summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/bluetooth/Kconfig4
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c124
-rw-r--r--drivers/bluetooth/btmrvl_sdio.h68
3 files changed, 132 insertions, 64 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 8e0de9a05867..11b41fd40c27 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -188,7 +188,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
- Marvell Bluetooth devices, such as 8688.
+ Marvell Bluetooth devices, such as 8688/8787.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
@@ -201,7 +201,7 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
- devices with SDIO interface. Currently only SD8688 chipset is
+ devices with SDIO interface. Currently SD8688/SD8787 chipsets are
supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index dcc2a6ec23f0..7f521d4ac657 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -49,15 +49,59 @@
static u8 user_rmmod;
static u8 sdio_ireg;
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = {
+ .cfg = 0x03,
+ .host_int_mask = 0x04,
+ .host_intstatus = 0x05,
+ .card_status = 0x20,
+ .sq_read_base_addr_a0 = 0x10,
+ .sq_read_base_addr_a1 = 0x11,
+ .card_fw_status0 = 0x40,
+ .card_fw_status1 = 0x41,
+ .card_rx_len = 0x42,
+ .card_rx_unit = 0x43,
+ .io_port_0 = 0x00,
+ .io_port_1 = 0x01,
+ .io_port_2 = 0x02,
+};
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = {
+ .cfg = 0x00,
+ .host_int_mask = 0x02,
+ .host_intstatus = 0x03,
+ .card_status = 0x30,
+ .sq_read_base_addr_a0 = 0x40,
+ .sq_read_base_addr_a1 = 0x41,
+ .card_revision = 0x5c,
+ .card_fw_status0 = 0x60,
+ .card_fw_status1 = 0x61,
+ .card_rx_len = 0x62,
+ .card_rx_unit = 0x63,
+ .io_port_0 = 0x78,
+ .io_port_1 = 0x79,
+ .io_port_2 = 0x7a,
+};
+
static const struct btmrvl_sdio_device btmrvl_sdio_sd6888 = {
.helper = "sd8688_helper.bin",
.firmware = "sd8688.bin",
+ .reg = &btmrvl_reg_8688,
+ .sd_blksz_fw_dl = 64,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
+ .helper = NULL,
+ .firmware = "mrvl/sd8787_uapsta.bin",
+ .reg = &btmrvl_reg_8787,
+ .sd_blksz_fw_dl = 256,
};
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
.driver_data = (unsigned long) &btmrvl_sdio_sd6888 },
+ /* Marvell SD8787 Bluetooth device */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
+ .driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
{ } /* Terminating entry */
};
@@ -69,7 +113,7 @@ static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card)
u8 reg;
int ret;
- reg = sdio_readb(card->func, CARD_RX_UNIT_REG, &ret);
+ reg = sdio_readb(card->func, card->reg->card_rx_unit, &ret);
if (!ret)
card->rx_unit = reg;
@@ -83,11 +127,11 @@ static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat)
*dat = 0;
- fws0 = sdio_readb(card->func, CARD_FW_STATUS0_REG, &ret);
+ fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
if (ret)
return -EIO;
- fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret);
+ fws1 = sdio_readb(card->func, card->reg->card_fw_status1, &ret);
if (ret)
return -EIO;
@@ -101,7 +145,7 @@ static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat)
u8 reg;
int ret;
- reg = sdio_readb(card->func, CARD_RX_LEN_REG, &ret);
+ reg = sdio_readb(card->func, card->reg->card_rx_len, &ret);
if (!ret)
*dat = (u16) reg << card->rx_unit;
@@ -113,7 +157,7 @@ static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card,
{
int ret;
- sdio_writeb(card->func, mask, HOST_INT_MASK_REG, &ret);
+ sdio_writeb(card->func, mask, card->reg->host_int_mask, &ret);
if (ret) {
BT_ERR("Unable to enable the host interrupt!");
ret = -EIO;
@@ -128,13 +172,13 @@ static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card,
u8 host_int_mask;
int ret;
- host_int_mask = sdio_readb(card->func, HOST_INT_MASK_REG, &ret);
+ host_int_mask = sdio_readb(card->func, card->reg->host_int_mask, &ret);
if (ret)
return -EIO;
host_int_mask &= ~mask;
- sdio_writeb(card->func, host_int_mask, HOST_INT_MASK_REG, &ret);
+ sdio_writeb(card->func, host_int_mask, card->reg->host_int_mask, &ret);
if (ret < 0) {
BT_ERR("Unable to disable the host interrupt!");
return -EIO;
@@ -150,7 +194,7 @@ static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits)
int ret;
for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
- status = sdio_readb(card->func, CARD_STATUS_REG, &ret);
+ status = sdio_readb(card->func, card->reg->card_status, &ret);
if (ret)
goto failed;
if ((status & bits) == bits)
@@ -299,7 +343,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
u8 base0, base1;
void *tmpfwbuf = NULL;
u8 *fwbuf;
- u16 len;
+ u16 len, blksz_dl = card->sd_blksz_fw_dl;
int txlen = 0, tx_blocks = 0, count = 0;
ret = request_firmware(&fw_firmware, card->firmware,
@@ -345,7 +389,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
base0 = sdio_readb(card->func,
- SQ_READ_BASE_ADDRESS_A0_REG, &ret);
+ card->reg->sq_read_base_addr_a0, &ret);
if (ret) {
BT_ERR("BASE0 register read failed:"
" base0 = 0x%04X(%d)."
@@ -355,7 +399,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
goto done;
}
base1 = sdio_readb(card->func,
- SQ_READ_BASE_ADDRESS_A1_REG, &ret);
+ card->reg->sq_read_base_addr_a1, &ret);
if (ret) {
BT_ERR("BASE1 register read failed:"
" base1 = 0x%04X(%d)."
@@ -403,20 +447,19 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
if (firmwarelen - offset < txlen)
txlen = firmwarelen - offset;
- tx_blocks =
- (txlen + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE;
+ tx_blocks = (txlen + blksz_dl - 1) / blksz_dl;
memcpy(fwbuf, &firmware[offset], txlen);
}
ret = sdio_writesb(card->func, card->ioport, fwbuf,
- tx_blocks * SDIO_BLOCK_SIZE);
+ tx_blocks * blksz_dl);
if (ret < 0) {
BT_ERR("FW download, writesb(%d) failed @%d",
count, offset);
- sdio_writeb(card->func, HOST_CMD53_FIN, CONFIG_REG,
- &ret);
+ sdio_writeb(card->func, HOST_CMD53_FIN,
+ card->reg->cfg, &ret);
if (ret)
BT_ERR("writeb failed (CFG)");
}
@@ -597,7 +640,7 @@ static void btmrvl_sdio_interrupt(struct sdio_func *func)
priv = card->priv;
- ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret);
+ ireg = sdio_readb(card->func, card->reg->host_intstatus, &ret);
if (ret) {
BT_ERR("sdio_readb: read int status register failed");
return;
@@ -613,7 +656,7 @@ static void btmrvl_sdio_interrupt(struct sdio_func *func)
sdio_writeb(card->func, ~(ireg) & (DN_LD_HOST_INT_STATUS |
UP_LD_HOST_INT_STATUS),
- HOST_INTSTATUS_REG, &ret);
+ card->reg->host_intstatus, &ret);
if (ret) {
BT_ERR("sdio_writeb: clear int status register failed");
return;
@@ -664,7 +707,7 @@ static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
goto release_irq;
}
- reg = sdio_readb(func, IO_PORT_0_REG, &ret);
+ reg = sdio_readb(func, card->reg->io_port_0, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
@@ -672,7 +715,7 @@ static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
card->ioport = reg;
- reg = sdio_readb(func, IO_PORT_1_REG, &ret);
+ reg = sdio_readb(func, card->reg->io_port_1, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
@@ -680,7 +723,7 @@ static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
card->ioport |= (reg << 8);
- reg = sdio_readb(func, IO_PORT_2_REG, &ret);
+ reg = sdio_readb(func, card->reg->io_port_2, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
@@ -815,6 +858,8 @@ exit:
static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
{
int ret = 0;
+ u8 fws0;
+ int pollnum = MAX_POLL_TRIES;
if (!card || !card->func) {
BT_ERR("card or function is NULL!");
@@ -827,20 +872,36 @@ static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
goto done;
}
- ret = btmrvl_sdio_download_helper(card);
+ /* Check if other function driver is downloading the firmware */
+ fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
if (ret) {
- BT_ERR("Failed to download helper!");
+ BT_ERR("Failed to read FW downloading status!");
ret = -EIO;
goto done;
}
+ if (fws0) {
+ BT_DBG("BT not the winner (%#x). Skip FW downloading", fws0);
+
+ /* Give other function more time to download the firmware */
+ pollnum *= 10;
+ } else {
+ if (card->helper) {
+ ret = btmrvl_sdio_download_helper(card);
+ if (ret) {
+ BT_ERR("Failed to download helper!");
+ ret = -EIO;
+ goto done;
+ }
+ }
- if (btmrvl_sdio_download_fw_w_helper(card)) {
- BT_ERR("Failed to download firmware!");
- ret = -EIO;
- goto done;
+ if (btmrvl_sdio_download_fw_w_helper(card)) {
+ BT_ERR("Failed to download firmware!");
+ ret = -EIO;
+ goto done;
+ }
}
- if (btmrvl_sdio_verify_fw_download(card, MAX_POLL_TRIES)) {
+ if (btmrvl_sdio_verify_fw_download(card, pollnum)) {
BT_ERR("FW failed to be active in time!");
ret = -ETIMEDOUT;
goto done;
@@ -864,7 +925,7 @@ static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv)
sdio_claim_host(card->func);
- sdio_writeb(card->func, HOST_POWER_UP, CONFIG_REG, &ret);
+ sdio_writeb(card->func, HOST_POWER_UP, card->reg->cfg, &ret);
sdio_release_host(card->func);
@@ -893,8 +954,10 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
if (id->driver_data) {
struct btmrvl_sdio_device *data = (void *) id->driver_data;
- card->helper = data->helper;
+ card->helper = data->helper;
card->firmware = data->firmware;
+ card->reg = data->reg;
+ card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
}
if (btmrvl_sdio_register_dev(card) < 0) {
@@ -1011,3 +1074,4 @@ MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL v2");
MODULE_FIRMWARE("sd8688_helper.bin");
MODULE_FIRMWARE("sd8688.bin");
+MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 27329f107e5a..43d35a609ca9 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -47,44 +47,46 @@
/* Max retry number of CMD53 write */
#define MAX_WRITE_IOMEM_RETRY 2
-/* Host Control Registers */
-#define IO_PORT_0_REG 0x00
-#define IO_PORT_1_REG 0x01
-#define IO_PORT_2_REG 0x02
-
-#define CONFIG_REG 0x03
-#define HOST_POWER_UP BIT(1)
-#define HOST_CMD53_FIN BIT(2)
-
-#define HOST_INT_MASK_REG 0x04
-#define HIM_DISABLE 0xff
-#define HIM_ENABLE (BIT(0) | BIT(1))
-
-#define HOST_INTSTATUS_REG 0x05
-#define UP_LD_HOST_INT_STATUS BIT(0)
-#define DN_LD_HOST_INT_STATUS BIT(1)
-
-/* Card Control Registers */
-#define SQ_READ_BASE_ADDRESS_A0_REG 0x10
-#define SQ_READ_BASE_ADDRESS_A1_REG 0x11
-
-#define CARD_STATUS_REG 0x20
-#define DN_LD_CARD_RDY BIT(0)
-#define CARD_IO_READY BIT(3)
-
-#define CARD_FW_STATUS0_REG 0x40
-#define CARD_FW_STATUS1_REG 0x41
-#define FIRMWARE_READY 0xfedc
-
-#define CARD_RX_LEN_REG 0x42
-#define CARD_RX_UNIT_REG 0x43
-
+/* register bitmasks */
+#define HOST_POWER_UP BIT(1)
+#define HOST_CMD53_FIN BIT(2)
+
+#define HIM_DISABLE 0xff
+#define HIM_ENABLE (BIT(0) | BIT(1))
+
+#define UP_LD_HOST_INT_STATUS BIT(0)
+#define DN_LD_HOST_INT_STATUS BIT(1)
+
+#define DN_LD_CARD_RDY BIT(0)
+#define CARD_IO_READY BIT(3)
+
+#define FIRMWARE_READY 0xfedc
+
+
+struct btmrvl_sdio_card_reg {
+ u8 cfg;
+ u8 host_int_mask;
+ u8 host_intstatus;
+ u8 card_status;
+ u8 sq_read_base_addr_a0;
+ u8 sq_read_base_addr_a1;
+ u8 card_revision;
+ u8 card_fw_status0;
+ u8 card_fw_status1;
+ u8 card_rx_len;
+ u8 card_rx_unit;
+ u8 io_port_0;
+ u8 io_port_1;
+ u8 io_port_2;
+};
struct btmrvl_sdio_card {
struct sdio_func *func;
u32 ioport;
const char *helper;
const char *firmware;
+ const struct btmrvl_sdio_card_reg *reg;
+ u16 sd_blksz_fw_dl;
u8 rx_unit;
struct btmrvl_private *priv;
};
@@ -92,6 +94,8 @@ struct btmrvl_sdio_card {
struct btmrvl_sdio_device {
const char *helper;
const char *firmware;
+ const struct btmrvl_sdio_card_reg *reg;
+ u16 sd_blksz_fw_dl;
};
OpenPOWER on IntegriCloud