summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/sky2.c43
-rw-r--r--drivers/net/sky2.h19
2 files changed, 25 insertions, 37 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 2b9272c0955a..9429859be54f 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -827,7 +827,7 @@ static void rx_set_checksum(struct sky2_port *sky2)
struct sky2_rx_le *le;
le = sky2_next_rx(sky2);
- le->addr = (ETH_HLEN << 16) | ETH_HLEN;
+ le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
le->ctrl = 0;
le->opcode = OP_TCPSTART | HW_OWNER;
@@ -1245,7 +1245,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
/* Send high bits if changed or crosses boundary */
if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
le = get_tx_le(sky2);
- le->tx.addr = cpu_to_le32(addr64);
+ le->addr = cpu_to_le32(addr64);
le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
sky2->tx_addr64 = high32(mapping + len);
@@ -1260,8 +1260,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
if (mss != sky2->tx_last_mss) {
le = get_tx_le(sky2);
- le->tx.tso.size = cpu_to_le16(mss);
- le->tx.tso.rsvd = 0;
+ le->addr = cpu_to_le32(mss);
le->opcode = OP_LRGLEN | HW_OWNER;
le->ctrl = 0;
sky2->tx_last_mss = mss;
@@ -1274,7 +1273,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
if (!le) {
le = get_tx_le(sky2);
- le->tx.addr = 0;
+ le->addr = 0;
le->opcode = OP_VLAN|HW_OWNER;
le->ctrl = 0;
} else
@@ -1286,20 +1285,21 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
/* Handle TCP checksum offload */
if (skb->ip_summed == CHECKSUM_HW) {
- u16 hdr = skb->h.raw - skb->data;
- u16 offset = hdr + skb->csum;
+ unsigned offset = skb->h.raw - skb->data;
+ u32 tcpsum;
+
+ tcpsum = offset << 16; /* sum start */
+ tcpsum |= offset + skb->csum; /* sum write */
ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
if (skb->nh.iph->protocol == IPPROTO_UDP)
ctrl |= UDPTCP;
- if (hdr != sky2->tx_csum_start || offset != sky2->tx_csum_offset) {
- sky2->tx_csum_start = hdr;
- sky2->tx_csum_offset = offset;
+ if (tcpsum != sky2->tx_tcpsum) {
+ sky2->tx_tcpsum = tcpsum;
le = get_tx_le(sky2);
- le->tx.csum.start = cpu_to_le16(hdr);
- le->tx.csum.offset = cpu_to_le16(offset);
+ le->addr = cpu_to_le32(tcpsum);
le->length = 0; /* initial checksum value */
le->ctrl = 1; /* one packet */
le->opcode = OP_TCPLISW | HW_OWNER;
@@ -1307,7 +1307,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
}
le = get_tx_le(sky2);
- le->tx.addr = cpu_to_le32((u32) mapping);
+ le->addr = cpu_to_le32((u32) mapping);
le->length = cpu_to_le16(len);
le->ctrl = ctrl;
le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
@@ -1325,14 +1325,14 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
addr64 = high32(mapping);
if (addr64 != sky2->tx_addr64) {
le = get_tx_le(sky2);
- le->tx.addr = cpu_to_le32(addr64);
+ le->addr = cpu_to_le32(addr64);
le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
sky2->tx_addr64 = addr64;
}
le = get_tx_le(sky2);
- le->tx.addr = cpu_to_le32((u32) mapping);
+ le->addr = cpu_to_le32((u32) mapping);
le->length = cpu_to_le16(frag->size);
le->ctrl = ctrl;
le->opcode = OP_BUFFER | HW_OWNER;
@@ -1938,8 +1938,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
dev = hw->dev[le->link];
sky2 = netdev_priv(dev);
- length = le->length;
- status = le->status;
+ length = le16_to_cpu(le->length);
+ status = le32_to_cpu(le->status);
switch (le->opcode & ~HW_OWNER) {
case OP_RXSTAT:
@@ -1983,7 +1983,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
case OP_RXCHKS:
skb = sky2->rx_ring[sky2->rx_next].skb;
skb->ip_summed = CHECKSUM_HW;
- skb->csum = le16_to_cpu(status);
+ skb->csum = status & 0xffff;
break;
case OP_TXINDEXLE:
@@ -3286,12 +3286,13 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
hw->pm_cap = pm_cap;
#ifdef __BIG_ENDIAN
- /* byte swap descriptors in hardware */
+ /* The sk98lin vendor driver uses hardware byte swapping but
+ * this driver uses software swapping.
+ */
{
u32 reg;
-
reg = sky2_pci_read32(hw, PCI_DEV_REG2);
- reg |= PCI_REV_DESC;
+ reg &= ~PCI_REV_DESC;
sky2_pci_write32(hw, PCI_DEV_REG2, reg);
}
#endif
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index be464636f07a..4c13c371bc21 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1791,21 +1791,9 @@ enum {
OP_TXINDEXLE = 0x68,
};
-/* Yukon 2 hardware interface
- * Not tested on big endian
- */
+/* Yukon 2 hardware interface */
struct sky2_tx_le {
- union {
- __le32 addr;
- struct {
- __le16 offset;
- __le16 start;
- } csum __attribute((packed));
- struct {
- __le16 size;
- __le16 rsvd;
- } tso __attribute((packed));
- } tx;
+ __le32 addr;
__le16 length; /* also vlan tag or checksum start */
u8 ctrl;
u8 opcode;
@@ -1851,8 +1839,7 @@ struct sky2_port {
u32 tx_addr64;
u16 tx_pending;
u16 tx_last_mss;
- u16 tx_csum_start;
- u16 tx_csum_offset;
+ u32 tx_tcpsum;
struct ring_info *rx_ring ____cacheline_aligned_in_smp;
struct sky2_rx_le *rx_le;
OpenPOWER on IntegriCloud