summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/qla2xxx/qla_nx.c36
-rw-r--r--drivers/scsi/qla2xxx/qla_nx.h2
2 files changed, 0 insertions, 38 deletions
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 6ea5e98b850b..22b0d781c75a 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1254,25 +1254,6 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
}
static int
-qla82xx_check_for_bad_spd(struct qla_hw_data *ha)
-{
- u32 val = 0;
- val = qla82xx_rd_32(ha, BOOT_LOADER_DIMM_STATUS);
- val &= QLA82XX_BOOT_LOADER_MN_ISSUE;
- if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) {
- qla_printk(KERN_INFO, ha,
- "Memory DIMM SPD not programmed. "
- " Assumed valid.\n");
- return 1;
- } else if (val) {
- qla_printk(KERN_INFO, ha,
- "Memory DIMM type incorrect.Info:%08X.\n", val);
- return 2;
- }
- return 0;
-}
-
-static int
qla82xx_pci_mem_write_2M(struct qla_hw_data *ha,
u64 off, void *data, int size)
{
@@ -1337,11 +1318,6 @@ qla82xx_pci_mem_write_2M(struct qla_hw_data *ha,
word[startword+1] |= tmpw >> (sz[0] * 8);
}
- /*
- * don't lock here - write_wx gets the lock if each time
- * write_lock_irqsave(&adapter->adapter_lock, flags);
- * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
- */
for (i = 0; i < loop; i++) {
temp = off8 + (i << shift_amount);
qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp);
@@ -1443,12 +1419,6 @@ qla82xx_pci_mem_read_2M(struct qla_hw_data *ha,
off0[1] = 0;
sz[1] = size - sz[0];
- /*
- * don't lock here - write_wx gets the lock if each time
- * write_lock_irqsave(&adapter->adapter_lock, flags);
- * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
- */
-
for (i = 0; i < loop; i++) {
temp = off8 + (i << shift_amount);
qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp);
@@ -1481,11 +1451,6 @@ qla82xx_pci_mem_read_2M(struct qla_hw_data *ha,
}
}
- /*
- * netxen_nic_pci_change_crbwindow_128M(adapter, 1);
- * write_unlock_irqrestore(&adapter->adapter_lock, flags);
- */
-
if (j >= MAX_CTL_CHECK)
return -1;
@@ -1916,7 +1881,6 @@ qla82xx_check_cmdpeg_state(struct qla_hw_data *ha)
qla_printk(KERN_INFO, ha,
"Cmd Peg initialization failed: 0x%x.\n", val);
- qla82xx_check_for_bad_spd(ha);
val = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_PEGTUNE_DONE);
read_lock(&ha->hw_lock);
qla82xx_wr_32(ha, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED);
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 51ec0c5380e8..ed5883f1778a 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -523,8 +523,6 @@
# define QLA82XX_CAM_RAM_BASE (QLA82XX_CRB_CAM + 0x02000)
# define QLA82XX_CAM_RAM(reg) (QLA82XX_CAM_RAM_BASE + (reg))
-#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED 0x80000000
-#define QLA82XX_BOOT_LOADER_MN_ISSUE 0xff00ffff
#define QLA82XX_PORT_MODE_ADDR (QLA82XX_CAM_RAM(0x24))
#define QLA82XX_PEG_HALT_STATUS1 (QLA82XX_CAM_RAM(0xa8))
#define QLA82XX_PEG_HALT_STATUS2 (QLA82XX_CAM_RAM(0xac))
OpenPOWER on IntegriCloud