summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/MSI-HOWTO.txt2
-rw-r--r--Documentation/block/biodoc.txt2
-rw-r--r--Documentation/driver-model/driver.txt2
-rw-r--r--Documentation/filesystems/befs.txt2
-rw-r--r--Documentation/filesystems/configfs/configfs.txt2
-rw-r--r--Documentation/ibm-acpi.txt2
-rw-r--r--Documentation/ide.txt2
-rw-r--r--Documentation/input/amijoy.txt4
-rw-r--r--Documentation/input/atarikbd.txt2
-rw-r--r--Documentation/input/joystick-parport.txt4
-rw-r--r--Documentation/md.txt4
-rw-r--r--Documentation/networking/driver.txt2
-rw-r--r--Documentation/networking/ip-sysctl.txt2
-rw-r--r--Documentation/networking/netif-msg.txt2
-rw-r--r--Documentation/networking/slicecom.txt4
-rw-r--r--Documentation/powerpc/booting-without-of.txt8
-rw-r--r--Documentation/powerpc/eeh-pci-error-recovery.txt2
-rw-r--r--Documentation/s390/cds.txt2
-rw-r--r--Documentation/s390/driver-model.txt2
-rw-r--r--Documentation/scsi/NinjaSCSI.txt12
-rw-r--r--Documentation/sound/alsa/Procfile.txt4
-rw-r--r--Documentation/sparc/sbus_drivers.txt2
-rw-r--r--Documentation/uml/UserModeLinux-HOWTO.txt4
-rw-r--r--Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt2
-rw-r--r--Documentation/video4linux/hauppauge-wintv-cx88-ir.txt2
-rw-r--r--Documentation/x86_64/boot-options.txt2
26 files changed, 40 insertions, 40 deletions
diff --git a/Documentation/MSI-HOWTO.txt b/Documentation/MSI-HOWTO.txt
index 3ec6c720b016..c70306abb7b2 100644
--- a/Documentation/MSI-HOWTO.txt
+++ b/Documentation/MSI-HOWTO.txt
@@ -267,7 +267,7 @@ y = The number of MSI capable devices populated in the system.
vector reserved to avoid the case where some MSI-X capable
drivers may attempt to claim all available vector resources.
-z = The number of MSI-X capable devices pupulated in the system.
+z = The number of MSI-X capable devices populated in the system.
This policy ensures that maximum (x - y) is distributed
evenly among MSI-X capable devices.
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 3646a0aaea82..c41a3e1b4b39 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -783,7 +783,7 @@ all the outstanding requests. There's a third helper to do that:
blk_queue_invalidate_tags(request_queue_t *q)
- Clear the internal block tag queue and readd all the pending requests
+ Clear the internal block tag queue and re-add all the pending requests
to the request queue. The driver will receive them again on the
next request_fn run, just like it did the first time it encountered
them.
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index 59806c9761f7..82132169d47a 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -178,7 +178,7 @@ the driver to that device.
A driver's probe() may return a negative errno value to indicate that
the driver did not bind to this device, in which case it should have
-released all reasources it allocated.
+released all resources it allocated.
int (*remove) (struct device * dev);
diff --git a/Documentation/filesystems/befs.txt b/Documentation/filesystems/befs.txt
index e7aa177e5422..67391a15949a 100644
--- a/Documentation/filesystems/befs.txt
+++ b/Documentation/filesystems/befs.txt
@@ -7,7 +7,7 @@ WARNING
Make sure you understand that this is alpha software. This means that the
implementation is neither complete nor well-tested.
-I DISCLAIM ALL RESPONSIBILTY FOR ANY POSSIBLE BAD EFFECTS OF THIS CODE!
+I DISCLAIM ALL RESPONSIBILITY FOR ANY POSSIBLE BAD EFFECTS OF THIS CODE!
LICENSE
=====
diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index 1a6d45930ebc..8bf0369dcfb7 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -422,7 +422,7 @@ support mkdir(2) or rmdir(2) either. It only allows rename(2). The
"pending" directory does allow mkdir(2) and rmdir(2). An item is
created in the "pending" directory. Its attributes can be modified at
will. Userspace commits the item by renaming it into the "live"
-directory. At this point, the subsystem recieves the ->commit_item()
+directory. At this point, the subsystem receives the ->commit_item()
callback. If all required attributes are filled to satisfaction, the
method returns zero and the item is moved to the "live" directory.
diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt
index 8b3fd82b2ce7..71aa40345272 100644
--- a/Documentation/ibm-acpi.txt
+++ b/Documentation/ibm-acpi.txt
@@ -450,7 +450,7 @@ his laptop (the location of sensors may vary on other models):
No commands can be written to this file.
-EXPERIMENTAL: Embedded controller reigster dump -- /proc/acpi/ibm/ecdump
+EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
------------------------------------------------------------------------
This feature is marked EXPERIMENTAL because the implementation
diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 29866fbfb229..0bf38baa2db9 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -281,7 +281,7 @@ Summary of ide driver parameters for kernel command line
"idex=serialize" : do not overlap operations on idex. Please note
that you will have to specify this option for
- both the respecitve primary and secondary channel
+ both the respective primary and secondary channel
to take effect.
"idex=four" : four drives on idex and ide(x^1) share same ports
diff --git a/Documentation/input/amijoy.txt b/Documentation/input/amijoy.txt
index 3b8b2d43a68e..4f0e89df5c51 100644
--- a/Documentation/input/amijoy.txt
+++ b/Documentation/input/amijoy.txt
@@ -79,10 +79,10 @@ JOY0DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
0=LEFT CONTROLLER PAIR, 1=RIGHT CONTROLLER PAIR.
- (4 counters total).The bit usage for both left and right
+ (4 counters total). The bit usage for both left and right
addresses is shown below. Each 6 bit counter (Y7-Y2,X7-X2) is
clocked by 2 of the signals input from the mouse serial
- stream. Starting with first bit recived:
+ stream. Starting with first bit received:
+-------------------+-----------------------------------------+
| Serial | Bit Name | Description |
diff --git a/Documentation/input/atarikbd.txt b/Documentation/input/atarikbd.txt
index 7171fbf86fae..1e7e5853ba4c 100644
--- a/Documentation/input/atarikbd.txt
+++ b/Documentation/input/atarikbd.txt
@@ -84,7 +84,7 @@ selected.
4.2 Absolute Position reporting
The ikbd can also maintain absolute mouse position. Commands exist for
-reseting the mouse position, setting X/Y scaling, and interrogating the
+resetting the mouse position, setting X/Y scaling, and interrogating the
current mouse position.
4.3 Mouse Cursor Key Mode
diff --git a/Documentation/input/joystick-parport.txt b/Documentation/input/joystick-parport.txt
index 22f039d9da62..ede5f33daad3 100644
--- a/Documentation/input/joystick-parport.txt
+++ b/Documentation/input/joystick-parport.txt
@@ -456,8 +456,8 @@ uses the following kernel/module command line:
8 | Sony PSX DDR controller
9 | SNES mouse
- The exact type of the PSX controller type is autoprobed when used so
-hot swapping should work (but is not recomended).
+ The exact type of the PSX controller type is autoprobed when used, so
+hot swapping should work (but is not recommended).
Should you want to use more than one of parallel ports at once, you can use
gamecon.map2 and gamecon.map3 as additional command line parameters for two
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 38589c9465f1..2202f5dc8ac2 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -307,8 +307,8 @@ Each directory contains:
This applies only to raid1 arrays.
spare - device is working, but not a full member.
This includes spares that are in the process
- of being recoverred to
- This list make grow in future.
+ of being recovered to
+ This list may grow in future.
This can be written to.
Writing "faulty" simulates a failure on the device.
Writing "remove" removes the device from the array.
diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt
index a9ad58b49cc5..4f7da5a2bf4f 100644
--- a/Documentation/networking/driver.txt
+++ b/Documentation/networking/driver.txt
@@ -37,7 +37,7 @@ Transmit path guidelines:
...
}
- And then at the end of your TX reclaimation event handling:
+ And then at the end of your TX reclamation event handling:
if (netif_queue_stopped(dp->dev) &&
TX_BUFFS_AVAIL(dp) > (MAX_SKB_FRAGS + 1))
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 912e2496b70b..fd3c0c012351 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -495,7 +495,7 @@ icmp_errors_use_inbound_ifaddr - BOOLEAN
Note that if no primary address exists for the interface selected,
then the primary address of the first non-loopback interface that
- has one will be used regarldess of this setting.
+ has one will be used regardless of this setting.
Default: 0
diff --git a/Documentation/networking/netif-msg.txt b/Documentation/networking/netif-msg.txt
index 18ad4cea6259..c967ddb90d0b 100644
--- a/Documentation/networking/netif-msg.txt
+++ b/Documentation/networking/netif-msg.txt
@@ -40,7 +40,7 @@ History
Per-interface rather than per-driver message level setting.
More selective control over the type of messages emitted.
- The netif_msg recommandation adds these features with only a minor
+ The netif_msg recommendation adds these features with only a minor
complexity and code size increase.
The recommendation is the following points
diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt
index 59cfd95121fb..5fb21d5d46f0 100644
--- a/Documentation/networking/slicecom.txt
+++ b/Documentation/networking/slicecom.txt
@@ -89,7 +89,7 @@ red: green: meaning:
- - no frame-sync, no signal received, or signal SNAFU.
- on "Everything is OK"
-on on Recepion is ok, but the remote end sends Remote Alarm
+on on Reception is ok, but the remote end sends Remote Alarm
on - The interface is unconfigured
-----------------------------------------------------------------
@@ -257,7 +257,7 @@ which begin with '//' are the comments.
// No alarms - Everything OK
//
// LOS - Loss Of Signal - No signal sensed on the input
-// AIS - Alarm Indication Signal - The remot side sends '11111111'-s,
+// AIS - Alarm Indication Signal - The remote side sends '11111111'-s,
// it tells, that there's an error condition, or it's not
// initialised.
// AUXP - Auxiliary Pattern Indication - 01010101.. received.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index ee272035f781..8ca9a563e221 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -245,7 +245,7 @@ the block to RAM before passing it to the kernel.
---------
The kernel is entered with r3 pointing to an area of memory that is
- roughtly described in include/asm-powerpc/prom.h by the structure
+ roughly described in include/asm-powerpc/prom.h by the structure
boot_param_header:
struct boot_param_header {
@@ -1068,13 +1068,13 @@ while all this has been defined and implemented.
around. It contains no internal offsets or pointers for this
purpose.
- - An example of code for iterating nodes & retreiving properties
+ - An example of code for iterating nodes & retrieving properties
directly from the flattened tree format can be found in the kernel
file arch/ppc64/kernel/prom.c, look at scan_flat_dt() function,
- it's usage in early_init_devtree(), and the corresponding various
+ its usage in early_init_devtree(), and the corresponding various
early_init_dt_scan_*() callbacks. That code can be re-used in a
GPL bootloader, and as the author of that code, I would be happy
- do discuss possible free licencing to any vendor who wishes to
+ to discuss possible free licencing to any vendor who wishes to
integrate all or part of this code into a non-GPL bootloader.
diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt
index be8867d03db8..4530d1bf0286 100644
--- a/Documentation/powerpc/eeh-pci-error-recovery.txt
+++ b/Documentation/powerpc/eeh-pci-error-recovery.txt
@@ -90,7 +90,7 @@ EEH-isolated, there is a firmware call it can make to determine if
this is the case. If so, then the device driver should put itself
into a consistent state (given that it won't be able to complete any
pending work) and start recovery of the card. Recovery normally
-would consist of reseting the PCI device (holding the PCI #RST
+would consist of resetting the PCI device (holding the PCI #RST
line high for two seconds), followed by setting up the device
config space (the base address registers (BAR's), latency timer,
cache line size, interrupt line, and so on). This is followed by a
diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt
index 265a313456ee..d80e5733827d 100644
--- a/Documentation/s390/cds.txt
+++ b/Documentation/s390/cds.txt
@@ -133,7 +133,7 @@ determine the device driver owning the device that raised the interrupt.
In order not to introduce a new I/O concept to the common Linux code,
Linux/390 preserves the IRQ concept and semantically maps the ESA/390
subchannels to Linux as IRQs. This allows Linux/390 to support up to 64k
-different IRQs, uniquely representig a single device each.
+different IRQs, uniquely representing a single device each.
Up to kernel 2.4, Linux/390 used to provide interfaces via the IRQ (subchannel).
For internal use of the common I/O layer, these are still there. However,
diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt
index 5295a835d55d..62c082387aea 100644
--- a/Documentation/s390/driver-model.txt
+++ b/Documentation/s390/driver-model.txt
@@ -157,7 +157,7 @@ notify: This function is called by the common I/O layer for some state changes
* In online state, device detached (CIO_GONE) or last path gone
(CIO_NO_PATH). The driver must return !0 to keep the device; for
return code 0, the device will be deleted as usual (also when no
- notify function is registerd). If the driver wants to keep the
+ notify function is registered). If the driver wants to keep the
device, it is moved into disconnected state.
* In disconnected state, device operational again (CIO_OPER). The
common I/O layer performs some sanity checks on device number and
diff --git a/Documentation/scsi/NinjaSCSI.txt b/Documentation/scsi/NinjaSCSI.txt
index 73cec1211d7b..3229b64cf24e 100644
--- a/Documentation/scsi/NinjaSCSI.txt
+++ b/Documentation/scsi/NinjaSCSI.txt
@@ -36,18 +36,18 @@ Socket 1:
product info: "IO DATA", "CBSC16 ", "1"
-[2] Get Linux kernel source, and extract it to /usr/src.
- Because NinjaSCSI driver requiers some SCSI header files in Linux kernel
- source.
- I recomend rebuilding your kernel. This eliminate some versioning problem.
+[2] Get the Linux kernel source, and extract it to /usr/src.
+ Because the NinjaSCSI driver requires some SCSI header files in Linux
+ kernel source, I recommend rebuilding your kernel; this eliminates
+ some versioning problems.
$ cd /usr/src
$ tar -zxvf linux-x.x.x.tar.gz
$ cd linux
$ make config
...
-[3] If you use this driver with Kernel 2.2, Unpack pcmcia-cs in some directory
- and make & install. This driver requies pcmcia-cs header file.
+[3] If you use this driver with Kernel 2.2, unpack pcmcia-cs in some directory
+ and make & install. This driver requires the pcmcia-cs header file.
$ cd /usr/src
$ tar zxvf cs-pcmcia-cs-3.x.x.tar.gz
...
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index b1386168f6a9..18f04bd1b9a0 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -182,10 +182,10 @@ When the problem is related with PCM, first try to turn on xrun_debug
mode. This will give you the kernel messages when and where xrun
happened.
-If it's really a bug, report it with the following information
+If it's really a bug, report it with the following information:
- the name of the driver/card, show in /proc/asound/cards
- - the reigster dump, if available (e.g. card*/cmipci)
+ - the register dump, if available (e.g. card*/cmipci)
when it's a PCM problem,
diff --git a/Documentation/sparc/sbus_drivers.txt b/Documentation/sparc/sbus_drivers.txt
index 7ac0695cba59..8418d35484fc 100644
--- a/Documentation/sparc/sbus_drivers.txt
+++ b/Documentation/sparc/sbus_drivers.txt
@@ -98,7 +98,7 @@ in your .remove method.
Any memory allocated, registers mapped, IRQs registered,
etc. must be undone by your .remove method so that all resources
-of your device are relased by the time it returns.
+of your device are released by the time it returns.
You should _NOT_ use the for_each_sbus(), for_each_sbusdev(),
and for_all_sbusdev() interfaces. They are deprecated, will be
diff --git a/Documentation/uml/UserModeLinux-HOWTO.txt b/Documentation/uml/UserModeLinux-HOWTO.txt
index d9c8c11e4710..b60590eca18f 100644
--- a/Documentation/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/uml/UserModeLinux-HOWTO.txt
@@ -3903,9 +3903,9 @@
1133..55.. UUMMLL ddooeessnn''tt wwoorrkk wwhheenn //ttmmpp iiss aann NNFFSS ffiilleessyysstteemm
- This seems to be a similar situation with the resierfs problem above.
+ This seems to be a similar situation with the ReiserFS problem above.
Some versions of NFS seems not to handle mmap correctly, which UML
- depends on. The workaround is have /tmp be non-NFS directory.
+ depends on. The workaround is have /tmp be a non-NFS directory.
1133..66.. UUMMLL hhaannggss oonn bboooott wwhheenn ccoommppiilleedd wwiitthh ggpprrooff ssuuppppoorrtt
diff --git a/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
index 93fec32a1188..faccee68f603 100644
--- a/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
+++ b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
@@ -30,7 +30,7 @@ provide for a handler)
GP_SAMPLE register is at 0x35C058
Bits are then right shifted into the GP_SAMPLE register at the specified
-rate; you get an interrupt when a full DWORD is recieved.
+rate; you get an interrupt when a full DWORD is received.
You need to recover the actual RC5 bits out of the (oversampled) IR sensor
bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An
actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
diff --git a/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt b/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
index 93fec32a1188..faccee68f603 100644
--- a/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
+++ b/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
@@ -30,7 +30,7 @@ provide for a handler)
GP_SAMPLE register is at 0x35C058
Bits are then right shifted into the GP_SAMPLE register at the specified
-rate; you get an interrupt when a full DWORD is recieved.
+rate; you get an interrupt when a full DWORD is received.
You need to recover the actual RC5 bits out of the (oversampled) IR sensor
bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An
actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 74b77f9e91bc..f3c57f43ba64 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -109,7 +109,7 @@ Idle loop
Rebooting
reboot=b[ios] | t[riple] | k[bd] [, [w]arm | [c]old]
- bios Use the CPU reboto vector for warm reset
+ bios Use the CPU reboot vector for warm reset
warm Don't set the cold reboot flag
cold Set the cold reboot flag
triple Force a triple fault (init)
OpenPOWER on IntegriCloud