diff options
| -rw-r--r-- | arch/arm/mach-omap1/lcd_dma.c | 24 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/time.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 27 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap4panda.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rm680.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/mux.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/smartreflex.c | 11 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/voltage.c | 1 |
9 files changed, 39 insertions, 38 deletions
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index c9088d85da04..453809359ba6 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -37,7 +37,7 @@ int omap_lcd_dma_running(void) * On OMAP1510, internal LCD controller will start the transfer * when it gets enabled, so assume DMA running if LCD enabled. */ - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) return 1; @@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); void omap_set_lcd_dma_b1_rotation(int rotate) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); BUG(); return; @@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); void omap_set_lcd_dma_b1_mirror(int mirror) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); BUG(); } @@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA virtual resulotion is not supported " "in 1510 mode\n"); BUG(); @@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); BUG(); } @@ -177,7 +177,7 @@ static void set_b1_regs(void) bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); /* 1510 DMA requires the bottom address to be 2 more * than the actual last memory access location. */ - if (cpu_is_omap1510() && + if (cpu_is_omap15xx() && lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) bottom += 2; ei = PIXSTEP(0, 0, 1, 0); @@ -241,7 +241,7 @@ static void set_b1_regs(void) return; /* Suppress warning about uninitialized vars */ } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); @@ -343,7 +343,7 @@ void omap_free_lcd_dma(void) BUG(); return; } - if (!cpu_is_omap1510()) + if (!cpu_is_omap15xx()) omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); lcd_dma.reserved = 0; @@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void) * connected. Otherwise the OMAP internal controller will * start the transfer when it gets enabled. */ - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CTRL); @@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma); void omap_setup_lcd_dma(void) { BUG_ON(lcd_dma.active); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { /* Set some reasonable defaults */ omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); } set_b1_regs(); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { u16 w; w = omap_readw(OMAP1610_DMA_LCD_CCR); @@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void) u16 w; lcd_dma.active = 0; - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CCR); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index f83fc335c613..6885d2fac183 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -44,7 +44,6 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> -#include <linux/sched.h> #include <asm/system.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e906e05bb41b..9a2a31e011ce 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = { static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { - twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); - if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; @@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* gpio + 1 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + 1; - gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); - /* Disable until needed */ - gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; + ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + if (ret < 0) { + devkit8000_lcd_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); + } /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; - gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); - /* Disable until needed */ - gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); + ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + if (ret < 0) { + devkit8000_dvi_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); + } return 0; } diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e001a048dc0c..e944025d5ef8 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -409,8 +409,6 @@ static void __init omap4_panda_init(void) platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* OMAP4 Panda uses internal transceiver so register nop transceiver */ - usb_nop_xceiv_register(); omap4_ehci_init(); usb_musb_init(&musb_board_data); } diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index cb77be7ac44f..39a71bb8a308 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = { static struct regulator_init_data rm680_vemmc = { .constraints = { .name = "rm680_vemmc", - .min_uV = 2900000, - .max_uV = 2900000, - .apply_uV = 1, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_STATUS diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fae49d12bc76..98148b6c36e9 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags, if (!partition->base) { pr_err("%s: Could not ioremap mux partition at 0x%08x\n", __func__, partition->phys); + kfree(partition); return -ENODEV; } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a4aa1920a75c..2f864e4b085d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -168,9 +168,10 @@ static void omap3_core_restore_context(void) * once during boot sequence, but this works as we are not using secure * services. */ -static void omap3_save_secure_ram_context(u32 target_mpu_state) +static void omap3_save_secure_ram_context(void) { u32 ret; + int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { /* @@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state) pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); ret = _omap_save_secure_sram((u32 *) __pa(omap3_secure_ram_storage)); - pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state); + pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { printk(KERN_ERR "save_secure_sram() returns %08x\n", @@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void) local_fiq_disable(); omap_dma_global_context_save(); - omap3_save_secure_ram_context(PWRDM_POWER_ON); + omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 77ecebf3fae2..c37e823266d3 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -834,7 +832,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; + ret = -EINVAL; + goto err_free_devinfo; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -966,7 +965,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) } sr_info = _sr_lookup(pdata->voltdm); - if (!sr_info) { + if (IS_ERR(sr_info)) { dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", __func__); return -EINVAL; diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index ed6079c94c57..12be525b8df4 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) strcat(name, vdd->voltdm.name); vdd->debug_dir = debugfs_create_dir(name, voltage_dir); + kfree(name); if (IS_ERR(vdd->debug_dir)) { pr_warning("%s: Unable to create debugfs directory for" " vdd_%s\n", __func__, vdd->voltdm.name); |
