diff options
| -rw-r--r-- | drivers/net/e1000e/82571.c | 56 | ||||
| -rw-r--r-- | drivers/net/e1000e/hw.h | 1 |
2 files changed, 57 insertions, 0 deletions
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 11a273e4ba23..cb6c7b1c1fb8 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -78,6 +78,8 @@ static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw); static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw); static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw); static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw); +static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active); +static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active); /** * e1000_init_phy_params_82571 - Init PHY func ptrs. @@ -113,6 +115,8 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) phy->type = e1000_phy_bm; phy->ops.acquire = e1000_get_hw_semaphore_82574; phy->ops.release = e1000_put_hw_semaphore_82574; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574; break; default: return -E1000_ERR_PHY; @@ -656,6 +660,58 @@ static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw) } /** + * e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU D0 state according to the active flag. + * LPLU will not be activated unless the + * device autonegotiation advertisement meets standards of + * either 10 or 10/100 or 10/100/1000 at all duplexes. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active) +{ + u16 data = er32(POEMB); + + if (active) + data |= E1000_PHY_CTRL_D0A_LPLU; + else + data &= ~E1000_PHY_CTRL_D0A_LPLU; + + ew32(POEMB, data); + return 0; +} + +/** + * e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * The low power link up (lplu) state is set to the power management level D3 + * when active is true, else clear lplu for D3. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. + **/ +static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active) +{ + u16 data = er32(POEMB); + + if (!active) { + data &= ~E1000_PHY_CTRL_NOND0A_LPLU; + } else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || + (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) || + (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) { + data |= E1000_PHY_CTRL_NOND0A_LPLU; + } + + ew32(POEMB, data); + return 0; +} + +/** * e1000_acquire_nvm_82571 - Request for access to the EEPROM * @hw: pointer to the HW structure * diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index ba302a5c2c30..e774380c7cec 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -83,6 +83,7 @@ enum e1e_registers { E1000_EXTCNF_CTRL = 0x00F00, /* Extended Configuration Control */ E1000_EXTCNF_SIZE = 0x00F08, /* Extended Configuration Size */ E1000_PHY_CTRL = 0x00F10, /* PHY Control Register in CSR */ +#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */ E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */ E1000_PBS = 0x01008, /* Packet Buffer Size */ E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */ |
