diff options
| -rw-r--r-- | arch/arm/mach-omap2/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pm-domain.c | 300 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pm.c | 271 | ||||
| -rw-r--r-- | include/asm-arm/arch-omap/irqs.h | 2 | ||||
| -rw-r--r-- | include/asm-arm/arch-omap/pm.h | 33 |
5 files changed, 601 insertions, 7 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 7a8edd6cd198..266d88e77bdc 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -9,7 +9,7 @@ obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \ obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c new file mode 100644 index 000000000000..5e20e740cde5 --- /dev/null +++ b/arch/arm/mach-omap2/pm-domain.c @@ -0,0 +1,300 @@ +/* + * linux/arch/arm/mach-omap2/pm-domain.c + * + * Power domain functions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * + * Some code based on earlier OMAP2 sample PM code + * Copyright (C) 2005 Texas Instruments, Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> + +#include <asm/io.h> + +#include "prcm-regs.h" + +/* Power domain offsets */ +#define PM_MPU_OFFSET 0x100 +#define PM_CORE_OFFSET 0x200 +#define PM_GFX_OFFSET 0x300 +#define PM_WKUP_OFFSET 0x400 /* Autoidle only */ +#define PM_PLL_OFFSET 0x500 /* Autoidle only */ +#define PM_DSP_OFFSET 0x800 +#define PM_MDM_OFFSET 0xc00 + +/* Power domain wake-up dependency control register */ +#define PM_WKDEP_OFFSET 0xc8 +#define EN_MDM (1 << 5) +#define EN_WKUP (1 << 4) +#define EN_GFX (1 << 3) +#define EN_DSP (1 << 2) +#define EN_MPU (1 << 1) +#define EN_CORE (1 << 0) + +/* Core power domain state transition control register */ +#define PM_PWSTCTRL_OFFSET 0xe0 +#define FORCESTATE (1 << 18) /* Only for DSP & GFX */ +#define MEM4RETSTATE (1 << 6) +#define MEM3RETSTATE (1 << 5) +#define MEM2RETSTATE (1 << 4) +#define MEM1RETSTATE (1 << 3) +#define LOGICRETSTATE (1 << 2) /* Logic is retained */ +#define POWERSTATE_OFF 0x3 +#define POWERSTATE_RETENTION 0x1 +#define POWERSTATE_ON 0x0 + +/* Power domain state register */ +#define PM_PWSTST_OFFSET 0xe4 + +/* Hardware supervised state transition control register */ +#define CM_CLKSTCTRL_OFFSET 0x48 +#define AUTOSTAT_MPU (1 << 0) /* MPU */ +#define AUTOSTAT_DSS (1 << 2) /* Core */ +#define AUTOSTAT_L4 (1 << 1) /* Core */ +#define AUTOSTAT_L3 (1 << 0) /* Core */ +#define AUTOSTAT_GFX (1 << 0) /* GFX */ +#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */ +#define AUTOSTAT_DSP (1 << 0) /* DSP */ +#define AUTOSTAT_MDM (1 << 0) /* MDM */ + +/* Automatic control of interface clock idling */ +#define CM_AUTOIDLE1_OFFSET 0x30 +#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */ +#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */ +#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */ +#define AUTO_54M(x) (((x) & 0x3) << 6) +#define AUTO_96M(x) (((x) & 0x3) << 2) +#define AUTO_DPLL(x) (((x) & 0x3) << 0) +#define AUTO_STOPPED 0x3 +#define AUTO_BYPASS_FAST 0x2 /* DPLL only */ +#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */ +#define AUTO_DISABLED 0x0 + +/* Voltage control PRCM_VOLTCTRL bits */ +#define AUTO_EXTVOLT (1 << 15) +#define FORCE_EXTVOLT (1 << 14) +#define SETOFF_LEVEL(x) (((x) & 0x3) << 12) +#define MEMRETCTRL (1 << 8) +#define SETRET_LEVEL(x) (((x) & 0x3) << 6) +#define VOLT_LEVEL(x) (((x) & 0x3) << 0) + +#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE) +#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r)) +#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r)) + +static u32 pmdomain_get_wakeup_dependencies(int domain_offset) +{ + return prcm_readl(domain_offset + PM_WKDEP_OFFSET); +} + +static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset) +{ + prcm_writel(state, domain_offset + PM_WKDEP_OFFSET); +} + +static u32 pmdomain_get_powerstate(int domain_offset) +{ + return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET); +} + +static void pmdomain_set_powerstate(u32 state, int domain_offset) +{ + prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET); +} + +static u32 pmdomain_get_clock_autocontrol(int domain_offset) +{ + return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET); +} + +static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset) +{ + prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET); +} + +static u32 pmdomain_get_clock_autoidle1(int domain_offset) +{ + return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET); +} + +/* Core domain only */ +static u32 pmdomain_get_clock_autoidle2(int domain_offset) +{ + return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET); +} + +/* Core domain only */ +static u32 pmdomain_get_clock_autoidle3(int domain_offset) +{ + return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET); +} + +/* Core domain only */ +static u32 pmdomain_get_clock_autoidle4(int domain_offset) +{ + return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET); +} + +static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset) +{ + prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset); +} + +/* Core domain only */ +static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset) +{ + prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset); +} + +/* Core domain only */ +static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset) +{ + prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset); +} + +/* Core domain only */ +static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset) +{ + prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset); +} + +/* + * Configures power management domains to idle clocks automatically. + */ +void pmdomain_set_autoidle(void) +{ + u32 val; + + /* Set PLL auto stop for 54M, 96M & DPLL */ + pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) | + AUTO_96M(AUTO_STOPPED) | + AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET); + + /* External clock input control + * REVISIT: Should this be in clock framework? + */ + PRCM_CLKSRC_CTRL |= (0x3 << 3); + + /* Configure number of 32KHz clock cycles for sys_clk */ + PRCM_CLKSSETUP = 0x00ff; + + /* Configure automatic voltage transition */ + PRCM_VOLTSETUP = 0; + val = PRCM_VOLTCTRL; + val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3)); + val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT; + PRCM_VOLTCTRL = val; + + /* Disable emulation tools functional clock */ + PRCM_CLKEMUL_CTRL = 0x0; + + /* Set core memory retention state */ + val = pmdomain_get_powerstate(PM_CORE_OFFSET); + if (cpu_is_omap2420()) { + val &= ~(0x7 << 3); + val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE); + } else { + val &= ~(0xf << 3); + val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE | + MEM1RETSTATE); + } + pmdomain_set_powerstate(val, PM_CORE_OFFSET); + + /* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */ + val = SMS_SYSCONFIG; + val &= ~(0x3 << 3); + val |= (0x2 << 3) | (1 << 0); + SMS_SYSCONFIG |= val; + + val = SDRC_SYSCONFIG; + val &= ~(0x3 << 3); + val |= (0x2 << 3); + SDRC_SYSCONFIG = val; + + /* Configure L3 interface for smart idle. + * REVISIT: Enable autoidle bit0 ? + */ + val = GPMC_SYSCONFIG; + val &= ~(0x3 << 3); + val |= (0x2 << 3) | (1 << 0); + GPMC_SYSCONFIG = val; + + pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION, + PM_MPU_OFFSET); + pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET); + if (!cpu_is_omap2420()) + pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET); + + /* Assume suspend function has saved the state for DSP and GFX */ + pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET); + pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET); + +#if 0 + /* REVISIT: Internal USB needs special handling */ + force_standby_usb(); + if (cpu_is_omap2430()) + force_hsmmc(); + sdram_self_refresh_on_idle_req(1); +#endif + + /* Enable clock auto control for all domains. + * Note that CORE domain includes also DSS, L4 & L3. + */ + pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET); + pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET); + pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3, + PM_CORE_OFFSET); + if (cpu_is_omap2420()) + pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP, + PM_DSP_OFFSET); + else { + pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET); + pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET); + } + + /* Enable clock autoidle for all domains */ + pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET); + if (cpu_is_omap2420()) { + pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET); + } else { + pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET); + pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET); + } + pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET); +} + +/* + * Initializes power domains by removing wake-up dependencies and powering + * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code + * must re-enable DSP and GFX when used. + */ +void __init pmdomain_init(void) +{ + /* Remove all domain wakeup dependencies */ + pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET); + pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET); + pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET); + pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET); + if (cpu_is_omap2430()) + pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET); + + /* Power down DSP and GFX */ + pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET); + pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET); +} diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 562168fa2b16..d7eee99b7e3f 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/sysfs.h> #include <linux/module.h> +#include <linux/delay.h> #include <asm/io.h> #include <asm/irq.h> @@ -36,11 +37,18 @@ #include <asm/arch/sram.h> #include <asm/arch/pm.h> +#include "prcm-regs.h" + static struct clk *vclk; static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev); static void (*saved_idle)(void); +extern void __init pmdomain_init(void); +extern void pmdomain_set_autoidle(void); + +static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE]; + void omap2_pm_idle(void) { local_irq_disable(); @@ -87,23 +95,272 @@ static int omap2_pm_prepare(suspend_state_t state) return error; } +#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \ + OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \ + OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3)) + +#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4)) + +#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \ + OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \ + OMAP_IRQ_BIT(INT_24XX_UART3_IRQ)) + +#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, ®, reg); + +static void omap2_pm_debug(char * desc) +{ + printk("%s:\n", desc); + + preg(CM_CLKSTCTRL_MPU); + preg(CM_CLKSTCTRL_CORE); + preg(CM_CLKSTCTRL_GFX); + preg(CM_CLKSTCTRL_DSP); + preg(CM_CLKSTCTRL_MDM); + + preg(PM_PWSTCTRL_MPU); + preg(PM_PWSTCTRL_CORE); + preg(PM_PWSTCTRL_GFX); + preg(PM_PWSTCTRL_DSP); + preg(PM_PWSTCTRL_MDM); + + preg(PM_PWSTST_MPU); + preg(PM_PWSTST_CORE); + preg(PM_PWSTST_GFX); + preg(PM_PWSTST_DSP); + preg(PM_PWSTST_MDM); + + preg(CM_AUTOIDLE1_CORE); + preg(CM_AUTOIDLE2_CORE); + preg(CM_AUTOIDLE3_CORE); + preg(CM_AUTOIDLE4_CORE); + preg(CM_AUTOIDLE_WKUP); + preg(CM_AUTOIDLE_PLL); + preg(CM_AUTOIDLE_DSP); + preg(CM_AUTOIDLE_MDM); + + preg(CM_ICLKEN1_CORE); + preg(CM_ICLKEN2_CORE); + preg(CM_ICLKEN3_CORE); + preg(CM_ICLKEN4_CORE); + preg(CM_ICLKEN_GFX); + preg(CM_ICLKEN_WKUP); + preg(CM_ICLKEN_DSP); + preg(CM_ICLKEN_MDM); + + preg(CM_IDLEST1_CORE); + preg(CM_IDLEST2_CORE); + preg(CM_IDLEST3_CORE); + preg(CM_IDLEST4_CORE); + preg(CM_IDLEST_GFX); + preg(CM_IDLEST_WKUP); + preg(CM_IDLEST_CKGEN); + preg(CM_IDLEST_DSP); + preg(CM_IDLEST_MDM); + + preg(RM_RSTST_MPU); + preg(RM_RSTST_GFX); + preg(RM_RSTST_WKUP); + preg(RM_RSTST_DSP); + preg(RM_RSTST_MDM); + + preg(PM_WKDEP_MPU); + preg(PM_WKDEP_CORE); + preg(PM_WKDEP_GFX); + preg(PM_WKDEP_DSP); + preg(PM_WKDEP_MDM); + + preg(CM_FCLKEN_WKUP); + preg(CM_ICLKEN_WKUP); + preg(CM_IDLEST_WKUP); + preg(CM_AUTOIDLE_WKUP); + preg(CM_CLKSEL_WKUP); + + preg(PM_WKEN_WKUP); + preg(PM_WKST_WKUP); +} + +static inline void omap2_pm_save_registers(void) +{ + /* Save interrupt registers */ + OMAP24XX_SAVE(INTC_MIR0); + OMAP24XX_SAVE(INTC_MIR1); + OMAP24XX_SAVE(INTC_MIR2); + + /* Save power control registers */ + OMAP24XX_SAVE(CM_CLKSTCTRL_MPU); + OMAP24XX_SAVE(CM_CLKSTCTRL_CORE); + OMAP24XX_SAVE(CM_CLKSTCTRL_GFX); + OMAP24XX_SAVE(CM_CLKSTCTRL_DSP); + OMAP24XX_SAVE(CM_CLKSTCTRL_MDM); + + /* Save power state registers */ + OMAP24XX_SAVE(PM_PWSTCTRL_MPU); + OMAP24XX_SAVE(PM_PWSTCTRL_CORE); + OMAP24XX_SAVE(PM_PWSTCTRL_GFX); + OMAP24XX_SAVE(PM_PWSTCTRL_DSP); + OMAP24XX_SAVE(PM_PWSTCTRL_MDM); + + /* Save autoidle registers */ + OMAP24XX_SAVE(CM_AUTOIDLE1_CORE); + OMAP24XX_SAVE(CM_AUTOIDLE2_CORE); + OMAP24XX_SAVE(CM_AUTOIDLE3_CORE); + OMAP24XX_SAVE(CM_AUTOIDLE4_CORE); + OMAP24XX_SAVE(CM_AUTOIDLE_WKUP); + OMAP24XX_SAVE(CM_AUTOIDLE_PLL); + OMAP24XX_SAVE(CM_AUTOIDLE_DSP); + OMAP24XX_SAVE(CM_AUTOIDLE_MDM); + + /* Save idle state registers */ + OMAP24XX_SAVE(CM_IDLEST1_CORE); + OMAP24XX_SAVE(CM_IDLEST2_CORE); + OMAP24XX_SAVE(CM_IDLEST3_CORE); + OMAP24XX_SAVE(CM_IDLEST4_CORE); + OMAP24XX_SAVE(CM_IDLEST_GFX); + OMAP24XX_SAVE(CM_IDLEST_WKUP); + OMAP24XX_SAVE(CM_IDLEST_CKGEN); + OMAP24XX_SAVE(CM_IDLEST_DSP); + OMAP24XX_SAVE(CM_IDLEST_MDM); + + /* Save clock registers */ + OMAP24XX_SAVE(CM_FCLKEN1_CORE); + OMAP24XX_SAVE(CM_FCLKEN2_CORE); + OMAP24XX_SAVE(CM_ICLKEN1_CORE); + OMAP24XX_SAVE(CM_ICLKEN2_CORE); + OMAP24XX_SAVE(CM_ICLKEN3_CORE); + OMAP24XX_SAVE(CM_ICLKEN4_CORE); +} + +static inline void omap2_pm_restore_registers(void) +{ + /* Restore clock state registers */ + OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU); + OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE); + OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX); + OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP); + OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM); + + /* Restore power state registers */ + OMAP24XX_RESTORE(PM_PWSTCTRL_MPU); + OMAP24XX_RESTORE(PM_PWSTCTRL_CORE); + OMAP24XX_RESTORE(PM_PWSTCTRL_GFX); + OMAP24XX_RESTORE(PM_PWSTCTRL_DSP); + OMAP24XX_RESTORE(PM_PWSTCTRL_MDM); + + /* Restore idle state registers */ + OMAP24XX_RESTORE(CM_IDLEST1_CORE); + OMAP24XX_RESTORE(CM_IDLEST2_CORE); + OMAP24XX_RESTORE(CM_IDLEST3_CORE); + OMAP24XX_RESTORE(CM_IDLEST4_CORE); + OMAP24XX_RESTORE(CM_IDLEST_GFX); + OMAP24XX_RESTORE(CM_IDLEST_WKUP); + OMAP24XX_RESTORE(CM_IDLEST_CKGEN); + OMAP24XX_RESTORE(CM_IDLEST_DSP); + OMAP24XX_RESTORE(CM_IDLEST_MDM); + + /* Restore autoidle registers */ + OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE); + OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE); + OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE); + OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE); + OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP); + OMAP24XX_RESTORE(CM_AUTOIDLE_PLL); + OMAP24XX_RESTORE(CM_AUTOIDLE_DSP); + OMAP24XX_RESTORE(CM_AUTOIDLE_MDM); + + /* Restore clock registers */ + OMAP24XX_RESTORE(CM_FCLKEN1_CORE); + OMAP24XX_RESTORE(CM_FCLKEN2_CORE); + OMAP24XX_RESTORE(CM_ICLKEN1_CORE); + OMAP24XX_RESTORE(CM_ICLKEN2_CORE); + OMAP24XX_RESTORE(CM_ICLKEN3_CORE); + OMAP24XX_RESTORE(CM_ICLKEN4_CORE); + + /* REVISIT: Clear interrupts here */ + + /* Restore interrupt registers */ + OMAP24XX_RESTORE(INTC_MIR0); + OMAP24XX_RESTORE(INTC_MIR1); + OMAP24XX_RESTORE(INTC_MIR2); +} + +static int omap2_pm_suspend(void) +{ + int processor_type = 0; + + /* REVISIT: 0x21 or 0x26? */ + if (cpu_is_omap2420()) + processor_type = 0x21; + + if (!processor_type) + return -ENOTSUPP; + + local_irq_disable(); + local_fiq_disable(); + + omap2_pm_save_registers(); + + /* Disable interrupts except for the wake events */ + INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK; + INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK; + INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK; + + pmdomain_set_autoidle(); + + /* Clear old wake-up events */ + PM_WKST1_CORE = 0; + PM_WKST2_CORE = 0; + PM_WKST_WKUP = 0; + + /* Enable wake-up events */ + PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */ + PM_WKEN2_CORE = (1 << 2); /* UART3 */ + PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */ + + /* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled + * in the SRAM suspend code */ + CM_FCLKEN1_CORE = 0; + CM_FCLKEN2_CORE = 0; + CM_ICLKEN1_CORE = 0; + CM_ICLKEN3_CORE = 0; + CM_ICLKEN4_CORE = 0; + + omap2_pm_debug("Status before suspend"); + + /* Must wait for serial buffers to clear */ + mdelay(200); + + /* Jump to SRAM suspend code + * REVISIT: When is this SDRC_DLLB_CTRL? + */ + omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type); + + /* Back from sleep */ + omap2_pm_restore_registers(); + + local_fiq_enable(); + local_irq_enable(); + + return 0; +} + static int omap2_pm_enter(suspend_state_t state) { + int ret = 0; + switch (state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: - /* FIXME: Add suspend */ + ret = omap2_pm_suspend(); break; - case PM_SUSPEND_DISK: - return -ENOTSUPP; - + ret = -ENOTSUPP; + break; default: - return -EINVAL; + ret = -EINVAL; } - return 0; + return ret; } static int omap2_pm_finish(suspend_state_t state) @@ -143,6 +400,8 @@ int __init omap2_pm_init(void) pm_set_ops(&omap_pm_ops); pm_idle = omap2_pm_idle; + pmdomain_init(); + return 0; } diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 46f2f06eae0c..2542495d8a43 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -258,6 +258,8 @@ #define INT_24XX_MCBSP1_IRQ_RX 60 #define INT_24XX_MCBSP2_IRQ_TX 62 #define INT_24XX_MCBSP2_IRQ_RX 63 +#define INT_24XX_UART1_IRQ 72 +#define INT_24XX_UART2_IRQ 73 #define INT_24XX_UART3_IRQ 74 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h index 05b003f3a94c..e46623c61a72 100644 --- a/include/asm-arm/arch-omap/pm.h +++ b/include/asm-arm/arch-omap/pm.h @@ -299,10 +299,43 @@ enum omap24xx_save_state { OMAP24XX_SLEEP_SAVE_INTC_MIR0, OMAP24XX_SLEEP_SAVE_INTC_MIR1, OMAP24XX_SLEEP_SAVE_INTC_MIR2, + + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU, + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE, + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX, + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP, + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM, + + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU, + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE, + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX, + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP, + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM, + + OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE, + OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE, + OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE, + OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM, + + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM, + OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE, OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE, OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE, OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE, + OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE, OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE, OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1, OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1, |
