summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-omap2/Makefile6
-rw-r--r--arch/arm/mach-omap2/clock.h30
-rw-r--r--arch/arm/mach-omap2/clock2xxx.c (renamed from arch/arm/mach-omap2/clock24xx.c)331
-rw-r--r--arch/arm/mach-omap2/clock2xxx.h41
-rw-r--r--arch/arm/mach-omap2/clock2xxx_data.c (renamed from arch/arm/mach-omap2/clock24xx.h)832
-rw-r--r--arch/arm/mach-omap2/opp2420_data.c126
-rw-r--r--arch/arm/mach-omap2/opp2430_data.c133
-rw-r--r--arch/arm/mach-omap2/opp2xxx.h424
-rw-r--r--arch/arm/mach-omap2/sdrc.h3
-rw-r--r--arch/arm/plat-omap/include/plat/clock.h2
10 files changed, 1044 insertions, 884 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index cc56accee3ef..610da0515e1f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -7,7 +7,7 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
omap-2-3-common = irq.o sdrc.o omap_hwmod.o
prcm-common = prcm.o powerdomain.o
-clock-common = clock.o clockdomain.o
+clock-common = clock.o clock_common_data.o clockdomain.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
@@ -41,8 +41,10 @@ obj-$(CONFIG_ARCH_OMAP3) += cm.o
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o
+obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o
# EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b1991e39961a..87c08056b303 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1,8 +1,8 @@
/*
* linux/arch/arm/mach-omap2/clock.h
*
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2008 Nokia Corporation
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
*
* Contacts:
* Richard Woodruff <r-woodruff2@ti.com>
@@ -72,31 +72,17 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
u8 *idlest_bit);
+extern u8 cpu_mask;
+
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
-extern u8 cpu_mask;
-
extern struct clk_functions omap2_clk_functions;
+extern struct clk *vclk, *sclk;
-/* clksel_rate data common to 24xx/343x */
-static const struct clksel_rate gpt_32k_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate gpt_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate gfx_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
- { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
- { .div = 0 }
-};
+extern const struct clksel_rate gpt_32k_rates[];
+extern const struct clksel_rate gpt_sys_rates[];
+extern const struct clksel_rate gfx_l3_rates[];
#endif
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock2xxx.c
index a4221741808e..d0e3fb7f9298 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -37,183 +37,13 @@
#include <plat/sdrc.h>
#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
-static const struct clkops clkops_oscck;
-static const struct clkops clkops_apll96;
-static const struct clkops clkops_apll54;
-
-static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit);
-
-/* 2430 I2CHS has non-standard IDLEST register */
-static const struct clkops clkops_omap2430_i2chs_wait = {
- .enable = omap2_dflt_clk_enable,
- .disable = omap2_dflt_clk_disable,
- .find_idlest = omap2430_clk_i2chs_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-#include "clock24xx.h"
-
-static struct omap_clk omap24xx_clks[] = {
- /* external root sources */
- CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
- CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
- CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
- CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
- CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
- /* internal analog sources */
- CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X),
- CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X),
- CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X),
- /* internal prcm root sources */
- CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X),
- CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X),
- CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X),
- CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X),
- CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X),
- CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X),
- CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
- CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X),
- CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
- CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X),
- CLK(NULL, "emul_ck", &emul_ck, CK_242X),
- /* mpu domain clocks */
- CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X),
- /* dsp domain clocks */
- CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X),
- CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
- CLK(NULL, "dsp_ick", &dsp_ick, CK_242X),
- CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X),
- CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X),
- CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
- /* GFX domain clocks */
- CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X),
- CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X),
- CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X),
- /* Modem domain clocks */
- CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
- CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
- /* DSS domain clocks */
- CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X),
- CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
- CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
- CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
- /* L3 domain clocks */
- CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
- CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
- CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X),
- /* L4 domain clocks */
- CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X),
- CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X),
- /* virtual meta-group clock */
- CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
- /* general l4 interface ck, multi-parent functional clk */
- CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X),
- CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X),
- CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X),
- CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X),
- CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X),
- CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
- CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X),
- CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
- CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X),
- CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
- CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X),
- CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X),
- CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X),
- CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X),
- CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X),
- CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
- CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X),
- CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X),
- CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X),
- CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X),
- CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X),
- CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X),
- CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X),
- CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X),
- CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X),
- CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X),
- CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X),
- CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X),
- CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X),
- CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X),
- CLK(NULL, "icr_ick", &icr_ick, CK_243X),
- CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X),
- CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X),
- CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X),
- CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X),
- CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X),
- CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X),
- CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X),
- CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X),
- CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X),
- CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
- CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
- CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X),
- CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X),
- CLK(NULL, "eac_ick", &eac_ick, CK_242X),
- CLK(NULL, "eac_fck", &eac_fck, CK_242X),
- CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X),
- CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X),
- CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X),
- CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X),
- CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X),
- CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X),
- CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X),
- CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X),
- CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X),
- CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X),
- CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X),
- CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X),
- CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
- CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X),
- CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X),
- CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X),
- CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X),
- CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
- CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
- CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
- CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
- CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
- CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
- CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
- CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X),
- CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
- CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
- CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
- CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
- CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
-};
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
#define EN_APLL_STOPPED 0
@@ -226,11 +56,12 @@ static struct omap_clk omap24xx_clks[] = {
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
-static struct prcm_config *curr_prcm_set;
-static struct clk *vclk;
-static struct clk *sclk;
+const struct prcm_config *curr_prcm_set;
+const struct prcm_config *rate_table;
+
+struct clk *vclk, *sclk, *dclk;
-static void __iomem *prcm_clksrc_ctrl;
+void __iomem *prcm_clksrc_ctrl;
/*-------------------------------------------------------------------------
* Omap24xx specific clock functions
@@ -255,6 +86,13 @@ static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
*idlest_bit = clk->enable_bit;
}
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clkops clkops_omap2430_i2chs_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
/**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
@@ -266,7 +104,7 @@ static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
* struct clk *dpll_ck, which is a composite clock of dpll_ck and
* core_ck.
*/
-static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
+unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
{
long long core_clk;
u32 v;
@@ -304,14 +142,14 @@ static void omap2_disable_osc_ck(struct clk *clk)
__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
}
-static const struct clkops clkops_oscck = {
- .enable = &omap2_enable_osc_ck,
- .disable = &omap2_disable_osc_ck,
+const struct clkops clkops_oscck = {
+ .enable = omap2_enable_osc_ck,
+ .disable = omap2_disable_osc_ck,
};
#ifdef OLD_CK
/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk * clk)
+static void omap2_sys_clk_recalc(struct clk *clk)
{
u32 div = PRCM_CLKSRC_CTRL;
div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */
@@ -367,21 +205,21 @@ static void omap2_clk_apll_disable(struct clk *clk)
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
}
-static const struct clkops clkops_apll96 = {
- .enable = &omap2_clk_apll96_enable,
- .disable = &omap2_clk_apll_disable,
+const struct clkops clkops_apll96 = {
+ .enable = omap2_clk_apll96_enable,
+ .disable = omap2_clk_apll_disable,
};
-static const struct clkops clkops_apll54 = {
- .enable = &omap2_clk_apll54_enable,
- .disable = &omap2_clk_apll_disable,
+const struct clkops clkops_apll54 = {
+ .enable = omap2_clk_apll54_enable,
+ .disable = omap2_clk_apll_disable,
};
/*
* Uses the current prcm set to tell if a rate is valid.
* You can go slower, but not faster within a given rate set.
*/
-static long omap2_dpllcore_round_rate(unsigned long target_rate)
+long omap2_dpllcore_round_rate(unsigned long target_rate)
{
u32 high, low, core_clk_src;
@@ -410,19 +248,19 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
}
-static unsigned long omap2_dpllcore_recalc(struct clk *clk)
+unsigned long omap2_dpllcore_recalc(struct clk *clk)
{
return omap2xxx_clk_get_core_rate(clk);
}
-static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
+int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
{
u32 cur_rate, low, mult, div, valid_rate, done_rate;
u32 bypass = 0;
struct prcm_config tmpset;
const struct dpll_data *dd;
- cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(dclk);
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
@@ -489,7 +327,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
*
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
*/
-static unsigned long omap2_table_mpu_recalc(struct clk *clk)
+unsigned long omap2_table_mpu_recalc(struct clk *clk)
{
return curr_prcm_set->mpu_speed;
}
@@ -501,17 +339,20 @@ static unsigned long omap2_table_mpu_recalc(struct clk *clk)
* Some might argue L3-DDR, others ARM, others IVA. This code is simple and
* just uses the ARM rates.
*/
-static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
{
- struct prcm_config *ptr;
+ const struct prcm_config *ptr;
long highest_rate;
+ long sys_ck_rate;
+
+ sys_ck_rate = clk_get_rate(sclk);
highest_rate = -EINVAL;
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (!(ptr->flags & cpu_mask))
continue;
- if (ptr->xtal_speed != sys_ck.rate)
+ if (ptr->xtal_speed != sys_ck_rate)
continue;
highest_rate = ptr->mpu_speed;
@@ -524,18 +365,21 @@ static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
}
/* Sets basic clocks based on the specified rate */
-static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+int omap2_select_table_rate(struct clk *clk, unsigned long rate)
{
u32 cur_rate, done_rate, bypass = 0, tmp;
- struct prcm_config *prcm;
+ const struct prcm_config *prcm;
unsigned long found_speed = 0;
unsigned long flags;
+ long sys_ck_rate;
+
+ sys_ck_rate = clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_ck.rate)
+ if (prcm->xtal_speed != sys_ck_rate)
continue;
if (prcm->mpu_speed <= rate) {
@@ -551,7 +395,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
}
curr_prcm_set = prcm;
- cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(dclk);
if (prcm->dpll_speed == cur_rate / 2) {
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
@@ -682,12 +526,12 @@ static u32 omap2_get_sysclkdiv(void)
return div;
}
-static unsigned long omap2_osc_clk_recalc(struct clk *clk)
+unsigned long omap2_osc_clk_recalc(struct clk *clk)
{
return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
}
-static unsigned long omap2_sys_clk_recalc(struct clk *clk)
+unsigned long omap2_sys_clk_recalc(struct clk *clk)
{
return clk->parent->rate / omap2_get_sysclkdiv();
}
@@ -712,85 +556,32 @@ void omap2_clk_prepare_for_reboot(void)
*/
static int __init omap2_clk_arch_init(void)
{
+ struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck;
+ unsigned long sys_ck_rate;
+
if (!mpurate)
return -EINVAL;
- if (clk_set_rate(&virt_prcm_set, mpurate))
+ virt_prcm_set = clk_get(NULL, "virt_prcm_set");
+ sys_ck = clk_get(NULL, "sys_ck");
+ dpll_ck = clk_get(NULL, "dpll_ck");
+ mpu_ck = clk_get(NULL, "mpu_ck");
+
+ if (clk_set_rate(virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
recalculate_root_clocks();
- printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
- (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+ sys_ck_rate = clk_get_rate(sys_ck);
+
+ pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): "
+ "%ld.%01ld/%ld/%ld MHz\n",
+ (sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10,
+ (clk_get_rate(dpll_ck) / 1000000),
+ (clk_get_rate(mpu_ck) / 1000000));
return 0;
}
arch_initcall(omap2_clk_arch_init);
-int __init omap2_clk_init(void)
-{
- struct prcm_config *prcm;
- struct omap_clk *c;
- u32 clkrate;
- u16 cpu_clkflg;
-
- if (cpu_is_omap242x()) {
- prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
- cpu_mask = RATE_IN_242X;
- cpu_clkflg = CK_242X;
- } else if (cpu_is_omap2430()) {
- prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
- cpu_mask = RATE_IN_243X;
- cpu_clkflg = CK_243X;
- }
-
- clk_init(&omap2_clk_functions);
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_preinit(c->lk.clk);
-
- osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
- propagate_rate(&osc_ck);
- sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
- propagate_rate(&sys_ck);
-
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
- clk_register(c->lk.clk);
- omap2_init_clk_clkdm(c->lk.clk);
- }
-
- /* Check the MPU rate set by bootloader */
- clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
- }
- curr_prcm_set = prcm;
-
- recalculate_root_clocks();
-
- printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
- (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
- /*
- * Only enable those clocks we will need, let the drivers
- * enable other clocks as necessary
- */
- clk_enable_init_clocks();
-
- /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
- vclk = clk_get(NULL, "virt_prcm_set");
- sclk = clk_get(NULL, "sys_ck");
-
- return 0;
-}
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
new file mode 100644
index 000000000000..e35efde4bd80
--- /dev/null
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -0,0 +1,41 @@
+/*
+ * OMAP2 clock function prototypes and macros
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
+
+unsigned long omap2_table_mpu_recalc(struct clk *clk);
+int omap2_select_table_rate(struct clk *clk, unsigned long rate);
+long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
+unsigned long omap2_sys_clk_recalc(struct clk *clk);
+unsigned long omap2_osc_clk_recalc(struct clk *clk);
+unsigned long omap2_sys_clk_recalc(struct clk *clk);
+unsigned long omap2_dpllcore_recalc(struct clk *clk);
+int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
+unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
+
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
+extern void __iomem *prcm_clksrc_ctrl;
+
+extern struct clk *dclk;
+
+extern const struct clkops clkops_omap2430_i2chs_wait;
+extern const struct clkops clkops_oscck;
+extern const struct clkops clkops_apll96;
+extern const struct clkops clkops_apll54;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock2xxx_data.c
index 21238d18fc80..97dc7cf7751d 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock2xxx_data.c
@@ -1,8 +1,8 @@
/*
- * linux/arch/arm/mach-omap2/clock24xx.h
+ * linux/arch/arm/mach-omap2/clock2xxx_data.c
*
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2008 Nokia Corporation
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
*
* Contacts:
* Richard Woodruff <r-woodruff2@ti.com>
@@ -13,600 +13,21 @@
* published by the Free Software Foundation.
*/
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
-#include "clock.h"
+#include <plat/clkdev_omap.h>
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
#include "prm.h"
#include "cm.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
-/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
-#ifdef CONFIG_ARCH_OMAP2420
-#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
-#else
-#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
-#endif
-
-static unsigned long omap2_table_mpu_recalc(struct clk *clk);
-static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
-static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-static unsigned long omap2_sys_clk_recalc(struct clk *clk);
-static unsigned long omap2_osc_clk_recalc(struct clk *clk);
-static unsigned long omap2_sys_clk_recalc(struct clk *clk);
-static unsigned long omap2_dpllcore_recalc(struct clk *clk);
-static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
-
-/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- */
-struct prcm_config {
- unsigned long xtal_speed; /* crystal rate */
- unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
- unsigned long mpu_speed; /* speed of MPU */
- unsigned long cm_clksel_mpu; /* mpu divider */
- unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
- unsigned long cm_clksel_gfx; /* gfx dividers */
- unsigned long cm_clksel1_core; /* major subsystem dividers */
- unsigned long cm_clksel1_pll; /* m,n */
- unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
- unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
- unsigned long base_sdrc_rfr; /* base refresh timing for a set */
- unsigned char flags;
-};
-
-/*
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- */
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1 (0x10 << 8)
-#define RX_CLKSEL_DSS2 (0x0 << 13)
-#define RX_CLKSEL_SSI (0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3 (4 << 0)
-#define R1_CLKSEL_L4 (2 << 5)
-#define R1_CLKSEL_USB (4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- R1_CLKSEL_L4 | R1_CLKSEL_L3
-#define R1_CLKSEL_MPU (2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP (2 << 0)
-#define R1_CLKSEL_DSP_IF (2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
-#define R1_CLKSEL_GFX (2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM (4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3 (6 << 0)
-#define R2_CLKSEL_L4 (2 << 5)
-#define R2_CLKSEL_USB (2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- R2_CLKSEL_L4 | R2_CLKSEL_L3
-#define R2_CLKSEL_MPU (2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP (2 << 0)
-#define R2_CLKSEL_DSP_IF (3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
-#define R2_CLKSEL_GFX (2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM (6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3 (1 << 0)
-#define RB_CLKSEL_L4 (1 << 5)
-#define RB_CLKSEL_USB (1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- RB_CLKSEL_L4 | RB_CLKSEL_L3
-#define RB_CLKSEL_MPU (1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP (1 << 0)
-#define RB_CLKSEL_DSP_IF (1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
-#define RB_CLKSEL_GFX (1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM (1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ (0x12 << 15)
-#define RXX_CLKSEL_SSI (0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
-#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
-#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
- RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
- RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
- RIII_CLKSEL_L3
-#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
-#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
-#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
- RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
- RIII_CLKSEL_DSP
-#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
-#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
-#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \
- RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- RII_CLKSEL_L4 | RII_CLKSEL_L3
-#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
-#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
-#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
-#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \
- RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
- RII_CLKSEL_DSP
-#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
-
-/* 2420-PRCM I 660MHz core */
-#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
-#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
-#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
-#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \
- RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- RI_CLKSEL_L4 | RI_CLKSEL_L3
-#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
-#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
-#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
-#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
-#define RI_SYNC_DSP (1 << 7) /* Activate sync */
-#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
-#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
-#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \
- RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
- RI_CLKSEL_DSP
-#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
-#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3 (1 << 0)
-#define RVII_CLKSEL_L4 (1 << 5)
-#define RVII_CLKSEL_DSS1 (1 << 8)
-#define RVII_CLKSEL_DSS2 (0 << 13)
-#define RVII_CLKSEL_VLYNQ (1 << 15)
-#define RVII_CLKSEL_SSI (1 << 20)
-#define RVII_CLKSEL_USB (1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
- RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
- RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
-
-#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
-
-#define RVII_CLKSEL_DSP (1 << 0)
-#define RVII_CLKSEL_DSP_IF (1 << 5)
-#define RVII_SYNC_DSP (0 << 7)
-#define RVII_CLKSEL_IVA (1 << 8)
-#define RVII_SYNC_IVA (0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
- RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
-
-#define RVII_CLKSEL_GFX (1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC (0 << 3)
-#define MX_54M_SRC (0 << 5)
-#define MX_APLLS_CLIKIN_12 (3 << 23)
-#define MX_APLLS_CLIKIN_13 (2 << 23)
-#define MX_APLLS_CLIKIN_19_2 (0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12 (133 << 12)
-#define M5A_DPLL_DIV_12 (5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define M5A_DPLL_MULT_13 (61 << 12)
-#define M5A_DPLL_DIV_13 (2 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-#define M5A_DPLL_MULT_19 (55 << 12)
-#define M5A_DPLL_DIV_19 (3 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12 (50 << 12)
-#define M5B_DPLL_DIV_12 (2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define M5B_DPLL_MULT_13 (200 << 12)
-#define M5B_DPLL_DIV_13 (12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-#define M5B_DPLL_MULT_19 (125 << 12)
-#define M5B_DPLL_DIV_19 (31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-/*
- * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
- */
-#define M4_DPLL_MULT_12 (133 << 12)
-#define M4_DPLL_DIV_12 (3 << 8)
-#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-
-#define M4_DPLL_MULT_13 (399 << 12)
-#define M4_DPLL_DIV_13 (12 << 8)
-#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-
-#define M4_DPLL_MULT_19 (145 << 12)
-#define M4_DPLL_DIV_19 (6 << 8)
-#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-
-/*
- * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12 (55 << 12)
-#define M3_DPLL_DIV_12 (1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define M3_DPLL_MULT_13 (76 << 12)
-#define M3_DPLL_DIV_13 (2 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-#define M3_DPLL_MULT_19 (17 << 12)
-#define M3_DPLL_DIV_19 (0 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-
-/*
- * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
- */
-#define M2_DPLL_MULT_12 (55 << 12)
-#define M2_DPLL_DIV_12 (1 << 8)
-#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-
-/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
- * relock time issue */
-/* Core frequency changed from 330/165 to 329/164 MHz*/
-#define M2_DPLL_MULT_13 (76 << 12)
-#define M2_DPLL_DIV_13 (2 << 8)
-#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-
-#define M2_DPLL_MULT_19 (17 << 12)
-#define M2_DPLL_DIV_19 (0 << 8)
-#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-
-/* boot (boot) */
-#define MB_DPLL_MULT (1 << 12)
-#define MB_DPLL_DIV (0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
- MB_DPLL_MULT | MX_APLLS_CLIKIN_12
-
-#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
- MB_DPLL_MULT | MX_APLLS_CLIKIN_13
-
-#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
- MB_DPLL_MULT | MX_APLLS_CLIKIN_19
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/* PRCM I target DPLL = 2*330MHz = 660MHz */
-#define MI_DPLL_MULT_12 (55 << 12)
-#define MI_DPLL_DIV_12 (1 << 8)
-#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12 (50 << 12)
-#define MII_DPLL_DIV_12 (1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define MII_DPLL_MULT_13 (300 << 12)
-#define MII_DPLL_DIV_13 (12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12 (133 << 12)
-#define MIII_DPLL_DIV_12 (5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define MIII_DPLL_MULT_13 (266 << 12)
-#define MIII_DPLL_DIV_13 (12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
-
-/* MPU speed defines */
-#define S12M 12000000
-#define S13M 13000000
-#define S19M 19200000
-#define S26M 26000000
-#define S100M 100000000
-#define S133M 133000000
-#define S150M 150000000
-#define S164M 164000000
-#define S165M 165000000
-#define S199M 199000000
-#define S200M 200000000
-#define S266M 266000000
-#define S300M 300000000
-#define S329M 329000000
-#define S330M 330000000
-#define S399M 399000000
-#define S400M 400000000
-#define S532M 532000000
-#define S600M 600000000
-#define S658M 658000000
-#define S660M 660000000
-#define S798M 798000000
-
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
-static struct prcm_config rate_table[] = {
- /* PRCM I - FAST */
- {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
- RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
- RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
- RATE_IN_242X},
-
- /* PRCM II - FAST */
- {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- /* PRCM III - FAST */
- {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- /* PRCM II - SLOW */
- {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- /* PRCM III - SLOW */
- {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- /* PRCM-VII (boot-bypass) */
- {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
- RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
- RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
- RATE_IN_242X},
-
- /* PRCM-VII (boot-bypass) */
- {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
- RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
- RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
- RATE_IN_242X},
-
- /* PRCM #4 - ratio2 (ES2.1) - FAST */
- {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
- R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
- R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #2 - ratio1 (ES2) - FAST */
- {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_165MHz,
- RATE_IN_243X},
-
- /* PRCM #5a - ratio1 - FAST */
- {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #5b - ratio1 - FAST */
- {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_100MHz,
- RATE_IN_243X},
-
- /* PRCM #4 - ratio1 (ES2.1) - SLOW */
- {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
- R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
- R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #2 - ratio1 (ES2) - SLOW */
- {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_165MHz,
- RATE_IN_243X},
-
- /* PRCM #5a - ratio1 - SLOW */
- {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #5b - ratio1 - SLOW*/
- {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_100MHz,
- RATE_IN_243X},
-
- /* PRCM-boot/bypass */
- {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
- RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
- RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_BYPASS,
- RATE_IN_243X},
-
- /* PRCM-boot/bypass */
- {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
- RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
- RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_BYPASS,
- RATE_IN_243X},
-
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
-
/*-------------------------------------------------------------------------
* 24xx clock tree.
*
@@ -2653,5 +2074,236 @@ static struct clk virt_prcm_set = {
.round_rate = &omap2_round_to_table_rate,
};
-#endif
+
+/*
+ * clkdev integration
+ */
+
+static struct omap_clk omap24xx_clks[] = {
+ /* external root sources */
+ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
+ CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
+ CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
+ CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
+ /* internal analog sources */
+ CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X),
+ CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X),
+ CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X),
+ /* internal prcm root sources */
+ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X),
+ CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X),
+ CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X),
+ CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
+ CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X),
+ CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
+ CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X),
+ CLK(NULL, "emul_ck", &emul_ck, CK_242X),
+ /* mpu domain clocks */
+ CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X),
+ /* dsp domain clocks */
+ CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X),
+ CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
+ CLK(NULL, "dsp_ick", &dsp_ick, CK_242X),
+ CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X),
+ CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X),
+ CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+ /* GFX domain clocks */
+ CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X),
+ CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X),
+ CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X),
+ /* Modem domain clocks */
+ CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
+ CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
+ /* DSS domain clocks */
+ CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X),
+ CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
+ CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
+ CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
+ /* L3 domain clocks */
+ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
+ CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X),
+ /* L4 domain clocks */
+ CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X),
+ /* virtual meta-group clock */
+ CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
+ /* general l4 interface ck, multi-parent functional clk */
+ CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X),
+ CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X),
+ CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X),
+ CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
+ CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X),
+ CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
+ CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X),
+ CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
+ CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X),
+ CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X),
+ CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X),
+ CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
+ CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X),
+ CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X),
+ CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X),
+ CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X),
+ CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X),
+ CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X),
+ CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X),
+ CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X),
+ CLK(NULL, "icr_ick", &icr_ick, CK_243X),
+ CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X),
+ CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X),
+ CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X),
+ CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X),
+ CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X),
+ CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X),
+ CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X),
+ CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X),
+ CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
+ CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
+ CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X),
+ CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X),
+ CLK(NULL, "eac_ick", &eac_ick, CK_242X),
+ CLK(NULL, "eac_fck", &eac_fck, CK_242X),
+ CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X),
+ CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X),
+ CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X),
+ CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X),
+ CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X),
+ CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X),
+ CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X),
+ CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X),
+ CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X),
+ CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X),
+ CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X),
+ CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X),
+ CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
+ CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X),
+ CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X),
+ CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X),
+ CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X),
+ CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
+ CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
+ CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
+ CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
+ CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
+ CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
+ CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
+ CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X),
+ CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
+ CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
+ CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
+ CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
+ CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
+};
+
+/*
+ * init code
+ */
+
+int __init omap2_clk_init(void)
+{
+ const struct prcm_config *prcm;
+ struct omap_clk *c;
+ u32 clkrate;
+ u16 cpu_clkflg;
+
+ if (cpu_is_omap242x()) {
+ prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
+ cpu_mask = RATE_IN_242X;
+ cpu_clkflg = CK_242X;
+ rate_table = omap2420_rate_table;
+ } else if (cpu_is_omap2430()) {
+ prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
+ cpu_mask = RATE_IN_243X;
+ cpu_clkflg = CK_243X;
+ rate_table = omap2430_rate_table;
+ }
+
+ clk_init(&omap2_clk_functions);
+
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ clk_preinit(c->lk.clk);
+
+ osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
+ propagate_rate(&osc_ck);
+ sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
+ propagate_rate(&sys_ck);
+
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ if (c->cpu & cpu_clkflg) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
+ omap2_init_clk_clkdm(c->lk.clk);
+ }
+
+ /* Check the MPU rate set by bootloader */
+ clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck.rate)
+ continue;
+ if (prcm->dpll_speed <= clkrate)
+ break;
+ }
+ curr_prcm_set = prcm;
+
+ recalculate_root_clocks();
+
+ printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
+ "%ld.%01ld/%ld/%ld MHz\n",
+ (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+ (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+ /*
+ * Only enable those clocks we will need, let the drivers
+ * enable other clocks as necessary
+ */
+ clk_enable_init_clocks();
+
+ /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+ vclk = clk_get(NULL, "virt_prcm_set");
+ sclk = clk_get(NULL, "sys_ck");
+ dclk = clk_get(NULL, "dpll_ck");
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
new file mode 100644
index 000000000000..126a9396b3a8
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -0,0 +1,126 @@
+/*
+ * opp2420_data.c - old-style "OPP" table for OMAP2420
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ *
+ * THe format described in this file is deprecated. Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#include "opp2xxx.h"
+#include "sdrc.h"
+#include "clock.h"
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used. Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set. The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+const struct prcm_config omap2420_rate_table[] = {
+ /* PRCM I - FAST */
+ {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
+ RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
+ RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
+ RATE_IN_242X},
+
+ /* PRCM II - FAST */
+ {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
+ RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+ RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+ RATE_IN_242X},
+
+ {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
+ RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+ RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+ RATE_IN_242X},
+
+ /* PRCM III - FAST */
+ {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
+ RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+ RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+ RATE_IN_242X},
+
+ {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
+ RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+ RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+ RATE_IN_242X},
+
+ /* PRCM II - SLOW */
+ {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
+ RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+ RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+ RATE_IN_242X},
+
+ {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
+ RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+ RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+ RATE_IN_242X},
+
+ /* PRCM III - SLOW */
+ {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
+ RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+ RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+ RATE_IN_242X},
+
+ {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
+ RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+ RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+ RATE_IN_242X},
+
+ /* PRCM-VII (boot-bypass) */
+ {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
+ RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+ RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_242X},
+
+ /* PRCM-VII (boot-bypass) */
+ {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
+ RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+ RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_242X},
+
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
new file mode 100644
index 000000000000..edb81672c844
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -0,0 +1,133 @@
+/*
+ * opp2420_data.c - old-style "OPP" table for OMAP2420
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ *
+ * THe format described in this file is deprecated. Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#include "opp2xxx.h"
+#include "sdrc.h"
+#include "clock.h"
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used. Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set. The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+const struct prcm_config omap2430_rate_table[] = {
+ /* PRCM #4 - ratio2 (ES2.1) - FAST */
+ {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
+ R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+ R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #2 - ratio1 (ES2) - FAST */
+ {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_165MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5a - ratio1 - FAST */
+ {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5b - ratio1 - FAST */
+ {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_100MHz,
+ RATE_IN_243X},
+
+ /* PRCM #4 - ratio1 (ES2.1) - SLOW */
+ {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
+ R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+ R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #2 - ratio1 (ES2) - SLOW */
+ {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_165MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5a - ratio1 - SLOW */
+ {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5b - ratio1 - SLOW*/
+ {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_100MHz,
+ RATE_IN_243X},
+
+ /* PRCM-boot/bypass */
+ {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
+ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+ RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_243X},
+
+ /* PRCM-boot/bypass */
+ {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
+ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+ RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_243X},
+
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h
new file mode 100644
index 000000000000..ed6df04e2f29
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2xxx.h
@@ -0,0 +1,424 @@
+/*
+ * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ *
+ * THe format described in this file is deprecated. Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
+
+/**
+ * struct prcm_config - define clock rates on a per-OPP basis (24xx)
+ *
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * This is deprecated. As soon as we have a decent OPP API, we should
+ * move all this stuff to it.
+ */
+struct prcm_config {
+ unsigned long xtal_speed; /* crystal rate */
+ unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
+ unsigned long mpu_speed; /* speed of MPU */
+ unsigned long cm_clksel_mpu; /* mpu divider */
+ unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
+ unsigned long cm_clksel_gfx; /* gfx dividers */
+ unsigned long cm_clksel1_core; /* major subsystem dividers */
+ unsigned long cm_clksel1_pll; /* m,n */
+ unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
+ unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
+ unsigned long base_sdrc_rfr; /* base refresh timing for a set */
+ unsigned char flags;
+};
+
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1 (0x10 << 8)
+#define RX_CLKSEL_DSS2 (0x0 << 13)
+#define RX_CLKSEL_SSI (0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3 (4 << 0)
+#define R1_CLKSEL_L4 (2 << 5)
+#define R1_CLKSEL_USB (4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+ RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+ R1_CLKSEL_L4 | R1_CLKSEL_L3)
+#define R1_CLKSEL_MPU (2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP (2 << 0)
+#define R1_CLKSEL_DSP_IF (2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF)
+#define R1_CLKSEL_GFX (2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM (4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3 (6 << 0)
+#define R2_CLKSEL_L4 (2 << 5)
+#define R2_CLKSEL_USB (2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+ RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+ R2_CLKSEL_L4 | R2_CLKSEL_L3)
+#define R2_CLKSEL_MPU (2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP (2 << 0)
+#define R2_CLKSEL_DSP_IF (3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF)
+#define R2_CLKSEL_GFX (2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM (6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3 (1 << 0)
+#define RB_CLKSEL_L4 (1 << 5)
+#define RB_CLKSEL_USB (1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+ RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+ RB_CLKSEL_L4 | RB_CLKSEL_L3)
+#define RB_CLKSEL_MPU (1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP (1 << 0)
+#define RB_CLKSEL_DSP_IF (1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF)
+#define RB_CLKSEL_GFX (1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM (1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ (0x12 << 15)
+#define RXX_CLKSEL_SSI (0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
+#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
+#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+ RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+ RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+ RIII_CLKSEL_L3)
+#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
+#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
+#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+ RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+ RIII_CLKSEL_DSP)
+#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
+#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
+#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+ RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+ RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \
+ RII_CLKSEL_L3)
+#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
+#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
+#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
+#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL (RII_SYNC_IVA | RII_CLKSEL_IVA | \
+ RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+ RII_CLKSEL_DSP)
+#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
+
+/* 2420-PRCM I 660MHz core */
+#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
+#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
+#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
+#define RI_CM_CLKSEL1_CORE_VAL (RI_CLKSEL_USB | \
+ RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+ RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+ RI_CLKSEL_L4 | RI_CLKSEL_L3)
+#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
+#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
+#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
+#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
+#define RI_SYNC_DSP (1 << 7) /* Activate sync */
+#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
+#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
+#define RI_CM_CLKSEL_DSP_VAL (RI_SYNC_IVA | RI_CLKSEL_IVA | \
+ RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
+ RI_CLKSEL_DSP)
+#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
+#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3 (1 << 0)
+#define RVII_CLKSEL_L4 (1 << 5)
+#define RVII_CLKSEL_DSS1 (1 << 8)
+#define RVII_CLKSEL_DSS2 (0 << 13)
+#define RVII_CLKSEL_VLYNQ (1 << 15)
+#define RVII_CLKSEL_SSI (1 << 20)
+#define RVII_CLKSEL_USB (1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+ RVII_CLKSEL_VLYNQ | \
+ RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \
+ RVII_CLKSEL_L4 | RVII_CLKSEL_L3)
+
+#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP (1 << 0)
+#define RVII_CLKSEL_DSP_IF (1 << 5)
+#define RVII_SYNC_DSP (0 << 7)
+#define RVII_CLKSEL_IVA (1 << 8)
+#define RVII_SYNC_IVA (0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \
+ RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \
+ RVII_CLKSEL_DSP)
+
+#define RVII_CLKSEL_GFX (1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC (0 << 3)
+#define MX_54M_SRC (0 << 5)
+#define MX_APLLS_CLIKIN_12 (3 << 23)
+#define MX_APLLS_CLIKIN_13 (2 << 23)
+#define MX_APLLS_CLIKIN_19_2 (0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12 (133 << 12)
+#define M5A_DPLL_DIV_12 (5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12)
+#define M5A_DPLL_MULT_13 (61 << 12)
+#define M5A_DPLL_DIV_13 (2 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13)
+#define M5A_DPLL_MULT_19 (55 << 12)
+#define M5A_DPLL_DIV_19 (3 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+ MX_APLLS_CLIKIN_19_2)
+/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12 (50 << 12)
+#define M5B_DPLL_DIV_12 (2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12)
+#define M5B_DPLL_MULT_13 (200 << 12)
+#define M5B_DPLL_DIV_13 (12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13)
+#define M5B_DPLL_MULT_19 (125 << 12)
+#define M5B_DPLL_DIV_19 (31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+ MX_APLLS_CLIKIN_19_2)
+/*
+ * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
+ */
+#define M4_DPLL_MULT_12 (133 << 12)
+#define M4_DPLL_DIV_12 (3 << 8)
+#define M4_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12)
+
+#define M4_DPLL_MULT_13 (399 << 12)
+#define M4_DPLL_DIV_13 (12 << 8)
+#define M4_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13)
+
+#define M4_DPLL_MULT_19 (145 << 12)
+#define M4_DPLL_DIV_19 (6 << 8)
+#define M4_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
+ MX_APLLS_CLIKIN_19_2)
+
+/*
+ * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12 (55 << 12)
+#define M3_DPLL_DIV_12 (1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12)
+#define M3_DPLL_MULT_13 (76 << 12)
+#define M3_DPLL_DIV_13 (2 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13)
+#define M3_DPLL_MULT_19 (17 << 12)
+#define M3_DPLL_DIV_19 (0 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+ MX_APLLS_CLIKIN_19_2)
+
+/*
+ * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
+ */
+#define M2_DPLL_MULT_12 (55 << 12)
+#define M2_DPLL_DIV_12 (1 << 8)
+#define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12)
+
+/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
+ * relock time issue */
+/* Core frequency changed from 330/165 to 329/164 MHz*/
+#define M2_DPLL_MULT_13 (76 << 12)
+#define M2_DPLL_DIV_13 (2 << 8)
+#define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13)
+
+#define M2_DPLL_MULT_19 (17 << 12)
+#define M2_DPLL_DIV_19 (0 << 8)
+#define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
+ M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
+ MX_APLLS_CLIKIN_19_2)
+
+/* boot (boot) */
+#define MB_DPLL_MULT (1 << 12)
+#define MB_DPLL_DIV (0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
+ MB_DPLL_DIV | MB_DPLL_MULT | \
+ MX_APLLS_CLIKIN_12)
+
+#define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
+ MB_DPLL_DIV | MB_DPLL_MULT | \
+ MX_APLLS_CLIKIN_13)
+
+#define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
+ MB_DPLL_DIV | MB_DPLL_MULT | \
+ MX_APLLS_CLIKIN_19)
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/* PRCM I target DPLL = 2*330MHz = 660MHz */
+#define MI_DPLL_MULT_12 (55 << 12)
+#define MI_DPLL_DIV_12 (1 << 8)
+#define MI_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
+ MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12)
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12 (50 << 12)
+#define MII_DPLL_DIV_12 (1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
+ MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12)
+#define MII_DPLL_MULT_13 (300 << 12)
+#define MII_DPLL_DIV_13 (12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
+ MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13)
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12 (133 << 12)
+#define MIII_DPLL_DIV_12 (5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
+ MIII_DPLL_DIV_12 | \
+ MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12)
+#define MIII_DPLL_MULT_13 (266 << 12)
+#define MIII_DPLL_DIV_13 (12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
+ MIII_DPLL_DIV_13 | \
+ MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13)
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
+
+/* MPU speed defines */
+#define S12M 12000000
+#define S13M 13000000
+#define S19M 19200000
+#define S26M 26000000
+#define S100M 100000000
+#define S133M 133000000
+#define S150M 150000000
+#define S164M 164000000
+#define S165M 165000000
+#define S199M 199000000
+#define S200M 200000000
+#define S266M 266000000
+#define S300M 300000000
+#define S329M 329000000
+#define S330M 330000000
+#define S399M 399000000
+#define S400M 400000000
+#define S532M 532000000
+#define S600M 600000000
+#define S658M 658000000
+#define S660M 660000000
+#define S798M 798000000
+
+
+extern const struct prcm_config omap2420_rate_table[];
+extern const struct prcm_config omap2430_rate_table[];
+extern const struct prcm_config *rate_table;
+extern const struct prcm_config *curr_prcm_set;
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 12fc7dafec2b..68f57bb67fc5 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -18,6 +18,9 @@
#include <plat/sdrc.h>
#ifndef __ASSEMBLER__
+
+#include <linux/io.h>
+
extern void __iomem *omap2_sdrc_base;
extern void __iomem *omap2_sms_base;
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 4b8b0d65cbf2..00310f21e84f 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -13,6 +13,8 @@
#ifndef __ARCH_ARM_OMAP_CLOCK_H
#define __ARCH_ARM_OMAP_CLOCK_H
+#include <linux/list.h>
+
struct module;
struct clk;
struct clockdomain;
OpenPOWER on IntegriCloud