summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-clps711x/autcpu12.c15
-rw-r--r--arch/arm/mach-clps711x/cdb89712.c4
-rw-r--r--arch/arm/mach-clps711x/common.c2
-rw-r--r--arch/arm/mach-clps711x/edb7211-mm.c16
-rw-r--r--arch/arm/mach-clps711x/include/mach/autcpu12.h14
-rw-r--r--arch/arm/mach-clps711x/include/mach/hardware.h56
-rw-r--r--arch/arm/mach-clps711x/include/mach/syspld.h9
-rw-r--r--arch/arm/mach-clps711x/p720t.c16
8 files changed, 38 insertions, 94 deletions
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 32871918bb6e..214547b5c51f 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -39,19 +39,10 @@
#include "common.h"
-/*
- * The on-chip registers are given a size of 1MB so that a section can
- * be used to map them; this saves a page table. This is the place to
- * add mappings for ROM, expansion memory, PCMCIA, etc. (if static
- * mappings are chosen for those areas).
- *
-*/
-
static struct map_desc autcpu12_io_desc[] __initdata = {
- /* memory-mapped extra io and CS8900A Ethernet chip */
- /* ethernet chip */
- {
- .virtual = AUTCPU12_VIRT_CS8900A,
+ /* Memory-mapped extra io and CS8900A Ethernet chip */
+ {
+ .virtual = IO_ADDRESS(AUTCPU12_PHYS_CS8900A),
.pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
.length = SZ_1M,
.type = MT_DEVICE
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index c314f49d6ef6..d90d25c67ac2 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -40,8 +40,8 @@
*/
static struct map_desc cdb89712_io_desc[] __initdata = {
{
- .virtual = ETHER_BASE,
- .pfn =__phys_to_pfn(ETHER_START),
+ .virtual = IO_ADDRESS(ETHER_PHYS_BASE),
+ .pfn = __phys_to_pfn(ETHER_PHYS_BASE),
.length = ETHER_SIZE,
.type = MT_DEVICE
}
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 47fb496ceae7..286d6e6d5f5a 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -45,7 +45,7 @@ static struct map_desc clps711x_io_desc[] __initdata = {
{
.virtual = (unsigned long)CLPS711X_VIRT_BASE,
.pfn = __phys_to_pfn(CLPS711X_PHYS_BASE),
- .length = SZ_1M,
+ .length = SZ_64K,
.type = MT_DEVICE
}
};
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 4372f06c9929..054eaa05f5c8 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -51,23 +51,23 @@ extern void clps711x_map_io(void);
* happens).
*/
static struct map_desc edb7211_io_desc[] __initdata = {
- { /* memory-mapped extra keyboard row */
- .virtual = EP7211_VIRT_EXTKBD,
+ { /* Memory-mapped extra keyboard row */
+ .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD),
.pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD),
.length = SZ_1M,
.type = MT_DEVICE,
- }, { /* and CS8900A Ethernet chip */
- .virtual = EP7211_VIRT_CS8900A,
+ }, { /* CS8900A Ethernet chip */
+ .virtual = IO_ADDRESS(EP7211_PHYS_CS8900A),
.pfn = __phys_to_pfn(EP7211_PHYS_CS8900A),
.length = SZ_1M,
.type = MT_DEVICE,
- }, { /* flash banks */
- .virtual = EP7211_VIRT_FLASH1,
+ }, { /* Flash bank 0 */
+ .virtual = IO_ADDRESS(EP7211_PHYS_FLASH1),
.pfn = __phys_to_pfn(EP7211_PHYS_FLASH1),
.length = SZ_8M,
.type = MT_DEVICE,
- }, {
- .virtual = EP7211_VIRT_FLASH2,
+ }, { /* Flash bank 1 */
+ .virtual = IO_ADDRESS(EP7211_PHYS_FLASH2),
.pfn = __phys_to_pfn(EP7211_PHYS_FLASH2),
.length = SZ_8M,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
index 1588a365f610..f95ce6f29119 100644
--- a/arch/arm/mach-clps711x/include/mach/autcpu12.h
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
@@ -20,12 +20,8 @@
#ifndef __ASM_ARCH_AUTCPU12_H
#define __ASM_ARCH_AUTCPU12_H
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2
- * (nCS2). This is the mapping for it.
- */
-#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* physical */
-#define AUTCPU12_VIRT_CS8900A (0xfe000000) /* virtual */
+/* The CS8900A ethernet chip has its I/O registers wired to chip select 2 */
+#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE
/*
* The flash bank is wired to chip select 0
@@ -34,11 +30,9 @@
/* offset for device specific information structure */
#define AUTCPU12_LCDINFO_OFFS (0x00010000)
-/*
-* Videomemory is the internal SRAM (CS 6)
-*/
+
+/* Videomemory in the internal SRAM (CS 6) */
#define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE
-#define AUTCPU12_VIRT_VIDEO (0xfd000000)
/*
* All special IO's are tied to CS1
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 8497775d6ee5..0a3df25ffea7 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -24,7 +24,10 @@
#include <mach/clps711x.h>
-#define CLPS711X_VIRT_BASE IOMEM(0xff000000)
+#define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \
+ (((x) >> 2) & 0x3c000000)))
+
+#define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE))
#ifndef __ASSEMBLY__
#define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off))
@@ -61,58 +64,25 @@
#define CS7_PHYS_BASE (0x00000000)
#endif
-#define SYSPLD_VIRT_BASE 0xfe000000
-#define SYSPLD_BASE SYSPLD_VIRT_BASE
-
#if defined (CONFIG_ARCH_CDB89712)
-#define ETHER_START 0x20000000
-#define ETHER_SIZE 0x1000
-#define ETHER_BASE 0xfe000000
+#define ETHER_PHYS_BASE CS2_PHYS_BASE
+#define ETHER_SIZE 0x1000
#endif
#if defined (CONFIG_ARCH_EDB7211)
-/*
- * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3)
- * and repeat across it. This is the mapping for it.
- *
- * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */
-
-#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */
-
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2
- * (nCS2). This is the mapping for it.
- *
- * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */
-
-#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */
+/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */
+#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE
+/* The CS8900A ethernet chip has its I/O registers wired to chip select 2 */
+#define EP7211_PHYS_CS8900A CS2_PHYS_BASE
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */
-#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */
-
-#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */
-#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */
+/* The two flash banks are wired to chip selects 0 and 1 */
+#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE
+#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE
#endif /* CONFIG_ARCH_EDB7211 */
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
index f7f4c1201898..9a433155bf58 100644
--- a/arch/arm/mach-clps711x/include/mach/syspld.h
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -23,14 +23,9 @@
#define __ASM_ARCH_SYSPLD_H
#define SYSPLD_PHYS_BASE (0x10000000)
+#define SYSPLD_VIRT_BASE IO_ADDRESS(SYSPLD_PHYS_BASE)
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off))
-#else
-#define SYSPLD_REG(type,off) (off)
-#endif
+#define SYSPLD_REG(type, off) (*(volatile type *)(SYSPLD_VIRT_BASE + (off)))
#define PLD_INT SYSPLD_REG(u32, 0x000000)
#define PLD_INT_PENIRQ (1 << 5)
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 7680beab4ed2..dd8995027dd4 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -39,22 +39,16 @@
#include "common.h"
/*
- * Map the P720T system PLD. It occupies two address spaces:
- * SYSPLD_PHYS_BASE and SYSPLD_PHYS_BASE + 0x00400000
- * We map both here.
+ * Map the P720T system PLD. It occupies two address spaces:
+ * 0x10000000 and 0x10400000. We map both regions as one.
*/
static struct map_desc p720t_io_desc[] __initdata = {
{
.virtual = SYSPLD_VIRT_BASE,
.pfn = __phys_to_pfn(SYSPLD_PHYS_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE
- }, {
- .virtual = 0xfe400000,
- .pfn = __phys_to_pfn(0x10400000),
- .length = SZ_1M,
- .type = MT_DEVICE
- }
+ .length = SZ_8M,
+ .type = MT_DEVICE,
+ },
};
static void __init
OpenPOWER on IntegriCloud