summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--include/net/cfg80211.h1
-rw-r--r--net/mac80211/mlme.c35
-rw-r--r--net/mac80211/wpa.c11
-rw-r--r--net/wireless/mlme.c12
4 files changed, 35 insertions, 24 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1b4989082244..f8cd4cf3fad8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1218,6 +1218,7 @@ struct cfg80211_deauth_request {
const u8 *ie;
size_t ie_len;
u16 reason_code;
+ bool local_state_change;
};
/**
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e714ed8bb198..1b7eed252fe9 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3099,22 +3099,32 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
ht_cfreq, ht_oper->primary_chan,
cbss->channel->band);
ht_oper = NULL;
+ } else {
+ channel_type = NL80211_CHAN_HT20;
}
}
- if (ht_oper) {
- channel_type = NL80211_CHAN_HT20;
+ if (ht_oper && sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+ /*
+ * cfg80211 already verified that the channel itself can
+ * be used, but it didn't check that we can do the right
+ * HT type, so do that here as well. If HT40 isn't allowed
+ * on this channel, disable 40 MHz operation.
+ */
- if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
- switch (ht_oper->ht_param &
- IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
- case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40PLUS)
+ ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ;
+ else
channel_type = NL80211_CHAN_HT40PLUS;
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40MINUS)
+ ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ;
+ else
channel_type = NL80211_CHAN_HT40MINUS;
- break;
- }
+ break;
}
}
@@ -3549,6 +3559,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+ bool tx = !req->local_state_change;
mutex_lock(&ifmgd->mtx);
@@ -3565,12 +3576,12 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
if (ifmgd->associated &&
ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
- req->reason_code, true, frame_buf);
+ req->reason_code, tx, frame_buf);
} else {
drv_mgd_prepare_tx(sdata->local, sdata);
ieee80211_send_deauth_disassoc(sdata, req->bssid,
IEEE80211_STYPE_DEAUTH,
- req->reason_code, true,
+ req->reason_code, tx,
frame_buf);
}
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index e72562a18bad..8bd2f5c6a56e 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -546,14 +546,19 @@ ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx)
static void bip_aad(struct sk_buff *skb, u8 *aad)
{
+ __le16 mask_fc;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+
/* BIP AAD: FC(masked) || A1 || A2 || A3 */
/* FC type/subtype */
- aad[0] = skb->data[0];
/* Mask FC Retry, PwrMgt, MoreData flags to zero */
- aad[1] = skb->data[1] & ~(BIT(4) | BIT(5) | BIT(6));
+ mask_fc = hdr->frame_control;
+ mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY | IEEE80211_FCTL_PM |
+ IEEE80211_FCTL_MOREDATA);
+ put_unaligned(mask_fc, (__le16 *) &aad[0]);
/* A1 || A2 || A3 */
- memcpy(aad + 2, skb->data + 4, 3 * ETH_ALEN);
+ memcpy(aad + 2, &hdr->addr1, 3 * ETH_ALEN);
}
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 8016fee0752b..904a7f368325 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -457,20 +457,14 @@ int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev,
.reason_code = reason,
.ie = ie,
.ie_len = ie_len,
+ .local_state_change = local_state_change,
};
ASSERT_WDEV_LOCK(wdev);
- if (local_state_change) {
- if (wdev->current_bss &&
- ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) {
- cfg80211_unhold_bss(wdev->current_bss);
- cfg80211_put_bss(&wdev->current_bss->pub);
- wdev->current_bss = NULL;
- }
-
+ if (local_state_change && (!wdev->current_bss ||
+ !ether_addr_equal(wdev->current_bss->pub.bssid, bssid)))
return 0;
- }
return rdev->ops->deauth(&rdev->wiphy, dev, &req);
}
OpenPOWER on IntegriCloud