diff options
59 files changed, 453 insertions, 1204 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 01790958e69b..24d955c21d35 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -920,6 +920,7 @@ config ARCH_U300 select COMMON_CLK select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select SPARSE_IRQ help Support for ST-Ericsson U300 series mobile platforms. diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 45c97b1ee9b1..7799e910e271 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -38,7 +38,7 @@ #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> #include "core.h" diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index adbfb1994582..4b50228a6771 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -43,11 +43,10 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> #include "clock.h" -#include <csp/secHw.h> #include <mach/csp/secHw_def.h> #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c index 96273ff34956..5050833817b7 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c @@ -26,15 +26,15 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/stdint.h> -#include <csp/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/export.h> #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <csp/reg.h> -#include <csp/delay.h> +#include <mach/csp/reg.h> +#include <linux/delay.h> /* ---- Private Constants and Types --------------------------------------- */ @@ -61,21 +61,21 @@ static int chipcHw_divide(int num, int denom) /****************************************************************************/ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; + uint32_t __iomem *pPLLReg = NULL; + uint32_t __iomem *pClockCtrl = NULL; + uint32_t __iomem *pDependentClock = NULL; uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ uint32_t dependentClockType = 0; uint32_t vcoHz = 0; /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { + if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { uint64_t adjustFreq = 0; vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ @@ -86,13 +86,13 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur } else { vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); } vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); switch (clock) { @@ -187,51 +187,51 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur if (pPLLReg) { /* Obtain PLL clock frequency */ - if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { + if (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { /* Return crystal clock frequency when bypassed */ return chipcHw_XTAL_FREQ_Hz; } else if (clock == chipcHw_CLOCK_DDR) { /* DDR frequency is configured in PLLDivider register */ - return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); + return chipcHw_divide (vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256)); } else { /* From chip revision number B0, LCD clock is internally divided by 2 */ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { vcoHz >>= 1; } /* Obtain PLL clock frequency using VCO dividers */ - return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); + return chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); } } else if (pClockCtrl) { /* Obtain divider clock frequency */ uint32_t div; uint32_t freq = 0; - if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { + if (readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { /* Return crystal clock frequency when bypassed */ return chipcHw_XTAL_FREQ_Hz; } else if (pDependentClock) { /* Identify the dependent clock frequency */ switch (dependentClockType) { case PLL_CLOCK: - if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { + if (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { /* Use crystal clock frequency when dependent PLL clock is bypassed */ freq = chipcHw_XTAL_FREQ_Hz; } else { /* Obtain PLL clock frequency using VCO dividers */ - div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK; + div = readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK; freq = div ? chipcHw_divide(vcoHz, div) : 0; } break; case NON_PLL_CLOCK: - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { + if (pDependentClock == &pChipcHw->ACLKClock) { freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); } else { - if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { + if (readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { /* Use crystal clock frequency when dependent divider clock is bypassed */ freq = chipcHw_XTAL_FREQ_Hz; } else { /* Obtain divider clock frequency using XTAL dividers */ - div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; + div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK; freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256)); } } @@ -242,7 +242,7 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur freq = chipcHw_XTAL_FREQ_Hz; } - div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK; + div = readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_DIV_MASK; return chipcHw_divide(freq, (div ? div : 256)); } return 0; @@ -261,9 +261,9 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */ uint32_t freq /* [ IN ] Clock frequency in Hz */ ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; + uint32_t __iomem *pPLLReg = NULL; + uint32_t __iomem *pClockCtrl = NULL; + uint32_t __iomem *pDependentClock = NULL; uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ @@ -272,12 +272,12 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu uint32_t desVcoHz = 0; /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { + if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { uint64_t adjustFreq = 0; vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ @@ -289,16 +289,16 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu /* Desired VCO frequency */ desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + (((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1); } else { vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); } vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); switch (clock) { @@ -307,8 +307,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu { REG_LOCAL_IRQ_SAVE; /* Dvide DDR_phy by two to obtain DDR_ctrl clock */ - pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); + writel((readl(&pChipcHw->DDRClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->DDRClock); REG_LOCAL_IRQ_RESTORE; } pPLLReg = &pChipcHw->DDRClock; @@ -329,8 +328,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu /* Configure the VPM:BUS ratio settings */ { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); + writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->VPMClock); REG_LOCAL_IRQ_RESTORE; } pPLLReg = &pChipcHw->VPMClock; @@ -428,9 +426,9 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu /* For DDR settings use only the PLL divider clock */ if (pPLLReg == &pChipcHw->DDRClock) { /* Set M1DIV for PLL1, which controls the DDR clock */ - reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24)); + reg32_write(&pChipcHw->PLLDivider, (readl(&pChipcHw->PLLDivider) & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24)); /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); + freq = chipcHw_divide(vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256)); } else { /* From chip revision number B0, LCD clock is internally divided by 2 */ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { @@ -441,7 +439,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK)); reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq)); /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); + freq = chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); } /* Wait for for atleast 200ns as per the protocol to change frequency */ udelay(1); @@ -460,16 +458,16 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu if (pDependentClock) { switch (dependentClockType) { case PLL_CLOCK: - divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq); + divider = chipcHw_divide(chipcHw_divide (desVcoHz, (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq); break; case NON_PLL_CLOCK: { uint32_t sourceClock = 0; - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { + if (pDependentClock == &pChipcHw->ACLKClock) { sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); } else { - uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; + uint32_t div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK; sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256)); } divider = chipcHw_divide(sourceClock, freq); @@ -483,7 +481,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu if (divider) { REG_LOCAL_IRQ_SAVE; /* Set the divider to obtain the required frequency */ - *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK); + writel((readl(pClockCtrl) & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK), pClockCtrl); REG_LOCAL_IRQ_RESTORE; return freq; } @@ -515,25 +513,26 @@ static int vpmPhaseAlignA0(void) int count = 0; for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) { - phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT; + phaseControl = (readl(&pChipcHw->VPMClock) & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT; phaseValue = 0; prevPhaseComp = 0; /* Step 1: Look for falling PH_COMP transition */ /* Read the contents of VPM Clock resgister */ - phaseValue = pChipcHw->VPMClock; + phaseValue = readl(&pChipcHw->VPMClock); do { /* Store previous value of phase comparator */ prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP; /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; + phaseValue = readl(&pChipcHw->VPMClock); if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { phaseControl = (0x3F & (phaseControl - 1)); @@ -557,12 +556,13 @@ static int vpmPhaseAlignA0(void) for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { phaseControl = (0x3F & (phaseControl + 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); + phaseValue = readl(&pChipcHw->VPMClock); /* Count number of adjustment made */ adjustCount++; } @@ -581,12 +581,13 @@ static int vpmPhaseAlignA0(void) for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); + phaseValue = readl(&pChipcHw->VPMClock); /* Count number of adjustment made */ adjustCount++; } @@ -605,12 +606,13 @@ static int vpmPhaseAlignA0(void) for (count = 0; (count < 5); count++) { phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); + phaseValue = readl(&pChipcHw->VPMClock); /* Count number of adjustment made */ adjustCount++; } @@ -631,14 +633,14 @@ static int vpmPhaseAlignA0(void) /* Store previous value of phase comparator */ prevPhaseComp = phaseValue; /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= - chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; + phaseValue = readl(&pChipcHw->VPMClock); if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { phaseControl = (0x3F & (phaseControl - 1)); @@ -661,13 +663,13 @@ static int vpmPhaseAlignA0(void) } /* For VPM Phase should be perfectly aligned. */ - phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F); + phaseControl = (((readl(&pChipcHw->VPMClock) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F); { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT); + writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT), &pChipcHw->VPMClock); /* Load new phase value */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); REG_LOCAL_IRQ_RESTORE; } @@ -697,7 +699,7 @@ int chipcHw_vpmPhaseAlign(void) int adjustCount = 0; /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; + writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1); /* Disable HW VPM phase alignment */ chipcHw_vpmHwPhaseAlignDisable(); /* Enable SW VPM phase alignment */ @@ -715,23 +717,24 @@ int chipcHw_vpmPhaseAlign(void) phaseControl--; } else { /* Enable VPM access */ - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; + writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1); /* Return adjust count */ return adjustCount; } /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); /* Count adjustment */ adjustCount++; } } /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; + writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1); return -1; } diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c index 367df75d4bb3..8377d8054168 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c @@ -26,15 +26,15 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/stdint.h> -#include <csp/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/export.h> #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <csp/reg.h> -#include <csp/delay.h> +#include <mach/csp/reg.h> +#include <linux/delay.h> /* ---- Private Constants and Types --------------------------------------- */ /* @@ -73,9 +73,9 @@ void chipcHw_pll2Enable(uint32_t vcoFreqHz) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | + chipcHw_REG_PLL_CONFIG_A_RESET, + &pChipcHw->PLLConfig2); pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN | chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER | @@ -87,28 +87,30 @@ void chipcHw_pll2Enable(uint32_t vcoFreqHz) chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT); /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; + writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus); /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider2 = pllPreDivider2; + writel(pllPreDivider2, &pChipcHw->PLLPreDivider2); /* Set NDIV Frac */ - pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f; + writel(chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider2); /* This has to be removed once the default values are fixed for PLL2. */ - pChipcHw->PLLControl12 = 0x38000700; - pChipcHw->PLLControl22 = 0x00000015; + writel(0x38000700, &pChipcHw->PLLControl12); + writel(0x00000015, &pChipcHw->PLLControl22); /* Reset PLL2 */ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig2); } else { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig2); } REG_LOCAL_IRQ_RESTORE; } @@ -119,22 +121,25 @@ void chipcHw_pll2Enable(uint32_t vcoFreqHz) { REG_LOCAL_IRQ_SAVE; /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig2 &= + writel(readl(&pChipcHw->PLLConfig2) & ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); + chipcHw_REG_PLL_CONFIG_POWER_DOWN), + &pChipcHw->PLLConfig2); REG_LOCAL_IRQ_RESTORE; } /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) + while (!(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED)) ; { REG_LOCAL_IRQ_SAVE; /* Remove digital reset */ - pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET; + writel(readl(&pChipcHw->PLLConfig2) & + ~chipcHw_REG_PLL_CONFIG_D_RESET, + &pChipcHw->PLLConfig2); REG_LOCAL_IRQ_RESTORE; } @@ -157,9 +162,9 @@ void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | + chipcHw_REG_PLL_CONFIG_A_RESET, + &pChipcHw->PLLConfig); /* Setting VCO frequency */ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { pllPreDivider = @@ -182,30 +187,22 @@ void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) } /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; + writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus); /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider = pllPreDivider; + writel(pllPreDivider, &pChipcHw->PLLPreDivider); /* Set NDIV Frac */ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f_SS; + writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f_SS, &pChipcHw->PLLDivider); } else { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f; + writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider); } /* Reset PLL1 */ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig); } else { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_800_1600 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig); } REG_LOCAL_IRQ_RESTORE; @@ -216,22 +213,19 @@ void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) { REG_LOCAL_IRQ_SAVE; /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig &= - ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); + writel(readl(&pChipcHw->PLLConfig) & ~(chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_POWER_DOWN), &pChipcHw->PLLConfig); REG_LOCAL_IRQ_RESTORE; } /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED) - || !(pChipcHw-> - PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) + while (!(readl(&pChipcHw->PLLStatus) & chipcHw_REG_PLL_STATUS_LOCKED) + || !(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED)) ; /* Remove digital reset */ { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET; + writel(readl(&pChipcHw->PLLConfig) & ~chipcHw_REG_PLL_CONFIG_D_RESET, &pChipcHw->PLLConfig); REG_LOCAL_IRQ_RESTORE; } } @@ -267,11 +261,7 @@ void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initializ chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET); /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */ - pChipcHw->ACLKClock = - (pChipcHw-> - ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> - armBusRatio & - chipcHw_REG_ACLKClock_CLK_DIV_MASK); + writel((readl(&pChipcHw->ACLKClock) & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> armBusRatio & chipcHw_REG_ACLKClock_CLK_DIV_MASK), &pChipcHw->ACLKClock); /* Set various core component frequencies. The order in which this is done is important for some. */ /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */ diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c index 2671d8896bbb..f95ce913fa1e 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c @@ -13,11 +13,11 @@ *****************************************************************************/ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> +#include <linux/types.h> #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <csp/intcHw.h> -#include <csp/cache.h> +#include <mach/csp/intcHw_reg.h> +#include <asm/cacheflush.h> /* ---- Private Constants and Types --------------------------------------- */ /* ---- Private Variables ------------------------------------------------- */ @@ -50,17 +50,18 @@ void chipcHw_reset(uint32_t mask) chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); } /* Bypass the PLL clocks before reboot */ - pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; - pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; + writel(readl(&pChipcHw->UARTClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT, + &pChipcHw->UARTClock); + writel(readl(&pChipcHw->SPIClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT, + &pChipcHw->SPIClock); /* Copy the chipcHw_warmReset_run_from_aram function into ARAM */ do { - ((uint32_t *) MM_IO_BASE_ARAM)[i] = - ((uint32_t *) &chipcHw_reset_run_from_aram)[i]; + writel(((uint32_t *) &chipcHw_reset_run_from_aram)[i], ((uint32_t __iomem *) MM_IO_BASE_ARAM) + i); i++; - } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */ + } while (readl(((uint32_t __iomem*) MM_IO_BASE_ARAM) + i - 1) != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */ - CSP_CACHE_FLUSH_ALL; + flush_cache_all(); /* run the function from ARAM */ runFunc(); diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c index 6b9be2e98e51..547f746c7ff4 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c @@ -25,11 +25,11 @@ /****************************************************************************/ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> -#include <csp/string.h> -#include <stddef.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/stddef.h> -#include <csp/dmacHw.h> +#include <mach/csp/dmacHw.h> #include <mach/csp/dmacHw_reg.h> #include <mach/csp/dmacHw_priv.h> #include <mach/csp/chipcHw_inline.h> @@ -55,33 +55,32 @@ static uint32_t GetFifoSize(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handl ) { uint32_t val = 0; dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_MISC_t *pMiscReg = - (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module); + dmacHw_MISC_t __iomem *pMiscReg = (void __iomem *)dmacHw_REG_MISC_BASE(pCblk->module); switch (pCblk->channel) { case 0: - val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm2.lo) & 0x70000000) >> 28; break; case 1: - val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm3.hi) & 0x70000000) >> 28; break; case 2: - val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm3.lo) & 0x70000000) >> 28; break; case 3: - val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm4.hi) & 0x70000000) >> 28; break; case 4: - val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm4.lo) & 0x70000000) >> 28; break; case 5: - val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm5.hi) & 0x70000000) >> 28; break; case 6: - val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm5.lo) & 0x70000000) >> 28; break; case 7: - val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm6.hi) & 0x70000000) >> 28; break; } diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c index a1f328357aa4..fe438699d11e 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c @@ -26,10 +26,10 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> -#include <stddef.h> +#include <linux/types.h> +#include <linux/stddef.h> -#include <csp/dmacHw.h> +#include <mach/csp/dmacHw.h> #include <mach/csp/dmacHw_reg.h> #include <mach/csp/dmacHw_priv.h> diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c index 16225e43f3c3..dc4137ff75ca 100644 --- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c +++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c @@ -26,10 +26,10 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/stdint.h> +#include <linux/errno.h> +#include <linux/types.h> -#include <csp/tmrHw.h> +#include <mach/csp/tmrHw.h> #include <mach/csp/tmrHw_reg.h> #define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0 diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h deleted file mode 100644 index f01da877148e..000000000000 --- a/arch/arm/mach-bcmring/include/cfg_global.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _CFG_GLOBAL_H_ -#define _CFG_GLOBAL_H_ - -#include <cfg_global_defines.h> - -#define CFG_GLOBAL_CHIP BCM11107 -#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING -#define CFG_GLOBAL_CHIP_REV 0xB0 -#define CFG_GLOBAL_RAM_SIZE 0x10000000 -#define CFG_GLOBAL_RAM_BASE 0x00000000 -#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000 - -#endif /* _CFG_GLOBAL_H_ */ diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h deleted file mode 100644 index caa20e59db99..000000000000 --- a/arch/arm/mach-bcmring/include/csp/cache.h +++ /dev/null @@ -1,35 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_CACHE_H -#define CSP_CACHE_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include <csp/stdint.h> - -/* ---- Public Constants and Types --------------------------------------- */ - -#if defined(__KERNEL__) && !defined(STANDALONE) -#include <asm/cacheflush.h> - -#define CSP_CACHE_FLUSH_ALL flush_cache_all() - -#else - -#define CSP_CACHE_FLUSH_ALL - -#endif - -#endif /* CSP_CACHE_H */ diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h deleted file mode 100644 index 8b3d80367293..000000000000 --- a/arch/arm/mach-bcmring/include/csp/delay.h +++ /dev/null @@ -1,36 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_DELAY_H -#define CSP_DELAY_H - -/* ---- Include Files ---------------------------------------------------- */ - -/* Some CSP routines require use of the following delay routines. Use the OS */ -/* version if available, otherwise use a CSP specific definition. */ -/* void udelay(unsigned long usecs); */ -/* void mdelay(unsigned long msecs); */ - -#if defined(__KERNEL__) && !defined(STANDALONE) - #include <linux/delay.h> -#else - #include <mach/csp/delay.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_DELAY_H */ diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h deleted file mode 100644 index 51357dd5b666..000000000000 --- a/arch/arm/mach-bcmring/include/csp/errno.h +++ /dev/null @@ -1,32 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_ERRNO_H -#define CSP_ERRNO_H - -/* ---- Include Files ---------------------------------------------------- */ - -#if defined(__KERNEL__) -#include <linux/errno.h> -#elif defined(CSP_SIMULATION) -#include <asm-generic/errno.h> -#else -#include <errno.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_ERRNO_H */ diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h deleted file mode 100644 index 1c639c8ee08f..000000000000 --- a/arch/arm/mach-bcmring/include/csp/intcHw.h +++ /dev/null @@ -1,40 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -/****************************************************************************/ -/** -* @file intcHw.h -* -* @brief generic interrupt controller API -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef _INTCHW_H -#define _INTCHW_H - -/* ---- Include Files ---------------------------------------------------- */ -#include <mach/csp/intcHw_reg.h> - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ -static inline void intcHw_irq_disable(void *basep, uint32_t mask); -static inline void intcHw_irq_enable(void *basep, uint32_t mask); - -#endif /* _INTCHW_H */ - diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h deleted file mode 100644 index c30d2a5975a6..000000000000 --- a/arch/arm/mach-bcmring/include/csp/module.h +++ /dev/null @@ -1,32 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_MODULE_H -#define CSP_MODULE_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ - #include <linux/module.h> -#else - #define EXPORT_SYMBOL(symbol) -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_MODULE_H */ diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h deleted file mode 100644 index b9d7e0732dfc..000000000000 --- a/arch/arm/mach-bcmring/include/csp/secHw.h +++ /dev/null @@ -1,65 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file secHw.h -* -* @brief Definitions for accessing low level security features -* -*/ -/****************************************************************************/ -#ifndef SECHW_H -#define SECHW_H - -typedef void (*secHw_FUNC_t) (void); - -typedef enum { - secHw_MODE_SECURE = 0x0, /* Switches processor into secure mode */ - secHw_MODE_NONSECURE = 0x1 /* Switches processor into non-secure mode */ -} secHw_MODE; - -/****************************************************************************/ -/** -* @brief Requesting to execute the function in secure mode -* -* This function requests the given function to run in secure mode -* -*/ -/****************************************************************************/ -void secHw_RunSecure(secHw_FUNC_t /* Function to run in secure mode */ - ); - -/****************************************************************************/ -/** -* @brief Sets the mode -* -* his function sets the processor mode (secure/non-secure) -* -*/ -/****************************************************************************/ -void secHw_SetMode(secHw_MODE /* Processor mode */ - ); - -/****************************************************************************/ -/** -* @brief Get the current mode -* -* This function retieves the processor mode (secure/non-secure) -* -*/ -/****************************************************************************/ -void secHw_GetMode(secHw_MODE *); - -#endif /* SECHW_H */ diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h deleted file mode 100644 index 3a8718bbf700..000000000000 --- a/arch/arm/mach-bcmring/include/csp/stdint.h +++ /dev/null @@ -1,30 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_STDINT_H -#define CSP_STDINT_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ -#include <linux/types.h> -#else -#include <stdint.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_STDINT_H */ diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h deleted file mode 100644 index ad9e4005f141..000000000000 --- a/arch/arm/mach-bcmring/include/csp/string.h +++ /dev/null @@ -1,34 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - - -#ifndef CSP_STRING_H -#define CSP_STRING_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ - #include <linux/string.h> -#else - #include <string.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_STRING_H */ - diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/mach/cfg_global.h index b5beb0b30734..449133eacdf5 100644 --- a/arch/arm/mach-bcmring/include/cfg_global_defines.h +++ b/arch/arm/mach-bcmring/include/mach/cfg_global.h @@ -38,3 +38,14 @@ #define IMAGE_HEADER_SIZE_CHECKSUM 4 #endif +#ifndef _CFG_GLOBAL_H_ +#define _CFG_GLOBAL_H_ + +#define CFG_GLOBAL_CHIP BCM11107 +#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING +#define CFG_GLOBAL_CHIP_REV 0xB0 +#define CFG_GLOBAL_RAM_SIZE 0x10000000 +#define CFG_GLOBAL_RAM_BASE 0x00000000 +#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000 + +#endif /* _CFG_GLOBAL_H_ */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h index 933ce68ed90b..0a89e0c63419 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h @@ -17,7 +17,7 @@ /* ---- Include Files ---------------------------------------------------- */ #include <mach/csp/cap.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> /* ---- Public Constants and Types --------------------------------------- */ #define CAP_CONFIG0_VPM_DIS 0x00000001 diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h index 161973385faf..39f09cb89208 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h @@ -17,9 +17,9 @@ /* ---- Include Files ----------------------------------------------------- */ -#include <csp/stdint.h> -#include <csp/errno.h> -#include <csp/reg.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <mach/csp/reg.h> #include <mach/csp/chipcHw_reg.h> /* ---- Public Constants and Types ---------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h index 03238c299001..a66f3f7abb86 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h @@ -17,8 +17,8 @@ /* ---- Include Files ----------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/reg.h> +#include <linux/errno.h> +#include <mach/csp/reg.h> #include <mach/csp/chipcHw_reg.h> #include <mach/csp/chipcHw_def.h> @@ -47,7 +47,7 @@ static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, /****************************************************************************/ static inline uint32_t chipcHw_getChipId(void) { - return pChipcHw->ChipId; + return readl(&pChipcHw->ChipId); } /****************************************************************************/ @@ -59,15 +59,16 @@ static inline uint32_t chipcHw_getChipId(void) /****************************************************************************/ static inline void chipcHw_enableSpreadSpectrum(void) { - if ((pChipcHw-> - PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != + if ((readl(&pChipcHw-> + PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { - ddrcReg_PHY_ADDR_CTL_REGP->ssCfg = - (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) | + writel((0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) | (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK << - ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT); - ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |= - ddrcReg_PHY_ADDR_SS_CTRL_ENABLE; + ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT), + &ddrcReg_PHY_ADDR_CTL_REGP->ssCfg); + writel(readl(&ddrcReg_PHY_ADDR_CTL_REGP->ssCtl) | + ddrcReg_PHY_ADDR_SS_CTRL_ENABLE, + &ddrcReg_PHY_ADDR_CTL_REGP->ssCtl); } } @@ -93,8 +94,8 @@ static inline void chipcHw_disableSpreadSpectrum(void) /****************************************************************************/ static inline uint32_t chipcHw_getChipProductId(void) { - return (pChipcHw-> - ChipId & chipcHw_REG_CHIPID_BASE_MASK) >> + return (readl(&pChipcHw-> + ChipId) & chipcHw_REG_CHIPID_BASE_MASK) >> chipcHw_REG_CHIPID_BASE_SHIFT; } @@ -109,7 +110,7 @@ static inline uint32_t chipcHw_getChipProductId(void) /****************************************************************************/ static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void) { - return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK; + return readl(&pChipcHw->ChipId) & chipcHw_REG_CHIPID_REV_MASK; } /****************************************************************************/ @@ -156,7 +157,7 @@ static inline void chipcHw_busInterfaceClockDisable(uint32_t mask) /****************************************************************************/ static inline uint32_t chipcHw_getBusInterfaceClockStatus(void) { - return pChipcHw->BusIntfClock; + return readl(&pChipcHw->BusIntfClock); } /****************************************************************************/ @@ -215,8 +216,9 @@ static inline void chipcHw_softResetDisable(uint64_t mask) /* Deassert module soft reset */ REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 ^= ctrl1; - pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); + writel(readl(&pChipcHw->SoftReset1) ^ ctrl1, &pChipcHw->SoftReset1); + writel(readl(&pChipcHw->SoftReset2) ^ (ctrl2 & + (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2); REG_LOCAL_IRQ_RESTORE; } @@ -227,9 +229,10 @@ static inline void chipcHw_softResetEnable(uint64_t mask) uint32_t unhold = 0; REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 |= ctrl1; + writel(readl(&pChipcHw->SoftReset1) | ctrl1, &pChipcHw->SoftReset1); /* Mask out unhold request bits */ - pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); + writel(readl(&pChipcHw->SoftReset2) | (ctrl2 & + (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2); /* Process unhold requests */ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) { @@ -246,7 +249,7 @@ static inline void chipcHw_softResetEnable(uint64_t mask) if (unhold) { /* Make sure unhold request is effective */ - pChipcHw->SoftReset1 &= ~unhold; + writel(readl(&pChipcHw->SoftReset1) & ~unhold, &pChipcHw->SoftReset1); } REG_LOCAL_IRQ_RESTORE; } @@ -307,7 +310,7 @@ static inline void chipcHw_setOTPOption(uint64_t mask) /****************************************************************************/ static inline uint32_t chipcHw_getStickyBits(void) { - return pChipcHw->Sticky; + return readl(&pChipcHw->Sticky); } /****************************************************************************/ @@ -328,7 +331,7 @@ static inline void chipcHw_setStickyBits(uint32_t mask) bits |= chipcHw_REG_STICKY_POR_BROM; } else { uint32_t sticky; - sticky = pChipcHw->Sticky; + sticky = readl(pChipcHw->Sticky); if ((mask & chipcHw_REG_STICKY_BOOT_DONE) && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) { @@ -355,7 +358,7 @@ static inline void chipcHw_setStickyBits(uint32_t mask) bits |= chipcHw_REG_STICKY_GENERAL_5; } } - pChipcHw->Sticky = bits; + writel(bits, pChipcHw->Sticky); REG_LOCAL_IRQ_RESTORE; } @@ -377,7 +380,7 @@ static inline void chipcHw_clearStickyBits(uint32_t mask) (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 | chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 | chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) { - uint32_t sticky = pChipcHw->Sticky; + uint32_t sticky = readl(&pChipcHw->Sticky); if ((mask & chipcHw_REG_STICKY_BOOT_DONE) && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) { @@ -410,7 +413,7 @@ static inline void chipcHw_clearStickyBits(uint32_t mask) mask &= ~chipcHw_REG_STICKY_GENERAL_5; } } - pChipcHw->Sticky = bits | mask; + writel(bits | mask, &pChipcHw->Sticky); REG_LOCAL_IRQ_RESTORE; } @@ -426,7 +429,7 @@ static inline void chipcHw_clearStickyBits(uint32_t mask) /****************************************************************************/ static inline uint32_t chipcHw_getSoftStraps(void) { - return pChipcHw->SoftStraps; + return readl(&pChipcHw->SoftStraps); } /****************************************************************************/ @@ -456,7 +459,7 @@ static inline void chipcHw_setSoftStraps(uint32_t strapOptions) /****************************************************************************/ static inline uint32_t chipcHw_getPinStraps(void) { - return pChipcHw->PinStraps; + return readl(&pChipcHw->PinStraps); } /****************************************************************************/ @@ -671,9 +674,9 @@ static inline void chipcHw_selectGE3(void) /****************************************************************************/ static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin) { - return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) & + return (readl(chipcHw_REG_GPIO_MUX(pin))) & (chipcHw_REG_GPIO_MUX_MASK << - chipcHw_REG_GPIO_MUX_POSITION(pin))) >> + chipcHw_REG_GPIO_MUX_POSITION(pin)) >> chipcHw_REG_GPIO_MUX_POSITION(pin); } @@ -841,8 +844,8 @@ static inline void chipcHw_setUsbDevice(void) static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, chipcHw_OPTYPE_e type, int mode) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; + uint32_t __iomem *pPLLReg = NULL; + uint32_t __iomem *pClockCtrl = NULL; switch (clock) { case chipcHw_CLOCK_DDR: @@ -1071,7 +1074,7 @@ static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock) /****************************************************************************/ static inline int chipcHw_isSoftwareStrapsEnable(void) { - return pChipcHw->SoftStraps & 0x00000001; + return readl(&pChipcHw->SoftStraps) & 0x00000001; } /****************************************************************************/ @@ -1138,7 +1141,7 @@ static inline void chipcHw_pll2TestDisable(void) /****************************************************************************/ static inline int chipcHw_isPllTestEnable(void) { - return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; + return readl(&pChipcHw->PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; } /****************************************************************************/ @@ -1147,7 +1150,7 @@ static inline int chipcHw_isPllTestEnable(void) /****************************************************************************/ static inline int chipcHw_isPll2TestEnable(void) { - return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; + return readl(&pChipcHw->PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; } /****************************************************************************/ @@ -1183,8 +1186,8 @@ static inline void chipcHw_pll2TestSelect(uint32_t val) /****************************************************************************/ static inline uint8_t chipcHw_getPllTestSelected(void) { - return (uint8_t) ((pChipcHw-> - PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) + return (uint8_t) ((readl(&pChipcHw-> + PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); } @@ -1194,8 +1197,8 @@ static inline uint8_t chipcHw_getPllTestSelected(void) /****************************************************************************/ static inline uint8_t chipcHw_getPll2TestSelected(void) { - return (uint8_t) ((pChipcHw-> - PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) + return (uint8_t) ((readl(&pChipcHw-> + PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); } @@ -1208,7 +1211,8 @@ static inline uint8_t chipcHw_getPll2TestSelected(void) static inline void chipcHw_pll1Disable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(readl(&pChipcHw->PLLConfig) | chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig); REG_LOCAL_IRQ_RESTORE; } @@ -1221,7 +1225,8 @@ static inline void chipcHw_pll1Disable(void) static inline void chipcHw_pll2Disable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(readl(&pChipcHw->PLLConfig2) | chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig2); REG_LOCAL_IRQ_RESTORE; } @@ -1233,7 +1238,8 @@ static inline void chipcHw_pll2Disable(void) static inline void chipcHw_ddrPhaseAlignInterruptEnable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; + writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE, + &pChipcHw->Spare1); REG_LOCAL_IRQ_RESTORE; } @@ -1245,7 +1251,8 @@ static inline void chipcHw_ddrPhaseAlignInterruptEnable(void) static inline void chipcHw_ddrPhaseAlignInterruptDisable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; + writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE, + &pChipcHw->Spare1); REG_LOCAL_IRQ_RESTORE; } @@ -1333,7 +1340,8 @@ static inline void chipcHw_ddrHwPhaseAlignDisable(void) static inline void chipcHw_vpmSwPhaseAlignEnable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE; + writel(readl(&pChipcHw->VPMPhaseCtrl1) | chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE, + &pChipcHw->VPMPhaseCtrl1); REG_LOCAL_IRQ_RESTORE; } @@ -1372,7 +1380,8 @@ static inline void chipcHw_vpmHwPhaseAlignEnable(void) static inline void chipcHw_vpmHwPhaseAlignDisable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE; + writel(readl(&pChipcHw->VPMPhaseCtrl1) & ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE, + &pChipcHw->VPMPhaseCtrl1); REG_LOCAL_IRQ_RESTORE; } @@ -1474,8 +1483,8 @@ chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin) /****************************************************************************/ static inline uint32_t chipcHw_isDdrHwPhaseAligned(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0; + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0; } /****************************************************************************/ @@ -1488,8 +1497,8 @@ static inline uint32_t chipcHw_isDdrHwPhaseAligned(void) /****************************************************************************/ static inline uint32_t chipcHw_isVpmHwPhaseAligned(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0; + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0; } /****************************************************************************/ @@ -1500,8 +1509,8 @@ static inline uint32_t chipcHw_isVpmHwPhaseAligned(void) /****************************************************************************/ static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_STATUS_MASK) >> chipcHw_REG_DDR_PHASE_STATUS_SHIFT; } @@ -1513,8 +1522,8 @@ static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void) /****************************************************************************/ static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_STATUS_MASK) >> chipcHw_REG_VPM_PHASE_STATUS_SHIFT; } @@ -1526,8 +1535,8 @@ static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void) /****************************************************************************/ static inline uint32_t chipcHw_getDdrPhaseControl(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_CTRL_MASK) >> chipcHw_REG_DDR_PHASE_CTRL_SHIFT; } @@ -1539,8 +1548,8 @@ static inline uint32_t chipcHw_getDdrPhaseControl(void) /****************************************************************************/ static inline uint32_t chipcHw_getVpmPhaseControl(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_CTRL_MASK) >> chipcHw_REG_VPM_PHASE_CTRL_SHIFT; } diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h index b162448f613c..26f5d0e4e1dd 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h @@ -24,7 +24,7 @@ #define CHIPCHW_REG_H #include <mach/csp/mm_io.h> -#include <csp/reg.h> +#include <mach/csp/reg.h> #include <mach/csp/ddrcReg.h> #define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC @@ -131,8 +131,8 @@ typedef struct { uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */ } chipcHw_REG_t; -#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS) -#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC) +#define pChipcHw ((chipcHw_REG_t __iomem *) chipcHw_BASE_ADDRESS) +#define pChipcPhysical (MM_ADDR_IO_CHIPC) #define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000 #define chipcHw_REG_CHIPID_BASE_SHIFT 12 diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h index f1b68e26fa6d..39da2c1fdafb 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h @@ -30,8 +30,8 @@ extern "C" { /* ---- Include Files ---------------------------------------------------- */ -#include <csp/reg.h> -#include <csp/stdint.h> +#include <mach/csp/reg.h> +#include <linux/types.h> #include <mach/csp/mm_io.h> @@ -416,7 +416,7 @@ extern "C" { } ddrcReg_PHY_ADDR_CTL_REG_t; #define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400 -#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET)) +#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t __iomem*) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET)) /* @todo These SS definitions are duplicates of ones below */ diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw.h index e6a1dc484ca7..9dc90f46a84d 100644 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw.h @@ -23,9 +23,9 @@ #ifndef _DMACHW_H #define _DMACHW_H -#include <stddef.h> +#include <linux/stddef.h> -#include <csp/stdint.h> +#include <linux/types.h> #include <mach/csp/dmacHw_reg.h> /* Define DMA Channel ID using DMA controller number (m) and channel number (c). diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h index d67e2f8c22de..9d9455e0c391 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h @@ -24,7 +24,7 @@ #ifndef _DMACHW_PRIV_H #define _DMACHW_PRIV_H -#include <csp/stdint.h> +#include <linux/types.h> /* Data type for DMA Link List Item */ typedef struct { diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h index f1ecf96f2da5..7cd0aafa6f6e 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h @@ -24,7 +24,7 @@ #ifndef _DMACHW_REG_H #define _DMACHW_REG_H -#include <csp/stdint.h> +#include <linux/types.h> #include <mach/csp/mm_io.h> /* Data type for 64 bit little endian register */ @@ -121,75 +121,75 @@ typedef struct { } dmacHw_MISC_t; /* Base registers */ -#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */ -#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */ +#define dmacHw_0_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */ +#define dmacHw_1_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */ extern uint32_t dmaChannelCount_0; extern uint32_t dmaChannelCount_1; /* Define channel specific registers */ -#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t)))) +#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t __iomem*) ((char __iomem*)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t)))) /* Raw interrupt status registers */ -#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0))) -#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo) -#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo) -#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo) -#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo) -#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo) +#define dmacHw_REG_INT_RAW_BASE(module) ((char __iomem *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0))) +#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo) +#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo) +#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo) +#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo) +#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo) /* Interrupt status registers */ -#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t))) -#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo) -#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo) -#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo) -#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo) -#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo) +#define dmacHw_REG_INT_STAT_BASE(module) ((char __iomem*)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t))) +#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo) +#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo) +#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo) +#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo) +#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo) /* Interrupt status registers */ -#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t))) -#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo) -#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo) -#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo) -#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo) -#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo) +#define dmacHw_REG_INT_MASK_BASE(module) ((char __iomem*)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t))) +#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo) +#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo) +#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo) +#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo) +#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo) /* Interrupt clear registers */ -#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t))) -#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo) -#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo) -#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo) -#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo) -#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo) -#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo) +#define dmacHw_REG_INT_CLEAR_BASE(module) ((char __iomem*)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t))) +#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo) +#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo) +#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo) +#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo) +#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo) +#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo) /* Software handshaking registers */ -#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t))) -#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo) +#define dmacHw_REG_SW_HS_BASE(module) ((char __iomem*)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t))) +#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo) +#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo) +#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo) +#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo) +#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo) +#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo) /* Miscellaneous registers */ -#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t))) -#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo) -#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo) -#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo) -#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi) -#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo) -#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi) -#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo) -#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi) -#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo) -#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi) -#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo) -#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi) -#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo) -#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi) +#define dmacHw_REG_MISC_BASE(module) ((char __iomem*)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t))) +#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo) +#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo) +#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo) +#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo) +#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo) +#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi) +#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo) +#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi) +#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo) +#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi) +#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo) +#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi) +#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo) +#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi) +#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo) +#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi) /* Channel control registers */ #define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo) diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h index cfa91bed9d34..27f59dd27792 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h @@ -18,7 +18,7 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <cfg_global.h> +#include <mach/cfg_global.h> #include <mach/csp/cap_inline.h> #if defined(__KERNEL__) diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h index 0aeb6a6fe7f8..f59db25b5632 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h @@ -27,8 +27,8 @@ #define _INTCHW_REG_H /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> -#include <csp/reg.h> +#include <linux/types.h> +#include <mach/csp/reg.h> #include <mach/csp/mm_io.h> /* ---- Public Constants and Types --------------------------------------- */ @@ -37,9 +37,9 @@ #define INTCHW_NUM_INTC 3 /* Defines for interrupt controllers. This simplifies and cleans up the function calls. */ -#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0) -#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1) -#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC) +#define INTCHW_INTC0 (MM_IO_BASE_INTC0) +#define INTCHW_INTC1 (MM_IO_BASE_INTC1) +#define INTCHW_SINTC (MM_IO_BASE_SINTC) /* INTC0 - interrupt controller 0 */ #define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */ @@ -232,15 +232,15 @@ /* ---- Public Variable Externs ------------------------------------------ */ /* ---- Public Function Prototypes --------------------------------------- */ /* Clear one or more IRQ interrupts. */ -static inline void intcHw_irq_disable(void *basep, uint32_t mask) +static inline void intcHw_irq_disable(void __iomem *basep, uint32_t mask) { - __REG32(basep + INTCHW_INTENCLEAR) = mask; + writel(mask, basep + INTCHW_INTENCLEAR); } /* Enables one or more IRQ interrupts. */ -static inline void intcHw_irq_enable(void *basep, uint32_t mask) +static inline void intcHw_irq_enable(void __iomem *basep, uint32_t mask) { - __REG32(basep + INTCHW_INTENABLE) = mask; + writel(mask, basep + INTCHW_INTENABLE); } #endif /* _INTCHW_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h index ad58cf873377..d571962f2904 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h +++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h @@ -29,7 +29,7 @@ /* ---- Include Files ---------------------------------------------------- */ #if !defined(CSP_SIMULATION) -#include <cfg_global.h> +#include <mach/cfg_global.h> #endif /* ---- Public Constants and Types --------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h index de92ec6a01aa..47450c23685a 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h +++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h @@ -30,7 +30,7 @@ #include <mach/csp/mm_addr.h> #if !defined(CSP_SIMULATION) -#include <cfg_global.h> +#include <mach/cfg_global.h> #endif /* ---- Public Constants and Types --------------------------------------- */ @@ -49,7 +49,7 @@ #ifdef __ASSEMBLY__ #define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)) #else -#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \ +#define MM_IO_PHYS_TO_VIRT(phys) (void __iomem *)(((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \ (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))) #endif #endif @@ -60,8 +60,8 @@ #ifdef __ASSEMBLY__ #define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)) #else -#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \ - ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))) +#define MM_IO_VIRT_TO_PHYS(virt) (((unsigned long)(virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \ + ((((unsigned long)(virt) & 0x0F000000) << 4) | ((unsigned long)(virt) & 0xFFFFFF))) #endif #endif diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/mach/csp/reg.h index 56654d23c3d7..d9cbdca8cd25 100644 --- a/arch/arm/mach-bcmring/include/csp/reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/reg.h @@ -25,13 +25,14 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> +#include <linux/types.h> +#include <linux/io.h> /* ---- Public Constants and Types --------------------------------------- */ -#define __REG32(x) (*((volatile uint32_t *)(x))) -#define __REG16(x) (*((volatile uint16_t *)(x))) -#define __REG8(x) (*((volatile uint8_t *) (x))) +#define __REG32(x) (*((volatile uint32_t __iomem *)(x))) +#define __REG16(x) (*((volatile uint16_t __iomem *)(x))) +#define __REG8(x) (*((volatile uint8_t __iomem *) (x))) /* Macros used to define a sequence of reserved registers. The start / end */ /* are byte offsets in the particular register definition, with the "end" */ @@ -84,31 +85,31 @@ #endif -static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value) +static inline void reg32_modify_and(volatile uint32_t __iomem *reg, uint32_t value) { REG_LOCAL_IRQ_SAVE; - *reg &= value; + __raw_writel(__raw_readl(reg) & value, reg); REG_LOCAL_IRQ_RESTORE; } -static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value) +static inline void reg32_modify_or(volatile uint32_t __iomem *reg, uint32_t value) { REG_LOCAL_IRQ_SAVE; - *reg |= value; + __raw_writel(__raw_readl(reg) | value, reg); REG_LOCAL_IRQ_RESTORE; } -static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask, +static inline void reg32_modify_mask(volatile uint32_t __iomem *reg, uint32_t mask, uint32_t value) { REG_LOCAL_IRQ_SAVE; - *reg = (*reg & mask) | value; + __raw_writel((__raw_readl(reg) & mask) | value, reg); REG_LOCAL_IRQ_RESTORE; } -static inline void reg32_write(volatile uint32_t *reg, uint32_t value) +static inline void reg32_write(volatile uint32_t __iomem *reg, uint32_t value) { - *reg = value; + __raw_writel(value, reg); } #endif /* CSP_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h index 9cd6a032ab71..55d3cd4fd1e7 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h @@ -34,7 +34,7 @@ /****************************************************************************/ static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; + secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC; if (mask & 0x0000FFFF) { regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF; @@ -53,13 +53,13 @@ static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK /****************************************************************************/ static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; + secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC; if (mask & 0x0000FFFF) { - regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF; + writel(mask & 0x0000FFFF, ®p->reg[secHw_IDX_LS].setUnsecure); } if (mask & 0xFFFF0000) { - regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16; + writel(mask >> 16, ®p->reg[secHw_IDX_MS].setUnsecure); } } @@ -71,7 +71,7 @@ static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MA /****************************************************************************/ static inline uint32_t secHw_getStatus(void) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; + secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC; return (regp->reg[1].status << 16) + regp->reg[0].status; } diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw.h index 2cbb530db8ea..1cc882ae60f5 100644 --- a/arch/arm/mach-bcmring/include/csp/tmrHw.h +++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw.h @@ -23,7 +23,7 @@ #ifndef _TMRHW_H #define _TMRHW_H -#include <csp/stdint.h> +#include <linux/types.h> typedef uint32_t tmrHw_ID_t; /* Timer ID */ typedef uint32_t tmrHw_COUNT_t; /* Timer count */ diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 72543781207b..13e01384d6fc 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -27,7 +27,7 @@ #include <linux/kernel.h> #include <linux/semaphore.h> -#include <csp/dmacHw.h> +#include <mach/csp/dmacHw.h> #include <mach/timer.h> /* ---- Constants and Types ---------------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h index 6ae20a649a97..a0c92b4b8c60 100644 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ b/arch/arm/mach-bcmring/include/mach/hardware.h @@ -22,7 +22,7 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> #include <mach/csp/mm_io.h> /* Hardware addresses of major areas. diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h index 387376ffb56b..f8d51a8b0b15 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_nand.h +++ b/arch/arm/mach-bcmring/include/mach/reg_nand.h @@ -30,7 +30,7 @@ #define __ASM_ARCH_REG_NAND_H /* ---- Include Files ---------------------------------------------------- */ -#include <csp/reg.h> +#include <mach/csp/reg.h> #include <mach/reg_umi.h> /* ---- Constants and Types ---------------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h index 0992842caa77..56dd9de7d83f 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -30,7 +30,7 @@ #define __ASM_ARCH_REG_UMI_H /* ---- Include Files ---------------------------------------------------- */ -#include <csp/reg.h> +#include <mach/csp/reg.h> #include <mach/csp/mm_io.h> /* ---- Constants and Types ---------------------------------------------- */ @@ -233,5 +233,5 @@ #define REG_UMI_BCH_ERR_LOC_WORD 0x00000018 /* location within a page (512 byte) */ #define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0 -#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) +#define REG_UMI_BCH_ERR_LOC_ADDR(index) (readl(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) #endif diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c index 1adec78ec940..33824a81cac4 100644 --- a/arch/arm/mach-bcmring/mm.c +++ b/arch/arm/mach-bcmring/mm.c @@ -20,12 +20,12 @@ #include <mach/hardware.h> #include <mach/csp/mm_io.h> -#define IO_DESC(va, sz) { .virtual = va, \ +#define IO_DESC(va, sz) { .virtual = (unsigned long)va, \ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ .length = sz, \ .type = MT_DEVICE } -#define MEM_DESC(va, sz) { .virtual = va, \ +#define MEM_DESC(va, sz) { .virtual = (unsigned long)va, \ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ .length = sz, \ .type = MT_MEMORY } diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c index af9c3d7e2a0c..59412903466e 100644 --- a/arch/arm/mach-bcmring/timer.c +++ b/arch/arm/mach-bcmring/timer.c @@ -14,7 +14,7 @@ #include <linux/types.h> #include <linux/module.h> -#include <csp/tmrHw.h> +#include <mach/csp/tmrHw.h> #include <mach/timer.h> /* The core.c file initializes timers 1 and 3 as a linux clocksource. */ diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 54d8f34fdee5..f7e12ede008c 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,6 +1,6 @@ if ARCH_U300 -menu "ST-Ericsson AB U300/U330/U335/U365 Platform" +menu "ST-Ericsson AB U300/U335 Platform" comment "ST-Ericsson Mobile Platform Products" @@ -10,46 +10,7 @@ config MACH_U300 select PINCTRL_U300 select PINCTRL_COH901 -comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" - -choice - prompt "U300/U330/U335/U365 system type" - default MACH_U300_BS2X - ---help--- - You need to select the target system, i.e. the - U300/U330/U335/U365 board that you want to compile your kernel - for. - -config MACH_U300_BS2X - bool "S26/S26/B25/B26 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S26/S25 test products. (Also works on - B26/B25 big boards.) - -config MACH_U300_BS330 - bool "S330/B330 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S330/B330 test products. - -config MACH_U300_BS335 - bool "S335/B335 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S335/B335 test products. - -config MACH_U300_BS365 - bool "S365/B365 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S365/B365 test products. - -endchoice +comment "ST-Ericsson U300/U335 Feature Selections" config U300_DEBUG bool "Debug support for U300" diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 7e47d37aeb0e..5a86c58da396 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -7,7 +7,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_ARCH_U300) += u300.o obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_I2C_STU300) += i2c.o diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 03acf1883ec7..ef6f602b7e48 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -3,7 +3,7 @@ * arch/arm/mach-u300/core.c * * - * Copyright (C) 2007-2010 ST-Ericsson SA + * Copyright (C) 2007-2012 ST-Ericsson SA * License terms: GNU General Public License (GPL) version 2 * Core platform support, IRQ handling and device definitions. * Author: Linus Walleij <linus.walleij@stericsson.com> @@ -31,23 +31,26 @@ #include <linux/pinctrl/pinconf-generic.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-u300.h> +#include <linux/platform_data/pinctrl-coh901.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/hardware/vic.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> #include <mach/coh901318.h> #include <mach/hardware.h> #include <mach/syscon.h> -#include <mach/dma_channels.h> -#include <mach/gpio-u300.h> +#include <mach/irqs.h> +#include "timer.h" #include "spi.h" #include "i2c.h" #include "u300-gpio.h" +#include "dma_channels.h" /* * Static I/O mappings that are needed for booting the U300 platforms. The @@ -76,7 +79,7 @@ static struct map_desc u300_io_desc[] __initdata = { }, }; -void __init u300_map_io(void) +static void __init u300_map_io(void) { iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); /* We enable a real big DMA buffer if need be. */ @@ -101,7 +104,6 @@ static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, { IRQ_U300_UART0 }, &uart0_plat_data); /* The U335 have an additional UART1 on the APP CPU */ -#ifdef CONFIG_MACH_U300_BS335 static struct amba_pl011_data uart1_plat_data = { #ifdef CONFIG_COH901318 .dma_filter = coh901318_filter_id, @@ -113,7 +115,6 @@ static struct amba_pl011_data uart1_plat_data = { /* Fast device at 0x7000 offset */ static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, { IRQ_U300_UART1 }, &uart1_plat_data); -#endif /* AHB device at 0x4000 offset */ static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); @@ -152,9 +153,7 @@ static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, */ static struct amba_device *amba_devs[] __initdata = { &uart0_device, -#ifdef CONFIG_MACH_U300_BS335 &uart1_device, -#endif &pl022_device, &pl172_device, &mmcsd_device, @@ -188,7 +187,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT2, .flags = IORESOURCE_IRQ, }, -#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) { .name = "gpio3", .start = IRQ_U300_GPIO_PORT3, @@ -201,8 +199,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT4, .flags = IORESOURCE_IRQ, }, -#endif -#ifdef CONFIG_MACH_U300_BS335 { .name = "gpio5", .start = IRQ_U300_GPIO_PORT5, @@ -215,7 +211,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT6, .flags = IORESOURCE_IRQ, }, -#endif /* CONFIG_MACH_U300_BS335 */ }; static struct resource keypad_resources[] = { @@ -323,7 +318,6 @@ static struct resource dma_resource[] = { } }; -#ifdef CONFIG_MACH_U300_BS335 /* points out all dma slave channels. * Syntax is [A1, B1, A2, B2, .... ,-1,-1] * Select all channels from A to B, end of list is marked with -1,-1 @@ -336,14 +330,6 @@ static int dma_slave_channels[] = { static int dma_memcpy_channels[] = { U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1}; -#else /* CONFIG_MACH_U300_BS335 */ - -static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1}; -static int dma_memcpy_channels[] = { - U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1}; - -#endif - /** register dma for memory access * * active 1 means dma intends to access memory @@ -1395,7 +1381,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .param.ctrl_lli = flags_memcpy_lli, .param.ctrl_lli_last = flags_memcpy_lli_last, }, -#ifdef CONFIG_MACH_U300_BS335 { .number = U300_DMA_UART1_TX, .name = "UART1 TX", @@ -1406,28 +1391,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .name = "UART1 RX", .priority_high = 0, } -#else - { - .number = U300_DMA_GENERAL_PURPOSE_9, - .name = "GENERAL 09", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_10, - .name = "GENERAL 10", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - } -#endif }; @@ -1480,18 +1443,7 @@ static struct platform_device pinctrl_device = { * GPIO block, with different number of ports. */ static struct u300_gpio_platform u300_gpio_plat = { -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) - .variant = U300_GPIO_COH901335, - .ports = 3, -#endif -#ifdef CONFIG_MACH_U300_BS335 - .variant = U300_GPIO_COH901571_3_BS335, .ports = 7, -#endif -#ifdef CONFIG_MACH_U300_BS365 - .variant = U300_GPIO_COH901571_3_BS365, - .ports = 5, -#endif .gpio_base = 0, .gpio_irq_base = IRQ_U300_GPIO_BASE, .pinctrl_device = &pinctrl_device, @@ -1651,7 +1603,7 @@ static struct platform_device *platform_devs[] __initdata = { * together so some interrupts are connected to the first one and some * to the second one. */ -void __init u300_init_irq(void) +static void __init u300_init_irq(void) { u32 mask[2] = {0, 0}; struct clk *clk; @@ -1756,29 +1708,11 @@ static void __init u300_init_check_chip(void) printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ "(chip ID 0x%04x)\n", chipname, val); -#ifdef CONFIG_MACH_U300_BS330 - if ((val & 0xFF00U) != 0xd800) { - printk(KERN_ERR "Platform configured for BS330 " \ - "with DB3200 but %s detected, expect problems!", - chipname); - } -#endif -#ifdef CONFIG_MACH_U300_BS335 if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) { printk(KERN_ERR "Platform configured for BS335 " \ " with DB3350 but %s detected, expect problems!", chipname); } -#endif -#ifdef CONFIG_MACH_U300_BS365 - if ((val & 0xFF00U) != 0xe800) { - printk(KERN_ERR "Platform configured for BS365 " \ - "with DB3210 but %s detected, expect problems!", - chipname); - } -#endif - - } /* @@ -1811,7 +1745,7 @@ static void __init u300_assign_physmem(void) } } -void __init u300_init_devices(void) +static void __init u300_init_machine(void) { int i; u16 val; @@ -1852,7 +1786,7 @@ void __init u300_init_devices(void) /* Forward declare this function from the watchdog */ void coh901327_watchdog_reset(void); -void u300_restart(char mode, const char *cmd) +static void u300_restart(char mode, const char *cmd) { switch (mode) { case 's': @@ -1868,3 +1802,15 @@ void u300_restart(char mode, const char *cmd) /* Wait for system do die/reset. */ while (1); } + +MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") + /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ + .atag_offset = 0x100, + .map_io = u300_map_io, + .nr_irqs = NR_IRQS_U300, + .init_irq = u300_init_irq, + .handle_irq = vic_handle_irq, + .timer = &u300_timer, + .init_machine = u300_init_machine, + .restart = u300_restart, +MACHINE_END diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/dma_channels.h index b239149ba0d0..4e8a88fbca49 100644 --- a/arch/arm/mach-u300/include/mach/dma_channels.h +++ b/arch/arm/mach-u300/dma_channels.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/dma_channels.h * * - * Copyright (C) 2007-2009 ST-Ericsson + * Copyright (C) 2007-2012 ST-Ericsson * License terms: GNU General Public License (GPL) version 2 * Map file for the U300 dma driver. * Author: Per Friden <per.friden@stericsson.com> @@ -50,19 +50,10 @@ #define U300_DMA_GENERAL_PURPOSE_6 35 #define U300_DMA_GENERAL_PURPOSE_7 36 #define U300_DMA_GENERAL_PURPOSE_8 37 -#ifdef CONFIG_MACH_U300_BS335 #define U300_DMA_UART1_TX 38 #define U300_DMA_UART1_RX 39 -#else -#define U300_DMA_GENERAL_PURPOSE_9 38 -#define U300_DMA_GENERAL_PURPOSE_10 39 -#endif -#ifdef CONFIG_MACH_U300_BS335 #define U300_DMA_DEVICE_CHANNELS 32 -#else -#define U300_DMA_DEVICE_CHANNELS 30 -#endif #define U300_DMA_CHANNELS 40 diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index cb04bd6ab3e7..0d4620ed853c 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-u300/i2c.c * - * Copyright (C) 2009 ST-Ericsson AB + * Copyright (C) 2009-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * * Register board i2c devices @@ -261,7 +261,6 @@ static struct i2c_board_info __initdata bus0_i2c_board_info[] = { }; static struct i2c_board_info __initdata bus1_i2c_board_info[] = { -#ifdef CONFIG_MACH_U300_BS335 { .type = "fwcam", .addr = 0x10, @@ -270,9 +269,6 @@ static struct i2c_board_info __initdata bus1_i2c_board_info[] = { .type = "fwcam", .addr = 0x5d, }, -#else - { }, -#endif }; void __init u300_i2c_register_board_devices(void) diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h deleted file mode 100644 index 92e3cc872c66..000000000000 --- a/arch/arm/mach-u300/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -int __clk_get(struct clk *clk); -void __clk_put(struct clk *clk); - -#endif diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index ec09c1e07b1a..e27425a63fa1 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/irqs.h * * - * Copyright (C) 2006-2009 ST-Ericsson AB + * Copyright (C) 2006-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * IRQ channel definitions for the U300 platforms. * Author: Linus Walleij <linus.walleij@stericsson.com> @@ -31,10 +31,6 @@ #define IRQ_U300_XGAM_GAMCON 14 #define IRQ_U300_XGAM_CDI 15 #define IRQ_U300_XGAM_CDICON 16 -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -/* MMIACC not used on the DB3210 or DB3350 chips */ -#define IRQ_U300_XGAM_MMIACC 17 -#endif #define IRQ_U300_XGAM_PDI 18 #define IRQ_U300_XGAM_PDICON 19 #define IRQ_U300_XGAM_GAMEACC 20 @@ -55,8 +51,6 @@ #define IRQ_U300_GPIO_PORT1 34 #define IRQ_U300_GPIO_PORT2 35 -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ - defined(CONFIG_MACH_U300_BS335) /* These are for DB3150, DB3200 and DB3350 */ #define IRQ_U300_WDOG 36 #define IRQ_U300_EVHIST 37 @@ -68,15 +62,8 @@ #define IRQ_U300_RTC 43 #define IRQ_U300_NFIF 44 #define IRQ_U300_NFIF2 45 -#endif - -/* DB3150 and DB3200 have only 45 IRQs */ -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_VIC_IRQS_END 46 -#endif /* The DB3350-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS335 #define IRQ_U300_ISP_F0 46 #define IRQ_U300_ISP_F1 47 #define IRQ_U300_ISP_F2 48 @@ -89,25 +76,6 @@ #define IRQ_U300_GPIO_PORT5 55 #define IRQ_U300_GPIO_PORT6 56 #define U300_VIC_IRQS_END 57 -#endif - -/* The DB3210-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS365 -#define IRQ_U300_GPIO_PORT3 36 -#define IRQ_U300_GPIO_PORT4 37 -#define IRQ_U300_WDOG 38 -#define IRQ_U300_EVHIST 39 -#define IRQ_U300_MSPRO 40 -#define IRQ_U300_MMCSD_MCIINTR0 41 -#define IRQ_U300_MMCSD_MCIINTR1 42 -#define IRQ_U300_I2C0 43 -#define IRQ_U300_I2C1 44 -#define IRQ_U300_RTC 45 -#define IRQ_U300_NFIF 46 -#define IRQ_U300_NFIF2 47 -#define IRQ_U300_SYSCON_PLL_LOCK 48 -#define U300_VIC_IRQS_END 49 -#endif /* Maximum 8*7 GPIO lines */ #ifdef CONFIG_PINCTRL_COH901 @@ -117,6 +85,6 @@ #define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) #endif -#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) +#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) #endif diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h deleted file mode 100644 index 096333f32fc3..000000000000 --- a/arch/arm/mach-u300/include/mach/platform.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/platform.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Basic platform init and mapping functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __ASSEMBLY__ - -void u300_map_io(void); -void u300_init_irq(void); -void u300_init_devices(void); -void u300_restart(char, const char *); -extern struct sys_timer u300_timer; - -#endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h index 6e84f07a7c6f..10bdd0be9774 100644 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ b/arch/arm/mach-u300/include/mach/syscon.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/syscon.h * * - * Copyright (C) 2008 ST-Ericsson AB + * Copyright (C) 2008-2012 ST-Ericsson AB * * Author: Rickard Andersson <rickard.andersson@stericsson.com> */ @@ -36,9 +36,7 @@ #define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) /* Reset lines for SLOW devices 16bit (R/W) */ #define U300_SYSCON_RSR (0x0014) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) -#endif #define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) #define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) #define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) @@ -50,9 +48,7 @@ #define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) /* Reset lines for FAST devices 16bit (R/W) */ #define U300_SYSCON_RFR (0x0018) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) -#endif #define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) #define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) #define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) @@ -62,10 +58,8 @@ #define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) /* Reset lines for the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_RRR (0x001c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) #define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) -#endif #define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) #define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) #define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) @@ -79,9 +73,7 @@ #define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) /* Clock enable for SLOW peripherals 16bit (R/W) */ #define U300_SYSCON_CESR (0x0020) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) -#endif #define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) #define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) #define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) @@ -92,24 +84,20 @@ #define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) /* Clock enable for FAST peripherals 16bit (R/W) */ #define U300_SYSCON_CEFR (0x0024) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) -#endif #define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) #define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) #define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) #define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) -#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) -#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) -#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) -#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) +#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) +#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) +#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) +#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) #define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) /* Clock enable for the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_CERR (0x0028) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) #define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) -#endif #define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) #define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) #define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) @@ -124,9 +112,7 @@ #define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) /* Single block clock enable 16bit (-/W) */ #define U300_SYSCON_SBCER (0x002c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) -#endif #define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) #define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) #define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) @@ -135,9 +121,7 @@ #define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) #define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) #define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) -#endif #define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) #define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) #define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) @@ -147,10 +131,8 @@ #define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) #define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) #define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) #define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) -#endif #define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) #define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) #define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) @@ -168,9 +150,7 @@ /* Same values as above for SBCER */ /* Clock force SLOW peripherals 16bit (R/W) */ #define U300_SYSCON_CFSR (0x003c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) -#endif #define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) #define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) #define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) @@ -184,10 +164,8 @@ /* Values not defined. Define if you want to use them. */ /* Clock force the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_CFRR (0x44) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) #define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) -#endif #define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) #define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) #define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 65f87c523892..1e49d901f2c9 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -28,7 +28,6 @@ #define PLAT_NAND_CLE (1 << 16) #define PLAT_NAND_ALE (1 << 17) - /* AHB Peripherals */ #define U300_AHB_PER_PHYS_BASE 0xa0000000 #define U300_AHB_PER_VIRT_BASE 0xff010000 @@ -46,11 +45,7 @@ #define U300_BOOTROM_VIRT_BASE 0xffff0000 /* SEMI config base */ -#ifdef CONFIG_MACH_U300_BS335 #define U300_SEMI_CONFIG_BASE 0x2FFE0000 -#else -#define U300_SEMI_CONFIG_BASE 0x30000000 -#endif /* * AHB peripherals @@ -99,10 +94,8 @@ /* SPI controller */ #define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) -#ifdef CONFIG_MACH_U300_BS335 /* Fast UART1 on U335 only */ #define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) -#endif /* * SLOW peripherals @@ -151,10 +144,8 @@ * REST peripherals */ -/* ISP (image signal processor) is only available in U335 */ -#ifdef CONFIG_MACH_U300_BS335 +/* ISP (image signal processor) */ #define U300_ISP_BASE (0xA0008000) -#endif /* DMA Controller base */ #define U300_DMAC_BASE (0xC0020000) @@ -166,17 +157,9 @@ #define U300_APEX_BASE (0xc0030000) /* Video Encoder Base */ -#ifdef CONFIG_MACH_U300_BS335 #define U300_VIDEOENC_BASE (0xc0080000) -#else -#define U300_VIDEOENC_BASE (0xc0040000) -#endif /* XGAM Base */ #define U300_XGAM_BASE (0xd0000000) -/* - * Virtual accessor macros for static devices - */ - #endif diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index a1affacfa59c..02e6659286d5 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -12,7 +12,7 @@ #include <linux/amba/pl022.h> #include <linux/err.h> #include <mach/coh901318.h> -#include <mach/dma_channels.h> +#include "dma_channels.h" /* * The following is for the actual devices on the SSP/SPI bus diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 56ac06d38ec1..1da10e20e996 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -17,14 +17,17 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> /* Generic stuff */ #include <asm/sched_clock.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/mach/irq.h> + +#include "timer.h" /* * APP side special timer registers diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h new file mode 100644 index 000000000000..b5e9791762e0 --- /dev/null +++ b/arch/arm/mach-u300/timer.h @@ -0,0 +1 @@ +extern struct sys_timer u300_timer; diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h index 847dc25300c6..83f50772e169 100644 --- a/arch/arm/mach-u300/u300-gpio.h +++ b/arch/arm/mach-u300/u300-gpio.h @@ -1,50 +1,11 @@ /* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. + * Individual pin assignments for the B335/S335. * Notice that the actual usage of these pins depends on the * PAD MUX settings, that is why the same number can potentially * appear several times. In the reference design each pin is only * used for one purpose. These were determined by inspecting the * S365 schematic. */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) #define U300_GPIO_PIN_UART_RX 0 #define U300_GPIO_PIN_UART_TX 1 #define U300_GPIO_PIN_UART_CTS 2 @@ -90,8 +51,6 @@ #define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ #define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ -#ifdef CONFIG_MACH_U300_BS335 - #define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ #define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ #define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ @@ -109,6 +68,3 @@ #define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ #define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ #define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c deleted file mode 100644 index f30c69d91d99..000000000000 --- a/arch/arm/mach-u300/u300.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * - * arch/arm/mach-u300/u300.c - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Platform machine definition. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/memblock.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> -#include <asm/hardware/vic.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/memory.h> - -static void __init u300_init_machine(void) -{ - u300_init_devices(); -} - -#ifdef CONFIG_MACH_U300_BS2X -#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS330 -#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS335 -#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS365 -#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board" -#endif - -MACHINE_START(U300, MACH_U300_STRING) - /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .atag_offset = 0x100, - .map_io = u300_map_io, - .init_irq = u300_init_irq, - .handle_irq = vic_handle_irq, - .timer = &u300_timer, - .init_machine = u300_init_machine, - .restart = u300_restart, -MACHINE_END diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index c855e7cd337b..d0d1bd4d0e7d 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -249,20 +249,20 @@ static int nand_dev_ready(struct mtd_info *mtd) int bcm_umi_nand_inithw(void) { /* Configure nand timing parameters */ - REG_UMI_NAND_TCR &= ~0x7ffff; - REG_UMI_NAND_TCR |= HW_CFG_NAND_TCR; + writel(readl(®_UMI_NAND_TCR) & ~0x7ffff, ®_UMI_NAND_TCR); + writel(readl(®_UMI_NAND_TCR) | HW_CFG_NAND_TCR, ®_UMI_NAND_TCR); #if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS) /* enable software control of CS */ - REG_UMI_NAND_TCR |= REG_UMI_NAND_TCR_CS_SWCTRL; + writel(readl(®_UMI_NAND_TCR) | REG_UMI_NAND_TCR_CS_SWCTRL, ®_UMI_NAND_TCR); #endif /* keep NAND chip select asserted */ - REG_UMI_NAND_RCSR |= REG_UMI_NAND_RCSR_CS_ASSERTED; + writel(readl(®_UMI_NAND_RCSR) | REG_UMI_NAND_RCSR_CS_ASSERTED, ®_UMI_NAND_RCSR); - REG_UMI_NAND_TCR &= ~REG_UMI_NAND_TCR_WORD16; + writel(readl(®_UMI_NAND_TCR) & ~REG_UMI_NAND_TCR_WORD16, ®_UMI_NAND_TCR); /* enable writes to flash */ - REG_UMI_MMD_ICR |= REG_UMI_MMD_ICR_FLASH_WP; + writel(readl(®_UMI_MMD_ICR) | REG_UMI_MMD_ICR_FLASH_WP, ®_UMI_MMD_ICR); writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET); nand_bcm_umi_wait_till_ready(); diff --git a/drivers/mtd/nand/nand_bcm_umi.h b/drivers/mtd/nand/nand_bcm_umi.h index 198b304d6f72..d90186684db8 100644 --- a/drivers/mtd/nand/nand_bcm_umi.h +++ b/drivers/mtd/nand/nand_bcm_umi.h @@ -17,7 +17,7 @@ /* ---- Include Files ---------------------------------------------------- */ #include <mach/reg_umi.h> #include <mach/reg_nand.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> /* ---- Constants and Types ---------------------------------------------- */ #if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING) @@ -48,7 +48,7 @@ int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData, /* Check in device is ready */ static inline int nand_bcm_umi_dev_ready(void) { - return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY; + return readl(®_UMI_NAND_RCSR) & REG_UMI_NAND_RCSR_RDY; } /* Wait until device is ready */ @@ -62,10 +62,11 @@ static inline void nand_bcm_umi_wait_till_ready(void) static inline void nand_bcm_umi_hamming_enable_hwecc(void) { /* disable and reset ECC, 512 byte page */ - REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE | - REG_UMI_NAND_ECC_CSR_256BYTE); + writel(readl(®_UMI_NAND_ECC_CSR) & ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE | + REG_UMI_NAND_ECC_CSR_256BYTE), ®_UMI_NAND_ECC_CSR); /* enable ECC */ - REG_UMI_NAND_ECC_CSR |= REG_UMI_NAND_ECC_CSR_ECC_ENABLE; + writel(readl(®_UMI_NAND_ECC_CSR) | REG_UMI_NAND_ECC_CSR_ECC_ENABLE, + ®_UMI_NAND_ECC_CSR); } #if NAND_ECC_BCH @@ -76,18 +77,18 @@ static inline void nand_bcm_umi_hamming_enable_hwecc(void) static inline void nand_bcm_umi_bch_enable_read_hwecc(void) { /* disable and reset ECC */ - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID; + writel(REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID, ®_UMI_BCH_CTRL_STATUS); /* Turn on ECC */ - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN; + writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS); } /* Enable BCH Write ECC */ static inline void nand_bcm_umi_bch_enable_write_hwecc(void) { /* disable and reset ECC */ - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID; + writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID, ®_UMI_BCH_CTRL_STATUS); /* Turn on ECC */ - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN; + writel(REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN, ®_UMI_BCH_CTRL_STATUS); } /* Config number of BCH ECC bytes */ @@ -99,9 +100,9 @@ static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes) uint32_t numBits = numEccBytes * 8; /* disable and reset ECC */ - REG_UMI_BCH_CTRL_STATUS = - REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID | - REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID; + writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID | + REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID, + ®_UMI_BCH_CTRL_STATUS); /* Every correctible bit requires 13 ECC bits */ tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT); @@ -113,23 +114,21 @@ static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes) kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT); /* Write the settings */ - REG_UMI_BCH_N = nValue; - REG_UMI_BCH_T = tValue; - REG_UMI_BCH_K = kValue; + writel(nValue, ®_UMI_BCH_N); + writel(tValue, ®_UMI_BCH_T); + writel(kValue, ®_UMI_BCH_K); } /* Pause during ECC read calculation to skip bytes in OOB */ static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void) { - REG_UMI_BCH_CTRL_STATUS = - REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN | - REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC; + writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN | REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC, ®_UMI_BCH_CTRL_STATUS); } /* Resume during ECC read calculation after skipping bytes in OOB */ static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void) { - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN; + writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS); } /* Poll read ECC calc to check when hardware completes */ @@ -139,7 +138,7 @@ static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void) do { /* wait for ECC to be valid */ - regVal = REG_UMI_BCH_CTRL_STATUS; + regVal = readl(®_UMI_BCH_CTRL_STATUS); } while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0); return regVal; @@ -149,7 +148,7 @@ static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void) static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void) { /* wait for ECC to be valid */ - while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID) + while ((readl(®_UMI_BCH_CTRL_STATUS) & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID) == 0) ; } @@ -170,9 +169,9 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, if (pageSize != NAND_DATA_ACCESS_SIZE) { /* skip BI */ #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp++ = REG_NAND_DATA8; + *oobp++ = readb(®_NAND_DATA8); #else - REG_NAND_DATA8; + readb(®_NAND_DATA8); #endif numToRead--; } @@ -180,9 +179,9 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, while (numToRead > numEccBytes) { /* skip free oob region */ #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp++ = REG_NAND_DATA8; + *oobp++ = readb(®_NAND_DATA8); #else - REG_NAND_DATA8; + readb(®_NAND_DATA8); #endif numToRead--; } @@ -193,11 +192,11 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, while (numToRead > 11) { #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp = REG_NAND_DATA8; + *oobp = readb(®_NAND_DATA8); eccCalc[eccPos++] = *oobp; oobp++; #else - eccCalc[eccPos++] = REG_NAND_DATA8; + eccCalc[eccPos++] = readb(®_NAND_DATA8); #endif numToRead--; } @@ -207,9 +206,9 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, if (numToRead == 11) { /* read BI */ #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp++ = REG_NAND_DATA8; + *oobp++ = readb(®_NAND_DATA8); #else - REG_NAND_DATA8; + readb(®_NAND_DATA8); #endif numToRead--; } @@ -219,11 +218,11 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, nand_bcm_umi_bch_resume_read_ecc_calc(); while (numToRead) { #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp = REG_NAND_DATA8; + *oobp = readb(®_NAND_DATA8); eccCalc[eccPos++] = *oobp; oobp++; #else - eccCalc[eccPos++] = REG_NAND_DATA8; + eccCalc[eccPos++] = readb(®_NAND_DATA8); #endif numToRead--; } @@ -255,7 +254,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, if (pageSize == NAND_DATA_ACCESS_SIZE) { /* Now fill in the ECC bytes */ if (numEccBytes >= 13) - eccVal = REG_UMI_BCH_WR_ECC_3; + eccVal = readl(®_UMI_BCH_WR_ECC_3); /* Usually we skip CM in oob[0,1] */ NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0], @@ -268,7 +267,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, eccVal & 0xff); /* ECC 12 */ if (numEccBytes >= 9) - eccVal = REG_UMI_BCH_WR_ECC_2; + eccVal = readl(®_UMI_BCH_WR_ECC_2); NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3], (eccVal >> 24) & 0xff); /* ECC11 */ @@ -281,7 +280,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, /* Now fill in the ECC bytes */ if (numEccBytes >= 13) - eccVal = REG_UMI_BCH_WR_ECC_3; + eccVal = readl(®_UMI_BCH_WR_ECC_3); /* Usually skip CM in oob[1,2] */ NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1], @@ -294,7 +293,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, eccVal & 0xff); /* ECC12 */ if (numEccBytes >= 9) - eccVal = REG_UMI_BCH_WR_ECC_2; + eccVal = readl(®_UMI_BCH_WR_ECC_2); NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4], (eccVal >> 24) & 0xff); /* ECC11 */ @@ -309,7 +308,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, eccVal & 0xff); /* ECC8 */ if (numEccBytes >= 5) - eccVal = REG_UMI_BCH_WR_ECC_1; + eccVal = readl(®_UMI_BCH_WR_ECC_1); NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8], (eccVal >> 24) & 0xff); /* ECC7 */ @@ -321,7 +320,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, eccVal & 0xff); /* ECC4 */ if (numEccBytes >= 1) - eccVal = REG_UMI_BCH_WR_ECC_0; + eccVal = readl(®_UMI_BCH_WR_ECC_0); NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12], (eccVal >> 24) & 0xff); /* ECC3 */ diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index cc0f00d73d15..b446c9641212 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -1,11 +1,8 @@ /* * U300 GPIO module. * - * Copyright (C) 2007-2011 ST-Ericsson AB + * Copyright (C) 2007-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 - * This can driver either of the two basic GPIO cores - * available in the U300 platforms: - * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) * Author: Linus Walleij <linus.walleij@linaro.org> * Author: Jonas Aaberg <jonas.aberg@stericsson.com> @@ -24,19 +21,22 @@ #include <linux/slab.h> #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> -#include <mach/gpio-u300.h> +#include <linux/platform_data/pinctrl-coh901.h> #include "pinctrl-coh901.h" +#define U300_GPIO_PORT_STRIDE (0x30) /* - * Register definitions for COH 901 335 variant + * Control Register 32bit (R/W) + * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores + * gives the number of GPIO pins. + * bit 8-2 (mask 0x000001FC) contains the core version ID. */ -#define U300_335_PORT_STRIDE (0x1C) -/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ -#define U300_335_PXPDIR (0x00) -#define U300_335_PXPDOR (0x00) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_335_PXPCR (0x04) -/* This register layout is the same in both blocks */ +#define U300_GPIO_CR (0x00) +#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL) +#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) +#define U300_GPIO_PXPDIR (0x04) +#define U300_GPIO_PXPDOR (0x08) +#define U300_GPIO_PXPCR (0x0C) #define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) #define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) #define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) @@ -44,53 +44,17 @@ #define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) #define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) #define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_335_PXIEV (0x08) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_335_PXIEN (0x0C) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_335_PXIFR (0x10) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_335_PXICR (0x14) -/* This register layout is the same in both blocks */ +#define U300_GPIO_PXPER (0x10) +#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) +#define U300_GPIO_PXIEV (0x14) +#define U300_GPIO_PXIEN (0x18) +#define U300_GPIO_PXIFR (0x1C) +#define U300_GPIO_PXICR (0x20) #define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) #define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) #define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) #define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_335_PXPER (0x18) -/* This register layout is the same in both blocks */ -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Control Register 32bit (R/W) */ -#define U300_335_CR (0x54) -#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) - -/* - * Register definitions for COH 901 571 / 3 variant - */ -#define U300_571_PORT_STRIDE (0x30) -/* - * Control Register 32bit (R/W) - * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores - * gives the number of GPIO pins. - * bit 8-2 (mask 0x000001FC) contains the core version ID. - */ -#define U300_571_CR (0x00) -#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL) -#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) -/* - * These registers have the same layout and function as the corresponding - * COH 901 335 registers, just at different offset. - */ -#define U300_571_PXPDIR (0x04) -#define U300_571_PXPDOR (0x08) -#define U300_571_PXPCR (0x0C) -#define U300_571_PXPER (0x10) -#define U300_571_PXIEV (0x14) -#define U300_571_PXIEN (0x18) -#define U300_571_PXIFR (0x1C) -#define U300_571_PXICR (0x20) /* 8 bits per port, no version has more than 7 ports */ #define U300_GPIO_PINS_PER_PORT 8 @@ -149,8 +113,6 @@ struct u300_gpio_confdata { /* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */ #define BS335_GPIO_NUM_PORTS 7 -/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */ -#define BS365_GPIO_NUM_PORTS 5 #define U300_FLOATING_INPUT { \ .bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \ @@ -172,7 +134,6 @@ struct u300_gpio_confdata { .outval = 1, \ } - /* Initial configuration */ static const struct __initconst u300_gpio_confdata bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { @@ -255,66 +216,6 @@ bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { } }; -static const struct __initconst u300_gpio_confdata -bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { - /* Port 0, pins 0-7 */ - { - U300_FLOATING_INPUT, - U300_OUTPUT_LOW, - U300_FLOATING_INPUT, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_PULL_UP_INPUT, - U300_FLOATING_INPUT, - }, - /* Port 1, pins 0-7 */ - { - U300_OUTPUT_LOW, - U300_FLOATING_INPUT, - U300_OUTPUT_LOW, - U300_FLOATING_INPUT, - U300_FLOATING_INPUT, - U300_OUTPUT_HIGH, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - }, - /* Port 2, pins 0-7 */ - { - U300_FLOATING_INPUT, - U300_PULL_UP_INPUT, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - }, - /* Port 3, pins 0-7 */ - { - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - }, - /* Port 4, pins 0-7 */ - { - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - /* These 4 pins doesn't exist on DB3210 */ - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - } -}; - /** * to_u300_gpio() - get the pointer to u300_gpio * @chip: the gpio chip member of the structure u300_gpio @@ -716,13 +617,7 @@ static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio, const struct u300_gpio_confdata *conf; int offset = (i*8) + j; - if (plat->variant == U300_GPIO_COH901571_3_BS335) - conf = &bs335_gpio_config[i][j]; - else if (plat->variant == U300_GPIO_COH901571_3_BS365) - conf = &bs365_gpio_config[i][j]; - else - break; - + conf = &bs335_gpio_config[i][j]; u300_gpio_init_pin(gpio, offset, conf); } } @@ -796,50 +691,27 @@ static int __init u300_gpio_probe(struct platform_device *pdev) goto err_no_ioremap; } - if (plat->variant == U300_GPIO_COH901335) { - dev_info(gpio->dev, - "initializing GPIO Controller COH 901 335\n"); - gpio->stride = U300_335_PORT_STRIDE; - gpio->pcr = U300_335_PXPCR; - gpio->dor = U300_335_PXPDOR; - gpio->dir = U300_335_PXPDIR; - gpio->per = U300_335_PXPER; - gpio->icr = U300_335_PXICR; - gpio->ien = U300_335_PXIEN; - gpio->iev = U300_335_PXIEV; - ifr = U300_335_PXIFR; - - /* Turn on the GPIO block */ - writel(U300_335_CR_BLOCK_CLOCK_ENABLE, - gpio->base + U300_335_CR); - } else if (plat->variant == U300_GPIO_COH901571_3_BS335 || - plat->variant == U300_GPIO_COH901571_3_BS365) { - dev_info(gpio->dev, - "initializing GPIO Controller COH 901 571/3\n"); - gpio->stride = U300_571_PORT_STRIDE; - gpio->pcr = U300_571_PXPCR; - gpio->dor = U300_571_PXPDOR; - gpio->dir = U300_571_PXPDIR; - gpio->per = U300_571_PXPER; - gpio->icr = U300_571_PXICR; - gpio->ien = U300_571_PXIEN; - gpio->iev = U300_571_PXIEV; - ifr = U300_571_PXIFR; - - val = readl(gpio->base + U300_571_CR); - dev_info(gpio->dev, "COH901571/3 block version: %d, " \ - "number of cores: %d totalling %d pins\n", - ((val & 0x000001FC) >> 2), - ((val & 0x0000FE00) >> 9), - ((val & 0x0000FE00) >> 9) * 8); - writel(U300_571_CR_BLOCK_CLKRQ_ENABLE, - gpio->base + U300_571_CR); - u300_gpio_init_coh901571(gpio, plat); - } else { - dev_err(gpio->dev, "unknown block variant\n"); - err = -ENODEV; - goto err_unknown_variant; - } + dev_info(gpio->dev, + "initializing GPIO Controller COH 901 571/3\n"); + gpio->stride = U300_GPIO_PORT_STRIDE; + gpio->pcr = U300_GPIO_PXPCR; + gpio->dor = U300_GPIO_PXPDOR; + gpio->dir = U300_GPIO_PXPDIR; + gpio->per = U300_GPIO_PXPER; + gpio->icr = U300_GPIO_PXICR; + gpio->ien = U300_GPIO_PXIEN; + gpio->iev = U300_GPIO_PXIEV; + ifr = U300_GPIO_PXIFR; + + val = readl(gpio->base + U300_GPIO_CR); + dev_info(gpio->dev, "COH901571/3 block version: %d, " \ + "number of cores: %d totalling %d pins\n", + ((val & 0x000001FC) >> 2), + ((val & 0x0000FE00) >> 9), + ((val & 0x0000FE00) >> 9) * 8); + writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, + gpio->base + U300_GPIO_CR); + u300_gpio_init_coh901571(gpio, plat); /* Add each port with its IRQ separately */ INIT_LIST_HEAD(&gpio->port_list); @@ -906,7 +778,6 @@ err_no_pinctrl: err_no_chip: err_no_port: u300_gpio_free_ports(gpio); -err_unknown_variant: iounmap(gpio->base); err_no_ioremap: release_mem_region(gpio->memres->start, resource_size(gpio->memres)); @@ -923,16 +794,11 @@ err_no_clk: static int __exit u300_gpio_remove(struct platform_device *pdev) { - struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev); struct u300_gpio *gpio = platform_get_drvdata(pdev); int err; /* Turn off the GPIO block */ - if (plat->variant == U300_GPIO_COH901335) - writel(0x00000000U, gpio->base + U300_335_CR); - if (plat->variant == U300_GPIO_COH901571_3_BS335 || - plat->variant == U300_GPIO_COH901571_3_BS365) - writel(0x00000000U, gpio->base + U300_571_CR); + writel(0x00000000U, gpio->base + U300_GPIO_CR); err = gpiochip_remove(&gpio->chip); if (err < 0) { diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/include/linux/platform_data/pinctrl-coh901.h index e81400c1753a..30dea251b835 100644 --- a/arch/arm/mach-u300/include/mach/gpio-u300.h +++ b/include/linux/platform_data/pinctrl-coh901.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007-2011 ST-Ericsson AB + * Copyright (C) 2007-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * GPIO block resgister definitions and inline macros for * U300 GPIO COH 901 335 or COH 901 571/3 @@ -10,24 +10,13 @@ #define __MACH_U300_GPIO_U300_H /** - * enum u300_gpio_variant - the type of U300 GPIO employed - */ -enum u300_gpio_variant { - U300_GPIO_COH901335, - U300_GPIO_COH901571_3_BS335, - U300_GPIO_COH901571_3_BS365, -}; - -/** * struct u300_gpio_platform - U300 GPIO platform data - * @variant: IP block variant * @ports: number of GPIO block ports * @gpio_base: first GPIO number for this block (use a free range) * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) * @pinctrl_device: pin control device to spawn as child */ struct u300_gpio_platform { - enum u300_gpio_variant variant; u8 ports; int gpio_base; int gpio_irq_base; |
