summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio31
-rw-r--r--drivers/iio/industrialio-core.c16
-rw-r--r--drivers/staging/comedi/drivers.c5
-rw-r--r--drivers/staging/iio/Documentation/device.txt2
-rw-r--r--drivers/staging/iio/adc/Kconfig1
-rw-r--r--drivers/staging/iio/adc/ad7606_core.c3
-rw-r--r--drivers/staging/omapdrm/omap_fbdev.c10
-rw-r--r--fs/pstore/inode.c2
-rw-r--r--fs/pstore/ram.c3
-rw-r--r--fs/pstore/ram_core.c27
-rw-r--r--include/linux/pstore_ram.h2
11 files changed, 78 insertions, 24 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index e0f68f6a0e2a..05449c68952c 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -218,6 +218,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -272,6 +273,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
+What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
KernelVersion: 2.635
Contact: linux-iio@vger.kernel.org
@@ -297,14 +299,19 @@ Description:
gives the 3dB frequency of the filter in Hz.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled, no bias etc.) output voltage for
channel Y. The number must always be specified and
unique if the output corresponds to a single channel.
+ While DAC like devices typically use out_voltage,
+ a continuous frequency generating device, such as
+ a DDS or PLL should use out_altvoltage.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
@@ -315,6 +322,8 @@ Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
@@ -331,6 +340,8 @@ Description:
What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
@@ -339,6 +350,8 @@ Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
@@ -348,6 +361,24 @@ Description:
operation. Y may be suppressed if all outputs are controlled
together.
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Output frequency for channel Y in Hz. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Phase in radians of one frequency/clock output Y
+ (out_altvoltageY) relative to another frequency/clock output
+ (out_altvoltageZ) of the device X. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
What: /sys/bus/iio/devices/iio:deviceX/events
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index cf9ecd0ae7c9..a5a446beb2fa 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -724,7 +724,6 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev)
* New channel registration method - relies on the fact a group does
* not need to be initialized if it is name is NULL.
*/
- INIT_LIST_HEAD(&indio_dev->channel_attr_list);
if (indio_dev->channels)
for (i = 0; i < indio_dev->num_channels; i++) {
ret = iio_device_add_channel_sysfs(indio_dev,
@@ -788,12 +787,16 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev)
static void iio_dev_release(struct device *device)
{
struct iio_dev *indio_dev = dev_to_iio_dev(device);
- cdev_del(&indio_dev->chrdev);
+ if (indio_dev->chrdev.dev)
+ cdev_del(&indio_dev->chrdev);
if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
iio_device_unregister_trigger_consumer(indio_dev);
iio_device_unregister_eventset(indio_dev);
iio_device_unregister_sysfs(indio_dev);
iio_device_unregister_debugfs(indio_dev);
+
+ ida_simple_remove(&iio_ida, indio_dev->id);
+ kfree(indio_dev);
}
static struct device_type iio_dev_type = {
@@ -824,6 +827,7 @@ struct iio_dev *iio_device_alloc(int sizeof_priv)
dev_set_drvdata(&dev->dev, (void *)dev);
mutex_init(&dev->mlock);
mutex_init(&dev->info_exist_lock);
+ INIT_LIST_HEAD(&dev->channel_attr_list);
dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
if (dev->id < 0) {
@@ -841,10 +845,8 @@ EXPORT_SYMBOL(iio_device_alloc);
void iio_device_free(struct iio_dev *dev)
{
- if (dev) {
- ida_simple_remove(&iio_ida, dev->id);
- kfree(dev);
- }
+ if (dev)
+ put_device(&dev->dev);
}
EXPORT_SYMBOL(iio_device_free);
@@ -965,7 +967,7 @@ void iio_device_unregister(struct iio_dev *indio_dev)
mutex_lock(&indio_dev->info_exist_lock);
indio_dev->info = NULL;
mutex_unlock(&indio_dev->info_exist_lock);
- device_unregister(&indio_dev->dev);
+ device_del(&indio_dev->dev);
}
EXPORT_SYMBOL(iio_device_unregister);
subsys_initcall(iio_init);
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index 6af4a5b302df..bac3bc11d519 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -30,6 +30,7 @@
#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/errno.h>
+#include <linux/kconfig.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fcntl.h>
@@ -1030,6 +1031,8 @@ void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
+#if IS_ENABLED(CONFIG_USB)
+
static int comedi_old_usb_auto_config(struct usb_interface *intf,
struct comedi_driver *driver)
{
@@ -1092,3 +1095,5 @@ void comedi_usb_driver_unregister(struct comedi_driver *comedi_driver,
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
+
+#endif
diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt
index 0338c7cd0a8b..f03fbd3bb454 100644
--- a/drivers/staging/iio/Documentation/device.txt
+++ b/drivers/staging/iio/Documentation/device.txt
@@ -29,8 +29,6 @@ Then fill in the following:
* info->driver_module:
Set to THIS_MODULE. Used to ensure correct ownership
of various resources allocate by the core.
- * info->num_interrupt_lines:
- Number of event triggering hardware lines the device has.
* info->event_attrs:
Attributes used to enable / disable hardware events.
* info->attrs:
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 2490dd25093b..8f1b3af02f29 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -13,6 +13,7 @@ config AD7291
config AD7298
tristate "Analog Devices AD7298 ADC driver"
depends on SPI
+ select IIO_KFIFO_BUF if IIO_BUFFER
help
Say yes here to build support for Analog Devices AD7298
8 Channel ADC with temperature sensor.
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 10ab6dc823b9..a13afff2dfe6 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -235,7 +235,8 @@ static const struct attribute_group ad7606_attribute_group_range = {
.indexed = 1, \
.channel = num, \
.address = num, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT, \
.scan_index = num, \
.scan_type = IIO_ST('s', 16, 16, 0), \
}
diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c
index 11acd4c35ed2..8c6ed3b0c6f6 100644
--- a/drivers/staging/omapdrm/omap_fbdev.c
+++ b/drivers/staging/omapdrm/omap_fbdev.c
@@ -208,7 +208,8 @@ static int omap_fbdev_create(struct drm_fb_helper *helper,
*/
ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
if (ret) {
- dev_err(dev->dev, "could not map (paddr)!\n");
+ dev_err(dev->dev,
+ "could not map (paddr)! Skipping framebuffer alloc\n");
ret = -ENOMEM;
goto fail;
}
@@ -388,8 +389,11 @@ void omap_fbdev_free(struct drm_device *dev)
fbi = helper->fbdev;
- unregister_framebuffer(fbi);
- framebuffer_release(fbi);
+ /* only cleanup framebuffer if it is present */
+ if (fbi) {
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
+ }
drm_fb_helper_fini(helper);
diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c
index aeb19e68e086..11a2aa2a56c4 100644
--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -258,7 +258,7 @@ fail:
return rc;
}
-int pstore_fill_super(struct super_block *sb, void *data, int silent)
+static int pstore_fill_super(struct super_block *sb, void *data, int silent)
{
struct inode *inode;
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index 9123cce28c1e..453030f9c5bc 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -106,6 +106,8 @@ static ssize_t ramoops_pstore_read(u64 *id, enum pstore_type_id *type,
time->tv_sec = 0;
time->tv_nsec = 0;
+ /* Update old/shadowed buffer. */
+ persistent_ram_save_old(prz);
size = persistent_ram_old_size(prz);
*buf = kmalloc(size, GFP_KERNEL);
if (*buf == NULL)
@@ -184,6 +186,7 @@ static int ramoops_pstore_erase(enum pstore_type_id type, u64 id,
return -EINVAL;
persistent_ram_free_old(cxt->przs[id]);
+ persistent_ram_zap(cxt->przs[id]);
return 0;
}
diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c
index 31f8d184f3a0..c5fbdbbf81ac 100644
--- a/fs/pstore/ram_core.c
+++ b/fs/pstore/ram_core.c
@@ -250,23 +250,24 @@ static void notrace persistent_ram_update(struct persistent_ram_zone *prz,
persistent_ram_update_ecc(prz, start, count);
}
-static void __init
-persistent_ram_save_old(struct persistent_ram_zone *prz)
+void persistent_ram_save_old(struct persistent_ram_zone *prz)
{
struct persistent_ram_buffer *buffer = prz->buffer;
size_t size = buffer_size(prz);
size_t start = buffer_start(prz);
- char *dest;
- persistent_ram_ecc_old(prz);
+ if (!size)
+ return;
- dest = kmalloc(size, GFP_KERNEL);
- if (dest == NULL) {
+ if (!prz->old_log) {
+ persistent_ram_ecc_old(prz);
+ prz->old_log = kmalloc(size, GFP_KERNEL);
+ }
+ if (!prz->old_log) {
pr_err("persistent_ram: failed to allocate buffer\n");
return;
}
- prz->old_log = dest;
prz->old_log_size = size;
memcpy(prz->old_log, &buffer->data[start], size - start);
memcpy(prz->old_log + size - start, &buffer->data[0], start);
@@ -319,6 +320,13 @@ void persistent_ram_free_old(struct persistent_ram_zone *prz)
prz->old_log_size = 0;
}
+void persistent_ram_zap(struct persistent_ram_zone *prz)
+{
+ atomic_set(&prz->buffer->start, 0);
+ atomic_set(&prz->buffer->size, 0);
+ persistent_ram_update_header_ecc(prz);
+}
+
static void *persistent_ram_vmap(phys_addr_t start, size_t size)
{
struct page **pages;
@@ -405,6 +413,7 @@ static int __init persistent_ram_post_init(struct persistent_ram_zone *prz, bool
" size %zu, start %zu\n",
buffer_size(prz), buffer_start(prz));
persistent_ram_save_old(prz);
+ return 0;
}
} else {
pr_info("persistent_ram: no valid data in buffer"
@@ -412,8 +421,7 @@ static int __init persistent_ram_post_init(struct persistent_ram_zone *prz, bool
}
prz->buffer->sig = PERSISTENT_RAM_SIG;
- atomic_set(&prz->buffer->start, 0);
- atomic_set(&prz->buffer->size, 0);
+ persistent_ram_zap(prz);
return 0;
}
@@ -448,7 +456,6 @@ struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start,
goto err;
persistent_ram_post_init(prz, ecc);
- persistent_ram_update_header_ecc(prz);
return prz;
err:
diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h
index 7ed7fd4dba49..3b823d49a85a 100644
--- a/include/linux/pstore_ram.h
+++ b/include/linux/pstore_ram.h
@@ -69,12 +69,14 @@ struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start,
size_t size,
bool ecc);
void persistent_ram_free(struct persistent_ram_zone *prz);
+void persistent_ram_zap(struct persistent_ram_zone *prz);
struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
bool ecc);
int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
unsigned int count);
+void persistent_ram_save_old(struct persistent_ram_zone *prz);
size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
void *persistent_ram_old(struct persistent_ram_zone *prz);
void persistent_ram_free_old(struct persistent_ram_zone *prz);
OpenPOWER on IntegriCloud