diff options
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe.h | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 73 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 |
3 files changed, 18 insertions, 60 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 7be725cdfea8..d882278851d7 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -754,7 +754,6 @@ enum ixgbe_state_t { __IXGBE_DOWN, __IXGBE_SERVICE_SCHED, __IXGBE_IN_SFP_INIT, - __IXGBE_READ_I2C, }; struct ixgbe_cb { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index ae58a928d05c..da1ea28b5d68 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2910,33 +2910,21 @@ static int ixgbe_get_module_info(struct net_device *dev, struct ixgbe_hw *hw = &adapter->hw; u32 status; u8 sff8472_rev, addr_mode; - int ret_val = 0; bool page_swap = false; - /* avoid concurent i2c reads */ - while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) - msleep(100); - - /* used by the service task */ - set_bit(__IXGBE_READ_I2C, &adapter->state); - /* Check whether we support SFF-8472 or not */ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_SFF_8472_COMP, &sff8472_rev); - if (status != 0) { - ret_val = -EIO; - goto err_out; - } + if (status != 0) + return -EIO; /* addressing mode is not supported */ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_SFF_8472_SWAP, &addr_mode); - if (status != 0) { - ret_val = -EIO; - goto err_out; - } + if (status != 0) + return -EIO; if (addr_mode & IXGBE_SFF_ADDRESSING_MODE) { e_err(drv, "Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n"); @@ -2953,9 +2941,7 @@ static int ixgbe_get_module_info(struct net_device *dev, modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; } -err_out: - clear_bit(__IXGBE_READ_I2C, &adapter->state); - return ret_val; + return 0; } static int ixgbe_get_module_eeprom(struct net_device *dev, @@ -2969,48 +2955,25 @@ static int ixgbe_get_module_eeprom(struct net_device *dev, int i = 0; int ret_val = 0; - /* ixgbe_get_module_info is called before this function in all - * cases, so we do not need any checks we already do above, - * and can trust ee->len to be a known value. - */ + if (ee->len == 0) + return -EINVAL; - while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) - msleep(100); - set_bit(__IXGBE_READ_I2C, &adapter->state); + for (i = ee->offset; i < ee->len; i++) { + /* I2C reads can take long time */ + if (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + return -EBUSY; - /* Read the first block, SFF-8079 */ - for (i = 0; i < ETH_MODULE_SFF_8079_LEN; i++) { - status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte); - if (status != 0) { - /* Error occured while reading module */ + if (i < ETH_MODULE_SFF_8079_LEN) + status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte); + else + status = hw->phy.ops.read_i2c_sff8472(hw, i, &databyte); + + if (status != 0) ret_val = -EIO; - goto err_out; - } - data[i] = databyte; - } - /* If the second block is requested, check if SFF-8472 is supported. */ - if (ee->len == ETH_MODULE_SFF_8472_LEN) { - if (data[IXGBE_SFF_SFF_8472_COMP] == IXGBE_SFF_SFF_8472_UNSUP) - return -EOPNOTSUPP; - - /* Read the second block, SFF-8472 */ - for (i = ETH_MODULE_SFF_8079_LEN; - i < ETH_MODULE_SFF_8472_LEN; i++) { - status = hw->phy.ops.read_i2c_sff8472(hw, - i - ETH_MODULE_SFF_8079_LEN, &databyte); - if (status != 0) { - /* Error occured while reading module */ - ret_val = -EIO; - goto err_out; - } - data[i] = databyte; - } + data[i - ee->offset] = databyte; } -err_out: - clear_bit(__IXGBE_READ_I2C, &adapter->state); - return ret_val; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 61fa0c3fb1d1..2d0e8465a68b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5832,10 +5832,6 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) return; - /* concurent i2c reads are not supported */ - if (test_bit(__IXGBE_READ_I2C, &adapter->state)) - return; - /* someone else is in init, wait until next service event */ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) return; |