summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/configs/86xx/gef_ppc9a_defconfig1
-rw-r--r--arch/powerpc/configs/86xx/gef_sbc310_defconfig1
-rw-r--r--arch/powerpc/configs/86xx/gef_sbc610_defconfig2
-rw-r--r--arch/powerpc/platforms/86xx/Makefile3
-rw-r--r--drivers/gpio/Kconfig11
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-ge.c (renamed from arch/powerpc/platforms/86xx/gef_gpio.c)2
7 files changed, 18 insertions, 3 deletions
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index d41857a5152d..da731c2fe984 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -131,6 +131,7 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index 38303ec11bcd..2149360a1e62 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -132,6 +132,7 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 98533973d20f..af2e8e1edba6 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -183,6 +183,8 @@ CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index ac6a50fdd1d1..1ee6ca8e53f7 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -7,8 +7,7 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
obj-$(CONFIG_SBC8641D) += sbc8641d.o
obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
-gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o
-obj-$(CONFIG_GE_FPGA) += gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GE_FPGA) += gef_pic.o
obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o
obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o
obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d0c41188d4e5..0409cf35adda 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -190,6 +190,17 @@ config GPIO_VX855
additional drivers must be enabled in order to use the
functionality of the device.
+config GPIO_GE_FPGA
+ bool "GE FPGA based GPIO"
+ depends on GE_FPGA
+ help
+ Support for common GPIO functionality provided on some GE Single Board
+ Computers.
+
+ This driver provides basic support (configure as input or output, read
+ and write pin state) for GPIO implemented in a number of GE single
+ board computers.
+
comment "I2C GPIO expanders:"
config GPIO_MAX7300
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fa10df604c01..9a8fb54ae462 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
+obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/drivers/gpio/gpio-ge.c
index 2a703365e664..f8e628952921 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/drivers/gpio/gpio-ge.c
@@ -14,7 +14,7 @@
*
* Configuration of output modes (totem-pole/open-drain)
* Interrupt configuration - interrupts are always generated the FPGA relies on
- * the I/O interrupt controllers mask to stop them propergating
+ * the I/O interrupt controllers mask to stop them propergating
*/
#include <linux/kernel.h>
OpenPOWER on IntegriCloud