim_s *
+bfa_fcs_itnim_create(struct bfa_fcs_rport_s *rport)
+{
+	struct bfa_fcs_port_s *port = rport->port;
+	struct bfa_fcs_itnim_s *itnim;
+	struct bfad_itnim_s *itnim_drv;
+	struct bfa_itnim_s *bfa_itnim;
+
+	/*
+	 * call bfad to allocate the itnim
+	 */
+	bfa_fcb_itnim_alloc(port->fcs->bfad, &itnim, &itnim_drv);
+	if (itnim == NULL) {
+		bfa_trc(port->fcs, rport->pwwn);
+		return NULL;
+	}
+
+	/*
+	 * Initialize itnim
+	 */
+	itnim->rport = rport;
+	itnim->fcs = rport->fcs;
+	itnim->itnim_drv = itnim_drv;
+
+	/*
+	 * call BFA to create the itnim
+	 */
+	bfa_itnim = bfa_itnim_create(port->fcs->bfa, rport->bfa_rport, itnim);
+
+	if (bfa_itnim == NULL) {
+		bfa_trc(port->fcs, rport->pwwn);
+		bfa_fcb_itnim_free(port->fcs->bfad, itnim_drv);
+		bfa_assert(0);
+		return NULL;
+	}
+
+	itnim->bfa_itnim = bfa_itnim;
+	itnim->seq_rec = BFA_FALSE;
+	itnim->rec_support = BFA_FALSE;
+	itnim->conf_comp = BFA_FALSE;
+	itnim->task_retry_id = BFA_FALSE;
+
+	/*
+	 * Set State machine
+	 */
+	bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+
+	return itnim;
+}
+
+/**
+ * 	Called by rport to delete  the instance of FCPIM.
+ *
+ * @param[in] rport	-  remote port.
+ */
+void
+bfa_fcs_itnim_delete(struct bfa_fcs_itnim_s *itnim)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pid);
+	bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_DELETE);
+}
+
+/**
+ * Notification from rport that PLOGI is complete to initiate FC-4 session.
+ */
+void
+bfa_fcs_itnim_rport_online(struct bfa_fcs_itnim_s *itnim)
+{
+	itnim->stats.onlines++;
+
+	if (!BFA_FCS_PID_IS_WKA(itnim->rport->pid)) {
+		bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_ONLINE);
+	} else {
+		/*
+		 * For well known addresses, we set the itnim to initiator
+		 * state
+		 */
+		itnim->stats.initiator++;
+		bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_INITIATOR);
+	}
+}
+
+/**
+ * Called by rport to handle a remote device offline.
+ */
+void
+bfa_fcs_itnim_rport_offline(struct bfa_fcs_itnim_s *itnim)
+{
+	itnim->stats.offlines++;
+	bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_OFFLINE);
+}
+
+/**
+ * Called by rport when remote port is known to be an initiator from
+ * PRLI received.
+ */
+void
+bfa_fcs_itnim_is_initiator(struct bfa_fcs_itnim_s *itnim)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pid);
+	itnim->stats.initiator++;
+	bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_INITIATOR);
+}
+
+/**
+ * Called by rport to check if the itnim is online.
+ */
+bfa_status_t
+bfa_fcs_itnim_get_online_state(struct bfa_fcs_itnim_s *itnim)
+{
+	bfa_trc(itnim->fcs, itnim->rport->pid);
+	switch (bfa_sm_to_state(itnim_sm_table, itnim->sm)) {
+	case BFA_ITNIM_ONLINE:
+	case BFA_ITNIM_INITIATIOR:
+		return BFA_STATUS_OK;
+
+	default:
+		return BFA_STATUS_NO_FCPIM_NEXUS;
+
+	}
+}
+
+/**
+ * BFA completion callback for bfa_itnim_online().
+ */
+void
+bfa_cb_itnim_online(void *cbarg)
+{
+	struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cbarg;
+
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_HCB_ONLINE);
+}
+
+/**
+ * BFA completion callback for bfa_itnim_offline().
+ */
+void
+bfa_cb_itnim_offline(void *cb_arg)
+{
+	struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cb_arg;
+
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_HCB_OFFLINE);
+}
+
+/**
+ * Mark the beginning of PATH TOV handling. IO completion callbacks
+ * are still pending.
+ */
+void
+bfa_cb_itnim_tov_begin(void *cb_arg)
+{
+	struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cb_arg;
+
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_fcb_itnim_tov_begin(itnim->itnim_drv);
+}
+
+/**
+ * Mark the end of PATH TOV handling. All pending IOs are already cleaned up.
+ */
+void
+bfa_cb_itnim_tov(void *cb_arg)
+{
+	struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cb_arg;
+
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_fcb_itnim_tov(itnim->itnim_drv);
+}
+
+/**
+ * 		BFA notification to FCS/driver for second level error recovery.
+ *
+ * Atleast one I/O request has timedout and target is unresponsive to
+ * repeated abort requests. Second level error recovery should be initiated
+ * by starting implicit logout and recovery procedures.
+ */
+void
+bfa_cb_itnim_sler(void *cb_arg)
+{
+	struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cb_arg;
+
+	itnim->stats.sler++;
+	bfa_trc(itnim->fcs, itnim->rport->pwwn);
+	bfa_fcs_rport_logo_imp(itnim->rport);
+}
+
+struct bfa_fcs_itnim_s *
+bfa_fcs_itnim_lookup(struct bfa_fcs_port_s *port, wwn_t rpwwn)
+{
+	struct bfa_fcs_rport_s *rport;
+	rport = bfa_fcs_rport_lookup(port, rpwwn);
+
+	if (!rport)
+		return NULL;
+
+	bfa_assert(rport->itnim != NULL);
+	return (rport->itnim);
+}
+
+bfa_status_t
+bfa_fcs_itnim_attr_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+		       struct bfa_itnim_attr_s *attr)
+{
+	struct bfa_fcs_itnim_s *itnim = NULL;
+
+	itnim = bfa_fcs_itnim_lookup(port, rpwwn);
+
+	if (itnim == NULL)
+		return BFA_STATUS_NO_FCPIM_NEXUS;
+
+	attr->state = bfa_sm_to_state(itnim_sm_table, itnim->sm);
+	attr->retry = itnim->seq_rec;
+	attr->rec_support = itnim->rec_support;
+	attr->conf_comp = itnim->conf_comp;
+	attr->task_retry_id = itnim->task_retry_id;
+
+	return BFA_STATUS_OK;
+}
+
+bfa_status_t
+bfa_fcs_itnim_stats_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+			struct bfa_itnim_stats_s *stats)
+{
+	struct bfa_fcs_itnim_s *itnim = NULL;
+
+	bfa_assert(port != NULL);
+
+	itnim = bfa_fcs_itnim_lookup(port, rpwwn);
+
+	if (itnim == NULL)
+		return BFA_STATUS_NO_FCPIM_NEXUS;
+
+	bfa_os_memcpy(stats, &itnim->stats, sizeof(struct bfa_itnim_stats_s));
+
+	return BFA_STATUS_OK;
+}
+
+bfa_status_t
+bfa_fcs_itnim_stats_clear(struct bfa_fcs_port_s *port, wwn_t rpwwn)
+{
+	struct bfa_fcs_itnim_s *itnim = NULL;
+
+	bfa_assert(port != NULL);
+
+	itnim = bfa_fcs_itnim_lookup(port, rpwwn);
+
+	if (itnim == NULL)
+		return BFA_STATUS_NO_FCPIM_NEXUS;
+
+	bfa_os_memset(&itnim->stats, 0, sizeof(struct bfa_itnim_stats_s));
+	return BFA_STATUS_OK;
+}
+
+void
+bfa_fcs_fcpim_uf_recv(struct bfa_fcs_itnim_s *itnim, struct fchs_s *fchs,
+		      u16 len)
+{
+	struct fc_els_cmd_s   *els_cmd;
+
+	bfa_trc(itnim->fcs, fchs->type);
+
+	if (fchs->type != FC_TYPE_ELS)
+		return;
+
+	els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+	bfa_trc(itnim->fcs, els_cmd->els_code);
+
+	switch (els_cmd->els_code) {
+	case FC_ELS_PRLO:
+		/* bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_PRLO); */
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+void
+bfa_fcs_itnim_pause(struct bfa_fcs_itnim_s *itnim)
+{
+}
+
+void
+bfa_fcs_itnim_resume(struct bfa_fcs_itnim_s *itnim)
+{
+}
+
+/**
+ *   Module initialization
+ */
+void
+bfa_fcs_fcpim_modinit(struct bfa_fcs_s *fcs)
+{
+}
+
+/**
+ *   Module cleanup
+ */
+void
+bfa_fcs_fcpim_modexit(struct bfa_fcs_s *fcs)
+{
+	bfa_fcs_modexit_comp(fcs);
+}
+
+
diff --git a/drivers/scsi/bfa/fcptm.c b/drivers/scsi/bfa/fcptm.c
new file mode 100644
index 000000000000..8c8b08c72e7a
--- /dev/null
+++ b/drivers/scsi/bfa/fcptm.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * This file contains dummy FCPTM routines to aid in Initiator Mode only
+ * compilation of OS driver.
+ *
+ */
+
+#include "bfa_os_inc.h"
+#include "fcs_rport.h"
+#include "fcs_fcptm.h"
+#include "fcs/bfa_fcs_rport.h"
+
+struct bfa_fcs_tin_s *
+bfa_fcs_tin_create(struct bfa_fcs_rport_s *rport)
+{
+	return NULL;
+}
+
+void
+bfa_fcs_tin_delete(struct bfa_fcs_tin_s *tin)
+{
+}
+
+void
+bfa_fcs_tin_rport_offline(struct bfa_fcs_tin_s *tin)
+{
+}
+
+void
+bfa_fcs_tin_rport_online(struct bfa_fcs_tin_s *tin)
+{
+}
+
+void
+bfa_fcs_tin_rx_prli(struct bfa_fcs_tin_s *tin, struct fchs_s *fchs, u16 len)
+{
+}
+
+void
+bfa_fcs_fcptm_uf_recv(struct bfa_fcs_tin_s *tin, struct fchs_s *fchs, u16 len)
+{
+}
+
+void
+bfa_fcs_tin_pause(struct bfa_fcs_tin_s *tin)
+{
+}
+
+void
+bfa_fcs_tin_resume(struct bfa_fcs_tin_s *tin)
+{
+}
diff --git a/drivers/scsi/bfa/fcs.h b/drivers/scsi/bfa/fcs.h
new file mode 100644
index 000000000000..deee685e8478
--- /dev/null
+++ b/drivers/scsi/bfa/fcs.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs.h FCS module functions
+ */
+
+
+#ifndef __FCS_H__
+#define __FCS_H__
+
+#define __fcs_min_cfg(__fcs)       (__fcs)->min_cfg
+
+void bfa_fcs_modexit_comp(struct bfa_fcs_s *fcs);
+
+#endif /* __FCS_H__ */
diff --git a/drivers/scsi/bfa/fcs_auth.h b/drivers/scsi/bfa/fcs_auth.h
new file mode 100644
index 000000000000..65d155fea3d7
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_auth.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs_uf.h FCS unsolicited frame receive
+ */
+
+
+#ifndef __FCS_AUTH_H__
+#define __FCS_AUTH_H__
+
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_vport.h>
+#include <fcs/bfa_fcs_lport.h>
+
+/*
+ * fcs friend functions: only between fcs modules
+ */
+void bfa_fcs_auth_uf_recv(struct bfa_fcs_fabric_s *fabric, int len);
+void bfa_fcs_auth_start(struct bfa_fcs_fabric_s *fabric);
+void bfa_fcs_auth_stop(struct bfa_fcs_fabric_s *fabric);
+
+#endif /* __FCS_UF_H__ */
diff --git a/drivers/scsi/bfa/fcs_fabric.h b/drivers/scsi/bfa/fcs_fabric.h
new file mode 100644
index 000000000000..eee960820f86
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_fabric.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs_lport.h FCS logical port interfaces
+ */
+
+#ifndef __FCS_FABRIC_H__
+#define __FCS_FABRIC_H__
+
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_vport.h>
+#include <fcs/bfa_fcs_lport.h>
+
+/*
+* fcs friend functions: only between fcs modules
+ */
+void            bfa_fcs_fabric_modinit(struct bfa_fcs_s *fcs);
+void            bfa_fcs_fabric_modexit(struct bfa_fcs_s *fcs);
+void            bfa_fcs_fabric_modsusp(struct bfa_fcs_s *fcs);
+void            bfa_fcs_fabric_link_up(struct bfa_fcs_fabric_s *fabric);
+void            bfa_fcs_fabric_link_down(struct bfa_fcs_fabric_s *fabric);
+void            bfa_fcs_fabric_addvport(struct bfa_fcs_fabric_s *fabric,
+					struct bfa_fcs_vport_s *vport);
+void            bfa_fcs_fabric_delvport(struct bfa_fcs_fabric_s *fabric,
+					struct bfa_fcs_vport_s *vport);
+int             bfa_fcs_fabric_is_online(struct bfa_fcs_fabric_s *fabric);
+struct bfa_fcs_vport_s *bfa_fcs_fabric_vport_lookup(
+			struct bfa_fcs_fabric_s *fabric, wwn_t pwwn);
+void            bfa_fcs_fabric_modstart(struct bfa_fcs_s *fcs);
+void            bfa_fcs_fabric_uf_recv(struct bfa_fcs_fabric_s *fabric,
+			struct fchs_s *fchs, u16 len);
+u16        bfa_fcs_fabric_vport_count(struct bfa_fcs_fabric_s *fabric);
+bfa_boolean_t   bfa_fcs_fabric_is_loopback(struct bfa_fcs_fabric_s *fabric);
+enum bfa_pport_type bfa_fcs_fabric_port_type(struct bfa_fcs_fabric_s *fabric);
+void     	bfa_fcs_fabric_psymb_init(struct bfa_fcs_fabric_s *fabric);
+void bfa_fcs_fabric_port_delete_comp(struct bfa_fcs_fabric_s *fabric);
+
+bfa_status_t bfa_fcs_fabric_addvf(struct bfa_fcs_fabric_s *vf,
+			struct bfa_fcs_s *fcs, struct bfa_port_cfg_s *port_cfg,
+			struct bfad_vf_s *vf_drv);
+void bfa_fcs_auth_finished(struct bfa_fcs_fabric_s *fabric,
+			enum auth_status status);
+
+void bfa_fcs_fabric_set_fabric_name(struct bfa_fcs_fabric_s *fabric,
+			wwn_t fabric_name);
+#endif /* __FCS_FABRIC_H__ */
diff --git a/drivers/scsi/bfa/fcs_fcpim.h b/drivers/scsi/bfa/fcs_fcpim.h
new file mode 100644
index 000000000000..61e9e2687de3
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_fcpim.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __FCS_FCPIM_H__
+#define __FCS_FCPIM_H__
+
+#include <defs/bfa_defs_port.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+
+/*
+ * Following routines are from FCPIM and will be called by rport.
+ */
+struct bfa_fcs_itnim_s *bfa_fcs_itnim_create(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_itnim_delete(struct bfa_fcs_itnim_s *itnim);
+void bfa_fcs_itnim_rport_offline(struct bfa_fcs_itnim_s *itnim);
+void bfa_fcs_itnim_rport_online(struct bfa_fcs_itnim_s *itnim);
+bfa_status_t bfa_fcs_itnim_get_online_state(struct bfa_fcs_itnim_s *itnim);
+
+void bfa_fcs_itnim_is_initiator(struct bfa_fcs_itnim_s *itnim);
+void bfa_fcs_itnim_pause(struct bfa_fcs_itnim_s *itnim);
+void bfa_fcs_itnim_resume(struct bfa_fcs_itnim_s *itnim);
+
+/*
+ * Modudle init/cleanup routines.
+ */
+void bfa_fcs_fcpim_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fcpim_modexit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fcpim_uf_recv(struct bfa_fcs_itnim_s *itnim, struct fchs_s *fchs,
+			u16 len);
+#endif /* __FCS_FCPIM_H__ */
diff --git a/drivers/scsi/bfa/fcs_fcptm.h b/drivers/scsi/bfa/fcs_fcptm.h
new file mode 100644
index 000000000000..ffff0829fd31
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_fcptm.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FCS_FCPTM_H__
+#define __FCS_FCPTM_H__
+
+#include <defs/bfa_defs_port.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+
+/*
+ * Following routines are from FCPTM and will be called by rport.
+ */
+struct bfa_fcs_tin_s *bfa_fcs_tin_create(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_tin_rport_offline(struct bfa_fcs_tin_s *tin);
+void bfa_fcs_tin_rport_online(struct bfa_fcs_tin_s *tin);
+void bfa_fcs_tin_delete(struct bfa_fcs_tin_s *tin);
+void bfa_fcs_tin_rx_prli(struct bfa_fcs_tin_s *tin, struct fchs_s *fchs,
+			u16 len);
+void bfa_fcs_tin_pause(struct bfa_fcs_tin_s *tin);
+void bfa_fcs_tin_resume(struct bfa_fcs_tin_s *tin);
+
+/*
+ * Modudle init/cleanup routines.
+ */
+void bfa_fcs_fcptm_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fcptm_modexit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fcptm_uf_recv(struct bfa_fcs_tin_s *tin, struct fchs_s *fchs,
+			u16 len);
+
+#endif /* __FCS_FCPTM_H__ */
diff --git a/drivers/scsi/bfa/fcs_fcxp.h b/drivers/scsi/bfa/fcs_fcxp.h
new file mode 100644
index 000000000000..8277fe9c2b70
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_fcxp.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs_fcxp.h FCXP helper macros for FCS
+ */
+
+
+#ifndef __FCS_FCXP_H__
+#define __FCS_FCXP_H__
+
+#define bfa_fcs_fcxp_alloc(__fcs)	\
+	bfa_fcxp_alloc(NULL, (__fcs)->bfa, 0, 0, NULL, NULL, NULL, NULL)
+
+#endif /* __FCS_FCXP_H__ */
diff --git a/drivers/scsi/bfa/fcs_lport.h b/drivers/scsi/bfa/fcs_lport.h
new file mode 100644
index 000000000000..ae744ba35671
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_lport.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs_lport.h FCS logical port interfaces
+ */
+
+#ifndef __FCS_LPORT_H__
+#define __FCS_LPORT_H__
+
+#define __VPORT_H__
+#include <defs/bfa_defs_port.h>
+#include <bfa_svc.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+#include <fcs/bfa_fcs_vport.h>
+#include <fcs_fabric.h>
+#include <fcs_ms.h>
+#include <cs/bfa_q.h>
+#include <fcbuild.h>
+
+/*
+ * PID used in P2P/N2N ( In Big Endian)
+ */
+#define N2N_LOCAL_PID	    0x010000
+#define N2N_REMOTE_PID		0x020000
+
+/*
+ * Misc Timeouts
+ */
+/*
+ * To be used when spawning a timer before retrying a failed command. Milli
+ * Secs.
+ */
+#define	BFA_FCS_RETRY_TIMEOUT 2000
+
+/*
+ * Check for Port/Vport Mode/Role
+ */
+#define	BFA_FCS_VPORT_IS_INITIATOR_MODE(port) \
+		(port->port_cfg.roles & BFA_PORT_ROLE_FCP_IM)
+
+#define	BFA_FCS_VPORT_IS_TARGET_MODE(port) \
+		(port->port_cfg.roles & BFA_PORT_ROLE_FCP_TM)
+
+#define	BFA_FCS_VPORT_IS_IPFC_MODE(port) \
+		(port->port_cfg.roles & BFA_PORT_ROLE_FCP_IPFC)
+
+/*
+ * Is this a Well Known Address
+ */
+#define BFA_FCS_PID_IS_WKA(pid)  ((bfa_os_ntoh3b(pid) > 0xFFF000) ?  1 : 0)
+
+/*
+ * Pointer to elements within Port
+ */
+#define BFA_FCS_GET_HAL_FROM_PORT(port)  (port->fcs->bfa)
+#define BFA_FCS_GET_NS_FROM_PORT(port)  (&port->port_topo.pfab.ns)
+#define BFA_FCS_GET_SCN_FROM_PORT(port)  (&port->port_topo.pfab.scn)
+#define BFA_FCS_GET_MS_FROM_PORT(port)  (&port->port_topo.pfab.ms)
+#define BFA_FCS_GET_FDMI_FROM_PORT(port)  (&port->port_topo.pfab.ms.fdmi)
+
+/*
+ * handler for unsolicied frames
+ */
+void bfa_fcs_port_uf_recv(struct bfa_fcs_port_s *lport, struct fchs_s *fchs,
+			u16 len);
+
+/*
+ * Following routines will be called by Fabric to indicate port
+ * online/offline to vport.
+ */
+void bfa_fcs_lport_init(struct bfa_fcs_port_s *lport, struct bfa_fcs_s *fcs,
+			u16 vf_id, struct bfa_port_cfg_s *port_cfg,
+			struct bfa_fcs_vport_s *vport);
+void bfa_fcs_port_online(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_offline(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_delete(struct bfa_fcs_port_s *port);
+bfa_boolean_t   bfa_fcs_port_is_online(struct bfa_fcs_port_s *port);
+
+/*
+ * Lookup rport based on PID
+ */
+struct bfa_fcs_rport_s *bfa_fcs_port_get_rport_by_pid(
+			struct bfa_fcs_port_s *port, u32 pid);
+
+/*
+ * Lookup rport based on PWWN
+ */
+struct bfa_fcs_rport_s *bfa_fcs_port_get_rport_by_pwwn(
+			struct bfa_fcs_port_s *port, wwn_t pwwn);
+struct bfa_fcs_rport_s *bfa_fcs_port_get_rport_by_nwwn(
+			struct bfa_fcs_port_s *port, wwn_t nwwn);
+void bfa_fcs_port_add_rport(struct bfa_fcs_port_s *port,
+			struct bfa_fcs_rport_s *rport);
+void bfa_fcs_port_del_rport(struct bfa_fcs_port_s *port,
+			struct bfa_fcs_rport_s *rport);
+
+void bfa_fcs_port_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_port_modexit(struct bfa_fcs_s *fcs);
+void bfa_fcs_port_lip(struct bfa_fcs_port_s *port);
+
+#endif /* __FCS_LPORT_H__ */
diff --git a/drivers/scsi/bfa/fcs_ms.h b/drivers/scsi/bfa/fcs_ms.h
new file mode 100644
index 000000000000..b6a8c12876f4
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_ms.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs_ms.h FCS ms interfaces
+ */
+#ifndef __FCS_MS_H__
+#define __FCS_MS_H__
+
+/* MS FCS routines */
+void bfa_fcs_port_ms_init(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_ms_offline(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_ms_online(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_ms_fabric_rscn(struct bfa_fcs_port_s *port);
+
+/* FDMI FCS routines */
+void bfa_fcs_port_fdmi_init(struct bfa_fcs_port_ms_s *ms);
+void bfa_fcs_port_fdmi_offline(struct bfa_fcs_port_ms_s *ms);
+void bfa_fcs_port_fdmi_online(struct bfa_fcs_port_ms_s *ms);
+
+#endif
diff --git a/drivers/scsi/bfa/fcs_port.h b/drivers/scsi/bfa/fcs_port.h
new file mode 100644
index 000000000000..abb65191dd27
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_port.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs_pport.h FCS physical port interfaces
+ */
+
+
+#ifndef __FCS_PPORT_H__
+#define __FCS_PPORT_H__
+
+/*
+ * fcs friend functions: only between fcs modules
+ */
+void bfa_fcs_pport_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_pport_modexit(struct bfa_fcs_s *fcs);
+
+#endif /* __FCS_PPORT_H__ */
diff --git a/drivers/scsi/bfa/fcs_rport.h b/drivers/scsi/bfa/fcs_rport.h
new file mode 100644
index 000000000000..f601e9d74236
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_rport.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs_rport.h FCS rport interfaces and defines
+ */
+
+#ifndef __FCS_RPORT_H__
+#define __FCS_RPORT_H__
+
+#include <fcs/bfa_fcs_rport.h>
+
+void bfa_fcs_rport_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_rport_modexit(struct bfa_fcs_s *fcs);
+
+void bfa_fcs_rport_uf_recv(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs,
+			u16 len);
+void bfa_fcs_rport_scn(struct bfa_fcs_rport_s *rport);
+
+struct bfa_fcs_rport_s *bfa_fcs_rport_create(struct bfa_fcs_port_s *port,
+			u32 pid);
+void bfa_fcs_rport_delete(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_online(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_offline(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_start(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+			struct fc_logi_s *plogi_rsp);
+void bfa_fcs_rport_plogi_create(struct bfa_fcs_port_s *port,
+			struct fchs_s *rx_fchs,
+			struct fc_logi_s *plogi);
+void bfa_fcs_rport_plogi(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs,
+			struct fc_logi_s *plogi);
+void bfa_fcs_rport_logo_imp(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_itnim_ack(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_itntm_ack(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_tin_ack(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_fcptm_offline_done(struct bfa_fcs_rport_s *rport);
+int  bfa_fcs_rport_get_state(struct bfa_fcs_rport_s *rport);
+struct bfa_fcs_rport_s *bfa_fcs_rport_create_by_wwn(struct bfa_fcs_port_s *port,
+			wwn_t wwn);
+
+
+/* Rport Features */
+void  bfa_fcs_rpf_init(struct bfa_fcs_rport_s *rport);
+void  bfa_fcs_rpf_rport_online(struct bfa_fcs_rport_s *rport);
+void  bfa_fcs_rpf_rport_offline(struct bfa_fcs_rport_s *rport);
+
+#endif /* __FCS_RPORT_H__ */
diff --git a/drivers/scsi/bfa/fcs_trcmod.h b/drivers/scsi/bfa/fcs_trcmod.h
new file mode 100644
index 000000000000..41b5ae8d7644
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_trcmod.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs_trcmod.h BFA FCS trace modules
+ */
+
+#ifndef __FCS_TRCMOD_H__
+#define __FCS_TRCMOD_H__
+
+#include <cs/bfa_trc.h>
+
+/*
+ * !!! Only append to the enums defined here to avoid any versioning
+ * !!! needed between trace utility and driver version
+ */
+enum {
+	BFA_TRC_FCS_FABRIC		= 1,
+	BFA_TRC_FCS_VFAPI		= 2,
+	BFA_TRC_FCS_PORT		= 3,
+	BFA_TRC_FCS_VPORT		= 4,
+	BFA_TRC_FCS_VP_API		= 5,
+	BFA_TRC_FCS_VPS			= 6,
+	BFA_TRC_FCS_RPORT		= 7,
+	BFA_TRC_FCS_FCPIM		= 8,
+	BFA_TRC_FCS_FCPTM		= 9,
+	BFA_TRC_FCS_NS			= 10,
+	BFA_TRC_FCS_SCN			= 11,
+	BFA_TRC_FCS_LOOP		= 12,
+	BFA_TRC_FCS_UF			= 13,
+	BFA_TRC_FCS_PPORT		= 14,
+	BFA_TRC_FCS_FCPIP		= 15,
+	BFA_TRC_FCS_PORT_API	= 16,
+	BFA_TRC_FCS_RPORT_API	= 17,
+	BFA_TRC_FCS_AUTH		= 18,
+	BFA_TRC_FCS_N2N			= 19,
+	BFA_TRC_FCS_MS			= 20,
+	BFA_TRC_FCS_FDMI		= 21,
+	BFA_TRC_FCS_RPORT_FTRS	= 22,
+};
+
+#endif /* __FCS_TRCMOD_H__ */
diff --git a/drivers/scsi/bfa/fcs_uf.h b/drivers/scsi/bfa/fcs_uf.h
new file mode 100644
index 000000000000..96f1bdcb31ed
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_uf.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs_uf.h FCS unsolicited frame receive
+ */
+
+
+#ifndef __FCS_UF_H__
+#define __FCS_UF_H__
+
+/*
+ * fcs friend functions: only between fcs modules
+ */
+void bfa_fcs_uf_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_uf_modexit(struct bfa_fcs_s *fcs);
+
+#endif /* __FCS_UF_H__ */
diff --git a/drivers/scsi/bfa/fcs_vport.h b/drivers/scsi/bfa/fcs_vport.h
new file mode 100644
index 000000000000..9e80b6a97b7f
--- /dev/null
+++ b/drivers/scsi/bfa/fcs_vport.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FCS_VPORT_H__
+#define __FCS_VPORT_H__
+
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_vport.h>
+#include <defs/bfa_defs_pci.h>
+
+/*
+ * Modudle init/cleanup routines.
+ */
+
+void bfa_fcs_vport_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_vport_modexit(struct bfa_fcs_s *fcs);
+
+void bfa_fcs_vport_cleanup(struct bfa_fcs_vport_s *vport);
+void bfa_fcs_vport_online(struct bfa_fcs_vport_s *vport);
+void bfa_fcs_vport_offline(struct bfa_fcs_vport_s *vport);
+void bfa_fcs_vport_delete_comp(struct bfa_fcs_vport_s *vport);
+u32 bfa_fcs_vport_get_max(struct bfa_fcs_s *fcs);
+
+#endif /* __FCS_VPORT_H__ */
+
diff --git a/drivers/scsi/bfa/fdmi.c b/drivers/scsi/bfa/fdmi.c
new file mode 100644
index 000000000000..b845eb272c78
--- /dev/null
+++ b/drivers/scsi/bfa/fdmi.c
@@ -0,0 +1,1223 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  port_api.c BFA FCS port
+ */
+
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "lport_priv.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include <fcs/bfa_fcs_fdmi.h>
+
+BFA_TRC_FILE(FCS, FDMI);
+
+#define BFA_FCS_FDMI_CMD_MAX_RETRIES 2
+
+/*
+ * forward declarations
+ */
+static void     bfa_fcs_port_fdmi_send_rhba(void *fdmi_cbarg,
+					    struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_fdmi_send_rprt(void *fdmi_cbarg,
+					    struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_fdmi_send_rpa(void *fdmi_cbarg,
+					   struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_fdmi_rhba_response(void *fcsarg,
+						struct bfa_fcxp_s *fcxp,
+						void *cbarg,
+						bfa_status_t req_status,
+						u32 rsp_len,
+						u32 resid_len,
+						struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_fdmi_rprt_response(void *fcsarg,
+						struct bfa_fcxp_s *fcxp,
+						void *cbarg,
+						bfa_status_t req_status,
+						u32 rsp_len,
+						u32 resid_len,
+						struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_fdmi_rpa_response(void *fcsarg,
+					       struct bfa_fcxp_s *fcxp,
+					       void *cbarg,
+					       bfa_status_t req_status,
+					       u32 rsp_len,
+					       u32 resid_len,
+					       struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_fdmi_timeout(void *arg);
+static u16 bfa_fcs_port_fdmi_build_rhba_pyld(
+			struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
+static u16 bfa_fcs_port_fdmi_build_rprt_pyld(
+			struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
+static u16 bfa_fcs_port_fdmi_build_rpa_pyld(
+			struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
+static u16 bfa_fcs_port_fdmi_build_portattr_block(
+			struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
+void bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_port_fdmi_s *fdmi,
+			struct bfa_fcs_fdmi_hba_attr_s *hba_attr);
+void bfa_fcs_fdmi_get_portattr(struct bfa_fcs_port_fdmi_s *fdmi,
+			struct bfa_fcs_fdmi_port_attr_s *port_attr);
+/**
+ *  fcs_fdmi_sm FCS FDMI state machine
+ */
+
+/**
+ *  FDMI State Machine events
+ */
+enum port_fdmi_event {
+	FDMISM_EVENT_PORT_ONLINE = 1,
+	FDMISM_EVENT_PORT_OFFLINE = 2,
+	FDMISM_EVENT_RSP_OK = 4,
+	FDMISM_EVENT_RSP_ERROR = 5,
+	FDMISM_EVENT_TIMEOUT = 6,
+	FDMISM_EVENT_RHBA_SENT = 7,
+	FDMISM_EVENT_RPRT_SENT = 8,
+	FDMISM_EVENT_RPA_SENT = 9,
+};
+
+static void bfa_fcs_port_fdmi_sm_offline(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_sending_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rhba_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_sending_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rprt_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_sending_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void     bfa_fcs_port_fdmi_sm_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void     bfa_fcs_port_fdmi_sm_rpa_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+static void     bfa_fcs_port_fdmi_sm_online(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+/**
+ * 		Start in offline state - awaiting MS to send start.
+ */
+static void
+bfa_fcs_port_fdmi_sm_offline(struct bfa_fcs_port_fdmi_s *fdmi,
+			     enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	fdmi->retry_cnt = 0;
+
+	switch (event) {
+	case FDMISM_EVENT_PORT_ONLINE:
+		if (port->vport) {
+			/*
+			 * For Vports, register a new port.
+			 */
+			bfa_sm_set_state(fdmi,
+					 bfa_fcs_port_fdmi_sm_sending_rprt);
+			bfa_fcs_port_fdmi_send_rprt(fdmi, NULL);
+		} else {
+			/*
+			 * For a base port, we should first register the HBA
+			 * atribute. The HBA attribute also contains the base
+			 *  port registration.
+			 */
+			bfa_sm_set_state(fdmi,
+					 bfa_fcs_port_fdmi_sm_sending_rhba);
+			bfa_fcs_port_fdmi_send_rhba(fdmi, NULL);
+		}
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_fdmi_sm_sending_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
+				  enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_RHBA_SENT:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rhba);
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(port),
+				       &fdmi->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
+			  enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_RSP_ERROR:
+		/*
+		 * if max retries have not been reached, start timer for a
+		 * delayed retry
+		 */
+		if (fdmi->retry_cnt++ < BFA_FCS_FDMI_CMD_MAX_RETRIES) {
+			bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rhba_retry);
+			bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(port),
+					&fdmi->timer, bfa_fcs_port_fdmi_timeout,
+					fdmi, BFA_FCS_RETRY_TIMEOUT);
+		} else {
+			/*
+			 * set state to offline
+			 */
+			bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		}
+		break;
+
+	case FDMISM_EVENT_RSP_OK:
+		/*
+		 * Initiate Register Port Attributes
+		 */
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_sending_rpa);
+		fdmi->retry_cnt = 0;
+		bfa_fcs_port_fdmi_send_rpa(fdmi, NULL);
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_fcxp_discard(fdmi->fcxp);
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rhba_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+				enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_TIMEOUT:
+		/*
+		 * Retry Timer Expired. Re-send
+		 */
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_sending_rhba);
+		bfa_fcs_port_fdmi_send_rhba(fdmi, NULL);
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		bfa_timer_stop(&fdmi->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/*
+* RPRT : Register Port
+ */
+static void
+bfa_fcs_port_fdmi_sm_sending_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
+				  enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_RPRT_SENT:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rprt);
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(port),
+				       &fdmi->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
+			  enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_RSP_ERROR:
+		/*
+		 * if max retries have not been reached, start timer for a
+		 * delayed retry
+		 */
+		if (fdmi->retry_cnt++ < BFA_FCS_FDMI_CMD_MAX_RETRIES) {
+			bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rprt_retry);
+			bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(port),
+					&fdmi->timer, bfa_fcs_port_fdmi_timeout,
+					fdmi, BFA_FCS_RETRY_TIMEOUT);
+
+		} else {
+			/*
+			 * set state to offline
+			 */
+			bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+			fdmi->retry_cnt = 0;
+		}
+		break;
+
+	case FDMISM_EVENT_RSP_OK:
+		fdmi->retry_cnt = 0;
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_online);
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_fcxp_discard(fdmi->fcxp);
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rprt_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+				enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_TIMEOUT:
+		/*
+		 * Retry Timer Expired. Re-send
+		 */
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_sending_rprt);
+		bfa_fcs_port_fdmi_send_rprt(fdmi, NULL);
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		bfa_timer_stop(&fdmi->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/*
+ * Register Port Attributes
+ */
+static void
+bfa_fcs_port_fdmi_sm_sending_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
+				 enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_RPA_SENT:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rpa);
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(port),
+				       &fdmi->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
+			 enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_RSP_ERROR:
+		/*
+		 * if max retries have not been reached, start timer for a
+		 * delayed retry
+		 */
+		if (fdmi->retry_cnt++ < BFA_FCS_FDMI_CMD_MAX_RETRIES) {
+			bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rpa_retry);
+			bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(port),
+					&fdmi->timer, bfa_fcs_port_fdmi_timeout,
+					fdmi, BFA_FCS_RETRY_TIMEOUT);
+		} else {
+			/*
+			 * set state to offline
+			 */
+			bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+			fdmi->retry_cnt = 0;
+		}
+		break;
+
+	case FDMISM_EVENT_RSP_OK:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_online);
+		fdmi->retry_cnt = 0;
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_fcxp_discard(fdmi->fcxp);
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rpa_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+			       enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_TIMEOUT:
+		/*
+		 * Retry Timer Expired. Re-send
+		 */
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_sending_rpa);
+		bfa_fcs_port_fdmi_send_rpa(fdmi, NULL);
+		break;
+
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		bfa_timer_stop(&fdmi->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_fdmi_sm_online(struct bfa_fcs_port_fdmi_s *fdmi,
+			    enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	switch (event) {
+	case FDMISM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+/**
+*   RHBA : Register HBA Attributes.
+ */
+static void
+bfa_fcs_port_fdmi_send_rhba(void *fdmi_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = fdmi_cbarg;
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct fchs_s          fchs;
+	int             len, attr_len;
+	struct bfa_fcxp_s *fcxp;
+	u8        *pyld;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &fdmi->fcxp_wqe,
+				    bfa_fcs_port_fdmi_send_rhba, fdmi);
+		return;
+	}
+	fdmi->fcxp = fcxp;
+
+	pyld = bfa_fcxp_get_reqbuf(fcxp);
+	bfa_os_memset(pyld, 0, FC_MAX_PDUSZ);
+
+	len = fc_fdmi_reqhdr_build(&fchs, pyld, bfa_fcs_port_get_fcid(port),
+				   FDMI_RHBA);
+
+	attr_len = bfa_fcs_port_fdmi_build_rhba_pyld(fdmi,
+			(u8 *) ((struct ct_hdr_s *) pyld + 1));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, (len + attr_len), &fchs,
+		      bfa_fcs_port_fdmi_rhba_response, (void *)fdmi,
+		      FC_MAX_PDUSZ, FC_RA_TOV);
+
+	bfa_sm_send_event(fdmi, FDMISM_EVENT_RHBA_SENT);
+}
+
+static          u16
+bfa_fcs_port_fdmi_build_rhba_pyld(struct bfa_fcs_port_fdmi_s *fdmi,
+				  u8 *pyld)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct bfa_fcs_fdmi_hba_attr_s hba_attr;	/* @todo */
+	struct bfa_fcs_fdmi_hba_attr_s *fcs_hba_attr = &hba_attr; /* @todo */
+	struct fdmi_rhba_s    *rhba = (struct fdmi_rhba_s *) pyld;
+	struct fdmi_attr_s    *attr;
+	u8        *curr_ptr;
+	u16        len, count;
+
+	/*
+	 * get hba attributes
+	 */
+	bfa_fcs_fdmi_get_hbaattr(fdmi, fcs_hba_attr);
+
+	rhba->hba_id = bfa_fcs_port_get_pwwn(port);
+	rhba->port_list.num_ports = bfa_os_htonl(1);
+	rhba->port_list.port_entry = bfa_fcs_port_get_pwwn(port);
+
+	len = sizeof(rhba->hba_id) + sizeof(rhba->port_list);
+
+	count = 0;
+	len += sizeof(rhba->hba_attr_blk.attr_count);
+
+	/*
+	 * fill out the invididual entries of the HBA attrib Block
+	 */
+	curr_ptr = (u8 *) &rhba->hba_attr_blk.hba_attr;
+
+	/*
+	 * Node Name
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_NODENAME);
+	attr->len = sizeof(wwn_t);
+	memcpy(attr->value, &bfa_fcs_port_get_nwwn(port), attr->len);
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	count++;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * Manufacturer
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_MANUFACTURER);
+	attr->len = (u16) strlen(fcs_hba_attr->manufacturer);
+	memcpy(attr->value, fcs_hba_attr->manufacturer, attr->len);
+	/* variable fields need to be 4 byte aligned */
+	attr->len = fc_roundup(attr->len, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	count++;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * Serial Number
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_SERIALNUM);
+	attr->len = (u16) strlen(fcs_hba_attr->serial_num);
+	memcpy(attr->value, fcs_hba_attr->serial_num, attr->len);
+	/* variable fields need to be 4 byte aligned */
+	attr->len = fc_roundup(attr->len, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	count++;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * Model
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_MODEL);
+	attr->len = (u16) strlen(fcs_hba_attr->model);
+	memcpy(attr->value, fcs_hba_attr->model, attr->len);
+	/* variable fields need to be 4 byte aligned */
+	attr->len = fc_roundup(attr->len, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	count++;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * Model Desc
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_MODEL_DESC);
+	attr->len = (u16) strlen(fcs_hba_attr->model_desc);
+	memcpy(attr->value, fcs_hba_attr->model_desc, attr->len);
+	/* variable fields need to be 4 byte aligned */
+	attr->len = fc_roundup(attr->len, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	count++;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * H/W Version
+	 */
+	if (fcs_hba_attr->hw_version[0] != '\0') {
+		attr = (struct fdmi_attr_s *) curr_ptr;
+		attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_HW_VERSION);
+		attr->len = (u16) strlen(fcs_hba_attr->hw_version);
+		memcpy(attr->value, fcs_hba_attr->hw_version, attr->len);
+		/* variable fields need to be 4 byte aligned */
+		attr->len = fc_roundup(attr->len, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+		len += attr->len;
+		count++;
+		attr->len =
+			bfa_os_htons(attr->len + sizeof(attr->type) +
+				     sizeof(attr->len));
+	}
+
+	/*
+	 * Driver Version
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_DRIVER_VERSION);
+	attr->len = (u16) strlen(fcs_hba_attr->driver_version);
+	memcpy(attr->value, fcs_hba_attr->driver_version, attr->len);
+	/* variable fields need to be 4 byte aligned */
+	attr->len = fc_roundup(attr->len, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;;
+	count++;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * Option Rom Version
+	 */
+	if (fcs_hba_attr->option_rom_ver[0] != '\0') {
+		attr = (struct fdmi_attr_s *) curr_ptr;
+		attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_ROM_VERSION);
+		attr->len = (u16) strlen(fcs_hba_attr->option_rom_ver);
+		memcpy(attr->value, fcs_hba_attr->option_rom_ver, attr->len);
+		/* variable fields need to be 4 byte aligned */
+		attr->len = fc_roundup(attr->len, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+		len += attr->len;
+		count++;
+		attr->len =
+			bfa_os_htons(attr->len + sizeof(attr->type) +
+				     sizeof(attr->len));
+	}
+
+	/*
+	 * f/w Version = driver version
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_FW_VERSION);
+	attr->len = (u16) strlen(fcs_hba_attr->driver_version);
+	memcpy(attr->value, fcs_hba_attr->driver_version, attr->len);
+	/* variable fields need to be 4 byte aligned */
+	attr->len = fc_roundup(attr->len, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	count++;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * OS Name
+	 */
+	if (fcs_hba_attr->os_name[0] != '\0') {
+		attr = (struct fdmi_attr_s *) curr_ptr;
+		attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_OS_NAME);
+		attr->len = (u16) strlen(fcs_hba_attr->os_name);
+		memcpy(attr->value, fcs_hba_attr->os_name, attr->len);
+		/* variable fields need to be 4 byte aligned */
+		attr->len = fc_roundup(attr->len, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+		len += attr->len;
+		count++;
+		attr->len =
+			bfa_os_htons(attr->len + sizeof(attr->type) +
+				     sizeof(attr->len));
+	}
+
+	/*
+	 * MAX_CT_PAYLOAD
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_MAX_CT);
+	attr->len = sizeof(fcs_hba_attr->max_ct_pyld);
+	memcpy(attr->value, &fcs_hba_attr->max_ct_pyld, attr->len);
+	len += attr->len;
+	count++;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * Update size of payload
+	 */
+	len += ((sizeof(attr->type) + sizeof(attr->len)) * count);
+
+	rhba->hba_attr_blk.attr_count = bfa_os_htonl(count);
+	return len;
+}
+
+static void
+bfa_fcs_port_fdmi_rhba_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				void *cbarg, bfa_status_t req_status,
+				u32 rsp_len, u32 resid_len,
+				struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = (struct bfa_fcs_port_fdmi_s *)cbarg;
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct ct_hdr_s       *cthdr = NULL;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+		bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_OK);
+		return;
+	}
+
+	bfa_trc(port->fcs, cthdr->reason_code);
+	bfa_trc(port->fcs, cthdr->exp_code);
+	bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+}
+
+/**
+*   RPRT : Register Port
+ */
+static void
+bfa_fcs_port_fdmi_send_rprt(void *fdmi_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = fdmi_cbarg;
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct fchs_s          fchs;
+	u16        len, attr_len;
+	struct bfa_fcxp_s *fcxp;
+	u8        *pyld;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &fdmi->fcxp_wqe,
+				    bfa_fcs_port_fdmi_send_rprt, fdmi);
+		return;
+	}
+	fdmi->fcxp = fcxp;
+
+	pyld = bfa_fcxp_get_reqbuf(fcxp);
+	bfa_os_memset(pyld, 0, FC_MAX_PDUSZ);
+
+	len = fc_fdmi_reqhdr_build(&fchs, pyld, bfa_fcs_port_get_fcid(port),
+				   FDMI_RPRT);
+
+	attr_len = bfa_fcs_port_fdmi_build_rprt_pyld(fdmi,
+			(u8 *) ((struct ct_hdr_s *) pyld + 1));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len + attr_len, &fchs,
+		      bfa_fcs_port_fdmi_rprt_response, (void *)fdmi,
+		      FC_MAX_PDUSZ, FC_RA_TOV);
+
+	bfa_sm_send_event(fdmi, FDMISM_EVENT_RPRT_SENT);
+}
+
+/**
+ * This routine builds Port Attribute Block that used in RPA, RPRT commands.
+ */
+static          u16
+bfa_fcs_port_fdmi_build_portattr_block(struct bfa_fcs_port_fdmi_s *fdmi,
+				       u8 *pyld)
+{
+	struct bfa_fcs_fdmi_port_attr_s fcs_port_attr;
+	struct fdmi_port_attr_s *port_attrib = (struct fdmi_port_attr_s *) pyld;
+	struct fdmi_attr_s    *attr;
+	u8        *curr_ptr;
+	u16        len;
+	u8         count = 0;
+
+	/*
+	 * get port attributes
+	 */
+	bfa_fcs_fdmi_get_portattr(fdmi, &fcs_port_attr);
+
+	len = sizeof(port_attrib->attr_count);
+
+	/*
+	 * fill out the invididual entries
+	 */
+	curr_ptr = (u8 *) &port_attrib->port_attr;
+
+	/*
+	 * FC4 Types
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_FC4_TYPES);
+	attr->len = sizeof(fcs_port_attr.supp_fc4_types);
+	memcpy(attr->value, fcs_port_attr.supp_fc4_types, attr->len);
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	++count;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * Supported Speed
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_SUPP_SPEED);
+	attr->len = sizeof(fcs_port_attr.supp_speed);
+	memcpy(attr->value, &fcs_port_attr.supp_speed, attr->len);
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	++count;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * current Port Speed
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_PORT_SPEED);
+	attr->len = sizeof(fcs_port_attr.curr_speed);
+	memcpy(attr->value, &fcs_port_attr.curr_speed, attr->len);
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	++count;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * max frame size
+	 */
+	attr = (struct fdmi_attr_s *) curr_ptr;
+	attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_FRAME_SIZE);
+	attr->len = sizeof(fcs_port_attr.max_frm_size);
+	memcpy(attr->value, &fcs_port_attr.max_frm_size, attr->len);
+	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+	len += attr->len;
+	++count;
+	attr->len =
+		bfa_os_htons(attr->len + sizeof(attr->type) +
+			     sizeof(attr->len));
+
+	/*
+	 * OS Device Name
+	 */
+	if (fcs_port_attr.os_device_name[0] != '\0') {
+		attr = (struct fdmi_attr_s *) curr_ptr;
+		attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_DEV_NAME);
+		attr->len = (u16) strlen(fcs_port_attr.os_device_name);
+		memcpy(attr->value, fcs_port_attr.os_device_name, attr->len);
+		/* variable fields need to be 4 byte aligned */
+		attr->len = fc_roundup(attr->len, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+		len += attr->len;
+		++count;
+		attr->len =
+			bfa_os_htons(attr->len + sizeof(attr->type) +
+				     sizeof(attr->len));
+
+	}
+	/*
+	 * Host Name
+	 */
+	if (fcs_port_attr.host_name[0] != '\0') {
+		attr = (struct fdmi_attr_s *) curr_ptr;
+		attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_HOST_NAME);
+		attr->len = (u16) strlen(fcs_port_attr.host_name);
+		memcpy(attr->value, fcs_port_attr.host_name, attr->len);
+		/* variable fields need to be 4 byte aligned */
+		attr->len = fc_roundup(attr->len, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+		len += attr->len;
+		++count;
+		attr->len =
+			bfa_os_htons(attr->len + sizeof(attr->type) +
+				     sizeof(attr->len));
+
+	}
+
+	/*
+	 * Update size of payload
+	 */
+	port_attrib->attr_count = bfa_os_htonl(count);
+	len += ((sizeof(attr->type) + sizeof(attr->len)) * count);
+	return len;
+}
+
+static          u16
+bfa_fcs_port_fdmi_build_rprt_pyld(struct bfa_fcs_port_fdmi_s *fdmi,
+				  u8 *pyld)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct fdmi_rprt_s    *rprt = (struct fdmi_rprt_s *) pyld;
+	u16        len;
+
+	rprt->hba_id = bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(port->fcs));
+	rprt->port_name = bfa_fcs_port_get_pwwn(port);
+
+	len = bfa_fcs_port_fdmi_build_portattr_block(fdmi,
+			(u8 *) &rprt->port_attr_blk);
+
+	len += sizeof(rprt->hba_id) + sizeof(rprt->port_name);
+
+	return len;
+}
+
+static void
+bfa_fcs_port_fdmi_rprt_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				void *cbarg, bfa_status_t req_status,
+				u32 rsp_len, u32 resid_len,
+				struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = (struct bfa_fcs_port_fdmi_s *)cbarg;
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct ct_hdr_s       *cthdr = NULL;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+		bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_OK);
+		return;
+	}
+
+	bfa_trc(port->fcs, cthdr->reason_code);
+	bfa_trc(port->fcs, cthdr->exp_code);
+	bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+}
+
+/**
+*   RPA : Register Port Attributes.
+ */
+static void
+bfa_fcs_port_fdmi_send_rpa(void *fdmi_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = fdmi_cbarg;
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct fchs_s          fchs;
+	u16        len, attr_len;
+	struct bfa_fcxp_s *fcxp;
+	u8        *pyld;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &fdmi->fcxp_wqe,
+				    bfa_fcs_port_fdmi_send_rpa, fdmi);
+		return;
+	}
+	fdmi->fcxp = fcxp;
+
+	pyld = bfa_fcxp_get_reqbuf(fcxp);
+	bfa_os_memset(pyld, 0, FC_MAX_PDUSZ);
+
+	len = fc_fdmi_reqhdr_build(&fchs, pyld, bfa_fcs_port_get_fcid(port),
+				   FDMI_RPA);
+
+	attr_len = bfa_fcs_port_fdmi_build_rpa_pyld(fdmi,
+			(u8 *) ((struct ct_hdr_s *) pyld + 1));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len + attr_len, &fchs,
+		      bfa_fcs_port_fdmi_rpa_response, (void *)fdmi,
+		      FC_MAX_PDUSZ, FC_RA_TOV);
+
+	bfa_sm_send_event(fdmi, FDMISM_EVENT_RPA_SENT);
+}
+
+static          u16
+bfa_fcs_port_fdmi_build_rpa_pyld(struct bfa_fcs_port_fdmi_s *fdmi,
+				 u8 *pyld)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct fdmi_rpa_s     *rpa = (struct fdmi_rpa_s *) pyld;
+	u16        len;
+
+	rpa->port_name = bfa_fcs_port_get_pwwn(port);
+
+	len = bfa_fcs_port_fdmi_build_portattr_block(fdmi,
+			(u8 *) &rpa->port_attr_blk);
+
+	len += sizeof(rpa->port_name);
+
+	return len;
+}
+
+static void
+bfa_fcs_port_fdmi_rpa_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+			       void *cbarg, bfa_status_t req_status,
+			       u32 rsp_len, u32 resid_len,
+			       struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = (struct bfa_fcs_port_fdmi_s *)cbarg;
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct ct_hdr_s       *cthdr = NULL;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+		bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_OK);
+		return;
+	}
+
+	bfa_trc(port->fcs, cthdr->reason_code);
+	bfa_trc(port->fcs, cthdr->exp_code);
+	bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+}
+
+static void
+bfa_fcs_port_fdmi_timeout(void *arg)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = (struct bfa_fcs_port_fdmi_s *)arg;
+
+	bfa_sm_send_event(fdmi, FDMISM_EVENT_TIMEOUT);
+}
+
+void
+bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_port_fdmi_s *fdmi,
+			 struct bfa_fcs_fdmi_hba_attr_s *hba_attr)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct bfa_fcs_driver_info_s *driver_info = &port->fcs->driver_info;
+	struct bfa_adapter_attr_s adapter_attr;
+
+	bfa_os_memset(hba_attr, 0, sizeof(struct bfa_fcs_fdmi_hba_attr_s));
+	bfa_os_memset(&adapter_attr, 0, sizeof(struct bfa_adapter_attr_s));
+
+	bfa_ioc_get_adapter_attr(&port->fcs->bfa->ioc, &adapter_attr);
+
+	strncpy(hba_attr->manufacturer, adapter_attr.manufacturer,
+		sizeof(adapter_attr.manufacturer));
+
+	strncpy(hba_attr->serial_num, adapter_attr.serial_num,
+		sizeof(adapter_attr.serial_num));
+
+	strncpy(hba_attr->model, adapter_attr.model, sizeof(hba_attr->model));
+
+	strncpy(hba_attr->model_desc, adapter_attr.model_descr,
+		sizeof(hba_attr->model_desc));
+
+	strncpy(hba_attr->hw_version, adapter_attr.hw_ver,
+		sizeof(hba_attr->hw_version));
+
+	strncpy(hba_attr->driver_version, (char *)driver_info->version,
+		sizeof(hba_attr->driver_version));
+
+	strncpy(hba_attr->option_rom_ver, adapter_attr.optrom_ver,
+		sizeof(hba_attr->option_rom_ver));
+
+	strncpy(hba_attr->fw_version, adapter_attr.fw_ver,
+		sizeof(hba_attr->fw_version));
+
+	strncpy(hba_attr->os_name, driver_info->host_os_name,
+		sizeof(hba_attr->os_name));
+
+	/*
+	 * If there is a patch level, append it to the os name along with a
+	 * separator
+	 */
+	if (driver_info->host_os_patch[0] != '\0') {
+		strncat(hba_attr->os_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+			sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+		strncat(hba_attr->os_name, driver_info->host_os_patch,
+			sizeof(driver_info->host_os_patch));
+	}
+
+	hba_attr->max_ct_pyld = bfa_os_htonl(FC_MAX_PDUSZ);
+
+}
+
+void
+bfa_fcs_fdmi_get_portattr(struct bfa_fcs_port_fdmi_s *fdmi,
+			  struct bfa_fcs_fdmi_port_attr_s *port_attr)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+	struct bfa_fcs_driver_info_s *driver_info = &port->fcs->driver_info;
+	struct bfa_pport_attr_s pport_attr;
+
+	bfa_os_memset(port_attr, 0, sizeof(struct bfa_fcs_fdmi_port_attr_s));
+
+	/*
+	 * get pport attributes from hal
+	 */
+	bfa_pport_get_attr(port->fcs->bfa, &pport_attr);
+
+	/*
+	 * get FC4 type Bitmask
+	 */
+	fc_get_fc4type_bitmask(FC_TYPE_FCP, port_attr->supp_fc4_types);
+
+	/*
+	 * Supported Speeds
+	 */
+	port_attr->supp_speed = bfa_os_htonl(BFA_FCS_FDMI_SUPORTED_SPEEDS);
+
+	/*
+	 * Current Speed
+	 */
+	port_attr->curr_speed = bfa_os_htonl(pport_attr.speed);
+
+	/*
+	 * Max PDU Size.
+	 */
+	port_attr->max_frm_size = bfa_os_htonl(FC_MAX_PDUSZ);
+
+	/*
+	 * OS device Name
+	 */
+	strncpy(port_attr->os_device_name, (char *)driver_info->os_device_name,
+		sizeof(port_attr->os_device_name));
+
+	/*
+	 * Host name
+	 */
+	strncpy(port_attr->host_name, (char *)driver_info->host_machine_name,
+		sizeof(port_attr->host_name));
+
+}
+
+
+void
+bfa_fcs_port_fdmi_init(struct bfa_fcs_port_ms_s *ms)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = &ms->fdmi;
+
+	fdmi->ms = ms;
+	bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+}
+
+void
+bfa_fcs_port_fdmi_offline(struct bfa_fcs_port_ms_s *ms)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = &ms->fdmi;
+
+	fdmi->ms = ms;
+	bfa_sm_send_event(fdmi, FDMISM_EVENT_PORT_OFFLINE);
+}
+
+void
+bfa_fcs_port_fdmi_online(struct bfa_fcs_port_ms_s *ms)
+{
+	struct bfa_fcs_port_fdmi_s *fdmi = &ms->fdmi;
+
+	fdmi->ms = ms;
+	bfa_sm_send_event(fdmi, FDMISM_EVENT_PORT_ONLINE);
+}
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen.h b/drivers/scsi/bfa/include/aen/bfa_aen.h
new file mode 100644
index 000000000000..da8cac093d3d
--- /dev/null
+++ b/drivers/scsi/bfa/include/aen/bfa_aen.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_AEN_H__
+#define __BFA_AEN_H__
+
+#include "defs/bfa_defs_aen.h"
+
+#define BFA_AEN_MAX_ENTRY   512
+
+extern s32 bfa_aen_max_cfg_entry;
+struct bfa_aen_s {
+	void		*bfad;
+	s32		max_entry;
+	s32		write_index;
+	s32		read_index;
+	u32	bfad_num;
+	u32	seq_num;
+	void		(*aen_cb_notify)(void *bfad);
+	void		(*gettimeofday)(struct bfa_timeval_s *tv);
+	struct bfa_trc_mod_s 	*trcmod;
+	struct bfa_aen_entry_s	list[BFA_AEN_MAX_ENTRY]; /* Must be the last */
+};
+
+
+/**
+ * Public APIs
+ */
+static inline void
+bfa_aen_set_max_cfg_entry(int max_entry)
+{
+	bfa_aen_max_cfg_entry = max_entry;
+}
+
+static inline s32
+bfa_aen_get_max_cfg_entry(void)
+{
+	return bfa_aen_max_cfg_entry;
+}
+
+static inline s32
+bfa_aen_get_meminfo(void)
+{
+	return (sizeof(struct bfa_aen_entry_s) * bfa_aen_get_max_cfg_entry());
+}
+
+static inline s32
+bfa_aen_get_wi(struct bfa_aen_s *aen)
+{
+	return aen->write_index;
+}
+
+static inline s32
+bfa_aen_get_ri(struct bfa_aen_s *aen)
+{
+	return aen->read_index;
+}
+
+static inline s32
+bfa_aen_fetch_count(struct bfa_aen_s *aen, s32 read_index)
+{
+	return ((aen->write_index + aen->max_entry) - read_index)
+		% aen->max_entry;
+}
+
+s32 bfa_aen_init(struct bfa_aen_s *aen, struct bfa_trc_mod_s *trcmod,
+		void *bfad, u32 inst_id, void (*aen_cb_notify)(void *),
+		void (*gettimeofday)(struct bfa_timeval_s *));
+
+s32 bfa_aen_post(struct bfa_aen_s *aen, enum bfa_aen_category aen_category,
+		     int aen_type, union bfa_aen_data_u *aen_data);
+
+s32 bfa_aen_fetch(struct bfa_aen_s *aen, struct bfa_aen_entry_s *aen_entry,
+		      s32 entry_space, s32 rii, s32 *ri_arr,
+		      s32 ri_arr_cnt);
+
+s32 bfa_aen_get_inst(struct bfa_aen_s *aen);
+
+#endif /* __BFA_AEN_H__ */
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h b/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h
new file mode 100644
index 000000000000..260d3ea1cab3
--- /dev/null
+++ b/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_ADAPTER Module */
+#ifndef	__bfa_aen_adapter_h__
+#define	__bfa_aen_adapter_h__
+
+#include  <cs/bfa_log.h>
+#include  <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_ADAPTER_ADD \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_ADD)
+#define BFA_AEN_ADAPTER_REMOVE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_REMOVE)
+
+#endif
+
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_audit.h b/drivers/scsi/bfa/include/aen/bfa_aen_audit.h
new file mode 100644
index 000000000000..12cd7aab5d53
--- /dev/null
+++ b/drivers/scsi/bfa/include/aen/bfa_aen_audit.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_AUDIT Module */
+#ifndef	__bfa_aen_audit_h__
+#define	__bfa_aen_audit_h__
+
+#include  <cs/bfa_log.h>
+#include  <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_AUDIT_AUTH_ENABLE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_ENABLE)
+#define BFA_AEN_AUDIT_AUTH_DISABLE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_DISABLE)
+
+#endif
+
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h b/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h
new file mode 100644
index 000000000000..507d0b58d149
--- /dev/null
+++ b/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_ETHPORT Module */
+#ifndef	__bfa_aen_ethport_h__
+#define	__bfa_aen_ethport_h__
+
+#include  <cs/bfa_log.h>
+#include  <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_ETHPORT_LINKUP \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKUP)
+#define BFA_AEN_ETHPORT_LINKDOWN \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKDOWN)
+#define BFA_AEN_ETHPORT_ENABLE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_ENABLE)
+#define BFA_AEN_ETHPORT_DISABLE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_DISABLE)
+
+#endif
+
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h b/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h
new file mode 100644
index 000000000000..71378b446b69
--- /dev/null
+++ b/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_IOC Module */
+#ifndef	__bfa_aen_ioc_h__
+#define	__bfa_aen_ioc_h__
+
+#include  <cs/bfa_log.h>
+#include  <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_IOC_HBGOOD \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBGOOD)
+#define BFA_AEN_IOC_HBFAIL \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBFAIL)
+#define BFA_AEN_IOC_ENABLE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_ENABLE)
+#define BFA_AEN_IOC_DISABLE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_DISABLE)
+#define BFA_AEN_IOC_FWMISMATCH \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_FWMISMATCH)
+
+#endif
+
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h b/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h
new file mode 100644
index 000000000000..a7d8ddcfef99
--- /dev/null
+++ b/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_ITNIM Module */
+#ifndef	__bfa_aen_itnim_h__
+#define	__bfa_aen_itnim_h__
+
+#include  <cs/bfa_log.h>
+#include  <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_ITNIM_ONLINE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_ONLINE)
+#define BFA_AEN_ITNIM_OFFLINE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_OFFLINE)
+#define BFA_AEN_ITNIM_DISCONNECT \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_DISCONNECT)
+
+#endif
+
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_lport.h b/drivers/scsi/bfa/include/aen/bfa_aen_lport.h
new file mode 100644
index 000000000000..5a8ebb65193f
--- /dev/null
+++ b/drivers/scsi/bfa/include/aen/bfa_aen_lport.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_LPORT Module */
+#ifndef	__bfa_aen_lport_h__
+#define	__bfa_aen_lport_h__
+
+#include  <cs/bfa_log.h>
+#include  <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_LPORT_NEW \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW)
+#define BFA_AEN_LPORT_DELETE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE)
+#define BFA_AEN_LPORT_ONLINE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_ONLINE)
+#define BFA_AEN_LPORT_OFFLINE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_OFFLINE)
+#define BFA_AEN_LPORT_DISCONNECT \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DISCONNECT)
+#define BFA_AEN_LPORT_NEW_PROP \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_PROP)
+#define BFA_AEN_LPORT_DELETE_PROP \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_PROP)
+#define BFA_AEN_LPORT_NEW_STANDARD \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_STANDARD)
+#define BFA_AEN_LPORT_DELETE_STANDARD \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_STANDARD)
+#define BFA_AEN_LPORT_NPIV_DUP_WWN \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_DUP_WWN)
+#define BFA_AEN_LPORT_NPIV_FABRIC_MAX \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_FABRIC_MAX)
+#define BFA_AEN_LPORT_NPIV_UNKNOWN \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_UNKNOWN)
+
+#endif
+
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_port.h b/drivers/scsi/bfa/include/aen/bfa_aen_port.h
new file mode 100644
index 000000000000..9add905a622d
--- /dev/null
+++ b/drivers/scsi/bfa/include/aen/bfa_aen_port.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_PORT Module */
+#ifndef	__bfa_aen_port_h__
+#define	__bfa_aen_port_h__
+
+#include  <cs/bfa_log.h>
+#include  <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_PORT_ONLINE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ONLINE)
+#define BFA_AEN_PORT_OFFLINE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_OFFLINE)
+#define BFA_AEN_PORT_RLIR \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_RLIR)
+#define BFA_AEN_PORT_SFP_INSERT \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_INSERT)
+#define BFA_AEN_PORT_SFP_REMOVE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_REMOVE)
+#define BFA_AEN_PORT_SFP_POM \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_POM)
+#define BFA_AEN_PORT_ENABLE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ENABLE)
+#define BFA_AEN_PORT_DISABLE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISABLE)
+#define BFA_AEN_PORT_AUTH_ON \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_ON)
+#define BFA_AEN_PORT_AUTH_OFF \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_OFF)
+#define BFA_AEN_PORT_DISCONNECT \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISCONNECT)
+#define BFA_AEN_PORT_QOS_NEG \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_QOS_NEG)
+#define BFA_AEN_PORT_FABRIC_NAME_CHANGE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_FABRIC_NAME_CHANGE)
+#define BFA_AEN_PORT_SFP_ACCESS_ERROR \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_ACCESS_ERROR)
+#define BFA_AEN_PORT_SFP_UNSUPPORT \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_UNSUPPORT)
+
+#endif
+
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_rport.h b/drivers/scsi/bfa/include/aen/bfa_aen_rport.h
new file mode 100644
index 000000000000..7e4be1fd5e15
--- /dev/null
+++ b/drivers/scsi/bfa/include/aen/bfa_aen_rport.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_RPORT Module */
+#ifndef	__bfa_aen_rport_h__
+#define	__bfa_aen_rport_h__
+
+#include  <cs/bfa_log.h>
+#include  <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_RPORT_ONLINE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_ONLINE)
+#define BFA_AEN_RPORT_OFFLINE \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_OFFLINE)
+#define BFA_AEN_RPORT_DISCONNECT \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_DISCONNECT)
+#define BFA_AEN_RPORT_QOS_PRIO \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_PRIO)
+#define BFA_AEN_RPORT_QOS_FLOWID \
+	BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_FLOWID)
+
+#endif
+
diff --git a/drivers/scsi/bfa/include/bfa.h b/drivers/scsi/bfa/include/bfa.h
new file mode 100644
index 000000000000..64c1412c5703
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfa.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_H__
+#define __BFA_H__
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_debug.h>
+#include <cs/bfa_q.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+#include <cs/bfa_plog.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_iocfc.h>
+#include <aen/bfa_aen.h>
+#include <bfi/bfi.h>
+
+struct bfa_s;
+#include <bfa_intr_priv.h>
+
+struct bfa_pcidev_s;
+
+/**
+ * PCI devices supported by the current BFA
+ */
+struct bfa_pciid_s {
+	u16        device_id;
+	u16        vendor_id;
+};
+
+extern char     bfa_version[];
+
+/**
+ * BFA Power Mgmt Commands
+ */
+enum bfa_pm_cmd {
+	BFA_PM_CTL_D0 = 0,
+	BFA_PM_CTL_D1 = 1,
+	BFA_PM_CTL_D2 = 2,
+	BFA_PM_CTL_D3 = 3,
+};
+
+/**
+ * BFA memory resources
+ */
+enum bfa_mem_type {
+	BFA_MEM_TYPE_KVA = 1,	/*! Kernel Virtual Memory *(non-dma-able) */
+	BFA_MEM_TYPE_DMA = 2,	/*! DMA-able memory */
+	BFA_MEM_TYPE_MAX = BFA_MEM_TYPE_DMA,
+};
+
+struct bfa_mem_elem_s {
+	enum bfa_mem_type mem_type;	/*  see enum bfa_mem_type 	*/
+	u32        mem_len;	/*  Total Length in Bytes	*/
+	u8       	*kva;		/*  kernel virtual address	*/
+	u64        dma;		/*  dma address if DMA memory	*/
+	u8       	*kva_curp;	/*  kva allocation cursor	*/
+	u64        dma_curp;	/*  dma allocation cursor	*/
+};
+
+struct bfa_meminfo_s {
+	struct bfa_mem_elem_s meminfo[BFA_MEM_TYPE_MAX];
+};
+#define bfa_meminfo_kva(_m)	\
+	(_m)->meminfo[BFA_MEM_TYPE_KVA - 1].kva_curp
+#define bfa_meminfo_dma_virt(_m)	\
+	(_m)->meminfo[BFA_MEM_TYPE_DMA - 1].kva_curp
+#define bfa_meminfo_dma_phys(_m)	\
+	(_m)->meminfo[BFA_MEM_TYPE_DMA - 1].dma_curp
+
+/**
+ * Generic Scatter Gather Element used by driver
+ */
+struct bfa_sge_s {
+	u32        sg_len;
+	void           *sg_addr;
+};
+
+#define bfa_sge_to_be(__sge) do {                                          \
+	((u32 *)(__sge))[0] = bfa_os_htonl(((u32 *)(__sge))[0]);      \
+	((u32 *)(__sge))[1] = bfa_os_htonl(((u32 *)(__sge))[1]);      \
+	((u32 *)(__sge))[2] = bfa_os_htonl(((u32 *)(__sge))[2]);      \
+} while (0)
+
+
+/*
+ * bfa stats interfaces
+ */
+#define bfa_stats(_mod, _stats)	(_mod)->stats._stats ++
+
+#define bfa_ioc_get_stats(__bfa, __ioc_stats)	\
+	bfa_ioc_fetch_stats(&(__bfa)->ioc, __ioc_stats)
+#define bfa_ioc_clear_stats(__bfa)	\
+	bfa_ioc_clr_stats(&(__bfa)->ioc)
+
+/*
+ * bfa API functions
+ */
+void bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids);
+void bfa_cfg_get_default(struct bfa_iocfc_cfg_s *cfg);
+void bfa_cfg_get_min(struct bfa_iocfc_cfg_s *cfg);
+void bfa_cfg_get_meminfo(struct bfa_iocfc_cfg_s *cfg,
+			struct bfa_meminfo_s *meminfo);
+void bfa_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+			struct bfa_meminfo_s *meminfo,
+			struct bfa_pcidev_s *pcidev);
+void bfa_init_trc(struct bfa_s *bfa, struct bfa_trc_mod_s *trcmod);
+void bfa_init_log(struct bfa_s *bfa, struct bfa_log_mod_s *logmod);
+void bfa_init_aen(struct bfa_s *bfa, struct bfa_aen_s *aen);
+void bfa_init_plog(struct bfa_s *bfa, struct bfa_plog_s *plog);
+void bfa_detach(struct bfa_s *bfa);
+void bfa_init(struct bfa_s *bfa);
+void bfa_start(struct bfa_s *bfa);
+void bfa_stop(struct bfa_s *bfa);
+void bfa_attach_fcs(struct bfa_s *bfa);
+void bfa_cb_init(void *bfad, bfa_status_t status);
+void bfa_cb_stop(void *bfad, bfa_status_t status);
+void bfa_cb_updateq(void *bfad, bfa_status_t status);
+
+bfa_boolean_t bfa_intx(struct bfa_s *bfa);
+void bfa_isr_enable(struct bfa_s *bfa);
+void bfa_isr_disable(struct bfa_s *bfa);
+void bfa_msix_getvecs(struct bfa_s *bfa, u32 *msix_vecs_bmap,
+			u32 *num_vecs, u32 *max_vec_bit);
+#define bfa_msix(__bfa, __vec) (__bfa)->msix.handler[__vec](__bfa, __vec)
+
+void bfa_comp_deq(struct bfa_s *bfa, struct list_head *comp_q);
+void bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q);
+void bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q);
+
+typedef void (*bfa_cb_ioc_t) (void *cbarg, enum bfa_status status);
+void bfa_iocfc_get_attr(struct bfa_s *bfa, struct bfa_iocfc_attr_s *attr);
+bfa_status_t bfa_iocfc_get_stats(struct bfa_s *bfa,
+			struct bfa_iocfc_stats_s *stats,
+			bfa_cb_ioc_t cbfn, void *cbarg);
+bfa_status_t bfa_iocfc_clear_stats(struct bfa_s *bfa,
+			bfa_cb_ioc_t cbfn, void *cbarg);
+void bfa_get_attr(struct bfa_s *bfa, struct bfa_ioc_attr_s *ioc_attr);
+
+void bfa_adapter_get_attr(struct bfa_s *bfa,
+			struct bfa_adapter_attr_s *ad_attr);
+u64 bfa_adapter_get_id(struct bfa_s *bfa);
+
+bfa_status_t bfa_iocfc_israttr_set(struct bfa_s *bfa,
+			struct bfa_iocfc_intr_attr_s *attr);
+
+void bfa_iocfc_enable(struct bfa_s *bfa);
+void bfa_iocfc_disable(struct bfa_s *bfa);
+void bfa_ioc_auto_recover(bfa_boolean_t auto_recover);
+void bfa_cb_ioc_disable(void *bfad);
+void bfa_timer_tick(struct bfa_s *bfa);
+#define bfa_timer_start(_bfa, _timer, _timercb, _arg, _timeout)	\
+	bfa_timer_begin(&(_bfa)->timer_mod, _timer, _timercb, _arg, _timeout)
+
+/*
+ * BFA debug API functions
+ */
+bfa_status_t bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen);
+bfa_status_t bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen);
+
+#include "bfa_priv.h"
+
+#endif /* __BFA_H__ */
diff --git a/drivers/scsi/bfa/include/bfa_fcpim.h b/drivers/scsi/bfa/include/bfa_fcpim.h
new file mode 100644
index 000000000000..04789795fa53
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfa_fcpim.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCPIM_H__
+#define __BFA_FCPIM_H__
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_fcpim.h>
+#include <defs/bfa_defs_fcpim.h>
+
+/*
+ * forward declarations
+ */
+struct bfa_itnim_s;
+struct bfa_ioim_s;
+struct bfa_tskim_s;
+struct bfad_ioim_s;
+struct bfad_tskim_s;
+
+/*
+ * bfa fcpim module API functions
+ */
+void		bfa_fcpim_path_tov_set(struct bfa_s *bfa, u16 path_tov);
+u16	bfa_fcpim_path_tov_get(struct bfa_s *bfa);
+void		bfa_fcpim_qdepth_set(struct bfa_s *bfa, u16 q_depth);
+u16	bfa_fcpim_qdepth_get(struct bfa_s *bfa);
+bfa_status_t bfa_fcpim_get_modstats(struct bfa_s *bfa,
+			struct bfa_fcpim_stats_s *modstats);
+bfa_status_t bfa_fcpim_clr_modstats(struct bfa_s *bfa);
+
+/*
+ * bfa itnim API functions
+ */
+struct bfa_itnim_s *bfa_itnim_create(struct bfa_s *bfa,
+					struct bfa_rport_s *rport, void *itnim);
+void		bfa_itnim_delete(struct bfa_itnim_s *itnim);
+void		bfa_itnim_online(struct bfa_itnim_s *itnim,
+				 bfa_boolean_t seq_rec);
+void		bfa_itnim_offline(struct bfa_itnim_s *itnim);
+void		bfa_itnim_get_stats(struct bfa_itnim_s *itnim,
+			struct bfa_itnim_hal_stats_s *stats);
+void		bfa_itnim_clear_stats(struct bfa_itnim_s *itnim);
+
+
+/**
+ * 		BFA completion callback for bfa_itnim_online().
+ *
+ * @param[in]		itnim		FCS or driver itnim instance
+ *
+ * return None
+ */
+void            bfa_cb_itnim_online(void *itnim);
+
+/**
+ * 		BFA completion callback for bfa_itnim_offline().
+ *
+ * @param[in]		itnim		FCS or driver itnim instance
+ *
+ * return None
+ */
+void            bfa_cb_itnim_offline(void *itnim);
+void            bfa_cb_itnim_tov_begin(void *itnim);
+void            bfa_cb_itnim_tov(void *itnim);
+
+/**
+ * 		BFA notification to FCS/driver for second level error recovery.
+ *
+ * Atleast one I/O request has timedout and target is unresponsive to
+ * repeated abort requests. Second level error recovery should be initiated
+ * by starting implicit logout and recovery procedures.
+ *
+ * @param[in]		itnim		FCS or driver itnim instance
+ *
+ * return None
+ */
+void            bfa_cb_itnim_sler(void *itnim);
+
+/*
+ * bfa ioim API functions
+ */
+struct bfa_ioim_s	*bfa_ioim_alloc(struct bfa_s *bfa,
+					struct bfad_ioim_s *dio,
+					struct bfa_itnim_s *itnim,
+					u16 nsgles);
+
+void		bfa_ioim_free(struct bfa_ioim_s *ioim);
+void		bfa_ioim_start(struct bfa_ioim_s *ioim);
+void		bfa_ioim_abort(struct bfa_ioim_s *ioim);
+void 		bfa_ioim_delayed_comp(struct bfa_ioim_s *ioim,
+				      bfa_boolean_t iotov);
+
+
+/**
+ * 		I/O completion notification.
+ *
+ * @param[in]		dio			driver IO structure
+ * @param[in]		io_status		IO completion status
+ * @param[in]		scsi_status		SCSI status returned by target
+ * @param[in]		sns_len			SCSI sense length, 0 if none
+ * @param[in]		sns_info		SCSI sense data, if any
+ * @param[in]		residue			Residual length
+ *
+ * @return None
+ */
+void            bfa_cb_ioim_done(void *bfad, struct bfad_ioim_s *dio,
+				  enum bfi_ioim_status io_status,
+				  u8 scsi_status, int sns_len,
+				  u8 *sns_info, s32 residue);
+
+/**
+ * 		I/O good completion notification.
+ *
+ * @param[in]		dio			driver IO structure
+ *
+ * @return None
+ */
+void            bfa_cb_ioim_good_comp(void *bfad, struct bfad_ioim_s *dio);
+
+/**
+ * 		I/O abort completion notification
+ *
+ * @param[in]		dio			driver IO that was aborted
+ *
+ * @return None
+ */
+void            bfa_cb_ioim_abort(void *bfad, struct bfad_ioim_s *dio);
+void		bfa_cb_ioim_resfree(void *hcb_bfad);
+
+void 			bfa_cb_ioim_resfree(void *hcb_bfad);
+
+/*
+ * bfa tskim API functions
+ */
+struct bfa_tskim_s	*bfa_tskim_alloc(struct bfa_s *bfa,
+					struct bfad_tskim_s *dtsk);
+void		bfa_tskim_free(struct bfa_tskim_s *tskim);
+void		bfa_tskim_start(struct bfa_tskim_s *tskim,
+				struct bfa_itnim_s *itnim, lun_t lun,
+				enum fcp_tm_cmnd tm, u8 t_secs);
+void		bfa_cb_tskim_done(void *bfad, struct bfad_tskim_s *dtsk,
+				  enum bfi_tskim_status tsk_status);
+
+#endif /* __BFA_FCPIM_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfa_fcptm.h b/drivers/scsi/bfa/include/bfa_fcptm.h
new file mode 100644
index 000000000000..5f5ffe0bb1bb
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfa_fcptm.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCPTM_H__
+#define __BFA_FCPTM_H__
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_fcptm.h>
+
+/*
+ * forward declarations
+ */
+struct bfa_tin_s;
+struct bfa_iotm_s;
+struct bfa_tsktm_s;
+
+/*
+ * bfa fcptm module API functions
+ */
+void bfa_fcptm_path_tov_set(struct bfa_s *bfa, u16 path_tov);
+u16 bfa_fcptm_path_tov_get(struct bfa_s *bfa);
+void bfa_fcptm_qdepth_set(struct bfa_s *bfa, u16 q_depth);
+u16 bfa_fcptm_qdepth_get(struct bfa_s *bfa);
+
+/*
+ * bfa tin API functions
+ */
+void bfa_tin_get_stats(struct bfa_tin_s *tin, struct bfa_tin_stats_s *stats);
+void bfa_tin_clear_stats(struct bfa_tin_s *tin);
+
+#endif /* __BFA_FCPTM_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfa_svc.h b/drivers/scsi/bfa/include/bfa_svc.h
new file mode 100644
index 000000000000..0c80b74f72ef
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfa_svc.h
@@ -0,0 +1,324 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_SVC_H__
+#define __BFA_SVC_H__
+
+/*
+ * forward declarations
+ */
+struct bfa_fcxp_s;
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_rport.h>
+#include <defs/bfa_defs_qos.h>
+#include <cs/bfa_sm.h>
+#include <bfa.h>
+
+/**
+ * 		BFA rport information.
+ */
+struct bfa_rport_info_s {
+	u16        max_frmsz;	/*  max rcv pdu size               */
+	u32        pid : 24,	/*  remote port ID                 */
+			lp_tag : 8;
+	u32        local_pid : 24,	/*  local port ID		    */
+			cisc : 8;	/*  CIRO supported		    */
+	u8         fc_class;	/*  supported FC classes. enum fc_cos */
+	u8         vf_en;		/*  virtual fabric enable          */
+	u16        vf_id;		/*  virtual fabric ID              */
+	enum bfa_pport_speed speed;	/*  Rport's current speed	    */
+};
+
+/**
+ * BFA rport data structure
+ */
+struct bfa_rport_s {
+	struct list_head        qe;	  /*  queue element */
+	bfa_sm_t	      sm; 	  /*  state machine */
+	struct bfa_s          *bfa;	  /*  backpointer to BFA */
+	void                  *rport_drv; /*  fcs/driver rport object */
+	u16              fw_handle; /*  firmware rport handle */
+	u16              rport_tag; /*  BFA rport tag */
+	struct bfa_rport_info_s rport_info; /*  rport info from *fcs/driver */
+	struct bfa_reqq_wait_s reqq_wait; /*  to wait for room in reqq */
+	struct bfa_cb_qe_s    hcb_qe;	 /*  BFA callback qelem */
+	struct bfa_rport_hal_stats_s stats; /*  BFA rport statistics  */
+	struct bfa_rport_qos_attr_s  qos_attr;
+	union a {
+		bfa_status_t    status;	 /*  f/w status */
+		void            *fw_msg; /*  QoS scn event */
+	} event_arg;
+};
+#define BFA_RPORT_FC_COS(_rport)	((_rport)->rport_info.fc_class)
+
+/**
+ * Send completion callback.
+ */
+typedef void (*bfa_cb_fcxp_send_t) (void *bfad_fcxp, struct bfa_fcxp_s *fcxp,
+			void *cbarg, enum bfa_status req_status,
+			u32 rsp_len, u32 resid_len,
+			struct fchs_s *rsp_fchs);
+
+/**
+ * BFA fcxp allocation (asynchronous)
+ */
+typedef void (*bfa_fcxp_alloc_cbfn_t) (void *cbarg, struct bfa_fcxp_s *fcxp);
+
+struct bfa_fcxp_wqe_s {
+	struct list_head         qe;
+	bfa_fcxp_alloc_cbfn_t  alloc_cbfn;
+	void           *alloc_cbarg;
+};
+
+typedef u64 (*bfa_fcxp_get_sgaddr_t) (void *bfad_fcxp, int sgeid);
+typedef u32 (*bfa_fcxp_get_sglen_t) (void *bfad_fcxp, int sgeid);
+
+#define BFA_UF_BUFSZ	(2 * 1024 + 256)
+
+/**
+ * @todo private
+ */
+struct bfa_uf_buf_s {
+	u8         d[BFA_UF_BUFSZ];
+};
+
+
+struct bfa_uf_s {
+	struct list_head	qe;		/*  queue element	  */
+	struct bfa_s	*bfa;		/*  bfa instance	  */
+	u16        uf_tag;		/*  identifying tag f/w messages */
+	u16        vf_id;
+	u16        src_rport_handle;
+	u16        rsvd;
+	u8        	*data_ptr;
+	u16        data_len;	/*  actual receive length	  */
+	u16        pb_len;		/*  posted buffer length	  */
+	void           	*buf_kva;	/*  buffer virtual address	  */
+	u64        buf_pa;		/*  buffer physical address	  */
+	struct bfa_cb_qe_s    hcb_qe;	/*  comp: BFA comp qelem	  */
+	struct bfa_sge_s   	sges[BFI_SGE_INLINE_MAX];
+};
+
+typedef void (*bfa_cb_pport_t) (void *cbarg, enum bfa_status status);
+
+/**
+ * bfa lport login/logout service interface
+ */
+struct bfa_lps_s {
+	struct list_head	qe;		/*  queue element */
+	struct bfa_s	*bfa;		/*  parent bfa instance	*/
+	bfa_sm_t	sm;		/*  finite state machine	*/
+	u8		lp_tag;		/*  lport tag			*/
+	u8		reqq;		/*  lport request queue	*/
+	u8		alpa;		/*  ALPA for loop topologies	*/
+	u32	lp_pid;		/*  lport port ID		*/
+	bfa_boolean_t	fdisc;		/*  send FDISC instead of FLOGI*/
+	bfa_boolean_t	auth_en;	/*  enable authentication	*/
+	bfa_boolean_t	auth_req;	/*  authentication required	*/
+	bfa_boolean_t	npiv_en;	/*  NPIV is allowed by peer	*/
+	bfa_boolean_t	fport;		/*  attached peer is F_PORT	*/
+	bfa_boolean_t	brcd_switch;/*  attached peer is brcd switch	*/
+	bfa_status_t	status;		/*  login status		*/
+	u16	pdusz;		/*  max receive PDU size 	*/
+	u16	pr_bbcred;	/*  BB_CREDIT from peer 	*/
+	u8		lsrjt_rsn;	/*  LSRJT reason		*/
+	u8		lsrjt_expl;	/*  LSRJT explanation		*/
+	wwn_t		pwwn;		/*  port wwn of lport		*/
+	wwn_t		nwwn;		/*  node wwn of lport		*/
+	wwn_t		pr_pwwn;	/*  port wwn of lport peer	*/
+	wwn_t		pr_nwwn;	/*  node wwn of lport peer	*/
+	mac_t		lp_mac;		/*  fpma/spma MAC for lport	*/
+	mac_t		fcf_mac;	/*  FCF MAC of lport		*/
+	struct bfa_reqq_wait_s	wqe;	/*  request wait queue element	*/
+	void		*uarg;		/*  user callback arg		*/
+	struct bfa_cb_qe_s hcb_qe;	/*  comp: callback qelem	*/
+	struct bfi_lps_login_rsp_s *loginrsp;
+	bfa_eproto_status_t	ext_status;
+};
+
+/*
+ * bfa pport API functions
+ */
+bfa_status_t bfa_pport_enable(struct bfa_s *bfa);
+bfa_status_t bfa_pport_disable(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_speed(struct bfa_s *bfa,
+			enum bfa_pport_speed speed);
+enum bfa_pport_speed bfa_pport_get_speed(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_topology(struct bfa_s *bfa,
+			enum bfa_pport_topology topo);
+enum bfa_pport_topology bfa_pport_get_topology(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa);
+bfa_boolean_t bfa_pport_get_hardalpa(struct bfa_s *bfa, u8 *alpa);
+u8 bfa_pport_get_myalpa(struct bfa_s *bfa);
+bfa_status_t bfa_pport_clr_hardalpa(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxsize);
+u16 bfa_pport_get_maxfrsize(struct bfa_s *bfa);
+u32 bfa_pport_mypid(struct bfa_s *bfa);
+u8 bfa_pport_get_rx_bbcredit(struct bfa_s *bfa);
+bfa_status_t bfa_pport_trunk_enable(struct bfa_s *bfa, u8 bitmap);
+bfa_status_t bfa_pport_trunk_disable(struct bfa_s *bfa);
+bfa_boolean_t bfa_pport_trunk_query(struct bfa_s *bfa, u32 *bitmap);
+void bfa_pport_get_attr(struct bfa_s *bfa, struct bfa_pport_attr_s *attr);
+wwn_t bfa_pport_get_wwn(struct bfa_s *bfa, bfa_boolean_t node);
+bfa_status_t bfa_pport_get_stats(struct bfa_s *bfa,
+			union bfa_pport_stats_u *stats,
+			bfa_cb_pport_t cbfn, void *cbarg);
+bfa_status_t bfa_pport_clear_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
+			void *cbarg);
+void bfa_pport_event_register(struct bfa_s *bfa,
+			void (*event_cbfn) (void *cbarg,
+			bfa_pport_event_t event), void *event_cbarg);
+bfa_boolean_t bfa_pport_is_disabled(struct bfa_s *bfa);
+void bfa_pport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off);
+void bfa_pport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off);
+bfa_status_t bfa_pport_cfg_ratelim_speed(struct bfa_s *bfa,
+			enum bfa_pport_speed speed);
+enum bfa_pport_speed bfa_pport_get_ratelim_speed(struct bfa_s *bfa);
+
+void bfa_pport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit);
+void bfa_pport_busy(struct bfa_s *bfa, bfa_boolean_t status);
+void bfa_pport_beacon(struct bfa_s *bfa, bfa_boolean_t beacon,
+			bfa_boolean_t link_e2e_beacon);
+void bfa_cb_pport_event(void *cbarg, bfa_pport_event_t event);
+void bfa_pport_qos_get_attr(struct bfa_s *bfa, struct bfa_qos_attr_s *qos_attr);
+void bfa_pport_qos_get_vc_attr(struct bfa_s *bfa,
+			struct bfa_qos_vc_attr_s *qos_vc_attr);
+bfa_status_t bfa_pport_get_qos_stats(struct bfa_s *bfa,
+			union bfa_pport_stats_u *stats,
+			bfa_cb_pport_t cbfn, void *cbarg);
+bfa_status_t bfa_pport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
+			void *cbarg);
+bfa_boolean_t     bfa_pport_is_ratelim(struct bfa_s *bfa);
+bfa_boolean_t	bfa_pport_is_linkup(struct bfa_s *bfa);
+
+/*
+ * bfa rport API functions
+ */
+struct bfa_rport_s *bfa_rport_create(struct bfa_s *bfa, void *rport_drv);
+void bfa_rport_delete(struct bfa_rport_s *rport);
+void bfa_rport_online(struct bfa_rport_s *rport,
+			struct bfa_rport_info_s *rport_info);
+void bfa_rport_offline(struct bfa_rport_s *rport);
+void bfa_rport_speed(struct bfa_rport_s *rport, enum bfa_pport_speed speed);
+void bfa_rport_get_stats(struct bfa_rport_s *rport,
+			struct bfa_rport_hal_stats_s *stats);
+void bfa_rport_clear_stats(struct bfa_rport_s *rport);
+void bfa_cb_rport_online(void *rport);
+void bfa_cb_rport_offline(void *rport);
+void bfa_cb_rport_qos_scn_flowid(void *rport,
+			struct bfa_rport_qos_attr_s old_qos_attr,
+			struct bfa_rport_qos_attr_s new_qos_attr);
+void bfa_cb_rport_qos_scn_prio(void *rport,
+			struct bfa_rport_qos_attr_s old_qos_attr,
+			struct bfa_rport_qos_attr_s new_qos_attr);
+void bfa_rport_get_qos_attr(struct bfa_rport_s *rport,
+			struct bfa_rport_qos_attr_s *qos_attr);
+
+/*
+ * bfa fcxp API functions
+ */
+struct bfa_fcxp_s *bfa_fcxp_alloc(void *bfad_fcxp, struct bfa_s *bfa,
+			int nreq_sgles, int nrsp_sgles,
+			bfa_fcxp_get_sgaddr_t get_req_sga,
+			bfa_fcxp_get_sglen_t get_req_sglen,
+			bfa_fcxp_get_sgaddr_t get_rsp_sga,
+			bfa_fcxp_get_sglen_t get_rsp_sglen);
+void bfa_fcxp_alloc_wait(struct bfa_s *bfa, struct bfa_fcxp_wqe_s *wqe,
+			bfa_fcxp_alloc_cbfn_t alloc_cbfn, void *cbarg);
+void bfa_fcxp_walloc_cancel(struct bfa_s *bfa,
+			struct bfa_fcxp_wqe_s *wqe);
+void bfa_fcxp_discard(struct bfa_fcxp_s *fcxp);
+
+void *bfa_fcxp_get_reqbuf(struct bfa_fcxp_s *fcxp);
+void *bfa_fcxp_get_rspbuf(struct bfa_fcxp_s *fcxp);
+
+void bfa_fcxp_free(struct bfa_fcxp_s *fcxp);
+
+void bfa_fcxp_send(struct bfa_fcxp_s *fcxp,
+			struct bfa_rport_s *rport, u16 vf_id, u8 lp_tag,
+			bfa_boolean_t cts, enum fc_cos cos,
+			u32 reqlen, struct fchs_s *fchs,
+			bfa_cb_fcxp_send_t cbfn,
+			void *cbarg,
+			u32 rsp_maxlen, u8 rsp_timeout);
+bfa_status_t bfa_fcxp_abort(struct bfa_fcxp_s *fcxp);
+u32        bfa_fcxp_get_reqbufsz(struct bfa_fcxp_s *fcxp);
+u32	bfa_fcxp_get_maxrsp(struct bfa_s *bfa);
+
+static inline void *
+bfa_uf_get_frmbuf(struct bfa_uf_s *uf)
+{
+	return uf->data_ptr;
+}
+
+static inline   u16
+bfa_uf_get_frmlen(struct bfa_uf_s *uf)
+{
+	return uf->data_len;
+}
+
+/**
+ *      Callback prototype for unsolicited frame receive handler.
+ *
+ * @param[in]           cbarg           callback arg for receive handler
+ * @param[in]           uf              unsolicited frame descriptor
+ *
+ * @return None
+ */
+typedef void (*bfa_cb_uf_recv_t) (void *cbarg, struct bfa_uf_s *uf);
+
+/*
+ * bfa uf API functions
+ */
+void bfa_uf_recv_register(struct bfa_s *bfa, bfa_cb_uf_recv_t ufrecv,
+			void *cbarg);
+void bfa_uf_free(struct bfa_uf_s *uf);
+
+/**
+ * bfa lport service api
+ */
+
+struct bfa_lps_s *bfa_lps_alloc(struct bfa_s *bfa);
+void bfa_lps_delete(struct bfa_lps_s *lps);
+void bfa_lps_discard(struct bfa_lps_s *lps);
+void bfa_lps_flogi(struct bfa_lps_s *lps, void *uarg, u8 alpa, u16 pdusz,
+		   wwn_t pwwn, wwn_t nwwn, bfa_boolean_t auth_en);
+void bfa_lps_fdisc(struct bfa_lps_s *lps, void *uarg, u16 pdusz, wwn_t pwwn,
+		   wwn_t nwwn);
+void bfa_lps_flogo(struct bfa_lps_s *lps);
+void bfa_lps_fdisclogo(struct bfa_lps_s *lps);
+u8 bfa_lps_get_tag(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_npiv_en(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_fport(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_brcd_fabric(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_authreq(struct bfa_lps_s *lps);
+bfa_eproto_status_t bfa_lps_get_extstatus(struct bfa_lps_s *lps);
+u32 bfa_lps_get_pid(struct bfa_lps_s *lps);
+u8 bfa_lps_get_tag_from_pid(struct bfa_s *bfa, u32 pid);
+u16 bfa_lps_get_peer_bbcredit(struct bfa_lps_s *lps);
+wwn_t bfa_lps_get_peer_pwwn(struct bfa_lps_s *lps);
+wwn_t bfa_lps_get_peer_nwwn(struct bfa_lps_s *lps);
+u8 bfa_lps_get_lsrjt_rsn(struct bfa_lps_s *lps);
+u8 bfa_lps_get_lsrjt_expl(struct bfa_lps_s *lps);
+void bfa_cb_lps_flogi_comp(void *bfad, void *uarg, bfa_status_t status);
+void bfa_cb_lps_flogo_comp(void *bfad, void *uarg);
+void bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status);
+void bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg);
+
+#endif /* __BFA_SVC_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfa_timer.h b/drivers/scsi/bfa/include/bfa_timer.h
new file mode 100644
index 000000000000..e407103fa565
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfa_timer.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_TIMER_H__
+#define __BFA_TIMER_H__
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_q.h>
+
+struct bfa_s;
+
+typedef void (*bfa_timer_cbfn_t)(void *);
+
+/**
+ * BFA timer data structure
+ */
+struct bfa_timer_s {
+	struct list_head	qe;
+	bfa_timer_cbfn_t timercb;
+	void            *arg;
+	int             timeout;	/**< in millisecs. */
+};
+
+/**
+ * Timer module structure
+ */
+struct bfa_timer_mod_s {
+	struct list_head timer_q;
+};
+
+#define BFA_TIMER_FREQ 500 /**< specified in millisecs */
+
+void bfa_timer_beat(struct bfa_timer_mod_s *mod);
+void bfa_timer_init(struct bfa_timer_mod_s *mod);
+void bfa_timer_begin(struct bfa_timer_mod_s *mod, struct bfa_timer_s *timer,
+			bfa_timer_cbfn_t timercb, void *arg,
+			unsigned int timeout);
+void bfa_timer_stop(struct bfa_timer_s *timer);
+
+#endif /* __BFA_TIMER_H__ */
diff --git a/drivers/scsi/bfa/include/bfi/bfi.h b/drivers/scsi/bfa/include/bfi/bfi.h
new file mode 100644
index 000000000000..6cadfe0d4ba1
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi.h
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_H__
+#define __BFI_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_status.h>
+
+#pragma pack(1)
+
+/**
+ * Msg header common to all msgs
+ */
+struct bfi_mhdr_s {
+	u8         msg_class;	/*  @ref bfi_mclass_t	    */
+	u8         msg_id;		/*  msg opcode with in the class   */
+	union {
+		struct {
+			u8         rsvd;
+			u8         lpu_id;	/*  msg destination	    */
+		} h2i;
+		u16        i2htok;	/*  token in msgs to host	    */
+	} mtag;
+};
+
+#define bfi_h2i_set(_mh, _mc, _op, _lpuid) do {		\
+	(_mh).msg_class 		= (_mc);      \
+	(_mh).msg_id			= (_op);      \
+	(_mh).mtag.h2i.lpu_id	= (_lpuid);      \
+} while (0)
+
+#define bfi_i2h_set(_mh, _mc, _op, _i2htok) do {		\
+	(_mh).msg_class 		= (_mc);      \
+	(_mh).msg_id			= (_op);      \
+	(_mh).mtag.i2htok		= (_i2htok);      \
+} while (0)
+
+/*
+ * Message opcodes: 0-127 to firmware, 128-255 to host
+ */
+#define BFI_I2H_OPCODE_BASE	128
+#define BFA_I2HM(_x) 			((_x) + BFI_I2H_OPCODE_BASE)
+
+/**
+ ****************************************************************************
+ *
+ * Scatter Gather Element and Page definition
+ *
+ ****************************************************************************
+ */
+
+#define BFI_SGE_INLINE	1
+#define BFI_SGE_INLINE_MAX	(BFI_SGE_INLINE + 1)
+
+/**
+ * SG Flags
+ */
+enum {
+	BFI_SGE_DATA	= 0,	/*  data address, not last	     */
+	BFI_SGE_DATA_CPL	= 1,	/*  data addr, last in current page */
+	BFI_SGE_DATA_LAST	= 3,	/*  data address, last		     */
+	BFI_SGE_LINK	= 2,	/*  link address		     */
+	BFI_SGE_PGDLEN	= 2,	/*  cumulative data length for page */
+};
+
+/**
+ * DMA addresses
+ */
+union bfi_addr_u {
+	struct {
+		u32        addr_lo;
+		u32        addr_hi;
+	} a32;
+};
+
+/**
+ * Scatter Gather Element
+ */
+struct bfi_sge_s {
+#ifdef __BIGENDIAN
+	u32        flags	: 2,
+			rsvd	: 2,
+			sg_len	: 28;
+#else
+	u32        sg_len	: 28,
+			rsvd	: 2,
+			flags	: 2;
+#endif
+	union bfi_addr_u sga;
+};
+
+/**
+ * Scatter Gather Page
+ */
+#define BFI_SGPG_DATA_SGES		7
+#define BFI_SGPG_SGES_MAX		(BFI_SGPG_DATA_SGES + 1)
+#define BFI_SGPG_RSVD_WD_LEN	8
+struct bfi_sgpg_s {
+	struct bfi_sge_s sges[BFI_SGPG_SGES_MAX];
+	u32	rsvd[BFI_SGPG_RSVD_WD_LEN];
+};
+
+/*
+ * Large Message structure - 128 Bytes size Msgs
+ */
+#define BFI_LMSG_SZ		128
+#define BFI_LMSG_PL_WSZ	\
+			((BFI_LMSG_SZ - sizeof(struct bfi_mhdr_s)) / 4)
+
+struct bfi_msg_s {
+	struct bfi_mhdr_s mhdr;
+	u32	pl[BFI_LMSG_PL_WSZ];
+};
+
+/**
+ * Mailbox message structure
+ */
+#define BFI_MBMSG_SZ		7
+struct bfi_mbmsg_s {
+	struct bfi_mhdr_s	mh;
+	u32		pl[BFI_MBMSG_SZ];
+};
+
+/**
+ * Message Classes
+ */
+enum bfi_mclass {
+	BFI_MC_IOC		= 1,	/*  IO Controller (IOC)	    */
+	BFI_MC_DIAG		= 2,	/*  Diagnostic Msgs		    */
+	BFI_MC_FLASH		= 3,	/*  Flash message class	    */
+	BFI_MC_CEE		= 4,
+	BFI_MC_FC_PORT		= 5,	/*  FC port		   	    */
+	BFI_MC_IOCFC		= 6,	/*  FC - IO Controller (IOC)	    */
+	BFI_MC_LL		= 7,	/*  Link Layer		 	    */
+	BFI_MC_UF		= 8,	/*  Unsolicited frame receive	    */
+	BFI_MC_FCXP		= 9,	/*  FC Transport		    */
+	BFI_MC_LPS		= 10,	/*  lport fc login services	    */
+	BFI_MC_RPORT		= 11,	/*  Remote port		    */
+	BFI_MC_ITNIM		= 12,	/*  I-T nexus (Initiator mode)	    */
+	BFI_MC_IOIM_READ	= 13,	/*  read IO (Initiator mode)	    */
+	BFI_MC_IOIM_WRITE	= 14,	/*  write IO (Initiator mode)	    */
+	BFI_MC_IOIM_IO		= 15,	/*  IO (Initiator mode)	    */
+	BFI_MC_IOIM		= 16,	/*  IO (Initiator mode)	    */
+	BFI_MC_IOIM_IOCOM	= 17,	/*  good IO completion		    */
+	BFI_MC_TSKIM		= 18,	/*  Initiator Task management	    */
+	BFI_MC_SBOOT		= 19,	/*  SAN boot services		    */
+	BFI_MC_IPFC		= 20,	/*  IP over FC Msgs		    */
+	BFI_MC_PORT		= 21,	/*  Physical port		    */
+	BFI_MC_MAX		= 32
+};
+
+#define BFI_IOC_MAX_CQS		4
+#define BFI_IOC_MAX_CQS_ASIC	8
+#define BFI_IOC_MSGLEN_MAX	32	/* 32 bytes */
+
+#pragma pack()
+
+#endif /* __BFI_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_boot.h b/drivers/scsi/bfa/include/bfi/bfi_boot.h
new file mode 100644
index 000000000000..5955afe7d108
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_boot.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * bfi_boot.h
+ */
+
+#ifndef __BFI_BOOT_H__
+#define __BFI_BOOT_H__
+
+#define BFI_BOOT_TYPE_OFF		8
+#define BFI_BOOT_PARAM_OFF		12
+
+#define BFI_BOOT_TYPE_NORMAL 		0	/* param is device id */
+#define	BFI_BOOT_TYPE_FLASH		1
+#define	BFI_BOOT_TYPE_MEMTEST		2
+
+#define BFI_BOOT_MEMTEST_RES_ADDR   0x900
+#define BFI_BOOT_MEMTEST_RES_SIG    0xA0A1A2A3
+
+#endif
diff --git a/drivers/scsi/bfa/include/bfi/bfi_cbreg.h b/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
new file mode 100644
index 000000000000..b3bb52b565b1
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
@@ -0,0 +1,305 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * bfi_cbreg.h crossbow host block register definitions
+ *
+ * !!! Do not edit. Auto generated. !!!
+ */
+
+#ifndef __BFI_CBREG_H__
+#define __BFI_CBREG_H__
+
+
+#define HOSTFN0_INT_STATUS               0x00014000
+#define __HOSTFN0_INT_STATUS_LVL_MK      0x00f00000
+#define __HOSTFN0_INT_STATUS_LVL_SH      20
+#define __HOSTFN0_INT_STATUS_LVL(_v)     ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
+#define __HOSTFN0_INT_STATUS_P           0x000fffff
+#define HOSTFN0_INT_MSK                  0x00014004
+#define HOST_PAGE_NUM_FN0                0x00014008
+#define __HOST_PAGE_NUM_FN               0x000001ff
+#define HOSTFN1_INT_STATUS               0x00014100
+#define __HOSTFN1_INT_STAT_LVL_MK        0x00f00000
+#define __HOSTFN1_INT_STAT_LVL_SH        20
+#define __HOSTFN1_INT_STAT_LVL(_v)       ((_v) << __HOSTFN1_INT_STAT_LVL_SH)
+#define __HOSTFN1_INT_STAT_P             0x000fffff
+#define HOSTFN1_INT_MSK                  0x00014104
+#define HOST_PAGE_NUM_FN1                0x00014108
+#define APP_PLL_400_CTL_REG              0x00014204
+#define __P_400_PLL_LOCK                 0x80000000
+#define __APP_PLL_400_SRAM_USE_100MHZ    0x00100000
+#define __APP_PLL_400_RESET_TIMER_MK     0x000e0000
+#define __APP_PLL_400_RESET_TIMER_SH     17
+#define __APP_PLL_400_RESET_TIMER(_v)    ((_v) << __APP_PLL_400_RESET_TIMER_SH)
+#define __APP_PLL_400_LOGIC_SOFT_RESET   0x00010000
+#define __APP_PLL_400_CNTLMT0_1_MK       0x0000c000
+#define __APP_PLL_400_CNTLMT0_1_SH       14
+#define __APP_PLL_400_CNTLMT0_1(_v)      ((_v) << __APP_PLL_400_CNTLMT0_1_SH)
+#define __APP_PLL_400_JITLMT0_1_MK       0x00003000
+#define __APP_PLL_400_JITLMT0_1_SH       12
+#define __APP_PLL_400_JITLMT0_1(_v)      ((_v) << __APP_PLL_400_JITLMT0_1_SH)
+#define __APP_PLL_400_HREF               0x00000800
+#define __APP_PLL_400_HDIV               0x00000400
+#define __APP_PLL_400_P0_1_MK            0x00000300
+#define __APP_PLL_400_P0_1_SH            8
+#define __APP_PLL_400_P0_1(_v)           ((_v) << __APP_PLL_400_P0_1_SH)
+#define __APP_PLL_400_Z0_2_MK            0x000000e0
+#define __APP_PLL_400_Z0_2_SH            5
+#define __APP_PLL_400_Z0_2(_v)           ((_v) << __APP_PLL_400_Z0_2_SH)
+#define __APP_PLL_400_RSEL200500         0x00000010
+#define __APP_PLL_400_ENARST             0x00000008
+#define __APP_PLL_400_BYPASS             0x00000004
+#define __APP_PLL_400_LRESETN            0x00000002
+#define __APP_PLL_400_ENABLE             0x00000001
+#define APP_PLL_212_CTL_REG              0x00014208
+#define __P_212_PLL_LOCK                 0x80000000
+#define __APP_PLL_212_RESET_TIMER_MK     0x000e0000
+#define __APP_PLL_212_RESET_TIMER_SH     17
+#define __APP_PLL_212_RESET_TIMER(_v)    ((_v) << __APP_PLL_212_RESET_TIMER_SH)
+#define __APP_PLL_212_LOGIC_SOFT_RESET   0x00010000
+#define __APP_PLL_212_CNTLMT0_1_MK       0x0000c000
+#define __APP_PLL_212_CNTLMT0_1_SH       14
+#define __APP_PLL_212_CNTLMT0_1(_v)      ((_v) << __APP_PLL_212_CNTLMT0_1_SH)
+#define __APP_PLL_212_JITLMT0_1_MK       0x00003000
+#define __APP_PLL_212_JITLMT0_1_SH       12
+#define __APP_PLL_212_JITLMT0_1(_v)      ((_v) << __APP_PLL_212_JITLMT0_1_SH)
+#define __APP_PLL_212_HREF               0x00000800
+#define __APP_PLL_212_HDIV               0x00000400
+#define __APP_PLL_212_P0_1_MK            0x00000300
+#define __APP_PLL_212_P0_1_SH            8
+#define __APP_PLL_212_P0_1(_v)           ((_v) << __APP_PLL_212_P0_1_SH)
+#define __APP_PLL_212_Z0_2_MK            0x000000e0
+#define __APP_PLL_212_Z0_2_SH            5
+#define __APP_PLL_212_Z0_2(_v)           ((_v) << __APP_PLL_212_Z0_2_SH)
+#define __APP_PLL_212_RSEL200500         0x00000010
+#define __APP_PLL_212_ENARST             0x00000008
+#define __APP_PLL_212_BYPASS             0x00000004
+#define __APP_PLL_212_LRESETN            0x00000002
+#define __APP_PLL_212_ENABLE             0x00000001
+#define HOST_SEM0_REG                    0x00014230
+#define __HOST_SEMAPHORE                 0x00000001
+#define HOST_SEM1_REG                    0x00014234
+#define HOST_SEM2_REG                    0x00014238
+#define HOST_SEM3_REG                    0x0001423c
+#define HOST_SEM0_INFO_REG               0x00014240
+#define HOST_SEM1_INFO_REG               0x00014244
+#define HOST_SEM2_INFO_REG               0x00014248
+#define HOST_SEM3_INFO_REG               0x0001424c
+#define HOSTFN0_LPU0_CMD_STAT            0x00019000
+#define __HOSTFN0_LPU0_MBOX_INFO_MK      0xfffffffe
+#define __HOSTFN0_LPU0_MBOX_INFO_SH      1
+#define __HOSTFN0_LPU0_MBOX_INFO(_v)     ((_v) << __HOSTFN0_LPU0_MBOX_INFO_SH)
+#define __HOSTFN0_LPU0_MBOX_CMD_STATUS   0x00000001
+#define LPU0_HOSTFN0_CMD_STAT            0x00019008
+#define __LPU0_HOSTFN0_MBOX_INFO_MK      0xfffffffe
+#define __LPU0_HOSTFN0_MBOX_INFO_SH      1
+#define __LPU0_HOSTFN0_MBOX_INFO(_v)     ((_v) << __LPU0_HOSTFN0_MBOX_INFO_SH)
+#define __LPU0_HOSTFN0_MBOX_CMD_STATUS   0x00000001
+#define HOSTFN1_LPU1_CMD_STAT            0x00019014
+#define __HOSTFN1_LPU1_MBOX_INFO_MK      0xfffffffe
+#define __HOSTFN1_LPU1_MBOX_INFO_SH      1
+#define __HOSTFN1_LPU1_MBOX_INFO(_v)     ((_v) << __HOSTFN1_LPU1_MBOX_INFO_SH)
+#define __HOSTFN1_LPU1_MBOX_CMD_STATUS   0x00000001
+#define LPU1_HOSTFN1_CMD_STAT            0x0001901c
+#define __LPU1_HOSTFN1_MBOX_INFO_MK      0xfffffffe
+#define __LPU1_HOSTFN1_MBOX_INFO_SH      1
+#define __LPU1_HOSTFN1_MBOX_INFO(_v)     ((_v) << __LPU1_HOSTFN1_MBOX_INFO_SH)
+#define __LPU1_HOSTFN1_MBOX_CMD_STATUS   0x00000001
+#define CPE_Q0_DEPTH                     0x00010014
+#define CPE_Q0_PI                        0x0001001c
+#define CPE_Q0_CI                        0x00010020
+#define CPE_Q1_DEPTH                     0x00010034
+#define CPE_Q1_PI                        0x0001003c
+#define CPE_Q1_CI                        0x00010040
+#define CPE_Q2_DEPTH                     0x00010054
+#define CPE_Q2_PI                        0x0001005c
+#define CPE_Q2_CI                        0x00010060
+#define CPE_Q3_DEPTH                     0x00010074
+#define CPE_Q3_PI                        0x0001007c
+#define CPE_Q3_CI                        0x00010080
+#define CPE_Q4_DEPTH                     0x00010094
+#define CPE_Q4_PI                        0x0001009c
+#define CPE_Q4_CI                        0x000100a0
+#define CPE_Q5_DEPTH                     0x000100b4
+#define CPE_Q5_PI                        0x000100bc
+#define CPE_Q5_CI                        0x000100c0
+#define CPE_Q6_DEPTH                     0x000100d4
+#define CPE_Q6_PI                        0x000100dc
+#define CPE_Q6_CI                        0x000100e0
+#define CPE_Q7_DEPTH                     0x000100f4
+#define CPE_Q7_PI                        0x000100fc
+#define CPE_Q7_CI                        0x00010100
+#define RME_Q0_DEPTH                     0x00011014
+#define RME_Q0_PI                        0x0001101c
+#define RME_Q0_CI                        0x00011020
+#define RME_Q1_DEPTH                     0x00011034
+#define RME_Q1_PI                        0x0001103c
+#define RME_Q1_CI                        0x00011040
+#define RME_Q2_DEPTH                     0x00011054
+#define RME_Q2_PI                        0x0001105c
+#define RME_Q2_CI                        0x00011060
+#define RME_Q3_DEPTH                     0x00011074
+#define RME_Q3_PI                        0x0001107c
+#define RME_Q3_CI                        0x00011080
+#define RME_Q4_DEPTH                     0x00011094
+#define RME_Q4_PI                        0x0001109c
+#define RME_Q4_CI                        0x000110a0
+#define RME_Q5_DEPTH                     0x000110b4
+#define RME_Q5_PI                        0x000110bc
+#define RME_Q5_CI                        0x000110c0
+#define RME_Q6_DEPTH                     0x000110d4
+#define RME_Q6_PI                        0x000110dc
+#define RME_Q6_CI                        0x000110e0
+#define RME_Q7_DEPTH                     0x000110f4
+#define RME_Q7_PI                        0x000110fc
+#define RME_Q7_CI                        0x00011100
+#define PSS_CTL_REG                      0x00018800
+#define __PSS_I2C_CLK_DIV_MK             0x00030000
+#define __PSS_I2C_CLK_DIV_SH             16
+#define __PSS_I2C_CLK_DIV(_v)            ((_v) << __PSS_I2C_CLK_DIV_SH)
+#define __PSS_LMEM_INIT_DONE             0x00001000
+#define __PSS_LMEM_RESET                 0x00000200
+#define __PSS_LMEM_INIT_EN               0x00000100
+#define __PSS_LPU1_RESET                 0x00000002
+#define __PSS_LPU0_RESET                 0x00000001
+
+
+/*
+ * These definitions are either in error/missing in spec. Its auto-generated
+ * from hard coded values in regparse.pl.
+ */
+#define __EMPHPOST_AT_4G_MK_FIX          0x0000001c
+#define __EMPHPOST_AT_4G_SH_FIX          0x00000002
+#define __EMPHPRE_AT_4G_FIX              0x00000003
+#define __SFP_TXRATE_EN_FIX              0x00000100
+#define __SFP_RXRATE_EN_FIX              0x00000080
+
+
+/*
+ * These register definitions are auto-generated from hard coded values
+ * in regparse.pl.
+ */
+#define HOSTFN0_LPU_MBOX0_0              0x00019200
+#define HOSTFN1_LPU_MBOX0_8              0x00019260
+#define LPU_HOSTFN0_MBOX0_0              0x00019280
+#define LPU_HOSTFN1_MBOX0_8              0x000192e0
+
+
+/*
+ * These register mapping definitions are auto-generated from mapping tables
+ * in regparse.pl.
+ */
+#define BFA_IOC0_HBEAT_REG               HOST_SEM0_INFO_REG
+#define BFA_IOC0_STATE_REG               HOST_SEM1_INFO_REG
+#define BFA_IOC1_HBEAT_REG               HOST_SEM2_INFO_REG
+#define BFA_IOC1_STATE_REG               HOST_SEM3_INFO_REG
+#define BFA_FW_USE_COUNT                 HOST_SEM4_INFO_REG
+
+#define CPE_Q_DEPTH(__n) \
+	(CPE_Q0_DEPTH + (__n) * (CPE_Q1_DEPTH - CPE_Q0_DEPTH))
+#define CPE_Q_PI(__n) \
+	(CPE_Q0_PI + (__n) * (CPE_Q1_PI - CPE_Q0_PI))
+#define CPE_Q_CI(__n) \
+	(CPE_Q0_CI + (__n) * (CPE_Q1_CI - CPE_Q0_CI))
+#define RME_Q_DEPTH(__n) \
+	(RME_Q0_DEPTH + (__n) * (RME_Q1_DEPTH - RME_Q0_DEPTH))
+#define RME_Q_PI(__n) \
+	(RME_Q0_PI + (__n) * (RME_Q1_PI - RME_Q0_PI))
+#define RME_Q_CI(__n) \
+	(RME_Q0_CI + (__n) * (RME_Q1_CI - RME_Q0_CI))
+
+#define CPE_Q_NUM(__fn, __q)  (((__fn) << 2) + (__q))
+#define RME_Q_NUM(__fn, __q)  (((__fn) << 2) + (__q))
+#define CPE_Q_MASK(__q)  ((__q) & 0x3)
+#define RME_Q_MASK(__q)  ((__q) & 0x3)
+
+
+/*
+ * PCI MSI-X vector defines
+ */
+enum {
+    BFA_MSIX_CPE_Q0 = 0,
+    BFA_MSIX_CPE_Q1 = 1,
+    BFA_MSIX_CPE_Q2 = 2,
+    BFA_MSIX_CPE_Q3 = 3,
+    BFA_MSIX_CPE_Q4 = 4,
+    BFA_MSIX_CPE_Q5 = 5,
+    BFA_MSIX_CPE_Q6 = 6,
+    BFA_MSIX_CPE_Q7 = 7,
+    BFA_MSIX_RME_Q0 = 8,
+    BFA_MSIX_RME_Q1 = 9,
+    BFA_MSIX_RME_Q2 = 10,
+    BFA_MSIX_RME_Q3 = 11,
+    BFA_MSIX_RME_Q4 = 12,
+    BFA_MSIX_RME_Q5 = 13,
+    BFA_MSIX_RME_Q6 = 14,
+    BFA_MSIX_RME_Q7 = 15,
+    BFA_MSIX_ERR_EMC = 16,
+    BFA_MSIX_ERR_LPU0 = 17,
+    BFA_MSIX_ERR_LPU1 = 18,
+    BFA_MSIX_ERR_PSS = 19,
+    BFA_MSIX_MBOX_LPU0 = 20,
+    BFA_MSIX_MBOX_LPU1 = 21,
+    BFA_MSIX_CB_MAX = 22,
+};
+
+/*
+ * And corresponding host interrupt status bit field defines
+ */
+#define __HFN_INT_CPE_Q0                   0x00000001U
+#define __HFN_INT_CPE_Q1                   0x00000002U
+#define __HFN_INT_CPE_Q2                   0x00000004U
+#define __HFN_INT_CPE_Q3                   0x00000008U
+#define __HFN_INT_CPE_Q4                   0x00000010U
+#define __HFN_INT_CPE_Q5                   0x00000020U
+#define __HFN_INT_CPE_Q6                   0x00000040U
+#define __HFN_INT_CPE_Q7                   0x00000080U
+#define __HFN_INT_RME_Q0                   0x00000100U
+#define __HFN_INT_RME_Q1                   0x00000200U
+#define __HFN_INT_RME_Q2                   0x00000400U
+#define __HFN_INT_RME_Q3                   0x00000800U
+#define __HFN_INT_RME_Q4                   0x00001000U
+#define __HFN_INT_RME_Q5                   0x00002000U
+#define __HFN_INT_RME_Q6                   0x00004000U
+#define __HFN_INT_RME_Q7                   0x00008000U
+#define __HFN_INT_ERR_EMC                  0x00010000U
+#define __HFN_INT_ERR_LPU0                 0x00020000U
+#define __HFN_INT_ERR_LPU1                 0x00040000U
+#define __HFN_INT_ERR_PSS                  0x00080000U
+#define __HFN_INT_MBOX_LPU0                0x00100000U
+#define __HFN_INT_MBOX_LPU1                0x00200000U
+#define __HFN_INT_MBOX1_LPU0               0x00400000U
+#define __HFN_INT_MBOX1_LPU1               0x00800000U
+#define __HFN_INT_CPE_MASK                 0x000000ffU
+#define __HFN_INT_RME_MASK                 0x0000ff00U
+
+
+/*
+ * crossbow memory map.
+ */
+#define PSS_SMEM_PAGE_START	0x8000
+#define PSS_SMEM_PGNUM(_pg0, _ma)	((_pg0) + ((_ma) >> 15))
+#define PSS_SMEM_PGOFF(_ma)	((_ma) & 0x7fff)
+
+/*
+ * End of crossbow memory map
+ */
+
+
+#endif /* __BFI_CBREG_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_cee.h b/drivers/scsi/bfa/include/bfi/bfi_cee.h
new file mode 100644
index 000000000000..0970596583ea
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_cee.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/**
+ *  Copyright (c) 2006-2009 Brocade Communications Systems, Inc.
+ *  All rights reserved.
+ *
+ *  bfi_dcbx.h BFI Interface (Mailbox commands and related structures)
+ * between host driver and DCBX/LLDP firmware module.
+ *
+**/
+
+#ifndef __BFI_CEE_H__
+#define __BFI_CEE_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+
+enum bfi_cee_h2i_msgs_e {
+	BFI_CEE_H2I_GET_CFG_REQ = 1,
+	BFI_CEE_H2I_RESET_STATS = 2,
+	BFI_CEE_H2I_GET_STATS_REQ = 3,
+};
+
+
+enum bfi_cee_i2h_msgs_e {
+	BFI_CEE_I2H_GET_CFG_RSP = BFA_I2HM(1),
+	BFI_CEE_I2H_RESET_STATS_RSP = BFA_I2HM(2),
+	BFI_CEE_I2H_GET_STATS_RSP = BFA_I2HM(3),
+};
+
+
+/* Data structures */
+
+/*
+ * BFI_CEE_H2I_RESET_STATS
+ */
+struct bfi_lldp_reset_stats_s {
+	struct bfi_mhdr_s  mh;
+};
+
+/*
+ * BFI_CEE_H2I_RESET_STATS
+ */
+struct bfi_cee_reset_stats_s {
+	struct bfi_mhdr_s  mh;
+};
+
+/*
+ * BFI_CEE_H2I_GET_CFG_REQ
+ */
+struct bfi_cee_get_req_s {
+	struct bfi_mhdr_s  mh;
+	union bfi_addr_u   dma_addr;
+};
+
+
+/*
+ * BFI_CEE_I2H_GET_CFG_RSP
+ */
+struct bfi_cee_get_rsp_s {
+	struct bfi_mhdr_s  mh;
+	u8            cmd_status;
+	u8            rsvd[3];
+};
+
+/*
+ * BFI_CEE_H2I_GET_STATS_REQ
+ */
+struct bfi_cee_stats_req_s {
+	struct bfi_mhdr_s  mh;
+	union bfi_addr_u   dma_addr;
+};
+
+
+/*
+ * BFI_CEE_I2H_GET_STATS_RSP
+ */
+struct bfi_cee_stats_rsp_s {
+	struct bfi_mhdr_s  mh;
+	u8 		   cmd_status;
+	u8 		   rsvd[3];
+};
+
+
+
+union bfi_cee_h2i_msg_u {
+	struct bfi_mhdr_s           mh;
+	struct bfi_cee_get_req_s   get_req;
+	struct bfi_cee_stats_req_s stats_req;
+};
+
+
+union bfi_cee_i2h_msg_u {
+	struct bfi_mhdr_s         mh;
+	struct bfi_cee_get_rsp_s  get_rsp;
+	struct bfi_cee_stats_rsp_s stats_rsp;
+};
+
+#pragma pack()
+
+
+#endif /* __BFI_CEE_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_ctreg.h b/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
new file mode 100644
index 000000000000..d3caa58c0a0a
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
@@ -0,0 +1,611 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * bfi_ctreg.h catapult host block register definitions
+ *
+ * !!! Do not edit. Auto generated. !!!
+ */
+
+#ifndef __BFI_CTREG_H__
+#define __BFI_CTREG_H__
+
+
+#define HOSTFN0_LPU_MBOX0_0              0x00019200
+#define HOSTFN1_LPU_MBOX0_8              0x00019260
+#define LPU_HOSTFN0_MBOX0_0              0x00019280
+#define LPU_HOSTFN1_MBOX0_8              0x000192e0
+#define HOSTFN2_LPU_MBOX0_0              0x00019400
+#define HOSTFN3_LPU_MBOX0_8              0x00019460
+#define LPU_HOSTFN2_MBOX0_0              0x00019480
+#define LPU_HOSTFN3_MBOX0_8              0x000194e0
+#define HOSTFN0_INT_STATUS               0x00014000
+#define __HOSTFN0_HALT_OCCURRED          0x01000000
+#define __HOSTFN0_INT_STATUS_LVL_MK      0x00f00000
+#define __HOSTFN0_INT_STATUS_LVL_SH      20
+#define __HOSTFN0_INT_STATUS_LVL(_v)     ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
+#define __HOSTFN0_INT_STATUS_P_MK        0x000f0000
+#define __HOSTFN0_INT_STATUS_P_SH        16
+#define __HOSTFN0_INT_STATUS_P(_v)       ((_v) << __HOSTFN0_INT_STATUS_P_SH)
+#define __HOSTFN0_INT_STATUS_F           0x0000ffff
+#define HOSTFN0_INT_MSK                  0x00014004
+#define HOST_PAGE_NUM_FN0                0x00014008
+#define __HOST_PAGE_NUM_FN               0x000001ff
+#define HOST_MSIX_ERR_INDEX_FN0          0x0001400c
+#define __MSIX_ERR_INDEX_FN              0x000001ff
+#define HOSTFN1_INT_STATUS               0x00014100
+#define __HOSTFN1_HALT_OCCURRED          0x01000000
+#define __HOSTFN1_INT_STATUS_LVL_MK      0x00f00000
+#define __HOSTFN1_INT_STATUS_LVL_SH      20
+#define __HOSTFN1_INT_STATUS_LVL(_v)     ((_v) << __HOSTFN1_INT_STATUS_LVL_SH)
+#define __HOSTFN1_INT_STATUS_P_MK        0x000f0000
+#define __HOSTFN1_INT_STATUS_P_SH        16
+#define __HOSTFN1_INT_STATUS_P(_v)       ((_v) << __HOSTFN1_INT_STATUS_P_SH)
+#define __HOSTFN1_INT_STATUS_F           0x0000ffff
+#define HOSTFN1_INT_MSK                  0x00014104
+#define HOST_PAGE_NUM_FN1                0x00014108
+#define HOST_MSIX_ERR_INDEX_FN1          0x0001410c
+#define APP_PLL_425_CTL_REG              0x00014204
+#define __P_425_PLL_LOCK                 0x80000000
+#define __APP_PLL_425_SRAM_USE_100MHZ    0x00100000
+#define __APP_PLL_425_RESET_TIMER_MK     0x000e0000
+#define __APP_PLL_425_RESET_TIMER_SH     17
+#define __APP_PLL_425_RESET_TIMER(_v)    ((_v) << __APP_PLL_425_RESET_TIMER_SH)
+#define __APP_PLL_425_LOGIC_SOFT_RESET   0x00010000
+#define __APP_PLL_425_CNTLMT0_1_MK       0x0000c000
+#define __APP_PLL_425_CNTLMT0_1_SH       14
+#define __APP_PLL_425_CNTLMT0_1(_v)      ((_v) << __APP_PLL_425_CNTLMT0_1_SH)
+#define __APP_PLL_425_JITLMT0_1_MK       0x00003000
+#define __APP_PLL_425_JITLMT0_1_SH       12
+#define __APP_PLL_425_JITLMT0_1(_v)      ((_v) << __APP_PLL_425_JITLMT0_1_SH)
+#define __APP_PLL_425_HREF               0x00000800
+#define __APP_PLL_425_HDIV               0x00000400
+#define __APP_PLL_425_P0_1_MK            0x00000300
+#define __APP_PLL_425_P0_1_SH            8
+#define __APP_PLL_425_P0_1(_v)           ((_v) << __APP_PLL_425_P0_1_SH)
+#define __APP_PLL_425_Z0_2_MK            0x000000e0
+#define __APP_PLL_425_Z0_2_SH            5
+#define __APP_PLL_425_Z0_2(_v)           ((_v) << __APP_PLL_425_Z0_2_SH)
+#define __APP_PLL_425_RSEL200500         0x00000010
+#define __APP_PLL_425_ENARST             0x00000008
+#define __APP_PLL_425_BYPASS             0x00000004
+#define __APP_PLL_425_LRESETN            0x00000002
+#define __APP_PLL_425_ENABLE             0x00000001
+#define APP_PLL_312_CTL_REG              0x00014208
+#define __P_312_PLL_LOCK                 0x80000000
+#define __ENABLE_MAC_AHB_1               0x00800000
+#define __ENABLE_MAC_AHB_0               0x00400000
+#define __ENABLE_MAC_1                   0x00200000
+#define __ENABLE_MAC_0                   0x00100000
+#define __APP_PLL_312_RESET_TIMER_MK     0x000e0000
+#define __APP_PLL_312_RESET_TIMER_SH     17
+#define __APP_PLL_312_RESET_TIMER(_v)    ((_v) << __APP_PLL_312_RESET_TIMER_SH)
+#define __APP_PLL_312_LOGIC_SOFT_RESET   0x00010000
+#define __APP_PLL_312_CNTLMT0_1_MK       0x0000c000
+#define __APP_PLL_312_CNTLMT0_1_SH       14
+#define __APP_PLL_312_CNTLMT0_1(_v)      ((_v) << __APP_PLL_312_CNTLMT0_1_SH)
+#define __APP_PLL_312_JITLMT0_1_MK       0x00003000
+#define __APP_PLL_312_JITLMT0_1_SH       12
+#define __APP_PLL_312_JITLMT0_1(_v)      ((_v) << __APP_PLL_312_JITLMT0_1_SH)
+#define __APP_PLL_312_HREF               0x00000800
+#define __APP_PLL_312_HDIV               0x00000400
+#define __APP_PLL_312_P0_1_MK            0x00000300
+#define __APP_PLL_312_P0_1_SH            8
+#define __APP_PLL_312_P0_1(_v)           ((_v) << __APP_PLL_312_P0_1_SH)
+#define __APP_PLL_312_Z0_2_MK            0x000000e0
+#define __APP_PLL_312_Z0_2_SH            5
+#define __APP_PLL_312_Z0_2(_v)           ((_v) << __APP_PLL_312_Z0_2_SH)
+#define __APP_PLL_312_RSEL200500         0x00000010
+#define __APP_PLL_312_ENARST             0x00000008
+#define __APP_PLL_312_BYPASS             0x00000004
+#define __APP_PLL_312_LRESETN            0x00000002
+#define __APP_PLL_312_ENABLE             0x00000001
+#define MBIST_CTL_REG                    0x00014220
+#define __EDRAM_BISTR_START              0x00000004
+#define __MBIST_RESET                    0x00000002
+#define __MBIST_START                    0x00000001
+#define MBIST_STAT_REG                   0x00014224
+#define __EDRAM_BISTR_STATUS             0x00000008
+#define __EDRAM_BISTR_DONE               0x00000004
+#define __MEM_BIT_STATUS                 0x00000002
+#define __MBIST_DONE                     0x00000001
+#define HOST_SEM0_REG                    0x00014230
+#define __HOST_SEMAPHORE                 0x00000001
+#define HOST_SEM1_REG                    0x00014234
+#define HOST_SEM2_REG                    0x00014238
+#define HOST_SEM3_REG                    0x0001423c
+#define HOST_SEM0_INFO_REG               0x00014240
+#define HOST_SEM1_INFO_REG               0x00014244
+#define HOST_SEM2_INFO_REG               0x00014248
+#define HOST_SEM3_INFO_REG               0x0001424c
+#define ETH_MAC_SER_REG                  0x00014288
+#define __APP_EMS_CKBUFAMPIN             0x00000020
+#define __APP_EMS_REFCLKSEL              0x00000010
+#define __APP_EMS_CMLCKSEL               0x00000008
+#define __APP_EMS_REFCKBUFEN2            0x00000004
+#define __APP_EMS_REFCKBUFEN1            0x00000002
+#define __APP_EMS_CHANNEL_SEL            0x00000001
+#define HOSTFN2_INT_STATUS               0x00014300
+#define __HOSTFN2_HALT_OCCURRED          0x01000000
+#define __HOSTFN2_INT_STATUS_LVL_MK      0x00f00000
+#define __HOSTFN2_INT_STATUS_LVL_SH      20
+#define __HOSTFN2_INT_STATUS_LVL(_v)     ((_v) << __HOSTFN2_INT_STATUS_LVL_SH)
+#define __HOSTFN2_INT_STATUS_P_MK        0x000f0000
+#define __HOSTFN2_INT_STATUS_P_SH        16
+#define __HOSTFN2_INT_STATUS_P(_v)       ((_v) << __HOSTFN2_INT_STATUS_P_SH)
+#define __HOSTFN2_INT_STATUS_F           0x0000ffff
+#define HOSTFN2_INT_MSK                  0x00014304
+#define HOST_PAGE_NUM_FN2                0x00014308
+#define HOST_MSIX_ERR_INDEX_FN2          0x0001430c
+#define HOSTFN3_INT_STATUS               0x00014400
+#define __HALT_OCCURRED                  0x01000000
+#define __HOSTFN3_INT_STATUS_LVL_MK      0x00f00000
+#define __HOSTFN3_INT_STATUS_LVL_SH      20
+#define __HOSTFN3_INT_STATUS_LVL(_v)     ((_v) << __HOSTFN3_INT_STATUS_LVL_SH)
+#define __HOSTFN3_INT_STATUS_P_MK        0x000f0000
+#define __HOSTFN3_INT_STATUS_P_SH        16
+#define __HOSTFN3_INT_STATUS_P(_v)       ((_v) << __HOSTFN3_INT_STATUS_P_SH)
+#define __HOSTFN3_INT_STATUS_F           0x0000ffff
+#define HOSTFN3_INT_MSK                  0x00014404
+#define HOST_PAGE_NUM_FN3                0x00014408
+#define HOST_MSIX_ERR_INDEX_FN3          0x0001440c
+#define FNC_ID_REG                       0x00014600
+#define __FUNCTION_NUMBER                0x00000007
+#define FNC_PERS_REG                     0x00014604
+#define __F3_FUNCTION_ACTIVE             0x80000000
+#define __F3_FUNCTION_MODE               0x40000000
+#define __F3_PORT_MAP_MK                 0x30000000
+#define __F3_PORT_MAP_SH                 28
+#define __F3_PORT_MAP(_v)                ((_v) << __F3_PORT_MAP_SH)
+#define __F3_VM_MODE                     0x08000000
+#define __F3_INTX_STATUS_MK              0x07000000
+#define __F3_INTX_STATUS_SH              24
+#define __F3_INTX_STATUS(_v)             ((_v) << __F3_INTX_STATUS_SH)
+#define __F2_FUNCTION_ACTIVE             0x00800000
+#define __F2_FUNCTION_MODE               0x00400000
+#define __F2_PORT_MAP_MK                 0x00300000
+#define __F2_PORT_MAP_SH                 20
+#define __F2_PORT_MAP(_v)                ((_v) << __F2_PORT_MAP_SH)
+#define __F2_VM_MODE                     0x00080000
+#define __F2_INTX_STATUS_MK              0x00070000
+#define __F2_INTX_STATUS_SH              16
+#define __F2_INTX_STATUS(_v)             ((_v) << __F2_INTX_STATUS_SH)
+#define __F1_FUNCTION_ACTIVE             0x00008000
+#define __F1_FUNCTION_MODE               0x00004000
+#define __F1_PORT_MAP_MK                 0x00003000
+#define __F1_PORT_MAP_SH                 12
+#define __F1_PORT_MAP(_v)                ((_v) << __F1_PORT_MAP_SH)
+#define __F1_VM_MODE                     0x00000800
+#define __F1_INTX_STATUS_MK              0x00000700
+#define __F1_INTX_STATUS_SH              8
+#define __F1_INTX_STATUS(_v)             ((_v) << __F1_INTX_STATUS_SH)
+#define __F0_FUNCTION_ACTIVE             0x00000080
+#define __F0_FUNCTION_MODE               0x00000040
+#define __F0_PORT_MAP_MK                 0x00000030
+#define __F0_PORT_MAP_SH                 4
+#define __F0_PORT_MAP(_v)                ((_v) << __F0_PORT_MAP_SH)
+#define __F0_VM_MODE                     0x00000008
+#define __F0_INTX_STATUS                 0x00000007
+enum {
+    __F0_INTX_STATUS_MSIX            = 0x0,
+    __F0_INTX_STATUS_INTA            = 0x1,
+    __F0_INTX_STATUS_INTB            = 0x2,
+    __F0_INTX_STATUS_INTC            = 0x3,
+    __F0_INTX_STATUS_INTD            = 0x4,
+};
+#define OP_MODE                          0x0001460c
+#define __APP_ETH_CLK_LOWSPEED           0x00000004
+#define __GLOBAL_CORECLK_HALFSPEED       0x00000002
+#define __GLOBAL_FCOE_MODE               0x00000001
+#define HOST_SEM4_REG                    0x00014610
+#define HOST_SEM5_REG                    0x00014614
+#define HOST_SEM6_REG                    0x00014618
+#define HOST_SEM7_REG                    0x0001461c
+#define HOST_SEM4_INFO_REG               0x00014620
+#define HOST_SEM5_INFO_REG               0x00014624
+#define HOST_SEM6_INFO_REG               0x00014628
+#define HOST_SEM7_INFO_REG               0x0001462c
+#define HOSTFN0_LPU0_MBOX0_CMD_STAT      0x00019000
+#define __HOSTFN0_LPU0_MBOX0_INFO_MK     0xfffffffe
+#define __HOSTFN0_LPU0_MBOX0_INFO_SH     1
+#define __HOSTFN0_LPU0_MBOX0_INFO(_v)    ((_v) << __HOSTFN0_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN0_LPU0_MBOX0_CMD_STATUS  0x00000001
+#define HOSTFN0_LPU1_MBOX0_CMD_STAT      0x00019004
+#define __HOSTFN0_LPU1_MBOX0_INFO_MK     0xfffffffe
+#define __HOSTFN0_LPU1_MBOX0_INFO_SH     1
+#define __HOSTFN0_LPU1_MBOX0_INFO(_v)    ((_v) << __HOSTFN0_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN0_LPU1_MBOX0_CMD_STATUS  0x00000001
+#define LPU0_HOSTFN0_MBOX0_CMD_STAT      0x00019008
+#define __LPU0_HOSTFN0_MBOX0_INFO_MK     0xfffffffe
+#define __LPU0_HOSTFN0_MBOX0_INFO_SH     1
+#define __LPU0_HOSTFN0_MBOX0_INFO(_v)    ((_v) << __LPU0_HOSTFN0_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN0_MBOX0_CMD_STATUS  0x00000001
+#define LPU1_HOSTFN0_MBOX0_CMD_STAT      0x0001900c
+#define __LPU1_HOSTFN0_MBOX0_INFO_MK     0xfffffffe
+#define __LPU1_HOSTFN0_MBOX0_INFO_SH     1
+#define __LPU1_HOSTFN0_MBOX0_INFO(_v)    ((_v) << __LPU1_HOSTFN0_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN0_MBOX0_CMD_STATUS  0x00000001
+#define HOSTFN1_LPU0_MBOX0_CMD_STAT      0x00019010
+#define __HOSTFN1_LPU0_MBOX0_INFO_MK     0xfffffffe
+#define __HOSTFN1_LPU0_MBOX0_INFO_SH     1
+#define __HOSTFN1_LPU0_MBOX0_INFO(_v)    ((_v) << __HOSTFN1_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN1_LPU0_MBOX0_CMD_STATUS  0x00000001
+#define HOSTFN1_LPU1_MBOX0_CMD_STAT      0x00019014
+#define __HOSTFN1_LPU1_MBOX0_INFO_MK     0xfffffffe
+#define __HOSTFN1_LPU1_MBOX0_INFO_SH     1
+#define __HOSTFN1_LPU1_MBOX0_INFO(_v)    ((_v) << __HOSTFN1_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN1_LPU1_MBOX0_CMD_STATUS  0x00000001
+#define LPU0_HOSTFN1_MBOX0_CMD_STAT      0x00019018
+#define __LPU0_HOSTFN1_MBOX0_INFO_MK     0xfffffffe
+#define __LPU0_HOSTFN1_MBOX0_INFO_SH     1
+#define __LPU0_HOSTFN1_MBOX0_INFO(_v)    ((_v) << __LPU0_HOSTFN1_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN1_MBOX0_CMD_STATUS  0x00000001
+#define LPU1_HOSTFN1_MBOX0_CMD_STAT      0x0001901c
+#define __LPU1_HOSTFN1_MBOX0_INFO_MK     0xfffffffe
+#define __LPU1_HOSTFN1_MBOX0_INFO_SH     1
+#define __LPU1_HOSTFN1_MBOX0_INFO(_v)    ((_v) << __LPU1_HOSTFN1_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN1_MBOX0_CMD_STATUS  0x00000001
+#define HOSTFN2_LPU0_MBOX0_CMD_STAT      0x00019150
+#define __HOSTFN2_LPU0_MBOX0_INFO_MK     0xfffffffe
+#define __HOSTFN2_LPU0_MBOX0_INFO_SH     1
+#define __HOSTFN2_LPU0_MBOX0_INFO(_v)    ((_v) << __HOSTFN2_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN2_LPU0_MBOX0_CMD_STATUS  0x00000001
+#define HOSTFN2_LPU1_MBOX0_CMD_STAT      0x00019154
+#define __HOSTFN2_LPU1_MBOX0_INFO_MK     0xfffffffe
+#define __HOSTFN2_LPU1_MBOX0_INFO_SH     1
+#define __HOSTFN2_LPU1_MBOX0_INFO(_v)    ((_v) << __HOSTFN2_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN2_LPU1_MBOX0BOX0_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN2_MBOX0_CMD_STAT      0x00019158
+#define __LPU0_HOSTFN2_MBOX0_INFO_MK     0xfffffffe
+#define __LPU0_HOSTFN2_MBOX0_INFO_SH     1
+#define __LPU0_HOSTFN2_MBOX0_INFO(_v)    ((_v) << __LPU0_HOSTFN2_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN2_MBOX0_CMD_STATUS  0x00000001
+#define LPU1_HOSTFN2_MBOX0_CMD_STAT      0x0001915c
+#define __LPU1_HOSTFN2_MBOX0_INFO_MK     0xfffffffe
+#define __LPU1_HOSTFN2_MBOX0_INFO_SH     1
+#define __LPU1_HOSTFN2_MBOX0_INFO(_v)    ((_v) << __LPU1_HOSTFN2_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN2_MBOX0_CMD_STATUS  0x00000001
+#define HOSTFN3_LPU0_MBOX0_CMD_STAT      0x00019160
+#define __HOSTFN3_LPU0_MBOX0_INFO_MK     0xfffffffe
+#define __HOSTFN3_LPU0_MBOX0_INFO_SH     1
+#define __HOSTFN3_LPU0_MBOX0_INFO(_v)    ((_v) << __HOSTFN3_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN3_LPU0_MBOX0_CMD_STATUS  0x00000001
+#define HOSTFN3_LPU1_MBOX0_CMD_STAT      0x00019164
+#define __HOSTFN3_LPU1_MBOX0_INFO_MK     0xfffffffe
+#define __HOSTFN3_LPU1_MBOX0_INFO_SH     1
+#define __HOSTFN3_LPU1_MBOX0_INFO(_v)    ((_v) << __HOSTFN3_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN3_LPU1_MBOX0_CMD_STATUS  0x00000001
+#define LPU0_HOSTFN3_MBOX0_CMD_STAT      0x00019168
+#define __LPU0_HOSTFN3_MBOX0_INFO_MK     0xfffffffe
+#define __LPU0_HOSTFN3_MBOX0_INFO_SH     1
+#define __LPU0_HOSTFN3_MBOX0_INFO(_v)    ((_v) << __LPU0_HOSTFN3_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN3_MBOX0_CMD_STATUS  0x00000001
+#define LPU1_HOSTFN3_MBOX0_CMD_STAT      0x0001916c
+#define __LPU1_HOSTFN3_MBOX0_INFO_MK     0xfffffffe
+#define __LPU1_HOSTFN3_MBOX0_INFO_SH     1
+#define __LPU1_HOSTFN3_MBOX0_INFO(_v)    ((_v) << __LPU1_HOSTFN3_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN3_MBOX0_CMD_STATUS  0x00000001
+#define FW_INIT_HALT_P0                  0x000191ac
+#define __FW_INIT_HALT_P                 0x00000001
+#define FW_INIT_HALT_P1                  0x000191bc
+#define CPE_PI_PTR_Q0                    0x00038000
+#define __CPE_PI_UNUSED_MK               0xffff0000
+#define __CPE_PI_UNUSED_SH               16
+#define __CPE_PI_UNUSED(_v)              ((_v) << __CPE_PI_UNUSED_SH)
+#define __CPE_PI_PTR                     0x0000ffff
+#define CPE_PI_PTR_Q1                    0x00038040
+#define CPE_CI_PTR_Q0                    0x00038004
+#define __CPE_CI_UNUSED_MK               0xffff0000
+#define __CPE_CI_UNUSED_SH               16
+#define __CPE_CI_UNUSED(_v)              ((_v) << __CPE_CI_UNUSED_SH)
+#define __CPE_CI_PTR                     0x0000ffff
+#define CPE_CI_PTR_Q1                    0x00038044
+#define CPE_DEPTH_Q0                     0x00038008
+#define __CPE_DEPTH_UNUSED_MK            0xf8000000
+#define __CPE_DEPTH_UNUSED_SH            27
+#define __CPE_DEPTH_UNUSED(_v)           ((_v) << __CPE_DEPTH_UNUSED_SH)
+#define __CPE_MSIX_VEC_INDEX_MK          0x07ff0000
+#define __CPE_MSIX_VEC_INDEX_SH          16
+#define __CPE_MSIX_VEC_INDEX(_v)         ((_v) << __CPE_MSIX_VEC_INDEX_SH)
+#define __CPE_DEPTH                      0x0000ffff
+#define CPE_DEPTH_Q1                     0x00038048
+#define CPE_QCTRL_Q0                     0x0003800c
+#define __CPE_CTRL_UNUSED30_MK           0xfc000000
+#define __CPE_CTRL_UNUSED30_SH           26
+#define __CPE_CTRL_UNUSED30(_v)          ((_v) << __CPE_CTRL_UNUSED30_SH)
+#define __CPE_FUNC_INT_CTRL_MK           0x03000000
+#define __CPE_FUNC_INT_CTRL_SH           24
+#define __CPE_FUNC_INT_CTRL(_v)          ((_v) << __CPE_FUNC_INT_CTRL_SH)
+enum {
+    __CPE_FUNC_INT_CTRL_DISABLE      = 0x0,
+    __CPE_FUNC_INT_CTRL_F2NF         = 0x1,
+    __CPE_FUNC_INT_CTRL_3QUART       = 0x2,
+    __CPE_FUNC_INT_CTRL_HALF         = 0x3,
+};
+#define __CPE_CTRL_UNUSED20_MK           0x00f00000
+#define __CPE_CTRL_UNUSED20_SH           20
+#define __CPE_CTRL_UNUSED20(_v)          ((_v) << __CPE_CTRL_UNUSED20_SH)
+#define __CPE_SCI_TH_MK                  0x000f0000
+#define __CPE_SCI_TH_SH                  16
+#define __CPE_SCI_TH(_v)                 ((_v) << __CPE_SCI_TH_SH)
+#define __CPE_CTRL_UNUSED10_MK           0x0000c000
+#define __CPE_CTRL_UNUSED10_SH           14
+#define __CPE_CTRL_UNUSED10(_v)          ((_v) << __CPE_CTRL_UNUSED10_SH)
+#define __CPE_ACK_PENDING                0x00002000
+#define __CPE_CTRL_UNUSED40_MK           0x00001c00
+#define __CPE_CTRL_UNUSED40_SH           10
+#define __CPE_CTRL_UNUSED40(_v)          ((_v) << __CPE_CTRL_UNUSED40_SH)
+#define __CPE_PCIEID_MK                  0x00000300
+#define __CPE_PCIEID_SH                  8
+#define __CPE_PCIEID(_v)                 ((_v) << __CPE_PCIEID_SH)
+#define __CPE_CTRL_UNUSED00_MK           0x000000fe
+#define __CPE_CTRL_UNUSED00_SH           1
+#define __CPE_CTRL_UNUSED00(_v)          ((_v) << __CPE_CTRL_UNUSED00_SH)
+#define __CPE_ESIZE                      0x00000001
+#define CPE_QCTRL_Q1                     0x0003804c
+#define __CPE_CTRL_UNUSED31_MK           0xfc000000
+#define __CPE_CTRL_UNUSED31_SH           26
+#define __CPE_CTRL_UNUSED31(_v)          ((_v) << __CPE_CTRL_UNUSED31_SH)
+#define __CPE_CTRL_UNUSED21_MK           0x00f00000
+#define __CPE_CTRL_UNUSED21_SH           20
+#define __CPE_CTRL_UNUSED21(_v)          ((_v) << __CPE_CTRL_UNUSED21_SH)
+#define __CPE_CTRL_UNUSED11_MK           0x0000c000
+#define __CPE_CTRL_UNUSED11_SH           14
+#define __CPE_CTRL_UNUSED11(_v)          ((_v) << __CPE_CTRL_UNUSED11_SH)
+#define __CPE_CTRL_UNUSED41_MK           0x00001c00
+#define __CPE_CTRL_UNUSED41_SH           10
+#define __CPE_CTRL_UNUSED41(_v)          ((_v) << __CPE_CTRL_UNUSED41_SH)
+#define __CPE_CTRL_UNUSED01_MK           0x000000fe
+#define __CPE_CTRL_UNUSED01_SH           1
+#define __CPE_CTRL_UNUSED01(_v)          ((_v) << __CPE_CTRL_UNUSED01_SH)
+#define RME_PI_PTR_Q0                    0x00038020
+#define __LATENCY_TIME_STAMP_MK          0xffff0000
+#define __LATENCY_TIME_STAMP_SH          16
+#define __LATENCY_TIME_STAMP(_v)         ((_v) << __LATENCY_TIME_STAMP_SH)
+#define __RME_PI_PTR                     0x0000ffff
+#define RME_PI_PTR_Q1                    0x00038060
+#define RME_CI_PTR_Q0                    0x00038024
+#define __DELAY_TIME_STAMP_MK            0xffff0000
+#define __DELAY_TIME_STAMP_SH            16
+#define __DELAY_TIME_STAMP(_v)           ((_v) << __DELAY_TIME_STAMP_SH)
+#define __RME_CI_PTR                     0x0000ffff
+#define RME_CI_PTR_Q1                    0x00038064
+#define RME_DEPTH_Q0                     0x00038028
+#define __RME_DEPTH_UNUSED_MK            0xf8000000
+#define __RME_DEPTH_UNUSED_SH            27
+#define __RME_DEPTH_UNUSED(_v)           ((_v) << __RME_DEPTH_UNUSED_SH)
+#define __RME_MSIX_VEC_INDEX_MK          0x07ff0000
+#define __RME_MSIX_VEC_INDEX_SH          16
+#define __RME_MSIX_VEC_INDEX(_v)         ((_v) << __RME_MSIX_VEC_INDEX_SH)
+#define __RME_DEPTH                      0x0000ffff
+#define RME_DEPTH_Q1                     0x00038068
+#define RME_QCTRL_Q0                     0x0003802c
+#define __RME_INT_LATENCY_TIMER_MK       0xff000000
+#define __RME_INT_LATENCY_TIMER_SH       24
+#define __RME_INT_LATENCY_TIMER(_v)      ((_v) << __RME_INT_LATENCY_TIMER_SH)
+#define __RME_INT_DELAY_TIMER_MK         0x00ff0000
+#define __RME_INT_DELAY_TIMER_SH         16
+#define __RME_INT_DELAY_TIMER(_v)        ((_v) << __RME_INT_DELAY_TIMER_SH)
+#define __RME_INT_DELAY_DISABLE          0x00008000
+#define __RME_DLY_DELAY_DISABLE          0x00004000
+#define __RME_ACK_PENDING                0x00002000
+#define __RME_FULL_INTERRUPT_DISABLE     0x00001000
+#define __RME_CTRL_UNUSED10_MK           0x00000c00
+#define __RME_CTRL_UNUSED10_SH           10
+#define __RME_CTRL_UNUSED10(_v)          ((_v) << __RME_CTRL_UNUSED10_SH)
+#define __RME_PCIEID_MK                  0x00000300
+#define __RME_PCIEID_SH                  8
+#define __RME_PCIEID(_v)                 ((_v) << __RME_PCIEID_SH)
+#define __RME_CTRL_UNUSED00_MK           0x000000fe
+#define __RME_CTRL_UNUSED00_SH           1
+#define __RME_CTRL_UNUSED00(_v)          ((_v) << __RME_CTRL_UNUSED00_SH)
+#define __RME_ESIZE                      0x00000001
+#define RME_QCTRL_Q1                     0x0003806c
+#define __RME_CTRL_UNUSED11_MK           0x00000c00
+#define __RME_CTRL_UNUSED11_SH           10
+#define __RME_CTRL_UNUSED11(_v)          ((_v) << __RME_CTRL_UNUSED11_SH)
+#define __RME_CTRL_UNUSED01_MK           0x000000fe
+#define __RME_CTRL_UNUSED01_SH           1
+#define __RME_CTRL_UNUSED01(_v)          ((_v) << __RME_CTRL_UNUSED01_SH)
+#define PSS_CTL_REG                      0x00018800
+#define __PSS_I2C_CLK_DIV_MK             0x007f0000
+#define __PSS_I2C_CLK_DIV_SH             16
+#define __PSS_I2C_CLK_DIV(_v)            ((_v) << __PSS_I2C_CLK_DIV_SH)
+#define __PSS_LMEM_INIT_DONE             0x00001000
+#define __PSS_LMEM_RESET                 0x00000200
+#define __PSS_LMEM_INIT_EN               0x00000100
+#define __PSS_LPU1_RESET                 0x00000002
+#define __PSS_LPU0_RESET                 0x00000001
+#define HQM_QSET0_RXQ_DRBL_P0            0x00038000
+#define __RXQ0_ADD_VECTORS_P             0x80000000
+#define __RXQ0_STOP_P                    0x40000000
+#define __RXQ0_PRD_PTR_P                 0x0000ffff
+#define HQM_QSET1_RXQ_DRBL_P0            0x00038080
+#define __RXQ1_ADD_VECTORS_P             0x80000000
+#define __RXQ1_STOP_P                    0x40000000
+#define __RXQ1_PRD_PTR_P                 0x0000ffff
+#define HQM_QSET0_RXQ_DRBL_P1            0x0003c000
+#define HQM_QSET1_RXQ_DRBL_P1            0x0003c080
+#define HQM_QSET0_TXQ_DRBL_P0            0x00038020
+#define __TXQ0_ADD_VECTORS_P             0x80000000
+#define __TXQ0_STOP_P                    0x40000000
+#define __TXQ0_PRD_PTR_P                 0x0000ffff
+#define HQM_QSET1_TXQ_DRBL_P0            0x000380a0
+#define __TXQ1_ADD_VECTORS_P             0x80000000
+#define __TXQ1_STOP_P                    0x40000000
+#define __TXQ1_PRD_PTR_P                 0x0000ffff
+#define HQM_QSET0_TXQ_DRBL_P1            0x0003c020
+#define HQM_QSET1_TXQ_DRBL_P1            0x0003c0a0
+#define HQM_QSET0_IB_DRBL_1_P0           0x00038040
+#define __IB1_0_ACK_P                    0x80000000
+#define __IB1_0_DISABLE_P                0x40000000
+#define __IB1_0_NUM_OF_ACKED_EVENTS_P    0x0000ffff
+#define HQM_QSET1_IB_DRBL_1_P0           0x000380c0
+#define __IB1_1_ACK_P                    0x80000000
+#define __IB1_1_DISABLE_P                0x40000000
+#define __IB1_1_NUM_OF_ACKED_EVENTS_P    0x0000ffff
+#define HQM_QSET0_IB_DRBL_1_P1           0x0003c040
+#define HQM_QSET1_IB_DRBL_1_P1           0x0003c0c0
+#define HQM_QSET0_IB_DRBL_2_P0           0x00038060
+#define __IB2_0_ACK_P                    0x80000000
+#define __IB2_0_DISABLE_P                0x40000000
+#define __IB2_0_NUM_OF_ACKED_EVENTS_P    0x0000ffff
+#define HQM_QSET1_IB_DRBL_2_P0           0x000380e0
+#define __IB2_1_ACK_P                    0x80000000
+#define __IB2_1_DISABLE_P                0x40000000
+#define __IB2_1_NUM_OF_ACKED_EVENTS_P    0x0000ffff
+#define HQM_QSET0_IB_DRBL_2_P1           0x0003c060
+#define HQM_QSET1_IB_DRBL_2_P1           0x0003c0e0
+
+
+/*
+ * These definitions are either in error/missing in spec. Its auto-generated
+ * from hard coded values in regparse.pl.
+ */
+#define __EMPHPOST_AT_4G_MK_FIX          0x0000001c
+#define __EMPHPOST_AT_4G_SH_FIX          0x00000002
+#define __EMPHPRE_AT_4G_FIX              0x00000003
+#define __SFP_TXRATE_EN_FIX              0x00000100
+#define __SFP_RXRATE_EN_FIX              0x00000080
+
+
+/*
+ * These register definitions are auto-generated from hard coded values
+ * in regparse.pl.
+ */
+
+
+/*
+ * These register mapping definitions are auto-generated from mapping tables
+ * in regparse.pl.
+ */
+#define BFA_IOC0_HBEAT_REG               HOST_SEM0_INFO_REG
+#define BFA_IOC0_STATE_REG               HOST_SEM1_INFO_REG
+#define BFA_IOC1_HBEAT_REG               HOST_SEM2_INFO_REG
+#define BFA_IOC1_STATE_REG               HOST_SEM3_INFO_REG
+#define BFA_FW_USE_COUNT                 HOST_SEM4_INFO_REG
+
+#define CPE_DEPTH_Q(__n) \
+	(CPE_DEPTH_Q0 + (__n) * (CPE_DEPTH_Q1 - CPE_DEPTH_Q0))
+#define CPE_QCTRL_Q(__n) \
+	(CPE_QCTRL_Q0 + (__n) * (CPE_QCTRL_Q1 - CPE_QCTRL_Q0))
+#define CPE_PI_PTR_Q(__n) \
+	(CPE_PI_PTR_Q0 + (__n) * (CPE_PI_PTR_Q1 - CPE_PI_PTR_Q0))
+#define CPE_CI_PTR_Q(__n) \
+	(CPE_CI_PTR_Q0 + (__n) * (CPE_CI_PTR_Q1 - CPE_CI_PTR_Q0))
+#define RME_DEPTH_Q(__n) \
+	(RME_DEPTH_Q0 + (__n) * (RME_DEPTH_Q1 - RME_DEPTH_Q0))
+#define RME_QCTRL_Q(__n) \
+	(RME_QCTRL_Q0 + (__n) * (RME_QCTRL_Q1 - RME_QCTRL_Q0))
+#define RME_PI_PTR_Q(__n) \
+	(RME_PI_PTR_Q0 + (__n) * (RME_PI_PTR_Q1 - RME_PI_PTR_Q0))
+#define RME_CI_PTR_Q(__n) \
+	(RME_CI_PTR_Q0 + (__n) * (RME_CI_PTR_Q1 - RME_CI_PTR_Q0))
+#define HQM_QSET_RXQ_DRBL_P0(__n) \
+	(HQM_QSET0_RXQ_DRBL_P0 + (__n) * (HQM_QSET1_RXQ_DRBL_P0 - \
+	HQM_QSET0_RXQ_DRBL_P0))
+#define HQM_QSET_TXQ_DRBL_P0(__n) \
+	(HQM_QSET0_TXQ_DRBL_P0 + (__n) * (HQM_QSET1_TXQ_DRBL_P0 - \
+	HQM_QSET0_TXQ_DRBL_P0))
+#define HQM_QSET_IB_DRBL_1_P0(__n) \
+	(HQM_QSET0_IB_DRBL_1_P0 + (__n) * (HQM_QSET1_IB_DRBL_1_P0 - \
+	HQM_QSET0_IB_DRBL_1_P0))
+#define HQM_QSET_IB_DRBL_2_P0(__n) \
+	(HQM_QSET0_IB_DRBL_2_P0 + (__n) * (HQM_QSET1_IB_DRBL_2_P0 - \
+	HQM_QSET0_IB_DRBL_2_P0))
+#define HQM_QSET_RXQ_DRBL_P1(__n) \
+	(HQM_QSET0_RXQ_DRBL_P1 + (__n) * (HQM_QSET1_RXQ_DRBL_P1 - \
+	HQM_QSET0_RXQ_DRBL_P1))
+#define HQM_QSET_TXQ_DRBL_P1(__n) \
+	(HQM_QSET0_TXQ_DRBL_P1 + (__n) * (HQM_QSET1_TXQ_DRBL_P1 - \
+	HQM_QSET0_TXQ_DRBL_P1))
+#define HQM_QSET_IB_DRBL_1_P1(__n) \
+	(HQM_QSET0_IB_DRBL_1_P1 + (__n) * (HQM_QSET1_IB_DRBL_1_P1 - \
+	HQM_QSET0_IB_DRBL_1_P1))
+#define HQM_QSET_IB_DRBL_2_P1(__n) \
+	(HQM_QSET0_IB_DRBL_2_P1 + (__n) * (HQM_QSET1_IB_DRBL_2_P1 - \
+	HQM_QSET0_IB_DRBL_2_P1))
+
+#define CPE_Q_NUM(__fn, __q)  (((__fn) << 2) + (__q))
+#define RME_Q_NUM(__fn, __q)  (((__fn) << 2) + (__q))
+#define CPE_Q_MASK(__q)  ((__q) & 0x3)
+#define RME_Q_MASK(__q)  ((__q) & 0x3)
+
+
+/*
+ * PCI MSI-X vector defines
+ */
+enum {
+    BFA_MSIX_CPE_Q0 = 0,
+    BFA_MSIX_CPE_Q1 = 1,
+    BFA_MSIX_CPE_Q2 = 2,
+    BFA_MSIX_CPE_Q3 = 3,
+    BFA_MSIX_RME_Q0 = 4,
+    BFA_MSIX_RME_Q1 = 5,
+    BFA_MSIX_RME_Q2 = 6,
+    BFA_MSIX_RME_Q3 = 7,
+    BFA_MSIX_LPU_ERR = 8,
+    BFA_MSIX_CT_MAX = 9,
+};
+
+/*
+ * And corresponding host interrupt status bit field defines
+ */
+#define __HFN_INT_CPE_Q0                   0x00000001U
+#define __HFN_INT_CPE_Q1                   0x00000002U
+#define __HFN_INT_CPE_Q2                   0x00000004U
+#define __HFN_INT_CPE_Q3                   0x00000008U
+#define __HFN_INT_CPE_Q4                   0x00000010U
+#define __HFN_INT_CPE_Q5                   0x00000020U
+#define __HFN_INT_CPE_Q6                   0x00000040U
+#define __HFN_INT_CPE_Q7                   0x00000080U
+#define __HFN_INT_RME_Q0                   0x00000100U
+#define __HFN_INT_RME_Q1                   0x00000200U
+#define __HFN_INT_RME_Q2                   0x00000400U
+#define __HFN_INT_RME_Q3                   0x00000800U
+#define __HFN_INT_RME_Q4                   0x00001000U
+#define __HFN_INT_RME_Q5                   0x00002000U
+#define __HFN_INT_RME_Q6                   0x00004000U
+#define __HFN_INT_RME_Q7                   0x00008000U
+#define __HFN_INT_ERR_EMC                  0x00010000U
+#define __HFN_INT_ERR_LPU0                 0x00020000U
+#define __HFN_INT_ERR_LPU1                 0x00040000U
+#define __HFN_INT_ERR_PSS                  0x00080000U
+#define __HFN_INT_MBOX_LPU0                0x00100000U
+#define __HFN_INT_MBOX_LPU1                0x00200000U
+#define __HFN_INT_MBOX1_LPU0               0x00400000U
+#define __HFN_INT_MBOX1_LPU1               0x00800000U
+#define __HFN_INT_CPE_MASK                 0x000000ffU
+#define __HFN_INT_RME_MASK                 0x0000ff00U
+
+
+/*
+ * catapult memory map.
+ */
+#define LL_PGN_HQM0                      0x0096
+#define LL_PGN_HQM1                      0x0097
+#define PSS_SMEM_PAGE_START	0x8000
+#define PSS_SMEM_PGNUM(_pg0, _ma)	((_pg0) + ((_ma) >> 15))
+#define PSS_SMEM_PGOFF(_ma)	((_ma) & 0x7fff)
+
+/*
+ * End of catapult memory map
+ */
+
+
+#endif /* __BFI_CTREG_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fabric.h b/drivers/scsi/bfa/include/bfi/bfi_fabric.h
new file mode 100644
index 000000000000..c0669ed41078
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_fabric.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_FABRIC_H__
+#define __BFI_FABRIC_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_fabric_h2i_msgs {
+	BFI_FABRIC_H2I_CREATE_REQ	= 1,
+	BFI_FABRIC_H2I_DELETE_REQ	= 2,
+	BFI_FABRIC_H2I_SETAUTH		= 3,
+};
+
+enum bfi_fabric_i2h_msgs {
+	BFI_FABRIC_I2H_CREATE_RSP	= BFA_I2HM(1),
+	BFI_FABRIC_I2H_DELETE_RSP	= BFA_I2HM(2),
+	BFI_FABRIC_I2H_SETAUTH_RSP	= BFA_I2HM(3),
+	BFI_FABRIC_I2H_ONLINE		= BFA_I2HM(4),
+	BFI_FABRIC_I2H_OFFLINE		= BFA_I2HM(5),
+};
+
+struct bfi_fabric_create_req_s {
+	bfi_mhdr_t	mh;		/*  common msg header		*/
+	u8         vf_en;		/*  virtual fabric enable	*/
+	u8         rsvd;
+	u16        vf_id;		/*  virtual fabric ID		*/
+	wwn_t		pwwn;		/*  port name			*/
+	wwn_t		nwwn;		/*  node name			*/
+};
+
+struct bfi_fabric_create_rsp_s {
+	bfi_mhdr_t	mh;		/*  common msg header		*/
+	u16        bfa_handle;	/*  host fabric handle		*/
+	u8         status;		/*  fabric create status	*/
+	u8         rsvd;
+};
+
+struct bfi_fabric_delete_req_s {
+	bfi_mhdr_t	mh;		/*  common msg header		*/
+	u16        fw_handle;	/*  firmware fabric handle	*/
+	u16        rsvd;
+};
+
+struct bfi_fabric_delete_rsp_s {
+	bfi_mhdr_t	mh;		/*  common msg header		*/
+	u16        bfa_handle;	/*  host fabric handle		*/
+	u8         status;		/*  fabric deletion status	*/
+	u8         rsvd;
+};
+
+#define BFI_FABRIC_AUTHSECRET_LEN	64
+struct bfi_fabric_setauth_req_s {
+	bfi_mhdr_t	mh;		/*  common msg header		*/
+	u16        fw_handle;	/*  f/w handle of fabric	*/
+	u8		algorithm;
+	u8		group;
+	u8		secret[BFI_FABRIC_AUTHSECRET_LEN];
+};
+
+union bfi_fabric_h2i_msg_u {
+	bfi_msg_t		*msg;
+	struct bfi_fabric_create_req_s	*create_req;
+	struct bfi_fabric_delete_req_s	*delete_req;
+};
+
+union bfi_fabric_i2h_msg_u {
+	bfi_msg_t		*msg;
+	struct bfi_fabric_create_rsp_s	*create_rsp;
+	struct bfi_fabric_delete_rsp_s	*delete_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_FABRIC_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fcpim.h b/drivers/scsi/bfa/include/bfi/bfi_fcpim.h
new file mode 100644
index 000000000000..52c059fb4c3a
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_fcpim.h
@@ -0,0 +1,301 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_FCPIM_H__
+#define __BFI_FCPIM_H__
+
+#include "bfi.h"
+#include <protocol/fcp.h>
+
+#pragma pack(1)
+
+/*
+ * Initiator mode I-T nexus interface defines.
+ */
+
+enum bfi_itnim_h2i {
+	BFI_ITNIM_H2I_CREATE_REQ = 1,	/*  i-t nexus creation */
+	BFI_ITNIM_H2I_DELETE_REQ = 2,	/*  i-t nexus deletion */
+};
+
+enum bfi_itnim_i2h {
+	BFI_ITNIM_I2H_CREATE_RSP = BFA_I2HM(1),
+	BFI_ITNIM_I2H_DELETE_RSP = BFA_I2HM(2),
+	BFI_ITNIM_I2H_SLER_EVENT = BFA_I2HM(3),
+};
+
+struct bfi_itnim_create_req_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		 */
+	u16        fw_handle;	/*  f/w handle for itnim	 */
+	u8         class;		/*  FC class for IO		 */
+	u8         seq_rec;	/*  sequence recovery support	 */
+	u8         msg_no;		/*  seq id of the msg		 */
+};
+
+struct bfi_itnim_create_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		 */
+	u16        bfa_handle;	/*  bfa handle for itnim	 */
+	u8         status;		/*  fcp request status		 */
+	u8         seq_id;		/*  seq id of the msg		 */
+};
+
+struct bfi_itnim_delete_req_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		 */
+	u16        fw_handle;	/*  f/w itnim handle		 */
+	u8         seq_id;		/*  seq id of the msg		 */
+	u8         rsvd;
+};
+
+struct bfi_itnim_delete_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		 */
+	u16        bfa_handle;	/*  bfa handle for itnim	 */
+	u8         status;		/*  fcp request status		 */
+	u8         seq_id;		/*  seq id of the msg		 */
+};
+
+struct bfi_itnim_sler_event_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		 */
+	u16        bfa_handle;	/*  bfa handle for itnim	 */
+	u16        rsvd;
+};
+
+union bfi_itnim_h2i_msg_u {
+	struct bfi_itnim_create_req_s *create_req;
+	struct bfi_itnim_delete_req_s *delete_req;
+	struct bfi_msg_s      *msg;
+};
+
+union bfi_itnim_i2h_msg_u {
+	struct bfi_itnim_create_rsp_s *create_rsp;
+	struct bfi_itnim_delete_rsp_s *delete_rsp;
+	struct bfi_itnim_sler_event_s *sler_event;
+	struct bfi_msg_s      *msg;
+};
+
+/*
+ * Initiator mode IO interface defines.
+ */
+
+enum bfi_ioim_h2i {
+	BFI_IOIM_H2I_IOABORT_REQ = 1,	/*  IO abort request	 */
+	BFI_IOIM_H2I_IOCLEANUP_REQ = 2,	/*  IO cleanup request	 */
+};
+
+enum bfi_ioim_i2h {
+	BFI_IOIM_I2H_IO_RSP = BFA_I2HM(1),	/*  non-fp IO response	 */
+	BFI_IOIM_I2H_IOABORT_RSP = BFA_I2HM(2),/*  ABORT rsp	 */
+};
+
+/**
+ * IO command DIF info
+ */
+struct bfi_ioim_dif_s {
+	u32	dif_info[4];
+};
+
+/**
+ * FCP IO messages overview
+ *
+ * @note
+ * - Max CDB length supported is 64 bytes.
+ * - SCSI Linked commands and SCSI bi-directional Commands not
+ * 	 supported.
+ *
+ */
+struct bfi_ioim_req_s {
+	struct bfi_mhdr_s  mh;		/*  Common msg header		 */
+	u16        io_tag;		/*  I/O tag			 */
+	u16        rport_hdl;	/*  itnim/rport firmware handle */
+	struct fcp_cmnd_s cmnd;		/*  IO request info		 */
+
+	/**
+	 * SG elements array within the IO request must be double word
+	 * aligned. This aligment is required to optimize SGM setup for the IO.
+	 */
+	struct bfi_sge_s   sges[BFI_SGE_INLINE_MAX];
+	u8         io_timeout;
+	u8         dif_en;
+	u8         rsvd_a[2];
+	struct bfi_ioim_dif_s  dif;
+};
+
+/**
+ * 	This table shows various IO status codes from firmware and their
+ *	meaning. Host driver can use these status codes to further process
+ *	IO completions.
+ *
+ * 	BFI_IOIM_STS_OK		: IO completed with error free SCSI &
+ *					   transport status.
+ * 					   - io-tag can be reused.
+ *
+ * 	BFA_IOIM_STS_SCSI_ERR		: IO completed with scsi error.
+ * 					  - io-tag can be reused.
+ *
+ * 	BFI_IOIM_STS_HOST_ABORTED	: IO was aborted successfully due to
+ *					   host request.
+ * 					   - io-tag cannot be reused yet.
+ *
+ * 	BFI_IOIM_STS_ABORTED		: IO was aborted successfully
+ *					   internally by f/w.
+ * 					   - io-tag cannot be reused yet.
+ *
+ * 	BFI_IOIM_STS_TIMEDOUT	: IO timedout and ABTS/RRQ is happening
+ *					   in the firmware and
+ * 					   - io-tag cannot be reused yet.
+ *
+ * 	BFI_IOIM_STS_SQER_NEEDED	: Firmware could not recover the IO
+ *					  with sequence level error
+ * 					  logic and hence host needs to retry
+ *					  this IO with a different IO tag
+ * 					  - io-tag cannot be used yet.
+ *
+ * 	BFI_IOIM_STS_NEXUS_ABORT	: Second Level Error Recovery from host
+ *					  is required because 2 consecutive ABTS
+ *					  timedout and host needs logout and
+ *					  re-login with the target
+ * 					  - io-tag cannot be used yet.
+ *
+ * 	BFI_IOIM_STS_UNDERRUN	: IO completed with SCSI status good,
+ *					  but the data tranferred is less than
+ *					  the fcp data length in the command.
+ *					  ex. SCSI INQUIRY where transferred
+ *					  data length and residue count in FCP
+ *					  response accounts for total fcp-dl
+ * 					  - io-tag can be reused.
+ *
+ * 	BFI_IOIM_STS_OVERRUN	: IO completed with SCSI status good,
+ *					  but the data transerred is more than
+ *					  fcp data length in the command. ex.
+ *					  TAPE IOs where blocks can of unequal
+ *					  lengths.
+ * 					  - io-tag can be reused.
+ *
+ * 	BFI_IOIM_STS_RES_FREE	: Firmware has completed using io-tag
+ *					  during abort process
+ * 					  - io-tag can be reused.
+ *
+ * 	BFI_IOIM_STS_PROTO_ERR	: Firmware detected a protocol error.
+ *					  ex target sent more data than
+ *					  requested, or there was data frame
+ *					  loss and other reasons
+ * 					  - io-tag cannot be used yet.
+ *
+ * 	BFI_IOIM_STS_DIF_ERR	: Firwmare detected DIF error. ex: DIF
+ * 					  CRC err or Ref Tag err or App tag err.
+ * 					  - io-tag can be reused.
+ *
+ * 	BFA_IOIM_STS_TSK_MGT_ABORT	: IO was aborted because of Task
+ *					  Management command from the host
+ * 					  - io-tag can be reused.
+ *
+ * 	BFI_IOIM_STS_UTAG		: Firmware does not know about this
+ *					  io_tag.
+ * 					  - io-tag can be reused.
+ */
+enum bfi_ioim_status {
+	BFI_IOIM_STS_OK = 0,
+	BFI_IOIM_STS_HOST_ABORTED = 1,
+	BFI_IOIM_STS_ABORTED = 2,
+	BFI_IOIM_STS_TIMEDOUT = 3,
+	BFI_IOIM_STS_RES_FREE = 4,
+	BFI_IOIM_STS_SQER_NEEDED = 5,
+	BFI_IOIM_STS_PROTO_ERR = 6,
+	BFI_IOIM_STS_UTAG = 7,
+	BFI_IOIM_STS_PATHTOV = 8,
+};
+
+#define BFI_IOIM_SNSLEN	(256)
+/**
+ * I/O response message
+ */
+struct bfi_ioim_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header	 	 */
+	u16        io_tag;		/*  completed IO tag		 */
+	u16        bfa_rport_hndl;	/*  releated rport handle	 */
+	u8         io_status;	/*  IO completion status	 */
+	u8         reuse_io_tag;	/*  IO tag can be reused        */
+	u16	abort_tag;	/*  host abort request tag      */
+	u8		scsi_status;	/*  scsi status from target	 */
+	u8		sns_len;	/*  scsi sense length		 */
+	u8		resid_flags;	/*  IO residue flags		 */
+	u8		rsvd_a;
+	u32	residue;	/*  IO residual length in bytes */
+	u32	rsvd_b[3];
+};
+
+struct bfi_ioim_abort_req_s {
+	struct bfi_mhdr_s  mh;          /*  Common msg header  */
+	u16        io_tag;         /*  I/O tag            */
+	u16        abort_tag;      /*  unique request tag */
+};
+
+/*
+ * Initiator mode task management command interface defines.
+ */
+
+enum bfi_tskim_h2i {
+	BFI_TSKIM_H2I_TM_REQ    = 1, /*  task-mgmt command         */
+	BFI_TSKIM_H2I_ABORT_REQ = 2, /*  task-mgmt command         */
+};
+
+enum bfi_tskim_i2h {
+	BFI_TSKIM_I2H_TM_RSP = BFA_I2HM(1),
+};
+
+struct bfi_tskim_req_s {
+	struct bfi_mhdr_s  mh;             /*  Common msg header          */
+	u16        tsk_tag;        /*  task management tag        */
+	u16        itn_fhdl;       /*  itn firmware handle        */
+	lun_t           lun;            /*  LU number                  */
+	u8         tm_flags;       /*  see fcp_tm_cmnd_t          */
+	u8         t_secs;         /*  Timeout value in seconds   */
+	u8         rsvd[2];
+};
+
+struct bfi_tskim_abortreq_s {
+	struct bfi_mhdr_s  mh;             /*  Common msg header          */
+	u16        tsk_tag;        /*  task management tag        */
+	u16        rsvd;
+};
+
+enum bfi_tskim_status {
+	/*
+	 * Following are FCP-4 spec defined status codes,
+	 * **DO NOT CHANGE THEM **
+	 */
+	BFI_TSKIM_STS_OK       = 0,
+	BFI_TSKIM_STS_NOT_SUPP = 4,
+	BFI_TSKIM_STS_FAILED   = 5,
+
+	/**
+	 * Defined by BFA
+	 */
+	BFI_TSKIM_STS_TIMEOUT  = 10,    /*  TM request timedout     */
+	BFI_TSKIM_STS_ABORTED  = 11,    /*  Aborted on host request */
+};
+
+struct bfi_tskim_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  Common msg header		 */
+	u16        tsk_tag;	/*  task mgmt cmnd tag		 */
+	u8         tsk_status;	/*  @ref bfi_tskim_status */
+	u8         rsvd;
+};
+
+#pragma pack()
+
+#endif /* __BFI_FCPIM_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fcxp.h b/drivers/scsi/bfa/include/bfi/bfi_fcxp.h
new file mode 100644
index 000000000000..e0e995a32828
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_fcxp.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_FCXP_H__
+#define __BFI_FCXP_H__
+
+#include "bfi.h"
+
+#pragma pack(1)
+
+enum bfi_fcxp_h2i {
+	BFI_FCXP_H2I_SEND_REQ = 1,
+};
+
+enum bfi_fcxp_i2h {
+	BFI_FCXP_I2H_SEND_RSP = BFA_I2HM(1),
+};
+
+#define BFA_FCXP_MAX_SGES	2
+
+/**
+ * FCXP send request structure
+ */
+struct bfi_fcxp_send_req_s {
+	struct bfi_mhdr_s  mh;		/*  Common msg header		    */
+	u16        fcxp_tag;	/*  driver request tag		    */
+	u16        max_frmsz;	/*  max send frame size	    */
+	u16        vf_id;		/*  vsan tag if applicable	    */
+	u16        rport_fw_hndl;	/*  FW Handle for the remote port  */
+	u8         class;		/*  FC class used for req/rsp	    */
+	u8         rsp_timeout;	/*  timeout in secs, 0-no response */
+	u8         cts;		/*  continue sequence		    */
+	u8         lp_tag;		/*  lport tag			    */
+	struct fchs_s   fchs;		/*  request FC header structure    */
+	u32        req_len;	/*  request payload length	    */
+	u32        rsp_maxlen;	/*  max response length expected   */
+	struct bfi_sge_s   req_sge[BFA_FCXP_MAX_SGES];	/*  request buf    */
+	struct bfi_sge_s   rsp_sge[BFA_FCXP_MAX_SGES];	/*  response buf   */
+};
+
+/**
+ * FCXP send response structure
+ */
+struct bfi_fcxp_send_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  Common msg header		    */
+	u16        fcxp_tag;	/*  send request tag		    */
+	u8         req_status;	/*  request status		    */
+	u8         rsvd;
+	u32        rsp_len;	/*  actual response length	    */
+	u32        residue_len;	/*  residual response length	    */
+	struct fchs_s   fchs;		/*  response FC header structure   */
+};
+
+#pragma pack()
+
+#endif /* __BFI_FCXP_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_ioc.h b/drivers/scsi/bfa/include/bfi/bfi_ioc.h
new file mode 100644
index 000000000000..026e9c06ae97
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_ioc.h
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_IOC_H__
+#define __BFI_IOC_H__
+
+#include "bfi.h"
+#include <defs/bfa_defs_ioc.h>
+
+#pragma pack(1)
+
+enum bfi_ioc_h2i_msgs {
+	BFI_IOC_H2I_ENABLE_REQ 		= 1,
+	BFI_IOC_H2I_DISABLE_REQ 	= 2,
+	BFI_IOC_H2I_GETATTR_REQ 	= 3,
+	BFI_IOC_H2I_DBG_SYNC	 	= 4,
+	BFI_IOC_H2I_DBG_DUMP	 	= 5,
+};
+
+enum bfi_ioc_i2h_msgs {
+	BFI_IOC_I2H_ENABLE_REPLY	= BFA_I2HM(1),
+	BFI_IOC_I2H_DISABLE_REPLY 	= BFA_I2HM(2),
+	BFI_IOC_I2H_GETATTR_REPLY 	= BFA_I2HM(3),
+	BFI_IOC_I2H_READY_EVENT 	= BFA_I2HM(4),
+	BFI_IOC_I2H_HBEAT		= BFA_I2HM(5),
+};
+
+/**
+ * BFI_IOC_H2I_GETATTR_REQ message
+ */
+struct bfi_ioc_getattr_req_s {
+	struct bfi_mhdr_s	mh;
+	union bfi_addr_u	attr_addr;
+};
+
+struct bfi_ioc_attr_s {
+	wwn_t           mfg_wwn;
+	mac_t		mfg_mac;
+	u16	rsvd_a;
+	char            brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)];
+	u8         pcie_gen;
+	u8         pcie_lanes_orig;
+	u8         pcie_lanes;
+	u8         rx_bbcredit;	/*  receive buffer credits */
+	u32        adapter_prop;	/*  adapter properties     */
+	u16        maxfrsize;	/*  max receive frame size */
+	char         	asic_rev;
+	u8         rsvd_b;
+	char            fw_version[BFA_VERSION_LEN];
+	char            optrom_version[BFA_VERSION_LEN];
+	struct bfa_mfg_vpd_s	vpd;
+};
+
+/**
+ * BFI_IOC_I2H_GETATTR_REPLY message
+ */
+struct bfi_ioc_getattr_reply_s {
+	struct bfi_mhdr_s  mh;		/*  Common msg header          */
+	u8		status;	/*  cfg reply status           */
+	u8		rsvd[3];
+};
+
+/**
+ * Firmware memory page offsets
+ */
+#define BFI_IOC_SMEM_PG0_CB	(0x40)
+#define BFI_IOC_SMEM_PG0_CT	(0x180)
+
+/**
+ * Firmware trace offset
+ */
+#define BFI_IOC_TRC_OFF		(0x4b00)
+#define BFI_IOC_TRC_ENTS	256
+
+#define BFI_IOC_FW_SIGNATURE	(0xbfadbfad)
+#define BFI_IOC_MD5SUM_SZ	4
+struct bfi_ioc_image_hdr_s {
+	u32        signature;	/*  constant signature */
+	u32        rsvd_a;
+	u32        exec;		/*  exec vector        */
+	u32        param;		/*  parameters         */
+	u32        rsvd_b[4];
+	u32        md5sum[BFI_IOC_MD5SUM_SZ];
+};
+
+/**
+ *  BFI_IOC_I2H_READY_EVENT message
+ */
+struct bfi_ioc_rdy_event_s {
+	struct bfi_mhdr_s  mh;			/*  common msg header */
+	u8         init_status;	/*  init event status */
+	u8         rsvd[3];
+};
+
+struct bfi_ioc_hbeat_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u32	   hb_count;	/*  current heart beat count	*/
+};
+
+/**
+ * IOC hardware/firmware state
+ */
+enum bfi_ioc_state {
+	BFI_IOC_UNINIT 	 = 0,		/*  not initialized                 */
+	BFI_IOC_INITING 	 = 1,	/*  h/w is being initialized        */
+	BFI_IOC_HWINIT 	 = 2,		/*  h/w is initialized              */
+	BFI_IOC_CFG 	 = 3,		/*  IOC configuration in progress   */
+	BFI_IOC_OP 		 = 4,	/*  IOC is operational              */
+	BFI_IOC_DISABLING 	 = 5,	/*  IOC is being disabled           */
+	BFI_IOC_DISABLED 	 = 6,	/*  IOC is disabled                 */
+	BFI_IOC_CFG_DISABLED = 7,	/*  IOC is being disabled;transient */
+	BFI_IOC_HBFAIL       = 8,	/*  IOC heart-beat failure          */
+	BFI_IOC_MEMTEST      = 9,	/*  IOC is doing memtest            */
+};
+
+#define BFI_IOC_ENDIAN_SIG  0x12345678
+
+enum {
+	BFI_ADAPTER_TYPE_FC   = 0x01,		/*  FC adapters           */
+	BFI_ADAPTER_TYPE_MK   = 0x0f0000,	/*  adapter type mask     */
+	BFI_ADAPTER_TYPE_SH   = 16,	        /*  adapter type shift    */
+	BFI_ADAPTER_NPORTS_MK = 0xff00,		/*  number of ports mask  */
+	BFI_ADAPTER_NPORTS_SH = 8,	        /*  number of ports shift */
+	BFI_ADAPTER_SPEED_MK  = 0xff,		/*  adapter speed mask    */
+	BFI_ADAPTER_SPEED_SH  = 0,	        /*  adapter speed shift   */
+	BFI_ADAPTER_PROTO     = 0x100000,	/*  prototype adapaters   */
+	BFI_ADAPTER_TTV       = 0x200000,	/*  TTV debug capable     */
+	BFI_ADAPTER_UNSUPP    = 0x400000,	/*  unknown adapter type  */
+};
+
+#define BFI_ADAPTER_GETP(__prop,__adap_prop)          		\
+    (((__adap_prop) & BFI_ADAPTER_ ## __prop ## _MK) >>         \
+     BFI_ADAPTER_ ## __prop ## _SH)
+#define BFI_ADAPTER_SETP(__prop, __val)         		\
+    ((__val) << BFI_ADAPTER_ ## __prop ## _SH)
+#define BFI_ADAPTER_IS_PROTO(__adap_type)   			\
+    ((__adap_type) & BFI_ADAPTER_PROTO)
+#define BFI_ADAPTER_IS_TTV(__adap_type)     			\
+    ((__adap_type) & BFI_ADAPTER_TTV)
+#define BFI_ADAPTER_IS_UNSUPP(__adap_type)  			\
+    ((__adap_type) & BFI_ADAPTER_UNSUPP)
+#define BFI_ADAPTER_IS_SPECIAL(__adap_type)                     \
+    ((__adap_type) & (BFI_ADAPTER_TTV | BFI_ADAPTER_PROTO |     \
+			BFI_ADAPTER_UNSUPP))
+
+/**
+ * BFI_IOC_H2I_ENABLE_REQ & BFI_IOC_H2I_DISABLE_REQ messages
+ */
+struct bfi_ioc_ctrl_req_s {
+	struct bfi_mhdr_s	mh;
+	u8			ioc_class;
+	u8         	rsvd[3];
+};
+
+/**
+ * BFI_IOC_I2H_ENABLE_REPLY & BFI_IOC_I2H_DISABLE_REPLY messages
+ */
+struct bfi_ioc_ctrl_reply_s {
+	struct bfi_mhdr_s  mh;		/*  Common msg header     */
+	u8         status;		/*  enable/disable status */
+	u8         rsvd[3];
+};
+
+#define BFI_IOC_MSGSZ   8
+/**
+ * H2I Messages
+ */
+union bfi_ioc_h2i_msg_u {
+	struct bfi_mhdr_s 	mh;
+	struct bfi_ioc_ctrl_req_s enable_req;
+	struct bfi_ioc_ctrl_req_s disable_req;
+	struct bfi_ioc_getattr_req_s getattr_req;
+	u32       		mboxmsg[BFI_IOC_MSGSZ];
+};
+
+/**
+ * I2H Messages
+ */
+union bfi_ioc_i2h_msg_u {
+	struct bfi_mhdr_s      	mh;
+	struct bfi_ioc_rdy_event_s 	rdy_event;
+	u32       		mboxmsg[BFI_IOC_MSGSZ];
+};
+
+#pragma pack()
+
+#endif /* __BFI_IOC_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_iocfc.h b/drivers/scsi/bfa/include/bfi/bfi_iocfc.h
new file mode 100644
index 000000000000..c3760df72575
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_iocfc.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_IOCFC_H__
+#define __BFI_IOCFC_H__
+
+#include "bfi.h"
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_iocfc.h>
+#include <defs/bfa_defs_boot.h>
+
+#pragma pack(1)
+
+enum bfi_iocfc_h2i_msgs {
+	BFI_IOCFC_H2I_CFG_REQ 		= 1,
+	BFI_IOCFC_H2I_GET_STATS_REQ 	= 2,
+	BFI_IOCFC_H2I_CLEAR_STATS_REQ	= 3,
+	BFI_IOCFC_H2I_SET_INTR_REQ 	= 4,
+	BFI_IOCFC_H2I_UPDATEQ_REQ = 5,
+};
+
+enum bfi_iocfc_i2h_msgs {
+	BFI_IOCFC_I2H_CFG_REPLY		= BFA_I2HM(1),
+	BFI_IOCFC_I2H_GET_STATS_RSP 	= BFA_I2HM(2),
+	BFI_IOCFC_I2H_CLEAR_STATS_RSP	= BFA_I2HM(3),
+	BFI_IOCFC_I2H_UPDATEQ_RSP = BFA_I2HM(5),
+};
+
+struct bfi_iocfc_cfg_s {
+	u8         num_cqs; 	/*  Number of CQs to be used     */
+	u8         sense_buf_len;	/*  SCSI sense length            */
+	u8         trunk_enabled;	/*  port trunking enabled        */
+	u8         trunk_ports;	/*  trunk ports bit map          */
+	u32        endian_sig;	/*  endian signature of host     */
+
+	/**
+	 * Request and response circular queue base addresses, size and
+	 * shadow index pointers.
+	 */
+	union bfi_addr_u  req_cq_ba[BFI_IOC_MAX_CQS];
+	union bfi_addr_u  req_shadow_ci[BFI_IOC_MAX_CQS];
+	u16    req_cq_elems[BFI_IOC_MAX_CQS];
+	union bfi_addr_u  rsp_cq_ba[BFI_IOC_MAX_CQS];
+	union bfi_addr_u  rsp_shadow_pi[BFI_IOC_MAX_CQS];
+	u16    rsp_cq_elems[BFI_IOC_MAX_CQS];
+
+	union bfi_addr_u  stats_addr;	/*  DMA-able address for stats	  */
+	union bfi_addr_u  cfgrsp_addr;	/*  config response dma address  */
+	union bfi_addr_u  ioim_snsbase;  /*  IO sense buffer base address */
+	struct bfa_iocfc_intr_attr_s intr_attr; /*  IOC interrupt attributes */
+};
+
+/**
+ * Boot target wwn information for this port. This contains either the stored
+ * or discovered boot target port wwns for the port.
+ */
+struct bfi_iocfc_bootwwns {
+	wwn_t		wwn[BFA_BOOT_BOOTLUN_MAX];
+	u8		nwwns;
+	u8		rsvd[7];
+};
+
+struct bfi_iocfc_cfgrsp_s {
+	struct bfa_iocfc_fwcfg_s	fwcfg;
+	struct bfa_iocfc_intr_attr_s	intr_attr;
+	struct bfi_iocfc_bootwwns	bootwwns;
+};
+
+/**
+ * BFI_IOCFC_H2I_CFG_REQ message
+ */
+struct bfi_iocfc_cfg_req_s {
+	struct bfi_mhdr_s      mh;
+	union bfi_addr_u      ioc_cfg_dma_addr;
+};
+
+/**
+ * BFI_IOCFC_I2H_CFG_REPLY message
+ */
+struct bfi_iocfc_cfg_reply_s {
+	struct bfi_mhdr_s  mh;		/*  Common msg header          */
+	u8         cfg_success;	/*  cfg reply status           */
+	u8         lpu_bm;		/*  LPUs assigned for this IOC */
+	u8         rsvd[2];
+};
+
+/**
+ *  BFI_IOCFC_H2I_GET_STATS_REQ & BFI_IOCFC_H2I_CLEAR_STATS_REQ messages
+ */
+struct bfi_iocfc_stats_req_s {
+	struct bfi_mhdr_s mh;		/*  msg header            */
+	u32        msgtag;		/*  msgtag for reply      */
+};
+
+/**
+ * BFI_IOCFC_I2H_GET_STATS_RSP & BFI_IOCFC_I2H_CLEAR_STATS_RSP messages
+ */
+struct bfi_iocfc_stats_rsp_s {
+	struct bfi_mhdr_s mh;		/*  common msg header     */
+	u8         status;		/*  reply status          */
+	u8         rsvd[3];
+	u32        msgtag;		/*  msgtag for reply      */
+};
+
+/**
+ * BFI_IOCFC_H2I_SET_INTR_REQ message
+ */
+struct bfi_iocfc_set_intr_req_s {
+	struct bfi_mhdr_s mh;		/*  common msg header     */
+	u8		coalesce;	/*  enable intr coalescing*/
+	u8         rsvd[3];
+	u16	delay;		/*  delay timer 0..1125us  */
+	u16	latency;	/*  latency timer 0..225us */
+};
+
+/**
+ * BFI_IOCFC_H2I_UPDATEQ_REQ message
+ */
+struct bfi_iocfc_updateq_req_s {
+	struct bfi_mhdr_s mh;		/*  common msg header     */
+	u32 reqq_ba;			/*  reqq base addr        */
+	u32 rspq_ba;			/*  rspq base addr        */
+	u32 reqq_sci;			/*  reqq shadow ci        */
+	u32 rspq_spi;			/*  rspq shadow pi        */
+};
+
+/**
+ * BFI_IOCFC_I2H_UPDATEQ_RSP message
+ */
+struct bfi_iocfc_updateq_rsp_s {
+	struct bfi_mhdr_s mh;		/*  common msg header     */
+	u8         status;		/*  updateq  status       */
+	u8         rsvd[3];
+};
+
+/**
+ * H2I Messages
+ */
+union bfi_iocfc_h2i_msg_u {
+	struct bfi_mhdr_s 		mh;
+	struct bfi_iocfc_cfg_req_s 	cfg_req;
+	struct bfi_iocfc_stats_req_s stats_get;
+	struct bfi_iocfc_stats_req_s stats_clr;
+	struct bfi_iocfc_updateq_req_s updateq_req;
+	u32       			mboxmsg[BFI_IOC_MSGSZ];
+};
+
+/**
+ * I2H Messages
+ */
+union bfi_iocfc_i2h_msg_u {
+	struct bfi_mhdr_s      		mh;
+	struct bfi_iocfc_cfg_reply_s 		cfg_reply;
+	struct bfi_iocfc_stats_rsp_s stats_get_rsp;
+	struct bfi_iocfc_stats_rsp_s stats_clr_rsp;
+	struct bfi_iocfc_updateq_rsp_s updateq_rsp;
+	u32       			mboxmsg[BFI_IOC_MSGSZ];
+};
+
+#pragma pack()
+
+#endif /* __BFI_IOCFC_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_lport.h b/drivers/scsi/bfa/include/bfi/bfi_lport.h
new file mode 100644
index 000000000000..29010614bac9
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_lport.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_LPORT_H__
+#define __BFI_LPORT_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_lport_h2i_msgs {
+	BFI_LPORT_H2I_CREATE_REQ = 1,
+	BFI_LPORT_H2I_DELETE_REQ = 2,
+};
+
+enum bfi_lport_i2h_msgs {
+	BFI_LPORT_I2H_CREATE_RSP = BFA_I2HM(1),
+	BFI_LPORT_I2H_DELETE_RSP = BFA_I2HM(2),
+	BFI_LPORT_I2H_ONLINE	  = BFA_I2HM(3),
+	BFI_LPORT_I2H_OFFLINE	  = BFA_I2HM(4),
+};
+
+#define BFI_LPORT_MAX_SYNNAME	64
+
+enum bfi_lport_role_e {
+	BFI_LPORT_ROLE_FCPIM	= 1,
+	BFI_LPORT_ROLE_FCPTM	= 2,
+	BFI_LPORT_ROLE_IPFC	= 4,
+};
+
+struct bfi_lport_create_req_s {
+	bfi_mhdr_t	mh;		/*  common msg header		*/
+	u16	fabric_fwhdl;	/*  parent fabric instance	*/
+	u8		roles;		/*  lport FC-4 roles		*/
+	u8		rsvd;
+	wwn_t		pwwn;		/*  port name			*/
+	wwn_t		nwwn;		/*  node name			*/
+	u8		symname[BFI_LPORT_MAX_SYNNAME];
+};
+
+struct bfi_lport_create_rsp_s {
+	bfi_mhdr_t	mh;		/*  common msg header		*/
+	u8         status;		/*  lport creation status	*/
+	u8         rsvd[3];
+};
+
+struct bfi_lport_delete_req_s {
+	bfi_mhdr_t	mh;		/*  common msg header		*/
+	u16        fw_handle;	/*  firmware lport handle	*/
+	u16        rsvd;
+};
+
+struct bfi_lport_delete_rsp_s {
+	bfi_mhdr_t	mh;		/*  common msg header		*/
+	u16        bfa_handle;	/*  host lport handle		*/
+	u8         status;		/*  lport deletion status	*/
+	u8         rsvd;
+};
+
+union bfi_lport_h2i_msg_u {
+	bfi_msg_t		*msg;
+	struct bfi_lport_create_req_s	*create_req;
+	struct bfi_lport_delete_req_s	*delete_req;
+};
+
+union bfi_lport_i2h_msg_u {
+	bfi_msg_t		*msg;
+	struct bfi_lport_create_rsp_s	*create_rsp;
+	struct bfi_lport_delete_rsp_s	*delete_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_LPORT_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_lps.h b/drivers/scsi/bfa/include/bfi/bfi_lps.h
new file mode 100644
index 000000000000..414b0e30f6ef
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_lps.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_LPS_H__
+#define __BFI_LPS_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_lps_h2i_msgs {
+	BFI_LPS_H2I_LOGIN_REQ	= 1,
+	BFI_LPS_H2I_LOGOUT_REQ	= 2,
+};
+
+enum bfi_lps_i2h_msgs {
+	BFI_LPS_H2I_LOGIN_RSP	= BFA_I2HM(1),
+	BFI_LPS_H2I_LOGOUT_RSP	= BFA_I2HM(2),
+};
+
+struct bfi_lps_login_req_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u8		lp_tag;
+	u8		alpa;
+	u16	pdu_size;
+	wwn_t		pwwn;
+	wwn_t		nwwn;
+	u8		fdisc;
+	u8		auth_en;
+	u8		rsvd[2];
+};
+
+struct bfi_lps_login_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u8		lp_tag;
+	u8		status;
+	u8		lsrjt_rsn;
+	u8		lsrjt_expl;
+	wwn_t		port_name;
+	wwn_t		node_name;
+	u16	bb_credit;
+	u8		f_port;
+	u8		npiv_en;
+	u32	lp_pid : 24;
+	u32	auth_req : 8;
+	mac_t		lp_mac;
+	mac_t		fcf_mac;
+	u8		ext_status;
+	u8  	brcd_switch;/*  attached peer is brcd switch	*/
+};
+
+struct bfi_lps_logout_req_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u8		lp_tag;
+	u8		rsvd[3];
+	wwn_t		port_name;
+};
+
+struct bfi_lps_logout_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u8		lp_tag;
+	u8		status;
+	u8		rsvd[2];
+};
+
+union bfi_lps_h2i_msg_u {
+	struct bfi_mhdr_s		*msg;
+	struct bfi_lps_login_req_s	*login_req;
+	struct bfi_lps_logout_req_s	*logout_req;
+};
+
+union bfi_lps_i2h_msg_u {
+	struct bfi_msg_s		*msg;
+	struct bfi_lps_login_rsp_s	*login_rsp;
+	struct bfi_lps_logout_rsp_s	*logout_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_LPS_H__ */
+
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_port.h b/drivers/scsi/bfa/include/bfi/bfi_port.h
new file mode 100644
index 000000000000..3ec3bea110ba
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_port.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFI_PORT_H__
+#define __BFI_PORT_H__
+
+#include <bfi/bfi.h>
+#include <defs/bfa_defs_pport.h>
+
+#pragma pack(1)
+
+enum bfi_port_h2i {
+	BFI_PORT_H2I_ENABLE_REQ		= (1),
+	BFI_PORT_H2I_DISABLE_REQ	= (2),
+	BFI_PORT_H2I_GET_STATS_REQ	= (3),
+	BFI_PORT_H2I_CLEAR_STATS_REQ	= (4),
+};
+
+enum bfi_port_i2h {
+	BFI_PORT_I2H_ENABLE_RSP		= BFA_I2HM(1),
+	BFI_PORT_I2H_DISABLE_RSP	= BFA_I2HM(2),
+	BFI_PORT_I2H_GET_STATS_RSP	= BFA_I2HM(3),
+	BFI_PORT_I2H_CLEAR_STATS_RSP	= BFA_I2HM(4),
+};
+
+/**
+ * Generic REQ type
+ */
+struct bfi_port_generic_req_s {
+	struct bfi_mhdr_s  mh;		/*  msg header			    */
+	u32        msgtag;		/*  msgtag for reply		    */
+	u32	rsvd;
+};
+
+/**
+ * Generic RSP type
+ */
+struct bfi_port_generic_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		    */
+	u8         status;		/*  port enable status		    */
+	u8         rsvd[3];
+	u32        msgtag;		/*  msgtag for reply		    */
+};
+
+/**
+ * @todo
+ * BFI_PORT_H2I_ENABLE_REQ
+ */
+
+/**
+ * @todo
+ * BFI_PORT_I2H_ENABLE_RSP
+ */
+
+/**
+ * BFI_PORT_H2I_DISABLE_REQ
+ */
+
+/**
+ * BFI_PORT_I2H_DISABLE_RSP
+ */
+
+/**
+ * BFI_PORT_H2I_GET_STATS_REQ
+ */
+struct bfi_port_get_stats_req_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		    */
+	union bfi_addr_u   dma_addr;
+};
+
+/**
+ * BFI_PORT_I2H_GET_STATS_RSP
+ */
+
+/**
+ * BFI_PORT_H2I_CLEAR_STATS_REQ
+ */
+
+/**
+ * BFI_PORT_I2H_CLEAR_STATS_RSP
+ */
+
+union bfi_port_h2i_msg_u {
+	struct bfi_mhdr_s		mh;
+	struct bfi_port_generic_req_s	enable_req;
+	struct bfi_port_generic_req_s	disable_req;
+	struct bfi_port_get_stats_req_s	getstats_req;
+	struct bfi_port_generic_req_s	clearstats_req;
+};
+
+union bfi_port_i2h_msg_u {
+	struct bfi_mhdr_s         	mh;
+	struct bfi_port_generic_rsp_s	enable_rsp;
+	struct bfi_port_generic_rsp_s	disable_rsp;
+	struct bfi_port_generic_rsp_s	getstats_rsp;
+	struct bfi_port_generic_rsp_s	clearstats_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_PORT_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_pport.h b/drivers/scsi/bfa/include/bfi/bfi_pport.h
new file mode 100644
index 000000000000..c96d246851af
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_pport.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFI_PPORT_H__
+#define __BFI_PPORT_H__
+
+#include <bfi/bfi.h>
+#include <defs/bfa_defs_pport.h>
+
+#pragma pack(1)
+
+enum bfi_pport_h2i {
+	BFI_PPORT_H2I_ENABLE_REQ		= (1),
+	BFI_PPORT_H2I_DISABLE_REQ		= (2),
+	BFI_PPORT_H2I_GET_STATS_REQ		= (3),
+	BFI_PPORT_H2I_CLEAR_STATS_REQ	= (4),
+	BFI_PPORT_H2I_SET_SVC_PARAMS_REQ	= (5),
+	BFI_PPORT_H2I_ENABLE_RX_VF_TAG_REQ	= (6),
+	BFI_PPORT_H2I_ENABLE_TX_VF_TAG_REQ	= (7),
+	BFI_PPORT_H2I_GET_QOS_STATS_REQ		= (8),
+	BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ	= (9),
+};
+
+enum bfi_pport_i2h {
+	BFI_PPORT_I2H_ENABLE_RSP		= BFA_I2HM(1),
+	BFI_PPORT_I2H_DISABLE_RSP		= BFA_I2HM(2),
+	BFI_PPORT_I2H_GET_STATS_RSP		= BFA_I2HM(3),
+	BFI_PPORT_I2H_CLEAR_STATS_RSP	= BFA_I2HM(4),
+	BFI_PPORT_I2H_SET_SVC_PARAMS_RSP	= BFA_I2HM(5),
+	BFI_PPORT_I2H_ENABLE_RX_VF_TAG_RSP	= BFA_I2HM(6),
+	BFI_PPORT_I2H_ENABLE_TX_VF_TAG_RSP	= BFA_I2HM(7),
+	BFI_PPORT_I2H_EVENT			= BFA_I2HM(8),
+	BFI_PPORT_I2H_GET_QOS_STATS_RSP		= BFA_I2HM(9),
+	BFI_PPORT_I2H_CLEAR_QOS_STATS_RSP	= BFA_I2HM(10),
+};
+
+/**
+ * Generic REQ type
+ */
+struct bfi_pport_generic_req_s {
+	struct bfi_mhdr_s  mh;		/*  msg header			    */
+	u32        msgtag;		/*  msgtag for reply		    */
+};
+
+/**
+ * Generic RSP type
+ */
+struct bfi_pport_generic_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		    */
+	u8         status;		/*  port enable status		    */
+	u8         rsvd[3];
+	u32        msgtag;		/*  msgtag for reply		    */
+};
+
+/**
+ * BFI_PPORT_H2I_ENABLE_REQ
+ */
+struct bfi_pport_enable_req_s {
+	struct bfi_mhdr_s  mh;		/*  msg header			    */
+	u32        rsvd1;
+	wwn_t           nwwn;		/*  node wwn of physical port	    */
+	wwn_t           pwwn;		/*  port wwn of physical port	    */
+	struct bfa_pport_cfg_s port_cfg;	/*  port configuration	    */
+	union bfi_addr_u  stats_dma_addr;	/*  DMA address for stats  */
+	u32        msgtag;		/*  msgtag for reply		    */
+	u32        rsvd2;
+};
+
+/**
+ * BFI_PPORT_I2H_ENABLE_RSP
+ */
+#define bfi_pport_enable_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_DISABLE_REQ
+ */
+#define bfi_pport_disable_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_I2H_DISABLE_RSP
+ */
+#define bfi_pport_disable_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_GET_STATS_REQ
+ */
+#define bfi_pport_get_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_I2H_GET_STATS_RSP
+ */
+#define bfi_pport_get_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_CLEAR_STATS_REQ
+ */
+#define bfi_pport_clear_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_I2H_CLEAR_STATS_RSP
+ */
+#define bfi_pport_clear_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_GET_QOS_STATS_REQ
+ */
+#define bfi_pport_get_qos_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_H2I_GET_QOS_STATS_RSP
+ */
+#define bfi_pport_get_qos_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ
+ */
+#define bfi_pport_clear_qos_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_H2I_CLEAR_QOS_STATS_RSP
+ */
+#define bfi_pport_clear_qos_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_SET_SVC_PARAMS_REQ
+ */
+struct bfi_pport_set_svc_params_req_s {
+	struct bfi_mhdr_s  mh;		/*  msg header */
+	u16        tx_bbcredit;	/*  Tx credits */
+	u16        rsvd;
+};
+
+/**
+ * BFI_PPORT_I2H_SET_SVC_PARAMS_RSP
+ */
+
+/**
+ * BFI_PPORT_I2H_EVENT
+ */
+struct bfi_pport_event_s {
+	struct bfi_mhdr_s 	mh;	/*  common msg header */
+	struct bfa_pport_link_s	link_state;
+};
+
+union bfi_pport_h2i_msg_u {
+	struct bfi_mhdr_s			*mhdr;
+	struct bfi_pport_enable_req_s		*penable;
+	struct bfi_pport_generic_req_s		*pdisable;
+	struct bfi_pport_generic_req_s		*pgetstats;
+	struct bfi_pport_generic_req_s		*pclearstats;
+	struct bfi_pport_set_svc_params_req_s	*psetsvcparams;
+	struct bfi_pport_get_qos_stats_req_s	*pgetqosstats;
+	struct bfi_pport_generic_req_s		*pclearqosstats;
+};
+
+union bfi_pport_i2h_msg_u {
+	struct bfi_msg_s			*msg;
+	struct bfi_pport_generic_rsp_s		*enable_rsp;
+	struct bfi_pport_disable_rsp_s		*disable_rsp;
+	struct bfi_pport_generic_rsp_s		*getstats_rsp;
+	struct bfi_pport_clear_stats_rsp_s	*clearstats_rsp;
+	struct bfi_pport_set_svc_params_rsp_s	*setsvcparasm_rsp;
+	struct bfi_pport_get_qos_stats_rsp_s	*getqosstats_rsp;
+	struct bfi_pport_clear_qos_stats_rsp_s	*clearqosstats_rsp;
+	struct bfi_pport_event_s		*event;
+};
+
+#pragma pack()
+
+#endif /* __BFI_PPORT_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_rport.h b/drivers/scsi/bfa/include/bfi/bfi_rport.h
new file mode 100644
index 000000000000..3520f55f09d7
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_rport.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_RPORT_H__
+#define __BFI_RPORT_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_rport_h2i_msgs {
+	BFI_RPORT_H2I_CREATE_REQ = 1,
+	BFI_RPORT_H2I_DELETE_REQ = 2,
+	BFI_RPORT_H2I_SET_SPEED_REQ  = 3,
+};
+
+enum bfi_rport_i2h_msgs {
+	BFI_RPORT_I2H_CREATE_RSP = BFA_I2HM(1),
+	BFI_RPORT_I2H_DELETE_RSP = BFA_I2HM(2),
+	BFI_RPORT_I2H_QOS_SCN    = BFA_I2HM(3),
+};
+
+struct bfi_rport_create_req_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u16        bfa_handle;	/*  host rport handle		*/
+	u16        max_frmsz;	/*  max rcv pdu size		*/
+	u32        pid       : 24,	/*  remote port ID		*/
+			lp_tag    : 8;	/*  local port tag		*/
+	u32        local_pid : 24,	/*  local port ID		*/
+			cisc      : 8;
+	u8         fc_class;	/*  supported FC classes	*/
+	u8         vf_en;		/*  virtual fabric enable	*/
+	u16        vf_id;		/*  virtual fabric ID		*/
+};
+
+struct bfi_rport_create_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u8         status;		/*  rport creation status	*/
+	u8         rsvd[3];
+	u16        bfa_handle;	/*  host rport handle		*/
+	u16        fw_handle;	/*  firmware rport handle	*/
+	struct bfa_rport_qos_attr_s qos_attr;  /* QoS Attributes */
+};
+
+struct bfa_rport_speed_req_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u16        fw_handle;	/*  firmware rport handle	*/
+	u8		speed;		/*! rport's speed via RPSC  */
+	u8		rsvd;
+};
+
+struct bfi_rport_delete_req_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u16        fw_handle;	/*  firmware rport handle	*/
+	u16        rsvd;
+};
+
+struct bfi_rport_delete_rsp_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u16        bfa_handle;	/*  host rport handle		*/
+	u8         status;		/*  rport deletion status	*/
+	u8         rsvd;
+};
+
+struct bfi_rport_qos_scn_s {
+	struct bfi_mhdr_s  mh;		/*  common msg header		*/
+	u16        bfa_handle;	/*  host rport handle		*/
+	u16        rsvd;
+	struct bfa_rport_qos_attr_s old_qos_attr;  /* Old QoS Attributes */
+	struct bfa_rport_qos_attr_s new_qos_attr;  /* New QoS Attributes */
+};
+
+union bfi_rport_h2i_msg_u {
+	struct bfi_msg_s 		*msg;
+	struct bfi_rport_create_req_s	*create_req;
+	struct bfi_rport_delete_req_s	*delete_req;
+	struct bfi_rport_speed_req_s	*speed_req;
+};
+
+union bfi_rport_i2h_msg_u {
+	struct bfi_msg_s 		*msg;
+	struct bfi_rport_create_rsp_s	*create_rsp;
+	struct bfi_rport_delete_rsp_s	*delete_rsp;
+	struct bfi_rport_qos_scn_s	*qos_scn_evt;
+};
+
+#pragma pack()
+
+#endif /* __BFI_RPORT_H__ */
+
diff --git a/drivers/scsi/bfa/include/bfi/bfi_uf.h b/drivers/scsi/bfa/include/bfi/bfi_uf.h
new file mode 100644
index 000000000000..f328a9e7e622
--- /dev/null
+++ b/drivers/scsi/bfa/include/bfi/bfi_uf.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_UF_H__
+#define __BFI_UF_H__
+
+#include "bfi.h"
+
+#pragma pack(1)
+
+enum bfi_uf_h2i {
+	BFI_UF_H2I_BUF_POST = 1,
+};
+
+enum bfi_uf_i2h {
+	BFI_UF_I2H_FRM_RCVD = BFA_I2HM(1),
+};
+
+#define BFA_UF_MAX_SGES	2
+
+struct bfi_uf_buf_post_s {
+	struct bfi_mhdr_s  mh;		/*  Common msg header		*/
+	u16        buf_tag;	/*  buffer tag			*/
+	u16        buf_len;	/*  total buffer length	*/
+	struct bfi_sge_s   sge[BFA_UF_MAX_SGES]; /*  buffer DMA SGEs	*/
+};
+
+struct bfi_uf_frm_rcvd_s {
+	struct bfi_mhdr_s  mh;		/*  Common msg header		*/
+	u16        buf_tag;	/*  buffer tag			*/
+	u16        rsvd;
+	u16        frm_len;	/*  received frame length 	*/
+	u16        xfr_len;	/*  tranferred length		*/
+};
+
+#pragma pack()
+
+#endif /* __BFI_UF_H__ */
diff --git a/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h b/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
new file mode 100644
index 000000000000..43ba7064e81a
--- /dev/null
+++ b/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_cna_trcmod.h CNA trace modules
+ */
+
+#ifndef __BFA_CNA_TRCMOD_H__
+#define __BFA_CNA_TRCMOD_H__
+
+#include <cs/bfa_trc.h>
+
+/*
+ * !!! Only append to the enums defined here to avoid any versioning
+ * !!! needed between trace utility and driver version
+ */
+enum {
+	BFA_TRC_CNA_CEE		= 1,
+	BFA_TRC_CNA_PORT	= 2,
+};
+
+#endif /* __BFA_CNA_TRCMOD_H__ */
diff --git a/drivers/scsi/bfa/include/cna/cee/bfa_cee.h b/drivers/scsi/bfa/include/cna/cee/bfa_cee.h
new file mode 100644
index 000000000000..77f297f68046
--- /dev/null
+++ b/drivers/scsi/bfa/include/cna/cee/bfa_cee.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_CEE_H__
+#define __BFA_CEE_H__
+
+#include <defs/bfa_defs_cee.h>
+#include <bfa_ioc.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+
+typedef void (*bfa_cee_get_attr_cbfn_t) (void *dev, bfa_status_t status);
+typedef void (*bfa_cee_get_stats_cbfn_t) (void *dev, bfa_status_t status);
+typedef void (*bfa_cee_reset_stats_cbfn_t) (void *dev, bfa_status_t status);
+typedef void (*bfa_cee_hbfail_cbfn_t) (void *dev, bfa_status_t status);
+
+struct bfa_cee_cbfn_s {
+	bfa_cee_get_attr_cbfn_t    get_attr_cbfn;
+	void *get_attr_cbarg;
+	bfa_cee_get_stats_cbfn_t   get_stats_cbfn;
+	void *get_stats_cbarg;
+	bfa_cee_reset_stats_cbfn_t reset_stats_cbfn;
+	void *reset_stats_cbarg;
+};
+
+struct bfa_cee_s {
+	void *dev;
+	bfa_boolean_t get_attr_pending;
+	bfa_boolean_t get_stats_pending;
+	bfa_boolean_t reset_stats_pending;
+	bfa_status_t get_attr_status;
+	bfa_status_t get_stats_status;
+	bfa_status_t reset_stats_status;
+	struct bfa_cee_cbfn_s cbfn;
+	struct bfa_ioc_hbfail_notify_s hbfail;
+	struct bfa_trc_mod_s *trcmod;
+	struct bfa_log_mod_s *logmod;
+	struct bfa_cee_attr_s *attr;
+	struct bfa_cee_stats_s *stats;
+	struct bfa_dma_s attr_dma;
+	struct bfa_dma_s stats_dma;
+	struct bfa_ioc_s *ioc;
+	struct bfa_mbox_cmd_s get_cfg_mb;
+	struct bfa_mbox_cmd_s get_stats_mb;
+	struct bfa_mbox_cmd_s reset_stats_mb;
+};
+
+u32 bfa_cee_meminfo(void);
+void bfa_cee_mem_claim(struct bfa_cee_s *cee, u8 *dma_kva,
+			 u64 dma_pa);
+void bfa_cee_attach(struct bfa_cee_s *cee, struct bfa_ioc_s *ioc, void *dev,
+			struct bfa_trc_mod_s *trcmod,
+			struct bfa_log_mod_s *logmod);
+void bfa_cee_detach(struct bfa_cee_s *cee);
+bfa_status_t bfa_cee_get_attr(struct bfa_cee_s *cee,
+			 struct bfa_cee_attr_s *attr,
+			bfa_cee_get_attr_cbfn_t cbfn, void *cbarg);
+bfa_status_t bfa_cee_get_stats(struct bfa_cee_s *cee,
+			struct bfa_cee_stats_s *stats,
+			bfa_cee_get_stats_cbfn_t cbfn, void *cbarg);
+bfa_status_t bfa_cee_reset_stats(struct bfa_cee_s *cee,
+			bfa_cee_reset_stats_cbfn_t cbfn, void *cbarg);
+#endif /* __BFA_CEE_H__ */
diff --git a/drivers/scsi/bfa/include/cna/port/bfa_port.h b/drivers/scsi/bfa/include/cna/port/bfa_port.h
new file mode 100644
index 000000000000..7cbf17d3141b
--- /dev/null
+++ b/drivers/scsi/bfa/include/cna/port/bfa_port.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_PORT_H__
+#define __BFA_PORT_H__
+
+#include <defs/bfa_defs_port.h>
+#include <bfa_ioc.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+
+typedef void    (*bfa_port_stats_cbfn_t) (void *dev, bfa_status_t status);
+typedef void    (*bfa_port_endis_cbfn_t) (void *dev, bfa_status_t status);
+
+struct bfa_port_s {
+	void           *dev;
+	struct bfa_ioc_s *ioc;
+	struct bfa_trc_mod_s *trcmod;
+	struct bfa_log_mod_s *logmod;
+	u32        msgtag;
+	bfa_boolean_t   stats_busy;
+	struct bfa_mbox_cmd_s stats_mb;
+	bfa_port_stats_cbfn_t stats_cbfn;
+	void           *stats_cbarg;
+	bfa_status_t    stats_status;
+	union bfa_pport_stats_u *stats;
+	struct bfa_dma_s stats_dma;
+	bfa_boolean_t   endis_pending;
+	struct bfa_mbox_cmd_s endis_mb;
+	bfa_port_endis_cbfn_t endis_cbfn;
+	void           *endis_cbarg;
+	bfa_status_t    endis_status;
+	struct bfa_ioc_hbfail_notify_s hbfail;
+};
+
+void            bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc,
+				void *dev, struct bfa_trc_mod_s *trcmod,
+				struct bfa_log_mod_s *logmod);
+void            bfa_port_detach(struct bfa_port_s *port);
+void            bfa_port_hbfail(void *arg);
+
+bfa_status_t    bfa_port_get_stats(struct bfa_port_s *port,
+				   union bfa_pport_stats_u *stats,
+				   bfa_port_stats_cbfn_t cbfn, void *cbarg);
+bfa_status_t    bfa_port_clear_stats(struct bfa_port_s *port,
+				     bfa_port_stats_cbfn_t cbfn, void *cbarg);
+bfa_status_t    bfa_port_enable(struct bfa_port_s *port,
+				bfa_port_endis_cbfn_t cbfn, void *cbarg);
+bfa_status_t    bfa_port_disable(struct bfa_port_s *port,
+				 bfa_port_endis_cbfn_t cbfn, void *cbarg);
+u32        bfa_port_meminfo(void);
+void            bfa_port_mem_claim(struct bfa_port_s *port, u8 *dma_kva,
+				   u64 dma_pa);
+
+#endif /* __BFA_PORT_H__ */
diff --git a/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h b/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h
new file mode 100644
index 000000000000..1563ee512218
--- /dev/null
+++ b/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __ETHPORT_DEFS_H__
+#define __ETHPORT_DEFS_H__
+
+struct bnad_drv_stats {
+	u64 netif_queue_stop;
+	u64 netif_queue_wakeup;
+	u64 tso4;
+	u64 tso6;
+	u64 tso_err;
+	u64 tcpcsum_offload;
+	u64 udpcsum_offload;
+	u64 csum_help;
+	u64 csum_help_err;
+
+	u64 hw_stats_updates;
+	u64 netif_rx_schedule;
+	u64 netif_rx_complete;
+	u64 netif_rx_dropped;
+};
+#endif
diff --git a/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h b/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h
new file mode 100644
index 000000000000..eb7548030d0f
--- /dev/null
+++ b/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __PHYPORT_DEFS_H__
+#define __PHYPORT_DEFS_H__
+
+#define BNA_TXF_ID_MAX  	64
+#define BNA_RXF_ID_MAX  	64
+
+/*
+ * Statistics
+ */
+
+/*
+ * TxF Frame Statistics
+ */
+struct bna_stats_txf {
+	u64        ucast_octets;
+	u64        ucast;
+	u64        ucast_vlan;
+
+	u64        mcast_octets;
+	u64        mcast;
+	u64        mcast_vlan;
+
+	u64        bcast_octets;
+	u64        bcast;
+	u64        bcast_vlan;
+
+	u64        errors;
+	u64        filter_vlan;	/* frames filtered due to VLAN */
+	u64        filter_mac_sa;	/* frames filtered due to SA check */
+};
+
+/*
+ * RxF Frame Statistics
+ */
+struct bna_stats_rxf {
+	u64        ucast_octets;
+	u64        ucast;
+	u64        ucast_vlan;
+
+	u64        mcast_octets;
+	u64        mcast;
+	u64        mcast_vlan;
+
+	u64        bcast_octets;
+	u64        bcast;
+	u64        bcast_vlan;
+	u64        frame_drops;
+};
+
+/*
+ * FC Tx Frame Statistics
+ */
+struct bna_stats_fc_tx {
+	u64        txf_ucast_octets;
+	u64        txf_ucast;
+	u64        txf_ucast_vlan;
+
+	u64        txf_mcast_octets;
+	u64        txf_mcast;
+	u64        txf_mcast_vlan;
+
+	u64        txf_bcast_octets;
+	u64        txf_bcast;
+	u64        txf_bcast_vlan;
+
+	u64        txf_parity_errors;
+	u64        txf_timeout;
+	u64        txf_fid_parity_errors;
+};
+
+/*
+ * FC Rx Frame Statistics
+ */
+struct bna_stats_fc_rx {
+	u64        rxf_ucast_octets;
+	u64        rxf_ucast;
+	u64        rxf_ucast_vlan;
+
+	u64        rxf_mcast_octets;
+	u64        rxf_mcast;
+	u64        rxf_mcast_vlan;
+
+	u64        rxf_bcast_octets;
+	u64        rxf_bcast;
+	u64        rxf_bcast_vlan;
+};
+
+/*
+ * RAD Frame Statistics
+ */
+struct cna_stats_rad {
+	u64        rx_frames;
+	u64        rx_octets;
+	u64        rx_vlan_frames;
+
+	u64        rx_ucast;
+	u64        rx_ucast_octets;
+	u64        rx_ucast_vlan;
+
+	u64        rx_mcast;
+	u64        rx_mcast_octets;
+	u64        rx_mcast_vlan;
+
+	u64        rx_bcast;
+	u64        rx_bcast_octets;
+	u64        rx_bcast_vlan;
+
+	u64        rx_drops;
+};
+
+/*
+ * BPC Tx Registers
+ */
+struct cna_stats_bpc_tx {
+	u64        tx_pause[8];
+	u64        tx_zero_pause[8];	/*  Pause cancellation */
+	u64        tx_first_pause[8];	/*  Pause initiation rather
+						 *than retention */
+};
+
+/*
+ * BPC Rx Registers
+ */
+struct cna_stats_bpc_rx {
+	u64        rx_pause[8];
+	u64        rx_zero_pause[8];	/*  Pause cancellation */
+	u64        rx_first_pause[8];	/*  Pause initiation rather
+						 *than retention */
+};
+
+/*
+ * MAC Rx Statistics
+ */
+struct cna_stats_mac_rx {
+	u64        frame_64;	/* both rx and tx counter */
+	u64        frame_65_127;	/* both rx and tx counter */
+	u64        frame_128_255;	/* both rx and tx counter */
+	u64        frame_256_511;	/* both rx and tx counter */
+	u64        frame_512_1023;	/* both rx and tx counter */
+	u64        frame_1024_1518;	/* both rx and tx counter */
+	u64        frame_1518_1522;	/* both rx and tx counter */
+	u64        rx_bytes;
+	u64        rx_packets;
+	u64        rx_fcs_error;
+	u64        rx_multicast;
+	u64        rx_broadcast;
+	u64        rx_control_frames;
+	u64        rx_pause;
+	u64        rx_unknown_opcode;
+	u64        rx_alignment_error;
+	u64        rx_frame_length_error;
+	u64        rx_code_error;
+	u64        rx_carrier_sense_error;
+	u64        rx_undersize;
+	u64        rx_oversize;
+	u64        rx_fragments;
+	u64        rx_jabber;
+	u64        rx_drop;
+};
+
+/*
+ * MAC Tx Statistics
+ */
+struct cna_stats_mac_tx {
+	u64        tx_bytes;
+	u64        tx_packets;
+	u64        tx_multicast;
+	u64        tx_broadcast;
+	u64        tx_pause;
+	u64        tx_deferral;
+	u64        tx_excessive_deferral;
+	u64        tx_single_collision;
+	u64        tx_muliple_collision;
+	u64        tx_late_collision;
+	u64        tx_excessive_collision;
+	u64        tx_total_collision;
+	u64        tx_pause_honored;
+	u64        tx_drop;
+	u64        tx_jabber;
+	u64        tx_fcs_error;
+	u64        tx_control_frame;
+	u64        tx_oversize;
+	u64        tx_undersize;
+	u64        tx_fragments;
+};
+
+/*
+ * Complete statistics
+ */
+struct bna_stats {
+	struct cna_stats_mac_rx mac_rx_stats;
+	struct cna_stats_bpc_rx bpc_rx_stats;
+	struct cna_stats_rad rad_stats;
+	struct bna_stats_fc_rx fc_rx_stats;
+	struct cna_stats_mac_tx mac_tx_stats;
+	struct cna_stats_bpc_tx bpc_tx_stats;
+	struct bna_stats_fc_tx fc_tx_stats;
+	struct bna_stats_rxf rxf_stats[BNA_TXF_ID_MAX];
+	struct bna_stats_txf txf_stats[BNA_RXF_ID_MAX];
+};
+
+#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_checksum.h b/drivers/scsi/bfa/include/cs/bfa_checksum.h
new file mode 100644
index 000000000000..af8c1d533ba8
--- /dev/null
+++ b/drivers/scsi/bfa/include/cs/bfa_checksum.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_checksum.h BFA checksum utilities
+ */
+
+#ifndef __BFA_CHECKSUM_H__
+#define __BFA_CHECKSUM_H__
+
+static inline u32
+bfa_checksum_u32(u32 *buf, int sz)
+{
+	int		i, m = sz >> 2;
+	u32	sum = 0;
+
+	for (i = 0; i < m; i++)
+		sum ^= buf[i];
+
+	return (sum);
+}
+
+static inline u16
+bfa_checksum_u16(u16 *buf, int sz)
+{
+	int             i, m = sz >> 1;
+	u16        sum = 0;
+
+	for (i = 0; i < m; i++)
+		sum ^= buf[i];
+
+	return (sum);
+}
+
+static inline u8
+bfa_checksum_u8(u8 *buf, int sz)
+{
+	int             i;
+	u8         sum = 0;
+
+	for (i = 0; i < sz; i++)
+		sum ^= buf[i];
+
+	return (sum);
+}
+#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_debug.h b/drivers/scsi/bfa/include/cs/bfa_debug.h
new file mode 100644
index 000000000000..441be86b1b0f
--- /dev/null
+++ b/drivers/scsi/bfa/include/cs/bfa_debug.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_debug.h BFA debug interfaces
+ */
+
+#ifndef __BFA_DEBUG_H__
+#define __BFA_DEBUG_H__
+
+#define bfa_assert(__cond)	do {					\
+	if (!(__cond)) 							\
+		bfa_panic(__LINE__, __FILE__, #__cond);      \
+} while (0)
+
+#define bfa_sm_fault(__mod, __event)	do {				\
+	bfa_sm_panic((__mod)->logm, __LINE__, __FILE__, __event);      \
+} while (0)
+
+#ifndef BFA_PERF_BUILD
+#define bfa_assert_fp(__cond)	bfa_assert(__cond)
+#else
+#define bfa_assert_fp(__cond)
+#endif
+
+struct bfa_log_mod_s;
+void bfa_panic(int line, char *file, char *panicstr);
+void bfa_sm_panic(struct bfa_log_mod_s *logm, int line, char *file, int event);
+
+#endif /* __BFA_DEBUG_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_log.h b/drivers/scsi/bfa/include/cs/bfa_log.h
new file mode 100644
index 000000000000..761cbe22130a
--- /dev/null
+++ b/drivers/scsi/bfa/include/cs/bfa_log.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_log.h BFA log library data structure and function definition
+ */
+
+#ifndef __BFA_LOG_H__
+#define __BFA_LOG_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_aen.h>
+
+/*
+ * BFA log module definition
+ *
+ * To create a new module id:
+ * Add a #define at the end of the list below. Select a value for your
+ * definition so that it is one (1) greater than the previous
+ * definition. Modify the definition of BFA_LOG_MODULE_ID_MAX to become
+ * your new definition.
+ * Should have no gaps in between the values because this is used in arrays.
+ * IMPORTANT: AEN_IDs must be at the begining, otherwise update bfa_defs_aen.h
+ */
+
+enum bfa_log_module_id {
+	BFA_LOG_UNUSED_ID	= 0,
+
+	/* AEN defs begin */
+	BFA_LOG_AEN_MIN		= BFA_LOG_UNUSED_ID,
+
+	BFA_LOG_AEN_ID_ADAPTER 	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_ADAPTER,/* 1 */
+	BFA_LOG_AEN_ID_PORT 	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_PORT,	/* 2 */
+	BFA_LOG_AEN_ID_LPORT 	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_LPORT,	/* 3 */
+	BFA_LOG_AEN_ID_RPORT 	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_RPORT,	/* 4 */
+	BFA_LOG_AEN_ID_ITNIM 	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_ITNIM,	/* 5 */
+	BFA_LOG_AEN_ID_TIN 	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_TIN,	/* 6 */
+	BFA_LOG_AEN_ID_IPFC 	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_IPFC,	/* 7 */
+	BFA_LOG_AEN_ID_AUDIT 	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_AUDIT,	/* 8 */
+	BFA_LOG_AEN_ID_IOC	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_IOC,	/* 9 */
+	BFA_LOG_AEN_ID_ETHPORT	= BFA_LOG_AEN_MIN + BFA_AEN_CAT_ETHPORT,/* 10 */
+
+	BFA_LOG_AEN_MAX		= BFA_LOG_AEN_ID_ETHPORT,
+	/* AEN defs end */
+
+	BFA_LOG_MODULE_ID_MIN	= BFA_LOG_AEN_MAX,
+
+	BFA_LOG_FW_ID		= BFA_LOG_MODULE_ID_MIN + 1,
+	BFA_LOG_HAL_ID		= BFA_LOG_MODULE_ID_MIN + 2,
+	BFA_LOG_FCS_ID		= BFA_LOG_MODULE_ID_MIN + 3,
+	BFA_LOG_WDRV_ID		= BFA_LOG_MODULE_ID_MIN + 4,
+	BFA_LOG_LINUX_ID	= BFA_LOG_MODULE_ID_MIN + 5,
+	BFA_LOG_SOLARIS_ID	= BFA_LOG_MODULE_ID_MIN + 6,
+
+	BFA_LOG_MODULE_ID_MAX 	= BFA_LOG_SOLARIS_ID,
+
+	/* Not part of any arrays */
+	BFA_LOG_MODULE_ID_ALL 	= BFA_LOG_MODULE_ID_MAX + 1,
+	BFA_LOG_AEN_ALL 	= BFA_LOG_MODULE_ID_MAX + 2,
+	BFA_LOG_DRV_ALL		= BFA_LOG_MODULE_ID_MAX + 3,
+};
+
+/*
+ * BFA log catalog name
+ */
+#define BFA_LOG_CAT_NAME	"BFA"
+
+/*
+ * bfa log severity values
+ */
+enum bfa_log_severity {
+	BFA_LOG_INVALID = 0,
+	BFA_LOG_CRITICAL = 1,
+	BFA_LOG_ERROR = 2,
+	BFA_LOG_WARNING = 3,
+	BFA_LOG_INFO = 4,
+	BFA_LOG_NONE = 5,
+	BFA_LOG_LEVEL_MAX = BFA_LOG_NONE
+};
+
+#define BFA_LOG_MODID_OFFSET		16
+
+
+struct bfa_log_msgdef_s {
+	u32	msg_id;		/*  message id */
+	int		attributes;	/*  attributes */
+	int		severity;	/*  severity level */
+	char		*msg_value;
+					/*  msg string */
+	char		*message;
+					/*  msg format string */
+	int		arg_type;	/*  argument type */
+	int		arg_num;	/*  number of argument */
+};
+
+/*
+ * supported argument type
+ */
+enum bfa_log_arg_type {
+	BFA_LOG_S = 0,		/*  string */
+	BFA_LOG_D,		/*  decimal */
+	BFA_LOG_I,		/*  integer */
+	BFA_LOG_O,		/*  oct number */
+	BFA_LOG_U,		/*  unsigned integer */
+	BFA_LOG_X,		/*  hex number */
+	BFA_LOG_F,		/*  floating */
+	BFA_LOG_C,		/*  character */
+	BFA_LOG_L,		/*  double */
+	BFA_LOG_P		/*  pointer */
+};
+
+#define BFA_LOG_ARG_TYPE	2
+#define BFA_LOG_ARG0		(0 * BFA_LOG_ARG_TYPE)
+#define BFA_LOG_ARG1		(1 * BFA_LOG_ARG_TYPE)
+#define BFA_LOG_ARG2		(2 * BFA_LOG_ARG_TYPE)
+#define BFA_LOG_ARG3		(3 * BFA_LOG_ARG_TYPE)
+
+#define BFA_LOG_GET_MOD_ID(msgid) ((msgid >> BFA_LOG_MODID_OFFSET) & 0xff)
+#define BFA_LOG_GET_MSG_IDX(msgid) (msgid & 0xffff)
+#define BFA_LOG_GET_MSG_ID(msgdef) ((msgdef)->msg_id)
+#define BFA_LOG_GET_MSG_FMT_STRING(msgdef) ((msgdef)->message)
+#define BFA_LOG_GET_SEVERITY(msgdef) ((msgdef)->severity)
+
+/*
+ * Event attributes
+ */
+#define BFA_LOG_ATTR_NONE	0
+#define BFA_LOG_ATTR_AUDIT	1
+#define BFA_LOG_ATTR_LOG	2
+#define BFA_LOG_ATTR_FFDC	4
+
+#define BFA_LOG_CREATE_ID(msw, lsw) \
+	(((u32)msw << BFA_LOG_MODID_OFFSET) | lsw)
+
+struct bfa_log_mod_s;
+
+/**
+ * callback function
+ */
+typedef void (*bfa_log_cb_t)(struct bfa_log_mod_s *log_mod, u32 msg_id,
+			const char *format, ...);
+
+
+struct bfa_log_mod_s {
+	char		instance_info[16];	/*  instance info */
+	int		log_level[BFA_LOG_MODULE_ID_MAX + 1];
+						/*  log level for modules */
+	bfa_log_cb_t	cbfn; 			/*  callback function */
+};
+
+extern int bfa_log_init(struct bfa_log_mod_s *log_mod,
+			char *instance_name, bfa_log_cb_t cbfn);
+extern int bfa_log(struct bfa_log_mod_s *log_mod, u32 msg_id, ...);
+extern bfa_status_t bfa_log_set_level(struct bfa_log_mod_s *log_mod,
+			int mod_id, enum bfa_log_severity log_level);
+extern bfa_status_t bfa_log_set_level_all(struct bfa_log_mod_s *log_mod,
+			enum bfa_log_severity log_level);
+extern bfa_status_t bfa_log_set_level_aen(struct bfa_log_mod_s *log_mod,
+			enum bfa_log_severity log_level);
+extern enum bfa_log_severity bfa_log_get_level(struct bfa_log_mod_s *log_mod,
+			int mod_id);
+extern enum bfa_log_severity bfa_log_get_msg_level(
+			struct bfa_log_mod_s *log_mod, u32 msg_id);
+/*
+ * array of messages generated from xml files
+ */
+extern struct bfa_log_msgdef_s bfa_log_msg_array[];
+
+#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_perf.h b/drivers/scsi/bfa/include/cs/bfa_perf.h
new file mode 100644
index 000000000000..45aa5f978ff5
--- /dev/null
+++ b/drivers/scsi/bfa/include/cs/bfa_perf.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFAD_PERF_H__
+#define __BFAD_PERF_H__
+
+#ifdef BFAD_PERF_BUILD
+
+#undef bfa_trc
+#undef bfa_trc32
+#undef bfa_assert
+#undef BFA_TRC_FILE
+
+#define bfa_trc(_trcp, _data)
+#define bfa_trc32(_trcp, _data)
+#define bfa_assert(__cond)
+#define BFA_TRC_FILE(__mod, __submod)
+
+#endif
+
+#endif /* __BFAD_PERF_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_plog.h b/drivers/scsi/bfa/include/cs/bfa_plog.h
new file mode 100644
index 000000000000..670f86e5fc6e
--- /dev/null
+++ b/drivers/scsi/bfa/include/cs/bfa_plog.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_PORTLOG_H__
+#define __BFA_PORTLOG_H__
+
+#include "protocol/fc.h"
+#include <defs/bfa_defs_types.h>
+
+#define BFA_PL_NLOG_ENTS 256
+#define BFA_PL_LOG_REC_INCR(_x) ((_x)++, (_x) %= BFA_PL_NLOG_ENTS)
+
+#define BFA_PL_STRING_LOG_SZ   32   /* number of chars in string log */
+#define BFA_PL_INT_LOG_SZ      8    /* number of integers in the integer log */
+
+enum bfa_plog_log_type {
+	BFA_PL_LOG_TYPE_INVALID = 0,
+	BFA_PL_LOG_TYPE_INT 	= 1,
+	BFA_PL_LOG_TYPE_STRING 	= 2,
+};
+
+/*
+ * the (fixed size) record format for each entry in the portlog
+ */
+struct bfa_plog_rec_s {
+	u32        tv;	/* Filled by the portlog driver when the *
+				 * entry is added to the circular log.   */
+	u8         port;	/* Source port that logged this entry. CM
+				 * entities will use 0xFF */
+	u8         mid;	/* Integer value to be used by all entities *
+				 * while logging. The module id to string   *
+				 * conversion will be done by BFAL. See
+				 * enum bfa_plog_mid */
+	u8         eid;	/* indicates Rx, Tx, IOCTL, etc. See
+				 * enum bfa_plog_eid */
+	u8         log_type; /* indicates string log or integer log.
+				   * see bfa_plog_log_type_t */
+	u8         log_num_ints;
+	/*
+	 * interpreted only if log_type is INT_LOG. indicates number of
+	 * integers in the int_log[] (0-PL_INT_LOG_SZ).
+	 */
+	u8         rsvd;
+	u16        misc;	/* can be used to indicate fc frame length,
+				 *etc.. */
+	union {
+		char            string_log[BFA_PL_STRING_LOG_SZ];
+		u32        int_log[BFA_PL_INT_LOG_SZ];
+	} log_entry;
+
+};
+
+/*
+ * the following #defines will be used by the logging entities to indicate
+ * their module id. BFAL will convert the integer value to string format
+ *
+* process to be used while changing the following #defines:
+ *  - Always add new entries at the end
+ *  - define corresponding string in BFAL
+ *  - Do not remove any entry or rearrange the order.
+ */
+enum bfa_plog_mid {
+	BFA_PL_MID_INVALID 	= 0,
+	BFA_PL_MID_DEBUG 	= 1,
+	BFA_PL_MID_DRVR 	= 2,
+	BFA_PL_MID_HAL 		= 3,
+	BFA_PL_MID_HAL_FCXP 	= 4,
+	BFA_PL_MID_HAL_UF 	= 5,
+	BFA_PL_MID_FCS 		= 6,
+	BFA_PL_MID_MAX 		= 7
+};
+
+#define BFA_PL_MID_STRLEN    8
+struct bfa_plog_mid_strings_s {
+	char            m_str[BFA_PL_MID_STRLEN];
+};
+
+/*
+ * the following #defines will be used by the logging entities to indicate
+ * their event type. BFAL will convert the integer value to string format
+ *
+* process to be used while changing the following #defines:
+ *  - Always add new entries at the end
+ *  - define corresponding string in BFAL
+ *  - Do not remove any entry or rearrange the order.
+ */
+enum bfa_plog_eid {
+	BFA_PL_EID_INVALID 		= 0,
+	BFA_PL_EID_IOC_DISABLE 		= 1,
+	BFA_PL_EID_IOC_ENABLE 		= 2,
+	BFA_PL_EID_PORT_DISABLE 	= 3,
+	BFA_PL_EID_PORT_ENABLE 		= 4,
+	BFA_PL_EID_PORT_ST_CHANGE 	= 5,
+	BFA_PL_EID_TX 			= 6,
+	BFA_PL_EID_TX_ACK1 		= 7,
+	BFA_PL_EID_TX_RJT 		= 8,
+	BFA_PL_EID_TX_BSY 		= 9,
+	BFA_PL_EID_RX 			= 10,
+	BFA_PL_EID_RX_ACK1 		= 11,
+	BFA_PL_EID_RX_RJT 		= 12,
+	BFA_PL_EID_RX_BSY 		= 13,
+	BFA_PL_EID_CT_IN 		= 14,
+	BFA_PL_EID_CT_OUT 		= 15,
+	BFA_PL_EID_DRIVER_START 	= 16,
+	BFA_PL_EID_RSCN 		= 17,
+	BFA_PL_EID_DEBUG 		= 18,
+	BFA_PL_EID_MISC 		= 19,
+	BFA_PL_EID_MAX 			= 20
+};
+
+#define BFA_PL_ENAME_STRLEN    	8
+struct bfa_plog_eid_strings_s {
+	char            e_str[BFA_PL_ENAME_STRLEN];
+};
+
+#define BFA_PL_SIG_LEN	8
+#define BFA_PL_SIG_STR  "12pl123"
+
+/*
+ * per port circular log buffer
+ */
+struct bfa_plog_s {
+	char            plog_sig[BFA_PL_SIG_LEN];	/* Start signature */
+	u8         plog_enabled;
+	u8         rsvd[7];
+	u32        ticks;
+	u16        head;
+	u16        tail;
+	struct bfa_plog_rec_s  plog_recs[BFA_PL_NLOG_ENTS];
+};
+
+void bfa_plog_init(struct bfa_plog_s *plog);
+void bfa_plog_str(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+			enum bfa_plog_eid event, u16 misc, char *log_str);
+void bfa_plog_intarr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+			enum bfa_plog_eid event, u16 misc,
+			u32 *intarr, u32 num_ints);
+void bfa_plog_fchdr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+			enum bfa_plog_eid event, u16 misc,
+			struct fchs_s *fchdr);
+void bfa_plog_fchdr_and_pl(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+			enum bfa_plog_eid event, u16 misc,
+			struct fchs_s *fchdr, u32 pld_w0);
+void bfa_plog_clear(struct bfa_plog_s *plog);
+void bfa_plog_enable(struct bfa_plog_s *plog);
+void bfa_plog_disable(struct bfa_plog_s *plog);
+bfa_boolean_t	bfa_plog_get_setting(struct bfa_plog_s *plog);
+
+#endif /* __BFA_PORTLOG_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_q.h b/drivers/scsi/bfa/include/cs/bfa_q.h
new file mode 100644
index 000000000000..ea895facedbc
--- /dev/null
+++ b/drivers/scsi/bfa/include/cs/bfa_q.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_q.h Circular queue definitions.
+ */
+
+#ifndef __BFA_Q_H__
+#define __BFA_Q_H__
+
+#define bfa_q_first(_q) ((void *)(((struct list_head *) (_q))->next))
+#define bfa_q_next(_qe)	(((struct list_head *) (_qe))->next)
+#define bfa_q_prev(_qe) (((struct list_head *) (_qe))->prev)
+
+/*
+ * bfa_q_qe_init - to initialize a queue element
+ */
+#define bfa_q_qe_init(_qe) {						\
+	bfa_q_next(_qe) = (struct list_head *) NULL;			\
+	bfa_q_prev(_qe) = (struct list_head *) NULL;			\
+}
+
+/*
+ * bfa_q_deq - dequeue an element from head of the queue
+ */
+#define bfa_q_deq(_q, _qe) {						\
+	if (!list_empty(_q)) {					\
+		(*((struct list_head **) (_qe))) = bfa_q_next(_q);	\
+		bfa_q_prev(bfa_q_next(*((struct list_head **) _qe))) =	\
+						(struct list_head *) (_q); \
+		bfa_q_next(_q) = bfa_q_next(*((struct list_head **) _qe)); \
+		BFA_Q_DBG_INIT(*((struct list_head **) _qe));		\
+	} else {							\
+		*((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+	}								\
+}
+
+/*
+ * bfa_q_deq_tail - dequeue an element from tail of the queue
+ */
+#define bfa_q_deq_tail(_q, _qe) {					    \
+	if (!list_empty(_q)) {					            \
+		*((struct list_head **) (_qe)) = bfa_q_prev(_q);	    \
+		bfa_q_next(bfa_q_prev(*((struct list_head **) _qe))) = 	    \
+						(struct list_head *) (_q);  \
+		bfa_q_prev(_q) = bfa_q_prev(*(struct list_head **) _qe);    \
+		BFA_Q_DBG_INIT(*((struct list_head **) _qe));		    \
+	} else {							    \
+		*((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+	}								    \
+}
+
+/*
+ * #ifdef BFA_DEBUG (Using bfa_assert to check for debug_build is not
+ * consistent across modules)
+ */
+#ifndef BFA_PERF_BUILD
+#define BFA_Q_DBG_INIT(_qe)	bfa_q_qe_init(_qe)
+#else
+#define BFA_Q_DBG_INIT(_qe)
+#endif
+
+#define bfa_q_is_on_q(_q, _qe)		\
+	bfa_q_is_on_q_func(_q, (struct list_head *)(_qe))
+extern int bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe);
+
+#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_sm.h b/drivers/scsi/bfa/include/cs/bfa_sm.h
new file mode 100644
index 000000000000..9877066680a6
--- /dev/null
+++ b/drivers/scsi/bfa/include/cs/bfa_sm.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfasm.h State machine defines
+ */
+
+#ifndef __BFA_SM_H__
+#define __BFA_SM_H__
+
+typedef void (*bfa_sm_t)(void *sm, int event);
+
+#define bfa_sm_set_state(_sm, _state)	(_sm)->sm = (bfa_sm_t)(_state)
+#define bfa_sm_send_event(_sm, _event)	(_sm)->sm((_sm), (_event))
+#define bfa_sm_get_state(_sm)		((_sm)->sm)
+#define bfa_sm_cmp_state(_sm, _state)	((_sm)->sm == (bfa_sm_t)(_state))
+
+/**
+ * For converting from state machine function to state encoding.
+ */
+struct bfa_sm_table_s {
+	bfa_sm_t	sm;	/*  state machine function	*/
+	int		state;	/*  state machine encoding	*/
+	char		*name;	/*  state name for display	*/
+};
+#define BFA_SM(_sm)	((bfa_sm_t)(_sm))
+
+int bfa_sm_to_state(struct bfa_sm_table_s *smt, bfa_sm_t sm);
+
+/**
+ * State machine with entry actions.
+ */
+typedef void (*bfa_fsm_t)(void *fsm, int event);
+
+/**
+ * oc - object class eg. bfa_ioc
+ * st - state, eg. reset
+ * otype - object type, eg. struct bfa_ioc_s
+ * etype - object type, eg. enum ioc_event
+ */
+#define bfa_fsm_state_decl(oc, st, otype, etype)		\
+	static void oc ## _sm_ ## st(otype * fsm, etype event);      \
+	static void oc ## _sm_ ## st ## _entry(otype * fsm)
+
+#define bfa_fsm_set_state(_fsm, _state) do {	\
+	(_fsm)->fsm = (bfa_fsm_t)(_state);      \
+	_state ## _entry(_fsm);      \
+} while (0)
+
+#define bfa_fsm_send_event(_fsm, _event)	\
+	(_fsm)->fsm((_fsm), (_event))
+#define bfa_fsm_cmp_state(_fsm, _state)		\
+	((_fsm)->fsm == (bfa_fsm_t)(_state))
+
+#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_trc.h b/drivers/scsi/bfa/include/cs/bfa_trc.h
new file mode 100644
index 000000000000..3e743928c74c
--- /dev/null
+++ b/drivers/scsi/bfa/include/cs/bfa_trc.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_TRC_H__
+#define __BFA_TRC_H__
+
+#include <bfa_os_inc.h>
+
+#ifndef BFA_TRC_MAX
+#define BFA_TRC_MAX	(4 * 1024)
+#endif
+
+#ifndef BFA_TRC_TS
+#define BFA_TRC_TS(_trcm)	((_trcm)->ticks ++)
+#endif
+
+struct bfa_trc_s {
+#ifdef __BIGENDIAN
+	u16	fileno;
+	u16	line;
+#else
+	u16	line;
+	u16	fileno;
+#endif
+	u32	timestamp;
+	union {
+		struct {
+			u32	rsvd;
+			u32	u32;
+		} u32;
+		u64	u64;
+	} data;
+};
+
+
+struct bfa_trc_mod_s {
+	u32	head;
+	u32	tail;
+	u32	ntrc;
+	u32	stopped;
+	u32	ticks;
+	u32	rsvd[3];
+	struct bfa_trc_s trc[BFA_TRC_MAX];
+};
+
+
+enum {
+	BFA_TRC_FW   = 1,	/*  firmware modules */
+	BFA_TRC_HAL  = 2,	/*  BFA modules */
+	BFA_TRC_FCS  = 3,	/*  BFA FCS modules */
+	BFA_TRC_LDRV = 4,	/*  Linux driver modules */
+	BFA_TRC_SDRV = 5,	/*  Solaris driver modules */
+	BFA_TRC_VDRV = 6,	/*  vmware driver modules */
+	BFA_TRC_WDRV = 7,	/*  windows driver modules */
+	BFA_TRC_AEN  = 8,	/*  AEN module */
+	BFA_TRC_BIOS = 9,	/*  bios driver modules */
+	BFA_TRC_EFI  = 10,	/*  EFI driver modules */
+	BNA_TRC_WDRV = 11,	/*  BNA windows driver modules */
+	BNA_TRC_VDRV = 12,	/*  BNA vmware driver modules */
+	BNA_TRC_SDRV = 13,	/*  BNA Solaris driver modules */
+	BNA_TRC_LDRV = 14,	/*  BNA Linux driver modules */
+	BNA_TRC_HAL  = 15,	/*  BNA modules */
+	BFA_TRC_CNA  = 16,	/*  Common modules */
+	BNA_TRC_IMDRV = 17	/*  BNA windows intermediate driver modules */
+};
+#define BFA_TRC_MOD_SH	10
+#define BFA_TRC_MOD(__mod)	((BFA_TRC_ ## __mod) << BFA_TRC_MOD_SH)
+
+/**
+ * Define a new tracing file (module). Module should match one defined above.
+ */
+#define BFA_TRC_FILE(__mod, __submod)					\
+	static int __trc_fileno = ((BFA_TRC_ ## __mod ## _ ## __submod) | \
+						 BFA_TRC_MOD(__mod))
+
+
+#define bfa_trc32(_trcp, _data)	\
+	__bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
+
+
+#ifndef BFA_BOOT_BUILD
+#define bfa_trc(_trcp, _data)	\
+	__bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u64)_data)
+#else
+void bfa_boot_trc(struct bfa_trc_mod_s *trcmod, u16 fileno,
+			u16 line, u32 data);
+#define bfa_trc(_trcp, _data)	\
+	bfa_boot_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
+#endif
+
+
+static inline void
+bfa_trc_init(struct bfa_trc_mod_s *trcm)
+{
+	trcm->head = trcm->tail = trcm->stopped = 0;
+	trcm->ntrc = BFA_TRC_MAX;
+}
+
+
+static inline void
+bfa_trc_stop(struct bfa_trc_mod_s *trcm)
+{
+	trcm->stopped = 1;
+}
+
+#ifdef FWTRC
+extern void dc_flush(void *data);
+#else
+#define dc_flush(data)
+#endif
+
+
+static inline void
+__bfa_trc(struct bfa_trc_mod_s *trcm, int fileno, int line, u64 data)
+{
+	int		tail = trcm->tail;
+	struct bfa_trc_s 	*trc = &trcm->trc[tail];
+
+	if (trcm->stopped)
+		return;
+
+	trc->fileno = (u16) fileno;
+	trc->line = (u16) line;
+	trc->data.u64 = data;
+	trc->timestamp = BFA_TRC_TS(trcm);
+	dc_flush(trc);
+
+	trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
+	if (trcm->tail == trcm->head)
+		trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
+	dc_flush(trcm);
+}
+
+
+static inline void
+__bfa_trc32(struct bfa_trc_mod_s *trcm, int fileno, int line, u32 data)
+{
+	int		tail = trcm->tail;
+	struct bfa_trc_s *trc = &trcm->trc[tail];
+
+	if (trcm->stopped)
+		return;
+
+	trc->fileno = (u16) fileno;
+	trc->line = (u16) line;
+	trc->data.u32.u32 = data;
+	trc->timestamp = BFA_TRC_TS(trcm);
+	dc_flush(trc);
+
+	trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
+	if (trcm->tail == trcm->head)
+		trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
+	dc_flush(trcm);
+}
+
+#ifndef BFA_PERF_BUILD
+#define bfa_trc_fp(_trcp, _data)	bfa_trc(_trcp, _data)
+#else
+#define bfa_trc_fp(_trcp, _data)
+#endif
+
+#endif /* __BFA_TRC_H__ */
+
diff --git a/drivers/scsi/bfa/include/cs/bfa_wc.h b/drivers/scsi/bfa/include/cs/bfa_wc.h
new file mode 100644
index 000000000000..0460bd4fc7c4
--- /dev/null
+++ b/drivers/scsi/bfa/include/cs/bfa_wc.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_wc.h Generic wait counter.
+ */
+
+#ifndef __BFA_WC_H__
+#define __BFA_WC_H__
+
+typedef void (*bfa_wc_resume_t) (void *cbarg);
+
+struct bfa_wc_s {
+	bfa_wc_resume_t wc_resume;
+	void		*wc_cbarg;
+	int		wc_count;
+};
+
+static inline void
+bfa_wc_up(struct bfa_wc_s *wc)
+{
+	wc->wc_count++;
+}
+
+static inline void
+bfa_wc_down(struct bfa_wc_s *wc)
+{
+	wc->wc_count--;
+	if (wc->wc_count == 0)
+		wc->wc_resume(wc->wc_cbarg);
+}
+
+/**
+ * Initialize a waiting counter.
+ */
+static inline void
+bfa_wc_init(struct bfa_wc_s *wc, bfa_wc_resume_t wc_resume, void *wc_cbarg)
+{
+	wc->wc_resume = wc_resume;
+	wc->wc_cbarg = wc_cbarg;
+	wc->wc_count = 0;
+	bfa_wc_up(wc);
+}
+
+/**
+ * Wait for counter to reach zero
+ */
+static inline void
+bfa_wc_wait(struct bfa_wc_s *wc)
+{
+	bfa_wc_down(wc);
+}
+
+#endif
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h b/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h
new file mode 100644
index 000000000000..8c208fc8e329
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_ADAPTER_H__
+#define __BFA_DEFS_ADAPTER_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_mfg.h>
+
+/**
+ * BFA adapter level attributes.
+ */
+enum {
+	BFA_ADAPTER_SERIAL_NUM_LEN = STRSZ(BFA_MFG_SERIALNUM_SIZE),
+					/*
+					 *!< adapter serial num length
+					 */
+	BFA_ADAPTER_MODEL_NAME_LEN  = 16,  /*  model name length */
+	BFA_ADAPTER_MODEL_DESCR_LEN = 128, /*  model description length */
+	BFA_ADAPTER_MFG_NAME_LEN    = 8,   /*  manufacturer name length */
+	BFA_ADAPTER_SYM_NAME_LEN    = 64,  /*  adapter symbolic name length */
+	BFA_ADAPTER_OS_TYPE_LEN	    = 64,  /*  adapter os type length */
+};
+
+struct bfa_adapter_attr_s {
+	char            manufacturer[BFA_ADAPTER_MFG_NAME_LEN];
+	char            serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+	u32	rsvd1;
+	char            model[BFA_ADAPTER_MODEL_NAME_LEN];
+	char            model_descr[BFA_ADAPTER_MODEL_DESCR_LEN];
+	wwn_t           pwwn;
+	char            node_symname[FC_SYMNAME_MAX];
+	char            hw_ver[BFA_VERSION_LEN];
+	char            fw_ver[BFA_VERSION_LEN];
+	char            optrom_ver[BFA_VERSION_LEN];
+	char            os_type[BFA_ADAPTER_OS_TYPE_LEN];
+	struct bfa_mfg_vpd_s	vpd;
+	struct mac_s	mac;
+
+	u8		nports;
+	u8		max_speed;
+	u8		prototype;
+	char	        asic_rev;
+
+	u8         pcie_gen;
+	u8         pcie_lanes_orig;
+	u8         pcie_lanes;
+	u8	        cna_capable;
+};
+
+/**
+ * BFA adapter level events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ADD:        [in]: None     [out]: serial_num, pwwn, nports
+ * BFA_PORT_AEN_REMOVE:     [in]: pwwn     [out]: serial_num, pwwn, nports
+ */
+enum bfa_adapter_aen_event {
+	BFA_ADAPTER_AEN_ADD 	= 1,	/*  New Adapter found event */
+	BFA_ADAPTER_AEN_REMOVE 	= 2,	/*  Adapter removed event */
+};
+
+struct bfa_adapter_aen_data_s {
+	char            serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+	u32        nports;	/*  Number of NPorts */
+	wwn_t           pwwn;	/*  WWN of one of its physical port */
+};
+
+#endif /* __BFA_DEFS_ADAPTER_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_aen.h b/drivers/scsi/bfa/include/defs/bfa_defs_aen.h
new file mode 100644
index 000000000000..4c81a613db3d
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_aen.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_AEN_H__
+#define __BFA_DEFS_AEN_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_lport.h>
+#include <defs/bfa_defs_rport.h>
+#include <defs/bfa_defs_itnim.h>
+#include <defs/bfa_defs_tin.h>
+#include <defs/bfa_defs_ipfc.h>
+#include <defs/bfa_defs_audit.h>
+#include <defs/bfa_defs_ethport.h>
+
+enum bfa_aen_category {
+	BFA_AEN_CAT_ADAPTER 	= 1,
+	BFA_AEN_CAT_PORT 	= 2,
+	BFA_AEN_CAT_LPORT 	= 3,
+	BFA_AEN_CAT_RPORT 	= 4,
+	BFA_AEN_CAT_ITNIM 	= 5,
+	BFA_AEN_CAT_TIN 	= 6,
+	BFA_AEN_CAT_IPFC 	= 7,
+	BFA_AEN_CAT_AUDIT 	= 8,
+	BFA_AEN_CAT_IOC 	= 9,
+	BFA_AEN_CAT_ETHPORT	= 10,
+	BFA_AEN_MAX_CAT 	= 10
+};
+
+#pragma pack(1)
+union bfa_aen_data_u {
+	struct bfa_adapter_aen_data_s 	adapter;
+	struct bfa_port_aen_data_s 	port;
+	struct bfa_lport_aen_data_s 	lport;
+	struct bfa_rport_aen_data_s 	rport;
+	struct bfa_itnim_aen_data_s 	itnim;
+	struct bfa_audit_aen_data_s 	audit;
+	struct bfa_ioc_aen_data_s 	ioc;
+	struct bfa_ethport_aen_data_s 	ethport;
+};
+
+struct bfa_aen_entry_s {
+	enum bfa_aen_category 	aen_category;
+	int			aen_type;
+	union bfa_aen_data_u  	aen_data;
+	struct bfa_timeval_s   	aen_tv;
+	s32         	seq_num;
+	s32         	bfad_num;
+	s32         	rsvd[1];
+};
+
+#pragma pack()
+
+#define bfa_aen_event_t int
+
+#endif /* __BFA_DEFS_AEN_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_audit.h b/drivers/scsi/bfa/include/defs/bfa_defs_audit.h
new file mode 100644
index 000000000000..8e3a962bf20c
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_audit.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_AUDIT_H__
+#define __BFA_DEFS_AUDIT_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * BFA audit events
+ */
+enum bfa_audit_aen_event {
+	BFA_AUDIT_AEN_AUTH_ENABLE 	= 1,
+	BFA_AUDIT_AEN_AUTH_DISABLE 	= 2,
+};
+
+/**
+ * audit event data
+ */
+struct bfa_audit_aen_data_s {
+	wwn_t           pwwn;
+};
+
+#endif /* __BFA_DEFS_AUDIT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_auth.h b/drivers/scsi/bfa/include/defs/bfa_defs_auth.h
new file mode 100644
index 000000000000..dd19c83aba58
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_auth.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_AUTH_H__
+#define __BFA_DEFS_AUTH_H__
+
+#include <defs/bfa_defs_types.h>
+
+#define PUBLIC_KEY			15409
+#define PRIVATE_KEY			19009
+#define KEY_LEN				32399
+#define BFA_AUTH_SECRET_STRING_LEN	256
+#define BFA_AUTH_FAIL_TIMEOUT		0xFF
+
+/**
+ * Authentication status
+ */
+enum bfa_auth_status {
+	BFA_AUTH_STATUS_NONE 	= 0,	/*  no authentication */
+	BFA_AUTH_UNINIT 	= 1,	/*  state - uninit */
+	BFA_AUTH_NEG_SEND 	= 2,	/*  state - negotiate send */
+	BFA_AUTH_CHAL_WAIT 	= 3,	/*  state - challenge wait */
+	BFA_AUTH_NEG_RETRY 	= 4,	/*  state - negotiate retry */
+	BFA_AUTH_REPLY_SEND 	= 5,	/*  state - reply send */
+	BFA_AUTH_STATUS_WAIT 	= 6,	/*  state - status wait */
+	BFA_AUTH_SUCCESS 	= 7,	/*  state - success */
+	BFA_AUTH_FAILED 	= 8,	/*  state - failed */
+	BFA_AUTH_STATUS_UNKNOWN = 9,	/*  authentication status unknown */
+};
+
+struct auth_proto_stats_s {
+	u32        auth_rjts;
+	u32        auth_negs;
+	u32        auth_dones;
+
+	u32        dhchap_challenges;
+	u32        dhchap_replies;
+	u32        dhchap_successes;
+};
+
+/**
+ * Authentication related statistics
+ */
+struct bfa_auth_stats_s {
+	u32           auth_failures;	/*  authentication failures */
+	u32           auth_successes;	/*  authentication successes*/
+	struct auth_proto_stats_s auth_rx_stats; /*  Rx protocol stats */
+	struct auth_proto_stats_s auth_tx_stats; /*  Tx protocol stats */
+};
+
+/**
+ * Authentication hash function algorithms
+ */
+enum bfa_auth_algo {
+	BFA_AUTH_ALGO_MD5 	= 1,	/*  Message-Digest algorithm 5 */
+	BFA_AUTH_ALGO_SHA1 	= 2,	/*  Secure Hash Algorithm 1 */
+	BFA_AUTH_ALGO_MS 	= 3,	/*  MD5, then SHA-1 */
+	BFA_AUTH_ALGO_SM 	= 4,	/*  SHA-1, then MD5 */
+};
+
+/**
+ * DH Groups
+ *
+ * Current value could be combination of one or more of the following values
+ */
+enum bfa_auth_group {
+	BFA_AUTH_GROUP_DHNULL 	= 0,	/*  DH NULL (value == 0) */
+	BFA_AUTH_GROUP_DH768 	= 1,	/*  DH group 768 (value == 1) */
+	BFA_AUTH_GROUP_DH1024 	= 2,	/*  DH group 1024 (value == 2) */
+	BFA_AUTH_GROUP_DH1280 	= 4,	/*  DH group 1280 (value == 3) */
+	BFA_AUTH_GROUP_DH1536 	= 8,	/*  DH group 1536 (value == 4) */
+
+	BFA_AUTH_GROUP_ALL 	= 256	/*  Use default DH group order
+					 *    0, 1, 2, 3, 4 */
+};
+
+/**
+ * Authentication secret sources
+ */
+enum bfa_auth_secretsource {
+	BFA_AUTH_SECSRC_LOCAL 	= 1,	/*  locally configured */
+	BFA_AUTH_SECSRC_RADIUS 	= 2,	/*  use radius server */
+	BFA_AUTH_SECSRC_TACACS 	= 3,	/*  TACACS server */
+};
+
+/**
+ * Authentication attributes
+ */
+struct bfa_auth_attr_s {
+	enum bfa_auth_status 	status;
+	enum bfa_auth_algo 	algo;
+	enum bfa_auth_group 	dh_grp;
+	u16		rjt_code;
+	u16		rjt_code_exp;
+	u8			secret_set;
+	u8			resv[7];
+};
+
+#endif /* __BFA_DEFS_AUTH_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_boot.h b/drivers/scsi/bfa/include/defs/bfa_defs_boot.h
new file mode 100644
index 000000000000..6f4aa5283545
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_boot.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_BOOT_H__
+#define __BFA_DEFS_BOOT_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_pport.h>
+
+enum {
+	BFA_BOOT_BOOTLUN_MAX = 4,	/*  maximum boot lun per IOC */
+};
+
+#define BOOT_CFG_REV1	1
+
+/**
+ *      Boot options setting. Boot options setting determines from where
+ *      to get the boot lun information
+ */
+enum bfa_boot_bootopt {
+    BFA_BOOT_AUTO_DISCOVER = 0,    /*  Boot from blun provided by fabric */
+    BFA_BOOT_STORED_BLUN   = 1,    /*  Boot from bluns stored in flash   */
+    BFA_BOOT_FIRST_LUN     = 2,    /*  Boot from first discovered blun   */
+};
+
+/**
+ * Boot lun information.
+ */
+struct bfa_boot_bootlun_s {
+	wwn_t           pwwn;	/*  port wwn of target */
+	lun_t           lun;	/*  64-bit lun */
+};
+
+/**
+ * BOOT boot configuraton
+ */
+struct bfa_boot_cfg_s {
+	u8         version;
+	u8         rsvd1;
+	u16        chksum;
+
+	u8         enable;		/*  enable/disable SAN boot */
+	u8         speed;		/*  boot speed settings */
+	u8         topology;	/*  boot topology setting */
+	u8         bootopt;	/*  bfa_boot_bootopt_t */
+
+	u32        nbluns;		/*  number of boot luns */
+
+	u32        rsvd2;
+
+	struct bfa_boot_bootlun_s blun[BFA_BOOT_BOOTLUN_MAX];
+	struct bfa_boot_bootlun_s blun_disc[BFA_BOOT_BOOTLUN_MAX];
+};
+
+
+#endif /* __BFA_DEFS_BOOT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
new file mode 100644
index 000000000000..520a22f52dd1
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ *  bfa_defs_cee.h Interface declarations between host based
+ *	BFAL and DCBX/LLDP module in Firmware
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_CEE_H__
+#define __BFA_DEFS_CEE_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_pport.h>
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+#define BFA_CEE_LLDP_MAX_STRING_LEN (128)
+
+
+/* FIXME: this is coming from the protocol spec. Can the host & apps share the
+   protocol .h files ?
+ */
+#define BFA_CEE_LLDP_SYS_CAP_OTHER       0x0001
+#define BFA_CEE_LLDP_SYS_CAP_REPEATER    0x0002
+#define BFA_CEE_LLDP_SYS_CAP_MAC_BRIDGE  0x0004
+#define BFA_CEE_LLDP_SYS_CAP_WLAN_AP     0x0008
+#define BFA_CEE_LLDP_SYS_CAP_ROUTER      0x0010
+#define BFA_CEE_LLDP_SYS_CAP_TELEPHONE 	 0x0020
+#define BFA_CEE_LLDP_SYS_CAP_DOCSIS_CD   0x0040
+#define BFA_CEE_LLDP_SYS_CAP_STATION     0x0080
+#define BFA_CEE_LLDP_SYS_CAP_CVLAN	     0x0100
+#define BFA_CEE_LLDP_SYS_CAP_SVLAN 	     0x0200
+#define BFA_CEE_LLDP_SYS_CAP_TPMR		 0x0400
+
+
+/* LLDP string type */
+struct bfa_cee_lldp_str_s {
+	u8 sub_type;
+	u8 len;
+	u8 rsvd[2];
+	u8 value[BFA_CEE_LLDP_MAX_STRING_LEN];
+};
+
+
+/* LLDP paramters */
+struct bfa_cee_lldp_cfg_s {
+	struct bfa_cee_lldp_str_s chassis_id;
+	struct bfa_cee_lldp_str_s port_id;
+	struct bfa_cee_lldp_str_s port_desc;
+	struct bfa_cee_lldp_str_s sys_name;
+	struct bfa_cee_lldp_str_s sys_desc;
+	struct bfa_cee_lldp_str_s mgmt_addr;
+	u16    time_to_interval;
+	u16    enabled_system_cap;
+};
+
+enum bfa_cee_dcbx_version_e {
+	DCBX_PROTOCOL_PRECEE = 1,
+	DCBX_PROTOCOL_CEE    = 2,
+};
+
+enum bfa_cee_lls_e {
+	CEE_LLS_DOWN_NO_TLV = 0, /* LLS is down because the TLV not sent by
+				  * the peer */
+	CEE_LLS_DOWN        = 1, /* LLS is down as advertised by the peer */
+	CEE_LLS_UP          = 2,
+};
+
+/* CEE/DCBX parameters */
+struct bfa_cee_dcbx_cfg_s {
+	u8 pgid[8];
+	u8 pg_percentage[8];
+	u8 pfc_enabled;          /* bitmap of priorties with PFC enabled */
+	u8 fcoe_user_priority;   /* bitmap of priorities used for FcoE
+				       * traffic */
+	u8 dcbx_version;	/* operating version:CEE or preCEE */
+	u8 lls_fcoe;	/* FCoE Logical Link Status */
+	u8 lls_lan;	/* LAN Logical Link Status */
+	u8 rsvd[3];
+};
+
+/* CEE status */
+/* Making this to tri-state for the benefit of port list command */
+enum bfa_cee_status_e {
+    CEE_PHY_DOWN = 0,
+    CEE_PHY_UP = 1,
+    CEE_UP = 2,
+};
+
+/* CEE Query */
+struct bfa_cee_attr_s {
+	u8                   cee_status;
+	u8                   error_reason;
+	struct bfa_cee_lldp_cfg_s lldp_remote;
+	struct bfa_cee_dcbx_cfg_s dcbx_remote;
+	mac_t src_mac;
+	u8 link_speed;
+	u8 filler[3];
+};
+
+
+
+
+/* LLDP/DCBX/CEE Statistics */
+
+struct bfa_cee_lldp_stats_s {
+	u32 frames_transmitted;
+	u32 frames_aged_out;
+	u32 frames_discarded;
+	u32 frames_in_error;
+	u32 frames_rcvd;
+	u32 tlvs_discarded;
+	u32 tlvs_unrecognized;
+};
+
+struct bfa_cee_dcbx_stats_s {
+	u32 subtlvs_unrecognized;
+	u32 negotiation_failed;
+	u32 remote_cfg_changed;
+	u32 tlvs_received;
+	u32 tlvs_invalid;
+	u32 seqno;
+	u32 ackno;
+	u32 recvd_seqno;
+	u32 recvd_ackno;
+};
+
+struct bfa_cee_cfg_stats_s {
+	u32 cee_status_down;
+	u32 cee_status_up;
+	u32 cee_hw_cfg_changed;
+	u32 recvd_invalid_cfg;
+};
+
+
+struct bfa_cee_stats_s {
+	struct bfa_cee_lldp_stats_s lldp_stats;
+	struct bfa_cee_dcbx_stats_s dcbx_stats;
+	struct bfa_cee_cfg_stats_s  cfg_stats;
+};
+
+#pragma pack()
+
+
+#endif	/* __BFA_DEFS_CEE_H__ */
+
+
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_driver.h b/drivers/scsi/bfa/include/defs/bfa_defs_driver.h
new file mode 100644
index 000000000000..57049805762b
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_driver.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_DRIVER_H__
+#define __BFA_DEFS_DRIVER_H__
+
+/**
+ * Driver statistics
+ */
+	u16    tm_io_abort;
+    u16    tm_io_abort_comp;
+    u16    tm_lun_reset;
+    u16    tm_lun_reset_comp;
+    u16    tm_target_reset;
+    u16    tm_bus_reset;
+    u16    ioc_restart;        /*  IOC restart count */
+    u16    io_pending;         /*  outstanding io count per-IOC */
+    u64    control_req;
+    u64    input_req;
+    u64    output_req;
+    u64    input_words;
+    u64    output_words;
+} bfa_driver_stats_t;
+
+
+#endif /* __BFA_DEFS_DRIVER_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h b/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h
new file mode 100644
index 000000000000..79f9b3e146f7
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_ETHPORT_H__
+#define __BFA_DEFS_ETHPORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <protocol/types.h>
+#include <cna/pstats/phyport_defs.h>
+#include <cna/pstats/ethport_defs.h>
+
+struct bna_tx_info_s {
+	u32    miniport_state;
+	u32    adapter_state;
+	u64    tx_count;
+	u64    tx_wi;
+	u64    tx_sg;
+	u64    tx_tcp_chksum;
+	u64    tx_udp_chksum;
+	u64    tx_ip_chksum;
+	u64    tx_lsov1;
+	u64    tx_lsov2;
+	u64    tx_max_sg_len ;
+};
+
+struct bna_rx_queue_info_s {
+	u16    q_id ;
+	u16    buf_size ;
+	u16    buf_count ;
+	u16    rsvd ;
+	u64    rx_count ;
+	u64    rx_dropped ;
+	u64    rx_unsupported ;
+	u64    rx_internal_err ;
+	u64    rss_count ;
+	u64    vlan_count ;
+	u64    rx_tcp_chksum ;
+	u64    rx_udp_chksum ;
+	u64    rx_ip_chksum ;
+	u64    rx_hds ;
+};
+
+struct bna_rx_q_set_s {
+	u16    q_set_type;
+	u32    miniport_state;
+	u32    adapter_state;
+	struct bna_rx_queue_info_s    rx_queue[2];
+};
+
+struct bna_port_stats_s {
+	struct bna_tx_info_s   tx_stats;
+	u16        qset_count ;
+	struct bna_rx_q_set_s  rx_qset[8];
+};
+
+struct bfa_ethport_stats_s {
+	struct bna_stats_txf	txf_stats[1];
+	struct bna_stats_rxf	rxf_stats[1];
+	struct bnad_drv_stats drv_stats;
+};
+
+/**
+ * Ethernet port events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ETH_LINKUP:    [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_LINKDOWN:  [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_ENABLE:  [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_DISABLE:  [in]: mac [out]: mac
+ *
+ */
+enum bfa_ethport_aen_event {
+	BFA_ETHPORT_AEN_LINKUP = 1, /*  Base Port Ethernet link up event */
+	BFA_ETHPORT_AEN_LINKDOWN = 2, /*  Base Port Ethernet link down event */
+	BFA_ETHPORT_AEN_ENABLE = 3, /*  Base Port Ethernet link enable event */
+	BFA_ETHPORT_AEN_DISABLE = 4, /*  Base Port Ethernet link disable
+				      * event */
+};
+
+struct bfa_ethport_aen_data_s {
+	mac_t mac;	/*  MAC address of the physical port */
+};
+
+
+#endif /* __BFA_DEFS_ETHPORT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_fcpim.h b/drivers/scsi/bfa/include/defs/bfa_defs_fcpim.h
new file mode 100644
index 000000000000..c08f4f5026ac
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_fcpim.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_FCPIM_H__
+#define __BFA_DEFS_FCPIM_H__
+
+struct bfa_fcpim_stats_s {
+	u32        total_ios;	/*  Total IO count */
+	u32        qresumes;	/*  IO waiting for CQ space */
+	u32        no_iotags;	/*  NO IO contexts */
+	u32        io_aborts;	/*  IO abort requests */
+	u32        no_tskims;	/*  NO task management contexts */
+	u32        iocomp_ok;	/*  IO completions with OK status */
+	u32        iocomp_underrun;	/*  IO underrun (good) */
+	u32        iocomp_overrun;	/*  IO overrun (good) */
+	u32        iocomp_aborted;	/*  Aborted IO requests */
+	u32        iocomp_timedout;	/*  IO timeouts */
+	u32        iocom_nexus_abort;	/*  IO selection timeouts */
+	u32        iocom_proto_err;	/*  IO protocol errors */
+	u32        iocom_dif_err;	/*  IO SBC-3 protection errors */
+	u32        iocom_tm_abort;	/*  IO aborted by TM requests */
+	u32        iocom_sqer_needed;	/*  IO retry for SQ error
+						 *recovery */
+	u32        iocom_res_free;	/*  Delayed freeing of IO resources */
+	u32        iocomp_scsierr;	/*  IO with non-good SCSI status */
+	u32        iocom_hostabrts;	/*  Host IO abort requests */
+	u32        iocom_utags;	/*  IO comp with unknown tags */
+	u32        io_cleanups;	/*  IO implicitly aborted */
+	u32        io_tmaborts;	/*  IO aborted due to TM commands */
+	u32        rsvd;
+};
+#endif /*__BFA_DEFS_FCPIM_H__*/
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h b/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h
new file mode 100644
index 000000000000..9ccf53bef65a
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IM_COMMON_H__
+#define __BFA_DEFS_IM_COMMON_H__
+
+#define	BFA_ADAPTER_NAME_LEN	256
+#define BFA_ADAPTER_GUID_LEN    256
+#define RESERVED_VLAN_NAME      L"PORT VLAN"
+#define PASSTHRU_VLAN_NAME      L"PASSTHRU VLAN"
+
+	u64	tx_pkt_cnt;
+	u64	rx_pkt_cnt;
+	u32	duration;
+	u8		status;
+} bfa_im_stats_t, *pbfa_im_stats_t;
+
+#endif /* __BFA_DEFS_IM_COMMON_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h b/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h
new file mode 100644
index 000000000000..a486a7eb81d6
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IM_TEAM_H__
+#define __BFA_DEFS_IM_TEAM_H__
+
+#include <protocol/types.h>
+
+#define	BFA_TEAM_MAX_PORTS	8
+#define	BFA_TEAM_NAME_LEN	256
+#define BFA_MAX_NUM_TEAMS	16
+#define BFA_TEAM_INVALID_DELAY -1
+
+	BFA_LACP_RATE_SLOW = 1,
+	BFA_LACP_RATE_FAST
+} bfa_im_lacp_rate_t;
+
+	BFA_TEAM_MODE_FAIL_OVER = 1,
+	BFA_TEAM_MODE_FAIL_BACK,
+	BFA_TEAM_MODE_LACP,
+	BFA_TEAM_MODE_NONE
+} bfa_im_team_mode_t;
+
+	BFA_XMIT_POLICY_L2 = 1,
+	BFA_XMIT_POLICY_L3_L4
+} bfa_im_xmit_policy_t;
+
+	bfa_im_team_mode_t     team_mode;
+	bfa_im_lacp_rate_t     lacp_rate;
+	bfa_im_xmit_policy_t   xmit_policy;
+	int   	          delay;
+	wchar_t    	  primary[BFA_ADAPTER_NAME_LEN];
+	wchar_t        	  preferred_primary[BFA_ADAPTER_NAME_LEN];
+	mac_t	          mac;
+	u16       	  num_ports;
+	u16          num_vlans;
+	u16 vlan_list[BFA_MAX_VLANS_PER_PORT];
+	wchar_t	 team_guid_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_GUID_LEN];
+	wchar_t	 ioc_name_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_NAME_LEN];
+} bfa_im_team_attr_t;
+
+	wchar_t		             team_name[BFA_TEAM_NAME_LEN];
+	bfa_im_xmit_policy_t	 xmit_policy;
+	int                 	 delay;
+	wchar_t                	 primary[BFA_ADAPTER_NAME_LEN];
+	wchar_t               	 preferred_primary[BFA_ADAPTER_NAME_LEN];
+} bfa_im_team_edit_t, *pbfa_im_team_edit_t;
+
+	wchar_t					team_name[BFA_TEAM_NAME_LEN];
+	bfa_im_team_mode_t      team_mode;
+	mac_t	               	mac;
+} bfa_im_team_info_t;
+
+	bfa_im_team_info_t 		team_info[BFA_MAX_NUM_TEAMS];
+	u16 				num_teams;
+} bfa_im_team_list_t, *pbfa_im_team_list_t;
+
+#endif /* __BFA_DEFS_IM_TEAM_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h b/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h
new file mode 100644
index 000000000000..b1d532da3a9d
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IOC_H__
+#define __BFA_DEFS_IOC_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_pm.h>
+
+enum {
+	BFA_IOC_DRIVER_LEN	= 16,
+	BFA_IOC_CHIP_REV_LEN 	= 8,
+};
+
+/**
+ * Driver and firmware versions.
+ */
+struct bfa_ioc_driver_attr_s {
+	char            driver[BFA_IOC_DRIVER_LEN];	/*  driver name */
+	char            driver_ver[BFA_VERSION_LEN];	/*  driver version */
+	char            fw_ver[BFA_VERSION_LEN];	/*  firmware version*/
+	char            bios_ver[BFA_VERSION_LEN];	/*  bios version */
+	char            efi_ver[BFA_VERSION_LEN];	/*  EFI version */
+	char            ob_ver[BFA_VERSION_LEN];	/*  openboot version*/
+};
+
+/**
+ * IOC PCI device attributes
+ */
+struct bfa_ioc_pci_attr_s {
+	u16        vendor_id;	/*  PCI vendor ID */
+	u16        device_id;	/*  PCI device ID */
+	u16        ssid;		/*  subsystem ID */
+	u16        ssvid;		/*  subsystem vendor ID */
+	u32        pcifn;		/*  PCI device function */
+	u32        rsvd;		/* padding */
+	u8         chip_rev[BFA_IOC_CHIP_REV_LEN];	 /*  chip revision */
+};
+
+/**
+ * IOC states
+ */
+enum bfa_ioc_state {
+	BFA_IOC_RESET       = 1,  /*  IOC is in reset state */
+	BFA_IOC_SEMWAIT     = 2,  /*  Waiting for IOC hardware semaphore */
+	BFA_IOC_HWINIT 	    = 3,  /*  IOC hardware is being initialized */
+	BFA_IOC_GETATTR     = 4,  /*  IOC is being configured */
+	BFA_IOC_OPERATIONAL = 5,  /*  IOC is operational */
+	BFA_IOC_INITFAIL    = 6,  /*  IOC hardware failure */
+	BFA_IOC_HBFAIL      = 7,  /*  IOC heart-beat failure */
+	BFA_IOC_DISABLING   = 8,  /*  IOC is being disabled */
+	BFA_IOC_DISABLED    = 9,  /*  IOC is disabled */
+	BFA_IOC_FWMISMATCH  = 10, /*  IOC firmware different from drivers */
+};
+
+/**
+ * IOC firmware stats
+ */
+struct bfa_fw_ioc_stats_s {
+	u32        hb_count;
+	u32        cfg_reqs;
+	u32        enable_reqs;
+	u32        disable_reqs;
+	u32        stats_reqs;
+	u32        clrstats_reqs;
+	u32        unknown_reqs;
+	u32        ic_reqs;		/*  interrupt coalesce reqs */
+};
+
+/**
+ * IOC driver stats
+ */
+struct bfa_ioc_drv_stats_s {
+	u32	ioc_isrs;
+	u32	ioc_enables;
+	u32	ioc_disables;
+	u32	ioc_hbfails;
+	u32	ioc_boots;
+	u32	stats_tmos;
+	u32        hb_count;
+	u32        disable_reqs;
+	u32        enable_reqs;
+	u32        disable_replies;
+	u32        enable_replies;
+};
+
+/**
+ * IOC statistics
+ */
+struct bfa_ioc_stats_s {
+	struct bfa_ioc_drv_stats_s	drv_stats; /*  driver IOC stats */
+	struct bfa_fw_ioc_stats_s 	fw_stats;  /*  firmware IOC stats */
+};
+
+
+enum bfa_ioc_type_e {
+	BFA_IOC_TYPE_FC	  = 1,
+	BFA_IOC_TYPE_FCoE = 2,
+	BFA_IOC_TYPE_LL	  = 3,
+};
+
+/**
+ * IOC attributes returned in queries
+ */
+struct bfa_ioc_attr_s {
+	enum bfa_ioc_type_e		ioc_type;
+	enum bfa_ioc_state 		state;		/*  IOC state      */
+	struct bfa_adapter_attr_s	adapter_attr;	/*  HBA attributes */
+	struct bfa_ioc_driver_attr_s 	driver_attr;	/*  driver attr    */
+	struct bfa_ioc_pci_attr_s	pci_attr;
+	u8				port_id;	/*  port number    */
+};
+
+/**
+ * BFA IOC level events
+ */
+enum bfa_ioc_aen_event {
+	BFA_IOC_AEN_HBGOOD	= 1,	/*  Heart Beat restore event	*/
+	BFA_IOC_AEN_HBFAIL	= 2,	/*  Heart Beat failure event	*/
+	BFA_IOC_AEN_ENABLE	= 3,	/*  IOC enabled event		*/
+	BFA_IOC_AEN_DISABLE	= 4,	/*  IOC disabled event		*/
+	BFA_IOC_AEN_FWMISMATCH	= 5,	/*  IOC firmware mismatch	*/
+};
+
+/**
+ * BFA IOC level event data, now just a place holder
+ */
+struct bfa_ioc_aen_data_s {
+	enum bfa_ioc_type_e ioc_type;
+	wwn_t	pwwn;
+	mac_t	mac;
+};
+
+#endif /* __BFA_DEFS_IOC_H__ */
+
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h b/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h
new file mode 100644
index 000000000000..d76bcbd9820f
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h
@@ -0,0 +1,310 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IOCFC_H__
+#define __BFA_DEFS_IOCFC_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_pm.h>
+
+#define BFA_IOCFC_INTR_DELAY	1125
+#define BFA_IOCFC_INTR_LATENCY	225
+
+/**
+ * Interrupt coalescing configuration.
+ */
+struct bfa_iocfc_intr_attr_s {
+	bfa_boolean_t	coalesce;	/*  enable/disable coalescing */
+	u16	latency;	/*  latency in microseconds   */
+	u16	delay;		/*  delay in microseconds     */
+};
+
+/**
+ * IOC firmware configuraton
+ */
+struct bfa_iocfc_fwcfg_s {
+	u16        num_fabrics;	/*  number of fabrics		*/
+	u16        num_lports;	/*  number of local lports	*/
+	u16        num_rports;	/*  number of remote ports	*/
+	u16        num_ioim_reqs;	/*  number of IO reqs		*/
+	u16        num_tskim_reqs;	/*  task management requests	*/
+	u16        num_iotm_reqs;	/*  number of TM IO reqs	*/
+	u16        num_tsktm_reqs;	/*  TM task management requests*/
+	u16        num_fcxp_reqs;	/*  unassisted FC exchanges	*/
+	u16        num_uf_bufs;	/*  unsolicited recv buffers	*/
+	u8		num_cqs;
+	u8		rsvd;
+};
+
+struct bfa_iocfc_drvcfg_s {
+	u16        num_reqq_elems;	/*  number of req queue elements */
+	u16        num_rspq_elems;	/*  number of rsp queue elements */
+	u16        num_sgpgs;	/*  number of total SG pages	  */
+	u16        num_sboot_tgts;	/*  number of SAN boot targets	  */
+	u16        num_sboot_luns;	/*  number of SAN boot luns	  */
+	u16	    ioc_recover;	/*  IOC recovery mode		  */
+	u16	    min_cfg;	/*  minimum configuration	  */
+	u16        path_tov;	/*  device path timeout	  */
+	bfa_boolean_t   delay_comp; /*  delay completion of
+							failed inflight IOs */
+	u32		rsvd;
+};
+/**
+ * IOC configuration
+ */
+struct bfa_iocfc_cfg_s {
+	struct bfa_iocfc_fwcfg_s	fwcfg;	/*  firmware side config */
+	struct bfa_iocfc_drvcfg_s	drvcfg;	/*  driver side config	  */
+};
+
+/**
+ * IOC firmware IO stats
+ */
+struct bfa_fw_io_stats_s {
+	u32	host_abort;		/*  IO aborted by host driver*/
+	u32	host_cleanup;		/*  IO clean up by host driver */
+
+	u32	fw_io_timeout;		/*  IOs timedout */
+	u32	fw_frm_parse;		/*  frame parsed by f/w */
+	u32	fw_frm_data;		/*  fcp_data frame parsed by f/w */
+	u32	fw_frm_rsp;		/*  fcp_rsp frame parsed by f/w */
+	u32	fw_frm_xfer_rdy;	/*  xfer_rdy frame parsed by f/w */
+	u32	fw_frm_bls_acc;		/*  BLS ACC  frame parsed by f/w */
+	u32	fw_frm_tgt_abort;	/*  target ABTS parsed by f/w */
+	u32	fw_frm_unknown;		/*  unknown parsed by f/w */
+	u32	fw_data_dma;		/*  f/w DMA'ed the data frame */
+	u32	fw_frm_drop;		/*  f/w drop the frame */
+
+	u32	rec_timeout;		/*  FW rec timed out */
+	u32	error_rec;			/*  FW sending rec on
+							* an error condition*/
+	u32	wait_for_si;		/*  FW wait for SI */
+	u32	rec_rsp_inval;		/*  REC rsp invalid */
+	u32	seqr_io_abort;		/*  target does not know cmd so abort */
+	u32	seqr_io_retry;		/*  SEQR failed so retry IO */
+
+	u32	itn_cisc_upd_rsp;	/*  ITN cisc updated on fcp_rsp */
+	u32	itn_cisc_upd_data;	/*  ITN cisc updated on fcp_data */
+	u32	itn_cisc_upd_xfer_rdy;	/*  ITN cisc updated on fcp_data */
+
+	u32	fcp_data_lost;		/*  fcp data lost */
+
+	u32	ro_set_in_xfer_rdy;	/*  Target set RO in Xfer_rdy frame */
+	u32	xfer_rdy_ooo_err;	/*  Out of order Xfer_rdy received */
+	u32	xfer_rdy_unknown_err;	/*  unknown error in xfer_rdy frame */
+
+	u32	io_abort_timeout;	/*  ABTS timedout  */
+	u32	sler_initiated;		/*  SLER initiated */
+
+	u32	unexp_fcp_rsp;		/*  fcp response in wrong state */
+
+	u32	fcp_rsp_under_run;	/*  fcp rsp IO underrun */
+	u32        fcp_rsp_under_run_wr;   /*  fcp rsp IO underrun for write */
+	u32	fcp_rsp_under_run_err;	/*  fcp rsp IO underrun error */
+	u32        fcp_rsp_resid_inval;    /*  invalid residue */
+	u32	fcp_rsp_over_run;	/*  fcp rsp IO overrun */
+	u32	fcp_rsp_over_run_err;	/*  fcp rsp IO overrun error */
+	u32	fcp_rsp_proto_err;	/*  protocol error in fcp rsp */
+	u32	fcp_rsp_sense_err;	/*  error in sense info in fcp rsp */
+	u32	fcp_conf_req;		/*  FCP conf requested */
+
+	u32	tgt_aborted_io;		/*  target initiated abort */
+
+	u32	ioh_edtov_timeout_event;/*  IOH edtov timer popped */
+	u32	ioh_fcp_rsp_excp_event;	/*  IOH FCP_RSP exception */
+	u32	ioh_fcp_conf_event;	/*  IOH FCP_CONF */
+	u32	ioh_mult_frm_rsp_event;	/*  IOH multi_frame FCP_RSP */
+	u32	ioh_hit_class2_event;	/*  IOH hit class2 */
+	u32	ioh_miss_other_event;	/*  IOH miss other */
+	u32	ioh_seq_cnt_err_event;	/*  IOH seq cnt error */
+	u32	ioh_len_err_event;		/*  IOH len error - fcp_dl !=
+							* bytes xfered */
+	u32	ioh_seq_len_err_event;	/*  IOH seq len error */
+	u32	ioh_data_oor_event;	/*  Data out of range */
+	u32	ioh_ro_ooo_event;	/*  Relative offset out of range */
+	u32	ioh_cpu_owned_event;	/*  IOH hit -iost owned by f/w */
+	u32	ioh_unexp_frame_event;	/*  unexpected frame recieved
+						 *   count */
+	u32	ioh_err_int;		/*  IOH error int during data-phase
+						 *   for scsi write
+						 */
+};
+
+/**
+ * IOC port firmware stats
+ */
+
+struct bfa_fw_port_fpg_stats_s {
+    u32    intr_evt;
+    u32    intr;
+    u32    intr_excess;
+    u32    intr_cause0;
+    u32    intr_other;
+    u32    intr_other_ign;
+    u32    sig_lost;
+    u32    sig_regained;
+    u32    sync_lost;
+    u32    sync_to;
+    u32    sync_regained;
+    u32    div2_overflow;
+    u32    div2_underflow;
+    u32    efifo_overflow;
+    u32    efifo_underflow;
+    u32    idle_rx;
+    u32    lrr_rx;
+    u32    lr_rx;
+    u32    ols_rx;
+    u32    nos_rx;
+    u32    lip_rx;
+    u32    arbf0_rx;
+    u32    mrk_rx;
+    u32    const_mrk_rx;
+    u32    prim_unknown;
+    u32    rsvd;
+};
+
+
+struct bfa_fw_port_lksm_stats_s {
+    u32    hwsm_success;       /*  hwsm state machine success          */
+    u32    hwsm_fails;         /*  hwsm fails                          */
+    u32    hwsm_wdtov;         /*  hwsm timed out                      */
+    u32    swsm_success;       /*  swsm success                        */
+    u32    swsm_fails;         /*  swsm fails                          */
+    u32    swsm_wdtov;         /*  swsm timed out                      */
+    u32    busybufs;           /*  link init failed due to busybuf     */
+    u32    buf_waits;          /*  bufwait state entries               */
+    u32    link_fails;         /*  link failures                       */
+    u32    psp_errors;         /*  primitive sequence protocol errors  */
+    u32    lr_unexp;           /*  No. of times LR rx-ed unexpectedly  */
+    u32    lrr_unexp;          /*  No. of times LRR rx-ed unexpectedly */
+    u32    lr_tx;              /*  No. of times LR tx started          */
+    u32    lrr_tx;             /*  No. of times LRR tx started         */
+    u32    ols_tx;             /*  No. of times OLS tx started         */
+    u32    nos_tx;             /*  No. of times NOS tx started         */
+};
+
+
+struct bfa_fw_port_snsm_stats_s {
+    u32    hwsm_success;       /*  Successful hwsm terminations        */
+    u32    hwsm_fails;         /*  hwsm fail count                     */
+    u32    hwsm_wdtov;         /*  hwsm timed out                      */
+    u32    swsm_success;       /*  swsm success                        */
+    u32    swsm_wdtov;         /*  swsm timed out                      */
+    u32    error_resets;       /*  error resets initiated by upsm      */
+    u32    sync_lost;          /*  Sync loss count                     */
+    u32    sig_lost;           /*  Signal loss count                   */
+};
+
+
+struct bfa_fw_port_physm_stats_s {
+    u32    module_inserts;     /*  Module insert count                 */
+    u32    module_xtracts;     /*  Module extracts count               */
+    u32    module_invalids;    /*  Invalid module inserted count       */
+    u32    module_read_ign;    /*  Module validation status ignored    */
+    u32    laser_faults;       /*  Laser fault count                   */
+    u32    rsvd;
+};
+
+
+struct bfa_fw_fip_stats_s {
+    u32    disc_req;           /*  Discovery solicit requests          */
+    u32    disc_rsp;           /*  Discovery solicit response          */
+    u32    disc_err;           /*  Discovery advt. parse errors        */
+    u32    disc_unsol;         /*  Discovery unsolicited               */
+    u32    disc_timeouts;      /*  Discovery timeouts                  */
+    u32    linksvc_unsupp;     /*  Unsupported link service req        */
+    u32    linksvc_err;        /*  Parse error in link service req     */
+    u32    logo_req;           /*  Number of FIP logos received        */
+    u32    clrvlink_req;       /*  Clear virtual link req              */
+    u32    op_unsupp;          /*  Unsupported FIP operation           */
+    u32    untagged;           /*  Untagged frames (ignored)           */
+    u32    rsvd;
+};
+
+
+struct bfa_fw_lps_stats_s {
+    u32    mac_invalids;       /*  Invalid mac assigned                */
+    u32    rsvd;
+};
+
+
+struct bfa_fw_fcoe_stats_s {
+    u32    cee_linkups;        /*  CEE link up count                   */
+    u32    cee_linkdns;        /*  CEE link down count                 */
+    u32    fip_linkups;        /*  FIP link up count                   */
+    u32    fip_linkdns;        /*  FIP link up count                   */
+    u32    fip_fails;          /*  FIP fail count                      */
+    u32    mac_invalids;       /*  Invalid mac assigned                */
+};
+
+/**
+ * IOC firmware FCoE port stats
+ */
+struct bfa_fw_fcoe_port_stats_s {
+    struct bfa_fw_fcoe_stats_s  fcoe_stats;
+    struct bfa_fw_fip_stats_s   fip_stats;
+};
+
+/**
+ * IOC firmware FC port stats
+ */
+struct bfa_fw_fc_port_stats_s {
+	struct bfa_fw_port_fpg_stats_s		fpg_stats;
+	struct bfa_fw_port_physm_stats_s	physm_stats;
+	struct bfa_fw_port_snsm_stats_s		snsm_stats;
+	struct bfa_fw_port_lksm_stats_s		lksm_stats;
+};
+
+/**
+ * IOC firmware FC port stats
+ */
+union bfa_fw_port_stats_s {
+	struct bfa_fw_fc_port_stats_s	fc_stats;
+	struct bfa_fw_fcoe_port_stats_s	fcoe_stats;
+};
+
+/**
+ * IOC firmware stats
+ */
+struct bfa_fw_stats_s {
+	struct bfa_fw_ioc_stats_s	ioc_stats;
+	struct bfa_fw_io_stats_s	io_stats;
+	union  bfa_fw_port_stats_s	port_stats;
+};
+
+/**
+ * IOC statistics
+ */
+struct bfa_iocfc_stats_s {
+	struct bfa_fw_stats_s 	fw_stats;	/*  firmware IOC stats      */
+};
+
+/**
+ * IOC attributes returned in queries
+ */
+struct bfa_iocfc_attr_s {
+	struct bfa_iocfc_cfg_s		config;		/*  IOCFC config   */
+	struct bfa_iocfc_intr_attr_s	intr_attr;	/*  interrupt attr */
+};
+
+#define BFA_IOCFC_PATHTOV_MAX	60
+#define BFA_IOCFC_QDEPTH_MAX	2000
+
+#endif /* __BFA_DEFS_IOC_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h b/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h
new file mode 100644
index 000000000000..7cb63ea98f38
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_IPFC_H__
+#define __BFA_DEFS_IPFC_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * FCS ip remote port states
+ */
+enum bfa_iprp_state {
+	BFA_IPRP_UNINIT  = 0,	/*  PORT is not yet initialized */
+	BFA_IPRP_ONLINE  = 1,	/*  process login is complete */
+	BFA_IPRP_OFFLINE = 2,	/*  iprp is offline */
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_iprp_stats_s {
+	u32        offlines;
+	u32        onlines;
+	u32        rscns;
+	u32        plogis;
+	u32        logos;
+	u32        plogi_timeouts;
+	u32        plogi_rejects;
+};
+
+/**
+ * FCS iprp attribute returned in queries
+ */
+struct bfa_iprp_attr_s {
+	enum bfa_iprp_state state;
+};
+
+struct bfa_ipfc_stats_s {
+	u32 arp_sent;
+	u32 arp_recv;
+	u32 arp_reply_sent;
+	u32 arp_reply_recv;
+	u32 farp_sent;
+	u32 farp_recv;
+	u32 farp_reply_sent;
+	u32 farp_reply_recv;
+	u32 farp_reject_sent;
+	u32 farp_reject_recv;
+};
+
+struct bfa_ipfc_attr_s {
+	bfa_boolean_t enabled;
+};
+
+#endif /* __BFA_DEFS_IPFC_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h b/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h
new file mode 100644
index 000000000000..2ec769903d24
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_ITNIM_H__
+#define __BFA_DEFS_ITNIM_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+
+/**
+ * FCS itnim states
+ */
+enum bfa_itnim_state {
+	BFA_ITNIM_OFFLINE 	= 0,	/*  offline */
+	BFA_ITNIM_PRLI_SEND 	= 1,	/*  prli send */
+	BFA_ITNIM_PRLI_SENT 	= 2,	/*  prli sent */
+	BFA_ITNIM_PRLI_RETRY 	= 3,	/*  prli retry */
+	BFA_ITNIM_HCB_ONLINE 	= 4,	/*  online callback */
+	BFA_ITNIM_ONLINE 	= 5,	/*  online */
+	BFA_ITNIM_HCB_OFFLINE 	= 6,	/*  offline callback */
+	BFA_ITNIM_INITIATIOR 	= 7,	/*  initiator */
+};
+
+struct bfa_itnim_hal_stats_s {
+	u32	onlines;	/*  ITN nexus onlines (PRLI done) */
+	u32	offlines;	/*  ITN Nexus offlines 	*/
+	u32	creates;	/*  ITN create requests 	*/
+	u32	deletes;	/*  ITN delete requests 	*/
+	u32	create_comps;	/*  ITN create completions 	*/
+	u32	delete_comps;	/*  ITN delete completions 	*/
+	u32	sler_events;	/*  SLER (sequence level error
+					 * recovery) events */
+	u32	ioc_disabled;	/*  Num IOC disables		*/
+	u32	cleanup_comps;	/*  ITN cleanup completions */
+	u32	tm_cmnds;	/*  task management(TM) cmnds sent */
+	u32	tm_fw_rsps;	/*  TM cmds firmware responses */
+	u32	tm_success;	/*  TM successes */
+	u32	tm_failures;	/*  TM failures */
+	u32	tm_io_comps;	/*  TM IO completions */
+	u32	tm_qresumes;	/*  TM queue resumes (after waiting
+					 * for resources)
+					 */
+	u32	tm_iocdowns;	/*  TM cmnds affected by IOC down */
+	u32	tm_cleanups;	/*  TM cleanups */
+	u32	tm_cleanup_comps;
+					/*  TM cleanup completions */
+	u32	ios;		/*  IO requests */
+	u32	io_comps;	/*  IO completions */
+	u64	input_reqs;	/*  INPUT requests */
+	u64	output_reqs;	/*  OUTPUT requests */
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_itnim_stats_s {
+	u32        onlines;	/*  num rport online */
+	u32        offlines;	/*  num rport offline */
+	u32        prli_sent;	/*  num prli sent out */
+	u32        fcxp_alloc_wait;/*  num fcxp alloc waits */
+	u32        prli_rsp_err;	/*  num prli rsp errors */
+	u32        prli_rsp_acc;	/*  num prli rsp accepts */
+	u32        initiator;	/*  rport is an initiator */
+	u32        prli_rsp_parse_err;	/*  prli rsp parsing errors */
+	u32        prli_rsp_rjt;	/*  num prli rsp rejects */
+	u32        timeout;	/*  num timeouts detected */
+	u32        sler;		/*  num sler notification from BFA */
+	u32	rsvd;
+	struct bfa_itnim_hal_stats_s	hal_stats;
+};
+
+/**
+ * FCS itnim attributes returned in queries
+ */
+struct bfa_itnim_attr_s {
+	enum bfa_itnim_state state; /*  FCS itnim state        */
+	u8 retry;		/*  data retransmision support */
+	u8	task_retry_id;  /*  task retry ident support   */
+	u8 rec_support;    /*  REC supported              */
+	u8 conf_comp;      /*  confirmed completion supp  */
+};
+
+/**
+ * BFA ITNIM events.
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_ITNIM_AEN_NEW:       [in]: None  [out]: vf_id, lpwwn
+ * BFA_ITNIM_AEN_DELETE:    [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ *				  [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_ONLINE:    [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ *				  [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_OFFLINE:   [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ *				  [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_DISCONNECT:[in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ *				  [out]: vf_id, ppwwn, lpwwn, rpwwn
+ */
+enum bfa_itnim_aen_event {
+	BFA_ITNIM_AEN_ONLINE 	= 1,	/*  Target online */
+	BFA_ITNIM_AEN_OFFLINE 	= 2,	/*  Target offline */
+	BFA_ITNIM_AEN_DISCONNECT = 3,	/*  Target disconnected */
+};
+
+/**
+ * BFA ITNIM event data structure.
+ */
+struct bfa_itnim_aen_data_s {
+	u16        vf_id;	/*  vf_id of the IT nexus */
+	u16        rsvd[3];
+	wwn_t           ppwwn;	/*  WWN of its physical port */
+	wwn_t           lpwwn;	/*  WWN of logical port */
+	wwn_t           rpwwn;	/*  WWN of remote(target) port */
+};
+
+#endif /* __BFA_DEFS_ITNIM_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_led.h b/drivers/scsi/bfa/include/defs/bfa_defs_led.h
new file mode 100644
index 000000000000..62039273264e
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_led.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_LED_H__
+#define __BFA_DEFS_LED_H__
+
+#define	BFA_LED_MAX_NUM		3
+
+enum bfa_led_op {
+	BFA_LED_OFF   = 0,
+	BFA_LED_ON    = 1,
+	BFA_LED_FLICK = 2,
+	BFA_LED_BLINK = 3,
+};
+
+enum bfa_led_color {
+	BFA_LED_GREEN = 0,
+	BFA_LED_AMBER = 1,
+};
+
+#endif /* __BFA_DEFS_LED_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_lport.h b/drivers/scsi/bfa/include/defs/bfa_defs_lport.h
new file mode 100644
index 000000000000..7359f82aacfc
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_lport.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_LPORT_H__
+#define __BFA_DEFS_LPORT_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_port.h>
+
+/**
+ * BFA AEN logical port events.
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_LPORT_AEN_NEW:       [in]: None         [out]: vf_id, ppwwn, lpwwn, roles
+ * BFA_LPORT_AEN_DELETE:    [in]: lpwwn        [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_ONLINE:    [in]: lpwwn        [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_OFFLINE:   [in]: lpwwn        [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DISCONNECT:[in]: lpwwn        [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NEW_PROP:  [in]: None         [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DELETE_PROP:     [in]: lpwwn  [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NEW_STANDARD:    [in]: None   [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DELETE_STANDARD: [in]: lpwwn  [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_DUP_WWN:    [in]: lpwwn  [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_FABRIC_MAX: [in]: lpwwn  [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_UNKNOWN:    [in]: lpwwn  [out]: vf_id, ppwwn. lpwwn, roles
+ */
+enum bfa_lport_aen_event {
+	BFA_LPORT_AEN_NEW	= 1,	/*  LPort created event */
+	BFA_LPORT_AEN_DELETE	= 2,	/*  LPort deleted event */
+	BFA_LPORT_AEN_ONLINE	= 3,	/*  LPort online event */
+	BFA_LPORT_AEN_OFFLINE	= 4,	/*  LPort offline event */
+	BFA_LPORT_AEN_DISCONNECT = 5,	/*  LPort disconnect event */
+	BFA_LPORT_AEN_NEW_PROP	= 6,	/*  VPort created event */
+	BFA_LPORT_AEN_DELETE_PROP = 7,	/*  VPort deleted event */
+	BFA_LPORT_AEN_NEW_STANDARD = 8,	/*  VPort created event */
+	BFA_LPORT_AEN_DELETE_STANDARD = 9,  /*  VPort deleted event */
+	BFA_LPORT_AEN_NPIV_DUP_WWN = 10,    /*  VPort configured with
+					     *   duplicate WWN event
+						 */
+	BFA_LPORT_AEN_NPIV_FABRIC_MAX = 11, /*  Max NPIV in fabric/fport */
+	BFA_LPORT_AEN_NPIV_UNKNOWN = 12, /*  Unknown NPIV Error code event */
+};
+
+/**
+ * BFA AEN event data structure
+ */
+struct bfa_lport_aen_data_s {
+	u16        vf_id;	/*  vf_id of this logical port */
+	u16        rsvd;
+	enum bfa_port_role roles;	/*  Logical port mode,IM/TM/IP etc */
+	wwn_t           ppwwn;	/*  WWN of its physical port */
+	wwn_t           lpwwn;	/*  WWN of this logical port */
+};
+
+#endif /* __BFA_DEFS_LPORT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h b/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h
new file mode 100644
index 000000000000..13fd4ab6aae2
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_MFG_H__
+#define __BFA_DEFS_MFG_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * Manufacturing block version
+ */
+#define BFA_MFG_VERSION				1
+
+/**
+ * Manufacturing block format
+ */
+#define BFA_MFG_SERIALNUM_SIZE			11
+#define BFA_MFG_PARTNUM_SIZE			14
+#define BFA_MFG_SUPPLIER_ID_SIZE		10
+#define BFA_MFG_SUPPLIER_PARTNUM_SIZE	20
+#define BFA_MFG_SUPPLIER_SERIALNUM_SIZE	20
+#define BFA_MFG_SUPPLIER_REVISION_SIZE	4
+#define STRSZ(_n)	(((_n) + 4) & ~3)
+
+/**
+ * VPD data length
+ */
+#define BFA_MFG_VPD_LEN     256
+
+/**
+ * All numerical fields are in big-endian format.
+ */
+struct bfa_mfg_vpd_s {
+    u8     version;    /*  vpd data version */
+    u8     vpd_sig[3]; /*  characters 'V', 'P', 'D' */
+    u8     chksum;     /*  u8 checksum */
+    u8     vendor;     /*  vendor */
+    u8     len;        /*  vpd data length excluding header */
+    u8     rsv;
+    u8     data[BFA_MFG_VPD_LEN];  /*  vpd data */
+};
+
+#pragma pack(1)
+
+#endif /* __BFA_DEFS_MFG_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pci.h b/drivers/scsi/bfa/include/defs/bfa_defs_pci.h
new file mode 100644
index 000000000000..c9b83321694b
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_pci.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PCI_H__
+#define __BFA_DEFS_PCI_H__
+
+/**
+ * PCI device and vendor ID information
+ */
+enum {
+	BFA_PCI_VENDOR_ID_BROCADE	= 0x1657,
+	BFA_PCI_DEVICE_ID_FC_8G2P	= 0x13,
+	BFA_PCI_DEVICE_ID_FC_8G1P	= 0x17,
+	BFA_PCI_DEVICE_ID_CT		= 0x14,
+};
+
+/**
+ * PCI sub-system device and vendor ID information
+ */
+enum {
+	BFA_PCI_FCOE_SSDEVICE_ID	= 0x14,
+};
+
+#define BFA_PCI_ACCESS_RANGES 1	/* Maximum number of device address ranges
+				 * mapped through different BAR(s). */
+
+#endif /* __BFA_DEFS_PCI_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pm.h b/drivers/scsi/bfa/include/defs/bfa_defs_pm.h
new file mode 100644
index 000000000000..e8d6d959006e
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_pm.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PM_H__
+#define __BFA_DEFS_PM_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * BFA power management device states
+ */
+enum bfa_pm_ds {
+	BFA_PM_DS_D0 = 0,	/*  full power mode */
+	BFA_PM_DS_D1 = 1,	/*  power save state 1 */
+	BFA_PM_DS_D2 = 2,	/*  power save state 2 */
+	BFA_PM_DS_D3 = 3,	/*  power off state */
+};
+
+#endif /* __BFA_DEFS_PM_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pom.h b/drivers/scsi/bfa/include/defs/bfa_defs_pom.h
new file mode 100644
index 000000000000..d9fa278472b7
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_pom.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_POM_H__
+#define __BFA_DEFS_POM_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * POM health status levels for each attributes.
+ */
+enum bfa_pom_entry_health {
+	BFA_POM_HEALTH_NOINFO  = 1,	/*  no information */
+	BFA_POM_HEALTH_NORMAL  = 2,	/*  health is normal */
+	BFA_POM_HEALTH_WARNING = 3,	/*  warning level */
+	BFA_POM_HEALTH_ALARM   = 4,	/*  alarming level */
+};
+
+/**
+ * Reading of temperature/voltage/current/power
+ */
+struct bfa_pom_entry_s {
+	enum bfa_pom_entry_health health;	/*  POM entry health */
+	u32        curr_value;	/*  current value */
+	u32        thr_warn_high;	/*  threshold warning high */
+	u32        thr_warn_low;	/*  threshold warning low */
+	u32        thr_alarm_low;	/*  threshold alaram low */
+	u32        thr_alarm_high;	/*  threshold alarm high */
+};
+
+/**
+ * POM attributes
+ */
+struct bfa_pom_attr_s {
+	struct bfa_pom_entry_s temperature;	/*  centigrade */
+	struct bfa_pom_entry_s voltage;	/*  volts */
+	struct bfa_pom_entry_s curr;	/*  milli amps */
+	struct bfa_pom_entry_s txpower;	/*  micro watts */
+	struct bfa_pom_entry_s rxpower;	/*  micro watts */
+};
+
+#endif /* __BFA_DEFS_POM_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_port.h b/drivers/scsi/bfa/include/defs/bfa_defs_port.h
new file mode 100644
index 000000000000..de0696c81bc4
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_port.h
@@ -0,0 +1,245 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PORT_H__
+#define __BFA_DEFS_PORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_ioc.h>
+
+#define BFA_FCS_FABRIC_IPADDR_SZ  16
+
+/**
+ * symbolic names for base port/virtual port
+ */
+#define BFA_SYMNAME_MAXLEN	128	/* vmware/windows uses 128 bytes */
+struct bfa_port_symname_s {
+	char            symname[BFA_SYMNAME_MAXLEN];
+};
+
+/**
+* Roles of FCS port:
+ *     - FCP IM and FCP TM roles cannot be enabled together for a FCS port
+ *     - Create multiple ports if both IM and TM functions required.
+ *     - Atleast one role must be specified.
+ */
+enum bfa_port_role {
+	BFA_PORT_ROLE_FCP_IM 	= 0x01,	/*  FCP initiator role */
+	BFA_PORT_ROLE_FCP_TM 	= 0x02,	/*  FCP target role */
+	BFA_PORT_ROLE_FCP_IPFC 	= 0x04,	/*  IP over FC role */
+	BFA_PORT_ROLE_FCP_MAX 	= BFA_PORT_ROLE_FCP_IPFC | BFA_PORT_ROLE_FCP_IM
+};
+
+/**
+ * FCS port configuration.
+ */
+struct bfa_port_cfg_s {
+    wwn_t               pwwn;       /*  port wwn */
+    wwn_t               nwwn;       /*  node wwn */
+    struct bfa_port_symname_s  sym_name;   /*  vm port symbolic name */
+    enum bfa_port_role     roles;      /*  FCS port roles */
+	u32			rsvd;
+    u8             tag[16];	/*  opaque tag from application */
+};
+
+/**
+ * FCS port states
+ */
+enum bfa_port_state {
+	BFA_PORT_UNINIT  = 0,	/*  PORT is not yet initialized */
+	BFA_PORT_FDISC   = 1,	/*  FDISC is in progress */
+	BFA_PORT_ONLINE  = 2,	/*  login to fabric is complete */
+	BFA_PORT_OFFLINE = 3,	/*  No login to fabric */
+};
+
+/**
+ * FCS port type. Required for VmWare.
+ */
+enum bfa_port_type {
+	BFA_PORT_TYPE_PHYSICAL = 0,
+	BFA_PORT_TYPE_VIRTUAL,
+};
+
+/**
+ * FCS port offline reason. Required for VmWare.
+ */
+enum bfa_port_offline_reason {
+	BFA_PORT_OFFLINE_UNKNOWN = 0,
+	BFA_PORT_OFFLINE_LINKDOWN,
+	BFA_PORT_OFFLINE_FAB_UNSUPPORTED,	/*  NPIV not supported by the
+						 *    fabric */
+	BFA_PORT_OFFLINE_FAB_NORESOURCES,
+	BFA_PORT_OFFLINE_FAB_LOGOUT,
+};
+
+/**
+ * FCS lport info. Required for VmWare.
+ */
+struct bfa_port_info_s {
+	u8         port_type;	/* bfa_port_type_t : physical or
+					 * virtual */
+	u8         port_state;	/* one of bfa_port_state values */
+	u8         offline_reason;	/* one of bfa_port_offline_reason_t
+					 * values */
+	wwn_t           port_wwn;
+	wwn_t           node_wwn;
+
+	/*
+	 * following 4 feilds are valid for Physical Ports only
+	 */
+	u32        max_vports_supp;	/* Max supported vports */
+	u32        num_vports_inuse;	/* Num of in use vports */
+	u32        max_rports_supp;	/* Max supported rports */
+	u32        num_rports_inuse;	/* Num of doscovered rports */
+
+};
+
+/**
+ * FCS port statistics
+ */
+struct bfa_port_stats_s {
+	u32        ns_plogi_sent;
+	u32        ns_plogi_rsp_err;
+	u32        ns_plogi_acc_err;
+	u32        ns_plogi_accepts;
+	u32        ns_rejects;	/* NS command rejects */
+	u32        ns_plogi_unknown_rsp;
+	u32        ns_plogi_alloc_wait;
+
+	u32        ns_retries;	/* NS command retries */
+	u32        ns_timeouts;	/* NS command timeouts */
+
+	u32        ns_rspnid_sent;
+	u32        ns_rspnid_accepts;
+	u32        ns_rspnid_rsp_err;
+	u32        ns_rspnid_rejects;
+	u32        ns_rspnid_alloc_wait;
+
+	u32        ns_rftid_sent;
+	u32        ns_rftid_accepts;
+	u32        ns_rftid_rsp_err;
+	u32        ns_rftid_rejects;
+	u32        ns_rftid_alloc_wait;
+
+	u32	ns_rffid_sent;
+	u32	ns_rffid_accepts;
+	u32	ns_rffid_rsp_err;
+	u32	ns_rffid_rejects;
+	u32	ns_rffid_alloc_wait;
+
+	u32        ns_gidft_sent;
+	u32        ns_gidft_accepts;
+	u32        ns_gidft_rsp_err;
+	u32        ns_gidft_rejects;
+	u32        ns_gidft_unknown_rsp;
+	u32        ns_gidft_alloc_wait;
+
+	/*
+	 * Mgmt Server stats
+	 */
+	u32        ms_retries;	/* MS command retries */
+	u32        ms_timeouts;	/* MS command timeouts */
+	u32        ms_plogi_sent;
+	u32        ms_plogi_rsp_err;
+	u32        ms_plogi_acc_err;
+	u32        ms_plogi_accepts;
+	u32        ms_rejects;	/* NS command rejects */
+	u32        ms_plogi_unknown_rsp;
+	u32        ms_plogi_alloc_wait;
+
+	u32        num_rscn;	/* Num of RSCN received */
+	u32        num_portid_rscn;/* Num portid format RSCN
+								* received */
+
+	u32	uf_recvs; 	/* unsolicited recv frames      */
+	u32	uf_recv_drops; 	/* dropped received frames	*/
+
+	u32	rsvd; 		/* padding for 64 bit alignment */
+};
+
+/**
+ * BFA port attribute returned in queries
+ */
+struct bfa_port_attr_s {
+	enum bfa_port_state state;		/*  port state */
+	u32         pid;		/*  port ID */
+	struct bfa_port_cfg_s   port_cfg;	/*  port configuration */
+	enum bfa_pport_type port_type;	/*  current topology */
+	u32         loopback;	/*  cable is externally looped back */
+	wwn_t		fabric_name; /*  attached switch's nwwn */
+	u8		fabric_ip_addr[BFA_FCS_FABRIC_IPADDR_SZ]; /*  attached
+							* fabric's ip addr */
+};
+
+/**
+ * BFA physical port Level events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ONLINE:     [in]: pwwn	[out]: pwwn
+ * BFA_PORT_AEN_OFFLINE:    [in]: pwwn	[out]: pwwn
+ * BFA_PORT_AEN_RLIR:       [in]: None	[out]: pwwn, rlir_data, rlir_len
+ * BFA_PORT_AEN_SFP_INSERT: [in]: pwwn	[out]: port_id, pwwn
+ * BFA_PORT_AEN_SFP_REMOVE: [in]: pwwn	[out]: port_id, pwwn
+ * BFA_PORT_AEN_SFP_POM:    [in]: pwwn	[out]: level, port_id, pwwn
+ * BFA_PORT_AEN_ENABLE:     [in]: pwwn	[out]: pwwn
+ * BFA_PORT_AEN_DISABLE:    [in]: pwwn	[out]: pwwn
+ * BFA_PORT_AEN_AUTH_ON:    [in]: pwwn	[out]: pwwn
+ * BFA_PORT_AEN_AUTH_OFF:   [in]: pwwn	[out]: pwwn
+ * BFA_PORT_AEN_DISCONNECT: [in]: pwwn	[out]: pwwn
+ * BFA_PORT_AEN_QOS_NEG:    [in]: pwwn	[out]: pwwn
+ * BFA_PORT_AEN_FABRIC_NAME_CHANGE: [in]: pwwn, [out]: pwwn, fwwn
+ *
+ */
+enum bfa_port_aen_event {
+	BFA_PORT_AEN_ONLINE     = 1,	/*  Physical Port online event */
+	BFA_PORT_AEN_OFFLINE    = 2,	/*  Physical Port offline event */
+	BFA_PORT_AEN_RLIR       = 3,	/*  RLIR event, not supported */
+	BFA_PORT_AEN_SFP_INSERT = 4,	/*  SFP inserted event */
+	BFA_PORT_AEN_SFP_REMOVE = 5,	/*  SFP removed event */
+	BFA_PORT_AEN_SFP_POM    = 6,	/*  SFP POM event */
+	BFA_PORT_AEN_ENABLE     = 7,	/*  Physical Port enable event */
+	BFA_PORT_AEN_DISABLE    = 8,	/*  Physical Port disable event */
+	BFA_PORT_AEN_AUTH_ON    = 9,	/*  Physical Port auth success event */
+	BFA_PORT_AEN_AUTH_OFF   = 10,	/*  Physical Port auth fail event */
+	BFA_PORT_AEN_DISCONNECT = 11,	/*  Physical Port disconnect event */
+	BFA_PORT_AEN_QOS_NEG    = 12,  	/*  Base Port QOS negotiation event */
+	BFA_PORT_AEN_FABRIC_NAME_CHANGE = 13, /*  Fabric Name/WWN change
+					       * event */
+	BFA_PORT_AEN_SFP_ACCESS_ERROR = 14, /*  SFP read error event */
+	BFA_PORT_AEN_SFP_UNSUPPORT = 15, /*  Unsupported SFP event */
+};
+
+enum bfa_port_aen_sfp_pom {
+	BFA_PORT_AEN_SFP_POM_GREEN = 1,	/*  Normal */
+	BFA_PORT_AEN_SFP_POM_AMBER = 2,	/*  Warning */
+	BFA_PORT_AEN_SFP_POM_RED   = 3,	/*  Critical */
+	BFA_PORT_AEN_SFP_POM_MAX   = BFA_PORT_AEN_SFP_POM_RED
+};
+
+struct bfa_port_aen_data_s {
+	enum bfa_ioc_type_e ioc_type;
+	wwn_t           pwwn;	      /*  WWN of the physical port */
+	wwn_t           fwwn;	      /*  WWN of the fabric port */
+	mac_t           mac;	      /*  MAC addres of the ethernet port,
+				       * applicable to CNA port only */
+	int             phy_port_num; /*! For SFP related events */
+	enum bfa_port_aen_sfp_pom level; /*  Only transitions will
+					  * be informed */
+};
+
+#endif /* __BFA_DEFS_PORT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
new file mode 100644
index 000000000000..a000bc4e2d4a
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
@@ -0,0 +1,383 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PPORT_H__
+#define __BFA_DEFS_PPORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/fc.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_qos.h>
+#include <cna/pstats/phyport_defs.h>
+
+/* Modify char* port_stt[] in bfal_port.c if a new state was added */
+enum bfa_pport_states {
+	BFA_PPORT_ST_UNINIT 		= 1,
+	BFA_PPORT_ST_ENABLING_QWAIT 	= 2,
+	BFA_PPORT_ST_ENABLING 		= 3,
+	BFA_PPORT_ST_LINKDOWN 		= 4,
+	BFA_PPORT_ST_LINKUP 		= 5,
+	BFA_PPORT_ST_DISABLING_QWAIT 	= 6,
+	BFA_PPORT_ST_DISABLING		= 7,
+	BFA_PPORT_ST_DISABLED 		= 8,
+	BFA_PPORT_ST_STOPPED 		= 9,
+	BFA_PPORT_ST_IOCDOWN 		= 10,
+	BFA_PPORT_ST_IOCDIS 		= 11,
+	BFA_PPORT_ST_FWMISMATCH		= 12,
+	BFA_PPORT_ST_MAX_STATE,
+};
+
+/**
+ * 	Port speed settings. Each specific speed is a bit field. Use multiple
+ *      bits to specify speeds to be selected for auto-negotiation.
+ */
+enum bfa_pport_speed {
+	BFA_PPORT_SPEED_UNKNOWN = 0,
+	BFA_PPORT_SPEED_1GBPS 	= 1,
+	BFA_PPORT_SPEED_2GBPS 	= 2,
+	BFA_PPORT_SPEED_4GBPS 	= 4,
+	BFA_PPORT_SPEED_8GBPS 	= 8,
+	BFA_PPORT_SPEED_10GBPS 	= 10,
+	BFA_PPORT_SPEED_AUTO =
+		(BFA_PPORT_SPEED_1GBPS | BFA_PPORT_SPEED_2GBPS |
+		 BFA_PPORT_SPEED_4GBPS | BFA_PPORT_SPEED_8GBPS),
+};
+
+/**
+ * 		Port operational type (in sync with SNIA port type).
+ */
+enum bfa_pport_type {
+	BFA_PPORT_TYPE_UNKNOWN = 1,	/*  port type is unkown */
+	BFA_PPORT_TYPE_TRUNKED = 2,	/*  Trunked mode */
+	BFA_PPORT_TYPE_NPORT   = 5,	/*  P2P with switched fabric */
+	BFA_PPORT_TYPE_NLPORT  = 6,	/*  public loop */
+	BFA_PPORT_TYPE_LPORT   = 20,	/*  private loop */
+	BFA_PPORT_TYPE_P2P     = 21,	/*  P2P with no switched fabric */
+	BFA_PPORT_TYPE_VPORT   = 22,	/*  NPIV - virtual port */
+};
+
+/**
+ * 		Port topology setting. A port's topology and fabric login status
+ * 		determine its operational type.
+ */
+enum bfa_pport_topology {
+	BFA_PPORT_TOPOLOGY_NONE = 0,	/*  No valid topology */
+	BFA_PPORT_TOPOLOGY_P2P  = 1,	/*  P2P only */
+	BFA_PPORT_TOPOLOGY_LOOP = 2,	/*  LOOP topology */
+	BFA_PPORT_TOPOLOGY_AUTO = 3,	/*  auto topology selection */
+};
+
+/**
+ * 		Physical port loopback types.
+ */
+enum bfa_pport_opmode {
+	BFA_PPORT_OPMODE_NORMAL   = 0x00, /*  normal non-loopback mode */
+	BFA_PPORT_OPMODE_LB_INT   = 0x01, /*  internal loop back */
+	BFA_PPORT_OPMODE_LB_SLW   = 0x02, /*  serial link wrapback (serdes) */
+	BFA_PPORT_OPMODE_LB_EXT   = 0x04, /*  external loop back (serdes) */
+	BFA_PPORT_OPMODE_LB_CBL   = 0x08, /*  cabled loop back */
+	BFA_PPORT_OPMODE_LB_NLINT = 0x20, /*  NL_Port internal loopback */
+};
+
+#define BFA_PPORT_OPMODE_LB_HARD(_mode)			\
+	((_mode == BFA_PPORT_OPMODE_LB_INT) ||		\
+     (_mode == BFA_PPORT_OPMODE_LB_SLW) ||		\
+     (_mode == BFA_PPORT_OPMODE_LB_EXT))
+
+/**
+		Port State (in sync with SNIA port state).
+ */
+enum bfa_pport_snia_state {
+	BFA_PPORT_STATE_UNKNOWN  = 1,	/*  port is not initialized */
+	BFA_PPORT_STATE_ONLINE   = 2,	/*  port is ONLINE */
+	BFA_PPORT_STATE_DISABLED = 3,	/*  port is disabled by user */
+	BFA_PPORT_STATE_BYPASSED = 4,	/*  port is bypassed (in LOOP) */
+	BFA_PPORT_STATE_DIAG     = 5,	/*  port diagnostics is active */
+	BFA_PPORT_STATE_LINKDOWN = 6,	/*  link is down */
+	BFA_PPORT_STATE_LOOPBACK = 8,	/*  port is looped back */
+};
+
+/**
+ * 		Port link state
+ */
+enum bfa_pport_linkstate {
+	BFA_PPORT_LINKUP 	 = 1,	/*  Physical port/Trunk link up */
+	BFA_PPORT_LINKDOWN 	 = 2,	/*  Physical port/Trunk link down */
+	BFA_PPORT_TRUNK_LINKDOWN = 3,	/*  Trunk link down (new tmaster) */
+};
+
+/**
+ * 		Port link state event
+ */
+#define bfa_pport_event_t enum bfa_pport_linkstate
+
+/**
+ * 		Port link state reason code
+ */
+enum bfa_pport_linkstate_rsn {
+	BFA_PPORT_LINKSTATE_RSN_NONE		= 0,
+	BFA_PPORT_LINKSTATE_RSN_DISABLED 	= 1,
+	BFA_PPORT_LINKSTATE_RSN_RX_NOS 		= 2,
+	BFA_PPORT_LINKSTATE_RSN_RX_OLS 		= 3,
+	BFA_PPORT_LINKSTATE_RSN_RX_LIP 		= 4,
+	BFA_PPORT_LINKSTATE_RSN_RX_LIPF7 	= 5,
+	BFA_PPORT_LINKSTATE_RSN_SFP_REMOVED 	= 6,
+	BFA_PPORT_LINKSTATE_RSN_PORT_FAULT 	= 7,
+	BFA_PPORT_LINKSTATE_RSN_RX_LOS 		= 8,
+	BFA_PPORT_LINKSTATE_RSN_LOCAL_FAULT 	= 9,
+	BFA_PPORT_LINKSTATE_RSN_REMOTE_FAULT 	= 10,
+	BFA_PPORT_LINKSTATE_RSN_TIMEOUT 	= 11,
+
+
+
+	/* CEE related reason codes/errors */
+	CEE_LLDP_INFO_AGED_OUT       = 20,
+	CEE_LLDP_SHUTDOWN_TLV_RCVD   = 21,
+	CEE_PEER_NOT_ADVERTISE_DCBX  = 22,
+	CEE_PEER_NOT_ADVERTISE_PG    = 23,
+	CEE_PEER_NOT_ADVERTISE_PFC   = 24,
+	CEE_PEER_NOT_ADVERTISE_FCOE  = 25,
+	CEE_PG_NOT_COMPATIBLE        = 26,
+	CEE_PFC_NOT_COMPATIBLE       = 27,
+	CEE_FCOE_NOT_COMPATIBLE      = 28,
+	CEE_BAD_PG_RCVD              = 29,
+	CEE_BAD_BW_RCVD              = 30,
+	CEE_BAD_PFC_RCVD             = 31,
+	CEE_BAD_FCOE_PRI_RCVD        = 32,
+	CEE_FCOE_PRI_PFC_OFF         = 33,
+	CEE_DUP_CONTROL_TLV_RCVD     = 34,
+	CEE_DUP_FEAT_TLV_RCVD        = 35,
+	CEE_APPLY_NEW_CFG            = 36,	/* reason, not an error */
+	CEE_PROTOCOL_INIT            = 37,  /* reason, not an error */
+	CEE_PHY_LINK_DOWN            = 38,
+	CEE_LLS_FCOE_ABSENT          = 39,
+	CEE_LLS_FCOE_DOWN            = 40
+};
+
+/**
+ *      Default Target Rate Limiting Speed.
+ */
+#define BFA_PPORT_DEF_TRL_SPEED  BFA_PPORT_SPEED_1GBPS
+
+/**
+ *      Physical port configuration
+ */
+struct bfa_pport_cfg_s {
+	u8         topology;	/*  bfa_pport_topology		*/
+	u8         speed;		/*  enum bfa_pport_speed	*/
+	u8         trunked;	/*  trunked or not		*/
+	u8         qos_enabled;	/*  qos enabled or not		*/
+	u8         trunk_ports;	/*  bitmap of trunked ports	*/
+	u8         cfg_hardalpa;	/*  is hard alpa configured	*/
+	u16        maxfrsize;	/*  maximum frame size		*/
+	u8         hardalpa;	/*  configured hard alpa	*/
+	u8         rx_bbcredit;	/*  receive buffer credits	*/
+	u8         tx_bbcredit;	/*  transmit buffer credits	*/
+	u8         ratelimit;	/*  ratelimit enabled or not	*/
+	u8         trl_def_speed;	/*  ratelimit default speed	*/
+	u8		rsvd[3];
+	u16   	path_tov;	/*  device path timeout	*/
+	u16   	q_depth;	/*  SCSI Queue depth		*/
+};
+
+/**
+ * 		Port attribute values.
+ */
+struct bfa_pport_attr_s {
+	/*
+	 * Static fields
+	 */
+	wwn_t           nwwn;		/*  node wwn */
+	wwn_t           pwwn;		/*  port wwn */
+	enum fc_cos     cos_supported;	/*  supported class of services */
+	u32        rsvd;
+	struct fc_symname_s    port_symname;	/*  port symbolic name */
+	enum bfa_pport_speed speed_supported; /*  supported speeds */
+	bfa_boolean_t   pbind_enabled;	/*  Will be set if Persistent binding
+					 *   enabled. Relevant only in Windows
+					 */
+
+	/*
+	 * Configured values
+	 */
+	struct bfa_pport_cfg_s pport_cfg;	/*  pport cfg */
+
+	/*
+	 * Dynamic field - info from BFA
+	 */
+	enum bfa_pport_states 	port_state;	/*  current port state */
+	enum bfa_pport_speed 	speed;		/*  current speed */
+	enum bfa_pport_topology 	topology;	/*  current topology */
+	bfa_boolean_t		beacon;		/*  current beacon status */
+	bfa_boolean_t		link_e2e_beacon;/*  set if link beacon on */
+	bfa_boolean_t		plog_enabled;	/*  set if portlog is enabled*/
+
+	/*
+	 * Dynamic field - info from FCS
+	 */
+	u32        	pid;		/*  port ID */
+	enum bfa_pport_type 	port_type;	/*  current topology */
+	u32        	loopback;	/*  external loopback */
+	u32		rsvd1;
+	u32		rsvd2;		/*  padding for 64 bit */
+};
+
+/**
+ * 		FC Port statistics.
+ */
+struct bfa_pport_fc_stats_s {
+	u64        secs_reset;	/*  seconds since stats is reset */
+	u64        tx_frames;	/*  transmitted frames */
+	u64        tx_words;	/*  transmitted words */
+	u64        rx_frames;	/*  received frames */
+	u64        rx_words;	/*  received words */
+	u64        lip_count;	/*  LIPs seen */
+	u64        nos_count;	/*  NOS count */
+	u64        error_frames;	/*  errored frames (sent?) */
+	u64        dropped_frames;	/*  dropped frames */
+	u64        link_failures;	/*  link failure count */
+	u64        loss_of_syncs;	/*  loss of sync count */
+	u64        loss_of_signals;/*  loss of signal count */
+	u64        primseq_errs;	/*  primitive sequence protocol */
+	u64        bad_os_count;	/*  invalid ordered set */
+	u64        err_enc_out;	/*  Encoding error outside frame */
+	u64        invalid_crcs;	/*  frames received with invalid CRC*/
+	u64	undersized_frm; /*  undersized frames */
+	u64	oversized_frm;	/*  oversized frames */
+	u64	bad_eof_frm;	/*  frames with bad EOF */
+	struct bfa_qos_stats_s	qos_stats;	/*  QoS statistics */
+};
+
+/**
+ * 		Eth Port statistics.
+ */
+struct bfa_pport_eth_stats_s {
+	u64	secs_reset;	/*  seconds since stats is reset */
+	u64	frame_64;      /*  both rx and tx counter */
+	u64	frame_65_127;      /* both rx and tx counter */
+	u64	frame_128_255;     /* both rx and tx counter */
+	u64	frame_256_511;     /* both rx and tx counter */
+	u64	frame_512_1023;    /* both rx and tx counter */
+	u64	frame_1024_1518;   /* both rx and tx counter */
+	u64	frame_1519_1522;   /* both rx and tx counter */
+
+	u64	tx_bytes;
+	u64	tx_packets;
+	u64	tx_mcast_packets;
+	u64	tx_bcast_packets;
+	u64	tx_control_frame;
+	u64	tx_drop;
+	u64	tx_jabber;
+	u64	tx_fcs_error;
+	u64	tx_fragments;
+
+	u64	rx_bytes;
+	u64	rx_packets;
+	u64	rx_mcast_packets;
+	u64	rx_bcast_packets;
+	u64	rx_control_frames;
+	u64	rx_unknown_opcode;
+	u64	rx_drop;
+	u64	rx_jabber;
+	u64	rx_fcs_error;
+	u64	rx_alignment_error;
+	u64	rx_frame_length_error;
+	u64	rx_code_error;
+	u64	rx_fragments;
+
+	u64	rx_pause; /* BPC */
+	u64	rx_zero_pause; /*  BPC Pause cancellation */
+	u64	tx_pause;      /* BPC */
+	u64	tx_zero_pause; /*  BPC Pause cancellation */
+	u64	rx_fcoe_pause; /* BPC */
+	u64	rx_fcoe_zero_pause; /*  BPC Pause cancellation */
+	u64	tx_fcoe_pause;      /* BPC */
+	u64	tx_fcoe_zero_pause; /*  BPC Pause cancellation */
+};
+
+/**
+ * 		Port statistics.
+ */
+union bfa_pport_stats_u {
+	struct bfa_pport_fc_stats_s	fc;
+	struct bfa_pport_eth_stats_s 	eth;
+};
+
+/**
+ *              Port FCP mappings.
+ */
+struct bfa_pport_fcpmap_s {
+	char		osdevname[256];
+	u32	bus;
+	u32        target;
+	u32        oslun;
+	u32        fcid;
+	wwn_t           nwwn;
+	wwn_t           pwwn;
+	u64        fcplun;
+	char		luid[256];
+};
+
+/**
+ *              Port RNID info.
+ */
+struct bfa_pport_rnid_s {
+	wwn_t             wwn;
+	u32          unittype;
+	u32          portid;
+	u32          attached_nodes_num;
+	u16          ip_version;
+	u16          udp_port;
+	u8           ipaddr[16];
+	u16          rsvd;
+	u16          topologydiscoveryflags;
+};
+
+/**
+ * 		Link state information
+ */
+struct bfa_pport_link_s {
+	u8         linkstate;	/*  Link state bfa_pport_linkstate */
+	u8         linkstate_rsn;	/*  bfa_pport_linkstate_rsn_t */
+	u8         topology;	/*  P2P/LOOP bfa_pport_topology */
+	u8         speed;		/*  Link speed (1/2/4/8 G) */
+	u32        linkstate_opt;	/*  Linkstate optional data (debug) */
+	u8         trunked;	/*  Trunked or not (1 or 0) */
+	u8         resvd[3];
+	struct bfa_qos_attr_s  qos_attr;   /* QoS Attributes */
+	struct bfa_qos_vc_attr_s qos_vc_attr;  /*  VC info from ELP */
+	union {
+		struct {
+			u8         tmaster;/*  Trunk Master or
+						 *    not (1 or 0) */
+			u8         tlinks;	/*  Trunk links bitmap
+						 *    (linkup) */
+			u8         resv1;	/*  Reserved */
+		} trunk_info;
+
+		struct {
+			u8         myalpa;	   /*  alpa claimed */
+			u8         login_req; /*  Login required or
+						    *    not (1 or 0) */
+			u8         alpabm_val;/*  alpa bitmap valid
+						    *    or not (1 or 0) */
+			struct fc_alpabm_s     alpabm;	   /*  alpa bitmap */
+		} loop_info;
+	} tl;
+};
+
+#endif /* __BFA_DEFS_PPORT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_qos.h b/drivers/scsi/bfa/include/defs/bfa_defs_qos.h
new file mode 100644
index 000000000000..aadbacd1d2d7
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_qos.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_QOS_H__
+#define __BFA_DEFS_QOS_H__
+
+/**
+ * QoS states
+ */
+enum bfa_qos_state {
+	BFA_QOS_ONLINE = 1,		/*  QoS is online */
+	BFA_QOS_OFFLINE = 2,		/*  QoS is offline */
+};
+
+
+/**
+ * QoS  Priority levels.
+ */
+enum bfa_qos_priority {
+	BFA_QOS_UNKNOWN = 0,
+	BFA_QOS_HIGH  = 1,	/*  QoS Priority Level High */
+	BFA_QOS_MED  =  2,	/*  QoS Priority Level Medium */
+	BFA_QOS_LOW  =  3,	/*  QoS Priority Level Low */
+};
+
+
+/**
+ * QoS  bandwidth allocation for each priority level
+ */
+enum bfa_qos_bw_alloc {
+	BFA_QOS_BW_HIGH  = 60,	/*  bandwidth allocation for High */
+	BFA_QOS_BW_MED  =  30,	/*  bandwidth allocation for Medium */
+	BFA_QOS_BW_LOW  =  10,	/*  bandwidth allocation for Low */
+};
+
+/**
+ * QoS attribute returned in QoS Query
+ */
+struct bfa_qos_attr_s {
+	enum bfa_qos_state state;		/*  QoS current state */
+	u32  total_bb_cr;  	 	/*  Total BB Credits */
+};
+
+/**
+ * These fields should be displayed only from the CLI.
+ * There will be a separate BFAL API (get_qos_vc_attr ?)
+ * to retrieve this.
+ *
+ */
+#define  BFA_QOS_MAX_VC  16
+
+struct bfa_qos_vc_info_s {
+	u8 vc_credit;
+	u8 borrow_credit;
+	u8 priority;
+	u8 resvd;
+};
+
+struct bfa_qos_vc_attr_s {
+	u16  total_vc_count;                    /*  Total VC Count */
+	u16  shared_credit;
+	u32  elp_opmode_flags;
+	struct bfa_qos_vc_info_s vc_info[BFA_QOS_MAX_VC];  /*   as many as
+							    * total_vc_count */
+};
+
+/**
+ * QoS statistics
+ */
+struct bfa_qos_stats_s {
+	u32	flogi_sent; 		/*  QoS Flogi sent */
+	u32	flogi_acc_recvd;	/*  QoS Flogi Acc received */
+	u32	flogi_rjt_recvd; /*  QoS Flogi rejects received */
+	u32	flogi_retries;		/*  QoS Flogi retries */
+
+	u32	elp_recvd; 	   	/*  QoS ELP received */
+	u32	elp_accepted;       /*  QoS ELP Accepted */
+	u32	elp_rejected;       /*  QoS ELP rejected */
+	u32	elp_dropped;        /*  QoS ELP dropped  */
+
+	u32	qos_rscn_recvd;     /*  QoS RSCN received */
+	u32	rsvd; 		/* padding for 64 bit alignment */
+};
+
+#endif /* __BFA_DEFS_QOS_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_rport.h b/drivers/scsi/bfa/include/defs/bfa_defs_rport.h
new file mode 100644
index 000000000000..e0af59d6d2f6
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_rport.h
@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_RPORT_H__
+#define __BFA_DEFS_RPORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_qos.h>
+
+/**
+ * FCS remote port states
+ */
+enum bfa_rport_state {
+	BFA_RPORT_UNINIT 	= 0,	/*  PORT is not yet initialized */
+	BFA_RPORT_OFFLINE 	= 1,	/*  rport is offline */
+	BFA_RPORT_PLOGI 	= 2,	/*  PLOGI to rport is in progress */
+	BFA_RPORT_ONLINE 	= 3,	/*  login to rport is complete */
+	BFA_RPORT_PLOGI_RETRY 	= 4,	/*  retrying login to rport */
+	BFA_RPORT_NSQUERY 	= 5,	/*  nameserver query */
+	BFA_RPORT_ADISC 	= 6,	/*  ADISC authentication */
+	BFA_RPORT_LOGO 		= 7,	/*  logging out with rport */
+	BFA_RPORT_LOGORCV 	= 8,	/*  handling LOGO from rport */
+	BFA_RPORT_NSDISC 	= 9,	/*  re-discover rport */
+};
+
+/**
+ *  Rport Scsi Function : Initiator/Target.
+ */
+enum bfa_rport_function {
+	BFA_RPORT_INITIATOR 	= 0x01,	/*  SCSI Initiator	*/
+	BFA_RPORT_TARGET 	= 0x02,	/*  SCSI Target	*/
+};
+
+/**
+ * port/node symbolic names for rport
+ */
+#define BFA_RPORT_SYMNAME_MAXLEN	255
+struct bfa_rport_symname_s {
+	char            symname[BFA_RPORT_SYMNAME_MAXLEN];
+};
+
+struct bfa_rport_hal_stats_s {
+	u32        sm_un_cr;	    /*  uninit: create events      */
+	u32        sm_un_unexp;	    /*  uninit: exception events   */
+	u32        sm_cr_on;	    /*  created: online events     */
+	u32        sm_cr_del;	    /*  created: delete events     */
+	u32        sm_cr_hwf;	    /*  created: IOC down          */
+	u32        sm_cr_unexp;	    /*  created: exception events  */
+	u32        sm_fwc_rsp;	    /*  fw create: f/w responses   */
+	u32        sm_fwc_del;	    /*  fw create: delete events   */
+	u32        sm_fwc_off;	    /*  fw create: offline events  */
+	u32        sm_fwc_hwf;	    /*  fw create: IOC down        */
+	u32        sm_fwc_unexp;	    /*  fw create: exception events*/
+	u32        sm_on_off;	    /*  online: offline events     */
+	u32        sm_on_del;	    /*  online: delete events      */
+	u32        sm_on_hwf;	    /*  online: IOC down events    */
+	u32        sm_on_unexp;	    /*  online: exception events   */
+	u32        sm_fwd_rsp;	    /*  fw delete: fw responses    */
+	u32        sm_fwd_del;	    /*  fw delete: delete events   */
+	u32        sm_fwd_hwf;	    /*  fw delete: IOC down events */
+	u32        sm_fwd_unexp;	    /*  fw delete: exception events*/
+	u32        sm_off_del;	    /*  offline: delete events     */
+	u32        sm_off_on;	    /*  offline: online events     */
+	u32        sm_off_hwf;	    /*  offline: IOC down events   */
+	u32        sm_off_unexp;	    /*  offline: exception events  */
+	u32        sm_del_fwrsp;	    /*  delete: fw responses       */
+	u32        sm_del_hwf;	    /*  delete: IOC down events    */
+	u32        sm_del_unexp;	    /*  delete: exception events   */
+	u32        sm_delp_fwrsp;	    /*  delete pend: fw responses  */
+	u32        sm_delp_hwf;	    /*  delete pend: IOC downs     */
+	u32        sm_delp_unexp;	    /*  delete pend: exceptions    */
+	u32        sm_offp_fwrsp;	    /*  off-pending: fw responses  */
+	u32        sm_offp_del;	    /*  off-pending: deletes       */
+	u32        sm_offp_hwf;	    /*  off-pending: IOC downs     */
+	u32        sm_offp_unexp;	    /*  off-pending: exceptions    */
+	u32        sm_iocd_off;	    /*  IOC down: offline events   */
+	u32        sm_iocd_del;	    /*  IOC down: delete events    */
+	u32        sm_iocd_on;	    /*  IOC down: online events    */
+	u32        sm_iocd_unexp;	    /*  IOC down: exceptions       */
+	u32        rsvd;
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_rport_stats_s {
+	u32        offlines;           /*  remote port offline count  */
+	u32        onlines;            /*  remote port online count   */
+	u32        rscns;              /*  RSCN affecting rport       */
+	u32        plogis;		    /*  plogis sent                */
+	u32        plogi_accs;	    /*  plogi accepts              */
+	u32        plogi_timeouts;	    /*  plogi timeouts             */
+	u32        plogi_rejects;	    /*  rcvd plogi rejects         */
+	u32        plogi_failed;	    /*  local failure              */
+	u32        plogi_rcvd;	    /*  plogis rcvd                */
+	u32        prli_rcvd;          /*  inbound PRLIs              */
+	u32        adisc_rcvd;         /*  ADISCs received            */
+	u32        adisc_rejects;      /*  recvd  ADISC rejects       */
+	u32        adisc_sent;         /*  ADISC requests sent        */
+	u32        adisc_accs;         /*  ADISC accepted by rport    */
+	u32        adisc_failed;       /*  ADISC failed (no response) */
+	u32        adisc_rejected;     /*  ADISC rejected by us    */
+	u32        logos;              /*  logos sent                 */
+	u32        logo_accs;          /*  LOGO accepts from rport    */
+	u32        logo_failed;        /*  LOGO failures              */
+	u32        logo_rejected;      /*  LOGO rejects from rport    */
+	u32        logo_rcvd;          /*  LOGO from remote port      */
+
+	u32        rpsc_rcvd;         /*  RPSC received            */
+	u32        rpsc_rejects;      /*  recvd  RPSC rejects       */
+	u32        rpsc_sent;         /*  RPSC requests sent        */
+	u32        rpsc_accs;         /*  RPSC accepted by rport    */
+	u32        rpsc_failed;       /*  RPSC failed (no response) */
+	u32        rpsc_rejected;     /*  RPSC rejected by us    */
+
+	u32        rsvd;
+	struct bfa_rport_hal_stats_s	hal_stats;  /*  BFA rport stats    */
+};
+
+/**
+ *  Rport's QoS attributes
+ */
+struct bfa_rport_qos_attr_s {
+	enum bfa_qos_priority qos_priority;  /*  rport's QoS priority   */
+	u32	       qos_flow_id;	  /*  QoS flow Id	 */
+};
+
+/**
+ * FCS remote port attributes returned in queries
+ */
+struct bfa_rport_attr_s {
+	wwn_t           	nwwn;	/*  node wwn */
+	wwn_t           	pwwn;	/*  port wwn */
+	enum fc_cos cos_supported;	/*  supported class of services */
+	u32        	pid;	/*  port ID */
+	u32        	df_sz;	/*  Max payload size */
+	enum bfa_rport_state 	state;	/*  Rport State machine state */
+	enum fc_cos        	fc_cos;	/*  FC classes of services */
+	bfa_boolean_t   	cisc;	/*  CISC capable device */
+	struct bfa_rport_symname_s symname; /*  Symbolic Name */
+	enum bfa_rport_function	scsi_function; /*  Initiator/Target */
+	struct bfa_rport_qos_attr_s qos_attr; /*  qos attributes  */
+	enum bfa_pport_speed curr_speed;   /*  operating speed got from
+					    * RPSC ELS. UNKNOWN, if RPSC
+					    * is not supported */
+	bfa_boolean_t 	trl_enforced;	/*  TRL enforced ? TRUE/FALSE */
+	enum bfa_pport_speed	assigned_speed;	/* Speed assigned by the user.
+						 * will be used if RPSC is not
+						 * supported by the rport */
+};
+
+#define bfa_rport_aen_qos_data_t struct bfa_rport_qos_attr_s
+
+/**
+ * BFA remote port events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_RPORT_AEN_ONLINE:    [in]: lpwwn	[out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_OFFLINE:   [in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_DISCONNECT:[in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_QOS_PRIO:  [in]: lpwwn [out]: vf_id, lpwwn, rpwwn, prio
+ * BFA_RPORT_AEN_QOS_FLOWID:[in]: lpwwn [out]: vf_id, lpwwn, rpwwn, flow_id
+ */
+enum bfa_rport_aen_event {
+	BFA_RPORT_AEN_ONLINE      = 1,	/*  RPort online event */
+	BFA_RPORT_AEN_OFFLINE     = 2,	/*  RPort offline event */
+	BFA_RPORT_AEN_DISCONNECT  = 3,	/*  RPort disconnect event */
+	BFA_RPORT_AEN_QOS_PRIO    = 4,	/*  QOS priority change event */
+	BFA_RPORT_AEN_QOS_FLOWID  = 5,	/*  QOS flow Id change event */
+};
+
+struct bfa_rport_aen_data_s {
+	u16        vf_id;	/*  vf_id of this logical port */
+	u16        rsvd[3];
+	wwn_t           ppwwn;	/*  WWN of its physical port */
+	wwn_t           lpwwn;	/*  WWN of this logical port */
+	wwn_t           rpwwn;	/*  WWN of this remote port */
+	union {
+		bfa_rport_aen_qos_data_t qos;
+	} priv;
+};
+
+#endif /* __BFA_DEFS_RPORT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
new file mode 100644
index 000000000000..cdceaeb9f4b8
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
@@ -0,0 +1,255 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_STATUS_H__
+#define __BFA_DEFS_STATUS_H__
+
+/**
+ * API status return values
+ *
+ * NOTE: The error msgs are auto generated from the comments. Only singe line
+ * comments are supported
+ */
+enum bfa_status {
+	BFA_STATUS_OK 		= 0,	/*  Success */
+	BFA_STATUS_FAILED 	= 1,	/*  Operation failed */
+	BFA_STATUS_EINVAL 	= 2,	/*  Invalid params Check input
+					 * parameters */
+	BFA_STATUS_ENOMEM 	= 3,	/*  Out of resources */
+	BFA_STATUS_ENOSYS 	= 4,	/*  Function not implemented */
+	BFA_STATUS_ETIMER 	= 5,	/*  Timer expired - Retry, if
+					 * persists, contact support */
+	BFA_STATUS_EPROTOCOL 	= 6,	/*  Protocol error */
+	BFA_STATUS_ENOFCPORTS 	= 7,	/*  No FC ports resources */
+	BFA_STATUS_NOFLASH 	= 8,	/*  Flash not present */
+	BFA_STATUS_BADFLASH 	= 9,	/*  Flash is corrupted or bad */
+	BFA_STATUS_SFP_UNSUPP 	= 10,	/*  Unsupported SFP - Replace SFP */
+	BFA_STATUS_UNKNOWN_VFID = 11,	/*  VF_ID not found */
+	BFA_STATUS_DATACORRUPTED = 12,	/*  Diag returned data corrupted
+					 * contact support */
+	BFA_STATUS_DEVBUSY 	= 13,	/*  Device busy - Retry operation */
+	BFA_STATUS_ABORTED 	= 14,	/*  Operation aborted */
+	BFA_STATUS_NODEV 	= 15,	/*  Dev is not present */
+	BFA_STATUS_HDMA_FAILED 	= 16,	/*  Host dma failed contact support */
+	BFA_STATUS_FLASH_BAD_LEN = 17,	/*  Flash bad length */
+	BFA_STATUS_UNKNOWN_LWWN = 18,	/*  LPORT PWWN not found */
+	BFA_STATUS_UNKNOWN_RWWN = 19,	/*  RPORT PWWN not found */
+	BFA_STATUS_FCPT_LS_RJT 	= 20,	/*  Got LS_RJT for FC Pass
+					 * through Req */
+	BFA_STATUS_VPORT_EXISTS = 21,	/*  VPORT already exists */
+	BFA_STATUS_VPORT_MAX 	= 22,	/*  Reached max VPORT supported
+					 * limit */
+	BFA_STATUS_UNSUPP_SPEED = 23,	/*  Invalid Speed Check speed
+					 * setting */
+	BFA_STATUS_INVLD_DFSZ 	= 24,	/*  Invalid Max data field size */
+	BFA_STATUS_CNFG_FAILED 	= 25,	/*  Setting can not be persisted */
+	BFA_STATUS_CMD_NOTSUPP 	= 26,	/*  Command/API not supported */
+	BFA_STATUS_NO_ADAPTER 	= 27,	/*  No Brocade Adapter Found */
+	BFA_STATUS_LINKDOWN 	= 28,	/*  Link is down - Check or replace
+					 * SFP/cable */
+	BFA_STATUS_FABRIC_RJT 	= 29,	/*  Reject from attached fabric */
+	BFA_STATUS_UNKNOWN_VWWN = 30,	/*  VPORT PWWN not found */
+	BFA_STATUS_NSLOGIN_FAILED = 31,	/*  Nameserver login failed */
+	BFA_STATUS_NO_RPORTS 	= 32,	/*  No remote ports found */
+	BFA_STATUS_NSQUERY_FAILED = 33,	/*  Nameserver query failed */
+	BFA_STATUS_PORT_OFFLINE = 34,	/*  Port is not online */
+	BFA_STATUS_RPORT_OFFLINE = 35,	/*  RPORT is not online */
+	BFA_STATUS_TGTOPEN_FAILED = 36,	/*  Remote SCSI target open failed */
+	BFA_STATUS_BAD_LUNS 	= 37,	/*  No valid LUNs found */
+	BFA_STATUS_IO_FAILURE 	= 38,	/*  SCSI target IO failure */
+	BFA_STATUS_NO_FABRIC 	= 39,	/*  No switched fabric present */
+	BFA_STATUS_EBADF 	= 40,	/*  Bad file descriptor */
+	BFA_STATUS_EINTR 	= 41,	/*  A signal was caught during ioctl */
+	BFA_STATUS_EIO 		= 42,	/*  I/O error */
+	BFA_STATUS_ENOTTY 	= 43,	/*  Inappropriate I/O control
+					 * operation */
+	BFA_STATUS_ENXIO 	= 44,	/*  No such device or address */
+	BFA_STATUS_EFOPEN 	= 45,	/*  Failed to open file */
+	BFA_STATUS_VPORT_WWN_BP = 46,	/*  WWN is same as base port's WWN */
+	BFA_STATUS_PORT_NOT_DISABLED = 47, /*  Port not disabled disable port
+					    * first */
+	BFA_STATUS_BADFRMHDR 	= 48,	/*  Bad frame header */
+	BFA_STATUS_BADFRMSZ 	= 49,	/*  Bad frame size check and replace
+					 * SFP/cable */
+	BFA_STATUS_MISSINGFRM 	= 50,	/*  Missing frame check and replace
+					 * SFP/cable */
+	BFA_STATUS_LINKTIMEOUT 	= 51,	/*  Link timeout check and replace
+					 * SFP/cable */
+	BFA_STATUS_NO_FCPIM_NEXUS = 52,	/*  No FCP Nexus exists with the
+					 * rport */
+	BFA_STATUS_CHECKSUM_FAIL = 53,	/*  checksum failure */
+	BFA_STATUS_GZME_FAILED 	= 54,	/*  Get zone member query failed */
+	BFA_STATUS_SCSISTART_REQD = 55,	/*  SCSI disk require START command */
+	BFA_STATUS_IOC_FAILURE 	= 56,	/*  IOC failure - Retry, if persists
+					 * contact support */
+	BFA_STATUS_INVALID_WWN 	= 57,	/*  Invalid WWN */
+	BFA_STATUS_MISMATCH 	= 58,	/*  Version mismatch */
+	BFA_STATUS_IOC_ENABLED 	= 59,	/*  IOC is already enabled */
+	BFA_STATUS_ADAPTER_ENABLED = 60, /*  Adapter is not disabled disable
+					  * adapter first */
+	BFA_STATUS_IOC_NON_OP 	= 61,	/*  IOC is not operational. Enable IOC
+					 * and if it still fails,
+					 * contact support */
+	BFA_STATUS_ADDR_MAP_FAILURE = 62, /*  PCI base address not mapped
+					   * in OS */
+	BFA_STATUS_SAME_NAME 	= 63,	/*  Name exists! use a different
+					 * name */
+	BFA_STATUS_PENDING      = 64,   /*  API completes asynchronously */
+	BFA_STATUS_8G_SPD	= 65,	/*  Speed setting not valid for
+					 * 8G HBA */
+	BFA_STATUS_4G_SPD	= 66,	/*  Speed setting not valid for
+					 * 4G HBA */
+	BFA_STATUS_AD_IS_ENABLE = 67,	/*  Adapter is already enabled */
+	BFA_STATUS_EINVAL_TOV 	= 68,	/*  Invalid path failover TOV */
+	BFA_STATUS_EINVAL_QDEPTH = 69,	/*  Invalid queue depth value */
+	BFA_STATUS_VERSION_FAIL = 70,	/*  Application/Driver version
+					 * mismatch */
+	BFA_STATUS_DIAG_BUSY    = 71,	/*  diag busy */
+	BFA_STATUS_BEACON_ON	= 72,	/*  Port Beacon already on */
+	BFA_STATUS_BEACON_OFF	= 73,	/*  Port Beacon already off */
+	BFA_STATUS_LBEACON_ON   = 74,	/*  Link End-to-End Beacon already
+					 * on */
+	BFA_STATUS_LBEACON_OFF	= 75,	/*  Link End-to-End Beacon already
+					 * off */
+	BFA_STATUS_PORT_NOT_INITED = 76, /*  Port not initialized */
+	BFA_STATUS_RPSC_ENABLED = 77, /*  Target has a valid speed */
+	BFA_STATUS_ENOFSAVE = 78,	/*  No saved firmware trace */
+	BFA_STATUS_BAD_FILE = 79,	/*  Not a valid Brocade Boot Code
+					 * file */
+	BFA_STATUS_RLIM_EN = 80,	/*  Target rate limiting is already
+					 * enabled */
+	BFA_STATUS_RLIM_DIS = 81,  /*  Target rate limiting is already
+				    * disabled */
+	BFA_STATUS_IOC_DISABLED = 82,   /*  IOC is already disabled */
+	BFA_STATUS_ADAPTER_DISABLED = 83,   /*  Adapter is already disabled */
+	BFA_STATUS_BIOS_DISABLED = 84,   /*  Bios is already disabled */
+	BFA_STATUS_AUTH_ENABLED = 85,   /*  Authentication is already
+					 * enabled */
+	BFA_STATUS_AUTH_DISABLED = 86,   /*  Authentication is already
+					 * disabled */
+	BFA_STATUS_ERROR_TRL_ENABLED = 87,   /*  Target rate limiting is
+					      * enabled */
+	BFA_STATUS_ERROR_QOS_ENABLED = 88,   /*  QoS is enabled */
+	BFA_STATUS_NO_SFP_DEV = 89, /*  No SFP device check or replace SFP */
+	BFA_STATUS_MEMTEST_FAILED = 90,	/*  Memory test failed contact
+					 * support */
+	BFA_STATUS_INVALID_DEVID = 91,	/*  Invalid device id provided */
+	BFA_STATUS_QOS_ENABLED = 92, /*  QOS is already enabled */
+	BFA_STATUS_QOS_DISABLED = 93, /*  QOS is already disabled */
+	BFA_STATUS_INCORRECT_DRV_CONFIG = 94, /*  Check configuration
+					       * key/value pair */
+	BFA_STATUS_REG_FAIL = 95, /*  Can't read windows registry */
+	BFA_STATUS_IM_INV_CODE = 96, /*  Invalid IOCTL code */
+	BFA_STATUS_IM_INV_VLAN = 97, /*  Invalid VLAN ID */
+	BFA_STATUS_IM_INV_ADAPT_NAME = 98, /*  Invalid adapter name */
+	BFA_STATUS_IM_LOW_RESOURCES = 99, /*  Memory allocation failure in
+					   * driver */
+	BFA_STATUS_IM_VLANID_IS_PVID = 100, /*  Given VLAN id same as PVID */
+	BFA_STATUS_IM_VLANID_EXISTS = 101, /*  Given VLAN id already exists */
+	BFA_STATUS_IM_FW_UPDATE_FAIL = 102, /*  Updating firmware with new
+					     * VLAN ID failed */
+	BFA_STATUS_PORTLOG_ENABLED = 103, /*  Port Log is already enabled */
+	BFA_STATUS_PORTLOG_DISABLED = 104, /*  Port Log is already disabled */
+	BFA_STATUS_FILE_NOT_FOUND = 105, /*  Specified file could not be
+					  * found */
+	BFA_STATUS_QOS_FC_ONLY = 106, /*  QOS can be enabled for FC mode
+				       * only */
+	BFA_STATUS_RLIM_FC_ONLY = 107, /*  RATELIM can be enabled for FC mode
+					* only */
+	BFA_STATUS_CT_SPD = 108, /*  Invalid speed selection for Catapult. */
+	BFA_STATUS_LEDTEST_OP = 109, /*  LED test is operating */
+	BFA_STATUS_CEE_NOT_DN = 110, /*  eth port is not at down state, please
+				      * bring down first */
+	BFA_STATUS_10G_SPD = 111, /*  Speed setting not valid for 10G HBA */
+	BFA_STATUS_IM_INV_TEAM_NAME = 112, /*  Invalid team name */
+	BFA_STATUS_IM_DUP_TEAM_NAME = 113, /*  Given team name already
+					    * exists */
+	BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /*  Given adapter is part
+						    * of another team */
+	BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /*  Adapter has VLANs configured.
+					      * Delete all VLANs before
+					      * creating team */
+	BFA_STATUS_IM_PVID_MISMATCH = 116, /*  Mismatching PVIDs configured
+					    * for adapters */
+	BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /*  Mismatching link speeds
+						  * configured for adapters */
+	BFA_STATUS_IM_MTU_MISMATCH = 118, /*  Mismatching MTUs configured for
+					   * adapters */
+	BFA_STATUS_IM_RSS_MISMATCH = 119, /*  Mismatching RSS parameters
+					   * configured for adapters */
+	BFA_STATUS_IM_HDS_MISMATCH = 120, /*  Mismatching HDS parameters
+					   * configured for adapters */
+	BFA_STATUS_IM_OFFLOAD_MISMATCH = 121, /*  Mismatching offload
+					       * parameters configured for
+					       * adapters */
+	BFA_STATUS_IM_PORT_PARAMS = 122, /*  Error setting port parameters */
+	BFA_STATUS_IM_PORT_NOT_IN_TEAM = 123, /*  Port is not part of team */
+	BFA_STATUS_IM_CANNOT_REM_PRI = 124, /*  Primary adapter cannot be
+					     * removed. Change primary before
+					     * removing */
+	BFA_STATUS_IM_MAX_PORTS_REACHED = 125, /*  Exceeding maximum ports
+						* per team */
+	BFA_STATUS_IM_LAST_PORT_DELETE = 126, /*  Last port in team being
+					       * deleted */
+	BFA_STATUS_IM_NO_DRIVER = 127, /*  IM driver is not installed */
+	BFA_STATUS_IM_MAX_VLANS_REACHED = 128, /*  Exceeding maximum VLANs
+						* per port */
+	BFA_STATUS_TOMCAT_SPD_NOT_ALLOWED = 129, /* Bios speed config not
+						  * allowed for CNA */
+	BFA_STATUS_NO_MINPORT_DRIVER = 130, /*  Miniport driver is not
+					     * loaded */
+	BFA_STATUS_CARD_TYPE_MISMATCH = 131, /*  Card type mismatch */
+	BFA_STATUS_BAD_ASICBLK = 132, /*  Bad ASIC block */
+	BFA_STATUS_NO_DRIVER = 133, /*  Storage/Ethernet driver not loaded */
+	BFA_STATUS_INVALID_MAC = 134, /*  Invalid mac address */
+	BFA_STATUS_IM_NO_VLAN = 135, /*  No VLANs configured on the adapter */
+	BFA_STATUS_IM_ETH_LB_FAILED = 136, /*  Ethernet loopback test failed */
+	BFA_STATUS_IM_PVID_REMOVE = 137, /*  Cannot remove port vlan (PVID) */
+	BFA_STATUS_IM_PVID_EDIT = 138, /*  Cannot edit port vlan (PVID) */
+	BFA_STATUS_CNA_NO_BOOT = 139, /*  Boot upload not allowed for CNA */
+	BFA_STATUS_IM_PVID_NON_ZERO = 140, /*  Port VLAN ID (PVID) is Set to
+					    * Non-Zero Value */
+	BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /*  Acquiring Network
+						  * Subsytem Lock Failed.Please
+						  * try after some time */
+	BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /*  Acquiring Network Subsytem
+						 * handle Failed. Please try
+						 * after some time */
+	BFA_STATUS_IM_NOT_BOUND = 143, /*  Brocade 10G Ethernet Service is not
+					* Enabled on this port */
+	BFA_STATUS_INSUFFICIENT_PERMS = 144, /*  User doesn't have sufficient
+					      * permissions to execute the BCU
+					      * application */
+	BFA_STATUS_IM_INV_VLAN_NAME = 145, /*  Invalid/Reserved Vlan name
+					    * string. The name is not allowed
+					    * for the normal Vlans */
+	BFA_STATUS_CMD_NOTSUPP_CNA = 146, /*  Command not supported for CNA */
+	BFA_STATUS_IM_PASSTHRU_EDIT = 147, /*  Can not edit passthru vlan id */
+	BFA_STATUS_IM_BIND_FAILED = 148, /*! < IM Driver bind operation
+					  * failed */
+	BFA_STATUS_IM_UNBIND_FAILED = 149, /* ! < IM Driver unbind operation
+					    * failed */
+	BFA_STATUS_MAX_VAL		/*  Unknown error code */
+};
+#define bfa_status_t enum bfa_status
+
+enum bfa_eproto_status {
+	BFA_EPROTO_BAD_ACCEPT = 0,
+	BFA_EPROTO_UNKNOWN_RSP = 1
+};
+#define bfa_eproto_status_t enum bfa_eproto_status
+
+#endif /* __BFA_DEFS_STATUS_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_tin.h b/drivers/scsi/bfa/include/defs/bfa_defs_tin.h
new file mode 100644
index 000000000000..e05a2db7abed
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_tin.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_TIN_H__
+#define __BFA_DEFS_TIN_H__
+
+#include <protocol/types.h>
+#include <protocol/fc.h>
+
+/**
+ * FCS tin states
+ */
+enum bfa_tin_state_e {
+	BFA_TIN_SM_OFFLINE = 0,		/*  tin is offline */
+	BFA_TIN_SM_WOS_LOGIN = 1,	/*  Waiting PRLI ACC/RJT from ULP */
+	BFA_TIN_SM_WFW_ONLINE = 2,	/*  Waiting ACK to PRLI ACC from FW */
+	BFA_TIN_SM_ONLINE = 3,		/*  tin login is complete */
+	BFA_TIN_SM_WIO_RELOGIN = 4,	/*  tin relogin is in progress */
+	BFA_TIN_SM_WIO_LOGOUT = 5,	/*  Processing of PRLO req from
+					 *   Initiator is in progress
+					 */
+	BFA_TIN_SM_WOS_LOGOUT = 6,	/*  Processing of PRLO req from
+					 *   Initiator is in progress
+					 */
+	BFA_TIN_SM_WIO_CLEAN = 7,	/*  Waiting for IO cleanup before tin
+					 *   is offline. This can be triggered
+					 *   by RPORT LOGO (rcvd/sent) or by
+					 *   PRLO (rcvd/sent)
+					 */
+};
+
+struct bfa_prli_req_s {
+	struct fchs_s fchs;
+	struct fc_prli_s prli_payload;
+};
+
+struct bfa_prlo_req_s {
+	struct fchs_s fchs;
+	struct fc_prlo_s prlo_payload;
+};
+
+void bfa_tin_send_login_rsp(void *bfa_tin, u32 login_rsp,
+				struct fc_ls_rjt_s rjt_payload);
+void bfa_tin_send_logout_rsp(void *bfa_tin, u32 logout_rsp,
+				struct fc_ls_rjt_s rjt_payload);
+/**
+ * FCS target port statistics
+ */
+struct bfa_tin_stats_s {
+	u32 onlines;	/*  ITN nexus onlines (PRLI done) */
+	u32 offlines;	/*  ITN Nexus offlines 	*/
+	u32 prli_req_parse_err;	/*  prli req parsing errors */
+	u32 prli_rsp_rjt;	/*  num prli rsp rejects sent */
+	u32 prli_rsp_acc;	/*  num prli rsp accepts sent */
+	u32 cleanup_comps;	/*  ITN cleanup completions */
+};
+
+/**
+ * FCS tin attributes returned in queries
+ */
+struct bfa_tin_attr_s {
+	enum bfa_tin_state_e state;
+	u8	seq_retry;    /*  Sequence retry supported      */
+	u8	rsvd[3];
+};
+
+/**
+ * BFA TIN async event data structure for BFAL
+ */
+enum bfa_tin_aen_event {
+	BFA_TIN_AEN_ONLINE 	= 1,	/*  Target online */
+	BFA_TIN_AEN_OFFLINE 	= 2,	/*  Target offline */
+	BFA_TIN_AEN_DISCONNECT	= 3,	/*  Target disconnected */
+};
+
+/**
+ * BFA TIN event data structure.
+ */
+struct bfa_tin_aen_data_s {
+	u16 vf_id;	/*  vf_id of the IT nexus */
+	u16 rsvd[3];
+	wwn_t lpwwn;	/*  WWN of logical port */
+	wwn_t rpwwn;	/*  WWN of remote(target) port */
+};
+
+/**
+ * Below APIs are needed from BFA driver
+ * Move these to BFA driver public header file?
+ */
+/*  TIN rcvd new PRLI & gets bfad_tin_t ptr from driver this callback */
+void *bfad_tin_rcvd_login_req(void *bfad_tm_port, void *bfa_tin,
+				wwn_t rp_wwn, u32 rp_fcid,
+				struct bfa_prli_req_s prli_req);
+/*  TIN rcvd new PRLO */
+void bfad_tin_rcvd_logout_req(void *bfad_tin, wwn_t rp_wwn, u32 rp_fcid,
+				struct bfa_prlo_req_s prlo_req);
+/*  TIN is online and ready for IO */
+void bfad_tin_online(void *bfad_tin);
+/*  TIN is offline and BFA driver can shutdown its upper stack */
+void bfad_tin_offline(void *bfad_tin);
+/*  TIN does not need this BFA driver tin tag anymore, so can be freed */
+void bfad_tin_res_free(void *bfad_tin);
+
+#endif /* __BFA_DEFS_TIN_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
new file mode 100644
index 000000000000..31881d218515
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_TSENSOR_H__
+#define __BFA_DEFS_TSENSOR_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * Temperature sensor status values
+ */
+enum bfa_tsensor_status {
+	BFA_TSENSOR_STATUS_UNKNOWN   = 1,   /*  unkown status */
+	BFA_TSENSOR_STATUS_FAULTY    = 2,   /*  sensor is faulty */
+	BFA_TSENSOR_STATUS_BELOW_MIN = 3,   /*  temperature below mininum */
+	BFA_TSENSOR_STATUS_NOMINAL   = 4,   /*  normal temperature */
+	BFA_TSENSOR_STATUS_ABOVE_MAX = 5,   /*  temperature above maximum */
+};
+
+/**
+ * Temperature sensor attribute
+ */
+struct bfa_tsensor_attr_s {
+	enum bfa_tsensor_status status;	/*  temperature sensor status */
+	u32        	value;	/*  current temperature in celsius */
+};
+
+#endif /* __BFA_DEFS_TSENSOR_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_types.h b/drivers/scsi/bfa/include/defs/bfa_defs_types.h
new file mode 100644
index 000000000000..4348332b107a
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_types.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_TYPES_H__
+#define __BFA_DEFS_TYPES_H__
+
+#include <bfa_os_inc.h>
+
+enum bfa_boolean {
+	BFA_FALSE = 0,
+	BFA_TRUE  = 1
+};
+#define bfa_boolean_t enum bfa_boolean
+
+#define BFA_STRING_32	32
+
+#endif /* __BFA_DEFS_TYPES_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_version.h b/drivers/scsi/bfa/include/defs/bfa_defs_version.h
new file mode 100644
index 000000000000..f8902a2c9aad
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_version.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_VERSION_H__
+#define __BFA_DEFS_VERSION_H__
+
+#define BFA_VERSION_LEN		64
+
+#endif
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_vf.h b/drivers/scsi/bfa/include/defs/bfa_defs_vf.h
new file mode 100644
index 000000000000..3235be5e9423
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_vf.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_VF_H__
+#define __BFA_DEFS_VF_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_port.h>
+#include <protocol/types.h>
+
+/**
+ * VF states
+ */
+enum bfa_vf_state {
+	BFA_VF_UNINIT    = 0,	/*  fabric is not yet initialized */
+	BFA_VF_LINK_DOWN = 1,	/*  link is down */
+	BFA_VF_FLOGI     = 2,	/*  flogi is in progress */
+	BFA_VF_AUTH      = 3,	/*  authentication in progress */
+	BFA_VF_NOFABRIC  = 4,	/*  fabric is not present */
+	BFA_VF_ONLINE    = 5,	/*  login to fabric is complete */
+	BFA_VF_EVFP      = 6,	/*  EVFP is in progress */
+	BFA_VF_ISOLATED  = 7,	/*  port isolated due to vf_id mismatch */
+};
+
+/**
+ * VF statistics
+ */
+struct bfa_vf_stats_s {
+	u32        flogi_sent;	/*  Num FLOGIs sent 		*/
+	u32        flogi_rsp_err;	/*  FLOGI response errors 	*/
+	u32        flogi_acc_err;	/*  FLOGI accept errors 	*/
+	u32        flogi_accepts;	/*  FLOGI accepts received 	*/
+	u32        flogi_rejects;	/*  FLOGI rejects received 	*/
+	u32        flogi_unknown_rsp; /*  Unknown responses for FLOGI */
+	u32        flogi_alloc_wait; /*  Allocation waits prior to
+					   * sending FLOGI
+					   */
+	u32        flogi_rcvd;	/*  FLOGIs received */
+	u32        flogi_rejected;	/*  Incoming FLOGIs rejected */
+	u32        fabric_onlines;	/*  Internal fabric online
+					 * notification sent to other
+					 * modules
+					 */
+	u32        fabric_offlines; /*  Internal fabric offline
+					  * notification sent to other
+					  * modules
+					  */
+	u32        resvd;
+};
+
+/**
+ * VF attributes returned in queries
+ */
+struct bfa_vf_attr_s {
+	enum bfa_vf_state  state;		/*  VF state */
+	u32        rsvd;
+	wwn_t           fabric_name;	/*  fabric name */
+};
+
+#endif /* __BFA_DEFS_VF_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_vport.h b/drivers/scsi/bfa/include/defs/bfa_defs_vport.h
new file mode 100644
index 000000000000..9f021f43b3b4
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_vport.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_VPORT_H__
+#define __BFA_DEFS_VPORT_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_port.h>
+#include <protocol/types.h>
+
+/**
+ * VPORT states
+ */
+enum bfa_vport_state {
+	BFA_FCS_VPORT_UNINIT 		= 0,
+	BFA_FCS_VPORT_CREATED 		= 1,
+	BFA_FCS_VPORT_OFFLINE 		= 1,
+	BFA_FCS_VPORT_FDISC_SEND 	= 2,
+	BFA_FCS_VPORT_FDISC 		= 3,
+	BFA_FCS_VPORT_FDISC_RETRY 	= 4,
+	BFA_FCS_VPORT_ONLINE 		= 5,
+	BFA_FCS_VPORT_DELETING 		= 6,
+	BFA_FCS_VPORT_CLEANUP 		= 6,
+	BFA_FCS_VPORT_LOGO_SEND 	= 7,
+	BFA_FCS_VPORT_LOGO 			= 8,
+	BFA_FCS_VPORT_ERROR			= 9,
+	BFA_FCS_VPORT_MAX_STATE,
+};
+
+/**
+ * vport statistics
+ */
+struct bfa_vport_stats_s {
+	struct bfa_port_stats_s port_stats;	/*  base class (port) stats */
+	/*
+	 * TODO - remove
+	 */
+
+	u32        fdisc_sent;	/*  num fdisc sent */
+	u32        fdisc_accepts;	/*  fdisc accepts */
+	u32        fdisc_retries;	/*  fdisc retries */
+	u32        fdisc_timeouts;	/*  fdisc timeouts */
+	u32        fdisc_rsp_err;	/*  fdisc response error */
+	u32        fdisc_acc_bad;	/*  bad fdisc accepts */
+	u32        fdisc_rejects;	/*  fdisc rejects */
+	u32        fdisc_unknown_rsp;
+	/*
+	 *!< fdisc rsp unknown error
+	 */
+	u32        fdisc_alloc_wait;/*  fdisc req (fcxp)alloc wait */
+
+	u32        logo_alloc_wait;/*  logo req (fcxp) alloc wait */
+	u32        logo_sent;	/*  logo sent */
+	u32        logo_accepts;	/*  logo accepts */
+	u32        logo_rejects;	/*  logo rejects */
+	u32        logo_rsp_err;	/*  logo rsp errors */
+	u32        logo_unknown_rsp;
+			/*  logo rsp unknown errors */
+
+	u32        fab_no_npiv;	/*  fabric does not support npiv */
+
+	u32        fab_offline;	/*  offline events from fab SM */
+	u32        fab_online;	/*  online events from fab SM */
+	u32        fab_cleanup;	/*  cleanup request from fab SM */
+	u32        rsvd;
+};
+
+/**
+ * BFA vport attribute returned in queries
+ */
+struct bfa_vport_attr_s {
+	struct bfa_port_attr_s   port_attr; /*  base class (port) attributes */
+	enum bfa_vport_state vport_state; /*  vport state */
+	u32          rsvd;
+};
+
+#endif /* __BFA_DEFS_VPORT_H__ */
diff --git a/drivers/scsi/bfa/include/fcb/bfa_fcb.h b/drivers/scsi/bfa/include/fcb/bfa_fcb.h
new file mode 100644
index 000000000000..2963b0bc30e7
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcb/bfa_fcb.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcb.h BFA FCS callback interfaces
+ */
+
+#ifndef __BFA_FCB_H__
+#define __BFA_FCB_H__
+
+/**
+ *  fcb Main fcs callbacks
+ */
+
+void bfa_fcb_exit(struct bfad_s *bfad);
+
+
+
+#endif /* __BFA_FCB_H__ */
diff --git a/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h b/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h
new file mode 100644
index 000000000000..a6c70aee0aa3
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+* : bfad_fcpim.h - BFA FCS initiator mode remote port callbacks
+ */
+
+#ifndef __BFAD_FCB_FCPIM_H__
+#define __BFAD_FCB_FCPIM_H__
+
+struct bfad_itnim_s;
+
+/*
+ * RPIM callbacks
+ */
+
+/**
+ * 	Memory allocation for remote port instance. Called before PRLI is
+ * 	initiated to the remote target port.
+ *
+ * @param[in] bfad		- driver instance
+ * @param[out] itnim		- FCS remote port (IM) instance
+ * @param[out] itnim_drv	- driver remote port (IM) instance
+ *
+ * @return None
+ */
+void bfa_fcb_itnim_alloc(struct bfad_s *bfad, struct bfa_fcs_itnim_s **itnim,
+				    struct bfad_itnim_s **itnim_drv);
+
+/**
+ * 		Free remote port (IM) instance.
+ *
+ * @param[in] bfad	- driver instance
+ * @param[in] itnim_drv	- driver remote port instance
+ *
+ * @return None
+ */
+void            bfa_fcb_itnim_free(struct bfad_s *bfad,
+				   struct bfad_itnim_s *itnim_drv);
+
+/**
+ * 	Notification of when login with a remote target device is complete.
+ *
+ * @param[in] itnim_drv	- driver remote port instance
+ *
+ * @return None
+ */
+void            bfa_fcb_itnim_online(struct bfad_itnim_s *itnim_drv);
+
+/**
+ * 	Notification when login with the remote device is severed.
+ *
+ * @param[in] itnim_drv	- driver remote port instance
+ *
+ * @return None
+ */
+void            bfa_fcb_itnim_offline(struct bfad_itnim_s *itnim_drv);
+
+void            bfa_fcb_itnim_tov_begin(struct bfad_itnim_s *itnim_drv);
+void            bfa_fcb_itnim_tov(struct bfad_itnim_s *itnim_drv);
+
+#endif /* __BFAD_FCB_FCPIM_H__ */
diff --git a/drivers/scsi/bfa/include/fcb/bfa_fcb_port.h b/drivers/scsi/bfa/include/fcb/bfa_fcb_port.h
new file mode 100644
index 000000000000..5fd7f986fa32
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcb/bfa_fcb_port.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcb_port.h BFA FCS virtual port driver interfaces
+ */
+
+#ifndef __BFA_FCB_PORT_H__
+#define __BFA_FCB_PORT_H__
+
+#include <fcb/bfa_fcb_vport.h>
+/**
+ *  fcs_port_fcb FCS port driver interfaces
+ */
+
+/*
+ * Forward declarations
+ */
+struct bfad_port_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * 	Call from FCS to driver module when a port is instantiated. The port
+ * 	can be a base port or a virtual port with in the base fabric or
+ * 	a virtual fabric.
+ *
+ *  On this callback, driver is supposed to create scsi_host, scsi_tgt or
+ *  network interfaces bases on ports personality/roles.
+ *
+ *      base port of base fabric:	vf_drv == NULL && vp_drv == NULL
+ *      vport of base fabric:		vf_drv == NULL && vp_drv != NULL
+ *      base port of VF:		vf_drv != NULL && vp_drv == NULL
+ *      vport of VF:			vf_drv != NULL && vp_drv != NULL
+ *
+ * @param[in] bfad   - driver instance
+ * @param[in] port   - FCS port instance
+ * @param[in] roles  - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+struct bfad_port_s *bfa_fcb_port_new(struct bfad_s *bfad,
+			struct bfa_fcs_port_s *port,
+			enum bfa_port_role roles, struct bfad_vf_s *vf_drv,
+			struct bfad_vport_s *vp_drv);
+
+/**
+ * 	Call from FCS to driver module when a port is deleted. The port
+ * 	can be a base port or a virtual port with in the base fabric or
+ * 	a virtual fabric.
+ *
+ * @param[in] bfad   - driver instance
+ * @param[in] roles  - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+void bfa_fcb_port_delete(struct bfad_s *bfad, enum bfa_port_role roles,
+			struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv);
+
+/**
+ * 	Notification when port transitions to ONLINE state.
+ *
+ * Online notification is a logical link up for the local port. This
+ * notification is sent after a successfull FLOGI, or a successful
+ * link initialization in proviate-loop or N2N topologies.
+ *
+ * @param[in] bfad   - driver instance
+ * @param[in] roles  - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+void bfa_fcb_port_online(struct bfad_s *bfad, enum bfa_port_role roles,
+			struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv);
+
+/**
+ * 	Notification when port transitions to OFFLINE state.
+ *
+ * Offline notification is a logical link down for the local port.
+ *
+ * @param[in] bfad   - driver instance
+ * @param[in] roles  - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+void bfa_fcb_port_offline(struct bfad_s *bfad, enum bfa_port_role roles,
+			struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv);
+
+
+#endif /* __BFA_FCB_PORT_H__ */
diff --git a/drivers/scsi/bfa/include/fcb/bfa_fcb_rport.h b/drivers/scsi/bfa/include/fcb/bfa_fcb_rport.h
new file mode 100644
index 000000000000..e0261bb6d1c1
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcb/bfa_fcb_rport.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcb_rport.h BFA FCS rport driver interfaces
+ */
+
+#ifndef __BFA_FCB_RPORT_H__
+#define __BFA_FCB_RPORT_H__
+
+/**
+ *  fcs_rport_fcb Remote port driver interfaces
+ */
+
+
+struct bfad_rport_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * 	Completion callback for bfa_fcs_rport_add().
+ *
+ * @param[in] rport_drv - driver instance of rport
+ *
+ * @return None
+ */
+void bfa_fcb_rport_add(struct bfad_rport_s *rport_drv);
+
+/**
+ * 	Completion callback for bfa_fcs_rport_remove().
+ *
+ * @param[in] rport_drv - driver instance of rport
+ *
+ * @return None
+ */
+void bfa_fcb_rport_remove(struct bfad_rport_s *rport_drv);
+
+/**
+ * 		Call to allocate a rport instance.
+ *
+ * @param[in] bfad - driver instance
+ * @param[out] rport - BFA FCS instance of rport
+ * @param[out] rport_drv - driver instance of rport
+ *
+ * @retval BFA_STATUS_OK - successfully allocated
+ * @retval BFA_STATUS_ENOMEM - cannot allocate
+ */
+bfa_status_t bfa_fcb_rport_alloc(struct bfad_s *bfad,
+			struct bfa_fcs_rport_s **rport,
+			struct bfad_rport_s **rport_drv);
+
+/**
+ * 	Call to free rport memory resources.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] rport_drv - driver instance of rport
+ *
+ * @return None
+ */
+void bfa_fcb_rport_free(struct bfad_s *bfad, struct bfad_rport_s **rport_drv);
+
+
+
+#endif /* __BFA_FCB_RPORT_H__ */
diff --git a/drivers/scsi/bfa/include/fcb/bfa_fcb_vf.h b/drivers/scsi/bfa/include/fcb/bfa_fcb_vf.h
new file mode 100644
index 000000000000..cfd3fac0a4e2
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcb/bfa_fcb_vf.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcb_vf.h BFA FCS virtual fabric driver interfaces
+ */
+
+#ifndef __BFA_FCB_VF_H__
+#define __BFA_FCB_VF_H__
+
+/**
+ *  fcs_vf_fcb Virtual fabric driver intrefaces
+ */
+
+
+struct bfad_vf_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * 	Completion callback for bfa_fcs_vf_stop().
+ *
+ * @param[in] vf_drv - driver instance of vf
+ *
+ * @return None
+ */
+void            bfa_fcb_vf_stop(struct bfad_vf_s *vf_drv);
+
+
+
+#endif /* __BFA_FCB_VF_H__ */
diff --git a/drivers/scsi/bfa/include/fcb/bfa_fcb_vport.h b/drivers/scsi/bfa/include/fcb/bfa_fcb_vport.h
new file mode 100644
index 000000000000..a39f474c2fcf
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcb/bfa_fcb_vport.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcb_vport.h BFA FCS virtual port driver interfaces
+ */
+
+#ifndef __BFA_FCB_VPORT_H__
+#define __BFA_FCB_VPORT_H__
+
+/**
+ *  fcs_vport_fcb Virtual port driver interfaces
+ */
+
+
+struct bfad_vport_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * 	Completion callback for bfa_fcs_vport_delete().
+ *
+ * @param[in] vport_drv - driver instance of vport
+ *
+ * @return None
+ */
+void            bfa_fcb_vport_delete(struct bfad_vport_s *vport_drv);
+
+
+
+#endif /* __BFA_FCB_VPORT_H__ */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs.h b/drivers/scsi/bfa/include/fcs/bfa_fcs.h
new file mode 100644
index 000000000000..627669c65546
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_H__
+#define __BFA_FCS_H__
+
+#include <cs/bfa_debug.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_version.h>
+#include <bfa.h>
+#include <fcs/bfa_fcs_fabric.h>
+
+#define BFA_FCS_OS_STR_LEN  		64
+
+struct bfa_fcs_stats_s {
+	struct {
+		u32        untagged; /*  untagged receive frames */
+		u32        tagged;	/*  tagged receive frames */
+		u32        vfid_unknown;	/*  VF id is unknown */
+	} uf;
+};
+
+struct bfa_fcs_driver_info_s {
+	u8  version[BFA_VERSION_LEN];		/*  Driver Version */
+	u8  host_machine_name[BFA_FCS_OS_STR_LEN];
+	u8  host_os_name[BFA_FCS_OS_STR_LEN]; /*  OS name and version */
+	u8  host_os_patch[BFA_FCS_OS_STR_LEN];/*  patch or service pack */
+	u8  os_device_name[BFA_FCS_OS_STR_LEN]; /*  Driver Device Name */
+};
+
+struct bfa_fcs_s {
+	struct bfa_s      *bfa;	/*  corresponding BFA bfa instance */
+	struct bfad_s         *bfad; /*  corresponding BDA driver instance */
+	struct bfa_log_mod_s  *logm;	/*  driver logging module instance */
+	struct bfa_trc_mod_s  *trcmod;	/*  tracing module */
+	struct bfa_aen_s      *aen;	/*  aen component */
+	bfa_boolean_t   vf_enabled;	/*  VF mode is enabled */
+	bfa_boolean_t min_cfg;		/* min cfg enabled/disabled */
+	u16        port_vfid;	/*  port default VF ID */
+	struct bfa_fcs_driver_info_s driver_info;
+	struct bfa_fcs_fabric_s fabric; /*  base fabric state machine */
+	struct bfa_fcs_stats_s	stats;	/*  FCS statistics */
+	struct bfa_wc_s       	wc;	/*  waiting counter */
+};
+
+/*
+ * bfa fcs API functions
+ */
+void bfa_fcs_init(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
+			bfa_boolean_t min_cfg);
+void bfa_fcs_driver_info_init(struct bfa_fcs_s *fcs,
+			struct bfa_fcs_driver_info_s *driver_info);
+void bfa_fcs_exit(struct bfa_fcs_s *fcs);
+void bfa_fcs_trc_init(struct bfa_fcs_s *fcs, struct bfa_trc_mod_s *trcmod);
+void bfa_fcs_log_init(struct bfa_fcs_s *fcs, struct bfa_log_mod_s *logmod);
+void bfa_fcs_aen_init(struct bfa_fcs_s *fcs, struct bfa_aen_s *aen);
+void 	  	bfa_fcs_start(struct bfa_fcs_s *fcs);
+
+#endif /* __BFA_FCS_H__ */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_auth.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_auth.h
new file mode 100644
index 000000000000..28c4c9ff08b3
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_auth.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_AUTH_H__
+#define __BFA_FCS_AUTH_H__
+
+struct bfa_fcs_s;
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_auth.h>
+#include <defs/bfa_defs_vf.h>
+#include <cs/bfa_q.h>
+#include <cs/bfa_sm.h>
+#include <defs/bfa_defs_pport.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <protocol/fc_sp.h>
+
+struct bfa_fcs_fabric_s;
+
+
+
+struct bfa_fcs_auth_s {
+	bfa_sm_t	sm;	/*  state machine */
+	bfa_boolean_t   policy;	/*  authentication enabled/disabled */
+	enum bfa_auth_status status;	/*  authentication status */
+	enum auth_rjt_codes  rjt_code;	/*  auth reject status */
+	enum auth_rjt_code_exps  rjt_code_exp;	/*  auth reject reason */
+	enum bfa_auth_algo algo;	/*  Authentication algorithm */
+	struct bfa_auth_stats_s stats;	/*  Statistics */
+	enum auth_dh_gid   group;	/*  DH(diffie-hellman) Group */
+	enum bfa_auth_secretsource source;	/*  Secret source */
+	char            secret[BFA_AUTH_SECRET_STRING_LEN];
+				/*  secret string */
+	u8         secret_len;
+				/*  secret string length */
+	u8         nretries;
+				/*  number of retries */
+	struct bfa_fcs_fabric_s *fabric;/*  pointer to fabric */
+	u8         sentcode;	/*  pointer to response data */
+	u8        *response;	/*  pointer to response data */
+	struct bfa_timer_s delay_timer; 	/*  delay timer */
+	struct bfa_fcxp_s *fcxp;		/*  pointer to fcxp */
+	struct bfa_fcxp_wqe_s fcxp_wqe;
+};
+
+/**
+ * bfa fcs authentication public functions
+ */
+bfa_status_t    bfa_fcs_auth_get_attr(struct bfa_fcs_s *port,
+				      struct bfa_auth_attr_s *attr);
+bfa_status_t    bfa_fcs_auth_set_policy(struct bfa_fcs_s *port,
+					bfa_boolean_t policy);
+enum bfa_auth_status bfa_fcs_auth_get_status(struct bfa_fcs_s *port);
+bfa_status_t    bfa_fcs_auth_set_algo(struct bfa_fcs_s *port,
+				      enum bfa_auth_algo algo);
+bfa_status_t    bfa_fcs_auth_get_stats(struct bfa_fcs_s *port,
+				       struct bfa_auth_stats_s *stats);
+bfa_status_t    bfa_fcs_auth_set_dh_group(struct bfa_fcs_s *port, int group);
+bfa_status_t    bfa_fcs_auth_set_secretstring(struct bfa_fcs_s *port,
+					      char *secret);
+bfa_status_t    bfa_fcs_auth_set_secretstring_encrypt(struct bfa_fcs_s *port,
+					      u32 secret[], u32 len);
+bfa_status_t    bfa_fcs_auth_set_secretsource(struct bfa_fcs_s *port,
+					      enum bfa_auth_secretsource src);
+bfa_status_t    bfa_fcs_auth_reset_stats(struct bfa_fcs_s *port);
+bfa_status_t    bfa_fcs_auth_reinit(struct bfa_fcs_s *port);
+
+#endif /* __BFA_FCS_AUTH_H__ */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h
new file mode 100644
index 000000000000..4ffd2242d3de
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_FABRIC_H__
+#define __BFA_FCS_FABRIC_H__
+
+struct bfa_fcs_s;
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_vf.h>
+#include <cs/bfa_q.h>
+#include <cs/bfa_sm.h>
+#include <defs/bfa_defs_pport.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <protocol/fc_sp.h>
+#include <fcs/bfa_fcs_auth.h>
+
+/*
+ * forward declaration
+ */
+struct bfad_vf_s;
+
+enum bfa_fcs_fabric_type {
+	BFA_FCS_FABRIC_UNKNOWN = 0,
+	BFA_FCS_FABRIC_SWITCHED = 1,
+	BFA_FCS_FABRIC_PLOOP = 2,
+	BFA_FCS_FABRIC_N2N = 3,
+};
+
+
+struct bfa_fcs_fabric_s {
+	struct list_head   qe;		/*  queue element */
+	bfa_sm_t	 sm;		/*  state machine */
+	struct bfa_fcs_s *fcs;		/*  FCS instance */
+	struct bfa_fcs_port_s  bport;	/*  base logical port */
+	enum bfa_fcs_fabric_type fab_type; /*  fabric type */
+	enum bfa_pport_type oper_type;	/*  current link topology */
+	u8         is_vf;		/*  is virtual fabric? */
+	u8         is_npiv;	/*  is NPIV supported ? */
+	u8         is_auth;	/*  is Security/Auth supported ? */
+	u16        bb_credit;	/*  BB credit from fabric */
+	u16        vf_id;		/*  virtual fabric ID */
+	u16        num_vports;	/*  num vports */
+	u16        rsvd;
+	struct list_head         vport_q;	/*  queue of virtual ports */
+	struct list_head         vf_q;	/*  queue of virtual fabrics */
+	struct bfad_vf_s      *vf_drv;	/*  driver vf structure */
+	struct bfa_timer_s link_timer;	/*  Link Failure timer. Vport */
+	wwn_t           fabric_name;	/*  attached fabric name */
+	bfa_boolean_t   auth_reqd;	/*  authentication required	*/
+	struct bfa_timer_s delay_timer;	/*  delay timer		*/
+	union {
+		u16        swp_vfid;/*  switch port VF id		*/
+	} event_arg;
+	struct bfa_fcs_auth_s  auth;	/*  authentication config	*/
+	struct bfa_wc_s        wc;	/*  wait counter for delete	*/
+	struct bfa_vf_stats_s  stats; 	/*  fabric/vf stats		*/
+	struct bfa_lps_s	*lps;	/*  lport login services	*/
+	u8	fabric_ip_addr[BFA_FCS_FABRIC_IPADDR_SZ];  /*  attached
+							    * fabric's ip addr
+							    */
+};
+
+#define bfa_fcs_fabric_npiv_capable(__f)    (__f)->is_npiv
+#define bfa_fcs_fabric_is_switched(__f)			\
+	((__f)->fab_type == BFA_FCS_FABRIC_SWITCHED)
+
+/**
+ *   The design calls for a single implementation of base fabric and vf.
+ */
+#define bfa_fcs_vf_t struct bfa_fcs_fabric_s
+
+struct bfa_vf_event_s {
+	u32        undefined;
+};
+
+/**
+ * bfa fcs vf public functions
+ */
+bfa_status_t bfa_fcs_vf_mode_enable(struct bfa_fcs_s *fcs, u16 vf_id);
+bfa_status_t bfa_fcs_vf_mode_disable(struct bfa_fcs_s *fcs);
+bfa_status_t bfa_fcs_vf_create(bfa_fcs_vf_t *vf, struct bfa_fcs_s *fcs,
+			       u16 vf_id, struct bfa_port_cfg_s *port_cfg,
+			       struct bfad_vf_s *vf_drv);
+bfa_status_t bfa_fcs_vf_delete(bfa_fcs_vf_t *vf);
+void bfa_fcs_vf_start(bfa_fcs_vf_t *vf);
+bfa_status_t bfa_fcs_vf_stop(bfa_fcs_vf_t *vf);
+void bfa_fcs_vf_list(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs);
+void bfa_fcs_vf_list_all(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs);
+void bfa_fcs_vf_get_attr(bfa_fcs_vf_t *vf, struct bfa_vf_attr_s *vf_attr);
+void bfa_fcs_vf_get_stats(bfa_fcs_vf_t *vf,
+			  struct bfa_vf_stats_s *vf_stats);
+void bfa_fcs_vf_clear_stats(bfa_fcs_vf_t *vf);
+void bfa_fcs_vf_get_ports(bfa_fcs_vf_t *vf, wwn_t vpwwn[], int *nports);
+bfa_fcs_vf_t *bfa_fcs_vf_lookup(struct bfa_fcs_s *fcs, u16 vf_id);
+struct bfad_vf_s *bfa_fcs_vf_get_drv_vf(bfa_fcs_vf_t *vf);
+
+#endif /* __BFA_FCS_FABRIC_H__ */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_fcpim.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_fcpim.h
new file mode 100644
index 000000000000..e719f2c3eb35
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_fcpim.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs_fcpim.h BFA FCS FCP Initiator Mode interfaces/defines.
+ */
+
+#ifndef __BFA_FCS_FCPIM_H__
+#define __BFA_FCS_FCPIM_H__
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_itnim.h>
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_rport.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <bfa_fcpim.h>
+
+/*
+ * forward declarations
+ */
+struct bfad_itnim_s;
+
+struct bfa_fcs_itnim_s {
+	bfa_sm_t		sm;		/*  state machine */
+	struct bfa_fcs_rport_s 	*rport;		/*  parent remote rport  */
+	struct bfad_itnim_s   	*itnim_drv;	/*  driver peer instance */
+	struct bfa_fcs_s      	*fcs;		/*  fcs instance         */
+	struct bfa_timer_s 	timer;		/*  timer functions      */
+	struct bfa_itnim_s 	*bfa_itnim;	/*  BFA itnim struct     */
+	bfa_boolean_t	 	seq_rec;	/*  seq recovery support */
+	bfa_boolean_t	 	rec_support;	/*  REC supported        */
+	bfa_boolean_t	 	conf_comp;	/*  FCP_CONF     support */
+	bfa_boolean_t	 	task_retry_id;	/*  task retry id supp   */
+	struct bfa_fcxp_wqe_s 	fcxp_wqe;	/*  wait qelem for fcxp  */
+	struct bfa_fcxp_s *fcxp;		/*  FCXP in use          */
+	struct bfa_itnim_stats_s 	stats;	/*  itn statistics       */
+};
+
+
+static inline struct bfad_port_s *
+bfa_fcs_itnim_get_drvport(struct bfa_fcs_itnim_s *itnim)
+{
+	return itnim->rport->port->bfad_port;
+}
+
+
+static inline struct bfa_fcs_port_s *
+bfa_fcs_itnim_get_port(struct bfa_fcs_itnim_s *itnim)
+{
+	return itnim->rport->port;
+}
+
+
+static inline wwn_t
+bfa_fcs_itnim_get_nwwn(struct bfa_fcs_itnim_s *itnim)
+{
+	return itnim->rport->nwwn;
+}
+
+
+static inline wwn_t
+bfa_fcs_itnim_get_pwwn(struct bfa_fcs_itnim_s *itnim)
+{
+	return itnim->rport->pwwn;
+}
+
+
+static inline u32
+bfa_fcs_itnim_get_fcid(struct bfa_fcs_itnim_s *itnim)
+{
+	return itnim->rport->pid;
+}
+
+
+static inline   u32
+bfa_fcs_itnim_get_maxfrsize(struct bfa_fcs_itnim_s *itnim)
+{
+	return itnim->rport->maxfrsize;
+}
+
+
+static inline   enum fc_cos
+bfa_fcs_itnim_get_cos(struct bfa_fcs_itnim_s *itnim)
+{
+	return itnim->rport->fc_cos;
+}
+
+
+static inline struct bfad_itnim_s *
+bfa_fcs_itnim_get_drvitn(struct bfa_fcs_itnim_s *itnim)
+{
+	return itnim->itnim_drv;
+}
+
+
+static inline struct bfa_itnim_s *
+bfa_fcs_itnim_get_halitn(struct bfa_fcs_itnim_s *itnim)
+{
+	return itnim->bfa_itnim;
+}
+
+/**
+ * bfa fcs FCP Initiator mode API functions
+ */
+void bfa_fcs_itnim_get_attr(struct bfa_fcs_itnim_s *itnim,
+			struct bfa_itnim_attr_s *attr);
+void bfa_fcs_itnim_get_stats(struct bfa_fcs_itnim_s *itnim,
+			struct bfa_itnim_stats_s *stats);
+struct bfa_fcs_itnim_s *bfa_fcs_itnim_lookup(struct bfa_fcs_port_s *port,
+			wwn_t rpwwn);
+bfa_status_t bfa_fcs_itnim_attr_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+			struct bfa_itnim_attr_s *attr);
+bfa_status_t bfa_fcs_itnim_stats_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+			struct bfa_itnim_stats_s *stats);
+bfa_status_t bfa_fcs_itnim_stats_clear(struct bfa_fcs_port_s *port,
+			wwn_t rpwwn);
+#endif /* __BFA_FCS_FCPIM_H__ */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_fdmi.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_fdmi.h
new file mode 100644
index 000000000000..4441fffc9c82
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_fdmi.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs_fdmi.h BFA fcs fdmi module public interface
+ */
+
+#ifndef __BFA_FCS_FDMI_H__
+#define __BFA_FCS_FDMI_H__
+#include <bfa_os_inc.h>
+#include <protocol/fdmi.h>
+
+#define	BFA_FCS_FDMI_SUPORTED_SPEEDS  (FDMI_TRANS_SPEED_1G  | \
+					FDMI_TRANS_SPEED_2G | \
+					FDMI_TRANS_SPEED_4G | \
+					FDMI_TRANS_SPEED_8G)
+
+/*
+* HBA Attribute Block : BFA internal representation. Note : Some variable
+* sizes have been trimmed to suit BFA For Ex : Model will be "Brocade". Based
+ * on this the size has been reduced to 16 bytes from the standard's 64 bytes.
+ */
+struct bfa_fcs_fdmi_hba_attr_s {
+	wwn_t           node_name;
+	u8         manufacturer[64];
+	u8         serial_num[64];
+	u8         model[16];
+	u8         model_desc[256];
+	u8         hw_version[8];
+	u8         driver_version[8];
+	u8         option_rom_ver[BFA_VERSION_LEN];
+	u8         fw_version[8];
+	u8         os_name[256];
+	u32        max_ct_pyld;
+};
+
+/*
+ * Port Attribute Block
+ */
+struct bfa_fcs_fdmi_port_attr_s {
+	u8         supp_fc4_types[32];	/* supported FC4 types */
+	u32        supp_speed;	/* supported speed */
+	u32        curr_speed;	/* current Speed */
+	u32        max_frm_size;	/* max frame size */
+	u8         os_device_name[256];	/* OS device Name */
+	u8         host_name[256];	/* host name */
+};
+
+#endif /* __BFA_FCS_FDMI_H__ */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h
new file mode 100644
index 000000000000..b85cba884b96
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h
@@ -0,0 +1,226 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs_port.h BFA fcs port module public interface
+ */
+
+#ifndef __BFA_FCS_PORT_H__
+#define __BFA_FCS_PORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_rport.h>
+#include <cs/bfa_q.h>
+#include <bfa_svc.h>
+#include <cs/bfa_wc.h>
+
+struct bfa_fcs_s;
+struct bfa_fcs_fabric_s;
+
+/*
+* @todo : need to move to a global config file.
+ * Maximum Vports supported per physical port or vf.
+ */
+#define BFA_FCS_MAX_VPORTS_SUPP_CB  255
+#define BFA_FCS_MAX_VPORTS_SUPP_CT  191
+
+/*
+* @todo : need to move to a global config file.
+ * Maximum Rports supported per port (physical/logical).
+ */
+#define BFA_FCS_MAX_RPORTS_SUPP  256	/* @todo : tentative value */
+
+
+struct bfa_fcs_port_ns_s {
+	bfa_sm_t        sm;		/*  state machine */
+	struct bfa_timer_s timer;
+	struct bfa_fcs_port_s *port;	/*  parent port */
+	struct bfa_fcxp_s *fcxp;
+	struct bfa_fcxp_wqe_s fcxp_wqe;
+};
+
+
+struct bfa_fcs_port_scn_s {
+	bfa_sm_t        sm;		/*  state machine */
+	struct bfa_timer_s timer;
+	struct bfa_fcs_port_s *port;	/*  parent port */
+	struct bfa_fcxp_s *fcxp;
+	struct bfa_fcxp_wqe_s fcxp_wqe;
+};
+
+
+struct bfa_fcs_port_fdmi_s {
+	bfa_sm_t        sm;		/*  state machine */
+	struct bfa_timer_s timer;
+	struct bfa_fcs_port_ms_s *ms;	/*  parent ms */
+	struct bfa_fcxp_s *fcxp;
+	struct bfa_fcxp_wqe_s fcxp_wqe;
+	u8         retry_cnt;	/*  retry count */
+	u8	 	   rsvd[3];
+};
+
+
+struct bfa_fcs_port_ms_s {
+	bfa_sm_t        sm;		/*  state machine */
+	struct bfa_timer_s timer;
+	struct bfa_fcs_port_s *port;	/*  parent port */
+	struct bfa_fcxp_s *fcxp;
+	struct bfa_fcxp_wqe_s fcxp_wqe;
+	struct bfa_fcs_port_fdmi_s fdmi;	/*  FDMI component of MS */
+	u8         retry_cnt;	/*  retry count */
+	u8	 	   rsvd[3];
+};
+
+
+struct bfa_fcs_port_fab_s {
+	struct bfa_fcs_port_ns_s ns;	/*  NS component of port */
+	struct bfa_fcs_port_scn_s scn;	/*  scn component of port */
+	struct bfa_fcs_port_ms_s ms;	/*  MS component of port */
+};
+
+
+
+#define 	MAX_ALPA_COUNT 		127
+
+struct bfa_fcs_port_loop_s {
+	u8         num_alpa;	/*  Num of ALPA entries in the map */
+	u8         alpa_pos_map[MAX_ALPA_COUNT];	/*  ALPA Positional
+							 *Map */
+	struct bfa_fcs_port_s *port;	/*  parent port */
+};
+
+
+
+struct bfa_fcs_port_n2n_s {
+	u32        rsvd;
+	u16        reply_oxid;	/*  ox_id from the req flogi to be
+					 *used in flogi acc */
+	wwn_t           rem_port_wwn;	/*  Attached port's wwn */
+};
+
+
+union bfa_fcs_port_topo_u {
+	struct bfa_fcs_port_fab_s pfab;
+	struct bfa_fcs_port_loop_s ploop;
+	struct bfa_fcs_port_n2n_s pn2n;
+};
+
+
+struct bfa_fcs_port_s {
+	struct list_head         qe;	/*  used by port/vport */
+	bfa_sm_t               sm;	/*  state machine */
+	struct bfa_fcs_fabric_s *fabric;	/*  parent fabric */
+	struct bfa_port_cfg_s  port_cfg;	/*  port configuration */
+	struct bfa_timer_s link_timer;	/*  timer for link offline */
+	u32        pid : 24;	/*  FC address */
+	u8         lp_tag;		/*  lport tag */
+	u16        num_rports;	/*  Num of r-ports */
+	struct list_head rport_q;	/*  queue of discovered r-ports */
+	struct bfa_fcs_s *fcs;	/*  FCS instance */
+	union bfa_fcs_port_topo_u port_topo;	/*  fabric/loop/n2n details */
+	struct bfad_port_s *bfad_port;	/*  driver peer instance */
+	struct bfa_fcs_vport_s *vport;	/*  NULL for base ports */
+	struct bfa_fcxp_s *fcxp;
+	struct bfa_fcxp_wqe_s fcxp_wqe;
+	struct bfa_port_stats_s stats;
+	struct bfa_wc_s        wc;	/*  waiting counter for events */
+};
+
+#define bfa_fcs_lport_t struct bfa_fcs_port_s
+
+/**
+ * Symbolic Name related defines
+ *  Total bytes 255.
+ *  Physical Port's symbolic name 128 bytes.
+ *  For Vports, Vport's symbolic name is appended to the Physical port's
+ *  Symbolic Name.
+ *
+ *  Physical Port's symbolic name Format : (Total 128 bytes)
+ *  Adapter Model number/name : 12 bytes
+ *  Driver Version     : 10 bytes
+ *  Host Machine Name  : 30 bytes
+ * 	Host OS Info	   : 48 bytes
+ * 	Host OS PATCH Info : 16 bytes
+ *  ( remaining 12 bytes reserved to be used for separator)
+ */
+#define BFA_FCS_PORT_SYMBNAME_SEPARATOR 		" | "
+
+#define BFA_FCS_PORT_SYMBNAME_MODEL_SZ			12
+#define BFA_FCS_PORT_SYMBNAME_VERSION_SZ 		10
+#define BFA_FCS_PORT_SYMBNAME_MACHINENAME_SZ 	30
+#define BFA_FCS_PORT_SYMBNAME_OSINFO_SZ			48
+#define BFA_FCS_PORT_SYMBNAME_OSPATCH_SZ		16
+
+/**
+ * Get FC port ID for a logical port.
+ */
+#define bfa_fcs_port_get_fcid(_lport)	((_lport)->pid)
+#define bfa_fcs_port_get_pwwn(_lport)	((_lport)->port_cfg.pwwn)
+#define bfa_fcs_port_get_nwwn(_lport)	((_lport)->port_cfg.nwwn)
+#define bfa_fcs_port_get_psym_name(_lport)	((_lport)->port_cfg.sym_name)
+#define bfa_fcs_port_is_initiator(_lport)	\
+			((_lport)->port_cfg.roles & BFA_PORT_ROLE_FCP_IM)
+#define bfa_fcs_port_is_target(_lport)	\
+			((_lport)->port_cfg.roles & BFA_PORT_ROLE_FCP_TM)
+#define bfa_fcs_port_get_nrports(_lport)	\
+			((_lport) ? (_lport)->num_rports : 0)
+
+static inline struct bfad_port_s *
+bfa_fcs_port_get_drvport(struct bfa_fcs_port_s *port)
+{
+	return port->bfad_port;
+}
+
+
+#define bfa_fcs_port_get_opertype(_lport)	(_lport)->fabric->oper_type
+
+
+#define bfa_fcs_port_get_fabric_name(_lport)	(_lport)->fabric->fabric_name
+
+
+#define bfa_fcs_port_get_fabric_ipaddr(_lport)	(_lport)->fabric->fabric_ip_addr
+
+/**
+ * bfa fcs port public functions
+ */
+void bfa_fcs_cfg_base_port(struct bfa_fcs_s *fcs,
+			struct bfa_port_cfg_s *port_cfg);
+struct bfa_fcs_port_s *bfa_fcs_get_base_port(struct bfa_fcs_s *fcs);
+void bfa_fcs_port_get_rports(struct bfa_fcs_port_s *port,
+			wwn_t rport_wwns[], int *nrports);
+
+wwn_t bfa_fcs_port_get_rport(struct bfa_fcs_port_s *port, wwn_t wwn,
+			int index, int nrports, bfa_boolean_t bwwn);
+
+struct bfa_fcs_port_s *bfa_fcs_lookup_port(struct bfa_fcs_s *fcs,
+			u16 vf_id, wwn_t lpwwn);
+
+void bfa_fcs_port_get_info(struct bfa_fcs_port_s *port,
+			struct bfa_port_info_s *port_info);
+void bfa_fcs_port_get_attr(struct bfa_fcs_port_s *port,
+			struct bfa_port_attr_s *port_attr);
+void bfa_fcs_port_get_stats(struct bfa_fcs_port_s *fcs_port,
+			struct bfa_port_stats_s *port_stats);
+void bfa_fcs_port_clear_stats(struct bfa_fcs_port_s *fcs_port);
+enum bfa_pport_speed bfa_fcs_port_get_rport_max_speed(
+			struct bfa_fcs_port_s *port);
+void bfa_fcs_port_enable_ipfc_roles(struct bfa_fcs_port_s *fcs_port);
+void bfa_fcs_port_disable_ipfc_roles(struct bfa_fcs_port_s *fcs_port);
+
+#endif /* __BFA_FCS_PORT_H__ */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_rport.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_rport.h
new file mode 100644
index 000000000000..702b95b76c2d
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_rport.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_RPORT_H__
+#define __BFA_FCS_RPORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <cs/bfa_q.h>
+#include <fcs/bfa_fcs.h>
+#include <defs/bfa_defs_rport.h>
+
+#define BFA_FCS_RPORT_DEF_DEL_TIMEOUT 	90 	/* in secs */
+/*
+ * forward declarations
+ */
+struct bfad_rport_s;
+
+struct bfa_fcs_itnim_s;
+struct bfa_fcs_tin_s;
+struct bfa_fcs_iprp_s;
+
+/* Rport Features (RPF) */
+struct bfa_fcs_rpf_s {
+	bfa_sm_t               sm;	/*  state machine */
+	struct bfa_fcs_rport_s *rport;	/*  parent rport */
+	struct bfa_timer_s 	timer;	/*  general purpose timer */
+	struct bfa_fcxp_s 	*fcxp;	/*  FCXP needed for discarding */
+	struct bfa_fcxp_wqe_s 	fcxp_wqe;	/*  fcxp wait queue element */
+	int             	rpsc_retries;	/*  max RPSC retry attempts */
+	enum bfa_pport_speed 	rpsc_speed;	/* Current Speed from RPSC.
+						 * O if RPSC fails */
+	enum bfa_pport_speed	assigned_speed;	/* Speed assigned by the user.
+						 * will be used if RPSC is not
+						 * supported by the rport */
+};
+
+struct bfa_fcs_rport_s {
+	struct list_head         qe;	/*  used by port/vport */
+	struct bfa_fcs_port_s *port;	/*  parent FCS port */
+	struct bfa_fcs_s      *fcs;	/*  fcs instance */
+	struct bfad_rport_s   *rp_drv;	/*  driver peer instance */
+	u32        pid;	/*  port ID of rport */
+	u16        maxfrsize;	/*  maximum frame size */
+	u16        reply_oxid;	/*  OX_ID of inbound requests */
+	enum fc_cos        fc_cos;	/*  FC classes of service supp */
+	bfa_boolean_t   cisc;	/*  CISC capable device */
+	wwn_t           pwwn;	/*  port wwn of rport */
+	wwn_t           nwwn;	/*  node wwn of rport */
+	struct bfa_rport_symname_s psym_name; /*  port symbolic name  */
+	bfa_sm_t        sm;		/*  state machine */
+	struct bfa_timer_s timer;	/*  general purpose timer */
+	struct bfa_fcs_itnim_s *itnim;	/*  ITN initiator mode role */
+	struct bfa_fcs_tin_s *tin;	/*  ITN initiator mode role */
+	struct bfa_fcs_iprp_s *iprp;	/*  IP/FC role */
+	struct bfa_rport_s *bfa_rport;	/*  BFA Rport */
+	struct bfa_fcxp_s *fcxp;	/*  FCXP needed for discarding */
+	int             plogi_retries;	/*  max plogi retry attempts */
+	int             ns_retries;	/*  max NS query retry attempts */
+	struct bfa_fcxp_wqe_s 	fcxp_wqe; /*  fcxp wait queue element */
+	struct bfa_rport_stats_s stats;	/*  rport stats */
+	enum bfa_rport_function	scsi_function;  /*  Initiator/Target */
+	struct bfa_fcs_rpf_s rpf; 	/* Rport features module */
+};
+
+static inline struct bfa_rport_s *
+bfa_fcs_rport_get_halrport(struct bfa_fcs_rport_s *rport)
+{
+	return rport->bfa_rport;
+}
+
+/**
+ * bfa fcs rport API functions
+ */
+bfa_status_t bfa_fcs_rport_add(struct bfa_fcs_port_s *port, wwn_t *pwwn,
+			struct bfa_fcs_rport_s *rport,
+			struct bfad_rport_s *rport_drv);
+bfa_status_t bfa_fcs_rport_remove(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_get_attr(struct bfa_fcs_rport_s *rport,
+			struct bfa_rport_attr_s *attr);
+void bfa_fcs_rport_get_stats(struct bfa_fcs_rport_s *rport,
+			struct bfa_rport_stats_s *stats);
+void bfa_fcs_rport_clear_stats(struct bfa_fcs_rport_s *rport);
+struct bfa_fcs_rport_s *bfa_fcs_rport_lookup(struct bfa_fcs_port_s *port,
+			wwn_t rpwwn);
+struct bfa_fcs_rport_s *bfa_fcs_rport_lookup_by_nwwn(
+			struct bfa_fcs_port_s *port, wwn_t rnwwn);
+void bfa_fcs_rport_set_del_timeout(u8 rport_tmo);
+void bfa_fcs_rport_set_speed(struct bfa_fcs_rport_s *rport,
+			enum bfa_pport_speed speed);
+#endif /* __BFA_FCS_RPORT_H__ */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_vport.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_vport.h
new file mode 100644
index 000000000000..cd33f2cd5c34
--- /dev/null
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_vport.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs_vport.h BFA fcs vport module public interface
+ */
+
+#ifndef __BFA_FCS_VPORT_H__
+#define __BFA_FCS_VPORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_vport.h>
+#include <fcs/bfa_fcs.h>
+#include <fcb/bfa_fcb_vport.h>
+
+struct bfa_fcs_vport_s {
+	struct list_head		qe;		/*  queue elem	 */
+	bfa_sm_t		sm;		/*  state machine	*/
+	bfa_fcs_lport_t		lport;		/*  logical port	*/
+	struct bfa_timer_s	timer;		/*  general purpose timer */
+	struct bfad_vport_s	*vport_drv;	/*  Driver private	*/
+	struct bfa_vport_stats_s vport_stats;	/*  vport statistics	*/
+	struct bfa_lps_s	*lps;		/*  Lport login service */
+	int			fdisc_retries;
+};
+
+#define bfa_fcs_vport_get_port(vport) \
+			((struct bfa_fcs_port_s  *)(&vport->port))
+
+/**
+ * bfa fcs vport public functions
+ */
+bfa_status_t bfa_fcs_vport_create(struct bfa_fcs_vport_s *vport,
+			struct bfa_fcs_s *fcs, u16 vf_id,
+			struct bfa_port_cfg_s *port_cfg,
+			struct bfad_vport_s *vport_drv);
+bfa_status_t bfa_fcs_vport_delete(struct bfa_fcs_vport_s *vport);
+bfa_status_t bfa_fcs_vport_start(struct bfa_fcs_vport_s *vport);
+bfa_status_t bfa_fcs_vport_stop(struct bfa_fcs_vport_s *vport);
+void bfa_fcs_vport_get_attr(struct bfa_fcs_vport_s *vport,
+			struct bfa_vport_attr_s *vport_attr);
+void bfa_fcs_vport_get_stats(struct bfa_fcs_vport_s *vport,
+			struct bfa_vport_stats_s *vport_stats);
+void bfa_fcs_vport_clr_stats(struct bfa_fcs_vport_s *vport);
+struct bfa_fcs_vport_s *bfa_fcs_vport_lookup(struct bfa_fcs_s *fcs,
+			u16 vf_id, wwn_t vpwwn);
+
+#endif /* __BFA_FCS_VPORT_H__ */
diff --git a/drivers/scsi/bfa/include/log/bfa_log_fcs.h b/drivers/scsi/bfa/include/log/bfa_log_fcs.h
new file mode 100644
index 000000000000..b6f5df8827f8
--- /dev/null
+++ b/drivers/scsi/bfa/include/log/bfa_log_fcs.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * messages define for FCS Module
+ */
+#ifndef	__BFA_LOG_FCS_H__
+#define	__BFA_LOG_FCS_H__
+#include  <cs/bfa_log.h>
+#define BFA_LOG_FCS_FABRIC_NOSWITCH 	\
+	(((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_FCS_FABRIC_ISOLATED 	\
+	(((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 2)
+#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_hal.h b/drivers/scsi/bfa/include/log/bfa_log_hal.h
new file mode 100644
index 000000000000..0412aea2ec30
--- /dev/null
+++ b/drivers/scsi/bfa/include/log/bfa_log_hal.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for HAL Module */
+#ifndef	__BFA_LOG_HAL_H__
+#define	__BFA_LOG_HAL_H__
+#include  <cs/bfa_log.h>
+#define BFA_LOG_HAL_ASSERT \
+	(((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_HAL_HEARTBEAT_FAILURE \
+	(((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 2)
+#define BFA_LOG_HAL_FCPIM_PARM_INVALID \
+	(((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 3)
+#define BFA_LOG_HAL_SM_ASSERT \
+	(((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 4)
+#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_linux.h b/drivers/scsi/bfa/include/log/bfa_log_linux.h
new file mode 100644
index 000000000000..317c0547ee16
--- /dev/null
+++ b/drivers/scsi/bfa/include/log/bfa_log_linux.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for LINUX Module */
+#ifndef	__BFA_LOG_LINUX_H__
+#define	__BFA_LOG_LINUX_H__
+#include  <cs/bfa_log.h>
+#define BFA_LOG_LINUX_DEVICE_CLAIMED \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_LINUX_HASH_INIT_FAILED \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 2)
+#define BFA_LOG_LINUX_SYSFS_FAILED \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 3)
+#define BFA_LOG_LINUX_MEM_ALLOC_FAILED \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 4)
+#define BFA_LOG_LINUX_DRIVER_REGISTRATION_FAILED \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 5)
+#define BFA_LOG_LINUX_ITNIM_FREE \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 6)
+#define BFA_LOG_LINUX_ITNIM_ONLINE \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 7)
+#define BFA_LOG_LINUX_ITNIM_OFFLINE \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 8)
+#define BFA_LOG_LINUX_SCSI_HOST_FREE \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 9)
+#define BFA_LOG_LINUX_SCSI_ABORT \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 10)
+#define BFA_LOG_LINUX_SCSI_ABORT_COMP \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 11)
+#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_wdrv.h b/drivers/scsi/bfa/include/log/bfa_log_wdrv.h
new file mode 100644
index 000000000000..809a95f7afe2
--- /dev/null
+++ b/drivers/scsi/bfa/include/log/bfa_log_wdrv.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * messages define for WDRV Module
+ */
+#ifndef	__BFA_LOG_WDRV_H__
+#define	__BFA_LOG_WDRV_H__
+#include  <cs/bfa_log.h>
+#define BFA_LOG_WDRV_IOC_INIT_ERROR 	\
+	(((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_WDRV_IOC_INTERNAL_ERROR \
+	(((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 2)
+#define BFA_LOG_WDRV_IOC_START_ERROR 	\
+	(((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 3)
+#define BFA_LOG_WDRV_IOC_STOP_ERROR 	\
+	(((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 4)
+#define BFA_LOG_WDRV_INSUFFICIENT_RESOURCES \
+	(((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 5)
+#define BFA_LOG_WDRV_BASE_ADDRESS_MAP_ERROR \
+	(((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 6)
+#endif
diff --git a/drivers/scsi/bfa/include/protocol/ct.h b/drivers/scsi/bfa/include/protocol/ct.h
new file mode 100644
index 000000000000..c59d6630b070
--- /dev/null
+++ b/drivers/scsi/bfa/include/protocol/ct.h
@@ -0,0 +1,492 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __CT_H__
+#define __CT_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+struct ct_hdr_s{
+	u32	rev_id:8;	/* Revision of the CT */
+	u32	in_id:24;	/* Initiator Id */
+	u32	gs_type:8;	/* Generic service Type */
+	u32	gs_sub_type:8;	/* Generic service sub type */
+	u32	options:8;	/* options */
+	u32	rsvrd:8;	/* reserved */
+	u32	cmd_rsp_code:16;/* ct command/response code */
+	u32	max_res_size:16;/* maximum/residual size */
+	u32	frag_id:8;	/* fragment ID */
+	u32	reason_code:8;	/* reason code */
+	u32	exp_code:8;	/* explanation code */
+	u32	vendor_unq:8;	/* vendor unique */
+};
+
+/*
+ * defines for the Revision
+ */
+enum {
+	CT_GS3_REVISION = 0x01,
+};
+
+/*
+ * defines for gs_type
+ */
+enum {
+	CT_GSTYPE_KEYSERVICE	= 0xF7,
+	CT_GSTYPE_ALIASSERVICE	= 0xF8,
+	CT_GSTYPE_MGMTSERVICE	= 0xFA,
+	CT_GSTYPE_TIMESERVICE	= 0xFB,
+	CT_GSTYPE_DIRSERVICE	= 0xFC,
+};
+
+/*
+ * defines for gs_sub_type for gs type directory service
+ */
+enum {
+	CT_GSSUBTYPE_NAMESERVER = 0x02,
+};
+
+/*
+ * defines for gs_sub_type for gs type management service
+ */
+enum {
+	CT_GSSUBTYPE_CFGSERVER	= 0x01,
+	CT_GSSUBTYPE_UNZONED_NS = 0x02,
+	CT_GSSUBTYPE_ZONESERVER = 0x03,
+	CT_GSSUBTYPE_LOCKSERVER = 0x04,
+	CT_GSSUBTYPE_HBA_MGMTSERVER = 0x10,	/* for FDMI */
+};
+
+/*
+ * defines for CT response code field
+ */
+enum {
+	CT_RSP_REJECT = 0x8001,
+	CT_RSP_ACCEPT = 0x8002,
+};
+
+/*
+ * defintions for CT reason code
+ */
+enum {
+	CT_RSN_INV_CMD		= 0x01,
+	CT_RSN_INV_VER		= 0x02,
+	CT_RSN_LOGIC_ERR	= 0x03,
+	CT_RSN_INV_SIZE		= 0x04,
+	CT_RSN_LOGICAL_BUSY	= 0x05,
+	CT_RSN_PROTO_ERR	= 0x07,
+	CT_RSN_UNABLE_TO_PERF	= 0x09,
+	CT_RSN_NOT_SUPP			= 0x0B,
+	CT_RSN_SERVER_NOT_AVBL  = 0x0D,
+	CT_RSN_SESSION_COULD_NOT_BE_ESTBD = 0x0E,
+	CT_RSN_VENDOR_SPECIFIC  = 0xFF,
+
+};
+
+/*
+ * definitions for explanations code for Name server
+ */
+enum {
+	CT_NS_EXP_NOADDITIONAL	= 0x00,
+	CT_NS_EXP_ID_NOT_REG	= 0x01,
+	CT_NS_EXP_PN_NOT_REG	= 0x02,
+	CT_NS_EXP_NN_NOT_REG	= 0x03,
+	CT_NS_EXP_CS_NOT_REG	= 0x04,
+	CT_NS_EXP_IPN_NOT_REG	= 0x05,
+	CT_NS_EXP_IPA_NOT_REG	= 0x06,
+	CT_NS_EXP_FT_NOT_REG	= 0x07,
+	CT_NS_EXP_SPN_NOT_REG	= 0x08,
+	CT_NS_EXP_SNN_NOT_REG	= 0x09,
+	CT_NS_EXP_PT_NOT_REG	= 0x0A,
+	CT_NS_EXP_IPP_NOT_REG	= 0x0B,
+	CT_NS_EXP_FPN_NOT_REG	= 0x0C,
+	CT_NS_EXP_HA_NOT_REG	= 0x0D,
+	CT_NS_EXP_FD_NOT_REG	= 0x0E,
+	CT_NS_EXP_FF_NOT_REG	= 0x0F,
+	CT_NS_EXP_ACCESSDENIED	= 0x10,
+	CT_NS_EXP_UNACCEPTABLE_ID = 0x11,
+	CT_NS_EXP_DATABASEEMPTY			= 0x12,
+	CT_NS_EXP_NOT_REG_IN_SCOPE 		= 0x13,
+	CT_NS_EXP_DOM_ID_NOT_PRESENT 	= 0x14,
+	CT_NS_EXP_PORT_NUM_NOT_PRESENT  = 0x15,
+	CT_NS_EXP_NO_DEVICE_ATTACHED 	= 0x16
+};
+
+/*
+ * defintions for the explanation code for all servers
+ */
+enum {
+	CT_EXP_AUTH_EXCEPTION			= 0xF1,
+	CT_EXP_DB_FULL					= 0xF2,
+	CT_EXP_DB_EMPTY					= 0xF3,
+	CT_EXP_PROCESSING_REQ			= 0xF4,
+	CT_EXP_UNABLE_TO_VERIFY_CONN	= 0xF5,
+	CT_EXP_DEVICES_NOT_IN_CMN_ZONE  = 0xF6
+};
+
+/*
+ * Command codes for Name server
+ */
+enum {
+	GS_GID_PN	= 0x0121,	/* Get Id on port name */
+	GS_GPN_ID	= 0x0112,	/* Get port name on ID */
+	GS_GNN_ID	= 0x0113,	/* Get node name on ID */
+	GS_GID_FT	= 0x0171,	/* Get Id on FC4 type */
+	GS_GSPN_ID	= 0x0118,	/* Get symbolic PN on ID */
+	GS_RFT_ID	= 0x0217,	/* Register fc4type on ID */
+	GS_RSPN_ID	= 0x0218,	/* Register symbolic PN on ID */
+	GS_RPN_ID	= 0x0212,	/* Register port name */
+	GS_RNN_ID	= 0x0213,	/* Register node name */
+	GS_RCS_ID	= 0x0214,	/* Register class of service */
+	GS_RPT_ID	= 0x021A,	/* Register port type */
+	GS_GA_NXT	= 0x0100,	/* Get all next */
+	GS_RFF_ID	= 0x021F,	/* Register FC4 Feature		*/
+};
+
+struct fcgs_id_req_s{
+	u32	rsvd:8;
+	u32	dap:24;	/* port identifier */
+};
+#define fcgs_gpnid_req_t struct fcgs_id_req_s
+#define fcgs_gnnid_req_t struct fcgs_id_req_s
+#define fcgs_gspnid_req_t struct fcgs_id_req_s
+
+struct fcgs_gidpn_req_s{
+	wwn_t	port_name;	/* port wwn */
+};
+
+struct fcgs_gidpn_resp_s{
+	u32	rsvd:8;
+	u32	dap:24;	/* port identifier */
+};
+
+/**
+ * RFT_ID
+ */
+struct fcgs_rftid_req_s {
+	u32	rsvd:8;
+	u32	dap:24;		/* port identifier */
+	u32	fc4_type[8];	/* fc4 types */
+};
+
+/**
+ * RFF_ID : Register FC4 features.
+ */
+
+#define FC_GS_FCP_FC4_FEATURE_INITIATOR  0x02
+#define FC_GS_FCP_FC4_FEATURE_TARGET	 0x01
+
+struct fcgs_rffid_req_s{
+    u32    rsvd          :8;
+    u32    dap        	  :24;		/* port identifier	*/
+    u32    rsvd1         :16;
+    u32    fc4ftr_bits   :8;		/* fc4 feature bits	*/
+    u32    fc4_type      :8;		/* corresponding FC4 Type */
+};
+
+/**
+ * GID_FT Request
+ */
+struct fcgs_gidft_req_s{
+	u8	reserved;
+	u8	domain_id;	/* domain, 0 - all fabric */
+	u8	area_id;	/* area, 0 - whole domain */
+	u8	fc4_type;	/* FC_TYPE_FCP for SCSI devices */
+};				/* GID_FT Request */
+
+/**
+ * GID_FT Response
+ */
+struct fcgs_gidft_resp_s {
+	u8		last:1;	/* last port identifier flag */
+	u8		reserved:7;
+	u32	pid:24;	/* port identifier */
+};				/* GID_FT Response */
+
+/**
+ * RSPN_ID
+ */
+struct fcgs_rspnid_req_s{
+	u32	rsvd:8;
+	u32	dap:24;		/* port identifier */
+	u8		spn_len;	/* symbolic port name length */
+	u8		spn[256];	/* symbolic port name */
+};
+
+/**
+ * RPN_ID
+ */
+struct fcgs_rpnid_req_s{
+	u32	rsvd:8;
+	u32	port_id:24;
+	wwn_t		port_name;
+};
+
+/**
+ * RNN_ID
+ */
+struct fcgs_rnnid_req_s{
+	u32	rsvd:8;
+	u32	port_id:24;
+	wwn_t		node_name;
+};
+
+/**
+ * RCS_ID
+ */
+struct fcgs_rcsid_req_s{
+	u32	rsvd:8;
+	u32	port_id:24;
+	u32	cos;
+};
+
+/**
+ * RPT_ID
+ */
+struct fcgs_rptid_req_s{
+	u32	rsvd:8;
+	u32	port_id:24;
+	u32	port_type:8;
+	u32	rsvd1:24;
+};
+
+/**
+ * GA_NXT Request
+ */
+struct fcgs_ganxt_req_s{
+	u32	rsvd:8;
+	u32	port_id:24;
+};
+
+/**
+ * GA_NXT Response
+ */
+struct fcgs_ganxt_rsp_s{
+	u32	port_type:8;	/* Port Type */
+	u32	port_id:24;	/* Port Identifier */
+	wwn_t		port_name;	/* Port Name */
+	u8		spn_len;	/* Length of Symbolic Port Name */
+	char		spn[255];	/* Symbolic Port Name */
+	wwn_t		node_name;	/* Node Name */
+	u8		snn_len;	/* Length of Symbolic Node Name */
+	char		snn[255];	/* Symbolic Node Name */
+	u8		ipa[8];		/* Initial Process Associator */
+	u8		ip[16];		/* IP Address */
+	u32	cos;		/* Class of Service */
+	u32	fc4types[8];	/* FC-4 TYPEs */
+	wwn_t		fabric_port_name;
+					/* Fabric Port Name */
+	u32	rsvd:8;		/* Reserved */
+	u32	hard_addr:24;	/* Hard Address */
+};
+
+/*
+ * Fabric Config Server
+ */
+
+/*
+ * Command codes for Fabric Configuration Server
+ */
+enum {
+	GS_FC_GFN_CMD	= 0x0114,	/* GS FC Get Fabric Name  */
+	GS_FC_GMAL_CMD	= 0x0116,	/* GS FC GMAL  */
+	GS_FC_TRACE_CMD	= 0x0400,	/* GS FC Trace Route */
+	GS_FC_PING_CMD	= 0x0401,	/* GS FC Ping */
+};
+
+/*
+ * Source or Destination Port Tags.
+ */
+enum {
+	GS_FTRACE_TAG_NPORT_ID		= 1,
+	GS_FTRACE_TAG_NPORT_NAME	= 2,
+};
+
+/*
+* Port Value : Could be a Port id or wwn
+ */
+union fcgs_port_val_u{
+	u32	nport_id;
+	wwn_t		nport_wwn;
+};
+
+#define GS_FTRACE_MAX_HOP_COUNT	20
+#define GS_FTRACE_REVISION	1
+
+/*
+ * Ftrace Related Structures.
+ */
+
+/*
+ * STR (Switch Trace) Reject Reason Codes. From FC-SW.
+ */
+enum {
+	GS_FTRACE_STR_CMD_COMPLETED_SUCC	= 0,
+	GS_FTRACE_STR_CMD_NOT_SUPP_IN_NEXT_SWITCH,
+	GS_FTRACE_STR_NO_RESP_FROM_NEXT_SWITCH,
+	GS_FTRACE_STR_MAX_HOP_CNT_REACHED,
+	GS_FTRACE_STR_SRC_PORT_NOT_FOUND,
+	GS_FTRACE_STR_DST_PORT_NOT_FOUND,
+	GS_FTRACE_STR_DEVICES_NOT_IN_COMMON_ZONE,
+	GS_FTRACE_STR_NO_ROUTE_BW_PORTS,
+	GS_FTRACE_STR_NO_ADDL_EXPLN,
+	GS_FTRACE_STR_FABRIC_BUSY,
+	GS_FTRACE_STR_FABRIC_BUILD_IN_PROGRESS,
+	GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_START = 0xf0,
+	GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_END = 0xff,
+};
+
+/*
+ * Ftrace Request
+ */
+struct fcgs_ftrace_req_s{
+	u32	revision;
+	u16	src_port_tag;	/* Source Port tag */
+	u16	src_port_len;	/* Source Port len */
+	union fcgs_port_val_u src_port_val;	/* Source Port value */
+	u16	dst_port_tag;	/* Destination Port tag */
+	u16	dst_port_len;	/* Destination Port len */
+	union fcgs_port_val_u dst_port_val;	/* Destination Port value */
+	u32	token;
+	u8		vendor_id[8];	/* T10 Vendor Identifier */
+	u8		vendor_info[8];	/* Vendor specific Info */
+	u32	max_hop_cnt;	/* Max Hop Count */
+};
+
+/*
+ * Path info structure
+ */
+struct fcgs_ftrace_path_info_s{
+	wwn_t		switch_name;		/* Switch WWN */
+	u32	domain_id;
+	wwn_t		ingress_port_name;	/* Ingress ports wwn */
+	u32	ingress_phys_port_num;	/* Ingress ports physical port
+						 * number
+						 */
+	wwn_t		egress_port_name;	/* Ingress ports wwn */
+	u32	egress_phys_port_num;	/* Ingress ports physical port
+						 * number
+						 */
+};
+
+/*
+ * Ftrace Acc Response
+ */
+struct fcgs_ftrace_resp_s{
+	u32	revision;
+	u32	token;
+	u8		vendor_id[8];		/* T10 Vendor Identifier */
+	u8		vendor_info[8];		/* Vendor specific Info */
+	u32	str_rej_reason_code;	/* STR Reject Reason Code */
+	u32	num_path_info_entries;	/* No. of path info entries */
+	/*
+	 * path info entry/entries.
+	 */
+	struct fcgs_ftrace_path_info_s path_info[1];
+
+};
+
+/*
+* Fabric Config Server : FCPing
+ */
+
+/*
+ * FC Ping Request
+ */
+struct fcgs_fcping_req_s{
+	u32	revision;
+	u16	port_tag;
+	u16	port_len;	/* Port len */
+	union fcgs_port_val_u port_val;	/* Port value */
+	u32	token;
+};
+
+/*
+ * FC Ping Response
+ */
+struct fcgs_fcping_resp_s{
+	u32	token;
+};
+
+/*
+ * Command codes for zone server query.
+ */
+enum {
+	ZS_GZME = 0x0124,	/* Get zone member extended */
+};
+
+/*
+ * ZS GZME request
+ */
+#define ZS_GZME_ZNAMELEN	32
+struct zs_gzme_req_s{
+	u8	znamelen;
+	u8	rsvd[3];
+	u8	zname[ZS_GZME_ZNAMELEN];
+};
+
+enum zs_mbr_type{
+	ZS_MBR_TYPE_PWWN	= 1,
+	ZS_MBR_TYPE_DOMPORT	= 2,
+	ZS_MBR_TYPE_PORTID	= 3,
+	ZS_MBR_TYPE_NWWN	= 4,
+};
+
+struct zs_mbr_wwn_s{
+	u8	mbr_type;
+	u8	rsvd[3];
+	wwn_t	wwn;
+};
+
+struct zs_query_resp_s{
+	u32	nmbrs;	/*  number of zone members */
+	struct zs_mbr_wwn_s	mbr[1];
+};
+
+/*
+ * GMAL Command ( Get ( interconnect Element) Management Address List)
+ * To retrieve the IP Address of a Switch.
+ */
+
+#define CT_GMAL_RESP_PREFIX_TELNET	 "telnet://"
+#define CT_GMAL_RESP_PREFIX_HTTP	 "http://"
+
+/*  GMAL/GFN request */
+struct fcgs_req_s {
+	wwn_t    wwn; 	/* PWWN/NWWN */
+};
+
+#define fcgs_gmal_req_t struct fcgs_req_s
+#define fcgs_gfn_req_t struct fcgs_req_s
+
+/* Accept Response to GMAL */
+struct fcgs_gmal_resp_s {
+	u32 		ms_len;   /* Num of entries */
+	u8     	ms_ma[256];
+};
+
+struct fc_gmal_entry_s {
+	u8  len;
+	u8  prefix[7]; /* like "http://" */
+	u8  ip_addr[248];
+};
+
+#pragma pack()
+
+#endif
diff --git a/drivers/scsi/bfa/include/protocol/fc.h b/drivers/scsi/bfa/include/protocol/fc.h
new file mode 100644
index 000000000000..3e39ba58cfb5
--- /dev/null
+++ b/drivers/scsi/bfa/include/protocol/fc.h
@@ -0,0 +1,1105 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FC_H__
+#define __FC_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+/*
+ * Fibre Channel Header Structure (FCHS) definition
+ */
+struct fchs_s {
+#ifdef __BIGENDIAN
+	u32        routing:4;	/* routing bits */
+	u32        cat_info:4;	/* category info */
+#else
+	u32        cat_info:4;	/* category info */
+	u32        routing:4;	/* routing bits */
+#endif
+	u32        d_id:24;	/* destination identifier */
+
+	u32        cs_ctl:8;	/* class specific control */
+	u32        s_id:24;	/* source identifier */
+
+	u32        type:8;		/* data structure type */
+	u32        f_ctl:24;	/* initial frame control */
+
+	u8         seq_id;		/* sequence identifier */
+	u8         df_ctl;		/* data field control */
+	u16        seq_cnt;	/* sequence count */
+
+	u16        ox_id;		/* originator exchange ID */
+	u16        rx_id;		/* responder exchange ID */
+
+	u32        ro;		/* relative offset */
+};
+/*
+ * Fibre Channel BB_E Header Structure
+ */
+struct fcbbehs_s {
+	u16	ver_rsvd;
+	u32	rsvd[2];
+	u32	rsvd__sof;
+};
+
+#define FC_SEQ_ID_MAX		256
+
+/*
+ * routing bit definitions
+ */
+enum {
+	FC_RTG_FC4_DEV_DATA	= 0x0,	/* FC-4 Device Data */
+	FC_RTG_EXT_LINK		= 0x2,	/* Extended Link Data */
+	FC_RTG_FC4_LINK_DATA	= 0x3,	/* FC-4 Link Data */
+	FC_RTG_VIDEO_DATA	= 0x4,	/* Video Data */
+	FC_RTG_EXT_HDR		= 0x5,	/* VFT, IFR or Encapsuled */
+	FC_RTG_BASIC_LINK	= 0x8,	/* Basic Link data */
+	FC_RTG_LINK_CTRL	= 0xC,	/* Link Control */
+};
+
+/*
+ * information category for extended link data and FC-4 Link Data
+ */
+enum {
+	FC_CAT_LD_REQUEST	= 0x2,	/* Request */
+	FC_CAT_LD_REPLY		= 0x3,	/* Reply */
+	FC_CAT_LD_DIAG		= 0xF,	/* for DIAG use only */
+};
+
+/*
+ * information category for extended headers (VFT, IFR or encapsulation)
+ */
+enum {
+	FC_CAT_VFT_HDR = 0x0,	/* Virtual fabric tagging header */
+	FC_CAT_IFR_HDR = 0x1,	/* Inter-Fabric routing header */
+	FC_CAT_ENC_HDR = 0x2,	/* Encapsulation header */
+};
+
+/*
+ * information category for FC-4 device data
+ */
+enum {
+	FC_CAT_UNCATEG_INFO	= 0x0,	/* Uncategorized information */
+	FC_CAT_SOLICIT_DATA	= 0x1,	/* Solicited Data */
+	FC_CAT_UNSOLICIT_CTRL	= 0x2,	/* Unsolicited Control */
+	FC_CAT_SOLICIT_CTRL	= 0x3,	/* Solicited Control */
+	FC_CAT_UNSOLICIT_DATA	= 0x4,	/* Unsolicited Data */
+	FC_CAT_DATA_DESC	= 0x5,	/* Data Descriptor */
+	FC_CAT_UNSOLICIT_CMD	= 0x6,	/* Unsolicited Command */
+	FC_CAT_CMD_STATUS	= 0x7,	/* Command Status */
+};
+
+/*
+ * information category for Link Control
+ */
+enum {
+	FC_CAT_ACK_1		= 0x00,
+	FC_CAT_ACK_0_N		= 0x01,
+	FC_CAT_P_RJT		= 0x02,
+	FC_CAT_F_RJT		= 0x03,
+	FC_CAT_P_BSY		= 0x04,
+	FC_CAT_F_BSY_DATA	= 0x05,
+	FC_CAT_F_BSY_LINK_CTL	= 0x06,
+	FC_CAT_F_LCR		= 0x07,
+	FC_CAT_NTY		= 0x08,
+	FC_CAT_END		= 0x09,
+};
+
+/*
+ * Type Field Definitions. FC-PH Section 18.5 pg. 165
+ */
+enum {
+	FC_TYPE_BLS		= 0x0,	/* Basic Link Service */
+	FC_TYPE_ELS		= 0x1,	/* Extended Link Service */
+	FC_TYPE_IP		= 0x5,	/* IP */
+	FC_TYPE_FCP		= 0x8,	/* SCSI-FCP */
+	FC_TYPE_GPP		= 0x9,	/* SCSI_GPP */
+	FC_TYPE_SERVICES	= 0x20,	/* Fibre Channel Services */
+	FC_TYPE_FC_FSS		= 0x22,	/* Fabric Switch Services */
+	FC_TYPE_FC_AL		= 0x23,	/* FC-AL */
+	FC_TYPE_FC_SNMP		= 0x24,	/* FC-SNMP */
+	FC_TYPE_MAX		= 256,	/* 256 FC-4 types */
+};
+
+struct fc_fc4types_s{
+	u8         bits[FC_TYPE_MAX / 8];
+};
+
+/*
+ * Frame Control Definitions. FC-PH Table-45. pg. 168
+ */
+enum {
+	FCTL_EC_ORIG = 0x000000,	/* exchange originator */
+	FCTL_EC_RESP = 0x800000,	/* exchange responder */
+	FCTL_SEQ_INI = 0x000000,	/* sequence initiator */
+	FCTL_SEQ_REC = 0x400000,	/* sequence recipient */
+	FCTL_FS_EXCH = 0x200000,	/* first sequence of xchg */
+	FCTL_LS_EXCH = 0x100000,	/* last sequence of xchg */
+	FCTL_END_SEQ = 0x080000,	/* last frame of sequence */
+	FCTL_SI_XFER = 0x010000,	/* seq initiative transfer */
+	FCTL_RO_PRESENT = 0x000008,	/* relative offset present */
+	FCTL_FILLBYTE_MASK = 0x000003	/* , fill byte mask */
+};
+
+/*
+ * Fabric Well Known Addresses
+ */
+enum {
+	FC_MIN_WELL_KNOWN_ADDR		= 0xFFFFF0,
+	FC_DOMAIN_CONTROLLER_MASK 	= 0xFFFC00,
+	FC_ALIAS_SERVER			= 0xFFFFF8,
+	FC_MGMT_SERVER			= 0xFFFFFA,
+	FC_TIME_SERVER			= 0xFFFFFB,
+	FC_NAME_SERVER			= 0xFFFFFC,
+	FC_FABRIC_CONTROLLER		= 0xFFFFFD,
+	FC_FABRIC_PORT			= 0xFFFFFE,
+	FC_BROADCAST_SERVER		= 0xFFFFFF
+};
+
+/*
+ * domain/area/port defines
+ */
+#define FC_DOMAIN_MASK  0xFF0000
+#define FC_DOMAIN_SHIFT 16
+#define FC_AREA_MASK    0x00FF00
+#define FC_AREA_SHIFT   8
+#define FC_PORT_MASK    0x0000FF
+#define FC_PORT_SHIFT   0
+
+#define FC_GET_DOMAIN(p)	(((p) & FC_DOMAIN_MASK) >> FC_DOMAIN_SHIFT)
+#define FC_GET_AREA(p)		(((p) & FC_AREA_MASK) >> FC_AREA_SHIFT)
+#define FC_GET_PORT(p)		(((p) & FC_PORT_MASK) >> FC_PORT_SHIFT)
+
+#define FC_DOMAIN_CTRLR(p)	(FC_DOMAIN_CONTROLLER_MASK | (FC_GET_DOMAIN(p)))
+
+enum {
+	FC_RXID_ANY = 0xFFFFU,
+};
+
+/*
+ * generic ELS command
+ */
+struct fc_els_cmd_s{
+	u32        els_code:8;	/* ELS Command Code */
+	u32        reserved:24;
+};
+
+/*
+ * ELS Command Codes. FC-PH Table-75. pg. 223
+ */
+enum {
+	FC_ELS_LS_RJT = 0x1,	/* Link Service Reject. */
+	FC_ELS_ACC = 0x02,	/* Accept */
+	FC_ELS_PLOGI = 0x03,	/* N_Port Login. */
+	FC_ELS_FLOGI = 0x04,	/* F_Port Login. */
+	FC_ELS_LOGO = 0x05,	/* Logout. */
+	FC_ELS_ABTX = 0x06,	/* Abort Exchange */
+	FC_ELS_RES = 0x08,	/* Read Exchange status */
+	FC_ELS_RSS = 0x09,	/* Read sequence status block */
+	FC_ELS_RSI = 0x0A,	/* Request Sequence Initiative */
+	FC_ELS_ESTC = 0x0C,	/* Estimate Credit. */
+	FC_ELS_RTV = 0x0E,	/* Read Timeout Value. */
+	FC_ELS_RLS = 0x0F,	/* Read Link Status. */
+	FC_ELS_ECHO = 0x10,	/* Echo */
+	FC_ELS_TEST = 0x11,	/* Test */
+	FC_ELS_RRQ = 0x12,	/* Reinstate Recovery Qualifier. */
+	FC_ELS_REC = 0x13,	/* Add this for TAPE support in FCR */
+	FC_ELS_PRLI = 0x20,	/* Process Login */
+	FC_ELS_PRLO = 0x21,	/* Process Logout. */
+	FC_ELS_SCN = 0x22,	/* State Change Notification. */
+	FC_ELS_TPRLO = 0x24,	/* Third Party Process Logout. */
+	FC_ELS_PDISC = 0x50,	/* Discover N_Port Parameters. */
+	FC_ELS_FDISC = 0x51,	/* Discover F_Port Parameters. */
+	FC_ELS_ADISC = 0x52,	/* Discover Address. */
+	FC_ELS_FAN = 0x60,	/* Fabric Address Notification */
+	FC_ELS_RSCN = 0x61,	/* Reg State Change Notification */
+	FC_ELS_SCR = 0x62,	/* State Change Registration. */
+	FC_ELS_RTIN = 0x77,	/* Mangement server request */
+	FC_ELS_RNID = 0x78,	/* Mangement server request */
+	FC_ELS_RLIR = 0x79,	/* Registered Link Incident Record */
+
+	FC_ELS_RPSC = 0x7D,	/* Report Port Speed Capabilities */
+	FC_ELS_QSA = 0x7E,	/* Query Security Attributes. Ref FC-SP */
+	FC_ELS_E2E_LBEACON = 0x81,
+				/* End-to-End Link Beacon */
+	FC_ELS_AUTH = 0x90,	/* Authentication. Ref FC-SP */
+	FC_ELS_RFCN = 0x97,	/* Request Fabric Change Notification. Ref
+				 *FC-SP */
+
+};
+
+/*
+ *  Version numbers for FC-PH standards,
+ *  used in login to indicate what port
+ *  supports. See FC-PH-X table 158.
+ */
+enum {
+	FC_PH_VER_4_3 = 0x09,
+	FC_PH_VER_PH_3 = 0x20,
+};
+
+/*
+ * PDU size defines
+ */
+enum {
+	FC_MIN_PDUSZ = 512,
+	FC_MAX_PDUSZ = 2112,
+};
+
+/*
+ * N_Port PLOGI Common Service Parameters.
+ * FC-PH-x. Figure-76. pg. 308.
+ */
+struct fc_plogi_csp_s{
+	u8         verhi;	/* FC-PH high version */
+	u8         verlo;	/* FC-PH low version */
+	u16        bbcred;	/* BB_Credit */
+
+#ifdef __BIGENDIAN
+	u8         ciro:1,		/* continuously increasing RO */
+			rro:1,		/* random relative offset */
+			npiv_supp:1,	/* NPIV supported */
+			port_type:1,	/* N_Port/F_port */
+			altbbcred:1,	/* alternate BB_Credit */
+			resolution:1,	/* ms/ns ED_TOV resolution */
+			vvl_info:1,	/* VVL Info included */
+			reserved1:1;
+
+	u8         hg_supp:1,
+			query_dbc:1,
+			security:1,
+			sync_cap:1,
+			r_t_tov:1,
+			dh_dup_supp:1,
+			cisc:1,		/* continuously increasing seq count */
+			payload:1;
+#else
+	u8         reserved2:2,
+			resolution:1,	/* ms/ns ED_TOV resolution */
+			altbbcred:1,	/* alternate BB_Credit */
+			port_type:1,	/* N_Port/F_port */
+			npiv_supp:1,	/* NPIV supported */
+			rro:1,		/* random relative offset */
+			ciro:1;		/* continuously increasing RO */
+
+	u8         payload:1,
+			cisc:1,		/* continuously increasing seq count */
+			dh_dup_supp:1,
+			r_t_tov:1,
+			sync_cap:1,
+			security:1,
+			query_dbc:1,
+			hg_supp:1;
+#endif
+
+	u16        rxsz;		/* recieve data_field size */
+
+	u16        conseq;
+	u16        ro_bitmap;
+
+	u32        e_d_tov;
+};
+
+/*
+ * N_Port PLOGI Class Specific Parameters.
+ * FC-PH-x. Figure 78. pg. 318.
+ */
+struct fc_plogi_clp_s{
+#ifdef __BIGENDIAN
+	u32        class_valid:1;
+	u32        intermix:1;	/* class intermix supported if set =1.
+					 * valid only for class1. Reserved for
+					 * class2 & class3
+					 */
+	u32        reserved1:2;
+	u32        sequential:1;
+	u32        reserved2:3;
+#else
+	u32        reserved2:3;
+	u32        sequential:1;
+	u32        reserved1:2;
+	u32        intermix:1;	/* class intermix supported if set =1.
+					 * valid only for class1. Reserved for
+					 * class2 & class3
+					 */
+	u32        class_valid:1;
+#endif
+
+	u32        reserved3:24;
+
+	u32        reserved4:16;
+	u32        rxsz:16;	/* Receive data_field size */
+
+	u32        reserved5:8;
+	u32        conseq:8;
+	u32        e2e_credit:16;	/* end to end credit */
+
+	u32        reserved7:8;
+	u32        ospx:8;
+	u32        reserved8:16;
+};
+
+#define FLOGI_VVL_BRCD    0x42524344 /* ASCII value for each character in
+				      * string "BRCD" */
+
+/*
+ * PLOGI els command and reply payload
+ */
+struct fc_logi_s{
+	struct fc_els_cmd_s els_cmd;	/* ELS command code */
+	struct fc_plogi_csp_s  csp;		/* common service params */
+	wwn_t           port_name;
+	wwn_t           node_name;
+	struct fc_plogi_clp_s  class1;		/* class 1 service parameters */
+	struct fc_plogi_clp_s  class2;		/* class 2 service parameters */
+	struct fc_plogi_clp_s  class3;		/* class 3 service parameters */
+	struct fc_plogi_clp_s  class4;		/* class 4 service parameters */
+	u8         vvl[16];	/* vendor version level */
+};
+
+/*
+ * LOGO els command payload
+ */
+struct fc_logo_s{
+	struct fc_els_cmd_s    els_cmd;	/* ELS command code */
+	u32        res1:8;
+	u32        nport_id:24;	/* N_Port identifier of source */
+	wwn_t           orig_port_name;	/* Port name of the LOGO originator */
+};
+
+/*
+ * ADISC els command payload
+ */
+struct fc_adisc_s {
+	struct fc_els_cmd_s    els_cmd;	/* ELS command code */
+	u32        res1:8;
+	u32        orig_HA:24;	/* originator hard address */
+	wwn_t           orig_port_name;	/* originator port name */
+	wwn_t           orig_node_name;	/* originator node name */
+	u32        res2:8;
+	u32        nport_id:24;	/* originator NPortID */
+};
+
+/*
+ * Exchange status block
+ */
+struct fc_exch_status_blk_s{
+	u32        oxid:16;
+	u32        rxid:16;
+	u32        res1:8;
+	u32        orig_np:24;	/* originator NPortID */
+	u32        res2:8;
+	u32        resp_np:24;	/* responder NPortID */
+	u32        es_bits;
+	u32        res3;
+	/*
+	 * un modified section of the fields
+	 */
+};
+
+/*
+ * RES els command payload
+ */
+struct fc_res_s {
+	struct fc_els_cmd_s    els_cmd;	/* ELS command code */
+	u32        res1:8;
+	u32        nport_id:24;	/* N_Port identifier of source */
+	u32        oxid:16;
+	u32        rxid:16;
+	u8         assoc_hdr[32];
+};
+
+/*
+ * RES els accept payload
+ */
+struct fc_res_acc_s{
+	struct fc_els_cmd_s els_cmd;	/* ELS command code */
+	struct fc_exch_status_blk_s fc_exch_blk; /* Exchange status block */
+};
+
+/*
+ * REC els command payload
+ */
+struct fc_rec_s {
+	struct fc_els_cmd_s    els_cmd;	/* ELS command code */
+	u32        res1:8;
+	u32        nport_id:24;	/* N_Port identifier of source */
+	u32        oxid:16;
+	u32        rxid:16;
+};
+
+#define FC_REC_ESB_OWN_RSP	0x80000000	/* responder owns */
+#define FC_REC_ESB_SI		0x40000000	/* SI is owned 	*/
+#define FC_REC_ESB_COMP		0x20000000	/* exchange is complete	*/
+#define FC_REC_ESB_ENDCOND_ABN	0x10000000	/* abnormal ending 	*/
+#define FC_REC_ESB_RQACT	0x04000000	/* recovery qual active	*/
+#define FC_REC_ESB_ERRP_MSK	0x03000000
+#define FC_REC_ESB_OXID_INV	0x00800000	/* invalid OXID		*/
+#define FC_REC_ESB_RXID_INV	0x00400000	/* invalid RXID		*/
+#define FC_REC_ESB_PRIO_INUSE	0x00200000
+
+/*
+ * REC els accept payload
+ */
+struct fc_rec_acc_s {
+	struct fc_els_cmd_s    els_cmd;	/* ELS command code */
+	u32        oxid:16;
+	u32        rxid:16;
+	u32        res1:8;
+	u32        orig_id:24;	/* N_Port id of exchange originator */
+	u32        res2:8;
+	u32        resp_id:24;	/* N_Port id of exchange responder */
+	u32        count;		/* data transfer count */
+	u32        e_stat;		/* exchange status */
+};
+
+/*
+ * RSI els payload
+ */
+struct fc_rsi_s {
+	struct fc_els_cmd_s    els_cmd;
+	u32        res1:8;
+	u32        orig_sid:24;
+	u32        oxid:16;
+	u32        rxid:16;
+};
+
+/*
+ * structure for PRLI paramater pages, both request & response
+ * see FC-PH-X table 113 & 115 for explanation also FCP table 8
+ */
+struct fc_prli_params_s{
+	u32        reserved: 16;
+#ifdef __BIGENDIAN
+	u32        reserved1: 5;
+	u32        rec_support : 1;
+	u32        task_retry_id : 1;
+	u32        retry : 1;
+
+	u32        confirm : 1;
+	u32        doverlay:1;
+	u32        initiator:1;
+	u32        target:1;
+	u32        cdmix:1;
+	u32        drmix:1;
+	u32        rxrdisab:1;
+	u32        wxrdisab:1;
+#else
+	u32        retry : 1;
+	u32        task_retry_id : 1;
+	u32        rec_support : 1;
+	u32        reserved1: 5;
+
+	u32        wxrdisab:1;
+	u32        rxrdisab:1;
+	u32        drmix:1;
+	u32        cdmix:1;
+	u32        target:1;
+	u32        initiator:1;
+	u32        doverlay:1;
+	u32        confirm : 1;
+#endif
+};
+
+/*
+ * valid values for rspcode in PRLI ACC payload
+ */
+enum {
+	FC_PRLI_ACC_XQTD = 0x1,		/* request executed */
+	FC_PRLI_ACC_PREDEF_IMG = 0x5,	/* predefined image - no prli needed */
+};
+
+struct fc_prli_params_page_s{
+	u32        type:8;
+	u32        codext:8;
+#ifdef __BIGENDIAN
+	u32        origprocasv:1;
+	u32        rsppav:1;
+	u32        imagepair:1;
+	u32        reserved1:1;
+	u32        rspcode:4;
+#else
+	u32        rspcode:4;
+	u32        reserved1:1;
+	u32        imagepair:1;
+	u32        rsppav:1;
+	u32        origprocasv:1;
+#endif
+	u32        reserved2:8;
+
+	u32        origprocas;
+	u32        rspprocas;
+	struct fc_prli_params_s  servparams;
+};
+
+/*
+ * PRLI request and accept payload, FC-PH-X tables 112 & 114
+ */
+struct fc_prli_s{
+	u32        command:8;
+	u32        pglen:8;
+	u32        pagebytes:16;
+	struct fc_prli_params_page_s parampage;
+};
+
+/*
+ * PRLO logout params page
+ */
+struct fc_prlo_params_page_s{
+	u32        type:8;
+	u32        type_ext:8;
+#ifdef __BIGENDIAN
+	u32        opa_valid:1;	/* originator process associator
+					 * valid
+					 */
+	u32        rpa_valid:1;	/* responder process associator valid */
+	u32        res1:14;
+#else
+	u32        res1:14;
+	u32        rpa_valid:1;	/* responder process associator valid */
+	u32        opa_valid:1;	/* originator process associator
+					 * valid
+					 */
+#endif
+	u32        orig_process_assc;
+	u32        resp_process_assc;
+
+	u32        res2;
+};
+
+/*
+ * PRLO els command payload
+ */
+struct fc_prlo_s{
+	u32        	command:8;
+	u32        	page_len:8;
+	u32        	payload_len:16;
+	struct fc_prlo_params_page_s 	prlo_params[1];
+};
+
+/*
+ * PRLO Logout response parameter page
+ */
+struct fc_prlo_acc_params_page_s{
+	u32        type:8;
+	u32        type_ext:8;
+
+#ifdef __BIGENDIAN
+	u32        opa_valid:1;	/* originator process associator
+					 * valid
+					 */
+	u32        rpa_valid:1;	/* responder process associator valid */
+	u32        res1:14;
+#else
+	u32        res1:14;
+	u32        rpa_valid:1;	/* responder process associator valid */
+	u32        opa_valid:1;	/* originator process associator
+					 * valid
+					 */
+#endif
+	u32        orig_process_assc;
+	u32        resp_process_assc;
+
+	u32        fc4type_csp;
+};
+
+/*
+ * PRLO els command ACC payload
+ */
+struct fc_prlo_acc_s{
+	u32        command:8;
+	u32        page_len:8;
+	u32        payload_len:16;
+	struct fc_prlo_acc_params_page_s prlo_acc_params[1];
+};
+
+/*
+ * SCR els command payload
+ */
+enum {
+	FC_SCR_REG_FUNC_FABRIC_DETECTED = 0x01,
+	FC_SCR_REG_FUNC_N_PORT_DETECTED = 0x02,
+	FC_SCR_REG_FUNC_FULL = 0x03,
+	FC_SCR_REG_FUNC_CLEAR_REG = 0xFF,
+};
+
+/* SCR VU registrations */
+enum {
+	FC_VU_SCR_REG_FUNC_FABRIC_NAME_CHANGE = 0x01
+};
+
+struct fc_scr_s{
+	u32 command:8;
+	u32 res:24;
+	u32 vu_reg_func:8; /* Vendor Unique Registrations */
+	u32 res1:16;
+	u32 reg_func:8;
+};
+
+/*
+ * Information category for Basic link data
+ */
+enum {
+	FC_CAT_NOP	= 0x0,
+	FC_CAT_ABTS	= 0x1,
+	FC_CAT_RMC	= 0x2,
+	FC_CAT_BA_ACC	= 0x4,
+	FC_CAT_BA_RJT	= 0x5,
+	FC_CAT_PRMT	= 0x6,
+};
+
+/*
+ * LS_RJT els reply payload
+ */
+struct fc_ls_rjt_s {
+	struct fc_els_cmd_s    els_cmd;		/* ELS command code */
+	u32        res1:8;
+	u32        reason_code:8;		/* Reason code for reject */
+	u32        reason_code_expl:8;	/* Reason code explanation */
+	u32        vendor_unique:8;	/* Vendor specific */
+};
+
+/*
+ * LS_RJT reason codes
+ */
+enum {
+	FC_LS_RJT_RSN_INV_CMD_CODE	= 0x01,
+	FC_LS_RJT_RSN_LOGICAL_ERROR	= 0x03,
+	FC_LS_RJT_RSN_LOGICAL_BUSY	= 0x05,
+	FC_LS_RJT_RSN_PROTOCOL_ERROR	= 0x07,
+	FC_LS_RJT_RSN_UNABLE_TO_PERF_CMD = 0x09,
+	FC_LS_RJT_RSN_CMD_NOT_SUPP	= 0x0B,
+};
+
+/*
+ * LS_RJT reason code explanation
+ */
+enum {
+	FC_LS_RJT_EXP_NO_ADDL_INFO		= 0x00,
+	FC_LS_RJT_EXP_SPARMS_ERR_OPTIONS	= 0x01,
+	FC_LS_RJT_EXP_SPARMS_ERR_INI_CTL	= 0x03,
+	FC_LS_RJT_EXP_SPARMS_ERR_REC_CTL	= 0x05,
+	FC_LS_RJT_EXP_SPARMS_ERR_RXSZ		= 0x07,
+	FC_LS_RJT_EXP_SPARMS_ERR_CONSEQ		= 0x09,
+	FC_LS_RJT_EXP_SPARMS_ERR_CREDIT		= 0x0B,
+	FC_LS_RJT_EXP_INV_PORT_NAME		= 0x0D,
+	FC_LS_RJT_EXP_INV_NODE_FABRIC_NAME	= 0x0E,
+	FC_LS_RJT_EXP_INV_CSP			= 0x0F,
+	FC_LS_RJT_EXP_INV_ASSOC_HDR		= 0x11,
+	FC_LS_RJT_EXP_ASSOC_HDR_REQD		= 0x13,
+	FC_LS_RJT_EXP_INV_ORIG_S_ID		= 0x15,
+	FC_LS_RJT_EXP_INV_OXID_RXID_COMB	= 0x17,
+	FC_LS_RJT_EXP_CMD_ALREADY_IN_PROG	= 0x19,
+	FC_LS_RJT_EXP_LOGIN_REQUIRED		= 0x1E,
+	FC_LS_RJT_EXP_INVALID_NPORT_ID		= 0x1F,
+	FC_LS_RJT_EXP_INSUFF_RES		= 0x29,
+	FC_LS_RJT_EXP_CMD_NOT_SUPP		= 0x2C,
+	FC_LS_RJT_EXP_INV_PAYLOAD_LEN		= 0x2D,
+};
+
+/*
+ * RRQ els command payload
+ */
+struct fc_rrq_s{
+	struct fc_els_cmd_s    els_cmd;	/* ELS command code */
+	u32        res1:8;
+	u32        s_id:24;	/* exchange originator S_ID */
+
+	u32        ox_id:16;	/* originator exchange ID */
+	u32        rx_id:16;	/* responder exchange ID */
+
+	u32        res2[8];	/* optional association header */
+};
+
+/*
+ * ABTS BA_ACC reply payload
+ */
+struct fc_ba_acc_s{
+	u32        seq_id_valid:8;	/* set to 0x00 for Abort Exchange */
+	u32        seq_id:8;	/* invalid for Abort Exchange */
+	u32        res2:16;
+	u32        ox_id:16;	/* OX_ID from ABTS frame */
+	u32        rx_id:16;	/* RX_ID from ABTS frame */
+	u32        low_seq_cnt:16;	/* set to 0x0000 for Abort Exchange */
+	u32        high_seq_cnt:16;/* set to 0xFFFF for Abort Exchange */
+};
+
+/*
+ * ABTS BA_RJT reject payload
+ */
+struct fc_ba_rjt_s{
+	u32        res1:8;		/* Reserved */
+	u32        reason_code:8;	/* reason code for reject */
+	u32        reason_expl:8;	/* reason code explanation */
+	u32        vendor_unique:8;/* vendor unique reason code,set to 0 */
+};
+
+/*
+ * TPRLO logout parameter page
+ */
+struct fc_tprlo_params_page_s{
+	u32        type:8;
+	u32        type_ext:8;
+
+#ifdef __BIGENDIAN
+	u32        opa_valid:1;
+	u32        rpa_valid:1;
+	u32        tpo_nport_valid:1;
+	u32        global_process_logout:1;
+	u32        res1:12;
+#else
+	u32        res1:12;
+	u32        global_process_logout:1;
+	u32        tpo_nport_valid:1;
+	u32        rpa_valid:1;
+	u32        opa_valid:1;
+#endif
+
+	u32        orig_process_assc;
+	u32        resp_process_assc;
+
+	u32        res2:8;
+	u32        tpo_nport_id;
+};
+
+/*
+ * TPRLO ELS command payload
+ */
+struct fc_tprlo_s{
+	u32        command:8;
+	u32        page_len:8;
+	u32        payload_len:16;
+
+	struct fc_tprlo_params_page_s tprlo_params[1];
+};
+
+enum fc_tprlo_type{
+	FC_GLOBAL_LOGO = 1,
+	FC_TPR_LOGO
+};
+
+/*
+ * TPRLO els command ACC payload
+ */
+struct fc_tprlo_acc_s{
+	u32	command:8;
+	u32	page_len:8;
+	u32	payload_len:16;
+	struct fc_prlo_acc_params_page_s tprlo_acc_params[1];
+};
+
+/*
+ * RSCN els command req payload
+ */
+#define FC_RSCN_PGLEN	0x4
+
+enum fc_rscn_format{
+	FC_RSCN_FORMAT_PORTID	= 0x0,
+	FC_RSCN_FORMAT_AREA	= 0x1,
+	FC_RSCN_FORMAT_DOMAIN	= 0x2,
+	FC_RSCN_FORMAT_FABRIC	= 0x3,
+};
+
+struct fc_rscn_event_s{
+	u32        format:2;
+	u32        qualifier:4;
+	u32        resvd:2;
+	u32        portid:24;
+};
+
+struct fc_rscn_pl_s{
+	u8         command;
+	u8         pagelen;
+	u16        payldlen;
+	struct fc_rscn_event_s event[1];
+};
+
+/*
+ * ECHO els command req payload
+ */
+struct fc_echo_s {
+	struct fc_els_cmd_s    els_cmd;
+};
+
+/*
+ * RNID els command
+ */
+
+#define RNID_NODEID_DATA_FORMAT_COMMON    		 0x00
+#define RNID_NODEID_DATA_FORMAT_FCP3        		 0x08
+#define RNID_NODEID_DATA_FORMAT_DISCOVERY     		0xDF
+
+#define RNID_ASSOCIATED_TYPE_UNKNOWN                    0x00000001
+#define RNID_ASSOCIATED_TYPE_OTHER                      0x00000002
+#define RNID_ASSOCIATED_TYPE_HUB                        0x00000003
+#define RNID_ASSOCIATED_TYPE_SWITCH                     0x00000004
+#define RNID_ASSOCIATED_TYPE_GATEWAY                    0x00000005
+#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE             0x00000009
+#define RNID_ASSOCIATED_TYPE_HOST                       0x0000000A
+#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM          0x0000000B
+#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE      0x0000000E
+#define RNID_ASSOCIATED_TYPE_NAS_SERVER                 0x00000011
+#define RNID_ASSOCIATED_TYPE_BRIDGE                     0x00000002
+#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE      0x00000003
+#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE      0x000000FF
+
+/*
+ * RNID els command payload
+ */
+struct fc_rnid_cmd_s{
+	struct fc_els_cmd_s    els_cmd;
+	u32        node_id_data_format:8;
+	u32        reserved:24;
+};
+
+/*
+ * RNID els response payload
+ */
+
+struct fc_rnid_common_id_data_s{
+	wwn_t           port_name;
+	wwn_t           node_name;
+};
+
+struct fc_rnid_general_topology_data_s{
+	u32        vendor_unique[4];
+	u32        asso_type;
+	u32        phy_port_num;
+	u32        num_attached_nodes;
+	u32        node_mgmt:8;
+	u32        ip_version:8;
+	u32        udp_tcp_port_num:16;
+	u32        ip_address[4];
+	u32        reserved:16;
+	u32        vendor_specific:16;
+};
+
+struct fc_rnid_acc_s{
+	struct fc_els_cmd_s    els_cmd;
+	u32        node_id_data_format:8;
+	u32        common_id_data_length:8;
+	u32        reserved:8;
+	u32        specific_id_data_length:8;
+	struct fc_rnid_common_id_data_s common_id_data;
+	struct fc_rnid_general_topology_data_s gen_topology_data;
+};
+
+#define RNID_ASSOCIATED_TYPE_UNKNOWN                    0x00000001
+#define RNID_ASSOCIATED_TYPE_OTHER                      0x00000002
+#define RNID_ASSOCIATED_TYPE_HUB                        0x00000003
+#define RNID_ASSOCIATED_TYPE_SWITCH                     0x00000004
+#define RNID_ASSOCIATED_TYPE_GATEWAY                    0x00000005
+#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE             0x00000009
+#define RNID_ASSOCIATED_TYPE_HOST                       0x0000000A
+#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM          0x0000000B
+#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE      0x0000000E
+#define RNID_ASSOCIATED_TYPE_NAS_SERVER                 0x00000011
+#define RNID_ASSOCIATED_TYPE_BRIDGE                     0x00000002
+#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE      0x00000003
+#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE      0x000000FF
+
+enum fc_rpsc_speed_cap{
+	RPSC_SPEED_CAP_1G = 0x8000,
+	RPSC_SPEED_CAP_2G = 0x4000,
+	RPSC_SPEED_CAP_4G = 0x2000,
+	RPSC_SPEED_CAP_10G = 0x1000,
+	RPSC_SPEED_CAP_8G = 0x0800,
+	RPSC_SPEED_CAP_16G = 0x0400,
+
+	RPSC_SPEED_CAP_UNKNOWN = 0x0001,
+};
+
+enum fc_rpsc_op_speed_s{
+	RPSC_OP_SPEED_1G = 0x8000,
+	RPSC_OP_SPEED_2G = 0x4000,
+	RPSC_OP_SPEED_4G = 0x2000,
+	RPSC_OP_SPEED_10G = 0x1000,
+	RPSC_OP_SPEED_8G = 0x0800,
+	RPSC_OP_SPEED_16G = 0x0400,
+
+	RPSC_OP_SPEED_NOT_EST = 0x0001,	/*! speed not established */
+};
+
+struct fc_rpsc_speed_info_s{
+	u16        port_speed_cap;	/*! see fc_rpsc_speed_cap_t */
+	u16        port_op_speed;	/*! see fc_rpsc_op_speed_t */
+};
+
+enum link_e2e_beacon_subcmd{
+	LINK_E2E_BEACON_ON = 1,
+	LINK_E2E_BEACON_OFF = 2
+};
+
+enum beacon_type{
+	BEACON_TYPE_NORMAL	= 1,	/*! Normal Beaconing. Green */
+	BEACON_TYPE_WARN	= 2,	/*! Warning Beaconing. Yellow/Amber */
+	BEACON_TYPE_CRITICAL	= 3	/*! Critical Beaconing. Red */
+};
+
+struct link_e2e_beacon_param_s {
+	u8         beacon_type;	/* Beacon Type. See beacon_type_t */
+	u8         beacon_frequency;
+					/* Beacon frequency. Number of blinks
+					 * per 10 seconds
+					 */
+	u16        beacon_duration;/* Beacon duration (in Seconds). The
+					 * command operation should be
+					 * terminated at the end of this
+					 * timeout value.
+					 *
+					 * Ignored if diag_sub_cmd is
+					 * LINK_E2E_BEACON_OFF.
+					 *
+					 * If 0, beaconing will continue till a
+					 * BEACON OFF request is received
+					 */
+};
+
+/*
+ * Link E2E beacon request/good response format. For LS_RJTs use fc_ls_rjt_t
+ */
+struct link_e2e_beacon_req_s{
+	u32        ls_code;	/*! FC_ELS_E2E_LBEACON in requests *
+					 *or FC_ELS_ACC in good replies */
+	u32        ls_sub_cmd;	/*! See link_e2e_beacon_subcmd_t */
+	struct link_e2e_beacon_param_s beacon_parm;
+};
+
+/**
+ * If RPSC request is sent to the Domain Controller, the request is for
+ * all the ports within that domain (TODO - I don't think FOS implements
+ * this...).
+ */
+struct fc_rpsc_cmd_s{
+	struct fc_els_cmd_s    els_cmd;
+};
+
+/*
+ * RPSC Acc
+ */
+struct fc_rpsc_acc_s{
+	u32        command:8;
+	u32        rsvd:8;
+	u32        num_entries:16;
+
+	struct fc_rpsc_speed_info_s speed_info[1];
+};
+
+/**
+ * If RPSC2 request is sent to the Domain Controller,
+ */
+#define FC_BRCD_TOKEN    0x42524344
+
+struct fc_rpsc2_cmd_s{
+	struct fc_els_cmd_s    els_cmd;
+	u32       	token;
+	u16     	resvd;
+	u16     	num_pids;       /* Number of pids in the request */
+	struct  {
+		u32	rsvd1:8;
+		u32	pid:24;	/* port identifier */
+	} pid_list[1];
+};
+
+enum fc_rpsc2_port_type{
+	RPSC2_PORT_TYPE_UNKNOWN = 0,
+	RPSC2_PORT_TYPE_NPORT   = 1,
+	RPSC2_PORT_TYPE_NLPORT  = 2,
+	RPSC2_PORT_TYPE_NPIV_PORT  = 0x5f,
+	RPSC2_PORT_TYPE_NPORT_TRUNK  = 0x6f,
+};
+
+/*
+ * RPSC2 portInfo entry structure
+ */
+struct fc_rpsc2_port_info_s{
+    u32    pid;        /* PID */
+    u16    resvd1;
+    u16    index;      /* port number / index */
+    u8     resvd2;
+    u8    	type;        /* port type N/NL/... */
+    u16    speed;      /* port Operating Speed */
+};
+
+/*
+ * RPSC2 Accept payload
+ */
+struct fc_rpsc2_acc_s{
+	u8        els_cmd;
+	u8        resvd;
+	u16       num_pids;  /* Number of pids in the request */
+	struct fc_rpsc2_port_info_s  port_info[1];    /* port information */
+};
+
+/**
+ * bit fields so that multiple classes can be specified
+ */
+enum fc_cos{
+	FC_CLASS_2	= 0x04,
+	FC_CLASS_3	= 0x08,
+	FC_CLASS_2_3	= 0x0C,
+};
+
+/*
+ * symbolic name
+ */
+struct fc_symname_s{
+	u8         symname[FC_SYMNAME_MAX];
+};
+
+struct fc_alpabm_s{
+	u8         alpa_bm[FC_ALPA_MAX / 8];
+};
+
+/*
+ * protocol default timeout values
+ */
+#define FC_ED_TOV		2
+#define FC_REC_TOV		(FC_ED_TOV + 1)
+#define FC_RA_TOV		10
+#define FC_ELS_TOV		(2 * FC_RA_TOV)
+
+/*
+ * virtual fabric related defines
+ */
+#define FC_VF_ID_NULL    0	/*  must not be used as VF_ID */
+#define FC_VF_ID_MIN     1
+#define FC_VF_ID_MAX     0xEFF
+#define FC_VF_ID_CTL     0xFEF	/*  control VF_ID */
+
+/**
+ * Virtual Fabric Tagging header format
+ * @caution This is defined only in BIG ENDIAN format.
+ */
+struct fc_vft_s{
+	u32        r_ctl:8;
+	u32        ver:2;
+	u32        type:4;
+	u32        res_a:2;
+	u32        priority:3;
+	u32        vf_id:12;
+	u32        res_b:1;
+	u32        hopct:8;
+	u32        res_c:24;
+};
+
+#pragma pack()
+
+#endif
diff --git a/drivers/scsi/bfa/include/protocol/fc_sp.h b/drivers/scsi/bfa/include/protocol/fc_sp.h
new file mode 100644
index 000000000000..55bb0b31d04b
--- /dev/null
+++ b/drivers/scsi/bfa/include/protocol/fc_sp.h
@@ -0,0 +1,224 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FC_SP_H__
+#define __FC_SP_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+enum auth_els_flags{
+	FC_AUTH_ELS_MORE_FRAGS_FLAG 	= 0x80,	/*! bit-7. More Fragments
+						 * Follow
+						 */
+	FC_AUTH_ELS_CONCAT_FLAG 	= 0x40,	/*! bit-6. Concatenation Flag */
+	FC_AUTH_ELS_SEQ_NUM_FLAG 	= 0x01 	/*! bit-0. Sequence Number */
+};
+
+enum auth_msg_codes{
+	FC_AUTH_MC_AUTH_RJT		= 0x0A,	/*! Auth Reject */
+	FC_AUTH_MC_AUTH_NEG 		= 0x0B, /*! Auth Negotiate */
+	FC_AUTH_MC_AUTH_DONE 		= 0x0C, /*! Auth Done */
+
+	FC_AUTH_MC_DHCHAP_CHAL 		= 0x10, /*! DHCHAP Challenge */
+	FC_AUTH_MC_DHCHAP_REPLY 	= 0x11, /*! DHCHAP Reply */
+	FC_AUTH_MC_DHCHAP_SUCC 		= 0x12, /*! DHCHAP Success */
+
+	FC_AUTH_MC_FCAP_REQ 		= 0x13, /*! FCAP Request */
+	FC_AUTH_MC_FCAP_ACK 		= 0x14, /*! FCAP Acknowledge */
+	FC_AUTH_MC_FCAP_CONF 		= 0x15, /*! FCAP Confirm */
+
+	FC_AUTH_MC_FCPAP_INIT 		= 0x16, /*! FCPAP Init */
+	FC_AUTH_MC_FCPAP_ACC 		= 0x17, /*! FCPAP Accept */
+	FC_AUTH_MC_FCPAP_COMP 		= 0x18, /*! FCPAP Complete */
+
+	FC_AUTH_MC_IKE_SA_INIT 		= 0x22, /*! IKE SA INIT */
+	FC_AUTH_MC_IKE_SA_AUTH 		= 0x23, /*! IKE SA Auth */
+	FC_AUTH_MC_IKE_CREATE_CHILD_SA	= 0x24, /*! IKE Create Child SA */
+	FC_AUTH_MC_IKE_INFO 		= 0x25, /*! IKE informational */
+};
+
+enum auth_proto_version{
+	FC_AUTH_PROTO_VER_1 	= 1,	/*! Protocol Version 1 */
+};
+
+enum {
+	FC_AUTH_ELS_COMMAND_CODE = 0x90,/*! Authentication ELS Command code  */
+	FC_AUTH_PROTO_PARAM_LEN_SZ = 4,	/*! Size of Proto Parameter Len Field */
+	FC_AUTH_PROTO_PARAM_VAL_SZ = 4,	/*! Size of Proto Parameter Val Field */
+	FC_MAX_AUTH_SECRET_LEN     = 256,
+					/*! Maximum secret string length */
+	FC_AUTH_NUM_USABLE_PROTO_LEN_SZ = 4,
+					/*! Size of usable protocols field */
+	FC_AUTH_RESP_VALUE_LEN_SZ	= 4,
+					/*! Size of response value length */
+	FC_MAX_CHAP_KEY_LEN	= 256,	/*! Maximum md5 digest length */
+	FC_MAX_AUTH_RETRIES     = 3,	/*! Maximum number of retries */
+	FC_MD5_DIGEST_LEN       = 16,	/*! MD5 digest length */
+	FC_SHA1_DIGEST_LEN      = 20,	/*! SHA1 digest length */
+	FC_MAX_DHG_SUPPORTED    = 1,	/*! Maximum DH Groups supported */
+	FC_MAX_ALG_SUPPORTED    = 1,	/*! Maximum algorithms supported */
+	FC_MAX_PROTO_SUPPORTED  = 1,	/*! Maximum protocols supported */
+	FC_START_TXN_ID         = 2,	/*! Starting transaction ID */
+};
+
+enum auth_proto_id{
+	FC_AUTH_PROTO_DHCHAP		= 0x00000001,
+	FC_AUTH_PROTO_FCAP 		= 0x00000002,
+	FC_AUTH_PROTO_FCPAP 		= 0x00000003,
+	FC_AUTH_PROTO_IKEv2 		= 0x00000004,
+	FC_AUTH_PROTO_IKEv2_AUTH 	= 0x00000005,
+};
+
+struct auth_name_s{
+	u16	name_tag;	/*! Name Tag = 1 for Authentication */
+	u16	name_len;	/*! Name Length = 8 for Authentication
+					 */
+	wwn_t		name;  		/*! Name. TODO - is this PWWN */
+};
+
+
+enum auth_hash_func{
+	FC_AUTH_HASH_FUNC_MD5 		= 0x00000005,
+	FC_AUTH_HASH_FUNC_SHA_1 	= 0x00000006,
+};
+
+enum auth_dh_gid{
+	FC_AUTH_DH_GID_0_DHG_NULL	= 0x00000000,
+	FC_AUTH_DH_GID_1_DHG_1024	= 0x00000001,
+	FC_AUTH_DH_GID_2_DHG_1280	= 0x00000002,
+	FC_AUTH_DH_GID_3_DHG_1536	= 0x00000003,
+	FC_AUTH_DH_GID_4_DHG_2048	= 0x00000004,
+	FC_AUTH_DH_GID_6_DHG_3072	= 0x00000006,
+	FC_AUTH_DH_GID_7_DHG_4096	= 0x00000007,
+	FC_AUTH_DH_GID_8_DHG_6144	= 0x00000008,
+	FC_AUTH_DH_GID_9_DHG_8192	= 0x00000009,
+};
+
+struct auth_els_msg_s {
+	u8		auth_els_code;	/*  Authentication ELS Code (0x90) */
+	u8 	auth_els_flag; 	/*  Authentication ELS Flags */
+	u8 	auth_msg_code; 	/*  Authentication Message Code */
+	u8 	proto_version; 	/*  Protocol Version */
+	u32	msg_len; 	/*  Message Length */
+	u32	trans_id; 	/*  Transaction Identifier (T_ID) */
+
+	/* Msg payload follows... */
+};
+
+
+enum auth_neg_param_tags {
+	FC_AUTH_NEG_DHCHAP_HASHLIST 	= 0x0001,
+	FC_AUTH_NEG_DHCHAP_DHG_ID_LIST 	= 0x0002,
+};
+
+
+struct dhchap_param_format_s {
+	u16	tag;		/*! Parameter Tag. See
+					 * auth_neg_param_tags_t
+					 */
+	u16	word_cnt;
+
+	/* followed by variable length parameter value... */
+};
+
+struct auth_proto_params_s {
+	u32	proto_param_len;
+	u32	proto_id;
+
+	/*
+	 * Followed by variable length Protocol specific parameters. DH-CHAP
+	 * uses dhchap_param_format_t
+	 */
+};
+
+struct auth_neg_msg_s {
+	struct auth_name_s	auth_ini_name;
+	u32		usable_auth_protos;
+	struct auth_proto_params_s proto_params[1]; /*! (1..usable_auth_proto)
+						     * protocol params
+						     */
+};
+
+struct auth_dh_val_s {
+	u32 dh_val_len;
+	u32 dh_val[1];
+};
+
+struct auth_dhchap_chal_msg_s {
+	struct auth_els_msg_s	hdr;
+	struct auth_name_s auth_responder_name;	/* TODO VRK - is auth_name_t
+						 * type OK?
+						 */
+	u32 	hash_id;
+	u32 	dh_grp_id;
+	u32 	chal_val_len;
+	char		chal_val[1];
+
+	/* ...followed by variable Challenge length/value and DH length/value */
+};
+
+
+enum auth_rjt_codes {
+	FC_AUTH_RJT_CODE_AUTH_FAILURE 	= 0x01,
+	FC_AUTH_RJT_CODE_LOGICAL_ERR	= 0x02,
+};
+
+enum auth_rjt_code_exps {
+	FC_AUTH_CEXP_AUTH_MECH_NOT_USABLE	= 0x01,
+	FC_AUTH_CEXP_DH_GROUP_NOT_USABLE 	= 0x02,
+	FC_AUTH_CEXP_HASH_FUNC_NOT_USABLE 	= 0x03,
+	FC_AUTH_CEXP_AUTH_XACT_STARTED		= 0x04,
+	FC_AUTH_CEXP_AUTH_FAILED 		= 0x05,
+	FC_AUTH_CEXP_INCORRECT_PLD 		= 0x06,
+	FC_AUTH_CEXP_INCORRECT_PROTO_MSG 	= 0x07,
+	FC_AUTH_CEXP_RESTART_AUTH_PROTO 	= 0x08,
+	FC_AUTH_CEXP_AUTH_CONCAT_NOT_SUPP 	= 0x09,
+	FC_AUTH_CEXP_PROTO_VER_NOT_SUPP 	= 0x0A,
+};
+
+enum auth_status {
+	FC_AUTH_STATE_INPROGRESS = 0, 	/*! authentication in progress 	*/
+	FC_AUTH_STATE_FAILED	= 1, 	/*! authentication failed */
+	FC_AUTH_STATE_SUCCESS	= 2 	/*! authentication successful	*/
+};
+
+struct auth_rjt_msg_s {
+	struct auth_els_msg_s	hdr;
+	u8		reason_code;
+	u8		reason_code_exp;
+	u8		rsvd[2];
+};
+
+
+struct auth_dhchap_neg_msg_s {
+	struct auth_els_msg_s hdr;
+	struct auth_neg_msg_s nego;
+};
+
+struct auth_dhchap_reply_msg_s {
+	struct auth_els_msg_s	hdr;
+
+	/*
+	 * followed by response value length & Value + DH Value Length & Value
+	 */
+};
+
+#pragma pack()
+
+#endif /* __FC_SP_H__ */
diff --git a/drivers/scsi/bfa/include/protocol/fcp.h b/drivers/scsi/bfa/include/protocol/fcp.h
new file mode 100644
index 000000000000..9ade68ad2853
--- /dev/null
+++ b/drivers/scsi/bfa/include/protocol/fcp.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FCPPROTO_H__
+#define __FCPPROTO_H__
+
+#include <protocol/scsi.h>
+
+#pragma pack(1)
+
+enum {
+	FCP_RJT		= 0x01000000,	/* SRR reject */
+	FCP_SRR_ACCEPT	= 0x02000000,	/* SRR accept */
+	FCP_SRR		= 0x14000000,	/* Sequence Retransmission Request */
+};
+
+/*
+ * SRR FC-4 LS payload
+ */
+struct fc_srr_s{
+	u32	ls_cmd;
+	u32        ox_id:16;	/* ox-id */
+	u32        rx_id:16;	/* rx-id */
+	u32        ro;		/* relative offset */
+	u32        r_ctl:8;		/* R_CTL for I.U. */
+	u32        res:24;
+};
+
+
+/*
+ * FCP_CMND definitions
+ */
+#define FCP_CMND_CDB_LEN    16
+#define FCP_CMND_LUN_LEN    8
+
+struct fcp_cmnd_s{
+	lun_t           lun;		/* 64-bit LU number */
+	u8         crn;		/* command reference number */
+#ifdef __BIGENDIAN
+	u8         resvd:1,
+			priority:4,	/* FCP-3: SAM-3 priority */
+			taskattr:3;	/* scsi task attribute */
+#else
+	u8         taskattr:3,	/* scsi task attribute */
+			priority:4,	/* FCP-3: SAM-3 priority */
+			resvd:1;
+#endif
+	u8         tm_flags;	/* task management flags */
+#ifdef __BIGENDIAN
+	u8         addl_cdb_len:6,	/* additional CDB length words */
+			iodir:2;	/* read/write FCP_DATA IUs */
+#else
+	u8         iodir:2,	/* read/write FCP_DATA IUs */
+			addl_cdb_len:6;	/* additional CDB length */
+#endif
+	struct scsi_cdb_s      cdb;
+
+	/*
+	 * !!! additional cdb bytes follows here!!!
+	 */
+	u32        fcp_dl;	/* bytes to be transferred */
+};
+
+#define fcp_cmnd_cdb_len(_cmnd) ((_cmnd)->addl_cdb_len * 4 + FCP_CMND_CDB_LEN)
+#define fcp_cmnd_fcpdl(_cmnd)	((&(_cmnd)->fcp_dl)[(_cmnd)->addl_cdb_len])
+
+/*
+ * fcp_cmnd_t.iodir field values
+ */
+enum fcp_iodir{
+	FCP_IODIR_NONE	= 0,
+	FCP_IODIR_WRITE = 1,
+	FCP_IODIR_READ	= 2,
+	FCP_IODIR_RW	= 3,
+};
+
+/*
+ * Task attribute field
+ */
+enum {
+	FCP_TASK_ATTR_SIMPLE	= 0,
+	FCP_TASK_ATTR_HOQ	= 1,
+	FCP_TASK_ATTR_ORDERED	= 2,
+	FCP_TASK_ATTR_ACA	= 4,
+	FCP_TASK_ATTR_UNTAGGED	= 5,	/* obsolete in FCP-3 */
+};
+
+/*
+ * Task management flags field - only one bit shall be set
+ */
+#ifndef BIT
+#define BIT(_x)	(1 << (_x))
+#endif
+enum fcp_tm_cmnd{
+	FCP_TM_ABORT_TASK_SET	= BIT(1),
+	FCP_TM_CLEAR_TASK_SET	= BIT(2),
+	FCP_TM_LUN_RESET	= BIT(4),
+	FCP_TM_TARGET_RESET	= BIT(5),	/* obsolete in FCP-3 */
+	FCP_TM_CLEAR_ACA	= BIT(6),
+};
+
+/*
+ * FCP_XFER_RDY IU defines
+ */
+struct fcp_xfer_rdy_s{
+	u32        data_ro;
+	u32        burst_len;
+	u32        reserved;
+};
+
+/*
+ * FCP_RSP residue flags
+ */
+enum fcp_residue{
+	FCP_NO_RESIDUE = 0,	/* no residue */
+	FCP_RESID_OVER = 1,	/* more data left that was not sent */
+	FCP_RESID_UNDER = 2,	/* less data than requested */
+};
+
+enum {
+	FCP_RSPINFO_GOOD = 0,
+	FCP_RSPINFO_DATALEN_MISMATCH = 1,
+	FCP_RSPINFO_CMND_INVALID = 2,
+	FCP_RSPINFO_ROLEN_MISMATCH = 3,
+	FCP_RSPINFO_TM_NOT_SUPP = 4,
+	FCP_RSPINFO_TM_FAILED = 5,
+};
+
+struct fcp_rspinfo_s{
+	u32        res0:24;
+	u32        rsp_code:8;	/* response code (as above) */
+	u32        res1;
+};
+
+struct fcp_resp_s{
+	u32        reserved[2];	/* 2 words reserved */
+	u16        reserved2;
+#ifdef __BIGENDIAN
+	u8         reserved3:3;
+	u8         fcp_conf_req:1;	/* FCP_CONF is requested */
+	u8         resid_flags:2;	/* underflow/overflow */
+	u8         sns_len_valid:1;/* sense len is valid */
+	u8         rsp_len_valid:1;/* response len is valid */
+#else
+	u8         rsp_len_valid:1;/* response len is valid */
+	u8         sns_len_valid:1;/* sense len is valid */
+	u8         resid_flags:2;	/* underflow/overflow */
+	u8         fcp_conf_req:1;	/* FCP_CONF is requested */
+	u8         reserved3:3;
+#endif
+	u8         scsi_status;	/* one byte SCSI status */
+	u32        residue;	/* residual data bytes */
+	u32        sns_len;	/* length od sense info */
+	u32        rsp_len;	/* length of response info */
+};
+
+#define fcp_snslen(__fcprsp)	((__fcprsp)->sns_len_valid ? 		\
+					(__fcprsp)->sns_len : 0)
+#define fcp_rsplen(__fcprsp)	((__fcprsp)->rsp_len_valid ? 		\
+					(__fcprsp)->rsp_len : 0)
+#define fcp_rspinfo(__fcprsp)	((struct fcp_rspinfo_s *)((__fcprsp) + 1))
+#define fcp_snsinfo(__fcprsp)	(((u8 *)fcp_rspinfo(__fcprsp)) + 	\
+						fcp_rsplen(__fcprsp))
+
+struct fcp_cmnd_fr_s{
+	struct fchs_s          fchs;
+	struct fcp_cmnd_s      fcp;
+};
+
+#pragma pack()
+
+#endif
diff --git a/drivers/scsi/bfa/include/protocol/fdmi.h b/drivers/scsi/bfa/include/protocol/fdmi.h
new file mode 100644
index 000000000000..6c05c268c71b
--- /dev/null
+++ b/drivers/scsi/bfa/include/protocol/fdmi.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FDMI_H__
+#define __FDMI_H__
+
+#include <protocol/types.h>
+#include <protocol/fc.h>
+#include <protocol/ct.h>
+
+#pragma pack(1)
+
+/*
+ * FDMI Command Codes
+ */
+#define	FDMI_GRHL		0x0100
+#define	FDMI_GHAT		0x0101
+#define	FDMI_GRPL		0x0102
+#define	FDMI_GPAT		0x0110
+#define	FDMI_RHBA		0x0200
+#define	FDMI_RHAT		0x0201
+#define	FDMI_RPRT		0x0210
+#define	FDMI_RPA		0x0211
+#define	FDMI_DHBA		0x0300
+#define	FDMI_DPRT		0x0310
+
+/*
+ * FDMI reason codes
+ */
+#define	FDMI_NO_ADDITIONAL_EXP		0x00
+#define	FDMI_HBA_ALREADY_REG		0x10
+#define	FDMI_HBA_ATTRIB_NOT_REG		0x11
+#define	FDMI_HBA_ATTRIB_MULTIPLE	0x12
+#define	FDMI_HBA_ATTRIB_LENGTH_INVALID	0x13
+#define	FDMI_HBA_ATTRIB_NOT_PRESENT	0x14
+#define	FDMI_PORT_ORIG_NOT_IN_LIST	0x15
+#define	FDMI_PORT_HBA_NOT_IN_LIST	0x16
+#define	FDMI_PORT_ATTRIB_NOT_REG	0x20
+#define	FDMI_PORT_NOT_REG		0x21
+#define	FDMI_PORT_ATTRIB_MULTIPLE	0x22
+#define	FDMI_PORT_ATTRIB_LENGTH_INVALID	0x23
+#define	FDMI_PORT_ALREADY_REGISTEREED	0x24
+
+/*
+ * FDMI Transmission Speed Mask values
+ */
+#define	FDMI_TRANS_SPEED_1G		0x00000001
+#define	FDMI_TRANS_SPEED_2G		0x00000002
+#define	FDMI_TRANS_SPEED_10G		0x00000004
+#define	FDMI_TRANS_SPEED_4G		0x00000008
+#define	FDMI_TRANS_SPEED_8G		0x00000010
+#define	FDMI_TRANS_SPEED_16G		0x00000020
+#define	FDMI_TRANS_SPEED_UNKNOWN	0x00008000
+
+/*
+ * FDMI HBA attribute types
+ */
+enum fdmi_hba_attribute_type {
+	FDMI_HBA_ATTRIB_NODENAME = 1,	/* 0x0001 */
+	FDMI_HBA_ATTRIB_MANUFACTURER,	/* 0x0002 */
+	FDMI_HBA_ATTRIB_SERIALNUM,	/* 0x0003 */
+	FDMI_HBA_ATTRIB_MODEL,		/* 0x0004 */
+	FDMI_HBA_ATTRIB_MODEL_DESC,	/* 0x0005 */
+	FDMI_HBA_ATTRIB_HW_VERSION,	/* 0x0006 */
+	FDMI_HBA_ATTRIB_DRIVER_VERSION,	/* 0x0007 */
+	FDMI_HBA_ATTRIB_ROM_VERSION,	/* 0x0008 */
+	FDMI_HBA_ATTRIB_FW_VERSION,	/* 0x0009 */
+	FDMI_HBA_ATTRIB_OS_NAME,	/* 0x000A */
+	FDMI_HBA_ATTRIB_MAX_CT,		/* 0x000B */
+
+	FDMI_HBA_ATTRIB_MAX_TYPE
+};
+
+/*
+ * FDMI Port attribute types
+ */
+enum fdmi_port_attribute_type {
+	FDMI_PORT_ATTRIB_FC4_TYPES = 1,	/* 0x0001 */
+	FDMI_PORT_ATTRIB_SUPP_SPEED,	/* 0x0002 */
+	FDMI_PORT_ATTRIB_PORT_SPEED,	/* 0x0003 */
+	FDMI_PORT_ATTRIB_FRAME_SIZE,	/* 0x0004 */
+	FDMI_PORT_ATTRIB_DEV_NAME,	/* 0x0005 */
+	FDMI_PORT_ATTRIB_HOST_NAME,	/* 0x0006 */
+
+	FDMI_PORT_ATTR_MAX_TYPE
+};
+
+/*
+ * FDMI attribute
+ */
+struct fdmi_attr_s {
+	u16        type;
+	u16        len;
+	u8         value[1];
+};
+
+/*
+ * HBA Attribute Block
+ */
+struct fdmi_hba_attr_s {
+	u32        attr_count;	/* # of attributes */
+	struct fdmi_attr_s     hba_attr;	/* n attributes */
+};
+
+/*
+ * Registered Port List
+ */
+struct fdmi_port_list_s {
+	u32        num_ports;	/* number Of Port Entries */
+	wwn_t           port_entry;	/* one or more */
+};
+
+/*
+ * Port Attribute Block
+ */
+struct fdmi_port_attr_s {
+	u32        attr_count;	/* # of attributes */
+	struct fdmi_attr_s     port_attr;	/* n attributes */
+};
+
+/*
+ * FDMI Register HBA Attributes
+ */
+struct fdmi_rhba_s {
+	wwn_t           hba_id;		/* HBA Identifier */
+	struct fdmi_port_list_s port_list;	/* Registered Port List */
+	struct fdmi_hba_attr_s hba_attr_blk;	/* HBA attribute block */
+};
+
+/*
+ * FDMI Register Port
+ */
+struct fdmi_rprt_s {
+	wwn_t           hba_id;		/* HBA Identifier */
+	wwn_t           port_name;	/* Port wwn */
+	struct fdmi_port_attr_s port_attr_blk;	/* Port Attr Block */
+};
+
+/*
+ * FDMI Register Port Attributes
+ */
+struct fdmi_rpa_s {
+	wwn_t           port_name;	/* port wwn */
+	struct fdmi_port_attr_s port_attr_blk;	/* Port Attr Block */
+};
+
+#pragma pack()
+
+#endif
diff --git a/drivers/scsi/bfa/include/protocol/pcifw.h b/drivers/scsi/bfa/include/protocol/pcifw.h
new file mode 100644
index 000000000000..6830dc3ee58a
--- /dev/null
+++ b/drivers/scsi/bfa/include/protocol/pcifw.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  pcifw.h PCI FW related headers
+ */
+
+#ifndef __PCIFW_H__
+#define __PCIFW_H__
+
+#pragma pack(1)
+
+struct pnp_hdr_s{
+  u32	signature;	/* "$PnP" */
+  u8	rev;		/* Struct revision */
+  u8 	len;		/* Header structure len in multiples
+				 * of 16 bytes */
+  u16  off;		/* Offset to next header 00 if none */
+  u8	rsvd;		/* Reserved byte */
+  u8	cksum;		/* 8-bit checksum for this header */
+  u32	pnp_dev_id;	/* PnP Device Id */
+  u16  mfstr;		/* Pointer to manufacturer string */
+  u16	prstr;		/* Pointer to product string */
+  u8	devtype[3];	/* Device Type Code */
+  u8	devind;		/* Device Indicator */
+  u16	bcventr;	/* Bootstrap entry vector */
+  u16	rsvd2;		/* Reserved */
+  u16  sriv;		/* Static resource information vector */
+};
+
+struct pci_3_0_ds_s{
+ u32	sig;   		/* Signature "PCIR" */
+ u16	vendid;		/* Vendor ID */
+ u16	devid;		/* Device ID */
+ u16	devlistoff;	/* Device List Offset */
+ u16	len;		/* PCI Data Structure Length */
+ u8	rev;		/* PCI Data Structure Revision */
+ u8	clcode[3];	/* Class Code */
+ u16	imglen;		/* Code image length in multiples of
+				 * 512 bytes */
+ u16	coderev;	/* Revision level of code/data */
+ u8	codetype;	/* Code type 0x00 - BIOS */
+ u8	indr;		/* Last image indicator */
+ u16	mrtimglen;	/* Max Run Time Image Length */
+ u16	cuoff;		/* Config Utility Code Header Offset */
+ u16	dmtfclp;	/* DMTF CLP entry point offset */
+};
+
+struct pci_optrom_hdr_s{
+ u16	sig;		/* Signature 0x55AA */
+ u8	len;		/* Option ROM length in units of 512 bytes */
+ u8	inivec[3];	/* Initialization vector */
+ u8	rsvd[16];	/* Reserved field */
+ u16	verptr;		/* Pointer to version string - private */
+ u16	pcids;		/* Pointer to PCI data structure */
+ u16	pnphdr;		/* Pointer to PnP expansion header */
+};
+
+#pragma pack()
+
+#endif
diff --git a/drivers/scsi/bfa/include/protocol/scsi.h b/drivers/scsi/bfa/include/protocol/scsi.h
new file mode 100644
index 000000000000..b220e6b4f6e1
--- /dev/null
+++ b/drivers/scsi/bfa/include/protocol/scsi.h
@@ -0,0 +1,1648 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __SCSI_H__
+#define __SCSI_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+/*
+ * generic SCSI cdb definition
+ */
+#define SCSI_MAX_CDBLEN     16
+struct scsi_cdb_s{
+	u8         scsi_cdb[SCSI_MAX_CDBLEN];
+};
+
+/*
+ * scsi lun serial number definition
+ */
+#define SCSI_LUN_SN_LEN     32
+struct scsi_lun_sn_s{
+	u8         lun_sn[SCSI_LUN_SN_LEN];
+};
+
+/*
+ * SCSI Direct Access Commands
+ */
+enum {
+	SCSI_OP_TEST_UNIT_READY		= 0x00,
+	SCSI_OP_REQUEST_SENSE		= 0x03,
+	SCSI_OP_FORMAT_UNIT		= 0x04,
+	SCSI_OP_READ6			= 0x08,
+	SCSI_OP_WRITE6			= 0x0A,
+	SCSI_OP_WRITE_FILEMARKS		= 0x10,
+	SCSI_OP_INQUIRY			= 0x12,
+	SCSI_OP_MODE_SELECT6		= 0x15,
+	SCSI_OP_RESERVE6		= 0x16,
+	SCSI_OP_RELEASE6		= 0x17,
+	SCSI_OP_MODE_SENSE6		= 0x1A,
+	SCSI_OP_START_STOP_UNIT		= 0x1B,
+	SCSI_OP_SEND_DIAGNOSTIC		= 0x1D,
+	SCSI_OP_READ_CAPACITY		= 0x25,
+	SCSI_OP_READ10			= 0x28,
+	SCSI_OP_WRITE10			= 0x2A,
+	SCSI_OP_VERIFY10		= 0x2F,
+	SCSI_OP_READ_DEFECT_DATA	= 0x37,
+	SCSI_OP_LOG_SELECT		= 0x4C,
+	SCSI_OP_LOG_SENSE		= 0x4D,
+	SCSI_OP_MODE_SELECT10		= 0x55,
+	SCSI_OP_RESERVE10		= 0x56,
+	SCSI_OP_RELEASE10		= 0x57,
+	SCSI_OP_MODE_SENSE10		= 0x5A,
+	SCSI_OP_PER_RESERVE_IN		= 0x5E,
+	SCSI_OP_PER_RESERVE_OUR		= 0x5E,
+	SCSI_OP_READ16			= 0x88,
+	SCSI_OP_WRITE16			= 0x8A,
+	SCSI_OP_VERIFY16		= 0x8F,
+	SCSI_OP_READ_CAPACITY16		= 0x9E,
+	SCSI_OP_REPORT_LUNS		= 0xA0,
+	SCSI_OP_READ12			= 0xA8,
+	SCSI_OP_WRITE12			= 0xAA,
+	SCSI_OP_UNDEF			= 0xFF,
+};
+
+/*
+ * SCSI START_STOP_UNIT command
+ */
+struct scsi_start_stop_unit_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         lun:3;
+	u8         reserved1:4;
+	u8         immed:1;
+#else
+	u8         immed:1;
+	u8         reserved1:4;
+	u8         lun:3;
+#endif
+	u8         reserved2;
+	u8         reserved3;
+#ifdef __BIGENDIAN
+	u8         power_conditions:4;
+	u8         reserved4:2;
+	u8         loEj:1;
+	u8         start:1;
+#else
+	u8         start:1;
+	u8         loEj:1;
+	u8         reserved4:2;
+	u8         power_conditions:4;
+#endif
+	u8         control;
+};
+
+/*
+ * SCSI SEND_DIAGNOSTIC command
+ */
+struct scsi_send_diagnostic_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         self_test_code:3;
+	u8         pf:1;
+	u8         reserved1:1;
+	u8         self_test:1;
+	u8         dev_offl:1;
+	u8         unit_offl:1;
+#else
+	u8         unit_offl:1;
+	u8         dev_offl:1;
+	u8         self_test:1;
+	u8         reserved1:1;
+	u8         pf:1;
+	u8         self_test_code:3;
+#endif
+	u8         reserved2;
+
+	u8         param_list_length[2];	/* MSB first */
+	u8         control;
+
+};
+
+/*
+ * SCSI READ10/WRITE10 commands
+ */
+struct scsi_rw10_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         lun:3;
+	u8         dpo:1;	/* Disable Page Out */
+	u8         fua:1;	/* Force Unit Access */
+	u8         reserved1:2;
+	u8         rel_adr:1;	/* relative address */
+#else
+	u8         rel_adr:1;
+	u8         reserved1:2;
+	u8         fua:1;
+	u8         dpo:1;
+	u8         lun:3;
+#endif
+	u8         lba0;	/* logical block address - MSB */
+	u8         lba1;
+	u8         lba2;
+	u8         lba3;	/* LSB */
+	u8         reserved3;
+	u8         xfer_length0;	/* transfer length in blocks - MSB */
+	u8         xfer_length1;	/* LSB */
+	u8         control;
+};
+
+#define SCSI_CDB10_GET_LBA(cdb)                     \
+    (((cdb)->lba0 << 24) | ((cdb)->lba1 << 16) |    \
+     ((cdb)->lba2 << 8) | (cdb)->lba3)
+
+#define SCSI_CDB10_SET_LBA(cdb, lba) {      \
+    (cdb)->lba0 = lba >> 24;            \
+    (cdb)->lba1 = (lba >> 16) & 0xFF;   \
+    (cdb)->lba2 = (lba >> 8) & 0xFF;    \
+    (cdb)->lba3 = lba & 0xFF;           \
+}
+
+#define SCSI_CDB10_GET_TL(cdb)  \
+    ((cdb)->xfer_length0 << 8 | (cdb)->xfer_length1)
+#define SCSI_CDB10_SET_TL(cdb, tl) {      \
+    (cdb)->xfer_length0 = tl >> 8;       \
+    (cdb)->xfer_length1 = tl & 0xFF;     \
+}
+
+/*
+ * SCSI READ6/WRITE6 commands
+ */
+struct scsi_rw6_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         lun:3;
+	u8         lba0:5;		/* MSb */
+#else
+	u8         lba0:5;		/* MSb */
+	u8         lun:3;
+#endif
+	u8         lba1;
+	u8         lba2;		/* LSB */
+	u8         xfer_length;
+	u8         control;
+};
+
+#define SCSI_TAPE_CDB6_GET_TL(cdb)              \
+    (((cdb)->tl0 << 16) | ((cdb)->tl1 << 8) | (cdb)->tl2)
+
+#define SCSI_TAPE_CDB6_SET_TL(cdb, tl) {      \
+    (cdb)->tl0 = tl >> 16;            \
+    (cdb)->tl1 = (tl >> 8) & 0xFF;    \
+    (cdb)->tl2 = tl & 0xFF;           \
+}
+
+/*
+ * SCSI sequential (TAPE) wrtie command
+ */
+struct scsi_tape_wr_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         rsvd:7;
+	u8         fixed:1;	/* MSb */
+#else
+	u8         fixed:1;	/* MSb */
+	u8         rsvd:7;
+#endif
+	u8         tl0;		/* Msb */
+	u8         tl1;
+	u8         tl2;		/* Lsb */
+
+	u8         control;
+};
+
+#define SCSI_CDB6_GET_LBA(cdb)              \
+    (((cdb)->lba0 << 16) | ((cdb)->lba1 << 8) | (cdb)->lba2)
+
+#define SCSI_CDB6_SET_LBA(cdb, lba) {      \
+    (cdb)->lba0 = lba >> 16;            \
+    (cdb)->lba1 = (lba >> 8) & 0xFF;    \
+    (cdb)->lba2 = lba & 0xFF;           \
+}
+
+#define SCSI_CDB6_GET_TL(cdb) ((cdb)->xfer_length)
+#define SCSI_CDB6_SET_TL(cdb, tl) {      \
+    (cdb)->xfer_length = tl;         \
+}
+
+/*
+ * SCSI sense data format
+ */
+struct scsi_sense_s{
+#ifdef __BIGENDIAN
+	u8         valid:1;
+	u8         rsp_code:7;
+#else
+	u8         rsp_code:7;
+	u8         valid:1;
+#endif
+	u8         seg_num;
+#ifdef __BIGENDIAN
+	u8         file_mark:1;
+	u8         eom:1;		/* end of media */
+	u8         ili:1;		/* incorrect length indicator */
+	u8         reserved:1;
+	u8         sense_key:4;
+#else
+	u8         sense_key:4;
+	u8         reserved:1;
+	u8         ili:1;		/* incorrect length indicator */
+	u8         eom:1;		/* end of media */
+	u8         file_mark:1;
+#endif
+	u8         information[4];	/* device-type or command specific info
+					 */
+	u8         add_sense_length;
+					/* additional sense length */
+	u8         command_info[4];/* command specific information
+						 */
+	u8         asc;		/* additional sense code */
+	u8         ascq;		/* additional sense code qualifier */
+	u8         fru_code;	/* field replaceable unit code */
+#ifdef __BIGENDIAN
+	u8         sksv:1;		/* sense key specific valid */
+	u8         c_d:1;		/* command/data bit */
+	u8         res1:2;
+	u8         bpv:1;		/* bit pointer valid */
+	u8         bpointer:3;	/* bit pointer */
+#else
+	u8         bpointer:3;	/* bit pointer */
+	u8         bpv:1;		/* bit pointer valid */
+	u8         res1:2;
+	u8         c_d:1;		/* command/data bit */
+	u8         sksv:1;		/* sense key specific valid */
+#endif
+	u8         fpointer[2];	/* field pointer */
+};
+
+#define SCSI_SENSE_CUR_ERR          0x70
+#define SCSI_SENSE_DEF_ERR          0x71
+
+/*
+ * SCSI sense key values
+ */
+#define SCSI_SK_NO_SENSE        0x0
+#define SCSI_SK_REC_ERR         0x1	/* recovered error */
+#define SCSI_SK_NOT_READY       0x2
+#define SCSI_SK_MED_ERR         0x3	/* medium error */
+#define SCSI_SK_HW_ERR          0x4	/* hardware error */
+#define SCSI_SK_ILLEGAL_REQ     0x5
+#define SCSI_SK_UNIT_ATT        0x6	/* unit attention */
+#define SCSI_SK_DATA_PROTECT    0x7
+#define SCSI_SK_BLANK_CHECK     0x8
+#define SCSI_SK_VENDOR_SPEC     0x9
+#define SCSI_SK_COPY_ABORTED    0xA
+#define SCSI_SK_ABORTED_CMND    0xB
+#define SCSI_SK_VOL_OVERFLOW    0xD
+#define SCSI_SK_MISCOMPARE      0xE
+
+/*
+ * SCSI additional sense codes
+ */
+#define SCSI_ASC_NO_ADD_SENSE           0x00
+#define SCSI_ASC_LUN_NOT_READY          0x04
+#define SCSI_ASC_LUN_COMMUNICATION      0x08
+#define SCSI_ASC_WRITE_ERROR            0x0C
+#define SCSI_ASC_INVALID_CMND_CODE      0x20
+#define SCSI_ASC_BAD_LBA                0x21
+#define SCSI_ASC_INVALID_FIELD_IN_CDB   0x24
+#define SCSI_ASC_LUN_NOT_SUPPORTED      0x25
+#define SCSI_ASC_LUN_WRITE_PROTECT      0x27
+#define SCSI_ASC_POWERON_BDR            0x29	/* power on reset, bus reset,
+						 * bus device reset
+						 */
+#define SCSI_ASC_PARAMS_CHANGED         0x2A
+#define SCSI_ASC_CMND_CLEARED_BY_A_I    0x2F
+#define SCSI_ASC_SAVING_PARAM_NOTSUPP   0x39
+#define SCSI_ASC_TOCC                   0x3F	/* target operating condtions
+						 * changed
+						 */
+#define SCSI_ASC_PARITY_ERROR           0x47
+#define SCSI_ASC_CMND_PHASE_ERROR       0x4A
+#define SCSI_ASC_DATA_PHASE_ERROR       0x4B
+#define SCSI_ASC_VENDOR_SPEC            0x7F
+
+/*
+ * SCSI additional sense code qualifiers
+ */
+#define SCSI_ASCQ_CAUSE_NOT_REPORT      0x00
+#define SCSI_ASCQ_BECOMING_READY        0x01
+#define SCSI_ASCQ_INIT_CMD_REQ          0x02
+#define SCSI_ASCQ_FORMAT_IN_PROGRESS    0x04
+#define SCSI_ASCQ_OPERATION_IN_PROGRESS 0x07
+#define SCSI_ASCQ_SELF_TEST_IN_PROGRESS 0x09
+#define SCSI_ASCQ_WR_UNEXP_UNSOL_DATA   0x0C
+#define SCSI_ASCQ_WR_NOTENG_UNSOL_DATA  0x0D
+
+#define SCSI_ASCQ_LBA_OUT_OF_RANGE      0x00
+#define SCSI_ASCQ_INVALID_ELEMENT_ADDR  0x01
+
+#define SCSI_ASCQ_LUN_WRITE_PROTECTED       0x00
+#define SCSI_ASCQ_LUN_HW_WRITE_PROTECTED    0x01
+#define SCSI_ASCQ_LUN_SW_WRITE_PROTECTED    0x02
+
+#define SCSI_ASCQ_POR   0x01	/* power on reset */
+#define SCSI_ASCQ_SBR   0x02	/* scsi bus reset */
+#define SCSI_ASCQ_BDR   0x03	/* bus device reset */
+#define SCSI_ASCQ_DIR   0x04	/* device internal reset */
+
+#define SCSI_ASCQ_MODE_PARAMS_CHANGED       0x01
+#define SCSI_ASCQ_LOG_PARAMS_CHANGED        0x02
+#define SCSI_ASCQ_RESERVATIONS_PREEMPTED    0x03
+#define SCSI_ASCQ_RESERVATIONS_RELEASED     0x04
+#define SCSI_ASCQ_REGISTRATIONS_PREEMPTED   0x05
+
+#define SCSI_ASCQ_MICROCODE_CHANGED 0x01
+#define SCSI_ASCQ_CHANGED_OPER_COND 0x02
+#define SCSI_ASCQ_INQ_CHANGED       0x03	/* inquiry data changed */
+#define SCSI_ASCQ_DI_CHANGED        0x05	/* device id changed */
+#define SCSI_ASCQ_RL_DATA_CHANGED   0x0E	/* report luns data changed */
+
+#define SCSI_ASCQ_DP_CRC_ERR            0x01	/* data phase crc error */
+#define SCSI_ASCQ_DP_SCSI_PARITY_ERR    0x02	/* data phase scsi parity error
+						 */
+#define SCSI_ASCQ_IU_CRC_ERR            0x03	/* information unit crc error */
+#define SCSI_ASCQ_PROTO_SERV_CRC_ERR    0x05
+
+#define SCSI_ASCQ_LUN_TIME_OUT          0x01
+
+/* ------------------------------------------------------------
+ * SCSI INQUIRY
+ * ------------------------------------------------------------*/
+
+struct scsi_inquiry_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         lun:3;
+	u8         reserved1:3;
+	u8         cmd_dt:1;
+	u8         evpd:1;
+#else
+	u8         evpd:1;
+	u8         cmd_dt:1;
+	u8         reserved1:3;
+	u8         lun:3;
+#endif
+	u8         page_code;
+	u8         reserved2;
+	u8         alloc_length;
+	u8         control;
+};
+
+struct scsi_inquiry_vendor_s{
+	u8         vendor_id[8];
+};
+
+struct scsi_inquiry_prodid_s{
+	u8         product_id[16];
+};
+
+struct scsi_inquiry_prodrev_s{
+	u8         product_rev[4];
+};
+
+struct scsi_inquiry_data_s{
+#ifdef __BIGENDIAN
+	u8         peripheral_qual:3;	/* peripheral qualifier */
+	u8         device_type:5;		/* peripheral device type */
+
+	u8         rmb:1;			/* removable medium bit */
+	u8         device_type_mod:7;	/* device type modifier */
+
+	u8         version;
+
+	u8         aenc:1;		/* async event notification capability
+					 */
+	u8         trm_iop:1;	/* terminate I/O process */
+	u8         norm_aca:1;	/* normal ACA supported */
+	u8         hi_support:1;	/* SCSI-3: supports REPORT LUNS */
+	u8         rsp_data_format:4;
+
+	u8         additional_len;
+	u8         sccs:1;
+	u8         reserved1:7;
+
+	u8         reserved2:1;
+	u8         enc_serv:1;	/* enclosure service component */
+	u8         reserved3:1;
+	u8         multi_port:1;	/* multi-port device */
+	u8         m_chngr:1;	/* device in medium transport element */
+	u8         ack_req_q:1;	/* SIP specific bit */
+	u8         addr32:1;	/* SIP specific bit */
+	u8         addr16:1;	/* SIP specific bit */
+
+	u8         rel_adr:1;	/* relative address */
+	u8         w_bus32:1;
+	u8         w_bus16:1;
+	u8         synchronous:1;
+	u8         linked_commands:1;
+	u8         trans_dis:1;
+	u8         cmd_queue:1;	/* command queueing supported */
+	u8         soft_reset:1;	/* soft reset alternative (VS) */
+#else
+	u8         device_type:5;	/* peripheral device type */
+	u8         peripheral_qual:3;
+					/* peripheral qualifier */
+
+	u8         device_type_mod:7;
+					/* device type modifier */
+	u8         rmb:1;		/* removable medium bit */
+
+	u8         version;
+
+	u8         rsp_data_format:4;
+	u8         hi_support:1;	/* SCSI-3: supports REPORT LUNS */
+	u8         norm_aca:1;	/* normal ACA supported */
+	u8         terminate_iop:1;/* terminate I/O process */
+	u8         aenc:1;		/* async event notification capability
+					 */
+
+	u8         additional_len;
+	u8         reserved1:7;
+	u8         sccs:1;
+
+	u8         addr16:1;	/* SIP specific bit */
+	u8         addr32:1;	/* SIP specific bit */
+	u8         ack_req_q:1;	/* SIP specific bit */
+	u8         m_chngr:1;	/* device in medium transport element */
+	u8         multi_port:1;	/* multi-port device */
+	u8         reserved3:1;	/* TBD - Vendor Specific */
+	u8         enc_serv:1;	/* enclosure service component */
+	u8         reserved2:1;
+
+	u8         soft_seset:1;	/* soft reset alternative (VS) */
+	u8         cmd_queue:1;	/* command queueing supported */
+	u8         trans_dis:1;
+	u8         linked_commands:1;
+	u8         synchronous:1;
+	u8         w_bus16:1;
+	u8         w_bus32:1;
+	u8         rel_adr:1;	/* relative address */
+#endif
+	struct scsi_inquiry_vendor_s vendor_id;
+	struct scsi_inquiry_prodid_s product_id;
+	struct scsi_inquiry_prodrev_s product_rev;
+	u8         vendor_specific[20];
+	u8         reserved4[40];
+};
+
+/*
+ * inquiry.peripheral_qual field values
+ */
+#define SCSI_DEVQUAL_DEFAULT        0
+#define SCSI_DEVQUAL_NOT_CONNECTED  1
+#define SCSI_DEVQUAL_NOT_SUPPORTED  3
+
+/*
+ * inquiry.device_type field values
+ */
+#define SCSI_DEVICE_DIRECT_ACCESS       0x00
+#define SCSI_DEVICE_SEQ_ACCESS          0x01
+#define SCSI_DEVICE_ARRAY_CONTROLLER    0x0C
+#define SCSI_DEVICE_UNKNOWN             0x1F
+
+/*
+ * inquiry.version
+ */
+#define SCSI_VERSION_ANSI_X3131     2	/* ANSI X3.131 SCSI-2 */
+#define SCSI_VERSION_SPC            3	/* SPC (SCSI-3), ANSI X3.301:1997 */
+#define SCSI_VERSION_SPC_2          4	/* SPC-2 */
+
+/*
+ * response data format
+ */
+#define SCSI_RSP_DATA_FORMAT        2	/* SCSI-2 & SPC */
+
+/*
+ * SCSI inquiry page codes
+ */
+#define SCSI_INQ_PAGE_VPD_PAGES     0x00	/* supported vpd pages */
+#define SCSI_INQ_PAGE_USN_PAGE      0x80	/* unit serial number page */
+#define SCSI_INQ_PAGE_DEV_IDENT     0x83	/* device indentification page
+						 */
+#define SCSI_INQ_PAGES_MAX          3
+
+/*
+ * supported vital product data pages
+ */
+struct scsi_inq_page_vpd_pages_s{
+#ifdef __BIGENDIAN
+	u8         peripheral_qual:3;
+	u8         device_type:5;
+#else
+	u8         device_type:5;
+	u8         peripheral_qual:3;
+#endif
+	u8         page_code;
+	u8         reserved;
+	u8         page_length;
+	u8         pages[SCSI_INQ_PAGES_MAX];
+};
+
+/*
+ * Unit serial number page
+ */
+#define SCSI_INQ_USN_LEN 32
+
+struct scsi_inq_usn_s{
+	char            usn[SCSI_INQ_USN_LEN];
+};
+
+struct scsi_inq_page_usn_s{
+#ifdef __BIGENDIAN
+	u8         peripheral_qual:3;
+	u8         device_type:5;
+#else
+	u8         device_type:5;
+	u8         peripheral_qual:3;
+#endif
+	u8         page_code;
+	u8         reserved1;
+	u8         page_length;
+	struct scsi_inq_usn_s  usn;
+};
+
+enum {
+	SCSI_INQ_DIP_CODE_BINARY = 1,	/* identifier has binary value */
+	SCSI_INQ_DIP_CODE_ASCII = 2,	/* identifier has ascii value */
+};
+
+enum {
+	SCSI_INQ_DIP_ASSOC_LUN = 0,	/* id is associated with device */
+	SCSI_INQ_DIP_ASSOC_PORT = 1,	/* id is associated with port that
+					 * received the request
+					 */
+};
+
+enum {
+	SCSI_INQ_ID_TYPE_VENDOR = 1,
+	SCSI_INQ_ID_TYPE_IEEE = 2,
+	SCSI_INQ_ID_TYPE_FC_FS = 3,
+	SCSI_INQ_ID_TYPE_OTHER = 4,
+};
+
+struct scsi_inq_dip_desc_s{
+#ifdef __BIGENDIAN
+	u8         res0:4;
+	u8         code_set:4;
+	u8         res1:2;
+	u8         association:2;
+	u8         id_type:4;
+#else
+	u8         code_set:4;
+	u8         res0:4;
+	u8         id_type:4;
+	u8         association:2;
+	u8         res1:2;
+#endif
+	u8         res2;
+	u8         id_len;
+	struct scsi_lun_sn_s   id;
+};
+
+/*
+ * Device indentification page
+ */
+struct scsi_inq_page_dev_ident_s{
+#ifdef __BIGENDIAN
+	u8         peripheral_qual:3;
+	u8         device_type:5;
+#else
+	u8         device_type:5;
+	u8         peripheral_qual:3;
+#endif
+	u8         page_code;
+	u8         reserved1;
+	u8         page_length;
+	struct scsi_inq_dip_desc_s desc;
+};
+
+/* ------------------------------------------------------------
+ * READ CAPACITY
+ * ------------------------------------------------------------
+ */
+
+struct scsi_read_capacity_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         lun:3;
+	u8         reserved1:4;
+	u8         rel_adr:1;
+#else
+	u8         rel_adr:1;
+	u8         reserved1:4;
+	u8         lun:3;
+#endif
+	u8         lba0;	/* MSB */
+	u8         lba1;
+	u8         lba2;
+	u8         lba3;	/* LSB */
+	u8         reserved2;
+	u8         reserved3;
+#ifdef __BIGENDIAN
+	u8         reserved4:7;
+	u8         pmi:1;	/* partial medium indicator */
+#else
+	u8         pmi:1;	/* partial medium indicator */
+	u8         reserved4:7;
+#endif
+	u8         control;
+};
+
+struct scsi_read_capacity_data_s{
+	u32        max_lba;	/* maximum LBA available */
+	u32        block_length;	/* in bytes */
+};
+
+struct scsi_read_capacity16_data_s{
+	u64        lba;	/* maximum LBA available */
+	u32        block_length;	/* in bytes */
+#ifdef __BIGENDIAN
+	u8         reserved1:4,
+			p_type:3,
+			prot_en:1;
+	u8		reserved2:4,
+			lb_pbe:4;	/* logical blocks per physical block
+					 * exponent */
+	u16	reserved3:2,
+			lba_align:14;	/* lowest aligned logical block
+					 * address */
+#else
+	u16	lba_align:14,	/* lowest aligned logical block
+					 * address */
+			reserved3:2;
+	u8		lb_pbe:4,	/* logical blocks per physical block
+					 * exponent */
+			reserved2:4;
+	u8		prot_en:1,
+			p_type:3,
+			reserved1:4;
+#endif
+	u64	reserved4;
+	u64	reserved5;
+};
+
+/* ------------------------------------------------------------
+ * REPORT LUNS command
+ * ------------------------------------------------------------
+ */
+
+struct scsi_report_luns_s{
+	u8         opcode;		/* A0h - REPORT LUNS opCode */
+	u8         reserved1[5];
+	u8         alloc_length[4];/* allocation length MSB first */
+	u8         reserved2;
+	u8         control;
+};
+
+#define SCSI_REPORT_LUN_ALLOC_LENGTH(rl)                		\
+    ((rl->alloc_length[0] << 24) | (rl->alloc_length[1] << 16) | 	\
+     (rl->alloc_length[2] << 8) | (rl->alloc_length[3]))
+
+#define SCSI_REPORT_LUNS_SET_ALLOCLEN(rl, alloc_len) {      \
+    (rl)->alloc_length[0] = (alloc_len) >> 24;      			\
+    (rl)->alloc_length[1] = ((alloc_len) >> 16) & 0xFF; 		\
+    (rl)->alloc_length[2] = ((alloc_len) >> 8) & 0xFF;  		\
+    (rl)->alloc_length[3] = (alloc_len) & 0xFF;     			\
+}
+
+struct scsi_report_luns_data_s{
+	u32        lun_list_length;	/* length of LUN list length */
+	u32        reserved;
+	lun_t           lun[1];			/* first LUN in lun list */
+};
+
+/* -------------------------------------------------------------
+ * SCSI mode  parameters
+ * -----------------------------------------------------------
+ */
+enum {
+	SCSI_DA_MEDIUM_DEF = 0,	/* direct access default medium type */
+	SCSI_DA_MEDIUM_SS = 1,	/* direct access single sided */
+	SCSI_DA_MEDIUM_DS = 2,	/* direct access double sided */
+};
+
+/*
+ * SCSI Mode Select(6) cdb
+ */
+struct scsi_mode_select6_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         reserved1:3;
+	u8         pf:1;		/* page format */
+	u8         reserved2:3;
+	u8         sp:1;		/* save pages if set to 1 */
+#else
+	u8         sp:1;	/* save pages if set to 1 */
+	u8         reserved2:3;
+	u8         pf:1;	/* page format */
+	u8         reserved1:3;
+#endif
+	u8         reserved3[2];
+	u8         alloc_len;
+	u8         control;
+};
+
+/*
+ * SCSI Mode Select(10) cdb
+ */
+struct scsi_mode_select10_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         reserved1:3;
+	u8         pf:1;	/* page format */
+	u8         reserved2:3;
+	u8         sp:1;	/* save pages if set to 1 */
+#else
+	u8         sp:1;	/* save pages if set to 1 */
+	u8         reserved2:3;
+	u8         pf:1;	/* page format */
+	u8         reserved1:3;
+#endif
+	u8         reserved3[5];
+	u8         alloc_len_msb;
+	u8         alloc_len_lsb;
+	u8         control;
+};
+
+/*
+ * SCSI Mode Sense(6) cdb
+ */
+struct scsi_mode_sense6_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         reserved1:4;
+	u8         dbd:1;	/* disable block discriptors if set to 1 */
+	u8         reserved2:3;
+
+	u8         pc:2;	/* page control */
+	u8         page_code:6;
+#else
+	u8         reserved2:3;
+	u8         dbd:1;	/* disable block descriptors if set to 1 */
+	u8         reserved1:4;
+
+	u8         page_code:6;
+	u8         pc:2;	/* page control */
+#endif
+	u8         reserved3;
+	u8         alloc_len;
+	u8         control;
+};
+
+/*
+ * SCSI Mode Sense(10) cdb
+ */
+struct scsi_mode_sense10_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         reserved1:3;
+	u8         LLBAA:1;	/* long LBA accepted if set to 1 */
+	u8         dbd:1;		/* disable block descriptors if set
+					 * to 1
+					 */
+	u8         reserved2:3;
+
+	u8         pc:2;		/* page control */
+	u8         page_code:6;
+#else
+	u8         reserved2:3;
+	u8         dbd:1;		/* disable block descriptors if set to
+					 * 1
+					 */
+	u8         LLBAA:1;	/* long LBA accepted if set to 1 */
+	u8         reserved1:3;
+
+	u8         page_code:6;
+	u8         pc:2;		/* page control */
+#endif
+	u8         reserved3[4];
+	u8         alloc_len_msb;
+	u8         alloc_len_lsb;
+	u8         control;
+};
+
+#define SCSI_CDB10_GET_AL(cdb)  					\
+    ((cdb)->alloc_len_msb << 8 | (cdb)->alloc_len_lsb)
+
+#define SCSI_CDB10_SET_AL(cdb, al) {      \
+    (cdb)->alloc_len_msb = al >> 8;       				\
+    (cdb)->alloc_len_lsb = al & 0xFF;     				\
+}
+
+#define SCSI_CDB6_GET_AL(cdb) ((cdb)->alloc_len)
+
+#define SCSI_CDB6_SET_AL(cdb, al) {      \
+    (cdb)->alloc_len = al;         					\
+}
+
+/*
+ * page control field values
+ */
+#define SCSI_PC_CURRENT_VALUES       0x0
+#define SCSI_PC_CHANGEABLE_VALUES    0x1
+#define SCSI_PC_DEFAULT_VALUES       0x2
+#define SCSI_PC_SAVED_VALUES         0x3
+
+/*
+ * SCSI mode page codes
+ */
+#define SCSI_MP_VENDOR_SPEC     0x00
+#define SCSI_MP_DISC_RECN       0x02	/* disconnect-reconnect page */
+#define SCSI_MP_FORMAT_DEVICE   0x03
+#define SCSI_MP_RDG             0x04	/* rigid disk geometry page */
+#define SCSI_MP_FDP             0x05	/* flexible disk page */
+#define SCSI_MP_CACHING         0x08	/* caching page */
+#define SCSI_MP_CONTROL         0x0A	/* control mode page */
+#define SCSI_MP_MED_TYPES_SUP   0x0B	/* medium types supported page */
+#define SCSI_MP_INFO_EXCP_CNTL  0x1C	/* informational exception control */
+#define SCSI_MP_ALL             0x3F	/* return all pages - mode sense only */
+
+/*
+ * mode parameter header
+ */
+struct scsi_mode_param_header6_s{
+	u8         mode_datalen;
+	u8         medium_type;
+
+	/*
+	 * device specific parameters expanded for direct access devices
+	 */
+#ifdef __BIGENDIAN
+	u32        wp:1;		/* write protected */
+	u32        reserved1:2;
+	u32        dpofua:1;	/* disable page out + force unit access
+					 */
+	u32        reserved2:4;
+#else
+	u32        reserved2:4;
+	u32        dpofua:1;	/* disable page out + force unit access
+					 */
+	u32        reserved1:2;
+	u32        wp:1;		/* write protected */
+#endif
+
+	u8         block_desclen;
+};
+
+struct scsi_mode_param_header10_s{
+	u32        mode_datalen:16;
+	u32        medium_type:8;
+
+	/*
+	 * device specific parameters expanded for direct access devices
+	 */
+#ifdef __BIGENDIAN
+	u32        wp:1;		/* write protected */
+	u32        reserved1:2;
+	u32        dpofua:1;	/* disable page out + force unit access
+					 */
+	u32        reserved2:4;
+#else
+	u32        reserved2:4;
+	u32        dpofua:1;	/* disable page out + force unit access
+					 */
+	u32        reserved1:2;
+	u32        wp:1;		/* write protected */
+#endif
+
+#ifdef __BIGENDIAN
+	u32        reserved3:7;
+	u32        longlba:1;
+#else
+	u32        longlba:1;
+	u32        reserved3:7;
+#endif
+	u32        reserved4:8;
+	u32        block_desclen:16;
+};
+
+/*
+ * mode parameter block descriptor
+ */
+struct scsi_mode_param_desc_s{
+	u32        nblks;
+	u32        density_code:8;
+	u32        block_length:24;
+};
+
+/*
+ * Disconnect-reconnect mode page format
+ */
+struct scsi_mp_disc_recn_s{
+#ifdef __BIGENDIAN
+	u8         ps:1;
+	u8         reserved1:1;
+	u8         page_code:6;
+#else
+	u8         page_code:6;
+	u8         reserved1:1;
+	u8         ps:1;
+#endif
+	u8         page_len;
+	u8         buf_full_ratio;
+	u8         buf_empty_ratio;
+
+	u8         bil_msb;	/* bus inactivity limit -MSB */
+	u8         bil_lsb;	/* bus inactivity limit -LSB */
+
+	u8         dtl_msb;	/* disconnect time limit - MSB */
+	u8         dtl_lsb;	/* disconnect time limit - LSB */
+
+	u8         ctl_msb;	/* connect time limit - MSB */
+	u8         ctl_lsb;	/* connect time limit - LSB */
+
+	u8         max_burst_len_msb;
+	u8         max_burst_len_lsb;
+#ifdef __BIGENDIAN
+	u8         emdp:1;	/* enable modify data pointers */
+	u8         fa:3;	/* fair arbitration */
+	u8         dimm:1;	/* disconnect immediate */
+	u8         dtdc:3;	/* data transfer disconnect control */
+#else
+	u8         dtdc:3;	/* data transfer disconnect control */
+	u8         dimm:1;	/* disconnect immediate */
+	u8         fa:3;	/* fair arbitration */
+	u8         emdp:1;	/* enable modify data pointers */
+#endif
+
+	u8         reserved3;
+
+	u8         first_burst_len_msb;
+	u8         first_burst_len_lsb;
+};
+
+/*
+ * SCSI format device mode page
+ */
+struct scsi_mp_format_device_s{
+#ifdef __BIGENDIAN
+	u32        ps:1;
+	u32        reserved1:1;
+	u32        page_code:6;
+#else
+	u32        page_code:6;
+	u32        reserved1:1;
+	u32        ps:1;
+#endif
+	u32        page_len:8;
+	u32        tracks_per_zone:16;
+
+	u32        a_sec_per_zone:16;
+	u32        a_tracks_per_zone:16;
+
+	u32        a_tracks_per_lun:16;	/* alternate tracks/lun-MSB */
+	u32        sec_per_track:16;	/* sectors/track-MSB */
+
+	u32        bytes_per_sector:16;
+	u32        interleave:16;
+
+	u32        tsf:16;			/* track skew factor-MSB */
+	u32        csf:16;			/* cylinder skew factor-MSB */
+
+#ifdef __BIGENDIAN
+	u32        ssec:1;	/* soft sector formatting */
+	u32        hsec:1;	/* hard sector formatting */
+	u32        rmb:1;	/* removable media */
+	u32        surf:1;	/* surface */
+	u32        reserved2:4;
+#else
+	u32        reserved2:4;
+	u32        surf:1;	/* surface */
+	u32        rmb:1;	/* removable media */
+	u32        hsec:1;	/* hard sector formatting */
+	u32        ssec:1;	/* soft sector formatting */
+#endif
+	u32        reserved3:24;
+};
+
+/*
+ * SCSI rigid disk device geometry page
+ */
+struct scsi_mp_rigid_device_geometry_s{
+#ifdef __BIGENDIAN
+	u32        ps:1;
+	u32        reserved1:1;
+	u32        page_code:6;
+#else
+	u32        page_code:6;
+	u32        reserved1:1;
+	u32        ps:1;
+#endif
+	u32        page_len:8;
+	u32        num_cylinders0:8;
+	u32        num_cylinders1:8;
+
+	u32        num_cylinders2:8;
+	u32        num_heads:8;
+	u32        scwp0:8;
+	u32        scwp1:8;
+
+	u32        scwp2:8;
+	u32        scrwc0:8;
+	u32        scrwc1:8;
+	u32        scrwc2:8;
+
+	u32        dsr:16;
+	u32        lscyl0:8;
+	u32        lscyl1:8;
+
+	u32        lscyl2:8;
+#ifdef __BIGENDIAN
+	u32        reserved2:6;
+	u32        rpl:2;	/* rotational position locking */
+#else
+	u32        rpl:2;	/* rotational position locking */
+	u32        reserved2:6;
+#endif
+	u32        rot_off:8;
+	u32        reserved3:8;
+
+	u32        med_rot_rate:16;
+	u32        reserved4:16;
+};
+
+/*
+ * SCSI caching mode page
+ */
+struct scsi_mp_caching_s{
+#ifdef __BIGENDIAN
+	u8         ps:1;
+	u8         res1:1;
+	u8         page_code:6;
+#else
+	u8         page_code:6;
+	u8         res1:1;
+	u8         ps:1;
+#endif
+	u8         page_len;
+#ifdef __BIGENDIAN
+	u8         ic:1;	/* initiator control */
+	u8         abpf:1;	/* abort pre-fetch */
+	u8         cap:1;	/* caching analysis permitted */
+	u8         disc:1;	/* discontinuity */
+	u8         size:1;	/* size enable */
+	u8         wce:1;	/* write cache enable */
+	u8         mf:1;	/* multiplication factor */
+	u8         rcd:1;	/* read cache disable */
+
+	u8         drrp:4;	/* demand read retention priority */
+	u8         wrp:4;	/* write retention priority */
+#else
+	u8         rcd:1;	/* read cache disable */
+	u8         mf:1;	/* multiplication factor */
+	u8         wce:1;	/* write cache enable */
+	u8         size:1;	/* size enable */
+	u8         disc:1;	/* discontinuity */
+	u8         cap:1;	/* caching analysis permitted */
+	u8         abpf:1;	/* abort pre-fetch */
+	u8         ic:1;	/* initiator control */
+
+	u8         wrp:4;	/* write retention priority */
+	u8         drrp:4;	/* demand read retention priority */
+#endif
+	u8         dptl[2];/* disable pre-fetch transfer length */
+	u8         min_prefetch[2];
+	u8         max_prefetch[2];
+	u8         max_prefetch_limit[2];
+#ifdef __BIGENDIAN
+	u8         fsw:1;	/* force sequential write */
+	u8         lbcss:1;/* logical block cache segment size */
+	u8         dra:1;	/* disable read ahead */
+	u8         vs:2;	/* vendor specific */
+	u8         res2:3;
+#else
+	u8         res2:3;
+	u8         vs:2;	/* vendor specific */
+	u8         dra:1;	/* disable read ahead */
+	u8         lbcss:1;/* logical block cache segment size */
+	u8         fsw:1;	/* force sequential write */
+#endif
+	u8         num_cache_segs;
+
+	u8         cache_seg_size[2];
+	u8         res3;
+	u8         non_cache_seg_size[3];
+};
+
+/*
+ * SCSI control mode page
+ */
+struct scsi_mp_control_page_s{
+#ifdef __BIGENDIAN
+u8         ps:1;
+u8         reserved1:1;
+u8         page_code:6;
+#else
+u8         page_code:6;
+u8         reserved1:1;
+u8         ps:1;
+#endif
+	u8         page_len;
+#ifdef __BIGENDIAN
+	u8         tst:3;		/* task set type */
+	u8         reserved3:3;
+	u8         gltsd:1;	/* global logging target save disable */
+	u8         rlec:1;		/* report log exception condition */
+
+	u8         qalgo_mod:4;	/* queue alogorithm modifier */
+	u8         reserved4:1;
+	u8         qerr:2;		/* queue error management */
+	u8         dque:1;		/* disable queuing */
+
+	u8         reserved5:1;
+	u8         rac:1;		/* report a check */
+	u8         reserved6:2;
+	u8         swp:1;		/* software write protect */
+	u8         raerp:1;	/* ready AER permission */
+	u8         uaaerp:1;	/* unit attenstion AER permission */
+	u8         eaerp:1;	/* error AER permission */
+
+	u8         reserved7:5;
+	u8         autoload_mod:3;
+#else
+	u8         rlec:1;		/* report log exception condition */
+	u8         gltsd:1;	/* global logging target save disable */
+	u8         reserved3:3;
+	u8         tst:3;		/* task set type */
+
+	u8         dque:1;		/* disable queuing */
+	u8         qerr:2;		/* queue error management */
+	u8         reserved4:1;
+	u8         qalgo_mod:4;	/* queue alogorithm modifier */
+
+	u8         eaerp:1;	/* error AER permission */
+	u8         uaaerp:1;	/* unit attenstion AER permission */
+	u8         raerp:1;	/* ready AER permission */
+	u8         swp:1;		/* software write protect */
+	u8         reserved6:2;
+	u8         rac:1;		/* report a check */
+	u8         reserved5:1;
+
+	u8         autoload_mod:3;
+	u8         reserved7:5;
+#endif
+	u8         rahp_msb;	/* ready AER holdoff period - MSB */
+	u8         rahp_lsb;	/* ready AER holdoff period - LSB */
+
+	u8         busy_timeout_period_msb;
+	u8         busy_timeout_period_lsb;
+
+	u8         ext_selftest_compl_time_msb;
+	u8         ext_selftest_compl_time_lsb;
+};
+
+/*
+ * SCSI medium types supported mode page
+ */
+struct scsi_mp_medium_types_sup_s{
+#ifdef __BIGENDIAN
+	u8         ps:1;
+	u8         reserved1:1;
+	u8         page_code:6;
+#else
+	u8         page_code:6;
+	u8         reserved1:1;
+	u8         ps:1;
+#endif
+	u8         page_len;
+
+	u8         reserved3[2];
+	u8         med_type1_sup;	/* medium type one supported */
+	u8         med_type2_sup;	/* medium type two supported */
+	u8         med_type3_sup;	/* medium type three supported */
+	u8         med_type4_sup;	/* medium type four supported */
+};
+
+/*
+ * SCSI informational exception control mode page
+ */
+struct scsi_mp_info_excpt_cntl_s{
+#ifdef __BIGENDIAN
+	u8         ps:1;
+	u8         reserved1:1;
+	u8         page_code:6;
+#else
+	u8         page_code:6;
+	u8         reserved1:1;
+	u8         ps:1;
+#endif
+	u8         page_len;
+#ifdef __BIGENDIAN
+	u8         perf:1;		/* performance */
+	u8         reserved3:1;
+	u8         ebf:1;		/* enable background fucntion */
+	u8         ewasc:1;	/* enable warning */
+	u8         dexcpt:1;	/* disable exception control */
+	u8         test:1;		/* enable test device failure
+					 * notification
+					 */
+	u8         reserved4:1;
+	u8         log_error:1;
+
+	u8         reserved5:4;
+	u8         mrie:4;		/* method of reporting info
+					 * exceptions
+					 */
+#else
+	u8         log_error:1;
+	u8         reserved4:1;
+	u8         test:1;		/* enable test device failure
+					 * notification
+					 */
+	u8         dexcpt:1;	/* disable exception control */
+	u8         ewasc:1;	/* enable warning */
+	u8         ebf:1;		/* enable background fucntion */
+	u8         reserved3:1;
+	u8         perf:1;		/* performance */
+
+	u8         mrie:4;		/* method of reporting info
+					 * exceptions
+					 */
+	u8         reserved5:4;
+#endif
+	u8         interval_timer_msb;
+	u8         interval_timer_lsb;
+
+	u8         report_count_msb;
+	u8         report_count_lsb;
+};
+
+/*
+ * Methods of reporting informational exceptions
+ */
+#define SCSI_MP_IEC_NO_REPORT       0x0	/* no reporting of exceptions */
+#define SCSI_MP_IEC_AER             0x1	/* async event reporting */
+#define SCSI_MP_IEC_UNIT_ATTN       0x2	/* generate unit attenstion */
+#define SCSI_MO_IEC_COND_REC_ERR    0x3	/* conditionally generate recovered
+					 * error
+					 */
+#define SCSI_MP_IEC_UNCOND_REC_ERR  0x4	/* unconditionally generate recovered
+					 * error
+					 */
+#define SCSI_MP_IEC_NO_SENSE        0x5	/* generate no sense */
+#define SCSI_MP_IEC_ON_REQUEST      0x6	/* only report exceptions on request */
+
+/*
+ * SCSI flexible disk page
+ */
+struct scsi_mp_flexible_disk_s{
+#ifdef __BIGENDIAN
+	u8         ps:1;
+	u8         reserved1:1;
+	u8         page_code:6;
+#else
+	u8         page_code:6;
+	u8         reserved1:1;
+	u8         ps:1;
+#endif
+	u8         page_len;
+
+	u8         transfer_rate_msb;
+	u8         transfer_rate_lsb;
+
+	u8         num_heads;
+	u8         num_sectors;
+
+	u8         bytes_per_sector_msb;
+	u8         bytes_per_sector_lsb;
+
+	u8         num_cylinders_msb;
+	u8         num_cylinders_lsb;
+
+	u8         sc_wpc_msb;	/* starting cylinder-write
+					 * precompensation msb
+					 */
+	u8         sc_wpc_lsb;	/* starting cylinder-write
+					 * precompensation lsb
+					 */
+	u8         sc_rwc_msb;	/* starting cylinder-reduced write
+					 * current msb
+					 */
+	u8         sc_rwc_lsb;	/* starting cylinder-reduced write
+					 * current lsb
+					 */
+
+	u8         dev_step_rate_msb;
+	u8         dev_step_rate_lsb;
+
+	u8         dev_step_pulse_width;
+
+	u8         head_sd_msb;	/* head settle delay msb */
+	u8         head_sd_lsb;	/* head settle delay lsb */
+
+	u8         motor_on_delay;
+	u8         motor_off_delay;
+#ifdef __BIGENDIAN
+	u8         trdy:1;		/* true ready bit */
+	u8         ssn:1;		/* start sector number bit */
+	u8         mo:1;		/* motor on bit */
+	u8         reserved3:5;
+
+	u8         reserved4:4;
+	u8         spc:4;		/* step pulse per cylinder */
+#else
+	u8         reserved3:5;
+	u8         mo:1;		/* motor on bit */
+	u8         ssn:1;		/* start sector number bit */
+	u8         trdy:1;		/* true ready bit */
+
+	u8         spc:4;		/* step pulse per cylinder */
+	u8         reserved4:4;
+#endif
+	u8         write_comp;
+	u8         head_load_delay;
+	u8         head_unload_delay;
+#ifdef __BIGENDIAN
+	u8         pin34:4;	/* pin34 usage */
+	u8         pin2:4;		/* pin2 usage */
+
+	u8         pin4:4;		/* pin4 usage */
+	u8         pin1:4;		/* pin1 usage */
+#else
+	u8         pin2:4;		/* pin2 usage */
+	u8         pin34:4;	/* pin34 usage */
+
+	u8         pin1:4;		/* pin1 usage */
+	u8         pin4:4;		/* pin4 usage */
+#endif
+	u8         med_rot_rate_msb;
+	u8         med_rot_rate_lsb;
+
+	u8         reserved5[2];
+};
+
+struct scsi_mode_page_format_data6_s{
+	struct scsi_mode_param_header6_s mph;	/* mode page header */
+	struct scsi_mode_param_desc_s desc;	/* block descriptor */
+	struct scsi_mp_format_device_s format;	/* format device data */
+};
+
+struct scsi_mode_page_format_data10_s{
+	struct scsi_mode_param_header10_s mph;	/* mode page header */
+	struct scsi_mode_param_desc_s desc;	/* block descriptor */
+	struct scsi_mp_format_device_s format;	/* format device data */
+};
+
+struct scsi_mode_page_rdg_data6_s{
+	struct scsi_mode_param_header6_s mph;	/* mode page header */
+	struct scsi_mode_param_desc_s desc;	/* block descriptor */
+	struct scsi_mp_rigid_device_geometry_s rdg;
+					/* rigid geometry data */
+};
+
+struct scsi_mode_page_rdg_data10_s{
+	struct scsi_mode_param_header10_s mph;	/* mode page header */
+	struct scsi_mode_param_desc_s desc;	/* block descriptor */
+	struct scsi_mp_rigid_device_geometry_s rdg;
+					/* rigid geometry data */
+};
+
+struct scsi_mode_page_cache6_s{
+	struct scsi_mode_param_header6_s mph;	/* mode page header */
+	struct scsi_mode_param_desc_s desc;	/* block descriptor */
+	struct scsi_mp_caching_s cache;	/* cache page data */
+};
+
+struct scsi_mode_page_cache10_s{
+	struct scsi_mode_param_header10_s mph;	/* mode page header */
+	struct scsi_mode_param_desc_s desc;	/* block descriptor */
+	struct scsi_mp_caching_s cache;	/* cache page data */
+};
+
+/* --------------------------------------------------------------
+ * Format Unit command
+ * ------------------------------------------------------------
+ */
+
+/*
+ * Format Unit CDB
+ */
+struct scsi_format_unit_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         res1:3;
+	u8         fmtdata:1;	/* if set, data out phase has format
+					 * data
+					 */
+	u8         cmplst:1;	/* if set, defect list is complete */
+	u8         def_list:3;	/* format of defect descriptor is
+					 * fmtdata =1
+					 */
+#else
+	u8         def_list:3;	/* format of defect descriptor is
+					 * fmtdata = 1
+					 */
+	u8         cmplst:1;	/* if set, defect list is complete */
+	u8         fmtdata:1;	/* if set, data out phase has format
+					 * data
+					 */
+	u8         res1:3;
+#endif
+	u8         interleave_msb;
+	u8         interleave_lsb;
+	u8         vendor_spec;
+	u8         control;
+};
+
+/*
+ * h
+ */
+struct scsi_reserve6_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         reserved:3;
+	u8         obsolete:4;
+	u8         extent:1;
+#else
+	u8         extent:1;
+	u8         obsolete:4;
+	u8         reserved:3;
+#endif
+	u8         reservation_id;
+	u16        param_list_len;
+	u8         control;
+};
+
+/*
+ * h
+ */
+struct scsi_release6_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         reserved1:3;
+	u8         obsolete:4;
+	u8         extent:1;
+#else
+	u8         extent:1;
+	u8         obsolete:4;
+	u8         reserved1:3;
+#endif
+	u8         reservation_id;
+	u16        reserved2;
+	u8         control;
+};
+
+/*
+ * h
+ */
+struct scsi_reserve10_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         reserved1:3;
+	u8         third_party:1;
+	u8         reserved2:2;
+	u8         long_id:1;
+	u8         extent:1;
+#else
+	u8         extent:1;
+	u8         long_id:1;
+	u8         reserved2:2;
+	u8         third_party:1;
+	u8         reserved1:3;
+#endif
+	u8         reservation_id;
+	u8         third_pty_dev_id;
+	u8         reserved3;
+	u8         reserved4;
+	u8         reserved5;
+	u16        param_list_len;
+	u8         control;
+};
+
+struct scsi_release10_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         reserved1:3;
+	u8         third_party:1;
+	u8         reserved2:2;
+	u8         long_id:1;
+	u8         extent:1;
+#else
+	u8         extent:1;
+	u8         long_id:1;
+	u8         reserved2:2;
+	u8         third_party:1;
+	u8         reserved1:3;
+#endif
+	u8         reservation_id;
+	u8         third_pty_dev_id;
+	u8         reserved3;
+	u8         reserved4;
+	u8         reserved5;
+	u16        param_list_len;
+	u8         control;
+};
+
+struct scsi_verify10_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         lun:3;
+	u8         dpo:1;
+	u8         reserved:2;
+	u8         bytchk:1;
+	u8         reladdr:1;
+#else
+	u8         reladdr:1;
+	u8         bytchk:1;
+	u8         reserved:2;
+	u8         dpo:1;
+	u8         lun:3;
+#endif
+	u8         lba0;
+	u8         lba1;
+	u8         lba2;
+	u8         lba3;
+	u8         reserved1;
+	u8         verification_len0;
+	u8         verification_len1;
+	u8         control_byte;
+};
+
+struct scsi_request_sense_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         lun:3;
+	u8         reserved:5;
+#else
+	u8         reserved:5;
+	u8         lun:3;
+#endif
+	u8         reserved0;
+	u8         reserved1;
+	u8         alloc_len;
+	u8         control_byte;
+};
+
+/* ------------------------------------------------------------
+ * SCSI status byte values
+ * ------------------------------------------------------------
+ */
+#define SCSI_STATUS_GOOD                   0x00
+#define SCSI_STATUS_CHECK_CONDITION        0x02
+#define SCSI_STATUS_CONDITION_MET          0x04
+#define SCSI_STATUS_BUSY                   0x08
+#define SCSI_STATUS_INTERMEDIATE           0x10
+#define SCSI_STATUS_ICM                    0x14	/* intermediate condition met */
+#define SCSI_STATUS_RESERVATION_CONFLICT   0x18
+#define SCSI_STATUS_COMMAND_TERMINATED     0x22
+#define SCSI_STATUS_QUEUE_FULL             0x28
+#define SCSI_STATUS_ACA_ACTIVE             0x30
+
+#define SCSI_MAX_ALLOC_LEN		0xFF	/* maximum allocarion length
+						 * in CDBs
+						 */
+
+#define SCSI_OP_WRITE_VERIFY10      0x2E
+#define SCSI_OP_WRITE_VERIFY12      0xAE
+#define SCSI_OP_UNDEF               0xFF
+
+/*
+ * SCSI WRITE-VERIFY(10) command
+ */
+struct scsi_write_verify10_s{
+	u8         opcode;
+#ifdef __BIGENDIAN
+	u8         reserved1:3;
+	u8         dpo:1;		/* Disable Page Out */
+	u8         reserved2:1;
+	u8         ebp:1;		/* erse by-pass */
+	u8         bytchk:1;	/* byte check */
+	u8         rel_adr:1;	/* relative address */
+#else
+	u8         rel_adr:1;	/* relative address */
+	u8         bytchk:1;	/* byte check */
+	u8         ebp:1;		/* erse by-pass */
+	u8         reserved2:1;
+	u8         dpo:1;		/* Disable Page Out */
+	u8         reserved1:3;
+#endif
+	u8         lba0;		/* logical block address - MSB */
+	u8         lba1;
+	u8         lba2;
+	u8         lba3;		/* LSB */
+	u8         reserved3;
+	u8         xfer_length0;	/* transfer length in blocks - MSB */
+	u8         xfer_length1;	/* LSB */
+	u8         control;
+};
+
+#pragma pack()
+
+#endif /* __SCSI_H__ */
diff --git a/drivers/scsi/bfa/include/protocol/types.h b/drivers/scsi/bfa/include/protocol/types.h
new file mode 100644
index 000000000000..2875a6cced3b
--- /dev/null
+++ b/drivers/scsi/bfa/include/protocol/types.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  types.h Protocol defined base types
+ */
+
+#ifndef __TYPES_H__
+#define __TYPES_H__
+
+#include <bfa_os_inc.h>
+
+#define wwn_t u64
+#define lun_t u64
+
+#define WWN_NULL	(0)
+#define FC_SYMNAME_MAX	256	/*  max name server symbolic name size */
+#define FC_ALPA_MAX	128
+
+#pragma pack(1)
+
+#define MAC_ADDRLEN	(6)
+struct mac_s { u8 mac[MAC_ADDRLEN]; };
+#define mac_t struct mac_s
+
+#pragma pack()
+
+#endif
diff --git a/drivers/scsi/bfa/loop.c b/drivers/scsi/bfa/loop.c
new file mode 100644
index 000000000000..a418dedebe9e
--- /dev/null
+++ b/drivers/scsi/bfa/loop.c
@@ -0,0 +1,422 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  port_loop.c vport private loop implementation.
+ */
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, LOOP);
+
+/**
+ *   ALPA to LIXA bitmap mapping
+ *
+ *   ALPA 0x00 (Word 0, Bit 30) is invalid for N_Ports. Also Word 0 Bit 31
+ * is for L_bit (login required) and is filled as ALPA 0x00 here.
+ */
+static const u8   port_loop_alpa_map[] = {
+	0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA,	/* Word 3 Bits 0..7 */
+	0xD9, 0xD6, 0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE,	/* Word 3 Bits 8..15 */
+	0xCD, 0xCC, 0xCB, 0xCA, 0xC9, 0xC7, 0xC6, 0xC5,	/* Word 3 Bits 16..23 */
+	0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5, 0xB4, 0xB3,	/* Word 3 Bits 24..31 */
+
+	0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9,	/* Word 2 Bits 0..7 */
+	0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B,	/* Word 2 Bits 8..15 */
+	0x98, 0x97, 0x90, 0x8F, 0x88, 0x84, 0x82, 0x81,	/* Word 2 Bits 16..23 */
+	0x80, 0x7C, 0x7A, 0x79, 0x76, 0x75, 0x74, 0x73,	/* Word 2 Bits 24..31 */
+
+	0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69,	/* Word 1 Bits 0..7 */
+	0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56,	/* Word 1 Bits 8..15 */
+	0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C,	/* Word 1 Bits 16..23 */
+	0x4B, 0x4A, 0x49, 0x47, 0x46, 0x45, 0x43, 0x3C,	/* Word 1 Bits 24..31 */
+
+	0x3A, 0x39, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31,	/* Word 0 Bits 0..7 */
+	0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29, 0x27, 0x26,	/* Word 0 Bits 8..15 */
+	0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17,	/* Word 0 Bits 16..23 */
+	0x10, 0x0F, 0x08, 0x04, 0x02, 0x01, 0x00, 0x00,	/* Word 0 Bits 24..31 */
+};
+
+/*
+ * Local Functions
+ */
+bfa_status_t    bfa_fcs_port_loop_send_plogi(struct bfa_fcs_port_s *port,
+					     u8 alpa);
+
+void            bfa_fcs_port_loop_plogi_response(void *fcsarg,
+						 struct bfa_fcxp_s *fcxp,
+						 void *cbarg,
+						 bfa_status_t req_status,
+						 u32 rsp_len,
+						 u32 resid_len,
+						 struct fchs_s *rsp_fchs);
+
+bfa_status_t    bfa_fcs_port_loop_send_adisc(struct bfa_fcs_port_s *port,
+					     u8 alpa);
+
+void            bfa_fcs_port_loop_adisc_response(void *fcsarg,
+						 struct bfa_fcxp_s *fcxp,
+						 void *cbarg,
+						 bfa_status_t req_status,
+						 u32 rsp_len,
+						 u32 resid_len,
+						 struct fchs_s *rsp_fchs);
+
+bfa_status_t    bfa_fcs_port_loop_send_plogi_acc(struct bfa_fcs_port_s *port,
+						 u8 alpa);
+
+void            bfa_fcs_port_loop_plogi_acc_response(void *fcsarg,
+						     struct bfa_fcxp_s *fcxp,
+						     void *cbarg,
+						     bfa_status_t req_status,
+						     u32 rsp_len,
+						     u32 resid_len,
+						     struct fchs_s *rsp_fchs);
+
+bfa_status_t    bfa_fcs_port_loop_send_adisc_acc(struct bfa_fcs_port_s *port,
+						 u8 alpa);
+
+void            bfa_fcs_port_loop_adisc_acc_response(void *fcsarg,
+						     struct bfa_fcxp_s *fcxp,
+						     void *cbarg,
+						     bfa_status_t req_status,
+						     u32 rsp_len,
+						     u32 resid_len,
+						     struct fchs_s *rsp_fchs);
+/**
+ *   Called by port to initializar in provate LOOP topology.
+ */
+void
+bfa_fcs_port_loop_init(struct bfa_fcs_port_s *port)
+{
+}
+
+/**
+ *   Called by port to notify transition to online state.
+ */
+void
+bfa_fcs_port_loop_online(struct bfa_fcs_port_s *port)
+{
+
+	u8         num_alpa = port->port_topo.ploop.num_alpa;
+	u8        *alpa_pos_map = port->port_topo.ploop.alpa_pos_map;
+	struct bfa_fcs_rport_s *r_port;
+	int             ii = 0;
+
+	/*
+	 * If the port role is Initiator Mode, create Rports.
+	 */
+	if (port->port_cfg.roles == BFA_PORT_ROLE_FCP_IM) {
+		/*
+		 * Check if the ALPA positional bitmap is available.
+		 * if not, we send PLOGI to all possible ALPAs.
+		 */
+		if (num_alpa > 0) {
+			for (ii = 0; ii < num_alpa; ii++) {
+				/*
+				 * ignore ALPA of bfa port
+				 */
+				if (alpa_pos_map[ii] != port->pid) {
+					r_port = bfa_fcs_rport_create(port,
+						alpa_pos_map[ii]);
+				}
+			}
+		} else {
+			for (ii = 0; ii < MAX_ALPA_COUNT; ii++) {
+				/*
+				 * ignore ALPA of bfa port
+				 */
+				if ((port_loop_alpa_map[ii] > 0)
+				    && (port_loop_alpa_map[ii] != port->pid))
+					bfa_fcs_port_loop_send_plogi(port,
+						port_loop_alpa_map[ii]);
+				/**TBD */
+			}
+		}
+	} else {
+		/*
+		 * TBD Target Mode ??
+		 */
+	}
+
+}
+
+/**
+ *   Called by port to notify transition to offline state.
+ */
+void
+bfa_fcs_port_loop_offline(struct bfa_fcs_port_s *port)
+{
+
+}
+
+/**
+ *   Called by port to notify a LIP on the loop.
+ */
+void
+bfa_fcs_port_loop_lip(struct bfa_fcs_port_s *port)
+{
+}
+
+/**
+ * Local Functions.
+ */
+bfa_status_t
+bfa_fcs_port_loop_send_plogi(struct bfa_fcs_port_s *port, u8 alpa)
+{
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp = NULL;
+	int             len;
+
+	bfa_trc(port->fcs, alpa);
+
+	fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
+				  NULL);
+	bfa_assert(fcxp);
+
+	len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
+			     bfa_fcs_port_get_fcid(port), 0,
+			     port->port_cfg.pwwn, port->port_cfg.nwwn,
+				 bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+			  FC_CLASS_3, len, &fchs,
+			  bfa_fcs_port_loop_plogi_response, (void *)port,
+			  FC_MAX_PDUSZ, FC_RA_TOV);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ *   Called by fcxp to notify the Plogi response
+ */
+void
+bfa_fcs_port_loop_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				 void *cbarg, bfa_status_t req_status,
+				 u32 rsp_len, u32 resid_len,
+				 struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
+	struct fc_logi_s     *plogi_resp;
+	struct fc_els_cmd_s   *els_cmd;
+
+	bfa_trc(port->fcs, req_status);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		/*
+		 * @todo
+		 * This could mean that the device with this APLA does not
+		 * exist on the loop.
+		 */
+
+		return;
+	}
+
+	els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+	plogi_resp = (struct fc_logi_s *) els_cmd;
+
+	if (els_cmd->els_code == FC_ELS_ACC) {
+		bfa_fcs_rport_start(port, rsp_fchs, plogi_resp);
+	} else {
+		bfa_trc(port->fcs, plogi_resp->els_cmd.els_code);
+		bfa_assert(0);
+	}
+}
+
+bfa_status_t
+bfa_fcs_port_loop_send_plogi_acc(struct bfa_fcs_port_s *port, u8 alpa)
+{
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	int             len;
+
+	bfa_trc(port->fcs, alpa);
+
+	fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
+				  NULL);
+	bfa_assert(fcxp);
+
+	len = fc_plogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
+				 bfa_fcs_port_get_fcid(port), 0,
+				 port->port_cfg.pwwn, port->port_cfg.nwwn,
+				 bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+				 FC_CLASS_3, len, &fchs,
+				 bfa_fcs_port_loop_plogi_acc_response,
+				 (void *)port, FC_MAX_PDUSZ, 0); /* No response
+								  * expected
+								  */
+
+	return BFA_STATUS_OK;
+}
+
+/*
+ *  Plogi Acc Response
+ * We donot do any processing here.
+ */
+void
+bfa_fcs_port_loop_plogi_acc_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				     void *cbarg, bfa_status_t req_status,
+				     u32 rsp_len, u32 resid_len,
+				     struct fchs_s *rsp_fchs)
+{
+
+	struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
+
+	bfa_trc(port->fcs, port->pid);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		return;
+	}
+}
+
+bfa_status_t
+bfa_fcs_port_loop_send_adisc(struct bfa_fcs_port_s *port, u8 alpa)
+{
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	int             len;
+
+	bfa_trc(port->fcs, alpa);
+
+	fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
+				  NULL);
+	bfa_assert(fcxp);
+
+	len = fc_adisc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
+			     bfa_fcs_port_get_fcid(port), 0,
+			     port->port_cfg.pwwn, port->port_cfg.nwwn);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+			  FC_CLASS_3, len, &fchs,
+			  bfa_fcs_port_loop_adisc_response, (void *)port,
+			  FC_MAX_PDUSZ, FC_RA_TOV);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ *   Called by fcxp to notify the ADISC response
+ */
+void
+bfa_fcs_port_loop_adisc_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				 void *cbarg, bfa_status_t req_status,
+				 u32 rsp_len, u32 resid_len,
+				 struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
+	struct bfa_fcs_rport_s *rport;
+	struct fc_adisc_s     *adisc_resp;
+	struct fc_els_cmd_s   *els_cmd;
+	u32        pid = rsp_fchs->s_id;
+
+	bfa_trc(port->fcs, req_status);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		/*
+		 * TBD : we may need to retry certain requests
+		 */
+		bfa_fcxp_free(fcxp);
+		return;
+	}
+
+	els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+	adisc_resp = (struct fc_adisc_s *) els_cmd;
+
+	if (els_cmd->els_code == FC_ELS_ACC) {
+	} else {
+		bfa_trc(port->fcs, adisc_resp->els_cmd.els_code);
+
+		/*
+		 * TBD: we may need to check for reject codes and retry
+		 */
+		rport = bfa_fcs_port_get_rport_by_pid(port, pid);
+		if (rport) {
+			list_del(&rport->qe);
+			bfa_fcs_rport_delete(rport);
+		}
+
+	}
+	return;
+}
+
+bfa_status_t
+bfa_fcs_port_loop_send_adisc_acc(struct bfa_fcs_port_s *port, u8 alpa)
+{
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	int             len;
+
+	bfa_trc(port->fcs, alpa);
+
+	fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
+				  NULL);
+	bfa_assert(fcxp);
+
+	len = fc_adisc_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
+				 bfa_fcs_port_get_fcid(port), 0,
+				 port->port_cfg.pwwn, port->port_cfg.nwwn);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+				FC_CLASS_3, len, &fchs,
+				bfa_fcs_port_loop_adisc_acc_response,
+				(void *)port, FC_MAX_PDUSZ, 0); /* no reponse
+								 * expected
+								 */
+
+	return BFA_STATUS_OK;
+}
+
+/*
+ *  Adisc Acc Response
+ * We donot do any processing here.
+ */
+void
+bfa_fcs_port_loop_adisc_acc_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				     void *cbarg, bfa_status_t req_status,
+				     u32 rsp_len, u32 resid_len,
+				     struct fchs_s *rsp_fchs)
+{
+
+	struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
+
+	bfa_trc(port->fcs, port->pid);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		return;
+	}
+}
diff --git a/drivers/scsi/bfa/lport_api.c b/drivers/scsi/bfa/lport_api.c
new file mode 100644
index 000000000000..8f51a83f1834
--- /dev/null
+++ b/drivers/scsi/bfa/lport_api.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  port_api.c BFA FCS port
+ */
+
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+#include "fcs_rport.h"
+#include "fcs_fabric.h"
+#include "fcs_trcmod.h"
+#include "fcs_vport.h"
+
+BFA_TRC_FILE(FCS, PORT_API);
+
+
+
+/**
+ *  fcs_port_api BFA FCS port API
+ */
+
+void
+bfa_fcs_cfg_base_port(struct bfa_fcs_s *fcs, struct bfa_port_cfg_s *port_cfg)
+{
+}
+
+struct bfa_fcs_port_s *
+bfa_fcs_get_base_port(struct bfa_fcs_s *fcs)
+{
+	return (&fcs->fabric.bport);
+}
+
+wwn_t
+bfa_fcs_port_get_rport(struct bfa_fcs_port_s *port, wwn_t wwn, int index,
+		       int nrports, bfa_boolean_t bwwn)
+{
+	struct list_head *qh, *qe;
+	struct bfa_fcs_rport_s *rport = NULL;
+	int             i;
+	struct bfa_fcs_s *fcs;
+
+	if (port == NULL || nrports == 0)
+		return (wwn_t) 0;
+
+	fcs = port->fcs;
+	bfa_trc(fcs, (u32) nrports);
+
+	i = 0;
+	qh = &port->rport_q;
+	qe = bfa_q_first(qh);
+
+	while ((qe != qh) && (i < nrports)) {
+		rport = (struct bfa_fcs_rport_s *)qe;
+		if (bfa_os_ntoh3b(rport->pid) > 0xFFF000) {
+			qe = bfa_q_next(qe);
+			bfa_trc(fcs, (u32) rport->pwwn);
+			bfa_trc(fcs, rport->pid);
+			bfa_trc(fcs, i);
+			continue;
+		}
+
+		if (bwwn) {
+			if (!memcmp(&wwn, &rport->pwwn, 8))
+				break;
+		} else {
+			if (i == index)
+				break;
+		}
+
+		i++;
+		qe = bfa_q_next(qe);
+	}
+
+	bfa_trc(fcs, i);
+	if (rport) {
+		return rport->pwwn;
+	} else {
+		return (wwn_t) 0;
+	}
+}
+
+void
+bfa_fcs_port_get_rports(struct bfa_fcs_port_s *port, wwn_t rport_wwns[],
+			int *nrports)
+{
+	struct list_head *qh, *qe;
+	struct bfa_fcs_rport_s *rport = NULL;
+	int             i;
+	struct bfa_fcs_s *fcs;
+
+	if (port == NULL || rport_wwns == NULL || *nrports == 0)
+		return;
+
+	fcs = port->fcs;
+	bfa_trc(fcs, (u32) *nrports);
+
+	i = 0;
+	qh = &port->rport_q;
+	qe = bfa_q_first(qh);
+
+	while ((qe != qh) && (i < *nrports)) {
+		rport = (struct bfa_fcs_rport_s *)qe;
+		if (bfa_os_ntoh3b(rport->pid) > 0xFFF000) {
+			qe = bfa_q_next(qe);
+			bfa_trc(fcs, (u32) rport->pwwn);
+			bfa_trc(fcs, rport->pid);
+			bfa_trc(fcs, i);
+			continue;
+		}
+
+		rport_wwns[i] = rport->pwwn;
+
+		i++;
+		qe = bfa_q_next(qe);
+	}
+
+	bfa_trc(fcs, i);
+	*nrports = i;
+	return;
+}
+
+/*
+ * Iterate's through all the rport's in the given port to
+ * determine the maximum operating speed.
+ */
+enum bfa_pport_speed
+bfa_fcs_port_get_rport_max_speed(struct bfa_fcs_port_s *port)
+{
+	struct list_head *qh, *qe;
+	struct bfa_fcs_rport_s *rport = NULL;
+	struct bfa_fcs_s *fcs;
+	enum bfa_pport_speed max_speed = 0;
+	struct bfa_pport_attr_s pport_attr;
+	enum bfa_pport_speed pport_speed;
+
+	if (port == NULL)
+		return 0;
+
+	fcs = port->fcs;
+
+	/*
+	 * Get Physical port's current speed
+	 */
+	bfa_pport_get_attr(port->fcs->bfa, &pport_attr);
+	pport_speed = pport_attr.speed;
+	bfa_trc(fcs, pport_speed);
+
+	qh = &port->rport_q;
+	qe = bfa_q_first(qh);
+
+	while (qe != qh) {
+		rport = (struct bfa_fcs_rport_s *)qe;
+		if ((bfa_os_ntoh3b(rport->pid) > 0xFFF000)
+		    || (bfa_fcs_rport_get_state(rport) == BFA_RPORT_OFFLINE)) {
+			qe = bfa_q_next(qe);
+			continue;
+		}
+
+		if ((rport->rpf.rpsc_speed == BFA_PPORT_SPEED_8GBPS)
+		    || (rport->rpf.rpsc_speed > pport_speed)) {
+			max_speed = rport->rpf.rpsc_speed;
+			break;
+		} else if (rport->rpf.rpsc_speed > max_speed) {
+			max_speed = rport->rpf.rpsc_speed;
+		}
+
+		qe = bfa_q_next(qe);
+	}
+
+	bfa_trc(fcs, max_speed);
+	return max_speed;
+}
+
+struct bfa_fcs_port_s *
+bfa_fcs_lookup_port(struct bfa_fcs_s *fcs, u16 vf_id, wwn_t lpwwn)
+{
+	struct bfa_fcs_vport_s *vport;
+	bfa_fcs_vf_t   *vf;
+
+	bfa_assert(fcs != NULL);
+
+	vf = bfa_fcs_vf_lookup(fcs, vf_id);
+	if (vf == NULL) {
+		bfa_trc(fcs, vf_id);
+		return (NULL);
+	}
+
+	if (!lpwwn || (vf->bport.port_cfg.pwwn == lpwwn))
+		return (&vf->bport);
+
+	vport = bfa_fcs_fabric_vport_lookup(vf, lpwwn);
+	if (vport)
+		return (&vport->lport);
+
+	return (NULL);
+}
+
+/*
+ *  API corresponding to VmWare's NPIV_VPORT_GETINFO.
+ */
+void
+bfa_fcs_port_get_info(struct bfa_fcs_port_s *port,
+		      struct bfa_port_info_s *port_info)
+{
+
+	bfa_trc(port->fcs, port->fabric->fabric_name);
+
+	if (port->vport == NULL) {
+		/*
+		 * This is a Physical port
+		 */
+		port_info->port_type = BFA_PORT_TYPE_PHYSICAL;
+
+		/*
+		 * @todo : need to fix the state & reason
+		 */
+		port_info->port_state = 0;
+		port_info->offline_reason = 0;
+
+		port_info->port_wwn = bfa_fcs_port_get_pwwn(port);
+		port_info->node_wwn = bfa_fcs_port_get_nwwn(port);
+
+		port_info->max_vports_supp = bfa_fcs_vport_get_max(port->fcs);
+		port_info->num_vports_inuse =
+			bfa_fcs_fabric_vport_count(port->fabric);
+		port_info->max_rports_supp = BFA_FCS_MAX_RPORTS_SUPP;
+		port_info->num_rports_inuse = port->num_rports;
+	} else {
+		/*
+		 * This is a virtual port
+		 */
+		port_info->port_type = BFA_PORT_TYPE_VIRTUAL;
+
+		/*
+		 * @todo : need to fix the state & reason
+		 */
+		port_info->port_state = 0;
+		port_info->offline_reason = 0;
+
+		port_info->port_wwn = bfa_fcs_port_get_pwwn(port);
+		port_info->node_wwn = bfa_fcs_port_get_nwwn(port);
+	}
+}
+
+void
+bfa_fcs_port_get_stats(struct bfa_fcs_port_s *fcs_port,
+		       struct bfa_port_stats_s *port_stats)
+{
+	bfa_os_memcpy(port_stats, &fcs_port->stats,
+		      sizeof(struct bfa_port_stats_s));
+	return;
+}
+
+void
+bfa_fcs_port_clear_stats(struct bfa_fcs_port_s *fcs_port)
+{
+	bfa_os_memset(&fcs_port->stats, 0, sizeof(struct bfa_port_stats_s));
+	return;
+}
+
+void
+bfa_fcs_port_enable_ipfc_roles(struct bfa_fcs_port_s *fcs_port)
+{
+	fcs_port->port_cfg.roles |= BFA_PORT_ROLE_FCP_IPFC;
+	return;
+}
+
+void
+bfa_fcs_port_disable_ipfc_roles(struct bfa_fcs_port_s *fcs_port)
+{
+	fcs_port->port_cfg.roles &= ~BFA_PORT_ROLE_FCP_IPFC;
+	return;
+}
+
+
diff --git a/drivers/scsi/bfa/lport_priv.h b/drivers/scsi/bfa/lport_priv.h
new file mode 100644
index 000000000000..dbae370a599a
--- /dev/null
+++ b/drivers/scsi/bfa/lport_priv.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __VP_PRIV_H__
+#define __VP_PRIV_H__
+
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_vport.h>
+
+/*
+ * Functions exported by vps
+ */
+void            bfa_fcs_vport_init(struct bfa_fcs_vport_s *vport);
+
+/*
+ * Functions exported by vps
+ */
+void            bfa_fcs_vps_online(struct bfa_fcs_port_s *port);
+void            bfa_fcs_vps_offline(struct bfa_fcs_port_s *port);
+void            bfa_fcs_vps_lip(struct bfa_fcs_port_s *port);
+
+/*
+ * Functions exported by port_fab
+ */
+void            bfa_fcs_port_fab_init(struct bfa_fcs_port_s *vport);
+void            bfa_fcs_port_fab_online(struct bfa_fcs_port_s *vport);
+void            bfa_fcs_port_fab_offline(struct bfa_fcs_port_s *vport);
+void            bfa_fcs_port_fab_rx_frame(struct bfa_fcs_port_s *port,
+					  u8 *rx_frame, u32 len);
+
+/*
+ * Functions exported by VP-NS.
+ */
+void            bfa_fcs_port_ns_init(struct bfa_fcs_port_s *vport);
+void            bfa_fcs_port_ns_offline(struct bfa_fcs_port_s *vport);
+void            bfa_fcs_port_ns_online(struct bfa_fcs_port_s *vport);
+void            bfa_fcs_port_ns_query(struct bfa_fcs_port_s *port);
+
+/*
+ * Functions exported by VP-SCN
+ */
+void            bfa_fcs_port_scn_init(struct bfa_fcs_port_s *vport);
+void            bfa_fcs_port_scn_offline(struct bfa_fcs_port_s *vport);
+void            bfa_fcs_port_scn_online(struct bfa_fcs_port_s *vport);
+void            bfa_fcs_port_scn_process_rscn(struct bfa_fcs_port_s *port,
+					      struct fchs_s *rx_frame, u32 len);
+
+/*
+ * Functions exported by VP-N2N
+ */
+
+void            bfa_fcs_port_n2n_init(struct bfa_fcs_port_s *port);
+void            bfa_fcs_port_n2n_online(struct bfa_fcs_port_s *port);
+void            bfa_fcs_port_n2n_offline(struct bfa_fcs_port_s *port);
+void            bfa_fcs_port_n2n_rx_frame(struct bfa_fcs_port_s *port,
+					  u8 *rx_frame, u32 len);
+
+/*
+ * Functions exported by VP-LOOP
+ */
+void            bfa_fcs_port_loop_init(struct bfa_fcs_port_s *port);
+void            bfa_fcs_port_loop_online(struct bfa_fcs_port_s *port);
+void            bfa_fcs_port_loop_offline(struct bfa_fcs_port_s *port);
+void            bfa_fcs_port_loop_lip(struct bfa_fcs_port_s *port);
+void            bfa_fcs_port_loop_rx_frame(struct bfa_fcs_port_s *port,
+					   u8 *rx_frame, u32 len);
+
+#endif /* __VP_PRIV_H__ */
diff --git a/drivers/scsi/bfa/ms.c b/drivers/scsi/bfa/ms.c
new file mode 100644
index 000000000000..c96b3ca007ae
--- /dev/null
+++ b/drivers/scsi/bfa/ms.c
@@ -0,0 +1,759 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, MS);
+
+#define BFA_FCS_MS_CMD_MAX_RETRIES  2
+/*
+ * forward declarations
+ */
+static void     bfa_fcs_port_ms_send_plogi(void *ms_cbarg,
+					   struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_ms_timeout(void *arg);
+static void     bfa_fcs_port_ms_plogi_response(void *fcsarg,
+					       struct bfa_fcxp_s *fcxp,
+					       void *cbarg,
+					       bfa_status_t req_status,
+					       u32 rsp_len,
+					       u32 resid_len,
+					       struct fchs_s *rsp_fchs);
+
+static void     bfa_fcs_port_ms_send_gmal(void *ms_cbarg,
+					  struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_ms_gmal_response(void *fcsarg,
+					      struct bfa_fcxp_s *fcxp,
+					      void *cbarg,
+					      bfa_status_t req_status,
+					      u32 rsp_len,
+					      u32 resid_len,
+					      struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_ms_send_gfn(void *ms_cbarg,
+					 struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_ms_gfn_response(void *fcsarg,
+					     struct bfa_fcxp_s *fcxp,
+					     void *cbarg,
+					     bfa_status_t req_status,
+					     u32 rsp_len,
+					     u32 resid_len,
+					     struct fchs_s *rsp_fchs);
+/**
+ *  fcs_ms_sm FCS MS state machine
+ */
+
+/**
+ *  MS State Machine events
+ */
+enum port_ms_event {
+	MSSM_EVENT_PORT_ONLINE = 1,
+	MSSM_EVENT_PORT_OFFLINE = 2,
+	MSSM_EVENT_RSP_OK = 3,
+	MSSM_EVENT_RSP_ERROR = 4,
+	MSSM_EVENT_TIMEOUT = 5,
+	MSSM_EVENT_FCXP_SENT = 6,
+	MSSM_EVENT_PORT_FABRIC_RSCN = 7
+};
+
+static void     bfa_fcs_port_ms_sm_offline(struct bfa_fcs_port_ms_s *ms,
+					   enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_plogi_sending(struct bfa_fcs_port_ms_s *ms,
+						 enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_plogi(struct bfa_fcs_port_ms_s *ms,
+					 enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_plogi_retry(struct bfa_fcs_port_ms_s *ms,
+					       enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_gmal_sending(struct bfa_fcs_port_ms_s *ms,
+						enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_gmal(struct bfa_fcs_port_ms_s *ms,
+					enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_gmal_retry(struct bfa_fcs_port_ms_s *ms,
+					      enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_gfn_sending(struct bfa_fcs_port_ms_s *ms,
+					       enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_gfn(struct bfa_fcs_port_ms_s *ms,
+				       enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_gfn_retry(struct bfa_fcs_port_ms_s *ms,
+					     enum port_ms_event event);
+static void     bfa_fcs_port_ms_sm_online(struct bfa_fcs_port_ms_s *ms,
+					  enum port_ms_event event);
+/**
+ * 		Start in offline state - awaiting NS to send start.
+ */
+static void
+bfa_fcs_port_ms_sm_offline(struct bfa_fcs_port_ms_s *ms,
+			   enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_PORT_ONLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_plogi_sending);
+		bfa_fcs_port_ms_send_plogi(ms, NULL);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ms_sm_plogi_sending(struct bfa_fcs_port_ms_s *ms,
+				 enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_plogi);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+				       &ms->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ms_sm_plogi(struct bfa_fcs_port_ms_s *ms, enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_RSP_ERROR:
+		/*
+		 * Start timer for a delayed retry
+		 */
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_plogi_retry);
+		bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ms->port), &ms->timer,
+				bfa_fcs_port_ms_timeout, ms,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case MSSM_EVENT_RSP_OK:
+		/*
+		 * since plogi is done, now invoke MS related sub-modules
+		 */
+		bfa_fcs_port_fdmi_online(ms);
+
+		/**
+		 * if this is a Vport, go to online state.
+		 */
+		if (ms->port->vport) {
+			bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_online);
+			break;
+		}
+
+		/*
+		 * For a base port we need to get the
+		 * switch's IP address.
+		 */
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gmal_sending);
+		bfa_fcs_port_ms_send_gmal(ms, NULL);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		bfa_fcxp_discard(ms->fcxp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ms_sm_plogi_retry(struct bfa_fcs_port_ms_s *ms,
+			       enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_TIMEOUT:
+		/*
+		 * Retry Timer Expired. Re-send
+		 */
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_plogi_sending);
+		bfa_fcs_port_ms_send_plogi(ms, NULL);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		bfa_timer_stop(&ms->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ms_sm_online(struct bfa_fcs_port_ms_s *ms,
+			  enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		/*
+		 * now invoke MS related sub-modules
+		 */
+		bfa_fcs_port_fdmi_offline(ms);
+		break;
+
+	case MSSM_EVENT_PORT_FABRIC_RSCN:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_sending);
+		ms->retry_cnt = 0;
+		bfa_fcs_port_ms_send_gfn(ms, NULL);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ms_sm_gmal_sending(struct bfa_fcs_port_ms_s *ms,
+				enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gmal);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+				       &ms->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ms_sm_gmal(struct bfa_fcs_port_ms_s *ms, enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_RSP_ERROR:
+		/*
+		 * Start timer for a delayed retry
+		 */
+		if (ms->retry_cnt++ < BFA_FCS_MS_CMD_MAX_RETRIES) {
+			bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gmal_retry);
+			bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+					&ms->timer, bfa_fcs_port_ms_timeout, ms,
+					BFA_FCS_RETRY_TIMEOUT);
+		} else {
+			bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_sending);
+			bfa_fcs_port_ms_send_gfn(ms, NULL);
+			ms->retry_cnt = 0;
+		}
+		break;
+
+	case MSSM_EVENT_RSP_OK:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_sending);
+		bfa_fcs_port_ms_send_gfn(ms, NULL);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		bfa_fcxp_discard(ms->fcxp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ms_sm_gmal_retry(struct bfa_fcs_port_ms_s *ms,
+			      enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_TIMEOUT:
+		/*
+		 * Retry Timer Expired. Re-send
+		 */
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gmal_sending);
+		bfa_fcs_port_ms_send_gmal(ms, NULL);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		bfa_timer_stop(&ms->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ *  ms_pvt MS local functions
+ */
+
+static void
+bfa_fcs_port_ms_send_gmal(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_ms_s *ms = ms_cbarg;
+	struct bfa_fcs_port_s *port = ms->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(port->fcs, port->pid);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &ms->fcxp_wqe,
+				    bfa_fcs_port_ms_send_gmal, ms);
+		return;
+	}
+	ms->fcxp = fcxp;
+
+	len = fc_gmal_req_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+				bfa_fcs_port_get_fcid(port),
+				bfa_lps_get_peer_nwwn(port->fabric->lps));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ms_gmal_response,
+		      (void *)ms, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	bfa_sm_send_event(ms, MSSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_port_ms_gmal_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+			      void *cbarg, bfa_status_t req_status,
+			      u32 rsp_len, u32 resid_len,
+			      struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_ms_s *ms = (struct bfa_fcs_port_ms_s *)cbarg;
+	struct bfa_fcs_port_s *port = ms->port;
+	struct ct_hdr_s       *cthdr = NULL;
+	struct fcgs_gmal_resp_s *gmal_resp;
+	struct fc_gmal_entry_s *gmal_entry;
+	u32        num_entries;
+	u8        *rsp_str;
+
+	bfa_trc(port->fcs, req_status);
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+		gmal_resp = (struct fcgs_gmal_resp_s *)(cthdr + 1);
+		num_entries = bfa_os_ntohl(gmal_resp->ms_len);
+		if (num_entries == 0) {
+			bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+			return;
+		}
+		/*
+		 * The response could contain multiple Entries.
+		 * Entries for SNMP interface, etc.
+		 * We look for the entry with a telnet prefix.
+		 * First "http://" entry refers to IP addr
+		 */
+
+		gmal_entry = (struct fc_gmal_entry_s *)gmal_resp->ms_ma;
+		while (num_entries > 0) {
+			if (strncmp
+			    (gmal_entry->prefix, CT_GMAL_RESP_PREFIX_HTTP,
+			     sizeof(gmal_entry->prefix)) == 0) {
+
+				/*
+				 * if the IP address is terminating with a '/',
+				 * remove it. *Byte 0 consists of the length
+				 * of the string.
+				 */
+				rsp_str = &(gmal_entry->prefix[0]);
+				if (rsp_str[gmal_entry->len - 1] == '/')
+					rsp_str[gmal_entry->len - 1] = 0;
+				/*
+				 * copy IP Address to fabric
+				 */
+				strncpy(bfa_fcs_port_get_fabric_ipaddr(port),
+					gmal_entry->ip_addr,
+					BFA_FCS_FABRIC_IPADDR_SZ);
+				break;
+			} else {
+				--num_entries;
+				++gmal_entry;
+			}
+		}
+
+		bfa_sm_send_event(ms, MSSM_EVENT_RSP_OK);
+		return;
+	}
+
+	bfa_trc(port->fcs, cthdr->reason_code);
+	bfa_trc(port->fcs, cthdr->exp_code);
+	bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+}
+
+static void
+bfa_fcs_port_ms_sm_gfn_sending(struct bfa_fcs_port_ms_s *ms,
+			       enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+				       &ms->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ms_sm_gfn(struct bfa_fcs_port_ms_s *ms, enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_RSP_ERROR:
+		/*
+		 * Start timer for a delayed retry
+		 */
+		if (ms->retry_cnt++ < BFA_FCS_MS_CMD_MAX_RETRIES) {
+			bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_retry);
+			bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+					&ms->timer, bfa_fcs_port_ms_timeout, ms,
+					BFA_FCS_RETRY_TIMEOUT);
+		} else {
+			bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_online);
+			ms->retry_cnt = 0;
+		}
+		break;
+
+	case MSSM_EVENT_RSP_OK:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_online);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		bfa_fcxp_discard(ms->fcxp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ms_sm_gfn_retry(struct bfa_fcs_port_ms_s *ms,
+			     enum port_ms_event event)
+{
+	bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+	bfa_trc(ms->port->fcs, event);
+
+	switch (event) {
+	case MSSM_EVENT_TIMEOUT:
+		/*
+		 * Retry Timer Expired. Re-send
+		 */
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_sending);
+		bfa_fcs_port_ms_send_gfn(ms, NULL);
+		break;
+
+	case MSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+		bfa_timer_stop(&ms->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ *  ms_pvt MS local functions
+ */
+
+static void
+bfa_fcs_port_ms_send_gfn(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_ms_s *ms = ms_cbarg;
+	struct bfa_fcs_port_s *port = ms->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(port->fcs, port->pid);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &ms->fcxp_wqe,
+				    bfa_fcs_port_ms_send_gfn, ms);
+		return;
+	}
+	ms->fcxp = fcxp;
+
+	len = fc_gfn_req_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+			       bfa_fcs_port_get_fcid(port),
+			       bfa_lps_get_peer_nwwn(port->fabric->lps));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ms_gfn_response,
+		      (void *)ms, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	bfa_sm_send_event(ms, MSSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_port_ms_gfn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+			     bfa_status_t req_status, u32 rsp_len,
+			       u32 resid_len, struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_ms_s *ms = (struct bfa_fcs_port_ms_s *)cbarg;
+	struct bfa_fcs_port_s *port = ms->port;
+	struct ct_hdr_s       *cthdr = NULL;
+	wwn_t          *gfn_resp;
+
+	bfa_trc(port->fcs, req_status);
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+		gfn_resp = (wwn_t *) (cthdr + 1);
+		/*
+		 * check if it has actually changed
+		 */
+		if ((memcmp
+		     ((void *)&bfa_fcs_port_get_fabric_name(port), gfn_resp,
+		      sizeof(wwn_t)) != 0))
+			bfa_fcs_fabric_set_fabric_name(port->fabric, *gfn_resp);
+		bfa_sm_send_event(ms, MSSM_EVENT_RSP_OK);
+		return;
+	}
+
+	bfa_trc(port->fcs, cthdr->reason_code);
+	bfa_trc(port->fcs, cthdr->exp_code);
+	bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+}
+
+/**
+ *  ms_pvt MS local functions
+ */
+
+static void
+bfa_fcs_port_ms_send_plogi(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_ms_s *ms = ms_cbarg;
+	struct bfa_fcs_port_s *port = ms->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(port->fcs, port->pid);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		port->stats.ms_plogi_alloc_wait++;
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &ms->fcxp_wqe,
+				    bfa_fcs_port_ms_send_plogi, ms);
+		return;
+	}
+	ms->fcxp = fcxp;
+
+	len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+			     bfa_os_hton3b(FC_MGMT_SERVER),
+			     bfa_fcs_port_get_fcid(port), 0,
+			     port->port_cfg.pwwn, port->port_cfg.nwwn,
+			     bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ms_plogi_response,
+		      (void *)ms, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	port->stats.ms_plogi_sent++;
+	bfa_sm_send_event(ms, MSSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_port_ms_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+			       void *cbarg, bfa_status_t req_status,
+			       u32 rsp_len, u32 resid_len,
+			       struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_ms_s *ms = (struct bfa_fcs_port_ms_s *)cbarg;
+
+	struct bfa_fcs_port_s *port = ms->port;
+	struct fc_els_cmd_s   *els_cmd;
+	struct fc_ls_rjt_s    *ls_rjt;
+
+	bfa_trc(port->fcs, req_status);
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		port->stats.ms_plogi_rsp_err++;
+		bfa_trc(port->fcs, req_status);
+		bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+	switch (els_cmd->els_code) {
+
+	case FC_ELS_ACC:
+		if (rsp_len < sizeof(struct fc_logi_s)) {
+			bfa_trc(port->fcs, rsp_len);
+			port->stats.ms_plogi_acc_err++;
+			bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+			break;
+		}
+		port->stats.ms_plogi_accepts++;
+		bfa_sm_send_event(ms, MSSM_EVENT_RSP_OK);
+		break;
+
+	case FC_ELS_LS_RJT:
+		ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+		bfa_trc(port->fcs, ls_rjt->reason_code);
+		bfa_trc(port->fcs, ls_rjt->reason_code_expl);
+
+		port->stats.ms_rejects++;
+		bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+		break;
+
+	default:
+		port->stats.ms_plogi_unknown_rsp++;
+		bfa_trc(port->fcs, els_cmd->els_code);
+		bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+	}
+}
+
+static void
+bfa_fcs_port_ms_timeout(void *arg)
+{
+	struct bfa_fcs_port_ms_s *ms = (struct bfa_fcs_port_ms_s *)arg;
+
+	ms->port->stats.ms_timeouts++;
+	bfa_sm_send_event(ms, MSSM_EVENT_TIMEOUT);
+}
+
+
+void
+bfa_fcs_port_ms_init(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_ms_s *ms = BFA_FCS_GET_MS_FROM_PORT(port);
+
+	ms->port = port;
+	bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+
+	/*
+	 * Invoke init routines of sub modules.
+	 */
+	bfa_fcs_port_fdmi_init(ms);
+}
+
+void
+bfa_fcs_port_ms_offline(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_ms_s *ms = BFA_FCS_GET_MS_FROM_PORT(port);
+
+	ms->port = port;
+	bfa_sm_send_event(ms, MSSM_EVENT_PORT_OFFLINE);
+}
+
+void
+bfa_fcs_port_ms_online(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_ms_s *ms = BFA_FCS_GET_MS_FROM_PORT(port);
+
+	ms->port = port;
+	bfa_sm_send_event(ms, MSSM_EVENT_PORT_ONLINE);
+}
+
+void
+bfa_fcs_port_ms_fabric_rscn(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_ms_s *ms = BFA_FCS_GET_MS_FROM_PORT(port);
+
+	/*
+	 * @todo.  Handle this only when in Online state
+	 */
+	if (bfa_sm_cmp_state(ms, bfa_fcs_port_ms_sm_online))
+		bfa_sm_send_event(ms, MSSM_EVENT_PORT_FABRIC_RSCN);
+}
diff --git a/drivers/scsi/bfa/n2n.c b/drivers/scsi/bfa/n2n.c
new file mode 100644
index 000000000000..735456824346
--- /dev/null
+++ b/drivers/scsi/bfa/n2n.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  n2n.c n2n implementation.
+ */
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, N2N);
+
+/**
+ *   Called by fcs/port to initialize N2N topology.
+ */
+void
+bfa_fcs_port_n2n_init(struct bfa_fcs_port_s *port)
+{
+}
+
+/**
+ *   Called by fcs/port to notify transition to online state.
+ */
+void
+bfa_fcs_port_n2n_online(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_n2n_s *n2n_port = &port->port_topo.pn2n;
+	struct bfa_port_cfg_s *pcfg = &port->port_cfg;
+	struct bfa_fcs_rport_s *rport;
+
+	bfa_trc(port->fcs, pcfg->pwwn);
+
+	/*
+	 * If our PWWN is > than that of the r-port, we have to initiate PLOGI
+	 * and assign an Address. if not, we need to wait for its PLOGI.
+	 *
+	 * If our PWWN is < than that of the remote port, it will send a PLOGI
+	 * with the PIDs assigned. The rport state machine take care of this
+	 * incoming PLOGI.
+	 */
+	if (memcmp
+	    ((void *)&pcfg->pwwn, (void *)&n2n_port->rem_port_wwn,
+	     sizeof(wwn_t)) > 0) {
+		port->pid = N2N_LOCAL_PID;
+		/**
+		 * First, check if we know the device by pwwn.
+		 */
+		rport = bfa_fcs_port_get_rport_by_pwwn(port,
+						       n2n_port->rem_port_wwn);
+		if (rport) {
+			bfa_trc(port->fcs, rport->pid);
+			bfa_trc(port->fcs, rport->pwwn);
+			rport->pid = N2N_REMOTE_PID;
+			bfa_fcs_rport_online(rport);
+			return;
+		}
+
+		/*
+		 * In n2n there can be only one rport. Delete the old one whose
+		 * pid should be zero, because it is offline.
+		 */
+		if (port->num_rports > 0) {
+			rport = bfa_fcs_port_get_rport_by_pid(port, 0);
+			bfa_assert(rport != NULL);
+			if (rport) {
+				bfa_trc(port->fcs, rport->pwwn);
+				bfa_fcs_rport_delete(rport);
+			}
+		}
+		bfa_fcs_rport_create(port, N2N_REMOTE_PID);
+	}
+}
+
+/**
+ *   Called by fcs/port to notify transition to offline state.
+ */
+void
+bfa_fcs_port_n2n_offline(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_n2n_s *n2n_port = &port->port_topo.pn2n;
+
+	bfa_trc(port->fcs, port->pid);
+	port->pid = 0;
+	n2n_port->rem_port_wwn = 0;
+	n2n_port->reply_oxid = 0;
+}
+
+
diff --git a/drivers/scsi/bfa/ns.c b/drivers/scsi/bfa/ns.c
new file mode 100644
index 000000000000..59fea99d67a4
--- /dev/null
+++ b/drivers/scsi/bfa/ns.c
@@ -0,0 +1,1243 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * @page ns_sm_info VPORT NS State Machine
+ *
+ * @section ns_sm_interactions VPORT NS State Machine Interactions
+ *
+ * @section ns_sm VPORT NS State Machine
+ * 	img ns_sm.jpg
+ */
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfa_iocfc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, NS);
+
+/*
+ * forward declarations
+ */
+static void     bfa_fcs_port_ns_send_plogi(void *ns_cbarg,
+					   struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_ns_send_rspn_id(void *ns_cbarg,
+					     struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_ns_send_rft_id(void *ns_cbarg,
+					    struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_ns_send_rff_id(void *ns_cbarg,
+					    struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_ns_send_gid_ft(void *ns_cbarg,
+					    struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_ns_timeout(void *arg);
+static void     bfa_fcs_port_ns_plogi_response(void *fcsarg,
+					       struct bfa_fcxp_s *fcxp,
+					       void *cbarg,
+					       bfa_status_t req_status,
+					       u32 rsp_len,
+					       u32 resid_len,
+					       struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_ns_rspn_id_response(void *fcsarg,
+						 struct bfa_fcxp_s *fcxp,
+						 void *cbarg,
+						 bfa_status_t req_status,
+						 u32 rsp_len,
+						 u32 resid_len,
+						 struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_ns_rft_id_response(void *fcsarg,
+						struct bfa_fcxp_s *fcxp,
+						void *cbarg,
+						bfa_status_t req_status,
+						u32 rsp_len,
+						u32 resid_len,
+						struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_ns_rff_id_response(void *fcsarg,
+						struct bfa_fcxp_s *fcxp,
+						void *cbarg,
+						bfa_status_t req_status,
+						u32 rsp_len,
+						u32 resid_len,
+						struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_ns_gid_ft_response(void *fcsarg,
+						struct bfa_fcxp_s *fcxp,
+						void *cbarg,
+						bfa_status_t req_status,
+						u32 rsp_len,
+						u32 resid_len,
+						struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_ns_process_gidft_pids(struct bfa_fcs_port_s *port,
+						   u32 *pid_buf,
+						   u32 n_pids);
+
+static void     bfa_fcs_port_ns_boot_target_disc(struct bfa_fcs_port_s *port);
+/**
+ *  fcs_ns_sm FCS nameserver interface state machine
+ */
+
+/**
+ * VPort NS State Machine events
+ */
+enum vport_ns_event {
+	NSSM_EVENT_PORT_ONLINE = 1,
+	NSSM_EVENT_PORT_OFFLINE = 2,
+	NSSM_EVENT_PLOGI_SENT = 3,
+	NSSM_EVENT_RSP_OK = 4,
+	NSSM_EVENT_RSP_ERROR = 5,
+	NSSM_EVENT_TIMEOUT = 6,
+	NSSM_EVENT_NS_QUERY = 7,
+	NSSM_EVENT_RSPNID_SENT = 8,
+	NSSM_EVENT_RFTID_SENT = 9,
+	NSSM_EVENT_RFFID_SENT = 10,
+	NSSM_EVENT_GIDFT_SENT = 11,
+};
+
+static void     bfa_fcs_port_ns_sm_offline(struct bfa_fcs_port_ns_s *ns,
+					   enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_plogi_sending(struct bfa_fcs_port_ns_s *ns,
+						 enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_plogi(struct bfa_fcs_port_ns_s *ns,
+					 enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_plogi_retry(struct bfa_fcs_port_ns_s *ns,
+					       enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_sending_rspn_id(struct bfa_fcs_port_ns_s *ns,
+						   enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_rspn_id(struct bfa_fcs_port_ns_s *ns,
+					   enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_rspn_id_retry(struct bfa_fcs_port_ns_s *ns,
+						 enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_sending_rft_id(struct bfa_fcs_port_ns_s *ns,
+						  enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_rft_id_retry(struct bfa_fcs_port_ns_s *ns,
+						enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_rft_id(struct bfa_fcs_port_ns_s *ns,
+					  enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_sending_rff_id(struct bfa_fcs_port_ns_s *ns,
+						  enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_rff_id_retry(struct bfa_fcs_port_ns_s *ns,
+						enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_rff_id(struct bfa_fcs_port_ns_s *ns,
+					  enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_sending_gid_ft(struct bfa_fcs_port_ns_s *ns,
+						  enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_gid_ft(struct bfa_fcs_port_ns_s *ns,
+					  enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_gid_ft_retry(struct bfa_fcs_port_ns_s *ns,
+						enum vport_ns_event event);
+static void     bfa_fcs_port_ns_sm_online(struct bfa_fcs_port_ns_s *ns,
+					  enum vport_ns_event event);
+/**
+ * 		Start in offline state - awaiting linkup
+ */
+static void
+bfa_fcs_port_ns_sm_offline(struct bfa_fcs_port_ns_s *ns,
+			   enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_PORT_ONLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_plogi_sending);
+		bfa_fcs_port_ns_send_plogi(ns, NULL);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_plogi_sending(struct bfa_fcs_port_ns_s *ns,
+				 enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_PLOGI_SENT:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_plogi);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+				       &ns->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_plogi(struct bfa_fcs_port_ns_s *ns,
+			 enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_RSP_ERROR:
+		/*
+		 * Start timer for a delayed retry
+		 */
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_plogi_retry);
+		ns->port->stats.ns_retries++;
+		bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+				bfa_fcs_port_ns_timeout, ns,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case NSSM_EVENT_RSP_OK:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rspn_id);
+		bfa_fcs_port_ns_send_rspn_id(ns, NULL);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_fcxp_discard(ns->fcxp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_plogi_retry(struct bfa_fcs_port_ns_s *ns,
+			       enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_TIMEOUT:
+		/*
+		 * Retry Timer Expired. Re-send
+		 */
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_plogi_sending);
+		bfa_fcs_port_ns_send_plogi(ns, NULL);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_timer_stop(&ns->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_sending_rspn_id(struct bfa_fcs_port_ns_s *ns,
+				   enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_RSPNID_SENT:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rspn_id);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+				       &ns->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_rspn_id(struct bfa_fcs_port_ns_s *ns,
+			   enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_RSP_ERROR:
+		/*
+		 * Start timer for a delayed retry
+		 */
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rspn_id_retry);
+		ns->port->stats.ns_retries++;
+		bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+				bfa_fcs_port_ns_timeout, ns,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case NSSM_EVENT_RSP_OK:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rft_id);
+		bfa_fcs_port_ns_send_rft_id(ns, NULL);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_fcxp_discard(ns->fcxp);
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_rspn_id_retry(struct bfa_fcs_port_ns_s *ns,
+				 enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_TIMEOUT:
+		/*
+		 * Retry Timer Expired. Re-send
+		 */
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rspn_id);
+		bfa_fcs_port_ns_send_rspn_id(ns, NULL);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_timer_stop(&ns->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_sending_rft_id(struct bfa_fcs_port_ns_s *ns,
+				  enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_RFTID_SENT:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rft_id);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+				       &ns->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_rft_id(struct bfa_fcs_port_ns_s *ns,
+			  enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_RSP_OK:
+		/*
+		 * Now move to register FC4 Features
+		 */
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rff_id);
+		bfa_fcs_port_ns_send_rff_id(ns, NULL);
+		break;
+
+	case NSSM_EVENT_RSP_ERROR:
+		/*
+		 * Start timer for a delayed retry
+		 */
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rft_id_retry);
+		ns->port->stats.ns_retries++;
+		bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+				bfa_fcs_port_ns_timeout, ns,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_fcxp_discard(ns->fcxp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_rft_id_retry(struct bfa_fcs_port_ns_s *ns,
+				enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_TIMEOUT:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rft_id);
+		bfa_fcs_port_ns_send_rft_id(ns, NULL);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_timer_stop(&ns->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_sending_rff_id(struct bfa_fcs_port_ns_s *ns,
+				  enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_RFFID_SENT:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rff_id);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+				       &ns->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_rff_id(struct bfa_fcs_port_ns_s *ns,
+			  enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_RSP_OK:
+
+		/*
+		 * If min cfg mode is enabled, we donot initiate rport
+		 * discovery with the fabric. Instead, we will retrieve the
+		 * boot targets from HAL/FW.
+		 */
+		if (__fcs_min_cfg(ns->port->fcs)) {
+			bfa_fcs_port_ns_boot_target_disc(ns->port);
+			bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_online);
+			return;
+		}
+
+		/*
+		 * If the port role is Initiator Mode issue NS query.
+		 * If it is Target Mode, skip this and go to online.
+		 */
+		if (BFA_FCS_VPORT_IS_INITIATOR_MODE(ns->port)) {
+			bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_gid_ft);
+			bfa_fcs_port_ns_send_gid_ft(ns, NULL);
+		} else if (BFA_FCS_VPORT_IS_TARGET_MODE(ns->port)) {
+			bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_online);
+		}
+		/*
+		 * kick off mgmt srvr state machine
+		 */
+		bfa_fcs_port_ms_online(ns->port);
+		break;
+
+	case NSSM_EVENT_RSP_ERROR:
+		/*
+		 * Start timer for a delayed retry
+		 */
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rff_id_retry);
+		ns->port->stats.ns_retries++;
+		bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+				bfa_fcs_port_ns_timeout, ns,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_fcxp_discard(ns->fcxp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_rff_id_retry(struct bfa_fcs_port_ns_s *ns,
+				enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_TIMEOUT:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rff_id);
+		bfa_fcs_port_ns_send_rff_id(ns, NULL);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_timer_stop(&ns->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+static void
+bfa_fcs_port_ns_sm_sending_gid_ft(struct bfa_fcs_port_ns_s *ns,
+				  enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_GIDFT_SENT:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_gid_ft);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+				       &ns->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_gid_ft(struct bfa_fcs_port_ns_s *ns,
+			  enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_RSP_OK:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_online);
+		break;
+
+	case NSSM_EVENT_RSP_ERROR:
+		/*
+		 * TBD: for certain reject codes, we don't need to retry
+		 */
+		/*
+		 * Start timer for a delayed retry
+		 */
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_gid_ft_retry);
+		ns->port->stats.ns_retries++;
+		bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+				bfa_fcs_port_ns_timeout, ns,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_fcxp_discard(ns->fcxp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_gid_ft_retry(struct bfa_fcs_port_ns_s *ns,
+				enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_TIMEOUT:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_gid_ft);
+		bfa_fcs_port_ns_send_gid_ft(ns, NULL);
+		break;
+
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		bfa_timer_stop(&ns->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_ns_sm_online(struct bfa_fcs_port_ns_s *ns,
+			  enum vport_ns_event event)
+{
+	bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+	bfa_trc(ns->port->fcs, event);
+
+	switch (event) {
+	case NSSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+		break;
+
+	case NSSM_EVENT_NS_QUERY:
+		/*
+		 * If the port role is Initiator Mode issue NS query.
+		 * If it is Target Mode, skip this and go to online.
+		 */
+		if (BFA_FCS_VPORT_IS_INITIATOR_MODE(ns->port)) {
+			bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_gid_ft);
+			bfa_fcs_port_ns_send_gid_ft(ns, NULL);
+		};
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  ns_pvt Nameserver local functions
+ */
+
+static void
+bfa_fcs_port_ns_send_plogi(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(port->fcs, port->pid);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		port->stats.ns_plogi_alloc_wait++;
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+				    bfa_fcs_port_ns_send_plogi, ns);
+		return;
+	}
+	ns->fcxp = fcxp;
+
+	len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+			     bfa_os_hton3b(FC_NAME_SERVER),
+			     bfa_fcs_port_get_fcid(port), 0,
+			     port->port_cfg.pwwn, port->port_cfg.nwwn,
+			     bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_plogi_response,
+		      (void *)ns, FC_MAX_PDUSZ, FC_RA_TOV);
+	port->stats.ns_plogi_sent++;
+
+	bfa_sm_send_event(ns, NSSM_EVENT_PLOGI_SENT);
+}
+
+static void
+bfa_fcs_port_ns_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+			       void *cbarg, bfa_status_t req_status,
+			       u32 rsp_len, u32 resid_len,
+			       struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	/* struct fc_logi_s *plogi_resp; */
+	struct fc_els_cmd_s   *els_cmd;
+	struct fc_ls_rjt_s    *ls_rjt;
+
+	bfa_trc(port->fcs, req_status);
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		port->stats.ns_plogi_rsp_err++;
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+	switch (els_cmd->els_code) {
+
+	case FC_ELS_ACC:
+		if (rsp_len < sizeof(struct fc_logi_s)) {
+			bfa_trc(port->fcs, rsp_len);
+			port->stats.ns_plogi_acc_err++;
+			bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+			break;
+		}
+		port->stats.ns_plogi_accepts++;
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+		break;
+
+	case FC_ELS_LS_RJT:
+		ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+		bfa_trc(port->fcs, ls_rjt->reason_code);
+		bfa_trc(port->fcs, ls_rjt->reason_code_expl);
+
+		port->stats.ns_rejects++;
+
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+		break;
+
+	default:
+		port->stats.ns_plogi_unknown_rsp++;
+		bfa_trc(port->fcs, els_cmd->els_code);
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+	}
+}
+
+/**
+ * Register the symbolic port name.
+ */
+static void
+bfa_fcs_port_ns_send_rspn_id(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+	u8         symbl[256];
+	u8        *psymbl = &symbl[0];
+
+	bfa_os_memset(symbl, 0, sizeof(symbl));
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		port->stats.ns_rspnid_alloc_wait++;
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+				    bfa_fcs_port_ns_send_rspn_id, ns);
+		return;
+	}
+	ns->fcxp = fcxp;
+
+	/*
+	 * for V-Port, form a Port Symbolic Name
+	 */
+	if (port->vport) {
+		/**For Vports,
+		 *  we append the vport's port symbolic name to that of the base port.
+		 */
+
+		strncpy((char *)psymbl,
+			(char *)
+			&(bfa_fcs_port_get_psym_name
+			  (bfa_fcs_get_base_port(port->fcs))),
+			strlen((char *)
+			       &bfa_fcs_port_get_psym_name(bfa_fcs_get_base_port
+							   (port->fcs))));
+
+		/*
+		 * Ensure we have a null terminating string.
+		 */
+		((char *)
+		 psymbl)[strlen((char *)
+				&bfa_fcs_port_get_psym_name
+				(bfa_fcs_get_base_port(port->fcs)))] = 0;
+
+		strncat((char *)psymbl,
+			(char *)&(bfa_fcs_port_get_psym_name(port)),
+			strlen((char *)&bfa_fcs_port_get_psym_name(port)));
+	} else {
+		psymbl = (u8 *) &(bfa_fcs_port_get_psym_name(port));
+	}
+
+	len = fc_rspnid_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+			      bfa_fcs_port_get_fcid(port), 0, psymbl);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_rspn_id_response,
+		      (void *)ns, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	port->stats.ns_rspnid_sent++;
+
+	bfa_sm_send_event(ns, NSSM_EVENT_RSPNID_SENT);
+}
+
+static void
+bfa_fcs_port_ns_rspn_id_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				 void *cbarg, bfa_status_t req_status,
+				 u32 rsp_len, u32 resid_len,
+				 struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	struct ct_hdr_s       *cthdr = NULL;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		port->stats.ns_rspnid_rsp_err++;
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+		port->stats.ns_rspnid_accepts++;
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+		return;
+	}
+
+	port->stats.ns_rspnid_rejects++;
+	bfa_trc(port->fcs, cthdr->reason_code);
+	bfa_trc(port->fcs, cthdr->exp_code);
+	bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+}
+
+/**
+ * Register FC4-Types
+ * TBD, Need to retrieve this from the OS driver, in case IPFC is enabled ?
+ */
+static void
+bfa_fcs_port_ns_send_rft_id(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		port->stats.ns_rftid_alloc_wait++;
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+				    bfa_fcs_port_ns_send_rft_id, ns);
+		return;
+	}
+	ns->fcxp = fcxp;
+
+	len = fc_rftid_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+			     bfa_fcs_port_get_fcid(port), 0,
+			     port->port_cfg.roles);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_rft_id_response,
+		      (void *)ns, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	port->stats.ns_rftid_sent++;
+	bfa_sm_send_event(ns, NSSM_EVENT_RFTID_SENT);
+}
+
+static void
+bfa_fcs_port_ns_rft_id_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				void *cbarg, bfa_status_t req_status,
+				u32 rsp_len, u32 resid_len,
+				struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	struct ct_hdr_s       *cthdr = NULL;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		port->stats.ns_rftid_rsp_err++;
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+		port->stats.ns_rftid_accepts++;
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+		return;
+	}
+
+	port->stats.ns_rftid_rejects++;
+	bfa_trc(port->fcs, cthdr->reason_code);
+	bfa_trc(port->fcs, cthdr->exp_code);
+	bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+}
+
+/**
+* Register FC4-Features : Should be done after RFT_ID
+ */
+static void
+bfa_fcs_port_ns_send_rff_id(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+	u8         fc4_ftrs = 0;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		port->stats.ns_rffid_alloc_wait++;
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+				    bfa_fcs_port_ns_send_rff_id, ns);
+		return;
+	}
+	ns->fcxp = fcxp;
+
+	if (BFA_FCS_VPORT_IS_INITIATOR_MODE(ns->port)) {
+		fc4_ftrs = FC_GS_FCP_FC4_FEATURE_INITIATOR;
+	} else if (BFA_FCS_VPORT_IS_TARGET_MODE(ns->port)) {
+		fc4_ftrs = FC_GS_FCP_FC4_FEATURE_TARGET;
+	}
+
+	len = fc_rffid_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+			     bfa_fcs_port_get_fcid(port), 0, FC_TYPE_FCP,
+			     fc4_ftrs);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_rff_id_response,
+		      (void *)ns, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	port->stats.ns_rffid_sent++;
+	bfa_sm_send_event(ns, NSSM_EVENT_RFFID_SENT);
+}
+
+static void
+bfa_fcs_port_ns_rff_id_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				void *cbarg, bfa_status_t req_status,
+				u32 rsp_len, u32 resid_len,
+				struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	struct ct_hdr_s       *cthdr = NULL;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		port->stats.ns_rffid_rsp_err++;
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+		port->stats.ns_rffid_accepts++;
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+		return;
+	}
+
+	port->stats.ns_rffid_rejects++;
+	bfa_trc(port->fcs, cthdr->reason_code);
+	bfa_trc(port->fcs, cthdr->exp_code);
+
+	if (cthdr->reason_code == CT_RSN_NOT_SUPP) {
+		/*
+		 * if this command is not supported, we don't retry
+		 */
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+	} else {
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+	}
+}
+
+/**
+ * Query Fabric for FC4-Types Devices.
+ *
+*  TBD : Need to use a local (FCS private) response buffer, since the response
+ * can be larger than 2K.
+ */
+static void
+bfa_fcs_port_ns_send_gid_ft(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(port->fcs, port->pid);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		port->stats.ns_gidft_alloc_wait++;
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+				    bfa_fcs_port_ns_send_gid_ft, ns);
+		return;
+	}
+	ns->fcxp = fcxp;
+
+	/*
+	 * This query is only initiated for FCP initiator mode.
+	 */
+	len = fc_gid_ft_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), ns->port->pid,
+			      FC_TYPE_FCP);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_gid_ft_response,
+		      (void *)ns, bfa_fcxp_get_maxrsp(port->fcs->bfa),
+		      FC_RA_TOV);
+
+	port->stats.ns_gidft_sent++;
+
+	bfa_sm_send_event(ns, NSSM_EVENT_GIDFT_SENT);
+}
+
+static void
+bfa_fcs_port_ns_gid_ft_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+				void *cbarg, bfa_status_t req_status,
+				u32 rsp_len, u32 resid_len,
+				struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+	struct bfa_fcs_port_s *port = ns->port;
+	struct ct_hdr_s       *cthdr = NULL;
+	u32        n_pids;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		port->stats.ns_gidft_rsp_err++;
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	if (resid_len != 0) {
+		/*
+		 * TBD : we will need to allocate a larger buffer & retry the
+		 * command
+		 */
+		bfa_trc(port->fcs, rsp_len);
+		bfa_trc(port->fcs, resid_len);
+		return;
+	}
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	switch (cthdr->cmd_rsp_code) {
+
+	case CT_RSP_ACCEPT:
+
+		port->stats.ns_gidft_accepts++;
+		n_pids = (fc_get_ctresp_pyld_len(rsp_len) / sizeof(u32));
+		bfa_trc(port->fcs, n_pids);
+		bfa_fcs_port_ns_process_gidft_pids(port,
+						   (u32 *) (cthdr + 1),
+						   n_pids);
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+		break;
+
+	case CT_RSP_REJECT:
+
+		/*
+		 * Check the reason code  & explanation.
+		 * There may not have been any FC4 devices in the fabric
+		 */
+		port->stats.ns_gidft_rejects++;
+		bfa_trc(port->fcs, cthdr->reason_code);
+		bfa_trc(port->fcs, cthdr->exp_code);
+
+		if ((cthdr->reason_code == CT_RSN_UNABLE_TO_PERF)
+		    && (cthdr->exp_code == CT_NS_EXP_FT_NOT_REG)) {
+
+			bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+		} else {
+			/*
+			 * for all other errors, retry
+			 */
+			bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+		}
+		break;
+
+	default:
+		port->stats.ns_gidft_unknown_rsp++;
+		bfa_trc(port->fcs, cthdr->cmd_rsp_code);
+		bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+	}
+}
+
+/**
+ *     This routine will be called by bfa_timer on timer timeouts.
+ *
+ * 	param[in] 	port 	- pointer to bfa_fcs_port_t.
+ *
+ * 	return
+ * 		void
+ *
+* 	Special Considerations:
+ *
+ * 	note
+ */
+static void
+bfa_fcs_port_ns_timeout(void *arg)
+{
+	struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)arg;
+
+	ns->port->stats.ns_timeouts++;
+	bfa_sm_send_event(ns, NSSM_EVENT_TIMEOUT);
+}
+
+/*
+ * Process the PID list in GID_FT response
+ */
+static void
+bfa_fcs_port_ns_process_gidft_pids(struct bfa_fcs_port_s *port,
+				   u32 *pid_buf, u32 n_pids)
+{
+	struct fcgs_gidft_resp_s *gidft_entry;
+	struct bfa_fcs_rport_s *rport;
+	u32        ii;
+
+	for (ii = 0; ii < n_pids; ii++) {
+		gidft_entry = (struct fcgs_gidft_resp_s *) &pid_buf[ii];
+
+		if (gidft_entry->pid == port->pid)
+			continue;
+
+		/*
+		 * Check if this rport already exists
+		 */
+		rport = bfa_fcs_port_get_rport_by_pid(port, gidft_entry->pid);
+		if (rport == NULL) {
+			/*
+			 * this is a new device. create rport
+			 */
+			rport = bfa_fcs_rport_create(port, gidft_entry->pid);
+		} else {
+			/*
+			 * this rport already exists
+			 */
+			bfa_fcs_rport_scn(rport);
+		}
+
+		bfa_trc(port->fcs, gidft_entry->pid);
+
+		/*
+		 * if the last entry bit is set, bail out.
+		 */
+		if (gidft_entry->last)
+			return;
+	}
+}
+
+/**
+ *  fcs_ns_public FCS nameserver public interfaces
+ */
+
+/*
+ * Functions called by port/fab.
+ * These will send relevant Events to the ns state machine.
+ */
+void
+bfa_fcs_port_ns_init(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_ns_s *ns = BFA_FCS_GET_NS_FROM_PORT(port);
+
+	ns->port = port;
+	bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+}
+
+void
+bfa_fcs_port_ns_offline(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_ns_s *ns = BFA_FCS_GET_NS_FROM_PORT(port);
+
+	ns->port = port;
+	bfa_sm_send_event(ns, NSSM_EVENT_PORT_OFFLINE);
+}
+
+void
+bfa_fcs_port_ns_online(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_ns_s *ns = BFA_FCS_GET_NS_FROM_PORT(port);
+
+	ns->port = port;
+	bfa_sm_send_event(ns, NSSM_EVENT_PORT_ONLINE);
+}
+
+void
+bfa_fcs_port_ns_query(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_ns_s *ns = BFA_FCS_GET_NS_FROM_PORT(port);
+
+	bfa_trc(port->fcs, port->pid);
+	bfa_sm_send_event(ns, NSSM_EVENT_NS_QUERY);
+}
+
+static void
+bfa_fcs_port_ns_boot_target_disc(struct bfa_fcs_port_s *port)
+{
+
+	struct bfa_fcs_rport_s *rport;
+	u8         nwwns;
+	wwn_t          *wwns;
+	int             ii;
+
+	bfa_iocfc_get_bootwwns(port->fcs->bfa, &nwwns, &wwns);
+
+	for (ii = 0; ii < nwwns; ++ii) {
+		rport = bfa_fcs_rport_create_by_wwn(port, wwns[ii]);
+		bfa_assert(rport);
+	}
+}
+
+
diff --git a/drivers/scsi/bfa/plog.c b/drivers/scsi/bfa/plog.c
new file mode 100644
index 000000000000..86af818d17bb
--- /dev/null
+++ b/drivers/scsi/bfa/plog.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_plog.h>
+#include <cs/bfa_debug.h>
+
+static int
+plkd_validate_logrec(struct bfa_plog_rec_s *pl_rec)
+{
+	if ((pl_rec->log_type != BFA_PL_LOG_TYPE_INT)
+	    && (pl_rec->log_type != BFA_PL_LOG_TYPE_STRING))
+		return 1;
+
+	if ((pl_rec->log_type != BFA_PL_LOG_TYPE_INT)
+	    && (pl_rec->log_num_ints > BFA_PL_INT_LOG_SZ))
+		return 1;
+
+	return 0;
+}
+
+static void
+bfa_plog_add(struct bfa_plog_s *plog, struct bfa_plog_rec_s *pl_rec)
+{
+	u16        tail;
+	struct bfa_plog_rec_s *pl_recp;
+
+	if (plog->plog_enabled == 0)
+		return;
+
+	if (plkd_validate_logrec(pl_rec)) {
+		bfa_assert(0);
+		return;
+	}
+
+	tail = plog->tail;
+
+	pl_recp = &(plog->plog_recs[tail]);
+
+	bfa_os_memcpy(pl_recp, pl_rec, sizeof(struct bfa_plog_rec_s));
+
+	pl_recp->tv = BFA_TRC_TS(plog);
+	BFA_PL_LOG_REC_INCR(plog->tail);
+
+	if (plog->head == plog->tail)
+		BFA_PL_LOG_REC_INCR(plog->head);
+}
+
+void
+bfa_plog_init(struct bfa_plog_s *plog)
+{
+	bfa_os_memset((char *)plog, 0, sizeof(struct bfa_plog_s));
+
+	bfa_os_memcpy(plog->plog_sig, BFA_PL_SIG_STR, BFA_PL_SIG_LEN);
+	plog->head = plog->tail = 0;
+	plog->plog_enabled = 1;
+}
+
+void
+bfa_plog_str(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+		enum bfa_plog_eid event,
+		u16 misc, char *log_str)
+{
+	struct bfa_plog_rec_s  lp;
+
+	if (plog->plog_enabled) {
+		bfa_os_memset(&lp, 0, sizeof(struct bfa_plog_rec_s));
+		lp.mid = mid;
+		lp.eid = event;
+		lp.log_type = BFA_PL_LOG_TYPE_STRING;
+		lp.misc = misc;
+		strncpy(lp.log_entry.string_log, log_str,
+			BFA_PL_STRING_LOG_SZ - 1);
+		lp.log_entry.string_log[BFA_PL_STRING_LOG_SZ - 1] = '\0';
+		bfa_plog_add(plog, &lp);
+	}
+}
+
+void
+bfa_plog_intarr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+		enum bfa_plog_eid event,
+		u16 misc, u32 *intarr, u32 num_ints)
+{
+	struct bfa_plog_rec_s  lp;
+	u32        i;
+
+	if (num_ints > BFA_PL_INT_LOG_SZ)
+		num_ints = BFA_PL_INT_LOG_SZ;
+
+	if (plog->plog_enabled) {
+		bfa_os_memset(&lp, 0, sizeof(struct bfa_plog_rec_s));
+		lp.mid = mid;
+		lp.eid = event;
+		lp.log_type = BFA_PL_LOG_TYPE_INT;
+		lp.misc = misc;
+
+		for (i = 0; i < num_ints; i++)
+			bfa_os_assign(lp.log_entry.int_log[i],
+					intarr[i]);
+
+		lp.log_num_ints = (u8) num_ints;
+
+		bfa_plog_add(plog, &lp);
+	}
+}
+
+void
+bfa_plog_fchdr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+			enum bfa_plog_eid event,
+			u16 misc, struct fchs_s *fchdr)
+{
+	struct bfa_plog_rec_s  lp;
+	u32       *tmp_int = (u32 *) fchdr;
+	u32        ints[BFA_PL_INT_LOG_SZ];
+
+	if (plog->plog_enabled) {
+		bfa_os_memset(&lp, 0, sizeof(struct bfa_plog_rec_s));
+
+		ints[0] = tmp_int[0];
+		ints[1] = tmp_int[1];
+		ints[2] = tmp_int[4];
+
+		bfa_plog_intarr(plog, mid, event, misc, ints, 3);
+	}
+}
+
+void
+bfa_plog_fchdr_and_pl(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+		      enum bfa_plog_eid event, u16 misc, struct fchs_s *fchdr,
+		      u32 pld_w0)
+{
+	struct bfa_plog_rec_s  lp;
+	u32       *tmp_int = (u32 *) fchdr;
+	u32        ints[BFA_PL_INT_LOG_SZ];
+
+	if (plog->plog_enabled) {
+		bfa_os_memset(&lp, 0, sizeof(struct bfa_plog_rec_s));
+
+		ints[0] = tmp_int[0];
+		ints[1] = tmp_int[1];
+		ints[2] = tmp_int[4];
+		ints[3] = pld_w0;
+
+		bfa_plog_intarr(plog, mid, event, misc, ints, 4);
+	}
+}
+
+void
+bfa_plog_clear(struct bfa_plog_s *plog)
+{
+	plog->head = plog->tail = 0;
+}
+
+void
+bfa_plog_enable(struct bfa_plog_s *plog)
+{
+	plog->plog_enabled = 1;
+}
+
+void
+bfa_plog_disable(struct bfa_plog_s *plog)
+{
+	plog->plog_enabled = 0;
+}
+
+bfa_boolean_t
+bfa_plog_get_setting(struct bfa_plog_s *plog)
+{
+	return((bfa_boolean_t)plog->plog_enabled);
+}
diff --git a/drivers/scsi/bfa/rport.c b/drivers/scsi/bfa/rport.c
new file mode 100644
index 000000000000..9cf58bb138dc
--- /dev/null
+++ b/drivers/scsi/bfa/rport.c
@@ -0,0 +1,2618 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  rport.c Remote port implementation.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcbuild.h"
+#include "fcs_vport.h"
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_fcpim.h"
+#include "fcs_fcptm.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+#include <fcb/bfa_fcb_rport.h>
+#include <aen/bfa_aen_rport.h>
+
+BFA_TRC_FILE(FCS, RPORT);
+
+#define BFA_FCS_RPORT_MAX_RETRIES		(5)
+
+/* In millisecs */
+static u32 bfa_fcs_rport_del_timeout =
+			BFA_FCS_RPORT_DEF_DEL_TIMEOUT * 1000;
+
+/*
+ * forward declarations
+ */
+static struct bfa_fcs_rport_s *bfa_fcs_rport_alloc(struct bfa_fcs_port_s *port,
+						   wwn_t pwwn, u32 rpid);
+static void     bfa_fcs_rport_free(struct bfa_fcs_rport_s *rport);
+static void     bfa_fcs_rport_hal_online(struct bfa_fcs_rport_s *rport);
+static void     bfa_fcs_rport_online_action(struct bfa_fcs_rport_s *rport);
+static void     bfa_fcs_rport_offline_action(struct bfa_fcs_rport_s *rport);
+static void     bfa_fcs_rport_update(struct bfa_fcs_rport_s *rport,
+				     struct fc_logi_s *plogi);
+static void     bfa_fcs_rport_fc4_pause(struct bfa_fcs_rport_s *rport);
+static void     bfa_fcs_rport_fc4_resume(struct bfa_fcs_rport_s *rport);
+static void     bfa_fcs_rport_timeout(void *arg);
+static void     bfa_fcs_rport_send_plogi(void *rport_cbarg,
+					 struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_rport_send_plogiacc(void *rport_cbarg,
+					    struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_rport_plogi_response(void *fcsarg,
+					     struct bfa_fcxp_s *fcxp,
+					     void *cbarg,
+					     bfa_status_t req_status,
+					     u32 rsp_len,
+					     u32 resid_len,
+					     struct fchs_s *rsp_fchs);
+static void     bfa_fcs_rport_send_adisc(void *rport_cbarg,
+					 struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_rport_adisc_response(void *fcsarg,
+					     struct bfa_fcxp_s *fcxp,
+					     void *cbarg,
+					     bfa_status_t req_status,
+					     u32 rsp_len,
+					     u32 resid_len,
+					     struct fchs_s *rsp_fchs);
+static void     bfa_fcs_rport_send_gidpn(void *rport_cbarg,
+					 struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_rport_gidpn_response(void *fcsarg,
+					     struct bfa_fcxp_s *fcxp,
+					     void *cbarg,
+					     bfa_status_t req_status,
+					     u32 rsp_len,
+					     u32 resid_len,
+					     struct fchs_s *rsp_fchs);
+static void     bfa_fcs_rport_send_logo(void *rport_cbarg,
+					struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_rport_send_logo_acc(void *rport_cbarg);
+static void     bfa_fcs_rport_process_prli(struct bfa_fcs_rport_s *rport,
+			struct fchs_s *rx_fchs, u16 len);
+static void     bfa_fcs_rport_send_ls_rjt(struct bfa_fcs_rport_s *rport,
+			struct fchs_s *rx_fchs, u8 reason_code,
+			u8 reason_code_expl);
+static void     bfa_fcs_rport_process_adisc(struct bfa_fcs_rport_s *rport,
+			struct fchs_s *rx_fchs, u16 len);
+/**
+ *  fcs_rport_sm FCS rport state machine events
+ */
+
+enum rport_event {
+	RPSM_EVENT_PLOGI_SEND = 1,	/*  new rport; start with PLOGI */
+	RPSM_EVENT_PLOGI_RCVD = 2,	/*  Inbound PLOGI from remote port */
+	RPSM_EVENT_PLOGI_COMP = 3,	/*  PLOGI completed to rport */
+	RPSM_EVENT_LOGO_RCVD = 4,	/*  LOGO from remote device */
+	RPSM_EVENT_LOGO_IMP = 5,	/*  implicit logo for SLER */
+	RPSM_EVENT_FCXP_SENT = 6,	/*  Frame from has been sent */
+	RPSM_EVENT_DELETE = 7,	/*  RPORT delete request */
+	RPSM_EVENT_SCN = 8,	/*  state change notification */
+	RPSM_EVENT_ACCEPTED = 9,/*  Good response from remote device */
+	RPSM_EVENT_FAILED = 10,	/*  Request to rport failed.  */
+	RPSM_EVENT_TIMEOUT = 11,	/*  Rport SM timeout event */
+	RPSM_EVENT_HCB_ONLINE = 12,	/*  BFA rport online callback */
+	RPSM_EVENT_HCB_OFFLINE = 13,	/*  BFA rport offline callback */
+	RPSM_EVENT_FC4_OFFLINE = 14,	/*  FC-4 offline complete */
+	RPSM_EVENT_ADDRESS_CHANGE = 15,	/*  Rport's PID has changed */
+	RPSM_EVENT_ADDRESS_DISC = 16	/*  Need to Discover rport's PID */
+};
+
+static void     bfa_fcs_rport_sm_uninit(struct bfa_fcs_rport_s *rport,
+					enum rport_event event);
+static void     bfa_fcs_rport_sm_plogi_sending(struct bfa_fcs_rport_s *rport,
+					       enum rport_event event);
+static void     bfa_fcs_rport_sm_plogiacc_sending(struct bfa_fcs_rport_s *rport,
+						  enum rport_event event);
+static void     bfa_fcs_rport_sm_plogi_retry(struct bfa_fcs_rport_s *rport,
+					     enum rport_event event);
+static void     bfa_fcs_rport_sm_plogi(struct bfa_fcs_rport_s *rport,
+				       enum rport_event event);
+static void     bfa_fcs_rport_sm_hal_online(struct bfa_fcs_rport_s *rport,
+					    enum rport_event event);
+static void     bfa_fcs_rport_sm_online(struct bfa_fcs_rport_s *rport,
+					enum rport_event event);
+static void     bfa_fcs_rport_sm_nsquery_sending(struct bfa_fcs_rport_s *rport,
+						 enum rport_event event);
+static void     bfa_fcs_rport_sm_nsquery(struct bfa_fcs_rport_s *rport,
+					 enum rport_event event);
+static void     bfa_fcs_rport_sm_adisc_sending(struct bfa_fcs_rport_s *rport,
+					       enum rport_event event);
+static void     bfa_fcs_rport_sm_adisc(struct bfa_fcs_rport_s *rport,
+				       enum rport_event event);
+static void     bfa_fcs_rport_sm_fc4_logorcv(struct bfa_fcs_rport_s *rport,
+					     enum rport_event event);
+static void     bfa_fcs_rport_sm_fc4_logosend(struct bfa_fcs_rport_s *rport,
+					      enum rport_event event);
+static void     bfa_fcs_rport_sm_fc4_offline(struct bfa_fcs_rport_s *rport,
+					     enum rport_event event);
+static void     bfa_fcs_rport_sm_hcb_offline(struct bfa_fcs_rport_s *rport,
+					     enum rport_event event);
+static void     bfa_fcs_rport_sm_hcb_logorcv(struct bfa_fcs_rport_s *rport,
+					     enum rport_event event);
+static void     bfa_fcs_rport_sm_hcb_logosend(struct bfa_fcs_rport_s *rport,
+					      enum rport_event event);
+static void     bfa_fcs_rport_sm_logo_sending(struct bfa_fcs_rport_s *rport,
+					      enum rport_event event);
+static void     bfa_fcs_rport_sm_offline(struct bfa_fcs_rport_s *rport,
+					 enum rport_event event);
+static void     bfa_fcs_rport_sm_nsdisc_sending(struct bfa_fcs_rport_s *rport,
+						enum rport_event event);
+static void     bfa_fcs_rport_sm_nsdisc_retry(struct bfa_fcs_rport_s *rport,
+					      enum rport_event event);
+static void     bfa_fcs_rport_sm_nsdisc_sent(struct bfa_fcs_rport_s *rport,
+					     enum rport_event event);
+static void     bfa_fcs_rport_sm_nsdisc_sent(struct bfa_fcs_rport_s *rport,
+					     enum rport_event event);
+
+static struct bfa_sm_table_s rport_sm_table[] = {
+	{BFA_SM(bfa_fcs_rport_sm_uninit), BFA_RPORT_UNINIT},
+	{BFA_SM(bfa_fcs_rport_sm_plogi_sending), BFA_RPORT_PLOGI},
+	{BFA_SM(bfa_fcs_rport_sm_plogiacc_sending), BFA_RPORT_ONLINE},
+	{BFA_SM(bfa_fcs_rport_sm_plogi_retry), BFA_RPORT_PLOGI_RETRY},
+	{BFA_SM(bfa_fcs_rport_sm_plogi), BFA_RPORT_PLOGI},
+	{BFA_SM(bfa_fcs_rport_sm_hal_online), BFA_RPORT_ONLINE},
+	{BFA_SM(bfa_fcs_rport_sm_online), BFA_RPORT_ONLINE},
+	{BFA_SM(bfa_fcs_rport_sm_nsquery_sending), BFA_RPORT_NSQUERY},
+	{BFA_SM(bfa_fcs_rport_sm_nsquery), BFA_RPORT_NSQUERY},
+	{BFA_SM(bfa_fcs_rport_sm_adisc_sending), BFA_RPORT_ADISC},
+	{BFA_SM(bfa_fcs_rport_sm_adisc), BFA_RPORT_ADISC},
+	{BFA_SM(bfa_fcs_rport_sm_fc4_logorcv), BFA_RPORT_LOGORCV},
+	{BFA_SM(bfa_fcs_rport_sm_fc4_logosend), BFA_RPORT_LOGO},
+	{BFA_SM(bfa_fcs_rport_sm_fc4_offline), BFA_RPORT_OFFLINE},
+	{BFA_SM(bfa_fcs_rport_sm_hcb_offline), BFA_RPORT_OFFLINE},
+	{BFA_SM(bfa_fcs_rport_sm_hcb_logorcv), BFA_RPORT_LOGORCV},
+	{BFA_SM(bfa_fcs_rport_sm_hcb_logosend), BFA_RPORT_LOGO},
+	{BFA_SM(bfa_fcs_rport_sm_logo_sending), BFA_RPORT_LOGO},
+	{BFA_SM(bfa_fcs_rport_sm_offline), BFA_RPORT_OFFLINE},
+	{BFA_SM(bfa_fcs_rport_sm_nsdisc_sending), BFA_RPORT_NSDISC},
+	{BFA_SM(bfa_fcs_rport_sm_nsdisc_retry), BFA_RPORT_NSDISC},
+	{BFA_SM(bfa_fcs_rport_sm_nsdisc_sent), BFA_RPORT_NSDISC},
+};
+
+/**
+ * 		Beginning state.
+ */
+static void
+bfa_fcs_rport_sm_uninit(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_PLOGI_SEND:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
+		rport->plogi_retries = 0;
+		bfa_fcs_rport_send_plogi(rport, NULL);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_PLOGI_COMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	case RPSM_EVENT_ADDRESS_CHANGE:
+	case RPSM_EVENT_ADDRESS_DISC:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+		rport->ns_retries = 0;
+		bfa_fcs_rport_send_gidpn(rport, NULL);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		PLOGI is being sent.
+ */
+static void
+bfa_fcs_rport_sm_plogi_sending(struct bfa_fcs_rport_s *rport,
+			       enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+		rport->ns_retries = 0;
+		bfa_fcs_rport_send_gidpn(rport, NULL);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		rport->pid = 0;
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_SCN:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		PLOGI is being sent.
+ */
+static void
+bfa_fcs_rport_sm_plogiacc_sending(struct bfa_fcs_rport_s *rport,
+				  enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+		/**
+		 * Ignore, SCN is possibly online notification.
+		 */
+		break;
+
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+		rport->ns_retries = 0;
+		bfa_fcs_rport_send_gidpn(rport, NULL);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		rport->pid = 0;
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_HCB_OFFLINE:
+		/**
+		 * Ignore BFA callback, on a PLOGI receive we call bfa offline.
+		 */
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		PLOGI is sent.
+ */
+static void
+bfa_fcs_rport_sm_plogi_retry(struct bfa_fcs_rport_s *rport,
+			enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_SCN:
+		bfa_timer_stop(&rport->timer);
+		/*
+		 * !! fall through !!
+		 */
+
+	case RPSM_EVENT_TIMEOUT:
+		rport->plogi_retries++;
+		if (rport->plogi_retries < BFA_FCS_RPORT_MAX_RETRIES) {
+			bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
+			bfa_fcs_rport_send_plogi(rport, NULL);
+		} else {
+			rport->pid = 0;
+			bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+			bfa_timer_start(rport->fcs->bfa, &rport->timer,
+					bfa_fcs_rport_timeout, rport,
+					bfa_fcs_rport_del_timeout);
+		}
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_timer_stop(&rport->timer);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_timer_stop(&rport->timer);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_timer_stop(&rport->timer);
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+		rport->ns_retries = 0;
+		bfa_fcs_rport_send_gidpn(rport, NULL);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		rport->pid = 0;
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_timer_stop(&rport->timer);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_PLOGI_COMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		bfa_timer_stop(&rport->timer);
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		PLOGI is sent.
+ */
+static void
+bfa_fcs_rport_sm_plogi(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_ACCEPTED:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		rport->plogi_retries = 0;
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		bfa_fcs_rport_send_logo_acc(rport);
+		bfa_fcxp_discard(rport->fcxp);
+		/*
+		 * !! fall through !!
+		 */
+	case RPSM_EVENT_FAILED:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_retry);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		rport->pid = 0;
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+		rport->ns_retries = 0;
+		bfa_fcs_rport_send_gidpn(rport, NULL);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_SCN:
+		/**
+		 * Ignore SCN - wait for PLOGI response.
+		 */
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_COMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		PLOGI is complete. Awaiting BFA rport online callback. FC-4s
+ * 		are offline.
+ */
+static void
+bfa_fcs_rport_sm_hal_online(struct bfa_fcs_rport_s *rport,
+			enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_HCB_ONLINE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_online);
+		bfa_fcs_rport_online_action(rport);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logorcv);
+		bfa_rport_offline(rport->bfa_rport);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_offline);
+		bfa_rport_offline(rport->bfa_rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_rport_offline(rport->bfa_rport);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logosend);
+		bfa_rport_offline(rport->bfa_rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+		/**
+		 * @todo
+		 * Ignore SCN - PLOGI just completed, FC-4 login should detect
+		 * device failures.
+		 */
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Rport is ONLINE. FC-4s active.
+ */
+static void
+bfa_fcs_rport_sm_online(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_SCN:
+		/**
+		 * Pause FC-4 activity till rport is authenticated.
+		 * In switched fabrics, check presence of device in nameserver
+		 * first.
+		 */
+		bfa_fcs_rport_fc4_pause(rport);
+
+		if (bfa_fcs_fabric_is_switched(rport->port->fabric)) {
+			bfa_sm_set_state(rport,
+					 bfa_fcs_rport_sm_nsquery_sending);
+			rport->ns_retries = 0;
+			bfa_fcs_rport_send_gidpn(rport, NULL);
+		} else {
+			bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc_sending);
+			bfa_fcs_rport_send_adisc(rport, NULL);
+		}
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+	case RPSM_EVENT_LOGO_IMP:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_COMP:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		An SCN event is received in ONLINE state. NS query is being sent
+ * 		prior to ADISC authentication with rport. FC-4s are paused.
+ */
+static void
+bfa_fcs_rport_sm_nsquery_sending(struct bfa_fcs_rport_s *rport,
+				 enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsquery);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+		/**
+		 * ignore SCN, wait for response to query itself
+		 */
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		rport->pid = 0;
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+	case RPSM_EVENT_PLOGI_COMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 	An SCN event is received in ONLINE state. NS query is sent to rport.
+ * 	FC-4s are paused.
+ */
+static void
+bfa_fcs_rport_sm_nsquery(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_ACCEPTED:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc_sending);
+		bfa_fcs_rport_send_adisc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_FAILED:
+		rport->ns_retries++;
+		if (rport->ns_retries < BFA_FCS_RPORT_MAX_RETRIES) {
+			bfa_sm_set_state(rport,
+					 bfa_fcs_rport_sm_nsquery_sending);
+			bfa_fcs_rport_send_gidpn(rport, NULL);
+		} else {
+			bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+			bfa_fcs_rport_offline_action(rport);
+		}
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_COMP:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+	case RPSM_EVENT_PLOGI_RCVD:
+	case RPSM_EVENT_LOGO_IMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 	An SCN event is received in ONLINE state. ADISC is being sent for
+ * 	authenticating with rport. FC-4s are paused.
+ */
+static void
+bfa_fcs_rport_sm_adisc_sending(struct bfa_fcs_rport_s *rport,
+			       enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		An SCN event is received in ONLINE state. ADISC is to rport.
+ * 		FC-4s are paused.
+ */
+static void
+bfa_fcs_rport_sm_adisc(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_ACCEPTED:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_online);
+		bfa_fcs_rport_fc4_resume(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		/**
+		 * Too complex to cleanup FC-4 & rport and then acc to PLOGI.
+		 * At least go offline when a PLOGI is received.
+		 */
+		bfa_fcxp_discard(rport->fcxp);
+		/*
+		 * !!! fall through !!!
+		 */
+
+	case RPSM_EVENT_FAILED:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+		/**
+		 * already processing RSCN
+		 */
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_offline_action(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Rport has sent LOGO. Awaiting FC-4 offline completion callback.
+ */
+static void
+bfa_fcs_rport_sm_fc4_logorcv(struct bfa_fcs_rport_s *rport,
+			enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FC4_OFFLINE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logorcv);
+		bfa_rport_offline(rport->bfa_rport);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		LOGO needs to be sent to rport. Awaiting FC-4 offline completion
+ * 		callback.
+ */
+static void
+bfa_fcs_rport_sm_fc4_logosend(struct bfa_fcs_rport_s *rport,
+			      enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FC4_OFFLINE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logosend);
+		bfa_rport_offline(rport->bfa_rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 	Rport is going offline. Awaiting FC-4 offline completion callback.
+ */
+static void
+bfa_fcs_rport_sm_fc4_offline(struct bfa_fcs_rport_s *rport,
+			enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FC4_OFFLINE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_offline);
+		bfa_rport_offline(rport->bfa_rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_LOGO_IMP:
+	case RPSM_EVENT_LOGO_RCVD:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		/**
+		 * rport is already going offline.
+		 * SCN - ignore and wait till transitioning to offline state
+		 */
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Rport is offline. FC-4s are offline. Awaiting BFA rport offline
+ * 		callback.
+ */
+static void
+bfa_fcs_rport_sm_hcb_offline(struct bfa_fcs_rport_s *rport,
+			enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_HCB_OFFLINE:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		if (bfa_fcs_port_is_online(rport->port)) {
+			bfa_sm_set_state(rport,
+					 bfa_fcs_rport_sm_nsdisc_sending);
+			rport->ns_retries = 0;
+			bfa_fcs_rport_send_gidpn(rport, NULL);
+		} else {
+			rport->pid = 0;
+			bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+			bfa_timer_start(rport->fcs->bfa, &rport->timer,
+					bfa_fcs_rport_timeout, rport,
+					bfa_fcs_rport_del_timeout);
+		}
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_LOGO_RCVD:
+		/**
+		 * Ignore, already offline.
+		 */
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Rport is offline. FC-4s are offline. Awaiting BFA rport offline
+ * 		callback to send LOGO accept.
+ */
+static void
+bfa_fcs_rport_sm_hcb_logorcv(struct bfa_fcs_rport_s *rport,
+			enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_HCB_OFFLINE:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		if (rport->pid)
+			bfa_fcs_rport_send_logo_acc(rport);
+		/*
+		 * If the lport is online and if the rport is not a well known
+		 * address port, we try to re-discover the r-port.
+		 */
+		if (bfa_fcs_port_is_online(rport->port)
+		    && (!BFA_FCS_PID_IS_WKA(rport->pid))) {
+			bfa_sm_set_state(rport,
+					 bfa_fcs_rport_sm_nsdisc_sending);
+			rport->ns_retries = 0;
+			bfa_fcs_rport_send_gidpn(rport, NULL);
+		} else {
+			/*
+			 * if it is not a well known address, reset the pid to
+			 *
+			 */
+			if (!BFA_FCS_PID_IS_WKA(rport->pid))
+				rport->pid = 0;
+			bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+			bfa_timer_start(rport->fcs->bfa, &rport->timer,
+					bfa_fcs_rport_timeout, rport,
+					bfa_fcs_rport_del_timeout);
+		}
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logosend);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_offline);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		/**
+		 * Ignore - already processing a LOGO.
+		 */
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Rport is being deleted. FC-4s are offline. Awaiting BFA rport offline
+ * callback to send LOGO.
+ */
+static void
+bfa_fcs_rport_sm_hcb_logosend(struct bfa_fcs_rport_s *rport,
+			      enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_HCB_OFFLINE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_logo_sending);
+		bfa_fcs_rport_send_logo(rport, NULL);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Rport is being deleted. FC-4s are offline. LOGO is being sent.
+ */
+static void
+bfa_fcs_rport_sm_logo_sending(struct bfa_fcs_rport_s *rport,
+			      enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FCXP_SENT:
+		/*
+		 * Once LOGO is sent, we donot wait for the response
+		 */
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Rport is offline. FC-4s are offline. BFA rport is offline.
+ * 		Timer active to delete stale rport.
+ */
+static void
+bfa_fcs_rport_sm_offline(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_TIMEOUT:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+		bfa_timer_stop(&rport->timer);
+		rport->ns_retries = 0;
+		bfa_fcs_rport_send_gidpn(rport, NULL);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_timer_stop(&rport->timer);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_timer_stop(&rport->timer);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+	case RPSM_EVENT_LOGO_IMP:
+		break;
+
+	case RPSM_EVENT_PLOGI_COMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		bfa_timer_stop(&rport->timer);
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_SEND:
+		bfa_timer_stop(&rport->timer);
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
+		rport->plogi_retries = 0;
+		bfa_fcs_rport_send_plogi(rport, NULL);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 	Rport address has changed. Nameserver discovery request is being sent.
+ */
+static void
+bfa_fcs_rport_sm_nsdisc_sending(struct bfa_fcs_rport_s *rport,
+				enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sent);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_LOGO_RCVD:
+	case RPSM_EVENT_PLOGI_SEND:
+		break;
+
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		rport->ns_retries = 0;	/* reset the retry count */
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_PLOGI_COMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * 		Nameserver discovery failed. Waiting for timeout to retry.
+ */
+static void
+bfa_fcs_rport_sm_nsdisc_retry(struct bfa_fcs_rport_s *rport,
+			      enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_TIMEOUT:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+		bfa_fcs_rport_send_gidpn(rport, NULL);
+		break;
+
+	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+		bfa_timer_stop(&rport->timer);
+		rport->ns_retries = 0;
+		bfa_fcs_rport_send_gidpn(rport, NULL);
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_timer_stop(&rport->timer);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_timer_stop(&rport->timer);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		rport->pid = 0;
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_timer_stop(&rport->timer);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		bfa_fcs_rport_send_logo_acc(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_COMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		bfa_timer_stop(&rport->timer);
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Rport address has changed. Nameserver discovery request is sent.
+ */
+static void
+bfa_fcs_rport_sm_nsdisc_sent(struct bfa_fcs_rport_s *rport,
+			enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_ACCEPTED:
+	case RPSM_EVENT_ADDRESS_CHANGE:
+		if (rport->pid) {
+			bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
+			bfa_fcs_rport_send_plogi(rport, NULL);
+		} else {
+			bfa_sm_set_state(rport,
+					 bfa_fcs_rport_sm_nsdisc_sending);
+			rport->ns_retries = 0;
+			bfa_fcs_rport_send_gidpn(rport, NULL);
+		}
+		break;
+
+	case RPSM_EVENT_FAILED:
+		rport->ns_retries++;
+		if (rport->ns_retries < BFA_FCS_RPORT_MAX_RETRIES) {
+			bfa_sm_set_state(rport,
+					 bfa_fcs_rport_sm_nsdisc_sending);
+			bfa_fcs_rport_send_gidpn(rport, NULL);
+		} else {
+			rport->pid = 0;
+			bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+			bfa_timer_start(rport->fcs->bfa, &rport->timer,
+					bfa_fcs_rport_timeout, rport,
+					bfa_fcs_rport_del_timeout);
+		};
+		break;
+
+	case RPSM_EVENT_DELETE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_free(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_LOGO_IMP:
+		rport->pid = 0;
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_SCN:
+		/**
+		 * ignore, wait for NS query response
+		 */
+		break;
+
+	case RPSM_EVENT_LOGO_RCVD:
+		/**
+		 * Not logged-in yet. Accept LOGO.
+		 */
+		bfa_fcs_rport_send_logo_acc(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_COMP:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  fcs_rport_private FCS RPORT provate functions
+ */
+
+static void
+bfa_fcs_rport_send_plogi(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_rport_s *rport = rport_cbarg;
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+				    bfa_fcs_rport_send_plogi, rport);
+		return;
+	}
+	rport->fcxp = fcxp;
+
+	len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+			     bfa_fcs_port_get_fcid(port), 0,
+			     port->port_cfg.pwwn, port->port_cfg.nwwn,
+			     bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_rport_plogi_response,
+		      (void *)rport, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	rport->stats.plogis++;
+	bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_rport_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+			     bfa_status_t req_status, u32 rsp_len,
+			     u32 resid_len, struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+	struct fc_logi_s	*plogi_rsp;
+	struct fc_ls_rjt_s	*ls_rjt;
+	struct bfa_fcs_rport_s *twin;
+	struct list_head *qe;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(rport->fcs, req_status);
+		rport->stats.plogi_failed++;
+		bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+		return;
+	}
+
+	plogi_rsp = (struct fc_logi_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+	/**
+	 * Check for failure first.
+	 */
+	if (plogi_rsp->els_cmd.els_code != FC_ELS_ACC) {
+		ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+		bfa_trc(rport->fcs, ls_rjt->reason_code);
+		bfa_trc(rport->fcs, ls_rjt->reason_code_expl);
+
+		rport->stats.plogi_rejects++;
+		bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+		return;
+	}
+
+	/**
+	 * PLOGI is complete. Make sure this device is not one of the known
+	 * device with a new FC port address.
+	 */
+	list_for_each(qe, &rport->port->rport_q) {
+		twin = (struct bfa_fcs_rport_s *)qe;
+		if (twin == rport)
+			continue;
+		if (!rport->pwwn && (plogi_rsp->port_name == twin->pwwn)) {
+			bfa_trc(rport->fcs, twin->pid);
+			bfa_trc(rport->fcs, rport->pid);
+
+			/*
+			 * Update plogi stats in twin
+			 */
+			twin->stats.plogis += rport->stats.plogis;
+			twin->stats.plogi_rejects += rport->stats.plogi_rejects;
+			twin->stats.plogi_timeouts +=
+				rport->stats.plogi_timeouts;
+			twin->stats.plogi_failed += rport->stats.plogi_failed;
+			twin->stats.plogi_rcvd += rport->stats.plogi_rcvd;
+			twin->stats.plogi_accs++;
+
+			bfa_fcs_rport_delete(rport);
+
+			bfa_fcs_rport_update(twin, plogi_rsp);
+			twin->pid = rsp_fchs->s_id;
+			bfa_sm_send_event(twin, RPSM_EVENT_PLOGI_COMP);
+			return;
+		}
+	}
+
+	/**
+	 * Normal login path -- no evil twins.
+	 */
+	rport->stats.plogi_accs++;
+	bfa_fcs_rport_update(rport, plogi_rsp);
+	bfa_sm_send_event(rport, RPSM_EVENT_ACCEPTED);
+}
+
+static void
+bfa_fcs_rport_send_plogiacc(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_rport_s *rport = rport_cbarg;
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->reply_oxid);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+				    bfa_fcs_rport_send_plogiacc, rport);
+		return;
+	}
+	rport->fcxp = fcxp;
+
+	len = fc_plogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+				 bfa_fcs_port_get_fcid(port), rport->reply_oxid,
+				 port->port_cfg.pwwn, port->port_cfg.nwwn,
+				 bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+
+	bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_rport_send_adisc(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_rport_s *rport = rport_cbarg;
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+				    bfa_fcs_rport_send_adisc, rport);
+		return;
+	}
+	rport->fcxp = fcxp;
+
+	len = fc_adisc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+			     bfa_fcs_port_get_fcid(port), 0,
+			     port->port_cfg.pwwn, port->port_cfg.nwwn);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_rport_adisc_response,
+		      rport, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	rport->stats.adisc_sent++;
+	bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_rport_adisc_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+			     bfa_status_t req_status, u32 rsp_len,
+			     u32 resid_len, struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+	void           *pld = bfa_fcxp_get_rspbuf(fcxp);
+	struct fc_ls_rjt_s    *ls_rjt;
+
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(rport->fcs, req_status);
+		rport->stats.adisc_failed++;
+		bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+		return;
+	}
+
+	if (fc_adisc_rsp_parse((struct fc_adisc_s *)pld, rsp_len, rport->pwwn,
+		rport->nwwn)  == FC_PARSE_OK) {
+		rport->stats.adisc_accs++;
+		bfa_sm_send_event(rport, RPSM_EVENT_ACCEPTED);
+		return;
+	}
+
+	rport->stats.adisc_rejects++;
+	ls_rjt = pld;
+	bfa_trc(rport->fcs, ls_rjt->els_cmd.els_code);
+	bfa_trc(rport->fcs, ls_rjt->reason_code);
+	bfa_trc(rport->fcs, ls_rjt->reason_code_expl);
+	bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+}
+
+static void
+bfa_fcs_rport_send_gidpn(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_rport_s *rport = rport_cbarg;
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	int             len;
+
+	bfa_trc(rport->fcs, rport->pid);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+				    bfa_fcs_rport_send_gidpn, rport);
+		return;
+	}
+	rport->fcxp = fcxp;
+
+	len = fc_gidpn_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+			     bfa_fcs_port_get_fcid(port), 0, rport->pwwn);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_rport_gidpn_response,
+		      (void *)rport, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+			     bfa_status_t req_status, u32 rsp_len,
+			     u32 resid_len, struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+	struct bfa_fcs_rport_s *twin;
+	struct list_head *qe;
+	struct ct_hdr_s       	*cthdr;
+	struct fcgs_gidpn_resp_s	*gidpn_rsp;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+
+	cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+	cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+	if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+		/*
+		 * Check if the pid is the same as before.
+		 */
+		gidpn_rsp = (struct fcgs_gidpn_resp_s *) (cthdr + 1);
+
+		if (gidpn_rsp->dap == rport->pid) {
+			/*
+			 * Device is online
+			 */
+			bfa_sm_send_event(rport, RPSM_EVENT_ACCEPTED);
+		} else {
+			/*
+			 * Device's PID has changed. We need to cleanup and
+			 * re-login. If there is another device with the the
+			 * newly discovered pid, send an scn notice so that its
+			 * new pid can be discovered.
+			 */
+			list_for_each(qe, &rport->port->rport_q) {
+				twin = (struct bfa_fcs_rport_s *)qe;
+				if (twin == rport)
+					continue;
+				if (gidpn_rsp->dap == twin->pid) {
+					bfa_trc(rport->fcs, twin->pid);
+					bfa_trc(rport->fcs, rport->pid);
+
+					twin->pid = 0;
+					bfa_sm_send_event(twin,
+						RPSM_EVENT_ADDRESS_CHANGE);
+				}
+			}
+			rport->pid = gidpn_rsp->dap;
+			bfa_sm_send_event(rport, RPSM_EVENT_ADDRESS_CHANGE);
+		}
+		return;
+	}
+
+	/*
+	 * Reject Response
+	 */
+	switch (cthdr->reason_code) {
+	case CT_RSN_LOGICAL_BUSY:
+		/*
+		 * Need to retry
+		 */
+		bfa_sm_send_event(rport, RPSM_EVENT_TIMEOUT);
+		break;
+
+	case CT_RSN_UNABLE_TO_PERF:
+		/*
+		 * device doesn't exist : Start timer to cleanup this later.
+		 */
+		bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+		break;
+
+	default:
+		bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+		break;
+	}
+}
+
+/**
+ *    Called to send a logout to the rport.
+ */
+static void
+bfa_fcs_rport_send_logo(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_rport_s *rport = rport_cbarg;
+	struct bfa_fcs_port_s *port;
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	u16        len;
+
+	bfa_trc(rport->fcs, rport->pid);
+
+	port = rport->port;
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+				    bfa_fcs_rport_send_logo, rport);
+		return;
+	}
+	rport->fcxp = fcxp;
+
+	len = fc_logo_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+			    bfa_fcs_port_get_fcid(port), 0,
+			    bfa_fcs_port_get_pwwn(port));
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, NULL, rport, FC_MAX_PDUSZ,
+		      FC_ED_TOV);
+
+	rport->stats.logos++;
+	bfa_fcxp_discard(rport->fcxp);
+	bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+/**
+ *    Send ACC for a LOGO received.
+ */
+static void
+bfa_fcs_rport_send_logo_acc(void *rport_cbarg)
+{
+	struct bfa_fcs_rport_s *rport = rport_cbarg;
+	struct bfa_fcs_port_s *port;
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	u16        len;
+
+	bfa_trc(rport->fcs, rport->pid);
+
+	port = rport->port;
+
+	fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp)
+		return;
+
+	rport->stats.logo_rcvd++;
+	len = fc_logo_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+				bfa_fcs_port_get_fcid(port), rport->reply_oxid);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+}
+
+/**
+ *     This routine will be called by bfa_timer on timer timeouts.
+ *
+ * 	param[in] 	rport 			- pointer to bfa_fcs_port_ns_t.
+ * 	param[out]	rport_status 	- pointer to return vport status in
+ *
+ * 	return
+ * 		void
+ *
+*  	Special Considerations:
+ *
+ * 	note
+ */
+static void
+bfa_fcs_rport_timeout(void *arg)
+{
+	struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)arg;
+
+	rport->stats.plogi_timeouts++;
+	bfa_sm_send_event(rport, RPSM_EVENT_TIMEOUT);
+}
+
+static void
+bfa_fcs_rport_process_prli(struct bfa_fcs_rport_s *rport,
+			struct fchs_s *rx_fchs, u16 len)
+{
+	struct bfa_fcxp_s *fcxp;
+	struct fchs_s          fchs;
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fc_prli_s      *prli;
+
+	bfa_trc(port->fcs, rx_fchs->s_id);
+	bfa_trc(port->fcs, rx_fchs->d_id);
+
+	rport->stats.prli_rcvd++;
+
+	if (BFA_FCS_VPORT_IS_TARGET_MODE(port)) {
+		/*
+		 * Target Mode : Let the fcptm handle it
+		 */
+		bfa_fcs_tin_rx_prli(rport->tin, rx_fchs, len);
+		return;
+	}
+
+	/*
+	 * We are either in Initiator or ipfc Mode
+	 */
+	prli = (struct fc_prli_s *) (rx_fchs + 1);
+
+	if (prli->parampage.servparams.initiator) {
+		bfa_trc(rport->fcs, prli->parampage.type);
+		rport->scsi_function = BFA_RPORT_INITIATOR;
+		bfa_fcs_itnim_is_initiator(rport->itnim);
+	} else {
+		/*
+		 * @todo: PRLI from a target ?
+		 */
+		bfa_trc(port->fcs, rx_fchs->s_id);
+		rport->scsi_function = BFA_RPORT_TARGET;
+	}
+
+	fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp)
+		return;
+
+	len = fc_prli_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+				bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+				port->port_cfg.roles);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+}
+
+static void
+bfa_fcs_rport_process_rpsc(struct bfa_fcs_rport_s *rport,
+			struct fchs_s *rx_fchs, u16 len)
+{
+	struct bfa_fcxp_s *fcxp;
+	struct fchs_s          fchs;
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fc_rpsc_speed_info_s speeds;
+	struct bfa_pport_attr_s pport_attr;
+
+	bfa_trc(port->fcs, rx_fchs->s_id);
+	bfa_trc(port->fcs, rx_fchs->d_id);
+
+	rport->stats.rpsc_rcvd++;
+	speeds.port_speed_cap =
+		RPSC_SPEED_CAP_1G | RPSC_SPEED_CAP_2G | RPSC_SPEED_CAP_4G |
+		RPSC_SPEED_CAP_8G;
+
+	/*
+	 * get curent speed from pport attributes from BFA
+	 */
+	bfa_pport_get_attr(port->fcs->bfa, &pport_attr);
+
+	speeds.port_op_speed = fc_bfa_speed_to_rpsc_operspeed(pport_attr.speed);
+
+	fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp)
+		return;
+
+	len = fc_rpsc_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+				bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+				&speeds);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+}
+
+static void
+bfa_fcs_rport_process_adisc(struct bfa_fcs_rport_s *rport,
+			struct fchs_s *rx_fchs, u16 len)
+{
+	struct bfa_fcxp_s *fcxp;
+	struct fchs_s          fchs;
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fc_adisc_s      *adisc;
+
+	bfa_trc(port->fcs, rx_fchs->s_id);
+	bfa_trc(port->fcs, rx_fchs->d_id);
+
+	rport->stats.adisc_rcvd++;
+
+	if (BFA_FCS_VPORT_IS_TARGET_MODE(port)) {
+		/*
+		 * @todo : Target Mode handling
+		 */
+		bfa_trc(port->fcs, rx_fchs->d_id);
+		bfa_assert(0);
+		return;
+	}
+
+	adisc = (struct fc_adisc_s *) (rx_fchs + 1);
+
+	/*
+	 * Accept if the itnim for this rport is online. Else reject the ADISC
+	 */
+	if (bfa_fcs_itnim_get_online_state(rport->itnim) == BFA_STATUS_OK) {
+
+		fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+		if (!fcxp)
+			return;
+
+		len = fc_adisc_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+					 rx_fchs->s_id,
+					 bfa_fcs_port_get_fcid(port),
+					 rx_fchs->ox_id, port->port_cfg.pwwn,
+					 port->port_cfg.nwwn);
+
+		bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag,
+			      BFA_FALSE, FC_CLASS_3, len, &fchs, NULL, NULL,
+			      FC_MAX_PDUSZ, 0);
+	} else {
+		rport->stats.adisc_rejected++;
+		bfa_fcs_rport_send_ls_rjt(rport, rx_fchs,
+					  FC_LS_RJT_RSN_UNABLE_TO_PERF_CMD,
+					  FC_LS_RJT_EXP_LOGIN_REQUIRED);
+	}
+
+}
+
+static void
+bfa_fcs_rport_hal_online(struct bfa_fcs_rport_s *rport)
+{
+	struct bfa_fcs_port_s *port = rport->port;
+	struct bfa_rport_info_s rport_info;
+
+	rport_info.pid = rport->pid;
+	rport_info.local_pid = port->pid;
+	rport_info.lp_tag = port->lp_tag;
+	rport_info.vf_id = port->fabric->vf_id;
+	rport_info.vf_en = port->fabric->is_vf;
+	rport_info.fc_class = rport->fc_cos;
+	rport_info.cisc = rport->cisc;
+	rport_info.max_frmsz = rport->maxfrsize;
+	bfa_rport_online(rport->bfa_rport, &rport_info);
+}
+
+static void
+bfa_fcs_rport_fc4_pause(struct bfa_fcs_rport_s *rport)
+{
+	if (bfa_fcs_port_is_initiator(rport->port))
+		bfa_fcs_itnim_pause(rport->itnim);
+
+	if (bfa_fcs_port_is_target(rport->port))
+		bfa_fcs_tin_pause(rport->tin);
+}
+
+static void
+bfa_fcs_rport_fc4_resume(struct bfa_fcs_rport_s *rport)
+{
+	if (bfa_fcs_port_is_initiator(rport->port))
+		bfa_fcs_itnim_resume(rport->itnim);
+
+	if (bfa_fcs_port_is_target(rport->port))
+		bfa_fcs_tin_resume(rport->tin);
+}
+
+static struct bfa_fcs_rport_s *
+bfa_fcs_rport_alloc(struct bfa_fcs_port_s *port, wwn_t pwwn, u32 rpid)
+{
+	struct bfa_fcs_s *fcs = port->fcs;
+	struct bfa_fcs_rport_s *rport;
+	struct bfad_rport_s *rport_drv;
+
+	/**
+	 * allocate rport
+	 */
+	if (bfa_fcb_rport_alloc(fcs->bfad, &rport, &rport_drv)
+	    != BFA_STATUS_OK) {
+		bfa_trc(fcs, rpid);
+		return NULL;
+	}
+
+	/*
+	 * Initialize r-port
+	 */
+	rport->port = port;
+	rport->fcs = fcs;
+	rport->rp_drv = rport_drv;
+	rport->pid = rpid;
+	rport->pwwn = pwwn;
+
+	/**
+	 * allocate BFA rport
+	 */
+	rport->bfa_rport = bfa_rport_create(port->fcs->bfa, rport);
+	if (!rport->bfa_rport) {
+		bfa_trc(fcs, rpid);
+		kfree(rport_drv);
+		return NULL;
+	}
+
+	/**
+	 * allocate FC-4s
+	 */
+	bfa_assert(bfa_fcs_port_is_initiator(port) ^
+		   bfa_fcs_port_is_target(port));
+
+	if (bfa_fcs_port_is_initiator(port)) {
+		rport->itnim = bfa_fcs_itnim_create(rport);
+		if (!rport->itnim) {
+			bfa_trc(fcs, rpid);
+			bfa_rport_delete(rport->bfa_rport);
+			kfree(rport_drv);
+			return NULL;
+		}
+	}
+
+	if (bfa_fcs_port_is_target(port)) {
+		rport->tin = bfa_fcs_tin_create(rport);
+		if (!rport->tin) {
+			bfa_trc(fcs, rpid);
+			bfa_rport_delete(rport->bfa_rport);
+			kfree(rport_drv);
+			return NULL;
+		}
+	}
+
+	bfa_fcs_port_add_rport(port, rport);
+
+	bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+
+	/*
+	 * Initialize the Rport Features(RPF) Sub Module
+	 */
+	if (!BFA_FCS_PID_IS_WKA(rport->pid))
+		bfa_fcs_rpf_init(rport);
+
+	return rport;
+}
+
+
+static void
+bfa_fcs_rport_free(struct bfa_fcs_rport_s *rport)
+{
+	struct bfa_fcs_port_s *port = rport->port;
+
+	/**
+	 * - delete FC-4s
+	 * - delete BFA rport
+	 * - remove from queue of rports
+	 */
+	if (bfa_fcs_port_is_initiator(port))
+		bfa_fcs_itnim_delete(rport->itnim);
+
+	if (bfa_fcs_port_is_target(port))
+		bfa_fcs_tin_delete(rport->tin);
+
+	bfa_rport_delete(rport->bfa_rport);
+	bfa_fcs_port_del_rport(port, rport);
+	kfree(rport->rp_drv);
+}
+
+static void
+bfa_fcs_rport_aen_post(struct bfa_fcs_rport_s *rport,
+		       enum bfa_rport_aen_event event,
+		       struct bfa_rport_aen_data_s *data)
+{
+	union bfa_aen_data_u aen_data;
+	struct bfa_log_mod_s *logmod = rport->fcs->logm;
+	wwn_t           lpwwn = bfa_fcs_port_get_pwwn(rport->port);
+	wwn_t           rpwwn = rport->pwwn;
+	char            lpwwn_ptr[BFA_STRING_32];
+	char            rpwwn_ptr[BFA_STRING_32];
+	char           *prio_str[] = { "unknown", "high", "medium", "low" };
+
+	wwn2str(lpwwn_ptr, lpwwn);
+	wwn2str(rpwwn_ptr, rpwwn);
+
+	switch (event) {
+	case BFA_RPORT_AEN_ONLINE:
+		bfa_log(logmod, BFA_AEN_RPORT_ONLINE, rpwwn_ptr, lpwwn_ptr);
+		break;
+	case BFA_RPORT_AEN_OFFLINE:
+		bfa_log(logmod, BFA_AEN_RPORT_OFFLINE, rpwwn_ptr, lpwwn_ptr);
+		break;
+	case BFA_RPORT_AEN_DISCONNECT:
+		bfa_log(logmod, BFA_AEN_RPORT_DISCONNECT, rpwwn_ptr, lpwwn_ptr);
+		break;
+	case BFA_RPORT_AEN_QOS_PRIO:
+		aen_data.rport.priv.qos = data->priv.qos;
+		bfa_log(logmod, BFA_AEN_RPORT_QOS_PRIO,
+			prio_str[aen_data.rport.priv.qos.qos_priority],
+			rpwwn_ptr, lpwwn_ptr);
+		break;
+	case BFA_RPORT_AEN_QOS_FLOWID:
+		aen_data.rport.priv.qos = data->priv.qos;
+		bfa_log(logmod, BFA_AEN_RPORT_QOS_FLOWID,
+			aen_data.rport.priv.qos.qos_flow_id, rpwwn_ptr,
+			lpwwn_ptr);
+		break;
+	default:
+		break;
+	}
+
+	aen_data.rport.vf_id = rport->port->fabric->vf_id;
+	aen_data.rport.ppwwn =
+		bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(rport->fcs));
+	aen_data.rport.lpwwn = lpwwn;
+	aen_data.rport.rpwwn = rpwwn;
+}
+
+static void
+bfa_fcs_rport_online_action(struct bfa_fcs_rport_s *rport)
+{
+	struct bfa_fcs_port_s *port = rport->port;
+
+	rport->stats.onlines++;
+
+	if (bfa_fcs_port_is_initiator(port)) {
+		bfa_fcs_itnim_rport_online(rport->itnim);
+		if (!BFA_FCS_PID_IS_WKA(rport->pid))
+			bfa_fcs_rpf_rport_online(rport);
+	};
+
+	if (bfa_fcs_port_is_target(port))
+		bfa_fcs_tin_rport_online(rport->tin);
+
+	/*
+	 * Don't post events for well known addresses
+	 */
+	if (!BFA_FCS_PID_IS_WKA(rport->pid))
+		bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_ONLINE, NULL);
+}
+
+static void
+bfa_fcs_rport_offline_action(struct bfa_fcs_rport_s *rport)
+{
+	struct bfa_fcs_port_s *port = rport->port;
+
+	rport->stats.offlines++;
+
+	/*
+	 * Don't post events for well known addresses
+	 */
+	if (!BFA_FCS_PID_IS_WKA(rport->pid)) {
+		if (bfa_fcs_port_is_online(rport->port) == BFA_TRUE) {
+			bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_DISCONNECT,
+					       NULL);
+		} else {
+			bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_OFFLINE,
+					       NULL);
+		}
+	}
+
+	if (bfa_fcs_port_is_initiator(port)) {
+		bfa_fcs_itnim_rport_offline(rport->itnim);
+		if (!BFA_FCS_PID_IS_WKA(rport->pid))
+			bfa_fcs_rpf_rport_offline(rport);
+	}
+
+	if (bfa_fcs_port_is_target(port))
+		bfa_fcs_tin_rport_offline(rport->tin);
+}
+
+/**
+ * Update rport parameters from PLOGI or PLOGI accept.
+ */
+static void
+bfa_fcs_rport_update(struct bfa_fcs_rport_s *rport, struct fc_logi_s *plogi)
+{
+	struct bfa_fcs_port_s *port = rport->port;
+
+	/**
+	 * - port name
+	 * - node name
+	 */
+	rport->pwwn = plogi->port_name;
+	rport->nwwn = plogi->node_name;
+
+	/**
+	 * - class of service
+	 */
+	rport->fc_cos = 0;
+	if (plogi->class3.class_valid)
+		rport->fc_cos = FC_CLASS_3;
+
+	if (plogi->class2.class_valid)
+		rport->fc_cos |= FC_CLASS_2;
+
+	/**
+	 * - CISC
+	 * - MAX receive frame size
+	 */
+	rport->cisc = plogi->csp.cisc;
+	rport->maxfrsize = bfa_os_ntohs(plogi->class3.rxsz);
+
+	bfa_trc(port->fcs, bfa_os_ntohs(plogi->csp.bbcred));
+	bfa_trc(port->fcs, port->fabric->bb_credit);
+	/**
+	 * Direct Attach P2P mode :
+	 * This is to handle a bug (233476) in IBM targets in Direct Attach
+	 * Mode. Basically, in FLOGI Accept the target would have erroneously
+	 * set the BB Credit to the value used in the FLOGI sent by the HBA.
+	 * It uses the correct value (its own BB credit) in PLOGI.
+	 */
+	if ((!bfa_fcs_fabric_is_switched(port->fabric))
+	    && (bfa_os_ntohs(plogi->csp.bbcred) < port->fabric->bb_credit)) {
+
+		bfa_trc(port->fcs, bfa_os_ntohs(plogi->csp.bbcred));
+		bfa_trc(port->fcs, port->fabric->bb_credit);
+
+		port->fabric->bb_credit = bfa_os_ntohs(plogi->csp.bbcred);
+		bfa_pport_set_tx_bbcredit(port->fcs->bfa,
+					  port->fabric->bb_credit);
+	}
+
+}
+
+/**
+ *   Called to handle LOGO received from an existing remote port.
+ */
+static void
+bfa_fcs_rport_process_logo(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs)
+{
+	rport->reply_oxid = fchs->ox_id;
+	bfa_trc(rport->fcs, rport->reply_oxid);
+
+	rport->stats.logo_rcvd++;
+	bfa_sm_send_event(rport, RPSM_EVENT_LOGO_RCVD);
+}
+
+
+
+/**
+ *  fcs_rport_public FCS rport public interfaces
+ */
+
+/**
+ * 	Called by bport/vport to create a remote port instance for a discovered
+ * 	remote device.
+ *
+ * @param[in] port	- base port or vport
+ * @param[in] rpid	- remote port ID
+ *
+ * @return None
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_rport_create(struct bfa_fcs_port_s *port, u32 rpid)
+{
+	struct bfa_fcs_rport_s *rport;
+
+	bfa_trc(port->fcs, rpid);
+	rport = bfa_fcs_rport_alloc(port, WWN_NULL, rpid);
+	if (!rport)
+		return NULL;
+
+	bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_SEND);
+	return rport;
+}
+
+/**
+ * Called to create a rport for which only the wwn is known.
+ *
+ * @param[in] port	- base port
+ * @param[in] rpwwn	- remote port wwn
+ *
+ * @return None
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_rport_create_by_wwn(struct bfa_fcs_port_s *port, wwn_t rpwwn)
+{
+	struct bfa_fcs_rport_s *rport;
+
+	bfa_trc(port->fcs, rpwwn);
+	rport = bfa_fcs_rport_alloc(port, rpwwn, 0);
+	if (!rport)
+		return NULL;
+
+	bfa_sm_send_event(rport, RPSM_EVENT_ADDRESS_DISC);
+	return rport;
+}
+
+/**
+ * Called by bport in private loop topology to indicate that a
+ * rport has been discovered and plogi has been completed.
+ *
+ * @param[in] port	- base port or vport
+ * @param[in] rpid	- remote port ID
+ */
+void
+bfa_fcs_rport_start(struct bfa_fcs_port_s *port, struct fchs_s *fchs,
+			struct fc_logi_s *plogi)
+{
+	struct bfa_fcs_rport_s *rport;
+
+	rport = bfa_fcs_rport_alloc(port, WWN_NULL, fchs->s_id);
+	if (!rport)
+		return;
+
+	bfa_fcs_rport_update(rport, plogi);
+
+	bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_COMP);
+}
+
+/**
+ *   Called by bport/vport to handle PLOGI received from a new remote port.
+ *   If an existing rport does a plogi, it will be handled separately.
+ */
+void
+bfa_fcs_rport_plogi_create(struct bfa_fcs_port_s *port, struct fchs_s *fchs,
+			   struct fc_logi_s *plogi)
+{
+	struct bfa_fcs_rport_s *rport;
+
+	rport = bfa_fcs_rport_alloc(port, plogi->port_name, fchs->s_id);
+	if (!rport)
+		return;
+
+	bfa_fcs_rport_update(rport, plogi);
+
+	rport->reply_oxid = fchs->ox_id;
+	bfa_trc(rport->fcs, rport->reply_oxid);
+
+	rport->stats.plogi_rcvd++;
+	bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_RCVD);
+}
+
+static int
+wwn_compare(wwn_t wwn1, wwn_t wwn2)
+{
+	u8        *b1 = (u8 *) &wwn1;
+	u8        *b2 = (u8 *) &wwn2;
+	int             i;
+
+	for (i = 0; i < sizeof(wwn_t); i++) {
+		if (b1[i] < b2[i])
+			return -1;
+		if (b1[i] > b2[i])
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ *   Called by bport/vport to handle PLOGI received from an existing
+ * 	 remote port.
+ */
+void
+bfa_fcs_rport_plogi(struct bfa_fcs_rport_s *rport, struct fchs_s *rx_fchs,
+		    struct fc_logi_s *plogi)
+{
+	/**
+	 * @todo Handle P2P and initiator-initiator.
+	 */
+
+	bfa_fcs_rport_update(rport, plogi);
+
+	rport->reply_oxid = rx_fchs->ox_id;
+	bfa_trc(rport->fcs, rport->reply_oxid);
+
+	/**
+	 * In Switched fabric topology,
+	 * PLOGI to each other. If our pwwn is smaller, ignore it,
+	 * if it is not a well known address.
+	 * If the link topology is N2N,
+	 * this Plogi should be accepted.
+	 */
+	if ((wwn_compare(rport->port->port_cfg.pwwn, rport->pwwn) == -1)
+	    && (bfa_fcs_fabric_is_switched(rport->port->fabric))
+	    && (!BFA_FCS_PID_IS_WKA(rport->pid))) {
+		bfa_trc(rport->fcs, rport->pid);
+		return;
+	}
+
+	rport->stats.plogi_rcvd++;
+	bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_RCVD);
+}
+
+/**
+ * Called by bport/vport to delete a remote port instance.
+ *
+* Rport delete is called under the following conditions:
+ * 		- vport is deleted
+ * 		- vf is deleted
+ * 		- explicit request from OS to delete rport (vmware)
+ */
+void
+bfa_fcs_rport_delete(struct bfa_fcs_rport_s *rport)
+{
+	bfa_sm_send_event(rport, RPSM_EVENT_DELETE);
+}
+
+/**
+ * Called by bport/vport to  when a target goes offline.
+ *
+ */
+void
+bfa_fcs_rport_offline(struct bfa_fcs_rport_s *rport)
+{
+	bfa_sm_send_event(rport, RPSM_EVENT_LOGO_IMP);
+}
+
+/**
+ * Called by bport in n2n when a target (attached port) becomes online.
+ *
+ */
+void
+bfa_fcs_rport_online(struct bfa_fcs_rport_s *rport)
+{
+	bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_SEND);
+}
+
+/**
+ *   Called by bport/vport to notify SCN for the remote port
+ */
+void
+bfa_fcs_rport_scn(struct bfa_fcs_rport_s *rport)
+{
+
+	rport->stats.rscns++;
+	bfa_sm_send_event(rport, RPSM_EVENT_SCN);
+}
+
+/**
+ *   Called by  fcpim to notify that the ITN cleanup is done.
+ */
+void
+bfa_fcs_rport_itnim_ack(struct bfa_fcs_rport_s *rport)
+{
+	bfa_sm_send_event(rport, RPSM_EVENT_FC4_OFFLINE);
+}
+
+/**
+ *   Called by fcptm to notify that the ITN cleanup is done.
+ */
+void
+bfa_fcs_rport_tin_ack(struct bfa_fcs_rport_s *rport)
+{
+	bfa_sm_send_event(rport, RPSM_EVENT_FC4_OFFLINE);
+}
+
+/**
+ *     This routine BFA callback for bfa_rport_online() call.
+ *
+ * 	param[in] 	cb_arg	-  rport struct.
+ *
+ * 	return
+ * 		void
+ *
+* 	Special Considerations:
+ *
+ * 	note
+ */
+void
+bfa_cb_rport_online(void *cbarg)
+{
+
+	struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_sm_send_event(rport, RPSM_EVENT_HCB_ONLINE);
+}
+
+/**
+ *     This routine BFA callback for bfa_rport_offline() call.
+ *
+ * 	param[in] 	rport 	-
+ *
+ * 	return
+ * 		void
+ *
+ * 	Special Considerations:
+ *
+ * 	note
+ */
+void
+bfa_cb_rport_offline(void *cbarg)
+{
+	struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_sm_send_event(rport, RPSM_EVENT_HCB_OFFLINE);
+}
+
+/**
+ * This routine is a static BFA callback when there is a QoS flow_id
+ * change notification
+ *
+ * @param[in] 	rport 	-
+ *
+ * @return  	void
+ *
+ * Special Considerations:
+ *
+ * @note
+ */
+void
+bfa_cb_rport_qos_scn_flowid(void *cbarg,
+			    struct bfa_rport_qos_attr_s old_qos_attr,
+			    struct bfa_rport_qos_attr_s new_qos_attr)
+{
+	struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+	struct bfa_rport_aen_data_s aen_data;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+	aen_data.priv.qos = new_qos_attr;
+	bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_QOS_FLOWID, &aen_data);
+}
+
+/**
+ * This routine is a static BFA callback when there is a QoS priority
+ * change notification
+ *
+ * @param[in] 	rport 	-
+ *
+ * @return 	void
+ *
+ * Special Considerations:
+ *
+ * @note
+ */
+void
+bfa_cb_rport_qos_scn_prio(void *cbarg, struct bfa_rport_qos_attr_s old_qos_attr,
+			  struct bfa_rport_qos_attr_s new_qos_attr)
+{
+	struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+	struct bfa_rport_aen_data_s aen_data;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+	aen_data.priv.qos = new_qos_attr;
+	bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_QOS_PRIO, &aen_data);
+}
+
+/**
+ * 		Called to process any unsolicted frames from this remote port
+ */
+void
+bfa_fcs_rport_logo_imp(struct bfa_fcs_rport_s *rport)
+{
+	bfa_sm_send_event(rport, RPSM_EVENT_LOGO_IMP);
+}
+
+/**
+ * 		Called to process any unsolicted frames from this remote port
+ */
+void
+bfa_fcs_rport_uf_recv(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs,
+			u16 len)
+{
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fc_els_cmd_s   *els_cmd;
+
+	bfa_trc(rport->fcs, fchs->s_id);
+	bfa_trc(rport->fcs, fchs->d_id);
+	bfa_trc(rport->fcs, fchs->type);
+
+	if (fchs->type != FC_TYPE_ELS)
+		return;
+
+	els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+	bfa_trc(rport->fcs, els_cmd->els_code);
+
+	switch (els_cmd->els_code) {
+	case FC_ELS_LOGO:
+		bfa_fcs_rport_process_logo(rport, fchs);
+		break;
+
+	case FC_ELS_ADISC:
+		bfa_fcs_rport_process_adisc(rport, fchs, len);
+		break;
+
+	case FC_ELS_PRLO:
+		if (bfa_fcs_port_is_initiator(port))
+			bfa_fcs_fcpim_uf_recv(rport->itnim, fchs, len);
+
+		if (bfa_fcs_port_is_target(port))
+			bfa_fcs_fcptm_uf_recv(rport->tin, fchs, len);
+		break;
+
+	case FC_ELS_PRLI:
+		bfa_fcs_rport_process_prli(rport, fchs, len);
+		break;
+
+	case FC_ELS_RPSC:
+		bfa_fcs_rport_process_rpsc(rport, fchs, len);
+		break;
+
+	default:
+		bfa_fcs_rport_send_ls_rjt(rport, fchs,
+					  FC_LS_RJT_RSN_CMD_NOT_SUPP,
+					  FC_LS_RJT_EXP_NO_ADDL_INFO);
+		break;
+	}
+}
+
+/*
+ * Send a LS reject
+ */
+static void
+bfa_fcs_rport_send_ls_rjt(struct bfa_fcs_rport_s *rport, struct fchs_s *rx_fchs,
+			  u8 reason_code, u8 reason_code_expl)
+{
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	int             len;
+
+	bfa_trc(rport->fcs, rx_fchs->s_id);
+
+	fcxp = bfa_fcs_fcxp_alloc(rport->fcs);
+	if (!fcxp)
+		return;
+
+	len = fc_ls_rjt_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+			      bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+			      reason_code, reason_code_expl);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+}
+
+/**
+ *   Module initialization
+ */
+void
+bfa_fcs_rport_modinit(struct bfa_fcs_s *fcs)
+{
+}
+
+/**
+ *   Module cleanup
+ */
+void
+bfa_fcs_rport_modexit(struct bfa_fcs_s *fcs)
+{
+	bfa_fcs_modexit_comp(fcs);
+}
+
+/**
+ * Return state of rport.
+ */
+int
+bfa_fcs_rport_get_state(struct bfa_fcs_rport_s *rport)
+{
+	return bfa_sm_to_state(rport_sm_table, rport->sm);
+}
+
+/**
+ * 		 Called by the Driver to set rport delete/ageout timeout
+ *
+ * 	param[in]		rport timeout value in seconds.
+ *
+ * 	return None
+ */
+void
+bfa_fcs_rport_set_del_timeout(u8 rport_tmo)
+{
+	/*
+	 * convert to Millisecs
+	 */
+	if (rport_tmo > 0)
+		bfa_fcs_rport_del_timeout = rport_tmo * 1000;
+}
diff --git a/drivers/scsi/bfa/rport_api.c b/drivers/scsi/bfa/rport_api.c
new file mode 100644
index 000000000000..3dae1774181e
--- /dev/null
+++ b/drivers/scsi/bfa/rport_api.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_vport.h"
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+
+BFA_TRC_FILE(FCS, RPORT_API);
+
+/**
+ *  rport_api.c Remote port implementation.
+ */
+
+/**
+ *  fcs_rport_api FCS rport API.
+ */
+
+/**
+ * 	Direct API to add a target by port wwn. This interface is used, for
+ *	example, by bios when target pwwn is known from boot lun configuration.
+ */
+bfa_status_t
+bfa_fcs_rport_add(struct bfa_fcs_port_s *port, wwn_t *pwwn,
+			struct bfa_fcs_rport_s *rport,
+			struct bfad_rport_s *rport_drv)
+{
+	bfa_trc(port->fcs, *pwwn);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ *	Direct API to remove a target and its associated resources. This
+ *	interface is used, for example, by vmware driver to remove target
+ *	ports from the target list for a VM.
+ */
+bfa_status_t
+bfa_fcs_rport_remove(struct bfa_fcs_rport_s *rport_in)
+{
+
+	struct bfa_fcs_rport_s *rport;
+
+	bfa_trc(rport_in->fcs, rport_in->pwwn);
+
+	rport = bfa_fcs_port_get_rport_by_pwwn(rport_in->port, rport_in->pwwn);
+	if (rport == NULL) {
+		/*
+		 * TBD Error handling
+		 */
+		bfa_trc(rport_in->fcs, rport_in->pid);
+		return BFA_STATUS_UNKNOWN_RWWN;
+	}
+
+	/*
+	 * TBD if this remote port is online, send a logo
+	 */
+	return BFA_STATUS_OK;
+
+}
+
+/**
+ *	Remote device status for display/debug.
+ */
+void
+bfa_fcs_rport_get_attr(struct bfa_fcs_rport_s *rport,
+			struct bfa_rport_attr_s *rport_attr)
+{
+	struct bfa_rport_qos_attr_s qos_attr;
+	struct bfa_fcs_port_s *port = rport->port;
+
+	bfa_os_memset(rport_attr, 0, sizeof(struct bfa_rport_attr_s));
+
+	rport_attr->pid = rport->pid;
+	rport_attr->pwwn = rport->pwwn;
+	rport_attr->nwwn = rport->nwwn;
+	rport_attr->cos_supported = rport->fc_cos;
+	rport_attr->df_sz = rport->maxfrsize;
+	rport_attr->state = bfa_fcs_rport_get_state(rport);
+	rport_attr->fc_cos = rport->fc_cos;
+	rport_attr->cisc = rport->cisc;
+	rport_attr->scsi_function = rport->scsi_function;
+	rport_attr->curr_speed  = rport->rpf.rpsc_speed;
+	rport_attr->assigned_speed  = rport->rpf.assigned_speed;
+
+	bfa_rport_get_qos_attr(rport->bfa_rport, &qos_attr);
+	rport_attr->qos_attr = qos_attr;
+
+	rport_attr->trl_enforced = BFA_FALSE;
+	if (bfa_pport_is_ratelim(port->fcs->bfa)) {
+		if ((rport->rpf.rpsc_speed == BFA_PPORT_SPEED_UNKNOWN) ||
+			(rport->rpf.rpsc_speed <
+			bfa_fcs_port_get_rport_max_speed(port)))
+			rport_attr->trl_enforced = BFA_TRUE;
+	}
+
+	/*
+	 * TODO
+	 * rport->symname
+	 */
+}
+
+/**
+ * 	Per remote device statistics.
+ */
+void
+bfa_fcs_rport_get_stats(struct bfa_fcs_rport_s *rport,
+			struct bfa_rport_stats_s *stats)
+{
+	*stats = rport->stats;
+}
+
+void
+bfa_fcs_rport_clear_stats(struct bfa_fcs_rport_s *rport)
+{
+	bfa_os_memset((char *)&rport->stats, 0,
+			sizeof(struct bfa_rport_stats_s));
+}
+
+struct bfa_fcs_rport_s *
+bfa_fcs_rport_lookup(struct bfa_fcs_port_s *port, wwn_t rpwwn)
+{
+	struct bfa_fcs_rport_s *rport;
+
+	rport = bfa_fcs_port_get_rport_by_pwwn(port, rpwwn);
+	if (rport == NULL) {
+		/*
+		 * TBD Error handling
+		 */
+	}
+
+	return rport;
+}
+
+struct bfa_fcs_rport_s *
+bfa_fcs_rport_lookup_by_nwwn(struct bfa_fcs_port_s *port, wwn_t rnwwn)
+{
+	struct bfa_fcs_rport_s *rport;
+
+	rport = bfa_fcs_port_get_rport_by_nwwn(port, rnwwn);
+	if (rport == NULL) {
+		/*
+		 * TBD Error handling
+		 */
+	}
+
+	return rport;
+}
+
+/*
+ * This API is to set the Rport's speed. Should be used when RPSC is not
+ * supported by the rport.
+ */
+void
+bfa_fcs_rport_set_speed(struct bfa_fcs_rport_s *rport,
+			enum bfa_pport_speed speed)
+{
+	rport->rpf.assigned_speed  = speed;
+
+	/* Set this speed in f/w only if the RPSC speed is not available */
+	if (rport->rpf.rpsc_speed == BFA_PPORT_SPEED_UNKNOWN)
+		bfa_rport_speed(rport->bfa_rport, speed);
+}
+
+
diff --git a/drivers/scsi/bfa/rport_ftrs.c b/drivers/scsi/bfa/rport_ftrs.c
new file mode 100644
index 000000000000..8a1f59d596c1
--- /dev/null
+++ b/drivers/scsi/bfa/rport_ftrs.c
@@ -0,0 +1,375 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  rport_ftrs.c Remote port features (RPF) implementation.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcbuild.h"
+#include "fcs_rport.h"
+#include "fcs_lport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+
+BFA_TRC_FILE(FCS, RPORT_FTRS);
+
+#define BFA_FCS_RPF_RETRIES	(3)
+#define BFA_FCS_RPF_RETRY_TIMEOUT  (1000) /* 1 sec (In millisecs) */
+
+static void     bfa_fcs_rpf_send_rpsc2(void *rport_cbarg,
+			struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_rpf_rpsc2_response(void *fcsarg,
+			struct bfa_fcxp_s *fcxp, void *cbarg,
+			bfa_status_t req_status, u32 rsp_len,
+			u32 resid_len,
+			struct fchs_s *rsp_fchs);
+static void     bfa_fcs_rpf_timeout(void *arg);
+
+/**
+ *  fcs_rport_ftrs_sm FCS rport state machine events
+ */
+
+enum rpf_event {
+	RPFSM_EVENT_RPORT_OFFLINE  = 1,     /*  Rport offline            */
+	RPFSM_EVENT_RPORT_ONLINE   = 2,     /*  Rport online            */
+	RPFSM_EVENT_FCXP_SENT      = 3,    /*  Frame from has been sent */
+	RPFSM_EVENT_TIMEOUT  	   = 4,    /*  Rport SM timeout event   */
+	RPFSM_EVENT_RPSC_COMP      = 5,
+	RPFSM_EVENT_RPSC_FAIL      = 6,
+	RPFSM_EVENT_RPSC_ERROR     = 7,
+};
+
+static void	bfa_fcs_rpf_sm_uninit(struct bfa_fcs_rpf_s *rpf,
+					enum rpf_event event);
+static void     bfa_fcs_rpf_sm_rpsc_sending(struct bfa_fcs_rpf_s *rpf,
+					       enum rpf_event event);
+static void     bfa_fcs_rpf_sm_rpsc(struct bfa_fcs_rpf_s *rpf,
+					       enum rpf_event event);
+static void 	bfa_fcs_rpf_sm_rpsc_retry(struct bfa_fcs_rpf_s *rpf,
+							enum rpf_event event);
+static void     bfa_fcs_rpf_sm_offline(struct bfa_fcs_rpf_s *rpf,
+							enum rpf_event event);
+static void     bfa_fcs_rpf_sm_online(struct bfa_fcs_rpf_s *rpf,
+							enum rpf_event event);
+
+static void
+bfa_fcs_rpf_sm_uninit(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+	struct bfa_fcs_rport_s *rport = rpf->rport;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPFSM_EVENT_RPORT_ONLINE :
+		if (!BFA_FCS_PID_IS_WKA(rport->pid)) {
+			bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
+			rpf->rpsc_retries = 0;
+			bfa_fcs_rpf_send_rpsc2(rpf, NULL);
+			break;
+		};
+
+	case RPFSM_EVENT_RPORT_OFFLINE :
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_rpf_sm_rpsc_sending(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+	struct bfa_fcs_rport_s *rport = rpf->rport;
+
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPFSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc);
+		break;
+
+	case RPFSM_EVENT_RPORT_OFFLINE :
+		bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rpf->fcxp_wqe);
+		rpf->rpsc_retries = 0;
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_rpf_sm_rpsc(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+	struct bfa_fcs_rport_s *rport = rpf->rport;
+
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPFSM_EVENT_RPSC_COMP:
+		bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_online);
+		/* Update speed info in f/w via BFA */
+		if (rpf->rpsc_speed != BFA_PPORT_SPEED_UNKNOWN) {
+			bfa_rport_speed(rport->bfa_rport, rpf->rpsc_speed);
+		} else if (rpf->assigned_speed != BFA_PPORT_SPEED_UNKNOWN) {
+			bfa_rport_speed(rport->bfa_rport, rpf->assigned_speed);
+		}
+		break;
+
+	case RPFSM_EVENT_RPSC_FAIL:
+		/* RPSC not supported by rport */
+		bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_online);
+		break;
+
+	case RPFSM_EVENT_RPSC_ERROR:
+		/* need to retry...delayed a bit. */
+		if (rpf->rpsc_retries++ < BFA_FCS_RPF_RETRIES) {
+			bfa_timer_start(rport->fcs->bfa, &rpf->timer,
+				    bfa_fcs_rpf_timeout, rpf,
+				    BFA_FCS_RPF_RETRY_TIMEOUT);
+			bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_retry);
+		} else {
+			bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_online);
+		}
+		break;
+
+	case RPFSM_EVENT_RPORT_OFFLINE :
+		bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
+		bfa_fcxp_discard(rpf->fcxp);
+		rpf->rpsc_retries = 0;
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_rpf_sm_rpsc_retry(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+	struct bfa_fcs_rport_s *rport = rpf->rport;
+
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPFSM_EVENT_TIMEOUT :
+		/* re-send the RPSC */
+		bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
+		bfa_fcs_rpf_send_rpsc2(rpf, NULL);
+		break;
+
+	case RPFSM_EVENT_RPORT_OFFLINE :
+		bfa_timer_stop(&rpf->timer);
+		bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
+		rpf->rpsc_retries = 0;
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_rpf_sm_online(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+	struct bfa_fcs_rport_s *rport = rpf->rport;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPFSM_EVENT_RPORT_OFFLINE :
+		bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
+		rpf->rpsc_retries = 0;
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_rpf_sm_offline(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+	struct bfa_fcs_rport_s *rport = rpf->rport;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPFSM_EVENT_RPORT_ONLINE :
+		bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
+		bfa_fcs_rpf_send_rpsc2(rpf, NULL);
+		break;
+
+	case RPFSM_EVENT_RPORT_OFFLINE :
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+/**
+ * Called when Rport is created.
+ */
+void  bfa_fcs_rpf_init(struct bfa_fcs_rport_s *rport)
+{
+	struct bfa_fcs_rpf_s *rpf = &rport->rpf;
+
+	bfa_trc(rport->fcs, rport->pid);
+	rpf->rport = rport;
+
+	bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_uninit);
+}
+
+/**
+ * Called when Rport becomes online
+ */
+void  bfa_fcs_rpf_rport_online(struct bfa_fcs_rport_s *rport)
+{
+	bfa_trc(rport->fcs, rport->pid);
+
+	if (__fcs_min_cfg(rport->port->fcs))
+		return;
+
+	if (bfa_fcs_fabric_is_switched(rport->port->fabric))
+		bfa_sm_send_event(&rport->rpf, RPFSM_EVENT_RPORT_ONLINE);
+}
+
+/**
+ * Called when Rport becomes offline
+ */
+void  bfa_fcs_rpf_rport_offline(struct bfa_fcs_rport_s *rport)
+{
+	bfa_trc(rport->fcs, rport->pid);
+
+	if (__fcs_min_cfg(rport->port->fcs))
+		return;
+
+	bfa_sm_send_event(&rport->rpf, RPFSM_EVENT_RPORT_OFFLINE);
+}
+
+static void
+bfa_fcs_rpf_timeout(void *arg)
+{
+	struct bfa_fcs_rpf_s *rpf = (struct bfa_fcs_rpf_s *) arg;
+	struct bfa_fcs_rport_s *rport = rpf->rport;
+
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_sm_send_event(rpf, RPFSM_EVENT_TIMEOUT);
+}
+
+static void
+bfa_fcs_rpf_send_rpsc2(void *rpf_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_rpf_s *rpf 	= (struct bfa_fcs_rpf_s *)rpf_cbarg;
+	struct bfa_fcs_rport_s *rport = rpf->rport;
+	struct bfa_fcs_port_s *port = rport->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(rport->fcs, rport->pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &rpf->fcxp_wqe,
+					bfa_fcs_rpf_send_rpsc2, rpf);
+		return;
+	}
+	rpf->fcxp = fcxp;
+
+	len = fc_rpsc2_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+			    bfa_fcs_port_get_fcid(port), &rport->pid, 1);
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+			  FC_CLASS_3, len, &fchs, bfa_fcs_rpf_rpsc2_response,
+			  rpf, FC_MAX_PDUSZ, FC_RA_TOV);
+	rport->stats.rpsc_sent++;
+	bfa_sm_send_event(rpf, RPFSM_EVENT_FCXP_SENT);
+
+}
+
+static void
+bfa_fcs_rpf_rpsc2_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+			    bfa_status_t req_status, u32 rsp_len,
+			    u32 resid_len, struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_rpf_s *rpf = (struct bfa_fcs_rpf_s *) cbarg;
+	struct bfa_fcs_rport_s *rport = rpf->rport;
+	struct fc_ls_rjt_s    *ls_rjt;
+	struct fc_rpsc2_acc_s  *rpsc2_acc;
+	u16        num_ents;
+
+	bfa_trc(rport->fcs, req_status);
+
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(rport->fcs, req_status);
+		if (req_status == BFA_STATUS_ETIMER)
+			rport->stats.rpsc_failed++;
+		bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_ERROR);
+		return;
+	}
+
+	rpsc2_acc = (struct fc_rpsc2_acc_s *) BFA_FCXP_RSP_PLD(fcxp);
+	if (rpsc2_acc->els_cmd == FC_ELS_ACC) {
+		rport->stats.rpsc_accs++;
+		num_ents = bfa_os_ntohs(rpsc2_acc->num_pids);
+		bfa_trc(rport->fcs, num_ents);
+		if (num_ents > 0) {
+			bfa_assert(rpsc2_acc->port_info[0].pid != rport->pid);
+			bfa_trc(rport->fcs,
+				bfa_os_ntohs(rpsc2_acc->port_info[0].pid));
+			bfa_trc(rport->fcs,
+				bfa_os_ntohs(rpsc2_acc->port_info[0].speed));
+			bfa_trc(rport->fcs,
+				bfa_os_ntohs(rpsc2_acc->port_info[0].index));
+			bfa_trc(rport->fcs,
+				rpsc2_acc->port_info[0].type);
+
+			if (rpsc2_acc->port_info[0].speed == 0) {
+				bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_ERROR);
+				return;
+			}
+
+			rpf->rpsc_speed = fc_rpsc_operspeed_to_bfa_speed(
+				bfa_os_ntohs(rpsc2_acc->port_info[0].speed));
+
+			bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_COMP);
+		}
+	} else {
+		ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+		bfa_trc(rport->fcs, ls_rjt->reason_code);
+		bfa_trc(rport->fcs, ls_rjt->reason_code_expl);
+		rport->stats.rpsc_rejects++;
+		if (ls_rjt->reason_code == FC_LS_RJT_RSN_CMD_NOT_SUPP) {
+			bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_FAIL);
+		} else {
+			bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_ERROR);
+		}
+	}
+}
diff --git a/drivers/scsi/bfa/scn.c b/drivers/scsi/bfa/scn.c
new file mode 100644
index 000000000000..bd4771ff62c8
--- /dev/null
+++ b/drivers/scsi/bfa/scn.c
@@ -0,0 +1,482 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_ms.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, SCN);
+
+#define FC_QOS_RSCN_EVENT		0x0c
+#define FC_FABRIC_NAME_RSCN_EVENT	0x0d
+
+/*
+ * forward declarations
+ */
+static void     bfa_fcs_port_scn_send_scr(void *scn_cbarg,
+					  struct bfa_fcxp_s *fcxp_alloced);
+static void     bfa_fcs_port_scn_scr_response(void *fcsarg,
+					      struct bfa_fcxp_s *fcxp,
+					      void *cbarg,
+					      bfa_status_t req_status,
+					      u32 rsp_len,
+					      u32 resid_len,
+					      struct fchs_s *rsp_fchs);
+static void     bfa_fcs_port_scn_send_ls_acc(struct bfa_fcs_port_s *port,
+					     struct fchs_s *rx_fchs);
+static void     bfa_fcs_port_scn_timeout(void *arg);
+
+/**
+ *  fcs_scm_sm FCS SCN state machine
+ */
+
+/**
+ * VPort SCN State Machine events
+ */
+enum port_scn_event {
+	SCNSM_EVENT_PORT_ONLINE = 1,
+	SCNSM_EVENT_PORT_OFFLINE = 2,
+	SCNSM_EVENT_RSP_OK = 3,
+	SCNSM_EVENT_RSP_ERROR = 4,
+	SCNSM_EVENT_TIMEOUT = 5,
+	SCNSM_EVENT_SCR_SENT = 6,
+};
+
+static void     bfa_fcs_port_scn_sm_offline(struct bfa_fcs_port_scn_s *scn,
+					    enum port_scn_event event);
+static void     bfa_fcs_port_scn_sm_sending_scr(struct bfa_fcs_port_scn_s *scn,
+						enum port_scn_event event);
+static void     bfa_fcs_port_scn_sm_scr(struct bfa_fcs_port_scn_s *scn,
+					enum port_scn_event event);
+static void     bfa_fcs_port_scn_sm_scr_retry(struct bfa_fcs_port_scn_s *scn,
+					      enum port_scn_event event);
+static void     bfa_fcs_port_scn_sm_online(struct bfa_fcs_port_scn_s *scn,
+					   enum port_scn_event event);
+
+/**
+ * 		Starting state - awaiting link up.
+ */
+static void
+bfa_fcs_port_scn_sm_offline(struct bfa_fcs_port_scn_s *scn,
+			    enum port_scn_event event)
+{
+	switch (event) {
+	case SCNSM_EVENT_PORT_ONLINE:
+		bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_sending_scr);
+		bfa_fcs_port_scn_send_scr(scn, NULL);
+		break;
+
+	case SCNSM_EVENT_PORT_OFFLINE:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_scn_sm_sending_scr(struct bfa_fcs_port_scn_s *scn,
+				enum port_scn_event event)
+{
+	switch (event) {
+	case SCNSM_EVENT_SCR_SENT:
+		bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_scr);
+		break;
+
+	case SCNSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+		bfa_fcxp_walloc_cancel(scn->port->fcs->bfa, &scn->fcxp_wqe);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_scn_sm_scr(struct bfa_fcs_port_scn_s *scn,
+			enum port_scn_event event)
+{
+	struct bfa_fcs_port_s *port = scn->port;
+
+	switch (event) {
+	case SCNSM_EVENT_RSP_OK:
+		bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_online);
+		break;
+
+	case SCNSM_EVENT_RSP_ERROR:
+		bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_scr_retry);
+		bfa_timer_start(port->fcs->bfa, &scn->timer,
+				bfa_fcs_port_scn_timeout, scn,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case SCNSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+		bfa_fcxp_discard(scn->fcxp);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_scn_sm_scr_retry(struct bfa_fcs_port_scn_s *scn,
+			      enum port_scn_event event)
+{
+	switch (event) {
+	case SCNSM_EVENT_TIMEOUT:
+		bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_sending_scr);
+		bfa_fcs_port_scn_send_scr(scn, NULL);
+		break;
+
+	case SCNSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+		bfa_timer_stop(&scn->timer);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcs_port_scn_sm_online(struct bfa_fcs_port_scn_s *scn,
+			   enum port_scn_event event)
+{
+	switch (event) {
+	case SCNSM_EVENT_PORT_OFFLINE:
+		bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  fcs_scn_private FCS SCN private functions
+ */
+
+/**
+ * This routine will be called to send a SCR command.
+ */
+static void
+bfa_fcs_port_scn_send_scr(void *scn_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+	struct bfa_fcs_port_scn_s *scn = scn_cbarg;
+	struct bfa_fcs_port_s *port = scn->port;
+	struct fchs_s          fchs;
+	int             len;
+	struct bfa_fcxp_s *fcxp;
+
+	bfa_trc(port->fcs, port->pid);
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp) {
+		bfa_fcxp_alloc_wait(port->fcs->bfa, &scn->fcxp_wqe,
+				    bfa_fcs_port_scn_send_scr, scn);
+		return;
+	}
+	scn->fcxp = fcxp;
+
+	/*
+	 * Handle VU registrations for Base port only
+	 */
+	if ((!port->vport) && bfa_ioc_get_fcmode(&port->fcs->bfa->ioc)) {
+		len = fc_scr_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+				   bfa_lps_is_brcd_fabric(port->fabric->lps),
+				   port->pid, 0);
+	} else {
+		len = fc_scr_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), BFA_FALSE,
+				   port->pid, 0);
+	}
+
+	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+		      FC_CLASS_3, len, &fchs, bfa_fcs_port_scn_scr_response,
+		      (void *)scn, FC_MAX_PDUSZ, FC_RA_TOV);
+
+	bfa_sm_send_event(scn, SCNSM_EVENT_SCR_SENT);
+}
+
+static void
+bfa_fcs_port_scn_scr_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+			      void *cbarg, bfa_status_t req_status,
+			      u32 rsp_len, u32 resid_len,
+			      struct fchs_s *rsp_fchs)
+{
+	struct bfa_fcs_port_scn_s *scn = (struct bfa_fcs_port_scn_s *)cbarg;
+	struct bfa_fcs_port_s *port = scn->port;
+	struct fc_els_cmd_s   *els_cmd;
+	struct fc_ls_rjt_s    *ls_rjt;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+	/*
+	 * Sanity Checks
+	 */
+	if (req_status != BFA_STATUS_OK) {
+		bfa_trc(port->fcs, req_status);
+		bfa_sm_send_event(scn, SCNSM_EVENT_RSP_ERROR);
+		return;
+	}
+
+	els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+	switch (els_cmd->els_code) {
+
+	case FC_ELS_ACC:
+		bfa_sm_send_event(scn, SCNSM_EVENT_RSP_OK);
+		break;
+
+	case FC_ELS_LS_RJT:
+
+		ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+		bfa_trc(port->fcs, ls_rjt->reason_code);
+		bfa_trc(port->fcs, ls_rjt->reason_code_expl);
+
+		bfa_sm_send_event(scn, SCNSM_EVENT_RSP_ERROR);
+		break;
+
+	default:
+		bfa_sm_send_event(scn, SCNSM_EVENT_RSP_ERROR);
+	}
+}
+
+/*
+ * Send a LS Accept
+ */
+static void
+bfa_fcs_port_scn_send_ls_acc(struct bfa_fcs_port_s *port,
+			struct fchs_s *rx_fchs)
+{
+	struct fchs_s          fchs;
+	struct bfa_fcxp_s *fcxp;
+	struct bfa_rport_s *bfa_rport = NULL;
+	int             len;
+
+	bfa_trc(port->fcs, rx_fchs->s_id);
+
+	fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+	if (!fcxp)
+		return;
+
+	len = fc_ls_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+			      bfa_fcs_port_get_fcid(port), rx_fchs->ox_id);
+
+	bfa_fcxp_send(fcxp, bfa_rport, port->fabric->vf_id, port->lp_tag,
+		      BFA_FALSE, FC_CLASS_3, len, &fchs, NULL, NULL,
+		      FC_MAX_PDUSZ, 0);
+}
+
+/**
+ *     This routine will be called by bfa_timer on timer timeouts.
+ *
+ * 	param[in] 	vport 			- pointer to bfa_fcs_port_t.
+ * 	param[out]	vport_status 	- pointer to return vport status in
+ *
+ * 	return
+ * 		void
+ *
+*  	Special Considerations:
+ *
+ * 	note
+ */
+static void
+bfa_fcs_port_scn_timeout(void *arg)
+{
+	struct bfa_fcs_port_scn_s *scn = (struct bfa_fcs_port_scn_s *)arg;
+
+	bfa_sm_send_event(scn, SCNSM_EVENT_TIMEOUT);
+}
+
+
+
+/**
+ *  fcs_scn_public FCS state change notification public interfaces
+ */
+
+/*
+ * Functions called by port/fab
+ */
+void
+bfa_fcs_port_scn_init(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_scn_s *scn = BFA_FCS_GET_SCN_FROM_PORT(port);
+
+	scn->port = port;
+	bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+}
+
+void
+bfa_fcs_port_scn_offline(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_scn_s *scn = BFA_FCS_GET_SCN_FROM_PORT(port);
+
+	scn->port = port;
+	bfa_sm_send_event(scn, SCNSM_EVENT_PORT_OFFLINE);
+}
+
+void
+bfa_fcs_port_scn_online(struct bfa_fcs_port_s *port)
+{
+	struct bfa_fcs_port_scn_s *scn = BFA_FCS_GET_SCN_FROM_PORT(port);
+
+	scn->port = port;
+	bfa_sm_send_event(scn, SCNSM_EVENT_PORT_ONLINE);
+}
+
+static void
+bfa_fcs_port_scn_portid_rscn(struct bfa_fcs_port_s *port, u32 rpid)
+{
+	struct bfa_fcs_rport_s *rport;
+
+	bfa_trc(port->fcs, rpid);
+
+	/**
+	 * If this is an unknown device, then it just came online.
+	 * Otherwise let rport handle the RSCN event.
+	 */
+	rport = bfa_fcs_port_get_rport_by_pid(port, rpid);
+	if (rport == NULL) {
+		/*
+		 * If min cfg mode is enabled, we donot need to
+		 * discover any new rports.
+		 */
+		if (!__fcs_min_cfg(port->fcs))
+			rport = bfa_fcs_rport_create(port, rpid);
+	} else {
+		bfa_fcs_rport_scn(rport);
+	}
+}
+
+/**
+ * rscn format based PID comparison
+ */
+#define __fc_pid_match(__c0, __c1, __fmt)		\
+	(((__fmt) == FC_RSCN_FORMAT_FABRIC) ||		\
+	 (((__fmt) == FC_RSCN_FORMAT_DOMAIN) &&		\
+	  ((__c0)[0] == (__c1)[0])) ||			\
+	 (((__fmt) == FC_RSCN_FORMAT_AREA) &&		\
+	  ((__c0)[0] == (__c1)[0]) &&			\
+	  ((__c0)[1] == (__c1)[1])))
+
+static void
+bfa_fcs_port_scn_multiport_rscn(struct bfa_fcs_port_s *port,
+			enum fc_rscn_format format, u32 rscn_pid)
+{
+	struct bfa_fcs_rport_s *rport;
+	struct list_head *qe, *qe_next;
+	u8        *c0, *c1;
+
+	bfa_trc(port->fcs, format);
+	bfa_trc(port->fcs, rscn_pid);
+
+	c0 = (u8 *) &rscn_pid;
+
+	list_for_each_safe(qe, qe_next, &port->rport_q) {
+		rport = (struct bfa_fcs_rport_s *)qe;
+		c1 = (u8 *) &rport->pid;
+		if (__fc_pid_match(c0, c1, format))
+			bfa_fcs_rport_scn(rport);
+	}
+}
+
+void
+bfa_fcs_port_scn_process_rscn(struct bfa_fcs_port_s *port, struct fchs_s *fchs,
+			      u32 len)
+{
+	struct fc_rscn_pl_s   *rscn = (struct fc_rscn_pl_s *) (fchs + 1);
+	int             num_entries;
+	u32        rscn_pid;
+	bfa_boolean_t   nsquery = BFA_FALSE;
+	int             i = 0;
+
+	num_entries =
+		(bfa_os_ntohs(rscn->payldlen) -
+		 sizeof(u32)) / sizeof(rscn->event[0]);
+
+	bfa_trc(port->fcs, num_entries);
+
+	port->stats.num_rscn++;
+
+	bfa_fcs_port_scn_send_ls_acc(port, fchs);
+
+	for (i = 0; i < num_entries; i++) {
+		rscn_pid = rscn->event[i].portid;
+
+		bfa_trc(port->fcs, rscn->event[i].format);
+		bfa_trc(port->fcs, rscn_pid);
+
+		switch (rscn->event[i].format) {
+		case FC_RSCN_FORMAT_PORTID:
+			if (rscn->event[i].qualifier == FC_QOS_RSCN_EVENT) {
+				/*
+				 * Ignore this event. f/w would have processed
+				 * it
+				 */
+				bfa_trc(port->fcs, rscn_pid);
+			} else {
+				port->stats.num_portid_rscn++;
+				bfa_fcs_port_scn_portid_rscn(port, rscn_pid);
+			}
+			break;
+
+		case FC_RSCN_FORMAT_FABRIC:
+			if (rscn->event[i].qualifier ==
+			    FC_FABRIC_NAME_RSCN_EVENT) {
+				bfa_fcs_port_ms_fabric_rscn(port);
+				break;
+			}
+			/*
+			 * !!!!!!!!! Fall Through !!!!!!!!!!!!!
+			 */
+
+		case FC_RSCN_FORMAT_AREA:
+		case FC_RSCN_FORMAT_DOMAIN:
+			nsquery = BFA_TRUE;
+			bfa_fcs_port_scn_multiport_rscn(port,
+							rscn->event[i].format,
+							rscn_pid);
+			break;
+
+		default:
+			bfa_assert(0);
+			nsquery = BFA_TRUE;
+		}
+	}
+
+	/**
+	 * If any of area, domain or fabric RSCN is received, do a fresh discovery
+	 * to find new devices.
+	 */
+	if (nsquery)
+		bfa_fcs_port_ns_query(port);
+}
+
+
diff --git a/drivers/scsi/bfa/vfapi.c b/drivers/scsi/bfa/vfapi.c
new file mode 100644
index 000000000000..31d81fe2fc48
--- /dev/null
+++ b/drivers/scsi/bfa/vfapi.c
@@ -0,0 +1,292 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  vfapi.c Fabric module implementation.
+ */
+
+#include "fcs_fabric.h"
+#include "fcs_trcmod.h"
+
+BFA_TRC_FILE(FCS, VFAPI);
+
+/**
+ *  fcs_vf_api virtual fabrics API
+ */
+
+/**
+ * 		Enable VF mode.
+ *
+ * @param[in]		fcs		fcs module instance
+ * @param[in]		vf_id		default vf_id of port, FC_VF_ID_NULL
+ * 					to use standard default vf_id of 1.
+ *
+ * @retval	BFA_STATUS_OK		vf mode is enabled
+ * @retval	BFA_STATUS_BUSY		Port is active. Port must be disabled
+ *					before VF mode can be enabled.
+ */
+bfa_status_t
+bfa_fcs_vf_mode_enable(struct bfa_fcs_s *fcs, u16 vf_id)
+{
+	return BFA_STATUS_OK;
+}
+
+/**
+ * 		Disable VF mode.
+ *
+ * @param[in]		fcs		fcs module instance
+ *
+ * @retval	BFA_STATUS_OK		vf mode is disabled
+ * @retval	BFA_STATUS_BUSY		VFs are present and being used. All
+ * 					VFs must be deleted before disabling
+ *					VF mode.
+ */
+bfa_status_t
+bfa_fcs_vf_mode_disable(struct bfa_fcs_s *fcs)
+{
+	return BFA_STATUS_OK;
+}
+
+/**
+ * 		Create a new VF instance.
+ *
+ *  A new VF is created using the given VF configuration. A VF is identified
+ *  by VF id. No duplicate VF creation is allowed with the same VF id. Once
+ *  a VF is created, VF is automatically started after link initialization
+ *  and EVFP exchange is completed.
+ *
+ * 	param[in] vf		- 	FCS vf data structure. Memory is
+ *					allocated by caller (driver)
+ * 	param[in] fcs 		- 	FCS module
+ * 	param[in] vf_cfg	- 	VF configuration
+ * 	param[in] vf_drv 	- 	Opaque handle back to the driver's
+ *					virtual vf structure
+ *
+ * 	retval BFA_STATUS_OK VF creation is successful
+ * 	retval BFA_STATUS_FAILED VF creation failed
+ * 	retval BFA_STATUS_EEXIST A VF exists with the given vf_id
+ */
+bfa_status_t
+bfa_fcs_vf_create(bfa_fcs_vf_t *vf, struct bfa_fcs_s *fcs, u16 vf_id,
+		  struct bfa_port_cfg_s *port_cfg, struct bfad_vf_s *vf_drv)
+{
+	bfa_trc(fcs, vf_id);
+	return BFA_STATUS_OK;
+}
+
+/**
+ *  	Use this function to delete a BFA VF object. VF object should
+ * 		be stopped before this function call.
+ *
+ * 	param[in] vf - pointer to bfa_vf_t.
+ *
+ * 	retval BFA_STATUS_OK	On vf deletion success
+ * 	retval BFA_STATUS_BUSY VF is not in a stopped state
+ * 	retval BFA_STATUS_INPROGRESS VF deletion in in progress
+ */
+bfa_status_t
+bfa_fcs_vf_delete(bfa_fcs_vf_t *vf)
+{
+	bfa_trc(vf->fcs, vf->vf_id);
+	return BFA_STATUS_OK;
+}
+
+/**
+ *  	Start participation in VF. This triggers login to the virtual fabric.
+ *
+ * 	param[in] vf - pointer to bfa_vf_t.
+ *
+ * 	return None
+ */
+void
+bfa_fcs_vf_start(bfa_fcs_vf_t *vf)
+{
+	bfa_trc(vf->fcs, vf->vf_id);
+}
+
+/**
+ *  	Logout with the virtual fabric.
+ *
+ * 	param[in] vf - pointer to bfa_vf_t.
+ *
+ * 	retval BFA_STATUS_OK 	On success.
+ * 	retval BFA_STATUS_INPROGRESS VF is being stopped.
+ */
+bfa_status_t
+bfa_fcs_vf_stop(bfa_fcs_vf_t *vf)
+{
+	bfa_trc(vf->fcs, vf->vf_id);
+	return BFA_STATUS_OK;
+}
+
+/**
+ *  	Returns attributes of the given VF.
+ *
+ * 	param[in] 	vf			pointer to bfa_vf_t.
+ * 	param[out] vf_attr 	vf attributes returned
+ *
+ * 	return None
+ */
+void
+bfa_fcs_vf_get_attr(bfa_fcs_vf_t *vf, struct bfa_vf_attr_s *vf_attr)
+{
+	bfa_trc(vf->fcs, vf->vf_id);
+}
+
+/**
+ * 		Return statistics associated with the given vf.
+ *
+ * 	param[in] 	vf			pointer to bfa_vf_t.
+ * 	param[out] vf_stats 	vf statistics returned
+ *
+ *  @return None
+ */
+void
+bfa_fcs_vf_get_stats(bfa_fcs_vf_t *vf, struct bfa_vf_stats_s *vf_stats)
+{
+	bfa_os_memcpy(vf_stats, &vf->stats, sizeof(struct bfa_vf_stats_s));
+	return;
+}
+
+void
+/**
+ * 		clear statistics associated with the given vf.
+ *
+ * 	param[in] 	vf			pointer to bfa_vf_t.
+ *
+ *  @return None
+ */
+bfa_fcs_vf_clear_stats(bfa_fcs_vf_t *vf)
+{
+	bfa_os_memset(&vf->stats, 0, sizeof(struct bfa_vf_stats_s));
+	return;
+}
+
+/**
+ *  	Returns FCS vf structure for a given vf_id.
+ *
+ * 	param[in] 	vf_id		- VF_ID
+ *
+ * 	return
+ * 		If lookup succeeds, retuns fcs vf object, otherwise returns NULL
+ */
+bfa_fcs_vf_t   *
+bfa_fcs_vf_lookup(struct bfa_fcs_s *fcs, u16 vf_id)
+{
+	bfa_trc(fcs, vf_id);
+	if (vf_id == FC_VF_ID_NULL)
+		return (&fcs->fabric);
+
+	/**
+	 * @todo vf support
+	 */
+
+	return NULL;
+}
+
+/**
+ *  	Returns driver VF structure for a given FCS vf.
+ *
+ * 	param[in] 	vf		- pointer to bfa_vf_t
+ *
+ * 	return Driver VF structure
+ */
+struct bfad_vf_s      *
+bfa_fcs_vf_get_drv_vf(bfa_fcs_vf_t *vf)
+{
+	bfa_assert(vf);
+	bfa_trc(vf->fcs, vf->vf_id);
+	return vf->vf_drv;
+}
+
+/**
+ *  	Return the list of VFs configured.
+ *
+ * 	param[in]	fcs	fcs module instance
+ * 	param[out] 	vf_ids	returned list of vf_ids
+ * 	param[in,out] 	nvfs	in:size of vf_ids array,
+ * 				out:total elements present,
+ * 				actual elements returned is limited by the size
+ *
+ * 	return Driver VF structure
+ */
+void
+bfa_fcs_vf_list(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs)
+{
+	bfa_trc(fcs, *nvfs);
+}
+
+/**
+ *  	Return the list of all VFs visible from fabric.
+ *
+ * 	param[in]	fcs	fcs module instance
+ * 	param[out] 	vf_ids	returned list of vf_ids
+ * 	param[in,out] 	nvfs	in:size of vf_ids array,
+ *				out:total elements present,
+ * 				actual elements returned is limited by the size
+ *
+ * 	return Driver VF structure
+ */
+void
+bfa_fcs_vf_list_all(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs)
+{
+	bfa_trc(fcs, *nvfs);
+}
+
+/**
+ * 		Return the list of local logical ports present in the given VF.
+ *
+ * 	param[in]	vf	vf for which logical ports are returned
+ * 	param[out] 	lpwwn	returned logical port wwn list
+ * 	param[in,out] 	nlports	in:size of lpwwn list;
+ *				out:total elements present,
+ * 				actual elements returned is limited by the size
+ *
+ */
+void
+bfa_fcs_vf_get_ports(bfa_fcs_vf_t *vf, wwn_t lpwwn[], int *nlports)
+{
+	struct list_head        *qe;
+	struct bfa_fcs_vport_s *vport;
+	int             i;
+	struct bfa_fcs_s      *fcs;
+
+	if (vf == NULL || lpwwn == NULL || *nlports == 0)
+		return;
+
+	fcs = vf->fcs;
+
+	bfa_trc(fcs, vf->vf_id);
+	bfa_trc(fcs, (u32) *nlports);
+
+	i = 0;
+	lpwwn[i++] = vf->bport.port_cfg.pwwn;
+
+	list_for_each(qe, &vf->vport_q) {
+		if (i >= *nlports)
+			break;
+
+		vport = (struct bfa_fcs_vport_s *) qe;
+		lpwwn[i++] = vport->lport.port_cfg.pwwn;
+	}
+
+	bfa_trc(fcs, i);
+	*nlports = i;
+	return;
+}
+
+
diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c
new file mode 100644
index 000000000000..c10af06c5714
--- /dev/null
+++ b/drivers/scsi/bfa/vport.c
@@ -0,0 +1,891 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs_vport.c FCS virtual port state machine
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <fcbuild.h>
+#include "fcs_fabric.h"
+#include "fcs_lport.h"
+#include "fcs_vport.h"
+#include "fcs_trcmod.h"
+#include "fcs.h"
+#include <aen/bfa_aen_lport.h>
+
+BFA_TRC_FILE(FCS, VPORT);
+
+#define __vport_fcs(__vp)       (__vp)->lport.fcs
+#define __vport_pwwn(__vp)      (__vp)->lport.port_cfg.pwwn
+#define __vport_nwwn(__vp)      (__vp)->lport.port_cfg.nwwn
+#define __vport_bfa(__vp)       (__vp)->lport.fcs->bfa
+#define __vport_fcid(__vp)      (__vp)->lport.pid
+#define __vport_fabric(__vp)    (__vp)->lport.fabric
+#define __vport_vfid(__vp)      (__vp)->lport.fabric->vf_id
+
+#define BFA_FCS_VPORT_MAX_RETRIES  5
+/*
+ * Forward declarations
+ */
+static void     bfa_fcs_vport_do_fdisc(struct bfa_fcs_vport_s *vport);
+static void     bfa_fcs_vport_timeout(void *vport_arg);
+static void     bfa_fcs_vport_do_logo(struct bfa_fcs_vport_s *vport);
+static void     bfa_fcs_vport_free(struct bfa_fcs_vport_s *vport);
+
+/**
+ *  fcs_vport_sm FCS virtual port state machine
+ */
+
+/**
+ * VPort State Machine events
+ */
+enum bfa_fcs_vport_event {
+	BFA_FCS_VPORT_SM_CREATE = 1,	/*  vport create event */
+	BFA_FCS_VPORT_SM_DELETE = 2,	/*  vport delete event */
+	BFA_FCS_VPORT_SM_START = 3,	/*  vport start request */
+	BFA_FCS_VPORT_SM_STOP = 4,	/*  stop: unsupported */
+	BFA_FCS_VPORT_SM_ONLINE = 5,	/*  fabric online */
+	BFA_FCS_VPORT_SM_OFFLINE = 6,	/*  fabric offline event */
+	BFA_FCS_VPORT_SM_FRMSENT = 7,	/*  fdisc/logo sent events */
+	BFA_FCS_VPORT_SM_RSP_OK = 8,	/*  good response */
+	BFA_FCS_VPORT_SM_RSP_ERROR = 9,	/*  error/bad response */
+	BFA_FCS_VPORT_SM_TIMEOUT = 10,	/*  delay timer event */
+	BFA_FCS_VPORT_SM_DELCOMP = 11,	/*  lport delete completion */
+	BFA_FCS_VPORT_SM_RSP_DUP_WWN = 12,	/*  Dup wnn error */
+	BFA_FCS_VPORT_SM_RSP_FAILED = 13,	/*  non-retryable failure */
+};
+
+static void     bfa_fcs_vport_sm_uninit(struct bfa_fcs_vport_s *vport,
+					enum bfa_fcs_vport_event event);
+static void     bfa_fcs_vport_sm_created(struct bfa_fcs_vport_s *vport,
+					 enum bfa_fcs_vport_event event);
+static void     bfa_fcs_vport_sm_offline(struct bfa_fcs_vport_s *vport,
+					 enum bfa_fcs_vport_event event);
+static void     bfa_fcs_vport_sm_fdisc(struct bfa_fcs_vport_s *vport,
+				       enum bfa_fcs_vport_event event);
+static void     bfa_fcs_vport_sm_fdisc_retry(struct bfa_fcs_vport_s *vport,
+					     enum bfa_fcs_vport_event event);
+static void     bfa_fcs_vport_sm_online(struct bfa_fcs_vport_s *vport,
+					enum bfa_fcs_vport_event event);
+static void     bfa_fcs_vport_sm_deleting(struct bfa_fcs_vport_s *vport,
+					  enum bfa_fcs_vport_event event);
+static void     bfa_fcs_vport_sm_cleanup(struct bfa_fcs_vport_s *vport,
+					 enum bfa_fcs_vport_event event);
+static void     bfa_fcs_vport_sm_logo(struct bfa_fcs_vport_s *vport,
+				      enum bfa_fcs_vport_event event);
+static void     bfa_fcs_vport_sm_error(struct bfa_fcs_vport_s *vport,
+				       enum bfa_fcs_vport_event event);
+
+static struct bfa_sm_table_s vport_sm_table[] = {
+	{BFA_SM(bfa_fcs_vport_sm_uninit), BFA_FCS_VPORT_UNINIT},
+	{BFA_SM(bfa_fcs_vport_sm_created), BFA_FCS_VPORT_CREATED},
+	{BFA_SM(bfa_fcs_vport_sm_offline), BFA_FCS_VPORT_OFFLINE},
+	{BFA_SM(bfa_fcs_vport_sm_fdisc), BFA_FCS_VPORT_FDISC},
+	{BFA_SM(bfa_fcs_vport_sm_fdisc_retry), BFA_FCS_VPORT_FDISC_RETRY},
+	{BFA_SM(bfa_fcs_vport_sm_online), BFA_FCS_VPORT_ONLINE},
+	{BFA_SM(bfa_fcs_vport_sm_deleting), BFA_FCS_VPORT_DELETING},
+	{BFA_SM(bfa_fcs_vport_sm_cleanup), BFA_FCS_VPORT_CLEANUP},
+	{BFA_SM(bfa_fcs_vport_sm_logo), BFA_FCS_VPORT_LOGO},
+	{BFA_SM(bfa_fcs_vport_sm_error), BFA_FCS_VPORT_ERROR}
+};
+
+/**
+ * Beginning state.
+ */
+static void
+bfa_fcs_vport_sm_uninit(struct bfa_fcs_vport_s *vport,
+			enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_CREATE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_created);
+		bfa_fcs_fabric_addvport(__vport_fabric(vport), vport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Created state - a start event is required to start up the state machine.
+ */
+static void
+bfa_fcs_vport_sm_created(struct bfa_fcs_vport_s *vport,
+			 enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_START:
+		if (bfa_fcs_fabric_is_online(__vport_fabric(vport))
+		    && bfa_fcs_fabric_npiv_capable(__vport_fabric(vport))) {
+			bfa_sm_set_state(vport, bfa_fcs_vport_sm_fdisc);
+			bfa_fcs_vport_do_fdisc(vport);
+		} else {
+			/**
+			 * Fabric is offline or not NPIV capable, stay in
+			 * offline state.
+			 */
+			vport->vport_stats.fab_no_npiv++;
+			bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+		}
+		break;
+
+	case BFA_FCS_VPORT_SM_DELETE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_cleanup);
+		bfa_fcs_port_delete(&vport->lport);
+		break;
+
+	case BFA_FCS_VPORT_SM_ONLINE:
+	case BFA_FCS_VPORT_SM_OFFLINE:
+		/**
+		 * Ignore ONLINE/OFFLINE events from fabric till vport is started.
+		 */
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Offline state - awaiting ONLINE event from fabric SM.
+ */
+static void
+bfa_fcs_vport_sm_offline(struct bfa_fcs_vport_s *vport,
+			 enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_DELETE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_cleanup);
+		bfa_fcs_port_delete(&vport->lport);
+		break;
+
+	case BFA_FCS_VPORT_SM_ONLINE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_fdisc);
+		vport->fdisc_retries = 0;
+		bfa_fcs_vport_do_fdisc(vport);
+		break;
+
+	case BFA_FCS_VPORT_SM_OFFLINE:
+		/*
+		 * This can happen if the vport couldn't be initialzied due
+		 * the fact that the npiv was not enabled on the switch. In
+		 * that case we will put the vport in offline state. However,
+		 * the link can go down and cause the this event to be sent when
+		 * we are already offline. Ignore it.
+		 */
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * FDISC is sent and awaiting reply from fabric.
+ */
+static void
+bfa_fcs_vport_sm_fdisc(struct bfa_fcs_vport_s *vport,
+		       enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_DELETE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_logo);
+		bfa_lps_discard(vport->lps);
+		bfa_fcs_vport_do_logo(vport);
+		break;
+
+	case BFA_FCS_VPORT_SM_OFFLINE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+		bfa_lps_discard(vport->lps);
+		break;
+
+	case BFA_FCS_VPORT_SM_RSP_OK:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_online);
+		bfa_fcs_port_online(&vport->lport);
+		break;
+
+	case BFA_FCS_VPORT_SM_RSP_ERROR:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_fdisc_retry);
+		bfa_timer_start(__vport_bfa(vport), &vport->timer,
+				bfa_fcs_vport_timeout, vport,
+				BFA_FCS_RETRY_TIMEOUT);
+		break;
+
+	case BFA_FCS_VPORT_SM_RSP_FAILED:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+		break;
+
+	case BFA_FCS_VPORT_SM_RSP_DUP_WWN:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_error);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * FDISC attempt failed - a timer is active to retry FDISC.
+ */
+static void
+bfa_fcs_vport_sm_fdisc_retry(struct bfa_fcs_vport_s *vport,
+			     enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_DELETE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_cleanup);
+		bfa_timer_stop(&vport->timer);
+		bfa_fcs_port_delete(&vport->lport);
+		break;
+
+	case BFA_FCS_VPORT_SM_OFFLINE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+		bfa_timer_stop(&vport->timer);
+		break;
+
+	case BFA_FCS_VPORT_SM_TIMEOUT:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_fdisc);
+		vport->vport_stats.fdisc_retries++;
+		vport->fdisc_retries++;
+		bfa_fcs_vport_do_fdisc(vport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Vport is online (FDISC is complete).
+ */
+static void
+bfa_fcs_vport_sm_online(struct bfa_fcs_vport_s *vport,
+			enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_DELETE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_deleting);
+		bfa_fcs_port_delete(&vport->lport);
+		break;
+
+	case BFA_FCS_VPORT_SM_OFFLINE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+		bfa_lps_discard(vport->lps);
+		bfa_fcs_port_offline(&vport->lport);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Vport is being deleted - awaiting lport delete completion to send
+ * LOGO to fabric.
+ */
+static void
+bfa_fcs_vport_sm_deleting(struct bfa_fcs_vport_s *vport,
+			  enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_DELETE:
+		break;
+
+	case BFA_FCS_VPORT_SM_DELCOMP:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_logo);
+		bfa_fcs_vport_do_logo(vport);
+		break;
+
+	case BFA_FCS_VPORT_SM_OFFLINE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_cleanup);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * Error State.
+ * This state will be set when the Vport Creation fails due to errors like
+ * Dup WWN. In this state only operation allowed is a Vport Delete.
+ */
+static void
+bfa_fcs_vport_sm_error(struct bfa_fcs_vport_s *vport,
+		       enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_DELETE:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_uninit);
+		bfa_fcs_vport_free(vport);
+		break;
+
+	default:
+		bfa_trc(__vport_fcs(vport), event);
+	}
+}
+
+/**
+ * Lport cleanup is in progress since vport is being deleted. Fabric is
+ * offline, so no LOGO is needed to complete vport deletion.
+ */
+static void
+bfa_fcs_vport_sm_cleanup(struct bfa_fcs_vport_s *vport,
+			 enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_DELCOMP:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_uninit);
+		bfa_fcs_vport_free(vport);
+		break;
+
+	case BFA_FCS_VPORT_SM_DELETE:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+/**
+ * LOGO is sent to fabric. Vport delete is in progress. Lport delete cleanup
+ * is done.
+ */
+static void
+bfa_fcs_vport_sm_logo(struct bfa_fcs_vport_s *vport,
+		      enum bfa_fcs_vport_event event)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), event);
+
+	switch (event) {
+	case BFA_FCS_VPORT_SM_OFFLINE:
+		bfa_lps_discard(vport->lps);
+		/*
+		 * !!! fall through !!!
+		 */
+
+	case BFA_FCS_VPORT_SM_RSP_OK:
+	case BFA_FCS_VPORT_SM_RSP_ERROR:
+		bfa_sm_set_state(vport, bfa_fcs_vport_sm_uninit);
+		bfa_fcs_vport_free(vport);
+		break;
+
+	case BFA_FCS_VPORT_SM_DELETE:
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+
+
+/**
+ *  fcs_vport_private FCS virtual port private functions
+ */
+
+/**
+ * Send AEN notification
+ */
+static void
+bfa_fcs_vport_aen_post(bfa_fcs_lport_t *port, enum bfa_lport_aen_event event)
+{
+	union bfa_aen_data_u aen_data;
+	struct bfa_log_mod_s *logmod = port->fcs->logm;
+	enum bfa_port_role role = port->port_cfg.roles;
+	wwn_t           lpwwn = bfa_fcs_port_get_pwwn(port);
+	char            lpwwn_ptr[BFA_STRING_32];
+	char           *role_str[BFA_PORT_ROLE_FCP_MAX / 2 + 1] =
+		{ "Initiator", "Target", "IPFC" };
+
+	wwn2str(lpwwn_ptr, lpwwn);
+
+	bfa_assert(role <= BFA_PORT_ROLE_FCP_MAX);
+
+	switch (event) {
+	case BFA_LPORT_AEN_NPIV_DUP_WWN:
+		bfa_log(logmod, BFA_AEN_LPORT_NPIV_DUP_WWN, lpwwn_ptr,
+			role_str[role / 2]);
+		break;
+	case BFA_LPORT_AEN_NPIV_FABRIC_MAX:
+		bfa_log(logmod, BFA_AEN_LPORT_NPIV_FABRIC_MAX, lpwwn_ptr,
+			role_str[role / 2]);
+		break;
+	case BFA_LPORT_AEN_NPIV_UNKNOWN:
+		bfa_log(logmod, BFA_AEN_LPORT_NPIV_UNKNOWN, lpwwn_ptr,
+			role_str[role / 2]);
+		break;
+	default:
+		break;
+	}
+
+	aen_data.lport.vf_id = port->fabric->vf_id;
+	aen_data.lport.roles = role;
+	aen_data.lport.ppwwn =
+		bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(port->fcs));
+	aen_data.lport.lpwwn = lpwwn;
+}
+
+/**
+ * This routine will be called to send a FDISC command.
+ */
+static void
+bfa_fcs_vport_do_fdisc(struct bfa_fcs_vport_s *vport)
+{
+	bfa_lps_fdisc(vport->lps, vport,
+		      bfa_pport_get_maxfrsize(__vport_bfa(vport)),
+		      __vport_pwwn(vport), __vport_nwwn(vport));
+	vport->vport_stats.fdisc_sent++;
+}
+
+static void
+bfa_fcs_vport_fdisc_rejected(struct bfa_fcs_vport_s *vport)
+{
+	u8         lsrjt_rsn = bfa_lps_get_lsrjt_rsn(vport->lps);
+	u8         lsrjt_expl = bfa_lps_get_lsrjt_expl(vport->lps);
+
+	bfa_trc(__vport_fcs(vport), lsrjt_rsn);
+	bfa_trc(__vport_fcs(vport), lsrjt_expl);
+
+	/*
+	 * For certain reason codes, we don't want to retry.
+	 */
+	switch (bfa_lps_get_lsrjt_expl(vport->lps)) {
+	case FC_LS_RJT_EXP_INV_PORT_NAME:	/* by brocade */
+	case FC_LS_RJT_EXP_INVALID_NPORT_ID:	/* by Cisco */
+		if (vport->fdisc_retries < BFA_FCS_VPORT_MAX_RETRIES)
+			bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+		else {
+			bfa_fcs_vport_aen_post(&vport->lport,
+					       BFA_LPORT_AEN_NPIV_DUP_WWN);
+			bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_DUP_WWN);
+		}
+		break;
+
+	case FC_LS_RJT_EXP_INSUFF_RES:
+		/*
+		 * This means max logins per port/switch setting on the
+		 * switch was exceeded.
+		 */
+		if (vport->fdisc_retries < BFA_FCS_VPORT_MAX_RETRIES)
+			bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+		else {
+			bfa_fcs_vport_aen_post(&vport->lport,
+					       BFA_LPORT_AEN_NPIV_FABRIC_MAX);
+			bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_FAILED);
+		}
+		break;
+
+	default:
+		if (vport->fdisc_retries == 0)	/* Print only once */
+			bfa_fcs_vport_aen_post(&vport->lport,
+					       BFA_LPORT_AEN_NPIV_UNKNOWN);
+		bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+	}
+}
+
+/**
+ * 	Called to send a logout to the fabric. Used when a V-Port is
+ * 	deleted/stopped.
+ */
+static void
+bfa_fcs_vport_do_logo(struct bfa_fcs_vport_s *vport)
+{
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+
+	vport->vport_stats.logo_sent++;
+	bfa_lps_fdisclogo(vport->lps);
+}
+
+/**
+ *     This routine will be called by bfa_timer on timer timeouts.
+ *
+ * 	param[in] 	vport 		- pointer to bfa_fcs_vport_t.
+ * 	param[out]	vport_status 	- pointer to return vport status in
+ *
+ * 	return
+ * 		void
+ *
+* 	Special Considerations:
+ *
+ * 	note
+ */
+static void
+bfa_fcs_vport_timeout(void *vport_arg)
+{
+	struct bfa_fcs_vport_s *vport = (struct bfa_fcs_vport_s *)vport_arg;
+
+	vport->vport_stats.fdisc_timeouts++;
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_TIMEOUT);
+}
+
+static void
+bfa_fcs_vport_free(struct bfa_fcs_vport_s *vport)
+{
+	bfa_fcs_fabric_delvport(__vport_fabric(vport), vport);
+	bfa_fcb_vport_delete(vport->vport_drv);
+	bfa_lps_delete(vport->lps);
+}
+
+
+
+/**
+ *  fcs_vport_public FCS virtual port public interfaces
+ */
+
+/**
+ * Online notification from fabric SM.
+ */
+void
+bfa_fcs_vport_online(struct bfa_fcs_vport_s *vport)
+{
+	vport->vport_stats.fab_online++;
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_ONLINE);
+}
+
+/**
+ * Offline notification from fabric SM.
+ */
+void
+bfa_fcs_vport_offline(struct bfa_fcs_vport_s *vport)
+{
+	vport->vport_stats.fab_offline++;
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_OFFLINE);
+}
+
+/**
+ * Cleanup notification from fabric SM on link timer expiry.
+ */
+void
+bfa_fcs_vport_cleanup(struct bfa_fcs_vport_s *vport)
+{
+	vport->vport_stats.fab_cleanup++;
+}
+
+/**
+ * Delete completion callback from associated lport
+ */
+void
+bfa_fcs_vport_delete_comp(struct bfa_fcs_vport_s *vport)
+{
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_DELCOMP);
+}
+
+/**
+ *   Module initialization
+ */
+void
+bfa_fcs_vport_modinit(struct bfa_fcs_s *fcs)
+{
+}
+
+/**
+ *   Module cleanup
+ */
+void
+bfa_fcs_vport_modexit(struct bfa_fcs_s *fcs)
+{
+	bfa_fcs_modexit_comp(fcs);
+}
+
+u32
+bfa_fcs_vport_get_max(struct bfa_fcs_s *fcs)
+{
+	struct bfa_ioc_attr_s ioc_attr;
+
+	bfa_get_attr(fcs->bfa, &ioc_attr);
+
+	if (ioc_attr.pci_attr.device_id == BFA_PCI_DEVICE_ID_CT)
+		return (BFA_FCS_MAX_VPORTS_SUPP_CT);
+	else
+		return (BFA_FCS_MAX_VPORTS_SUPP_CB);
+}
+
+
+
+/**
+ *  fcs_vport_api Virtual port API
+ */
+
+/**
+ *  	Use this function to instantiate a new FCS vport object. This
+ * 	function will not trigger any HW initialization process (which will be
+ * 	done in vport_start() call)
+ *
+ * 	param[in] vport	- 	pointer to bfa_fcs_vport_t. This space
+ * 					needs to be allocated by the driver.
+ * 	param[in] fcs 		- 	FCS instance
+ * 	param[in] vport_cfg	- 	vport configuration
+ * 	param[in] vf_id    	- 	VF_ID if vport is created within a VF.
+ *                          		FC_VF_ID_NULL to specify base fabric.
+ * 	param[in] vport_drv 	- 	Opaque handle back to the driver's vport
+ * 					structure
+ *
+ * 	retval BFA_STATUS_OK - on success.
+ * 	retval BFA_STATUS_FAILED - on failure.
+ */
+bfa_status_t
+bfa_fcs_vport_create(struct bfa_fcs_vport_s *vport, struct bfa_fcs_s *fcs,
+		     u16 vf_id, struct bfa_port_cfg_s *vport_cfg,
+		     struct bfad_vport_s *vport_drv)
+{
+	if (vport_cfg->pwwn == 0)
+		return (BFA_STATUS_INVALID_WWN);
+
+	if (bfa_fcs_port_get_pwwn(&fcs->fabric.bport) == vport_cfg->pwwn)
+		return BFA_STATUS_VPORT_WWN_BP;
+
+	if (bfa_fcs_vport_lookup(fcs, vf_id, vport_cfg->pwwn) != NULL)
+		return BFA_STATUS_VPORT_EXISTS;
+
+	if (bfa_fcs_fabric_vport_count(&fcs->fabric) ==
+	    bfa_fcs_vport_get_max(fcs))
+		return BFA_STATUS_VPORT_MAX;
+
+	vport->lps = bfa_lps_alloc(fcs->bfa);
+	if (!vport->lps)
+		return BFA_STATUS_VPORT_MAX;
+
+	vport->vport_drv = vport_drv;
+	bfa_sm_set_state(vport, bfa_fcs_vport_sm_uninit);
+
+	bfa_fcs_lport_init(&vport->lport, fcs, vf_id, vport_cfg, vport);
+
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_CREATE);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ *  	Use this function initialize the vport.
+ *
+ *  @param[in] vport - pointer to bfa_fcs_vport_t.
+ *
+ *  @returns None
+ */
+bfa_status_t
+bfa_fcs_vport_start(struct bfa_fcs_vport_s *vport)
+{
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_START);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ *  	Use this function quiese the vport object. This function will return
+ * 	immediately, when the vport is actually stopped, the
+ * 	bfa_drv_vport_stop_cb() will be called.
+ *
+ * 	param[in] vport - pointer to bfa_fcs_vport_t.
+ *
+ * 	return None
+ */
+bfa_status_t
+bfa_fcs_vport_stop(struct bfa_fcs_vport_s *vport)
+{
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_STOP);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ *  	Use this function to delete a vport object. Fabric object should
+ * 		be stopped before this function call.
+ *
+ * 	param[in] vport - pointer to bfa_fcs_vport_t.
+ *
+ * 	return     None
+ */
+bfa_status_t
+bfa_fcs_vport_delete(struct bfa_fcs_vport_s *vport)
+{
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_DELETE);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ *  	Use this function to get vport's current status info.
+ *
+ * 	param[in] 	vport 		pointer to bfa_fcs_vport_t.
+ * 	param[out]	attr 		pointer to return vport attributes
+ *
+ * 	return None
+ */
+void
+bfa_fcs_vport_get_attr(struct bfa_fcs_vport_s *vport,
+		       struct bfa_vport_attr_s *attr)
+{
+	if (vport == NULL || attr == NULL)
+		return;
+
+	bfa_os_memset(attr, 0, sizeof(struct bfa_vport_attr_s));
+
+	bfa_fcs_port_get_attr(&vport->lport, &attr->port_attr);
+	attr->vport_state = bfa_sm_to_state(vport_sm_table, vport->sm);
+}
+
+/**
+ *  	Use this function to get vport's statistics.
+ *
+ * 	param[in] 	vport 		pointer to bfa_fcs_vport_t.
+ * 	param[out]	stats		pointer to return vport statistics in
+ *
+ * 	return None
+ */
+void
+bfa_fcs_vport_get_stats(struct bfa_fcs_vport_s *vport,
+			struct bfa_vport_stats_s *stats)
+{
+	*stats = vport->vport_stats;
+}
+
+/**
+ *  	Use this function to clear vport's statistics.
+ *
+ * 	param[in] 	vport 		pointer to bfa_fcs_vport_t.
+ *
+ * 	return None
+ */
+void
+bfa_fcs_vport_clr_stats(struct bfa_fcs_vport_s *vport)
+{
+	bfa_os_memset(&vport->vport_stats, 0, sizeof(struct bfa_vport_stats_s));
+}
+
+/**
+ *      Lookup a virtual port. Excludes base port from lookup.
+ */
+struct bfa_fcs_vport_s *
+bfa_fcs_vport_lookup(struct bfa_fcs_s *fcs, u16 vf_id, wwn_t vpwwn)
+{
+	struct bfa_fcs_vport_s *vport;
+	struct bfa_fcs_fabric_s *fabric;
+
+	bfa_trc(fcs, vf_id);
+	bfa_trc(fcs, vpwwn);
+
+	fabric = bfa_fcs_vf_lookup(fcs, vf_id);
+	if (!fabric) {
+		bfa_trc(fcs, vf_id);
+		return NULL;
+	}
+
+	vport = bfa_fcs_fabric_vport_lookup(fabric, vpwwn);
+	return vport;
+}
+
+/**
+ * FDISC Response
+ */
+void
+bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
+{
+	struct bfa_fcs_vport_s *vport = uarg;
+
+	bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+	bfa_trc(__vport_fcs(vport), status);
+
+	switch (status) {
+	case BFA_STATUS_OK:
+		/*
+		 * Initialiaze the V-Port fields
+		 */
+		__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
+		vport->vport_stats.fdisc_accepts++;
+		bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_OK);
+		break;
+
+	case BFA_STATUS_INVALID_MAC:
+		/*
+		 * Only for CNA
+		 */
+		vport->vport_stats.fdisc_acc_bad++;
+		bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+
+		break;
+
+	case BFA_STATUS_EPROTOCOL:
+		switch (bfa_lps_get_extstatus(vport->lps)) {
+		case BFA_EPROTO_BAD_ACCEPT:
+			vport->vport_stats.fdisc_acc_bad++;
+			break;
+
+		case BFA_EPROTO_UNKNOWN_RSP:
+			vport->vport_stats.fdisc_unknown_rsp++;
+			break;
+
+		default:
+			break;
+		}
+
+		bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+		break;
+
+	case BFA_STATUS_FABRIC_RJT:
+		vport->vport_stats.fdisc_rejects++;
+		bfa_fcs_vport_fdisc_rejected(vport);
+		break;
+
+	default:
+		vport->vport_stats.fdisc_rsp_err++;
+		bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+	}
+}
+
+/**
+ * LOGO response
+ */
+void
+bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg)
+{
+	struct bfa_fcs_vport_s *vport = uarg;
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_OK);
+}
+
+
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index d7576f28c6e9..5edde1a8c04d 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -100,6 +100,8 @@
 #define CTX_OFFSET 			0x10000
 #define MAX_CID_CNT			0x4000
 
+#define BNX2I_570X_PAGE_SIZE_DEFAULT	4096
+
 /* 5709 context registers */
 #define BNX2_MQ_CONFIG2			0x00003d00
 #define BNX2_MQ_CONFIG2_CONT_SZ		(0x7L<<4)
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 41e1b0e7e2ef..5c8d7630c13e 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -2386,7 +2386,7 @@ int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
 		ctx_sz = (config2 & BNX2_MQ_CONFIG2_CONT_SZ) >> 3;
 		if (ctx_sz)
 			reg_off = CTX_OFFSET + MAX_CID_CNT * MB_KERNEL_CTX_SIZE
-				  + PAGE_SIZE *
+				  + BNX2I_570X_PAGE_SIZE_DEFAULT *
 				  (((cid_num - first_l4l5) / ctx_sz) + 256);
 		else
 			reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 9a7ba71f1af4..cafb888c2376 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1243,7 +1243,7 @@ bnx2i_session_create(struct iscsi_endpoint *ep,
 		cmds_max = BNX2I_SQ_WQES_MIN;
 
 	cls_session = iscsi_session_setup(&bnx2i_iscsi_transport, shost,
-					  cmds_max, sizeof(struct bnx2i_cmd),
+					  cmds_max, 0, sizeof(struct bnx2i_cmd),
 					  initial_cmdsn, ISCSI_MAX_TARGET);
 	if (!cls_session)
 		return NULL;
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index c399f485aa7d..2631bddd255e 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -422,7 +422,7 @@ cxgb3i_session_create(struct iscsi_endpoint *ep, u16 cmds_max, u16 qdepth,
 	BUG_ON(hba != iscsi_host_priv(shost));
 
 	cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost,
-					  cmds_max,
+					  cmds_max, 0,
 					  sizeof(struct iscsi_tcp_task) +
 					  sizeof(struct cxgb3i_task_data),
 					  initial_cmdsn, ISCSI_MAX_TARGET);
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 11c89311427e..268189d31d9c 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -500,8 +500,6 @@ static int mode_select_handle_sense(struct scsi_device *sdev,
 	if (!ret)
 		goto done;
 
-	err = SCSI_DH_OK;
-
 	switch (sense_hdr.sense_key) {
 	case NO_SENSE:
 	case ABORTED_COMMAND:
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index b6af63ca980b..7d1aac31ec8d 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -1918,6 +1918,10 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
 		}
 		size = size>>16;
 		size *= 4;
+		if (size > MAX_MESSAGE_SIZE) {
+			rcode = EINVAL;
+			goto cleanup;
+		}
 		/* Copy in the user's I2O command */
 		if (copy_from_user (msg, user_msg, size)) {
 			rcode = -EFAULT;
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index c596ab5f05c3..a0e7e711ff9d 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -1,6 +1,6 @@
 /*
  * HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -41,7 +41,7 @@ MODULE_DESCRIPTION("HighPoint RocketRAID 3xxx/4xxx Controller Driver");
 
 static char driver_name[] = "hptiop";
 static const char driver_name_long[] = "RocketRAID 3xxx/4xxx Controller driver";
-static const char driver_ver[] = "v1.3 (071203)";
+static const char driver_ver[] = "v1.6 (090910)";
 
 static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec);
 static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag,
@@ -115,9 +115,13 @@ static void hptiop_drain_outbound_queue_itl(struct hptiop_hba *hba)
 static int iop_intr_itl(struct hptiop_hba *hba)
 {
 	struct hpt_iopmu_itl __iomem *iop = hba->u.itl.iop;
+	void __iomem *plx = hba->u.itl.plx;
 	u32 status;
 	int ret = 0;
 
+	if (plx && readl(plx + 0x11C5C) & 0xf)
+		writel(1, plx + 0x11C60);
+
 	status = readl(&iop->outbound_intstatus);
 
 	if (status & IOPMU_OUTBOUND_INT_MSG0) {
@@ -460,15 +464,25 @@ static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index)
 
 static int hptiop_map_pci_bar_itl(struct hptiop_hba *hba)
 {
+	struct pci_dev *pcidev = hba->pcidev;
 	hba->u.itl.iop = hptiop_map_pci_bar(hba, 0);
-	if (hba->u.itl.iop)
-		return 0;
-	else
+	if (hba->u.itl.iop == NULL)
 		return -1;
+	if ((pcidev->device & 0xff00) == 0x4400) {
+		hba->u.itl.plx = hba->u.itl.iop;
+		hba->u.itl.iop = hptiop_map_pci_bar(hba, 2);
+		if (hba->u.itl.iop == NULL) {
+			iounmap(hba->u.itl.plx);
+			return -1;
+		}
+	}
+	return 0;
 }
 
 static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba)
 {
+	if (hba->u.itl.plx)
+		iounmap(hba->u.itl.plx);
 	iounmap(hba->u.itl.iop);
 }
 
@@ -1239,22 +1253,23 @@ static struct hptiop_adapter_ops hptiop_mv_ops = {
 static struct pci_device_id hptiop_id_table[] = {
 	{ PCI_VDEVICE(TTI, 0x3220), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3320), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3510), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3511), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3521), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4311), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4400), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops },
diff --git a/drivers/scsi/hptiop.h b/drivers/scsi/hptiop.h
index a0289f219752..0b871c0ae568 100644
--- a/drivers/scsi/hptiop.h
+++ b/drivers/scsi/hptiop.h
@@ -1,6 +1,6 @@
 /*
  * HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -228,6 +228,7 @@ struct hptiop_hba {
 	union {
 		struct {
 			struct hpt_iopmu_itl __iomem *iop;
+			void __iomem *plx;
 		} itl;
 		struct {
 			struct hpt_iopmv_regs *regs;
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 2b1b834a098b..edc49ca49cea 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -811,7 +811,7 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max,
 		goto free_host;
 
 	cls_session = iscsi_session_setup(&iscsi_sw_tcp_transport, shost,
-					  cmds_max,
+					  cmds_max, 0,
 					  sizeof(struct iscsi_tcp_task) +
 					  sizeof(struct iscsi_sw_tcp_hdrbuf),
 					  initial_cmdsn, 0);
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 8dc73c489a17..f1a4246f890c 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2436,7 +2436,7 @@ static void iscsi_host_dec_session_cnt(struct Scsi_Host *shost)
  */
 struct iscsi_cls_session *
 iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost,
-		    uint16_t cmds_max, int cmd_task_size,
+		    uint16_t cmds_max, int dd_size, int cmd_task_size,
 		    uint32_t initial_cmdsn, unsigned int id)
 {
 	struct iscsi_host *ihost = shost_priv(shost);
@@ -2486,7 +2486,8 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost,
 	scsi_cmds = total_cmds - ISCSI_MGMT_CMDS_MAX;
 
 	cls_session = iscsi_alloc_session(shost, iscsit,
-					  sizeof(struct iscsi_session));
+					  sizeof(struct iscsi_session) +
+					  dd_size);
 	if (!cls_session)
 		goto dec_session_count;
 	session = cls_session->dd_data;
@@ -2503,6 +2504,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost,
 	session->max_cmdsn = initial_cmdsn + 1;
 	session->max_r2t = 1;
 	session->tt = iscsit;
+	session->dd_data = cls_session->dd_data + sizeof(*session);
 	mutex_init(&session->eh_mutex);
 	spin_lock_init(&session->lock);
 
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 61d089703806..c88f59f0ce30 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -56,8 +56,6 @@ static char *dif_op_str[] = {
 	"SCSI_PROT_WRITE_INSERT",
 	"SCSI_PROT_READ_PASS",
 	"SCSI_PROT_WRITE_PASS",
-	"SCSI_PROT_READ_CONVERT",
-	"SCSI_PROT_WRITE_CONVERT"
 };
 static void
 lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
@@ -1131,13 +1129,11 @@ lpfc_sc_to_sli_prof(struct scsi_cmnd *sc)
 			ret_prof = LPFC_PROF_A1;
 			break;
 
-		case SCSI_PROT_READ_CONVERT:
-		case SCSI_PROT_WRITE_CONVERT:
+		case SCSI_PROT_READ_PASS:
+		case SCSI_PROT_WRITE_PASS:
 			ret_prof = LPFC_PROF_AST1;
 			break;
 
-		case SCSI_PROT_READ_PASS:
-		case SCSI_PROT_WRITE_PASS:
 		case SCSI_PROT_NORMAL:
 		default:
 			printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
@@ -1157,8 +1153,6 @@ lpfc_sc_to_sli_prof(struct scsi_cmnd *sc)
 			ret_prof = LPFC_PROF_C1;
 			break;
 
-		case SCSI_PROT_READ_CONVERT:
-		case SCSI_PROT_WRITE_CONVERT:
 		case SCSI_PROT_READ_INSERT:
 		case SCSI_PROT_WRITE_STRIP:
 		case SCSI_PROT_NORMAL:
@@ -1209,8 +1203,7 @@ lpfc_get_cmd_dif_parms(struct scsi_cmnd *sc, uint16_t *apptagmask,
 	static int cnt;
 
 	if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
-				op == SCSI_PROT_WRITE_PASS ||
-				op == SCSI_PROT_WRITE_CONVERT)) {
+				op == SCSI_PROT_WRITE_PASS)) {
 
 		cnt++;
 		spt = page_address(sg_page(scsi_prot_sglist(sc))) +
@@ -1501,8 +1494,6 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
 	case SCSI_PROT_WRITE_STRIP:
 	case SCSI_PROT_READ_PASS:
 	case SCSI_PROT_WRITE_PASS:
-	case SCSI_PROT_WRITE_CONVERT:
-	case SCSI_PROT_READ_CONVERT:
 		ret = LPFC_PG_TYPE_DIF_BUF;
 		break;
 	default:
diff --git a/drivers/scsi/mpt2sas/Kconfig b/drivers/scsi/mpt2sas/Kconfig
index 4a86855c23b3..70c4c2467dd8 100644
--- a/drivers/scsi/mpt2sas/Kconfig
+++ b/drivers/scsi/mpt2sas/Kconfig
@@ -2,7 +2,7 @@
 # Kernel configuration file for the MPT2SAS
 #
 # This code is based on drivers/scsi/mpt2sas/Kconfig
-# Copyright (C) 2007-2008  LSI Corporation
+# Copyright (C) 2007-2009  LSI Corporation
 #  (mailto:DL-MPTFusionLinux@lsi.com)
 
 # This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
index 7bb2ece8b2e4..f9f6c0839276 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
  *                  scatter/gather formats.
  *  Creation Date:  June 21, 2006
  *
- *  mpi2.h Version:  02.00.11
+ *  mpi2.h Version:  02.00.12
  *
  *  Version History
  *  ---------------
@@ -45,6 +45,13 @@
  *  10-02-08  02.00.10  Bumped MPI2_HEADER_VERSION_UNIT.
  *                      Moved LUN field defines from mpi2_init.h.
  *  01-19-09  02.00.11  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  05-06-09  02.00.12  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      In all request and reply descriptors, replaced VF_ID
+ *                      field with MSIxIndex field.
+ *                      Removed DevHandle field from
+ *                      MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
+ *                      bytes reserved.
+ *                      Added RAID Accelerator functionality.
  *  --------------------------------------------------------------------------
  */
 
@@ -70,7 +77,7 @@
 #define MPI2_VERSION_02_00                  (0x0200)
 
 /* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x0B)
+#define MPI2_HEADER_VERSION_UNIT            (0x0C)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
@@ -257,7 +264,7 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS
 typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
 {
     U8              RequestFlags;               /* 0x00 */
-    U8              VF_ID;                      /* 0x01 */
+    U8              MSIxIndex;                  /* 0x01 */
     U16             SMID;                       /* 0x02 */
     U16             LMID;                       /* 0x04 */
     U16             DescriptorTypeDependent;    /* 0x06 */
@@ -271,6 +278,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
 #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET             (0x02)
 #define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY           (0x06)
 #define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE            (0x08)
+#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR        (0x0A)
 
 #define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
 
@@ -279,7 +287,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
 typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
 {
     U8              RequestFlags;               /* 0x00 */
-    U8              VF_ID;                      /* 0x01 */
+    U8              MSIxIndex;                  /* 0x01 */
     U16             SMID;                       /* 0x02 */
     U16             LMID;                       /* 0x04 */
     U16             Reserved1;                  /* 0x06 */
@@ -293,7 +301,7 @@ typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
 typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
 {
     U8              RequestFlags;               /* 0x00 */
-    U8              VF_ID;                      /* 0x01 */
+    U8              MSIxIndex;                  /* 0x01 */
     U16             SMID;                       /* 0x02 */
     U16             LMID;                       /* 0x04 */
     U16             DevHandle;                  /* 0x06 */
@@ -306,7 +314,7 @@ typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
 typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
 {
     U8              RequestFlags;               /* 0x00 */
-    U8              VF_ID;                      /* 0x01 */
+    U8              MSIxIndex;                  /* 0x01 */
     U16             SMID;                       /* 0x02 */
     U16             LMID;                       /* 0x04 */
     U16             IoIndex;                    /* 0x06 */
@@ -315,14 +323,29 @@ typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
   Mpi2SCSITargetRequestDescriptor_t,
   MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t;
 
+
+/* RAID Accelerator Request Descriptor */
+typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
+    U8              RequestFlags;               /* 0x00 */
+    U8              MSIxIndex;                  /* 0x01 */
+    U16             SMID;                       /* 0x02 */
+    U16             LMID;                       /* 0x04 */
+    U16             Reserved;                   /* 0x06 */
+} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+  MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+  Mpi2RAIDAcceleratorRequestDescriptor_t,
+  MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t;
+
+
 /* union of Request Descriptors */
 typedef union _MPI2_REQUEST_DESCRIPTOR_UNION
 {
-    MPI2_DEFAULT_REQUEST_DESCRIPTOR         Default;
-    MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR   HighPriority;
-    MPI2_SCSI_IO_REQUEST_DESCRIPTOR         SCSIIO;
-    MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR     SCSITarget;
-    U64                                     Words;
+    MPI2_DEFAULT_REQUEST_DESCRIPTOR             Default;
+    MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR       HighPriority;
+    MPI2_SCSI_IO_REQUEST_DESCRIPTOR             SCSIIO;
+    MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR         SCSITarget;
+    MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR          RAIDAccelerator;
+    U64                                         Words;
 } MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
   Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t;
 
@@ -333,19 +356,20 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION
 typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
 {
     U8              ReplyFlags;                 /* 0x00 */
-    U8              VF_ID;                      /* 0x01 */
+    U8              MSIxIndex;                  /* 0x01 */
     U16             DescriptorTypeDependent1;   /* 0x02 */
     U32             DescriptorTypeDependent2;   /* 0x04 */
 } MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
   Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t;
 
 /* defines for the ReplyFlags field */
-#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK               (0x0F)
-#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS         (0x00)
-#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY           (0x01)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS    (0x02)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER   (0x03)
-#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED                  (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK                   (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS             (0x00)
+#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY               (0x01)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS        (0x02)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER       (0x03)
+#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS    (0x05)
+#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED                      (0x0F)
 
 /* values for marking a reply descriptor as unused */
 #define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK             (0xFFFFFFFF)
@@ -355,7 +379,7 @@ typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
 typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
 {
     U8              ReplyFlags;                 /* 0x00 */
-    U8              VF_ID;                      /* 0x01 */
+    U8              MSIxIndex;                  /* 0x01 */
     U16             SMID;                       /* 0x02 */
     U32             ReplyFrameAddress;          /* 0x04 */
 } MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
@@ -368,10 +392,10 @@ typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
 typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
 {
     U8              ReplyFlags;                 /* 0x00 */
-    U8              VF_ID;                      /* 0x01 */
+    U8              MSIxIndex;                  /* 0x01 */
     U16             SMID;                       /* 0x02 */
     U16             TaskTag;                    /* 0x04 */
-    U16             DevHandle;                  /* 0x06 */
+    U16             Reserved1;                  /* 0x06 */
 } MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
   MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
   Mpi2SCSIIOSuccessReplyDescriptor_t,
@@ -382,7 +406,7 @@ typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
 typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
 {
     U8              ReplyFlags;                 /* 0x00 */
-    U8              VF_ID;                      /* 0x01 */
+    U8              MSIxIndex;                  /* 0x01 */
     U16             SMID;                       /* 0x02 */
     U8              SequenceNumber;             /* 0x04 */
     U8              Reserved1;                  /* 0x05 */
@@ -397,7 +421,7 @@ typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
 typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
 {
     U8              ReplyFlags;                 /* 0x00 */
-    U8              VF_ID;                      /* 0x01 */
+    U8              MSIxIndex;                  /* 0x01 */
     U8              VP_ID;                      /* 0x02 */
     U8              Flags;                      /* 0x03 */
     U16             InitiatorDevHandle;         /* 0x04 */
@@ -411,15 +435,28 @@ typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
 #define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK     (0x3F)
 
 
+/* RAID Accelerator Success Reply Descriptor */
+typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
+    U8              ReplyFlags;                 /* 0x00 */
+    U8              MSIxIndex;                  /* 0x01 */
+    U16             SMID;                       /* 0x02 */
+    U32             Reserved;                   /* 0x04 */
+} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+  MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+  Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
+  MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
+
+
 /* union of Reply Descriptors */
 typedef union _MPI2_REPLY_DESCRIPTORS_UNION
 {
-    MPI2_DEFAULT_REPLY_DESCRIPTOR               Default;
-    MPI2_ADDRESS_REPLY_DESCRIPTOR               AddressReply;
-    MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR       SCSIIOSuccess;
-    MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR  TargetAssistSuccess;
-    MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
-    U64                                         Words;
+    MPI2_DEFAULT_REPLY_DESCRIPTOR                   Default;
+    MPI2_ADDRESS_REPLY_DESCRIPTOR                   AddressReply;
+    MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR           SCSIIOSuccess;
+    MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR      TargetAssistSuccess;
+    MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR     TargetCommandBuffer;
+    MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR  RAIDAcceleratorSuccess;
+    U64                                             Words;
 } MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION,
   Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t;
 
@@ -458,6 +495,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION
 #define MPI2_FUNCTION_DIAG_RELEASE                  (0x1E) /* Diagnostic Release */
 #define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST      (0x24) /* Target Command Buffer Post Base */
 #define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST      (0x25) /* Target Command Buffer Post List */
+#define MPI2_FUNCTION_RAID_ACCELERATOR              (0x2C) /* RAID Accelerator*/
 
 
 
@@ -555,12 +593,17 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION
 
 #define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED          (0x00A0)
 
+/****************************************************************************
+*  RAID Accelerator values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR             (0x00B0)
 
 /****************************************************************************
 *  IOCStatus flag to indicate that log info is available
 ****************************************************************************/
 
-#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE  (0x8000)
+#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE      (0x8000)
 
 /****************************************************************************
 *  IOCLogInfo Types
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index 2f27cf6d6c65..ab47c4679640 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Configuration messages and pages
  *  Creation Date:  November 10, 2006
  *
- *    mpi2_cnfg.h Version:  02.00.10
+ *    mpi2_cnfg.h Version:  02.00.11
  *
  *  Version History
  *  ---------------
@@ -95,6 +95,11 @@
  *                      Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
  *                      Added PortGroups, DmaGroup, and ControlGroup fields to
  *                      SAS Device Page 0.
+ *  05-06-09  02.00.11  Added structures and defines for IO Unit Page 5 and IO
+ *                      Unit Page 6.
+ *                      Added expander reduced functionality data to SAS
+ *                      Expander Page 0.
+ *                      Added SAS PHY Page 2 and SAS PHY Page 3.
  *  --------------------------------------------------------------------------
  */
 
@@ -723,6 +728,65 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3
 #define MPI2_IOUNITPAGE3_GPIO_SETTING_ON                (0x0001)
 
 
+/* IO Unit Page 5 */
+
+/*
+ * Upper layer code (drivers, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength or NumDmaEngines at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
+#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
+    MPI2_CONFIG_PAGE_HEADER Header;				/* 0x00 */
+    U64                     RaidAcceleratorBufferBaseAddress;  /* 0x04 */
+    U64                     RaidAcceleratorBufferSize;         /* 0x0C */
+    U64                     RaidAcceleratorControlBaseAddress; /* 0x14 */
+    U8                      RAControlSize;                     /* 0x1C */
+    U8                      NumDmaEngines;                     /* 0x1D */
+    U8                      RAMinControlSize;                  /* 0x1E */
+    U8                      RAMaxControlSize;                  /* 0x1F */
+    U32                     Reserved1;                         /* 0x20 */
+    U32                     Reserved2;                         /* 0x24 */
+    U32                     Reserved3;                         /* 0x28 */
+    U32                     DmaEngineCapabilities
+				[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */
+} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
+  Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t;
+
+#define MPI2_IOUNITPAGE5_PAGEVERSION                    (0x00)
+
+/* defines for IO Unit Page 5 DmaEngineCapabilities field */
+#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS      (0xFF00)
+#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS     (16)
+
+#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP                   (0x0008)
+#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION      (0x0004)
+#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING                (0x0002)
+#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION             (0x0001)
+
+
+/* IO Unit Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
+    MPI2_CONFIG_PAGE_HEADER Header;                                 /* 0x00 */
+    U16                     Flags;                                  /* 0x04 */
+    U8                      RAHostControlSize;                      /* 0x06 */
+    U8                      Reserved0;                              /* 0x07 */
+    U64                     RaidAcceleratorHostControlBaseAddress;  /* 0x08 */
+    U32                     Reserved1;                              /* 0x10 */
+    U32                     Reserved2;                              /* 0x14 */
+    U32                     Reserved3;                              /* 0x18 */
+} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
+  Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t;
+
+#define MPI2_IOUNITPAGE6_PAGEVERSION                    (0x00)
+
+/* defines for IO Unit Page 6 Flags field */
+#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR  (0x0001)
+
+
 /****************************************************************************
 *   IOC Config Pages
 ****************************************************************************/
@@ -1709,10 +1773,14 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0
     U64                                 ActiveZoneManagerSASAddress;/* 0x2C */
     U16                                 ZoneLockInactivityLimit;    /* 0x34 */
     U16                                 Reserved1;                  /* 0x36 */
+    U8                                  TimeToReducedFunc;          /* 0x38 */
+    U8                                  InitialTimeToReducedFunc;   /* 0x39 */
+    U8                                  MaxReducedFuncTime;         /* 0x3A */
+    U8                                  Reserved2;                  /* 0x3B */
 } MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
   Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t;
 
-#define MPI2_SASEXPANDER0_PAGEVERSION       (0x05)
+#define MPI2_SASEXPANDER0_PAGEVERSION       (0x06)
 
 /* values for SAS Expander Page 0 DiscoveryStatus field */
 #define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED         (0x80000000)
@@ -1737,6 +1805,7 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0
 #define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED                 (0x00000001)
 
 /* values for SAS Expander Page 0 Flags field */
+#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY      (0x2000)
 #define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED                (0x1000)
 #define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES    (0x0800)
 #define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES     (0x0400)
@@ -1944,6 +2013,133 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1
 #define MPI2_SASPHY1_PAGEVERSION            (0x01)
 
 
+/* SAS PHY Page 2 */
+
+typedef struct _MPI2_SASPHY2_PHY_EVENT {
+    U8          PhyEventCode;       /* 0x00 */
+    U8          Reserved1;          /* 0x01 */
+    U16         Reserved2;          /* 0x02 */
+    U32         PhyEventInfo;       /* 0x04 */
+} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT,
+  Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t;
+
+/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
+#define MPI2_SASPHY2_PHY_EVENT_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
+    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
+    U32                                 Reserved1;                  /* 0x08 */
+    U8                                  NumPhyEvents;               /* 0x0C */
+    U8                                  Reserved2;                  /* 0x0D */
+    U16                                 Reserved3;                  /* 0x0E */
+    MPI2_SASPHY2_PHY_EVENT              PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX];
+								/* 0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
+  Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t;
+
+#define MPI2_SASPHY2_PAGEVERSION            (0x00)
+
+
+/* SAS PHY Page 3 */
+
+typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
+    U8          PhyEventCode;       /* 0x00 */
+    U8          Reserved1;          /* 0x01 */
+    U16         Reserved2;          /* 0x02 */
+    U8          CounterType;        /* 0x04 */
+    U8          ThresholdWindow;    /* 0x05 */
+    U8          TimeUnits;          /* 0x06 */
+    U8          Reserved3;          /* 0x07 */
+    U32         EventThreshold;     /* 0x08 */
+    U16         ThresholdFlags;     /* 0x0C */
+    U16         Reserved4;          /* 0x0E */
+} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
+  Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t;
+
+/* values for PhyEventCode field */
+#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT                    (0x00)
+#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD               (0x01)
+#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR     (0x02)
+#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC             (0x03)
+#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM           (0x04)
+#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW     (0x05)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR                    (0x06)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR         (0x20)
+#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT           (0x21)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT           (0x22)
+#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT           (0x23)
+#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT           (0x24)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON   (0x25)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON   (0x26)
+#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK                    (0x27)
+#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK                    (0x28)
+#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT               (0x29)
+#define MPI2_SASPHY3_EVENT_CODE_CONNECTION                  (0x2A)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED      (0x2B)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME        (0x2C)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME          (0x2D)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME           (0x2E)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES               (0x40)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES               (0x41)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES         (0x42)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES         (0x43)
+#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED           (0x44)
+#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED           (0x45)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES              (0x50)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES              (0x51)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW               (0x52)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES               (0x60)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES               (0x61)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES         (0x63)
+#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT             (0xD0)
+#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE    (0xD1)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP                      (0xD2)
+
+/* values for the CounterType field */
+#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING                  (0x00)
+#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING                (0x01)
+#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE                (0x02)
+
+/* values for the TimeUnits field */
+#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS             (0x00)
+#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS            (0x01)
+#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND               (0x02)
+#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS             (0x03)
+
+/* values for the ThresholdFlags field */
+#define MPI2_SASPHY3_TFLAGS_PHY_RESET                       (0x0002)
+#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY                    (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
+#define MPI2_SASPHY3_PHY_EVENT_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
+    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
+    U32                                 Reserved1;                  /* 0x08 */
+    U8                                  NumPhyEvents;               /* 0x0C */
+    U8                                  Reserved2;                  /* 0x0D */
+    U16                                 Reserved3;                  /* 0x0E */
+    MPI2_SASPHY3_PHY_EVENT_CONFIG       PhyEventConfig
+					[MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
+  Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t;
+
+#define MPI2_SASPHY3_PAGEVERSION            (0x00)
+
+
 /****************************************************************************
 *   SAS Port Config Pages
 ****************************************************************************/
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
new file mode 100644
index 000000000000..65fcaa31cb30
--- /dev/null
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
@@ -0,0 +1,334 @@
+ ==============================
+ Fusion-MPT MPI 2.0 Header File Change History
+ ==============================
+
+ Copyright (c) 2000-2009 LSI Corporation.
+
+ ---------------------------------------
+ Header Set Release Version:    02.00.12
+ Header Set Release Date:       05-06-09
+ ---------------------------------------
+
+ Filename               Current version     Prior version
+ ----------             ---------------     -------------
+ mpi2.h                 02.00.12            02.00.11
+ mpi2_cnfg.h            02.00.11            02.00.10
+ mpi2_init.h            02.00.07            02.00.06
+ mpi2_ioc.h             02.00.11            02.00.10
+ mpi2_raid.h            02.00.03            02.00.03
+ mpi2_sas.h             02.00.02            02.00.02
+ mpi2_targ.h            02.00.03            02.00.03
+ mpi2_tool.h            02.00.03            02.00.02
+ mpi2_type.h            02.00.00            02.00.00
+ mpi2_ra.h              02.00.00
+ mpi2_history.txt       02.00.11            02.00.12
+
+
+ *  Date      Version   Description
+ *  --------  --------  ------------------------------------------------------
+
+mpi2.h
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  06-04-07  02.00.01  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  06-26-07  02.00.02  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  08-31-07  02.00.03  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      Moved ReplyPostHostIndex register to offset 0x6C of the
+ *                      MPI2_SYSTEM_INTERFACE_REGS and modified the define for
+ *                      MPI2_REPLY_POST_HOST_INDEX_OFFSET.
+ *                      Added union of request descriptors.
+ *                      Added union of reply descriptors.
+ *  10-31-07  02.00.04  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      Added define for MPI2_VERSION_02_00.
+ *                      Fixed the size of the FunctionDependent5 field in the
+ *                      MPI2_DEFAULT_REPLY structure.
+ *  12-18-07  02.00.05  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      Removed the MPI-defined Fault Codes and extended the
+ *                      product specific codes up to 0xEFFF.
+ *                      Added a sixth key value for the WriteSequence register
+ *                      and changed the flush value to 0x0.
+ *                      Added message function codes for Diagnostic Buffer Post
+ *                      and Diagnsotic Release.
+ *                      New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
+ *                      Moved MPI2_VERSION_UNION from mpi2_ioc.h.
+ *  02-29-08  02.00.06  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  03-03-08  02.00.07  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  05-21-08  02.00.08  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      Added #defines for marking a reply descriptor as unused.
+ *  06-27-08  02.00.09  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  10-02-08  02.00.10  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      Moved LUN field defines from mpi2_init.h.
+ *  01-19-09  02.00.11  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  05-06-09  02.00.12  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      In all request and reply descriptors, replaced VF_ID
+ *                      field with MSIxIndex field.
+ *                      Removed DevHandle field from
+ *                      MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
+ *                      bytes reserved.
+ *                      Added RAID Accelerator functionality.
+ *  --------------------------------------------------------------------------
+
+mpi2_cnfg.h
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  06-04-07  02.00.01  Added defines for SAS IO Unit Page 2 PhyFlags.
+ *                      Added Manufacturing Page 11.
+ *                      Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
+ *                      define.
+ *  06-26-07  02.00.02  Adding generic structure for product-specific
+ *                      Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
+ *                      Rework of BIOS Page 2 configuration page.
+ *                      Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
+ *                      forms.
+ *                      Added configuration pages IOC Page 8 and Driver
+ *                      Persistent Mapping Page 0.
+ *  08-31-07  02.00.03  Modified configuration pages dealing with Integrated
+ *                      RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
+ *                      RAID Physical Disk Pages 0 and 1, RAID Configuration
+ *                      Page 0).
+ *                      Added new value for AccessStatus field of SAS Device
+ *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
+ *  10-31-07  02.00.04  Added missing SEPDevHandle field to
+ *                      MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ *  12-18-07  02.00.05  Modified IO Unit Page 0 to use 32-bit version fields for
+ *                      NVDATA.
+ *                      Modified IOC Page 7 to use masks and added field for
+ *                      SASBroadcastPrimitiveMasks.
+ *                      Added MPI2_CONFIG_PAGE_BIOS_4.
+ *                      Added MPI2_CONFIG_PAGE_LOG_0.
+ *  02-29-08  02.00.06  Modified various names to make them 32-character unique.
+ *                      Added SAS Device IDs.
+ *                      Updated Integrated RAID configuration pages including
+ *                      Manufacturing Page 4, IOC Page 6, and RAID Configuration
+ *                      Page 0.
+ *  05-21-08  02.00.07  Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
+ *                      Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
+ *                      Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
+ *                      Added missing MaxNumRoutedSasAddresses field to
+ *                      MPI2_CONFIG_PAGE_EXPANDER_0.
+ *                      Added SAS Port Page 0.
+ *                      Modified structure layout for
+ *                      MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
+ *  06-27-08  02.00.08  Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
+ *                      MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
+ *  10-02-08  02.00.09  Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
+ *                      to 0x000000FF.
+ *                      Added two new values for the Physical Disk Coercion Size
+ *                      bits in the Flags field of Manufacturing Page 4.
+ *                      Added product-specific Manufacturing pages 16 to 31.
+ *                      Modified Flags bits for controlling write cache on SATA
+ *                      drives in IO Unit Page 1.
+ *                      Added new bit to AdditionalControlFlags of SAS IO Unit
+ *                      Page 1 to control Invalid Topology Correction.
+ *                      Added SupportedPhysDisks field to RAID Volume Page 1 and
+ *                      added related defines.
+ *                      Added additional defines for RAID Volume Page 0
+ *                      VolumeStatusFlags field.
+ *                      Modified meaning of RAID Volume Page 0 VolumeSettings
+ *                      define for auto-configure of hot-swap drives.
+ *                      Added PhysDiskAttributes field (and related defines) to
+ *                      RAID Physical Disk Page 0.
+ *                      Added MPI2_SAS_PHYINFO_PHY_VACANT define.
+ *                      Added three new DiscoveryStatus bits for SAS IO Unit
+ *                      Page 0 and SAS Expander Page 0.
+ *                      Removed multiplexing information from SAS IO Unit pages.
+ *                      Added BootDeviceWaitTime field to SAS IO Unit Page 4.
+ *                      Removed Zone Address Resolved bit from PhyInfo and from
+ *                      Expander Page 0 Flags field.
+ *                      Added two new AccessStatus values to SAS Device Page 0
+ *                      for indicating routing problems. Added 3 reserved words
+ *                      to this page.
+ *  01-19-09  02.00.10  Fixed defines for GPIOVal field of IO Unit Page 3.
+ *                      Inserted missing reserved field into structure for IOC
+ *                      Page 6.
+ *                      Added more pending task bits to RAID Volume Page 0
+ *                      VolumeStatusFlags defines.
+ *                      Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
+ *                      Added a new DiscoveryStatus bit for SAS IO Unit Page 0
+ *                      and SAS Expander Page 0 to flag a downstream initiator
+ *                      when in simplified routing mode.
+ *                      Removed SATA Init Failure defines for DiscoveryStatus
+ *                      fields of SAS IO Unit Page 0 and SAS Expander Page 0.
+ *                      Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
+ *                      Added PortGroups, DmaGroup, and ControlGroup fields to
+ *                      SAS Device Page 0.
+ *  05-06-09  02.00.11  Added structures and defines for IO Unit Page 5 and IO
+ *                      Unit Page 6.
+ *                      Added expander reduced functionality data to SAS
+ *                      Expander Page 0.
+ *                      Added SAS PHY Page 2 and SAS PHY Page 3.
+ *  --------------------------------------------------------------------------
+
+mpi2_init.h
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  10-31-07  02.00.01  Fixed name for pMpi2SCSITaskManagementRequest_t.
+ *  12-18-07  02.00.02  Modified Task Management Target Reset Method defines.
+ *  02-29-08  02.00.03  Added Query Task Set and Query Unit Attention.
+ *  03-03-08  02.00.04  Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
+ *  05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
+ *  10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
+ *                      Control field Task Attribute flags.
+ *                      Moved LUN field defines to mpi2.h becasue they are
+ *                      common to many structures.
+ *  05-06-09  02.00.07  Changed task management type of Query Unit Attention to
+ *                      Query Asynchronous Event.
+ *                      Defined two new bits in the SlotStatus field of the SCSI
+ *                      Enclosure Processor Request and Reply.
+ *  --------------------------------------------------------------------------
+
+mpi2_ioc.h
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  06-04-07  02.00.01  In IOCFacts Reply structure, renamed MaxDevices to
+ *                      MaxTargets.
+ *                      Added TotalImageSize field to FWDownload Request.
+ *                      Added reserved words to FWUpload Request.
+ *  06-26-07  02.00.02  Added IR Configuration Change List Event.
+ *  08-31-07  02.00.03  Removed SystemReplyQueueDepth field from the IOCInit
+ *                      request and replaced it with
+ *                      ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
+ *                      Replaced the MinReplyQueueDepth field of the IOCFacts
+ *                      reply with MaxReplyDescriptorPostQueueDepth.
+ *                      Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
+ *                      depth for the Reply Descriptor Post Queue.
+ *                      Added SASAddress field to Initiator Device Table
+ *                      Overflow Event data.
+ *  10-31-07  02.00.04  Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
+ *                      for SAS Initiator Device Status Change Event data.
+ *                      Modified Reason Code defines for SAS Topology Change
+ *                      List Event data, including adding a bit for PHY Vacant
+ *                      status, and adding a mask for the Reason Code.
+ *                      Added define for
+ *                      MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
+ *                      Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
+ *  12-18-07  02.00.05  Added Boot Status defines for the IOCExceptions field of
+ *                      the IOCFacts Reply.
+ *                      Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ *                      Moved MPI2_VERSION_UNION to mpi2.h.
+ *                      Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
+ *                      instead of enables, and added SASBroadcastPrimitiveMasks
+ *                      field.
+ *                      Added Log Entry Added Event and related structure.
+ *  02-29-08  02.00.06  Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
+ *                      Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
+ *                      Added MaxVolumes and MaxPersistentEntries fields to
+ *                      IOCFacts reply.
+ *                      Added ProtocalFlags and IOCCapabilities fields to
+ *                      MPI2_FW_IMAGE_HEADER.
+ *                      Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
+ *  03-03-08  02.00.07  Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
+ *                      a U16 (from a U32).
+ *                      Removed extra 's' from EventMasks name.
+ *  06-27-08  02.00.08  Fixed an offset in a comment.
+ *  10-02-08  02.00.09  Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
+ *                      Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
+ *                      renamed MinReplyFrameSize to ReplyFrameSize.
+ *                      Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
+ *                      Added two new RAIDOperation values for Integrated RAID
+ *                      Operations Status Event data.
+ *                      Added four new IR Configuration Change List Event data
+ *                      ReasonCode values.
+ *                      Added two new ReasonCode defines for SAS Device Status
+ *                      Change Event data.
+ *                      Added three new DiscoveryStatus bits for the SAS
+ *                      Discovery event data.
+ *                      Added Multiplexing Status Change bit to the PhyStatus
+ *                      field of the SAS Topology Change List event data.
+ *                      Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
+ *                      BootFlags are now product-specific.
+ *                      Added defines for the indivdual signature bytes
+ *                      for MPI2_INIT_IMAGE_FOOTER.
+ *  01-19-09  02.00.10  Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
+ *                      Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
+ *                      define.
+ *                      Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
+ *                      define.
+ *                      Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
+ *  05-06-09  02.00.11  Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
+ *                      Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
+ *                      Added two new reason codes for SAS Device Status Change
+ *                      Event.
+ *                      Added new event: SAS PHY Counter.
+ *  --------------------------------------------------------------------------
+
+mpi2_raid.h
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  08-31-07  02.00.01  Modifications to RAID Action request and reply,
+ *                      including the Actions and ActionData.
+ *  02-29-08  02.00.02  Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
+ *  05-21-08  02.00.03  Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
+ *                      the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
+ *                      can be sized by the build environment.
+ *  --------------------------------------------------------------------------
+
+mpi2_sas.h
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  06-26-07  02.00.01  Added Clear All Persistent Operation to SAS IO Unit
+ *                      Control Request.
+ *  10-02-08  02.00.02  Added Set IOC Parameter Operation to SAS IO Unit Control
+ *                      Request.
+ *  --------------------------------------------------------------------------
+
+mpi2_targ.h
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  08-31-07  02.00.01  Added Command Buffer Data Location Address Space bits to
+ *                      BufferPostFlags field of CommandBufferPostBase Request.
+ *  02-29-08  02.00.02  Modified various names to make them 32-character unique.
+ *  10-02-08  02.00.03  Removed NextCmdBufferOffset from
+ *                      MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST.
+ *                      Target Status Send Request only takes a single SGE for
+ *                      response data.
+ *  --------------------------------------------------------------------------
+
+mpi2_tool.h
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  12-18-07  02.00.01  Added Diagnostic Buffer Post and Diagnostic Release
+ *                      structures and defines.
+ *  02-29-08  02.00.02  Modified various names to make them 32-character unique.
+ *  05-06-09  02.00.03  Added ISTWI Read Write Tool and Diagnostic CLI Tool.
+ *  --------------------------------------------------------------------------
+
+mpi2_type.h
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  --------------------------------------------------------------------------
+
+mpi2_ra.h
+ *  05-06-09  02.00.00  Initial version.
+ *  --------------------------------------------------------------------------
+
+mpi2_history.txt         Parts list history
+
+Filename     02.00.12
+----------   --------
+mpi2.h       02.00.12
+mpi2_cnfg.h  02.00.11
+mpi2_init.h  02.00.07
+mpi2_ioc.h   02.00.11
+mpi2_raid.h  02.00.03
+mpi2_sas.h   02.00.02
+mpi2_targ.h  02.00.03
+mpi2_tool.h  02.00.03
+mpi2_type.h  02.00.00
+mpi2_ra.h    02.00.00
+
+Filename     02.00.11  02.00.10  02.00.09  02.00.08  02.00.07  02.00.06
+----------   --------  --------  --------  --------  --------  --------
+mpi2.h       02.00.11  02.00.10  02.00.09  02.00.08  02.00.07  02.00.06
+mpi2_cnfg.h  02.00.10  02.00.09  02.00.08  02.00.07  02.00.06  02.00.06
+mpi2_init.h  02.00.06  02.00.06  02.00.05  02.00.05  02.00.04  02.00.03
+mpi2_ioc.h   02.00.10  02.00.09  02.00.08  02.00.07  02.00.07  02.00.06
+mpi2_raid.h  02.00.03  02.00.03  02.00.03  02.00.03  02.00.02  02.00.02
+mpi2_sas.h   02.00.02  02.00.02  02.00.01  02.00.01  02.00.01  02.00.01
+mpi2_targ.h  02.00.03  02.00.03  02.00.02  02.00.02  02.00.02  02.00.02
+mpi2_tool.h  02.00.02  02.00.02  02.00.02  02.00.02  02.00.02  02.00.02
+mpi2_type.h  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00
+
+Filename     02.00.05  02.00.04  02.00.03  02.00.02  02.00.01  02.00.00
+----------   --------  --------  --------  --------  --------  --------
+mpi2.h       02.00.05  02.00.04  02.00.03  02.00.02  02.00.01  02.00.00
+mpi2_cnfg.h  02.00.05  02.00.04  02.00.03  02.00.02  02.00.01  02.00.00
+mpi2_init.h  02.00.02  02.00.01  02.00.00  02.00.00  02.00.00  02.00.00
+mpi2_ioc.h   02.00.05  02.00.04  02.00.03  02.00.02  02.00.01  02.00.00
+mpi2_raid.h  02.00.01  02.00.01  02.00.01  02.00.00  02.00.00  02.00.00
+mpi2_sas.h   02.00.01  02.00.01  02.00.01  02.00.01  02.00.00  02.00.00
+mpi2_targ.h  02.00.01  02.00.01  02.00.01  02.00.00  02.00.00  02.00.00
+mpi2_tool.h  02.00.01  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00
+mpi2_type.h  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00
+
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
index f1115f0f0eb2..563e56d2e945 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2008 LSI Corporation.
+ *  Copyright (c) 2000-2009 LSI Corporation.
  *
  *
  *           Name:  mpi2_init.h
  *          Title:  MPI SCSI initiator mode messages and structures
  *  Creation Date:  June 23, 2006
  *
- *    mpi2_init.h Version:  02.00.06
+ *    mpi2_init.h Version:  02.00.07
  *
  *  Version History
  *  ---------------
@@ -23,6 +23,10 @@
  *                      Control field Task Attribute flags.
  *                      Moved LUN field defines to mpi2.h becasue they are
  *                      common to many structures.
+ *  05-06-09  02.00.07  Changed task management type of Query Unit Attention to
+ *                      Query Asynchronous Event.
+ *                      Defined two new bits in the SlotStatus field of the SCSI
+ *                      Enclosure Processor Request and Reply.
  *  --------------------------------------------------------------------------
  */
 
@@ -289,7 +293,11 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST
 #define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK           (0x07)
 #define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA              (0x08)
 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET         (0x09)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION   (0x0A)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT      (0x0A)
+
+/* obsolete TaskType name */
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION	\
+	(MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
 
 /* MsgFlags bits */
 
@@ -375,6 +383,8 @@ typedef struct _MPI2_SEP_REQUEST
 #define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE               (0x00000100)
 #define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED            (0x00000080)
 #define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT         (0x00000040)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY       (0x00000010)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY         (0x00000008)
 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING          (0x00000004)
 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY              (0x00000002)
 #define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR                (0x00000001)
@@ -410,6 +420,8 @@ typedef struct _MPI2_SEP_REPLY
 #define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE             (0x00000100)
 #define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED          (0x00000080)
 #define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT       (0x00000040)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY     (0x00000010)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY       (0x00000008)
 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING        (0x00000004)
 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY            (0x00000002)
 #define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR              (0x00000001)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
index 8c5d81870c03..c294128bdeb4 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
@@ -6,7 +6,7 @@
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  October 11, 2006
  *
- *  mpi2_ioc.h Version:  02.00.10
+ *  mpi2_ioc.h Version:  02.00.11
  *
  *  Version History
  *  ---------------
@@ -79,6 +79,11 @@
  *                      Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
  *                      define.
  *                      Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
+ *  05-06-09  02.00.11  Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
+ *                      Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
+ *                      Added two new reason codes for SAS Device Status Change
+ *                      Event.
+ *                      Added new event: SAS PHY Counter.
  *  --------------------------------------------------------------------------
  */
 
@@ -261,6 +266,8 @@ typedef struct _MPI2_IOC_FACTS_REPLY
 /* ProductID field uses MPI2_FW_HEADER_PID_ */
 
 /* IOCCapabilities */
+#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX            (0x00008000)
+#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR       (0x00004000)
 #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY           (0x00002000)
 #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID        (0x00001000)
 #define MPI2_IOCFACTS_CAPABILITY_TLR                    (0x00000800)
@@ -440,6 +447,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY
 #define MPI2_EVENT_IR_PHYSICAL_DISK                 (0x001F)
 #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST     (0x0020)
 #define MPI2_EVENT_LOG_ENTRY_ADDED                  (0x0021)
+#define MPI2_EVENT_SAS_PHY_COUNTER                  (0x0022)
 
 
 /* Log Entry Added Event data */
@@ -502,17 +510,19 @@ typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
   MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t;
 
 /* SAS Device Status Change Event data ReasonCode values */
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA               (0x05)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED              (0x07)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET    (0x08)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL      (0x09)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL  (0x0A)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL  (0x0B)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL      (0x0C)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION       (0x0D)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET   (0x0E)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL  (0x0F)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE        (0x10)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA                           (0x05)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED                          (0x07)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET                (0x08)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL                  (0x09)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL              (0x0A)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL              (0x0B)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL                  (0x0C)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION                   (0x0D)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET               (0x0E)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL              (0x0F)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE                    (0x10)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY       (0x11)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY   (0x12)
 
 
 /* Integrated RAID Operation Status Event data */
@@ -822,6 +832,37 @@ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE
 #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING       (0x02)
 
 
+/* SAS PHY Counter Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
+    U64         TimeStamp;          /* 0x00 */
+    U32         Reserved1;          /* 0x08 */
+    U8          PhyEventCode;       /* 0x0C */
+    U8          PhyNum;             /* 0x0D */
+    U16         Reserved2;          /* 0x0E */
+    U32         PhyEventInfo;       /* 0x10 */
+    U8          CounterType;        /* 0x14 */
+    U8          ThresholdWindow;    /* 0x15 */
+    U8          TimeUnits;          /* 0x16 */
+    U8          Reserved3;          /* 0x17 */
+    U32         EventThreshold;     /* 0x18 */
+    U16         ThresholdFlags;     /* 0x1C */
+    U16         Reserved4;          /* 0x1E */
+} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+  Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t;
+
+/* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the
+ * PhyEventCode field
+ * use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the
+ * CounterType field
+ * use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the
+ * TimeUnits field
+ * use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the
+ * ThresholdFlags field
+ * */
+
+
 /****************************************************************************
 *  EventAck message
 ****************************************************************************/
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
index 2ff4e936bd39..007e950f7bfa 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2008 LSI Corporation.
+ *  Copyright (c) 2000-2009 LSI Corporation.
  *
  *
  *           Name:  mpi2_tool.h
  *          Title:  MPI diagnostic tool structures and definitions
  *  Creation Date:  March 26, 2007
  *
- *    mpi2_tool.h Version:  02.00.02
+ *    mpi2_tool.h Version:  02.00.03
  *
  *  Version History
  *  ---------------
@@ -17,6 +17,7 @@
  *  12-18-07  02.00.01  Added Diagnostic Buffer Post and Diagnostic Release
  *                      structures and defines.
  *  02-29-08  02.00.02  Modified various names to make them 32-character unique.
+ *  05-06-09  02.00.03  Added ISTWI Read Write Tool and Diagnostic CLI Tool.
  *  --------------------------------------------------------------------------
  */
 
@@ -32,7 +33,10 @@
 /* defines for the Tools */
 #define MPI2_TOOLBOX_CLEAN_TOOL                     (0x00)
 #define MPI2_TOOLBOX_MEMORY_MOVE_TOOL               (0x01)
+#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL          (0x03)
 #define MPI2_TOOLBOX_BEACON_TOOL                    (0x05)
+#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL            (0x06)
+
 
 /****************************************************************************
 *  Toolbox reply
@@ -112,6 +116,77 @@ typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST
 
 
 /****************************************************************************
+*  Toolbox ISTWI Read Write Tool
+****************************************************************************/
+
+/* Toolbox ISTWI Read Write Tool request message */
+typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
+    U8                      Tool;                       /* 0x00 */
+    U8                      Reserved1;                  /* 0x01 */
+    U8                      ChainOffset;                /* 0x02 */
+    U8                      Function;                   /* 0x03 */
+    U16                     Reserved2;                  /* 0x04 */
+    U8                      Reserved3;                  /* 0x06 */
+    U8                      MsgFlags;                   /* 0x07 */
+    U8                      VP_ID;                      /* 0x08 */
+    U8                      VF_ID;                      /* 0x09 */
+    U16                     Reserved4;                  /* 0x0A */
+    U32                     Reserved5;                  /* 0x0C */
+    U32                     Reserved6;                  /* 0x10 */
+    U8                      DevIndex;                   /* 0x14 */
+    U8                      Action;                     /* 0x15 */
+    U8                      SGLFlags;                   /* 0x16 */
+    U8                      Reserved7;                  /* 0x17 */
+    U16                     TxDataLength;               /* 0x18 */
+    U16                     RxDataLength;               /* 0x1A */
+    U32                     Reserved8;                  /* 0x1C */
+    U32                     Reserved9;                  /* 0x20 */
+    U32                     Reserved10;                 /* 0x24 */
+    U32                     Reserved11;                 /* 0x28 */
+    U32                     Reserved12;                 /* 0x2C */
+    MPI2_SGE_SIMPLE_UNION   SGL;                        /* 0x30 */
+} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+  MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+  Mpi2ToolboxIstwiReadWriteRequest_t,
+  MPI2_POINTER pMpi2ToolboxIstwiReadWriteRequest_t;
+
+/* values for the Action field */
+#define MPI2_TOOL_ISTWI_ACTION_READ_DATA            (0x01)
+#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA           (0x02)
+#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE             (0x03)
+#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS          (0x10)
+#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS          (0x11)
+#define MPI2_TOOL_ISTWI_ACTION_RESET                (0x12)
+
+/* values for SGLFlags field are in the SGL section of mpi2.h */
+
+
+/* Toolbox ISTWI Read Write Tool reply message */
+typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
+    U8                      Tool;                       /* 0x00 */
+    U8                      Reserved1;                  /* 0x01 */
+    U8                      MsgLength;                  /* 0x02 */
+    U8                      Function;                   /* 0x03 */
+    U16                     Reserved2;                  /* 0x04 */
+    U8                      Reserved3;                  /* 0x06 */
+    U8                      MsgFlags;                   /* 0x07 */
+    U8                      VP_ID;                      /* 0x08 */
+    U8                      VF_ID;                      /* 0x09 */
+    U16                     Reserved4;                  /* 0x0A */
+    U16                     Reserved5;                  /* 0x0C */
+    U16                     IOCStatus;                  /* 0x0E */
+    U32                     IOCLogInfo;                 /* 0x10 */
+    U8                      DevIndex;                   /* 0x14 */
+    U8                      Action;                     /* 0x15 */
+    U8                      IstwiStatus;                /* 0x16 */
+    U8                      Reserved6;                  /* 0x17 */
+    U16                     TxDataCount;                /* 0x18 */
+    U16                     RxDataCount;                /* 0x1A */
+} MPI2_TOOLBOX_ISTWI_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_REPLY,
+  Mpi2ToolboxIstwiReply_t, MPI2_POINTER pMpi2ToolboxIstwiReply_t;
+
+
+/****************************************************************************
 *  Toolbox Beacon Tool request
 ****************************************************************************/
 
@@ -139,6 +214,61 @@ typedef struct _MPI2_TOOLBOX_BEACON_REQUEST
 #define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON        (0x01)
 
 
+/****************************************************************************
+*  Toolbox Diagnostic CLI Tool
+****************************************************************************/
+
+#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH    (0x5C)
+
+/* Toolbox Diagnostic CLI Tool request message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
+    U8                      Tool;                       /* 0x00 */
+    U8                      Reserved1;                  /* 0x01 */
+    U8                      ChainOffset;                /* 0x02 */
+    U8                      Function;                   /* 0x03 */
+    U16                     Reserved2;                  /* 0x04 */
+    U8                      Reserved3;                  /* 0x06 */
+    U8                      MsgFlags;                   /* 0x07 */
+    U8                      VP_ID;                      /* 0x08 */
+    U8                      VF_ID;                      /* 0x09 */
+    U16                     Reserved4;                  /* 0x0A */
+    U8                      SGLFlags;                   /* 0x0C */
+    U8                      Reserved5;                  /* 0x0D */
+    U16                     Reserved6;                  /* 0x0E */
+    U32                     DataLength;                 /* 0x10 */
+    U8                      DiagnosticCliCommand
+		[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];     /* 0x14 */
+    MPI2_SGE_SIMPLE_UNION   SGL;                        /* 0x70 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+  MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+  Mpi2ToolboxDiagnosticCliRequest_t,
+  MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t;
+
+/* values for SGLFlags field are in the SGL section of mpi2.h */
+
+
+/* Toolbox Diagnostic CLI Tool reply message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY {
+    U8                      Tool;                       /* 0x00 */
+    U8                      Reserved1;                  /* 0x01 */
+    U8                      MsgLength;                  /* 0x02 */
+    U8                      Function;                   /* 0x03 */
+    U16                     Reserved2;                  /* 0x04 */
+    U8                      Reserved3;                  /* 0x06 */
+    U8                      MsgFlags;                   /* 0x07 */
+    U8                      VP_ID;                      /* 0x08 */
+    U8                      VF_ID;                      /* 0x09 */
+    U16                     Reserved4;                  /* 0x0A */
+    U16                     Reserved5;                  /* 0x0C */
+    U16                     IOCStatus;                  /* 0x0E */
+    U32                     IOCLogInfo;                 /* 0x10 */
+    U32                     ReturnedDataLength;         /* 0x14 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
+  MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
+  Mpi2ToolboxDiagnosticCliReply_t,
+  MPI2_POINTER pMpi2ToolboxDiagnosticCliReply_t;
+
+
 /*****************************************************************************
 *
 *       Diagnostic Buffer Messages
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index d95d2f274cb3..670241efa4b5 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -3,7 +3,7 @@
  * for access to MPT (Message Passing Technology) firmware.
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2008  LSI Corporation
+ * Copyright (C) 2007-2009  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -63,7 +63,7 @@
 static MPT_CALLBACK	mpt_callbacks[MPT_MAX_CALLBACKS];
 
 #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
-#define MPT2SAS_MAX_REQUEST_QUEUE 500 /* maximum controller queue depth */
+#define MPT2SAS_MAX_REQUEST_QUEUE 600 /* maximum controller queue depth */
 
 static int max_queue_depth = -1;
 module_param(max_queue_depth, int, 0);
@@ -543,13 +543,13 @@ mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code)
  * _base_display_reply_info -
  * @ioc: pointer to scsi command object
  * @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  *
  * Return nothing.
  */
 static void
-_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
+_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
     u32 reply)
 {
 	MPI2DefaultReply_t *mpi_reply;
@@ -572,22 +572,24 @@ _base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
  * mpt2sas_base_done - base internal command completion routine
  * @ioc: pointer to scsi command object
  * @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  *
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
  */
-void
-mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+u8
+mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+    u32 reply)
 {
 	MPI2DefaultReply_t *mpi_reply;
 
 	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
-		return;
+		return 1;
 
 	if (ioc->base_cmds.status == MPT2_CMD_NOT_USED)
-		return;
+		return 1;
 
 	ioc->base_cmds.status |= MPT2_CMD_COMPLETE;
 	if (mpi_reply) {
@@ -596,18 +598,20 @@ mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 	}
 	ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
 	complete(&ioc->base_cmds.done);
+	return 1;
 }
 
 /**
  * _base_async_event - main callback handler for firmware asyn events
  * @ioc: pointer to scsi command object
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  *
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
  */
-static void
-_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
+static u8
+_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
 {
 	Mpi2EventNotificationReply_t *mpi_reply;
 	Mpi2EventAckRequest_t *ack_request;
@@ -615,9 +619,9 @@ _base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
 
 	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	if (!mpi_reply)
-		return;
+		return 1;
 	if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
-		return;
+		return 1;
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	_base_display_event_data(ioc, mpi_reply);
 #endif
@@ -635,16 +639,47 @@ _base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
 	ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
 	ack_request->Event = mpi_reply->Event;
 	ack_request->EventContext = mpi_reply->EventContext;
-	ack_request->VF_ID = VF_ID;
-	mpt2sas_base_put_smid_default(ioc, smid, VF_ID);
+	ack_request->VF_ID = 0;  /* TODO */
+	ack_request->VP_ID = 0;
+	mpt2sas_base_put_smid_default(ioc, smid);
 
  out:
 
 	/* scsih callback handler */
-	mpt2sas_scsih_event_callback(ioc, VF_ID, reply);
+	mpt2sas_scsih_event_callback(ioc, msix_index, reply);
 
 	/* ctl callback handler */
-	mpt2sas_ctl_event_callback(ioc, VF_ID, reply);
+	mpt2sas_ctl_event_callback(ioc, msix_index, reply);
+
+	return 1;
+}
+
+/**
+ * _base_get_cb_idx - obtain the callback index
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return callback index.
+ */
+static u8
+_base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+	int i;
+	u8 cb_idx = 0xFF;
+
+	if (smid >= ioc->hi_priority_smid) {
+		if (smid < ioc->internal_smid) {
+			i = smid - ioc->hi_priority_smid;
+			cb_idx = ioc->hpr_lookup[i].cb_idx;
+		} else {
+			i = smid - ioc->internal_smid;
+			cb_idx = ioc->internal_lookup[i].cb_idx;
+		}
+	} else {
+		i = smid - 1;
+		cb_idx = ioc->scsi_lookup[i].cb_idx;
+	}
+	return cb_idx;
 }
 
 /**
@@ -680,7 +715,6 @@ _base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc)
 {
 	u32 him_register;
 
-	writel(0, &ioc->chip->HostInterruptStatus);
 	him_register = readl(&ioc->chip->HostInterruptMask);
 	him_register &= ~MPI2_HIM_RIM;
 	writel(him_register, &ioc->chip->HostInterruptMask);
@@ -712,9 +746,10 @@ _base_interrupt(int irq, void *bus_id)
 	u16 smid;
 	u8 cb_idx;
 	u32 reply;
-	u8 VF_ID;
+	u8 msix_index;
 	struct MPT2SAS_ADAPTER *ioc = bus_id;
 	Mpi2ReplyDescriptorsUnion_t *rpf;
+	u8 rc;
 
 	if (ioc->mask_interrupts)
 		return IRQ_NONE;
@@ -733,7 +768,7 @@ _base_interrupt(int irq, void *bus_id)
 		reply = 0;
 		cb_idx = 0xFF;
 		smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
-		VF_ID = rpf->Default.VF_ID;
+		msix_index = rpf->Default.MSIxIndex;
 		if (request_desript_type ==
 		    MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
 			reply = le32_to_cpu
@@ -745,16 +780,18 @@ _base_interrupt(int irq, void *bus_id)
 		    MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS)
 			goto next;
 		if (smid)
-			cb_idx = ioc->scsi_lookup[smid - 1].cb_idx;
+			cb_idx = _base_get_cb_idx(ioc, smid);
 		if (smid && cb_idx != 0xFF) {
-			mpt_callbacks[cb_idx](ioc, smid, VF_ID, reply);
+			rc = mpt_callbacks[cb_idx](ioc, smid, msix_index,
+			    reply);
 			if (reply)
-				_base_display_reply_info(ioc, smid, VF_ID,
+				_base_display_reply_info(ioc, smid, msix_index,
 				    reply);
-			mpt2sas_base_free_smid(ioc, smid);
+			if (rc)
+				mpt2sas_base_free_smid(ioc, smid);
 		}
 		if (!smid)
-			_base_async_event(ioc, VF_ID, reply);
+			_base_async_event(ioc, msix_index, reply);
 
 		/* reply free queue handling */
 		if (reply) {
@@ -1191,19 +1228,6 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
- * mpt2sas_base_get_msg_frame_dma - obtain request mf pointer phys addr
- * @ioc: per adapter object
- * @smid: system request message index(smid zero is invalid)
- *
- * Returns phys pointer to message frame.
- */
-dma_addr_t
-mpt2sas_base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	return ioc->request_dma + (smid * ioc->request_sz);
-}
-
-/**
  * mpt2sas_base_get_msg_frame - obtain request mf pointer
  * @ioc: per adapter object
  * @smid: system request message index(smid zero is invalid)
@@ -1258,7 +1282,7 @@ mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr)
 }
 
 /**
- * mpt2sas_base_get_smid - obtain a free smid
+ * mpt2sas_base_get_smid - obtain a free smid from internal queue
  * @ioc: per adapter object
  * @cb_idx: callback index
  *
@@ -1272,6 +1296,39 @@ mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
 	u16 smid;
 
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (list_empty(&ioc->internal_free_list)) {
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
+		    ioc->name, __func__);
+		return 0;
+	}
+
+	request = list_entry(ioc->internal_free_list.next,
+	    struct request_tracker, tracker_list);
+	request->cb_idx = cb_idx;
+	smid = request->smid;
+	list_del(&request->tracker_list);
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return smid;
+}
+
+/**
+ * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ * @scmd: pointer to scsi command object
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
+    struct scsi_cmnd *scmd)
+{
+	unsigned long flags;
+	struct request_tracker *request;
+	u16 smid;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 	if (list_empty(&ioc->free_list)) {
 		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 		printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
@@ -1281,6 +1338,36 @@ mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
 
 	request = list_entry(ioc->free_list.next,
 	    struct request_tracker, tracker_list);
+	request->scmd = scmd;
+	request->cb_idx = cb_idx;
+	smid = request->smid;
+	list_del(&request->tracker_list);
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return smid;
+}
+
+/**
+ * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
+{
+	unsigned long flags;
+	struct request_tracker *request;
+	u16 smid;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (list_empty(&ioc->hpr_free_list)) {
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		return 0;
+	}
+
+	request = list_entry(ioc->hpr_free_list.next,
+	    struct request_tracker, tracker_list);
 	request->cb_idx = cb_idx;
 	smid = request->smid;
 	list_del(&request->tracker_list);
@@ -1300,10 +1387,32 @@ void
 mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 {
 	unsigned long flags;
+	int i;
 
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	ioc->scsi_lookup[smid - 1].cb_idx = 0xFF;
-	list_add_tail(&ioc->scsi_lookup[smid - 1].tracker_list,
+	if (smid >= ioc->hi_priority_smid) {
+		if (smid < ioc->internal_smid) {
+			/* hi-priority */
+			i = smid - ioc->hi_priority_smid;
+			ioc->hpr_lookup[i].cb_idx = 0xFF;
+			list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+			    &ioc->hpr_free_list);
+		} else {
+			/* internal queue */
+			i = smid - ioc->internal_smid;
+			ioc->internal_lookup[i].cb_idx = 0xFF;
+			list_add_tail(&ioc->internal_lookup[i].tracker_list,
+			    &ioc->internal_free_list);
+		}
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		return;
+	}
+
+	/* scsiio queue */
+	i = smid - 1;
+	ioc->scsi_lookup[i].cb_idx = 0xFF;
+	ioc->scsi_lookup[i].scmd = NULL;
+	list_add_tail(&ioc->scsi_lookup[i].tracker_list,
 	    &ioc->free_list);
 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 
@@ -1352,21 +1461,19 @@ static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
  * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
  * @ioc: per adapter object
  * @smid: system request message index
- * @vf_id: virtual function id
  * @handle: device handle
  *
  * Return nothing.
  */
 void
-mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id,
-    u16 handle)
+mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
 {
 	Mpi2RequestDescriptorUnion_t descriptor;
 	u64 *request = (u64 *)&descriptor;
 
 
 	descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
-	descriptor.SCSIIO.VF_ID = vf_id;
+	descriptor.SCSIIO.MSIxIndex = 0; /* TODO */
 	descriptor.SCSIIO.SMID = cpu_to_le16(smid);
 	descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
 	descriptor.SCSIIO.LMID = 0;
@@ -1379,20 +1486,18 @@ mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id,
  * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware
  * @ioc: per adapter object
  * @smid: system request message index
- * @vf_id: virtual function id
  *
  * Return nothing.
  */
 void
-mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    u8 vf_id)
+mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 {
 	Mpi2RequestDescriptorUnion_t descriptor;
 	u64 *request = (u64 *)&descriptor;
 
 	descriptor.HighPriority.RequestFlags =
 	    MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
-	descriptor.HighPriority.VF_ID = vf_id;
+	descriptor.HighPriority.MSIxIndex = 0; /* TODO */
 	descriptor.HighPriority.SMID = cpu_to_le16(smid);
 	descriptor.HighPriority.LMID = 0;
 	descriptor.HighPriority.Reserved1 = 0;
@@ -1404,18 +1509,17 @@ mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid,
  * mpt2sas_base_put_smid_default - Default, primarily used for config pages
  * @ioc: per adapter object
  * @smid: system request message index
- * @vf_id: virtual function id
  *
  * Return nothing.
  */
 void
-mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id)
+mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 {
 	Mpi2RequestDescriptorUnion_t descriptor;
 	u64 *request = (u64 *)&descriptor;
 
 	descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
-	descriptor.Default.VF_ID = vf_id;
+	descriptor.Default.MSIxIndex = 0; /* TODO */
 	descriptor.Default.SMID = cpu_to_le16(smid);
 	descriptor.Default.LMID = 0;
 	descriptor.Default.DescriptorTypeDependent = 0;
@@ -1427,21 +1531,20 @@ mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id)
  * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
  * @ioc: per adapter object
  * @smid: system request message index
- * @vf_id: virtual function id
  * @io_index: value used to track the IO
  *
  * Return nothing.
  */
 void
 mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    u8 vf_id, u16 io_index)
+    u16 io_index)
 {
 	Mpi2RequestDescriptorUnion_t descriptor;
 	u64 *request = (u64 *)&descriptor;
 
 	descriptor.SCSITarget.RequestFlags =
 	    MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET;
-	descriptor.SCSITarget.VF_ID = vf_id;
+	descriptor.SCSITarget.MSIxIndex = 0; /* TODO */
 	descriptor.SCSITarget.SMID = cpu_to_le16(smid);
 	descriptor.SCSITarget.LMID = 0;
 	descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index);
@@ -1717,6 +1820,8 @@ _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
 	}
 
 	kfree(ioc->scsi_lookup);
+	kfree(ioc->hpr_lookup);
+	kfree(ioc->internal_lookup);
 }
 
 
@@ -1736,7 +1841,6 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	u16 num_of_reply_frames;
 	u16 chains_needed_per_io;
 	u32 sz, total_sz;
-	u16 i;
 	u32 retry_sz;
 	u16 max_request_credit;
 
@@ -1764,7 +1868,10 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 		    MPT2SAS_MAX_REQUEST_QUEUE) ? MPT2SAS_MAX_REQUEST_QUEUE :
 		    facts->RequestCredit;
 	}
-	ioc->request_depth = max_request_credit;
+
+	ioc->hba_queue_depth = max_request_credit;
+	ioc->hi_priority_depth = facts->HighPriorityCredit;
+	ioc->internal_depth = ioc->hi_priority_depth + 5;
 
 	/* request frame size */
 	ioc->request_sz = facts->IOCRequestFrameSize * 4;
@@ -1802,7 +1909,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	ioc->chains_needed_per_io = chains_needed_per_io;
 
 	/* reply free queue sizing - taking into account for events */
-	num_of_reply_frames = ioc->request_depth + 32;
+	num_of_reply_frames = ioc->hba_queue_depth + 32;
 
 	/* number of replies frames can't be a multiple of 16 */
 	/* decrease number of reply frames by 1 */
@@ -1823,7 +1930,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	 * frames
 	 */
 
-	queue_size = ioc->request_depth + num_of_reply_frames + 1;
+	queue_size = ioc->hba_queue_depth + num_of_reply_frames + 1;
 	/* round up to 16 byte boundary */
 	if (queue_size % 16)
 		queue_size += 16 - (queue_size % 16);
@@ -1837,60 +1944,85 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 		if (queue_diff % 16)
 			queue_diff += 16 - (queue_diff % 16);
 
-		/* adjust request_depth, reply_free_queue_depth,
+		/* adjust hba_queue_depth, reply_free_queue_depth,
 		 * and queue_size
 		 */
-		ioc->request_depth -= queue_diff;
+		ioc->hba_queue_depth -= queue_diff;
 		ioc->reply_free_queue_depth -= queue_diff;
 		queue_size -= queue_diff;
 	}
 	ioc->reply_post_queue_depth = queue_size;
 
-	/* max scsi host queue depth */
-	ioc->shost->can_queue = ioc->request_depth - INTERNAL_CMDS_COUNT;
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host queue: depth"
-	    "(%d)\n", ioc->name, ioc->shost->can_queue));
-
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: "
 	    "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
 	    "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
 	    ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
 	    ioc->chains_needed_per_io));
 
+	ioc->scsiio_depth = ioc->hba_queue_depth -
+	    ioc->hi_priority_depth - ioc->internal_depth;
+
+	/* set the scsi host can_queue depth
+	 * with some internal commands that could be outstanding
+	 */
+	ioc->shost->can_queue = ioc->scsiio_depth - (2);
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
+	    "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
+
 	/* contiguous pool for request and chains, 16 byte align, one extra "
 	 * "frame for smid=0
 	 */
-	ioc->chain_depth = ioc->chains_needed_per_io * ioc->request_depth;
-	sz = ((ioc->request_depth + 1 + ioc->chain_depth) * ioc->request_sz);
+	ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
+	sz = ((ioc->scsiio_depth + 1 + ioc->chain_depth) * ioc->request_sz);
+
+	/* hi-priority queue */
+	sz += (ioc->hi_priority_depth * ioc->request_sz);
+
+	/* internal queue */
+	sz += (ioc->internal_depth * ioc->request_sz);
 
 	ioc->request_dma_sz = sz;
 	ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
 	if (!ioc->request) {
 		printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
-		    "failed: req_depth(%d), chains_per_io(%d), frame_sz(%d), "
-		    "total(%d kB)\n", ioc->name, ioc->request_depth,
+		    "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+		    "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
 		    ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
-		if (ioc->request_depth < MPT2SAS_SAS_QUEUE_DEPTH)
+		if (ioc->scsiio_depth < MPT2SAS_SAS_QUEUE_DEPTH)
 			goto out;
 		retry_sz += 64;
-		ioc->request_depth = max_request_credit - retry_sz;
+		ioc->hba_queue_depth = max_request_credit - retry_sz;
 		goto retry_allocation;
 	}
 
 	if (retry_sz)
 		printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
-		    "succeed: req_depth(%d), chains_per_io(%d), frame_sz(%d), "
-		    "total(%d kb)\n", ioc->name, ioc->request_depth,
+		    "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+		    "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
 		    ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
 
-	ioc->chain = ioc->request + ((ioc->request_depth + 1) *
+
+	/* hi-priority queue */
+	ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
+	    ioc->request_sz);
+	ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
+	    ioc->request_sz);
+
+	/* internal queue */
+	ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
+	    ioc->request_sz);
+	ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
+	    ioc->request_sz);
+
+	ioc->chain = ioc->internal + (ioc->internal_depth *
 	    ioc->request_sz);
-	ioc->chain_dma = ioc->request_dma + ((ioc->request_depth + 1) *
+	ioc->chain_dma = ioc->internal_dma + (ioc->internal_depth *
 	    ioc->request_sz);
+
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): "
 	    "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
-	    ioc->request, ioc->request_depth, ioc->request_sz,
-	    ((ioc->request_depth + 1) * ioc->request_sz)/1024));
+	    ioc->request, ioc->hba_queue_depth, ioc->request_sz,
+	    (ioc->hba_queue_depth * ioc->request_sz)/1024));
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool(0x%p): depth"
 	    "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->chain,
 	    ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth *
@@ -1899,7 +2031,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	    ioc->name, (unsigned long long) ioc->request_dma));
 	total_sz += sz;
 
-	ioc->scsi_lookup = kcalloc(ioc->request_depth,
+	ioc->scsi_lookup = kcalloc(ioc->scsiio_depth,
 	    sizeof(struct request_tracker), GFP_KERNEL);
 	if (!ioc->scsi_lookup) {
 		printk(MPT2SAS_ERR_FMT "scsi_lookup: kcalloc failed\n",
@@ -1907,12 +2039,38 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 		goto out;
 	}
 
-	 /* initialize some bits */
-	for (i = 0; i < ioc->request_depth; i++)
-		ioc->scsi_lookup[i].smid = i + 1;
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsiio(0x%p): "
+	    "depth(%d)\n", ioc->name, ioc->request,
+	    ioc->scsiio_depth));
+
+	/* initialize hi-priority queue smid's */
+	ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
+	    sizeof(struct request_tracker), GFP_KERNEL);
+	if (!ioc->hpr_lookup) {
+		printk(MPT2SAS_ERR_FMT "hpr_lookup: kcalloc failed\n",
+		    ioc->name);
+		goto out;
+	}
+	ioc->hi_priority_smid = ioc->scsiio_depth + 1;
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hi_priority(0x%p): "
+	    "depth(%d), start smid(%d)\n", ioc->name, ioc->hi_priority,
+	    ioc->hi_priority_depth, ioc->hi_priority_smid));
+
+	/* initialize internal queue smid's */
+	ioc->internal_lookup = kcalloc(ioc->internal_depth,
+	    sizeof(struct request_tracker), GFP_KERNEL);
+	if (!ioc->internal_lookup) {
+		printk(MPT2SAS_ERR_FMT "internal_lookup: kcalloc failed\n",
+		    ioc->name);
+		goto out;
+	}
+	ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "internal(0x%p): "
+	    "depth(%d), start smid(%d)\n", ioc->name, ioc->internal,
+	     ioc->internal_depth, ioc->internal_smid));
 
 	/* sense buffers, 4 byte align */
-	sz = ioc->request_depth * SCSI_SENSE_BUFFERSIZE;
+	sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
 	ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
 	    0);
 	if (!ioc->sense_dma_pool) {
@@ -1929,7 +2087,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	}
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
 	    "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
-	    "(%d kB)\n", ioc->name, ioc->sense, ioc->request_depth,
+	    "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
 	    SCSI_SENSE_BUFFERSIZE, sz/1024));
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n",
 	    ioc->name, (unsigned long long)ioc->sense_dma));
@@ -2304,7 +2462,7 @@ _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
 	    ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
 	    &ioc->chip->Doorbell);
 
-	if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+	if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
 		printk(MPT2SAS_ERR_FMT "doorbell handshake "
 		   "int failed (line=%d)\n", ioc->name, __LINE__);
 		return -EFAULT;
@@ -2454,7 +2612,8 @@ mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
 	if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
 	    mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
 		ioc->ioc_link_reset_in_progress = 1;
-	mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->base_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
 	    msecs_to_jiffies(10000));
 	if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
@@ -2555,7 +2714,8 @@ mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
 	request = mpt2sas_base_get_msg_frame(ioc, smid);
 	ioc->base_cmds.smid = smid;
 	memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
-	mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->base_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
 	    msecs_to_jiffies(10000));
 	if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
@@ -2701,13 +2861,12 @@ _base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 /**
  * _base_send_ioc_init - send ioc_init to firmware
  * @ioc: per adapter object
- * @VF_ID: virtual function id
  * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
+_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 {
 	Mpi2IOCInitRequest_t mpi_request;
 	Mpi2IOCInitReply_t mpi_reply;
@@ -2719,7 +2878,8 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
 	memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
 	mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
-	mpi_request.VF_ID = VF_ID;
+	mpi_request.VF_ID = 0; /* TODO */
+	mpi_request.VP_ID = 0;
 	mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
 	mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
 
@@ -2795,13 +2955,12 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
 /**
  * _base_send_port_enable - send port_enable(discovery stuff) to firmware
  * @ioc: per adapter object
- * @VF_ID: virtual function id
  * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
+_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 {
 	Mpi2PortEnableRequest_t *mpi_request;
 	u32 ioc_state;
@@ -2829,9 +2988,11 @@ _base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
 	ioc->base_cmds.smid = smid;
 	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
 	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
-	mpi_request->VF_ID = VF_ID;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
 
-	mpt2sas_base_put_smid_default(ioc, smid, VF_ID);
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->base_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
 	    300*HZ);
 	if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
@@ -2892,13 +3053,12 @@ _base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event)
 /**
  * _base_event_notification - send event notification
  * @ioc: per adapter object
- * @VF_ID: virtual function id
  * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_event_notification(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
+_base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 {
 	Mpi2EventNotificationRequest_t *mpi_request;
 	unsigned long timeleft;
@@ -2926,11 +3086,13 @@ _base_event_notification(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
 	ioc->base_cmds.smid = smid;
 	memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
 	mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
-	mpi_request->VF_ID = VF_ID;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
 	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
 		mpi_request->EventMasks[i] =
 		    le32_to_cpu(ioc->event_masks[i]);
-	mpt2sas_base_put_smid_default(ioc, smid, VF_ID);
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->base_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
 	if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
 		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
@@ -2981,7 +3143,7 @@ mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type)
 		return;
 
 	mutex_lock(&ioc->base_cmds.mutex);
-	_base_event_notification(ioc, 0, CAN_SLEEP);
+	_base_event_notification(ioc, CAN_SLEEP);
 	mutex_unlock(&ioc->base_cmds.mutex);
 }
 
@@ -3006,7 +3168,6 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 
 	drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "clear interrupts\n",
 	    ioc->name));
-	writel(0, &ioc->chip->HostInterruptStatus);
 
 	count = 0;
 	do {
@@ -3160,30 +3321,60 @@ _base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 /**
  * _base_make_ioc_operational - put controller in OPERATIONAL state
  * @ioc: per adapter object
- * @VF_ID: virtual function id
  * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-    int sleep_flag)
+_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 {
 	int r, i;
 	unsigned long	flags;
 	u32 reply_address;
+	u16 smid;
+	struct _tr_list *delayed_tr, *delayed_tr_next;
 
 	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 	    __func__));
 
+	/* clean the delayed target reset list */
+	list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+	    &ioc->delayed_tr_list, list) {
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+	}
+
 	/* initialize the scsi lookup free list */
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 	INIT_LIST_HEAD(&ioc->free_list);
-	for (i = 0; i < ioc->request_depth; i++) {
+	smid = 1;
+	for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
 		ioc->scsi_lookup[i].cb_idx = 0xFF;
+		ioc->scsi_lookup[i].smid = smid;
+		ioc->scsi_lookup[i].scmd = NULL;
 		list_add_tail(&ioc->scsi_lookup[i].tracker_list,
 		    &ioc->free_list);
 	}
+
+	/* hi-priority queue */
+	INIT_LIST_HEAD(&ioc->hpr_free_list);
+	smid = ioc->hi_priority_smid;
+	for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
+		ioc->hpr_lookup[i].cb_idx = 0xFF;
+		ioc->hpr_lookup[i].smid = smid;
+		list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+		    &ioc->hpr_free_list);
+	}
+
+	/* internal queue */
+	INIT_LIST_HEAD(&ioc->internal_free_list);
+	smid = ioc->internal_smid;
+	for (i = 0; i < ioc->internal_depth; i++, smid++) {
+		ioc->internal_lookup[i].cb_idx = 0xFF;
+		ioc->internal_lookup[i].smid = smid;
+		list_add_tail(&ioc->internal_lookup[i].tracker_list,
+		    &ioc->internal_free_list);
+	}
 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 
 	/* initialize Reply Free Queue */
@@ -3196,7 +3387,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	for (i = 0; i < ioc->reply_post_queue_depth; i++)
 		ioc->reply_post_free[i].Words = ULLONG_MAX;
 
-	r = _base_send_ioc_init(ioc, VF_ID, sleep_flag);
+	r = _base_send_ioc_init(ioc, sleep_flag);
 	if (r)
 		return r;
 
@@ -3207,14 +3398,14 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	writel(0, &ioc->chip->ReplyPostHostIndex);
 
 	_base_unmask_interrupts(ioc);
-	r = _base_event_notification(ioc, VF_ID, sleep_flag);
+	r = _base_event_notification(ioc, sleep_flag);
 	if (r)
 		return r;
 
 	if (sleep_flag == CAN_SLEEP)
 		_base_static_config_pages(ioc);
 
-	r = _base_send_port_enable(ioc, VF_ID, sleep_flag);
+	r = _base_send_port_enable(ioc, sleep_flag);
 	if (r)
 		return r;
 
@@ -3278,6 +3469,17 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	if (r)
 		goto out_free_resources;
 
+	ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
+	    sizeof(Mpi2PortFactsReply_t), GFP_KERNEL);
+	if (!ioc->pfacts)
+		goto out_free_resources;
+
+	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
+		r = _base_get_port_facts(ioc, i, CAN_SLEEP);
+		if (r)
+			goto out_free_resources;
+	}
+
 	r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
 	if (r)
 		goto out_free_resources;
@@ -3286,7 +3488,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 
 	/* base internal command bits */
 	mutex_init(&ioc->base_cmds.mutex);
-	init_completion(&ioc->base_cmds.done);
 	ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
 	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
 
@@ -3294,7 +3495,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
 	ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
 	mutex_init(&ioc->transport_cmds.mutex);
-	init_completion(&ioc->transport_cmds.done);
 
 	/* task management internal command bits */
 	ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
@@ -3310,7 +3510,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
 	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
 	mutex_init(&ioc->ctl_cmds.mutex);
-	init_completion(&ioc->ctl_cmds.done);
 
 	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
 		ioc->event_masks[i] = -1;
@@ -3327,18 +3526,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
 	_base_unmask_events(ioc, MPI2_EVENT_TASK_SET_FULL);
 	_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
-
-	ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
-	    sizeof(Mpi2PortFactsReply_t), GFP_KERNEL);
-	if (!ioc->pfacts)
-		goto out_free_resources;
-
-	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
-		r = _base_get_port_facts(ioc, i, CAN_SLEEP);
-		if (r)
-			goto out_free_resources;
-	}
-	r = _base_make_ioc_operational(ioc, 0, CAN_SLEEP);
+	r = _base_make_ioc_operational(ioc, CAN_SLEEP);
 	if (r)
 		goto out_free_resources;
 
@@ -3466,7 +3654,7 @@ _wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 
 	/* pending command count */
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	for (i = 0; i < ioc->request_depth; i++)
+	for (i = 0; i < ioc->scsiio_depth; i++)
 		if (ioc->scsi_lookup[i].cb_idx != 0xFF)
 			ioc->pending_io_count++;
 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
@@ -3490,7 +3678,7 @@ int
 mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
     enum reset_type type)
 {
-	int r, i;
+	int r;
 	unsigned long flags;
 
 	dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
@@ -3513,9 +3701,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 	if (r)
 		goto out;
 	_base_reset_handler(ioc, MPT2_IOC_AFTER_RESET);
-	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++)
-		r = _base_make_ioc_operational(ioc, ioc->pfacts[i].VF_ID,
-		    sleep_flag);
+	r = _base_make_ioc_operational(ioc, sleep_flag);
 	if (!r)
 		_base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
  out:
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 2faab1e690e9..0cf6bc236e4d 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -3,7 +3,7 @@
  * for access to MPT (Message Passing Technology) firmware.
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_base.h
- * Copyright (C) 2007-2008  LSI Corporation
+ * Copyright (C) 2007-2009  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -69,10 +69,10 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"01.100.06.00"
-#define MPT2SAS_MAJOR_VERSION		01
+#define MPT2SAS_DRIVER_VERSION		"02.100.03.00"
+#define MPT2SAS_MAJOR_VERSION		02
 #define MPT2SAS_MINOR_VERSION		100
-#define MPT2SAS_BUILD_VERSION		06
+#define MPT2SAS_BUILD_VERSION		03
 #define MPT2SAS_RELEASE_VERSION		00
 
 /*
@@ -264,6 +264,13 @@ struct _internal_cmd {
  * SAS Topology Structures
  */
 
+#define MPTSAS_STATE_TR_SEND		0x0001
+#define MPTSAS_STATE_TR_COMPLETE	0x0002
+#define MPTSAS_STATE_CNTRL_SEND		0x0004
+#define MPTSAS_STATE_CNTRL_COMPLETE	0x0008
+
+#define MPT2SAS_REQ_SAS_CNTRL		0x0010
+
 /**
  * struct _sas_device - attached device information
  * @list: sas device list
@@ -300,6 +307,7 @@ struct _sas_device {
 	u16	slot;
 	u8	hidden_raid_component;
 	u8	responding;
+	u16	state;
 };
 
 /**
@@ -436,6 +444,17 @@ struct request_tracker {
 	struct list_head tracker_list;
 };
 
+/**
+ * struct _tr_list - target reset list
+ * @handle: device handle
+ * @state: state machine
+ */
+struct _tr_list {
+	struct list_head list;
+	u16	handle;
+	u16	state;
+};
+
 typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
 
 /**
@@ -510,8 +529,9 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
  * @config_page_sz: config page size
  * @config_page: reserve memory for config page payload
  * @config_page_dma:
+ * @hba_queue_depth: hba request queue depth
  * @sge_size: sg element size for either 32/64 bit
- * @request_depth: hba request queue depth
+ * @scsiio_depth: SCSI_IO queue depth
  * @request_sz: per request frame size
  * @request: pool of request frames
  * @request_dma:
@@ -528,6 +548,18 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
  * @chains_needed_per_io: max chains per io
  * @chain_offset_value_for_main_message: location 1st sg in main
  * @chain_depth: total chains allocated
+ * @hi_priority_smid:
+ * @hi_priority:
+ * @hi_priority_dma:
+ * @hi_priority_depth:
+ * @hpr_lookup:
+ * @hpr_free_list:
+ * @internal_smid:
+ * @internal:
+ * @internal_dma:
+ * @internal_depth:
+ * @internal_lookup:
+ * @internal_free_list:
  * @sense: pool of sense
  * @sense_dma:
  * @sense_dma_pool:
@@ -597,6 +629,8 @@ struct MPT2SAS_ADAPTER {
 	u8		ctl_cb_idx;
 	u8		base_cb_idx;
 	u8		config_cb_idx;
+	u8		tm_tr_cb_idx;
+	u8		tm_sas_control_cb_idx;
 	struct _internal_cmd base_cmds;
 	struct _internal_cmd transport_cmds;
 	struct _internal_cmd tm_cmds;
@@ -643,9 +677,10 @@ struct MPT2SAS_ADAPTER {
 	void 		*config_page;
 	dma_addr_t	config_page_dma;
 
-	/* request */
+	/* scsiio request */
+	u16		hba_queue_depth;
 	u16		sge_size;
-	u16 		request_depth;
+	u16 		scsiio_depth;
 	u16		request_sz;
 	u8		*request;
 	dma_addr_t	request_dma;
@@ -665,6 +700,22 @@ struct MPT2SAS_ADAPTER {
 	u16		chain_offset_value_for_main_message;
 	u16		chain_depth;
 
+	/* hi-priority queue */
+	u16		hi_priority_smid;
+	u8		*hi_priority;
+	dma_addr_t	hi_priority_dma;
+	u16		hi_priority_depth;
+	struct request_tracker *hpr_lookup;
+	struct list_head hpr_free_list;
+
+	/* internal queue */
+	u16		internal_smid;
+	u8		*internal;
+	dma_addr_t	internal_dma;
+	u16		internal_depth;
+	struct request_tracker *internal_lookup;
+	struct list_head internal_free_list;
+
 	/* sense */
 	u8		*sense;
 	dma_addr_t	sense_dma;
@@ -690,6 +741,8 @@ struct MPT2SAS_ADAPTER {
 	struct dma_pool *reply_post_free_dma_pool;
 	u32		reply_post_host_index;
 
+	struct list_head delayed_tr_list;
+
 	/* diag buffer support */
 	u8		*diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
 	u32		diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
@@ -701,7 +754,7 @@ struct MPT2SAS_ADAPTER {
 	u32		diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
 };
 
-typedef void (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
+typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
     u32 reply);
 
 
@@ -720,22 +773,28 @@ int mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid);
 void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid);
 void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr);
-dma_addr_t mpt2sas_base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-dma_addr_t mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid);
+dma_addr_t mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc,
+    u16 smid);
+
+/* hi-priority queue */
+u16 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
+u16 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
+    struct scsi_cmnd *scmd);
 
 u16 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
 void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id,
+void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid,
     u16 handle);
-void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id);
+void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid);
 void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    u8 vf_id, u16 io_index);
-void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id);
+    u16 io_index);
+void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid);
 void mpt2sas_base_initialize_callback_handler(void);
 u8 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func);
 void mpt2sas_base_release_callback_handler(u8 cb_idx);
 
-void mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply);
+u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+    u32 reply);
 void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
 
 u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
@@ -749,6 +808,8 @@ int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
 void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type);
 
 /* scsih shared API */
+u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
+    u32 reply);
 void mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
     u8 type, u16 smid_task, ulong timeout);
 void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
@@ -760,11 +821,11 @@ struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAP
 struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address(
     struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
 
-void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply);
 void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
 
 /* config shared API */
-void mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply);
+u8 mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+    u32 reply);
 int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys);
 int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
     Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
@@ -817,14 +878,17 @@ extern struct device_attribute *mpt2sas_host_attrs[];
 extern struct device_attribute *mpt2sas_dev_attrs[];
 void mpt2sas_ctl_init(void);
 void mpt2sas_ctl_exit(void);
-void mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply);
+u8 mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+    u32 reply);
 void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
-void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply);
+u8 mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
+    u32 reply);
 void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
     Mpi2EventNotificationReply_t *mpi_reply);
 
 /* transport shared API */
-void mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply);
+u8 mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+    u32 reply);
 struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc,
     u16 handle, u16 parent_handle);
 void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
@@ -838,6 +902,8 @@ void mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 extern struct sas_function_template mpt2sas_transport_functions;
 extern struct scsi_transport_template *mpt2sas_transport_template;
 extern int scsi_internal_device_block(struct scsi_device *sdev);
+extern u8 mpt2sas_stm_zero_smid_handler(struct MPT2SAS_ADAPTER *ioc,
+    u8 msix_index, u32 reply);
 extern int scsi_internal_device_unblock(struct scsi_device *sdev);
 
 #endif /* MPT2SAS_BASE_H_INCLUDED */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index ab8c560865d8..594a389c6526 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -2,7 +2,7 @@
  * This module provides common API for accessing firmware configuration pages
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2008  LSI Corporation
+ * Copyright (C) 2007-2009  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -227,23 +227,25 @@ _config_free_config_dma_memory(struct MPT2SAS_ADAPTER *ioc,
  * mpt2sas_config_done - config page completion routine
  * @ioc: per adapter object
  * @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  * Context: none.
  *
  * The callback handler when using _config_request.
  *
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
  */
-void
-mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+u8
+mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+    u32 reply)
 {
 	MPI2DefaultReply_t *mpi_reply;
 
 	if (ioc->config_cmds.status == MPT2_CMD_NOT_USED)
-		return;
+		return 1;
 	if (ioc->config_cmds.smid != smid)
-		return;
+		return 1;
 	ioc->config_cmds.status |= MPT2_CMD_COMPLETE;
 	mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	if (mpi_reply) {
@@ -257,6 +259,7 @@ mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 #endif
 	ioc->config_cmds.smid = USHORT_MAX;
 	complete(&ioc->config_cmds.done);
+	return 1;
 }
 
 /**
@@ -303,6 +306,9 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	retry_count = 0;
 	memset(&mem, 0, sizeof(struct config_request));
 
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+
 	if (config_page) {
 		mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
 		mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
@@ -380,7 +386,7 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	_config_display_some_debug(ioc, smid, "config_request", NULL);
 #endif
 	init_completion(&ioc->config_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid, config_request->VF_ID);
+	mpt2sas_base_put_smid_default(ioc, smid);
 	timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
 	    timeout*HZ);
 	if (!(ioc->config_cmds.status & MPT2_CMD_COMPLETE)) {
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index c2a51018910f..57d724633906 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -3,7 +3,7 @@
  * controllers
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c
- * Copyright (C) 2007-2008  LSI Corporation
+ * Copyright (C) 2007-2009  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -219,23 +219,25 @@ _ctl_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid,
  * mpt2sas_ctl_done - ctl module completion routine
  * @ioc: per adapter object
  * @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  * Context: none.
  *
  * The callback handler when using ioc->ctl_cb_idx.
  *
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
  */
-void
-mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+u8
+mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
 {
 	MPI2DefaultReply_t *mpi_reply;
 
 	if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED)
-		return;
+		return 1;
 	if (ioc->ctl_cmds.smid != smid)
-		return;
+		return 1;
 	ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE;
 	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	if (mpi_reply) {
@@ -247,6 +249,7 @@ mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 #endif
 	ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING;
 	complete(&ioc->ctl_cmds.done);
+	return 1;
 }
 
 /**
@@ -328,22 +331,25 @@ mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
 /**
  * mpt2sas_ctl_event_callback - firmware event handler (called at ISR time)
  * @ioc: per adapter object
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  * Context: interrupt.
  *
  * This function merely adds a new work task into ioc->firmware_event_thread.
  * The tasks are worked from _firmware_event_work in user context.
  *
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
  */
-void
-mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
+u8
+mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply)
 {
 	Mpi2EventNotificationReply_t *mpi_reply;
 
 	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	mpt2sas_ctl_add_to_event_log(ioc, mpi_reply);
+	return 1;
 }
 
 /**
@@ -507,7 +513,7 @@ _ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
 
 	handle = le16_to_cpu(tm_request->DevHandle);
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	for (i = ioc->request_depth; i && !found; i--) {
+	for (i = ioc->scsiio_depth; i && !found; i--) {
 		scmd = ioc->scsi_lookup[i - 1].scmd;
 		if (scmd == NULL || scmd->device == NULL ||
 		    scmd->device->hostdata == NULL)
@@ -614,7 +620,7 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 		printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
 		    ioc->name, __func__);
 
-	smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
+	smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->ctl_cb_idx, NULL);
 	if (!smid) {
 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 		    ioc->name, __func__);
@@ -737,7 +743,7 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 		    (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid);
 		priv_sense = mpt2sas_base_get_sense_buffer(ioc, smid);
 		memset(priv_sense, 0, SCSI_SENSE_BUFFERSIZE);
-		mpt2sas_base_put_smid_scsi_io(ioc, smid, 0,
+		mpt2sas_base_put_smid_scsi_io(ioc, smid,
 		    le16_to_cpu(mpi_request->FunctionDependent1));
 		break;
 	}
@@ -759,8 +765,7 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 		mutex_lock(&ioc->tm_cmds.mutex);
 		mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu(
 		    tm_request->DevHandle));
-		mpt2sas_base_put_smid_hi_priority(ioc, smid,
-		    mpi_request->VF_ID);
+		mpt2sas_base_put_smid_hi_priority(ioc, smid);
 		break;
 	}
 	case MPI2_FUNCTION_SMP_PASSTHROUGH:
@@ -781,7 +786,7 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 			ioc->ioc_link_reset_in_progress = 1;
 			ioc->ignore_loginfos = 1;
 		}
-		mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+		mpt2sas_base_put_smid_default(ioc, smid);
 		break;
 	}
 	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
@@ -795,11 +800,11 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 			ioc->ioc_link_reset_in_progress = 1;
 			ioc->ignore_loginfos = 1;
 		}
-		mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+		mpt2sas_base_put_smid_default(ioc, smid);
 		break;
 	}
 	default:
-		mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+		mpt2sas_base_put_smid_default(ioc, smid);
 		break;
 	}
 
@@ -807,6 +812,7 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 		timeout = MPT2_IOCTL_DEFAULT_TIMEOUT;
 	else
 		timeout = karg.timeout;
+	init_completion(&ioc->ctl_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
 	    timeout*HZ);
 	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
@@ -1371,6 +1377,8 @@ _ctl_diag_register(void __user *arg, enum block_state state)
 	mpi_request->Flags = cpu_to_le32(karg.diagnostic_flags);
 	mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
 	mpi_request->BufferLength = cpu_to_le32(request_data_sz);
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
 
 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(0x%p), "
 	    "dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data,
@@ -1380,7 +1388,8 @@ _ctl_diag_register(void __user *arg, enum block_state state)
 		mpi_request->ProductSpecific[i] =
 			cpu_to_le32(ioc->product_specific[buffer_type][i]);
 
-	mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->ctl_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
 	    MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
 
@@ -1643,8 +1652,11 @@ _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
 
 	mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
 	mpi_request->BufferType = buffer_type;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
 
-	mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->ctl_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
 	    MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
 
@@ -1902,8 +1914,11 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state)
 	for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
 		mpi_request->ProductSpecific[i] =
 			cpu_to_le32(ioc->product_specific[buffer_type][i]);
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
 
-	mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->ctl_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
 	    MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
 
@@ -2069,6 +2084,7 @@ static long
 _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long ret;
+
 	lock_kernel();
 	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg);
 	unlock_kernel();
@@ -2143,6 +2159,7 @@ static long
 _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
 {
 	long ret;
+
 	lock_kernel();
 	if (cmd == MPT2COMMAND32)
 		ret = _ctl_compat_mpt_command(file, cmd, arg);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index 4da11435533f..211f296dd191 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -3,7 +3,7 @@
  * controllers
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
- * Copyright (C) 2007-2008  LSI Corporation
+ * Copyright (C) 2007-2009  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt2sas/mpt2sas_debug.h b/drivers/scsi/mpt2sas/mpt2sas_debug.h
index ad325096e842..5308a25cb307 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_debug.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_debug.h
@@ -2,7 +2,7 @@
  * Logging Support for MPT (Message Passing Technology) based controllers
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_debug.c
- * Copyright (C) 2007-2008  LSI Corporation
+ * Copyright (C) 2007-2009  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 774b34525bba..86ab32d7ab15 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2,7 +2,7 @@
  * Scsi Host Layer for MPT (Message Passing Technology) based controllers
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c
- * Copyright (C) 2007-2008  LSI Corporation
+ * Copyright (C) 2007-2009  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -79,6 +79,9 @@ static u8 transport_cb_idx = -1;
 static u8 config_cb_idx = -1;
 static int mpt_ids;
 
+static u8 tm_tr_cb_idx = -1 ;
+static u8 tm_sas_control_cb_idx = -1;
+
 /* command line options */
 static u32 logging_level;
 MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info "
@@ -109,6 +112,7 @@ struct sense_info {
  * @work: work object (ioc->fault_reset_work_q)
  * @ioc: per adapter object
  * @VF_ID: virtual function id
+ * @VP_ID: virtual port id
  * @host_reset_handling: handling events during host reset
  * @ignore: flag meaning this event has been marked to ignore
  * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h
@@ -121,6 +125,7 @@ struct fw_event_work {
 	struct work_struct	work;
 	struct MPT2SAS_ADAPTER *ioc;
 	u8			VF_ID;
+	u8			VP_ID;
 	u8			host_reset_handling;
 	u8			ignore;
 	u16			event;
@@ -138,8 +143,10 @@ struct fw_event_work {
  * @lun: lun number
  * @cdb_length: cdb length
  * @cdb: cdb contents
- * @valid_reply: flag set for reply message
  * @timeout: timeout for this command
+ * @VF_ID: virtual function id
+ * @VP_ID: virtual port id
+ * @valid_reply: flag set for reply message
  * @sense_length: sense length
  * @ioc_status: ioc status
  * @scsi_state: scsi state
@@ -161,6 +168,8 @@ struct _scsi_io_transfer {
 	u8	cdb_length;
 	u8	cdb[32];
 	u8	timeout;
+	u8	VF_ID;
+	u8	VP_ID;
 	u8	valid_reply;
   /* the following bits are only valid when 'valid_reply = 1' */
 	u32	sense_length;
@@ -756,66 +765,16 @@ _scsih_is_end_device(u32 device_info)
 }
 
 /**
- * _scsih_scsi_lookup_get - returns scmd entry
+ * mptscsih_get_scsi_lookup - returns scmd entry
  * @ioc: per adapter object
  * @smid: system request message index
- * Context: This function will acquire ioc->scsi_lookup_lock.
  *
  * Returns the smid stored scmd pointer.
  */
 static struct scsi_cmnd *
 _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 {
-	unsigned long	flags;
-	struct scsi_cmnd *scmd;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	scmd = ioc->scsi_lookup[smid - 1].scmd;
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-	return scmd;
-}
-
-/**
- * mptscsih_getclear_scsi_lookup - returns scmd entry
- * @ioc: per adapter object
- * @smid: system request message index
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * Returns the smid stored scmd pointer, as well as clearing the scmd pointer.
- */
-static struct scsi_cmnd *
-_scsih_scsi_lookup_getclear(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	unsigned long	flags;
-	struct scsi_cmnd *scmd;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	scmd = ioc->scsi_lookup[smid - 1].scmd;
-	ioc->scsi_lookup[smid - 1].scmd = NULL;
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-	return scmd;
-}
-
-/**
- * _scsih_scsi_lookup_set - updates scmd entry in lookup
- * @ioc: per adapter object
- * @smid: system request message index
- * @scmd: pointer to scsi command object
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * This will save scmd pointer in the scsi_lookup array.
- *
- * Return nothing.
- */
-static void
-_scsih_scsi_lookup_set(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    struct scsi_cmnd *scmd)
-{
-	unsigned long	flags;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	ioc->scsi_lookup[smid - 1].scmd = scmd;
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return ioc->scsi_lookup[smid - 1].scmd;
 }
 
 /**
@@ -838,9 +797,9 @@ _scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd
 
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 	smid = 0;
-	for (i = 0; i < ioc->request_depth; i++) {
+	for (i = 0; i < ioc->scsiio_depth; i++) {
 		if (ioc->scsi_lookup[i].scmd == scmd) {
-			smid = i + 1;
+			smid = ioc->scsi_lookup[i].smid;
 			goto out;
 		}
 	}
@@ -869,7 +828,7 @@ _scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id,
 
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 	found = 0;
-	for (i = 0 ; i < ioc->request_depth; i++) {
+	for (i = 0 ; i < ioc->scsiio_depth; i++) {
 		if (ioc->scsi_lookup[i].scmd &&
 		    (ioc->scsi_lookup[i].scmd->device->id == id &&
 		    ioc->scsi_lookup[i].scmd->device->channel == channel)) {
@@ -903,7 +862,7 @@ _scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
 
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 	found = 0;
-	for (i = 0 ; i < ioc->request_depth; i++) {
+	for (i = 0 ; i < ioc->scsiio_depth; i++) {
 		if (ioc->scsi_lookup[i].scmd &&
 		    (ioc->scsi_lookup[i].scmd->device->id == id &&
 		    ioc->scsi_lookup[i].scmd->device->channel == channel &&
@@ -1113,7 +1072,7 @@ _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 }
 
 /**
- * _scsih_change_queue_depth - changing device queue tag type
+ * _scsih_change_queue_type - changing device queue tag type
  * @sdev: scsi device struct
  * @tag_type: requested tag type
  *
@@ -1679,23 +1638,24 @@ _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
  * _scsih_tm_done - tm completion routine
  * @ioc: per adapter object
  * @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  * Context: none.
  *
  * The callback handler when using scsih_issue_tm.
  *
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
  */
-static void
-_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+static u8
+_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 {
 	MPI2DefaultReply_t *mpi_reply;
 
 	if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED)
-		return;
+		return 1;
 	if (ioc->tm_cmds.smid != smid)
-		return;
+		return 1;
 	ioc->tm_cmds.status |= MPT2_CMD_COMPLETE;
 	mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	if (mpi_reply) {
@@ -1704,6 +1664,7 @@ _scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 	}
 	ioc->tm_cmds.status &= ~MPT2_CMD_PENDING;
 	complete(&ioc->tm_cmds.done);
+	return 1;
 }
 
 /**
@@ -1790,7 +1751,6 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
 	u16 smid = 0;
 	u32 ioc_state;
 	unsigned long timeleft;
-	u8 VF_ID = 0;
 
 	if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) {
 		printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n",
@@ -1817,7 +1777,7 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
 		goto issue_host_reset;
 	}
 
-	smid = mpt2sas_base_get_smid(ioc, ioc->tm_cb_idx);
+	smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
 	if (!smid) {
 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 		    ioc->name, __func__);
@@ -1825,7 +1785,8 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
 	}
 
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x),"
-	    " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, smid));
+	    " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type,
+	    smid_task));
 	ioc->tm_cmds.status = MPT2_CMD_PENDING;
 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 	ioc->tm_cmds.smid = smid;
@@ -1834,10 +1795,12 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
 	mpi_request->DevHandle = cpu_to_le16(handle);
 	mpi_request->TaskType = type;
 	mpi_request->TaskMID = cpu_to_le16(smid_task);
+	mpi_request->VP_ID = 0;  /* TODO */
+	mpi_request->VF_ID = 0;
 	int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
 	mpt2sas_scsih_set_tm_flag(ioc, handle);
 	init_completion(&ioc->tm_cmds.done);
-	mpt2sas_base_put_smid_hi_priority(ioc, smid, VF_ID);
+	mpt2sas_base_put_smid_hi_priority(ioc, smid);
 	timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
 	mpt2sas_scsih_clear_tm_flag(ioc, handle);
 	if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) {
@@ -2075,7 +2038,7 @@ _scsih_target_reset(struct scsi_cmnd *scmd)
 }
 
 /**
- * _scsih_abort - eh threads main host reset routine
+ * _scsih_host_reset - eh threads main host reset routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
@@ -2354,6 +2317,231 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
+ * _scsih_tm_tr_send - send task management request
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt time.
+ *
+ * This code is to initiate the device removal handshake protocal
+ * with controller firmware.  This function will issue target reset
+ * using high priority request queue.  It will send a sas iounit
+ * controll request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
+ *
+ * This is designed to send muliple task management request at the same
+ * time to the fifo. If the fifo is full, we will append the request,
+ * and process it in a future completion.
+ */
+static void
+_scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	struct MPT2SAS_TARGET *sas_target_priv_data;
+	u16 smid;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	struct _tr_list *delayed_tr;
+
+	if (ioc->shost_recovery) {
+		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		return;
+	}
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	if (!sas_device) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
+		    ioc->name, __func__);
+		return;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	/* skip is hidden raid component */
+	if (sas_device->hidden_raid_component)
+		return;
+
+	smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
+	if (!smid) {
+		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+		if (!delayed_tr)
+			return;
+		INIT_LIST_HEAD(&delayed_tr->list);
+		delayed_tr->handle = handle;
+		delayed_tr->state = MPT2SAS_REQ_SAS_CNTRL;
+		list_add_tail(&delayed_tr->list,
+		    &ioc->delayed_tr_list);
+		if (sas_device->starget)
+			dewtprintk(ioc, starget_printk(KERN_INFO,
+			    sas_device->starget, "DELAYED:tr:handle(0x%04x), "
+			    "(open)\n", sas_device->handle));
+		return;
+	}
+
+	if (sas_device->starget && sas_device->starget->hostdata) {
+		sas_target_priv_data = sas_device->starget->hostdata;
+		sas_target_priv_data->tm_busy = 1;
+		dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
+		    "tr:handle(0x%04x), (open)\n", sas_device->handle));
+	}
+
+	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+	sas_device->state |= MPTSAS_STATE_TR_SEND;
+	sas_device->state |= MPT2SAS_REQ_SAS_CNTRL;
+	mpt2sas_base_put_smid_hi_priority(ioc, smid);
+}
+
+
+
+/**
+ * _scsih_sas_control_complete - completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the sas iounit controll completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocal with controller firmware.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
+    u8 msix_index, u32 reply)
+{
+	unsigned long flags;
+	u16 handle;
+	struct _sas_device *sas_device;
+	Mpi2SasIoUnitControlReply_t *mpi_reply =
+	    mpt2sas_base_get_reply_virt_addr(ioc, reply);
+
+	handle = le16_to_cpu(mpi_reply->DevHandle);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	if (!sas_device) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
+		    ioc->name, __func__);
+		return 1;
+	}
+	sas_device->state |= MPTSAS_STATE_CNTRL_COMPLETE;
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (sas_device->starget)
+		dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
+		    "sc_complete:handle(0x%04x), "
+		    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+		    handle, le16_to_cpu(mpi_reply->IOCStatus),
+		    le32_to_cpu(mpi_reply->IOCLogInfo)));
+	return 1;
+}
+
+/**
+ * _scsih_tm_tr_complete -
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the target reset completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocal with controller firmware.
+ * It will send a sas iounit controll request (MPI2_SAS_OP_REMOVE_DEVICE)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+    u32 reply)
+{
+	unsigned long flags;
+	u16 handle;
+	struct _sas_device *sas_device;
+	Mpi2SCSITaskManagementReply_t *mpi_reply =
+	    mpt2sas_base_get_reply_virt_addr(ioc, reply);
+	Mpi2SasIoUnitControlRequest_t *mpi_request;
+	u16 smid_sas_ctrl;
+	struct MPT2SAS_TARGET *sas_target_priv_data;
+	struct _tr_list *delayed_tr;
+	u8 rc;
+
+	handle = le16_to_cpu(mpi_reply->DevHandle);
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	if (!sas_device) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
+		    ioc->name, __func__);
+		return 1;
+	}
+	sas_device->state |= MPTSAS_STATE_TR_COMPLETE;
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (sas_device->starget)
+		dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
+		    "tr_complete:handle(0x%04x), (%s) ioc_status(0x%04x), "
+		    "loginfo(0x%08x), completed(%d)\n",
+		    sas_device->handle, (sas_device->state &
+		    MPT2SAS_REQ_SAS_CNTRL) ? "open" : "active",
+		    le16_to_cpu(mpi_reply->IOCStatus),
+		    le32_to_cpu(mpi_reply->IOCLogInfo),
+		    le32_to_cpu(mpi_reply->TerminationCount)));
+
+	if (sas_device->starget && sas_device->starget->hostdata) {
+		sas_target_priv_data = sas_device->starget->hostdata;
+		sas_target_priv_data->tm_busy = 0;
+	}
+
+	if (!list_empty(&ioc->delayed_tr_list)) {
+		delayed_tr = list_entry(ioc->delayed_tr_list.next,
+		    struct _tr_list, list);
+		mpt2sas_base_free_smid(ioc, smid);
+		if (delayed_tr->state & MPT2SAS_REQ_SAS_CNTRL)
+			_scsih_tm_tr_send(ioc, delayed_tr->handle);
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+		rc = 0; /* tells base_interrupt not to free mf */
+	} else
+		rc = 1;
+
+
+	if (!(sas_device->state & MPT2SAS_REQ_SAS_CNTRL))
+		return rc;
+
+	if (ioc->shost_recovery) {
+		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		return rc;
+	}
+
+	smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
+	if (!smid_sas_ctrl) {
+		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		return rc;
+	}
+
+	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl);
+	memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+	mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
+	mpi_request->DevHandle = mpi_reply->DevHandle;
+	sas_device->state |= MPTSAS_STATE_CNTRL_SEND;
+	mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl);
+	return rc;
+}
+
+/**
  * _scsih_check_topo_delete_events - sanity check on topo events
  * @ioc: per adapter object
  * @event_data: the event data payload
@@ -2375,6 +2563,21 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
 	u16 expander_handle;
 	struct _sas_node *sas_expander;
 	unsigned long flags;
+	int i, reason_code;
+	u16 handle;
+
+	for (i = 0 ; i < event_data->NumEntries; i++) {
+		if (event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT)
+			continue;
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
+			_scsih_tm_tr_send(ioc, handle);
+	}
 
 	expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
 	if (expander_handle < ioc->sas_hba.num_phys) {
@@ -2433,8 +2636,8 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
 	u16 smid;
 	u16 count = 0;
 
-	for (smid = 1; smid <= ioc->request_depth; smid++) {
-		scmd = _scsih_scsi_lookup_getclear(ioc, smid);
+	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
+		scmd = _scsih_scsi_lookup_get(ioc, smid);
 		if (!scmd)
 			continue;
 		count++;
@@ -2616,7 +2819,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 	if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON))
 		mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
 
-	smid = mpt2sas_base_get_smid(ioc, ioc->scsi_io_cb_idx);
+	smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
 	if (!smid) {
 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 		    ioc->name, __func__);
@@ -2643,7 +2846,8 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 	mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
 	mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI +
 	    MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR);
-
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
 	int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
 	    mpi_request->LUN);
 	memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
@@ -2657,8 +2861,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 		}
 	}
 
-	_scsih_scsi_lookup_set(ioc, smid, scmd);
-	mpt2sas_base_put_smid_scsi_io(ioc, smid, 0,
+	mpt2sas_base_put_smid_scsi_io(ioc, smid,
 	    sas_device_priv_data->sas_target->handle);
 	return 0;
 
@@ -2954,15 +3157,16 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
  * _scsih_io_done - scsi request callback
  * @ioc: per adapter object
  * @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  *
- * Callback handler when using scsih_qcmd.
+ * Callback handler when using _scsih_qcmd.
  *
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
  */
-static void
-_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+static u8
+_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 {
 	Mpi2SCSIIORequest_t *mpi_request;
 	Mpi2SCSIIOReply_t *mpi_reply;
@@ -2976,9 +3180,9 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 	u32 response_code;
 
 	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	scmd = _scsih_scsi_lookup_getclear(ioc, smid);
+	scmd = _scsih_scsi_lookup_get(ioc, smid);
 	if (scmd == NULL)
-		return;
+		return 1;
 
 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 
@@ -3134,6 +3338,7 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
  out:
 	scsi_dma_unmap(scmd);
 	scmd->scsi_done(scmd);
+	return 1;
 }
 
 /**
@@ -3398,9 +3603,8 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 		}
 	}
 
-	sas_address = le64_to_cpu(expander_pg0.SASAddress);
-
 	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_address = le64_to_cpu(expander_pg0.SASAddress);
 	sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
 	    sas_address);
 	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
@@ -3666,6 +3870,12 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	if (ioc->remove_host)
 		goto out;
 
+	if ((sas_device->state & MPTSAS_STATE_TR_COMPLETE)) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip "
+		   "target_reset handle(0x%04x)\n", ioc->name, handle));
+		goto skip_tr;
+	}
+
 	/* Target Reset to flush out all the outstanding IO */
 	device_handle = (sas_device->hidden_raid_component) ?
 	    sas_device->volume_handle : handle;
@@ -3682,6 +3892,13 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 		if (ioc->shost_recovery)
 			goto out;
 	}
+ skip_tr:
+
+	if ((sas_device->state & MPTSAS_STATE_CNTRL_COMPLETE)) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip "
+		   "sas_cntrl handle(0x%04x)\n", ioc->name, handle));
+		goto out;
+	}
 
 	/* SAS_IO_UNIT_CNTR - send REMOVE_DEVICE */
 	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: handle"
@@ -3690,7 +3907,8 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
 	mpi_request.Operation = MPI2_SAS_OP_REMOVE_DEVICE;
 	mpi_request.DevHandle = handle;
-	mpi_request.VF_ID = 0;
+	mpi_request.VF_ID = 0; /* TODO */
+	mpi_request.VP_ID = 0;
 	if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply,
 	    &mpi_request)) != 0) {
 		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
@@ -3800,15 +4018,12 @@ _scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
 /**
  * _scsih_sas_topology_change_event - handle topology changes
  * @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
- * fw_event:
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  */
 static void
-_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-    Mpi2EventDataSasTopologyChangeList_t *event_data,
+_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
     struct fw_event_work *fw_event)
 {
 	int i;
@@ -3818,6 +4033,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	struct _sas_node *sas_expander;
 	unsigned long flags;
 	u8 link_rate_;
+	Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data;
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
@@ -3851,15 +4067,16 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 		}
 		if (ioc->shost_recovery)
 			return;
-		if (event_data->PHY[i].PhyStatus &
-		    MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT)
+		phy_number = event_data->StartPhyNum + i;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if ((event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
+		    MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
 			continue;
 		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
 		if (!handle)
 			continue;
-		phy_number = event_data->StartPhyNum + i;
-		reason_code = event_data->PHY[i].PhyStatus &
-		    MPI2_EVENT_SAS_TOPO_RC_MASK;
 		link_rate_ = event_data->PHY[i].LinkRate >> 4;
 		switch (reason_code) {
 		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
@@ -3971,19 +4188,19 @@ _scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
 /**
  * _scsih_sas_device_status_change_event - handle device status change
  * @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  * Return nothing.
  */
 static void
-_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-    Mpi2EventDataSasDeviceStatusChange_t *event_data)
+_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
+    struct fw_event_work *fw_event)
 {
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
-		_scsih_sas_device_status_change_event_debug(ioc, event_data);
+		_scsih_sas_device_status_change_event_debug(ioc,
+		     fw_event->event_data);
 #endif
 }
 
@@ -4026,34 +4243,33 @@ _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
 /**
  * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
  * @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  * Return nothing.
  */
 static void
 _scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc,
-    u8 VF_ID, Mpi2EventDataSasEnclDevStatusChange_t *event_data)
+    struct fw_event_work *fw_event)
 {
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
 		_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
-		     event_data);
+		     fw_event->event_data);
 #endif
 }
 
 /**
  * _scsih_sas_broadcast_primative_event - handle broadcast events
  * @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  * Return nothing.
  */
 static void
-_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-    Mpi2EventDataSasBroadcastPrimitive_t *event_data)
+_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
+    struct fw_event_work *fw_event)
 {
 	struct scsi_cmnd *scmd;
 	u16 smid, handle;
@@ -4062,11 +4278,12 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	u32 termination_count;
 	u32 query_count;
 	Mpi2SCSITaskManagementReply_t *mpi_reply;
-
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+	Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data;
+#endif
 	dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: "
 	    "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
 	    event_data->PortWidth));
-
 	dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
 	    __func__));
 
@@ -4074,7 +4291,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	termination_count = 0;
 	query_count = 0;
 	mpi_reply = ioc->tm_cmds.reply;
-	for (smid = 1; smid <= ioc->request_depth; smid++) {
+	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
 		scmd = _scsih_scsi_lookup_get(ioc, smid);
 		if (!scmd)
 			continue;
@@ -4121,23 +4338,25 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 /**
  * _scsih_sas_discovery_event - handle discovery events
  * @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  * Return nothing.
  */
 static void
-_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-    Mpi2EventDataSasDiscovery_t *event_data)
+_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc,
+    struct fw_event_work *fw_event)
 {
+	Mpi2EventDataSasDiscovery_t *event_data = fw_event->event_data;
+
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
 		printk(MPT2SAS_DEBUG_FMT "discovery event: (%s)", ioc->name,
 		    (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
 		    "start" : "stop");
 	if (event_data->DiscoveryStatus)
-		printk(MPT2SAS_DEBUG_FMT ", discovery_status(0x%08x)",
-		    ioc->name, le32_to_cpu(event_data->DiscoveryStatus));
+		printk("discovery_status(0x%08x)",
+		    le32_to_cpu(event_data->DiscoveryStatus));
 	printk("\n");
 	}
 #endif
@@ -4488,19 +4707,19 @@ _scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
 /**
  * _scsih_sas_ir_config_change_event - handle ir configuration change events
  * @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  * Return nothing.
  */
 static void
-_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-    Mpi2EventDataIrConfigChangeList_t *event_data)
+_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
+    struct fw_event_work *fw_event)
 {
 	Mpi2EventIrConfigElement_t *element;
 	int i;
 	u8 foreign_config;
+	Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data;
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
@@ -4543,14 +4762,14 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 /**
  * _scsih_sas_ir_volume_event - IR volume event
  * @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  * Return nothing.
  */
 static void
-_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-    Mpi2EventDataIrVolume_t *event_data)
+_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc,
+    struct fw_event_work *fw_event)
 {
 	u64 wwid;
 	unsigned long flags;
@@ -4559,6 +4778,7 @@ _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	u32 state;
 	int rc;
 	struct MPT2SAS_TARGET *sas_target_priv_data;
+	Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
 
 	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
 		return;
@@ -4628,14 +4848,14 @@ _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 /**
  * _scsih_sas_ir_physical_disk_event - PD event
  * @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  * Return nothing.
  */
 static void
-_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-   Mpi2EventDataIrPhysicalDisk_t *event_data)
+_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
+    struct fw_event_work *fw_event)
 {
 	u16 handle;
 	u32 state;
@@ -4644,6 +4864,7 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	Mpi2ConfigReply_t mpi_reply;
 	Mpi2SasDevicePage0_t sas_device_pg0;
 	u32 ioc_status;
+	Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
 
 	if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
 		return;
@@ -4743,33 +4964,33 @@ _scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc,
 /**
  * _scsih_sas_ir_operation_status_event - handle RAID operation events
  * @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  * Return nothing.
  */
 static void
-_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-    Mpi2EventDataIrOperationStatus_t *event_data)
+_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
+    struct fw_event_work *fw_event)
 {
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
-		_scsih_sas_ir_operation_status_event_debug(ioc, event_data);
+		_scsih_sas_ir_operation_status_event_debug(ioc,
+		     fw_event->event_data);
 #endif
 }
 
 /**
  * _scsih_task_set_full - handle task set full
  * @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
  * Context: user.
  *
  * Throttle back qdepth.
  */
 static void
-_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
-    Mpi2EventDataTaskSetFull_t *event_data)
+_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
+	*fw_event)
 {
 	unsigned long flags;
 	struct _sas_device *sas_device;
@@ -4780,6 +5001,7 @@ _scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	u16 handle;
 	int id, channel;
 	u64 sas_address;
+	Mpi2EventDataTaskSetFull_t *event_data = fw_event->event_data;
 
 	current_depth = le16_to_cpu(event_data->CurrentDepth);
 	handle = le16_to_cpu(event_data->DevHandle);
@@ -4868,6 +5090,10 @@ _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
 		if (sas_device->sas_address == sas_address &&
 		    sas_device->slot == slot && sas_device->starget) {
 			sas_device->responding = 1;
+			sas_device->state = 0;
+			starget = sas_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->tm_busy = 0;
 			starget_printk(KERN_INFO, sas_device->starget,
 			    "handle(0x%04x), sas_addr(0x%016llx), enclosure "
 			    "logical id(0x%016llx), slot(%d)\n", handle,
@@ -4880,8 +5106,6 @@ _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
 			printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
 			    sas_device->handle);
 			sas_device->handle = handle;
-			starget = sas_device->starget;
-			sas_target_priv_data = starget->hostdata;
 			sas_target_priv_data->handle = handle;
 			goto out;
 		}
@@ -5227,44 +5451,38 @@ _firmware_event_work(struct work_struct *work)
 
 	switch (fw_event->event) {
 	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
-		_scsih_sas_topology_change_event(ioc, fw_event->VF_ID,
-		    fw_event->event_data, fw_event);
+		_scsih_sas_topology_change_event(ioc, fw_event);
 		break;
 	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
-		_scsih_sas_device_status_change_event(ioc, fw_event->VF_ID,
-		    fw_event->event_data);
+		_scsih_sas_device_status_change_event(ioc,
+		    fw_event);
 		break;
 	case MPI2_EVENT_SAS_DISCOVERY:
-		_scsih_sas_discovery_event(ioc, fw_event->VF_ID,
-		    fw_event->event_data);
+		_scsih_sas_discovery_event(ioc,
+		    fw_event);
 		break;
 	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
-		_scsih_sas_broadcast_primative_event(ioc, fw_event->VF_ID,
-		    fw_event->event_data);
+		_scsih_sas_broadcast_primative_event(ioc,
+		    fw_event);
 		break;
 	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
 		_scsih_sas_enclosure_dev_status_change_event(ioc,
-		    fw_event->VF_ID, fw_event->event_data);
+		    fw_event);
 		break;
 	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
-		_scsih_sas_ir_config_change_event(ioc, fw_event->VF_ID,
-		    fw_event->event_data);
+		_scsih_sas_ir_config_change_event(ioc, fw_event);
 		break;
 	case MPI2_EVENT_IR_VOLUME:
-		_scsih_sas_ir_volume_event(ioc, fw_event->VF_ID,
-		    fw_event->event_data);
+		_scsih_sas_ir_volume_event(ioc, fw_event);
 		break;
 	case MPI2_EVENT_IR_PHYSICAL_DISK:
-		_scsih_sas_ir_physical_disk_event(ioc, fw_event->VF_ID,
-		    fw_event->event_data);
+		_scsih_sas_ir_physical_disk_event(ioc, fw_event);
 		break;
 	case MPI2_EVENT_IR_OPERATION_STATUS:
-		_scsih_sas_ir_operation_status_event(ioc, fw_event->VF_ID,
-		    fw_event->event_data);
+		_scsih_sas_ir_operation_status_event(ioc, fw_event);
 		break;
 	case MPI2_EVENT_TASK_SET_FULL:
-		_scsih_task_set_full(ioc, fw_event->VF_ID,
-		    fw_event->event_data);
+		_scsih_task_set_full(ioc, fw_event);
 		break;
 	}
 	_scsih_fw_event_free(ioc, fw_event);
@@ -5273,17 +5491,19 @@ _firmware_event_work(struct work_struct *work)
 /**
  * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time)
  * @ioc: per adapter object
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  * Context: interrupt.
  *
  * This function merely adds a new work task into ioc->firmware_event_thread.
  * The tasks are worked from _firmware_event_work in user context.
  *
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
  */
-void
-mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
+u8
+mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply)
 {
 	struct fw_event_work *fw_event;
 	Mpi2EventNotificationReply_t *mpi_reply;
@@ -5294,11 +5514,11 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
 	spin_lock_irqsave(&ioc->fw_event_lock, flags);
 	if (ioc->fw_events_off || ioc->remove_host) {
 		spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-		return;
+		return 1;
 	}
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 
-	mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
+	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	event = le16_to_cpu(mpi_reply->Event);
 
 	switch (event) {
@@ -5312,7 +5532,7 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
 		if (baen_data->Primitive !=
 		    MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT ||
 		    ioc->broadcast_aen_busy)
-			return;
+			return 1;
 		ioc->broadcast_aen_busy = 1;
 		break;
 	}
@@ -5334,14 +5554,14 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
 		break;
 
 	default: /* ignore the rest */
-		return;
+		return 1;
 	}
 
 	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
 	if (!fw_event) {
 		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
+		return 1;
 	}
 	fw_event->event_data =
 	    kzalloc(mpi_reply->EventDataLength*4, GFP_ATOMIC);
@@ -5349,15 +5569,17 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
 		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);
 		kfree(fw_event);
-		return;
+		return 1;
 	}
 
 	memcpy(fw_event->event_data, mpi_reply->EventData,
 	    mpi_reply->EventDataLength*4);
 	fw_event->ioc = ioc;
-	fw_event->VF_ID = VF_ID;
+	fw_event->VF_ID = mpi_reply->VF_ID;
+	fw_event->VP_ID = mpi_reply->VP_ID;
 	fw_event->event = event;
 	_scsih_fw_event_add(ioc, fw_event);
+	return 1;
 }
 
 /* shost template */
@@ -5617,7 +5839,7 @@ _scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
- * _scsih_probe_sas - reporting raid volumes to sas transport
+ * _scsih_probe_sas - reporting sas devices to sas transport
  * @ioc: per adapter object
  *
  * Called during initial loading of the driver.
@@ -5714,6 +5936,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	ioc->base_cb_idx = base_cb_idx;
 	ioc->transport_cb_idx = transport_cb_idx;
 	ioc->config_cb_idx = config_cb_idx;
+	ioc->tm_tr_cb_idx = tm_tr_cb_idx;
+	ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
 	ioc->logging_level = logging_level;
 	/* misc semaphores and spin locks */
 	spin_lock_init(&ioc->ioc_reset_in_progress_lock);
@@ -5729,6 +5953,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	INIT_LIST_HEAD(&ioc->fw_event_list);
 	INIT_LIST_HEAD(&ioc->raid_device_list);
 	INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
+	INIT_LIST_HEAD(&ioc->delayed_tr_list);
 
 	/* init shost parameters */
 	shost->max_cmd_len = 16;
@@ -5745,6 +5970,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
 	    | SHOST_DIF_TYPE3_PROTECTION);
+	scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
 
 	/* event thread */
 	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
@@ -5894,6 +6120,11 @@ _scsih_init(void)
 	/* ctl module callback handler */
 	ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done);
 
+	tm_tr_cb_idx = mpt2sas_base_register_callback_handler(
+	    _scsih_tm_tr_complete);
+	tm_sas_control_cb_idx = mpt2sas_base_register_callback_handler(
+	    _scsih_sas_control_complete);
+
 	mpt2sas_ctl_init();
 
 	error = pci_register_driver(&scsih_driver);
@@ -5924,6 +6155,9 @@ _scsih_exit(void)
 	mpt2sas_base_release_callback_handler(config_cb_idx);
 	mpt2sas_base_release_callback_handler(ctl_cb_idx);
 
+	mpt2sas_base_release_callback_handler(tm_tr_cb_idx);
+	mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx);
+
 	mpt2sas_ctl_exit();
 }
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 742324a0a11e..eb98188c7f3f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -2,7 +2,7 @@
  * SAS Transport Layer for MPT (Message Passing Technology) based controllers
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c
- * Copyright (C) 2007-2008  LSI Corporation
+ * Copyright (C) 2007-2009  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -212,25 +212,26 @@ _transport_set_identify(struct MPT2SAS_ADAPTER *ioc, u16 handle,
  * mpt2sas_transport_done -  internal transport layer callback handler.
  * @ioc: per adapter object
  * @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
  * @reply: reply message frame(lower 32bit addr)
  *
  * Callback handler when sending internal generated transport cmds.
  * The callback index passed is `ioc->transport_cb_idx`
  *
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
  */
-void
-mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
+u8
+mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
     u32 reply)
 {
 	MPI2DefaultReply_t *mpi_reply;
 
 	mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	if (ioc->transport_cmds.status == MPT2_CMD_NOT_USED)
-		return;
+		return 1;
 	if (ioc->transport_cmds.smid != smid)
-		return;
+		return 1;
 	ioc->transport_cmds.status |= MPT2_CMD_COMPLETE;
 	if (mpi_reply) {
 		memcpy(ioc->transport_cmds.reply, mpi_reply,
@@ -239,6 +240,7 @@ mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
 	}
 	ioc->transport_cmds.status &= ~MPT2_CMD_PENDING;
 	complete(&ioc->transport_cmds.done);
+	return 1;
 }
 
 /* report manufacture request structure */
@@ -369,6 +371,8 @@ _transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
 	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
 	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
 	mpi_request->PhysicalPort = 0xFF;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
 	sas_address_le = (u64 *)&mpi_request->SASAddress;
 	*sas_address_le = cpu_to_le64(sas_address);
 	mpi_request->RequestDataLength = sizeof(struct rep_manu_request);
@@ -396,7 +400,8 @@ _transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
 	dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - "
 	    "send to sas_addr(0x%016llx)\n", ioc->name,
 	    (unsigned long long)sas_address));
-	mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */);
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->transport_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
 	    10*HZ);
 
@@ -1106,6 +1111,8 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
 	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
 	mpi_request->PhysicalPort = 0xFF;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
 	*((u64 *)&mpi_request->SASAddress) = (rphy) ?
 	    cpu_to_le64(rphy->identify.sas_address) :
 	    cpu_to_le64(ioc->sas_hba.sas_address);
@@ -1147,7 +1154,8 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - "
 	    "sending smp request\n", ioc->name, __func__));
 
-	mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */);
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->transport_cmds.done);
 	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
 	    10*HZ);
 
diff --git a/drivers/scsi/mvsas/mv_defs.h b/drivers/scsi/mvsas/mv_defs.h
index f8cb9defb961..1849da1f030d 100644
--- a/drivers/scsi/mvsas/mv_defs.h
+++ b/drivers/scsi/mvsas/mv_defs.h
@@ -25,6 +25,8 @@
 #ifndef _MV_DEFS_H_
 #define _MV_DEFS_H_
 
+#define PCI_DEVICE_ID_ARECA_1300	0x1300
+#define PCI_DEVICE_ID_ARECA_1320	0x1320
 
 enum chip_flavors {
 	chip_6320,
@@ -32,6 +34,8 @@ enum chip_flavors {
 	chip_6485,
 	chip_9480,
 	chip_9180,
+	chip_1300,
+	chip_1320
 };
 
 /* driver compile-time configuration */
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 8646a19f999d..c790d45876c4 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -32,6 +32,8 @@ static const struct mvs_chip_info mvs_chips[] = {
 	[chip_6485] =	{ 1, 8, 0x800, 33, 32, 10, &mvs_64xx_dispatch, },
 	[chip_9180] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
 	[chip_9480] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
+	[chip_1300] =	{ 1, 4, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
+	[chip_1320] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
 };
 
 #define SOC_SAS_NUM 2
@@ -653,6 +655,8 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = {
 	{ PCI_VDEVICE(MARVELL, 0x6485), chip_6485 },
 	{ PCI_VDEVICE(MARVELL, 0x9480), chip_9480 },
 	{ PCI_VDEVICE(MARVELL, 0x9180), chip_9180 },
+	{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 },
+	{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 },
 
 	{ }	/* terminate list */
 };
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 4302f06e4ec9..f7c70e2a8224 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -46,6 +46,7 @@
 #include <linux/mutex.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_cmnd.h>
@@ -684,7 +685,7 @@ static void pmcraid_timeout_handler(struct pmcraid_cmd *cmd)
 	struct pmcraid_instance *pinstance = cmd->drv_inst;
 	unsigned long lock_flags;
 
-	dev_err(&pinstance->pdev->dev,
+	dev_info(&pinstance->pdev->dev,
 		"Adapter being reset due to command timeout.\n");
 
 	/* Command timeouts result in hard reset sequence. The command that got
@@ -815,8 +816,9 @@ static void pmcraid_erp_done(struct pmcraid_cmd *cmd)
 
 	if (PMCRAID_IOASC_SENSE_KEY(ioasc) > 0) {
 		scsi_cmd->result |= (DID_ERROR << 16);
-		pmcraid_err("command CDB[0] = %x failed with IOASC: 0x%08X\n",
-			     cmd->ioa_cb->ioarcb.cdb[0], ioasc);
+		scmd_printk(KERN_INFO, scsi_cmd,
+			    "command CDB[0] = %x failed with IOASC: 0x%08X\n",
+			    cmd->ioa_cb->ioarcb.cdb[0], ioasc);
 	}
 
 	/* if we had allocated sense buffers for request sense, copy the sense
@@ -1541,13 +1543,13 @@ static void pmcraid_handle_error_log(struct pmcraid_instance *pinstance)
 
 	if (pinstance->ldn.hcam->notification_lost ==
 	    HOSTRCB_NOTIFICATIONS_LOST)
-		dev_err(&pinstance->pdev->dev, "Error notifications lost\n");
+		dev_info(&pinstance->pdev->dev, "Error notifications lost\n");
 
 	ioasc = le32_to_cpu(hcam_ldn->error_log.fd_ioasc);
 
 	if (ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET ||
 		ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER) {
-		dev_err(&pinstance->pdev->dev,
+		dev_info(&pinstance->pdev->dev,
 			"UnitAttention due to IOA Bus Reset\n");
 		scsi_report_bus_reset(
 			pinstance->host,
@@ -1584,7 +1586,7 @@ static void pmcraid_process_ccn(struct pmcraid_cmd *cmd)
 	    atomic_read(&pinstance->ccn.ignore) == 1) {
 		return;
 	} else if (ioasc) {
-		dev_err(&pinstance->pdev->dev,
+		dev_info(&pinstance->pdev->dev,
 			"Host RCB (CCN) failed with IOASC: 0x%08X\n", ioasc);
 		spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
 		pmcraid_send_hcam(pinstance, PMCRAID_HCAM_CODE_CONFIG_CHANGE);
@@ -1634,7 +1636,7 @@ static void pmcraid_process_ldn(struct pmcraid_cmd *cmd)
 			return;
 		}
 	} else {
-		dev_err(&pinstance->pdev->dev,
+		dev_info(&pinstance->pdev->dev,
 			"Host RCB(LDN) failed with IOASC: 0x%08X\n", ioasc);
 	}
 	/* send netlink message for HCAM notification if enabled */
@@ -1822,7 +1824,6 @@ static void pmcraid_fail_outstanding_cmds(struct pmcraid_instance *pinstance)
 			scsi_dma_unmap(scsi_cmd);
 			pmcraid_return_cmd(cmd);
 
-
 			pmcraid_info("failing(%d) CDB[0] = %x result: %x\n",
 				     le32_to_cpu(resp) >> 2,
 				     cmd->ioa_cb->ioarcb.cdb[0],
@@ -2514,7 +2515,8 @@ static int pmcraid_reset_device(
 	res = scsi_cmd->device->hostdata;
 
 	if (!res) {
-		pmcraid_err("reset_device: NULL resource pointer\n");
+		sdev_printk(KERN_ERR, scsi_cmd->device,
+			    "reset_device: NULL resource pointer\n");
 		return FAILED;
 	}
 
@@ -2752,8 +2754,8 @@ static int pmcraid_eh_abort_handler(struct scsi_cmnd *scsi_cmd)
 	pinstance =
 		(struct pmcraid_instance *)scsi_cmd->device->host->hostdata;
 
-	dev_err(&pinstance->pdev->dev,
-		"I/O command timed out, aborting it.\n");
+	scmd_printk(KERN_INFO, scsi_cmd,
+		    "I/O command timed out, aborting it.\n");
 
 	res = scsi_cmd->device->hostdata;
 
@@ -2824,7 +2826,8 @@ static int pmcraid_eh_abort_handler(struct scsi_cmnd *scsi_cmd)
  */
 static int pmcraid_eh_device_reset_handler(struct scsi_cmnd *scmd)
 {
-	pmcraid_err("Doing device reset due to an I/O command timeout.\n");
+	scmd_printk(KERN_INFO, scmd,
+		    "resetting device due to an I/O command timeout.\n");
 	return pmcraid_reset_device(scmd,
 				    PMCRAID_INTERNAL_TIMEOUT,
 				    RESET_DEVICE_LUN);
@@ -2832,7 +2835,8 @@ static int pmcraid_eh_device_reset_handler(struct scsi_cmnd *scmd)
 
 static int pmcraid_eh_bus_reset_handler(struct scsi_cmnd *scmd)
 {
-	pmcraid_err("Doing bus reset due to an I/O command timeout.\n");
+	scmd_printk(KERN_INFO, scmd,
+		    "Doing bus reset due to an I/O command timeout.\n");
 	return pmcraid_reset_device(scmd,
 				    PMCRAID_RESET_BUS_TIMEOUT,
 				    RESET_DEVICE_BUS);
@@ -2840,7 +2844,8 @@ static int pmcraid_eh_bus_reset_handler(struct scsi_cmnd *scmd)
 
 static int pmcraid_eh_target_reset_handler(struct scsi_cmnd *scmd)
 {
-	pmcraid_err("Doing target reset due to an I/O command timeout.\n");
+	scmd_printk(KERN_INFO, scmd,
+		    "Doing target reset due to an I/O command timeout.\n");
 	return pmcraid_reset_device(scmd,
 				    PMCRAID_INTERNAL_TIMEOUT,
 				    RESET_DEVICE_TARGET);
@@ -2988,11 +2993,11 @@ static int pmcraid_build_ioadl(
 	nseg = scsi_dma_map(scsi_cmd);
 
 	if (nseg < 0) {
-		dev_err(&pinstance->pdev->dev, "scsi_map_dma failed!\n");
+		scmd_printk(KERN_ERR, scsi_cmd, "scsi_map_dma failed!\n");
 		return -1;
 	} else if (nseg > PMCRAID_MAX_IOADLS) {
 		scsi_dma_unmap(scsi_cmd);
-		dev_err(&pinstance->pdev->dev,
+		scmd_printk(KERN_ERR, scsi_cmd,
 			"sg count is (%d) more than allowed!\n", nseg);
 		return -1;
 	}
@@ -5040,7 +5045,7 @@ static int pmcraid_resume(struct pci_dev *pdev)
 	rc = pci_enable_device(pdev);
 
 	if (rc) {
-		pmcraid_err("pmcraid: Enable device failed\n");
+		dev_err(&pdev->dev, "resume: Enable device failed\n");
 		return rc;
 	}
 
@@ -5054,7 +5059,7 @@ static int pmcraid_resume(struct pci_dev *pdev)
 		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 
 	if (rc != 0) {
-		dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
+		dev_err(&pdev->dev, "resume: Failed to set PCI DMA mask\n");
 		goto disable_device;
 	}
 
@@ -5063,7 +5068,8 @@ static int pmcraid_resume(struct pci_dev *pdev)
 	rc = pmcraid_register_interrupt_handler(pinstance);
 
 	if (rc) {
-		pmcraid_err("resume: couldn't register interrupt handlers\n");
+		dev_err(&pdev->dev,
+			"resume: couldn't register interrupt handlers\n");
 		rc = -ENODEV;
 		goto release_host;
 	}
@@ -5080,7 +5086,7 @@ static int pmcraid_resume(struct pci_dev *pdev)
 	 * state.
 	 */
 	if (pmcraid_reset_bringup(pinstance)) {
-		pmcraid_err("couldn't initialize IOA \n");
+		dev_err(&pdev->dev, "couldn't initialize IOA \n");
 		rc = -ENODEV;
 		goto release_tasklets;
 	}
@@ -5187,7 +5193,7 @@ static void pmcraid_init_res_table(struct pmcraid_cmd *cmd)
 	LIST_HEAD(old_res);
 
 	if (pinstance->cfg_table->flags & MICROCODE_UPDATE_REQUIRED)
-		dev_err(&pinstance->pdev->dev, "Require microcode download\n");
+		pmcraid_err("IOA requires microcode download\n");
 
 	/* resource list is protected by pinstance->resource_lock.
 	 * init_res_table can be called from probe (user-thread) or runtime
@@ -5224,8 +5230,7 @@ static void pmcraid_init_res_table(struct pmcraid_cmd *cmd)
 		if (!found) {
 
 			if (list_empty(&pinstance->free_res_q)) {
-				dev_err(&pinstance->pdev->dev,
-					"Too many devices attached\n");
+				pmcraid_err("Too many devices attached\n");
 				break;
 			}
 
@@ -5442,7 +5447,7 @@ static int __devinit pmcraid_probe(
 	rc = pmcraid_register_interrupt_handler(pinstance);
 
 	if (rc) {
-		pmcraid_err("couldn't register interrupt handler\n");
+		dev_err(&pdev->dev, "couldn't register interrupt handler\n");
 		goto out_scsi_host_put;
 	}
 
@@ -5466,7 +5471,7 @@ static int __devinit pmcraid_probe(
 	 */
 	pmcraid_info("starting IOA initialization sequence\n");
 	if (pmcraid_reset_bringup(pinstance)) {
-		pmcraid_err("couldn't initialize IOA \n");
+		dev_err(&pdev->dev, "couldn't initialize IOA \n");
 		rc = 1;
 		goto out_release_bufs;
 	}
@@ -5534,7 +5539,6 @@ static struct pci_driver pmcraid_driver = {
 	.shutdown = pmcraid_shutdown
 };
 
-
 /**
  * pmcraid_init - module load entry point
  */
@@ -5566,7 +5570,6 @@ static int __init pmcraid_init(void)
 		goto out_unreg_chrdev;
 	}
 
-
 	error = pmcraid_netlink_init();
 
 	if (error)
@@ -5584,6 +5587,7 @@ static int __init pmcraid_init(void)
 
 out_unreg_chrdev:
 	unregister_chrdev_region(MKDEV(pmcraid_major, 0), PMCRAID_MAX_ADAPTERS);
+
 out_init:
 	return error;
 }
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 42b799abba57..e07b3617f019 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -568,7 +568,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 	if (req == NULL) {
 		qla_printk(KERN_WARNING, ha, "could not allocate memory"
 			"for request que\n");
-		goto que_failed;
+		goto failed;
 	}
 
 	req->length = REQUEST_ENTRY_CNT_24XX;
@@ -632,6 +632,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 
 que_failed:
 	qla25xx_free_req_que(base_vha, req);
+failed:
 	return 0;
 }
 
@@ -659,7 +660,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 	if (rsp == NULL) {
 		qla_printk(KERN_WARNING, ha, "could not allocate memory for"
 				" response que\n");
-		goto que_failed;
+		goto failed;
 	}
 
 	rsp->length = RESPONSE_ENTRY_CNT_MQ;
@@ -728,6 +729,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 
 que_failed:
 	qla25xx_free_rsp_que(base_vha, rsp);
+failed:
 	return 0;
 }
 
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index b6e03074cb8f..dd098cad337b 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -241,10 +241,7 @@ scsi_host_alloc_command(struct Scsi_Host *shost, gfp_t gfp_mask)
  */
 struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask)
 {
-	struct scsi_cmnd *cmd;
-	unsigned char *buf;
-
-	cmd = scsi_host_alloc_command(shost, gfp_mask);
+	struct scsi_cmnd *cmd = scsi_host_alloc_command(shost, gfp_mask);
 
 	if (unlikely(!cmd)) {
 		unsigned long flags;
@@ -258,9 +255,15 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask)
 		spin_unlock_irqrestore(&shost->free_list_lock, flags);
 
 		if (cmd) {
+			void *buf, *prot;
+
 			buf = cmd->sense_buffer;
+			prot = cmd->prot_sdb;
+
 			memset(cmd, 0, sizeof(*cmd));
+
 			cmd->sense_buffer = buf;
+			cmd->prot_sdb = prot;
 		}
 	}
 
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index fb9af207d61d..c4103bef41b5 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -50,6 +50,7 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsicam.h>
 #include <scsi/scsi_eh.h>
+#include <scsi/scsi_dbg.h>
 
 #include "sd.h"
 #include "scsi_logging.h"
@@ -64,6 +65,7 @@ static const char * scsi_debug_version_date = "20070104";
 #define PARAMETER_LIST_LENGTH_ERR 0x1a
 #define INVALID_OPCODE 0x20
 #define ADDR_OUT_OF_RANGE 0x21
+#define INVALID_COMMAND_OPCODE 0x20
 #define INVALID_FIELD_IN_CDB 0x24
 #define INVALID_FIELD_IN_PARAM_LIST 0x26
 #define POWERON_RESET 0x29
@@ -180,7 +182,7 @@ static int sdebug_sectors_per;		/* sectors per cylinder */
 #define SDEBUG_SENSE_LEN 32
 
 #define SCSI_DEBUG_CANQUEUE  255
-#define SCSI_DEBUG_MAX_CMD_LEN 16
+#define SCSI_DEBUG_MAX_CMD_LEN 32
 
 struct sdebug_dev_info {
 	struct list_head dev_list;
@@ -296,9 +298,25 @@ static void mk_sense_buffer(struct sdebug_dev_info *devip, int key,
 }
 
 static void get_data_transfer_info(unsigned char *cmd,
-				   unsigned long long *lba, unsigned int *num)
+				   unsigned long long *lba, unsigned int *num,
+				   u32 *ei_lba)
 {
+	*ei_lba = 0;
+
 	switch (*cmd) {
+	case VARIABLE_LENGTH_CMD:
+		*lba = (u64)cmd[19] | (u64)cmd[18] << 8 |
+			(u64)cmd[17] << 16 | (u64)cmd[16] << 24 |
+			(u64)cmd[15] << 32 | (u64)cmd[14] << 40 |
+			(u64)cmd[13] << 48 | (u64)cmd[12] << 56;
+
+		*ei_lba = (u32)cmd[23] | (u32)cmd[22] << 8 |
+			(u32)cmd[21] << 16 | (u32)cmd[20] << 24;
+
+		*num = (u32)cmd[31] | (u32)cmd[30] << 8 | (u32)cmd[29] << 16 |
+			(u32)cmd[28] << 24;
+		break;
+
 	case WRITE_16:
 	case READ_16:
 		*lba = (u64)cmd[9] | (u64)cmd[8] << 8 |
@@ -1589,7 +1607,7 @@ static int do_device_access(struct scsi_cmnd *scmd,
 }
 
 static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec,
-			    unsigned int sectors)
+			    unsigned int sectors, u32 ei_lba)
 {
 	unsigned int i, resid;
 	struct scatterlist *psgl;
@@ -1636,13 +1654,23 @@ static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec,
 			return 0x01;
 		}
 
-		if (scsi_debug_dif != SD_DIF_TYPE3_PROTECTION &&
+		if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
 		    be32_to_cpu(sdt[i].ref_tag) != (sector & 0xffffffff)) {
 			printk(KERN_ERR "%s: REF check failed on sector %lu\n",
 			       __func__, (unsigned long)sector);
 			dif_errors++;
 			return 0x03;
 		}
+
+		if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+		    be32_to_cpu(sdt[i].ref_tag) != ei_lba) {
+			printk(KERN_ERR "%s: REF check failed on sector %lu\n",
+			       __func__, (unsigned long)sector);
+			dif_errors++;
+			return 0x03;
+		}
+
+		ei_lba++;
 	}
 
 	resid = sectors * 8; /* Bytes of protection data to copy into sgl */
@@ -1670,7 +1698,8 @@ static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec,
 }
 
 static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba,
-		     unsigned int num, struct sdebug_dev_info *devip)
+		     unsigned int num, struct sdebug_dev_info *devip,
+		     u32 ei_lba)
 {
 	unsigned long iflags;
 	int ret;
@@ -1699,7 +1728,7 @@ static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba,
 
 	/* DIX + T10 DIF */
 	if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) {
-		int prot_ret = prot_verify_read(SCpnt, lba, num);
+		int prot_ret = prot_verify_read(SCpnt, lba, num, ei_lba);
 
 		if (prot_ret) {
 			mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, prot_ret);
@@ -1735,7 +1764,7 @@ void dump_sector(unsigned char *buf, int len)
 }
 
 static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec,
-			     unsigned int sectors)
+			     unsigned int sectors, u32 ei_lba)
 {
 	int i, j, ret;
 	struct sd_dif_tuple *sdt;
@@ -1749,11 +1778,6 @@ static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec,
 
 	sector = do_div(tmp_sec, sdebug_store_sectors);
 
-	if (((SCpnt->cmnd[1] >> 5) & 7) != 1) {
-		printk(KERN_WARNING "scsi_debug: WRPROTECT != 1\n");
-		return 0;
-	}
-
 	BUG_ON(scsi_sg_count(SCpnt) == 0);
 	BUG_ON(scsi_prot_sg_count(SCpnt) == 0);
 
@@ -1808,7 +1832,7 @@ static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec,
 				goto out;
 			}
 
-			if (scsi_debug_dif != SD_DIF_TYPE3_PROTECTION &&
+			if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
 			    be32_to_cpu(sdt->ref_tag)
 			    != (start_sec & 0xffffffff)) {
 				printk(KERN_ERR
@@ -1819,6 +1843,16 @@ static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec,
 				goto out;
 			}
 
+			if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+			    be32_to_cpu(sdt->ref_tag) != ei_lba) {
+				printk(KERN_ERR
+				       "%s: REF check failed on sector %lu\n",
+				       __func__, (unsigned long)sector);
+				ret = 0x03;
+				dump_sector(daddr, scsi_debug_sector_size);
+				goto out;
+			}
+
 			/* Would be great to copy this in bigger
 			 * chunks.  However, for the sake of
 			 * correctness we need to verify each sector
@@ -1832,6 +1866,7 @@ static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec,
 				sector = 0;	/* Force wrap */
 
 			start_sec++;
+			ei_lba++;
 			daddr += scsi_debug_sector_size;
 			ppage_offset += sizeof(struct sd_dif_tuple);
 		}
@@ -1853,7 +1888,8 @@ out:
 }
 
 static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba,
-		      unsigned int num, struct sdebug_dev_info *devip)
+		      unsigned int num, struct sdebug_dev_info *devip,
+		      u32 ei_lba)
 {
 	unsigned long iflags;
 	int ret;
@@ -1864,7 +1900,7 @@ static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba,
 
 	/* DIX + T10 DIF */
 	if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) {
-		int prot_ret = prot_verify_write(SCpnt, lba, num);
+		int prot_ret = prot_verify_write(SCpnt, lba, num, ei_lba);
 
 		if (prot_ret) {
 			mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, prot_ret);
@@ -2872,11 +2908,12 @@ static int __init scsi_debug_init(void)
 
 	case SD_DIF_TYPE0_PROTECTION:
 	case SD_DIF_TYPE1_PROTECTION:
+	case SD_DIF_TYPE2_PROTECTION:
 	case SD_DIF_TYPE3_PROTECTION:
 		break;
 
 	default:
-		printk(KERN_ERR "scsi_debug_init: dif must be 0, 1 or 3\n");
+		printk(KERN_ERR "scsi_debug_init: dif must be 0, 1, 2 or 3\n");
 		return -EINVAL;
 	}
 
@@ -3121,6 +3158,7 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done)
 	int len, k;
 	unsigned int num;
 	unsigned long long lba;
+	u32 ei_lba;
 	int errsts = 0;
 	int target = SCpnt->device->id;
 	struct sdebug_dev_info *devip = NULL;
@@ -3254,14 +3292,30 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done)
 	case READ_16:
 	case READ_12:
 	case READ_10:
+		/* READ{10,12,16} and DIF Type 2 are natural enemies */
+		if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+		    cmd[1] & 0xe0) {
+			mk_sense_buffer(devip, ILLEGAL_REQUEST,
+					INVALID_COMMAND_OPCODE, 0);
+			errsts = check_condition_result;
+			break;
+		}
+
+		if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
+		     scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+		    (cmd[1] & 0xe0) == 0)
+			printk(KERN_ERR "Unprotected RD/WR to DIF device\n");
+
+		/* fall through */
 	case READ_6:
+read:
 		errsts = check_readiness(SCpnt, 0, devip);
 		if (errsts)
 			break;
 		if (scsi_debug_fake_rw)
 			break;
-		get_data_transfer_info(cmd, &lba, &num);
-		errsts = resp_read(SCpnt, lba, num, devip);
+		get_data_transfer_info(cmd, &lba, &num, &ei_lba);
+		errsts = resp_read(SCpnt, lba, num, devip, ei_lba);
 		if (inj_recovered && (0 == errsts)) {
 			mk_sense_buffer(devip, RECOVERED_ERROR,
 					THRESHOLD_EXCEEDED, 0);
@@ -3288,14 +3342,30 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done)
 	case WRITE_16:
 	case WRITE_12:
 	case WRITE_10:
+		/* WRITE{10,12,16} and DIF Type 2 are natural enemies */
+		if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+		    cmd[1] & 0xe0) {
+			mk_sense_buffer(devip, ILLEGAL_REQUEST,
+					INVALID_COMMAND_OPCODE, 0);
+			errsts = check_condition_result;
+			break;
+		}
+
+		if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
+		     scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+		    (cmd[1] & 0xe0) == 0)
+			printk(KERN_ERR "Unprotected RD/WR to DIF device\n");
+
+		/* fall through */
 	case WRITE_6:
+write:
 		errsts = check_readiness(SCpnt, 0, devip);
 		if (errsts)
 			break;
 		if (scsi_debug_fake_rw)
 			break;
-		get_data_transfer_info(cmd, &lba, &num);
-		errsts = resp_write(SCpnt, lba, num, devip);
+		get_data_transfer_info(cmd, &lba, &num, &ei_lba);
+		errsts = resp_write(SCpnt, lba, num, devip, ei_lba);
 		if (inj_recovered && (0 == errsts)) {
 			mk_sense_buffer(devip, RECOVERED_ERROR,
 					THRESHOLD_EXCEEDED, 0);
@@ -3341,15 +3411,38 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done)
 			break;
 		if (scsi_debug_fake_rw)
 			break;
-		get_data_transfer_info(cmd, &lba, &num);
-		errsts = resp_read(SCpnt, lba, num, devip);
+		get_data_transfer_info(cmd, &lba, &num, &ei_lba);
+		errsts = resp_read(SCpnt, lba, num, devip, ei_lba);
 		if (errsts)
 			break;
-		errsts = resp_write(SCpnt, lba, num, devip);
+		errsts = resp_write(SCpnt, lba, num, devip, ei_lba);
 		if (errsts)
 			break;
 		errsts = resp_xdwriteread(SCpnt, lba, num, devip);
 		break;
+	case VARIABLE_LENGTH_CMD:
+		if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION) {
+
+			if ((cmd[10] & 0xe0) == 0)
+				printk(KERN_ERR
+				       "Unprotected RD/WR to DIF device\n");
+
+			if (cmd[9] == READ_32) {
+				BUG_ON(SCpnt->cmd_len < 32);
+				goto read;
+			}
+
+			if (cmd[9] == WRITE_32) {
+				BUG_ON(SCpnt->cmd_len < 32);
+				goto write;
+			}
+		}
+
+		mk_sense_buffer(devip, ILLEGAL_REQUEST,
+				INVALID_FIELD_IN_CDB, 0);
+		errsts = check_condition_result;
+		break;
+
 	default:
 		if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
 			printk(KERN_INFO "scsi_debug: Opcode: 0x%x not "
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 877204daf549..1b0060b791e8 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -725,6 +725,9 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
 		case NEEDS_RETRY:
 		case FAILED:
 			break;
+		case ADD_TO_MLQUEUE:
+			rtn = NEEDS_RETRY;
+			break;
 		default:
 			rtn = FAILED;
 			break;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index c44783801402..0547a7f44d42 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -317,6 +317,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 out_device_destroy:
 	scsi_device_set_state(sdev, SDEV_DEL);
 	transport_destroy_device(&sdev->sdev_gendev);
+	put_device(&sdev->sdev_dev);
 	put_device(&sdev->sdev_gendev);
 out:
 	if (display_failure_msg)
@@ -957,6 +958,7 @@ static inline void scsi_destroy_sdev(struct scsi_device *sdev)
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
 	transport_destroy_device(&sdev->sdev_gendev);
+	put_device(&sdev->sdev_dev);
 	put_device(&sdev->sdev_gendev);
 }
 
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index fde54537d715..5c7eb63a19d1 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -864,10 +864,6 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 		goto clean_device;
 	}
 
-	/* take a reference for the sdev_dev; this is
-	 * released by the sdev_class .release */
-	get_device(&sdev->sdev_gendev);
-
 	/* create queue files, which may be writable, depending on the host */
 	if (sdev->host->hostt->change_queue_depth)
 		error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw);
@@ -917,6 +913,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 
 	device_del(&sdev->sdev_gendev);
 	transport_destroy_device(&sdev->sdev_gendev);
+	put_device(&sdev->sdev_dev);
 	put_device(&sdev->sdev_gendev);
 
 	return error;
@@ -1065,7 +1062,7 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev)
 		     sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
 
 	device_initialize(&sdev->sdev_dev);
-	sdev->sdev_dev.parent = &sdev->sdev_gendev;
+	sdev->sdev_dev.parent = get_device(&sdev->sdev_gendev);
 	sdev->sdev_dev.class = &sdev_class;
 	dev_set_name(&sdev->sdev_dev, "%d:%d:%d:%d",
 		     sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index b98885de6876..a67fed10598a 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3586,6 +3586,7 @@ enum fc_dispatch_result {
 
 /**
  * fc_bsg_host_dispatch - process fc host bsg requests and dispatch to LLDD
+ * @q:		fc host request queue
  * @shost:	scsi host rport attached to
  * @job:	bsg job to be processed
  */
@@ -3693,6 +3694,7 @@ fc_bsg_goose_queue(struct fc_rport *rport)
 
 /**
  * fc_bsg_rport_dispatch - process rport bsg requests and dispatch to LLDD
+ * @q:		rport request queue
  * @shost:	scsi host rport attached to
  * @rport:	rport request destined to
  * @job:	bsg job to be processed
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 8dd96dcd716c..9093c7261f33 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -116,6 +116,9 @@ static DEFINE_IDA(sd_index_ida);
  * object after last put) */
 static DEFINE_MUTEX(sd_ref_mutex);
 
+struct kmem_cache *sd_cdb_cache;
+mempool_t *sd_cdb_pool;
+
 static const char *sd_cache_types[] = {
 	"write through", "none", "write back",
 	"write back, no read (daft)"
@@ -370,6 +373,31 @@ static void scsi_disk_put(struct scsi_disk *sdkp)
 	mutex_unlock(&sd_ref_mutex);
 }
 
+static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
+{
+	unsigned int prot_op = SCSI_PROT_NORMAL;
+	unsigned int dix = scsi_prot_sg_count(scmd);
+
+	if (scmd->sc_data_direction == DMA_FROM_DEVICE) {
+		if (dif && dix)
+			prot_op = SCSI_PROT_READ_PASS;
+		else if (dif && !dix)
+			prot_op = SCSI_PROT_READ_STRIP;
+		else if (!dif && dix)
+			prot_op = SCSI_PROT_READ_INSERT;
+	} else {
+		if (dif && dix)
+			prot_op = SCSI_PROT_WRITE_PASS;
+		else if (dif && !dix)
+			prot_op = SCSI_PROT_WRITE_INSERT;
+		else if (!dif && dix)
+			prot_op = SCSI_PROT_WRITE_STRIP;
+	}
+
+	scsi_set_prot_op(scmd, prot_op);
+	scsi_set_prot_type(scmd, dif);
+}
+
 /**
  *	sd_init_command - build a scsi (read or write) command from
  *	information in the request structure.
@@ -388,6 +416,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	sector_t threshold;
 	unsigned int this_count = blk_rq_sectors(rq);
 	int ret, host_dif;
+	unsigned char protect;
 
 	if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
 		ret = scsi_setup_blk_pc_cmnd(sdp, rq);
@@ -520,13 +549,49 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
 	host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
 	if (host_dif)
-		SCpnt->cmnd[1] = 1 << 5;
+		protect = 1 << 5;
 	else
-		SCpnt->cmnd[1] = 0;
+		protect = 0;
 
-	if (block > 0xffffffff) {
+	if (host_dif == SD_DIF_TYPE2_PROTECTION) {
+		SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
+
+		if (unlikely(SCpnt->cmnd == NULL)) {
+			ret = BLKPREP_DEFER;
+			goto out;
+		}
+
+		SCpnt->cmd_len = SD_EXT_CDB_SIZE;
+		memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
+		SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
+		SCpnt->cmnd[7] = 0x18;
+		SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
+		SCpnt->cmnd[10] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
+
+		/* LBA */
+		SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
+		SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
+		SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
+		SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
+		SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
+		SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
+		SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
+		SCpnt->cmnd[19] = (unsigned char) block & 0xff;
+
+		/* Expected Indirect LBA */
+		SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
+		SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
+		SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
+		SCpnt->cmnd[23] = (unsigned char) block & 0xff;
+
+		/* Transfer length */
+		SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
+		SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
+		SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
+		SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
+	} else if (block > 0xffffffff) {
 		SCpnt->cmnd[0] += READ_16 - READ_6;
-		SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
+		SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
 		SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
 		SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
 		SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
@@ -547,7 +612,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 			this_count = 0xffff;
 
 		SCpnt->cmnd[0] += READ_10 - READ_6;
-		SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
+		SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
 		SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
 		SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
 		SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
@@ -578,8 +643,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 
 	/* If DIF or DIX is enabled, tell HBA how to handle request */
 	if (host_dif || scsi_prot_sg_count(SCpnt))
-		sd_dif_op(SCpnt, host_dif, scsi_prot_sg_count(SCpnt),
-			  sdkp->protection_type);
+		sd_prot_op(SCpnt, host_dif);
 
 	/*
 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
@@ -1023,6 +1087,7 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	int result = SCpnt->result;
 	unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
 	struct scsi_sense_hdr sshdr;
+	struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
 	int sense_valid = 0;
 	int sense_deferred = 0;
 
@@ -1084,6 +1149,10 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
 		sd_dif_complete(SCpnt, good_bytes);
 
+	if (scsi_host_dif_capable(sdkp->device->host, sdkp->protection_type)
+	    == SD_DIF_TYPE2_PROTECTION && SCpnt->cmnd != SCpnt->request->cmd)
+		mempool_free(SCpnt->cmnd, sd_cdb_pool);
+
 	return good_bytes;
 }
 
@@ -1238,34 +1307,28 @@ void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
 	u8 type;
 
 	if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
-		type = 0;
-	else
-		type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
+		return;
 
-	sdkp->protection_type = type;
+	type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
 
-	switch (type) {
-	case SD_DIF_TYPE0_PROTECTION:
-	case SD_DIF_TYPE1_PROTECTION:
-	case SD_DIF_TYPE3_PROTECTION:
-		break;
+	if (type == sdkp->protection_type || !sdkp->first_scan)
+		return;
 
-	case SD_DIF_TYPE2_PROTECTION:
-		sd_printk(KERN_ERR, sdkp, "formatted with DIF Type 2 "	\
-			  "protection which is currently unsupported. "	\
-			  "Disabling disk!\n");
-		goto disable;
+	sdkp->protection_type = type;
 
-	default:
-		sd_printk(KERN_ERR, sdkp, "formatted with unknown "	\
-			  "protection type %d. Disabling disk!\n", type);
-		goto disable;
+	if (type > SD_DIF_TYPE3_PROTECTION) {
+		sd_printk(KERN_ERR, sdkp, "formatted with unsupported "	\
+			  "protection type %u. Disabling disk!\n", type);
+		sdkp->capacity = 0;
+		return;
 	}
 
-	return;
-
-disable:
-	sdkp->capacity = 0;
+	if (scsi_host_dif_capable(sdp->host, type))
+		sd_printk(KERN_NOTICE, sdkp,
+			  "Enabling DIF Type %u protection\n", type);
+	else
+		sd_printk(KERN_NOTICE, sdkp,
+			  "Disabling DIF Type %u protection\n", type);
 }
 
 static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
@@ -2300,8 +2363,24 @@ static int __init init_sd(void)
 	if (err)
 		goto err_out_class;
 
+	sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
+					 0, 0, NULL);
+	if (!sd_cdb_cache) {
+		printk(KERN_ERR "sd: can't init extended cdb cache\n");
+		goto err_out_class;
+	}
+
+	sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
+	if (!sd_cdb_pool) {
+		printk(KERN_ERR "sd: can't init extended cdb pool\n");
+		goto err_out_cache;
+	}
+
 	return 0;
 
+err_out_cache:
+	kmem_cache_destroy(sd_cdb_cache);
+
 err_out_class:
 	class_unregister(&sd_disk_class);
 err_out:
@@ -2321,6 +2400,9 @@ static void __exit exit_sd(void)
 
 	SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
 
+	mempool_destroy(sd_cdb_pool);
+	kmem_cache_destroy(sd_cdb_cache);
+
 	scsi_unregister_driver(&sd_template.gendrv);
 	class_unregister(&sd_disk_class);
 
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 8474b5bad3fe..e374804d26fb 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -37,6 +37,11 @@
  */
 #define SD_LAST_BUGGY_SECTORS	8
 
+enum {
+	SD_EXT_CDB_SIZE = 32,	/* Extended CDB size */
+	SD_MEMPOOL_SIZE = 2,	/* CDB pool size */
+};
+
 struct scsi_disk {
 	struct scsi_driver *driver;	/* always &sd_template */
 	struct scsi_device *device;
@@ -101,16 +106,12 @@ struct sd_dif_tuple {
 
 #ifdef CONFIG_BLK_DEV_INTEGRITY
 
-extern void sd_dif_op(struct scsi_cmnd *, unsigned int, unsigned int, unsigned int);
 extern void sd_dif_config_host(struct scsi_disk *);
 extern int sd_dif_prepare(struct request *rq, sector_t, unsigned int);
 extern void sd_dif_complete(struct scsi_cmnd *, unsigned int);
 
 #else /* CONFIG_BLK_DEV_INTEGRITY */
 
-static inline void sd_dif_op(struct scsi_cmnd *cmd, unsigned int a, unsigned int b, unsigned int c)
-{
-}
 static inline void sd_dif_config_host(struct scsi_disk *disk)
 {
 }
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
index 82f14a9482d0..88da97745710 100644
--- a/drivers/scsi/sd_dif.c
+++ b/drivers/scsi/sd_dif.c
@@ -320,15 +320,6 @@ void sd_dif_config_host(struct scsi_disk *sdkp)
 		dif = 0; dix = 1;
 	}
 
-	if (type) {
-		if (dif)
-			sd_printk(KERN_NOTICE, sdkp,
-				  "Enabling DIF Type %d protection\n", type);
-		else
-			sd_printk(KERN_NOTICE, sdkp,
-				  "Disabling DIF Type %d protection\n", type);
-	}
-
 	if (!dix)
 		return;
 
@@ -360,62 +351,6 @@ void sd_dif_config_host(struct scsi_disk *sdkp)
 }
 
 /*
- * DIF DMA operation magic decoder ring.
- */
-void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix, unsigned int type)
-{
-	int csum_convert, prot_op;
-
-	prot_op = 0;
-
-	/* Convert checksum? */
-	if (scsi_host_get_guard(scmd->device->host) != SHOST_DIX_GUARD_CRC)
-		csum_convert = 1;
-	else
-		csum_convert = 0;
-
-	BUG_ON(dif && (scmd->cmnd[0] == READ_6 || scmd->cmnd[0] == WRITE_6));
-
-	switch (scmd->cmnd[0]) {
-	case READ_6:
-	case READ_10:
-	case READ_12:
-	case READ_16:
-		if (dif && dix)
-			if (csum_convert)
-				prot_op = SCSI_PROT_READ_CONVERT;
-			else
-				prot_op = SCSI_PROT_READ_PASS;
-		else if (dif && !dix)
-			prot_op = SCSI_PROT_READ_STRIP;
-		else if (!dif && dix)
-			prot_op = SCSI_PROT_READ_INSERT;
-
-		break;
-
-	case WRITE_6:
-	case WRITE_10:
-	case WRITE_12:
-	case WRITE_16:
-		if (dif && dix)
-			if (csum_convert)
-				prot_op = SCSI_PROT_WRITE_CONVERT;
-			else
-				prot_op = SCSI_PROT_WRITE_PASS;
-		else if (dif && !dix)
-			prot_op = SCSI_PROT_WRITE_INSERT;
-		else if (!dif && dix)
-			prot_op = SCSI_PROT_WRITE_STRIP;
-
-		break;
-	}
-
-	scsi_set_prot_op(scmd, prot_op);
-	if (dif)
-		scsi_set_prot_type(scmd, type);
-}
-
-/*
  * The virtual start sector is the one that was originally submitted
  * by the block layer.	Due to partitioning, MD/DM cloning, etc. the
  * actual physical start sector is likely to be different.  Remap
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 0cb049f5cc56..040f751809ea 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1317,7 +1317,7 @@ static void sg_rq_end_io(struct request *rq, int uptodate)
 	}
 }
 
-static struct file_operations sg_fops = {
+static const struct file_operations sg_fops = {
 	.owner = THIS_MODULE,
 	.read = sg_read,
 	.write = sg_write,
@@ -1708,11 +1708,6 @@ static int sg_finish_rem_req(Sg_request * srp)
 	Sg_scatter_hold *req_schp = &srp->data;
 
 	SCSI_LOG_TIMEOUT(4, printk("sg_finish_rem_req: res_used=%d\n", (int) srp->res_used));
-	if (srp->res_used)
-		sg_unlink_reserve(sfp, srp);
-	else
-		sg_remove_scat(req_schp);
-
 	if (srp->rq) {
 		if (srp->bio)
 			ret = blk_rq_unmap_user(srp->bio);
@@ -1720,6 +1715,11 @@ static int sg_finish_rem_req(Sg_request * srp)
 		blk_put_request(srp->rq);
 	}
 
+	if (srp->res_used)
+		sg_unlink_reserve(sfp, srp);
+	else
+		sg_remove_scat(req_schp);
+
 	sg_remove_request(sfp, srp);
 
 	return ret;
@@ -2194,9 +2194,11 @@ static int sg_proc_seq_show_int(struct seq_file *s, void *v);
 static int sg_proc_single_open_adio(struct inode *inode, struct file *file);
 static ssize_t sg_proc_write_adio(struct file *filp, const char __user *buffer,
 			          size_t count, loff_t *off);
-static struct file_operations adio_fops = {
-	/* .owner, .read and .llseek added in sg_proc_init() */
+static const struct file_operations adio_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_single_open_adio,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.write = sg_proc_write_adio,
 	.release = single_release,
 };
@@ -2204,23 +2206,32 @@ static struct file_operations adio_fops = {
 static int sg_proc_single_open_dressz(struct inode *inode, struct file *file);
 static ssize_t sg_proc_write_dressz(struct file *filp, 
 		const char __user *buffer, size_t count, loff_t *off);
-static struct file_operations dressz_fops = {
+static const struct file_operations dressz_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_single_open_dressz,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.write = sg_proc_write_dressz,
 	.release = single_release,
 };
 
 static int sg_proc_seq_show_version(struct seq_file *s, void *v);
 static int sg_proc_single_open_version(struct inode *inode, struct file *file);
-static struct file_operations version_fops = {
+static const struct file_operations version_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_single_open_version,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = single_release,
 };
 
 static int sg_proc_seq_show_devhdr(struct seq_file *s, void *v);
 static int sg_proc_single_open_devhdr(struct inode *inode, struct file *file);
-static struct file_operations devhdr_fops = {
+static const struct file_operations devhdr_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_single_open_devhdr,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = single_release,
 };
 
@@ -2229,8 +2240,11 @@ static int sg_proc_open_dev(struct inode *inode, struct file *file);
 static void * dev_seq_start(struct seq_file *s, loff_t *pos);
 static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos);
 static void dev_seq_stop(struct seq_file *s, void *v);
-static struct file_operations dev_fops = {
+static const struct file_operations dev_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_open_dev,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = seq_release,
 };
 static const struct seq_operations dev_seq_ops = {
@@ -2242,8 +2256,11 @@ static const struct seq_operations dev_seq_ops = {
 
 static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v);
 static int sg_proc_open_devstrs(struct inode *inode, struct file *file);
-static struct file_operations devstrs_fops = {
+static const struct file_operations devstrs_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_open_devstrs,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = seq_release,
 };
 static const struct seq_operations devstrs_seq_ops = {
@@ -2255,8 +2272,11 @@ static const struct seq_operations devstrs_seq_ops = {
 
 static int sg_proc_seq_show_debug(struct seq_file *s, void *v);
 static int sg_proc_open_debug(struct inode *inode, struct file *file);
-static struct file_operations debug_fops = {
+static const struct file_operations debug_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_open_debug,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = seq_release,
 };
 static const struct seq_operations debug_seq_ops = {
@@ -2269,7 +2289,7 @@ static const struct seq_operations debug_seq_ops = {
 
 struct sg_proc_leaf {
 	const char * name;
-	struct file_operations * fops;
+	const struct file_operations * fops;
 };
 
 static struct sg_proc_leaf sg_proc_leaf_arr[] = {
@@ -2295,9 +2315,6 @@ sg_proc_init(void)
 	for (k = 0; k < num_leaves; ++k) {
 		leaf = &sg_proc_leaf_arr[k];
 		mask = leaf->fops->write ? S_IRUGO | S_IWUSR : S_IRUGO;
-		leaf->fops->owner = THIS_MODULE;
-		leaf->fops->read = seq_read;
-		leaf->fops->llseek = seq_lseek;
 		proc_create(leaf->name, mask, sg_proc_sgp, leaf->fops);
 	}
 	return 0;
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index eb61f7a70e1d..d6f340f48a3b 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -684,14 +684,20 @@ static void get_sectorsize(struct scsi_cd *cd)
 		cd->capacity = 0x1fffff;
 		sector_size = 2048;	/* A guess, just in case */
 	} else {
-#if 0
-		if (cdrom_get_last_written(&cd->cdi,
-					   &cd->capacity))
-#endif
-			cd->capacity = 1 + ((buffer[0] << 24) |
-						    (buffer[1] << 16) |
-						    (buffer[2] << 8) |
-						    buffer[3]);
+		long last_written;
+
+		cd->capacity = 1 + ((buffer[0] << 24) | (buffer[1] << 16) |
+				    (buffer[2] << 8) | buffer[3]);
+		/*
+		 * READ_CAPACITY doesn't return the correct size on
+		 * certain UDF media.  If last_written is larger, use
+		 * it instead.
+		 *
+		 * http://bugzilla.kernel.org/show_bug.cgi?id=9668
+		 */
+		if (!cdrom_get_last_written(&cd->cdi, &last_written))
+			cd->capacity = max_t(long, cd->capacity, last_written);
+
 		sector_size = (buffer[4] << 24) |
 		    (buffer[5] << 16) | (buffer[6] << 8) | buffer[7];
 		switch (sector_size) {
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index b33d04250bbc..12d58a7ed6bc 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -2859,11 +2859,8 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
 			ioctl_result = st_int_ioctl(STp, MTBSF, 1);
 
 		if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
-			int old_block_size = STp->block_size;
 			STp->block_size = arg & MT_ST_BLKSIZE_MASK;
 			if (STp->block_size != 0) {
-				if (old_block_size == 0)
-					normalize_buffer(STp->buffer);
 				(STp->buffer)->buffer_blocks =
 				    (STp->buffer)->buffer_size / STp->block_size;
 			}
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 2209620d2349..b1ae774016f1 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -64,6 +64,8 @@ static int serial_index(struct uart_port *port)
 	return (serial8250_reg.minor - 64) + port->line;
 }
 
+static unsigned int skip_txen_test; /* force skip of txen test at init time */
+
 /*
  * Debugging.
  */
@@ -2108,7 +2110,7 @@ static int serial8250_startup(struct uart_port *port)
 	   is variable. So, let's just don't test if we receive
 	   TX irq. This way, we'll never enable UART_BUG_TXEN.
 	 */
-	if (up->port.flags & UPF_NO_TXEN_TEST)
+	if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST)
 		goto dont_test_tx_en;
 
 	/*
@@ -3248,6 +3250,9 @@ MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
 module_param(nr_uarts, uint, 0644);
 MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
 
+module_param(skip_txen_test, uint, 0644);
+MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
+
 #ifdef CONFIG_SERIAL_8250_RSA
 module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
 MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index e7108e75653d..42e8550cd2b6 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1561,11 +1561,16 @@ enum pci_board_num_t {
 	pbn_exar_XR17C152,
 	pbn_exar_XR17C154,
 	pbn_exar_XR17C158,
+	pbn_exar_ibm_saturn,
 	pbn_pasemi_1682M,
 	pbn_ni8430_2,
 	pbn_ni8430_4,
 	pbn_ni8430_8,
 	pbn_ni8430_16,
+	pbn_ADDIDATA_PCIe_1_3906250,
+	pbn_ADDIDATA_PCIe_2_3906250,
+	pbn_ADDIDATA_PCIe_4_3906250,
+	pbn_ADDIDATA_PCIe_8_3906250,
 };
 
 /*
@@ -2146,6 +2151,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.base_baud	= 921600,
 		.uart_offset	= 0x200,
 	},
+	[pbn_exar_ibm_saturn] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 0x200,
+	},
+
 	/*
 	 * PA Semi PWRficient PA6T-1682M on-chip UART
 	 */
@@ -2185,6 +2197,37 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.uart_offset	= 0x10,
 		.first_offset	= 0x800,
 	},
+	/*
+	 * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
+	 */
+	[pbn_ADDIDATA_PCIe_1_3906250] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 3906250,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_ADDIDATA_PCIe_2_3906250] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 3906250,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_ADDIDATA_PCIe_4_3906250] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 3906250,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_ADDIDATA_PCIe_8_3906250] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 3906250,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
 };
 
 static const struct pci_device_id softmodem_blacklist[] = {
@@ -2649,6 +2692,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_SUBVENDOR_ID_CONNECT_TECH,
 		PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
 		pbn_b0_8_1843200_200 },
+	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+		PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT,
+		0, 0, pbn_exar_ibm_saturn },
 
 	{	PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -3556,6 +3602,38 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0,
 		pbn_b0_8_115200 },
 
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCIe7500,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_ADDIDATA_PCIe_4_3906250 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCIe7420,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_ADDIDATA_PCIe_2_3906250 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCIe7300,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_ADDIDATA_PCIe_1_3906250 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCIe7800,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_ADDIDATA_PCIe_8_3906250 },
+
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 03422ce878cf..e52257257279 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -862,7 +862,7 @@ config SERIAL_IMX_CONSOLE
 
 config SERIAL_UARTLITE
 	tristate "Xilinx uartlite serial port support"
-	depends on PPC32 || MICROBLAZE
+	depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE
 	select SERIAL_CORE
 	help
 	  Say Y here if you want to use the Xilinx uartlite serial controller.
@@ -1458,4 +1458,23 @@ config SERIAL_TIMBERDALE
 	---help---
 	Add support for UART controller on timberdale.
 
+config SERIAL_BCM63XX
+	tristate "bcm63xx serial port support"
+	select SERIAL_CORE
+	depends on BCM63XX
+	help
+	  If you have a bcm63xx CPU, you can enable its onboard
+	  serial port by enabling this options.
+
+          To compile this driver as a module, choose M here: the
+          module will be called bcm963xx_uart.
+
+config SERIAL_BCM63XX_CONSOLE
+	bool "Console on bcm63xx serial port"
+	depends on SERIAL_BCM63XX=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  If you have enabled the serial port on the bcm63xx CPU
+	  you can make it the console by answering Y to this option.
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 97f6fcc8b432..d21d5dd5d048 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
 obj-$(CONFIG_SERIAL_PXA) += pxa.o
 obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
+obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 3551c5cb7094..9d948bccafaf 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1531,7 +1531,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
 	void *data;
 	int ret;
 
-	BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
+	BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
 
 	port = &atmel_ports[pdev->id];
 	port->backup_imr = 0;
diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
new file mode 100644
index 000000000000..beddaa6e9069
--- /dev/null
+++ b/drivers/serial/bcm63xx_uart.c
@@ -0,0 +1,890 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from many drivers using generic_serial interface.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ *
+ *  Serial driver for BCM63xx integrated UART.
+ *
+ * Hardware flow control was _not_ tested since I only have RX/TX on
+ * my board.
+ */
+
+#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <bcm63xx_clk.h>
+#include <bcm63xx_irq.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+#define BCM63XX_NR_UARTS	1
+
+static struct uart_port ports[BCM63XX_NR_UARTS];
+
+/*
+ * rx interrupt mask / stat
+ *
+ * mask:
+ *  - rx fifo full
+ *  - rx fifo above threshold
+ *  - rx fifo not empty for too long
+ */
+#define UART_RX_INT_MASK	(UART_IR_MASK(UART_IR_RXOVER) |		\
+				UART_IR_MASK(UART_IR_RXTHRESH) |	\
+				UART_IR_MASK(UART_IR_RXTIMEOUT))
+
+#define UART_RX_INT_STAT	(UART_IR_STAT(UART_IR_RXOVER) |		\
+				UART_IR_STAT(UART_IR_RXTHRESH) |	\
+				UART_IR_STAT(UART_IR_RXTIMEOUT))
+
+/*
+ * tx interrupt mask / stat
+ *
+ * mask:
+ * - tx fifo empty
+ * - tx fifo below threshold
+ */
+#define UART_TX_INT_MASK	(UART_IR_MASK(UART_IR_TXEMPTY) |	\
+				UART_IR_MASK(UART_IR_TXTRESH))
+
+#define UART_TX_INT_STAT	(UART_IR_STAT(UART_IR_TXEMPTY) |	\
+				UART_IR_STAT(UART_IR_TXTRESH))
+
+/*
+ * external input interrupt
+ *
+ * mask: any edge on CTS, DCD
+ */
+#define UART_EXTINP_INT_MASK	(UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
+				 UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
+
+/*
+ * handy uart register accessor
+ */
+static inline unsigned int bcm_uart_readl(struct uart_port *port,
+					 unsigned int offset)
+{
+	return bcm_readl(port->membase + offset);
+}
+
+static inline void bcm_uart_writel(struct uart_port *port,
+				  unsigned int value, unsigned int offset)
+{
+	bcm_writel(value, port->membase + offset);
+}
+
+/*
+ * serial core request to check if uart tx fifo is empty
+ */
+static unsigned int bcm_uart_tx_empty(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
+}
+
+/*
+ * serial core request to set RTS and DTR pin state and loopback mode
+ */
+static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_MCTL_REG);
+	val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
+	/* invert of written value is reflected on the pin */
+	if (!(mctrl & TIOCM_DTR))
+		val |= UART_MCTL_DTR_MASK;
+	if (!(mctrl & TIOCM_RTS))
+		val |= UART_MCTL_RTS_MASK;
+	bcm_uart_writel(port, val, UART_MCTL_REG);
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	if (mctrl & TIOCM_LOOP)
+		val |= UART_CTL_LOOPBACK_MASK;
+	else
+		val &= ~UART_CTL_LOOPBACK_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to return RI, CTS, DCD and DSR pin state
+ */
+static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
+{
+	unsigned int val, mctrl;
+
+	mctrl = 0;
+	val = bcm_uart_readl(port, UART_EXTINP_REG);
+	if (val & UART_EXTINP_RI_MASK)
+		mctrl |= TIOCM_RI;
+	if (val & UART_EXTINP_CTS_MASK)
+		mctrl |= TIOCM_CTS;
+	if (val & UART_EXTINP_DCD_MASK)
+		mctrl |= TIOCM_CD;
+	if (val & UART_EXTINP_DSR_MASK)
+		mctrl |= TIOCM_DSR;
+	return mctrl;
+}
+
+/*
+ * serial core request to disable tx ASAP (used for flow control)
+ */
+static void bcm_uart_stop_tx(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val &= ~(UART_CTL_TXEN_MASK);
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val &= ~UART_TX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to (re)enable tx
+ */
+static void bcm_uart_start_tx(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val |= UART_TX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val |= UART_CTL_TXEN_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to stop rx, called before port shutdown
+ */
+static void bcm_uart_stop_rx(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val &= ~UART_RX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to enable modem status interrupt reporting
+ */
+static void bcm_uart_enable_ms(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val |= UART_IR_MASK(UART_IR_EXTIP);
+	bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to start/stop emitting break char
+ */
+static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	if (ctl)
+		val |= UART_CTL_XMITBRK_MASK;
+	else
+		val &= ~UART_CTL_XMITBRK_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * return port type in string format
+ */
+static const char *bcm_uart_type(struct uart_port *port)
+{
+	return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
+}
+
+/*
+ * read all chars in rx fifo and send them to core
+ */
+static void bcm_uart_do_rx(struct uart_port *port)
+{
+	struct tty_struct *tty;
+	unsigned int max_count;
+
+	/* limit number of char read in interrupt, should not be
+	 * higher than fifo size anyway since we're much faster than
+	 * serial port */
+	max_count = 32;
+	tty = port->info->port.tty;
+	do {
+		unsigned int iestat, c, cstat;
+		char flag;
+
+		/* get overrun/fifo empty information from ier
+		 * register */
+		iestat = bcm_uart_readl(port, UART_IR_REG);
+		if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
+			break;
+
+		cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
+		port->icount.rx++;
+		flag = TTY_NORMAL;
+		c &= 0xff;
+
+		if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
+			/* do stats first */
+			if (cstat & UART_FIFO_BRKDET_MASK) {
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			}
+
+			if (cstat & UART_FIFO_PARERR_MASK)
+				port->icount.parity++;
+			if (cstat & UART_FIFO_FRAMEERR_MASK)
+				port->icount.frame++;
+
+			/* update flag wrt read_status_mask */
+			cstat &= port->read_status_mask;
+			if (cstat & UART_FIFO_BRKDET_MASK)
+				flag = TTY_BREAK;
+			if (cstat & UART_FIFO_FRAMEERR_MASK)
+				flag = TTY_FRAME;
+			if (cstat & UART_FIFO_PARERR_MASK)
+				flag = TTY_PARITY;
+		}
+
+		if (uart_handle_sysrq_char(port, c))
+			continue;
+
+		if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
+			port->icount.overrun++;
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		}
+
+		if ((cstat & port->ignore_status_mask) == 0)
+			tty_insert_flip_char(tty, c, flag);
+
+	} while (--max_count);
+
+	tty_flip_buffer_push(tty);
+}
+
+/*
+ * fill tx fifo with chars to send, stop when fifo is about to be full
+ * or when all chars have been sent.
+ */
+static void bcm_uart_do_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit;
+	unsigned int val, max_count;
+
+	if (port->x_char) {
+		bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_tx_stopped(port)) {
+		bcm_uart_stop_tx(port);
+		return;
+	}
+
+	xmit = &port->info->xmit;
+	if (uart_circ_empty(xmit))
+		goto txq_empty;
+
+	val = bcm_uart_readl(port, UART_MCTL_REG);
+	val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
+	max_count = port->fifosize - val;
+
+	while (max_count--) {
+		unsigned int c;
+
+		c = xmit->buf[xmit->tail];
+		bcm_uart_writel(port, c, UART_FIFO_REG);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		goto txq_empty;
+	return;
+
+txq_empty:
+	/* nothing to send, disable transmit interrupt */
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val &= ~UART_TX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+	return;
+}
+
+/*
+ * process uart interrupt
+ */
+static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
+{
+	struct uart_port *port;
+	unsigned int irqstat;
+
+	port = dev_id;
+	spin_lock(&port->lock);
+
+	irqstat = bcm_uart_readl(port, UART_IR_REG);
+	if (irqstat & UART_RX_INT_STAT)
+		bcm_uart_do_rx(port);
+
+	if (irqstat & UART_TX_INT_STAT)
+		bcm_uart_do_tx(port);
+
+	if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
+		unsigned int estat;
+
+		estat = bcm_uart_readl(port, UART_EXTINP_REG);
+		if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
+			uart_handle_cts_change(port,
+					       estat & UART_EXTINP_CTS_MASK);
+		if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
+			uart_handle_dcd_change(port,
+					       estat & UART_EXTINP_DCD_MASK);
+	}
+
+	spin_unlock(&port->lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * enable rx & tx operation on uart
+ */
+static void bcm_uart_enable(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * disable rx & tx operation on uart
+ */
+static void bcm_uart_disable(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
+		 UART_CTL_RXEN_MASK);
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * clear all unread data in rx fifo and unsent data in tx fifo
+ */
+static void bcm_uart_flush(struct uart_port *port)
+{
+	unsigned int val;
+
+	/* empty rx and tx fifo */
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	/* read any pending char to make sure all irq status are
+	 * cleared */
+	(void)bcm_uart_readl(port, UART_FIFO_REG);
+}
+
+/*
+ * serial core request to initialize uart and start rx operation
+ */
+static int bcm_uart_startup(struct uart_port *port)
+{
+	unsigned int val;
+	int ret;
+
+	/* mask all irq and flush port */
+	bcm_uart_disable(port);
+	bcm_uart_writel(port, 0, UART_IR_REG);
+	bcm_uart_flush(port);
+
+	/* clear any pending external input interrupt */
+	(void)bcm_uart_readl(port, UART_EXTINP_REG);
+
+	/* set rx/tx fifo thresh to fifo half size */
+	val = bcm_uart_readl(port, UART_MCTL_REG);
+	val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
+	val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
+	val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
+	bcm_uart_writel(port, val, UART_MCTL_REG);
+
+	/* set rx fifo timeout to 1 char time */
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val &= ~UART_CTL_RXTMOUTCNT_MASK;
+	val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	/* report any edge on dcd and cts */
+	val = UART_EXTINP_INT_MASK;
+	val |= UART_EXTINP_DCD_NOSENSE_MASK;
+	val |= UART_EXTINP_CTS_NOSENSE_MASK;
+	bcm_uart_writel(port, val, UART_EXTINP_REG);
+
+	/* register irq and enable rx interrupts */
+	ret = request_irq(port->irq, bcm_uart_interrupt, 0,
+			  bcm_uart_type(port), port);
+	if (ret)
+		return ret;
+	bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
+	bcm_uart_enable(port);
+	return 0;
+}
+
+/*
+ * serial core request to flush & disable uart
+ */
+static void bcm_uart_shutdown(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	bcm_uart_writel(port, 0, UART_IR_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	bcm_uart_disable(port);
+	bcm_uart_flush(port);
+	free_irq(port->irq, port);
+}
+
+/*
+ * serial core request to change current uart setting
+ */
+static void bcm_uart_set_termios(struct uart_port *port,
+				 struct ktermios *new,
+				 struct ktermios *old)
+{
+	unsigned int ctl, baud, quot, ier;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* disable uart while changing speed */
+	bcm_uart_disable(port);
+	bcm_uart_flush(port);
+
+	/* update Control register */
+	ctl = bcm_uart_readl(port, UART_CTL_REG);
+	ctl &= ~UART_CTL_BITSPERSYM_MASK;
+
+	switch (new->c_cflag & CSIZE) {
+	case CS5:
+		ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	case CS6:
+		ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	case CS7:
+		ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	default:
+		ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	}
+
+	ctl &= ~UART_CTL_STOPBITS_MASK;
+	if (new->c_cflag & CSTOPB)
+		ctl |= UART_CTL_STOPBITS_2;
+	else
+		ctl |= UART_CTL_STOPBITS_1;
+
+	ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+	if (new->c_cflag & PARENB)
+		ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+	ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+	if (new->c_cflag & PARODD)
+		ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+	bcm_uart_writel(port, ctl, UART_CTL_REG);
+
+	/* update Baudword register */
+	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+	quot = uart_get_divisor(port, baud) - 1;
+	bcm_uart_writel(port, quot, UART_BAUD_REG);
+
+	/* update Interrupt register */
+	ier = bcm_uart_readl(port, UART_IR_REG);
+
+	ier &= ~UART_IR_MASK(UART_IR_EXTIP);
+	if (UART_ENABLE_MS(port, new->c_cflag))
+		ier |= UART_IR_MASK(UART_IR_EXTIP);
+
+	bcm_uart_writel(port, ier, UART_IR_REG);
+
+	/* update read/ignore mask */
+	port->read_status_mask = UART_FIFO_VALID_MASK;
+	if (new->c_iflag & INPCK) {
+		port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
+		port->read_status_mask |= UART_FIFO_PARERR_MASK;
+	}
+	if (new->c_iflag & (BRKINT))
+		port->read_status_mask |= UART_FIFO_BRKDET_MASK;
+
+	port->ignore_status_mask = 0;
+	if (new->c_iflag & IGNPAR)
+		port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
+	if (new->c_iflag & IGNBRK)
+		port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
+	if (!(new->c_cflag & CREAD))
+		port->ignore_status_mask |= UART_FIFO_VALID_MASK;
+
+	uart_update_timeout(port, new->c_cflag, baud);
+	bcm_uart_enable(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * serial core request to claim uart iomem
+ */
+static int bcm_uart_request_port(struct uart_port *port)
+{
+	unsigned int size;
+
+	size = RSET_UART_SIZE;
+	if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
+		dev_err(port->dev, "Memory region busy\n");
+		return -EBUSY;
+	}
+
+	port->membase = ioremap(port->mapbase, size);
+	if (!port->membase) {
+		dev_err(port->dev, "Unable to map registers\n");
+		release_mem_region(port->mapbase, size);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+/*
+ * serial core request to release uart iomem
+ */
+static void bcm_uart_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, RSET_UART_SIZE);
+	iounmap(port->membase);
+}
+
+/*
+ * serial core request to do any port required autoconfiguration
+ */
+static void bcm_uart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		if (bcm_uart_request_port(port))
+			return;
+		port->type = PORT_BCM63XX;
+	}
+}
+
+/*
+ * serial core request to check that port information in serinfo are
+ * suitable
+ */
+static int bcm_uart_verify_port(struct uart_port *port,
+				struct serial_struct *serinfo)
+{
+	if (port->type != PORT_BCM63XX)
+		return -EINVAL;
+	if (port->irq != serinfo->irq)
+		return -EINVAL;
+	if (port->iotype != serinfo->io_type)
+		return -EINVAL;
+	if (port->mapbase != (unsigned long)serinfo->iomem_base)
+		return -EINVAL;
+	return 0;
+}
+
+/* serial core callbacks */
+static struct uart_ops bcm_uart_ops = {
+	.tx_empty	= bcm_uart_tx_empty,
+	.get_mctrl	= bcm_uart_get_mctrl,
+	.set_mctrl	= bcm_uart_set_mctrl,
+	.start_tx	= bcm_uart_start_tx,
+	.stop_tx	= bcm_uart_stop_tx,
+	.stop_rx	= bcm_uart_stop_rx,
+	.enable_ms	= bcm_uart_enable_ms,
+	.break_ctl	= bcm_uart_break_ctl,
+	.startup	= bcm_uart_startup,
+	.shutdown	= bcm_uart_shutdown,
+	.set_termios	= bcm_uart_set_termios,
+	.type		= bcm_uart_type,
+	.release_port	= bcm_uart_release_port,
+	.request_port	= bcm_uart_request_port,
+	.config_port	= bcm_uart_config_port,
+	.verify_port	= bcm_uart_verify_port,
+};
+
+
+
+#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+	unsigned int tmout;
+
+	/* Wait up to 10ms for the character(s) to be sent. */
+	tmout = 10000;
+	while (--tmout) {
+		unsigned int val;
+
+		val = bcm_uart_readl(port, UART_IR_REG);
+		if (val & UART_IR_STAT(UART_IR_TXEMPTY))
+			break;
+		udelay(1);
+	}
+
+	/* Wait up to 1s for flow control if necessary */
+	if (port->flags & UPF_CONS_FLOW) {
+		tmout = 1000000;
+		while (--tmout) {
+			unsigned int val;
+
+			val = bcm_uart_readl(port, UART_EXTINP_REG);
+			if (val & UART_EXTINP_CTS_MASK)
+				break;
+			udelay(1);
+		}
+	}
+}
+
+/*
+ * output given char
+ */
+static void bcm_console_putchar(struct uart_port *port, int ch)
+{
+	wait_for_xmitr(port);
+	bcm_uart_writel(port, ch, UART_FIFO_REG);
+}
+
+/*
+ * console core request to output given string
+ */
+static void bcm_console_write(struct console *co, const char *s,
+			      unsigned int count)
+{
+	struct uart_port *port;
+	unsigned long flags;
+	int locked;
+
+	port = &ports[co->index];
+
+	local_irq_save(flags);
+	if (port->sysrq) {
+		/* bcm_uart_interrupt() already took the lock */
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&port->lock);
+	} else {
+		spin_lock(&port->lock);
+		locked = 1;
+	}
+
+	/* call helper to deal with \r\n */
+	uart_console_write(port, s, count, bcm_console_putchar);
+
+	/* and wait for char to be transmitted */
+	wait_for_xmitr(port);
+
+	if (locked)
+		spin_unlock(&port->lock);
+	local_irq_restore(flags);
+}
+
+/*
+ * console core request to setup given console, find matching uart
+ * port and setup it.
+ */
+static int bcm_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
+		return -EINVAL;
+	port = &ports[co->index];
+	if (!port->membase)
+		return -ENODEV;
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver bcm_uart_driver;
+
+static struct console bcm63xx_console = {
+	.name		= "ttyS",
+	.write		= bcm_console_write,
+	.device		= uart_console_device,
+	.setup		= bcm_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &bcm_uart_driver,
+};
+
+static int __init bcm63xx_console_init(void)
+{
+	register_console(&bcm63xx_console);
+	return 0;
+}
+
+console_initcall(bcm63xx_console_init);
+
+#define BCM63XX_CONSOLE	(&bcm63xx_console)
+#else
+#define BCM63XX_CONSOLE	NULL
+#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
+
+static struct uart_driver bcm_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "bcm63xx_uart",
+	.dev_name	= "ttyS",
+	.major		= TTY_MAJOR,
+	.minor		= 64,
+	.nr		= 1,
+	.cons		= BCM63XX_CONSOLE,
+};
+
+/*
+ * platform driver probe/remove callback
+ */
+static int __devinit bcm_uart_probe(struct platform_device *pdev)
+{
+	struct resource *res_mem, *res_irq;
+	struct uart_port *port;
+	struct clk *clk;
+	int ret;
+
+	if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
+		return -EINVAL;
+
+	if (ports[pdev->id].membase)
+		return -EBUSY;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res_mem)
+		return -ENODEV;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res_irq)
+		return -ENODEV;
+
+	clk = clk_get(&pdev->dev, "periph");
+	if (IS_ERR(clk))
+		return -ENODEV;
+
+	port = &ports[pdev->id];
+	memset(port, 0, sizeof(*port));
+	port->iotype = UPIO_MEM;
+	port->mapbase = res_mem->start;
+	port->irq = res_irq->start;
+	port->ops = &bcm_uart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+	port->dev = &pdev->dev;
+	port->fifosize = 16;
+	port->uartclk = clk_get_rate(clk) / 2;
+	clk_put(clk);
+
+	ret = uart_add_one_port(&bcm_uart_driver, port);
+	if (ret) {
+		kfree(port);
+		return ret;
+	}
+	platform_set_drvdata(pdev, port);
+	return 0;
+}
+
+static int __devexit bcm_uart_remove(struct platform_device *pdev)
+{
+	struct uart_port *port;
+
+	port = platform_get_drvdata(pdev);
+	uart_remove_one_port(&bcm_uart_driver, port);
+	platform_set_drvdata(pdev, NULL);
+	/* mark port as free */
+	ports[pdev->id].membase = 0;
+	return 0;
+}
+
+/*
+ * platform driver stuff
+ */
+static struct platform_driver bcm_uart_platform_driver = {
+	.probe	= bcm_uart_probe,
+	.remove	= __devexit_p(bcm_uart_remove),
+	.driver	= {
+		.owner = THIS_MODULE,
+		.name  = "bcm63xx_uart",
+	},
+};
+
+static int __init bcm_uart_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&bcm_uart_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&bcm_uart_platform_driver);
+	if (ret)
+		uart_unregister_driver(&bcm_uart_driver);
+
+	return ret;
+}
+
+static void __exit bcm_uart_exit(void)
+{
+	platform_driver_unregister(&bcm_uart_platform_driver);
+	uart_unregister_driver(&bcm_uart_driver);
+}
+
+module_init(bcm_uart_init);
+module_exit(bcm_uart_exit);
+
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 2d7feecaf492..0028b6f89ce6 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -307,7 +307,7 @@ static void stop_processor(struct icom_port *icom_port)
 	if (port < 4) {
 		temp = readl(stop_proc[port].global_control_reg);
 		temp =
-	    		(temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
+			(temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
 		writel(temp, stop_proc[port].global_control_reg);
 
 		/* write flush */
@@ -336,7 +336,7 @@ static void start_processor(struct icom_port *icom_port)
 	if (port < 4) {
 		temp = readl(start_proc[port].global_control_reg);
 		temp =
-	    		(temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
+			(temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
 		writel(temp, start_proc[port].global_control_reg);
 
 		/* write flush */
@@ -509,8 +509,8 @@ static void load_code(struct icom_port *icom_port)
 		dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n");
 	}
 
-      if (new_page != NULL)
-	      pci_free_consistent(dev, 4096, new_page, temp_pci);
+	if (new_page != NULL)
+		pci_free_consistent(dev, 4096, new_page, temp_pci);
 }
 
 static int startup(struct icom_port *icom_port)
@@ -1493,15 +1493,15 @@ static int __devinit icom_probe(struct pci_dev *dev,
 				const struct pci_device_id *ent)
 {
 	int index;
-        unsigned int command_reg;
-        int retval;
-        struct icom_adapter *icom_adapter;
-        struct icom_port *icom_port;
+	unsigned int command_reg;
+	int retval;
+	struct icom_adapter *icom_adapter;
+	struct icom_port *icom_port;
 
-        retval = pci_enable_device(dev);
-        if (retval) {
+	retval = pci_enable_device(dev);
+	if (retval) {
 		dev_err(&dev->dev, "Device enable FAILED\n");
-                return retval;
+		return retval;
 	}
 
 	if ( (retval = pci_request_regions(dev, "icom"))) {
@@ -1510,23 +1510,23 @@ static int __devinit icom_probe(struct pci_dev *dev,
 		 return retval;
 	 }
 
-        pci_set_master(dev);
+	pci_set_master(dev);
 
-        if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
+	if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
 		dev_err(&dev->dev, "PCI Config read FAILED\n");
-                return retval;
-        }
+		return retval;
+	}
 
 	pci_write_config_dword(dev, PCI_COMMAND,
 		command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
  		| PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 
-        if (ent->driver_data == ADAPTER_V1) {
+	if (ent->driver_data == ADAPTER_V1) {
 		pci_write_config_dword(dev, 0x44, 0x8300830A);
-	 } else {
+	} else {
 		pci_write_config_dword(dev, 0x44, 0x42004200);
 		pci_write_config_dword(dev, 0x48, 0x42004200);
-         }
+	}
 
 
 	retval = icom_alloc_adapter(&icom_adapter);
@@ -1536,10 +1536,10 @@ static int __devinit icom_probe(struct pci_dev *dev,
 		 goto probe_exit0;
 	}
 
-	 icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
-	 icom_adapter->pci_dev = dev;
-	 icom_adapter->version = ent->driver_data;
-	 icom_adapter->subsystem_id = ent->subdevice;
+	icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
+	icom_adapter->pci_dev = dev;
+	icom_adapter->version = ent->driver_data;
+	icom_adapter->subsystem_id = ent->subdevice;
 
 
 	retval = icom_init_ports(icom_adapter);
@@ -1548,7 +1548,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
 		goto probe_exit1;
 	}
 
-	 icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
+	icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
 
 	if (!icom_adapter->base_addr)
 		goto probe_exit1;
@@ -1562,7 +1562,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
 
 	retval = icom_load_ports(icom_adapter);
 
-        for (index = 0; index < icom_adapter->numb_ports; index++) {
+	for (index = 0; index < icom_adapter->numb_ports; index++) {
 		icom_port = &icom_adapter->port_info[index];
 
 		if (icom_port->status == ICOM_PORT_ACTIVE) {
@@ -1579,7 +1579,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
 				icom_port->status = ICOM_PORT_OFF;
 				dev_err(&dev->dev, "Device add failed\n");
 			 } else
-			        dev_info(&dev->dev, "Device added\n");
+				dev_info(&dev->dev, "Device added\n");
 		}
 	}
 
@@ -1595,9 +1595,7 @@ probe_exit0:
 	pci_release_regions(dev);
 	pci_disable_device(dev);
 
-        return retval;
-
-
+	return retval;
 }
 
 static void __devexit icom_remove(struct pci_dev *dev)
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index d7bcd074d383..7ce9e9f567a3 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -705,7 +705,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
 		return -EINVAL;
 
 	if ((ser->irq != port->irq) ||
-	    (ser->io_type != SERIAL_IO_MEM) ||
+	    (ser->io_type != UPIO_MEM) ||
 	    (ser->baud_base != port->uartclk)  ||
 	    (ser->iomem_base != (void *)port->mapbase) ||
 	    (ser->hub6 != 0))
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 7f5e26873220..2199d819a987 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -638,7 +638,7 @@ static void __init sa1100_init_ports(void)
 	PPSR |= PPC_TXD1 | PPC_TXD3;
 }
 
-void __init sa1100_register_uart_fns(struct sa1100_port_fns *fns)
+void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns)
 {
 	if (fns->get_mctrl)
 		sa1100_pops.get_mctrl = fns->get_mctrl;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 1689bda1d13b..dcc72444e8e7 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1270,6 +1270,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 
 	BUG_ON(!kernel_locked());
 
+	if (!state)
+		return;
+
 	uport = state->uart_port;
 	port = &state->port;
 
@@ -1316,9 +1319,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	 */
 	if (port->flags & ASYNC_INITIALIZED) {
 		unsigned long flags;
-		spin_lock_irqsave(&port->lock, flags);
+		spin_lock_irqsave(&uport->lock, flags);
 		uport->ops->stop_rx(uport);
-		spin_unlock_irqrestore(&port->lock, flags);
+		spin_unlock_irqrestore(&uport->lock, flags);
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
 		 * has completely drained; this is especially
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index a3bb49031a7f..ff4617e21426 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -873,10 +873,10 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
-	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
-	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
+	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
+	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"),  /* Sierra Wireless AC850 3G Network Adapter R1 */
@@ -884,9 +884,9 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
 	PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
-	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "COMpad2.cis"),
-	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
-	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"),
 	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100  1.00.",0x19ca78af,0xf964f42b),
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 0f7cf4c453e6..c50e9fbbf743 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -221,21 +221,26 @@ sio_quot_set(struct uart_txx9_port *up, int quot)
 		sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6);
 }
 
+static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port)
+{
+	return container_of(port, struct uart_txx9_port, port);
+}
+
 static void serial_txx9_stop_tx(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
 }
 
 static void serial_txx9_start_tx(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
 }
 
 static void serial_txx9_stop_rx(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	up->port.read_status_mask &= ~TXX9_SIDISR_RDIS;
 }
 
@@ -246,7 +251,7 @@ static void serial_txx9_enable_ms(struct uart_port *port)
 
 static void serial_txx9_initialize(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned int tmout = 10000;
 
 	sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
@@ -414,7 +419,7 @@ static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id)
 
 static unsigned int serial_txx9_tx_empty(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned long flags;
 	unsigned int ret;
 
@@ -427,7 +432,7 @@ static unsigned int serial_txx9_tx_empty(struct uart_port *port)
 
 static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned int ret;
 
 	/* no modem control lines */
@@ -440,7 +445,7 @@ static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
 
 static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 
 	if (mctrl & TIOCM_RTS)
 		sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
@@ -450,7 +455,7 @@ static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&up->port.lock, flags);
@@ -494,7 +499,7 @@ static int serial_txx9_get_poll_char(struct uart_port *port)
 {
 	unsigned int ier;
 	unsigned char c;
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -520,7 +525,7 @@ static int serial_txx9_get_poll_char(struct uart_port *port)
 static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
 {
 	unsigned int ier;
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -551,7 +556,7 @@ static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
 
 static int serial_txx9_startup(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned long flags;
 	int retval;
 
@@ -596,7 +601,7 @@ static int serial_txx9_startup(struct uart_port *port)
 
 static void serial_txx9_shutdown(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned long flags;
 
 	/*
@@ -636,7 +641,7 @@ static void
 serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
 		       struct ktermios *old)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned int cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
@@ -814,19 +819,19 @@ static void serial_txx9_release_resource(struct uart_txx9_port *up)
 
 static void serial_txx9_release_port(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	serial_txx9_release_resource(up);
 }
 
 static int serial_txx9_request_port(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	return serial_txx9_request_resource(up);
 }
 
 static void serial_txx9_config_port(struct uart_port *port, int uflags)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	int ret;
 
 	/*
@@ -897,7 +902,7 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv,
 
 static void serial_txx9_console_putchar(struct uart_port *port, int ch)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 
 	wait_for_xmitr(up);
 	sio_out(up, TXX9_SITFIFO, ch);
diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c
index d3b496800477..b204a0929139 100644
--- a/drivers/sfi/sfi_core.c
+++ b/drivers/sfi/sfi_core.c
@@ -90,7 +90,11 @@ static struct sfi_table_simple *syst_va __read_mostly;
  */
 static u32 sfi_use_ioremap __read_mostly;
 
-static void __iomem *sfi_map_memory(u64 phys, u32 size)
+/*
+ * sfi_un/map_memory calls early_ioremap/iounmap which is a __init function
+ * and introduces section mismatch. So use __ref to make it calm.
+ */
+static void __iomem * __ref sfi_map_memory(u64 phys, u32 size)
 {
 	if (!phys || !size)
 		return NULL;
@@ -101,7 +105,7 @@ static void __iomem *sfi_map_memory(u64 phys, u32 size)
 		return early_ioremap(phys, size);
 }
 
-static void sfi_unmap_memory(void __iomem *virt, u32 size)
+static void __ref sfi_unmap_memory(void __iomem *virt, u32 size)
 {
 	if (!virt || !size)
 		return;
@@ -125,7 +129,7 @@ static void sfi_print_table_header(unsigned long long pa,
  * sfi_verify_table()
  * Sanity check table lengh, calculate checksum
  */
-static __init int sfi_verify_table(struct sfi_table_header *table)
+static int sfi_verify_table(struct sfi_table_header *table)
 {
 
 	u8 checksum = 0;
@@ -213,12 +217,17 @@ static int sfi_table_check_key(struct sfi_table_header *th,
  *    the mapped virt address will be returned, and the virt space
  *    will be released by call sfi_put_table() later
  *
+ * This two cases are from two different functions with two different
+ * sections and causes section mismatch warning. So use __ref to tell
+ * modpost not to make any noise.
+ *
  * Return value:
  *	NULL:			when can't find a table matching the key
  *	ERR_PTR(error):		error value
  *	virt table address:	when a matched table is found
  */
-struct sfi_table_header *sfi_check_table(u64 pa, struct sfi_table_key *key)
+struct sfi_table_header *
+ __ref sfi_check_table(u64 pa, struct sfi_table_key *key)
 {
 	struct sfi_table_header *th;
 	void *ret = NULL;
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 6d7a3f82c54b..21a118269cac 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
 obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
-obj-$(CONFIG_SPI_IMX)			+= mxc_spi.o
+obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
 obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 958a3ffc8987..ff5bbb9c43c9 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -1826,7 +1826,7 @@ static struct amba_id pl022_ids[] = {
 		 * ST Micro derivative, this has 32bit wide
 		 * and 32 locations deep TX/RX FIFO
 		 */
-		.id	= 0x00108022,
+		.id	= 0x01080022,
 		.mask	= 0xffffffff,
 		.data	= &vendor_st,
 	},
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/spi_imx.c
index b1447236ae81..89c22efedfb0 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/spi_imx.c
@@ -48,14 +48,14 @@
 #define MXC_INT_RR	(1 << 0) /* Receive data ready interrupt */
 #define MXC_INT_TE	(1 << 1) /* Transmit FIFO empty interrupt */
 
-struct mxc_spi_config {
+struct spi_imx_config {
 	unsigned int speed_hz;
 	unsigned int bpw;
 	unsigned int mode;
 	int cs;
 };
 
-struct mxc_spi_data {
+struct spi_imx_data {
 	struct spi_bitbang bitbang;
 
 	struct completion xfer_done;
@@ -66,43 +66,43 @@ struct mxc_spi_data {
 	int *chipselect;
 
 	unsigned int count;
-	void (*tx)(struct mxc_spi_data *);
-	void (*rx)(struct mxc_spi_data *);
+	void (*tx)(struct spi_imx_data *);
+	void (*rx)(struct spi_imx_data *);
 	void *rx_buf;
 	const void *tx_buf;
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
 
 	/* SoC specific functions */
-	void (*intctrl)(struct mxc_spi_data *, int);
-	int (*config)(struct mxc_spi_data *, struct mxc_spi_config *);
-	void (*trigger)(struct mxc_spi_data *);
-	int (*rx_available)(struct mxc_spi_data *);
+	void (*intctrl)(struct spi_imx_data *, int);
+	int (*config)(struct spi_imx_data *, struct spi_imx_config *);
+	void (*trigger)(struct spi_imx_data *);
+	int (*rx_available)(struct spi_imx_data *);
 };
 
 #define MXC_SPI_BUF_RX(type)						\
-static void mxc_spi_buf_rx_##type(struct mxc_spi_data *mxc_spi)		\
+static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx)		\
 {									\
-	unsigned int val = readl(mxc_spi->base + MXC_CSPIRXDATA);	\
+	unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);	\
 									\
-	if (mxc_spi->rx_buf) {						\
-		*(type *)mxc_spi->rx_buf = val;				\
-		mxc_spi->rx_buf += sizeof(type);			\
+	if (spi_imx->rx_buf) {						\
+		*(type *)spi_imx->rx_buf = val;				\
+		spi_imx->rx_buf += sizeof(type);			\
 	}								\
 }
 
 #define MXC_SPI_BUF_TX(type)						\
-static void mxc_spi_buf_tx_##type(struct mxc_spi_data *mxc_spi)		\
+static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx)		\
 {									\
 	type val = 0;							\
 									\
-	if (mxc_spi->tx_buf) {						\
-		val = *(type *)mxc_spi->tx_buf;				\
-		mxc_spi->tx_buf += sizeof(type);			\
+	if (spi_imx->tx_buf) {						\
+		val = *(type *)spi_imx->tx_buf;				\
+		spi_imx->tx_buf += sizeof(type);			\
 	}								\
 									\
-	mxc_spi->count -= sizeof(type);					\
+	spi_imx->count -= sizeof(type);					\
 									\
-	writel(val, mxc_spi->base + MXC_CSPITXDATA);			\
+	writel(val, spi_imx->base + MXC_CSPITXDATA);			\
 }
 
 MXC_SPI_BUF_RX(u8)
@@ -119,7 +119,7 @@ static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
 	256, 384, 512, 768, 1024};
 
 /* MX21, MX27 */
-static unsigned int mxc_spi_clkdiv_1(unsigned int fin,
+static unsigned int spi_imx_clkdiv_1(unsigned int fin,
 		unsigned int fspi)
 {
 	int i, max;
@@ -137,7 +137,7 @@ static unsigned int mxc_spi_clkdiv_1(unsigned int fin,
 }
 
 /* MX1, MX31, MX35 */
-static unsigned int mxc_spi_clkdiv_2(unsigned int fin,
+static unsigned int spi_imx_clkdiv_2(unsigned int fin,
 		unsigned int fspi)
 {
 	int i, div = 4;
@@ -174,7 +174,7 @@ static unsigned int mxc_spi_clkdiv_2(unsigned int fin,
  * the i.MX35 has a slightly different register layout for bits
  * we do not use here.
  */
-static void mx31_intctrl(struct mxc_spi_data *mxc_spi, int enable)
+static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
 {
 	unsigned int val = 0;
 
@@ -183,24 +183,24 @@ static void mx31_intctrl(struct mxc_spi_data *mxc_spi, int enable)
 	if (enable & MXC_INT_RR)
 		val |= MX31_INTREG_RREN;
 
-	writel(val, mxc_spi->base + MXC_CSPIINT);
+	writel(val, spi_imx->base + MXC_CSPIINT);
 }
 
-static void mx31_trigger(struct mxc_spi_data *mxc_spi)
+static void mx31_trigger(struct spi_imx_data *spi_imx)
 {
 	unsigned int reg;
 
-	reg = readl(mxc_spi->base + MXC_CSPICTRL);
+	reg = readl(spi_imx->base + MXC_CSPICTRL);
 	reg |= MX31_CSPICTRL_XCH;
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int mx31_config(struct mxc_spi_data *mxc_spi,
-		struct mxc_spi_config *config)
+static int mx31_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
 {
 	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
 
-	reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
 		MX31_CSPICTRL_DR_SHIFT;
 
 	if (cpu_is_mx31())
@@ -223,14 +223,14 @@ static int mx31_config(struct mxc_spi_data *mxc_spi,
 			reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
 	}
 
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
 
 	return 0;
 }
 
-static int mx31_rx_available(struct mxc_spi_data *mxc_spi)
+static int mx31_rx_available(struct spi_imx_data *spi_imx)
 {
-	return readl(mxc_spi->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
+	return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
 }
 
 #define MX27_INTREG_RR		(1 << 4)
@@ -246,7 +246,7 @@ static int mx31_rx_available(struct mxc_spi_data *mxc_spi)
 #define MX27_CSPICTRL_DR_SHIFT	14
 #define MX27_CSPICTRL_CS_SHIFT	19
 
-static void mx27_intctrl(struct mxc_spi_data *mxc_spi, int enable)
+static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
 {
 	unsigned int val = 0;
 
@@ -255,24 +255,24 @@ static void mx27_intctrl(struct mxc_spi_data *mxc_spi, int enable)
 	if (enable & MXC_INT_RR)
 		val |= MX27_INTREG_RREN;
 
-	writel(val, mxc_spi->base + MXC_CSPIINT);
+	writel(val, spi_imx->base + MXC_CSPIINT);
 }
 
-static void mx27_trigger(struct mxc_spi_data *mxc_spi)
+static void mx27_trigger(struct spi_imx_data *spi_imx)
 {
 	unsigned int reg;
 
-	reg = readl(mxc_spi->base + MXC_CSPICTRL);
+	reg = readl(spi_imx->base + MXC_CSPICTRL);
 	reg |= MX27_CSPICTRL_XCH;
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int mx27_config(struct mxc_spi_data *mxc_spi,
-		struct mxc_spi_config *config)
+static int mx27_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
 {
 	unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
 
-	reg |= mxc_spi_clkdiv_1(mxc_spi->spi_clk, config->speed_hz) <<
+	reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) <<
 		MX27_CSPICTRL_DR_SHIFT;
 	reg |= config->bpw - 1;
 
@@ -285,14 +285,14 @@ static int mx27_config(struct mxc_spi_data *mxc_spi,
 	if (config->cs < 0)
 		reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT;
 
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
 
 	return 0;
 }
 
-static int mx27_rx_available(struct mxc_spi_data *mxc_spi)
+static int mx27_rx_available(struct spi_imx_data *spi_imx)
 {
-	return readl(mxc_spi->base + MXC_CSPIINT) & MX27_INTREG_RR;
+	return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR;
 }
 
 #define MX1_INTREG_RR		(1 << 3)
@@ -306,7 +306,7 @@ static int mx27_rx_available(struct mxc_spi_data *mxc_spi)
 #define MX1_CSPICTRL_MASTER	(1 << 10)
 #define MX1_CSPICTRL_DR_SHIFT	13
 
-static void mx1_intctrl(struct mxc_spi_data *mxc_spi, int enable)
+static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
 {
 	unsigned int val = 0;
 
@@ -315,24 +315,24 @@ static void mx1_intctrl(struct mxc_spi_data *mxc_spi, int enable)
 	if (enable & MXC_INT_RR)
 		val |= MX1_INTREG_RREN;
 
-	writel(val, mxc_spi->base + MXC_CSPIINT);
+	writel(val, spi_imx->base + MXC_CSPIINT);
 }
 
-static void mx1_trigger(struct mxc_spi_data *mxc_spi)
+static void mx1_trigger(struct spi_imx_data *spi_imx)
 {
 	unsigned int reg;
 
-	reg = readl(mxc_spi->base + MXC_CSPICTRL);
+	reg = readl(spi_imx->base + MXC_CSPICTRL);
 	reg |= MX1_CSPICTRL_XCH;
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int mx1_config(struct mxc_spi_data *mxc_spi,
-		struct mxc_spi_config *config)
+static int mx1_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
 {
 	unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
 
-	reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
 		MX1_CSPICTRL_DR_SHIFT;
 	reg |= config->bpw - 1;
 
@@ -341,156 +341,151 @@ static int mx1_config(struct mxc_spi_data *mxc_spi,
 	if (config->mode & SPI_CPOL)
 		reg |= MX1_CSPICTRL_POL;
 
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
 
 	return 0;
 }
 
-static int mx1_rx_available(struct mxc_spi_data *mxc_spi)
+static int mx1_rx_available(struct spi_imx_data *spi_imx)
 {
-	return readl(mxc_spi->base + MXC_CSPIINT) & MX1_INTREG_RR;
+	return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
 }
 
-static void mxc_spi_chipselect(struct spi_device *spi, int is_active)
+static void spi_imx_chipselect(struct spi_device *spi, int is_active)
 {
-	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
-	unsigned int cs = 0;
-	int gpio = mxc_spi->chipselect[spi->chip_select];
-	struct mxc_spi_config config;
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	int gpio = spi_imx->chipselect[spi->chip_select];
+	int active = is_active != BITBANG_CS_INACTIVE;
+	int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
 
-	if (spi->mode & SPI_CS_HIGH)
-		cs = 1;
-
-	if (is_active == BITBANG_CS_INACTIVE) {
-		if (gpio >= 0)
-			gpio_set_value(gpio, !cs);
+	if (gpio < 0)
 		return;
-	}
-
-	config.bpw = spi->bits_per_word;
-	config.speed_hz = spi->max_speed_hz;
-	config.mode = spi->mode;
-	config.cs = mxc_spi->chipselect[spi->chip_select];
-
-	mxc_spi->config(mxc_spi, &config);
-
-	/* Initialize the functions for transfer */
-	if (config.bpw <= 8) {
-		mxc_spi->rx = mxc_spi_buf_rx_u8;
-		mxc_spi->tx = mxc_spi_buf_tx_u8;
-	} else if (config.bpw <= 16) {
-		mxc_spi->rx = mxc_spi_buf_rx_u16;
-		mxc_spi->tx = mxc_spi_buf_tx_u16;
-	} else if (config.bpw <= 32) {
-		mxc_spi->rx = mxc_spi_buf_rx_u32;
-		mxc_spi->tx = mxc_spi_buf_tx_u32;
-	} else
-		BUG();
 
-	if (gpio >= 0)
-		gpio_set_value(gpio, cs);
-
-	return;
+	gpio_set_value(gpio, dev_is_lowactive ^ active);
 }
 
-static void mxc_spi_push(struct mxc_spi_data *mxc_spi)
+static void spi_imx_push(struct spi_imx_data *spi_imx)
 {
-	while (mxc_spi->txfifo < 8) {
-		if (!mxc_spi->count)
+	while (spi_imx->txfifo < 8) {
+		if (!spi_imx->count)
 			break;
-		mxc_spi->tx(mxc_spi);
-		mxc_spi->txfifo++;
+		spi_imx->tx(spi_imx);
+		spi_imx->txfifo++;
 	}
 
-	mxc_spi->trigger(mxc_spi);
+	spi_imx->trigger(spi_imx);
 }
 
-static irqreturn_t mxc_spi_isr(int irq, void *dev_id)
+static irqreturn_t spi_imx_isr(int irq, void *dev_id)
 {
-	struct mxc_spi_data *mxc_spi = dev_id;
+	struct spi_imx_data *spi_imx = dev_id;
 
-	while (mxc_spi->rx_available(mxc_spi)) {
-		mxc_spi->rx(mxc_spi);
-		mxc_spi->txfifo--;
+	while (spi_imx->rx_available(spi_imx)) {
+		spi_imx->rx(spi_imx);
+		spi_imx->txfifo--;
 	}
 
-	if (mxc_spi->count) {
-		mxc_spi_push(mxc_spi);
+	if (spi_imx->count) {
+		spi_imx_push(spi_imx);
 		return IRQ_HANDLED;
 	}
 
-	if (mxc_spi->txfifo) {
+	if (spi_imx->txfifo) {
 		/* No data left to push, but still waiting for rx data,
 		 * enable receive data available interrupt.
 		 */
-		mxc_spi->intctrl(mxc_spi, MXC_INT_RR);
+		spi_imx->intctrl(spi_imx, MXC_INT_RR);
 		return IRQ_HANDLED;
 	}
 
-	mxc_spi->intctrl(mxc_spi, 0);
-	complete(&mxc_spi->xfer_done);
+	spi_imx->intctrl(spi_imx, 0);
+	complete(&spi_imx->xfer_done);
 
 	return IRQ_HANDLED;
 }
 
-static int mxc_spi_setupxfer(struct spi_device *spi,
+static int spi_imx_setupxfer(struct spi_device *spi,
 				 struct spi_transfer *t)
 {
-	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
-	struct mxc_spi_config config;
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	struct spi_imx_config config;
 
 	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
 	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
 	config.mode = spi->mode;
+	config.cs = spi_imx->chipselect[spi->chip_select];
+
+	if (!config.speed_hz)
+		config.speed_hz = spi->max_speed_hz;
+	if (!config.bpw)
+		config.bpw = spi->bits_per_word;
+	if (!config.speed_hz)
+		config.speed_hz = spi->max_speed_hz;
+
+	/* Initialize the functions for transfer */
+	if (config.bpw <= 8) {
+		spi_imx->rx = spi_imx_buf_rx_u8;
+		spi_imx->tx = spi_imx_buf_tx_u8;
+	} else if (config.bpw <= 16) {
+		spi_imx->rx = spi_imx_buf_rx_u16;
+		spi_imx->tx = spi_imx_buf_tx_u16;
+	} else if (config.bpw <= 32) {
+		spi_imx->rx = spi_imx_buf_rx_u32;
+		spi_imx->tx = spi_imx_buf_tx_u32;
+	} else
+		BUG();
 
-	mxc_spi->config(mxc_spi, &config);
+	spi_imx->config(spi_imx, &config);
 
 	return 0;
 }
 
-static int mxc_spi_transfer(struct spi_device *spi,
+static int spi_imx_transfer(struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
-	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 
-	mxc_spi->tx_buf = transfer->tx_buf;
-	mxc_spi->rx_buf = transfer->rx_buf;
-	mxc_spi->count = transfer->len;
-	mxc_spi->txfifo = 0;
+	spi_imx->tx_buf = transfer->tx_buf;
+	spi_imx->rx_buf = transfer->rx_buf;
+	spi_imx->count = transfer->len;
+	spi_imx->txfifo = 0;
 
-	init_completion(&mxc_spi->xfer_done);
+	init_completion(&spi_imx->xfer_done);
 
-	mxc_spi_push(mxc_spi);
+	spi_imx_push(spi_imx);
 
-	mxc_spi->intctrl(mxc_spi, MXC_INT_TE);
+	spi_imx->intctrl(spi_imx, MXC_INT_TE);
 
-	wait_for_completion(&mxc_spi->xfer_done);
+	wait_for_completion(&spi_imx->xfer_done);
 
 	return transfer->len;
 }
 
-static int mxc_spi_setup(struct spi_device *spi)
+static int spi_imx_setup(struct spi_device *spi)
 {
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	int gpio = spi_imx->chipselect[spi->chip_select];
 
 	pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
 		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
 
-	mxc_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+	if (gpio >= 0)
+		gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
+
+	spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
 
 	return 0;
 }
 
-static void mxc_spi_cleanup(struct spi_device *spi)
+static void spi_imx_cleanup(struct spi_device *spi)
 {
 }
 
-static int __init mxc_spi_probe(struct platform_device *pdev)
+static int __init spi_imx_probe(struct platform_device *pdev)
 {
 	struct spi_imx_master *mxc_platform_info;
 	struct spi_master *master;
-	struct mxc_spi_data *mxc_spi;
+	struct spi_imx_data *spi_imx;
 	struct resource *res;
 	int i, ret;
 
@@ -500,7 +495,7 @@ static int __init mxc_spi_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	master = spi_alloc_master(&pdev->dev, sizeof(struct mxc_spi_data));
+	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
 	if (!master)
 		return -ENOMEM;
 
@@ -509,32 +504,32 @@ static int __init mxc_spi_probe(struct platform_device *pdev)
 	master->bus_num = pdev->id;
 	master->num_chipselect = mxc_platform_info->num_chipselect;
 
-	mxc_spi = spi_master_get_devdata(master);
-	mxc_spi->bitbang.master = spi_master_get(master);
-	mxc_spi->chipselect = mxc_platform_info->chipselect;
+	spi_imx = spi_master_get_devdata(master);
+	spi_imx->bitbang.master = spi_master_get(master);
+	spi_imx->chipselect = mxc_platform_info->chipselect;
 
 	for (i = 0; i < master->num_chipselect; i++) {
-		if (mxc_spi->chipselect[i] < 0)
+		if (spi_imx->chipselect[i] < 0)
 			continue;
-		ret = gpio_request(mxc_spi->chipselect[i], DRIVER_NAME);
+		ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
 		if (ret) {
 			i--;
 			while (i > 0)
-				if (mxc_spi->chipselect[i] >= 0)
-					gpio_free(mxc_spi->chipselect[i--]);
+				if (spi_imx->chipselect[i] >= 0)
+					gpio_free(spi_imx->chipselect[i--]);
 			dev_err(&pdev->dev, "can't get cs gpios");
 			goto out_master_put;
 		}
-		gpio_direction_output(mxc_spi->chipselect[i], 1);
 	}
 
-	mxc_spi->bitbang.chipselect = mxc_spi_chipselect;
-	mxc_spi->bitbang.setup_transfer = mxc_spi_setupxfer;
-	mxc_spi->bitbang.txrx_bufs = mxc_spi_transfer;
-	mxc_spi->bitbang.master->setup = mxc_spi_setup;
-	mxc_spi->bitbang.master->cleanup = mxc_spi_cleanup;
+	spi_imx->bitbang.chipselect = spi_imx_chipselect;
+	spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
+	spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
+	spi_imx->bitbang.master->setup = spi_imx_setup;
+	spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
+	spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
-	init_completion(&mxc_spi->xfer_done);
+	init_completion(&spi_imx->xfer_done);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -549,58 +544,58 @@ static int __init mxc_spi_probe(struct platform_device *pdev)
 		goto out_gpio_free;
 	}
 
-	mxc_spi->base = ioremap(res->start, resource_size(res));
-	if (!mxc_spi->base) {
+	spi_imx->base = ioremap(res->start, resource_size(res));
+	if (!spi_imx->base) {
 		ret = -EINVAL;
 		goto out_release_mem;
 	}
 
-	mxc_spi->irq = platform_get_irq(pdev, 0);
-	if (!mxc_spi->irq) {
+	spi_imx->irq = platform_get_irq(pdev, 0);
+	if (!spi_imx->irq) {
 		ret = -EINVAL;
 		goto out_iounmap;
 	}
 
-	ret = request_irq(mxc_spi->irq, mxc_spi_isr, 0, DRIVER_NAME, mxc_spi);
+	ret = request_irq(spi_imx->irq, spi_imx_isr, 0, DRIVER_NAME, spi_imx);
 	if (ret) {
-		dev_err(&pdev->dev, "can't get irq%d: %d\n", mxc_spi->irq, ret);
+		dev_err(&pdev->dev, "can't get irq%d: %d\n", spi_imx->irq, ret);
 		goto out_iounmap;
 	}
 
 	if (cpu_is_mx31() || cpu_is_mx35()) {
-		mxc_spi->intctrl = mx31_intctrl;
-		mxc_spi->config = mx31_config;
-		mxc_spi->trigger = mx31_trigger;
-		mxc_spi->rx_available = mx31_rx_available;
+		spi_imx->intctrl = mx31_intctrl;
+		spi_imx->config = mx31_config;
+		spi_imx->trigger = mx31_trigger;
+		spi_imx->rx_available = mx31_rx_available;
 	} else  if (cpu_is_mx27() || cpu_is_mx21()) {
-		mxc_spi->intctrl = mx27_intctrl;
-		mxc_spi->config = mx27_config;
-		mxc_spi->trigger = mx27_trigger;
-		mxc_spi->rx_available = mx27_rx_available;
+		spi_imx->intctrl = mx27_intctrl;
+		spi_imx->config = mx27_config;
+		spi_imx->trigger = mx27_trigger;
+		spi_imx->rx_available = mx27_rx_available;
 	} else if (cpu_is_mx1()) {
-		mxc_spi->intctrl = mx1_intctrl;
-		mxc_spi->config = mx1_config;
-		mxc_spi->trigger = mx1_trigger;
-		mxc_spi->rx_available = mx1_rx_available;
+		spi_imx->intctrl = mx1_intctrl;
+		spi_imx->config = mx1_config;
+		spi_imx->trigger = mx1_trigger;
+		spi_imx->rx_available = mx1_rx_available;
 	} else
 		BUG();
 
-	mxc_spi->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(mxc_spi->clk)) {
+	spi_imx->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(spi_imx->clk)) {
 		dev_err(&pdev->dev, "unable to get clock\n");
-		ret = PTR_ERR(mxc_spi->clk);
+		ret = PTR_ERR(spi_imx->clk);
 		goto out_free_irq;
 	}
 
-	clk_enable(mxc_spi->clk);
-	mxc_spi->spi_clk = clk_get_rate(mxc_spi->clk);
+	clk_enable(spi_imx->clk);
+	spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
 
 	if (!cpu_is_mx31() || !cpu_is_mx35())
-		writel(1, mxc_spi->base + MXC_RESET);
+		writel(1, spi_imx->base + MXC_RESET);
 
-	mxc_spi->intctrl(mxc_spi, 0);
+	spi_imx->intctrl(spi_imx, 0);
 
-	ret = spi_bitbang_start(&mxc_spi->bitbang);
+	ret = spi_bitbang_start(&spi_imx->bitbang);
 	if (ret) {
 		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
 		goto out_clk_put;
@@ -611,18 +606,18 @@ static int __init mxc_spi_probe(struct platform_device *pdev)
 	return ret;
 
 out_clk_put:
-	clk_disable(mxc_spi->clk);
-	clk_put(mxc_spi->clk);
+	clk_disable(spi_imx->clk);
+	clk_put(spi_imx->clk);
 out_free_irq:
-	free_irq(mxc_spi->irq, mxc_spi);
+	free_irq(spi_imx->irq, spi_imx);
 out_iounmap:
-	iounmap(mxc_spi->base);
+	iounmap(spi_imx->base);
 out_release_mem:
 	release_mem_region(res->start, resource_size(res));
 out_gpio_free:
 	for (i = 0; i < master->num_chipselect; i++)
-		if (mxc_spi->chipselect[i] >= 0)
-			gpio_free(mxc_spi->chipselect[i]);
+		if (spi_imx->chipselect[i] >= 0)
+			gpio_free(spi_imx->chipselect[i]);
 out_master_put:
 	spi_master_put(master);
 	kfree(master);
@@ -630,24 +625,24 @@ out_master_put:
 	return ret;
 }
 
-static int __exit mxc_spi_remove(struct platform_device *pdev)
+static int __exit spi_imx_remove(struct platform_device *pdev)
 {
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(master);
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
 	int i;
 
-	spi_bitbang_stop(&mxc_spi->bitbang);
+	spi_bitbang_stop(&spi_imx->bitbang);
 
-	writel(0, mxc_spi->base + MXC_CSPICTRL);
-	clk_disable(mxc_spi->clk);
-	clk_put(mxc_spi->clk);
-	free_irq(mxc_spi->irq, mxc_spi);
-	iounmap(mxc_spi->base);
+	writel(0, spi_imx->base + MXC_CSPICTRL);
+	clk_disable(spi_imx->clk);
+	clk_put(spi_imx->clk);
+	free_irq(spi_imx->irq, spi_imx);
+	iounmap(spi_imx->base);
 
 	for (i = 0; i < master->num_chipselect; i++)
-		if (mxc_spi->chipselect[i] >= 0)
-			gpio_free(mxc_spi->chipselect[i]);
+		if (spi_imx->chipselect[i] >= 0)
+			gpio_free(spi_imx->chipselect[i]);
 
 	spi_master_put(master);
 
@@ -658,27 +653,27 @@ static int __exit mxc_spi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver mxc_spi_driver = {
+static struct platform_driver spi_imx_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
 		   .owner = THIS_MODULE,
 		   },
-	.probe = mxc_spi_probe,
-	.remove = __exit_p(mxc_spi_remove),
+	.probe = spi_imx_probe,
+	.remove = __exit_p(spi_imx_remove),
 };
 
-static int __init mxc_spi_init(void)
+static int __init spi_imx_init(void)
 {
-	return platform_driver_register(&mxc_spi_driver);
+	return platform_driver_register(&spi_imx_driver);
 }
 
-static void __exit mxc_spi_exit(void)
+static void __exit spi_imx_exit(void)
 {
-	platform_driver_unregister(&mxc_spi_driver);
+	platform_driver_unregister(&spi_imx_driver);
 }
 
-module_init(mxc_spi_init);
-module_exit(mxc_spi_exit);
+module_init(spi_imx_init);
+module_exit(spi_imx_exit);
 
 MODULE_DESCRIPTION("SPI Master Controller driver");
 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index f921bd1109e1..5d23983f02fc 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -537,7 +537,7 @@ static int spidev_release(struct inode *inode, struct file *filp)
 	return status;
 }
 
-static struct file_operations spidev_fops = {
+static const struct file_operations spidev_fops = {
 	.owner =	THIS_MODULE,
 	/* REVISIT switch to aio primitives, so that userspace
 	 * gets more complete API coverage.  It'll simplify things
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 9a4dd5992f65..7df3ba4f1f4d 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -59,8 +59,6 @@ source "drivers/staging/echo/Kconfig"
 
 source "drivers/staging/poch/Kconfig"
 
-source "drivers/staging/agnx/Kconfig"
-
 source "drivers/staging/otus/Kconfig"
 
 source "drivers/staging/rt2860/Kconfig"
@@ -129,7 +127,5 @@ source "drivers/staging/sep/Kconfig"
 
 source "drivers/staging/iio/Kconfig"
 
-source "drivers/staging/cowloop/Kconfig"
-
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 104f2f8897ec..747571172269 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_W35UND)		+= winbond/
 obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_ECHO)		+= echo/
 obj-$(CONFIG_POCH)		+= poch/
-obj-$(CONFIG_AGNX)		+= agnx/
 obj-$(CONFIG_OTUS)		+= otus/
 obj-$(CONFIG_RT2860)		+= rt2860/
 obj-$(CONFIG_RT2870)		+= rt2870/
@@ -46,4 +45,3 @@ obj-$(CONFIG_VME_BUS)		+= vme/
 obj-$(CONFIG_RAR_REGISTER)	+= rar/
 obj-$(CONFIG_DX_SEP)		+= sep/
 obj-$(CONFIG_IIO)		+= iio/
-obj-$(CONFIG_COWLOOP)		+= cowloop/
diff --git a/drivers/staging/agnx/Kconfig b/drivers/staging/agnx/Kconfig
deleted file mode 100644
index 7f43549e36dd..000000000000
--- a/drivers/staging/agnx/Kconfig
+++ /dev/null
@@ -1,5 +0,0 @@
-config AGNX
-	tristate "Wireless Airgo AGNX support"
-	depends on WLAN_80211 && MAC80211
-	---help---
-	  This is an experimental driver for Airgo AGNX00 wireless chip.
diff --git a/drivers/staging/agnx/Makefile b/drivers/staging/agnx/Makefile
deleted file mode 100644
index 1216564a312d..000000000000
--- a/drivers/staging/agnx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-obj-$(CONFIG_AGNX)	+= agnx.o
-
-agnx-objs :=	rf.o	\
-		pci.o	\
-		xmit.o	\
-		table.o	\
-		sta.o	\
-		phy.o
diff --git a/drivers/staging/agnx/TODO b/drivers/staging/agnx/TODO
deleted file mode 100644
index 89bec74318aa..000000000000
--- a/drivers/staging/agnx/TODO
+++ /dev/null
@@ -1,22 +0,0 @@
-2008 7/18
-
-The RX has can't receive OFDM packet correctly,
-Guess it need be do RX calibrate.
-
-
-before 2008 3/1
-
-1: The RX get too much "CRC failed" pakets, it make the card work very unstable,
-2: After running a while, the card will get infinity "RX Frame" and "Error"
-interrupt, not know the root reason so far, try to fix it
-3: Using two tx queue txd and txm but not only txm.
-4: Set the hdr correctly.
-5: Try to do recalibrate correvtly
-6: To support G mode in future
-7: Fix the mac address can't be readed and set correctly in BE machine.
-8: Fix include and exclude FCS in promisous mode and manage mode
-9: Using sta_notify to notice sta change
-10: Turn on frame reception at the end of start
-11: Guess the card support HW_MULTICAST_FILTER
-12: The tx process should be implment atomic?
-13: Using mac80211 function to control the TX&RX LED.
diff --git a/drivers/staging/agnx/agnx.h b/drivers/staging/agnx/agnx.h
deleted file mode 100644
index 3963d2597a11..000000000000
--- a/drivers/staging/agnx/agnx.h
+++ /dev/null
@@ -1,156 +0,0 @@
-#ifndef AGNX_H_
-#define AGNX_H_
-
-#include <linux/io.h>
-
-#include "xmit.h"
-
-#define PFX				KBUILD_MODNAME ": "
-
-static inline u32 agnx_read32(void __iomem *mem_region, u32 offset)
-{
-	return ioread32(mem_region + offset);
-}
-
-static inline void agnx_write32(void __iomem *mem_region, u32 offset, u32 val)
-{
-	iowrite32(val, mem_region + offset);
-}
-
-/* static const struct ieee80211_rate agnx_rates_80211b[] = { */
-/* 	{ .rate = 10, */
-/* 	  .val = 0xa, */
-/* 	  .flags = IEEE80211_RATE_CCK }, */
-/* 	{ .rate = 20, */
-/* 	  .val = 0x14, */
-/* 	  .hw_value = -0x14, */
-/* 	  .flags = IEEE80211_RATE_CCK_2 }, */
-/* 	{ .rate = 55, */
-/* 	  .val = 0x37, */
-/* 	  .val2 = -0x37, */
-/* 	  .flags = IEEE80211_RATE_CCK_2 }, */
-/* 	{ .rate = 110, */
-/* 	  .val = 0x6e, */
-/* 	  .val2 = -0x6e, */
-/* 	  .flags = IEEE80211_RATE_CCK_2 } */
-/* }; */
-
-
-static const struct ieee80211_rate agnx_rates_80211g[] = {
-/* 	{ .bitrate = 10, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, */
-/* 	{ .bitrate = 20, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, */
-/* 	{ .bitrate = 55, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, */
-/* 	{ .bitrate = 110, .hw_value = 4, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, */
-	{ .bitrate = 10, .hw_value = 1, },
-	{ .bitrate = 20, .hw_value = 2, },
-	{ .bitrate = 55, .hw_value = 3, },
-	{ .bitrate = 110, .hw_value = 4,},
-
-	{ .bitrate = 60, .hw_value = 0xB, },
-	{ .bitrate = 90, .hw_value = 0xF, },
-	{ .bitrate = 120, .hw_value = 0xA },
-	{ .bitrate = 180, .hw_value = 0xE, },
-/*	{ .bitrate = 240, .hw_value = 0xd, }, */
-	{ .bitrate = 360, .hw_value = 0xD, },
-	{ .bitrate = 480, .hw_value = 0x8, },
-	{ .bitrate = 540, .hw_value = 0xC, },
-};
-
-static const struct ieee80211_channel agnx_channels[] = {
-	{ .center_freq = 2412, .hw_value = 1, },
-	{ .center_freq = 2417, .hw_value = 2, },
-	{ .center_freq = 2422, .hw_value = 3, },
-	{ .center_freq = 2427, .hw_value = 4, },
-	{ .center_freq = 2432, .hw_value = 5, },
-	{ .center_freq = 2437, .hw_value = 6, },
-	{ .center_freq = 2442, .hw_value = 7, },
-	{ .center_freq = 2447, .hw_value = 8, },
-	{ .center_freq = 2452, .hw_value = 9, },
-	{ .center_freq = 2457, .hw_value = 10, },
-	{ .center_freq = 2462, .hw_value = 11, },
-	{ .center_freq = 2467, .hw_value = 12, },
-	{ .center_freq = 2472, .hw_value = 13, },
-	{ .center_freq = 2484, .hw_value = 14, },
-};
-
-#define NUM_DRIVE_MODES	2
-/* Agnx operate mode */
-enum {
-	AGNX_MODE_80211A,
-	AGNX_MODE_80211A_OOB,
-	AGNX_MODE_80211A_MIMO,
-	AGNX_MODE_80211B_SHORT,
-	AGNX_MODE_80211B_LONG,
-	AGNX_MODE_80211G,
-	AGNX_MODE_80211G_OOB,
-	AGNX_MODE_80211G_MIMO,
-};
-
-enum {
-	AGNX_UNINIT,
-	AGNX_START,
-	AGNX_STOP,
-};
-
-struct agnx_priv {
-	struct pci_dev *pdev;
-	struct ieee80211_hw *hw;
-
-	spinlock_t lock;
-	struct mutex mutex;
-	unsigned int init_status;
-
-	void __iomem *ctl;	/* pointer to base ram address */
-	void __iomem *data;	/* pointer to mem region #2 */
-
-	struct agnx_ring rx;
-	struct agnx_ring txm;
-	struct agnx_ring txd;
-
-	/* Need volatile? */
-	u32 irq_status;
-
-	struct delayed_work periodic_work; /* Periodic tasks like recalibrate */
-	struct ieee80211_low_level_stats stats;
-
-	/* unsigned int phymode; */
-	int mode;
-	int channel;
-	u8 bssid[ETH_ALEN];
-
-	u8 mac_addr[ETH_ALEN];
-	u8 revid;
-
-	struct ieee80211_supported_band band;
-};
-
-
-#define AGNX_CHAINS_MAX	6
-#define AGNX_PERIODIC_DELAY 60000 /* unit: ms */
-#define LOCAL_STAID	0	/* the station entry for the card itself */
-#define BSSID_STAID	1	/* the station entry for the bsssid AP */
-#define	spi_delay()	udelay(40)
-#define eeprom_delay()	udelay(40)
-#define	routing_table_delay()	udelay(50)
-
-/* PDU pool MEM region #2 */
-#define AGNX_PDUPOOL		0x40000	/* PDU pool */
-#define AGNX_PDUPOOL_SIZE	0x8000	/* PDU pool size*/
-#define AGNX_PDU_TX_WQ		0x41000	/* PDU list TX workqueue */
-#define AGNX_PDU_FREE		0x41800	/* Free Pool */
-#define PDU_SIZE		0x80	/* Free Pool node size */
-#define PDU_FREE_CNT		0xd0 /* Free pool node count */
-
-
-/* RF stuffs */
-extern void rf_chips_init(struct agnx_priv *priv);
-extern void spi_rc_write(void __iomem *mem_region, u32 chip_ids, u32 sw);
-extern void calibrate_oscillator(struct agnx_priv *priv);
-extern void do_calibration(struct agnx_priv *priv);
-extern void antenna_calibrate(struct agnx_priv *priv);
-extern void __antenna_calibrate(struct agnx_priv *priv);
-extern void print_offsets(struct agnx_priv *priv);
-extern int agnx_set_channel(struct agnx_priv *priv, unsigned int channel);
-
-
-#endif /* AGNX_H_ */
diff --git a/drivers/staging/agnx/debug.h b/drivers/staging/agnx/debug.h
deleted file mode 100644
index 7947f327a214..000000000000
--- a/drivers/staging/agnx/debug.h
+++ /dev/null
@@ -1,416 +0,0 @@
-#ifndef AGNX_DEBUG_H_
-#define AGNX_DEBUG_H_
-
-#include "agnx.h"
-#include "phy.h"
-#include "sta.h"
-#include "xmit.h"
-
-#define AGNX_TRACE              printk(KERN_ERR PFX "function:%s line:%d\n", __func__, __LINE__)
-
-#define PRINTK_LE16(prefix, var)	printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.4x\n", le16_to_cpu(var))
-#define PRINTK_LE32(prefix, var)	printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.8x\n", le32_to_cpu(var))
-#define PRINTK_U8(prefix, var) 		printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.2x\n", var)
-#define PRINTK_BE16(prefix, var)	printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.4x\n", be16_to_cpu(var))
-#define PRINTK_BE32(prefix, var)	printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.8x\n", be32_to_cpu(var))
-#define PRINTK_BITS(prefix, field)    	printk(KERN_DEBUG PFX #prefix ": " #field ": 0x%x\n", (reg & field) >> field##_SHIFT)
-
-static inline void agnx_bug(char *reason)
-{
-	printk(KERN_ERR PFX "%s\n", reason);
-	BUG();
-}
-
-static inline void agnx_print_desc(struct agnx_desc *desc)
-{
-	u32 reg = be32_to_cpu(desc->frag);
-
-	PRINTK_BITS(DESC, PACKET_LEN);
-
-	if (reg & FIRST_FRAG) {
-		PRINTK_BITS(DESC, FIRST_PACKET_MASK);
-		PRINTK_BITS(DESC, FIRST_RESERV2);
-		PRINTK_BITS(DESC, FIRST_TKIP_ERROR);
-		PRINTK_BITS(DESC, FIRST_TKIP_PACKET);
-		PRINTK_BITS(DESC, FIRST_RESERV1);
-		PRINTK_BITS(DESC, FIRST_FRAG_LEN);
-	} else {
-		PRINTK_BITS(DESC, SUB_RESERV2);
-		PRINTK_BITS(DESC, SUB_TKIP_ERROR);
-		PRINTK_BITS(DESC, SUB_TKIP_PACKET);
-		PRINTK_BITS(DESC, SUB_RESERV1);
-		PRINTK_BITS(DESC, SUB_FRAG_LEN);
-	}
-
-	PRINTK_BITS(DESC, FIRST_FRAG);
-	PRINTK_BITS(DESC, LAST_FRAG);
-	PRINTK_BITS(DESC, OWNER);
-}
-
-
-static inline void dump_ieee80211b_phy_hdr(__be32 _11b0, __be32 _11b1)
-{
-
-}
-
-static inline void agnx_print_hdr(struct agnx_hdr *hdr)
-{
-	u32 reg;
-	int i;
-
-	reg = be32_to_cpu(hdr->reg0);
-	PRINTK_BITS(HDR, RTS);
-	PRINTK_BITS(HDR, MULTICAST);
-	PRINTK_BITS(HDR, ACK);
-	PRINTK_BITS(HDR, TM);
-	PRINTK_BITS(HDR, RELAY);
-	PRINTK_BITS(HDR, REVISED_FCS);
-	PRINTK_BITS(HDR, NEXT_BUFFER_ADDR);
-
-	reg = be32_to_cpu(hdr->reg1);
-	PRINTK_BITS(HDR, MAC_HDR_LEN);
-	PRINTK_BITS(HDR, DURATION_OVERIDE);
-	PRINTK_BITS(HDR, PHY_HDR_OVERIDE);
-	PRINTK_BITS(HDR, CRC_FAIL);
-	PRINTK_BITS(HDR, SEQUENCE_NUMBER);
-	PRINTK_BITS(HDR, BUFF_HEAD_ADDR);
-
-	reg = be32_to_cpu(hdr->reg2);
-	PRINTK_BITS(HDR, PDU_COUNT);
-	PRINTK_BITS(HDR, WEP_KEY);
-	PRINTK_BITS(HDR, USES_WEP_KEY);
-	PRINTK_BITS(HDR, KEEP_ALIVE);
-	PRINTK_BITS(HDR, BUFF_TAIL_ADDR);
-
-	reg = be32_to_cpu(hdr->reg3);
-	PRINTK_BITS(HDR, CTS_11G);
-	PRINTK_BITS(HDR, RTS_11G);
-	PRINTK_BITS(HDR, FRAG_SIZE);
-	PRINTK_BITS(HDR, PAYLOAD_LEN);
-	PRINTK_BITS(HDR, FRAG_NUM);
-
-	reg = be32_to_cpu(hdr->reg4);
-	PRINTK_BITS(HDR, RELAY_STAID);
-	PRINTK_BITS(HDR, STATION_ID);
-	PRINTK_BITS(HDR, WORKQUEUE_ID);
-
-	reg = be32_to_cpu(hdr->reg5);
-	/* printf the route flag */
-	PRINTK_BITS(HDR, ROUTE_HOST);
-	PRINTK_BITS(HDR, ROUTE_CARD_CPU);
-	PRINTK_BITS(HDR, ROUTE_ENCRYPTION);
-	PRINTK_BITS(HDR, ROUTE_TX);
-	PRINTK_BITS(HDR, ROUTE_RX1);
-	PRINTK_BITS(HDR, ROUTE_RX2);
-	PRINTK_BITS(HDR, ROUTE_COMPRESSION);
-
-	PRINTK_BE32(HDR, hdr->_11g0);
-	PRINTK_BE32(HDR, hdr->_11g1);
-	PRINTK_BE32(HDR, hdr->_11b0);
-	PRINTK_BE32(HDR, hdr->_11b1);
-
-	dump_ieee80211b_phy_hdr(hdr->_11b0, hdr->_11b1);
-
-	/* Fixme */
-	for (i = 0; i < ARRAY_SIZE(hdr->mac_hdr); i++) {
-		if (i == 0)
-			printk(KERN_DEBUG PFX "IEEE80211 HDR: ");
-		printk("%.2x ", hdr->mac_hdr[i]);
-		if (i + 1 == ARRAY_SIZE(hdr->mac_hdr))
-			printk("\n");
-	}
-
-	PRINTK_BE16(HDR, hdr->rts_duration);
-	PRINTK_BE16(HDR, hdr->last_duration);
-	PRINTK_BE16(HDR, hdr->sec_last_duration);
-	PRINTK_BE16(HDR, hdr->other_duration);
-	PRINTK_BE16(HDR, hdr->tx_other_duration);
-	PRINTK_BE16(HDR, hdr->last_11g_len);
-	PRINTK_BE16(HDR, hdr->other_11g_len);
-	PRINTK_BE16(HDR, hdr->last_11b_len);
-	PRINTK_BE16(HDR, hdr->other_11b_len);
-
-	/* FIXME */
-	reg = be16_to_cpu(hdr->reg6);
-	PRINTK_BITS(HDR, MBF);
-	PRINTK_BITS(HDR, RSVD4);
-
-	PRINTK_BE16(HDR, hdr->rx_frag_stat);
-
-	PRINTK_BE32(HDR, hdr->time_stamp);
-	PRINTK_BE32(HDR, hdr->phy_stats_hi);
-	PRINTK_BE32(HDR, hdr->phy_stats_lo);
-	PRINTK_BE32(HDR, hdr->mic_key0);
-	PRINTK_BE32(HDR, hdr->mic_key1);
-} /* agnx_print_hdr */
-
-
-static inline void agnx_print_rx_hdr(struct agnx_hdr *hdr)
-{
-	agnx_print_hdr(hdr);
-
-	PRINTK_BE16(HDR, hdr->rx.rx_packet_duration);
-	PRINTK_BE16(HDR, hdr->rx.replay_cnt);
-
-	PRINTK_U8(HDR, hdr->rx_channel);
-}
-
-static inline void agnx_print_tx_hdr(struct agnx_hdr *hdr)
-{
-	agnx_print_hdr(hdr);
-
-	PRINTK_U8(HDR, hdr->tx.long_retry_limit);
-	PRINTK_U8(HDR, hdr->tx.short_retry_limit);
-	PRINTK_U8(HDR, hdr->tx.long_retry_cnt);
-	PRINTK_U8(HDR, hdr->tx.short_retry_cnt);
-
-	PRINTK_U8(HDR, hdr->rx_channel);
-}
-
-static inline void
-agnx_print_sta_power(struct agnx_priv *priv, unsigned int sta_idx)
-{
-	struct agnx_sta_power power;
-	u32 reg;
-
-	get_sta_power(priv, &power, sta_idx);
-
-	reg = le32_to_cpu(power.reg);
-	PRINTK_BITS(STA_POWER, SIGNAL);
-	PRINTK_BITS(STA_POWER, RATE);
-	PRINTK_BITS(STA_POWER, TIFS);
-	PRINTK_BITS(STA_POWER, EDCF);
-	PRINTK_BITS(STA_POWER, CHANNEL_BOND);
-	PRINTK_BITS(STA_POWER, PHY_MODE);
-	PRINTK_BITS(STA_POWER, POWER_LEVEL);
-	PRINTK_BITS(STA_POWER, NUM_TRANSMITTERS);
-}
-
-static inline void
-agnx_print_sta_tx_wq(struct agnx_priv *priv, unsigned int sta_idx, unsigned int wq_idx)
-{
-	struct agnx_sta_tx_wq tx_wq;
-	u32 reg;
-
-	get_sta_tx_wq(priv, &tx_wq, sta_idx, wq_idx);
-
-	reg = le32_to_cpu(tx_wq.reg0);
-	PRINTK_BITS(STA_TX_WQ, TAIL_POINTER);
-	PRINTK_BITS(STA_TX_WQ, HEAD_POINTER_LOW);
-
-	reg = le32_to_cpu(tx_wq.reg3);
-	PRINTK_BITS(STA_TX_WQ, HEAD_POINTER_HIGH);
-	PRINTK_BITS(STA_TX_WQ, ACK_POINTER_LOW);
-
-	reg = le32_to_cpu(tx_wq.reg1);
-	PRINTK_BITS(STA_TX_WQ, ACK_POINTER_HIGH);
-	PRINTK_BITS(STA_TX_WQ, HEAD_TIMOUT_TAIL_PACK_CNT);
-	PRINTK_BITS(STA_TX_WQ, ACK_TIMOUT_TAIL_PACK_CNT);
-
-	reg = le32_to_cpu(tx_wq.reg2);
-	PRINTK_BITS(STA_TX_WQ, HEAD_TIMOUT_WIN_LIM_BYTE_CNT);
-	PRINTK_BITS(STA_TX_WQ, HEAD_TIMOUT_WIN_LIM_FRAG_CNT);
-	PRINTK_BITS(STA_TX_WQ, WORK_QUEUE_ACK_TYPE);
-	PRINTK_BITS(STA_TX_WQ, WORK_QUEUE_VALID);
-}
-
-static inline void agnx_print_sta_traffic(struct agnx_sta_traffic *traffic)
-{
-	u32 reg;
-
-	reg = le32_to_cpu(traffic->reg0);
-	PRINTK_BITS(STA_TRAFFIC, ACK_TIMOUT_CNT);
-	PRINTK_BITS(STA_TRAFFIC, TRAFFIC_ACK_TYPE);
-	PRINTK_BITS(STA_TRAFFIC, NEW_PACKET);
-	PRINTK_BITS(STA_TRAFFIC, TRAFFIC_VALID);
-	PRINTK_BITS(STA_TRAFFIC, RX_HDR_DESC_POINTER);
-
-	reg = le32_to_cpu(traffic->reg1);
-	PRINTK_BITS(STA_TRAFFIC, RX_PACKET_TIMESTAMP);
-	PRINTK_BITS(STA_TRAFFIC, TRAFFIC_RESERVED);
-	PRINTK_BITS(STA_TRAFFIC, SV);
-	PRINTK_BITS(STA_TRAFFIC, RX_SEQUENCE_NUM);
-
-	PRINTK_LE32(STA_TRAFFIC, traffic->tx_replay_cnt_low);
-
-	PRINTK_LE16(STA_TRAFFIC, traffic->tx_replay_cnt_high);
-	PRINTK_LE16(STA_TRAFFIC, traffic->rx_replay_cnt_high);
-
-	PRINTK_LE32(STA_TRAFFIC, traffic->rx_replay_cnt_low);
-}
-
-static inline void agnx_print_sta(struct agnx_priv *priv, unsigned int sta_idx)
-{
-	struct agnx_sta station;
-	struct agnx_sta *sta = &station;
-	u32 reg;
-	unsigned int i;
-
-	get_sta(priv, sta, sta_idx);
-
-	for (i = 0; i < 4; i++)
-		PRINTK_LE32(STA, sta->tx_session_keys[i]);
-	for (i = 0; i < 4; i++)
-		PRINTK_LE32(STA, sta->rx_session_keys[i]);
-
-	reg = le32_to_cpu(sta->reg);
-	PRINTK_BITS(STA, ID_1);
-	PRINTK_BITS(STA, ID_0);
-	PRINTK_BITS(STA, ENABLE_CONCATENATION);
-	PRINTK_BITS(STA, ENABLE_DECOMPRESSION);
-	PRINTK_BITS(STA, STA_RESERVED);
-	PRINTK_BITS(STA, EAP);
-	PRINTK_BITS(STA, ED_NULL);
-	PRINTK_BITS(STA, ENCRYPTION_POLICY);
-	PRINTK_BITS(STA, DEFINED_KEY_ID);
-	PRINTK_BITS(STA, FIXED_KEY);
-	PRINTK_BITS(STA, KEY_VALID);
-	PRINTK_BITS(STA, STATION_VALID);
-
-	PRINTK_LE32(STA, sta->tx_aes_blks_unicast);
-	PRINTK_LE32(STA, sta->rx_aes_blks_unicast);
-
-	PRINTK_LE16(STA, sta->aes_format_err_unicast_cnt);
-	PRINTK_LE16(STA, sta->aes_replay_unicast);
-
-	PRINTK_LE16(STA, sta->aes_decrypt_err_unicast);
-	PRINTK_LE16(STA, sta->aes_decrypt_err_default);
-
-	PRINTK_LE16(STA, sta->single_retry_packets);
-	PRINTK_LE16(STA, sta->failed_tx_packets);
-
-	PRINTK_LE16(STA, sta->muti_retry_packets);
-	PRINTK_LE16(STA, sta->ack_timeouts);
-
-	PRINTK_LE16(STA, sta->frag_tx_cnt);
-	PRINTK_LE16(STA, sta->rts_brq_sent);
-
-	PRINTK_LE16(STA, sta->tx_packets);
-	PRINTK_LE16(STA, sta->cts_back_timeout);
-
-	PRINTK_LE32(STA, sta->phy_stats_high);
-	PRINTK_LE32(STA, sta->phy_stats_low);
-
-	/* for (i = 0; i < 8; i++) */
-	agnx_print_sta_traffic(sta->traffic + 0);
-
-	PRINTK_LE16(STA, sta->traffic_class0_frag_success);
-	PRINTK_LE16(STA, sta->traffic_class1_frag_success);
-	PRINTK_LE16(STA, sta->traffic_class2_frag_success);
-	PRINTK_LE16(STA, sta->traffic_class3_frag_success);
-	PRINTK_LE16(STA, sta->traffic_class4_frag_success);
-	PRINTK_LE16(STA, sta->traffic_class5_frag_success);
-	PRINTK_LE16(STA, sta->traffic_class6_frag_success);
-	PRINTK_LE16(STA, sta->traffic_class7_frag_success);
-
-	PRINTK_LE16(STA, sta->num_frag_non_prime_rates);
-	PRINTK_LE16(STA, sta->ack_timeout_non_prime_rates);
-}
-
-
-static inline void dump_ieee80211_hdr(struct ieee80211_hdr *hdr, char *tag)
-{
-	u16 fctl;
-	int hdrlen;
-
-	fctl = le16_to_cpu(hdr->frame_control);
-	switch (fctl & IEEE80211_FCTL_FTYPE) {
-	case IEEE80211_FTYPE_DATA:
-		printk(PFX "%s DATA ", tag);
-		break;
-	case IEEE80211_FTYPE_CTL:
-		printk(PFX "%s CTL ", tag);
-		break;
-	case IEEE80211_FTYPE_MGMT:
-		printk(PFX "%s MGMT ", tag);
-		switch (fctl & IEEE80211_FCTL_STYPE) {
-		case IEEE80211_STYPE_ASSOC_REQ:
-			printk("SubType: ASSOC_REQ ");
-			break;
-		case IEEE80211_STYPE_ASSOC_RESP:
-			printk("SubType: ASSOC_RESP ");
-			break;
-		case IEEE80211_STYPE_REASSOC_REQ:
-			printk("SubType: REASSOC_REQ ");
-			break;
-		case IEEE80211_STYPE_REASSOC_RESP:
-			printk("SubType: REASSOC_RESP ");
-			break;
-		case IEEE80211_STYPE_PROBE_REQ:
-			printk("SubType: PROBE_REQ ");
-			break;
-		case IEEE80211_STYPE_PROBE_RESP:
-			printk("SubType: PROBE_RESP ");
-			break;
-		case IEEE80211_STYPE_BEACON:
-			printk("SubType: BEACON ");
-			break;
-		case IEEE80211_STYPE_ATIM:
-			printk("SubType: ATIM ");
-			break;
-		case IEEE80211_STYPE_DISASSOC:
-			printk("SubType: DISASSOC ");
-			break;
-		case IEEE80211_STYPE_AUTH:
-			printk("SubType: AUTH ");
-			break;
-		case IEEE80211_STYPE_DEAUTH:
-			printk("SubType: DEAUTH ");
-			break;
-		case IEEE80211_STYPE_ACTION:
-			printk("SubType: ACTION ");
-			break;
-		default:
-			printk("SubType: Unknow\n");
-		}
-		break;
-	default:
-		printk(PFX "%s Packet type: Unknow\n", tag);
-	}
-
-	hdrlen = ieee80211_hdrlen(fctl);
-
-	if (hdrlen >= 4)
-		printk("FC=0x%04x DUR=0x%04x",
-		       fctl, le16_to_cpu(hdr->duration_id));
-	if (hdrlen >= 10)
-		printk(" A1=%pM", hdr->addr1);
-	if (hdrlen >= 16)
-		printk(" A2=%pM", hdr->addr2);
-	if (hdrlen >= 24)
-		printk(" A3=%pM", hdr->addr3);
-	if (hdrlen >= 30)
-		printk(" A4=%pM", hdr->addr4);
-	printk("\n");
-}
-
-static inline void dump_txm_registers(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	int i;
-	for (i = 0; i <= 0x1e8; i += 4)
-		printk(KERN_DEBUG PFX "TXM: %x---> 0x%.8x\n", i, ioread32(ctl + i));
-}
-static inline void dump_rxm_registers(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	int i;
-	for (i = 0; i <= 0x108; i += 4)
-		printk(KERN_DEBUG PFX "RXM: %x---> 0x%.8x\n", i, ioread32(ctl + 0x2000 + i));
-}
-static inline void dump_bm_registers(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	int i;
-	for (i = 0; i <= 0x90; i += 4)
-		printk(KERN_DEBUG PFX "BM: %x---> 0x%.8x\n", i, ioread32(ctl + 0x2c00 + i));
-}
-static inline void dump_cir_registers(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	int i;
-	for (i = 0; i <= 0xb8; i += 4)
-		printk(KERN_DEBUG PFX "CIR: %x---> 0x%.8x\n", i, ioread32(ctl + 0x3000 + i));
-}
-
-#endif /* AGNX_DEBUG_H_ */
diff --git a/drivers/staging/agnx/pci.c b/drivers/staging/agnx/pci.c
deleted file mode 100644
index 32b5489456a8..000000000000
--- a/drivers/staging/agnx/pci.c
+++ /dev/null
@@ -1,635 +0,0 @@
-/**
- * Airgo MIMO wireless driver
- *
- * Copyright (c) 2007 Li YanBo <dreamfly281@gmail.com>
-
- * Thanks for Jeff Williams <angelbane@gmail.com> do reverse engineer
- * works and published the SPECS at http://airgo.wdwconsulting.net/mymoin
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/etherdevice.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "agnx.h"
-#include "debug.h"
-#include "xmit.h"
-#include "phy.h"
-
-MODULE_AUTHOR("Li YanBo <dreamfly281@gmail.com>");
-MODULE_DESCRIPTION("Airgo MIMO PCI wireless driver");
-MODULE_LICENSE("GPL");
-
-static struct pci_device_id agnx_pci_id_tbl[] __devinitdata = {
-	{ PCI_DEVICE(0x17cb, 0x0001) },	/* Beklin F5d8010, Netgear WGM511 etc */
-	{ PCI_DEVICE(0x17cb, 0x0002) },	/* Netgear Wpnt511 */
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, agnx_pci_id_tbl);
-
-
-static inline void agnx_interrupt_ack(struct agnx_priv *priv, u32 *reason)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-
-	if (*reason & AGNX_STAT_RX) {
-		/* Mark complete RX */
-		reg = ioread32(ctl + AGNX_CIR_RXCTL);
-		reg |= 0x4;
-		iowrite32(reg, ctl + AGNX_CIR_RXCTL);
-		/* disable Rx interrupt */
-	}
-	if (*reason & AGNX_STAT_TX) {
-		reg = ioread32(ctl + AGNX_CIR_TXDCTL);
-		if (reg & 0x4) {
-			iowrite32(reg, ctl + AGNX_CIR_TXDCTL);
-			*reason |= AGNX_STAT_TXD;
-		}
-		reg = ioread32(ctl + AGNX_CIR_TXMCTL);
-		if (reg & 0x4) {
-			iowrite32(reg, ctl + AGNX_CIR_TXMCTL);
-			*reason |= AGNX_STAT_TXM;
-		}
-	}
-#if 0
-	if (*reason & AGNX_STAT_X) {
-		reg = ioread32(ctl + AGNX_INT_STAT);
-		iowrite32(reg, ctl + AGNX_INT_STAT);
-		/* FIXME reinit interrupt mask */
-		reg = 0xc390bf9 & ~IRQ_TX_BEACON;
-		reg &= ~IRQ_TX_DISABLE;
-		iowrite32(reg, ctl + AGNX_INT_MASK);
-		iowrite32(0x800, ctl + AGNX_CIR_BLKCTL);
-	}
-#endif
-} /* agnx_interrupt_ack */
-
-static irqreturn_t agnx_interrupt_handler(int irq, void *dev_id)
-{
-	struct ieee80211_hw *dev = dev_id;
-	struct agnx_priv *priv = dev->priv;
-	void __iomem *ctl = priv->ctl;
-	irqreturn_t ret = IRQ_NONE;
-	u32 irq_reason;
-
-	spin_lock(&priv->lock);
-
-/*	printk(KERN_ERR PFX "Get a interrupt %s\n", __func__); */
-
-	if (priv->init_status != AGNX_START)
-		goto out;
-
-	/* FiXME  Here has no lock, Is this will lead to race? */
-	irq_reason = ioread32(ctl + AGNX_CIR_BLKCTL);
-	if (!(irq_reason & 0x7))
-		goto out;
-
-	ret = IRQ_HANDLED;
-	priv->irq_status = ioread32(ctl + AGNX_INT_STAT);
-
-/*	printk(PFX "Interrupt reason is 0x%x\n", irq_reason); */
-	/* Make sure the txm and txd flags don't conflict with other unknown
-	   interrupt flag, maybe is not necessary */
-	irq_reason &= 0xF;
-
-	disable_rx_interrupt(priv);
-	/* TODO Make sure the card finished initialized */
-	agnx_interrupt_ack(priv, &irq_reason);
-
-	if (irq_reason & AGNX_STAT_RX)
-		handle_rx_irq(priv);
-	if (irq_reason & AGNX_STAT_TXD)
-		handle_txd_irq(priv);
-	if (irq_reason & AGNX_STAT_TXM)
-		handle_txm_irq(priv);
-	if (irq_reason & AGNX_STAT_X)
-		handle_other_irq(priv);
-
-	enable_rx_interrupt(priv);
-out:
-	spin_unlock(&priv->lock);
-	return ret;
-} /* agnx_interrupt_handler */
-
-
-/* FIXME */
-static int agnx_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
-	AGNX_TRACE;
-	return _agnx_tx(dev->priv, skb);
-} /* agnx_tx */
-
-
-static int agnx_get_mac_address(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	/* Attention! directly read the MAC or other date from EEPROM will
-	 lead to cardbus(WGM511) lock up when write to PM PLL register */
-	reg = agnx_read32(ctl, 0x3544);
-	udelay(40);
-	reg = agnx_read32(ctl, 0x354c);
-	udelay(50);
-	/* Get the mac address */
-	reg = agnx_read32(ctl, 0x3544);
-	udelay(40);
-
-	/* HACK */
-	reg = cpu_to_le32(reg);
-	priv->mac_addr[0] = ((u8 *)&reg)[2];
-	priv->mac_addr[1] = ((u8 *)&reg)[3];
-	reg = agnx_read32(ctl, 0x3548);
-	udelay(50);
-	*((u32 *)(priv->mac_addr + 2)) = cpu_to_le32(reg);
-
-	if (!is_valid_ether_addr(priv->mac_addr)) {
-		printk(KERN_WARNING PFX "read mac %pM\n", priv->mac_addr);
-		printk(KERN_WARNING PFX "Invalid hwaddr! Using random hwaddr\n");
-		random_ether_addr(priv->mac_addr);
-	}
-
-	return 0;
-} /* agnx_get_mac_address */
-
-static int agnx_alloc_rings(struct agnx_priv *priv)
-{
-	unsigned int len;
-	AGNX_TRACE;
-
-	/* Allocate RX/TXM/TXD rings info */
-	priv->rx.size = AGNX_RX_RING_SIZE;
-	priv->txm.size = AGNX_TXM_RING_SIZE;
-	priv->txd.size = AGNX_TXD_RING_SIZE;
-
-	len = priv->rx.size + priv->txm.size + priv->txd.size;
-
-/*	priv->rx.info = kzalloc(sizeof(struct agnx_info) * len, GFP_KERNEL); */
-	priv->rx.info = kzalloc(sizeof(struct agnx_info) * len, GFP_ATOMIC);
-	if (!priv->rx.info)
-		return -ENOMEM;
-	priv->txm.info = priv->rx.info + priv->rx.size;
-	priv->txd.info = priv->txm.info + priv->txm.size;
-
-	/* Allocate RX/TXM/TXD descriptors */
-	priv->rx.desc = pci_alloc_consistent(priv->pdev, sizeof(struct agnx_desc) * len,
-					     &priv->rx.dma);
-	if (!priv->rx.desc) {
-		kfree(priv->rx.info);
-		return -ENOMEM;
-	}
-
-	priv->txm.desc = priv->rx.desc + priv->rx.size;
-	priv->txm.dma = priv->rx.dma + sizeof(struct agnx_desc) * priv->rx.size;
-	priv->txd.desc = priv->txm.desc + priv->txm.size;
-	priv->txd.dma = priv->txm.dma + sizeof(struct agnx_desc) * priv->txm.size;
-
-	return 0;
-} /* agnx_alloc_rings */
-
-static void rings_free(struct agnx_priv *priv)
-{
-	unsigned int len = priv->rx.size + priv->txm.size + priv->txd.size;
-	unsigned long flags;
-	AGNX_TRACE;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	kfree(priv->rx.info);
-	pci_free_consistent(priv->pdev, sizeof(struct agnx_desc) * len,
-			    priv->rx.desc, priv->rx.dma);
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-#if 0
-static void agnx_periodic_work_handler(struct work_struct *work)
-{
-	struct agnx_priv *priv = container_of(work, struct agnx_priv, periodic_work.work);
-/*	unsigned long flags; */
-	unsigned long delay;
-
-	/* fixme: using mutex?? */
-/*	spin_lock_irqsave(&priv->lock, flags); */
-
-	/* TODO Recalibrate*/
-/*	calibrate_oscillator(priv); */
-/*	antenna_calibrate(priv); */
-/*	agnx_send_packet(priv, 997); */
-	/* FIXME */
-/* 	if (debug == 3) */
-/*                 delay = msecs_to_jiffies(AGNX_PERIODIC_DELAY); */
-/* 	else */
-	delay = msecs_to_jiffies(AGNX_PERIODIC_DELAY);
-/*	delay = round_jiffies(HZ * 15); */
-
-	queue_delayed_work(priv->hw->workqueue, &priv->periodic_work, delay);
-
-/*	spin_unlock_irqrestore(&priv->lock, flags); */
-}
-#endif
-
-static int agnx_start(struct ieee80211_hw *dev)
-{
-	struct agnx_priv *priv = dev->priv;
-	/* unsigned long delay; */
-	int err = 0;
-	AGNX_TRACE;
-
-	err = agnx_alloc_rings(priv);
-	if (err) {
-		printk(KERN_ERR PFX "Can't alloc RX/TXM/TXD rings\n");
-		goto out;
-	}
-	err = request_irq(priv->pdev->irq, &agnx_interrupt_handler,
-			  IRQF_SHARED, "agnx_pci", dev);
-	if (err) {
-		printk(KERN_ERR PFX "Failed to register IRQ handler\n");
-		rings_free(priv);
-		goto out;
-	}
-
-/*	mdelay(500); */
-
-	might_sleep();
-	agnx_hw_init(priv);
-
-/*	mdelay(500); */
-	might_sleep();
-
-	priv->init_status = AGNX_START;
-/*         INIT_DELAYED_WORK(&priv->periodic_work, agnx_periodic_work_handler); */
-/* 	delay = msecs_to_jiffies(AGNX_PERIODIC_DELAY); */
-/*         queue_delayed_work(priv->hw->workqueue, &priv->periodic_work, delay); */
-out:
-	return err;
-} /* agnx_start */
-
-static void agnx_stop(struct ieee80211_hw *dev)
-{
-	struct agnx_priv *priv = dev->priv;
-	AGNX_TRACE;
-
-	priv->init_status = AGNX_STOP;
-	/* make sure hardware will not generate irq */
-	agnx_hw_reset(priv);
-	free_irq(priv->pdev->irq, dev);
-/*	flush_workqueue(priv->hw->workqueue); */
-/*	cancel_delayed_work_sync(&priv->periodic_work); */
-	unfill_rings(priv);
-	rings_free(priv);
-}
-
-static int agnx_config(struct ieee80211_hw *dev, u32 changed)
-{
-	struct agnx_priv *priv = dev->priv;
-	struct ieee80211_conf *conf = &dev->conf;
-	int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
-	AGNX_TRACE;
-
-	spin_lock(&priv->lock);
-	/* FIXME need priv lock? */
-	if (channel != priv->channel) {
-		priv->channel = channel;
-		agnx_set_channel(priv, priv->channel);
-	}
-
-	spin_unlock(&priv->lock);
-	return 0;
-}
-
-static void agnx_bss_info_changed(struct ieee80211_hw *dev,
-				  struct ieee80211_vif *vif,
-				  struct ieee80211_bss_conf *conf,
-				  u32 changed)
-{
-	struct agnx_priv *priv = dev->priv;
-	void __iomem *ctl = priv->ctl;
-	AGNX_TRACE;
-
-	if (!(changed & BSS_CHANGED_BSSID))
-		return;
-
-	spin_lock(&priv->lock);
-
-	if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
-		agnx_set_bssid(priv, conf->bssid);
-		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
-		hash_write(priv, conf->bssid, BSSID_STAID);
-		sta_init(priv, BSSID_STAID);
-		/* FIXME needed? */
-		sta_power_init(priv, BSSID_STAID);
-		agnx_write32(ctl, AGNX_BM_MTSM, 0xff & ~0x1);
-	}
-	spin_unlock(&priv->lock);
-} /* agnx_bss_info_changed */
-
-
-static void agnx_configure_filter(struct ieee80211_hw *dev,
-				  unsigned int changed_flags,
-				  unsigned int *total_flags,
-				  int mc_count, struct dev_mc_list *mclist)
-{
-	unsigned int new_flags = 0;
-
-	*total_flags = new_flags;
-	/* TODO */
-}
-
-static int agnx_add_interface(struct ieee80211_hw *dev,
-			      struct ieee80211_if_init_conf *conf)
-{
-	struct agnx_priv *priv = dev->priv;
-	AGNX_TRACE;
-
-	spin_lock(&priv->lock);
-	/* FIXME */
-	if (priv->mode != NL80211_IFTYPE_MONITOR)
-		return -EOPNOTSUPP;
-
-	switch (conf->type) {
-	case NL80211_IFTYPE_STATION:
-		priv->mode = conf->type;
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	spin_unlock(&priv->lock);
-
-	return 0;
-}
-
-static void agnx_remove_interface(struct ieee80211_hw *dev,
-				  struct ieee80211_if_init_conf *conf)
-{
-	struct agnx_priv *priv = dev->priv;
-	AGNX_TRACE;
-
-	/* TODO */
-	priv->mode = NL80211_IFTYPE_MONITOR;
-}
-
-static int agnx_get_stats(struct ieee80211_hw *dev,
-			  struct ieee80211_low_level_stats *stats)
-{
-	struct agnx_priv *priv = dev->priv;
-	AGNX_TRACE;
-	spin_lock(&priv->lock);
-	/* TODO !! */
-	memcpy(stats, &priv->stats, sizeof(*stats));
-	spin_unlock(&priv->lock);
-
-	return 0;
-}
-
-static u64 agnx_get_tsft(struct ieee80211_hw *dev)
-{
-	void __iomem *ctl = ((struct agnx_priv *)dev->priv)->ctl;
-	u32 tsftl;
-	u64 tsft;
-	AGNX_TRACE;
-
-	/* FIXME */
-	tsftl = ioread32(ctl + AGNX_TXM_TIMESTAMPLO);
-	tsft = ioread32(ctl + AGNX_TXM_TIMESTAMPHI);
-	tsft <<= 32;
-	tsft |= tsftl;
-
-	return tsft;
-}
-
-static int agnx_get_tx_stats(struct ieee80211_hw *dev,
-			     struct ieee80211_tx_queue_stats *stats)
-{
-	struct agnx_priv *priv = dev->priv;
-	AGNX_TRACE;
-
-	/* FIXME now we just using txd queue, but should using txm queue too */
-	stats[0].len = (priv->txd.idx - priv->txd.idx_sent) / 2;
-	stats[0].limit = priv->txd.size - 2;
-	stats[0].count = priv->txd.idx / 2;
-
-	return 0;
-}
-
-static struct ieee80211_ops agnx_ops = {
-	.tx			= agnx_tx,
-	.start			= agnx_start,
-	.stop			= agnx_stop,
-	.add_interface		= agnx_add_interface,
-	.remove_interface	= agnx_remove_interface,
-	.config			= agnx_config,
-	.bss_info_changed	= agnx_bss_info_changed,
-	.configure_filter	= agnx_configure_filter,
-	.get_stats		= agnx_get_stats,
-	.get_tx_stats		= agnx_get_tx_stats,
-	.get_tsf		= agnx_get_tsft
-};
-
-static void __devexit agnx_pci_remove(struct pci_dev *pdev)
-{
-	struct ieee80211_hw *dev = pci_get_drvdata(pdev);
-	struct agnx_priv *priv;
-	AGNX_TRACE;
-
-	if (!dev)
-		return;
-	priv = dev->priv;
-	ieee80211_unregister_hw(dev);
-	pci_iounmap(pdev, priv->ctl);
-	pci_iounmap(pdev, priv->data);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-
-	ieee80211_free_hw(dev);
-}
-
-static int __devinit agnx_pci_probe(struct pci_dev *pdev,
-				    const struct pci_device_id *id)
-{
-	struct ieee80211_hw *dev;
-	struct agnx_priv *priv;
-	int err;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "can't enable pci device\n");
-		return err;
-	}
-
-	err = pci_request_regions(pdev, "agnx-pci");
-	if (err) {
-		dev_err(&pdev->dev, "can't reserve PCI resources\n");
-		return err;
-	}
-
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
-	    pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		dev_err(&pdev->dev, "no suitable DMA available\n");
-		err = -EIO;
-		goto err_free_reg;
-	}
-
-	pci_set_master(pdev);
-
-	dev = ieee80211_alloc_hw(sizeof(*priv), &agnx_ops);
-	if (!dev) {
-		dev_err(&pdev->dev, "ieee80211 alloc failed\n");
-		err = -ENOMEM;
-		goto err_free_reg;
-	}
-	priv = dev->priv;
-	memset(priv, 0, sizeof(*priv));
-	priv->mode = NL80211_IFTYPE_MONITOR;
-	priv->pdev = pdev;
-	priv->hw = dev;
-	spin_lock_init(&priv->lock);
-	priv->init_status = AGNX_UNINIT;
-
-	priv->ctl = pci_iomap(pdev, 0, 0);
-/*	dev_dbg(&pdev->dev, "MEM1 mapped address is 0x%p\n", priv->ctl); */
-	if (!priv->ctl) {
-		dev_err(&pdev->dev, "can't map device memory\n");
-		err = -ENOMEM;
-		goto err_free_dev;
-	}
-	priv->data = pci_iomap(pdev, 1, 0);
-	if (!priv->data) {
-		dev_err(&pdev->dev, "can't map device memory\n");
-		err = -ENOMEM;
-		goto err_iounmap2;
-	}
-
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &priv->revid);
-
-	priv->band.channels   = (struct ieee80211_channel *)agnx_channels;
-	priv->band.n_channels = ARRAY_SIZE(agnx_channels);
-	priv->band.bitrates   = (struct ieee80211_rate *)agnx_rates_80211g;
-	priv->band.n_bitrates = ARRAY_SIZE(agnx_rates_80211g);
-
-	/* Init ieee802.11 dev  */
-	SET_IEEE80211_DEV(dev, &pdev->dev);
-	pci_set_drvdata(pdev, dev);
-	dev->extra_tx_headroom = sizeof(struct agnx_hdr);
-
-	/* FIXME It only include FCS in promious mode but not manage mode */
-/*      dev->flags =  IEEE80211_HW_RX_INCLUDES_FCS; */
-	dev->channel_change_time = 5000;
-	dev->max_signal = 100;
-	/* FIXME */
-	dev->queues = 1;
-
-	agnx_get_mac_address(priv);
-
-	SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr);
-
-/* 	/\* FIXME *\/ */
-/* 	for (i = 1; i < NUM_DRIVE_MODES; i++) { */
-/* 		err = ieee80211_register_hwmode(dev, &priv->modes[i]); */
-/* 		if (err) { */
-/* 			printk(KERN_ERR PFX "Can't register hwmode\n"); */
-/* 			goto  err_iounmap; */
-/* 		} */
-/* 	} */
-
-	priv->channel = 1;
-	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
-
-	err = ieee80211_register_hw(dev);
-	if (err) {
-		dev_err(&pdev->dev, "can't register hardware\n");
-		goto err_iounmap;
-	}
-
-	agnx_hw_reset(priv);
-
-	dev_info(&pdev->dev, "%s: hwaddr %pM, Rev 0x%02x\n",
-		wiphy_name(dev->wiphy),
-		dev->wiphy->perm_addr, priv->revid);
-	return 0;
-
- err_iounmap:
-	pci_iounmap(pdev, priv->data);
-
- err_iounmap2:
-	pci_iounmap(pdev, priv->ctl);
-
- err_free_dev:
-	pci_set_drvdata(pdev, NULL);
-	ieee80211_free_hw(dev);
-
- err_free_reg:
-	pci_release_regions(pdev);
-
-	pci_disable_device(pdev);
-	return err;
-} /* agnx_pci_probe*/
-
-#ifdef CONFIG_PM
-
-static int agnx_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct ieee80211_hw *dev = pci_get_drvdata(pdev);
-	AGNX_TRACE;
-
-	ieee80211_stop_queues(dev);
-	agnx_stop(dev);
-
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-	return 0;
-}
-
-static int agnx_pci_resume(struct pci_dev *pdev)
-{
-	struct ieee80211_hw *dev = pci_get_drvdata(pdev);
-	AGNX_TRACE;
-
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-
-	agnx_start(dev);
-	ieee80211_wake_queues(dev);
-
-	return 0;
-}
-
-#else
-
-#define agnx_pci_suspend NULL
-#define agnx_pci_resume NULL
-
-#endif /* CONFIG_PM */
-
-
-static struct pci_driver agnx_pci_driver = {
-	.name		= "agnx-pci",
-	.id_table	= agnx_pci_id_tbl,
-	.probe		= agnx_pci_probe,
-	.remove		= __devexit_p(agnx_pci_remove),
-	.suspend	= agnx_pci_suspend,
-	.resume		= agnx_pci_resume,
-};
-
-static int __init agnx_pci_init(void)
-{
-	AGNX_TRACE;
-	return pci_register_driver(&agnx_pci_driver);
-}
-
-static void __exit agnx_pci_exit(void)
-{
-	AGNX_TRACE;
-	pci_unregister_driver(&agnx_pci_driver);
-}
-
-
-module_init(agnx_pci_init);
-module_exit(agnx_pci_exit);
diff --git a/drivers/staging/agnx/phy.c b/drivers/staging/agnx/phy.c
deleted file mode 100644
index ec1ca86fa0c4..000000000000
--- a/drivers/staging/agnx/phy.c
+++ /dev/null
@@ -1,960 +0,0 @@
-/**
- * Airgo MIMO wireless driver
- *
- * Copyright (c) 2007 Li YanBo <dreamfly281@gmail.com>
-
- * Thanks for Jeff Williams <angelbane@gmail.com> do reverse engineer
- * works and published the SPECS at http://airgo.wdwconsulting.net/mymoin
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/etherdevice.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include "agnx.h"
-#include "debug.h"
-#include "phy.h"
-#include "table.h"
-#include "sta.h"
-#include "xmit.h"
-
-u8 read_from_eeprom(struct agnx_priv *priv, u16 address)
-{
-	void __iomem *ctl = priv->ctl;
-	struct agnx_eeprom cmd;
-	u32 reg;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.cmd = EEPROM_CMD_READ << AGNX_EEPROM_COMMAND_SHIFT;
-	cmd.address = address;
-	/* Verify that the Status bit is clear */
-	/* Read Command and Address are written to the Serial Interface */
-	iowrite32(*(__le32 *)&cmd, ctl + AGNX_CIR_SERIALITF);
-	/* Wait for the Status bit to clear again */
-	eeprom_delay();
-	/* Read from Data */
-	reg = ioread32(ctl + AGNX_CIR_SERIALITF);
-
-	cmd = *(struct agnx_eeprom *)&reg;
-
-	return cmd.data;
-}
-
-static int card_full_reset(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	reg = agnx_read32(ctl, AGNX_CIR_BLKCTL);
-	agnx_write32(ctl, AGNX_CIR_BLKCTL, 0x80);
-	reg = agnx_read32(ctl, AGNX_CIR_BLKCTL);
-	return 0;
-}
-
-inline void enable_power_saving(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-
-	reg = agnx_read32(ctl, AGNX_PM_PMCTL);
-	reg &= ~0x8;
-	agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-}
-
-inline void disable_power_saving(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-
-	reg = agnx_read32(ctl, AGNX_PM_PMCTL);
-	reg |= 0x8;
-	agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-}
-
-
-void disable_receiver(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	AGNX_TRACE;
-
-	/* FIXME Disable the receiver */
-	agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x0);
-	/* Set gain control reset */
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
-	/* Reset gain control reset */
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-}
-
-
-/* Fixme this shoule be disable RX, above is enable RX */
-void enable_receiver(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	AGNX_TRACE;
-
-	/* Set adaptive gain control discovery mode */
-	agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
-	/* Set gain control reset */
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
-	/* Clear gain control reset */
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-}
-
-static void mac_address_set(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u8 *mac_addr = priv->mac_addr;
-	u32 reg;
-
-	/* FIXME */
-	reg = (mac_addr[0] << 24) | (mac_addr[1] << 16) | mac_addr[2] << 8 | mac_addr[3];
-	iowrite32(reg, ctl + AGNX_RXM_MACHI);
-	reg = (mac_addr[4] << 8) | mac_addr[5];
-	iowrite32(reg, ctl + AGNX_RXM_MACLO);
-}
-
-static void receiver_bssid_set(struct agnx_priv *priv, const u8 *bssid)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-
-	disable_receiver(priv);
-	/* FIXME */
-	reg = bssid[0] << 24 | (bssid[1] << 16) | (bssid[2] << 8) | bssid[3];
-	iowrite32(reg, ctl + AGNX_RXM_BSSIDHI);
-	reg = (bssid[4] << 8) | bssid[5];
-	iowrite32(reg, ctl + AGNX_RXM_BSSIDLO);
-
-	/* Enable the receiver */
-	enable_receiver(priv);
-
-	/* Clear the TSF */
-/* 	agnx_write32(ctl, AGNX_TXM_TSFLO, 0x0); */
-/* 	agnx_write32(ctl, AGNX_TXM_TSFHI, 0x0); */
-	/* Clear the TBTT */
-	agnx_write32(ctl, AGNX_TXM_TBTTLO, 0x0);
-	agnx_write32(ctl, AGNX_TXM_TBTTHI, 0x0);
-	disable_receiver(priv);
-} /* receiver_bssid_set */
-
-static void band_management_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	void __iomem *data = priv->data;
-	u32 reg;
-	int i;
-	AGNX_TRACE;
-
-	agnx_write32(ctl, AGNX_BM_TXWADDR, AGNX_PDU_TX_WQ);
-	agnx_write32(ctl, AGNX_CIR_ADDRWIN, 0x0);
-	memset_io(data + AGNX_PDUPOOL, 0x0, AGNX_PDUPOOL_SIZE);
-	agnx_write32(ctl, AGNX_BM_BMCTL, 0x200);
-
-	agnx_write32(ctl, AGNX_BM_CIPDUWCNT, 0x40);
-	agnx_write32(ctl, AGNX_BM_SPPDUWCNT, 0x2);
-	agnx_write32(ctl, AGNX_BM_RFPPDUWCNT, 0x0);
-	agnx_write32(ctl, AGNX_BM_RHPPDUWCNT, 0x22);
-
-	/* FIXME Initialize the Free Pool Linked List */
-	/*    1. Write the Address of the Next Node ((0x41800 + node*size)/size)
-	      to the first word of each node.  */
-	for (i = 0; i < PDU_FREE_CNT; i++) {
-		iowrite32((AGNX_PDU_FREE + (i+1)*PDU_SIZE)/PDU_SIZE,
-			  data + AGNX_PDU_FREE + (PDU_SIZE * i));
-		/* The last node should be set to 0x0 */
-		if ((i + 1) == PDU_FREE_CNT)
-			memset_io(data + AGNX_PDU_FREE + (PDU_SIZE * i),
-				  0x0, PDU_SIZE);
-	}
-
-	/* Head is First Pool address (0x41800) / size (0x80) */
-	agnx_write32(ctl, AGNX_BM_FPLHP, AGNX_PDU_FREE/PDU_SIZE);
-	/* Tail is Last Pool Address (0x47f80) / size (0x80) */
-	agnx_write32(ctl, AGNX_BM_FPLTP, 0x47f80/PDU_SIZE);
-	/* Count is Number of Nodes in the Pool (0xd0) */
-	agnx_write32(ctl, AGNX_BM_FPCNT, PDU_FREE_CNT);
-
-	/* Start all workqueue */
-	agnx_write32(ctl, AGNX_BM_CIWQCTL, 0x80000);
-	agnx_write32(ctl, AGNX_BM_CPULWCTL, 0x80000);
-	agnx_write32(ctl, AGNX_BM_CPUHWCTL, 0x80000);
-	agnx_write32(ctl, AGNX_BM_CPUTXWCTL, 0x80000);
-	agnx_write32(ctl, AGNX_BM_CPURXWCTL, 0x80000);
-	agnx_write32(ctl, AGNX_BM_SPRXWCTL, 0x80000);
-	agnx_write32(ctl, AGNX_BM_SPTXWCTL, 0x80000);
-	agnx_write32(ctl, AGNX_BM_RFPWCTL, 0x80000);
-
-	/* Enable the Band Management */
-	reg = agnx_read32(ctl, AGNX_BM_BMCTL);
-	reg |= 0x1;
-	agnx_write32(ctl, AGNX_BM_BMCTL, reg);
-} /* band_managment_init */
-
-
-static void system_itf_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	agnx_write32(ctl, AGNX_SYSITF_GPIOUT, 0x0);
-	agnx_write32(ctl, AGNX_PM_TESTPHY, 0x11e143a);
-
-	if (priv->revid == 0) {
-		reg = agnx_read32(ctl, AGNX_SYSITF_SYSMODE);
-		reg |= 0x11;
-		agnx_write32(ctl, AGNX_SYSITF_SYSMODE, reg);
-	}
-	/* ??? What is that means? it should difference for differice type
-	 of cards */
-	agnx_write32(ctl, AGNX_CIR_SERIALITF, 0xfff81006);
-
-	agnx_write32(ctl, AGNX_SYSITF_GPIOIN, 0x1f0000);
-	agnx_write32(ctl, AGNX_SYSITF_GPIOUT, 0x5);
-	reg = agnx_read32(ctl, AGNX_SYSITF_GPIOIN);
-}
-
-static void encryption_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	AGNX_TRACE;
-
-	agnx_write32(ctl, AGNX_ENCRY_WEPKEY0, 0x0);
-	agnx_write32(ctl, AGNX_ENCRY_WEPKEY1, 0x0);
-	agnx_write32(ctl, AGNX_ENCRY_WEPKEY2, 0x0);
-	agnx_write32(ctl, AGNX_ENCRY_WEPKEY3, 0x0);
-	agnx_write32(ctl, AGNX_ENCRY_CCMRECTL, 0x8);
-}
-
-static void tx_management_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	void __iomem *data = priv->data;
-	u32 reg;
-	AGNX_TRACE;
-
-	/* Fill out the ComputationalEngineLookupTable
-	 * starting at memory #2 offset 0x800
-	 */
-	tx_engine_lookup_tbl_init(priv);
-	memset_io(data + 0x1000, 0, 0xfe0);
-	/* Enable Transmission Management Functions */
-	agnx_write32(ctl, AGNX_TXM_ETMF, 0x3ff);
-	/* Write 0x3f to Transmission Template */
-	agnx_write32(ctl, AGNX_TXM_TXTEMP, 0x3f);
-
-	if (priv->revid >= 2)
-		agnx_write32(ctl, AGNX_TXM_SIFSPIFS, 0x1e140a0b);
-	else
-		agnx_write32(ctl, AGNX_TXM_SIFSPIFS, 0x1e190a0b);
-
-	reg = agnx_read32(ctl, AGNX_TXM_TIFSEIFS);
-	reg &= 0xff00;
-	reg |= 0xb;
-	agnx_write32(ctl, AGNX_TXM_TIFSEIFS, reg);
-	reg = agnx_read32(ctl, AGNX_TXM_TIFSEIFS);
-	reg &= 0xffff00ff;
-	reg |= 0xa00;
-	agnx_write32(ctl, AGNX_TXM_TIFSEIFS, reg);
-	/* Enable TIFS */
-	agnx_write32(ctl, AGNX_TXM_CTL, 0x40000);
-
-	reg = agnx_read32(ctl, AGNX_TXM_TIFSEIFS);
-	reg &= 0xff00ffff;
-	reg |= 0x510000;
-	agnx_write32(ctl, AGNX_TXM_TIFSEIFS, reg);
-	reg = agnx_read32(ctl, AGNX_TXM_PROBDELAY);
-	reg &= 0xff00ffff;
-	agnx_write32(ctl, AGNX_TXM_PROBDELAY, reg);
-	reg = agnx_read32(ctl, AGNX_TXM_TIFSEIFS);
-	reg &= 0x00ffffff;
-	reg |= 0x1c000000;
-	agnx_write32(ctl, AGNX_TXM_TIFSEIFS, reg);
-	reg = agnx_read32(ctl, AGNX_TXM_PROBDELAY);
-	reg &= 0x00ffffff;
-	reg |= 0x01000000;
-	agnx_write32(ctl, AGNX_TXM_PROBDELAY, reg);
-
-	/* # Set DIF 0-1,2-3,4-5,6-7 to defaults */
-	agnx_write32(ctl, AGNX_TXM_DIF01, 0x321d321d);
-	agnx_write32(ctl, AGNX_TXM_DIF23, 0x321d321d);
-	agnx_write32(ctl, AGNX_TXM_DIF45, 0x321d321d);
-	agnx_write32(ctl, AGNX_TXM_DIF67, 0x321d321d);
-
-	/* Max Ack timeout limit */
-	agnx_write32(ctl, AGNX_TXM_MAXACKTIM, 0x1e19);
-	/* Max RX Data Timeout count, */
-	reg = agnx_read32(ctl, AGNX_TXM_MAXRXTIME);
-	reg &= 0xffff0000;
-	reg |= 0xff;
-	agnx_write32(ctl, AGNX_TXM_MAXRXTIME, reg);
-
-	/* CF poll RX Timeout count */
-	reg = agnx_read32(ctl, AGNX_TXM_CFPOLLRXTIM);
-	reg &= 0xffff;
-	reg |= 0xff0000;
-	agnx_write32(ctl, AGNX_TXM_CFPOLLRXTIM, reg);
-
-	/* Max Timeout Exceeded count, */
-	reg = agnx_read32(ctl, AGNX_TXM_MAXTIMOUT);
-	reg &= 0xff00ffff;
-	reg |= 0x190000;
-	agnx_write32(ctl, AGNX_TXM_MAXTIMOUT, reg);
-
-	/* CF ack timeout limit for 11b */
-	reg = agnx_read32(ctl, AGNX_TXM_CFACKT11B);
-	reg &= 0xff00;
-	reg |= 0x1e;
-	agnx_write32(ctl, AGNX_TXM_CFACKT11B, reg);
-
-	/* Max CF Poll Timeout Count */
-	reg = agnx_read32(ctl, AGNX_TXM_CFPOLLRXTIM);
-	reg &= 0xffff0000;
-	reg |= 0x19;
-	agnx_write32(ctl, AGNX_TXM_CFPOLLRXTIM, reg);
-	/* CF Poll RX Timeout Count */
-	reg = agnx_read32(ctl, AGNX_TXM_CFPOLLRXTIM);
-	reg &= 0xffff0000;
-	reg |= 0x1e;
-	agnx_write32(ctl, AGNX_TXM_CFPOLLRXTIM, reg);
-
-	/* # write default to */
-	/*    1. Schedule Empty Count */
-	agnx_write32(ctl, AGNX_TXM_SCHEMPCNT, 0x5);
-	/*    2. CFP Period Count */
-	agnx_write32(ctl, AGNX_TXM_CFPERCNT, 0x1);
-	/*    3. CFP MDV  */
-	agnx_write32(ctl, AGNX_TXM_CFPMDV, 0x10000);
-
-	/* Probe Delay */
-	reg = agnx_read32(ctl, AGNX_TXM_PROBDELAY);
-	reg &= 0xffff0000;
-	reg |= 0x400;
-	agnx_write32(ctl, AGNX_TXM_PROBDELAY, reg);
-
-	/* Max CCA count Slot */
-	reg = agnx_read32(ctl, AGNX_TXM_MAXCCACNTSLOT);
-	reg &= 0xffff00ff;
-	reg |= 0x900;
-	agnx_write32(ctl, AGNX_TXM_MAXCCACNTSLOT, reg);
-
-	/* Slot limit/1 msec Limit */
-	reg = agnx_read32(ctl, AGNX_TXM_SLOTLIMIT);
-	reg &= 0xff00ffff;
-	reg |= 0x140077;
-	agnx_write32(ctl, AGNX_TXM_SLOTLIMIT, reg);
-
-	/* # Set CW #(0-7) to default */
-	agnx_write32(ctl, AGNX_TXM_CW0, 0xff0007);
-	agnx_write32(ctl, AGNX_TXM_CW1, 0xff0007);
-	agnx_write32(ctl, AGNX_TXM_CW2, 0xff0007);
-	agnx_write32(ctl, AGNX_TXM_CW3, 0xff0007);
-	agnx_write32(ctl, AGNX_TXM_CW4, 0xff0007);
-	agnx_write32(ctl, AGNX_TXM_CW5, 0xff0007);
-	agnx_write32(ctl, AGNX_TXM_CW6, 0xff0007);
-	agnx_write32(ctl, AGNX_TXM_CW7, 0xff0007);
-
-	/* # Set Short/Long limit #(0-7) to default */
-	agnx_write32(ctl, AGNX_TXM_SLBEALIM0,  0xa000a);
-	agnx_write32(ctl, AGNX_TXM_SLBEALIM1,  0xa000a);
-	agnx_write32(ctl, AGNX_TXM_SLBEALIM2,  0xa000a);
-	agnx_write32(ctl, AGNX_TXM_SLBEALIM3,  0xa000a);
-	agnx_write32(ctl, AGNX_TXM_SLBEALIM4,  0xa000a);
-	agnx_write32(ctl, AGNX_TXM_SLBEALIM5,  0xa000a);
-	agnx_write32(ctl, AGNX_TXM_SLBEALIM6,  0xa000a);
-	agnx_write32(ctl, AGNX_TXM_SLBEALIM7,  0xa000a);
-
-	reg = agnx_read32(ctl, AGNX_TXM_CTL);
-	reg |= 0x1400;
-	agnx_write32(ctl, AGNX_TXM_CTL, reg);
-	/* Wait for bit 0 in Control Reg to clear  */
-	udelay(80);
-	reg = agnx_read32(ctl, AGNX_TXM_CTL);
-	/* Or 0x18000 to Control reg */
-	reg = agnx_read32(ctl, AGNX_TXM_CTL);
-	reg |= 0x18000;
-	agnx_write32(ctl, AGNX_TXM_CTL, reg);
-	/* Wait for bit 0 in Control Reg to clear */
-	udelay(80);
-	reg = agnx_read32(ctl, AGNX_TXM_CTL);
-
-	/* Set Listen Interval Count to default */
-	agnx_write32(ctl, AGNX_TXM_LISINTERCNT, 0x1);
-	/* Set DTIM period count to default */
-	agnx_write32(ctl, AGNX_TXM_DTIMPERICNT, 0x2000);
-} /* tx_management_init */
-
-static void rx_management_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	AGNX_TRACE;
-
-	/* Initialize the Routing Table */
-	routing_table_init(priv);
-
-	if (priv->revid >= 3) {
-		agnx_write32(ctl, 0x2074, 0x1f171710);
-		agnx_write32(ctl, 0x2078, 0x10100d0d);
-		agnx_write32(ctl, 0x207c, 0x11111010);
-	} else {
-		agnx_write32(ctl, AGNX_RXM_DELAY11, 0x0);
-	}
-	agnx_write32(ctl, AGNX_RXM_REQRATE, 0x8195e00);
-}
-
-
-static void agnx_timer_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	AGNX_TRACE;
-
-/* 	/\* Write 0x249f00 (tick duration?) to Timer 1 *\/ */
-/* 	agnx_write32(ctl, AGNX_TIMCTL_TIMER1, 0x249f00); */
-/* 	/\* Write 0xe2 to Timer 1 Control *\/ */
-/* 	agnx_write32(ctl, AGNX_TIMCTL_TIM1CTL, 0xe2); */
-
-	/* Write 0x249f00 (tick duration?) to Timer 1 */
-	agnx_write32(ctl, AGNX_TIMCTL_TIMER1, 0x0);
-	/* Write 0xe2 to Timer 1 Control */
-	agnx_write32(ctl, AGNX_TIMCTL_TIM1CTL, 0x0);
-
-	iowrite32(0xFFFFFFFF, priv->ctl + AGNX_TXM_BEACON_CTL);
-}
-
-static void power_manage_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	agnx_write32(ctl, AGNX_PM_MACMSW, 0x1f);
-	agnx_write32(ctl, AGNX_PM_RFCTL, 0x1f);
-
-	reg = agnx_read32(ctl, AGNX_PM_PMCTL);
-	reg &= 0xf00f;
-	reg |= 0xa0;
-	agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
-	if (priv->revid >= 3) {
-		reg = agnx_read32(ctl, AGNX_PM_SOFTRST);
-		reg |= 0x18;
-		agnx_write32(ctl, AGNX_PM_SOFTRST, reg);
-	}
-} /* power_manage_init */
-
-
-static void gain_ctlcnt_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	agnx_write32(ctl, AGNX_GCR_TRACNT5, 0x119);
-	agnx_write32(ctl, AGNX_GCR_TRACNT6, 0x118);
-	agnx_write32(ctl, AGNX_GCR_TRACNT7, 0x117);
-
-	reg = agnx_read32(ctl, AGNX_PM_PMCTL);
-	reg |= 0x8;
-	agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
-	reg = agnx_read32(ctl, AGNX_PM_PMCTL);
-	reg &= ~0x8;
-	agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
-	agnx_write32(ctl, AGNX_CIR_ADDRWIN, 0x0);
-
-	/* FIXME Write the initial Station Descriptor for the card */
-	sta_init(priv, LOCAL_STAID);
-	sta_init(priv, BSSID_STAID);
-
-	/* Enable staion 0 and 1 can do TX */
-	/* It seemed if we set other bit to 1 the bit 0 will
-	   be auto change to 0 */
-	agnx_write32(ctl, AGNX_BM_TXTOPEER, 0x2 | 0x1);
-/*	agnx_write32(ctl, AGNX_BM_TXTOPEER, 0x1); */
-} /* gain_ctlcnt_init */
-
-
-static void phy_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	void __iomem *data = priv->data;
-	u32 reg;
-	AGNX_TRACE;
-
-	/* Load InitialGainTable */
-	gain_table_init(priv);
-
-	agnx_write32(ctl, AGNX_CIR_ADDRWIN, 0x2000000);
-
-	/* Clear the following offsets in Memory Range #2: */
-	memset_io(data + 0x5040, 0, 0xa * 4);
-	memset_io(data + 0x5080, 0, 0xa * 4);
-	memset_io(data + 0x50c0, 0, 0xa * 4);
-	memset_io(data + 0x5400, 0, 0x80 * 4);
-	memset_io(data + 0x6000, 0, 0x280 * 4);
-	memset_io(data + 0x7000, 0, 0x280 * 4);
-	memset_io(data + 0x8000, 0, 0x280 * 4);
-
-	/* Initialize the Following Registers According to PCI Revision ID */
-	if (priv->revid == 0) {
-		/* fixme the part hasn't been update but below has been update
-		   based on WGM511 */
-		agnx_write32(ctl, AGNX_ACI_LEN, 0xf);
-		agnx_write32(ctl, AGNX_ACI_TIMER1, 0x1d);
-		agnx_write32(ctl, AGNX_ACI_TIMER2, 0x3);
-		agnx_write32(ctl, AGNX_ACI_AICCHA0OVE, 0x11);
-		agnx_write32(ctl, AGNX_ACI_AICCHA1OVE, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THD0A, 0x64);
-		agnx_write32(ctl, AGNX_GCR_THD0AL, 0x4b);
-		agnx_write32(ctl, AGNX_GCR_THD0B, 0x4b);
-		agnx_write32(ctl, AGNX_GCR_DUNSAT, 0x14);
-		agnx_write32(ctl, AGNX_GCR_DSAT, 0x24);
-		agnx_write32(ctl, AGNX_GCR_DFIRCAL, 0x8);
-		agnx_write32(ctl, AGNX_GCR_DGCTL11A, 0x1a);
-		agnx_write32(ctl, AGNX_GCR_DGCTL11B, 0x3);
-		agnx_write32(ctl, AGNX_GCR_GAININIT, 0xd);
-		agnx_write32(ctl, AGNX_GCR_THNOSIG, 0x1);
-		agnx_write32(ctl, AGNX_GCR_COARSTEP, 0x7);
-		agnx_write32(ctl, AGNX_GCR_SIFST11A, 0x28);
-		agnx_write32(ctl, AGNX_GCR_SIFST11B, 0x28);
-		reg = agnx_read32(ctl, AGNX_GCR_CWDETEC);
-		reg |= 0x1;
-		agnx_write32(ctl, AGNX_GCR_CWDETEC, reg);
-		agnx_write32(ctl, AGNX_GCR_0X38, 0x1e);
-		agnx_write32(ctl, AGNX_GCR_BOACT, 0x26);
-		agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
-		agnx_write32(ctl, AGNX_GCR_NLISTANT, 0x3);
-		agnx_write32(ctl, AGNX_GCR_NACTIANT, 0x3);
-		agnx_write32(ctl, AGNX_GCR_NMEASANT, 0x3);
-		agnx_write32(ctl, AGNX_GCR_NCAPTANT, 0x3);
-		agnx_write32(ctl, AGNX_GCR_THCAP11A, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THCAP11B, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THCAPRX11A, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THCAPRX11B, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THLEVDRO, 0x10);
-		agnx_write32(ctl, AGNX_GCR_MAXRXTIME11A, 0x1);
-		agnx_write32(ctl, AGNX_GCR_MAXRXTIME11B, 0x1);
-		agnx_write32(ctl, AGNX_GCR_CORRTIME, 0x190);
-		agnx_write32(ctl, AGNX_GCR_SIGHTH, 0x78);
-		agnx_write32(ctl, AGNX_GCR_SIGLTH, 0x1c);
-		agnx_write32(ctl, AGNX_GCR_CORRDROP, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THCD, 0x0);
-		agnx_write32(ctl, AGNX_GCR_MAXPOWDIFF, 0x1);
-		agnx_write32(ctl, AGNX_GCR_TESTBUS, 0x0);
-		agnx_write32(ctl, AGNX_GCR_ANTCFG, 0x1f);
-		agnx_write32(ctl, AGNX_GCR_THJUMP, 0x14);
-		agnx_write32(ctl, AGNX_GCR_THPOWER, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THPOWCLIP, 0x30);
-		agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 0x32);
-		agnx_write32(ctl, AGNX_GCR_THRX11BPOWMIN, 0x19);
-		agnx_write32(ctl, AGNX_GCR_0X14c, 0x0);
-		agnx_write32(ctl, AGNX_GCR_0X150, 0x0);
-		agnx_write32(ctl, 0x9400, 0x0);
-		agnx_write32(ctl, 0x940c, 0x6ff);
-		agnx_write32(ctl, 0x9428, 0xa0);
-		agnx_write32(ctl, 0x9434, 0x0);
-		agnx_write32(ctl, 0x9c04, 0x15);
-		agnx_write32(ctl, 0x9c0c, 0x7f);
-		agnx_write32(ctl, 0x9c34, 0x0);
-		agnx_write32(ctl, 0xc000, 0x38d);
-		agnx_write32(ctl, 0x14018, 0x0);
-		agnx_write32(ctl, 0x16000, 0x1);
-		agnx_write32(ctl, 0x11004, 0x0);
-		agnx_write32(ctl, 0xec54, 0xa);
-		agnx_write32(ctl, 0xec1c, 0x5);
-	} else if (priv->revid > 0) {
-		agnx_write32(ctl, AGNX_ACI_LEN, 0xf);
-		agnx_write32(ctl, AGNX_ACI_TIMER1, 0x21);
-		agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
-		agnx_write32(ctl, AGNX_ACI_AICCHA0OVE, 0x11);
-		agnx_write32(ctl, AGNX_ACI_AICCHA1OVE, 0x0);
-		agnx_write32(ctl, AGNX_GCR_DUNSAT, 0x14);
-		agnx_write32(ctl, AGNX_GCR_DSAT, 0x24);
-		agnx_write32(ctl, AGNX_GCR_DFIRCAL, 0x8);
-		agnx_write32(ctl, AGNX_GCR_DGCTL11A, 0x1a);
-		agnx_write32(ctl, AGNX_GCR_DGCTL11B, 0x3);
-		agnx_write32(ctl, AGNX_GCR_GAININIT, 0xd);
-		agnx_write32(ctl, AGNX_GCR_THNOSIG, 0x1);
-		agnx_write32(ctl, AGNX_GCR_COARSTEP, 0x7);
-		agnx_write32(ctl, AGNX_GCR_SIFST11A, 0x28);
-		agnx_write32(ctl, AGNX_GCR_SIFST11B, 0x28);
-		agnx_write32(ctl, AGNX_GCR_CWDETEC, 0x0);
-		agnx_write32(ctl, AGNX_GCR_0X38, 0x1e);
-/*		agnx_write32(ctl, AGNX_GCR_BOACT, 0x26);*/
-		agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
-
-		agnx_write32(ctl, AGNX_GCR_THCAP11A, 0x32);
-		agnx_write32(ctl, AGNX_GCR_THCAP11B, 0x32);
-		agnx_write32(ctl, AGNX_GCR_THCAPRX11A, 0x32);
-		agnx_write32(ctl, AGNX_GCR_THCAPRX11B, 0x32);
-		agnx_write32(ctl, AGNX_GCR_THLEVDRO, 0x10);
-		agnx_write32(ctl, AGNX_GCR_MAXRXTIME11A, 0x1ad);
-		agnx_write32(ctl, AGNX_GCR_MAXRXTIME11B, 0xa10);
-		agnx_write32(ctl, AGNX_GCR_CORRTIME, 0x190);
-		agnx_write32(ctl, AGNX_GCR_CORRDROP, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THCD, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THCS, 0x0);
-		agnx_write32(ctl, AGNX_GCR_MAXPOWDIFF, 0x4);
-		agnx_write32(ctl, AGNX_GCR_TESTBUS, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THJUMP, 0x1e);
-		agnx_write32(ctl, AGNX_GCR_THPOWER, 0x0);
-		agnx_write32(ctl, AGNX_GCR_THPOWCLIP, 0x2a);
-		agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 0x3c);
-		agnx_write32(ctl, AGNX_GCR_THRX11BPOWMIN, 0x19);
-		agnx_write32(ctl, AGNX_GCR_0X14c, 0x0);
-		agnx_write32(ctl, AGNX_GCR_0X150, 0x0);
-		agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-		agnx_write32(ctl, AGNX_GCR_WATCHDOG, 0x37);
-		agnx_write32(ctl, 0x9400, 0x0);
-		agnx_write32(ctl, 0x940c, 0x6ff);
-		agnx_write32(ctl, 0x9428, 0xa0);
-		agnx_write32(ctl, 0x9434, 0x0);
-		agnx_write32(ctl, 0x9c04, 0x15);
-		agnx_write32(ctl, 0x9c0c, 0x7f);
-		agnx_write32(ctl, 0x9c34, 0x0);
-		agnx_write32(ctl, 0xc000, 0x38d);
-		agnx_write32(ctl, 0x14014, 0x1000);
-		agnx_write32(ctl, 0x14018, 0x0);
-		agnx_write32(ctl, 0x16000, 0x1);
-		agnx_write32(ctl, 0x11004, 0x0);
-		agnx_write32(ctl, 0xec54, 0xa);
-		agnx_write32(ctl, 0xec1c, 0x50);
-	} else if (priv->revid > 1) {
-		reg = agnx_read32(ctl, 0xec18);
-		reg |= 0x8;
-		agnx_write32(ctl, 0xec18, reg);
-	}
-
-	/* Write the TX Fir Coefficient Table */
-	tx_fir_table_init(priv);
-
-	reg = agnx_read32(ctl, AGNX_PM_PMCTL);
-	reg &= ~0x8;
-	agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-	reg = agnx_read32(ctl, AGNX_PM_PLLCTL);
-	reg |= 0x1;
-	agnx_write32(ctl, AGNX_PM_PLLCTL, reg);
-
-/* 	reg = agnx_read32(ctl, 0x1a030); */
-/* 	reg &= ~0x4; */
-/* 	agnx_write32(ctl, 0x1a030, reg); */
-
-	agnx_write32(ctl, AGNX_GCR_TRACNT4, 0x113);
-} /* phy_init */
-
-static void chip_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	band_management_init(priv);
-
-	rf_chips_init(priv);
-
-	reg = agnx_read32(ctl, AGNX_PM_PMCTL);
-	reg |= 0x8;
-	agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
-	/* Initialize the PHY */
-	phy_init(priv);
-
-	encryption_init(priv);
-
-	tx_management_init(priv);
-
-	rx_management_init(priv);
-
-	power_manage_init(priv);
-
-	/* Initialize the Timers */
-	agnx_timer_init(priv);
-
-	/* Write 0xc390bf9 to Interrupt Mask (Disable TX) */
-	reg = 0xc390bf9 & ~IRQ_TX_BEACON;
-	reg &= ~IRQ_TX_DISABLE;
-	agnx_write32(ctl, AGNX_INT_MASK, reg);
-
-	reg = agnx_read32(ctl, AGNX_CIR_BLKCTL);
-	reg |= 0x800;
-	agnx_write32(ctl, AGNX_CIR_BLKCTL, reg);
-
-	/* set it when need get multicast enable? */
-	agnx_write32(ctl, AGNX_BM_MTSM, 0xff);
-} /* chip_init */
-
-
-static inline void set_promis_and_managed(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x10 | 0x2);
-	agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x10 | 0x2);
-}
-static inline void set_learn_mode(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x8);
-}
-static inline void set_scan_mode(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x20);
-}
-static inline void set_promiscuous_mode(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	/* agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x210);*/
-	agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x10);
-}
-static inline void set_managed_mode(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x2);
-}
-static inline void set_adhoc_mode(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x0);
-}
-
-#if 0
-static void unknow_register_write(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x0, 0x3e);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x4, 0xb2);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x8, 0x140);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0xc, 0x1C0);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x10, 0x1FF);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x14, 0x1DD);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x18, 0x15F);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x1c, 0xA1);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x20, 0x3E7);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x24, 0x36B);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x28, 0x348);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x2c, 0x37D);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x30, 0x3DE);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x34, 0x36);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x38, 0x64);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x3c, 0x57);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x40, 0x23);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x44, 0x3ED);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x48, 0x3C9);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x4c, 0x3CA);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x50, 0x3E7);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x54, 0x8);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x58, 0x1F);
-	agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x5c, 0x1a);
-}
-#endif
-
-static void card_interface_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u8 bssid[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-	u32 reg;
-	unsigned int i;
-	AGNX_TRACE;
-
-	might_sleep();
-	/* Clear RX Control and Enable RX queues */
-	agnx_write32(ctl, AGNX_CIR_RXCTL, 0x8);
-
-	might_sleep();
-	/* Do a full reset of the card */
-	card_full_reset(priv);
-	might_sleep();
-
-	/* Check and set Card Endianness */
-	reg = ioread32(priv->ctl + AGNX_CIR_ENDIAN);
-	/* TODO If not 0xB3B2B1B0 set to 0xB3B2B1B0 */
-	printk(KERN_INFO PFX "CIR_ENDIAN is %x\n", reg);
-
-
-	/* Config the eeprom */
-	agnx_write32(ctl, AGNX_CIR_SERIALITF, 0x7000086);
-	udelay(10);
-	reg = agnx_read32(ctl, AGNX_CIR_SERIALITF);
-
-
-	agnx_write32(ctl, AGNX_PM_SOFTRST, 0x80000033);
-	reg = agnx_read32(ctl, 0xec50);
-	reg |= 0xf;
-	agnx_write32(ctl, 0xec50, reg);
-	agnx_write32(ctl, AGNX_PM_SOFTRST, 0x0);
-
-
-	reg = agnx_read32(ctl, AGNX_SYSITF_GPIOIN);
-	udelay(10);
-	reg = agnx_read32(ctl, AGNX_CIR_SERIALITF);
-
-	/* Dump the eeprom */
-	do {
-		char eeprom[0x100000/0x100];
-
-		for (i = 0; i < 0x100000; i += 0x100) {
-			agnx_write32(ctl, AGNX_CIR_SERIALITF, 0x3000000 + i);
-			udelay(13);
-			reg = agnx_read32(ctl, AGNX_CIR_SERIALITF);
-			udelay(70);
-			reg = agnx_read32(ctl, AGNX_CIR_SERIALITF);
-			eeprom[i/0x100] = reg & 0xFF;
-			udelay(10);
-		}
-		print_hex_dump_bytes(PFX "EEPROM: ", DUMP_PREFIX_NONE, eeprom,
-				     ARRAY_SIZE(eeprom));
-	} while (0);
-
-	spi_rc_write(ctl, RF_CHIP0, 0x26);
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-
-	/* Initialize the system interface */
-	system_itf_init(priv);
-
-	might_sleep();
-	/* Chip Initialization (Polaris) */
-	chip_init(priv);
-	might_sleep();
-
-	/* Calibrate the antennae */
-	antenna_calibrate(priv);
-
-	reg = agnx_read32(ctl, 0xec50);
-	reg &= ~0x40;
-	agnx_write32(ctl, 0xec50, reg);
-	agnx_write32(ctl, AGNX_PM_SOFTRST, 0x0);
-	agnx_write32(ctl, AGNX_PM_PLLCTL, 0x1);
-
-	reg = agnx_read32(ctl, AGNX_BM_BMCTL);
-	reg |= 0x8000;
-	agnx_write32(ctl, AGNX_BM_BMCTL, reg);
-	enable_receiver(priv);
-	reg = agnx_read32(ctl, AGNX_SYSITF_SYSMODE);
-	reg |= 0x200;
-	agnx_write32(ctl, AGNX_SYSITF_SYSMODE, reg);
-	enable_receiver(priv);
-
-	might_sleep();
-	/* Initialize Gain Control Counts */
-	gain_ctlcnt_init(priv);
-
-	/* Write Initial Station Power Template for this station(#0) */
-	sta_power_init(priv, LOCAL_STAID);
-
-	might_sleep();
-	/* Initialize the rx,td,tm rings, for each node in the ring */
-	fill_rings(priv);
-
-	might_sleep();
-
-
-	agnx_write32(ctl, AGNX_PM_SOFTRST, 0x80000033);
-	agnx_write32(ctl, 0xec50, 0xc);
-	agnx_write32(ctl, AGNX_PM_SOFTRST, 0x0);
-
-	/* FIXME Initialize the transmit control register */
-	agnx_write32(ctl, AGNX_TXM_CTL, 0x194c1);
-
-	enable_receiver(priv);
-
-	might_sleep();
-	/* FIXME Set the Receive Control Mac Address to card address */
-	mac_address_set(priv);
-	enable_receiver(priv);
-	might_sleep();
-
-	/* Set the recieve request rate */
-	/* FIXME Enable the request */
-	/* Check packet length */
-	/* Set maximum packet length */
-/*	agnx_write32(ctl, AGNX_RXM_REQRATE, 0x88195e00); */
-/*	enable_receiver(priv); */
-
-	/* Set the Receiver BSSID */
-	receiver_bssid_set(priv, bssid);
-
-	/* FIXME Set to managed mode */
-	set_managed_mode(priv);
-/*	set_promiscuous_mode(priv); */
-/*	set_scan_mode(priv); */
-/*	set_learn_mode(priv); */
-/*	set_promis_and_managed(priv); */
-/*	set_adhoc_mode(priv); */
-
-	/* Set the recieve request rate */
-	/* Check packet length */
-	agnx_write32(ctl, AGNX_RXM_REQRATE, 0x08000000);
-	reg = agnx_read32(ctl, AGNX_RXM_REQRATE);
-	/* Set maximum packet length */
-	reg |= 0x00195e00;
-	agnx_write32(ctl, AGNX_RXM_REQRATE, reg);
-
-	/* Configure the RX and TX interrupt */
-	reg = ENABLE_RX_INTERRUPT | RX_CACHE_LINE | FRAG_LEN_2048 | FRAG_BE;
-	agnx_write32(ctl, AGNX_CIR_RXCFG, reg);
-	/* FIXME */
-	reg = ENABLE_TX_INTERRUPT | TX_CACHE_LINE | FRAG_LEN_2048 | FRAG_BE;
-	agnx_write32(ctl, AGNX_CIR_TXCFG, reg);
-
-	/* Enable RX TX Interrupts */
-	agnx_write32(ctl, AGNX_CIR_RXCTL, 0x80);
-	agnx_write32(ctl, AGNX_CIR_TXMCTL, 0x80);
-	agnx_write32(ctl, AGNX_CIR_TXDCTL, 0x80);
-
-	/* FIXME Set the master control interrupt in block control */
-	agnx_write32(ctl, AGNX_CIR_BLKCTL, 0x800);
-
-	/* Enable RX and TX queues */
-	reg = agnx_read32(ctl, AGNX_CIR_RXCTL);
-	reg |= 0x8;
-	agnx_write32(ctl, AGNX_CIR_RXCTL, reg);
-	reg = agnx_read32(ctl, AGNX_CIR_TXMCTL);
-	reg |= 0x8;
-	agnx_write32(ctl, AGNX_CIR_TXMCTL, reg);
-	reg = agnx_read32(ctl, AGNX_CIR_TXDCTL);
-	reg |= 0x8;
-	agnx_write32(ctl, AGNX_CIR_TXDCTL, reg);
-
-	agnx_write32(ctl, AGNX_SYSITF_GPIOUT, 0x5);
-	/* FIXME */
-	/*  unknow_register_write(priv); */
-	/* Update local card hash entry */
-	hash_write(priv, priv->mac_addr, LOCAL_STAID);
-
-	might_sleep();
-
-	/* FIXME */
-	agnx_set_channel(priv, 1);
-	might_sleep();
-} /* agnx_card_interface_init */
-
-
-void agnx_hw_init(struct agnx_priv *priv)
-{
-	AGNX_TRACE;
-	might_sleep();
-	card_interface_init(priv);
-}
-
-int agnx_hw_reset(struct agnx_priv *priv)
-{
-	return card_full_reset(priv);
-}
-
-int agnx_set_ssid(struct agnx_priv *priv, u8 *ssid, size_t ssid_len)
-{
-	AGNX_TRACE;
-	return 0;
-}
-
-void agnx_set_bssid(struct agnx_priv *priv, const u8 *bssid)
-{
-	receiver_bssid_set(priv, bssid);
-}
diff --git a/drivers/staging/agnx/phy.h b/drivers/staging/agnx/phy.h
deleted file mode 100644
index a955f05361e7..000000000000
--- a/drivers/staging/agnx/phy.h
+++ /dev/null
@@ -1,409 +0,0 @@
-#ifndef AGNX_PHY_H_
-#define AGNX_PHY_H_
-
-#include "agnx.h"
-
-/* Transmission Managment Registers */
-#define AGNX_TXM_BASE		0x0000
-#define AGNX_TXM_CTL		0x0000	/* control register */
-#define AGNX_TXM_ETMF		0x0004 /* enable transmission management functions */
-#define AGNX_TXM_TXTEMP		0x0008 /* transmission template */
-#define AGNX_TXM_RETRYSTAID	0x000c /* Retry Station ID */
-#define AGNX_TXM_TIMESTAMPLO		0x0010	/* Timestamp Lo */
-#define AGNX_TXM_TIMESTAMPHI		0x0014	/* Timestamp Hi */
-#define AGNX_TXM_TXDELAY	0x0018  /* tx delay */
-#define AGNX_TXM_TBTTLO		0x0020	/* tbtt Lo */
-#define AGNX_TXM_TBTTHI		0x0024	/* tbtt Hi */
-#define AGNX_TXM_BEAINTER	0x0028 /* Beacon Interval */
-#define AGNX_TXM_NAV		0x0030 /* NAV */
-#define AGNX_TXM_CFPMDV		0x0034 /* CFP MDV */
-#define AGNX_TXM_CFPERCNT	0x0038 /* CFP period count */
-#define AGNX_TXM_PROBDELAY	0x003c /* probe delay */
-#define AGNX_TXM_LISINTERCNT	0x0040 /* listen interval count */
-#define AGNX_TXM_DTIMPERICNT	0x004c /* DTIM period count */
-
-#define AGNX_TXM_BEACON_CTL	0x005c /* beacon control */
-
-#define AGNX_TXM_SCHEMPCNT	0x007c /* schedule empty count */
-#define AGNX_TXM_MAXTIMOUT	0x0084 /* max timeout exceed count */
-#define AGNX_TXM_MAXCFPTIM	0x0088 /* max CF poll timeout count */
-#define AGNX_TXM_MAXRXTIME	0x008c /* max RX timeout count */
-#define AGNX_TXM_MAXACKTIM	0x0090	/* max ACK timeout count */
-#define AGNX_TXM_DIF01		0x00a0 /* DIF 0-1 */
-#define AGNX_TXM_DIF23		0x00a4 /* DIF 2-3 */
-#define AGNX_TXM_DIF45		0x00a8 /* DIF 4-5 */
-#define AGNX_TXM_DIF67		0x00ac /* DIF 6-7 */
-#define AGNX_TXM_SIFSPIFS	0x00b0 /* SIFS/PIFS */
-#define AGNX_TXM_TIFSEIFS	0x00b4 /* TIFS/EIFS */
-#define AGNX_TXM_MAXCCACNTSLOT	0x00b8 /* max CCA count slot */
-#define AGNX_TXM_SLOTLIMIT	0x00bc /* slot limit/1 msec limit */
-#define AGNX_TXM_CFPOLLRXTIM	0x00f0 /* CF poll RX timeout count */
-#define AGNX_TXM_CFACKT11B	0x00f4 /* CF ack timeout limit for 11b */
-#define AGNX_TXM_CW0		0x0100 /* CW 0 */
-#define AGNX_TXM_SLBEALIM0	0x0108 /* short/long beacon limit 0 */
-#define AGNX_TXM_CW1		0x0120 /* CW 1 */
-#define AGNX_TXM_SLBEALIM1	0x0128 /* short/long beacon limit 1 */
-#define AGNX_TXM_CW2		0x0140 /* CW 2 */
-#define AGNX_TXM_SLBEALIM2	0x0148 /* short/long beacon limit 2 */
-#define AGNX_TXM_CW3		0x0160 /* CW 3 */
-#define AGNX_TXM_SLBEALIM3	0x0168 /* short/long beacon limit 3 */
-#define AGNX_TXM_CW4		0x0180 /* CW 4 */
-#define AGNX_TXM_SLBEALIM4	0x0188 /* short/long beacon limit 4 */
-#define AGNX_TXM_CW5		0x01a0 /* CW 5 */
-#define AGNX_TXM_SLBEALIM5	0x01a8 /* short/long beacon limit 5 */
-#define AGNX_TXM_CW6		0x01c0 /* CW 6 */
-#define AGNX_TXM_SLBEALIM6	0x01c8 /* short/long beacon limit 6 */
-#define AGNX_TXM_CW7		0x01e0 /* CW 7 */
-#define AGNX_TXM_SLBEALIM7	0x01e8 /* short/long beacon limit 7 */
-#define AGNX_TXM_BEACONTEMP     0x1000	/* beacon template */
-#define AGNX_TXM_STAPOWTEMP	0x1a00 /*  Station Power Template */
-
-/* Receive Management Control Registers */
-#define AGNX_RXM_BASE		0x2000
-#define AGNX_RXM_REQRATE	0x2000	/* requested rate */
-#define AGNX_RXM_MACHI		0x2004	/* first 4 bytes of mac address */
-#define AGNX_RXM_MACLO		0x2008	/* last 2 bytes of mac address */
-#define AGNX_RXM_BSSIDHI	0x200c	/* bssid hi */
-#define AGNX_RXM_BSSIDLO	0x2010	/* bssid lo */
-#define AGNX_RXM_HASH_CMD_FLAG	0x2014	/* Flags for the RX Hash Command Default:0 */
-#define AGNX_RXM_HASH_CMD_HIGH	0x2018	/* The High half of the Hash Command */
-#define AGNX_RXM_HASH_CMD_LOW	0x201c	/* The Low half of the Hash Command */
-#define AGNX_RXM_ROUTAB		0x2020	/* routing table */
-#define		ROUTAB_SUBTYPE_SHIFT	24
-#define		ROUTAB_TYPE_SHIFT	28
-#define		ROUTAB_STATUS_SHIFT	30
-#define		ROUTAB_RW_SHIFT		31
-#define		ROUTAB_ROUTE_DROP	0xf00000 /* Drop */
-#define		ROUTAB_ROUTE_CPU	0x400000 /* CPU */
-#define		ROUTAB_ROUTE_ENCRY	0x500800 /* Encryption */
-#define		ROUTAB_ROUTE_RFP	0x800000 /* RFP */
-
-#define		ROUTAB_TYPE_MANAG	0x0 /* Management */
-#define		ROUTAB_TYPE_CTL		0x1 /* Control */
-#define		ROUTAB_TYPE_DATA	0x2 /* Data */
-
-#define		ROUTAB_SUBTYPE_DATA		0x0
-#define		ROUTAB_SUBTYPE_DATAACK		0x1
-#define		ROUTAB_SUBTYPE_DATAPOLL		0x2
-#define		ROUTAB_SUBTYPE_DATAPOLLACK	0x3
-#define		ROUTAB_SUBTYPE_NULL		0x4 /* NULL */
-#define		ROUTAB_SUBTYPE_NULLACK		0x5
-#define		ROUTAB_SUBTYPE_NULLPOLL		0x6
-#define		ROUTAB_SUBTYPE_NULLPOLLACK	0x7
-#define		ROUTAB_SUBTYPE_QOSDATA		0x8 /* QOS DATA */
-#define		ROUTAB_SUBTYPE_QOSDATAACK	0x9
-#define		ROUTAB_SUBTYPE_QOSDATAPOLL	0xa
-#define		ROUTAB_SUBTYPE_QOSDATAACKPOLL	0xb
-#define		ROUTAB_SUBTYPE_QOSNULL		0xc
-#define		ROUTAB_SUBTYPE_QOSNULLACK	0xd
-#define		ROUTAB_SUBTYPE_QOSNULLPOLL	0xe
-#define		ROUTAB_SUBTYPE_QOSNULLPOLLACK	0xf
-#define AGNX_RXM_DELAY11	   0x2024	/* delay 11(AB) */
-#define AGNX_RXM_SOF_CNT	   0x2028	/* SOF Count */
-#define AGNX_RXM_FRAG_CNT	   0x202c	/* Fragment Count*/
-#define AGNX_RXM_FCS_CNT	   0x2030	/* FCS Count */
-#define AGNX_RXM_BSSID_MISS_CNT	   0x2034	/* BSSID Miss Count */
-#define AGNX_RXM_PDU_ERR_CNT	   0x2038	/* PDU Error Count */
-#define AGNX_RXM_DEST_MISS_CNT	   0x203C	/* Destination Miss Count */
-#define AGNX_RXM_DROP_CNT	   0x2040	/* Drop Count */
-#define AGNX_RXM_ABORT_CNT	   0x2044	/* Abort Count */
-#define AGNX_RXM_RELAY_CNT	   0x2048	/* Relay Count */
-#define AGNX_RXM_HASH_MISS_CNT	   0x204c	/* Hash Miss Count */
-#define AGNX_RXM_SA_HI		   0x2050	/* Address of received packet Hi */
-#define AGNX_RXM_SA_LO		   0x2054	/* Address of received packet Lo */
-#define AGNX_RXM_HASH_DUMP_LST	   0x2100	/* Contains Hash Data */
-#define AGNX_RXM_HASH_DUMP_MST	   0x2104	/* Contains Hash Data */
-#define AGNX_RXM_HASH_DUMP_DATA    0x2108	/* The Station ID to dump */
-
-
-/* Encryption Managment */
-#define AGNX_ENCRY_BASE		0x2400
-#define AGNX_ENCRY_WEPKEY0	0x2440 /* wep key #0 */
-#define AGNX_ENCRY_WEPKEY1	0x2444 /* wep key #1 */
-#define AGNX_ENCRY_WEPKEY2	0x2448 /* wep key #2 */
-#define AGNX_ENCRY_WEPKEY3	0x244c /* wep key #3 */
-#define AGNX_ENCRY_CCMRECTL	0x2460 /* ccm replay control */
-
-
-/* Band Management Registers */
-#define AGNX_BM_BASE		0x2c00
-#define AGNX_BM_BMCTL		0x2c00  /* band management control */
-#define AGNX_BM_TXWADDR		0x2c18  /* tx workqueue address start */
-#define AGNX_BM_TXTOPEER	0x2c24	/* transmit to peers */
-#define AGNX_BM_FPLHP		0x2c2c  /* free pool list head pointer */
-#define AGNX_BM_FPLTP		0x2c30  /* free pool list tail pointer */
-#define AGNX_BM_FPCNT		0x2c34  /* free pool count */
-#define AGNX_BM_CIPDUWCNT	0x2c38  /* card interface pdu workqueue count */
-#define AGNX_BM_SPPDUWCNT	0x2c3c  /* sp pdu workqueue count */
-#define AGNX_BM_RFPPDUWCNT	0x2c40  /* rfp pdu workqueue count */
-#define AGNX_BM_RHPPDUWCNT	0x2c44  /* rhp pdu workqueue count */
-#define AGNX_BM_CIWQCTL		0x2c48 /* Card Interface WorkQueue Control */
-#define AGNX_BM_CPUTXWCTL	0x2c50  /* cpu tx workqueue control */
-#define AGNX_BM_CPURXWCTL	0x2c58  /* cpu rx workqueue control */
-#define AGNX_BM_CPULWCTL	0x2c60 /* cpu low workqueue control */
-#define AGNX_BM_CPUHWCTL	0x2c68 /* cpu high workqueue control */
-#define AGNX_BM_SPTXWCTL	0x2c70 /* sp tx workqueue control */
-#define AGNX_BM_SPRXWCTL	0x2c78 /* sp rx workqueue control */
-#define AGNX_BM_RFPWCTL		0x2c80 /* RFP workqueue control */
-#define AGNX_BM_MTSM		0x2c90 /* Multicast Transmit Station Mask */
-
-/* Card Interface Registers (32bits) */
-#define AGNX_CIR_BASE		0x3000
-#define AGNX_CIR_BLKCTL		0x3000	/* block control*/
-#define		AGNX_STAT_TX	0x1
-#define		AGNX_STAT_RX	0x2
-#define		AGNX_STAT_X	0x4
-/* Below two interrupt flags will be set by our but not CPU or the card */
-#define		AGNX_STAT_TXD	0x10
-#define		AGNX_STAT_TXM	0x20
-
-#define AGNX_CIR_ADDRWIN	0x3004	/* Addressable Windows*/
-#define AGNX_CIR_ENDIAN		0x3008  /* card endianness */
-#define AGNX_CIR_SERIALITF	0x3020	/* serial interface */
-#define AGNX_CIR_RXCFG		0x3040	/* receive config */
-#define		ENABLE_RX_INTERRUPT 0x20
-#define		RX_CACHE_LINE	    0x8
-/* the RX fragment length */
-#define		FRAG_LEN_256	0x0 /* 256B */
-#define		FRAG_LEN_512	0x1
-#define		FRAG_LEN_1024	0x2
-#define		FRAG_LEN_2048	0x3
-#define		FRAG_BE		0x10
-#define AGNX_CIR_RXCTL		0x3050	/* receive control */
-/* memory address, chipside */
-#define AGNX_CIR_RXCMSTART	0x3054	/* receive client memory start */
-#define AGNX_CIR_RXCMEND	0x3058	/* receive client memory end */
-/* memory address, pci */
-#define AGNX_CIR_RXHOSTADDR	0x3060	/* receive hostside address */
-/* memory address, chipside */
-#define AGNX_CIR_RXCLIADDR	0x3064	/* receive clientside address */
-#define AGNX_CIR_RXDMACTL	0x3068	/* receive dma control */
-#define AGNX_CIR_TXCFG		0x3080	/* transmit config */
-#define AGNX_CIR_TXMCTL		0x3090 /* Transmit Management Control */
-#define		ENABLE_TX_INTERRUPT 0x20
-#define		TX_CACHE_LINE	    0x8
-#define AGNX_CIR_TXMSTART	0x3094 /* Transmit Management Start */
-#define AGNX_CIR_TXMEND		0x3098 /* Transmit Management End */
-#define AGNX_CIR_TXDCTL		0x30a0	/* transmit data control */
-/* memeory address, chipset */
-#define AGNX_CIR_TXDSTART	0x30a4	/* transmit data start */
-#define AGNX_CIR_TXDEND		0x30a8	/* transmit data end */
-#define AGNX_CIR_TXMHADDR	0x30b0 /* Transmit Management Hostside Address */
-#define AGNX_CIR_TXMCADDR	0x30b4 /* Transmit Management Clientside Address */
-#define AGNX_CIR_TXDMACTL	0x30b8	/* transmit dma control */
-
-
-/* Power Managment Unit */
-#define AGNX_PM_BASE		0x3c00
-#define AGNX_PM_PMCTL		0x3c00	/* PM Control*/
-#define AGNX_PM_MACMSW		0x3c08 /* MAC Manual Slow Work Enable */
-#define AGNX_PM_RFCTL		0x3c0c /* RF Control */
-#define AGNX_PM_PHYMW		0x3c14	/* Phy Mannal Work */
-#define AGNX_PM_SOFTRST		0x3c18	/* PMU Soft Reset */
-#define AGNX_PM_PLLCTL		0x3c1c	/* PMU PLL control*/
-#define AGNX_PM_TESTPHY		0x3c24 /* PMU Test Phy */
-
-
-/* Interrupt Control interface */
-#define AGNX_INT_BASE		0x4000
-#define AGNX_INT_STAT		0x4000	/* interrupt status */
-#define AGNX_INT_MASK		0x400c	/* interrupt mask */
-/* FIXME */
-#define		IRQ_TX_BEACON	0x1	/* TX Beacon */
-#define		IRQ_TX_RETRY	0x8	/* TX Retry Interrupt */
-#define		IRQ_TX_ACTIVITY	0x10	/* TX Activity */
-#define		IRQ_RX_ACTIVITY	0x20	/* RX Activity */
-/* FIXME I guess that instead RX a none exist staion's packet or
-   the station hasn't been init */
-#define		IRQ_RX_X	0x40
-#define		IRQ_RX_Y	0x80	/* RX ? */
-#define		IRQ_RX_HASHHIT	0x100	/* RX Hash Hit */
-#define		IRQ_RX_FRAME	0x200	/* RX Frame */
-#define		IRQ_ERR_INT	0x400	/* Error Interrupt */
-#define		IRQ_TX_QUE_FULL	0x800	/* TX Workqueue Full */
-#define		IRQ_BANDMAN_ERR	0x10000	/* Bandwidth Management Error */
-#define		IRQ_TX_DISABLE	0x20000	/* TX Disable */
-#define		IRQ_RX_IVASESKEY 0x80000 /* RX Invalid Session Key */
-#define		IRQ_RX_KEYIDMIS	0x100000 /* RX key ID Mismatch */
-#define		IRQ_REP_THHIT	0x200000 /* Replay Threshold Hit */
-#define		IRQ_TIMER1	0x4000000 /* Timer1 */
-#define		IRQ_TIMER_CNT	0x10000000 /* Timer Count */
-#define		IRQ_PHY_FASTINT 0x20000000 /* Phy Fast Interrupt */
-#define		IRQ_PHY_SLOWINT	0x40000000 /* Phy Slow Interrupt */
-#define		IRQ_OTHER	0x80000000 /* Unknow interrupt */
-#define		AGNX_IRQ_ALL   	0xffffffff
-
-/* System Interface */
-#define AGNX_SYSITF_BASE	0x4400
-#define AGNX_SYSITF_SYSMODE	0x4400	/* system mode */
-#define AGNX_SYSITF_GPIOIN	0x4410 /* GPIO In */
-/* PIN lines for leds? */
-#define AGNX_SYSITF_GPIOUT	0x4414	/* GPIO Out */
-
-/* Timer Control */
-#define AGNX_TIMCTL_TIMER1	0x4800 /* Timer 1 */
-#define AGNX_TIMCTL_TIM1CTL	0x4808 /* Timer 1 Control */
-
-
-/* Antenna Calibration Interface */
-#define AGNX_ACI_BASE		0x5000
-#define AGNX_ACI_MODE		0x5000 /* Mode */
-#define AGNX_ACI_MEASURE	0x5004 /* Measure */
-#define AGNX_ACI_SELCHAIN	0x5008 /* Select Chain */
-#define AGNX_ACI_LEN		0x500c /* Length */
-#define AGNX_ACI_TIMER1		0x5018 /* Timer 1 */
-#define AGNX_ACI_TIMER2		0x501c /* Timer 2 */
-#define AGNX_ACI_OFFSET		0x5020 /* Offset */
-#define AGNX_ACI_STATUS		0x5030 /* Status */
-#define		CALI_IDLE	0x0
-#define		CALI_DONE	0x1
-#define		CALI_BUSY	0x2
-#define		CALI_ERR	0x3
-#define AGNX_ACI_AICCHA0OVE	0x5034 /* AIC Channel 0 Override */
-#define AGNX_ACI_AICCHA1OVE	0x5038 /* AIC Channel 1 Override */
-
-/* Gain Control Registers */
-#define AGNX_GCR_BASE		0x9000
-/* threshold of primary antenna */
-#define AGNX_GCR_THD0A		0x9000	/* threshold? D0 A */
-/* low threshold of primary antenna */
-#define AGNX_GCR_THD0AL		0x9004	/* threshold? D0 A low */
-/* threshold of secondary antenna */
-#define AGNX_GCR_THD0B		0x9008	/* threshold? D0_B */
-#define AGNX_GCR_DUNSAT		0x900c /* d unsaturated */
-#define AGNX_GCR_DSAT		0x9010 /* d saturated */
-#define AGNX_GCR_DFIRCAL	0x9014 /* D Fir/Cal */
-#define AGNX_GCR_DGCTL11A	0x9018 /* d gain control 11a */
-#define AGNX_GCR_DGCTL11B	0x901c /* d gain control 11b */
-/* strength of gain */
-#define AGNX_GCR_GAININIT	0x9020	/* gain initialization */
-#define AGNX_GCR_THNOSIG	0x9024 /* threhold no signal */
-#define AGNX_GCR_COARSTEP	0x9028 /* coarse stepping */
-#define AGNX_GCR_SIFST11A	0x902c /* sifx time 11a */
-#define AGNX_GCR_SIFST11B	0x9030 /* sifx time 11b */
-#define AGNX_GCR_CWDETEC	0x9034 /* cw detection */
-#define AGNX_GCR_0X38		0x9038 /* ???? */
-#define AGNX_GCR_BOACT		0x903c	/* BO Active */
-#define AGNX_GCR_BOINACT	0x9040	/* BO Inactive */
-#define AGNX_GCR_BODYNA		0x9044	/* BO dynamic */
-/* 802.11 mode(a,b,g) */
-#define AGNX_GCR_DISCOVMOD	0x9048	/* discovery mode */
-#define AGNX_GCR_NLISTANT	0x904c	/* number of listening antenna */
-#define AGNX_GCR_NACTIANT	0x9050	/* number of active antenna */
-#define AGNX_GCR_NMEASANT	0x9054	/* number of measuring antenna */
-#define AGNX_GCR_NCAPTANT	0x9058	/* number of capture antenna */
-#define AGNX_GCR_THCAP11A	0x905c /* threshold capture 11a */
-#define AGNX_GCR_THCAP11B	0x9060 /* threshold capture 11b */
-#define AGNX_GCR_THCAPRX11A	0x9064 /* threshold capture rx 11a */
-#define AGNX_GCR_THCAPRX11B	0x9068 /* threshold capture rx 11b */
-#define AGNX_GCR_THLEVDRO	0x906c /* threshold level drop */
-#define AGNX_GCR_GAINSET0	0x9070 /* Gainset 0 */
-#define AGNX_GCR_GAINSET1	0x9074 /* Gainset 1 */
-#define AGNX_GCR_GAINSET2	0x9078 /* Gainset 2 */
-#define AGNX_GCR_MAXRXTIME11A	0x907c /* maximum rx time 11a */
-#define AGNX_GCR_MAXRXTIME11B	0x9080 /* maximum rx time 11b */
-#define AGNX_GCR_CORRTIME	0x9084 /* correction time */
-/* reset the subsystem, 0 = disable, 1 = enable */
-#define AGNX_GCR_RSTGCTL	0x9088	/* reset gain control */
-/* channel receiving */
-#define AGNX_GCR_RXCHANEL	0x908c	/* receive channel */
-#define AGNX_GCR_NOISE0		0x9090 /* Noise 0 */
-#define AGNX_GCR_NOISE1		0x9094 /* Noise 1 */
-#define AGNX_GCR_NOISE2		0x9098 /* Noise 2 */
-#define AGNX_GCR_SIGHTH		0x909c	/* Signal High Threshold */
-#define AGNX_GCR_SIGLTH		0x90a0	/* Signal Low Threshold */
-#define AGNX_GCR_CORRDROP	0x90a4 /* correction drop */
-/* threshold of tertiay antenna */
-#define AGNX_GCR_THCD		0x90a8	/* threshold? CD */
-#define AGNX_GCR_THCS		0x90ac	/* threshold? CS */
-#define AGNX_GCR_MAXPOWDIFF	0x90b8 /* maximum power difference */
-#define AGNX_GCR_TRACNT4	0x90ec /* Transition Count 4 */
-#define AGNX_GCR_TRACNT5      	0x90f0	/* transition count 5 */
-#define AGNX_GCR_TRACNT6       	0x90f4	/* transition count 6 */
-#define AGNX_GCR_TRACNT7       	0x90f8	/* transition coutn 7 */
-#define AGNX_GCR_TESTBUS	0x911c /* test bus */
-#define AGNX_GCR_CHAINNUM	0x9120 /* Number of Chains */
-#define AGNX_GCR_ANTCFG		0x9124	/* Antenna Config */
-#define AGNX_GCR_THJUMP		0x912c /* threhold jump */
-#define AGNX_GCR_THPOWER	0x9130 /* threshold power */
-#define AGNX_GCR_THPOWCLIP	0x9134 /* threshold power clip*/
-#define AGNX_GCR_FORCECTLCLK	0x9138 /* Force Gain Control Clock */
-#define AGNX_GCR_GAINSETWRITE	0x913c /* Gainset Write */
-#define AGNX_GCR_THD0BTFEST	0x9140	/* threshold d0 b tf estimate */
-#define AGNX_GCR_THRX11BPOWMIN	0x9144	/* threshold rx 11b power minimum */
-#define AGNX_GCR_0X14c		0x914c /* ?? */
-#define AGNX_GCR_0X150		0x9150 /* ?? */
-#define AGNX_GCR_RXOVERIDE	0x9194	/* recieve override */
-#define AGNX_GCR_WATCHDOG	0x91b0	/* watchdog timeout */
-
-
-/* Spi Interface */
-#define AGNX_SPI_BASE		0xdc00
-#define AGNX_SPI_CFG		0xdc00 /* spi configuration */
-/* Only accept 16 bits */
-#define AGNX_SPI_WMSW		0xdc04	/* write most significant word */
-/* Only accept 16 bits */
-#define AGNX_SPI_WLSW		0xdc08	/* write least significant word */
-#define AGNX_SPI_CTL		0xdc0c	/* spi control */
-#define AGNX_SPI_RMSW		0xdc10 /* read most significant word */
-#define AGNX_SPI_RLSW		0xdc14 /* read least significant word */
-/* SPI Control Mask */
-#define		SPI_READ_CTL		0x4000 /* read control */
-#define		SPI_BUSY_CTL		0x8000 /* busy control */
-/* RF and synth chips in spi */
-#define		RF_CHIP0	0x400
-#define		RF_CHIP1	0x800
-#define		RF_CHIP2	0x1000
-#define		SYNTH_CHIP	0x2000
-
-/* Unknown register */
-#define AGNX_UNKNOWN_BASE	0x7800
-
-/* FIXME MonitorGain */
-#define AGNX_MONGCR_BASE	0x12000
-
-/* Gain Table */
-#define AGNX_GAIN_TABLE		0x12400
-
-/* The initial FIR coefficient table */
-#define AGNX_FIR_BASE		0x19804
-
-#define AGNX_ENGINE_LOOKUP_TBL	0x800
-
-/* eeprom commands */
-#define EEPROM_CMD_NULL		0x0 /* NULL */
-#define EEPROM_CMD_WRITE	0x2 /* write */
-#define EEPROM_CMD_READ		0x3 /* read */
-#define EEPROM_CMD_STATUSREAD	0x5 /* status register read */
-#define EEPROM_CMD_WRITEENABLE	0x6 /* write enable */
-#define EEPROM_CMD_CONFIGURE	0x7 /* configure */
-
-#define EEPROM_DATAFORCOFIGURE	0x6 /* ??? */
-
-/* eeprom address */
-#define EEPROM_ADDR_SUBVID	0x0 /* Sub Vendor ID */
-#define EEPROM_ADDR_SUBSID	0x2 /* Sub System ID */
-#define EEPROM_ADDR_MACADDR	0x146 /* MAC Address */
-#define EEPROM_ADDR_LOTYPE	0x14f /* LO type */
-
-struct agnx_eeprom {
-	u8 data;	/* date */
-	u16 address;	/* address in EEPROM */
-	u8 cmd;		/* command, unknown, status */
-}  __attribute__((__packed__));
-
-#define AGNX_EEPROM_COMMAND_SHIFT	5
-#define AGNX_EEPROM_COMMAND_STAT	0x01
-
-void disable_receiver(struct agnx_priv *priv);
-void enable_receiver(struct agnx_priv *priv);
-u8 read_from_eeprom(struct agnx_priv *priv, u16 address);
-void agnx_hw_init(struct agnx_priv *priv);
-int agnx_hw_reset(struct agnx_priv *priv);
-int agnx_set_ssid(struct agnx_priv *priv, u8 *ssid, size_t ssid_len);
-void agnx_set_bssid(struct agnx_priv *priv, const u8 *bssid);
-void enable_power_saving(struct agnx_priv *priv);
-void disable_power_saving(struct agnx_priv *priv);
-void calibrate_antenna_period(unsigned long data);
-
-#endif /* AGNX_PHY_H_ */
diff --git a/drivers/staging/agnx/rf.c b/drivers/staging/agnx/rf.c
deleted file mode 100644
index 42e457a1844f..000000000000
--- a/drivers/staging/agnx/rf.c
+++ /dev/null
@@ -1,893 +0,0 @@
-/**
- * Airgo MIMO wireless driver
- *
- * Copyright (c) 2007 Li YanBo <dreamfly281@gmail.com>
-
- * Thanks for Jeff Williams <angelbane@gmail.com> do reverse engineer
- * works and published the SPECS at http://airgo.wdwconsulting.net/mymoin
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation;
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include "agnx.h"
-#include "debug.h"
-#include "phy.h"
-#include "table.h"
-
-/* FIXME! */
-static inline void spi_write(void __iomem *region, u32 chip_ids, u32 sw,
-		      u16 size, u32 control)
-{
-	u32 reg;
-	u32 lsw = sw & 0xffff;		/* lower 16 bits of sw*/
-	u32 msw = sw >> 16;		/* high 16 bits of sw */
-
-	/* FIXME Write Most Significant Word of the 32bit data to MSW */
-	/* FIXME And Least Significant Word to LSW */
-	iowrite32((lsw), region + AGNX_SPI_WLSW);
-	iowrite32((msw), region + AGNX_SPI_WMSW);
-	reg = chip_ids | size | control;
-	/* Write chip id(s), write size and busy control to Control Register */
-	iowrite32((reg), region + AGNX_SPI_CTL);
-	/* Wait for Busy control to clear */
-	spi_delay();
-}
-
-/*
- * Write to SPI Synth register
- */
-static inline void spi_sy_write(void __iomem *region, u32 chip_ids, u32 sw)
-{
-	/* FIXME the size 0x15 is a magic value*/
-	spi_write(region, chip_ids, sw, 0x15, SPI_BUSY_CTL);
-}
-
-/*
- * Write to SPI RF register
- */
-static inline void spi_rf_write(void __iomem *region, u32 chip_ids, u32 sw)
-{
-	/* FIXME the size 0xd is a magic value*/
-	spi_write(region, chip_ids, sw, 0xd, SPI_BUSY_CTL);
-} /* spi_rf_write */
-
-/*
- * Write to SPI with Read Control bit set
- */
-inline void spi_rc_write(void __iomem *region, u32 chip_ids, u32 sw)
-{
-	/* FIXME the size 0xe5 is a magic value */
-	spi_write(region, chip_ids, sw, 0xe5, SPI_BUSY_CTL|SPI_READ_CTL);
-}
-
-/* Get the active chains's count */
-static int get_active_chains(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	int num = 0;
-	u32 reg;
-	AGNX_TRACE;
-
-	spi_rc_write(ctl, RF_CHIP0, 0x21);
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-	if (reg == 1)
-		num++;
-
-	spi_rc_write(ctl, RF_CHIP1, 0x21);
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-	if (reg == 1)
-		num++;
-
-	spi_rc_write(ctl, RF_CHIP2, 0x21);
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-	if (reg == 1)
-		num++;
-
-	spi_rc_write(ctl, RF_CHIP0, 0x26);
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-	if (0x33 != reg)
-		printk(KERN_WARNING PFX "Unmatched rf chips result\n");
-
-	return num;
-} /* get_active_chains */
-
-void rf_chips_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	int num;
-	AGNX_TRACE;
-
-	if (priv->revid == 1) {
-		reg = agnx_read32(ctl, AGNX_SYSITF_GPIOUT);
-		reg |= 0x8;
-		agnx_write32(ctl, AGNX_SYSITF_GPIOUT, reg);
-	}
-
-	/* Set SPI clock speed to 200NS */
-	reg = agnx_read32(ctl, AGNX_SPI_CFG);
-	reg &= ~0xF;
-	reg |= 0x3;
-	agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
-	/* Set SPI clock speed to 50NS */
-	reg = agnx_read32(ctl, AGNX_SPI_CFG);
-	reg &= ~0xF;
-	reg |= 0x1;
-	agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1101);
-
-	num = get_active_chains(priv);
-	printk(KERN_INFO PFX "Active chains are %d\n", num);
-
-	reg = agnx_read32(ctl, AGNX_SPI_CFG);
-	reg &= ~0xF;
-	agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1908);
-} /* rf_chips_init */
-
-
-static u32 channel_tbl[15][9] = {
-	{0,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
-	{1,  0x00, 0x00, 0x624, 0x00, 0x1a4, 0x28, 0x00, 0x1e},
-	{2,  0x00, 0x00, 0x615, 0x00, 0x1ae, 0x28, 0x00, 0x1e},
-	{3,  0x00, 0x00, 0x61a, 0x00, 0x1ae, 0x28, 0x00, 0x1e},
-	{4,  0x00, 0x00, 0x61f, 0x00, 0x1ae, 0x28, 0x00, 0x1e},
-	{5,  0x00, 0x00, 0x624, 0x00, 0x1ae, 0x28, 0x00, 0x1e},
-	{6,  0x00, 0x00, 0x61f, 0x00, 0x1b3, 0x28, 0x00, 0x1e},
-	{7,  0x00, 0x00, 0x624, 0x00, 0x1b3, 0x28, 0x00, 0x1e},
-	{8,  0x00, 0x00, 0x629, 0x00, 0x1b3, 0x28, 0x00, 0x1e},
-	{9,  0x00, 0x00, 0x624, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
-	{10, 0x00, 0x00, 0x629, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
-	{11, 0x00, 0x00, 0x62e, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
-	{12, 0x00, 0x00, 0x633, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
-	{13, 0x00, 0x00, 0x628, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
-	{14, 0x00, 0x00, 0x644, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
-};
-
-
-static inline void
-channel_tbl_write(struct agnx_priv *priv, unsigned int channel, unsigned int reg_num)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-
-	reg = channel_tbl[channel][reg_num];
-	reg <<= 4;
-	reg |= reg_num;
-	spi_sy_write(ctl, SYNTH_CHIP, reg);
-}
-
-static void synth_freq_set(struct agnx_priv *priv, unsigned int channel)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
-
-	/* Set the Clock bits to 50NS */
-	reg = agnx_read32(ctl, AGNX_SPI_CFG);
-	reg &= ~0xF;
-	reg |= 0x1;
-	agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
-	/* Write 0x00c0 to LSW and 0x3 to MSW of Synth Chip */
-	spi_sy_write(ctl, SYNTH_CHIP, 0x300c0);
-
-	spi_sy_write(ctl, SYNTH_CHIP, 0x32);
-
-	/* # Write to Register 1 on the Synth Chip */
-	channel_tbl_write(priv, channel, 1);
-	/* # Write to Register 3 on the Synth Chip */
-	channel_tbl_write(priv, channel, 3);
-	/* # Write to Register 6 on the Synth Chip */
-	channel_tbl_write(priv, channel, 6);
-	/* # Write to Register 5 on the Synth Chip */
-	channel_tbl_write(priv, channel, 5);
-	/* # Write to register 8 on the Synth Chip */
-	channel_tbl_write(priv, channel, 8);
-
-	/* FIXME Clear the clock bits */
-	reg = agnx_read32(ctl, AGNX_SPI_CFG);
-	reg &= ~0xf;
-	agnx_write32(ctl, AGNX_SPI_CFG, reg);
-} /* synth_chip_init */
-
-
-static void antenna_init(struct agnx_priv *priv, int num_antenna)
-{
-	void __iomem *ctl = priv->ctl;
-
-	switch (num_antenna) {
-	case 1:
-		agnx_write32(ctl, AGNX_GCR_NLISTANT, 1);
-		agnx_write32(ctl, AGNX_GCR_NMEASANT, 1);
-		agnx_write32(ctl, AGNX_GCR_NACTIANT, 1);
-		agnx_write32(ctl, AGNX_GCR_NCAPTANT, 1);
-
-		agnx_write32(ctl, AGNX_GCR_ANTCFG, 7);
-		agnx_write32(ctl, AGNX_GCR_BOACT, 34);
-		agnx_write32(ctl, AGNX_GCR_BOINACT, 34);
-		agnx_write32(ctl, AGNX_GCR_BODYNA, 30);
-
-		agnx_write32(ctl, AGNX_GCR_THD0A, 125);
-		agnx_write32(ctl, AGNX_GCR_THD0AL, 100);
-		agnx_write32(ctl, AGNX_GCR_THD0B, 90);
-
-		agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 80);
-		agnx_write32(ctl, AGNX_GCR_SIGHTH, 100);
-		agnx_write32(ctl, AGNX_GCR_SIGLTH, 16);
-		break;
-	case 2:
-		agnx_write32(ctl, AGNX_GCR_NLISTANT, 2);
-		agnx_write32(ctl, AGNX_GCR_NMEASANT, 2);
-		agnx_write32(ctl, AGNX_GCR_NACTIANT, 2);
-		agnx_write32(ctl, AGNX_GCR_NCAPTANT, 2);
-		agnx_write32(ctl, AGNX_GCR_ANTCFG, 15);
-		agnx_write32(ctl, AGNX_GCR_BOACT, 36);
-		agnx_write32(ctl, AGNX_GCR_BOINACT, 36);
-		agnx_write32(ctl, AGNX_GCR_BODYNA, 32);
-		agnx_write32(ctl, AGNX_GCR_THD0A, 120);
-		agnx_write32(ctl, AGNX_GCR_THD0AL, 100);
-		agnx_write32(ctl, AGNX_GCR_THD0B, 80);
-		agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 70);
-		agnx_write32(ctl, AGNX_GCR_SIGHTH, 100);
-		agnx_write32(ctl, AGNX_GCR_SIGLTH, 32);
-		break;
-	case 3:
-		agnx_write32(ctl, AGNX_GCR_NLISTANT, 3);
-		agnx_write32(ctl, AGNX_GCR_NMEASANT, 3);
-		agnx_write32(ctl, AGNX_GCR_NACTIANT, 3);
-		agnx_write32(ctl, AGNX_GCR_NCAPTANT, 3);
-		agnx_write32(ctl, AGNX_GCR_ANTCFG, 31);
-		agnx_write32(ctl, AGNX_GCR_BOACT, 36);
-		agnx_write32(ctl, AGNX_GCR_BOINACT, 36);
-		agnx_write32(ctl, AGNX_GCR_BODYNA, 32);
-		agnx_write32(ctl, AGNX_GCR_THD0A, 100);
-		agnx_write32(ctl, AGNX_GCR_THD0AL, 100);
-		agnx_write32(ctl, AGNX_GCR_THD0B, 70);
-		agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 70);
-		agnx_write32(ctl, AGNX_GCR_SIGHTH, 100);
-		agnx_write32(ctl, AGNX_GCR_SIGLTH, 48);
-/*		agnx_write32(ctl, AGNX_GCR_SIGLTH, 16); */
-		break;
-	default:
-		printk(KERN_WARNING PFX "Unknow antenna number\n");
-	}
-} /* antenna_init */
-
-static void chain_update(struct agnx_priv *priv, u32 chain)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	spi_rc_write(ctl, RF_CHIP0, 0x20);
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-
-	if (reg == 0x4)
-		spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, reg|0x1000);
-	else if (reg != 0x0)
-		spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, reg|0x1000);
-	else {
-		if (chain == 3 || chain == 6) {
-			spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, reg|0x1000);
-			agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-		} else if (chain == 2 || chain == 4) {
-			spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, reg|0x1000);
-			spi_rf_write(ctl, RF_CHIP2, 0x1005);
-			agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x824);
-		} else if (chain == 1) {
-			spi_rf_write(ctl, RF_CHIP0, reg|0x1000);
-			spi_rf_write(ctl, RF_CHIP1|RF_CHIP2, 0x1004);
-			agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0xc36);
-		}
-	}
-
-	spi_rc_write(ctl, RF_CHIP0, 0x22);
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-
-	switch (reg) {
-	case 0:
-		spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1005);
-		break;
-	case 1:
-		spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
-		break;
-	case 2:
-		if (chain == 6 || chain == 4) {
-			spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1202);
-			spi_rf_write(ctl, RF_CHIP2, 0x1005);
-		} else if (chain < 3) {
-			spi_rf_write(ctl, RF_CHIP0, 0x1202);
-			spi_rf_write(ctl, RF_CHIP1|RF_CHIP2, 0x1005);
-		}
-		break;
-	default:
-		if (chain == 3) {
-			spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1203);
-			spi_rf_write(ctl, RF_CHIP2, 0x1201);
-		} else if (chain == 2) {
-			spi_rf_write(ctl, RF_CHIP0, 0x1203);
-			spi_rf_write(ctl, RF_CHIP2, 0x1200);
-			spi_rf_write(ctl, RF_CHIP1, 0x1201);
-		} else if (chain == 1) {
-			spi_rf_write(ctl, RF_CHIP0, 0x1203);
-			spi_rf_write(ctl, RF_CHIP1|RF_CHIP2, 0x1200);
-		} else if (chain == 4) {
-			spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1203);
-			spi_rf_write(ctl, RF_CHIP2, 0x1201);
-		} else {
-			spi_rf_write(ctl, RF_CHIP0, 0x1203);
-			spi_rf_write(ctl, RF_CHIP1|RF_CHIP2, 0x1201);
-		}
-	}
-} /* chain_update */
-
-static void antenna_config(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	/* Write 0x0 to the TX Management Control Register Enable bit */
-	reg = agnx_read32(ctl, AGNX_TXM_CTL);
-	reg &= ~0x1;
-	agnx_write32(ctl, AGNX_TXM_CTL, reg);
-
-	/* FIXME */
-	/* Set initial value based on number of Antennae */
-	antenna_init(priv, 3);
-
-	/* FIXME Update Power Templates for current valid Stations */
-	/* sta_power_init(priv, 0);*/
-
-	/* FIXME the number of chains should get from eeprom*/
-	chain_update(priv, AGNX_CHAINS_MAX);
-} /* antenna_config */
-
-void calibrate_oscillator(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	spi_rc_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
-	reg = agnx_read32(ctl, AGNX_GCR_GAINSET1);
-	reg |= 0x10;
-	agnx_write32(ctl, AGNX_GCR_GAINSET1, reg);
-
-	agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 1);
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 1);
-
-	agnx_write32(ctl, AGNX_ACI_LEN, 0x3ff);
-
-	agnx_write32(ctl, AGNX_ACI_TIMER1, 0x27);
-	agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
-	/* (Residual DC Calibration) to Calibration Mode */
-	agnx_write32(ctl, AGNX_ACI_MODE, 0x2);
-
-	spi_rc_write(ctl, RF_CHIP0|RF_CHIP1, 0x1004);
-	agnx_write32(ctl, AGNX_ACI_LEN, 0x3ff);
-	/* (TX LO Calibration) to Calibration Mode */
-	agnx_write32(ctl, AGNX_ACI_MODE, 0x4);
-
-	do {
-		u32  reg1, reg2, reg3;
-		/* Enable Power Saving Control */
-		enable_power_saving(priv);
-		/* Save the following registers to restore */
-		reg1 = ioread32(ctl + 0x11000);
-		reg2 = ioread32(ctl + 0xec50);
-		reg3 = ioread32(ctl + 0xec54);
-		wmb();
-
-		agnx_write32(ctl, 0x11000, 0xcfdf);
-		agnx_write32(ctl, 0xec50, 0x70);
-		/* Restore the registers */
-		agnx_write32(ctl, 0x11000, reg1);
-		agnx_write32(ctl, 0xec50, reg2);
-		agnx_write32(ctl, 0xec54, reg3);
-		/* Disable Power Saving Control */
-		disable_power_saving(priv);
-	} while (0);
-
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0);
-} /* calibrate_oscillator */
-
-
-static void radio_channel_set(struct agnx_priv *priv, unsigned int channel)
-{
-	void __iomem *ctl = priv->ctl;
-	unsigned int freq = priv->band.channels[channel - 1].center_freq;
-	u32 reg;
-	AGNX_TRACE;
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
-	/* Set SPI Clock to 50 Ns */
-	reg = agnx_read32(ctl, AGNX_SPI_CFG);
-	reg &= ~0xF;
-	reg |= 0x1;
-	agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
-	/* Clear the Disable Tx interrupt bit in Interrupt Mask */
-/* 	reg = agnx_read32(ctl, AGNX_INT_MASK); */
-/* 	reg &= ~IRQ_TX_DISABLE; */
-/* 	agnx_write32(ctl, AGNX_INT_MASK, reg); */
-
-	/* Band Selection */
-	reg = agnx_read32(ctl, AGNX_SYSITF_GPIOUT);
-	reg |= 0x8;
-	agnx_write32(ctl, AGNX_SYSITF_GPIOUT, reg);
-
-	/* FIXME Set the SiLabs Chip Frequency */
-	synth_freq_set(priv, channel);
-
-	reg = agnx_read32(ctl, AGNX_PM_SOFTRST);
-	reg |= 0x80100030;
-	agnx_write32(ctl, AGNX_PM_SOFTRST, reg);
-	reg = agnx_read32(ctl, AGNX_PM_PLLCTL);
-	reg |= 0x20009;
-	agnx_write32(ctl, AGNX_PM_PLLCTL, reg);
-
-	agnx_write32(ctl, AGNX_SYSITF_GPIOUT, 0x5);
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1100);
-
-	/* Load the MonitorGain Table */
-	monitor_gain_table_init(priv);
-
-	/* Load the TX Fir table */
-	tx_fir_table_init(priv);
-
-	reg = agnx_read32(ctl, AGNX_PM_PMCTL);
-	reg |= 0x8;
-	agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
-	spi_rc_write(ctl, RF_CHIP0|RF_CHIP1, 0x22);
-	udelay(80);
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-
-
-	agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0xff);
-	agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
-
-	reg = agnx_read32(ctl, 0xec50);
-	reg |= 0x4f;
-	agnx_write32(ctl, 0xec50, reg);
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
-	agnx_write32(ctl, 0x11008, 0x1);
-	agnx_write32(ctl, 0x1100c, 0x0);
-	agnx_write32(ctl, 0x11008, 0x0);
-	agnx_write32(ctl, 0xec50, 0xc);
-
-	agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
-	agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-	agnx_write32(ctl, 0x11010, 0x6e);
-	agnx_write32(ctl, 0x11014, 0x6c);
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
-
-	/* Calibrate the Antenna */
-	/* antenna_calibrate(priv); */
-	/* Calibrate the TxLocalOscillator */
-	calibrate_oscillator(priv);
-
-	reg = agnx_read32(ctl, AGNX_PM_PMCTL);
-	reg &= ~0x8;
-	agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-	agnx_write32(ctl, AGNX_GCR_GAININIT, 0xa);
-	agnx_write32(ctl, AGNX_GCR_THCD, 0x0);
-
-	agnx_write32(ctl, 0x11018, 0xb);
-	agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x0);
-
-	/* Write Frequency to Gain Control Channel */
-	agnx_write32(ctl, AGNX_GCR_RXCHANEL, freq);
-	/* Write 0x140000/Freq to 0x9c08 */
-	reg = 0x140000/freq;
-	agnx_write32(ctl, 0x9c08, reg);
-
-	reg = agnx_read32(ctl, AGNX_PM_SOFTRST);
-	reg &= ~0x80100030;
-	agnx_write32(ctl, AGNX_PM_SOFTRST, reg);
-
-	reg = agnx_read32(ctl, AGNX_PM_PLLCTL);
-	reg &= ~0x20009;
-	reg |= 0x1;
-	agnx_write32(ctl, AGNX_PM_PLLCTL, reg);
-
-	agnx_write32(ctl, AGNX_ACI_MODE, 0x0);
-
-/* FIXME According to Number of Chains: */
-
-/* 			   1. 1: */
-/*          1. Write 0x1203 to RF Chip 0 */
-/*          2. Write 0x1200 to RF Chips 1 +2  */
-/* 			   2. 2: */
-/*          1. Write 0x1203 to RF Chip 0 */
-/*          2. Write 0x1200 to RF Chip 2 */
-/*          3. Write 0x1201 to RF Chip 1  */
-/* 			   3. 3: */
-/*          1. Write 0x1203 to RF Chip 0 */
-/*          2. Write 0x1201 to RF Chip 1 + 2  */
-/* 			   4. 4: */
-/*          1. Write 0x1203 to RF Chip 0 + 1 */
-/*          2. Write 0x1200 to RF Chip 2  */
-
-/* 			   5. 6: */
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1203);
-	spi_rf_write(ctl, RF_CHIP2, 0x1201);
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1000);
-	agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-
-	/* FIXME Set the Disable Tx interrupt bit in Interrupt Mask
-	   (Or 0x20000 to Interrupt Mask) */
-/* 	reg = agnx_read32(ctl, AGNX_INT_MASK); */
-/* 	reg |= IRQ_TX_DISABLE; */
-/* 	agnx_write32(ctl, AGNX_INT_MASK, reg); */
-
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-
-	/* Configure the Antenna */
-	antenna_config(priv);
-
-	/* Write 0x0 to Discovery Mode Enable detect G, B, A packet? */
-	agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0);
-
-	reg = agnx_read32(ctl, AGNX_RXM_REQRATE);
-	reg |= 0x80000000;
-	agnx_write32(ctl, AGNX_RXM_REQRATE, reg);
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-
-	/* enable radio on and the power LED */
-	reg = agnx_read32(ctl, AGNX_SYSITF_GPIOUT);
-	reg &= ~0x1;
-	reg |= 0x2;
-	agnx_write32(ctl, AGNX_SYSITF_GPIOUT, reg);
-
-	reg = agnx_read32(ctl, AGNX_TXM_CTL);
-	reg |= 0x1;
-	agnx_write32(ctl, AGNX_TXM_CTL, reg);
-} /* radio_channel_set */
-
-static void base_band_filter_calibrate(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1700);
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1001);
-	agnx_write32(ctl, AGNX_GCR_FORCECTLCLK, 0x0);
-	spi_rc_write(ctl, RF_CHIP0, 0x27);
-	spi_rc_write(ctl, RF_CHIP1, 0x27);
-	spi_rc_write(ctl, RF_CHIP2, 0x27);
-	agnx_write32(ctl, AGNX_GCR_FORCECTLCLK, 0x1);
-}
-
-static void print_offset(struct agnx_priv *priv, u32 chain)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 offset;
-
-	iowrite32((chain), ctl + AGNX_ACI_SELCHAIN);
-	udelay(10);
-	offset = (ioread32(ctl + AGNX_ACI_OFFSET));
-	printk(PFX "Chain is 0x%x, Offset is 0x%x\n", chain, offset);
-}
-
-void print_offsets(struct agnx_priv *priv)
-{
-	print_offset(priv, 0);
-	print_offset(priv, 4);
-	print_offset(priv, 1);
-	print_offset(priv, 5);
-	print_offset(priv, 2);
-	print_offset(priv, 6);
-}
-
-
-struct chains {
-	u32 cali;		/* calibrate  value*/
-
-#define  NEED_CALIBRATE		0
-#define  SUCCESS_CALIBRATE	1
-	int status;
-};
-
-static void chain_calibrate(struct agnx_priv *priv, struct chains *chains,
-			    unsigned int num)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 calibra = chains[num].cali;
-
-	if (num < 3)
-		calibra |= 0x1400;
-	else
-		calibra |= 0x1500;
-
-	switch (num) {
-	case 0:
-	case 4:
-		spi_rf_write(ctl, RF_CHIP0, calibra);
-		break;
-	case 1:
-	case 5:
-		spi_rf_write(ctl, RF_CHIP1, calibra);
-		break;
-	case 2:
-	case 6:
-		spi_rf_write(ctl, RF_CHIP2, calibra);
-		break;
-	default:
-		BUG();
-	}
-} /* chain_calibrate */
-
-static inline void get_calibrete_value(struct agnx_priv *priv, struct chains *chains,
-				       unsigned int num)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 offset;
-
-	iowrite32((num), ctl + AGNX_ACI_SELCHAIN);
-	/* FIXME */
-	udelay(10);
-	offset = (ioread32(ctl + AGNX_ACI_OFFSET));
-
-	if (offset < 0xf) {
-		chains[num].status = SUCCESS_CALIBRATE;
-		return;
-	}
-
-	if (num == 0 || num == 1 || num == 2) {
-		if (0 == chains[num].cali)
-			chains[num].cali = 0xff;
-		else
-			chains[num].cali--;
-	} else
-		chains[num].cali++;
-
-	chains[num].status = NEED_CALIBRATE;
-}
-
-static inline void calibra_delay(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	unsigned int i = 100;
-
-	wmb();
-	while (--i) {
-		reg = (ioread32(ctl + AGNX_ACI_STATUS));
-		if (reg == 0x4000)
-			break;
-		udelay(10);
-	}
-	if (!i)
-		printk(PFX "calibration failed\n");
-}
-
-void do_calibration(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	struct chains chains[7];
-	unsigned int i, j;
-	AGNX_TRACE;
-
-	for (i = 0; i < 7; i++) {
-		if (i == 3)
-			continue;
-
-		chains[i].cali = 0x7f;
-		chains[i].status = NEED_CALIBRATE;
-	}
-
-	/* FIXME 0x300 is a magic number */
-	for (j = 0; j < 0x300; j++) {
-		if (chains[0].status == SUCCESS_CALIBRATE &&
-		    chains[1].status == SUCCESS_CALIBRATE &&
-		    chains[2].status == SUCCESS_CALIBRATE &&
-		    chains[4].status == SUCCESS_CALIBRATE &&
-		    chains[5].status == SUCCESS_CALIBRATE &&
-		    chains[6].status == SUCCESS_CALIBRATE)
-			break;
-
-		/* Attention, there is no chain 3 */
-		for (i = 0; i < 7; i++) {
-			if (i == 3)
-				continue;
-			if (chains[i].status == NEED_CALIBRATE)
-				chain_calibrate(priv, chains, i);
-		}
-		/* Write 0x1 to Calibration Measure */
-		iowrite32((0x1), ctl + AGNX_ACI_MEASURE);
-		calibra_delay(priv);
-
-		for (i = 0; i < 7; i++) {
-			if (i == 3)
-				continue;
-
-			get_calibrete_value(priv, chains, i);
-		}
-	}
-	printk(PFX "Clibrate times is %d\n", j);
-	print_offsets(priv);
-} /* do_calibration */
-
-void antenna_calibrate(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-	AGNX_TRACE;
-
-	agnx_write32(ctl, AGNX_GCR_NLISTANT, 0x3);
-	agnx_write32(ctl, AGNX_GCR_NMEASANT, 0x3);
-	agnx_write32(ctl, AGNX_GCR_NACTIANT, 0x3);
-	agnx_write32(ctl, AGNX_GCR_NCAPTANT, 0x3);
-
-	agnx_write32(ctl, AGNX_GCR_ANTCFG, 0x1f);
-	agnx_write32(ctl, AGNX_GCR_BOACT, 0x24);
-	agnx_write32(ctl, AGNX_GCR_BOINACT, 0x24);
-	agnx_write32(ctl, AGNX_GCR_BODYNA, 0x20);
-	agnx_write32(ctl, AGNX_GCR_THD0A, 0x64);
-	agnx_write32(ctl, AGNX_GCR_THD0AL, 0x64);
-	agnx_write32(ctl, AGNX_GCR_THD0B, 0x46);
-	agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 0x3c);
-	agnx_write32(ctl, AGNX_GCR_SIGHTH, 0x64);
-	agnx_write32(ctl, AGNX_GCR_SIGLTH, 0x30);
-
-	spi_rc_write(ctl, RF_CHIP0, 0x20);
-	/* Fixme */
-	udelay(80);
-	/*    1. Should read 0x0  */
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-	if (0x0 != reg)
-		printk(KERN_WARNING PFX "Unmatched rf chips result\n");
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1000);
-
-	agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-
-	spi_rc_write(ctl, RF_CHIP0, 0x22);
-	udelay(80);
-	reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-	if (0x0 != reg)
-		printk(KERN_WARNING PFX "Unmatched rf chips result\n");
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1005);
-
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
-	agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-
-	reg = agnx_read32(ctl, AGNX_PM_SOFTRST);
-	reg |= 0x1c000032;
-	agnx_write32(ctl, AGNX_PM_SOFTRST, reg);
-	reg = agnx_read32(ctl, AGNX_PM_PLLCTL);
-	reg |= 0x0003f07;
-	agnx_write32(ctl, AGNX_PM_PLLCTL, reg);
-
-	reg = agnx_read32(ctl, 0xec50);
-	reg |= 0x40;
-	agnx_write32(ctl, 0xec50, reg);
-
-	agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0xff8);
-	agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
-
-	agnx_write32(ctl, AGNX_GCR_CHAINNUM, 0x6);
-	agnx_write32(ctl, 0x19874, 0x0);
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1700);
-
-	/* Calibrate the BaseBandFilter */
-	base_band_filter_calibrate(priv);
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1002);
-
-	agnx_write32(ctl, AGNX_GCR_GAINSET0, 0x1d);
-	agnx_write32(ctl, AGNX_GCR_GAINSET1, 0x1d);
-	agnx_write32(ctl, AGNX_GCR_GAINSET2, 0x1d);
-	agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 0x1);
-
-	agnx_write32(ctl, AGNX_ACI_MODE, 0x1);
-	agnx_write32(ctl, AGNX_ACI_LEN, 0x3ff);
-
-	agnx_write32(ctl, AGNX_ACI_TIMER1, 0x27);
-	agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
-
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1400);
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1500);
-
-	/* Measure Calibration */
-	agnx_write32(ctl, AGNX_ACI_MEASURE, 0x1);
-	calibra_delay(priv);
-
-	/* do calibration */
-	do_calibration(priv);
-
-	agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-	agnx_write32(ctl, AGNX_ACI_TIMER1, 0x21);
-	agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
-	agnx_write32(ctl, AGNX_ACI_LEN, 0xf);
-
-	reg = agnx_read32(ctl, AGNX_GCR_GAINSET0);
-	reg &= 0xf;
-	agnx_write32(ctl, AGNX_GCR_GAINSET0, reg);
-	reg = agnx_read32(ctl, AGNX_GCR_GAINSET1);
-	reg &= 0xf;
-	agnx_write32(ctl, AGNX_GCR_GAINSET1, reg);
-	reg = agnx_read32(ctl, AGNX_GCR_GAINSET2);
-	reg &= 0xf;
-	agnx_write32(ctl, AGNX_GCR_GAINSET2, reg);
-
-	agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 0x0);
-	disable_receiver(priv);
-} /* antenna_calibrate */
-
-void __antenna_calibrate(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-
-	/* Calibrate the BaseBandFilter */
-	/* base_band_filter_calibrate(priv); */
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1002);
-
-
-	agnx_write32(ctl, AGNX_GCR_GAINSET0, 0x1d);
-	agnx_write32(ctl, AGNX_GCR_GAINSET1, 0x1d);
-	agnx_write32(ctl, AGNX_GCR_GAINSET2, 0x1d);
-
-	agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 0x1);
-
-	agnx_write32(ctl, AGNX_ACI_MODE, 0x1);
-	agnx_write32(ctl, AGNX_ACI_LEN, 0x3ff);
-
-
-	agnx_write32(ctl, AGNX_ACI_TIMER1, 0x27);
-	agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1400);
-	spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1500);
-	/* Measure Calibration */
-	agnx_write32(ctl, AGNX_ACI_MEASURE, 0x1);
-	calibra_delay(priv);
-	do_calibration(priv);
-	agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-
-	agnx_write32(ctl, AGNX_ACI_TIMER1, 0x21);
-	agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
-
-	agnx_write32(ctl, AGNX_ACI_LEN, 0xf);
-
-	reg = agnx_read32(ctl, AGNX_GCR_GAINSET0);
-	reg &= 0xf;
-	agnx_write32(ctl, AGNX_GCR_GAINSET0, reg);
-	reg = agnx_read32(ctl, AGNX_GCR_GAINSET1);
-	reg &= 0xf;
-	agnx_write32(ctl, AGNX_GCR_GAINSET1, reg);
-	reg = agnx_read32(ctl, AGNX_GCR_GAINSET2);
-	reg &= 0xf;
-	agnx_write32(ctl, AGNX_GCR_GAINSET2, reg);
-
-
-	agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 0x0);
-
-	/* Write 0x3 Gain Control Discovery Mode */
-	enable_receiver(priv);
-}
-
-int agnx_set_channel(struct agnx_priv *priv, unsigned int channel)
-{
-	AGNX_TRACE;
-
-	printk(KERN_ERR PFX "Channel is %d %s\n", channel, __func__);
-	radio_channel_set(priv, channel);
-	return 0;
-}
diff --git a/drivers/staging/agnx/sta.c b/drivers/staging/agnx/sta.c
deleted file mode 100644
index 3e7db5e2811a..000000000000
--- a/drivers/staging/agnx/sta.c
+++ /dev/null
@@ -1,218 +0,0 @@
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include "phy.h"
-#include "sta.h"
-#include "debug.h"
-
-void hash_read(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id)
-{
-	void __iomem *ctl = priv->ctl;
-
-	reglo &= 0xFFFF;
-	reglo |= 0x30000000;
-	reglo |= 0x40000000;	/* Set status busy */
-	reglo |= sta_id << 16;
-
-	iowrite32(0, ctl + AGNX_RXM_HASH_CMD_FLAG);
-	iowrite32(reghi, ctl + AGNX_RXM_HASH_CMD_HIGH);
-	iowrite32(reglo, ctl + AGNX_RXM_HASH_CMD_LOW);
-
-	reghi = ioread32(ctl + AGNX_RXM_HASH_CMD_HIGH);
-	reglo = ioread32(ctl + AGNX_RXM_HASH_CMD_LOW);
-	printk(PFX "RX hash cmd are : %.8x%.8x\n", reghi, reglo);
-}
-
-void hash_write(struct agnx_priv *priv, const u8 *mac_addr, u8 sta_id)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reghi, reglo;
-
-	if (!is_valid_ether_addr(mac_addr))
-		printk(KERN_WARNING PFX "Update hash table: Invalid hwaddr!\n");
-
-	reghi = mac_addr[0] << 24 | mac_addr[1] << 16 | mac_addr[2] << 8 | mac_addr[3];
-	reglo = mac_addr[4] << 8 | mac_addr[5];
-	reglo |= 0x10000000;	/* Set hash commmand */
-	reglo |= 0x40000000;	/* Set status busy */
-	reglo |= sta_id << 16;
-
-	iowrite32(0, ctl + AGNX_RXM_HASH_CMD_FLAG);
-	iowrite32(reghi, ctl + AGNX_RXM_HASH_CMD_HIGH);
-	iowrite32(reglo, ctl + AGNX_RXM_HASH_CMD_LOW);
-
-	reglo = ioread32(ctl + AGNX_RXM_HASH_CMD_LOW);
-	if (!(reglo & 0x80000000))
-		printk(KERN_WARNING PFX "Update hash table failed\n");
-}
-
-void hash_delete(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id)
-{
-	void __iomem *ctl = priv->ctl;
-
-	reglo &= 0xFFFF;
-	reglo |= 0x20000000;
-	reglo |= 0x40000000;	/* Set status busy */
-	reglo |= sta_id << 16;
-
-	iowrite32(0, ctl + AGNX_RXM_HASH_CMD_FLAG);
-	iowrite32(reghi, ctl + AGNX_RXM_HASH_CMD_HIGH);
-	iowrite32(reglo, ctl + AGNX_RXM_HASH_CMD_LOW);
-	reghi = ioread32(ctl + AGNX_RXM_HASH_CMD_HIGH);
-
-	reglo = ioread32(ctl + AGNX_RXM_HASH_CMD_LOW);
-	printk(PFX "RX hash cmd are : %.8x%.8x\n", reghi, reglo);
-
-}
-
-void hash_dump(struct agnx_priv *priv, u8 sta_id)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reghi, reglo;
-
-	reglo = 0x40000000;  	/* status bit */
-	iowrite32(reglo, ctl + AGNX_RXM_HASH_CMD_LOW);
-	iowrite32(sta_id << 16, ctl + AGNX_RXM_HASH_DUMP_DATA);
-
-	udelay(80);
-
-	reghi = ioread32(ctl + AGNX_RXM_HASH_CMD_HIGH);
-	reglo = ioread32(ctl + AGNX_RXM_HASH_CMD_LOW);
-	printk(PFX "hash cmd are : %.8x%.8x\n", reghi, reglo);
-	reghi = ioread32(ctl + AGNX_RXM_HASH_CMD_FLAG);
-	printk(PFX "hash flag is : %.8x\n", reghi);
-	reghi = ioread32(ctl + AGNX_RXM_HASH_DUMP_MST);
-	reglo = ioread32(ctl + AGNX_RXM_HASH_DUMP_LST);
-	printk(PFX "hash dump mst lst: %.8x%.8x\n", reghi, reglo);
-	reghi = ioread32(ctl + AGNX_RXM_HASH_DUMP_DATA);
-	printk(PFX "hash dump data: %.8x\n", reghi);
-}
-
-void get_sta_power(struct agnx_priv *priv, struct agnx_sta_power *power, unsigned int sta_idx)
-{
-	void __iomem *ctl = priv->ctl;
-	memcpy_fromio(power, ctl + AGNX_TXM_STAPOWTEMP + sizeof(*power) * sta_idx,
-		      sizeof(*power));
-}
-
-inline void
-set_sta_power(struct agnx_priv *priv, struct agnx_sta_power *power, unsigned int sta_idx)
-{
-	void __iomem *ctl = priv->ctl;
-	/* FIXME   2. Write Template to offset + station number  */
-	memcpy_toio(ctl + AGNX_TXM_STAPOWTEMP + sizeof(*power) * sta_idx,
-		    power, sizeof(*power));
-}
-
-
-void get_sta_tx_wq(struct agnx_priv *priv, struct agnx_sta_tx_wq *tx_wq,
-		   unsigned int sta_idx, unsigned int wq_idx)
-{
-	void __iomem *data = priv->data;
-	memcpy_fromio(tx_wq, data + AGNX_PDU_TX_WQ + sizeof(*tx_wq) * STA_TX_WQ_NUM * sta_idx +
-		      sizeof(*tx_wq) * wq_idx,  sizeof(*tx_wq));
-
-}
-
-inline void set_sta_tx_wq(struct agnx_priv *priv, struct agnx_sta_tx_wq *tx_wq,
-		   unsigned int sta_idx, unsigned int wq_idx)
-{
-	void __iomem *data = priv->data;
-	memcpy_toio(data + AGNX_PDU_TX_WQ + sizeof(*tx_wq) * STA_TX_WQ_NUM * sta_idx +
-		    sizeof(*tx_wq) * wq_idx, tx_wq, sizeof(*tx_wq));
-}
-
-
-void get_sta(struct agnx_priv *priv, struct agnx_sta *sta, unsigned int sta_idx)
-{
-	void __iomem *data = priv->data;
-
-	memcpy_fromio(sta, data + AGNX_PDUPOOL + sizeof(*sta) * sta_idx,
-		      sizeof(*sta));
-}
-
-inline void set_sta(struct agnx_priv *priv, struct agnx_sta *sta, unsigned int sta_idx)
-{
-	void __iomem *data = priv->data;
-
-	memcpy_toio(data + AGNX_PDUPOOL + sizeof(*sta) * sta_idx,
-		    sta, sizeof(*sta));
-}
-
-/* FIXME */
-void sta_power_init(struct agnx_priv *priv, unsigned int sta_idx)
-{
-	struct agnx_sta_power power;
-	u32 reg;
-	AGNX_TRACE;
-
-	memset(&power, 0, sizeof(power));
-	reg = agnx_set_bits(EDCF, EDCF_SHIFT, 0x1);
-	power.reg = cpu_to_le32(reg);
-	set_sta_power(priv, &power, sta_idx);
-	udelay(40);
-} /* add_power_template */
-
-
-/* @num: The #number of station that is visible to the card */
-static void sta_tx_workqueue_init(struct agnx_priv *priv, unsigned int sta_idx)
-{
-	struct agnx_sta_tx_wq tx_wq;
-	u32 reg;
-	unsigned int i;
-
-	memset(&tx_wq, 0, sizeof(tx_wq));
-
-	reg = agnx_set_bits(WORK_QUEUE_VALID, WORK_QUEUE_VALID_SHIFT, 1);
-	reg |= agnx_set_bits(WORK_QUEUE_ACK_TYPE, WORK_QUEUE_ACK_TYPE_SHIFT, 1);
-/*	reg |= agnx_set_bits(WORK_QUEUE_ACK_TYPE, WORK_QUEUE_ACK_TYPE_SHIFT, 0); */
-	tx_wq.reg2 |= cpu_to_le32(reg);
-
-	/* Suppose all 8 traffic class are used */
-	for (i = 0; i < STA_TX_WQ_NUM; i++)
-		set_sta_tx_wq(priv, &tx_wq, sta_idx, i);
-} /* sta_tx_workqueue_init */
-
-
-static void sta_traffic_init(struct agnx_sta_traffic *traffic)
-{
-	u32 reg;
-	memset(traffic, 0, sizeof(*traffic));
-
-	reg = agnx_set_bits(NEW_PACKET, NEW_PACKET_SHIFT, 1);
-	reg |= agnx_set_bits(TRAFFIC_VALID, TRAFFIC_VALID_SHIFT, 1);
-/*	reg |= agnx_set_bits(TRAFFIC_ACK_TYPE, TRAFFIC_ACK_TYPE_SHIFT, 1); */
-	traffic->reg0 = cpu_to_le32(reg);
-
-	/* 	3. setting RX Sequence Number to 4095 */
-	reg = agnx_set_bits(RX_SEQUENCE_NUM, RX_SEQUENCE_NUM_SHIFT, 4095);
-	traffic->reg1 = cpu_to_le32(reg);
-}
-
-
-/* @num: The #number of station that is visible to the card */
-void sta_init(struct agnx_priv *priv, unsigned int sta_idx)
-{
-	/* FIXME the length of sta is 256 bytes Is that
-	 * dangerous to stack overflow? */
-	struct agnx_sta sta;
-	u32 reg;
-	int i;
-
-	memset(&sta, 0, sizeof(sta));
-	/* Set valid to 1 */
-	reg = agnx_set_bits(STATION_VALID, STATION_VALID_SHIFT, 1);
-	/* Set Enable Concatenation to 0 (?) */
-	reg |= agnx_set_bits(ENABLE_CONCATENATION, ENABLE_CONCATENATION_SHIFT, 0);
-	/* Set Enable Decompression to 0 (?) */
-	reg |= agnx_set_bits(ENABLE_DECOMPRESSION, ENABLE_DECOMPRESSION_SHIFT, 0);
-	sta.reg = cpu_to_le32(reg);
-
-	/* Initialize each of the Traffic Class Structures by: */
-	for (i = 0; i < 8; i++)
-		sta_traffic_init(sta.traffic + i);
-
-	set_sta(priv, &sta, sta_idx);
-	sta_tx_workqueue_init(priv, sta_idx);
-} /* sta_descriptor_init */
-
-
diff --git a/drivers/staging/agnx/sta.h b/drivers/staging/agnx/sta.h
deleted file mode 100644
index fd504e3f3870..000000000000
--- a/drivers/staging/agnx/sta.h
+++ /dev/null
@@ -1,222 +0,0 @@
-#ifndef AGNX_STA_H_
-#define AGNX_STA_H_
-
-#define STA_TX_WQ_NUM	8	/* The number of TX workqueue one STA has */
-
-struct agnx_hash_cmd {
-	__be32 cmdhi;
-#define MACLO		0xFFFF0000
-#define MACLO_SHIFT	16
-#define STA_ID		0x0000FFF0
-#define STA_ID_SHIFT	4
-#define CMD		0x0000000C
-#define CMD_SHIFT	2
-#define STATUS		0x00000002
-#define STATUS_SHIFT	1
-#define PASS		0x00000001
-#define PASS_SHIFT	1
-	__be32 cmdlo;
-} __attribute__((__packed__));
-
-
-/*
- * Station Power Template
- * FIXME Just for agn100 yet
- */
-struct agnx_sta_power {
-	__le32 reg;
-#define SIGNAL			0x000000FF /* signal */
-#define SIGNAL_SHIFT		0
-#define RATE			0x00000F00
-#define RATE_SHIFT		8
-#define TIFS			0x00001000
-#define TIFS_SHIFT		12
-#define EDCF			0x00002000
-#define EDCF_SHIFT		13
-#define CHANNEL_BOND		0x00004000
-#define CHANNEL_BOND_SHIFT	14
-#define PHY_MODE		0x00038000
-#define PHY_MODE_SHIFT		15
-#define POWER_LEVEL		0x007C0000
-#define POWER_LEVEL_SHIFT	18
-#define NUM_TRANSMITTERS	0x00800000
-#define NUM_TRANSMITTERS_SHIFT	23
-} __attribute__((__packed__));
-
-/*
- * TX Workqueue Descriptor
- */
-struct agnx_sta_tx_wq {
-	__le32 reg0;
-#define HEAD_POINTER_LOW	0xFF000000 /* Head pointer low */
-#define HEAD_POINTER_LOW_SHIFT	24
-#define TAIL_POINTER		0x00FFFFFF /* Tail pointer */
-#define TAIL_POINTER_SHIFT	0
-
-	__le32 reg3;
-#define ACK_POINTER_LOW	        0xFFFF0000	/* ACK pointer low */
-#define ACK_POINTER_LOW_SHIFT	16
-#define HEAD_POINTER_HIGH	0x0000FFFF	/* Head pointer high */
-#define HEAD_POINTER_HIGH_SHIFT	0
-
-	__le32 reg1;
-/* ACK timeout tail packet count */
-#define ACK_TIMOUT_TAIL_PACK_CNT	0xFFF00000
-#define ACK_TIMOUT_TAIL_PACK_CNT_SHIFT	20
-/* Head timeout tail packet count */
-#define HEAD_TIMOUT_TAIL_PACK_CNT	0x000FFF00
-#define HEAD_TIMOUT_TAIL_PACK_CNT_SHIFT	8
-#define ACK_POINTER_HIGH	        0x000000FF /* ACK pointer high */
-#define ACK_POINTER_HIGH_SHIFT		0
-
-	__le32 reg2;
-#define WORK_QUEUE_VALID		0x80000000 /* valid */
-#define WORK_QUEUE_VALID_SHIFT		31
-#define WORK_QUEUE_ACK_TYPE		0x40000000 /* ACK type */
-#define WORK_QUEUE_ACK_TYPE_SHIFT	30
-/* Head timeout window limit fragmentation count */
-#define HEAD_TIMOUT_WIN_LIM_FRAG_CNT	0x3FFF0000
-#define HEAD_TIMOUT_WIN_LIM_FRAG_CNT_SHIFT	16
-/* Head timeout window limit byte count */
-#define HEAD_TIMOUT_WIN_LIM_BYTE_CNT	0x0000FFFF
-#define HEAD_TIMOUT_WIN_LIM_BYTE_CNT_SHIFT	 0
-} __attribute__((__packed__));
-
-
-/*
- * Traffic Class Structure
- */
-struct agnx_sta_traffic {
-	__le32 reg0;
-#define ACK_TIMOUT_CNT		0xFF800000 /* ACK Timeout Counts */
-#define ACK_TIMOUT_CNT_SHIFT	23
-#define TRAFFIC_ACK_TYPE	0x00600000 /* ACK Type */
-#define TRAFFIC_ACK_TYPE_SHIFT	21
-#define NEW_PACKET		0x00100000 /* New Packet  */
-#define NEW_PACKET_SHIFT	20
-#define TRAFFIC_VALID		0x00080000 /* Valid */
-#define TRAFFIC_VALID_SHIFT	19
-#define RX_HDR_DESC_POINTER	0x0007FFFF /* RX Header Descripter pointer */
-#define RX_HDR_DESC_POINTER_SHIFT	 0
-
-	__le32 reg1;
-#define RX_PACKET_TIMESTAMP	0xFFFF0000 /* RX Packet Timestamp */
-#define RX_PACKET_TIMESTAMP_SHIFT	16
-#define TRAFFIC_RESERVED	0x0000E000 /* Reserved */
-#define TRAFFIC_RESERVED_SHIFT  13
-#define SV			0x00001000 /* sv */
-#define SV_SHIFT		12
-#define RX_SEQUENCE_NUM		0x00000FFF /* RX Sequence Number */
-#define RX_SEQUENCE_NUM_SHIFT	0
-
-	__le32 tx_replay_cnt_low; /* TX Replay Counter Low */
-
-	__le16 tx_replay_cnt_high; /* TX Replay Counter High */
-	__le16 rx_replay_cnt_high; /* RX Replay Counter High */
-
-	__be32 rx_replay_cnt_low; /* RX Replay Counter Low */
-} __attribute__((__packed__));
-
-/*
- * Station Descriptors
- */
-struct agnx_sta {
-	__le32 tx_session_keys[4]; /* Transmit Session Key (0-3) */
-	__le32 rx_session_keys[4]; /* Receive Session Key (0-3) */
-
-	__le32 reg;
-#define ID_1			0xC0000000 /* id 1 */
-#define ID_1_SHIFT		30
-#define ID_0			0x30000000 /* id 0 */
-#define ID_0_SHIFT		28
-#define ENABLE_CONCATENATION	0x0FF00000 /* Enable concatenation */
-#define ENABLE_CONCATENATION_SHIFT	20
-#define ENABLE_DECOMPRESSION	0x000FF000 /* Enable decompression */
-#define ENABLE_DECOMPRESSION_SHIFT	12
-#define STA_RESERVED		0x00000C00 /* Reserved */
-#define STA_RESERVED_SHIFT	10
-#define EAP			0x00000200 /* EAP */
-#define EAP_SHIFT		9
-#define ED_NULL			0x00000100 /* ED NULL */
-#define ED_NULL_SHIFT		8
-#define ENCRYPTION_POLICY	0x000000E0 /* Encryption Policy */
-#define ENCRYPTION_POLICY_SHIFT 5
-#define DEFINED_KEY_ID		0x00000018 /* Defined Key ID */
-#define DEFINED_KEY_ID_SHIFT	3
-#define FIXED_KEY		0x00000004 /* Fixed Key */
-#define FIXED_KEY_SHIFT		2
-#define KEY_VALID		0x00000002 /* Key Valid */
-#define KEY_VALID_SHIFT		1
-#define STATION_VALID		0x00000001 /* Station Valid */
-#define STATION_VALID_SHIFT	0
-
-	__le32 tx_aes_blks_unicast; /* TX AES Blks Unicast */
-	__le32 rx_aes_blks_unicast; /* RX AES Blks Unicast */
-
-	__le16 aes_format_err_unicast_cnt; /* AES Format Error Unicast Counts */
-	__le16 aes_replay_unicast; /* AES Replay Unicast */
-
-	__le16 aes_decrypt_err_unicast;	/* AES Decrypt Error Unicast */
-	__le16 aes_decrypt_err_default;	/* AES Decrypt Error default */
-
-	__le16 single_retry_packets; /* Single Retry Packets */
-	__le16 failed_tx_packets; /* Failed Tx Packets */
-
-	__le16 muti_retry_packets; /* Multiple Retry Packets */
-	__le16 ack_timeouts;	/* ACK Timeouts */
-
-	__le16 frag_tx_cnt;	/* Fragment TX Counts */
-	__le16 rts_brq_sent;	/* RTS Brq Sent */
-
-	__le16 tx_packets;	/* TX Packets */
-	__le16 cts_back_timeout; /* CTS Back Timeout */
-
-	__le32 phy_stats_high;	/* PHY Stats High */
-	__le32 phy_stats_low;	/* PHY Stats Low */
-
-	struct agnx_sta_traffic traffic[8];	/* Traffic Class Structure (8) */
-
-	__le16 traffic_class0_frag_success; /* Traffic Class 0 Fragment Success */
-	__le16 traffic_class1_frag_success; /* Traffic Class 1 Fragment Success */
-	__le16 traffic_class2_frag_success; /* Traffic Class 2 Fragment Success */
-	__le16 traffic_class3_frag_success; /* Traffic Class 3 Fragment Success */
-	__le16 traffic_class4_frag_success; /* Traffic Class 4 Fragment Success */
-	__le16 traffic_class5_frag_success; /* Traffic Class 5 Fragment Success */
-	__le16 traffic_class6_frag_success; /* Traffic Class 6 Fragment Success */
-	__le16 traffic_class7_frag_success; /* Traffic Class 7 Fragment Success */
-
-	__le16 num_frag_non_prime_rates; /* number of Fragments for non-prime rates */
-	__le16 ack_timeout_non_prime_rates; /* ACK Timeout for non-prime rates */
-
-} __attribute__((__packed__));
-
-
-struct agnx_beacon_hdr {
-	struct agnx_sta_power power; /* Tx Station Power Template  */
-	u8 phy_hdr[6];		/* PHY Hdr */
-	u8 frame_len_lo;	/* Frame Length Lo */
-	u8 frame_len_hi;	/* Frame Length Hi */
-	u8 mac_hdr[24];		/* MAC Header */
-	/* FIXME */
-	/* 802.11(abg) beacon */
-} __attribute__((__packed__));
-
-void hash_write(struct agnx_priv *priv, const u8 *mac_addr, u8 sta_id);
-void hash_dump(struct agnx_priv *priv, u8 sta_id);
-void hash_read(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id);
-void hash_delete(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id);
-
-void get_sta_power(struct agnx_priv *priv, struct agnx_sta_power *power, unsigned int sta_idx);
-void set_sta_power(struct agnx_priv *priv, struct agnx_sta_power *power,
-		   unsigned int sta_idx);
-void get_sta_tx_wq(struct agnx_priv *priv, struct agnx_sta_tx_wq *tx_wq,
-		   unsigned int sta_idx, unsigned int wq_idx);
-void set_sta_tx_wq(struct agnx_priv *priv, struct agnx_sta_tx_wq *tx_wq,
-		   unsigned int sta_idx, unsigned int wq_idx);
-void get_sta(struct agnx_priv *priv, struct agnx_sta *sta, unsigned int sta_idx);
-void set_sta(struct agnx_priv *priv, struct agnx_sta *sta, unsigned int sta_idx);
-
-void sta_power_init(struct agnx_priv *priv, unsigned int num);
-void sta_init(struct agnx_priv *priv, unsigned int num);
-
-#endif /* AGNX_STA_H_ */
diff --git a/drivers/staging/agnx/table.c b/drivers/staging/agnx/table.c
deleted file mode 100644
index b52fef9db0e3..000000000000
--- a/drivers/staging/agnx/table.c
+++ /dev/null
@@ -1,168 +0,0 @@
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include "agnx.h"
-#include "debug.h"
-#include "phy.h"
-
-static const u32
-tx_fir_table[] = { 0x19, 0x5d, 0xce, 0x151, 0x1c3, 0x1ff, 0x1ea, 0x17c, 0xcf,
-		   0x19, 0x38e, 0x350, 0x362, 0x3ad, 0x5, 0x44, 0x59, 0x49,
-		   0x21, 0x3f7, 0x3e0, 0x3e3, 0x3f3, 0x0 };
-
-void tx_fir_table_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(tx_fir_table); i++)
-		iowrite32(tx_fir_table[i], ctl + AGNX_FIR_BASE + i*4);
-} /* fir_table_setup */
-
-
-static const u32
-gain_table[] = { 0x8, 0x8, 0xf, 0x13, 0x17, 0x1b, 0x1f, 0x23, 0x27, 0x2b,
-		 0x2f, 0x33, 0x37, 0x3b, 0x3f, 0x43, 0x47, 0x4b, 0x4f,
-		 0x53, 0x57, 0x5b, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f,
-		 0x5f, 0x5f, 0x5f, 0x5f };
-
-void gain_table_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(gain_table); i++) {
-		iowrite32(gain_table[i], ctl + AGNX_GAIN_TABLE + i*4);
-		iowrite32(gain_table[i], ctl + AGNX_GAIN_TABLE + i*4 + 0x80);
-	}
-} /* gain_table_init */
-
-void monitor_gain_table_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	unsigned int i;
-
-	for (i = 0; i < 0x44; i += 4) {
-		iowrite32(0x61, ctl + AGNX_MONGCR_BASE + i);
-		iowrite32(0x61, ctl + AGNX_MONGCR_BASE + 0x200 + i);
-	}
-	for (i = 0x44; i < 0x64; i += 4) {
-		iowrite32(0x6e, ctl + AGNX_MONGCR_BASE + i);
-		iowrite32(0x6e, ctl + AGNX_MONGCR_BASE + 0x200 + i);
-	}
-	for (i = 0x64; i < 0x94; i += 4) {
-		iowrite32(0x7a, ctl + AGNX_MONGCR_BASE + i);
-		iowrite32(0x7a, ctl + AGNX_MONGCR_BASE + 0x200 + i);
-	}
-	for (i = 0x94; i < 0xdc; i += 4) {
-		iowrite32(0x87, ctl + AGNX_MONGCR_BASE + i);
-		iowrite32(0x87, ctl + AGNX_MONGCR_BASE + 0x200 + i);
-	}
-	for (i = 0xdc; i < 0x148; i += 4) {
-		iowrite32(0x95, ctl + AGNX_MONGCR_BASE + i);
-		iowrite32(0x95, ctl + AGNX_MONGCR_BASE + 0x200 + i);
-	}
-	for (i = 0x148; i < 0x1e8; i += 4) {
-		iowrite32(0xa2, ctl + AGNX_MONGCR_BASE + i);
-		iowrite32(0xa2, ctl + AGNX_MONGCR_BASE + 0x200 + i);
-	}
-	for (i = 0x1e8; i <= 0x1fc; i += 4) {
-		iowrite32(0xb0, ctl + AGNX_MONGCR_BASE + i);
-		iowrite32(0xb0, ctl + AGNX_MONGCR_BASE + 0x200 + i);
-	}
-} /* monitor_gain_table_init */
-
-
-void routing_table_init(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	unsigned int type, subtype;
-	u32 reg;
-
-	disable_receiver(priv);
-
-	for (type = 0; type < 0x3; type++) {
-		for (subtype = 0; subtype < 0x10; subtype++) {
-			/* 1. Set Routing table to R/W and to Return status on Read */
-			reg = (type << ROUTAB_TYPE_SHIFT) |
-				(subtype << ROUTAB_SUBTYPE_SHIFT);
-			reg |= (1 << ROUTAB_RW_SHIFT) | (1 << ROUTAB_STATUS_SHIFT);
-			if (type == ROUTAB_TYPE_DATA) {
-				/* NULL goes to RFP */
-				if (subtype == ROUTAB_SUBTYPE_NULL)
-/*					reg |= ROUTAB_ROUTE_RFP; */
-					reg |= ROUTAB_ROUTE_CPU;
-				/* QOS NULL goes to CPU */
-				else if (subtype == ROUTAB_SUBTYPE_QOSNULL)
-					reg |= ROUTAB_ROUTE_CPU;
-				/* All Data and QOS data subtypes go to Encryption */
-				else if ((subtype == ROUTAB_SUBTYPE_DATA) ||
-					 (subtype == ROUTAB_SUBTYPE_DATAACK) ||
-					 (subtype == ROUTAB_SUBTYPE_DATAPOLL) ||
-					 (subtype == ROUTAB_SUBTYPE_DATAPOLLACK) ||
-					 (subtype == ROUTAB_SUBTYPE_QOSDATA) ||
-					 (subtype == ROUTAB_SUBTYPE_QOSDATAACK) ||
-					 (subtype == ROUTAB_SUBTYPE_QOSDATAPOLL) ||
-					 (subtype == ROUTAB_SUBTYPE_QOSDATAACKPOLL))
-					reg |= ROUTAB_ROUTE_ENCRY;
-/*					reg |= ROUTAB_ROUTE_CPU; */
-				/*Drop NULL and QOS NULL ack, poll and poll ack*/
-				else if ((subtype == ROUTAB_SUBTYPE_NULLACK) ||
-					 (subtype == ROUTAB_SUBTYPE_QOSNULLACK) ||
-					 (subtype == ROUTAB_SUBTYPE_NULLPOLL) ||
-					 (subtype == ROUTAB_SUBTYPE_QOSNULLPOLL) ||
-					 (subtype == ROUTAB_SUBTYPE_NULLPOLLACK) ||
-					 (subtype == ROUTAB_SUBTYPE_QOSNULLPOLLACK))
-/*					reg |= ROUTAB_ROUTE_DROP; */
-					reg |= ROUTAB_ROUTE_CPU;
-			} else {
-				reg |= (ROUTAB_ROUTE_CPU);
-			}
-			iowrite32(reg, ctl + AGNX_RXM_ROUTAB);
-			/* Check to verify that the status bit cleared */
-			routing_table_delay();
-		}
-	}
-	enable_receiver(priv);
-} /* routing_table_init */
-
-void tx_engine_lookup_tbl_init(struct agnx_priv *priv)
-{
-	void __iomem *data = priv->data;
-	unsigned int i;
-
-	for (i = 0; i <= 28; i += 4)
-		iowrite32(0xb00c, data + AGNX_ENGINE_LOOKUP_TBL + i);
-	for (i = 32; i <= 120; i += 8) {
-		iowrite32(0x1e58, data + AGNX_ENGINE_LOOKUP_TBL + i);
-		iowrite32(0xb00c, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
-	}
-
-	for (i = 128; i <= 156; i += 4)
-		iowrite32(0x980c, data + AGNX_ENGINE_LOOKUP_TBL + i);
-	for (i = 160; i <= 248; i += 8) {
-		iowrite32(0x1858, data + AGNX_ENGINE_LOOKUP_TBL + i);
-		iowrite32(0x980c, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
-	}
-
-	for (i = 256; i <= 284; i += 4)
-		iowrite32(0x980c, data + AGNX_ENGINE_LOOKUP_TBL + i);
-	for (i = 288; i <= 376; i += 8) {
-		iowrite32(0x1a58, data + AGNX_ENGINE_LOOKUP_TBL + i);
-		iowrite32(0x1858, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
-	}
-
-	for (i = 512; i <= 540; i += 4)
-		iowrite32(0xc00c, data + AGNX_ENGINE_LOOKUP_TBL + i);
-	for (i = 544; i <= 632; i += 8) {
-		iowrite32(0x2058, data + AGNX_ENGINE_LOOKUP_TBL + i);
-		iowrite32(0xc00c, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
-	}
-
-	for (i = 640; i <= 668; i += 4)
-		iowrite32(0xc80c, data + AGNX_ENGINE_LOOKUP_TBL + i);
-	for (i = 672; i <= 764; i += 8) {
-		iowrite32(0x2258, data + AGNX_ENGINE_LOOKUP_TBL + i);
-		iowrite32(0xc80c, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
-	}
-}
-
diff --git a/drivers/staging/agnx/table.h b/drivers/staging/agnx/table.h
deleted file mode 100644
index f0626b5ee86b..000000000000
--- a/drivers/staging/agnx/table.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef AGNX_TABLE_H_
-#define AGNX_TABLE_H_
-
-void tx_fir_table_init(struct agnx_priv *priv);
-void gain_table_init(struct agnx_priv *priv);
-void monitor_gain_table_init(struct agnx_priv *priv);
-void routing_table_init(struct agnx_priv *priv);
-void tx_engine_lookup_tbl_init(struct agnx_priv *priv);
-
-#endif /* AGNX_TABLE_H_ */
diff --git a/drivers/staging/agnx/xmit.c b/drivers/staging/agnx/xmit.c
deleted file mode 100644
index 42db41070cf0..000000000000
--- a/drivers/staging/agnx/xmit.c
+++ /dev/null
@@ -1,836 +0,0 @@
-/**
- * Airgo MIMO wireless driver
- *
- * Copyright (c) 2007 Li YanBo <dreamfly281@gmail.com>
-
- * Thanks for Jeff Williams <angelbane@gmail.com> do reverse engineer
- * works and published the SPECS at http://airgo.wdwconsulting.net/mymoin
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include "agnx.h"
-#include "debug.h"
-#include "phy.h"
-
-unsigned int rx_frame_cnt;
-/* unsigned int local_tx_sent_cnt = 0; */
-
-static inline void disable_rx_engine(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	iowrite32(0x100, ctl + AGNX_CIR_RXCTL);
-	/* Wait for RX Control to have the Disable Rx Interrupt (0x100) set */
-	ioread32(ctl + AGNX_CIR_RXCTL);
-}
-
-static inline void enable_rx_engine(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	iowrite32(0x80, ctl + AGNX_CIR_RXCTL);
-	ioread32(ctl + AGNX_CIR_RXCTL);
-}
-
-inline void disable_rx_interrupt(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-
-	disable_rx_engine(priv);
-	reg = ioread32(ctl + AGNX_CIR_RXCFG);
-	reg &= ~0x20;
-	iowrite32(reg, ctl + AGNX_CIR_RXCFG);
-	ioread32(ctl + AGNX_CIR_RXCFG);
-}
-
-inline void enable_rx_interrupt(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-
-	reg = ioread32(ctl + AGNX_CIR_RXCFG);
-	reg |= 0x20;
-	iowrite32(reg, ctl + AGNX_CIR_RXCFG);
-	ioread32(ctl + AGNX_CIR_RXCFG);
-	enable_rx_engine(priv);
-}
-
-static inline void rx_desc_init(struct agnx_priv *priv, unsigned int idx)
-{
-	struct agnx_desc *desc = priv->rx.desc + idx;
-	struct agnx_info *info = priv->rx.info + idx;
-
-	memset(info, 0, sizeof(*info));
-
-	info->dma_len = IEEE80211_MAX_RTS_THRESHOLD + sizeof(struct agnx_hdr);
-	info->skb = dev_alloc_skb(info->dma_len);
-	if (info->skb == NULL)
-		agnx_bug("refill err");
-
-	info->mapping = pci_map_single(priv->pdev, skb_tail_pointer(info->skb),
-				       info->dma_len, PCI_DMA_FROMDEVICE);
-	memset(desc, 0, sizeof(*desc));
-	desc->dma_addr = cpu_to_be32(info->mapping);
-	/* Set the owner to the card */
-	desc->frag = cpu_to_be32(be32_to_cpu(desc->frag) | OWNER);
-}
-
-static inline void rx_desc_reinit(struct agnx_priv *priv, unsigned int idx)
-{
-	struct agnx_info *info = priv->rx.info + idx;
-
-	/* Cause ieee80211 will free the skb buffer, so we needn't to free it again?! */
-	pci_unmap_single(priv->pdev, info->mapping, info->dma_len, PCI_DMA_FROMDEVICE);
-	rx_desc_init(priv, idx);
-}
-
-static inline void rx_desc_reusing(struct agnx_priv *priv, unsigned int idx)
-{
-	struct agnx_desc *desc = priv->rx.desc + idx;
-	struct agnx_info *info = priv->rx.info + idx;
-
-	memset(desc, 0, sizeof(*desc));
-	desc->dma_addr = cpu_to_be32(info->mapping);
-	/* Set the owner to the card */
-	desc->frag = cpu_to_be32(be32_to_cpu(desc->frag) | OWNER);
-}
-
-static void rx_desc_free(struct agnx_priv *priv, unsigned int idx)
-{
-	struct agnx_desc *desc = priv->rx.desc + idx;
-	struct agnx_info *info = priv->rx.info + idx;
-
-	BUG_ON(!desc || !info);
-	if (info->mapping)
-		pci_unmap_single(priv->pdev, info->mapping, info->dma_len, PCI_DMA_FROMDEVICE);
-	if (info->skb)
-		dev_kfree_skb(info->skb);
-	memset(info, 0, sizeof(*info));
-	memset(desc, 0, sizeof(*desc));
-}
-
-static inline void __tx_desc_free(struct agnx_priv *priv,
-				  struct agnx_desc *desc, struct agnx_info *info)
-{
-	BUG_ON(!desc || !info);
-	/* TODO make sure mapping, skb and len are consistency */
-	if (info->mapping)
-		pci_unmap_single(priv->pdev, info->mapping,
-				 info->dma_len, PCI_DMA_TODEVICE);
-	if (info->type == PACKET)
-		dev_kfree_skb(info->skb);
-
-	memset(info, 0, sizeof(*info));
-	memset(desc, 0, sizeof(*desc));
-}
-
-static void txm_desc_free(struct agnx_priv *priv, unsigned int idx)
-{
-	struct agnx_desc *desc = priv->txm.desc + idx;
-	struct agnx_info *info = priv->txm.info + idx;
-
-	__tx_desc_free(priv, desc, info);
-}
-
-static void txd_desc_free(struct agnx_priv *priv, unsigned int idx)
-{
-	struct agnx_desc *desc = priv->txd.desc + idx;
-	struct agnx_info *info = priv->txd.info + idx;
-
-	__tx_desc_free(priv, desc, info);
-}
-
-int fill_rings(struct agnx_priv *priv)
-{
-	void __iomem *ctl = priv->ctl;
-	unsigned int i;
-	u32 reg;
-	AGNX_TRACE;
-
-	priv->txd.idx_sent = priv->txm.idx_sent = 0;
-	priv->rx.idx = priv->txm.idx = priv->txd.idx = 0;
-
-	for (i = 0; i < priv->rx.size; i++)
-		rx_desc_init(priv, i);
-	for (i = 0; i < priv->txm.size; i++) {
-		memset(priv->txm.desc + i, 0, sizeof(struct agnx_desc));
-		memset(priv->txm.info + i, 0, sizeof(struct agnx_info));
-	}
-	for (i = 0; i < priv->txd.size; i++) {
-		memset(priv->txd.desc + i, 0, sizeof(struct agnx_desc));
-		memset(priv->txd.info + i, 0, sizeof(struct agnx_info));
-	}
-
-	/* FIXME Set the card RX TXM and TXD address */
-	agnx_write32(ctl, AGNX_CIR_RXCMSTART, priv->rx.dma);
-	agnx_write32(ctl, AGNX_CIR_RXCMEND, priv->txm.dma);
-
-	agnx_write32(ctl, AGNX_CIR_TXMSTART, priv->txm.dma);
-	agnx_write32(ctl, AGNX_CIR_TXMEND, priv->txd.dma);
-
-	agnx_write32(ctl, AGNX_CIR_TXDSTART, priv->txd.dma);
-	agnx_write32(ctl, AGNX_CIR_TXDEND, priv->txd.dma +
-		     sizeof(struct agnx_desc) * priv->txd.size);
-
-	/* FIXME Relinquish control of rings to card */
-	reg = agnx_read32(ctl, AGNX_CIR_BLKCTL);
-	reg &= ~0x800;
-	agnx_write32(ctl, AGNX_CIR_BLKCTL, reg);
-	return 0;
-} /* fill_rings */
-
-void unfill_rings(struct agnx_priv *priv)
-{
-	unsigned long flags;
-	unsigned int i;
-	AGNX_TRACE;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	for (i = 0; i < priv->rx.size; i++)
-		rx_desc_free(priv, i);
-	for (i = 0; i < priv->txm.size; i++)
-		txm_desc_free(priv, i);
-	for (i = 0; i < priv->txd.size; i++)
-		txd_desc_free(priv, i);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-/* Extract the bitrate out of a CCK PLCP header.
-   copy from bcm43xx driver */
-static inline u8 agnx_plcp_get_bitrate_cck(__be32 *phyhdr_11b)
-{
-	/* FIXME */
-	switch (*(u8 *)phyhdr_11b) {
-	case 0x0A:
-		return 0;
-	case 0x14:
-		return 1;
-	case 0x37:
-		return 2;
-	case 0x6E:
-		return 3;
-	}
-	agnx_bug("Wrong plcp rate");
-	return 0;
-}
-
-/* FIXME */
-static inline u8 agnx_plcp_get_bitrate_ofdm(__be32 *phyhdr_11g)
-{
-	u8 rate = *(u8 *)phyhdr_11g & 0xF;
-
-	printk(PFX "G mode rate is 0x%x\n", rate);
-	return rate;
-}
-
-/* FIXME */
-static void get_rx_stats(struct agnx_priv *priv, struct agnx_hdr *hdr,
-			 struct ieee80211_rx_status *stat)
-{
-	void __iomem *ctl = priv->ctl;
-	u8 *rssi;
-	u32 noise;
-	/* FIXME just for test */
-	int snr = 40;		/* signal-to-noise ratio */
-
-	memset(stat, 0, sizeof(*stat));
-	/* RSSI */
-	rssi = (u8 *)&hdr->phy_stats_lo;
-/*	stat->ssi = (rssi[0] + rssi[1] + rssi[2]) / 3; */
-	/* Noise */
-	noise = ioread32(ctl + AGNX_GCR_NOISE0);
-	noise += ioread32(ctl + AGNX_GCR_NOISE1);
-	noise += ioread32(ctl + AGNX_GCR_NOISE2);
-	stat->noise = noise / 3;
-	/* Signal quality */
-/*	snr = stat->ssi - stat->noise; */
-	if (snr >= 0 && snr < 40)
-		stat->signal = 5 * snr / 2;
-	else if (snr >= 40)
-		stat->signal = 100;
-	else
-		stat->signal = 0;
-
-
-	if (hdr->_11b0 && !hdr->_11g0) {
-		stat->rate_idx = agnx_plcp_get_bitrate_cck(&hdr->_11b0);
-	} else if (!hdr->_11b0 && hdr->_11g0) {
-		printk(PFX "RX: Found G mode packet\n");
-		stat->rate_idx = agnx_plcp_get_bitrate_ofdm(&hdr->_11g0);
-	} else
-		agnx_bug("Unknown packets type");
-
-
-	stat->band = IEEE80211_BAND_2GHZ;
-	stat->freq = agnx_channels[priv->channel - 1].center_freq;
-/*	stat->antenna = 3;
-	stat->mactime = be32_to_cpu(hdr->time_stamp);
-	stat->channel = priv->channel; */
-}
-
-static inline void combine_hdr_frag(struct ieee80211_hdr *ieeehdr,
-				    struct sk_buff *skb)
-{
-	u16 fctl;
-	unsigned int hdrlen;
-
-	fctl = le16_to_cpu(ieeehdr->frame_control);
-	hdrlen = ieee80211_hdrlen(fctl);
-	/* FIXME */
-	if (hdrlen < (2+2+6)/*minimum hdr*/ ||
-	    hdrlen > sizeof(struct ieee80211_mgmt)) {
-		printk(KERN_ERR PFX "hdr len is %d\n", hdrlen);
-		agnx_bug("Wrong ieee80211 hdr detected");
-	}
-	skb_push(skb, hdrlen);
-	memcpy(skb->data, ieeehdr, hdrlen);
-} /* combine_hdr_frag */
-
-static inline int agnx_packet_check(struct agnx_priv *priv, struct agnx_hdr *agnxhdr,
-				    unsigned packet_len)
-{
-	if (agnx_get_bits(CRC_FAIL, CRC_FAIL_SHIFT, be32_to_cpu(agnxhdr->reg1)) == 1) {
-		printk(PFX "RX: CRC check fail\n");
-		goto drop;
-	}
-	if (packet_len > 2048) {
-		printk(PFX "RX: Too long packet detected\n");
-		goto drop;
-	}
-
-	/* FIXME Just usable for Promious Mode, for Manage mode exclude FCS */
-/* 	if (packet_len - sizeof(*agnxhdr) < FCS_LEN) { */
-/* 		printk(PFX "RX: Too short packet detected\n"); */
-/* 		goto drop; */
-/* 	} */
-	return 0;
-drop:
-	priv->stats.dot11FCSErrorCount++;
-	return -1;
-}
-
-void handle_rx_irq(struct agnx_priv *priv)
-{
-	struct ieee80211_rx_status status;
-	unsigned int len;
-/*	AGNX_TRACE; */
-
-	do {
-		struct agnx_desc *desc;
-		u32 frag;
-		struct agnx_info *info;
-		struct agnx_hdr *hdr;
-		struct sk_buff *skb;
-		unsigned int i = priv->rx.idx % priv->rx.size;
-
-		desc = priv->rx.desc + i;
-		frag = be32_to_cpu(desc->frag);
-		if (frag & OWNER)
-			break;
-
-		info = priv->rx.info + i;
-		skb = info->skb;
-		hdr = (struct agnx_hdr *)(skb->data);
-
-		len = (frag & PACKET_LEN) >> PACKET_LEN_SHIFT;
-		if (agnx_packet_check(priv, hdr, len) == -1) {
-			rx_desc_reusing(priv, i);
-			continue;
-		}
-		skb_put(skb, len);
-
-		do {
-				u16 fctl;
-			fctl = le16_to_cpu(((struct ieee80211_hdr *)hdr->mac_hdr)->frame_control);
-			if ((fctl & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_BEACON)/* && !(fctl & IEEE80211_STYPE_BEACON)) */
-				dump_ieee80211_hdr((struct ieee80211_hdr *)hdr->mac_hdr, "RX");
-		} while (0);
-
-		if (hdr->_11b0 && !hdr->_11g0) {
-/*			int j;
-			u16 fctl = le16_to_cpu(((struct ieee80211_hdr *)hdr->mac_hdr)
-					       ->frame_control);
-			if ( (fctl & IEEE80211_FCTL_FTYPE) ==  IEEE80211_FTYPE_DATA) {
-				agnx_print_rx_hdr(hdr);
-				agnx_print_sta(priv, BSSID_STAID);
-				for (j = 0; j < 8; j++)
-					agnx_print_sta_tx_wq(priv, BSSID_STAID, j);
-			} */
-
-			get_rx_stats(priv, hdr, &status);
-			skb_pull(skb, sizeof(*hdr));
-			combine_hdr_frag((struct ieee80211_hdr *)hdr->mac_hdr, skb);
-		} else if (!hdr->_11b0 && hdr->_11g0) {
-/*			int j; */
-			agnx_print_rx_hdr(hdr);
-			agnx_print_sta(priv, BSSID_STAID);
-/*			for (j = 0; j < 8; j++) */
-			agnx_print_sta_tx_wq(priv, BSSID_STAID, 0);
-
-			print_hex_dump_bytes("agnx: RX_PACKET: ", DUMP_PREFIX_NONE,
-					     skb->data, skb->len + 8);
-
-/*			if (agnx_plcp_get_bitrate_ofdm(&hdr->_11g0) == 0) */
-			get_rx_stats(priv, hdr, &status);
-			skb_pull(skb, sizeof(*hdr));
-			combine_hdr_frag((struct ieee80211_hdr *)
-					 ((void *)&hdr->mac_hdr), skb);
-/*			dump_ieee80211_hdr((struct ieee80211_hdr *)skb->data, "RX G"); */
-		} else
-			agnx_bug("Unknown packets type");
-		memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
-		ieee80211_rx_irqsafe(priv->hw, skb);
-		rx_desc_reinit(priv, i);
-
-	} while (priv->rx.idx++);
-} /* handle_rx_irq */
-
-static inline void handle_tx_irq(struct agnx_priv *priv, struct agnx_ring *ring)
-{
-	struct agnx_desc *desc;
-	struct agnx_info *info;
-	unsigned int idx;
-
-	for (idx = ring->idx_sent; idx < ring->idx; idx++) {
-		unsigned int i = idx % ring->size;
-		u32  frag;
-
-		desc = ring->desc + i;
-		info = ring->info + i;
-
-		frag = be32_to_cpu(desc->frag);
-		if (frag & OWNER) {
-			if (info->type == HEADER)
-				break;
-			else
-				agnx_bug("TX error");
-		}
-
-		pci_unmap_single(priv->pdev, info->mapping, info->dma_len, PCI_DMA_TODEVICE);
-
-		do {
-/*			int j; */
-			size_t len;
-			len = info->skb->len - sizeof(struct agnx_hdr) + info->hdr_len;
-/*			if (len == 614) { */
-/*				agnx_print_desc(desc); */
-				if (info->type == PACKET) {
-/*					agnx_print_tx_hdr((struct agnx_hdr *)info->skb->data); */
-/*					agnx_print_sta_power(priv, LOCAL_STAID); */
-/*					agnx_print_sta(priv, LOCAL_STAID); */
-/*					for (j = 0; j < 8; j++) */
-/*					agnx_print_sta_tx_wq(priv, LOCAL_STAID, 0); */
-/*					agnx_print_sta_power(priv, BSSID_STAID); */
-/*					agnx_print_sta(priv, BSSID_STAID); */
-/*					for (j = 0; j < 8; j++) */
-/*					agnx_print_sta_tx_wq(priv, BSSID_STAID, 0); */
-				}
-/*			} */
-		} while (0);
-
-		if (info->type == PACKET) {
-/*			dump_txm_registers(priv);
-			dump_rxm_registers(priv);
-			dump_bm_registers(priv);
-			dump_cir_registers(priv); */
-		}
-
-		if (info->type == PACKET) {
-/*			struct ieee80211_hdr *hdr; */
-			struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(info->skb);
-
-			skb_pull(info->skb, sizeof(struct agnx_hdr));
-			memcpy(skb_push(info->skb, info->hdr_len), &info->hdr, info->hdr_len);
-
-/*			dump_ieee80211_hdr((struct ieee80211_hdr *)info->skb->data, "TX_HANDLE"); */
-/* 			print_hex_dump_bytes("agnx: TX_HANDLE: ", DUMP_PREFIX_NONE, */
-/* 					     info->skb->data, info->skb->len); */
-
-			if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK))
-				txi->flags |= IEEE80211_TX_STAT_ACK;
-
-			ieee80211_tx_status_irqsafe(priv->hw, info->skb);
-
-
-/* 				info->tx_status.queue_number = (ring->size - i) / 2; */
-/* 				ieee80211_tx_status_irqsafe(priv->hw, info->skb, &(info->tx_status)); */
-/* 			} else */
-/* 				dev_kfree_skb_irq(info->skb); */
-		}
-		memset(desc, 0, sizeof(*desc));
-		memset(info, 0, sizeof(*info));
-	}
-
-	ring->idx_sent = idx;
-	/* TODO fill the priv->low_level_stats */
-
-	/* ieee80211_wake_queue(priv->hw, 0); */
-}
-
-void handle_txm_irq(struct agnx_priv *priv)
-{
-	handle_tx_irq(priv, &priv->txm);
-}
-
-void handle_txd_irq(struct agnx_priv *priv)
-{
-	handle_tx_irq(priv, &priv->txd);
-}
-
-void handle_other_irq(struct agnx_priv *priv)
-{
-/*	void __iomem *ctl = priv->ctl; */
-	u32 status = priv->irq_status;
-	void __iomem *ctl = priv->ctl;
-	u32 reg;
-
-	if (status & IRQ_TX_BEACON) {
-		iowrite32(IRQ_TX_BEACON, ctl + AGNX_INT_STAT);
-		printk(PFX "IRQ: TX Beacon control is 0X%.8X\n", ioread32(ctl + AGNX_TXM_BEACON_CTL));
-		printk(PFX "IRQ: TX Beacon rx frame num: %d\n", rx_frame_cnt);
-	}
-	if (status & IRQ_TX_RETRY) {
-		reg = ioread32(ctl + AGNX_TXM_RETRYSTAID);
-		printk(PFX "IRQ: TX Retry, RETRY STA ID is %x\n", reg);
-	}
-	if (status & IRQ_TX_ACTIVITY)
-		printk(PFX "IRQ: TX Activity\n");
-	if (status & IRQ_RX_ACTIVITY)
-		printk(PFX "IRQ: RX Activity\n");
-	if (status & IRQ_RX_X)
-		printk(PFX "IRQ: RX X\n");
-	if (status & IRQ_RX_Y) {
-		reg = ioread32(ctl + AGNX_INT_MASK);
-		reg &= ~IRQ_RX_Y;
-		iowrite32(reg, ctl + AGNX_INT_MASK);
-		iowrite32(IRQ_RX_Y, ctl + AGNX_INT_STAT);
-		printk(PFX "IRQ: RX Y\n");
-	}
-	if (status & IRQ_RX_HASHHIT)  {
-		reg = ioread32(ctl + AGNX_INT_MASK);
-		reg &= ~IRQ_RX_HASHHIT;
-		iowrite32(reg, ctl + AGNX_INT_MASK);
-		iowrite32(IRQ_RX_HASHHIT, ctl + AGNX_INT_STAT);
-		printk(PFX "IRQ: RX Hash Hit\n");
-
-	}
-	if (status & IRQ_RX_FRAME) {
-		reg = ioread32(ctl + AGNX_INT_MASK);
-		reg &= ~IRQ_RX_FRAME;
-		iowrite32(reg, ctl + AGNX_INT_MASK);
-		iowrite32(IRQ_RX_FRAME, ctl + AGNX_INT_STAT);
-		printk(PFX "IRQ: RX Frame\n");
-		rx_frame_cnt++;
-	}
-	if (status & IRQ_ERR_INT) {
-		iowrite32(IRQ_ERR_INT, ctl + AGNX_INT_STAT);
-/*		agnx_hw_reset(priv); */
-		printk(PFX "IRQ: Error Interrupt\n");
-	}
-	if (status & IRQ_TX_QUE_FULL)
-		printk(PFX "IRQ: TX Workqueue Full\n");
-	if (status & IRQ_BANDMAN_ERR)
-		printk(PFX "IRQ: Bandwidth Management Error\n");
-	if (status & IRQ_TX_DISABLE)
-		printk(PFX "IRQ: TX Disable\n");
-	if (status & IRQ_RX_IVASESKEY)
-		printk(PFX "IRQ: RX Invalid Session Key\n");
-	if (status & IRQ_REP_THHIT)
-		printk(PFX "IRQ: Replay Threshold Hit\n");
-	if (status & IRQ_TIMER1)
-		printk(PFX "IRQ: Timer1\n");
-	if (status & IRQ_TIMER_CNT)
-		printk(PFX "IRQ: Timer Count\n");
-	if (status & IRQ_PHY_FASTINT)
-		printk(PFX "IRQ: Phy Fast Interrupt\n");
-	if (status & IRQ_PHY_SLOWINT)
-		printk(PFX "IRQ: Phy Slow Interrupt\n");
-	if (status & IRQ_OTHER)
-		printk(PFX "IRQ: 0x80000000\n");
-} /* handle_other_irq */
-
-
-static inline void route_flag_set(struct agnx_hdr *txhdr)
-{
-/*	u32 reg = 0; */
-
-	/* FIXME */
-/*	reg = (0x7 << ROUTE_COMPRESSION_SHIFT) & ROUTE_COMPRESSION; */
-/*	txhdr->reg5 = cpu_to_be32(reg); */
-	txhdr->reg5 = (0xa << 0x0) | (0x7 << 0x18);
-/*	txhdr->reg5 = cpu_to_be32((0xa << 0x0) | (0x7 << 0x18)); */
-/*	txhdr->reg5 = cpu_to_be32(0x7 << 0x0); */
-}
-
-/* Return 0 if no match */
-static inline unsigned int get_power_level(unsigned int rate, unsigned int antennas_num)
-{
-	unsigned int power_level;
-
-	switch (rate) {
-	case 10:
-	case 20:
-	case 55:
-	case 60:
-	case 90:
-	case 120:
-		power_level = 22;
-		break;
-
-	case 180:
-		power_level = 19;
-		break;
-
-	case 240:
-		power_level = 18;
-		break;
-
-	case 360:
-		power_level = 16;
-		break;
-
-	case 480:
-		power_level = 15;
-		break;
-
-	case 540:
-		power_level = 14;
-		break;
-	default:
-		agnx_bug("Error rate setting\n");
-	}
-
-	if (power_level && (antennas_num == 2))
-		power_level -= 3;
-
-	return power_level;
-}
-
-static inline void fill_agnx_hdr(struct agnx_priv *priv, struct agnx_info *tx_info)
-{
-	struct agnx_hdr *txhdr = (struct agnx_hdr *)tx_info->skb->data;
-	size_t len;
-	u16 fc = le16_to_cpu(*(__le16 *)&tx_info->hdr);
-	u32 reg;
-
-	memset(txhdr, 0, sizeof(*txhdr));
-
-/*	reg = agnx_set_bits(STATION_ID, STATION_ID_SHIFT, LOCAL_STAID); */
-	reg = agnx_set_bits(STATION_ID, STATION_ID_SHIFT, BSSID_STAID);
-	reg |= agnx_set_bits(WORKQUEUE_ID, WORKQUEUE_ID_SHIFT, 0);
-	txhdr->reg4 = cpu_to_be32(reg);
-
-	/* Set the Hardware Sequence Number to 1? */
-	reg = agnx_set_bits(SEQUENCE_NUMBER, SEQUENCE_NUMBER_SHIFT, 0);
-/*	reg = agnx_set_bits(SEQUENCE_NUMBER, SEQUENCE_NUMBER_SHIFT, 1); */
-	reg |= agnx_set_bits(MAC_HDR_LEN, MAC_HDR_LEN_SHIFT, tx_info->hdr_len);
-	txhdr->reg1 = cpu_to_be32(reg);
-	/* Set the agnx_hdr's MAC header */
-	memcpy(txhdr->mac_hdr, &tx_info->hdr, tx_info->hdr_len);
-
-	reg = agnx_set_bits(ACK, ACK_SHIFT, 1);
-/*	reg = agnx_set_bits(ACK, ACK_SHIFT, 0); */
-	reg |= agnx_set_bits(MULTICAST, MULTICAST_SHIFT, 0);
-/*	reg |= agnx_set_bits(MULTICAST, MULTICAST_SHIFT, 1); */
-	reg |= agnx_set_bits(RELAY, RELAY_SHIFT, 0);
-	reg |= agnx_set_bits(TM, TM_SHIFT, 0);
-	txhdr->reg0 = cpu_to_be32(reg);
-
-	/* Set the long and short retry limits */
-	txhdr->tx.short_retry_limit = tx_info->txi->control.rates[0].count;
-	txhdr->tx.long_retry_limit = tx_info->txi->control.rates[0].count;
-
-	/* FIXME */
-	len = tx_info->skb->len - sizeof(*txhdr) + tx_info->hdr_len + FCS_LEN;
-	if (fc & IEEE80211_FCTL_PROTECTED)
-		len += 8;
-	len = 2398;
-	reg = agnx_set_bits(FRAG_SIZE, FRAG_SIZE_SHIFT, len);
-	len = tx_info->skb->len - sizeof(*txhdr);
-	reg |= agnx_set_bits(PAYLOAD_LEN, PAYLOAD_LEN_SHIFT, len);
-	txhdr->reg3 = cpu_to_be32(reg);
-
-	route_flag_set(txhdr);
-} /* fill_hdr */
-
-static void txm_power_set(struct agnx_priv *priv,
-			  struct ieee80211_tx_info *txi)
-{
-	struct agnx_sta_power power;
-	u32 reg;
-
-	/* FIXME */
-	if (txi->control.rates[0].idx < 0) {
-		/* For B mode Short Preamble */
-		reg = agnx_set_bits(PHY_MODE, PHY_MODE_SHIFT, AGNX_MODE_80211B_SHORT);
-/*		control->tx_rate = -control->tx_rate; */
-	} else
-		reg = agnx_set_bits(PHY_MODE, PHY_MODE_SHIFT, AGNX_MODE_80211G);
-/*		reg = agnx_set_bits(PHY_MODE, PHY_MODE_SHIFT, AGNX_MODE_80211B_LONG); */
-	reg |= agnx_set_bits(SIGNAL, SIGNAL_SHIFT, 0xB);
-	reg |= agnx_set_bits(RATE, RATE_SHIFT, 0xB);
-/*	reg |= agnx_set_bits(POWER_LEVEL, POWER_LEVEL_SHIFT, 15); */
-	reg |= agnx_set_bits(POWER_LEVEL, POWER_LEVEL_SHIFT, 20);
-	/* if rate < 11M set it to 0 */
-	reg |= agnx_set_bits(NUM_TRANSMITTERS, NUM_TRANSMITTERS_SHIFT, 1);
-/*	reg |= agnx_set_bits(EDCF, EDCF_SHIFT, 1); */
-/*	reg |= agnx_set_bits(TIFS, TIFS_SHIFT, 1); */
-
-	power.reg = reg;
-/*	power.reg = cpu_to_le32(reg); */
-
-/*	set_sta_power(priv, &power, LOCAL_STAID); */
-	set_sta_power(priv, &power, BSSID_STAID);
-}
-
-static inline int tx_packet_check(struct sk_buff *skb)
-{
-	unsigned int ieee_len = ieee80211_get_hdrlen_from_skb(skb);
-	if (skb->len > 2048) {
-		printk(KERN_ERR PFX "length is %d\n", skb->len);
-		agnx_bug("Too long TX skb");
-		return -1;
-	}
-	/* FIXME */
-	if (skb->len == ieee_len) {
-		printk(PFX "A strange TX packet\n");
-		return -1;
-		/* tx_faile_irqsafe(); */
-	}
-	return 0;
-}
-
-static int __agnx_tx(struct agnx_priv *priv, struct sk_buff *skb,
-		     struct agnx_ring *ring)
-{
-	struct agnx_desc *hdr_desc, *frag_desc;
-	struct agnx_info *hdr_info, *frag_info;
-	struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb);
-	unsigned long flags;
-	unsigned int i;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* The RX interrupt need be Disable until this TX packet
-	   is handled in the next tx interrupt */
-	disable_rx_interrupt(priv);
-
-	i = ring->idx;
-	ring->idx += 2;
-/*   	if (priv->txm_idx - priv->txm_idx_sent == AGNX_TXM_RING_SIZE - 2) */
-/* 		ieee80211_stop_queue(priv->hw, 0); */
-
-	/* Set agnx header's info and desc */
-	i %= ring->size;
-	hdr_desc = ring->desc + i;
-	hdr_info = ring->info + i;
-	hdr_info->hdr_len = ieee80211_get_hdrlen_from_skb(skb);
-	memcpy(&hdr_info->hdr, skb->data, hdr_info->hdr_len);
-
-	/* Add the agnx header to the front of the SKB */
-	skb_push(skb, sizeof(struct agnx_hdr) - hdr_info->hdr_len);
-
-	hdr_info->txi = txi;
-	hdr_info->dma_len = sizeof(struct agnx_hdr);
-	hdr_info->skb = skb;
-	hdr_info->type = HEADER;
-	fill_agnx_hdr(priv, hdr_info);
-	hdr_info->mapping = pci_map_single(priv->pdev, skb->data,
-					   hdr_info->dma_len, PCI_DMA_TODEVICE);
-	do {
-		u32 frag = 0;
-		frag |= agnx_set_bits(FIRST_FRAG, FIRST_FRAG_SHIFT, 1);
-		frag |= agnx_set_bits(LAST_FRAG, LAST_FRAG_SHIFT, 0);
-		frag |= agnx_set_bits(PACKET_LEN, PACKET_LEN_SHIFT, skb->len);
-		frag |= agnx_set_bits(FIRST_FRAG_LEN, FIRST_FRAG_LEN_SHIFT, 1);
-		frag |= agnx_set_bits(OWNER, OWNER_SHIFT, 1);
-		hdr_desc->frag = cpu_to_be32(frag);
-	} while (0);
-	hdr_desc->dma_addr = cpu_to_be32(hdr_info->mapping);
-
-
-	/* Set Frag's info and desc */
-	i = (i + 1) % ring->size;
-	frag_desc = ring->desc + i;
-	frag_info = ring->info + i;
-	memcpy(frag_info, hdr_info, sizeof(struct agnx_info));
-	frag_info->type = PACKET;
-	frag_info->dma_len = skb->len - hdr_info->dma_len;
-	frag_info->mapping = pci_map_single(priv->pdev, skb->data + hdr_info->dma_len,
-					    frag_info->dma_len, PCI_DMA_TODEVICE);
-	do {
-		u32 frag = 0;
-		frag |= agnx_set_bits(FIRST_FRAG, FIRST_FRAG_SHIFT, 0);
-		frag |= agnx_set_bits(LAST_FRAG, LAST_FRAG_SHIFT, 1);
-		frag |= agnx_set_bits(PACKET_LEN, PACKET_LEN_SHIFT, skb->len);
-		frag |= agnx_set_bits(SUB_FRAG_LEN, SUB_FRAG_LEN_SHIFT, frag_info->dma_len);
-		frag_desc->frag = cpu_to_be32(frag);
-	} while (0);
-	frag_desc->dma_addr = cpu_to_be32(frag_info->mapping);
-
-	txm_power_set(priv, txi);
-
-/*	do { */
-/*		int j; */
-/*		size_t len; */
-/*		len = skb->len - hdr_info->dma_len + hdr_info->hdr_len;  */
-/*		if (len == 614) { */
-/*			agnx_print_desc(hdr_desc); */
-/*			agnx_print_desc(frag_desc); */
-/*			agnx_print_tx_hdr((struct agnx_hdr *)skb->data); */
-/*			agnx_print_sta_power(priv, LOCAL_STAID); */
-/*			agnx_print_sta(priv, LOCAL_STAID); */
-/*			for (j = 0; j < 8; j++) */
-/*				agnx_print_sta_tx_wq(priv, LOCAL_STAID, j); */
-/*			agnx_print_sta_power(priv, BSSID_STAID); */
-/*			agnx_print_sta(priv, BSSID_STAID); */
-/*			for (j = 0; j < 8; j++) */
-/*				agnx_print_sta_tx_wq(priv, BSSID_STAID, j); */
-/*			} */
-/*	} while (0); */
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	/* FIXME ugly code */
-	/* Trigger TXM */
-	do {
-		u32 reg;
-		reg = (ioread32(priv->ctl + AGNX_CIR_TXMCTL));
-		reg |= 0x8;
-		iowrite32((reg), priv->ctl + AGNX_CIR_TXMCTL);
-	} while (0);
-
-	/* Trigger TXD */
-	do {
-		u32 reg;
-		reg = (ioread32(priv->ctl + AGNX_CIR_TXDCTL));
-		reg |= 0x8;
-		iowrite32((reg), priv->ctl + AGNX_CIR_TXDCTL);
-	} while (0);
-
-	return 0;
-}
-
-int _agnx_tx(struct agnx_priv *priv, struct sk_buff *skb)
-{
-	u16 fctl;
-
-	if (tx_packet_check(skb))
-		return 0;
-
-/*	print_hex_dump_bytes("agnx: TX_PACKET: ", DUMP_PREFIX_NONE, */
-/*			     skb->data, skb->len); */
-
-	fctl = le16_to_cpu(*((__le16 *)skb->data));
-
-	if ((fctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)
-		return __agnx_tx(priv, skb, &priv->txd);
-	else
-		return __agnx_tx(priv, skb, &priv->txm);
-}
diff --git a/drivers/staging/agnx/xmit.h b/drivers/staging/agnx/xmit.h
deleted file mode 100644
index 93ac4157e697..000000000000
--- a/drivers/staging/agnx/xmit.h
+++ /dev/null
@@ -1,250 +0,0 @@
-#ifndef AGNX_XMIT_H_
-#define AGNX_XMIT_H_
-
-#include <net/mac80211.h>
-
-struct agnx_priv;
-
-static inline u32 agnx_set_bits(u32 mask, u8 shift, u32 value)
-{
-	return (value << shift) & mask;
-}
-
-static inline u32 agnx_get_bits(u32 mask, u8 shift, u32 value)
-{
-	return (value & mask) >> shift;
-}
-
-
-struct agnx_rx {
-	__be16 rx_packet_duration; /*  RX Packet Duration */
-	__be16 replay_cnt;	/* Replay Count */
-} __attribute__((__packed__));
-
-
-struct agnx_tx {
-	u8 long_retry_limit; /* Long Retry Limit */
-	u8 short_retry_limit; /* Short Retry Limit */
-	u8 long_retry_cnt;	/* Long Retry Count */
-	u8 short_retry_cnt; /* Short Retry Count */
-} __attribute__((__packed__));
-
-
-/* Copy from bcm43xx */
-#define P4D_BYT3S(magic, nr_bytes)      u8 __p4dding##magic[nr_bytes]
-#define P4D_BYTES(line, nr_bytes)       P4D_BYT3S(line, nr_bytes)
-#define PAD_BYTES(nr_bytes)             P4D_BYTES(__LINE__, nr_bytes)
-
-#define P4D_BIT3S(magic, nr_bits)       __be32 __padding##magic:nr_bits
-#define P4D_BITS(line, nr_bits)         P4D_BIT3S(line, nr_bits)
-#define PAD_BITS(nr_bits)	        P4D_BITS(__LINE__, nr_bits)
-
-
-struct agnx_hdr {
-	__be32 reg0;
-#define RTS		        0x80000000 /* RTS */
-#define RTS_SHIFT		31
-#define MULTICAST	        0x40000000 /* multicast */
-#define MULTICAST_SHIFT		30
-#define ACK			0x30000000 /* ACK */
-#define ACK_SHIFT		28
-#define TM			0x08000000 /* TM */
-#define TM_SHIFT		27
-#define RELAY			0x04000000 /* Relay */
-#define RELAY_SHIFT		26
-/* 	PAD_BITS(4); */
-#define REVISED_FCS		0x00380000 /* revised FCS */
-#define REVISED_FCS_SHIFT	19
-#define NEXT_BUFFER_ADDR	0x0007FFFF /* Next Buffer Address */
-#define NEXT_BUFFER_ADDR_SHIFT	0
-
-	__be32 reg1;
-#define MAC_HDR_LEN		0xFC000000 /* MAC Header Length  */
-#define MAC_HDR_LEN_SHIFT	26
-#define DURATION_OVERIDE	0x02000000 /* Duration Override */
-#define DURATION_OVERIDE_SHIFT	25
-#define PHY_HDR_OVERIDE		0x01000000 /* PHY Header Override */
-#define PHY_HDR_OVERIDE_SHIFT	24
-#define CRC_FAIL		0x00800000 /* CRC fail */
-#define CRC_FAIL_SHIFT		23
-/*	PAD_BITS(1); */
-#define SEQUENCE_NUMBER		0x00200000 /* Sequence Number */
-#define SEQUENCE_NUMBER_SHIFT	21
-/*	PAD_BITS(2); */
-#define BUFF_HEAD_ADDR		0x0007FFFF /* Buffer Head Address */
-#define BUFF_HEAD_ADDR_SHIFT	0
-
-	__be32 reg2;
-#define PDU_COUNT		0xFC000000 /* PDU Count */
-#define PDU_COUNT_SHIFT		26
-/* 	PAD_BITS(3); */
-#define WEP_KEY			0x00600000 /* WEP Key # */
-#define WEP_KEY_SHIFT		21
-#define USES_WEP_KEY		0x00100000 /* Uses WEP Key */
-#define USES_WEP_KEY_SHIFT	20
-#define KEEP_ALIVE		0x00080000 /* Keep alive */
-#define KEEP_ALIVE_SHIFT	19
-#define BUFF_TAIL_ADDR		0x0007FFFF /* Buffer Tail Address */
-#define BUFF_TAIL_ADDR_SHIFT	0
-
-	__be32 reg3;
-#define CTS_11G			0x80000000	/* CTS in 11g */
-#define CTS_11G_SHIFT		31
-#define RTS_11G			0x40000000	/* RTS in 11g */
-#define RTS_11G_SHIFT		30
-/* PAD_BITS(2); */
-#define FRAG_SIZE		0x0FFF0000	/* fragment size */
-#define FRAG_SIZE_SHIFT		16
-#define PAYLOAD_LEN		0x0000FFF0	/* payload length */
-#define PAYLOAD_LEN_SHIFT	4
-#define FRAG_NUM		0x0000000F	/* number of frags */
-#define FRAG_NUM_SHIFT		0
-
-	__be32 reg4;
-/* 	PAD_BITS(4); */
-#define RELAY_STAID		0x0FFF0000 /* relayStald */
-#define RELAY_STAID_SHIFT	16
-#define STATION_ID		0x0000FFF0 /* Station ID */
-#define STATION_ID_SHIFT	4
-#define WORKQUEUE_ID		0x0000000F /* Workqueue ID */
-#define WORKQUEUE_ID_SHIFT	0
-
-	/* FIXME this register maybe is LE? */
-	__be32 reg5;
-/* 	PAD_BITS(4); */
-#define ROUTE_HOST		0x0F000000
-#define ROUTE_HOST_SHIFT	24
-#define ROUTE_CARD_CPU		0x00F00000
-#define ROUTE_CARD_CPU_SHIFT	20
-#define ROUTE_ENCRYPTION	0x000F0000
-#define ROUTE_ENCRYPTION_SHIFT	16
-#define ROUTE_TX		0x0000F000
-#define ROUTE_TX_SHIFT		12
-#define ROUTE_RX1		0x00000F00
-#define ROUTE_RX1_SHIFT		8
-#define ROUTE_RX2		0x000000F0
-#define ROUTE_RX2_SHIFT		4
-#define ROUTE_COMPRESSION	0x0000000F
-#define ROUTE_COMPRESSION_SHIFT 0
-
-	__be32 _11g0;			/* 11g */
-	__be32 _11g1;			/* 11g */
-	__be32 _11b0;			/* 11b */
-	__be32 _11b1;			/* 11b */
-	u8 mac_hdr[32];			/* MAC header */
-
-	__be16 rts_duration;		/* RTS duration */
-	__be16 last_duration;		/* Last duration */
-	__be16 sec_last_duration;	/* Second to Last duration */
-	__be16 other_duration;		/* Other duration */
-	__be16 tx_last_duration;	/* TX Last duration */
-	__be16 tx_other_duration;	/* TX Other Duration */
-	__be16 last_11g_len;		/* Length of last 11g */
-	__be16 other_11g_len;		/* Lenght of other 11g */
-
-	__be16 last_11b_len;		/* Length of last 11b */
-	__be16 other_11b_len;		/* Lenght of other 11b */
-
-
-	__be16 reg6;
-#define MBF			0xF000 /* mbf */
-#define MBF_SHIFT		12
-#define RSVD4			0x0FFF /* rsvd4 */
-#define RSVD4_SHIFT		0
-
-	__be16 rx_frag_stat;	/* RX fragmentation status */
-
-	__be32 time_stamp;	/* TimeStamp */
-	__be32 phy_stats_hi;	/* PHY stats hi */
-	__be32 phy_stats_lo;	/* PHY stats lo */
-	__be32 mic_key0;	/* MIC key 0 */
-	__be32 mic_key1;	/* MIC key 1 */
-
-	union {			/* RX/TX Union */
-		struct agnx_rx rx;
-		struct agnx_tx tx;
-	};
-
-	u8 rx_channel;		/* Recieve Channel */
-	PAD_BYTES(3);
-
-	u8 reserved[4];
-} __attribute__((__packed__));
-
-
-struct agnx_desc {
-#define PACKET_LEN		0xFFF00000
-#define PACKET_LEN_SHIFT	20
-/* ------------------------------------------------ */
-#define FIRST_PACKET_MASK	0x00080000
-#define FIRST_PACKET_MASK_SHIFT	19
-#define FIRST_RESERV2		0x00040000
-#define FIRST_RESERV2_SHIFT	18
-#define FIRST_TKIP_ERROR	0x00020000
-#define FIRST_TKIP_ERROR_SHIFT	17
-#define FIRST_TKIP_PACKET	0x00010000
-#define FIRST_TKIP_PACKET_SHIFT	16
-#define FIRST_RESERV1		0x0000F000
-#define FIRST_RESERV1_SHIFT	12
-#define FIRST_FRAG_LEN		0x00000FF8
-#define FIRST_FRAG_LEN_SHIFT	3
-/* ------------------------------------------------ */
-#define SUB_RESERV2		0x000c0000
-#define SUB_RESERV2_SHIFT	18
-#define SUB_TKIP_ERROR		0x00020000
-#define SUB_TKIP_ERROR_SHIFT	17
-#define SUB_TKIP_PACKET		0x00010000
-#define SUB_TKIP_PACKET_SHIFT	16
-#define SUB_RESERV1		0x00008000
-#define SUB_RESERV1_SHIFT	15
-#define SUB_FRAG_LEN		0x00007FF8
-#define SUB_FRAG_LEN_SHIFT	3
-/* ------------------------------------------------ */
-#define FIRST_FRAG		0x00000004
-#define FIRST_FRAG_SHIFT	2
-#define LAST_FRAG		0x00000002
-#define LAST_FRAG_SHIFT		1
-#define OWNER			0x00000001
-#define OWNER_SHIFT		0
-	__be32 frag;
-	__be32 dma_addr;
-} __attribute__((__packed__));
-
-enum {HEADER, PACKET};
-
-struct agnx_info {
-        struct sk_buff *skb;
-        dma_addr_t mapping;
-	u32 dma_len;		/* dma buffer len  */
-	/* Below fields only usful for tx */
-	u32 hdr_len;		/* ieee80211 header length */
-	unsigned int type;
-        struct ieee80211_tx_info *txi;
-        struct ieee80211_hdr hdr;
-};
-
-
-struct agnx_ring {
-	struct agnx_desc *desc;
-	dma_addr_t dma;
-	struct agnx_info *info;
-	/* Will lead to overflow when sent packet number enough? */
-	unsigned int idx;
-	unsigned int idx_sent;		/* only usful for txd and txm */
-	unsigned int size;
-};
-
-#define AGNX_RX_RING_SIZE	128
-#define AGNX_TXD_RING_SIZE	256
-#define AGNX_TXM_RING_SIZE	128
-
-void disable_rx_interrupt(struct agnx_priv *priv);
-void enable_rx_interrupt(struct agnx_priv *priv);
-int fill_rings(struct agnx_priv *priv);
-void unfill_rings(struct agnx_priv *priv);
-void handle_rx_irq(struct agnx_priv *priv);
-void handle_txd_irq(struct agnx_priv *priv);
-void handle_txm_irq(struct agnx_priv *priv);
-void handle_other_irq(struct agnx_priv *priv);
-int _agnx_tx(struct agnx_priv *priv, struct sk_buff *skb);
-#endif /* AGNX_XMIT_H_ */
diff --git a/drivers/staging/b3dfg/b3dfg.c b/drivers/staging/b3dfg/b3dfg.c
index 94c5d27d24d7..cda26bb493b3 100644
--- a/drivers/staging/b3dfg/b3dfg.c
+++ b/drivers/staging/b3dfg/b3dfg.c
@@ -36,6 +36,7 @@
 #include <linux/wait.h>
 #include <linux/mm.h>
 #include <linux/uaccess.h>
+#include <linux/sched.h>
 
 static unsigned int b3dfg_nbuf = 2;
 
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index af723cb9d08f..d63c889ce557 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -1,7 +1,7 @@
 config COMEDI
 	tristate "Data acquisition support (comedi)"
 	default N
-	depends on m
+	depends on m && (PCI || PCMCIA || PCCARD || USB)
 	---help---
 	  Enable support a wide range of data acquisition devices
 	  for Linux.
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index f54bb9b3ee37..aaad76e0a76a 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -2337,7 +2337,7 @@ static int resize_async_buffer(struct comedi_device *dev,
 	}
 
 	DPRINTK("comedi%i subd %d buffer resized to %i bytes\n",
-		dev->minor, s - dev->subdevices, async->prealloc_bufsz);
+		dev->minor, (int)(s - dev->subdevices), async->prealloc_bufsz);
 	return 0;
 }
 
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 12d12b43a6f1..80c0df8656f3 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -744,7 +744,7 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
 
 	/* Initialize the pcmcia_device structure */
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
diff --git a/drivers/staging/comedi/drivers/cb_pcidio.c b/drivers/staging/comedi/drivers/cb_pcidio.c
index 4d10bc31d461..09e6e3bdfb3e 100644
--- a/drivers/staging/comedi/drivers/cb_pcidio.c
+++ b/drivers/staging/comedi/drivers/cb_pcidio.c
@@ -53,7 +53,8 @@ Passing a zero for an option is the same as leaving it unspecified.
  * Some drivers use arrays such as this, other do not.
  */
 struct pcidio_board {
-	const char *name;	/*  anme of the board */
+	const char *name;	/*  name of the board */
+	int dev_id;
 	int n_8255;		/*  number of 8255 chips on board */
 
 	/*  indices of base address regions */
@@ -64,18 +65,21 @@ struct pcidio_board {
 static const struct pcidio_board pcidio_boards[] = {
 	{
 	 .name = "pci-dio24",
+	 .dev_id = 0x0028,
 	 .n_8255 = 1,
 	 .pcicontroler_badrindex = 1,
 	 .dioregs_badrindex = 2,
 	 },
 	{
 	 .name = "pci-dio24h",
+	 .dev_id = 0x0014,
 	 .n_8255 = 1,
 	 .pcicontroler_badrindex = 1,
 	 .dioregs_badrindex = 2,
 	 },
 	{
 	 .name = "pci-dio48h",
+	 .dev_id = 0x000b,
 	 .n_8255 = 2,
 	 .pcicontroler_badrindex = 0,
 	 .dioregs_badrindex = 1,
@@ -206,7 +210,7 @@ static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			continue;
 		/*  loop through cards supported by this driver */
 		for (index = 0; index < ARRAY_SIZE(pcidio_boards); index++) {
-			if (pcidio_pci_table[index].device != pcidev->device)
+			if (pcidio_boards[index].dev_id != pcidev->device)
 				continue;
 
 			/*  was a particular bus/slot requested? */
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index 14bf29bf5781..0d2c2eb23b23 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -515,6 +515,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice *s)
 {
 	struct poll_delay_t result = poll_delay_min_max(1000, 2000);
 	struct jr3_pci_subdev_private *p = s->private;
+	int i;
 
 	if (p) {
 		volatile struct jr3_channel *channel = p->channel;
@@ -570,18 +571,11 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice *s)
 					       p->serial_no);
 
 					/*  Transformation all zeros */
-					transf.link[0].link_type =
-					    (enum link_types)0;
-					transf.link[0].link_amount = 0;
-					transf.link[1].link_type =
-					    (enum link_types)0;
-					transf.link[1].link_amount = 0;
-					transf.link[2].link_type =
-					    (enum link_types)0;
-					transf.link[2].link_amount = 0;
-					transf.link[3].link_type =
-					    (enum link_types)0;
-					transf.link[3].link_amount = 0;
+					for (i = 0; i < ARRAY_SIZE(transf.link); i++) {
+						transf.link[i].link_type =
+							(enum link_types)0;
+						transf.link[i].link_amount = 0;
+					}
 
 					set_transforms(channel, transf, 0);
 					use_transform(channel, 0);
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index 2cda7ad1d32f..80e192d2e77e 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -51,6 +51,7 @@ from http://www.comedi.org
 */
 
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include "../comedidev.h"
 
 #include "comedi_pci.h"
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 6b118c15b49e..bbf75eb6d7f2 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -418,15 +418,15 @@ static int ni_65xx_dio_insn_bits(struct comedi_device *dev,
 		return -EINVAL;
 	base_bitfield_channel = CR_CHAN(insn->chanspec);
 	for (j = 0; j < max_ports_per_bitfield; ++j) {
+		const unsigned port_offset = ni_65xx_port_by_channel(base_bitfield_channel) + j;
 		const unsigned port =
-		    sprivate(s)->base_port +
-		    ni_65xx_port_by_channel(base_bitfield_channel) + j;
+		    sprivate(s)->base_port + port_offset;
 		unsigned base_port_channel;
 		unsigned port_mask, port_data, port_read_bits;
 		int bitshift;
 		if (port >= ni_65xx_total_num_ports(board(dev)))
 			break;
-		base_port_channel = port * ni_65xx_channels_per_port;
+		base_port_channel = port_offset * ni_65xx_channels_per_port;
 		port_mask = data[0];
 		port_data = data[1];
 		bitshift = base_port_channel - base_bitfield_channel;
@@ -457,6 +457,12 @@ static int ni_65xx_dio_insn_bits(struct comedi_device *dev,
 		port_read_bits =
 		    readb(private(dev)->mite->daq_io_addr + Port_Data(port));
 /* printk("read 0x%x from port %i\n", port_read_bits, port); */
+		if (s->type == COMEDI_SUBD_DO && board(dev)->invert_outputs) {
+			/* Outputs inverted, so invert value read back from
+			 * DO subdevice.  (Does not apply to boards with DIO
+			 * subdevice.) */
+			port_read_bits ^= 0xFF;
+		}
 		if (bitshift > 0) {
 			port_read_bits <<= bitshift;
 		} else {
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 6a7797604c97..ec31a3970664 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -520,7 +520,7 @@ static int dio700_cs_attach(struct pcmcia_device *link)
 	link->priv = local;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index b06e81c526e8..0700a8bddd1e 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -271,7 +271,7 @@ static int dio24_cs_attach(struct pcmcia_device *link)
 	link->priv = local;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 57aecfa883c7..a3053b8da1c6 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -246,7 +246,7 @@ static int labpc_cs_attach(struct pcmcia_device *link)
 	link->priv = local;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_FORCED_PULSE;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FORCED_PULSE;
 	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_PULSE_ID;
 	link->irq.Handler = NULL;
 
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index e3ffb067ead1..753ee0512342 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -62,6 +62,7 @@
 /* #define DEBUG_STATUS_B */
 
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include "8255.h"
 #include "mite.h"
 #include "comedi_fc.h"
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index b7322963cf78..9aef87fc81dc 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -273,7 +273,7 @@ static int cs_attach(struct pcmcia_device *link)
 {
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
 	link->io.NumPorts1 = 16;
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index 52b2eca9e73d..d544698f2414 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -70,6 +70,7 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
 /* #define DEBUG_FLAGS */
 
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include "../comedidev.h"
 
 #include "mite.h"
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index 19d87553d906..24c8b8ed5b4c 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -29,7 +29,7 @@ Devices: [National Instruments] PCI-MIO-16XE-50 (ni_pcimio),
   PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, PCI-MIO-16E-4, PCI-6014, PCI-6040E,
   PXI-6040E, PCI-6030E, PCI-6031E, PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E,
   PCI-6024E, PCI-6025E, PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E,
-  PCI-6110, PCI-6111, PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225,
+  PCI-6110, PCI-6111, PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225,
   PCI-6229, PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
   PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289,
   PCI-6711, PXI-6711, PCI-6713, PXI-6713,
@@ -179,6 +179,7 @@ static DEFINE_PCI_DEVICE_TABLE(ni_pci_table) = {
 	PCI_VENDOR_ID_NATINST, 0x70f2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_NATINST, 0x710d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_NATINST, 0x716c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
+	PCI_VENDOR_ID_NATINST, 0x716d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_NATINST, 0x717f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_NATINST, 0x71bc, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_NATINST, 0x717d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
@@ -953,6 +954,25 @@ static const struct ni_board_struct ni_boards[] = {
 	 .has_8255 = 0,
 	 },
 	{
+	 .device_id = 0x716d,
+	 .name = "pxi-6225",
+	 .n_adchan = 80,
+	 .adbits = 16,
+	 .ai_fifo_depth = 4095,
+	 .gainlkup = ai_gain_622x,
+	 .ai_speed = 4000,
+	 .n_aochan = 2,
+	 .aobits = 16,
+	 .ao_fifo_depth = 8191,
+	 .ao_range_table = &range_ni_M_622x_ao,
+	 .reg_type = ni_reg_622x,
+	 .ao_unipolar = 0,
+	 .ao_speed = 1200,
+	 .num_p0_dio_channels = 32,
+	 .caldac = {caldac_none},
+	 .has_8255 = 0,
+	},
+	{
 	 .device_id = 0x70aa,
 	 .name = "pci-6229",
 	 .n_adchan = 32,
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index f63bdc35cffd..344b82353e08 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -1079,7 +1079,7 @@ static int daqp_cs_attach(struct pcmcia_device *link)
 	link->priv = local;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = daqp_interrupt;
 	link->irq.Instance = local;
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index b89e1ec267c5..07c21e686f27 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -43,6 +43,7 @@ comedi_config /dev/comedi0 s526 0x2C0,0x3
 
 #include "../comedidev.h"
 #include <linux/ioport.h>
+#include <asm/byteorder.h>
 
 #define S526_SIZE 64
 
@@ -113,6 +114,7 @@ static const int s526_ports[] = {
 };
 
 struct counter_mode_register_t {
+#if defined (__LITTLE_ENDIAN_BITFIELD)
 	unsigned short coutSource:1;
 	unsigned short coutPolarity:1;
 	unsigned short autoLoadResetRcap:3;
@@ -124,12 +126,27 @@ struct counter_mode_register_t {
 	unsigned short outputRegLatchCtrl:1;
 	unsigned short preloadRegSel:1;
 	unsigned short reserved:1;
+ #elif defined(__BIG_ENDIAN_BITFIELD)
+	unsigned short reserved:1;
+	unsigned short preloadRegSel:1;
+	unsigned short outputRegLatchCtrl:1;
+	unsigned short countDirCtrl:1;
+	unsigned short countDir:1;
+	unsigned short clockSource:2;
+	unsigned short ctEnableCtrl:2;
+	unsigned short hwCtEnableSource:2;
+	unsigned short autoLoadResetRcap:3;
+	unsigned short coutPolarity:1;
+	unsigned short coutSource:1;
+#else
+#error Unknown bit field order
+#endif
 };
 
-union {
+union cmReg {
 	struct counter_mode_register_t reg;
 	unsigned short value;
-} cmReg;
+};
 
 #define MAX_GPCT_CONFIG_DATA 6
 
@@ -285,6 +302,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	int i, n;
 /* short value; */
 /* int subdev_channel = 0; */
+	union cmReg cmReg;
 
 	printk("comedi%d: s526: ", dev->minor);
 
@@ -375,7 +393,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	if (thisboard->have_dio) {
 		s->type = COMEDI_SUBD_DIO;
 		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->n_chan = 2;
+		s->n_chan = 8;
 		s->maxdata = 1;
 		s->range_table = &range_digital;
 		s->insn_bits = s526_dio_insn_bits;
@@ -435,11 +453,11 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	udelay(1000);
 	printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n)));
 
-	/*  Load the pre-laod register high word */
+	/*  Load the pre-load register high word */
 /* value = (short) (0x55); */
 /* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */
 
-	/*  Load the pre-laod register low word */
+	/*  Load the pre-load register low word */
 /* value = (short)(0xaa55); */
 /* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */
 
@@ -516,6 +534,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
 	int subdev_channel = CR_CHAN(insn->chanspec);	/*  Unpack chanspec */
 	int i;
 	short value;
+	union cmReg cmReg;
 
 /* printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel); */
 
@@ -568,19 +587,8 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
 
 #if 1
 		/*  Set Counter Mode Register */
-		cmReg.reg.coutSource = 0;	/*  out RCAP */
-		cmReg.reg.coutPolarity = 0;	/*  Polarity inverted */
-		cmReg.reg.autoLoadResetRcap = 0;	/*  Auto load disabled */
-		cmReg.reg.hwCtEnableSource = 2;	/*  NOT RCAP */
-		cmReg.reg.ctEnableCtrl = 1;	/*  1: Software,  >1 : Hardware */
-		cmReg.reg.clockSource = 3;	/*  x4 */
-		cmReg.reg.countDir = 0;	/*  up */
-		cmReg.reg.countDirCtrl = 0;	/*  quadrature */
-		cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
-		cmReg.reg.preloadRegSel = 0;	/*  PR0 */
-		cmReg.reg.reserved = 0;
+		cmReg.value = insn->data[1] & 0xFFFF;
 
-		/*  Set Counter Mode Register */
 /* printk("s526: Counter Mode register=%x\n", cmReg.value); */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
@@ -615,11 +623,11 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
 		cmReg.value = (short)(insn->data[1] & 0xFFFF);
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		/*  Load the pre-laod register high word */
+		/*  Load the pre-load register high word */
 		value = (short)((insn->data[2] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		/*  Load the pre-laod register low word */
+		/*  Load the pre-load register low word */
 		value = (short)(insn->data[2] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
@@ -653,11 +661,11 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
 		cmReg.reg.preloadRegSel = 0;	/*  PR0 */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		/*  Load the pre-laod register 0 high word */
+		/*  Load the pre-load register 0 high word */
 		value = (short)((insn->data[2] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		/*  Load the pre-laod register 0 low word */
+		/*  Load the pre-load register 0 low word */
 		value = (short)(insn->data[2] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
@@ -666,17 +674,17 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
 		cmReg.reg.preloadRegSel = 1;	/*  PR1 */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		/*  Load the pre-laod register 1 high word */
+		/*  Load the pre-load register 1 high word */
 		value = (short)((insn->data[3] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		/*  Load the pre-laod register 1 low word */
+		/*  Load the pre-load register 1 low word */
 		value = (short)(insn->data[3] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
 		/*  Write the Counter Control Register */
-		if (insn->data[3] != 0) {
-			value = (short)(insn->data[3] & 0xFFFF);
+		if (insn->data[4] != 0) {
+			value = (short)(insn->data[4] & 0xFFFF);
 			outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
 		}
 		break;
@@ -698,11 +706,11 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
 		cmReg.reg.preloadRegSel = 0;	/*  PR0 */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		/*  Load the pre-laod register 0 high word */
+		/*  Load the pre-load register 0 high word */
 		value = (short)((insn->data[2] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		/*  Load the pre-laod register 0 low word */
+		/*  Load the pre-load register 0 low word */
 		value = (short)(insn->data[2] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
@@ -711,17 +719,17 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
 		cmReg.reg.preloadRegSel = 1;	/*  PR1 */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		/*  Load the pre-laod register 1 high word */
+		/*  Load the pre-load register 1 high word */
 		value = (short)((insn->data[3] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		/*  Load the pre-laod register 1 low word */
+		/*  Load the pre-load register 1 low word */
 		value = (short)(insn->data[3] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
 		/*  Write the Counter Control Register */
-		if (insn->data[3] != 0) {
-			value = (short)(insn->data[3] & 0xFFFF);
+		if (insn->data[4] != 0) {
+			value = (short)(insn->data[4] & 0xFFFF);
 			outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
 		}
 		break;
@@ -741,6 +749,7 @@ static int s526_gpct_winsn(struct comedi_device *dev,
 {
 	int subdev_channel = CR_CHAN(insn->chanspec);	/*  Unpack chanspec */
 	short value;
+	union cmReg cmReg;
 
 	printk("s526: GPCT_INSN_WRITE on channel %d\n", subdev_channel);
 	cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel));
@@ -775,9 +784,8 @@ static int s526_gpct_winsn(struct comedi_device *dev,
 			(devpriv->s526_gpct_config[subdev_channel]).data[1] =
 			    insn->data[1];
 		} else {
-			printk("%d \t %d\n", insn->data[1], insn->data[2]);
-			printk
-			    ("s526: INSN_WRITE: PTG: Problem with Pulse params\n");
+			printk("s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
+				insn->data[0], insn->data[1]);
 			return -EINVAL;
 		}
 
@@ -949,7 +957,7 @@ static int s526_dio_insn_bits(struct comedi_device *dev,
 	data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF;	/*  low 8 bits are the data */
 	/* or we could just return the software copy of the output values if
 	 * it was a purely digital output subdevice */
-	/* data[1]=s->state; */
+	/* data[1]=s->state & 0xFF; */
 
 	return 2;
 }
@@ -959,28 +967,33 @@ static int s526_dio_insn_config(struct comedi_device *dev,
 				struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
-	short value;
+	int group, mask;
 
 	printk("S526 DIO insn_config\n");
 
-	if (insn->n != 1)
-		return -EINVAL;
-
-	value = inw(ADDR_REG(REG_DIO));
-
 	/* The input or output configuration of each digital line is
 	 * configured by a special insn_config instruction.  chanspec
 	 * contains the channel to be changed, and data[0] contains the
 	 * value COMEDI_INPUT or COMEDI_OUTPUT. */
 
-	if (data[0] == COMEDI_OUTPUT) {
-		value |= 1 << (chan + 10);	/*  bit 10/11 set the group 1/2's mode */
-		s->io_bits |= (0xF << chan);
-	} else {
-		value &= ~(1 << (chan + 10));	/*  1 is output, 0 is input. */
-		s->io_bits &= ~(0xF << chan);
+	group = chan >> 2;
+	mask = 0xF << (group << 2);
+	switch (data[0]) {
+	case INSN_CONFIG_DIO_OUTPUT:
+		s->state |= 1 << (group + 10);  // bit 10/11 set the group 1/2's mode
+		s->io_bits |= mask;
+		break;
+	case INSN_CONFIG_DIO_INPUT:
+		s->state &= ~(1 << (group + 10));// 1 is output, 0 is input.
+		s->io_bits &= ~mask;
+		break;
+	case INSN_CONFIG_DIO_QUERY:
+		data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
+		return insn->n;
+	default:
+		return -EINVAL;
 	}
-	outw(value, ADDR_REG(REG_DIO));
+	outw(s->state, ADDR_REG(REG_DIO));
 
 	return 1;
 }
diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
index a21967983942..82aa86e718b2 100644
--- a/drivers/staging/comedi/drivers/serial2002.c
+++ b/drivers/staging/comedi/drivers/serial2002.c
@@ -35,6 +35,7 @@ Status: in development
 
 #include <linux/delay.h>
 #include <linux/ioport.h>
+#include <linux/sched.h>
 
 #include <asm/termios.h>
 #include <asm/ioctls.h>
diff --git a/drivers/staging/cowloop/Kconfig b/drivers/staging/cowloop/Kconfig
deleted file mode 100644
index 58d2a23bd2c1..000000000000
--- a/drivers/staging/cowloop/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-config COWLOOP
-	tristate "copy-on-write pseudo Block Driver"
-	depends on BLOCK
-	default n
-	---help---
-	  Cowloop is a "copy-on-write" pseudo block driver. It can be
-	  stacked on top of a "real" block driver, and catches all write
-	  operations on their way from the file systems layer above to
-	  the real driver below, effectively shielding the lower driver
-	  from those write accesses. The requests are then diverted to
-	  an ordinary file, located somewhere else (configurable). Later
-	  read requests are checked to see whether they can be serviced
-	  by the "real" block driver below, or must be pulled in from
-	  the diverted location. More information and userspace tools to
-	  use the driver are on the project's website
-	  http://www.ATComputing.nl/cowloop/
diff --git a/drivers/staging/cowloop/Makefile b/drivers/staging/cowloop/Makefile
deleted file mode 100644
index 2b6b81a63d21..000000000000
--- a/drivers/staging/cowloop/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_COWLOOP)	+= cowloop.o
diff --git a/drivers/staging/cowloop/TODO b/drivers/staging/cowloop/TODO
deleted file mode 100644
index 9399d1c16e15..000000000000
--- a/drivers/staging/cowloop/TODO
+++ /dev/null
@@ -1,11 +0,0 @@
-TODO:
-	- checkpatch.pl cleanups
-	- run sparse to ensure clean
-	- fix up 32/64bit ioctl issues
-	- move proc file usage to debugfs
-	- audit ioctls
-	- add documentation
-	- get linux-fsdevel to review it
-
-Please send patches to "H.J. Thomassen" <hjt@ATComputing.nl> and
-Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/cowloop/cowloop.c b/drivers/staging/cowloop/cowloop.c
deleted file mode 100644
index a71c743a1196..000000000000
--- a/drivers/staging/cowloop/cowloop.c
+++ /dev/null
@@ -1,2842 +0,0 @@
-/*
-**       COWLOOP block device driver (2.6 kernel compliant)
-** =======================================================================
-** Read-write loop-driver with copy-on-write functionality.
-**
-** Synopsis:
-**
-**     modprobe cowloop [maxcows=..] [rdofile=..... cowfile=.... [option=r]]
-**
-** Definition of number of configured cowdevices:
-**   maxcows=	number of configured cowdevices (default: 16)
-** (do not confuse this with MAXCOWS: absolute maximum as compiled)
-**
-** One pair of filenames can be supplied during insmod/modprobe to open
-** the first cowdevice:
-**   rdofile=	read-only file (or filesystem)
-**   cowfile=	storage-space for modified blocks of read-only file(system)
-**   option=r	repair cowfile automatically if it appears to be dirty
-**
-** Other cowdevices can be activated via the command "cowdev"
-** whenever the cowloop-driver is loaded.
-**
-** The read-only file may be of type 'regular' or 'block-device'.
-**
-** The cowfile must be of type 'regular'.
-** If an existing regular file is used as cowfile, its contents will be
-** used again for the current read-only file. When the cowfile has not been
-** closed properly during a previous session (i.e. rmmod cowloop), the
-** cowloop-driver refuses to open it unless the parameter "option=r" is
-** specified.
-**
-** Layout of cowfile:
-**
-** 	+-----------------------------+
-**	|       cow head block        |   MAPUNIT bytes
-**	|-----------------------------|
-**	|                             |   MAPUNIT bytes
-**	|---                       ---|
-**	|                             |   MAPUNIT bytes
-**	|---                       ---|
-**	|      used-block bitmap      |   MAPUNIT bytes
-**	|-----------------------------|
-**	|  gap to align start-offset  |
-**	|        to 4K multiple       |
-**	|-----------------------------|  <---- start-offset cow blocks
-**	|                             |
-**      |    written cow blocks       |   MAPUNIT bytes
-**      |          .....              |
-**
-** 	cowhead block:
-**   	  - contains general info about the rdofile which is related
-** 	    to this cowfile
-**
-** 	used-block bitmap:
-** 	  - contains one bit per block with a size of MAPUNIT bytes
-** 	  - bit-value '1' = block has been written on cow
-** 	              '0' = block unused on cow
-** 	  - total bitmap rounded to multiples of MAPUNIT
-**
-** ============================================================================
-** Author:             Gerlof Langeveld - AT Computing (March 2003)
-** Current maintainer: Hendrik-Jan Thomassen - AT Computing (Summer 2006)
-** Email:              hjt@ATComputing.nl
-** ----------------------------------------------------------------------------
-** Copyright (C) 2003-2009 AT Consultancy
-**
-** This program is free software; you can redistribute it and/or modify it
-** under the terms of the GNU General Public License as published by the
-** Free Software Foundation; either version 2, or (at your option) any
-** later version.
-**
-** This program is distributed in the hope that it will be useful, but
-** WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-** See the GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-** ----------------------------------------------------------------------------
-**
-** Major modifications:
-**
-** 	200405	Ported to kernel-version 2.6		Hendrik-Jan Thomassen
-**	200405	Added cowhead to cowfile to garantee
-**		consistency with read-only file		Gerlof Langeveld
-**	200405	Postponed flushing of bitmaps to improve
-**		performance. 				Gerlof Langeveld
-**	200405	Inline recovery for dirty cowfiles.	Gerlof Langeveld
-**	200502	Redesign to support more cowdevices.	Gerlof Langeveld
-**	200502	Support devices/file > 2 Gbytes.	Gerlof Langeveld
-**	200507	Check for free space to expand cowfile.	Gerlof Langeveld
-**	200902  Upgrade for kernel 2.6.28               Hendrik-Jan Thomassen
-**
-** Inspired by
-**    loop.c  by Theodore Ts'o and
-**    cloop.c by Paul `Rusty' Russell & Klaus Knopper.
-**
-** Design-considerations:
-**
-**   For the first experiments with the cowloop-driver, the request-queue
-**   made use of the do_generic_file_read() which worked fine except
-**   in combination with the cloop-driver; that combination
-**   resulted in a non-interruptible hangup of the system during
-**   heavy load. Other experiments using the `make_request' interface also
-**   resulted in unpredictable system hangups (with proper use of spinlocks).
-**
-**   To overcome these problems, the cowloop-driver starts a kernel-thread
-**   for every active cowdevice.
-**   All read- and write-request on the read-only file and copy-on-write file
-**   are handled in the context of that thread.
-**   A scheme has been designed to wakeup the kernel-thread as
-**   soon as I/O-requests are available in the request-queue; this thread
-**   handles the requests one-by-one by calling the proper read- or
-**   write-function related to the open read-only file or copy-on-write file.
-**   When all pending requests have been handled, the kernel-thread goes
-**   back to sleep-state.
-**   This approach requires some additional context-switches; however the
-**   performance loss during heavy I/O is less than 3%.
-**
-** -------------------------------------------------------------------------*/
-/* The following is the cowloop package version number. It must be
-   identical to the content of the include-file "version.h" that is
-   used in all supporting utilities:                                  */
-char revision[] = "$Revision: 3.1 $"; /* cowlo_init_module() has
-			     assumptions about this string's format   */
-
-/* Note that the following numbers are *not* the cowloop package version
-   numbers, but separate revision history numbers to track the
-   modifications of this particular source file:                      */
-/* $Log: cowloop.c,v $
-**
-** Revision 1.30  2009/02/08 hjt
-** Integrated earlier fixes
-** Upgraded to kernel 2.6.28 (thanks Jerome Poulin)
-**
-** Revision 1.29  2006/12/03 22:12:00  hjt
-** changed 'cowdevlock' from spinlock to semaphore, to avoid
-** "scheduling while atomic". Contributed by Juergen Christ.
-** Added version.h again
-**
-** Revision 1.28  2006/08/16 16:00:00  hjt
-** malloc each individual cowloopdevice struct separately
-**
-** Revision 1.27  2006/03/14 14:57:03  root
-** Removed include version.h
-**
-** Revision 1.26  2005/08/08 11:22:48  root
-** Implement possibility to close a cow file or reopen a cowfile read-only.
-**
-** Revision 1.25  2005/08/03 14:00:39  root
-** Added modinfo info to driver.
-**
-** Revision 1.24  2005/07/21 06:14:53  root
-** Cosmetic changes source code.
-**
-** Revision 1.23  2005/07/20 13:07:32  root
-** Supply ioctl to write watchdog program to react on lack of cowfile space.
-**
-** Revision 1.22  2005/07/20 07:53:34  root
-** Regular verification of free space in filesystem holding the cowfile
-** (give warnings whenever space is almost exhausted).
-** Terminology change: checksum renamed to fingerprint.
-**
-** Revision 1.21  2005/07/19 09:21:52  root
-** Removing maximum limit of 16 Gb per cowdevice.
-**
-** Revision 1.20  2005/07/19 07:50:33  root
-** Minor bugfixes and cosmetic changes.
-**
-** Revision 1.19  2005/06/10 12:29:55  root
-** Removed lock/unlock operation from cowlo_open().
-**
-** Revision 1.18  2005/05/09 12:56:26  root
-** Allow a cowdevice to be open more than once
-** (needed for support of ReiserFS and XFS).
-**
-** Revision 1.17  2005/03/17 14:36:16  root
-** Fixed some license issues.
-**
-** Revision 1.16  2005/03/07 14:42:05  root
-** Only allow one parallel open per cowdevice.
-**
-** Revision 1.15  2005/02/18 11:52:04  gerlof
-** Redesign to support more than one cowdevice > 2 Gb space.
-**
-** Revision 1.14  2004/08/17 14:19:16  gerlof
-** Modified output of /proc/cowloop.
-**
-** Revision 1.13  2004/08/16 07:21:10  gerlof
-** Separate statistical counter for read on rdofile and cowfile.
-**
-** Revision 1.12  2004/08/11 06:52:11  gerlof
-** Modified messages.
-**
-** Revision 1.11  2004/08/11 06:44:11  gerlof
-** Modified log messages.
-**
-** Revision 1.10  2004/08/10 12:27:27  gerlof
-** Cosmetic changes.
-**
-** Revision 1.9  2004/08/09 11:43:37  gerlof
-** Removed double definition of major number (COWMAJOR).
-**
-** Revision 1.8  2004/08/09 08:03:39  gerlof
-** Cleanup of messages.
-**
-** Revision 1.7  2004/05/27 06:37:33  gerlof
-** Modified /proc message.
-**
-** Revision 1.6  2004/05/26 21:23:28  gerlof
-** Modified /proc output.
-**
-** Revision 1.5  2004/05/26 13:23:34  gerlof
-** Support cowsync to force flushing the bitmaps and cowhead.
-**
-** Revision 1.4  2004/05/26 11:11:10  gerlof
-** Updated the comment to the actual situation.
-**
-** Revision 1.3  2004/05/26 10:50:00  gerlof
-** Implemented recovery-option.
-**
-** Revision 1.2  2004/05/25 15:14:41  gerlof
-** Modified bitmap flushing strategy.
-**
-*/
-
-#define COWMAJOR	241
-
-// #define COWDEBUG
-
-#ifdef 	COWDEBUG
-#define DEBUGP		printk
-#define DCOW		KERN_ALERT
-#else
-#define DEBUGP(format, x...)
-#endif
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#ifndef AUTOCONF_INCLUDED
-#include <linux/config.h>
-#endif
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/stat.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/semaphore.h>
-#include <asm/uaccess.h>
-#include <linux/proc_fs.h>
-#include <linux/blkdev.h>
-#include <linux/buffer_head.h>
-#include <linux/hdreg.h>
-#include <linux/genhd.h>
-#include <linux/statfs.h>
-
-#include "cowloop.h"
-
-MODULE_LICENSE("GPL");
-/* MODULE_AUTHOR("Gerlof Langeveld <gerlof@ATComputing.nl>");     obsolete address */
-MODULE_AUTHOR("Hendrik-Jan Thomassen <hjt@ATComputing.nl>"); /* current maintainer */
-MODULE_DESCRIPTION("Copy-on-write loop driver");
-MODULE_PARM_DESC(maxcows, " Number of configured cowdevices (default 16)");
-MODULE_PARM_DESC(rdofile, " Read-only file for /dev/cow/0");
-MODULE_PARM_DESC(cowfile, " Cowfile for /dev/cow/0");
-MODULE_PARM_DESC(option, "  Repair cowfile if inconsistent: option=r");
-
-#define DEVICE_NAME	"cow"
-
-#define	DFLCOWS		16		/* default cowloop devices	*/
-
-static int maxcows = DFLCOWS;
-module_param(maxcows, int, 0);
-static char *rdofile = "";
-module_param(rdofile, charp, 0);
-static char *cowfile = "";
-module_param(cowfile, charp, 0);
-static char *option = "";
-module_param(option, charp, 0);
-
-/*
-** per cowdevice several bitmap chunks are allowed of MAPCHUNKSZ each
-**
-** each bitmap chunk can describe MAPCHUNKSZ * 8 * MAPUNIT bytes of data
-** suppose:
-**	MAPCHUNKSZ 4096 and MAPUNIT 1024 --> 4096 * 8 * 1024 = 32 Mb per chunk
-*/
-#define	MAPCHUNKSZ	4096	/* #bytes per bitmap chunk  (do not change)  */
-
-#define SPCMINBLK	100	/* space threshold to give warning messages  */
-#define SPCDFLINTVL	16	/* once every SPCDFLINTVL writes to cowfile, */
-				/* available space in filesystem is checked  */
-
-#define	CALCMAP(x)	((x)/(MAPCHUNKSZ*8))
-#define	CALCBYTE(x)	(((x)%(MAPCHUNKSZ*8))>>3)
-#define	CALCBIT(x)	((x)&7)
-
-#define ALLCOW		1
-#define ALLRDO		2
-#define MIXEDUP		3
-
-static char	allzeroes[MAPUNIT];
-
-/*
-** administration per cowdevice (pair of cowfile/rdofile)
-*/
-
-/* bit-values for state */
-#define	COWDEVOPEN	0x01	/* cowdevice opened                          */
-#define	COWRWCOWOPEN	0x02	/* cowfile opened read-write                 */
-#define	COWRDCOWOPEN	0x04	/* cowfile opened read-only                  */
-#define	COWWATCHDOG	0x08 	/* ioctl for watchdog cowfile space active   */
-
-#define	COWCOWOPEN	(COWRWCOWOPEN|COWRDCOWOPEN)
-
-struct cowloop_device
-{
-	/*
-	** current status
-	*/
-	int		state;			/* bit-values (see above)    */
-	int		opencnt;		/* # opens for cowdevice     */
-
-        /*
-	** open file pointers
-	*/
-        struct file  	*rdofp,   *cowfp;	/* open file pointers        */
-	char		*rdoname, *cowname;	/* file names                */
-
-	/*
-	** request queue administration
-	*/
-	struct request_queue	*rqueue;
-	spinlock_t		rqlock;
-	struct gendisk		*gd;
-
-	/*
-	** administration about read-only file
-	*/
-	unsigned int	     numblocks;	/* # blocks input file in MAPUNIT    */
-	unsigned int	     blocksz;   /* minimum unit to access this dev   */
-	unsigned long	     fingerprint; /* fingerprint of current rdofile  */
-	struct block_device  *belowdev;	/* block device below us             */
-	struct gendisk       *belowgd;  /* gendisk for blk dev below us      */
-	struct request_queue *belowq;	/* req. queue of blk dev below us    */
-
-	/*
-	** bitmap administration to register which blocks are modified
-	*/
-	long int	mapsize;	/* total size of bitmap (bytes)      */
-	long int	mapremain;	/* remaining bytes in last bitmap    */
-	int		mapcount;       /* number of bitmaps in use          */
-	char 		**mapcache;	/* area with pointers to bitmaps     */
-
-	char		*iobuf;		/* databuffer of MAPUNIT bytes       */
-	struct cowhead	*cowhead;	/* buffer containing cowhead         */
-
-	/*
-	** administration for interface with the kernel-thread
-	*/
-	int		pid;		/* pid==0: no thread available       */
-	struct request	*req;		/* request to be handled now         */
-	wait_queue_head_t waitq;	/* wait-Q: thread waits for work     */
-	char		closedown;	/* boolean: thread exit required     */
-	char		qfilled;	/* boolean: I/O request pending      */
-	char		iobusy;		/* boolean: req under treatment      */
-
-	/*
-	** administration to keep track of free space in cowfile filesystem
-	*/
-	unsigned long	blksize;	/* block size of fs (bytes)          */
-	unsigned long	blktotal;	/* recent total space in fs (blocks) */
-	unsigned long	blkavail;	/* recent free  space in fs (blocks) */
-
-	wait_queue_head_t watchq;	/* wait-Q: watcher awaits threshold  */
-	unsigned long	watchthresh;	/* threshold of watcher (blocks)     */
-
-	/*
-	** statistical counters
-	*/
-	unsigned long	rdoreads;	/* number of  read-actions rdo       */
-	unsigned long	cowreads;	/* number of  read-actions cow       */
-	unsigned long	cowwrites;	/* number of write-actions           */
-	unsigned long	nrcowblocks;	/* number of blocks in use on cow    */
-};
-
-static struct cowloop_device	**cowdevall;	/* ptr to ptrs to all cowdevices */
-static struct semaphore 	cowdevlock;	/* generic lock for cowdevs      */
-
-static struct gendisk		*cowctlgd;	/* gendisk control channel       */
-static spinlock_t		cowctlrqlock;   /* for req.q. of ctrl. channel   */
-
-/*
-** private directory /proc/cow
-*/
-struct proc_dir_entry	*cowlo_procdir;
-
-/*
-** function prototypes
-*/
-static long int cowlo_do_request (struct request *req);
-static void	cowlo_sync       (void);
-static int	cowlo_checkio    (struct cowloop_device *,         int, loff_t);
-static int	cowlo_readmix    (struct cowloop_device *, void *, int, loff_t);
-static int	cowlo_writemix   (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_readrdo    (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_readcow    (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_readcowraw (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_writecow   (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_writecowraw(struct cowloop_device *, void *, int, loff_t);
-static int      cowlo_ioctl      (struct block_device *, fmode_t,
-           			 		unsigned int, unsigned long);
-static int	cowlo_makepair    (struct cowpair __user *);
-static int	cowlo_removepair  (unsigned long  __user *);
-static int	cowlo_watch       (struct cowpair __user *);
-static int	cowlo_cowctl      (unsigned long  __user *, int);
-static int	cowlo_openpair    (char *, char *, int, int);
-static int 	cowlo_closepair   (struct cowloop_device *);
-static int	cowlo_openrdo     (struct cowloop_device *, char *);
-static int	cowlo_opencow     (struct cowloop_device *, char *, int);
-static void	cowlo_undo_openrdo(struct cowloop_device *);
-static void	cowlo_undo_opencow(struct cowloop_device *);
-
-/*****************************************************************************/
-/* System call handling                                                      */
-/*****************************************************************************/
-
-/*
-** handle system call open()/mount()
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int cowlo_open(struct block_device *bdev, fmode_t mode)
-{
-	struct inode *inode = bdev->bd_inode;
-
-	if (!inode)
-		return -EINVAL;
-
-	if (imajor(inode) != COWMAJOR) {
-		printk(KERN_WARNING
-		       "cowloop - unexpected major %d\n", imajor(inode));
-		return -ENODEV;
-	}
-
-	switch (iminor(inode)) {
-	   case COWCTL:
-		DEBUGP(DCOW"cowloop - open %d control\n", COWCTL);
-		break;
-
-	   default:
-		DEBUGP(DCOW"cowloop - open minor %d\n", iminor(inode));
-
-		if ( iminor(inode) >= maxcows )
-			return -ENODEV;
-
-		if ( !((cowdevall[iminor(inode)])->state & COWDEVOPEN) )
-			return -ENODEV;
-
-		(cowdevall[iminor(inode)])->opencnt++;
-	}
-
-	return 0;
-}
-
-/*
-** handle system call close()/umount()
-**
-** returns:
-** 	0   - okay
-*/
-static int cowlo_release(struct gendisk *gd, fmode_t mode)
-{
-	struct block_device *bdev;
-	struct inode *inode;
-
-	bdev = bdget_disk(gd, 0);
-	inode = bdev->bd_inode;
-	if (!inode)
-		return 0;
-
-	DEBUGP(DCOW"cowloop - release (close) minor %d\n", iminor(inode));
-
-	if ( iminor(inode) != COWCTL)
-		(cowdevall[iminor(inode)])->opencnt--;
-
-	return 0;
-}
-
-/*
-** handle system call ioctl()
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int cowlo_ioctl(struct block_device *bdev, fmode_t mode,
-		       unsigned int cmd, unsigned long arg)
-{
-	struct hd_geometry	geo;
-	struct inode *inode = bdev->bd_inode;
-
-	DEBUGP(DCOW "cowloop - ioctl cmd %x\n", cmd);
-
-	switch ( iminor(inode) ) {
-
-	   /*
-	   ** allowed via control device only
-	   */
-	   case COWCTL:
-		switch (cmd) {
-		   /*
-		   ** write all bitmap chunks and cowheaders to cowfiles
-		   */
-		   case COWSYNC:
-			down(&cowdevlock);
-			cowlo_sync();
-			up(&cowdevlock);
-			return 0;
-
-		   /*
-		   ** open a new cowdevice (pair of rdofile/cowfile)
-		   */
-		   case COWMKPAIR:
-			return cowlo_makepair((void __user *)arg);
-
-		   /*
-		   ** close a cowdevice (pair of rdofile/cowfile)
-		   */
-		   case COWRMPAIR:
-			return cowlo_removepair((void __user *)arg);
-
-		   /*
-		   ** watch free space of filesystem containing cowfile
-		   */
-		   case COWWATCH:
-			return cowlo_watch((void __user *)arg);
-
-		   /*
-		   ** close cowfile for active device
-		   */
-		   case COWCLOSE:
-			return cowlo_cowctl((void __user *)arg, COWCLOSE);
-
-		   /*
-		   ** reopen cowfile read-only for active device
-		   */
-		   case COWRDOPEN:
-			return cowlo_cowctl((void __user *)arg, COWRDOPEN);
-
-		   default:
-			return -EINVAL;
-		} /* end of switch on command */
-
-	   /*
-	   ** allowed for any other cowdevice
-	   */
-	   default:
-		switch (cmd) {
-		   /*
-		   ** HDIO_GETGEO must be supported for fdisk, etc
-		   */
-		   case HDIO_GETGEO:
-			geo.cylinders = 0;
-			geo.heads     = 0;
-			geo.sectors   = 0;
-
-			if (copy_to_user((void __user *)arg, &geo, sizeof geo))
-				return -EFAULT;
-			return 0;
-
-		   default:
-			return -EINVAL;
-		} /* end of switch on ioctl-cmd code parameter */
-	} /* end of switch on minor number */
-}
-
-static struct block_device_operations cowlo_fops =
-{
-	.owner	 =     THIS_MODULE,
-        .open    =     cowlo_open,	/* called upon open  */
-        .release =     cowlo_release,	/* called upon close */
-        .ioctl   =     cowlo_ioctl,     /* called upon ioctl */
-};
-
-/*
-** handle ioctl-command COWMKPAIR:
-**	open a new cowdevice (pair of rdofile/cowfile) on-the-fly
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int
-cowlo_makepair(struct cowpair __user *arg)
-{
-	int		i, rv=0;
-	struct cowpair	cowpair;
-	unsigned char	*cowpath;
-	unsigned char	*rdopath;
-
-	/*
-	** retrieve info about pathnames
-	*/
-	if ( copy_from_user(&cowpair, arg, sizeof cowpair) )
-		return -EFAULT;
-
-	if ( (MAJOR(cowpair.device) != COWMAJOR) && (cowpair.device != ANYDEV) )
-		return -EINVAL;
-
-	if ( (MINOR(cowpair.device) >= maxcows)  && (cowpair.device != ANYDEV) )
-		return -EINVAL;
-
-	/*
-	** retrieve pathname strings
-	*/
-	if ( (cowpair.cowflen > PATH_MAX) || (cowpair.rdoflen > PATH_MAX) )
-		return -ENAMETOOLONG;
-
-	if ( !(cowpath = kmalloc(cowpair.cowflen+1, GFP_KERNEL)) )
-		return -ENOMEM;
-
-	if ( copy_from_user(cowpath, (void __user *)cowpair.cowfile,
-	                                            cowpair.cowflen) ) {
-		kfree(cowpath);
-		return -EFAULT;
-	}
-	*(cowpath+cowpair.cowflen) = 0;
-
-	if ( !(rdopath = kmalloc(cowpair.rdoflen+1, GFP_KERNEL)) ) {
-		kfree(cowpath);
-		return -ENOMEM;
-	}
-
-	if ( copy_from_user(rdopath, (void __user *)cowpair.rdofile,
-	                                            cowpair.rdoflen) ) {
-		kfree(rdopath);
-		kfree(cowpath);
-		return -EFAULT;
-	}
-	*(rdopath+cowpair.rdoflen) = 0;
-
-	/*
-	** open new cowdevice
-	*/
-	if ( cowpair.device == ANYDEV) {
-		/*
-		** search first unused minor
-		*/
-		for (i=0, rv=-EBUSY; i < maxcows; i++) {
-			if ( !((cowdevall[i])->state & COWDEVOPEN) ) {
-				rv = cowlo_openpair(rdopath, cowpath, 0, i);
-				break;
-			}
-		}
-
-		if (rv) { 		/* open failed? */
-			kfree(rdopath);
-			kfree(cowpath);
-			return rv;
-		}
-
-		/*
-		** return newly allocated cowdevice to user space
-		*/
-		cowpair.device = MKDEV(COWMAJOR, i);
-
-		if ( copy_to_user(arg, &cowpair, sizeof cowpair)) {
-			kfree(rdopath);
-			kfree(cowpath);
-			return -EFAULT;
-		}
-	} else { 		/* specific minor requested */
-		if ( (rv = cowlo_openpair(rdopath, cowpath, 0,
-						MINOR(cowpair.device)))) {
-			kfree(rdopath);
-			kfree(cowpath);
-			return rv;
-		}
-	}
-
-	return 0;
-}
-
-/*
-** handle ioctl-command COWRMPAIR:
-** 	deactivate an existing cowdevice (pair of rdofile/cowfile) on-the-fly
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int
-cowlo_removepair(unsigned long __user *arg)
-{
-	unsigned long		cowdevice;
-	struct cowloop_device	*cowdev;
-
-	/*
-	** retrieve info about device to be removed
-	*/
-	if ( copy_from_user(&cowdevice, arg, sizeof cowdevice))
-		return -EFAULT;
-
-	/*
-	** verify major-minor number
-	*/
-	if ( MAJOR(cowdevice) != COWMAJOR)
-		return -EINVAL;
-
-	if ( MINOR(cowdevice) >= maxcows)
-		return -EINVAL;
-
-	cowdev = cowdevall[MINOR(cowdevice)];
-
-	if ( !(cowdev->state & COWDEVOPEN) )
-		return -ENODEV;
-
-	/*
-	** synchronize bitmaps and close cowdevice
-	*/
-	if (cowdev->state & COWRWCOWOPEN) {
-		down(&cowdevlock);
-		cowlo_sync();
-		up(&cowdevlock);
-	}
-
-	return cowlo_closepair(cowdev);
-}
-
-/*
-** handle ioctl-command COWWATCH:
-**	watch the free space of the filesystem containing a cowfile
-**      of an open cowdevice
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int
-cowlo_watch(struct cowpair __user *arg)
-{
-	struct cowloop_device	*cowdev;
-	struct cowwatch		cowwatch;
-
-	/*
-	** retrieve structure holding info
-	*/
-	if ( copy_from_user(&cowwatch, arg, sizeof cowwatch))
-		return -EFAULT;
-
-	/*
-	** verify if cowdevice exists and is currently open
-	*/
-	if ( MINOR(cowwatch.device) >= maxcows)
-		return -EINVAL;
-
-	cowdev = cowdevall[MINOR(cowwatch.device)];
-
-	if ( !(cowdev->state & COWDEVOPEN) )
-		return -ENODEV;
-
-	/*
-	** if the WATCHWAIT-option is set, wait until the indicated
-	** threshold is reached (only one waiter allowed)
-	*/
-	if (cowwatch.flags & WATCHWAIT) {
-		/*
-		** check if already another waiter active
-		** for this cowdevice
-		*/
-		if (cowdev->state & COWWATCHDOG)
-			return -EAGAIN;
-
-		cowdev->state |= COWWATCHDOG;
-
-		cowdev->watchthresh = (unsigned long long)
-		                      cowwatch.threshold /
-				      (cowdev->blksize / 1024);
-
-		if (wait_event_interruptible(cowdev->watchq,
-		                    cowdev->watchthresh >= cowdev->blkavail)) {
-			cowdev->state &= ~COWWATCHDOG;
-			return EINTR;
-		}
-
-		cowdev->state &= ~COWWATCHDOG;
-	}
-
-	cowwatch.totalkb = (unsigned long long)cowdev->blktotal *
-	                                       cowdev->blksize / 1024;
-	cowwatch.availkb = (unsigned long long)cowdev->blkavail *
-	                                       cowdev->blksize / 1024;
-
-	if ( copy_to_user(arg, &cowwatch, sizeof cowwatch))
-		return -EFAULT;
-
-	return 0;
-}
-
-/*
-** handle ioctl-commands COWCLOSE and COWRDOPEN:
-**	COWCLOSE  - close the cowfile while the cowdevice remains open;
-**                  this allows an unmount of the filesystem on which
-**                  the cowfile resides
-**	COWRDOPEN - close the cowfile and reopen it for read-only;
-**                  this allows a remount read-ony of the filesystem
-**                  on which the cowfile resides
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int
-cowlo_cowctl(unsigned long __user *arg, int cmd)
-{
-	struct cowloop_device	*cowdev;
-	unsigned long		cowdevice;
-
-	/*
-	** retrieve info about device to be removed
-	*/
-	if ( copy_from_user(&cowdevice, arg, sizeof cowdevice))
-		return -EFAULT;
-
-	/*
-	** verify major-minor number
-	*/
-	if ( MAJOR(cowdevice) != COWMAJOR)
-		return -EINVAL;
-
-	if ( MINOR(cowdevice) >= maxcows)
-		return -EINVAL;
-
-	cowdev = cowdevall[MINOR(cowdevice)];
-
-	if ( !(cowdev->state & COWDEVOPEN) )
-		return -ENODEV;
-
-	/*
-	** synchronize bitmaps and close cowfile
-	*/
-	if (cowdev->state & COWRWCOWOPEN) {
-		down(&cowdevlock);
-		cowlo_sync();
-		up(&cowdevlock);
-	}
-
-	/*
-	** handle specific ioctl-command
-	*/
-	switch (cmd) {
-	   case COWRDOPEN:
-		/*
-		** if the cowfile is still opened read-write
-		*/
-		if (cowdev->state & COWRWCOWOPEN) {
-			/*
-			** close the cowfile
-			*/
-  			if (cowdev->cowfp)
-		  		filp_close(cowdev->cowfp, 0);
-
-			cowdev->state &= ~COWRWCOWOPEN;
-
-			/*
-			** open again for read-only
-			*/
-			cowdev->cowfp = filp_open(cowdev->cowname,
-		                          O_RDONLY|O_LARGEFILE, 0600);
-
-			if ( (cowdev->cowfp == NULL) || IS_ERR(cowdev->cowfp) ) {
-				printk(KERN_ERR
-				     "cowloop - failed to reopen cowfile %s\n",
-				     cowdev->cowname);
-				return -EINVAL;
-			}
-
-			/*
-			** mark cowfile open for read-only
-			*/
-			cowdev->state |= COWRDCOWOPEN;
-		} else {
-			return -EINVAL;
-		}
-		break;
-
-	   case COWCLOSE:
-		/*
-		** if the cowfile is still open
-		*/
-		if (cowdev->state & COWCOWOPEN) {
-			/*
-			** close the cowfile
-			*/
-  			if (cowdev->cowfp)
-		  		filp_close(cowdev->cowfp, 0);
-
-			cowdev->state &= ~COWCOWOPEN;
-		}
-	}
-
-	return 0;
-}
-
-
-/*****************************************************************************/
-/* Handling of I/O-requests for a cowdevice                                  */
-/*****************************************************************************/
-
-/*
-** function to be called by core-kernel to handle the I/O-requests
-** in the queue
-*/
-static void cowlo_request(struct request_queue *q)
-{
-	struct request		*req;
-	struct cowloop_device	*cowdev;
-
-	DEBUGP(DCOW "cowloop - request function called....\n");
-
-	while((req = blk_peek_request(q)) != NULL) {
-		DEBUGP(DCOW "cowloop - got next request\n");
-
-		if (! blk_fs_request(req)) {
-               		 /* this is not a normal file system request */
-                	__blk_end_request_cur(req, -EIO);
-                	continue;
-        	}
-		cowdev = req->rq_disk->private_data;
-
-		if (cowdev->iobusy)
-			return;
-		else
-			cowdev->iobusy = 1;
-
-		/*
-		** when no kernel-thread is available, the request will
-		** produce an I/O-error
-		*/
-		if (!cowdev->pid) {
-			printk(KERN_ERR"cowloop - no thread available\n");
-			__blk_end_request_cur(req, -EIO);	/* request failed */
-			cowdev->iobusy	= 0;
-			continue;
-		}
-
-		/*
-		** handle I/O-request in the context of the kernel-thread
-		*/
-		cowdev->req 	= req;
-		cowdev->qfilled	= 1;
-
-		wake_up_interruptible_sync(&cowdev->waitq);
-
-		/*
-		** get out of this function now while the I/O-request is
-		** under treatment of the kernel-thread; this function
-		** will be called again after the current I/O-request has
-		** been finished by the thread
-		*/
-		return;
-	}
-}
-
-/*
-** daemon-process (kernel-thread) executes this function
-*/
-static int
-cowlo_daemon(struct cowloop_device *cowdev)
-{
-	int	rv;
-	int     minor;
-	char	myname[16];
-
-	for (minor = 0; minor < maxcows; minor++) {
-		if (cowdev == cowdevall[minor]) break;
-	}
-	sprintf(myname, "cowloopd%d", minor);
-
-        daemonize(myname);
-
-	while (!cowdev->closedown) {
-		/*
-		** sleep while waiting for an I/O request;
-		** note that no non-interruptible wait has been used
-		** because the non-interruptible version of
-		** a *synchronous* wake_up does not exist (any more)
-		*/
-		if (wait_event_interruptible(cowdev->waitq, cowdev->qfilled)){
-			flush_signals(current); /* ignore signal-based wakeup */
-			continue;
-		}
-
-		if (cowdev->closedown)		/* module will be unloaded ? */{
-			cowdev->pid = 0;
-			return 0;
-		}
-
-		/*
-		** woken up by the I/O-request handler:	treat requested I/O
-		*/
-		cowdev->qfilled = 0;
-
-		rv = cowlo_do_request(cowdev->req);
-
-		/*
-		** reacquire the queue-spinlock for manipulating
-		** the request-queue and dequeue the request
-		*/
-		spin_lock_irq(&cowdev->rqlock);
-
-		__blk_end_request_cur(cowdev->req, rv);
-		cowdev->iobusy = 0;
-
-		/*
-		** initiate the next request from the queue
-		*/
-		cowlo_request(cowdev->rqueue);
-
-		spin_unlock_irq(&cowdev->rqlock);
-	}
-	return 0;
-}
-
-/*
-** function to be called in the context of the kernel thread
-** to handle the queued I/O-requests
-**
-** returns:
-** 	0   - fail
-**      1   - success
-*/
-static long int
-cowlo_do_request(struct request *req)
-{
-	unsigned long		len;
-	long int		rv;
-	loff_t 			offset;
-	struct cowloop_device	*cowdev = req->rq_disk->private_data;
-
-	/*
-	** calculate some variables which are needed later on
-	*/
-	len     =          blk_rq_cur_sectors(req) << 9;
-	offset  = (loff_t) blk_rq_pos(req)         << 9;
-
-	DEBUGP(DCOW"cowloop - req cmd=%d offset=%lld len=%lu addr=%p\n",
-				*(req->cmd), offset, len, req->buffer);
-
-	/*
-	** handle READ- or WRITE-request
-	*/
-	switch (rq_data_dir(req)) {
-	   /**********************************************************/
-	   case READ:
-		switch ( cowlo_checkio(cowdev, len, offset) ) {
-		   case ALLCOW:
-			rv = cowlo_readcow(cowdev, req->buffer, len, offset);
-			break;
-
-		   case ALLRDO:
-			rv = cowlo_readrdo(cowdev, req->buffer, len, offset);
-			break;
-
-	   	   case MIXEDUP:
-			rv = cowlo_readmix(cowdev, req->buffer, len, offset);
-			break;
-
-		   default:
-			rv = 0;	/* never happens */
-		}
-		break;
-
-	   /**********************************************************/
-	   case WRITE:
-		switch ( cowlo_checkio(cowdev, len, offset) ) {
-		   case ALLCOW:
-			/*
-			** straight-forward write will do...
-			*/
-			DEBUGP(DCOW"cowloop - write straight ");
-
-			rv = cowlo_writecow(cowdev, req->buffer, len, offset);
-			break;	/* from switch */
-
-		   case ALLRDO:
-			if ( (len & MUMASK) == 0) {
-				DEBUGP(DCOW"cowloop - write straight ");
-
-				rv = cowlo_writecow(cowdev, req->buffer,
-								len, offset);
-				break;
-			}
-
-	   	   case MIXEDUP:
-			rv = cowlo_writemix(cowdev, req->buffer, len, offset);
-			break;
-
-		   default:
-			rv = 0;	/* never happens */
-		}
-		break;
-
-	   default:
-		printk(KERN_ERR
-		       "cowloop - unrecognized command %d\n", *(req->cmd));
-		rv = 0;
-	}
-
-	return (rv <= 0 ? 0 : 1);
-}
-
-/*
-** check for a given I/O-request if all underlying blocks
-** (with size MAPUNIT) are either in the read-only file or in
-** the cowfile (or a combination of the two)
-**
-** returns:
-** 	ALLRDO  - all underlying blocks in rdofile
-**      ALLCOW  - all underlying blocks in cowfile
-**      MIXEDUP - underlying blocks partly in rdofile and partly in cowfile
-*/
-static int
-cowlo_checkio(struct cowloop_device *cowdev, int len, loff_t offset)
-{
-	unsigned long	mapnum, bytenum, bitnum, blocknr, partlen;
-	long int	totcnt, cowcnt;
-	char		*mc;
-
-	/*
-	** notice that the requested block might cross
-	** a blocksize boundary while one of the concerned
-	** blocks resides in the read-only file and another
-	** one in the copy-on-write file; in that case the
-        ** request will be broken up into pieces
-	*/
-	if ( (len <= MAPUNIT) &&
-	     (MAPUNIT - (offset & MUMASK) <= len) ) {
-		/*
-		** easy situation:
-		** requested data-block entirely fits within
-		** the mapunit used for the bitmap
-		** check if that block is located in rdofile or
-		** cowfile
-		*/
-		blocknr = offset >> MUSHIFT;
-
-		mapnum  = CALCMAP (blocknr);
-		bytenum = CALCBYTE(blocknr);
-		bitnum  = CALCBIT (blocknr);
-
-		if (*(*(cowdev->mapcache+mapnum)+bytenum)&(1<<bitnum))
-			return ALLCOW;
-		else
-			return ALLRDO;
-	}
-
-	/*
-	** less easy situation:
-	** the requested data-block does not fit within the mapunit
-	** used for the bitmap
-	** check if *all* underlying blocks involved reside on the rdofile
-       	** or the cowfile (so still no breakup required)
-	*/
-	for (cowcnt=totcnt=0; len > 0; len-=partlen, offset+=partlen, totcnt++){
-		/*
-		** calculate blocknr of involved block
-		*/
-		blocknr = offset >> MUSHIFT;
-
-		/*
-		** calculate partial length for this transfer
-		*/
-		partlen = MAPUNIT - (offset & MUMASK);
-		if (partlen > len)
-			partlen = len;
-
-		/*
-		** is this block located in the cowfile
-		*/
-		mapnum  = CALCMAP (blocknr);
-		bytenum = CALCBYTE(blocknr);
-		bitnum  = CALCBIT (blocknr);
-
-		mc	= *(cowdev->mapcache+mapnum);
-
-		if (*(mc+bytenum)&(1<<bitnum))
-			cowcnt++;;
-
-		DEBUGP(DCOW
-		       "cowloop - check %lu - map %lu, byte %lu, bit %lu, "
-		       "cowcnt %ld, totcnt %ld %02x %p\n",
-			blocknr, mapnum, bytenum, bitnum, cowcnt, totcnt,
-			*(mc+bytenum), mc);
-	}
-
-	if (cowcnt == 0)	/* all involved blocks on rdofile? */
-		return ALLRDO;
-
-	if (cowcnt == totcnt)	/* all involved blocks on cowfile? */
-		return ALLCOW;
-
-	/*
-	** situation somewhat more complicated:
-	** involved underlying blocks spread over both files
-	*/
-	return MIXEDUP;
-}
-
-/*
-** read requested chunk partly from rdofile and partly from cowfile
-**
-** returns:
-** 	0   - fail
-**      1   - success
-*/
-static int
-cowlo_readmix(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
-	unsigned long	mapnum, bytenum, bitnum, blocknr, partlen;
-	long int	rv;
-	char		*mc;
-
-	/*
-	** complicated approach: breakup required of read-request
-	*/
-	for (rv=1; len > 0; len-=partlen, buf+=partlen, offset+=partlen) {
-		/*
-		** calculate blocknr of entire block
-		*/
-		blocknr = offset >> MUSHIFT;
-
-		/*
-		** calculate partial length for this transfer
-		*/
-		partlen = MAPUNIT - (offset & MUMASK);
-		if (partlen > len)
-			partlen = len;
-
-		/*
-		** is this block located in the cowfile
-		*/
-		mapnum  = CALCMAP (blocknr);
-		bytenum = CALCBYTE(blocknr);
-		bitnum  = CALCBIT (blocknr);
-		mc	= *(cowdev->mapcache+mapnum);
-
-		if (*(mc+bytenum)&(1<<bitnum)) {
-			/*
-			** read (partial) block from cowfile
-			*/
-			DEBUGP(DCOW"cowloop - split read "
-				"cow partlen=%ld off=%lld\n", partlen, offset);
-
-			if (cowlo_readcow(cowdev, buf, partlen, offset) <= 0)
-				rv = 0;
-		} else {
-			/*
-			** read (partial) block from rdofile
-			*/
-			DEBUGP(DCOW"cowloop - split read "
-				"rdo partlen=%ld off=%lld\n", partlen, offset);
-
-			if (cowlo_readrdo(cowdev, buf, partlen, offset) <= 0)
-				rv = 0;
-		}
-	}
-
-	return rv;
-}
-
-/*
-** chunk to be written to the cowfile needs pieces to be
-** read from the rdofile
-**
-** returns:
-** 	0   - fail
-**      1   - success
-*/
-static int
-cowlo_writemix(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
-	unsigned long	mapnum, bytenum, bitnum, blocknr, partlen;
-	long int	rv;
-	char		*mc;
-
-	/*
-	** somewhat more complicated stuff is required:
-	** if the request is larger than one underlying
-	** block or is spread over two underlying blocks,
-	** split the request into pieces; if a block does not
-	** start at a block boundary, take care that
-	** surrounding data is read first (if needed),
-	** fit the new data in and write it as a full block
-	*/
-	for (rv=1; len > 0; len-=partlen, buf+=partlen, offset+=partlen) {
-		/*
-		** calculate partial length for this transfer
-		*/
-		partlen = MAPUNIT - (offset & MUMASK);
-		if (partlen > len)
-			partlen = len;
-
-		/*
-		** calculate blocknr of entire block
-		*/
-		blocknr = offset >> MUSHIFT;
-
-		/*
-		** has this block been written before?
-		*/
-		mapnum  = CALCMAP (blocknr);
-		bytenum = CALCBYTE(blocknr);
-		bitnum  = CALCBIT (blocknr);
-		mc	= *(cowdev->mapcache+mapnum);
-
-		if (*(mc+bytenum)&(1<<bitnum)) {
-			/*
-			** block has been written before;
-			** write transparantly to cowfile
-			*/
-			DEBUGP(DCOW
-			       "cowloop - splitwr transp\n");
-
-			if (cowlo_writecow(cowdev, buf, partlen, offset) <= 0)
-				rv = 0;
-		} else {
-			/*
-			** block has never been written before,
-			** so read entire block from
-			** read-only file first, unless
-			** a full block is requested to
-			** be written
-			*/
-			if (partlen < MAPUNIT) {
-				if (cowlo_readrdo(cowdev, cowdev->iobuf,
-				      MAPUNIT, (loff_t)blocknr << MUSHIFT) <= 0)
-					rv = 0;
-			}
-
-			/*
-			** transfer modified part into
-			** the block just read
-			*/
-			memcpy(cowdev->iobuf + (offset & MUMASK), buf, partlen);
-
-			/*
-			** write entire block to cowfile
-			*/
-			DEBUGP(DCOW"cowloop - split "
-				"partlen=%ld off=%lld\n",
-				partlen, (loff_t)blocknr << MUSHIFT);
-
-			if (cowlo_writecow(cowdev, cowdev->iobuf, MAPUNIT,
-					     (loff_t)blocknr << MUSHIFT) <= 0)
-				rv = 0;
-		}
-	}
-
-	return rv;
-}
-
-/*****************************************************************************/
-/* I/O-support for read-only file and copy-on-write file                     */
-/*****************************************************************************/
-
-/*
-** read data from the read-only file
-**
-** return-value: similar to user-mode read
-*/
-static long int
-cowlo_readrdo(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
-	long int	rv;
-	mm_segment_t	old_fs;
-	loff_t		saveoffset = offset;
-
-	DEBUGP(DCOW"cowloop - readrdo called\n");
-
-        old_fs = get_fs();
-	set_fs( get_ds() );
-	rv = cowdev->rdofp->f_op->read(cowdev->rdofp, buf, len, &offset);
-        set_fs(old_fs);
-
-	if (rv < len) {
-		printk(KERN_WARNING "cowloop - read-failure %ld on rdofile"
-		                    "- offset=%lld len=%d\n",
-					rv, saveoffset, len);
-	}
-
-	cowdev->rdoreads++;
-	return rv;
-}
-
-/*
-** read cowfile from a modified offset, i.e. skipping the bitmap and cowhead
-**
-** return-value: similar to user-mode read
-*/
-static long int
-cowlo_readcow(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
-	DEBUGP(DCOW"cowloop - readcow called\n");
-
-	offset += cowdev->cowhead->doffset;
-
-	return cowlo_readcowraw(cowdev, buf, len, offset);
-}
-
-/*
-** read cowfile from an absolute offset
-**
-** return-value: similar to user-mode read
-*/
-static long int
-cowlo_readcowraw(struct cowloop_device *cowdev,
-					void *buf, int len, loff_t offset)
-{
-	long int	rv;
-	mm_segment_t	old_fs;
-	loff_t		saveoffset = offset;
-
-	DEBUGP(DCOW"cowloop - readcowraw called\n");
-
-	/*
-	** be sure that cowfile is opened for read-write
-	*/
-	if ( !(cowdev->state & COWCOWOPEN) ) {
-		 printk(KERN_WARNING
-		        "cowloop - read request from cowfile refused\n");
-
-		return -EBADF;
-	}
-
-	/*
-	** issue low level read
-	*/
-        old_fs = get_fs();
-	set_fs( get_ds() );
-	rv = cowdev->cowfp->f_op->read(cowdev->cowfp, buf, len, &offset);
-        set_fs(old_fs);
-
-	if (rv < len) {
-		printk(KERN_WARNING
-		       "cowloop - read-failure %ld on cowfile"
-		       "- offset=%lld len=%d\n", rv, saveoffset, len);
-	}
-
-	cowdev->cowreads++;
-	return rv;
-}
-
-/*
-** write cowfile from a modified offset, i.e. skipping the bitmap and cowhead
-**
-** if a block is written for the first time while its contents consists
-** of binary zeroes only, the concerning bitmap is flushed to the cowfile
-**
-** return-value: similar to user-mode write
-*/
-static long int
-cowlo_writecow(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
-	long int	rv;
-	unsigned long	mapnum=0, mapbyte=0, mapbit=0, cowblock=0, partlen;
-	char		*tmpptr,  *mapptr = NULL;
-	loff_t		tmpoffset, mapoffset = 0;
-
-	DEBUGP(DCOW"cowloop - writecow called\n");
-
-	/*
-	** be sure that cowfile is opened for read-write
-	*/
-	if ( !(cowdev->state & COWRWCOWOPEN) ) {
-		 printk(KERN_WARNING
-		        "cowloop - Write request to cowfile refused\n");
-
-		return -EBADF;
-	}
-
-	/*
-	** write the entire block to the cowfile
-	*/
-	tmpoffset = offset + cowdev->cowhead->doffset;
-
-	rv = cowlo_writecowraw(cowdev, buf, len, tmpoffset);
-
-	/*
-	** verify if enough space available on filesystem holding
-	** the cowfile
-	**   - when the last write failed (might be caused by lack of space)
-	**   - when a watcher is active (to react adequatly)
-	**   - when the previous check indicated fs was almost full
-	**   - with regular intervals
-	*/
-	if ( (rv <= 0)				       ||
-	     (cowdev->state        & COWWATCHDOG)      ||
-	     (cowdev->blkavail / 2 < SPCDFLINTVL)      ||
-	     (cowdev->cowwrites    % SPCDFLINTVL == 0) ) {
-		struct kstatfs		ks;
-
-		if (vfs_statfs(cowdev->cowfp->f_dentry, &ks)==0){
-			if (ks.f_bavail <= SPCMINBLK) {
-				switch (ks.f_bavail) {
-				   case 0:
-				   case 1:
-				   case 2:
-				   case 3:
-					printk(KERN_ALERT
-					       "cowloop - "
-					       "ALERT: cowfile full!\n");
-					break;
-
-				   default:
-					printk(KERN_WARNING
-					       "cowloop - cowfile almost "
-					       "full (only %llu Kb free)\n",
-						(unsigned long long)
-                                                ks.f_bsize * ks.f_bavail /1024);
-				}
-			}
-
-			cowdev->blktotal = ks.f_blocks;
-			cowdev->blkavail = ks.f_bavail;
-
-			/*
-			** wakeup watcher if threshold has been reached
-			*/
-			if ( (cowdev->state & COWWATCHDOG) &&
-			    (cowdev->watchthresh >= cowdev->blkavail) ) {
-				wake_up_interruptible(&cowdev->watchq);
-			}
-		}
-	}
-
-	if (rv <= 0)
-		return rv;
-
-	DEBUGP(DCOW"cowloop - block written\n");
-
-	/*
-	** check if block(s) is/are written to the cowfile
-	** for the first time; if so, adapt the bitmap
-	*/
-	for (; len > 0; len-=partlen, offset+=partlen, buf+=partlen) {
-		/*
-		** calculate partial length for this transfer
-		*/
-		partlen = MAPUNIT - (offset & MUMASK);
-		if (partlen > len)
-			partlen = len;
-
-		/*
-		** calculate bitnr of written chunk of cowblock
-		*/
-		cowblock = offset >> MUSHIFT;
-
-		mapnum   = CALCMAP (cowblock);
-		mapbyte  = CALCBYTE(cowblock);
-		mapbit   = CALCBIT (cowblock);
-
-		if (*(*(cowdev->mapcache+mapnum)+mapbyte) & (1<<mapbit))
-			continue;	/* already written before */
-
-	       	/*
-		** if the block is written for the first time,
-		** the corresponding bit should be set in the bitmap
-		*/
-		*(*(cowdev->mapcache+mapnum)+mapbyte) |= (1<<mapbit);
-
-		cowdev->nrcowblocks++;
-
-		DEBUGP(DCOW"cowloop - bitupdate blk=%ld map=%ld "
-		        "byte=%ld bit=%ld\n",
-			cowblock, mapnum, mapbyte, mapbit);
-
-		/*
-		** check if the cowhead in the cowfile is currently
-		** marked clean; if so, mark it dirty and flush it
-		*/
-		if ( !(cowdev->cowhead->flags &= COWDIRTY)) {
-			cowdev->cowhead->flags	|= COWDIRTY;
-
-			cowlo_writecowraw(cowdev, cowdev->cowhead,
-							MAPUNIT, (loff_t)0);
-		}
-
-		/*
-		** if the written datablock contained binary zeroes,
-		** the bitmap block should be marked to be flushed to disk
-		** (blocks containing all zeroes cannot be recovered by
-		** the cowrepair-program later on if cowloop is not properly
-		** removed via rmmod)
-		*/
-		if ( memcmp(buf, allzeroes, partlen) ) /* not all zeroes? */
-			continue;                      /* no flush needed */
-
-		/*
-		** calculate positions of bitmap block to be flushed
-		** - pointer of bitmap block in memory
-		** - offset  of bitmap block in cowfile
-		*/
-		tmpptr    = *(cowdev->mapcache+mapnum) + (mapbyte & (~MUMASK));
-		tmpoffset = (loff_t) MAPUNIT + mapnum * MAPCHUNKSZ +
-		                                       (mapbyte & (~MUMASK));
-
-		/*
-		** flush a bitmap block at the moment that all bits have
-		** been set in that block, i.e. at the moment that we
-		** switch to another bitmap block
-		*/
-		if ( (mapoffset != 0) && (mapoffset != tmpoffset) ) {
-			if (cowlo_writecowraw(cowdev, mapptr, MAPUNIT,
-							mapoffset) < 0) {
-				printk(KERN_WARNING
-				       "cowloop - write-failure on bitmap - "
-				       "blk=%ld map=%ld byte=%ld bit=%ld\n",
-				  	cowblock, mapnum, mapbyte, mapbit);
-			}
-
-			DEBUGP(DCOW"cowloop - bitmap blk written %lld\n",
-								mapoffset);
-		}
-
-		/*
-		** remember offset in cowfile and offset in memory
-		** for bitmap to be flushed; flushing will be done
-		** as soon as all updates in this bitmap block have
-		** been done
-		*/
-		mapoffset = tmpoffset;
-		mapptr    = tmpptr;
-	}
-
-	/*
-	** any new block written containing binary zeroes?
-	*/
-	if (mapoffset) {
-		if (cowlo_writecowraw(cowdev, mapptr, MAPUNIT, mapoffset) < 0) {
-			printk(KERN_WARNING
-			       "cowloop - write-failure on bitmap - "
-			       "blk=%ld map=%ld byte=%ld bit=%ld\n",
-			       cowblock, mapnum, mapbyte, mapbit);
-		}
-
-		DEBUGP(DCOW"cowloop - bitmap block written %lld\n", mapoffset);
-	}
-
-	return rv;
-}
-
-/*
-** write cowfile from an absolute offset
-**
-** return-value: similar to user-mode write
-*/
-static long int
-cowlo_writecowraw(struct cowloop_device *cowdev,
-					void *buf, int len, loff_t offset)
-{
-	long int	rv;
-	mm_segment_t	old_fs;
-	loff_t		saveoffset = offset;
-
-	DEBUGP(DCOW"cowloop - writecowraw called\n");
-
-	/*
-	** be sure that cowfile is opened for read-write
-	*/
-	if ( !(cowdev->state & COWRWCOWOPEN) ) {
-		 printk(KERN_WARNING
-		        "cowloop - write request to cowfile refused\n");
-
-		return -EBADF;
-	}
-
-	/*
-	** issue low level write
-	*/
-        old_fs = get_fs();
-	set_fs( get_ds() );
-	rv = cowdev->cowfp->f_op->write(cowdev->cowfp, buf, len, &offset);
-        set_fs(old_fs);
-
-	if (rv < len) {
-		printk(KERN_WARNING
-		       "cowloop - write-failure %ld on cowfile"
-		       "- offset=%lld len=%d\n", rv, saveoffset, len);
-	}
-
-	cowdev->cowwrites++;
-	return rv;
-}
-
-
-/*
-** readproc-function: called when the corresponding /proc-file is read
-*/
-static int
-cowlo_readproc(char *buf, char **start, off_t pos, int cnt, int *eof, void *p)
-{
-	struct cowloop_device *cowdev = p;
-
-	revision[sizeof revision - 3] = '\0';
-
-	return sprintf(buf,
-		"   cowloop version: %9s\n\n"
-		"      device state: %s%s%s%s\n"
-		"   number of opens: %9d\n"
-		"     pid of thread: %9d\n\n"
-		"    read-only file: %9s\n"
-		"          rdoreads: %9lu\n\n"
-		"copy-on-write file: %9s\n"
-		"     state cowfile: %9s\n"
-		"     bitmap-blocks: %9lu (of %d bytes)\n"
-		"  cowblocks in use: %9lu (of %d bytes)\n"
-		"          cowreads: %9lu\n"
-		"         cowwrites: %9lu\n",
-			&revision[11],
-
-			cowdev->state & COWDEVOPEN   ? "devopen "   : "",
-			cowdev->state & COWRWCOWOPEN ? "cowopenrw " : "",
-			cowdev->state & COWRDCOWOPEN ? "cowopenro " : "",
-			cowdev->state & COWWATCHDOG  ? "watchdog "  : "",
-
-			cowdev->opencnt,
-			cowdev->pid,
-			cowdev->rdoname,
-			cowdev->rdoreads,
-			cowdev->cowname,
-			cowdev->cowhead->flags & COWDIRTY ? "dirty":"clean",
-			cowdev->mapsize >> MUSHIFT, MAPUNIT,
-			cowdev->nrcowblocks, MAPUNIT,
-			cowdev->cowreads,
-			cowdev->cowwrites);
-}
-
-/*****************************************************************************/
-/* Setup and destroy cowdevices                                              */
-/*****************************************************************************/
-
-/*
-** open and prepare a cowdevice (rdofile and cowfile) and allocate bitmaps
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int
-cowlo_openpair(char *rdof, char *cowf, int autorecover, int minor)
-{
-	long int		rv;
-	struct cowloop_device	*cowdev = cowdevall[minor];
-	struct kstatfs		ks;
-
-	down(&cowdevlock);
-
-	/*
-	** requested device exists?
-	*/
-	if (minor >= maxcows) {
-		up(&cowdevlock);
-		return -ENODEV;
-	}
-
-	/*
-	** requested device already assigned to cowdevice?
-	*/
-	if (cowdev->state & COWDEVOPEN) {
-		up(&cowdevlock);
-		return -EBUSY;
-	}
-
-	/*
-	** initialize administration
-	*/
-	memset(cowdev, 0, sizeof *cowdev);
-
-	spin_lock_init     (&cowdev->rqlock);
-	init_waitqueue_head(&cowdev->waitq);
-	init_waitqueue_head(&cowdev->watchq);
-
-	/*
-	** open the read-only file
-	*/
-	DEBUGP(DCOW"cowloop - call openrdo....\n");
-
-	if ( (rv = cowlo_openrdo(cowdev, rdof)) ) {
-		cowlo_undo_openrdo(cowdev);
-		up(&cowdevlock);
-		return rv;
-	}
-
-	/*
-	** open the cowfile
-	*/
-	DEBUGP(DCOW"cowloop - call opencow....\n");
-
-	if ( (rv = cowlo_opencow(cowdev, cowf, autorecover)) ) {
-		cowlo_undo_openrdo(cowdev);
-		cowlo_undo_opencow(cowdev);
-		up(&cowdevlock);
-		return rv;
-	}
-
-	/*
-	** administer total and available size of filesystem holding cowfile
-	*/
-	if (vfs_statfs(cowdev->cowfp->f_dentry, &ks)==0) {
-		cowdev->blksize  = ks.f_bsize;
-		cowdev->blktotal = ks.f_blocks;
-		cowdev->blkavail = ks.f_bavail;
-	} else {
-		cowdev->blksize  = 1024;	/* avoid division by zero */
-	}
-
-	/*
-	** flush the (recovered) bitmaps and cowhead to the cowfile
-	*/
-	DEBUGP(DCOW"cowloop - call cowsync....\n");
-
-	cowlo_sync();
-
-	/*
-	** allocate gendisk for the cow device
-	*/
-	DEBUGP(DCOW"cowloop - alloc disk....\n");
-
-	if ((cowdev->gd = alloc_disk(1)) == NULL) {
-		printk(KERN_WARNING
-		       "cowloop - unable to alloc_disk for cowloop\n");
-
-		cowlo_undo_openrdo(cowdev);
-		cowlo_undo_opencow(cowdev);
-		up(&cowdevlock);
-		return -ENOMEM;
-	}
-
-	cowdev->gd->major        = COWMAJOR;
-	cowdev->gd->first_minor  = minor;
-	cowdev->gd->minors       = 1;
-	cowdev->gd->fops         = &cowlo_fops;
-	cowdev->gd->private_data = cowdev;
-	sprintf(cowdev->gd->disk_name, "%s%d", DEVICE_NAME, minor);
-
-	/* in .5 Kb units */
-	set_capacity(cowdev->gd, (cowdev->numblocks*(MAPUNIT/512)));
-
-	DEBUGP(DCOW"cowloop - init request queue....\n");
-
-	if ((cowdev->rqueue = blk_init_queue(cowlo_request, &cowdev->rqlock))
-								== NULL) {
-		printk(KERN_WARNING
-		       "cowloop - unable to get request queue for cowloop\n");
-
-		del_gendisk(cowdev->gd);
-		cowlo_undo_openrdo(cowdev);
-		cowlo_undo_opencow(cowdev);
-		up(&cowdevlock);
-		return -EINVAL;
-	}
-
-	blk_queue_logical_block_size(cowdev->rqueue, cowdev->blocksz);
-	cowdev->gd->queue = cowdev->rqueue;
-
-	/*
-	** start kernel thread to handle requests
-	*/
-	DEBUGP(DCOW"cowloop - kickoff daemon....\n");
-
-	cowdev->pid = kernel_thread((int (*)(void *))cowlo_daemon, cowdev, 0);
-
-	/*
-	** create a file below directory /proc/cow for this new cowdevice
-	*/
-	if (cowlo_procdir) {
-		char 	tmpname[64];
-
-		sprintf(tmpname, "%d", minor);
-
-		create_proc_read_entry(tmpname, 0 , cowlo_procdir,
-						cowlo_readproc, cowdev);
-	}
-
-	cowdev->state	|= COWDEVOPEN;
-
-	cowdev->rdoname = rdof;
-	cowdev->cowname = cowf;
-
-	/*
-	** enable the new disk; this triggers the first request!
-	*/
-	DEBUGP(DCOW"cowloop - call add_disk....\n");
-
-	add_disk(cowdev->gd);
-
-	up(&cowdevlock);
-	return 0;
-}
-
-/*
-** close a cowdevice (pair of rdofile/cowfile) and release memory
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int
-cowlo_closepair(struct cowloop_device *cowdev)
-{
-	int minor;
-
-	down(&cowdevlock);
-
-	/*
-	** if cowdevice is not activated at all, refuse
-	*/
-	if ( !(cowdev->state & COWDEVOPEN) ) {
-		up(&cowdevlock);
-		return -ENODEV;
-	}
-
-	/*
-	** if this cowdevice is still open, refuse
-	*/
-	if (cowdev->opencnt > 0) {
-		up(&cowdevlock);
-		return -EBUSY;
-	}
-
-	up(&cowdevlock);
-
-	/*
-	** wakeup watcher (if any)
-	*/
-	if (cowdev->state & COWWATCHDOG) {
-		cowdev->watchthresh = cowdev->blkavail;
-		wake_up_interruptible(&cowdev->watchq);
-	}
-
-	/*
-	** wakeup kernel-thread to be able to exit
-	** and wait until it has exited
-	*/
-	cowdev->closedown = 1;
-	cowdev->qfilled   = 1;
-	wake_up_interruptible(&cowdev->waitq);
-
-       	while (cowdev->pid)
-               	schedule();
-
-	del_gendisk(cowdev->gd);  /* revert the alloc_disk() */
-	put_disk(cowdev->gd);     /* revert the add_disk()   */
-
-	if (cowlo_procdir) {
-		char 	tmpname[64];
-
-		for (minor = 0; minor < maxcows; minor++) {
-			if (cowdev == cowdevall[minor]) break;
-		}
-		sprintf(tmpname, "%d", minor);
-
-		remove_proc_entry(tmpname, cowlo_procdir);
-	}
-
-	blk_cleanup_queue(cowdev->rqueue);
-
-	/*
-	** release memory for filenames if these names have
-	** been allocated dynamically
-	*/
-	if ( (cowdev->cowname) && (cowdev->cowname != cowfile))
-		kfree(cowdev->cowname);
-
-	if ( (cowdev->rdoname) && (cowdev->rdoname != rdofile))
-		kfree(cowdev->rdoname);
-
-	cowlo_undo_openrdo(cowdev);
-	cowlo_undo_opencow(cowdev);
-
-	cowdev->state &= ~COWDEVOPEN;
-
-	return 0;
-}
-
-/*
-** open the read-only file
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int
-cowlo_openrdo(struct cowloop_device *cowdev, char *rdof)
-{
-	struct file	*f;
-	struct inode	*inode;
-	long int	i, nrval;
-
-	DEBUGP(DCOW"cowloop - openrdo called\n");
-
-	/*
-	** open the read-only file
-	*/
-        if(*rdof == '\0') {
-     	     	printk(KERN_ERR
-		       "cowloop - specify name for read-only file\n\n");
-         	return -EINVAL;
-        }
-
-	f = filp_open(rdof, O_RDONLY|O_LARGEFILE, 0);
-
-	if ( (f == NULL) || IS_ERR(f) ) {
-		printk(KERN_ERR
-		       "cowloop - open of rdofile %s failed\n", rdof);
-		return -EINVAL;
-	}
-
-	cowdev->rdofp = f;
-
-	inode = f->f_dentry->d_inode;
-
-	if ( !S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode) ) {
-		printk(KERN_ERR
-		       "cowloop - %s not regular file or blockdev\n", rdof);
-		return -EINVAL;
-	}
-
-	DEBUGP(DCOW"cowloop - determine size rdo....\n");
-
-	/*
-	** determine block-size and total size of read-only file
-	*/
-	if (S_ISREG(inode->i_mode)) {
-		/*
-		** read-only file is a regular file
-		*/
-		cowdev->blocksz   = 512;	/* other value fails */
-		cowdev->numblocks = inode->i_size >> MUSHIFT;
-
-		if (inode->i_size & MUMASK) {
-			printk(KERN_WARNING
-			       "cowloop - rdofile %s truncated to multiple "
-			       "of %d bytes\n", rdof, MAPUNIT);
-		}
-
-		DEBUGP(DCOW"cowloop - RO=regular: numblocks=%d, blocksz=%d\n",
-			cowdev->numblocks, cowdev->blocksz);
-	} else {
-		/*
-		** read-only file is a block device
-		*/
-		cowdev->belowdev  = inode->i_bdev;
-		cowdev->belowgd   = cowdev->belowdev->bd_disk; /* gendisk */
-
-		if (cowdev->belowdev->bd_part) {
-			cowdev->numblocks = cowdev->belowdev->bd_part->nr_sects
-								/ (MAPUNIT/512);
-		}
-
-		if (cowdev->belowgd) {
-			cowdev->belowq = cowdev->belowgd->queue;
-
-			if (cowdev->numblocks == 0) {
-				cowdev->numblocks = get_capacity(cowdev->belowgd)
-                         					/ (MAPUNIT/512);
-			}
-		}
-
-
-		if (cowdev->belowq)
-			cowdev->blocksz = queue_logical_block_size(cowdev->belowq);
-
-		if (cowdev->blocksz == 0)
-			cowdev->blocksz = BLOCK_SIZE; /* default 2^10 */
-
-		DEBUGP(DCOW"cowloop - numblocks=%d, "
-		           "blocksz=%d, belowgd=%p, belowq=%p\n",
-		  	cowdev->numblocks, cowdev->blocksz,
-			cowdev->belowgd, cowdev->belowq);
-
-		DEBUGP(DCOW"cowloop - belowdev.bd_block_size=%d\n",
-		  	cowdev->belowdev->bd_block_size);
-	}
-
-	if (cowdev->numblocks == 0) {
-		printk(KERN_ERR "cowloop - %s has no contents\n", rdof);
-		return -EINVAL;
-	}
-
-	/*
-	** reserve space in memory as generic I/O buffer
-	*/
-	cowdev->iobuf  = kmalloc(MAPUNIT, GFP_KERNEL);
-
-	if (!cowdev->iobuf) {
-		printk(KERN_ERR
-		       "cowloop - cannot get space for buffer %d\n", MAPUNIT);
-		return -ENOMEM;
-	}
-
-	DEBUGP(DCOW"cowloop - determine fingerprint rdo....\n");
-
-	/*
-	** determine fingerprint for read-only file
-	** 	calculate fingerprint from first four datablocks
-	**	which do not contain binary zeroes
-	*/
-	for (i=0, cowdev->fingerprint=0, nrval=0;
-			(nrval < 4)&&(i < cowdev->numblocks); i++) {
-		int 		j;
-		unsigned char	cs;
-
-		/*
-		** read next block
-		*/
-		if (cowlo_readrdo(cowdev, cowdev->iobuf, MAPUNIT,
-						(loff_t)i << MUSHIFT) < 1)
-			break;
-
-		/*
-		** calculate fingerprint by adding all byte-values
-		*/
-		for (j=0, cs=0; j < MAPUNIT; j++)
-			cs += *(cowdev->iobuf+j);
-
-		if (cs == 0)	/* block probably contained zeroes */
-			continue;
-
-		/*
-		** shift byte-value to proper place in final fingerprint
-		*/
-		cowdev->fingerprint |= cs << (nrval*8);
-		nrval++;
-	}
-
-	return 0;
-}
-
-/*
-** undo memory allocs and file opens issued so far
-** related to the read-only file
-*/
-static void
-cowlo_undo_openrdo(struct cowloop_device *cowdev)
-{
-	if(cowdev->iobuf);
-		kfree(cowdev->iobuf);
-
-	if (cowdev->rdofp)
-  		filp_close(cowdev->rdofp, 0);
-}
-
-/*
-** open the cowfile
-**
-** returns:
-** 	0   - okay
-**    < 0   - error value
-*/
-static int
-cowlo_opencow(struct cowloop_device *cowdev, char *cowf, int autorecover)
-{
-	long int		i, rv;
-	int			minor;
-	unsigned long		nb;
-	struct file		*f;
-	struct inode		*inode;
-	loff_t			offset;
-	struct cowloop_device	*cowtmp;
-
-	DEBUGP(DCOW"cowloop - opencow called\n");
-
-	/*
-	** open copy-on-write file (read-write)
-	*/
-        if (cowf[0] == '\0') {
-          	printk(KERN_ERR
-                 "cowloop - specify name of copy-on-write file\n\n");
-         	return -EINVAL;
-        }
-
-	f = filp_open(cowf, O_RDWR|O_LARGEFILE, 0600);
-
-	if ( (f == NULL) || IS_ERR(f) ) {
-		/*
-		** non-existing cowfile: try to create
-		*/
-		f = filp_open(cowf, O_RDWR|O_CREAT|O_LARGEFILE, 0600);
-
-		if ( (f == NULL) || IS_ERR(f) ) {
-			printk(KERN_ERR
-		       	  "cowloop - failed to open file %s for read-write\n\n",
-		       						cowf);
-			return -EINVAL;
-	 	}
-	}
-
-	cowdev->cowfp = f;
-
-	inode = f->f_dentry->d_inode;
-
-	if (!S_ISREG(inode->i_mode)) {
-		printk(KERN_ERR "cowloop - %s is not regular file\n", cowf);
-		return -EINVAL;
-	}
-
-	/*
-	** check if this cowfile is already in use for another cowdevice
-	*/
-	for (minor = 0; minor < maxcows; minor++) {
-
-		cowtmp = cowdevall[minor];
-
-		if ( !(cowtmp->state & COWDEVOPEN) )
-			continue;
-
-		if (cowtmp == cowdev)
-			continue;
-
-		if (cowtmp->cowfp->f_dentry->d_inode == f->f_dentry->d_inode) {
-			printk(KERN_ERR
-			       "cowloop - %s: already in use as cow\n", cowf);
-			return -EBUSY;
-		}
-	}
-
-	/*
-	** mark cowfile open for read-write
-	*/
-	cowdev->state |= COWRWCOWOPEN;
-
-	/*
-	** calculate size (in bytes) for total bitmap in cowfile;
-	** when the size of the cowhead block is added, the start-offset
-	** for the modified data blocks can be found
-	*/
-	nb = cowdev->numblocks;
-
-	if (nb%8)		/* transform #bits to #bytes */
-		nb+=8;  	/* rounded if necessary      */
-	nb /= 8;
-
-	if (nb & MUMASK)	/* round up #bytes to MAPUNIT chunks */
-		cowdev->mapsize = ( (nb>>MUSHIFT) +1) << MUSHIFT;
-	else
-		cowdev->mapsize = nb;
-
-	/*
-	** reserve space in memory for the cowhead
-	*/
-	cowdev->cowhead = kmalloc(MAPUNIT, GFP_KERNEL);
-
-	if (!cowdev->cowhead) {
-		printk(KERN_ERR "cowloop - cannot get space for cowhead %d\n",
-								     MAPUNIT);
-		return -ENOMEM;
-	}
-
-	memset(cowdev->cowhead, 0, MAPUNIT);
-
-	DEBUGP(DCOW"cowloop - prepare cowhead....\n");
-
-	/*
-	** check if the cowfile exists or should be created
-	*/
-	if (inode->i_size != 0) {
-		/*
-		** existing cowfile: read the cow head
-		*/
-		if (inode->i_size < MAPUNIT) {
-			printk(KERN_ERR
-			       "cowloop - existing cowfile %s too small\n",
-				cowf);
-			return -EINVAL;
-		}
-
-		cowlo_readcowraw(cowdev, cowdev->cowhead, MAPUNIT, (loff_t) 0);
-
-		/*
-		** verify if the existing file is really a cowfile
-		*/
-		if (cowdev->cowhead->magic != COWMAGIC) {
-			printk(KERN_ERR
-			       "cowloop - cowfile %s has incorrect format\n",
-				cowf);
-			return -EINVAL;
-		}
-
-		/*
-		** verify the cowhead version of the cowfile
-		*/
-		if (cowdev->cowhead->version > COWVERSION) {
-			printk(KERN_ERR
-			       "cowloop - cowfile %s newer than this driver\n",
-				cowf);
-			return -EINVAL;
-		}
-
-		/*
-		** make sure that this is not a packed cowfile
-		*/
-		if (cowdev->cowhead->flags & COWPACKED) {
-			printk(KERN_ERR
-			    "cowloop - packed cowfile %s not accepted\n", cowf);
-			return -EINVAL;
-		}
-
-		/*
-		** verify if the cowfile has been properly closed
-		*/
-		if (cowdev->cowhead->flags & COWDIRTY) {
-			/*
-			** cowfile was not properly closed;
-			** check if automatic recovery is required
-			** (actual recovery will be done later on)
-			*/
-			if (!autorecover) {
-				printk(KERN_ERR
-				       "cowloop - cowfile %s is dirty "
-				       "(not properly closed by rmmod?)\n",
-					cowf);
-				printk(KERN_ERR
-				       "cowloop - run cowrepair or specify "
-				       "'option=r' to recover\n");
-				return -EINVAL;
-			}
-		}
-
-		/*
-		** verify if the cowfile is really related to this rdofile
-		*/
-		if (cowdev->cowhead->rdoblocks != cowdev->numblocks) {
-			printk(KERN_ERR
-		       	       "cowloop - cowfile %s (size %lld) not related "
-		       	       "to rdofile (size %lld)\n",
-				cowf,
-				(long long)cowdev->cowhead->rdoblocks <<MUSHIFT,
-				(long long)cowdev->numblocks <<MUSHIFT);
-			return -EINVAL;
-		}
-
-		if (cowdev->cowhead->rdofingerprint != cowdev->fingerprint) {
-			printk(KERN_ERR
-		       	     "cowloop - cowfile %s not related to rdofile "
-			     " (fingerprint err - rdofile modified?)\n", cowf);
-			return -EINVAL;
-		}
-	} else {
-		/*
-		** new cowfile: determine the minimal size (cowhead+bitmap)
-		*/
-		offset = (loff_t) MAPUNIT + cowdev->mapsize - 1;
-
-		if ( cowlo_writecowraw(cowdev, "", 1, offset) < 1) {
-			printk(KERN_ERR
-			       "cowloop - cannot set cowfile to size %lld\n",
-				offset+1);
-			return -EINVAL;
-		}
-
-		/*
-		** prepare new cowhead
-		*/
-		cowdev->cowhead->magic		= COWMAGIC;
-		cowdev->cowhead->version	= COWVERSION;
-		cowdev->cowhead->mapunit	= MAPUNIT;
-		cowdev->cowhead->mapsize	= cowdev->mapsize;
-		cowdev->cowhead->rdoblocks	= cowdev->numblocks;
-		cowdev->cowhead->rdofingerprint	= cowdev->fingerprint;
-		cowdev->cowhead->cowused	= 0;
-
-		/*
-		** calculate start offset of data in cowfile,
-		** rounded up to multiple of 4K to avoid
-		** unnecessary disk-usage for written datablocks in
-		** the sparsed cowfile on e.g. 4K filesystems
-		*/
-		cowdev->cowhead->doffset =
-			((MAPUNIT+cowdev->mapsize+4095)>>12)<<12;
-	}
-
-	cowdev->cowhead->flags	= 0;
-
-	DEBUGP(DCOW"cowloop - reserve space bitmap....\n");
-
-	/*
-	** reserve space in memory for the entire bitmap and
-	** fill it with the bitmap-data from disk; the entire
-	** bitmap is allocated in several chunks because kmalloc
-	** has restrictions regarding the allowed size per kmalloc
-	*/
-	cowdev->mapcount = (cowdev->mapsize+MAPCHUNKSZ-1)/MAPCHUNKSZ;
-
-	/*
-	** the size of every bitmap chunk will be MAPCHUNKSZ bytes, except for
-	** the last bitmap chunk: calculate remaining size for this chunk
-	*/
-	if (cowdev->mapsize % MAPCHUNKSZ == 0)
-		cowdev->mapremain = MAPCHUNKSZ;
-	else
-		cowdev->mapremain = cowdev->mapsize % MAPCHUNKSZ;
-
-	/*
-	** allocate space to store all pointers for the bitmap-chunks
-	** (initialize area with zeroes to allow proper undo)
-	*/
-	cowdev->mapcache = kmalloc(cowdev->mapcount * sizeof(char *),
-								GFP_KERNEL);
-	if (!cowdev->mapcache) {
-		printk(KERN_ERR
-		       "cowloop - can not allocate space for bitmap ptrs\n");
-		return -ENOMEM;
-	}
-
-	memset(cowdev->mapcache, 0, cowdev->mapcount * sizeof(char *));
-
-	/*
-	** allocate space to store the bitmap-chunks themselves
-	*/
-	for (i=0; i < cowdev->mapcount; i++) {
-		if (i < (cowdev->mapcount-1))
-			*(cowdev->mapcache+i) = kmalloc(MAPCHUNKSZ, GFP_KERNEL);
-		else
-			*(cowdev->mapcache+i) = kmalloc(cowdev->mapremain,
-						                  GFP_KERNEL);
-
-		if (*(cowdev->mapcache+i) == NULL) {
-			printk(KERN_ERR "cowloop - no space for bitmapchunk %ld"
-					" totmapsz=%ld, mapcnt=%d mapunit=%d\n",
-					i, cowdev->mapsize, cowdev->mapcount,
-					MAPUNIT);
-			return -ENOMEM;
-		}
-	}
-
-	DEBUGP(DCOW"cowloop - read bitmap from cow....\n");
-
-	/*
-	** read the entire bitmap from the cowfile into the in-memory cache;
-	** count the number of blocks that are in use already
-	** (statistical purposes)
-	*/
-	for (i=0, offset=MAPUNIT; i < cowdev->mapcount;
-					i++, offset+=MAPCHUNKSZ) {
-		unsigned long	numbytes;
-
-		if (i < (cowdev->mapcount-1))
-			/*
-			** full bitmap chunk
-			*/
-			numbytes = MAPCHUNKSZ;
-		else
-			/*
-			** last bitmap chunk: might be partly filled
-			*/
-			numbytes = cowdev->mapremain;
-
-		cowlo_readcowraw(cowdev, *(cowdev->mapcache+i),
-							numbytes, offset);
-	}
-
-	/*
-	** if the cowfile was dirty and automatic recovery is required,
-	** reconstruct a proper bitmap in memory now
-	*/
-	if (cowdev->cowhead->flags & COWDIRTY) {
-		unsigned long long	blocknum;
-		char			databuf[MAPUNIT];
-		unsigned long		mapnum, mapbyte, mapbit;
-
-		printk(KERN_NOTICE "cowloop - recover dirty cowfile %s....\n",
-							cowf);
-
-		/*
-		** read all data blocks
-		*/
-		for (blocknum=0, rv=1, offset=0;
-			cowlo_readcow(cowdev, databuf, MAPUNIT, offset) > 0;
-			blocknum++, offset += MAPUNIT) {
-
-			/*
-			** if this datablock contains real data (not binary
-			** zeroes), set the corresponding bit in the bitmap
-			*/
-			if ( memcmp(databuf, allzeroes, MAPUNIT) == 0)
-				continue;
-
-			mapnum  = CALCMAP (blocknum);
-			mapbyte = CALCBYTE(blocknum);
-			mapbit  = CALCBIT (blocknum);
-
-			*(*(cowdev->mapcache+mapnum)+mapbyte) |= (1<<mapbit);
-		}
-
-		printk(KERN_NOTICE "cowloop - cowfile recovery completed\n");
-	}
-
-	/*
-	** count all bits set in the bitmaps for statistical purposes
-	*/
-	for (i=0, cowdev->nrcowblocks = 0; i < cowdev->mapcount; i++) {
-		long	numbytes;
-		char	*p;
-
-		if (i < (cowdev->mapcount-1))
-			numbytes = MAPCHUNKSZ;
-		else
-			numbytes = cowdev->mapremain;
-
-		p = *(cowdev->mapcache+i);
-
-		for (numbytes--; numbytes >= 0; numbytes--, p++) {
-			/*
-			** for only eight checks the following construction
-			** is faster than a loop-construction
-			*/
-			if ((*p) & 0x01)	cowdev->nrcowblocks++;
-			if ((*p) & 0x02)	cowdev->nrcowblocks++;
-			if ((*p) & 0x04)	cowdev->nrcowblocks++;
-			if ((*p) & 0x08)	cowdev->nrcowblocks++;
-			if ((*p) & 0x10)	cowdev->nrcowblocks++;
-			if ((*p) & 0x20)	cowdev->nrcowblocks++;
-			if ((*p) & 0x40)	cowdev->nrcowblocks++;
-			if ((*p) & 0x80)	cowdev->nrcowblocks++;
-		}
-	}
-
-	/*
-	** consistency-check for number of bits set in bitmap
-	*/
-	if ( !(cowdev->cowhead->flags & COWDIRTY) &&
-	    (cowdev->cowhead->cowused != cowdev->nrcowblocks) ) {
-		printk(KERN_ERR "cowloop - inconsistent cowfile admi\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
-** undo memory allocs and file opens issued so far
-** related to the cowfile
-*/
-static void
-cowlo_undo_opencow(struct cowloop_device *cowdev)
-{
-	int	i;
-
-	if (cowdev->mapcache) {
-		for (i=0; i < cowdev->mapcount; i++) {
-			if (*(cowdev->mapcache+i) != NULL)
-				kfree( *(cowdev->mapcache+i) );
-		}
-
-		kfree(cowdev->mapcache);
-	}
-
-	if (cowdev->cowhead)
-		kfree(cowdev->cowhead);
-
-	if ( (cowdev->state & COWCOWOPEN) && (cowdev->cowfp) )
-  		filp_close(cowdev->cowfp, 0);
-
-	/*
-	** mark cowfile closed
-	*/
-	cowdev->state &= ~COWCOWOPEN;
-}
-
-/*
-** flush the entire bitmap and the cowhead (clean) to the cowfile
-**
-** must be called with the cowdevices-lock set
-*/
-static void
-cowlo_sync(void)
-{
-	int			i, minor;
-	loff_t			offset;
-	struct cowloop_device	*cowdev;
-
-	for (minor=0; minor < maxcows;  minor++) {
-		cowdev = cowdevall[minor];
-		if ( ! (cowdev->state & COWRWCOWOPEN) )
-			continue;
-
-		for (i=0, offset=MAPUNIT; i < cowdev->mapcount;
-					i++, offset += MAPCHUNKSZ) {
-			unsigned long	numbytes;
-
-			if (i < (cowdev->mapcount-1))
-				/*
-				** full bitmap chunk
-				*/
-				numbytes = MAPCHUNKSZ;
-			else
-				/*
-				** last bitmap chunk: might be partly filled
-				*/
-				numbytes = cowdev->mapremain;
-
-			DEBUGP(DCOW
-			       "cowloop - flushing bitmap %2d (%3ld Kb)\n",
-							i, numbytes/1024);
-
-			if (cowlo_writecowraw(cowdev, *(cowdev->mapcache+i),
-						numbytes, offset) < numbytes) {
-				break;
-			}
-		}
-
-		/*
-		** flush clean up-to-date cowhead to cowfile
-		*/
-		cowdev->cowhead->cowused	 = cowdev->nrcowblocks;
-		cowdev->cowhead->flags		&= ~COWDIRTY;
-
-		DEBUGP(DCOW "cowloop - flushing cowhead (%3d Kb)\n",
-							MAPUNIT/1024);
-
-		cowlo_writecowraw(cowdev, cowdev->cowhead, MAPUNIT, (loff_t) 0);
-	}
-}
-
-/*****************************************************************************/
-/* Module loading/unloading                                                  */
-/*****************************************************************************/
-
-/*
-** called during insmod/modprobe
-*/
-static int __init
-cowlo_init_module(void)
-{
-	int	rv;
-	int	minor, uptocows;
-
-        revision[sizeof revision - 3] = '\0';
-
-        printk(KERN_NOTICE "cowloop - (C) 2009 ATComputing.nl - version: %s\n", &revision[11]);
-        printk(KERN_NOTICE "cowloop - info: www.ATComputing.nl/cowloop\n");
-
-	memset(allzeroes, 0, MAPUNIT);
-
-	/*
-	** Setup administration for all possible cowdevices.
-        ** Note that their minor numbers go from 0 to MAXCOWS-1 inclusive
-        ** and minor == MAXCOWS-1 is reserved for the control device.
-	*/
-	if ((maxcows < 1) || (maxcows > MAXCOWS)) {
-		printk(KERN_WARNING
-		       "cowloop - maxcows exceeds maximum of %d\n", MAXCOWS);
-
-                maxcows = DFLCOWS;
-        }
-
-	/* allocate room for a table with a pointer to each cowloop_device: */
-        if ( (cowdevall = kmalloc(maxcows * sizeof(struct cowloop_device *),
-							GFP_KERNEL)) == NULL) {
-		printk(KERN_WARNING
-		        "cowloop - can not alloc table for %d devs\n", maxcows);
-		uptocows = 0;
-		rv = -ENOMEM;
-		goto error_out;
-	}
-	memset(cowdevall, 0, maxcows * sizeof(struct cowloop_device *));
-	/* then hook an actual cowloop_device struct to each pointer: */
-	for (minor=0; minor < maxcows; minor++) {
-		if ((cowdevall[minor] = kmalloc(sizeof(struct cowloop_device),
-						GFP_KERNEL)) == NULL) {
-			printk(KERN_WARNING
-		           "cowloop - can not alloc admin-struct for dev no %d\n", minor);
-
-			uptocows = minor; /* this is how far we got.... */
-			rv = -ENOMEM;
-			goto error_out;
-		}
-        	memset(cowdevall[minor], 0, sizeof(struct cowloop_device));
-	}
-	uptocows = maxcows; /* we got all devices */
-
-	sema_init(&cowdevlock, 1);
-
-	/*
-	** register cowloop module
-	*/
-	if ( register_blkdev(COWMAJOR, DEVICE_NAME) < 0) {
-		printk(KERN_WARNING
-		    "cowloop - unable to get major %d for cowloop\n", COWMAJOR);
-		rv = -EIO;
-		goto error_out;
-	}
-
-	/*
-	** create a directory below /proc to allocate a file
-	** for each cowdevice that is allocated later on
-	*/
-	cowlo_procdir = proc_mkdir("cow", NULL);
-
-	/*
-	** check if a cowdevice has to be opened during insmod/modprobe;
-	** two parameters should be specified then: rdofile= and cowfile=
-	*/
-	if( (rdofile[0] != '\0') && (cowfile[0] != '\0') ) {
-		char	*po = option;
-		int	wantrecover = 0;
-
-		/*
-		** check if automatic recovery is wanted
-		*/
-		while (*po) {
-			if (*po == 'r') {
-				wantrecover = 1;
-				break;
-                        }
-			po++;
-		}
-
-		/*
-		** open new cowdevice with minor number 0
-		*/
-		if ( (rv = cowlo_openpair(rdofile, cowfile, wantrecover, 0))) {
-			remove_proc_entry("cow", NULL);
-			unregister_blkdev(COWMAJOR, DEVICE_NAME);
-			goto error_out;
-		}
-        } else {
-		/*
-		** check if only one parameter has been specified
-		*/
-		if( (rdofile[0] != '\0') || (cowfile[0] != '\0') ) {
-			printk(KERN_ERR
-			       "cowloop - only one filename specified\n");
-			remove_proc_entry("cow", NULL);
-			unregister_blkdev(COWMAJOR, DEVICE_NAME);
-			rv = -EINVAL;
-			goto error_out;
-		}
-	}
-
-	/*
-	** allocate fake disk as control channel to handle the requests
-	** to activate and deactivate cowdevices dynamically
-	*/
-	if (!(cowctlgd = alloc_disk(1))) {
-		printk(KERN_WARNING
-		       "cowloop - unable to alloc_disk for cowctl\n");
-
-		remove_proc_entry("cow", NULL);
-		(void) cowlo_closepair(cowdevall[0]);
-		unregister_blkdev(COWMAJOR, DEVICE_NAME);
-		rv = -ENOMEM;
-		goto error_out;
-	}
-
-	spin_lock_init(&cowctlrqlock);
-	cowctlgd->major        = COWMAJOR;
-	cowctlgd->first_minor  = COWCTL;
-	cowctlgd->minors       = 1;
-	cowctlgd->fops         = &cowlo_fops;
-	cowctlgd->private_data = NULL;
-	/* the device has capacity 0, so there will be no q-requests */
-	cowctlgd->queue = blk_init_queue(NULL, &cowctlrqlock);
-	sprintf(cowctlgd->disk_name, "cowctl");
-	set_capacity(cowctlgd, 0);
-
-	add_disk(cowctlgd);
-
-        printk(KERN_NOTICE "cowloop - number of configured cowdevices: %d\n",
-								maxcows);
-	if (rdofile[0] != '\0') {
-	    printk(KERN_NOTICE "cowloop - initialized on rdofile=%s\n",
-								rdofile);
-	} else {
-	    printk(KERN_NOTICE "cowloop - initialized without rdofile yet\n");
-	}
-	return 0;
-
-error_out:
-	for (minor=0; minor < uptocows ; minor++) {
-		kfree(cowdevall[minor]);
-	}
-	kfree(cowdevall);
-	return rv;
-}
-
-/*
-** called during rmmod
-*/
-static void __exit
-cowlo_cleanup_module(void)
-{
-	int	minor;
-
-	/*
-	** flush bitmaps and cowheads to the cowfiles
-	*/
-	down(&cowdevlock);
-	cowlo_sync();
-	up(&cowdevlock);
-
-	/*
-	** close all cowdevices
-	*/
-	for (minor=0; minor < maxcows;  minor++)
-		(void) cowlo_closepair(cowdevall[minor]);
-
-	unregister_blkdev(COWMAJOR, DEVICE_NAME);
-
-	/*
-	** get rid of /proc/cow and unregister the driver
-	*/
-	remove_proc_entry("cow", NULL);
-
-	for (minor = 0; minor < maxcows; minor++) {
-		kfree(cowdevall[minor]);
-	}
-	kfree(cowdevall);
-
-	del_gendisk(cowctlgd);  /* revert the alloc_disk() */
-	put_disk   (cowctlgd);  /* revert the add_disk()   */
-	blk_cleanup_queue(cowctlgd->queue); /* cleanup the empty queue */
-
-	printk(KERN_NOTICE "cowloop - unloaded\n");
-}
-
-module_init(cowlo_init_module);
-module_exit(cowlo_cleanup_module);
diff --git a/drivers/staging/cowloop/cowloop.h b/drivers/staging/cowloop/cowloop.h
deleted file mode 100644
index bbd4a35ac667..000000000000
--- a/drivers/staging/cowloop/cowloop.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
-** DO NOT MODIFY THESE VALUES (would make old cowfiles unusable)
-*/
-#define	MAPUNIT		1024		/* blocksize for bit in bitmap       */
-#define	MUSHIFT		10		/* bitshift  for bit in bitmap       */
-#define	MUMASK		0x3ff		/* bitmask   for bit in bitmap       */
-
-#define	COWMAGIC	0x574f437f	/* byte-swapped '7f C O W'           */
-#define	COWDIRTY	0x01
-#define	COWPACKED	0x02
-#define	COWVERSION	1
-
-struct cowhead
-{
-	int		magic;		/* identifies a cowfile              */
-	short		version;	/* version of cowhead                */
-	short		flags;    	/* flags indicating status           */
-	unsigned long	mapunit;	/* blocksize per bit in bitmap       */
-	unsigned long	mapsize;	/* total size of bitmap (bytes)      */
-	unsigned long	doffset;	/* start-offset datablocks in cow    */
-	unsigned long	rdoblocks;	/* size of related read-only file    */
-	unsigned long	rdofingerprint;	/* fingerprint of read-only file     */
-	unsigned long	cowused;	/* number of datablocks used in cow  */
-};
-
-#define COWDEVDIR	"/dev/cow/"
-#define COWDEVICE	COWDEVDIR "%ld"
-#define COWCONTROL	COWDEVDIR "ctl"
-
-#define MAXCOWS		1024
-#define COWCTL		(MAXCOWS-1)	/* minor number of /dev/cow/ctl     */
-
-#define COWPROCDIR	"/proc/cow/"
-#define COWPROCFILE	COWPROCDIR "%d"
-
-/*
-** ioctl related stuff
-*/
-#define ANYDEV		((unsigned long)-1)
-
-struct cowpair
-{
-	unsigned char	*rdofile;	/* pathname of the rdofile           */
-	unsigned char	*cowfile;	/* pathname of the cowfile           */
-	unsigned short	rdoflen;	/* length of rdofile pathname        */
-	unsigned short	cowflen;	/* length of cowfile pathname        */
-	unsigned long	device;		/* requested/returned device number  */
-};
-
-struct cowwatch
-{
-	int      	flags;		/* request flags                     */
-	unsigned long	device;		/* requested device number           */
-	unsigned long	threshold;	/* continue if free Kb < threshold   */
-	unsigned long	totalkb;	/* ret: total filesystem size (Kb)   */
-	unsigned long	availkb;	/* ret: free  filesystem size (Kb)   */
-};
-
-#define	WATCHWAIT	0x01		/* block until threshold reached     */
-
-#define	COWSYNC		_IO  ('C', 1)
-#define	COWMKPAIR	_IOW ('C', 2, struct cowpair)
-#define	COWRMPAIR	_IOW ('C', 3, unsigned long)
-#define	COWWATCH	_IOW ('C', 4, struct cowwatch)
-#define	COWCLOSE	_IOW ('C', 5, unsigned long)
-#define	COWRDOPEN	_IOW ('C', 6, unsigned long)
diff --git a/drivers/staging/dst/dcore.c b/drivers/staging/dst/dcore.c
index ac8577358ba0..c24e4e0367a2 100644
--- a/drivers/staging/dst/dcore.c
+++ b/drivers/staging/dst/dcore.c
@@ -102,7 +102,7 @@ static int dst_request(struct request_queue *q, struct bio *bio)
 	struct dst_node *n = q->queuedata;
 	int err = -EIO;
 
-	if (bio_empty_barrier(bio) && !q->prepare_discard_fn) {
+	if (bio_empty_barrier(bio) && !blk_queue_discard(q)) {
 		/*
 		 * This is a dirty^Wnice hack, but if we complete this
 		 * operation with -EOPNOTSUPP like intended, XFS
@@ -847,7 +847,7 @@ static dst_command_func dst_commands[] = {
 /*
  * Configuration parser.
  */
-static void cn_dst_callback(struct cn_msg *msg)
+static void cn_dst_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
 	struct dst_ctl *ctl;
 	int err;
@@ -855,6 +855,11 @@ static void cn_dst_callback(struct cn_msg *msg)
 	struct dst_node *n = NULL, *tmp;
 	unsigned int hash;
 
+	if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN)) {
+		err = -EPERM;
+		goto out;
+	}
+
 	if (msg->len < sizeof(struct dst_ctl)) {
 		err = -EBADMSG;
 		goto out;
diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h
index 6294d3814e72..2c3d65a622a7 100644
--- a/drivers/staging/et131x/et1310_address_map.h
+++ b/drivers/staging/et131x/et1310_address_map.h
@@ -223,7 +223,7 @@ typedef union _TXDMA_PR_NUM_DES_t {
 
 extern inline void add_10bit(u32 *v, int n)
 {
-	*v = INDEX10(*v + n);
+	*v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP);
 }
 
 /*
diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c
index 8f2e91fa0a86..10e21db57ac3 100644
--- a/drivers/staging/et131x/et1310_rx.c
+++ b/drivers/staging/et131x/et1310_rx.c
@@ -1177,12 +1177,20 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *etdev)
 
 static inline u32 bump_fbr(u32 *fbr, u32 limit)
 {
-	u32 v = *fbr;
-	add_10bit(&v, 1);
-	if (v > limit)
-		v = (*fbr & ~ET_DMA10_MASK) ^ ET_DMA10_WRAP;
-	*fbr = v;
-	return v;
+        u32 v = *fbr;
+        v++;
+        /* This works for all cases where limit < 1024. The 1023 case
+           works because 1023++ is 1024 which means the if condition is not
+           taken but the carry of the bit into the wrap bit toggles the wrap
+           value correctly */
+        if ((v & ET_DMA10_MASK) > limit) {
+                v &= ~ET_DMA10_MASK;
+                v ^= ET_DMA10_WRAP;
+        }
+        /* For the 1023 case */
+        v &= (ET_DMA10_MASK|ET_DMA10_WRAP);
+        *fbr = v;
+        return v;
 }
 
 /**
diff --git a/drivers/staging/hv/osd.c b/drivers/staging/hv/osd.c
index 8fe543bd9910..3a4793a0fd05 100644
--- a/drivers/staging/hv/osd.c
+++ b/drivers/staging/hv/osd.c
@@ -30,6 +30,7 @@
 #include <linux/ioport.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/wait.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index beb99a547f09..4586650d65c3 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig IIO
 	tristate "Industrial I/O support"
+	depends on !S390
 	---help---
 	  The industrial I/O subsystem provides a unified framework for
 	  drivers for many different types of embedded sensors using a
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
index 1fa18f255814..768f44894d08 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/staging/iio/industrialio-core.c
@@ -18,6 +18,8 @@
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
 #include <linux/cdev.h>
 #include "iio.h"
 #include "trigger_consumer.h"
diff --git a/drivers/staging/iio/light/tsl2561.c b/drivers/staging/iio/light/tsl2561.c
index ea8a5efc19bc..fc2107f4c049 100644
--- a/drivers/staging/iio/light/tsl2561.c
+++ b/drivers/staging/iio/light/tsl2561.c
@@ -239,10 +239,6 @@ static int __devexit tsl2561_remove(struct i2c_client *client)
 	return tsl2561_powerdown(client);
 }
 
-static unsigned short normal_i2c[] = { 0x29, 0x39, 0x49, I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
 static const struct i2c_device_id tsl2561_id[] = {
 	{ "tsl2561", 0 },
 	{ }
diff --git a/drivers/staging/p9auth/p9auth.c b/drivers/staging/p9auth/p9auth.c
index 9111dcba37a1..8ccfff723eec 100644
--- a/drivers/staging/p9auth/p9auth.c
+++ b/drivers/staging/p9auth/p9auth.c
@@ -183,7 +183,7 @@ static ssize_t cap_write(struct file *filp, const char __user *buf,
 	user_buf_running = NULL;
 	hash_str = NULL;
 	node_ptr = kmalloc(sizeof(struct cap_node), GFP_KERNEL);
-	user_buf = kzalloc(count, GFP_KERNEL);
+	user_buf = kzalloc(count+1, GFP_KERNEL);
 	if (!node_ptr || !user_buf)
 		goto out;
 
@@ -207,6 +207,7 @@ static ssize_t cap_write(struct file *filp, const char __user *buf,
 		list_add(&(node_ptr->list), &(dev->head->list));
 		node_ptr = NULL;
 	} else {
+		char *tmpu;
 		if (!cap_devices[0].head ||
 				list_empty(&(cap_devices[0].head->list))) {
 			retval = -EINVAL;
@@ -218,10 +219,10 @@ static ssize_t cap_write(struct file *filp, const char __user *buf,
 		 * need to split it and hash 'user1@user2' using 'randomstring'
 		 * as the key.
 		 */
-		user_buf_running = kstrdup(user_buf, GFP_KERNEL);
-		source_user = strsep(&user_buf_running, "@");
-		target_user = strsep(&user_buf_running, "@");
-		rand_str = strsep(&user_buf_running, "@");
+		tmpu = user_buf_running = kstrdup(user_buf, GFP_KERNEL);
+		source_user = strsep(&tmpu, "@");
+		target_user = strsep(&tmpu, "@");
+		rand_str = tmpu;
 		if (!source_user || !target_user || !rand_str) {
 			retval = -EINVAL;
 			goto out;
@@ -229,7 +230,8 @@ static ssize_t cap_write(struct file *filp, const char __user *buf,
 
 		/* hash the string user1@user2 with rand_str as the key */
 		len = strlen(source_user) + strlen(target_user) + 1;
-		hash_str = kzalloc(len, GFP_KERNEL);
+		/* src, @, len, \0 */
+		hash_str = kzalloc(len+1, GFP_KERNEL);
 		strcat(hash_str, source_user);
 		strcat(hash_str, "@");
 		strcat(hash_str, target_user);
diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c
index 0d111ddfabb2..2eb8e3d43c4d 100644
--- a/drivers/staging/poch/poch.c
+++ b/drivers/staging/poch/poch.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/ioctl.h>
 #include <linux/io.h>
+#include <linux/sched.h>
 
 #include "poch.h"
 
diff --git a/drivers/staging/pohmelfs/config.c b/drivers/staging/pohmelfs/config.c
index 90f962ee5fd8..5d04bf5b021a 100644
--- a/drivers/staging/pohmelfs/config.c
+++ b/drivers/staging/pohmelfs/config.c
@@ -527,10 +527,13 @@ out_unlock:
 	return err;
 }
 
-static void pohmelfs_cn_callback(struct cn_msg *msg)
+static void pohmelfs_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
 	int err;
 
+	if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN))
+		return;
+
 	switch (msg->flags) {
 		case POHMELFS_FLAGS_ADD:
 		case POHMELFS_FLAGS_DEL:
diff --git a/drivers/staging/rt2860/common/cmm_data_2860.c b/drivers/staging/rt2860/common/cmm_data_2860.c
index fb1735533b74..857ff450b6c9 100644
--- a/drivers/staging/rt2860/common/cmm_data_2860.c
+++ b/drivers/staging/rt2860/common/cmm_data_2860.c
@@ -363,6 +363,8 @@ int RtmpPCIMgmtKickOut(
 	ULONG			SwIdx = pAd->MgmtRing.TxCpuIdx;
 
 	pTxD  = (PTXD_STRUC) pAd->MgmtRing.Cell[SwIdx].AllocVa;
+	if (!pTxD)
+		return 0;
 
 	pAd->MgmtRing.Cell[SwIdx].pNdisPacket = pPacket;
 	pAd->MgmtRing.Cell[SwIdx].pNextNdisPacket = NULL;
diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c
index 9d589c240ed0..019cc4474ce8 100644
--- a/drivers/staging/rt2860/common/cmm_info.c
+++ b/drivers/staging/rt2860/common/cmm_info.c
@@ -25,6 +25,7 @@
  *************************************************************************
 */
 
+#include <linux/sched.h>
 #include "../rt_config.h"
 
 INT	Show_SSID_Proc(
diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c
index b396a9b570e2..ed27b8545a1b 100644
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -25,6 +25,7 @@
  *************************************************************************
  */
 
+#include <linux/sched.h>
 #include "rt_config.h"
 
 ULONG	RTDebugLevel = RT_DEBUG_ERROR;
diff --git a/drivers/staging/rt3090/common/cmm_info.c b/drivers/staging/rt3090/common/cmm_info.c
index 5be0714666cb..3e51e98b474c 100644
--- a/drivers/staging/rt3090/common/cmm_info.c
+++ b/drivers/staging/rt3090/common/cmm_info.c
@@ -34,6 +34,7 @@
     ---------    ----------    ----------------------------------------------
  */
 
+#include <linux/sched.h>
 #include "../rt_config.h"
 
 
diff --git a/drivers/staging/rt3090/rt_linux.c b/drivers/staging/rt3090/rt_linux.c
index d2241ecdf583..9b94aa6eb904 100644
--- a/drivers/staging/rt3090/rt_linux.c
+++ b/drivers/staging/rt3090/rt_linux.c
@@ -25,6 +25,7 @@
  *************************************************************************
  */
 
+#include <linux/sched.h>
 #include "rt_config.h"
 
 ULONG	RTDebugLevel = RT_DEBUG_ERROR;
diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c
index d4fa65489655..b0802a7aeb5f 100644
--- a/drivers/staging/rtl8192e/r8192E_core.c
+++ b/drivers/staging/rtl8192e/r8192E_core.c
@@ -46,6 +46,7 @@
 #undef DEBUG_TX_DESC
 
 //#define CONFIG_RTL8192_IO_MAP
+#include <linux/vmalloc.h>
 #include <asm/uaccess.h>
 #include "r8192E_hw.h"
 #include "r8192E.h"
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
index 87f8a1192762..f890a16096c0 100644
--- a/drivers/staging/sep/sep_driver.c
+++ b/drivers/staging/sep/sep_driver.c
@@ -38,6 +38,7 @@
 #include <linux/mm.h>
 #include <linux/poll.h>
 #include <linux/wait.h>
+#include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/firmware.h>
 #include <asm/ioctl.h>
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/staging/vme/bridges/vme_ca91cx42.c
index 3d2a84c45829..e139eaeaa174 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.c
+++ b/drivers/staging/vme/bridges/vme_ca91cx42.c
@@ -25,6 +25,7 @@
 #include <linux/poll.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/sched.h>
 #include <asm/time.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c
index 8960fa9ee7aa..00fe0803c21c 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/staging/vme/bridges/vme_tsi148.c
@@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/sched.h>
 #include <asm/time.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 8950724f168e..067082a7d759 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -51,10 +51,26 @@ static struct ieee80211_supported_band wbsoft_band_2GHz = {
 	.n_bitrates	= ARRAY_SIZE(wbsoft_rates),
 };
 
+static void hal_set_beacon_period(struct hw_data *pHwData, u16 beacon_period)
+{
+	u32 tmp;
+
+	if (pHwData->SurpriseRemove)
+		return;
+
+	pHwData->BeaconPeriod = beacon_period;
+	tmp = pHwData->BeaconPeriod << 16;
+	tmp |= pHwData->ProbeDelay;
+	Wb35Reg_Write(pHwData, 0x0848, tmp);
+}
+
 static int wbsoft_add_interface(struct ieee80211_hw *dev,
 				struct ieee80211_if_init_conf *conf)
 {
-	printk("wbsoft_add interface called\n");
+	struct wbsoft_priv *priv = dev->priv;
+
+	hal_set_beacon_period(&priv->sHwData, conf->vif->bss_conf.beacon_int);
+
 	return 0;
 }
 
@@ -83,10 +99,16 @@ static int wbsoft_get_tx_stats(struct ieee80211_hw *hw,
 	return 0;
 }
 
+static u64 wbsoft_prepare_multicast(struct ieee80211_hw *hw, int mc_count,
+				    struct dev_addr_list *mc_list)
+{
+	return mc_count;
+}
+
 static void wbsoft_configure_filter(struct ieee80211_hw *dev,
 				    unsigned int changed_flags,
 				    unsigned int *total_flags,
-				    int mc_count, struct dev_mc_list *mclist)
+				    u64 multicast)
 {
 	unsigned int new_flags;
 
@@ -94,7 +116,7 @@ static void wbsoft_configure_filter(struct ieee80211_hw *dev,
 
 	if (*total_flags & FIF_PROMISC_IN_BSS)
 		new_flags |= FIF_PROMISC_IN_BSS;
-	else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32))
+	else if ((*total_flags & FIF_ALLMULTI) || (multicast > 32))
 		new_flags |= FIF_ALLMULTI;
 
 	dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
@@ -138,19 +160,6 @@ static void hal_set_radio_mode(struct hw_data *pHwData, unsigned char radio_off)
 	Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl);
 }
 
-static void hal_set_beacon_period(struct hw_data *pHwData, u16 beacon_period)
-{
-	u32 tmp;
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	pHwData->BeaconPeriod = beacon_period;
-	tmp = pHwData->BeaconPeriod << 16;
-	tmp |= pHwData->ProbeDelay;
-	Wb35Reg_Write(pHwData, 0x0848, tmp);
-}
-
 static void
 hal_set_current_channel_ex(struct hw_data *pHwData, ChanInfo channel)
 {
@@ -244,7 +253,6 @@ static void hal_set_accept_beacon(struct hw_data *pHwData, u8 enable)
 static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
 {
 	struct wbsoft_priv *priv = dev->priv;
-	struct ieee80211_conf *conf = &dev->conf;
 	ChanInfo ch;
 
 	printk("wbsoft_config called\n");
@@ -254,7 +262,6 @@ static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
 	ch.ChanNo = 1;
 
 	hal_set_current_channel(&priv->sHwData, ch);
-	hal_set_beacon_period(&priv->sHwData, conf->beacon_int);
 	hal_set_accept_broadcast(&priv->sHwData, 1);
 	hal_set_accept_promiscuous(&priv->sHwData, 1);
 	hal_set_accept_multicast(&priv->sHwData, 1);
@@ -277,6 +284,7 @@ static const struct ieee80211_ops wbsoft_ops = {
 	.add_interface		= wbsoft_add_interface,
 	.remove_interface	= wbsoft_remove_interface,
 	.config			= wbsoft_config,
+	.prepare_multicast	= wbsoft_prepare_multicast,
 	.configure_filter	= wbsoft_configure_filter,
 	.get_stats		= wbsoft_get_stats,
 	.get_tx_stats		= wbsoft_get_tx_stats,
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index a9d707047202..e941367dd28f 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -19,6 +19,7 @@
 #include <linux/device.h>
 #include <linux/mm.h>
 #include <linux/idr.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/kobject.h>
 #include <linux/uio_driver.h>
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 333ee02e7b2b..2473cf0c6b1d 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -39,7 +39,7 @@
 #define USBTMC_SIZE_IOBUFFER	2048
 
 /* Default USB timeout (in milliseconds) */
-#define USBTMC_TIMEOUT		10
+#define USBTMC_TIMEOUT		5000
 
 /*
  * Maximum number of read cycles to empty bulk in endpoint during CLEAR and
@@ -993,7 +993,7 @@ skip_io_on_zombie:
 	return retval;
 }
 
-static struct file_operations fops = {
+static const struct file_operations fops = {
 	.owner		= THIS_MODULE,
 	.read		= usbtmc_read,
 	.write		= usbtmc_write,
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 33351312327f..a18e3c5dd82e 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -223,6 +223,7 @@ config USB_OTG
 config USB_GADGET_PXA25X
 	boolean "PXA 25x or IXP 4xx"
 	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+	select USB_OTG_UTILS
 	help
 	   Intel's PXA 25x series XScale ARM-5TE processors include
 	   an integrated full speed USB 1.1 device controller.  The
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index f37de283d0ab..167cb2a8ecef 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -61,11 +61,6 @@
  * simpler, Microsoft pushes their own approach: RNDIS.  The published
  * RNDIS specs are ambiguous and appear to be incomplete, and are also
  * needlessly complex.  They borrow more from CDC ACM than CDC ECM.
- *
- * While CDC ECM, CDC Subset, and RNDIS are designed to extend the ethernet
- * interface to the target, CDC EEM was designed to use ethernet over the USB
- * link between the host and target.  CDC EEM is implemented as an alternative
- * to those other protocols when that communication model is more appropriate
  */
 
 #define DRIVER_DESC		"Ethernet Gadget"
@@ -157,8 +152,8 @@ static inline bool has_rndis(void)
 #define RNDIS_PRODUCT_NUM	0xa4a2	/* Ethernet/RNDIS Gadget */
 
 /* For EEM gadgets */
-#define EEM_VENDOR_NUM	0x0525	/* INVALID - NEEDS TO BE ALLOCATED */
-#define EEM_PRODUCT_NUM	0xa4a1	/* INVALID - NEEDS TO BE ALLOCATED */
+#define EEM_VENDOR_NUM		0x1d6b	/* Linux Foundation */
+#define EEM_PRODUCT_NUM		0x0102	/* EEM Gadget */
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index c52a681f376c..01ee0b9bc957 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1402,7 +1402,8 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 	struct clk *clk;
 	void __iomem *base;
 	int ret = 0;
-	int i, res_size;
+	int i;
+	resource_size_t res_size;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -1416,7 +1417,7 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	res_size = res->end - res->start + 1;
+	res_size = resource_size(res);
 	if (!request_mem_region(res->start, res_size, res->name)) {
 		dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n",
 			res_size, res->start);
@@ -1527,8 +1528,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
 	clk_disable(imx_usb->clk);
 	iounmap(imx_usb->base);
 
-	release_mem_region(imx_usb->res->start,
-		imx_usb->res->end - imx_usb->res->start + 1);
+	release_mem_region(imx_usb->res->start, resource_size(imx_usb->res));
 
 	if (pdata->exit)
 		pdata->exit(&pdev->dev);
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index c44367fea185..bf0f6520c6df 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -30,6 +30,7 @@
 #include <linux/wait.h>
 #include <linux/compiler.h>
 #include <asm/uaccess.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/poll.h>
 #include <linux/smp_lock.h>
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 29500154d00c..2d867fd22413 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -875,7 +875,7 @@ printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
 }
 
 /* used after endpoint configuration */
-static struct file_operations printer_io_operations = {
+static const struct file_operations printer_io_operations = {
 	.owner =	THIS_MODULE,
 	.open =		printer_open,
 	.read =		printer_read,
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 03087e7b9190..9a537aa07968 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -131,31 +131,48 @@ static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 }
 
 static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
-				      unsigned long offset, u16 *buf,
+				      unsigned long offset,
+				      unsigned char *buf,
 				      int len)
 {
+	unsigned long fifoaddr = r8a66597->reg + offset;
+	unsigned int data;
+	int i;
+
 	if (r8a66597->pdata->on_chip) {
-		unsigned long fifoaddr = r8a66597->reg + offset;
-		unsigned long count;
-		union {
-			unsigned long dword;
-			unsigned char byte[4];
-		} data;
-		unsigned char *pb;
-		int i;
-
-		count = len / 4;
-		insl(fifoaddr, buf, count);
-
-		if (len & 0x00000003) {
-			data.dword = inl(fifoaddr);
-			pb = (unsigned char *)buf + count * 4;
-			for (i = 0; i < (len & 0x00000003); i++)
-				pb[i] = data.byte[i];
+		/* 32-bit accesses for on_chip controllers */
+
+		/* aligned buf case */
+		if (len >= 4 && !((unsigned long)buf & 0x03)) {
+			insl(fifoaddr, buf, len / 4);
+			buf += len & ~0x03;
+			len &= 0x03;
+		}
+
+		/* unaligned buf case */
+		for (i = 0; i < len; i++) {
+			if (!(i & 0x03))
+				data = inl(fifoaddr);
+
+			buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
 		}
 	} else {
-		len = (len + 1) / 2;
-		insw(r8a66597->reg + offset, buf, len);
+		/* 16-bit accesses for external controllers */
+
+		/* aligned buf case */
+		if (len >= 2 && !((unsigned long)buf & 0x01)) {
+			insw(fifoaddr, buf, len / 2);
+			buf += len & ~0x01;
+			len &= 0x01;
+		}
+
+		/* unaligned buf case */
+		for (i = 0; i < len; i++) {
+			if (!(i & 0x01))
+				data = inw(fifoaddr);
+
+			buf[i] = (data >> ((i & 0x01) * 8)) & 0xff;
+		}
 	}
 }
 
@@ -166,38 +183,40 @@ static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 }
 
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
-				       unsigned long offset, u16 *buf,
+				       unsigned long offset,
+				       unsigned char *buf,
 				       int len)
 {
 	unsigned long fifoaddr = r8a66597->reg + offset;
+	int adj = 0;
+	int i;
 
 	if (r8a66597->pdata->on_chip) {
-		unsigned long count;
-		unsigned char *pb;
-		int i;
-
-		count = len / 4;
-		outsl(fifoaddr, buf, count);
-
-		if (len & 0x00000003) {
-			pb = (unsigned char *)buf + count * 4;
-			for (i = 0; i < (len & 0x00000003); i++) {
-				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
-					outb(pb[i], fifoaddr + i);
-				else
-					outb(pb[i], fifoaddr + 3 - i);
-			}
+		/* 32-bit access only if buf is 32-bit aligned */
+		if (len >= 4 && !((unsigned long)buf & 0x03)) {
+			outsl(fifoaddr, buf, len / 4);
+			buf += len & ~0x03;
+			len &= 0x03;
 		}
 	} else {
-		int odd = len & 0x0001;
-
-		len = len / 2;
-		outsw(fifoaddr, buf, len);
-		if (unlikely(odd)) {
-			buf = &buf[len];
-			outb((unsigned char)*buf, fifoaddr);
+		/* 16-bit access only if buf is 16-bit aligned */
+		if (len >= 2 && !((unsigned long)buf & 0x01)) {
+			outsw(fifoaddr, buf, len / 2);
+			buf += len & ~0x01;
+			len &= 0x01;
 		}
 	}
+
+	/* adjust fifo address in the little endian case */
+	if (!(r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)) {
+		if (r8a66597->pdata->on_chip)
+			adj = 0x03; /* 32-bit wide */
+		else
+			adj = 0x01; /* 16-bit wide */
+	}
+
+	for (i = 0; i < len; i++)
+		outb(buf[i], fifoaddr + adj - (i & adj));
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 3ea05936851f..b25cdea93a1f 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1400,6 +1400,10 @@ iso_stream_schedule (
 		goto fail;
 	}
 
+	period = urb->interval;
+	if (!stream->highspeed)
+		period <<= 3;
+
 	now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
 
 	/* when's the last uframe this urb could start? */
@@ -1417,14 +1421,15 @@ iso_stream_schedule (
 
 		/* Fell behind (by up to twice the slop amount)? */
 		if (start >= max - 2 * 8 * SCHEDULE_SLOP)
-			start += stream->interval * DIV_ROUND_UP(
-					max - start, stream->interval) - mod;
+			start += period * DIV_ROUND_UP(
+					max - start, period) - mod;
 
 		/* Tried to schedule too far into the future? */
 		if (unlikely((start + sched->span) >= max)) {
 			status = -EFBIG;
 			goto fail;
 		}
+		stream->next_uframe = start;
 		goto ready;
 	}
 
@@ -1440,10 +1445,6 @@ iso_stream_schedule (
 
 	/* NOTE:  assumes URB_ISO_ASAP, to limit complexity/bugs */
 
-	period = urb->interval;
-	if (!stream->highspeed)
-		period <<= 3;
-
 	/* find a uframe slot with enough bandwidth */
 	for (; start < (stream->next_uframe + period); start++) {
 		int		enough_space;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index e35d82808bab..5c774ab98252 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2284,10 +2284,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd)
 	dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
 	dev_info(hcd->self.controller, "  ISTL:    2 * %4d:     %4d @ $%04x:$%04x\n",
 		 istl_size / 2, istl_size, 0, istl_size / 2);
-	dev_info(hcd->self.controller, "  INTL: %4d * (%3u+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  INTL: %4d * (%3lu+8):  %4d @ $%04x\n",
 		 ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
 		 intl_size, istl_size);
-	dev_info(hcd->self.controller, "  ATL : %4d * (%3u+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  ATL : %4d * (%3lu+8):  %4d @ $%04x\n",
 		 atl_buffers, atl_blksize - PTD_HEADER_SIZE,
 		 atl_size, istl_size + intl_size);
 	dev_info(hcd->self.controller, "  USED/FREE:   %4d      %4d\n", total,
@@ -2677,12 +2677,12 @@ static int __devexit isp1362_remove(struct platform_device *pdev)
 	DBG(0, "%s: Removing HCD\n", __func__);
 	usb_remove_hcd(hcd);
 
-	DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__,
-	    (u32)isp1362_hcd->data_reg);
+	DBG(0, "%s: Unmapping data_reg @ %p\n", __func__,
+	    isp1362_hcd->data_reg);
 	iounmap(isp1362_hcd->data_reg);
 
-	DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__,
-	    (u32)isp1362_hcd->addr_reg);
+	DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__,
+	    isp1362_hcd->addr_reg);
 	iounmap(isp1362_hcd->addr_reg);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -2810,16 +2810,16 @@ static int __init isp1362_probe(struct platform_device *pdev)
 	return 0;
 
  err6:
-	DBG(0, "%s: Freeing dev %08x\n", __func__, (u32)isp1362_hcd);
+	DBG(0, "%s: Freeing dev %p\n", __func__, isp1362_hcd);
 	usb_put_hcd(hcd);
  err5:
-	DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__, (u32)data_reg);
+	DBG(0, "%s: Unmapping data_reg @ %p\n", __func__, data_reg);
 	iounmap(data_reg);
  err4:
 	DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)data->start);
 	release_mem_region(data->start, resource_len(data));
  err3:
-	DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__, (u32)addr_reg);
+	DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__, addr_reg);
 	iounmap(addr_reg);
  err2:
 	DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)addr->start);
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index fe60f62a32f3..1a253ebf7e50 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -580,7 +580,7 @@ static inline const char *ISP1362_INT_NAME(int n)
 
 static inline void ALIGNSTAT(struct isp1362_hcd *isp1362_hcd, void *ptr)
 {
-	unsigned p = (unsigned)ptr;
+	unsigned long p = (unsigned long)ptr;
 	if (!(p & 0xf))
 		isp1362_hcd->stat16++;
 	else if (!(p & 0x7))
@@ -770,7 +770,7 @@ static void isp1362_write_fifo(struct isp1362_hcd *isp1362_hcd, void *buf, u16 l
 	if (!len)
 		return;
 
-	if ((unsigned)dp & 0x1) {
+	if ((unsigned long)dp & 0x1) {
 		/* not aligned */
 		for (; len > 1; len -= 2) {
 			data = *dp++;
@@ -962,8 +962,8 @@ static void isp1362_read_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16
 
 	isp1362_write_diraddr(isp1362_hcd, offset, len);
 
-	DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %08x\n", __func__,
-	    len, offset, (u32)buf);
+	DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %p\n",
+	    __func__, len, offset, buf);
 
 	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
 	_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
@@ -982,8 +982,8 @@ static void isp1362_write_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16
 
 	isp1362_write_diraddr(isp1362_hcd, offset, len);
 
-	DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %08x\n", __func__,
-	    len, offset, (u32)buf);
+	DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %p\n",
+	    __func__, len, offset, buf);
 
 	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
 	_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 23cf3bde4762..83b5f9cea85a 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -475,4 +475,4 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
 		quirk_usb_handoff_xhci(pdev);
 }
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index c632437c7649..562eba108816 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -115,6 +115,10 @@ static uint32_t process_qset(struct whc *whc, struct whc_qset *qset)
 		if (status & QTD_STS_HALTED) {
 			/* Ug, an error. */
 			process_halted_qtd(whc, qset, td);
+			/* A halted qTD always triggers an update
+			   because the qset was either removed or
+			   reactivated. */
+			update |= WHC_UPDATE_UPDATED;
 			goto done;
 		}
 
@@ -305,6 +309,7 @@ int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
 	struct whc_urb *wurb = urb->hcpriv;
 	struct whc_qset *qset = wurb->qset;
 	struct whc_std *std, *t;
+	bool has_qtd = false;
 	int ret;
 	unsigned long flags;
 
@@ -315,17 +320,21 @@ int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
 		goto out;
 
 	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
-		if (std->urb == urb)
+		if (std->urb == urb) {
+			if (std->qtd)
+				has_qtd = true;
 			qset_free_std(whc, std);
-		else
+		} else
 			std->qtd = NULL; /* so this std is re-added when the qset is */
 	}
 
-	asl_qset_remove(whc, qset);
-	wurb->status = status;
-	wurb->is_async = true;
-	queue_work(whc->workqueue, &wurb->dequeue_work);
-
+	if (has_qtd) {
+		asl_qset_remove(whc, qset);
+		wurb->status = status;
+		wurb->is_async = true;
+		queue_work(whc->workqueue, &wurb->dequeue_work);
+	} else
+		qset_remove_urb(whc, qset, urb, status);
 out:
 	spin_unlock_irqrestore(&whc->lock, flags);
 
diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c
index cf2d45946c57..2273c815941f 100644
--- a/drivers/usb/host/whci/debug.c
+++ b/drivers/usb/host/whci/debug.c
@@ -134,7 +134,7 @@ static int pzl_open(struct inode *inode, struct file *file)
 	return single_open(file, pzl_print, inode->i_private);
 }
 
-static struct file_operations di_fops = {
+static const struct file_operations di_fops = {
 	.open    = di_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
@@ -142,7 +142,7 @@ static struct file_operations di_fops = {
 	.owner   = THIS_MODULE,
 };
 
-static struct file_operations asl_fops = {
+static const struct file_operations asl_fops = {
 	.open    = asl_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
@@ -150,7 +150,7 @@ static struct file_operations asl_fops = {
 	.owner   = THIS_MODULE,
 };
 
-static struct file_operations pzl_fops = {
+static const struct file_operations pzl_fops = {
 	.open    = pzl_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index a9e05bac6646..0db3fb2dc03a 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -121,6 +121,10 @@ static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset)
 		if (status & QTD_STS_HALTED) {
 			/* Ug, an error. */
 			process_halted_qtd(whc, qset, td);
+			/* A halted qTD always triggers an update
+			   because the qset was either removed or
+			   reactivated. */
+			update |= WHC_UPDATE_UPDATED;
 			goto done;
 		}
 
@@ -333,6 +337,7 @@ int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
 	struct whc_urb *wurb = urb->hcpriv;
 	struct whc_qset *qset = wurb->qset;
 	struct whc_std *std, *t;
+	bool has_qtd = false;
 	int ret;
 	unsigned long flags;
 
@@ -343,17 +348,22 @@ int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
 		goto out;
 
 	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
-		if (std->urb == urb)
+		if (std->urb == urb) {
+			if (std->qtd)
+				has_qtd = true;
 			qset_free_std(whc, std);
-		else
+		} else
 			std->qtd = NULL; /* so this std is re-added when the qset is */
 	}
 
-	pzl_qset_remove(whc, qset);
-	wurb->status = status;
-	wurb->is_async = false;
-	queue_work(whc->workqueue, &wurb->dequeue_work);
-
+	if (has_qtd) {
+		pzl_qset_remove(whc, qset);
+		update_pzl_hw_view(whc);
+		wurb->status = status;
+		wurb->is_async = false;
+		queue_work(whc->workqueue, &wurb->dequeue_work);
+	} else
+		qset_remove_urb(whc, qset, urb, status);
 out:
 	spin_unlock_irqrestore(&whc->lock, flags);
 
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index 99911e727e0b..932f99938481 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -335,6 +335,12 @@ void xhci_event_ring_work(unsigned long arg)
 	spin_lock_irqsave(&xhci->lock, flags);
 	temp = xhci_readl(xhci, &xhci->op_regs->status);
 	xhci_dbg(xhci, "op reg status = 0x%x\n", temp);
+	if (temp == 0xffffffff) {
+		xhci_dbg(xhci, "HW died, polling stopped.\n");
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
+	}
+
 	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
 	xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp);
 	xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled);
@@ -776,6 +782,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
 	unsigned long flags;
 	int ret;
+	u32 temp;
 	struct xhci_hcd *xhci;
 	struct xhci_td *td;
 	unsigned int ep_index;
@@ -788,6 +795,17 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
 	if (ret || !urb->hcpriv)
 		goto done;
+	temp = xhci_readl(xhci, &xhci->op_regs->status);
+	if (temp == 0xffffffff) {
+		xhci_dbg(xhci, "HW died, freeing TD.\n");
+		td = (struct xhci_td *) urb->hcpriv;
+
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN);
+		kfree(td);
+		return ret;
+	}
 
 	xhci_dbg(xhci, "Cancel URB %p\n", urb);
 	xhci_dbg(xhci, "Event ring:\n");
@@ -877,7 +895,7 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	ctrl_ctx->drop_flags |= drop_flag;
 	new_drop_flags = ctrl_ctx->drop_flags;
 
-	ctrl_ctx->add_flags = ~drop_flag;
+	ctrl_ctx->add_flags &= ~drop_flag;
 	new_add_flags = ctrl_ctx->add_flags;
 
 	last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
@@ -1410,11 +1428,20 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	unsigned long flags;
+	u32 state;
 
 	if (udev->slot_id == 0)
 		return;
 
 	spin_lock_irqsave(&xhci->lock, flags);
+	/* Don't disable the slot if the host controller is dead. */
+	state = xhci_readl(xhci, &xhci->op_regs->status);
+	if (state == 0xffffffff) {
+		xhci_free_virt_device(xhci, udev->slot_id);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
+	}
+
 	if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index d645f3899fe1..32d0199d0c32 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -429,8 +429,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
 	return read_count;
 }
 
-static struct
-file_operations usb_rio_fops = {
+static const struct file_operations usb_rio_fops = {
 	.owner =	THIS_MODULE,
 	.read =		read_rio,
 	.write =	write_rio,
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 29092b8e59ce..4fb120357c55 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -313,7 +313,8 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id
 
 	if (le16_to_cpu(dev->udev->descriptor.idProduct) != 0x0001) {
 		dev_warn(&interface->dev, "USBLCD model not supported.\n");
-		return -ENODEV;
+		retval = -ENODEV;
+		goto error;
 	}
 	
 	/* set up the endpoint information */
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 803adcb5ac1d..b84abd8ee8a5 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -8,8 +8,8 @@ comment "Enable Host or Gadget support to see Inventra options"
 
 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
 config USB_MUSB_HDRC
-	depends on (USB || USB_GADGET) && HAVE_CLK
-	depends on !SUPERH
+	depends on (USB || USB_GADGET)
+	depends on (ARM || BLACKFIN)
 	select NOP_USB_XCEIV if ARCH_DAVINCI
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select NOP_USB_XCEIV if MACH_OMAP3EVM
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index f2f66ebc7362..fcec87ea709e 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -14,7 +14,6 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/list.h>
-#include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 381d648a36b8..6aa5f22e5274 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -95,6 +95,13 @@ struct musb_ep;
 #endif
 #endif	/* need MUSB gadget selection */
 
+#ifndef CONFIG_HAVE_CLK
+/* Dummy stub for clk framework */
+#define clk_get(dev, id)	NULL
+#define clk_put(clock)		do {} while (0)
+#define clk_enable(clock)	do {} while (0)
+#define clk_disable(clock)	do {} while (0)
+#endif
 
 #ifdef CONFIG_PROC_FS
 #include <linux/fs.h>
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index fbfd3fd9ce1f..cc1d71b57d3c 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -439,15 +439,6 @@ static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
 /* Not implemented - HW has seperate Tx/Rx FIFO */
 #define MUSB_TXCSR_MODE			0x0000
 
-/*
- * Dummy stub for clk framework, it will be removed
- * until Blackfin supports clk framework
- */
-#define clk_get(dev, id)	NULL
-#define clk_put(clock)		do {} while (0)
-#define clk_enable(clock)	do {} while (0)
-#define clk_disable(clock)	do {} while (0)
-
 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
 {
 }
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 2cbfab3716e5..b10ac8409411 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -554,13 +554,12 @@ static void aircable_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
+	spin_lock_irq(&priv->rx_lock);
 	priv->rx_flags |= THROTTLED;
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_unlock_irq(&priv->rx_lock);
 }
 
 /* Based on ftdi_sio.c unthrottle */
@@ -569,14 +568,13 @@ static void aircable_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled;
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
+	spin_lock_irq(&priv->rx_lock);
 	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
 	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_unlock_irq(&priv->rx_lock);
 
 	if (actually_throttled)
 		schedule_work(&priv->rx_work);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 4a208fe85bc9..698252a4dc5d 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -113,6 +113,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e0a8b715f2f2..a591ebec0f89 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1155,13 +1155,12 @@ static void cypress_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->rx_flags = THROTTLED;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 }
 
 
@@ -1170,14 +1169,13 @@ static void cypress_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled, result;
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
 	priv->rx_flags = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 
 	if (!priv->comm_is_ok)
 		return;
@@ -1185,7 +1183,7 @@ static void cypress_unthrottle(struct tty_struct *tty)
 	if (actually_throttled) {
 		port->interrupt_in_urb->dev = port->serial->dev;
 
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (result) {
 			dev_err(&port->dev, "%s - failed submitting read urb, "
 					"error %d\n", __func__, result);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index ab3dd991586b..68e80be6b9e1 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -898,16 +898,16 @@ static void digi_rx_unthrottle(struct tty_struct *tty)
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
-	/* turn throttle off */
-	priv->dp_throttled = 0;
-	priv->dp_throttle_restart = 0;
-
 	/* restart read chain */
 	if (priv->dp_throttle_restart) {
 		port->read_urb->dev = port->serial->dev;
 		ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	}
 
+	/* turn throttle off */
+	priv->dp_throttled = 0;
+	priv->dp_throttle_restart = 0;
+
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 
 	if (ret)
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 33c9e9cf9eb2..7dd0e3eadbe6 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -391,7 +391,7 @@ static void empeg_unthrottle(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev,
 			"%s - failed submitting read urb, error %d\n",
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4f883b1773d0..9c60d6d4908a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -76,13 +76,7 @@ struct ftdi_private {
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
-	__u8 rx_flags;		/* receive state flags (throttling) */
-	spinlock_t rx_lock;	/* spinlock for receive state */
-	struct delayed_work rx_work;
 	struct usb_serial_port *port;
-	int rx_processed;
-	unsigned long rx_bytes;
-
 	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
 				   (0 for FT232/245) */
 
@@ -737,10 +731,6 @@ static const char *ftdi_chip_name[] = {
 /* Constants for read urb and write urb */
 #define BUFSZ 512
 
-/* rx_flags */
-#define THROTTLED		0x01
-#define ACTUALLY_THROTTLED	0x02
-
 /* Used for TIOCMIWAIT */
 #define FTDI_STATUS_B0_MASK	(FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
 #define FTDI_STATUS_B1_MASK	(FTDI_RS_BI)
@@ -763,7 +753,7 @@ static int  ftdi_write_room(struct tty_struct *tty);
 static int  ftdi_chars_in_buffer(struct tty_struct *tty);
 static void ftdi_write_bulk_callback(struct urb *urb);
 static void ftdi_read_bulk_callback(struct urb *urb);
-static void ftdi_process_read(struct work_struct *work);
+static void ftdi_process_read(struct usb_serial_port *port);
 static void ftdi_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static int  ftdi_tiocmget(struct tty_struct *tty, struct file *file);
@@ -1234,7 +1224,6 @@ static int set_serial_info(struct tty_struct *tty,
 					(new_serial.flags & ASYNC_FLAGS));
 	priv->custom_divisor = new_serial.custom_divisor;
 
-	tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 	write_latency_timer(port);
 
 check_and_exit:
@@ -1527,7 +1516,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	}
 
 	kref_init(&priv->kref);
-	spin_lock_init(&priv->rx_lock);
 	spin_lock_init(&priv->tx_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
 	/* This will push the characters through immediately rather
@@ -1549,7 +1537,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 		port->read_urb->transfer_buffer_length = BUFSZ;
 	}
 
-	INIT_DELAYED_WORK(&priv->rx_work, ftdi_process_read);
 	priv->port = port;
 
 	/* Free port's existing write urb and transfer buffer. */
@@ -1686,6 +1673,26 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
+static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
+{
+	struct urb *urb = port->read_urb;
+	struct usb_serial *serial = port->serial;
+	int result;
+
+	usb_fill_bulk_urb(urb, serial->dev,
+			   usb_rcvbulkpipe(serial->dev,
+					port->bulk_in_endpointAddress),
+			   urb->transfer_buffer,
+			   urb->transfer_buffer_length,
+			   ftdi_read_bulk_callback, port);
+	result = usb_submit_urb(urb, mem_flags);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
+	return result;
+}
+
 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 { /* ftdi_open */
 	struct usb_device *dev = port->serial->dev;
@@ -1700,12 +1707,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	priv->tx_bytes = 0;
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_bytes = 0;
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
-
-	if (tty)
-		tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	write_latency_timer(port);
 
@@ -1725,23 +1726,14 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 		ftdi_set_termios(tty, port, tty->termios);
 
 	/* Not throttled */
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttled = 0;
+	port->throttle_req = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	/* Start reading from the device */
-	priv->rx_processed = 0;
-	usb_fill_bulk_urb(port->read_urb, dev,
-			usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-				port->read_urb->transfer_buffer_length,
-			ftdi_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-	else
+	result = ftdi_submit_read_urb(port, GFP_KERNEL);
+	if (!result)
 		kref_get(&priv->kref);
 
 	return result;
@@ -1787,10 +1779,6 @@ static void ftdi_close(struct usb_serial_port *port)
 
 	dbg("%s", __func__);
 
-
-	/* cancel any scheduled reading */
-	cancel_delayed_work_sync(&priv->rx_work);
-
 	/* shutdown our bulk read */
 	usb_kill_urb(port->read_urb);
 	kref_put(&priv->kref, ftdi_sio_priv_release);
@@ -2013,271 +2001,121 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty)
 	return buffered;
 }
 
-static void ftdi_read_bulk_callback(struct urb *urb)
+static int ftdi_process_packet(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ftdi_private *priv,
+		char *packet, int len)
 {
-	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty;
-	struct ftdi_private *priv;
-	unsigned long countread;
-	unsigned long flags;
-	int status = urb->status;
-
-	if (urb->number_of_packets > 0) {
-		dev_err(&port->dev, "%s transfer_buffer_length %d "
-			"actual_length %d number of packets %d\n", __func__,
-			urb->transfer_buffer_length,
-			urb->actual_length, urb->number_of_packets);
-		dev_err(&port->dev, "%s transfer_flags %x\n", __func__,
-			urb->transfer_flags);
-	}
+	int i;
+	char status;
+	char flag;
+	char *ch;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (port->port.count <= 0)
-		return;
-
-	tty = tty_port_tty_get(&port->port);
-	if (!tty) {
-		dbg("%s - bad tty pointer - exiting", __func__);
-		return;
+	if (len < 2) {
+		dbg("malformed packet");
+		return 0;
 	}
 
-	priv = usb_get_serial_port_data(port);
-	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __func__);
-		goto out;
+	/* Compare new line status to the old one, signal if different/
+	   N.B. packet may be processed more than once, but differences
+	   are only processed once.  */
+	status = packet[0] & FTDI_STATUS_B0_MASK;
+	if (status != priv->prev_status) {
+		priv->diff_status |= status ^ priv->prev_status;
+		wake_up_interruptible(&priv->delta_msr_wait);
+		priv->prev_status = status;
 	}
 
-	if (urb != port->read_urb)
-		dev_err(&port->dev, "%s - Not my urb!\n", __func__);
-
-	if (status) {
-		/* This will happen at close every time so it is a dbg not an
-		   err */
-		dbg("(this is ok on close) nonzero read bulk status received: %d", status);
-		goto out;
+	/*
+	 * Although the device uses a bitmask and hence can have multiple
+	 * errors on a packet - the order here sets the priority the error is
+	 * returned to the tty layer.
+	 */
+	flag = TTY_NORMAL;
+	if (packet[1] & FTDI_RS_OE) {
+		flag = TTY_OVERRUN;
+		dbg("OVERRRUN error");
+	}
+	if (packet[1] & FTDI_RS_BI) {
+		flag = TTY_BREAK;
+		dbg("BREAK received");
+		usb_serial_handle_break(port);
+	}
+	if (packet[1] & FTDI_RS_PE) {
+		flag = TTY_PARITY;
+		dbg("PARITY error");
+	}
+	if (packet[1] & FTDI_RS_FE) {
+		flag = TTY_FRAME;
+		dbg("FRAMING error");
 	}
 
-	/* count data bytes, but not status bytes */
-	countread = urb->actual_length;
-	countread -= 2 * DIV_ROUND_UP(countread, priv->max_packet_size);
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_bytes += countread;
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
-
-	ftdi_process_read(&priv->rx_work.work);
-out:
-	tty_kref_put(tty);
-} /* ftdi_read_bulk_callback */
-
+	len -= 2;
+	if (!len)
+		return 0;	/* status only */
+	ch = packet + 2;
+
+	if (!(port->console && port->sysrq) && flag == TTY_NORMAL)
+		tty_insert_flip_string(tty, ch, len);
+	else {
+		for (i = 0; i < len; i++, ch++) {
+			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+				tty_insert_flip_char(tty, *ch, flag);
+		}
+	}
+	return len;
+}
 
-static void ftdi_process_read(struct work_struct *work)
-{ /* ftdi_process_read */
-	struct ftdi_private *priv =
-		container_of(work, struct ftdi_private, rx_work.work);
-	struct usb_serial_port *port = priv->port;
-	struct urb *urb;
+static void ftdi_process_read(struct usb_serial_port *port)
+{
+	struct urb *urb = port->read_urb;
 	struct tty_struct *tty;
-	char error_flag;
-	unsigned char *data;
-
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	char *data = (char *)urb->transfer_buffer;
 	int i;
-	int result;
-	int need_flip;
-	int packet_offset;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (port->port.count <= 0)
-		return;
+	int len;
+	int count = 0;
 
 	tty = tty_port_tty_get(&port->port);
-	if (!tty) {
-		dbg("%s - bad tty pointer - exiting", __func__);
+	if (!tty)
 		return;
-	}
-
-	priv = usb_get_serial_port_data(port);
-	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __func__);
-		goto out;
-	}
-
-	urb = port->read_urb;
-	if (!urb) {
-		dbg("%s - bad read_urb pointer - exiting", __func__);
-		goto out;
-	}
-
-	data = urb->transfer_buffer;
 
-	if (priv->rx_processed) {
-		dbg("%s - already processed: %d bytes, %d remain", __func__,
-				priv->rx_processed,
-				urb->actual_length - priv->rx_processed);
-	} else {
-		/* The first two bytes of every read packet are status */
-		if (urb->actual_length > 2)
-			usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-		else
-			dbg("Status only: %03oo %03oo", data[0], data[1]);
+	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
+		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
+		count += ftdi_process_packet(tty, port, priv, &data[i], len);
 	}
 
-
-	/* TO DO -- check for hung up line and handle appropriately: */
-	/*   send hangup  */
-	/* See acm.c - you do a tty_hangup  - eg tty_hangup(tty) */
-	/* if CD is dropped and the line is not CLOCAL then we should hangup */
-
-	need_flip = 0;
-	for (packet_offset = priv->rx_processed;
-		packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) {
-		int length;
-
-		/* Compare new line status to the old one, signal if different/
-		   N.B. packet may be processed more than once, but differences
-		   are only processed once.  */
-		char new_status = data[packet_offset + 0] &
-						FTDI_STATUS_B0_MASK;
-		if (new_status != priv->prev_status) {
-			priv->diff_status |=
-				new_status ^ priv->prev_status;
-			wake_up_interruptible(&priv->delta_msr_wait);
-			priv->prev_status = new_status;
-		}
-
-		length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2;
-		if (length < 0) {
-			dev_err(&port->dev, "%s - bad packet length: %d\n",
-				__func__, length+2);
-			length = 0;
-		}
-
-		if (priv->rx_flags & THROTTLED) {
-			dbg("%s - throttled", __func__);
-			break;
-		}
-		if (tty_buffer_request_room(tty, length) < length) {
-			/* break out & wait for throttling/unthrottling to
-			   happen */
-			dbg("%s - receive room low", __func__);
-			break;
-		}
-
-		/* Handle errors and break */
-		error_flag = TTY_NORMAL;
-		/* Although the device uses a bitmask and hence can have
-		   multiple errors on a packet - the order here sets the
-		   priority the error is returned to the tty layer  */
-
-		if (data[packet_offset+1] & FTDI_RS_OE) {
-			error_flag = TTY_OVERRUN;
-			dbg("OVERRRUN error");
-		}
-		if (data[packet_offset+1] & FTDI_RS_BI) {
-			error_flag = TTY_BREAK;
-			dbg("BREAK received");
-			usb_serial_handle_break(port);
-		}
-		if (data[packet_offset+1] & FTDI_RS_PE) {
-			error_flag = TTY_PARITY;
-			dbg("PARITY error");
-		}
-		if (data[packet_offset+1] & FTDI_RS_FE) {
-			error_flag = TTY_FRAME;
-			dbg("FRAMING error");
-		}
-		if (length > 0) {
-			for (i = 2; i < length+2; i++) {
-				/* Note that the error flag is duplicated for
-				   every character received since we don't know
-				   which character it applied to */
-				if (!usb_serial_handle_sysrq_char(tty, port,
-						data[packet_offset + i]))
-					tty_insert_flip_char(tty,
-						data[packet_offset + i],
-						error_flag);
-			}
-			need_flip = 1;
-		}
-
-#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
-		/* if a parity error is detected you get status packets forever
-		   until a character is sent without a parity error.
-		   This doesn't work well since the application receives a
-		   never ending stream of bad data - even though new data
-		   hasn't been sent. Therefore I (bill) have taken this out.
-		   However - this might make sense for framing errors and so on
-		   so I am leaving the code in for now.
-		*/
-		else {
-			if (error_flag != TTY_NORMAL) {
-				dbg("error_flag is not normal");
-				/* In this case it is just status - if that is
-				   an error send a bad character */
-				if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-					tty_flip_buffer_push(tty);
-				tty_insert_flip_char(tty, 0xff, error_flag);
-				need_flip = 1;
-			}
-		}
-#endif
-	} /* "for(packet_offset=0..." */
-
-	/* Low latency */
-	if (need_flip)
+	if (count)
 		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
 
-	if (packet_offset < urb->actual_length) {
-		/* not completely processed - record progress */
-		priv->rx_processed = packet_offset;
-		dbg("%s - incomplete, %d bytes processed, %d remain",
-				__func__, packet_offset,
-				urb->actual_length - packet_offset);
-		/* check if we were throttled while processing */
-		spin_lock_irqsave(&priv->rx_lock, flags);
-		if (priv->rx_flags & THROTTLED) {
-			priv->rx_flags |= ACTUALLY_THROTTLED;
-			spin_unlock_irqrestore(&priv->rx_lock, flags);
-			dbg("%s - deferring remainder until unthrottled",
-					__func__);
-			goto out;
-		}
-		spin_unlock_irqrestore(&priv->rx_lock, flags);
-		/* if the port is closed stop trying to read */
-		if (port->port.count > 0)
-			/* delay processing of remainder */
-			schedule_delayed_work(&priv->rx_work, 1);
-		else
-			dbg("%s - port is closed", __func__);
-		goto out;
-	}
-
-	/* urb is completely processed */
-	priv->rx_processed = 0;
+static void ftdi_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned long flags;
 
-	/* if the port is closed stop trying to read */
-	if (port->port.count > 0) {
-		/* Continue trying to always read  */
-		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			usb_rcvbulkpipe(port->serial->dev,
-					port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-			port->read_urb->transfer_buffer_length,
-			ftdi_read_bulk_callback, port);
+	dbg("%s - port %d", __func__, port->number);
 
-		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed resubmitting read urb, error %d\n",
-				__func__, result);
+	if (urb->status) {
+		dbg("%s - nonzero read bulk status received: %d",
+						__func__, urb->status);
+		return;
 	}
-out:
-	tty_kref_put(tty);
-} /* ftdi_process_read */
 
+	usb_serial_debug_data(debug, &port->dev, __func__,
+				urb->actual_length, urb->transfer_buffer);
+	ftdi_process_read(port);
+
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttled = port->throttle_req;
+	if (!port->throttled) {
+		spin_unlock_irqrestore(&port->lock, flags);
+		ftdi_submit_read_urb(port, GFP_ATOMIC);
+	} else
+		spin_unlock_irqrestore(&port->lock, flags);
+}
 
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
@@ -2609,33 +2447,31 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 static void ftdi_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_flags |= THROTTLED;
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttle_req = 1;
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-
-static void ftdi_unthrottle(struct tty_struct *tty)
+void ftdi_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	int actually_throttled;
+	int was_throttled;
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	was_throttled = port->throttled;
+	port->throttled = port->throttle_req = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
 
-	if (actually_throttled)
-		schedule_delayed_work(&priv->rx_work, 0);
+	/* Resubmit urb if throttled and open. */
+	if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		ftdi_submit_read_urb(port, GFP_KERNEL);
 }
 
 static int __init ftdi_init(void)
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 20432d345529..5ac900e5a50e 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1390,14 +1390,13 @@ static void garmin_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 	/* set flag, data received will be put into a queue
 	   for later processing */
-	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	spin_lock_irq(&garmin_data_p->lock);
 	garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED;
-	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+	spin_unlock_irq(&garmin_data_p->lock);
 }
 
 
@@ -1405,13 +1404,12 @@ static void garmin_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
-	unsigned long flags;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	spin_lock_irq(&garmin_data_p->lock);
 	garmin_data_p->flags &= ~FLAGS_THROTTLED;
-	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+	spin_unlock_irq(&garmin_data_p->lock);
 
 	/* in native mode send queued data to tty, in
 	   serial mode nothing needs to be done here */
@@ -1419,7 +1417,7 @@ static void garmin_unthrottle(struct tty_struct *tty)
 		garmin_flush_queue(garmin_data_p);
 
 	if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
-		status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (status)
 			dev_err(&port->dev,
 				"%s - failed resubmitting read urb, error %d\n",
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index deba08c7a015..bbe005cefcfb 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -546,7 +546,7 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
 
 	if (was_throttled) {
 		/* Resume reading from device */
-		usb_serial_generic_resubmit_read_urb(port, GFP_KERNEL);
+		flush_and_resubmit_read_urb(port);
 	}
 }
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 24fcc64b837d..d6231c38813e 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -966,6 +966,15 @@ static int ipaq_calc_num_ports(struct usb_serial *serial)
 static int ipaq_startup(struct usb_serial *serial)
 {
 	dbg("%s", __func__);
+
+	/* Some of the devices in ipaq_id_table[] are composite, and we
+	 * shouldn't bind to all the interfaces.  This test will rule out
+	 * some obviously invalid possibilities.
+	 */
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports)
+		return -ENODEV;
+
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
 		/*
 		 * FIXME: HP iPaq rx3715, possibly others, have 1 config that
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 257c16cc6b2a..1296a097f5c3 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -290,7 +290,7 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
 	/* just restart the receive interrupt URB */
 	dbg("keyspan_pda_rx_unthrottle port %d", port->number);
 	port->interrupt_in_urb->dev = port->serial->dev;
-	if (usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC))
+	if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
 		dbg(" usb_submit_urb(read urb) failed");
 	return;
 }
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index f7373371b137..3a7873806f46 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -951,7 +951,7 @@ static void klsi_105_unthrottle(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev,
 			"%s - failed submitting read urb, error %d\n",
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index ad4998bbf16f..cd009cb280a5 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -777,20 +777,19 @@ static void mct_u232_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 	unsigned int control_state;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->rx_flags |= THROTTLED;
 	if (C_CRTSCTS(tty)) {
 		priv->control_state &= ~TIOCM_RTS;
 		control_state = priv->control_state;
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irq(&priv->lock);
 		(void) mct_u232_set_modem_ctrl(port->serial, control_state);
 	} else {
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irq(&priv->lock);
 	}
 }
 
@@ -799,20 +798,19 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 	unsigned int control_state;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
 		priv->rx_flags &= ~THROTTLED;
 		priv->control_state |= TIOCM_RTS;
 		control_state = priv->control_state;
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irq(&priv->lock);
 		(void) mct_u232_set_modem_ctrl(port->serial, control_state);
 	} else {
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irq(&priv->lock);
 	}
 }
 
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 1085a577c5c1..80f59b6350cb 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -314,21 +314,24 @@ static void opticon_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
-	int result;
+	int result, was_throttled;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->throttled = false;
+	was_throttled = priv->actually_throttled;
 	priv->actually_throttled = false;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	priv->bulk_read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
+	if (was_throttled) {
+		result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
+		if (result)
+			dev_err(&port->dev,
+				"%s - failed submitting read urb, error %d\n",
 							__func__, result);
+	}
 }
 
 static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f66e39883218..65d96b214f95 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -165,6 +165,7 @@ static int  option_resume(struct usb_serial *serial);
 #define HUAWEI_PRODUCT_E143D			0x143D
 #define HUAWEI_PRODUCT_E143E			0x143E
 #define HUAWEI_PRODUCT_E143F			0x143F
+#define HUAWEI_PRODUCT_E14AC			0x14AC
 
 #define QUANTA_VENDOR_ID			0x0408
 #define QUANTA_PRODUCT_Q101			0xEA02
@@ -318,6 +319,7 @@ static int  option_resume(struct usb_serial *serial);
 /* TOSHIBA PRODUCTS */
 #define TOSHIBA_VENDOR_ID			0x0930
 #define TOSHIBA_PRODUCT_HSDPA_MINICARD		0x1302
+#define TOSHIBA_PRODUCT_G450			0x0d45
 
 #define ALINK_VENDOR_ID				0x1e0e
 #define ALINK_PRODUCT_3GU			0x9200
@@ -326,6 +328,9 @@ static int  option_resume(struct usb_serial *serial);
 #define ALCATEL_VENDOR_ID			0x1bbb
 #define ALCATEL_PRODUCT_X060S			0x0000
 
+/* Airplus products */
+#define AIRPLUS_VENDOR_ID			0x1011
+#define AIRPLUS_PRODUCT_MCD650			0x3198
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -424,6 +429,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
@@ -581,10 +587,12 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
+	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
 	{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
+	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 0f4a70ce3823..c644e26394b4 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -288,7 +288,7 @@ static void setup_line(struct work_struct *work)
 
 	dbg("%s(): submitting interrupt urb", __func__);
 	port->interrupt_in_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 				" with error %d\n", __func__, result);
@@ -335,7 +335,7 @@ void send_data(struct work_struct *work)
 
 		dbg("%s(): submitting interrupt urb", __func__);
 		port->interrupt_in_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 		if (result != 0) {
 			dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 				" with error %d\n", __func__, result);
@@ -349,7 +349,7 @@ void send_data(struct work_struct *work)
 
 	port->write_urb->transfer_buffer_length = count;
 	port->write_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->write_urb, GFP_NOIO);
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1128e01525b1..9ec1a49e2362 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -1046,13 +1046,15 @@ static void pl2303_push_data(struct tty_struct *tty,
 	/* overrun is special, not associated with a char */
 	if (line_status & UART_OVERRUN_ERROR)
 		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-	if (port->console && port->sysrq) {
+
+	if (tty_flag == TTY_NORMAL && !(port->console && port->sysrq))
+		tty_insert_flip_string(tty, data, urb->actual_length);
+	else {
 		int i;
 		for (i = 0; i < urb->actual_length; ++i)
 			if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
 				tty_insert_flip_char(tty, data[i], tty_flag);
-	} else
-		tty_insert_flip_string(tty, data, urb->actual_length);
+	}
 	tty_flip_buffer_push(tty);
 }
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 8c075b2416bb..45883988a005 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -17,7 +17,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.3.7"
+#define DRIVER_VERSION "v.1.3.8"
 #define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index cb7e95f9fcbf..b282c0f2d8e5 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -165,34 +165,36 @@ static void symbol_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->throttled = true;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 }
 
 static void symbol_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
-	unsigned long flags;
 	int result;
+	bool was_throttled;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->throttled = false;
+	was_throttled = priv->actually_throttled;
 	priv->actually_throttled = false;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 
 	priv->int_urb->dev = port->serial->dev;
-	result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
+	if (was_throttled) {
+		result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
+		if (result)
+			dev_err(&port->dev,
+				"%s - failed submitting read urb, error %d\n",
 							__func__, result);
+	}
 }
 
 static int symbol_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index aa6b2ae951ae..bd3fa7ff15b1 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -156,7 +156,8 @@ static void destroy_serial(struct kref *kref)
 	if (serial->minor != SERIAL_TTY_NO_MINOR)
 		return_serial(serial);
 
-	serial->type->release(serial);
+	if (serial->attached)
+		serial->type->release(serial);
 
 	/* Now that nothing is using the ports, they can be freed */
 	for (i = 0; i < serial->num_port_pointers; ++i) {
@@ -1059,12 +1060,15 @@ int usb_serial_probe(struct usb_interface *interface,
 		module_put(type->driver.owner);
 		if (retval < 0)
 			goto probe_error;
+		serial->attached = 1;
 		if (retval > 0) {
 			/* quietly accept this device, but don't bind to a
 			   serial port as it's about to disappear */
 			serial->num_ports = 0;
 			goto exit;
 		}
+	} else {
+		serial->attached = 1;
 	}
 
 	if (get_free_serial(serial, num_ports, &minor) == NULL) {
@@ -1164,8 +1168,10 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
 
 	if (serial->type->suspend) {
 		r = serial->type->suspend(serial, message);
-		if (r < 0)
+		if (r < 0) {
+			serial->suspending = 0;
 			goto err_out;
+		}
 	}
 
 	for (i = 0; i < serial->num_ports; ++i) {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 1aa5d20a5d99..ad1f9232292d 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -513,7 +513,8 @@ static void visor_read_bulk_callback(struct urb *urb)
 			tty_kref_put(tty);
 		}
 		spin_lock(&priv->lock);
-		priv->bytes_in += available_room;
+		if (tty)
+			priv->bytes_in += available_room;
 
 	} else {
 		spin_lock(&priv->lock);
@@ -582,12 +583,11 @@ static void visor_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->throttled = 1;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 }
 
 
@@ -595,21 +595,23 @@ static void visor_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	int result;
+	int result, was_throttled;
 
 	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->throttled = 0;
+	was_throttled = priv->actually_throttled;
 	priv->actually_throttled = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 
-	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
+	if (was_throttled) {
+		port->read_urb->dev = port->serial->dev;
+		result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+		if (result)
+			dev_err(&port->dev,
+				"%s - failed submitting read urb, error %d\n",
 							__func__, result);
+	}
 }
 
 static int palm_os_3_probe(struct usb_serial *serial,
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 62424eec33ec..1093d2eb046a 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -949,13 +949,12 @@ static void whiteheat_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&info->lock, flags);
+	spin_lock_irq(&info->lock);
 	info->flags |= THROTTLED;
-	spin_unlock_irqrestore(&info->lock, flags);
+	spin_unlock_irq(&info->lock);
 
 	return;
 }
@@ -966,14 +965,13 @@ static void whiteheat_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	int actually_throttled;
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&info->lock, flags);
+	spin_lock_irq(&info->lock);
 	actually_throttled = info->flags & ACTUALLY_THROTTLED;
 	info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&info->lock, flags);
+	spin_unlock_irq(&info->lock);
 
 	if (actually_throttled)
 		rx_data_softint(&info->rx_work);
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index e20dc525d177..589f6b4404f0 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -696,7 +696,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		/* device supports and needs bigger sense buffer */
 		if (us->fflags & US_FL_SANE_SENSE)
 			sense_size = ~0;
-
+Retry_Sense:
 		US_DEBUGP("Issuing auto-REQUEST_SENSE\n");
 
 		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
@@ -720,6 +720,21 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 			srb->result = DID_ABORT << 16;
 			goto Handle_Errors;
 		}
+
+		/* Some devices claim to support larger sense but fail when
+		 * trying to request it. When a transport failure happens
+		 * using US_FS_SANE_SENSE, we always retry with a standard
+		 * (small) sense request. This fixes some USB GSM modems
+		 */
+		if (temp_result == USB_STOR_TRANSPORT_FAILED &&
+		    (us->fflags & US_FL_SANE_SENSE) &&
+		    sense_size != US_SENSE_SIZE) {
+			US_DEBUGP("-- auto-sense failure, retry small sense\n");
+			sense_size = US_SENSE_SIZE;
+			goto Retry_Sense;
+		}
+
+		/* Other failures */
 		if (temp_result != USB_STOR_TRANSPORT_GOOD) {
 			US_DEBUGP("-- auto-sense failure\n");
 
@@ -768,17 +783,32 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		/* set the result so the higher layers expect this data */
 		srb->result = SAM_STAT_CHECK_CONDITION;
 
-		/* If things are really okay, then let's show that.  Zero
-		 * out the sense buffer so the higher layers won't realize
-		 * we did an unsolicited auto-sense. */
-		if (result == USB_STOR_TRANSPORT_GOOD &&
-			/* Filemark 0, ignore EOM, ILI 0, no sense */
+		/* We often get empty sense data.  This could indicate that
+		 * everything worked or that there was an unspecified
+		 * problem.  We have to decide which.
+		 */
+		if (	/* Filemark 0, ignore EOM, ILI 0, no sense */
 				(srb->sense_buffer[2] & 0xaf) == 0 &&
 			/* No ASC or ASCQ */
 				srb->sense_buffer[12] == 0 &&
 				srb->sense_buffer[13] == 0) {
-			srb->result = SAM_STAT_GOOD;
-			srb->sense_buffer[0] = 0x0;
+
+			/* If things are really okay, then let's show that.
+			 * Zero out the sense buffer so the higher layers
+			 * won't realize we did an unsolicited auto-sense.
+			 */
+			if (result == USB_STOR_TRANSPORT_GOOD) {
+				srb->result = SAM_STAT_GOOD;
+				srb->sense_buffer[0] = 0x0;
+
+			/* If there was a problem, report an unspecified
+			 * hardware error to prevent the higher layers from
+			 * entering an infinite retry loop.
+			 */
+			} else {
+				srb->result = DID_ERROR << 16;
+				srb->sense_buffer[2] = HARDWARE_ERROR;
+			}
 		}
 	}
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 079ae0f7bec1..d4f034ebaa8a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1823,6 +1823,13 @@ UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Sergey Pinaev <dfo@antex.ru> */
+UNUSUAL_DEV(  0x4102, 0x1059, 0x0000,  0x0000,
+               "iRiver",
+               "P7K",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_MAX_SECTORS_64 ),
+
 /*
  * David Härdeman <david@2gen.com>
  * The key makes the SCSI stack print confusing (but harmless) messages
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
index b2f149fedcc5..4516c36436e6 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/usb/wusbcore/security.c
@@ -200,35 +200,40 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc,
 {
 	int result, bytes, secd_size;
 	struct device *dev = &usb_dev->dev;
-	struct usb_security_descriptor secd;
+	struct usb_security_descriptor *secd;
 	const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL;
-	void *secd_buf;
 	const void *itr, *top;
 	char buf[64];
 
+	secd = kmalloc(sizeof(struct usb_security_descriptor), GFP_KERNEL);
+	if (secd == NULL) {
+		result = -ENOMEM;
+		goto out;
+	}
+
 	result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
-				    0, &secd, sizeof(secd));
+				    0, secd, sizeof(struct usb_security_descriptor));
 	if (result < sizeof(secd)) {
 		dev_err(dev, "Can't read security descriptor or "
 			"not enough data: %d\n", result);
-		goto error_secd;
+		goto out;
 	}
-	secd_size = le16_to_cpu(secd.wTotalLength);
-	secd_buf = kmalloc(secd_size, GFP_KERNEL);
-	if (secd_buf == NULL) {
+	secd_size = le16_to_cpu(secd->wTotalLength);
+	secd = krealloc(secd, secd_size, GFP_KERNEL);
+	if (secd == NULL) {
 		dev_err(dev, "Can't allocate space for security descriptors\n");
-		goto error_secd_alloc;
+		goto out;
 	}
 	result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
-				    0, secd_buf, secd_size);
+				    0, secd, secd_size);
 	if (result < secd_size) {
 		dev_err(dev, "Can't read security descriptor or "
 			"not enough data: %d\n", result);
-		goto error_secd_all;
+		goto out;
 	}
 	bytes = 0;
-	itr = secd_buf + sizeof(secd);
-	top = secd_buf + result;
+	itr = &secd[1];
+	top = (void *)secd + result;
 	while (itr < top) {
 		etd = itr;
 		if (top - itr < sizeof(*etd)) {
@@ -259,24 +264,16 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc,
 		dev_err(dev, "WUSB device doesn't support CCM1 encryption, "
 			"can't use!\n");
 		result = -EINVAL;
-		goto error_no_ccm1;
+		goto out;
 	}
 	wusb_dev->ccm1_etd = *ccm1_etd;
 	dev_dbg(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n",
 		buf, wusb_et_name(ccm1_etd->bEncryptionType),
 		ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex);
 	result = 0;
-	kfree(secd_buf);
 out:
+	kfree(secd);
 	return result;
-
-
-error_no_ccm1:
-error_secd_all:
-	kfree(secd_buf);
-error_secd_alloc:
-error_secd:
-	goto out;
 }
 
 void wusb_dev_sec_rm(struct wusb_dev *wusb_dev)
diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c
index 4a42993700c1..2eecec0c13c9 100644
--- a/drivers/uwb/uwb-debug.c
+++ b/drivers/uwb/uwb-debug.c
@@ -205,7 +205,7 @@ static ssize_t command_write(struct file *file, const char __user *buf,
 	return ret < 0 ? ret : len;
 }
 
-static struct file_operations command_fops = {
+static const struct file_operations command_fops = {
 	.open   = command_open,
 	.write  = command_write,
 	.read   = NULL,
@@ -255,7 +255,7 @@ static int reservations_open(struct inode *inode, struct file *file)
 	return single_open(file, reservations_print, inode->i_private);
 }
 
-static struct file_operations reservations_fops = {
+static const struct file_operations reservations_fops = {
 	.open    = reservations_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
@@ -283,7 +283,7 @@ static int drp_avail_open(struct inode *inode, struct file *file)
 	return single_open(file, drp_avail_print, inode->i_private);
 }
 
-static struct file_operations drp_avail_fops = {
+static const struct file_operations drp_avail_fops = {
 	.open    = drp_avail_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c
index 1d9a6f54658e..01950c62dc8d 100644
--- a/drivers/uwb/whc-rc.c
+++ b/drivers/uwb/whc-rc.c
@@ -42,6 +42,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 42e1005e2916..d065894ce38f 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -26,7 +26,6 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
-#include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <video/da8xx-fb.h>
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index a1f2e7ce730b..99bbd282ce63 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1800,7 +1800,7 @@ static int __init video_setup(char *options)
  		global = 1;
  	}
 
- 	if (!global && !strstr(options, "fb:")) {
+ 	if (!global && !strchr(options, ':')) {
  		fb_mode_option = options;
  		global = 1;
  	}
diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c
index f2de5a1acd6d..5c5a1ad1d397 100644
--- a/drivers/video/msm/mddi.c
+++ b/drivers/video/msm/mddi.c
@@ -27,8 +27,6 @@
 #include <mach/msm_iomap.h>
 #include <mach/irqs.h>
 #include <mach/board.h>
-#include <linux/delay.h>
-
 #include <mach/msm_fb.h>
 #include "mddi_hw.h"
 
diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
index d5e59556f9e2..70dadf9d2334 100644
--- a/drivers/video/omap/blizzard.c
+++ b/drivers/video/omap/blizzard.c
@@ -93,7 +93,7 @@ struct blizzard_reg_list {
 };
 
 /* These need to be saved / restored separately from the rest. */
-static struct blizzard_reg_list blizzard_pll_regs[] = {
+static const struct blizzard_reg_list blizzard_pll_regs[] = {
 	{
 		.start	= 0x04,		/* Don't save PLL ctrl (0x0C) */
 		.end	= 0x0a,
@@ -104,7 +104,7 @@ static struct blizzard_reg_list blizzard_pll_regs[] = {
 	},
 };
 
-static struct blizzard_reg_list blizzard_gen_regs[] = {
+static const struct blizzard_reg_list blizzard_gen_regs[] = {
 	{
 		.start	= 0x18,		/* SDRAM control */
 		.end	= 0x20,
@@ -191,7 +191,7 @@ struct blizzard_struct {
 
 	struct omapfb_device	*fbdev;
 	struct lcd_ctrl_extif	*extif;
-	struct lcd_ctrl		*int_ctrl;
+	const struct lcd_ctrl	*int_ctrl;
 
 	void			(*power_up)(struct device *dev);
 	void			(*power_down)(struct device *dev);
@@ -1372,7 +1372,7 @@ static void blizzard_get_caps(int plane, struct omapfb_caps *caps)
 			   (1 << OMAPFB_COLOR_YUV420);
 }
 
-static void _save_regs(struct blizzard_reg_list *list, int cnt)
+static void _save_regs(const struct blizzard_reg_list *list, int cnt)
 {
 	int i;
 
@@ -1383,7 +1383,7 @@ static void _save_regs(struct blizzard_reg_list *list, int cnt)
 	}
 }
 
-static void _restore_regs(struct blizzard_reg_list *list, int cnt)
+static void _restore_regs(const struct blizzard_reg_list *list, int cnt)
 {
 	int i;
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 125e605b8c68..0d0c8c8b9b56 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -393,7 +393,7 @@ static void omapfb_sync(struct fb_info *fbi)
  * Set fb_info.fix fields and also updates fbdev.
  * When calling this fb_info.var must be set up already.
  */
-static void set_fb_fix(struct fb_info *fbi)
+static void set_fb_fix(struct fb_info *fbi, int from_init)
 {
 	struct fb_fix_screeninfo *fix = &fbi->fix;
 	struct fb_var_screeninfo *var = &fbi->var;
@@ -403,10 +403,16 @@ static void set_fb_fix(struct fb_info *fbi)
 
 	rg = &plane->fbdev->mem_desc.region[plane->idx];
 	fbi->screen_base	= rg->vaddr;
-	mutex_lock(&fbi->mm_lock);
-	fix->smem_start		= rg->paddr;
-	fix->smem_len		= rg->size;
-	mutex_unlock(&fbi->mm_lock);
+
+	if (!from_init) {
+		mutex_lock(&fbi->mm_lock);
+		fix->smem_start		= rg->paddr;
+		fix->smem_len		= rg->size;
+		mutex_unlock(&fbi->mm_lock);
+	} else {
+		fix->smem_start		= rg->paddr;
+		fix->smem_len		= rg->size;
+	}
 
 	fix->type = FB_TYPE_PACKED_PIXELS;
 	bpp = var->bits_per_pixel;
@@ -704,7 +710,7 @@ static int omapfb_set_par(struct fb_info *fbi)
 	int r = 0;
 
 	omapfb_rqueue_lock(fbdev);
-	set_fb_fix(fbi);
+	set_fb_fix(fbi, 0);
 	r = ctrl_change_mode(fbi);
 	omapfb_rqueue_unlock(fbdev);
 
@@ -904,7 +910,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 		if (old_size != size) {
 			if (size) {
 				memcpy(&fbi->var, new_var, sizeof(fbi->var));
-				set_fb_fix(fbi);
+				set_fb_fix(fbi, 0);
 			} else {
 				/*
 				 * Set these explicitly to indicate that the
@@ -1504,7 +1510,7 @@ static int fbinfo_init(struct omapfb_device *fbdev, struct fb_info *info)
 	var->bits_per_pixel = fbdev->panel->bpp;
 
 	set_fb_var(info, var);
-	set_fb_fix(info);
+	set_fb_fix(info, 1);
 
 	r = fb_alloc_cmap(&info->cmap, 16, 0);
 	if (r != 0)
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index e98baf6916b8..e35232a18571 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -67,11 +67,14 @@ static DEFINE_MUTEX(uvfb_lock);
  * find the kernel part of the task struct, copy the registers and
  * the buffer contents and then complete the task.
  */
-static void uvesafb_cn_callback(struct cn_msg *msg)
+static void uvesafb_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
 	struct uvesafb_task *utask;
 	struct uvesafb_ktask *task;
 
+	if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN))
+		return;
+
 	if (msg->seq >= UVESAFB_TASKS_MAX)
 		return;
 
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 200c22f55130..9dd588042880 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -19,7 +19,6 @@
  */
 //#define DEBUG
 #include <linux/virtio.h>
-#include <linux/virtio_ids.h>
 #include <linux/virtio_balloon.h>
 #include <linux/swap.h>
 #include <linux/kthread.h>
@@ -248,7 +247,7 @@ out:
 	return err;
 }
 
-static void virtballoon_remove(struct virtio_device *vdev)
+static void __devexit virtballoon_remove(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb = vdev->priv;
 
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 4a1f1ebff7bf..28d9cf7cf72f 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -530,19 +530,22 @@ static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 			err = PTR_ERR(vqs[i]);
 			goto error_find;
 		}
+
+		if (!vp_dev->per_vq_vectors || msix_vec == VIRTIO_MSI_NO_VECTOR)
+			continue;
+
 		/* allocate per-vq irq if available and necessary */
-		if (vp_dev->per_vq_vectors) {
-			snprintf(vp_dev->msix_names[msix_vec],
-				 sizeof *vp_dev->msix_names,
-				 "%s-%s",
-				 dev_name(&vp_dev->vdev.dev), names[i]);
-			err = request_irq(msix_vec, vring_interrupt, 0,
-					  vp_dev->msix_names[msix_vec],
-					  vqs[i]);
-			if (err) {
-				vp_del_vq(vqs[i]);
-				goto error_find;
-			}
+		snprintf(vp_dev->msix_names[msix_vec],
+			 sizeof *vp_dev->msix_names,
+			 "%s-%s",
+			 dev_name(&vp_dev->vdev.dev), names[i]);
+		err = request_irq(vp_dev->msix_entries[msix_vec].vector,
+				  vring_interrupt, 0,
+				  vp_dev->msix_names[msix_vec],
+				  vqs[i]);
+		if (err) {
+			vp_del_vq(vqs[i]);
+			goto error_find;
 		}
 	}
 	return 0;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index f53600580726..fbd2ecde93e4 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -285,6 +285,9 @@ static void *vring_get_buf(struct virtqueue *_vq, unsigned int *len)
 		return NULL;
 	}
 
+	/* Only get used array entries after they have been exposed by host. */
+	rmb();
+
 	i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id;
 	*len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len;
 
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index df52cb355f7d..406caa6a71cb 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -24,19 +24,6 @@
 #include "../w1_int.h"
 
 /**
- * Address is selected using 2 pins, resulting in 4 possible addresses.
- *  0x18, 0x19, 0x1a, 0x1b
- * However, the chip cannot be detected without doing an i2c write,
- * so use the force module parameter.
- */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/**
- * Insmod parameters
- */
-I2C_CLIENT_INSMOD_1(ds2482);
-
-/**
  * The DS2482 registers - there are 3 registers that are addressed by a read
  * pointer. The read pointer is set by the last command executed.
  *
@@ -96,8 +83,6 @@ static const u8 ds2482_chan_rd[8] =
 
 static int ds2482_probe(struct i2c_client *client,
 			const struct i2c_device_id *id);
-static int ds2482_detect(struct i2c_client *client, int kind,
-			 struct i2c_board_info *info);
 static int ds2482_remove(struct i2c_client *client);
 
 
@@ -117,8 +102,6 @@ static struct i2c_driver ds2482_driver = {
 	.probe		= ds2482_probe,
 	.remove		= ds2482_remove,
 	.id_table	= ds2482_id,
-	.detect		= ds2482_detect,
-	.address_data	= &addr_data,
 };
 
 /*
@@ -425,19 +408,6 @@ static u8 ds2482_w1_reset_bus(void *data)
 }
 
 
-static int ds2482_detect(struct i2c_client *client, int kind,
-			 struct i2c_board_info *info)
-{
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
-				     I2C_FUNC_SMBUS_BYTE))
-		return -ENODEV;
-
-	strlcpy(info->type, "ds2482", I2C_NAME_SIZE);
-
-	return 0;
-}
-
 static int ds2482_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -446,6 +416,11 @@ static int ds2482_probe(struct i2c_client *client,
 	int temp1;
 	int idx;
 
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+				     I2C_FUNC_SMBUS_BYTE))
+		return -ENODEV;
+
 	if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 52ccb3d3a963..45c126fea31d 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -306,7 +306,7 @@ static int w1_netlink_send_error(struct cn_msg *rcmsg, struct w1_netlink_msg *rm
 	return error;
 }
 
-static void w1_cn_callback(struct cn_msg *msg)
+static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
 	struct w1_netlink_msg *m = (struct w1_netlink_msg *)(msg + 1);
 	struct w1_netlink_cmd *cmd;
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index 1e8f02f440e6..d3c824dc2358 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -206,7 +206,7 @@ static int __devinit riowd_probe(struct of_device *op,
 
 	dev_set_drvdata(&op->dev, p);
 	riowd_device = p;
-	err = 0;
+	return 0;
 
 out_iounmap:
 	of_iounmap(&op->resource[0], p->regs, 2);
diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c
index a9592d981b10..6c4269b836b7 100644
--- a/drivers/xen/xenfs/xenbus.c
+++ b/drivers/xen/xenfs/xenbus.c
@@ -43,6 +43,7 @@
 #include <linux/fs.h>
 #include <linux/poll.h>
 #include <linux/mutex.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/mount.h>
 #include <linux/pagemap.h>
diff --git a/firmware/Makefile b/firmware/Makefile
index 5ea80b19785b..a6c7c3e47e42 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -67,10 +67,13 @@ fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
 fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
 			     e100/d102e_ucode.bin
 fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
-fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis
+fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
+				     cis/DP83903.cis cis/NE2K.cis \
+				     cis/tamarack.cis
 fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
 fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
-fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis
+fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
+				       cis/COMpad2.cis cis/COMpad4.cis
 fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
 fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
 				      advansys/3550.bin advansys/38C0800.bin
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 3f8c4f6bc43f..c437e14f0b11 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -597,6 +597,9 @@ Driver: PCMCIA_PCNET - NE2000 compatible PCMCIA adapter
 
 File: cis/LA-PCM.cis
       cis/PCMLM28.cis
+      cis/DP83903.cis
+      cis/NE2K.cis
+      cis/tamarack.cis
 
 Licence: GPL
 
@@ -628,6 +631,8 @@ Driver: SERIAL_8250_CS - Serial PCMCIA adapter
 
 File: cis/MT5634ZLX.cis
       cis/RS-COM-2P.cis
+      cis/COMpad2.cis
+      cis/COMpad4.cis
 
 Licence: GPL
 
diff --git a/firmware/cis/COMpad2.cis.ihex b/firmware/cis/COMpad2.cis.ihex
new file mode 100644
index 000000000000..1671c5e48caa
--- /dev/null
+++ b/firmware/cis/COMpad2.cis.ihex
@@ -0,0 +1,11 @@
+:1000000001030000FF151F0401414456414E5445B1
+:10001000434800434F4D7061642D33322F38350013
+:10002000312E300000FF210202011A0501050001F6
+:10003000031B0EC18118AA61E80207E8030730B864
+:100040009E1B08820108AA6030030F1B0883010869
+:10005000AA6040030F1B08840108AA6050030F1B0D
+:0D00600008850108AA6060030F1400FF006E
+:00000001FF
+#
+# Replacement CIS for Advantech COMpad-32/85
+#
diff --git a/firmware/cis/COMpad4.cis.ihex b/firmware/cis/COMpad4.cis.ihex
new file mode 100644
index 000000000000..27bbec1921b3
--- /dev/null
+++ b/firmware/cis/COMpad4.cis.ihex
@@ -0,0 +1,9 @@
+:1000000001030000FF151F0401414456414E5445B1
+:10001000434800434F4D7061642D33322F383542D1
+:100020002D34000000FF210202011A050102000127
+:10003000011B0BC18118AA6040021F30B89E1B082B
+:0C004000820108AA6040031F1400FF00AA
+:00000001FF
+#
+# Replacement CIS for Advantech COMpad-32/85B-4
+#
diff --git a/firmware/cis/DP83903.cis.ihex b/firmware/cis/DP83903.cis.ihex
new file mode 100644
index 000000000000..6d73ea3cf1b8
--- /dev/null
+++ b/firmware/cis/DP83903.cis.ihex
@@ -0,0 +1,14 @@
+:1000000001030000FF152904014D756C74696675C4
+:100010006E6374696F6E20436172640000004E531A
+:1000200043204D46204C414E2F4D6F64656D00FFBF
+:1000300020047501000021020000060B02004900A7
+:100040000000006A000000FF00130343495321022F
+:1000500006001A060517201077021B0C970179017C
+:10006000556530FFFF284000FF001303434953212B
+:100070000202001A060507401077021B09870119C2
+:0800800001552330FFFFFF00D2
+:00000001FF
+#
+# This CIS is for cards based on the National Semiconductor
+# DP83903 Multiple Function Interface Chip
+#
diff --git a/firmware/cis/NE2K.cis.ihex b/firmware/cis/NE2K.cis.ihex
new file mode 100644
index 000000000000..1bb40fc4759f
--- /dev/null
+++ b/firmware/cis/NE2K.cis.ihex
@@ -0,0 +1,8 @@
+:1000000001030000FF1515040150434D4349410011
+:1000100045746865726E6574000000FF2102060079
+:100020001A050120F803031B09E001190155653089
+:06003000FFFF1400FF00B9
+:00000001FF
+#
+# Replacement CIS for various busted NE2000-compatible cards
+#
diff --git a/firmware/cis/tamarack.cis.ihex b/firmware/cis/tamarack.cis.ihex
new file mode 100644
index 000000000000..1e86547fb361
--- /dev/null
+++ b/firmware/cis/tamarack.cis.ihex
@@ -0,0 +1,10 @@
+:100000000103D400FF17034100FF152404015441EC
+:100010004D415241434B0045746865726E657400F2
+:10002000410030303437343331313830303100FF33
+:10003000210206001A050120F803031B14E08119B0
+:100040003F554D5D06864626E551000F100F30FFE7
+:05005000FF1400FF0099
+:00000001FF
+#
+# Replacement CIS for Surecom, Tamarack NE2000 cards
+#
diff --git a/fs/Kconfig b/fs/Kconfig
index d4bf8caad8d0..2126078a38ed 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -135,8 +135,8 @@ config TMPFS_POSIX_ACL
 
 config HUGETLBFS
 	bool "HugeTLB file system support"
-	depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \
-		   (S390 && 64BIT) || SYS_SUPPORTS_HUGETLBFS || BROKEN
+	depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (S390 && 64BIT) || \
+		   SYS_SUPPORTS_HUGETLBFS || BROKEN
 	help
 	  hugetlbfs is a filesystem backing for HugeTLB pages, based on
 	  ramfs. For architectures that support it, say Y here and read
diff --git a/fs/afs/cache.h b/fs/afs/cache.h
deleted file mode 100644
index 5c4f6b499e90..000000000000
--- a/fs/afs/cache.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* AFS local cache management interface
- *
- * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/fscache.h>
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 106be66dafd2..6ece2a13bf71 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -18,10 +18,10 @@
 #include <linux/key.h>
 #include <linux/workqueue.h>
 #include <linux/sched.h>
+#include <linux/fscache.h>
 
 #include "afs.h"
 #include "afs_vl.h"
-#include "cache.h"
 
 #define AFS_CELL_MAX_ADDRS 15
 
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index d11c51fc2a3f..2ca7a7cafdbf 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -8,8 +8,10 @@
  *
  */
 
+#include <linux/cred.h>
 #include <linux/file.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/fs.h>
diff --git a/fs/bio.c b/fs/bio.c
index 76738005c8e8..402cb84a92a1 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -249,6 +249,7 @@ void bio_free(struct bio *bio, struct bio_set *bs)
 
 	mempool_free(p, bs->bio_pool);
 }
+EXPORT_SYMBOL(bio_free);
 
 void bio_init(struct bio *bio)
 {
@@ -257,6 +258,7 @@ void bio_init(struct bio *bio)
 	bio->bi_comp_cpu = -1;
 	atomic_set(&bio->bi_cnt, 1);
 }
+EXPORT_SYMBOL(bio_init);
 
 /**
  * bio_alloc_bioset - allocate a bio for I/O
@@ -311,6 +313,7 @@ err_free:
 	mempool_free(p, bs->bio_pool);
 	return NULL;
 }
+EXPORT_SYMBOL(bio_alloc_bioset);
 
 static void bio_fs_destructor(struct bio *bio)
 {
@@ -337,6 +340,7 @@ struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
 
 	return bio;
 }
+EXPORT_SYMBOL(bio_alloc);
 
 static void bio_kmalloc_destructor(struct bio *bio)
 {
@@ -380,6 +384,7 @@ struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
 
 	return bio;
 }
+EXPORT_SYMBOL(bio_kmalloc);
 
 void zero_fill_bio(struct bio *bio)
 {
@@ -416,6 +421,7 @@ void bio_put(struct bio *bio)
 		bio->bi_destructor(bio);
 	}
 }
+EXPORT_SYMBOL(bio_put);
 
 inline int bio_phys_segments(struct request_queue *q, struct bio *bio)
 {
@@ -424,6 +430,7 @@ inline int bio_phys_segments(struct request_queue *q, struct bio *bio)
 
 	return bio->bi_phys_segments;
 }
+EXPORT_SYMBOL(bio_phys_segments);
 
 /**
  * 	__bio_clone	-	clone a bio
@@ -451,6 +458,7 @@ void __bio_clone(struct bio *bio, struct bio *bio_src)
 	bio->bi_size = bio_src->bi_size;
 	bio->bi_idx = bio_src->bi_idx;
 }
+EXPORT_SYMBOL(__bio_clone);
 
 /**
  *	bio_clone	-	clone a bio
@@ -482,6 +490,7 @@ struct bio *bio_clone(struct bio *bio, gfp_t gfp_mask)
 
 	return b;
 }
+EXPORT_SYMBOL(bio_clone);
 
 /**
  *	bio_get_nr_vecs		- return approx number of vecs
@@ -505,6 +514,7 @@ int bio_get_nr_vecs(struct block_device *bdev)
 
 	return nr_pages;
 }
+EXPORT_SYMBOL(bio_get_nr_vecs);
 
 static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
 			  *page, unsigned int len, unsigned int offset,
@@ -635,6 +645,7 @@ int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page *page,
 	return __bio_add_page(q, bio, page, len, offset,
 			      queue_max_hw_sectors(q));
 }
+EXPORT_SYMBOL(bio_add_pc_page);
 
 /**
  *	bio_add_page	-	attempt to add page to bio
@@ -655,6 +666,7 @@ int bio_add_page(struct bio *bio, struct page *page, unsigned int len,
 	struct request_queue *q = bdev_get_queue(bio->bi_bdev);
 	return __bio_add_page(q, bio, page, len, offset, queue_max_sectors(q));
 }
+EXPORT_SYMBOL(bio_add_page);
 
 struct bio_map_data {
 	struct bio_vec *iovecs;
@@ -776,6 +788,7 @@ int bio_uncopy_user(struct bio *bio)
 	bio_put(bio);
 	return ret;
 }
+EXPORT_SYMBOL(bio_uncopy_user);
 
 /**
  *	bio_copy_user_iov	-	copy user data to bio
@@ -920,6 +933,7 @@ struct bio *bio_copy_user(struct request_queue *q, struct rq_map_data *map_data,
 
 	return bio_copy_user_iov(q, map_data, &iov, 1, write_to_vm, gfp_mask);
 }
+EXPORT_SYMBOL(bio_copy_user);
 
 static struct bio *__bio_map_user_iov(struct request_queue *q,
 				      struct block_device *bdev,
@@ -1050,6 +1064,7 @@ struct bio *bio_map_user(struct request_queue *q, struct block_device *bdev,
 
 	return bio_map_user_iov(q, bdev, &iov, 1, write_to_vm, gfp_mask);
 }
+EXPORT_SYMBOL(bio_map_user);
 
 /**
  *	bio_map_user_iov - map user sg_iovec table into bio
@@ -1117,13 +1132,13 @@ void bio_unmap_user(struct bio *bio)
 	__bio_unmap_user(bio);
 	bio_put(bio);
 }
+EXPORT_SYMBOL(bio_unmap_user);
 
 static void bio_map_kern_endio(struct bio *bio, int err)
 {
 	bio_put(bio);
 }
 
-
 static struct bio *__bio_map_kern(struct request_queue *q, void *data,
 				  unsigned int len, gfp_t gfp_mask)
 {
@@ -1189,6 +1204,7 @@ struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
 	bio_put(bio);
 	return ERR_PTR(-EINVAL);
 }
+EXPORT_SYMBOL(bio_map_kern);
 
 static void bio_copy_kern_endio(struct bio *bio, int err)
 {
@@ -1250,6 +1266,7 @@ struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len,
 
 	return bio;
 }
+EXPORT_SYMBOL(bio_copy_kern);
 
 /*
  * bio_set_pages_dirty() and bio_check_pages_dirty() are support functions
@@ -1400,6 +1417,7 @@ void bio_endio(struct bio *bio, int error)
 	if (bio->bi_end_io)
 		bio->bi_end_io(bio, error);
 }
+EXPORT_SYMBOL(bio_endio);
 
 void bio_pair_release(struct bio_pair *bp)
 {
@@ -1410,6 +1428,7 @@ void bio_pair_release(struct bio_pair *bp)
 		mempool_free(bp, bp->bio2.bi_private);
 	}
 }
+EXPORT_SYMBOL(bio_pair_release);
 
 static void bio_pair_end_1(struct bio *bi, int err)
 {
@@ -1477,6 +1496,7 @@ struct bio_pair *bio_split(struct bio *bi, int first_sectors)
 
 	return bp;
 }
+EXPORT_SYMBOL(bio_split);
 
 /**
  *      bio_sector_offset - Find hardware sector offset in bio
@@ -1547,6 +1567,7 @@ void bioset_free(struct bio_set *bs)
 
 	kfree(bs);
 }
+EXPORT_SYMBOL(bioset_free);
 
 /**
  * bioset_create  - Create a bio_set
@@ -1592,6 +1613,7 @@ bad:
 	bioset_free(bs);
 	return NULL;
 }
+EXPORT_SYMBOL(bioset_create);
 
 static void __init biovec_init_slabs(void)
 {
@@ -1636,29 +1658,4 @@ static int __init init_bio(void)
 
 	return 0;
 }
-
 subsys_initcall(init_bio);
-
-EXPORT_SYMBOL(bio_alloc);
-EXPORT_SYMBOL(bio_kmalloc);
-EXPORT_SYMBOL(bio_put);
-EXPORT_SYMBOL(bio_free);
-EXPORT_SYMBOL(bio_endio);
-EXPORT_SYMBOL(bio_init);
-EXPORT_SYMBOL(__bio_clone);
-EXPORT_SYMBOL(bio_clone);
-EXPORT_SYMBOL(bio_phys_segments);
-EXPORT_SYMBOL(bio_add_page);
-EXPORT_SYMBOL(bio_add_pc_page);
-EXPORT_SYMBOL(bio_get_nr_vecs);
-EXPORT_SYMBOL(bio_map_user);
-EXPORT_SYMBOL(bio_unmap_user);
-EXPORT_SYMBOL(bio_map_kern);
-EXPORT_SYMBOL(bio_copy_kern);
-EXPORT_SYMBOL(bio_pair_release);
-EXPORT_SYMBOL(bio_split);
-EXPORT_SYMBOL(bio_copy_user);
-EXPORT_SYMBOL(bio_uncopy_user);
-EXPORT_SYMBOL(bioset_create);
-EXPORT_SYMBOL(bioset_free);
-EXPORT_SYMBOL(bio_alloc_bioset);
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 9cf4b926f8e4..8bed0557d88c 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1248,8 +1248,8 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 			bd_set_size(bdev, (loff_t)bdev->bd_part->nr_sects << 9);
 		}
 	} else {
-		put_disk(disk);
 		module_put(disk->fops->owner);
+		put_disk(disk);
 		disk = NULL;
 		if (bdev->bd_contains == bdev) {
 			if (bdev->bd_disk->fops->open) {
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index f128427b995b..361604244271 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -27,7 +27,7 @@
 #include "btrfs_inode.h"
 #include "xattr.h"
 
-#ifdef CONFIG_FS_POSIX_ACL
+#ifdef CONFIG_BTRFS_FS_POSIX_ACL
 
 static struct posix_acl *btrfs_get_acl(struct inode *inode, int type)
 {
@@ -313,7 +313,7 @@ struct xattr_handler btrfs_xattr_acl_access_handler = {
 	.set	= btrfs_xattr_acl_access_set,
 };
 
-#else /* CONFIG_FS_POSIX_ACL */
+#else /* CONFIG_BTRFS_FS_POSIX_ACL */
 
 int btrfs_acl_chmod(struct inode *inode)
 {
@@ -325,4 +325,4 @@ int btrfs_init_acl(struct inode *inode, struct inode *dir)
 	return 0;
 }
 
-#endif /* CONFIG_FS_POSIX_ACL */
+#endif /* CONFIG_BTRFS_FS_POSIX_ACL */
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 282ca085c2fb..c0861e781cdb 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -64,6 +64,51 @@ struct btrfs_worker_thread {
 };
 
 /*
+ * btrfs_start_workers uses kthread_run, which can block waiting for memory
+ * for a very long time.  It will actually throttle on page writeback,
+ * and so it may not make progress until after our btrfs worker threads
+ * process all of the pending work structs in their queue
+ *
+ * This means we can't use btrfs_start_workers from inside a btrfs worker
+ * thread that is used as part of cleaning dirty memory, which pretty much
+ * involves all of the worker threads.
+ *
+ * Instead we have a helper queue who never has more than one thread
+ * where we scheduler thread start operations.  This worker_start struct
+ * is used to contain the work and hold a pointer to the queue that needs
+ * another worker.
+ */
+struct worker_start {
+	struct btrfs_work work;
+	struct btrfs_workers *queue;
+};
+
+static void start_new_worker_func(struct btrfs_work *work)
+{
+	struct worker_start *start;
+	start = container_of(work, struct worker_start, work);
+	btrfs_start_workers(start->queue, 1);
+	kfree(start);
+}
+
+static int start_new_worker(struct btrfs_workers *queue)
+{
+	struct worker_start *start;
+	int ret;
+
+	start = kzalloc(sizeof(*start), GFP_NOFS);
+	if (!start)
+		return -ENOMEM;
+
+	start->work.func = start_new_worker_func;
+	start->queue = queue;
+	ret = btrfs_queue_worker(queue->atomic_worker_start, &start->work);
+	if (ret)
+		kfree(start);
+	return ret;
+}
+
+/*
  * helper function to move a thread onto the idle list after it
  * has finished some requests.
  */
@@ -118,11 +163,13 @@ static void check_pending_worker_creates(struct btrfs_worker_thread *worker)
 		goto out;
 
 	workers->atomic_start_pending = 0;
-	if (workers->num_workers >= workers->max_workers)
+	if (workers->num_workers + workers->num_workers_starting >=
+	    workers->max_workers)
 		goto out;
 
+	workers->num_workers_starting += 1;
 	spin_unlock_irqrestore(&workers->lock, flags);
-	btrfs_start_workers(workers, 1);
+	start_new_worker(workers);
 	return;
 
 out:
@@ -390,9 +437,11 @@ int btrfs_stop_workers(struct btrfs_workers *workers)
 /*
  * simple init on struct btrfs_workers
  */
-void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max)
+void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max,
+			struct btrfs_workers *async_helper)
 {
 	workers->num_workers = 0;
+	workers->num_workers_starting = 0;
 	INIT_LIST_HEAD(&workers->worker_list);
 	INIT_LIST_HEAD(&workers->idle_list);
 	INIT_LIST_HEAD(&workers->order_list);
@@ -404,14 +453,15 @@ void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max)
 	workers->name = name;
 	workers->ordered = 0;
 	workers->atomic_start_pending = 0;
-	workers->atomic_worker_start = 0;
+	workers->atomic_worker_start = async_helper;
 }
 
 /*
  * starts new worker threads.  This does not enforce the max worker
  * count in case you need to temporarily go past it.
  */
-int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
+static int __btrfs_start_workers(struct btrfs_workers *workers,
+				 int num_workers)
 {
 	struct btrfs_worker_thread *worker;
 	int ret = 0;
@@ -444,6 +494,8 @@ int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
 		list_add_tail(&worker->worker_list, &workers->idle_list);
 		worker->idle = 1;
 		workers->num_workers++;
+		workers->num_workers_starting--;
+		WARN_ON(workers->num_workers_starting < 0);
 		spin_unlock_irq(&workers->lock);
 	}
 	return 0;
@@ -452,6 +504,14 @@ fail:
 	return ret;
 }
 
+int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
+{
+	spin_lock_irq(&workers->lock);
+	workers->num_workers_starting += num_workers;
+	spin_unlock_irq(&workers->lock);
+	return __btrfs_start_workers(workers, num_workers);
+}
+
 /*
  * run through the list and find a worker thread that doesn't have a lot
  * to do right now.  This can return null if we aren't yet at the thread
@@ -461,7 +521,10 @@ static struct btrfs_worker_thread *next_worker(struct btrfs_workers *workers)
 {
 	struct btrfs_worker_thread *worker;
 	struct list_head *next;
-	int enforce_min = workers->num_workers < workers->max_workers;
+	int enforce_min;
+
+	enforce_min = (workers->num_workers + workers->num_workers_starting) <
+		workers->max_workers;
 
 	/*
 	 * if we find an idle thread, don't move it to the end of the
@@ -509,15 +572,17 @@ again:
 	worker = next_worker(workers);
 
 	if (!worker) {
-		if (workers->num_workers >= workers->max_workers) {
+		if (workers->num_workers + workers->num_workers_starting >=
+		    workers->max_workers) {
 			goto fallback;
 		} else if (workers->atomic_worker_start) {
 			workers->atomic_start_pending = 1;
 			goto fallback;
 		} else {
+			workers->num_workers_starting++;
 			spin_unlock_irqrestore(&workers->lock, flags);
 			/* we're below the limit, start another worker */
-			btrfs_start_workers(workers, 1);
+			__btrfs_start_workers(workers, 1);
 			goto again;
 		}
 	}
diff --git a/fs/btrfs/async-thread.h b/fs/btrfs/async-thread.h
index fc089b95ec14..5077746cf85e 100644
--- a/fs/btrfs/async-thread.h
+++ b/fs/btrfs/async-thread.h
@@ -64,6 +64,8 @@ struct btrfs_workers {
 	/* current number of running workers */
 	int num_workers;
 
+	int num_workers_starting;
+
 	/* max number of workers allowed.  changed by btrfs_start_workers */
 	int max_workers;
 
@@ -78,9 +80,10 @@ struct btrfs_workers {
 
 	/*
 	 * are we allowed to sleep while starting workers or are we required
-	 * to start them at a later time?
+	 * to start them at a later time?  If we can't sleep, this indicates
+	 * which queue we need to use to schedule thread creation.
 	 */
-	int atomic_worker_start;
+	struct btrfs_workers *atomic_worker_start;
 
 	/* list with all the work threads.  The workers on the idle thread
 	 * may be actively servicing jobs, but they haven't yet hit the
@@ -109,7 +112,8 @@ struct btrfs_workers {
 int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work);
 int btrfs_start_workers(struct btrfs_workers *workers, int num_workers);
 int btrfs_stop_workers(struct btrfs_workers *workers);
-void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max);
+void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max,
+			struct btrfs_workers *async_starter);
 int btrfs_requeue_work(struct btrfs_work *work);
 void btrfs_set_work_high_prio(struct btrfs_work *work);
 #endif
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index 82ee56bba299..f6783a42f010 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -86,6 +86,12 @@ struct btrfs_inode {
 	 * transid of the trans_handle that last modified this inode
 	 */
 	u64 last_trans;
+
+	/*
+	 * log transid when this inode was last modified
+	 */
+	u64 last_sub_trans;
+
 	/*
 	 * transid that last logged this inode
 	 */
@@ -128,6 +134,16 @@ struct btrfs_inode {
 	u64 last_unlink_trans;
 
 	/*
+	 * Counters to keep track of the number of extent item's we may use due
+	 * to delalloc and such.  outstanding_extents is the number of extent
+	 * items we think we'll end up using, and reserved_extents is the number
+	 * of extent items we've reserved metadata for.
+	 */
+	spinlock_t accounting_lock;
+	int reserved_extents;
+	int outstanding_extents;
+
+	/*
 	 * ordered_data_close is set by truncate when a file that used
 	 * to have good data has been truncated to zero.  When it is set
 	 * the btrfs file release call will add this inode to the
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 80599b4e42bd..444b3e9b92a4 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -675,21 +675,28 @@ struct btrfs_space_info {
 				   current allocations */
 	u64 bytes_readonly;	/* total bytes that are read only */
 	u64 bytes_super;	/* total bytes reserved for the super blocks */
-
-	/* delalloc accounting */
-	u64 bytes_delalloc;	/* number of bytes reserved for allocation,
-				   this space is not necessarily reserved yet
-				   by the allocator */
+	u64 bytes_root;		/* the number of bytes needed to commit a
+				   transaction */
 	u64 bytes_may_use;	/* number of bytes that may be used for
-				   delalloc */
+				   delalloc/allocations */
+	u64 bytes_delalloc;	/* number of bytes currently reserved for
+				   delayed allocation */
 
 	int full;		/* indicates that we cannot allocate any more
 				   chunks for this space */
 	int force_alloc;	/* set if we need to force a chunk alloc for
 				   this space */
+	int force_delalloc;	/* make people start doing filemap_flush until
+				   we're under a threshold */
 
 	struct list_head list;
 
+	/* for controlling how we free up space for allocations */
+	wait_queue_head_t allocate_wait;
+	wait_queue_head_t flush_wait;
+	int allocating_chunk;
+	int flushing;
+
 	/* for block groups in our same type */
 	struct list_head block_groups;
 	spinlock_t lock;
@@ -903,6 +910,7 @@ struct btrfs_fs_info {
 	 * A third pool does submit_bio to avoid deadlocking with the other
 	 * two
 	 */
+	struct btrfs_workers generic_worker;
 	struct btrfs_workers workers;
 	struct btrfs_workers delalloc_workers;
 	struct btrfs_workers endio_workers;
@@ -910,6 +918,7 @@ struct btrfs_fs_info {
 	struct btrfs_workers endio_meta_write_workers;
 	struct btrfs_workers endio_write_workers;
 	struct btrfs_workers submit_workers;
+	struct btrfs_workers enospc_workers;
 	/*
 	 * fixup workers take dirty pages that didn't properly go through
 	 * the cow mechanism and make them safe to write.  It happens
@@ -1000,7 +1009,10 @@ struct btrfs_root {
 	atomic_t log_writers;
 	atomic_t log_commit[2];
 	unsigned long log_transid;
+	unsigned long last_log_commit;
 	unsigned long log_batch;
+	pid_t log_start_pid;
+	bool log_multiple_pids;
 
 	u64 objectid;
 	u64 last_trans;
@@ -1141,6 +1153,7 @@ struct btrfs_root {
 #define BTRFS_MOUNT_FLUSHONCOMMIT       (1 << 7)
 #define BTRFS_MOUNT_SSD_SPREAD		(1 << 8)
 #define BTRFS_MOUNT_NOSSD		(1 << 9)
+#define BTRFS_MOUNT_DISCARD		(1 << 10)
 
 #define btrfs_clear_opt(o, opt)		((o) &= ~BTRFS_MOUNT_##opt)
 #define btrfs_set_opt(o, opt)		((o) |= BTRFS_MOUNT_##opt)
@@ -2022,7 +2035,12 @@ u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
 void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
 void btrfs_clear_space_info_full(struct btrfs_fs_info *info);
 
-int btrfs_check_metadata_free_space(struct btrfs_root *root);
+int btrfs_reserve_metadata_space(struct btrfs_root *root, int num_items);
+int btrfs_unreserve_metadata_space(struct btrfs_root *root, int num_items);
+int btrfs_unreserve_metadata_for_delalloc(struct btrfs_root *root,
+					  struct inode *inode, int num_items);
+int btrfs_reserve_metadata_for_delalloc(struct btrfs_root *root,
+					struct inode *inode, int num_items);
 int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
 				u64 bytes);
 void btrfs_free_reserved_data_space(struct btrfs_root *root,
@@ -2314,7 +2332,7 @@ int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode);
 void btrfs_orphan_cleanup(struct btrfs_root *root);
 int btrfs_cont_expand(struct inode *inode, loff_t size);
 int btrfs_invalidate_inodes(struct btrfs_root *root);
-extern struct dentry_operations btrfs_dentry_operations;
+extern const struct dentry_operations btrfs_dentry_operations;
 
 /* ioctl.c */
 long btrfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
@@ -2326,7 +2344,7 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync);
 int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end,
 			    int skip_pinned);
 int btrfs_check_file(struct btrfs_root *root, struct inode *inode);
-extern struct file_operations btrfs_file_operations;
+extern const struct file_operations btrfs_file_operations;
 int btrfs_drop_extents(struct btrfs_trans_handle *trans,
 		       struct btrfs_root *root, struct inode *inode,
 		       u64 start, u64 end, u64 locked_end,
@@ -2357,7 +2375,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options);
 int btrfs_sync_fs(struct super_block *sb, int wait);
 
 /* acl.c */
-#ifdef CONFIG_FS_POSIX_ACL
+#ifdef CONFIG_BTRFS_FS_POSIX_ACL
 int btrfs_check_acl(struct inode *inode, int mask);
 #else
 #define btrfs_check_acl NULL
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 644e796fd643..02b6afbd7450 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -822,14 +822,14 @@ struct extent_buffer *btrfs_find_create_tree_block(struct btrfs_root *root,
 
 int btrfs_write_tree_block(struct extent_buffer *buf)
 {
-	return btrfs_fdatawrite_range(buf->first_page->mapping, buf->start,
-				      buf->start + buf->len - 1, WB_SYNC_ALL);
+	return filemap_fdatawrite_range(buf->first_page->mapping, buf->start,
+					buf->start + buf->len - 1);
 }
 
 int btrfs_wait_tree_block_writeback(struct extent_buffer *buf)
 {
-	return btrfs_wait_on_page_writeback_range(buf->first_page->mapping,
-				  buf->start, buf->start + buf->len - 1);
+	return filemap_fdatawait_range(buf->first_page->mapping,
+				       buf->start, buf->start + buf->len - 1);
 }
 
 struct extent_buffer *read_tree_block(struct btrfs_root *root, u64 bytenr,
@@ -917,6 +917,7 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize,
 	atomic_set(&root->log_writers, 0);
 	root->log_batch = 0;
 	root->log_transid = 0;
+	root->last_log_commit = 0;
 	extent_io_tree_init(&root->dirty_log_pages,
 			     fs_info->btree_inode->i_mapping, GFP_NOFS);
 
@@ -1087,6 +1088,7 @@ int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
 	WARN_ON(root->log_root);
 	root->log_root = log_root;
 	root->log_transid = 0;
+	root->last_log_commit = 0;
 	return 0;
 }
 
@@ -1630,7 +1632,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	fs_info->sb = sb;
 	fs_info->max_extent = (u64)-1;
 	fs_info->max_inline = 8192 * 1024;
-	fs_info->metadata_ratio = 8;
+	fs_info->metadata_ratio = 0;
 
 	fs_info->thread_pool_size = min_t(unsigned long,
 					  num_online_cpus() + 2, 8);
@@ -1746,21 +1748,25 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 		err = -EINVAL;
 		goto fail_iput;
 	}
-printk("thread pool is %d\n", fs_info->thread_pool_size);
-	/*
-	 * we need to start all the end_io workers up front because the
-	 * queue work function gets called at interrupt time, and so it
-	 * cannot dynamically grow.
-	 */
+
+	btrfs_init_workers(&fs_info->generic_worker,
+			   "genwork", 1, NULL);
+
 	btrfs_init_workers(&fs_info->workers, "worker",
-			   fs_info->thread_pool_size);
+			   fs_info->thread_pool_size,
+			   &fs_info->generic_worker);
 
 	btrfs_init_workers(&fs_info->delalloc_workers, "delalloc",
-			   fs_info->thread_pool_size);
+			   fs_info->thread_pool_size,
+			   &fs_info->generic_worker);
 
 	btrfs_init_workers(&fs_info->submit_workers, "submit",
 			   min_t(u64, fs_devices->num_devices,
-			   fs_info->thread_pool_size));
+			   fs_info->thread_pool_size),
+			   &fs_info->generic_worker);
+	btrfs_init_workers(&fs_info->enospc_workers, "enospc",
+			   fs_info->thread_pool_size,
+			   &fs_info->generic_worker);
 
 	/* a higher idle thresh on the submit workers makes it much more
 	 * likely that bios will be send down in a sane order to the
@@ -1774,15 +1780,20 @@ printk("thread pool is %d\n", fs_info->thread_pool_size);
 	fs_info->delalloc_workers.idle_thresh = 2;
 	fs_info->delalloc_workers.ordered = 1;
 
-	btrfs_init_workers(&fs_info->fixup_workers, "fixup", 1);
+	btrfs_init_workers(&fs_info->fixup_workers, "fixup", 1,
+			   &fs_info->generic_worker);
 	btrfs_init_workers(&fs_info->endio_workers, "endio",
-			   fs_info->thread_pool_size);
+			   fs_info->thread_pool_size,
+			   &fs_info->generic_worker);
 	btrfs_init_workers(&fs_info->endio_meta_workers, "endio-meta",
-			   fs_info->thread_pool_size);
+			   fs_info->thread_pool_size,
+			   &fs_info->generic_worker);
 	btrfs_init_workers(&fs_info->endio_meta_write_workers,
-			   "endio-meta-write", fs_info->thread_pool_size);
+			   "endio-meta-write", fs_info->thread_pool_size,
+			   &fs_info->generic_worker);
 	btrfs_init_workers(&fs_info->endio_write_workers, "endio-write",
-			   fs_info->thread_pool_size);
+			   fs_info->thread_pool_size,
+			   &fs_info->generic_worker);
 
 	/*
 	 * endios are largely parallel and should have a very
@@ -1794,12 +1805,8 @@ printk("thread pool is %d\n", fs_info->thread_pool_size);
 	fs_info->endio_write_workers.idle_thresh = 2;
 	fs_info->endio_meta_write_workers.idle_thresh = 2;
 
-	fs_info->endio_workers.atomic_worker_start = 1;
-	fs_info->endio_meta_workers.atomic_worker_start = 1;
-	fs_info->endio_write_workers.atomic_worker_start = 1;
-	fs_info->endio_meta_write_workers.atomic_worker_start = 1;
-
 	btrfs_start_workers(&fs_info->workers, 1);
+	btrfs_start_workers(&fs_info->generic_worker, 1);
 	btrfs_start_workers(&fs_info->submit_workers, 1);
 	btrfs_start_workers(&fs_info->delalloc_workers, 1);
 	btrfs_start_workers(&fs_info->fixup_workers, 1);
@@ -1807,6 +1814,7 @@ printk("thread pool is %d\n", fs_info->thread_pool_size);
 	btrfs_start_workers(&fs_info->endio_meta_workers, 1);
 	btrfs_start_workers(&fs_info->endio_meta_write_workers, 1);
 	btrfs_start_workers(&fs_info->endio_write_workers, 1);
+	btrfs_start_workers(&fs_info->enospc_workers, 1);
 
 	fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super);
 	fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages,
@@ -2012,6 +2020,7 @@ fail_chunk_root:
 	free_extent_buffer(chunk_root->node);
 	free_extent_buffer(chunk_root->commit_root);
 fail_sb_buffer:
+	btrfs_stop_workers(&fs_info->generic_worker);
 	btrfs_stop_workers(&fs_info->fixup_workers);
 	btrfs_stop_workers(&fs_info->delalloc_workers);
 	btrfs_stop_workers(&fs_info->workers);
@@ -2020,6 +2029,7 @@ fail_sb_buffer:
 	btrfs_stop_workers(&fs_info->endio_meta_write_workers);
 	btrfs_stop_workers(&fs_info->endio_write_workers);
 	btrfs_stop_workers(&fs_info->submit_workers);
+	btrfs_stop_workers(&fs_info->enospc_workers);
 fail_iput:
 	invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
 	iput(fs_info->btree_inode);
@@ -2437,6 +2447,7 @@ int close_ctree(struct btrfs_root *root)
 
 	iput(fs_info->btree_inode);
 
+	btrfs_stop_workers(&fs_info->generic_worker);
 	btrfs_stop_workers(&fs_info->fixup_workers);
 	btrfs_stop_workers(&fs_info->delalloc_workers);
 	btrfs_stop_workers(&fs_info->workers);
@@ -2445,6 +2456,7 @@ int close_ctree(struct btrfs_root *root)
 	btrfs_stop_workers(&fs_info->endio_meta_write_workers);
 	btrfs_stop_workers(&fs_info->endio_write_workers);
 	btrfs_stop_workers(&fs_info->submit_workers);
+	btrfs_stop_workers(&fs_info->enospc_workers);
 
 	btrfs_close_devices(fs_info->fs_devices);
 	btrfs_mapping_tree_free(&fs_info->mapping_tree);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 993f93ff7ba6..e238a0cdac67 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -68,6 +68,8 @@ static int pin_down_bytes(struct btrfs_trans_handle *trans,
 			  struct extent_buffer **must_clean);
 static int find_next_key(struct btrfs_path *path, int level,
 			 struct btrfs_key *key);
+static void dump_space_info(struct btrfs_space_info *info, u64 bytes,
+			    int dump_block_groups);
 
 static noinline int
 block_group_cache_done(struct btrfs_block_group_cache *cache)
@@ -1566,23 +1568,23 @@ static int remove_extent_backref(struct btrfs_trans_handle *trans,
 	return ret;
 }
 
-#ifdef BIO_RW_DISCARD
 static void btrfs_issue_discard(struct block_device *bdev,
 				u64 start, u64 len)
 {
 	blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL,
 			     DISCARD_FL_BARRIER);
 }
-#endif
 
 static int btrfs_discard_extent(struct btrfs_root *root, u64 bytenr,
 				u64 num_bytes)
 {
-#ifdef BIO_RW_DISCARD
 	int ret;
 	u64 map_length = num_bytes;
 	struct btrfs_multi_bio *multi = NULL;
 
+	if (!btrfs_test_opt(root, DISCARD))
+		return 0;
+
 	/* Tell the block device(s) that the sectors can be discarded */
 	ret = btrfs_map_block(&root->fs_info->mapping_tree, READ,
 			      bytenr, &map_length, &multi, 0);
@@ -1602,9 +1604,6 @@ static int btrfs_discard_extent(struct btrfs_root *root, u64 bytenr,
 	}
 
 	return ret;
-#else
-	return 0;
-#endif
 }
 
 int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
@@ -2765,67 +2764,448 @@ void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *inode)
 						       alloc_target);
 }
 
+static u64 calculate_bytes_needed(struct btrfs_root *root, int num_items)
+{
+	u64 num_bytes;
+	int level;
+
+	level = BTRFS_MAX_LEVEL - 2;
+	/*
+	 * NOTE: these calculations are absolutely the worst possible case.
+	 * This assumes that _every_ item we insert will require a new leaf, and
+	 * that the tree has grown to its maximum level size.
+	 */
+
+	/*
+	 * for every item we insert we could insert both an extent item and a
+	 * extent ref item.  Then for ever item we insert, we will need to cow
+	 * both the original leaf, plus the leaf to the left and right of it.
+	 *
+	 * Unless we are talking about the extent root, then we just want the
+	 * number of items * 2, since we just need the extent item plus its ref.
+	 */
+	if (root == root->fs_info->extent_root)
+		num_bytes = num_items * 2;
+	else
+		num_bytes = (num_items + (2 * num_items)) * 3;
+
+	/*
+	 * num_bytes is total number of leaves we could need times the leaf
+	 * size, and then for every leaf we could end up cow'ing 2 nodes per
+	 * level, down to the leaf level.
+	 */
+	num_bytes = (num_bytes * root->leafsize) +
+		(num_bytes * (level * 2)) * root->nodesize;
+
+	return num_bytes;
+}
+
 /*
- * for now this just makes sure we have at least 5% of our metadata space free
- * for use.
+ * Unreserve metadata space for delalloc.  If we have less reserved credits than
+ * we have extents, this function does nothing.
  */
-int btrfs_check_metadata_free_space(struct btrfs_root *root)
+int btrfs_unreserve_metadata_for_delalloc(struct btrfs_root *root,
+					  struct inode *inode, int num_items)
 {
 	struct btrfs_fs_info *info = root->fs_info;
 	struct btrfs_space_info *meta_sinfo;
-	u64 alloc_target, thresh;
-	int committed = 0, ret;
+	u64 num_bytes;
+	u64 alloc_target;
+	bool bug = false;
 
 	/* get the space info for where the metadata will live */
 	alloc_target = btrfs_get_alloc_profile(root, 0);
 	meta_sinfo = __find_space_info(info, alloc_target);
-	if (!meta_sinfo)
-		goto alloc;
 
-again:
+	num_bytes = calculate_bytes_needed(root->fs_info->extent_root,
+					   num_items);
+
 	spin_lock(&meta_sinfo->lock);
-	if (!meta_sinfo->full)
-		thresh = meta_sinfo->total_bytes * 80;
-	else
-		thresh = meta_sinfo->total_bytes * 95;
+	spin_lock(&BTRFS_I(inode)->accounting_lock);
+	if (BTRFS_I(inode)->reserved_extents <=
+	    BTRFS_I(inode)->outstanding_extents) {
+		spin_unlock(&BTRFS_I(inode)->accounting_lock);
+		spin_unlock(&meta_sinfo->lock);
+		return 0;
+	}
+	spin_unlock(&BTRFS_I(inode)->accounting_lock);
+
+	BTRFS_I(inode)->reserved_extents--;
+	BUG_ON(BTRFS_I(inode)->reserved_extents < 0);
+
+	if (meta_sinfo->bytes_delalloc < num_bytes) {
+		bug = true;
+		meta_sinfo->bytes_delalloc = 0;
+	} else {
+		meta_sinfo->bytes_delalloc -= num_bytes;
+	}
+	spin_unlock(&meta_sinfo->lock);
 
+	BUG_ON(bug);
+
+	return 0;
+}
+
+static void check_force_delalloc(struct btrfs_space_info *meta_sinfo)
+{
+	u64 thresh;
+
+	thresh = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+		meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+		meta_sinfo->bytes_super + meta_sinfo->bytes_root +
+		meta_sinfo->bytes_may_use;
+
+	thresh = meta_sinfo->total_bytes - thresh;
+	thresh *= 80;
 	do_div(thresh, 100);
+	if (thresh <= meta_sinfo->bytes_delalloc)
+		meta_sinfo->force_delalloc = 1;
+	else
+		meta_sinfo->force_delalloc = 0;
+}
 
-	if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
-	    meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
-	    meta_sinfo->bytes_super > thresh) {
-		struct btrfs_trans_handle *trans;
-		if (!meta_sinfo->full) {
-			meta_sinfo->force_alloc = 1;
+struct async_flush {
+	struct btrfs_root *root;
+	struct btrfs_space_info *info;
+	struct btrfs_work work;
+};
+
+static noinline void flush_delalloc_async(struct btrfs_work *work)
+{
+	struct async_flush *async;
+	struct btrfs_root *root;
+	struct btrfs_space_info *info;
+
+	async = container_of(work, struct async_flush, work);
+	root = async->root;
+	info = async->info;
+
+	btrfs_start_delalloc_inodes(root);
+	wake_up(&info->flush_wait);
+	btrfs_wait_ordered_extents(root, 0);
+
+	spin_lock(&info->lock);
+	info->flushing = 0;
+	spin_unlock(&info->lock);
+	wake_up(&info->flush_wait);
+
+	kfree(async);
+}
+
+static void wait_on_flush(struct btrfs_space_info *info)
+{
+	DEFINE_WAIT(wait);
+	u64 used;
+
+	while (1) {
+		prepare_to_wait(&info->flush_wait, &wait,
+				TASK_UNINTERRUPTIBLE);
+		spin_lock(&info->lock);
+		if (!info->flushing) {
+			spin_unlock(&info->lock);
+			break;
+		}
+
+		used = info->bytes_used + info->bytes_reserved +
+			info->bytes_pinned + info->bytes_readonly +
+			info->bytes_super + info->bytes_root +
+			info->bytes_may_use + info->bytes_delalloc;
+		if (used < info->total_bytes) {
+			spin_unlock(&info->lock);
+			break;
+		}
+		spin_unlock(&info->lock);
+		schedule();
+	}
+	finish_wait(&info->flush_wait, &wait);
+}
+
+static void flush_delalloc(struct btrfs_root *root,
+				 struct btrfs_space_info *info)
+{
+	struct async_flush *async;
+	bool wait = false;
+
+	spin_lock(&info->lock);
+
+	if (!info->flushing) {
+		info->flushing = 1;
+		init_waitqueue_head(&info->flush_wait);
+	} else {
+		wait = true;
+	}
+
+	spin_unlock(&info->lock);
+
+	if (wait) {
+		wait_on_flush(info);
+		return;
+	}
+
+	async = kzalloc(sizeof(*async), GFP_NOFS);
+	if (!async)
+		goto flush;
+
+	async->root = root;
+	async->info = info;
+	async->work.func = flush_delalloc_async;
+
+	btrfs_queue_worker(&root->fs_info->enospc_workers,
+			   &async->work);
+	wait_on_flush(info);
+	return;
+
+flush:
+	btrfs_start_delalloc_inodes(root);
+	btrfs_wait_ordered_extents(root, 0);
+
+	spin_lock(&info->lock);
+	info->flushing = 0;
+	spin_unlock(&info->lock);
+	wake_up(&info->flush_wait);
+}
+
+static int maybe_allocate_chunk(struct btrfs_root *root,
+				 struct btrfs_space_info *info)
+{
+	struct btrfs_super_block *disk_super = &root->fs_info->super_copy;
+	struct btrfs_trans_handle *trans;
+	bool wait = false;
+	int ret = 0;
+	u64 min_metadata;
+	u64 free_space;
+
+	free_space = btrfs_super_total_bytes(disk_super);
+	/*
+	 * we allow the metadata to grow to a max of either 5gb or 5% of the
+	 * space in the volume.
+	 */
+	min_metadata = min((u64)5 * 1024 * 1024 * 1024,
+			     div64_u64(free_space * 5, 100));
+	if (info->total_bytes >= min_metadata) {
+		spin_unlock(&info->lock);
+		return 0;
+	}
+
+	if (info->full) {
+		spin_unlock(&info->lock);
+		return 0;
+	}
+
+	if (!info->allocating_chunk) {
+		info->force_alloc = 1;
+		info->allocating_chunk = 1;
+		init_waitqueue_head(&info->allocate_wait);
+	} else {
+		wait = true;
+	}
+
+	spin_unlock(&info->lock);
+
+	if (wait) {
+		wait_event(info->allocate_wait,
+			   !info->allocating_chunk);
+		return 1;
+	}
+
+	trans = btrfs_start_transaction(root, 1);
+	if (!trans) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+			     4096 + 2 * 1024 * 1024,
+			     info->flags, 0);
+	btrfs_end_transaction(trans, root);
+	if (ret)
+		goto out;
+out:
+	spin_lock(&info->lock);
+	info->allocating_chunk = 0;
+	spin_unlock(&info->lock);
+	wake_up(&info->allocate_wait);
+
+	if (ret)
+		return 0;
+	return 1;
+}
+
+/*
+ * Reserve metadata space for delalloc.
+ */
+int btrfs_reserve_metadata_for_delalloc(struct btrfs_root *root,
+					struct inode *inode, int num_items)
+{
+	struct btrfs_fs_info *info = root->fs_info;
+	struct btrfs_space_info *meta_sinfo;
+	u64 num_bytes;
+	u64 used;
+	u64 alloc_target;
+	int flushed = 0;
+	int force_delalloc;
+
+	/* get the space info for where the metadata will live */
+	alloc_target = btrfs_get_alloc_profile(root, 0);
+	meta_sinfo = __find_space_info(info, alloc_target);
+
+	num_bytes = calculate_bytes_needed(root->fs_info->extent_root,
+					   num_items);
+again:
+	spin_lock(&meta_sinfo->lock);
+
+	force_delalloc = meta_sinfo->force_delalloc;
+
+	if (unlikely(!meta_sinfo->bytes_root))
+		meta_sinfo->bytes_root = calculate_bytes_needed(root, 6);
+
+	if (!flushed)
+		meta_sinfo->bytes_delalloc += num_bytes;
+
+	used = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+		meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+		meta_sinfo->bytes_super + meta_sinfo->bytes_root +
+		meta_sinfo->bytes_may_use + meta_sinfo->bytes_delalloc;
+
+	if (used > meta_sinfo->total_bytes) {
+		flushed++;
+
+		if (flushed == 1) {
+			if (maybe_allocate_chunk(root, meta_sinfo))
+				goto again;
+			flushed++;
+		} else {
 			spin_unlock(&meta_sinfo->lock);
-alloc:
-			trans = btrfs_start_transaction(root, 1);
-			if (!trans)
-				return -ENOMEM;
+		}
 
-			ret = do_chunk_alloc(trans, root->fs_info->extent_root,
-					     2 * 1024 * 1024, alloc_target, 0);
-			btrfs_end_transaction(trans, root);
-			if (!meta_sinfo) {
-				meta_sinfo = __find_space_info(info,
-							       alloc_target);
-			}
+		if (flushed == 2) {
+			filemap_flush(inode->i_mapping);
+			goto again;
+		} else if (flushed == 3) {
+			flush_delalloc(root, meta_sinfo);
 			goto again;
 		}
+		spin_lock(&meta_sinfo->lock);
+		meta_sinfo->bytes_delalloc -= num_bytes;
 		spin_unlock(&meta_sinfo->lock);
+		printk(KERN_ERR "enospc, has %d, reserved %d\n",
+		       BTRFS_I(inode)->outstanding_extents,
+		       BTRFS_I(inode)->reserved_extents);
+		dump_space_info(meta_sinfo, 0, 0);
+		return -ENOSPC;
+	}
 
-		if (!committed) {
-			committed = 1;
-			trans = btrfs_join_transaction(root, 1);
-			if (!trans)
-				return -ENOMEM;
-			ret = btrfs_commit_transaction(trans, root);
-			if (ret)
-				return ret;
+	BTRFS_I(inode)->reserved_extents++;
+	check_force_delalloc(meta_sinfo);
+	spin_unlock(&meta_sinfo->lock);
+
+	if (!flushed && force_delalloc)
+		filemap_flush(inode->i_mapping);
+
+	return 0;
+}
+
+/*
+ * unreserve num_items number of items worth of metadata space.  This needs to
+ * be paired with btrfs_reserve_metadata_space.
+ *
+ * NOTE: if you have the option, run this _AFTER_ you do a
+ * btrfs_end_transaction, since btrfs_end_transaction will run delayed ref
+ * oprations which will result in more used metadata, so we want to make sure we
+ * can do that without issue.
+ */
+int btrfs_unreserve_metadata_space(struct btrfs_root *root, int num_items)
+{
+	struct btrfs_fs_info *info = root->fs_info;
+	struct btrfs_space_info *meta_sinfo;
+	u64 num_bytes;
+	u64 alloc_target;
+	bool bug = false;
+
+	/* get the space info for where the metadata will live */
+	alloc_target = btrfs_get_alloc_profile(root, 0);
+	meta_sinfo = __find_space_info(info, alloc_target);
+
+	num_bytes = calculate_bytes_needed(root, num_items);
+
+	spin_lock(&meta_sinfo->lock);
+	if (meta_sinfo->bytes_may_use < num_bytes) {
+		bug = true;
+		meta_sinfo->bytes_may_use = 0;
+	} else {
+		meta_sinfo->bytes_may_use -= num_bytes;
+	}
+	spin_unlock(&meta_sinfo->lock);
+
+	BUG_ON(bug);
+
+	return 0;
+}
+
+/*
+ * Reserve some metadata space for use.  We'll calculate the worste case number
+ * of bytes that would be needed to modify num_items number of items.  If we
+ * have space, fantastic, if not, you get -ENOSPC.  Please call
+ * btrfs_unreserve_metadata_space when you are done for the _SAME_ number of
+ * items you reserved, since whatever metadata you needed should have already
+ * been allocated.
+ *
+ * This will commit the transaction to make more space if we don't have enough
+ * metadata space.  THe only time we don't do this is if we're reserving space
+ * inside of a transaction, then we will just return -ENOSPC and it is the
+ * callers responsibility to handle it properly.
+ */
+int btrfs_reserve_metadata_space(struct btrfs_root *root, int num_items)
+{
+	struct btrfs_fs_info *info = root->fs_info;
+	struct btrfs_space_info *meta_sinfo;
+	u64 num_bytes;
+	u64 used;
+	u64 alloc_target;
+	int retries = 0;
+
+	/* get the space info for where the metadata will live */
+	alloc_target = btrfs_get_alloc_profile(root, 0);
+	meta_sinfo = __find_space_info(info, alloc_target);
+
+	num_bytes = calculate_bytes_needed(root, num_items);
+again:
+	spin_lock(&meta_sinfo->lock);
+
+	if (unlikely(!meta_sinfo->bytes_root))
+		meta_sinfo->bytes_root = calculate_bytes_needed(root, 6);
+
+	if (!retries)
+		meta_sinfo->bytes_may_use += num_bytes;
+
+	used = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+		meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+		meta_sinfo->bytes_super + meta_sinfo->bytes_root +
+		meta_sinfo->bytes_may_use + meta_sinfo->bytes_delalloc;
+
+	if (used > meta_sinfo->total_bytes) {
+		retries++;
+		if (retries == 1) {
+			if (maybe_allocate_chunk(root, meta_sinfo))
+				goto again;
+			retries++;
+		} else {
+			spin_unlock(&meta_sinfo->lock);
+		}
+
+		if (retries == 2) {
+			flush_delalloc(root, meta_sinfo);
 			goto again;
 		}
+		spin_lock(&meta_sinfo->lock);
+		meta_sinfo->bytes_may_use -= num_bytes;
+		spin_unlock(&meta_sinfo->lock);
+
+		dump_space_info(meta_sinfo, 0, 0);
 		return -ENOSPC;
 	}
+
+	check_force_delalloc(meta_sinfo);
 	spin_unlock(&meta_sinfo->lock);
 
 	return 0;
@@ -2888,7 +3268,7 @@ alloc:
 		spin_unlock(&data_sinfo->lock);
 
 		/* commit the current transaction and try again */
-		if (!committed) {
+		if (!committed && !root->fs_info->open_ioctl_trans) {
 			committed = 1;
 			trans = btrfs_join_transaction(root, 1);
 			if (!trans)
@@ -2916,7 +3296,7 @@ alloc:
 	BTRFS_I(inode)->reserved_bytes += bytes;
 	spin_unlock(&data_sinfo->lock);
 
-	return btrfs_check_metadata_free_space(root);
+	return 0;
 }
 
 /*
@@ -3015,17 +3395,15 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 	BUG_ON(!space_info);
 
 	spin_lock(&space_info->lock);
-	if (space_info->force_alloc) {
+	if (space_info->force_alloc)
 		force = 1;
-		space_info->force_alloc = 0;
-	}
 	if (space_info->full) {
 		spin_unlock(&space_info->lock);
 		goto out;
 	}
 
 	thresh = space_info->total_bytes - space_info->bytes_readonly;
-	thresh = div_factor(thresh, 6);
+	thresh = div_factor(thresh, 8);
 	if (!force &&
 	   (space_info->bytes_used + space_info->bytes_pinned +
 	    space_info->bytes_reserved + alloc_bytes) < thresh) {
@@ -3039,7 +3417,7 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 	 * we keep a reasonable number of metadata chunks allocated in the
 	 * FS as well.
 	 */
-	if (flags & BTRFS_BLOCK_GROUP_DATA) {
+	if (flags & BTRFS_BLOCK_GROUP_DATA && fs_info->metadata_ratio) {
 		fs_info->data_chunk_allocations++;
 		if (!(fs_info->data_chunk_allocations %
 		      fs_info->metadata_ratio))
@@ -3047,8 +3425,11 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 	}
 
 	ret = btrfs_alloc_chunk(trans, extent_root, flags);
+	spin_lock(&space_info->lock);
 	if (ret)
 		space_info->full = 1;
+	space_info->force_alloc = 0;
+	spin_unlock(&space_info->lock);
 out:
 	mutex_unlock(&extent_root->fs_info->chunk_mutex);
 	return ret;
@@ -3306,6 +3687,14 @@ static int pin_down_bytes(struct btrfs_trans_handle *trans,
 	if (is_data)
 		goto pinit;
 
+	/*
+	 * discard is sloooow, and so triggering discards on
+	 * individual btree blocks isn't a good plan.  Just
+	 * pin everything in discard mode.
+	 */
+	if (btrfs_test_opt(root, DISCARD))
+		goto pinit;
+
 	buf = btrfs_find_tree_block(root, bytenr, num_bytes);
 	if (!buf)
 		goto pinit;
@@ -3747,6 +4136,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
 	int loop = 0;
 	bool found_uncached_bg = false;
 	bool failed_cluster_refill = false;
+	bool failed_alloc = false;
 
 	WARN_ON(num_bytes < root->sectorsize);
 	btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY);
@@ -3951,14 +4341,23 @@ refill_cluster:
 
 		offset = btrfs_find_space_for_alloc(block_group, search_start,
 						    num_bytes, empty_size);
-		if (!offset && (cached || (!cached &&
-					   loop == LOOP_CACHING_NOWAIT))) {
-			goto loop;
-		} else if (!offset && (!cached &&
-				       loop > LOOP_CACHING_NOWAIT)) {
+		/*
+		 * If we didn't find a chunk, and we haven't failed on this
+		 * block group before, and this block group is in the middle of
+		 * caching and we are ok with waiting, then go ahead and wait
+		 * for progress to be made, and set failed_alloc to true.
+		 *
+		 * If failed_alloc is true then we've already waited on this
+		 * block group once and should move on to the next block group.
+		 */
+		if (!offset && !failed_alloc && !cached &&
+		    loop > LOOP_CACHING_NOWAIT) {
 			wait_block_group_cache_progress(block_group,
-					num_bytes + empty_size);
+						num_bytes + empty_size);
+			failed_alloc = true;
 			goto have_block_group;
+		} else if (!offset) {
+			goto loop;
 		}
 checks:
 		search_start = stripe_align(root, offset);
@@ -4006,6 +4405,7 @@ checks:
 		break;
 loop:
 		failed_cluster_refill = false;
+		failed_alloc = false;
 		btrfs_put_block_group(block_group);
 	}
 	up_read(&space_info->groups_sem);
@@ -4063,21 +4463,32 @@ loop:
 	return ret;
 }
 
-static void dump_space_info(struct btrfs_space_info *info, u64 bytes)
+static void dump_space_info(struct btrfs_space_info *info, u64 bytes,
+			    int dump_block_groups)
 {
 	struct btrfs_block_group_cache *cache;
 
+	spin_lock(&info->lock);
 	printk(KERN_INFO "space_info has %llu free, is %sfull\n",
 	       (unsigned long long)(info->total_bytes - info->bytes_used -
-				    info->bytes_pinned - info->bytes_reserved),
+				    info->bytes_pinned - info->bytes_reserved -
+				    info->bytes_super),
 	       (info->full) ? "" : "not ");
 	printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
-	       " may_use=%llu, used=%llu\n",
+	       " may_use=%llu, used=%llu, root=%llu, super=%llu, reserved=%llu"
+	       "\n",
 	       (unsigned long long)info->total_bytes,
 	       (unsigned long long)info->bytes_pinned,
 	       (unsigned long long)info->bytes_delalloc,
 	       (unsigned long long)info->bytes_may_use,
-	       (unsigned long long)info->bytes_used);
+	       (unsigned long long)info->bytes_used,
+	       (unsigned long long)info->bytes_root,
+	       (unsigned long long)info->bytes_super,
+	       (unsigned long long)info->bytes_reserved);
+	spin_unlock(&info->lock);
+
+	if (!dump_block_groups)
+		return;
 
 	down_read(&info->groups_sem);
 	list_for_each_entry(cache, &info->block_groups, list) {
@@ -4145,7 +4556,7 @@ again:
 		printk(KERN_ERR "btrfs allocation failed flags %llu, "
 		       "wanted %llu\n", (unsigned long long)data,
 		       (unsigned long long)num_bytes);
-		dump_space_info(sinfo, num_bytes);
+		dump_space_info(sinfo, num_bytes, 1);
 	}
 
 	return ret;
@@ -4506,6 +4917,7 @@ static noinline void reada_walk_down(struct btrfs_trans_handle *trans,
 	u64 bytenr;
 	u64 generation;
 	u64 refs;
+	u64 flags;
 	u64 last = 0;
 	u32 nritems;
 	u32 blocksize;
@@ -4543,15 +4955,19 @@ static noinline void reada_walk_down(struct btrfs_trans_handle *trans,
 		    generation <= root->root_key.offset)
 			continue;
 
+		/* We don't lock the tree block, it's OK to be racy here */
+		ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
+					       &refs, &flags);
+		BUG_ON(ret);
+		BUG_ON(refs == 0);
+
 		if (wc->stage == DROP_REFERENCE) {
-			ret = btrfs_lookup_extent_info(trans, root,
-						bytenr, blocksize,
-						&refs, NULL);
-			BUG_ON(ret);
-			BUG_ON(refs == 0);
 			if (refs == 1)
 				goto reada;
 
+			if (wc->level == 1 &&
+			    (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+				continue;
 			if (!wc->update_ref ||
 			    generation <= root->root_key.offset)
 				continue;
@@ -4560,6 +4976,10 @@ static noinline void reada_walk_down(struct btrfs_trans_handle *trans,
 						  &wc->update_progress);
 			if (ret < 0)
 				continue;
+		} else {
+			if (wc->level == 1 &&
+			    (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+				continue;
 		}
 reada:
 		ret = readahead_tree_block(root, bytenr, blocksize,
@@ -4583,7 +5003,7 @@ reada:
 static noinline int walk_down_proc(struct btrfs_trans_handle *trans,
 				   struct btrfs_root *root,
 				   struct btrfs_path *path,
-				   struct walk_control *wc)
+				   struct walk_control *wc, int lookup_info)
 {
 	int level = wc->level;
 	struct extent_buffer *eb = path->nodes[level];
@@ -4598,8 +5018,9 @@ static noinline int walk_down_proc(struct btrfs_trans_handle *trans,
 	 * when reference count of tree block is 1, it won't increase
 	 * again. once full backref flag is set, we never clear it.
 	 */
-	if ((wc->stage == DROP_REFERENCE && wc->refs[level] != 1) ||
-	    (wc->stage == UPDATE_BACKREF && !(wc->flags[level] & flag))) {
+	if (lookup_info &&
+	    ((wc->stage == DROP_REFERENCE && wc->refs[level] != 1) ||
+	     (wc->stage == UPDATE_BACKREF && !(wc->flags[level] & flag)))) {
 		BUG_ON(!path->locks[level]);
 		ret = btrfs_lookup_extent_info(trans, root,
 					       eb->start, eb->len,
@@ -4660,7 +5081,7 @@ static noinline int walk_down_proc(struct btrfs_trans_handle *trans,
 static noinline int do_walk_down(struct btrfs_trans_handle *trans,
 				 struct btrfs_root *root,
 				 struct btrfs_path *path,
-				 struct walk_control *wc)
+				 struct walk_control *wc, int *lookup_info)
 {
 	u64 bytenr;
 	u64 generation;
@@ -4680,8 +5101,10 @@ static noinline int do_walk_down(struct btrfs_trans_handle *trans,
 	 * for the subtree
 	 */
 	if (wc->stage == UPDATE_BACKREF &&
-	    generation <= root->root_key.offset)
+	    generation <= root->root_key.offset) {
+		*lookup_info = 1;
 		return 1;
+	}
 
 	bytenr = btrfs_node_blockptr(path->nodes[level], path->slots[level]);
 	blocksize = btrfs_level_size(root, level - 1);
@@ -4694,14 +5117,19 @@ static noinline int do_walk_down(struct btrfs_trans_handle *trans,
 	btrfs_tree_lock(next);
 	btrfs_set_lock_blocking(next);
 
-	if (wc->stage == DROP_REFERENCE) {
-		ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
-					       &wc->refs[level - 1],
-					       &wc->flags[level - 1]);
-		BUG_ON(ret);
-		BUG_ON(wc->refs[level - 1] == 0);
+	ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
+				       &wc->refs[level - 1],
+				       &wc->flags[level - 1]);
+	BUG_ON(ret);
+	BUG_ON(wc->refs[level - 1] == 0);
+	*lookup_info = 0;
 
+	if (wc->stage == DROP_REFERENCE) {
 		if (wc->refs[level - 1] > 1) {
+			if (level == 1 &&
+			    (wc->flags[0] & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+				goto skip;
+
 			if (!wc->update_ref ||
 			    generation <= root->root_key.offset)
 				goto skip;
@@ -4715,12 +5143,17 @@ static noinline int do_walk_down(struct btrfs_trans_handle *trans,
 			wc->stage = UPDATE_BACKREF;
 			wc->shared_level = level - 1;
 		}
+	} else {
+		if (level == 1 &&
+		    (wc->flags[0] & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+			goto skip;
 	}
 
 	if (!btrfs_buffer_uptodate(next, generation)) {
 		btrfs_tree_unlock(next);
 		free_extent_buffer(next);
 		next = NULL;
+		*lookup_info = 1;
 	}
 
 	if (!next) {
@@ -4743,21 +5176,22 @@ static noinline int do_walk_down(struct btrfs_trans_handle *trans,
 skip:
 	wc->refs[level - 1] = 0;
 	wc->flags[level - 1] = 0;
+	if (wc->stage == DROP_REFERENCE) {
+		if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF) {
+			parent = path->nodes[level]->start;
+		} else {
+			BUG_ON(root->root_key.objectid !=
+			       btrfs_header_owner(path->nodes[level]));
+			parent = 0;
+		}
 
-	if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF) {
-		parent = path->nodes[level]->start;
-	} else {
-		BUG_ON(root->root_key.objectid !=
-		       btrfs_header_owner(path->nodes[level]));
-		parent = 0;
+		ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent,
+					root->root_key.objectid, level - 1, 0);
+		BUG_ON(ret);
 	}
-
-	ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent,
-				root->root_key.objectid, level - 1, 0);
-	BUG_ON(ret);
-
 	btrfs_tree_unlock(next);
 	free_extent_buffer(next);
+	*lookup_info = 1;
 	return 1;
 }
 
@@ -4871,6 +5305,7 @@ static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
 				   struct walk_control *wc)
 {
 	int level = wc->level;
+	int lookup_info = 1;
 	int ret;
 
 	while (level >= 0) {
@@ -4878,14 +5313,14 @@ static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
 		    btrfs_header_nritems(path->nodes[level]))
 			break;
 
-		ret = walk_down_proc(trans, root, path, wc);
+		ret = walk_down_proc(trans, root, path, wc, lookup_info);
 		if (ret > 0)
 			break;
 
 		if (level == 0)
 			break;
 
-		ret = do_walk_down(trans, root, path, wc);
+		ret = do_walk_down(trans, root, path, wc, &lookup_info);
 		if (ret > 0) {
 			path->slots[level]++;
 			continue;
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 0cb88f8146ea..96577e8bf9fd 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -280,6 +280,14 @@ static struct extent_buffer *buffer_search(struct extent_io_tree *tree,
 	return NULL;
 }
 
+static void merge_cb(struct extent_io_tree *tree, struct extent_state *new,
+		     struct extent_state *other)
+{
+	if (tree->ops && tree->ops->merge_extent_hook)
+		tree->ops->merge_extent_hook(tree->mapping->host, new,
+					     other);
+}
+
 /*
  * utility function to look for merge candidates inside a given range.
  * Any extents with matching state are merged together into a single
@@ -303,6 +311,7 @@ static int merge_state(struct extent_io_tree *tree,
 		other = rb_entry(other_node, struct extent_state, rb_node);
 		if (other->end == state->start - 1 &&
 		    other->state == state->state) {
+			merge_cb(tree, state, other);
 			state->start = other->start;
 			other->tree = NULL;
 			rb_erase(&other->rb_node, &tree->state);
@@ -314,33 +323,37 @@ static int merge_state(struct extent_io_tree *tree,
 		other = rb_entry(other_node, struct extent_state, rb_node);
 		if (other->start == state->end + 1 &&
 		    other->state == state->state) {
+			merge_cb(tree, state, other);
 			other->start = state->start;
 			state->tree = NULL;
 			rb_erase(&state->rb_node, &tree->state);
 			free_extent_state(state);
+			state = NULL;
 		}
 	}
+
 	return 0;
 }
 
-static void set_state_cb(struct extent_io_tree *tree,
+static int set_state_cb(struct extent_io_tree *tree,
 			 struct extent_state *state,
 			 unsigned long bits)
 {
 	if (tree->ops && tree->ops->set_bit_hook) {
-		tree->ops->set_bit_hook(tree->mapping->host, state->start,
-					state->end, state->state, bits);
+		return tree->ops->set_bit_hook(tree->mapping->host,
+					       state->start, state->end,
+					       state->state, bits);
 	}
+
+	return 0;
 }
 
 static void clear_state_cb(struct extent_io_tree *tree,
 			   struct extent_state *state,
 			   unsigned long bits)
 {
-	if (tree->ops && tree->ops->clear_bit_hook) {
-		tree->ops->clear_bit_hook(tree->mapping->host, state->start,
-					  state->end, state->state, bits);
-	}
+	if (tree->ops && tree->ops->clear_bit_hook)
+		tree->ops->clear_bit_hook(tree->mapping->host, state, bits);
 }
 
 /*
@@ -358,6 +371,7 @@ static int insert_state(struct extent_io_tree *tree,
 			int bits)
 {
 	struct rb_node *node;
+	int ret;
 
 	if (end < start) {
 		printk(KERN_ERR "btrfs end < start %llu %llu\n",
@@ -365,11 +379,14 @@ static int insert_state(struct extent_io_tree *tree,
 		       (unsigned long long)start);
 		WARN_ON(1);
 	}
-	if (bits & EXTENT_DIRTY)
-		tree->dirty_bytes += end - start + 1;
 	state->start = start;
 	state->end = end;
-	set_state_cb(tree, state, bits);
+	ret = set_state_cb(tree, state, bits);
+	if (ret)
+		return ret;
+
+	if (bits & EXTENT_DIRTY)
+		tree->dirty_bytes += end - start + 1;
 	state->state |= bits;
 	node = tree_insert(&tree->state, end, &state->rb_node);
 	if (node) {
@@ -387,6 +404,15 @@ static int insert_state(struct extent_io_tree *tree,
 	return 0;
 }
 
+static int split_cb(struct extent_io_tree *tree, struct extent_state *orig,
+		     u64 split)
+{
+	if (tree->ops && tree->ops->split_extent_hook)
+		return tree->ops->split_extent_hook(tree->mapping->host,
+						    orig, split);
+	return 0;
+}
+
 /*
  * split a given extent state struct in two, inserting the preallocated
  * struct 'prealloc' as the newly created second half.  'split' indicates an
@@ -405,6 +431,9 @@ static int split_state(struct extent_io_tree *tree, struct extent_state *orig,
 		       struct extent_state *prealloc, u64 split)
 {
 	struct rb_node *node;
+
+	split_cb(tree, orig, split);
+
 	prealloc->start = orig->start;
 	prealloc->end = split - 1;
 	prealloc->state = orig->state;
@@ -431,7 +460,8 @@ static int clear_state_bit(struct extent_io_tree *tree,
 			    struct extent_state *state, int bits, int wake,
 			    int delete)
 {
-	int ret = state->state & bits;
+	int bits_to_clear = bits & ~EXTENT_DO_ACCOUNTING;
+	int ret = state->state & bits_to_clear;
 
 	if ((bits & EXTENT_DIRTY) && (state->state & EXTENT_DIRTY)) {
 		u64 range = state->end - state->start + 1;
@@ -439,7 +469,7 @@ static int clear_state_bit(struct extent_io_tree *tree,
 		tree->dirty_bytes -= range;
 	}
 	clear_state_cb(tree, state, bits);
-	state->state &= ~bits;
+	state->state &= ~bits_to_clear;
 	if (wake)
 		wake_up(&state->wq);
 	if (delete || state->state == 0) {
@@ -542,8 +572,8 @@ hit_next:
 		if (err)
 			goto out;
 		if (state->end <= end) {
-			set |= clear_state_bit(tree, state, bits,
-					wake, delete);
+			set |= clear_state_bit(tree, state, bits, wake,
+					       delete);
 			if (last_end == (u64)-1)
 				goto out;
 			start = last_end + 1;
@@ -561,12 +591,11 @@ hit_next:
 			prealloc = alloc_extent_state(GFP_ATOMIC);
 		err = split_state(tree, state, prealloc, end + 1);
 		BUG_ON(err == -EEXIST);
-
 		if (wake)
 			wake_up(&state->wq);
 
-		set |= clear_state_bit(tree, prealloc, bits,
-				       wake, delete);
+		set |= clear_state_bit(tree, prealloc, bits, wake, delete);
+
 		prealloc = NULL;
 		goto out;
 	}
@@ -667,16 +696,23 @@ out:
 	return 0;
 }
 
-static void set_state_bits(struct extent_io_tree *tree,
+static int set_state_bits(struct extent_io_tree *tree,
 			   struct extent_state *state,
 			   int bits)
 {
+	int ret;
+
+	ret = set_state_cb(tree, state, bits);
+	if (ret)
+		return ret;
+
 	if ((bits & EXTENT_DIRTY) && !(state->state & EXTENT_DIRTY)) {
 		u64 range = state->end - state->start + 1;
 		tree->dirty_bytes += range;
 	}
-	set_state_cb(tree, state, bits);
 	state->state |= bits;
+
+	return 0;
 }
 
 static void cache_state(struct extent_state *state,
@@ -758,7 +794,10 @@ hit_next:
 			goto out;
 		}
 
-		set_state_bits(tree, state, bits);
+		err = set_state_bits(tree, state, bits);
+		if (err)
+			goto out;
+
 		cache_state(state, cached_state);
 		merge_state(tree, state);
 		if (last_end == (u64)-1)
@@ -805,7 +844,9 @@ hit_next:
 		if (err)
 			goto out;
 		if (state->end <= end) {
-			set_state_bits(tree, state, bits);
+			err = set_state_bits(tree, state, bits);
+			if (err)
+				goto out;
 			cache_state(state, cached_state);
 			merge_state(tree, state);
 			if (last_end == (u64)-1)
@@ -829,11 +870,13 @@ hit_next:
 			this_end = last_start - 1;
 		err = insert_state(tree, prealloc, start, this_end,
 				   bits);
-		cache_state(prealloc, cached_state);
-		prealloc = NULL;
 		BUG_ON(err == -EEXIST);
-		if (err)
+		if (err) {
+			prealloc = NULL;
 			goto out;
+		}
+		cache_state(prealloc, cached_state);
+		prealloc = NULL;
 		start = this_end + 1;
 		goto search_again;
 	}
@@ -852,7 +895,11 @@ hit_next:
 		err = split_state(tree, state, prealloc, end + 1);
 		BUG_ON(err == -EEXIST);
 
-		set_state_bits(tree, prealloc, bits);
+		err = set_state_bits(tree, prealloc, bits);
+		if (err) {
+			prealloc = NULL;
+			goto out;
+		}
 		cache_state(prealloc, cached_state);
 		merge_state(tree, prealloc);
 		prealloc = NULL;
@@ -910,7 +957,8 @@ int clear_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
 		       gfp_t mask)
 {
 	return clear_extent_bit(tree, start, end,
-				EXTENT_DIRTY | EXTENT_DELALLOC, 0, 0,
+				EXTENT_DIRTY | EXTENT_DELALLOC |
+				EXTENT_DO_ACCOUNTING, 0, 0,
 				NULL, mask);
 }
 
@@ -1355,12 +1403,7 @@ out_failed:
 int extent_clear_unlock_delalloc(struct inode *inode,
 				struct extent_io_tree *tree,
 				u64 start, u64 end, struct page *locked_page,
-				int unlock_pages,
-				int clear_unlock,
-				int clear_delalloc, int clear_dirty,
-				int set_writeback,
-				int end_writeback,
-				int set_private2)
+				unsigned long op)
 {
 	int ret;
 	struct page *pages[16];
@@ -1370,17 +1413,21 @@ int extent_clear_unlock_delalloc(struct inode *inode,
 	int i;
 	int clear_bits = 0;
 
-	if (clear_unlock)
+	if (op & EXTENT_CLEAR_UNLOCK)
 		clear_bits |= EXTENT_LOCKED;
-	if (clear_dirty)
+	if (op & EXTENT_CLEAR_DIRTY)
 		clear_bits |= EXTENT_DIRTY;
 
-	if (clear_delalloc)
+	if (op & EXTENT_CLEAR_DELALLOC)
 		clear_bits |= EXTENT_DELALLOC;
 
+	if (op & EXTENT_CLEAR_ACCOUNTING)
+		clear_bits |= EXTENT_DO_ACCOUNTING;
+
 	clear_extent_bit(tree, start, end, clear_bits, 1, 0, NULL, GFP_NOFS);
-	if (!(unlock_pages || clear_dirty || set_writeback || end_writeback ||
-	      set_private2))
+	if (!(op & (EXTENT_CLEAR_UNLOCK_PAGE | EXTENT_CLEAR_DIRTY |
+		    EXTENT_SET_WRITEBACK | EXTENT_END_WRITEBACK |
+		    EXTENT_SET_PRIVATE2)))
 		return 0;
 
 	while (nr_pages > 0) {
@@ -1389,20 +1436,20 @@ int extent_clear_unlock_delalloc(struct inode *inode,
 				     nr_pages, ARRAY_SIZE(pages)), pages);
 		for (i = 0; i < ret; i++) {
 
-			if (set_private2)
+			if (op & EXTENT_SET_PRIVATE2)
 				SetPagePrivate2(pages[i]);
 
 			if (pages[i] == locked_page) {
 				page_cache_release(pages[i]);
 				continue;
 			}
-			if (clear_dirty)
+			if (op & EXTENT_CLEAR_DIRTY)
 				clear_page_dirty_for_io(pages[i]);
-			if (set_writeback)
+			if (op & EXTENT_SET_WRITEBACK)
 				set_page_writeback(pages[i]);
-			if (end_writeback)
+			if (op & EXTENT_END_WRITEBACK)
 				end_page_writeback(pages[i]);
-			if (unlock_pages)
+			if (op & EXTENT_CLEAR_UNLOCK_PAGE)
 				unlock_page(pages[i]);
 			page_cache_release(pages[i]);
 		}
@@ -2668,7 +2715,8 @@ int extent_invalidatepage(struct extent_io_tree *tree,
 	lock_extent(tree, start, end, GFP_NOFS);
 	wait_on_page_writeback(page);
 	clear_extent_bit(tree, start, end,
-			 EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC,
+			 EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC |
+			 EXTENT_DO_ACCOUNTING,
 			 1, 1, NULL, GFP_NOFS);
 	return 0;
 }
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 14ed16fd862d..36de250a7b2b 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -15,6 +15,7 @@
 #define EXTENT_BUFFER_FILLED (1 << 8)
 #define EXTENT_BOUNDARY (1 << 9)
 #define EXTENT_NODATASUM (1 << 10)
+#define EXTENT_DO_ACCOUNTING (1 << 11)
 #define EXTENT_IOBITS (EXTENT_LOCKED | EXTENT_WRITEBACK)
 
 /* flags for bio submission */
@@ -25,6 +26,16 @@
 #define EXTENT_BUFFER_BLOCKING 1
 #define EXTENT_BUFFER_DIRTY 2
 
+/* these are flags for extent_clear_unlock_delalloc */
+#define EXTENT_CLEAR_UNLOCK_PAGE 0x1
+#define EXTENT_CLEAR_UNLOCK	 0x2
+#define EXTENT_CLEAR_DELALLOC	 0x4
+#define EXTENT_CLEAR_DIRTY	 0x8
+#define EXTENT_SET_WRITEBACK	 0x10
+#define EXTENT_END_WRITEBACK	 0x20
+#define EXTENT_SET_PRIVATE2	 0x40
+#define EXTENT_CLEAR_ACCOUNTING  0x80
+
 /*
  * page->private values.  Every page that is controlled by the extent
  * map has page->private set to one.
@@ -60,8 +71,13 @@ struct extent_io_ops {
 				      struct extent_state *state, int uptodate);
 	int (*set_bit_hook)(struct inode *inode, u64 start, u64 end,
 			    unsigned long old, unsigned long bits);
-	int (*clear_bit_hook)(struct inode *inode, u64 start, u64 end,
-			    unsigned long old, unsigned long bits);
+	int (*clear_bit_hook)(struct inode *inode, struct extent_state *state,
+			      unsigned long bits);
+	int (*merge_extent_hook)(struct inode *inode,
+				 struct extent_state *new,
+				 struct extent_state *other);
+	int (*split_extent_hook)(struct inode *inode,
+				 struct extent_state *orig, u64 split);
 	int (*write_cache_pages_lock_hook)(struct page *page);
 };
 
@@ -79,10 +95,14 @@ struct extent_state {
 	u64 start;
 	u64 end; /* inclusive */
 	struct rb_node rb_node;
+
+	/* ADD NEW ELEMENTS AFTER THIS */
 	struct extent_io_tree *tree;
 	wait_queue_head_t wq;
 	atomic_t refs;
 	unsigned long state;
+	u64 split_start;
+	u64 split_end;
 
 	/* for use by the FS */
 	u64 private;
@@ -279,10 +299,5 @@ int extent_range_uptodate(struct extent_io_tree *tree,
 int extent_clear_unlock_delalloc(struct inode *inode,
 				struct extent_io_tree *tree,
 				u64 start, u64 end, struct page *locked_page,
-				int unlock_page,
-				int clear_unlock,
-				int clear_delalloc, int clear_dirty,
-				int set_writeback,
-				int end_writeback,
-				int set_private2);
+				unsigned long op);
 #endif
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index a3492a3ad96b..06550affbd27 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -123,7 +123,10 @@ static noinline int dirty_and_release_pages(struct btrfs_trans_handle *trans,
 		    root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
 
 	end_of_last_block = start_pos + num_bytes - 1;
-	btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block);
+	err = btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block);
+	if (err)
+		return err;
+
 	for (i = 0; i < num_pages; i++) {
 		struct page *p = pages[i];
 		SetPageUptodate(p);
@@ -875,7 +878,8 @@ again:
 			btrfs_put_ordered_extent(ordered);
 
 		clear_extent_bits(&BTRFS_I(inode)->io_tree, start_pos,
-				  last_pos - 1, EXTENT_DIRTY | EXTENT_DELALLOC,
+				  last_pos - 1, EXTENT_DIRTY | EXTENT_DELALLOC |
+				  EXTENT_DO_ACCOUNTING,
 				  GFP_NOFS);
 		unlock_extent(&BTRFS_I(inode)->io_tree,
 			      start_pos, last_pos - 1, GFP_NOFS);
@@ -917,21 +921,35 @@ static ssize_t btrfs_file_write(struct file *file, const char __user *buf,
 	start_pos = pos;
 
 	vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
+
+	/* do the reserve before the mutex lock in case we have to do some
+	 * flushing.  We wouldn't deadlock, but this is more polite.
+	 */
+	err = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+	if (err)
+		goto out_nolock;
+
+	mutex_lock(&inode->i_mutex);
+
 	current->backing_dev_info = inode->i_mapping->backing_dev_info;
 	err = generic_write_checks(file, &pos, &count, S_ISBLK(inode->i_mode));
 	if (err)
-		goto out_nolock;
+		goto out;
+
 	if (count == 0)
-		goto out_nolock;
+		goto out;
 
 	err = file_remove_suid(file);
 	if (err)
-		goto out_nolock;
+		goto out;
+
 	file_update_time(file);
 
 	pages = kmalloc(nrptrs * sizeof(struct page *), GFP_KERNEL);
 
-	mutex_lock(&inode->i_mutex);
+	/* generic_write_checks can change our pos */
+	start_pos = pos;
+
 	BTRFS_I(inode)->sequence++;
 	first_index = pos >> PAGE_CACHE_SHIFT;
 	last_index = (pos + count) >> PAGE_CACHE_SHIFT;
@@ -1005,9 +1023,8 @@ static ssize_t btrfs_file_write(struct file *file, const char __user *buf,
 		}
 
 		if (will_write) {
-			btrfs_fdatawrite_range(inode->i_mapping, pos,
-					       pos + write_bytes - 1,
-					       WB_SYNC_ALL);
+			filemap_fdatawrite_range(inode->i_mapping, pos,
+						 pos + write_bytes - 1);
 		} else {
 			balance_dirty_pages_ratelimited_nr(inode->i_mapping,
 							   num_pages);
@@ -1028,6 +1045,7 @@ out:
 	mutex_unlock(&inode->i_mutex);
 	if (ret)
 		err = ret;
+	btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
 
 out_nolock:
 	kfree(pages);
@@ -1068,8 +1086,10 @@ out_nolock:
 					btrfs_end_transaction(trans, root);
 				else
 					btrfs_commit_transaction(trans, root);
-			} else {
+			} else if (ret != BTRFS_NO_LOG_SYNC) {
 				btrfs_commit_transaction(trans, root);
+			} else {
+				btrfs_end_transaction(trans, root);
 			}
 		}
 		if (file->f_flags & O_DIRECT) {
@@ -1119,6 +1139,13 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync)
 	int ret = 0;
 	struct btrfs_trans_handle *trans;
 
+
+	/* we wait first, since the writeback may change the inode */
+	root->log_batch++;
+	/* the VFS called filemap_fdatawrite for us */
+	btrfs_wait_ordered_range(inode, 0, (u64)-1);
+	root->log_batch++;
+
 	/*
 	 * check the transaction that last modified this inode
 	 * and see if its already been committed
@@ -1126,6 +1153,11 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync)
 	if (!BTRFS_I(inode)->last_trans)
 		goto out;
 
+	/*
+	 * if the last transaction that changed this file was before
+	 * the current transaction, we can bail out now without any
+	 * syncing
+	 */
 	mutex_lock(&root->fs_info->trans_mutex);
 	if (BTRFS_I(inode)->last_trans <=
 	    root->fs_info->last_trans_committed) {
@@ -1135,13 +1167,6 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync)
 	}
 	mutex_unlock(&root->fs_info->trans_mutex);
 
-	root->log_batch++;
-	filemap_fdatawrite(inode->i_mapping);
-	btrfs_wait_ordered_range(inode, 0, (u64)-1);
-	root->log_batch++;
-
-	if (datasync && !(inode->i_state & I_DIRTY_PAGES))
-		goto out;
 	/*
 	 * ok we haven't committed the transaction yet, lets do a commit
 	 */
@@ -1170,14 +1195,18 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync)
 	 */
 	mutex_unlock(&dentry->d_inode->i_mutex);
 
-	if (ret > 0) {
-		ret = btrfs_commit_transaction(trans, root);
-	} else {
-		ret = btrfs_sync_log(trans, root);
-		if (ret == 0)
-			ret = btrfs_end_transaction(trans, root);
-		else
+	if (ret != BTRFS_NO_LOG_SYNC) {
+		if (ret > 0) {
 			ret = btrfs_commit_transaction(trans, root);
+		} else {
+			ret = btrfs_sync_log(trans, root);
+			if (ret == 0)
+				ret = btrfs_end_transaction(trans, root);
+			else
+				ret = btrfs_commit_transaction(trans, root);
+		}
+	} else {
+		ret = btrfs_end_transaction(trans, root);
 	}
 	mutex_lock(&dentry->d_inode->i_mutex);
 out:
@@ -1196,7 +1225,7 @@ static int btrfs_file_mmap(struct file	*filp, struct vm_area_struct *vma)
 	return 0;
 }
 
-struct file_operations btrfs_file_operations = {
+const struct file_operations btrfs_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
 	.aio_read       = generic_file_aio_read,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index e9b76bcd1c12..dae12dc7e159 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -62,7 +62,7 @@ static const struct inode_operations btrfs_special_inode_operations;
 static const struct inode_operations btrfs_file_inode_operations;
 static const struct address_space_operations btrfs_aops;
 static const struct address_space_operations btrfs_symlink_aops;
-static struct file_operations btrfs_dir_file_operations;
+static const struct file_operations btrfs_dir_file_operations;
 static struct extent_io_ops btrfs_extent_io_ops;
 
 static struct kmem_cache *btrfs_inode_cachep;
@@ -424,9 +424,12 @@ again:
 			 * and free up our temp pages.
 			 */
 			extent_clear_unlock_delalloc(inode,
-						     &BTRFS_I(inode)->io_tree,
-						     start, end, NULL, 1, 0,
-						     0, 1, 1, 1, 0);
+			     &BTRFS_I(inode)->io_tree,
+			     start, end, NULL,
+			     EXTENT_CLEAR_UNLOCK_PAGE | EXTENT_CLEAR_DIRTY |
+			     EXTENT_CLEAR_DELALLOC |
+			     EXTENT_CLEAR_ACCOUNTING |
+			     EXTENT_SET_WRITEBACK | EXTENT_END_WRITEBACK);
 			ret = 0;
 			goto free_pages_out;
 		}
@@ -637,11 +640,14 @@ static noinline int submit_compressed_extents(struct inode *inode,
 		 * clear dirty, set writeback and unlock the pages.
 		 */
 		extent_clear_unlock_delalloc(inode,
-					     &BTRFS_I(inode)->io_tree,
-					     async_extent->start,
-					     async_extent->start +
-					     async_extent->ram_size - 1,
-					     NULL, 1, 1, 0, 1, 1, 0, 0);
+				&BTRFS_I(inode)->io_tree,
+				async_extent->start,
+				async_extent->start +
+				async_extent->ram_size - 1,
+				NULL, EXTENT_CLEAR_UNLOCK_PAGE |
+				EXTENT_CLEAR_UNLOCK |
+				EXTENT_CLEAR_DELALLOC |
+				EXTENT_CLEAR_DIRTY | EXTENT_SET_WRITEBACK);
 
 		ret = btrfs_submit_compressed_write(inode,
 				    async_extent->start,
@@ -712,9 +718,15 @@ static noinline int cow_file_range(struct inode *inode,
 					    start, end, 0, NULL);
 		if (ret == 0) {
 			extent_clear_unlock_delalloc(inode,
-						     &BTRFS_I(inode)->io_tree,
-						     start, end, NULL, 1, 1,
-						     1, 1, 1, 1, 0);
+				     &BTRFS_I(inode)->io_tree,
+				     start, end, NULL,
+				     EXTENT_CLEAR_UNLOCK_PAGE |
+				     EXTENT_CLEAR_UNLOCK |
+				     EXTENT_CLEAR_DELALLOC |
+				     EXTENT_CLEAR_ACCOUNTING |
+				     EXTENT_CLEAR_DIRTY |
+				     EXTENT_SET_WRITEBACK |
+				     EXTENT_END_WRITEBACK);
 			*nr_written = *nr_written +
 			     (end - start + PAGE_CACHE_SIZE) / PAGE_CACHE_SIZE;
 			*page_started = 1;
@@ -738,6 +750,8 @@ static noinline int cow_file_range(struct inode *inode,
 	btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0);
 
 	while (disk_num_bytes > 0) {
+		unsigned long op;
+
 		cur_alloc_size = min(disk_num_bytes, root->fs_info->max_extent);
 		ret = btrfs_reserve_extent(trans, root, cur_alloc_size,
 					   root->sectorsize, 0, alloc_hint,
@@ -789,10 +803,13 @@ static noinline int cow_file_range(struct inode *inode,
 		 * Do set the Private2 bit so we know this page was properly
 		 * setup for writepage
 		 */
+		op = unlock ? EXTENT_CLEAR_UNLOCK_PAGE : 0;
+		op |= EXTENT_CLEAR_UNLOCK | EXTENT_CLEAR_DELALLOC |
+			EXTENT_SET_PRIVATE2;
+
 		extent_clear_unlock_delalloc(inode, &BTRFS_I(inode)->io_tree,
 					     start, start + ram_size - 1,
-					     locked_page, unlock, 1,
-					     1, 0, 0, 0, 1);
+					     locked_page, op);
 		disk_num_bytes -= cur_alloc_size;
 		num_bytes -= cur_alloc_size;
 		alloc_hint = ins.objectid + ins.offset;
@@ -864,8 +881,8 @@ static int cow_file_range_async(struct inode *inode, struct page *locked_page,
 	u64 cur_end;
 	int limit = 10 * 1024 * 1042;
 
-	clear_extent_bit(&BTRFS_I(inode)->io_tree, start, end, EXTENT_LOCKED |
-			 EXTENT_DELALLOC, 1, 0, NULL, GFP_NOFS);
+	clear_extent_bit(&BTRFS_I(inode)->io_tree, start, end, EXTENT_LOCKED,
+			 1, 0, NULL, GFP_NOFS);
 	while (start < end) {
 		async_cow = kmalloc(sizeof(*async_cow), GFP_NOFS);
 		async_cow->inode = inode;
@@ -1006,6 +1023,7 @@ next_slot:
 
 		if (found_key.offset > cur_offset) {
 			extent_end = found_key.offset;
+			extent_type = 0;
 			goto out_check;
 		}
 
@@ -1112,8 +1130,10 @@ out_check:
 		BUG_ON(ret);
 
 		extent_clear_unlock_delalloc(inode, &BTRFS_I(inode)->io_tree,
-					cur_offset, cur_offset + num_bytes - 1,
-					locked_page, 1, 1, 1, 0, 0, 0, 1);
+				cur_offset, cur_offset + num_bytes - 1,
+				locked_page, EXTENT_CLEAR_UNLOCK_PAGE |
+				EXTENT_CLEAR_UNLOCK | EXTENT_CLEAR_DELALLOC |
+				EXTENT_SET_PRIVATE2);
 		cur_offset = extent_end;
 		if (cur_offset > end)
 			break;
@@ -1159,6 +1179,89 @@ static int run_delalloc_range(struct inode *inode, struct page *locked_page,
 	return ret;
 }
 
+static int btrfs_split_extent_hook(struct inode *inode,
+				    struct extent_state *orig, u64 split)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	u64 size;
+
+	if (!(orig->state & EXTENT_DELALLOC))
+		return 0;
+
+	size = orig->end - orig->start + 1;
+	if (size > root->fs_info->max_extent) {
+		u64 num_extents;
+		u64 new_size;
+
+		new_size = orig->end - split + 1;
+		num_extents = div64_u64(size + root->fs_info->max_extent - 1,
+					root->fs_info->max_extent);
+
+		/*
+		 * if we break a large extent up then leave oustanding_extents
+		 * be, since we've already accounted for the large extent.
+		 */
+		if (div64_u64(new_size + root->fs_info->max_extent - 1,
+			      root->fs_info->max_extent) < num_extents)
+			return 0;
+	}
+
+	spin_lock(&BTRFS_I(inode)->accounting_lock);
+	BTRFS_I(inode)->outstanding_extents++;
+	spin_unlock(&BTRFS_I(inode)->accounting_lock);
+
+	return 0;
+}
+
+/*
+ * extent_io.c merge_extent_hook, used to track merged delayed allocation
+ * extents so we can keep track of new extents that are just merged onto old
+ * extents, such as when we are doing sequential writes, so we can properly
+ * account for the metadata space we'll need.
+ */
+static int btrfs_merge_extent_hook(struct inode *inode,
+				   struct extent_state *new,
+				   struct extent_state *other)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	u64 new_size, old_size;
+	u64 num_extents;
+
+	/* not delalloc, ignore it */
+	if (!(other->state & EXTENT_DELALLOC))
+		return 0;
+
+	old_size = other->end - other->start + 1;
+	if (new->start < other->start)
+		new_size = other->end - new->start + 1;
+	else
+		new_size = new->end - other->start + 1;
+
+	/* we're not bigger than the max, unreserve the space and go */
+	if (new_size <= root->fs_info->max_extent) {
+		spin_lock(&BTRFS_I(inode)->accounting_lock);
+		BTRFS_I(inode)->outstanding_extents--;
+		spin_unlock(&BTRFS_I(inode)->accounting_lock);
+		return 0;
+	}
+
+	/*
+	 * If we grew by another max_extent, just return, we want to keep that
+	 * reserved amount.
+	 */
+	num_extents = div64_u64(old_size + root->fs_info->max_extent - 1,
+				root->fs_info->max_extent);
+	if (div64_u64(new_size + root->fs_info->max_extent - 1,
+		      root->fs_info->max_extent) > num_extents)
+		return 0;
+
+	spin_lock(&BTRFS_I(inode)->accounting_lock);
+	BTRFS_I(inode)->outstanding_extents--;
+	spin_unlock(&BTRFS_I(inode)->accounting_lock);
+
+	return 0;
+}
+
 /*
  * extent_io.c set_bit_hook, used to track delayed allocation
  * bytes in this file, and to maintain the list of inodes that
@@ -1167,6 +1270,7 @@ static int run_delalloc_range(struct inode *inode, struct page *locked_page,
 static int btrfs_set_bit_hook(struct inode *inode, u64 start, u64 end,
 		       unsigned long old, unsigned long bits)
 {
+
 	/*
 	 * set_bit and clear bit hooks normally require _irqsave/restore
 	 * but in this case, we are only testeing for the DELALLOC
@@ -1174,6 +1278,10 @@ static int btrfs_set_bit_hook(struct inode *inode, u64 start, u64 end,
 	 */
 	if (!(old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
 		struct btrfs_root *root = BTRFS_I(inode)->root;
+
+		spin_lock(&BTRFS_I(inode)->accounting_lock);
+		BTRFS_I(inode)->outstanding_extents++;
+		spin_unlock(&BTRFS_I(inode)->accounting_lock);
 		btrfs_delalloc_reserve_space(root, inode, end - start + 1);
 		spin_lock(&root->fs_info->delalloc_lock);
 		BTRFS_I(inode)->delalloc_bytes += end - start + 1;
@@ -1190,22 +1298,31 @@ static int btrfs_set_bit_hook(struct inode *inode, u64 start, u64 end,
 /*
  * extent_io.c clear_bit_hook, see set_bit_hook for why
  */
-static int btrfs_clear_bit_hook(struct inode *inode, u64 start, u64 end,
-			 unsigned long old, unsigned long bits)
+static int btrfs_clear_bit_hook(struct inode *inode,
+				struct extent_state *state, unsigned long bits)
 {
 	/*
 	 * set_bit and clear bit hooks normally require _irqsave/restore
 	 * but in this case, we are only testeing for the DELALLOC
 	 * bit, which is only set or cleared with irqs on
 	 */
-	if ((old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
+	if ((state->state & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
 		struct btrfs_root *root = BTRFS_I(inode)->root;
 
+		if (bits & EXTENT_DO_ACCOUNTING) {
+			spin_lock(&BTRFS_I(inode)->accounting_lock);
+			BTRFS_I(inode)->outstanding_extents--;
+			spin_unlock(&BTRFS_I(inode)->accounting_lock);
+			btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
+		}
+
 		spin_lock(&root->fs_info->delalloc_lock);
-		if (end - start + 1 > root->fs_info->delalloc_bytes) {
+		if (state->end - state->start + 1 >
+		    root->fs_info->delalloc_bytes) {
 			printk(KERN_INFO "btrfs warning: delalloc account "
 			       "%llu %llu\n",
-			       (unsigned long long)end - start + 1,
+			       (unsigned long long)
+			       state->end - state->start + 1,
 			       (unsigned long long)
 			       root->fs_info->delalloc_bytes);
 			btrfs_delalloc_free_space(root, inode, (u64)-1);
@@ -1213,9 +1330,12 @@ static int btrfs_clear_bit_hook(struct inode *inode, u64 start, u64 end,
 			BTRFS_I(inode)->delalloc_bytes = 0;
 		} else {
 			btrfs_delalloc_free_space(root, inode,
-						  end - start + 1);
-			root->fs_info->delalloc_bytes -= end - start + 1;
-			BTRFS_I(inode)->delalloc_bytes -= end - start + 1;
+						  state->end -
+						  state->start + 1);
+			root->fs_info->delalloc_bytes -= state->end -
+				state->start + 1;
+			BTRFS_I(inode)->delalloc_bytes -= state->end -
+				state->start + 1;
 		}
 		if (BTRFS_I(inode)->delalloc_bytes == 0 &&
 		    !list_empty(&BTRFS_I(inode)->delalloc_inodes)) {
@@ -2912,12 +3032,22 @@ static int btrfs_truncate_page(struct address_space *mapping, loff_t from)
 
 	if ((offset & (blocksize - 1)) == 0)
 		goto out;
+	ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
+	if (ret)
+		goto out;
+
+	ret = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+	if (ret)
+		goto out;
 
 	ret = -ENOMEM;
 again:
 	page = grab_cache_page(mapping, index);
-	if (!page)
+	if (!page) {
+		btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+		btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
 		goto out;
+	}
 
 	page_start = page_offset(page);
 	page_end = page_start + PAGE_CACHE_SIZE - 1;
@@ -2950,7 +3080,16 @@ again:
 		goto again;
 	}
 
-	btrfs_set_extent_delalloc(inode, page_start, page_end);
+	clear_extent_bits(&BTRFS_I(inode)->io_tree, page_start, page_end,
+			  EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING,
+			  GFP_NOFS);
+
+	ret = btrfs_set_extent_delalloc(inode, page_start, page_end);
+	if (ret) {
+		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		goto out_unlock;
+	}
+
 	ret = 0;
 	if (offset != PAGE_CACHE_SIZE) {
 		kaddr = kmap(page);
@@ -2963,6 +3102,9 @@ again:
 	unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
 
 out_unlock:
+	if (ret)
+		btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+	btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
 	unlock_page(page);
 	page_cache_release(page);
 out:
@@ -2981,17 +3123,15 @@ int btrfs_cont_expand(struct inode *inode, loff_t size)
 	u64 last_byte;
 	u64 cur_offset;
 	u64 hole_size;
-	int err;
+	int err = 0;
 
 	if (size <= hole_start)
 		return 0;
 
-	err = btrfs_check_metadata_free_space(root);
+	err = btrfs_truncate_page(inode->i_mapping, inode->i_size);
 	if (err)
 		return err;
 
-	btrfs_truncate_page(inode->i_mapping, inode->i_size);
-
 	while (1) {
 		struct btrfs_ordered_extent *ordered;
 		btrfs_wait_ordered_range(inode, hole_start,
@@ -3024,12 +3164,18 @@ int btrfs_cont_expand(struct inode *inode, loff_t size)
 						 cur_offset, &hint_byte, 1);
 			if (err)
 				break;
+
+			err = btrfs_reserve_metadata_space(root, 1);
+			if (err)
+				break;
+
 			err = btrfs_insert_file_extent(trans, root,
 					inode->i_ino, cur_offset, 0,
 					0, hole_size, 0, hole_size,
 					0, 0, 0);
 			btrfs_drop_extent_cache(inode, hole_start,
 					last_byte - 1, 0);
+			btrfs_unreserve_metadata_space(root, 1);
 		}
 		free_extent_map(em);
 		cur_offset = last_byte;
@@ -3353,6 +3499,7 @@ static noinline void init_btrfs_i(struct inode *inode)
 	bi->generation = 0;
 	bi->sequence = 0;
 	bi->last_trans = 0;
+	bi->last_sub_trans = 0;
 	bi->logged_trans = 0;
 	bi->delalloc_bytes = 0;
 	bi->reserved_bytes = 0;
@@ -3503,12 +3650,14 @@ static int btrfs_dentry_delete(struct dentry *dentry)
 {
 	struct btrfs_root *root;
 
-	if (!dentry->d_inode)
-		return 0;
+	if (!dentry->d_inode && !IS_ROOT(dentry))
+		dentry = dentry->d_parent;
 
-	root = BTRFS_I(dentry->d_inode)->root;
-	if (btrfs_root_refs(&root->root_item) == 0)
-		return 1;
+	if (dentry->d_inode) {
+		root = BTRFS_I(dentry->d_inode)->root;
+		if (btrfs_root_refs(&root->root_item) == 0)
+			return 1;
+	}
 	return 0;
 }
 
@@ -3990,11 +4139,18 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry,
 	if (!new_valid_dev(rdev))
 		return -EINVAL;
 
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 for inode item and ref
+	 * 2 for dir items
+	 * 1 for xattr if selinux is on
+	 */
+	err = btrfs_reserve_metadata_space(root, 5);
 	if (err)
-		goto fail;
+		return err;
 
 	trans = btrfs_start_transaction(root, 1);
+	if (!trans)
+		goto fail;
 	btrfs_set_trans_block_group(trans, dir);
 
 	err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
@@ -4032,6 +4188,7 @@ out_unlock:
 	nr = trans->blocks_used;
 	btrfs_end_transaction_throttle(trans, root);
 fail:
+	btrfs_unreserve_metadata_space(root, 5);
 	if (drop_inode) {
 		inode_dec_link_count(inode);
 		iput(inode);
@@ -4052,10 +4209,18 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry,
 	u64 objectid;
 	u64 index = 0;
 
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 for inode item and ref
+	 * 2 for dir items
+	 * 1 for xattr if selinux is on
+	 */
+	err = btrfs_reserve_metadata_space(root, 5);
 	if (err)
-		goto fail;
+		return err;
+
 	trans = btrfs_start_transaction(root, 1);
+	if (!trans)
+		goto fail;
 	btrfs_set_trans_block_group(trans, dir);
 
 	err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
@@ -4096,6 +4261,7 @@ out_unlock:
 	nr = trans->blocks_used;
 	btrfs_end_transaction_throttle(trans, root);
 fail:
+	btrfs_unreserve_metadata_space(root, 5);
 	if (drop_inode) {
 		inode_dec_link_count(inode);
 		iput(inode);
@@ -4118,10 +4284,16 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 	if (inode->i_nlink == 0)
 		return -ENOENT;
 
-	btrfs_inc_nlink(inode);
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 1 item for inode ref
+	 * 2 items for dir items
+	 */
+	err = btrfs_reserve_metadata_space(root, 3);
 	if (err)
-		goto fail;
+		return err;
+
+	btrfs_inc_nlink(inode);
+
 	err = btrfs_set_inode_index(dir, &index);
 	if (err)
 		goto fail;
@@ -4145,6 +4317,7 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 	nr = trans->blocks_used;
 	btrfs_end_transaction_throttle(trans, root);
 fail:
+	btrfs_unreserve_metadata_space(root, 3);
 	if (drop_inode) {
 		inode_dec_link_count(inode);
 		iput(inode);
@@ -4164,17 +4337,21 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	u64 index = 0;
 	unsigned long nr = 1;
 
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 items for inode and ref
+	 * 2 items for dir items
+	 * 1 for xattr if selinux is on
+	 */
+	err = btrfs_reserve_metadata_space(root, 5);
 	if (err)
-		goto out_unlock;
+		return err;
 
 	trans = btrfs_start_transaction(root, 1);
-	btrfs_set_trans_block_group(trans, dir);
-
-	if (IS_ERR(trans)) {
-		err = PTR_ERR(trans);
+	if (!trans) {
+		err = -ENOMEM;
 		goto out_unlock;
 	}
+	btrfs_set_trans_block_group(trans, dir);
 
 	err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
 	if (err) {
@@ -4223,6 +4400,7 @@ out_fail:
 	btrfs_end_transaction_throttle(trans, root);
 
 out_unlock:
+	btrfs_unreserve_metadata_space(root, 5);
 	if (drop_on_err)
 		iput(inode);
 	btrfs_btree_balance_dirty(root, nr);
@@ -4684,7 +4862,8 @@ static void btrfs_invalidatepage(struct page *page, unsigned long offset)
 		 */
 		clear_extent_bit(tree, page_start, page_end,
 				 EXTENT_DIRTY | EXTENT_DELALLOC |
-				 EXTENT_LOCKED, 1, 0, NULL, GFP_NOFS);
+				 EXTENT_LOCKED | EXTENT_DO_ACCOUNTING, 1, 0,
+				 NULL, GFP_NOFS);
 		/*
 		 * whoever cleared the private bit is responsible
 		 * for the finish_ordered_io
@@ -4697,8 +4876,8 @@ static void btrfs_invalidatepage(struct page *page, unsigned long offset)
 		lock_extent(tree, page_start, page_end, GFP_NOFS);
 	}
 	clear_extent_bit(tree, page_start, page_end,
-		 EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC,
-		 1, 1, NULL, GFP_NOFS);
+		 EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC |
+		 EXTENT_DO_ACCOUNTING, 1, 1, NULL, GFP_NOFS);
 	__btrfs_releasepage(page, GFP_NOFS);
 
 	ClearPageChecked(page);
@@ -4747,6 +4926,13 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 		goto out;
 	}
 
+	ret = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+	if (ret) {
+		btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+		ret = VM_FAULT_SIGBUS;
+		goto out;
+	}
+
 	ret = VM_FAULT_NOPAGE; /* make the VM retry the fault */
 again:
 	lock_page(page);
@@ -4778,7 +4964,24 @@ again:
 		goto again;
 	}
 
-	btrfs_set_extent_delalloc(inode, page_start, page_end);
+	/*
+	 * XXX - page_mkwrite gets called every time the page is dirtied, even
+	 * if it was already dirty, so for space accounting reasons we need to
+	 * clear any delalloc bits for the range we are fixing to save.  There
+	 * is probably a better way to do this, but for now keep consistent with
+	 * prepare_pages in the normal write path.
+	 */
+	clear_extent_bits(&BTRFS_I(inode)->io_tree, page_start, page_end,
+			  EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING,
+			  GFP_NOFS);
+
+	ret = btrfs_set_extent_delalloc(inode, page_start, page_end);
+	if (ret) {
+		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		ret = VM_FAULT_SIGBUS;
+		btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+		goto out_unlock;
+	}
 	ret = 0;
 
 	/* page is wholly or partially inside EOF */
@@ -4797,10 +5000,13 @@ again:
 	set_page_dirty(page);
 	SetPageUptodate(page);
 
-	BTRFS_I(inode)->last_trans = root->fs_info->generation + 1;
+	BTRFS_I(inode)->last_trans = root->fs_info->generation;
+	BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid;
+
 	unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
 
 out_unlock:
+	btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
 	if (!ret)
 		return VM_FAULT_LOCKED;
 	unlock_page(page);
@@ -4821,7 +5027,9 @@ static void btrfs_truncate(struct inode *inode)
 	if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
 		return;
 
-	btrfs_truncate_page(inode->i_mapping, inode->i_size);
+	ret = btrfs_truncate_page(inode->i_mapping, inode->i_size);
+	if (ret)
+		return;
 	btrfs_wait_ordered_range(inode, inode->i_size & (~mask), (u64)-1);
 
 	trans = btrfs_start_transaction(root, 1);
@@ -4916,7 +5124,11 @@ struct inode *btrfs_alloc_inode(struct super_block *sb)
 	if (!ei)
 		return NULL;
 	ei->last_trans = 0;
+	ei->last_sub_trans = 0;
 	ei->logged_trans = 0;
+	ei->outstanding_extents = 0;
+	ei->reserved_extents = 0;
+	spin_lock_init(&ei->accounting_lock);
 	btrfs_ordered_inode_tree_init(&ei->ordered_tree);
 	INIT_LIST_HEAD(&ei->i_orphan);
 	INIT_LIST_HEAD(&ei->ordered_operations);
@@ -5070,7 +5282,12 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	    new_inode->i_size > BTRFS_EMPTY_DIR_SIZE)
 		return -ENOTEMPTY;
 
-	ret = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 items for dir items
+	 * 1 item for orphan entry
+	 * 1 item for ref
+	 */
+	ret = btrfs_reserve_metadata_space(root, 4);
 	if (ret)
 		return ret;
 
@@ -5185,6 +5402,8 @@ out_fail:
 
 	if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
 		up_read(&root->fs_info->subvol_sem);
+
+	btrfs_unreserve_metadata_space(root, 4);
 	return ret;
 }
 
@@ -5256,11 +5475,18 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
 	if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root))
 		return -ENAMETOOLONG;
 
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 items for inode item and ref
+	 * 2 items for dir items
+	 * 1 item for xattr if selinux is on
+	 */
+	err = btrfs_reserve_metadata_space(root, 5);
 	if (err)
-		goto out_fail;
+		return err;
 
 	trans = btrfs_start_transaction(root, 1);
+	if (!trans)
+		goto out_fail;
 	btrfs_set_trans_block_group(trans, dir);
 
 	err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
@@ -5341,6 +5567,7 @@ out_unlock:
 	nr = trans->blocks_used;
 	btrfs_end_transaction_throttle(trans, root);
 out_fail:
+	btrfs_unreserve_metadata_space(root, 5);
 	if (drop_inode) {
 		inode_dec_link_count(inode);
 		iput(inode);
@@ -5362,6 +5589,11 @@ static int prealloc_file_range(struct btrfs_trans_handle *trans,
 
 	while (num_bytes > 0) {
 		alloc_size = min(num_bytes, root->fs_info->max_extent);
+
+		ret = btrfs_reserve_metadata_space(root, 1);
+		if (ret)
+			goto out;
+
 		ret = btrfs_reserve_extent(trans, root, alloc_size,
 					   root->sectorsize, 0, alloc_hint,
 					   (u64)-1, &ins, 1);
@@ -5381,6 +5613,7 @@ static int prealloc_file_range(struct btrfs_trans_handle *trans,
 		num_bytes -= ins.offset;
 		cur_offset += ins.offset;
 		alloc_hint = ins.objectid + ins.offset;
+		btrfs_unreserve_metadata_space(root, 1);
 	}
 out:
 	if (cur_offset > start) {
@@ -5544,7 +5777,7 @@ static const struct inode_operations btrfs_dir_ro_inode_operations = {
 	.permission	= btrfs_permission,
 };
 
-static struct file_operations btrfs_dir_file_operations = {
+static const struct file_operations btrfs_dir_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= generic_read_dir,
 	.readdir	= btrfs_real_readdir,
@@ -5566,6 +5799,8 @@ static struct extent_io_ops btrfs_extent_io_ops = {
 	.readpage_io_failed_hook = btrfs_io_failed_hook,
 	.set_bit_hook = btrfs_set_bit_hook,
 	.clear_bit_hook = btrfs_clear_bit_hook,
+	.merge_extent_hook = btrfs_merge_extent_hook,
+	.split_extent_hook = btrfs_split_extent_hook,
 };
 
 /*
@@ -5632,6 +5867,6 @@ static const struct inode_operations btrfs_symlink_inode_operations = {
 	.removexattr	= btrfs_removexattr,
 };
 
-struct dentry_operations btrfs_dentry_operations = {
+const struct dentry_operations btrfs_dentry_operations = {
 	.d_delete	= btrfs_dentry_delete,
 };
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index a8577a7f26ab..cdbb054102b9 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -239,7 +239,13 @@ static noinline int create_subvol(struct btrfs_root *root,
 	u64 index = 0;
 	unsigned long nr = 1;
 
-	ret = btrfs_check_metadata_free_space(root);
+	/*
+	 * 1 - inode item
+	 * 2 - refs
+	 * 1 - root item
+	 * 2 - dir items
+	 */
+	ret = btrfs_reserve_metadata_space(root, 6);
 	if (ret)
 		return ret;
 
@@ -340,6 +346,9 @@ fail:
 	err = btrfs_commit_transaction(trans, root);
 	if (err && !ret)
 		ret = err;
+
+	btrfs_unreserve_metadata_space(root, 6);
+	btrfs_btree_balance_dirty(root, nr);
 	return ret;
 }
 
@@ -355,19 +364,27 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry,
 	if (!root->ref_cows)
 		return -EINVAL;
 
-	ret = btrfs_check_metadata_free_space(root);
+	/*
+	 * 1 - inode item
+	 * 2 - refs
+	 * 1 - root item
+	 * 2 - dir items
+	 */
+	ret = btrfs_reserve_metadata_space(root, 6);
 	if (ret)
 		goto fail_unlock;
 
 	pending_snapshot = kzalloc(sizeof(*pending_snapshot), GFP_NOFS);
 	if (!pending_snapshot) {
 		ret = -ENOMEM;
+		btrfs_unreserve_metadata_space(root, 6);
 		goto fail_unlock;
 	}
 	pending_snapshot->name = kmalloc(namelen + 1, GFP_NOFS);
 	if (!pending_snapshot->name) {
 		ret = -ENOMEM;
 		kfree(pending_snapshot);
+		btrfs_unreserve_metadata_space(root, 6);
 		goto fail_unlock;
 	}
 	memcpy(pending_snapshot->name, name, namelen);
@@ -813,6 +830,7 @@ out_up_write:
 out_unlock:
 	mutex_unlock(&inode->i_mutex);
 	if (!err) {
+		shrink_dcache_sb(root->fs_info->sb);
 		btrfs_invalidate_inodes(dest);
 		d_delete(dentry);
 	}
@@ -1105,8 +1123,10 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 					datao += off - key.offset;
 					datal -= off - key.offset;
 				}
-				if (key.offset + datao + datal > off + len)
-					datal = off + len - key.offset - datao;
+
+				if (key.offset + datal > off + len)
+					datal = off + len - key.offset;
+
 				/* disko == 0 means it's a hole */
 				if (!disko)
 					datao = 0;
@@ -1215,15 +1235,15 @@ static long btrfs_ioctl_trans_start(struct file *file)
 	struct inode *inode = fdentry(file)->d_inode;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_trans_handle *trans;
-	int ret = 0;
+	int ret;
 
+	ret = -EPERM;
 	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
+		goto out;
 
-	if (file->private_data) {
-		ret = -EINPROGRESS;
+	ret = -EINPROGRESS;
+	if (file->private_data)
 		goto out;
-	}
 
 	ret = mnt_want_write(file->f_path.mnt);
 	if (ret)
@@ -1233,12 +1253,19 @@ static long btrfs_ioctl_trans_start(struct file *file)
 	root->fs_info->open_ioctl_trans++;
 	mutex_unlock(&root->fs_info->trans_mutex);
 
+	ret = -ENOMEM;
 	trans = btrfs_start_ioctl_transaction(root, 0);
-	if (trans)
-		file->private_data = trans;
-	else
-		ret = -ENOMEM;
-	/*printk(KERN_INFO "btrfs_ioctl_trans_start on %p\n", file);*/
+	if (!trans)
+		goto out_drop;
+
+	file->private_data = trans;
+	return 0;
+
+out_drop:
+	mutex_lock(&root->fs_info->trans_mutex);
+	root->fs_info->open_ioctl_trans--;
+	mutex_unlock(&root->fs_info->trans_mutex);
+	mnt_drop_write(file->f_path.mnt);
 out:
 	return ret;
 }
@@ -1254,24 +1281,20 @@ long btrfs_ioctl_trans_end(struct file *file)
 	struct inode *inode = fdentry(file)->d_inode;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_trans_handle *trans;
-	int ret = 0;
 
 	trans = file->private_data;
-	if (!trans) {
-		ret = -EINVAL;
-		goto out;
-	}
-	btrfs_end_transaction(trans, root);
+	if (!trans)
+		return -EINVAL;
 	file->private_data = NULL;
 
+	btrfs_end_transaction(trans, root);
+
 	mutex_lock(&root->fs_info->trans_mutex);
 	root->fs_info->open_ioctl_trans--;
 	mutex_unlock(&root->fs_info->trans_mutex);
 
 	mnt_drop_write(file->f_path.mnt);
-
-out:
-	return ret;
+	return 0;
 }
 
 long btrfs_ioctl(struct file *file, unsigned int
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index b5d6d24726b0..5799bc46a309 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -306,6 +306,12 @@ int btrfs_remove_ordered_extent(struct inode *inode,
 	tree->last = NULL;
 	set_bit(BTRFS_ORDERED_COMPLETE, &entry->flags);
 
+	spin_lock(&BTRFS_I(inode)->accounting_lock);
+	BTRFS_I(inode)->outstanding_extents--;
+	spin_unlock(&BTRFS_I(inode)->accounting_lock);
+	btrfs_unreserve_metadata_for_delalloc(BTRFS_I(inode)->root,
+					      inode, 1);
+
 	spin_lock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
 	list_del_init(&entry->root_extent_list);
 
@@ -458,7 +464,7 @@ void btrfs_start_ordered_extent(struct inode *inode,
 	 * start IO on any dirty ones so the wait doesn't stall waiting
 	 * for pdflush to find them
 	 */
-	btrfs_fdatawrite_range(inode->i_mapping, start, end, WB_SYNC_ALL);
+	filemap_fdatawrite_range(inode->i_mapping, start, end);
 	if (wait) {
 		wait_event(entry->wait, test_bit(BTRFS_ORDERED_COMPLETE,
 						 &entry->flags));
@@ -488,17 +494,15 @@ again:
 	/* start IO across the range first to instantiate any delalloc
 	 * extents
 	 */
-	btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
+	filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
 
 	/* The compression code will leave pages locked but return from
 	 * writepage without setting the page writeback.  Starting again
 	 * with WB_SYNC_ALL will end up waiting for the IO to actually start.
 	 */
-	btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
+	filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
 
-	btrfs_wait_on_page_writeback_range(inode->i_mapping,
-					   start >> PAGE_CACHE_SHIFT,
-					   orig_end >> PAGE_CACHE_SHIFT);
+	filemap_fdatawait_range(inode->i_mapping, start, orig_end);
 
 	end = orig_end;
 	found = 0;
@@ -716,89 +720,6 @@ out:
 }
 
 
-/**
- * taken from mm/filemap.c because it isn't exported
- *
- * __filemap_fdatawrite_range - start writeback on mapping dirty pages in range
- * @mapping:	address space structure to write
- * @start:	offset in bytes where the range starts
- * @end:	offset in bytes where the range ends (inclusive)
- * @sync_mode:	enable synchronous operation
- *
- * Start writeback against all of a mapping's dirty pages that lie
- * within the byte offsets <start, end> inclusive.
- *
- * If sync_mode is WB_SYNC_ALL then this is a "data integrity" operation, as
- * opposed to a regular memory cleansing writeback.  The difference between
- * these two operations is that if a dirty page/buffer is encountered, it must
- * be waited upon, and not just skipped over.
- */
-int btrfs_fdatawrite_range(struct address_space *mapping, loff_t start,
-			   loff_t end, int sync_mode)
-{
-	struct writeback_control wbc = {
-		.sync_mode = sync_mode,
-		.nr_to_write = mapping->nrpages * 2,
-		.range_start = start,
-		.range_end = end,
-	};
-	return btrfs_writepages(mapping, &wbc);
-}
-
-/**
- * taken from mm/filemap.c because it isn't exported
- *
- * wait_on_page_writeback_range - wait for writeback to complete
- * @mapping:	target address_space
- * @start:	beginning page index
- * @end:	ending page index
- *
- * Wait for writeback to complete against pages indexed by start->end
- * inclusive
- */
-int btrfs_wait_on_page_writeback_range(struct address_space *mapping,
-				       pgoff_t start, pgoff_t end)
-{
-	struct pagevec pvec;
-	int nr_pages;
-	int ret = 0;
-	pgoff_t index;
-
-	if (end < start)
-		return 0;
-
-	pagevec_init(&pvec, 0);
-	index = start;
-	while ((index <= end) &&
-			(nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
-			PAGECACHE_TAG_WRITEBACK,
-			min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1)) != 0) {
-		unsigned i;
-
-		for (i = 0; i < nr_pages; i++) {
-			struct page *page = pvec.pages[i];
-
-			/* until radix tree lookup accepts end_index */
-			if (page->index > end)
-				continue;
-
-			wait_on_page_writeback(page);
-			if (PageError(page))
-				ret = -EIO;
-		}
-		pagevec_release(&pvec);
-		cond_resched();
-	}
-
-	/* Check for outstanding write errors */
-	if (test_and_clear_bit(AS_ENOSPC, &mapping->flags))
-		ret = -ENOSPC;
-	if (test_and_clear_bit(AS_EIO, &mapping->flags))
-		ret = -EIO;
-
-	return ret;
-}
-
 /*
  * add a given inode to the list of inodes that must be fully on
  * disk before a transaction commit finishes.
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index 993a7ea45c70..f82e87488ca8 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -153,10 +153,6 @@ btrfs_lookup_first_ordered_extent(struct inode * inode, u64 file_offset);
 int btrfs_ordered_update_i_size(struct inode *inode,
 				struct btrfs_ordered_extent *ordered);
 int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr, u32 *sum);
-int btrfs_wait_on_page_writeback_range(struct address_space *mapping,
-				       pgoff_t start, pgoff_t end);
-int btrfs_fdatawrite_range(struct address_space *mapping, loff_t start,
-			   loff_t end, int sync_mode);
 int btrfs_wait_ordered_extents(struct btrfs_root *root, int nocow_only);
 int btrfs_run_ordered_operations(struct btrfs_root *root, int wait);
 int btrfs_add_ordered_operation(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 361ad323faac..cfcc93c93a7b 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -3518,7 +3518,7 @@ int btrfs_relocate_block_group(struct btrfs_root *extent_root, u64 group_start)
 	BUG_ON(!rc->block_group);
 
 	btrfs_init_workers(&rc->workers, "relocate",
-			   fs_info->thread_pool_size);
+			   fs_info->thread_pool_size, NULL);
 
 	rc->extent_root = extent_root;
 	btrfs_prepare_block_group_relocation(extent_root, rc->block_group);
@@ -3701,7 +3701,7 @@ int btrfs_recover_relocation(struct btrfs_root *root)
 	mapping_tree_init(&rc->reloc_root_tree);
 	INIT_LIST_HEAD(&rc->reloc_roots);
 	btrfs_init_workers(&rc->workers, "relocate",
-			   root->fs_info->thread_pool_size);
+			   root->fs_info->thread_pool_size, NULL);
 	rc->extent_root = root->fs_info->extent_root;
 
 	set_reloc_control(rc);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 67035385444c..752a5463bf53 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -66,7 +66,8 @@ enum {
 	Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
 	Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
 	Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl,
-	Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_err,
+	Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit,
+	Opt_discard, Opt_err,
 };
 
 static match_table_t tokens = {
@@ -88,6 +89,7 @@ static match_table_t tokens = {
 	{Opt_notreelog, "notreelog"},
 	{Opt_flushoncommit, "flushoncommit"},
 	{Opt_ratio, "metadata_ratio=%d"},
+	{Opt_discard, "discard"},
 	{Opt_err, NULL},
 };
 
@@ -257,6 +259,9 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 				       info->metadata_ratio);
 			}
 			break;
+		case Opt_discard:
+			btrfs_set_opt(info->mount_opt, DISCARD);
+			break;
 		default:
 			break;
 		}
@@ -344,7 +349,9 @@ static int btrfs_fill_super(struct super_block *sb,
 	sb->s_export_op = &btrfs_export_ops;
 	sb->s_xattr = btrfs_xattr_handlers;
 	sb->s_time_gran = 1;
+#ifdef CONFIG_BTRFS_FS_POSIX_ACL
 	sb->s_flags |= MS_POSIXACL;
+#endif
 
 	tree_root = open_ctree(sb, fs_devices, (char *)data);
 
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 88f866f85e7a..bca82a4ca8e6 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -186,6 +186,9 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
 	h->alloc_exclude_start = 0;
 	h->delayed_ref_updates = 0;
 
+	if (!current->journal_info)
+		current->journal_info = h;
+
 	root->fs_info->running_transaction->use_count++;
 	record_root_in_trans(h, root);
 	mutex_unlock(&root->fs_info->trans_mutex);
@@ -317,6 +320,9 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
 		wake_up(&cur_trans->writer_wait);
 	put_transaction(cur_trans);
 	mutex_unlock(&info->trans_mutex);
+
+	if (current->journal_info == trans)
+		current->journal_info = NULL;
 	memset(trans, 0, sizeof(*trans));
 	kmem_cache_free(btrfs_trans_handle_cachep, trans);
 
@@ -338,10 +344,10 @@ int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans,
 /*
  * when btree blocks are allocated, they have some corresponding bits set for
  * them in one of two extent_io trees.  This is used to make sure all of
- * those extents are on disk for transaction or log commit
+ * those extents are sent to disk but does not wait on them
  */
-int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
-					struct extent_io_tree *dirty_pages)
+int btrfs_write_marked_extents(struct btrfs_root *root,
+			       struct extent_io_tree *dirty_pages)
 {
 	int ret;
 	int err = 0;
@@ -388,6 +394,29 @@ int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
 			page_cache_release(page);
 		}
 	}
+	if (err)
+		werr = err;
+	return werr;
+}
+
+/*
+ * when btree blocks are allocated, they have some corresponding bits set for
+ * them in one of two extent_io trees.  This is used to make sure all of
+ * those extents are on disk for transaction or log commit.  We wait
+ * on all the pages and clear them from the dirty pages state tree
+ */
+int btrfs_wait_marked_extents(struct btrfs_root *root,
+			      struct extent_io_tree *dirty_pages)
+{
+	int ret;
+	int err = 0;
+	int werr = 0;
+	struct page *page;
+	struct inode *btree_inode = root->fs_info->btree_inode;
+	u64 start = 0;
+	u64 end;
+	unsigned long index;
+
 	while (1) {
 		ret = find_first_extent_bit(dirty_pages, 0, &start, &end,
 					    EXTENT_DIRTY);
@@ -418,6 +447,22 @@ int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
 	return werr;
 }
 
+/*
+ * when btree blocks are allocated, they have some corresponding bits set for
+ * them in one of two extent_io trees.  This is used to make sure all of
+ * those extents are on disk for transaction or log commit
+ */
+int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
+					struct extent_io_tree *dirty_pages)
+{
+	int ret;
+	int ret2;
+
+	ret = btrfs_write_marked_extents(root, dirty_pages);
+	ret2 = btrfs_wait_marked_extents(root, dirty_pages);
+	return ret || ret2;
+}
+
 int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans,
 				     struct btrfs_root *root)
 {
@@ -743,6 +788,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 	memcpy(&pending->root_key, &key, sizeof(key));
 fail:
 	kfree(new_root_item);
+	btrfs_unreserve_metadata_space(root, 6);
 	return ret;
 }
 
@@ -1059,6 +1105,9 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 	mutex_unlock(&root->fs_info->trans_mutex);
 
+	if (current->journal_info == trans)
+		current->journal_info = NULL;
+
 	kmem_cache_free(btrfs_trans_handle_cachep, trans);
 	return ret;
 }
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 663c67404918..d4e3e7a6938c 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -79,6 +79,7 @@ static inline void btrfs_set_inode_last_trans(struct btrfs_trans_handle *trans,
 					      struct inode *inode)
 {
 	BTRFS_I(inode)->last_trans = trans->transaction->transid;
+	BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid;
 }
 
 int btrfs_end_transaction(struct btrfs_trans_handle *trans,
@@ -107,5 +108,9 @@ int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
 				struct btrfs_root *root);
 int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
 					struct extent_io_tree *dirty_pages);
+int btrfs_write_marked_extents(struct btrfs_root *root,
+					struct extent_io_tree *dirty_pages);
+int btrfs_wait_marked_extents(struct btrfs_root *root,
+					struct extent_io_tree *dirty_pages);
 int btrfs_transaction_in_commit(struct btrfs_fs_info *info);
 #endif
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 7827841b55cb..741666a7676a 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -137,11 +137,20 @@ static int start_log_trans(struct btrfs_trans_handle *trans,
 
 	mutex_lock(&root->log_mutex);
 	if (root->log_root) {
+		if (!root->log_start_pid) {
+			root->log_start_pid = current->pid;
+			root->log_multiple_pids = false;
+		} else if (root->log_start_pid != current->pid) {
+			root->log_multiple_pids = true;
+		}
+
 		root->log_batch++;
 		atomic_inc(&root->log_writers);
 		mutex_unlock(&root->log_mutex);
 		return 0;
 	}
+	root->log_multiple_pids = false;
+	root->log_start_pid = current->pid;
 	mutex_lock(&root->fs_info->tree_log_mutex);
 	if (!root->fs_info->log_root_tree) {
 		ret = btrfs_init_log_root_tree(trans, root->fs_info);
@@ -1971,6 +1980,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
 	int ret;
 	struct btrfs_root *log = root->log_root;
 	struct btrfs_root *log_root_tree = root->fs_info->log_root_tree;
+	u64 log_transid = 0;
 
 	mutex_lock(&root->log_mutex);
 	index1 = root->log_transid % 2;
@@ -1987,10 +1997,11 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
 
 	while (1) {
 		unsigned long batch = root->log_batch;
-		mutex_unlock(&root->log_mutex);
-		schedule_timeout_uninterruptible(1);
-		mutex_lock(&root->log_mutex);
-
+		if (root->log_multiple_pids) {
+			mutex_unlock(&root->log_mutex);
+			schedule_timeout_uninterruptible(1);
+			mutex_lock(&root->log_mutex);
+		}
 		wait_for_writer(trans, root);
 		if (batch == root->log_batch)
 			break;
@@ -2003,14 +2014,19 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
 		goto out;
 	}
 
-	ret = btrfs_write_and_wait_marked_extents(log, &log->dirty_log_pages);
+	/* we start IO on  all the marked extents here, but we don't actually
+	 * wait for them until later.
+	 */
+	ret = btrfs_write_marked_extents(log, &log->dirty_log_pages);
 	BUG_ON(ret);
 
 	btrfs_set_root_node(&log->root_item, log->node);
 
 	root->log_batch = 0;
+	log_transid = root->log_transid;
 	root->log_transid++;
 	log->log_transid = root->log_transid;
+	root->log_start_pid = 0;
 	smp_mb();
 	/*
 	 * log tree has been flushed to disk, new modifications of
@@ -2036,6 +2052,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
 
 	index2 = log_root_tree->log_transid % 2;
 	if (atomic_read(&log_root_tree->log_commit[index2])) {
+		btrfs_wait_marked_extents(log, &log->dirty_log_pages);
 		wait_log_commit(trans, log_root_tree,
 				log_root_tree->log_transid);
 		mutex_unlock(&log_root_tree->log_mutex);
@@ -2055,6 +2072,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
 	 * check the full commit flag again
 	 */
 	if (root->fs_info->last_trans_log_full_commit == trans->transid) {
+		btrfs_wait_marked_extents(log, &log->dirty_log_pages);
 		mutex_unlock(&log_root_tree->log_mutex);
 		ret = -EAGAIN;
 		goto out_wake_log_root;
@@ -2063,6 +2081,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
 	ret = btrfs_write_and_wait_marked_extents(log_root_tree,
 				&log_root_tree->dirty_log_pages);
 	BUG_ON(ret);
+	btrfs_wait_marked_extents(log, &log->dirty_log_pages);
 
 	btrfs_set_super_log_root(&root->fs_info->super_for_commit,
 				log_root_tree->node->start);
@@ -2082,9 +2101,14 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
 	 * the running transaction open, so a full commit can't hop
 	 * in and cause problems either.
 	 */
-	write_ctree_super(trans, root->fs_info->tree_root, 2);
+	write_ctree_super(trans, root->fs_info->tree_root, 1);
 	ret = 0;
 
+	mutex_lock(&root->log_mutex);
+	if (root->last_log_commit < log_transid)
+		root->last_log_commit = log_transid;
+	mutex_unlock(&root->log_mutex);
+
 out_wake_log_root:
 	atomic_set(&log_root_tree->log_commit[index2], 0);
 	smp_mb();
@@ -2852,6 +2876,21 @@ out:
 	return ret;
 }
 
+static int inode_in_log(struct btrfs_trans_handle *trans,
+		 struct inode *inode)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	int ret = 0;
+
+	mutex_lock(&root->log_mutex);
+	if (BTRFS_I(inode)->logged_trans == trans->transid &&
+	    BTRFS_I(inode)->last_sub_trans <= root->last_log_commit)
+		ret = 1;
+	mutex_unlock(&root->log_mutex);
+	return ret;
+}
+
+
 /*
  * helper function around btrfs_log_inode to make sure newly created
  * parent directories also end up in the log.  A minimal inode and backref
@@ -2891,6 +2930,11 @@ int btrfs_log_inode_parent(struct btrfs_trans_handle *trans,
 	if (ret)
 		goto end_no_trans;
 
+	if (inode_in_log(trans, inode)) {
+		ret = BTRFS_NO_LOG_SYNC;
+		goto end_no_trans;
+	}
+
 	start_log_trans(trans, root);
 
 	ret = btrfs_log_inode(trans, root, inode, inode_only);
diff --git a/fs/btrfs/tree-log.h b/fs/btrfs/tree-log.h
index d09c7609e16b..0776eacb5083 100644
--- a/fs/btrfs/tree-log.h
+++ b/fs/btrfs/tree-log.h
@@ -19,6 +19,9 @@
 #ifndef __TREE_LOG_
 #define __TREE_LOG_
 
+/* return value for btrfs_log_dentry_safe that means we don't need to log it at all */
+#define BTRFS_NO_LOG_SYNC 256
+
 int btrfs_sync_log(struct btrfs_trans_handle *trans,
 		   struct btrfs_root *root);
 int btrfs_free_log(struct btrfs_trans_handle *trans, struct btrfs_root *root);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 23e7d36ff325..7eda483d7b5a 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -446,8 +446,10 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
 			goto error;
 
 		device->name = kstrdup(orig_dev->name, GFP_NOFS);
-		if (!device->name)
+		if (!device->name) {
+			kfree(device);
 			goto error;
+		}
 
 		device->devid = orig_dev->devid;
 		device->work.func = pending_bios_fn;
diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c
index a9d3bf4d2689..b6dd5967c48a 100644
--- a/fs/btrfs/xattr.c
+++ b/fs/btrfs/xattr.c
@@ -260,7 +260,7 @@ err:
  * attributes are handled directly.
  */
 struct xattr_handler *btrfs_xattr_handlers[] = {
-#ifdef CONFIG_FS_POSIX_ACL
+#ifdef CONFIG_BTRFS_FS_POSIX_ACL
 	&btrfs_xattr_acl_access_handler,
 	&btrfs_xattr_acl_default_handler,
 #endif
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 43003e0bef18..b09098079916 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1577,7 +1577,8 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
 
 out_err:
 	if (tcp_ses) {
-		kfree(tcp_ses->hostname);
+		if (!IS_ERR(tcp_ses->hostname))
+			kfree(tcp_ses->hostname);
 		if (tcp_ses->ssocket)
 			sock_release(tcp_ses->ssocket);
 		kfree(tcp_ses);
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index 0376ac66c44a..be4392ca2098 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/time.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/fcntl.h>
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 240cef14fe58..70736eb4b516 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -316,6 +316,10 @@ int dlm_lowcomms_connect_node(int nodeid)
 {
 	struct connection *con;
 
+	/* with sctp there's no connecting without sending */
+	if (dlm_config.ci_protocol != 0)
+		return 0;
+
 	if (nodeid == dlm_our_nodeid())
 		return 0;
 
@@ -455,9 +459,9 @@ static void process_sctp_notification(struct connection *con,
 			int prim_len, ret;
 			int addr_len;
 			struct connection *new_con;
-			struct file *file;
 			sctp_peeloff_arg_t parg;
 			int parglen = sizeof(parg);
+			int err;
 
 			/*
 			 * We get this before any data for an association.
@@ -512,19 +516,22 @@ static void process_sctp_notification(struct connection *con,
 			ret = kernel_getsockopt(con->sock, IPPROTO_SCTP,
 						SCTP_SOCKOPT_PEELOFF,
 						(void *)&parg, &parglen);
-			if (ret) {
+			if (ret < 0) {
 				log_print("Can't peel off a socket for "
-					  "connection %d to node %d: err=%d\n",
+					  "connection %d to node %d: err=%d",
 					  parg.associd, nodeid, ret);
+				return;
+			}
+			new_con->sock = sockfd_lookup(parg.sd, &err);
+			if (!new_con->sock) {
+				log_print("sockfd_lookup error %d", err);
+				return;
 			}
-			file = fget(parg.sd);
-			new_con->sock = SOCKET_I(file->f_dentry->d_inode);
 			add_sock(new_con->sock, new_con);
-			fput(file);
-			put_unused_fd(parg.sd);
+			sockfd_put(new_con->sock);
 
-			log_print("got new/restarted association %d nodeid %d",
-				 (int)sn->sn_assoc_change.sac_assoc_id, nodeid);
+			log_print("connecting to %d sctp association %d",
+				 nodeid, (int)sn->sn_assoc_change.sac_assoc_id);
 
 			/* Send any pending writes */
 			clear_bit(CF_CONNECT_PENDING, &new_con->flags);
@@ -837,8 +844,6 @@ static void sctp_init_assoc(struct connection *con)
 	if (con->retries++ > MAX_CONNECT_RETRIES)
 		return;
 
-	log_print("Initiating association with node %d", con->nodeid);
-
 	if (nodeid_to_addr(con->nodeid, (struct sockaddr *)&rem_addr)) {
 		log_print("no address for nodeid %d", con->nodeid);
 		return;
@@ -855,11 +860,14 @@ static void sctp_init_assoc(struct connection *con)
 	outmessage.msg_flags = MSG_EOR;
 
 	spin_lock(&con->writequeue_lock);
-	e = list_entry(con->writequeue.next, struct writequeue_entry,
-		       list);
 
-	BUG_ON((struct list_head *) e == &con->writequeue);
+	if (list_empty(&con->writequeue)) {
+		spin_unlock(&con->writequeue_lock);
+		log_print("writequeue empty for nodeid %d", con->nodeid);
+		return;
+	}
 
+	e = list_first_entry(&con->writequeue, struct writequeue_entry, list);
 	len = e->len;
 	offset = e->offset;
 	spin_unlock(&con->writequeue_lock);
diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig
index 8aadb99b7634..1cd6d9d3e29a 100644
--- a/fs/ecryptfs/Kconfig
+++ b/fs/ecryptfs/Kconfig
@@ -1,8 +1,9 @@
 config ECRYPT_FS
 	tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && KEYS && NET
+	depends on EXPERIMENTAL && KEYS && CRYPTO
 	select CRYPTO_ECB
 	select CRYPTO_CBC
+	select CRYPTO_MD5
 	help
 	  Encrypted filesystem that operates on the VFS layer.  See
 	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 101fe4c7b1ee..c6ac85d6c701 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -35,6 +35,7 @@
 #include <linux/key.h>
 #include <linux/parser.h>
 #include <linux/fs_stack.h>
+#include <linux/ima.h>
 #include "ecryptfs_kernel.h"
 
 /**
@@ -118,6 +119,7 @@ int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry)
 	const struct cred *cred = current_cred();
 	struct ecryptfs_inode_info *inode_info =
 		ecryptfs_inode_to_private(ecryptfs_dentry->d_inode);
+	int opened_lower_file = 0;
 	int rc = 0;
 
 	mutex_lock(&inode_info->lower_file_mutex);
@@ -134,9 +136,12 @@ int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry)
 			       "for lower_dentry [0x%p] and lower_mnt [0x%p]; "
 			       "rc = [%d]\n", lower_dentry, lower_mnt, rc);
 			inode_info->lower_file = NULL;
-		}
+		} else
+			opened_lower_file = 1;
 	}
 	mutex_unlock(&inode_info->lower_file_mutex);
+	if (opened_lower_file)
+		ima_counts_get(inode_info->lower_file);
 	return rc;
 }
 
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 72743d360509..7a520a862f49 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2321,7 +2321,18 @@ static int ext3_commit_super(struct super_block *sb,
 
 	if (!sbh)
 		return error;
-	es->s_wtime = cpu_to_le32(get_seconds());
+	/*
+	 * If the file system is mounted read-only, don't update the
+	 * superblock write time.  This avoids updating the superblock
+	 * write time when we are mounting the root file system
+	 * read/only but we need to replay the journal; at that point,
+	 * for people who are east of GMT and who make their clock
+	 * tick in localtime for Windows bug-for-bug compatibility,
+	 * the clock is set in the future, and this will cause e2fsck
+	 * to complain and force a full file system check.
+	 */
+	if (!(sb->s_flags & MS_RDONLY))
+		es->s_wtime = cpu_to_le32(get_seconds());
 	es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb));
 	es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb));
 	BUFFER_TRACE(sbh, "marking dirty");
diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
index d5c0ea2e8f2d..9f2d45d75b1a 100644
--- a/fs/ext4/Kconfig
+++ b/fs/ext4/Kconfig
@@ -26,20 +26,6 @@ config EXT4_FS
 
 	  If unsure, say N.
 
-config EXT4DEV_COMPAT
-	bool "Enable ext4dev compatibility"
-	depends on EXT4_FS
-	help
-	  Starting with 2.6.28, the name of the ext4 filesystem was
-	  renamed from ext4dev to ext4.  Unfortunately there are some
-	  legacy userspace programs (such as klibc's fstype) have
-	  "ext4dev" hardcoded.
-
-	  To enable backwards compatibility so that systems that are
-	  still expecting to mount ext4 filesystems using ext4dev,
-	  choose Y here.   This feature will go away by 2.6.31, so
-	  please arrange to get your userspace programs fixed!
-
 config EXT4_FS_XATTR
 	bool "Ext4 extended attributes"
 	depends on EXT4_FS
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index e227eea23f05..984ca0cb38c3 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -65,6 +65,12 @@ typedef __u32 ext4_lblk_t;
 /* data type for block group number */
 typedef unsigned int ext4_group_t;
 
+/*
+ * Flags used in mballoc's allocation_context flags field.  
+ *
+ * Also used to show what's going on for debugging purposes when the
+ * flag field is exported via the traceport interface
+ */
 
 /* prefer goal again. length */
 #define EXT4_MB_HINT_MERGE		0x0001
@@ -127,6 +133,16 @@ struct mpage_da_data {
 	int pages_written;
 	int retval;
 };
+#define	DIO_AIO_UNWRITTEN	0x1
+typedef struct ext4_io_end {
+	struct list_head	list;		/* per-file finished AIO list */
+	struct inode		*inode;		/* file being written to */
+	unsigned int		flag;		/* unwritten or not */
+	int			error;		/* I/O error code */
+	ext4_lblk_t		offset;		/* offset in the file */
+	size_t			size;		/* size of the extent */
+	struct work_struct	work;		/* data work queue */
+} ext4_io_end_t;
 
 /*
  * Special inodes numbers
@@ -347,7 +363,16 @@ struct ext4_new_group_data {
 	/* Call ext4_da_update_reserve_space() after successfully 
 	   allocating the blocks */
 #define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE	0x0008
-
+	/* caller is from the direct IO path, request to creation of an
+	unitialized extents if not allocated, split the uninitialized
+	extent if blocks has been preallocated already*/
+#define EXT4_GET_BLOCKS_DIO			0x0010
+#define EXT4_GET_BLOCKS_CONVERT			0x0020
+#define EXT4_GET_BLOCKS_DIO_CREATE_EXT		(EXT4_GET_BLOCKS_DIO|\
+					 EXT4_GET_BLOCKS_CREATE_UNINIT_EXT)
+	/* Convert extent to initialized after direct IO complete */
+#define EXT4_GET_BLOCKS_DIO_CONVERT_EXT		(EXT4_GET_BLOCKS_CONVERT|\
+					 EXT4_GET_BLOCKS_DIO_CREATE_EXT)
 
 /*
  * ioctl commands
@@ -500,8 +525,8 @@ struct move_extent {
 static inline __le32 ext4_encode_extra_time(struct timespec *time)
 {
        return cpu_to_le32((sizeof(time->tv_sec) > 4 ?
-			   time->tv_sec >> 32 : 0) |
-			   ((time->tv_nsec << 2) & EXT4_NSEC_MASK));
+			   (time->tv_sec >> 32) & EXT4_EPOCH_MASK : 0) |
+                          ((time->tv_nsec << EXT4_EPOCH_BITS) & EXT4_NSEC_MASK));
 }
 
 static inline void ext4_decode_extra_time(struct timespec *time, __le32 extra)
@@ -509,7 +534,7 @@ static inline void ext4_decode_extra_time(struct timespec *time, __le32 extra)
        if (sizeof(time->tv_sec) > 4)
 	       time->tv_sec |= (__u64)(le32_to_cpu(extra) & EXT4_EPOCH_MASK)
 			       << 32;
-       time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> 2;
+       time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> EXT4_EPOCH_BITS;
 }
 
 #define EXT4_INODE_SET_XTIME(xtime, inode, raw_inode)			       \
@@ -672,6 +697,11 @@ struct ext4_inode_info {
 	__u16 i_extra_isize;
 
 	spinlock_t i_block_reservation_lock;
+
+	/* completed async DIOs that might need unwritten extents handling */
+	struct list_head i_aio_dio_complete_list;
+	/* current io_end structure for async DIO write*/
+	ext4_io_end_t *cur_aio_dio;
 };
 
 /*
@@ -942,18 +972,11 @@ struct ext4_sb_info {
 	unsigned int s_mb_stats;
 	unsigned int s_mb_order2_reqs;
 	unsigned int s_mb_group_prealloc;
+	unsigned int s_max_writeback_mb_bump;
 	/* where last allocation was done - for stream allocation */
 	unsigned long s_mb_last_group;
 	unsigned long s_mb_last_start;
 
-	/* history to debug policy */
-	struct ext4_mb_history *s_mb_history;
-	int s_mb_history_cur;
-	int s_mb_history_max;
-	int s_mb_history_num;
-	spinlock_t s_mb_history_lock;
-	int s_mb_history_filter;
-
 	/* stats for buddy allocator */
 	spinlock_t s_mb_pa_lock;
 	atomic_t s_bal_reqs;	/* number of reqs with len > 1 */
@@ -980,6 +1003,9 @@ struct ext4_sb_info {
 
 	unsigned int s_log_groups_per_flex;
 	struct flex_groups *s_flex_groups;
+
+	/* workqueue for dio unwritten */
+	struct workqueue_struct *dio_unwritten_wq;
 };
 
 static inline struct ext4_sb_info *EXT4_SB(struct super_block *sb)
@@ -1397,7 +1423,7 @@ extern int ext4_block_truncate_page(handle_t *handle,
 		struct address_space *mapping, loff_t from);
 extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
 extern qsize_t ext4_get_reserved_space(struct inode *inode);
-
+extern int flush_aio_dio_completed_IO(struct inode *inode);
 /* ioctl.c */
 extern long ext4_ioctl(struct file *, unsigned int, unsigned long);
 extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long);
@@ -1699,6 +1725,8 @@ extern void ext4_ext_init(struct super_block *);
 extern void ext4_ext_release(struct super_block *);
 extern long ext4_fallocate(struct inode *inode, int mode, loff_t offset,
 			  loff_t len);
+extern int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
+			  loff_t len);
 extern int ext4_get_blocks(handle_t *handle, struct inode *inode,
 			   sector_t block, unsigned int max_blocks,
 			   struct buffer_head *bh, int flags);
diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 61652f1d15e6..2ca686454e87 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -220,6 +220,11 @@ static inline int ext4_ext_get_actual_len(struct ext4_extent *ext)
 		(le16_to_cpu(ext->ee_len) - EXT_INIT_MAX_LEN));
 }
 
+static inline void ext4_ext_mark_initialized(struct ext4_extent *ext)
+{
+	ext->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ext));
+}
+
 extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks);
 extern ext4_fsblk_t ext_pblock(struct ext4_extent *ex);
 extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
@@ -235,7 +240,7 @@ extern int ext4_ext_try_to_merge(struct inode *inode,
 				 struct ext4_ext_path *path,
 				 struct ext4_extent *);
 extern unsigned int ext4_ext_check_overlap(struct inode *, struct ext4_extent *, struct ext4_ext_path *);
-extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *);
+extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *, int);
 extern int ext4_ext_walk_space(struct inode *, ext4_lblk_t, ext4_lblk_t,
 							ext_prepare_callback, void *);
 extern struct ext4_ext_path *ext4_ext_find_extent(struct inode *, ext4_lblk_t,
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index 139fb8cb87e4..a2865980342f 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -161,11 +161,13 @@ int __ext4_handle_dirty_metadata(const char *where, handle_t *handle,
 handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks);
 int __ext4_journal_stop(const char *where, handle_t *handle);
 
-#define EXT4_NOJOURNAL_HANDLE	((handle_t *) 0x1)
+#define EXT4_NOJOURNAL_MAX_REF_COUNT ((unsigned long) 4096)
 
+/* Note:  Do not use this for NULL handles.  This is only to determine if
+ * a properly allocated handle is using a journal or not. */
 static inline int ext4_handle_valid(handle_t *handle)
 {
-	if (handle == EXT4_NOJOURNAL_HANDLE)
+	if ((unsigned long)handle < EXT4_NOJOURNAL_MAX_REF_COUNT)
 		return 0;
 	return 1;
 }
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 7a3832577923..10539e364283 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -723,7 +723,7 @@ err:
  * insert new index [@logical;@ptr] into the block at @curp;
  * check where to insert: before @curp or after @curp
  */
-static int ext4_ext_insert_index(handle_t *handle, struct inode *inode,
+int ext4_ext_insert_index(handle_t *handle, struct inode *inode,
 				struct ext4_ext_path *curp,
 				int logical, ext4_fsblk_t ptr)
 {
@@ -1586,7 +1586,7 @@ out:
  */
 int ext4_ext_insert_extent(handle_t *handle, struct inode *inode,
 				struct ext4_ext_path *path,
-				struct ext4_extent *newext)
+				struct ext4_extent *newext, int flag)
 {
 	struct ext4_extent_header *eh;
 	struct ext4_extent *ex, *fex;
@@ -1602,7 +1602,8 @@ int ext4_ext_insert_extent(handle_t *handle, struct inode *inode,
 	BUG_ON(path[depth].p_hdr == NULL);
 
 	/* try to insert block into found extent and return */
-	if (ex && ext4_can_extents_be_merged(inode, ex, newext)) {
+	if (ex && (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+		&& ext4_can_extents_be_merged(inode, ex, newext)) {
 		ext_debug("append [%d]%d block to %d:[%d]%d (from %llu)\n",
 				ext4_ext_is_uninitialized(newext),
 				ext4_ext_get_actual_len(newext),
@@ -1722,7 +1723,8 @@ has_space:
 
 merge:
 	/* try to merge extents to the right */
-	ext4_ext_try_to_merge(inode, path, nearex);
+	if (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+		ext4_ext_try_to_merge(inode, path, nearex);
 
 	/* try to merge extents to the left */
 
@@ -2378,6 +2380,7 @@ void ext4_ext_init(struct super_block *sb)
 	 */
 
 	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+#if defined(AGGRESSIVE_TEST) || defined(CHECK_BINSEARCH) || defined(EXTENTS_STATS)
 		printk(KERN_INFO "EXT4-fs: file extents enabled");
 #ifdef AGGRESSIVE_TEST
 		printk(", aggressive tests");
@@ -2389,6 +2392,7 @@ void ext4_ext_init(struct super_block *sb)
 		printk(", stats");
 #endif
 		printk("\n");
+#endif
 #ifdef EXTENTS_STATS
 		spin_lock_init(&EXT4_SB(sb)->s_ext_stats_lock);
 		EXT4_SB(sb)->s_ext_min = 1 << 30;
@@ -2490,7 +2494,6 @@ static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex)
 }
 
 #define EXT4_EXT_ZERO_LEN 7
-
 /*
  * This function is called by ext4_ext_get_blocks() if someone tries to write
  * to an uninitialized extent. It may result in splitting the uninitialized
@@ -2583,7 +2586,8 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 			ex3->ee_block = cpu_to_le32(iblock);
 			ext4_ext_store_pblock(ex3, newblock);
 			ex3->ee_len = cpu_to_le16(allocated);
-			err = ext4_ext_insert_extent(handle, inode, path, ex3);
+			err = ext4_ext_insert_extent(handle, inode, path,
+							ex3, 0);
 			if (err == -ENOSPC) {
 				err =  ext4_ext_zeroout(inode, &orig_ex);
 				if (err)
@@ -2639,7 +2643,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 		ext4_ext_store_pblock(ex3, newblock + max_blocks);
 		ex3->ee_len = cpu_to_le16(allocated - max_blocks);
 		ext4_ext_mark_uninitialized(ex3);
-		err = ext4_ext_insert_extent(handle, inode, path, ex3);
+		err = ext4_ext_insert_extent(handle, inode, path, ex3, 0);
 		if (err == -ENOSPC) {
 			err =  ext4_ext_zeroout(inode, &orig_ex);
 			if (err)
@@ -2757,7 +2761,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 	err = ext4_ext_dirty(handle, inode, path + depth);
 	goto out;
 insert:
-	err = ext4_ext_insert_extent(handle, inode, path, &newex);
+	err = ext4_ext_insert_extent(handle, inode, path, &newex, 0);
 	if (err == -ENOSPC) {
 		err =  ext4_ext_zeroout(inode, &orig_ex);
 		if (err)
@@ -2785,6 +2789,324 @@ fix_extent_len:
 }
 
 /*
+ * This function is called by ext4_ext_get_blocks() from
+ * ext4_get_blocks_dio_write() when DIO to write
+ * to an uninitialized extent.
+ *
+ * Writing to an uninitized extent may result in splitting the uninitialized
+ * extent into multiple /intialized unintialized extents (up to three)
+ * There are three possibilities:
+ *   a> There is no split required: Entire extent should be uninitialized
+ *   b> Splits in two extents: Write is happening at either end of the extent
+ *   c> Splits in three extents: Somone is writing in middle of the extent
+ *
+ * One of more index blocks maybe needed if the extent tree grow after
+ * the unintialized extent split. To prevent ENOSPC occur at the IO
+ * complete, we need to split the uninitialized extent before DIO submit
+ * the IO. The uninitilized extent called at this time will be split
+ * into three uninitialized extent(at most). After IO complete, the part
+ * being filled will be convert to initialized by the end_io callback function
+ * via ext4_convert_unwritten_extents().
+ */
+static int ext4_split_unwritten_extents(handle_t *handle,
+					struct inode *inode,
+					struct ext4_ext_path *path,
+					ext4_lblk_t iblock,
+					unsigned int max_blocks,
+					int flags)
+{
+	struct ext4_extent *ex, newex, orig_ex;
+	struct ext4_extent *ex1 = NULL;
+	struct ext4_extent *ex2 = NULL;
+	struct ext4_extent *ex3 = NULL;
+	struct ext4_extent_header *eh;
+	ext4_lblk_t ee_block;
+	unsigned int allocated, ee_len, depth;
+	ext4_fsblk_t newblock;
+	int err = 0;
+	int ret = 0;
+
+	ext_debug("ext4_split_unwritten_extents: inode %lu,"
+		  "iblock %llu, max_blocks %u\n", inode->i_ino,
+		  (unsigned long long)iblock, max_blocks);
+	depth = ext_depth(inode);
+	eh = path[depth].p_hdr;
+	ex = path[depth].p_ext;
+	ee_block = le32_to_cpu(ex->ee_block);
+	ee_len = ext4_ext_get_actual_len(ex);
+	allocated = ee_len - (iblock - ee_block);
+	newblock = iblock - ee_block + ext_pblock(ex);
+	ex2 = ex;
+	orig_ex.ee_block = ex->ee_block;
+	orig_ex.ee_len   = cpu_to_le16(ee_len);
+	ext4_ext_store_pblock(&orig_ex, ext_pblock(ex));
+
+	/*
+ 	 * if the entire unintialized extent length less than
+ 	 * the size of extent to write, there is no need to split
+ 	 * uninitialized extent
+ 	 */
+ 	if (allocated <= max_blocks)
+		return ret;
+
+	err = ext4_ext_get_access(handle, inode, path + depth);
+	if (err)
+		goto out;
+	/* ex1: ee_block to iblock - 1 : uninitialized */
+	if (iblock > ee_block) {
+		ex1 = ex;
+		ex1->ee_len = cpu_to_le16(iblock - ee_block);
+		ext4_ext_mark_uninitialized(ex1);
+		ex2 = &newex;
+	}
+	/*
+	 * for sanity, update the length of the ex2 extent before
+	 * we insert ex3, if ex1 is NULL. This is to avoid temporary
+	 * overlap of blocks.
+	 */
+	if (!ex1 && allocated > max_blocks)
+		ex2->ee_len = cpu_to_le16(max_blocks);
+	/* ex3: to ee_block + ee_len : uninitialised */
+	if (allocated > max_blocks) {
+		unsigned int newdepth;
+		ex3 = &newex;
+		ex3->ee_block = cpu_to_le32(iblock + max_blocks);
+		ext4_ext_store_pblock(ex3, newblock + max_blocks);
+		ex3->ee_len = cpu_to_le16(allocated - max_blocks);
+		ext4_ext_mark_uninitialized(ex3);
+		err = ext4_ext_insert_extent(handle, inode, path, ex3, flags);
+		if (err == -ENOSPC) {
+			err =  ext4_ext_zeroout(inode, &orig_ex);
+			if (err)
+				goto fix_extent_len;
+			/* update the extent length and mark as initialized */
+			ex->ee_block = orig_ex.ee_block;
+			ex->ee_len   = orig_ex.ee_len;
+			ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+			ext4_ext_dirty(handle, inode, path + depth);
+			/* zeroed the full extent */
+			/* blocks available from iblock */
+			return allocated;
+
+		} else if (err)
+			goto fix_extent_len;
+		/*
+		 * The depth, and hence eh & ex might change
+		 * as part of the insert above.
+		 */
+		newdepth = ext_depth(inode);
+		/*
+		 * update the extent length after successful insert of the
+		 * split extent
+		 */
+		orig_ex.ee_len = cpu_to_le16(ee_len -
+						ext4_ext_get_actual_len(ex3));
+		depth = newdepth;
+		ext4_ext_drop_refs(path);
+		path = ext4_ext_find_extent(inode, iblock, path);
+		if (IS_ERR(path)) {
+			err = PTR_ERR(path);
+			goto out;
+		}
+		eh = path[depth].p_hdr;
+		ex = path[depth].p_ext;
+		if (ex2 != &newex)
+			ex2 = ex;
+
+		err = ext4_ext_get_access(handle, inode, path + depth);
+		if (err)
+			goto out;
+
+		allocated = max_blocks;
+	}
+	/*
+	 * If there was a change of depth as part of the
+	 * insertion of ex3 above, we need to update the length
+	 * of the ex1 extent again here
+	 */
+	if (ex1 && ex1 != ex) {
+		ex1 = ex;
+		ex1->ee_len = cpu_to_le16(iblock - ee_block);
+		ext4_ext_mark_uninitialized(ex1);
+		ex2 = &newex;
+	}
+	/*
+	 * ex2: iblock to iblock + maxblocks-1 : to be direct IO written,
+	 * uninitialised still.
+	 */
+	ex2->ee_block = cpu_to_le32(iblock);
+	ext4_ext_store_pblock(ex2, newblock);
+	ex2->ee_len = cpu_to_le16(allocated);
+	ext4_ext_mark_uninitialized(ex2);
+	if (ex2 != ex)
+		goto insert;
+	/* Mark modified extent as dirty */
+	err = ext4_ext_dirty(handle, inode, path + depth);
+	ext_debug("out here\n");
+	goto out;
+insert:
+	err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
+	if (err == -ENOSPC) {
+		err =  ext4_ext_zeroout(inode, &orig_ex);
+		if (err)
+			goto fix_extent_len;
+		/* update the extent length and mark as initialized */
+		ex->ee_block = orig_ex.ee_block;
+		ex->ee_len   = orig_ex.ee_len;
+		ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+		ext4_ext_dirty(handle, inode, path + depth);
+		/* zero out the first half */
+		return allocated;
+	} else if (err)
+		goto fix_extent_len;
+out:
+	ext4_ext_show_leaf(inode, path);
+	return err ? err : allocated;
+
+fix_extent_len:
+	ex->ee_block = orig_ex.ee_block;
+	ex->ee_len   = orig_ex.ee_len;
+	ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+	ext4_ext_mark_uninitialized(ex);
+	ext4_ext_dirty(handle, inode, path + depth);
+	return err;
+}
+static int ext4_convert_unwritten_extents_dio(handle_t *handle,
+					      struct inode *inode,
+					      struct ext4_ext_path *path)
+{
+	struct ext4_extent *ex;
+	struct ext4_extent_header *eh;
+	int depth;
+	int err = 0;
+	int ret = 0;
+
+	depth = ext_depth(inode);
+	eh = path[depth].p_hdr;
+	ex = path[depth].p_ext;
+
+	err = ext4_ext_get_access(handle, inode, path + depth);
+	if (err)
+		goto out;
+	/* first mark the extent as initialized */
+	ext4_ext_mark_initialized(ex);
+
+	/*
+	 * We have to see if it can be merged with the extent
+	 * on the left.
+	 */
+	if (ex > EXT_FIRST_EXTENT(eh)) {
+		/*
+		 * To merge left, pass "ex - 1" to try_to_merge(),
+		 * since it merges towards right _only_.
+		 */
+		ret = ext4_ext_try_to_merge(inode, path, ex - 1);
+		if (ret) {
+			err = ext4_ext_correct_indexes(handle, inode, path);
+			if (err)
+				goto out;
+			depth = ext_depth(inode);
+			ex--;
+		}
+	}
+	/*
+	 * Try to Merge towards right.
+	 */
+	ret = ext4_ext_try_to_merge(inode, path, ex);
+	if (ret) {
+		err = ext4_ext_correct_indexes(handle, inode, path);
+		if (err)
+			goto out;
+		depth = ext_depth(inode);
+	}
+	/* Mark modified extent as dirty */
+	err = ext4_ext_dirty(handle, inode, path + depth);
+out:
+	ext4_ext_show_leaf(inode, path);
+	return err;
+}
+
+static int
+ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode,
+			ext4_lblk_t iblock, unsigned int max_blocks,
+			struct ext4_ext_path *path, int flags,
+			unsigned int allocated, struct buffer_head *bh_result,
+			ext4_fsblk_t newblock)
+{
+	int ret = 0;
+	int err = 0;
+	ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
+
+	ext_debug("ext4_ext_handle_uninitialized_extents: inode %lu, logical"
+		  "block %llu, max_blocks %u, flags %d, allocated %u",
+		  inode->i_ino, (unsigned long long)iblock, max_blocks,
+		  flags, allocated);
+	ext4_ext_show_leaf(inode, path);
+
+	/* DIO get_block() before submit the IO, split the extent */
+	if (flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) {
+		ret = ext4_split_unwritten_extents(handle,
+						inode, path, iblock,
+						max_blocks, flags);
+		/* flag the io_end struct that we need convert when IO done */
+		if (io)
+			io->flag = DIO_AIO_UNWRITTEN;
+		goto out;
+	}
+	/* DIO end_io complete, convert the filled extent to written */
+	if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) {
+		ret = ext4_convert_unwritten_extents_dio(handle, inode,
+							path);
+		goto out2;
+	}
+	/* buffered IO case */
+	/*
+	 * repeat fallocate creation request
+	 * we already have an unwritten extent
+	 */
+	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)
+		goto map_out;
+
+	/* buffered READ or buffered write_begin() lookup */
+	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
+		/*
+		 * We have blocks reserved already.  We
+		 * return allocated blocks so that delalloc
+		 * won't do block reservation for us.  But
+		 * the buffer head will be unmapped so that
+		 * a read from the block returns 0s.
+		 */
+		set_buffer_unwritten(bh_result);
+		goto out1;
+	}
+
+	/* buffered write, writepage time, convert*/
+	ret = ext4_ext_convert_to_initialized(handle, inode,
+						path, iblock,
+						max_blocks);
+out:
+	if (ret <= 0) {
+		err = ret;
+		goto out2;
+	} else
+		allocated = ret;
+	set_buffer_new(bh_result);
+map_out:
+	set_buffer_mapped(bh_result);
+out1:
+	if (allocated > max_blocks)
+		allocated = max_blocks;
+	ext4_ext_show_leaf(inode, path);
+	bh_result->b_bdev = inode->i_sb->s_bdev;
+	bh_result->b_blocknr = newblock;
+out2:
+	if (path) {
+		ext4_ext_drop_refs(path);
+		kfree(path);
+	}
+	return err ? err : allocated;
+}
+/*
  * Block allocation/map/preallocation routine for extents based files
  *
  *
@@ -2814,6 +3136,7 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 	int err = 0, depth, ret, cache_type;
 	unsigned int allocated = 0;
 	struct ext4_allocation_request ar;
+	ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
 
 	__clear_bit(BH_New, &bh_result->b_state);
 	ext_debug("blocks %u/%u requested for inode %lu\n",
@@ -2889,33 +3212,10 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 							EXT4_EXT_CACHE_EXTENT);
 				goto out;
 			}
-			if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)
-				goto out;
-			if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
-				if (allocated > max_blocks)
-					allocated = max_blocks;
-				/*
-				 * We have blocks reserved already.  We
-				 * return allocated blocks so that delalloc
-				 * won't do block reservation for us.  But
-				 * the buffer head will be unmapped so that
-				 * a read from the block returns 0s.
-				 */
-				set_buffer_unwritten(bh_result);
-				bh_result->b_bdev = inode->i_sb->s_bdev;
-				bh_result->b_blocknr = newblock;
-				goto out2;
-			}
-
-			ret = ext4_ext_convert_to_initialized(handle, inode,
-								path, iblock,
-								max_blocks);
-			if (ret <= 0) {
-				err = ret;
-				goto out2;
-			} else
-				allocated = ret;
-			goto outnew;
+			ret = ext4_ext_handle_uninitialized_extents(handle,
+					inode, iblock, max_blocks, path,
+					flags, allocated, bh_result, newblock);
+			return ret;
 		}
 	}
 
@@ -2986,9 +3286,21 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 	/* try to insert new extent into found leaf and return */
 	ext4_ext_store_pblock(&newex, newblock);
 	newex.ee_len = cpu_to_le16(ar.len);
-	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)  /* Mark uninitialized */
+	/* Mark uninitialized */
+	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT){
 		ext4_ext_mark_uninitialized(&newex);
-	err = ext4_ext_insert_extent(handle, inode, path, &newex);
+		/*
+		 * io_end structure was created for every async
+		 * direct IO write to the middle of the file.
+		 * To avoid unecessary convertion for every aio dio rewrite
+		 * to the mid of file, here we flag the IO that is really
+		 * need the convertion.
+		 *
+		 */
+		if (io && flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+			io->flag = DIO_AIO_UNWRITTEN;
+	}
+	err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
 	if (err) {
 		/* free data blocks we just allocated */
 		/* not a good idea to call discard here directly,
@@ -3002,7 +3314,6 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 	/* previous routine could use block we allocated */
 	newblock = ext_pblock(&newex);
 	allocated = ext4_ext_get_actual_len(&newex);
-outnew:
 	set_buffer_new(bh_result);
 
 	/* Cache only when it is _not_ an uninitialized extent */
@@ -3201,6 +3512,63 @@ retry:
 }
 
 /*
+ * This function convert a range of blocks to written extents
+ * The caller of this function will pass the start offset and the size.
+ * all unwritten extents within this range will be converted to
+ * written extents.
+ *
+ * This function is called from the direct IO end io call back
+ * function, to convert the fallocated extents after IO is completed.
+ */
+int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
+				    loff_t len)
+{
+	handle_t *handle;
+	ext4_lblk_t block;
+	unsigned int max_blocks;
+	int ret = 0;
+	int ret2 = 0;
+	struct buffer_head map_bh;
+	unsigned int credits, blkbits = inode->i_blkbits;
+
+	block = offset >> blkbits;
+	/*
+	 * We can't just convert len to max_blocks because
+	 * If blocksize = 4096 offset = 3072 and len = 2048
+	 */
+	max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
+							- block;
+	/*
+	 * credits to insert 1 extent into extent tree
+	 */
+	credits = ext4_chunk_trans_blocks(inode, max_blocks);
+	while (ret >= 0 && ret < max_blocks) {
+		block = block + ret;
+		max_blocks = max_blocks - ret;
+		handle = ext4_journal_start(inode, credits);
+		if (IS_ERR(handle)) {
+			ret = PTR_ERR(handle);
+			break;
+		}
+		map_bh.b_state = 0;
+		ret = ext4_get_blocks(handle, inode, block,
+				      max_blocks, &map_bh,
+				      EXT4_GET_BLOCKS_DIO_CONVERT_EXT);
+		if (ret <= 0) {
+			WARN_ON(ret <= 0);
+			printk(KERN_ERR "%s: ext4_ext_get_blocks "
+				    "returned error inode#%lu, block=%u, "
+				    "max_blocks=%u", __func__,
+				    inode->i_ino, block, max_blocks);
+		}
+		ext4_mark_inode_dirty(handle, inode);
+		ret2 = ext4_journal_stop(handle);
+		if (ret <= 0 || ret2 )
+			break;
+	}
+	return ret > 0 ? ret2 : ret;
+}
+/*
  * Callback function called for each extent to gather FIEMAP information.
  */
 static int ext4_ext_fiemap_cb(struct inode *inode, struct ext4_ext_path *path,
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 07475740b512..2b1531266ee2 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -44,6 +44,8 @@
  *
  * What we do is just kick off a commit and wait on it.  This will snapshot the
  * inode to disk.
+ *
+ * i_mutex lock is held when entering and exiting this function
  */
 
 int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
@@ -56,6 +58,9 @@ int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
 
 	trace_ext4_sync_file(file, dentry, datasync);
 
+	ret = flush_aio_dio_completed_IO(inode);
+	if (ret < 0)
+		goto out;
 	/*
 	 * data=writeback:
 	 *  The caller's filemap_fdatawrite()/wait will sync the data.
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 064746fad581..5c5bc5dafff8 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -37,6 +37,7 @@
 #include <linux/namei.h>
 #include <linux/uio.h>
 #include <linux/bio.h>
+#include <linux/workqueue.h>
 
 #include "ext4_jbd2.h"
 #include "xattr.h"
@@ -1145,6 +1146,64 @@ static int check_block_validity(struct inode *inode, const char *msg,
 }
 
 /*
+ * Return the number of contiguous dirty pages in a given inode
+ * starting at page frame idx.
+ */
+static pgoff_t ext4_num_dirty_pages(struct inode *inode, pgoff_t idx,
+				    unsigned int max_pages)
+{
+	struct address_space *mapping = inode->i_mapping;
+	pgoff_t	index;
+	struct pagevec pvec;
+	pgoff_t num = 0;
+	int i, nr_pages, done = 0;
+
+	if (max_pages == 0)
+		return 0;
+	pagevec_init(&pvec, 0);
+	while (!done) {
+		index = idx;
+		nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
+					      PAGECACHE_TAG_DIRTY,
+					      (pgoff_t)PAGEVEC_SIZE);
+		if (nr_pages == 0)
+			break;
+		for (i = 0; i < nr_pages; i++) {
+			struct page *page = pvec.pages[i];
+			struct buffer_head *bh, *head;
+
+			lock_page(page);
+			if (unlikely(page->mapping != mapping) ||
+			    !PageDirty(page) ||
+			    PageWriteback(page) ||
+			    page->index != idx) {
+				done = 1;
+				unlock_page(page);
+				break;
+			}
+			if (page_has_buffers(page)) {
+				bh = head = page_buffers(page);
+				do {
+					if (!buffer_delay(bh) &&
+					    !buffer_unwritten(bh))
+						done = 1;
+					bh = bh->b_this_page;
+				} while (!done && (bh != head));
+			}
+			unlock_page(page);
+			if (done)
+				break;
+			idx++;
+			num++;
+			if (num >= max_pages)
+				break;
+		}
+		pagevec_release(&pvec);
+	}
+	return num;
+}
+
+/*
  * The ext4_get_blocks() function tries to look up the requested blocks,
  * and returns if the blocks are already mapped.
  *
@@ -1175,6 +1234,9 @@ int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block,
 	clear_buffer_mapped(bh);
 	clear_buffer_unwritten(bh);
 
+	ext_debug("ext4_get_blocks(): inode %lu, flag %d, max_blocks %u,"
+		  "logical block %lu\n", inode->i_ino, flags, max_blocks,
+		  (unsigned long)block);
 	/*
 	 * Try to see if we can get the block without requesting a new
 	 * file system block.
@@ -1796,11 +1858,11 @@ repeat:
 
 	if (ext4_claim_free_blocks(sbi, total)) {
 		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+		vfs_dq_release_reservation_block(inode, total);
 		if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
 			yield();
 			goto repeat;
 		}
-		vfs_dq_release_reservation_block(inode, total);
 		return -ENOSPC;
 	}
 	EXT4_I(inode)->i_reserved_data_blocks += nrblocks;
@@ -2092,18 +2154,18 @@ static void ext4_da_block_invalidatepages(struct mpage_da_data *mpd,
 static void ext4_print_free_blocks(struct inode *inode)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
-	printk(KERN_EMERG "Total free blocks count %lld\n",
-			ext4_count_free_blocks(inode->i_sb));
-	printk(KERN_EMERG "Free/Dirty block details\n");
-	printk(KERN_EMERG "free_blocks=%lld\n",
-			(long long)percpu_counter_sum(&sbi->s_freeblocks_counter));
-	printk(KERN_EMERG "dirty_blocks=%lld\n",
-			(long long)percpu_counter_sum(&sbi->s_dirtyblocks_counter));
-	printk(KERN_EMERG "Block reservation details\n");
-	printk(KERN_EMERG "i_reserved_data_blocks=%u\n",
-			EXT4_I(inode)->i_reserved_data_blocks);
-	printk(KERN_EMERG "i_reserved_meta_blocks=%u\n",
-			EXT4_I(inode)->i_reserved_meta_blocks);
+	printk(KERN_CRIT "Total free blocks count %lld\n",
+	       ext4_count_free_blocks(inode->i_sb));
+	printk(KERN_CRIT "Free/Dirty block details\n");
+	printk(KERN_CRIT "free_blocks=%lld\n",
+	       (long long) percpu_counter_sum(&sbi->s_freeblocks_counter));
+	printk(KERN_CRIT "dirty_blocks=%lld\n",
+	       (long long) percpu_counter_sum(&sbi->s_dirtyblocks_counter));
+	printk(KERN_CRIT "Block reservation details\n");
+	printk(KERN_CRIT "i_reserved_data_blocks=%u\n",
+	       EXT4_I(inode)->i_reserved_data_blocks);
+	printk(KERN_CRIT "i_reserved_meta_blocks=%u\n",
+	       EXT4_I(inode)->i_reserved_meta_blocks);
 	return;
 }
 
@@ -2189,14 +2251,14 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd)
 		 * writepage and writepages will again try to write
 		 * the same.
 		 */
-		printk(KERN_EMERG "%s block allocation failed for inode %lu "
-				  "at logical offset %llu with max blocks "
-				  "%zd with error %d\n",
-				  __func__, mpd->inode->i_ino,
-				  (unsigned long long)next,
-				  mpd->b_size >> mpd->inode->i_blkbits, err);
-		printk(KERN_EMERG "This should not happen.!! "
-					"Data will be lost\n");
+		ext4_msg(mpd->inode->i_sb, KERN_CRIT,
+			 "delayed block allocation failed for inode %lu at "
+			 "logical offset %llu with max blocks %zd with "
+			 "error %d\n", mpd->inode->i_ino,
+			 (unsigned long long) next,
+			 mpd->b_size >> mpd->inode->i_blkbits, err);
+		printk(KERN_CRIT "This should not happen!!  "
+		       "Data will be lost\n");
 		if (err == -ENOSPC) {
 			ext4_print_free_blocks(mpd->inode);
 		}
@@ -2743,8 +2805,10 @@ static int ext4_da_writepages(struct address_space *mapping,
 	int no_nrwrite_index_update;
 	int pages_written = 0;
 	long pages_skipped;
+	unsigned int max_pages;
 	int range_cyclic, cycled = 1, io_done = 0;
-	int needed_blocks, ret = 0, nr_to_writebump = 0;
+	int needed_blocks, ret = 0;
+	long desired_nr_to_write, nr_to_writebump = 0;
 	loff_t range_start = wbc->range_start;
 	struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
 
@@ -2771,16 +2835,6 @@ static int ext4_da_writepages(struct address_space *mapping,
 	if (unlikely(sbi->s_mount_flags & EXT4_MF_FS_ABORTED))
 		return -EROFS;
 
-	/*
-	 * Make sure nr_to_write is >= sbi->s_mb_stream_request
-	 * This make sure small files blocks are allocated in
-	 * single attempt. This ensure that small files
-	 * get less fragmented.
-	 */
-	if (wbc->nr_to_write < sbi->s_mb_stream_request) {
-		nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write;
-		wbc->nr_to_write = sbi->s_mb_stream_request;
-	}
 	if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
 		range_whole = 1;
 
@@ -2795,6 +2849,36 @@ static int ext4_da_writepages(struct address_space *mapping,
 	} else
 		index = wbc->range_start >> PAGE_CACHE_SHIFT;
 
+	/*
+	 * This works around two forms of stupidity.  The first is in
+	 * the writeback code, which caps the maximum number of pages
+	 * written to be 1024 pages.  This is wrong on multiple
+	 * levels; different architectues have a different page size,
+	 * which changes the maximum amount of data which gets
+	 * written.  Secondly, 4 megabytes is way too small.  XFS
+	 * forces this value to be 16 megabytes by multiplying
+	 * nr_to_write parameter by four, and then relies on its
+	 * allocator to allocate larger extents to make them
+	 * contiguous.  Unfortunately this brings us to the second
+	 * stupidity, which is that ext4's mballoc code only allocates
+	 * at most 2048 blocks.  So we force contiguous writes up to
+	 * the number of dirty blocks in the inode, or
+	 * sbi->max_writeback_mb_bump whichever is smaller.
+	 */
+	max_pages = sbi->s_max_writeback_mb_bump << (20 - PAGE_CACHE_SHIFT);
+	if (!range_cyclic && range_whole)
+		desired_nr_to_write = wbc->nr_to_write * 8;
+	else
+		desired_nr_to_write = ext4_num_dirty_pages(inode, index,
+							   max_pages);
+	if (desired_nr_to_write > max_pages)
+		desired_nr_to_write = max_pages;
+
+	if (wbc->nr_to_write < desired_nr_to_write) {
+		nr_to_writebump = desired_nr_to_write - wbc->nr_to_write;
+		wbc->nr_to_write = desired_nr_to_write;
+	}
+
 	mpd.wbc = wbc;
 	mpd.inode = mapping->host;
 
@@ -2822,10 +2906,9 @@ retry:
 		handle = ext4_journal_start(inode, needed_blocks);
 		if (IS_ERR(handle)) {
 			ret = PTR_ERR(handle);
-			printk(KERN_CRIT "%s: jbd2_start: "
+			ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: "
 			       "%ld pages, ino %lu; err %d\n", __func__,
 				wbc->nr_to_write, inode->i_ino, ret);
-			dump_stack();
 			goto out_writepages;
 		}
 
@@ -2897,9 +2980,10 @@ retry:
 		goto retry;
 	}
 	if (pages_skipped != wbc->pages_skipped)
-		printk(KERN_EMERG "This should not happen leaving %s "
-				"with nr_to_write = %ld ret = %d\n",
-				__func__, wbc->nr_to_write, ret);
+		ext4_msg(inode->i_sb, KERN_CRIT,
+			 "This should not happen leaving %s "
+			 "with nr_to_write = %ld ret = %d\n",
+			 __func__, wbc->nr_to_write, ret);
 
 	/* Update index */
 	index += pages_written;
@@ -2914,7 +2998,8 @@ retry:
 out_writepages:
 	if (!no_nrwrite_index_update)
 		wbc->no_nrwrite_index_update = 0;
-	wbc->nr_to_write -= nr_to_writebump;
+	if (wbc->nr_to_write > nr_to_writebump)
+		wbc->nr_to_write -= nr_to_writebump;
 	wbc->range_start = range_start;
 	trace_ext4_da_writepages_result(inode, wbc, ret, pages_written);
 	return ret;
@@ -3272,6 +3357,8 @@ static int ext4_releasepage(struct page *page, gfp_t wait)
 }
 
 /*
+ * O_DIRECT for ext3 (or indirect map) based files
+ *
  * If the O_DIRECT write will extend the file then add this inode to the
  * orphan list.  So recovery will truncate it back to the original size
  * if the machine crashes during the write.
@@ -3280,7 +3367,7 @@ static int ext4_releasepage(struct page *page, gfp_t wait)
  * crashes then stale disk data _may_ be exposed inside the file. But current
  * VFS code falls back into buffered path in that case so we are safe.
  */
-static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
+static ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb,
 			      const struct iovec *iov, loff_t offset,
 			      unsigned long nr_segs)
 {
@@ -3291,6 +3378,7 @@ static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
 	ssize_t ret;
 	int orphan = 0;
 	size_t count = iov_length(iov, nr_segs);
+	int retries = 0;
 
 	if (rw == WRITE) {
 		loff_t final_size = offset + count;
@@ -3313,9 +3401,12 @@ static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
 		}
 	}
 
+retry:
 	ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
 				 offset, nr_segs,
 				 ext4_get_block, NULL);
+	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
+		goto retry;
 
 	if (orphan) {
 		int err;
@@ -3354,6 +3445,359 @@ out:
 	return ret;
 }
 
+/* Maximum number of blocks we map for direct IO at once. */
+
+static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock,
+		   struct buffer_head *bh_result, int create)
+{
+	handle_t *handle = NULL;
+	int ret = 0;
+	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
+	int dio_credits;
+
+	ext4_debug("ext4_get_block_dio_write: inode %lu, create flag %d\n",
+		   inode->i_ino, create);
+	/*
+	 * DIO VFS code passes create = 0 flag for write to
+	 * the middle of file. It does this to avoid block
+	 * allocation for holes, to prevent expose stale data
+	 * out when there is parallel buffered read (which does
+	 * not hold the i_mutex lock) while direct IO write has
+	 * not completed. DIO request on holes finally falls back
+	 * to buffered IO for this reason.
+	 *
+	 * For ext4 extent based file, since we support fallocate,
+	 * new allocated extent as uninitialized, for holes, we
+	 * could fallocate blocks for holes, thus parallel
+	 * buffered IO read will zero out the page when read on
+	 * a hole while parallel DIO write to the hole has not completed.
+	 *
+	 * when we come here, we know it's a direct IO write to
+	 * to the middle of file (<i_size)
+	 * so it's safe to override the create flag from VFS.
+	 */
+	create = EXT4_GET_BLOCKS_DIO_CREATE_EXT;
+
+	if (max_blocks > DIO_MAX_BLOCKS)
+		max_blocks = DIO_MAX_BLOCKS;
+	dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+	handle = ext4_journal_start(inode, dio_credits);
+	if (IS_ERR(handle)) {
+		ret = PTR_ERR(handle);
+		goto out;
+	}
+	ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result,
+			      create);
+	if (ret > 0) {
+		bh_result->b_size = (ret << inode->i_blkbits);
+		ret = 0;
+	}
+	ext4_journal_stop(handle);
+out:
+	return ret;
+}
+
+static void ext4_free_io_end(ext4_io_end_t *io)
+{
+	BUG_ON(!io);
+	iput(io->inode);
+	kfree(io);
+}
+static void dump_aio_dio_list(struct inode * inode)
+{
+#ifdef	EXT4_DEBUG
+	struct list_head *cur, *before, *after;
+	ext4_io_end_t *io, *io0, *io1;
+
+	if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){
+		ext4_debug("inode %lu aio dio list is empty\n", inode->i_ino);
+		return;
+	}
+
+	ext4_debug("Dump inode %lu aio_dio_completed_IO list \n", inode->i_ino);
+	list_for_each_entry(io, &EXT4_I(inode)->i_aio_dio_complete_list, list){
+		cur = &io->list;
+		before = cur->prev;
+		io0 = container_of(before, ext4_io_end_t, list);
+		after = cur->next;
+		io1 = container_of(after, ext4_io_end_t, list);
+
+		ext4_debug("io 0x%p from inode %lu,prev 0x%p,next 0x%p\n",
+			    io, inode->i_ino, io0, io1);
+	}
+#endif
+}
+
+/*
+ * check a range of space and convert unwritten extents to written.
+ */
+static int ext4_end_aio_dio_nolock(ext4_io_end_t *io)
+{
+	struct inode *inode = io->inode;
+	loff_t offset = io->offset;
+	size_t size = io->size;
+	int ret = 0;
+
+	ext4_debug("end_aio_dio_onlock: io 0x%p from inode %lu,list->next 0x%p,"
+		   "list->prev 0x%p\n",
+	           io, inode->i_ino, io->list.next, io->list.prev);
+
+	if (list_empty(&io->list))
+		return ret;
+
+	if (io->flag != DIO_AIO_UNWRITTEN)
+		return ret;
+
+	if (offset + size <= i_size_read(inode))
+		ret = ext4_convert_unwritten_extents(inode, offset, size);
+
+	if (ret < 0) {
+		printk(KERN_EMERG "%s: failed to convert unwritten"
+			"extents to written extents, error is %d"
+			" io is still on inode %lu aio dio list\n",
+                       __func__, ret, inode->i_ino);
+		return ret;
+	}
+
+	/* clear the DIO AIO unwritten flag */
+	io->flag = 0;
+	return ret;
+}
+/*
+ * work on completed aio dio IO, to convert unwritten extents to extents
+ */
+static void ext4_end_aio_dio_work(struct work_struct *work)
+{
+	ext4_io_end_t *io  = container_of(work, ext4_io_end_t, work);
+	struct inode *inode = io->inode;
+	int ret = 0;
+
+	mutex_lock(&inode->i_mutex);
+	ret = ext4_end_aio_dio_nolock(io);
+	if (ret >= 0) {
+		if (!list_empty(&io->list))
+			list_del_init(&io->list);
+		ext4_free_io_end(io);
+	}
+	mutex_unlock(&inode->i_mutex);
+}
+/*
+ * This function is called from ext4_sync_file().
+ *
+ * When AIO DIO IO is completed, the work to convert unwritten
+ * extents to written is queued on workqueue but may not get immediately
+ * scheduled. When fsync is called, we need to ensure the
+ * conversion is complete before fsync returns.
+ * The inode keeps track of a list of completed AIO from DIO path
+ * that might needs to do the conversion. This function walks through
+ * the list and convert the related unwritten extents to written.
+ */
+int flush_aio_dio_completed_IO(struct inode *inode)
+{
+	ext4_io_end_t *io;
+	int ret = 0;
+	int ret2 = 0;
+
+	if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list))
+		return ret;
+
+	dump_aio_dio_list(inode);
+	while (!list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){
+		io = list_entry(EXT4_I(inode)->i_aio_dio_complete_list.next,
+				ext4_io_end_t, list);
+		/*
+		 * Calling ext4_end_aio_dio_nolock() to convert completed
+		 * IO to written.
+		 *
+		 * When ext4_sync_file() is called, run_queue() may already
+		 * about to flush the work corresponding to this io structure.
+		 * It will be upset if it founds the io structure related
+		 * to the work-to-be schedule is freed.
+		 *
+		 * Thus we need to keep the io structure still valid here after
+		 * convertion finished. The io structure has a flag to
+		 * avoid double converting from both fsync and background work
+		 * queue work.
+		 */
+		ret = ext4_end_aio_dio_nolock(io);
+		if (ret < 0)
+			ret2 = ret;
+		else
+			list_del_init(&io->list);
+	}
+	return (ret2 < 0) ? ret2 : 0;
+}
+
+static ext4_io_end_t *ext4_init_io_end (struct inode *inode)
+{
+	ext4_io_end_t *io = NULL;
+
+	io = kmalloc(sizeof(*io), GFP_NOFS);
+
+	if (io) {
+		igrab(inode);
+		io->inode = inode;
+		io->flag = 0;
+		io->offset = 0;
+		io->size = 0;
+		io->error = 0;
+		INIT_WORK(&io->work, ext4_end_aio_dio_work);
+		INIT_LIST_HEAD(&io->list);
+	}
+
+	return io;
+}
+
+static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
+			    ssize_t size, void *private)
+{
+        ext4_io_end_t *io_end = iocb->private;
+	struct workqueue_struct *wq;
+
+	ext_debug("ext4_end_io_dio(): io_end 0x%p"
+		  "for inode %lu, iocb 0x%p, offset %llu, size %llu\n",
+ 		  iocb->private, io_end->inode->i_ino, iocb, offset,
+		  size);
+	/* if not async direct IO or dio with 0 bytes write, just return */
+	if (!io_end || !size)
+		return;
+
+	/* if not aio dio with unwritten extents, just free io and return */
+	if (io_end->flag != DIO_AIO_UNWRITTEN){
+		ext4_free_io_end(io_end);
+		iocb->private = NULL;
+		return;
+	}
+
+	io_end->offset = offset;
+	io_end->size = size;
+	wq = EXT4_SB(io_end->inode->i_sb)->dio_unwritten_wq;
+
+	/* queue the work to convert unwritten extents to written */
+	queue_work(wq, &io_end->work);
+
+	/* Add the io_end to per-inode completed aio dio list*/
+	list_add_tail(&io_end->list,
+		 &EXT4_I(io_end->inode)->i_aio_dio_complete_list);
+	iocb->private = NULL;
+}
+/*
+ * For ext4 extent files, ext4 will do direct-io write to holes,
+ * preallocated extents, and those write extend the file, no need to
+ * fall back to buffered IO.
+ *
+ * For holes, we fallocate those blocks, mark them as unintialized
+ * If those blocks were preallocated, we mark sure they are splited, but
+ * still keep the range to write as unintialized.
+ *
+ * The unwrritten extents will be converted to written when DIO is completed.
+ * For async direct IO, since the IO may still pending when return, we
+ * set up an end_io call back function, which will do the convertion
+ * when async direct IO completed.
+ *
+ * If the O_DIRECT write will extend the file then add this inode to the
+ * orphan list.  So recovery will truncate it back to the original size
+ * if the machine crashes during the write.
+ *
+ */
+static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb,
+			      const struct iovec *iov, loff_t offset,
+			      unsigned long nr_segs)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = file->f_mapping->host;
+	ssize_t ret;
+	size_t count = iov_length(iov, nr_segs);
+
+	loff_t final_size = offset + count;
+	if (rw == WRITE && final_size <= inode->i_size) {
+		/*
+ 		 * We could direct write to holes and fallocate.
+		 *
+ 		 * Allocated blocks to fill the hole are marked as uninitialized
+ 		 * to prevent paralel buffered read to expose the stale data
+ 		 * before DIO complete the data IO.
+		 *
+ 		 * As to previously fallocated extents, ext4 get_block
+ 		 * will just simply mark the buffer mapped but still
+ 		 * keep the extents uninitialized.
+ 		 *
+		 * for non AIO case, we will convert those unwritten extents
+		 * to written after return back from blockdev_direct_IO.
+		 *
+		 * for async DIO, the conversion needs to be defered when
+		 * the IO is completed. The ext4 end_io callback function
+		 * will be called to take care of the conversion work.
+		 * Here for async case, we allocate an io_end structure to
+		 * hook to the iocb.
+ 		 */
+		iocb->private = NULL;
+		EXT4_I(inode)->cur_aio_dio = NULL;
+		if (!is_sync_kiocb(iocb)) {
+			iocb->private = ext4_init_io_end(inode);
+			if (!iocb->private)
+				return -ENOMEM;
+			/*
+			 * we save the io structure for current async
+			 * direct IO, so that later ext4_get_blocks()
+			 * could flag the io structure whether there
+			 * is a unwritten extents needs to be converted
+			 * when IO is completed.
+			 */
+			EXT4_I(inode)->cur_aio_dio = iocb->private;
+		}
+
+		ret = blockdev_direct_IO(rw, iocb, inode,
+					 inode->i_sb->s_bdev, iov,
+					 offset, nr_segs,
+					 ext4_get_block_dio_write,
+					 ext4_end_io_dio);
+		if (iocb->private)
+			EXT4_I(inode)->cur_aio_dio = NULL;
+		/*
+		 * The io_end structure takes a reference to the inode,
+		 * that structure needs to be destroyed and the
+		 * reference to the inode need to be dropped, when IO is
+		 * complete, even with 0 byte write, or failed.
+		 *
+		 * In the successful AIO DIO case, the io_end structure will be
+		 * desctroyed and the reference to the inode will be dropped
+		 * after the end_io call back function is called.
+		 *
+		 * In the case there is 0 byte write, or error case, since
+		 * VFS direct IO won't invoke the end_io call back function,
+		 * we need to free the end_io structure here.
+		 */
+		if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) {
+			ext4_free_io_end(iocb->private);
+			iocb->private = NULL;
+		} else if (ret > 0)
+			/*
+			 * for non AIO case, since the IO is already
+			 * completed, we could do the convertion right here
+			 */
+			ret = ext4_convert_unwritten_extents(inode,
+								offset, ret);
+		return ret;
+	}
+
+	/* for write the the end of file case, we fall back to old way */
+	return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs);
+}
+
+static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
+			      const struct iovec *iov, loff_t offset,
+			      unsigned long nr_segs)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = file->f_mapping->host;
+
+	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
+		return ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs);
+
+	return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs);
+}
+
 /*
  * Pages can be marked dirty completely asynchronously from ext4's journalling
  * activity.  By filemap_sync_pte(), try_to_unmap_one(), etc.  We cannot do
@@ -4551,8 +4995,7 @@ static int ext4_inode_blocks_set(handle_t *handle,
  */
 static int ext4_do_update_inode(handle_t *handle,
 				struct inode *inode,
-				struct ext4_iloc *iloc,
-				int do_sync)
+				struct ext4_iloc *iloc)
 {
 	struct ext4_inode *raw_inode = ext4_raw_inode(iloc);
 	struct ext4_inode_info *ei = EXT4_I(inode);
@@ -4653,22 +5096,10 @@ static int ext4_do_update_inode(handle_t *handle,
 		raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize);
 	}
 
-	/*
-	 * If we're not using a journal and we were called from
-	 * ext4_write_inode() to sync the inode (making do_sync true),
-	 * we can just use sync_dirty_buffer() directly to do our dirty
-	 * work.  Testing s_journal here is a bit redundant but it's
-	 * worth it to avoid potential future trouble.
-	 */
-	if (EXT4_SB(inode->i_sb)->s_journal == NULL && do_sync) {
-		BUFFER_TRACE(bh, "call sync_dirty_buffer");
-		sync_dirty_buffer(bh);
-	} else {
-		BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
-		rc = ext4_handle_dirty_metadata(handle, inode, bh);
-		if (!err)
-			err = rc;
-	}
+	BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
+	rc = ext4_handle_dirty_metadata(handle, inode, bh);
+	if (!err)
+		err = rc;
 	ei->i_state &= ~EXT4_STATE_NEW;
 
 out_brelse:
@@ -4736,8 +5167,16 @@ int ext4_write_inode(struct inode *inode, int wait)
 		err = ext4_get_inode_loc(inode, &iloc);
 		if (err)
 			return err;
-		err = ext4_do_update_inode(EXT4_NOJOURNAL_HANDLE,
-					   inode, &iloc, wait);
+		if (wait)
+			sync_dirty_buffer(iloc.bh);
+		if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) {
+			ext4_error(inode->i_sb, __func__,
+				   "IO error syncing inode, "
+				   "inode=%lu, block=%llu",
+				   inode->i_ino,
+				   (unsigned long long)iloc.bh->b_blocknr);
+			err = -EIO;
+		}
 	}
 	return err;
 }
@@ -5033,7 +5472,7 @@ int ext4_mark_iloc_dirty(handle_t *handle,
 	get_bh(iloc->bh);
 
 	/* ext4_do_update_inode() does jbd2_journal_dirty_metadata */
-	err = ext4_do_update_inode(handle, inode, iloc, 0);
+	err = ext4_do_update_inode(handle, inode, iloc);
 	put_bh(iloc->bh);
 	return err;
 }
@@ -5177,27 +5616,14 @@ int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode)
  */
 void ext4_dirty_inode(struct inode *inode)
 {
-	handle_t *current_handle = ext4_journal_current_handle();
 	handle_t *handle;
 
-	if (!ext4_handle_valid(current_handle)) {
-		ext4_mark_inode_dirty(current_handle, inode);
-		return;
-	}
-
 	handle = ext4_journal_start(inode, 2);
 	if (IS_ERR(handle))
 		goto out;
-	if (current_handle &&
-		current_handle->h_transaction != handle->h_transaction) {
-		/* This task has a transaction open against a different fs */
-		printk(KERN_EMERG "%s: transactions do not match!\n",
-		       __func__);
-	} else {
-		jbd_debug(5, "marking dirty.  outer handle=%p\n",
-				current_handle);
-		ext4_mark_inode_dirty(handle, inode);
-	}
+
+	ext4_mark_inode_dirty(handle, inode);
+
 	ext4_journal_stop(handle);
 out:
 	return;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index e9c61896d605..bba12824defa 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2096,207 +2096,6 @@ out:
 	return err;
 }
 
-#ifdef EXT4_MB_HISTORY
-struct ext4_mb_proc_session {
-	struct ext4_mb_history *history;
-	struct super_block *sb;
-	int start;
-	int max;
-};
-
-static void *ext4_mb_history_skip_empty(struct ext4_mb_proc_session *s,
-					struct ext4_mb_history *hs,
-					int first)
-{
-	if (hs == s->history + s->max)
-		hs = s->history;
-	if (!first && hs == s->history + s->start)
-		return NULL;
-	while (hs->orig.fe_len == 0) {
-		hs++;
-		if (hs == s->history + s->max)
-			hs = s->history;
-		if (hs == s->history + s->start)
-			return NULL;
-	}
-	return hs;
-}
-
-static void *ext4_mb_seq_history_start(struct seq_file *seq, loff_t *pos)
-{
-	struct ext4_mb_proc_session *s = seq->private;
-	struct ext4_mb_history *hs;
-	int l = *pos;
-
-	if (l == 0)
-		return SEQ_START_TOKEN;
-	hs = ext4_mb_history_skip_empty(s, s->history + s->start, 1);
-	if (!hs)
-		return NULL;
-	while (--l && (hs = ext4_mb_history_skip_empty(s, ++hs, 0)) != NULL);
-	return hs;
-}
-
-static void *ext4_mb_seq_history_next(struct seq_file *seq, void *v,
-				      loff_t *pos)
-{
-	struct ext4_mb_proc_session *s = seq->private;
-	struct ext4_mb_history *hs = v;
-
-	++*pos;
-	if (v == SEQ_START_TOKEN)
-		return ext4_mb_history_skip_empty(s, s->history + s->start, 1);
-	else
-		return ext4_mb_history_skip_empty(s, ++hs, 0);
-}
-
-static int ext4_mb_seq_history_show(struct seq_file *seq, void *v)
-{
-	char buf[25], buf2[25], buf3[25], *fmt;
-	struct ext4_mb_history *hs = v;
-
-	if (v == SEQ_START_TOKEN) {
-		seq_printf(seq, "%-5s %-8s %-23s %-23s %-23s %-5s "
-				"%-5s %-2s %-6s %-5s %-5s %-6s\n",
-			  "pid", "inode", "original", "goal", "result", "found",
-			   "grps", "cr", "flags", "merge", "tail", "broken");
-		return 0;
-	}
-
-	if (hs->op == EXT4_MB_HISTORY_ALLOC) {
-		fmt = "%-5u %-8u %-23s %-23s %-23s %-5u %-5u %-2u "
-			"0x%04x %-5s %-5u %-6u\n";
-		sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len,
-			hs->result.fe_logical);
-		sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group,
-			hs->orig.fe_start, hs->orig.fe_len,
-			hs->orig.fe_logical);
-		sprintf(buf3, "%u/%d/%u@%u", hs->goal.fe_group,
-			hs->goal.fe_start, hs->goal.fe_len,
-			hs->goal.fe_logical);
-		seq_printf(seq, fmt, hs->pid, hs->ino, buf, buf3, buf2,
-				hs->found, hs->groups, hs->cr, hs->flags,
-				hs->merged ? "M" : "", hs->tail,
-				hs->buddy ? 1 << hs->buddy : 0);
-	} else if (hs->op == EXT4_MB_HISTORY_PREALLOC) {
-		fmt = "%-5u %-8u %-23s %-23s %-23s\n";
-		sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len,
-			hs->result.fe_logical);
-		sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group,
-			hs->orig.fe_start, hs->orig.fe_len,
-			hs->orig.fe_logical);
-		seq_printf(seq, fmt, hs->pid, hs->ino, buf, "", buf2);
-	} else if (hs->op == EXT4_MB_HISTORY_DISCARD) {
-		sprintf(buf2, "%u/%d/%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len);
-		seq_printf(seq, "%-5u %-8u %-23s discard\n",
-				hs->pid, hs->ino, buf2);
-	} else if (hs->op == EXT4_MB_HISTORY_FREE) {
-		sprintf(buf2, "%u/%d/%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len);
-		seq_printf(seq, "%-5u %-8u %-23s free\n",
-				hs->pid, hs->ino, buf2);
-	}
-	return 0;
-}
-
-static void ext4_mb_seq_history_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations ext4_mb_seq_history_ops = {
-	.start  = ext4_mb_seq_history_start,
-	.next   = ext4_mb_seq_history_next,
-	.stop   = ext4_mb_seq_history_stop,
-	.show   = ext4_mb_seq_history_show,
-};
-
-static int ext4_mb_seq_history_open(struct inode *inode, struct file *file)
-{
-	struct super_block *sb = PDE(inode)->data;
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	struct ext4_mb_proc_session *s;
-	int rc;
-	int size;
-
-	if (unlikely(sbi->s_mb_history == NULL))
-		return -ENOMEM;
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
-	if (s == NULL)
-		return -ENOMEM;
-	s->sb = sb;
-	size = sizeof(struct ext4_mb_history) * sbi->s_mb_history_max;
-	s->history = kmalloc(size, GFP_KERNEL);
-	if (s->history == NULL) {
-		kfree(s);
-		return -ENOMEM;
-	}
-
-	spin_lock(&sbi->s_mb_history_lock);
-	memcpy(s->history, sbi->s_mb_history, size);
-	s->max = sbi->s_mb_history_max;
-	s->start = sbi->s_mb_history_cur % s->max;
-	spin_unlock(&sbi->s_mb_history_lock);
-
-	rc = seq_open(file, &ext4_mb_seq_history_ops);
-	if (rc == 0) {
-		struct seq_file *m = (struct seq_file *)file->private_data;
-		m->private = s;
-	} else {
-		kfree(s->history);
-		kfree(s);
-	}
-	return rc;
-
-}
-
-static int ext4_mb_seq_history_release(struct inode *inode, struct file *file)
-{
-	struct seq_file *seq = (struct seq_file *)file->private_data;
-	struct ext4_mb_proc_session *s = seq->private;
-	kfree(s->history);
-	kfree(s);
-	return seq_release(inode, file);
-}
-
-static ssize_t ext4_mb_seq_history_write(struct file *file,
-				const char __user *buffer,
-				size_t count, loff_t *ppos)
-{
-	struct seq_file *seq = (struct seq_file *)file->private_data;
-	struct ext4_mb_proc_session *s = seq->private;
-	struct super_block *sb = s->sb;
-	char str[32];
-	int value;
-
-	if (count >= sizeof(str)) {
-		printk(KERN_ERR "EXT4-fs: %s string too long, max %u bytes\n",
-				"mb_history", (int)sizeof(str));
-		return -EOVERFLOW;
-	}
-
-	if (copy_from_user(str, buffer, count))
-		return -EFAULT;
-
-	value = simple_strtol(str, NULL, 0);
-	if (value < 0)
-		return -ERANGE;
-	EXT4_SB(sb)->s_mb_history_filter = value;
-
-	return count;
-}
-
-static const struct file_operations ext4_mb_seq_history_fops = {
-	.owner		= THIS_MODULE,
-	.open		= ext4_mb_seq_history_open,
-	.read		= seq_read,
-	.write		= ext4_mb_seq_history_write,
-	.llseek		= seq_lseek,
-	.release	= ext4_mb_seq_history_release,
-};
-
 static void *ext4_mb_seq_groups_start(struct seq_file *seq, loff_t *pos)
 {
 	struct super_block *sb = seq->private;
@@ -2396,82 +2195,6 @@ static const struct file_operations ext4_mb_seq_groups_fops = {
 	.release	= seq_release,
 };
 
-static void ext4_mb_history_release(struct super_block *sb)
-{
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
-
-	if (sbi->s_proc != NULL) {
-		remove_proc_entry("mb_groups", sbi->s_proc);
-		if (sbi->s_mb_history_max)
-			remove_proc_entry("mb_history", sbi->s_proc);
-	}
-	kfree(sbi->s_mb_history);
-}
-
-static void ext4_mb_history_init(struct super_block *sb)
-{
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	int i;
-
-	if (sbi->s_proc != NULL) {
-		if (sbi->s_mb_history_max)
-			proc_create_data("mb_history", S_IRUGO, sbi->s_proc,
-					 &ext4_mb_seq_history_fops, sb);
-		proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
-				 &ext4_mb_seq_groups_fops, sb);
-	}
-
-	sbi->s_mb_history_cur = 0;
-	spin_lock_init(&sbi->s_mb_history_lock);
-	i = sbi->s_mb_history_max * sizeof(struct ext4_mb_history);
-	sbi->s_mb_history = i ? kzalloc(i, GFP_KERNEL) : NULL;
-	/* if we can't allocate history, then we simple won't use it */
-}
-
-static noinline_for_stack void
-ext4_mb_store_history(struct ext4_allocation_context *ac)
-{
-	struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
-	struct ext4_mb_history h;
-
-	if (sbi->s_mb_history == NULL)
-		return;
-
-	if (!(ac->ac_op & sbi->s_mb_history_filter))
-		return;
-
-	h.op = ac->ac_op;
-	h.pid = current->pid;
-	h.ino = ac->ac_inode ? ac->ac_inode->i_ino : 0;
-	h.orig = ac->ac_o_ex;
-	h.result = ac->ac_b_ex;
-	h.flags = ac->ac_flags;
-	h.found = ac->ac_found;
-	h.groups = ac->ac_groups_scanned;
-	h.cr = ac->ac_criteria;
-	h.tail = ac->ac_tail;
-	h.buddy = ac->ac_buddy;
-	h.merged = 0;
-	if (ac->ac_op == EXT4_MB_HISTORY_ALLOC) {
-		if (ac->ac_g_ex.fe_start == ac->ac_b_ex.fe_start &&
-				ac->ac_g_ex.fe_group == ac->ac_b_ex.fe_group)
-			h.merged = 1;
-		h.goal = ac->ac_g_ex;
-		h.result = ac->ac_f_ex;
-	}
-
-	spin_lock(&sbi->s_mb_history_lock);
-	memcpy(sbi->s_mb_history + sbi->s_mb_history_cur, &h, sizeof(h));
-	if (++sbi->s_mb_history_cur >= sbi->s_mb_history_max)
-		sbi->s_mb_history_cur = 0;
-	spin_unlock(&sbi->s_mb_history_lock);
-}
-
-#else
-#define ext4_mb_history_release(sb)
-#define ext4_mb_history_init(sb)
-#endif
-
 
 /* Create and initialize ext4_group_info data for the given group. */
 int ext4_mb_add_groupinfo(struct super_block *sb, ext4_group_t group,
@@ -2690,7 +2413,6 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery)
 	sbi->s_mb_stats = MB_DEFAULT_STATS;
 	sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD;
 	sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS;
-	sbi->s_mb_history_filter = EXT4_MB_HISTORY_DEFAULT;
 	sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC;
 
 	sbi->s_locality_groups = alloc_percpu(struct ext4_locality_group);
@@ -2708,12 +2430,12 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery)
 		spin_lock_init(&lg->lg_prealloc_lock);
 	}
 
-	ext4_mb_history_init(sb);
+	if (sbi->s_proc)
+		proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
+				 &ext4_mb_seq_groups_fops, sb);
 
 	if (sbi->s_journal)
 		sbi->s_journal->j_commit_callback = release_blocks_on_commit;
-
-	printk(KERN_INFO "EXT4-fs: mballoc enabled\n");
 	return 0;
 }
 
@@ -2790,7 +2512,8 @@ int ext4_mb_release(struct super_block *sb)
 	}
 
 	free_percpu(sbi->s_locality_groups);
-	ext4_mb_history_release(sb);
+	if (sbi->s_proc)
+		remove_proc_entry("mb_groups", sbi->s_proc);
 
 	return 0;
 }
@@ -3276,7 +2999,10 @@ static void ext4_mb_collect_stats(struct ext4_allocation_context *ac)
 			atomic_inc(&sbi->s_bal_breaks);
 	}
 
-	ext4_mb_store_history(ac);
+	if (ac->ac_op == EXT4_MB_HISTORY_ALLOC)
+		trace_ext4_mballoc_alloc(ac);
+	else
+		trace_ext4_mballoc_prealloc(ac);
 }
 
 /*
@@ -3776,7 +3502,6 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh,
 	if (ac) {
 		ac->ac_sb = sb;
 		ac->ac_inode = pa->pa_inode;
-		ac->ac_op = EXT4_MB_HISTORY_DISCARD;
 	}
 
 	while (bit < end) {
@@ -3796,7 +3521,7 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh,
 			ac->ac_b_ex.fe_start = bit;
 			ac->ac_b_ex.fe_len = next - bit;
 			ac->ac_b_ex.fe_logical = 0;
-			ext4_mb_store_history(ac);
+			trace_ext4_mballoc_discard(ac);
 		}
 
 		trace_ext4_mb_release_inode_pa(ac, pa, grp_blk_start + bit,
@@ -3831,9 +3556,6 @@ ext4_mb_release_group_pa(struct ext4_buddy *e4b,
 	ext4_group_t group;
 	ext4_grpblk_t bit;
 
-	if (ac)
-		ac->ac_op = EXT4_MB_HISTORY_DISCARD;
-
 	trace_ext4_mb_release_group_pa(ac, pa);
 	BUG_ON(pa->pa_deleted == 0);
 	ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
@@ -3848,7 +3570,7 @@ ext4_mb_release_group_pa(struct ext4_buddy *e4b,
 		ac->ac_b_ex.fe_start = bit;
 		ac->ac_b_ex.fe_len = pa->pa_len;
 		ac->ac_b_ex.fe_logical = 0;
-		ext4_mb_store_history(ac);
+		trace_ext4_mballoc_discard(ac);
 	}
 
 	return 0;
@@ -4189,7 +3911,6 @@ static void ext4_mb_group_or_file(struct ext4_allocation_context *ac)
 	size = ac->ac_o_ex.fe_logical + ac->ac_o_ex.fe_len;
 	isize = (i_size_read(ac->ac_inode) + ac->ac_sb->s_blocksize - 1)
 		>> bsbits;
-	size = max(size, isize);
 
 	if ((size == isize) &&
 	    !ext4_fs_is_busy(sbi) &&
@@ -4199,6 +3920,7 @@ static void ext4_mb_group_or_file(struct ext4_allocation_context *ac)
 	}
 
 	/* don't use group allocation for large files */
+	size = max(size, isize);
 	if (size >= sbi->s_mb_stream_request) {
 		ac->ac_flags |= EXT4_MB_STREAM_ALLOC;
 		return;
@@ -4739,7 +4461,6 @@ void ext4_mb_free_blocks(handle_t *handle, struct inode *inode,
 
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
 	if (ac) {
-		ac->ac_op = EXT4_MB_HISTORY_FREE;
 		ac->ac_inode = inode;
 		ac->ac_sb = sb;
 	}
@@ -4806,7 +4527,7 @@ do_more:
 		ac->ac_b_ex.fe_group = block_group;
 		ac->ac_b_ex.fe_start = bit;
 		ac->ac_b_ex.fe_len = count;
-		ext4_mb_store_history(ac);
+		trace_ext4_mballoc_free(ac);
 	}
 
 	err = ext4_mb_load_buddy(sb, block_group, &e4b);
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index 188d3d709b24..0ca811061bc7 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -52,18 +52,8 @@ extern u8 mb_enable_debug;
 #define mb_debug(n, fmt, a...)
 #endif
 
-/*
- * with EXT4_MB_HISTORY mballoc stores last N allocations in memory
- * and you can monitor it in /proc/fs/ext4/<dev>/mb_history
- */
-#define EXT4_MB_HISTORY
 #define EXT4_MB_HISTORY_ALLOC		1	/* allocation */
 #define EXT4_MB_HISTORY_PREALLOC	2	/* preallocated blocks used */
-#define EXT4_MB_HISTORY_DISCARD		4	/* preallocation discarded */
-#define EXT4_MB_HISTORY_FREE		8	/* free */
-
-#define EXT4_MB_HISTORY_DEFAULT		(EXT4_MB_HISTORY_ALLOC | \
-					 EXT4_MB_HISTORY_PREALLOC)
 
 /*
  * How long mballoc can look for a best extent (in found extents)
@@ -84,7 +74,7 @@ extern u8 mb_enable_debug;
  * with 'ext4_mb_stats' allocator will collect stats that will be
  * shown at umount. The collecting costs though!
  */
-#define MB_DEFAULT_STATS		1
+#define MB_DEFAULT_STATS		0
 
 /*
  * files smaller than MB_DEFAULT_STREAM_THRESHOLD are served
@@ -217,22 +207,6 @@ struct ext4_allocation_context {
 #define AC_STATUS_FOUND		2
 #define AC_STATUS_BREAK		3
 
-struct ext4_mb_history {
-	struct ext4_free_extent orig;	/* orig allocation */
-	struct ext4_free_extent goal;	/* goal allocation */
-	struct ext4_free_extent result;	/* result allocation */
-	unsigned pid;
-	unsigned ino;
-	__u16 found;	/* how many extents have been found */
-	__u16 groups;	/* how many groups have been scanned */
-	__u16 tail;	/* what tail broke some buddy */
-	__u16 buddy;	/* buddy the tail ^^^ broke */
-	__u16 flags;
-	__u8 cr:3;	/* which phase the result extent was found at */
-	__u8 op:4;
-	__u8 merged:1;
-};
-
 struct ext4_buddy {
 	struct page *bd_buddy_page;
 	void *bd_buddy;
@@ -247,13 +221,6 @@ struct ext4_buddy {
 #define EXT4_MB_BITMAP(e4b)	((e4b)->bd_bitmap)
 #define EXT4_MB_BUDDY(e4b)	((e4b)->bd_buddy)
 
-#ifndef EXT4_MB_HISTORY
-static inline void ext4_mb_store_history(struct ext4_allocation_context *ac)
-{
-	return;
-}
-#endif
-
 #define in_range(b, first, len)	((b) >= (first) && (b) <= (first) + (len) - 1)
 
 static inline ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb,
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index bf519f239ae6..a93d5b80f3e2 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -75,7 +75,7 @@ static int finish_range(handle_t *handle, struct inode *inode,
 				goto err_out;
 		}
 	}
-	retval = ext4_ext_insert_extent(handle, inode, path, &newext);
+	retval = ext4_ext_insert_extent(handle, inode, path, &newext, 0);
 err_out:
 	if (path) {
 		ext4_ext_drop_refs(path);
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index c07a2915e40b..25b6b1457360 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -322,7 +322,7 @@ mext_insert_across_blocks(handle_t *handle, struct inode *orig_inode,
 			goto out;
 
 		if (ext4_ext_insert_extent(handle, orig_inode,
-					orig_path, new_ext))
+					orig_path, new_ext, 0))
 			goto out;
 	}
 
@@ -333,7 +333,7 @@ mext_insert_across_blocks(handle_t *handle, struct inode *orig_inode,
 			goto out;
 
 		if (ext4_ext_insert_extent(handle, orig_inode,
-					   orig_path, end_ext))
+					   orig_path, end_ext, 0))
 			goto out;
 	}
 out:
@@ -1001,14 +1001,6 @@ mext_check_arguments(struct inode *orig_inode,
 		return -EINVAL;
 	}
 
-	/* orig and donor should be different file */
-	if (orig_inode->i_ino == donor_inode->i_ino) {
-		ext4_debug("ext4 move extent: The argument files should not "
-			"be same file [ino:orig %lu, donor %lu]\n",
-			orig_inode->i_ino, donor_inode->i_ino);
-		return -EINVAL;
-	}
-
 	/* Ext4 move extent supports only extent based file */
 	if (!(EXT4_I(orig_inode)->i_flags & EXT4_EXTENTS_FL)) {
 		ext4_debug("ext4 move extent: orig file is not extents "
@@ -1232,6 +1224,14 @@ ext4_move_extents(struct file *o_filp, struct file *d_filp,
 	int block_len_in_page;
 	int uninit;
 
+	/* orig and donor should be different file */
+	if (orig_inode->i_ino == donor_inode->i_ino) {
+		ext4_debug("ext4 move extent: The argument files should not "
+			"be same file [ino:orig %lu, donor %lu]\n",
+			orig_inode->i_ino, donor_inode->i_ino);
+		return -EINVAL;
+	}
+
 	/* protect orig and donor against a truncate */
 	ret1 = mext_inode_double_lock(orig_inode, donor_inode);
 	if (ret1 < 0)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 42f81d285cd5..7c8fe80bacdd 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2076,7 +2076,8 @@ int ext4_orphan_del(handle_t *handle, struct inode *inode)
 	struct ext4_iloc iloc;
 	int err = 0;
 
-	if (!ext4_handle_valid(handle))
+	/* ext4_handle_valid() assumes a valid handle_t pointer */
+	if (handle && !ext4_handle_valid(handle))
 		return 0;
 
 	mutex_lock(&EXT4_SB(inode->i_sb)->s_orphan_lock);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index df539ba27779..312211ee05af 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -50,13 +50,6 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/ext4.h>
 
-static int default_mb_history_length = 1000;
-
-module_param_named(default_mb_history_length, default_mb_history_length,
-		   int, 0644);
-MODULE_PARM_DESC(default_mb_history_length,
-		 "Default number of entries saved for mb_history");
-
 struct proc_dir_entry *ext4_proc_root;
 static struct kset *ext4_kset;
 
@@ -189,6 +182,36 @@ void ext4_itable_unused_set(struct super_block *sb,
 		bg->bg_itable_unused_hi = cpu_to_le16(count >> 16);
 }
 
+
+/* Just increment the non-pointer handle value */
+static handle_t *ext4_get_nojournal(void)
+{
+	handle_t *handle = current->journal_info;
+	unsigned long ref_cnt = (unsigned long)handle;
+
+	BUG_ON(ref_cnt >= EXT4_NOJOURNAL_MAX_REF_COUNT);
+
+	ref_cnt++;
+	handle = (handle_t *)ref_cnt;
+
+	current->journal_info = handle;
+	return handle;
+}
+
+
+/* Decrement the non-pointer handle value */
+static void ext4_put_nojournal(handle_t *handle)
+{
+	unsigned long ref_cnt = (unsigned long)handle;
+
+	BUG_ON(ref_cnt == 0);
+
+	ref_cnt--;
+	handle = (handle_t *)ref_cnt;
+
+	current->journal_info = handle;
+}
+
 /*
  * Wrappers for jbd2_journal_start/end.
  *
@@ -215,11 +238,7 @@ handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks)
 		}
 		return jbd2_journal_start(journal, nblocks);
 	}
-	/*
-	 * We're not journaling, return the appropriate indication.
-	 */
-	current->journal_info = EXT4_NOJOURNAL_HANDLE;
-	return current->journal_info;
+	return ext4_get_nojournal();
 }
 
 /*
@@ -235,11 +254,7 @@ int __ext4_journal_stop(const char *where, handle_t *handle)
 	int rc;
 
 	if (!ext4_handle_valid(handle)) {
-		/*
-		 * Do this here since we don't call jbd2_journal_stop() in
-		 * no-journal mode.
-		 */
-		current->journal_info = NULL;
+		ext4_put_nojournal(handle);
 		return 0;
 	}
 	sb = handle->h_transaction->t_journal->j_private;
@@ -580,6 +595,9 @@ static void ext4_put_super(struct super_block *sb)
 	struct ext4_super_block *es = sbi->s_es;
 	int i, err;
 
+	flush_workqueue(sbi->dio_unwritten_wq);
+	destroy_workqueue(sbi->dio_unwritten_wq);
+
 	lock_super(sb);
 	lock_kernel();
 	if (sb->s_dirt)
@@ -684,6 +702,8 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 	ei->i_allocated_meta_blocks = 0;
 	ei->i_delalloc_reserved_flag = 0;
 	spin_lock_init(&(ei->i_block_reservation_lock));
+	INIT_LIST_HEAD(&ei->i_aio_dio_complete_list);
+	ei->cur_aio_dio = NULL;
 
 	return &ei->vfs_inode;
 }
@@ -1052,7 +1072,7 @@ enum {
 	Opt_journal_update, Opt_journal_dev,
 	Opt_journal_checksum, Opt_journal_async_commit,
 	Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
-	Opt_data_err_abort, Opt_data_err_ignore, Opt_mb_history_length,
+	Opt_data_err_abort, Opt_data_err_ignore,
 	Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
 	Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
 	Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, Opt_resize,
@@ -1099,7 +1119,6 @@ static const match_table_t tokens = {
 	{Opt_data_writeback, "data=writeback"},
 	{Opt_data_err_abort, "data_err=abort"},
 	{Opt_data_err_ignore, "data_err=ignore"},
-	{Opt_mb_history_length, "mb_history_length=%u"},
 	{Opt_offusrjquota, "usrjquota="},
 	{Opt_usrjquota, "usrjquota=%s"},
 	{Opt_offgrpjquota, "grpjquota="},
@@ -1340,13 +1359,6 @@ static int parse_options(char *options, struct super_block *sb,
 		case Opt_data_err_ignore:
 			clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
 			break;
-		case Opt_mb_history_length:
-			if (match_int(&args[0], &option))
-				return 0;
-			if (option < 0)
-				return 0;
-			sbi->s_mb_history_max = option;
-			break;
 #ifdef CONFIG_QUOTA
 		case Opt_usrjquota:
 			qtype = USRQUOTA;
@@ -1646,13 +1658,6 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
 			EXT4_INODES_PER_GROUP(sb),
 			sbi->s_mount_opt);
 
-	if (EXT4_SB(sb)->s_journal) {
-		ext4_msg(sb, KERN_INFO, "%s journal on %s",
-		       EXT4_SB(sb)->s_journal->j_inode ? "internal" :
-		       "external", EXT4_SB(sb)->s_journal->j_devname);
-	} else {
-		ext4_msg(sb, KERN_INFO, "no journal");
-	}
 	return res;
 }
 
@@ -2197,6 +2202,7 @@ EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan);
 EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
 EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
 EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
+EXT4_RW_ATTR_SBI_UI(max_writeback_mb_bump, s_max_writeback_mb_bump);
 
 static struct attribute *ext4_attrs[] = {
 	ATTR_LIST(delayed_allocation_blocks),
@@ -2210,6 +2216,7 @@ static struct attribute *ext4_attrs[] = {
 	ATTR_LIST(mb_order2_req),
 	ATTR_LIST(mb_stream_req),
 	ATTR_LIST(mb_group_prealloc),
+	ATTR_LIST(max_writeback_mb_bump),
 	NULL,
 };
 
@@ -2413,7 +2420,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	sbi->s_commit_interval = JBD2_DEFAULT_MAX_COMMIT_AGE * HZ;
 	sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME;
 	sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME;
-	sbi->s_mb_history_max = default_mb_history_length;
 
 	set_opt(sbi->s_mount_opt, BARRIER);
 
@@ -2679,6 +2685,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	sbi->s_stripe = ext4_get_stripe_size(sbi);
+	sbi->s_max_writeback_mb_bump = 128;
 
 	/*
 	 * set up enough so that it can read an inode
@@ -2798,6 +2805,12 @@ no_journal:
 			clear_opt(sbi->s_mount_opt, NOBH);
 		}
 	}
+	EXT4_SB(sb)->dio_unwritten_wq = create_workqueue("ext4-dio-unwritten");
+	if (!EXT4_SB(sb)->dio_unwritten_wq) {
+		printk(KERN_ERR "EXT4-fs: failed to create DIO workqueue\n");
+		goto failed_mount_wq;
+	}
+
 	/*
 	 * The jbd2_journal_load will have done any necessary log recovery,
 	 * so we can safely mount the rest of the filesystem now.
@@ -2849,12 +2862,12 @@ no_journal:
 			 "available");
 	}
 
-	if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
+	if (test_opt(sb, DELALLOC) &&
+	    (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)) {
 		ext4_msg(sb, KERN_WARNING, "Ignoring delalloc option - "
 			 "requested data journaling mode");
 		clear_opt(sbi->s_mount_opt, DELALLOC);
-	} else if (test_opt(sb, DELALLOC))
-		ext4_msg(sb, KERN_INFO, "delayed allocation enabled");
+	}
 
 	err = ext4_setup_system_zone(sb);
 	if (err) {
@@ -2910,6 +2923,8 @@ cantfind_ext4:
 
 failed_mount4:
 	ext4_msg(sb, KERN_ERR, "mount failed");
+	destroy_workqueue(EXT4_SB(sb)->dio_unwritten_wq);
+failed_mount_wq:
 	ext4_release_system_zone(sb);
 	if (sbi->s_journal) {
 		jbd2_journal_destroy(sbi->s_journal);
@@ -3164,9 +3179,7 @@ static int ext4_load_journal(struct super_block *sb,
 			return -EINVAL;
 	}
 
-	if (journal->j_flags & JBD2_BARRIER)
-		ext4_msg(sb, KERN_INFO, "barriers enabled");
-	else
+	if (!(journal->j_flags & JBD2_BARRIER))
 		ext4_msg(sb, KERN_INFO, "barriers disabled");
 
 	if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
@@ -3361,11 +3374,13 @@ static int ext4_sync_fs(struct super_block *sb, int wait)
 {
 	int ret = 0;
 	tid_t target;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
 
 	trace_ext4_sync_fs(sb, wait);
-	if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) {
+	flush_workqueue(sbi->dio_unwritten_wq);
+	if (jbd2_journal_start_commit(sbi->s_journal, &target)) {
 		if (wait)
-			jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target);
+			jbd2_log_wait_commit(sbi->s_journal, target);
 	}
 	return ret;
 }
@@ -3951,27 +3966,6 @@ static struct file_system_type ext4_fs_type = {
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 
-#ifdef CONFIG_EXT4DEV_COMPAT
-static int ext4dev_get_sb(struct file_system_type *fs_type, int flags,
-			  const char *dev_name, void *data,struct vfsmount *mnt)
-{
-	printk(KERN_WARNING "EXT4-fs (%s): Update your userspace programs "
-	       "to mount using ext4\n", dev_name);
-	printk(KERN_WARNING "EXT4-fs (%s): ext4dev backwards compatibility "
-	       "will go away by 2.6.31\n", dev_name);
-	return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super,mnt);
-}
-
-static struct file_system_type ext4dev_fs_type = {
-	.owner		= THIS_MODULE,
-	.name		= "ext4dev",
-	.get_sb		= ext4dev_get_sb,
-	.kill_sb	= kill_block_super,
-	.fs_flags	= FS_REQUIRES_DEV,
-};
-MODULE_ALIAS("ext4dev");
-#endif
-
 static int __init init_ext4_fs(void)
 {
 	int err;
@@ -3996,13 +3990,6 @@ static int __init init_ext4_fs(void)
 	err = register_filesystem(&ext4_fs_type);
 	if (err)
 		goto out;
-#ifdef CONFIG_EXT4DEV_COMPAT
-	err = register_filesystem(&ext4dev_fs_type);
-	if (err) {
-		unregister_filesystem(&ext4_fs_type);
-		goto out;
-	}
-#endif
 	return 0;
 out:
 	destroy_inodecache();
@@ -4021,9 +4008,6 @@ out4:
 static void __exit exit_ext4_fs(void)
 {
 	unregister_filesystem(&ext4_fs_type);
-#ifdef CONFIG_EXT4DEV_COMPAT
-	unregister_filesystem(&ext4dev_fs_type);
-#endif
 	destroy_inodecache();
 	exit_ext4_xattr();
 	exit_ext4_mballoc();
diff --git a/fs/fat/fat.h b/fs/fat/fat.h
index adb0e72a176d..7db0979c6b72 100644
--- a/fs/fat/fat.h
+++ b/fs/fat/fat.h
@@ -323,7 +323,7 @@ extern int fat_flush_inodes(struct super_block *sb, struct inode *i1,
 /* fat/misc.c */
 extern void fat_fs_error(struct super_block *s, const char *fmt, ...)
 	__attribute__ ((format (printf, 2, 3))) __cold;
-extern void fat_clusters_flush(struct super_block *sb);
+extern int fat_clusters_flush(struct super_block *sb);
 extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
 extern void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts,
 			      __le16 __time, __le16 __date, u8 time_cs);
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 04629d1302fc..76b7961ab663 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -451,12 +451,16 @@ static void fat_write_super(struct super_block *sb)
 
 static int fat_sync_fs(struct super_block *sb, int wait)
 {
-	lock_super(sb);
-	fat_clusters_flush(sb);
-	sb->s_dirt = 0;
-	unlock_super(sb);
+	int err = 0;
 
-	return 0;
+	if (sb->s_dirt) {
+		lock_super(sb);
+		sb->s_dirt = 0;
+		err = fat_clusters_flush(sb);
+		unlock_super(sb);
+	}
+
+	return err;
 }
 
 static void fat_put_super(struct super_block *sb)
@@ -812,7 +816,7 @@ static int fat_show_options(struct seq_file *m, struct vfsmount *mnt)
 			seq_puts(m, ",shortname=mixed");
 			break;
 		case VFAT_SFN_DISPLAY_LOWER | VFAT_SFN_CREATE_WIN95:
-			/* seq_puts(m, ",shortname=lower"); */
+			seq_puts(m, ",shortname=lower");
 			break;
 		default:
 			seq_puts(m, ",shortname=unknown");
@@ -963,7 +967,7 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 	opts->codepage = fat_default_codepage;
 	opts->iocharset = fat_default_iocharset;
 	if (is_vfat) {
-		opts->shortname = VFAT_SFN_DISPLAY_LOWER|VFAT_SFN_CREATE_WIN95;
+		opts->shortname = VFAT_SFN_DISPLAY_WINNT|VFAT_SFN_CREATE_WIN95;
 		opts->rodir = 0;
 	} else {
 		opts->shortname = 0;
diff --git a/fs/fat/misc.c b/fs/fat/misc.c
index 4e35be873e09..0f55f5cb732f 100644
--- a/fs/fat/misc.c
+++ b/fs/fat/misc.c
@@ -43,19 +43,19 @@ EXPORT_SYMBOL_GPL(fat_fs_error);
 
 /* Flushes the number of free clusters on FAT32 */
 /* XXX: Need to write one per FSINFO block.  Currently only writes 1 */
-void fat_clusters_flush(struct super_block *sb)
+int fat_clusters_flush(struct super_block *sb)
 {
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 	struct buffer_head *bh;
 	struct fat_boot_fsinfo *fsinfo;
 
 	if (sbi->fat_bits != 32)
-		return;
+		return 0;
 
 	bh = sb_bread(sb, sbi->fsinfo_sector);
 	if (bh == NULL) {
 		printk(KERN_ERR "FAT: bread failed in fat_clusters_flush\n");
-		return;
+		return -EIO;
 	}
 
 	fsinfo = (struct fat_boot_fsinfo *)bh->b_data;
@@ -74,6 +74,8 @@ void fat_clusters_flush(struct super_block *sb)
 		mark_buffer_dirty(bh);
 	}
 	brelse(bh);
+
+	return 0;
 }
 
 /*
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index cb6e83557112..f565f24019b5 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -499,17 +499,10 @@ xlate_to_uni(const unsigned char *name, int len, unsigned char *outname,
 	int charlen;
 
 	if (utf8) {
-		int name_len = strlen(name);
-
-		*outlen = utf8s_to_utf16s(name, PATH_MAX, (wchar_t *) outname);
-
-		/*
-		 * We stripped '.'s before and set len appropriately,
-		 * but utf8s_to_utf16s doesn't care about len
-		 */
-		*outlen -= (name_len - len);
-
-		if (*outlen > 255)
+		*outlen = utf8s_to_utf16s(name, len, (wchar_t *)outname);
+		if (*outlen < 0)
+			return *outlen;
+		else if (*outlen > 255)
 			return -ENAMETOOLONG;
 
 		op = &outname[*outlen * sizeof(wchar_t)];
diff --git a/fs/file.c b/fs/file.c
index f313314f996f..87e129030ab1 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -10,6 +10,7 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/time.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/file.h>
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 9b9d6395bad3..052f214ea6f0 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -58,6 +58,11 @@ struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id, btree_keycmp ke
 	}
 	unlock_new_inode(tree->inode);
 
+	if (!HFS_I(tree->inode)->first_blocks) {
+		printk(KERN_ERR "hfs: invalid btree extent records (0 size).\n");
+		goto free_inode;
+	}
+
 	mapping = tree->inode->i_mapping;
 	page = read_mapping_page(mapping, 0, NULL);
 	if (IS_ERR(page))
diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c
index 175d08eacc86..bed78ac8f6d1 100644
--- a/fs/hfsplus/wrapper.c
+++ b/fs/hfsplus/wrapper.c
@@ -99,6 +99,10 @@ int hfsplus_read_wrapper(struct super_block *sb)
 
 	if (hfsplus_get_last_session(sb, &part_start, &part_size))
 		return -EINVAL;
+	if ((u64)part_start + part_size > 0x100000000ULL) {
+		pr_err("hfs: volumes larger than 2TB are not supported yet\n");
+		return -EINVAL;
+	}
 	while (1) {
 		bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr);
 		if (!bh)
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 5d70b3e6d49b..ca0f5eb62b20 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -643,6 +643,7 @@ out:
 
 int __jbd2_journal_remove_checkpoint(struct journal_head *jh)
 {
+	struct transaction_chp_stats_s *stats;
 	transaction_t *transaction;
 	journal_t *journal;
 	int ret = 0;
@@ -679,6 +680,12 @@ int __jbd2_journal_remove_checkpoint(struct journal_head *jh)
 
 	/* OK, that was the last buffer for the transaction: we can now
 	   safely remove this transaction from the log */
+	stats = &transaction->t_chp_stats;
+	if (stats->cs_chp_time)
+		stats->cs_chp_time = jbd2_time_diff(stats->cs_chp_time,
+						    jiffies);
+	trace_jbd2_checkpoint_stats(journal->j_fs_dev->bd_dev,
+				    transaction->t_tid, stats);
 
 	__jbd2_journal_drop_transaction(journal, transaction);
 	kfree(transaction);
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 26d991ddc1e6..d4cfd6d2779e 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -410,10 +410,10 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	if (commit_transaction->t_synchronous_commit)
 		write_op = WRITE_SYNC_PLUG;
 	trace_jbd2_commit_locking(journal, commit_transaction);
-	stats.u.run.rs_wait = commit_transaction->t_max_wait;
-	stats.u.run.rs_locked = jiffies;
-	stats.u.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
-						stats.u.run.rs_locked);
+	stats.run.rs_wait = commit_transaction->t_max_wait;
+	stats.run.rs_locked = jiffies;
+	stats.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
+					      stats.run.rs_locked);
 
 	spin_lock(&commit_transaction->t_handle_lock);
 	while (commit_transaction->t_updates) {
@@ -486,9 +486,9 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	jbd2_journal_switch_revoke_table(journal);
 
 	trace_jbd2_commit_flushing(journal, commit_transaction);
-	stats.u.run.rs_flushing = jiffies;
-	stats.u.run.rs_locked = jbd2_time_diff(stats.u.run.rs_locked,
-					       stats.u.run.rs_flushing);
+	stats.run.rs_flushing = jiffies;
+	stats.run.rs_locked = jbd2_time_diff(stats.run.rs_locked,
+					     stats.run.rs_flushing);
 
 	commit_transaction->t_state = T_FLUSH;
 	journal->j_committing_transaction = commit_transaction;
@@ -523,11 +523,11 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	spin_unlock(&journal->j_state_lock);
 
 	trace_jbd2_commit_logging(journal, commit_transaction);
-	stats.u.run.rs_logging = jiffies;
-	stats.u.run.rs_flushing = jbd2_time_diff(stats.u.run.rs_flushing,
-						 stats.u.run.rs_logging);
-	stats.u.run.rs_blocks = commit_transaction->t_outstanding_credits;
-	stats.u.run.rs_blocks_logged = 0;
+	stats.run.rs_logging = jiffies;
+	stats.run.rs_flushing = jbd2_time_diff(stats.run.rs_flushing,
+					       stats.run.rs_logging);
+	stats.run.rs_blocks = commit_transaction->t_outstanding_credits;
+	stats.run.rs_blocks_logged = 0;
 
 	J_ASSERT(commit_transaction->t_nr_buffers <=
 		 commit_transaction->t_outstanding_credits);
@@ -695,7 +695,7 @@ start_journal_io:
 				submit_bh(write_op, bh);
 			}
 			cond_resched();
-			stats.u.run.rs_blocks_logged += bufs;
+			stats.run.rs_blocks_logged += bufs;
 
 			/* Force a new descriptor to be generated next
                            time round the loop. */
@@ -988,33 +988,30 @@ restart_loop:
 	J_ASSERT(commit_transaction->t_state == T_COMMIT);
 
 	commit_transaction->t_start = jiffies;
-	stats.u.run.rs_logging = jbd2_time_diff(stats.u.run.rs_logging,
-						commit_transaction->t_start);
+	stats.run.rs_logging = jbd2_time_diff(stats.run.rs_logging,
+					      commit_transaction->t_start);
 
 	/*
-	 * File the transaction for history
+	 * File the transaction statistics
 	 */
-	stats.ts_type = JBD2_STATS_RUN;
 	stats.ts_tid = commit_transaction->t_tid;
-	stats.u.run.rs_handle_count = commit_transaction->t_handle_count;
-	spin_lock(&journal->j_history_lock);
-	memcpy(journal->j_history + journal->j_history_cur, &stats,
-			sizeof(stats));
-	if (++journal->j_history_cur == journal->j_history_max)
-		journal->j_history_cur = 0;
+	stats.run.rs_handle_count = commit_transaction->t_handle_count;
+	trace_jbd2_run_stats(journal->j_fs_dev->bd_dev,
+			     commit_transaction->t_tid, &stats.run);
 
 	/*
 	 * Calculate overall stats
 	 */
+	spin_lock(&journal->j_history_lock);
 	journal->j_stats.ts_tid++;
-	journal->j_stats.u.run.rs_wait += stats.u.run.rs_wait;
-	journal->j_stats.u.run.rs_running += stats.u.run.rs_running;
-	journal->j_stats.u.run.rs_locked += stats.u.run.rs_locked;
-	journal->j_stats.u.run.rs_flushing += stats.u.run.rs_flushing;
-	journal->j_stats.u.run.rs_logging += stats.u.run.rs_logging;
-	journal->j_stats.u.run.rs_handle_count += stats.u.run.rs_handle_count;
-	journal->j_stats.u.run.rs_blocks += stats.u.run.rs_blocks;
-	journal->j_stats.u.run.rs_blocks_logged += stats.u.run.rs_blocks_logged;
+	journal->j_stats.run.rs_wait += stats.run.rs_wait;
+	journal->j_stats.run.rs_running += stats.run.rs_running;
+	journal->j_stats.run.rs_locked += stats.run.rs_locked;
+	journal->j_stats.run.rs_flushing += stats.run.rs_flushing;
+	journal->j_stats.run.rs_logging += stats.run.rs_logging;
+	journal->j_stats.run.rs_handle_count += stats.run.rs_handle_count;
+	journal->j_stats.run.rs_blocks += stats.run.rs_blocks;
+	journal->j_stats.run.rs_blocks_logged += stats.run.rs_blocks_logged;
 	spin_unlock(&journal->j_history_lock);
 
 	commit_transaction->t_state = T_FINISHED;
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 53b86e16e5fe..b0ab5219becb 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -136,10 +136,6 @@ static int kjournald2(void *arg)
 	journal->j_task = current;
 	wake_up(&journal->j_wait_done_commit);
 
-	printk(KERN_INFO "kjournald2 starting: pid %d, dev %s, "
-	       "commit interval %ld seconds\n", current->pid,
-	       journal->j_devname, journal->j_commit_interval / HZ);
-
 	/*
 	 * And now, wait forever for commit wakeup events.
 	 */
@@ -223,7 +219,8 @@ static int jbd2_journal_start_thread(journal_t *journal)
 {
 	struct task_struct *t;
 
-	t = kthread_run(kjournald2, journal, "kjournald2");
+	t = kthread_run(kjournald2, journal, "jbd2/%s",
+			journal->j_devname);
 	if (IS_ERR(t))
 		return PTR_ERR(t);
 
@@ -679,153 +676,6 @@ struct jbd2_stats_proc_session {
 	int max;
 };
 
-static void *jbd2_history_skip_empty(struct jbd2_stats_proc_session *s,
-					struct transaction_stats_s *ts,
-					int first)
-{
-	if (ts == s->stats + s->max)
-		ts = s->stats;
-	if (!first && ts == s->stats + s->start)
-		return NULL;
-	while (ts->ts_type == 0) {
-		ts++;
-		if (ts == s->stats + s->max)
-			ts = s->stats;
-		if (ts == s->stats + s->start)
-			return NULL;
-	}
-	return ts;
-
-}
-
-static void *jbd2_seq_history_start(struct seq_file *seq, loff_t *pos)
-{
-	struct jbd2_stats_proc_session *s = seq->private;
-	struct transaction_stats_s *ts;
-	int l = *pos;
-
-	if (l == 0)
-		return SEQ_START_TOKEN;
-	ts = jbd2_history_skip_empty(s, s->stats + s->start, 1);
-	if (!ts)
-		return NULL;
-	l--;
-	while (l) {
-		ts = jbd2_history_skip_empty(s, ++ts, 0);
-		if (!ts)
-			break;
-		l--;
-	}
-	return ts;
-}
-
-static void *jbd2_seq_history_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	struct jbd2_stats_proc_session *s = seq->private;
-	struct transaction_stats_s *ts = v;
-
-	++*pos;
-	if (v == SEQ_START_TOKEN)
-		return jbd2_history_skip_empty(s, s->stats + s->start, 1);
-	else
-		return jbd2_history_skip_empty(s, ++ts, 0);
-}
-
-static int jbd2_seq_history_show(struct seq_file *seq, void *v)
-{
-	struct transaction_stats_s *ts = v;
-	if (v == SEQ_START_TOKEN) {
-		seq_printf(seq, "%-4s %-5s %-5s %-5s %-5s %-5s %-5s %-6s %-5s "
-				"%-5s %-5s %-5s %-5s %-5s\n", "R/C", "tid",
-				"wait", "run", "lock", "flush", "log", "hndls",
-				"block", "inlog", "ctime", "write", "drop",
-				"close");
-		return 0;
-	}
-	if (ts->ts_type == JBD2_STATS_RUN)
-		seq_printf(seq, "%-4s %-5lu %-5u %-5u %-5u %-5u %-5u "
-				"%-6lu %-5lu %-5lu\n", "R", ts->ts_tid,
-				jiffies_to_msecs(ts->u.run.rs_wait),
-				jiffies_to_msecs(ts->u.run.rs_running),
-				jiffies_to_msecs(ts->u.run.rs_locked),
-				jiffies_to_msecs(ts->u.run.rs_flushing),
-				jiffies_to_msecs(ts->u.run.rs_logging),
-				ts->u.run.rs_handle_count,
-				ts->u.run.rs_blocks,
-				ts->u.run.rs_blocks_logged);
-	else if (ts->ts_type == JBD2_STATS_CHECKPOINT)
-		seq_printf(seq, "%-4s %-5lu %48s %-5u %-5lu %-5lu %-5lu\n",
-				"C", ts->ts_tid, " ",
-				jiffies_to_msecs(ts->u.chp.cs_chp_time),
-				ts->u.chp.cs_written, ts->u.chp.cs_dropped,
-				ts->u.chp.cs_forced_to_close);
-	else
-		J_ASSERT(0);
-	return 0;
-}
-
-static void jbd2_seq_history_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations jbd2_seq_history_ops = {
-	.start  = jbd2_seq_history_start,
-	.next   = jbd2_seq_history_next,
-	.stop   = jbd2_seq_history_stop,
-	.show   = jbd2_seq_history_show,
-};
-
-static int jbd2_seq_history_open(struct inode *inode, struct file *file)
-{
-	journal_t *journal = PDE(inode)->data;
-	struct jbd2_stats_proc_session *s;
-	int rc, size;
-
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
-	if (s == NULL)
-		return -ENOMEM;
-	size = sizeof(struct transaction_stats_s) * journal->j_history_max;
-	s->stats = kmalloc(size, GFP_KERNEL);
-	if (s->stats == NULL) {
-		kfree(s);
-		return -ENOMEM;
-	}
-	spin_lock(&journal->j_history_lock);
-	memcpy(s->stats, journal->j_history, size);
-	s->max = journal->j_history_max;
-	s->start = journal->j_history_cur % s->max;
-	spin_unlock(&journal->j_history_lock);
-
-	rc = seq_open(file, &jbd2_seq_history_ops);
-	if (rc == 0) {
-		struct seq_file *m = file->private_data;
-		m->private = s;
-	} else {
-		kfree(s->stats);
-		kfree(s);
-	}
-	return rc;
-
-}
-
-static int jbd2_seq_history_release(struct inode *inode, struct file *file)
-{
-	struct seq_file *seq = file->private_data;
-	struct jbd2_stats_proc_session *s = seq->private;
-
-	kfree(s->stats);
-	kfree(s);
-	return seq_release(inode, file);
-}
-
-static struct file_operations jbd2_seq_history_fops = {
-	.owner		= THIS_MODULE,
-	.open           = jbd2_seq_history_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = jbd2_seq_history_release,
-};
-
 static void *jbd2_seq_info_start(struct seq_file *seq, loff_t *pos)
 {
 	return *pos ? NULL : SEQ_START_TOKEN;
@@ -842,29 +692,29 @@ static int jbd2_seq_info_show(struct seq_file *seq, void *v)
 
 	if (v != SEQ_START_TOKEN)
 		return 0;
-	seq_printf(seq, "%lu transaction, each upto %u blocks\n",
+	seq_printf(seq, "%lu transaction, each up to %u blocks\n",
 			s->stats->ts_tid,
 			s->journal->j_max_transaction_buffers);
 	if (s->stats->ts_tid == 0)
 		return 0;
 	seq_printf(seq, "average: \n  %ums waiting for transaction\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_wait / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_wait / s->stats->ts_tid));
 	seq_printf(seq, "  %ums running transaction\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_running / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_running / s->stats->ts_tid));
 	seq_printf(seq, "  %ums transaction was being locked\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_locked / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_locked / s->stats->ts_tid));
 	seq_printf(seq, "  %ums flushing data (in ordered mode)\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_flushing / s->stats->ts_tid));
 	seq_printf(seq, "  %ums logging transaction\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_logging / s->stats->ts_tid));
 	seq_printf(seq, "  %lluus average transaction commit time\n",
 		   div_u64(s->journal->j_average_commit_time, 1000));
 	seq_printf(seq, "  %lu handles per transaction\n",
-	    s->stats->u.run.rs_handle_count / s->stats->ts_tid);
+	    s->stats->run.rs_handle_count / s->stats->ts_tid);
 	seq_printf(seq, "  %lu blocks per transaction\n",
-	    s->stats->u.run.rs_blocks / s->stats->ts_tid);
+	    s->stats->run.rs_blocks / s->stats->ts_tid);
 	seq_printf(seq, "  %lu logged blocks per transaction\n",
-	    s->stats->u.run.rs_blocks_logged / s->stats->ts_tid);
+	    s->stats->run.rs_blocks_logged / s->stats->ts_tid);
 	return 0;
 }
 
@@ -920,7 +770,7 @@ static int jbd2_seq_info_release(struct inode *inode, struct file *file)
 	return seq_release(inode, file);
 }
 
-static struct file_operations jbd2_seq_info_fops = {
+static const struct file_operations jbd2_seq_info_fops = {
 	.owner		= THIS_MODULE,
 	.open           = jbd2_seq_info_open,
 	.read           = seq_read,
@@ -934,8 +784,6 @@ static void jbd2_stats_proc_init(journal_t *journal)
 {
 	journal->j_proc_entry = proc_mkdir(journal->j_devname, proc_jbd2_stats);
 	if (journal->j_proc_entry) {
-		proc_create_data("history", S_IRUGO, journal->j_proc_entry,
-				 &jbd2_seq_history_fops, journal);
 		proc_create_data("info", S_IRUGO, journal->j_proc_entry,
 				 &jbd2_seq_info_fops, journal);
 	}
@@ -944,27 +792,9 @@ static void jbd2_stats_proc_init(journal_t *journal)
 static void jbd2_stats_proc_exit(journal_t *journal)
 {
 	remove_proc_entry("info", journal->j_proc_entry);
-	remove_proc_entry("history", journal->j_proc_entry);
 	remove_proc_entry(journal->j_devname, proc_jbd2_stats);
 }
 
-static void journal_init_stats(journal_t *journal)
-{
-	int size;
-
-	if (!proc_jbd2_stats)
-		return;
-
-	journal->j_history_max = 100;
-	size = sizeof(struct transaction_stats_s) * journal->j_history_max;
-	journal->j_history = kzalloc(size, GFP_KERNEL);
-	if (!journal->j_history) {
-		journal->j_history_max = 0;
-		return;
-	}
-	spin_lock_init(&journal->j_history_lock);
-}
-
 /*
  * Management for journal control blocks: functions to create and
  * destroy journal_t structures, and to initialise and read existing
@@ -1009,7 +839,7 @@ static journal_t * journal_init_common (void)
 		goto fail;
 	}
 
-	journal_init_stats(journal);
+	spin_lock_init(&journal->j_history_lock);
 
 	return journal;
 fail:
@@ -1115,7 +945,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode)
 	while ((p = strchr(p, '/')))
 		*p = '!';
 	p = journal->j_devname + strlen(journal->j_devname);
-	sprintf(p, ":%lu", journal->j_inode->i_ino);
+	sprintf(p, "-%lu", journal->j_inode->i_ino);
 	jbd_debug(1,
 		  "journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n",
 		  journal, inode->i_sb->s_id, inode->i_ino,
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 63976c0ccc25..99ea196f071f 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -1180,7 +1180,7 @@ static int nfs4_init_client(struct nfs_client *clp,
 				      1, flags & NFS_MOUNT_NORESVPORT);
 	if (error < 0)
 		goto error;
-	memcpy(clp->cl_ipaddr, ip_addr, sizeof(clp->cl_ipaddr));
+	strlcpy(clp->cl_ipaddr, ip_addr, sizeof(clp->cl_ipaddr));
 
 	error = nfs_idmap_new(clp);
 	if (error < 0) {
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 32062c33c859..7cb298525eef 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1536,6 +1536,8 @@ nfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
 		old_dentry->d_parent->d_name.name, old_dentry->d_name.name,
 		dentry->d_parent->d_name.name, dentry->d_name.name);
 
+	nfs_inode_return_delegation(inode);
+
 	d_drop(dentry);
 	error = NFS_PROTO(dir)->link(inode, dir, &dentry->d_name);
 	if (error == 0) {
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 6c3210099d51..e1d415e97849 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -457,6 +457,7 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq)
 	};
 	struct rpc_task_setup task_setup_data = {
 		.rpc_client = NFS_CLIENT(inode),
+		.rpc_message = &msg,
 		.callback_ops = &nfs_write_direct_ops,
 		.workqueue = nfsiod_workqueue,
 		.flags = RPC_TASK_ASYNC,
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 2636c26d56fa..fa3408f20112 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -121,7 +121,7 @@ static struct vfsmount *try_location(struct nfs_clone_mount *mountdata,
 
 	mnt_path = nfs4_pathname_string(&location->rootpath, page2, PAGE_SIZE);
 	if (IS_ERR(mnt_path))
-		return mnt;
+		return ERR_CAST(mnt_path);
 	mountdata->mnt_path = mnt_path;
 	maxbuflen = mnt_path - 1 - page2;
 
@@ -132,15 +132,15 @@ static struct vfsmount *try_location(struct nfs_clone_mount *mountdata,
 		if (buf->len <= 0 || buf->len >= maxbuflen)
 			continue;
 
-		mountdata->addr = (struct sockaddr *)&addr;
-
 		if (memchr(buf->data, IPV6_SCOPE_DELIMITER, buf->len))
 			continue;
-		mountdata->addrlen = nfs_parse_server_name(buf->data,
-				buf->len,
-				mountdata->addr, mountdata->addrlen);
+
+		mountdata->addrlen = nfs_parse_server_name(buf->data, buf->len,
+				(struct sockaddr *)&addr, sizeof(addr));
 		if (mountdata->addrlen == 0)
 			continue;
+
+		mountdata->addr = (struct sockaddr *)&addr;
 		rpc_set_port(mountdata->addr, NFS_PORT);
 
 		memcpy(page2, buf->data, buf->len);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index ed7c269e2514..ff37454fa783 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -72,12 +72,17 @@ static int _nfs4_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle,
 /* Prevent leaks of NFSv4 errors into userland */
 static int nfs4_map_errors(int err)
 {
-	if (err < -1000) {
+	if (err >= -1000)
+		return err;
+	switch (err) {
+	case -NFS4ERR_RESOURCE:
+		return -EREMOTEIO;
+	default:
 		dprintk("%s could not handle NFSv4 error %d\n",
 				__func__, -err);
-		return -EIO;
+		break;
 	}
-	return err;
+	return -EIO;
 }
 
 /*
@@ -3060,9 +3065,6 @@ static void nfs4_renew_done(struct rpc_task *task, void *data)
 	if (time_before(clp->cl_last_renewal,timestamp))
 		clp->cl_last_renewal = timestamp;
 	spin_unlock(&clp->cl_lock);
-	dprintk("%s calling put_rpccred on rpc_cred %p\n", __func__,
-				task->tk_msg.rpc_cred);
-	put_rpccred(task->tk_msg.rpc_cred);
 }
 
 static const struct rpc_call_ops nfs4_renew_ops = {
@@ -4877,7 +4879,6 @@ void nfs41_sequence_call_done(struct rpc_task *task, void *data)
 	nfs41_sequence_free_slot(clp, task->tk_msg.rpc_resp);
 	dprintk("%s rpc_cred %p\n", __func__, task->tk_msg.rpc_cred);
 
-	put_rpccred(task->tk_msg.rpc_cred);
 	kfree(task->tk_msg.rpc_argp);
 	kfree(task->tk_msg.rpc_resp);
 
diff --git a/fs/nfs/nfs4renewd.c b/fs/nfs/nfs4renewd.c
index e27c6cef18f2..0156c01c212c 100644
--- a/fs/nfs/nfs4renewd.c
+++ b/fs/nfs/nfs4renewd.c
@@ -127,12 +127,6 @@ nfs4_schedule_state_renewal(struct nfs_client *clp)
 }
 
 void
-nfs4_renewd_prepare_shutdown(struct nfs_server *server)
-{
-	cancel_delayed_work(&server->nfs_client->cl_renewd);
-}
-
-void
 nfs4_kill_renewd(struct nfs_client *clp)
 {
 	cancel_delayed_work_sync(&clp->cl_renewd);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 83ad47cbdd8a..20b4e30e6c82 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -5681,7 +5681,6 @@ static struct {
 	{ NFS4ERR_SERVERFAULT,	-ESERVERFAULT	},
 	{ NFS4ERR_BADTYPE,	-EBADTYPE	},
 	{ NFS4ERR_LOCKED,	-EAGAIN		},
-	{ NFS4ERR_RESOURCE,	-EREMOTEIO	},
 	{ NFS4ERR_SYMLINK,	-ELOOP		},
 	{ NFS4ERR_OP_ILLEGAL,	-EOPNOTSUPP	},
 	{ NFS4ERR_DEADLOCK,	-EDEADLK	},
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 29786d3b9326..90be551b80c1 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -728,22 +728,24 @@ static void nfs_umount_begin(struct super_block *sb)
 	unlock_kernel();
 }
 
-static struct nfs_parsed_mount_data *nfs_alloc_parsed_mount_data(int flags)
+static struct nfs_parsed_mount_data *nfs_alloc_parsed_mount_data(unsigned int version)
 {
 	struct nfs_parsed_mount_data *data;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (data) {
-		data->flags		= flags;
 		data->rsize		= NFS_MAX_FILE_IO_SIZE;
 		data->wsize		= NFS_MAX_FILE_IO_SIZE;
 		data->acregmin		= NFS_DEF_ACREGMIN;
 		data->acregmax		= NFS_DEF_ACREGMAX;
 		data->acdirmin		= NFS_DEF_ACDIRMIN;
 		data->acdirmax		= NFS_DEF_ACDIRMAX;
+		data->mount_server.port	= NFS_UNSPEC_PORT;
 		data->nfs_server.port	= NFS_UNSPEC_PORT;
+		data->nfs_server.protocol = XPRT_TRANSPORT_TCP;
 		data->auth_flavors[0]	= RPC_AUTH_UNIX;
 		data->auth_flavor_len	= 1;
+		data->version		= version;
 		data->minorversion	= 0;
 	}
 	return data;
@@ -776,15 +778,13 @@ static int nfs_verify_server_address(struct sockaddr *addr)
  * Select between a default port value and a user-specified port value.
  * If a zero value is set, then autobind will be used.
  */
-static void nfs_set_default_port(struct sockaddr *sap, const int parsed_port,
+static void nfs_set_port(struct sockaddr *sap, int *port,
 				 const unsigned short default_port)
 {
-	unsigned short port = default_port;
+	if (*port == NFS_UNSPEC_PORT)
+		*port = default_port;
 
-	if (parsed_port != NFS_UNSPEC_PORT)
-		port = parsed_port;
-
-	rpc_set_port(sap, port);
+	rpc_set_port(sap, *port);
 }
 
 /*
@@ -1253,6 +1253,7 @@ static int nfs_parse_mount_options(char *raw,
 			default:
 				dfprintk(MOUNT, "NFS:   unrecognized "
 						"transport protocol\n");
+				kfree(string);
 				return 0;
 			}
 			break;
@@ -1475,7 +1476,7 @@ static int nfs_try_mount(struct nfs_parsed_mount_data *args,
 		args->mount_server.addrlen = args->nfs_server.addrlen;
 	}
 	request.salen = args->mount_server.addrlen;
-	nfs_set_default_port(request.sap, args->mount_server.port, 0);
+	nfs_set_port(request.sap, &args->mount_server.port, 0);
 
 	/*
 	 * Now ask the mount server to map our export path
@@ -1711,8 +1712,6 @@ static int nfs_validate_mount_data(void *options,
 
 		if (!(data->flags & NFS_MOUNT_TCP))
 			args->nfs_server.protocol = XPRT_TRANSPORT_UDP;
-		else
-			args->nfs_server.protocol = XPRT_TRANSPORT_TCP;
 		/* N.B. caller will free nfs_server.hostname in all cases */
 		args->nfs_server.hostname = kstrdup(data->hostname, GFP_KERNEL);
 		args->namlen		= data->namlen;
@@ -1767,7 +1766,7 @@ static int nfs_validate_mount_data(void *options,
 			goto out_v4_not_compiled;
 #endif
 
-		nfs_set_default_port(sap, args->nfs_server.port, 0);
+		nfs_set_port(sap, &args->nfs_server.port, 0);
 
 		nfs_set_mount_transport_protocol(args);
 
@@ -1848,9 +1847,10 @@ nfs_compare_remount_data(struct nfs_server *nfss,
 	    data->acdirmin != nfss->acdirmin / HZ ||
 	    data->acdirmax != nfss->acdirmax / HZ ||
 	    data->timeo != (10U * nfss->client->cl_timeout->to_initval / HZ) ||
+	    data->nfs_server.port != nfss->port ||
 	    data->nfs_server.addrlen != nfss->nfs_client->cl_addrlen ||
-	    memcmp(&data->nfs_server.address, &nfss->nfs_client->cl_addr,
-		   data->nfs_server.addrlen) != 0)
+	    !rpc_cmp_addr((struct sockaddr *)&data->nfs_server.address,
+			  (struct sockaddr *)&nfss->nfs_client->cl_addr))
 		return -EINVAL;
 
 	return 0;
@@ -1893,6 +1893,7 @@ nfs_remount(struct super_block *sb, int *flags, char *raw_data)
 	data->acdirmin = nfss->acdirmin / HZ;
 	data->acdirmax = nfss->acdirmax / HZ;
 	data->timeo = 10U * nfss->client->cl_timeout->to_initval / HZ;
+	data->nfs_server.port = nfss->port;
 	data->nfs_server.addrlen = nfss->nfs_client->cl_addrlen;
 	memcpy(&data->nfs_server.address, &nfss->nfs_client->cl_addr,
 		data->nfs_server.addrlen);
@@ -2106,7 +2107,7 @@ static int nfs_get_sb(struct file_system_type *fs_type,
 	};
 	int error = -ENOMEM;
 
-	data = nfs_alloc_parsed_mount_data(NFS_MOUNT_VER3 | NFS_MOUNT_TCP);
+	data = nfs_alloc_parsed_mount_data(3);
 	mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
 	if (data == NULL || mntfh == NULL)
 		goto out_free_fh;
@@ -2331,7 +2332,7 @@ static int nfs4_validate_text_mount_data(void *options,
 {
 	struct sockaddr *sap = (struct sockaddr *)&args->nfs_server.address;
 
-	nfs_set_default_port(sap, args->nfs_server.port, NFS_PORT);
+	nfs_set_port(sap, &args->nfs_server.port, NFS_PORT);
 
 	nfs_validate_transport_protocol(args);
 
@@ -2376,7 +2377,6 @@ static int nfs4_validate_mount_data(void *options,
 	if (data == NULL)
 		goto out_no_data;
 
-	args->version		= 4;
 	switch (data->version) {
 	case 1:
 		if (data->host_addrlen > sizeof(args->nfs_server.address))
@@ -2660,7 +2660,7 @@ static int nfs4_get_sb(struct file_system_type *fs_type,
 	struct nfs_parsed_mount_data *data;
 	int error = -ENOMEM;
 
-	data = nfs_alloc_parsed_mount_data(0);
+	data = nfs_alloc_parsed_mount_data(4);
 	if (data == NULL)
 		goto out_free_data;
 
@@ -2690,7 +2690,6 @@ static void nfs4_kill_super(struct super_block *sb)
 	dprintk("--> %s\n", __func__);
 	nfs_super_return_all_delegations(sb);
 	kill_anon_super(sb);
-	nfs4_renewd_prepare_shutdown(server);
 	nfs_fscache_release_super_cookie(sb);
 	nfs_free_server(server);
 	dprintk("<-- %s\n", __func__);
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 00388d2a3c99..5c01fc148ce8 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -176,7 +176,7 @@ static const struct file_operations exports_operations = {
 extern int nfsd_pool_stats_open(struct inode *inode, struct file *file);
 extern int nfsd_pool_stats_release(struct inode *inode, struct file *file);
 
-static struct file_operations pool_stats_operations = {
+static const struct file_operations pool_stats_operations = {
 	.open		= nfsd_pool_stats_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 6a2711f4c321..5941958f1e47 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -36,6 +36,7 @@
 
 void nilfs_btnode_cache_init_once(struct address_space *btnc)
 {
+	memset(btnc, 0, sizeof(*btnc));
 	INIT_RADIX_TREE(&btnc->page_tree, GFP_ATOMIC);
 	spin_lock_init(&btnc->tree_lock);
 	INIT_LIST_HEAD(&btnc->private_list);
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 1a4fa04cf071..e097099bfc8f 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -697,7 +697,7 @@ not_empty:
 	return 0;
 }
 
-struct file_operations nilfs_dir_operations = {
+const struct file_operations nilfs_dir_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= generic_read_dir,
 	.readdir	= nilfs_readdir,
diff --git a/fs/nilfs2/file.c b/fs/nilfs2/file.c
index 7d7b4983dee3..30292df443ce 100644
--- a/fs/nilfs2/file.c
+++ b/fs/nilfs2/file.c
@@ -134,7 +134,7 @@ static int nilfs_file_mmap(struct file *file, struct vm_area_struct *vma)
  * We have mostly NULL's here: the current defaults are ok for
  * the nilfs filesystem.
  */
-struct file_operations nilfs_file_operations = {
+const struct file_operations nilfs_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
 	.write		= do_sync_write,
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 2d2c501deb54..5040220c3732 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -400,6 +400,7 @@ int nilfs_read_inode_common(struct inode *inode,
 	ii->i_dir_acl = S_ISREG(inode->i_mode) ?
 		0 : le32_to_cpu(raw_inode->i_dir_acl);
 #endif
+	ii->i_dir_start_lookup = 0;
 	ii->i_cno = 0;
 	inode->i_generation = le32_to_cpu(raw_inode->i_generation);
 
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index b18c4998f8d0..f6326112d647 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -433,7 +433,7 @@ static const struct address_space_operations def_mdt_aops = {
 };
 
 static const struct inode_operations def_mdt_iops;
-static struct file_operations def_mdt_fops;
+static const struct file_operations def_mdt_fops;
 
 /*
  * NILFS2 uses pseudo inodes for meta data files such as DAT, cpfile, sufile,
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index bad7368782d0..4da6f67e9a91 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -294,9 +294,9 @@ void nilfs_clear_gcdat_inode(struct the_nilfs *);
 /*
  * Inodes and files operations
  */
-extern struct file_operations nilfs_dir_operations;
+extern const struct file_operations nilfs_dir_operations;
 extern const struct inode_operations nilfs_file_inode_operations;
-extern struct file_operations nilfs_file_operations;
+extern const struct file_operations nilfs_file_operations;
 extern const struct address_space_operations nilfs_aops;
 extern const struct inode_operations nilfs_dir_inode_operations;
 extern const struct inode_operations nilfs_special_inode_operations;
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c
index 2224b4d07bf0..44a88a9fa2c8 100644
--- a/fs/nls/nls_base.c
+++ b/fs/nls/nls_base.c
@@ -124,10 +124,10 @@ int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs)
 	while (*s && len > 0) {
 		if (*s & 0x80) {
 			size = utf8_to_utf32(s, len, &u);
-			if (size < 0) {
-				/* Ignore character and move on */
-				size = 1;
-			} else if (u >= PLANE_SIZE) {
+			if (size < 0)
+				return -EINVAL;
+
+			if (u >= PLANE_SIZE) {
 				u -= PLANE_SIZE;
 				*op++ = (wchar_t) (SURROGATE_PAIR |
 						((u >> 10) & SURROGATE_BITS));
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 828a889be909..7e54e52964dd 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -91,6 +91,7 @@ static int dnotify_handle_event(struct fsnotify_group *group,
 	struct dnotify_struct *dn;
 	struct dnotify_struct **prev;
 	struct fown_struct *fown;
+	__u32 test_mask = event->mask & ~FS_EVENT_ON_CHILD;
 
 	to_tell = event->to_tell;
 
@@ -106,7 +107,7 @@ static int dnotify_handle_event(struct fsnotify_group *group,
 	spin_lock(&entry->lock);
 	prev = &dnentry->dn;
 	while ((dn = *prev) != NULL) {
-		if ((dn->dn_mask & event->mask) == 0) {
+		if ((dn->dn_mask & test_mask) == 0) {
 			prev = &dn->dn_next;
 			continue;
 		}
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index c8a07c65482b..3165d85aada2 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -324,11 +324,11 @@ int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
 	spin_lock(&group->mark_lock);
 	spin_lock(&inode->i_lock);
 
-	entry->group = group;
-	entry->inode = inode;
-
 	lentry = fsnotify_find_mark_entry(group, inode);
 	if (!lentry) {
+		entry->group = group;
+		entry->inode = inode;
+
 		hlist_add_head(&entry->i_list, &inode->i_fsnotify_mark_entries);
 		list_add(&entry->g_list, &group->mark_entries);
 
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 3816d5750dd5..b8bf53b4c108 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -143,7 +143,7 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new
 			/* remember, after old was put on the wait_q we aren't
 			 * allowed to look at the inode any more, only thing
 			 * left to check was if the file_name is the same */
-			if (old->name_len &&
+			if (!old->name_len ||
 			    !strcmp(old->file_name, new->file_name))
 				return true;
 			break;
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 09cc25d04611..c452d116b892 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -966,7 +966,7 @@ static ssize_t o2hb_debug_read(struct file *file, char __user *buf,
 }
 #endif  /* CONFIG_DEBUG_FS */
 
-static struct file_operations o2hb_debug_fops = {
+static const struct file_operations o2hb_debug_fops = {
 	.open =		o2hb_debug_open,
 	.release =	o2hb_debug_release,
 	.read =		o2hb_debug_read,
diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c
index cfb2be708abe..da794bc07a6c 100644
--- a/fs/ocfs2/cluster/netdebug.c
+++ b/fs/ocfs2/cluster/netdebug.c
@@ -207,7 +207,7 @@ static int nst_fop_release(struct inode *inode, struct file *file)
 	return seq_release_private(inode, file);
 }
 
-static struct file_operations nst_seq_fops = {
+static const struct file_operations nst_seq_fops = {
 	.open = nst_fop_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -388,7 +388,7 @@ static int sc_fop_release(struct inode *inode, struct file *file)
 	return seq_release_private(inode, file);
 }
 
-static struct file_operations sc_seq_fops = {
+static const struct file_operations sc_seq_fops = {
 	.open = sc_fop_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index ca46002ec10e..42b0bad7a612 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -478,7 +478,7 @@ bail:
 	return -ENOMEM;
 }
 
-static struct file_operations debug_purgelist_fops = {
+static const struct file_operations debug_purgelist_fops = {
 	.open =		debug_purgelist_open,
 	.release =	debug_buffer_release,
 	.read =		debug_buffer_read,
@@ -538,7 +538,7 @@ bail:
 	return -ENOMEM;
 }
 
-static struct file_operations debug_mle_fops = {
+static const struct file_operations debug_mle_fops = {
 	.open =		debug_mle_open,
 	.release =	debug_buffer_release,
 	.read =		debug_buffer_read,
@@ -741,7 +741,7 @@ static int debug_lockres_release(struct inode *inode, struct file *file)
 	return seq_release_private(inode, file);
 }
 
-static struct file_operations debug_lockres_fops = {
+static const struct file_operations debug_lockres_fops = {
 	.open =		debug_lockres_open,
 	.release =	debug_lockres_release,
 	.read =		seq_read,
@@ -925,7 +925,7 @@ bail:
 	return -ENOMEM;
 }
 
-static struct file_operations debug_state_fops = {
+static const struct file_operations debug_state_fops = {
 	.open =		debug_state_open,
 	.release =	debug_buffer_release,
 	.read =		debug_buffer_read,
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 4cc3c890a2cd..c0e48aeebb1c 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -373,7 +373,7 @@ static ssize_t ocfs2_debug_read(struct file *file, char __user *buf,
 }
 #endif	/* CONFIG_DEBUG_FS */
 
-static struct file_operations ocfs2_osb_debug_fops = {
+static const struct file_operations ocfs2_osb_debug_fops = {
 	.open =		ocfs2_osb_debug_open,
 	.release =	ocfs2_debug_release,
 	.read =		ocfs2_debug_read,
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
index 3680bae335b5..b42d62419034 100644
--- a/fs/omfs/dir.c
+++ b/fs/omfs/dir.c
@@ -498,7 +498,7 @@ const struct inode_operations omfs_dir_inops = {
 	.rmdir = omfs_rmdir,
 };
 
-struct file_operations omfs_dir_operations = {
+const struct file_operations omfs_dir_operations = {
 	.read = generic_read_dir,
 	.readdir = omfs_readdir,
 	.llseek = generic_file_llseek,
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 4845fbb18e6e..399487c09364 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -322,7 +322,7 @@ static sector_t omfs_bmap(struct address_space *mapping, sector_t block)
 	return generic_block_bmap(mapping, block, omfs_get_block);
 }
 
-struct file_operations omfs_file_operations = {
+const struct file_operations omfs_file_operations = {
 	.llseek = generic_file_llseek,
 	.read = do_sync_read,
 	.write = do_sync_write,
diff --git a/fs/omfs/omfs.h b/fs/omfs/omfs.h
index df71039945ac..ebe2fdbe535e 100644
--- a/fs/omfs/omfs.h
+++ b/fs/omfs/omfs.h
@@ -44,14 +44,14 @@ extern int omfs_allocate_range(struct super_block *sb, int min_request,
 extern int omfs_clear_range(struct super_block *sb, u64 block, int count);
 
 /* dir.c */
-extern struct file_operations omfs_dir_operations;
+extern const struct file_operations omfs_dir_operations;
 extern const struct inode_operations omfs_dir_inops;
 extern int omfs_make_empty(struct inode *inode, struct super_block *sb);
 extern int omfs_is_bad(struct omfs_sb_info *sbi, struct omfs_header *header,
 			u64 fsblock);
 
 /* file.c */
-extern struct file_operations omfs_file_operations;
+extern const struct file_operations omfs_file_operations;
 extern const struct inode_operations omfs_file_inops;
 extern const struct address_space_operations omfs_aops;
 extern void omfs_make_empty_table(struct buffer_head *bh, int offset);
diff --git a/fs/pipe.c b/fs/pipe.c
index 52c415114838..ae17d026aaa3 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -777,36 +777,55 @@ pipe_rdwr_release(struct inode *inode, struct file *filp)
 static int
 pipe_read_open(struct inode *inode, struct file *filp)
 {
-	/* We could have perhaps used atomic_t, but this and friends
-	   below are the only places.  So it doesn't seem worthwhile.  */
+	int ret = -ENOENT;
+
 	mutex_lock(&inode->i_mutex);
-	inode->i_pipe->readers++;
+
+	if (inode->i_pipe) {
+		ret = 0;
+		inode->i_pipe->readers++;
+	}
+
 	mutex_unlock(&inode->i_mutex);
 
-	return 0;
+	return ret;
 }
 
 static int
 pipe_write_open(struct inode *inode, struct file *filp)
 {
+	int ret = -ENOENT;
+
 	mutex_lock(&inode->i_mutex);
-	inode->i_pipe->writers++;
+
+	if (inode->i_pipe) {
+		ret = 0;
+		inode->i_pipe->writers++;
+	}
+
 	mutex_unlock(&inode->i_mutex);
 
-	return 0;
+	return ret;
 }
 
 static int
 pipe_rdwr_open(struct inode *inode, struct file *filp)
 {
+	int ret = -ENOENT;
+
 	mutex_lock(&inode->i_mutex);
-	if (filp->f_mode & FMODE_READ)
-		inode->i_pipe->readers++;
-	if (filp->f_mode & FMODE_WRITE)
-		inode->i_pipe->writers++;
+
+	if (inode->i_pipe) {
+		ret = 0;
+		if (filp->f_mode & FMODE_READ)
+			inode->i_pipe->readers++;
+		if (filp->f_mode & FMODE_WRITE)
+			inode->i_pipe->writers++;
+	}
+
 	mutex_unlock(&inode->i_mutex);
 
-	return 0;
+	return ret;
 }
 
 /*
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index 56013371f9f3..a44a7897fd4d 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -23,7 +23,6 @@
 #include <asm/io.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
-#include <linux/mm.h>
 #include <linux/memory.h>
 #include <asm/sections.h>
 
diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index c7bff4f603ff..a65239cfd97e 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -99,7 +99,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
 		"VmallocUsed:    %8lu kB\n"
 		"VmallocChunk:   %8lu kB\n"
 #ifdef CONFIG_MEMORY_FAILURE
-		"HardwareCorrupted: %8lu kB\n"
+		"HardwareCorrupted: %5lu kB\n"
 #endif
 		,
 		K(i.totalram),
diff --git a/fs/proc/page.c b/fs/proc/page.c
index 2281c2cbfe2b..5033ce0d254b 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -94,6 +94,7 @@ static const struct file_operations proc_kpagecount_operations = {
 #define KPF_COMPOUND_TAIL	16
 #define KPF_HUGE		17
 #define KPF_UNEVICTABLE		18
+#define KPF_HWPOISON		19
 #define KPF_NOPAGE		20
 
 #define KPF_KSM			21
@@ -180,6 +181,10 @@ static u64 get_uflags(struct page *page)
 	u |= kpf_copy_bit(k, KPF_UNEVICTABLE,	PG_unevictable);
 	u |= kpf_copy_bit(k, KPF_MLOCKED,	PG_mlocked);
 
+#ifdef CONFIG_MEMORY_FAILURE
+	u |= kpf_copy_bit(k, KPF_HWPOISON,	PG_hwpoison);
+#endif
+
 #ifdef CONFIG_IA64_UNCACHED_ALLOCATOR
 	u |= kpf_copy_bit(k, KPF_UNCACHED,	PG_uncached);
 #endif
diff --git a/fs/romfs/storage.c b/fs/romfs/storage.c
index b3208adf8e71..71e2b4d50a0a 100644
--- a/fs/romfs/storage.c
+++ b/fs/romfs/storage.c
@@ -253,11 +253,11 @@ ssize_t romfs_dev_strnlen(struct super_block *sb,
 
 #ifdef CONFIG_ROMFS_ON_MTD
 	if (sb->s_mtd)
-		return romfs_mtd_strnlen(sb, pos, limit);
+		return romfs_mtd_strnlen(sb, pos, maxlen);
 #endif
 #ifdef CONFIG_ROMFS_ON_BLOCK
 	if (sb->s_bdev)
-		return romfs_blk_strnlen(sb, pos, limit);
+		return romfs_blk_strnlen(sb, pos, maxlen);
 #endif
 	return -EIO;
 }
diff --git a/fs/select.c b/fs/select.c
index a201fc370223..fd38ce2e32e3 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/syscalls.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 0050fc40e8c9..5fad489ce5bc 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -894,7 +894,8 @@ int sysfs_move_dir(struct kobject *kobj, struct kobject *new_parent_kobj)
 
 	mutex_lock(&sysfs_rename_mutex);
 	BUG_ON(!sd->s_parent);
-	new_parent_sd = new_parent_kobj->sd ? new_parent_kobj->sd : &sysfs_root;
+	new_parent_sd = (new_parent_kobj && new_parent_kobj->sd) ?
+		new_parent_kobj->sd : &sysfs_root;
 
 	error = 0;
 	if (sd->s_parent == new_parent_sd)
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 561a9c050cef..f5ea4680f15f 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -268,7 +268,7 @@ static int sysfs_get_open_dirent(struct sysfs_dirent *sd,
 	struct sysfs_open_dirent *od, *new_od = NULL;
 
  retry:
-	spin_lock(&sysfs_open_dirent_lock);
+	spin_lock_irq(&sysfs_open_dirent_lock);
 
 	if (!sd->s_attr.open && new_od) {
 		sd->s_attr.open = new_od;
@@ -281,7 +281,7 @@ static int sysfs_get_open_dirent(struct sysfs_dirent *sd,
 		list_add_tail(&buffer->list, &od->buffers);
 	}
 
-	spin_unlock(&sysfs_open_dirent_lock);
+	spin_unlock_irq(&sysfs_open_dirent_lock);
 
 	if (od) {
 		kfree(new_od);
@@ -315,8 +315,9 @@ static void sysfs_put_open_dirent(struct sysfs_dirent *sd,
 				  struct sysfs_buffer *buffer)
 {
 	struct sysfs_open_dirent *od = sd->s_attr.open;
+	unsigned long flags;
 
-	spin_lock(&sysfs_open_dirent_lock);
+	spin_lock_irqsave(&sysfs_open_dirent_lock, flags);
 
 	list_del(&buffer->list);
 	if (atomic_dec_and_test(&od->refcnt))
@@ -324,7 +325,7 @@ static void sysfs_put_open_dirent(struct sysfs_dirent *sd,
 	else
 		od = NULL;
 
-	spin_unlock(&sysfs_open_dirent_lock);
+	spin_unlock_irqrestore(&sysfs_open_dirent_lock, flags);
 
 	kfree(od);
 }
@@ -456,8 +457,9 @@ static unsigned int sysfs_poll(struct file *filp, poll_table *wait)
 void sysfs_notify_dirent(struct sysfs_dirent *sd)
 {
 	struct sysfs_open_dirent *od;
+	unsigned long flags;
 
-	spin_lock(&sysfs_open_dirent_lock);
+	spin_lock_irqsave(&sysfs_open_dirent_lock, flags);
 
 	od = sd->s_attr.open;
 	if (od) {
@@ -465,7 +467,7 @@ void sysfs_notify_dirent(struct sysfs_dirent *sd)
 		wake_up_interruptible(&od->poll);
 	}
 
-	spin_unlock(&sysfs_open_dirent_lock);
+	spin_unlock_irqrestore(&sysfs_open_dirent_lock, flags);
 }
 EXPORT_SYMBOL_GPL(sysfs_notify_dirent);
 
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 381854461b28..c2e30eea74dc 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -186,19 +186,37 @@ xfs_destroy_ioend(
 }
 
 /*
+ * If the end of the current ioend is beyond the current EOF,
+ * return the new EOF value, otherwise zero.
+ */
+STATIC xfs_fsize_t
+xfs_ioend_new_eof(
+	xfs_ioend_t		*ioend)
+{
+	xfs_inode_t		*ip = XFS_I(ioend->io_inode);
+	xfs_fsize_t		isize;
+	xfs_fsize_t		bsize;
+
+	bsize = ioend->io_offset + ioend->io_size;
+	isize = MAX(ip->i_size, ip->i_new_size);
+	isize = MIN(isize, bsize);
+	return isize > ip->i_d.di_size ? isize : 0;
+}
+
+/*
  * Update on-disk file size now that data has been written to disk.
  * The current in-memory file size is i_size.  If a write is beyond
  * eof i_new_size will be the intended file size until i_size is
  * updated.  If this write does not extend all the way to the valid
  * file size then restrict this update to the end of the write.
  */
+
 STATIC void
 xfs_setfilesize(
 	xfs_ioend_t		*ioend)
 {
 	xfs_inode_t		*ip = XFS_I(ioend->io_inode);
 	xfs_fsize_t		isize;
-	xfs_fsize_t		bsize;
 
 	ASSERT((ip->i_d.di_mode & S_IFMT) == S_IFREG);
 	ASSERT(ioend->io_type != IOMAP_READ);
@@ -206,16 +224,10 @@ xfs_setfilesize(
 	if (unlikely(ioend->io_error))
 		return;
 
-	bsize = ioend->io_offset + ioend->io_size;
-
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
-
-	isize = MAX(ip->i_size, ip->i_new_size);
-	isize = MIN(isize, bsize);
-
-	if (ip->i_d.di_size < isize) {
+	isize = xfs_ioend_new_eof(ioend);
+	if (isize) {
 		ip->i_d.di_size = isize;
-		ip->i_update_core = 1;
 		xfs_mark_inode_dirty_sync(ip);
 	}
 
@@ -404,10 +416,16 @@ xfs_submit_ioend_bio(
 	struct bio	*bio)
 {
 	atomic_inc(&ioend->io_remaining);
-
 	bio->bi_private = ioend;
 	bio->bi_end_io = xfs_end_bio;
 
+	/*
+	 * If the I/O is beyond EOF we mark the inode dirty immediately
+	 * but don't update the inode size until I/O completion.
+	 */
+	if (xfs_ioend_new_eof(ioend))
+		xfs_mark_inode_dirty_sync(XFS_I(ioend->io_inode));
+
 	submit_bio(WRITE, bio);
 	ASSERT(!bio_flagged(bio, BIO_EOPNOTSUPP));
 	bio_put(bio);
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 629370974e57..eff61e2732af 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -176,14 +176,7 @@ xfs_file_fsync(
 	struct dentry		*dentry,
 	int			datasync)
 {
-	struct inode		*inode = dentry->d_inode;
-	struct xfs_inode	*ip = XFS_I(inode);
-	int			error;
-
-	/* capture size updates in I/O completion before writing the inode. */
-	error = filemap_fdatawait(inode->i_mapping);
-	if (error)
-		return error;
+	struct xfs_inode	*ip = XFS_I(dentry->d_inode);
 
 	xfs_iflags_clear(ip, XFS_ITRUNCATED);
 	return -xfs_fsync(ip);
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index da0159d99f82..cd42ef78f6b5 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -57,19 +57,22 @@
 #include <linux/fiemap.h>
 
 /*
- * Bring the atime in the XFS inode uptodate.
- * Used before logging the inode to disk or when the Linux inode goes away.
+ * Bring the timestamps in the XFS inode uptodate.
+ *
+ * Used before writing the inode to disk.
  */
 void
-xfs_synchronize_atime(
+xfs_synchronize_times(
 	xfs_inode_t	*ip)
 {
 	struct inode	*inode = VFS_I(ip);
 
-	if (!(inode->i_state & I_CLEAR)) {
-		ip->i_d.di_atime.t_sec = (__int32_t)inode->i_atime.tv_sec;
-		ip->i_d.di_atime.t_nsec = (__int32_t)inode->i_atime.tv_nsec;
-	}
+	ip->i_d.di_atime.t_sec = (__int32_t)inode->i_atime.tv_sec;
+	ip->i_d.di_atime.t_nsec = (__int32_t)inode->i_atime.tv_nsec;
+	ip->i_d.di_ctime.t_sec = (__int32_t)inode->i_ctime.tv_sec;
+	ip->i_d.di_ctime.t_nsec = (__int32_t)inode->i_ctime.tv_nsec;
+	ip->i_d.di_mtime.t_sec = (__int32_t)inode->i_mtime.tv_sec;
+	ip->i_d.di_mtime.t_nsec = (__int32_t)inode->i_mtime.tv_nsec;
 }
 
 /*
@@ -106,32 +109,20 @@ xfs_ichgtime(
 	if ((flags & XFS_ICHGTIME_MOD) &&
 	    !timespec_equal(&inode->i_mtime, &tv)) {
 		inode->i_mtime = tv;
-		ip->i_d.di_mtime.t_sec = (__int32_t)tv.tv_sec;
-		ip->i_d.di_mtime.t_nsec = (__int32_t)tv.tv_nsec;
 		sync_it = 1;
 	}
 	if ((flags & XFS_ICHGTIME_CHG) &&
 	    !timespec_equal(&inode->i_ctime, &tv)) {
 		inode->i_ctime = tv;
-		ip->i_d.di_ctime.t_sec = (__int32_t)tv.tv_sec;
-		ip->i_d.di_ctime.t_nsec = (__int32_t)tv.tv_nsec;
 		sync_it = 1;
 	}
 
 	/*
-	 * We update the i_update_core field _after_ changing
-	 * the timestamps in order to coordinate properly with
-	 * xfs_iflush() so that we don't lose timestamp updates.
-	 * This keeps us from having to hold the inode lock
-	 * while doing this.  We use the SYNCHRONIZE macro to
-	 * ensure that the compiler does not reorder the update
-	 * of i_update_core above the timestamp updates above.
+	 * Update complete - now make sure everyone knows that the inode
+	 * is dirty.
 	 */
-	if (sync_it) {
-		SYNCHRONIZE();
-		ip->i_update_core = 1;
+	if (sync_it)
 		xfs_mark_inode_dirty_sync(ip);
-	}
 }
 
 /*
@@ -506,10 +497,8 @@ xfs_vn_getattr(
 	stat->gid = ip->i_d.di_gid;
 	stat->ino = ip->i_ino;
 	stat->atime = inode->i_atime;
-	stat->mtime.tv_sec = ip->i_d.di_mtime.t_sec;
-	stat->mtime.tv_nsec = ip->i_d.di_mtime.t_nsec;
-	stat->ctime.tv_sec = ip->i_d.di_ctime.t_sec;
-	stat->ctime.tv_nsec = ip->i_d.di_ctime.t_nsec;
+	stat->mtime = inode->i_mtime;
+	stat->ctime = inode->i_ctime;
 	stat->blocks =
 		XFS_FSB_TO_BB(mp, ip->i_d.di_nblocks + ip->i_delayed_blks);
 
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 49e4a6aea73c..072050f8d346 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -667,7 +667,7 @@ start:
 		xip->i_new_size = new_size;
 
 	if (likely(!(ioflags & IO_INVIS)))
-		xfs_ichgtime(xip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
+		file_update_time(file);
 
 	/*
 	 * If the offset is beyond the size of the file, we have a couple
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index bdd41c8c342f..18a4b8e11df2 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -977,6 +977,28 @@ xfs_fs_inode_init_once(
 }
 
 /*
+ * Dirty the XFS inode when mark_inode_dirty_sync() is called so that
+ * we catch unlogged VFS level updates to the inode. Care must be taken
+ * here - the transaction code calls mark_inode_dirty_sync() to mark the
+ * VFS inode dirty in a transaction and clears the i_update_core field;
+ * it must clear the field after calling mark_inode_dirty_sync() to
+ * correctly indicate that the dirty state has been propagated into the
+ * inode log item.
+ *
+ * We need the barrier() to maintain correct ordering between unlogged
+ * updates and the transaction commit code that clears the i_update_core
+ * field. This requires all updates to be completed before marking the
+ * inode dirty.
+ */
+STATIC void
+xfs_fs_dirty_inode(
+	struct inode	*inode)
+{
+	barrier();
+	XFS_I(inode)->i_update_core = 1;
+}
+
+/*
  * Attempt to flush the inode, this will actually fail
  * if the inode is pinned, but we dirty the inode again
  * at the point when it is unpinned after a log write,
@@ -1126,7 +1148,7 @@ xfs_fs_put_super(
 }
 
 STATIC int
-xfs_fs_sync_super(
+xfs_fs_sync_fs(
 	struct super_block	*sb,
 	int			wait)
 {
@@ -1134,23 +1156,23 @@ xfs_fs_sync_super(
 	int			error;
 
 	/*
-	 * Treat a sync operation like a freeze.  This is to work
-	 * around a race in sync_inodes() which works in two phases
-	 * - an asynchronous flush, which can write out an inode
-	 * without waiting for file size updates to complete, and a
-	 * synchronous flush, which wont do anything because the
-	 * async flush removed the inode's dirty flag.  Also
-	 * sync_inodes() will not see any files that just have
-	 * outstanding transactions to be flushed because we don't
-	 * dirty the Linux inode until after the transaction I/O
-	 * completes.
+	 * Not much we can do for the first async pass.  Writing out the
+	 * superblock would be counter-productive as we are going to redirty
+	 * when writing out other data and metadata (and writing out a single
+	 * block is quite fast anyway).
+	 *
+	 * Try to asynchronously kick off quota syncing at least.
 	 */
-	if (wait || unlikely(sb->s_frozen == SB_FREEZE_WRITE))
-		error = xfs_quiesce_data(mp);
-	else
-		error = xfs_sync_fsdata(mp, 0);
+	if (!wait) {
+		xfs_qm_sync(mp, SYNC_TRYLOCK);
+		return 0;
+	}
+
+	error = xfs_quiesce_data(mp);
+	if (error)
+		return -error;
 
-	if (unlikely(laptop_mode)) {
+	if (laptop_mode) {
 		int	prev_sync_seq = mp->m_sync_seq;
 
 		/*
@@ -1169,7 +1191,7 @@ xfs_fs_sync_super(
 				mp->m_sync_seq != prev_sync_seq);
 	}
 
-	return -error;
+	return 0;
 }
 
 STATIC int
@@ -1539,10 +1561,11 @@ xfs_fs_get_sb(
 static const struct super_operations xfs_super_operations = {
 	.alloc_inode		= xfs_fs_alloc_inode,
 	.destroy_inode		= xfs_fs_destroy_inode,
+	.dirty_inode		= xfs_fs_dirty_inode,
 	.write_inode		= xfs_fs_write_inode,
 	.clear_inode		= xfs_fs_clear_inode,
 	.put_super		= xfs_fs_put_super,
-	.sync_fs		= xfs_fs_sync_super,
+	.sync_fs		= xfs_fs_sync_fs,
 	.freeze_fs		= xfs_fs_freeze,
 	.statfs			= xfs_fs_statfs,
 	.remount_fs		= xfs_fs_remount,
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 320be6aea492..961df0a22c78 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -309,11 +309,15 @@ xfs_sync_attr(
 STATIC int
 xfs_commit_dummy_trans(
 	struct xfs_mount	*mp,
-	uint			log_flags)
+	uint			flags)
 {
 	struct xfs_inode	*ip = mp->m_rootip;
 	struct xfs_trans	*tp;
 	int			error;
+	int			log_flags = XFS_LOG_FORCE;
+
+	if (flags & SYNC_WAIT)
+		log_flags |= XFS_LOG_SYNC;
 
 	/*
 	 * Put a dummy transaction in the log to tell recovery
@@ -331,13 +335,12 @@ xfs_commit_dummy_trans(
 	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 	xfs_trans_ihold(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-	/* XXX(hch): ignoring the error here.. */
 	error = xfs_trans_commit(tp, 0);
-
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 
+	/* the log force ensures this transaction is pushed to disk */
 	xfs_log_force(mp, 0, log_flags);
-	return 0;
+	return error;
 }
 
 int
@@ -385,7 +388,20 @@ xfs_sync_fsdata(
 	else
 		XFS_BUF_ASYNC(bp);
 
-	return xfs_bwrite(mp, bp);
+	error = xfs_bwrite(mp, bp);
+	if (error)
+		return error;
+
+	/*
+	 * If this is a data integrity sync make sure all pending buffers
+	 * are flushed out for the log coverage check below.
+	 */
+	if (flags & SYNC_WAIT)
+		xfs_flush_buftarg(mp->m_ddev_targp, 1);
+
+	if (xfs_log_need_covered(mp))
+		error = xfs_commit_dummy_trans(mp, flags);
+	return error;
 
  out_brelse:
 	xfs_buf_relse(bp);
@@ -419,14 +435,16 @@ xfs_quiesce_data(
 	/* push non-blocking */
 	xfs_sync_data(mp, 0);
 	xfs_qm_sync(mp, SYNC_TRYLOCK);
-	xfs_filestream_flush(mp);
 
-	/* push and block */
+	/* push and block till complete */
 	xfs_sync_data(mp, SYNC_WAIT);
 	xfs_qm_sync(mp, SYNC_WAIT);
 
+	/* drop inode references pinned by filestreams */
+	xfs_filestream_flush(mp);
+
 	/* write superblock and hoover up shutdown errors */
-	error = xfs_sync_fsdata(mp, 0);
+	error = xfs_sync_fsdata(mp, SYNC_WAIT);
 
 	/* flush data-only devices */
 	if (mp->m_rtdev_targp)
@@ -570,8 +588,6 @@ xfs_sync_worker(
 		/* dgc: errors ignored here */
 		error = xfs_qm_sync(mp, SYNC_TRYLOCK);
 		error = xfs_sync_fsdata(mp, SYNC_TRYLOCK);
-		if (xfs_log_need_covered(mp))
-			error = xfs_commit_dummy_trans(mp, XFS_LOG_FORCE);
 	}
 	mp->m_sync_seq++;
 	wake_up(&mp->m_wait_single_sync_task);
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 4e4276b956e8..5d1a3b98a6e6 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -876,7 +876,6 @@ xfs_dqrele_inode(
 		ip->i_gdquot = NULL;
 	}
 	xfs_iput(ip, XFS_ILOCK_EXCL);
-	IRELE(ip);
 
 	return 0;
 }
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 7465f9ee125f..ab89a7e94a0f 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -206,10 +206,10 @@ xfs_swap_extents(
 	 * process that the file was not changed out from
 	 * under it.
 	 */
-	if ((sbp->bs_ctime.tv_sec != ip->i_d.di_ctime.t_sec) ||
-	    (sbp->bs_ctime.tv_nsec != ip->i_d.di_ctime.t_nsec) ||
-	    (sbp->bs_mtime.tv_sec != ip->i_d.di_mtime.t_sec) ||
-	    (sbp->bs_mtime.tv_nsec != ip->i_d.di_mtime.t_nsec)) {
+	if ((sbp->bs_ctime.tv_sec != VFS_I(ip)->i_ctime.tv_sec) ||
+	    (sbp->bs_ctime.tv_nsec != VFS_I(ip)->i_ctime.tv_nsec) ||
+	    (sbp->bs_mtime.tv_sec != VFS_I(ip)->i_mtime.tv_sec) ||
+	    (sbp->bs_mtime.tv_nsec != VFS_I(ip)->i_mtime.tv_nsec)) {
 		error = XFS_ERROR(EBUSY);
 		goto out_unlock;
 	}
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index fa913e459442..41ad537c49e9 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -854,6 +854,7 @@ xfs_dir2_leaf_getdents(
 			 */
 			ra_want = howmany(bufsize + mp->m_dirblksize,
 					  mp->m_sb.sb_blocksize) - 1;
+			ASSERT(ra_want >= 0);
 
 			/*
 			 * If we don't have as many as we want, and we haven't
@@ -1088,7 +1089,8 @@ xfs_dir2_leaf_getdents(
 		 */
 		ptr += length;
 		curoff += length;
-		bufsize -= length;
+		/* bufsize may have just been a guess; don't go negative */
+		bufsize = bufsize > length ? bufsize - length : 0;
 	}
 
 	/*
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index c1dc7ef5a1d8..b92a4fa2a0a1 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -3068,9 +3068,9 @@ xfs_iflush_int(
 	SYNCHRONIZE();
 
 	/*
-	 * Make sure to get the latest atime from the Linux inode.
+	 * Make sure to get the latest timestamps from the Linux inode.
 	 */
-	xfs_synchronize_atime(ip);
+	xfs_synchronize_times(ip);
 
 	if (XFS_TEST_ERROR(be16_to_cpu(dip->di_magic) != XFS_DINODE_MAGIC,
 			       mp, XFS_ERRTAG_IFLUSH_1, XFS_RANDOM_IFLUSH_1)) {
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 0b38b9a869ec..41555de1d1db 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -504,7 +504,7 @@ void		xfs_ichgtime(xfs_inode_t *, int);
 void		xfs_lock_inodes(xfs_inode_t **, int, uint);
 void		xfs_lock_two_inodes(xfs_inode_t *, xfs_inode_t *, uint);
 
-void		xfs_synchronize_atime(xfs_inode_t *);
+void		xfs_synchronize_times(xfs_inode_t *);
 void		xfs_mark_inode_dirty_sync(xfs_inode_t *);
 
 #if defined(XFS_INODE_TRACE)
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 47d5b663c37e..9794b876d6ff 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -232,6 +232,15 @@ xfs_inode_item_format(
 	nvecs	     = 1;
 
 	/*
+	 * Make sure the linux inode is dirty. We do this before
+	 * clearing i_update_core as the VFS will call back into
+	 * XFS here and set i_update_core, so we need to dirty the
+	 * inode first so that the ordering of i_update_core and
+	 * unlogged modifications still works as described below.
+	 */
+	xfs_mark_inode_dirty_sync(ip);
+
+	/*
 	 * Clear i_update_core if the timestamps (or any other
 	 * non-transactional modification) need flushing/logging
 	 * and we're about to log them with the rest of the core.
@@ -263,14 +272,9 @@ xfs_inode_item_format(
 	}
 
 	/*
-	 * Make sure to get the latest atime from the Linux inode.
+	 * Make sure to get the latest timestamps from the Linux inode.
 	 */
-	xfs_synchronize_atime(ip);
-
-	/*
-	 * make sure the linux inode is dirty
-	 */
-	xfs_mark_inode_dirty_sync(ip);
+	xfs_synchronize_times(ip);
 
 	vecp->i_addr = (xfs_caddr_t)&ip->i_d;
 	vecp->i_len  = sizeof(struct xfs_icdinode);
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index b68f9107e26c..62efab2f3839 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -59,6 +59,7 @@ xfs_bulkstat_one_iget(
 {
 	xfs_icdinode_t	*dic;	/* dinode core info pointer */
 	xfs_inode_t	*ip;		/* incore inode pointer */
+	struct inode	*inode;
 	int		error;
 
 	error = xfs_iget(mp, NULL, ino,
@@ -72,6 +73,7 @@ xfs_bulkstat_one_iget(
 	ASSERT(ip->i_imap.im_blkno != 0);
 
 	dic = &ip->i_d;
+	inode = VFS_I(ip);
 
 	/* xfs_iget returns the following without needing
 	 * further change.
@@ -83,16 +85,19 @@ xfs_bulkstat_one_iget(
 	buf->bs_uid = dic->di_uid;
 	buf->bs_gid = dic->di_gid;
 	buf->bs_size = dic->di_size;
+
 	/*
-	 * We are reading the atime from the Linux inode because the
-	 * dinode might not be uptodate.
+	 * We need to read the timestamps from the Linux inode because
+	 * the VFS keeps writing directly into the inode structure instead
+	 * of telling us about the updates.
 	 */
-	buf->bs_atime.tv_sec = VFS_I(ip)->i_atime.tv_sec;
-	buf->bs_atime.tv_nsec = VFS_I(ip)->i_atime.tv_nsec;
-	buf->bs_mtime.tv_sec = dic->di_mtime.t_sec;
-	buf->bs_mtime.tv_nsec = dic->di_mtime.t_nsec;
-	buf->bs_ctime.tv_sec = dic->di_ctime.t_sec;
-	buf->bs_ctime.tv_nsec = dic->di_ctime.t_nsec;
+	buf->bs_atime.tv_sec = inode->i_atime.tv_sec;
+	buf->bs_atime.tv_nsec = inode->i_atime.tv_nsec;
+	buf->bs_mtime.tv_sec = inode->i_mtime.tv_sec;
+	buf->bs_mtime.tv_nsec = inode->i_mtime.tv_nsec;
+	buf->bs_ctime.tv_sec = inode->i_ctime.tv_sec;
+	buf->bs_ctime.tv_nsec = inode->i_ctime.tv_nsec;
+
 	buf->bs_xflags = xfs_ip2xflags(ip);
 	buf->bs_extsize = dic->di_extsize << mp->m_sb.sb_blocklog;
 	buf->bs_extents = dic->di_nextents;
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index a434f287962d..b572f7e840e0 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -2476,12 +2476,6 @@ xfs_reclaim(
 	ASSERT(XFS_FORCED_SHUTDOWN(ip->i_mount) || ip->i_delayed_blks == 0);
 
 	/*
-	 * Make sure the atime in the XFS inode is correct before freeing the
-	 * Linux inode.
-	 */
-	xfs_synchronize_atime(ip);
-
-	/*
 	 * If we have nothing to flush with this inode then complete the
 	 * teardown now, otherwise break the link between the xfs inode and the
 	 * linux inode and clean up the xfs inode later. This avoids flushing
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 9cca3785cab8..66d6106a2067 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -1,6 +1,7 @@
 #ifndef _ASM_GENERIC_GPIO_H
 #define _ASM_GENERIC_GPIO_H
 
+#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 
diff --git a/include/asm-generic/hardirq.h b/include/asm-generic/hardirq.h
index 23bb4dad4962..62f59080e5cc 100644
--- a/include/asm-generic/hardirq.h
+++ b/include/asm-generic/hardirq.h
@@ -6,7 +6,7 @@
 #include <linux/irq.h>
 
 typedef struct {
-	unsigned long __softirq_pending;
+	unsigned int __softirq_pending;
 } ____cacheline_aligned irq_cpustat_t;
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index ae1e9e166959..b69347b8904f 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -387,6 +387,7 @@ struct drm_crtc {
  * @get_modes: get mode list for this connector
  * @set_property: property for this connector may need update
  * @destroy: make object go away
+ * @force: notify the driver the connector is forced on
  *
  * Each CRTC may have one or more connectors attached to it.  The functions
  * below allow the core DRM code to control connectors, enumerate available modes,
@@ -401,6 +402,7 @@ struct drm_connector_funcs {
 	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
 			     uint64_t val);
 	void (*destroy)(struct drm_connector *connector);
+	void (*force)(struct drm_connector *connector);
 };
 
 struct drm_encoder_funcs {
@@ -429,6 +431,13 @@ struct drm_encoder {
 	void *helper_private;
 };
 
+enum drm_connector_force {
+	DRM_FORCE_UNSPECIFIED,
+	DRM_FORCE_OFF,
+	DRM_FORCE_ON,         /* force on analog part normally */
+	DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
+};
+
 /**
  * drm_connector - central DRM connector control structure
  * @crtc: CRTC this connector is currently connected to, NULL if none
@@ -478,9 +487,12 @@ struct drm_connector {
 
 	void *helper_private;
 
+	/* forced on connector */
+	enum drm_connector_force force;
 	uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
 	uint32_t force_encoder_id;
 	struct drm_encoder *encoder; /* currently active encoder */
+	void *fb_helper_private;
 };
 
 /**
@@ -746,7 +758,7 @@ extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
 extern bool drm_detect_hdmi_monitor(struct edid *edid);
 extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
 				int hdisplay, int vdisplay, int vrefresh,
-				bool reduced, bool interlaced);
+				bool reduced, bool interlaced, bool margins);
 extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
 				int hdisplay, int vdisplay, int vrefresh,
 				bool interlaced, int margins);
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index 4c8dacaf4f58..b29e20168b5f 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -39,6 +39,7 @@
 
 #include <linux/fb.h>
 
+#include "drm_fb_helper.h"
 struct drm_crtc_helper_funcs {
 	/*
 	 * Control power levels on the CRTC.  If the mode passed in is
@@ -60,6 +61,9 @@ struct drm_crtc_helper_funcs {
 	/* Move the crtc on the current fb to the given position *optional* */
 	int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
 			     struct drm_framebuffer *old_fb);
+
+	/* reload the current crtc LUT */
+	void (*load_lut)(struct drm_crtc *crtc);
 };
 
 struct drm_encoder_helper_funcs {
@@ -119,10 +123,11 @@ static inline void drm_encoder_helper_add(struct drm_encoder *encoder,
 	encoder->helper_private = (void *)funcs;
 }
 
-static inline void drm_connector_helper_add(struct drm_connector *connector,
+static inline int drm_connector_helper_add(struct drm_connector *connector,
 					    const struct drm_connector_helper_funcs *funcs)
 {
 	connector->helper_private = (void *)funcs;
+	return drm_fb_helper_add_connector(connector);
 }
 
 extern int drm_helper_resume_force_mode(struct drm_device *dev);
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 88fffbdfa26f..58c892a2cbfa 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -35,9 +35,30 @@ struct drm_fb_helper_crtc {
 	struct drm_mode_set mode_set;
 };
 
+
 struct drm_fb_helper_funcs {
 	void (*gamma_set)(struct drm_crtc *crtc, u16 red, u16 green,
 			  u16 blue, int regno);
+	void (*gamma_get)(struct drm_crtc *crtc, u16 *red, u16 *green,
+			  u16 *blue, int regno);
+};
+
+/* mode specified on the command line */
+struct drm_fb_helper_cmdline_mode {
+	bool specified;
+	bool refresh_specified;
+	bool bpp_specified;
+	int xres, yres;
+	int bpp;
+	int refresh;
+	bool rb;
+	bool interlace;
+	bool cvt;
+	bool margins;
+};
+
+struct drm_fb_helper_connector {
+	struct drm_fb_helper_cmdline_mode cmdline_mode;
 };
 
 struct drm_fb_helper {
@@ -52,11 +73,14 @@ struct drm_fb_helper {
 };
 
 int drm_fb_helper_single_fb_probe(struct drm_device *dev,
+				  int preferred_bpp,
 				  int (*fb_create)(struct drm_device *dev,
 						   uint32_t fb_width,
 						   uint32_t fb_height,
 						   uint32_t surface_width,
 						   uint32_t surface_height,
+						   uint32_t surface_depth,
+						   uint32_t surface_bpp,
 						   struct drm_framebuffer **fb_ptr));
 int drm_fb_helper_init_crtc_count(struct drm_fb_helper *helper, int crtc_count,
 				  int max_conn);
@@ -77,6 +101,11 @@ int drm_fb_helper_setcolreg(unsigned regno,
 void drm_fb_helper_restore(void);
 void drm_fb_helper_fill_var(struct fb_info *info, struct drm_framebuffer *fb,
 			    uint32_t fb_width, uint32_t fb_height);
-void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch);
+void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
+			    uint32_t depth);
+
+int drm_fb_helper_add_connector(struct drm_connector *connector);
+int drm_fb_helper_parse_command_line(struct drm_device *dev);
+int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info);
 
 #endif
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 3f6e545609be..e6f3b120f51a 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -80,7 +80,7 @@
 	{0x1002, 0x5158, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200}, \
 	{0x1002, 0x5159, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
 	{0x1002, 0x515A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
-	{0x1002, 0x515E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+	{0x1002, 0x515E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_SINGLE_CRTC}, \
 	{0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
@@ -113,7 +113,7 @@
 	{0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
-	{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+	{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_SINGLE_CRTC}, \
 	{0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_IGPGART}, \
 	{0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
 	{0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_IGPGART}, \
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index cff4a101f266..1feed71551c9 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -126,6 +126,7 @@ header-y += nfs_mount.h
 header-y += nl80211.h
 header-y += param.h
 header-y += pci_regs.h
+header-y += perf_event.h
 header-y += pfkeyv2.h
 header-y += pg.h
 header-y += phantom.h
@@ -363,6 +364,7 @@ unifdef-y += utsname.h
 unifdef-y += videodev2.h
 unifdef-y += videodev.h
 unifdef-y += virtio_config.h
+unifdef-y += virtio_ids.h
 unifdef-y += virtio_blk.h
 unifdef-y += virtio_net.h
 unifdef-y += virtio_9p.h
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 6299a259ed19..4fb357312b3b 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -334,9 +334,12 @@ enum {
 	SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
 
 	/* SETFEATURE Sector counts for SATA features */
-	SATA_AN			= 0x05,  /* Asynchronous Notification */
-	SATA_DIPM		= 0x03,  /* Device Initiated Power Management */
-	SATA_FPDMA_AA		= 0x02,  /* DMA Setup FIS Auto-Activate */
+	SATA_FPDMA_OFFSET	= 0x01,	/* FPDMA non-zero buffer offsets */
+	SATA_FPDMA_AA		= 0x02, /* FPDMA Setup FIS Auto-Activate */
+	SATA_DIPM		= 0x03,	/* Device Initiated Power Management */
+	SATA_FPDMA_IN_ORDER	= 0x04,	/* FPDMA in-order data delivery */
+	SATA_AN			= 0x05,	/* Asynchronous Notification */
+	SATA_SSP		= 0x06,	/* Software Settings Preservation */
 
 	/* feature values for SET_MAX */
 	ATA_SET_MAX_ADDR	= 0x00,
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index 086e5c362d3a..817b23705c91 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -397,7 +397,7 @@ struct atmdev_ops { /* only send is required */
 	int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
 	    void __user *optval,int optlen);
 	int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
-	    void __user *optval,int optlen);
+	    void __user *optval,unsigned int optlen);
 	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
 	int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
 	void (*phy_put)(struct atm_dev *dev,unsigned char value,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index e23a86cae5ac..221cecd86bd3 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -82,7 +82,6 @@ enum rq_cmd_type_bits {
 enum {
 	REQ_LB_OP_EJECT	= 0x40,		/* eject request */
 	REQ_LB_OP_FLUSH = 0x41,		/* flush request */
-	REQ_LB_OP_DISCARD = 0x42,	/* discard sectors */
 };
 
 /*
@@ -261,7 +260,6 @@ typedef void (request_fn_proc) (struct request_queue *q);
 typedef int (make_request_fn) (struct request_queue *q, struct bio *bio);
 typedef int (prep_rq_fn) (struct request_queue *, struct request *);
 typedef void (unplug_fn) (struct request_queue *);
-typedef int (prepare_discard_fn) (struct request_queue *, struct request *);
 
 struct bio_vec;
 struct bvec_merge_data {
@@ -313,6 +311,7 @@ struct queue_limits {
 	unsigned int		alignment_offset;
 	unsigned int		io_min;
 	unsigned int		io_opt;
+	unsigned int		max_discard_sectors;
 
 	unsigned short		logical_block_size;
 	unsigned short		max_hw_segments;
@@ -340,7 +339,6 @@ struct request_queue
 	make_request_fn		*make_request_fn;
 	prep_rq_fn		*prep_rq_fn;
 	unplug_fn		*unplug_fn;
-	prepare_discard_fn	*prepare_discard_fn;
 	merge_bvec_fn		*merge_bvec_fn;
 	prepare_flush_fn	*prepare_flush_fn;
 	softirq_done_fn		*softirq_done_fn;
@@ -460,6 +458,7 @@ struct request_queue
 #define QUEUE_FLAG_VIRT        QUEUE_FLAG_NONROT /* paravirt device */
 #define QUEUE_FLAG_IO_STAT     15	/* do IO stats */
 #define QUEUE_FLAG_CQ	       16	/* hardware does queuing */
+#define QUEUE_FLAG_DISCARD     17	/* supports DISCARD */
 
 #define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
 				 (1 << QUEUE_FLAG_CLUSTER) |		\
@@ -591,6 +590,7 @@ enum {
 #define blk_queue_flushing(q)	((q)->ordseq)
 #define blk_queue_stackable(q)	\
 	test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
+#define blk_queue_discard(q)	test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
 
 #define blk_fs_request(rq)	((rq)->cmd_type == REQ_TYPE_FS)
 #define blk_pc_request(rq)	((rq)->cmd_type == REQ_TYPE_BLOCK_PC)
@@ -929,6 +929,8 @@ extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
 extern void blk_queue_max_phys_segments(struct request_queue *, unsigned short);
 extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short);
 extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
+extern void blk_queue_max_discard_sectors(struct request_queue *q,
+		unsigned int max_discard_sectors);
 extern void blk_queue_logical_block_size(struct request_queue *, unsigned short);
 extern void blk_queue_physical_block_size(struct request_queue *, unsigned short);
 extern void blk_queue_alignment_offset(struct request_queue *q,
@@ -955,7 +957,6 @@ extern void blk_queue_merge_bvec(struct request_queue *, merge_bvec_fn *);
 extern void blk_queue_dma_alignment(struct request_queue *, int);
 extern void blk_queue_update_dma_alignment(struct request_queue *, int);
 extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
-extern void blk_queue_set_discard(struct request_queue *, prepare_discard_fn *);
 extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
 extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
 extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
@@ -1080,25 +1081,37 @@ static inline unsigned int queue_physical_block_size(struct request_queue *q)
 	return q->limits.physical_block_size;
 }
 
+static inline int bdev_physical_block_size(struct block_device *bdev)
+{
+	return queue_physical_block_size(bdev_get_queue(bdev));
+}
+
 static inline unsigned int queue_io_min(struct request_queue *q)
 {
 	return q->limits.io_min;
 }
 
+static inline int bdev_io_min(struct block_device *bdev)
+{
+	return queue_io_min(bdev_get_queue(bdev));
+}
+
 static inline unsigned int queue_io_opt(struct request_queue *q)
 {
 	return q->limits.io_opt;
 }
 
+static inline int bdev_io_opt(struct block_device *bdev)
+{
+	return queue_io_opt(bdev_get_queue(bdev));
+}
+
 static inline int queue_alignment_offset(struct request_queue *q)
 {
-	if (q && q->limits.misaligned)
+	if (q->limits.misaligned)
 		return -1;
 
-	if (q && q->limits.alignment_offset)
-		return q->limits.alignment_offset;
-
-	return 0;
+	return q->limits.alignment_offset;
 }
 
 static inline int queue_sector_alignment_offset(struct request_queue *q,
@@ -1108,6 +1121,19 @@ static inline int queue_sector_alignment_offset(struct request_queue *q,
 		& (q->limits.io_min - 1);
 }
 
+static inline int bdev_alignment_offset(struct block_device *bdev)
+{
+	struct request_queue *q = bdev_get_queue(bdev);
+
+	if (q->limits.misaligned)
+		return -1;
+
+	if (bdev != bdev->bd_contains)
+		return bdev->bd_part->alignment_offset;
+
+	return q->limits.alignment_offset;
+}
+
 static inline int queue_dma_alignment(struct request_queue *q)
 {
 	return q ? q->dma_alignment : 511;
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 7e4350ece0f8..3b73b9992b26 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -198,6 +198,7 @@ extern int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
 			   char __user *arg);
 extern int blk_trace_startstop(struct request_queue *q, int start);
 extern int blk_trace_remove(struct request_queue *q);
+extern void blk_trace_remove_sysfs(struct device *dev);
 extern int blk_trace_init_sysfs(struct device *dev);
 
 extern struct attribute_group blk_trace_attr_group;
@@ -211,6 +212,7 @@ extern struct attribute_group blk_trace_attr_group;
 # define blk_trace_startstop(q, start)			(-ENOTTY)
 # define blk_trace_remove(q)				(-ENOTTY)
 # define blk_add_trace_msg(q, fmt, ...)			do { } while (0)
+# define blk_trace_remove_sysfs(dev)			do { } while (0)
 static inline int blk_trace_init_sysfs(struct device *dev)
 {
 	return 0;
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index b62bb9294d0c..0008dee66514 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -37,7 +37,7 @@ extern void cgroup_exit(struct task_struct *p, int run_callbacks);
 extern int cgroupstats_build(struct cgroupstats *stats,
 				struct dentry *dentry);
 
-extern struct file_operations proc_cgroup_operations;
+extern const struct file_operations proc_cgroup_operations;
 
 /* Define the enumeration of all cgroup subsystems */
 #define SUBSYS(_x) _x ## _subsys_id,
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 47ebf416f512..3a14615fd35c 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -132,11 +132,8 @@ struct cn_callback_id {
 };
 
 struct cn_callback_data {
-	void (*destruct_data) (void *);
-	void *ddata;
-	
-	void *callback_priv;
-	void (*callback) (struct cn_msg *);
+	struct sk_buff *skb;
+	void (*callback) (struct cn_msg *, struct netlink_skb_parms *);
 
 	void *free;
 };
@@ -167,11 +164,11 @@ struct cn_dev {
 	struct cn_queue_dev *cbdev;
 };
 
-int cn_add_callback(struct cb_id *, char *, void (*callback) (struct cn_msg *));
+int cn_add_callback(struct cb_id *, char *, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 void cn_del_callback(struct cb_id *);
 int cn_netlink_send(struct cn_msg *, u32, gfp_t);
 
-int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(struct cn_msg *));
+int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
 void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);
 
 int queue_cn_work(struct cn_callback_entry *cbq, struct work_struct *work);
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 44717eb47639..79a2340d83cd 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -291,8 +291,15 @@ struct global_attr {
 int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
 int cpufreq_update_policy(unsigned int cpu);
 
+#ifdef CONFIG_CPU_FREQ
 /* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */
 unsigned int cpufreq_get(unsigned int cpu);
+#else
+static inline unsigned int cpufreq_get(unsigned int cpu)
+{
+	return 0;
+}
+#endif
 
 /* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */
 #ifdef CONFIG_CPU_FREQ
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 45a937be6d38..90a4ed0ea0e5 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -361,6 +361,7 @@ typedef struct elf64_shdr {
 #define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
 #define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
 #define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
+#define NT_PRXSTATUS	0x300		/* s390 upper register halves */
 
 
 /* Note header in a PT_NOTE section */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 2adaa2529f18..2620a8c63571 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -300,6 +300,10 @@ struct inodes_stat_t {
 #define BLKTRACESTOP _IO(0x12,117)
 #define BLKTRACETEARDOWN _IO(0x12,118)
 #define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
 
 #define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
 #define FIBMAP	   _IO(0x00,1)	/* bmap access */
@@ -2446,7 +2450,7 @@ static int __fops ## _open(struct inode *inode, struct file *file)	\
 	__simple_attr_check_format(__fmt, 0ull);			\
 	return simple_attr_open(inode, file, __get, __set, __fmt);	\
 }									\
-static struct file_operations __fops = {				\
+static const struct file_operations __fops = {				\
 	.owner	 = THIS_MODULE,						\
 	.open	 = __fops ## _open,					\
 	.release = simple_attr_release,					\
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index cd3d2abaf30a..0b4f97d24d7f 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -241,7 +241,7 @@ extern void ftrace_enable_daemon(void);
 # define ftrace_set_filter(buf, len, reset)	do { } while (0)
 # define ftrace_disable_daemon()		do { } while (0)
 # define ftrace_enable_daemon()			do { } while (0)
-static inline void ftrace_release(void *start, unsigned long size) { }
+static inline void ftrace_release_mod(struct module *mod) {}
 static inline int register_ftrace_command(struct ftrace_func_command *cmd)
 {
 	return -EINVAL;
diff --git a/include/linux/futex.h b/include/linux/futex.h
index 8ec17997d94f..1e5a26d79232 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -33,8 +33,8 @@
 #define FUTEX_LOCK_PI_PRIVATE	(FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
 #define FUTEX_UNLOCK_PI_PRIVATE	(FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
 #define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITS | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITS | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
 #define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
 					 FUTEX_PRIVATE_FLAG)
 #define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 2d02dfd7076c..508824ee35e6 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -349,11 +349,11 @@ struct twl4030_madc_platform_data {
 	int		irq_line;
 };
 
-/* Boards have uniqe mappings of {col, row} --> keycode.
- * Column and row are 4 bits, but range only from 0..7.
+/* Boards have uniqe mappings of {row, col} --> keycode.
+ * Column and row are 8 bits each, but range only from 0..7.
  * a PERSISTENT_KEY is "always on" and never reported.
  */
-#define PERSISTENT_KEY(c, r)	KEY((c), (r), KEY_RESERVED)
+#define PERSISTENT_KEY(r, c)	KEY((r), (c), KEY_RESERVED)
 
 struct twl4030_keypad_data {
 	const struct matrix_keymap_data *keymap_data;
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 5eb9b0f857e0..5a9aae4adb44 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -44,7 +44,7 @@ struct ip_tunnel_prl {
 	__u16			flags;
 	__u16			__reserved;
 	__u32			datalen;
-	__u32			rs_delay;
+	__u32			__reserved2;
 	/* data follows */
 };
 
diff --git a/include/linux/init.h b/include/linux/init.h
index 400adbb45414..ff8bde520d03 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -271,6 +271,7 @@ void __init parse_early_options(char *cmdline);
 #else /* MODULE */
 
 /* Don't use these in modules, but some people do... */
+#define early_initcall(fn)		module_init(fn)
 #define core_initcall(fn)		module_init(fn)
 #define postcore_initcall(fn)		module_init(fn)
 #define arch_initcall(fn)		module_init(fn)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index b78cf8194957..7ca72b74eec7 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -10,7 +10,6 @@
 #include <linux/irqreturn.h>
 #include <linux/irqnr.h>
 #include <linux/hardirq.h>
-#include <linux/sched.h>
 #include <linux/irqflags.h>
 #include <linux/smp.h>
 #include <linux/percpu.h>
@@ -610,6 +609,7 @@ extern void debug_poll_all_shared_irqs(void);
 static inline void debug_poll_all_shared_irqs(void) { }
 #endif
 
+struct seq_file;
 int show_interrupts(struct seq_file *p, void *v);
 
 struct irq_desc;
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 52695d3dfd0b..f1011f7f3d41 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -464,9 +464,9 @@ struct handle_s
  */
 struct transaction_chp_stats_s {
 	unsigned long		cs_chp_time;
-	unsigned long		cs_forced_to_close;
-	unsigned long		cs_written;
-	unsigned long		cs_dropped;
+	__u32			cs_forced_to_close;
+	__u32			cs_written;
+	__u32			cs_dropped;
 };
 
 /* The transaction_t type is the guts of the journaling mechanism.  It
@@ -668,23 +668,16 @@ struct transaction_run_stats_s {
 	unsigned long		rs_flushing;
 	unsigned long		rs_logging;
 
-	unsigned long		rs_handle_count;
-	unsigned long		rs_blocks;
-	unsigned long		rs_blocks_logged;
+	__u32			rs_handle_count;
+	__u32			rs_blocks;
+	__u32			rs_blocks_logged;
 };
 
 struct transaction_stats_s {
-	int 			ts_type;
 	unsigned long		ts_tid;
-	union {
-		struct transaction_run_stats_s run;
-		struct transaction_chp_stats_s chp;
-	} u;
+	struct transaction_run_stats_s run;
 };
 
-#define JBD2_STATS_RUN		1
-#define JBD2_STATS_CHECKPOINT	2
-
 static inline unsigned long
 jbd2_time_diff(unsigned long start, unsigned long end)
 {
@@ -988,12 +981,6 @@ struct journal_s
 	/*
 	 * Journal statistics
 	 */
-	struct transaction_stats_s *j_history;
-	int			j_history_max;
-	int			j_history_cur;
-	/*
-	 * Protect the transactions statistics history
-	 */
 	spinlock_t		j_history_lock;
 	struct proc_dir_entry	*j_proc_entry;
 	struct transaction_stats_s j_stats;
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index d3cd23f30039..f4e3184fa054 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -659,6 +659,12 @@ extern int do_sysinfo(struct sysinfo *info);
 
 #endif /* __KERNEL__ */
 
+#ifndef __EXPORTED_HEADERS__
+#ifndef __KERNEL__
+#warning Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders
+#endif /* __KERNEL__ */
+#endif /* __EXPORTED_HEADERS__ */
+
 #define SI_LOAD_SHIFT	16
 struct sysinfo {
 	long uptime;			/* Seconds since boot */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 76319bf03e37..87698640c091 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -418,6 +418,17 @@ enum {
 				  ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
 				  ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
 				  ATA_TIMING_UDMA,
+
+	/* ACPI constants */
+	ATA_ACPI_FILTER_SETXFER	= 1 << 0,
+	ATA_ACPI_FILTER_LOCK	= 1 << 1,
+	ATA_ACPI_FILTER_DIPM	= 1 << 2,
+	ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3,	/* FPDMA non-zero offset */
+	ATA_ACPI_FILTER_FPDMA_AA = 1 << 4,	/* FPDMA auto activate */
+
+	ATA_ACPI_FILTER_DEFAULT	= ATA_ACPI_FILTER_SETXFER |
+				  ATA_ACPI_FILTER_LOCK |
+				  ATA_ACPI_FILTER_DIPM,
 };
 
 enum ata_xfer_mask {
@@ -587,6 +598,7 @@ struct ata_device {
 #ifdef CONFIG_ATA_ACPI
 	acpi_handle		acpi_handle;
 	union acpi_object	*gtf_cache;
+	unsigned int		gtf_filter;
 #endif
 	/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
 	u64			n_sectors;	/* size of device, if ATA */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 81bb42358595..eaf36364b7d4 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -11,6 +11,7 @@
 #define LINUX_MMC_HOST_H
 
 #include <linux/leds.h>
+#include <linux/sched.h>
 
 #include <linux/mmc/core.h>
 
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 6547c3cdbc4c..82a9124f7d75 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -37,7 +37,6 @@ typedef int (*param_set_fn)(const char *val, struct kernel_param *kp);
 typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp);
 
 /* Flag bits for kernel_param.flags */
-#define KPARAM_KMALLOCED	1
 #define KPARAM_ISBOOL		2
 
 struct kernel_param {
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 0d45b4e8d367..08bc776d05e2 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -145,14 +145,14 @@ static inline int ip_mroute_opt(int opt)
 #endif
 
 #ifdef CONFIG_IP_MROUTE
-extern int ip_mroute_setsockopt(struct sock *, int, char __user *, int);
+extern int ip_mroute_setsockopt(struct sock *, int, char __user *, unsigned int);
 extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
 extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg);
 extern int ip_mr_init(void);
 #else
 static inline
 int ip_mroute_setsockopt(struct sock *sock,
-			 int optname, char __user *optval, int optlen)
+			 int optname, char __user *optval, unsigned int optlen)
 {
 	return -ENOPROTOOPT;
 }
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 43dc97e32183..b191865a6ca3 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -134,7 +134,7 @@ static inline int ip6_mroute_opt(int opt)
 struct sock;
 
 #ifdef CONFIG_IPV6_MROUTE
-extern int ip6_mroute_setsockopt(struct sock *, int, char __user *, int);
+extern int ip6_mroute_setsockopt(struct sock *, int, char __user *, unsigned int);
 extern int ip6_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
 extern int ip6_mr_input(struct sk_buff *skb);
 extern int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg);
@@ -143,7 +143,7 @@ extern void ip6_mr_cleanup(void);
 #else
 static inline
 int ip6_mroute_setsockopt(struct sock *sock,
-			  int optname, char __user *optval, int optlen)
+			  int optname, char __user *optval, unsigned int optlen)
 {
 	return -ENOPROTOOPT;
 }
diff --git a/include/linux/net.h b/include/linux/net.h
index 9040a10584f7..529a0931711d 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -178,11 +178,11 @@ struct proto_ops {
 	int		(*listen)    (struct socket *sock, int len);
 	int		(*shutdown)  (struct socket *sock, int flags);
 	int		(*setsockopt)(struct socket *sock, int level,
-				      int optname, char __user *optval, int optlen);
+				      int optname, char __user *optval, unsigned int optlen);
 	int		(*getsockopt)(struct socket *sock, int level,
 				      int optname, char __user *optval, int __user *optlen);
 	int		(*compat_setsockopt)(struct socket *sock, int level,
-				      int optname, char __user *optval, int optlen);
+				      int optname, char __user *optval, unsigned int optlen);
 	int		(*compat_getsockopt)(struct socket *sock, int level,
 				      int optname, char __user *optval, int __user *optlen);
 	int		(*sendmsg)   (struct kiocb *iocb, struct socket *sock,
@@ -256,7 +256,7 @@ extern int kernel_getpeername(struct socket *sock, struct sockaddr *addr,
 extern int kernel_getsockopt(struct socket *sock, int level, int optname,
 			     char *optval, int *optlen);
 extern int kernel_setsockopt(struct socket *sock, int level, int optname,
-			     char *optval, int optlen);
+			     char *optval, unsigned int optlen);
 extern int kernel_sendpage(struct socket *sock, struct page *page, int offset,
 			   size_t size, int flags);
 extern int kernel_sock_ioctl(struct socket *sock, int cmd, unsigned long arg);
@@ -313,7 +313,7 @@ SOCKCALL_WRAP(name, compat_ioctl, (struct socket *sock, unsigned int cmd, \
 SOCKCALL_WRAP(name, listen, (struct socket *sock, int len), (sock, len)) \
 SOCKCALL_WRAP(name, shutdown, (struct socket *sock, int flags), (sock, flags)) \
 SOCKCALL_WRAP(name, setsockopt, (struct socket *sock, int level, int optname, \
-			 char __user *optval, int optlen), (sock, level, optname, optval, optlen)) \
+			 char __user *optval, unsigned int optlen), (sock, level, optname, optval, optlen)) \
 SOCKCALL_WRAP(name, getsockopt, (struct socket *sock, int level, int optname, \
 			 char __user *optval, int __user *optlen), (sock, level, optname, optval, optlen)) \
 SOCKCALL_WRAP(name, sendmsg, (struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t len), \
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 94958c109761..812a5f3c2abe 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -557,7 +557,7 @@ struct netdev_queue {
  *	Callback uses when the transmitter has not made any progress
  *	for dev->watchdog ticks.
  *
- * struct net_device_stats* (*get_stats)(struct net_device *dev);
+ * struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
  *	Called when a user wants to get the network device usage
  *	statistics. If not defined, the counters in dev->stats will
  *	be used.
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 48cfe51bfddc..6132b5e6d9d3 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -221,12 +221,12 @@ __ret;})
 
 /* Call setsockopt() */
 int nf_setsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt,
-		  int len);
+		  unsigned int len);
 int nf_getsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt,
 		  int *len);
 
 int compat_nf_setsockopt(struct sock *sk, u_int8_t pf, int optval,
-		char __user *opt, int len);
+		char __user *opt, unsigned int len);
 int compat_nf_getsockopt(struct sock *sk, u_int8_t pf, int optval,
 		char __user *opt, int *len);
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index da1fda8623e0..b0f0f3851cd4 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -379,9 +379,6 @@
 #define PCI_DEVICE_ID_ATI_IXP600_IDE	0x438c
 #define PCI_DEVICE_ID_ATI_IXP700_SATA	0x4390
 #define PCI_DEVICE_ID_ATI_IXP700_IDE	0x439c
-/* AMD SB Chipset */
-#define PCI_DEVICE_ID_AMD_SB900_IDE	 0x780c
-#define PCI_DEVICE_ID_AMD_SB900_SATA_IDE 0x7800
 
 #define PCI_VENDOR_ID_VLSI		0x1004
 #define PCI_DEVICE_ID_VLSI_82C592	0x0005
@@ -485,6 +482,9 @@
 #define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361
 #define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL	0x252
 
+#define PCI_SUBVENDOR_ID_IBM		0x1014
+#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT	0x03d4
+
 #define PCI_VENDOR_ID_UNISYS		0x1018
 #define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C
 
@@ -553,9 +553,10 @@
 #define PCI_DEVICE_ID_AMD_CS5536_UDC    0x2096
 #define PCI_DEVICE_ID_AMD_CS5536_UOC    0x2097
 #define PCI_DEVICE_ID_AMD_CS5536_IDE    0x209A
-
 #define PCI_DEVICE_ID_AMD_LX_VIDEO  0x2081
 #define PCI_DEVICE_ID_AMD_LX_AES    0x2082
+#define PCI_DEVICE_ID_AMD_HUDSON2_IDE		0x780c
+#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE	0x7800
 
 #define PCI_VENDOR_ID_TRIDENT		0x1023
 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
@@ -776,6 +777,7 @@
 #define PCI_DEVICE_ID_TI_X515		0x8036
 #define PCI_DEVICE_ID_TI_XX12		0x8039
 #define PCI_DEVICE_ID_TI_XX12_FM	0x803b
+#define PCI_DEVICE_ID_TI_XIO2000A	0x8231
 #define PCI_DEVICE_ID_TI_1130		0xac12
 #define PCI_DEVICE_ID_TI_1031		0xac13
 #define PCI_DEVICE_ID_TI_1131		0xac15
@@ -2161,6 +2163,10 @@
 #define PCI_DEVICE_ID_ADDIDATA_APCI7420_3      0x700D
 #define PCI_DEVICE_ID_ADDIDATA_APCI7300_3      0x700E
 #define PCI_DEVICE_ID_ADDIDATA_APCI7800_3      0x700F
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7300       0x7010
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7420       0x7011
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7500       0x7012
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7800       0x7013
 
 #define PCI_VENDOR_ID_PDC		0x15e9
 
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 3a9d36d1e92a..2e6d95f97419 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -442,6 +442,7 @@ enum perf_callchain_context {
 #include <linux/hrtimer.h>
 #include <linux/fs.h>
 #include <linux/pid_namespace.h>
+#include <linux/workqueue.h>
 #include <asm/atomic.h>
 
 #define PERF_MAX_STACK_DEPTH		255
@@ -513,6 +514,10 @@ struct file;
 
 struct perf_mmap_data {
 	struct rcu_head			rcu_head;
+#ifdef CONFIG_PERF_USE_VMALLOC
+	struct work_struct		work;
+#endif
+	int				data_order;
 	int				nr_pages;	/* nr of data pages  */
 	int				writable;	/* are we writable   */
 	int				nr_locked;	/* nr pages mlocked  */
diff --git a/include/linux/poll.h b/include/linux/poll.h
index fa287f25138d..6673743946f7 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -6,10 +6,10 @@
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
+#include <linux/ktime.h>
 #include <linux/wait.h>
 #include <linux/string.h>
 #include <linux/fs.h>
-#include <linux/sched.h>
 #include <asm/uaccess.h>
 
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index 931150566ade..a3baeb2c2161 100644
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -88,6 +88,18 @@
 #define PR_TASK_PERF_EVENTS_DISABLE		31
 #define PR_TASK_PERF_EVENTS_ENABLE		32
 
+/*
+ * Set early/late kill mode for hwpoison memory corruption.
+ * This influences when the process gets killed on a memory corruption.
+ */
 #define PR_MCE_KILL	33
+# define PR_MCE_KILL_CLEAR   0
+# define PR_MCE_KILL_SET     1
+
+# define PR_MCE_KILL_LATE    0
+# define PR_MCE_KILL_EARLY   1
+# define PR_MCE_KILL_DEFAULT 2
+
+#define PR_MCE_KILL_GET 34
 
 #endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 6fe0363724e9..3ebd0b7bcb08 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -77,7 +77,7 @@ extern int rcu_scheduler_active;
 #error "Unknown RCU implementation specified to kernel configuration"
 #endif
 
-#define RCU_HEAD_INIT 	{ .next = NULL, .func = NULL }
+#define RCU_HEAD_INIT	{ .next = NULL, .func = NULL }
 #define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT
 #define INIT_RCU_HEAD(ptr) do { \
        (ptr)->next = NULL; (ptr)->func = NULL; \
@@ -129,12 +129,6 @@ static inline void rcu_read_lock(void)
 	rcu_read_acquire();
 }
 
-/**
- * rcu_read_unlock - marks the end of an RCU read-side critical section.
- *
- * See rcu_read_lock() for more information.
- */
-
 /*
  * So where is rcu_write_lock()?  It does not exist, as there is no
  * way for writers to lock out RCU readers.  This is a feature, not
@@ -144,6 +138,12 @@ static inline void rcu_read_lock(void)
  * used as well.  RCU does not care how the writers keep out of each
  * others' way, as long as they do so.
  */
+
+/**
+ * rcu_read_unlock - marks the end of an RCU read-side critical section.
+ *
+ * See rcu_read_lock() for more information.
+ */
 static inline void rcu_read_unlock(void)
 {
 	rcu_read_release();
@@ -196,6 +196,8 @@ static inline void rcu_read_lock_sched(void)
 	__acquire(RCU_SCHED);
 	rcu_read_acquire();
 }
+
+/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
 static inline notrace void rcu_read_lock_sched_notrace(void)
 {
 	preempt_disable_notrace();
@@ -213,6 +215,8 @@ static inline void rcu_read_unlock_sched(void)
 	__release(RCU_SCHED);
 	preempt_enable();
 }
+
+/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
 static inline notrace void rcu_read_unlock_sched_notrace(void)
 {
 	__release(RCU_SCHED);
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 37682770e9d2..9642c6bcb399 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -30,10 +30,14 @@
 #ifndef __LINUX_RCUTREE_H
 #define __LINUX_RCUTREE_H
 
+struct notifier_block;
+
 extern void rcu_sched_qs(int cpu);
 extern void rcu_bh_qs(int cpu);
-
+extern int rcu_cpu_notify(struct notifier_block *self,
+			  unsigned long action, void *hcpu);
 extern int rcu_needs_cpu(int cpu);
+extern int rcu_expedited_torture_stats(char *page);
 
 #ifdef CONFIG_TREE_PREEMPT_RCU
 
@@ -72,11 +76,7 @@ static inline void __rcu_read_unlock_bh(void)
 
 extern void call_rcu_sched(struct rcu_head *head,
 			   void (*func)(struct rcu_head *rcu));
-
-static inline void synchronize_rcu_expedited(void)
-{
-	synchronize_sched_expedited();
-}
+extern void synchronize_rcu_expedited(void);
 
 static inline void synchronize_rcu_bh_expedited(void)
 {
@@ -85,16 +85,11 @@ static inline void synchronize_rcu_bh_expedited(void)
 
 extern void __rcu_init(void);
 extern void rcu_check_callbacks(int cpu, int user);
-extern void rcu_restart_cpu(int cpu);
 
 extern long rcu_batches_completed(void);
 extern long rcu_batches_completed_bh(void);
 extern long rcu_batches_completed_sched(void);
 
-static inline void rcu_init_sched(void)
-{
-}
-
 #ifdef CONFIG_NO_HZ
 void rcu_enter_nohz(void);
 void rcu_exit_nohz(void);
@@ -107,7 +102,7 @@ static inline void rcu_exit_nohz(void)
 }
 #endif /* CONFIG_NO_HZ */
 
-/* A context switch is a grace period for rcutree. */
+/* A context switch is a grace period for RCU-sched and RCU-bh. */
 static inline int rcu_blocking_is_gp(void)
 {
 	return num_online_cpus() == 1;
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 731af71cddc9..fcb9884df618 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -114,8 +114,7 @@ void res_counter_init(struct res_counter *counter, struct res_counter *parent);
 int __must_check res_counter_charge_locked(struct res_counter *counter,
 		unsigned long val);
 int __must_check res_counter_charge(struct res_counter *counter,
-		unsigned long val, struct res_counter **limit_fail_at,
-		struct res_counter **soft_limit_at);
+		unsigned long val, struct res_counter **limit_fail_at);
 
 /*
  * uncharge - tell that some portion of the resource is released
@@ -128,8 +127,7 @@ int __must_check res_counter_charge(struct res_counter *counter,
  */
 
 void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val);
-void res_counter_uncharge(struct res_counter *counter, unsigned long val,
-				bool *was_soft_limit_excess);
+void res_counter_uncharge(struct res_counter *counter, unsigned long val);
 
 static inline bool res_counter_limit_check_locked(struct res_counter *cnt)
 {
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index fe661afe0713..db532ce288be 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -176,6 +176,9 @@
 /* Qualcomm MSM SoCs */
 #define PORT_MSM	88
 
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX	89
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 3b461dffe244..3273a0c5043b 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -16,7 +16,7 @@ struct __kernel_sockaddr_storage {
 				/* _SS_MAXSIZE value minus size of ss_family */
 } __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
 
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#ifdef __KERNEL__
 
 #include <asm/socket.h>			/* arch-dependent defines	*/
 #include <linux/sockios.h>		/* the SIOCxxx I/O controls	*/
@@ -101,21 +101,6 @@ struct cmsghdr {
 			      ((char *)(cmsg) - (char *)(mhdr)->msg_control)))
 
 /*
- *	This mess will go away with glibc
- */
- 
-#ifdef __KERNEL__
-#define __KINLINE static inline
-#elif  defined(__GNUC__) 
-#define __KINLINE static __inline__
-#elif defined(__cplusplus)
-#define __KINLINE static inline
-#else
-#define __KINLINE static
-#endif
-
-
-/*
  *	Get the next cmsg header
  *
  *	PLEASE, do not touch this function. If you think, that it is
@@ -128,7 +113,7 @@ struct cmsghdr {
  *	ancillary object DATA.				--ANK (980731)
  */
  
-__KINLINE struct cmsghdr * __cmsg_nxthdr(void *__ctl, __kernel_size_t __size,
+static inline struct cmsghdr * __cmsg_nxthdr(void *__ctl, __kernel_size_t __size,
 					       struct cmsghdr *__cmsg)
 {
 	struct cmsghdr * __ptr;
@@ -140,7 +125,7 @@ __KINLINE struct cmsghdr * __cmsg_nxthdr(void *__ctl, __kernel_size_t __size,
 	return __ptr;
 }
 
-__KINLINE struct cmsghdr * cmsg_nxthdr (struct msghdr *__msg, struct cmsghdr *__cmsg)
+static inline struct cmsghdr * cmsg_nxthdr (struct msghdr *__msg, struct cmsghdr *__cmsg)
 {
 	return __cmsg_nxthdr(__msg->msg_control, __msg->msg_controllen, __cmsg);
 }
diff --git a/include/linux/string.h b/include/linux/string.h
index 489019ef1694..b8508868d5ad 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -62,7 +62,7 @@ extern char * strnchr(const char *, size_t, int);
 #ifndef __HAVE_ARCH_STRRCHR
 extern char * strrchr(const char *,int);
 #endif
-extern char * strstrip(char *);
+extern char * __must_check strstrip(char *);
 #ifndef __HAVE_ARCH_STRSTR
 extern char * strstr(const char *,const char *);
 #endif
diff --git a/include/linux/topology.h b/include/linux/topology.h
index fc0bf3edeb67..57e63579bfdd 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -129,7 +129,7 @@ int arch_update_cpu_topology(void);
 				| 1*SD_BALANCE_FORK			\
 				| 0*SD_BALANCE_WAKE			\
 				| 1*SD_WAKE_AFFINE			\
-				| 1*SD_PREFER_LOCAL			\
+				| 0*SD_PREFER_LOCAL			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 1*SD_SHARE_PKG_RESOURCES		\
 				| 0*SD_SERIALIZE			\
@@ -162,7 +162,7 @@ int arch_update_cpu_topology(void);
 				| 1*SD_BALANCE_FORK			\
 				| 0*SD_BALANCE_WAKE			\
 				| 1*SD_WAKE_AFFINE			\
-				| 1*SD_PREFER_LOCAL			\
+				| 0*SD_PREFER_LOCAL			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_SHARE_PKG_RESOURCES		\
 				| 0*SD_SERIALIZE			\
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index c17eb64d7213..ce911ebf91e8 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -150,6 +150,7 @@ struct usb_serial {
 	struct usb_interface		*interface;
 	unsigned char			disconnected:1;
 	unsigned char			suspending:1;
+	unsigned char			attached:1;
 	unsigned char			minor;
 	unsigned char			num_ports;
 	unsigned char			num_port_pointers;
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
index ea7226a45acb..095e10d148b4 100644
--- a/include/linux/virtio_9p.h
+++ b/include/linux/virtio_9p.h
@@ -2,6 +2,7 @@
 #define _LINUX_VIRTIO_9P_H
 /* This header is BSD licensed so anyone can use the definitions to implement
  * compatible drivers/servers. */
+#include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 
 /* Maximum number of virtio channels per partition (1 for now) */
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
index 09d730085060..1418f048cb34 100644
--- a/include/linux/virtio_balloon.h
+++ b/include/linux/virtio_balloon.h
@@ -2,6 +2,7 @@
 #define _LINUX_VIRTIO_BALLOON_H
 /* This header is BSD licensed so anyone can use the definitions to implement
  * compatible drivers/servers. */
+#include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 
 /* The feature bitmap for virtio balloon */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index 15cb666581d7..fd294c56d571 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -3,6 +3,7 @@
 /* This header is BSD licensed so anyone can use the definitions to implement
  * compatible drivers/servers. */
 #include <linux/types.h>
+#include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 
 /* Feature bits */
@@ -13,11 +14,8 @@
 #define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
 #define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
 #define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
-#define VIRTIO_BLK_F_IDENTIFY	8	/* ATA IDENTIFY supported */
 #define VIRTIO_BLK_F_FLUSH	9	/* Cache flush command support */
 
-#define VIRTIO_BLK_ID_BYTES	(sizeof(__u16[256]))	/* IDENTIFY DATA */
-
 struct virtio_blk_config {
 	/* The capacity (in 512-byte sectors). */
 	__u64 capacity;
@@ -33,7 +31,6 @@ struct virtio_blk_config {
 	} geometry;
 	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
 	__u32 blk_size;
-	__u8 identify[VIRTIO_BLK_ID_BYTES];
 } __attribute__((packed));
 
 /*
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index b5f519806014..fe885174cc1f 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,6 +1,7 @@
 #ifndef _LINUX_VIRTIO_CONSOLE_H
 #define _LINUX_VIRTIO_CONSOLE_H
 #include <linux/types.h>
+#include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
  * anyone can use the definitions to implement compatible drivers/servers. */
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 1f41734bbb77..085e42298ce5 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -3,6 +3,7 @@
 /* This header is BSD licensed so anyone can use the definitions to implement
  * compatible drivers/servers. */
 #include <linux/types.h>
+#include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 #include <linux/if_ether.h>
 
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
index 48121c3c434b..c4d5de896f0c 100644
--- a/include/linux/virtio_rng.h
+++ b/include/linux/virtio_rng.h
@@ -2,6 +2,7 @@
 #define _LINUX_VIRTIO_RNG_H
 /* This header is BSD licensed so anyone can use the definitions to implement
  * compatible drivers/servers. */
+#include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 
 #endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 7ef0c7b94f31..cf24c20de9e4 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -207,6 +207,7 @@ extern int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
 
 extern void flush_workqueue(struct workqueue_struct *wq);
 extern void flush_scheduled_work(void);
+extern void flush_delayed_work(struct delayed_work *work);
 
 extern int schedule_work(struct work_struct *work);
 extern int schedule_work_on(int cpu, struct work_struct *work);
diff --git a/include/net/compat.h b/include/net/compat.h
index 5bbf8bf9efea..7c3002832d05 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -40,8 +40,8 @@ extern int put_cmsg_compat(struct msghdr*, int, int, int, void *);
 
 extern int cmsghdr_from_user_compat_to_kern(struct msghdr *, struct sock *, unsigned char *, int);
 
-extern int compat_mc_setsockopt(struct sock *, int, int, char __user *, int,
-	int (*)(struct sock *, int, int, char __user *, int));
+extern int compat_mc_setsockopt(struct sock *, int, int, char __user *, unsigned int,
+	int (*)(struct sock *, int, int, char __user *, unsigned int));
 extern int compat_mc_getsockopt(struct sock *, int, int, char __user *,
 	int __user *, int (*)(struct sock *, int, int, char __user *,
 				int __user *));
diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h
index 03cffd9f64e3..696d6e4ce68a 100644
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -48,13 +48,13 @@ struct inet_connection_sock_af_ops {
 	u16	    net_header_len;
 	u16	    sockaddr_len;
 	int	    (*setsockopt)(struct sock *sk, int level, int optname, 
-				  char __user *optval, int optlen);
+				  char __user *optval, unsigned int optlen);
 	int	    (*getsockopt)(struct sock *sk, int level, int optname, 
 				  char __user *optval, int __user *optlen);
 #ifdef CONFIG_COMPAT
 	int	    (*compat_setsockopt)(struct sock *sk,
 				int level, int optname,
-				char __user *optval, int optlen);
+				char __user *optval, unsigned int optlen);
 	int	    (*compat_getsockopt)(struct sock *sk,
 				int level, int optname,
 				char __user *optval, int __user *optlen);
@@ -332,5 +332,5 @@ extern void inet_csk_addr2sockaddr(struct sock *sk, struct sockaddr *uaddr);
 extern int inet_csk_compat_getsockopt(struct sock *sk, int level, int optname,
 				      char __user *optval, int __user *optlen);
 extern int inet_csk_compat_setsockopt(struct sock *sk, int level, int optname,
-				      char __user *optval, int optlen);
+				      char __user *optval, unsigned int optlen);
 #endif /* _INET_CONNECTION_SOCK_H */
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index b63b80fac567..f93ad90a601b 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -130,11 +130,11 @@ struct inet_timewait_sock {
 	__u16			tw_num;
 	kmemcheck_bitfield_begin(flags);
 	/* And these are ours. */
-	__u8			tw_ipv6only:1,
-				tw_transparent:1;
-	/* 14 bits hole, try to pack */
+	unsigned int		tw_ipv6only     : 1,
+				tw_transparent  : 1,
+				tw_pad		: 14,	/* 14 bits hole */
+				tw_ipv6_offset  : 16;
 	kmemcheck_bitfield_end(flags);
-	__u16			tw_ipv6_offset;
 	unsigned long		tw_ttd;
 	struct inet_bind_bucket	*tw_tb;
 	struct hlist_node	tw_death_node;
diff --git a/include/net/ip.h b/include/net/ip.h
index 5b26a0bd178e..2f47e5482b55 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -381,10 +381,10 @@ extern int ip_options_rcv_srr(struct sk_buff *skb);
 extern void	ip_cmsg_recv(struct msghdr *msg, struct sk_buff *skb);
 extern int	ip_cmsg_send(struct net *net,
 			     struct msghdr *msg, struct ipcm_cookie *ipc);
-extern int	ip_setsockopt(struct sock *sk, int level, int optname, char __user *optval, int optlen);
+extern int	ip_setsockopt(struct sock *sk, int level, int optname, char __user *optval, unsigned int optlen);
 extern int	ip_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen);
 extern int	compat_ip_setsockopt(struct sock *sk, int level,
-			int optname, char __user *optval, int optlen);
+			int optname, char __user *optval, unsigned int optlen);
 extern int	compat_ip_getsockopt(struct sock *sk, int level,
 			int optname, char __user *optval, int __user *optlen);
 extern int	ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *));
diff --git a/include/net/ipip.h b/include/net/ipip.h
index 76e3ea6e2fe5..87acf8f3a155 100644
--- a/include/net/ipip.h
+++ b/include/net/ipip.h
@@ -27,18 +27,11 @@ struct ip_tunnel
 	unsigned int			prl_count;	/* # of entries in PRL */
 };
 
-/* ISATAP: default interval between RS in secondy */
-#define IPTUNNEL_RS_DEFAULT_DELAY	(900)
-
 struct ip_tunnel_prl_entry
 {
 	struct ip_tunnel_prl_entry	*next;
 	__be32				addr;
 	u16				flags;
-	unsigned long			rs_delay;
-	struct timer_list		rs_timer;
-	struct ip_tunnel		*tunnel;
-	spinlock_t			lock;
 };
 
 #define IPTUNNEL_XMIT() do {						\
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index ad9a51130254..8c31d8a0c1fe 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -550,7 +550,7 @@ extern int ipv6_find_tlv(struct sk_buff *skb, int offset, int type);
 extern int			ipv6_setsockopt(struct sock *sk, int level, 
 						int optname,
 						char __user *optval, 
-						int optlen);
+						unsigned int optlen);
 extern int			ipv6_getsockopt(struct sock *sk, int level, 
 						int optname,
 						char __user *optval, 
@@ -559,7 +559,7 @@ extern int			compat_ipv6_setsockopt(struct sock *sk,
 						int level,
 						int optname,
 						char __user *optval,
-						int optlen);
+						unsigned int optlen);
 extern int			compat_ipv6_getsockopt(struct sock *sk,
 						int level,
 						int optname,
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 466859b285e1..c75b960c8ac8 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1669,6 +1669,8 @@ void ieee80211_restart_hw(struct ieee80211_hw *hw);
  * to this function and ieee80211_rx_irqsafe() may not be mixed for a
  * single hardware.
  *
+ * Note that right now, this function must be called with softirqs disabled.
+ *
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac80211 after this call
  */
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 42d00ced5eb8..6e5f0e0c7967 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -544,7 +544,7 @@ struct sctp_af {
 					 int level,
 					 int optname,
 					 char __user *optval,
-					 int optlen);
+					 unsigned int optlen);
 	int		(*getsockopt)	(struct sock *sk,
 					 int level,
 					 int optname,
@@ -554,7 +554,7 @@ struct sctp_af {
 					 int level,
 					 int optname,
 					 char __user *optval,
-					 int optlen);
+					 unsigned int optlen);
 	int		(*compat_getsockopt)	(struct sock *sk,
 					 int level,
 					 int optname,
diff --git a/include/net/sock.h b/include/net/sock.h
index 950409dcec3d..9f96394f694e 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -226,12 +226,12 @@ struct sock {
 #define sk_prot			__sk_common.skc_prot
 #define sk_net			__sk_common.skc_net
 	kmemcheck_bitfield_begin(flags);
-	unsigned char		sk_shutdown : 2,
-				sk_no_check : 2,
-				sk_userlocks : 4;
+	unsigned int		sk_shutdown  : 2,
+				sk_no_check  : 2,
+				sk_userlocks : 4,
+				sk_protocol  : 8,
+				sk_type      : 16;
 	kmemcheck_bitfield_end(flags);
-	unsigned char		sk_protocol;
-	unsigned short		sk_type;
 	int			sk_rcvbuf;
 	socket_lock_t		sk_lock;
 	/*
@@ -624,7 +624,7 @@ struct proto {
 	void			(*shutdown)(struct sock *sk, int how);
 	int			(*setsockopt)(struct sock *sk, int level, 
 					int optname, char __user *optval,
-					int optlen);
+					unsigned int optlen);
 	int			(*getsockopt)(struct sock *sk, int level, 
 					int optname, char __user *optval, 
 					int __user *option);  	 
@@ -632,7 +632,7 @@ struct proto {
 	int			(*compat_setsockopt)(struct sock *sk,
 					int level,
 					int optname, char __user *optval,
-					int optlen);
+					unsigned int optlen);
 	int			(*compat_getsockopt)(struct sock *sk,
 					int level,
 					int optname, char __user *optval,
@@ -951,7 +951,7 @@ extern void			sock_rfree(struct sk_buff *skb);
 
 extern int			sock_setsockopt(struct socket *sock, int level,
 						int op, char __user *optval,
-						int optlen);
+						unsigned int optlen);
 
 extern int			sock_getsockopt(struct socket *sock, int level,
 						int op, char __user *optval, 
@@ -993,7 +993,7 @@ extern int                      sock_no_shutdown(struct socket *, int);
 extern int			sock_no_getsockopt(struct socket *, int , int,
 						   char __user *, int __user *);
 extern int			sock_no_setsockopt(struct socket *, int, int,
-						   char __user *, int);
+						   char __user *, unsigned int);
 extern int                      sock_no_sendmsg(struct kiocb *, struct socket *,
 						struct msghdr *, size_t);
 extern int                      sock_no_recvmsg(struct kiocb *, struct socket *,
@@ -1015,11 +1015,11 @@ extern int sock_common_getsockopt(struct socket *sock, int level, int optname,
 extern int sock_common_recvmsg(struct kiocb *iocb, struct socket *sock,
 			       struct msghdr *msg, size_t size, int flags);
 extern int sock_common_setsockopt(struct socket *sock, int level, int optname,
-				  char __user *optval, int optlen);
+				  char __user *optval, unsigned int optlen);
 extern int compat_sock_common_getsockopt(struct socket *sock, int level,
 		int optname, char __user *optval, int __user *optlen);
 extern int compat_sock_common_setsockopt(struct socket *sock, int level,
-		int optname, char __user *optval, int optlen);
+		int optname, char __user *optval, unsigned int optlen);
 
 extern void sk_common_release(struct sock *sk);
 
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 56b76027b85e..03a49c703377 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -394,13 +394,13 @@ extern int			tcp_getsockopt(struct sock *sk, int level,
 					       int __user *optlen);
 extern int			tcp_setsockopt(struct sock *sk, int level, 
 					       int optname, char __user *optval, 
-					       int optlen);
+					       unsigned int optlen);
 extern int			compat_tcp_getsockopt(struct sock *sk,
 					int level, int optname,
 					char __user *optval, int __user *optlen);
 extern int			compat_tcp_setsockopt(struct sock *sk,
 					int level, int optname,
-					char __user *optval, int optlen);
+					char __user *optval, unsigned int optlen);
 extern void			tcp_set_keepalive(struct sock *sk, int val);
 extern int			tcp_recvmsg(struct kiocb *iocb, struct sock *sk,
 					    struct msghdr *msg,
diff --git a/include/net/udp.h b/include/net/udp.h
index 5fb029f817a3..f98abd2ce709 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -144,7 +144,7 @@ extern unsigned int udp_poll(struct file *file, struct socket *sock,
 extern int 	udp_lib_getsockopt(struct sock *sk, int level, int optname,
 			           char __user *optval, int __user *optlen);
 extern int 	udp_lib_setsockopt(struct sock *sk, int level, int optname,
-				   char __user *optval, int optlen,
+				   char __user *optval, unsigned int optlen,
 				   int (*push_pending_frames)(struct sock *));
 
 extern struct sock *udp4_lib_lookup(struct net *net, __be32 saddr, __be16 sport,
diff --git a/include/net/wext.h b/include/net/wext.h
index 6d76a39a9c5b..3f2b94de2cfa 100644
--- a/include/net/wext.h
+++ b/include/net/wext.h
@@ -14,6 +14,7 @@ extern int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cm
 			     void __user *arg);
 extern int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
 				    unsigned long arg);
+extern struct iw_statistics *get_wireless_stats(struct net_device *dev);
 #else
 static inline int wext_proc_init(struct net *net)
 {
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index 9a3b49865173..d696a692d94a 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -279,7 +279,7 @@ extern struct pccard_resource_ops pccard_iodyn_ops;
 extern struct pccard_resource_ops pccard_nonstatic_ops;
 
 /* socket drivers are expected to use these callbacks in their .drv struct */
-extern int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state);
+extern int pcmcia_socket_dev_suspend(struct device *dev);
 extern int pcmcia_socket_dev_resume(struct device *dev);
 
 /* socket drivers use this callback in their IRQ handler */
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 887e57e3e223..a72edd4eceec 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -303,6 +303,7 @@ struct iscsi_session {
 	int			cmds_max;	/* size of cmds array */
 	struct iscsi_task	**cmds;		/* Original Cmds arr */
 	struct iscsi_pool	cmdpool;	/* PDU's pool */
+	void			*dd_data;	/* LLD private data */
 };
 
 enum {
@@ -363,7 +364,7 @@ extern int iscsi_target_alloc(struct scsi_target *starget);
  */
 extern struct iscsi_cls_session *
 iscsi_session_setup(struct iscsi_transport *, struct Scsi_Host *shost,
-		    uint16_t, int, uint32_t, unsigned int);
+		    uint16_t, int, int, uint32_t, unsigned int);
 extern void iscsi_session_teardown(struct iscsi_cls_session *);
 extern void iscsi_session_recovery_timedout(struct iscsi_cls_session *);
 extern int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 084478e14d24..34c46ab5c31b 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -129,6 +129,9 @@ struct scsi_cmnd;
 #define MI_REPORT_TARGET_PGS  0x0a
 /* values for maintenance out */
 #define MO_SET_TARGET_PGS     0x0a
+/* values for variable length command */
+#define READ_32		      0x09
+#define WRITE_32	      0x0b
 
 /* Values for T10/04-262r7 */
 #define	ATA_16		      0x85	/* 16-byte pass-thru */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 3878d1dc7f59..a5e885a111df 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -229,10 +229,6 @@ enum scsi_prot_operations {
 	/* OS-HBA: Protected, HBA-Target: Protected */
 	SCSI_PROT_READ_PASS,
 	SCSI_PROT_WRITE_PASS,
-
-	/* OS-HBA: Protected, HBA-Target: Protected, checksum conversion */
-	SCSI_PROT_READ_CONVERT,
-	SCSI_PROT_WRITE_CONVERT,
 };
 
 static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index b62a097b3ecb..6e728b176904 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -798,9 +798,15 @@ static inline unsigned int scsi_host_get_prot(struct Scsi_Host *shost)
 static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
 {
 	switch (target_type) {
-	case 1: return shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION;
-	case 2: return shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION;
-	case 3: return shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION;
+	case 1:
+		if (shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION)
+			return target_type;
+	case 2:
+		if (shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION)
+			return target_type;
+	case 3:
+		if (shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION)
+			return target_type;
 	}
 
 	return 0;
@@ -808,13 +814,14 @@ static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsign
 
 static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
 {
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
 	switch (target_type) {
 	case 0: return shost->prot_capabilities & SHOST_DIX_TYPE0_PROTECTION;
 	case 1: return shost->prot_capabilities & SHOST_DIX_TYPE1_PROTECTION;
 	case 2: return shost->prot_capabilities & SHOST_DIX_TYPE2_PROTECTION;
 	case 3: return shost->prot_capabilities & SHOST_DIX_TYPE3_PROTECTION;
 	}
-
+#endif
 	return 0;
 }
 
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index d86af94691c2..00405b5f624a 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -488,6 +488,39 @@ TRACE_EVENT(block_remap,
 		  (unsigned long long)__entry->old_sector)
 );
 
+TRACE_EVENT(block_rq_remap,
+
+	TP_PROTO(struct request_queue *q, struct request *rq, dev_t dev,
+		 sector_t from),
+
+	TP_ARGS(q, rq, dev, from),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev		)
+		__field( sector_t,	sector		)
+		__field( unsigned int,	nr_sector	)
+		__field( dev_t,		old_dev		)
+		__field( sector_t,	old_sector	)
+		__array( char,		rwbs,	6	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= disk_devt(rq->rq_disk);
+		__entry->sector		= blk_rq_pos(rq);
+		__entry->nr_sector	= blk_rq_sectors(rq);
+		__entry->old_dev	= dev;
+		__entry->old_sector	= from;
+		blk_fill_rwbs_rq(__entry->rwbs, rq);
+	),
+
+	TP_printk("%d,%d %s %llu + %u <- (%d,%d) %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector,
+		  MAJOR(__entry->old_dev), MINOR(__entry->old_dev),
+		  (unsigned long long)__entry->old_sector)
+);
+
 #endif /* _TRACE_BLOCK_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index c1bd8f1e8b94..d09550bf3f95 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -11,6 +11,7 @@ struct ext4_allocation_context;
 struct ext4_allocation_request;
 struct ext4_prealloc_space;
 struct ext4_inode_info;
+struct mpage_da_data;
 
 #define EXT4_I(inode) (container_of(inode, struct ext4_inode_info, vfs_inode))
 
@@ -236,6 +237,7 @@ TRACE_EVENT(ext4_da_writepages,
 		__field(	char,	for_kupdate		)
 		__field(	char,	for_reclaim		)
 		__field(	char,	range_cyclic		)
+		__field(       pgoff_t,	writeback_index		)
 	),
 
 	TP_fast_assign(
@@ -249,15 +251,17 @@ TRACE_EVENT(ext4_da_writepages,
 		__entry->for_kupdate	= wbc->for_kupdate;
 		__entry->for_reclaim	= wbc->for_reclaim;
 		__entry->range_cyclic	= wbc->range_cyclic;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
 	),
 
-	TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d",
+	TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d writeback_index %lu",
 		  jbd2_dev_to_name(__entry->dev),
 		  (unsigned long) __entry->ino, __entry->nr_to_write,
 		  __entry->pages_skipped, __entry->range_start,
 		  __entry->range_end, __entry->nonblocking,
 		  __entry->for_kupdate, __entry->for_reclaim,
-		  __entry->range_cyclic)
+		  __entry->range_cyclic,
+		  (unsigned long) __entry->writeback_index)
 );
 
 TRACE_EVENT(ext4_da_write_pages,
@@ -309,6 +313,7 @@ TRACE_EVENT(ext4_da_writepages_result,
 		__field(	char,	encountered_congestion	)
 		__field(	char,	more_io			)	
 		__field(	char,	no_nrwrite_index_update )
+		__field(       pgoff_t,	writeback_index		)
 	),
 
 	TP_fast_assign(
@@ -320,14 +325,16 @@ TRACE_EVENT(ext4_da_writepages_result,
 		__entry->encountered_congestion	= wbc->encountered_congestion;
 		__entry->more_io	= wbc->more_io;
 		__entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
 	),
 
-	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d",
+	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d writeback_index %lu",
 		  jbd2_dev_to_name(__entry->dev),
 		  (unsigned long) __entry->ino, __entry->ret,
 		  __entry->pages_written, __entry->pages_skipped,
 		  __entry->encountered_congestion, __entry->more_io,
-		  __entry->no_nrwrite_index_update)
+		  __entry->no_nrwrite_index_update,
+		  (unsigned long) __entry->writeback_index)
 );
 
 TRACE_EVENT(ext4_da_write_begin,
@@ -737,6 +744,169 @@ TRACE_EVENT(ext4_alloc_da_blocks,
 		  __entry->data_blocks, __entry->meta_blocks)
 );
 
+TRACE_EVENT(ext4_mballoc_alloc,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16,	found			)
+		__field(	__u16,	groups			)
+		__field(	__u16,	buddy			)
+		__field(	__u16,	flags			)
+		__field(	__u16,	tail			)
+		__field(	__u8,	cr			)
+		__field(	__u32, 	orig_logical		)
+		__field(	  int,	orig_start		)
+		__field(	__u32, 	orig_group		)
+		__field(	  int,	orig_len		)
+		__field(	__u32, 	goal_logical		)
+		__field(	  int,	goal_start		)
+		__field(	__u32, 	goal_group		)
+		__field(	  int,	goal_len		)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->found		= ac->ac_found;
+		__entry->flags		= ac->ac_flags;
+		__entry->groups		= ac->ac_groups_scanned;
+		__entry->buddy		= ac->ac_buddy;
+		__entry->tail		= ac->ac_tail;
+		__entry->cr		= ac->ac_criteria;
+		__entry->orig_logical	= ac->ac_o_ex.fe_logical;
+		__entry->orig_start	= ac->ac_o_ex.fe_start;
+		__entry->orig_group	= ac->ac_o_ex.fe_group;
+		__entry->orig_len	= ac->ac_o_ex.fe_len;
+		__entry->goal_logical	= ac->ac_g_ex.fe_logical;
+		__entry->goal_start	= ac->ac_g_ex.fe_start;
+		__entry->goal_group	= ac->ac_g_ex.fe_group;
+		__entry->goal_len	= ac->ac_g_ex.fe_len;
+		__entry->result_logical	= ac->ac_f_ex.fe_logical;
+		__entry->result_start	= ac->ac_f_ex.fe_start;
+		__entry->result_group	= ac->ac_f_ex.fe_group;
+		__entry->result_len	= ac->ac_f_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu orig %u/%d/%u@%u goal %u/%d/%u@%u "
+		  "result %u/%d/%u@%u blks %u grps %u cr %u flags 0x%04x "
+		  "tail %u broken %u",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->orig_group, __entry->orig_start,
+		  __entry->orig_len, __entry->orig_logical,
+		  __entry->goal_group, __entry->goal_start,
+		  __entry->goal_len, __entry->goal_logical,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical,
+		  __entry->found, __entry->groups, __entry->cr,
+		  __entry->flags, __entry->tail,
+		  __entry->buddy ? 1 << __entry->buddy : 0)
+);
+
+TRACE_EVENT(ext4_mballoc_prealloc,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	orig_logical		)
+		__field(	  int,	orig_start		)
+		__field(	__u32, 	orig_group		)
+		__field(	  int,	orig_len		)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->orig_logical	= ac->ac_o_ex.fe_logical;
+		__entry->orig_start	= ac->ac_o_ex.fe_start;
+		__entry->orig_group	= ac->ac_o_ex.fe_group;
+		__entry->orig_len	= ac->ac_o_ex.fe_len;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu orig %u/%d/%u@%u result %u/%d/%u@%u",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->orig_group, __entry->orig_start,
+		  __entry->orig_len, __entry->orig_logical,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
+TRACE_EVENT(ext4_mballoc_discard,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu extent %u/%d/%u@%u ",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
+TRACE_EVENT(ext4_mballoc_free,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu extent %u/%d/%u@%u ",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
 #endif /* _TRACE_EXT4_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
index b851f0b4701c..3c60b75adb9e 100644
--- a/include/trace/events/jbd2.h
+++ b/include/trace/events/jbd2.h
@@ -7,6 +7,9 @@
 #include <linux/jbd2.h>
 #include <linux/tracepoint.h>
 
+struct transaction_chp_stats_s;
+struct transaction_run_stats_s;
+
 TRACE_EVENT(jbd2_checkpoint,
 
 	TP_PROTO(journal_t *journal, int result),
@@ -162,6 +165,81 @@ TRACE_EVENT(jbd2_submit_inode_data,
 		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino)
 );
 
+TRACE_EVENT(jbd2_run_stats,
+	TP_PROTO(dev_t dev, unsigned long tid,
+		 struct transaction_run_stats_s *stats),
+
+	TP_ARGS(dev, tid, stats),
+
+	TP_STRUCT__entry(
+		__field(		dev_t,	dev		)
+		__field(	unsigned long,	tid		)
+		__field(	unsigned long,	wait		)
+		__field(	unsigned long,	running		)
+		__field(	unsigned long,	locked		)
+		__field(	unsigned long,	flushing	)
+		__field(	unsigned long,	logging		)
+		__field(		__u32,	handle_count	)
+		__field(		__u32,	blocks		)
+		__field(		__u32,	blocks_logged	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= dev;
+		__entry->tid		= tid;
+		__entry->wait		= stats->rs_wait;
+		__entry->running	= stats->rs_running;
+		__entry->locked		= stats->rs_locked;
+		__entry->flushing	= stats->rs_flushing;
+		__entry->logging	= stats->rs_logging;
+		__entry->handle_count	= stats->rs_handle_count;
+		__entry->blocks		= stats->rs_blocks;
+		__entry->blocks_logged	= stats->rs_blocks_logged;
+	),
+
+	TP_printk("dev %s tid %lu wait %u running %u locked %u flushing %u "
+		  "logging %u handle_count %u blocks %u blocks_logged %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->tid,
+		  jiffies_to_msecs(__entry->wait),
+		  jiffies_to_msecs(__entry->running),
+		  jiffies_to_msecs(__entry->locked),
+		  jiffies_to_msecs(__entry->flushing),
+		  jiffies_to_msecs(__entry->logging),
+		  __entry->handle_count, __entry->blocks,
+		  __entry->blocks_logged)
+);
+
+TRACE_EVENT(jbd2_checkpoint_stats,
+	TP_PROTO(dev_t dev, unsigned long tid,
+		 struct transaction_chp_stats_s *stats),
+
+	TP_ARGS(dev, tid, stats),
+
+	TP_STRUCT__entry(
+		__field(		dev_t,	dev		)
+		__field(	unsigned long,	tid		)
+		__field(	unsigned long,	chp_time	)
+		__field(		__u32,	forced_to_close	)
+		__field(		__u32,	written		)
+		__field(		__u32,	dropped		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= dev;
+		__entry->tid		= tid;
+		__entry->chp_time	= stats->cs_chp_time;
+		__entry->forced_to_close= stats->cs_forced_to_close;
+		__entry->written	= stats->cs_written;
+		__entry->dropped	= stats->cs_dropped;
+	),
+
+	TP_printk("dev %s tid %lu chp_time %u forced_to_close %u "
+		  "written %u dropped %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->tid,
+		  jiffies_to_msecs(__entry->chp_time),
+		  __entry->forced_to_close, __entry->written, __entry->dropped)
+);
+
 #endif /* _TRACE_JBD2_H */
 
 /* This part must be outside protection */
diff --git a/init/Kconfig b/init/Kconfig
index c7bac39d6c61..f51586406d62 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -297,7 +297,7 @@ config AUDIT
 
 config AUDITSYSCALL
 	bool "Enable system-call auditing support"
-	depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH)
+	depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH)
 	default y if SECURITY_SELINUX
 	help
 	  Enable low-overhead system-call auditing infrastructure that
@@ -921,6 +921,11 @@ config HAVE_PERF_EVENTS
 	help
 	  See tools/perf/design.txt for details.
 
+config PERF_USE_VMALLOC
+	bool
+	help
+	  See tools/perf/design.txt for details
+
 menu "Kernel Performance Events And Counters"
 
 config PERF_EVENTS
@@ -976,6 +981,19 @@ config PERF_COUNTERS
 
 	  Say N if unsure.
 
+config DEBUG_PERF_USE_VMALLOC
+	default n
+	bool "Debug: use vmalloc to back perf mmap() buffers"
+	depends on PERF_EVENTS && DEBUG_KERNEL
+	select PERF_USE_VMALLOC
+	help
+	 Use vmalloc memory to back perf mmap() buffers.
+
+	 Mostly useful for debugging the vmalloc code on platforms
+	 that don't require it.
+
+	 Say N if unsure.
+
 endmenu
 
 config VM_EVENT_COUNTERS
diff --git a/init/main.c b/init/main.c
index 7449819a4805..5988debfc505 100644
--- a/init/main.c
+++ b/init/main.c
@@ -778,7 +778,6 @@ static void __init do_initcalls(void)
  */
 static void __init do_basic_setup(void)
 {
-	rcu_init_sched(); /* needed by module_init stage. */
 	init_workqueues();
 	cpuset_init_smp();
 	usermodehelper_init();
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 7ccba4bc5e3b..0249f4be9b5c 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -703,7 +703,7 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode);
 static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry);
 static int cgroup_populate_dir(struct cgroup *cgrp);
 static const struct inode_operations cgroup_dir_inode_operations;
-static struct file_operations proc_cgroupstats_operations;
+static const struct file_operations proc_cgroupstats_operations;
 
 static struct backing_dev_info cgroup_backing_dev_info = {
 	.name		= "cgroup",
@@ -1710,14 +1710,13 @@ static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft,
 		return -EFAULT;
 
 	buffer[nbytes] = 0;     /* nul-terminate */
-	strstrip(buffer);
 	if (cft->write_u64) {
-		u64 val = simple_strtoull(buffer, &end, 0);
+		u64 val = simple_strtoull(strstrip(buffer), &end, 0);
 		if (*end)
 			return -EINVAL;
 		retval = cft->write_u64(cgrp, cft, val);
 	} else {
-		s64 val = simple_strtoll(buffer, &end, 0);
+		s64 val = simple_strtoll(strstrip(buffer), &end, 0);
 		if (*end)
 			return -EINVAL;
 		retval = cft->write_s64(cgrp, cft, val);
@@ -1753,8 +1752,7 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft,
 	}
 
 	buffer[nbytes] = 0;     /* nul-terminate */
-	strstrip(buffer);
-	retval = cft->write_string(cgrp, cft, buffer);
+	retval = cft->write_string(cgrp, cft, strstrip(buffer));
 	if (!retval)
 		retval = nbytes;
 out:
@@ -1863,7 +1861,7 @@ static int cgroup_seqfile_release(struct inode *inode, struct file *file)
 	return single_release(inode, file);
 }
 
-static struct file_operations cgroup_seqfile_operations = {
+static const struct file_operations cgroup_seqfile_operations = {
 	.read = seq_read,
 	.write = cgroup_file_write,
 	.llseek = seq_lseek,
@@ -1922,7 +1920,7 @@ static int cgroup_rename(struct inode *old_dir, struct dentry *old_dentry,
 	return simple_rename(old_dir, old_dentry, new_dir, new_dentry);
 }
 
-static struct file_operations cgroup_file_operations = {
+static const struct file_operations cgroup_file_operations = {
 	.read = cgroup_file_read,
 	.write = cgroup_file_write,
 	.llseek = generic_file_llseek,
@@ -3369,7 +3367,7 @@ static int cgroup_open(struct inode *inode, struct file *file)
 	return single_open(file, proc_cgroup_show, pid);
 }
 
-struct file_operations proc_cgroup_operations = {
+const struct file_operations proc_cgroup_operations = {
 	.open		= cgroup_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -3398,7 +3396,7 @@ static int cgroupstats_open(struct inode *inode, struct file *file)
 	return single_open(file, proc_cgroupstats_show, NULL);
 }
 
-static struct file_operations proc_cgroupstats_operations = {
+static const struct file_operations proc_cgroupstats_operations = {
 	.open = cgroupstats_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -3708,8 +3706,10 @@ static void check_for_release(struct cgroup *cgrp)
 void __css_put(struct cgroup_subsys_state *css)
 {
 	struct cgroup *cgrp = css->cgroup;
+	int val;
 	rcu_read_lock();
-	if (atomic_dec_return(&css->refcnt) == 1) {
+	val = atomic_dec_return(&css->refcnt);
+	if (val == 1) {
 		if (notify_on_release(cgrp)) {
 			set_bit(CGRP_RELEASABLE, &cgrp->flags);
 			check_for_release(cgrp);
@@ -3717,6 +3717,7 @@ void __css_put(struct cgroup_subsys_state *css)
 		cgroup_wakeup_rmdir_waiter(cgrp);
 	}
 	rcu_read_unlock();
+	WARN_ON_ONCE(val < 1);
 }
 
 /*
diff --git a/kernel/exit.c b/kernel/exit.c
index 5859f598c951..f7864ac2ecc1 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -359,10 +359,8 @@ void __set_special_pids(struct pid *pid)
 {
 	struct task_struct *curr = current->group_leader;
 
-	if (task_session(curr) != pid) {
+	if (task_session(curr) != pid)
 		change_pid(curr, PIDTYPE_SID, pid);
-		proc_sid_connector(curr);
-	}
 
 	if (task_pgrp(curr) != pid)
 		change_pid(curr, PIDTYPE_PGID, pid);
@@ -991,8 +989,6 @@ NORET_TYPE void do_exit(long code)
 	tsk->mempolicy = NULL;
 #endif
 #ifdef CONFIG_FUTEX
-	if (unlikely(!list_empty(&tsk->pi_state_list)))
-		exit_pi_state_list(tsk);
 	if (unlikely(current->pi_state_cache))
 		kfree(current->pi_state_cache);
 #endif
diff --git a/kernel/fork.c b/kernel/fork.c
index 266c6af6ef1b..4c20fff8c13a 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -570,12 +570,18 @@ void mm_release(struct task_struct *tsk, struct mm_struct *mm)
 
 	/* Get rid of any futexes when releasing the mm */
 #ifdef CONFIG_FUTEX
-	if (unlikely(tsk->robust_list))
+	if (unlikely(tsk->robust_list)) {
 		exit_robust_list(tsk);
+		tsk->robust_list = NULL;
+	}
 #ifdef CONFIG_COMPAT
-	if (unlikely(tsk->compat_robust_list))
+	if (unlikely(tsk->compat_robust_list)) {
 		compat_exit_robust_list(tsk);
+		tsk->compat_robust_list = NULL;
+	}
 #endif
+	if (unlikely(!list_empty(&tsk->pi_state_list)))
+		exit_pi_state_list(tsk);
 #endif
 
 	/* Get rid of any cached register state */
diff --git a/kernel/futex.c b/kernel/futex.c
index b911adceb2c4..642f3bbaacc7 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -150,7 +150,8 @@ static struct futex_hash_bucket *hash_futex(union futex_key *key)
  */
 static inline int match_futex(union futex_key *key1, union futex_key *key2)
 {
-	return (key1->both.word == key2->both.word
+	return (key1 && key2
+		&& key1->both.word == key2->both.word
 		&& key1->both.ptr == key2->both.ptr
 		&& key1->both.offset == key2->both.offset);
 }
@@ -916,8 +917,8 @@ retry:
 	hb1 = hash_futex(&key1);
 	hb2 = hash_futex(&key2);
 
-	double_lock_hb(hb1, hb2);
 retry_private:
+	double_lock_hb(hb1, hb2);
 	op_ret = futex_atomic_op_inuser(op, uaddr2);
 	if (unlikely(op_ret < 0)) {
 
@@ -1028,7 +1029,6 @@ static inline
 void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key,
 			   struct futex_hash_bucket *hb)
 {
-	drop_futex_key_refs(&q->key);
 	get_futex_key_refs(key);
 	q->key = *key;
 
@@ -1226,6 +1226,7 @@ retry_private:
 		 */
 		if (ret == 1) {
 			WARN_ON(pi_state);
+			drop_count++;
 			task_count++;
 			ret = get_futex_value_locked(&curval2, uaddr2);
 			if (!ret)
@@ -1304,6 +1305,7 @@ retry_private:
 			if (ret == 1) {
 				/* We got the lock. */
 				requeue_pi_wake_futex(this, &key2, hb2);
+				drop_count++;
 				continue;
 			} else if (ret) {
 				/* -EDEADLK */
@@ -1791,6 +1793,7 @@ static int futex_wait(u32 __user *uaddr, int fshared,
 					     current->timer_slack_ns);
 	}
 
+retry:
 	/* Prepare to wait on uaddr. */
 	ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
 	if (ret)
@@ -1808,9 +1811,14 @@ static int futex_wait(u32 __user *uaddr, int fshared,
 		goto out_put_key;
 
 	/*
-	 * We expect signal_pending(current), but another thread may
-	 * have handled it for us already.
+	 * We expect signal_pending(current), but we might be the
+	 * victim of a spurious wakeup as well.
 	 */
+	if (!signal_pending(current)) {
+		put_futex_key(fshared, &q.key);
+		goto retry;
+	}
+
 	ret = -ERESTARTSYS;
 	if (!abs_time)
 		goto out_put_key;
@@ -2117,11 +2125,12 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb,
 		 * Unqueue the futex_q and determine which it was.
 		 */
 		plist_del(&q->list, &q->list.plist);
-		drop_futex_key_refs(&q->key);
 
+		/* Handle spurious wakeups gracefully */
+		ret = -EAGAIN;
 		if (timeout && !timeout->task)
 			ret = -ETIMEDOUT;
-		else
+		else if (signal_pending(current))
 			ret = -ERESTARTNOINTR;
 	}
 	return ret;
@@ -2199,6 +2208,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
 	debug_rt_mutex_init_waiter(&rt_waiter);
 	rt_waiter.task = NULL;
 
+retry:
 	key2 = FUTEX_KEY_INIT;
 	ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
 	if (unlikely(ret != 0))
@@ -2293,6 +2303,9 @@ out_put_keys:
 out_key2:
 	put_futex_key(fshared, &key2);
 
+	/* Spurious wakeup ? */
+	if (ret == -EAGAIN)
+		goto retry;
 out:
 	if (to) {
 		hrtimer_cancel(&to->timer);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 6d7020490f94..3e1c36e7998f 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -726,8 +726,6 @@ static int hrtimer_switch_to_hres(void)
 	/* "Retrigger" the interrupt to get things going */
 	retrigger_next_event(NULL);
 	local_irq_restore(flags);
-	printk(KERN_DEBUG "Switched to high resolution mode on CPU %d\n",
-	       smp_processor_id());
 	return 1;
 }
 
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index a81cf80554db..17c71bb565c6 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/irq.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/random.h>
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index cfadc1291d0b..5240d75f4c60 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1333,7 +1333,7 @@ static int __kprobes kprobes_open(struct inode *inode, struct file *filp)
 	return seq_open(filp, &kprobes_seq_ops);
 }
 
-static struct file_operations debugfs_kprobes_operations = {
+static const struct file_operations debugfs_kprobes_operations = {
 	.open           = kprobes_open,
 	.read           = seq_read,
 	.llseek         = seq_lseek,
@@ -1515,7 +1515,7 @@ static ssize_t write_enabled_file_bool(struct file *file,
 	return count;
 }
 
-static struct file_operations fops_kp = {
+static const struct file_operations fops_kp = {
 	.read =         read_enabled_file_bool,
 	.write =        write_enabled_file_bool,
 };
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 3815ac1d58b2..9af56723c096 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -142,6 +142,11 @@ static inline struct lock_class *hlock_class(struct held_lock *hlock)
 #ifdef CONFIG_LOCK_STAT
 static DEFINE_PER_CPU(struct lock_class_stats[MAX_LOCKDEP_KEYS], lock_stats);
 
+static inline u64 lockstat_clock(void)
+{
+	return cpu_clock(smp_processor_id());
+}
+
 static int lock_point(unsigned long points[], unsigned long ip)
 {
 	int i;
@@ -158,7 +163,7 @@ static int lock_point(unsigned long points[], unsigned long ip)
 	return i;
 }
 
-static void lock_time_inc(struct lock_time *lt, s64 time)
+static void lock_time_inc(struct lock_time *lt, u64 time)
 {
 	if (time > lt->max)
 		lt->max = time;
@@ -234,12 +239,12 @@ static void put_lock_stats(struct lock_class_stats *stats)
 static void lock_release_holdtime(struct held_lock *hlock)
 {
 	struct lock_class_stats *stats;
-	s64 holdtime;
+	u64 holdtime;
 
 	if (!lock_stat)
 		return;
 
-	holdtime = sched_clock() - hlock->holdtime_stamp;
+	holdtime = lockstat_clock() - hlock->holdtime_stamp;
 
 	stats = get_lock_stats(hlock_class(hlock));
 	if (hlock->read)
@@ -2792,7 +2797,7 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	hlock->references = references;
 #ifdef CONFIG_LOCK_STAT
 	hlock->waittime_stamp = 0;
-	hlock->holdtime_stamp = sched_clock();
+	hlock->holdtime_stamp = lockstat_clock();
 #endif
 
 	if (check == 2 && !mark_irqflags(curr, hlock))
@@ -3322,7 +3327,7 @@ found_it:
 	if (hlock->instance != lock)
 		return;
 
-	hlock->waittime_stamp = sched_clock();
+	hlock->waittime_stamp = lockstat_clock();
 
 	contention_point = lock_point(hlock_class(hlock)->contention_point, ip);
 	contending_point = lock_point(hlock_class(hlock)->contending_point,
@@ -3345,8 +3350,7 @@ __lock_acquired(struct lockdep_map *lock, unsigned long ip)
 	struct held_lock *hlock, *prev_hlock;
 	struct lock_class_stats *stats;
 	unsigned int depth;
-	u64 now;
-	s64 waittime = 0;
+	u64 now, waittime = 0;
 	int i, cpu;
 
 	depth = curr->lockdep_depth;
@@ -3374,7 +3378,7 @@ found_it:
 
 	cpu = smp_processor_id();
 	if (hlock->waittime_stamp) {
-		now = sched_clock();
+		now = lockstat_clock();
 		waittime = now - hlock->waittime_stamp;
 		hlock->holdtime_stamp = now;
 	}
diff --git a/kernel/module.c b/kernel/module.c
index fe748a86d452..8b7d8805819d 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1992,12 +1992,14 @@ static inline unsigned long layout_symtab(struct module *mod,
 					  Elf_Shdr *sechdrs,
 					  unsigned int symindex,
 					  unsigned int strindex,
-					  const Elf_Hdr *hdr,
+					  const Elf_Ehdr *hdr,
 					  const char *secstrings,
 					  unsigned long *pstroffs,
 					  unsigned long *strmap)
 {
+	return 0;
 }
+
 static inline void add_kallsyms(struct module *mod,
 				Elf_Shdr *sechdrs,
 				unsigned int shnum,
@@ -2081,9 +2083,8 @@ static noinline struct module *load_module(void __user *umod,
 	struct module *mod;
 	long err = 0;
 	void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */
-#ifdef CONFIG_KALLSYMS
 	unsigned long symoffs, stroffs, *strmap;
-#endif
+
 	mm_segment_t old_fs;
 
 	DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n",
diff --git a/kernel/mutex-debug.c b/kernel/mutex-debug.c
index 50d022e5a560..ec815a960b5d 100644
--- a/kernel/mutex-debug.c
+++ b/kernel/mutex-debug.c
@@ -16,6 +16,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/poison.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/kallsyms.h>
 #include <linux/interrupt.h>
diff --git a/kernel/panic.c b/kernel/panic.c
index bcdef26e3332..96b45d0b4ba5 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -90,6 +90,8 @@ NORET_TYPE void panic(const char * fmt, ...)
 
 	atomic_notifier_call_chain(&panic_notifier_list, 0, buf);
 
+	bust_spinlocks(0);
+
 	if (!panic_blink)
 		panic_blink = no_blink;
 
@@ -136,7 +138,6 @@ NORET_TYPE void panic(const char * fmt, ...)
 		mdelay(1);
 		i++;
 	}
-	bust_spinlocks(0);
 }
 
 EXPORT_SYMBOL(panic);
diff --git a/kernel/params.c b/kernel/params.c
index 9da58eabdcb2..d656c276508d 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -218,15 +218,11 @@ int param_set_charp(const char *val, struct kernel_param *kp)
 		return -ENOSPC;
 	}
 
-	if (kp->flags & KPARAM_KMALLOCED)
-		kfree(*(char **)kp->arg);
-
 	/* This is a hack.  We can't need to strdup in early boot, and we
 	 * don't need to; this mangled commandline is preserved. */
 	if (slab_is_available()) {
-		kp->flags |= KPARAM_KMALLOCED;
 		*(char **)kp->arg = kstrdup(val, GFP_KERNEL);
-		if (!kp->arg)
+		if (!*(char **)kp->arg)
 			return -ENOMEM;
 	} else
 		*(const char **)kp->arg = val;
@@ -304,6 +300,7 @@ static int param_array(const char *name,
 		       unsigned int min, unsigned int max,
 		       void *elem, int elemsize,
 		       int (*set)(const char *, struct kernel_param *kp),
+		       u16 flags,
 		       unsigned int *num)
 {
 	int ret;
@@ -313,6 +310,7 @@ static int param_array(const char *name,
 	/* Get the name right for errors. */
 	kp.name = name;
 	kp.arg = elem;
+	kp.flags = flags;
 
 	/* No equals sign? */
 	if (!val) {
@@ -358,7 +356,8 @@ int param_array_set(const char *val, struct kernel_param *kp)
 	unsigned int temp_num;
 
 	return param_array(kp->name, val, 1, arr->max, arr->elem,
-			   arr->elemsize, arr->set, arr->num ?: &temp_num);
+			   arr->elemsize, arr->set, kp->flags,
+			   arr->num ?: &temp_num);
 }
 
 int param_array_get(char *buffer, struct kernel_param *kp)
@@ -605,11 +604,7 @@ void module_param_sysfs_remove(struct module *mod)
 
 void destroy_params(const struct kernel_param *params, unsigned num)
 {
-	unsigned int i;
-
-	for (i = 0; i < num; i++)
-		if (params[i].flags & KPARAM_KMALLOCED)
-			kfree(*(char **)params[i].arg);
+	/* FIXME: This should free kmalloced charp parameters.  It doesn't. */
 }
 
 static void __init kernel_add_sysfs_param(const char *name,
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 0f86feb6db0c..afb7ef3dbc44 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -20,6 +20,7 @@
 #include <linux/percpu.h>
 #include <linux/ptrace.h>
 #include <linux/vmstat.h>
+#include <linux/vmalloc.h>
 #include <linux/hardirq.h>
 #include <linux/rculist.h>
 #include <linux/uaccess.h>
@@ -1030,14 +1031,10 @@ void __perf_event_sched_out(struct perf_event_context *ctx,
 	update_context_time(ctx);
 
 	perf_disable();
-	if (ctx->nr_active) {
-		list_for_each_entry(event, &ctx->group_list, group_entry) {
-			if (event != event->group_leader)
-				event_sched_out(event, cpuctx, ctx);
-			else
-				group_sched_out(event, cpuctx, ctx);
-		}
-	}
+	if (ctx->nr_active)
+		list_for_each_entry(event, &ctx->group_list, group_entry)
+			group_sched_out(event, cpuctx, ctx);
+
 	perf_enable();
  out:
 	spin_unlock(&ctx->lock);
@@ -1258,12 +1255,8 @@ __perf_event_sched_in(struct perf_event_context *ctx,
 		if (event->cpu != -1 && event->cpu != cpu)
 			continue;
 
-		if (event != event->group_leader)
-			event_sched_in(event, cpuctx, ctx, cpu);
-		else {
-			if (group_can_go_on(event, cpuctx, 1))
-				group_sched_in(event, cpuctx, ctx, cpu);
-		}
+		if (group_can_go_on(event, cpuctx, 1))
+			group_sched_in(event, cpuctx, ctx, cpu);
 
 		/*
 		 * If this pinned group hasn't been scheduled,
@@ -1291,15 +1284,9 @@ __perf_event_sched_in(struct perf_event_context *ctx,
 		if (event->cpu != -1 && event->cpu != cpu)
 			continue;
 
-		if (event != event->group_leader) {
-			if (event_sched_in(event, cpuctx, ctx, cpu))
+		if (group_can_go_on(event, cpuctx, can_add_hw))
+			if (group_sched_in(event, cpuctx, ctx, cpu))
 				can_add_hw = 0;
-		} else {
-			if (group_can_go_on(event, cpuctx, can_add_hw)) {
-				if (group_sched_in(event, cpuctx, ctx, cpu))
-					can_add_hw = 0;
-			}
-		}
 	}
 	perf_enable();
  out:
@@ -1368,7 +1355,7 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx)
 	u64 interrupts, freq;
 
 	spin_lock(&ctx->lock);
-	list_for_each_entry(event, &ctx->group_list, group_entry) {
+	list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
 		if (event->state != PERF_EVENT_STATE_ACTIVE)
 			continue;
 
@@ -2105,49 +2092,31 @@ unlock:
 	rcu_read_unlock();
 }
 
-static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+static unsigned long perf_data_size(struct perf_mmap_data *data)
 {
-	struct perf_event *event = vma->vm_file->private_data;
-	struct perf_mmap_data *data;
-	int ret = VM_FAULT_SIGBUS;
-
-	if (vmf->flags & FAULT_FLAG_MKWRITE) {
-		if (vmf->pgoff == 0)
-			ret = 0;
-		return ret;
-	}
-
-	rcu_read_lock();
-	data = rcu_dereference(event->data);
-	if (!data)
-		goto unlock;
-
-	if (vmf->pgoff == 0) {
-		vmf->page = virt_to_page(data->user_page);
-	} else {
-		int nr = vmf->pgoff - 1;
-
-		if ((unsigned)nr > data->nr_pages)
-			goto unlock;
+	return data->nr_pages << (PAGE_SHIFT + data->data_order);
+}
 
-		if (vmf->flags & FAULT_FLAG_WRITE)
-			goto unlock;
+#ifndef CONFIG_PERF_USE_VMALLOC
 
-		vmf->page = virt_to_page(data->data_pages[nr]);
-	}
+/*
+ * Back perf_mmap() with regular GFP_KERNEL-0 pages.
+ */
 
-	get_page(vmf->page);
-	vmf->page->mapping = vma->vm_file->f_mapping;
-	vmf->page->index   = vmf->pgoff;
+static struct page *
+perf_mmap_to_page(struct perf_mmap_data *data, unsigned long pgoff)
+{
+	if (pgoff > data->nr_pages)
+		return NULL;
 
-	ret = 0;
-unlock:
-	rcu_read_unlock();
+	if (pgoff == 0)
+		return virt_to_page(data->user_page);
 
-	return ret;
+	return virt_to_page(data->data_pages[pgoff - 1]);
 }
 
-static int perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
+static struct perf_mmap_data *
+perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
 {
 	struct perf_mmap_data *data;
 	unsigned long size;
@@ -2172,19 +2141,10 @@ static int perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
 			goto fail_data_pages;
 	}
 
+	data->data_order = 0;
 	data->nr_pages = nr_pages;
-	atomic_set(&data->lock, -1);
 
-	if (event->attr.watermark) {
-		data->watermark = min_t(long, PAGE_SIZE * nr_pages,
-				      event->attr.wakeup_watermark);
-	}
-	if (!data->watermark)
-		data->watermark = max(PAGE_SIZE, PAGE_SIZE * nr_pages / 4);
-
-	rcu_assign_pointer(event->data, data);
-
-	return 0;
+	return data;
 
 fail_data_pages:
 	for (i--; i >= 0; i--)
@@ -2196,7 +2156,7 @@ fail_user_page:
 	kfree(data);
 
 fail:
-	return -ENOMEM;
+	return NULL;
 }
 
 static void perf_mmap_free_page(unsigned long addr)
@@ -2207,28 +2167,169 @@ static void perf_mmap_free_page(unsigned long addr)
 	__free_page(page);
 }
 
-static void __perf_mmap_data_free(struct rcu_head *rcu_head)
+static void perf_mmap_data_free(struct perf_mmap_data *data)
 {
-	struct perf_mmap_data *data;
 	int i;
 
-	data = container_of(rcu_head, struct perf_mmap_data, rcu_head);
-
 	perf_mmap_free_page((unsigned long)data->user_page);
 	for (i = 0; i < data->nr_pages; i++)
 		perf_mmap_free_page((unsigned long)data->data_pages[i]);
+}
+
+#else
+
+/*
+ * Back perf_mmap() with vmalloc memory.
+ *
+ * Required for architectures that have d-cache aliasing issues.
+ */
+
+static struct page *
+perf_mmap_to_page(struct perf_mmap_data *data, unsigned long pgoff)
+{
+	if (pgoff > (1UL << data->data_order))
+		return NULL;
+
+	return vmalloc_to_page((void *)data->user_page + pgoff * PAGE_SIZE);
+}
+
+static void perf_mmap_unmark_page(void *addr)
+{
+	struct page *page = vmalloc_to_page(addr);
+
+	page->mapping = NULL;
+}
+
+static void perf_mmap_data_free_work(struct work_struct *work)
+{
+	struct perf_mmap_data *data;
+	void *base;
+	int i, nr;
+
+	data = container_of(work, struct perf_mmap_data, work);
+	nr = 1 << data->data_order;
+
+	base = data->user_page;
+	for (i = 0; i < nr + 1; i++)
+		perf_mmap_unmark_page(base + (i * PAGE_SIZE));
+
+	vfree(base);
+}
+
+static void perf_mmap_data_free(struct perf_mmap_data *data)
+{
+	schedule_work(&data->work);
+}
 
+static struct perf_mmap_data *
+perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
+{
+	struct perf_mmap_data *data;
+	unsigned long size;
+	void *all_buf;
+
+	WARN_ON(atomic_read(&event->mmap_count));
+
+	size = sizeof(struct perf_mmap_data);
+	size += sizeof(void *);
+
+	data = kzalloc(size, GFP_KERNEL);
+	if (!data)
+		goto fail;
+
+	INIT_WORK(&data->work, perf_mmap_data_free_work);
+
+	all_buf = vmalloc_user((nr_pages + 1) * PAGE_SIZE);
+	if (!all_buf)
+		goto fail_all_buf;
+
+	data->user_page = all_buf;
+	data->data_pages[0] = all_buf + PAGE_SIZE;
+	data->data_order = ilog2(nr_pages);
+	data->nr_pages = 1;
+
+	return data;
+
+fail_all_buf:
 	kfree(data);
+
+fail:
+	return NULL;
 }
 
-static void perf_mmap_data_free(struct perf_event *event)
+#endif
+
+static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct perf_event *event = vma->vm_file->private_data;
+	struct perf_mmap_data *data;
+	int ret = VM_FAULT_SIGBUS;
+
+	if (vmf->flags & FAULT_FLAG_MKWRITE) {
+		if (vmf->pgoff == 0)
+			ret = 0;
+		return ret;
+	}
+
+	rcu_read_lock();
+	data = rcu_dereference(event->data);
+	if (!data)
+		goto unlock;
+
+	if (vmf->pgoff && (vmf->flags & FAULT_FLAG_WRITE))
+		goto unlock;
+
+	vmf->page = perf_mmap_to_page(data, vmf->pgoff);
+	if (!vmf->page)
+		goto unlock;
+
+	get_page(vmf->page);
+	vmf->page->mapping = vma->vm_file->f_mapping;
+	vmf->page->index   = vmf->pgoff;
+
+	ret = 0;
+unlock:
+	rcu_read_unlock();
+
+	return ret;
+}
+
+static void
+perf_mmap_data_init(struct perf_event *event, struct perf_mmap_data *data)
+{
+	long max_size = perf_data_size(data);
+
+	atomic_set(&data->lock, -1);
+
+	if (event->attr.watermark) {
+		data->watermark = min_t(long, max_size,
+					event->attr.wakeup_watermark);
+	}
+
+	if (!data->watermark)
+		data->watermark = max_t(long, PAGE_SIZE, max_size / 2);
+
+
+	rcu_assign_pointer(event->data, data);
+}
+
+static void perf_mmap_data_free_rcu(struct rcu_head *rcu_head)
+{
+	struct perf_mmap_data *data;
+
+	data = container_of(rcu_head, struct perf_mmap_data, rcu_head);
+	perf_mmap_data_free(data);
+	kfree(data);
+}
+
+static void perf_mmap_data_release(struct perf_event *event)
 {
 	struct perf_mmap_data *data = event->data;
 
 	WARN_ON(atomic_read(&event->mmap_count));
 
 	rcu_assign_pointer(event->data, NULL);
-	call_rcu(&data->rcu_head, __perf_mmap_data_free);
+	call_rcu(&data->rcu_head, perf_mmap_data_free_rcu);
 }
 
 static void perf_mmap_open(struct vm_area_struct *vma)
@@ -2244,11 +2345,12 @@ static void perf_mmap_close(struct vm_area_struct *vma)
 
 	WARN_ON_ONCE(event->ctx->parent_ctx);
 	if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) {
+		unsigned long size = perf_data_size(event->data);
 		struct user_struct *user = current_user();
 
-		atomic_long_sub(event->data->nr_pages + 1, &user->locked_vm);
+		atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm);
 		vma->vm_mm->locked_vm -= event->data->nr_locked;
-		perf_mmap_data_free(event);
+		perf_mmap_data_release(event);
 		mutex_unlock(&event->mmap_mutex);
 	}
 }
@@ -2266,6 +2368,7 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 	unsigned long user_locked, user_lock_limit;
 	struct user_struct *user = current_user();
 	unsigned long locked, lock_limit;
+	struct perf_mmap_data *data;
 	unsigned long vma_size;
 	unsigned long nr_pages;
 	long user_extra, extra;
@@ -2328,10 +2431,15 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 	}
 
 	WARN_ON(event->data);
-	ret = perf_mmap_data_alloc(event, nr_pages);
-	if (ret)
+
+	data = perf_mmap_data_alloc(event, nr_pages);
+	ret = -ENOMEM;
+	if (!data)
 		goto unlock;
 
+	ret = 0;
+	perf_mmap_data_init(event, data);
+
 	atomic_set(&event->mmap_count, 1);
 	atomic_long_add(user_extra, &user->locked_vm);
 	vma->vm_mm->locked_vm += extra;
@@ -2519,7 +2627,7 @@ static bool perf_output_space(struct perf_mmap_data *data, unsigned long tail,
 	if (!data->writable)
 		return true;
 
-	mask = (data->nr_pages << PAGE_SHIFT) - 1;
+	mask = perf_data_size(data) - 1;
 
 	offset = (offset - tail) & mask;
 	head   = (head   - tail) & mask;
@@ -2624,7 +2732,7 @@ void perf_output_copy(struct perf_output_handle *handle,
 		      const void *buf, unsigned int len)
 {
 	unsigned int pages_mask;
-	unsigned int offset;
+	unsigned long offset;
 	unsigned int size;
 	void **pages;
 
@@ -2633,12 +2741,14 @@ void perf_output_copy(struct perf_output_handle *handle,
 	pages		= handle->data->data_pages;
 
 	do {
-		unsigned int page_offset;
+		unsigned long page_offset;
+		unsigned long page_size;
 		int nr;
 
 		nr	    = (offset >> PAGE_SHIFT) & pages_mask;
-		page_offset = offset & (PAGE_SIZE - 1);
-		size	    = min_t(unsigned int, PAGE_SIZE - page_offset, len);
+		page_size   = 1UL << (handle->data->data_order + PAGE_SHIFT);
+		page_offset = offset & (page_size - 1);
+		size	    = min_t(unsigned int, page_size - page_offset, len);
 
 		memcpy(pages[nr] + page_offset, buf, size);
 
@@ -4781,9 +4891,7 @@ int perf_event_init_task(struct task_struct *child)
 	 * We dont have to disable NMIs - we are only looking at
 	 * the list, not manipulating it:
 	 */
-	list_for_each_entry_rcu(event, &parent_ctx->event_list, event_entry) {
-		if (event != event->group_leader)
-			continue;
+	list_for_each_entry(event, &parent_ctx->group_list, group_entry) {
 
 		if (!event->attr.inherit) {
 			inherited_all = 0;
diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c
index 17d8bb1acf9c..25596e450ac7 100644
--- a/kernel/power/suspend_test.c
+++ b/kernel/power/suspend_test.c
@@ -19,7 +19,7 @@
  * The time it takes is system-specific though, so when we test this
  * during system bootup we allow a LOT of time.
  */
-#define TEST_SUSPEND_SECONDS	5
+#define TEST_SUSPEND_SECONDS	10
 
 static unsigned long suspend_test_start_time;
 
@@ -49,7 +49,8 @@ void suspend_test_finish(const char *label)
 	 * has some performance issues.  The stack dump of a WARN_ON
 	 * is more likely to get the right attention than a printk...
 	 */
-	WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
+	WARN(msec > (TEST_SUSPEND_SECONDS * 1000),
+	     "Component: %s, time: %u\n", label, msec);
 }
 
 /*
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 37ac45483082..400183346ad2 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -46,22 +46,15 @@
 #include <linux/module.h>
 #include <linux/kernel_stat.h>
 
-enum rcu_barrier {
-	RCU_BARRIER_STD,
-	RCU_BARRIER_BH,
-	RCU_BARRIER_SCHED,
-};
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key rcu_lock_key;
+struct lockdep_map rcu_lock_map =
+	STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key);
+EXPORT_SYMBOL_GPL(rcu_lock_map);
+#endif
 
-static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL};
-static atomic_t rcu_barrier_cpu_count;
-static DEFINE_MUTEX(rcu_barrier_mutex);
-static struct completion rcu_barrier_completion;
 int rcu_scheduler_active __read_mostly;
 
-static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
-static struct rcu_head rcu_migrate_head[3];
-static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
-
 /*
  * Awaken the corresponding synchronize_rcu() instance now that a
  * grace period has elapsed.
@@ -164,129 +157,10 @@ void synchronize_rcu_bh(void)
 }
 EXPORT_SYMBOL_GPL(synchronize_rcu_bh);
 
-static void rcu_barrier_callback(struct rcu_head *notused)
-{
-	if (atomic_dec_and_test(&rcu_barrier_cpu_count))
-		complete(&rcu_barrier_completion);
-}
-
-/*
- * Called with preemption disabled, and from cross-cpu IRQ context.
- */
-static void rcu_barrier_func(void *type)
-{
-	int cpu = smp_processor_id();
-	struct rcu_head *head = &per_cpu(rcu_barrier_head, cpu);
-
-	atomic_inc(&rcu_barrier_cpu_count);
-	switch ((enum rcu_barrier)type) {
-	case RCU_BARRIER_STD:
-		call_rcu(head, rcu_barrier_callback);
-		break;
-	case RCU_BARRIER_BH:
-		call_rcu_bh(head, rcu_barrier_callback);
-		break;
-	case RCU_BARRIER_SCHED:
-		call_rcu_sched(head, rcu_barrier_callback);
-		break;
-	}
-}
-
-static inline void wait_migrated_callbacks(void)
-{
-	wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
-	smp_mb(); /* In case we didn't sleep. */
-}
-
-/*
- * Orchestrate the specified type of RCU barrier, waiting for all
- * RCU callbacks of the specified type to complete.
- */
-static void _rcu_barrier(enum rcu_barrier type)
-{
-	BUG_ON(in_interrupt());
-	/* Take cpucontrol mutex to protect against CPU hotplug */
-	mutex_lock(&rcu_barrier_mutex);
-	init_completion(&rcu_barrier_completion);
-	/*
-	 * Initialize rcu_barrier_cpu_count to 1, then invoke
-	 * rcu_barrier_func() on each CPU, so that each CPU also has
-	 * incremented rcu_barrier_cpu_count.  Only then is it safe to
-	 * decrement rcu_barrier_cpu_count -- otherwise the first CPU
-	 * might complete its grace period before all of the other CPUs
-	 * did their increment, causing this function to return too
-	 * early.
-	 */
-	atomic_set(&rcu_barrier_cpu_count, 1);
-	on_each_cpu(rcu_barrier_func, (void *)type, 1);
-	if (atomic_dec_and_test(&rcu_barrier_cpu_count))
-		complete(&rcu_barrier_completion);
-	wait_for_completion(&rcu_barrier_completion);
-	mutex_unlock(&rcu_barrier_mutex);
-	wait_migrated_callbacks();
-}
-
-/**
- * rcu_barrier - Wait until all in-flight call_rcu() callbacks complete.
- */
-void rcu_barrier(void)
-{
-	_rcu_barrier(RCU_BARRIER_STD);
-}
-EXPORT_SYMBOL_GPL(rcu_barrier);
-
-/**
- * rcu_barrier_bh - Wait until all in-flight call_rcu_bh() callbacks complete.
- */
-void rcu_barrier_bh(void)
-{
-	_rcu_barrier(RCU_BARRIER_BH);
-}
-EXPORT_SYMBOL_GPL(rcu_barrier_bh);
-
-/**
- * rcu_barrier_sched - Wait for in-flight call_rcu_sched() callbacks.
- */
-void rcu_barrier_sched(void)
-{
-	_rcu_barrier(RCU_BARRIER_SCHED);
-}
-EXPORT_SYMBOL_GPL(rcu_barrier_sched);
-
-static void rcu_migrate_callback(struct rcu_head *notused)
-{
-	if (atomic_dec_and_test(&rcu_migrate_type_count))
-		wake_up(&rcu_migrate_wq);
-}
-
-extern int rcu_cpu_notify(struct notifier_block *self,
-			  unsigned long action, void *hcpu);
-
 static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 		unsigned long action, void *hcpu)
 {
-	rcu_cpu_notify(self, action, hcpu);
-	if (action == CPU_DYING) {
-		/*
-		 * preempt_disable() in on_each_cpu() prevents stop_machine(),
-		 * so when "on_each_cpu(rcu_barrier_func, (void *)type, 1);"
-		 * returns, all online cpus have queued rcu_barrier_func(),
-		 * and the dead cpu(if it exist) queues rcu_migrate_callback()s.
-		 *
-		 * These callbacks ensure _rcu_barrier() waits for all
-		 * RCU callbacks of the specified type to complete.
-		 */
-		atomic_set(&rcu_migrate_type_count, 3);
-		call_rcu_bh(rcu_migrate_head, rcu_migrate_callback);
-		call_rcu_sched(rcu_migrate_head + 1, rcu_migrate_callback);
-		call_rcu(rcu_migrate_head + 2, rcu_migrate_callback);
-	} else if (action == CPU_DOWN_PREPARE) {
-		/* Don't need to wait until next removal operation. */
-		/* rcu_migrate_head is protected by cpu_add_remove_lock */
-		wait_migrated_callbacks();
-	}
-
-	return NOTIFY_OK;
+	return rcu_cpu_notify(self, action, hcpu);
 }
 
 void __init rcu_init(void)
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 233768f21f97..697c0a0229d4 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -606,8 +606,6 @@ static struct rcu_torture_ops sched_ops_sync = {
 	.name		= "sched_sync"
 };
 
-extern int rcu_expedited_torture_stats(char *page);
-
 static struct rcu_torture_ops sched_expedited_ops = {
 	.init		= rcu_sync_torture_init,
 	.cleanup	= NULL,
@@ -650,7 +648,7 @@ rcu_torture_writer(void *arg)
 		old_rp = rcu_torture_current;
 		rp->rtort_mbtest = 1;
 		rcu_assign_pointer(rcu_torture_current, rp);
-		smp_wmb();
+		smp_wmb(); /* Mods to old_rp must follow rcu_assign_pointer() */
 		if (old_rp) {
 			i = old_rp->rtort_pipe_count;
 			if (i > RCU_TORTURE_PIPE_LEN)
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 52b06f6e158c..0536125b0497 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -49,13 +49,6 @@
 
 #include "rcutree.h"
 
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-static struct lock_class_key rcu_lock_key;
-struct lockdep_map rcu_lock_map =
-	STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key);
-EXPORT_SYMBOL_GPL(rcu_lock_map);
-#endif
-
 /* Data structures. */
 
 #define RCU_STATE_INITIALIZER(name) { \
@@ -70,6 +63,9 @@ EXPORT_SYMBOL_GPL(rcu_lock_map);
 	.gpnum = -300, \
 	.completed = -300, \
 	.onofflock = __SPIN_LOCK_UNLOCKED(&name.onofflock), \
+	.orphan_cbs_list = NULL, \
+	.orphan_cbs_tail = &name.orphan_cbs_list, \
+	.orphan_qlen = 0, \
 	.fqslock = __SPIN_LOCK_UNLOCKED(&name.fqslock), \
 	.n_force_qs = 0, \
 	.n_force_qs_ngp = 0, \
@@ -81,24 +77,16 @@ DEFINE_PER_CPU(struct rcu_data, rcu_sched_data);
 struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh_state);
 DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
 
-extern long rcu_batches_completed_sched(void);
-static struct rcu_node *rcu_get_root(struct rcu_state *rsp);
-static void cpu_quiet_msk(unsigned long mask, struct rcu_state *rsp,
-			  struct rcu_node *rnp, unsigned long flags);
-static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags);
-#ifdef CONFIG_HOTPLUG_CPU
-static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp);
-#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-static void __rcu_process_callbacks(struct rcu_state *rsp,
-				    struct rcu_data *rdp);
-static void __call_rcu(struct rcu_head *head,
-		       void (*func)(struct rcu_head *rcu),
-		       struct rcu_state *rsp);
-static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp);
-static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_state *rsp,
-					   int preemptable);
 
-#include "rcutree_plugin.h"
+/*
+ * Return true if an RCU grace period is in progress.  The ACCESS_ONCE()s
+ * permit this function to be invoked without holding the root rcu_node
+ * structure's ->lock, but of course results can be subject to change.
+ */
+static int rcu_gp_in_progress(struct rcu_state *rsp)
+{
+	return ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum);
+}
 
 /*
  * Note a quiescent state.  Because we do not need to know
@@ -137,6 +125,10 @@ static int blimit = 10;		/* Maximum callbacks per softirq. */
 static int qhimark = 10000;	/* If this many pending, ignore blimit. */
 static int qlowmark = 100;	/* Once only this many pending, use blimit. */
 
+module_param(blimit, int, 0);
+module_param(qhimark, int, 0);
+module_param(qlowmark, int, 0);
+
 static void force_quiescent_state(struct rcu_state *rsp, int relaxed);
 static int rcu_pending(int cpu);
 
@@ -173,9 +165,7 @@ cpu_has_callbacks_ready_to_invoke(struct rcu_data *rdp)
 static int
 cpu_needs_another_gp(struct rcu_state *rsp, struct rcu_data *rdp)
 {
-	/* ACCESS_ONCE() because we are accessing outside of lock. */
-	return *rdp->nxttail[RCU_DONE_TAIL] &&
-	       ACCESS_ONCE(rsp->completed) == ACCESS_ONCE(rsp->gpnum);
+	return *rdp->nxttail[RCU_DONE_TAIL] && !rcu_gp_in_progress(rsp);
 }
 
 /*
@@ -369,7 +359,7 @@ static long dyntick_recall_completed(struct rcu_state *rsp)
 /*
  * Snapshot the specified CPU's dynticks counter so that we can later
  * credit them with an implicit quiescent state.  Return 1 if this CPU
- * is already in a quiescent state courtesy of dynticks idle mode.
+ * is in dynticks idle mode, which is an extended quiescent state.
  */
 static int dyntick_save_progress_counter(struct rcu_data *rdp)
 {
@@ -475,30 +465,34 @@ static void print_other_cpu_stall(struct rcu_state *rsp)
 	long delta;
 	unsigned long flags;
 	struct rcu_node *rnp = rcu_get_root(rsp);
-	struct rcu_node *rnp_cur = rsp->level[NUM_RCU_LVLS - 1];
-	struct rcu_node *rnp_end = &rsp->node[NUM_RCU_NODES];
 
 	/* Only let one CPU complain about others per time interval. */
 
 	spin_lock_irqsave(&rnp->lock, flags);
 	delta = jiffies - rsp->jiffies_stall;
-	if (delta < RCU_STALL_RAT_DELAY || rsp->gpnum == rsp->completed) {
+	if (delta < RCU_STALL_RAT_DELAY || !rcu_gp_in_progress(rsp)) {
 		spin_unlock_irqrestore(&rnp->lock, flags);
 		return;
 	}
 	rsp->jiffies_stall = jiffies + RCU_SECONDS_TILL_STALL_RECHECK;
+
+	/*
+	 * Now rat on any tasks that got kicked up to the root rcu_node
+	 * due to CPU offlining.
+	 */
+	rcu_print_task_stall(rnp);
 	spin_unlock_irqrestore(&rnp->lock, flags);
 
 	/* OK, time to rat on our buddy... */
 
 	printk(KERN_ERR "INFO: RCU detected CPU stalls:");
-	for (; rnp_cur < rnp_end; rnp_cur++) {
+	rcu_for_each_leaf_node(rsp, rnp) {
 		rcu_print_task_stall(rnp);
-		if (rnp_cur->qsmask == 0)
+		if (rnp->qsmask == 0)
 			continue;
-		for (cpu = 0; cpu <= rnp_cur->grphi - rnp_cur->grplo; cpu++)
-			if (rnp_cur->qsmask & (1UL << cpu))
-				printk(" %d", rnp_cur->grplo + cpu);
+		for (cpu = 0; cpu <= rnp->grphi - rnp->grplo; cpu++)
+			if (rnp->qsmask & (1UL << cpu))
+				printk(" %d", rnp->grplo + cpu);
 	}
 	printk(" (detected by %d, t=%ld jiffies)\n",
 	       smp_processor_id(), (long)(jiffies - rsp->gp_start));
@@ -537,8 +531,7 @@ static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp)
 		/* We haven't checked in, so go dump stack. */
 		print_cpu_stall(rsp);
 
-	} else if (rsp->gpnum != rsp->completed &&
-		   delta >= RCU_STALL_RAT_DELAY) {
+	} else if (rcu_gp_in_progress(rsp) && delta >= RCU_STALL_RAT_DELAY) {
 
 		/* They had two time units to dump stack, so complain. */
 		print_other_cpu_stall(rsp);
@@ -617,9 +610,15 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags)
 	note_new_gpnum(rsp, rdp);
 
 	/*
-	 * Because we are first, we know that all our callbacks will
-	 * be covered by this upcoming grace period, even the ones
-	 * that were registered arbitrarily recently.
+	 * Because this CPU just now started the new grace period, we know
+	 * that all of its callbacks will be covered by this upcoming grace
+	 * period, even the ones that were registered arbitrarily recently.
+	 * Therefore, advance all outstanding callbacks to RCU_WAIT_TAIL.
+	 *
+	 * Other CPUs cannot be sure exactly when the grace period started.
+	 * Therefore, their recently registered callbacks must pass through
+	 * an additional RCU_NEXT_READY stage, so that they will be handled
+	 * by the next RCU grace period.
 	 */
 	rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
 	rdp->nxttail[RCU_WAIT_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
@@ -657,7 +656,7 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags)
 	 * one corresponding to this CPU, due to the fact that we have
 	 * irqs disabled.
 	 */
-	for (rnp = &rsp->node[0]; rnp < &rsp->node[NUM_RCU_NODES]; rnp++) {
+	rcu_for_each_node_breadth_first(rsp, rnp) {
 		spin_lock(&rnp->lock);	/* irqs already disabled. */
 		rcu_preempt_check_blocked_tasks(rnp);
 		rnp->qsmask = rnp->qsmaskinit;
@@ -703,9 +702,9 @@ rcu_process_gp_end(struct rcu_state *rsp, struct rcu_data *rdp)
  * hold rnp->lock, as required by rcu_start_gp(), which will release it.
  */
 static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags)
-	__releases(rnp->lock)
+	__releases(rcu_get_root(rsp)->lock)
 {
-	WARN_ON_ONCE(rsp->completed == rsp->gpnum);
+	WARN_ON_ONCE(!rcu_gp_in_progress(rsp));
 	rsp->completed = rsp->gpnum;
 	rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]);
 	rcu_start_gp(rsp, flags);  /* releases root node's rnp->lock. */
@@ -842,17 +841,63 @@ rcu_check_quiescent_state(struct rcu_state *rsp, struct rcu_data *rdp)
 #ifdef CONFIG_HOTPLUG_CPU
 
 /*
+ * Move a dying CPU's RCU callbacks to the ->orphan_cbs_list for the
+ * specified flavor of RCU.  The callbacks will be adopted by the next
+ * _rcu_barrier() invocation or by the CPU_DEAD notifier, whichever
+ * comes first.  Because this is invoked from the CPU_DYING notifier,
+ * irqs are already disabled.
+ */
+static void rcu_send_cbs_to_orphanage(struct rcu_state *rsp)
+{
+	int i;
+	struct rcu_data *rdp = rsp->rda[smp_processor_id()];
+
+	if (rdp->nxtlist == NULL)
+		return;  /* irqs disabled, so comparison is stable. */
+	spin_lock(&rsp->onofflock);  /* irqs already disabled. */
+	*rsp->orphan_cbs_tail = rdp->nxtlist;
+	rsp->orphan_cbs_tail = rdp->nxttail[RCU_NEXT_TAIL];
+	rdp->nxtlist = NULL;
+	for (i = 0; i < RCU_NEXT_SIZE; i++)
+		rdp->nxttail[i] = &rdp->nxtlist;
+	rsp->orphan_qlen += rdp->qlen;
+	rdp->qlen = 0;
+	spin_unlock(&rsp->onofflock);  /* irqs remain disabled. */
+}
+
+/*
+ * Adopt previously orphaned RCU callbacks.
+ */
+static void rcu_adopt_orphan_cbs(struct rcu_state *rsp)
+{
+	unsigned long flags;
+	struct rcu_data *rdp;
+
+	spin_lock_irqsave(&rsp->onofflock, flags);
+	rdp = rsp->rda[smp_processor_id()];
+	if (rsp->orphan_cbs_list == NULL) {
+		spin_unlock_irqrestore(&rsp->onofflock, flags);
+		return;
+	}
+	*rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_cbs_list;
+	rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_cbs_tail;
+	rdp->qlen += rsp->orphan_qlen;
+	rsp->orphan_cbs_list = NULL;
+	rsp->orphan_cbs_tail = &rsp->orphan_cbs_list;
+	rsp->orphan_qlen = 0;
+	spin_unlock_irqrestore(&rsp->onofflock, flags);
+}
+
+/*
  * Remove the outgoing CPU from the bitmasks in the rcu_node hierarchy
  * and move all callbacks from the outgoing CPU to the current one.
  */
 static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
 {
-	int i;
 	unsigned long flags;
 	long lastcomp;
 	unsigned long mask;
 	struct rcu_data *rdp = rsp->rda[cpu];
-	struct rcu_data *rdp_me;
 	struct rcu_node *rnp;
 
 	/* Exclude any attempts to start a new grace period. */
@@ -868,39 +913,29 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
 			spin_unlock(&rnp->lock); /* irqs remain disabled. */
 			break;
 		}
-		rcu_preempt_offline_tasks(rsp, rnp, rdp);
+
+		/*
+		 * If there was a task blocking the current grace period,
+		 * and if all CPUs have checked in, we need to propagate
+		 * the quiescent state up the rcu_node hierarchy.  But that
+		 * is inconvenient at the moment due to deadlock issues if
+		 * this should end the current grace period.  So set the
+		 * offlined CPU's bit in ->qsmask in order to force the
+		 * next force_quiescent_state() invocation to clean up this
+		 * mess in a deadlock-free manner.
+		 */
+		if (rcu_preempt_offline_tasks(rsp, rnp, rdp) && !rnp->qsmask)
+			rnp->qsmask |= mask;
+
 		mask = rnp->grpmask;
 		spin_unlock(&rnp->lock);	/* irqs remain disabled. */
 		rnp = rnp->parent;
 	} while (rnp != NULL);
 	lastcomp = rsp->completed;
 
-	spin_unlock(&rsp->onofflock);		/* irqs remain disabled. */
+	spin_unlock_irqrestore(&rsp->onofflock, flags);
 
-	/*
-	 * Move callbacks from the outgoing CPU to the running CPU.
-	 * Note that the outgoing CPU is now quiscent, so it is now
-	 * (uncharacteristically) safe to access its rcu_data structure.
-	 * Note also that we must carefully retain the order of the
-	 * outgoing CPU's callbacks in order for rcu_barrier() to work
-	 * correctly.  Finally, note that we start all the callbacks
-	 * afresh, even those that have passed through a grace period
-	 * and are therefore ready to invoke.  The theory is that hotplug
-	 * events are rare, and that if they are frequent enough to
-	 * indefinitely delay callbacks, you have far worse things to
-	 * be worrying about.
-	 */
-	rdp_me = rsp->rda[smp_processor_id()];
-	if (rdp->nxtlist != NULL) {
-		*rdp_me->nxttail[RCU_NEXT_TAIL] = rdp->nxtlist;
-		rdp_me->nxttail[RCU_NEXT_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
-		rdp->nxtlist = NULL;
-		for (i = 0; i < RCU_NEXT_SIZE; i++)
-			rdp->nxttail[i] = &rdp->nxtlist;
-		rdp_me->qlen += rdp->qlen;
-		rdp->qlen = 0;
-	}
-	local_irq_restore(flags);
+	rcu_adopt_orphan_cbs(rsp);
 }
 
 /*
@@ -918,6 +953,14 @@ static void rcu_offline_cpu(int cpu)
 
 #else /* #ifdef CONFIG_HOTPLUG_CPU */
 
+static void rcu_send_cbs_to_orphanage(struct rcu_state *rsp)
+{
+}
+
+static void rcu_adopt_orphan_cbs(struct rcu_state *rsp)
+{
+}
+
 static void rcu_offline_cpu(int cpu)
 {
 }
@@ -928,7 +971,7 @@ static void rcu_offline_cpu(int cpu)
  * Invoke any RCU callbacks that have made it to the end of their grace
  * period.  Thottle as specified by rdp->blimit.
  */
-static void rcu_do_batch(struct rcu_data *rdp)
+static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
 {
 	unsigned long flags;
 	struct rcu_head *next, *list, **tail;
@@ -981,6 +1024,13 @@ static void rcu_do_batch(struct rcu_data *rdp)
 	if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark)
 		rdp->blimit = blimit;
 
+	/* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */
+	if (rdp->qlen == 0 && rdp->qlen_last_fqs_check != 0) {
+		rdp->qlen_last_fqs_check = 0;
+		rdp->n_force_qs_snap = rsp->n_force_qs;
+	} else if (rdp->qlen < rdp->qlen_last_fqs_check - qhimark)
+		rdp->qlen_last_fqs_check = rdp->qlen;
+
 	local_irq_restore(flags);
 
 	/* Re-raise the RCU softirq if there are callbacks remaining. */
@@ -1050,33 +1100,32 @@ static int rcu_process_dyntick(struct rcu_state *rsp, long lastcomp,
 	int cpu;
 	unsigned long flags;
 	unsigned long mask;
-	struct rcu_node *rnp_cur = rsp->level[NUM_RCU_LVLS - 1];
-	struct rcu_node *rnp_end = &rsp->node[NUM_RCU_NODES];
+	struct rcu_node *rnp;
 
-	for (; rnp_cur < rnp_end; rnp_cur++) {
+	rcu_for_each_leaf_node(rsp, rnp) {
 		mask = 0;
-		spin_lock_irqsave(&rnp_cur->lock, flags);
+		spin_lock_irqsave(&rnp->lock, flags);
 		if (rsp->completed != lastcomp) {
-			spin_unlock_irqrestore(&rnp_cur->lock, flags);
+			spin_unlock_irqrestore(&rnp->lock, flags);
 			return 1;
 		}
-		if (rnp_cur->qsmask == 0) {
-			spin_unlock_irqrestore(&rnp_cur->lock, flags);
+		if (rnp->qsmask == 0) {
+			spin_unlock_irqrestore(&rnp->lock, flags);
 			continue;
 		}
-		cpu = rnp_cur->grplo;
+		cpu = rnp->grplo;
 		bit = 1;
-		for (; cpu <= rnp_cur->grphi; cpu++, bit <<= 1) {
-			if ((rnp_cur->qsmask & bit) != 0 && f(rsp->rda[cpu]))
+		for (; cpu <= rnp->grphi; cpu++, bit <<= 1) {
+			if ((rnp->qsmask & bit) != 0 && f(rsp->rda[cpu]))
 				mask |= bit;
 		}
 		if (mask != 0 && rsp->completed == lastcomp) {
 
-			/* cpu_quiet_msk() releases rnp_cur->lock. */
-			cpu_quiet_msk(mask, rsp, rnp_cur, flags);
+			/* cpu_quiet_msk() releases rnp->lock. */
+			cpu_quiet_msk(mask, rsp, rnp, flags);
 			continue;
 		}
-		spin_unlock_irqrestore(&rnp_cur->lock, flags);
+		spin_unlock_irqrestore(&rnp->lock, flags);
 	}
 	return 0;
 }
@@ -1092,7 +1141,7 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed)
 	struct rcu_node *rnp = rcu_get_root(rsp);
 	u8 signaled;
 
-	if (ACCESS_ONCE(rsp->completed) == ACCESS_ONCE(rsp->gpnum))
+	if (!rcu_gp_in_progress(rsp))
 		return;  /* No grace period in progress, nothing to force. */
 	if (!spin_trylock_irqsave(&rsp->fqslock, flags)) {
 		rsp->n_force_qs_lh++; /* Inexact, can lose counts.  Tough! */
@@ -1195,7 +1244,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 	}
 
 	/* If there are callbacks ready, invoke them. */
-	rcu_do_batch(rdp);
+	rcu_do_batch(rsp, rdp);
 }
 
 /*
@@ -1251,7 +1300,7 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	rdp->nxttail[RCU_NEXT_TAIL] = &head->next;
 
 	/* Start a new grace period if one not already started. */
-	if (ACCESS_ONCE(rsp->completed) == ACCESS_ONCE(rsp->gpnum)) {
+	if (!rcu_gp_in_progress(rsp)) {
 		unsigned long nestflag;
 		struct rcu_node *rnp_root = rcu_get_root(rsp);
 
@@ -1259,10 +1308,20 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 		rcu_start_gp(rsp, nestflag);  /* releases rnp_root->lock. */
 	}
 
-	/* Force the grace period if too many callbacks or too long waiting. */
-	if (unlikely(++rdp->qlen > qhimark)) {
+	/*
+	 * Force the grace period if too many callbacks or too long waiting.
+	 * Enforce hysteresis, and don't invoke force_quiescent_state()
+	 * if some other CPU has recently done so.  Also, don't bother
+	 * invoking force_quiescent_state() if the newly enqueued callback
+	 * is the only one waiting for a grace period to complete.
+	 */
+	if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
 		rdp->blimit = LONG_MAX;
-		force_quiescent_state(rsp, 0);
+		if (rsp->n_force_qs == rdp->n_force_qs_snap &&
+		    *rdp->nxttail[RCU_DONE_TAIL] != head)
+			force_quiescent_state(rsp, 0);
+		rdp->n_force_qs_snap = rsp->n_force_qs;
+		rdp->qlen_last_fqs_check = rdp->qlen;
 	} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
 		force_quiescent_state(rsp, 1);
 	local_irq_restore(flags);
@@ -1331,7 +1390,7 @@ static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp)
 	}
 
 	/* Has an RCU GP gone long enough to send resched IPIs &c? */
-	if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) &&
+	if (rcu_gp_in_progress(rsp) &&
 	    ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)) {
 		rdp->n_rp_need_fqs++;
 		return 1;
@@ -1368,6 +1427,82 @@ int rcu_needs_cpu(int cpu)
 	       rcu_preempt_needs_cpu(cpu);
 }
 
+static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL};
+static atomic_t rcu_barrier_cpu_count;
+static DEFINE_MUTEX(rcu_barrier_mutex);
+static struct completion rcu_barrier_completion;
+
+static void rcu_barrier_callback(struct rcu_head *notused)
+{
+	if (atomic_dec_and_test(&rcu_barrier_cpu_count))
+		complete(&rcu_barrier_completion);
+}
+
+/*
+ * Called with preemption disabled, and from cross-cpu IRQ context.
+ */
+static void rcu_barrier_func(void *type)
+{
+	int cpu = smp_processor_id();
+	struct rcu_head *head = &per_cpu(rcu_barrier_head, cpu);
+	void (*call_rcu_func)(struct rcu_head *head,
+			      void (*func)(struct rcu_head *head));
+
+	atomic_inc(&rcu_barrier_cpu_count);
+	call_rcu_func = type;
+	call_rcu_func(head, rcu_barrier_callback);
+}
+
+/*
+ * Orchestrate the specified type of RCU barrier, waiting for all
+ * RCU callbacks of the specified type to complete.
+ */
+static void _rcu_barrier(struct rcu_state *rsp,
+			 void (*call_rcu_func)(struct rcu_head *head,
+					       void (*func)(struct rcu_head *head)))
+{
+	BUG_ON(in_interrupt());
+	/* Take mutex to serialize concurrent rcu_barrier() requests. */
+	mutex_lock(&rcu_barrier_mutex);
+	init_completion(&rcu_barrier_completion);
+	/*
+	 * Initialize rcu_barrier_cpu_count to 1, then invoke
+	 * rcu_barrier_func() on each CPU, so that each CPU also has
+	 * incremented rcu_barrier_cpu_count.  Only then is it safe to
+	 * decrement rcu_barrier_cpu_count -- otherwise the first CPU
+	 * might complete its grace period before all of the other CPUs
+	 * did their increment, causing this function to return too
+	 * early.
+	 */
+	atomic_set(&rcu_barrier_cpu_count, 1);
+	preempt_disable(); /* stop CPU_DYING from filling orphan_cbs_list */
+	rcu_adopt_orphan_cbs(rsp);
+	on_each_cpu(rcu_barrier_func, (void *)call_rcu_func, 1);
+	preempt_enable(); /* CPU_DYING can again fill orphan_cbs_list */
+	if (atomic_dec_and_test(&rcu_barrier_cpu_count))
+		complete(&rcu_barrier_completion);
+	wait_for_completion(&rcu_barrier_completion);
+	mutex_unlock(&rcu_barrier_mutex);
+}
+
+/**
+ * rcu_barrier_bh - Wait until all in-flight call_rcu_bh() callbacks complete.
+ */
+void rcu_barrier_bh(void)
+{
+	_rcu_barrier(&rcu_bh_state, call_rcu_bh);
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_bh);
+
+/**
+ * rcu_barrier_sched - Wait for in-flight call_rcu_sched() callbacks.
+ */
+void rcu_barrier_sched(void)
+{
+	_rcu_barrier(&rcu_sched_state, call_rcu_sched);
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_sched);
+
 /*
  * Do boot-time initialization of a CPU's per-CPU RCU data.
  */
@@ -1418,6 +1553,8 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable)
 	rdp->beenonline = 1;	 /* We have now been online. */
 	rdp->preemptable = preemptable;
 	rdp->passed_quiesc_completed = lastcomp - 1;
+	rdp->qlen_last_fqs_check = 0;
+	rdp->n_force_qs_snap = rsp->n_force_qs;
 	rdp->blimit = blimit;
 	spin_unlock(&rnp->lock);		/* irqs remain disabled. */
 
@@ -1464,6 +1601,22 @@ int __cpuinit rcu_cpu_notify(struct notifier_block *self,
 	case CPU_UP_PREPARE_FROZEN:
 		rcu_online_cpu(cpu);
 		break;
+	case CPU_DYING:
+	case CPU_DYING_FROZEN:
+		/*
+		 * preempt_disable() in _rcu_barrier() prevents stop_machine(),
+		 * so when "on_each_cpu(rcu_barrier_func, (void *)type, 1);"
+		 * returns, all online cpus have queued rcu_barrier_func().
+		 * The dying CPU clears its cpu_online_mask bit and
+		 * moves all of its RCU callbacks to ->orphan_cbs_list
+		 * in the context of stop_machine(), so subsequent calls
+		 * to _rcu_barrier() will adopt these callbacks and only
+		 * then queue rcu_barrier_func() on all remaining CPUs.
+		 */
+		rcu_send_cbs_to_orphanage(&rcu_bh_state);
+		rcu_send_cbs_to_orphanage(&rcu_sched_state);
+		rcu_preempt_send_cbs_to_orphanage();
+		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 	case CPU_UP_CANCELED:
@@ -1526,7 +1679,8 @@ static void __init rcu_init_one(struct rcu_state *rsp)
 		cpustride *= rsp->levelspread[i];
 		rnp = rsp->level[i];
 		for (j = 0; j < rsp->levelcnt[i]; j++, rnp++) {
-			spin_lock_init(&rnp->lock);
+			if (rnp != rcu_get_root(rsp))
+				spin_lock_init(&rnp->lock);
 			rnp->gpnum = 0;
 			rnp->qsmask = 0;
 			rnp->qsmaskinit = 0;
@@ -1549,6 +1703,7 @@ static void __init rcu_init_one(struct rcu_state *rsp)
 			INIT_LIST_HEAD(&rnp->blocked_tasks[1]);
 		}
 	}
+	spin_lock_init(&rcu_get_root(rsp)->lock);
 }
 
 /*
@@ -1558,6 +1713,10 @@ static void __init rcu_init_one(struct rcu_state *rsp)
  */
 #define RCU_INIT_FLAVOR(rsp, rcu_data) \
 do { \
+	int i; \
+	int j; \
+	struct rcu_node *rnp; \
+	\
 	rcu_init_one(rsp); \
 	rnp = (rsp)->level[NUM_RCU_LVLS - 1]; \
 	j = 0; \
@@ -1570,31 +1729,8 @@ do { \
 	} \
 } while (0)
 
-#ifdef CONFIG_TREE_PREEMPT_RCU
-
-void __init __rcu_init_preempt(void)
-{
-	int i;			/* All used by RCU_INIT_FLAVOR(). */
-	int j;
-	struct rcu_node *rnp;
-
-	RCU_INIT_FLAVOR(&rcu_preempt_state, rcu_preempt_data);
-}
-
-#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-
-void __init __rcu_init_preempt(void)
-{
-}
-
-#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
-
 void __init __rcu_init(void)
 {
-	int i;			/* All used by RCU_INIT_FLAVOR(). */
-	int j;
-	struct rcu_node *rnp;
-
 	rcu_bootup_announce();
 #ifdef CONFIG_RCU_CPU_STALL_DETECTOR
 	printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
@@ -1605,6 +1741,4 @@ void __init __rcu_init(void)
 	open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
 }
 
-module_param(blimit, int, 0);
-module_param(qhimark, int, 0);
-module_param(qlowmark, int, 0);
+#include "rcutree_plugin.h"
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 8e8287a983c2..1823c6e20609 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -48,14 +48,14 @@
 #elif NR_CPUS <= RCU_FANOUT_SQ
 #  define NUM_RCU_LVLS	      2
 #  define NUM_RCU_LVL_0	      1
-#  define NUM_RCU_LVL_1	      (((NR_CPUS) + RCU_FANOUT - 1) / RCU_FANOUT)
+#  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
 #  define NUM_RCU_LVL_2	      (NR_CPUS)
 #  define NUM_RCU_LVL_3	      0
 #elif NR_CPUS <= RCU_FANOUT_CUBE
 #  define NUM_RCU_LVLS	      3
 #  define NUM_RCU_LVL_0	      1
-#  define NUM_RCU_LVL_1	      (((NR_CPUS) + RCU_FANOUT_SQ - 1) / RCU_FANOUT_SQ)
-#  define NUM_RCU_LVL_2	      (((NR_CPUS) + (RCU_FANOUT) - 1) / (RCU_FANOUT))
+#  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
+#  define NUM_RCU_LVL_2	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
 #  define NUM_RCU_LVL_3	      NR_CPUS
 #else
 # error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
@@ -79,15 +79,21 @@ struct rcu_dynticks {
  * Definition for node within the RCU grace-period-detection hierarchy.
  */
 struct rcu_node {
-	spinlock_t lock;
+	spinlock_t lock;	/* Root rcu_node's lock protects some */
+				/*  rcu_state fields as well as following. */
 	long	gpnum;		/* Current grace period for this node. */
 				/*  This will either be equal to or one */
 				/*  behind the root rcu_node's gpnum. */
 	unsigned long qsmask;	/* CPUs or groups that need to switch in */
 				/*  order for current grace period to proceed.*/
+				/*  In leaf rcu_node, each bit corresponds to */
+				/*  an rcu_data structure, otherwise, each */
+				/*  bit corresponds to a child rcu_node */
+				/*  structure. */
 	unsigned long qsmaskinit;
 				/* Per-GP initialization for qsmask. */
 	unsigned long grpmask;	/* Mask to apply to parent qsmask. */
+				/*  Only one bit will be set in this mask. */
 	int	grplo;		/* lowest-numbered CPU or group here. */
 	int	grphi;		/* highest-numbered CPU or group here. */
 	u8	grpnum;		/* CPU/group number for next level up. */
@@ -95,8 +101,23 @@ struct rcu_node {
 	struct rcu_node *parent;
 	struct list_head blocked_tasks[2];
 				/* Tasks blocked in RCU read-side critsect. */
+				/*  Grace period number (->gpnum) x blocked */
+				/*  by tasks on the (x & 0x1) element of the */
+				/*  blocked_tasks[] array. */
 } ____cacheline_internodealigned_in_smp;
 
+/*
+ * Do a full breadth-first scan of the rcu_node structures for the
+ * specified rcu_state structure.
+ */
+#define rcu_for_each_node_breadth_first(rsp, rnp) \
+	for ((rnp) = &(rsp)->node[0]; \
+	     (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++)
+
+#define rcu_for_each_leaf_node(rsp, rnp) \
+	for ((rnp) = (rsp)->level[NUM_RCU_LVLS - 1]; \
+	     (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++)
+
 /* Index values for nxttail array in struct rcu_data. */
 #define RCU_DONE_TAIL		0	/* Also RCU_WAIT head. */
 #define RCU_WAIT_TAIL		1	/* Also RCU_NEXT_READY head. */
@@ -126,23 +147,30 @@ struct rcu_data {
 	 * Any of the partitions might be empty, in which case the
 	 * pointer to that partition will be equal to the pointer for
 	 * the following partition.  When the list is empty, all of
-	 * the nxttail elements point to nxtlist, which is NULL.
+	 * the nxttail elements point to the ->nxtlist pointer itself,
+	 * which in that case is NULL.
 	 *
-	 * [*nxttail[RCU_NEXT_READY_TAIL], NULL = *nxttail[RCU_NEXT_TAIL]):
-	 *	Entries that might have arrived after current GP ended
-	 * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]):
-	 *	Entries known to have arrived before current GP ended
-	 * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]):
-	 *	Entries that batch # <= ->completed - 1: waiting for current GP
 	 * [nxtlist, *nxttail[RCU_DONE_TAIL]):
 	 *	Entries that batch # <= ->completed
 	 *	The grace period for these entries has completed, and
 	 *	the other grace-period-completed entries may be moved
 	 *	here temporarily in rcu_process_callbacks().
+	 * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]):
+	 *	Entries that batch # <= ->completed - 1: waiting for current GP
+	 * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]):
+	 *	Entries known to have arrived before current GP ended
+	 * [*nxttail[RCU_NEXT_READY_TAIL], *nxttail[RCU_NEXT_TAIL]):
+	 *	Entries that might have arrived after current GP ended
+	 *	Note that the value of *nxttail[RCU_NEXT_TAIL] will
+	 *	always be NULL, as this is the end of the list.
 	 */
 	struct rcu_head *nxtlist;
 	struct rcu_head **nxttail[RCU_NEXT_SIZE];
 	long		qlen;		/* # of queued callbacks */
+	long		qlen_last_fqs_check;
+					/* qlen at last check for QS forcing */
+	unsigned long	n_force_qs_snap;
+					/* did other CPU force QS recently? */
 	long		blimit;		/* Upper limit on a processed batch */
 
 #ifdef CONFIG_NO_HZ
@@ -216,8 +244,19 @@ struct rcu_state {
 						/* Force QS state. */
 	long	gpnum;				/* Current gp number. */
 	long	completed;			/* # of last completed gp. */
+
+	/* End  of fields guarded by root rcu_node's lock. */
+
 	spinlock_t onofflock;			/* exclude on/offline and */
-						/*  starting new GP. */
+						/*  starting new GP.  Also */
+						/*  protects the following */
+						/*  orphan_cbs fields. */
+	struct rcu_head *orphan_cbs_list;	/* list of rcu_head structs */
+						/*  orphaned by all CPUs in */
+						/*  a given leaf rcu_node */
+						/*  going offline. */
+	struct rcu_head **orphan_cbs_tail;	/* And tail pointer. */
+	long orphan_qlen;			/* Number of orphaned cbs. */
 	spinlock_t fqslock;			/* Only one task forcing */
 						/*  quiescent states. */
 	unsigned long jiffies_force_qs;		/* Time at which to invoke */
@@ -255,5 +294,30 @@ extern struct rcu_state rcu_preempt_state;
 DECLARE_PER_CPU(struct rcu_data, rcu_preempt_data);
 #endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
 
-#endif /* #ifdef RCU_TREE_NONCORE */
+#else /* #ifdef RCU_TREE_NONCORE */
+
+/* Forward declarations for rcutree_plugin.h */
+static inline void rcu_bootup_announce(void);
+long rcu_batches_completed(void);
+static void rcu_preempt_note_context_switch(int cpu);
+static int rcu_preempted_readers(struct rcu_node *rnp);
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+static void rcu_print_task_stall(struct rcu_node *rnp);
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp);
+#ifdef CONFIG_HOTPLUG_CPU
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+				     struct rcu_node *rnp,
+				     struct rcu_data *rdp);
+static void rcu_preempt_offline_cpu(int cpu);
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+static void rcu_preempt_check_callbacks(int cpu);
+static void rcu_preempt_process_callbacks(void);
+void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu));
+static int rcu_preempt_pending(int cpu);
+static int rcu_preempt_needs_cpu(int cpu);
+static void __cpuinit rcu_preempt_init_percpu_data(int cpu);
+static void rcu_preempt_send_cbs_to_orphanage(void);
+static void __init __rcu_init_preempt(void);
 
+#endif /* #else #ifdef RCU_TREE_NONCORE */
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 1cee04f627eb..ef2a58c2b9d5 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -150,6 +150,16 @@ void __rcu_read_lock(void)
 }
 EXPORT_SYMBOL_GPL(__rcu_read_lock);
 
+/*
+ * Check for preempted RCU readers blocking the current grace period
+ * for the specified rcu_node structure.  If the caller needs a reliable
+ * answer, it must hold the rcu_node's ->lock.
+ */
+static int rcu_preempted_readers(struct rcu_node *rnp)
+{
+	return !list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
+}
+
 static void rcu_read_unlock_special(struct task_struct *t)
 {
 	int empty;
@@ -196,7 +206,7 @@ static void rcu_read_unlock_special(struct task_struct *t)
 				break;
 			spin_unlock(&rnp->lock);  /* irqs remain disabled. */
 		}
-		empty = list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
+		empty = !rcu_preempted_readers(rnp);
 		list_del_init(&t->rcu_node_entry);
 		t->rcu_blocked_node = NULL;
 
@@ -207,7 +217,7 @@ static void rcu_read_unlock_special(struct task_struct *t)
 		 * drop rnp->lock and restore irq.
 		 */
 		if (!empty && rnp->qsmask == 0 &&
-		    list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1])) {
+		    !rcu_preempted_readers(rnp)) {
 			struct rcu_node *rnp_p;
 
 			if (rnp->parent == NULL) {
@@ -257,12 +267,12 @@ static void rcu_print_task_stall(struct rcu_node *rnp)
 {
 	unsigned long flags;
 	struct list_head *lp;
-	int phase = rnp->gpnum & 0x1;
+	int phase;
 	struct task_struct *t;
 
-	if (!list_empty(&rnp->blocked_tasks[phase])) {
+	if (rcu_preempted_readers(rnp)) {
 		spin_lock_irqsave(&rnp->lock, flags);
-		phase = rnp->gpnum & 0x1; /* re-read under lock. */
+		phase = rnp->gpnum & 0x1;
 		lp = &rnp->blocked_tasks[phase];
 		list_for_each_entry(t, lp, rcu_node_entry)
 			printk(" P%d", t->pid);
@@ -281,20 +291,10 @@ static void rcu_print_task_stall(struct rcu_node *rnp)
  */
 static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
 {
-	WARN_ON_ONCE(!list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]));
+	WARN_ON_ONCE(rcu_preempted_readers(rnp));
 	WARN_ON_ONCE(rnp->qsmask);
 }
 
-/*
- * Check for preempted RCU readers for the specified rcu_node structure.
- * If the caller needs a reliable answer, it must hold the rcu_node's
- * >lock.
- */
-static int rcu_preempted_readers(struct rcu_node *rnp)
-{
-	return !list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 
 /*
@@ -304,21 +304,25 @@ static int rcu_preempted_readers(struct rcu_node *rnp)
  * parent is to remove the need for rcu_read_unlock_special() to
  * make more than two attempts to acquire the target rcu_node's lock.
  *
+ * Returns 1 if there was previously a task blocking the current grace
+ * period on the specified rcu_node structure.
+ *
  * The caller must hold rnp->lock with irqs disabled.
  */
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
-				      struct rcu_node *rnp,
-				      struct rcu_data *rdp)
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+				     struct rcu_node *rnp,
+				     struct rcu_data *rdp)
 {
 	int i;
 	struct list_head *lp;
 	struct list_head *lp_root;
+	int retval = rcu_preempted_readers(rnp);
 	struct rcu_node *rnp_root = rcu_get_root(rsp);
 	struct task_struct *tp;
 
 	if (rnp == rnp_root) {
 		WARN_ONCE(1, "Last CPU thought to be offlined?");
-		return;  /* Shouldn't happen: at least one CPU online. */
+		return 0;  /* Shouldn't happen: at least one CPU online. */
 	}
 	WARN_ON_ONCE(rnp != rdp->mynode &&
 		     (!list_empty(&rnp->blocked_tasks[0]) ||
@@ -342,6 +346,8 @@ static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
 			spin_unlock(&rnp_root->lock); /* irqs remain disabled */
 		}
 	}
+
+	return retval;
 }
 
 /*
@@ -393,6 +399,17 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
 EXPORT_SYMBOL_GPL(call_rcu);
 
 /*
+ * Wait for an rcu-preempt grace period.  We are supposed to expedite the
+ * grace period, but this is the crude slow compatability hack, so just
+ * invoke synchronize_rcu().
+ */
+void synchronize_rcu_expedited(void)
+{
+	synchronize_rcu();
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
+
+/*
  * Check to see if there is any immediate preemptable-RCU-related work
  * to be done.
  */
@@ -410,6 +427,15 @@ static int rcu_preempt_needs_cpu(int cpu)
 	return !!per_cpu(rcu_preempt_data, cpu).nxtlist;
 }
 
+/**
+ * rcu_barrier - Wait until all in-flight call_rcu() callbacks complete.
+ */
+void rcu_barrier(void)
+{
+	_rcu_barrier(&rcu_preempt_state, call_rcu);
+}
+EXPORT_SYMBOL_GPL(rcu_barrier);
+
 /*
  * Initialize preemptable RCU's per-CPU data.
  */
@@ -419,6 +445,22 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
 }
 
 /*
+ * Move preemptable RCU's callbacks to ->orphan_cbs_list.
+ */
+static void rcu_preempt_send_cbs_to_orphanage(void)
+{
+	rcu_send_cbs_to_orphanage(&rcu_preempt_state);
+}
+
+/*
+ * Initialize preemptable RCU's state structures.
+ */
+static void __init __rcu_init_preempt(void)
+{
+	RCU_INIT_FLAVOR(&rcu_preempt_state, rcu_preempt_data);
+}
+
+/*
  * Check for a task exiting while in a preemptable-RCU read-side
  * critical section, clean up if so.  No need to issue warnings,
  * as debug_check_no_locks_held() already does this if lockdep
@@ -461,6 +503,15 @@ static void rcu_preempt_note_context_switch(int cpu)
 {
 }
 
+/*
+ * Because preemptable RCU does not exist, there are never any preempted
+ * RCU readers.
+ */
+static int rcu_preempted_readers(struct rcu_node *rnp)
+{
+	return 0;
+}
+
 #ifdef CONFIG_RCU_CPU_STALL_DETECTOR
 
 /*
@@ -483,25 +534,19 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
 	WARN_ON_ONCE(rnp->qsmask);
 }
 
-/*
- * Because preemptable RCU does not exist, there are never any preempted
- * RCU readers.
- */
-static int rcu_preempted_readers(struct rcu_node *rnp)
-{
-	return 0;
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 
 /*
  * Because preemptable RCU does not exist, it never needs to migrate
- * tasks that were blocked within RCU read-side critical sections.
+ * tasks that were blocked within RCU read-side critical sections, and
+ * such non-existent tasks cannot possibly have been blocking the current
+ * grace period.
  */
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
-				      struct rcu_node *rnp,
-				      struct rcu_data *rdp)
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+				     struct rcu_node *rnp,
+				     struct rcu_data *rdp)
 {
+	return 0;
 }
 
 /*
@@ -518,7 +563,7 @@ static void rcu_preempt_offline_cpu(int cpu)
  * Because preemptable RCU does not exist, it never has any callbacks
  * to check.
  */
-void rcu_preempt_check_callbacks(int cpu)
+static void rcu_preempt_check_callbacks(int cpu)
 {
 }
 
@@ -526,7 +571,7 @@ void rcu_preempt_check_callbacks(int cpu)
  * Because preemptable RCU does not exist, it never has any callbacks
  * to process.
  */
-void rcu_preempt_process_callbacks(void)
+static void rcu_preempt_process_callbacks(void)
 {
 }
 
@@ -540,6 +585,16 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
 EXPORT_SYMBOL_GPL(call_rcu);
 
 /*
+ * Wait for an rcu-preempt grace period, but make it happen quickly.
+ * But because preemptable RCU does not exist, map to rcu-sched.
+ */
+void synchronize_rcu_expedited(void)
+{
+	synchronize_sched_expedited();
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
+
+/*
  * Because preemptable RCU does not exist, it never has any work to do.
  */
 static int rcu_preempt_pending(int cpu)
@@ -556,6 +611,16 @@ static int rcu_preempt_needs_cpu(int cpu)
 }
 
 /*
+ * Because preemptable RCU does not exist, rcu_barrier() is just
+ * another name for rcu_barrier_sched().
+ */
+void rcu_barrier(void)
+{
+	rcu_barrier_sched();
+}
+EXPORT_SYMBOL_GPL(rcu_barrier);
+
+/*
  * Because preemptable RCU does not exist, there is no per-CPU
  * data to initialize.
  */
@@ -563,4 +628,18 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
 {
 }
 
+/*
+ * Because there is no preemptable RCU, there are no callbacks to move.
+ */
+static void rcu_preempt_send_cbs_to_orphanage(void)
+{
+}
+
+/*
+ * Because preemptable RCU does not exist, it need not be initialized.
+ */
+static void __init __rcu_init_preempt(void)
+{
+}
+
 #endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index c89f5e9fd173..4b31c779e62e 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -93,7 +93,7 @@ static int rcudata_open(struct inode *inode, struct file *file)
 	return single_open(file, show_rcudata, NULL);
 }
 
-static struct file_operations rcudata_fops = {
+static const struct file_operations rcudata_fops = {
 	.owner = THIS_MODULE,
 	.open = rcudata_open,
 	.read = seq_read,
@@ -145,7 +145,7 @@ static int rcudata_csv_open(struct inode *inode, struct file *file)
 	return single_open(file, show_rcudata_csv, NULL);
 }
 
-static struct file_operations rcudata_csv_fops = {
+static const struct file_operations rcudata_csv_fops = {
 	.owner = THIS_MODULE,
 	.open = rcudata_csv_open,
 	.read = seq_read,
@@ -159,13 +159,13 @@ static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp)
 	struct rcu_node *rnp;
 
 	seq_printf(m, "c=%ld g=%ld s=%d jfq=%ld j=%x "
-	              "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu\n",
+		      "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu oqlen=%ld\n",
 		   rsp->completed, rsp->gpnum, rsp->signaled,
 		   (long)(rsp->jiffies_force_qs - jiffies),
 		   (int)(jiffies & 0xffff),
 		   rsp->n_force_qs, rsp->n_force_qs_ngp,
 		   rsp->n_force_qs - rsp->n_force_qs_ngp,
-		   rsp->n_force_qs_lh);
+		   rsp->n_force_qs_lh, rsp->orphan_qlen);
 	for (rnp = &rsp->node[0]; rnp - &rsp->node[0] < NUM_RCU_NODES; rnp++) {
 		if (rnp->level != level) {
 			seq_puts(m, "\n");
@@ -196,7 +196,7 @@ static int rcuhier_open(struct inode *inode, struct file *file)
 	return single_open(file, show_rcuhier, NULL);
 }
 
-static struct file_operations rcuhier_fops = {
+static const struct file_operations rcuhier_fops = {
 	.owner = THIS_MODULE,
 	.open = rcuhier_open,
 	.read = seq_read,
@@ -222,7 +222,7 @@ static int rcugp_open(struct inode *inode, struct file *file)
 	return single_open(file, show_rcugp, NULL);
 }
 
-static struct file_operations rcugp_fops = {
+static const struct file_operations rcugp_fops = {
 	.owner = THIS_MODULE,
 	.open = rcugp_open,
 	.read = seq_read,
@@ -276,7 +276,7 @@ static int rcu_pending_open(struct inode *inode, struct file *file)
 	return single_open(file, show_rcu_pending, NULL);
 }
 
-static struct file_operations rcu_pending_fops = {
+static const struct file_operations rcu_pending_fops = {
 	.owner = THIS_MODULE,
 	.open = rcu_pending_open,
 	.read = seq_read,
diff --git a/kernel/res_counter.c b/kernel/res_counter.c
index 88faec23e833..bcdabf37c40b 100644
--- a/kernel/res_counter.c
+++ b/kernel/res_counter.c
@@ -37,27 +37,17 @@ int res_counter_charge_locked(struct res_counter *counter, unsigned long val)
 }
 
 int res_counter_charge(struct res_counter *counter, unsigned long val,
-			struct res_counter **limit_fail_at,
-			struct res_counter **soft_limit_fail_at)
+			struct res_counter **limit_fail_at)
 {
 	int ret;
 	unsigned long flags;
 	struct res_counter *c, *u;
 
 	*limit_fail_at = NULL;
-	if (soft_limit_fail_at)
-		*soft_limit_fail_at = NULL;
 	local_irq_save(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		ret = res_counter_charge_locked(c, val);
-		/*
-		 * With soft limits, we return the highest ancestor
-		 * that exceeds its soft limit
-		 */
-		if (soft_limit_fail_at &&
-			!res_counter_soft_limit_check_locked(c))
-			*soft_limit_fail_at = c;
 		spin_unlock(&c->lock);
 		if (ret < 0) {
 			*limit_fail_at = c;
@@ -85,8 +75,7 @@ void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val)
 	counter->usage -= val;
 }
 
-void res_counter_uncharge(struct res_counter *counter, unsigned long val,
-				bool *was_soft_limit_excess)
+void res_counter_uncharge(struct res_counter *counter, unsigned long val)
 {
 	unsigned long flags;
 	struct res_counter *c;
@@ -94,9 +83,6 @@ void res_counter_uncharge(struct res_counter *counter, unsigned long val,
 	local_irq_save(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
-		if (was_soft_limit_excess)
-			*was_soft_limit_excess =
-				!res_counter_soft_limit_check_locked(c);
 		res_counter_uncharge_locked(c, val);
 		spin_unlock(&c->lock);
 	}
diff --git a/kernel/sched.c b/kernel/sched.c
index 526d237b8ce5..a455dca884a6 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -676,6 +676,7 @@ inline void update_rq_clock(struct rq *rq)
 
 /**
  * runqueue_is_locked
+ * @cpu: the processor in question.
  *
  * Returns true if the current cpu runqueue is locked.
  * This interface allows printk to be called with the runqueue lock
@@ -780,7 +781,7 @@ static int sched_feat_open(struct inode *inode, struct file *filp)
 	return single_open(filp, sched_feat_show, NULL);
 }
 
-static struct file_operations sched_feat_fops = {
+static const struct file_operations sched_feat_fops = {
 	.open		= sched_feat_open,
 	.write		= sched_feat_write,
 	.read		= seq_read,
@@ -2307,7 +2308,7 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state,
 {
 	int cpu, orig_cpu, this_cpu, success = 0;
 	unsigned long flags;
-	struct rq *rq;
+	struct rq *rq, *orig_rq;
 
 	if (!sched_feat(SYNC_WAKEUPS))
 		wake_flags &= ~WF_SYNC;
@@ -2315,7 +2316,7 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state,
 	this_cpu = get_cpu();
 
 	smp_wmb();
-	rq = task_rq_lock(p, &flags);
+	rq = orig_rq = task_rq_lock(p, &flags);
 	update_rq_clock(rq);
 	if (!(p->state & state))
 		goto out;
@@ -2346,6 +2347,10 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state,
 		set_task_cpu(p, cpu);
 
 	rq = task_rq_lock(p, &flags);
+
+	if (rq != orig_rq)
+		update_rq_clock(rq);
+
 	WARN_ON(p->state != TASK_WAKING);
 	cpu = task_cpu(p);
 
@@ -2511,22 +2516,17 @@ void sched_fork(struct task_struct *p, int clone_flags)
 	__sched_fork(p);
 
 	/*
-	 * Make sure we do not leak PI boosting priority to the child.
-	 */
-	p->prio = current->normal_prio;
-
-	/*
 	 * Revert to default priority/policy on fork if requested.
 	 */
 	if (unlikely(p->sched_reset_on_fork)) {
-		if (p->policy == SCHED_FIFO || p->policy == SCHED_RR)
+		if (p->policy == SCHED_FIFO || p->policy == SCHED_RR) {
 			p->policy = SCHED_NORMAL;
-
-		if (p->normal_prio < DEFAULT_PRIO)
-			p->prio = DEFAULT_PRIO;
+			p->normal_prio = p->static_prio;
+		}
 
 		if (PRIO_TO_NICE(p->static_prio) < 0) {
 			p->static_prio = NICE_TO_PRIO(0);
+			p->normal_prio = p->static_prio;
 			set_load_weight(p);
 		}
 
@@ -2537,6 +2537,11 @@ void sched_fork(struct task_struct *p, int clone_flags)
 		p->sched_reset_on_fork = 0;
 	}
 
+	/*
+	 * Make sure we do not leak PI boosting priority to the child.
+	 */
+	p->prio = current->normal_prio;
+
 	if (!rt_prio(p->prio))
 		p->sched_class = &fair_sched_class;
 
@@ -2577,8 +2582,6 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags)
 	BUG_ON(p->state != TASK_RUNNING);
 	update_rq_clock(rq);
 
-	p->prio = effective_prio(p);
-
 	if (!p->sched_class->task_new || !current->se.on_rq) {
 		activate_task(rq, p, 0);
 	} else {
@@ -3654,6 +3657,7 @@ static void update_group_power(struct sched_domain *sd, int cpu)
 
 /**
  * update_sg_lb_stats - Update sched_group's statistics for load balancing.
+ * @sd: The sched_domain whose statistics are to be updated.
  * @group: sched_group whose statistics are to be updated.
  * @this_cpu: Cpu for which load balance is currently performed.
  * @idle: Idle status of this_cpu
@@ -6716,9 +6720,6 @@ EXPORT_SYMBOL(yield);
 /*
  * This task is about to go to sleep on IO. Increment rq->nr_iowait so
  * that process accounting knows that this is a task in IO wait state.
- *
- * But don't do that if it is a deliberate, throttling IO wait (this task
- * has set its backing_dev_info: the queue against which it should throttle)
  */
 void __sched io_schedule(void)
 {
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index ac2e1dc708bd..479ce5682d7c 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -127,7 +127,7 @@ again:
 	clock = wrap_max(clock, min_clock);
 	clock = wrap_min(clock, max_clock);
 
-	if (cmpxchg(&scd->clock, old_clock, clock) != old_clock)
+	if (cmpxchg64(&scd->clock, old_clock, clock) != old_clock)
 		goto again;
 
 	return clock;
@@ -163,7 +163,7 @@ again:
 		val = remote_clock;
 	}
 
-	if (cmpxchg(ptr, old_val, val) != old_val)
+	if (cmpxchg64(ptr, old_val, val) != old_val)
 		goto again;
 
 	return val;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 4e777b47eeda..c32c3e643daa 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -861,12 +861,21 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se);
 static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq)
 {
 	struct sched_entity *se = __pick_next_entity(cfs_rq);
+	struct sched_entity *buddy;
 
-	if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, se) < 1)
-		return cfs_rq->next;
+	if (cfs_rq->next) {
+		buddy = cfs_rq->next;
+		cfs_rq->next = NULL;
+		if (wakeup_preempt_entity(buddy, se) < 1)
+			return buddy;
+	}
 
-	if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, se) < 1)
-		return cfs_rq->last;
+	if (cfs_rq->last) {
+		buddy = cfs_rq->last;
+		cfs_rq->last = NULL;
+		if (wakeup_preempt_entity(buddy, se) < 1)
+			return buddy;
+	}
 
 	return se;
 }
@@ -1654,16 +1663,6 @@ static struct task_struct *pick_next_task_fair(struct rq *rq)
 
 	do {
 		se = pick_next_entity(cfs_rq);
-		/*
-		 * If se was a buddy, clear it so that it will have to earn
-		 * the favour again.
-		 *
-		 * If se was not a buddy, clear the buddies because neither
-		 * was elegible to run, let them earn it again.
-		 *
-		 * IOW. unconditionally clear buddies.
-		 */
-		__clear_buddies(cfs_rq, NULL);
 		set_next_entity(cfs_rq, se);
 		cfs_rq = group_cfs_rq(se);
 	} while (cfs_rq);
diff --git a/kernel/sys.c b/kernel/sys.c
index 255475d163e0..ce17760d9c51 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1110,6 +1110,8 @@ SYSCALL_DEFINE0(setsid)
 	err = session;
 out:
 	write_unlock_irq(&tasklist_lock);
+	if (err > 0)
+		proc_sid_connector(group_leader);
 	return err;
 }
 
@@ -1546,24 +1548,37 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
 			if (arg4 | arg5)
 				return -EINVAL;
 			switch (arg2) {
-			case 0:
+			case PR_MCE_KILL_CLEAR:
 				if (arg3 != 0)
 					return -EINVAL;
 				current->flags &= ~PF_MCE_PROCESS;
 				break;
-			case 1:
+			case PR_MCE_KILL_SET:
 				current->flags |= PF_MCE_PROCESS;
-				if (arg3 != 0)
+				if (arg3 == PR_MCE_KILL_EARLY)
 					current->flags |= PF_MCE_EARLY;
-				else
+				else if (arg3 == PR_MCE_KILL_LATE)
 					current->flags &= ~PF_MCE_EARLY;
+				else if (arg3 == PR_MCE_KILL_DEFAULT)
+					current->flags &=
+						~(PF_MCE_EARLY|PF_MCE_PROCESS);
+				else
+					return -EINVAL;
 				break;
 			default:
 				return -EINVAL;
 			}
 			error = 0;
 			break;
-
+		case PR_MCE_KILL_GET:
+			if (arg2 | arg3 | arg4 | arg5)
+				return -EINVAL;
+			if (current->flags & PF_MCE_PROCESS)
+				error = (current->flags & PF_MCE_EARLY) ?
+					PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE;
+			else
+				error = PR_MCE_KILL_DEFAULT;
+			break;
 		default:
 			error = -EINVAL;
 			break;
diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c
index b38423ca711a..b6e7aaea4604 100644
--- a/kernel/sysctl_check.c
+++ b/kernel/sysctl_check.c
@@ -1521,7 +1521,7 @@ int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table)
 			if (!table->ctl_name && table->strategy)
 				set_fail(&fail, table, "Strategy without ctl_name");
 #endif
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_SYSCTL
 			if (table->procname && !table->proc_handler)
 				set_fail(&fail, table, "No proc_handler");
 #endif
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index e0f59a21c061..89aed5933ed4 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -231,6 +231,13 @@ void tick_nohz_stop_sched_tick(int inidle)
 	if (!inidle && !ts->inidle)
 		goto end;
 
+	/*
+	 * Set ts->inidle unconditionally. Even if the system did not
+	 * switch to NOHZ mode the cpu frequency governers rely on the
+	 * update of the idle time accounting in tick_nohz_start_idle().
+	 */
+	ts->inidle = 1;
+
 	now = tick_nohz_start_idle(ts);
 
 	/*
@@ -248,8 +255,6 @@ void tick_nohz_stop_sched_tick(int inidle)
 	if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
 		goto end;
 
-	ts->inidle = 1;
-
 	if (need_resched())
 		goto end;
 
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index fb0f46fa1ecd..c3a4e2907eaa 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -13,6 +13,7 @@
 #include <linux/percpu.h>
 #include <linux/init.h>
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/sysdev.h>
 #include <linux/clocksource.h>
 #include <linux/jiffies.h>
diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index fddd69d16e03..1b5b7aa2fdfd 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -275,7 +275,7 @@ static int timer_list_open(struct inode *inode, struct file *filp)
 	return single_open(filp, timer_list_show, NULL);
 }
 
-static struct file_operations timer_list_fops = {
+static const struct file_operations timer_list_fops = {
 	.open		= timer_list_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c
index 4cde8b9c716f..ee5681f8d7ec 100644
--- a/kernel/time/timer_stats.c
+++ b/kernel/time/timer_stats.c
@@ -395,7 +395,7 @@ static int tstats_open(struct inode *inode, struct file *filp)
 	return single_open(filp, tstats_show, NULL);
 }
 
-static struct file_operations tstats_fops = {
+static const struct file_operations tstats_fops = {
 	.open		= tstats_open,
 	.read		= seq_read,
 	.write		= tstats_write,
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 3eb159c277c8..d9d6206e0b14 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -856,6 +856,37 @@ static void blk_add_trace_remap(struct request_queue *q, struct bio *bio,
 }
 
 /**
+ * blk_add_trace_rq_remap - Add a trace for a request-remap operation
+ * @q:		queue the io is for
+ * @rq:		the source request
+ * @dev:	target device
+ * @from:	source sector
+ *
+ * Description:
+ *     Device mapper remaps request to other devices.
+ *     Add a trace for that action.
+ *
+ **/
+static void blk_add_trace_rq_remap(struct request_queue *q,
+				   struct request *rq, dev_t dev,
+				   sector_t from)
+{
+	struct blk_trace *bt = q->blk_trace;
+	struct blk_io_trace_remap r;
+
+	if (likely(!bt))
+		return;
+
+	r.device_from = cpu_to_be32(dev);
+	r.device_to   = cpu_to_be32(disk_devt(rq->rq_disk));
+	r.sector_from = cpu_to_be64(from);
+
+	__blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq),
+			rq_data_dir(rq), BLK_TA_REMAP, !!rq->errors,
+			sizeof(r), &r);
+}
+
+/**
  * blk_add_driver_data - Add binary message with driver-specific data
  * @q:		queue the io is for
  * @rq:		io request
@@ -922,10 +953,13 @@ static void blk_register_tracepoints(void)
 	WARN_ON(ret);
 	ret = register_trace_block_remap(blk_add_trace_remap);
 	WARN_ON(ret);
+	ret = register_trace_block_rq_remap(blk_add_trace_rq_remap);
+	WARN_ON(ret);
 }
 
 static void blk_unregister_tracepoints(void)
 {
+	unregister_trace_block_rq_remap(blk_add_trace_rq_remap);
 	unregister_trace_block_remap(blk_add_trace_remap);
 	unregister_trace_block_split(blk_add_trace_split);
 	unregister_trace_block_unplug_io(blk_add_trace_unplug_io);
@@ -1657,6 +1691,11 @@ int blk_trace_init_sysfs(struct device *dev)
 	return sysfs_create_group(&dev->kobj, &blk_trace_attr_group);
 }
 
+void blk_trace_remove_sysfs(struct device *dev)
+{
+	sysfs_remove_group(&dev->kobj, &blk_trace_attr_group);
+}
+
 #endif /* CONFIG_BLK_DEV_IO_TRACE */
 
 #ifdef CONFIG_EVENT_TRACING
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 46592feab5a6..37ba67e33265 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -225,7 +225,11 @@ static void ftrace_update_pid_func(void)
 	if (ftrace_trace_function == ftrace_stub)
 		return;
 
+#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	func = ftrace_trace_function;
+#else
+	func = __ftrace_trace_function;
+#endif
 
 	if (ftrace_pid_trace) {
 		set_ftrace_pid_function(func);
@@ -1074,14 +1078,9 @@ static void ftrace_replace_code(int enable)
 		failed = __ftrace_replace_code(rec, enable);
 		if (failed) {
 			rec->flags |= FTRACE_FL_FAILED;
-			if ((system_state == SYSTEM_BOOTING) ||
-			    !core_kernel_text(rec->ip)) {
-				ftrace_free_rec(rec);
-				} else {
-				ftrace_bug(failed, rec->ip);
-					/* Stop processing */
-					return;
-				}
+			ftrace_bug(failed, rec->ip);
+			/* Stop processing */
+			return;
 		}
 	} while_for_each_ftrace_rec();
 }
@@ -2658,19 +2657,17 @@ static int ftrace_convert_nops(struct module *mod,
 }
 
 #ifdef CONFIG_MODULES
-void ftrace_release(void *start, void *end)
+void ftrace_release_mod(struct module *mod)
 {
 	struct dyn_ftrace *rec;
 	struct ftrace_page *pg;
-	unsigned long s = (unsigned long)start;
-	unsigned long e = (unsigned long)end;
 
-	if (ftrace_disabled || !start || start == end)
+	if (ftrace_disabled)
 		return;
 
 	mutex_lock(&ftrace_lock);
 	do_for_each_ftrace_rec(pg, rec) {
-		if ((rec->ip >= s) && (rec->ip < e)) {
+		if (within_module_core(rec->ip, mod)) {
 			/*
 			 * rec->ip is changed in ftrace_free_rec()
 			 * It should not between s and e if record was freed.
@@ -2702,9 +2699,7 @@ static int ftrace_module_notify(struct notifier_block *self,
 				   mod->num_ftrace_callsites);
 		break;
 	case MODULE_STATE_GOING:
-		ftrace_release(mod->ftrace_callsites,
-			       mod->ftrace_callsites +
-			       mod->num_ftrace_callsites);
+		ftrace_release_mod(mod);
 		break;
 	}
 
diff --git a/kernel/trace/kmemtrace.c b/kernel/trace/kmemtrace.c
index 81b1645c8549..a91da69f153a 100644
--- a/kernel/trace/kmemtrace.c
+++ b/kernel/trace/kmemtrace.c
@@ -501,7 +501,7 @@ static int __init init_kmem_tracer(void)
 		return 1;
 	}
 
-	if (!register_tracer(&kmem_tracer)) {
+	if (register_tracer(&kmem_tracer) != 0) {
 		pr_warning("Warning: could not register the kmem tracer\n");
 		return 1;
 	}
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 45068269ebb1..c820b0310a12 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1393,7 +1393,7 @@ int trace_array_vprintk(struct trace_array *tr,
 
 int trace_vprintk(unsigned long ip, const char *fmt, va_list args)
 {
-	return trace_array_printk(&global_trace, ip, fmt, args);
+	return trace_array_vprintk(&global_trace, ip, fmt, args);
 }
 EXPORT_SYMBOL_GPL(trace_vprintk);
 
diff --git a/kernel/trace/trace_branch.c b/kernel/trace/trace_branch.c
index 7a7a9fd249a9..4a194f08f88c 100644
--- a/kernel/trace/trace_branch.c
+++ b/kernel/trace/trace_branch.c
@@ -34,6 +34,7 @@ probe_likely_condition(struct ftrace_branch_data *f, int val, int expect)
 	struct trace_array *tr = branch_tracer;
 	struct ring_buffer_event *event;
 	struct trace_branch *entry;
+	struct ring_buffer *buffer;
 	unsigned long flags;
 	int cpu, pc;
 	const char *p;
@@ -54,7 +55,8 @@ probe_likely_condition(struct ftrace_branch_data *f, int val, int expect)
 		goto out;
 
 	pc = preempt_count();
-	event = trace_buffer_lock_reserve(tr, TRACE_BRANCH,
+	buffer = tr->buffer;
+	event = trace_buffer_lock_reserve(buffer, TRACE_BRANCH,
 					  sizeof(*entry), flags, pc);
 	if (!event)
 		goto out;
@@ -74,8 +76,8 @@ probe_likely_condition(struct ftrace_branch_data *f, int val, int expect)
 	entry->line = f->line;
 	entry->correct = val == expect;
 
-	if (!filter_check_discard(call, entry, tr->buffer, event))
-		ring_buffer_unlock_commit(tr->buffer, event);
+	if (!filter_check_discard(call, entry, buffer, event))
+		ring_buffer_unlock_commit(buffer, event);
 
  out:
 	atomic_dec(&tr->data[cpu]->disabled);
diff --git a/kernel/trace/trace_event_profile.c b/kernel/trace/trace_event_profile.c
index dd44b8768867..8d5c171cc998 100644
--- a/kernel/trace/trace_event_profile.c
+++ b/kernel/trace/trace_event_profile.c
@@ -31,7 +31,7 @@ static int ftrace_profile_enable_event(struct ftrace_event_call *event)
 	if (atomic_inc_return(&event->profile_count))
 		return 0;
 
-	if (!total_profile_count++) {
+	if (!total_profile_count) {
 		buf = (char *)alloc_percpu(profile_buf_t);
 		if (!buf)
 			goto fail_buf;
@@ -46,14 +46,19 @@ static int ftrace_profile_enable_event(struct ftrace_event_call *event)
 	}
 
 	ret = event->profile_enable();
-	if (!ret)
+	if (!ret) {
+		total_profile_count++;
 		return 0;
+	}
 
-	kfree(trace_profile_buf_nmi);
 fail_buf_nmi:
-	kfree(trace_profile_buf);
+	if (!total_profile_count) {
+		free_percpu(trace_profile_buf_nmi);
+		free_percpu(trace_profile_buf);
+		trace_profile_buf_nmi = NULL;
+		trace_profile_buf = NULL;
+	}
 fail_buf:
-	total_profile_count--;
 	atomic_dec(&event->profile_count);
 
 	return ret;
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 23245785927f..98a6cc5c64ed 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -933,8 +933,9 @@ static void postfix_clear(struct filter_parse_state *ps)
 
 	while (!list_empty(&ps->postfix)) {
 		elt = list_first_entry(&ps->postfix, struct postfix_elt, list);
-		kfree(elt->operand);
 		list_del(&elt->list);
+		kfree(elt->operand);
+		kfree(elt);
 	}
 }
 
diff --git a/kernel/trace/trace_hw_branches.c b/kernel/trace/trace_hw_branches.c
index 23b63859130e..69543a905cd5 100644
--- a/kernel/trace/trace_hw_branches.c
+++ b/kernel/trace/trace_hw_branches.c
@@ -165,6 +165,7 @@ void trace_hw_branch(u64 from, u64 to)
 	struct ftrace_event_call *call = &event_hw_branch;
 	struct trace_array *tr = hw_branch_trace;
 	struct ring_buffer_event *event;
+	struct ring_buffer *buf;
 	struct hw_branch_entry *entry;
 	unsigned long irq1;
 	int cpu;
@@ -180,7 +181,8 @@ void trace_hw_branch(u64 from, u64 to)
 	if (atomic_inc_return(&tr->data[cpu]->disabled) != 1)
 		goto out;
 
-	event = trace_buffer_lock_reserve(tr, TRACE_HW_BRANCHES,
+	buf = tr->buffer;
+	event = trace_buffer_lock_reserve(buf, TRACE_HW_BRANCHES,
 					  sizeof(*entry), 0, 0);
 	if (!event)
 		goto out;
@@ -189,8 +191,8 @@ void trace_hw_branch(u64 from, u64 to)
 	entry->ent.type = TRACE_HW_BRANCHES;
 	entry->from = from;
 	entry->to   = to;
-	if (!filter_check_discard(call, entry, tr->buffer, event))
-		trace_buffer_unlock_commit(tr, event, 0, 0);
+	if (!filter_check_discard(call, entry, buf, event))
+		trace_buffer_unlock_commit(buf, event, 0, 0);
 
  out:
 	atomic_dec(&tr->data[cpu]->disabled);
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index f572f44c6e1e..ed17565826b0 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -486,16 +486,18 @@ int trace_print_lat_fmt(struct trace_seq *s, struct trace_entry *entry)
 				hardirq ? 'h' : softirq ? 's' : '.'))
 		return 0;
 
-	if (entry->lock_depth < 0)
-		ret = trace_seq_putc(s, '.');
+	if (entry->preempt_count)
+		ret = trace_seq_printf(s, "%x", entry->preempt_count);
 	else
-		ret = trace_seq_printf(s, "%d", entry->lock_depth);
+		ret = trace_seq_putc(s, '.');
+
 	if (!ret)
 		return 0;
 
-	if (entry->preempt_count)
-		return trace_seq_printf(s, "%x", entry->preempt_count);
-	return trace_seq_putc(s, '.');
+	if (entry->lock_depth < 0)
+		return trace_seq_putc(s, '.');
+
+	return trace_seq_printf(s, "%d", entry->lock_depth);
 }
 
 static int
@@ -883,7 +885,7 @@ static int trace_ctxwake_raw(struct trace_iterator *iter, char S)
 	trace_assign_type(field, iter->ent);
 
 	if (!S)
-		task_state_char(field->prev_state);
+		S = task_state_char(field->prev_state);
 	T = task_state_char(field->next_state);
 	if (!trace_seq_printf(&iter->seq, "%d %d %c %d %d %d %c\n",
 			      field->prev_pid,
@@ -918,7 +920,7 @@ static int trace_ctxwake_hex(struct trace_iterator *iter, char S)
 	trace_assign_type(field, iter->ent);
 
 	if (!S)
-		task_state_char(field->prev_state);
+		S = task_state_char(field->prev_state);
 	T = task_state_char(field->next_state);
 
 	SEQ_PUT_HEX_FIELD_RET(s, field->prev_pid);
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index 9fbce6c9d2e1..527e17eae575 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -166,7 +166,7 @@ int syscall_exit_format(struct ftrace_event_call *call, struct trace_seq *s)
 			       "\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
 			       "\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n",
 			       SYSCALL_FIELD(int, nr),
-			       SYSCALL_FIELD(unsigned long, ret));
+			       SYSCALL_FIELD(long, ret));
 	if (!ret)
 		return 0;
 
@@ -212,7 +212,7 @@ int syscall_exit_define_fields(struct ftrace_event_call *call)
 	if (ret)
 		return ret;
 
-	ret = trace_define_field(call, SYSCALL_FIELD(unsigned long, ret), 0,
+	ret = trace_define_field(call, SYSCALL_FIELD(long, ret), 0,
 				 FILTER_OTHER);
 
 	return ret;
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index addfe2df93b1..12328147132c 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -640,6 +640,24 @@ int schedule_delayed_work(struct delayed_work *dwork,
 EXPORT_SYMBOL(schedule_delayed_work);
 
 /**
+ * flush_delayed_work - block until a dwork_struct's callback has terminated
+ * @dwork: the delayed work which is to be flushed
+ *
+ * Any timeout is cancelled, and any pending work is run immediately.
+ */
+void flush_delayed_work(struct delayed_work *dwork)
+{
+	if (del_timer_sync(&dwork->timer)) {
+		struct cpu_workqueue_struct *cwq;
+		cwq = wq_per_cpu(keventd_wq, get_cpu());
+		__queue_work(cwq, &dwork->work);
+		put_cpu();
+	}
+	flush_work(&dwork->work);
+}
+EXPORT_SYMBOL(flush_delayed_work);
+
+/**
  * schedule_delayed_work_on - queue work in global workqueue on CPU after delay
  * @cpu: cpu to use
  * @dwork: job to be done
@@ -667,21 +685,38 @@ EXPORT_SYMBOL(schedule_delayed_work_on);
 int schedule_on_each_cpu(work_func_t func)
 {
 	int cpu;
+	int orig = -1;
 	struct work_struct *works;
 
 	works = alloc_percpu(struct work_struct);
 	if (!works)
 		return -ENOMEM;
 
+	/*
+	 * when running in keventd don't schedule a work item on itself.
+	 * Can just call directly because the work queue is already bound.
+	 * This also is faster.
+	 * Make this a generic parameter for other workqueues?
+	 */
+	if (current_is_keventd()) {
+		orig = raw_smp_processor_id();
+		INIT_WORK(per_cpu_ptr(works, orig), func);
+		func(per_cpu_ptr(works, orig));
+	}
+
 	get_online_cpus();
 	for_each_online_cpu(cpu) {
 		struct work_struct *work = per_cpu_ptr(works, cpu);
 
+		if (cpu == orig)
+			continue;
 		INIT_WORK(work, func);
 		schedule_work_on(cpu, work);
 	}
-	for_each_online_cpu(cpu)
-		flush_work(per_cpu_ptr(works, cpu));
+	for_each_online_cpu(cpu) {
+		if (cpu != orig)
+			flush_work(per_cpu_ptr(works, cpu));
+	}
 	put_online_cpus();
 	free_percpu(works);
 	return 0;
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 891155817bc6..234ceb10861f 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -346,8 +346,9 @@ config SLUB_STATS
 
 config DEBUG_KMEMLEAK
 	bool "Kernel memory leak detector"
-	depends on DEBUG_KERNEL && EXPERIMENTAL && (X86 || ARM || PPC) && \
-		!MEMORY_HOTPLUG
+	depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \
+		(X86 || ARM || PPC || S390)
+
 	select DEBUG_FS if SYSFS
 	select STACKTRACE if STACKTRACE_SUPPORT
 	select KALLSYMS
@@ -370,7 +371,7 @@ config DEBUG_KMEMLEAK
 config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
 	int "Maximum kmemleak early log entries"
 	depends on DEBUG_KMEMLEAK
-	range 200 2000
+	range 200 40000
 	default 400
 	help
 	  Kmemleak must track all the memory allocations to avoid
@@ -391,7 +392,7 @@ config DEBUG_KMEMLEAK_TEST
 
 config DEBUG_PREEMPT
 	bool "Debug preemptible kernel"
-	depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64)
+	depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT
 	default y
 	help
 	  If you say Y here then the kernel will use a debug variant of the
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 2755a3bd16a1..eae56fddfa3b 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -9,6 +9,7 @@
  */
 #include <linux/debugobjects.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
 #include <linux/hash.h>
diff --git a/lib/fault-inject.c b/lib/fault-inject.c
index f97af55bdd96..7e65af70635e 100644
--- a/lib/fault-inject.c
+++ b/lib/fault-inject.c
@@ -1,6 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/random.h>
+#include <linux/sched.h>
 #include <linux/stat.h>
 #include <linux/types.h>
 #include <linux/fs.h>
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index b91839e9e892..33bed5e67a21 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -1771,7 +1771,7 @@ int vsscanf(const char * buf, const char * fmt, va_list args)
 		 * advance both strings to next white space
 		 */
 		if (*fmt == '*') {
-			while (!isspace(*fmt) && *fmt)
+			while (!isspace(*fmt) && *fmt != '%' && *fmt)
 				fmt++;
 			while (!isspace(*str) && *str)
 				str++;
diff --git a/mm/Kconfig b/mm/Kconfig
index edd300aca173..fd3386242cf0 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -67,7 +67,7 @@ config DISCONTIGMEM
 
 config SPARSEMEM
 	def_bool y
-	depends on SPARSEMEM_MANUAL
+	depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL
 
 config FLATMEM
 	def_bool y
@@ -129,7 +129,7 @@ config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
 	depends on SPARSEMEM || X86_64_ACPI_NUMA
 	depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG
-	depends on (IA64 || X86 || PPC64 || SUPERH || S390)
+	depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390)
 
 comment "Memory hotplug is currently incompatible with Software Suspend"
 	depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390
@@ -224,7 +224,9 @@ config KSM
 	  the many instances by a single resident page with that content, so
 	  saving memory until one or another app needs to modify the content.
 	  Recommended for use with KVM, or with other duplicative applications.
-	  See Documentation/vm/ksm.txt for more information.
+	  See Documentation/vm/ksm.txt for more information: KSM is inactive
+	  until a program has madvised that an area is MADV_MERGEABLE, and
+	  root has set /sys/kernel/mm/ksm/run to 1 (if CONFIG_SYSFS is set).
 
 config DEFAULT_MMAP_MIN_ADDR
         int "Low address space to protect from user allocation"
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 3d3accb1f800..1065b715ef64 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -92,7 +92,7 @@ static int bdi_debug_stats_show(struct seq_file *m, void *v)
 		   "BdiDirtyThresh:   %8lu kB\n"
 		   "DirtyThresh:      %8lu kB\n"
 		   "BackgroundThresh: %8lu kB\n"
-		   "WriteBack threads:%8lu\n"
+		   "WritebackThreads: %8lu\n"
 		   "b_dirty:          %8lu\n"
 		   "b_io:             %8lu\n"
 		   "b_more_io:        %8lu\n"
@@ -610,6 +610,21 @@ static void bdi_wb_shutdown(struct backing_dev_info *bdi)
 		kthread_stop(wb->task);
 }
 
+/*
+ * This bdi is going away now, make sure that no super_blocks point to it
+ */
+static void bdi_prune_sb(struct backing_dev_info *bdi)
+{
+	struct super_block *sb;
+
+	spin_lock(&sb_lock);
+	list_for_each_entry(sb, &super_blocks, s_list) {
+		if (sb->s_bdi == bdi)
+			sb->s_bdi = NULL;
+	}
+	spin_unlock(&sb_lock);
+}
+
 void bdi_unregister(struct backing_dev_info *bdi)
 {
 	if (bdi->dev) {
@@ -682,6 +697,7 @@ void bdi_destroy(struct backing_dev_info *bdi)
 		spin_unlock(&inode_lock);
 	}
 
+	bdi_prune_sb(bdi);
 	bdi_unregister(bdi);
 
 	for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 4ea4510e2996..8bf765c4f58d 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -833,12 +833,15 @@ static void early_alloc(struct early_log *log)
 	 */
 	rcu_read_lock();
 	object = create_object((unsigned long)log->ptr, log->size,
-			       log->min_count, GFP_KERNEL);
+			       log->min_count, GFP_ATOMIC);
+	if (!object)
+		goto out;
 	spin_lock_irqsave(&object->lock, flags);
 	for (i = 0; i < log->trace_len; i++)
 		object->trace[i] = log->trace[i];
 	object->trace_len = log->trace_len;
 	spin_unlock_irqrestore(&object->lock, flags);
+out:
 	rcu_read_unlock();
 }
 
diff --git a/mm/ksm.c b/mm/ksm.c
index f7edac356f46..bef1af4f77e3 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -184,11 +184,6 @@ static DEFINE_SPINLOCK(ksm_mmlist_lock);
 		sizeof(struct __struct), __alignof__(struct __struct),\
 		(__flags), NULL)
 
-static void __init ksm_init_max_kernel_pages(void)
-{
-	ksm_max_kernel_pages = nr_free_buffer_pages() / 4;
-}
-
 static int __init ksm_slab_init(void)
 {
 	rmap_item_cache = KSM_KMEM_CACHE(rmap_item, 0);
@@ -1673,7 +1668,7 @@ static int __init ksm_init(void)
 	struct task_struct *ksm_thread;
 	int err;
 
-	ksm_init_max_kernel_pages();
+	ksm_max_kernel_pages = totalram_pages / 4;
 
 	err = ksm_slab_init();
 	if (err)
@@ -1697,6 +1692,9 @@ static int __init ksm_init(void)
 		kthread_stop(ksm_thread);
 		goto out_free2;
 	}
+#else
+	ksm_run = KSM_RUN_MERGE;	/* no way for user to start it */
+
 #endif /* CONFIG_SYSFS */
 
 	return 0;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e2b98a6875c0..f99f5991d6bb 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -313,7 +313,8 @@ soft_limit_tree_from_page(struct page *page)
 static void
 __mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
 				struct mem_cgroup_per_zone *mz,
-				struct mem_cgroup_tree_per_zone *mctz)
+				struct mem_cgroup_tree_per_zone *mctz,
+				unsigned long long new_usage_in_excess)
 {
 	struct rb_node **p = &mctz->rb_root.rb_node;
 	struct rb_node *parent = NULL;
@@ -322,7 +323,9 @@ __mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
 	if (mz->on_tree)
 		return;
 
-	mz->usage_in_excess = res_counter_soft_limit_excess(&mem->res);
+	mz->usage_in_excess = new_usage_in_excess;
+	if (!mz->usage_in_excess)
+		return;
 	while (*p) {
 		parent = *p;
 		mz_node = rb_entry(parent, struct mem_cgroup_per_zone,
@@ -353,16 +356,6 @@ __mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
 }
 
 static void
-mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
-				struct mem_cgroup_per_zone *mz,
-				struct mem_cgroup_tree_per_zone *mctz)
-{
-	spin_lock(&mctz->lock);
-	__mem_cgroup_insert_exceeded(mem, mz, mctz);
-	spin_unlock(&mctz->lock);
-}
-
-static void
 mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
 				struct mem_cgroup_per_zone *mz,
 				struct mem_cgroup_tree_per_zone *mctz)
@@ -392,34 +385,36 @@ static bool mem_cgroup_soft_limit_check(struct mem_cgroup *mem)
 
 static void mem_cgroup_update_tree(struct mem_cgroup *mem, struct page *page)
 {
-	unsigned long long prev_usage_in_excess, new_usage_in_excess;
-	bool updated_tree = false;
+	unsigned long long excess;
 	struct mem_cgroup_per_zone *mz;
 	struct mem_cgroup_tree_per_zone *mctz;
-
-	mz = mem_cgroup_zoneinfo(mem, page_to_nid(page), page_zonenum(page));
+	int nid = page_to_nid(page);
+	int zid = page_zonenum(page);
 	mctz = soft_limit_tree_from_page(page);
 
 	/*
-	 * We do updates in lazy mode, mem's are removed
-	 * lazily from the per-zone, per-node rb tree
+	 * Necessary to update all ancestors when hierarchy is used.
+	 * because their event counter is not touched.
 	 */
-	prev_usage_in_excess = mz->usage_in_excess;
-
-	new_usage_in_excess = res_counter_soft_limit_excess(&mem->res);
-	if (prev_usage_in_excess) {
-		mem_cgroup_remove_exceeded(mem, mz, mctz);
-		updated_tree = true;
-	}
-	if (!new_usage_in_excess)
-		goto done;
-	mem_cgroup_insert_exceeded(mem, mz, mctz);
-
-done:
-	if (updated_tree) {
-		spin_lock(&mctz->lock);
-		mz->usage_in_excess = new_usage_in_excess;
-		spin_unlock(&mctz->lock);
+	for (; mem; mem = parent_mem_cgroup(mem)) {
+		mz = mem_cgroup_zoneinfo(mem, nid, zid);
+		excess = res_counter_soft_limit_excess(&mem->res);
+		/*
+		 * We have to update the tree if mz is on RB-tree or
+		 * mem is over its softlimit.
+		 */
+		if (excess || mz->on_tree) {
+			spin_lock(&mctz->lock);
+			/* if on-tree, remove it */
+			if (mz->on_tree)
+				__mem_cgroup_remove_exceeded(mem, mz, mctz);
+			/*
+			 * Insert again. mz->usage_in_excess will be updated.
+			 * If excess is 0, no tree ops.
+			 */
+			__mem_cgroup_insert_exceeded(mem, mz, mctz, excess);
+			spin_unlock(&mctz->lock);
+		}
 	}
 }
 
@@ -447,9 +442,10 @@ static struct mem_cgroup_per_zone *
 __mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
 {
 	struct rb_node *rightmost = NULL;
-	struct mem_cgroup_per_zone *mz = NULL;
+	struct mem_cgroup_per_zone *mz;
 
 retry:
+	mz = NULL;
 	rightmost = rb_last(&mctz->rb_root);
 	if (!rightmost)
 		goto done;		/* Nothing to reclaim from */
@@ -1270,9 +1266,9 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm,
 			gfp_t gfp_mask, struct mem_cgroup **memcg,
 			bool oom, struct page *page)
 {
-	struct mem_cgroup *mem, *mem_over_limit, *mem_over_soft_limit;
+	struct mem_cgroup *mem, *mem_over_limit;
 	int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
-	struct res_counter *fail_res, *soft_fail_res = NULL;
+	struct res_counter *fail_res;
 
 	if (unlikely(test_thread_flag(TIF_MEMDIE))) {
 		/* Don't account this! */
@@ -1304,17 +1300,16 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm,
 
 		if (mem_cgroup_is_root(mem))
 			goto done;
-		ret = res_counter_charge(&mem->res, PAGE_SIZE, &fail_res,
-						&soft_fail_res);
+		ret = res_counter_charge(&mem->res, PAGE_SIZE, &fail_res);
 		if (likely(!ret)) {
 			if (!do_swap_account)
 				break;
 			ret = res_counter_charge(&mem->memsw, PAGE_SIZE,
-							&fail_res, NULL);
+							&fail_res);
 			if (likely(!ret))
 				break;
 			/* mem+swap counter fails */
-			res_counter_uncharge(&mem->res, PAGE_SIZE, NULL);
+			res_counter_uncharge(&mem->res, PAGE_SIZE);
 			flags |= MEM_CGROUP_RECLAIM_NOSWAP;
 			mem_over_limit = mem_cgroup_from_res_counter(fail_res,
 									memsw);
@@ -1353,16 +1348,11 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm,
 		}
 	}
 	/*
-	 * Insert just the ancestor, we should trickle down to the correct
-	 * cgroup for reclaim, since the other nodes will be below their
-	 * soft limit
+	 * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
+	 * if they exceeds softlimit.
 	 */
-	if (soft_fail_res) {
-		mem_over_soft_limit =
-			mem_cgroup_from_res_counter(soft_fail_res, res);
-		if (mem_cgroup_soft_limit_check(mem_over_soft_limit))
-			mem_cgroup_update_tree(mem_over_soft_limit, page);
-	}
+	if (mem_cgroup_soft_limit_check(mem))
+		mem_cgroup_update_tree(mem, page);
 done:
 	return 0;
 nomem:
@@ -1437,10 +1427,9 @@ static void __mem_cgroup_commit_charge(struct mem_cgroup *mem,
 	if (unlikely(PageCgroupUsed(pc))) {
 		unlock_page_cgroup(pc);
 		if (!mem_cgroup_is_root(mem)) {
-			res_counter_uncharge(&mem->res, PAGE_SIZE, NULL);
+			res_counter_uncharge(&mem->res, PAGE_SIZE);
 			if (do_swap_account)
-				res_counter_uncharge(&mem->memsw, PAGE_SIZE,
-							NULL);
+				res_counter_uncharge(&mem->memsw, PAGE_SIZE);
 		}
 		css_put(&mem->css);
 		return;
@@ -1519,7 +1508,7 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
 		goto out;
 
 	if (!mem_cgroup_is_root(from))
-		res_counter_uncharge(&from->res, PAGE_SIZE, NULL);
+		res_counter_uncharge(&from->res, PAGE_SIZE);
 	mem_cgroup_charge_statistics(from, pc, false);
 
 	page = pc->page;
@@ -1539,7 +1528,7 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
 	}
 
 	if (do_swap_account && !mem_cgroup_is_root(from))
-		res_counter_uncharge(&from->memsw, PAGE_SIZE, NULL);
+		res_counter_uncharge(&from->memsw, PAGE_SIZE);
 	css_put(&from->css);
 
 	css_get(&to->css);
@@ -1610,9 +1599,9 @@ uncharge:
 	css_put(&parent->css);
 	/* uncharge if move fails */
 	if (!mem_cgroup_is_root(parent)) {
-		res_counter_uncharge(&parent->res, PAGE_SIZE, NULL);
+		res_counter_uncharge(&parent->res, PAGE_SIZE);
 		if (do_swap_account)
-			res_counter_uncharge(&parent->memsw, PAGE_SIZE, NULL);
+			res_counter_uncharge(&parent->memsw, PAGE_SIZE);
 	}
 	return ret;
 }
@@ -1803,8 +1792,7 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
 			 * calling css_tryget
 			 */
 			if (!mem_cgroup_is_root(memcg))
-				res_counter_uncharge(&memcg->memsw, PAGE_SIZE,
-							NULL);
+				res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
 			mem_cgroup_swap_statistics(memcg, false);
 			mem_cgroup_put(memcg);
 		}
@@ -1831,9 +1819,9 @@ void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *mem)
 	if (!mem)
 		return;
 	if (!mem_cgroup_is_root(mem)) {
-		res_counter_uncharge(&mem->res, PAGE_SIZE, NULL);
+		res_counter_uncharge(&mem->res, PAGE_SIZE);
 		if (do_swap_account)
-			res_counter_uncharge(&mem->memsw, PAGE_SIZE, NULL);
+			res_counter_uncharge(&mem->memsw, PAGE_SIZE);
 	}
 	css_put(&mem->css);
 }
@@ -1848,7 +1836,6 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
 	struct page_cgroup *pc;
 	struct mem_cgroup *mem = NULL;
 	struct mem_cgroup_per_zone *mz;
-	bool soft_limit_excess = false;
 
 	if (mem_cgroup_disabled())
 		return NULL;
@@ -1888,10 +1875,10 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
 	}
 
 	if (!mem_cgroup_is_root(mem)) {
-		res_counter_uncharge(&mem->res, PAGE_SIZE, &soft_limit_excess);
+		res_counter_uncharge(&mem->res, PAGE_SIZE);
 		if (do_swap_account &&
 				(ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT))
-			res_counter_uncharge(&mem->memsw, PAGE_SIZE, NULL);
+			res_counter_uncharge(&mem->memsw, PAGE_SIZE);
 	}
 	if (ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
 		mem_cgroup_swap_statistics(mem, true);
@@ -1908,7 +1895,7 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
 	mz = page_cgroup_zoneinfo(pc);
 	unlock_page_cgroup(pc);
 
-	if (soft_limit_excess && mem_cgroup_soft_limit_check(mem))
+	if (mem_cgroup_soft_limit_check(mem))
 		mem_cgroup_update_tree(mem, page);
 	/* at swapout, this memcg will be accessed to record to swap */
 	if (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
@@ -1986,7 +1973,7 @@ void mem_cgroup_uncharge_swap(swp_entry_t ent)
 		 * This memcg can be obsolete one. We avoid calling css_tryget
 		 */
 		if (!mem_cgroup_is_root(memcg))
-			res_counter_uncharge(&memcg->memsw, PAGE_SIZE, NULL);
+			res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
 		mem_cgroup_swap_statistics(memcg, false);
 		mem_cgroup_put(memcg);
 	}
@@ -2233,6 +2220,7 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
 	unsigned long reclaimed;
 	int loop = 0;
 	struct mem_cgroup_tree_per_zone *mctz;
+	unsigned long long excess;
 
 	if (order > 0)
 		return 0;
@@ -2284,9 +2272,8 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
 					break;
 			} while (1);
 		}
-		mz->usage_in_excess =
-			res_counter_soft_limit_excess(&mz->mem->res);
 		__mem_cgroup_remove_exceeded(mz->mem, mz, mctz);
+		excess = res_counter_soft_limit_excess(&mz->mem->res);
 		/*
 		 * One school of thought says that we should not add
 		 * back the node to the tree if reclaim returns 0.
@@ -2295,8 +2282,8 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
 		 * memory to reclaim from. Consider this as a longer
 		 * term TODO.
 		 */
-		if (mz->usage_in_excess)
-			__mem_cgroup_insert_exceeded(mz->mem, mz, mctz);
+		/* If excess == 0, no tree ops */
+		__mem_cgroup_insert_exceeded(mz->mem, mz, mctz, excess);
 		spin_unlock(&mctz->lock);
 		css_put(&mz->mem->css);
 		loop++;
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 729d4b15b645..dacc64183874 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -35,6 +35,7 @@
 #include <linux/mm.h>
 #include <linux/page-flags.h>
 #include <linux/sched.h>
+#include <linux/ksm.h>
 #include <linux/rmap.h>
 #include <linux/pagemap.h>
 #include <linux/swap.h>
@@ -370,9 +371,6 @@ static int me_pagecache_clean(struct page *p, unsigned long pfn)
 	int ret = FAILED;
 	struct address_space *mapping;
 
-	if (!isolate_lru_page(p))
-		page_cache_release(p);
-
 	/*
 	 * For anonymous pages we're done the only reference left
 	 * should be the one m_f() holds.
@@ -498,30 +496,18 @@ static int me_pagecache_dirty(struct page *p, unsigned long pfn)
  */
 static int me_swapcache_dirty(struct page *p, unsigned long pfn)
 {
-	int ret = FAILED;
-
 	ClearPageDirty(p);
 	/* Trigger EIO in shmem: */
 	ClearPageUptodate(p);
 
-	if (!isolate_lru_page(p)) {
-		page_cache_release(p);
-		ret = DELAYED;
-	}
-
-	return ret;
+	return DELAYED;
 }
 
 static int me_swapcache_clean(struct page *p, unsigned long pfn)
 {
-	int ret = FAILED;
-
-	if (!isolate_lru_page(p)) {
-		page_cache_release(p);
-		ret = RECOVERED;
-	}
 	delete_from_swap_cache(p);
-	return ret;
+
+	return RECOVERED;
 }
 
 /*
@@ -611,8 +597,6 @@ static struct page_state {
 	{ 0,		0,		"unknown page state",	me_unknown },
 };
 
-#undef lru
-
 static void action_result(unsigned long pfn, char *msg, int result)
 {
 	struct page *page = NULL;
@@ -629,13 +613,16 @@ static int page_action(struct page_state *ps, struct page *p,
 			unsigned long pfn, int ref)
 {
 	int result;
+	int count;
 
 	result = ps->action(p, pfn);
 	action_result(pfn, ps->msg, result);
-	if (page_count(p) != 1 + ref)
+
+	count = page_count(p) - 1 - ref;
+	if (count != 0)
 		printk(KERN_ERR
 		       "MCE %#lx: %s page still referenced by %d users\n",
-		       pfn, ps->msg, page_count(p) - 1);
+		       pfn, ps->msg, count);
 
 	/* Could do more checks here if page looks ok */
 	/*
@@ -661,12 +648,9 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn,
 	int i;
 	int kill = 1;
 
-	if (PageReserved(p) || PageCompound(p) || PageSlab(p))
+	if (PageReserved(p) || PageCompound(p) || PageSlab(p) || PageKsm(p))
 		return;
 
-	if (!PageLRU(p))
-		lru_add_drain_all();
-
 	/*
 	 * This check implies we don't kill processes if their pages
 	 * are in the swap cache early. Those are always late kills.
@@ -738,6 +722,7 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn,
 
 int __memory_failure(unsigned long pfn, int trapno, int ref)
 {
+	unsigned long lru_flag;
 	struct page_state *ps;
 	struct page *p;
 	int res;
@@ -775,6 +760,24 @@ int __memory_failure(unsigned long pfn, int trapno, int ref)
 	}
 
 	/*
+	 * We ignore non-LRU pages for good reasons.
+	 * - PG_locked is only well defined for LRU pages and a few others
+	 * - to avoid races with __set_page_locked()
+	 * - to avoid races with __SetPageSlab*() (and more non-atomic ops)
+	 * The check (unnecessarily) ignores LRU pages being isolated and
+	 * walked by the page reclaim code, however that's not a big loss.
+	 */
+	if (!PageLRU(p))
+		lru_add_drain_all();
+	lru_flag = p->flags & lru;
+	if (isolate_lru_page(p)) {
+		action_result(pfn, "non LRU", IGNORED);
+		put_page(p);
+		return -EBUSY;
+	}
+	page_cache_release(p);
+
+	/*
 	 * Lock the page and wait for writeback to finish.
 	 * It's very difficult to mess with pages currently under IO
 	 * and in many cases impossible, so we just avoid it here.
@@ -790,7 +793,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref)
 	/*
 	 * Torn down by someone else?
 	 */
-	if (PageLRU(p) && !PageSwapCache(p) && p->mapping == NULL) {
+	if ((lru_flag & lru) && !PageSwapCache(p) && p->mapping == NULL) {
 		action_result(pfn, "already truncated LRU", IGNORED);
 		res = 0;
 		goto out;
@@ -798,7 +801,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref)
 
 	res = -EBUSY;
 	for (ps = error_states;; ps++) {
-		if ((p->flags & ps->mask) == ps->res) {
+		if (((p->flags | lru_flag)& ps->mask) == ps->res) {
 			res = page_action(ps, p, pfn, ref);
 			break;
 		}
diff --git a/mm/memory.c b/mm/memory.c
index 7e91b5f9f690..6ab19dd4a199 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -641,6 +641,7 @@ static int copy_pte_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 		pmd_t *dst_pmd, pmd_t *src_pmd, struct vm_area_struct *vma,
 		unsigned long addr, unsigned long end)
 {
+	pte_t *orig_src_pte, *orig_dst_pte;
 	pte_t *src_pte, *dst_pte;
 	spinlock_t *src_ptl, *dst_ptl;
 	int progress = 0;
@@ -654,6 +655,8 @@ again:
 	src_pte = pte_offset_map_nested(src_pmd, addr);
 	src_ptl = pte_lockptr(src_mm, src_pmd);
 	spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
+	orig_src_pte = src_pte;
+	orig_dst_pte = dst_pte;
 	arch_enter_lazy_mmu_mode();
 
 	do {
@@ -677,9 +680,9 @@ again:
 
 	arch_leave_lazy_mmu_mode();
 	spin_unlock(src_ptl);
-	pte_unmap_nested(src_pte - 1);
+	pte_unmap_nested(orig_src_pte);
 	add_mm_rss(dst_mm, rss[0], rss[1]);
-	pte_unmap_unlock(dst_pte - 1, dst_ptl);
+	pte_unmap_unlock(orig_dst_pte, dst_ptl);
 	cond_resched();
 	if (addr != end)
 		goto again;
@@ -1820,10 +1823,10 @@ static int apply_to_pte_range(struct mm_struct *mm, pmd_t *pmd,
 	token = pmd_pgtable(*pmd);
 
 	do {
-		err = fn(pte, token, addr, data);
+		err = fn(pte++, token, addr, data);
 		if (err)
 			break;
-	} while (pte++, addr += PAGE_SIZE, addr != end);
+	} while (addr += PAGE_SIZE, addr != end);
 
 	arch_leave_lazy_mmu_mode();
 
@@ -2539,7 +2542,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	} else if (PageHWPoison(page)) {
 		ret = VM_FAULT_HWPOISON;
 		delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
-		goto out;
+		goto out_release;
 	}
 
 	lock_page(page);
@@ -2611,6 +2614,7 @@ out_nomap:
 	pte_unmap_unlock(page_table, ptl);
 out_page:
 	unlock_page(page);
+out_release:
 	page_cache_release(page);
 	return ret;
 }
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 7dd9d9f80694..4545d5944243 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1024,7 +1024,7 @@ static long do_mbind(unsigned long start, unsigned long len,
 
 		err = migrate_prep();
 		if (err)
-			return err;
+			goto mpol_out;
 	}
 	{
 		NODEMASK_SCRATCH(scratch);
@@ -1039,10 +1039,9 @@ static long do_mbind(unsigned long start, unsigned long len,
 			err = -ENOMEM;
 		NODEMASK_SCRATCH_FREE(scratch);
 	}
-	if (err) {
-		mpol_put(new);
-		return err;
-	}
+	if (err)
+		goto mpol_out;
+
 	vma = check_range(mm, start, end, nmask,
 			  flags | MPOL_MF_INVERT, &pagelist);
 
@@ -1058,9 +1057,11 @@ static long do_mbind(unsigned long start, unsigned long len,
 
 		if (!err && nr_failed && (flags & MPOL_MF_STRICT))
 			err = -EIO;
-	}
+	} else
+		putback_lru_pages(&pagelist);
 
 	up_write(&mm->mmap_sem);
+ mpol_out:
 	mpol_put(new);
 	return err;
 }
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index a3b14090b1fb..2c5d79236ead 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -566,7 +566,8 @@ static void balance_dirty_pages(struct address_space *mapping,
 		if (pages_written >= write_chunk)
 			break;		/* We've done our duty */
 
-		schedule_timeout_interruptible(pause);
+		__set_current_state(TASK_INTERRUPTIBLE);
+		io_schedule_timeout(pause);
 
 		/*
 		 * Increase the delay for each loop, up to our previous
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index bf720550b44d..cdcedf661616 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2183,7 +2183,7 @@ void show_free_areas(void)
 	printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n"
 		" active_file:%lu inactive_file:%lu isolated_file:%lu\n"
 		" unevictable:%lu"
-		" dirty:%lu writeback:%lu unstable:%lu buffer:%lu\n"
+		" dirty:%lu writeback:%lu unstable:%lu\n"
 		" free:%lu slab_reclaimable:%lu slab_unreclaimable:%lu\n"
 		" mapped:%lu shmem:%lu pagetables:%lu bounce:%lu\n",
 		global_page_state(NR_ACTIVE_ANON),
@@ -2196,7 +2196,6 @@ void show_free_areas(void)
 		global_page_state(NR_FILE_DIRTY),
 		global_page_state(NR_WRITEBACK),
 		global_page_state(NR_UNSTABLE_NFS),
-		nr_blockdev_pages(),
 		global_page_state(NR_FREE_PAGES),
 		global_page_state(NR_SLAB_RECLAIMABLE),
 		global_page_state(NR_SLAB_UNRECLAIMABLE),
diff --git a/mm/rmap.c b/mm/rmap.c
index 28aafe2b5306..dd43373a483f 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -242,8 +242,8 @@ vma_address(struct page *page, struct vm_area_struct *vma)
 }
 
 /*
- * At what user virtual address is page expected in vma? checking that the
- * page matches the vma: currently only used on anon pages, by unuse_vma;
+ * At what user virtual address is page expected in vma?
+ * checking that the page matches the vma.
  */
 unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
 {
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 4de7f02f820b..a1bc6b9af9a2 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1974,12 +1974,14 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
 		goto bad_swap;
 	}
 
-	if (blk_queue_nonrot(bdev_get_queue(p->bdev))) {
-		p->flags |= SWP_SOLIDSTATE;
-		p->cluster_next = 1 + (random32() % p->highest_bit);
+	if (p->bdev) {
+		if (blk_queue_nonrot(bdev_get_queue(p->bdev))) {
+			p->flags |= SWP_SOLIDSTATE;
+			p->cluster_next = 1 + (random32() % p->highest_bit);
+		}
+		if (discard_swap(p) == 0)
+			p->flags |= SWP_DISCARDABLE;
 	}
-	if (discard_swap(p) == 0)
-		p->flags |= SWP_DISCARDABLE;
 
 	mutex_lock(&swapon_mutex);
 	spin_lock(&swap_lock);
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 69511e663234..0f551a4a44cd 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/highmem.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
@@ -25,10 +26,10 @@
 #include <linux/rcupdate.h>
 #include <linux/pfn.h>
 #include <linux/kmemleak.h>
-#include <linux/highmem.h>
 #include <asm/atomic.h>
 #include <asm/uaccess.h>
 #include <asm/tlbflush.h>
+#include <asm/shmparam.h>
 
 
 /*** Page table manipulation functions ***/
@@ -1156,12 +1157,11 @@ static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
 }
 
 static struct vm_struct *__get_vm_area_node(unsigned long size,
-		unsigned long flags, unsigned long start, unsigned long end,
-		int node, gfp_t gfp_mask, void *caller)
+		unsigned long align, unsigned long flags, unsigned long start,
+		unsigned long end, int node, gfp_t gfp_mask, void *caller)
 {
 	static struct vmap_area *va;
 	struct vm_struct *area;
-	unsigned long align = 1;
 
 	BUG_ON(in_interrupt());
 	if (flags & VM_IOREMAP) {
@@ -1201,7 +1201,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
 struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
 				unsigned long start, unsigned long end)
 {
-	return __get_vm_area_node(size, flags, start, end, -1, GFP_KERNEL,
+	return __get_vm_area_node(size, 1, flags, start, end, -1, GFP_KERNEL,
 						__builtin_return_address(0));
 }
 EXPORT_SYMBOL_GPL(__get_vm_area);
@@ -1210,7 +1210,7 @@ struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags,
 				       unsigned long start, unsigned long end,
 				       void *caller)
 {
-	return __get_vm_area_node(size, flags, start, end, -1, GFP_KERNEL,
+	return __get_vm_area_node(size, 1, flags, start, end, -1, GFP_KERNEL,
 				  caller);
 }
 
@@ -1225,22 +1225,22 @@ struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags,
  */
 struct vm_struct *get_vm_area(unsigned long size, unsigned long flags)
 {
-	return __get_vm_area_node(size, flags, VMALLOC_START, VMALLOC_END,
+	return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
 				-1, GFP_KERNEL, __builtin_return_address(0));
 }
 
 struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
 				void *caller)
 {
-	return __get_vm_area_node(size, flags, VMALLOC_START, VMALLOC_END,
+	return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
 						-1, GFP_KERNEL, caller);
 }
 
 struct vm_struct *get_vm_area_node(unsigned long size, unsigned long flags,
 				   int node, gfp_t gfp_mask)
 {
-	return __get_vm_area_node(size, flags, VMALLOC_START, VMALLOC_END, node,
-				  gfp_mask, __builtin_return_address(0));
+	return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
+				  node, gfp_mask, __builtin_return_address(0));
 }
 
 static struct vm_struct *find_vm_area(const void *addr)
@@ -1403,7 +1403,8 @@ void *vmap(struct page **pages, unsigned int count,
 }
 EXPORT_SYMBOL(vmap);
 
-static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,
+static void *__vmalloc_node(unsigned long size, unsigned long align,
+			    gfp_t gfp_mask, pgprot_t prot,
 			    int node, void *caller);
 static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
 				 pgprot_t prot, int node, void *caller)
@@ -1417,7 +1418,7 @@ static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
 	area->nr_pages = nr_pages;
 	/* Please note that the recursion is strictly bounded. */
 	if (array_size > PAGE_SIZE) {
-		pages = __vmalloc_node(array_size, gfp_mask | __GFP_ZERO,
+		pages = __vmalloc_node(array_size, 1, gfp_mask | __GFP_ZERO,
 				PAGE_KERNEL, node, caller);
 		area->flags |= VM_VPAGES;
 	} else {
@@ -1476,6 +1477,7 @@ void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask, pgprot_t prot)
 /**
  *	__vmalloc_node  -  allocate virtually contiguous memory
  *	@size:		allocation size
+ *	@align:		desired alignment
  *	@gfp_mask:	flags for the page level allocator
  *	@prot:		protection mask for the allocated pages
  *	@node:		node to use for allocation or -1
@@ -1485,8 +1487,9 @@ void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask, pgprot_t prot)
  *	allocator with @gfp_mask flags.  Map them into contiguous
  *	kernel virtual space, using a pagetable protection of @prot.
  */
-static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,
-						int node, void *caller)
+static void *__vmalloc_node(unsigned long size, unsigned long align,
+			    gfp_t gfp_mask, pgprot_t prot,
+			    int node, void *caller)
 {
 	struct vm_struct *area;
 	void *addr;
@@ -1496,8 +1499,8 @@ static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,
 	if (!size || (size >> PAGE_SHIFT) > totalram_pages)
 		return NULL;
 
-	area = __get_vm_area_node(size, VM_ALLOC, VMALLOC_START, VMALLOC_END,
-						node, gfp_mask, caller);
+	area = __get_vm_area_node(size, align, VM_ALLOC, VMALLOC_START,
+				  VMALLOC_END, node, gfp_mask, caller);
 
 	if (!area)
 		return NULL;
@@ -1516,7 +1519,7 @@ static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,
 
 void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
 {
-	return __vmalloc_node(size, gfp_mask, prot, -1,
+	return __vmalloc_node(size, 1, gfp_mask, prot, -1,
 				__builtin_return_address(0));
 }
 EXPORT_SYMBOL(__vmalloc);
@@ -1532,7 +1535,7 @@ EXPORT_SYMBOL(__vmalloc);
  */
 void *vmalloc(unsigned long size)
 {
-	return __vmalloc_node(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL,
+	return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL,
 					-1, __builtin_return_address(0));
 }
 EXPORT_SYMBOL(vmalloc);
@@ -1549,7 +1552,8 @@ void *vmalloc_user(unsigned long size)
 	struct vm_struct *area;
 	void *ret;
 
-	ret = __vmalloc_node(size, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
+	ret = __vmalloc_node(size, SHMLBA,
+			     GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
 			     PAGE_KERNEL, -1, __builtin_return_address(0));
 	if (ret) {
 		area = find_vm_area(ret);
@@ -1572,7 +1576,7 @@ EXPORT_SYMBOL(vmalloc_user);
  */
 void *vmalloc_node(unsigned long size, int node)
 {
-	return __vmalloc_node(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL,
+	return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL,
 					node, __builtin_return_address(0));
 }
 EXPORT_SYMBOL(vmalloc_node);
@@ -1595,7 +1599,7 @@ EXPORT_SYMBOL(vmalloc_node);
 
 void *vmalloc_exec(unsigned long size)
 {
-	return __vmalloc_node(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC,
+	return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC,
 			      -1, __builtin_return_address(0));
 }
 
@@ -1616,7 +1620,7 @@ void *vmalloc_exec(unsigned long size)
  */
 void *vmalloc_32(unsigned long size)
 {
-	return __vmalloc_node(size, GFP_VMALLOC32, PAGE_KERNEL,
+	return __vmalloc_node(size, 1, GFP_VMALLOC32, PAGE_KERNEL,
 			      -1, __builtin_return_address(0));
 }
 EXPORT_SYMBOL(vmalloc_32);
@@ -1633,7 +1637,7 @@ void *vmalloc_32_user(unsigned long size)
 	struct vm_struct *area;
 	void *ret;
 
-	ret = __vmalloc_node(size, GFP_VMALLOC32 | __GFP_ZERO, PAGE_KERNEL,
+	ret = __vmalloc_node(size, 1, GFP_VMALLOC32 | __GFP_ZERO, PAGE_KERNEL,
 			     -1, __builtin_return_address(0));
 	if (ret) {
 		area = find_vm_area(ret);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 64e438898832..777af57fd8c8 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -544,6 +544,16 @@ redo:
 		 */
 		lru = LRU_UNEVICTABLE;
 		add_page_to_unevictable_list(page);
+		/*
+		 * When racing with an mlock clearing (page is
+		 * unlocked), make sure that if the other thread does
+		 * not observe our setting of PG_lru and fails
+		 * isolation, we see PG_mlocked cleared below and move
+		 * the page back to the evictable list.
+		 *
+		 * The other side is TestClearPageMlocked().
+		 */
+		smp_mb();
 	}
 
 	/*
@@ -1088,7 +1098,7 @@ static unsigned long shrink_inactive_list(unsigned long max_scan,
 	int lumpy_reclaim = 0;
 
 	while (unlikely(too_many_isolated(zone, file, sc))) {
-		congestion_wait(WRITE, HZ/10);
+		congestion_wait(BLK_RW_ASYNC, HZ/10);
 
 		/* We are about to die and free our memory. Return now. */
 		if (fatal_signal_pending(current))
@@ -1356,7 +1366,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
 			 * IO, plus JVM can create lots of anon VM_EXEC pages,
 			 * so we ignore them here.
 			 */
-			if ((vm_flags & VM_EXEC) && !PageAnon(page)) {
+			if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) {
 				list_add(&page->lru, &l_active);
 				continue;
 			}
diff --git a/net/8021q/vlan_netlink.c b/net/8021q/vlan_netlink.c
index 343146e1bceb..a91504850195 100644
--- a/net/8021q/vlan_netlink.c
+++ b/net/8021q/vlan_netlink.c
@@ -169,6 +169,7 @@ static size_t vlan_get_size(const struct net_device *dev)
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
 
 	return nla_total_size(2) +	/* IFLA_VLAN_ID */
+	       sizeof(struct ifla_vlan_flags) + /* IFLA_VLAN_FLAGS */
 	       vlan_qos_map_size(vlan->nr_ingress_mappings) +
 	       vlan_qos_map_size(vlan->nr_egress_mappings);
 }
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index b2e07f0dd298..ea1e3daabefe 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -43,7 +43,6 @@
 #include <net/9p/transport.h>
 #include <linux/scatterlist.h>
 #include <linux/virtio.h>
-#include <linux/virtio_ids.h>
 #include <linux/virtio_9p.h>
 
 #define VIRTQUEUE_NUM	128
diff --git a/net/atm/common.c b/net/atm/common.c
index 8c4d843eb17f..950bd16d2383 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -679,7 +679,7 @@ static int check_qos(const struct atm_qos *qos)
 }
 
 int vcc_setsockopt(struct socket *sock, int level, int optname,
-		   char __user *optval, int optlen)
+		   char __user *optval, unsigned int optlen)
 {
 	struct atm_vcc *vcc;
 	unsigned long value;
diff --git a/net/atm/common.h b/net/atm/common.h
index 92e2981f479f..f48a76b6cdf4 100644
--- a/net/atm/common.h
+++ b/net/atm/common.h
@@ -21,7 +21,7 @@ unsigned int vcc_poll(struct file *file, struct socket *sock, poll_table *wait);
 int vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
 int vcc_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
 int vcc_setsockopt(struct socket *sock, int level, int optname,
-		   char __user *optval, int optlen);
+		   char __user *optval, unsigned int optlen);
 int vcc_getsockopt(struct socket *sock, int level, int optname,
 		   char __user *optval, int __user *optlen);
 
diff --git a/net/atm/pvc.c b/net/atm/pvc.c
index e1d22d9430dd..d4c024504f99 100644
--- a/net/atm/pvc.c
+++ b/net/atm/pvc.c
@@ -59,7 +59,7 @@ static int pvc_connect(struct socket *sock,struct sockaddr *sockaddr,
 }
 
 static int pvc_setsockopt(struct socket *sock, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	int error;
diff --git a/net/atm/svc.c b/net/atm/svc.c
index 7b831b526d0b..f90d143c4b25 100644
--- a/net/atm/svc.c
+++ b/net/atm/svc.c
@@ -446,7 +446,7 @@ int svc_change_qos(struct atm_vcc *vcc,struct atm_qos *qos)
 
 
 static int svc_setsockopt(struct socket *sock, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct atm_vcc *vcc = ATM_SD(sock);
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index fbcac76fdc0d..f45460730371 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -534,7 +534,7 @@ ax25_cb *ax25_create_cb(void)
  */
 
 static int ax25_setsockopt(struct socket *sock, int level, int optname,
-	char __user *optval, int optlen)
+	char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	ax25_cb *ax25;
@@ -641,15 +641,10 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
 
 	case SO_BINDTODEVICE:
 		if (optlen > IFNAMSIZ)
-			optlen=IFNAMSIZ;
-		if (copy_from_user(devname, optval, optlen)) {
-		res = -EFAULT;
-			break;
-		}
+			optlen = IFNAMSIZ;
 
-		dev = dev_get_by_name(&init_net, devname);
-		if (dev == NULL) {
-			res = -ENODEV;
+		if (copy_from_user(devname, optval, optlen)) {
+			res = -EFAULT;
 			break;
 		}
 
@@ -657,12 +652,18 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
 		   (sock->state != SS_UNCONNECTED ||
 		    sk->sk_state == TCP_LISTEN)) {
 			res = -EADDRNOTAVAIL;
-			dev_put(dev);
+			break;
+		}
+
+		dev = dev_get_by_name(&init_net, devname);
+		if (!dev) {
+			res = -ENODEV;
 			break;
 		}
 
 		ax25->ax25_dev = ax25_dev_ax25dev(dev);
 		ax25_fillin_cb(ax25, ax25->ax25_dev);
+		dev_put(dev);
 		break;
 
 	default:
@@ -900,7 +901,6 @@ struct sock *ax25_make_new(struct sock *osk, struct ax25_dev *ax25_dev)
 
 	sock_init_data(NULL, sk);
 
-	sk->sk_destruct = ax25_free_sock;
 	sk->sk_type     = osk->sk_type;
 	sk->sk_priority = osk->sk_priority;
 	sk->sk_protocol = osk->sk_protocol;
@@ -938,6 +938,7 @@ struct sock *ax25_make_new(struct sock *osk, struct ax25_dev *ax25_dev)
 	}
 
 	sk->sk_protinfo = ax25;
+	sk->sk_destruct = ax25_free_sock;
 	ax25->sk    = sk;
 
 	return sk;
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 4f9621f759a0..75302a986067 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -466,7 +466,7 @@ drop:
 	goto done;
 }
 
-static int hci_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int len)
+static int hci_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int len)
 {
 	struct hci_ufilter uf = { .opcode = 0 };
 	struct sock *sk = sock->sk;
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 7f939ce29801..2bc6f6a8de68 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -92,6 +92,8 @@ static void add_conn(struct work_struct *work)
 
 	dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
 
+	dev_set_drvdata(&conn->dev, conn);
+
 	if (device_add(&conn->dev) < 0) {
 		BT_ERR("Failed to register connection device");
 		return;
@@ -144,8 +146,6 @@ void hci_conn_init_sysfs(struct hci_conn *conn)
 	conn->dev.class = bt_class;
 	conn->dev.parent = &hdev->dev;
 
-	dev_set_drvdata(&conn->dev, conn);
-
 	device_initialize(&conn->dev);
 
 	INIT_WORK(&conn->work_add, add_conn);
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index b03012564647..77e9fb130adb 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -555,12 +555,12 @@ static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon, u8 status)
 
 	conn->feat_mask = 0;
 
-	setup_timer(&conn->info_timer, l2cap_info_timeout,
-						(unsigned long) conn);
-
 	spin_lock_init(&conn->lock);
 	rwlock_init(&conn->chan_list.lock);
 
+	setup_timer(&conn->info_timer, l2cap_info_timeout,
+						(unsigned long) conn);
+
 	conn->disc_reason = 0x13;
 
 	return conn;
@@ -783,6 +783,9 @@ static void l2cap_sock_init(struct sock *sk, struct sock *parent)
 	/* Default config options */
 	pi->conf_len = 0;
 	pi->flush_to = L2CAP_DEFAULT_FLUSH_TO;
+	skb_queue_head_init(TX_QUEUE(sk));
+	skb_queue_head_init(SREJ_QUEUE(sk));
+	INIT_LIST_HEAD(SREJ_LIST(sk));
 }
 
 static struct proto l2cap_proto = {
@@ -1698,7 +1701,7 @@ static int l2cap_sock_recvmsg(struct kiocb *iocb, struct socket *sock, struct ms
 	return bt_sock_recvmsg(iocb, sock, msg, len, flags);
 }
 
-static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, int optlen)
+static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct l2cap_options opts;
@@ -1755,7 +1758,7 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __us
 	return err;
 }
 
-static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct bt_security sec;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 0b85e8116859..8a20aaf1f231 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -730,7 +730,7 @@ out:
 	return copied ? : err;
 }
 
-static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, int optlen)
+static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	int err = 0;
@@ -766,7 +766,7 @@ static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __u
 	return err;
 }
 
-static int rfcomm_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+static int rfcomm_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct bt_security sec;
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 13c27f17192c..77f4153bdb5e 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -644,7 +644,7 @@ static int sco_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	return err;
 }
 
-static int sco_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+static int sco_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	int err = 0;
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 142ebac14176..b1b3b0fbf41c 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -432,6 +432,7 @@ err2:
 	br_fdb_delete_by_port(br, p, 1);
 err1:
 	kobject_put(&p->kobj);
+	p = NULL; /* kobject_put frees */
 err0:
 	dev_set_promiscuity(dev, -1);
 put_back:
diff --git a/net/can/raw.c b/net/can/raw.c
index db3152df7d2b..b5e897922d32 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -411,7 +411,7 @@ static int raw_getname(struct socket *sock, struct sockaddr *uaddr,
 }
 
 static int raw_setsockopt(struct socket *sock, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct raw_sock *ro = raw_sk(sk);
diff --git a/net/compat.c b/net/compat.c
index 12728b17a226..a407c3addbae 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -331,7 +331,7 @@ struct compat_sock_fprog {
 };
 
 static int do_set_attach_filter(struct socket *sock, int level, int optname,
-				char __user *optval, int optlen)
+				char __user *optval, unsigned int optlen)
 {
 	struct compat_sock_fprog __user *fprog32 = (struct compat_sock_fprog __user *)optval;
 	struct sock_fprog __user *kfprog = compat_alloc_user_space(sizeof(struct sock_fprog));
@@ -351,7 +351,7 @@ static int do_set_attach_filter(struct socket *sock, int level, int optname,
 }
 
 static int do_set_sock_timeout(struct socket *sock, int level,
-		int optname, char __user *optval, int optlen)
+		int optname, char __user *optval, unsigned int optlen)
 {
 	struct compat_timeval __user *up = (struct compat_timeval __user *) optval;
 	struct timeval ktime;
@@ -373,7 +373,7 @@ static int do_set_sock_timeout(struct socket *sock, int level,
 }
 
 static int compat_sock_setsockopt(struct socket *sock, int level, int optname,
-				char __user *optval, int optlen)
+				char __user *optval, unsigned int optlen)
 {
 	if (optname == SO_ATTACH_FILTER)
 		return do_set_attach_filter(sock, level, optname,
@@ -385,7 +385,7 @@ static int compat_sock_setsockopt(struct socket *sock, int level, int optname,
 }
 
 asmlinkage long compat_sys_setsockopt(int fd, int level, int optname,
-				char __user *optval, int optlen)
+				char __user *optval, unsigned int optlen)
 {
 	int err;
 	struct socket *sock;
@@ -558,8 +558,8 @@ struct compat_group_filter {
 
 
 int compat_mc_setsockopt(struct sock *sock, int level, int optname,
-	char __user *optval, int optlen,
-	int (*setsockopt)(struct sock *,int,int,char __user *,int))
+	char __user *optval, unsigned int optlen,
+	int (*setsockopt)(struct sock *,int,int,char __user *,unsigned int))
 {
 	char __user	*koptval = optval;
 	int		koptlen = optlen;
diff --git a/net/core/dev.c b/net/core/dev.c
index 560c8c9c03ab..b8f74cfb1bfd 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2288,6 +2288,9 @@ int netif_receive_skb(struct sk_buff *skb)
 	int ret = NET_RX_DROP;
 	__be16 type;
 
+	if (!skb->tstamp.tv64)
+		net_timestamp(skb);
+
 	if (skb->vlan_tci && vlan_hwaccel_do_receive(skb))
 		return NET_RX_SUCCESS;
 
@@ -2295,9 +2298,6 @@ int netif_receive_skb(struct sk_buff *skb)
 	if (netpoll_receive_skb(skb))
 		return NET_RX_DROP;
 
-	if (!skb->tstamp.tv64)
-		net_timestamp(skb);
-
 	if (!skb->iif)
 		skb->iif = skb->dev->ifindex;
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 7d4c57523b09..427ded841224 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -16,7 +16,7 @@
 #include <net/sock.h>
 #include <linux/rtnetlink.h>
 #include <linux/wireless.h>
-#include <net/iw_handler.h>
+#include <net/wext.h>
 
 #include "net-sysfs.h"
 
@@ -363,18 +363,16 @@ static ssize_t wireless_show(struct device *d, char *buf,
 					       char *))
 {
 	struct net_device *dev = to_net_dev(d);
-	const struct iw_statistics *iw = NULL;
+	const struct iw_statistics *iw;
 	ssize_t ret = -EINVAL;
 
-	read_lock(&dev_base_lock);
+	rtnl_lock();
 	if (dev_isalive(dev)) {
-		if (dev->wireless_handlers &&
-		    dev->wireless_handlers->get_wireless_stats)
-			iw = dev->wireless_handlers->get_wireless_stats(dev);
-		if (iw != NULL)
+		iw = get_wireless_stats(dev);
+		if (iw)
 			ret = (*format)(iw, buf);
 	}
-	read_unlock(&dev_base_lock);
+	rtnl_unlock();
 
 	return ret;
 }
@@ -505,7 +503,7 @@ int netdev_register_kobject(struct net_device *net)
 	*groups++ = &netstat_group;
 
 #ifdef CONFIG_WIRELESS_EXT_SYSFS
-	if (net->wireless_handlers && net->wireless_handlers->get_wireless_stats)
+	if (net->wireless_handlers || net->ieee80211_ptr)
 		*groups++ = &wireless_group;
 #endif
 #endif /* CONFIG_SYSFS */
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 4d11c28ca8ca..86acdba0a97d 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -964,7 +964,7 @@ static ssize_t pktgen_if_write(struct file *file,
 		if (value == 0x7FFFFFFF)
 			pkt_dev->delay = ULLONG_MAX;
 		else
-			pkt_dev->delay = (u64)value * NSEC_PER_USEC;
+			pkt_dev->delay = (u64)value;
 
 		sprintf(pg_result, "OK: delay=%llu",
 			(unsigned long long) pkt_dev->delay);
@@ -2105,15 +2105,17 @@ static void pktgen_setup_inject(struct pktgen_dev *pkt_dev)
 static void spin(struct pktgen_dev *pkt_dev, ktime_t spin_until)
 {
 	ktime_t start_time, end_time;
-	s32 remaining;
+	s64 remaining;
 	struct hrtimer_sleeper t;
 
 	hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
 	hrtimer_set_expires(&t.timer, spin_until);
 
 	remaining = ktime_to_us(hrtimer_expires_remaining(&t.timer));
-	if (remaining <= 0)
+	if (remaining <= 0) {
+		pkt_dev->next_tx = ktime_add_ns(spin_until, pkt_dev->delay);
 		return;
+	}
 
 	start_time = ktime_now();
 	if (remaining < 100)
@@ -2210,7 +2212,7 @@ static void set_cur_queue_map(struct pktgen_dev *pkt_dev)
 	if (pkt_dev->flags & F_QUEUE_MAP_CPU)
 		pkt_dev->cur_queue_map = smp_processor_id();
 
-	else if (pkt_dev->queue_map_min < pkt_dev->queue_map_max) {
+	else if (pkt_dev->queue_map_min <= pkt_dev->queue_map_max) {
 		__u16 t;
 		if (pkt_dev->flags & F_QUEUE_MAP_RND) {
 			t = random32() %
diff --git a/net/core/sock.c b/net/core/sock.c
index 524712a7b154..7626b6aacd68 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -446,7 +446,7 @@ static inline void sock_valbool_flag(struct sock *sk, int bit, int valbool)
  */
 
 int sock_setsockopt(struct socket *sock, int level, int optname,
-		    char __user *optval, int optlen)
+		    char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	int val;
@@ -1228,17 +1228,22 @@ void __init sk_init(void)
 void sock_wfree(struct sk_buff *skb)
 {
 	struct sock *sk = skb->sk;
-	int res;
+	unsigned int len = skb->truesize;
 
-	/* In case it might be waiting for more memory. */
-	res = atomic_sub_return(skb->truesize, &sk->sk_wmem_alloc);
-	if (!sock_flag(sk, SOCK_USE_WRITE_QUEUE))
+	if (!sock_flag(sk, SOCK_USE_WRITE_QUEUE)) {
+		/*
+		 * Keep a reference on sk_wmem_alloc, this will be released
+		 * after sk_write_space() call
+		 */
+		atomic_sub(len - 1, &sk->sk_wmem_alloc);
 		sk->sk_write_space(sk);
+		len = 1;
+	}
 	/*
-	 * if sk_wmem_alloc reached 0, we are last user and should
-	 * free this sock, as sk_free() call could not do it.
+	 * if sk_wmem_alloc reaches 0, we must finish what sk_free()
+	 * could not do because of in-flight packets
 	 */
-	if (res == 0)
+	if (atomic_sub_and_test(len, &sk->sk_wmem_alloc))
 		__sk_free(sk);
 }
 EXPORT_SYMBOL(sock_wfree);
@@ -1697,7 +1702,7 @@ int sock_no_shutdown(struct socket *sock, int how)
 EXPORT_SYMBOL(sock_no_shutdown);
 
 int sock_no_setsockopt(struct socket *sock, int level, int optname,
-		    char __user *optval, int optlen)
+		    char __user *optval, unsigned int optlen)
 {
 	return -EOPNOTSUPP;
 }
@@ -2018,7 +2023,7 @@ EXPORT_SYMBOL(sock_common_recvmsg);
  *	Set socket options on an inet socket.
  */
 int sock_common_setsockopt(struct socket *sock, int level, int optname,
-			   char __user *optval, int optlen)
+			   char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 
@@ -2028,7 +2033,7 @@ EXPORT_SYMBOL(sock_common_setsockopt);
 
 #ifdef CONFIG_COMPAT
 int compat_sock_common_setsockopt(struct socket *sock, int level, int optname,
-				  char __user *optval, int optlen)
+				  char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index e0879bfb7dd5..ac1205df6c86 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -194,7 +194,7 @@ static int dcbnl_reply(u8 value, u8 event, u8 cmd, u8 attr, u32 pid,
 	nlmsg_end(dcbnl_skb, nlh);
 	ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
 	if (ret)
-		goto err;
+		return -EINVAL;
 
 	return 0;
 nlmsg_failure:
@@ -275,7 +275,7 @@ static int dcbnl_getpfccfg(struct net_device *netdev, struct nlattr **tb,
 
 	ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
 	if (ret)
-		goto err;
+		goto err_out;
 
 	return 0;
 nlmsg_failure:
@@ -316,12 +316,11 @@ static int dcbnl_getperm_hwaddr(struct net_device *netdev, struct nlattr **tb,
 
 	ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
 	if (ret)
-		goto err;
+		goto err_out;
 
 	return 0;
 
 nlmsg_failure:
-err:
 	kfree_skb(dcbnl_skb);
 err_out:
 	return -EINVAL;
@@ -383,7 +382,7 @@ static int dcbnl_getcap(struct net_device *netdev, struct nlattr **tb,
 
 	ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
 	if (ret)
-		goto err;
+		goto err_out;
 
 	return 0;
 nlmsg_failure:
@@ -460,7 +459,7 @@ static int dcbnl_getnumtcs(struct net_device *netdev, struct nlattr **tb,
 	ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
 	if (ret) {
 		ret = -EINVAL;
-		goto err;
+		goto err_out;
 	}
 
 	return 0;
@@ -799,7 +798,7 @@ static int __dcbnl_pg_getcfg(struct net_device *netdev, struct nlattr **tb,
 
 	ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
 	if (ret)
-		goto err;
+		goto err_out;
 
 	return 0;
 
@@ -1063,7 +1062,7 @@ static int dcbnl_bcn_getcfg(struct net_device *netdev, struct nlattr **tb,
 
 	ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
 	if (ret)
-		goto err;
+		goto err_out;
 
 	return 0;
 
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index d6bc47363b1c..5ef32c2f0d6a 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -290,14 +290,14 @@ extern int	   dccp_disconnect(struct sock *sk, int flags);
 extern int	   dccp_getsockopt(struct sock *sk, int level, int optname,
 				   char __user *optval, int __user *optlen);
 extern int	   dccp_setsockopt(struct sock *sk, int level, int optname,
-				   char __user *optval, int optlen);
+				   char __user *optval, unsigned int optlen);
 #ifdef CONFIG_COMPAT
 extern int	   compat_dccp_getsockopt(struct sock *sk,
 				int level, int optname,
 				char __user *optval, int __user *optlen);
 extern int	   compat_dccp_setsockopt(struct sock *sk,
 				int level, int optname,
-				char __user *optval, int optlen);
+				char __user *optval, unsigned int optlen);
 #endif
 extern int	   dccp_ioctl(struct sock *sk, int cmd, unsigned long arg);
 extern int	   dccp_sendmsg(struct kiocb *iocb, struct sock *sk,
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index bc4467082a00..a156319fd0ac 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -393,7 +393,7 @@ out:
 EXPORT_SYMBOL_GPL(dccp_ioctl);
 
 static int dccp_setsockopt_service(struct sock *sk, const __be32 service,
-				   char __user *optval, int optlen)
+				   char __user *optval, unsigned int optlen)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
 	struct dccp_service_list *sl = NULL;
@@ -464,7 +464,7 @@ static int dccp_setsockopt_cscov(struct sock *sk, int cscov, bool rx)
 }
 
 static int dccp_setsockopt_ccid(struct sock *sk, int type,
-				char __user *optval, int optlen)
+				char __user *optval, unsigned int optlen)
 {
 	u8 *val;
 	int rc = 0;
@@ -494,7 +494,7 @@ static int dccp_setsockopt_ccid(struct sock *sk, int type,
 }
 
 static int do_dccp_setsockopt(struct sock *sk, int level, int optname,
-		char __user *optval, int optlen)
+		char __user *optval, unsigned int optlen)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
 	int val, err = 0;
@@ -546,7 +546,7 @@ static int do_dccp_setsockopt(struct sock *sk, int level, int optname,
 }
 
 int dccp_setsockopt(struct sock *sk, int level, int optname,
-		    char __user *optval, int optlen)
+		    char __user *optval, unsigned int optlen)
 {
 	if (level != SOL_DCCP)
 		return inet_csk(sk)->icsk_af_ops->setsockopt(sk, level,
@@ -559,7 +559,7 @@ EXPORT_SYMBOL_GPL(dccp_setsockopt);
 
 #ifdef CONFIG_COMPAT
 int compat_dccp_setsockopt(struct sock *sk, int level, int optname,
-			   char __user *optval, int optlen)
+			   char __user *optval, unsigned int optlen)
 {
 	if (level != SOL_DCCP)
 		return inet_csk_compat_setsockopt(sk, level, optname,
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 77d40289653c..7a58c87baf17 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -157,7 +157,7 @@ static struct hlist_head dn_sk_hash[DN_SK_HASH_SIZE];
 static struct hlist_head dn_wild_sk;
 static atomic_t decnet_memory_allocated;
 
-static int __dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen, int flags);
+static int __dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen, int flags);
 static int __dn_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen, int flags);
 
 static struct hlist_head *dn_find_list(struct sock *sk)
@@ -1325,7 +1325,7 @@ out:
 	return err;
 }
 
-static int dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+static int dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	int err;
@@ -1337,7 +1337,7 @@ static int dn_setsockopt(struct socket *sock, int level, int optname, char __use
 	return err;
 }
 
-static int __dn_setsockopt(struct socket *sock, int level,int optname, char __user *optval, int optlen, int flags)
+static int __dn_setsockopt(struct socket *sock, int level,int optname, char __user *optval, unsigned int optlen, int flags)
 {
 	struct	sock *sk = sock->sk;
 	struct dn_scp *scp = DN_SK(sk);
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
index 51593a48f2dd..a413b1bf4465 100644
--- a/net/ieee802154/dgram.c
+++ b/net/ieee802154/dgram.c
@@ -414,7 +414,7 @@ static int dgram_getsockopt(struct sock *sk, int level, int optname,
 }
 
 static int dgram_setsockopt(struct sock *sk, int level, int optname,
-		    char __user *optval, int optlen)
+		    char __user *optval, unsigned int optlen)
 {
 	struct dgram_sock *ro = dgram_sk(sk);
 	int val;
diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c
index 13198859982e..30e74eee07d6 100644
--- a/net/ieee802154/raw.c
+++ b/net/ieee802154/raw.c
@@ -244,7 +244,7 @@ static int raw_getsockopt(struct sock *sk, int level, int optname,
 }
 
 static int raw_setsockopt(struct sock *sk, int level, int optname,
-		    char __user *optval, int optlen)
+		    char __user *optval, unsigned int optlen)
 {
 	return -EOPNOTSUPP;
 }
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 58c4b0f7c4aa..57737b8d1711 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1119,6 +1119,7 @@ int inet_sk_rebuild_header(struct sock *sk)
 {
 	struct flowi fl = {
 		.oif = sk->sk_bound_dev_if,
+		.mark = sk->sk_mark,
 		.nl_u = {
 			.ip4_u = {
 				.daddr	= daddr,
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index e92f1fd28aa5..5df2f6a0b0f0 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1077,12 +1077,16 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 		ip_mc_up(in_dev);
 		/* fall through */
 	case NETDEV_CHANGEADDR:
-		if (IN_DEV_ARP_NOTIFY(in_dev))
-			arp_send(ARPOP_REQUEST, ETH_P_ARP,
-				 in_dev->ifa_list->ifa_address,
-				 dev,
-				 in_dev->ifa_list->ifa_address,
-				 NULL, dev->dev_addr, NULL);
+		/* Send gratuitous ARP to notify of link change */
+		if (IN_DEV_ARP_NOTIFY(in_dev)) {
+			struct in_ifaddr *ifa = in_dev->ifa_list;
+
+			if (ifa)
+				arp_send(ARPOP_REQUEST, ETH_P_ARP,
+					 ifa->ifa_address, dev,
+					 ifa->ifa_address, NULL,
+					 dev->dev_addr, NULL);
+		}
 		break;
 	case NETDEV_DOWN:
 		ip_mc_down(in_dev);
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 22cd19ee44e5..537731b3bcb3 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -446,6 +446,28 @@ extern int sysctl_tcp_synack_retries;
 
 EXPORT_SYMBOL_GPL(inet_csk_reqsk_queue_hash_add);
 
+/* Decide when to expire the request and when to resend SYN-ACK */
+static inline void syn_ack_recalc(struct request_sock *req, const int thresh,
+				  const int max_retries,
+				  const u8 rskq_defer_accept,
+				  int *expire, int *resend)
+{
+	if (!rskq_defer_accept) {
+		*expire = req->retrans >= thresh;
+		*resend = 1;
+		return;
+	}
+	*expire = req->retrans >= thresh &&
+		  (!inet_rsk(req)->acked || req->retrans >= max_retries);
+	/*
+	 * Do not resend while waiting for data after ACK,
+	 * start to resend on end of deferring period to give
+	 * last chance for data or ACK to create established socket.
+	 */
+	*resend = !inet_rsk(req)->acked ||
+		  req->retrans >= rskq_defer_accept - 1;
+}
+
 void inet_csk_reqsk_queue_prune(struct sock *parent,
 				const unsigned long interval,
 				const unsigned long timeout,
@@ -501,9 +523,15 @@ void inet_csk_reqsk_queue_prune(struct sock *parent,
 		reqp=&lopt->syn_table[i];
 		while ((req = *reqp) != NULL) {
 			if (time_after_eq(now, req->expires)) {
-				if ((req->retrans < thresh ||
-				     (inet_rsk(req)->acked && req->retrans < max_retries))
-				    && !req->rsk_ops->rtx_syn_ack(parent, req)) {
+				int expire = 0, resend = 0;
+
+				syn_ack_recalc(req, thresh, max_retries,
+					       queue->rskq_defer_accept,
+					       &expire, &resend);
+				if (!expire &&
+				    (!resend ||
+				     !req->rsk_ops->rtx_syn_ack(parent, req) ||
+				     inet_rsk(req)->acked)) {
 					unsigned long timeo;
 
 					if (req->retrans++ == 0)
@@ -714,7 +742,7 @@ int inet_csk_compat_getsockopt(struct sock *sk, int level, int optname,
 EXPORT_SYMBOL_GPL(inet_csk_compat_getsockopt);
 
 int inet_csk_compat_setsockopt(struct sock *sk, int level, int optname,
-			       char __user *optval, int optlen)
+			       char __user *optval, unsigned int optlen)
 {
 	const struct inet_connection_sock *icsk = inet_csk(sk);
 
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 9fe5d7b81580..f9895180f481 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -335,6 +335,7 @@ int ip_queue_xmit(struct sk_buff *skb, int ipfragok)
 
 		{
 			struct flowi fl = { .oif = sk->sk_bound_dev_if,
+					    .mark = sk->sk_mark,
 					    .nl_u = { .ip4_u =
 						      { .daddr = daddr,
 							.saddr = inet->saddr,
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 5a0693576e82..e982b5c1ee17 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -440,7 +440,7 @@ out:
  */
 
 static int do_ip_setsockopt(struct sock *sk, int level,
-			    int optname, char __user *optval, int optlen)
+			    int optname, char __user *optval, unsigned int optlen)
 {
 	struct inet_sock *inet = inet_sk(sk);
 	int val = 0, err;
@@ -634,17 +634,16 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 				break;
 			}
 			dev = ip_dev_find(sock_net(sk), mreq.imr_address.s_addr);
-			if (dev) {
+			if (dev)
 				mreq.imr_ifindex = dev->ifindex;
-				dev_put(dev);
-			}
 		} else
-			dev = __dev_get_by_index(sock_net(sk), mreq.imr_ifindex);
+			dev = dev_get_by_index(sock_net(sk), mreq.imr_ifindex);
 
 
 		err = -EADDRNOTAVAIL;
 		if (!dev)
 			break;
+		dev_put(dev);
 
 		err = -EINVAL;
 		if (sk->sk_bound_dev_if &&
@@ -950,7 +949,7 @@ e_inval:
 }
 
 int ip_setsockopt(struct sock *sk, int level,
-		int optname, char __user *optval, int optlen)
+		int optname, char __user *optval, unsigned int optlen)
 {
 	int err;
 
@@ -975,7 +974,7 @@ EXPORT_SYMBOL(ip_setsockopt);
 
 #ifdef CONFIG_COMPAT
 int compat_ip_setsockopt(struct sock *sk, int level, int optname,
-			 char __user *optval, int optlen)
+			 char __user *optval, unsigned int optlen)
 {
 	int err;
 
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index c43ec2d51ce2..630a56df7b47 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -931,7 +931,7 @@ static void mrtsock_destruct(struct sock *sk)
  *	MOSPF/PIM router set up we can clean this up.
  */
 
-int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int optlen)
+int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen)
 {
 	int ret;
 	struct vifctl vif;
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index ebb1e5848bc6..757c9171e7c2 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -741,7 +741,7 @@ out:	return ret;
 }
 
 static int do_raw_setsockopt(struct sock *sk, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	if (optname == ICMP_FILTER) {
 		if (inet_sk(sk)->num != IPPROTO_ICMP)
@@ -753,7 +753,7 @@ static int do_raw_setsockopt(struct sock *sk, int level, int optname,
 }
 
 static int raw_setsockopt(struct sock *sk, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	if (level != SOL_RAW)
 		return ip_setsockopt(sk, level, optname, optval, optlen);
@@ -762,7 +762,7 @@ static int raw_setsockopt(struct sock *sk, int level, int optname,
 
 #ifdef CONFIG_COMPAT
 static int compat_raw_setsockopt(struct sock *sk, int level, int optname,
-				 char __user *optval, int optlen)
+				 char __user *optval, unsigned int optlen)
 {
 	if (level != SOL_RAW)
 		return compat_ip_setsockopt(sk, level, optname, optval, optlen);
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 21387ebabf00..90b2e0649bfb 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -326,6 +326,43 @@ void tcp_enter_memory_pressure(struct sock *sk)
 
 EXPORT_SYMBOL(tcp_enter_memory_pressure);
 
+/* Convert seconds to retransmits based on initial and max timeout */
+static u8 secs_to_retrans(int seconds, int timeout, int rto_max)
+{
+	u8 res = 0;
+
+	if (seconds > 0) {
+		int period = timeout;
+
+		res = 1;
+		while (seconds > period && res < 255) {
+			res++;
+			timeout <<= 1;
+			if (timeout > rto_max)
+				timeout = rto_max;
+			period += timeout;
+		}
+	}
+	return res;
+}
+
+/* Convert retransmits to seconds based on initial and max timeout */
+static int retrans_to_secs(u8 retrans, int timeout, int rto_max)
+{
+	int period = 0;
+
+	if (retrans > 0) {
+		period = timeout;
+		while (--retrans) {
+			timeout <<= 1;
+			if (timeout > rto_max)
+				timeout = rto_max;
+			period += timeout;
+		}
+	}
+	return period;
+}
+
 /*
  *	Wait for a TCP event.
  *
@@ -580,7 +617,7 @@ ssize_t tcp_splice_read(struct socket *sock, loff_t *ppos,
 
 	lock_sock(sk);
 
-	timeo = sock_rcvtimeo(sk, flags & SPLICE_F_NONBLOCK);
+	timeo = sock_rcvtimeo(sk, sock->file->f_flags & O_NONBLOCK);
 	while (tss.len) {
 		ret = __tcp_splice_read(sk, &tss);
 		if (ret < 0)
@@ -1405,7 +1442,9 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 				goto found_ok_skb;
 			if (tcp_hdr(skb)->fin)
 				goto found_fin_ok;
-			WARN_ON(!(flags & MSG_PEEK));
+			if (WARN_ON(!(flags & MSG_PEEK)))
+				printk(KERN_INFO "recvmsg bug 2: copied %X "
+				       "seq %X\n", *seq, TCP_SKB_CB(skb)->seq);
 		}
 
 		/* Well, if we have backlog, try to process it now yet. */
@@ -2032,7 +2071,7 @@ int tcp_disconnect(struct sock *sk, int flags)
  *	Socket option code for TCP.
  */
 static int do_tcp_setsockopt(struct sock *sk, int level,
-		int optname, char __user *optval, int optlen)
+		int optname, char __user *optval, unsigned int optlen)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct inet_connection_sock *icsk = inet_csk(sk);
@@ -2047,7 +2086,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
 			return -EINVAL;
 
 		val = strncpy_from_user(name, optval,
-					min(TCP_CA_NAME_MAX-1, optlen));
+					min_t(long, TCP_CA_NAME_MAX-1, optlen));
 		if (val < 0)
 			return -EFAULT;
 		name[val] = 0;
@@ -2163,16 +2202,10 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
 		break;
 
 	case TCP_DEFER_ACCEPT:
-		icsk->icsk_accept_queue.rskq_defer_accept = 0;
-		if (val > 0) {
-			/* Translate value in seconds to number of
-			 * retransmits */
-			while (icsk->icsk_accept_queue.rskq_defer_accept < 32 &&
-			       val > ((TCP_TIMEOUT_INIT / HZ) <<
-				       icsk->icsk_accept_queue.rskq_defer_accept))
-				icsk->icsk_accept_queue.rskq_defer_accept++;
-			icsk->icsk_accept_queue.rskq_defer_accept++;
-		}
+		/* Translate value in seconds to number of retransmits */
+		icsk->icsk_accept_queue.rskq_defer_accept =
+			secs_to_retrans(val, TCP_TIMEOUT_INIT / HZ,
+					TCP_RTO_MAX / HZ);
 		break;
 
 	case TCP_WINDOW_CLAMP:
@@ -2220,7 +2253,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
 }
 
 int tcp_setsockopt(struct sock *sk, int level, int optname, char __user *optval,
-		   int optlen)
+		   unsigned int optlen)
 {
 	struct inet_connection_sock *icsk = inet_csk(sk);
 
@@ -2232,7 +2265,7 @@ int tcp_setsockopt(struct sock *sk, int level, int optname, char __user *optval,
 
 #ifdef CONFIG_COMPAT
 int compat_tcp_setsockopt(struct sock *sk, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	if (level != SOL_TCP)
 		return inet_csk_compat_setsockopt(sk, level, optname,
@@ -2353,8 +2386,8 @@ static int do_tcp_getsockopt(struct sock *sk, int level,
 			val = (val ? : sysctl_tcp_fin_timeout) / HZ;
 		break;
 	case TCP_DEFER_ACCEPT:
-		val = !icsk->icsk_accept_queue.rskq_defer_accept ? 0 :
-			((TCP_TIMEOUT_INIT / HZ) << (icsk->icsk_accept_queue.rskq_defer_accept - 1));
+		val = retrans_to_secs(icsk->icsk_accept_queue.rskq_defer_accept,
+				      TCP_TIMEOUT_INIT / HZ, TCP_RTO_MAX / HZ);
 		break;
 	case TCP_WINDOW_CLAMP:
 		val = tp->window_clamp;
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 624c3c9b3c2b..4c03598ed924 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -641,8 +641,8 @@ struct sock *tcp_check_req(struct sock *sk, struct sk_buff *skb,
 	if (!(flg & TCP_FLAG_ACK))
 		return NULL;
 
-	/* If TCP_DEFER_ACCEPT is set, drop bare ACK. */
-	if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
+	/* While TCP_DEFER_ACCEPT is active, drop bare ACK. */
+	if (req->retrans < inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
 	    TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
 		inet_rsk(req)->acked = 1;
 		return NULL;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 5200aab0ca97..fcd278a7080e 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -361,6 +361,7 @@ static inline int tcp_urg_mode(const struct tcp_sock *tp)
 #define OPTION_SACK_ADVERTISE	(1 << 0)
 #define OPTION_TS		(1 << 1)
 #define OPTION_MD5		(1 << 2)
+#define OPTION_WSCALE		(1 << 3)
 
 struct tcp_out_options {
 	u8 options;		/* bit field of OPTION_* */
@@ -427,7 +428,7 @@ static void tcp_options_write(__be32 *ptr, struct tcp_sock *tp,
 			       TCPOLEN_SACK_PERM);
 	}
 
-	if (unlikely(opts->ws)) {
+	if (unlikely(OPTION_WSCALE & opts->options)) {
 		*ptr++ = htonl((TCPOPT_NOP << 24) |
 			       (TCPOPT_WINDOW << 16) |
 			       (TCPOLEN_WINDOW << 8) |
@@ -494,8 +495,8 @@ static unsigned tcp_syn_options(struct sock *sk, struct sk_buff *skb,
 	}
 	if (likely(sysctl_tcp_window_scaling)) {
 		opts->ws = tp->rx_opt.rcv_wscale;
-		if (likely(opts->ws))
-			size += TCPOLEN_WSCALE_ALIGNED;
+		opts->options |= OPTION_WSCALE;
+		size += TCPOLEN_WSCALE_ALIGNED;
 	}
 	if (likely(sysctl_tcp_sack)) {
 		opts->options |= OPTION_SACK_ADVERTISE;
@@ -537,8 +538,8 @@ static unsigned tcp_synack_options(struct sock *sk,
 
 	if (likely(ireq->wscale_ok)) {
 		opts->ws = ireq->rcv_wscale;
-		if (likely(opts->ws))
-			size += TCPOLEN_WSCALE_ALIGNED;
+		opts->options |= OPTION_WSCALE;
+		size += TCPOLEN_WSCALE_ALIGNED;
 	}
 	if (likely(doing_ts)) {
 		opts->options |= OPTION_TS;
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index ebaaa7f973d7..d0d436d6216c 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -696,6 +696,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 
 	if (rt == NULL) {
 		struct flowi fl = { .oif = ipc.oif,
+				    .mark = sk->sk_mark,
 				    .nl_u = { .ip4_u =
 					      { .daddr = faddr,
 						.saddr = saddr,
@@ -840,6 +841,42 @@ out:
 	return ret;
 }
 
+
+/**
+ *	first_packet_length	- return length of first packet in receive queue
+ *	@sk: socket
+ *
+ *	Drops all bad checksum frames, until a valid one is found.
+ *	Returns the length of found skb, or 0 if none is found.
+ */
+static unsigned int first_packet_length(struct sock *sk)
+{
+	struct sk_buff_head list_kill, *rcvq = &sk->sk_receive_queue;
+	struct sk_buff *skb;
+	unsigned int res;
+
+	__skb_queue_head_init(&list_kill);
+
+	spin_lock_bh(&rcvq->lock);
+	while ((skb = skb_peek(rcvq)) != NULL &&
+		udp_lib_checksum_complete(skb)) {
+		UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS,
+				 IS_UDPLITE(sk));
+		__skb_unlink(skb, rcvq);
+		__skb_queue_tail(&list_kill, skb);
+	}
+	res = skb ? skb->len : 0;
+	spin_unlock_bh(&rcvq->lock);
+
+	if (!skb_queue_empty(&list_kill)) {
+		lock_sock(sk);
+		__skb_queue_purge(&list_kill);
+		sk_mem_reclaim_partial(sk);
+		release_sock(sk);
+	}
+	return res;
+}
+
 /*
  *	IOCTL requests applicable to the UDP protocol
  */
@@ -856,21 +893,16 @@ int udp_ioctl(struct sock *sk, int cmd, unsigned long arg)
 
 	case SIOCINQ:
 	{
-		struct sk_buff *skb;
-		unsigned long amount;
+		unsigned int amount = first_packet_length(sk);
 
-		amount = 0;
-		spin_lock_bh(&sk->sk_receive_queue.lock);
-		skb = skb_peek(&sk->sk_receive_queue);
-		if (skb != NULL) {
+		if (amount)
 			/*
 			 * We will only return the amount
 			 * of this packet since that is all
 			 * that will be read.
 			 */
-			amount = skb->len - sizeof(struct udphdr);
-		}
-		spin_unlock_bh(&sk->sk_receive_queue.lock);
+			amount -= sizeof(struct udphdr);
+
 		return put_user(amount, (int __user *)arg);
 	}
 
@@ -1359,7 +1391,7 @@ void udp_destroy_sock(struct sock *sk)
  *	Socket option code for UDP
  */
 int udp_lib_setsockopt(struct sock *sk, int level, int optname,
-		       char __user *optval, int optlen,
+		       char __user *optval, unsigned int optlen,
 		       int (*push_pending_frames)(struct sock *))
 {
 	struct udp_sock *up = udp_sk(sk);
@@ -1441,7 +1473,7 @@ int udp_lib_setsockopt(struct sock *sk, int level, int optname,
 EXPORT_SYMBOL(udp_lib_setsockopt);
 
 int udp_setsockopt(struct sock *sk, int level, int optname,
-		   char __user *optval, int optlen)
+		   char __user *optval, unsigned int optlen)
 {
 	if (level == SOL_UDP  ||  level == SOL_UDPLITE)
 		return udp_lib_setsockopt(sk, level, optname, optval, optlen,
@@ -1451,7 +1483,7 @@ int udp_setsockopt(struct sock *sk, int level, int optname,
 
 #ifdef CONFIG_COMPAT
 int compat_udp_setsockopt(struct sock *sk, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	if (level == SOL_UDP  ||  level == SOL_UDPLITE)
 		return udp_lib_setsockopt(sk, level, optname, optval, optlen,
@@ -1539,29 +1571,11 @@ unsigned int udp_poll(struct file *file, struct socket *sock, poll_table *wait)
 {
 	unsigned int mask = datagram_poll(file, sock, wait);
 	struct sock *sk = sock->sk;
-	int 	is_lite = IS_UDPLITE(sk);
 
 	/* Check for false positives due to checksum errors */
-	if ((mask & POLLRDNORM) &&
-	    !(file->f_flags & O_NONBLOCK) &&
-	    !(sk->sk_shutdown & RCV_SHUTDOWN)) {
-		struct sk_buff_head *rcvq = &sk->sk_receive_queue;
-		struct sk_buff *skb;
-
-		spin_lock_bh(&rcvq->lock);
-		while ((skb = skb_peek(rcvq)) != NULL &&
-		       udp_lib_checksum_complete(skb)) {
-			UDP_INC_STATS_BH(sock_net(sk),
-					UDP_MIB_INERRORS, is_lite);
-			__skb_unlink(skb, rcvq);
-			kfree_skb(skb);
-		}
-		spin_unlock_bh(&rcvq->lock);
-
-		/* nothing to see, move along */
-		if (skb == NULL)
-			mask &= ~(POLLIN | POLLRDNORM);
-	}
+	if ((mask & POLLRDNORM) && !(file->f_flags & O_NONBLOCK) &&
+	    !(sk->sk_shutdown & RCV_SHUTDOWN) && !first_packet_length(sk))
+		mask &= ~(POLLIN | POLLRDNORM);
 
 	return mask;
 
diff --git a/net/ipv4/udp_impl.h b/net/ipv4/udp_impl.h
index 9f4a6165f722..aaad650d47d9 100644
--- a/net/ipv4/udp_impl.h
+++ b/net/ipv4/udp_impl.h
@@ -11,13 +11,13 @@ extern void 	__udp4_lib_err(struct sk_buff *, u32, struct udp_table *);
 extern int	udp_v4_get_port(struct sock *sk, unsigned short snum);
 
 extern int	udp_setsockopt(struct sock *sk, int level, int optname,
-			       char __user *optval, int optlen);
+			       char __user *optval, unsigned int optlen);
 extern int	udp_getsockopt(struct sock *sk, int level, int optname,
 			       char __user *optval, int __user *optlen);
 
 #ifdef CONFIG_COMPAT
 extern int	compat_udp_setsockopt(struct sock *sk, int level, int optname,
-				      char __user *optval, int optlen);
+				      char __user *optval, unsigned int optlen);
 extern int	compat_udp_getsockopt(struct sock *sk, int level, int optname,
 				      char __user *optval, int __user *optlen);
 #endif
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 090675e269ee..716153941fc4 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -1281,7 +1281,7 @@ int ip6mr_sk_done(struct sock *sk)
  *	MOSPF/PIM router set up we can clean this up.
  */
 
-int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int optlen)
+int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen)
 {
 	int ret;
 	struct mif6ctl vif;
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index f5e0682b402d..4f7aaf6996a3 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -123,7 +123,7 @@ struct ipv6_txoptions *ipv6_update_options(struct sock *sk,
 }
 
 static int do_ipv6_setsockopt(struct sock *sk, int level, int optname,
-		    char __user *optval, int optlen)
+		    char __user *optval, unsigned int optlen)
 {
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct net *net = sock_net(sk);
@@ -496,13 +496,17 @@ done:
 			goto e_inval;
 
 		if (val) {
+			struct net_device *dev;
+
 			if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != val)
 				goto e_inval;
 
-			if (__dev_get_by_index(net, val) == NULL) {
+			dev = dev_get_by_index(net, val);
+			if (!dev) {
 				retv = -ENODEV;
 				break;
 			}
+			dev_put(dev);
 		}
 		np->mcast_oif = val;
 		retv = 0;
@@ -773,7 +777,7 @@ e_inval:
 }
 
 int ipv6_setsockopt(struct sock *sk, int level, int optname,
-		    char __user *optval, int optlen)
+		    char __user *optval, unsigned int optlen)
 {
 	int err;
 
@@ -801,7 +805,7 @@ EXPORT_SYMBOL(ipv6_setsockopt);
 
 #ifdef CONFIG_COMPAT
 int compat_ipv6_setsockopt(struct sock *sk, int level, int optname,
-			   char __user *optval, int optlen)
+			   char __user *optval, unsigned int optlen)
 {
 	int err;
 
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 498b9b0b0fad..f74e4e2cdd06 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -658,7 +658,6 @@ void ndisc_send_rs(struct net_device *dev, const struct in6_addr *saddr,
 		     &icmp6h, NULL,
 		     send_sllao ? ND_OPT_SOURCE_LL_ADDR : 0);
 }
-EXPORT_SYMBOL(ndisc_send_rs);
 
 
 static void ndisc_error_report(struct neighbour *neigh, struct sk_buff *skb)
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 7d675b8d82d3..4f24570b0869 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -957,7 +957,7 @@ static int rawv6_geticmpfilter(struct sock *sk, int level, int optname,
 
 
 static int do_rawv6_setsockopt(struct sock *sk, int level, int optname,
-			    char __user *optval, int optlen)
+			    char __user *optval, unsigned int optlen)
 {
 	struct raw6_sock *rp = raw6_sk(sk);
 	int val;
@@ -1000,7 +1000,7 @@ static int do_rawv6_setsockopt(struct sock *sk, int level, int optname,
 }
 
 static int rawv6_setsockopt(struct sock *sk, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	switch(level) {
 		case SOL_RAW:
@@ -1024,7 +1024,7 @@ static int rawv6_setsockopt(struct sock *sk, int level, int optname,
 
 #ifdef CONFIG_COMPAT
 static int compat_rawv6_setsockopt(struct sock *sk, int level, int optname,
-				   char __user *optval, int optlen)
+				   char __user *optval, unsigned int optlen)
 {
 	switch (level) {
 	case SOL_RAW:
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index fcb539628847..dbd19a78ca73 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -15,7 +15,6 @@
  * Roger Venning <r.venning@telstra.com>:	6to4 support
  * Nate Thompson <nate@thebog.net>:		6to4 support
  * Fred Templin <fred.l.templin@boeing.com>:	isatap support
- * Sascha Hlusiak <mail@saschahlusiak.de>:	stateless autoconf for isatap
  */
 
 #include <linux/module.h>
@@ -223,44 +222,6 @@ failed:
 	return NULL;
 }
 
-static void ipip6_tunnel_rs_timer(unsigned long data)
-{
-	struct ip_tunnel_prl_entry *p = (struct ip_tunnel_prl_entry *) data;
-	struct inet6_dev *ifp;
-	struct inet6_ifaddr *addr;
-
-	spin_lock(&p->lock);
-	ifp = __in6_dev_get(p->tunnel->dev);
-
-	read_lock_bh(&ifp->lock);
-	for (addr = ifp->addr_list; addr; addr = addr->if_next) {
-		struct in6_addr rtr;
-
-		if (!(ipv6_addr_type(&addr->addr) & IPV6_ADDR_LINKLOCAL))
-			continue;
-
-		/* Send RS to guessed linklocal address of router
-		 *
-		 * Better: send to ff02::2 encapsuled in unicast directly
-		 * to router-v4 instead of guessing the v6 address.
-		 *
-		 * Cisco/Windows seem to not set the u/l bit correctly,
-		 * so we won't guess right.
-		 */
-		ipv6_addr_set(&rtr,  htonl(0xFE800000), 0, 0, 0);
-		if (!__ipv6_isatap_ifid(rtr.s6_addr + 8,
-					p->addr)) {
-			ndisc_send_rs(p->tunnel->dev, &addr->addr, &rtr);
-		}
-	}
-	read_unlock_bh(&ifp->lock);
-
-	mod_timer(&p->rs_timer, jiffies + HZ * p->rs_delay);
-	spin_unlock(&p->lock);
-
-	return;
-}
-
 static struct ip_tunnel_prl_entry *
 __ipip6_tunnel_locate_prl(struct ip_tunnel *t, __be32 addr)
 {
@@ -313,13 +274,12 @@ static int ipip6_tunnel_get_prl(struct ip_tunnel *t,
 
 	c = 0;
 	for (prl = t->prl; prl; prl = prl->next) {
-		if (c > cmax)
+		if (c >= cmax)
 			break;
 		if (kprl.addr != htonl(INADDR_ANY) && prl->addr != kprl.addr)
 			continue;
 		kp[c].addr = prl->addr;
 		kp[c].flags = prl->flags;
-		kp[c].rs_delay = prl->rs_delay;
 		c++;
 		if (kprl.addr != htonl(INADDR_ANY))
 			break;
@@ -369,23 +329,11 @@ ipip6_tunnel_add_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a, int chg)
 	}
 
 	p->next = t->prl;
-	p->tunnel = t;
 	t->prl = p;
 	t->prl_count++;
-
-	spin_lock_init(&p->lock);
-	setup_timer(&p->rs_timer, ipip6_tunnel_rs_timer, (unsigned long) p);
 update:
 	p->addr = a->addr;
 	p->flags = a->flags;
-	p->rs_delay = a->rs_delay;
-	if (p->rs_delay == 0)
-		p->rs_delay = IPTUNNEL_RS_DEFAULT_DELAY;
-	spin_lock(&p->lock);
-	del_timer(&p->rs_timer);
-	if (p->flags & PRL_DEFAULT)
-		mod_timer(&p->rs_timer, jiffies + 1);
-	spin_unlock(&p->lock);
 out:
 	write_unlock(&ipip6_lock);
 	return err;
@@ -404,9 +352,6 @@ ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
 			if ((*p)->addr == a->addr) {
 				x = *p;
 				*p = x->next;
-				spin_lock(&x->lock);
-				del_timer(&x->rs_timer);
-				spin_unlock(&x->lock);
 				kfree(x);
 				t->prl_count--;
 				goto out;
@@ -417,9 +362,6 @@ ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
 		while (t->prl) {
 			x = t->prl;
 			t->prl = t->prl->next;
-			spin_lock(&x->lock);
-			del_timer(&x->rs_timer);
-			spin_unlock(&x->lock);
 			kfree(x);
 			t->prl_count--;
 		}
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index b265b7047d3e..3a60f12b34ed 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1044,7 +1044,7 @@ void udpv6_destroy_sock(struct sock *sk)
  *	Socket option code for UDP
  */
 int udpv6_setsockopt(struct sock *sk, int level, int optname,
-		     char __user *optval, int optlen)
+		     char __user *optval, unsigned int optlen)
 {
 	if (level == SOL_UDP  ||  level == SOL_UDPLITE)
 		return udp_lib_setsockopt(sk, level, optname, optval, optlen,
@@ -1054,7 +1054,7 @@ int udpv6_setsockopt(struct sock *sk, int level, int optname,
 
 #ifdef CONFIG_COMPAT
 int compat_udpv6_setsockopt(struct sock *sk, int level, int optname,
-			    char __user *optval, int optlen)
+			    char __user *optval, unsigned int optlen)
 {
 	if (level == SOL_UDP  ||  level == SOL_UDPLITE)
 		return udp_lib_setsockopt(sk, level, optname, optval, optlen,
diff --git a/net/ipv6/udp_impl.h b/net/ipv6/udp_impl.h
index 6bb303471e20..d7571046bfc4 100644
--- a/net/ipv6/udp_impl.h
+++ b/net/ipv6/udp_impl.h
@@ -16,10 +16,10 @@ extern int	udp_v6_get_port(struct sock *sk, unsigned short snum);
 extern int	udpv6_getsockopt(struct sock *sk, int level, int optname,
 				 char __user *optval, int __user *optlen);
 extern int	udpv6_setsockopt(struct sock *sk, int level, int optname,
-				 char __user *optval, int optlen);
+				 char __user *optval, unsigned int optlen);
 #ifdef CONFIG_COMPAT
 extern int	compat_udpv6_setsockopt(struct sock *sk, int level, int optname,
-					char __user *optval, int optlen);
+					char __user *optval, unsigned int optlen);
 extern int	compat_udpv6_getsockopt(struct sock *sk, int level, int optname,
 				       char __user *optval, int __user *optlen);
 #endif
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index f1118d92a191..66c7a20011f3 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -1292,7 +1292,7 @@ const char *ipx_device_name(struct ipx_interface *intrfc)
  * socket object. */
 
 static int ipx_setsockopt(struct socket *sock, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	int opt;
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 50b43c57d5d8..dd35641835f4 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1826,7 +1826,7 @@ static int irda_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned lon
  *
  */
 static int irda_setsockopt(struct socket *sock, int level, int optname,
-			   char __user *optval, int optlen)
+			   char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct irda_sock *self = irda_sk(sk);
diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c
index eafc010907c2..3c1754023022 100644
--- a/net/irda/ircomm/ircomm_tty_attach.c
+++ b/net/irda/ircomm/ircomm_tty_attach.c
@@ -30,6 +30,7 @@
  ********************************************************************/
 
 #include <linux/init.h>
+#include <linux/sched.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irlmp.h>
diff --git a/net/irda/irlan/irlan_common.c b/net/irda/irlan/irlan_common.c
index 62116829b817..315ead3cb926 100644
--- a/net/irda/irlan/irlan_common.c
+++ b/net/irda/irlan/irlan_common.c
@@ -30,6 +30,7 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/proc_fs.h>
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/random.h>
 #include <linux/netdevice.h>
diff --git a/net/irda/irlan/irlan_eth.c b/net/irda/irlan/irlan_eth.c
index 7b6b631f647f..d340110f5c0c 100644
--- a/net/irda/irlan/irlan_eth.c
+++ b/net/irda/irlan/irlan_eth.c
@@ -30,6 +30,7 @@
 #include <linux/inetdevice.h>
 #include <linux/if_arp.h>
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <net/arp.h>
 
 #include <net/irda/irda.h>
diff --git a/net/irda/irnet/irnet_irda.c b/net/irda/irnet/irnet_irda.c
index cf9a4b531a98..cccc2e93234f 100644
--- a/net/irda/irnet/irnet_irda.c
+++ b/net/irda/irnet/irnet_irda.c
@@ -9,6 +9,7 @@
  */
 
 #include "irnet_irda.h"		/* Private header */
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <asm/unaligned.h>
 
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 68cbcb19cbd8..7dea882dbb75 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -13,6 +13,7 @@
  *	2) as a control channel (write commands, read events)
  */
 
+#include <linux/sched.h>
 #include <linux/smp_lock.h>
 #include "irnet_ppp.h"		/* Private header */
 /* Please put other headers in irnet.h - Thanks */
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index d985d163dcfc..bada1b9c670b 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -1387,7 +1387,7 @@ static int iucv_sock_release(struct socket *sock)
 
 /* getsockopt and setsockopt */
 static int iucv_sock_setsockopt(struct socket *sock, int level, int optname,
-				char __user *optval, int optlen)
+				char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct iucv_sock *iucv = iucv_sk(sk);
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index c45eee1c0e8d..7aa4fd170104 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -973,7 +973,7 @@ static int llc_ui_ioctl(struct socket *sock, unsigned int cmd,
  *	Set various connection specific parameters.
  */
 static int llc_ui_setsockopt(struct socket *sock, int level, int optname,
-			     char __user *optval, int optlen)
+			     char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct llc_sock *llc = llc_sk(sk);
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 920ec8792f4b..6eaf69823439 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -544,7 +544,7 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 		       "%pM\n", bss->cbss.bssid, ifibss->bssid);
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
 
-	if (bss && memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) {
+	if (bss && !memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) {
 		printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM"
 		       " based on configured SSID\n",
 		       sdata->dev->name, bss->cbss.bssid);
@@ -829,7 +829,7 @@ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local)
 		if (!sdata->u.ibss.ssid_len)
 			continue;
 		sdata->u.ibss.last_scan_completed = jiffies;
-		ieee80211_sta_find_ibss(sdata);
+		mod_timer(&sdata->u.ibss.timer, 0);
 	}
 	mutex_unlock(&local->iflist_mtx);
 }
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 97a278a2f48e..8d26e9bf8964 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1388,8 +1388,8 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
 
-	printk(KERN_DEBUG "%s: disassociated (Reason: %u)\n",
-			sdata->dev->name, reason_code);
+	printk(KERN_DEBUG "%s: disassociated from %pM (Reason: %u)\n",
+			sdata->dev->name, mgmt->sa, reason_code);
 
 	ieee80211_set_disassoc(sdata, false);
 	return RX_MGMT_CFG80211_DISASSOC;
@@ -1675,7 +1675,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
 
 	/* direct probe may be part of the association flow */
 	if (wk && wk->state == IEEE80211_MGD_STATE_PROBE) {
-		printk(KERN_DEBUG "%s direct probe responded\n",
+		printk(KERN_DEBUG "%s: direct probe responded\n",
 		       sdata->dev->name);
 		wk->tries = 0;
 		wk->state = IEEE80211_MGD_STATE_AUTH;
@@ -2502,9 +2502,6 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_mgd_work *wk;
 	const u8 *bssid = NULL;
 
-	printk(KERN_DEBUG "%s: deauthenticating by local choice (reason=%d)\n",
-	       sdata->dev->name, req->reason_code);
-
 	mutex_lock(&ifmgd->mtx);
 
 	if (ifmgd->associated && &ifmgd->associated->cbss == req->bss) {
@@ -2532,6 +2529,9 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
 
 	mutex_unlock(&ifmgd->mtx);
 
+	printk(KERN_DEBUG "%s: deauthenticating from %pM by local choice (reason=%d)\n",
+	       sdata->dev->name, bssid, req->reason_code);
+
 	ieee80211_send_deauth_disassoc(sdata, bssid,
 			IEEE80211_STYPE_DEAUTH, req->reason_code,
 			cookie);
@@ -2545,9 +2545,6 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
-	printk(KERN_DEBUG "%s: disassociating by local choice (reason=%d)\n",
-	       sdata->dev->name, req->reason_code);
-
 	mutex_lock(&ifmgd->mtx);
 
 	/*
@@ -2561,6 +2558,9 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
 		return -ENOLINK;
 	}
 
+	printk(KERN_DEBUG "%s: disassociating from %pM by local choice (reason=%d)\n",
+	       sdata->dev->name, req->bss->bssid, req->reason_code);
+
 	ieee80211_set_disassoc(sdata, false);
 
 	mutex_unlock(&ifmgd->mtx);
diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c
index a59043fbb0ff..45667054a5f3 100644
--- a/net/mac80211/rc80211_pid_debugfs.c
+++ b/net/mac80211/rc80211_pid_debugfs.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/poll.h>
 #include <linux/netdevice.h>
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index c01588f9d453..7170bf4565a8 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2164,11 +2164,17 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 
 	skb = rx.skb;
 
-	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+	if (rx.sdata && ieee80211_is_data(hdr->frame_control)) {
+		rx.flags |= IEEE80211_RX_RA_MATCH;
+		prepares = prepare_for_handlers(rx.sdata, &rx, hdr);
+		if (prepares)
+			prev = rx.sdata;
+	} else list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 		if (!netif_running(sdata->dev))
 			continue;
 
-		if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
+		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 			continue;
 
 		rx.flags |= IEEE80211_RX_RA_MATCH;
@@ -2447,6 +2453,8 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 
+	WARN_ON_ONCE(softirq_count() == 0);
+
 	if (WARN_ON(status->band < 0 ||
 		    status->band >= IEEE80211_NUM_BANDS))
 		goto drop;
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index eec001491e66..594f2318c3d8 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -361,6 +361,7 @@ int sta_info_insert(struct sta_info *sta)
 					     u.ap);
 
 		drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD, &sta->sta);
+		sdata = sta->sdata;
 	}
 
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
@@ -496,6 +497,7 @@ static void __sta_info_unlink(struct sta_info **sta)
 
 		drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
 			       &(*sta)->sta);
+		sdata = (*sta)->sdata;
 	}
 
 	if (ieee80211_vif_is_mesh(&sdata->vif)) {
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 5143d203256b..db4bda681ec9 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -367,7 +367,10 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
 	u32 staflags;
 
-	if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)))
+	if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)
+			|| ieee80211_is_auth(hdr->frame_control)
+			|| ieee80211_is_assoc_resp(hdr->frame_control)
+			|| ieee80211_is_reassoc_resp(hdr->frame_control)))
 		return TX_CONTINUE;
 
 	staflags = get_sta_flags(sta);
@@ -1701,7 +1704,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 	if (!is_multicast_ether_addr(hdr.addr1)) {
 		rcu_read_lock();
 		sta = sta_info_get(local, hdr.addr1);
-		if (sta)
+		/* XXX: in the future, use sdata to look up the sta */
+		if (sta && sta->sdata == sdata)
 			sta_flags = get_sta_flags(sta);
 		rcu_read_unlock();
 	}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index dd6564321369..aeb65b3d2295 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -339,7 +339,7 @@ void ieee80211_add_pending_skb(struct ieee80211_local *local,
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 	if (WARN_ON(!info->control.vif)) {
-		kfree(skb);
+		kfree_skb(skb);
 		return;
 	}
 
@@ -367,7 +367,7 @@ int ieee80211_add_pending_skbs(struct ieee80211_local *local,
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 		if (WARN_ON(!info->control.vif)) {
-			kfree(skb);
+			kfree_skb(skb);
 			continue;
 		}
 
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 7c9ec3dee96e..ca6e68dcd8a8 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/netfilter.h>
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/skbuff.h>
 #include <linux/proc_fs.h>
 #include <linux/vmalloc.h>
diff --git a/net/netfilter/nf_sockopt.c b/net/netfilter/nf_sockopt.c
index 8ab829f86574..f042ae521557 100644
--- a/net/netfilter/nf_sockopt.c
+++ b/net/netfilter/nf_sockopt.c
@@ -113,7 +113,7 @@ static int nf_sockopt(struct sock *sk, u_int8_t pf, int val,
 }
 
 int nf_setsockopt(struct sock *sk, u_int8_t pf, int val, char __user *opt,
-		  int len)
+		  unsigned int len)
 {
 	return nf_sockopt(sk, pf, val, opt, &len, 0);
 }
@@ -154,7 +154,7 @@ static int compat_nf_sockopt(struct sock *sk, u_int8_t pf, int val,
 }
 
 int compat_nf_setsockopt(struct sock *sk, u_int8_t pf,
-		int val, char __user *opt, int len)
+		int val, char __user *opt, unsigned int len)
 {
 	return compat_nf_sockopt(sk, pf, val, opt, &len, 0);
 }
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index a4bafbf15097..19e98007691c 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1150,7 +1150,7 @@ static void netlink_update_socket_mc(struct netlink_sock *nlk,
 }
 
 static int netlink_setsockopt(struct socket *sock, int level, int optname,
-			      char __user *optval, int optlen)
+			      char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct netlink_sock *nlk = nlk_sk(sk);
@@ -1788,7 +1788,7 @@ void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err)
 	}
 
 	rep = __nlmsg_put(skb, NETLINK_CB(in_skb).pid, nlh->nlmsg_seq,
-			  NLMSG_ERROR, sizeof(struct nlmsgerr), 0);
+			  NLMSG_ERROR, payload, 0);
 	errmsg = nlmsg_data(rep);
 	errmsg->error = err;
 	memcpy(&errmsg->msg, nlh, err ? nlh->nlmsg_len : sizeof(*nlh));
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index ce1a34b99c23..7a834952f67f 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -301,7 +301,7 @@ void nr_destroy_socket(struct sock *sk)
  */
 
 static int nr_setsockopt(struct socket *sock, int level, int optname,
-	char __user *optval, int optlen)
+	char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct nr_sock *nr = nr_sk(sk);
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 103d5611b818..d7ecca0a0c07 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1701,7 +1701,7 @@ static void packet_flush_mclist(struct sock *sk)
 }
 
 static int
-packet_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+packet_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct packet_sock *po = pkt_sk(sk);
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index b8252d289cd7..5f32d217535b 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -742,7 +742,7 @@ static int pep_init(struct sock *sk)
 }
 
 static int pep_setsockopt(struct sock *sk, int level, int optname,
-				char __user *optval, int optlen)
+				char __user *optval, unsigned int optlen)
 {
 	struct pep_sock *pn = pep_sk(sk);
 	int val = 0, err = 0;
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index 07aa9f08d5fb..aa5b5a972bff 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -407,7 +407,6 @@ int pn_sock_get_port(struct sock *sk, unsigned short sport)
 	return -EADDRINUSE;
 
 found:
-	mutex_unlock(&port_mutex);
 	pn->sobject = pn_object(pn_addr(pn->sobject), sport);
 	return 0;
 }
diff --git a/net/rds/af_rds.c b/net/rds/af_rds.c
index 6b58aeff4c7a..98e05382fd3c 100644
--- a/net/rds/af_rds.c
+++ b/net/rds/af_rds.c
@@ -248,7 +248,7 @@ static int rds_cong_monitor(struct rds_sock *rs, char __user *optval,
 }
 
 static int rds_setsockopt(struct socket *sock, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	struct rds_sock *rs = rds_sk_to_rs(sock->sk);
 	int ret;
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index dbeaf2983822..ba2efb960c60 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/rfkill.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/miscdevice.h>
 #include <linux/wait.h>
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 1e166c9685aa..502cce76621d 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -370,7 +370,7 @@ void rose_destroy_socket(struct sock *sk)
  */
 
 static int rose_setsockopt(struct socket *sock, int level, int optname,
-	char __user *optval, int optlen)
+	char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct rose_sock *rose = rose_sk(sk);
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index bfe493ebf27c..a86afceaa94f 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -507,7 +507,7 @@ out:
  * set RxRPC socket options
  */
 static int rxrpc_setsockopt(struct socket *sock, int level, int optname,
-			    char __user *optval, int optlen)
+			    char __user *optval, unsigned int optlen)
 {
 	struct rxrpc_sock *rx = rxrpc_sk(sock->sk);
 	unsigned min_sec_level;
diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c
index 96c0ed115e2a..6b0359a500e6 100644
--- a/net/sched/act_pedit.c
+++ b/net/sched/act_pedit.c
@@ -34,7 +34,7 @@ static struct tcf_hashinfo pedit_hash_info = {
 };
 
 static const struct nla_policy pedit_policy[TCA_PEDIT_MAX + 1] = {
-	[TCA_PEDIT_PARMS]	= { .len = sizeof(struct tcf_pedit) },
+	[TCA_PEDIT_PARMS]	= { .len = sizeof(struct tc_pedit) },
 };
 
 static int tcf_pedit_init(struct nlattr *nla, struct nlattr *est,
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 6a536949cdc0..7cf6c0fbc7a6 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -350,7 +350,7 @@ static int tcf_fill_node(struct sk_buff *skb, struct tcf_proto *tp,
 	tcm = NLMSG_DATA(nlh);
 	tcm->tcm_family = AF_UNSPEC;
 	tcm->tcm__pad1 = 0;
-	tcm->tcm__pad1 = 0;
+	tcm->tcm__pad2 = 0;
 	tcm->tcm_ifindex = qdisc_dev(tp->q)->ifindex;
 	tcm->tcm_parent = tp->classid;
 	tcm->tcm_info = TC_H_MAKE(tp->prio, tp->protocol);
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 89af37a6c871..c8d05758661d 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -2027,7 +2027,8 @@ out:
  * instead a error will be indicated to the user.
  */
 static int sctp_setsockopt_disable_fragments(struct sock *sk,
-					    char __user *optval, int optlen)
+					     char __user *optval,
+					     unsigned int optlen)
 {
 	int val;
 
@@ -2043,7 +2044,7 @@ static int sctp_setsockopt_disable_fragments(struct sock *sk,
 }
 
 static int sctp_setsockopt_events(struct sock *sk, char __user *optval,
-					int optlen)
+				  unsigned int optlen)
 {
 	if (optlen > sizeof(struct sctp_event_subscribe))
 		return -EINVAL;
@@ -2064,7 +2065,7 @@ static int sctp_setsockopt_events(struct sock *sk, char __user *optval,
  * association is closed.
  */
 static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval,
-					    int optlen)
+				     unsigned int optlen)
 {
 	struct sctp_sock *sp = sctp_sk(sk);
 
@@ -2318,7 +2319,8 @@ static int sctp_apply_peer_addr_params(struct sctp_paddrparams *params,
 }
 
 static int sctp_setsockopt_peer_addr_params(struct sock *sk,
-					    char __user *optval, int optlen)
+					    char __user *optval,
+					    unsigned int optlen)
 {
 	struct sctp_paddrparams  params;
 	struct sctp_transport   *trans = NULL;
@@ -2430,7 +2432,7 @@ static int sctp_setsockopt_peer_addr_params(struct sock *sk,
  */
 
 static int sctp_setsockopt_delayed_ack(struct sock *sk,
-					    char __user *optval, int optlen)
+				       char __user *optval, unsigned int optlen)
 {
 	struct sctp_sack_info    params;
 	struct sctp_transport   *trans = NULL;
@@ -2546,7 +2548,7 @@ static int sctp_setsockopt_delayed_ack(struct sock *sk,
  * by the change).  With TCP-style sockets, this option is inherited by
  * sockets derived from a listener socket.
  */
-static int sctp_setsockopt_initmsg(struct sock *sk, char __user *optval, int optlen)
+static int sctp_setsockopt_initmsg(struct sock *sk, char __user *optval, unsigned int optlen)
 {
 	struct sctp_initmsg sinit;
 	struct sctp_sock *sp = sctp_sk(sk);
@@ -2583,7 +2585,8 @@ static int sctp_setsockopt_initmsg(struct sock *sk, char __user *optval, int opt
  *   to this call if the caller is using the UDP model.
  */
 static int sctp_setsockopt_default_send_param(struct sock *sk,
-						char __user *optval, int optlen)
+					      char __user *optval,
+					      unsigned int optlen)
 {
 	struct sctp_sndrcvinfo info;
 	struct sctp_association *asoc;
@@ -2622,7 +2625,7 @@ static int sctp_setsockopt_default_send_param(struct sock *sk,
  * association peer's addresses.
  */
 static int sctp_setsockopt_primary_addr(struct sock *sk, char __user *optval,
-					int optlen)
+					unsigned int optlen)
 {
 	struct sctp_prim prim;
 	struct sctp_transport *trans;
@@ -2651,7 +2654,7 @@ static int sctp_setsockopt_primary_addr(struct sock *sk, char __user *optval,
  *  integer boolean flag.
  */
 static int sctp_setsockopt_nodelay(struct sock *sk, char __user *optval,
-					int optlen)
+				   unsigned int optlen)
 {
 	int val;
 
@@ -2676,7 +2679,8 @@ static int sctp_setsockopt_nodelay(struct sock *sk, char __user *optval,
  * be changed.
  *
  */
-static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, int optlen) {
+static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, unsigned int optlen)
+{
 	struct sctp_rtoinfo rtoinfo;
 	struct sctp_association *asoc;
 
@@ -2728,7 +2732,7 @@ static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, int opt
  * See [SCTP] for more information.
  *
  */
-static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, int optlen)
+static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, unsigned int optlen)
 {
 
 	struct sctp_assocparams assocparams;
@@ -2800,7 +2804,7 @@ static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, int o
  * addresses and a user will receive both PF_INET6 and PF_INET type
  * addresses on the socket.
  */
-static int sctp_setsockopt_mappedv4(struct sock *sk, char __user *optval, int optlen)
+static int sctp_setsockopt_mappedv4(struct sock *sk, char __user *optval, unsigned int optlen)
 {
 	int val;
 	struct sctp_sock *sp = sctp_sk(sk);
@@ -2844,7 +2848,7 @@ static int sctp_setsockopt_mappedv4(struct sock *sk, char __user *optval, int op
  *    changed (effecting future associations only).
  * assoc_value:  This parameter specifies the maximum size in bytes.
  */
-static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, int optlen)
+static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, unsigned int optlen)
 {
 	struct sctp_assoc_value params;
 	struct sctp_association *asoc;
@@ -2899,7 +2903,7 @@ static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, int optl
  *   set primary request:
  */
 static int sctp_setsockopt_peer_primary_addr(struct sock *sk, char __user *optval,
-					     int optlen)
+					     unsigned int optlen)
 {
 	struct sctp_sock	*sp;
 	struct sctp_endpoint	*ep;
@@ -2950,7 +2954,7 @@ static int sctp_setsockopt_peer_primary_addr(struct sock *sk, char __user *optva
 }
 
 static int sctp_setsockopt_adaptation_layer(struct sock *sk, char __user *optval,
-					  int optlen)
+					    unsigned int optlen)
 {
 	struct sctp_setadaptation adaptation;
 
@@ -2979,7 +2983,7 @@ static int sctp_setsockopt_adaptation_layer(struct sock *sk, char __user *optval
  * saved with outbound messages.
  */
 static int sctp_setsockopt_context(struct sock *sk, char __user *optval,
-				   int optlen)
+				   unsigned int optlen)
 {
 	struct sctp_assoc_value params;
 	struct sctp_sock *sp;
@@ -3030,7 +3034,7 @@ static int sctp_setsockopt_context(struct sock *sk, char __user *optval,
  */
 static int sctp_setsockopt_fragment_interleave(struct sock *sk,
 					       char __user *optval,
-					       int optlen)
+					       unsigned int optlen)
 {
 	int val;
 
@@ -3063,7 +3067,7 @@ static int sctp_setsockopt_fragment_interleave(struct sock *sk,
  */
 static int sctp_setsockopt_partial_delivery_point(struct sock *sk,
 						  char __user *optval,
-						  int optlen)
+						  unsigned int optlen)
 {
 	u32 val;
 
@@ -3096,7 +3100,7 @@ static int sctp_setsockopt_partial_delivery_point(struct sock *sk,
  */
 static int sctp_setsockopt_maxburst(struct sock *sk,
 				    char __user *optval,
-				    int optlen)
+				    unsigned int optlen)
 {
 	struct sctp_assoc_value params;
 	struct sctp_sock *sp;
@@ -3140,8 +3144,8 @@ static int sctp_setsockopt_maxburst(struct sock *sk,
  * will only effect future associations on the socket.
  */
 static int sctp_setsockopt_auth_chunk(struct sock *sk,
-				    char __user *optval,
-				    int optlen)
+				      char __user *optval,
+				      unsigned int optlen)
 {
 	struct sctp_authchunk val;
 
@@ -3172,8 +3176,8 @@ static int sctp_setsockopt_auth_chunk(struct sock *sk,
  * endpoint requires the peer to use.
  */
 static int sctp_setsockopt_hmac_ident(struct sock *sk,
-				    char __user *optval,
-				    int optlen)
+				      char __user *optval,
+				      unsigned int optlen)
 {
 	struct sctp_hmacalgo *hmacs;
 	u32 idents;
@@ -3215,7 +3219,7 @@ out:
  */
 static int sctp_setsockopt_auth_key(struct sock *sk,
 				    char __user *optval,
-				    int optlen)
+				    unsigned int optlen)
 {
 	struct sctp_authkey *authkey;
 	struct sctp_association *asoc;
@@ -3260,8 +3264,8 @@ out:
  * the association shared key.
  */
 static int sctp_setsockopt_active_key(struct sock *sk,
-					char __user *optval,
-					int optlen)
+				      char __user *optval,
+				      unsigned int optlen)
 {
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
@@ -3288,8 +3292,8 @@ static int sctp_setsockopt_active_key(struct sock *sk,
  * This set option will delete a shared secret key from use.
  */
 static int sctp_setsockopt_del_key(struct sock *sk,
-					char __user *optval,
-					int optlen)
+				   char __user *optval,
+				   unsigned int optlen)
 {
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
@@ -3332,7 +3336,7 @@ static int sctp_setsockopt_del_key(struct sock *sk,
  *   optlen  - the size of the buffer.
  */
 SCTP_STATIC int sctp_setsockopt(struct sock *sk, int level, int optname,
-				char __user *optval, int optlen)
+				char __user *optval, unsigned int optlen)
 {
 	int retval = 0;
 
diff --git a/net/socket.c b/net/socket.c
index 49917a1cac7d..75655365b5fd 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2098,12 +2098,17 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args)
 	unsigned long a[6];
 	unsigned long a0, a1;
 	int err;
+	unsigned int len;
 
 	if (call < 1 || call > SYS_ACCEPT4)
 		return -EINVAL;
 
+	len = nargs[call];
+	if (len > sizeof(a))
+		return -EINVAL;
+
 	/* copy_from_user should be SMP safe. */
-	if (copy_from_user(a, args, nargs[call]))
+	if (copy_from_user(a, args, len))
 		return -EFAULT;
 
 	audit_socketcall(nargs[call] / sizeof(unsigned long), a);
@@ -2386,7 +2391,7 @@ int kernel_getsockopt(struct socket *sock, int level, int optname,
 }
 
 int kernel_setsockopt(struct socket *sock, int level, int optname,
-			char *optval, int optlen)
+			char *optval, unsigned int optlen)
 {
 	mm_segment_t oldfs = get_fs();
 	int err;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 0cf5e8c27a10..3fa5751af0ec 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -42,6 +42,7 @@
 #include <linux/sunrpc/svc_xprt.h>
 #include <linux/sunrpc/debug.h>
 #include <linux/sunrpc/rpc_rdma.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <rdma/ib_verbs.h>
 #include <rdma/rdma_cm.h>
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index e8254e809b79..e6d9abf7440e 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1658,7 +1658,7 @@ restart:
  */
 
 static int setsockopt(struct socket *sock,
-		      int lvl, int opt, char __user *ov, int ol)
+		      int lvl, int opt, char __user *ov, unsigned int ol)
 {
 	struct sock *sk = sock->sk;
 	struct tipc_port *tport = tipc_sk_port(sk);
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 51ab497115eb..fc820cd75453 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1074,6 +1074,8 @@ restart:
 	err = -ECONNREFUSED;
 	if (other->sk_state != TCP_LISTEN)
 		goto out_unlock;
+	if (other->sk_shutdown & RCV_SHUTDOWN)
+		goto out_unlock;
 
 	if (unix_recvq_full(other)) {
 		err = -EAGAIN;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 45b2be3274db..a595f712b5bf 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
+#include <linux/sched.h>
 #include <net/genetlink.h>
 #include <net/cfg80211.h>
 #include "nl80211.h"
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index eddab097435c..ca3c92a0a14f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4029,7 +4029,7 @@ static int nl80211_wiphy_netns(struct sk_buff *skb, struct genl_info *info)
 	rdev = cfg80211_get_dev_from_info(info);
 	if (IS_ERR(rdev)) {
 		err = PTR_ERR(rdev);
-		goto out;
+		goto out_rtnl;
 	}
 
 	net = get_net_ns_by_pid(pid);
@@ -4049,6 +4049,7 @@ static int nl80211_wiphy_netns(struct sk_buff *skb, struct genl_info *info)
 	put_net(net);
  out:
 	cfg80211_unlock_rdev(rdev);
+ out_rtnl:
 	rtnl_unlock();
 	return err;
 }
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 7fae7eee65de..93c3ed329204 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -762,9 +762,8 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev,
 		wdev->conn->params.ssid = wdev->ssid;
 		wdev->conn->params.ssid_len = connect->ssid_len;
 
-		/* don't care about result -- but fill bssid & channel */
-		if (!wdev->conn->params.bssid || !wdev->conn->params.channel)
-			bss = cfg80211_get_conn_bss(wdev);
+		/* see if we have the bss already */
+		bss = cfg80211_get_conn_bss(wdev);
 
 		wdev->sme_state = CFG80211_SME_CONNECTING;
 		wdev->connect_keys = connkeys;
diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c
index bf725275eb8d..5615a8802536 100644
--- a/net/wireless/wext-sme.c
+++ b/net/wireless/wext-sme.c
@@ -30,7 +30,8 @@ int cfg80211_mgd_wext_connect(struct cfg80211_registered_device *rdev,
 	if (wdev->wext.keys) {
 		wdev->wext.keys->def = wdev->wext.default_key;
 		wdev->wext.keys->defmgmt = wdev->wext.default_mgmt_key;
-		wdev->wext.connect.privacy = true;
+		if (wdev->wext.default_key != -1)
+			wdev->wext.connect.privacy = true;
 	}
 
 	if (!wdev->wext.connect.ssid_len)
@@ -229,8 +230,7 @@ int cfg80211_mgd_wext_giwessid(struct net_device *dev,
 		data->flags = 1;
 		data->length = wdev->wext.connect.ssid_len;
 		memcpy(ssid, wdev->wext.connect.ssid, data->length);
-	} else
-		data->flags = 0;
+	}
 	wdev_unlock(wdev);
 
 	return 0;
@@ -306,8 +306,6 @@ int cfg80211_mgd_wext_giwap(struct net_device *dev,
 	wdev_lock(wdev);
 	if (wdev->current_bss)
 		memcpy(ap_addr->sa_data, wdev->current_bss->pub.bssid, ETH_ALEN);
-	else if (wdev->wext.connect.bssid)
-		memcpy(ap_addr->sa_data, wdev->wext.connect.bssid, ETH_ALEN);
 	else
 		memset(ap_addr->sa_data, 0, ETH_ALEN);
 	wdev_unlock(wdev);
diff --git a/net/wireless/wext.c b/net/wireless/wext.c
index 5b4a0cee4418..60fe57761ca9 100644
--- a/net/wireless/wext.c
+++ b/net/wireless/wext.c
@@ -470,7 +470,7 @@ static iw_handler get_handler(struct net_device *dev, unsigned int cmd)
 /*
  * Get statistics out of the driver
  */
-static struct iw_statistics *get_wireless_stats(struct net_device *dev)
+struct iw_statistics *get_wireless_stats(struct net_device *dev)
 {
 	/* New location */
 	if ((dev->wireless_handlers != NULL) &&
@@ -773,10 +773,13 @@ static int ioctl_standard_iw_point(struct iw_point *iwp, unsigned int cmd,
 			essid_compat = 1;
 		else if (IW_IS_SET(cmd) && (iwp->length != 0)) {
 			char essid[IW_ESSID_MAX_SIZE + 1];
+			unsigned int len;
+			len = iwp->length * descr->token_size;
 
-			err = copy_from_user(essid, iwp->pointer,
-					     iwp->length *
-					     descr->token_size);
+			if (len > IW_ESSID_MAX_SIZE)
+				return -EFAULT;
+
+			err = copy_from_user(essid, iwp->pointer, len);
 			if (err)
 				return -EFAULT;
 
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 5e6c072c64d3..7fa9c7ad3d3b 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -409,7 +409,7 @@ static void x25_destroy_socket(struct sock *sk)
  */
 
 static int x25_setsockopt(struct socket *sock, int level, int optname,
-			  char __user *optval, int optlen)
+			  char __user *optval, unsigned int optlen)
 {
 	int opt;
 	struct sock *sk = sock->sk;
diff --git a/samples/tracepoints/tracepoint-sample.c b/samples/tracepoints/tracepoint-sample.c
index 9cf80a11e8b6..26fab33ffa8c 100644
--- a/samples/tracepoints/tracepoint-sample.c
+++ b/samples/tracepoints/tracepoint-sample.c
@@ -28,7 +28,7 @@ static int my_open(struct inode *inode, struct file *file)
 	return -EPERM;
 }
 
-static struct file_operations mark_ops = {
+static const struct file_operations mark_ops = {
 	.open = my_open,
 };
 
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 4f9c1908593b..c67e73ecd5be 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -100,7 +100,7 @@ as-option = $(call try-run,\
 # Usage: cflags-y += $(call as-instr,instr,option1,option2)
 
 as-instr = $(call try-run,\
-	echo -e "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -xassembler -o "$$TMP" -,$(2),$(3))
+	/bin/echo -e "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -xassembler -o "$$TMP" -,$(2),$(3))
 
 # cc-option
 # Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 7a7778746ea6..ffdafb26f539 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -208,7 +208,7 @@ cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) || \
 
 # Bzip2 and LZMA do not include size in file... so we have to fake that;
 # append the size as a 32-bit littleendian number as gzip does.
-size_append = echo -ne $(shell						\
+size_append = /bin/echo -ne $(shell					\
 dec_size=0;								\
 for F in $1; do								\
 	fsize=$$(stat -c "%s" $$F);					\
diff --git a/scripts/checkkconfigsymbols.sh b/scripts/checkkconfigsymbols.sh
index 39677c82747a..46be3c5a62b7 100755
--- a/scripts/checkkconfigsymbols.sh
+++ b/scripts/checkkconfigsymbols.sh
@@ -9,7 +9,7 @@ paths="$@"
 # Doing this once at the beginning saves a lot of time, on a cache-hot tree.
 Kconfigs="`find . -name 'Kconfig' -o -name 'Kconfig*[^~]'`"
 
-echo -e "File list \tundefined symbol used"
+/bin/echo -e "File list \tundefined symbol used"
 find $paths -name '*.[chS]' -o -name 'Makefile' -o -name 'Makefile*[^~]'| while read i
 do
 	# Output the bare Kconfig variable and the filename; the _MODULE part at
@@ -54,6 +54,6 @@ while read symb files; do
 	# beyond the purpose of this script.
 	symb_bare=`echo $symb | sed -e 's/_MODULE//'`
 	if ! grep -q "\<$symb_bare\>" $Kconfigs; then
-		echo -e "$files: \t$symb"
+		/bin/echo -e "$files: \t$symb"
 	fi
 done|sort
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 87bbb8bce9bf..bc4114f1ab30 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2,7 +2,7 @@
 # (c) 2001, Dave Jones. <davej@redhat.com> (the file handling bit)
 # (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit)
 # (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite)
-# (c) 2008, Andy Whitcroft <apw@canonical.com>
+# (c) 2008,2009, Andy Whitcroft <apw@canonical.com>
 # Licensed under the terms of the GNU GPL License version 2
 
 use strict;
@@ -10,7 +10,7 @@ use strict;
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.29';
+my $V = '0.30';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -130,7 +130,10 @@ if ($tree) {
 
 my $emitted_corrupt = 0;
 
-our $Ident       = qr{[A-Za-z_][A-Za-z\d_]*};
+our $Ident	= qr{
+			[A-Za-z_][A-Za-z\d_]*
+			(?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)*
+		}x;
 our $Storage	= qr{extern|static|asmlinkage};
 our $Sparse	= qr{
 			__user|
@@ -997,23 +1000,25 @@ sub annotate_values {
 
 sub possible {
 	my ($possible, $line) = @_;
-
-	print "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
-	if ($possible !~ /(?:
+	my $notPermitted = qr{(?:
 		^(?:
 			$Modifier|
 			$Storage|
 			$Type|
-			DEFINE_\S+|
+			DEFINE_\S+
+		)$|
+		^(?:
 			goto|
 			return|
 			case|
 			else|
 			asm|__asm__|
 			do
-		)$|
+		)(?:\s|$)|
 		^(?:typedef|struct|enum)\b
-	    )/x) {
+	    )}x;
+	warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
+	if ($possible !~ $notPermitted) {
 		# Check for modifiers.
 		$possible =~ s/\s*$Storage\s*//g;
 		$possible =~ s/\s*$Sparse\s*//g;
@@ -1022,8 +1027,10 @@ sub possible {
 		} elsif ($possible =~ /\s/) {
 			$possible =~ s/\s*$Type\s*//g;
 			for my $modifier (split(' ', $possible)) {
-				warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
-				push(@modifierList, $modifier);
+				if ($modifier !~ $notPermitted) {
+					warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
+					push(@modifierList, $modifier);
+				}
 			}
 
 		} else {
@@ -1138,6 +1145,7 @@ sub process {
 	# suppression flags
 	my %suppress_ifbraces;
 	my %suppress_whiletrailers;
+	my %suppress_export;
 
 	# Pre-scan the patch sanitizing the lines.
 	# Pre-scan the patch looking for any __setup documentation.
@@ -1230,7 +1238,6 @@ sub process {
 		$linenr++;
 
 		my $rawline = $rawlines[$linenr - 1];
-		my $hunk_line = ($realcnt != 0);
 
 #extract the line range in the file after the patch is applied
 		if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
@@ -1247,6 +1254,7 @@ sub process {
 
 			%suppress_ifbraces = ();
 			%suppress_whiletrailers = ();
+			%suppress_export = ();
 			next;
 
 # track the line number as we move through the hunk, note that
@@ -1270,6 +1278,8 @@ sub process {
 			$realcnt--;
 		}
 
+		my $hunk_line = ($realcnt != 0);
+
 #make up the handle for any error we report on this line
 		$prefix = "$filename:$realline: " if ($emacs && $file);
 		$prefix = "$filename:$linenr: " if ($emacs && !$file);
@@ -1420,13 +1430,22 @@ sub process {
 		}
 
 # Check for potential 'bare' types
-		my ($stat, $cond, $line_nr_next, $remain_next, $off_next);
+		my ($stat, $cond, $line_nr_next, $remain_next, $off_next,
+		    $realline_next);
 		if ($realcnt && $line =~ /.\s*\S/) {
 			($stat, $cond, $line_nr_next, $remain_next, $off_next) =
 				ctx_statement_block($linenr, $realcnt, 0);
 			$stat =~ s/\n./\n /g;
 			$cond =~ s/\n./\n /g;
 
+			# Find the real next line.
+			$realline_next = $line_nr_next;
+			if (defined $realline_next &&
+			    (!defined $lines[$realline_next - 1] ||
+			     substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) {
+				$realline_next++;
+			}
+
 			my $s = $stat;
 			$s =~ s/{.*$//s;
 
@@ -1661,8 +1680,8 @@ sub process {
 		}
 
 # check for initialisation to aggregates open brace on the next line
-		if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ &&
-		    $line =~ /^.\s*{/) {
+		if ($line =~ /^.\s*{/ &&
+		    $prevline =~ /(?:^|[^=])=\s*$/) {
 			ERROR("that open brace { should be on the previous line\n" . $hereprev);
 		}
 
@@ -1687,21 +1706,40 @@ sub process {
 		$line =~ s@//.*@@;
 		$opline =~ s@//.*@@;
 
-#EXPORT_SYMBOL should immediately follow its function closing }.
-		if (($line =~ /EXPORT_SYMBOL.*\((.*)\)/) ||
-		    ($line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
+# EXPORT_SYMBOL should immediately follow the thing it is exporting, consider
+# the whole statement.
+#print "APW <$lines[$realline_next - 1]>\n";
+		if (defined $realline_next &&
+		    exists $lines[$realline_next - 1] &&
+		    !defined $suppress_export{$realline_next} &&
+		    ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
+		     $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
 			my $name = $1;
-			if ($prevline !~ /(?:
-				^.}|
+			if ($stat !~ /(?:
+				\n.}\s*$|
 				^.DEFINE_$Ident\(\Q$name\E\)|
 				^.DECLARE_$Ident\(\Q$name\E\)|
 				^.LIST_HEAD\(\Q$name\E\)|
-				^.$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
-				\b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[)
+				^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
+				\b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\()
 			    )/x) {
-				WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
+#print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n";
+				$suppress_export{$realline_next} = 2;
+			} else {
+				$suppress_export{$realline_next} = 1;
 			}
 		}
+		if (!defined $suppress_export{$linenr} &&
+		    $prevline =~ /^.\s*$/ &&
+		    ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
+		     $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
+#print "FOO B <$lines[$linenr - 1]>\n";
+			$suppress_export{$linenr} = 2;
+		}
+		if (defined $suppress_export{$linenr} &&
+		    $suppress_export{$linenr} == 2) {
+			WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
+		}
 
 # check for external initialisers.
 		if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index cdb44b63342e..102b76608f35 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
 use strict;
 
 my $P = $0;
-my $V = '0.20';
+my $V = '0.21';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -37,6 +37,7 @@ my $scm = 0;
 my $web = 0;
 my $subsystem = 0;
 my $status = 0;
+my $keywords = 1;
 my $from_filename = 0;
 my $pattern_depth = 0;
 my $version = 0;
@@ -84,6 +85,7 @@ if (!GetOptions(
 		'scm!' => \$scm,
 		'web!' => \$web,
 		'pattern-depth=i' => \$pattern_depth,
+		'k|keywords!' => \$keywords,
 		'f|file' => \$from_filename,
 		'v|version' => \$version,
 		'h|help' => \$help,
@@ -132,6 +134,8 @@ if (!top_of_kernel_tree($lk_path)) {
 ## Read MAINTAINERS for type/value pairs
 
 my @typevalue = ();
+my %keyword_hash;
+
 open(MAINT, "<${lk_path}MAINTAINERS") || die "$P: Can't open MAINTAINERS\n";
 while (<MAINT>) {
     my $line = $_;
@@ -149,6 +153,8 @@ while (<MAINT>) {
 	    if ((-d $value)) {
 		$value =~ s@([^/])$@$1/@;
 	    }
+	} elsif ($type eq "K") {
+	    $keyword_hash{@typevalue} = $value;
 	}
 	push(@typevalue, "$type:$value");
     } elsif (!/^(\s)*$/) {
@@ -188,6 +194,7 @@ if ($email_remove_duplicates) {
 
 my @files = ();
 my @range = ();
+my @keyword_tvi = ();
 
 foreach my $file (@ARGV) {
     ##if $file is a directory and it lacks a trailing slash, add one
@@ -198,11 +205,24 @@ foreach my $file (@ARGV) {
     }
     if ($from_filename) {
 	push(@files, $file);
+	if (-f $file && $keywords) {
+	    open(FILE, "<$file") or die "$P: Can't open ${file}\n";
+	    while (<FILE>) {
+		my $patch_line = $_;
+		foreach my $line (keys %keyword_hash) {
+		    if ($patch_line =~ m/^.*$keyword_hash{$line}/x) {
+			push(@keyword_tvi, $line);
+		    }
+		}
+	    }
+	    close(FILE);
+	}
     } else {
 	my $file_cnt = @files;
 	my $lastfile;
 	open(PATCH, "<$file") or die "$P: Can't open ${file}\n";
 	while (<PATCH>) {
+	    my $patch_line = $_;
 	    if (m/^\+\+\+\s+(\S+)/) {
 		my $filename = $1;
 		$filename =~ s@^[^/]*/@@;
@@ -213,6 +233,12 @@ foreach my $file (@ARGV) {
 		if ($email_git_blame) {
 		    push(@range, "$lastfile:$1:$2");
 		}
+	    } elsif ($keywords) {
+		foreach my $line (keys %keyword_hash) {
+		    if ($patch_line =~ m/^[+-].*$keyword_hash{$line}/x) {
+			push(@keyword_tvi, $line);
+		    }
+		}
 	    }
 	}
 	close(PATCH);
@@ -286,6 +312,13 @@ foreach my $file (@files) {
     }
 }
 
+if ($keywords) {
+    @keyword_tvi = sort_and_uniq(@keyword_tvi);
+    foreach my $line (@keyword_tvi) {
+	add_categories($line);
+    }
+}
+
 if ($email) {
     foreach my $chief (@penguin_chief) {
 	if ($chief =~ m/^(.*):(.*)/) {
@@ -384,6 +417,7 @@ Output type options:
 
 Other options:
   --pattern-depth => Number of pattern directory traversals (default: 0 (all))
+  --keywords => scan patch for keywords (default: 1 (on))
   --version => show version
   --help => show this help information
 
@@ -486,7 +520,6 @@ sub format_email {
 }
 
 sub find_starting_index {
-
     my ($index) = @_;
 
     while ($index > 0) {
diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl
index c6ae4052ab43..b89ca2c58fdb 100644
--- a/scripts/headers_install.pl
+++ b/scripts/headers_install.pl
@@ -20,7 +20,7 @@ use strict;
 
 my ($readdir, $installdir, $arch, @files) = @ARGV;
 
-my $unifdef = "scripts/unifdef -U__KERNEL__";
+my $unifdef = "scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__";
 
 foreach my $file (@files) {
 	local *INFILE;
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 6a12dd9f1181..bce3d0fe6fbd 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -1,3 +1,5 @@
+#!/bin/sh
+
 TARGET=$1
 ARCH=$2
 SMP=$3
@@ -50,7 +52,7 @@ UTS_VERSION="$UTS_VERSION $CONFIG_FLAGS $TIMESTAMP"
 # Truncate to maximum length
 
 UTS_LEN=64
-UTS_TRUNCATE="sed -e s/\(.\{1,$UTS_LEN\}\).*/\1/"
+UTS_TRUNCATE="cut -b -$UTS_LEN"
 
 # Generate a temporary compile.h
 
@@ -66,9 +68,13 @@ UTS_TRUNCATE="sed -e s/\(.\{1,$UTS_LEN\}\).*/\1/"
   echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\"
 
   if [ -x /bin/dnsdomainname ]; then
-    echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname | $UTS_TRUNCATE`\"
+    domain=`dnsdomainname 2> /dev/null`
   elif [ -x /bin/domainname ]; then
-    echo \#define LINUX_COMPILE_DOMAIN \"`domainname | $UTS_TRUNCATE`\"
+    domain=`domainname 2> /dev/null`
+  fi
+
+  if [ -n "$domain" ]; then
+    echo \#define LINUX_COMPILE_DOMAIN \"`echo $domain | $UTS_TRUNCATE`\"
   else
     echo \#define LINUX_COMPILE_DOMAIN
   fi
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index fa4a0a17b7e0..f67cc885c807 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -18,6 +18,9 @@
 # e) generate the rpm files, based on kernel.spec
 # - Use /. to avoid tar packing just the symlink
 
+# Note that the rpm-pkg target cannot be used with KBUILD_OUTPUT,
+# but the binrpm-pkg target can; for some reason O= gets ignored.
+
 # Do we have rpmbuild, otherwise fall back to the older rpm
 RPM := $(shell if [ -x "/usr/bin/rpmbuild" ]; then echo rpmbuild; \
 	           else echo rpm; fi)
@@ -33,6 +36,12 @@ $(objtree)/kernel.spec: $(MKSPEC) $(srctree)/Makefile
 	$(CONFIG_SHELL) $(MKSPEC) > $@
 
 rpm-pkg rpm: $(objtree)/kernel.spec FORCE
+	@if test -n "$(KBUILD_OUTPUT)"; then \
+		echo "Building source + binary RPM is not possible outside the"; \
+		echo "kernel source tree. Don't set KBUILD_OUTPUT, or use the"; \
+		echo "binrpm-pkg target instead."; \
+		false; \
+	fi
 	$(MAKE) clean
 	$(PREV) ln -sf $(srctree) $(KERNELPATH)
 	$(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
@@ -61,7 +70,7 @@ binrpm-pkg: $(objtree)/binkernel.spec FORCE
 	set -e; \
 	mv -f $(objtree)/.tmp_version $(objtree)/.version
 
-	$(RPM) $(RPMOPTS) --define "_builddir $(srctree)" --target \
+	$(RPM) $(RPMOPTS) --define "_builddir $(objtree)" --target \
 		$(UTS_MACHINE) -bb $<
 
 clean-files += $(objtree)/binkernel.spec
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index 3d93f8c81252..47bdd2f99b78 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -70,7 +70,7 @@ echo 'mkdir -p $RPM_BUILD_ROOT/boot $RPM_BUILD_ROOT/lib/modules'
 echo 'mkdir -p $RPM_BUILD_ROOT/lib/firmware'
 echo "%endif"
 
-echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} modules_install'
+echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} KBUILD_SRC= modules_install'
 echo "%ifarch ia64"
 echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/efi/vmlinuz-$KERNELRELEASE"
 echo 'ln -s '"efi/vmlinuz-$KERNELRELEASE" '$RPM_BUILD_ROOT'"/boot/"
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index 8e9777b76405..0c72c9c38956 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -43,7 +43,7 @@ static ssize_t ima_show_htable_violations(struct file *filp,
 	return ima_show_htable_value(buf, count, ppos, &ima_htable.violations);
 }
 
-static struct file_operations ima_htable_violations_ops = {
+static const struct file_operations ima_htable_violations_ops = {
 	.read = ima_show_htable_violations
 };
 
@@ -55,7 +55,7 @@ static ssize_t ima_show_measurements_count(struct file *filp,
 
 }
 
-static struct file_operations ima_measurements_count_ops = {
+static const struct file_operations ima_measurements_count_ops = {
 	.read = ima_show_measurements_count
 };
 
@@ -158,7 +158,7 @@ static int ima_measurements_open(struct inode *inode, struct file *file)
 	return seq_open(file, &ima_measurments_seqops);
 }
 
-static struct file_operations ima_measurements_ops = {
+static const struct file_operations ima_measurements_ops = {
 	.open = ima_measurements_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -233,7 +233,7 @@ static int ima_ascii_measurements_open(struct inode *inode, struct file *file)
 	return seq_open(file, &ima_ascii_measurements_seqops);
 }
 
-static struct file_operations ima_ascii_measurements_ops = {
+static const struct file_operations ima_ascii_measurements_ops = {
 	.open = ima_ascii_measurements_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -313,7 +313,7 @@ static int ima_release_policy(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct file_operations ima_measure_policy_ops = {
+static const struct file_operations ima_measure_policy_ops = {
 	.open = ima_open_policy,
 	.write = ima_write_policy,
 	.release = ima_release_policy
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 2fb28efc5326..06ec722897be 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -873,7 +873,7 @@ static long get_instantiation_keyring(key_serial_t ringid,
 	/* otherwise specify the destination keyring recorded in the
 	 * authorisation key (any KEY_SPEC_*_KEYRING) */
 	if (ringid >= KEY_SPEC_REQUESTOR_KEYRING) {
-		*_dest_keyring = rka->dest_keyring;
+		*_dest_keyring = key_get(rka->dest_keyring);
 		return 0;
 	}
 
diff --git a/sound/aoa/codecs/tas.c b/sound/aoa/codecs/tas.c
index f0ebc971c686..1dd66ddffcaf 100644
--- a/sound/aoa/codecs/tas.c
+++ b/sound/aoa/codecs/tas.c
@@ -897,6 +897,15 @@ static int tas_create(struct i2c_adapter *adapter,
 	client = i2c_new_device(adapter, &info);
 	if (!client)
 		return -ENODEV;
+	/*
+	 * We know the driver is already loaded, so the device should be
+	 * already bound. If not it means binding failed, and then there
+	 * is no point in keeping the device instantiated.
+	 */
+	if (!client->driver) {
+		i2c_unregister_device(client);
+		return -ENODEV;
+	}
 
 	/*
 	 * Let i2c-core delete that device on driver removal.
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index dc78272fc39f..1f0f8213e2d5 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -937,6 +937,7 @@ static int __devinit aaci_probe_ac97(struct aaci *aaci)
 	struct snd_ac97 *ac97;
 	int ret;
 
+	writel(0, aaci->base + AC97_POWERDOWN);
 	/*
 	 * Assert AACIRESET for 2us
 	 */
diff --git a/sound/drivers/opl3/opl3_midi.c b/sound/drivers/opl3/opl3_midi.c
index 6e7d09ae0e82..7d722a025d0d 100644
--- a/sound/drivers/opl3/opl3_midi.c
+++ b/sound/drivers/opl3/opl3_midi.c
@@ -29,6 +29,8 @@ extern char snd_opl3_regmap[MAX_OPL2_VOICES][4];
 
 extern int use_internal_drums;
 
+static void snd_opl3_note_off_unsafe(void *p, int note, int vel,
+				     struct snd_midi_channel *chan);
 /*
  * The next table looks magical, but it certainly is not. Its values have
  * been calculated as table[i]=8*log(i/64)/log(2) with an obvious exception
@@ -242,16 +244,20 @@ void snd_opl3_timer_func(unsigned long data)
 	int again = 0;
 	int i;
 
-	spin_lock_irqsave(&opl3->sys_timer_lock, flags);
+	spin_lock_irqsave(&opl3->voice_lock, flags);
 	for (i = 0; i < opl3->max_voices; i++) {
 		struct snd_opl3_voice *vp = &opl3->voices[i];
 		if (vp->state > 0 && vp->note_off_check) {
 			if (vp->note_off == jiffies)
-				snd_opl3_note_off(opl3, vp->note, 0, vp->chan);
+				snd_opl3_note_off_unsafe(opl3, vp->note, 0,
+							 vp->chan);
 			else
 				again++;
 		}
 	}
+	spin_unlock_irqrestore(&opl3->voice_lock, flags);
+
+	spin_lock_irqsave(&opl3->sys_timer_lock, flags);
 	if (again) {
 		opl3->tlist.expires = jiffies + 1;	/* invoke again */
 		add_timer(&opl3->tlist);
@@ -658,15 +664,14 @@ static void snd_opl3_kill_voice(struct snd_opl3 *opl3, int voice)
 /*
  * Release a note in response to a midi note off.
  */
-void snd_opl3_note_off(void *p, int note, int vel, struct snd_midi_channel *chan)
+static void snd_opl3_note_off_unsafe(void *p, int note, int vel,
+				     struct snd_midi_channel *chan)
 {
   	struct snd_opl3 *opl3;
 
 	int voice;
 	struct snd_opl3_voice *vp;
 
-	unsigned long flags;
-
 	opl3 = p;
 
 #ifdef DEBUG_MIDI
@@ -674,12 +679,9 @@ void snd_opl3_note_off(void *p, int note, int vel, struct snd_midi_channel *chan
 		   chan->number, chan->midi_program, note);
 #endif
 
-	spin_lock_irqsave(&opl3->voice_lock, flags);
-
 	if (opl3->synth_mode == SNDRV_OPL3_MODE_SEQ) {
 		if (chan->drum_channel && use_internal_drums) {
 			snd_opl3_drum_switch(opl3, note, vel, 0, chan);
-			spin_unlock_irqrestore(&opl3->voice_lock, flags);
 			return;
 		}
 		/* this loop will hopefully kill all extra voices, because
@@ -697,6 +699,16 @@ void snd_opl3_note_off(void *p, int note, int vel, struct snd_midi_channel *chan
 			snd_opl3_kill_voice(opl3, voice);
 		}
 	}
+}
+
+void snd_opl3_note_off(void *p, int note, int vel,
+		       struct snd_midi_channel *chan)
+{
+	struct snd_opl3 *opl3 = p;
+	unsigned long flags;
+
+	spin_lock_irqsave(&opl3->voice_lock, flags);
+	snd_opl3_note_off_unsafe(p, note, vel, chan);
 	spin_unlock_irqrestore(&opl3->voice_lock, flags);
 }
 
diff --git a/sound/mips/hal2.c b/sound/mips/hal2.c
index c52691c2fc46..9a88cdfd952a 100644
--- a/sound/mips/hal2.c
+++ b/sound/mips/hal2.c
@@ -915,7 +915,7 @@ static int __devinit hal2_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __exit hal2_remove(struct platform_device *pdev)
+static int __devexit hal2_remove(struct platform_device *pdev)
 {
 	struct snd_card *card = platform_get_drvdata(pdev);
 
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
index e497525bc11b..8691f4cf6191 100644
--- a/sound/mips/sgio2audio.c
+++ b/sound/mips/sgio2audio.c
@@ -973,7 +973,7 @@ static int __devinit snd_sgio2audio_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __exit snd_sgio2audio_remove(struct platform_device *pdev)
+static int __devexit snd_sgio2audio_remove(struct platform_device *pdev)
 {
 	struct snd_card *card = platform_get_drvdata(pdev);
 
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 24585c6c6d01..4e2b925a94cc 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -808,6 +808,8 @@ static struct pci_device_id snd_bt87x_ids[] = {
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1002, 0x0001, GENERIC),
 	/* Leadtek Winfast tv 2000xp delux */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, GENERIC),
+	/* Pinnacle PCTV */
+	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x11bd, 0x0012, GENERIC),
 	/* Voodoo TV 200 */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x121a, 0x3000, GENERIC),
 	/* Askey Computer Corp. MagicTView'99 */
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index b1b3a644f738..75454648d50c 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -1037,7 +1037,7 @@ static int atc_line_front_unmute(struct ct_atc *atc, unsigned char state)
 
 static int atc_line_surround_unmute(struct ct_atc *atc, unsigned char state)
 {
-	return atc_daio_unmute(atc, state, LINEO4);
+	return atc_daio_unmute(atc, state, LINEO2);
 }
 
 static int atc_line_clfe_unmute(struct ct_atc *atc, unsigned char state)
@@ -1047,7 +1047,7 @@ static int atc_line_clfe_unmute(struct ct_atc *atc, unsigned char state)
 
 static int atc_line_rear_unmute(struct ct_atc *atc, unsigned char state)
 {
-	return atc_daio_unmute(atc, state, LINEO2);
+	return atc_daio_unmute(atc, state, LINEO4);
 }
 
 static int atc_line_in_unmute(struct ct_atc *atc, unsigned char state)
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
index da2065cd2c0d..1305f7ca02c3 100644
--- a/sound/pci/echoaudio/echoaudio.c
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -950,7 +950,7 @@ static int __devinit snd_echo_new_pcm(struct echoaudio *chip)
 	Control interface
 ******************************************************************************/
 
-#ifndef ECHOCARD_HAS_VMIXER
+#if !defined(ECHOCARD_HAS_VMIXER) || defined(ECHOCARD_HAS_LINE_OUT_GAIN)
 
 /******************* PCM output volume *******************/
 static int snd_echo_output_gain_info(struct snd_kcontrol *kcontrol,
@@ -1003,6 +1003,19 @@ static int snd_echo_output_gain_put(struct snd_kcontrol *kcontrol,
 	return changed;
 }
 
+#ifdef ECHOCARD_HAS_LINE_OUT_GAIN
+/* On the Mia this one controls the line-out volume */
+static struct snd_kcontrol_new snd_echo_line_output_gain __devinitdata = {
+	.name = "Line Playback Volume",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+		  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.info = snd_echo_output_gain_info,
+	.get = snd_echo_output_gain_get,
+	.put = snd_echo_output_gain_put,
+	.tlv = {.p = db_scale_output_gain},
+};
+#else
 static struct snd_kcontrol_new snd_echo_pcm_output_gain __devinitdata = {
 	.name = "PCM Playback Volume",
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -1012,9 +1025,10 @@ static struct snd_kcontrol_new snd_echo_pcm_output_gain __devinitdata = {
 	.put = snd_echo_output_gain_put,
 	.tlv = {.p = db_scale_output_gain},
 };
-
 #endif
 
+#endif /* !ECHOCARD_HAS_VMIXER || ECHOCARD_HAS_LINE_OUT_GAIN */
+
 
 
 #ifdef ECHOCARD_HAS_INPUT_GAIN
@@ -2030,10 +2044,18 @@ static int __devinit snd_echo_probe(struct pci_dev *pci,
 	snd_echo_vmixer.count = num_pipes_out(chip) * num_busses_out(chip);
 	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_vmixer, chip))) < 0)
 		goto ctl_error;
-#else
-	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_pcm_output_gain, chip))) < 0)
+#ifdef ECHOCARD_HAS_LINE_OUT_GAIN
+	err = snd_ctl_add(chip->card,
+			  snd_ctl_new1(&snd_echo_line_output_gain, chip));
+	if (err < 0)
 		goto ctl_error;
 #endif
+#else /* ECHOCARD_HAS_VMIXER */
+	err = snd_ctl_add(chip->card,
+			  snd_ctl_new1(&snd_echo_pcm_output_gain, chip));
+	if (err < 0)
+		goto ctl_error;
+#endif /* ECHOCARD_HAS_VMIXER */
 
 #ifdef ECHOCARD_HAS_INPUT_GAIN
 	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_line_input_gain, chip))) < 0)
diff --git a/sound/pci/echoaudio/mia.c b/sound/pci/echoaudio/mia.c
index f3b9b45c9c1b..f05c8c097aa8 100644
--- a/sound/pci/echoaudio/mia.c
+++ b/sound/pci/echoaudio/mia.c
@@ -29,6 +29,7 @@
 #define ECHOCARD_HAS_ADAT	FALSE
 #define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
 #define ECHOCARD_HAS_MIDI
+#define ECHOCARD_HAS_LINE_OUT_GAIN
 
 /* Pipe indexes */
 #define PX_ANALOG_OUT	0	/* 8 */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 20a66f85f0a4..c9ad182e1b4b 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2303,6 +2303,7 @@ static void __devinit check_probe_mask(struct azx *chip, int dev)
  * white-list for enable_msi
  */
 static struct snd_pci_quirk msi_white_list[] __devinitdata = {
+	SND_PCI_QUIRK(0x103c, 0x30f7, "HP Pavilion dv4t-1300", 1),
 	SND_PCI_QUIRK(0x103c, 0x3607, "HP Compa CQ40", 1),
 	{}
 };
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 215e72a87113..2d603f6aba63 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -4032,6 +4032,127 @@ static int ad1984a_thinkpad_init(struct hda_codec *codec)
 }
 
 /*
+ * HP Touchsmart
+ * port-A (0x11)      - front hp-out
+ * port-B (0x14)      - unused
+ * port-C (0x15)      - unused
+ * port-D (0x12)      - rear line out
+ * port-E (0x1c)      - front mic-in
+ * port-F (0x16)      - Internal speakers
+ * digital-mic (0x17) - Internal mic
+ */
+
+static struct hda_verb ad1984a_touchsmart_verbs[] = {
+	/* DACs; unmute as default */
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+	/* Port-A (HP) mixer - route only from analog mixer */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	/* Port-A pin */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Port-A (HP) pin - always unmuted */
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Port-E (int speaker) mixer - route only from analog mixer */
+	{0x25, AC_VERB_SET_AMP_GAIN_MUTE, 0x03},
+	/* Port-E pin */
+	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	/* Port-F (int speaker) mixer - route only from analog mixer */
+	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	/* Port-F pin */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* Analog mixer; mute as default */
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+	/* Analog Mix output amp */
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* capture sources */
+	/* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x0},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* unsolicited event for pin-sense */
+	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+	{0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+	/* allow to touch GPIO1 (for mute control) */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
+	/* internal mic - dmic */
+	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* set magic COEFs for dmic */
+	{0x01, AC_VERB_SET_COEF_INDEX, 0x13f7},
+	{0x01, AC_VERB_SET_PROC_COEF, 0x08},
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new ad1984a_touchsmart_mixers[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
+/*	HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.info = snd_hda_mixer_amp_switch_info,
+		.get = snd_hda_mixer_amp_switch_get,
+		.put = ad1884a_mobile_master_sw_put,
+		.private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+	},
+	HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
+	HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
+	HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x25, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Internal Mic Boost", 0x17, 0x0, HDA_INPUT),
+	{ } /* end */
+};
+
+/* switch to external mic if plugged */
+static void ad1984a_touchsmart_automic(struct hda_codec *codec)
+{
+	if (snd_hda_codec_read(codec, 0x1c, 0,
+				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000) {
+		snd_hda_codec_write(codec, 0x0c, 0,
+				     AC_VERB_SET_CONNECT_SEL, 0x4);
+	} else {
+		snd_hda_codec_write(codec, 0x0c, 0,
+				     AC_VERB_SET_CONNECT_SEL, 0x5);
+	}
+}
+
+
+/* unsolicited event for HP jack sensing */
+static void ad1984a_touchsmart_unsol_event(struct hda_codec *codec,
+	unsigned int res)
+{
+	switch (res >> 26) {
+	case AD1884A_HP_EVENT:
+		ad1884a_hp_automute(codec);
+		break;
+	case AD1884A_MIC_EVENT:
+		ad1984a_touchsmart_automic(codec);
+		break;
+	}
+}
+
+/* initialize jack-sensing, too */
+static int ad1984a_touchsmart_init(struct hda_codec *codec)
+{
+	ad198x_init(codec);
+	ad1884a_hp_automute(codec);
+	ad1984a_touchsmart_automic(codec);
+	return 0;
+}
+
+
+/*
  */
 
 enum {
@@ -4039,6 +4160,7 @@ enum {
 	AD1884A_LAPTOP,
 	AD1884A_MOBILE,
 	AD1884A_THINKPAD,
+	AD1984A_TOUCHSMART,
 	AD1884A_MODELS
 };
 
@@ -4047,6 +4169,7 @@ static const char *ad1884a_models[AD1884A_MODELS] = {
 	[AD1884A_LAPTOP]	= "laptop",
 	[AD1884A_MOBILE]	= "mobile",
 	[AD1884A_THINKPAD]	= "thinkpad",
+	[AD1984A_TOUCHSMART]	= "touchsmart",
 };
 
 static struct snd_pci_quirk ad1884a_cfg_tbl[] = {
@@ -4059,6 +4182,7 @@ static struct snd_pci_quirk ad1884a_cfg_tbl[] = {
 	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP),
 	SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x7010, "HP laptop", AD1884A_MOBILE),
 	SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
+	SND_PCI_QUIRK(0x103c, 0x2a82, "Touchsmart", AD1984A_TOUCHSMART),
 	{}
 };
 
@@ -4142,6 +4266,21 @@ static int patch_ad1884a(struct hda_codec *codec)
 		codec->patch_ops.unsol_event = ad1984a_thinkpad_unsol_event;
 		codec->patch_ops.init = ad1984a_thinkpad_init;
 		break;
+	case AD1984A_TOUCHSMART:
+		spec->mixers[0] = ad1984a_touchsmart_mixers;
+		spec->init_verbs[0] = ad1984a_touchsmart_verbs;
+		spec->multiout.dig_out_nid = 0;
+		codec->patch_ops.unsol_event = ad1984a_touchsmart_unsol_event;
+		codec->patch_ops.init = ad1984a_touchsmart_init;
+		/* set the upper-limit for mixer amp to 0dB for avoiding the
+		 * possible damage by overloading
+		 */
+		snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT,
+					  (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+					  (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+					  (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+					  (1 << AC_AMPCAP_MUTE_SHIFT));
+		break;
 	}
 
 	return 0;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 9d899eda44d7..3fbbc8c01e70 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -682,11 +682,13 @@ static struct hda_input_mux cxt5045_capture_source = {
 };
 
 static struct hda_input_mux cxt5045_capture_source_benq = {
-	.num_items = 3,
+	.num_items = 5,
 	.items = {
 		{ "IntMic", 0x1 },
 		{ "ExtMic", 0x2 },
 		{ "LineIn", 0x3 },
+		{ "CD",     0x4 },
+		{ "Mixer",  0x0 },
 	}
 };
 
@@ -811,11 +813,19 @@ static struct snd_kcontrol_new cxt5045_mixers[] = {
 };
 
 static struct snd_kcontrol_new cxt5045_benq_mixers[] = {
+	HDA_CODEC_VOLUME("CD Capture Volume", 0x1a, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Capture Switch", 0x1a, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x17, 0x4, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x17, 0x4, HDA_INPUT),
+
 	HDA_CODEC_VOLUME("Line In Capture Volume", 0x1a, 0x03, HDA_INPUT),
 	HDA_CODEC_MUTE("Line In Capture Switch", 0x1a, 0x03, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line In Playback Volume", 0x17, 0x3, HDA_INPUT),
 	HDA_CODEC_MUTE("Line In Playback Switch", 0x17, 0x3, HDA_INPUT),
 
+	HDA_CODEC_VOLUME("Mixer Capture Volume", 0x1a, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mixer Capture Switch", 0x1a, 0x0, HDA_INPUT),
+
 	{}
 };
 
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index c8435c9a97f9..9fb60276f5c9 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -29,6 +29,9 @@
 #include "hda_codec.h"
 #include "hda_local.h"
 
+/* define below to restrict the supported rates and formats */
+/* #define LIMITED_RATE_FMT_SUPPORT */
+
 struct nvhdmi_spec {
 	struct hda_multi_out multiout;
 
@@ -60,6 +63,22 @@ static struct hda_verb nvhdmi_basic_init[] = {
 	{} /* terminator */
 };
 
+#ifdef LIMITED_RATE_FMT_SUPPORT
+/* support only the safe format and rate */
+#define SUPPORTED_RATES		SNDRV_PCM_RATE_48000
+#define SUPPORTED_MAXBPS	16
+#define SUPPORTED_FORMATS	SNDRV_PCM_FMTBIT_S16_LE
+#else
+/* support all rates and formats */
+#define SUPPORTED_RATES \
+	(SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+	SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\
+	 SNDRV_PCM_RATE_192000)
+#define SUPPORTED_MAXBPS	24
+#define SUPPORTED_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+#endif
+
 /*
  * Controls
  */
@@ -258,9 +277,9 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = {
 	.channels_min = 2,
 	.channels_max = 8,
 	.nid = Nv_Master_Convert_nid,
-	.rates = SNDRV_PCM_RATE_48000,
-	.maxbps = 16,
-	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	.rates = SUPPORTED_RATES,
+	.maxbps = SUPPORTED_MAXBPS,
+	.formats = SUPPORTED_FORMATS,
 	.ops = {
 		.open = nvhdmi_dig_playback_pcm_open,
 		.close = nvhdmi_dig_playback_pcm_close_8ch,
@@ -273,9 +292,9 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = {
 	.channels_min = 2,
 	.channels_max = 2,
 	.nid = Nv_Master_Convert_nid,
-	.rates = SNDRV_PCM_RATE_48000,
-	.maxbps = 16,
-	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	.rates = SUPPORTED_RATES,
+	.maxbps = SUPPORTED_MAXBPS,
+	.formats = SUPPORTED_FORMATS,
 	.ops = {
 		.open = nvhdmi_dig_playback_pcm_open,
 		.close = nvhdmi_dig_playback_pcm_close_2ch,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 129605819560..c08ca660daba 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -275,7 +275,7 @@ struct alc_spec {
 	struct snd_kcontrol_new *cap_mixer;	/* capture mixer */
 	unsigned int beep_amp;	/* beep amp value, set via set_beep_amp() */
 
-	const struct hda_verb *init_verbs[5];	/* initialization verbs
+	const struct hda_verb *init_verbs[10];	/* initialization verbs
 						 * don't forget NULL
 						 * termination!
 						 */
@@ -1332,15 +1332,20 @@ do_sku:
 	 *	        when the external headphone out jack is plugged"
 	 */
 	if (!spec->autocfg.hp_pins[0]) {
+		hda_nid_t nid;
 		tmp = (ass >> 11) & 0x3;	/* HP to chassis */
 		if (tmp == 0)
-			spec->autocfg.hp_pins[0] = porta;
+			nid = porta;
 		else if (tmp == 1)
-			spec->autocfg.hp_pins[0] = porte;
+			nid = porte;
 		else if (tmp == 2)
-			spec->autocfg.hp_pins[0] = portd;
+			nid = portd;
 		else
 			return 1;
+		for (i = 0; i < spec->autocfg.line_outs; i++)
+			if (spec->autocfg.line_out_pins[i] == nid)
+				return 1;
+		spec->autocfg.hp_pins[0] = nid;
 	}
 
 	alc_init_auto_hp(codec);
@@ -1362,7 +1367,7 @@ static void alc_ssid_check(struct hda_codec *codec,
 }
 
 /*
- * Fix-up pin default configurations
+ * Fix-up pin default configurations and add default verbs
  */
 
 struct alc_pincfg {
@@ -1370,9 +1375,14 @@ struct alc_pincfg {
 	u32 val;
 };
 
-static void alc_fix_pincfg(struct hda_codec *codec,
+struct alc_fixup {
+	const struct alc_pincfg *pins;
+	const struct hda_verb *verbs;
+};
+
+static void alc_pick_fixup(struct hda_codec *codec,
 			   const struct snd_pci_quirk *quirk,
-			   const struct alc_pincfg **pinfix)
+			   const struct alc_fixup *fix)
 {
 	const struct alc_pincfg *cfg;
 
@@ -1380,9 +1390,14 @@ static void alc_fix_pincfg(struct hda_codec *codec,
 	if (!quirk)
 		return;
 
-	cfg = pinfix[quirk->value];
-	for (; cfg->nid; cfg++)
-		snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val);
+	fix += quirk->value;
+	cfg = fix->pins;
+	if (cfg) {
+		for (; cfg->nid; cfg++)
+			snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val);
+	}
+	if (fix->verbs)
+		add_verb(codec->spec, fix->verbs);
 }
 
 /*
@@ -9593,11 +9608,13 @@ static struct alc_pincfg alc882_abit_aw9d_pinfix[] = {
 	{ }
 };
 
-static const struct alc_pincfg *alc882_pin_fixes[] = {
-	[PINFIX_ABIT_AW9D_MAX] = alc882_abit_aw9d_pinfix,
+static const struct alc_fixup alc882_fixups[] = {
+	[PINFIX_ABIT_AW9D_MAX] = {
+		.pins = alc882_abit_aw9d_pinfix
+	},
 };
 
-static struct snd_pci_quirk alc882_pinfix_tbl[] = {
+static struct snd_pci_quirk alc882_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
 	{}
 };
@@ -9869,7 +9886,7 @@ static int patch_alc882(struct hda_codec *codec)
 		board_config = ALC882_AUTO;
 	}
 
-	alc_fix_pincfg(codec, alc882_pinfix_tbl, alc882_pin_fixes);
+	alc_pick_fixup(codec, alc882_fixup_tbl, alc882_fixups);
 
 	if (board_config == ALC882_AUTO) {
 		/* automatic parse from the BIOS config */
@@ -12660,7 +12677,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.init_hook = alc268_toshiba_automute,
 	},
 	[ALC268_ACER] = {
-		.mixers = { alc268_acer_mixer, alc268_capture_nosrc_mixer,
+		.mixers = { alc268_acer_mixer, alc268_capture_alt_mixer,
 			    alc268_beep_mixer },
 		.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
 				alc268_acer_verbs },
@@ -12842,12 +12859,15 @@ static int patch_alc268(struct hda_codec *codec)
 		unsigned int wcap = get_wcaps(codec, 0x07);
 		int i;
 
+		spec->capsrc_nids = alc268_capsrc_nids;
 		/* get type */
 		wcap = get_wcaps_type(wcap);
 		if (spec->auto_mic ||
 		    wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
 			spec->adc_nids = alc268_adc_nids_alt;
 			spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt);
+			if (spec->auto_mic)
+				fixup_automic_adc(codec);
 			if (spec->auto_mic || spec->input_mux->num_items == 1)
 				add_mixer(spec, alc268_capture_nosrc_mixer);
 			else
@@ -12857,7 +12877,6 @@ static int patch_alc268(struct hda_codec *codec)
 			spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids);
 			add_mixer(spec, alc268_capture_mixer);
 		}
-		spec->capsrc_nids = alc268_capsrc_nids;
 		/* set default input source */
 		for (i = 0; i < spec->num_adc_nids; i++)
 			snd_hda_codec_write_cache(codec, alc268_capsrc_nids[i],
@@ -14357,15 +14376,16 @@ static void alc861_auto_init_multi_out(struct hda_codec *codec)
 static void alc861_auto_init_hp_out(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	hda_nid_t pin;
 
-	pin = spec->autocfg.hp_pins[0];
-	if (pin)
-		alc861_auto_set_output_and_unmute(codec, pin, PIN_HP,
+	if (spec->autocfg.hp_outs)
+		alc861_auto_set_output_and_unmute(codec,
+						  spec->autocfg.hp_pins[0],
+						  PIN_HP,
 						  spec->multiout.hp_nid);
-	pin = spec->autocfg.speaker_pins[0];
-	if (pin)
-		alc861_auto_set_output_and_unmute(codec, pin, PIN_OUT,
+	if (spec->autocfg.speaker_outs)
+		alc861_auto_set_output_and_unmute(codec,
+						  spec->autocfg.speaker_pins[0],
+						  PIN_OUT,
 						  spec->multiout.dac_nids[0]);
 }
 
@@ -15158,7 +15178,7 @@ static struct snd_pci_quirk alc861vd_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1019, 0xa88d, "Realtek ALC660 demo", ALC660VD_3ST),
 	SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_HP),
 	SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST),
-	SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),
+	/*SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),*/ /* auto */
 	SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC660VD_ASUS_V1S),
 	SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660VD_3ST_DIG),
 	SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
@@ -15551,6 +15571,29 @@ static void alc861vd_auto_init(struct hda_codec *codec)
 		alc_inithook(codec);
 }
 
+enum {
+	ALC660VD_FIX_ASUS_GPIO1
+};
+
+/* reset GPIO1 */
+static const struct hda_verb alc660vd_fix_asus_gpio1_verbs[] = {
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x03},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+	{ }
+};
+
+static const struct alc_fixup alc861vd_fixups[] = {
+	[ALC660VD_FIX_ASUS_GPIO1] = {
+		.verbs = alc660vd_fix_asus_gpio1_verbs,
+	},
+};
+
+static struct snd_pci_quirk alc861vd_fixup_tbl[] = {
+	SND_PCI_QUIRK(0x1043, 0x1339, "ASUS A7-K", ALC660VD_FIX_ASUS_GPIO1),
+	{}
+};
+
 static int patch_alc861vd(struct hda_codec *codec)
 {
 	struct alc_spec *spec;
@@ -15572,6 +15615,8 @@ static int patch_alc861vd(struct hda_codec *codec)
 		board_config = ALC861VD_AUTO;
 	}
 
+	alc_pick_fixup(codec, alc861vd_fixup_tbl, alc861vd_fixups);
+
 	if (board_config == ALC861VD_AUTO) {
 		/* automatic parse from the BIOS config */
 		err = alc861vd_parse_auto_config(codec);
@@ -16852,6 +16897,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
 	SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
 		      ALC662_3ST_6ch_DIG),
+	SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
 	SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
 		      ALC662_3ST_6ch_DIG),
@@ -17145,70 +17191,145 @@ static struct alc_config_preset alc662_presets[] = {
  * BIOS auto configuration
  */
 
+/* convert from MIX nid to DAC */
+static inline hda_nid_t alc662_mix_to_dac(hda_nid_t nid)
+{
+	if (nid == 0x0f)
+		return 0x02;
+	else if (nid >= 0x0c && nid <= 0x0e)
+		return nid - 0x0c + 0x02;
+	else
+		return 0;
+}
+
+/* get MIX nid connected to the given pin targeted to DAC */
+static hda_nid_t alc662_dac_to_mix(struct hda_codec *codec, hda_nid_t pin,
+				   hda_nid_t dac)
+{
+	hda_nid_t mix[4];
+	int i, num;
+
+	num = snd_hda_get_connections(codec, pin, mix, ARRAY_SIZE(mix));
+	for (i = 0; i < num; i++) {
+		if (alc662_mix_to_dac(mix[i]) == dac)
+			return mix[i];
+	}
+	return 0;
+}
+
+/* look for an empty DAC slot */
+static hda_nid_t alc662_look_for_dac(struct hda_codec *codec, hda_nid_t pin)
+{
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t srcs[5];
+	int i, j, num;
+
+	num = snd_hda_get_connections(codec, pin, srcs, ARRAY_SIZE(srcs));
+	if (num < 0)
+		return 0;
+	for (i = 0; i < num; i++) {
+		hda_nid_t nid = alc662_mix_to_dac(srcs[i]);
+		if (!nid)
+			continue;
+		for (j = 0; j < spec->multiout.num_dacs; j++)
+			if (spec->multiout.dac_nids[j] == nid)
+				break;
+		if (j >= spec->multiout.num_dacs)
+			return nid;
+	}
+	return 0;
+}
+
+/* fill in the dac_nids table from the parsed pin configuration */
+static int alc662_auto_fill_dac_nids(struct hda_codec *codec,
+				     const struct auto_pin_cfg *cfg)
+{
+	struct alc_spec *spec = codec->spec;
+	int i;
+	hda_nid_t dac;
+
+	spec->multiout.dac_nids = spec->private_dac_nids;
+	for (i = 0; i < cfg->line_outs; i++) {
+		dac = alc662_look_for_dac(codec, cfg->line_out_pins[i]);
+		if (!dac)
+			continue;
+		spec->multiout.dac_nids[spec->multiout.num_dacs++] = dac;
+	}
+	return 0;
+}
+
+static int alc662_add_vol_ctl(struct alc_spec *spec, const char *pfx,
+			      hda_nid_t nid, unsigned int chs)
+{
+	char name[32];
+	sprintf(name, "%s Playback Volume", pfx);
+	return add_control(spec, ALC_CTL_WIDGET_VOL, name,
+			   HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT));
+}
+
+static int alc662_add_sw_ctl(struct alc_spec *spec, const char *pfx,
+			     hda_nid_t nid, unsigned int chs)
+{
+	char name[32];
+	sprintf(name, "%s Playback Switch", pfx);
+	return add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+			   HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_INPUT));
+}
+
+#define alc662_add_stereo_vol(spec, pfx, nid) \
+	alc662_add_vol_ctl(spec, pfx, nid, 3)
+#define alc662_add_stereo_sw(spec, pfx, nid) \
+	alc662_add_sw_ctl(spec, pfx, nid, 3)
+
 /* add playback controls from the parsed DAC table */
-static int alc662_auto_create_multi_out_ctls(struct alc_spec *spec,
+static int alc662_auto_create_multi_out_ctls(struct hda_codec *codec,
 					     const struct auto_pin_cfg *cfg)
 {
-	char name[32];
+	struct alc_spec *spec = codec->spec;
 	static const char *chname[4] = {
 		"Front", "Surround", NULL /*CLFE*/, "Side"
 	};
-	hda_nid_t nid;
+	hda_nid_t nid, mix;
 	int i, err;
 
 	for (i = 0; i < cfg->line_outs; i++) {
-		if (!spec->multiout.dac_nids[i])
+		nid = spec->multiout.dac_nids[i];
+		if (!nid)
+			continue;
+		mix = alc662_dac_to_mix(codec, cfg->line_out_pins[i], nid);
+		if (!mix)
 			continue;
-		nid = alc880_idx_to_dac(i);
 		if (i == 2) {
 			/* Center/LFE */
-			err = add_control(spec, ALC_CTL_WIDGET_VOL,
-					  "Center Playback Volume",
-					  HDA_COMPOSE_AMP_VAL(nid, 1, 0,
-							      HDA_OUTPUT));
+			err = alc662_add_vol_ctl(spec, "Center", nid, 1);
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_WIDGET_VOL,
-					  "LFE Playback Volume",
-					  HDA_COMPOSE_AMP_VAL(nid, 2, 0,
-							      HDA_OUTPUT));
+			err = alc662_add_vol_ctl(spec, "LFE", nid, 2);
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_WIDGET_MUTE,
-					  "Center Playback Switch",
-					  HDA_COMPOSE_AMP_VAL(0x0e, 1, 0,
-							      HDA_INPUT));
+			err = alc662_add_sw_ctl(spec, "Center", mix, 1);
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_WIDGET_MUTE,
-					  "LFE Playback Switch",
-					  HDA_COMPOSE_AMP_VAL(0x0e, 2, 0,
-							      HDA_INPUT));
+			err = alc662_add_sw_ctl(spec, "LFE", mix, 2);
 			if (err < 0)
 				return err;
 		} else {
 			const char *pfx;
 			if (cfg->line_outs == 1 &&
 			    cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
-				if (!cfg->hp_pins)
+				if (cfg->hp_outs)
 					pfx = "Speaker";
 				else
 					pfx = "PCM";
 			} else
 				pfx = chname[i];
-			sprintf(name, "%s Playback Volume", pfx);
-			err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
-					  HDA_COMPOSE_AMP_VAL(nid, 3, 0,
-							      HDA_OUTPUT));
+			err = alc662_add_vol_ctl(spec, pfx, nid, 3);
 			if (err < 0)
 				return err;
 			if (cfg->line_outs == 1 &&
 			    cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
 				pfx = "Speaker";
-			sprintf(name, "%s Playback Switch", pfx);
-			err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
-				HDA_COMPOSE_AMP_VAL(alc880_idx_to_mixer(i),
-						    3, 0, HDA_INPUT));
+			err = alc662_add_sw_ctl(spec, pfx, mix, 3);
 			if (err < 0)
 				return err;
 		}
@@ -17217,54 +17338,38 @@ static int alc662_auto_create_multi_out_ctls(struct alc_spec *spec,
 }
 
 /* add playback controls for speaker and HP outputs */
-static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
+/* return DAC nid if any new DAC is assigned */
+static int alc662_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin,
 					const char *pfx)
 {
-	hda_nid_t nid;
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t nid, mix;
 	int err;
-	char name[32];
 
 	if (!pin)
 		return 0;
-
-	if (pin == 0x17) {
-		/* ALC663 has a mono output pin on 0x17 */
+	nid = alc662_look_for_dac(codec, pin);
+	if (!nid) {
+		char name[32];
+		/* the corresponding DAC is already occupied */
+		if (!(get_wcaps(codec, pin) & AC_WCAP_OUT_AMP))
+			return 0; /* no way */
+		/* create a switch only */
 		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
-				  HDA_COMPOSE_AMP_VAL(pin, 2, 0, HDA_OUTPUT));
-		return err;
+		return add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+				   HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
 	}
 
-	if (alc880_is_fixed_pin(pin)) {
-		nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
-		/* printk(KERN_DEBUG "DAC nid=%x\n",nid); */
-		/* specify the DAC as the extra output */
-		if (!spec->multiout.hp_nid)
-			spec->multiout.hp_nid = nid;
-		else
-			spec->multiout.extra_out_nid[0] = nid;
-		/* control HP volume/switch on the output mixer amp */
-		nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
-		sprintf(name, "%s Playback Volume", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
-				  HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
-		if (err < 0)
-			return err;
-		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_BIND_MUTE, name,
-				  HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT));
-		if (err < 0)
-			return err;
-	} else if (alc880_is_multi_pin(pin)) {
-		/* set manual connection */
-		/* we have only a switch on HP-out PIN */
-		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
-				  HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
-		if (err < 0)
-			return err;
-	}
-	return 0;
+	mix = alc662_dac_to_mix(codec, pin, nid);
+	if (!mix)
+		return 0;
+	err = alc662_add_vol_ctl(spec, pfx, nid, 3);
+	if (err < 0)
+		return err;
+	err = alc662_add_sw_ctl(spec, pfx, mix, 3);
+	if (err < 0)
+		return err;
+	return nid;
 }
 
 /* create playback/capture controls for input pins */
@@ -17273,30 +17378,35 @@ static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
 
 static void alc662_auto_set_output_and_unmute(struct hda_codec *codec,
 					      hda_nid_t nid, int pin_type,
-					      int dac_idx)
+					      hda_nid_t dac)
 {
+	int i, num;
+	hda_nid_t srcs[4];
+
 	alc_set_pin_output(codec, nid, pin_type);
 	/* need the manual connection? */
-	if (alc880_is_multi_pin(nid)) {
-		struct alc_spec *spec = codec->spec;
-		int idx = alc880_multi_pin_idx(nid);
-		snd_hda_codec_write(codec, alc880_idx_to_selector(idx), 0,
-				    AC_VERB_SET_CONNECT_SEL,
-				    alc880_dac_to_idx(spec->multiout.dac_nids[dac_idx]));
+	num = snd_hda_get_connections(codec, nid, srcs, ARRAY_SIZE(srcs));
+	if (num <= 1)
+		return;
+	for (i = 0; i < num; i++) {
+		if (alc662_mix_to_dac(srcs[i]) != dac)
+			continue;
+		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, i);
+		return;
 	}
 }
 
 static void alc662_auto_init_multi_out(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	int pin_type = get_pin_type(spec->autocfg.line_out_type);
 	int i;
 
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
-		int pin_type = get_pin_type(spec->autocfg.line_out_type);
 		if (nid)
 			alc662_auto_set_output_and_unmute(codec, nid, pin_type,
-							  i);
+					spec->multiout.dac_nids[i]);
 	}
 }
 
@@ -17306,12 +17416,13 @@ static void alc662_auto_init_hp_out(struct hda_codec *codec)
 	hda_nid_t pin;
 
 	pin = spec->autocfg.hp_pins[0];
-	if (pin) /* connect to front */
-		/* use dac 0 */
-		alc662_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+	if (pin)
+		alc662_auto_set_output_and_unmute(codec, pin, PIN_HP,
+						  spec->multiout.hp_nid);
 	pin = spec->autocfg.speaker_pins[0];
 	if (pin)
-		alc662_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
+		alc662_auto_set_output_and_unmute(codec, pin, PIN_OUT,
+					spec->multiout.extra_out_nid[0]);
 }
 
 #define ALC662_PIN_CD_NID		ALC880_PIN_CD_NID
@@ -17349,21 +17460,25 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
 	if (!spec->autocfg.line_outs)
 		return 0; /* can't find valid BIOS pin config */
 
-	err = alc880_auto_fill_dac_nids(spec, &spec->autocfg);
+	err = alc662_auto_fill_dac_nids(codec, &spec->autocfg);
 	if (err < 0)
 		return err;
-	err = alc662_auto_create_multi_out_ctls(spec, &spec->autocfg);
+	err = alc662_auto_create_multi_out_ctls(codec, &spec->autocfg);
 	if (err < 0)
 		return err;
-	err = alc662_auto_create_extra_out(spec,
+	err = alc662_auto_create_extra_out(codec,
 					   spec->autocfg.speaker_pins[0],
 					   "Speaker");
 	if (err < 0)
 		return err;
-	err = alc662_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
+	if (err)
+		spec->multiout.extra_out_nid[0] = err;
+	err = alc662_auto_create_extra_out(codec, spec->autocfg.hp_pins[0],
 					   "Headphone");
 	if (err < 0)
 		return err;
+	if (err)
+		spec->multiout.hp_nid = err;
 	err = alc662_auto_create_input_ctls(codec, &spec->autocfg);
 	if (err < 0)
 		return err;
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 826137ec3002..66c0876bf734 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -158,6 +158,7 @@ enum {
 	STAC_D965_5ST_NO_FP,
 	STAC_DELL_3ST,
 	STAC_DELL_BIOS,
+	STAC_927X_VOLKNOB,
 	STAC_927X_MODELS
 };
 
@@ -182,8 +183,8 @@ struct sigmatel_jack {
 
 struct sigmatel_mic_route {
 	hda_nid_t pin;
-	unsigned char mux_idx;
-	unsigned char dmux_idx;
+	signed char mux_idx;
+	signed char dmux_idx;
 };
 
 struct sigmatel_spec {
@@ -907,6 +908,16 @@ static struct hda_verb d965_core_init[] = {
 	{}
 };
 
+static struct hda_verb dell_3st_core_init[] = {
+	/* don't set delta bit */
+	{0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f},
+	/* unmute node 0x1b */
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	/* select node 0x03 as DAC */
+	{0x0b, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{}
+};
+
 static struct hda_verb stac927x_core_init[] = {
 	/* set master volume and direct control */	
 	{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
@@ -915,6 +926,14 @@ static struct hda_verb stac927x_core_init[] = {
 	{}
 };
 
+static struct hda_verb stac927x_volknob_core_init[] = {
+	/* don't set delta bit */
+	{0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f},
+	/* enable analog pc beep path */
+	{0x01, AC_VERB_SET_DIGI_CONVERT_2, 1 << 5},
+	{}
+};
+
 static struct hda_verb stac9205_core_init[] = {
 	/* set master volume and direct control */	
 	{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
@@ -1999,6 +2018,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
 	[STAC_D965_5ST_NO_FP]  = d965_5st_no_fp_pin_configs,
 	[STAC_DELL_3ST]  = dell_3st_pin_configs,
 	[STAC_DELL_BIOS] = NULL,
+	[STAC_927X_VOLKNOB] = NULL,
 };
 
 static const char *stac927x_models[STAC_927X_MODELS] = {
@@ -2010,6 +2030,7 @@ static const char *stac927x_models[STAC_927X_MODELS] = {
 	[STAC_D965_5ST_NO_FP]	= "5stack-no-fp",
 	[STAC_DELL_3ST]		= "dell-3stack",
 	[STAC_DELL_BIOS]	= "dell-bios",
+	[STAC_927X_VOLKNOB]	= "volknob",
 };
 
 static struct snd_pci_quirk stac927x_cfg_tbl[] = {
@@ -2045,6 +2066,8 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = {
 			   "Intel D965", STAC_D965_5ST),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500,
 			   "Intel D965", STAC_D965_5ST),
+	/* volume-knob fixes */
+	SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB),
 	{} /* terminator */
 };
 
@@ -3469,18 +3492,26 @@ static int set_mic_route(struct hda_codec *codec,
 			break;
 	if (i <= AUTO_PIN_FRONT_MIC) {
 		/* analog pin */
-		mic->dmux_idx = 0;
 		i = get_connection_index(codec, spec->mux_nids[0], pin);
 		if (i < 0)
 			return -1;
 		mic->mux_idx = i;
+		mic->dmux_idx = -1;
+		if (spec->dmux_nids)
+			mic->dmux_idx = get_connection_index(codec,
+							     spec->dmux_nids[0],
+							     spec->mux_nids[0]);
 	}  else if (spec->dmux_nids) {
 		/* digital pin */
-		mic->mux_idx = 0;
 		i = get_connection_index(codec, spec->dmux_nids[0], pin);
 		if (i < 0)
 			return -1;
 		mic->dmux_idx = i;
+		mic->mux_idx = -1;
+		if (spec->mux_nids)
+			mic->mux_idx = get_connection_index(codec,
+							    spec->mux_nids[0],
+							    spec->dmux_nids[0]);
 	}
 	return 0;
 }
@@ -4557,11 +4588,11 @@ static void stac92xx_mic_detect(struct hda_codec *codec)
 		mic = &spec->ext_mic;
 	else
 		mic = &spec->int_mic;
-	if (mic->dmux_idx)
+	if (mic->dmux_idx >= 0)
 		snd_hda_codec_write_cache(codec, spec->dmux_nids[0], 0,
 					  AC_VERB_SET_CONNECT_SEL,
 					  mic->dmux_idx);
-	else
+	if (mic->mux_idx >= 0)
 		snd_hda_codec_write_cache(codec, spec->mux_nids[0], 0,
 					  AC_VERB_SET_CONNECT_SEL,
 					  mic->mux_idx);
@@ -5604,10 +5635,14 @@ static int patch_stac927x(struct hda_codec *codec)
 		spec->dmic_nids = stac927x_dmic_nids;
 		spec->num_dmics = STAC927X_NUM_DMICS;
 
-		spec->init = d965_core_init;
+		spec->init = dell_3st_core_init;
 		spec->dmux_nids = stac927x_dmux_nids;
 		spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids);
 		break;
+	case STAC_927X_VOLKNOB:
+		spec->num_dmics = 0;
+		spec->init = stac927x_volknob_core_init;
+		break;
 	default:
 		spec->num_dmics = 0;
 		spec->init = stac927x_core_init;
diff --git a/sound/pci/ice1712/amp.c b/sound/pci/ice1712/amp.c
index 37564300b50d..6da21a2bcade 100644
--- a/sound/pci/ice1712/amp.c
+++ b/sound/pci/ice1712/amp.c
@@ -52,11 +52,13 @@ static int __devinit snd_vt1724_amp_init(struct snd_ice1712 *ice)
 
 	/* only use basic functionality for now */
 
-	ice->num_total_dacs = 2;	/* only PSDOUT0 is connected */
+	/* VT1616 6ch codec connected to PSDOUT0 using packed mode */
+	ice->num_total_dacs = 6;
 	ice->num_total_adcs = 2;
 
-	/* Chaintech AV-710 has another codecs, which need initialization */
-	/* initialize WM8728 codec */
+	/* Chaintech AV-710 has another WM8728 codec connected to PSDOUT4
+	   (shared with the SPDIF output). Mixer control for this codec
+	   is not yet supported. */
 	if (ice->eeprom.subvendor == VT1724_SUBDEVICE_AV710) {
 		for (i = 0; i < ARRAY_SIZE(wm_inits); i += 2)
 			wm_put(ice, wm_inits[i], wm_inits[i+1]);
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index cecf1ffeeaaa..d74033a2cfbe 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2259,7 +2259,7 @@ static int snd_ice1712_pro_peak_get(struct snd_kcontrol *kcontrol,
 }
 
 static struct snd_kcontrol_new snd_ice1712_mixer_pro_peak __devinitdata = {
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.iface = SNDRV_CTL_ELEM_IFACE_PCM,
 	.name = "Multi Track Peak",
 	.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
 	.info = snd_ice1712_pro_peak_info,
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index af6e00148621..10fc92c05574 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -648,7 +648,7 @@ static int snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 	    (inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) {
 		/* running? we cannot change the rate now... */
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return -EBUSY;
+		return ((rate == ice->cur_rate) && !force) ? 0 : -EBUSY;
 	}
 	if (!force && is_pro_rate_locked(ice)) {
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
@@ -1294,7 +1294,7 @@ static int __devinit snd_vt1724_pcm_spdif(struct snd_ice1712 *ice, int device)
 
 	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
 					      snd_dma_pci_data(ice->pci),
-					      64*1024, 64*1024);
+					      256*1024, 256*1024);
 
 	ice->pcm = pcm;
 
@@ -1408,7 +1408,7 @@ static int __devinit snd_vt1724_pcm_indep(struct snd_ice1712 *ice, int device)
 
 	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
 					      snd_dma_pci_data(ice->pci),
-					      64*1024, 64*1024);
+					      256*1024, 256*1024);
 
 	ice->pcm_ds = pcm;
 
@@ -2110,7 +2110,7 @@ static int snd_vt1724_pro_peak_get(struct snd_kcontrol *kcontrol,
 }
 
 static struct snd_kcontrol_new snd_vt1724_mixer_pro_peak __devinitdata = {
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.iface = SNDRV_CTL_ELEM_IFACE_PCM,
 	.name = "Multi Track Peak",
 	.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
 	.info = snd_vt1724_pro_peak_info,
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 171ada535209..754867ed4785 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1954,6 +1954,18 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
 		.name = "Sony S1XP",
 		.type = AC97_TUNE_INV_EAPD
 	},
+	{
+		.subvendor = 0x104d,
+		.subdevice = 0x81c0,
+		.name = "Sony VAIO VGN-T350P", /*AD1981B*/
+		.type = AC97_TUNE_INV_EAPD
+	},
+	{
+		.subvendor = 0x104d,
+		.subdevice = 0x81c5,
+		.name = "Sony VAIO VGN-B1VP", /*AD1981B*/
+		.type = AC97_TUNE_INV_EAPD
+	},
  	{
 		.subvendor = 0x1043,
 		.subdevice = 0x80f3,
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index acfa4760da49..91683a349035 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -1626,7 +1626,7 @@ static int snd_via8233_dxs_volume_get(struct snd_kcontrol *kcontrol,
 				      struct snd_ctl_elem_value *ucontrol)
 {
 	struct via82xx *chip = snd_kcontrol_chip(kcontrol);
-	unsigned int idx = snd_ctl_get_ioff(kcontrol, &ucontrol->id);
+	unsigned int idx = kcontrol->id.subdevice;
 
 	ucontrol->value.integer.value[0] = VIA_DXS_MAX_VOLUME - chip->playback_volume[idx][0];
 	ucontrol->value.integer.value[1] = VIA_DXS_MAX_VOLUME - chip->playback_volume[idx][1];
@@ -1646,7 +1646,7 @@ static int snd_via8233_dxs_volume_put(struct snd_kcontrol *kcontrol,
 				      struct snd_ctl_elem_value *ucontrol)
 {
 	struct via82xx *chip = snd_kcontrol_chip(kcontrol);
-	unsigned int idx = snd_ctl_get_ioff(kcontrol, &ucontrol->id);
+	unsigned int idx = kcontrol->id.subdevice;
 	unsigned long port = chip->port + 0x10 * idx;
 	unsigned char val;
 	int i, change = 0;
@@ -1705,11 +1705,12 @@ static struct snd_kcontrol_new snd_via8233_pcmdxs_volume_control __devinitdata =
 };
 
 static struct snd_kcontrol_new snd_via8233_dxs_volume_control __devinitdata = {
-	.name = "VIA DXS Playback Volume",
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+	.device = 0,
+	/* .subdevice set later */
+	.name = "PCM Playback Volume",
 	.access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
 		   SNDRV_CTL_ELEM_ACCESS_TLV_READ),
-	.count = 4,
 	.info = snd_via8233_dxs_volume_info,
 	.get = snd_via8233_dxs_volume_get,
 	.put = snd_via8233_dxs_volume_put,
@@ -1936,10 +1937,18 @@ static int __devinit snd_via8233_init_misc(struct via82xx *chip)
 		}
 		else /* Using DXS when PCM emulation is enabled is really weird */
 		{
-			/* Standalone DXS controls */
-			err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_via8233_dxs_volume_control, chip));
-			if (err < 0)
-				return err;
+			for (i = 0; i < 4; ++i) {
+				struct snd_kcontrol *kctl;
+
+				kctl = snd_ctl_new1(
+					&snd_via8233_dxs_volume_control, chip);
+				if (!kctl)
+					return -ENOMEM;
+				kctl->id.subdevice = i;
+				err = snd_ctl_add(chip->card, kctl);
+				if (err < 0)
+					return err;
+			}
 		}
 	}
 	/* select spdif data slot 10/11 */
diff --git a/sound/ppc/Kconfig b/sound/ppc/Kconfig
index bd2338ab2ced..0519c60f5be1 100644
--- a/sound/ppc/Kconfig
+++ b/sound/ppc/Kconfig
@@ -2,7 +2,7 @@
 
 menuconfig SND_PPC
 	bool "PowerPC sound devices"
-	depends on PPC64 || PPC32
+	depends on PPC
 	default y
 	help
 	  Support for sound devices specific to PowerPC architectures.
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index 835fa19ed461..d06f780bd7e8 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -59,6 +59,18 @@ static int keywest_attach_adapter(struct i2c_adapter *adapter)
 	strlcpy(info.type, "keywest", I2C_NAME_SIZE);
 	info.addr = keywest_ctx->addr;
 	keywest_ctx->client = i2c_new_device(adapter, &info);
+	if (!keywest_ctx->client)
+		return -ENODEV;
+	/*
+	 * We know the driver is already loaded, so the device should be
+	 * already bound. If not it means binding failed, and then there
+	 * is no point in keeping the device instantiated.
+	 */
+	if (!keywest_ctx->client->driver) {
+		i2c_unregister_device(keywest_ctx->client);
+		keywest_ctx->client = NULL;
+		return -ENODEV;
+	}
 	
 	/*
 	 * Let i2c-core delete that device on driver removal.
@@ -86,7 +98,7 @@ static const struct i2c_device_id keywest_i2c_id[] = {
 	{ }
 };
 
-struct i2c_driver keywest_driver = {
+static struct i2c_driver keywest_driver = {
 	.driver = {
 		.name = "PMac Keywest Audio",
 	},
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
index ac927ffdc961..97f1a251e446 100644
--- a/sound/soc/blackfin/Kconfig
+++ b/sound/soc/blackfin/Kconfig
@@ -7,15 +7,6 @@ config SND_BF5XX_I2S
 	  mode (supports single stereo In/Out).
 	  You will also need to select the audio interfaces to support below.
 
-config SND_BF5XX_TDM
-	tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
-	depends on (BLACKFIN && SND_SOC)
-	help
-	  Say Y or M if you want to add support for codecs attached to
-	  the Blackfin SPORT (synchronous serial ports) interface in TDM
-	  mode.
-	  You will also need to select the audio interfaces to support below.
-
 config SND_BF5XX_SOC_SSM2602
 	tristate "SoC SSM2602 Audio support for BF52x ezkit"
 	depends on SND_BF5XX_I2S
@@ -41,6 +32,31 @@ config SND_BFIN_AD73311_SE
 	  Enter the GPIO used to control AD73311's SE pin. Acceptable
 	  values are 0 to 7
 
+config SND_BF5XX_TDM
+	tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
+	depends on (BLACKFIN && SND_SOC)
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the Blackfin SPORT (synchronous serial ports) interface in TDM
+	  mode.
+	  You will also need to select the audio interfaces to support below.
+
+config SND_BF5XX_SOC_AD1836
+	tristate "SoC AD1836 Audio support for BF5xx"
+	depends on SND_BF5XX_TDM
+	select SND_BF5XX_SOC_TDM
+	select SND_SOC_AD1836
+	help
+	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
+config SND_BF5XX_SOC_AD1938
+	tristate "SoC AD1938 Audio support for Blackfin"
+	depends on SND_BF5XX_TDM
+	select SND_BF5XX_SOC_TDM
+	select SND_SOC_AD1938
+	help
+	  Say Y if you want to add support for AD1938 codec on Blackfin.
+
 config SND_BF5XX_AC97
 	tristate "SoC AC97 Audio for the ADI BF5xx chip"
 	depends on BLACKFIN
@@ -71,6 +87,30 @@ config SND_BF5XX_MULTICHAN_SUPPORT
 	  Say y if you want AC97 driver to support up to 5.1 channel audio.
 	  this mode will consume much more memory for DMA.
 
+config SND_BF5XX_HAVE_COLD_RESET
+	bool "BOARD has COLD Reset GPIO"
+	depends on SND_BF5XX_AC97
+	default y if BFIN548_EZKIT
+	default n if !BFIN548_EZKIT
+
+config SND_BF5XX_RESET_GPIO_NUM
+	int "Set a GPIO for cold reset"
+	depends on SND_BF5XX_HAVE_COLD_RESET
+	range 0 159
+	default 19 if BFIN548_EZKIT
+	default 5 if BFIN537_STAMP
+	default 0
+	help
+	  Set the correct GPIO for RESET the sound chip.
+
+config SND_BF5XX_SOC_AD1980
+	tristate "SoC AD1980/1 Audio support for BF5xx"
+	depends on SND_BF5XX_AC97
+	select SND_BF5XX_SOC_AC97
+	select SND_SOC_AD1980
+	help
+	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
 config SND_BF5XX_SOC_SPORT
 	tristate
 
@@ -88,30 +128,6 @@ config SND_BF5XX_SOC_AC97
 	select SND_SOC_AC97_BUS
 	select SND_BF5XX_SOC_SPORT
 
-config SND_BF5XX_SOC_AD1836
-	tristate "SoC AD1836 Audio support for BF5xx"
-	depends on SND_BF5XX_TDM
-	select SND_BF5XX_SOC_TDM
-	select SND_SOC_AD1836
-	help
-	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1980
-	tristate "SoC AD1980/1 Audio support for BF5xx"
-	depends on SND_BF5XX_AC97
-	select SND_BF5XX_SOC_AC97
-	select SND_SOC_AD1980
-	help
-	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1938
-        tristate "SoC AD1938 Audio support for Blackfin"
-        depends on SND_BF5XX_TDM
-        select SND_BF5XX_SOC_TDM
-        select SND_SOC_AD1938
-        help
-          Say Y if you want to add support for AD1938 codec on Blackfin.
-
 config SND_BF5XX_SPORT_NUM
 	int "Set a SPORT for Sound chip"
 	depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
@@ -120,19 +136,3 @@ config SND_BF5XX_SPORT_NUM
 	default 0
 	help
 	  Set the correct SPORT for sound chip.
-
-config SND_BF5XX_HAVE_COLD_RESET
-	bool "BOARD has COLD Reset GPIO"
-	depends on SND_BF5XX_AC97
-	default y if BFIN548_EZKIT
-	default n if !BFIN548_EZKIT
-
-config SND_BF5XX_RESET_GPIO_NUM
-	int "Set a GPIO for cold reset"
-	depends on SND_BF5XX_HAVE_COLD_RESET
-	range 0 159
-	default 19 if BFIN548_EZKIT
-	default 5 if BFIN537_STAMP
-	default 0
-	help
-	  Set the correct GPIO for RESET the sound chip.
diff --git a/sound/soc/blackfin/bf5xx-i2s.c b/sound/soc/blackfin/bf5xx-i2s.c
index 1e9d161c76c4..084b68884ada 100644
--- a/sound/soc/blackfin/bf5xx-i2s.c
+++ b/sound/soc/blackfin/bf5xx-i2s.c
@@ -77,12 +77,12 @@ static struct sport_param sport_params[2] = {
  * TFS. When Port G is selected and EMAC then there is a conflict between
  * the PHY interrupt line and TFS.  Current settings prevent the conflict
  * by ignoring the TFS pin when Port G is selected. This allows both
- * ssm2602 using Port G and EMAC concurrently.
+ * codecs and EMAC using Port G concurrently.
  */
-#ifdef CONFIG_BF527_SPORT0_PORTF
-#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
-#else
+#ifdef CONFIG_BF527_SPORT0_PORTG
 #define LOCAL_SPORT0_TFS (0)
+#else
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
 #endif
 
 static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
diff --git a/sound/soc/blackfin/bf5xx-tdm.c b/sound/soc/blackfin/bf5xx-tdm.c
index 3096badf09a5..ff546e91a22e 100644
--- a/sound/soc/blackfin/bf5xx-tdm.c
+++ b/sound/soc/blackfin/bf5xx-tdm.c
@@ -78,12 +78,12 @@ static struct sport_param sport_params[2] = {
  * TFS. When Port G is selected and EMAC then there is a conflict between
  * the PHY interrupt line and TFS.  Current settings prevent the conflict
  * by ignoring the TFS pin when Port G is selected. This allows both
- * ssm2602 using Port G and EMAC concurrently.
+ * codecs and EMAC using Port G concurrently.
  */
-#ifdef CONFIG_BF527_SPORT0_PORTF
-#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
-#else
+#ifdef CONFIG_BF527_SPORT0_PORTG
 #define LOCAL_SPORT0_TFS (0)
+#else
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
 #endif
 
 static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 3ff0373dff89..593d5b9c9f03 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -579,7 +579,7 @@ static const struct snd_kcontrol_new wm8350_left_capt_mixer_controls[] = {
 	SOC_DAPM_SINGLE_TLV("L3 Capture Volume",
 			    WM8350_INPUT_MIXER_VOLUME_L, 9, 7, 0, out_mix_tlv),
 	SOC_DAPM_SINGLE("PGA Capture Switch",
-			WM8350_LEFT_INPUT_VOLUME, 14, 1, 0),
+			WM8350_LEFT_INPUT_VOLUME, 14, 1, 1),
 };
 
 /* Right Input Mixer */
@@ -589,7 +589,7 @@ static const struct snd_kcontrol_new wm8350_right_capt_mixer_controls[] = {
 	SOC_DAPM_SINGLE_TLV("L3 Capture Volume",
 			    WM8350_INPUT_MIXER_VOLUME_R, 13, 7, 0, out_mix_tlv),
 	SOC_DAPM_SINGLE("PGA Capture Switch",
-			WM8350_RIGHT_INPUT_VOLUME, 14, 1, 0),
+			WM8350_RIGHT_INPUT_VOLUME, 14, 1, 1),
 };
 
 /* Left Mic Mixer */
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index da97aae475a2..1ef2454c5205 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -790,7 +790,7 @@ static int wm8940_register(struct wm8940_priv *wm8940,
 	codec->reg_cache = &wm8940->reg_cache;
 
 	ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
-	if (ret == 0) {
+	if (ret < 0) {
 		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
 		return ret;
 	}
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index 12a6c549ee6e..4ae707048021 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -97,22 +97,19 @@ enum {
 	DAVINCI_MCBSP_WORD_32,
 };
 
-static struct davinci_pcm_dma_params davinci_i2s_pcm_out = {
-	.name = "I2S PCM Stereo out",
-};
-
-static struct davinci_pcm_dma_params davinci_i2s_pcm_in = {
-	.name = "I2S PCM Stereo in",
-};
-
 struct davinci_mcbsp_dev {
+	/*
+	 * dma_params must be first because rtd->dai->cpu_dai->private_data
+	 * is cast to a pointer of an array of struct davinci_pcm_dma_params in
+	 * davinci_pcm_open.
+	 */
+	struct davinci_pcm_dma_params	dma_params[2];
 	void __iomem			*base;
 #define MOD_DSP_A	0
 #define MOD_DSP_B	1
 	int				mode;
 	u32				pcr;
 	struct clk			*clk;
-	struct davinci_pcm_dma_params	*dma_params[2];
 };
 
 static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev,
@@ -215,14 +212,6 @@ static void davinci_mcbsp_stop(struct davinci_mcbsp_dev *dev, int playback)
 	toggle_clock(dev, playback);
 }
 
-static int davinci_i2s_startup(struct snd_pcm_substream *substream,
-			       struct snd_soc_dai *cpu_dai)
-{
-	struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
-	cpu_dai->dma_data = dev->dma_params[substream->stream];
-	return 0;
-}
-
 #define DEFAULT_BITPERSAMPLE	16
 
 static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
@@ -353,8 +342,9 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *params,
 				 struct snd_soc_dai *dai)
 {
-	struct davinci_pcm_dma_params *dma_params = dai->dma_data;
 	struct davinci_mcbsp_dev *dev = dai->private_data;
+	struct davinci_pcm_dma_params *dma_params =
+					&dev->dma_params[substream->stream];
 	struct snd_interval *i = NULL;
 	int mcbsp_word_length;
 	unsigned int rcr, xcr, srgr;
@@ -472,7 +462,6 @@ static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
 #define DAVINCI_I2S_RATES	SNDRV_PCM_RATE_8000_96000
 
 static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
-	.startup 	= davinci_i2s_startup,
 	.shutdown	= davinci_i2s_shutdown,
 	.prepare	= davinci_i2s_prepare,
 	.trigger	= davinci_i2s_trigger,
@@ -534,12 +523,10 @@ static int davinci_i2s_probe(struct platform_device *pdev)
 
 	dev->base = (void __iomem *)IO_ADDRESS(mem->start);
 
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &davinci_i2s_pcm_out;
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->dma_addr =
+	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].dma_addr =
 	    (dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DXR_REG);
 
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &davinci_i2s_pcm_in;
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->dma_addr =
+	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].dma_addr =
 	    (dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DRR_REG);
 
 	/* first TX, then RX */
@@ -549,7 +536,7 @@ static int davinci_i2s_probe(struct platform_device *pdev)
 		ret = -ENXIO;
 		goto err_free_mem;
 	}
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->channel = res->start;
+	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].channel = res->start;
 
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 	if (!res) {
@@ -557,7 +544,7 @@ static int davinci_i2s_probe(struct platform_device *pdev)
 		ret = -ENXIO;
 		goto err_free_mem;
 	}
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->channel = res->start;
+	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].channel = res->start;
 
 	davinci_i2s_dai.private_data = dev;
 	ret = snd_soc_register_dai(&davinci_i2s_dai);
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 7a06c0a86665..5d1f98a4c978 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -332,14 +332,6 @@ static inline void mcasp_set_ctl_reg(void __iomem *regs, u32 val)
 		printk(KERN_ERR "GBLCTL write error\n");
 }
 
-static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
-						struct snd_soc_dai *cpu_dai)
-{
-	struct davinci_audio_dev *dev = cpu_dai->private_data;
-	cpu_dai->dma_data = dev->dma_params[substream->stream];
-	return 0;
-}
-
 static void mcasp_start_rx(struct davinci_audio_dev *dev)
 {
 	mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXHCLKRST);
@@ -386,17 +378,17 @@ static void mcasp_start_tx(struct davinci_audio_dev *dev)
 
 static void davinci_mcasp_start(struct davinci_audio_dev *dev, int stream)
 {
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (dev->txnumevt)	/* enable FIFO */
+			mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
+								FIFO_ENABLE);
 		mcasp_start_tx(dev);
-	else
+	} else {
+		if (dev->rxnumevt)	/* enable FIFO */
+			mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
+								FIFO_ENABLE);
 		mcasp_start_rx(dev);
-
-	/* enable FIFO */
-	if (dev->txnumevt)
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
-
-	if (dev->rxnumevt)
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+	}
 }
 
 static void mcasp_stop_rx(struct davinci_audio_dev *dev)
@@ -413,17 +405,17 @@ static void mcasp_stop_tx(struct davinci_audio_dev *dev)
 
 static void davinci_mcasp_stop(struct davinci_audio_dev *dev, int stream)
 {
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (dev->txnumevt)	/* disable FIFO */
+			mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
+								FIFO_ENABLE);
 		mcasp_stop_tx(dev);
-	else
+	} else {
+		if (dev->rxnumevt)	/* disable FIFO */
+			mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
+								FIFO_ENABLE);
 		mcasp_stop_rx(dev);
-
-	/* disable FIFO */
-	if (dev->txnumevt)
-		mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
-
-	if (dev->rxnumevt)
-		mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+	}
 }
 
 static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
@@ -720,7 +712,7 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
 {
 	struct davinci_audio_dev *dev = cpu_dai->private_data;
 	struct davinci_pcm_dma_params *dma_params =
-					dev->dma_params[substream->stream];
+					&dev->dma_params[substream->stream];
 	int word_length;
 	u8 numevt;
 
@@ -798,7 +790,6 @@ static int davinci_mcasp_trigger(struct snd_pcm_substream *substream,
 }
 
 static struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
-	.startup 	= davinci_mcasp_startup,
 	.trigger	= davinci_mcasp_trigger,
 	.hw_params	= davinci_mcasp_hw_params,
 	.set_fmt	= davinci_mcasp_set_dai_fmt,
@@ -849,20 +840,12 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 	struct resource *mem, *ioarea, *res;
 	struct snd_platform_data *pdata;
 	struct davinci_audio_dev *dev;
-	int count = 0;
 	int ret = 0;
 
 	dev = kzalloc(sizeof(struct davinci_audio_dev), GFP_KERNEL);
 	if (!dev)
 		return	-ENOMEM;
 
-	dma_data = kzalloc(sizeof(struct davinci_pcm_dma_params) * 2,
-								GFP_KERNEL);
-	if (!dma_data) {
-		ret = -ENOMEM;
-		goto err_release_dev;
-	}
-
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
 		dev_err(&pdev->dev, "no mem resource?\n");
@@ -897,11 +880,10 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 	dev->txnumevt = pdata->txnumevt;
 	dev->rxnumevt = pdata->rxnumevt;
 
-	dma_data[count].name = "I2S PCM Stereo out";
-	dma_data[count].eventq_no = pdata->eventq_no;
-	dma_data[count].dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
+	dma_data = &dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
+	dma_data->eventq_no = pdata->eventq_no;
+	dma_data->dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
 							io_v2p(dev->base));
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &dma_data[count];
 
 	/* first TX, then RX */
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -910,13 +892,12 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 		goto err_release_region;
 	}
 
-	dma_data[count].channel = res->start;
-	count++;
-	dma_data[count].name = "I2S PCM Stereo in";
-	dma_data[count].eventq_no = pdata->eventq_no;
-	dma_data[count].dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
+	dma_data->channel = res->start;
+
+	dma_data = &dev->dma_params[SNDRV_PCM_STREAM_CAPTURE];
+	dma_data->eventq_no = pdata->eventq_no;
+	dma_data->dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
 							io_v2p(dev->base));
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &dma_data[count];
 
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 	if (!res) {
@@ -924,7 +905,7 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 		goto err_release_region;
 	}
 
-	dma_data[count].channel = res->start;
+	dma_data->channel = res->start;
 	davinci_mcasp_dai[pdata->op_mode].private_data = dev;
 	davinci_mcasp_dai[pdata->op_mode].dev = &pdev->dev;
 	ret = snd_soc_register_dai(&davinci_mcasp_dai[pdata->op_mode]);
@@ -936,8 +917,6 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 err_release_region:
 	release_mem_region(mem->start, (mem->end - mem->start) + 1);
 err_release_data:
-	kfree(dma_data);
-err_release_dev:
 	kfree(dev);
 
 	return ret;
@@ -946,7 +925,6 @@ err_release_dev:
 static int davinci_mcasp_remove(struct platform_device *pdev)
 {
 	struct snd_platform_data *pdata = pdev->dev.platform_data;
-	struct davinci_pcm_dma_params *dma_data;
 	struct davinci_audio_dev *dev;
 	struct resource *mem;
 
@@ -959,8 +937,6 @@ static int davinci_mcasp_remove(struct platform_device *pdev)
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(mem->start, (mem->end - mem->start) + 1);
 
-	dma_data = dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
-	kfree(dma_data);
 	kfree(dev);
 
 	return 0;
diff --git a/sound/soc/davinci/davinci-mcasp.h b/sound/soc/davinci/davinci-mcasp.h
index 554354c1cc2f..9d179cc88f7b 100644
--- a/sound/soc/davinci/davinci-mcasp.h
+++ b/sound/soc/davinci/davinci-mcasp.h
@@ -39,10 +39,15 @@ enum {
 };
 
 struct davinci_audio_dev {
+	/*
+	 * dma_params must be first because rtd->dai->cpu_dai->private_data
+	 * is cast to a pointer of an array of struct davinci_pcm_dma_params in
+	 * davinci_pcm_open.
+	 */
+	struct davinci_pcm_dma_params dma_params[2];
 	void __iomem *base;
 	int sample_rate;
 	struct clk *clk;
-	struct davinci_pcm_dma_params *dma_params[2];
 	unsigned int codec_fmt;
 
 	/* McASP specific data */
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index 2f7da49ed34f..c73a915f233f 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -126,16 +126,9 @@ static void davinci_pcm_dma_irq(unsigned lch, u16 ch_status, void *data)
 static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 {
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
 	struct edmacc_param p_ram;
 	int ret;
 
-	if (!dma_data)
-		return -ENODEV;
-
-	prtd->params = dma_data;
-
 	/* Request master DMA channel */
 	ret = edma_alloc_channel(prtd->params->channel,
 				  davinci_pcm_dma_irq, substream,
@@ -244,6 +237,11 @@ static int davinci_pcm_open(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct davinci_runtime_data *prtd;
 	int ret = 0;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct davinci_pcm_dma_params *pa = rtd->dai->cpu_dai->private_data;
+	struct davinci_pcm_dma_params *params = &pa[substream->stream];
+	if (!params)
+		return -ENODEV;
 
 	snd_soc_set_runtime_hwparams(substream, &davinci_pcm_hardware);
 	/* ensure that buffer size is a multiple of period size */
@@ -257,6 +255,7 @@ static int davinci_pcm_open(struct snd_pcm_substream *substream)
 		return -ENOMEM;
 
 	spin_lock_init(&prtd->lock);
+	prtd->params = params;
 
 	runtime->private_data = prtd;
 
diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h
index 63d96253c73a..8746606efc89 100644
--- a/sound/soc/davinci/davinci-pcm.h
+++ b/sound/soc/davinci/davinci-pcm.h
@@ -17,7 +17,6 @@
 
 
 struct davinci_pcm_dma_params {
-	char *name;			/* stream identifier */
 	int channel;			/* sync dma channel ID */
 	unsigned short acnt;
 	dma_addr_t dma_addr;		/* device physical address for DMA */
diff --git a/sound/soc/imx/mxc-ssi.c b/sound/soc/imx/mxc-ssi.c
index 3806ff2c0cd4..ccdefe60e752 100644
--- a/sound/soc/imx/mxc-ssi.c
+++ b/sound/soc/imx/mxc-ssi.c
@@ -397,14 +397,6 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		break;
 	}
 
-	/* sync */
-	if (!(fmt & SND_SOC_DAIFMT_ASYNC))
-		scr |= SSI_SCR_SYN;
-
-	/* tdm - only for stereo atm */
-	if (fmt & SND_SOC_DAIFMT_TDM)
-		scr |= SSI_SCR_NET;
-
 	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
 		SSI1_STCR = stcr;
 		SSI1_SRCR = srcr;
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 6375b4ea525d..dcb3181bb340 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -138,7 +138,7 @@ config SND_PXA2XX_SOC_MIOA701
 
 config SND_PXA2XX_SOC_IMOTE2
        tristate "SoC Audio support for IMote 2"
-       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2
+       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2 && I2C
        select SND_PXA2XX_SOC_I2S
        select SND_SOC_WM8940
        help
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index f79711b9fa5b..8de6f9dec4a2 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -524,7 +524,7 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget)
 
 		/* connected jack or spk ? */
 		if (widget->id == snd_soc_dapm_hp || widget->id == snd_soc_dapm_spk ||
-			widget->id == snd_soc_dapm_line)
+		    (widget->id == snd_soc_dapm_line && !list_empty(&widget->sources)))
 			return 1;
 	}
 
@@ -573,7 +573,8 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget)
 			return 1;
 
 		/* connected jack ? */
-		if (widget->id == snd_soc_dapm_mic || widget->id == snd_soc_dapm_line)
+		if (widget->id == snd_soc_dapm_mic ||
+		    (widget->id == snd_soc_dapm_line && !list_empty(&widget->sinks)))
 			return 1;
 	}
 
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index ab5a3ac2ac47..9efcfd08d747 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -898,6 +898,11 @@ static struct snd_kcontrol_new usb_feature_unit_ctl = {
  * build a feature control
  */
 
+static size_t append_ctl_name(struct snd_kcontrol *kctl, const char *str)
+{
+	return strlcat(kctl->id.name, str, sizeof(kctl->id.name));
+}
+
 static void build_feature_ctl(struct mixer_build *state, unsigned char *desc,
 			      unsigned int ctl_mask, int control,
 			      struct usb_audio_term *iterm, int unitid)
@@ -978,13 +983,13 @@ static void build_feature_ctl(struct mixer_build *state, unsigned char *desc,
 		 */
 		if (! mapped_name && ! (state->oterm.type >> 16)) {
 			if ((state->oterm.type & 0xff00) == 0x0100) {
-				len = strlcat(kctl->id.name, " Capture", sizeof(kctl->id.name));
+				len = append_ctl_name(kctl, " Capture");
 			} else {
-				len = strlcat(kctl->id.name + len, " Playback", sizeof(kctl->id.name));
+				len = append_ctl_name(kctl, " Playback");
 			}
 		}
-		strlcat(kctl->id.name + len, control == USB_FEATURE_MUTE ? " Switch" : " Volume",
-			sizeof(kctl->id.name));
+		append_ctl_name(kctl, control == USB_FEATURE_MUTE ?
+				" Switch" : " Volume");
 		if (control == USB_FEATURE_VOLUME) {
 			kctl->tlv.c = mixer_vol_tlv;
 			kctl->vd[0].access |= 
@@ -1143,7 +1148,7 @@ static void build_mixer_unit_ctl(struct mixer_build *state, unsigned char *desc,
 		len = get_term_name(state, iterm, kctl->id.name, sizeof(kctl->id.name), 0);
 	if (! len)
 		len = sprintf(kctl->id.name, "Mixer Source %d", in_ch + 1);
-	strlcat(kctl->id.name + len, " Volume", sizeof(kctl->id.name));
+	append_ctl_name(kctl, " Volume");
 
 	snd_printdd(KERN_INFO "[%d] MU [%s] ch = %d, val = %d/%d\n",
 		    cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
@@ -1400,8 +1405,8 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, unsigned
 			if (! len)
 				strlcpy(kctl->id.name, name, sizeof(kctl->id.name));
 		}
-		strlcat(kctl->id.name, " ", sizeof(kctl->id.name));
-		strlcat(kctl->id.name, valinfo->suffix, sizeof(kctl->id.name));
+		append_ctl_name(kctl, " ");
+		append_ctl_name(kctl, valinfo->suffix);
 
 		snd_printdd(KERN_INFO "[%d] PU [%s] ch = %d, val = %d/%d\n",
 			    cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
@@ -1610,9 +1615,9 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, unsi
 			strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
 
 		if ((state->oterm.type & 0xff00) == 0x0100)
-			strlcat(kctl->id.name, " Capture Source", sizeof(kctl->id.name));
+			append_ctl_name(kctl, " Capture Source");
 		else
-			strlcat(kctl->id.name, " Playback Source", sizeof(kctl->id.name));
+			append_ctl_name(kctl, " Playback Source");
 	}
 
 	snd_printdd(KERN_INFO "[%d] SU [%s] items = %d\n",
diff --git a/tools/perf/Documentation/perf-timechart.txt b/tools/perf/Documentation/perf-timechart.txt
index 1c2ed3090cce..a7910099d6fd 100644
--- a/tools/perf/Documentation/perf-timechart.txt
+++ b/tools/perf/Documentation/perf-timechart.txt
@@ -31,6 +31,9 @@ OPTIONS
 -w::
 --width=::
         Select the width of the SVG file (default: 1000)
+-p::
+--power-only::
+        Only output the CPU power section of the diagram
 
 
 SEE ALSO
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index b5f1953b6144..742a32eee8fc 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -157,11 +157,18 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
 uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
 uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
 
-# If we're on a 64-bit kernel, use -m64
-ifndef NO_64BIT
-	ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
-	  M64 := -m64
-	endif
+#
+# Add -m32 for cross-builds:
+#
+ifdef NO_64BIT
+  MBITS := -m32
+else
+  #
+  # If we're on a 64-bit kernel, use -m64:
+  #
+  ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
+    MBITS := -m64
+  endif
 endif
 
 # CFLAGS and LDFLAGS are for the users to override from the command line.
@@ -194,7 +201,7 @@ EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wold-style-definition
 EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-prototypes
 EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wdeclaration-after-statement
 
-CFLAGS = $(M64) -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -fstack-protector-all -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS)
+CFLAGS = $(MBITS) -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -fstack-protector-all -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS)
 LDFLAGS = -lpthread -lrt -lelf -lm
 ALL_CFLAGS = $(CFLAGS)
 ALL_LDFLAGS = $(LDFLAGS)
@@ -416,7 +423,7 @@ ifeq ($(uname_S),Darwin)
 endif
 
 ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y)
-	msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
+	msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
 endif
 
 ifdef NO_DEMANGLE
@@ -728,7 +735,7 @@ $(BUILT_INS): perf$X
 common-cmds.h: util/generate-cmdlist.sh command-list.txt
 
 common-cmds.h: $(wildcard Documentation/perf-*.txt)
-	$(QUIET_GEN)util/generate-cmdlist.sh > $@+ && mv $@+ $@
+	$(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@
 
 $(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
 	$(QUIET_GEN)$(RM) $@ $@+ && \
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index a5a050af8e7d..3eeef339c787 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -41,6 +41,7 @@ static int			raw_samples			= 0;
 static int			system_wide			= 0;
 static int			profile_cpu			= -1;
 static pid_t			target_pid			= -1;
+static pid_t			child_pid			= -1;
 static int			inherit				= 1;
 static int			force				= 0;
 static int			append_file			= 0;
@@ -184,6 +185,9 @@ static void sig_handler(int sig)
 
 static void sig_atexit(void)
 {
+	if (child_pid != -1)
+		kill(child_pid, SIGTERM);
+
 	if (signr == -1)
 		return;
 
@@ -610,6 +614,8 @@ static int __cmd_record(int argc, const char **argv)
 				exit(-1);
 			}
 		}
+
+		child_pid = pid;
 	}
 
 	if (realtime_prio) {
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index ea9c15c0cdfe..ce2d5be4f30e 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -1287,7 +1287,7 @@ static struct sort_dimension *available_sorts[] = {
 
 static LIST_HEAD(sort_list);
 
-static int sort_dimension__add(char *tok, struct list_head *list)
+static int sort_dimension__add(const char *tok, struct list_head *list)
 {
 	int i;
 
@@ -1917,7 +1917,7 @@ static void setup_sorting(void)
 
 	free(str);
 
-	sort_dimension__add((char *)"pid", &cmp_pid);
+	sort_dimension__add("pid", &cmp_pid);
 }
 
 static const char *record_args[] = {
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index e5f6ece65a13..3db31e7bf173 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -69,7 +69,8 @@ static int			run_idx				=  0;
 static int			run_count			=  1;
 static int			inherit				=  1;
 static int			scale				=  1;
-static int			target_pid			= -1;
+static pid_t			target_pid			= -1;
+static pid_t			child_pid			= -1;
 static int			null_run			=  0;
 
 static int			fd[MAX_NR_CPUS][MAX_COUNTERS];
@@ -285,6 +286,8 @@ static int run_perf_stat(int argc __used, const char **argv)
 		exit(-1);
 	}
 
+	child_pid = pid;
+
 	/*
 	 * Wait for the child to be ready to exec.
 	 */
@@ -433,6 +436,9 @@ static void skip_signal(int signo)
 
 static void sig_atexit(void)
 {
+	if (child_pid != -1)
+		kill(child_pid, SIGTERM);
+
 	if (signr == -1)
 		return;
 
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index 4405681b3134..e8a510d935e5 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -46,6 +46,8 @@ static u64		turbo_frequency;
 
 static u64		first_time, last_time;
 
+static int		power_only;
+
 
 static struct perf_header	*header;
 
@@ -547,7 +549,7 @@ static void end_sample_processing(void)
 	u64 cpu;
 	struct power_event *pwr;
 
-	for (cpu = 0; cpu < numcpus; cpu++) {
+	for (cpu = 0; cpu <= numcpus; cpu++) {
 		pwr = malloc(sizeof(struct power_event));
 		if (!pwr)
 			return;
@@ -763,19 +765,40 @@ static void draw_wakeups(void)
 					if (c->Y && c->start_time <= we->time && c->end_time >= we->time) {
 						if (p->pid == we->waker) {
 							from = c->Y;
-							task_from = c->comm;
+							task_from = strdup(c->comm);
 						}
 						if (p->pid == we->wakee) {
 							to = c->Y;
-							task_to = c->comm;
+							task_to = strdup(c->comm);
 						}
 					}
 					c = c->next;
 				}
+				c = p->all;
+				while (c) {
+					if (p->pid == we->waker && !from) {
+						from = c->Y;
+						task_from = strdup(c->comm);
+					}
+					if (p->pid == we->wakee && !to) {
+						to = c->Y;
+						task_to = strdup(c->comm);
+					}
+					c = c->next;
+				}
 			}
 			p = p->next;
 		}
 
+		if (!task_from) {
+			task_from = malloc(40);
+			sprintf(task_from, "[%i]", we->waker);
+		}
+		if (!task_to) {
+			task_to = malloc(40);
+			sprintf(task_to, "[%i]", we->wakee);
+		}
+
 		if (we->waker == -1)
 			svg_interrupt(we->time, to);
 		else if (from && to && abs(from - to) == 1)
@@ -783,6 +806,9 @@ static void draw_wakeups(void)
 		else
 			svg_partial_wakeline(we->time, from, task_from, to, task_to);
 		we = we->next;
+
+		free(task_from);
+		free(task_to);
 	}
 }
 
@@ -871,7 +897,7 @@ static int determine_display_tasks(u64 threshold)
 		/* no exit marker, task kept running to the end */
 		if (p->end_time == 0)
 			p->end_time = last_time;
-		if (p->total_time >= threshold)
+		if (p->total_time >= threshold && !power_only)
 			p->display = 1;
 
 		c = p->all;
@@ -882,7 +908,7 @@ static int determine_display_tasks(u64 threshold)
 			if (c->start_time == 1)
 				c->start_time = first_time;
 
-			if (c->total_time >= threshold) {
+			if (c->total_time >= threshold && !power_only) {
 				c->display = 1;
 				count++;
 			}
@@ -1134,6 +1160,8 @@ static const struct option options[] = {
 		    "output file name"),
 	OPT_INTEGER('w', "width", &svg_page_width,
 		    "page width"),
+	OPT_BOOLEAN('p', "power-only", &power_only,
+		    "output power data only"),
 	OPT_END()
 };
 
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 1ca88896eee4..a1b1d10912dc 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -686,6 +686,8 @@ static void handle_keypress(int c)
 	switch (c) {
 		case 'd':
 			prompt_integer(&delay_secs, "Enter display delay");
+			if (delay_secs < 1)
+				delay_secs = 1;
 			break;
 		case 'e':
 			prompt_integer(&print_entries, "Enter display entries (lines)");
@@ -782,6 +784,7 @@ static const char *skip_symbols[] = {
 	"exit_idle",
 	"mwait_idle",
 	"mwait_idle_with_hints",
+	"poll_idle",
 	"ppc64_runlatch_off",
 	"pseries_dedicated_idle_sleep",
 	NULL
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index e9d256e2f47d..0c5e4f72f2ba 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -219,10 +219,6 @@ remap:
 more:
 	event = (event_t *)(buf + head);
 
-	size = event->header.size;
-	if (!size)
-		size = 8;
-
 	if (head + event->header.size >= page_size * mmap_window) {
 		unsigned long shift = page_size * (head / page_size);
 		int res;
@@ -237,7 +233,6 @@ more:
 
 	size = event->header.size;
 
-
 	if (!size || process_event(event, offset, head) < 0) {
 
 		/*
@@ -290,7 +285,6 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 			usage_with_options(annotate_usage, options);
 	}
 
-
 	setup_pager();
 
 	return __cmd_trace();
diff --git a/tools/perf/design.txt b/tools/perf/design.txt
index f1946d107b10..fdd42a824c98 100644
--- a/tools/perf/design.txt
+++ b/tools/perf/design.txt
@@ -455,3 +455,6 @@ will need at least this:
 
 If your architecture does have hardware capabilities, you can override the
 weak stub hw_perf_event_init() to register hardware counters.
+
+Architectures that have d-cache aliassing issues, such as Sparc and ARM,
+should select PERF_USE_VMALLOC in order to avoid these for perf mmap().
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index c561d1538c03..54552a00a117 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 GVF=PERF-VERSION-FILE
-DEF_VER=v0.0.1.PERF
+DEF_VER=v0.0.2.PERF
 
 LF='
 '
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 87c424de79ee..8cfb48cbbea0 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -691,7 +691,10 @@ static void store_event_type(const char *orgname)
 	FILE *file;
 	int id;
 
-	sprintf(filename, "/sys/kernel/debug/tracing/events/%s/id", orgname);
+	sprintf(filename, "%s/", debugfs_path);
+	strncat(filename, orgname, strlen(orgname));
+	strcat(filename, "/id");
+
 	c = strchr(filename, ':');
 	if (c)
 		*c = '/';
diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c
index a778fd0f4ae4..b3637db025a2 100644
--- a/tools/perf/util/svghelper.c
+++ b/tools/perf/util/svghelper.c
@@ -28,7 +28,7 @@ static u64 turbo_frequency, max_freq;
 
 int svg_page_width = 1000;
 
-#define MIN_TEXT_SIZE 0.001
+#define MIN_TEXT_SIZE 0.01
 
 static u64 total_height;
 static FILE *svgfile;
@@ -103,7 +103,7 @@ void open_svg(const char *filename, int cpus, int rows, u64 start, u64 end)
 	fprintf(svgfile, "      rect.process2 { fill:rgb(180,180,180); fill-opacity:0.9; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
 	fprintf(svgfile, "      rect.sample   { fill:rgb(  0,  0,255); fill-opacity:0.8; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
 	fprintf(svgfile, "      rect.blocked  { fill:rgb(255,  0,  0); fill-opacity:0.5; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
-	fprintf(svgfile, "      rect.waiting  { fill:rgb(214,214,  0); fill-opacity:0.3; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
+	fprintf(svgfile, "      rect.waiting  { fill:rgb(224,214,  0); fill-opacity:0.8; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
 	fprintf(svgfile, "      rect.WAITING  { fill:rgb(255,214, 48); fill-opacity:0.6; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
 	fprintf(svgfile, "      rect.cpu      { fill:rgb(192,192,192); fill-opacity:0.2; stroke-width:0.5; stroke:rgb(128,128,128); } \n");
 	fprintf(svgfile, "      rect.pstate   { fill:rgb(128,128,128); fill-opacity:0.8; stroke-width:0; } \n");
@@ -217,6 +217,18 @@ static char *cpu_model(void)
 		}
 		fclose(file);
 	}
+
+	/* CPU type */
+	file = fopen("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", "r");
+	if (file) {
+		while (fgets(buf, 255, file)) {
+			unsigned int freq;
+			freq = strtoull(buf, NULL, 10);
+			if (freq > max_freq)
+				max_freq = freq;
+		}
+		fclose(file);
+	}
 	return cpu_m;
 }
 
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 559fb06210f5..47ea0609a760 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -324,8 +324,7 @@ static inline int elf_sym__is_function(const GElf_Sym *sym)
 {
 	return elf_sym__type(sym) == STT_FUNC &&
 	       sym->st_name != 0 &&
-	       sym->st_shndx != SHN_UNDEF &&
-	       sym->st_size != 0;
+	       sym->st_shndx != SHN_UNDEF;
 }
 
 static inline int elf_sym__is_label(const GElf_Sym *sym)
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index f6a8437141c8..55c9659a56e2 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -618,7 +618,7 @@ static int test_type(enum event_type type, enum event_type expect)
 }
 
 static int test_type_token(enum event_type type, char *token,
-		    enum event_type expect, char *expect_tok)
+		    enum event_type expect, const char *expect_tok)
 {
 	if (type != expect) {
 		die("Error: expected type %d but read %d",
@@ -650,7 +650,7 @@ static int read_expect_type(enum event_type expect, char **tok)
 	return __read_expect_type(expect, tok, 1);
 }
 
-static int __read_expected(enum event_type expect, char *str, int newline_ok)
+static int __read_expected(enum event_type expect, const char *str, int newline_ok)
 {
 	enum event_type type;
 	char *token;
@@ -668,12 +668,12 @@ static int __read_expected(enum event_type expect, char *str, int newline_ok)
 	return 0;
 }
 
-static int read_expected(enum event_type expect, char *str)
+static int read_expected(enum event_type expect, const char *str)
 {
 	return __read_expected(expect, str, 1);
 }
 
-static int read_expected_item(enum event_type expect, char *str)
+static int read_expected_item(enum event_type expect, const char *str)
 {
 	return __read_expected(expect, str, 0);
 }
@@ -1968,10 +1968,11 @@ static const struct flag flags[] = {
 	{ "NET_TX_SOFTIRQ", 2 },
 	{ "NET_RX_SOFTIRQ", 3 },
 	{ "BLOCK_SOFTIRQ", 4 },
-	{ "TASKLET_SOFTIRQ", 5 },
-	{ "SCHED_SOFTIRQ", 6 },
-	{ "HRTIMER_SOFTIRQ", 7 },
-	{ "RCU_SOFTIRQ", 8 },
+	{ "BLOCK_IOPOLL_SOFTIRQ", 5 },
+	{ "TASKLET_SOFTIRQ", 6 },
+	{ "SCHED_SOFTIRQ", 7 },
+	{ "HRTIMER_SOFTIRQ", 8 },
+	{ "RCU_SOFTIRQ", 9 },
 
 	{ "HRTIMER_NORESTART", 0 },
 	{ "HRTIMER_RESTART", 1 },
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index b5e7e3f1183f..7495ce347344 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -850,6 +850,19 @@ static void kvm_mmu_notifier_invalidate_page(struct mmu_notifier *mn,
 
 }
 
+static void kvm_mmu_notifier_change_pte(struct mmu_notifier *mn,
+					struct mm_struct *mm,
+					unsigned long address,
+					pte_t pte)
+{
+	struct kvm *kvm = mmu_notifier_to_kvm(mn);
+
+	spin_lock(&kvm->mmu_lock);
+	kvm->mmu_notifier_seq++;
+	kvm_set_spte_hva(kvm, address, pte);
+	spin_unlock(&kvm->mmu_lock);
+}
+
 static void kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn,
 						    struct mm_struct *mm,
 						    unsigned long start,
@@ -929,6 +942,7 @@ static const struct mmu_notifier_ops kvm_mmu_notifier_ops = {
 	.invalidate_range_start	= kvm_mmu_notifier_invalidate_range_start,
 	.invalidate_range_end	= kvm_mmu_notifier_invalidate_range_end,
 	.clear_flush_young	= kvm_mmu_notifier_clear_flush_young,
+	.change_pte		= kvm_mmu_notifier_change_pte,
 	.release		= kvm_mmu_notifier_release,
 };
 #endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */
@@ -2625,7 +2639,7 @@ static int vcpu_stat_get(void *_offset, u64 *val)
 
 DEFINE_SIMPLE_ATTRIBUTE(vcpu_stat_fops, vcpu_stat_get, NULL, "%llu\n");
 
-static struct file_operations *stat_fops[] = {
+static const struct file_operations *stat_fops[] = {
 	[KVM_STAT_VCPU] = &vcpu_stat_fops,
 	[KVM_STAT_VM]   = &vm_stat_fops,
 };
@@ -2703,8 +2717,6 @@ int kvm_init(void *opaque, unsigned int vcpu_size,
 	int r;
 	int cpu;
 
-	kvm_init_debug();
-
 	r = kvm_arch_init(opaque);
 	if (r)
 		goto out_fail;
@@ -2771,6 +2783,8 @@ int kvm_init(void *opaque, unsigned int vcpu_size,
 	kvm_preempt_ops.sched_in = kvm_sched_in;
 	kvm_preempt_ops.sched_out = kvm_sched_out;
 
+	kvm_init_debug();
+
 	return 0;
 
 out_free:
@@ -2793,7 +2807,6 @@ out_free_0:
 out:
 	kvm_arch_exit();
 out_fail:
-	kvm_exit_debug();
 	return r;
 }
 EXPORT_SYMBOL_GPL(kvm_init);
@@ -2801,6 +2814,7 @@ EXPORT_SYMBOL_GPL(kvm_init);
 void kvm_exit(void)
 {
 	tracepoint_synchronize_unregister();
+	kvm_exit_debug();
 	misc_deregister(&kvm_dev);
 	kmem_cache_destroy(kvm_vcpu_cache);
 	sysdev_unregister(&kvm_sysdev);
@@ -2810,7 +2824,6 @@ void kvm_exit(void)
 	on_each_cpu(hardware_disable, NULL, 1);
 	kvm_arch_hardware_unsetup();
 	kvm_arch_exit();
-	kvm_exit_debug();
 	free_cpumask_var(cpus_hardware_enabled);
 	__free_page(bad_page);
 }