summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/input/mouse/cyapa.c22
-rw-r--r--drivers/input/mouse/cyapa.h14
-rw-r--r--drivers/input/mouse/cyapa_gen3.c108
-rw-r--r--drivers/input/mouse/cyapa_gen5.c99
-rw-r--r--drivers/input/mouse/cyapa_gen6.c4
5 files changed, 188 insertions, 59 deletions
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index eb76b61418f3..dc2394292088 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -383,7 +383,7 @@ static int cyapa_open(struct input_dev *input)
* when in operational mode.
*/
error = cyapa->ops->set_power_mode(cyapa,
- PWR_MODE_FULL_ACTIVE, 0, false);
+ PWR_MODE_FULL_ACTIVE, 0, CYAPA_PM_ACTIVE);
if (error) {
dev_warn(dev, "set active power failed: %d\n", error);
goto out;
@@ -424,7 +424,8 @@ static void cyapa_close(struct input_dev *input)
pm_runtime_set_suspended(dev);
if (cyapa->operational)
- cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0, false);
+ cyapa->ops->set_power_mode(cyapa,
+ PWR_MODE_OFF, 0, CYAPA_PM_DEACTIVE);
mutex_unlock(&cyapa->state_sync_lock);
}
@@ -534,7 +535,7 @@ static void cyapa_enable_irq_for_cmd(struct cyapa *cyapa)
*/
if (!input || cyapa->operational)
cyapa->ops->set_power_mode(cyapa,
- PWR_MODE_FULL_ACTIVE, 0, false);
+ PWR_MODE_FULL_ACTIVE, 0, CYAPA_PM_ACTIVE);
/* Gen3 always using polling mode for command. */
if (cyapa->gen >= CYAPA_GEN5)
enable_irq(cyapa->client->irq);
@@ -550,7 +551,7 @@ static void cyapa_disable_irq_for_cmd(struct cyapa *cyapa)
disable_irq(cyapa->client->irq);
if (!input || cyapa->operational)
cyapa->ops->set_power_mode(cyapa,
- PWR_MODE_OFF, 0, false);
+ PWR_MODE_OFF, 0, CYAPA_PM_ACTIVE);
}
}
@@ -617,7 +618,8 @@ static int cyapa_initialize(struct cyapa *cyapa)
/* Power down the device until we need it. */
if (cyapa->operational)
- cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0, false);
+ cyapa->ops->set_power_mode(cyapa,
+ PWR_MODE_OFF, 0, CYAPA_PM_ACTIVE);
return 0;
}
@@ -634,7 +636,7 @@ static int cyapa_reinitialize(struct cyapa *cyapa)
/* Avoid command failures when TP was in OFF state. */
if (cyapa->operational)
cyapa->ops->set_power_mode(cyapa,
- PWR_MODE_FULL_ACTIVE, 0, false);
+ PWR_MODE_FULL_ACTIVE, 0, CYAPA_PM_ACTIVE);
error = cyapa_detect(cyapa);
if (error)
@@ -654,7 +656,7 @@ out:
/* Reset to power OFF state to save power when no user open. */
if (cyapa->operational)
cyapa->ops->set_power_mode(cyapa,
- PWR_MODE_OFF, 0, false);
+ PWR_MODE_OFF, 0, CYAPA_PM_DEACTIVE);
} else if (!error && cyapa->operational) {
/*
* Make sure only enable runtime PM when device is
@@ -1392,7 +1394,7 @@ static int __maybe_unused cyapa_suspend(struct device *dev)
power_mode = device_may_wakeup(dev) ? cyapa->suspend_power_mode
: PWR_MODE_OFF;
error = cyapa->ops->set_power_mode(cyapa, power_mode,
- cyapa->suspend_sleep_time, true);
+ cyapa->suspend_sleep_time, CYAPA_PM_SUSPEND);
if (error)
dev_err(dev, "suspend set power mode failed: %d\n",
error);
@@ -1447,7 +1449,7 @@ static int __maybe_unused cyapa_runtime_suspend(struct device *dev)
error = cyapa->ops->set_power_mode(cyapa,
cyapa->runtime_suspend_power_mode,
cyapa->runtime_suspend_sleep_time,
- false);
+ CYAPA_PM_RUNTIME_SUSPEND);
if (error)
dev_warn(dev, "runtime suspend failed: %d\n", error);
@@ -1460,7 +1462,7 @@ static int __maybe_unused cyapa_runtime_resume(struct device *dev)
int error;
error = cyapa->ops->set_power_mode(cyapa,
- PWR_MODE_FULL_ACTIVE, 0, false);
+ PWR_MODE_FULL_ACTIVE, 0, CYAPA_PM_RUNTIME_RESUME);
if (error)
dev_warn(dev, "runtime resume failed: %d\n", error);
diff --git a/drivers/input/mouse/cyapa.h b/drivers/input/mouse/cyapa.h
index b812bba8cdd7..ce951fe4516a 100644
--- a/drivers/input/mouse/cyapa.h
+++ b/drivers/input/mouse/cyapa.h
@@ -250,6 +250,15 @@ struct cyapa;
typedef bool (*cb_sort)(struct cyapa *, u8 *, int);
+enum cyapa_pm_stage {
+ CYAPA_PM_DEACTIVE,
+ CYAPA_PM_ACTIVE,
+ CYAPA_PM_SUSPEND,
+ CYAPA_PM_RESUME,
+ CYAPA_PM_RUNTIME_SUSPEND,
+ CYAPA_PM_RUNTIME_RESUME,
+};
+
struct cyapa_dev_ops {
int (*check_fw)(struct cyapa *, const struct firmware *);
int (*bl_enter)(struct cyapa *);
@@ -273,7 +282,7 @@ struct cyapa_dev_ops {
int (*sort_empty_output_data)(struct cyapa *,
u8 *, int *, cb_sort);
- int (*set_power_mode)(struct cyapa *, u8, u16, bool);
+ int (*set_power_mode)(struct cyapa *, u8, u16, enum cyapa_pm_stage);
int (*set_proximity)(struct cyapa *, bool);
};
@@ -289,6 +298,9 @@ struct cyapa_pip_cmd_states {
u8 *resp_data;
int *resp_len;
+ enum cyapa_pm_stage pm_stage;
+ struct mutex pm_stage_lock;
+
u8 irq_cmd_buf[CYAPA_REG_MAP_SIZE];
u8 empty_buf[CYAPA_REG_MAP_SIZE];
};
diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c
index 1a9d12ae7538..f9600753eca5 100644
--- a/drivers/input/mouse/cyapa_gen3.c
+++ b/drivers/input/mouse/cyapa_gen3.c
@@ -269,6 +269,7 @@ static const struct cyapa_cmd_len cyapa_smbus_cmds[] = {
{ CYAPA_SMBUS_MIN_BASELINE, 1 }, /* CYAPA_CMD_MIN_BASELINE */
};
+static int cyapa_gen3_try_poll_handler(struct cyapa *cyapa);
/*
* cyapa_smbus_read_block - perform smbus block read command
@@ -950,12 +951,14 @@ static u16 cyapa_get_wait_time_for_pwr_cmd(u8 pwr_mode)
* Device power mode can only be set when device is in operational mode.
*/
static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode,
- u16 always_unused, bool is_suspend_unused)
+ u16 always_unused, enum cyapa_pm_stage pm_stage)
{
- int ret;
+ struct input_dev *input = cyapa->input;
u8 power;
int tries;
- u16 sleep_time;
+ int sleep_time;
+ int interval;
+ int ret;
if (cyapa->state != CYAPA_STATE_OP)
return 0;
@@ -977,7 +980,7 @@ static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode,
if ((ret & PWR_MODE_MASK) == power_mode)
return 0;
- sleep_time = cyapa_get_wait_time_for_pwr_cmd(ret & PWR_MODE_MASK);
+ sleep_time = (int)cyapa_get_wait_time_for_pwr_cmd(ret & PWR_MODE_MASK);
power = ret;
power &= ~PWR_MODE_MASK;
power |= power_mode & PWR_MODE_MASK;
@@ -995,7 +998,23 @@ static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode,
* doing so before issuing the next command may result in errors
* depending on the command's content.
*/
- msleep(sleep_time);
+ if (cyapa->operational && input && input->users &&
+ (pm_stage == CYAPA_PM_RUNTIME_SUSPEND ||
+ pm_stage == CYAPA_PM_RUNTIME_RESUME)) {
+ /* Try to polling in 120Hz, read may fail, just ignore it. */
+ interval = 1000 / 120;
+ while (sleep_time > 0) {
+ if (sleep_time > interval)
+ msleep(interval);
+ else
+ msleep(sleep_time);
+ sleep_time -= interval;
+ cyapa_gen3_try_poll_handler(cyapa);
+ }
+ } else {
+ msleep(sleep_time);
+ }
+
return ret;
}
@@ -1112,7 +1131,7 @@ static int cyapa_gen3_do_operational_check(struct cyapa *cyapa)
* may cause problems, so we set the power mode first here.
*/
error = cyapa_gen3_set_power_mode(cyapa,
- PWR_MODE_FULL_ACTIVE, 0, false);
+ PWR_MODE_FULL_ACTIVE, 0, CYAPA_PM_ACTIVE);
if (error)
dev_err(dev, "%s: set full power mode failed: %d\n",
__func__, error);
@@ -1168,32 +1187,16 @@ static bool cyapa_gen3_irq_cmd_handler(struct cyapa *cyapa)
return false;
}
-static int cyapa_gen3_irq_handler(struct cyapa *cyapa)
+static int cyapa_gen3_event_process(struct cyapa *cyapa,
+ struct cyapa_reg_data *data)
{
struct input_dev *input = cyapa->input;
- struct device *dev = &cyapa->client->dev;
- struct cyapa_reg_data data;
int num_fingers;
- int ret;
int i;
- ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data);
- if (ret != sizeof(data)) {
- dev_err(dev, "failed to read report data, (%d)\n", ret);
- return -EINVAL;
- }
-
- if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC ||
- (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL ||
- (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) {
- dev_err(dev, "invalid device state bytes, %02x %02x\n",
- data.device_status, data.finger_btn);
- return -EINVAL;
- }
-
- num_fingers = (data.finger_btn >> 4) & 0x0f;
+ num_fingers = (data->finger_btn >> 4) & 0x0f;
for (i = 0; i < num_fingers; i++) {
- const struct cyapa_touch *touch = &data.touches[i];
+ const struct cyapa_touch *touch = &data->touches[i];
/* Note: touch->id range is 1 to 15; slots are 0 to 14. */
int slot = touch->id - 1;
@@ -1210,18 +1213,65 @@ static int cyapa_gen3_irq_handler(struct cyapa *cyapa)
if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK)
input_report_key(input, BTN_LEFT,
- !!(data.finger_btn & OP_DATA_LEFT_BTN));
+ !!(data->finger_btn & OP_DATA_LEFT_BTN));
if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK)
input_report_key(input, BTN_MIDDLE,
- !!(data.finger_btn & OP_DATA_MIDDLE_BTN));
+ !!(data->finger_btn & OP_DATA_MIDDLE_BTN));
if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK)
input_report_key(input, BTN_RIGHT,
- !!(data.finger_btn & OP_DATA_RIGHT_BTN));
+ !!(data->finger_btn & OP_DATA_RIGHT_BTN));
input_sync(input);
return 0;
}
+static int cyapa_gen3_irq_handler(struct cyapa *cyapa)
+{
+ struct device *dev = &cyapa->client->dev;
+ struct cyapa_reg_data data;
+ int ret;
+
+ ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data);
+ if (ret != sizeof(data)) {
+ dev_err(dev, "failed to read report data, (%d)\n", ret);
+ return -EINVAL;
+ }
+
+ if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC ||
+ (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL ||
+ (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) {
+ dev_err(dev, "invalid device state bytes: %02x %02x\n",
+ data.device_status, data.finger_btn);
+ return -EINVAL;
+ }
+
+ return cyapa_gen3_event_process(cyapa, &data);
+}
+
+/*
+ * This function will be called in the cyapa_gen3_set_power_mode function,
+ * and it's known that it may failed in some situation after the set power
+ * mode command was sent. So this function is aimed to avoid the knwon
+ * and unwanted output I2C and data parse error messages.
+ */
+static int cyapa_gen3_try_poll_handler(struct cyapa *cyapa)
+{
+ struct cyapa_reg_data data;
+ int ret;
+
+ ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data);
+ if (ret != sizeof(data))
+ return -EINVAL;
+
+ if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC ||
+ (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL ||
+ (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID)
+ return -EINVAL;
+
+ return cyapa_gen3_event_process(cyapa, &data);
+
+}
+
static int cyapa_gen3_initialize(struct cyapa *cyapa) { return 0; }
static int cyapa_gen3_bl_initiate(struct cyapa *cyapa,
const struct firmware *fw) { return 0; }
diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c
index 118ba977181e..5775d40b3d53 100644
--- a/drivers/input/mouse/cyapa_gen5.c
+++ b/drivers/input/mouse/cyapa_gen5.c
@@ -342,6 +342,9 @@ u8 pip_bl_read_app_info[] = { 0x04, 0x00, 0x0b, 0x00, 0x40, 0x00,
static u8 cyapa_pip_bl_cmd_key[] = { 0xa5, 0x01, 0x02, 0x03,
0xff, 0xfe, 0xfd, 0x5a };
+static int cyapa_pip_event_process(struct cyapa *cyapa,
+ struct cyapa_pip_report_data *report_data);
+
int cyapa_pip_cmd_state_initialize(struct cyapa *cyapa)
{
struct cyapa_pip_cmd_states *pip = &cyapa->cmd_states.pip;
@@ -350,6 +353,9 @@ int cyapa_pip_cmd_state_initialize(struct cyapa *cyapa)
atomic_set(&pip->cmd_issued, 0);
mutex_init(&pip->cmd_lock);
+ mutex_init(&pip->pm_stage_lock);
+ pip->pm_stage = CYAPA_PM_DEACTIVE;
+
pip->resp_sort_func = NULL;
pip->in_progress_cmd = PIP_INVALID_CMD;
pip->resp_data = NULL;
@@ -397,6 +403,38 @@ ssize_t cyapa_i2c_pip_write(struct cyapa *cyapa, u8 *buf, size_t size)
return 0;
}
+static void cyapa_set_pip_pm_state(struct cyapa *cyapa,
+ enum cyapa_pm_stage pm_stage)
+{
+ struct cyapa_pip_cmd_states *pip = &cyapa->cmd_states.pip;
+
+ mutex_lock(&pip->pm_stage_lock);
+ pip->pm_stage = pm_stage;
+ mutex_unlock(&pip->pm_stage_lock);
+}
+
+static void cyapa_reset_pip_pm_state(struct cyapa *cyapa)
+{
+ struct cyapa_pip_cmd_states *pip = &cyapa->cmd_states.pip;
+
+ /* Indicates the pip->pm_stage is not valid. */
+ mutex_lock(&pip->pm_stage_lock);
+ pip->pm_stage = CYAPA_PM_DEACTIVE;
+ mutex_unlock(&pip->pm_stage_lock);
+}
+
+static enum cyapa_pm_stage cyapa_get_pip_pm_state(struct cyapa *cyapa)
+{
+ struct cyapa_pip_cmd_states *pip = &cyapa->cmd_states.pip;
+ enum cyapa_pm_stage pm_stage;
+
+ mutex_lock(&pip->pm_stage_lock);
+ pm_stage = pip->pm_stage;
+ mutex_unlock(&pip->pm_stage_lock);
+
+ return pm_stage;
+}
+
/**
* This function is aimed to dump all not read data in Gen5 trackpad
* before send any command, otherwise, the interrupt line will be blocked.
@@ -404,7 +442,9 @@ ssize_t cyapa_i2c_pip_write(struct cyapa *cyapa, u8 *buf, size_t size)
int cyapa_empty_pip_output_data(struct cyapa *cyapa,
u8 *buf, int *len, cb_sort func)
{
+ struct input_dev *input = cyapa->input;
struct cyapa_pip_cmd_states *pip = &cyapa->cmd_states.pip;
+ enum cyapa_pm_stage pm_stage = cyapa_get_pip_pm_state(cyapa);
int length;
int report_count;
int empty_count;
@@ -478,6 +518,12 @@ int cyapa_empty_pip_output_data(struct cyapa *cyapa,
*len = length;
/* Response found, success. */
return 0;
+ } else if (cyapa->operational && input && input->users &&
+ (pm_stage == CYAPA_PM_RUNTIME_RESUME ||
+ pm_stage == CYAPA_PM_RUNTIME_SUSPEND)) {
+ /* Parse the data and report it if it's valid. */
+ cyapa_pip_event_process(cyapa,
+ (struct cyapa_pip_report_data *)pip->empty_buf);
}
error = -EINVAL;
@@ -1566,15 +1612,17 @@ int cyapa_pip_deep_sleep(struct cyapa *cyapa, u8 state)
}
static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
- u8 power_mode, u16 sleep_time, bool is_suspend)
+ u8 power_mode, u16 sleep_time, enum cyapa_pm_stage pm_stage)
{
struct device *dev = &cyapa->client->dev;
u8 power_state;
- int error;
+ int error = 0;
if (cyapa->state != CYAPA_STATE_GEN5_APP)
return 0;
+ cyapa_set_pip_pm_state(cyapa, pm_stage);
+
if (PIP_DEV_GET_PWR_STATE(cyapa) == UNINIT_PWR_MODE) {
/*
* Assume TP in deep sleep mode when driver is loaded,
@@ -1597,7 +1645,7 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
power_mode == PWR_MODE_BTN_ONLY ||
PIP_DEV_GET_SLEEP_TIME(cyapa) == sleep_time) {
/* Has in correct power mode state, early return. */
- return 0;
+ goto out;
}
}
@@ -1605,11 +1653,11 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
error = cyapa_pip_deep_sleep(cyapa, PIP_DEEP_SLEEP_STATE_OFF);
if (error) {
dev_err(dev, "enter deep sleep fail: %d\n", error);
- return error;
+ goto out;
}
PIP_DEV_SET_PWR_STATE(cyapa, PWR_MODE_OFF);
- return 0;
+ goto out;
}
/*
@@ -1621,7 +1669,7 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
error = cyapa_pip_deep_sleep(cyapa, PIP_DEEP_SLEEP_STATE_ON);
if (error) {
dev_err(dev, "deep sleep wake fail: %d\n", error);
- return error;
+ goto out;
}
}
@@ -1630,7 +1678,7 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
GEN5_POWER_STATE_ACTIVE);
if (error) {
dev_err(dev, "change to active fail: %d\n", error);
- return error;
+ goto out;
}
PIP_DEV_SET_PWR_STATE(cyapa, PWR_MODE_FULL_ACTIVE);
@@ -1639,7 +1687,7 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
GEN5_POWER_STATE_BTN_ONLY);
if (error) {
dev_err(dev, "fail to button only mode: %d\n", error);
- return error;
+ goto out;
}
PIP_DEV_SET_PWR_STATE(cyapa, PWR_MODE_BTN_ONLY);
@@ -1664,7 +1712,7 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
if (error) {
dev_err(dev, "set power state to 0x%02x failed: %d\n",
power_state, error);
- return error;
+ goto out;
}
/*
@@ -1677,14 +1725,16 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
* is suspending which may cause interrupt line unable to be
* asserted again.
*/
- if (is_suspend)
+ if (pm_stage == CYAPA_PM_SUSPEND)
cyapa_gen5_disable_pip_report(cyapa);
PIP_DEV_SET_PWR_STATE(cyapa,
cyapa_sleep_time_to_pwr_cmd(sleep_time));
}
- return 0;
+out:
+ cyapa_reset_pip_pm_state(cyapa);
+ return error;
}
int cyapa_pip_resume_scanning(struct cyapa *cyapa)
@@ -2513,7 +2563,7 @@ static int cyapa_gen5_do_operational_check(struct cyapa *cyapa)
* the device state is required.
*/
error = cyapa_gen5_set_power_mode(cyapa,
- PWR_MODE_FULL_ACTIVE, 0, false);
+ PWR_MODE_FULL_ACTIVE, 0, CYAPA_PM_ACTIVE);
if (error)
dev_warn(dev, "%s: failed to set power active mode.\n",
__func__);
@@ -2715,7 +2765,6 @@ int cyapa_pip_irq_handler(struct cyapa *cyapa)
struct device *dev = &cyapa->client->dev;
struct cyapa_pip_report_data report_data;
unsigned int report_len;
- u8 report_id;
int ret;
if (!cyapa_is_pip_app_mode(cyapa)) {
@@ -2752,7 +2801,23 @@ int cyapa_pip_irq_handler(struct cyapa *cyapa)
return -EINVAL;
}
- report_id = report_data.report_head[PIP_RESP_REPORT_ID_OFFSET];
+ return cyapa_pip_event_process(cyapa, &report_data);
+}
+
+static int cyapa_pip_event_process(struct cyapa *cyapa,
+ struct cyapa_pip_report_data *report_data)
+{
+ struct device *dev = &cyapa->client->dev;
+ unsigned int report_len;
+ u8 report_id;
+
+ report_len = get_unaligned_le16(
+ &report_data->report_head[PIP_RESP_LENGTH_OFFSET]);
+ /* Idle, no data for report. */
+ if (report_len == PIP_RESP_LENGTH_SIZE)
+ return 0;
+
+ report_id = report_data->report_head[PIP_RESP_REPORT_ID_OFFSET];
if (report_id == PIP_WAKEUP_EVENT_REPORT_ID &&
report_len == PIP_WAKEUP_EVENT_SIZE) {
/*
@@ -2805,11 +2870,11 @@ int cyapa_pip_irq_handler(struct cyapa *cyapa)
}
if (report_id == PIP_TOUCH_REPORT_ID)
- cyapa_pip_report_touches(cyapa, &report_data);
+ cyapa_pip_report_touches(cyapa, report_data);
else if (report_id == PIP_PROXIMITY_REPORT_ID)
- cyapa_pip_report_proximity(cyapa, &report_data);
+ cyapa_pip_report_proximity(cyapa, report_data);
else
- cyapa_pip_report_buttons(cyapa, &report_data);
+ cyapa_pip_report_buttons(cyapa, report_data);
return 0;
}
diff --git a/drivers/input/mouse/cyapa_gen6.c b/drivers/input/mouse/cyapa_gen6.c
index e4eb048d1bf6..016397850b1b 100644
--- a/drivers/input/mouse/cyapa_gen6.c
+++ b/drivers/input/mouse/cyapa_gen6.c
@@ -425,7 +425,7 @@ static int cyapa_gen6_deep_sleep(struct cyapa *cyapa, u8 state)
}
static int cyapa_gen6_set_power_mode(struct cyapa *cyapa,
- u8 power_mode, u16 sleep_time, bool is_suspend)
+ u8 power_mode, u16 sleep_time, enum cyapa_pm_stage pm_stage)
{
struct device *dev = &cyapa->client->dev;
struct gen6_interval_setting *interval_setting =
@@ -689,7 +689,7 @@ static int cyapa_gen6_operational_check(struct cyapa *cyapa)
* the device state is required.
*/
error = cyapa_gen6_set_power_mode(cyapa,
- PWR_MODE_FULL_ACTIVE, 0, false);
+ PWR_MODE_FULL_ACTIVE, 0, CYAPA_PM_ACTIVE);
if (error)
dev_warn(dev, "%s: failed to set power active mode.\n",
__func__);
OpenPOWER on IntegriCloud