diff options
| -rw-r--r-- | drivers/net/bnx2.c | 8 | ||||
| -rw-r--r-- | drivers/net/bnx2.h | 14 |
2 files changed, 11 insertions, 11 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index a52ffdc3b40a..84563b0b660e 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -1656,7 +1656,7 @@ bnx2_setup_serdes_phy(struct bnx2 *bp, u8 port) * exchanging base pages plus 3 next pages and * normally completes in about 120 msec. */ - bp->current_interval = SERDES_AN_TIMEOUT; + bp->current_interval = BNX2_SERDES_AN_TIMEOUT; bp->serdes_an_pending = 1; mod_timer(&bp->timer, jiffies + bp->current_interval); } else { @@ -2278,7 +2278,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent) return 0; /* wait for an acknowledgement. */ - for (i = 0; i < (FW_ACK_TIME_OUT_MS / 10); i++) { + for (i = 0; i < (BNX2_FW_ACK_TIME_OUT_MS / 10); i++) { msleep(10); val = bnx2_shmem_rd(bp, BNX2_FW_MB); @@ -5705,7 +5705,7 @@ bnx2_5708_serdes_timer(struct bnx2 *bp) bnx2_read_phy(bp, bp->mii_bmcr, &bmcr); if (bmcr & BMCR_ANENABLE) { bnx2_enable_forced_2g5(bp); - bp->current_interval = SERDES_FORCED_TIMEOUT; + bp->current_interval = BNX2_SERDES_FORCED_TIMEOUT; } else { bnx2_disable_forced_2g5(bp); bp->serdes_an_pending = 2; @@ -6522,7 +6522,7 @@ bnx2_nway_reset(struct net_device *dev) spin_lock_bh(&bp->phy_lock); - bp->current_interval = SERDES_AN_TIMEOUT; + bp->current_interval = BNX2_SERDES_AN_TIMEOUT; bp->serdes_an_pending = 1; mod_timer(&bp->timer, jiffies + bp->current_interval); } diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 2b9649ae6307..34ca47812af4 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6679,8 +6679,6 @@ struct bnx2_napi { struct bnx2_tx_ring_info tx_ring; }; -#define BNX2_TIMER_INTERVAL HZ - struct bnx2 { /* Fields used in the tx and intr/napi performance paths are grouped */ /* together in the beginning of the structure. */ @@ -6728,7 +6726,11 @@ struct bnx2 { /* End of fields used in the performance code paths. */ - int current_interval; + unsigned int current_interval; +#define BNX2_TIMER_INTERVAL HZ +#define BNX2_SERDES_AN_TIMEOUT (HZ / 3) +#define BNX2_SERDES_FORCED_TIMEOUT (HZ / 10) + struct timer_list timer; struct work_struct reset_task; @@ -6860,8 +6862,6 @@ struct bnx2 { #define PHY_LOOPBACK 2 u8 serdes_an_pending; -#define SERDES_AN_TIMEOUT (HZ / 3) -#define SERDES_FORCED_TIMEOUT (HZ / 10) u8 mac_addr[8]; @@ -6959,14 +6959,14 @@ struct fw_info { /* This value (in milliseconds) determines the frequency of the driver * issuing the PULSE message code. The firmware monitors this periodic * pulse to determine when to switch to an OS-absent mode. */ -#define DRV_PULSE_PERIOD_MS 250 +#define BNX2_DRV_PULSE_PERIOD_MS 250 /* This value (in milliseconds) determines how long the driver should * wait for an acknowledgement from the firmware before timing out. Once * the firmware has timed out, the driver will assume there is no firmware * running and there won't be any firmware-driver synchronization during a * driver reset. */ -#define FW_ACK_TIME_OUT_MS 1000 +#define BNX2_FW_ACK_TIME_OUT_MS 1000 #define BNX2_DRV_RESET_SIGNATURE 0x00000000 |
