diff options
| -rw-r--r-- | drivers/iio/pressure/st_pressure_core.c | 28 | ||||
| -rw-r--r-- | include/linux/iio/common/st_sensors.h | 3 |
2 files changed, 31 insertions, 0 deletions
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 2da411b6925b..baeab109f41d 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -23,6 +23,7 @@ #include <linux/iio/sysfs.h> #include <linux/iio/trigger.h> #include <linux/iio/buffer.h> +#include <linux/regulator/consumer.h> #include <asm/unaligned.h> #include <linux/iio/common/st_sensors.h> @@ -313,6 +314,29 @@ static const struct iio_trigger_ops st_press_trigger_ops = { #define ST_PRESS_TRIGGER_OPS NULL #endif +static void st_press_power_enable(struct iio_dev *indio_dev) +{ + struct st_sensor_data *pdata = iio_priv(indio_dev); + int err; + + /* Regulators not mandatory, but if requested we should enable it. */ + pdata->vdd = devm_regulator_get_optional(&indio_dev->dev, "vdd"); + if (!IS_ERR(pdata->vdd)) { + err = regulator_enable(pdata->vdd); + if (err != 0) + dev_warn(&indio_dev->dev, + "Failed to enable specified Vdd supply\n"); + } +} + +static void st_press_power_disable(struct iio_dev *indio_dev) +{ + struct st_sensor_data *pdata = iio_priv(indio_dev); + + if (!IS_ERR(pdata->vdd)) + regulator_disable(pdata->vdd); +} + int st_press_common_probe(struct iio_dev *indio_dev, struct st_sensors_platform_data *plat_data) { @@ -323,6 +347,8 @@ int st_press_common_probe(struct iio_dev *indio_dev, indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &press_info; + st_press_power_enable(indio_dev); + err = st_sensors_check_device_support(indio_dev, ARRAY_SIZE(st_press_sensors), st_press_sensors); @@ -380,6 +406,8 @@ void st_press_common_remove(struct iio_dev *indio_dev) { struct st_sensor_data *pdata = iio_priv(indio_dev); + st_press_power_disable(indio_dev); + iio_device_unregister(indio_dev); if (pdata->get_irq_data_ready(indio_dev) > 0) st_sensors_deallocate_trigger(indio_dev); diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index e732fda6c8e6..968b84e5f380 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -16,6 +16,7 @@ #include <linux/irqreturn.h> #include <linux/iio/trigger.h> #include <linux/bitops.h> +#include <linux/regulator/consumer.h> #include <linux/platform_data/st_sensors_pdata.h> @@ -201,6 +202,7 @@ struct st_sensors { * @trig: The trigger in use by the core driver. * @sensor: Pointer to the current sensor struct in use. * @current_fullscale: Maximum range of measure by the sensor. + * @vdd: Pointer to sensor's Vdd power supply * @enabled: Status of the sensor (false->off, true->on). * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread. * @buffer_data: Data used by buffer part. @@ -216,6 +218,7 @@ struct st_sensor_data { struct iio_trigger *trig; struct st_sensors *sensor; struct st_sensor_fullscale_avl *current_fullscale; + struct regulator *vdd; bool enabled; bool multiread_bit; |
