diff options
| -rw-r--r-- | Documentation/powerpc/booting-without-of.txt | 57 | ||||
| -rw-r--r-- | arch/powerpc/platforms/52xx/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/of/of_i2c.c | 2 | ||||
| -rw-r--r-- | include/asm-powerpc/mpc52xx_psc.h | 40 |
4 files changed, 95 insertions, 6 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index ea1b70b35793..99514ced82c5 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -59,6 +59,7 @@ Table of Contents p) Freescale Synchronous Serial Interface q) USB EHCI controllers r) MDIO on GPIOs + s) SPI busses VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -1883,6 +1884,62 @@ platforms are moved over to use the flattened-device-tree model. &qe_pio_c 6>; }; + s) SPI (Serial Peripheral Interface) busses + + SPI busses can be described with a node for the SPI master device + and a set of child nodes for each SPI slave on the bus. For this + discussion, it is assumed that the system's SPI controller is in + SPI master mode. This binding does not describe SPI controllers + in slave mode. + + The SPI master node requires the following properties: + - #address-cells - number of cells required to define a chip select + address on the SPI bus. + - #size-cells - should be zero. + - compatible - name of SPI bus controller following generic names + recommended practice. + No other properties are required in the SPI bus node. It is assumed + that a driver for an SPI bus device will understand that it is an SPI bus. + However, the binding does not attempt to define the specific method for + assigning chip select numbers. Since SPI chip select configuration is + flexible and non-standardized, it is left out of this binding with the + assumption that board specific platform code will be used to manage + chip selects. Individual drivers can define additional properties to + support describing the chip select layout. + + SPI slave nodes must be children of the SPI master node and can + contain the following properties. + - reg - (required) chip select address of device. + - compatible - (required) name of SPI device following generic names + recommended practice + - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz + - spi-cpol - (optional) Empty property indicating device requires + inverse clock polarity (CPOL) mode + - spi-cpha - (optional) Empty property indicating device requires + shifted clock phase (CPHA) mode + + SPI example for an MPC5200 SPI bus: + spi@f00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + interrupt-parent = <&mpc5200_pic>; + + ethernet-switch@0 { + compatible = "micrel,ks8995m"; + spi-max-frequency = <1000000>; + reg = <0>; + }; + + codec@1 { + compatible = "ti,tlv320aic26"; + spi-max-frequency = <100000>; + reg = <1>; + }; + }; + VII - Marvell Discovery mv64[345]6x System Controller chips =========================================================== diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index d664b1bce381..9a51675beb80 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -1,7 +1,6 @@ config PPC_MPC52xx bool "52xx-based boards" depends on PPC_MULTIPLATFORM && PPC32 - select FSL_SOC select PPC_CLOCK select PPC_PCI_CHOICE @@ -48,6 +47,7 @@ config PPC_MPC5200_BUGFIX config PPC_MPC5200_GPIO bool "MPC5200 GPIO support" depends on PPC_MPC52xx + select GENERIC_GPIO select HAVE_GPIO_LIB help Enable gpiolib support for mpc5200 based boards diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index 5c015d310d4a..344e1b03dd8b 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -91,8 +91,6 @@ void of_register_i2c_devices(struct i2c_adapter *adap, } info.irq = irq_of_parse_and_map(node, 0); - if (info.irq == NO_IRQ) - info.irq = -1; if (of_find_i2c_driver(node, &info) < 0) { irq_dispose_mapping(info.irq); diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h index 710c5d36efaa..8917ed630565 100644 --- a/include/asm-powerpc/mpc52xx_psc.h +++ b/include/asm-powerpc/mpc52xx_psc.h @@ -60,10 +60,12 @@ #define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002 #define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001 -/* PSC interrupt mask bits */ +/* PSC interrupt status/mask bits */ #define MPC52xx_PSC_IMR_TXRDY 0x0100 #define MPC52xx_PSC_IMR_RXRDY 0x0200 #define MPC52xx_PSC_IMR_DB 0x0400 +#define MPC52xx_PSC_IMR_TXEMP 0x0800 +#define MPC52xx_PSC_IMR_ORERR 0x1000 #define MPC52xx_PSC_IMR_IPC 0x8000 /* PSC input port change bit */ @@ -92,6 +94,34 @@ #define MPC52xx_PSC_RFNUM_MASK 0x01ff +#define MPC52xx_PSC_SICR_DTS1 (1 << 29) +#define MPC52xx_PSC_SICR_SHDR (1 << 28) +#define MPC52xx_PSC_SICR_SIM_MASK (0xf << 24) +#define MPC52xx_PSC_SICR_SIM_UART (0x0 << 24) +#define MPC52xx_PSC_SICR_SIM_UART_DCD (0x8 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_8 (0x1 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_16 (0x2 << 24) +#define MPC52xx_PSC_SICR_SIM_AC97 (0x3 << 24) +#define MPC52xx_PSC_SICR_SIM_SIR (0x8 << 24) +#define MPC52xx_PSC_SICR_SIM_SIR_DCD (0xc << 24) +#define MPC52xx_PSC_SICR_SIM_MIR (0x5 << 24) +#define MPC52xx_PSC_SICR_SIM_FIR (0x6 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_24 (0x7 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_32 (0xf << 24) +#define MPC52xx_PSC_SICR_GENCLK (1 << 23) +#define MPC52xx_PSC_SICR_I2S (1 << 22) +#define MPC52xx_PSC_SICR_CLKPOL (1 << 21) +#define MPC52xx_PSC_SICR_SYNCPOL (1 << 20) +#define MPC52xx_PSC_SICR_CELLSLAVE (1 << 19) +#define MPC52xx_PSC_SICR_CELL2XCLK (1 << 18) +#define MPC52xx_PSC_SICR_ESAI (1 << 17) +#define MPC52xx_PSC_SICR_ENAC97 (1 << 16) +#define MPC52xx_PSC_SICR_SPI (1 << 15) +#define MPC52xx_PSC_SICR_MSTR (1 << 14) +#define MPC52xx_PSC_SICR_CPOL (1 << 13) +#define MPC52xx_PSC_SICR_CPHA (1 << 12) +#define MPC52xx_PSC_SICR_USEEOF (1 << 11) +#define MPC52xx_PSC_SICR_DISABLEEOF (1 << 10) /* Structure of the hardware registers */ struct mpc52xx_psc { @@ -132,8 +162,12 @@ struct mpc52xx_psc { u8 reserved5[3]; u8 ctlr; /* PSC + 0x1c */ u8 reserved6[3]; - u16 ccr; /* PSC + 0x20 */ - u8 reserved7[14]; + /* BitClkDiv field of CCR is byte swapped in + * the hardware for mpc5200/b compatibility */ + u32 ccr; /* PSC + 0x20 */ + u32 ac97_slots; /* PSC + 0x24 */ + u32 ac97_cmd; /* PSC + 0x28 */ + u32 ac97_data; /* PSC + 0x2c */ u8 ivr; /* PSC + 0x30 */ u8 reserved8[3]; u8 ip; /* PSC + 0x34 */ |
