diff options
| -rw-r--r-- | include/sound/omap-hdmi-audio.h | 43 | ||||
| -rw-r--r-- | sound/soc/omap/Kconfig | 15 | ||||
| -rw-r--r-- | sound/soc/omap/Makefile | 2 | ||||
| -rw-r--r-- | sound/soc/omap/omap-hdmi-audio.c | 407 |
4 files changed, 467 insertions, 0 deletions
diff --git a/include/sound/omap-hdmi-audio.h b/include/sound/omap-hdmi-audio.h new file mode 100644 index 000000000000..afdb416898e0 --- /dev/null +++ b/include/sound/omap-hdmi-audio.h @@ -0,0 +1,43 @@ +/* + * hdmi-audio.c -- OMAP4+ DSS HDMI audio support library + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Jyri Sarha <jsarha@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include <video/omapdss.h> + +#ifndef __OMAP_HDMI_AUDIO_H__ +#define __OMAP_HDMI_AUDIO_H__ + +struct omap_hdmi_audio_ops { + int (*audio_startup)(struct device *dev, + void (*abort_cb)(struct device *dev)); + int (*audio_shutdown)(struct device *dev); + int (*audio_start)(struct device *dev); + void (*audio_stop)(struct device *dev); + int (*audio_config)(struct device *dev, + struct omap_dss_audio *dss_audio); +}; + +/* HDMI audio initalization data */ +struct omap_hdmi_audio_pdata { + struct device *dev; + enum omapdss_version dss_version; + phys_addr_t audio_dma_addr; + + const struct omap_hdmi_audio_ops *ops; +}; + +#endif /* __OMAP_HDMI_AUDIO_H__ */ diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index d44463a7b0fa..2b32b3e58bf1 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -15,6 +15,21 @@ config SND_OMAP_SOC_MCPDM config SND_OMAP_SOC_HDMI tristate +config SND_OMAP_SOC_HDMI_AUDIO + tristate "HDMI audio support for OMAP4+ based SoCs" + depends on SND_OMAP_SOC + help + For HDMI audio to work OMAPDSS HDMI support should be + enabled. + The hdmi audio driver implements cpu-dai component using the + callbacks provided by OMAPDSS and registers the component + under DSS HDMI device. Omap-pcm is registered for platform + component also under DSS HDMI device. Dummy codec is used as + as codec component. The hdmi audio driver implements also + the card and registers it under its own platform device. + The device for the dirver is registered by OMAPDSS hdmi + driver. + config SND_OMAP_SOC_N810 tristate "SoC Audio support for Nokia N810" depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index a725905b2c68..40688a6e8e98 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -4,12 +4,14 @@ snd-soc-omap-dmic-objs := omap-dmic.o snd-soc-omap-mcbsp-objs := omap-mcbsp.o mcbsp.o snd-soc-omap-mcpdm-objs := omap-mcpdm.o snd-soc-omap-hdmi-objs := omap-hdmi.o +snd-soc-omap-hdmi-audio-objs := omap-hdmi-audio.o obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o obj-$(CONFIG_SND_OMAP_SOC_HDMI) += snd-soc-omap-hdmi.o +obj-$(CONFIG_SND_OMAP_SOC_HDMI_AUDIO) += snd-soc-omap-hdmi-audio.o # OMAP Machine Support snd-soc-n810-objs := n810.o diff --git a/sound/soc/omap/omap-hdmi-audio.c b/sound/soc/omap/omap-hdmi-audio.c new file mode 100644 index 000000000000..3f9ac7dbdc80 --- /dev/null +++ b/sound/soc/omap/omap-hdmi-audio.c @@ -0,0 +1,407 @@ +/* + * omap-hdmi-audio.c -- OMAP4+ DSS HDMI audio support library + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Jyri Sarha <jsarha@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <sound/soc.h> +#include <sound/pcm_params.h> +#include <sound/dmaengine_pcm.h> +#include <uapi/sound/asound.h> +#include <sound/asoundef.h> +#include <sound/omap-pcm.h> +#include <sound/omap-hdmi-audio.h> +#include <video/omapdss.h> + +#define DRV_NAME "omap-hdmi-audio" + +struct hdmi_audio_data { + struct snd_soc_card *card; + + const struct omap_hdmi_audio_ops *ops; + struct device *dssdev; + struct snd_dmaengine_dai_dma_data dma_data; + struct omap_dss_audio dss_audio; + struct snd_aes_iec958 iec; + struct snd_cea_861_aud_if cea; + + struct mutex current_stream_lock; + struct snd_pcm_substream *current_stream; +}; + +static +struct hdmi_audio_data *card_drvdata_substream(struct snd_pcm_substream *ss) +{ + struct snd_soc_pcm_runtime *rtd = ss->private_data; + + return snd_soc_card_get_drvdata(rtd->card); +} + +static void hdmi_dai_abort(struct device *dev) +{ + struct hdmi_audio_data *ad = dev_get_drvdata(dev); + + mutex_lock(&ad->current_stream_lock); + if (ad->current_stream && ad->current_stream->runtime && + snd_pcm_running(ad->current_stream)) { + dev_err(dev, "HDMI display disabled, aborting playback\n"); + snd_pcm_stream_lock_irq(ad->current_stream); + snd_pcm_stop(ad->current_stream, SNDRV_PCM_STATE_DISCONNECTED); + snd_pcm_stream_unlock_irq(ad->current_stream); + } + mutex_unlock(&ad->current_stream_lock); +} + +static int hdmi_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct hdmi_audio_data *ad = card_drvdata_substream(substream); + int ret; + /* + * Make sure that the period bytes are multiple of the DMA packet size. + * Largest packet size we use is 32 32-bit words = 128 bytes + */ + ret = snd_pcm_hw_constraint_step(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 128); + if (ret < 0) { + dev_err(dai->dev, "could not apply constraint\n"); + return ret; + } + + snd_soc_dai_set_dma_data(dai, substream, &ad->dma_data); + + mutex_lock(&ad->current_stream_lock); + ad->current_stream = substream; + mutex_unlock(&ad->current_stream_lock); + + ret = ad->ops->audio_startup(ad->dssdev, hdmi_dai_abort); + + if (ret) { + mutex_lock(&ad->current_stream_lock); + ad->current_stream = NULL; + mutex_unlock(&ad->current_stream_lock); + } + + return ret; +} + +static int hdmi_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct hdmi_audio_data *ad = card_drvdata_substream(substream); + struct snd_aes_iec958 *iec = &ad->iec; + struct snd_cea_861_aud_if *cea = &ad->cea; + + WARN_ON(ad->current_stream != substream); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + ad->dma_data.maxburst = 16; + break; + case SNDRV_PCM_FORMAT_S24_LE: + ad->dma_data.maxburst = 32; + break; + default: + dev_err(dai->dev, "format not supported!\n"); + return -EINVAL; + } + + ad->dss_audio.iec = iec; + ad->dss_audio.cea = cea; + /* + * fill the IEC-60958 channel status word + */ + /* initialize the word bytes */ + memset(iec->status, 0, sizeof(iec->status)); + + /* specify IEC-60958-3 (commercial use) */ + iec->status[0] &= ~IEC958_AES0_PROFESSIONAL; + + /* specify that the audio is LPCM*/ + iec->status[0] &= ~IEC958_AES0_NONAUDIO; + + iec->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT; + + iec->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE; + + iec->status[0] |= IEC958_AES1_PRO_MODE_NOTID; + + iec->status[1] = IEC958_AES1_CON_GENERAL; + + iec->status[2] |= IEC958_AES2_CON_SOURCE_UNSPEC; + + iec->status[2] |= IEC958_AES2_CON_CHANNEL_UNSPEC; + + switch (params_rate(params)) { + case 32000: + iec->status[3] |= IEC958_AES3_CON_FS_32000; + break; + case 44100: + iec->status[3] |= IEC958_AES3_CON_FS_44100; + break; + case 48000: + iec->status[3] |= IEC958_AES3_CON_FS_48000; + break; + case 88200: + iec->status[3] |= IEC958_AES3_CON_FS_88200; + break; + case 96000: + iec->status[3] |= IEC958_AES3_CON_FS_96000; + break; + case 176400: + iec->status[3] |= IEC958_AES3_CON_FS_176400; + break; + case 192000: + iec->status[3] |= IEC958_AES3_CON_FS_192000; + break; + default: + dev_err(dai->dev, "rate not supported!\n"); + return -EINVAL; + } + + /* specify the clock accuracy */ + iec->status[3] |= IEC958_AES3_CON_CLOCK_1000PPM; + + /* + * specify the word length. The same word length value can mean + * two different lengths. Hence, we need to specify the maximum + * word length as well. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + iec->status[4] |= IEC958_AES4_CON_WORDLEN_20_16; + iec->status[4] &= ~IEC958_AES4_CON_MAX_WORDLEN_24; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iec->status[4] |= IEC958_AES4_CON_WORDLEN_24_20; + iec->status[4] |= IEC958_AES4_CON_MAX_WORDLEN_24; + break; + default: + dev_err(dai->dev, "format not supported!\n"); + return -EINVAL; + } + + /* + * Fill the CEA-861 audio infoframe (see spec for details) + */ + + cea->db1_ct_cc = (params_channels(params) - 1) + & CEA861_AUDIO_INFOFRAME_DB1CC; + cea->db1_ct_cc |= CEA861_AUDIO_INFOFRAME_DB1CT_FROM_STREAM; + + cea->db2_sf_ss = CEA861_AUDIO_INFOFRAME_DB2SF_FROM_STREAM; + cea->db2_sf_ss |= CEA861_AUDIO_INFOFRAME_DB2SS_FROM_STREAM; + + cea->db3 = 0; /* not used, all zeros */ + + /* + * The OMAP HDMI IP requires to use the 8-channel channel code when + * transmitting more than two channels. + */ + if (params_channels(params) == 2) + cea->db4_ca = 0x0; + else + cea->db4_ca = 0x13; + + cea->db5_dminh_lsv = CEA861_AUDIO_INFOFRAME_DB5_DM_INH_PROHIBITED; + /* the expression is trivial but makes clear what we are doing */ + cea->db5_dminh_lsv |= (0 & CEA861_AUDIO_INFOFRAME_DB5_LSV); + + return ad->ops->audio_config(ad->dssdev, &ad->dss_audio); +} + +static int hdmi_dai_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct hdmi_audio_data *ad = card_drvdata_substream(substream); + int err = 0; + + WARN_ON(ad->current_stream != substream); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + err = ad->ops->audio_start(ad->dssdev); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ad->ops->audio_stop(ad->dssdev); + break; + default: + err = -EINVAL; + } + return err; +} + +static void hdmi_dai_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct hdmi_audio_data *ad = card_drvdata_substream(substream); + + WARN_ON(ad->current_stream != substream); + + ad->ops->audio_shutdown(ad->dssdev); + + mutex_lock(&ad->current_stream_lock); + ad->current_stream = NULL; + mutex_unlock(&ad->current_stream_lock); +} + +static const struct snd_soc_dai_ops hdmi_dai_ops = { + .startup = hdmi_dai_startup, + .hw_params = hdmi_dai_hw_params, + .trigger = hdmi_dai_trigger, + .shutdown = hdmi_dai_shutdown, +}; + +static const struct snd_soc_component_driver omap_hdmi_component = { + .name = "omapdss_hdmi", +}; + +static struct snd_soc_dai_driver omap5_hdmi_dai = { + .name = "omap5-hdmi-dai", + .playback = { + .channels_min = 2, + .channels_max = 8, + .rates = (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .ops = &hdmi_dai_ops, +}; + +static struct snd_soc_dai_driver omap4_hdmi_dai = { + .name = "omap4-hdmi-dai", + .playback = { + .channels_min = 2, + .channels_max = 8, + .rates = (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000), + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, + }, + .ops = &hdmi_dai_ops, +}; + +static int omap_hdmi_audio_probe(struct platform_device *pdev) +{ + struct omap_hdmi_audio_pdata *ha = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct hdmi_audio_data *ad; + struct snd_soc_dai_driver *dai_drv; + struct snd_soc_card *card; + int ret; + + if (!ha) { + dev_err(dev, "No platform data\n"); + return -EINVAL; + } + + ad = devm_kzalloc(dev, sizeof(*ad), GFP_KERNEL); + if (!ad) + return -ENOMEM; + ad->dssdev = ha->dev; + ad->ops = ha->ops; + ad->dma_data.addr = ha->audio_dma_addr; + ad->dma_data.filter_data = "audio_tx"; + ad->dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + mutex_init(&ad->current_stream_lock); + + switch (ha->dss_version) { + case OMAPDSS_VER_OMAP4430_ES1: + case OMAPDSS_VER_OMAP4430_ES2: + case OMAPDSS_VER_OMAP4: + dai_drv = &omap4_hdmi_dai; + break; + case OMAPDSS_VER_OMAP5: + dai_drv = &omap5_hdmi_dai; + break; + default: + return -EINVAL; + } + ret = snd_soc_register_component(ad->dssdev, &omap_hdmi_component, + dai_drv, 1); + if (ret) + return ret; + + ret = omap_pcm_platform_register(ad->dssdev); + if (ret) + return ret; + + card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL); + card->name = devm_kasprintf(dev, GFP_KERNEL, + "HDMI %s", dev_name(ad->dssdev)); + card->owner = THIS_MODULE; + card->dai_link = + devm_kzalloc(dev, sizeof(*(card->dai_link)), GFP_KERNEL); + card->dai_link->name = card->name; + card->dai_link->stream_name = card->name; + card->dai_link->cpu_dai_name = dev_name(ad->dssdev); + card->dai_link->platform_name = dev_name(ad->dssdev); + card->dai_link->codec_name = "snd-soc-dummy"; + card->dai_link->codec_dai_name = "snd-soc-dummy-dai"; + card->num_links = 1; + card->dev = dev; + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(dev, "snd_soc_register_card failed (%d)\n", ret); + snd_soc_unregister_component(ad->dssdev); + return ret; + } + + ad->card = card; + snd_soc_card_set_drvdata(card, ad); + + dev_set_drvdata(dev, ad); + + return 0; +} + +static int omap_hdmi_audio_remove(struct platform_device *pdev) +{ + struct hdmi_audio_data *ad = platform_get_drvdata(pdev); + + snd_soc_unregister_card(ad->card); + snd_soc_unregister_component(ad->dssdev); + return 0; +} + +static struct platform_driver hdmi_audio_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = omap_hdmi_audio_probe, + .remove = omap_hdmi_audio_remove, +}; + +module_platform_driver(hdmi_audio_driver); + +MODULE_AUTHOR("Jyri Sarha <jsarha@ti.com>"); +MODULE_DESCRIPTION("OMAP HDMI Audio Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); |
