diff options
| -rw-r--r-- | arch/arm/mach-ux500/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-pins.c | 34 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-sdi.c | 52 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 78 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/cache-l2x0.c | 72 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/cpu.c | 69 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/uncompress.h | 10 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/pins-db8500.h | 142 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/pincfg.h | 5 |
10 files changed, 270 insertions, 196 deletions
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index be915a1ac404..6bd2f451c185 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -4,6 +4,7 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ id.o usb.o timer.o +obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index f26fd76f72b4..4108c7bf324e 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -153,7 +153,7 @@ static pin_cfg_t mop500_pins_default[] = { GPIO7_U1_RTSn | PIN_OUTPUT_HIGH, }; -static pin_cfg_t mop500_pins_hrefv60[] = { +static pin_cfg_t hrefv60_pins[] = { /* WLAN */ GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */ GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */ @@ -279,14 +279,26 @@ static pin_cfg_t snowball_pins[] = { void __init mop500_pins_init(void) { nmk_config_pins(mop500_pins_common, - ARRAY_SIZE(mop500_pins_common)); - if (machine_is_hrefv60()) - nmk_config_pins(mop500_pins_hrefv60, - ARRAY_SIZE(mop500_pins_hrefv60)); - else if (machine_is_snowball()) - nmk_config_pins(snowball_pins, - ARRAY_SIZE(snowball_pins)); - else - nmk_config_pins(mop500_pins_default, - ARRAY_SIZE(mop500_pins_default)); + ARRAY_SIZE(mop500_pins_common)); + + nmk_config_pins(mop500_pins_default, + ARRAY_SIZE(mop500_pins_default)); +} + +void __init snowball_pins_init(void) +{ + nmk_config_pins(mop500_pins_common, + ARRAY_SIZE(mop500_pins_common)); + + nmk_config_pins(snowball_pins, + ARRAY_SIZE(snowball_pins)); +} + +void __init hrefv60_pins_init(void) +{ + nmk_config_pins(mop500_pins_common, + ARRAY_SIZE(mop500_pins_common)); + + nmk_config_pins(hrefv60_pins, + ARRAY_SIZE(hrefv60_pins)); } diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index d0cb9e5eb87c..6826faeecc68 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -216,30 +216,48 @@ void __init mop500_sdi_init(void) /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */ - if (!machine_is_snowball()) - db8500_add_sdi2(&mop500_sdi2_data, periphid); + + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, periphid); - if (machine_is_hrefv60() || machine_is_snowball()) { - if (machine_is_hrefv60()) { - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; - } else if (machine_is_snowball()) { - mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; - mop500_sdi0_data.cd_invert = true; - sdi0_en = SNOWBALL_SDMMC_EN_GPIO; - sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; - } - sdi0_configure(); - } - /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls * mop500_sdi_tc35892_init() above. */ } + +void __init snowball_sdi_init(void) +{ + u32 periphid = 0x10480180; + + mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; + + /* On-board eMMC */ + db8500_add_sdi4(&mop500_sdi4_data, periphid); + + mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; + mop500_sdi0_data.cd_invert = true; + sdi0_en = SNOWBALL_SDMMC_EN_GPIO; + sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; + sdi0_configure(); +} + +void __init hrefv60_sdi_init(void) +{ + u32 periphid = 0x10480180; + + mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; + + db8500_add_sdi2(&mop500_sdi2_data, periphid); + + /* On-board eMMC */ + db8500_add_sdi4(&mop500_sdi4_data, periphid); + + mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; + sdi0_en = HREFV60_SDMMC_EN_GPIO; + sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + sdi0_configure(); +} diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index cd54abaccd96..6c00d4920396 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -603,28 +603,72 @@ static void __init mop500_init_machine(void) { int i2c0_devs; + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + + u8500_init_devices(); + + mop500_pins_init(); + + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + mop500_i2c_init(); + mop500_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static void __init snowball_init_machine(void) +{ + int i2c0_devs; + + u8500_init_devices(); + + snowball_pins_init(); + + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + + mop500_i2c_init(); + snowball_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static void __init hrefv60_init_machine(void) +{ + int i2c0_devs; + /* * The HREFv60 board removed a GPIO expander and routed * all these GPIO pins to the internal GPIO controller * instead. */ - if (!machine_is_snowball()) { - if (machine_is_hrefv60()) - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - else - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - } + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; u8500_init_devices(); - mop500_pins_init(); + hrefv60_pins_init(); - if (machine_is_snowball()) - platform_add_devices(snowball_platform_devs, - ARRAY_SIZE(snowball_platform_devs)); - else - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); mop500_sdi_init(); @@ -632,8 +676,8 @@ static void __init mop500_init_machine(void) mop500_uart_init(); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - if (machine_is_hrefv60()) - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -658,7 +702,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .map_io = u8500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, - .init_machine = mop500_init_machine, + .init_machine = hrefv60_init_machine, MACHINE_END MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") @@ -667,5 +711,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ .timer = &ux500_timer, - .init_machine = mop500_init_machine, + .init_machine = snowball_init_machine, MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index ee77a8970c33..de18a2a23e6e 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -40,10 +40,13 @@ struct i2c_board_info; extern void mop500_sdi_init(void); +extern void snowball_sdi_init(void); extern void mop500_sdi_tc35892_init(void); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); void __init mop500_pins_init(void); +void __init hrefv60_pins_init(void); +void __init snowball_pins_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, unsigned n); diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c new file mode 100644 index 000000000000..9d09e4d013b9 --- /dev/null +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/io.h> +#include <asm/cacheflush.h> +#include <asm/hardware/cache-l2x0.h> +#include <mach/hardware.h> +#include <mach/id.h> + +static void __iomem *l2x0_base; + +static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) +{ + /* wait for the operation to complete */ + while (readl_relaxed(reg) & mask) + cpu_relax(); +} + +static inline void ux500_cache_sync(void) +{ + writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC); + ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1); +} + +/* + * The L2 cache cannot be turned off in the non-secure world. + * Dummy until a secure service is in place. + */ +static void ux500_l2x0_disable(void) +{ +} + +/* + * This is only called when doing a kexec, just after turning off the L2 + * and L1 cache, and it is surrounded by a spinlock in the generic version. + * However, we're not really turning off the L2 cache right now and the + * PL310 does not support exclusive accesses (used to implement the spinlock). + * So, the invalidation needs to be done without the spinlock. + */ +static void ux500_l2x0_inv_all(void) +{ + uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ + + /* invalidate all ways */ + writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); + ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); + ux500_cache_sync(); +} + +static int ux500_l2x0_init(void) +{ + if (cpu_is_u5500()) + l2x0_base = __io_address(U5500_L2CC_BASE); + else if (cpu_is_u8500()) + l2x0_base = __io_address(U8500_L2CC_BASE); + else + ux500_unknown_soc(); + + /* 64KB way size, 8 way associativity, force WA */ + l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + + /* Override invalidate function */ + outer_cache.disable = ux500_l2x0_disable; + outer_cache.inv_all = ux500_l2x0_inv_all; + + return 0; +} + +early_initcall(ux500_l2x0_init); diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 797f3642fc30..1405d0eb7edb 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -12,8 +12,6 @@ #include <linux/mfd/db5500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> -#include <asm/cacheflush.h> -#include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <asm/localtimer.h> @@ -26,10 +24,6 @@ void __iomem *_PRCMU_BASE; -#ifdef CONFIG_CACHE_L2X0 -static void __iomem *l2x0_base; -#endif - void __init ux500_init_irq(void) { void __iomem *dist_base; @@ -56,66 +50,3 @@ void __init ux500_init_irq(void) prcmu_early_init(); clk_init(); } - -#ifdef CONFIG_CACHE_L2X0 -static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) -{ - /* wait for the operation to complete */ - while (readl_relaxed(reg) & mask) - ; -} - -static inline void ux500_cache_sync(void) -{ - void __iomem *base = l2x0_base; - - writel_relaxed(0, base + L2X0_CACHE_SYNC); - ux500_cache_wait(base + L2X0_CACHE_SYNC, 1); -} - -/* - * The L2 cache cannot be turned off in the non-secure world. - * Dummy until a secure service is in place. - */ -static void ux500_l2x0_disable(void) -{ -} - -/* - * This is only called when doing a kexec, just after turning off the L2 - * and L1 cache, and it is surrounded by a spinlock in the generic version. - * However, we're not really turning off the L2 cache right now and the - * PL310 does not support exclusive accesses (used to implement the spinlock). - * So, the invalidation needs to be done without the spinlock. - */ -static void ux500_l2x0_inv_all(void) -{ - void __iomem *base = l2x0_base; - uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ - - /* invalidate all ways */ - writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY); - ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask); - ux500_cache_sync(); -} - -static int ux500_l2x0_init(void) -{ - if (cpu_is_u5500()) - l2x0_base = __io_address(U5500_L2CC_BASE); - else if (cpu_is_u8500()) - l2x0_base = __io_address(U8500_L2CC_BASE); - else - ux500_unknown_soc(); - - /* 64KB way size, 8 way associativity, force WA */ - l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); - - /* Override invalidate function */ - outer_cache.disable = ux500_l2x0_disable; - outer_cache.inv_all = ux500_l2x0_inv_all; - - return 0; -} -early_initcall(ux500_l2x0_init); -#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 7dd08074c37b..6fb3c4b0105d 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -51,15 +51,9 @@ static void flush(void) static inline void arch_decomp_setup(void) { /* Check in run time if we run on an U8500 or U5500 */ - if (machine_is_u8500() || - machine_is_svp8500v1() || - machine_is_svp8500v2() || - machine_is_hrefv60() || - machine_is_snowball()) - ux500_uart_base = U8500_UART2_BASE; - else if (machine_is_u5500()) + if (machine_is_u5500()) ux500_uart_base = U5500_UART0_BASE; - else /* not much can be done to help here */ + else ux500_uart_base = U8500_UART2_BASE; } diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h index f923764ee16c..8b1d1a7a679e 100644 --- a/arch/arm/mach-ux500/pins-db8500.h +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -35,40 +35,40 @@ #define GPIO4_GPIO PIN_CFG(4, GPIO) #define GPIO4_U1_RXD PIN_CFG(4, ALT_A) -#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP) +#define GPIO4_I2C4_SCL PIN_CFG_INPUT(4, ALT_B, PULLUP) #define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) #define GPIO5_GPIO PIN_CFG(5, GPIO) #define GPIO5_U1_TXD PIN_CFG(5, ALT_A) -#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP) +#define GPIO5_I2C4_SDA PIN_CFG_INPUT(5, ALT_B, PULLUP) #define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) #define GPIO6_GPIO PIN_CFG(6, GPIO) #define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) -#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP) +#define GPIO6_I2C1_SCL PIN_CFG_INPUT(6, ALT_B, PULLUP) #define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) #define GPIO7_GPIO PIN_CFG(7, GPIO) #define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) -#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP) +#define GPIO7_I2C1_SDA PIN_CFG_INPUT(7, ALT_B, PULLUP) #define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) #define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP) -#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP) +#define GPIO8_IPI2C_SDA PIN_CFG_INPUT(8, ALT_A, PULLUP) +#define GPIO8_I2C2_SDA PIN_CFG_INPUT(8, ALT_B, PULLUP) #define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP) -#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP) +#define GPIO9_IPI2C_SCL PIN_CFG_INPUT(9, ALT_A, PULLUP) +#define GPIO9_I2C2_SCL PIN_CFG_INPUT(9, ALT_B, PULLUP) #define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP) -#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP) +#define GPIO10_IPI2C_SDA PIN_CFG_INPUT(10, ALT_A, PULLUP) +#define GPIO10_I2C2_SDA PIN_CFG_INPUT(10, ALT_B, PULLUP) #define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) #define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP) -#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP) +#define GPIO11_IPI2C_SCL PIN_CFG_INPUT(11, ALT_A, PULLUP) +#define GPIO11_I2C2_SCL PIN_CFG_INPUT(11, ALT_B, PULLUP) #define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) #define GPIO12_GPIO PIN_CFG(12, GPIO) @@ -87,66 +87,66 @@ #define GPIO16_GPIO PIN_CFG(16, GPIO) #define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) -#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP) +#define GPIO16_I2C1_SCL PIN_CFG_INPUT(16, ALT_B, PULLUP) #define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) #define GPIO17_GPIO PIN_CFG(17, GPIO) #define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) -#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP) +#define GPIO17_I2C1_SDA PIN_CFG_INPUT(17, ALT_B, PULLUP) #define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) #define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_MC0_CMDDIR PIN_CFG_PULL(18, ALT_A, UP) +#define GPIO18_MC0_CMDDIR PIN_CFG_INPUT(18, ALT_A, PULLUP) #define GPIO18_U2_RXD PIN_CFG(18, ALT_B) #define GPIO18_MS_IEP PIN_CFG(18, ALT_C) #define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC0_DAT0DIR PIN_CFG_PULL(19, ALT_A, UP) +#define GPIO19_MC0_DAT0DIR PIN_CFG_INPUT(19, ALT_A, PULLUP) #define GPIO19_U2_TXD PIN_CFG(19, ALT_B) #define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) #define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC0_DAT2DIR PIN_CFG_PULL(20, ALT_A, UP) +#define GPIO20_MC0_DAT2DIR PIN_CFG_INPUT(20, ALT_A, PULLUP) #define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) #define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) #define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC0_DAT31DIR PIN_CFG_PULL(21, ALT_A, UP) +#define GPIO21_MC0_DAT31DIR PIN_CFG_INPUT(21, ALT_A, PULLUP) #define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) #define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) #define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC0_FBCLK PIN_CFG_PULL(22, ALT_A, UP) +#define GPIO22_MC0_FBCLK PIN_CFG_INPUT(22, ALT_A, PULLUP) #define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) #define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) #define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC0_CLK PIN_CFG_PULL(23, ALT_A, UP) +#define GPIO23_MC0_CLK PIN_CFG_INPUT(23, ALT_A, PULLUP) #define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) #define GPIO23_MS_CLK PIN_CFG(23, ALT_C) #define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC0_CMD PIN_CFG_PULL(24, ALT_A, UP) +#define GPIO24_MC0_CMD PIN_CFG_INPUT(24, ALT_A, PULLUP) #define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) #define GPIO24_MS_BS PIN_CFG(24, ALT_C) #define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC0_DAT0 PIN_CFG_PULL(25, ALT_A, UP) +#define GPIO25_MC0_DAT0 PIN_CFG_INPUT(25, ALT_A, PULLUP) #define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) #define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) #define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC0_DAT1 PIN_CFG_PULL(26, ALT_A, UP) +#define GPIO26_MC0_DAT1 PIN_CFG_INPUT(26, ALT_A, PULLUP) #define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) #define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) #define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_MC0_DAT2 PIN_CFG_PULL(27, ALT_A, UP) +#define GPIO27_MC0_DAT2 PIN_CFG_INPUT(27, ALT_A, PULLUP) #define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) #define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) #define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_MC0_DAT3 PIN_CFG_PULL(28, ALT_A, UP) +#define GPIO28_MC0_DAT3 PIN_CFG_INPUT(28, ALT_A, PULLUP) #define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) #define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) @@ -357,48 +357,48 @@ #define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) #define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_MC2_CLK PIN_CFG_PULL(128, ALT_A, UP) +#define GPIO128_MC2_CLK PIN_CFG_INPUT(128, ALT_A, PULLUP) #define GPIO128_SM_CKO PIN_CFG(128, ALT_B) #define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_MC2_CMD PIN_CFG_PULL(129, ALT_A, UP) +#define GPIO129_MC2_CMD PIN_CFG_INPUT(129, ALT_A, PULLUP) #define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) #define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_MC2_FBCLK PIN_CFG_PULL(130, ALT_A, UP) +#define GPIO130_MC2_FBCLK PIN_CFG_INPUT(130, ALT_A, PULLUP) #define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) #define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) #define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_MC2_DAT0 PIN_CFG_PULL(131, ALT_A, UP) +#define GPIO131_MC2_DAT0 PIN_CFG_INPUT(131, ALT_A, PULLUP) #define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) #define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_MC2_DAT1 PIN_CFG_PULL(132, ALT_A, UP) +#define GPIO132_MC2_DAT1 PIN_CFG_INPUT(132, ALT_A, PULLUP) #define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) #define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_MC2_DAT2 PIN_CFG_PULL(133, ALT_A, UP) +#define GPIO133_MC2_DAT2 PIN_CFG_INPUT(133, ALT_A, PULLUP) #define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) #define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_MC2_DAT3 PIN_CFG_PULL(134, ALT_A, UP) +#define GPIO134_MC2_DAT3 PIN_CFG_INPUT(134, ALT_A, PULLUP) #define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) #define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_MC2_DAT4 PIN_CFG_PULL(135, ALT_A, UP) +#define GPIO135_MC2_DAT4 PIN_CFG_INPUT(135, ALT_A, PULLUP) #define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) #define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_MC2_DAT5 PIN_CFG_PULL(136, ALT_A, UP) +#define GPIO136_MC2_DAT5 PIN_CFG_INPUT(136, ALT_A, PULLUP) #define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) #define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_MC2_DAT6 PIN_CFG_PULL(137, ALT_A, UP) +#define GPIO137_MC2_DAT6 PIN_CFG_INPUT(137, ALT_A, PULLUP) #define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) #define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_MC2_DAT7 PIN_CFG_PULL(138, ALT_A, UP) +#define GPIO138_MC2_DAT7 PIN_CFG_INPUT(138, ALT_A, PULLUP) #define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) #define GPIO139_GPIO PIN_CFG(139, GPIO) @@ -434,10 +434,10 @@ #define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) #define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP) +#define GPIO147_I2C0_SCL PIN_CFG_INPUT(147, ALT_A, PULLUP) #define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP) +#define GPIO148_I2C0_SDA PIN_CFG_INPUT(148, ALT_A, PULLUP) #define GPIO149_GPIO PIN_CFG(149, GPIO) #define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) @@ -459,82 +459,82 @@ #define GPIO152_KP_O9 PIN_CFG(152, ALT_C) #define GPIO153_GPIO PIN_CFG(153, GPIO) -#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN) +#define GPIO153_KP_I7 PIN_CFG_INPUT(153, ALT_A, PULLDOWN) #define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) #define GPIO153_U2_RXD PIN_CFG(153, ALT_C) #define GPIO154_GPIO PIN_CFG(154, GPIO) -#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN) +#define GPIO154_KP_I6 PIN_CFG_INPUT(154, ALT_A, PULLDOWN) #define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) #define GPIO154_U2_TXD PIN_CFG(154, ALT_C) #define GPIO155_GPIO PIN_CFG(155, GPIO) -#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN) +#define GPIO155_KP_I5 PIN_CFG_INPUT(155, ALT_A, PULLDOWN) #define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) #define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) #define GPIO156_GPIO PIN_CFG(156, GPIO) -#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN) +#define GPIO156_KP_I4 PIN_CFG_INPUT(156, ALT_A, PULLDOWN) #define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) #define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) #define GPIO157_GPIO PIN_CFG(157, GPIO) -#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP) +#define GPIO157_KP_O7 PIN_CFG_INPUT(157, ALT_A, PULLUP) #define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) #define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) #define GPIO158_GPIO PIN_CFG(158, GPIO) -#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP) +#define GPIO158_KP_O6 PIN_CFG_INPUT(158, ALT_A, PULLUP) #define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) #define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) #define GPIO159_GPIO PIN_CFG(159, GPIO) -#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP) +#define GPIO159_KP_O5 PIN_CFG_INPUT(159, ALT_A, PULLUP) #define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) #define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) #define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP) +#define GPIO160_KP_O4 PIN_CFG_INPUT(160, ALT_A, PULLUP) #define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) #define GPIO160_NONE PIN_CFG(160, ALT_C) #define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN) +#define GPIO161_KP_I3 PIN_CFG_INPUT(161, ALT_A, PULLDOWN) #define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) #define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) #define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN) +#define GPIO162_KP_I2 PIN_CFG_INPUT(162, ALT_A, PULLDOWN) #define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) #define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) #define GPIO163_GPIO PIN_CFG(163, GPIO) -#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN) +#define GPIO163_KP_I1 PIN_CFG_INPUT(163, ALT_A, PULLDOWN) #define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) #define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) #define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP) +#define GPIO164_KP_I0 PIN_CFG_INPUT(164, ALT_A, PULLUP) #define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) #define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) #define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP) +#define GPIO165_KP_O3 PIN_CFG_INPUT(165, ALT_A, PULLUP) #define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) #define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) #define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP) +#define GPIO166_KP_O2 PIN_CFG_INPUT(166, ALT_A, PULLUP) #define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) #define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) #define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP) +#define GPIO167_KP_O1 PIN_CFG_INPUT(167, ALT_A, PULLUP) #define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) #define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) #define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP) +#define GPIO168_KP_O0 PIN_CFG_INPUT(168, ALT_A, PULLUP) #define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) #define GPIO168_NONE PIN_CFG(168, ALT_C) @@ -569,39 +569,39 @@ #define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) #define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC4_DAT3 PIN_CFG_PULL(197, ALT_A, UP) +#define GPIO197_MC4_DAT3 PIN_CFG_INPUT(197, ALT_A, PULLUP) #define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC4_DAT2 PIN_CFG_PULL(198, ALT_A, UP) +#define GPIO198_MC4_DAT2 PIN_CFG_INPUT(198, ALT_A, PULLUP) #define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC4_DAT1 PIN_CFG_PULL(199, ALT_A, UP) +#define GPIO199_MC4_DAT1 PIN_CFG_INPUT(199, ALT_A, PULLUP) #define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_MC4_DAT0 PIN_CFG_PULL(200, ALT_A, UP) +#define GPIO200_MC4_DAT0 PIN_CFG_INPUT(200, ALT_A, PULLUP) #define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_MC4_CMD PIN_CFG_PULL(201, ALT_A, UP) +#define GPIO201_MC4_CMD PIN_CFG_INPUT(201, ALT_A, PULLUP) #define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_MC4_FBCLK PIN_CFG_PULL(202, ALT_A, UP) +#define GPIO202_MC4_FBCLK PIN_CFG_INPUT(202, ALT_A, PULLUP) #define GPIO202_PWL PIN_CFG(202, ALT_B) #define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) #define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_MC4_CLK PIN_CFG_PULL(203, ALT_A, UP) +#define GPIO203_MC4_CLK PIN_CFG_INPUT(203, ALT_A, PULLUP) #define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_MC4_DAT7 PIN_CFG_PULL(204, ALT_A, UP) +#define GPIO204_MC4_DAT7 PIN_CFG_INPUT(204, ALT_A, PULLUP) #define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_MC4_DAT6 PIN_CFG_PULL(205, ALT_A, UP) +#define GPIO205_MC4_DAT6 PIN_CFG_INPUT(205, ALT_A, PULLUP) #define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_MC4_DAT5 PIN_CFG_PULL(206, ALT_A, UP) +#define GPIO206_MC4_DAT5 PIN_CFG_INPUT(206, ALT_A, PULLUP) #define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_MC4_DAT4 PIN_CFG_PULL(207, ALT_A, UP) +#define GPIO207_MC4_DAT4 PIN_CFG_INPUT(207, ALT_A, PULLUP) #define GPIO208_GPIO PIN_CFG(208, GPIO) #define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) @@ -632,21 +632,25 @@ #define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) #define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) #define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) +#define GPIO215_SPI2_TXD PIN_CFG(215, ALT_C) #define GPIO216_GPIO PIN_CFG(216, GPIO) #define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) #define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) -#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP) +#define GPIO216_I2C3_SDA PIN_CFG_INPUT(216, ALT_C, PULLUP) +#define GPIO216_SPI2_FRM PIN_CFG(216, ALT_C) #define GPIO217_GPIO PIN_CFG(217, GPIO) #define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) #define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) #define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) +#define GPIO217_SPI2_CLK PIN_CFG(217, ALT_C) #define GPIO218_GPIO PIN_CFG(218, GPIO) #define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) #define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) -#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP) +#define GPIO218_I2C3_SCL PIN_CFG_INPUT(218, ALT_C, PULLUP) +#define GPIO218_SPI2_RXD PIN_CFG(218, ALT_C) #define GPIO219_GPIO PIN_CFG(219, GPIO) #define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) @@ -694,12 +698,12 @@ #define GPIO229_GPIO PIN_CFG(229, GPIO) #define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) #define GPIO229_PWL PIN_CFG(229, ALT_B) -#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP) +#define GPIO229_I2C3_SDA PIN_CFG_INPUT(229, ALT_C, PULLUP) #define GPIO230_GPIO PIN_CFG(230, GPIO) #define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) #define GPIO230_PWL PIN_CFG(230, ALT_B) -#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP) +#define GPIO230_I2C3_SCL PIN_CFG_INPUT(230, ALT_C, PULLUP) #define GPIO256_GPIO PIN_CFG(256, GPIO) #define GPIO256_USB_NXT PIN_CFG(256, ALT_A) diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h index 05a3936ae6d1..22cb97d2d8ad 100644 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -37,7 +37,6 @@ * SLPM value = same as normal * * PIN_CFG - default config with alternate function - * PIN_CFG_PULL - default config with alternate function and pull up/down */ typedef unsigned long pin_cfg_t; @@ -133,10 +132,6 @@ typedef unsigned long pin_cfg_t; (PIN_CFG_DEFAULT |\ (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) -#define PIN_CFG_PULL(num, alt, pull) \ - ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ - (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) - extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); extern int nmk_config_pins(pin_cfg_t *cfgs, int num); extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); |
