diff options
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/usb/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/net/usb/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/usb/hso.c | 2836 |
4 files changed, 2848 insertions, 0 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index c52738a3aaab..c96fe2036800 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -237,6 +237,7 @@ obj-$(CONFIG_USB_CATC) += usb/ obj-$(CONFIG_USB_KAWETH) += usb/ obj-$(CONFIG_USB_PEGASUS) += usb/ obj-$(CONFIG_USB_RTL8150) += usb/ +obj-$(CONFIG_USB_HSO) += usb/ obj-$(CONFIG_USB_USBNET) += usb/ obj-$(CONFIG_USB_ZD1201) += usb/ diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 0604f3faf043..68e198bd538b 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -154,6 +154,16 @@ config USB_NET_AX8817X This driver creates an interface named "ethX", where X depends on what other networking devices you have in use. +config USB_HSO + tristate "Option USB High Speed Mobile Devices" + depends on USB && RFKILL + default n + help + Choose this option if you have an Option HSDPA/HSUPA card. + These cards support downlink speeds of 7.2Mbps or greater. + + To compile this driver as a module, choose M here: the + module will be called hso. config USB_NET_CDCETHER tristate "CDC Ethernet support (smart devices such as cable modems)" diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 595a539f8384..24800c157f98 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_USB_CATC) += catc.o obj-$(CONFIG_USB_KAWETH) += kaweth.o obj-$(CONFIG_USB_PEGASUS) += pegasus.o obj-$(CONFIG_USB_RTL8150) += rtl8150.o +obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c new file mode 100644 index 000000000000..031d07b105af --- /dev/null +++ b/drivers/net/usb/hso.c @@ -0,0 +1,2836 @@ +/****************************************************************************** + * + * Driver for Option High Speed Mobile Devices. + * + * Copyright (C) 2008 Option International + * Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd) + * <ajb@spheresystems.co.uk> + * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de> + * Copyright (C) 2008 Novell, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA + * + * + *****************************************************************************/ + +/****************************************************************************** + * + * Description of the device: + * + * Interface 0: Contains the IP network interface on the bulk end points. + * The multiplexed serial ports are using the interrupt and + * control endpoints. + * Interrupt contains a bitmap telling which multiplexed + * serialport needs servicing. + * + * Interface 1: Diagnostics port, uses bulk only, do not submit urbs until the + * port is opened, as this have a huge impact on the network port + * throughput. + * + * Interface 2: Standard modem interface - circuit switched interface, should + * not be used. + * + *****************************************************************************/ + +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/module.h> +#include <linux/ethtool.h> +#include <linux/usb.h> +#include <linux/timer.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/kmod.h> +#include <linux/rfkill.h> +#include <linux/ip.h> +#include <linux/uaccess.h> +#include <linux/usb/cdc.h> +#include <net/arp.h> +#include <asm/byteorder.h> + + +#define DRIVER_VERSION "1.2" +#define MOD_AUTHOR "Option Wireless" +#define MOD_DESCRIPTION "USB High Speed Option driver" +#define MOD_LICENSE "GPL" + +#define HSO_MAX_NET_DEVICES 10 +#define HSO__MAX_MTU 2048 +#define DEFAULT_MTU 1500 +#define DEFAULT_MRU 1500 + +#define CTRL_URB_RX_SIZE 1024 +#define CTRL_URB_TX_SIZE 64 + +#define BULK_URB_RX_SIZE 4096 +#define BULK_URB_TX_SIZE 8192 + +#define MUX_BULK_RX_BUF_SIZE HSO__MAX_MTU +#define MUX_BULK_TX_BUF_SIZE HSO__MAX_MTU +#define MUX_BULK_RX_BUF_COUNT 4 +#define USB_TYPE_OPTION_VENDOR 0x20 + +/* These definitions are used with the struct hso_net flags element */ +/* - use *_bit operations on it. (bit indices not values.) */ +#define HSO_NET_RUNNING 0 + +#define HSO_NET_TX_TIMEOUT (HZ*10) + +/* Serial port defines and structs. */ +#define HSO_SERIAL_FLAG_RX_SENT 0 + +#define HSO_SERIAL_MAGIC 0x48534f31 + +/* Number of ttys to handle */ +#define HSO_SERIAL_TTY_MINORS 256 + +#define MAX_RX_URBS 2 + +#define get_serial_by_tty(x) \ + (x ? (struct hso_serial *)x->driver_data : NULL) + +/*****************************************************************************/ +/* Debugging functions */ +/*****************************************************************************/ +#define D__(lvl_, fmt, arg...) \ + do { \ + printk(lvl_ "[%d:%s]: " fmt "\n", \ + __LINE__, __func__, ## arg); \ + } while (0) + +#define D_(lvl, args...) \ + do { \ + if (lvl & debug) \ + D__(KERN_INFO, args); \ + } while (0) + +#define D1(args...) D_(0x01, ##args) +#define D2(args...) D_(0x02, ##args) +#define D3(args...) D_(0x04, ##args) +#define D4(args...) D_(0x08, ##args) +#define D5(args...) D_(0x10, ##args) + +/*****************************************************************************/ +/* Enumerators */ +/*****************************************************************************/ +enum pkt_parse_state { + WAIT_IP, + WAIT_DATA, + WAIT_SYNC +}; + +/*****************************************************************************/ +/* Structs */ +/*****************************************************************************/ + +struct hso_shared_int { + struct usb_endpoint_descriptor *intr_endp; + void *shared_intr_buf; + struct urb *shared_intr_urb; + struct usb_device *usb; + int use_count; + int ref_count; + struct mutex shared_int_lock; +}; + +struct hso_net { + struct hso_device *parent; + struct net_device *net; + struct rfkill *rfkill; + + struct usb_endpoint_descriptor *in_endp; + struct usb_endpoint_descriptor *out_endp; + + struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT]; + struct urb *mux_bulk_tx_urb; + void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT]; + void *mux_bulk_tx_buf; + + struct sk_buff *skb_rx_buf; + struct sk_buff *skb_tx_buf; + + enum pkt_parse_state rx_parse_state; + spinlock_t net_lock; + + unsigned short rx_buf_size; + unsigned short rx_buf_missing; + struct iphdr rx_ip_hdr; + + unsigned long flags; +}; + +struct hso_serial { + struct hso_device *parent; + int magic; + u8 minor; + + struct hso_shared_int *shared_int; + + /* rx/tx urb could be either a bulk urb or a control urb depending + on which serial port it is used on. */ + struct urb *rx_urb[MAX_RX_URBS]; + u8 num_rx_urbs; + u8 *rx_data[MAX_RX_URBS]; + u16 rx_data_length; /* should contain allocated length */ + + struct urb *tx_urb; + u8 *tx_data; + u8 *tx_buffer; + u16 tx_data_length; /* should contain allocated length */ + u16 tx_data_count; + u16 tx_buffer_count; + struct usb_ctrlrequest ctrl_req_tx; + struct usb_ctrlrequest ctrl_req_rx; + + struct usb_endpoint_descriptor *in_endp; + struct usb_endpoint_descriptor *out_endp; + + unsigned long flags; + u8 rts_state; + u8 dtr_state; + unsigned tx_urb_used:1; + + /* from usb_serial_port */ + struct tty_struct *tty; + int open_count; + spinlock_t serial_lock; + + int (*write_data) (struct hso_serial *serial); +}; + +struct hso_device { + union { + struct hso_serial *dev_serial; + struct hso_net *dev_net; + } port_data; + + u32 port_spec; + + u8 is_active; + u8 usb_gone; + struct work_struct async_get_intf; + struct work_struct async_put_intf; + + struct usb_device *usb; + struct usb_interface *interface; + + struct device *dev; + struct kref ref; + struct mutex mutex; +}; + +/* Type of interface */ +#define HSO_INTF_MASK 0xFF00 +#define HSO_INTF_MUX 0x0100 +#define HSO_INTF_BULK 0x0200 + +/* Type of port */ +#define HSO_PORT_MASK 0xFF +#define HSO_PORT_NO_PORT 0x0 +#define HSO_PORT_CONTROL 0x1 +#define HSO_PORT_APP 0x2 +#define HSO_PORT_GPS 0x3 +#define HSO_PORT_PCSC 0x4 +#define HSO_PORT_APP2 0x5 +#define HSO_PORT_GPS_CONTROL 0x6 +#define HSO_PORT_MSD 0x7 +#define HSO_PORT_VOICE 0x8 +#define HSO_PORT_DIAG2 0x9 +#define HSO_PORT_DIAG 0x10 +#define HSO_PORT_MODEM 0x11 +#define HSO_PORT_NETWORK 0x12 + +/* Additional device info */ +#define HSO_INFO_MASK 0xFF000000 +#define HSO_INFO_CRC_BUG 0x01000000 + +/*****************************************************************************/ +/* Prototypes */ +/*****************************************************************************/ +/* Serial driver functions */ +static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static void ctrl_callback(struct urb *urb); +static void put_rxbuf_data(struct urb *urb, struct hso_serial *serial); +static void hso_kick_transmit(struct hso_serial *serial); +/* Helper functions */ +static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int, + struct usb_device *usb, gfp_t gfp); +static void log_usb_status(int status, const char *function); +static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf, + int type, int dir); +static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports); +static void hso_free_interface(struct usb_interface *intf); +static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags); +static int hso_stop_serial_device(struct hso_device *hso_dev); +static int hso_start_net_device(struct hso_device *hso_dev); +static void hso_free_shared_int(struct hso_shared_int *shared_int); +static int hso_stop_net_device(struct hso_device *hso_dev); +static void hso_serial_ref_free(struct kref *ref); +static void async_get_intf(struct work_struct *data); +static void async_put_intf(struct work_struct *data); +static int hso_put_activity(struct hso_device *hso_dev); +static int hso_get_activity(struct hso_device *hso_dev); + +/*****************************************************************************/ +/* Helping functions */ +/*****************************************************************************/ + +/* #define DEBUG */ + +#define dev2net(x) (x->port_data.dev_net) +#define dev2ser(x) (x->port_data.dev_serial) + +/* Debugging functions */ +#ifdef DEBUG +static void dbg_dump(int line_count, const char *func_name, unsigned char *buf, + unsigned int len) +{ + u8 i = 0; + + printk(KERN_DEBUG "[%d:%s]: len %d", line_count, func_name, len); + + for (i = 0; i < len; i++) { + if (!(i % 16)) + printk("\n 0x%03x: ", i); + printk("%02x ", (unsigned char)buf[i]); + } + printk("\n"); +} + +#define DUMP(buf_, len_) \ + dbg_dump(__LINE__, __func__, buf_, len_) + +#define DUMP1(buf_, len_) \ + do { \ + if (0x01 & debug) \ + DUMP(buf_, len_); \ + } while (0) +#else +#define DUMP(buf_, len_) +#define DUMP1(buf_, len_) +#endif + +/* module parameters */ +static int debug; +static int tty_major; +static int disable_net; + +/* driver info */ +static const char driver_name[] = "hso"; +static const char tty_filename[] = "ttyHS"; +static const char *version = __FILE__ ": " DRIVER_VERSION " " MOD_AUTHOR; +/* the usb driver itself (registered in hso_init) */ +static struct usb_driver hso_driver; +/* serial structures */ +static struct tty_driver *tty_drv; +static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS]; +static struct hso_device *network_table[HSO_MAX_NET_DEVICES]; +static spinlock_t serial_table_lock; +static struct ktermios *hso_serial_termios[HSO_SERIAL_TTY_MINORS]; +static struct ktermios *hso_serial_termios_locked[HSO_SERIAL_TTY_MINORS]; + +static const s32 default_port_spec[] = { + HSO_INTF_MUX | HSO_PORT_NETWORK, + HSO_INTF_BULK | HSO_PORT_DIAG, + HSO_INTF_BULK | HSO_PORT_MODEM, + 0 +}; + +static const s32 icon321_port_spec[] = { + HSO_INTF_MUX | HSO_PORT_NETWORK, + HSO_INTF_BULK | HSO_PORT_DIAG2, + HSO_INTF_BULK | HSO_PORT_MODEM, + HSO_INTF_BULK | HSO_PORT_DIAG, + 0 +}; + +#define default_port_device(vendor, product) \ + USB_DEVICE(vendor, product), \ + .driver_info = (kernel_ulong_t)default_port_spec + +#define icon321_port_device(vendor, product) \ + USB_DEVICE(vendor, product), \ + .driver_info = (kernel_ulong_t)icon321_port_spec + +/* list of devices we support */ +static const struct usb_device_id hso_ids[] = { + {default_port_device(0x0af0, 0x6711)}, + {default_port_device(0x0af0, 0x6731)}, + {default_port_device(0x0af0, 0x6751)}, + {default_port_device(0x0af0, 0x6771)}, + {default_port_device(0x0af0, 0x6791)}, + {default_port_device(0x0af0, 0x6811)}, + {default_port_device(0x0af0, 0x6911)}, + {default_port_device(0x0af0, 0x6951)}, + {default_port_device(0x0af0, 0x6971)}, + {default_port_device(0x0af0, 0x7011)}, + {default_port_device(0x0af0, 0x7031)}, + {default_port_device(0x0af0, 0x7051)}, + {default_port_device(0x0af0, 0x7071)}, + {default_port_device(0x0af0, 0x7111)}, + {default_port_device(0x0af0, 0x7211)}, + {default_port_device(0x0af0, 0x7251)}, + {default_port_device(0x0af0, 0x7271)}, + {default_port_device(0x0af0, 0x7311)}, + {default_port_device(0x0af0, 0xc031)}, /* Icon-Edge */ + {icon321_port_device(0x0af0, 0xd013)}, /* Module HSxPA */ + {icon321_port_device(0x0af0, 0xd031)}, /* Icon-321 */ + {default_port_device(0x0af0, 0xd033)}, /* Icon-322 */ + {USB_DEVICE(0x0af0, 0x7301)}, /* GE40x */ + {USB_DEVICE(0x0af0, 0x7361)}, /* GE40x */ + {USB_DEVICE(0x0af0, 0x7401)}, /* GI 0401 */ + {USB_DEVICE(0x0af0, 0x7501)}, /* GTM 382 */ + {USB_DEVICE(0x0af0, 0x7601)}, /* GE40x */ + {} +}; +MODULE_DEVICE_TABLE(usb, hso_ids); + +/* Sysfs attribute */ +static ssize_t hso_sysfs_show_porttype(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hso_device *hso_dev = dev->driver_data; + char *port_name; + + if (!hso_dev) + return 0; + + switch (hso_dev->port_spec & HSO_PORT_MASK) { + case HSO_PORT_CONTROL: + port_name = "Control"; + break; + case HSO_PORT_APP: + port_name = "Application"; + break; + case HSO_PORT_APP2: + port_name = "Application2"; + break; + case HSO_PORT_GPS: + port_name = "GPS"; + break; + case HSO_PORT_GPS_CONTROL: + port_name = "GPS Control"; + break; + case HSO_PORT_PCSC: + port_name = "PCSC"; + break; + case HSO_PORT_DIAG: + port_name = "Diagnostic"; + break; + case HSO_PORT_DIAG2: + port_name = "Diagnostic2"; + break; + case HSO_PORT_MODEM: + port_name = "Modem"; + break; + case HSO_PORT_NETWORK: + port_name = "Network"; + break; + default: + port_name = "Unknown"; + break; + } + + return sprintf(buf, "%s\n", port_name); +} +static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL); + +/* converts mux value to a port spec value */ +static u32 hso_mux_to_port(int mux) +{ + u32 result; + + switch (mux) { + case 0x1: + result = HSO_PORT_CONTROL; + break; + case 0x2: + result = HSO_PORT_APP; + break; + case 0x4: + result = HSO_PORT_PCSC; + break; + case 0x8: + result = HSO_PORT_GPS; + break; + case 0x10: + result = HSO_PORT_APP2; + break; + default: + result = HSO_PORT_NO_PORT; + } + return result; +} + +/* converts port spec value to a mux value */ +static u32 hso_port_to_mux(int port) +{ + u32 result; + + switch (port & HSO_PORT_MASK) { + case HSO_PORT_CONTROL: + result = 0x0; + break; + case HSO_PORT_APP: + result = 0x1; + break; + case HSO_PORT_PCSC: + result = 0x2; + break; + case HSO_PORT_GPS: + result = 0x3; + break; + case HSO_PORT_APP2: + result = 0x4; + break; + default: + result = 0x0; + } + return result; +} + +static struct hso_serial *get_serial_by_shared_int_and_type( + struct hso_shared_int *shared_int, + int mux) +{ + int i, port; + + port = hso_mux_to_port(mux); + + for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { + if (serial_table[i] + && (dev2ser(serial_table[i])->shared_int == shared_int) + && ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) { + return dev2ser(serial_table[i]); + } + } + + return NULL; +} + +static struct hso_serial *get_serial_by_index(unsigned index) +{ + struct hso_serial *serial; + unsigned long flags; + + if (!serial_table[index]) + return NULL; + spin_lock_irqsave(&serial_table_lock, flags); + serial = dev2ser(serial_table[index]); + spin_unlock_irqrestore(&serial_table_lock, flags); + + return serial; +} + +static int get_free_serial_index(void) +{ + int index; + unsigned long flags; + + spin_lock_irqsave(&serial_table_lock, flags); + for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) { + if (serial_table[index] == NULL) { + spin_unlock_irqrestore(&serial_table_lock, flags); + return index; + } + } + spin_unlock_irqrestore(&serial_table_lock, flags); + + printk(KERN_ERR "%s: no free serial devices in table\n", __func__); + return -1; +} + +static void set_serial_by_index(unsigned index, struct hso_serial *serial) +{ + unsigned long flags; + spin_lock_irqsave(&serial_table_lock, flags); + if (serial) + serial_table[index] = serial->parent; + else + serial_table[index] = NULL; + spin_unlock_irqrestore(&serial_table_lock, flags); +} + +/* log a meaningfull explanation of an USB status */ +static void log_usb_status(int status, const char *function) +{ + char *explanation; + + switch (status) { + case -ENODEV: + explanation = "no device"; + break; + case -ENOENT: + explanation = "endpoint not enabled"; + break; + case -EPIPE: + explanation = "endpoint stalled"; + break; + case -ENOSPC: + explanation = "not enough bandwidth"; + break; + case -ESHUTDOWN: + explanation = "device disabled"; + break; + case -EHOSTUNREACH: + explanation = "device suspended"; + break; + case -EINVAL: + case -EAGAIN: + case -EFBIG: + case -EMSGSIZE: + explanation = "internal error"; + break; + default: + explanation = "unknown status"; + break; + } + D1("%s: received USB status - %s (%d)", function, explanation, status); +} + +/* Network interface functions */ + +/* called when net interface is brought up by ifconfig */ +static int hso_net_open(struct net_device *net) +{ + struct hso_net *odev = netdev_priv(net); + unsigned long flags = 0; + + if (!odev) { + dev_err(&net->dev, "No net device !\n"); + return -ENODEV; + } + + odev->skb_tx_buf = NULL; + + /* setup environment */ + spin_lock_irqsave(&odev->net_lock, flags); + odev->rx_parse_state = WAIT_IP; + odev->rx_buf_size = 0; + odev->rx_buf_missing = sizeof(struct iphdr); + spin_unlock_irqrestore(&odev->net_lock, flags); + + hso_start_net_device(odev->parent); + + /* We are up and running. */ + set_bit(HSO_NET_RUNNING, &odev->flags); + + /* Tell the kernel we are ready to start receiving from it */ + netif_start_queue(net); + + return 0; +} + +/* called when interface is brought down by ifconfig */ +static int hso_net_close(struct net_device *net) +{ + struct hso_net *odev = netdev_priv(net); + + /* we don't need the queue anymore */ + netif_stop_queue(net); + /* no longer running */ + clear_bit(HSO_NET_RUNNING, &odev->flags); + + hso_stop_net_device(odev->parent); + + /* done */ + return 0; +} + +/* USB tells is xmit done, we should start the netqueue again */ +static void write_bulk_callback(struct urb *urb) +{ + struct hso_net *odev = urb->context; + int status = urb->status; + + /* Sanity check */ + if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) { + dev_err(&urb->dev->dev, "%s: device not running\n", __func__); + return; + } + + /* Do we still have a valid kernel network device? */ + if (!netif_device_present(odev->net)) { + dev_err(&urb->dev->dev, "%s: net device not present\n", + __func__); + return; + } + + /* log status, but don't act on it, we don't need to resubmit anything + * anyhow */ + if (status) + log_usb_status(status, __func__); + + hso_put_activity(odev->parent); + + /* Tell the network interface we are ready for another frame */ + netif_wake_queue(odev->net); +} + +/* called by kernel when we need to transmit a packet */ +static int hso_net_start_xmit(struct sk_buff *skb, struct net_device *net) +{ + struct hso_net *odev = netdev_priv(net); + int result; + + /* Tell the kernel, "No more frames 'til we are done with this one." */ + netif_stop_queue(net); + if (hso_get_activity(odev->parent) == -EAGAIN) { + odev->skb_tx_buf = skb; + return 0; + } + + /* log if asked */ + DUMP1(skb->data, skb->len); + /* Copy it from kernel memory to OUR memory */ + memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len); + D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE); + + /* Fill in the URB for shipping it out. */ + usb_fill_bulk_urb(odev->mux_bulk_tx_urb, + odev->parent->usb, + usb_sndbulkpipe(odev->parent->usb, + odev->out_endp-> + bEndpointAddress & 0x7F), + odev->mux_bulk_tx_buf, skb->len, write_bulk_callback, + odev); + + /* Deal with the Zero Length packet problem, I hope */ + odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET; + + /* Send the URB on its merry way. */ + result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC); + if (result) { + dev_warn(&odev->parent->interface->dev, + "failed mux_bulk_tx_urb %d", result); + net->stats.tx_errors++; + netif_start_queue(net); + } else { + net->stats.tx_packets++; + net->stats.tx_bytes += skb->len; + /* And tell the kernel when the last transmit started. */ + net->trans_start = jiffies; + } + dev_kfree_skb(skb); + /* we're done */ + return result; +} + +static void hso_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) +{ + struct hso_net *odev = netdev_priv(net); + + strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN); + strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN); + usb_make_path(odev->parent->usb, info->bus_info, sizeof info->bus_info); +} + +static struct ethtool_ops ops = { + .get_drvinfo = hso_get_drvinfo, + .get_link = ethtool_op_get_link +}; + +/* called when a packet did not ack after watchdogtimeout */ +static void hso_net_tx_timeout(struct net_device *net) +{ + struct hso_net *odev = netdev_priv(net); + + if (!odev) + return; + + /* Tell syslog we are hosed. */ + dev_warn(&net->dev, "Tx timed out.\n"); + + /* Tear the waiting frame off the list */ + if (odev->mux_bulk_tx_urb + && (odev->mux_bulk_tx_urb->status == -EINPROGRESS)) + usb_unlink_urb(odev->mux_bulk_tx_urb); + + /* Update statistics */ + net->stats.tx_errors++; +} + +/* make a real packet from the received USB buffer */ +static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt, + unsigned int count, unsigned char is_eop) +{ + unsigned short temp_bytes; + unsigned short buffer_offset = 0; + unsigned short frame_len; + unsigned char *tmp_rx_buf; + + /* log if needed */ + D1("Rx %d bytes", count); + DUMP(ip_pkt, min(128, (int)count)); + + while (count) { + switch (odev->rx_parse_state) { + case WAIT_IP: + /* waiting for IP header. */ + /* wanted bytes - size of ip header */ + temp_bytes = + (count < + odev->rx_buf_missing) ? count : odev-> + rx_buf_missing; + + memcpy(((unsigned char *)(&odev->rx_ip_hdr)) + + odev->rx_buf_size, ip_pkt + buffer_offset, + temp_bytes); + + odev->rx_buf_size += temp_bytes; + buffer_offset += temp_bytes; + odev->rx_buf_missing -= temp_bytes; + count -= temp_bytes; + + if (!odev->rx_buf_missing) { + /* header is complete allocate an sk_buffer and + * continue to WAIT_DATA */ + frame_len = ntohs(odev->rx_ip_hdr.tot_len); + + if ((frame_len > DEFAULT_MRU) || + (frame_len < sizeof(struct iphdr))) { + dev_err(&odev->net->dev, + "Invalid frame (%d) length\n", + frame_len); + odev->rx_parse_state = WAIT_SYNC; + continue; + } + /* Allocate an sk_buff */ + odev->skb_rx_buf = dev_alloc_skb(frame_len); + if (!odev->skb_rx_buf) { + /* We got no receive buffer. */ + D1("could not allocate memory"); + odev->rx_parse_state = WAIT_SYNC; + return; + } + /* Here's where it came from */ + odev->skb_rx_buf->dev = odev->net; + + /* Copy what we got so far. make room for iphdr + * after tail. */ + tmp_rx_buf = + skb_put(odev->skb_rx_buf, + sizeof(struct iphdr)); + memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr), + sizeof(struct iphdr)); + + /* ETH_HLEN */ + odev->rx_buf_size = sizeof(struct iphdr); + + /* Filip actually use .tot_len */ + odev->rx_buf_missing = + frame_len - sizeof(struct iphdr); + odev->rx_parse_state = WAIT_DATA; + } + break; + + case WAIT_DATA: + temp_bytes = (count < odev->rx_buf_missing) + ? count : odev->rx_buf_missing; + + /* Copy the rest of the bytes that are left in the + * buffer into the waiting sk_buf. */ + /* Make room for temp_bytes after tail. */ + tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes); + memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes); + + odev->rx_buf_missing -= temp_bytes; + count -= temp_bytes; + buffer_offset += temp_bytes; + odev->rx_buf_size += temp_bytes; + if (!odev->rx_buf_missing) { + /* Packet is complete. Inject into stack. */ + /* We have IP packet here */ + odev->skb_rx_buf->protocol = + __constant_htons(ETH_P_IP); + /* don't check it */ + odev->skb_rx_buf->ip_summed = + CHECKSUM_UNNECESSARY; + + skb_reset_mac_header(odev->skb_rx_buf); + + /* Ship it off to the kernel */ + netif_rx(odev->skb_rx_buf); + /* No longer our buffer. */ + odev->skb_rx_buf = NULL; + + /* update out statistics */ + odev->net->stats.rx_packets++; + + odev->net->stats.rx_bytes += odev->rx_buf_size; + + odev->rx_buf_size = 0; + odev->rx_buf_missing = sizeof(struct iphdr); + odev->rx_parse_state = WAIT_IP; + } + break; + + case WAIT_SYNC: + D1(" W_S"); + count = 0; + break; + default: + D1(" "); + count--; + break; + } + } + + /* Recovery mechanism for WAIT_SYNC state. */ + if (is_eop) { + if (odev->rx_parse_state == WAIT_SYNC) { + odev->rx_parse_state = WAIT_IP; + odev->rx_buf_size = 0; + odev->rx_buf_missing = sizeof(struct iphdr); + } + } +} + +/* Moving data from usb to kernel (in interrupt state) */ +static void read_bulk_callback(struct urb *urb) +{ + struct hso_net *odev = urb->context; + struct net_device *net; + int result; + int status = urb->status; + + /* is al ok? (Filip: Who's Al ?) */ + if (status) { + log_usb_status(status, __func__); + return; + } + + /* Sanity check */ + if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) { + D1("BULK IN callback but driver is not active!"); + return; + } + usb_mark_last_busy(urb->dev); + + net = odev->net; + + if (!netif_device_present(net)) { + /* Somebody killed our network interface... */ + return; + } + + if (odev->parent->port_spec & HSO_INFO_CRC_BUG) { + u32 rest; + u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF }; + rest = urb->actual_length % odev->in_endp->wMaxPacketSize; + if (((rest == 5) || (rest == 6)) + && !memcmp(((u8 *) urb->transfer_buffer) + + urb->actual_length - 4, crc_check, 4)) { + urb->actual_length -= 4; + } + } + + /* do we even have a packet? */ + if (urb->actual_length) { + /* Handle the IP stream, add header and push it onto network + * stack if the packet is complete. */ + spin_lock(&odev->net_lock); + packetizeRx(odev, urb->transfer_buffer, urb->actual_length, + (urb->transfer_buffer_length > + urb->actual_length) ? 1 : 0); + spin_unlock(&odev->net_lock); + } + + /* We are done with this URB, resubmit it. Prep the USB to wait for + * another frame. Reuse same as received. */ + usb_fill_bulk_urb(urb, + odev->parent->usb, + usb_rcvbulkpipe(odev->parent->usb, + odev->in_endp-> + bEndpointAddress & 0x7F), + urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE, + read_bulk_callback, odev); + + /* Give this to the USB subsystem so it can tell us when more data + * arrives. */ + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_warn(&odev->parent->interface->dev, + "%s failed submit mux_bulk_rx_urb %d", __func__, + result); +} + +/* Serial driver functions */ + +static void _hso_serial_set_termios(struct tty_struct *tty, + struct ktermios *old) +{ + struct hso_serial *serial = get_serial_by_tty(tty); + struct ktermios *termios; + + if ((!tty) || (!tty->termios) || (!serial)) { + printk(KERN_ERR "%s: no tty structures", __func__); + return; + } + + D4("port %d", serial->minor); + + /* + * The default requirements for this device are: + */ + termios = tty->termios; + termios->c_iflag &= + ~(IGNBRK /* disable ignore break */ + | BRKINT /* disable break causes interrupt */ + | PARMRK /* disable mark parity errors */ + | ISTRIP /* disable clear high bit of input characters */ + | INLCR /* disable translate NL to CR */ + | IGNCR /* disable ignore CR */ + | ICRNL /* disable translate CR to NL */ + | IXON); /* disable enable XON/XOFF flow control */ + + /* disable postprocess output characters */ + termios->c_oflag &= ~OPOST; + + termios->c_lflag &= + ~(ECHO /* disable echo input characters */ + | ECHONL /* disable echo new line */ + | ICANON /* disable erase, kill, werase, and rprnt + special characters */ + | ISIG /* disable interrupt, quit, and suspend special + characters */ + | IEXTEN); /* disable non-POSIX special characters */ + + termios->c_cflag &= + ~(CSIZE /* no size */ + | PARENB /* disable parity bit */ + | CBAUD /* clear current baud rate */ + | CBAUDEX); /* clear current buad rate */ + + termios->c_cflag |= CS8; /* character size 8 bits */ + + /* baud rate 115200 */ + tty_encode_baud_rate(serial->tty, 115200, 115200); + + /* + * Force low_latency on; otherwise the pushes are scheduled; + * this is bad as it opens up the possibility of dropping bytes + * on the floor. We don't want to drop bytes on the floor. :) + */ + serial->tty->low_latency = 1; + return; +} + +/* open the requested serial port */ +static int hso_serial_open(struct tty_struct *tty, struct file *filp) +{ + struct hso_serial *serial = get_serial_by_index(tty->index); + int result; + + /* sanity check */ + if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) { + tty->driver_data = NULL; + D1("Failed to open port"); + return -ENODEV; + } + + mutex_lock(&serial->parent->mutex); + result = usb_autopm_get_interface(serial->parent->interface); + if (result < 0) + goto err_out; + + D1("Opening %d", serial->minor); + kref_get(&serial->parent->ref); + + /* setup */ + tty->driver_data = serial; + serial->tty = tty; + + /* check for port allready opened, if not set the termios */ + serial->open_count++; + if (serial->open_count == 1) { + tty->low_latency = 1; + serial->flags = 0; + /* Force default termio settings */ + _hso_serial_set_termios(tty, NULL); + result = hso_start_serial_device(serial->parent, GFP_KERNEL); + if (result) { + hso_stop_serial_device(serial->parent); + serial->open_count--; + kref_put(&serial->parent->ref, hso_serial_ref_free); + } + } else { + D1("Port was already open"); + } + + usb_autopm_put_interface(serial->parent->interface); + + /* done */ + if (result) + hso_serial_tiocmset(tty, NULL, TIOCM_RTS | TIOCM_DTR, 0); +err_out: + mutex_unlock(&serial->parent->mutex); + return result; +} + +/* close the requested serial port */ +static void hso_serial_close(struct tty_struct *tty, struct file *filp) +{ + struct hso_serial *serial = tty->driver_data; + u8 usb_gone; + + D1("Closing serial port"); + + mutex_lock(&serial->parent->mutex); + usb_gone = serial->parent->usb_gone; + + if (!usb_gone) + usb_autopm_get_interface(serial->parent->interface); + + /* reset the rts and dtr */ + /* do the actual close */ + serial->open_count--; + if (serial->open_count <= 0) { + kref_put(&serial->parent->ref, hso_serial_ref_free); + serial->open_count = 0; + if (serial->tty) { + serial->tty->driver_data = NULL; + serial->tty = NULL; + } + if (!usb_gone) + hso_stop_serial_device(serial->parent); + } + if (!usb_gone) + usb_autopm_put_interface(serial->parent->interface); + mutex_unlock(&serial->parent->mutex); +} + +/* close the requested serial port */ +static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + struct hso_serial *serial = get_serial_by_tty(tty); + int space, tx_bytes; + unsigned long flags; + + /* sanity check */ + if (serial == NULL) { + printk(KERN_ERR "%s: serial is NULL\n", __func__); + return -ENODEV; + } + + spin_lock_irqsave(&serial->serial_lock, flags); + + space = serial->tx_data_length - serial->tx_buffer_count; + tx_bytes = (count < space) ? count : space; + + if (!tx_bytes) + goto out; + + memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes); + serial->tx_buffer_count += tx_bytes; + +out: + spin_unlock_irqrestore(&serial->serial_lock, flags); + + hso_kick_transmit(serial); + /* done */ + return tx_bytes; +} + +/* how much room is there for writing */ +static int hso_serial_write_room(struct tty_struct *tty) +{ + struct hso_serial *serial = get_serial_by_tty(tty); + int room; + unsigned long flags; + + spin_lock_irqsave(&serial->serial_lock, flags); + room = serial->tx_data_length - serial->tx_buffer_count; + spin_unlock_irqrestore(&serial->serial_lock, flags); + + /* return free room */ + return room; +} + +/* setup the term */ +static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) +{ + struct hso_serial *serial = get_serial_by_tty(tty); + unsigned long flags; + + if (old) + D5("Termios called with: cflags new[%d] - old[%d]", + tty->termios->c_cflag, old->c_cflag); + + /* the actual setup */ + spin_lock_irqsave(&serial->serial_lock, flags); + if (serial->open_count) + _hso_serial_set_termios(tty, old); + else + tty->termios = old; + spin_unlock_irqrestore(&serial->serial_lock, flags); + + /* done */ + return; +} + +/* how many characters in the buffer */ +static int hso_serial_chars_in_buffer(struct tty_struct *tty) +{ + struct hso_serial *serial = get_serial_by_tty(tty); + int chars; + unsigned long flags; + + /* sanity check */ + if (serial == NULL) + return 0; + + spin_lock_irqsave(&serial->serial_lock, flags); + chars = serial->tx_buffer_count; + spin_unlock_irqrestore(&serial->serial_lock, flags); + + return chars; +} + +static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file) +{ + unsigned int value; + struct hso_serial *serial = get_serial_by_tty(tty); + unsigned long flags; + + /* sanity check */ + if (!serial) { + D1("no tty structures"); + return -EINVAL; + } + + spin_lock_irqsave(&serial->serial_lock, flags); + value = ((serial->rts_state) ? TIOCM_RTS : 0) | + ((serial->dtr_state) ? TIOCM_DTR : 0); + spin_unlock_irqrestore(&serial->serial_lock, flags); + + return value; +} + +static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + int val = 0; + unsigned long flags; + int if_num; + struct hso_serial *serial = get_serial_by_tty(tty); + + /* sanity check */ + if (!serial) { + D1("no tty structures"); + return -EINVAL; + } + if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber; + + spin_lock_irqsave(&serial->serial_lock, flags); + if (set & TIOCM_RTS) + serial->rts_state = 1; + if (set & TIOCM_DTR) + serial->dtr_state = 1; + + if (clear & TIOCM_RTS) + serial->rts_state = 0; + if (clear & TIOCM_DTR) + serial->dtr_state = 0; + + if (serial->dtr_state) + val |= 0x01; + if (serial->rts_state) + val |= 0x02; + + spin_unlock_irqrestore(&serial->serial_lock, flags); + + return usb_control_msg(serial->parent->usb, + usb_rcvctrlpipe(serial->parent->usb, 0), 0x22, + 0x21, val, if_num, NULL, 0, + USB_CTRL_SET_TIMEOUT); +} + +/* starts a transmit */ +static void hso_kick_transmit(struct hso_serial *serial) +{ + u8 *temp; + unsigned long flags; + int res; + + spin_lock_irqsave(&serial->serial_lock, flags); + if (!serial->tx_buffer_count) + goto out; + + if (serial->tx_urb_used) + goto out; + + /* Wakeup USB interface if necessary */ + if (hso_get_activity(serial->parent) == -EAGAIN) + goto out; + + /* Switch pointers around to avoid memcpy */ + temp = serial->tx_buffer; + serial->tx_buffer = serial->tx_data; + serial->tx_data = temp; + serial->tx_data_count = serial->tx_buffer_count; + serial->tx_buffer_count = 0; + + /* If temp is set, it means we switched buffers */ + if (temp && serial->write_data) { + res = serial->write_data(serial); + if (res >= 0) + serial->tx_urb_used = 1; + } +out: + spin_unlock_irqrestore(&serial->serial_lock, flags); +} + +/* make a request (for reading and writing data to muxed serial port) */ +static int mux_device_request(struct hso_serial *serial, u8 type, u16 port, + struct urb *ctrl_urb, + struct usb_ctrlrequest *ctrl_req, + u8 *ctrl_urb_data, u32 size) +{ + int result; + int pipe; + + /* Sanity check */ + if (!serial || !ctrl_urb || !ctrl_req) { + printk(KERN_ERR "%s: Wrong arguments\n", __func__); + return -EINVAL; + } + + /* initialize */ + ctrl_req->wValue = 0; + ctrl_req->wIndex = hso_port_to_mux(port); + ctrl_req->wLength = size; + + if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) { + /* Reading command */ + ctrl_req->bRequestType = USB_DIR_IN | + USB_TYPE_OPTION_VENDOR | + USB_RECIP_INTERFACE; + ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE; + pipe = usb_rcvctrlpipe(serial->parent->usb, 0); + } else { + /* Writing command */ + ctrl_req->bRequestType = USB_DIR_OUT | + USB_TYPE_OPTION_VENDOR | + USB_RECIP_INTERFACE; + ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND; + pipe = usb_sndctrlpipe(serial->parent->usb, 0); + } + /* syslog */ + D2("%s command (%02x) len: %d, port: %d", + type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write", + ctrl_req->bRequestType, ctrl_req->wLength, port); + + /* Load ctrl urb */ + ctrl_urb->transfer_flags = 0; + usb_fill_control_urb(ctrl_urb, + serial->parent->usb, + pipe, + (u8 *) ctrl_req, + ctrl_urb_data, size, ctrl_callback, serial); + /* Send it on merry way */ + result = usb_submit_urb(ctrl_urb, GFP_ATOMIC); + if (result) { + dev_err(&ctrl_urb->dev->dev, + "%s failed submit ctrl_urb %d type %d", __func__, + result, type); + return result; + } + + /* done */ + return size; +} + +/* called by intr_callback when read occurs */ +static int hso_mux_serial_read(struct hso_serial *serial) +{ + if (!serial) + return -EINVAL; + + /* clean data */ + memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE); + /* make the request */ + + if (serial->num_rx_urbs != 1) { + dev_err(&serial->parent->interface->dev, + "ERROR: mux'd reads with multiple buffers " + "not possible\n"); + return 0; + } + return mux_device_request(serial, + USB_CDC_GET_ENCAPSULATED_RESPONSE, + serial->parent->port_spec & HSO_PORT_MASK, + serial->rx_urb[0], + &serial->ctrl_req_rx, + serial->rx_data[0], serial->rx_data_length); +} + +/* used for muxed serial port callback (muxed serial read) */ +static void intr_callback(struct urb *urb) +{ + struct hso_shared_int *shared_int = urb->context; + struct hso_serial *serial; + unsigned char *port_req; + int status = urb->status; + int i; + + usb_mark_last_busy(urb->dev); + + /* sanity check */ + if (!shared_int) + return; + + /* status check */ + if (status) { + log_usb_status(status, __func__); + return; + } + D4("\n--- Got intr callback 0x%02X ---", status); + + /* what request? */ + port_req = urb->transfer_buffer; + D4(" port_req = 0x%.2X\n", *port_req); + /* loop over all muxed ports to find the one sending this */ + for (i = 0; i < 8; i++) { + /* max 8 channels on MUX */ + if (*port_req & (1 << i)) { + serial = get_serial_by_shared_int_and_type(shared_int, + (1 << i)); + if (serial != NULL) { + D1("Pending read interrupt on port %d\n", i); + if (!test_and_set_bit(HSO_SERIAL_FLAG_RX_SENT, + &serial->flags)) { + /* Setup and send a ctrl req read on + * port i */ + hso_mux_serial_read(serial); + } else { + D1("Already pending a read on " + "port %d\n", i); + } + } + } + } + /* Resubmit interrupt urb */ + hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC); +} + +/* called for writing to muxed serial port */ +static int hso_mux_serial_write_data(struct hso_serial *serial) +{ + if (NULL == serial) + return -EINVAL; + + return mux_device_request(serial, + USB_CDC_SEND_ENCAPSULATED_COMMAND, + serial->parent->port_spec & HSO_PORT_MASK, + serial->tx_urb, + &serial->ctrl_req_tx, + serial->tx_data, serial->tx_data_count); +} + +/* write callback for Diag and CS port */ +static void hso_std_serial_write_bulk_callback(struct urb *urb) +{ + struct hso_serial *serial = urb->context; + int status = urb->status; + + /* sanity check */ + if (!serial) { + D1("serial == NULL"); + return; + } + + spin_lock(&serial->serial_lock); + serial->tx_urb_used = 0; + spin_unlock(&serial->serial_lock); + if (status) { + log_usb_status(status, __func__); + return; + } + hso_put_activity(serial->parent); + tty_wakeup(serial->tty); + hso_kick_transmit(serial); + + D1(" "); + return; +} + +/* called for writing diag or CS serial port */ +static int hso_std_serial_write_data(struct hso_serial *serial) +{ + int count = serial->tx_data_count; + int result; + + usb_fill_bulk_urb(serial->tx_urb, + serial->parent->usb, + usb_sndbulkpipe(serial->parent->usb, + serial->out_endp-> + bEndpointAddress & 0x7F), + serial->tx_data, serial->tx_data_count, + hso_std_serial_write_bulk_callback, serial); + + result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC); + if (result) { + dev_warn(&serial->parent->usb->dev, + "Failed to submit urb - res %d\n", result); + return result; + } + + return count; +} + +/* callback after read or write on muxed serial port */ +static void ctrl_callback(struct urb *urb) +{ + struct hso_serial *serial = urb->context; + struct usb_ctrlrequest *req; + int status = urb->status; + + /* sanity check */ + if (!serial) + return; + + spin_lock(&serial->serial_lock); + serial->tx_urb_used = 0; + spin_unlock(&serial->serial_lock); + if (status) { + log_usb_status(status, __func__); + return; + } + + /* what request? */ + req = (struct usb_ctrlrequest *)(urb->setup_packet); + D4("\n--- Got muxed ctrl callback 0x%02X ---", status); + D4("Actual length of urb = %d\n", urb->actual_length); + DUMP1(urb->transfer_buffer, urb->actual_length); + + if (req->bRequestType == + (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) { + /* response to a read command */ + if (serial->open_count > 0) { + /* handle RX data the normal way */ + put_rxbuf_data(urb, serial); + } + + /* Re issue a read as long as we receive data. */ + if (urb->actual_length != 0) + hso_mux_serial_read(serial); + else + clear_bit(HSO_SERIAL_FLAG_RX_SENT, &serial->flags); + } else { + hso_put_activity(serial->parent); + tty_wakeup(serial->tty); + /* response to a write command */ + hso_kick_transmit(serial); + } +} + +/* handle RX data for serial port */ +static void put_rxbuf_data(struct urb *urb, struct hso_serial *serial) +{ + struct tty_struct *tty = serial->tty; + + /* Sanity check */ + if (urb == NULL || serial == NULL) { + D1("serial = NULL"); + return; + } + + /* Push data to tty */ + if (tty && urb->actual_length) { + D1("data to push to tty"); + tty_insert_flip_string(tty, urb->transfer_buffer, + urb->actual_length); + tty_flip_buffer_push(tty); + } +} + +/* read callback for Diag and CS port */ +static void hso_std_serial_read_bulk_callback(struct urb *urb) +{ + struct hso_serial *serial = urb->context; + int result; + int status = urb->status; + + /* sanity check */ + if (!serial) { + D1("serial == NULL"); + return; + } else if (status) { + log_usb_status(status, __func__); + return; + } + + D4("\n--- Got serial_read_bulk callback %02x ---", status); + D1("Actual length = %d\n", urb->actual_length); + DUMP1(urb->transfer_buffer, urb->actual_length); + + /* Anyone listening? */ + if (serial->open_count == 0) + return; + + if (status == 0) { + if (serial->parent->port_spec & HSO_INFO_CRC_BUG) { + u32 rest; + u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF }; + rest = + urb->actual_length % + serial->in_endp->wMaxPacketSize; + if (((rest == 5) || (rest == 6)) + && !memcmp(((u8 *) urb->transfer_buffer) + + urb->actual_length - 4, crc_check, 4)) { + urb->actual_length -= 4; + } + } + /* Valid data, handle RX data */ + put_rxbuf_data(urb, serial); + } else if (status == -ENOENT || status == -ECONNRESET) { + /* Unlinked - check for throttled port. */ + D2("Port %d, successfully unlinked urb", serial->minor); + } else { + D2("Port %d, status = %d for read urb", serial->minor, status); + return; + } + + usb_mark_last_busy(urb->dev); + + /* We are done with this URB, resubmit it. Prep the USB to wait for + * another frame */ + usb_fill_bulk_urb(urb, serial->parent->usb, + usb_rcvbulkpipe(serial->parent->usb, + serial->in_endp-> + bEndpointAddress & 0x7F), + urb->transfer_buffer, serial->rx_data_length, + hso_std_serial_read_bulk_callback, serial); + /* Give this to the USB subsystem so it can tell us when more data + * arrives. */ + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) { + dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d", + __func__, result); + } +} + +/* Base driver functions */ + +static void hso_log_port(struct hso_device *hso_dev) +{ + char *port_type; + char port_dev[20]; + + switch (hso_dev->port_spec & HSO_PORT_MASK) { + case HSO_PORT_CONTROL: + port_type = "Control"; + break; + case HSO_PORT_APP: + port_type = "Application"; + break; + case HSO_PORT_GPS: + port_type = "GPS"; + break; + case HSO_PORT_GPS_CONTROL: + port_type = "GPS control"; + break; + case HSO_PORT_APP2: + port_type = "Application2"; + break; + case HSO_PORT_PCSC: + port_type = "PCSC"; + break; + case HSO_PORT_DIAG: + port_type = "Diagnostic"; + break; + case HSO_PORT_DIAG2: + port_type = "Diagnostic2"; + break; + case HSO_PORT_MODEM: + port_type = "Modem"; + break; + case HSO_PORT_NETWORK: + port_type = "Network"; + break; + default: + port_type = "Unknown"; + break; + } + if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) { + sprintf(port_dev, "%s", dev2net(hso_dev)->net->name); + } else + sprintf(port_dev, "/dev/%s%d", tty_filename, + dev2ser(hso_dev)->minor); + + dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n", + port_type, port_dev); +} + +static int hso_start_net_device(struct hso_device *hso_dev) +{ + int i, result = 0; + struct hso_net *hso_net = dev2net(hso_dev); + + if (!hso_net) + return -ENODEV; + + /* send URBs for all read buffers */ + for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { + + /* Prep a receive URB */ + usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i], + hso_dev->usb, + usb_rcvbulkpipe(hso_dev->usb, + hso_net->in_endp-> + bEndpointAddress & 0x7F), + hso_net->mux_bulk_rx_buf_pool[i], + MUX_BULK_RX_BUF_SIZE, read_bulk_callback, + hso_net); + + /* Put it out there so the device can send us stuff */ + result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i], + GFP_NOIO); + if (result) + dev_warn(&hso_dev->usb->dev, + "%s failed mux_bulk_rx_urb[%d] %d\n", __func__, + i, result); + } + + return result; +} + +static int hso_stop_net_device(struct hso_device *hso_dev) +{ + int i; + struct hso_net *hso_net = dev2net(hso_dev); + + if (!hso_net) + return -ENODEV; + + for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { + if (hso_net->mux_bulk_rx_urb_pool[i]) + usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]); + + } + if (hso_net->mux_bulk_tx_urb) + usb_kill_urb(hso_net->mux_bulk_tx_urb); + + return 0; +} + +static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags) +{ + int i, result = 0; + struct hso_serial *serial = dev2ser(hso_dev); + + if (!serial) + return -ENODEV; + + /* If it is not the MUX port fill in and submit a bulk urb (already + * allocated in hso_serial_start) */ + if (!(serial->parent->port_spec & HSO_INTF_MUX)) { + for (i = 0; i < serial->num_rx_urbs; i++) { + usb_fill_bulk_urb(serial->rx_urb[i], + serial->parent->usb, + usb_rcvbulkpipe(serial->parent->usb, + serial->in_endp-> + bEndpointAddress & + 0x7F), + serial->rx_data[i], + serial->rx_data_length, + hso_std_serial_read_bulk_callback, + serial); + result = usb_submit_urb(serial->rx_urb[i], flags); + if (result) { + dev_warn(&serial->parent->usb->dev, + "Failed to submit urb - res %d\n", + result); + break; + } + } + } else { + mutex_lock(&serial->shared_int->shared_int_lock); + if (!serial->shared_int->use_count) { + result = + hso_mux_submit_intr_urb(serial->shared_int, + hso_dev->usb, flags); + } + serial->shared_int->use_count++; + mutex_unlock(&serial->shared_int->shared_int_lock); + } + + return result; +} + +static int hso_stop_serial_device(struct hso_device *hso_dev) +{ + int i; + struct hso_serial *serial = dev2ser(hso_dev); + + if (!serial) + return -ENODEV; + + for (i = 0; i < serial->num_rx_urbs; i++) { + if (serial->rx_urb[i]) + usb_kill_urb(serial->rx_urb[i]); + } + + if (serial->tx_urb) + usb_kill_urb(serial->tx_urb); + + if (serial->shared_int) { + mutex_lock(&serial->shared_int->shared_int_lock); + if (serial->shared_int->use_count && + (--serial->shared_int->use_count == 0)) { + struct urb *urb; + + urb = serial->shared_int->shared_intr_urb; + if (urb) + usb_kill_urb(urb); + } + mutex_unlock(&serial->shared_int->shared_int_lock); + } + + return 0; +} + +static void hso_serial_common_free(struct hso_serial *serial) +{ + int i; + + if (serial->parent->dev) + device_remove_file(serial->parent->dev, &dev_attr_hsotype); + + tty_unregister_device(tty_drv, serial->minor); + + for (i = 0; i < serial->num_rx_urbs; i++) { + /* unlink and free RX URB */ + usb_free_urb(serial->rx_urb[i]); + /* free the RX buffer */ + kfree(serial->rx_data[i]); + } + + /* unlink and free TX URB */ + usb_free_urb(serial->tx_urb); + kfree(serial->tx_data); +} + +static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, + int rx_size, int tx_size) +{ + struct device *dev; + int minor; + int i; + + minor = get_free_serial_index(); + if (minor < 0) + goto exit; + + /* register our minor number */ + serial->parent->dev = tty_register_device(tty_drv, minor, + &serial->parent->interface->dev); + dev = serial->parent->dev; + dev->driver_data = serial->parent; + i = device_create_file(dev, &dev_attr_hsotype); + + /* fill in specific data for later use */ + serial->minor = minor; + serial->magic = HSO_SERIAL_MAGIC; + spin_lock_init(&serial->serial_lock); + serial->num_rx_urbs = num_urbs; + + /* RX, allocate urb and initialize */ + + /* prepare our RX buffer */ + serial->rx_data_length = rx_size; + for (i = 0; i < serial->num_rx_urbs; i++) { + serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!serial->rx_urb[i]) { + dev_err(dev, "Could not allocate urb?\n"); + goto exit; + } + serial->rx_urb[i]->transfer_buffer = NULL; + serial->rx_urb[i]->transfer_buffer_length = 0; + serial->rx_data[i] = kzalloc(serial->rx_data_length, + GFP_KERNEL); + if (!serial->rx_data[i]) { + dev_err(dev, "%s - Out of memory\n", __func__); + goto exit; + } + } + + /* TX, allocate urb and initialize */ + serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!serial->tx_urb) { + dev_err(dev, "Could not allocate urb?\n"); + goto exit; + } + serial->tx_urb->transfer_buffer = NULL; + serial->tx_urb->transfer_buffer_length = 0; + /* prepare our TX buffer */ + serial->tx_data_count = 0; + serial->tx_buffer_count = 0; + serial->tx_data_length = tx_size; + serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL); + if (!serial->tx_data) { + dev_err(dev, "%s - Out of memory", __func__); + goto exit; + } + serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL); + if (!serial->tx_buffer) { + dev_err(dev, "%s - Out of memory", __func__); + goto exit; + } + + return 0; +exit: + hso_serial_common_free(serial); + return -1; +} + +/* Frees a general hso device */ +static void hso_free_device(struct hso_device *hso_dev) +{ + kfree(hso_dev); +} + +/* Creates a general hso device */ +static struct hso_device *hso_create_device(struct usb_interface *intf, + int port_spec) +{ + struct hso_device *hso_dev; + + hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC); + if (!hso_dev) + return NULL; + + hso_dev->port_spec = port_spec; + hso_dev->usb = interface_to_usbdev(intf); + hso_dev->interface = intf; + kref_init(&hso_dev->ref); + mutex_init(&hso_dev->mutex); + + INIT_WORK(&hso_dev->async_get_intf, async_get_intf); + INIT_WORK(&hso_dev->async_put_intf, async_put_intf); + + return hso_dev; +} + +/* Removes a network device in the network device table */ +static int remove_net_device(struct hso_device *hso_dev) +{ + int i; + + for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { + if (network_table[i] == hso_dev) { + network_table[i] = NULL; + break; + } + } + if (i == HSO_MAX_NET_DEVICES) + return -1; + return 0; +} + +/* Frees our network device */ +static void hso_free_net_device(struct hso_device *hso_dev) +{ + int i; + struct hso_net *hso_net = dev2net(hso_dev); + + if (!hso_net) + return; + + /* start freeing */ + for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { + usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]); + kfree(hso_net->mux_bulk_rx_buf_pool[i]); + } + usb_free_urb(hso_net->mux_bulk_tx_urb); + kfree(hso_net->mux_bulk_tx_buf); + + remove_net_device(hso_net->parent); + + if (hso_net->net) { + unregister_netdev(hso_net->net); + free_netdev(hso_net->net); + } + + hso_free_device(hso_dev); +} + +/* initialize the network interface */ +static void hso_net_init(struct net_device *net) +{ + struct hso_net *hso_net = netdev_priv(net); + + D1("sizeof hso_net is %d", (int)sizeof(*hso_net)); + + /* fill in the other fields */ + net->open = hso_net_open; + net->stop = hso_net_close; + net->hard_start_xmit = hso_net_start_xmit; + net->tx_timeout = hso_net_tx_timeout; + net->watchdog_timeo = HSO_NET_TX_TIMEOUT; + net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; + net->type = ARPHRD_NONE; + net->mtu = DEFAULT_MTU - 14; + net->tx_queue_len = 10; + SET_ETHTOOL_OPS(net, &ops); + + /* and initialize the semaphore */ + spin_lock_init(&hso_net->net_lock); +} + +/* Adds a network device in the network device table */ +static int add_net_device(struct hso_device *hso_dev) +{ + int i; + + for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { + if (network_table[i] == NULL) { + network_table[i] = hso_dev; + break; + } + } + if (i == HSO_MAX_NET_DEVICES) + return -1; + return 0; +} + +static int hso_radio_toggle(void *data, enum rfkill_state state) +{ + struct hso_device *hso_dev = data; + int enabled = (state == RFKILL_STATE_ON); + int rv; + + mutex_lock(&hso_dev->mutex); + if (hso_dev->usb_gone) + rv = 0; + else + rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0), + enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + mutex_unlock(&hso_dev->mutex); + return rv; +} + +/* Creates and sets up everything for rfkill */ +static void hso_create_rfkill(struct hso_device *hso_dev, + struct usb_interface *interface) +{ + struct hso_net *hso_net = dev2net(hso_dev); + struct device *dev = hso_dev->dev; + char *rfkn; + + hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev, + RFKILL_TYPE_WLAN); + if (!hso_net->rfkill) { + dev_err(dev, "%s - Out of memory", __func__); + return; + } + rfkn = kzalloc(20, GFP_KERNEL); + if (!rfkn) { + rfkill_free(hso_net->rfkill); + dev_err(dev, "%s - Out of memory", __func__); + return; + } + snprintf(rfkn, 20, "hso-%d", + interface->altsetting->desc.bInterfaceNumber); + hso_net->rfkill->name = rfkn; + hso_net->rfkill->state = RFKILL_STATE_ON; + hso_net->rfkill->data = hso_dev; + hso_net->rfkill->toggle_radio = hso_radio_toggle; + if (rfkill_register(hso_net->rfkill) < 0) { + kfree(rfkn); + hso_net->rfkill->name = NULL; + rfkill_free(hso_net->rfkill); + dev_err(dev, "%s - Failed to register rfkill", __func__); + return; + } +} + +/* Creates our network device */ +static struct hso_device *hso_create_net_device(struct usb_interface *interface) +{ + int result, i; + struct net_device *net; + struct hso_net *hso_net; + struct hso_device *hso_dev; + + hso_dev = hso_create_device(interface, HSO_INTF_MUX | HSO_PORT_NETWORK); + if (!hso_dev) + return NULL; + + /* allocate our network device, then we can put in our private data */ + /* call hso_net_init to do the basic initialization */ + net = alloc_netdev(sizeof(struct hso_net), "hso%d", hso_net_init); + if (!net) { + dev_err(&interface->dev, "Unable to create ethernet device\n"); + goto exit; + } + + hso_net = netdev_priv(net); + + hso_dev->port_data.dev_net = hso_net; + hso_net->net = net; + hso_net->parent = hso_dev; + + hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, + USB_DIR_IN); + if (!hso_net->in_endp) { + dev_err(&interface->dev, "Can't find BULK IN endpoint\n"); + goto exit; + } + hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, + USB_DIR_OUT); + if (!hso_net->out_endp) { + dev_err(&interface->dev, "Can't find BULK OUT endpoint\n"); + goto exit; + } + SET_NETDEV_DEV(net, &interface->dev); + + /* registering our net device */ + result = register_netdev(net); + if (result) { + dev_err(&interface->dev, "Failed to register device\n"); + goto exit; + } + + /* start allocating */ + for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { + hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!hso_net->mux_bulk_rx_urb_pool[i]) { + dev_err(&interface->dev, "Could not allocate rx urb\n"); + goto exit; + } + hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE, + GFP_KERNEL); + if (!hso_net->mux_bulk_rx_buf_pool[i]) { + dev_err(&interface->dev, "Could not allocate rx buf\n"); + goto exit; + } + } + hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!hso_net->mux_bulk_tx_urb) { + dev_err(&interface->dev, "Could not allocate tx urb\n"); + goto exit; + } + hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL); + if (!hso_net->mux_bulk_tx_buf) { + dev_err(&interface->dev, "Could not allocate tx buf\n"); + goto exit; + } + + add_net_device(hso_dev); + + hso_log_port(hso_dev); + + hso_create_rfkill(hso_dev, interface); + + return hso_dev; +exit: + hso_free_net_device(hso_dev); + return NULL; +} + +/* Frees an AT channel ( goes for both mux and non-mux ) */ +static void hso_free_serial_device(struct hso_device *hso_dev) +{ + struct hso_serial *serial = dev2ser(hso_dev); + + if (!serial) + return; + set_serial_by_index(serial->minor, NULL); + + hso_serial_common_free(serial); + + if (serial->shared_int) { + mutex_lock(&serial->shared_int->shared_int_lock); + if (--serial->shared_int->ref_count == 0) + hso_free_shared_int(serial->shared_int); + else + mutex_unlock(&serial->shared_int->shared_int_lock); + } + kfree(serial); + hso_free_device(hso_dev); +} + +/* Creates a bulk AT channel */ +static struct hso_device *hso_create_bulk_serial_device( + struct usb_interface *interface, int port) +{ + struct hso_device *hso_dev; + struct hso_serial *serial; + int num_urbs; + + hso_dev = hso_create_device(interface, port); + if (!hso_dev) + return NULL; + + serial = kzalloc(sizeof(*serial), GFP_KERNEL); + if (!serial) + goto exit; + + serial->parent = hso_dev; + hso_dev->port_data.dev_serial = serial; + + if (port & HSO_PORT_MODEM) + num_urbs = 2; + else + num_urbs = 1; + + if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE, + BULK_URB_TX_SIZE)) + goto exit; + + serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, + USB_DIR_IN); + if (!serial->in_endp) { + dev_err(&interface->dev, "Failed to find BULK IN ep\n"); + goto exit; + } + + if (! + (serial->out_endp = + hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) { + dev_err(&interface->dev, "Failed to find BULK IN ep\n"); + goto exit; + } + + serial->write_data = hso_std_serial_write_data; + + /* and record this serial */ + set_serial_by_index(serial->minor, serial); + + /* setup the proc dirs and files if needed */ + hso_log_port(hso_dev); + + /* done, return it */ + return hso_dev; +exit: + if (hso_dev && serial) + hso_serial_common_free(serial); + kfree(serial); + hso_free_device(hso_dev); + return NULL; +} + +/* Creates a multiplexed AT channel */ +static +struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, + int port, + struct hso_shared_int *mux) +{ + struct hso_device *hso_dev; + struct hso_serial *serial; + int port_spec; + + port_spec = HSO_INTF_MUX; + port_spec &= ~HSO_PORT_MASK; + + port_spec |= hso_mux_to_port(port); + if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT) + return NULL; + + hso_dev = hso_create_device(interface, port_spec); + if (!hso_dev) + return NULL; + + serial = kzalloc(sizeof(*serial), GFP_KERNEL); + if (!serial) + goto exit; + + hso_dev->port_data.dev_serial = serial; + serial->parent = hso_dev; + + if (hso_serial_common_create + (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE)) + goto exit; + + serial->tx_data_length--; + serial->write_data = hso_mux_serial_write_data; + + serial->shared_int = mux; + mutex_lock(&serial->shared_int->shared_int_lock); + serial->shared_int->ref_count++; + mutex_unlock(&serial->shared_int->shared_int_lock); + + /* and record this serial */ + set_serial_by_index(serial->minor, serial); + + /* setup the proc dirs and files if needed */ + hso_log_port(hso_dev); + + /* done, return it */ + return hso_dev; + +exit: + if (serial) { + tty_unregister_device(tty_drv, serial->minor); + kfree(serial); + } + if (hso_dev) + hso_free_device(hso_dev); + return NULL; + +} + +static void hso_free_shared_int(struct hso_shared_int *mux) +{ + usb_free_urb(mux->shared_intr_urb); + kfree(mux->shared_intr_buf); + mutex_unlock(&mux->shared_int_lock); + kfree(mux); +} + +static +struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface) +{ + struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL); + + if (!mux) + return NULL; + + mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT, + USB_DIR_IN); + if (!mux->intr_endp) { + dev_err(&interface->dev, "Can't find INT IN endpoint\n"); + goto exit; + } + + mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!mux->shared_intr_urb) { + dev_err(&interface->dev, "Could not allocate intr urb?"); + goto exit; + } + mux->shared_intr_buf = kzalloc(mux->intr_endp->wMaxPacketSize, + GFP_KERNEL); + if (!mux->shared_intr_buf) { + dev_err(&interface->dev, "Could not allocate intr buf?"); + goto exit; + } + + mutex_init(&mux->shared_int_lock); + + return mux; + +exit: + kfree(mux->shared_intr_buf); + usb_free_urb(mux->shared_intr_urb); + kfree(mux); + return NULL; +} + +/* Gets the port spec for a certain interface */ +static int hso_get_config_data(struct usb_interface *interface) +{ + struct usb_device *usbdev = interface_to_usbdev(interface); + u8 config_data[17]; + u32 if_num = interface->altsetting->desc.bInterfaceNumber; + s32 result; + + if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), + 0x86, 0xC0, 0, 0, config_data, 17, + USB_CTRL_SET_TIMEOUT) != 0x11) { + return -EIO; + } + + switch (config_data[if_num]) { + case 0x0: + result = 0; + break; + case 0x1: + result = HSO_PORT_DIAG; + break; + case 0x2: + result = HSO_PORT_GPS; + break; + case 0x3: + result = HSO_PORT_GPS_CONTROL; + break; + case 0x4: + result = HSO_PORT_APP; + break; + case 0x5: + result = HSO_PORT_APP2; + break; + case 0x6: + result = HSO_PORT_CONTROL; + break; + case 0x7: + result = HSO_PORT_NETWORK; + break; + case 0x8: + result = HSO_PORT_MODEM; + break; + case 0x9: + result = HSO_PORT_MSD; + break; + case 0xa: + result = HSO_PORT_PCSC; + break; + case 0xb: + result = HSO_PORT_VOICE; + break; + default: + result = 0; + } + + if (result) + result |= HSO_INTF_BULK; + + if (config_data[16] & 0x1) + result |= HSO_INFO_CRC_BUG; + + return result; +} + +/* called once for each interface upon device insertion */ +static int hso_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + int mux, i, if_num, port_spec; + unsigned char port_mask; + struct hso_device *hso_dev = NULL; + struct hso_shared_int *shared_int; + struct hso_device *tmp_dev = NULL; + + if_num = interface->altsetting->desc.bInterfaceNumber; + + /* Get the interface/port specification from either driver_info or from + * the device itself */ + if (id->driver_info) + port_spec = ((u32 *)(id->driver_info))[if_num]; + else + port_spec = hso_get_config_data(interface); + + if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) { + dev_err(&interface->dev, "Not our interface\n"); + return -ENODEV; + } + /* Check if we need to switch to alt interfaces prior to port + * configuration */ + if (interface->num_altsetting > 1) + usb_set_interface(interface_to_usbdev(interface), if_num, 1); + interface->needs_remote_wakeup = 1; + + /* Allocate new hso device(s) */ + switch (port_spec & HSO_INTF_MASK) { + case HSO_INTF_MUX: + if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) { + /* Create the network device */ + if (!disable_net) { + hso_dev = hso_create_net_device(interface); + if (!hso_dev) + goto exit; + tmp_dev = hso_dev; + } + } + + if (hso_get_mux_ports(interface, &port_mask)) + /* TODO: de-allocate everything */ + goto exit; + + shared_int = hso_create_shared_int(interface); + if (!shared_int) + goto exit; + + for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) { + if (port_mask & i) { + hso_dev = hso_create_mux_serial_device( + interface, i, shared_int); + if (!hso_dev) + goto exit; + } + } + + if (tmp_dev) + hso_dev = tmp_dev; + break; + + case HSO_INTF_BULK: + /* It's a regular bulk interface */ + if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) + && !disable_net) + hso_dev = hso_create_net_device(interface); + else + hso_dev = + hso_create_bulk_serial_device(interface, port_spec); + if (!hso_dev) + goto exit; + break; + default: + goto exit; + } + + usb_driver_claim_interface(&hso_driver, interface, hso_dev); + + /* save our data pointer in this device */ + usb_set_intfdata(interface, hso_dev); + + /* done */ + return 0; +exit: + hso_free_interface(interface); + return -ENODEV; +} + +/* device removed, cleaning up */ +static void hso_disconnect(struct usb_interface *interface) +{ + hso_free_interface(interface); + + /* remove reference of our private data */ + usb_set_intfdata(interface, NULL); + + usb_driver_release_interface(&hso_driver, interface); +} + +static void async_get_intf(struct work_struct *data) +{ + struct hso_device *hso_dev = + container_of(data, struct hso_device, async_get_intf); + usb_autopm_get_interface(hso_dev->interface); +} + +static void async_put_intf(struct work_struct *data) +{ + struct hso_device *hso_dev = + container_of(data, struct hso_device, async_put_intf); + usb_autopm_put_interface(hso_dev->interface); +} + +static int hso_get_activity(struct hso_device *hso_dev) +{ + if (hso_dev->usb->state == USB_STATE_SUSPENDED) { + if (!hso_dev->is_active) { + hso_dev->is_active = 1; + schedule_work(&hso_dev->async_get_intf); + } + } + + if (hso_dev->usb->state != USB_STATE_CONFIGURED) + return -EAGAIN; + + usb_mark_last_busy(hso_dev->usb); + + return 0; +} + +static int hso_put_activity(struct hso_device *hso_dev) +{ + if (hso_dev->usb->state != USB_STATE_SUSPENDED) { + if (hso_dev->is_active) { + hso_dev->is_active = 0; + schedule_work(&hso_dev->async_put_intf); + return -EAGAIN; + } + } + hso_dev->is_active = 0; + return 0; +} + +/* called by kernel when we need to suspend device */ +static int hso_suspend(struct usb_interface *iface, pm_message_t message) +{ + int i, result; + + /* Stop all serial ports */ + for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { + if (serial_table[i] && (serial_table[i]->interface == iface)) { + result = hso_stop_serial_device(serial_table[i]); + if (result) + goto out; + } + } + + /* Stop all network ports */ + for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { + if (network_table[i] && + (network_table[i]->interface == iface)) { + result = hso_stop_net_device(network_table[i]); + if (result) + goto out; + } + } + +out: + return 0; +} + +/* called by kernel when we need to resume device */ +static int hso_resume(struct usb_interface *iface) +{ + int i, result = 0; + struct hso_net *hso_net; + + /* Start all serial ports */ + for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { + if (serial_table[i] && (serial_table[i]->interface == iface)) { + if (dev2ser(serial_table[i])->open_count) { + result = + hso_start_serial_device(serial_table[i], GFP_NOIO); + hso_kick_transmit(dev2ser(serial_table[i])); + if (result) + goto out; + } + } + } + + /* Start all network ports */ + for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { + if (network_table[i] && + (network_table[i]->interface == iface)) { + hso_net = dev2net(network_table[i]); + /* First transmit any lingering data, then restart the + * device. */ + if (hso_net->skb_tx_buf) { + dev_dbg(&iface->dev, + "Transmitting lingering data\n"); + hso_net_start_xmit(hso_net->skb_tx_buf, + hso_net->net); + } + result = hso_start_net_device(network_table[i]); + if (result) + goto out; + } + } + +out: + return result; +} + +static void hso_serial_ref_free(struct kref *ref) +{ + struct hso_device *hso_dev = container_of(ref, struct hso_device, ref); + + hso_free_serial_device(hso_dev); +} + +static void hso_free_interface(struct usb_interface *interface) +{ + struct hso_serial *hso_dev; + int i; + + for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { + if (serial_table[i] + && (serial_table[i]->interface == interface)) { + hso_dev = dev2ser(serial_table[i]); + if (hso_dev->tty) + tty_hangup(hso_dev->tty); + mutex_lock(&hso_dev->parent->mutex); + hso_dev->parent->usb_gone = 1; + mutex_unlock(&hso_dev->parent->mutex); + kref_put(&serial_table[i]->ref, hso_serial_ref_free); + } + } + + for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { + if (network_table[i] + && (network_table[i]->interface == interface)) { + struct rfkill *rfk = dev2net(network_table[i])->rfkill; + /* hso_stop_net_device doesn't stop the net queue since + * traffic needs to start it again when suspended */ + netif_stop_queue(dev2net(network_table[i])->net); + hso_stop_net_device(network_table[i]); + cancel_work_sync(&network_table[i]->async_put_intf); + cancel_work_sync(&network_table[i]->async_get_intf); + if(rfk) + rfkill_unregister(rfk); + hso_free_net_device(network_table[i]); + } + } +} + +/* Helper functions */ + +/* Get the endpoint ! */ +static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf, + int type, int dir) +{ + int i; + struct usb_host_interface *iface = intf->cur_altsetting; + struct usb_endpoint_descriptor *endp; + + for (i = 0; i < iface->desc.bNumEndpoints; i++) { + endp = &iface->endpoint[i].desc; + if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) && + ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == type)) + return endp; + } + + return NULL; +} + +/* Get the byte that describes which ports are enabled */ +static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports) +{ + int i; + struct usb_host_interface *iface = intf->cur_altsetting; + + if (iface->extralen == 3) { + *ports = iface->extra[2]; + return 0; + } + + for (i = 0; i < iface->desc.bNumEndpoints; i++) { + if (iface->endpoint[i].extralen == 3) { + *ports = iface->endpoint[i].extra[2]; + return 0; + } + } + + return -1; +} + +/* interrupt urb needs to be submitted, used for serial read of muxed port */ +static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int, + struct usb_device *usb, gfp_t gfp) +{ + int result; + + usb_fill_int_urb(shared_int->shared_intr_urb, usb, + usb_rcvintpipe(usb, + shared_int->intr_endp->bEndpointAddress & 0x7F), + shared_int->shared_intr_buf, + shared_int->intr_endp->wMaxPacketSize, + intr_callback, shared_int, + shared_int->intr_endp->bInterval); + + result = usb_submit_urb(shared_int->shared_intr_urb, gfp); + if (result) + dev_warn(&usb->dev, "%s failed mux_intr_urb %d", __func__, + result); + + return result; +} + +/* operations setup of the serial interface */ +static struct tty_operations hso_serial_ops = { + .open = hso_serial_open, + .close = hso_serial_close, + .write = hso_serial_write, + .write_room = hso_serial_write_room, + .set_termios = hso_serial_set_termios, + .chars_in_buffer = hso_serial_chars_in_buffer, + .tiocmget = hso_serial_tiocmget, + .tiocmset = hso_serial_tiocmset, +}; + +static struct usb_driver hso_driver = { + .name = driver_name, + .probe = hso_probe, + .disconnect = hso_disconnect, + .id_table = hso_ids, + .suspend = hso_suspend, + .resume = hso_resume, + .supports_autosuspend = 1, +}; + +static int __init hso_init(void) +{ + int i; + int result; + + /* put it in the log */ + printk(KERN_INFO "hso: %s\n", version); + + /* Initialise the serial table semaphore and table */ + spin_lock_init(&serial_table_lock); + for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) + serial_table[i] = NULL; + + /* allocate our driver using the proper amount of supported minors */ + tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS); + if (!tty_drv) + return -ENOMEM; + + /* fill in all needed values */ + tty_drv->magic = TTY_DRIVER_MAGIC; + tty_drv->owner = THIS_MODULE; + tty_drv->driver_name = driver_name; + tty_drv->name = tty_filename; + + /* if major number is provided as parameter, use that one */ + if (tty_major) + tty_drv->major = tty_major; + + tty_drv->minor_start = 0; + tty_drv->num = HSO_SERIAL_TTY_MINORS; + tty_drv->type = TTY_DRIVER_TYPE_SERIAL; + tty_drv->subtype = SERIAL_TYPE_NORMAL; + tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_drv->init_termios = tty_std_termios; + tty_drv->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + tty_drv->termios = hso_serial_termios; + tty_drv->termios_locked = hso_serial_termios_locked; + tty_set_operations(tty_drv, &hso_serial_ops); + + /* register the tty driver */ + result = tty_register_driver(tty_drv); + if (result) { + printk(KERN_ERR "%s - tty_register_driver failed(%d)\n", + __func__, result); + return result; + } + + /* register this module as an usb driver */ + result = usb_register(&hso_driver); + if (result) { + printk(KERN_ERR "Could not register hso driver? error: %d\n", + result); + /* cleanup serial interface */ + tty_unregister_driver(tty_drv); + return result; + } + + /* done */ + return 0; +} + +static void __exit hso_exit(void) +{ + printk(KERN_INFO "hso: unloaded\n"); + + tty_unregister_driver(tty_drv); + /* deregister the usb driver */ + usb_deregister(&hso_driver); +} + +/* Module definitions */ +module_init(hso_init); +module_exit(hso_exit); + +MODULE_AUTHOR(MOD_AUTHOR); +MODULE_DESCRIPTION(MOD_DESCRIPTION); +MODULE_LICENSE(MOD_LICENSE); +MODULE_INFO(Version, DRIVER_VERSION); + +/* change the debug level (eg: insmod hso.ko debug=0x04) */ +MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]"); +module_param(debug, int, S_IRUGO | S_IWUSR); + +/* set the major tty number (eg: insmod hso.ko tty_major=245) */ +MODULE_PARM_DESC(tty_major, "Set the major tty number"); +module_param(tty_major, int, S_IRUGO | S_IWUSR); + +/* disable network interface (eg: insmod hso.ko disable_net=1) */ +MODULE_PARM_DESC(disable_net, "Disable the network interface"); +module_param(disable_net, int, S_IRUGO | S_IWUSR); |
