diff options
| -rw-r--r-- | Documentation/thermal/exynos_thermal_emulation | 53 | ||||
| -rw-r--r-- | drivers/thermal/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/thermal/exynos_thermal.c | 103 |
3 files changed, 165 insertions, 0 deletions
diff --git a/Documentation/thermal/exynos_thermal_emulation b/Documentation/thermal/exynos_thermal_emulation new file mode 100644 index 000000000000..b73bbfb697bb --- /dev/null +++ b/Documentation/thermal/exynos_thermal_emulation @@ -0,0 +1,53 @@ +EXYNOS EMULATION MODE +======================== + +Copyright (C) 2012 Samsung Electronics + +Written by Jonghwa Lee <jonghwa3.lee@samsung.com> + +Description +----------- + +Exynos 4x12 (4212, 4412) and 5 series provide emulation mode for thermal management unit. +Thermal emulation mode supports software debug for TMU's operation. User can set temperature +manually with software code and TMU will read current temperature from user value not from +sensor's value. + +Enabling CONFIG_EXYNOS_THERMAL_EMUL option will make this support in available. +When it's enabled, sysfs node will be created under +/sys/bus/platform/devices/'exynos device name'/ with name of 'emulation'. + +The sysfs node, 'emulation', will contain value 0 for the initial state. When you input any +temperature you want to update to sysfs node, it automatically enable emulation mode and +current temperature will be changed into it. +(Exynos also supports user changable delay time which would be used to delay of + changing temperature. However, this node only uses same delay of real sensing time, 938us.) + +Exynos emulation mode requires synchronous of value changing and enabling. It means when you +want to update the any value of delay or next temperature, then you have to enable emulation +mode at the same time. (Or you have to keep the mode enabling.) If you don't, it fails to +change the value to updated one and just use last succeessful value repeatedly. That's why +this node gives users the right to change termerpature only. Just one interface makes it more +simply to use. + +Disabling emulation mode only requires writing value 0 to sysfs node. + + +TEMP 120 | + | + 100 | + | + 80 | + | +----------- + 60 | | | + | +-------------| | + 40 | | | | + | | | | + 20 | | | +---------- + | | | | | + 0 |______________|_____________|__________|__________|_________ + A A A A TIME + |<----->| |<----->| |<----->| | + | 938us | | | | | | +emulation : 0 50 | 70 | 20 | 0 +current temp : sensor 50 70 20 sensor diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index c2c77d1ac499..c31b9e4451a3 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -101,6 +101,15 @@ config EXYNOS_THERMAL If you say yes here you get support for TMU (Thermal Management Unit) on SAMSUNG EXYNOS series of SoC. +config EXYNOS_THERMAL_EMUL + bool "EXYNOS TMU emulation mode support" + depends on EXYNOS_THERMAL + help + Exynos 4412 and 4414 and 5 series has emulation mode on TMU. + Enable this option will be make sysfs node in exynos thermal platform + device directory to support emulation mode. With emulation mode sysfs + node, you can manually input temperature to TMU for simulation purpose. + config DB8500_THERMAL bool "DB8500 thermal management" depends on ARCH_U8500 diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index 7772d1603769..e2ef8a3531ac 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -99,6 +99,14 @@ #define IDLE_INTERVAL 10000 #define MCELSIUS 1000 +#ifdef CONFIG_EXYNOS_THERMAL_EMUL +#define EXYNOS_EMUL_TIME 0x57F0 +#define EXYNOS_EMUL_TIME_SHIFT 16 +#define EXYNOS_EMUL_DATA_SHIFT 8 +#define EXYNOS_EMUL_DATA_MASK 0xFF +#define EXYNOS_EMUL_ENABLE 0x1 +#endif /* CONFIG_EXYNOS_THERMAL_EMUL */ + /* CPU Zone information */ #define PANIC_ZONE 4 #define WARN_ZONE 3 @@ -832,6 +840,94 @@ static inline struct exynos_tmu_platform_data *exynos_get_driver_data( return (struct exynos_tmu_platform_data *) platform_get_device_id(pdev)->driver_data; } + +#ifdef CONFIG_EXYNOS_THERMAL_EMUL +static ssize_t exynos_tmu_emulation_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + unsigned int reg; + u8 temp_code; + int temp = 0; + + if (data->soc == SOC_ARCH_EXYNOS4210) + goto out; + + mutex_lock(&data->lock); + clk_enable(data->clk); + reg = readl(data->base + EXYNOS_EMUL_CON); + clk_disable(data->clk); + mutex_unlock(&data->lock); + + if (reg & EXYNOS_EMUL_ENABLE) { + reg >>= EXYNOS_EMUL_DATA_SHIFT; + temp_code = reg & EXYNOS_EMUL_DATA_MASK; + temp = code_to_temp(data, temp_code); + } +out: + return sprintf(buf, "%d\n", temp * MCELSIUS); +} + +static ssize_t exynos_tmu_emulation_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + unsigned int reg; + int temp; + + if (data->soc == SOC_ARCH_EXYNOS4210) + goto out; + + if (!sscanf(buf, "%d\n", &temp) || temp < 0) + return -EINVAL; + + mutex_lock(&data->lock); + clk_enable(data->clk); + + reg = readl(data->base + EXYNOS_EMUL_CON); + + if (temp) { + /* Both CELSIUS and MCELSIUS type are available for input */ + if (temp > MCELSIUS) + temp /= MCELSIUS; + + reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) | + (temp_to_code(data, (temp / MCELSIUS)) + << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE; + } else { + reg &= ~EXYNOS_EMUL_ENABLE; + } + + writel(reg, data->base + EXYNOS_EMUL_CON); + + clk_disable(data->clk); + mutex_unlock(&data->lock); + +out: + return count; +} + +static DEVICE_ATTR(emulation, 0644, exynos_tmu_emulation_show, + exynos_tmu_emulation_store); +static int create_emulation_sysfs(struct device *dev) +{ + return device_create_file(dev, &dev_attr_emulation); +} +static void remove_emulation_sysfs(struct device *dev) +{ + device_remove_file(dev, &dev_attr_emulation); +} +#else +static inline int create_emulation_sysfs(struct device *dev) { return 0; } +static inline void remove_emulation_sysfs(struct device *dev) {} +#endif + static int __devinit exynos_tmu_probe(struct platform_device *pdev) { struct exynos_tmu_data *data; @@ -930,6 +1026,11 @@ static int __devinit exynos_tmu_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Failed to register thermal interface\n"); goto err_clk; } + + ret = create_emulation_sysfs(&pdev->dev); + if (ret) + dev_err(&pdev->dev, "Failed to create emulation mode sysfs node\n"); + return 0; err_clk: platform_set_drvdata(pdev, NULL); @@ -941,6 +1042,8 @@ static int __devexit exynos_tmu_remove(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); + remove_emulation_sysfs(&pdev->dev); + exynos_tmu_control(pdev, false); exynos_unregister_thermal(); |
