summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/include/asm/opal.h8
-rw-r--r--arch/powerpc/platforms/powernv/pci-ioda.c301
-rw-r--r--arch/powerpc/platforms/powernv/pci.h20
3 files changed, 307 insertions, 22 deletions
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 9d14aaba91e2..44e5083bf01a 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -340,6 +340,12 @@ enum OpalMveEnableAction {
OPAL_ENABLE_MVE = 1
};
+enum OpalM64EnableAction {
+ OPAL_DISABLE_M64 = 0,
+ OPAL_ENABLE_M64_SPLIT = 1,
+ OPAL_ENABLE_M64_NON_SPLIT = 2
+};
+
enum OpalPciResetScope {
OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
@@ -768,7 +774,7 @@ int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type,
uint16_t window_num,
uint64_t starting_real_address,
uint64_t starting_pci_address,
- uint16_t segment_size);
+ uint64_t size);
int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number,
uint16_t window_type, uint16_t window_num,
uint16_t segment_num);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 0701f90ac625..899fe4049b44 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -36,6 +36,7 @@
#include <asm/tce.h>
#include <asm/xics.h>
#include <asm/debug.h>
+#include <asm/firmware.h>
#include "powernv.h"
#include "pci.h"
@@ -82,6 +83,12 @@ static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
: : "r" (val), "r" (paddr) : "memory");
}
+static inline bool pnv_pci_is_mem_pref_64(unsigned long flags)
+{
+ return ((flags & (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH)) ==
+ (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH));
+}
+
static int pnv_ioda_alloc_pe(struct pnv_phb *phb)
{
unsigned long pe;
@@ -106,6 +113,240 @@ static void pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
clear_bit(pe, phb->ioda.pe_alloc);
}
+/* The default M64 BAR is shared by all PEs */
+static int pnv_ioda2_init_m64(struct pnv_phb *phb)
+{
+ const char *desc;
+ struct resource *r;
+ s64 rc;
+
+ /* Configure the default M64 BAR */
+ rc = opal_pci_set_phb_mem_window(phb->opal_id,
+ OPAL_M64_WINDOW_TYPE,
+ phb->ioda.m64_bar_idx,
+ phb->ioda.m64_base,
+ 0, /* unused */
+ phb->ioda.m64_size);
+ if (rc != OPAL_SUCCESS) {
+ desc = "configuring";
+ goto fail;
+ }
+
+ /* Enable the default M64 BAR */
+ rc = opal_pci_phb_mmio_enable(phb->opal_id,
+ OPAL_M64_WINDOW_TYPE,
+ phb->ioda.m64_bar_idx,
+ OPAL_ENABLE_M64_SPLIT);
+ if (rc != OPAL_SUCCESS) {
+ desc = "enabling";
+ goto fail;
+ }
+
+ /* Mark the M64 BAR assigned */
+ set_bit(phb->ioda.m64_bar_idx, &phb->ioda.m64_bar_alloc);
+
+ /*
+ * Strip off the segment used by the reserved PE, which is
+ * expected to be 0 or last one of PE capabicity.
+ */
+ r = &phb->hose->mem_resources[1];
+ if (phb->ioda.reserved_pe == 0)
+ r->start += phb->ioda.m64_segsize;
+ else if (phb->ioda.reserved_pe == (phb->ioda.total_pe - 1))
+ r->end -= phb->ioda.m64_segsize;
+ else
+ pr_warn(" Cannot strip M64 segment for reserved PE#%d\n",
+ phb->ioda.reserved_pe);
+
+ return 0;
+
+fail:
+ pr_warn(" Failure %lld %s M64 BAR#%d\n",
+ rc, desc, phb->ioda.m64_bar_idx);
+ opal_pci_phb_mmio_enable(phb->opal_id,
+ OPAL_M64_WINDOW_TYPE,
+ phb->ioda.m64_bar_idx,
+ OPAL_DISABLE_M64);
+ return -EIO;
+}
+
+static void pnv_ioda2_alloc_m64_pe(struct pnv_phb *phb)
+{
+ resource_size_t sgsz = phb->ioda.m64_segsize;
+ struct pci_dev *pdev;
+ struct resource *r;
+ int base, step, i;
+
+ /*
+ * Root bus always has full M64 range and root port has
+ * M64 range used in reality. So we're checking root port
+ * instead of root bus.
+ */
+ list_for_each_entry(pdev, &phb->hose->bus->devices, bus_list) {
+ for (i = PCI_BRIDGE_RESOURCES;
+ i <= PCI_BRIDGE_RESOURCE_END; i++) {
+ r = &pdev->resource[i];
+ if (!r->parent ||
+ !pnv_pci_is_mem_pref_64(r->flags))
+ continue;
+
+ base = (r->start - phb->ioda.m64_base) / sgsz;
+ for (step = 0; step < resource_size(r) / sgsz; step++)
+ set_bit(base + step, phb->ioda.pe_alloc);
+ }
+ }
+}
+
+static int pnv_ioda2_pick_m64_pe(struct pnv_phb *phb,
+ struct pci_bus *bus, int all)
+{
+ resource_size_t segsz = phb->ioda.m64_segsize;
+ struct pci_dev *pdev;
+ struct resource *r;
+ struct pnv_ioda_pe *master_pe, *pe;
+ unsigned long size, *pe_alloc;
+ bool found;
+ int start, i, j;
+
+ /* Root bus shouldn't use M64 */
+ if (pci_is_root_bus(bus))
+ return IODA_INVALID_PE;
+
+ /* We support only one M64 window on each bus */
+ found = false;
+ pci_bus_for_each_resource(bus, r, i) {
+ if (r && r->parent &&
+ pnv_pci_is_mem_pref_64(r->flags)) {
+ found = true;
+ break;
+ }
+ }
+
+ /* No M64 window found ? */
+ if (!found)
+ return IODA_INVALID_PE;
+
+ /* Allocate bitmap */
+ size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
+ pe_alloc = kzalloc(size, GFP_KERNEL);
+ if (!pe_alloc) {
+ pr_warn("%s: Out of memory !\n",
+ __func__);
+ return IODA_INVALID_PE;
+ }
+
+ /*
+ * Figure out reserved PE numbers by the PE
+ * the its child PEs.
+ */
+ start = (r->start - phb->ioda.m64_base) / segsz;
+ for (i = 0; i < resource_size(r) / segsz; i++)
+ set_bit(start + i, pe_alloc);
+
+ if (all)
+ goto done;
+
+ /*
+ * If the PE doesn't cover all subordinate buses,
+ * we need subtract from reserved PEs for children.
+ */
+ list_for_each_entry(pdev, &bus->devices, bus_list) {
+ if (!pdev->subordinate)
+ continue;
+
+ pci_bus_for_each_resource(pdev->subordinate, r, i) {
+ if (!r || !r->parent ||
+ !pnv_pci_is_mem_pref_64(r->flags))
+ continue;
+
+ start = (r->start - phb->ioda.m64_base) / segsz;
+ for (j = 0; j < resource_size(r) / segsz ; j++)
+ clear_bit(start + j, pe_alloc);
+ }
+ }
+
+ /*
+ * the current bus might not own M64 window and that's all
+ * contributed by its child buses. For the case, we needn't
+ * pick M64 dependent PE#.
+ */
+ if (bitmap_empty(pe_alloc, phb->ioda.total_pe)) {
+ kfree(pe_alloc);
+ return IODA_INVALID_PE;
+ }
+
+ /*
+ * Figure out the master PE and put all slave PEs to master
+ * PE's list to form compound PE.
+ */
+done:
+ master_pe = NULL;
+ i = -1;
+ while ((i = find_next_bit(pe_alloc, phb->ioda.total_pe, i + 1)) <
+ phb->ioda.total_pe) {
+ pe = &phb->ioda.pe_array[i];
+ pe->phb = phb;
+ pe->pe_number = i;
+
+ if (!master_pe) {
+ pe->flags |= PNV_IODA_PE_MASTER;
+ INIT_LIST_HEAD(&pe->slaves);
+ master_pe = pe;
+ } else {
+ pe->flags |= PNV_IODA_PE_SLAVE;
+ pe->master = master_pe;
+ list_add_tail(&pe->list, &master_pe->slaves);
+ }
+ }
+
+ kfree(pe_alloc);
+ return master_pe->pe_number;
+}
+
+static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
+{
+ struct pci_controller *hose = phb->hose;
+ struct device_node *dn = hose->dn;
+ struct resource *res;
+ const u32 *r;
+ u64 pci_addr;
+
+ if (!firmware_has_feature(FW_FEATURE_OPALv3)) {
+ pr_info(" Firmware too old to support M64 window\n");
+ return;
+ }
+
+ r = of_get_property(dn, "ibm,opal-m64-window", NULL);
+ if (!r) {
+ pr_info(" No <ibm,opal-m64-window> on %s\n",
+ dn->full_name);
+ return;
+ }
+
+ /* FIXME: Support M64 for P7IOC */
+ if (phb->type != PNV_PHB_IODA2) {
+ pr_info(" Not support M64 window\n");
+ return;
+ }
+
+ res = &hose->mem_resources[1];
+ res->start = of_translate_address(dn, r + 2);
+ res->end = res->start + of_read_number(r + 4, 2) - 1;
+ res->flags = (IORESOURCE_MEM | IORESOURCE_MEM_64 | IORESOURCE_PREFETCH);
+ pci_addr = of_read_number(r, 2);
+ hose->mem_offset[1] = res->start - pci_addr;
+
+ phb->ioda.m64_size = resource_size(res);
+ phb->ioda.m64_segsize = phb->ioda.m64_size / phb->ioda.total_pe;
+ phb->ioda.m64_base = pci_addr;
+
+ /* Use last M64 BAR to cover M64 window */
+ phb->ioda.m64_bar_idx = 15;
+ phb->init_m64 = pnv_ioda2_init_m64;
+ phb->alloc_m64_pe = pnv_ioda2_alloc_m64_pe;
+ phb->pick_m64_pe = pnv_ioda2_pick_m64_pe;
+}
+
/* Currently those 2 are only used when MSIs are enabled, this will change
* but in the meantime, we need to protect them to avoid warnings
*/
@@ -363,9 +604,16 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
struct pci_controller *hose = pci_bus_to_host(bus);
struct pnv_phb *phb = hose->private_data;
struct pnv_ioda_pe *pe;
- int pe_num;
+ int pe_num = IODA_INVALID_PE;
+
+ /* Check if PE is determined by M64 */
+ if (phb->pick_m64_pe)
+ pe_num = phb->pick_m64_pe(phb, bus, all);
+
+ /* The PE number isn't pinned by M64 */
+ if (pe_num == IODA_INVALID_PE)
+ pe_num = pnv_ioda_alloc_pe(phb);
- pe_num = pnv_ioda_alloc_pe(phb);
if (pe_num == IODA_INVALID_PE) {
pr_warning("%s: Not enough PE# available for PCI bus %04x:%02x\n",
__func__, pci_domain_nr(bus), bus->number);
@@ -373,7 +621,7 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
}
pe = &phb->ioda.pe_array[pe_num];
- pe->flags = (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS);
+ pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS);
pe->pbus = bus;
pe->pdev = NULL;
pe->tce32_seg = -1;
@@ -441,8 +689,15 @@ static void pnv_ioda_setup_PEs(struct pci_bus *bus)
static void pnv_pci_ioda_setup_PEs(void)
{
struct pci_controller *hose, *tmp;
+ struct pnv_phb *phb;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ phb = hose->private_data;
+
+ /* M64 layout might affect PE allocation */
+ if (phb->alloc_m64_pe)
+ phb->alloc_m64_pe(phb);
+
pnv_ioda_setup_PEs(hose->bus);
}
}
@@ -1071,9 +1326,6 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
index++;
}
} else if (res->flags & IORESOURCE_MEM) {
- /* WARNING: Assumes M32 is mem region 0 in PHB. We need to
- * harden that algorithm when we start supporting M64
- */
region.start = res->start -
hose->mem_offset[0] -
phb->ioda.m32_pci_base;
@@ -1193,7 +1445,10 @@ static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus,
bridge = bridge->bus->self;
}
- /* We need support prefetchable memory window later */
+ /* We fail back to M32 if M64 isn't supported */
+ if (phb->ioda.m64_segsize &&
+ pnv_pci_is_mem_pref_64(type))
+ return phb->ioda.m64_segsize;
if (type & IORESOURCE_MEM)
return phb->ioda.m32_segsize;
@@ -1314,6 +1569,10 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
prop32 = of_get_property(np, "ibm,opal-reserved-pe", NULL);
if (prop32)
phb->ioda.reserved_pe = be32_to_cpup(prop32);
+
+ /* Parse 64-bit MMIO range */
+ pnv_ioda_parse_m64_window(phb);
+
phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
/* FW Has already off top 64k of M32 space (MSI space) */
phb->ioda.m32_size += 0x10000;
@@ -1349,14 +1608,6 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
/* Calculate how many 32-bit TCE segments we have */
phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
- /* Clear unusable m64 */
- hose->mem_resources[1].flags = 0;
- hose->mem_resources[1].start = 0;
- hose->mem_resources[1].end = 0;
- hose->mem_resources[2].flags = 0;
- hose->mem_resources[2].start = 0;
- hose->mem_resources[2].end = 0;
-
#if 0 /* We should really do that ... */
rc = opal_pci_set_phb_mem_window(opal->phb_id,
window_type,
@@ -1366,12 +1617,16 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
segment_size);
#endif
- pr_info(" %d (%d) PE's M32: 0x%x [segment=0x%x]"
- " IO: 0x%x [segment=0x%x]\n",
- phb->ioda.total_pe,
- phb->ioda.reserved_pe,
- phb->ioda.m32_size, phb->ioda.m32_segsize,
- phb->ioda.io_size, phb->ioda.io_segsize);
+ pr_info(" %03d (%03d) PE's M32: 0x%x [segment=0x%x]\n",
+ phb->ioda.total_pe, phb->ioda.reserved_pe,
+ phb->ioda.m32_size, phb->ioda.m32_segsize);
+ if (phb->ioda.m64_size)
+ pr_info(" M64: 0x%lx [segment=0x%lx]\n",
+ phb->ioda.m64_size, phb->ioda.m64_segsize);
+ if (phb->ioda.io_size)
+ pr_info(" IO: 0x%x [segment=0x%x]\n",
+ phb->ioda.io_size, phb->ioda.io_segsize);
+
phb->hose->ops = &pnv_pci_ops;
#ifdef CONFIG_EEH
@@ -1419,6 +1674,10 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
ioda_eeh_phb_reset(hose, OPAL_DEASSERT_RESET);
}
+
+ /* Configure M64 window */
+ if (phb->init_m64 && phb->init_m64(phb))
+ hose->mem_resources[1].flags = 0;
}
void __init pnv_pci_init_ioda2_phb(struct device_node *np)
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 6f5ff6921dab..49da9f154950 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -21,6 +21,8 @@ enum pnv_phb_model {
#define PNV_IODA_PE_DEV (1 << 0) /* PE has single PCI device */
#define PNV_IODA_PE_BUS (1 << 1) /* PE has primary PCI bus */
#define PNV_IODA_PE_BUS_ALL (1 << 2) /* PE has subordinate buses */
+#define PNV_IODA_PE_MASTER (1 << 3) /* Master PE in compound case */
+#define PNV_IODA_PE_SLAVE (1 << 4) /* Slave PE in compound case */
/* Data associated with a PE, including IOMMU tracking etc.. */
struct pnv_phb;
@@ -64,6 +66,10 @@ struct pnv_ioda_pe {
*/
int mve_number;
+ /* PEs in compound case */
+ struct pnv_ioda_pe *master;
+ struct list_head slaves;
+
/* Link in list of PE#s */
struct list_head dma_link;
struct list_head list;
@@ -119,6 +125,9 @@ struct pnv_phb {
void (*fixup_phb)(struct pci_controller *hose);
u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
void (*shutdown)(struct pnv_phb *phb);
+ int (*init_m64)(struct pnv_phb *phb);
+ void (*alloc_m64_pe)(struct pnv_phb *phb);
+ int (*pick_m64_pe)(struct pnv_phb *phb, struct pci_bus *bus, int all);
union {
struct {
@@ -129,9 +138,20 @@ struct pnv_phb {
/* Global bridge info */
unsigned int total_pe;
unsigned int reserved_pe;
+
+ /* 32-bit MMIO window */
unsigned int m32_size;
unsigned int m32_segsize;
unsigned int m32_pci_base;
+
+ /* 64-bit MMIO window */
+ unsigned int m64_bar_idx;
+ unsigned long m64_size;
+ unsigned long m64_segsize;
+ unsigned long m64_base;
+ unsigned long m64_bar_alloc;
+
+ /* IO ports */
unsigned int io_size;
unsigned int io_segsize;
unsigned int io_pci_base;
OpenPOWER on IntegriCloud