summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/net/rndis_host.c112
1 files changed, 84 insertions, 28 deletions
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
index 1d36772ba6e1..980e4aaa97aa 100644
--- a/drivers/usb/net/rndis_host.c
+++ b/drivers/usb/net/rndis_host.c
@@ -253,6 +253,7 @@ struct rndis_keepalive_c { /* IN (optionally OUT) */
* of that mess as possible.
*/
#define OID_802_3_PERMANENT_ADDRESS ccpu2(0x01010101)
+#define OID_GEN_MAXIMUM_FRAME_SIZE ccpu2(0x00010106)
#define OID_GEN_CURRENT_PACKET_FILTER ccpu2(0x0001010e)
/*
@@ -349,7 +350,7 @@ static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
case RNDIS_MSG_INDICATE: { /* fault */
// struct rndis_indicate *msg = (void *)buf;
dev_info(&info->control->dev,
- "rndis fault indication\n");
+ "rndis fault indication\n");
}
break;
case RNDIS_MSG_KEEPALIVE: { /* ping */
@@ -387,6 +388,71 @@ static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
return -ETIMEDOUT;
}
+/*
+ * rndis_query:
+ *
+ * Performs a query for @oid along with 0 or more bytes of payload as
+ * specified by @in_len. If @reply_len is not set to -1 then the reply
+ * length is checked against this value, resulting in an error if it
+ * doesn't match.
+ *
+ * NOTE: Adding a payload exactly or greater than the size of the expected
+ * response payload is an evident requirement MSFT added for ActiveSync.
+ *
+ * The only exception is for OIDs that return a variably sized response,
+ * in which case no payload should be added. This undocumented (and
+ * nonsensical!) issue was found by sniffing protocol requests from the
+ * ActiveSync 4.1 Windows driver.
+ */
+static int rndis_query(struct usbnet *dev, struct usb_interface *intf,
+ void *buf, u32 oid, u32 in_len,
+ void **reply, int *reply_len)
+{
+ int retval;
+ union {
+ void *buf;
+ struct rndis_msg_hdr *header;
+ struct rndis_query *get;
+ struct rndis_query_c *get_c;
+ } u;
+ u32 off, len;
+
+ u.buf = buf;
+
+ memset(u.get, 0, sizeof *u.get + in_len);
+ u.get->msg_type = RNDIS_MSG_QUERY;
+ u.get->msg_len = cpu_to_le32(sizeof *u.get + in_len);
+ u.get->oid = oid;
+ u.get->len = cpu_to_le32(in_len);
+ u.get->offset = ccpu2(20);
+
+ retval = rndis_command(dev, u.header);
+ if (unlikely(retval < 0)) {
+ dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n",
+ oid, retval);
+ return retval;
+ }
+
+ off = le32_to_cpu(u.get_c->offset);
+ len = le32_to_cpu(u.get_c->len);
+ if (unlikely((8 + off + len) > CONTROL_BUFFER_SIZE))
+ goto response_error;
+
+ if (*reply_len != -1 && len != *reply_len)
+ goto response_error;
+
+ *reply = (unsigned char *) &u.get_c->request_id + off;
+ *reply_len = len;
+
+ return retval;
+
+response_error:
+ dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) "
+ "invalid response - off %d len %d\n",
+ oid, off, len);
+ return -EDOM;
+}
+
static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
{
int retval;
@@ -403,6 +469,8 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
struct rndis_set_c *set_c;
} u;
u32 tmp;
+ int reply_len;
+ unsigned char *bp;
/* we can't rely on i/o from stack working, or stack allocation */
u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL);
@@ -421,6 +489,12 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
* TX we'll stick to one Ethernet packet plus RNDIS framing.
* For RX we handle drivers that zero-pad to end-of-packet.
* Don't let userspace change these settings.
+ *
+ * NOTE: there still seems to be wierdness here, as if we need
+ * to do some more things to make sure WinCE targets accept this.
+ * They default to jumbograms of 8KB or 16KB, which is absurd
+ * for such low data rates and which is also more than Linux
+ * can usually expect to allocate for SKB data...
*/
net->hard_header_len += sizeof (struct rndis_data_hdr);
dev->hard_mtu = net->mtu + net->hard_header_len;
@@ -434,7 +508,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
if (unlikely(retval < 0)) {
/* it might not even be an RNDIS device!! */
dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
- goto fail_and_release;
+ goto fail_and_release;
}
tmp = le32_to_cpu(u.init_c->max_transfer_size);
if (tmp < dev->hard_mtu) {
@@ -450,34 +524,15 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
dev->hard_mtu, tmp, dev->rx_urb_size,
1 << le32_to_cpu(u.init_c->packet_alignment));
- /* Get designated host ethernet address.
- *
- * Adding a payload exactly the same size as the expected response
- * payload is an evident requirement MSFT added for ActiveSync.
- * This undocumented (and nonsensical) issue was found by sniffing
- * protocol requests from the ActiveSync 4.1 Windows driver.
- */
- memset(u.get, 0, sizeof *u.get + 48);
- u.get->msg_type = RNDIS_MSG_QUERY;
- u.get->msg_len = ccpu2(sizeof *u.get + 48);
- u.get->oid = OID_802_3_PERMANENT_ADDRESS;
- u.get->len = ccpu2(48);
- u.get->offset = ccpu2(20);
-
- retval = rndis_command(dev, u.header);
- if (unlikely(retval < 0)) {
+ /* Get designated host ethernet address */
+ reply_len = ETH_ALEN;
+ retval = rndis_query(dev, intf, u.buf, OID_802_3_PERMANENT_ADDRESS,
+ 48, (void **) &bp, &reply_len);
+ if (unlikely(retval< 0)) {
dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
goto fail_and_release;
}
- tmp = le32_to_cpu(u.get_c->offset);
- if (unlikely((tmp + 8) > (CONTROL_BUFFER_SIZE - ETH_ALEN)
- || u.get_c->len != ccpu2(ETH_ALEN))) {
- dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n",
- tmp, le32_to_cpu(u.get_c->len));
- retval = -EDOM;
- goto fail_and_release;
- }
- memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN);
+ memcpy(net->dev_addr, bp, ETH_ALEN);
/* set a nonzero filter to enable data transfers */
memset(u.set, 0, sizeof *u.set);
@@ -502,6 +557,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
fail_and_release:
usb_set_intfdata(info->data, NULL);
usb_driver_release_interface(driver_of(intf), info->data);
+ info->data = NULL;
fail:
kfree(u.buf);
return retval;
@@ -618,7 +674,7 @@ fill:
static const struct driver_info rndis_info = {
.description = "RNDIS device",
- .flags = FLAG_ETHER | FLAG_FRAMING_RN,
+ .flags = FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT,
.bind = rndis_bind,
.unbind = rndis_unbind,
.status = rndis_status,
OpenPOWER on IntegriCloud