diff options
-rw-r--r-- | arch/arm/boot/dts/imx51-babbage.dts | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx53-m53evk.dts | 40 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6dl-hummingboard.dts | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6q-gw51xx.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 27 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-microsom.dtsi | 13 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6sl.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/configs/imx_v6_v7_defconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-imx/clk-imx6sl.c | 1 | ||||
-rw-r--r-- | include/dt-bindings/clock/imx6sl-clock.h | 3 |
14 files changed, 73 insertions, 48 deletions
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6bc3243a80d3..181d77fa2fa6 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -315,15 +315,15 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -468,8 +468,8 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 - MX51_PAD_GPIO1_1__SD1_WP 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0x100 + MX51_PAD_GPIO1_1__GPIO1_1 0x100 >; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 75e66c9c6144..31cfb7f2b02e 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -107,7 +107,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>; - fsl,cd-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -206,7 +206,7 @@ pinctrl_esdhc1_cd: esdhc1_cd { fsl,pins = < - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0xd5 >; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d5d146a8b149..c4956b0ffb35 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -21,27 +21,25 @@ <0xb0000000 0x20000000>; }; - soc { - display1: display@di1 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp1>; - - display-timings { - 800x480p60 { - native-mode; - clock-frequency = <31500000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <88>; - hsync-len = <128>; - vback-porch = <33>; - vfront-porch = <9>; - vsync-len = <3>; - vsync-active = <1>; - }; + display1: display@di1 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1>; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <31500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <128>; + vback-porch = <33>; + vfront-porch = <9>; + vsync-len = <3>; + vsync-active = <1>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5373a5f2782b..c8e51dd41b8f 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -143,6 +143,14 @@ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; }; + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; }; @@ -178,6 +186,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts index af4929aee075..0e1406e58eff 100644 --- a/arch/arm/boot/dts/imx6q-gw51xx.dts +++ b/arch/arm/boot/dts/imx6q-gw51xx.dts @@ -11,7 +11,7 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-gw54xx.dtsi" +#include "imx6qdl-gw51xx.dtsi" / { model = "Gateworks Ventana i.MX6 Quad GW51XX"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 25da82a03110..e8e781656b3f 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -12,6 +12,19 @@ pinctrl-0 = <&pinctrl_cubox_i_ir>; }; + pwmleds { + compatible = "pwm-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_pwm1>; + + front { + active-low; + label = "imx6:red:front"; + max-brightness = <248>; + pwms = <&pwm1 0 50000>; + }; + }; + regulators { compatible = "simple-bus"; @@ -109,6 +122,10 @@ >; }; + pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led { + fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>; + }; + pinctrl_cubox_i_spdif: cubox-i-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; @@ -117,6 +134,14 @@ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; }; + pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + /* + * The Cubox-i pulls this low, but as it's pointless + * leaving it as a pull-up, even if it is just 10uA. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>; }; @@ -153,6 +178,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 31665adcbf39..0db15af41cb1 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -161,7 +161,7 @@ status = "okay"; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 367af3ec9435..744c8a2d81f6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -220,7 +220,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { @@ -288,7 +288,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 169>; + clocks = <&clks 201>; VDDA-supply = <®_1p8v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c91b5a6c769b..adf150c1be90 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -234,7 +234,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index d729d0b15f25..79eac6849d4c 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -10,14 +10,6 @@ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; - - pinctrl_microsom_usbotg: microsom-usbotg { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; }; }; @@ -26,8 +18,3 @@ pinctrl-0 = <&pinctrl_microsom_uart1>; status = "okay"; }; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_usbotg>; -}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 2d4e5285f3f3..57d4abe03a94 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -686,7 +686,7 @@ compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; reg = <0x02188000 0x4000>; interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_ENET_REF>, + clocks = <&clks IMX6SL_CLK_ENET>, <&clks IMX6SL_CLK_ENET_REF>; clock-names = "ipg", "ahb"; status = "disabled"; diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index ef8815327e5b..59b7e45142d8 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -186,6 +186,7 @@ CONFIG_VIDEO_MX3=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=y CONFIG_SOC_CAMERA_OV2640=y +CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_BACKLIGHT_LCD_SUPPORT=y diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index 21cf06cebade..5408ca70c8d6 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -312,6 +312,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); + clks[IMX6SL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16); diff --git a/include/dt-bindings/clock/imx6sl-clock.h b/include/dt-bindings/clock/imx6sl-clock.h index 7cf5c9969336..b91dd462ba85 100644 --- a/include/dt-bindings/clock/imx6sl-clock.h +++ b/include/dt-bindings/clock/imx6sl-clock.h @@ -145,6 +145,7 @@ #define IMX6SL_CLK_USDHC4 132 #define IMX6SL_CLK_PLL4_AUDIO_DIV 133 #define IMX6SL_CLK_SPBA 134 -#define IMX6SL_CLK_END 135 +#define IMX6SL_CLK_ENET 135 +#define IMX6SL_CLK_END 136 #endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */ |